( pcb2gcode 2.5.0 ) ( Software-independent Gcode ) G94 ( Millimeters per minute feed rate. ) G21 ( Units == Millimeters. ) G90 ( Absolute coordinates. ) G00 S20000 ( RPM spindle speed. ) G64 P0.05000 ( set maximum deviation from commanded toolpath ) G01 F400.00000 ( Feedrate. ) G00 Z30.00000 (Retract to tool change height) T1 M5 (Spindle stop.) G04 P1.00000 (Wait for spindle to stop) (MSG, Change tool bit to mill diameter 0.80000mm) M6 (Tool change.) M0 (Temporary machine stop.) M3 ( Spindle on clockwise. ) G04 P1.00000 (Wait for spindle to get up to speed) G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-0.12546 Y0.72452 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-0.12546 Y0.72452 G01 X-0.12546 Y78.06551 G01 X-0.13552 Y78.15456 G01 X-0.15523 Y78.24090 G01 X-0.18479 Y78.32543 G01 X-0.23244 Y78.40125 G01 X-0.28766 Y78.47049 G01 X-0.35098 Y78.53381 G01 X-0.42680 Y78.58146 G01 X-0.50658 Y78.61989 G01 X-0.56937 Y78.64387 G01 X-0.63529 Y78.65700 G01 X-0.67958 Y78.66200 G01 X-0.72449 Y78.66454 G01 X-36.02099 Y78.66454 G01 X-36.11002 Y78.65448 G01 X-36.19635 Y78.63477 G01 X-36.28088 Y78.60521 G01 X-36.35670 Y78.55756 G01 X-36.42594 Y78.50234 G01 X-36.48927 Y78.43902 G01 X-36.53692 Y78.36320 G01 X-36.57535 Y78.28342 G01 X-36.59932 Y78.22063 G01 X-36.61246 Y78.15471 G01 X-36.61746 Y78.11042 G01 X-36.62000 Y78.06551 G01 X-36.62000 Y68.84584 G01 X-47.09625 Y63.29960 G01 X-47.17030 Y63.24905 G01 X-47.23738 Y63.19122 G01 X-47.29821 Y63.12553 G01 X-47.34291 Y63.04799 G01 X-47.37827 Y62.96681 G01 X-47.39890 Y62.90684 G01 X-47.40979 Y62.84438 G01 X-47.41325 Y62.80750 G01 X-47.41500 Y62.77019 G01 X-47.41500 Y0.72452 G01 X-47.40494 Y0.63549 G01 X-47.38523 Y0.54915 G01 X-47.35566 Y0.46462 G01 X-47.30801 Y0.38880 G01 X-47.25279 Y0.31956 G01 X-47.18945 Y0.25622 G01 X-47.11360 Y0.20857 G01 X-47.03380 Y0.17014 G01 X-46.97106 Y0.14618 G01 X-46.90517 Y0.13305 G01 X-46.86090 Y0.12805 G01 X-46.81599 Y0.12551 G01 X-0.72449 Y0.12551 G01 X-0.63544 Y0.13557 G01 X-0.54910 Y0.15528 G01 X-0.46457 Y0.18484 G01 X-0.38875 Y0.23249 G01 X-0.31951 Y0.28771 G01 X-0.25619 Y0.35103 G01 X-0.20854 Y0.42685 G01 X-0.17011 Y0.50663 G01 X-0.14613 Y0.56942 G01 X-0.13300 Y0.63534 G01 X-0.12800 Y0.67963 G01 X-0.12546 Y0.72452 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-3.23950 Y5.59961 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-3.23950 Y5.59961 G01 X-3.23950 Y5.88054 G01 X-3.24227 Y5.90528 G01 X-3.27092 Y6.15953 G01 X-3.33343 Y6.43334 G01 X-3.42619 Y6.69844 G01 X-3.54803 Y6.95148 G01 X-3.69743 Y7.18927 G01 X-3.87254 Y7.40883 G01 X-4.07117 Y7.60746 G01 X-4.29073 Y7.78257 G01 X-4.52852 Y7.93197 G01 X-4.78156 Y8.05381 G01 X-5.04666 Y8.14657 G01 X-5.32047 Y8.20908 G01 X-5.57472 Y8.23773 G01 X-5.59946 Y8.24050 G01 X-5.88044 Y8.24050 G01 X-5.91323 Y8.23682 G01 X-6.15946 Y8.20908 G01 X-6.43329 Y8.14657 G01 X-6.69837 Y8.05381 G01 X-6.95143 Y7.93197 G01 X-7.18920 Y7.78257 G01 X-7.40878 Y7.60746 G01 X-7.60741 Y7.40883 G01 X-7.78249 Y7.18927 G01 X-7.93192 Y6.95148 G01 X-8.05376 Y6.69844 G01 X-8.14652 Y6.43334 G01 X-8.20901 Y6.15956 G01 X-8.24045 Y5.88044 G01 X-8.24045 Y5.59961 G01 X-8.20901 Y5.32049 G01 X-8.14652 Y5.04673 G01 X-8.05376 Y4.78161 G01 X-7.93192 Y4.52857 G01 X-7.78249 Y4.29078 G01 X-7.60741 Y4.07125 G01 X-7.40878 Y3.87259 G01 X-7.18922 Y3.69751 G01 X-6.95143 Y3.54808 G01 X-6.69839 Y3.42624 G01 X-6.43329 Y3.33350 G01 X-6.15951 Y3.27102 G01 X-5.88039 Y3.23957 G01 X-5.59956 Y3.23957 G01 X-5.32044 Y3.27102 G01 X-5.04666 Y3.33350 G01 X-4.78156 Y3.42624 G01 X-4.52852 Y3.54808 G01 X-4.29073 Y3.69751 G01 X-4.07117 Y3.87259 G01 X-3.87254 Y4.07125 G01 X-3.69743 Y4.29080 G01 X-3.54803 Y4.52857 G01 X-3.42619 Y4.78163 G01 X-3.33343 Y5.04673 G01 X-3.27094 Y5.32052 G01 X-3.23950 Y5.59961 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-2.33691 Y32.83581 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-2.33691 Y32.83581 G01 X-2.35997 Y32.60169 G01 X-2.37526 Y32.52478 G01 X-2.44356 Y32.29969 G01 X-2.47356 Y32.22722 G01 X-2.58446 Y32.01978 G01 X-2.62802 Y31.95458 G01 X-2.77724 Y31.77274 G01 X-2.83269 Y31.71729 G01 X-3.01455 Y31.56804 G01 X-3.07976 Y31.52448 G01 X-3.28720 Y31.41358 G01 X-3.35966 Y31.38359 G01 X-3.58476 Y31.31529 G01 X-3.66167 Y31.29999 G01 X-3.89578 Y31.27693 G01 X-3.97419 Y31.27693 G01 X-4.20830 Y31.29999 G01 X-4.28522 Y31.31529 G01 X-4.51031 Y31.38359 G01 X-4.58278 Y31.41358 G01 X-4.79022 Y31.52448 G01 X-4.85542 Y31.56804 G01 X-5.03728 Y31.71729 G01 X-5.09273 Y31.77274 G01 X-5.24196 Y31.95458 G01 X-5.25562 Y31.97502 G01 X-7.47500 Y31.97502 G01 X-7.51419 Y31.97696 G01 X-7.61173 Y31.98656 G01 X-7.68864 Y32.00187 G01 X-7.78244 Y32.03032 G01 X-7.85488 Y32.06032 G01 X-7.94132 Y32.10652 G01 X-8.00652 Y32.15008 G01 X-8.08229 Y32.21226 G01 X-8.11137 Y32.23863 G01 X-9.05368 Y33.18092 G01 X-9.11276 Y33.13243 G01 X-9.18190 Y33.09547 G01 X-9.25696 Y33.07269 G01 X-9.28498 Y33.06994 G01 X-9.28498 Y18.18600 G01 X-9.28691 Y18.14681 G01 X-9.29653 Y18.04927 G01 X-9.31182 Y17.97236 G01 X-9.34027 Y17.87856 G01 X-9.37027 Y17.80612 G01 X-9.41647 Y17.71968 G01 X-9.46006 Y17.65448 G01 X-9.52224 Y17.57871 G01 X-9.54860 Y17.54963 G01 X-11.55838 Y15.53983 G01 X-11.55759 Y15.53719 G01 X-11.54227 Y15.46030 G01 X-11.52691 Y15.30422 G01 X-11.52691 Y15.22581 G01 X-11.54227 Y15.06972 G01 X-11.55759 Y14.99284 G01 X-11.60311 Y14.84275 G01 X-11.63310 Y14.77031 G01 X-11.70704 Y14.63201 G01 X-11.75061 Y14.56680 G01 X-11.82498 Y14.47618 G01 X-11.82498 Y12.24385 G01 X-11.75061 Y12.15322 G01 X-11.70704 Y12.08802 G01 X-11.63310 Y11.94972 G01 X-11.60311 Y11.87727 G01 X-11.55759 Y11.72719 G01 X-11.54227 Y11.65030 G01 X-11.52691 Y11.49422 G01 X-11.52691 Y11.41581 G01 X-11.54227 Y11.25972 G01 X-11.55759 Y11.18284 G01 X-11.60311 Y11.03275 G01 X-11.63310 Y10.96031 G01 X-11.70704 Y10.82201 G01 X-11.75061 Y10.75680 G01 X-11.85010 Y10.63557 G01 X-11.90555 Y10.58012 G01 X-12.02678 Y10.48063 G01 X-12.09198 Y10.43707 G01 X-12.23028 Y10.36313 G01 X-12.30273 Y10.33313 G01 X-12.45281 Y10.28762 G01 X-12.52970 Y10.27230 G01 X-12.68578 Y10.25693 G01 X-12.76419 Y10.25693 G01 X-12.92028 Y10.27230 G01 X-12.99716 Y10.28762 G01 X-13.14725 Y10.33313 G01 X-13.21969 Y10.36313 G01 X-13.35799 Y10.43707 G01 X-13.42320 Y10.48063 G01 X-13.54443 Y10.58012 G01 X-13.59988 Y10.63557 G01 X-13.69937 Y10.75680 G01 X-13.74293 Y10.82201 G01 X-13.81687 Y10.96031 G01 X-13.84687 Y11.03275 G01 X-13.89238 Y11.18284 G01 X-13.90770 Y11.25972 G01 X-13.92307 Y11.41581 G01 X-13.92307 Y11.49422 G01 X-13.90770 Y11.65030 G01 X-13.89238 Y11.72719 G01 X-13.84687 Y11.87727 G01 X-13.81687 Y11.94972 G01 X-13.74293 Y12.08802 G01 X-13.69937 Y12.15322 G01 X-13.62500 Y12.24385 G01 X-13.62500 Y14.47618 G01 X-13.69937 Y14.56680 G01 X-13.74293 Y14.63201 G01 X-13.81687 Y14.77031 G01 X-13.84687 Y14.84275 G01 X-13.89238 Y14.99284 G01 X-13.90770 Y15.06972 G01 X-13.92307 Y15.22581 G01 X-13.92307 Y15.30422 G01 X-13.90770 Y15.46030 G01 X-13.89238 Y15.53719 G01 X-13.84687 Y15.68727 G01 X-13.81687 Y15.75972 G01 X-13.74293 Y15.89802 G01 X-13.69937 Y15.96322 G01 X-13.59988 Y16.08445 G01 X-13.54443 Y16.13990 G01 X-13.42320 Y16.23939 G01 X-13.36531 Y16.27808 G01 X-13.36137 Y16.28240 G01 X-11.08500 Y18.55880 G01 X-11.08500 Y33.06994 G01 X-11.11301 Y33.07269 G01 X-11.18807 Y33.09547 G01 X-11.25721 Y33.13243 G01 X-11.31784 Y33.18216 G01 X-11.35998 Y33.23352 G01 X-11.36757 Y33.24279 G01 X-11.40453 Y33.31193 G01 X-11.42731 Y33.38699 G01 X-11.43498 Y33.46501 G01 X-11.43498 Y35.16501 G01 X-11.42731 Y35.24304 G01 X-11.40453 Y35.31810 G01 X-11.36757 Y35.38724 G01 X-11.31784 Y35.44787 G01 X-11.25721 Y35.49760 G01 X-11.18807 Y35.53456 G01 X-11.11301 Y35.55734 G01 X-11.03499 Y35.56501 G01 X-9.33499 Y35.56501 G01 X-9.25696 Y35.55734 G01 X-9.18190 Y35.53456 G01 X-9.11276 Y35.49760 G01 X-9.05213 Y35.44787 G01 X-9.00240 Y35.38724 G01 X-8.96544 Y35.31810 G01 X-8.94266 Y35.24304 G01 X-8.93992 Y35.21502 G01 X-8.91500 Y35.21502 G01 X-8.87578 Y35.21309 G01 X-8.77825 Y35.20349 G01 X-8.70134 Y35.18818 G01 X-8.60753 Y35.15973 G01 X-8.53509 Y35.12973 G01 X-8.44866 Y35.08353 G01 X-8.38345 Y35.03997 G01 X-8.30769 Y34.97779 G01 X-8.27860 Y34.95142 G01 X-7.10220 Y33.77505 G01 X-5.25560 Y33.77505 G01 X-5.24196 Y33.79544 G01 X-5.09273 Y33.97731 G01 X-5.03728 Y34.03276 G01 X-4.85542 Y34.18198 G01 X-4.79022 Y34.22554 G01 X-4.58278 Y34.33644 G01 X-4.51031 Y34.36643 G01 X-4.28522 Y34.43474 G01 X-4.20830 Y34.45003 G01 X-3.97419 Y34.47309 G01 X-3.89578 Y34.47309 G01 X-3.66167 Y34.45003 G01 X-3.58476 Y34.43474 G01 X-3.35966 Y34.36643 G01 X-3.28720 Y34.33644 G01 X-3.07976 Y34.22554 G01 X-3.01455 Y34.18198 G01 X-2.83269 Y34.03276 G01 X-2.77724 Y33.97731 G01 X-2.62802 Y33.79544 G01 X-2.58446 Y33.73027 G01 X-2.47356 Y33.52280 G01 X-2.44356 Y33.45036 G01 X-2.37526 Y33.22524 G01 X-2.35997 Y33.14833 G01 X-2.33691 Y32.91422 G01 X-2.33691 Y32.83581 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-2.33038 Y32.87502 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-2.33038 Y32.87502 G01 X-2.34671 Y33.10337 G01 X-2.39538 Y33.32709 G01 X-2.47539 Y33.54160 G01 X-2.58509 Y33.74251 G01 X-2.72233 Y33.92582 G01 X-2.88420 Y34.08770 G01 X-2.96142 Y34.14551 G01 X-2.97107 Y34.15295 G01 X-2.98059 Y34.16054 G01 X-3.05146 Y34.23362 G01 X-3.10452 Y34.30451 G01 X-3.14981 Y34.38175 G01 X-3.17678 Y34.46712 G01 X-3.19385 Y34.55404 G01 X-3.20117 Y34.64337 G01 X-3.18842 Y34.73207 G01 X-3.16607 Y34.81777 G01 X-3.13391 Y34.90133 G01 X-3.08397 Y34.97565 G01 X-3.02667 Y35.04317 G01 X-2.96142 Y35.10453 G01 X-2.88420 Y35.16234 G01 X-2.72230 Y35.32424 G01 X-2.58509 Y35.50750 G01 X-2.47539 Y35.70844 G01 X-2.39538 Y35.92297 G01 X-2.34671 Y36.14670 G01 X-2.33038 Y36.37502 G01 X-2.34671 Y36.60336 G01 X-2.39538 Y36.82709 G01 X-2.47539 Y37.04161 G01 X-2.58509 Y37.24250 G01 X-2.72233 Y37.42581 G01 X-2.88420 Y37.58771 G01 X-2.96142 Y37.64552 G01 X-2.97056 Y37.65256 G01 X-2.98009 Y37.66013 G01 X-3.05151 Y37.73366 G01 X-3.10457 Y37.80458 G01 X-3.14983 Y37.88179 G01 X-3.17678 Y37.96711 G01 X-3.19385 Y38.05401 G01 X-3.20117 Y38.14334 G01 X-3.18842 Y38.23206 G01 X-3.16607 Y38.31776 G01 X-3.13391 Y38.40133 G01 X-3.08397 Y38.47565 G01 X-3.02667 Y38.54316 G01 X-2.96147 Y38.60450 G01 X-2.88423 Y38.66236 G01 X-2.72230 Y38.82426 G01 X-2.58509 Y39.00752 G01 X-2.47539 Y39.20846 G01 X-2.39538 Y39.42297 G01 X-2.34671 Y39.64669 G01 X-2.33038 Y39.87501 G01 X-2.34671 Y40.10336 G01 X-2.39538 Y40.32708 G01 X-2.47539 Y40.54161 G01 X-2.58509 Y40.74255 G01 X-2.73201 Y40.93879 G01 X-2.76480 Y40.99035 G01 X-2.79332 Y41.04387 G01 X-2.82233 Y41.11341 G01 X-2.83780 Y41.18717 G01 X-2.84773 Y41.27518 G01 X-2.84775 Y41.36480 G01 X-2.82779 Y41.45217 G01 X-2.79853 Y41.53576 G01 X-2.75969 Y41.61641 G01 X-2.70389 Y41.68641 G01 X-2.64128 Y41.74905 G01 X-2.57120 Y41.80495 G01 X-2.48367 Y41.85994 G01 X-2.41989 Y41.92372 G01 X-2.37183 Y42.00018 G01 X-2.34204 Y42.08534 G01 X-2.33450 Y42.15250 G01 X-2.33450 Y44.59753 G01 X-2.34204 Y44.66474 G01 X-2.37183 Y44.74988 G01 X-2.41989 Y44.82633 G01 X-2.48367 Y44.89011 G01 X-2.56010 Y44.93814 G01 X-2.64529 Y44.96794 G01 X-2.71250 Y44.97551 G01 X-5.15748 Y44.97551 G01 X-5.22468 Y44.96796 G01 X-5.30983 Y44.93817 G01 X-5.38628 Y44.89011 G01 X-5.45006 Y44.82633 G01 X-5.49812 Y44.74988 G01 X-5.52374 Y44.67665 G01 X-5.55115 Y44.61536 G01 X-5.58338 Y44.55702 G01 X-5.62786 Y44.49240 G01 X-5.68412 Y44.43771 G01 X-5.75336 Y44.38249 G01 X-5.82920 Y44.33484 G01 X-5.91374 Y44.30525 G01 X-6.00010 Y44.28554 G01 X-6.08912 Y44.27551 G01 X-7.16484 Y44.27551 G01 X-7.30484 Y44.25333 G01 X-7.37228 Y44.23144 G01 X-7.43967 Y44.20954 G01 X-7.56596 Y44.14521 G01 X-7.68061 Y44.06189 G01 X-8.26192 Y43.48059 G01 X-8.27804 Y43.46532 G01 X-8.29468 Y43.45044 G01 X-8.38785 Y43.38816 G01 X-8.46766 Y43.34973 G01 X-8.55219 Y43.32014 G01 X-8.64121 Y43.31011 G01 X-8.72976 Y43.31011 G01 X-8.81876 Y43.32014 G01 X-8.90329 Y43.34973 G01 X-8.93270 Y43.36388 G01 X-8.98310 Y43.38816 G01 X-9.05894 Y43.43581 G01 X-9.12229 Y43.49916 G01 X-9.17751 Y43.56840 G01 X-9.22516 Y43.64424 G01 X-9.25475 Y43.72877 G01 X-9.27446 Y43.81513 G01 X-9.28449 Y43.90413 G01 X-9.28449 Y58.87591 G01 X-9.30664 Y59.01589 G01 X-9.35046 Y59.15069 G01 X-9.39442 Y59.23702 G01 X-9.41457 Y59.27655 G01 X-9.41477 Y59.27695 G01 X-9.49811 Y59.39166 G01 X-11.02320 Y60.91675 G01 X-11.03702 Y60.93128 G01 X-11.05048 Y60.94616 G01 X-11.11225 Y61.03692 G01 X-11.15157 Y61.11629 G01 X-11.18208 Y61.20047 G01 X-11.21969 Y61.35714 G01 X-11.29203 Y61.53173 G01 X-11.37621 Y61.66915 G01 X-11.38622 Y61.68642 G01 X-11.39584 Y61.70405 G01 X-11.43476 Y61.80684 G01 X-11.45444 Y61.89318 G01 X-11.46447 Y61.98208 G01 X-11.46447 Y63.79795 G01 X-11.46397 Y63.81768 G01 X-11.46298 Y63.83775 G01 X-11.44248 Y63.94593 G01 X-11.41416 Y64.02985 G01 X-11.37621 Y64.11095 G01 X-11.29201 Y64.24832 G01 X-11.21969 Y64.42292 G01 X-11.17560 Y64.60661 G01 X-11.16077 Y64.79503 G01 X-11.17560 Y64.98342 G01 X-11.21969 Y65.16716 G01 X-11.29201 Y65.34173 G01 X-11.39074 Y65.50285 G01 X-11.51347 Y65.64653 G01 X-11.65716 Y65.76927 G01 X-11.81827 Y65.86800 G01 X-11.99285 Y65.94031 G01 X-12.17656 Y65.98441 G01 X-12.36498 Y65.99924 G01 X-12.55337 Y65.98441 G01 X-12.63590 Y65.96459 G01 X-12.73709 Y65.94031 G01 X-12.91169 Y65.86800 G01 X-13.07278 Y65.76927 G01 X-13.21646 Y65.64653 G01 X-13.33920 Y65.50285 G01 X-13.43793 Y65.34173 G01 X-13.51024 Y65.16714 G01 X-13.55436 Y64.98339 G01 X-13.56919 Y64.79503 G01 X-13.55436 Y64.60666 G01 X-13.51024 Y64.42292 G01 X-13.43793 Y64.24832 G01 X-13.36836 Y64.13480 G01 X-13.35368 Y64.11083 G01 X-13.34364 Y64.09345 G01 X-13.33402 Y64.07580 G01 X-13.29523 Y63.97334 G01 X-13.27552 Y63.88700 G01 X-13.26546 Y63.79795 G01 X-13.26546 Y61.98208 G01 X-13.26599 Y61.96186 G01 X-13.26701 Y61.94179 G01 X-13.28751 Y61.83410 G01 X-13.31583 Y61.75020 G01 X-13.35375 Y61.66915 G01 X-13.43793 Y61.53176 G01 X-13.51024 Y61.35714 G01 X-13.55436 Y61.17339 G01 X-13.56919 Y60.98503 G01 X-13.55436 Y60.79666 G01 X-13.51024 Y60.61292 G01 X-13.43793 Y60.43832 G01 X-13.33922 Y60.27723 G01 X-13.21649 Y60.13352 G01 X-13.07278 Y60.01078 G01 X-12.91169 Y59.91205 G01 X-12.73709 Y59.83974 G01 X-12.58042 Y59.80215 G01 X-12.56089 Y59.79691 G01 X-12.54164 Y59.79125 G01 X-12.44176 Y59.74624 G01 X-12.36676 Y59.69912 G01 X-12.29668 Y59.64324 G01 X-11.26092 Y58.60746 G01 X-11.21759 Y58.55615 G01 X-11.17900 Y58.50179 G01 X-11.14009 Y58.43367 G01 X-11.11522 Y58.35930 G01 X-11.09551 Y58.27297 G01 X-11.08546 Y58.18391 G01 X-11.08546 Y49.50390 G01 X-11.09074 Y49.43913 G01 X-11.10118 Y49.37552 G01 X-11.12102 Y49.30080 G01 X-11.15485 Y49.23130 G01 X-11.20113 Y49.15579 G01 X-11.25622 Y49.08513 G01 X-11.32564 Y49.02848 G01 X-11.40011 Y48.98053 G01 X-11.48030 Y48.94080 G01 X-11.49153 Y48.93811 G01 X-11.56732 Y48.91990 G01 X-11.65520 Y48.90898 G01 X-11.74484 Y48.90796 G01 X-11.83244 Y48.92691 G01 X-11.91637 Y48.95523 G01 X-11.99747 Y48.99318 G01 X-12.17829 Y49.10400 G01 X-12.35284 Y49.17631 G01 X-12.53658 Y49.22041 G01 X-12.72497 Y49.23524 G01 X-12.91337 Y49.22041 G01 X-12.99589 Y49.20059 G01 X-13.09711 Y49.17631 G01 X-13.23193 Y49.12046 G01 X-13.27171 Y49.10397 G01 X-13.43280 Y49.00527 G01 X-13.57648 Y48.88253 G01 X-13.69922 Y48.73885 G01 X-13.76048 Y48.63885 G01 X-13.79795 Y48.57771 G01 X-13.87026 Y48.40314 G01 X-13.91435 Y48.21942 G01 X-13.92919 Y48.03103 G01 X-13.91435 Y47.84263 G01 X-13.87026 Y47.65892 G01 X-13.79795 Y47.48434 G01 X-13.73950 Y47.38896 G01 X-13.71372 Y47.34688 G01 X-13.70364 Y47.32945 G01 X-13.69401 Y47.31180 G01 X-13.65522 Y47.20934 G01 X-13.63551 Y47.12300 G01 X-13.62546 Y47.03395 G01 X-13.62546 Y45.47208 G01 X-13.62599 Y45.45186 G01 X-13.62700 Y45.43179 G01 X-13.64750 Y45.32410 G01 X-13.67582 Y45.24020 G01 X-13.71372 Y45.15915 G01 X-13.79795 Y45.02171 G01 X-13.87026 Y44.84714 G01 X-13.91435 Y44.66342 G01 X-13.92919 Y44.47503 G01 X-13.91435 Y44.28663 G01 X-13.87026 Y44.10294 G01 X-13.85131 Y44.05722 G01 X-13.79790 Y43.92826 G01 X-13.71375 Y43.79095 G01 X-13.70364 Y43.77345 G01 X-13.69401 Y43.75580 G01 X-13.65522 Y43.65334 G01 X-13.63551 Y43.56700 G01 X-13.62546 Y43.47795 G01 X-13.62546 Y40.08611 G01 X-13.60331 Y39.94615 G01 X-13.55949 Y39.81136 G01 X-13.49515 Y39.68507 G01 X-13.41184 Y39.57039 G01 X-12.54961 Y38.70816 G01 X-12.43493 Y38.62485 G01 X-12.38825 Y38.60105 G01 X-12.30864 Y38.56048 G01 X-12.21672 Y38.53064 G01 X-12.17080 Y38.51253 G01 X-12.12642 Y38.49178 G01 X-12.06623 Y38.45695 G01 X-12.01299 Y38.41222 G01 X-11.95038 Y38.34959 G01 X-11.89457 Y38.27958 G01 X-11.85574 Y38.19894 G01 X-11.82648 Y38.11535 G01 X-11.80651 Y38.02797 G01 X-11.80654 Y38.00692 G01 X-11.80654 Y37.93836 G01 X-11.81647 Y37.85035 G01 X-11.83641 Y37.76305 G01 X-11.87527 Y37.68238 G01 X-11.92239 Y37.60740 G01 X-11.97821 Y37.53737 G01 X-13.41182 Y36.10377 G01 X-13.49523 Y35.98896 G01 X-13.55949 Y35.86280 G01 X-13.60328 Y35.72805 G01 X-13.60478 Y35.71865 G01 X-13.61090 Y35.68010 G01 X-13.62546 Y35.58800 G01 X-13.62546 Y32.77208 G01 X-13.62599 Y32.75186 G01 X-13.62700 Y32.73179 G01 X-13.64750 Y32.62410 G01 X-13.67582 Y32.54020 G01 X-13.71372 Y32.45920 G01 X-13.76188 Y32.38056 G01 X-13.79795 Y32.32171 G01 X-13.87026 Y32.14714 G01 X-13.91435 Y31.96342 G01 X-13.92919 Y31.77503 G01 X-13.91435 Y31.58663 G01 X-13.87026 Y31.40292 G01 X-13.79792 Y31.22832 G01 X-13.75586 Y31.15966 G01 X-13.71377 Y31.09098 G01 X-13.70364 Y31.07345 G01 X-13.69401 Y31.05580 G01 X-13.65522 Y30.95334 G01 X-13.63551 Y30.86700 G01 X-13.62546 Y30.77795 G01 X-13.62546 Y28.96208 G01 X-13.62599 Y28.94186 G01 X-13.62700 Y28.92179 G01 X-13.64750 Y28.81410 G01 X-13.67582 Y28.73020 G01 X-13.71375 Y28.64915 G01 X-13.79792 Y28.51173 G01 X-13.87026 Y28.33714 G01 X-13.91435 Y28.15342 G01 X-13.92919 Y27.96503 G01 X-13.91435 Y27.77663 G01 X-13.87026 Y27.59292 G01 X-13.79795 Y27.41832 G01 X-13.69922 Y27.25723 G01 X-13.57648 Y27.11352 G01 X-13.43277 Y26.99078 G01 X-13.27168 Y26.89205 G01 X-13.09708 Y26.81974 G01 X-12.91337 Y26.77564 G01 X-12.72497 Y26.76081 G01 X-12.53658 Y26.77564 G01 X-12.35286 Y26.81974 G01 X-12.17827 Y26.89208 G01 X-11.99744 Y27.00287 G01 X-11.93943 Y27.03221 G01 X-11.87974 Y27.05654 G01 X-11.80567 Y27.07867 G01 X-11.72876 Y27.08616 G01 X-11.64022 Y27.08616 G01 X-11.55119 Y27.07613 G01 X-11.46666 Y27.04654 G01 X-11.43725 Y27.03239 G01 X-11.38685 Y27.00811 G01 X-11.31101 Y26.96046 G01 X-11.24766 Y26.89711 G01 X-11.19244 Y26.82787 G01 X-11.14479 Y26.75205 G01 X-11.11522 Y26.66752 G01 X-11.09551 Y26.58118 G01 X-11.08546 Y26.49213 G01 X-11.08546 Y18.80713 G01 X-11.09112 Y18.74010 G01 X-11.10230 Y18.67437 G01 X-11.12295 Y18.59872 G01 X-11.15797 Y18.52860 G01 X-11.20509 Y18.45361 G01 X-11.26092 Y18.38359 G01 X-13.31151 Y16.33299 G01 X-13.34672 Y16.30173 G01 X-13.38344 Y16.27277 G01 X-13.42203 Y16.24585 G01 X-13.43277 Y16.23927 G01 X-13.48723 Y16.19279 G01 X-13.57646 Y16.11653 G01 X-13.69922 Y15.97285 G01 X-13.79792 Y15.81173 G01 X-13.87026 Y15.63714 G01 X-13.91435 Y15.45342 G01 X-13.92919 Y15.26503 G01 X-13.91435 Y15.07663 G01 X-13.87026 Y14.89292 G01 X-13.79795 Y14.71834 G01 X-13.72835 Y14.60480 G01 X-13.71367 Y14.58083 G01 X-13.70364 Y14.56345 G01 X-13.69401 Y14.54580 G01 X-13.65522 Y14.44334 G01 X-13.63551 Y14.35700 G01 X-13.62546 Y14.26795 G01 X-13.62546 Y12.45208 G01 X-13.62599 Y12.43186 G01 X-13.62700 Y12.41179 G01 X-13.64750 Y12.30410 G01 X-13.67582 Y12.22020 G01 X-13.71375 Y12.13915 G01 X-13.79792 Y12.00173 G01 X-13.87026 Y11.82714 G01 X-13.91435 Y11.64342 G01 X-13.92919 Y11.45503 G01 X-13.91435 Y11.26663 G01 X-13.87026 Y11.08292 G01 X-13.79795 Y10.90832 G01 X-13.69922 Y10.74723 G01 X-13.57648 Y10.60352 G01 X-13.43277 Y10.48078 G01 X-13.27168 Y10.38205 G01 X-13.09708 Y10.30974 G01 X-12.91337 Y10.26564 G01 X-12.72497 Y10.25081 G01 X-12.53658 Y10.26564 G01 X-12.35286 Y10.30974 G01 X-12.17827 Y10.38208 G01 X-12.01715 Y10.48078 G01 X-11.87346 Y10.60352 G01 X-11.75073 Y10.74720 G01 X-11.65205 Y10.90824 G01 X-11.57969 Y11.08292 G01 X-11.53559 Y11.26663 G01 X-11.52076 Y11.45503 G01 X-11.53559 Y11.64342 G01 X-11.57969 Y11.82714 G01 X-11.65203 Y12.00173 G01 X-11.73620 Y12.13915 G01 X-11.74621 Y12.15642 G01 X-11.75584 Y12.17405 G01 X-11.79472 Y12.27672 G01 X-11.81444 Y12.36305 G01 X-11.82449 Y12.45208 G01 X-11.82449 Y14.26795 G01 X-11.82396 Y14.28819 G01 X-11.82294 Y14.30826 G01 X-11.80247 Y14.41593 G01 X-11.77415 Y14.49985 G01 X-11.73620 Y14.58095 G01 X-11.65200 Y14.71832 G01 X-11.57969 Y14.89292 G01 X-11.53559 Y15.07663 G01 X-11.52076 Y15.26508 G01 X-11.52183 Y15.27887 G01 X-11.51974 Y15.36152 G01 X-11.50920 Y15.44285 G01 X-11.48896 Y15.52670 G01 X-11.45119 Y15.60424 G01 X-11.40407 Y15.67922 G01 X-11.34824 Y15.74925 G01 X-9.49811 Y17.59939 G01 X-9.41480 Y17.71407 G01 X-9.38261 Y17.77721 G01 X-9.35046 Y17.84036 G01 X-9.30664 Y17.97515 G01 X-9.28449 Y18.11513 G01 X-9.28449 Y31.96489 G01 X-9.28383 Y31.98765 G01 X-9.28256 Y32.00995 G01 X-9.26080 Y32.11925 G01 X-9.23156 Y32.20284 G01 X-9.19267 Y32.28361 G01 X-9.13677 Y32.35369 G01 X-9.07413 Y32.41630 G01 X-9.00413 Y32.47210 G01 X-8.92348 Y32.51094 G01 X-8.83989 Y32.54020 G01 X-8.75252 Y32.56016 G01 X-8.66291 Y32.56014 G01 X-8.57489 Y32.55021 G01 X-8.48759 Y32.53027 G01 X-8.40692 Y32.49141 G01 X-8.33194 Y32.44429 G01 X-8.26192 Y32.38846 G01 X-8.06161 Y32.18816 G01 X-7.94693 Y32.10484 G01 X-7.88379 Y32.07266 G01 X-7.82064 Y32.04051 G01 X-7.76082 Y32.02105 G01 X-7.68587 Y31.99672 G01 X-7.54584 Y31.97454 G01 X-5.54605 Y31.97454 G01 X-5.47896 Y31.96888 G01 X-5.41325 Y31.95770 G01 X-5.33766 Y31.93705 G01 X-5.26756 Y31.90208 G01 X-5.19255 Y31.85496 G01 X-5.12248 Y31.79908 G01 X-4.98575 Y31.66235 G01 X-4.80249 Y31.52514 G01 X-4.60155 Y31.41544 G01 X-4.38702 Y31.33543 G01 X-4.16335 Y31.28676 G01 X-3.93500 Y31.27045 G01 X-3.70650 Y31.28679 G01 X-3.48293 Y31.33543 G01 X-3.26840 Y31.41544 G01 X-3.15375 Y31.47802 G01 X-3.06754 Y31.52511 G01 X-3.06121 Y31.52986 G01 X-2.88420 Y31.66238 G01 X-2.72230 Y31.82425 G01 X-2.58509 Y32.00751 G01 X-2.47539 Y32.20845 G01 X-2.39538 Y32.42298 G01 X-2.34671 Y32.64668 G01 X-2.33038 Y32.87502 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-2.33691 Y36.33580 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-2.33691 Y36.33580 G01 X-2.35997 Y36.10169 G01 X-2.37526 Y36.02480 G01 X-2.44356 Y35.79968 G01 X-2.47356 Y35.72724 G01 X-2.58446 Y35.51977 G01 X-2.62802 Y35.45457 G01 X-2.77724 Y35.27273 G01 X-2.83269 Y35.21728 G01 X-3.01455 Y35.06803 G01 X-3.07976 Y35.02447 G01 X-3.28720 Y34.91358 G01 X-3.35966 Y34.88358 G01 X-3.58476 Y34.81530 G01 X-3.66167 Y34.79999 G01 X-3.89578 Y34.77695 G01 X-3.97419 Y34.77695 G01 X-4.20830 Y34.79999 G01 X-4.28522 Y34.81530 G01 X-4.51031 Y34.88358 G01 X-4.58278 Y34.91358 G01 X-4.79022 Y35.02447 G01 X-4.85542 Y35.06803 G01 X-5.03728 Y35.21728 G01 X-5.09273 Y35.27273 G01 X-5.24196 Y35.45457 G01 X-5.25562 Y35.47502 G01 X-7.29199 Y35.47502 G01 X-7.33118 Y35.47695 G01 X-7.42872 Y35.48655 G01 X-7.50563 Y35.50187 G01 X-7.59943 Y35.53031 G01 X-7.67187 Y35.56031 G01 X-7.75831 Y35.60651 G01 X-7.82351 Y35.65007 G01 X-7.89928 Y35.71225 G01 X-7.92836 Y35.73862 G01 X-8.14477 Y35.95500 G01 X-9.31995 Y35.95500 G01 X-9.33019 Y35.94477 G01 X-9.33936 Y35.93722 G01 X-9.45899 Y35.83905 G01 X-9.52419 Y35.79549 G01 X-9.67116 Y35.71695 G01 X-9.74360 Y35.68693 G01 X-9.90303 Y35.63857 G01 X-9.97995 Y35.62328 G01 X-10.14578 Y35.60695 G01 X-10.22419 Y35.60695 G01 X-10.39003 Y35.62328 G01 X-10.46694 Y35.63857 G01 X-10.62638 Y35.68693 G01 X-10.69882 Y35.71695 G01 X-10.84578 Y35.79549 G01 X-10.91098 Y35.83905 G01 X-11.03140 Y35.93788 G01 X-11.82498 Y35.14431 G01 X-11.82498 Y32.56385 G01 X-11.75061 Y32.47322 G01 X-11.70704 Y32.40802 G01 X-11.63310 Y32.26972 G01 X-11.60311 Y32.19727 G01 X-11.55759 Y32.04719 G01 X-11.54227 Y31.97030 G01 X-11.52691 Y31.81422 G01 X-11.52691 Y31.73581 G01 X-11.54227 Y31.57972 G01 X-11.55759 Y31.50284 G01 X-11.60311 Y31.35275 G01 X-11.63310 Y31.28031 G01 X-11.70704 Y31.14201 G01 X-11.75061 Y31.07680 G01 X-11.82498 Y30.98618 G01 X-11.82498 Y28.75385 G01 X-11.75061 Y28.66322 G01 X-11.70704 Y28.59802 G01 X-11.63310 Y28.45972 G01 X-11.60311 Y28.38727 G01 X-11.55759 Y28.23719 G01 X-11.54227 Y28.16030 G01 X-11.52691 Y28.00422 G01 X-11.52691 Y27.92581 G01 X-11.54227 Y27.76972 G01 X-11.55759 Y27.69284 G01 X-11.60311 Y27.54275 G01 X-11.63310 Y27.47031 G01 X-11.65800 Y27.42378 G01 X-11.70704 Y27.33201 G01 X-11.75061 Y27.26680 G01 X-11.85010 Y27.14557 G01 X-11.90555 Y27.09012 G01 X-12.02678 Y26.99063 G01 X-12.09198 Y26.94707 G01 X-12.23028 Y26.87313 G01 X-12.30273 Y26.84313 G01 X-12.45281 Y26.79762 G01 X-12.52970 Y26.78230 G01 X-12.68578 Y26.76693 G01 X-12.76419 Y26.76693 G01 X-12.92028 Y26.78230 G01 X-12.99716 Y26.79762 G01 X-13.14725 Y26.84313 G01 X-13.21969 Y26.87313 G01 X-13.35799 Y26.94707 G01 X-13.42320 Y26.99063 G01 X-13.54443 Y27.09012 G01 X-13.59988 Y27.14557 G01 X-13.69937 Y27.26680 G01 X-13.74293 Y27.33201 G01 X-13.81687 Y27.47031 G01 X-13.84687 Y27.54275 G01 X-13.89238 Y27.69284 G01 X-13.90770 Y27.76972 G01 X-13.92307 Y27.92581 G01 X-13.92307 Y28.00422 G01 X-13.90770 Y28.16030 G01 X-13.89238 Y28.23719 G01 X-13.84687 Y28.38727 G01 X-13.81687 Y28.45972 G01 X-13.74293 Y28.59802 G01 X-13.69937 Y28.66322 G01 X-13.62500 Y28.75385 G01 X-13.62500 Y30.98618 G01 X-13.69937 Y31.07680 G01 X-13.74293 Y31.14201 G01 X-13.81687 Y31.28031 G01 X-13.84687 Y31.35275 G01 X-13.89238 Y31.50284 G01 X-13.90770 Y31.57972 G01 X-13.92307 Y31.73581 G01 X-13.92307 Y31.81422 G01 X-13.90770 Y31.97030 G01 X-13.89238 Y32.04719 G01 X-13.84687 Y32.19727 G01 X-13.81687 Y32.26972 G01 X-13.74293 Y32.40802 G01 X-13.69937 Y32.47322 G01 X-13.62500 Y32.56385 G01 X-13.62500 Y35.51711 G01 X-13.62307 Y35.55632 G01 X-13.61344 Y35.65388 G01 X-13.59815 Y35.73077 G01 X-13.56970 Y35.82457 G01 X-13.53971 Y35.89701 G01 X-13.49348 Y35.98348 G01 X-13.44992 Y36.04868 G01 X-13.38774 Y36.12445 G01 X-13.36137 Y36.15353 G01 X-12.02345 Y37.49142 G01 X-11.99437 Y37.51779 G01 X-11.91860 Y37.57997 G01 X-11.85340 Y37.62353 G01 X-11.76696 Y37.66973 G01 X-11.69452 Y37.69973 G01 X-11.60072 Y37.72818 G01 X-11.52381 Y37.74349 G01 X-11.42627 Y37.75309 G01 X-11.38708 Y37.75502 G01 X-11.05002 Y37.75502 G01 X-11.03979 Y37.76526 G01 X-10.91098 Y37.87097 G01 X-10.84578 Y37.91454 G01 X-10.69882 Y37.99307 G01 X-10.62638 Y38.02310 G01 X-10.46694 Y38.07146 G01 X-10.39003 Y38.08675 G01 X-10.22419 Y38.10308 G01 X-10.14578 Y38.10308 G01 X-9.97995 Y38.08675 G01 X-9.90303 Y38.07146 G01 X-9.74360 Y38.02310 G01 X-9.67116 Y37.99307 G01 X-9.52419 Y37.91454 G01 X-9.45899 Y37.87097 G01 X-9.33019 Y37.76526 G01 X-9.31995 Y37.75502 G01 X-7.77200 Y37.75502 G01 X-7.73278 Y37.75309 G01 X-7.63525 Y37.74349 G01 X-7.55834 Y37.72818 G01 X-7.46453 Y37.69973 G01 X-7.39209 Y37.66973 G01 X-7.30566 Y37.62353 G01 X-7.24045 Y37.57997 G01 X-7.16469 Y37.51779 G01 X-7.13560 Y37.49142 G01 X-6.91920 Y37.27504 G01 X-5.25560 Y37.27504 G01 X-5.24196 Y37.29546 G01 X-5.09273 Y37.47730 G01 X-5.03728 Y37.53275 G01 X-4.85542 Y37.68197 G01 X-4.79022 Y37.72553 G01 X-4.58278 Y37.83643 G01 X-4.51031 Y37.86645 G01 X-4.31719 Y37.92503 G01 X-4.28522 Y37.93473 G01 X-4.20830 Y37.95002 G01 X-3.97419 Y37.97308 G01 X-3.89578 Y37.97308 G01 X-3.66167 Y37.95002 G01 X-3.58476 Y37.93473 G01 X-3.35966 Y37.86645 G01 X-3.28720 Y37.83643 G01 X-3.07976 Y37.72553 G01 X-3.01455 Y37.68197 G01 X-2.83269 Y37.53275 G01 X-2.77724 Y37.47730 G01 X-2.62802 Y37.29546 G01 X-2.58446 Y37.23026 G01 X-2.47356 Y37.02279 G01 X-2.44356 Y36.95035 G01 X-2.37526 Y36.72523 G01 X-2.35997 Y36.64832 G01 X-2.33691 Y36.41421 G01 X-2.33691 Y36.33580 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-2.33691 Y39.83582 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-2.33691 Y39.83582 G01 X-2.35997 Y39.60171 G01 X-2.37526 Y39.52479 G01 X-2.44356 Y39.29967 G01 X-2.47356 Y39.22723 G01 X-2.58446 Y39.01977 G01 X-2.62802 Y38.95456 G01 X-2.77724 Y38.77273 G01 X-2.83269 Y38.71728 G01 X-3.01455 Y38.56805 G01 X-3.07976 Y38.52449 G01 X-3.28720 Y38.41359 G01 X-3.35966 Y38.38357 G01 X-3.58476 Y38.31530 G01 X-3.66167 Y38.30001 G01 X-3.89578 Y38.27694 G01 X-3.97419 Y38.27694 G01 X-4.20830 Y38.30001 G01 X-4.28522 Y38.31530 G01 X-4.51031 Y38.38357 G01 X-4.58278 Y38.41359 G01 X-4.79022 Y38.52449 G01 X-4.85542 Y38.56805 G01 X-5.03728 Y38.71728 G01 X-5.09273 Y38.77273 G01 X-5.24196 Y38.95456 G01 X-5.25562 Y38.97501 G01 X-6.66519 Y38.97501 G01 X-6.88160 Y38.75863 G01 X-6.91069 Y38.73226 G01 X-6.98645 Y38.67008 G01 X-7.05166 Y38.62650 G01 X-7.13809 Y38.58029 G01 X-7.21053 Y38.55030 G01 X-7.30434 Y38.52185 G01 X-7.38125 Y38.50656 G01 X-7.47878 Y38.49693 G01 X-7.51800 Y38.49500 G01 X-9.31995 Y38.49500 G01 X-9.33019 Y38.48477 G01 X-9.45899 Y38.37905 G01 X-9.52419 Y38.33549 G01 X-9.67116 Y38.25695 G01 X-9.74360 Y38.22693 G01 X-9.90303 Y38.17857 G01 X-9.97995 Y38.16328 G01 X-10.14578 Y38.14695 G01 X-10.22419 Y38.14695 G01 X-10.39003 Y38.16328 G01 X-10.46694 Y38.17857 G01 X-10.62638 Y38.22693 G01 X-10.69882 Y38.25695 G01 X-10.84578 Y38.33549 G01 X-10.91098 Y38.37905 G01 X-11.03979 Y38.48477 G01 X-11.05002 Y38.49500 G01 X-11.96300 Y38.49500 G01 X-12.00219 Y38.49693 G01 X-12.09973 Y38.50656 G01 X-12.17664 Y38.52185 G01 X-12.27044 Y38.55030 G01 X-12.34288 Y38.58029 G01 X-12.42932 Y38.62650 G01 X-12.49452 Y38.67008 G01 X-12.57029 Y38.73226 G01 X-12.59937 Y38.75863 G01 X-13.36137 Y39.52063 G01 X-13.38774 Y39.54971 G01 X-13.44992 Y39.62548 G01 X-13.49350 Y39.69068 G01 X-13.53971 Y39.77712 G01 X-13.56970 Y39.84956 G01 X-13.59815 Y39.94336 G01 X-13.61344 Y40.02027 G01 X-13.62307 Y40.11781 G01 X-13.62500 Y40.15700 G01 X-13.62500 Y43.68618 G01 X-13.69937 Y43.77680 G01 X-13.74293 Y43.84201 G01 X-13.81687 Y43.98031 G01 X-13.84687 Y44.05275 G01 X-13.89238 Y44.20284 G01 X-13.90770 Y44.27972 G01 X-13.92307 Y44.43581 G01 X-13.92307 Y44.51422 G01 X-13.90770 Y44.67030 G01 X-13.89238 Y44.74719 G01 X-13.84687 Y44.89727 G01 X-13.81687 Y44.96972 G01 X-13.74293 Y45.10802 G01 X-13.69937 Y45.17322 G01 X-13.62500 Y45.26385 G01 X-13.62500 Y47.24218 G01 X-13.69937 Y47.33280 G01 X-13.74293 Y47.39801 G01 X-13.81687 Y47.53631 G01 X-13.84687 Y47.60875 G01 X-13.89238 Y47.75884 G01 X-13.90770 Y47.83572 G01 X-13.92307 Y47.99181 G01 X-13.92307 Y48.07022 G01 X-13.90770 Y48.22630 G01 X-13.89238 Y48.30319 G01 X-13.84687 Y48.45327 G01 X-13.81687 Y48.52572 G01 X-13.74293 Y48.66402 G01 X-13.69937 Y48.72922 G01 X-13.59988 Y48.85045 G01 X-13.54443 Y48.90590 G01 X-13.42320 Y49.00539 G01 X-13.35799 Y49.04896 G01 X-13.21969 Y49.12290 G01 X-13.14725 Y49.15289 G01 X-12.99716 Y49.19841 G01 X-12.92028 Y49.21373 G01 X-12.76419 Y49.22909 G01 X-12.68578 Y49.22909 G01 X-12.52970 Y49.21373 G01 X-12.45281 Y49.19841 G01 X-12.30273 Y49.15289 G01 X-12.23028 Y49.12290 G01 X-12.09198 Y49.04896 G01 X-12.02678 Y49.00539 G01 X-11.90555 Y48.90590 G01 X-11.85010 Y48.85045 G01 X-11.75061 Y48.72922 G01 X-11.70704 Y48.66402 G01 X-11.63310 Y48.52572 G01 X-11.60311 Y48.45327 G01 X-11.55759 Y48.30319 G01 X-11.54227 Y48.22630 G01 X-11.52691 Y48.07022 G01 X-11.52691 Y47.99181 G01 X-11.54227 Y47.83572 G01 X-11.55759 Y47.75884 G01 X-11.60311 Y47.60875 G01 X-11.63310 Y47.53631 G01 X-11.70704 Y47.39801 G01 X-11.75061 Y47.33280 G01 X-11.82498 Y47.24218 G01 X-11.82498 Y45.26385 G01 X-11.75061 Y45.17322 G01 X-11.70704 Y45.10802 G01 X-11.63310 Y44.96972 G01 X-11.60311 Y44.89727 G01 X-11.55759 Y44.74719 G01 X-11.54227 Y44.67030 G01 X-11.52691 Y44.51422 G01 X-11.52691 Y44.43581 G01 X-11.54227 Y44.27972 G01 X-11.55759 Y44.20284 G01 X-11.60311 Y44.05275 G01 X-11.63310 Y43.98031 G01 X-11.70704 Y43.84201 G01 X-11.75061 Y43.77680 G01 X-11.82498 Y43.68618 G01 X-11.82498 Y40.52980 G01 X-11.59020 Y40.29502 G01 X-11.05002 Y40.29502 G01 X-11.03979 Y40.30526 G01 X-10.91098 Y40.41097 G01 X-10.84578 Y40.45454 G01 X-10.69882 Y40.53307 G01 X-10.62638 Y40.56310 G01 X-10.46694 Y40.61146 G01 X-10.39003 Y40.62675 G01 X-10.22419 Y40.64308 G01 X-10.14578 Y40.64308 G01 X-9.97995 Y40.62675 G01 X-9.90303 Y40.61146 G01 X-9.74360 Y40.56310 G01 X-9.67116 Y40.53307 G01 X-9.52419 Y40.45454 G01 X-9.45899 Y40.41097 G01 X-9.33019 Y40.30526 G01 X-9.31995 Y40.29502 G01 X-7.89077 Y40.29502 G01 X-7.67436 Y40.51141 G01 X-7.64528 Y40.53777 G01 X-7.56951 Y40.59995 G01 X-7.50431 Y40.64354 G01 X-7.41787 Y40.68974 G01 X-7.34543 Y40.71974 G01 X-7.25163 Y40.74818 G01 X-7.17472 Y40.76348 G01 X-7.07718 Y40.77310 G01 X-7.03799 Y40.77503 G01 X-5.25560 Y40.77503 G01 X-5.24196 Y40.79545 G01 X-5.09273 Y40.97729 G01 X-5.03728 Y41.03274 G01 X-4.85542 Y41.18199 G01 X-4.79022 Y41.22555 G01 X-4.58278 Y41.33645 G01 X-4.51031 Y41.36645 G01 X-4.28522 Y41.43472 G01 X-4.20830 Y41.45004 G01 X-3.97419 Y41.47308 G01 X-3.89578 Y41.47308 G01 X-3.66167 Y41.45004 G01 X-3.58476 Y41.43472 G01 X-3.35966 Y41.36645 G01 X-3.28720 Y41.33645 G01 X-3.18895 Y41.28392 G01 X-3.07976 Y41.22555 G01 X-3.01455 Y41.18199 G01 X-2.83269 Y41.03274 G01 X-2.77724 Y40.97729 G01 X-2.62802 Y40.79545 G01 X-2.58446 Y40.73025 G01 X-2.47356 Y40.52279 G01 X-2.44356 Y40.45034 G01 X-2.37526 Y40.22522 G01 X-2.35997 Y40.14834 G01 X-2.33691 Y39.91423 G01 X-2.33691 Y39.83582 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-2.33498 Y42.17500 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-2.33498 Y42.17500 G01 X-2.34267 Y42.09698 G01 X-2.36292 Y42.03028 G01 X-2.36655 Y42.01984 G01 X-2.39670 Y41.96347 G01 X-2.40668 Y41.94757 G01 X-2.44562 Y41.90013 G01 X-2.46010 Y41.88565 G01 X-2.50620 Y41.84780 G01 X-2.52898 Y41.83376 G01 X-2.58192 Y41.80546 G01 X-2.65695 Y41.78270 G01 X-2.73498 Y41.77501 G01 X-5.13500 Y41.77501 G01 X-5.21303 Y41.78270 G01 X-5.28806 Y41.80546 G01 X-5.35722 Y41.84242 G01 X-5.41783 Y41.89218 G01 X-5.46759 Y41.95278 G01 X-5.50454 Y42.02194 G01 X-5.52730 Y42.09698 G01 X-5.53500 Y42.17500 G01 X-5.53500 Y42.47500 G01 X-6.72120 Y42.47500 G01 X-7.89760 Y41.29863 G01 X-7.92669 Y41.27226 G01 X-8.00245 Y41.21008 G01 X-8.06766 Y41.16650 G01 X-8.15409 Y41.12029 G01 X-8.22653 Y41.09030 G01 X-8.32034 Y41.06185 G01 X-8.39725 Y41.04656 G01 X-8.49478 Y41.03693 G01 X-8.53400 Y41.03500 G01 X-9.31995 Y41.03500 G01 X-9.33019 Y41.02477 G01 X-9.45899 Y40.91905 G01 X-9.52419 Y40.87549 G01 X-9.67116 Y40.79695 G01 X-9.74360 Y40.76693 G01 X-9.90303 Y40.71857 G01 X-9.97995 Y40.70328 G01 X-10.14578 Y40.68695 G01 X-10.22419 Y40.68695 G01 X-10.39003 Y40.70328 G01 X-10.46694 Y40.71857 G01 X-10.62638 Y40.76693 G01 X-10.69882 Y40.79695 G01 X-10.84578 Y40.87549 G01 X-10.91098 Y40.91905 G01 X-11.03979 Y41.02477 G01 X-11.09523 Y41.08021 G01 X-11.20095 Y41.20902 G01 X-11.24451 Y41.27422 G01 X-11.32305 Y41.42118 G01 X-11.35307 Y41.49362 G01 X-11.40143 Y41.65306 G01 X-11.41672 Y41.72997 G01 X-11.42543 Y41.81831 G01 X-11.43305 Y41.89581 G01 X-11.43305 Y41.97422 G01 X-11.41672 Y42.14005 G01 X-11.40143 Y42.21697 G01 X-11.35307 Y42.37640 G01 X-11.32305 Y42.44884 G01 X-11.24451 Y42.59581 G01 X-11.20095 Y42.66101 G01 X-11.09523 Y42.78981 G01 X-11.08500 Y42.80005 G01 X-11.08500 Y58.43225 G01 X-12.44357 Y59.79082 G01 X-12.56026 Y59.80230 G01 X-12.63717 Y59.81762 G01 X-12.78726 Y59.86313 G01 X-12.85970 Y59.89313 G01 X-12.99800 Y59.96707 G01 X-13.06320 Y60.01063 G01 X-13.18444 Y60.11012 G01 X-13.23988 Y60.16557 G01 X-13.33938 Y60.28680 G01 X-13.38294 Y60.35201 G01 X-13.45685 Y60.49031 G01 X-13.48687 Y60.56275 G01 X-13.53239 Y60.71284 G01 X-13.54768 Y60.78972 G01 X-13.56307 Y60.94581 G01 X-13.56307 Y61.02422 G01 X-13.54768 Y61.18030 G01 X-13.53239 Y61.25719 G01 X-13.48687 Y61.40727 G01 X-13.45685 Y61.47972 G01 X-13.38294 Y61.61802 G01 X-13.33938 Y61.68322 G01 X-13.26498 Y61.77387 G01 X-13.26498 Y64.00615 G01 X-13.33938 Y64.09680 G01 X-13.38294 Y64.16201 G01 X-13.45685 Y64.30031 G01 X-13.48687 Y64.37275 G01 X-13.53239 Y64.52284 G01 X-13.54768 Y64.59972 G01 X-13.56307 Y64.75581 G01 X-13.56307 Y64.83422 G01 X-13.54768 Y64.99030 G01 X-13.53239 Y65.06719 G01 X-13.48687 Y65.21727 G01 X-13.45685 Y65.28972 G01 X-13.38294 Y65.42802 G01 X-13.33938 Y65.49322 G01 X-13.23988 Y65.61445 G01 X-13.18444 Y65.66990 G01 X-13.06320 Y65.76939 G01 X-12.99800 Y65.81296 G01 X-12.85970 Y65.88690 G01 X-12.78726 Y65.91689 G01 X-12.63717 Y65.96241 G01 X-12.56026 Y65.97773 G01 X-12.40420 Y65.99309 G01 X-12.32579 Y65.99309 G01 X-12.16971 Y65.97773 G01 X-12.09279 Y65.96241 G01 X-11.94273 Y65.91689 G01 X-11.87029 Y65.88690 G01 X-11.73196 Y65.81296 G01 X-11.66679 Y65.76939 G01 X-11.54555 Y65.66990 G01 X-11.49010 Y65.61445 G01 X-11.39061 Y65.49322 G01 X-11.34705 Y65.42802 G01 X-11.27311 Y65.28972 G01 X-11.24311 Y65.21727 G01 X-11.19757 Y65.06719 G01 X-11.18228 Y64.99030 G01 X-11.16691 Y64.83422 G01 X-11.16691 Y64.75581 G01 X-11.18228 Y64.59972 G01 X-11.19757 Y64.52284 G01 X-11.24311 Y64.37275 G01 X-11.27311 Y64.30031 G01 X-11.34705 Y64.16201 G01 X-11.39061 Y64.09680 G01 X-11.46496 Y64.00620 G01 X-11.46496 Y61.77382 G01 X-11.39061 Y61.68322 G01 X-11.34705 Y61.61802 G01 X-11.27311 Y61.47972 G01 X-11.24311 Y61.40727 G01 X-11.19757 Y61.25719 G01 X-11.18228 Y61.18030 G01 X-11.17080 Y61.06364 G01 X-9.54860 Y59.44142 G01 X-9.52224 Y59.41233 G01 X-9.46006 Y59.33657 G01 X-9.41647 Y59.27136 G01 X-9.37027 Y59.18493 G01 X-9.34027 Y59.11249 G01 X-9.31182 Y59.01868 G01 X-9.29653 Y58.94177 G01 X-9.28691 Y58.84424 G01 X-9.28498 Y58.80502 G01 X-9.28498 Y42.83502 G01 X-8.90677 Y42.83502 G01 X-7.73037 Y44.01140 G01 X-7.70129 Y44.03776 G01 X-7.62552 Y44.09994 G01 X-7.56032 Y44.14353 G01 X-7.47388 Y44.18973 G01 X-7.40144 Y44.21973 G01 X-7.30764 Y44.24818 G01 X-7.23073 Y44.26347 G01 X-7.13319 Y44.27310 G01 X-7.09400 Y44.27503 G01 X-5.53500 Y44.27503 G01 X-5.53500 Y44.57503 G01 X-5.52730 Y44.65305 G01 X-5.50574 Y44.72415 G01 X-5.50388 Y44.72933 G01 X-5.47333 Y44.78648 G01 X-5.46327 Y44.80248 G01 X-5.42433 Y44.84993 G01 X-5.40990 Y44.86436 G01 X-5.36240 Y44.90335 G01 X-5.34658 Y44.91330 G01 X-5.29014 Y44.94345 G01 X-5.27978 Y44.94708 G01 X-5.21303 Y44.96733 G01 X-5.13500 Y44.97502 G01 X-2.73498 Y44.97502 G01 X-2.65695 Y44.96733 G01 X-2.59012 Y44.94706 G01 X-2.57983 Y44.94345 G01 X-2.52322 Y44.91320 G01 X-2.50765 Y44.90342 G01 X-2.45992 Y44.86423 G01 X-2.44575 Y44.85008 G01 X-2.40661 Y44.80236 G01 X-2.39680 Y44.78676 G01 X-2.36652 Y44.73014 G01 X-2.36297 Y44.71998 G01 X-2.34267 Y44.65305 G01 X-2.33498 Y44.57503 G01 X-2.33498 Y42.17500 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-3.23950 Y72.90961 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-3.23950 Y72.90961 G01 X-3.27094 Y72.63052 G01 X-3.33343 Y72.35671 G01 X-3.42619 Y72.09163 G01 X-3.54803 Y71.83857 G01 X-3.69743 Y71.60080 G01 X-3.87254 Y71.38122 G01 X-4.07117 Y71.18259 G01 X-4.29073 Y71.00751 G01 X-4.52852 Y70.85808 G01 X-4.78156 Y70.73624 G01 X-5.04666 Y70.64348 G01 X-5.32044 Y70.58099 G01 X-5.59956 Y70.54955 G01 X-5.88039 Y70.54955 G01 X-6.15951 Y70.58099 G01 X-6.43329 Y70.64348 G01 X-6.69839 Y70.73624 G01 X-6.95143 Y70.85808 G01 X-7.18922 Y71.00751 G01 X-7.40878 Y71.18259 G01 X-7.60741 Y71.38122 G01 X-7.78249 Y71.60078 G01 X-7.93192 Y71.83857 G01 X-8.05376 Y72.09163 G01 X-8.11566 Y72.26847 G01 X-8.14652 Y72.35668 G01 X-8.20901 Y72.63049 G01 X-8.24045 Y72.90961 G01 X-8.24045 Y73.19044 G01 X-8.20901 Y73.46956 G01 X-8.14652 Y73.74334 G01 X-8.05376 Y74.00844 G01 X-7.93192 Y74.26148 G01 X-7.78249 Y74.49927 G01 X-7.60741 Y74.71883 G01 X-7.40878 Y74.91746 G01 X-7.18920 Y75.09257 G01 X-6.95143 Y75.24197 G01 X-6.69837 Y75.36381 G01 X-6.43329 Y75.45657 G01 X-6.15946 Y75.51908 G01 X-5.91323 Y75.54682 G01 X-5.88044 Y75.55050 G01 X-5.59946 Y75.55050 G01 X-5.57472 Y75.54773 G01 X-5.32047 Y75.51908 G01 X-5.04666 Y75.45657 G01 X-4.78156 Y75.36381 G01 X-4.52852 Y75.24197 G01 X-4.29073 Y75.09257 G01 X-4.07117 Y74.91746 G01 X-3.87254 Y74.71883 G01 X-3.69743 Y74.49927 G01 X-3.54803 Y74.26148 G01 X-3.42619 Y74.00844 G01 X-3.33343 Y73.74334 G01 X-3.27094 Y73.46956 G01 X-3.23950 Y73.19044 G01 X-3.23950 Y72.90961 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-15.88849 Y71.96311 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-15.88849 Y71.96311 G01 X-15.89195 Y71.94119 G01 X-15.91064 Y71.82318 G01 X-15.93414 Y71.75087 G01 X-15.94882 Y71.68978 G01 X-15.95794 Y71.63220 G01 X-15.95687 Y71.63202 G01 X-15.96073 Y71.61355 G01 X-15.97120 Y71.51894 G01 X-16.00086 Y71.43415 G01 X-16.04887 Y71.35772 G01 X-16.11267 Y71.29392 G01 X-16.18910 Y71.24591 G01 X-16.27432 Y71.21609 G01 X-16.35324 Y71.20718 G01 X-16.35547 Y71.20703 G01 X-16.38923 Y71.20296 G01 X-16.44679 Y71.19354 G01 X-16.50582 Y71.17919 G01 X-16.57810 Y71.15569 G01 X-16.71808 Y71.13354 G01 X-18.07721 Y71.13354 G01 X-18.16624 Y71.12349 G01 X-18.25257 Y71.10378 G01 X-18.33710 Y71.07421 G01 X-18.41292 Y71.02656 G01 X-18.48216 Y70.97134 G01 X-18.54551 Y70.90799 G01 X-18.59316 Y70.83215 G01 X-18.63159 Y70.75234 G01 X-18.66118 Y70.66781 G01 X-18.67122 Y70.57878 G01 X-18.67122 Y70.49024 G01 X-18.66118 Y70.40124 G01 X-18.63159 Y70.31671 G01 X-18.59316 Y70.23690 G01 X-18.53111 Y70.14399 G01 X-18.51625 Y70.12735 G01 X-18.50076 Y70.11097 G01 X-18.49639 Y70.10660 G01 X-18.42613 Y70.01506 G01 X-18.40828 Y69.99176 G01 X-18.40378 Y69.98592 G01 X-18.36469 Y69.93494 G01 X-18.25651 Y69.74757 G01 X-18.17371 Y69.54767 G01 X-18.11770 Y69.33873 G01 X-18.08948 Y69.12423 G01 X-18.08948 Y18.30185 G01 X-18.11772 Y18.08735 G01 X-18.17371 Y17.87833 G01 X-18.21884 Y17.76934 G01 X-18.25649 Y17.67848 G01 X-18.36469 Y17.49108 G01 X-18.39283 Y17.45438 G01 X-18.49641 Y17.31943 G01 X-18.66756 Y17.14826 G01 X-18.67292 Y17.14292 G01 X-21.61896 Y14.19688 G01 X-21.79437 Y14.02144 G01 X-21.96600 Y13.88977 G01 X-22.15343 Y13.78156 G01 X-22.35323 Y13.69879 G01 X-22.35650 Y13.69790 G01 X-22.43933 Y13.66533 G01 X-22.51764 Y13.62396 G01 X-22.59168 Y13.57349 G01 X-22.65264 Y13.50775 G01 X-22.70522 Y13.43648 G01 X-22.74997 Y13.35893 G01 X-22.77200 Y13.28751 G01 X-22.77636 Y13.27336 G01 X-22.79282 Y13.18634 G01 X-22.79953 Y13.09706 G01 X-22.78617 Y13.00854 G01 X-22.76326 Y12.92299 G01 X-22.73054 Y12.83955 G01 X-22.68005 Y12.76551 G01 X-22.62229 Y12.69841 G01 X-22.57286 Y12.65015 G01 X-22.51589 Y12.61108 G01 X-22.47385 Y12.58733 G01 X-22.43016 Y12.56605 G01 X-22.33827 Y12.52797 G01 X-22.17715 Y12.42927 G01 X-22.03347 Y12.30653 G01 X-21.91073 Y12.16285 G01 X-21.81203 Y12.00173 G01 X-21.73969 Y11.82714 G01 X-21.69559 Y11.64342 G01 X-21.68076 Y11.45503 G01 X-21.69559 Y11.26663 G01 X-21.73969 Y11.08292 G01 X-21.81205 Y10.90824 G01 X-21.91073 Y10.74720 G01 X-22.03347 Y10.60352 G01 X-22.17715 Y10.48078 G01 X-22.33827 Y10.38208 G01 X-22.51286 Y10.30974 G01 X-22.69658 Y10.26564 G01 X-22.88497 Y10.25081 G01 X-23.07337 Y10.26564 G01 X-23.25708 Y10.30974 G01 X-23.43168 Y10.38208 G01 X-23.56910 Y10.46625 G01 X-23.65015 Y10.50418 G01 X-23.73405 Y10.53250 G01 X-23.84174 Y10.55300 G01 X-23.86181 Y10.55401 G01 X-23.88205 Y10.55454 G01 X-25.69322 Y10.55454 G01 X-25.78225 Y10.54449 G01 X-25.86859 Y10.52478 G01 X-25.95312 Y10.49521 G01 X-26.02894 Y10.44756 G01 X-26.09818 Y10.39234 G01 X-26.16152 Y10.32899 G01 X-26.20917 Y10.25315 G01 X-26.24760 Y10.17334 G01 X-26.27720 Y10.08881 G01 X-26.28723 Y9.99978 G01 X-26.28723 Y9.91124 G01 X-26.28024 Y9.83689 G01 X-26.25957 Y9.76514 G01 X-26.23790 Y9.70992 G01 X-26.21194 Y9.65602 G01 X-26.20651 Y9.64660 G01 X-26.12373 Y9.44670 G01 X-26.06772 Y9.23771 G01 X-26.03948 Y9.02320 G01 X-26.03948 Y7.36651 G01 X-26.02944 Y7.27761 G01 X-26.00976 Y7.19128 G01 X-25.98019 Y7.10667 G01 X-25.93252 Y7.03080 G01 X-25.87730 Y6.96156 G01 X-25.81395 Y6.89821 G01 X-25.73811 Y6.85056 G01 X-25.65830 Y6.81213 G01 X-25.59556 Y6.78818 G01 X-25.52967 Y6.77505 G01 X-25.48540 Y6.77005 G01 X-25.44049 Y6.76751 G01 X-22.43306 Y6.76751 G01 X-22.40314 Y6.76278 G01 X-22.29313 Y6.74536 G01 X-22.22082 Y6.72186 G01 X-22.15973 Y6.70718 G01 X-22.10215 Y6.69806 G01 X-22.10197 Y6.69913 G01 X-22.08350 Y6.69527 G01 X-21.98889 Y6.68480 G01 X-21.90410 Y6.65514 G01 X-21.82767 Y6.60713 G01 X-21.76387 Y6.54333 G01 X-21.71586 Y6.46690 G01 X-21.68604 Y6.38168 G01 X-21.67713 Y6.30276 G01 X-21.67698 Y6.30053 G01 X-21.67291 Y6.26677 G01 X-21.66349 Y6.20921 G01 X-21.64914 Y6.15018 G01 X-21.62564 Y6.07790 G01 X-21.60349 Y5.93792 G01 X-21.60349 Y5.79613 G01 X-21.62564 Y5.65615 G01 X-21.64914 Y5.58387 G01 X-21.66382 Y5.52278 G01 X-21.67294 Y5.46522 G01 X-21.67187 Y5.46502 G01 X-21.67573 Y5.44655 G01 X-21.68620 Y5.35194 G01 X-21.71586 Y5.26718 G01 X-21.76387 Y5.19072 G01 X-21.82767 Y5.12695 G01 X-21.90410 Y5.07891 G01 X-21.98932 Y5.04909 G01 X-22.06824 Y5.04018 G01 X-22.07047 Y5.04003 G01 X-22.10423 Y5.03596 G01 X-22.16179 Y5.02656 G01 X-22.22082 Y5.01219 G01 X-22.29310 Y4.98869 G01 X-22.43308 Y4.96654 G01 X-26.02922 Y4.96654 G01 X-26.11824 Y4.95651 G01 X-26.20458 Y4.93680 G01 X-26.27892 Y4.91196 G01 X-26.34699 Y4.87307 G01 X-26.40138 Y4.83449 G01 X-26.45276 Y4.79108 G01 X-28.01745 Y3.22639 G01 X-28.10803 Y3.15692 G01 X-28.18905 Y3.09474 G01 X-28.37643 Y2.98656 G01 X-28.57633 Y2.90376 G01 X-28.78527 Y2.84775 G01 X-28.99982 Y2.81953 G01 X-30.48331 Y2.81953 G01 X-30.57234 Y2.80947 G01 X-30.65867 Y2.78976 G01 X-30.76311 Y2.74991 G01 X-30.78265 Y2.73912 G01 X-30.80198 Y2.72771 G01 X-30.83507 Y2.70691 G01 X-30.92026 Y2.67709 G01 X-30.98747 Y2.66955 G01 X-33.83248 Y2.66955 G01 X-33.89968 Y2.67709 G01 X-33.98485 Y2.70691 G01 X-34.01807 Y2.72779 G01 X-34.09864 Y2.76655 G01 X-34.18223 Y2.79581 G01 X-34.29206 Y2.81768 G01 X-34.31434 Y2.81890 G01 X-34.33667 Y2.81953 G01 X-36.32617 Y2.81953 G01 X-36.54068 Y2.84775 G01 X-36.74964 Y2.90376 G01 X-36.94954 Y2.98656 G01 X-37.03440 Y3.03556 G01 X-37.13689 Y3.09472 G01 X-37.30857 Y3.22649 G01 X-39.51618 Y5.43408 G01 X-39.58626 Y5.48996 G01 X-39.66127 Y5.53708 G01 X-39.73137 Y5.57208 G01 X-39.80696 Y5.59273 G01 X-39.87267 Y5.60388 G01 X-39.93975 Y5.60955 G01 X-40.28049 Y5.60955 G01 X-40.34768 Y5.61711 G01 X-40.43284 Y5.64688 G01 X-40.50927 Y5.69494 G01 X-40.57308 Y5.75872 G01 X-40.62108 Y5.83515 G01 X-40.65090 Y5.92037 G01 X-40.65847 Y5.98755 G01 X-40.65847 Y8.03250 G01 X-40.65090 Y8.09969 G01 X-40.62108 Y8.18490 G01 X-40.57308 Y8.26133 G01 X-40.50927 Y8.32511 G01 X-40.43284 Y8.37317 G01 X-40.34768 Y8.40296 G01 X-40.28049 Y8.41051 G01 X-39.79375 Y8.41051 G01 X-39.70470 Y8.42056 G01 X-39.61837 Y8.44027 G01 X-39.52037 Y8.47665 G01 X-39.50722 Y8.48361 G01 X-39.49424 Y8.49079 G01 X-39.48954 Y8.49349 G01 X-39.28964 Y8.57629 G01 X-39.08067 Y8.63230 G01 X-38.86617 Y8.66052 G01 X-38.64979 Y8.66052 G01 X-38.43529 Y8.63230 G01 X-38.22632 Y8.57629 G01 X-38.02642 Y8.49349 G01 X-38.02172 Y8.49079 G01 X-37.93963 Y8.45496 G01 X-37.85500 Y8.42884 G01 X-37.75210 Y8.41137 G01 X-37.73724 Y8.41081 G01 X-37.72223 Y8.41051 G01 X-37.23547 Y8.41051 G01 X-37.16826 Y8.40296 G01 X-37.08312 Y8.37317 G01 X-37.00666 Y8.32511 G01 X-36.94288 Y8.26133 G01 X-36.89485 Y8.18490 G01 X-36.86506 Y8.09971 G01 X-36.85749 Y8.03250 G01 X-36.85749 Y7.69179 G01 X-36.84743 Y7.60276 G01 X-36.82772 Y7.51643 G01 X-36.80288 Y7.44208 G01 X-36.76399 Y7.37401 G01 X-36.72541 Y7.31963 G01 X-36.68203 Y7.26824 G01 X-35.70976 Y6.29598 G01 X-35.63979 Y6.24015 G01 X-35.56478 Y6.19301 G01 X-35.49455 Y6.15798 G01 X-35.41883 Y6.13731 G01 X-35.35312 Y6.12616 G01 X-35.28622 Y6.12052 G01 X-34.33667 Y6.12052 G01 X-34.24761 Y6.13058 G01 X-34.16128 Y6.15029 G01 X-34.05683 Y6.19014 G01 X-34.03730 Y6.20093 G01 X-34.01805 Y6.21231 G01 X-33.98485 Y6.23314 G01 X-33.89968 Y6.26296 G01 X-33.83248 Y6.27050 G01 X-30.98747 Y6.27050 G01 X-30.92026 Y6.26296 G01 X-30.83507 Y6.23314 G01 X-30.80198 Y6.21234 G01 X-30.72131 Y6.17350 G01 X-30.63772 Y6.14424 G01 X-30.52789 Y6.12240 G01 X-30.50561 Y6.12115 G01 X-30.48331 Y6.12052 G01 X-30.03975 Y6.12052 G01 X-29.95070 Y6.13058 G01 X-29.86436 Y6.15029 G01 X-29.78999 Y6.17515 G01 X-29.72187 Y6.21407 G01 X-29.66751 Y6.25265 G01 X-29.61623 Y6.29596 G01 X-29.51595 Y6.39621 G01 X-29.46004 Y6.46631 G01 X-29.41293 Y6.54132 G01 X-29.37795 Y6.61142 G01 X-29.35730 Y6.68701 G01 X-29.34612 Y6.75272 G01 X-29.34046 Y6.81978 G01 X-29.34046 Y9.02331 G01 X-29.31224 Y9.23771 G01 X-29.25623 Y9.44667 G01 X-29.17343 Y9.64660 G01 X-29.07071 Y9.82455 G01 X-29.06528 Y9.83395 G01 X-28.93355 Y10.00563 G01 X-28.78232 Y10.15686 G01 X-28.72649 Y10.22688 G01 X-28.67938 Y10.30187 G01 X-28.64051 Y10.38254 G01 X-28.62057 Y10.46984 G01 X-28.61064 Y10.55785 G01 X-28.61052 Y10.64637 G01 X-28.62987 Y10.73278 G01 X-28.65796 Y10.81446 G01 X-28.69510 Y10.89330 G01 X-28.71824 Y10.93107 G01 X-28.78755 Y11.09841 G01 X-28.82982 Y11.27451 G01 X-28.84404 Y11.45503 G01 X-28.82982 Y11.63559 G01 X-28.81481 Y11.69818 G01 X-28.78755 Y11.81159 G01 X-28.71826 Y11.97895 G01 X-28.69515 Y12.01664 G01 X-28.65715 Y12.09787 G01 X-28.62885 Y12.18180 G01 X-28.60993 Y12.26930 G01 X-28.61092 Y12.35881 G01 X-28.62182 Y12.44669 G01 X-28.64237 Y12.53280 G01 X-28.68133 Y12.61225 G01 X-28.72771 Y12.68512 G01 X-28.78232 Y12.75319 G01 X-28.93355 Y12.90443 G01 X-29.06525 Y13.07608 G01 X-29.17343 Y13.26348 G01 X-29.25623 Y13.46338 G01 X-29.31224 Y13.67232 G01 X-29.34046 Y13.88682 G01 X-29.34046 Y14.10320 G01 X-29.31826 Y14.27186 G01 X-29.31224 Y14.31776 G01 X-29.25623 Y14.52667 G01 X-29.17343 Y14.72657 G01 X-29.06525 Y14.91397 G01 X-28.93353 Y15.08563 G01 X-27.68636 Y16.33279 G01 X-27.68174 Y16.33744 G01 X-27.51057 Y16.50861 G01 X-27.35344 Y16.62916 G01 X-27.33889 Y16.64033 G01 X-27.15151 Y16.74849 G01 X-26.95167 Y16.83129 G01 X-26.74265 Y16.88730 G01 X-26.52817 Y16.91552 G01 X-23.81675 Y16.91552 G01 X-23.72770 Y16.92558 G01 X-23.64136 Y16.94529 G01 X-23.56699 Y16.97015 G01 X-23.49887 Y17.00907 G01 X-23.44451 Y17.04765 G01 X-23.39320 Y17.09098 G01 X-21.56593 Y18.91823 G01 X-21.51005 Y18.98831 G01 X-21.46293 Y19.06332 G01 X-21.42795 Y19.13342 G01 X-21.40730 Y19.20901 G01 X-21.39613 Y19.27472 G01 X-21.39046 Y19.34178 G01 X-21.39046 Y21.13601 G01 X-21.40052 Y21.22506 G01 X-21.42023 Y21.31139 G01 X-21.44980 Y21.39592 G01 X-21.49745 Y21.47174 G01 X-21.55267 Y21.54098 G01 X-21.61599 Y21.60431 G01 X-21.69181 Y21.65196 G01 X-21.74223 Y21.67624 G01 X-21.77159 Y21.69039 G01 X-21.85615 Y21.72000 G01 X-21.94520 Y21.73004 G01 X-22.03377 Y21.73004 G01 X-22.12280 Y21.72000 G01 X-22.20735 Y21.69039 G01 X-22.28713 Y21.65196 G01 X-22.37977 Y21.59013 G01 X-22.39643 Y21.57527 G01 X-22.41309 Y21.55953 G01 X-22.46270 Y21.50992 G01 X-22.53910 Y21.46191 G01 X-22.62432 Y21.43209 G01 X-22.70324 Y21.42318 G01 X-22.70547 Y21.42303 G01 X-22.73923 Y21.41896 G01 X-22.79679 Y21.40954 G01 X-22.85582 Y21.39519 G01 X-22.92810 Y21.37169 G01 X-23.06808 Y21.34954 G01 X-26.02922 Y21.34954 G01 X-26.11824 Y21.33949 G01 X-26.20458 Y21.31978 G01 X-26.27892 Y21.29493 G01 X-26.34699 Y21.25605 G01 X-26.40138 Y21.21746 G01 X-26.45276 Y21.17408 G01 X-27.71885 Y19.90799 G01 X-27.89037 Y19.73644 G01 X-28.02098 Y19.63624 G01 X-28.06205 Y19.60472 G01 X-28.24943 Y19.49656 G01 X-28.44933 Y19.41376 G01 X-28.65827 Y19.35775 G01 X-28.87282 Y19.32953 G01 X-30.48331 Y19.32953 G01 X-30.57234 Y19.31947 G01 X-30.65867 Y19.29976 G01 X-30.76311 Y19.25991 G01 X-30.78265 Y19.24912 G01 X-30.80193 Y19.23774 G01 X-30.86921 Y19.19547 G01 X-30.93929 Y19.13959 G01 X-31.00193 Y19.07696 G01 X-31.05778 Y19.00690 G01 X-31.09667 Y18.92616 G01 X-31.12504 Y18.84505 G01 X-31.12590 Y18.84256 G01 X-31.14582 Y18.75529 G01 X-31.14582 Y18.66578 G01 X-31.13591 Y18.57779 G01 X-31.11811 Y18.49669 G01 X-31.08394 Y18.42103 G01 X-31.04574 Y18.35552 G01 X-31.00083 Y18.29316 G01 X-30.97884 Y18.26809 G01 X-30.84780 Y18.07198 G01 X-30.77287 Y17.92004 G01 X-30.77752 Y17.92004 G01 X-30.89316 Y18.13637 G01 X-30.93672 Y18.20157 G01 X-31.11084 Y18.41371 G01 X-31.16629 Y18.46916 G01 X-31.37843 Y18.64328 G01 X-31.44363 Y18.68684 G01 X-31.68567 Y18.81622 G01 X-31.75811 Y18.84622 G01 X-32.02075 Y18.92588 G01 X-32.09766 Y18.94119 G01 X-32.37078 Y18.96809 G01 X-32.44919 Y18.96809 G01 X-32.72232 Y18.94119 G01 X-32.79923 Y18.92588 G01 X-33.06187 Y18.84622 G01 X-33.13431 Y18.81622 G01 X-33.17987 Y18.79184 G01 X-33.37634 Y18.68684 G01 X-33.44154 Y18.64328 G01 X-33.65369 Y18.46916 G01 X-33.70913 Y18.41371 G01 X-33.88325 Y18.20157 G01 X-33.92681 Y18.13637 G01 X-34.04246 Y17.92004 G01 X-34.04708 Y17.92004 G01 X-33.97215 Y18.07198 G01 X-33.84111 Y18.26809 G01 X-33.81912 Y18.29316 G01 X-33.76783 Y18.36685 G01 X-33.72572 Y18.44478 G01 X-33.69222 Y18.52788 G01 X-33.67804 Y18.61638 G01 X-33.67393 Y18.70485 G01 X-33.67982 Y18.79415 G01 X-33.70540 Y18.87993 G01 X-33.74005 Y18.96141 G01 X-33.78028 Y19.03403 G01 X-33.83464 Y19.09679 G01 X-33.88996 Y19.14863 G01 X-33.95076 Y19.19550 G01 X-34.01807 Y19.23776 G01 X-34.09864 Y19.27655 G01 X-34.18223 Y19.30581 G01 X-34.29206 Y19.32765 G01 X-34.31434 Y19.32890 G01 X-34.33667 Y19.32953 G01 X-36.32818 Y19.32953 G01 X-36.54268 Y19.35775 G01 X-36.75162 Y19.41376 G01 X-36.95155 Y19.49656 G01 X-37.03978 Y19.54749 G01 X-37.13892 Y19.60474 G01 X-37.18271 Y19.63832 G01 X-37.31057 Y19.73644 G01 X-37.48185 Y19.90771 G01 X-37.48850 Y19.91439 G01 X-39.51819 Y21.94408 G01 X-39.58822 Y21.99991 G01 X-39.66320 Y22.04703 G01 X-39.73333 Y22.08206 G01 X-39.80897 Y22.10271 G01 X-39.87470 Y22.11388 G01 X-39.94176 Y22.11955 G01 X-40.28248 Y22.11955 G01 X-40.34968 Y22.12709 G01 X-40.43483 Y22.15688 G01 X-40.51128 Y22.20494 G01 X-40.57508 Y22.26872 G01 X-40.62309 Y22.34515 G01 X-40.65291 Y22.43031 G01 X-40.66045 Y22.49752 G01 X-40.66045 Y24.54253 G01 X-40.65291 Y24.60974 G01 X-40.62312 Y24.69488 G01 X-40.57506 Y24.77133 G01 X-40.51128 Y24.83511 G01 X-40.43483 Y24.88317 G01 X-40.34968 Y24.91296 G01 X-40.28248 Y24.92051 G01 X-39.79576 Y24.92051 G01 X-39.70673 Y24.93054 G01 X-39.62037 Y24.95025 G01 X-39.52236 Y24.98665 G01 X-39.50920 Y24.99361 G01 X-39.49622 Y25.00079 G01 X-39.49152 Y25.00349 G01 X-39.29162 Y25.08629 G01 X-39.08268 Y25.14230 G01 X-38.86818 Y25.17052 G01 X-38.65177 Y25.17052 G01 X-38.43727 Y25.14230 G01 X-38.22830 Y25.08629 G01 X-38.02848 Y25.00354 G01 X-38.02386 Y25.00087 G01 X-37.94164 Y24.96496 G01 X-37.85700 Y24.93884 G01 X-37.75408 Y24.92137 G01 X-37.73920 Y24.92081 G01 X-37.72421 Y24.92051 G01 X-37.23747 Y24.92051 G01 X-37.17026 Y24.91296 G01 X-37.08512 Y24.88317 G01 X-37.00867 Y24.83511 G01 X-36.94489 Y24.77133 G01 X-36.89683 Y24.69488 G01 X-36.86704 Y24.60974 G01 X-36.85950 Y24.54253 G01 X-36.85950 Y24.20179 G01 X-36.84944 Y24.11276 G01 X-36.82973 Y24.02643 G01 X-36.80489 Y23.95208 G01 X-36.76600 Y23.88401 G01 X-36.72742 Y23.82963 G01 X-36.68403 Y23.77824 G01 X-35.71175 Y22.80598 G01 X-35.64182 Y22.75020 G01 X-35.56684 Y22.70306 G01 X-35.49658 Y22.66798 G01 X-35.42084 Y22.64731 G01 X-35.35513 Y22.63616 G01 X-35.28823 Y22.63052 G01 X-34.33667 Y22.63052 G01 X-34.24761 Y22.64058 G01 X-34.16128 Y22.66029 G01 X-34.05683 Y22.70014 G01 X-34.03730 Y22.71093 G01 X-34.01805 Y22.72231 G01 X-33.98485 Y22.74314 G01 X-33.89968 Y22.77296 G01 X-33.83248 Y22.78050 G01 X-30.98747 Y22.78050 G01 X-30.92026 Y22.77296 G01 X-30.83507 Y22.74314 G01 X-30.80198 Y22.72234 G01 X-30.72131 Y22.68350 G01 X-30.63772 Y22.65424 G01 X-30.52789 Y22.63240 G01 X-30.50561 Y22.63115 G01 X-30.48331 Y22.63052 G01 X-29.93949 Y22.63052 G01 X-29.85047 Y22.64055 G01 X-29.76411 Y22.66026 G01 X-29.67958 Y22.68985 G01 X-29.60373 Y22.73750 G01 X-29.53449 Y22.79272 G01 X-29.47117 Y22.85604 G01 X-29.42352 Y22.93186 G01 X-29.38509 Y23.01164 G01 X-29.36109 Y23.07453 G01 X-29.34795 Y23.14055 G01 X-29.34298 Y23.18482 G01 X-29.34046 Y23.22950 G01 X-29.34046 Y25.53331 G01 X-29.31224 Y25.74771 G01 X-29.25623 Y25.95667 G01 X-29.17343 Y26.15660 G01 X-29.07071 Y26.33455 G01 X-29.06528 Y26.34392 G01 X-29.01905 Y26.40420 G01 X-28.93353 Y26.51563 G01 X-28.78232 Y26.66686 G01 X-28.72649 Y26.73688 G01 X-28.67938 Y26.81187 G01 X-28.64051 Y26.89254 G01 X-28.62057 Y26.97984 G01 X-28.61064 Y27.06785 G01 X-28.61052 Y27.15637 G01 X-28.62987 Y27.24278 G01 X-28.65796 Y27.32446 G01 X-28.69510 Y27.40330 G01 X-28.71824 Y27.44107 G01 X-28.78755 Y27.60841 G01 X-28.82982 Y27.78451 G01 X-28.84404 Y27.96503 G01 X-28.82982 Y28.14559 G01 X-28.81481 Y28.20818 G01 X-28.78755 Y28.32159 G01 X-28.71826 Y28.48895 G01 X-28.69515 Y28.52664 G01 X-28.65715 Y28.60787 G01 X-28.62885 Y28.69180 G01 X-28.60993 Y28.77930 G01 X-28.61092 Y28.86881 G01 X-28.62182 Y28.95669 G01 X-28.64237 Y29.04280 G01 X-28.68133 Y29.12225 G01 X-28.72771 Y29.19512 G01 X-28.78232 Y29.26319 G01 X-28.93355 Y29.41443 G01 X-29.06525 Y29.58608 G01 X-29.17343 Y29.77348 G01 X-29.25623 Y29.97338 G01 X-29.31224 Y30.18232 G01 X-29.34046 Y30.39682 G01 X-29.34046 Y30.61320 G01 X-29.31826 Y30.78186 G01 X-29.31224 Y30.82776 G01 X-29.25623 Y31.03667 G01 X-29.17343 Y31.23657 G01 X-29.06525 Y31.42397 G01 X-28.93353 Y31.59563 G01 X-27.68636 Y32.84279 G01 X-27.68174 Y32.84744 G01 X-27.51057 Y33.01861 G01 X-27.33892 Y33.15031 G01 X-27.15151 Y33.25849 G01 X-26.95167 Y33.34129 G01 X-26.74265 Y33.39730 G01 X-26.52817 Y33.42552 G01 X-21.98950 Y33.42552 G01 X-21.90047 Y33.43555 G01 X-21.81411 Y33.45526 G01 X-21.72958 Y33.48485 G01 X-21.65374 Y33.53250 G01 X-21.58449 Y33.58772 G01 X-21.52117 Y33.65104 G01 X-21.47352 Y33.72686 G01 X-21.43509 Y33.80664 G01 X-21.41109 Y33.86953 G01 X-21.39796 Y33.93555 G01 X-21.39298 Y33.97982 G01 X-21.39046 Y34.02450 G01 X-21.39046 Y38.06551 G01 X-21.40050 Y38.15454 G01 X-21.42021 Y38.24090 G01 X-21.44980 Y38.32543 G01 X-21.49745 Y38.40128 G01 X-21.55267 Y38.47052 G01 X-21.61599 Y38.53384 G01 X-21.69181 Y38.58149 G01 X-21.74223 Y38.60577 G01 X-21.77159 Y38.61992 G01 X-21.85615 Y38.64954 G01 X-21.94520 Y38.65957 G01 X-22.03377 Y38.65957 G01 X-22.12280 Y38.64954 G01 X-22.20735 Y38.61992 G01 X-22.28713 Y38.58149 G01 X-22.35406 Y38.54072 G01 X-22.41180 Y38.48769 G01 X-22.45622 Y38.43798 G01 X-22.49666 Y38.38421 G01 X-22.52587 Y38.33772 G01 X-22.58967 Y38.27392 G01 X-22.66610 Y38.22591 G01 X-22.75132 Y38.19609 G01 X-22.83024 Y38.18718 G01 X-22.83247 Y38.18703 G01 X-22.86623 Y38.18296 G01 X-22.92379 Y38.17354 G01 X-22.98282 Y38.15919 G01 X-23.05510 Y38.13569 G01 X-23.19508 Y38.11354 G01 X-26.02922 Y38.11354 G01 X-26.11824 Y38.10349 G01 X-26.20458 Y38.08378 G01 X-26.27892 Y38.05893 G01 X-26.34699 Y38.02005 G01 X-26.40138 Y37.98146 G01 X-26.45276 Y37.93808 G01 X-28.09167 Y36.29917 G01 X-28.14437 Y36.24644 G01 X-28.21379 Y36.19320 G01 X-28.31605 Y36.11472 G01 X-28.50338 Y36.00656 G01 X-28.70333 Y35.92376 G01 X-28.91227 Y35.86775 G01 X-29.12682 Y35.83953 G01 X-30.48331 Y35.83953 G01 X-30.57234 Y35.82947 G01 X-30.65867 Y35.80976 G01 X-30.76311 Y35.76991 G01 X-30.78265 Y35.75912 G01 X-30.80193 Y35.74774 G01 X-30.86921 Y35.70547 G01 X-30.93929 Y35.64959 G01 X-31.00193 Y35.58696 G01 X-31.05778 Y35.51690 G01 X-31.09667 Y35.43616 G01 X-31.12504 Y35.35505 G01 X-31.12590 Y35.35256 G01 X-31.14582 Y35.26529 G01 X-31.14582 Y35.17578 G01 X-31.13591 Y35.08779 G01 X-31.11811 Y35.00669 G01 X-31.08394 Y34.93103 G01 X-31.04574 Y34.86552 G01 X-31.00083 Y34.80316 G01 X-30.97884 Y34.77809 G01 X-30.84780 Y34.58198 G01 X-30.77287 Y34.43004 G01 X-30.77752 Y34.43004 G01 X-30.89316 Y34.64637 G01 X-30.93672 Y34.71157 G01 X-31.11084 Y34.92371 G01 X-31.16629 Y34.97916 G01 X-31.37843 Y35.15328 G01 X-31.44363 Y35.19684 G01 X-31.68567 Y35.32622 G01 X-31.75811 Y35.35622 G01 X-32.02075 Y35.43588 G01 X-32.09766 Y35.45119 G01 X-32.37078 Y35.47809 G01 X-32.44919 Y35.47809 G01 X-32.72232 Y35.45119 G01 X-32.79923 Y35.43588 G01 X-33.06187 Y35.35622 G01 X-33.13431 Y35.32622 G01 X-33.17987 Y35.30184 G01 X-33.37634 Y35.19684 G01 X-33.44154 Y35.15328 G01 X-33.65369 Y34.97916 G01 X-33.70913 Y34.92371 G01 X-33.88325 Y34.71157 G01 X-33.92681 Y34.64637 G01 X-34.04246 Y34.43004 G01 X-34.04708 Y34.43004 G01 X-33.97215 Y34.58198 G01 X-33.84111 Y34.77809 G01 X-33.81912 Y34.80316 G01 X-33.76783 Y34.87685 G01 X-33.72572 Y34.95478 G01 X-33.69222 Y35.03788 G01 X-33.67804 Y35.12638 G01 X-33.67393 Y35.21485 G01 X-33.67982 Y35.30415 G01 X-33.70540 Y35.38993 G01 X-33.74005 Y35.47141 G01 X-33.78028 Y35.54403 G01 X-33.83464 Y35.60679 G01 X-33.88996 Y35.65863 G01 X-33.95071 Y35.70547 G01 X-34.06128 Y35.77494 G01 X-34.12508 Y35.83872 G01 X-34.17309 Y35.91515 G01 X-34.20291 Y36.00032 G01 X-34.21045 Y36.06752 G01 X-34.21045 Y36.70824 G01 X-34.22051 Y36.79729 G01 X-34.24022 Y36.88363 G01 X-34.26506 Y36.95797 G01 X-34.30395 Y37.02604 G01 X-34.34253 Y37.08042 G01 X-34.38592 Y37.13181 G01 X-35.45820 Y38.20407 G01 X-35.52813 Y38.25985 G01 X-35.60311 Y38.30699 G01 X-35.67337 Y38.34207 G01 X-35.74911 Y38.36274 G01 X-35.81482 Y38.37389 G01 X-35.88175 Y38.37953 G01 X-38.86617 Y38.37953 G01 X-39.08067 Y38.40775 G01 X-39.28964 Y38.46376 G01 X-39.48949 Y38.54654 G01 X-39.49462 Y38.54948 G01 X-39.57631 Y38.58507 G01 X-39.66091 Y38.61118 G01 X-39.76386 Y38.62868 G01 X-39.77874 Y38.62924 G01 X-39.79375 Y38.62955 G01 X-40.28049 Y38.62955 G01 X-40.34768 Y38.63709 G01 X-40.43284 Y38.66688 G01 X-40.50927 Y38.71494 G01 X-40.57308 Y38.77872 G01 X-40.62108 Y38.85515 G01 X-40.65090 Y38.94037 G01 X-40.65847 Y39.00755 G01 X-40.65847 Y41.05250 G01 X-40.65090 Y41.11969 G01 X-40.62108 Y41.20490 G01 X-40.57308 Y41.28133 G01 X-40.50927 Y41.34511 G01 X-40.43284 Y41.39317 G01 X-40.34768 Y41.42296 G01 X-40.28049 Y41.43051 G01 X-39.79375 Y41.43051 G01 X-39.70470 Y41.44056 G01 X-39.61837 Y41.46027 G01 X-39.52037 Y41.49665 G01 X-39.50722 Y41.50361 G01 X-39.49424 Y41.51079 G01 X-39.48954 Y41.51349 G01 X-39.28964 Y41.59629 G01 X-39.08067 Y41.65230 G01 X-38.86617 Y41.68052 G01 X-34.84177 Y41.68052 G01 X-34.62727 Y41.65230 G01 X-34.41833 Y41.59629 G01 X-34.21843 Y41.51349 G01 X-34.03103 Y41.40531 G01 X-33.88818 Y41.29568 G01 X-33.85937 Y41.27358 G01 X-32.05176 Y39.46597 G01 X-31.98173 Y39.41014 G01 X-31.90675 Y39.36302 G01 X-31.83662 Y39.32799 G01 X-31.76098 Y39.30734 G01 X-31.69524 Y39.29617 G01 X-31.62821 Y39.29050 G01 X-30.98747 Y39.29050 G01 X-30.92026 Y39.28296 G01 X-30.83507 Y39.25314 G01 X-30.80198 Y39.23234 G01 X-30.72131 Y39.19350 G01 X-30.63772 Y39.16424 G01 X-30.52789 Y39.14240 G01 X-30.50561 Y39.14115 G01 X-30.48331 Y39.14052 G01 X-30.16675 Y39.14052 G01 X-30.07770 Y39.15058 G01 X-29.99136 Y39.17029 G01 X-29.91699 Y39.19515 G01 X-29.84887 Y39.23407 G01 X-29.79451 Y39.27265 G01 X-29.74323 Y39.31596 G01 X-29.51595 Y39.54321 G01 X-29.46004 Y39.61331 G01 X-29.41293 Y39.68832 G01 X-29.37795 Y39.75842 G01 X-29.35730 Y39.83401 G01 X-29.34612 Y39.89972 G01 X-29.34046 Y39.96678 G01 X-29.34046 Y42.04331 G01 X-29.31224 Y42.25771 G01 X-29.25623 Y42.46667 G01 X-29.17343 Y42.66660 G01 X-29.07071 Y42.84455 G01 X-29.06528 Y42.85395 G01 X-28.93355 Y43.02563 G01 X-28.78232 Y43.17686 G01 X-28.72649 Y43.24688 G01 X-28.67938 Y43.32187 G01 X-28.64051 Y43.40254 G01 X-28.62057 Y43.48984 G01 X-28.61064 Y43.57785 G01 X-28.61052 Y43.66637 G01 X-28.62987 Y43.75278 G01 X-28.65796 Y43.83446 G01 X-28.69515 Y43.91336 G01 X-28.71824 Y43.95107 G01 X-28.78755 Y44.11838 G01 X-28.82982 Y44.29451 G01 X-28.84404 Y44.47503 G01 X-28.82982 Y44.65557 G01 X-28.78758 Y44.83157 G01 X-28.71826 Y44.99895 G01 X-28.69515 Y45.03664 G01 X-28.65715 Y45.11787 G01 X-28.62885 Y45.20180 G01 X-28.60993 Y45.28930 G01 X-28.61092 Y45.37881 G01 X-28.62182 Y45.46669 G01 X-28.64237 Y45.55280 G01 X-28.68133 Y45.63225 G01 X-28.72771 Y45.70512 G01 X-28.78232 Y45.77319 G01 X-28.93355 Y45.92443 G01 X-29.06525 Y46.09608 G01 X-29.14267 Y46.23017 G01 X-29.17343 Y46.28345 G01 X-29.25623 Y46.48338 G01 X-29.31224 Y46.69232 G01 X-29.34046 Y46.90682 G01 X-29.34046 Y47.12323 G01 X-29.31224 Y47.33773 G01 X-29.25623 Y47.54667 G01 X-29.17343 Y47.74657 G01 X-29.06525 Y47.93397 G01 X-28.93355 Y48.10563 G01 X-27.94107 Y49.09808 G01 X-27.93574 Y49.10344 G01 X-27.76457 Y49.27461 G01 X-27.63671 Y49.37270 G01 X-27.59289 Y49.40633 G01 X-27.40551 Y49.51449 G01 X-27.20567 Y49.59729 G01 X-27.13599 Y49.61593 G01 X-26.99665 Y49.65330 G01 X-26.78217 Y49.68152 G01 X-21.98950 Y49.68152 G01 X-21.90047 Y49.69155 G01 X-21.81411 Y49.71126 G01 X-21.72958 Y49.74085 G01 X-21.65374 Y49.78850 G01 X-21.58449 Y49.84372 G01 X-21.52117 Y49.90704 G01 X-21.47352 Y49.98286 G01 X-21.43509 Y50.06264 G01 X-21.41109 Y50.12553 G01 X-21.39796 Y50.19155 G01 X-21.39298 Y50.23582 G01 X-21.39046 Y50.28050 G01 X-21.39046 Y54.53703 G01 X-21.40052 Y54.62606 G01 X-21.42023 Y54.71239 G01 X-21.44980 Y54.79692 G01 X-21.49745 Y54.87274 G01 X-21.55267 Y54.94198 G01 X-21.61599 Y55.00533 G01 X-21.69181 Y55.05296 G01 X-21.74220 Y55.07724 G01 X-21.77159 Y55.09139 G01 X-21.85615 Y55.12100 G01 X-21.94520 Y55.13106 G01 X-22.03377 Y55.13106 G01 X-22.12280 Y55.12100 G01 X-22.20735 Y55.09139 G01 X-22.28713 Y55.05296 G01 X-22.37977 Y54.99113 G01 X-22.39643 Y54.97627 G01 X-22.41309 Y54.96055 G01 X-22.46270 Y54.91092 G01 X-22.53910 Y54.86291 G01 X-22.62432 Y54.83312 G01 X-22.70324 Y54.82418 G01 X-22.70547 Y54.82403 G01 X-22.73923 Y54.81996 G01 X-22.79679 Y54.81054 G01 X-22.85582 Y54.79619 G01 X-22.92810 Y54.77269 G01 X-23.06808 Y54.75057 G01 X-26.02922 Y54.75057 G01 X-26.11824 Y54.74049 G01 X-26.20458 Y54.72078 G01 X-26.27892 Y54.69593 G01 X-26.34699 Y54.65705 G01 X-26.40138 Y54.61846 G01 X-26.45276 Y54.57508 G01 X-28.09985 Y52.92799 G01 X-28.27137 Y52.75644 G01 X-28.39924 Y52.65835 G01 X-28.44305 Y52.62474 G01 X-28.63043 Y52.51656 G01 X-28.83033 Y52.43376 G01 X-29.03927 Y52.37775 G01 X-29.14648 Y52.36366 G01 X-29.21318 Y52.35487 G01 X-29.25377 Y52.34953 G01 X-30.48331 Y52.34953 G01 X-30.57234 Y52.33947 G01 X-30.65867 Y52.31976 G01 X-30.76311 Y52.27991 G01 X-30.78265 Y52.26912 G01 X-30.80193 Y52.25774 G01 X-30.86921 Y52.21547 G01 X-30.93929 Y52.15959 G01 X-31.00193 Y52.09696 G01 X-31.05778 Y52.02690 G01 X-31.09667 Y51.94616 G01 X-31.12504 Y51.86505 G01 X-31.12590 Y51.86256 G01 X-31.14582 Y51.77529 G01 X-31.14582 Y51.68578 G01 X-31.13591 Y51.59779 G01 X-31.11811 Y51.51669 G01 X-31.08394 Y51.44103 G01 X-31.04574 Y51.37552 G01 X-31.00083 Y51.31316 G01 X-30.97884 Y51.28809 G01 X-30.84780 Y51.09198 G01 X-30.77287 Y50.94004 G01 X-30.77752 Y50.94004 G01 X-30.89316 Y51.15637 G01 X-30.93672 Y51.22157 G01 X-31.11084 Y51.43371 G01 X-31.16629 Y51.48916 G01 X-31.37843 Y51.66328 G01 X-31.44363 Y51.70684 G01 X-31.68567 Y51.83622 G01 X-31.75811 Y51.86622 G01 X-32.02075 Y51.94588 G01 X-32.09766 Y51.96119 G01 X-32.37078 Y51.98809 G01 X-32.44919 Y51.98809 G01 X-32.72232 Y51.96119 G01 X-32.79923 Y51.94588 G01 X-33.06187 Y51.86622 G01 X-33.13431 Y51.83622 G01 X-33.17987 Y51.81184 G01 X-33.37634 Y51.70684 G01 X-33.44154 Y51.66328 G01 X-33.65369 Y51.48916 G01 X-33.70913 Y51.43371 G01 X-33.88325 Y51.22157 G01 X-33.92681 Y51.15637 G01 X-34.04246 Y50.94004 G01 X-34.04708 Y50.94004 G01 X-33.97215 Y51.09198 G01 X-33.84111 Y51.28809 G01 X-33.81912 Y51.31316 G01 X-33.76783 Y51.38685 G01 X-33.72572 Y51.46478 G01 X-33.69222 Y51.54788 G01 X-33.67804 Y51.63638 G01 X-33.67393 Y51.72485 G01 X-33.67982 Y51.81415 G01 X-33.70540 Y51.89993 G01 X-33.74005 Y51.98141 G01 X-33.78028 Y52.05403 G01 X-33.83464 Y52.11679 G01 X-33.88996 Y52.16863 G01 X-33.95071 Y52.21547 G01 X-34.06128 Y52.28494 G01 X-34.12508 Y52.34872 G01 X-34.17309 Y52.42515 G01 X-34.20291 Y52.51032 G01 X-34.21045 Y52.57752 G01 X-34.21045 Y53.21824 G01 X-34.22051 Y53.30729 G01 X-34.24022 Y53.39363 G01 X-34.26506 Y53.46797 G01 X-34.30395 Y53.53604 G01 X-34.34253 Y53.59042 G01 X-34.38592 Y53.64181 G01 X-35.45820 Y54.71410 G01 X-35.52813 Y54.76985 G01 X-35.60311 Y54.81699 G01 X-35.67337 Y54.85209 G01 X-35.74911 Y54.87274 G01 X-35.81482 Y54.88389 G01 X-35.88175 Y54.88953 G01 X-38.86818 Y54.88953 G01 X-39.08268 Y54.91778 G01 X-39.29162 Y54.97379 G01 X-39.49152 Y55.05656 G01 X-39.49622 Y55.05926 G01 X-39.57831 Y55.09510 G01 X-39.66294 Y55.12121 G01 X-39.76587 Y55.13868 G01 X-39.78075 Y55.13924 G01 X-39.79576 Y55.13955 G01 X-40.28248 Y55.13955 G01 X-40.34968 Y55.14711 G01 X-40.43483 Y55.17688 G01 X-40.51128 Y55.22494 G01 X-40.57508 Y55.28875 G01 X-40.62309 Y55.36517 G01 X-40.65291 Y55.45031 G01 X-40.66045 Y55.51752 G01 X-40.66045 Y57.56253 G01 X-40.65291 Y57.62974 G01 X-40.62312 Y57.71488 G01 X-40.57506 Y57.79133 G01 X-40.51128 Y57.85511 G01 X-40.43483 Y57.90317 G01 X-40.34968 Y57.93296 G01 X-40.28248 Y57.94051 G01 X-39.79576 Y57.94051 G01 X-39.70673 Y57.95054 G01 X-39.62037 Y57.97025 G01 X-39.52236 Y58.00665 G01 X-39.50920 Y58.01361 G01 X-39.49622 Y58.02079 G01 X-39.49152 Y58.02349 G01 X-39.29162 Y58.10629 G01 X-39.08268 Y58.16230 G01 X-38.86818 Y58.19052 G01 X-34.84177 Y58.19052 G01 X-34.62727 Y58.16230 G01 X-34.41833 Y58.10629 G01 X-34.21843 Y58.02349 G01 X-34.03103 Y57.91531 G01 X-33.88818 Y57.80568 G01 X-33.85937 Y57.78358 G01 X-32.05176 Y55.97597 G01 X-31.98173 Y55.92014 G01 X-31.90675 Y55.87302 G01 X-31.83662 Y55.83799 G01 X-31.76098 Y55.81734 G01 X-31.69524 Y55.80619 G01 X-31.62821 Y55.80053 G01 X-30.98747 Y55.80053 G01 X-30.92026 Y55.79296 G01 X-30.83507 Y55.76317 G01 X-30.80198 Y55.74234 G01 X-30.72131 Y55.70353 G01 X-30.63772 Y55.67424 G01 X-30.52789 Y55.65240 G01 X-30.50561 Y55.65115 G01 X-30.48331 Y55.65052 G01 X-30.29375 Y55.65052 G01 X-30.20470 Y55.66060 G01 X-30.11836 Y55.68029 G01 X-30.04399 Y55.70515 G01 X-29.97587 Y55.74407 G01 X-29.92151 Y55.78265 G01 X-29.87020 Y55.82598 G01 X-29.51592 Y56.18023 G01 X-29.46004 Y56.25031 G01 X-29.41293 Y56.32532 G01 X-29.37795 Y56.39545 G01 X-29.35730 Y56.47101 G01 X-29.34612 Y56.53675 G01 X-29.34046 Y56.60378 G01 X-29.34046 Y58.55331 G01 X-29.31224 Y58.76771 G01 X-29.25623 Y58.97667 G01 X-29.17343 Y59.17660 G01 X-29.07071 Y59.35455 G01 X-29.06528 Y59.36395 G01 X-28.93355 Y59.53563 G01 X-28.78232 Y59.68686 G01 X-28.72649 Y59.75688 G01 X-28.67938 Y59.83187 G01 X-28.64051 Y59.91254 G01 X-28.62057 Y59.99984 G01 X-28.61064 Y60.08785 G01 X-28.61052 Y60.17637 G01 X-28.62987 Y60.26278 G01 X-28.65796 Y60.34446 G01 X-28.69510 Y60.42330 G01 X-28.71824 Y60.46107 G01 X-28.78755 Y60.62841 G01 X-28.82982 Y60.80451 G01 X-28.84404 Y60.98503 G01 X-28.82982 Y61.16559 G01 X-28.81481 Y61.22818 G01 X-28.78755 Y61.34159 G01 X-28.71826 Y61.50895 G01 X-28.69515 Y61.54664 G01 X-28.65715 Y61.62787 G01 X-28.62885 Y61.71180 G01 X-28.60993 Y61.79930 G01 X-28.61092 Y61.88881 G01 X-28.62182 Y61.97669 G01 X-28.64237 Y62.06280 G01 X-28.68133 Y62.14225 G01 X-28.72771 Y62.21512 G01 X-28.78232 Y62.28319 G01 X-28.93355 Y62.43443 G01 X-29.06525 Y62.60608 G01 X-29.17343 Y62.79348 G01 X-29.25623 Y62.99338 G01 X-29.31224 Y63.20232 G01 X-29.34046 Y63.41682 G01 X-29.34046 Y63.63320 G01 X-29.31826 Y63.80186 G01 X-29.31224 Y63.84776 G01 X-29.25623 Y64.05667 G01 X-29.17343 Y64.25657 G01 X-29.06525 Y64.44397 G01 X-28.93353 Y64.61563 G01 X-27.68636 Y65.86279 G01 X-27.68174 Y65.86744 G01 X-27.51057 Y66.03861 G01 X-27.38271 Y66.13670 G01 X-27.33889 Y66.17033 G01 X-27.15151 Y66.27849 G01 X-26.95167 Y66.36129 G01 X-26.74265 Y66.41730 G01 X-26.52817 Y66.44552 G01 X-21.98950 Y66.44552 G01 X-21.90047 Y66.45555 G01 X-21.81411 Y66.47526 G01 X-21.72958 Y66.50485 G01 X-21.65374 Y66.55250 G01 X-21.58449 Y66.60772 G01 X-21.52117 Y66.67104 G01 X-21.47352 Y66.74686 G01 X-21.43509 Y66.82664 G01 X-21.41109 Y66.88953 G01 X-21.39796 Y66.95555 G01 X-21.39298 Y66.99982 G01 X-21.39046 Y67.04450 G01 X-21.39046 Y68.08425 G01 X-21.40052 Y68.17330 G01 X-21.42023 Y68.25964 G01 X-21.44507 Y68.33398 G01 X-21.48396 Y68.40205 G01 X-21.52254 Y68.45644 G01 X-21.56593 Y68.50782 G01 X-21.79011 Y68.73200 G01 X-22.11495 Y69.05682 G01 X-22.12610 Y69.06802 G01 X-22.12643 Y69.06832 G01 X-22.90049 Y69.84239 G01 X-22.97052 Y69.89822 G01 X-23.04550 Y69.94533 G01 X-23.12978 Y69.98544 G01 X-23.23283 Y70.02041 G01 X-23.45625 Y70.13063 G01 X-23.66341 Y70.26903 G01 X-23.85071 Y70.43329 G01 X-24.01497 Y70.62059 G01 X-24.15337 Y70.82775 G01 X-24.26358 Y71.05117 G01 X-24.34365 Y71.28709 G01 X-24.39226 Y71.53144 G01 X-24.40857 Y71.78003 G01 X-24.39226 Y72.02862 G01 X-24.34365 Y72.27296 G01 X-24.26358 Y72.50888 G01 X-24.15337 Y72.73230 G01 X-24.01497 Y72.93946 G01 X-23.90829 Y73.06113 G01 X-23.89993 Y73.07060 G01 X-23.85071 Y73.12676 G01 X-23.66341 Y73.29102 G01 X-23.45625 Y73.42943 G01 X-23.23283 Y73.53964 G01 X-22.99691 Y73.61970 G01 X-22.75256 Y73.66831 G01 X-22.50397 Y73.68462 G01 X-22.25538 Y73.66831 G01 X-22.01104 Y73.61970 G01 X-21.77512 Y73.53964 G01 X-21.55170 Y73.42943 G01 X-21.34454 Y73.29102 G01 X-21.15724 Y73.12676 G01 X-20.99298 Y72.93946 G01 X-20.85457 Y72.73232 G01 X-20.78455 Y72.59034 G01 X-20.73613 Y72.51487 G01 X-20.68025 Y72.44617 G01 X-20.61637 Y72.38350 G01 X-20.54017 Y72.33659 G01 X-20.46004 Y72.29890 G01 X-20.37518 Y72.27007 G01 X-20.28600 Y72.26087 G01 X-20.19743 Y72.26171 G01 X-20.10855 Y72.27258 G01 X-20.02432 Y72.30294 G01 X-19.94490 Y72.34210 G01 X-19.85371 Y72.40400 G01 X-19.83852 Y72.41772 G01 X-19.82377 Y72.43174 G01 X-19.53461 Y72.72089 G01 X-19.41996 Y72.80418 G01 X-19.31729 Y72.85648 G01 X-19.29362 Y72.86854 G01 X-19.22628 Y72.89044 G01 X-19.15885 Y72.91236 G01 X-19.01884 Y72.93451 G01 X-16.71806 Y72.93451 G01 X-16.68814 Y72.92978 G01 X-16.57813 Y72.91236 G01 X-16.50582 Y72.88886 G01 X-16.44473 Y72.87418 G01 X-16.38715 Y72.86506 G01 X-16.38697 Y72.86613 G01 X-16.36850 Y72.86227 G01 X-16.27389 Y72.85180 G01 X-16.18910 Y72.82214 G01 X-16.11267 Y72.77413 G01 X-16.04887 Y72.71033 G01 X-16.00086 Y72.63390 G01 X-15.97104 Y72.54868 G01 X-15.96210 Y72.46928 G01 X-15.96198 Y72.46753 G01 X-15.95791 Y72.43377 G01 X-15.94849 Y72.37621 G01 X-15.93414 Y72.31718 G01 X-15.91064 Y72.24490 G01 X-15.88849 Y72.10492 G01 X-15.88849 Y71.96311 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-27.11966 Y59.98998 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-27.11966 Y59.98998 G01 X-27.09551 Y59.98264 G01 X-27.02307 Y59.95264 G01 X-26.80696 Y59.83712 G01 X-26.74176 Y59.79356 G01 X-26.55233 Y59.63809 G01 X-26.49691 Y59.58267 G01 X-26.34143 Y59.39323 G01 X-26.29787 Y59.32803 G01 X-26.18235 Y59.11193 G01 X-26.15235 Y59.03949 G01 X-26.08123 Y58.80499 G01 X-26.06592 Y58.72808 G01 X-26.04192 Y58.48422 G01 X-26.03998 Y58.44500 G01 X-26.03998 Y56.55102 G01 X-23.13900 Y56.55102 G01 X-23.09978 Y56.54909 G01 X-23.00225 Y56.53949 G01 X-22.92534 Y56.52418 G01 X-22.83153 Y56.49575 G01 X-22.78393 Y56.47602 G01 X-22.71398 Y56.47602 G01 X-22.63595 Y56.46832 G01 X-22.56092 Y56.44556 G01 X-22.49176 Y56.40861 G01 X-22.43115 Y56.35885 G01 X-22.38139 Y56.29824 G01 X-22.34444 Y56.22908 G01 X-22.32168 Y56.15407 G01 X-22.31398 Y56.07604 G01 X-22.31398 Y56.00607 G01 X-22.29427 Y55.95847 G01 X-22.26582 Y55.86469 G01 X-22.25053 Y55.78778 G01 X-22.24091 Y55.69022 G01 X-22.24091 Y55.61181 G01 X-22.25053 Y55.51430 G01 X-22.26488 Y55.44206 G01 X-22.26582 Y55.43739 G01 X-22.29427 Y55.34356 G01 X-22.31398 Y55.29596 G01 X-22.31398 Y55.22601 G01 X-22.32168 Y55.14800 G01 X-22.34444 Y55.07295 G01 X-22.38139 Y55.00381 G01 X-22.42854 Y54.94633 G01 X-22.43522 Y54.93983 G01 X-22.48652 Y54.89776 G01 X-22.50253 Y54.88768 G01 X-22.55869 Y54.85766 G01 X-22.56976 Y54.85377 G01 X-22.63595 Y54.83370 G01 X-22.71398 Y54.82601 G01 X-22.78393 Y54.82601 G01 X-22.83153 Y54.80632 G01 X-22.92534 Y54.77785 G01 X-23.00225 Y54.76258 G01 X-23.09978 Y54.75293 G01 X-23.13900 Y54.75100 G01 X-26.32325 Y54.75100 G01 X-26.34143 Y54.72380 G01 X-26.49691 Y54.53437 G01 X-26.52325 Y54.50528 G01 X-28.19525 Y52.83328 G01 X-28.22433 Y52.80694 G01 X-28.41377 Y52.65146 G01 X-28.47897 Y52.60790 G01 X-28.69507 Y52.49238 G01 X-28.76751 Y52.46239 G01 X-29.00201 Y52.39127 G01 X-29.07892 Y52.37595 G01 X-29.32278 Y52.35195 G01 X-29.36200 Y52.35002 G01 X-30.70020 Y52.35002 G01 X-30.72715 Y52.31717 G01 X-30.78775 Y52.26742 G01 X-30.85692 Y52.23046 G01 X-30.93195 Y52.20770 G01 X-31.00998 Y52.20000 G01 X-33.81000 Y52.20000 G01 X-33.88803 Y52.20770 G01 X-33.96306 Y52.23046 G01 X-33.99836 Y52.24933 G01 X-34.04101 Y52.27465 G01 X-34.08483 Y52.31060 G01 X-34.09940 Y52.32517 G01 X-34.13822 Y52.37249 G01 X-34.14838 Y52.38865 G01 X-34.17835 Y52.44468 G01 X-34.18223 Y52.45583 G01 X-34.20230 Y52.52197 G01 X-34.21000 Y52.60000 G01 X-34.21000 Y53.46655 G01 X-35.63344 Y54.89002 G01 X-38.76000 Y54.89002 G01 X-38.79919 Y54.89195 G01 X-39.04306 Y54.91595 G01 X-39.11997 Y54.93127 G01 X-39.35446 Y55.00239 G01 X-39.42690 Y55.03238 G01 X-39.62825 Y55.14003 G01 X-40.26000 Y55.14003 G01 X-40.33803 Y55.14770 G01 X-40.40402 Y55.16771 G01 X-40.41534 Y55.17168 G01 X-40.47120 Y55.20155 G01 X-40.48758 Y55.21183 G01 X-40.53475 Y55.25057 G01 X-40.54946 Y55.26525 G01 X-40.58822 Y55.31247 G01 X-40.59840 Y55.32870 G01 X-40.62835 Y55.38471 G01 X-40.63223 Y55.39583 G01 X-40.65230 Y55.46200 G01 X-40.66000 Y55.54000 G01 X-40.66000 Y57.54002 G01 X-40.65230 Y57.61805 G01 X-40.63218 Y57.68440 G01 X-40.62837 Y57.69527 G01 X-40.59833 Y57.75148 G01 X-40.58827 Y57.76751 G01 X-40.54935 Y57.81493 G01 X-40.53490 Y57.82938 G01 X-40.48743 Y57.86832 G01 X-40.47155 Y57.87830 G01 X-40.41517 Y57.90845 G01 X-40.40475 Y57.91208 G01 X-40.33803 Y57.93233 G01 X-40.26000 Y57.94002 G01 X-39.62825 Y57.94002 G01 X-39.42690 Y58.04764 G01 X-39.35446 Y58.07764 G01 X-39.11997 Y58.14876 G01 X-39.04306 Y58.16408 G01 X-38.79919 Y58.18808 G01 X-38.76000 Y58.19001 G01 X-34.95000 Y58.19001 G01 X-34.91078 Y58.18808 G01 X-34.66692 Y58.16408 G01 X-34.59001 Y58.14876 G01 X-34.35551 Y58.07764 G01 X-34.28307 Y58.04764 G01 X-34.06697 Y57.93212 G01 X-34.00177 Y57.88856 G01 X-33.81233 Y57.73309 G01 X-33.78325 Y57.70675 G01 X-31.87652 Y55.80005 G01 X-31.00998 Y55.80005 G01 X-30.93195 Y55.79233 G01 X-30.86487 Y55.77198 G01 X-30.85491 Y55.76850 G01 X-30.78775 Y55.73261 G01 X-30.72715 Y55.68288 G01 X-30.70020 Y55.65003 G01 X-30.04544 Y55.65003 G01 X-29.33998 Y56.35549 G01 X-29.33998 Y58.44500 G01 X-29.33805 Y58.48422 G01 X-29.31404 Y58.72808 G01 X-29.29873 Y58.80499 G01 X-29.22761 Y59.03949 G01 X-29.19761 Y59.11193 G01 X-29.08209 Y59.32803 G01 X-29.03853 Y59.39323 G01 X-28.88306 Y59.58267 G01 X-28.82763 Y59.63809 G01 X-28.63820 Y59.79356 G01 X-28.57300 Y59.83712 G01 X-28.35690 Y59.95264 G01 X-28.28446 Y59.98264 G01 X-28.26025 Y59.98998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-28.26025 Y61.98007 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-28.26025 Y61.98007 G01 X-28.29523 Y61.96138 G01 X-28.36043 Y61.91781 G01 X-28.47407 Y61.82455 G01 X-28.52951 Y61.76910 G01 X-28.62278 Y61.65546 G01 X-28.66637 Y61.59026 G01 X-28.73566 Y61.46059 G01 X-28.76568 Y61.38815 G01 X-28.80836 Y61.24743 G01 X-28.82365 Y61.17055 G01 X-28.83805 Y61.02422 G01 X-28.83805 Y60.94581 G01 X-28.82365 Y60.79948 G01 X-28.80836 Y60.72259 G01 X-28.76568 Y60.58188 G01 X-28.73566 Y60.50944 G01 X-28.66637 Y60.37977 G01 X-28.62278 Y60.31457 G01 X-28.52951 Y60.20093 G01 X-28.47407 Y60.14548 G01 X-28.36043 Y60.05221 G01 X-28.29523 Y60.00865 G01 X-28.26025 Y59.98998 G01 X-28.14453 Y59.97858 G01 X-28.07320 Y59.97502 G01 X-28.02604 Y59.97502 G01 X-27.96348 Y59.97197 G01 X-27.92174 Y59.96786 G01 X-27.86429 Y59.96501 G01 X-27.51565 Y59.96501 G01 X-27.45819 Y59.96786 G01 X-27.41646 Y59.97197 G01 X-27.35390 Y59.97502 G01 X-27.30673 Y59.97502 G01 X-27.23541 Y59.97858 G01 X-27.11966 Y59.98998 G01 X-27.08476 Y60.00865 G01 X-27.01956 Y60.05221 G01 X-26.97958 Y60.08500 G01 X-23.31383 Y60.08500 G01 X-23.22320 Y60.01063 G01 X-23.15800 Y59.96707 G01 X-23.01970 Y59.89313 G01 X-22.94726 Y59.86313 G01 X-22.79717 Y59.81762 G01 X-22.72026 Y59.80230 G01 X-22.56420 Y59.78693 G01 X-22.48579 Y59.78693 G01 X-22.32971 Y59.80230 G01 X-22.25279 Y59.81762 G01 X-22.10273 Y59.86313 G01 X-22.03029 Y59.89313 G01 X-21.89196 Y59.96707 G01 X-21.82679 Y60.01063 G01 X-21.70555 Y60.11012 G01 X-21.65010 Y60.16557 G01 X-21.55061 Y60.28680 G01 X-21.50705 Y60.35201 G01 X-21.43311 Y60.49031 G01 X-21.40311 Y60.56275 G01 X-21.38996 Y60.60608 G01 X-21.38998 Y49.68101 G01 X-26.67399 Y49.68101 G01 X-26.71319 Y49.67908 G01 X-26.95705 Y49.65508 G01 X-27.03396 Y49.63976 G01 X-27.26846 Y49.56864 G01 X-27.34090 Y49.53864 G01 X-27.55700 Y49.42312 G01 X-27.62220 Y49.37956 G01 X-27.81163 Y49.22409 G01 X-27.84072 Y49.19775 G01 X-28.85672 Y48.18175 G01 X-28.88306 Y48.15267 G01 X-29.03853 Y47.96323 G01 X-29.08209 Y47.89803 G01 X-29.19761 Y47.68193 G01 X-29.22761 Y47.60949 G01 X-29.29873 Y47.37499 G01 X-29.31404 Y47.29808 G01 X-29.33805 Y47.05422 G01 X-29.33805 Y46.97581 G01 X-29.31404 Y46.73194 G01 X-29.29873 Y46.65503 G01 X-29.22761 Y46.42054 G01 X-29.19761 Y46.34810 G01 X-29.08209 Y46.13199 G01 X-29.03853 Y46.06679 G01 X-28.88306 Y45.87736 G01 X-28.82763 Y45.82194 G01 X-28.63820 Y45.66646 G01 X-28.57300 Y45.62290 G01 X-28.35690 Y45.50738 G01 X-28.28446 Y45.47739 G01 X-28.26025 Y45.47007 G01 X-28.14453 Y45.48147 G01 X-28.07320 Y45.48503 G01 X-28.02604 Y45.48503 G01 X-27.96348 Y45.48808 G01 X-27.92174 Y45.49219 G01 X-27.86429 Y45.49504 G01 X-27.51565 Y45.49504 G01 X-27.45819 Y45.49219 G01 X-27.41646 Y45.48808 G01 X-27.35390 Y45.48503 G01 X-27.30673 Y45.48503 G01 X-27.23541 Y45.48147 G01 X-27.11964 Y45.47007 G01 X-27.09551 Y45.47739 G01 X-27.02307 Y45.50738 G01 X-26.80696 Y45.62290 G01 X-26.74176 Y45.66646 G01 X-26.63795 Y45.75165 G01 X-26.55233 Y45.82194 G01 X-26.52325 Y45.84828 G01 X-25.99053 Y46.38102 G01 X-21.38998 Y46.38102 G01 X-21.38998 Y33.42501 G01 X-26.41999 Y33.42501 G01 X-26.45919 Y33.42308 G01 X-26.70305 Y33.39908 G01 X-26.77996 Y33.38376 G01 X-27.01446 Y33.31264 G01 X-27.08690 Y33.28264 G01 X-27.30300 Y33.16712 G01 X-27.36820 Y33.12356 G01 X-27.55763 Y32.96809 G01 X-27.58672 Y32.94175 G01 X-28.85672 Y31.67175 G01 X-28.88306 Y31.64267 G01 X-29.03853 Y31.45323 G01 X-29.08209 Y31.38803 G01 X-29.19761 Y31.17193 G01 X-29.22761 Y31.09949 G01 X-29.29873 Y30.86499 G01 X-29.31404 Y30.78808 G01 X-29.33805 Y30.54422 G01 X-29.33805 Y30.46581 G01 X-29.31404 Y30.22194 G01 X-29.29873 Y30.14503 G01 X-29.22761 Y29.91054 G01 X-29.19761 Y29.83810 G01 X-29.08209 Y29.62199 G01 X-29.03853 Y29.55679 G01 X-28.88306 Y29.36736 G01 X-28.82763 Y29.31194 G01 X-28.63820 Y29.15646 G01 X-28.57300 Y29.11290 G01 X-28.35690 Y28.99738 G01 X-28.28446 Y28.96739 G01 X-28.26025 Y28.96007 G01 X-28.14453 Y28.97147 G01 X-28.07320 Y28.97503 G01 X-28.02604 Y28.97503 G01 X-27.96348 Y28.97808 G01 X-27.92174 Y28.98219 G01 X-27.86429 Y28.98504 G01 X-27.51565 Y28.98504 G01 X-27.45819 Y28.98219 G01 X-27.41646 Y28.97808 G01 X-27.35390 Y28.97503 G01 X-27.30673 Y28.97503 G01 X-27.23541 Y28.97147 G01 X-27.11964 Y28.96007 G01 X-27.09551 Y28.96739 G01 X-27.02307 Y28.99738 G01 X-26.80696 Y29.11290 G01 X-26.74176 Y29.15646 G01 X-26.63795 Y29.24165 G01 X-26.55233 Y29.31194 G01 X-26.52325 Y29.33828 G01 X-25.73653 Y30.12502 G01 X-21.38998 Y30.12502 G01 X-21.38998 Y19.09347 G01 X-23.56844 Y16.91501 G01 X-26.41999 Y16.91501 G01 X-26.45919 Y16.91308 G01 X-26.70305 Y16.88908 G01 X-26.77996 Y16.87376 G01 X-27.01446 Y16.80264 G01 X-27.08690 Y16.77264 G01 X-27.30300 Y16.65712 G01 X-27.36820 Y16.61356 G01 X-27.55763 Y16.45809 G01 X-27.58672 Y16.43175 G01 X-28.85672 Y15.16175 G01 X-28.88306 Y15.13267 G01 X-29.03853 Y14.94323 G01 X-29.08209 Y14.87803 G01 X-29.19761 Y14.66193 G01 X-29.22761 Y14.58949 G01 X-29.29873 Y14.35499 G01 X-29.31404 Y14.27808 G01 X-29.33805 Y14.03422 G01 X-29.33805 Y13.95581 G01 X-29.31404 Y13.71194 G01 X-29.29873 Y13.63503 G01 X-29.22761 Y13.40054 G01 X-29.19761 Y13.32810 G01 X-29.08209 Y13.11199 G01 X-29.03853 Y13.04679 G01 X-28.88306 Y12.85736 G01 X-28.82763 Y12.80194 G01 X-28.63820 Y12.64646 G01 X-28.57300 Y12.60290 G01 X-28.35690 Y12.48738 G01 X-28.28446 Y12.45739 G01 X-28.26025 Y12.45007 G01 X-28.14453 Y12.46147 G01 X-28.07320 Y12.46503 G01 X-28.02604 Y12.46503 G01 X-27.96348 Y12.46808 G01 X-27.92174 Y12.47219 G01 X-27.86429 Y12.47504 G01 X-27.71656 Y12.47501 G01 X-27.66338 Y12.47504 G01 X-27.51565 Y12.47504 G01 X-27.45819 Y12.47219 G01 X-27.41646 Y12.46808 G01 X-27.35390 Y12.46503 G01 X-27.30673 Y12.46503 G01 X-27.23541 Y12.46147 G01 X-27.11964 Y12.45007 G01 X-27.09551 Y12.45739 G01 X-27.02307 Y12.48738 G01 X-26.80696 Y12.60290 G01 X-26.74176 Y12.64646 G01 X-26.63795 Y12.73165 G01 X-26.55233 Y12.80194 G01 X-26.52325 Y12.82828 G01 X-25.73653 Y13.61502 G01 X-22.88500 Y13.61502 G01 X-22.84578 Y13.61695 G01 X-22.60192 Y13.64095 G01 X-22.52501 Y13.65627 G01 X-22.29051 Y13.72739 G01 X-22.21807 Y13.75738 G01 X-22.00197 Y13.87290 G01 X-21.93677 Y13.91646 G01 X-21.74733 Y14.07194 G01 X-21.71825 Y14.09828 G01 X-18.57325 Y17.24328 G01 X-18.54691 Y17.27236 G01 X-18.39144 Y17.46180 G01 X-18.34787 Y17.52700 G01 X-18.23235 Y17.74310 G01 X-18.20236 Y17.81554 G01 X-18.13124 Y18.05003 G01 X-18.11592 Y18.12694 G01 X-18.09192 Y18.37081 G01 X-18.08999 Y18.41000 G01 X-18.08999 Y69.01602 G01 X-18.09192 Y69.05524 G01 X-18.11592 Y69.29911 G01 X-18.13124 Y69.37602 G01 X-18.20236 Y69.61051 G01 X-18.23238 Y69.68295 G01 X-18.34787 Y69.89908 G01 X-18.39146 Y69.96426 G01 X-18.54691 Y70.15369 G01 X-18.57327 Y70.18277 G01 X-19.02217 Y70.63164 G01 X-19.04985 Y70.65935 G01 X-18.57520 Y71.13400 G01 X-16.78900 Y71.13400 G01 X-16.74978 Y71.13593 G01 X-16.65225 Y71.14556 G01 X-16.57534 Y71.16085 G01 X-16.48153 Y71.18930 G01 X-16.43393 Y71.20901 G01 X-16.36398 Y71.20901 G01 X-16.28595 Y71.21670 G01 X-16.21976 Y71.23677 G01 X-16.20869 Y71.24066 G01 X-16.15253 Y71.27065 G01 X-16.13650 Y71.28074 G01 X-16.08905 Y71.31968 G01 X-16.07465 Y71.33408 G01 X-16.03566 Y71.38158 G01 X-16.02570 Y71.39745 G01 X-15.99558 Y71.45379 G01 X-15.99185 Y71.46443 G01 X-15.97168 Y71.53098 G01 X-15.96398 Y71.60901 G01 X-15.96398 Y71.67896 G01 X-15.94427 Y71.72656 G01 X-15.91582 Y71.82036 G01 X-15.90053 Y71.89727 G01 X-15.89091 Y71.99481 G01 X-15.89091 Y72.07322 G01 X-15.90053 Y72.17075 G01 X-15.91582 Y72.24766 G01 X-15.94427 Y72.34147 G01 X-15.96398 Y72.38907 G01 X-15.96398 Y72.45902 G01 X-15.97168 Y72.53705 G01 X-15.99190 Y72.60372 G01 X-15.99555 Y72.61419 G01 X-16.02578 Y72.67073 G01 X-16.03561 Y72.68635 G01 X-16.07478 Y72.73407 G01 X-16.08893 Y72.74822 G01 X-16.13663 Y72.78739 G01 X-16.15227 Y72.79722 G01 X-16.20881 Y72.82745 G01 X-16.21923 Y72.83108 G01 X-16.28595 Y72.85132 G01 X-16.36398 Y72.85902 G01 X-16.43393 Y72.85902 G01 X-16.48153 Y72.87873 G01 X-16.57534 Y72.90718 G01 X-16.65225 Y72.92247 G01 X-16.74978 Y72.93209 G01 X-16.78900 Y72.93402 G01 X-18.94800 Y72.93402 G01 X-18.98719 Y72.93209 G01 X-19.08473 Y72.92247 G01 X-19.16164 Y72.90718 G01 X-19.25544 Y72.87873 G01 X-19.32788 Y72.84873 G01 X-19.41432 Y72.80253 G01 X-19.47952 Y72.75894 G01 X-19.55529 Y72.69676 G01 X-19.58437 Y72.67040 G01 X-20.32265 Y71.93215 G01 X-20.68084 Y72.29031 G01 X-20.73540 Y72.47014 G01 X-20.76540 Y72.54258 G01 X-20.90400 Y72.80192 G01 X-20.94759 Y72.86712 G01 X-21.13413 Y73.09442 G01 X-21.18958 Y73.14987 G01 X-21.41688 Y73.33641 G01 X-21.48208 Y73.38000 G01 X-21.74142 Y73.51860 G01 X-21.81386 Y73.54860 G01 X-22.09524 Y73.63397 G01 X-22.17215 Y73.64926 G01 X-22.46478 Y73.67809 G01 X-22.54319 Y73.67809 G01 X-22.83583 Y73.64926 G01 X-22.91274 Y73.63397 G01 X-23.19412 Y73.54860 G01 X-23.26656 Y73.51860 G01 X-23.52589 Y73.38000 G01 X-23.59109 Y73.33641 G01 X-23.81840 Y73.14987 G01 X-23.87385 Y73.09442 G01 X-24.06038 Y72.86712 G01 X-24.10397 Y72.80192 G01 X-24.24258 Y72.54258 G01 X-24.27258 Y72.47014 G01 X-24.35795 Y72.18876 G01 X-24.37324 Y72.11185 G01 X-24.40207 Y71.81922 G01 X-24.40207 Y71.74081 G01 X-24.37324 Y71.44817 G01 X-24.35795 Y71.37126 G01 X-24.27258 Y71.08988 G01 X-24.24258 Y71.01744 G01 X-24.10397 Y70.75811 G01 X-24.06038 Y70.69291 G01 X-23.87385 Y70.46560 G01 X-23.81840 Y70.41015 G01 X-23.59109 Y70.22361 G01 X-23.52589 Y70.18003 G01 X-23.26656 Y70.04142 G01 X-23.19412 Y70.01142 G01 X-23.01429 Y69.95686 G01 X-22.01972 Y68.96228 G01 X-21.38998 Y68.33256 G01 X-21.38998 Y66.44501 G01 X-26.41999 Y66.44501 G01 X-26.45919 Y66.44308 G01 X-26.70305 Y66.41908 G01 X-26.77996 Y66.40376 G01 X-27.01446 Y66.33264 G01 X-27.08690 Y66.30264 G01 X-27.30300 Y66.18712 G01 X-27.36820 Y66.14356 G01 X-27.55763 Y65.98809 G01 X-27.58672 Y65.96175 G01 X-28.85672 Y64.69175 G01 X-28.88306 Y64.66267 G01 X-29.03853 Y64.47323 G01 X-29.08209 Y64.40803 G01 X-29.19761 Y64.19193 G01 X-29.22761 Y64.11949 G01 X-29.29873 Y63.88499 G01 X-29.31404 Y63.80808 G01 X-29.33805 Y63.56422 G01 X-29.33805 Y63.48581 G01 X-29.31404 Y63.24194 G01 X-29.29873 Y63.16503 G01 X-29.22761 Y62.93054 G01 X-29.19761 Y62.85810 G01 X-29.08209 Y62.64199 G01 X-29.03853 Y62.57679 G01 X-28.88306 Y62.38736 G01 X-28.82763 Y62.33194 G01 X-28.63820 Y62.17646 G01 X-28.57300 Y62.13290 G01 X-28.35690 Y62.01738 G01 X-28.28446 Y61.98739 G01 X-28.26025 Y61.98007 G01 X-28.14453 Y61.99147 G01 X-28.07320 Y61.99503 G01 X-28.02604 Y61.99503 G01 X-27.96348 Y61.99808 G01 X-27.92174 Y62.00219 G01 X-27.86429 Y62.00504 G01 X-27.51565 Y62.00504 G01 X-27.45819 Y62.00219 G01 X-27.41646 Y61.99808 G01 X-27.35390 Y61.99503 G01 X-27.30673 Y61.99503 G01 X-27.23541 Y61.99147 G01 X-27.11964 Y61.98007 G01 X-27.09551 Y61.98739 G01 X-27.02307 Y62.01738 G01 X-26.80696 Y62.13290 G01 X-26.74176 Y62.17646 G01 X-26.63795 Y62.26165 G01 X-26.55233 Y62.33194 G01 X-26.52325 Y62.35828 G01 X-25.73653 Y63.14502 G01 X-21.38998 Y63.14502 G01 X-21.38996 Y61.36392 G01 X-21.37342 Y61.25244 G01 X-21.36605 Y61.17794 G01 X-21.35836 Y61.02112 G01 X-21.35836 Y60.94891 G01 X-21.36605 Y60.79211 G01 X-21.37342 Y60.71761 G01 X-21.38996 Y60.60608 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-21.38996 Y61.36392 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-21.38996 Y61.36392 G01 X-21.40311 Y61.40727 G01 X-21.43311 Y61.47972 G01 X-21.50705 Y61.61802 G01 X-21.55061 Y61.68322 G01 X-21.65010 Y61.80445 G01 X-21.70555 Y61.85990 G01 X-21.75419 Y61.89983 G01 X-21.82679 Y61.95939 G01 X-21.89196 Y62.00296 G01 X-22.03029 Y62.07690 G01 X-22.10273 Y62.10689 G01 X-22.25279 Y62.15241 G01 X-22.32971 Y62.16773 G01 X-22.48579 Y62.18309 G01 X-22.56420 Y62.18309 G01 X-22.72026 Y62.16773 G01 X-22.79717 Y62.15241 G01 X-22.94726 Y62.10689 G01 X-23.01970 Y62.07690 G01 X-23.15800 Y62.00296 G01 X-23.22320 Y61.95939 G01 X-23.31383 Y61.88502 G01 X-26.97958 Y61.88502 G01 X-27.01956 Y61.91781 G01 X-27.08476 Y61.96138 G01 X-27.11964 Y61.98007 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-30.77287 Y65.95001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-30.77287 Y65.95001 G01 X-30.77752 Y65.95001 G01 X-30.89316 Y65.73366 G01 X-30.93672 Y65.66846 G01 X-31.11084 Y65.45631 G01 X-31.16629 Y65.40087 G01 X-31.37843 Y65.22675 G01 X-31.44363 Y65.18319 G01 X-31.65996 Y65.06754 G01 X-31.65996 Y65.06292 G01 X-31.50802 Y65.13785 G01 X-31.31186 Y65.26891 G01 X-31.13446 Y65.42451 G01 X-30.97886 Y65.60191 G01 X-30.84780 Y65.79807 G01 X-30.77287 Y65.95001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-30.77287 Y67.45004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-30.77287 Y67.45004 G01 X-30.77752 Y67.45004 G01 X-30.89316 Y67.66637 G01 X-30.93672 Y67.73157 G01 X-31.11084 Y67.94371 G01 X-31.16629 Y67.99916 G01 X-31.37843 Y68.17328 G01 X-31.44363 Y68.21684 G01 X-31.65996 Y68.33248 G01 X-31.65996 Y68.33713 G01 X-31.50802 Y68.26220 G01 X-31.31186 Y68.13114 G01 X-31.13446 Y67.97554 G01 X-30.97886 Y67.79814 G01 X-30.84780 Y67.60198 G01 X-30.77287 Y67.45004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-25.68398 Y70.28000 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-25.68398 Y70.28000 G01 X-25.68398 Y70.25760 G01 X-25.69155 Y70.19047 G01 X-25.72132 Y70.10538 G01 X-25.76927 Y70.02905 G01 X-25.83300 Y69.96532 G01 X-25.90930 Y69.91737 G01 X-25.99442 Y69.88760 G01 X-26.06155 Y69.88003 G01 X-26.08395 Y69.88003 G01 X-26.00595 Y69.88770 G01 X-25.93092 Y69.91046 G01 X-25.86175 Y69.94742 G01 X-25.80115 Y69.99717 G01 X-25.75139 Y70.05778 G01 X-25.71443 Y70.12694 G01 X-25.69167 Y70.20197 G01 X-25.68398 Y70.28000 G01 X-25.68398 Y71.03001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-25.68398 Y72.53004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-25.68398 Y72.53004 G01 X-25.68398 Y73.30245 G01 X-25.69155 Y73.36958 G01 X-25.72132 Y73.45467 G01 X-25.76927 Y73.53100 G01 X-25.83300 Y73.59473 G01 X-25.90930 Y73.64268 G01 X-25.99442 Y73.67245 G01 X-26.06155 Y73.68002 G01 X-26.83396 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-25.68398 Y73.28002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-25.68398 Y73.28002 G01 X-25.69167 Y73.35805 G01 X-25.71443 Y73.43308 G01 X-25.75139 Y73.50225 G01 X-25.80115 Y73.56285 G01 X-25.86175 Y73.61261 G01 X-25.93092 Y73.64957 G01 X-26.00595 Y73.67233 G01 X-26.08398 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-28.33399 Y73.68002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-28.33399 Y73.68002 G01 X-29.10640 Y73.68002 G01 X-29.17353 Y73.67245 G01 X-29.25862 Y73.64268 G01 X-29.33495 Y73.59473 G01 X-29.39868 Y73.53100 G01 X-29.44663 Y73.45470 G01 X-29.47640 Y73.36958 G01 X-29.48397 Y73.30245 G01 X-29.48397 Y73.28005 G01 X-29.47630 Y73.35805 G01 X-29.45354 Y73.43308 G01 X-29.41658 Y73.50225 G01 X-29.36683 Y73.56285 G01 X-29.30622 Y73.61261 G01 X-29.23706 Y73.64957 G01 X-29.16203 Y73.67233 G01 X-29.08400 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-29.08402 Y69.88003 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-29.08402 Y69.88003 G01 X-29.16203 Y69.88770 G01 X-29.23706 Y69.91046 G01 X-29.30622 Y69.94742 G01 X-29.36670 Y69.99707 G01 X-29.33495 Y69.96532 G01 X-29.25862 Y69.91737 G01 X-29.17353 Y69.88760 G01 X-29.10640 Y69.88003 G01 X-29.08402 Y69.88003 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-29.36693 Y69.99730 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-29.36693 Y69.99730 G01 X-29.41658 Y70.05778 G01 X-29.45354 Y70.12694 G01 X-29.47630 Y70.20197 G01 X-29.48397 Y70.27998 G01 X-29.48397 Y70.25760 G01 X-29.47640 Y70.19047 G01 X-29.44663 Y70.10535 G01 X-29.39868 Y70.02905 G01 X-29.36693 Y69.99730 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-31.76799 Y71.00754 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-31.76799 Y71.00754 G01 X-31.77553 Y70.94043 G01 X-31.80530 Y70.85539 G01 X-31.85326 Y70.77906 G01 X-31.88511 Y70.74721 G01 X-31.94576 Y70.69743 G01 X-32.01490 Y70.66047 G01 X-32.08996 Y70.63771 G01 X-32.16784 Y70.63004 G01 X-32.14548 Y70.63004 G01 X-32.07838 Y70.63758 G01 X-31.99334 Y70.66735 G01 X-31.91701 Y70.71531 G01 X-31.88511 Y70.74721 G01 X-31.83540 Y70.80779 G01 X-31.79844 Y70.87693 G01 X-31.77569 Y70.95199 G01 X-31.76799 Y71.03001 G01 X-31.76799 Y71.00754 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-31.76799 Y72.53004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-31.76799 Y72.53004 G01 X-31.77569 Y72.60804 G01 X-31.79844 Y72.68310 G01 X-31.83540 Y72.75224 G01 X-31.88513 Y72.81287 G01 X-31.94576 Y72.86260 G01 X-32.01490 Y72.89956 G01 X-32.08996 Y72.92231 G01 X-32.16796 Y72.93001 G01 X-32.14548 Y72.93001 G01 X-32.07838 Y72.92247 G01 X-31.99334 Y72.89270 G01 X-31.91701 Y72.84474 G01 X-31.88513 Y72.81287 G01 X-31.85326 Y72.78099 G01 X-31.80530 Y72.70466 G01 X-31.77553 Y72.61962 G01 X-31.76799 Y72.55252 G01 X-31.76799 Y72.53004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.66799 Y72.93001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.66799 Y72.93001 G01 X-33.74601 Y72.92231 G01 X-33.82107 Y72.89956 G01 X-33.89021 Y72.86260 G01 X-33.95079 Y72.81289 G01 X-34.00057 Y72.75224 G01 X-34.03753 Y72.68310 G01 X-34.06029 Y72.60804 G01 X-34.06796 Y72.53016 G01 X-34.06796 Y72.55252 G01 X-34.06042 Y72.61962 G01 X-34.03065 Y72.70466 G01 X-33.98269 Y72.78099 G01 X-33.91894 Y72.84474 G01 X-33.84261 Y72.89270 G01 X-33.75757 Y72.92247 G01 X-33.69046 Y72.93001 G01 X-33.66799 Y72.93001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.95097 Y70.74736 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.95097 Y70.74736 G01 X-34.00057 Y70.80779 G01 X-34.03753 Y70.87693 G01 X-34.06029 Y70.95199 G01 X-34.06796 Y71.02986 G01 X-34.06796 Y71.00754 G01 X-34.06042 Y70.94043 G01 X-34.03065 Y70.85539 G01 X-33.98269 Y70.77906 G01 X-33.95097 Y70.74736 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.66814 Y70.63004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.66814 Y70.63004 G01 X-33.74601 Y70.63771 G01 X-33.82107 Y70.66047 G01 X-33.89021 Y70.69743 G01 X-33.95064 Y70.74703 G01 X-33.91894 Y70.71531 G01 X-33.84261 Y70.66735 G01 X-33.75757 Y70.63758 G01 X-33.69046 Y70.63004 G01 X-33.66814 Y70.63004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.15999 Y68.33248 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.15999 Y68.33248 G01 X-33.37634 Y68.21684 G01 X-33.44154 Y68.17328 G01 X-33.65369 Y67.99916 G01 X-33.70913 Y67.94371 G01 X-33.88325 Y67.73157 G01 X-33.92681 Y67.66637 G01 X-34.04246 Y67.45004 G01 X-34.04708 Y67.45004 G01 X-33.97215 Y67.60198 G01 X-33.84109 Y67.79814 G01 X-33.68549 Y67.97554 G01 X-33.50809 Y68.13114 G01 X-33.31193 Y68.26220 G01 X-33.15999 Y68.33713 G01 X-33.15999 Y68.33248 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.15999 Y65.06292 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.15999 Y65.06292 G01 X-33.31193 Y65.13785 G01 X-33.50809 Y65.26891 G01 X-33.68549 Y65.42451 G01 X-33.84109 Y65.60191 G01 X-33.97215 Y65.79807 G01 X-34.04708 Y65.95001 G01 X-34.04246 Y65.95001 G01 X-33.92681 Y65.73366 G01 X-33.88325 Y65.66846 G01 X-33.70913 Y65.45631 G01 X-33.65369 Y65.40087 G01 X-33.44154 Y65.22675 G01 X-33.37634 Y65.18319 G01 X-33.15999 Y65.06754 G01 X-33.15999 Y65.06292 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07641 Y63.29002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07641 Y63.29002 G01 X-37.09343 Y63.26056 G01 X-37.20514 Y63.11494 G01 X-37.33491 Y62.98520 G01 X-37.48050 Y62.87349 G01 X-37.63945 Y62.78172 G01 X-37.80897 Y62.71149 G01 X-37.98627 Y62.66399 G01 X-38.00996 Y62.66087 G01 X-38.00996 Y62.66427 G01 X-37.94877 Y62.67646 G01 X-37.76120 Y62.73336 G01 X-37.68875 Y62.76336 G01 X-37.51586 Y62.85579 G01 X-37.45066 Y62.89935 G01 X-37.29912 Y63.02371 G01 X-37.24367 Y63.07915 G01 X-37.11931 Y63.23069 G01 X-37.07966 Y63.29002 G01 X-37.07641 Y63.29002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07641 Y64.79005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07641 Y64.79005 G01 X-37.09343 Y64.81951 G01 X-37.20514 Y64.96508 G01 X-37.33491 Y65.09485 G01 X-37.48050 Y65.20658 G01 X-37.63943 Y65.29833 G01 X-37.80900 Y65.36856 G01 X-37.98627 Y65.41608 G01 X-38.00996 Y65.41920 G01 X-38.00996 Y65.41575 G01 X-37.94877 Y65.40358 G01 X-37.76120 Y65.34666 G01 X-37.68875 Y65.31667 G01 X-37.51586 Y65.22426 G01 X-37.45066 Y65.18070 G01 X-37.29912 Y65.05632 G01 X-37.24367 Y65.00087 G01 X-37.11931 Y64.84933 G01 X-37.07969 Y64.79005 G01 X-37.07641 Y64.79005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50999 Y62.66084 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50999 Y62.66084 G01 X-39.50999 Y62.66427 G01 X-39.57120 Y62.67646 G01 X-39.75878 Y62.73336 G01 X-39.83122 Y62.76336 G01 X-40.00412 Y62.85579 G01 X-40.06932 Y62.89935 G01 X-40.22086 Y63.02371 G01 X-40.27630 Y63.07915 G01 X-40.40066 Y63.23069 G01 X-40.44031 Y63.29002 G01 X-40.44354 Y63.29002 G01 X-40.42652 Y63.26056 G01 X-40.31481 Y63.11494 G01 X-40.18504 Y62.98520 G01 X-40.03945 Y62.87349 G01 X-39.88050 Y62.78172 G01 X-39.71093 Y62.71149 G01 X-39.53366 Y62.66397 G01 X-39.50999 Y62.66084 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50999 Y65.41575 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50999 Y65.41575 G01 X-39.50999 Y65.41920 G01 X-39.53366 Y65.41608 G01 X-39.71093 Y65.36856 G01 X-39.88052 Y65.29833 G01 X-40.03945 Y65.20658 G01 X-40.18504 Y65.09485 G01 X-40.31481 Y64.96508 G01 X-40.42652 Y64.81951 G01 X-40.44354 Y64.79005 G01 X-40.44029 Y64.79005 G01 X-40.40066 Y64.84933 G01 X-40.27630 Y65.00087 G01 X-40.22086 Y65.05632 G01 X-40.06932 Y65.18070 G01 X-40.00412 Y65.22426 G01 X-39.83122 Y65.31667 G01 X-39.75878 Y65.34666 G01 X-39.57120 Y65.40358 G01 X-39.50999 Y65.41575 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.72498 Y69.99484 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.72498 Y69.99484 G01 X-37.72670 Y69.95783 G01 X-37.73013 Y69.92095 G01 X-37.74103 Y69.85834 G01 X-37.76168 Y69.79824 G01 X-37.79704 Y69.71706 G01 X-37.84174 Y69.63952 G01 X-37.90257 Y69.57383 G01 X-37.96965 Y69.51600 G01 X-38.04369 Y69.46545 G01 X-47.79216 Y64.30450 G01 X-48.51998 Y63.91918 G01 X-48.51998 Y0.72452 G01 X-48.52249 Y0.67986 G01 X-48.52747 Y0.63557 G01 X-48.54060 Y0.56953 G01 X-48.56460 Y0.50663 G01 X-48.60303 Y0.42685 G01 X-48.65068 Y0.35103 G01 X-48.71401 Y0.28771 G01 X-48.78325 Y0.23249 G01 X-48.85907 Y0.18484 G01 X-48.94360 Y0.15528 G01 X-49.02993 Y0.13557 G01 X-49.11898 Y0.12551 G01 X-60.20187 Y0.12551 G01 X-60.22417 Y0.12614 G01 X-60.24644 Y0.12739 G01 X-60.35627 Y0.14923 G01 X-60.43987 Y0.17849 G01 X-60.52059 Y0.21738 G01 X-60.59061 Y0.27323 G01 X-60.65323 Y0.33587 G01 X-60.70903 Y0.40587 G01 X-60.74787 Y0.48652 G01 X-60.76420 Y0.53313 G01 X-60.77713 Y0.57011 G01 X-60.79707 Y0.65741 G01 X-60.79709 Y0.74699 G01 X-60.78718 Y0.83501 G01 X-60.76725 Y0.92238 G01 X-60.72836 Y1.00310 G01 X-60.68124 Y1.07806 G01 X-60.62541 Y1.14809 G01 X-57.26522 Y4.50825 G01 X-57.09715 Y4.71902 G01 X-56.95369 Y4.94734 G01 X-56.83672 Y5.19027 G01 X-56.74767 Y5.44472 G01 X-56.68765 Y5.70764 G01 X-56.65748 Y5.97553 G01 X-56.65748 Y14.64483 G01 X-56.68765 Y14.91275 G01 X-56.74767 Y15.17562 G01 X-56.83670 Y15.43007 G01 X-56.95369 Y15.67303 G01 X-57.09712 Y15.90132 G01 X-57.26522 Y16.11209 G01 X-57.45590 Y16.30277 G01 X-57.49380 Y16.33299 G01 X-57.55712 Y16.39632 G01 X-57.61234 Y16.46556 G01 X-57.65999 Y16.54140 G01 X-57.68958 Y16.62593 G01 X-57.70929 Y16.71229 G01 X-57.71932 Y16.80132 G01 X-57.70926 Y16.89035 G01 X-57.68955 Y16.97668 G01 X-57.65999 Y17.06121 G01 X-57.61234 Y17.13703 G01 X-57.55712 Y17.20627 G01 X-57.49387 Y17.26952 G01 X-57.47795 Y17.28227 G01 X-57.47518 Y17.28501 G01 X-57.46230 Y17.29733 G01 X-57.44950 Y17.30904 G01 X-57.43667 Y17.32029 G01 X-57.42986 Y17.32598 G01 X-57.36385 Y17.39598 G01 X-57.35920 Y17.40081 G01 X-57.35516 Y17.40495 G01 X-57.35171 Y17.40846 G01 X-57.26720 Y17.49299 G01 X-57.25468 Y17.50868 G01 X-57.24416 Y17.52133 G01 X-57.24282 Y17.52286 G01 X-57.24119 Y17.52507 G01 X-57.23751 Y17.52989 G01 X-57.23347 Y17.53515 G01 X-57.22900 Y17.54092 G01 X-57.09913 Y17.70373 G01 X-56.95567 Y17.93203 G01 X-56.83870 Y18.17495 G01 X-56.74965 Y18.42943 G01 X-56.68966 Y18.69227 G01 X-56.65948 Y18.96022 G01 X-56.65948 Y31.15483 G01 X-56.68966 Y31.42278 G01 X-56.74965 Y31.68562 G01 X-56.83868 Y31.94007 G01 X-56.88501 Y32.03621 G01 X-56.95570 Y32.18303 G01 X-57.09913 Y32.41132 G01 X-57.26723 Y32.62209 G01 X-57.45791 Y32.81277 G01 X-57.49481 Y32.84221 G01 X-57.55813 Y32.90553 G01 X-57.61335 Y32.97477 G01 X-57.66100 Y33.05059 G01 X-57.69057 Y33.13512 G01 X-57.71028 Y33.22145 G01 X-57.72034 Y33.31048 G01 X-57.71031 Y33.39951 G01 X-57.69059 Y33.48587 G01 X-57.66100 Y33.57040 G01 X-57.61335 Y33.64624 G01 X-57.55813 Y33.71548 G01 X-57.49463 Y33.77896 G01 X-57.47792 Y33.79227 G01 X-57.47538 Y33.79481 G01 X-57.46263 Y33.80703 G01 X-57.44983 Y33.81876 G01 X-57.43614 Y33.83032 G01 X-57.43634 Y33.83057 G01 X-57.42984 Y33.83603 G01 X-57.36385 Y33.90598 G01 X-57.35923 Y33.91078 G01 X-57.35521 Y33.91490 G01 X-57.35171 Y33.91846 G01 X-57.26522 Y34.00494 G01 X-57.25214 Y34.02135 G01 X-57.24472 Y34.03029 G01 X-57.24282 Y34.03281 G01 X-57.23880 Y34.03801 G01 X-57.23469 Y34.04325 G01 X-57.09712 Y34.21574 G01 X-56.95369 Y34.44403 G01 X-56.83672 Y34.68693 G01 X-56.74767 Y34.94144 G01 X-56.68765 Y35.20430 G01 X-56.65748 Y35.47222 G01 X-56.65748 Y47.66483 G01 X-56.68765 Y47.93275 G01 X-56.74767 Y48.19562 G01 X-56.83670 Y48.45007 G01 X-56.95369 Y48.69303 G01 X-57.09712 Y48.92132 G01 X-57.26522 Y49.13209 G01 X-57.45590 Y49.32277 G01 X-57.49380 Y49.35299 G01 X-57.55712 Y49.41632 G01 X-57.61234 Y49.48556 G01 X-57.65999 Y49.56140 G01 X-57.68958 Y49.64593 G01 X-57.70929 Y49.73229 G01 X-57.71932 Y49.82132 G01 X-57.70926 Y49.91035 G01 X-57.68955 Y49.99668 G01 X-57.65999 Y50.08121 G01 X-57.61234 Y50.15703 G01 X-57.55712 Y50.22627 G01 X-57.49387 Y50.28952 G01 X-57.47795 Y50.30227 G01 X-57.47518 Y50.30501 G01 X-57.46230 Y50.31733 G01 X-57.44950 Y50.32904 G01 X-57.43667 Y50.34029 G01 X-57.42986 Y50.34598 G01 X-57.36385 Y50.41598 G01 X-57.35920 Y50.42081 G01 X-57.35516 Y50.42495 G01 X-57.35171 Y50.42846 G01 X-57.26720 Y50.51299 G01 X-57.25468 Y50.52868 G01 X-57.24416 Y50.54133 G01 X-57.24282 Y50.54286 G01 X-57.24119 Y50.54507 G01 X-57.23751 Y50.54989 G01 X-57.23347 Y50.55515 G01 X-57.22900 Y50.56092 G01 X-57.09913 Y50.72373 G01 X-56.95567 Y50.95203 G01 X-56.83870 Y51.19495 G01 X-56.74965 Y51.44943 G01 X-56.68966 Y51.71227 G01 X-56.65948 Y51.98022 G01 X-56.65948 Y64.17483 G01 X-56.68966 Y64.44278 G01 X-56.74965 Y64.70562 G01 X-56.83870 Y64.96007 G01 X-56.88610 Y65.05855 G01 X-56.95567 Y65.20303 G01 X-57.09913 Y65.43132 G01 X-57.26723 Y65.64209 G01 X-57.45791 Y65.83277 G01 X-57.66867 Y66.00086 G01 X-57.89697 Y66.14432 G01 X-58.13987 Y66.26129 G01 X-58.39438 Y66.35034 G01 X-58.65724 Y66.41034 G01 X-58.88335 Y66.43581 G01 X-58.92514 Y66.44051 G01 X-59.19476 Y66.44051 G01 X-59.25310 Y66.43396 G01 X-59.46273 Y66.41034 G01 X-59.72557 Y66.35034 G01 X-59.98005 Y66.26129 G01 X-60.22297 Y66.14432 G01 X-60.45124 Y66.00086 G01 X-60.48967 Y65.97021 G01 X-60.66206 Y65.83274 G01 X-60.73697 Y65.75786 G01 X-60.75305 Y65.74265 G01 X-60.76968 Y65.72776 G01 X-60.86285 Y65.66548 G01 X-60.94266 Y65.62705 G01 X-61.02719 Y65.59746 G01 X-61.11622 Y65.58743 G01 X-61.20476 Y65.58743 G01 X-61.29376 Y65.59746 G01 X-61.37829 Y65.62705 G01 X-61.40771 Y65.64120 G01 X-61.45810 Y65.66548 G01 X-61.53394 Y65.71313 G01 X-61.59729 Y65.77648 G01 X-61.65251 Y65.84572 G01 X-61.70016 Y65.92154 G01 X-61.72973 Y66.00607 G01 X-61.74944 Y66.09241 G01 X-61.75950 Y66.18143 G01 X-61.75950 Y71.91482 G01 X-61.78967 Y72.18277 G01 X-61.84967 Y72.44563 G01 X-61.93872 Y72.70011 G01 X-61.99493 Y72.81685 G01 X-62.05569 Y72.94302 G01 X-62.19915 Y73.17134 G01 X-62.36724 Y73.38213 G01 X-62.55787 Y73.57276 G01 X-62.76869 Y73.74085 G01 X-62.99696 Y73.88431 G01 X-63.23989 Y74.00128 G01 X-63.49437 Y74.09033 G01 X-63.69434 Y74.13598 G01 X-63.75723 Y74.15033 G01 X-63.98334 Y74.17580 G01 X-64.02515 Y74.18050 G01 X-69.37482 Y74.18050 G01 X-69.43317 Y74.17395 G01 X-69.64269 Y74.15035 G01 X-69.84269 Y74.10468 G01 X-69.90558 Y74.09033 G01 X-70.16001 Y74.00128 G01 X-70.40296 Y73.88431 G01 X-70.60385 Y73.75808 G01 X-70.68457 Y73.71921 G01 X-70.76814 Y73.68998 G01 X-70.80517 Y73.68155 G01 X-70.91485 Y73.64314 G01 X-70.99128 Y73.59513 G01 X-71.05506 Y73.53133 G01 X-71.10312 Y73.45488 G01 X-71.14149 Y73.34522 G01 X-71.14990 Y73.30827 G01 X-71.17914 Y73.22468 G01 X-71.21810 Y73.14380 G01 X-71.30842 Y73.00006 G01 X-71.33309 Y72.96082 G01 X-71.34538 Y72.94241 G01 X-71.35828 Y72.92419 G01 X-71.43527 Y72.84271 G01 X-71.50451 Y72.78749 G01 X-71.58036 Y72.73984 G01 X-71.66489 Y72.71025 G01 X-71.75125 Y72.69054 G01 X-71.84027 Y72.68051 G01 X-75.02584 Y72.68051 G01 X-75.16585 Y72.65836 G01 X-75.23813 Y72.63486 G01 X-75.29716 Y72.62051 G01 X-75.35472 Y72.61109 G01 X-75.38848 Y72.60702 G01 X-75.39071 Y72.60687 G01 X-75.46963 Y72.59796 G01 X-75.55485 Y72.56814 G01 X-75.63128 Y72.52013 G01 X-75.69508 Y72.45633 G01 X-75.74309 Y72.37990 G01 X-75.77291 Y72.29471 G01 X-75.78101 Y72.22275 G01 X-75.78268 Y72.20565 G01 X-75.78731 Y72.18206 G01 X-75.78601 Y72.18185 G01 X-75.79513 Y72.12427 G01 X-75.80981 Y72.06318 G01 X-75.83331 Y71.99090 G01 X-75.85546 Y71.85092 G01 X-75.85546 Y71.70913 G01 X-75.83331 Y71.56915 G01 X-75.80981 Y71.49687 G01 X-75.79546 Y71.43784 G01 X-75.78604 Y71.38028 G01 X-75.78197 Y71.34652 G01 X-75.78182 Y71.34429 G01 X-75.77291 Y71.26537 G01 X-75.74309 Y71.18015 G01 X-75.69508 Y71.10372 G01 X-75.63128 Y71.03992 G01 X-75.55485 Y70.99191 G01 X-75.47006 Y70.96225 G01 X-75.37545 Y70.95178 G01 X-75.35698 Y70.94792 G01 X-75.35680 Y70.94899 G01 X-75.29922 Y70.93987 G01 X-75.23813 Y70.92519 G01 X-75.16585 Y70.90169 G01 X-75.02587 Y70.87954 G01 X-71.84027 Y70.87954 G01 X-71.81752 Y70.87888 G01 X-71.79521 Y70.87761 G01 X-71.68592 Y70.85585 G01 X-71.60233 Y70.82661 G01 X-71.52156 Y70.78772 G01 X-71.45148 Y70.73182 G01 X-71.38887 Y70.66918 G01 X-71.33306 Y70.59920 G01 X-71.24436 Y70.45801 G01 X-71.21810 Y70.41625 G01 X-71.17914 Y70.33537 G01 X-71.14990 Y70.25178 G01 X-71.14149 Y70.21483 G01 X-71.10309 Y70.10515 G01 X-71.05508 Y70.02872 G01 X-70.99128 Y69.96492 G01 X-70.91485 Y69.91691 G01 X-70.80517 Y69.87851 G01 X-70.76814 Y69.87007 G01 X-70.68457 Y69.84084 G01 X-70.60385 Y69.80197 G01 X-70.40296 Y69.67574 G01 X-70.25443 Y69.60421 G01 X-70.17858 Y69.55656 G01 X-70.10934 Y69.50134 G01 X-70.04599 Y69.43799 G01 X-69.99834 Y69.36215 G01 X-69.95991 Y69.28234 G01 X-69.93032 Y69.19781 G01 X-69.92029 Y69.10878 G01 X-69.92029 Y69.02024 G01 X-69.93032 Y68.93124 G01 X-69.95991 Y68.84671 G01 X-69.97406 Y68.81729 G01 X-69.99834 Y68.76690 G01 X-70.04599 Y68.69106 G01 X-70.10934 Y68.62771 G01 X-70.17858 Y68.57249 G01 X-70.25443 Y68.52484 G01 X-70.33896 Y68.49525 G01 X-70.42532 Y68.47554 G01 X-70.51434 Y68.46550 G01 X-73.18477 Y68.46550 G01 X-73.45272 Y68.43533 G01 X-73.71556 Y68.37533 G01 X-73.97006 Y68.28628 G01 X-74.21296 Y68.16931 G01 X-74.44126 Y68.02588 G01 X-74.65205 Y67.85776 G01 X-79.92271 Y62.58710 G01 X-80.09083 Y62.37631 G01 X-80.23426 Y62.14802 G01 X-80.35123 Y61.90511 G01 X-80.44028 Y61.65061 G01 X-80.50028 Y61.38777 G01 X-80.53045 Y61.11982 G01 X-80.53045 Y60.85023 G01 X-80.50028 Y60.58228 G01 X-80.44028 Y60.31944 G01 X-80.35123 Y60.06494 G01 X-80.23426 Y59.82204 G01 X-80.09083 Y59.59374 G01 X-79.92271 Y59.38295 G01 X-79.73205 Y59.19229 G01 X-79.52126 Y59.02417 G01 X-79.29296 Y58.88074 G01 X-79.05006 Y58.76377 G01 X-78.79556 Y58.67472 G01 X-78.53272 Y58.61472 G01 X-78.26477 Y58.58455 G01 X-77.99518 Y58.58455 G01 X-77.72723 Y58.61472 G01 X-77.46439 Y58.67472 G01 X-77.20988 Y58.76377 G01 X-76.96698 Y58.88074 G01 X-76.73869 Y59.02417 G01 X-76.52790 Y59.19229 G01 X-72.23110 Y63.48908 G01 X-72.17972 Y63.53247 G01 X-72.12534 Y63.57105 G01 X-72.05727 Y63.60994 G01 X-71.98292 Y63.63478 G01 X-71.89659 Y63.65449 G01 X-71.80756 Y63.66455 G01 X-67.09949 Y63.66455 G01 X-67.05458 Y63.66201 G01 X-67.01029 Y63.65700 G01 X-66.94437 Y63.64387 G01 X-66.88158 Y63.61989 G01 X-66.80180 Y63.58146 G01 X-66.72598 Y63.53381 G01 X-66.66266 Y63.47049 G01 X-66.60744 Y63.40125 G01 X-66.55979 Y63.32543 G01 X-66.53023 Y63.24090 G01 X-66.51052 Y63.15457 G01 X-66.50046 Y63.06551 G01 X-66.50046 Y54.84861 G01 X-66.50338 Y54.80043 G01 X-66.50914 Y54.75293 G01 X-66.52329 Y54.68560 G01 X-66.54877 Y54.62164 G01 X-66.58849 Y54.54252 G01 X-66.63739 Y54.46749 G01 X-66.70175 Y54.40521 G01 X-66.77191 Y54.35113 G01 X-66.84856 Y54.30470 G01 X-66.93363 Y54.27653 G01 X-67.02029 Y54.25827 G01 X-67.10714 Y54.24968 G01 X-67.19378 Y54.26017 G01 X-67.27455 Y54.27904 G01 X-67.32474 Y54.29568 G01 X-67.32507 Y54.29474 G01 X-67.33782 Y54.29939 G01 X-67.35700 Y54.30691 G01 X-67.37523 Y54.31463 G01 X-67.37592 Y54.31491 G01 X-67.48956 Y54.35466 G01 X-67.49251 Y54.35570 G01 X-67.49484 Y54.35654 G01 X-67.49654 Y54.35717 G01 X-67.61493 Y54.40025 G01 X-67.62517 Y54.40325 G01 X-67.75380 Y54.43261 G01 X-67.75674 Y54.43327 G01 X-67.88806 Y54.46434 G01 X-68.02517 Y54.47973 G01 X-68.02763 Y54.48006 G01 X-68.16014 Y54.49550 G01 X-68.43977 Y54.49550 G01 X-68.57315 Y54.47993 G01 X-68.57482 Y54.47973 G01 X-68.71254 Y54.46424 G01 X-68.84132 Y54.43370 G01 X-68.84579 Y54.43269 G01 X-68.97678 Y54.40264 G01 X-68.98498 Y54.40025 G01 X-69.10335 Y54.35717 G01 X-69.10508 Y54.35654 G01 X-69.10741 Y54.35570 G01 X-69.22415 Y54.31488 G01 X-69.22461 Y54.31466 G01 X-69.24290 Y54.30696 G01 X-69.24998 Y54.30414 G01 X-69.35494 Y54.25141 G01 X-69.35930 Y54.24928 G01 X-69.36228 Y54.24780 G01 X-69.36388 Y54.24704 G01 X-69.46512 Y54.19827 G01 X-69.47228 Y54.19401 G01 X-69.48884 Y54.18471 G01 X-69.50149 Y54.17795 G01 X-69.59306 Y54.11773 G01 X-69.59618 Y54.11572 G01 X-69.59961 Y54.11349 G01 X-69.60335 Y54.11112 G01 X-69.63291 Y54.09256 G01 X-69.69179 Y54.05552 G01 X-69.70393 Y54.04630 G01 X-69.71864 Y54.03564 G01 X-69.73352 Y54.02535 G01 X-69.73581 Y54.02383 G01 X-69.81440 Y53.95791 G01 X-69.81785 Y53.95504 G01 X-69.82166 Y53.95192 G01 X-69.82593 Y53.94846 G01 X-69.90197 Y53.88783 G01 X-69.90457 Y53.88524 G01 X-69.91765 Y53.87272 G01 X-69.93045 Y53.86101 G01 X-69.94328 Y53.84976 G01 X-69.95008 Y53.84407 G01 X-70.01610 Y53.77407 G01 X-70.02075 Y53.76924 G01 X-70.02478 Y53.76510 G01 X-70.02826 Y53.76157 G01 X-74.00118 Y49.78865 G01 X-74.20771 Y49.58210 G01 X-74.37583 Y49.37131 G01 X-74.49996 Y49.17375 G01 X-74.51926 Y49.14301 G01 X-74.63623 Y48.90011 G01 X-74.72531 Y48.64558 G01 X-74.73316 Y48.61116 G01 X-74.76272 Y48.52671 G01 X-74.80115 Y48.44690 G01 X-74.84880 Y48.37106 G01 X-74.91215 Y48.30771 G01 X-74.98139 Y48.25249 G01 X-75.05721 Y48.20484 G01 X-75.14174 Y48.17527 G01 X-75.22808 Y48.15556 G01 X-75.31713 Y48.14550 G01 X-87.04756 Y48.14550 G01 X-87.11461 Y48.15117 G01 X-87.18032 Y48.16234 G01 X-87.25592 Y48.18299 G01 X-87.32602 Y48.21797 G01 X-87.40103 Y48.26509 G01 X-87.47110 Y48.32097 G01 X-91.13289 Y51.98276 G01 X-91.34369 Y52.15085 G01 X-91.57196 Y52.29431 G01 X-91.81489 Y52.41128 G01 X-92.06937 Y52.50033 G01 X-92.26934 Y52.54598 G01 X-92.33223 Y52.56033 G01 X-92.55834 Y52.58580 G01 X-92.60015 Y52.59050 G01 X-95.29949 Y52.59050 G01 X-95.34439 Y52.59304 G01 X-95.38866 Y52.59805 G01 X-95.45455 Y52.61118 G01 X-95.51729 Y52.63513 G01 X-95.59710 Y52.67356 G01 X-95.67294 Y52.72121 G01 X-95.73629 Y52.78456 G01 X-95.79151 Y52.85380 G01 X-95.83916 Y52.92962 G01 X-95.86872 Y53.01415 G01 X-95.88844 Y53.10048 G01 X-95.89849 Y53.18951 G01 X-95.89849 Y56.48392 G01 X-95.92064 Y56.62390 G01 X-95.94414 Y56.69618 G01 X-95.95846 Y56.75521 G01 X-95.96791 Y56.81277 G01 X-95.97198 Y56.84653 G01 X-95.97213 Y56.84876 G01 X-95.98102 Y56.92768 G01 X-96.01086 Y57.01290 G01 X-96.05884 Y57.08933 G01 X-96.12267 Y57.15313 G01 X-96.19908 Y57.20114 G01 X-96.28389 Y57.23080 G01 X-96.37850 Y57.24127 G01 X-96.39694 Y57.24513 G01 X-96.39712 Y57.24406 G01 X-96.45470 Y57.25318 G01 X-96.51582 Y57.26786 G01 X-96.58813 Y57.29136 G01 X-96.69814 Y57.30878 G01 X-96.72806 Y57.31351 G01 X-96.86984 Y57.31351 G01 X-97.00985 Y57.29136 G01 X-97.08211 Y57.26786 G01 X-97.14114 Y57.25351 G01 X-97.19872 Y57.24409 G01 X-97.23248 Y57.24002 G01 X-97.23471 Y57.23987 G01 X-97.31363 Y57.23096 G01 X-97.39885 Y57.20114 G01 X-97.47525 Y57.15313 G01 X-97.53908 Y57.08933 G01 X-97.58709 Y57.01290 G01 X-97.61675 Y56.92811 G01 X-97.62722 Y56.83350 G01 X-97.63108 Y56.81503 G01 X-97.63001 Y56.81485 G01 X-97.63913 Y56.75727 G01 X-97.65381 Y56.69618 G01 X-97.67728 Y56.62387 G01 X-97.67921 Y56.61188 G01 X-97.69946 Y56.48392 G01 X-97.69946 Y52.62815 G01 X-97.70951 Y52.53912 G01 X-97.72922 Y52.45278 G01 X-97.75879 Y52.36825 G01 X-97.80641 Y52.29243 G01 X-97.86163 Y52.22319 G01 X-97.92498 Y52.15987 G01 X-98.14705 Y51.98276 G01 X-98.33771 Y51.79210 G01 X-98.50583 Y51.58131 G01 X-98.64924 Y51.35302 G01 X-98.76623 Y51.11011 G01 X-98.85528 Y50.85561 G01 X-98.91528 Y50.59277 G01 X-98.94543 Y50.32482 G01 X-98.94543 Y50.05523 G01 X-98.91528 Y49.78728 G01 X-98.85528 Y49.52444 G01 X-98.76623 Y49.26994 G01 X-98.64924 Y49.02704 G01 X-98.50583 Y48.79874 G01 X-98.33771 Y48.58795 G01 X-98.14705 Y48.39729 G01 X-97.93626 Y48.22917 G01 X-97.82173 Y48.15721 G01 X-97.78503 Y48.13118 G01 X-97.75020 Y48.10339 G01 X-97.70139 Y48.05724 G01 X-97.66100 Y48.00354 G01 X-97.61391 Y47.92856 G01 X-97.57502 Y47.84789 G01 X-97.55511 Y47.76059 G01 X-97.54518 Y47.67258 G01 X-97.54512 Y47.58297 G01 X-97.56511 Y47.49559 G01 X-97.59438 Y47.41200 G01 X-97.63321 Y47.33131 G01 X-97.68907 Y47.26130 G01 X-97.75168 Y47.19869 G01 X-97.82171 Y47.14286 G01 X-97.90885 Y47.08810 G01 X-97.98957 Y47.04921 G01 X-98.07314 Y47.01998 G01 X-98.11015 Y47.01155 G01 X-98.21985 Y46.97314 G01 X-98.29625 Y46.92513 G01 X-98.36003 Y46.86133 G01 X-98.40809 Y46.78488 G01 X-98.44649 Y46.67522 G01 X-98.45490 Y46.63827 G01 X-98.48411 Y46.55468 G01 X-98.52300 Y46.47390 G01 X-98.64924 Y46.27302 G01 X-98.76623 Y46.03011 G01 X-98.85528 Y45.77561 G01 X-98.91528 Y45.51277 G01 X-98.94543 Y45.24482 G01 X-98.94543 Y44.97523 G01 X-98.91528 Y44.70728 G01 X-98.85528 Y44.44444 G01 X-98.76623 Y44.18994 G01 X-98.64924 Y43.94704 G01 X-98.52300 Y43.74615 G01 X-98.48411 Y43.66537 G01 X-98.45490 Y43.58178 G01 X-98.44649 Y43.54483 G01 X-98.40809 Y43.43515 G01 X-98.36008 Y43.35872 G01 X-98.29625 Y43.29492 G01 X-98.21988 Y43.24691 G01 X-98.12866 Y43.21501 G01 X-98.04794 Y43.17612 G01 X-97.97296 Y43.12900 G01 X-97.90293 Y43.07317 G01 X-96.44518 Y41.61542 G01 X-96.41531 Y41.58197 G01 X-96.38752 Y41.54712 G01 X-96.35016 Y41.49124 G01 X-96.32272 Y41.42987 G01 X-96.29346 Y41.34628 G01 X-96.27352 Y41.25895 G01 X-96.27347 Y41.16939 G01 X-96.28341 Y41.08141 G01 X-96.30332 Y40.99403 G01 X-96.34221 Y40.91328 G01 X-96.38935 Y40.83828 G01 X-96.44518 Y40.76830 G01 X-97.12605 Y40.08745 G01 X-97.19605 Y40.03163 G01 X-97.27106 Y39.98451 G01 X-97.35170 Y39.94565 G01 X-97.39882 Y39.92916 G01 X-97.42684 Y39.91153 G01 X-97.47525 Y39.88113 G01 X-97.53908 Y39.81733 G01 X-97.58709 Y39.74090 G01 X-97.61691 Y39.65571 G01 X-97.62465 Y39.58692 G01 X-97.62676 Y39.56576 G01 X-97.63128 Y39.54306 G01 X-97.63001 Y39.54285 G01 X-97.63913 Y39.48527 G01 X-97.65381 Y39.42418 G01 X-97.67728 Y39.35190 G01 X-97.69946 Y39.21192 G01 X-97.69946 Y39.07013 G01 X-97.67728 Y38.93015 G01 X-97.65381 Y38.85787 G01 X-97.63946 Y38.79884 G01 X-97.63001 Y38.74128 G01 X-97.62597 Y38.70752 G01 X-97.62580 Y38.70529 G01 X-97.61691 Y38.62637 G01 X-97.58709 Y38.54115 G01 X-97.53908 Y38.46472 G01 X-97.47525 Y38.40092 G01 X-97.39885 Y38.35291 G01 X-97.31404 Y38.32325 G01 X-97.21945 Y38.31278 G01 X-97.20098 Y38.30892 G01 X-97.20080 Y38.30999 G01 X-97.14322 Y38.30087 G01 X-97.08211 Y38.28619 G01 X-97.00985 Y38.26269 G01 X-96.86984 Y38.24054 G01 X-96.72808 Y38.24054 G01 X-96.58810 Y38.26269 G01 X-96.51582 Y38.28619 G01 X-96.45679 Y38.30054 G01 X-96.39923 Y38.30996 G01 X-96.36547 Y38.31403 G01 X-96.36324 Y38.31418 G01 X-96.28432 Y38.32309 G01 X-96.19908 Y38.35291 G01 X-96.12267 Y38.40092 G01 X-96.05884 Y38.46472 G01 X-96.01084 Y38.54118 G01 X-95.99435 Y38.58830 G01 X-95.95549 Y38.66894 G01 X-95.90837 Y38.74392 G01 X-95.85255 Y38.81395 G01 X-95.17170 Y39.49480 G01 X-95.13825 Y39.52469 G01 X-95.10340 Y39.55248 G01 X-95.04752 Y39.58982 G01 X-94.98615 Y39.61728 G01 X-94.90256 Y39.64654 G01 X-94.81526 Y39.66648 G01 X-94.72567 Y39.66650 G01 X-94.63766 Y39.65659 G01 X-94.55031 Y39.63666 G01 X-94.46959 Y39.59777 G01 X-94.39461 Y39.55065 G01 X-94.32458 Y39.49482 G01 X-93.70205 Y38.87229 G01 X-93.49126 Y38.70417 G01 X-93.26296 Y38.56074 G01 X-93.02006 Y38.44377 G01 X-92.76556 Y38.35472 G01 X-92.50272 Y38.29472 G01 X-92.23477 Y38.26455 G01 X-90.27445 Y38.26455 G01 X-90.25609 Y38.26412 G01 X-90.23782 Y38.26328 G01 X-90.13168 Y38.24382 G01 X-90.04753 Y38.21626 G01 X-89.96617 Y38.17910 G01 X-89.89510 Y38.12477 G01 X-89.83120 Y38.06346 G01 X-89.77387 Y37.99452 G01 X-89.73333 Y37.91456 G01 X-89.70239 Y37.83158 G01 X-89.68070 Y37.74474 G01 X-89.67887 Y37.65525 G01 X-89.68697 Y37.56706 G01 X-89.70511 Y37.47928 G01 X-89.74235 Y37.39777 G01 X-89.78794 Y37.32183 G01 X-89.84232 Y37.25068 G01 X-89.91121 Y37.19343 G01 X-89.98522 Y37.14479 G01 X-90.06510 Y37.10428 G01 X-90.22634 Y37.04415 G01 X-90.42721 Y36.93448 G01 X-90.61042 Y36.79732 G01 X-90.77227 Y36.63547 G01 X-90.90943 Y36.45226 G01 X-90.91882 Y36.43504 G01 X-90.91331 Y36.43504 G01 X-90.91052 Y36.44024 G01 X-90.86696 Y36.50545 G01 X-90.71773 Y36.68731 G01 X-90.66228 Y36.74276 G01 X-90.48042 Y36.89198 G01 X-90.41522 Y36.93554 G01 X-90.20778 Y37.04644 G01 X-90.13531 Y37.07644 G01 X-89.91022 Y37.14474 G01 X-89.83330 Y37.16003 G01 X-89.59919 Y37.18309 G01 X-89.52078 Y37.18309 G01 X-89.28667 Y37.16003 G01 X-89.20976 Y37.14474 G01 X-88.98466 Y37.07644 G01 X-88.91220 Y37.04644 G01 X-88.70476 Y36.93554 G01 X-88.63955 Y36.89198 G01 X-88.45769 Y36.74276 G01 X-88.40224 Y36.68731 G01 X-88.25302 Y36.50545 G01 X-88.20946 Y36.44024 G01 X-88.20666 Y36.43504 G01 X-88.20113 Y36.43504 G01 X-88.21052 Y36.45226 G01 X-88.34768 Y36.63547 G01 X-88.50953 Y36.79732 G01 X-88.69274 Y36.93448 G01 X-88.89361 Y37.04415 G01 X-89.05484 Y37.10428 G01 X-89.07181 Y37.11106 G01 X-89.08863 Y37.11822 G01 X-89.18126 Y37.17349 G01 X-89.25050 Y37.22871 G01 X-89.31385 Y37.29206 G01 X-89.36150 Y37.36790 G01 X-89.39993 Y37.44771 G01 X-89.42952 Y37.53224 G01 X-89.43955 Y37.62124 G01 X-89.43955 Y37.70979 G01 X-89.42952 Y37.79881 G01 X-89.39993 Y37.88334 G01 X-89.38578 Y37.91276 G01 X-89.36150 Y37.96315 G01 X-89.31385 Y38.03900 G01 X-89.25050 Y38.10234 G01 X-89.18126 Y38.15756 G01 X-89.10542 Y38.20521 G01 X-89.02088 Y38.23480 G01 X-88.93452 Y38.25451 G01 X-88.84552 Y38.26455 G01 X-80.29141 Y38.26455 G01 X-80.26863 Y38.26389 G01 X-80.24635 Y38.26262 G01 X-80.13708 Y38.24085 G01 X-80.05349 Y38.21161 G01 X-79.97272 Y38.17273 G01 X-79.90264 Y38.11682 G01 X-79.84003 Y38.05418 G01 X-79.78423 Y37.98418 G01 X-79.74539 Y37.90354 G01 X-79.71613 Y37.81995 G01 X-79.71450 Y37.81281 G01 X-79.69619 Y37.73265 G01 X-79.69616 Y37.64306 G01 X-79.70607 Y37.55505 G01 X-79.72601 Y37.46770 G01 X-79.76490 Y37.38698 G01 X-79.81201 Y37.31200 G01 X-79.86784 Y37.24197 G01 X-79.92271 Y37.18710 G01 X-80.09083 Y36.97631 G01 X-80.23426 Y36.74802 G01 X-80.35123 Y36.50511 G01 X-80.44028 Y36.25061 G01 X-80.50028 Y35.98777 G01 X-80.53045 Y35.71982 G01 X-80.53045 Y35.45023 G01 X-80.50028 Y35.18228 G01 X-80.44028 Y34.91944 G01 X-80.35123 Y34.66494 G01 X-80.23426 Y34.42204 G01 X-80.09083 Y34.19374 G01 X-79.92271 Y33.98295 G01 X-74.65205 Y28.71229 G01 X-74.44126 Y28.54417 G01 X-74.21296 Y28.40074 G01 X-73.97006 Y28.28377 G01 X-73.71556 Y28.19472 G01 X-73.45272 Y28.13472 G01 X-73.18477 Y28.10455 G01 X-67.09949 Y28.10455 G01 X-67.05458 Y28.10201 G01 X-67.01029 Y28.09700 G01 X-66.94437 Y28.08387 G01 X-66.88158 Y28.05989 G01 X-66.80180 Y28.02146 G01 X-66.72598 Y27.97381 G01 X-66.66266 Y27.91049 G01 X-66.60744 Y27.84125 G01 X-66.55979 Y27.76543 G01 X-66.53023 Y27.68090 G01 X-66.51052 Y27.59457 G01 X-66.50046 Y27.50551 G01 X-66.50046 Y21.82861 G01 X-66.50338 Y21.78043 G01 X-66.50914 Y21.73293 G01 X-66.52329 Y21.66557 G01 X-66.54877 Y21.60164 G01 X-66.58849 Y21.52252 G01 X-66.63739 Y21.44749 G01 X-66.70175 Y21.38521 G01 X-66.77191 Y21.33113 G01 X-66.84856 Y21.28470 G01 X-66.93363 Y21.25653 G01 X-67.02029 Y21.23827 G01 X-67.10714 Y21.22968 G01 X-67.19378 Y21.24015 G01 X-67.27455 Y21.25902 G01 X-67.32474 Y21.27568 G01 X-67.32507 Y21.27474 G01 X-67.33782 Y21.27936 G01 X-67.35700 Y21.28691 G01 X-67.37523 Y21.29460 G01 X-67.37592 Y21.29491 G01 X-67.48956 Y21.33466 G01 X-67.49251 Y21.33570 G01 X-67.49484 Y21.33654 G01 X-67.49654 Y21.33717 G01 X-67.61493 Y21.38025 G01 X-67.62517 Y21.38322 G01 X-67.75380 Y21.41259 G01 X-67.75674 Y21.41327 G01 X-67.88806 Y21.44431 G01 X-68.02517 Y21.45973 G01 X-68.02763 Y21.46003 G01 X-68.16014 Y21.47550 G01 X-68.43977 Y21.47550 G01 X-68.57315 Y21.45993 G01 X-68.57482 Y21.45973 G01 X-68.71254 Y21.44424 G01 X-68.84132 Y21.41370 G01 X-68.84579 Y21.41269 G01 X-68.97678 Y21.38264 G01 X-68.98498 Y21.38025 G01 X-69.10335 Y21.33717 G01 X-69.10508 Y21.33654 G01 X-69.10741 Y21.33570 G01 X-69.22415 Y21.29486 G01 X-69.22461 Y21.29466 G01 X-69.24290 Y21.28693 G01 X-69.24998 Y21.28414 G01 X-69.35494 Y21.23141 G01 X-69.35930 Y21.22925 G01 X-69.36228 Y21.22780 G01 X-69.36388 Y21.22704 G01 X-69.46512 Y21.17827 G01 X-69.47228 Y21.17401 G01 X-69.48884 Y21.16468 G01 X-69.50149 Y21.15795 G01 X-69.59306 Y21.09773 G01 X-69.59618 Y21.09570 G01 X-69.59961 Y21.09349 G01 X-69.60335 Y21.09112 G01 X-69.63291 Y21.07253 G01 X-69.69179 Y21.03552 G01 X-69.70393 Y21.02630 G01 X-69.71864 Y21.01564 G01 X-69.73352 Y21.00535 G01 X-69.73581 Y21.00383 G01 X-69.81440 Y20.93791 G01 X-69.81785 Y20.93504 G01 X-69.82166 Y20.93192 G01 X-69.82593 Y20.92846 G01 X-69.90197 Y20.86783 G01 X-69.90457 Y20.86524 G01 X-69.91765 Y20.85272 G01 X-69.93045 Y20.84101 G01 X-69.94328 Y20.82976 G01 X-69.95008 Y20.82407 G01 X-70.01610 Y20.75407 G01 X-70.02075 Y20.74924 G01 X-70.02478 Y20.74510 G01 X-70.02826 Y20.74157 G01 X-72.92884 Y17.84097 G01 X-72.98023 Y17.79758 G01 X-73.03461 Y17.75900 G01 X-73.10268 Y17.72011 G01 X-73.17703 Y17.69527 G01 X-73.26336 Y17.67556 G01 X-73.35241 Y17.66550 G01 X-86.56049 Y17.66550 G01 X-86.60540 Y17.66804 G01 X-86.64967 Y17.67305 G01 X-86.71556 Y17.68618 G01 X-86.77829 Y17.71013 G01 X-86.85810 Y17.74856 G01 X-86.93394 Y17.79621 G01 X-86.99729 Y17.85956 G01 X-87.05251 Y17.92880 G01 X-87.10016 Y18.00462 G01 X-87.12973 Y18.08915 G01 X-87.14944 Y18.17548 G01 X-87.15950 Y18.26451 G01 X-87.15950 Y19.62483 G01 X-87.18965 Y19.89273 G01 X-87.20171 Y19.94548 G01 X-87.24967 Y20.15562 G01 X-87.33872 Y20.41010 G01 X-87.45569 Y20.65303 G01 X-87.59915 Y20.88132 G01 X-87.76724 Y21.09209 G01 X-92.62291 Y25.94776 G01 X-92.83368 Y26.11585 G01 X-93.06197 Y26.25931 G01 X-93.30487 Y26.37628 G01 X-93.55938 Y26.46533 G01 X-93.82225 Y26.52535 G01 X-94.04833 Y26.55080 G01 X-94.09014 Y26.55550 G01 X-95.42649 Y26.55550 G01 X-95.47139 Y26.55804 G01 X-95.51566 Y26.56305 G01 X-95.58155 Y26.57618 G01 X-95.64429 Y26.60013 G01 X-95.72410 Y26.63856 G01 X-95.79994 Y26.68621 G01 X-95.86329 Y26.74956 G01 X-95.91851 Y26.81880 G01 X-95.96616 Y26.89462 G01 X-95.99573 Y26.97915 G01 X-96.01544 Y27.06548 G01 X-96.02549 Y27.15451 G01 X-96.02549 Y29.94092 G01 X-96.04764 Y30.08090 G01 X-96.07114 Y30.15318 G01 X-96.08549 Y30.21221 G01 X-96.09491 Y30.26977 G01 X-96.09898 Y30.30353 G01 X-96.09913 Y30.30576 G01 X-96.10804 Y30.38471 G01 X-96.13786 Y30.46990 G01 X-96.18587 Y30.54633 G01 X-96.24967 Y30.61013 G01 X-96.32610 Y30.65814 G01 X-96.41086 Y30.68780 G01 X-96.50550 Y30.69827 G01 X-96.52397 Y30.70213 G01 X-96.52415 Y30.70106 G01 X-96.58173 Y30.71018 G01 X-96.64279 Y30.72486 G01 X-96.71508 Y30.74836 G01 X-96.85511 Y30.77051 G01 X-96.99684 Y30.77051 G01 X-97.05318 Y30.76159 G01 X-97.13685 Y30.74836 G01 X-97.20913 Y30.72486 G01 X-97.26816 Y30.71051 G01 X-97.32572 Y30.70109 G01 X-97.35948 Y30.69702 G01 X-97.36171 Y30.69687 G01 X-97.44063 Y30.68796 G01 X-97.52585 Y30.65814 G01 X-97.60228 Y30.61013 G01 X-97.66608 Y30.54633 G01 X-97.71409 Y30.46990 G01 X-97.74375 Y30.38511 G01 X-97.75422 Y30.29050 G01 X-97.75808 Y30.27203 G01 X-97.75701 Y30.27185 G01 X-97.76613 Y30.21427 G01 X-97.78079 Y30.15318 G01 X-97.80431 Y30.08090 G01 X-97.82643 Y29.94092 G01 X-97.82643 Y26.49188 G01 X-97.83649 Y26.40287 G01 X-97.85620 Y26.31651 G01 X-97.88579 Y26.23198 G01 X-97.93344 Y26.15614 G01 X-97.98866 Y26.08690 G01 X-98.05201 Y26.02355 G01 X-98.14705 Y25.94776 G01 X-98.33771 Y25.75710 G01 X-98.50583 Y25.54631 G01 X-98.64924 Y25.31802 G01 X-98.76623 Y25.07511 G01 X-98.85528 Y24.82061 G01 X-98.91528 Y24.55777 G01 X-98.94543 Y24.28982 G01 X-98.94543 Y24.02023 G01 X-98.91528 Y23.75228 G01 X-98.85528 Y23.48944 G01 X-98.76623 Y23.23494 G01 X-98.64924 Y22.99204 G01 X-98.50583 Y22.76374 G01 X-98.33771 Y22.55295 G01 X-98.14705 Y22.36229 G01 X-97.93626 Y22.19417 G01 X-97.82173 Y22.12221 G01 X-97.78503 Y22.09618 G01 X-97.75020 Y22.06839 G01 X-97.70139 Y22.02224 G01 X-97.66100 Y21.96854 G01 X-97.61391 Y21.89356 G01 X-97.57502 Y21.81289 G01 X-97.55511 Y21.72559 G01 X-97.54518 Y21.63758 G01 X-97.54512 Y21.54797 G01 X-97.56511 Y21.46059 G01 X-97.59438 Y21.37700 G01 X-97.63321 Y21.29631 G01 X-97.68907 Y21.22630 G01 X-97.75168 Y21.16369 G01 X-97.82171 Y21.10786 G01 X-97.90885 Y21.05310 G01 X-97.98957 Y21.01421 G01 X-98.07314 Y20.98498 G01 X-98.11015 Y20.97655 G01 X-98.21985 Y20.93814 G01 X-98.29625 Y20.89013 G01 X-98.36003 Y20.82633 G01 X-98.40809 Y20.74988 G01 X-98.44649 Y20.64022 G01 X-98.45490 Y20.60327 G01 X-98.48411 Y20.51968 G01 X-98.52300 Y20.43890 G01 X-98.64924 Y20.23802 G01 X-98.76623 Y19.99511 G01 X-98.85528 Y19.74061 G01 X-98.91528 Y19.47777 G01 X-98.94543 Y19.20982 G01 X-98.94543 Y15.76523 G01 X-98.91528 Y15.49728 G01 X-98.85528 Y15.23444 G01 X-98.76623 Y14.97994 G01 X-98.64924 Y14.73704 G01 X-98.50583 Y14.50874 G01 X-98.33771 Y14.29795 G01 X-97.95406 Y13.91430 G01 X-97.92686 Y13.88423 G01 X-97.90154 Y13.85314 G01 X-97.86471 Y13.79965 G01 X-97.83707 Y13.74092 G01 X-97.80593 Y13.65802 G01 X-97.78406 Y13.57120 G01 X-97.78206 Y13.48167 G01 X-97.78996 Y13.39345 G01 X-97.79966 Y13.34621 G01 X-97.82643 Y13.17692 G01 X-97.82643 Y13.03513 G01 X-97.80431 Y12.89515 G01 X-97.78079 Y12.82287 G01 X-97.76644 Y12.76384 G01 X-97.75704 Y12.70628 G01 X-97.75297 Y12.67252 G01 X-97.75282 Y12.67029 G01 X-97.74391 Y12.59137 G01 X-97.71409 Y12.50615 G01 X-97.66608 Y12.42972 G01 X-97.60228 Y12.36592 G01 X-97.52585 Y12.31791 G01 X-97.44106 Y12.28825 G01 X-97.34642 Y12.27778 G01 X-97.32798 Y12.27392 G01 X-97.32780 Y12.27499 G01 X-97.27022 Y12.26587 G01 X-97.20913 Y12.25119 G01 X-97.13685 Y12.22769 G01 X-96.99687 Y12.20554 G01 X-96.85508 Y12.20554 G01 X-96.70959 Y12.22856 G01 X-96.68729 Y12.23460 G01 X-96.64810 Y12.24309 G01 X-96.58366 Y12.25162 G01 X-96.51866 Y12.24959 G01 X-96.43065 Y12.23966 G01 X-96.34335 Y12.21972 G01 X-96.26268 Y12.18086 G01 X-96.18772 Y12.13374 G01 X-96.11770 Y12.07791 G01 X-92.43205 Y8.39229 G01 X-92.22126 Y8.22417 G01 X-91.99296 Y8.08074 G01 X-91.75006 Y7.96377 G01 X-91.49556 Y7.87472 G01 X-91.23272 Y7.81472 G01 X-90.96477 Y7.78455 G01 X-75.38169 Y7.78455 G01 X-75.35891 Y7.78389 G01 X-75.33664 Y7.78262 G01 X-75.22736 Y7.76085 G01 X-75.14377 Y7.73161 G01 X-75.06303 Y7.69273 G01 X-74.99297 Y7.63687 G01 X-74.93034 Y7.57424 G01 X-74.87448 Y7.50418 G01 X-74.83559 Y7.42344 G01 X-74.80636 Y7.33984 G01 X-74.78647 Y7.25270 G01 X-74.78530 Y7.24236 G01 X-74.72528 Y6.97944 G01 X-74.63623 Y6.72494 G01 X-74.51926 Y6.48204 G01 X-74.37580 Y6.25371 G01 X-74.29496 Y6.15232 G01 X-74.20771 Y6.04295 G01 X-69.31285 Y1.14809 G01 X-69.29735 Y1.13173 G01 X-69.28249 Y1.11509 G01 X-69.22044 Y1.02215 G01 X-69.18201 Y0.94235 G01 X-69.15242 Y0.85784 G01 X-69.14239 Y0.76879 G01 X-69.14239 Y0.68022 G01 X-69.15242 Y0.59119 G01 X-69.18204 Y0.50663 G01 X-69.22047 Y0.42685 G01 X-69.26812 Y0.35103 G01 X-69.33144 Y0.28771 G01 X-69.40068 Y0.23249 G01 X-69.47650 Y0.18484 G01 X-69.56103 Y0.15528 G01 X-69.64737 Y0.13557 G01 X-69.73642 Y0.12551 G01 X-100.29046 Y0.12551 G01 X-100.33537 Y0.12805 G01 X-100.37966 Y0.13305 G01 X-100.44558 Y0.14618 G01 X-100.50834 Y0.17016 G01 X-100.58815 Y0.20859 G01 X-100.66394 Y0.25624 G01 X-100.72729 Y0.31956 G01 X-100.78251 Y0.38880 G01 X-100.83016 Y0.46462 G01 X-100.85970 Y0.54915 G01 X-100.87941 Y0.63549 G01 X-100.88947 Y0.72452 G01 X-100.88947 Y78.06551 G01 X-100.88695 Y78.11042 G01 X-100.88195 Y78.15471 G01 X-100.86879 Y78.22063 G01 X-100.84484 Y78.28342 G01 X-100.80641 Y78.36320 G01 X-100.75876 Y78.43902 G01 X-100.69541 Y78.50234 G01 X-100.62620 Y78.55756 G01 X-100.55035 Y78.60521 G01 X-100.46585 Y78.63477 G01 X-100.37951 Y78.65448 G01 X-100.29046 Y78.66454 G01 X-38.32398 Y78.66454 G01 X-38.27905 Y78.66200 G01 X-38.23478 Y78.65700 G01 X-38.16889 Y78.64387 G01 X-38.10615 Y78.61992 G01 X-38.02635 Y78.58148 G01 X-37.95050 Y78.53383 G01 X-37.88715 Y78.47049 G01 X-37.83193 Y78.40125 G01 X-37.78426 Y78.32538 G01 X-37.75469 Y78.24077 G01 X-37.73501 Y78.15443 G01 X-37.72498 Y78.06551 G01 X-37.72498 Y69.99484 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-42.19317 Y70.93001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-42.19317 Y70.93001 G01 X-42.21930 Y70.85539 G01 X-42.26726 Y70.77906 G01 X-42.29911 Y70.74721 G01 X-42.35976 Y70.69743 G01 X-42.42890 Y70.66047 G01 X-42.48196 Y70.64437 G01 X-42.48196 Y70.64122 G01 X-42.40734 Y70.66735 G01 X-42.33101 Y70.71531 G01 X-42.29911 Y70.74721 G01 X-42.24940 Y70.80779 G01 X-42.21244 Y70.87693 G01 X-42.19634 Y70.93001 G01 X-42.19317 Y70.93001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-42.19317 Y72.63004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-42.19317 Y72.63004 G01 X-42.21930 Y72.70466 G01 X-42.26726 Y72.78099 G01 X-42.29913 Y72.81287 G01 X-42.35976 Y72.86260 G01 X-42.42890 Y72.89956 G01 X-42.48196 Y72.91566 G01 X-42.48196 Y72.91883 G01 X-42.40734 Y72.89270 G01 X-42.33101 Y72.84474 G01 X-42.29913 Y72.81287 G01 X-42.24940 Y72.75224 G01 X-42.21244 Y72.68310 G01 X-42.19634 Y72.63004 G01 X-42.19317 Y72.63004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-44.18199 Y70.64122 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-44.18199 Y70.64122 G01 X-44.25661 Y70.66735 G01 X-44.33294 Y70.71531 G01 X-44.36464 Y70.74703 G01 X-44.30421 Y70.69743 G01 X-44.23507 Y70.66047 G01 X-44.18199 Y70.64437 G01 X-44.18199 Y70.64122 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-44.36497 Y70.74736 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-44.36497 Y70.74736 G01 X-44.41457 Y70.80779 G01 X-44.45153 Y70.87693 G01 X-44.46763 Y70.93001 G01 X-44.47078 Y70.93001 G01 X-44.44465 Y70.85539 G01 X-44.39669 Y70.77906 G01 X-44.36497 Y70.74736 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-44.18199 Y72.91566 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-44.18199 Y72.91566 G01 X-44.23507 Y72.89956 G01 X-44.30421 Y72.86260 G01 X-44.36479 Y72.81289 G01 X-44.41457 Y72.75224 G01 X-44.45153 Y72.68310 G01 X-44.46763 Y72.63004 G01 X-44.47078 Y72.63004 G01 X-44.44465 Y72.70466 G01 X-44.39669 Y72.78099 G01 X-44.33294 Y72.84474 G01 X-44.25661 Y72.89270 G01 X-44.18199 Y72.91883 G01 X-44.18199 Y72.91566 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-48.31944 Y73.58264 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-48.31944 Y73.58264 G01 X-48.42719 Y73.61924 G01 X-48.67144 Y73.66783 G01 X-48.91997 Y73.68411 G01 X-49.16851 Y73.66783 G01 X-49.41276 Y73.61924 G01 X-49.52051 Y73.58264 G01 X-49.51525 Y73.57738 G01 X-49.32874 Y73.63397 G01 X-49.25183 Y73.64926 G01 X-48.95919 Y73.67809 G01 X-48.88078 Y73.67809 G01 X-48.58815 Y73.64926 G01 X-48.51124 Y73.63397 G01 X-48.32470 Y73.57738 G01 X-48.31944 Y73.58264 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-47.01589 Y71.78003 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-47.01589 Y71.78003 G01 X-47.03217 Y72.02856 G01 X-47.08076 Y72.27281 G01 X-47.11736 Y72.38056 G01 X-47.12262 Y72.37530 G01 X-47.06603 Y72.18876 G01 X-47.05074 Y72.11185 G01 X-47.02191 Y71.81922 G01 X-47.02191 Y71.74081 G01 X-47.05074 Y71.44817 G01 X-47.06603 Y71.37126 G01 X-47.12262 Y71.18475 G01 X-47.11736 Y71.17949 G01 X-47.08076 Y71.28724 G01 X-47.03217 Y71.53149 G01 X-47.01589 Y71.78003 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-48.31944 Y69.97739 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-48.31944 Y69.97739 G01 X-48.42716 Y69.94081 G01 X-48.67144 Y69.89222 G01 X-48.91997 Y69.87594 G01 X-49.16851 Y69.89222 G01 X-49.41276 Y69.94081 G01 X-49.52051 Y69.97741 G01 X-49.51527 Y69.98265 G01 X-49.32874 Y69.92605 G01 X-49.25183 Y69.91076 G01 X-48.95919 Y69.88193 G01 X-48.88078 Y69.88193 G01 X-48.58815 Y69.91076 G01 X-48.51124 Y69.92605 G01 X-48.32467 Y69.98265 G01 X-48.31944 Y69.97739 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-50.71735 Y71.18473 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-50.71735 Y71.18473 G01 X-50.72259 Y71.17949 G01 X-50.75919 Y71.28724 G01 X-50.80778 Y71.53149 G01 X-50.82406 Y71.78003 G01 X-50.80778 Y72.02856 G01 X-50.75919 Y72.27281 G01 X-50.72259 Y72.38056 G01 X-50.71735 Y72.37533 G01 X-50.77395 Y72.18876 G01 X-50.78924 Y72.11185 G01 X-50.81807 Y71.81922 G01 X-50.81807 Y71.74081 G01 X-50.78924 Y71.44817 G01 X-50.77395 Y71.37126 G01 X-50.71735 Y71.18473 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.09998 Y70.28000 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.09998 Y70.28000 G01 X-52.09998 Y70.25760 G01 X-52.10755 Y70.19047 G01 X-52.13732 Y70.10538 G01 X-52.18527 Y70.02905 G01 X-52.24900 Y69.96532 G01 X-52.32530 Y69.91737 G01 X-52.41042 Y69.88760 G01 X-52.47755 Y69.88003 G01 X-52.49995 Y69.88003 G01 X-52.42195 Y69.88770 G01 X-52.34692 Y69.91046 G01 X-52.27775 Y69.94742 G01 X-52.21715 Y69.99717 G01 X-52.16739 Y70.05778 G01 X-52.13043 Y70.12694 G01 X-52.10767 Y70.20197 G01 X-52.09998 Y70.28000 G01 X-52.09998 Y70.93001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.09998 Y72.63004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.09998 Y72.63004 G01 X-52.09998 Y73.30245 G01 X-52.10755 Y73.36958 G01 X-52.13732 Y73.45467 G01 X-52.18527 Y73.53100 G01 X-52.24900 Y73.59473 G01 X-52.32530 Y73.64268 G01 X-52.41042 Y73.67245 G01 X-52.47755 Y73.68002 G01 X-53.14996 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.09998 Y73.28002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.09998 Y73.28002 G01 X-52.10767 Y73.35805 G01 X-52.13043 Y73.43308 G01 X-52.16739 Y73.50225 G01 X-52.21715 Y73.56285 G01 X-52.27775 Y73.61261 G01 X-52.34692 Y73.64957 G01 X-52.42195 Y73.67233 G01 X-52.49998 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.84999 Y73.68002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.84999 Y73.68002 G01 X-55.52240 Y73.68002 G01 X-55.58953 Y73.67245 G01 X-55.67462 Y73.64268 G01 X-55.75095 Y73.59473 G01 X-55.81468 Y73.53100 G01 X-55.86263 Y73.45470 G01 X-55.89240 Y73.36958 G01 X-55.89997 Y73.30245 G01 X-55.89997 Y73.28005 G01 X-55.89230 Y73.35805 G01 X-55.86954 Y73.43308 G01 X-55.83258 Y73.50225 G01 X-55.78283 Y73.56285 G01 X-55.72222 Y73.61261 G01 X-55.65306 Y73.64957 G01 X-55.57803 Y73.67233 G01 X-55.50000 Y73.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-55.78293 Y69.99730 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-55.78293 Y69.99730 G01 X-55.81468 Y70.02905 G01 X-55.86263 Y70.10535 G01 X-55.89240 Y70.19047 G01 X-55.89997 Y70.25760 G01 X-55.89997 Y70.27998 G01 X-55.89230 Y70.20197 G01 X-55.86954 Y70.12694 G01 X-55.83258 Y70.05778 G01 X-55.78293 Y69.99730 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-55.50002 Y69.88003 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-55.50002 Y69.88003 G01 X-55.52240 Y69.88003 G01 X-55.58953 Y69.88760 G01 X-55.67462 Y69.91737 G01 X-55.75095 Y69.96532 G01 X-55.78270 Y69.99707 G01 X-55.72222 Y69.94742 G01 X-55.65306 Y69.91046 G01 X-55.57803 Y69.88770 G01 X-55.50002 Y69.88003 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y65.64732 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y65.64732 G01 X-54.86998 Y65.65248 G01 X-54.94506 Y65.59485 G01 X-55.07480 Y65.46510 G01 X-55.18651 Y65.31951 G01 X-55.27828 Y65.16056 G01 X-55.34851 Y64.99104 G01 X-55.37556 Y64.89005 G01 X-55.37178 Y64.89005 G01 X-55.32664 Y65.03881 G01 X-55.29664 Y65.11126 G01 X-55.20421 Y65.28415 G01 X-55.16065 Y65.34933 G01 X-55.03629 Y65.50087 G01 X-54.98085 Y65.55631 G01 X-54.86998 Y65.64732 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y64.89005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y64.89005 G01 X-52.66820 Y64.89005 G01 X-52.71334 Y65.03881 G01 X-52.74334 Y65.11126 G01 X-52.83574 Y65.28415 G01 X-52.87930 Y65.34933 G01 X-53.00368 Y65.50087 G01 X-53.05913 Y65.55631 G01 X-53.16995 Y65.64730 G01 X-53.16995 Y65.65245 G01 X-53.09492 Y65.59485 G01 X-52.96515 Y65.46508 G01 X-52.85339 Y65.31948 G01 X-52.76165 Y65.16056 G01 X-52.69144 Y64.99101 G01 X-52.66437 Y64.89005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y63.19002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y63.19002 G01 X-52.66818 Y63.19002 G01 X-52.71334 Y63.04121 G01 X-52.74334 Y62.96877 G01 X-52.83574 Y62.79589 G01 X-52.87930 Y62.73069 G01 X-53.00368 Y62.57915 G01 X-53.05913 Y62.52371 G01 X-53.16995 Y62.43272 G01 X-53.16995 Y62.42759 G01 X-53.09492 Y62.48520 G01 X-52.96515 Y62.61494 G01 X-52.85339 Y62.76059 G01 X-52.76165 Y62.91949 G01 X-52.69144 Y63.08903 G01 X-52.66437 Y63.19002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y62.42757 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y62.42757 G01 X-54.86998 Y62.43270 G01 X-54.98085 Y62.52371 G01 X-55.03629 Y62.57915 G01 X-55.16065 Y62.73069 G01 X-55.20421 Y62.79589 G01 X-55.29664 Y62.96877 G01 X-55.32664 Y63.04121 G01 X-55.37178 Y63.19002 G01 X-55.37556 Y63.19002 G01 X-55.34851 Y63.08903 G01 X-55.27828 Y62.91949 G01 X-55.18651 Y62.76056 G01 X-55.07480 Y62.61494 G01 X-54.94506 Y62.48520 G01 X-54.86998 Y62.42757 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y58.14734 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y58.14734 G01 X-54.86998 Y58.15247 G01 X-54.94506 Y58.09486 G01 X-55.07480 Y57.96509 G01 X-55.18651 Y57.81950 G01 X-55.27828 Y57.66055 G01 X-55.34851 Y57.49103 G01 X-55.37556 Y57.39004 G01 X-55.37178 Y57.39004 G01 X-55.32664 Y57.53880 G01 X-55.29664 Y57.61124 G01 X-55.20421 Y57.78414 G01 X-55.16065 Y57.84934 G01 X-55.03629 Y58.00088 G01 X-54.98085 Y58.05633 G01 X-54.86998 Y58.14734 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y57.39004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y57.39004 G01 X-52.66820 Y57.39004 G01 X-52.71334 Y57.53880 G01 X-52.74334 Y57.61124 G01 X-52.83574 Y57.78414 G01 X-52.87930 Y57.84934 G01 X-53.00368 Y58.00088 G01 X-53.05913 Y58.05633 G01 X-53.16995 Y58.14729 G01 X-53.16995 Y58.15247 G01 X-53.09492 Y58.09486 G01 X-52.96515 Y57.96509 G01 X-52.85339 Y57.81947 G01 X-52.76165 Y57.66057 G01 X-52.69144 Y57.49100 G01 X-52.66437 Y57.39004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y55.69001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y55.69001 G01 X-52.66820 Y55.69001 G01 X-52.71334 Y55.54125 G01 X-52.74334 Y55.46878 G01 X-52.83574 Y55.29588 G01 X-52.87930 Y55.23068 G01 X-53.00368 Y55.07917 G01 X-53.05913 Y55.02370 G01 X-53.16995 Y54.93274 G01 X-53.16995 Y54.92758 G01 X-53.09492 Y54.98519 G01 X-52.96515 Y55.11496 G01 X-52.85339 Y55.26058 G01 X-52.76165 Y55.41948 G01 X-52.69144 Y55.58905 G01 X-52.66437 Y55.69001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y54.92758 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y54.92758 G01 X-54.86998 Y54.93271 G01 X-54.98085 Y55.02370 G01 X-55.03629 Y55.07917 G01 X-55.16065 Y55.23068 G01 X-55.20421 Y55.29588 G01 X-55.29664 Y55.46878 G01 X-55.32664 Y55.54125 G01 X-55.37178 Y55.69001 G01 X-55.37556 Y55.69001 G01 X-55.34851 Y55.58902 G01 X-55.27828 Y55.41950 G01 X-55.18651 Y55.26058 G01 X-55.07480 Y55.11496 G01 X-54.94506 Y54.98519 G01 X-54.86998 Y54.92758 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-58.35874 Y49.81588 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-58.35874 Y49.81588 G01 X-58.17650 Y49.76056 G01 X-58.10403 Y49.73054 G01 X-57.75826 Y49.54573 G01 X-57.69306 Y49.50217 G01 X-57.38999 Y49.25345 G01 X-57.33454 Y49.19800 G01 X-57.08582 Y48.89493 G01 X-57.04226 Y48.82973 G01 X-56.85745 Y48.48396 G01 X-56.82743 Y48.41149 G01 X-56.71361 Y48.03631 G01 X-56.69832 Y47.95942 G01 X-56.65989 Y47.56923 G01 X-56.65796 Y47.53001 G01 X-56.65796 Y35.60702 G01 X-56.65989 Y35.56783 G01 X-56.69832 Y35.17763 G01 X-56.71361 Y35.10075 G01 X-56.82743 Y34.72557 G01 X-56.85745 Y34.65310 G01 X-57.04226 Y34.30733 G01 X-57.08582 Y34.24213 G01 X-57.33454 Y33.93905 G01 X-57.36090 Y33.90997 G01 X-57.38292 Y33.88795 G01 X-57.41201 Y33.86158 G01 X-57.71508 Y33.61287 G01 X-57.78028 Y33.56931 G01 X-58.12605 Y33.38450 G01 X-58.19852 Y33.35447 G01 X-58.35973 Y33.30558 G01 X-58.57149 Y33.30558 G01 X-58.59326 Y33.30522 G01 X-58.63804 Y33.30383 G01 X-58.65828 Y33.30352 G01 X-59.03204 Y33.30352 G01 X-59.05224 Y33.30317 G01 X-59.08772 Y33.30190 G01 X-59.10791 Y33.30154 G01 X-59.48165 Y33.30154 G01 X-59.50189 Y33.30124 G01 X-59.54667 Y33.29984 G01 X-59.56844 Y33.29948 G01 X-59.78013 Y33.29948 G01 X-59.94144 Y33.25056 G01 X-60.01391 Y33.22054 G01 X-60.35968 Y33.03573 G01 X-60.42488 Y32.99217 G01 X-60.72795 Y32.74345 G01 X-60.78340 Y32.68800 G01 X-61.03212 Y32.38493 G01 X-61.07568 Y32.31973 G01 X-61.26049 Y31.97396 G01 X-61.29051 Y31.90149 G01 X-61.40433 Y31.52631 G01 X-61.41962 Y31.44942 G01 X-61.45805 Y31.05923 G01 X-61.45998 Y31.02001 G01 X-61.45998 Y19.29788 G01 X-61.47806 Y19.11422 G01 X-61.47806 Y19.03581 G01 X-61.43963 Y18.64561 G01 X-61.42434 Y18.56873 G01 X-61.31053 Y18.19354 G01 X-61.30555 Y18.18150 G01 X-61.28050 Y18.12108 G01 X-61.09569 Y17.77531 G01 X-61.05213 Y17.71011 G01 X-60.80342 Y17.40703 G01 X-60.74797 Y17.35158 G01 X-60.44489 Y17.10287 G01 X-60.37969 Y17.05931 G01 X-60.03392 Y16.87450 G01 X-59.96146 Y16.84447 G01 X-59.77913 Y16.78918 G01 X-59.56852 Y16.78918 G01 X-59.54459 Y16.78961 G01 X-59.50192 Y16.79106 G01 X-59.47964 Y16.79144 G01 X-59.10791 Y16.79144 G01 X-59.08572 Y16.79187 G01 X-59.05224 Y16.79319 G01 X-59.03004 Y16.79362 G01 X-58.65828 Y16.79362 G01 X-58.63601 Y16.79400 G01 X-58.59334 Y16.79545 G01 X-58.56941 Y16.79588 G01 X-58.35874 Y16.79588 G01 X-58.19852 Y16.84447 G01 X-58.12605 Y16.87450 G01 X-57.78028 Y17.05931 G01 X-57.71508 Y17.10287 G01 X-57.41201 Y17.35158 G01 X-57.38292 Y17.37795 G01 X-57.36291 Y17.39796 G01 X-57.33654 Y17.42705 G01 X-57.08783 Y17.73012 G01 X-57.04427 Y17.79532 G01 X-56.85946 Y18.14109 G01 X-56.82943 Y18.21356 G01 X-56.71562 Y18.58874 G01 X-56.70032 Y18.66563 G01 X-56.66189 Y19.05582 G01 X-56.65996 Y19.09502 G01 X-56.65996 Y31.02001 G01 X-56.66189 Y31.05923 G01 X-56.70032 Y31.44942 G01 X-56.71562 Y31.52631 G01 X-56.82943 Y31.90149 G01 X-56.85946 Y31.97396 G01 X-57.04427 Y32.31973 G01 X-57.08783 Y32.38493 G01 X-57.33654 Y32.68800 G01 X-57.39199 Y32.74345 G01 X-57.69506 Y32.99217 G01 X-57.76027 Y33.03573 G01 X-58.10604 Y33.22054 G01 X-58.17850 Y33.25056 G01 X-58.35973 Y33.30558 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-59.78013 Y33.29948 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-59.78013 Y33.29948 G01 X-59.96146 Y33.35447 G01 X-60.03392 Y33.38450 G01 X-60.37969 Y33.56931 G01 X-60.44489 Y33.61287 G01 X-60.74797 Y33.86158 G01 X-60.80342 Y33.91703 G01 X-61.05213 Y34.22011 G01 X-61.09569 Y34.28531 G01 X-61.28050 Y34.63108 G01 X-61.30555 Y34.69150 G01 X-61.31053 Y34.70354 G01 X-61.42434 Y35.07873 G01 X-61.43963 Y35.15561 G01 X-61.47806 Y35.54581 G01 X-61.47806 Y35.62422 G01 X-61.45797 Y35.82826 G01 X-61.45797 Y47.53001 G01 X-61.45604 Y47.56923 G01 X-61.41761 Y47.95942 G01 X-61.40232 Y48.03631 G01 X-61.28850 Y48.41149 G01 X-61.25848 Y48.48396 G01 X-61.07367 Y48.82973 G01 X-61.03011 Y48.89493 G01 X-60.78139 Y49.19800 G01 X-60.72595 Y49.25345 G01 X-60.42287 Y49.50217 G01 X-60.35767 Y49.54573 G01 X-60.24370 Y49.60664 G01 X-60.01190 Y49.73054 G01 X-59.93943 Y49.76056 G01 X-59.77913 Y49.80918 G01 X-59.96146 Y49.86447 G01 X-60.03392 Y49.89450 G01 X-60.37969 Y50.07931 G01 X-60.44489 Y50.12287 G01 X-60.74797 Y50.37158 G01 X-60.80342 Y50.42703 G01 X-61.05213 Y50.73011 G01 X-61.09569 Y50.79531 G01 X-61.28050 Y51.14108 G01 X-61.30555 Y51.20150 G01 X-61.31053 Y51.21354 G01 X-61.42434 Y51.58873 G01 X-61.43963 Y51.66561 G01 X-61.47806 Y52.05581 G01 X-61.47806 Y52.13422 G01 X-61.45998 Y52.31788 G01 X-61.45998 Y64.04001 G01 X-61.45805 Y64.07923 G01 X-61.41962 Y64.46942 G01 X-61.40433 Y64.54631 G01 X-61.29051 Y64.92149 G01 X-61.26049 Y64.99396 G01 X-61.12635 Y65.24494 G01 X-61.07568 Y65.33973 G01 X-61.03212 Y65.40493 G01 X-60.78340 Y65.70800 G01 X-60.72795 Y65.76345 G01 X-60.42488 Y66.01217 G01 X-60.35968 Y66.05573 G01 X-60.01391 Y66.24054 G01 X-59.94144 Y66.27056 G01 X-59.56626 Y66.38438 G01 X-59.48937 Y66.39967 G01 X-59.09918 Y66.43810 G01 X-59.02077 Y66.43810 G01 X-58.63057 Y66.39967 G01 X-58.55369 Y66.38438 G01 X-58.17850 Y66.27056 G01 X-58.10604 Y66.24054 G01 X-57.76027 Y66.05573 G01 X-57.69506 Y66.01217 G01 X-57.39199 Y65.76345 G01 X-57.33654 Y65.70800 G01 X-57.08783 Y65.40493 G01 X-57.04427 Y65.33973 G01 X-56.85946 Y64.99396 G01 X-56.82943 Y64.92149 G01 X-56.71562 Y64.54631 G01 X-56.70032 Y64.46942 G01 X-56.66189 Y64.07923 G01 X-56.65996 Y64.04001 G01 X-56.65996 Y52.11502 G01 X-56.66189 Y52.07582 G01 X-56.70032 Y51.68563 G01 X-56.71562 Y51.60874 G01 X-56.82943 Y51.23356 G01 X-56.85946 Y51.16109 G01 X-57.04427 Y50.81532 G01 X-57.08783 Y50.75012 G01 X-57.33654 Y50.44705 G01 X-57.36291 Y50.41796 G01 X-57.38292 Y50.39795 G01 X-57.41201 Y50.37158 G01 X-57.71508 Y50.12287 G01 X-57.78028 Y50.07931 G01 X-58.12605 Y49.89450 G01 X-58.19852 Y49.86447 G01 X-58.35874 Y49.81588 G01 X-58.56941 Y49.81588 G01 X-58.59334 Y49.81545 G01 X-58.63601 Y49.81400 G01 X-58.65828 Y49.81362 G01 X-59.03004 Y49.81362 G01 X-59.05224 Y49.81319 G01 X-59.08572 Y49.81187 G01 X-59.10791 Y49.81144 G01 X-59.47964 Y49.81144 G01 X-59.50192 Y49.81106 G01 X-59.54459 Y49.80961 G01 X-59.56852 Y49.80918 G01 X-59.77913 Y49.80918 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-66.49995 Y53.66962 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-66.49995 Y53.66962 G01 X-66.57656 Y53.76297 G01 X-66.63200 Y53.81842 G01 X-66.93508 Y54.06716 G01 X-67.00028 Y54.11072 G01 X-67.34605 Y54.29553 G01 X-67.41849 Y54.32555 G01 X-67.79367 Y54.43939 G01 X-67.87058 Y54.45466 G01 X-68.26078 Y54.49309 G01 X-68.33919 Y54.49309 G01 X-68.72938 Y54.45466 G01 X-68.80627 Y54.43939 G01 X-69.18148 Y54.32555 G01 X-69.25392 Y54.29553 G01 X-69.59969 Y54.11072 G01 X-69.66489 Y54.06716 G01 X-69.96796 Y53.81844 G01 X-69.99705 Y53.79208 G01 X-74.11205 Y49.67710 G01 X-74.13839 Y49.64801 G01 X-74.38713 Y49.34494 G01 X-74.43069 Y49.27974 G01 X-74.61550 Y48.93397 G01 X-74.64553 Y48.86153 G01 X-74.75934 Y48.48632 G01 X-74.77463 Y48.40943 G01 X-74.80067 Y48.14502 G01 X-87.29587 Y48.14502 G01 X-91.03792 Y51.88708 G01 X-91.06701 Y51.91344 G01 X-91.37008 Y52.16216 G01 X-91.43528 Y52.20572 G01 X-91.78105 Y52.39053 G01 X-91.85352 Y52.42055 G01 X-92.22870 Y52.53437 G01 X-92.30559 Y52.54966 G01 X-92.69578 Y52.58809 G01 X-92.73500 Y52.59002 G01 X-95.89898 Y52.59002 G01 X-95.89898 Y56.41300 G01 X-95.90091 Y56.45222 G01 X-95.91053 Y56.54975 G01 X-95.92580 Y56.62666 G01 X-95.95425 Y56.72047 G01 X-95.97396 Y56.76807 G01 X-95.97396 Y56.83802 G01 X-95.98168 Y56.91605 G01 X-96.00192 Y56.98277 G01 X-96.00555 Y56.99319 G01 X-96.03576 Y57.04973 G01 X-96.04559 Y57.06537 G01 X-96.08478 Y57.11307 G01 X-96.09893 Y57.12722 G01 X-96.14663 Y57.16639 G01 X-96.16225 Y57.17622 G01 X-96.21879 Y57.20645 G01 X-96.22923 Y57.21008 G01 X-96.29595 Y57.23032 G01 X-96.37398 Y57.23802 G01 X-96.44391 Y57.23802 G01 X-96.49153 Y57.25773 G01 X-96.58534 Y57.28618 G01 X-96.66225 Y57.30147 G01 X-96.75976 Y57.31109 G01 X-96.83819 Y57.31109 G01 X-96.93573 Y57.30147 G01 X-97.01264 Y57.28618 G01 X-97.10642 Y57.25773 G01 X-97.15404 Y57.23802 G01 X-97.22397 Y57.23802 G01 X-97.30202 Y57.23032 G01 X-97.36854 Y57.21013 G01 X-97.37921 Y57.20642 G01 X-97.43550 Y57.17632 G01 X-97.45145 Y57.16631 G01 X-97.49887 Y57.12740 G01 X-97.51335 Y57.11290 G01 X-97.55224 Y57.06548 G01 X-97.56232 Y57.04947 G01 X-97.59232 Y56.99334 G01 X-97.59626 Y56.98211 G01 X-97.61627 Y56.91605 G01 X-97.62399 Y56.83802 G01 X-97.62399 Y56.76807 G01 X-97.64370 Y56.72047 G01 X-97.67215 Y56.62666 G01 X-97.68744 Y56.54975 G01 X-97.69707 Y56.45222 G01 X-97.69897 Y56.41300 G01 X-97.69897 Y52.28359 G01 X-97.84469 Y52.20572 G01 X-97.90987 Y52.16216 G01 X-98.21297 Y51.91344 G01 X-98.26842 Y51.85799 G01 X-98.51713 Y51.55492 G01 X-98.56067 Y51.48972 G01 X-98.74550 Y51.14395 G01 X-98.77553 Y51.07148 G01 X-98.88934 Y50.69630 G01 X-98.90461 Y50.61941 G01 X-98.94306 Y50.22922 G01 X-98.94306 Y50.15081 G01 X-98.90461 Y49.76061 G01 X-98.88934 Y49.68373 G01 X-98.77553 Y49.30854 G01 X-98.74550 Y49.23608 G01 X-98.56067 Y48.89031 G01 X-98.51713 Y48.82511 G01 X-98.26842 Y48.52203 G01 X-98.21297 Y48.46658 G01 X-97.90987 Y48.21787 G01 X-97.84469 Y48.17431 G01 X-97.49892 Y47.98950 G01 X-97.42646 Y47.95947 G01 X-97.05125 Y47.84566 G01 X-96.97439 Y47.83037 G01 X-96.58419 Y47.79194 G01 X-96.54500 Y47.79000 G01 X-93.72911 Y47.79000 G01 X-89.98705 Y44.04795 G01 X-89.95797 Y44.02158 G01 X-89.65489 Y43.77287 G01 X-89.58969 Y43.72931 G01 X-89.24392 Y43.54450 G01 X-89.17146 Y43.51447 G01 X-88.79627 Y43.40066 G01 X-88.71939 Y43.38537 G01 X-88.32919 Y43.34694 G01 X-88.29000 Y43.34500 G01 X-72.41500 Y43.34500 G01 X-72.37578 Y43.34694 G01 X-71.98559 Y43.38537 G01 X-71.90870 Y43.40066 G01 X-71.53352 Y43.51447 G01 X-71.46105 Y43.54450 G01 X-71.11528 Y43.72931 G01 X-71.05008 Y43.77287 G01 X-70.74701 Y44.02158 G01 X-70.69156 Y44.07703 G01 X-70.44284 Y44.38011 G01 X-70.39928 Y44.44531 G01 X-70.21447 Y44.79108 G01 X-70.18445 Y44.86354 G01 X-70.07063 Y45.23873 G01 X-70.05534 Y45.31561 G01 X-70.01691 Y45.70581 G01 X-70.01498 Y45.74500 G01 X-70.01498 Y46.98592 G01 X-66.60292 Y50.39795 G01 X-66.57658 Y50.42703 G01 X-66.49998 Y50.52038 G01 X-66.40287 Y50.79173 G01 X-66.38534 Y50.84936 G01 X-66.28715 Y51.24141 G01 X-66.27996 Y51.27740 G01 X-66.22179 Y51.66947 G01 X-66.21946 Y51.69312 G01 X-66.20020 Y52.08520 G01 X-66.20020 Y52.10483 G01 X-66.21946 Y52.49693 G01 X-66.22179 Y52.52058 G01 X-66.27996 Y52.91265 G01 X-66.28715 Y52.94862 G01 X-66.38534 Y53.34069 G01 X-66.40287 Y53.39832 G01 X-66.49995 Y53.66962 G01 X-66.49998 Y63.57931 G01 X-66.50429 Y63.59358 G01 X-66.51852 Y63.66500 G01 X-72.05587 Y63.66500 G01 X-76.43292 Y59.28795 G01 X-76.46201 Y59.26158 G01 X-76.76508 Y59.01287 G01 X-76.83028 Y58.96931 G01 X-77.17605 Y58.78450 G01 X-77.24852 Y58.75447 G01 X-77.62370 Y58.64066 G01 X-77.70059 Y58.62537 G01 X-78.09078 Y58.58694 G01 X-78.16919 Y58.58694 G01 X-78.55939 Y58.62537 G01 X-78.63627 Y58.64066 G01 X-79.01146 Y58.75447 G01 X-79.08392 Y58.78450 G01 X-79.42969 Y58.96931 G01 X-79.49489 Y59.01287 G01 X-79.79797 Y59.26158 G01 X-79.85342 Y59.31703 G01 X-80.10213 Y59.62011 G01 X-80.14569 Y59.68531 G01 X-80.33050 Y60.03108 G01 X-80.36053 Y60.10354 G01 X-80.47434 Y60.47873 G01 X-80.48963 Y60.55561 G01 X-80.52806 Y60.94581 G01 X-80.52806 Y61.02422 G01 X-80.48963 Y61.41441 G01 X-80.47434 Y61.49130 G01 X-80.36053 Y61.86648 G01 X-80.33050 Y61.93895 G01 X-80.14569 Y62.28472 G01 X-80.10213 Y62.34992 G01 X-79.85342 Y62.65299 G01 X-79.82705 Y62.68208 G01 X-74.74705 Y67.76208 G01 X-74.71797 Y67.78844 G01 X-74.41489 Y68.03716 G01 X-74.34969 Y68.08072 G01 X-74.00392 Y68.26553 G01 X-73.93146 Y68.29555 G01 X-73.55627 Y68.40937 G01 X-73.47939 Y68.42466 G01 X-73.08919 Y68.46309 G01 X-73.05000 Y68.46502 G01 X-66.56000 Y68.46502 G01 X-66.56000 Y69.38000 G01 X-69.24000 Y69.38000 G01 X-69.27919 Y69.38194 G01 X-69.66939 Y69.42037 G01 X-69.74627 Y69.43566 G01 X-70.12146 Y69.54947 G01 X-70.19392 Y69.57950 G01 X-70.53969 Y69.76431 G01 X-70.60489 Y69.80787 G01 X-70.69280 Y69.88000 G01 X-70.74000 Y69.88000 G01 X-70.81803 Y69.88770 G01 X-70.88142 Y69.90693 G01 X-70.89570 Y69.91188 G01 X-70.95135 Y69.94162 G01 X-70.96750 Y69.95178 G01 X-71.01483 Y69.99060 G01 X-71.02940 Y70.00517 G01 X-71.06822 Y70.05250 G01 X-71.07838 Y70.06865 G01 X-71.10812 Y70.12430 G01 X-71.11307 Y70.13858 G01 X-71.13230 Y70.20197 G01 X-71.14000 Y70.28000 G01 X-71.14000 Y70.32720 G01 X-71.21213 Y70.41511 G01 X-71.25569 Y70.48031 G01 X-71.44050 Y70.82608 G01 X-71.46286 Y70.88000 G01 X-74.95500 Y70.88000 G01 X-74.99419 Y70.88193 G01 X-75.09173 Y70.89156 G01 X-75.16864 Y70.90685 G01 X-75.26244 Y70.93530 G01 X-75.31004 Y70.95501 G01 X-75.37999 Y70.95501 G01 X-75.45802 Y70.96270 G01 X-75.52401 Y70.98272 G01 X-75.53534 Y70.98668 G01 X-75.59127 Y71.01658 G01 X-75.60755 Y71.02681 G01 X-75.65477 Y71.06555 G01 X-75.66945 Y71.08023 G01 X-75.70819 Y71.12745 G01 X-75.71842 Y71.14373 G01 X-75.74832 Y71.19966 G01 X-75.75228 Y71.21099 G01 X-75.77230 Y71.27698 G01 X-75.77999 Y71.35501 G01 X-75.77999 Y71.42496 G01 X-75.79970 Y71.47256 G01 X-75.82815 Y71.56636 G01 X-75.84344 Y71.64327 G01 X-75.85307 Y71.74081 G01 X-75.85307 Y71.81922 G01 X-75.84344 Y71.91675 G01 X-75.82815 Y71.99366 G01 X-75.79970 Y72.08747 G01 X-75.77999 Y72.13507 G01 X-75.77999 Y72.20502 G01 X-75.77230 Y72.28305 G01 X-75.75223 Y72.34924 G01 X-75.74834 Y72.36031 G01 X-75.71835 Y72.41647 G01 X-75.70826 Y72.43250 G01 X-75.66932 Y72.47995 G01 X-75.65492 Y72.49435 G01 X-75.60742 Y72.53334 G01 X-75.59155 Y72.54330 G01 X-75.53521 Y72.57342 G01 X-75.52457 Y72.57715 G01 X-75.45802 Y72.59732 G01 X-75.37999 Y72.60502 G01 X-75.31004 Y72.60502 G01 X-75.26244 Y72.62473 G01 X-75.16864 Y72.65318 G01 X-75.09173 Y72.66847 G01 X-74.99419 Y72.67809 G01 X-74.95500 Y72.68002 G01 X-71.46286 Y72.68002 G01 X-71.44050 Y72.73395 G01 X-71.25569 Y73.07972 G01 X-71.21213 Y73.14492 G01 X-71.14000 Y73.23283 G01 X-71.14000 Y73.28002 G01 X-71.13230 Y73.35805 G01 X-71.11300 Y73.42168 G01 X-71.10814 Y73.43567 G01 X-71.07835 Y73.49145 G01 X-71.06827 Y73.50750 G01 X-71.02933 Y73.55495 G01 X-71.01493 Y73.56933 G01 X-70.96738 Y73.60837 G01 X-70.95163 Y73.61827 G01 X-70.89557 Y73.64822 G01 X-70.88203 Y73.65292 G01 X-70.81803 Y73.67233 G01 X-70.74000 Y73.68002 G01 X-70.69280 Y73.68002 G01 X-70.60489 Y73.75216 G01 X-70.53969 Y73.79572 G01 X-70.19392 Y73.98053 G01 X-70.12146 Y74.01055 G01 X-69.74627 Y74.12437 G01 X-69.66939 Y74.13966 G01 X-69.27919 Y74.17809 G01 X-69.24000 Y74.18002 G01 X-64.16000 Y74.18002 G01 X-64.12078 Y74.17809 G01 X-63.73059 Y74.13966 G01 X-63.65370 Y74.12437 G01 X-63.27852 Y74.01055 G01 X-63.20605 Y73.98053 G01 X-62.86028 Y73.79572 G01 X-62.79508 Y73.75216 G01 X-62.49201 Y73.50344 G01 X-62.43656 Y73.44799 G01 X-62.18784 Y73.14492 G01 X-62.14428 Y73.07972 G01 X-61.95947 Y72.73395 G01 X-61.92945 Y72.66148 G01 X-61.81563 Y72.28630 G01 X-61.80034 Y72.20941 G01 X-61.76191 Y71.81922 G01 X-61.75998 Y71.78000 G01 X-61.75998 Y64.56074 G01 X-61.75566 Y64.54646 G01 X-61.74035 Y64.46952 G01 X-61.70189 Y64.07923 G01 X-61.69996 Y64.04001 G01 X-61.69996 Y7.03672 G01 X-61.69971 Y7.03395 G01 X-61.70021 Y6.95554 G01 X-61.71116 Y6.85125 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-65.34113 Y4.96505 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-65.34113 Y4.96505 G01 X-66.34087 Y4.96505 G01 X-70.01498 Y8.63913 G01 X-70.01498 Y10.18500 G01 X-70.01691 Y10.22422 G01 X-70.05534 Y10.61441 G01 X-70.07063 Y10.69130 G01 X-70.18445 Y11.06648 G01 X-70.21447 Y11.13895 G01 X-70.39928 Y11.48472 G01 X-70.44284 Y11.54992 G01 X-70.69156 Y11.85299 G01 X-70.74701 Y11.90844 G01 X-71.05008 Y12.15716 G01 X-71.11528 Y12.20072 G01 X-71.46105 Y12.38553 G01 X-71.53352 Y12.41555 G01 X-71.90870 Y12.52937 G01 X-71.98559 Y12.54466 G01 X-72.37578 Y12.58309 G01 X-72.41500 Y12.58502 G01 X-89.83587 Y12.58502 G01 X-90.21728 Y12.96648 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-92.77450 Y5.59961 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-92.77450 Y5.59961 G01 X-92.77450 Y5.88044 G01 X-92.80594 Y6.15956 G01 X-92.86843 Y6.43334 G01 X-92.96119 Y6.69844 G01 X-93.08303 Y6.95148 G01 X-93.23243 Y7.18927 G01 X-93.40754 Y7.40883 G01 X-93.60617 Y7.60746 G01 X-93.82573 Y7.78257 G01 X-94.06352 Y7.93197 G01 X-94.31656 Y8.05381 G01 X-94.58166 Y8.14657 G01 X-94.85547 Y8.20908 G01 X-95.10972 Y8.23773 G01 X-95.13446 Y8.24050 G01 X-95.41544 Y8.24050 G01 X-95.44823 Y8.23682 G01 X-95.69446 Y8.20908 G01 X-95.96829 Y8.14657 G01 X-96.23337 Y8.05381 G01 X-96.48643 Y7.93197 G01 X-96.72420 Y7.78257 G01 X-96.94375 Y7.60746 G01 X-97.14241 Y7.40883 G01 X-97.31749 Y7.18927 G01 X-97.46506 Y6.95442 G01 X-97.46692 Y6.95145 G01 X-97.58876 Y6.69844 G01 X-97.68150 Y6.43334 G01 X-97.74401 Y6.15956 G01 X-97.77543 Y5.88044 G01 X-97.77543 Y5.59961 G01 X-97.74401 Y5.32049 G01 X-97.68150 Y5.04673 G01 X-97.58876 Y4.78161 G01 X-97.46692 Y4.52857 G01 X-97.31749 Y4.29078 G01 X-97.14241 Y4.07125 G01 X-96.94375 Y3.87259 G01 X-96.72422 Y3.69751 G01 X-96.48643 Y3.54808 G01 X-96.23339 Y3.42624 G01 X-95.96829 Y3.33350 G01 X-95.69451 Y3.27102 G01 X-95.41539 Y3.23957 G01 X-95.13456 Y3.23957 G01 X-94.85544 Y3.27102 G01 X-94.58166 Y3.33350 G01 X-94.31656 Y3.42624 G01 X-94.06352 Y3.54808 G01 X-93.82573 Y3.69751 G01 X-93.60617 Y3.87259 G01 X-93.40754 Y4.07125 G01 X-93.23248 Y4.29075 G01 X-93.08268 Y4.52936 G01 X-92.96119 Y4.78163 G01 X-92.86843 Y5.04673 G01 X-92.80594 Y5.32052 G01 X-92.77450 Y5.59961 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-91.85845 Y14.60760 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-91.85845 Y14.60760 G01 X-91.90434 Y14.75873 G01 X-91.91963 Y14.83561 G01 X-91.95806 Y15.22581 G01 X-91.96000 Y15.26500 G01 X-91.96000 Y18.49591 G01 X-95.21909 Y21.75500 G01 X-96.54500 Y21.75500 G01 X-96.58419 Y21.75694 G01 X-96.97439 Y21.79537 G01 X-97.05125 Y21.81066 G01 X-97.42646 Y21.92447 G01 X-97.49892 Y21.95450 G01 X-97.84469 Y22.13931 G01 X-97.90987 Y22.18287 G01 X-98.21297 Y22.43158 G01 X-98.26842 Y22.48703 G01 X-98.51713 Y22.79011 G01 X-98.56067 Y22.85531 G01 X-98.74550 Y23.20108 G01 X-98.77553 Y23.27354 G01 X-98.88934 Y23.64873 G01 X-98.90461 Y23.72561 G01 X-98.94306 Y24.11581 G01 X-98.94306 Y24.19422 G01 X-98.90461 Y24.58441 G01 X-98.88934 Y24.66130 G01 X-98.77553 Y25.03648 G01 X-98.74550 Y25.10895 G01 X-98.56067 Y25.45472 G01 X-98.51713 Y25.51992 G01 X-98.26842 Y25.82299 G01 X-98.21297 Y25.87844 G01 X-97.90987 Y26.12716 G01 X-97.84469 Y26.17072 G01 X-97.82595 Y26.18073 G01 X-97.82595 Y29.87000 G01 X-97.82402 Y29.90922 G01 X-97.81442 Y30.00675 G01 X-97.79912 Y30.08366 G01 X-97.77068 Y30.17747 G01 X-97.75099 Y30.22502 G01 X-97.75099 Y30.29502 G01 X-97.74330 Y30.37305 G01 X-97.72328 Y30.43906 G01 X-97.71929 Y30.45036 G01 X-97.68937 Y30.50640 G01 X-97.67921 Y30.52253 G01 X-97.64032 Y30.56995 G01 X-97.62592 Y30.58435 G01 X-97.57840 Y30.62334 G01 X-97.56255 Y30.63330 G01 X-97.50621 Y30.66342 G01 X-97.49557 Y30.66715 G01 X-97.42902 Y30.68732 G01 X-97.35099 Y30.69502 G01 X-97.28102 Y30.69502 G01 X-97.23342 Y30.71473 G01 X-97.13961 Y30.74318 G01 X-97.06270 Y30.75847 G01 X-96.96517 Y30.76809 G01 X-96.88676 Y30.76809 G01 X-96.78922 Y30.75847 G01 X-96.71231 Y30.74318 G01 X-96.61851 Y30.71473 G01 X-96.57091 Y30.69502 G01 X-96.50098 Y30.69502 G01 X-96.42293 Y30.68732 G01 X-96.35613 Y30.66705 G01 X-96.34581 Y30.66345 G01 X-96.28922 Y30.63319 G01 X-96.27365 Y30.62341 G01 X-96.22590 Y30.58425 G01 X-96.21175 Y30.57007 G01 X-96.17261 Y30.52237 G01 X-96.16278 Y30.50673 G01 X-96.13255 Y30.45019 G01 X-96.12890 Y30.43982 G01 X-96.10868 Y30.37305 G01 X-96.10098 Y30.29502 G01 X-96.10098 Y30.22512 G01 X-96.08122 Y30.17747 G01 X-96.05280 Y30.08366 G01 X-96.03751 Y30.00675 G01 X-96.02786 Y29.90922 G01 X-96.02593 Y29.87000 G01 X-96.02593 Y26.55502 G01 X-94.22499 Y26.55502 G01 X-94.18577 Y26.55309 G01 X-93.79558 Y26.51466 G01 X-93.71869 Y26.49937 G01 X-93.34351 Y26.38555 G01 X-93.27104 Y26.35553 G01 X-92.92527 Y26.17072 G01 X-92.86007 Y26.12716 G01 X-92.55700 Y25.87844 G01 X-92.52791 Y25.85208 G01 X-87.86292 Y21.18709 G01 X-87.83656 Y21.15800 G01 X-87.58784 Y20.85493 G01 X-87.54428 Y20.78973 G01 X-87.35947 Y20.44396 G01 X-87.32945 Y20.37149 G01 X-87.21563 Y19.99631 G01 X-87.20034 Y19.91942 G01 X-87.16191 Y19.52923 G01 X-87.15998 Y19.49001 G01 X-87.15998 Y17.66502 G01 X-73.10410 Y17.66502 G01 X-69.99705 Y20.77208 G01 X-69.96796 Y20.79844 G01 X-69.66489 Y21.04716 G01 X-69.59969 Y21.09072 G01 X-69.25392 Y21.27553 G01 X-69.18148 Y21.30555 G01 X-68.80627 Y21.41937 G01 X-68.72938 Y21.43466 G01 X-68.33919 Y21.47309 G01 X-68.26078 Y21.47309 G01 X-67.87058 Y21.43466 G01 X-67.79370 Y21.41937 G01 X-67.41852 Y21.30555 G01 X-67.34605 Y21.27553 G01 X-67.00028 Y21.09072 G01 X-66.93508 Y21.04716 G01 X-66.63200 Y20.79844 G01 X-66.57656 Y20.74299 G01 X-66.49995 Y20.64962 G01 X-66.40287 Y20.37832 G01 X-66.38534 Y20.32069 G01 X-66.28715 Y19.92862 G01 X-66.27996 Y19.89265 G01 X-66.22179 Y19.50058 G01 X-66.21946 Y19.47693 G01 X-66.20020 Y19.08483 G01 X-66.20020 Y19.06520 G01 X-66.21946 Y18.67312 G01 X-66.22179 Y18.64947 G01 X-66.27996 Y18.25740 G01 X-66.28715 Y18.22143 G01 X-66.38534 Y17.82936 G01 X-66.40287 Y17.77173 G01 X-66.49998 Y17.50038 G01 X-66.57656 Y17.40703 G01 X-66.60292 Y17.37795 G01 X-70.41292 Y13.56795 G01 X-70.44200 Y13.54158 G01 X-70.74508 Y13.29287 G01 X-70.81028 Y13.24931 G01 X-71.15605 Y13.06450 G01 X-71.22852 Y13.03447 G01 X-71.60370 Y12.92066 G01 X-71.68058 Y12.90537 G01 X-71.76821 Y12.89673 G01 X-72.07078 Y12.86694 G01 X-72.11000 Y12.86500 G01 X-89.56000 Y12.86500 G01 X-89.59919 Y12.86694 G01 X-89.98939 Y12.90537 G01 X-90.06627 Y12.92066 G01 X-90.21728 Y12.96648 G01 X-90.42444 Y13.09063 G01 X-90.48006 Y13.12777 G01 X-90.79843 Y13.36389 G01 X-90.83917 Y13.39731 G01 X-91.13002 Y13.66094 G01 X-91.16406 Y13.69498 G01 X-91.42769 Y13.98583 G01 X-91.46111 Y14.02657 G01 X-91.69723 Y14.34494 G01 X-91.73437 Y14.40056 G01 X-91.85845 Y14.60760 G01 X-92.32116 Y15.07028 G01 X-94.14498 Y16.89413 G01 X-94.14498 Y19.07500 G01 X-94.14691 Y19.11422 G01 X-94.18534 Y19.50441 G01 X-94.20063 Y19.58130 G01 X-94.31445 Y19.95648 G01 X-94.34447 Y20.02895 G01 X-94.52928 Y20.37472 G01 X-94.57284 Y20.43992 G01 X-94.64498 Y20.52783 G01 X-94.64498 Y20.57502 G01 X-94.65267 Y20.65305 G01 X-94.67543 Y20.72808 G01 X-94.71239 Y20.79725 G01 X-94.76215 Y20.85785 G01 X-94.82275 Y20.90761 G01 X-94.89192 Y20.94457 G01 X-94.96695 Y20.96733 G01 X-95.01310 Y20.97187 G01 X-95.04498 Y20.97502 G01 X-95.09217 Y20.97502 G01 X-95.18008 Y21.04716 G01 X-95.24528 Y21.09072 G01 X-95.59105 Y21.27553 G01 X-95.66352 Y21.30555 G01 X-96.03870 Y21.41937 G01 X-96.11559 Y21.43466 G01 X-96.50576 Y21.47309 G01 X-96.58419 Y21.47309 G01 X-96.97439 Y21.43466 G01 X-97.05125 Y21.41937 G01 X-97.42646 Y21.30555 G01 X-97.49892 Y21.27553 G01 X-97.84469 Y21.09072 G01 X-97.90987 Y21.04716 G01 X-97.99780 Y20.97502 G01 X-98.04497 Y20.97502 G01 X-98.12303 Y20.96733 G01 X-98.18706 Y20.94789 G01 X-98.20052 Y20.94322 G01 X-98.25658 Y20.91330 G01 X-98.27238 Y20.90334 G01 X-98.31988 Y20.86438 G01 X-98.33435 Y20.84990 G01 X-98.37324 Y20.80250 G01 X-98.38332 Y20.78648 G01 X-98.41314 Y20.73072 G01 X-98.41807 Y20.71645 G01 X-98.43730 Y20.65305 G01 X-98.44500 Y20.57502 G01 X-98.44500 Y20.52783 G01 X-98.51713 Y20.43992 G01 X-98.56067 Y20.37472 G01 X-98.74550 Y20.02895 G01 X-98.77553 Y19.95648 G01 X-98.88934 Y19.58130 G01 X-98.90461 Y19.50441 G01 X-98.94306 Y19.11422 G01 X-98.94500 Y19.07500 G01 X-98.94500 Y15.90000 G01 X-98.94306 Y15.86081 G01 X-98.90461 Y15.47061 G01 X-98.88934 Y15.39373 G01 X-98.77553 Y15.01854 G01 X-98.74550 Y14.94608 G01 X-98.56067 Y14.60031 G01 X-98.51713 Y14.53511 G01 X-98.26842 Y14.23203 G01 X-98.24205 Y14.20295 G01 X-97.72115 Y13.68207 G01 X-97.74330 Y13.60905 G01 X-97.75099 Y13.53102 G01 X-97.75099 Y13.46102 G01 X-97.77068 Y13.41347 G01 X-97.79912 Y13.31966 G01 X-97.81444 Y13.24275 G01 X-97.82402 Y13.14522 G01 X-97.82402 Y13.06681 G01 X-97.81442 Y12.96925 G01 X-97.79912 Y12.89234 G01 X-97.77068 Y12.79856 G01 X-97.75099 Y12.75101 G01 X-97.75099 Y12.68101 G01 X-97.74330 Y12.60298 G01 X-97.72333 Y12.53717 G01 X-97.71929 Y12.52561 G01 X-97.68945 Y12.46981 G01 X-97.67916 Y12.45342 G01 X-97.64043 Y12.40623 G01 X-97.62577 Y12.39157 G01 X-97.57853 Y12.35281 G01 X-97.56224 Y12.34258 G01 X-97.50634 Y12.31268 G01 X-97.49501 Y12.30872 G01 X-97.42902 Y12.28870 G01 X-97.35099 Y12.28101 G01 X-97.28102 Y12.28101 G01 X-97.23342 Y12.26130 G01 X-97.13961 Y12.23285 G01 X-97.06270 Y12.21753 G01 X-96.96517 Y12.20793 G01 X-96.88676 Y12.20793 G01 X-96.78917 Y12.21756 G01 X-96.71228 Y12.23285 G01 X-96.61851 Y12.26130 G01 X-96.57091 Y12.28101 G01 X-96.50098 Y12.28101 G01 X-96.42293 Y12.28870 G01 X-96.34993 Y12.31085 G01 X-92.52705 Y8.48795 G01 X-92.49797 Y8.46158 G01 X-92.19489 Y8.21287 G01 X-92.12969 Y8.16931 G01 X-91.78392 Y7.98450 G01 X-91.71146 Y7.95447 G01 X-91.33627 Y7.84066 G01 X-91.25939 Y7.82537 G01 X-90.86919 Y7.78694 G01 X-90.83000 Y7.78500 G01 X-74.81500 Y7.78500 G01 X-74.81500 Y7.64500 G01 X-74.81306 Y7.60581 G01 X-74.77463 Y7.21561 G01 X-74.75934 Y7.13873 G01 X-74.64553 Y6.76354 G01 X-74.61550 Y6.69108 G01 X-74.43069 Y6.34531 G01 X-74.38713 Y6.28011 G01 X-74.13842 Y5.97703 G01 X-74.11205 Y5.94795 G01 X-69.03205 Y0.86795 G01 X-69.00297 Y0.84158 G01 X-68.79916 Y0.67435 G01 X-68.69989 Y0.59287 G01 X-68.63469 Y0.54931 G01 X-68.28892 Y0.36450 G01 X-68.21646 Y0.33447 G01 X-67.84127 Y0.22066 G01 X-67.76439 Y0.20537 G01 X-67.37419 Y0.16694 G01 X-67.33500 Y0.16500 G01 X-62.60328 Y0.16500 G01 X-62.56407 Y0.16694 G01 X-62.17387 Y0.20537 G01 X-62.09699 Y0.22066 G01 X-61.72180 Y0.33447 G01 X-61.64934 Y0.36450 G01 X-61.30357 Y0.54931 G01 X-61.23836 Y0.59287 G01 X-60.93529 Y0.84158 G01 X-60.90621 Y0.86795 G01 X-57.36090 Y4.41326 G01 X-57.33454 Y4.44234 G01 X-57.08582 Y4.74541 G01 X-57.04226 Y4.81061 G01 X-56.85745 Y5.15638 G01 X-56.82743 Y5.22885 G01 X-56.71361 Y5.60403 G01 X-56.69832 Y5.68092 G01 X-56.65989 Y6.07111 G01 X-56.65796 Y6.11031 G01 X-56.65796 Y14.51001 G01 X-56.65989 Y14.54923 G01 X-56.69832 Y14.93942 G01 X-56.71361 Y15.01631 G01 X-56.82743 Y15.39149 G01 X-56.85745 Y15.46396 G01 X-57.04226 Y15.80973 G01 X-57.08582 Y15.87493 G01 X-57.33454 Y16.17800 G01 X-57.38999 Y16.23345 G01 X-57.69306 Y16.48217 G01 X-57.75826 Y16.52573 G01 X-58.10403 Y16.71054 G01 X-58.17650 Y16.74056 G01 X-58.35874 Y16.79588 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y16.11732 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y16.11732 G01 X-54.97884 Y16.02631 G01 X-55.03429 Y15.97087 G01 X-55.15867 Y15.81933 G01 X-55.20223 Y15.75415 G01 X-55.29464 Y15.58126 G01 X-55.32464 Y15.50881 G01 X-55.36977 Y15.36005 G01 X-55.37358 Y15.36005 G01 X-55.34650 Y15.46101 G01 X-55.27627 Y15.63058 G01 X-55.18453 Y15.78951 G01 X-55.07279 Y15.93508 G01 X-54.94303 Y16.06485 G01 X-54.86799 Y16.12245 G01 X-54.86799 Y16.11732 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y15.36005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y15.36005 G01 X-52.68944 Y15.46101 G01 X-52.75967 Y15.63053 G01 X-52.85144 Y15.78951 G01 X-52.96315 Y15.93510 G01 X-53.09289 Y16.06485 G01 X-53.16797 Y16.12248 G01 X-53.16797 Y16.11730 G01 X-53.05713 Y16.02631 G01 X-53.00168 Y15.97087 G01 X-52.87732 Y15.81933 G01 X-52.83376 Y15.75415 G01 X-52.74133 Y15.58126 G01 X-52.71133 Y15.50881 G01 X-52.66620 Y15.36005 G01 X-52.66239 Y15.36005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y13.66002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y13.66002 G01 X-52.68944 Y13.55903 G01 X-52.75967 Y13.38951 G01 X-52.85144 Y13.23056 G01 X-52.96315 Y13.08494 G01 X-53.09289 Y12.95520 G01 X-53.16797 Y12.89757 G01 X-53.16797 Y12.90272 G01 X-53.05713 Y12.99371 G01 X-53.00168 Y13.04915 G01 X-52.87732 Y13.20069 G01 X-52.83376 Y13.26589 G01 X-52.74133 Y13.43877 G01 X-52.71133 Y13.51121 G01 X-52.66620 Y13.66002 G01 X-52.66239 Y13.66002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y12.89759 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y12.89759 G01 X-54.94303 Y12.95520 G01 X-55.07279 Y13.08494 G01 X-55.18453 Y13.23056 G01 X-55.27627 Y13.38946 G01 X-55.34650 Y13.55906 G01 X-55.37358 Y13.66002 G01 X-55.36980 Y13.66002 G01 X-55.32464 Y13.51121 G01 X-55.29464 Y13.43877 G01 X-55.20223 Y13.26589 G01 X-55.15867 Y13.20069 G01 X-55.03429 Y13.04915 G01 X-54.97884 Y12.99371 G01 X-54.86799 Y12.90272 G01 X-54.86799 Y12.89759 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y8.61731 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y8.61731 G01 X-54.97884 Y8.52633 G01 X-55.03429 Y8.47088 G01 X-55.15867 Y8.31934 G01 X-55.20223 Y8.25414 G01 X-55.29464 Y8.08124 G01 X-55.32464 Y8.00880 G01 X-55.36977 Y7.86004 G01 X-55.37358 Y7.86004 G01 X-55.34650 Y7.96100 G01 X-55.27627 Y8.13057 G01 X-55.18453 Y8.28950 G01 X-55.07279 Y8.43509 G01 X-54.94303 Y8.56486 G01 X-54.86799 Y8.62247 G01 X-54.86799 Y8.61731 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y7.86004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y7.86004 G01 X-52.68944 Y7.96100 G01 X-52.75967 Y8.13055 G01 X-52.85144 Y8.28950 G01 X-52.96315 Y8.43509 G01 X-53.09289 Y8.56486 G01 X-53.16797 Y8.62247 G01 X-53.16797 Y8.61731 G01 X-53.05713 Y8.52633 G01 X-53.00168 Y8.47088 G01 X-52.87732 Y8.31934 G01 X-52.83376 Y8.25414 G01 X-52.74133 Y8.08124 G01 X-52.71133 Y8.00880 G01 X-52.66620 Y7.86004 G01 X-52.66239 Y7.86004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y5.39761 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y5.39761 G01 X-54.86799 Y5.40271 G01 X-54.97884 Y5.49370 G01 X-55.03429 Y5.54917 G01 X-55.15867 Y5.70071 G01 X-55.20223 Y5.76588 G01 X-55.29464 Y5.93878 G01 X-55.32464 Y6.01122 G01 X-55.36980 Y6.16001 G01 X-55.37358 Y6.16001 G01 X-55.34650 Y6.05905 G01 X-55.27627 Y5.88948 G01 X-55.18453 Y5.73058 G01 X-55.07279 Y5.58498 G01 X-54.94303 Y5.45522 G01 X-54.86799 Y5.39761 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y6.16001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y6.16001 G01 X-52.68944 Y6.05905 G01 X-52.75967 Y5.88950 G01 X-52.85144 Y5.73058 G01 X-52.96315 Y5.58498 G01 X-53.09289 Y5.45522 G01 X-53.16797 Y5.39761 G01 X-53.16797 Y5.40271 G01 X-53.05713 Y5.49370 G01 X-53.00168 Y5.54917 G01 X-52.87732 Y5.70071 G01 X-52.83376 Y5.76588 G01 X-52.74133 Y5.93878 G01 X-52.71133 Y6.01122 G01 X-52.66620 Y6.16001 G01 X-52.66239 Y6.16001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50798 Y13.13084 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50798 Y13.13084 G01 X-39.53168 Y13.13397 G01 X-39.70894 Y13.18149 G01 X-39.87849 Y13.25172 G01 X-40.03744 Y13.34349 G01 X-40.18304 Y13.45520 G01 X-40.31280 Y13.58494 G01 X-40.42451 Y13.73056 G01 X-40.44153 Y13.76002 G01 X-40.43833 Y13.76002 G01 X-40.39866 Y13.70069 G01 X-40.27430 Y13.54915 G01 X-40.21885 Y13.49371 G01 X-40.06731 Y13.36935 G01 X-40.00211 Y13.32579 G01 X-39.82924 Y13.23336 G01 X-39.75677 Y13.20336 G01 X-39.56919 Y13.14646 G01 X-39.50798 Y13.13427 G01 X-39.50798 Y13.13084 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50798 Y15.88575 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50798 Y15.88575 G01 X-39.56919 Y15.87358 G01 X-39.75677 Y15.81666 G01 X-39.82924 Y15.78667 G01 X-40.00211 Y15.69426 G01 X-40.06731 Y15.65070 G01 X-40.21885 Y15.52632 G01 X-40.27430 Y15.47087 G01 X-40.39866 Y15.31933 G01 X-40.43828 Y15.26005 G01 X-40.44153 Y15.26005 G01 X-40.42451 Y15.28951 G01 X-40.31280 Y15.43508 G01 X-40.18304 Y15.56485 G01 X-40.03744 Y15.67658 G01 X-39.87851 Y15.76833 G01 X-39.70894 Y15.83856 G01 X-39.53168 Y15.88608 G01 X-39.50798 Y15.88920 G01 X-39.50798 Y15.88575 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07441 Y13.76002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07441 Y13.76002 G01 X-37.09140 Y13.73059 G01 X-37.20316 Y13.58494 G01 X-37.33290 Y13.45520 G01 X-37.47849 Y13.34349 G01 X-37.63745 Y13.25172 G01 X-37.80697 Y13.18149 G01 X-37.98426 Y13.13399 G01 X-38.00796 Y13.13087 G01 X-38.00796 Y13.13427 G01 X-37.94679 Y13.14646 G01 X-37.75919 Y13.20336 G01 X-37.68675 Y13.23336 G01 X-37.51385 Y13.32579 G01 X-37.44865 Y13.36935 G01 X-37.29711 Y13.49371 G01 X-37.24166 Y13.54915 G01 X-37.11731 Y13.70069 G01 X-37.07766 Y13.76002 G01 X-37.07441 Y13.76002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07441 Y15.26005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07441 Y15.26005 G01 X-37.09140 Y15.28949 G01 X-37.20316 Y15.43508 G01 X-37.33293 Y15.56485 G01 X-37.47849 Y15.67658 G01 X-37.63742 Y15.76833 G01 X-37.80699 Y15.83856 G01 X-37.98426 Y15.88608 G01 X-38.00796 Y15.88920 G01 X-38.00796 Y15.88575 G01 X-37.94679 Y15.87358 G01 X-37.75919 Y15.81666 G01 X-37.68675 Y15.78667 G01 X-37.51385 Y15.69426 G01 X-37.44865 Y15.65070 G01 X-37.29711 Y15.52632 G01 X-37.24166 Y15.47087 G01 X-37.11731 Y15.31933 G01 X-37.07768 Y15.26005 G01 X-37.07441 Y15.26005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.15999 Y15.53292 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.15999 Y15.53292 G01 X-33.31193 Y15.60785 G01 X-33.50809 Y15.73891 G01 X-33.68549 Y15.89451 G01 X-33.84109 Y16.07191 G01 X-33.97215 Y16.26807 G01 X-34.04708 Y16.42001 G01 X-34.04246 Y16.42001 G01 X-33.92681 Y16.20366 G01 X-33.88325 Y16.13846 G01 X-33.70913 Y15.92631 G01 X-33.65369 Y15.87087 G01 X-33.44154 Y15.69675 G01 X-33.37634 Y15.65319 G01 X-33.15999 Y15.53754 G01 X-33.15999 Y15.53292 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-28.26025 Y10.45998 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-28.26025 Y10.45998 G01 X-28.28446 Y10.45264 G01 X-28.35690 Y10.42264 G01 X-28.57300 Y10.30712 G01 X-28.63820 Y10.26356 G01 X-28.82763 Y10.10809 G01 X-28.88306 Y10.05267 G01 X-29.03853 Y9.86323 G01 X-29.08209 Y9.79803 G01 X-29.19761 Y9.58193 G01 X-29.22761 Y9.50949 G01 X-29.29873 Y9.27499 G01 X-29.31404 Y9.19808 G01 X-29.33805 Y8.95422 G01 X-29.33998 Y8.91500 G01 X-29.33998 Y6.57147 G01 X-29.79144 Y6.12001 G01 X-30.70020 Y6.12001 G01 X-30.72715 Y6.15285 G01 X-30.78775 Y6.20261 G01 X-30.85486 Y6.23847 G01 X-30.86502 Y6.24203 G01 X-30.93195 Y6.26233 G01 X-31.00998 Y6.27002 G01 X-33.81000 Y6.27002 G01 X-33.88803 Y6.26233 G01 X-33.95470 Y6.24211 G01 X-33.96517 Y6.23842 G01 X-34.03222 Y6.20261 G01 X-34.09283 Y6.15285 G01 X-34.11978 Y6.12001 G01 X-35.53453 Y6.12001 G01 X-36.85800 Y7.44348 G01 X-36.85800 Y8.01002 G01 X-36.86567 Y8.08805 G01 X-36.88589 Y8.15468 G01 X-36.88957 Y8.16519 G01 X-36.91977 Y8.22168 G01 X-36.92963 Y8.23738 G01 X-36.96872 Y8.28503 G01 X-36.98297 Y8.29928 G01 X-37.03062 Y8.33837 G01 X-37.04629 Y8.34822 G01 X-37.10285 Y8.37845 G01 X-37.11309 Y8.38206 G01 X-37.17994 Y8.40233 G01 X-37.25800 Y8.41002 G01 X-37.88972 Y8.41002 G01 X-38.09107 Y8.51764 G01 X-38.16351 Y8.54764 G01 X-38.39800 Y8.61876 G01 X-38.47491 Y8.63408 G01 X-38.71878 Y8.65808 G01 X-38.79719 Y8.65808 G01 X-39.04105 Y8.63408 G01 X-39.11796 Y8.61876 G01 X-39.35245 Y8.54764 G01 X-39.42490 Y8.51764 G01 X-39.62624 Y8.41002 G01 X-40.25799 Y8.41002 G01 X-40.33602 Y8.40233 G01 X-40.40275 Y8.38208 G01 X-40.41316 Y8.37845 G01 X-40.46955 Y8.34830 G01 X-40.48542 Y8.33832 G01 X-40.53289 Y8.29938 G01 X-40.54735 Y8.28493 G01 X-40.58626 Y8.23748 G01 X-40.59632 Y8.22148 G01 X-40.62634 Y8.16532 G01 X-40.63023 Y8.15422 G01 X-40.65029 Y8.08805 G01 X-40.65799 Y8.01002 G01 X-40.65799 Y6.01000 G01 X-40.65029 Y5.93197 G01 X-40.63030 Y5.86603 G01 X-40.62632 Y5.85466 G01 X-40.59645 Y5.79878 G01 X-40.58618 Y5.78244 G01 X-40.54745 Y5.73525 G01 X-40.53274 Y5.72057 G01 X-40.48555 Y5.68183 G01 X-40.46929 Y5.67157 G01 X-40.41329 Y5.64165 G01 X-40.40219 Y5.63776 G01 X-40.33602 Y5.61770 G01 X-40.25799 Y5.61000 G01 X-39.69144 Y5.61000 G01 X-37.38472 Y3.30330 G01 X-37.35563 Y3.27694 G01 X-37.16620 Y3.12146 G01 X-37.10100 Y3.07790 G01 X-36.88490 Y2.96238 G01 X-36.81246 Y2.93241 G01 X-36.57796 Y2.86127 G01 X-36.50105 Y2.84595 G01 X-36.25719 Y2.82195 G01 X-36.21799 Y2.82002 G01 X-34.11978 Y2.82002 G01 X-34.09283 Y2.78717 G01 X-34.03222 Y2.73744 G01 X-33.96532 Y2.70165 G01 X-33.95417 Y2.69777 G01 X-33.88803 Y2.67773 G01 X-33.81000 Y2.67000 G01 X-31.00998 Y2.67000 G01 X-30.93195 Y2.67773 G01 X-30.86558 Y2.69784 G01 X-30.85473 Y2.70163 G01 X-30.78775 Y2.73744 G01 X-30.72715 Y2.78717 G01 X-30.70020 Y2.82002 G01 X-29.10800 Y2.82002 G01 X-29.06878 Y2.82195 G01 X-28.82492 Y2.84595 G01 X-28.74801 Y2.86127 G01 X-28.51351 Y2.93241 G01 X-28.44107 Y2.96238 G01 X-28.22497 Y3.07790 G01 X-28.15977 Y3.12146 G01 X-27.97033 Y3.27694 G01 X-27.94125 Y3.30330 G01 X-26.52325 Y4.72128 G01 X-26.49691 Y4.75039 G01 X-26.34143 Y4.93980 G01 X-26.32325 Y4.96700 G01 X-22.50400 Y4.96700 G01 X-22.46478 Y4.96893 G01 X-22.36725 Y4.97856 G01 X-22.29034 Y4.99385 G01 X-22.19653 Y5.02230 G01 X-22.14893 Y5.04203 G01 X-22.07898 Y5.04203 G01 X-22.00095 Y5.04970 G01 X-21.93474 Y5.06980 G01 X-21.92369 Y5.07368 G01 X-21.86763 Y5.10363 G01 X-21.85147 Y5.11376 G01 X-21.80410 Y5.15265 G01 X-21.78963 Y5.16713 G01 X-21.75066 Y5.21458 G01 X-21.74070 Y5.23045 G01 X-21.71058 Y5.28679 G01 X-21.70685 Y5.29743 G01 X-21.68668 Y5.36398 G01 X-21.67898 Y5.44201 G01 X-21.67898 Y5.51196 G01 X-21.65927 Y5.55956 G01 X-21.63082 Y5.65336 G01 X-21.61553 Y5.73027 G01 X-21.60591 Y5.82781 G01 X-21.60591 Y5.90622 G01 X-21.61553 Y6.00375 G01 X-21.63082 Y6.08066 G01 X-21.65927 Y6.17447 G01 X-21.67898 Y6.22207 G01 X-21.67898 Y6.29202 G01 X-21.68668 Y6.37005 G01 X-21.70692 Y6.43677 G01 X-21.71055 Y6.44719 G01 X-21.74078 Y6.50373 G01 X-21.75061 Y6.51937 G01 X-21.78978 Y6.56707 G01 X-21.80393 Y6.58122 G01 X-21.85163 Y6.62039 G01 X-21.86727 Y6.63022 G01 X-21.92381 Y6.66045 G01 X-21.93423 Y6.66408 G01 X-22.00095 Y6.68432 G01 X-22.07898 Y6.69202 G01 X-22.14893 Y6.69202 G01 X-22.19653 Y6.71173 G01 X-22.29034 Y6.74018 G01 X-22.36725 Y6.75547 G01 X-22.46478 Y6.76509 G01 X-22.50400 Y6.76702 G01 X-26.03998 Y6.76702 G01 X-26.03998 Y8.91500 G01 X-26.04192 Y8.95422 G01 X-26.06592 Y9.19808 G01 X-26.08123 Y9.27499 G01 X-26.15235 Y9.50949 G01 X-26.18235 Y9.58193 G01 X-26.29787 Y9.79803 G01 X-26.34143 Y9.86323 G01 X-26.49691 Y10.05267 G01 X-26.55233 Y10.10809 G01 X-26.74176 Y10.26356 G01 X-26.80696 Y10.30712 G01 X-27.02307 Y10.42264 G01 X-27.09551 Y10.45264 G01 X-27.11966 Y10.45998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-27.11964 Y12.45007 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-27.11964 Y12.45007 G01 X-27.08476 Y12.43138 G01 X-27.01956 Y12.38781 G01 X-26.97958 Y12.35502 G01 X-23.67382 Y12.35502 G01 X-23.58320 Y12.42939 G01 X-23.51799 Y12.47296 G01 X-23.37969 Y12.54690 G01 X-23.30725 Y12.57689 G01 X-23.15716 Y12.62241 G01 X-23.08028 Y12.63773 G01 X-23.00169 Y12.64545 G01 X-22.92419 Y12.65309 G01 X-22.84578 Y12.65309 G01 X-22.68970 Y12.63773 G01 X-22.61281 Y12.62241 G01 X-22.46272 Y12.57689 G01 X-22.39028 Y12.54690 G01 X-22.25198 Y12.47296 G01 X-22.18678 Y12.42939 G01 X-22.06555 Y12.32990 G01 X-22.01010 Y12.27445 G01 X-21.91061 Y12.15322 G01 X-21.86704 Y12.08802 G01 X-21.79310 Y11.94972 G01 X-21.76311 Y11.87727 G01 X-21.71759 Y11.72719 G01 X-21.70227 Y11.65030 G01 X-21.68691 Y11.49422 G01 X-21.68691 Y11.41581 G01 X-21.70227 Y11.25972 G01 X-21.71759 Y11.18284 G01 X-21.76311 Y11.03275 G01 X-21.79310 Y10.96031 G01 X-21.86704 Y10.82201 G01 X-21.91061 Y10.75680 G01 X-22.01010 Y10.63557 G01 X-22.06555 Y10.58012 G01 X-22.18678 Y10.48063 G01 X-22.25198 Y10.43707 G01 X-22.39028 Y10.36313 G01 X-22.46272 Y10.33313 G01 X-22.61281 Y10.28762 G01 X-22.68970 Y10.27230 G01 X-22.84578 Y10.25693 G01 X-22.92419 Y10.25693 G01 X-23.08028 Y10.27230 G01 X-23.15716 Y10.28762 G01 X-23.30725 Y10.33313 G01 X-23.37969 Y10.36313 G01 X-23.51799 Y10.43707 G01 X-23.58320 Y10.48063 G01 X-23.67382 Y10.55500 G01 X-26.97958 Y10.55500 G01 X-27.01956 Y10.52221 G01 X-27.08476 Y10.47865 G01 X-27.11966 Y10.45998 G01 X-27.23541 Y10.44858 G01 X-27.30673 Y10.44502 G01 X-27.35390 Y10.44502 G01 X-27.41646 Y10.44197 G01 X-27.45819 Y10.43786 G01 X-27.51565 Y10.43501 G01 X-27.66338 Y10.43501 G01 X-27.71656 Y10.43504 G01 X-27.86429 Y10.43501 G01 X-27.92174 Y10.43786 G01 X-27.96348 Y10.44197 G01 X-28.02604 Y10.44502 G01 X-28.07320 Y10.44502 G01 X-28.14453 Y10.44858 G01 X-28.26025 Y10.45998 G01 X-28.29523 Y10.47865 G01 X-28.36043 Y10.52221 G01 X-28.47407 Y10.61548 G01 X-28.52951 Y10.67093 G01 X-28.62278 Y10.78457 G01 X-28.66637 Y10.84977 G01 X-28.73566 Y10.97944 G01 X-28.76568 Y11.05188 G01 X-28.80836 Y11.19259 G01 X-28.82365 Y11.26948 G01 X-28.83805 Y11.41581 G01 X-28.83805 Y11.49422 G01 X-28.82365 Y11.64055 G01 X-28.80836 Y11.71743 G01 X-28.76568 Y11.85815 G01 X-28.73566 Y11.93059 G01 X-28.66637 Y12.06026 G01 X-28.62278 Y12.12546 G01 X-28.52951 Y12.23910 G01 X-28.47407 Y12.29455 G01 X-28.36043 Y12.38781 G01 X-28.29523 Y12.43138 G01 X-28.26025 Y12.45007 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-30.77287 Y16.42001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-30.77287 Y16.42001 G01 X-30.77752 Y16.42001 G01 X-30.89316 Y16.20366 G01 X-30.93672 Y16.13846 G01 X-31.11084 Y15.92631 G01 X-31.16629 Y15.87087 G01 X-31.37843 Y15.69675 G01 X-31.44363 Y15.65319 G01 X-31.65996 Y15.53754 G01 X-31.65996 Y15.53292 G01 X-31.50802 Y15.60785 G01 X-31.31186 Y15.73891 G01 X-31.13446 Y15.89451 G01 X-30.97886 Y16.07191 G01 X-30.84780 Y16.26807 G01 X-30.77287 Y16.42001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-27.11966 Y26.96998 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-27.11966 Y26.96998 G01 X-27.09551 Y26.96264 G01 X-27.02307 Y26.93264 G01 X-26.80696 Y26.81712 G01 X-26.74176 Y26.77356 G01 X-26.55233 Y26.61809 G01 X-26.49691 Y26.56267 G01 X-26.34143 Y26.37323 G01 X-26.29787 Y26.30803 G01 X-26.18235 Y26.09193 G01 X-26.15235 Y26.01949 G01 X-26.08123 Y25.78499 G01 X-26.06592 Y25.70808 G01 X-26.04192 Y25.46422 G01 X-26.03998 Y25.42500 G01 X-26.03998 Y23.15002 G01 X-23.13900 Y23.15002 G01 X-23.09978 Y23.14809 G01 X-23.00225 Y23.13847 G01 X-22.92534 Y23.12318 G01 X-22.83153 Y23.09473 G01 X-22.78393 Y23.07502 G01 X-22.71398 Y23.07502 G01 X-22.63595 Y23.06732 G01 X-22.56092 Y23.04456 G01 X-22.49176 Y23.00761 G01 X-22.43115 Y22.95785 G01 X-22.38139 Y22.89724 G01 X-22.34444 Y22.82808 G01 X-22.32168 Y22.75305 G01 X-22.31398 Y22.67502 G01 X-22.31398 Y22.60507 G01 X-22.29427 Y22.55747 G01 X-22.26582 Y22.46366 G01 X-22.25053 Y22.38675 G01 X-22.24091 Y22.28922 G01 X-22.24091 Y22.21081 G01 X-22.25053 Y22.11327 G01 X-22.26488 Y22.04103 G01 X-22.26582 Y22.03636 G01 X-22.29427 Y21.94256 G01 X-22.31398 Y21.89496 G01 X-22.31398 Y21.82501 G01 X-22.32168 Y21.74698 G01 X-22.34444 Y21.67195 G01 X-22.38139 Y21.60278 G01 X-22.42854 Y21.54533 G01 X-22.43522 Y21.53883 G01 X-22.48652 Y21.49674 G01 X-22.50253 Y21.48668 G01 X-22.55869 Y21.45666 G01 X-22.56976 Y21.45277 G01 X-22.63595 Y21.43270 G01 X-22.71398 Y21.42501 G01 X-22.78393 Y21.42501 G01 X-22.83153 Y21.40530 G01 X-22.92534 Y21.37685 G01 X-23.00225 Y21.36156 G01 X-23.09978 Y21.35193 G01 X-23.13900 Y21.35000 G01 X-26.32325 Y21.35000 G01 X-26.34143 Y21.32280 G01 X-26.49691 Y21.13337 G01 X-26.52325 Y21.10428 G01 X-27.81425 Y19.81328 G01 X-27.84333 Y19.78694 G01 X-28.03277 Y19.63146 G01 X-28.09797 Y19.58790 G01 X-28.31407 Y19.47238 G01 X-28.38651 Y19.44239 G01 X-28.62101 Y19.37127 G01 X-28.69792 Y19.35595 G01 X-28.94178 Y19.33195 G01 X-28.98100 Y19.33002 G01 X-30.70020 Y19.33002 G01 X-30.72715 Y19.29717 G01 X-30.78775 Y19.24742 G01 X-30.85692 Y19.21046 G01 X-30.93195 Y19.18770 G01 X-31.00998 Y19.18000 G01 X-33.81000 Y19.18000 G01 X-33.88803 Y19.18770 G01 X-33.96306 Y19.21046 G01 X-34.03222 Y19.24742 G01 X-34.09283 Y19.29717 G01 X-34.11978 Y19.33002 G01 X-36.22000 Y19.33002 G01 X-36.25919 Y19.33195 G01 X-36.50306 Y19.35595 G01 X-36.57997 Y19.37127 G01 X-36.81446 Y19.44239 G01 X-36.88690 Y19.47238 G01 X-37.10301 Y19.58790 G01 X-37.16821 Y19.63146 G01 X-37.35764 Y19.78694 G01 X-37.38672 Y19.81328 G01 X-39.69345 Y22.12000 G01 X-40.26000 Y22.12000 G01 X-40.33803 Y22.12770 G01 X-40.40419 Y22.14776 G01 X-40.41529 Y22.15165 G01 X-40.47127 Y22.18157 G01 X-40.48756 Y22.19181 G01 X-40.53477 Y22.23057 G01 X-40.54943 Y22.24520 G01 X-40.58824 Y22.29249 G01 X-40.59838 Y22.30865 G01 X-40.62835 Y22.36468 G01 X-40.63223 Y22.37583 G01 X-40.65230 Y22.44197 G01 X-40.66000 Y22.52000 G01 X-40.66000 Y24.52002 G01 X-40.65230 Y24.59805 G01 X-40.63218 Y24.66440 G01 X-40.62837 Y24.67527 G01 X-40.59833 Y24.73148 G01 X-40.58827 Y24.74751 G01 X-40.54935 Y24.79493 G01 X-40.53490 Y24.80938 G01 X-40.48743 Y24.84832 G01 X-40.47155 Y24.85830 G01 X-40.41517 Y24.88845 G01 X-40.40475 Y24.89208 G01 X-40.33803 Y24.91233 G01 X-40.26000 Y24.92002 G01 X-39.62825 Y24.92002 G01 X-39.42690 Y25.02764 G01 X-39.35446 Y25.05764 G01 X-39.11997 Y25.12876 G01 X-39.04306 Y25.14408 G01 X-38.79919 Y25.16808 G01 X-38.72078 Y25.16808 G01 X-38.47692 Y25.14408 G01 X-38.40001 Y25.12876 G01 X-38.16551 Y25.05764 G01 X-38.09307 Y25.02764 G01 X-37.89173 Y24.92002 G01 X-37.25998 Y24.92002 G01 X-37.18195 Y24.91233 G01 X-37.11505 Y24.89203 G01 X-37.10486 Y24.88848 G01 X-37.04824 Y24.85820 G01 X-37.03265 Y24.84839 G01 X-36.98495 Y24.80925 G01 X-36.97075 Y24.79505 G01 X-36.93161 Y24.74735 G01 X-36.92178 Y24.73173 G01 X-36.89153 Y24.67514 G01 X-36.88797 Y24.66496 G01 X-36.86767 Y24.59805 G01 X-36.85998 Y24.52002 G01 X-36.85998 Y23.95348 G01 X-35.53654 Y22.63001 G01 X-34.11978 Y22.63001 G01 X-34.09283 Y22.66285 G01 X-34.03222 Y22.71261 G01 X-33.96517 Y22.74842 G01 X-33.95470 Y22.75211 G01 X-33.88803 Y22.77233 G01 X-33.81000 Y22.78002 G01 X-31.00998 Y22.78002 G01 X-30.93195 Y22.77233 G01 X-30.86502 Y22.75203 G01 X-30.85486 Y22.74847 G01 X-30.78775 Y22.71261 G01 X-30.72715 Y22.66285 G01 X-30.70020 Y22.63001 G01 X-29.66444 Y22.63001 G01 X-29.33998 Y22.95447 G01 X-29.33998 Y25.42500 G01 X-29.33805 Y25.46422 G01 X-29.31404 Y25.70808 G01 X-29.29873 Y25.78499 G01 X-29.22761 Y26.01949 G01 X-29.19761 Y26.09193 G01 X-29.08209 Y26.30803 G01 X-29.03853 Y26.37323 G01 X-28.88306 Y26.56267 G01 X-28.82763 Y26.61809 G01 X-28.63820 Y26.77356 G01 X-28.57300 Y26.81712 G01 X-28.35690 Y26.93264 G01 X-28.28446 Y26.96264 G01 X-28.26025 Y26.96998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-27.11964 Y28.96007 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-27.11964 Y28.96007 G01 X-27.08476 Y28.94138 G01 X-27.01956 Y28.89781 G01 X-26.97958 Y28.86502 G01 X-23.67382 Y28.86502 G01 X-23.58320 Y28.93939 G01 X-23.51799 Y28.98296 G01 X-23.37969 Y29.05690 G01 X-23.30725 Y29.08689 G01 X-23.15716 Y29.13241 G01 X-23.08028 Y29.14773 G01 X-22.92419 Y29.16309 G01 X-22.84578 Y29.16309 G01 X-22.68970 Y29.14773 G01 X-22.61281 Y29.13241 G01 X-22.46272 Y29.08689 G01 X-22.39028 Y29.05690 G01 X-22.25198 Y28.98296 G01 X-22.18678 Y28.93939 G01 X-22.06555 Y28.83990 G01 X-22.01010 Y28.78445 G01 X-21.91061 Y28.66322 G01 X-21.86704 Y28.59802 G01 X-21.79310 Y28.45972 G01 X-21.78322 Y28.43581 G01 X-21.76311 Y28.38727 G01 X-21.71759 Y28.23719 G01 X-21.70227 Y28.16030 G01 X-21.68691 Y28.00422 G01 X-21.68691 Y27.92581 G01 X-21.70227 Y27.76972 G01 X-21.71759 Y27.69284 G01 X-21.76311 Y27.54275 G01 X-21.79310 Y27.47031 G01 X-21.86704 Y27.33201 G01 X-21.91061 Y27.26680 G01 X-22.01010 Y27.14557 G01 X-22.06555 Y27.09012 G01 X-22.18678 Y26.99063 G01 X-22.25198 Y26.94707 G01 X-22.39028 Y26.87313 G01 X-22.46272 Y26.84313 G01 X-22.61281 Y26.79762 G01 X-22.68970 Y26.78230 G01 X-22.84578 Y26.76693 G01 X-22.92419 Y26.76693 G01 X-23.08028 Y26.78230 G01 X-23.15716 Y26.79762 G01 X-23.30725 Y26.84313 G01 X-23.37969 Y26.87313 G01 X-23.51799 Y26.94707 G01 X-23.58320 Y26.99063 G01 X-23.67382 Y27.06500 G01 X-26.97958 Y27.06500 G01 X-27.01956 Y27.03221 G01 X-27.08476 Y26.98865 G01 X-27.11966 Y26.96998 G01 X-27.23541 Y26.95858 G01 X-27.30673 Y26.95502 G01 X-27.35390 Y26.95502 G01 X-27.41646 Y26.95197 G01 X-27.45819 Y26.94786 G01 X-27.51565 Y26.94501 G01 X-27.86429 Y26.94501 G01 X-27.92174 Y26.94786 G01 X-27.96348 Y26.95197 G01 X-28.02604 Y26.95502 G01 X-28.07320 Y26.95502 G01 X-28.14453 Y26.95858 G01 X-28.26025 Y26.96998 G01 X-28.29523 Y26.98865 G01 X-28.36043 Y27.03221 G01 X-28.47407 Y27.12548 G01 X-28.52951 Y27.18093 G01 X-28.62278 Y27.29457 G01 X-28.66637 Y27.35977 G01 X-28.73566 Y27.48944 G01 X-28.76568 Y27.56188 G01 X-28.80836 Y27.70259 G01 X-28.82365 Y27.77948 G01 X-28.83805 Y27.92581 G01 X-28.83805 Y28.00422 G01 X-28.82365 Y28.15055 G01 X-28.80836 Y28.22743 G01 X-28.76568 Y28.36815 G01 X-28.73566 Y28.44059 G01 X-28.66637 Y28.57026 G01 X-28.62278 Y28.63546 G01 X-28.52951 Y28.74910 G01 X-28.47407 Y28.80455 G01 X-28.36043 Y28.89781 G01 X-28.29523 Y28.94138 G01 X-28.26025 Y28.96007 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-30.77287 Y32.93001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-30.77287 Y32.93001 G01 X-30.77752 Y32.93001 G01 X-30.89316 Y32.71366 G01 X-30.93672 Y32.64846 G01 X-31.11084 Y32.43631 G01 X-31.16629 Y32.38087 G01 X-31.37843 Y32.20675 G01 X-31.44363 Y32.16319 G01 X-31.65996 Y32.04754 G01 X-31.65996 Y32.04292 G01 X-31.50802 Y32.11785 G01 X-31.31186 Y32.24891 G01 X-31.13446 Y32.40451 G01 X-30.97886 Y32.58191 G01 X-30.84780 Y32.77807 G01 X-30.77287 Y32.93001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.15999 Y32.04292 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.15999 Y32.04292 G01 X-33.15999 Y32.04754 G01 X-33.37634 Y32.16319 G01 X-33.44154 Y32.20675 G01 X-33.65369 Y32.38087 G01 X-33.70913 Y32.43631 G01 X-33.88325 Y32.64846 G01 X-33.92681 Y32.71366 G01 X-34.04246 Y32.93001 G01 X-34.04708 Y32.93001 G01 X-33.97215 Y32.77807 G01 X-33.84109 Y32.58191 G01 X-33.68549 Y32.40451 G01 X-33.50809 Y32.24891 G01 X-33.31193 Y32.11785 G01 X-33.15999 Y32.04292 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07641 Y30.27002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07641 Y30.27002 G01 X-37.07966 Y30.27002 G01 X-37.11931 Y30.21069 G01 X-37.24367 Y30.05915 G01 X-37.29912 Y30.00371 G01 X-37.45066 Y29.87935 G01 X-37.51586 Y29.83579 G01 X-37.68875 Y29.74336 G01 X-37.76120 Y29.71336 G01 X-37.94877 Y29.65646 G01 X-38.00996 Y29.64427 G01 X-38.00996 Y29.64087 G01 X-37.98627 Y29.64399 G01 X-37.80897 Y29.69149 G01 X-37.63945 Y29.76172 G01 X-37.48050 Y29.85349 G01 X-37.33491 Y29.96520 G01 X-37.20514 Y30.09494 G01 X-37.09343 Y30.24056 G01 X-37.07641 Y30.27002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07641 Y31.77005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07641 Y31.77005 G01 X-37.07969 Y31.77005 G01 X-37.11931 Y31.82933 G01 X-37.24367 Y31.98087 G01 X-37.29912 Y32.03632 G01 X-37.45066 Y32.16070 G01 X-37.51586 Y32.20426 G01 X-37.68875 Y32.29667 G01 X-37.76120 Y32.32666 G01 X-37.94877 Y32.38358 G01 X-38.00996 Y32.39575 G01 X-38.00996 Y32.39920 G01 X-37.98627 Y32.39608 G01 X-37.80900 Y32.34856 G01 X-37.63943 Y32.27833 G01 X-37.48050 Y32.18658 G01 X-37.33491 Y32.07485 G01 X-37.20514 Y31.94508 G01 X-37.09343 Y31.79951 G01 X-37.07641 Y31.77005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50999 Y29.64084 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50999 Y29.64084 G01 X-39.50999 Y29.64427 G01 X-39.57120 Y29.65646 G01 X-39.75878 Y29.71336 G01 X-39.83122 Y29.74336 G01 X-40.00412 Y29.83579 G01 X-40.06932 Y29.87935 G01 X-40.22086 Y30.00371 G01 X-40.27630 Y30.05915 G01 X-40.40066 Y30.21069 G01 X-40.44031 Y30.27002 G01 X-40.44354 Y30.27002 G01 X-40.42652 Y30.24056 G01 X-40.31481 Y30.09494 G01 X-40.18504 Y29.96520 G01 X-40.03945 Y29.85349 G01 X-39.88050 Y29.76172 G01 X-39.71093 Y29.69149 G01 X-39.53366 Y29.64397 G01 X-39.50999 Y29.64084 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50999 Y32.39575 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50999 Y32.39575 G01 X-39.50999 Y32.39920 G01 X-39.53366 Y32.39608 G01 X-39.71093 Y32.34856 G01 X-39.88052 Y32.27833 G01 X-40.03945 Y32.18658 G01 X-40.18504 Y32.07485 G01 X-40.31481 Y31.94508 G01 X-40.42652 Y31.79951 G01 X-40.44354 Y31.77005 G01 X-40.44029 Y31.77005 G01 X-40.40066 Y31.82933 G01 X-40.27630 Y31.98087 G01 X-40.22086 Y32.03632 G01 X-40.06932 Y32.16070 G01 X-40.00412 Y32.20426 G01 X-39.83122 Y32.29667 G01 X-39.75878 Y32.32666 G01 X-39.57120 Y32.38358 G01 X-39.50999 Y32.39575 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-28.26025 Y43.47998 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-28.26025 Y43.47998 G01 X-28.28446 Y43.47264 G01 X-28.35690 Y43.44264 G01 X-28.57300 Y43.32712 G01 X-28.63820 Y43.28356 G01 X-28.82763 Y43.12809 G01 X-28.88306 Y43.07267 G01 X-29.03853 Y42.88323 G01 X-29.08209 Y42.81803 G01 X-29.19761 Y42.60193 G01 X-29.22761 Y42.52949 G01 X-29.29873 Y42.29499 G01 X-29.31404 Y42.21808 G01 X-29.33805 Y41.97422 G01 X-29.33998 Y41.93500 G01 X-29.33998 Y39.71847 G01 X-29.91844 Y39.14001 G01 X-30.70020 Y39.14001 G01 X-30.72715 Y39.17285 G01 X-30.78775 Y39.22261 G01 X-30.85486 Y39.25847 G01 X-30.86502 Y39.26203 G01 X-30.93195 Y39.28233 G01 X-31.00998 Y39.29002 G01 X-31.87652 Y39.29002 G01 X-33.78325 Y41.19675 G01 X-33.81233 Y41.22309 G01 X-34.00177 Y41.37856 G01 X-34.06697 Y41.42212 G01 X-34.28307 Y41.53764 G01 X-34.35551 Y41.56764 G01 X-34.59001 Y41.63876 G01 X-34.66692 Y41.65408 G01 X-34.91078 Y41.67808 G01 X-34.95000 Y41.68001 G01 X-38.75799 Y41.68001 G01 X-38.79719 Y41.67808 G01 X-39.04105 Y41.65408 G01 X-39.11796 Y41.63876 G01 X-39.35245 Y41.56764 G01 X-39.42490 Y41.53764 G01 X-39.62624 Y41.43002 G01 X-40.25799 Y41.43002 G01 X-40.33602 Y41.42233 G01 X-40.40275 Y41.40208 G01 X-40.41316 Y41.39845 G01 X-40.46955 Y41.36830 G01 X-40.48542 Y41.35832 G01 X-40.53289 Y41.31938 G01 X-40.54735 Y41.30493 G01 X-40.58626 Y41.25748 G01 X-40.59632 Y41.24148 G01 X-40.62634 Y41.18532 G01 X-40.63023 Y41.17422 G01 X-40.65029 Y41.10805 G01 X-40.65799 Y41.03002 G01 X-40.65799 Y39.03000 G01 X-40.65029 Y38.95197 G01 X-40.63028 Y38.88598 G01 X-40.62632 Y38.87466 G01 X-40.59642 Y38.81872 G01 X-40.58621 Y38.80247 G01 X-40.54745 Y38.75525 G01 X-40.53274 Y38.74054 G01 X-40.48555 Y38.70181 G01 X-40.46929 Y38.69157 G01 X-40.41329 Y38.66165 G01 X-40.40219 Y38.65776 G01 X-40.33602 Y38.63770 G01 X-40.25799 Y38.63000 G01 X-39.62624 Y38.63000 G01 X-39.42490 Y38.52238 G01 X-39.35245 Y38.49239 G01 X-39.11796 Y38.42127 G01 X-39.04105 Y38.40595 G01 X-38.79719 Y38.38195 G01 X-38.75799 Y38.38002 G01 X-35.63344 Y38.38002 G01 X-34.21000 Y36.95655 G01 X-34.21000 Y36.09000 G01 X-34.20230 Y36.01197 G01 X-34.18223 Y35.94583 G01 X-34.17835 Y35.93468 G01 X-34.14838 Y35.87865 G01 X-34.13822 Y35.86249 G01 X-34.09940 Y35.81517 G01 X-34.08483 Y35.80060 G01 X-34.04101 Y35.76465 G01 X-33.99836 Y35.73933 G01 X-33.96306 Y35.72046 G01 X-33.88803 Y35.69770 G01 X-33.81000 Y35.69000 G01 X-31.00998 Y35.69000 G01 X-30.93195 Y35.69770 G01 X-30.85692 Y35.72046 G01 X-30.78775 Y35.75742 G01 X-30.72715 Y35.80717 G01 X-30.70020 Y35.84002 G01 X-29.23500 Y35.84002 G01 X-29.19578 Y35.84195 G01 X-28.95192 Y35.86595 G01 X-28.87501 Y35.88127 G01 X-28.64051 Y35.95239 G01 X-28.56807 Y35.98238 G01 X-28.35197 Y36.09790 G01 X-28.28677 Y36.14146 G01 X-28.09733 Y36.29694 G01 X-28.06825 Y36.32328 G01 X-26.52325 Y37.86828 G01 X-26.49691 Y37.89737 G01 X-26.34143 Y38.08680 G01 X-26.32325 Y38.11400 G01 X-23.26600 Y38.11400 G01 X-23.22678 Y38.11593 G01 X-23.12925 Y38.12556 G01 X-23.05234 Y38.14085 G01 X-22.95853 Y38.16930 G01 X-22.91093 Y38.18901 G01 X-22.84098 Y38.18901 G01 X-22.76295 Y38.19670 G01 X-22.69676 Y38.21677 G01 X-22.68569 Y38.22066 G01 X-22.62953 Y38.25065 G01 X-22.61350 Y38.26074 G01 X-22.56605 Y38.29968 G01 X-22.55165 Y38.31408 G01 X-22.50903 Y38.36602 G01 X-22.50786 Y38.36777 G01 X-22.47144 Y38.43595 G01 X-22.44868 Y38.51098 G01 X-22.44098 Y38.58901 G01 X-22.44098 Y38.65896 G01 X-22.42127 Y38.70656 G01 X-22.39282 Y38.80036 G01 X-22.37753 Y38.87727 G01 X-22.37273 Y38.92576 G01 X-22.36791 Y38.97481 G01 X-22.36791 Y39.05322 G01 X-22.37753 Y39.15075 G01 X-22.39282 Y39.22766 G01 X-22.42127 Y39.32147 G01 X-22.44098 Y39.36907 G01 X-22.44098 Y39.43902 G01 X-22.44868 Y39.51705 G01 X-22.47144 Y39.59208 G01 X-22.50839 Y39.66124 G01 X-22.55815 Y39.72185 G01 X-22.61876 Y39.77161 G01 X-22.68792 Y39.80856 G01 X-22.76295 Y39.83132 G01 X-22.84098 Y39.83902 G01 X-22.91093 Y39.83902 G01 X-22.95853 Y39.85873 G01 X-23.05234 Y39.88718 G01 X-23.12925 Y39.90247 G01 X-23.22678 Y39.91209 G01 X-23.26600 Y39.91402 G01 X-26.03998 Y39.91402 G01 X-26.03998 Y41.93500 G01 X-26.04192 Y41.97422 G01 X-26.06592 Y42.21808 G01 X-26.08123 Y42.29499 G01 X-26.15235 Y42.52949 G01 X-26.18235 Y42.60193 G01 X-26.29787 Y42.81803 G01 X-26.34143 Y42.88323 G01 X-26.49691 Y43.07267 G01 X-26.55233 Y43.12809 G01 X-26.74176 Y43.28356 G01 X-26.80696 Y43.32712 G01 X-27.02307 Y43.44264 G01 X-27.09551 Y43.47264 G01 X-27.11966 Y43.47998 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-27.11964 Y45.47007 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-27.11964 Y45.47007 G01 X-27.08476 Y45.45138 G01 X-27.01956 Y45.40781 G01 X-26.97958 Y45.37502 G01 X-23.67382 Y45.37502 G01 X-23.58320 Y45.44939 G01 X-23.51799 Y45.49296 G01 X-23.37969 Y45.56690 G01 X-23.30725 Y45.59689 G01 X-23.15716 Y45.64241 G01 X-23.08028 Y45.65773 G01 X-22.92419 Y45.67309 G01 X-22.84578 Y45.67309 G01 X-22.68970 Y45.65773 G01 X-22.61281 Y45.64241 G01 X-22.46272 Y45.59689 G01 X-22.39028 Y45.56690 G01 X-22.25198 Y45.49296 G01 X-22.18678 Y45.44939 G01 X-22.06555 Y45.34990 G01 X-22.01010 Y45.29445 G01 X-21.91061 Y45.17322 G01 X-21.86704 Y45.10802 G01 X-21.79310 Y44.96972 G01 X-21.78322 Y44.94581 G01 X-21.76311 Y44.89727 G01 X-21.71759 Y44.74719 G01 X-21.70227 Y44.67030 G01 X-21.68691 Y44.51422 G01 X-21.68691 Y44.43581 G01 X-21.70227 Y44.27972 G01 X-21.71759 Y44.20284 G01 X-21.76311 Y44.05275 G01 X-21.79310 Y43.98031 G01 X-21.86704 Y43.84201 G01 X-21.91061 Y43.77680 G01 X-22.01010 Y43.65557 G01 X-22.06555 Y43.60012 G01 X-22.18678 Y43.50063 G01 X-22.25198 Y43.45707 G01 X-22.39028 Y43.38313 G01 X-22.46272 Y43.35313 G01 X-22.61281 Y43.30762 G01 X-22.68970 Y43.29230 G01 X-22.84578 Y43.27693 G01 X-22.92419 Y43.27693 G01 X-23.08028 Y43.29230 G01 X-23.15716 Y43.30762 G01 X-23.30725 Y43.35313 G01 X-23.37969 Y43.38313 G01 X-23.51799 Y43.45707 G01 X-23.58320 Y43.50063 G01 X-23.67382 Y43.57500 G01 X-26.97958 Y43.57500 G01 X-27.01956 Y43.54221 G01 X-27.08476 Y43.49865 G01 X-27.11966 Y43.47998 G01 X-27.23541 Y43.46858 G01 X-27.30673 Y43.46502 G01 X-27.35390 Y43.46502 G01 X-27.41646 Y43.46197 G01 X-27.45819 Y43.45786 G01 X-27.51565 Y43.45501 G01 X-27.86429 Y43.45501 G01 X-27.92174 Y43.45786 G01 X-27.96348 Y43.46197 G01 X-28.02604 Y43.46502 G01 X-28.07320 Y43.46502 G01 X-28.14453 Y43.46858 G01 X-28.26025 Y43.47998 G01 X-28.29523 Y43.49865 G01 X-28.36043 Y43.54221 G01 X-28.47407 Y43.63548 G01 X-28.52951 Y43.69093 G01 X-28.62278 Y43.80457 G01 X-28.66637 Y43.86977 G01 X-28.73566 Y43.99944 G01 X-28.76568 Y44.07188 G01 X-28.80836 Y44.21259 G01 X-28.82365 Y44.28948 G01 X-28.83805 Y44.43581 G01 X-28.83805 Y44.51422 G01 X-28.82365 Y44.66055 G01 X-28.80836 Y44.73743 G01 X-28.76568 Y44.87815 G01 X-28.73566 Y44.95059 G01 X-28.66637 Y45.08026 G01 X-28.62278 Y45.14546 G01 X-28.52951 Y45.25910 G01 X-28.47407 Y45.31455 G01 X-28.36043 Y45.40781 G01 X-28.29523 Y45.45138 G01 X-28.26025 Y45.47007 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-30.77287 Y49.44001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-30.77287 Y49.44001 G01 X-30.77752 Y49.44001 G01 X-30.89316 Y49.22366 G01 X-30.93672 Y49.15846 G01 X-31.11084 Y48.94631 G01 X-31.16629 Y48.89087 G01 X-31.37843 Y48.71675 G01 X-31.44363 Y48.67319 G01 X-31.65996 Y48.55754 G01 X-31.65996 Y48.55292 G01 X-31.50802 Y48.62785 G01 X-31.31186 Y48.75891 G01 X-31.13446 Y48.91451 G01 X-30.97886 Y49.09191 G01 X-30.84780 Y49.28807 G01 X-30.77287 Y49.44001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-33.15999 Y48.55292 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-33.15999 Y48.55292 G01 X-33.15999 Y48.55754 G01 X-33.37634 Y48.67319 G01 X-33.44154 Y48.71675 G01 X-33.65369 Y48.89087 G01 X-33.70913 Y48.94631 G01 X-33.88325 Y49.15846 G01 X-33.92681 Y49.22366 G01 X-34.04246 Y49.44001 G01 X-34.04708 Y49.44001 G01 X-33.97215 Y49.28807 G01 X-33.84109 Y49.09191 G01 X-33.68549 Y48.91451 G01 X-33.50809 Y48.75891 G01 X-33.31193 Y48.62785 G01 X-33.15999 Y48.55292 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07441 Y46.78002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07441 Y46.78002 G01 X-37.07766 Y46.78002 G01 X-37.11731 Y46.72069 G01 X-37.24166 Y46.56915 G01 X-37.29711 Y46.51371 G01 X-37.44865 Y46.38935 G01 X-37.51385 Y46.34579 G01 X-37.68675 Y46.25336 G01 X-37.75919 Y46.22336 G01 X-37.94679 Y46.16646 G01 X-38.00796 Y46.15427 G01 X-38.00796 Y46.15087 G01 X-37.98426 Y46.15399 G01 X-37.80697 Y46.20149 G01 X-37.63745 Y46.27172 G01 X-37.47849 Y46.36349 G01 X-37.33290 Y46.47520 G01 X-37.20316 Y46.60494 G01 X-37.09140 Y46.75059 G01 X-37.07441 Y46.78002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-37.07441 Y48.28005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-37.07441 Y48.28005 G01 X-37.07768 Y48.28005 G01 X-37.11731 Y48.33933 G01 X-37.24166 Y48.49087 G01 X-37.29711 Y48.54632 G01 X-37.44865 Y48.67070 G01 X-37.51385 Y48.71426 G01 X-37.68675 Y48.80667 G01 X-37.75919 Y48.83666 G01 X-37.94679 Y48.89358 G01 X-38.00796 Y48.90575 G01 X-38.00796 Y48.90920 G01 X-37.98426 Y48.90608 G01 X-37.80699 Y48.85856 G01 X-37.63742 Y48.78833 G01 X-37.47849 Y48.69658 G01 X-37.33293 Y48.58485 G01 X-37.20316 Y48.45508 G01 X-37.09140 Y48.30949 G01 X-37.07441 Y48.28005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50798 Y46.15084 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50798 Y46.15084 G01 X-39.50798 Y46.15427 G01 X-39.56919 Y46.16646 G01 X-39.75677 Y46.22336 G01 X-39.82924 Y46.25336 G01 X-40.00211 Y46.34579 G01 X-40.06731 Y46.38935 G01 X-40.21885 Y46.51371 G01 X-40.27430 Y46.56915 G01 X-40.39866 Y46.72069 G01 X-40.43833 Y46.78002 G01 X-40.44153 Y46.78002 G01 X-40.42451 Y46.75056 G01 X-40.31280 Y46.60494 G01 X-40.18304 Y46.47520 G01 X-40.03744 Y46.36349 G01 X-39.87849 Y46.27172 G01 X-39.70894 Y46.20149 G01 X-39.53168 Y46.15397 G01 X-39.50798 Y46.15084 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-39.50798 Y48.90575 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-39.50798 Y48.90575 G01 X-39.50798 Y48.90920 G01 X-39.53168 Y48.90608 G01 X-39.70894 Y48.85856 G01 X-39.87851 Y48.78833 G01 X-40.03744 Y48.69658 G01 X-40.18304 Y48.58485 G01 X-40.31280 Y48.45508 G01 X-40.42451 Y48.30951 G01 X-40.44153 Y48.28005 G01 X-40.43828 Y48.28005 G01 X-40.39866 Y48.33933 G01 X-40.27430 Y48.49087 G01 X-40.21885 Y48.54632 G01 X-40.06731 Y48.67070 G01 X-40.00211 Y48.71426 G01 X-39.82924 Y48.80667 G01 X-39.75677 Y48.83666 G01 X-39.56919 Y48.89358 G01 X-39.50798 Y48.90575 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y48.38005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y48.38005 G01 X-52.66620 Y48.38005 G01 X-52.71133 Y48.52881 G01 X-52.74133 Y48.60126 G01 X-52.83376 Y48.77415 G01 X-52.87732 Y48.83933 G01 X-53.00168 Y48.99087 G01 X-53.05713 Y49.04631 G01 X-53.16797 Y49.13730 G01 X-53.16797 Y49.14248 G01 X-53.09289 Y49.08485 G01 X-52.96315 Y48.95510 G01 X-52.85144 Y48.80951 G01 X-52.75967 Y48.65053 G01 X-52.68944 Y48.48101 G01 X-52.66239 Y48.38005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y49.13732 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y49.13732 G01 X-54.86799 Y49.14245 G01 X-54.94303 Y49.08485 G01 X-55.07279 Y48.95508 G01 X-55.18453 Y48.80951 G01 X-55.27627 Y48.65058 G01 X-55.34650 Y48.48101 G01 X-55.37358 Y48.38005 G01 X-55.36977 Y48.38005 G01 X-55.32464 Y48.52881 G01 X-55.29464 Y48.60126 G01 X-55.20223 Y48.77415 G01 X-55.15867 Y48.83933 G01 X-55.03429 Y48.99087 G01 X-54.97884 Y49.04631 G01 X-54.86799 Y49.13732 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y46.68002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y46.68002 G01 X-52.68944 Y46.57903 G01 X-52.75967 Y46.40951 G01 X-52.85144 Y46.25056 G01 X-52.96315 Y46.10494 G01 X-53.09289 Y45.97520 G01 X-53.16797 Y45.91757 G01 X-53.16797 Y45.92272 G01 X-53.05713 Y46.01371 G01 X-53.00168 Y46.06915 G01 X-52.87732 Y46.22069 G01 X-52.83376 Y46.28589 G01 X-52.74133 Y46.45877 G01 X-52.71133 Y46.53121 G01 X-52.66620 Y46.68002 G01 X-52.66239 Y46.68002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y45.91759 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y45.91759 G01 X-54.94303 Y45.97520 G01 X-55.07279 Y46.10494 G01 X-55.18453 Y46.25056 G01 X-55.27627 Y46.40946 G01 X-55.34650 Y46.57906 G01 X-55.37358 Y46.68002 G01 X-55.36980 Y46.68002 G01 X-55.32464 Y46.53121 G01 X-55.29464 Y46.45877 G01 X-55.20223 Y46.28589 G01 X-55.15867 Y46.22069 G01 X-55.03429 Y46.06915 G01 X-54.97884 Y46.01371 G01 X-54.86799 Y45.92272 G01 X-54.86799 Y45.91759 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y41.63731 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y41.63731 G01 X-54.97884 Y41.54633 G01 X-55.03429 Y41.49088 G01 X-55.15867 Y41.33934 G01 X-55.20223 Y41.27414 G01 X-55.29464 Y41.10124 G01 X-55.32464 Y41.02880 G01 X-55.36977 Y40.88004 G01 X-55.37358 Y40.88004 G01 X-55.34650 Y40.98100 G01 X-55.27627 Y41.15057 G01 X-55.18453 Y41.30950 G01 X-55.07279 Y41.45509 G01 X-54.94303 Y41.58486 G01 X-54.86799 Y41.64247 G01 X-54.86799 Y41.63731 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y40.88004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y40.88004 G01 X-52.68944 Y40.98100 G01 X-52.75967 Y41.15055 G01 X-52.85144 Y41.30950 G01 X-52.96315 Y41.45509 G01 X-53.09289 Y41.58486 G01 X-53.16797 Y41.64247 G01 X-53.16797 Y41.63731 G01 X-53.05713 Y41.54633 G01 X-53.00168 Y41.49088 G01 X-52.87732 Y41.33934 G01 X-52.83376 Y41.27414 G01 X-52.74133 Y41.10124 G01 X-52.71133 Y41.02880 G01 X-52.66620 Y40.88004 G01 X-52.66239 Y40.88004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66239 Y39.18001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66239 Y39.18001 G01 X-52.68944 Y39.07905 G01 X-52.75967 Y38.90950 G01 X-52.85144 Y38.75055 G01 X-52.96315 Y38.60496 G01 X-53.09289 Y38.47519 G01 X-53.16797 Y38.41758 G01 X-53.16797 Y38.42271 G01 X-53.05713 Y38.51370 G01 X-53.00168 Y38.56914 G01 X-52.87732 Y38.72068 G01 X-52.83376 Y38.78588 G01 X-52.74133 Y38.95878 G01 X-52.71133 Y39.03122 G01 X-52.66620 Y39.18001 G01 X-52.66239 Y39.18001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86799 Y38.41758 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86799 Y38.41758 G01 X-54.94303 Y38.47519 G01 X-55.07279 Y38.60496 G01 X-55.18453 Y38.75055 G01 X-55.27627 Y38.90948 G01 X-55.34650 Y39.07905 G01 X-55.37358 Y39.18001 G01 X-55.36980 Y39.18001 G01 X-55.32464 Y39.03122 G01 X-55.29464 Y38.95878 G01 X-55.20223 Y38.78588 G01 X-55.15867 Y38.72068 G01 X-55.03429 Y38.56914 G01 X-54.97884 Y38.51370 G01 X-54.86799 Y38.42271 G01 X-54.86799 Y38.41758 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y32.62732 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y32.62732 G01 X-54.86998 Y32.63248 G01 X-54.94506 Y32.57485 G01 X-55.07480 Y32.44510 G01 X-55.18651 Y32.29951 G01 X-55.27828 Y32.14056 G01 X-55.34851 Y31.97104 G01 X-55.37556 Y31.87005 G01 X-55.37178 Y31.87005 G01 X-55.32664 Y32.01881 G01 X-55.29664 Y32.09126 G01 X-55.20421 Y32.26415 G01 X-55.16065 Y32.32933 G01 X-55.03629 Y32.48087 G01 X-54.98085 Y32.53631 G01 X-54.86998 Y32.62732 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y31.87005 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y31.87005 G01 X-52.66820 Y31.87005 G01 X-52.71334 Y32.01881 G01 X-52.74334 Y32.09126 G01 X-52.83574 Y32.26415 G01 X-52.87930 Y32.32933 G01 X-53.00368 Y32.48087 G01 X-53.05913 Y32.53631 G01 X-53.16995 Y32.62730 G01 X-53.16995 Y32.63245 G01 X-53.09492 Y32.57485 G01 X-52.96515 Y32.44508 G01 X-52.85339 Y32.29948 G01 X-52.76165 Y32.14056 G01 X-52.69144 Y31.97101 G01 X-52.66437 Y31.87005 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y30.17002 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y30.17002 G01 X-52.66818 Y30.17002 G01 X-52.71334 Y30.02121 G01 X-52.74334 Y29.94877 G01 X-52.83574 Y29.77589 G01 X-52.87930 Y29.71069 G01 X-53.00368 Y29.55915 G01 X-53.05913 Y29.50371 G01 X-53.16995 Y29.41272 G01 X-53.16995 Y29.40759 G01 X-53.09492 Y29.46520 G01 X-52.96515 Y29.59494 G01 X-52.85339 Y29.74059 G01 X-52.76165 Y29.89949 G01 X-52.69144 Y30.06903 G01 X-52.66437 Y30.17002 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y29.40757 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y29.40757 G01 X-54.86998 Y29.41270 G01 X-54.98085 Y29.50371 G01 X-55.03629 Y29.55915 G01 X-55.16065 Y29.71069 G01 X-55.20421 Y29.77589 G01 X-55.29664 Y29.94877 G01 X-55.32664 Y30.02121 G01 X-55.37178 Y30.17002 G01 X-55.37556 Y30.17002 G01 X-55.34851 Y30.06903 G01 X-55.27828 Y29.89949 G01 X-55.18651 Y29.74056 G01 X-55.07480 Y29.59494 G01 X-54.94506 Y29.46520 G01 X-54.86998 Y29.40757 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y25.12734 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y25.12734 G01 X-54.86998 Y25.13247 G01 X-54.94506 Y25.07486 G01 X-55.07480 Y24.94509 G01 X-55.18651 Y24.79950 G01 X-55.27828 Y24.64055 G01 X-55.34851 Y24.47103 G01 X-55.37556 Y24.37004 G01 X-55.37178 Y24.37004 G01 X-55.32664 Y24.51880 G01 X-55.29664 Y24.59124 G01 X-55.20421 Y24.76414 G01 X-55.16065 Y24.82934 G01 X-55.03629 Y24.98088 G01 X-54.98085 Y25.03633 G01 X-54.86998 Y25.12734 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y24.37004 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y24.37004 G01 X-52.66820 Y24.37004 G01 X-52.71334 Y24.51880 G01 X-52.74334 Y24.59124 G01 X-52.83574 Y24.76414 G01 X-52.87930 Y24.82934 G01 X-53.00368 Y24.98088 G01 X-53.05913 Y25.03633 G01 X-53.16995 Y25.12729 G01 X-53.16995 Y25.13247 G01 X-53.09492 Y25.07486 G01 X-52.96515 Y24.94509 G01 X-52.85339 Y24.79947 G01 X-52.76165 Y24.64057 G01 X-52.69144 Y24.47100 G01 X-52.66437 Y24.37004 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-52.66437 Y22.67001 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-52.66437 Y22.67001 G01 X-52.66820 Y22.67001 G01 X-52.71334 Y22.52122 G01 X-52.74334 Y22.44878 G01 X-52.83574 Y22.27588 G01 X-52.87930 Y22.21068 G01 X-53.00368 Y22.05914 G01 X-53.05913 Y22.00370 G01 X-53.16995 Y21.91274 G01 X-53.16995 Y21.90758 G01 X-53.09492 Y21.96519 G01 X-52.96515 Y22.09496 G01 X-52.85339 Y22.24058 G01 X-52.76165 Y22.39948 G01 X-52.69144 Y22.56905 G01 X-52.66437 Y22.67001 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-54.86998 Y21.90758 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-54.86998 Y21.90758 G01 X-54.86998 Y21.91269 G01 X-54.98085 Y22.00370 G01 X-55.03629 Y22.05914 G01 X-55.16065 Y22.21068 G01 X-55.20421 Y22.27588 G01 X-55.29664 Y22.44878 G01 X-55.32664 Y22.52122 G01 X-55.37178 Y22.67001 G01 X-55.37556 Y22.67001 G01 X-55.34851 Y22.56902 G01 X-55.27828 Y22.39950 G01 X-55.18651 Y22.24055 G01 X-55.07480 Y22.09496 G01 X-54.94506 Y21.96519 G01 X-54.86998 Y21.90758 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-59.77913 Y16.78918 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-59.77913 Y16.78918 G01 X-59.93943 Y16.74056 G01 X-60.01190 Y16.71054 G01 X-60.24370 Y16.58664 G01 X-60.35767 Y16.52573 G01 X-60.42287 Y16.48217 G01 X-60.72595 Y16.23345 G01 X-60.78139 Y16.17800 G01 X-61.03011 Y15.87493 G01 X-61.07367 Y15.80973 G01 X-61.25848 Y15.46396 G01 X-61.28850 Y15.39149 G01 X-61.40232 Y15.01631 G01 X-61.41761 Y14.93942 G01 X-61.45604 Y14.54923 G01 X-61.45797 Y14.51001 G01 X-61.45797 Y7.10444 G01 X-61.71116 Y6.85125 G01 X-61.84230 Y6.57622 G01 X-61.87037 Y6.52402 G01 X-62.07908 Y6.17828 G01 X-62.09925 Y6.14830 G01 X-62.33625 Y5.83086 G01 X-62.35122 Y5.81272 G01 X-62.61573 Y5.52275 G01 X-62.62968 Y5.50889 G01 X-62.92142 Y5.24620 G01 X-62.94006 Y5.23098 G01 X-63.25932 Y4.99578 G01 X-63.29035 Y4.97518 G01 X-63.54004 Y4.82662 G01 X-63.65050 Y4.81061 G01 X-63.69820 Y4.80602 G01 X-64.09028 Y4.78801 G01 X-64.13399 Y4.78819 G01 X-64.52609 Y4.80868 G01 X-64.57430 Y4.81359 G01 X-64.96637 Y4.87305 G01 X-65.02797 Y4.88552 G01 X-65.34113 Y4.96505 G01 X-65.41049 Y5.00261 G01 X-65.47542 Y5.04661 G01 X-65.77689 Y5.29725 G01 X-65.80582 Y5.32380 G01 X-65.80780 Y5.32580 G01 X-65.83378 Y5.35483 G01 X-66.07882 Y5.65681 G01 X-66.12172 Y5.72169 G01 X-66.30366 Y6.06540 G01 X-66.33320 Y6.13733 G01 X-66.44521 Y6.50977 G01 X-66.46025 Y6.58607 G01 X-66.49807 Y6.97312 G01 X-66.49998 Y7.01201 G01 X-66.49998 Y17.50038 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-66.49995 Y20.64962 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-66.49995 Y20.64962 G01 X-66.49998 Y28.10500 G01 X-73.05000 Y28.10500 G01 X-73.08919 Y28.10694 G01 X-73.47939 Y28.14537 G01 X-73.55627 Y28.16066 G01 X-73.93146 Y28.27447 G01 X-74.00392 Y28.30450 G01 X-74.34969 Y28.48931 G01 X-74.41489 Y28.53287 G01 X-74.71797 Y28.78158 G01 X-74.74705 Y28.80795 G01 X-79.82705 Y33.88795 G01 X-79.85342 Y33.91703 G01 X-80.10213 Y34.22011 G01 X-80.14569 Y34.28531 G01 X-80.33050 Y34.63108 G01 X-80.36053 Y34.70354 G01 X-80.47434 Y35.07873 G01 X-80.48963 Y35.15561 G01 X-80.52806 Y35.54581 G01 X-80.52806 Y35.62422 G01 X-80.48963 Y36.01441 G01 X-80.47434 Y36.09130 G01 X-80.36053 Y36.46648 G01 X-80.33050 Y36.53895 G01 X-80.14569 Y36.88472 G01 X-80.10213 Y36.94992 G01 X-79.85342 Y37.25299 G01 X-79.79797 Y37.30844 G01 X-79.49489 Y37.55716 G01 X-79.42969 Y37.60072 G01 X-79.08392 Y37.78553 G01 X-79.01146 Y37.81555 G01 X-78.83406 Y37.86935 G01 X-78.63627 Y37.92937 G01 X-78.55939 Y37.94466 G01 X-78.16919 Y37.98309 G01 X-78.09078 Y37.98309 G01 X-77.70059 Y37.94466 G01 X-77.62370 Y37.92937 G01 X-77.24852 Y37.81555 G01 X-77.17605 Y37.78553 G01 X-76.83028 Y37.60072 G01 X-76.76508 Y37.55716 G01 X-76.46201 Y37.30844 G01 X-76.43292 Y37.28208 G01 X-72.05587 Y32.90502 G01 X-66.49998 Y32.90502 G01 X-66.49998 Y34.01038 G01 X-66.40287 Y34.28173 G01 X-66.38534 Y34.33936 G01 X-66.28715 Y34.73143 G01 X-66.27996 Y34.76740 G01 X-66.22179 Y35.15947 G01 X-66.21946 Y35.18312 G01 X-66.20020 Y35.57520 G01 X-66.20020 Y35.59483 G01 X-66.21946 Y35.98693 G01 X-66.22179 Y36.01058 G01 X-66.27996 Y36.40265 G01 X-66.28715 Y36.43862 G01 X-66.38534 Y36.83069 G01 X-66.40287 Y36.88832 G01 X-66.49995 Y37.15962 G01 X-66.57656 Y37.25299 G01 X-66.60292 Y37.28208 G01 X-71.68292 Y42.36208 G01 X-71.71200 Y42.38844 G01 X-72.01508 Y42.63716 G01 X-72.08028 Y42.68072 G01 X-72.42605 Y42.86553 G01 X-72.49852 Y42.89555 G01 X-72.87370 Y43.00937 G01 X-72.95058 Y43.02466 G01 X-73.34078 Y43.06309 G01 X-73.38000 Y43.06502 G01 X-91.10587 Y43.06502 G01 X-94.64498 Y46.60413 G01 X-94.64498 Y46.61002 G01 X-94.65267 Y46.68805 G01 X-94.67543 Y46.76308 G01 X-94.71239 Y46.83225 G01 X-94.76215 Y46.89285 G01 X-94.82275 Y46.94261 G01 X-94.89192 Y46.97957 G01 X-94.96695 Y47.00233 G01 X-95.04498 Y47.01002 G01 X-95.09217 Y47.01002 G01 X-95.18008 Y47.08216 G01 X-95.24528 Y47.12572 G01 X-95.59105 Y47.31053 G01 X-95.66352 Y47.34055 G01 X-96.03870 Y47.45437 G01 X-96.11559 Y47.46966 G01 X-96.50576 Y47.50809 G01 X-96.58419 Y47.50809 G01 X-96.97439 Y47.46966 G01 X-97.05125 Y47.45437 G01 X-97.42646 Y47.34055 G01 X-97.49892 Y47.31053 G01 X-97.84469 Y47.12572 G01 X-97.90987 Y47.08216 G01 X-97.99780 Y47.01002 G01 X-98.04497 Y47.01002 G01 X-98.12303 Y47.00233 G01 X-98.18706 Y46.98289 G01 X-98.20052 Y46.97822 G01 X-98.25658 Y46.94830 G01 X-98.27238 Y46.93834 G01 X-98.31988 Y46.89938 G01 X-98.33435 Y46.88490 G01 X-98.37324 Y46.83750 G01 X-98.38332 Y46.82148 G01 X-98.41314 Y46.76572 G01 X-98.41807 Y46.75145 G01 X-98.43730 Y46.68805 G01 X-98.44500 Y46.61002 G01 X-98.44500 Y46.56283 G01 X-98.51713 Y46.47492 G01 X-98.56067 Y46.40972 G01 X-98.74550 Y46.06395 G01 X-98.77553 Y45.99148 G01 X-98.88934 Y45.61630 G01 X-98.90461 Y45.53941 G01 X-98.94306 Y45.14922 G01 X-98.94306 Y45.07081 G01 X-98.90461 Y44.68061 G01 X-98.88934 Y44.60373 G01 X-98.77553 Y44.22854 G01 X-98.74550 Y44.15608 G01 X-98.56067 Y43.81031 G01 X-98.51713 Y43.74511 G01 X-98.44500 Y43.65720 G01 X-98.44500 Y43.61000 G01 X-98.43730 Y43.53197 G01 X-98.41815 Y43.46880 G01 X-98.41309 Y43.45425 G01 X-98.38338 Y43.39865 G01 X-98.37324 Y43.38250 G01 X-98.33443 Y43.33523 G01 X-98.31977 Y43.32057 G01 X-98.27250 Y43.28178 G01 X-98.25627 Y43.27160 G01 X-98.20080 Y43.24193 G01 X-98.18569 Y43.23670 G01 X-98.12303 Y43.21770 G01 X-98.04497 Y43.21000 G01 X-98.03910 Y43.21000 G01 X-96.02092 Y41.19185 G01 X-97.24927 Y39.96353 G01 X-97.30202 Y39.95832 G01 X-97.37705 Y39.93556 G01 X-97.44469 Y39.89942 G01 X-97.44733 Y39.89767 G01 X-97.49887 Y39.85540 G01 X-97.51335 Y39.84090 G01 X-97.55224 Y39.79348 G01 X-97.56232 Y39.77747 G01 X-97.59232 Y39.72134 G01 X-97.59626 Y39.71011 G01 X-97.61627 Y39.64405 G01 X-97.62399 Y39.56602 G01 X-97.62399 Y39.49607 G01 X-97.64370 Y39.44847 G01 X-97.67215 Y39.35466 G01 X-97.68744 Y39.27775 G01 X-97.69707 Y39.18022 G01 X-97.69707 Y39.10181 G01 X-97.68744 Y39.00427 G01 X-97.67215 Y38.92736 G01 X-97.64370 Y38.83356 G01 X-97.62399 Y38.78596 G01 X-97.62399 Y38.71601 G01 X-97.61627 Y38.63798 G01 X-97.59631 Y38.57212 G01 X-97.59227 Y38.56064 G01 X-97.56242 Y38.50470 G01 X-97.55221 Y38.48845 G01 X-97.51348 Y38.44126 G01 X-97.49872 Y38.42652 G01 X-97.45155 Y38.38781 G01 X-97.43522 Y38.37755 G01 X-97.37934 Y38.34768 G01 X-97.36804 Y38.34372 G01 X-97.30202 Y38.32370 G01 X-97.22397 Y38.31601 G01 X-97.15404 Y38.31601 G01 X-97.10642 Y38.29630 G01 X-97.01264 Y38.26785 G01 X-96.93573 Y38.25256 G01 X-96.83819 Y38.24293 G01 X-96.75976 Y38.24293 G01 X-96.66225 Y38.25256 G01 X-96.58534 Y38.26785 G01 X-96.49153 Y38.29630 G01 X-96.44391 Y38.31601 G01 X-96.37398 Y38.31601 G01 X-96.29595 Y38.32370 G01 X-96.22976 Y38.34377 G01 X-96.21869 Y38.34766 G01 X-96.16253 Y38.37765 G01 X-96.14650 Y38.38774 G01 X-96.09905 Y38.42668 G01 X-96.08465 Y38.44108 G01 X-96.04566 Y38.48858 G01 X-96.03568 Y38.50448 G01 X-96.00441 Y38.56295 G01 X-95.98168 Y38.63798 G01 X-95.97647 Y38.69073 G01 X-94.74815 Y39.91905 G01 X-93.79705 Y38.96795 G01 X-93.76797 Y38.94158 G01 X-93.46489 Y38.69287 G01 X-93.39969 Y38.64931 G01 X-93.05392 Y38.46450 G01 X-92.98146 Y38.43447 G01 X-92.60627 Y38.32066 G01 X-92.52939 Y38.30537 G01 X-92.13919 Y38.26694 G01 X-92.10000 Y38.26500 G01 X-74.37410 Y38.26500 G01 X-69.99705 Y33.88795 G01 X-69.96796 Y33.86158 G01 X-69.66489 Y33.61287 G01 X-69.59969 Y33.56931 G01 X-69.25392 Y33.38450 G01 X-69.18148 Y33.35447 G01 X-68.80627 Y33.24066 G01 X-68.72938 Y33.22537 G01 X-68.33919 Y33.18694 G01 X-68.26078 Y33.18694 G01 X-67.87058 Y33.22537 G01 X-67.79370 Y33.24066 G01 X-67.59576 Y33.30070 G01 X-67.41852 Y33.35447 G01 X-67.34605 Y33.38450 G01 X-67.00028 Y33.56931 G01 X-66.93508 Y33.61287 G01 X-66.63200 Y33.86158 G01 X-66.57656 Y33.91703 G01 X-66.49998 Y34.01038 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-82.48613 Y29.65501 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-82.48613 Y29.65501 G01 X-82.49552 Y29.63779 G01 X-82.63268 Y29.45458 G01 X-82.79453 Y29.29273 G01 X-82.97774 Y29.15557 G01 X-82.99496 Y29.14618 G01 X-82.99496 Y29.15169 G01 X-82.98976 Y29.15448 G01 X-82.92455 Y29.19804 G01 X-82.74269 Y29.34727 G01 X-82.68724 Y29.40272 G01 X-82.53802 Y29.58458 G01 X-82.49446 Y29.64978 G01 X-82.49164 Y29.65501 G01 X-82.48613 Y29.65501 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-84.69499 Y29.14618 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-84.69499 Y29.14618 G01 X-84.71221 Y29.15557 G01 X-84.89542 Y29.29273 G01 X-85.05727 Y29.45458 G01 X-85.19443 Y29.63779 G01 X-85.20382 Y29.65501 G01 X-85.19834 Y29.65501 G01 X-85.19552 Y29.64978 G01 X-85.15196 Y29.58458 G01 X-85.00273 Y29.40272 G01 X-84.94728 Y29.34727 G01 X-84.76542 Y29.19804 G01 X-84.70022 Y29.15448 G01 X-84.69499 Y29.15166 G01 X-84.69499 Y29.14618 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-90.40999 Y34.22618 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-90.40999 Y34.22618 G01 X-90.42721 Y34.23557 G01 X-90.61042 Y34.37273 G01 X-90.77227 Y34.53458 G01 X-90.90943 Y34.71779 G01 X-90.91882 Y34.73501 G01 X-90.91334 Y34.73501 G01 X-90.91052 Y34.72978 G01 X-90.86696 Y34.66458 G01 X-90.71773 Y34.48272 G01 X-90.66228 Y34.42727 G01 X-90.48042 Y34.27804 G01 X-90.41522 Y34.23448 G01 X-90.40999 Y34.23166 G01 X-90.40999 Y34.22618 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-88.20113 Y34.73501 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-88.20113 Y34.73501 G01 X-88.21052 Y34.71779 G01 X-88.34768 Y34.53458 G01 X-88.50953 Y34.37273 G01 X-88.69274 Y34.23557 G01 X-88.70996 Y34.22618 G01 X-88.70996 Y34.23169 G01 X-88.70476 Y34.23448 G01 X-88.63955 Y34.27804 G01 X-88.45769 Y34.42727 G01 X-88.40224 Y34.48272 G01 X-88.25302 Y34.66458 G01 X-88.20946 Y34.72978 G01 X-88.20664 Y34.73501 G01 X-88.20113 Y34.73501 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-84.69499 Y31.85836 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-84.69499 Y31.85836 G01 X-84.70022 Y31.85554 G01 X-84.76542 Y31.81198 G01 X-84.94728 Y31.66276 G01 X-85.00273 Y31.60731 G01 X-85.15196 Y31.42545 G01 X-85.19552 Y31.36024 G01 X-85.19831 Y31.35504 G01 X-85.20382 Y31.35504 G01 X-85.19443 Y31.37226 G01 X-85.05727 Y31.55547 G01 X-84.89542 Y31.71732 G01 X-84.71221 Y31.85448 G01 X-84.69499 Y31.86387 G01 X-84.69499 Y31.85836 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-82.48613 Y31.35504 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-82.48613 Y31.35504 G01 X-82.49166 Y31.35504 G01 X-82.49446 Y31.36024 G01 X-82.53802 Y31.42545 G01 X-82.68724 Y31.60731 G01 X-82.74269 Y31.66276 G01 X-82.92455 Y31.81198 G01 X-82.98976 Y31.85554 G01 X-82.99496 Y31.85834 G01 X-82.99496 Y31.86387 G01 X-82.97774 Y31.85448 G01 X-82.79453 Y31.71732 G01 X-82.63268 Y31.55547 G01 X-82.49552 Y31.37226 G01 X-82.48613 Y31.35504 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-66.49995 Y37.15962 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-66.49995 Y37.15962 G01 X-66.49998 Y50.52038 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-82.48613 Y65.21501 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-82.48613 Y65.21501 G01 X-82.49164 Y65.21501 G01 X-82.49446 Y65.20978 G01 X-82.53802 Y65.14458 G01 X-82.68724 Y64.96272 G01 X-82.74269 Y64.90727 G01 X-82.92455 Y64.75804 G01 X-82.98976 Y64.71448 G01 X-82.99496 Y64.71169 G01 X-82.99496 Y64.70618 G01 X-82.97774 Y64.71557 G01 X-82.79453 Y64.85273 G01 X-82.63268 Y65.01458 G01 X-82.49552 Y65.19779 G01 X-82.48613 Y65.21501 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-82.48613 Y66.91504 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-82.48613 Y66.91504 G01 X-82.49166 Y66.91504 G01 X-82.49446 Y66.92024 G01 X-82.53802 Y66.98545 G01 X-82.68724 Y67.16731 G01 X-82.74269 Y67.22276 G01 X-82.92455 Y67.37198 G01 X-82.98976 Y67.41554 G01 X-82.99496 Y67.41834 G01 X-82.99496 Y67.42387 G01 X-82.97774 Y67.41448 G01 X-82.79453 Y67.27732 G01 X-82.63268 Y67.11547 G01 X-82.49552 Y66.93226 G01 X-82.48613 Y66.91504 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-84.69499 Y67.41836 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-84.69499 Y67.41836 G01 X-84.70022 Y67.41554 G01 X-84.76542 Y67.37198 G01 X-84.94728 Y67.22276 G01 X-85.00273 Y67.16731 G01 X-85.15196 Y66.98545 G01 X-85.19552 Y66.92024 G01 X-85.19831 Y66.91504 G01 X-85.20382 Y66.91504 G01 X-85.19443 Y66.93226 G01 X-85.05727 Y67.11547 G01 X-84.89542 Y67.27732 G01 X-84.71221 Y67.41448 G01 X-84.69499 Y67.42387 G01 X-84.69499 Y67.41836 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-84.69499 Y64.70618 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-84.69499 Y64.70618 G01 X-84.71221 Y64.71557 G01 X-84.89542 Y64.85273 G01 X-85.05727 Y65.01458 G01 X-85.19443 Y65.19779 G01 X-85.20382 Y65.21501 G01 X-85.19834 Y65.21501 G01 X-85.19552 Y65.20978 G01 X-85.15196 Y65.14458 G01 X-85.00273 Y64.96272 G01 X-84.94728 Y64.90727 G01 X-84.76542 Y64.75804 G01 X-84.70022 Y64.71448 G01 X-84.69499 Y64.71166 G01 X-84.69499 Y64.70618 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-88.20113 Y61.83504 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-88.20113 Y61.83504 G01 X-88.20666 Y61.83504 G01 X-88.20946 Y61.84024 G01 X-88.25302 Y61.90545 G01 X-88.40224 Y62.08731 G01 X-88.45769 Y62.14276 G01 X-88.63955 Y62.29198 G01 X-88.70476 Y62.33554 G01 X-88.70996 Y62.33834 G01 X-88.70996 Y62.34387 G01 X-88.69274 Y62.33448 G01 X-88.50953 Y62.19732 G01 X-88.34768 Y62.03547 G01 X-88.21052 Y61.85226 G01 X-88.20113 Y61.83504 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-88.20113 Y60.13501 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-88.20113 Y60.13501 G01 X-88.20664 Y60.13501 G01 X-88.20946 Y60.12978 G01 X-88.25302 Y60.06458 G01 X-88.40224 Y59.88272 G01 X-88.45769 Y59.82727 G01 X-88.63955 Y59.67804 G01 X-88.70476 Y59.63448 G01 X-88.70996 Y59.63169 G01 X-88.70996 Y59.62618 G01 X-88.69274 Y59.63557 G01 X-88.50953 Y59.77273 G01 X-88.34768 Y59.93458 G01 X-88.21052 Y60.11779 G01 X-88.20113 Y60.13501 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-90.40999 Y59.62618 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-90.40999 Y59.62618 G01 X-90.40999 Y59.63166 G01 X-90.41522 Y59.63448 G01 X-90.48042 Y59.67804 G01 X-90.66228 Y59.82727 G01 X-90.71773 Y59.88272 G01 X-90.86696 Y60.06458 G01 X-90.91052 Y60.12978 G01 X-90.91334 Y60.13501 G01 X-90.91882 Y60.13501 G01 X-90.90943 Y60.11779 G01 X-90.77227 Y59.93458 G01 X-90.61042 Y59.77273 G01 X-90.42721 Y59.63557 G01 X-90.40999 Y59.62618 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-90.40999 Y62.33836 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-90.40999 Y62.33836 G01 X-90.40999 Y62.34387 G01 X-90.42721 Y62.33448 G01 X-90.61042 Y62.19732 G01 X-90.77227 Y62.03547 G01 X-90.90943 Y61.85226 G01 X-90.91882 Y61.83504 G01 X-90.91331 Y61.83504 G01 X-90.91052 Y61.84024 G01 X-90.86696 Y61.90545 G01 X-90.71773 Y62.08731 G01 X-90.66228 Y62.14276 G01 X-90.48042 Y62.29198 G01 X-90.41522 Y62.33554 G01 X-90.40999 Y62.33836 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z3.50000 ( retract ) G00 X-92.77450 Y72.90961 ( rapid move to begin. ) G01 F200.00000 ( Mill infeed pass 1/1 ) G01 Z-0.20000 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G01 F400.00000 G01 X-92.77450 Y72.90961 G01 X-92.77450 Y73.19044 G01 X-92.80594 Y73.46956 G01 X-92.86843 Y73.74334 G01 X-92.96119 Y74.00844 G01 X-93.08303 Y74.26148 G01 X-93.23243 Y74.49927 G01 X-93.40754 Y74.71883 G01 X-93.60617 Y74.91746 G01 X-93.82573 Y75.09257 G01 X-94.06352 Y75.24197 G01 X-94.31656 Y75.36381 G01 X-94.58166 Y75.45657 G01 X-94.85547 Y75.51908 G01 X-95.10972 Y75.54773 G01 X-95.13446 Y75.55050 G01 X-95.41544 Y75.55050 G01 X-95.44823 Y75.54682 G01 X-95.69446 Y75.51908 G01 X-95.96829 Y75.45657 G01 X-96.23337 Y75.36381 G01 X-96.48643 Y75.24197 G01 X-96.72420 Y75.09257 G01 X-96.94375 Y74.91746 G01 X-97.14241 Y74.71883 G01 X-97.31749 Y74.49927 G01 X-97.46692 Y74.26148 G01 X-97.58876 Y74.00844 G01 X-97.68150 Y73.74334 G01 X-97.74401 Y73.46956 G01 X-97.77543 Y73.19044 G01 X-97.77543 Y72.90961 G01 X-97.74401 Y72.63049 G01 X-97.68150 Y72.35671 G01 X-97.58876 Y72.09161 G01 X-97.46692 Y71.83857 G01 X-97.31749 Y71.60078 G01 X-97.14241 Y71.38122 G01 X-96.94375 Y71.18259 G01 X-96.72422 Y71.00751 G01 X-96.48643 Y70.85808 G01 X-96.23339 Y70.73624 G01 X-95.96829 Y70.64348 G01 X-95.69451 Y70.58099 G01 X-95.41539 Y70.54955 G01 X-95.13456 Y70.54955 G01 X-94.85544 Y70.58099 G01 X-94.58166 Y70.64348 G01 X-94.31656 Y70.73624 G01 X-94.06352 Y70.85808 G01 X-93.82573 Y71.00751 G01 X-93.60617 Y71.18259 G01 X-93.40754 Y71.38122 G01 X-93.23243 Y71.60080 G01 X-93.08303 Y71.83857 G01 X-92.96119 Y72.09163 G01 X-92.86843 Y72.35671 G01 X-92.80594 Y72.63052 G01 X-92.77450 Y72.90961 G04 P0 ( dwell for no time -- G64 should not smooth over this point ) G00 Z30.000000 ( retract ) M5 ( Spindle off. ) G04 P1.000000 M9 ( Coolant off. ) M2 ( Program end. )