#include "motorctl.hpp"
#include "esp_log.h"
#include "types.hpp"
//tag for logging
static const char * TAG = "motor-control";
#define TIMEOUT_IDLE_WHEN_NO_COMMAND 15000 // turn motor off when still on and no new command received within that time
#define TIMEOUT_QUEUE_WHEN_AT_TARGET 5000 // time waited for new command when motors at target duty (e.g. IDLE) (no need to handle fading in fast loop)
//====================================
//========== motorctl task ===========
//====================================
//task for handling the motors (ramp, current limit, driver)
void task_motorctl( void * ptrControlledMotor ){
//get pointer to controlledMotor instance from task parameter
controlledMotor * motor = (controlledMotor *)ptrControlledMotor;
ESP_LOGW(TAG, "Task-motorctl [%s]: starting handle loop...", motor->getName());
while(1){
motor->handle();
vTaskDelay(20 / portTICK_PERIOD_MS);
}
}
//=============================
//======== constructor ========
//=============================
//constructor, simultaniously initialize instance of motor driver 'motor' and current sensor 'cSensor' with provided config (see below lines after ':')
controlledMotor::controlledMotor(motorSetCommandFunc_t setCommandFunc, motorctl_config_t config_control, nvs_handle_t * nvsHandle_f, speedSensor * speedSensor_f, controlledMotor ** otherMotor_f):
//create current sensor
cSensor(config_control.currentSensor_adc, config_control.currentSensor_ratedCurrent, config_control.currentSnapToZeroThreshold, config_control.currentInverted),
configDefault(config_control){
//copy parameters for controlling the motor
config = config_control;
log = config.loggingEnabled;
//pointer to update motot dury method
motorSetCommand = setCommandFunc;
//pointer to nvs handle
nvsHandle = nvsHandle_f;
//pointer to other motor object
ppOtherMotor = otherMotor_f;
//pointer to speed sensor
sSensor = speedSensor_f;
//create queue, initialize config values
init();
}
//============================
//========== init ============
//============================
void controlledMotor::init(){
commandQueue = xQueueCreate( 1, sizeof( struct motorCommand_t ) );
if (commandQueue == NULL)
ESP_LOGE(TAG, "Failed to create command-queue");
else
ESP_LOGI(TAG, "[%s] Initialized command-queue", config.name);
// load config values from nvs, otherwise use default from config object
loadAccelDuration();
loadDecelDuration();
// turn motor off initially
motorSetCommand({motorstate_t::IDLE, 0.00});
//cSensor.calibrateZeroAmpere(); //currently done in currentsensor constructor TODO do this regularly e.g. in idle?
}
//----------------
//----- fade -----
//----------------
//local function that fades a variable
//- increments a variable (pointer) by given value
//- sets to target if already closer than increment
//TODO this needs testing
void fade(float * dutyNow, float dutyTarget, float dutyIncrement){
float dutyDelta = dutyTarget - *dutyNow;
if ( fabs(dutyDelta) > fabs(dutyIncrement) ) { //check if already close to target
*dutyNow = *dutyNow + dutyIncrement;
}
//already closer to target than increment
else {
*dutyNow = dutyTarget;
}
}
//----------------------------
//----- getStateFromDuty -----
//----------------------------
//local function that determines motor the direction from duty range -100 to 100
motorstate_t getStateFromDuty(float duty){
if(duty > 0) return motorstate_t::FWD;
if (duty < 0) return motorstate_t::REV;
return motorstate_t::IDLE;
}
//==============================
//=========== handle ===========
//==============================
//function that controls the motor driver and handles fading/ramp, current limit and deadtime
void controlledMotor::handle(){
//TODO: History: skip fading when motor was running fast recently / alternatively add rot-speed sensor
//--- RECEIVE DATA FROM QUEUE ---
if( xQueueReceive( commandQueue, &commandReceive, timeoutWaitForCommand / portTICK_PERIOD_MS ) ) //wait time is always 0 except when at target duty already
{
if(log) ESP_LOGV(TAG, "[%s] Read command from queue: state=%s, duty=%.2f", config.name, motorstateStr[(int)commandReceive.state], commandReceive.duty);
state = commandReceive.state;
dutyTarget = commandReceive.duty;
receiveTimeout = false;
timestamp_commandReceived = esp_log_timestamp();
}
// ----- EXPERIMENTAL, DIFFERENT MODES -----
// define target duty differently depending on current contro-mode
//declare variables used inside switch
float ampereNow, ampereTarget, ampereDiff;
float speedDiff;
switch (mode)
{
case motorControlMode_t::DUTY: // regulate to desired duty (as originally)
//--- convert duty ---
// define target duty (-100 to 100) from provided duty and motorstate
// this value is more suitable for t
// todo scale target input with DUTY-MAX here instead of in joysick cmd generationhe fading algorithm
switch (commandReceive.state)
{
case motorstate_t::BRAKE:
// update state
state = motorstate_t::BRAKE;
// dutyTarget = 0;
dutyTarget = fabs(commandReceive.duty);
break;
case motorstate_t::IDLE:
dutyTarget = 0;
break;
case motorstate_t::FWD:
dutyTarget = fabs(commandReceive.duty);
break;
case motorstate_t::REV:
dutyTarget = -fabs(commandReceive.duty);
break;
}
break;
#define CURRENT_CONTROL_ALLOWED_AMPERE_DIFF 1 //difference from target where no change is made yet
#define CURRENT_CONTROL_MIN_AMPERE 0.7 //current where motor is turned off
//TODO define different, fixed fading configuration in current mode, fade down can be significantly less (500/500ms fade up worked fine)
case motorControlMode_t::CURRENT: // regulate to desired current flow
ampereNow = cSensor.read();
ampereTarget = config.currentMax * commandReceive.duty / 100; // TODO ensure input data is 0-100 (no duty max), add currentMax to menu/config
if (commandReceive.state == motorstate_t::REV) ampereTarget = - ampereTarget; //target is negative when driving reverse
ampereDiff = ampereTarget - ampereNow;
if(log) ESP_LOGV("TESTING", "[%s] CURRENT-CONTROL: ampereNow=%.2f, ampereTarget=%.2f, diff=%.2f", config.name, ampereNow, ampereTarget, ampereDiff); // todo handle brake
//--- when IDLE to keep the current at target zero motor needs to be on for some duty (to compensate generator current)
if (commandReceive.duty == 0 && fabs(ampereNow) < CURRENT_CONTROL_MIN_AMPERE){ //stop motors completely when current is very low already
dutyTarget = 0;
}
else if (fabs(ampereDiff) > CURRENT_CONTROL_ALLOWED_AMPERE_DIFF || commandReceive.duty == 0) //#### BOOST BY 1 A
{
if (ampereDiff > 0 && commandReceive.state != motorstate_t::REV) // forward need to increase current
{
dutyTarget = 100; // todo add custom fading depending on diff? currently very dependent of fade times
}
else if (ampereDiff < 0 && commandReceive.state != motorstate_t::FWD) // backward need to increase current (more negative)
{
dutyTarget = -100;
}
else // fwd too much, rev too much -> decrease
{
dutyTarget = 0;
}
if(log) ESP_LOGV("TESTING", "[%s] CURRENT-CONTROL: set target to %.0f%%", config.name, dutyTarget);
}
else
{
dutyTarget = dutyNow; // target current reached
if(log) ESP_LOGD("TESTING", "[%s] CURRENT-CONTROL: target current %.3f reached", config.name, dutyTarget);
}
break;
#define SPEED_CONTROL_MAX_SPEED_KMH 10
#define SPEED_CONTROL_ALLOWED_KMH_DIFF 0.6
#define SPEED_CONTROL_MIN_SPEED 0.7 //" start from standstill" always accelerate to this speed, ignoring speedsensor data
case motorControlMode_t::SPEED: // regulate to desired speed
speedNow = sSensor->getKmph();
//caculate target speed from input
speedTarget = SPEED_CONTROL_MAX_SPEED_KMH * commandReceive.duty / 100; // TODO add maxSpeed to config
// target speed negative when driving reverse
if (commandReceive.state == motorstate_t::REV)
speedTarget = -speedTarget;
if (sSensor->getTimeLastUpdate() != timestamp_speedLastUpdate ){ //only modify duty when new speed data available
timestamp_speedLastUpdate = sSensor->getTimeLastUpdate(); //TODO get time only once
speedDiff = speedTarget - speedNow;
} else {
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: no new speed data, not changing duty", config.name);
speedDiff = 0;
}
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: target-speed=%.2f, current-speed=%.2f, diff=%.3f", config.name, speedTarget, speedNow, speedDiff);
//stop when target is 0
if (commandReceive.duty == 0) { //TODO add IDLE, BRAKE state
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: OFF, target is 0... current-speed=%.2f, diff=%.3f", config.name, speedNow, speedDiff);
dutyTarget = 0;
}
else if (fabs(speedNow) < SPEED_CONTROL_MIN_SPEED){ //start from standstill or too slow (not enough speedsensor data)
if (log)
ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: starting from standstill -> increase duty... target-speed=%.2f, current-speed=%.2f, diff=%.3f", config.name, speedTarget, speedNow, speedDiff);
if (commandReceive.state == motorstate_t::FWD)
dutyTarget = 100;
else if (commandReceive.state == motorstate_t::REV)
dutyTarget = -100;
}
else if (fabs(speedDiff) > SPEED_CONTROL_ALLOWED_KMH_DIFF) //speed too fast/slow
{
if (speedDiff > 0 && commandReceive.state != motorstate_t::REV) // forward need to increase speed
{
// TODO retain max duty here
dutyTarget = 100; // todo add custom fading depending on diff? currently very dependent of fade times
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: speed to low (fwd), diff=%.2f, increasing set target from %.1f%% to %.1f%%", config.name, speedDiff, dutyNow, dutyTarget);
}
else if (speedDiff < 0 && commandReceive.state != motorstate_t::FWD) // backward need to increase speed (more negative)
{
dutyTarget = -100;
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: speed to low (rev), diff=%.2f, increasing set target from %.1f%% to %.1f%%", config.name, speedDiff, dutyNow, dutyTarget);
}
else // fwd too much, rev too much -> decrease
{
dutyTarget = 0;
if(log) ESP_LOGV("TESTING", "[%s] SPEED-CONTROL: speed to high, diff=%.2f, decreasing set target from %.1f%% to %.1f%%", config.name, speedDiff, dutyNow, dutyTarget);
}
}
else
{
dutyTarget = dutyNow; // target speed reached
if(log) ESP_LOGD("TESTING", "[%s] SPEED-CONTROL: target speed %.3f reached", config.name, speedTarget);
}
break;
}
//--- TIMEOUT NO DATA ---
// turn motors off if no data received for a long time (e.g. no uart data or control task offline)
if ( dutyNow != 0 && esp_log_timestamp() - timestamp_commandReceived > TIMEOUT_IDLE_WHEN_NO_COMMAND && !receiveTimeout)
{
if(log) ESP_LOGE(TAG, "[%s] TIMEOUT, motor active, but no target data received for more than %ds -> switch from duty=%.2f to IDLE", config.name, TIMEOUT_IDLE_WHEN_NO_COMMAND / 1000, dutyTarget);
receiveTimeout = true;
// set target and last command to IDLE
state = motorstate_t::IDLE;
commandReceive.state = motorstate_t::IDLE;
dutyTarget = 0; // todo put this in else section of queue (no data received) and add control mode "timeout"?
commandReceive.duty = 0;
}
//--- CALCULATE DUTY-DIFF ---
dutyDelta = dutyTarget - dutyNow;
//positive: need to increase by that value
//negative: need to decrease
//--- DETECT ALREADY AT TARGET ---
// when already at exact target duty there is no need to run very fast to handle fading
//-> slow down loop by waiting significantly longer for new commands to arrive
if (mode != motorControlMode_t::CURRENT //dont slow down when in CURRENT mode at all
&& ((dutyDelta == 0 && !config.currentLimitEnabled && !config.tractionControlSystemEnabled && mode != motorControlMode_t::SPEED) //when neither of current-limit, tractioncontrol or speed-mode is enabled slow down when target reached
|| (dutyTarget == 0 && dutyNow == 0))) //otherwise only slow down when when actually off
{
//increase queue timeout when duty is the same (once)
if (timeoutWaitForCommand == 0)
{ // TODO verify if state matches too?
if(log) ESP_LOGI(TAG, "[%s] already at target duty %.2f, slowing down...", config.name, dutyTarget);
timeoutWaitForCommand = TIMEOUT_QUEUE_WHEN_AT_TARGET; // wait in queue very long, for new command to arrive
}
vTaskDelay(20 / portTICK_PERIOD_MS); // add small additional delay overall, in case the same commands get spammed
}
//reset timeout when duty differs again (once)
else if (timeoutWaitForCommand != 0)
{
timeoutWaitForCommand = 0; // dont wait additional time for new commands, handle fading fast
if(log) ESP_LOGI(TAG, "[%s] duty changed to %.2f, resuming at full speed", config.name, dutyTarget);
// adjust lastRun timestamp to not mess up fading, due to much time passed but with no actual duty change
timestampLastRunUs = esp_timer_get_time() - 20*1000; //subtract approx 1 cycle delay
}
//TODO skip rest of the handle function below using return? Some regular driver updates sound useful though
//--- BRAKE ---
//brake immediately, update state, duty and exit this cycle of handle function
if (state == motorstate_t::BRAKE){
if(log) ESP_LOGD(TAG, "braking - skip fading");
motorSetCommand({motorstate_t::BRAKE, dutyTarget});
if(log) ESP_LOGD(TAG, "[%s] Set Motordriver: state=%s, duty=%.2f - Measurements: current=%.2f, speed=N/A", config.name, motorstateStr[(int)state], dutyNow, currentNow);
//dutyNow = 0;
return; //no need to run the fade algorithm
}
//----- FADING -----
//calculate passed time since last run
int64_t usPassed = esp_timer_get_time() - timestampLastRunUs;
//--- calculate increment (acceleration) ---
//calculate increment for fading UP with passed time since last run and configured fade time
//- traction control -
if (tcs_isExceeded) // disable acceleration when slippage is currently detected
dutyIncrementAccel = 0;
//- recent braking -
//FIXME reset timeout when duty less
else if (isBraking && (esp_log_timestamp() - timestampBrakeStart) < config.brakePauseBeforeResume) // prevent immediate direction change when currently braking with timeout (eventually currently sliding)
{
if (log) ESP_LOGI(TAG, "pause after brake... -> accel = 0");
dutyIncrementAccel = 0;
}
//- normal accel -
else if (config.msFadeAccel > 0)
dutyIncrementAccel = (usPassed / ((float)config.msFadeAccel * 1000)) * 100; // TODO define maximum increment - first run after startup (or long) pause can cause a very large increment
//- sport mode -
else //no accel limit (immediately set to 100)
dutyIncrementAccel = 100;
//--- calculate increment (deceleration) ---
//- sport mode -
if (config.msFadeDecel == 0){ //no decel limit (immediately reduce to 0)
dutyIncrementDecel = 100;
}
//- brake -
//detect when quicker brake response is desired (e.g. full speed forward, joystick suddenly is full reverse -> break fast)
#define NO_BRAKE_THRESHOLD_TOO_SLOW_DUTY 10 //TODO test/adjust this - dont brake when slow already (avoids starting full dead time)
else if (commandReceive.state != state && // direction differs
fabs(dutyNow) > NO_BRAKE_THRESHOLD_TOO_SLOW_DUTY && // not very slow already
fabs(dutyTarget) > brakeStartThreshold) // joystick above threshold
{
// set braking state and track start time (both for disabling acceleration for some time)
if (!isBraking) {
if (log) ESP_LOGW(TAG, "started braking...");
timestampBrakeStart = esp_log_timestamp();
isBraking = true;
}
// use brake deceleration instead of normal deceleration
dutyIncrementDecel = (usPassed / ((float)config.brakeDecel * 1000)) * 100;
if(log) ESP_LOGI(TAG, "braking (target duty >%.0f%% in other direction) -> using deceleration %dms", brakeStartThreshold, config.brakeDecel);
}
//- normal deceleration -
else {
// normal deceleration according to configured time
dutyIncrementDecel = (usPassed / ((float)config.msFadeDecel * 1000)) * 100;
}
// reset braking state when start condition is no longer met (stick below threshold again)
if (isBraking &&
(fabs(dutyTarget) < brakeStartThreshold || commandReceive.state == state))
{
ESP_LOGW(TAG, "brake condition no longer met");
isBraking = false;
}
//--- fade duty to target (up and down) ---
//TODO: this needs optimization (can be more clear and/or simpler)
if (dutyDelta > 0) { //difference positive -> increasing duty (-100 -> 100)
if (dutyNow < 0) { //reverse, decelerating
fade(&dutyNow, dutyTarget, dutyIncrementDecel);
}
else if (dutyNow >= 0) { //forward, accelerating
fade(&dutyNow, dutyTarget, dutyIncrementAccel);
}
}
else if (dutyDelta < 0) { //difference negative -> decreasing duty (100 -> -100)
if (dutyNow <= 0) { //reverse, accelerating
fade(&dutyNow, dutyTarget, - dutyIncrementAccel);
}
else if (dutyNow > 0) { //forward, decelerating
fade(&dutyNow, dutyTarget, - dutyIncrementDecel);
}
}
//----- CURRENT LIMIT -----
currentNow = cSensor.read();
if ((config.currentLimitEnabled) && (dutyDelta != 0)){
if (fabs(currentNow) > config.currentMax){
float dutyOld = dutyNow;
//adaptive decrement:
//Note current exceeded twice -> twice as much decrement: TODO: decrement calc needs finetuning, currently random values
dutyIncrementDecel = (currentNow/config.currentMax) * ( usPassed / ((float)config.msFadeDecel * 1500) ) * 100;
float currentLimitDecrement = ( (float)usPassed / ((float)1000 * 1000) ) * 100; //1000ms from 100 to 0
if (dutyNow < -currentLimitDecrement) {
dutyNow += currentLimitDecrement;
} else if (dutyNow > currentLimitDecrement) {
dutyNow -= currentLimitDecrement;
}
if(log) ESP_LOGW(TAG, "[%s] current limit exceeded! now=%.3fA max=%.1fA => decreased duty from %.3f to %.3f", config.name, currentNow, config.currentMax, dutyOld, dutyNow);
}
}
//----- TRACTION CONTROL -----
//reduce duty when turning faster than expected
//TODO only run this when speed sensors actually updated
//handle tcs when enabled and new speed sensor data is available TODO: currently assumes here that speed sensor data of other motor updated as well
#define TCS_MAX_ALLOWED_RATIO_DIFF 0.1 //when motor speed ratio differs more than that, one motor is slowed down
#define TCS_NO_SPEED_DATA_TIMEOUT_US 200*1000
#define TCS_MIN_SPEED_KMH 1 //must be at least that fast for TCS to be enabled
//TODO rework this: clearer structure (less nested if statements)
if (config.tractionControlSystemEnabled && mode == motorControlMode_t::SPEED && sSensor->getTimeLastUpdate() != tcs_timestampLastSpeedUpdate && (esp_timer_get_time() - tcs_timestampLastRun < TCS_NO_SPEED_DATA_TIMEOUT_US)){
//update last speed update received
tcs_timestampLastSpeedUpdate = sSensor->getTimeLastUpdate(); //TODO: re-use tcs_timestampLastRun in if statement, instead of having additional variable SpeedUpdate
//calculate time passed since last run
uint32_t tcs_usPassed = esp_timer_get_time() - tcs_timestampLastRun; // passed time since last time handled
tcs_timestampLastRun = esp_timer_get_time();
//get motor stats
float speedNowThis = sSensor->getKmph();
float speedNowOther = (*ppOtherMotor)->getCurrentSpeed();
float speedTargetThis = speedTarget;
float speedTargetOther = (*ppOtherMotor)->getTargetSpeed();
float dutyTargetOther = (*ppOtherMotor)->getTargetDuty();
float dutyTargetThis = dutyTarget;
float dutyNowOther = (*ppOtherMotor)->getDuty();
float dutyNowThis = dutyNow;
//calculate expected ratio
float ratioSpeedTarget = speedTargetThis / speedTargetOther;
//calculate current ratio of actual measured rotational speed
float ratioSpeedNow = speedNowThis / speedNowOther;
//calculate current duty ration (logging only)
float ratioDutyNow = dutyNowThis / dutyNowOther;
//calculate unexpected difference
float ratioDiff = ratioSpeedNow - ratioSpeedTarget;
if(log) ESP_LOGD("TESTING", "[%s] TCS: speedThis=%.3f, speedOther=%.3f, ratioSpeedTarget=%.3f, ratioSpeedNow=%.3f, ratioDutyNow=%.3f, diff=%.3f", config.name, speedNowThis, speedNowOther, ratioSpeedTarget, ratioSpeedNow, ratioDutyNow, ratioDiff);
//-- handle rotating faster than expected --
//TODO also increase duty when other motor is slipping? (diff negative)
if (speedNowThis < TCS_MIN_SPEED_KMH) { //disable / turn off TCS when currently too slow (danger of deadlock)
tcs_isExceeded = false;
tcs_usExceeded = 0;
}
else if (ratioDiff > TCS_MAX_ALLOWED_RATIO_DIFF ) // motor turns too fast compared to expected target ratio
{
if (!tcs_isExceeded) // just started being too fast
{
tcs_timestampBeginExceeded = esp_timer_get_time();
tcs_isExceeded = true; //also blocks further acceleration (fade)
if(log) ESP_LOGW("TESTING", "[%s] TCS: now exceeding max allowed ratio diff! diff=%.2f max=%.2f", config.name, ratioDiff, TCS_MAX_ALLOWED_RATIO_DIFF);
}
else
{ // too fast for more than 2 cycles already
tcs_usExceeded = esp_timer_get_time() - tcs_timestampBeginExceeded; //time too fast already
if(log) ESP_LOGI("TESTING", "[%s] TCS: faster than expected since %dms, current ratioDiff=%.2f -> slowing down", config.name, tcs_usExceeded/1000, ratioDiff);
// calculate amount duty gets decreased
float dutyDecrement = (tcs_usPassed / ((float)config.msFadeDecel * 1000)) * 100; //TODO optimize dynamic increment: P:scale with ratio-difference, I: scale with duration exceeded
// decrease duty
if(log) ESP_LOGI("TESTING", "[%s] TCS: msPassed=%.3f, reducing duty by %.3f%%", config.name, (float)tcs_usPassed/1000, dutyDecrement);
fade(&dutyNow, 0, -dutyDecrement); //reduce duty but not less than 0
}
}
else
{ // not exceeded
tcs_isExceeded = false;
tcs_usExceeded = 0;
}
}
else // TCS mode not active or timed out
{ // not exceeded
tcs_isExceeded = false;
tcs_usExceeded = 0;
}
//--- define new motorstate --- (-100 to 100 => direction)
state=getStateFromDuty(dutyNow);
//--- DEAD TIME ----
//ensure minimum idle time between direction change to prevent driver overload
//FWD -> IDLE -> FWD continue without waiting
//FWD -> IDLE -> REV wait for dead-time in IDLE
//TODO check when changed only?
if (config.deadTimeMs > 0) { //deadTime is enabled
if ( //not enough time between last direction state
( state == motorstate_t::FWD && (esp_log_timestamp() - timestampsModeLastActive[(int)motorstate_t::REV] < config.deadTimeMs))
|| (state == motorstate_t::REV && (esp_log_timestamp() - timestampsModeLastActive[(int)motorstate_t::FWD] < config.deadTimeMs))
){
if(log) ESP_LOGD(TAG, "waiting dead-time... dir change %s -> %s", motorstateStr[(int)statePrev], motorstateStr[(int)state]);
if (!deadTimeWaiting){ //log start
deadTimeWaiting = true;
if(log) ESP_LOGI(TAG, "starting dead-time... %s -> %s", motorstateStr[(int)statePrev], motorstateStr[(int)state]);
}
//force IDLE state during wait
state = motorstate_t::IDLE;
dutyNow = 0;
} else {
if (deadTimeWaiting){ //log end
deadTimeWaiting = false;
if(log) ESP_LOGI(TAG, "dead-time ended - continue with %s", motorstateStr[(int)state]);
}
if(log) ESP_LOGV(TAG, "deadtime: no change below deadtime detected... dir=%s, duty=%.1f", motorstateStr[(int)state], dutyNow);
}
}
//--- save current actual motorstate and timestamp ---
//needed for deadtime
timestampsModeLastActive[(int)getStateFromDuty(dutyNow)] = esp_log_timestamp();
//(-100 to 100 => direction)
statePrev = getStateFromDuty(dutyNow);
//--- apply new target to motor ---
motorSetCommand({state, (float)fabs(dutyNow)});
if(log) ESP_LOGI(TAG, "[%s] Set Motordriver: state=%s, duty=%.2f - Measurements: current=%.2f, speed=N/A", config.name, motorstateStr[(int)state], dutyNow, currentNow);
//note: BRAKE state is handled earlier
//--- update timestamp ---
timestampLastRunUs = esp_timer_get_time(); //update timestamp last run with current timestamp in microseconds
}
//===============================
//========== setTarget ==========
//===============================
//function to set the target mode and duty of a motor
//puts the provided command in a queue for the handle function running in another task
void controlledMotor::setTarget(motorCommand_t commandSend){
if(log) ESP_LOGI(TAG, "[%s] setTarget: Inserting command to queue: state='%s'(%d), duty=%.2f", config.name, motorstateStr[(int)commandSend.state], (int)commandSend.state, commandSend.duty);
//send command to queue (overwrite if an old command is still in the queue and not processed)
xQueueOverwrite( commandQueue, ( void * )&commandSend);
//xQueueSend( commandQueue, ( void * )&commandSend, ( TickType_t ) 0 );
if(log) ESP_LOGD(TAG, "finished inserting new command");
}
// accept target state and duty as separate agrguments:
void controlledMotor::setTarget(motorstate_t state_f, float duty_f){
// create motorCommand struct from the separate parameters, and run the method to insert that new command
setTarget({state_f, duty_f});
}
//===============================
//========== getStatus ==========
//===============================
//function which returns the current status of the motor in a motorCommand_t struct
motorCommand_t controlledMotor::getStatus(){
motorCommand_t status = {
.state = state,
.duty = dutyNow
};
//TODO: mutex
return status;
};
//===============================
//=========== getFade ===========
//===============================
//return currently configured accel / decel time
uint32_t controlledMotor::getFade(fadeType_t fadeType){
switch(fadeType){
case fadeType_t::ACCEL:
return config.msFadeAccel;
break;
case fadeType_t::DECEL:
return config.msFadeDecel;
break;
}
return 0;
}
//==============================
//======= getFadeDefault =======
//==============================
//return default accel / decel time (from config)
uint32_t controlledMotor::getFadeDefault(fadeType_t fadeType){
switch(fadeType){
case fadeType_t::ACCEL:
return configDefault.msFadeAccel;
break;
case fadeType_t::DECEL:
return configDefault.msFadeDecel;
break;
}
return 0;
}
//===============================
//=========== setFade ===========
//===============================
//function for editing or enabling the fading/ramp of the motor control
//set/update fading duration/amount
void controlledMotor::setFade(fadeType_t fadeType, uint32_t msFadeNew, bool writeToNvs){
//TODO: mutex for msFade variable also used in handle function
switch(fadeType){
case fadeType_t::ACCEL:
ESP_LOGW(TAG, "[%s] changed fade-up time from %d to %d", config.name, config.msFadeAccel, msFadeNew);
if (writeToNvs)
writeAccelDuration(msFadeNew);
else
config.msFadeAccel = msFadeNew;
break;
case fadeType_t::DECEL:
ESP_LOGW(TAG, "[%s] changed fade-down time from %d to %d",config.name, config.msFadeDecel, msFadeNew);
// write new value to nvs and update the variable
if (writeToNvs)
writeDecelDuration(msFadeNew);
else
config.msFadeDecel = msFadeNew;
break;
}
}
//enable (set to default value) or disable fading
void controlledMotor::setFade(fadeType_t fadeType, bool enabled){
uint32_t msFadeNew = 0; //define new fade time as default disabled
if(enabled){ //enable
//set to default/configured value
switch(fadeType){
case fadeType_t::ACCEL:
msFadeNew = config.msFadeAccel;
break;
case fadeType_t::DECEL:
msFadeNew = config.msFadeDecel;
break;
}
}
//apply new Fade value
setFade(fadeType, msFadeNew);
}
//==================================
//=========== toggleFade ===========
//==================================
//toggle fading between OFF and default value
bool controlledMotor::toggleFade(fadeType_t fadeType){
uint32_t msFadeNew = 0;
bool enabled = false;
switch(fadeType){
case fadeType_t::ACCEL:
if (config.msFadeAccel == 0){
msFadeNew = configDefault.msFadeAccel;
enabled = true;
} else {
msFadeNew = 0;
}
break;
case fadeType_t::DECEL:
if (config.msFadeDecel == 0){
msFadeNew = configDefault.msFadeAccel;
enabled = true;
} else {
msFadeNew = 0;
}
break;
}
//apply new Fade value
setFade(fadeType, msFadeNew);
//return new state (fading enabled/disabled)
return enabled;
}
//-----------------------------
//----- loadAccelDuration -----
//-----------------------------
// load stored value from nvs if not successfull uses config default value
void controlledMotor::loadAccelDuration(void)
{
// read from nvs
uint32_t valueNew;
char key[15];
snprintf(key, 15, "m-%s-accel", config.name);
esp_err_t err = nvs_get_u32(*nvsHandle, key, &valueNew);
switch (err)
{
case ESP_OK:
ESP_LOGW(TAG, "Successfully read value '%s' from nvs. Overriding default value %d with %d", key, configDefault.msFadeAccel, valueNew);
config.msFadeAccel = valueNew;
break;
case ESP_ERR_NVS_NOT_FOUND:
ESP_LOGW(TAG, "nvs: the value '%s' is not initialized yet, keeping default value %d", key, config.msFadeAccel);
break;
default:
ESP_LOGE(TAG, "Error (%s) reading nvs!", esp_err_to_name(err));
}
}
//-----------------------------
//----- loadDecelDuration -----
//-----------------------------
void controlledMotor::loadDecelDuration(void)
{
// read from nvs
uint32_t valueNew;
char key[15];
snprintf(key, 15, "m-%s-decel", config.name);
esp_err_t err = nvs_get_u32(*nvsHandle, key, &valueNew);
switch (err)
{
case ESP_OK:
ESP_LOGW(TAG, "Successfully read value '%s' from nvs. Overriding default value %d with %d", key, config.msFadeDecel, valueNew);
config.msFadeDecel = valueNew;
break;
case ESP_ERR_NVS_NOT_FOUND:
ESP_LOGW(TAG, "nvs: the value '%s' is not initialized yet, keeping default value %d", key, config.msFadeDecel);
break;
default:
ESP_LOGE(TAG, "Error (%s) reading nvs!", esp_err_to_name(err));
}
}
//------------------------------
//----- writeAccelDuration -----
//------------------------------
// write provided value to nvs to be persistent and update the local config
void controlledMotor::writeAccelDuration(uint32_t newValue)
{
// check if unchanged
if(config.msFadeAccel == newValue){
ESP_LOGW(TAG, "value unchanged at %d, not writing to nvs", newValue);
return;
}
// generate nvs storage key
char key[15];
snprintf(key, 15, "m-%s-accel", config.name);
// update nvs value
ESP_LOGW(TAG, "[%s] updating nvs value '%s' from %d to %d", config.name, key, config.msFadeAccel, newValue);
esp_err_t err = nvs_set_u32(*nvsHandle, key, newValue);
if (err != ESP_OK)
ESP_LOGE(TAG, "nvs: failed writing");
err = nvs_commit(*nvsHandle);
if (err != ESP_OK)
ESP_LOGE(TAG, "nvs: failed committing updates");
else
ESP_LOGI(TAG, "nvs: successfully committed updates");
// update variable
config.msFadeAccel = newValue;
}
//------------------------------
//----- writeDecelDuration -----
//------------------------------
// write provided value to nvs to be persistent and update the local config
// TODO: reduce duplicate code
void controlledMotor::writeDecelDuration(uint32_t newValue)
{
// check if unchanged
if(config.msFadeDecel == newValue){
ESP_LOGW(TAG, "value unchanged at %d, not writing to nvs", newValue);
return;
}
// generate nvs storage key
char key[15];
snprintf(key, 15, "m-%s-decel", config.name);
// update nvs value
ESP_LOGW(TAG, "[%s] updating nvs value '%s' from %d to %d", config.name, key, config.msFadeDecel, newValue);
esp_err_t err = nvs_set_u32(*nvsHandle, key, newValue);
if (err != ESP_OK)
ESP_LOGE(TAG, "nvs: failed writing");
err = nvs_commit(*nvsHandle);
if (err != ESP_OK)
ESP_LOGE(TAG, "nvs: failed committing updates");
else
ESP_LOGI(TAG, "nvs: successfully committed updates");
// update variable
config.msFadeDecel = newValue;
}