armchair_fw/hardware/chairAdjust-relayBoard/pcb2gcode/out/back.ngc

( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.80000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-0.12546 Y0.72452 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-0.12546 Y0.72452
G01 X-0.12546 Y78.06551
G01 X-0.13552 Y78.15456
G01 X-0.15523 Y78.24090
G01 X-0.18479 Y78.32543
G01 X-0.23244 Y78.40125
G01 X-0.28766 Y78.47049
G01 X-0.35098 Y78.53381
G01 X-0.42680 Y78.58146
G01 X-0.50658 Y78.61989
G01 X-0.56937 Y78.64387
G01 X-0.63529 Y78.65700
G01 X-0.67958 Y78.66200
G01 X-0.72449 Y78.66454
G01 X-36.02099 Y78.66454
G01 X-36.11002 Y78.65448
G01 X-36.19635 Y78.63477
G01 X-36.28088 Y78.60521
G01 X-36.35670 Y78.55756
G01 X-36.42594 Y78.50234
G01 X-36.48927 Y78.43902
G01 X-36.53692 Y78.36320
G01 X-36.57535 Y78.28342
G01 X-36.59932 Y78.22063
G01 X-36.61246 Y78.15471
G01 X-36.61746 Y78.11042
G01 X-36.62000 Y78.06551
G01 X-36.62000 Y68.84584
G01 X-47.09625 Y63.29960
G01 X-47.17030 Y63.24905
G01 X-47.23738 Y63.19122
G01 X-47.29821 Y63.12553
G01 X-47.34291 Y63.04799
G01 X-47.37827 Y62.96681
G01 X-47.39890 Y62.90684
G01 X-47.40979 Y62.84438
G01 X-47.41325 Y62.80750
G01 X-47.41500 Y62.77019
G01 X-47.41500 Y0.72452
G01 X-47.40494 Y0.63549
G01 X-47.38523 Y0.54915
G01 X-47.35566 Y0.46462
G01 X-47.30801 Y0.38880
G01 X-47.25279 Y0.31956
G01 X-47.18945 Y0.25622
G01 X-47.11360 Y0.20857
G01 X-47.03380 Y0.17014
G01 X-46.97106 Y0.14618
G01 X-46.90517 Y0.13305
G01 X-46.86090 Y0.12805
G01 X-46.81599 Y0.12551
G01 X-0.72449 Y0.12551
G01 X-0.63544 Y0.13557
G01 X-0.54910 Y0.15528
G01 X-0.46457 Y0.18484
G01 X-0.38875 Y0.23249
G01 X-0.31951 Y0.28771
G01 X-0.25619 Y0.35103
G01 X-0.20854 Y0.42685
G01 X-0.17011 Y0.50663
G01 X-0.14613 Y0.56942
G01 X-0.13300 Y0.63534
G01 X-0.12800 Y0.67963
G01 X-0.12546 Y0.72452
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-3.23950 Y5.59961 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.23950 Y5.59961
G01 X-3.23950 Y5.88054
G01 X-3.24227 Y5.90528
G01 X-3.27092 Y6.15953
G01 X-3.33343 Y6.43334
G01 X-3.42619 Y6.69844
G01 X-3.54803 Y6.95148
G01 X-3.69743 Y7.18927
G01 X-3.87254 Y7.40883
G01 X-4.07117 Y7.60746
G01 X-4.29073 Y7.78257
G01 X-4.52852 Y7.93197
G01 X-4.78156 Y8.05381
G01 X-5.04666 Y8.14657
G01 X-5.32047 Y8.20908
G01 X-5.57472 Y8.23773
G01 X-5.59946 Y8.24050
G01 X-5.88044 Y8.24050
G01 X-5.91323 Y8.23682
G01 X-6.15946 Y8.20908
G01 X-6.43329 Y8.14657
G01 X-6.69837 Y8.05381
G01 X-6.95143 Y7.93197
G01 X-7.18920 Y7.78257
G01 X-7.40878 Y7.60746
G01 X-7.60741 Y7.40883
G01 X-7.78249 Y7.18927
G01 X-7.93192 Y6.95148
G01 X-8.05376 Y6.69844
G01 X-8.14652 Y6.43334
G01 X-8.20901 Y6.15956
G01 X-8.24045 Y5.88044
G01 X-8.24045 Y5.59961
G01 X-8.20901 Y5.32049
G01 X-8.14652 Y5.04673
G01 X-8.05376 Y4.78161
G01 X-7.93192 Y4.52857
G01 X-7.78249 Y4.29078
G01 X-7.60741 Y4.07125
G01 X-7.40878 Y3.87259
G01 X-7.18922 Y3.69751
G01 X-6.95143 Y3.54808
G01 X-6.69839 Y3.42624
G01 X-6.43329 Y3.33350
G01 X-6.15951 Y3.27102
G01 X-5.88039 Y3.23957
G01 X-5.59956 Y3.23957
G01 X-5.32044 Y3.27102
G01 X-5.04666 Y3.33350
G01 X-4.78156 Y3.42624
G01 X-4.52852 Y3.54808
G01 X-4.29073 Y3.69751
G01 X-4.07117 Y3.87259
G01 X-3.87254 Y4.07125
G01 X-3.69743 Y4.29080
G01 X-3.54803 Y4.52857
G01 X-3.42619 Y4.78163
G01 X-3.33343 Y5.04673
G01 X-3.27094 Y5.32052
G01 X-3.23950 Y5.59961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-2.33691 Y32.83581 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.33691 Y32.83581
G01 X-2.35997 Y32.60169
G01 X-2.37526 Y32.52478
G01 X-2.44356 Y32.29969
G01 X-2.47356 Y32.22722
G01 X-2.58446 Y32.01978
G01 X-2.62802 Y31.95458
G01 X-2.77724 Y31.77274
G01 X-2.83269 Y31.71729
G01 X-3.01455 Y31.56804
G01 X-3.07976 Y31.52448
G01 X-3.28720 Y31.41358
G01 X-3.35966 Y31.38359
G01 X-3.58476 Y31.31529
G01 X-3.66167 Y31.29999
G01 X-3.89578 Y31.27693
G01 X-3.97419 Y31.27693
G01 X-4.20830 Y31.29999
G01 X-4.28522 Y31.31529
G01 X-4.51031 Y31.38359
G01 X-4.58278 Y31.41358
G01 X-4.79022 Y31.52448
G01 X-4.85542 Y31.56804
G01 X-5.03728 Y31.71729
G01 X-5.09273 Y31.77274
G01 X-5.24196 Y31.95458
G01 X-5.25562 Y31.97502
G01 X-7.47500 Y31.97502
G01 X-7.51419 Y31.97696
G01 X-7.61173 Y31.98656
G01 X-7.68864 Y32.00187
G01 X-7.78244 Y32.03032
G01 X-7.85488 Y32.06032
G01 X-7.94132 Y32.10652
G01 X-8.00652 Y32.15008
G01 X-8.08229 Y32.21226
G01 X-8.11137 Y32.23863
G01 X-9.05368 Y33.18092
G01 X-9.11276 Y33.13243
G01 X-9.18190 Y33.09547
G01 X-9.25696 Y33.07269
G01 X-9.28498 Y33.06994
G01 X-9.28498 Y18.18600
G01 X-9.28691 Y18.14681
G01 X-9.29653 Y18.04927
G01 X-9.31182 Y17.97236
G01 X-9.34027 Y17.87856
G01 X-9.37027 Y17.80612
G01 X-9.41647 Y17.71968
G01 X-9.46006 Y17.65448
G01 X-9.52224 Y17.57871
G01 X-9.54860 Y17.54963
G01 X-11.55838 Y15.53983
G01 X-11.55759 Y15.53719
G01 X-11.54227 Y15.46030
G01 X-11.52691 Y15.30422
G01 X-11.52691 Y15.22581
G01 X-11.54227 Y15.06972
G01 X-11.55759 Y14.99284
G01 X-11.60311 Y14.84275
G01 X-11.63310 Y14.77031
G01 X-11.70704 Y14.63201
G01 X-11.75061 Y14.56680
G01 X-11.82498 Y14.47618
G01 X-11.82498 Y12.24385
G01 X-11.75061 Y12.15322
G01 X-11.70704 Y12.08802
G01 X-11.63310 Y11.94972
G01 X-11.60311 Y11.87727
G01 X-11.55759 Y11.72719
G01 X-11.54227 Y11.65030
G01 X-11.52691 Y11.49422
G01 X-11.52691 Y11.41581
G01 X-11.54227 Y11.25972
G01 X-11.55759 Y11.18284
G01 X-11.60311 Y11.03275
G01 X-11.63310 Y10.96031
G01 X-11.70704 Y10.82201
G01 X-11.75061 Y10.75680
G01 X-11.85010 Y10.63557
G01 X-11.90555 Y10.58012
G01 X-12.02678 Y10.48063
G01 X-12.09198 Y10.43707
G01 X-12.23028 Y10.36313
G01 X-12.30273 Y10.33313
G01 X-12.45281 Y10.28762
G01 X-12.52970 Y10.27230
G01 X-12.68578 Y10.25693
G01 X-12.76419 Y10.25693
G01 X-12.92028 Y10.27230
G01 X-12.99716 Y10.28762
G01 X-13.14725 Y10.33313
G01 X-13.21969 Y10.36313
G01 X-13.35799 Y10.43707
G01 X-13.42320 Y10.48063
G01 X-13.54443 Y10.58012
G01 X-13.59988 Y10.63557
G01 X-13.69937 Y10.75680
G01 X-13.74293 Y10.82201
G01 X-13.81687 Y10.96031
G01 X-13.84687 Y11.03275
G01 X-13.89238 Y11.18284
G01 X-13.90770 Y11.25972
G01 X-13.92307 Y11.41581
G01 X-13.92307 Y11.49422
G01 X-13.90770 Y11.65030
G01 X-13.89238 Y11.72719
G01 X-13.84687 Y11.87727
G01 X-13.81687 Y11.94972
G01 X-13.74293 Y12.08802
G01 X-13.69937 Y12.15322
G01 X-13.62500 Y12.24385
G01 X-13.62500 Y14.47618
G01 X-13.69937 Y14.56680
G01 X-13.74293 Y14.63201
G01 X-13.81687 Y14.77031
G01 X-13.84687 Y14.84275
G01 X-13.89238 Y14.99284
G01 X-13.90770 Y15.06972
G01 X-13.92307 Y15.22581
G01 X-13.92307 Y15.30422
G01 X-13.90770 Y15.46030
G01 X-13.89238 Y15.53719
G01 X-13.84687 Y15.68727
G01 X-13.81687 Y15.75972
G01 X-13.74293 Y15.89802
G01 X-13.69937 Y15.96322
G01 X-13.59988 Y16.08445
G01 X-13.54443 Y16.13990
G01 X-13.42320 Y16.23939
G01 X-13.36531 Y16.27808
G01 X-13.36137 Y16.28240
G01 X-11.08500 Y18.55880
G01 X-11.08500 Y33.06994
G01 X-11.11301 Y33.07269
G01 X-11.18807 Y33.09547
G01 X-11.25721 Y33.13243
G01 X-11.31784 Y33.18216
G01 X-11.35998 Y33.23352
G01 X-11.36757 Y33.24279
G01 X-11.40453 Y33.31193
G01 X-11.42731 Y33.38699
G01 X-11.43498 Y33.46501
G01 X-11.43498 Y35.16501
G01 X-11.42731 Y35.24304
G01 X-11.40453 Y35.31810
G01 X-11.36757 Y35.38724
G01 X-11.31784 Y35.44787
G01 X-11.25721 Y35.49760
G01 X-11.18807 Y35.53456
G01 X-11.11301 Y35.55734
G01 X-11.03499 Y35.56501
G01 X-9.33499 Y35.56501
G01 X-9.25696 Y35.55734
G01 X-9.18190 Y35.53456
G01 X-9.11276 Y35.49760
G01 X-9.05213 Y35.44787
G01 X-9.00240 Y35.38724
G01 X-8.96544 Y35.31810
G01 X-8.94266 Y35.24304
G01 X-8.93992 Y35.21502
G01 X-8.91500 Y35.21502
G01 X-8.87578 Y35.21309
G01 X-8.77825 Y35.20349
G01 X-8.70134 Y35.18818
G01 X-8.60753 Y35.15973
G01 X-8.53509 Y35.12973
G01 X-8.44866 Y35.08353
G01 X-8.38345 Y35.03997
G01 X-8.30769 Y34.97779
G01 X-8.27860 Y34.95142
G01 X-7.10220 Y33.77505
G01 X-5.25560 Y33.77505
G01 X-5.24196 Y33.79544
G01 X-5.09273 Y33.97731
G01 X-5.03728 Y34.03276
G01 X-4.85542 Y34.18198
G01 X-4.79022 Y34.22554
G01 X-4.58278 Y34.33644
G01 X-4.51031 Y34.36643
G01 X-4.28522 Y34.43474
G01 X-4.20830 Y34.45003
G01 X-3.97419 Y34.47309
G01 X-3.89578 Y34.47309
G01 X-3.66167 Y34.45003
G01 X-3.58476 Y34.43474
G01 X-3.35966 Y34.36643
G01 X-3.28720 Y34.33644
G01 X-3.07976 Y34.22554
G01 X-3.01455 Y34.18198
G01 X-2.83269 Y34.03276
G01 X-2.77724 Y33.97731
G01 X-2.62802 Y33.79544
G01 X-2.58446 Y33.73027
G01 X-2.47356 Y33.52280
G01 X-2.44356 Y33.45036
G01 X-2.37526 Y33.22524
G01 X-2.35997 Y33.14833
G01 X-2.33691 Y32.91422
G01 X-2.33691 Y32.83581
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-2.33038 Y32.87502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.33038 Y32.87502
G01 X-2.34671 Y33.10337
G01 X-2.39538 Y33.32709
G01 X-2.47539 Y33.54160
G01 X-2.58509 Y33.74251
G01 X-2.72233 Y33.92582
G01 X-2.88420 Y34.08770
G01 X-2.96142 Y34.14551
G01 X-2.97107 Y34.15295
G01 X-2.98059 Y34.16054
G01 X-3.05146 Y34.23362
G01 X-3.10452 Y34.30451
G01 X-3.14981 Y34.38175
G01 X-3.17678 Y34.46712
G01 X-3.19385 Y34.55404
G01 X-3.20117 Y34.64337
G01 X-3.18842 Y34.73207
G01 X-3.16607 Y34.81777
G01 X-3.13391 Y34.90133
G01 X-3.08397 Y34.97565
G01 X-3.02667 Y35.04317
G01 X-2.96142 Y35.10453
G01 X-2.88420 Y35.16234
G01 X-2.72230 Y35.32424
G01 X-2.58509 Y35.50750
G01 X-2.47539 Y35.70844
G01 X-2.39538 Y35.92297
G01 X-2.34671 Y36.14670
G01 X-2.33038 Y36.37502
G01 X-2.34671 Y36.60336
G01 X-2.39538 Y36.82709
G01 X-2.47539 Y37.04161
G01 X-2.58509 Y37.24250
G01 X-2.72233 Y37.42581
G01 X-2.88420 Y37.58771
G01 X-2.96142 Y37.64552
G01 X-2.97056 Y37.65256
G01 X-2.98009 Y37.66013
G01 X-3.05151 Y37.73366
G01 X-3.10457 Y37.80458
G01 X-3.14983 Y37.88179
G01 X-3.17678 Y37.96711
G01 X-3.19385 Y38.05401
G01 X-3.20117 Y38.14334
G01 X-3.18842 Y38.23206
G01 X-3.16607 Y38.31776
G01 X-3.13391 Y38.40133
G01 X-3.08397 Y38.47565
G01 X-3.02667 Y38.54316
G01 X-2.96147 Y38.60450
G01 X-2.88423 Y38.66236
G01 X-2.72230 Y38.82426
G01 X-2.58509 Y39.00752
G01 X-2.47539 Y39.20846
G01 X-2.39538 Y39.42297
G01 X-2.34671 Y39.64669
G01 X-2.33038 Y39.87501
G01 X-2.34671 Y40.10336
G01 X-2.39538 Y40.32708
G01 X-2.47539 Y40.54161
G01 X-2.58509 Y40.74255
G01 X-2.73201 Y40.93879
G01 X-2.76480 Y40.99035
G01 X-2.79332 Y41.04387
G01 X-2.82233 Y41.11341
G01 X-2.83780 Y41.18717
G01 X-2.84773 Y41.27518
G01 X-2.84775 Y41.36480
G01 X-2.82779 Y41.45217
G01 X-2.79853 Y41.53576
G01 X-2.75969 Y41.61641
G01 X-2.70389 Y41.68641
G01 X-2.64128 Y41.74905
G01 X-2.57120 Y41.80495
G01 X-2.48367 Y41.85994
G01 X-2.41989 Y41.92372
G01 X-2.37183 Y42.00018
G01 X-2.34204 Y42.08534
G01 X-2.33450 Y42.15250
G01 X-2.33450 Y44.59753
G01 X-2.34204 Y44.66474
G01 X-2.37183 Y44.74988
G01 X-2.41989 Y44.82633
G01 X-2.48367 Y44.89011
G01 X-2.56010 Y44.93814
G01 X-2.64529 Y44.96794
G01 X-2.71250 Y44.97551
G01 X-5.15748 Y44.97551
G01 X-5.22468 Y44.96796
G01 X-5.30983 Y44.93817
G01 X-5.38628 Y44.89011
G01 X-5.45006 Y44.82633
G01 X-5.49812 Y44.74988
G01 X-5.52374 Y44.67665
G01 X-5.55115 Y44.61536
G01 X-5.58338 Y44.55702
G01 X-5.62786 Y44.49240
G01 X-5.68412 Y44.43771
G01 X-5.75336 Y44.38249
G01 X-5.82920 Y44.33484
G01 X-5.91374 Y44.30525
G01 X-6.00010 Y44.28554
G01 X-6.08912 Y44.27551
G01 X-7.16484 Y44.27551
G01 X-7.30484 Y44.25333
G01 X-7.37228 Y44.23144
G01 X-7.43967 Y44.20954
G01 X-7.56596 Y44.14521
G01 X-7.68061 Y44.06189
G01 X-8.26192 Y43.48059
G01 X-8.27804 Y43.46532
G01 X-8.29468 Y43.45044
G01 X-8.38785 Y43.38816
G01 X-8.46766 Y43.34973
G01 X-8.55219 Y43.32014
G01 X-8.64121 Y43.31011
G01 X-8.72976 Y43.31011
G01 X-8.81876 Y43.32014
G01 X-8.90329 Y43.34973
G01 X-8.93270 Y43.36388
G01 X-8.98310 Y43.38816
G01 X-9.05894 Y43.43581
G01 X-9.12229 Y43.49916
G01 X-9.17751 Y43.56840
G01 X-9.22516 Y43.64424
G01 X-9.25475 Y43.72877
G01 X-9.27446 Y43.81513
G01 X-9.28449 Y43.90413
G01 X-9.28449 Y58.87591
G01 X-9.30664 Y59.01589
G01 X-9.35046 Y59.15069
G01 X-9.39442 Y59.23702
G01 X-9.41457 Y59.27655
G01 X-9.41477 Y59.27695
G01 X-9.49811 Y59.39166
G01 X-11.02320 Y60.91675
G01 X-11.03702 Y60.93128
G01 X-11.05048 Y60.94616
G01 X-11.11225 Y61.03692
G01 X-11.15157 Y61.11629
G01 X-11.18208 Y61.20047
G01 X-11.21969 Y61.35714
G01 X-11.29203 Y61.53173
G01 X-11.37621 Y61.66915
G01 X-11.38622 Y61.68642
G01 X-11.39584 Y61.70405
G01 X-11.43476 Y61.80684
G01 X-11.45444 Y61.89318
G01 X-11.46447 Y61.98208
G01 X-11.46447 Y63.79795
G01 X-11.46397 Y63.81768
G01 X-11.46298 Y63.83775
G01 X-11.44248 Y63.94593
G01 X-11.41416 Y64.02985
G01 X-11.37621 Y64.11095
G01 X-11.29201 Y64.24832
G01 X-11.21969 Y64.42292
G01 X-11.17560 Y64.60661
G01 X-11.16077 Y64.79503
G01 X-11.17560 Y64.98342
G01 X-11.21969 Y65.16716
G01 X-11.29201 Y65.34173
G01 X-11.39074 Y65.50285
G01 X-11.51347 Y65.64653
G01 X-11.65716 Y65.76927
G01 X-11.81827 Y65.86800
G01 X-11.99285 Y65.94031
G01 X-12.17656 Y65.98441
G01 X-12.36498 Y65.99924
G01 X-12.55337 Y65.98441
G01 X-12.63590 Y65.96459
G01 X-12.73709 Y65.94031
G01 X-12.91169 Y65.86800
G01 X-13.07278 Y65.76927
G01 X-13.21646 Y65.64653
G01 X-13.33920 Y65.50285
G01 X-13.43793 Y65.34173
G01 X-13.51024 Y65.16714
G01 X-13.55436 Y64.98339
G01 X-13.56919 Y64.79503
G01 X-13.55436 Y64.60666
G01 X-13.51024 Y64.42292
G01 X-13.43793 Y64.24832
G01 X-13.36836 Y64.13480
G01 X-13.35368 Y64.11083
G01 X-13.34364 Y64.09345
G01 X-13.33402 Y64.07580
G01 X-13.29523 Y63.97334
G01 X-13.27552 Y63.88700
G01 X-13.26546 Y63.79795
G01 X-13.26546 Y61.98208
G01 X-13.26599 Y61.96186
G01 X-13.26701 Y61.94179
G01 X-13.28751 Y61.83410
G01 X-13.31583 Y61.75020
G01 X-13.35375 Y61.66915
G01 X-13.43793 Y61.53176
G01 X-13.51024 Y61.35714
G01 X-13.55436 Y61.17339
G01 X-13.56919 Y60.98503
G01 X-13.55436 Y60.79666
G01 X-13.51024 Y60.61292
G01 X-13.43793 Y60.43832
G01 X-13.33922 Y60.27723
G01 X-13.21649 Y60.13352
G01 X-13.07278 Y60.01078
G01 X-12.91169 Y59.91205
G01 X-12.73709 Y59.83974
G01 X-12.58042 Y59.80215
G01 X-12.56089 Y59.79691
G01 X-12.54164 Y59.79125
G01 X-12.44176 Y59.74624
G01 X-12.36676 Y59.69912
G01 X-12.29668 Y59.64324
G01 X-11.26092 Y58.60746
G01 X-11.21759 Y58.55615
G01 X-11.17900 Y58.50179
G01 X-11.14009 Y58.43367
G01 X-11.11522 Y58.35930
G01 X-11.09551 Y58.27297
G01 X-11.08546 Y58.18391
G01 X-11.08546 Y49.50390
G01 X-11.09074 Y49.43913
G01 X-11.10118 Y49.37552
G01 X-11.12102 Y49.30080
G01 X-11.15485 Y49.23130
G01 X-11.20113 Y49.15579
G01 X-11.25622 Y49.08513
G01 X-11.32564 Y49.02848
G01 X-11.40011 Y48.98053
G01 X-11.48030 Y48.94080
G01 X-11.49153 Y48.93811
G01 X-11.56732 Y48.91990
G01 X-11.65520 Y48.90898
G01 X-11.74484 Y48.90796
G01 X-11.83244 Y48.92691
G01 X-11.91637 Y48.95523
G01 X-11.99747 Y48.99318
G01 X-12.17829 Y49.10400
G01 X-12.35284 Y49.17631
G01 X-12.53658 Y49.22041
G01 X-12.72497 Y49.23524
G01 X-12.91337 Y49.22041
G01 X-12.99589 Y49.20059
G01 X-13.09711 Y49.17631
G01 X-13.23193 Y49.12046
G01 X-13.27171 Y49.10397
G01 X-13.43280 Y49.00527
G01 X-13.57648 Y48.88253
G01 X-13.69922 Y48.73885
G01 X-13.76048 Y48.63885
G01 X-13.79795 Y48.57771
G01 X-13.87026 Y48.40314
G01 X-13.91435 Y48.21942
G01 X-13.92919 Y48.03103
G01 X-13.91435 Y47.84263
G01 X-13.87026 Y47.65892
G01 X-13.79795 Y47.48434
G01 X-13.73950 Y47.38896
G01 X-13.71372 Y47.34688
G01 X-13.70364 Y47.32945
G01 X-13.69401 Y47.31180
G01 X-13.65522 Y47.20934
G01 X-13.63551 Y47.12300
G01 X-13.62546 Y47.03395
G01 X-13.62546 Y45.47208
G01 X-13.62599 Y45.45186
G01 X-13.62700 Y45.43179
G01 X-13.64750 Y45.32410
G01 X-13.67582 Y45.24020
G01 X-13.71372 Y45.15915
G01 X-13.79795 Y45.02171
G01 X-13.87026 Y44.84714
G01 X-13.91435 Y44.66342
G01 X-13.92919 Y44.47503
G01 X-13.91435 Y44.28663
G01 X-13.87026 Y44.10294
G01 X-13.85131 Y44.05722
G01 X-13.79790 Y43.92826
G01 X-13.71375 Y43.79095
G01 X-13.70364 Y43.77345
G01 X-13.69401 Y43.75580
G01 X-13.65522 Y43.65334
G01 X-13.63551 Y43.56700
G01 X-13.62546 Y43.47795
G01 X-13.62546 Y40.08611
G01 X-13.60331 Y39.94615
G01 X-13.55949 Y39.81136
G01 X-13.49515 Y39.68507
G01 X-13.41184 Y39.57039
G01 X-12.54961 Y38.70816
G01 X-12.43493 Y38.62485
G01 X-12.38825 Y38.60105
G01 X-12.30864 Y38.56048
G01 X-12.21672 Y38.53064
G01 X-12.17080 Y38.51253
G01 X-12.12642 Y38.49178
G01 X-12.06623 Y38.45695
G01 X-12.01299 Y38.41222
G01 X-11.95038 Y38.34959
G01 X-11.89457 Y38.27958
G01 X-11.85574 Y38.19894
G01 X-11.82648 Y38.11535
G01 X-11.80651 Y38.02797
G01 X-11.80654 Y38.00692
G01 X-11.80654 Y37.93836
G01 X-11.81647 Y37.85035
G01 X-11.83641 Y37.76305
G01 X-11.87527 Y37.68238
G01 X-11.92239 Y37.60740
G01 X-11.97821 Y37.53737
G01 X-13.41182 Y36.10377
G01 X-13.49523 Y35.98896
G01 X-13.55949 Y35.86280
G01 X-13.60328 Y35.72805
G01 X-13.60478 Y35.71865
G01 X-13.61090 Y35.68010
G01 X-13.62546 Y35.58800
G01 X-13.62546 Y32.77208
G01 X-13.62599 Y32.75186
G01 X-13.62700 Y32.73179
G01 X-13.64750 Y32.62410
G01 X-13.67582 Y32.54020
G01 X-13.71372 Y32.45920
G01 X-13.76188 Y32.38056
G01 X-13.79795 Y32.32171
G01 X-13.87026 Y32.14714
G01 X-13.91435 Y31.96342
G01 X-13.92919 Y31.77503
G01 X-13.91435 Y31.58663
G01 X-13.87026 Y31.40292
G01 X-13.79792 Y31.22832
G01 X-13.75586 Y31.15966
G01 X-13.71377 Y31.09098
G01 X-13.70364 Y31.07345
G01 X-13.69401 Y31.05580
G01 X-13.65522 Y30.95334
G01 X-13.63551 Y30.86700
G01 X-13.62546 Y30.77795
G01 X-13.62546 Y28.96208
G01 X-13.62599 Y28.94186
G01 X-13.62700 Y28.92179
G01 X-13.64750 Y28.81410
G01 X-13.67582 Y28.73020
G01 X-13.71375 Y28.64915
G01 X-13.79792 Y28.51173
G01 X-13.87026 Y28.33714
G01 X-13.91435 Y28.15342
G01 X-13.92919 Y27.96503
G01 X-13.91435 Y27.77663
G01 X-13.87026 Y27.59292
G01 X-13.79795 Y27.41832
G01 X-13.69922 Y27.25723
G01 X-13.57648 Y27.11352
G01 X-13.43277 Y26.99078
G01 X-13.27168 Y26.89205
G01 X-13.09708 Y26.81974
G01 X-12.91337 Y26.77564
G01 X-12.72497 Y26.76081
G01 X-12.53658 Y26.77564
G01 X-12.35286 Y26.81974
G01 X-12.17827 Y26.89208
G01 X-11.99744 Y27.00287
G01 X-11.93943 Y27.03221
G01 X-11.87974 Y27.05654
G01 X-11.80567 Y27.07867
G01 X-11.72876 Y27.08616
G01 X-11.64022 Y27.08616
G01 X-11.55119 Y27.07613
G01 X-11.46666 Y27.04654
G01 X-11.43725 Y27.03239
G01 X-11.38685 Y27.00811
G01 X-11.31101 Y26.96046
G01 X-11.24766 Y26.89711
G01 X-11.19244 Y26.82787
G01 X-11.14479 Y26.75205
G01 X-11.11522 Y26.66752
G01 X-11.09551 Y26.58118
G01 X-11.08546 Y26.49213
G01 X-11.08546 Y18.80713
G01 X-11.09112 Y18.74010
G01 X-11.10230 Y18.67437
G01 X-11.12295 Y18.59872
G01 X-11.15797 Y18.52860
G01 X-11.20509 Y18.45361
G01 X-11.26092 Y18.38359
G01 X-13.31151 Y16.33299
G01 X-13.34672 Y16.30173
G01 X-13.38344 Y16.27277
G01 X-13.42203 Y16.24585
G01 X-13.43277 Y16.23927
G01 X-13.48723 Y16.19279
G01 X-13.57646 Y16.11653
G01 X-13.69922 Y15.97285
G01 X-13.79792 Y15.81173
G01 X-13.87026 Y15.63714
G01 X-13.91435 Y15.45342
G01 X-13.92919 Y15.26503
G01 X-13.91435 Y15.07663
G01 X-13.87026 Y14.89292
G01 X-13.79795 Y14.71834
G01 X-13.72835 Y14.60480
G01 X-13.71367 Y14.58083
G01 X-13.70364 Y14.56345
G01 X-13.69401 Y14.54580
G01 X-13.65522 Y14.44334
G01 X-13.63551 Y14.35700
G01 X-13.62546 Y14.26795
G01 X-13.62546 Y12.45208
G01 X-13.62599 Y12.43186
G01 X-13.62700 Y12.41179
G01 X-13.64750 Y12.30410
G01 X-13.67582 Y12.22020
G01 X-13.71375 Y12.13915
G01 X-13.79792 Y12.00173
G01 X-13.87026 Y11.82714
G01 X-13.91435 Y11.64342
G01 X-13.92919 Y11.45503
G01 X-13.91435 Y11.26663
G01 X-13.87026 Y11.08292
G01 X-13.79795 Y10.90832
G01 X-13.69922 Y10.74723
G01 X-13.57648 Y10.60352
G01 X-13.43277 Y10.48078
G01 X-13.27168 Y10.38205
G01 X-13.09708 Y10.30974
G01 X-12.91337 Y10.26564
G01 X-12.72497 Y10.25081
G01 X-12.53658 Y10.26564
G01 X-12.35286 Y10.30974
G01 X-12.17827 Y10.38208
G01 X-12.01715 Y10.48078
G01 X-11.87346 Y10.60352
G01 X-11.75073 Y10.74720
G01 X-11.65205 Y10.90824
G01 X-11.57969 Y11.08292
G01 X-11.53559 Y11.26663
G01 X-11.52076 Y11.45503
G01 X-11.53559 Y11.64342
G01 X-11.57969 Y11.82714
G01 X-11.65203 Y12.00173
G01 X-11.73620 Y12.13915
G01 X-11.74621 Y12.15642
G01 X-11.75584 Y12.17405
G01 X-11.79472 Y12.27672
G01 X-11.81444 Y12.36305
G01 X-11.82449 Y12.45208
G01 X-11.82449 Y14.26795
G01 X-11.82396 Y14.28819
G01 X-11.82294 Y14.30826
G01 X-11.80247 Y14.41593
G01 X-11.77415 Y14.49985
G01 X-11.73620 Y14.58095
G01 X-11.65200 Y14.71832
G01 X-11.57969 Y14.89292
G01 X-11.53559 Y15.07663
G01 X-11.52076 Y15.26508
G01 X-11.52183 Y15.27887
G01 X-11.51974 Y15.36152
G01 X-11.50920 Y15.44285
G01 X-11.48896 Y15.52670
G01 X-11.45119 Y15.60424
G01 X-11.40407 Y15.67922
G01 X-11.34824 Y15.74925
G01 X-9.49811 Y17.59939
G01 X-9.41480 Y17.71407
G01 X-9.38261 Y17.77721
G01 X-9.35046 Y17.84036
G01 X-9.30664 Y17.97515
G01 X-9.28449 Y18.11513
G01 X-9.28449 Y31.96489
G01 X-9.28383 Y31.98765
G01 X-9.28256 Y32.00995
G01 X-9.26080 Y32.11925
G01 X-9.23156 Y32.20284
G01 X-9.19267 Y32.28361
G01 X-9.13677 Y32.35369
G01 X-9.07413 Y32.41630
G01 X-9.00413 Y32.47210
G01 X-8.92348 Y32.51094
G01 X-8.83989 Y32.54020
G01 X-8.75252 Y32.56016
G01 X-8.66291 Y32.56014
G01 X-8.57489 Y32.55021
G01 X-8.48759 Y32.53027
G01 X-8.40692 Y32.49141
G01 X-8.33194 Y32.44429
G01 X-8.26192 Y32.38846
G01 X-8.06161 Y32.18816
G01 X-7.94693 Y32.10484
G01 X-7.88379 Y32.07266
G01 X-7.82064 Y32.04051
G01 X-7.76082 Y32.02105
G01 X-7.68587 Y31.99672
G01 X-7.54584 Y31.97454
G01 X-5.54605 Y31.97454
G01 X-5.47896 Y31.96888
G01 X-5.41325 Y31.95770
G01 X-5.33766 Y31.93705
G01 X-5.26756 Y31.90208
G01 X-5.19255 Y31.85496
G01 X-5.12248 Y31.79908
G01 X-4.98575 Y31.66235
G01 X-4.80249 Y31.52514
G01 X-4.60155 Y31.41544
G01 X-4.38702 Y31.33543
G01 X-4.16335 Y31.28676
G01 X-3.93500 Y31.27045
G01 X-3.70650 Y31.28679
G01 X-3.48293 Y31.33543
G01 X-3.26840 Y31.41544
G01 X-3.15375 Y31.47802
G01 X-3.06754 Y31.52511
G01 X-3.06121 Y31.52986
G01 X-2.88420 Y31.66238
G01 X-2.72230 Y31.82425
G01 X-2.58509 Y32.00751
G01 X-2.47539 Y32.20845
G01 X-2.39538 Y32.42298
G01 X-2.34671 Y32.64668
G01 X-2.33038 Y32.87502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-2.33691 Y36.33580 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.33691 Y36.33580
G01 X-2.35997 Y36.10169
G01 X-2.37526 Y36.02480
G01 X-2.44356 Y35.79968
G01 X-2.47356 Y35.72724
G01 X-2.58446 Y35.51977
G01 X-2.62802 Y35.45457
G01 X-2.77724 Y35.27273
G01 X-2.83269 Y35.21728
G01 X-3.01455 Y35.06803
G01 X-3.07976 Y35.02447
G01 X-3.28720 Y34.91358
G01 X-3.35966 Y34.88358
G01 X-3.58476 Y34.81530
G01 X-3.66167 Y34.79999
G01 X-3.89578 Y34.77695
G01 X-3.97419 Y34.77695
G01 X-4.20830 Y34.79999
G01 X-4.28522 Y34.81530
G01 X-4.51031 Y34.88358
G01 X-4.58278 Y34.91358
G01 X-4.79022 Y35.02447
G01 X-4.85542 Y35.06803
G01 X-5.03728 Y35.21728
G01 X-5.09273 Y35.27273
G01 X-5.24196 Y35.45457
G01 X-5.25562 Y35.47502
G01 X-7.29199 Y35.47502
G01 X-7.33118 Y35.47695
G01 X-7.42872 Y35.48655
G01 X-7.50563 Y35.50187
G01 X-7.59943 Y35.53031
G01 X-7.67187 Y35.56031
G01 X-7.75831 Y35.60651
G01 X-7.82351 Y35.65007
G01 X-7.89928 Y35.71225
G01 X-7.92836 Y35.73862
G01 X-8.14477 Y35.95500
G01 X-9.31995 Y35.95500
G01 X-9.33019 Y35.94477
G01 X-9.33936 Y35.93722
G01 X-9.45899 Y35.83905
G01 X-9.52419 Y35.79549
G01 X-9.67116 Y35.71695
G01 X-9.74360 Y35.68693
G01 X-9.90303 Y35.63857
G01 X-9.97995 Y35.62328
G01 X-10.14578 Y35.60695
G01 X-10.22419 Y35.60695
G01 X-10.39003 Y35.62328
G01 X-10.46694 Y35.63857
G01 X-10.62638 Y35.68693
G01 X-10.69882 Y35.71695
G01 X-10.84578 Y35.79549
G01 X-10.91098 Y35.83905
G01 X-11.03140 Y35.93788
G01 X-11.82498 Y35.14431
G01 X-11.82498 Y32.56385
G01 X-11.75061 Y32.47322
G01 X-11.70704 Y32.40802
G01 X-11.63310 Y32.26972
G01 X-11.60311 Y32.19727
G01 X-11.55759 Y32.04719
G01 X-11.54227 Y31.97030
G01 X-11.52691 Y31.81422
G01 X-11.52691 Y31.73581
G01 X-11.54227 Y31.57972
G01 X-11.55759 Y31.50284
G01 X-11.60311 Y31.35275
G01 X-11.63310 Y31.28031
G01 X-11.70704 Y31.14201
G01 X-11.75061 Y31.07680
G01 X-11.82498 Y30.98618
G01 X-11.82498 Y28.75385
G01 X-11.75061 Y28.66322
G01 X-11.70704 Y28.59802
G01 X-11.63310 Y28.45972
G01 X-11.60311 Y28.38727
G01 X-11.55759 Y28.23719
G01 X-11.54227 Y28.16030
G01 X-11.52691 Y28.00422
G01 X-11.52691 Y27.92581
G01 X-11.54227 Y27.76972
G01 X-11.55759 Y27.69284
G01 X-11.60311 Y27.54275
G01 X-11.63310 Y27.47031
G01 X-11.65800 Y27.42378
G01 X-11.70704 Y27.33201
G01 X-11.75061 Y27.26680
G01 X-11.85010 Y27.14557
G01 X-11.90555 Y27.09012
G01 X-12.02678 Y26.99063
G01 X-12.09198 Y26.94707
G01 X-12.23028 Y26.87313
G01 X-12.30273 Y26.84313
G01 X-12.45281 Y26.79762
G01 X-12.52970 Y26.78230
G01 X-12.68578 Y26.76693
G01 X-12.76419 Y26.76693
G01 X-12.92028 Y26.78230
G01 X-12.99716 Y26.79762
G01 X-13.14725 Y26.84313
G01 X-13.21969 Y26.87313
G01 X-13.35799 Y26.94707
G01 X-13.42320 Y26.99063
G01 X-13.54443 Y27.09012
G01 X-13.59988 Y27.14557
G01 X-13.69937 Y27.26680
G01 X-13.74293 Y27.33201
G01 X-13.81687 Y27.47031
G01 X-13.84687 Y27.54275
G01 X-13.89238 Y27.69284
G01 X-13.90770 Y27.76972
G01 X-13.92307 Y27.92581
G01 X-13.92307 Y28.00422
G01 X-13.90770 Y28.16030
G01 X-13.89238 Y28.23719
G01 X-13.84687 Y28.38727
G01 X-13.81687 Y28.45972
G01 X-13.74293 Y28.59802
G01 X-13.69937 Y28.66322
G01 X-13.62500 Y28.75385
G01 X-13.62500 Y30.98618
G01 X-13.69937 Y31.07680
G01 X-13.74293 Y31.14201
G01 X-13.81687 Y31.28031
G01 X-13.84687 Y31.35275
G01 X-13.89238 Y31.50284
G01 X-13.90770 Y31.57972
G01 X-13.92307 Y31.73581
G01 X-13.92307 Y31.81422
G01 X-13.90770 Y31.97030
G01 X-13.89238 Y32.04719
G01 X-13.84687 Y32.19727
G01 X-13.81687 Y32.26972
G01 X-13.74293 Y32.40802
G01 X-13.69937 Y32.47322
G01 X-13.62500 Y32.56385
G01 X-13.62500 Y35.51711
G01 X-13.62307 Y35.55632
G01 X-13.61344 Y35.65388
G01 X-13.59815 Y35.73077
G01 X-13.56970 Y35.82457
G01 X-13.53971 Y35.89701
G01 X-13.49348 Y35.98348
G01 X-13.44992 Y36.04868
G01 X-13.38774 Y36.12445
G01 X-13.36137 Y36.15353
G01 X-12.02345 Y37.49142
G01 X-11.99437 Y37.51779
G01 X-11.91860 Y37.57997
G01 X-11.85340 Y37.62353
G01 X-11.76696 Y37.66973
G01 X-11.69452 Y37.69973
G01 X-11.60072 Y37.72818
G01 X-11.52381 Y37.74349
G01 X-11.42627 Y37.75309
G01 X-11.38708 Y37.75502
G01 X-11.05002 Y37.75502
G01 X-11.03979 Y37.76526
G01 X-10.91098 Y37.87097
G01 X-10.84578 Y37.91454
G01 X-10.69882 Y37.99307
G01 X-10.62638 Y38.02310
G01 X-10.46694 Y38.07146
G01 X-10.39003 Y38.08675
G01 X-10.22419 Y38.10308
G01 X-10.14578 Y38.10308
G01 X-9.97995 Y38.08675
G01 X-9.90303 Y38.07146
G01 X-9.74360 Y38.02310
G01 X-9.67116 Y37.99307
G01 X-9.52419 Y37.91454
G01 X-9.45899 Y37.87097
G01 X-9.33019 Y37.76526
G01 X-9.31995 Y37.75502
G01 X-7.77200 Y37.75502
G01 X-7.73278 Y37.75309
G01 X-7.63525 Y37.74349
G01 X-7.55834 Y37.72818
G01 X-7.46453 Y37.69973
G01 X-7.39209 Y37.66973
G01 X-7.30566 Y37.62353
G01 X-7.24045 Y37.57997
G01 X-7.16469 Y37.51779
G01 X-7.13560 Y37.49142
G01 X-6.91920 Y37.27504
G01 X-5.25560 Y37.27504
G01 X-5.24196 Y37.29546
G01 X-5.09273 Y37.47730
G01 X-5.03728 Y37.53275
G01 X-4.85542 Y37.68197
G01 X-4.79022 Y37.72553
G01 X-4.58278 Y37.83643
G01 X-4.51031 Y37.86645
G01 X-4.31719 Y37.92503
G01 X-4.28522 Y37.93473
G01 X-4.20830 Y37.95002
G01 X-3.97419 Y37.97308
G01 X-3.89578 Y37.97308
G01 X-3.66167 Y37.95002
G01 X-3.58476 Y37.93473
G01 X-3.35966 Y37.86645
G01 X-3.28720 Y37.83643
G01 X-3.07976 Y37.72553
G01 X-3.01455 Y37.68197
G01 X-2.83269 Y37.53275
G01 X-2.77724 Y37.47730
G01 X-2.62802 Y37.29546
G01 X-2.58446 Y37.23026
G01 X-2.47356 Y37.02279
G01 X-2.44356 Y36.95035
G01 X-2.37526 Y36.72523
G01 X-2.35997 Y36.64832
G01 X-2.33691 Y36.41421
G01 X-2.33691 Y36.33580
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-2.33691 Y39.83582 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.33691 Y39.83582
G01 X-2.35997 Y39.60171
G01 X-2.37526 Y39.52479
G01 X-2.44356 Y39.29967
G01 X-2.47356 Y39.22723
G01 X-2.58446 Y39.01977
G01 X-2.62802 Y38.95456
G01 X-2.77724 Y38.77273
G01 X-2.83269 Y38.71728
G01 X-3.01455 Y38.56805
G01 X-3.07976 Y38.52449
G01 X-3.28720 Y38.41359
G01 X-3.35966 Y38.38357
G01 X-3.58476 Y38.31530
G01 X-3.66167 Y38.30001
G01 X-3.89578 Y38.27694
G01 X-3.97419 Y38.27694
G01 X-4.20830 Y38.30001
G01 X-4.28522 Y38.31530
G01 X-4.51031 Y38.38357
G01 X-4.58278 Y38.41359
G01 X-4.79022 Y38.52449
G01 X-4.85542 Y38.56805
G01 X-5.03728 Y38.71728
G01 X-5.09273 Y38.77273
G01 X-5.24196 Y38.95456
G01 X-5.25562 Y38.97501
G01 X-6.66519 Y38.97501
G01 X-6.88160 Y38.75863
G01 X-6.91069 Y38.73226
G01 X-6.98645 Y38.67008
G01 X-7.05166 Y38.62650
G01 X-7.13809 Y38.58029
G01 X-7.21053 Y38.55030
G01 X-7.30434 Y38.52185
G01 X-7.38125 Y38.50656
G01 X-7.47878 Y38.49693
G01 X-7.51800 Y38.49500
G01 X-9.31995 Y38.49500
G01 X-9.33019 Y38.48477
G01 X-9.45899 Y38.37905
G01 X-9.52419 Y38.33549
G01 X-9.67116 Y38.25695
G01 X-9.74360 Y38.22693
G01 X-9.90303 Y38.17857
G01 X-9.97995 Y38.16328
G01 X-10.14578 Y38.14695
G01 X-10.22419 Y38.14695
G01 X-10.39003 Y38.16328
G01 X-10.46694 Y38.17857
G01 X-10.62638 Y38.22693
G01 X-10.69882 Y38.25695
G01 X-10.84578 Y38.33549
G01 X-10.91098 Y38.37905
G01 X-11.03979 Y38.48477
G01 X-11.05002 Y38.49500
G01 X-11.96300 Y38.49500
G01 X-12.00219 Y38.49693
G01 X-12.09973 Y38.50656
G01 X-12.17664 Y38.52185
G01 X-12.27044 Y38.55030
G01 X-12.34288 Y38.58029
G01 X-12.42932 Y38.62650
G01 X-12.49452 Y38.67008
G01 X-12.57029 Y38.73226
G01 X-12.59937 Y38.75863
G01 X-13.36137 Y39.52063
G01 X-13.38774 Y39.54971
G01 X-13.44992 Y39.62548
G01 X-13.49350 Y39.69068
G01 X-13.53971 Y39.77712
G01 X-13.56970 Y39.84956
G01 X-13.59815 Y39.94336
G01 X-13.61344 Y40.02027
G01 X-13.62307 Y40.11781
G01 X-13.62500 Y40.15700
G01 X-13.62500 Y43.68618
G01 X-13.69937 Y43.77680
G01 X-13.74293 Y43.84201
G01 X-13.81687 Y43.98031
G01 X-13.84687 Y44.05275
G01 X-13.89238 Y44.20284
G01 X-13.90770 Y44.27972
G01 X-13.92307 Y44.43581
G01 X-13.92307 Y44.51422
G01 X-13.90770 Y44.67030
G01 X-13.89238 Y44.74719
G01 X-13.84687 Y44.89727
G01 X-13.81687 Y44.96972
G01 X-13.74293 Y45.10802
G01 X-13.69937 Y45.17322
G01 X-13.62500 Y45.26385
G01 X-13.62500 Y47.24218
G01 X-13.69937 Y47.33280
G01 X-13.74293 Y47.39801
G01 X-13.81687 Y47.53631
G01 X-13.84687 Y47.60875
G01 X-13.89238 Y47.75884
G01 X-13.90770 Y47.83572
G01 X-13.92307 Y47.99181
G01 X-13.92307 Y48.07022
G01 X-13.90770 Y48.22630
G01 X-13.89238 Y48.30319
G01 X-13.84687 Y48.45327
G01 X-13.81687 Y48.52572
G01 X-13.74293 Y48.66402
G01 X-13.69937 Y48.72922
G01 X-13.59988 Y48.85045
G01 X-13.54443 Y48.90590
G01 X-13.42320 Y49.00539
G01 X-13.35799 Y49.04896
G01 X-13.21969 Y49.12290
G01 X-13.14725 Y49.15289
G01 X-12.99716 Y49.19841
G01 X-12.92028 Y49.21373
G01 X-12.76419 Y49.22909
G01 X-12.68578 Y49.22909
G01 X-12.52970 Y49.21373
G01 X-12.45281 Y49.19841
G01 X-12.30273 Y49.15289
G01 X-12.23028 Y49.12290
G01 X-12.09198 Y49.04896
G01 X-12.02678 Y49.00539
G01 X-11.90555 Y48.90590
G01 X-11.85010 Y48.85045
G01 X-11.75061 Y48.72922
G01 X-11.70704 Y48.66402
G01 X-11.63310 Y48.52572
G01 X-11.60311 Y48.45327
G01 X-11.55759 Y48.30319
G01 X-11.54227 Y48.22630
G01 X-11.52691 Y48.07022
G01 X-11.52691 Y47.99181
G01 X-11.54227 Y47.83572
G01 X-11.55759 Y47.75884
G01 X-11.60311 Y47.60875
G01 X-11.63310 Y47.53631
G01 X-11.70704 Y47.39801
G01 X-11.75061 Y47.33280
G01 X-11.82498 Y47.24218
G01 X-11.82498 Y45.26385
G01 X-11.75061 Y45.17322
G01 X-11.70704 Y45.10802
G01 X-11.63310 Y44.96972
G01 X-11.60311 Y44.89727
G01 X-11.55759 Y44.74719
G01 X-11.54227 Y44.67030
G01 X-11.52691 Y44.51422
G01 X-11.52691 Y44.43581
G01 X-11.54227 Y44.27972
G01 X-11.55759 Y44.20284
G01 X-11.60311 Y44.05275
G01 X-11.63310 Y43.98031
G01 X-11.70704 Y43.84201
G01 X-11.75061 Y43.77680
G01 X-11.82498 Y43.68618
G01 X-11.82498 Y40.52980
G01 X-11.59020 Y40.29502
G01 X-11.05002 Y40.29502
G01 X-11.03979 Y40.30526
G01 X-10.91098 Y40.41097
G01 X-10.84578 Y40.45454
G01 X-10.69882 Y40.53307
G01 X-10.62638 Y40.56310
G01 X-10.46694 Y40.61146
G01 X-10.39003 Y40.62675
G01 X-10.22419 Y40.64308
G01 X-10.14578 Y40.64308
G01 X-9.97995 Y40.62675
G01 X-9.90303 Y40.61146
G01 X-9.74360 Y40.56310
G01 X-9.67116 Y40.53307
G01 X-9.52419 Y40.45454
G01 X-9.45899 Y40.41097
G01 X-9.33019 Y40.30526
G01 X-9.31995 Y40.29502
G01 X-7.89077 Y40.29502
G01 X-7.67436 Y40.51141
G01 X-7.64528 Y40.53777
G01 X-7.56951 Y40.59995
G01 X-7.50431 Y40.64354
G01 X-7.41787 Y40.68974
G01 X-7.34543 Y40.71974
G01 X-7.25163 Y40.74818
G01 X-7.17472 Y40.76348
G01 X-7.07718 Y40.77310
G01 X-7.03799 Y40.77503
G01 X-5.25560 Y40.77503
G01 X-5.24196 Y40.79545
G01 X-5.09273 Y40.97729
G01 X-5.03728 Y41.03274
G01 X-4.85542 Y41.18199
G01 X-4.79022 Y41.22555
G01 X-4.58278 Y41.33645
G01 X-4.51031 Y41.36645
G01 X-4.28522 Y41.43472
G01 X-4.20830 Y41.45004
G01 X-3.97419 Y41.47308
G01 X-3.89578 Y41.47308
G01 X-3.66167 Y41.45004
G01 X-3.58476 Y41.43472
G01 X-3.35966 Y41.36645
G01 X-3.28720 Y41.33645
G01 X-3.18895 Y41.28392
G01 X-3.07976 Y41.22555
G01 X-3.01455 Y41.18199
G01 X-2.83269 Y41.03274
G01 X-2.77724 Y40.97729
G01 X-2.62802 Y40.79545
G01 X-2.58446 Y40.73025
G01 X-2.47356 Y40.52279
G01 X-2.44356 Y40.45034
G01 X-2.37526 Y40.22522
G01 X-2.35997 Y40.14834
G01 X-2.33691 Y39.91423
G01 X-2.33691 Y39.83582
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-2.33498 Y42.17500 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.33498 Y42.17500
G01 X-2.34267 Y42.09698
G01 X-2.36292 Y42.03028
G01 X-2.36655 Y42.01984
G01 X-2.39670 Y41.96347
G01 X-2.40668 Y41.94757
G01 X-2.44562 Y41.90013
G01 X-2.46010 Y41.88565
G01 X-2.50620 Y41.84780
G01 X-2.52898 Y41.83376
G01 X-2.58192 Y41.80546
G01 X-2.65695 Y41.78270
G01 X-2.73498 Y41.77501
G01 X-5.13500 Y41.77501
G01 X-5.21303 Y41.78270
G01 X-5.28806 Y41.80546
G01 X-5.35722 Y41.84242
G01 X-5.41783 Y41.89218
G01 X-5.46759 Y41.95278
G01 X-5.50454 Y42.02194
G01 X-5.52730 Y42.09698
G01 X-5.53500 Y42.17500
G01 X-5.53500 Y42.47500
G01 X-6.72120 Y42.47500
G01 X-7.89760 Y41.29863
G01 X-7.92669 Y41.27226
G01 X-8.00245 Y41.21008
G01 X-8.06766 Y41.16650
G01 X-8.15409 Y41.12029
G01 X-8.22653 Y41.09030
G01 X-8.32034 Y41.06185
G01 X-8.39725 Y41.04656
G01 X-8.49478 Y41.03693
G01 X-8.53400 Y41.03500
G01 X-9.31995 Y41.03500
G01 X-9.33019 Y41.02477
G01 X-9.45899 Y40.91905
G01 X-9.52419 Y40.87549
G01 X-9.67116 Y40.79695
G01 X-9.74360 Y40.76693
G01 X-9.90303 Y40.71857
G01 X-9.97995 Y40.70328
G01 X-10.14578 Y40.68695
G01 X-10.22419 Y40.68695
G01 X-10.39003 Y40.70328
G01 X-10.46694 Y40.71857
G01 X-10.62638 Y40.76693
G01 X-10.69882 Y40.79695
G01 X-10.84578 Y40.87549
G01 X-10.91098 Y40.91905
G01 X-11.03979 Y41.02477
G01 X-11.09523 Y41.08021
G01 X-11.20095 Y41.20902
G01 X-11.24451 Y41.27422
G01 X-11.32305 Y41.42118
G01 X-11.35307 Y41.49362
G01 X-11.40143 Y41.65306
G01 X-11.41672 Y41.72997
G01 X-11.42543 Y41.81831
G01 X-11.43305 Y41.89581
G01 X-11.43305 Y41.97422
G01 X-11.41672 Y42.14005
G01 X-11.40143 Y42.21697
G01 X-11.35307 Y42.37640
G01 X-11.32305 Y42.44884
G01 X-11.24451 Y42.59581
G01 X-11.20095 Y42.66101
G01 X-11.09523 Y42.78981
G01 X-11.08500 Y42.80005
G01 X-11.08500 Y58.43225
G01 X-12.44357 Y59.79082
G01 X-12.56026 Y59.80230
G01 X-12.63717 Y59.81762
G01 X-12.78726 Y59.86313
G01 X-12.85970 Y59.89313
G01 X-12.99800 Y59.96707
G01 X-13.06320 Y60.01063
G01 X-13.18444 Y60.11012
G01 X-13.23988 Y60.16557
G01 X-13.33938 Y60.28680
G01 X-13.38294 Y60.35201
G01 X-13.45685 Y60.49031
G01 X-13.48687 Y60.56275
G01 X-13.53239 Y60.71284
G01 X-13.54768 Y60.78972
G01 X-13.56307 Y60.94581
G01 X-13.56307 Y61.02422
G01 X-13.54768 Y61.18030
G01 X-13.53239 Y61.25719
G01 X-13.48687 Y61.40727
G01 X-13.45685 Y61.47972
G01 X-13.38294 Y61.61802
G01 X-13.33938 Y61.68322
G01 X-13.26498 Y61.77387
G01 X-13.26498 Y64.00615
G01 X-13.33938 Y64.09680
G01 X-13.38294 Y64.16201
G01 X-13.45685 Y64.30031
G01 X-13.48687 Y64.37275
G01 X-13.53239 Y64.52284
G01 X-13.54768 Y64.59972
G01 X-13.56307 Y64.75581
G01 X-13.56307 Y64.83422
G01 X-13.54768 Y64.99030
G01 X-13.53239 Y65.06719
G01 X-13.48687 Y65.21727
G01 X-13.45685 Y65.28972
G01 X-13.38294 Y65.42802
G01 X-13.33938 Y65.49322
G01 X-13.23988 Y65.61445
G01 X-13.18444 Y65.66990
G01 X-13.06320 Y65.76939
G01 X-12.99800 Y65.81296
G01 X-12.85970 Y65.88690
G01 X-12.78726 Y65.91689
G01 X-12.63717 Y65.96241
G01 X-12.56026 Y65.97773
G01 X-12.40420 Y65.99309
G01 X-12.32579 Y65.99309
G01 X-12.16971 Y65.97773
G01 X-12.09279 Y65.96241
G01 X-11.94273 Y65.91689
G01 X-11.87029 Y65.88690
G01 X-11.73196 Y65.81296
G01 X-11.66679 Y65.76939
G01 X-11.54555 Y65.66990
G01 X-11.49010 Y65.61445
G01 X-11.39061 Y65.49322
G01 X-11.34705 Y65.42802
G01 X-11.27311 Y65.28972
G01 X-11.24311 Y65.21727
G01 X-11.19757 Y65.06719
G01 X-11.18228 Y64.99030
G01 X-11.16691 Y64.83422
G01 X-11.16691 Y64.75581
G01 X-11.18228 Y64.59972
G01 X-11.19757 Y64.52284
G01 X-11.24311 Y64.37275
G01 X-11.27311 Y64.30031
G01 X-11.34705 Y64.16201
G01 X-11.39061 Y64.09680
G01 X-11.46496 Y64.00620
G01 X-11.46496 Y61.77382
G01 X-11.39061 Y61.68322
G01 X-11.34705 Y61.61802
G01 X-11.27311 Y61.47972
G01 X-11.24311 Y61.40727
G01 X-11.19757 Y61.25719
G01 X-11.18228 Y61.18030
G01 X-11.17080 Y61.06364
G01 X-9.54860 Y59.44142
G01 X-9.52224 Y59.41233
G01 X-9.46006 Y59.33657
G01 X-9.41647 Y59.27136
G01 X-9.37027 Y59.18493
G01 X-9.34027 Y59.11249
G01 X-9.31182 Y59.01868
G01 X-9.29653 Y58.94177
G01 X-9.28691 Y58.84424
G01 X-9.28498 Y58.80502
G01 X-9.28498 Y42.83502
G01 X-8.90677 Y42.83502
G01 X-7.73037 Y44.01140
G01 X-7.70129 Y44.03776
G01 X-7.62552 Y44.09994
G01 X-7.56032 Y44.14353
G01 X-7.47388 Y44.18973
G01 X-7.40144 Y44.21973
G01 X-7.30764 Y44.24818
G01 X-7.23073 Y44.26347
G01 X-7.13319 Y44.27310
G01 X-7.09400 Y44.27503
G01 X-5.53500 Y44.27503
G01 X-5.53500 Y44.57503
G01 X-5.52730 Y44.65305
G01 X-5.50574 Y44.72415
G01 X-5.50388 Y44.72933
G01 X-5.47333 Y44.78648
G01 X-5.46327 Y44.80248
G01 X-5.42433 Y44.84993
G01 X-5.40990 Y44.86436
G01 X-5.36240 Y44.90335
G01 X-5.34658 Y44.91330
G01 X-5.29014 Y44.94345
G01 X-5.27978 Y44.94708
G01 X-5.21303 Y44.96733
G01 X-5.13500 Y44.97502
G01 X-2.73498 Y44.97502
G01 X-2.65695 Y44.96733
G01 X-2.59012 Y44.94706
G01 X-2.57983 Y44.94345
G01 X-2.52322 Y44.91320
G01 X-2.50765 Y44.90342
G01 X-2.45992 Y44.86423
G01 X-2.44575 Y44.85008
G01 X-2.40661 Y44.80236
G01 X-2.39680 Y44.78676
G01 X-2.36652 Y44.73014
G01 X-2.36297 Y44.71998
G01 X-2.34267 Y44.65305
G01 X-2.33498 Y44.57503
G01 X-2.33498 Y42.17500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-3.23950 Y72.90961 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.23950 Y72.90961
G01 X-3.27094 Y72.63052
G01 X-3.33343 Y72.35671
G01 X-3.42619 Y72.09163
G01 X-3.54803 Y71.83857
G01 X-3.69743 Y71.60080
G01 X-3.87254 Y71.38122
G01 X-4.07117 Y71.18259
G01 X-4.29073 Y71.00751
G01 X-4.52852 Y70.85808
G01 X-4.78156 Y70.73624
G01 X-5.04666 Y70.64348
G01 X-5.32044 Y70.58099
G01 X-5.59956 Y70.54955
G01 X-5.88039 Y70.54955
G01 X-6.15951 Y70.58099
G01 X-6.43329 Y70.64348
G01 X-6.69839 Y70.73624
G01 X-6.95143 Y70.85808
G01 X-7.18922 Y71.00751
G01 X-7.40878 Y71.18259
G01 X-7.60741 Y71.38122
G01 X-7.78249 Y71.60078
G01 X-7.93192 Y71.83857
G01 X-8.05376 Y72.09163
G01 X-8.11566 Y72.26847
G01 X-8.14652 Y72.35668
G01 X-8.20901 Y72.63049
G01 X-8.24045 Y72.90961
G01 X-8.24045 Y73.19044
G01 X-8.20901 Y73.46956
G01 X-8.14652 Y73.74334
G01 X-8.05376 Y74.00844
G01 X-7.93192 Y74.26148
G01 X-7.78249 Y74.49927
G01 X-7.60741 Y74.71883
G01 X-7.40878 Y74.91746
G01 X-7.18920 Y75.09257
G01 X-6.95143 Y75.24197
G01 X-6.69837 Y75.36381
G01 X-6.43329 Y75.45657
G01 X-6.15946 Y75.51908
G01 X-5.91323 Y75.54682
G01 X-5.88044 Y75.55050
G01 X-5.59946 Y75.55050
G01 X-5.57472 Y75.54773
G01 X-5.32047 Y75.51908
G01 X-5.04666 Y75.45657
G01 X-4.78156 Y75.36381
G01 X-4.52852 Y75.24197
G01 X-4.29073 Y75.09257
G01 X-4.07117 Y74.91746
G01 X-3.87254 Y74.71883
G01 X-3.69743 Y74.49927
G01 X-3.54803 Y74.26148
G01 X-3.42619 Y74.00844
G01 X-3.33343 Y73.74334
G01 X-3.27094 Y73.46956
G01 X-3.23950 Y73.19044
G01 X-3.23950 Y72.90961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-15.88849 Y71.96311 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.88849 Y71.96311
G01 X-15.89195 Y71.94119
G01 X-15.91064 Y71.82318
G01 X-15.93414 Y71.75087
G01 X-15.94882 Y71.68978
G01 X-15.95794 Y71.63220
G01 X-15.95687 Y71.63202
G01 X-15.96073 Y71.61355
G01 X-15.97120 Y71.51894
G01 X-16.00086 Y71.43415
G01 X-16.04887 Y71.35772
G01 X-16.11267 Y71.29392
G01 X-16.18910 Y71.24591
G01 X-16.27432 Y71.21609
G01 X-16.35324 Y71.20718
G01 X-16.35547 Y71.20703
G01 X-16.38923 Y71.20296
G01 X-16.44679 Y71.19354
G01 X-16.50582 Y71.17919
G01 X-16.57810 Y71.15569
G01 X-16.71808 Y71.13354
G01 X-18.07721 Y71.13354
G01 X-18.16624 Y71.12349
G01 X-18.25257 Y71.10378
G01 X-18.33710 Y71.07421
G01 X-18.41292 Y71.02656
G01 X-18.48216 Y70.97134
G01 X-18.54551 Y70.90799
G01 X-18.59316 Y70.83215
G01 X-18.63159 Y70.75234
G01 X-18.66118 Y70.66781
G01 X-18.67122 Y70.57878
G01 X-18.67122 Y70.49024
G01 X-18.66118 Y70.40124
G01 X-18.63159 Y70.31671
G01 X-18.59316 Y70.23690
G01 X-18.53111 Y70.14399
G01 X-18.51625 Y70.12735
G01 X-18.50076 Y70.11097
G01 X-18.49639 Y70.10660
G01 X-18.42613 Y70.01506
G01 X-18.40828 Y69.99176
G01 X-18.40378 Y69.98592
G01 X-18.36469 Y69.93494
G01 X-18.25651 Y69.74757
G01 X-18.17371 Y69.54767
G01 X-18.11770 Y69.33873
G01 X-18.08948 Y69.12423
G01 X-18.08948 Y18.30185
G01 X-18.11772 Y18.08735
G01 X-18.17371 Y17.87833
G01 X-18.21884 Y17.76934
G01 X-18.25649 Y17.67848
G01 X-18.36469 Y17.49108
G01 X-18.39283 Y17.45438
G01 X-18.49641 Y17.31943
G01 X-18.66756 Y17.14826
G01 X-18.67292 Y17.14292
G01 X-21.61896 Y14.19688
G01 X-21.79437 Y14.02144
G01 X-21.96600 Y13.88977
G01 X-22.15343 Y13.78156
G01 X-22.35323 Y13.69879
G01 X-22.35650 Y13.69790
G01 X-22.43933 Y13.66533
G01 X-22.51764 Y13.62396
G01 X-22.59168 Y13.57349
G01 X-22.65264 Y13.50775
G01 X-22.70522 Y13.43648
G01 X-22.74997 Y13.35893
G01 X-22.77200 Y13.28751
G01 X-22.77636 Y13.27336
G01 X-22.79282 Y13.18634
G01 X-22.79953 Y13.09706
G01 X-22.78617 Y13.00854
G01 X-22.76326 Y12.92299
G01 X-22.73054 Y12.83955
G01 X-22.68005 Y12.76551
G01 X-22.62229 Y12.69841
G01 X-22.57286 Y12.65015
G01 X-22.51589 Y12.61108
G01 X-22.47385 Y12.58733
G01 X-22.43016 Y12.56605
G01 X-22.33827 Y12.52797
G01 X-22.17715 Y12.42927
G01 X-22.03347 Y12.30653
G01 X-21.91073 Y12.16285
G01 X-21.81203 Y12.00173
G01 X-21.73969 Y11.82714
G01 X-21.69559 Y11.64342
G01 X-21.68076 Y11.45503
G01 X-21.69559 Y11.26663
G01 X-21.73969 Y11.08292
G01 X-21.81205 Y10.90824
G01 X-21.91073 Y10.74720
G01 X-22.03347 Y10.60352
G01 X-22.17715 Y10.48078
G01 X-22.33827 Y10.38208
G01 X-22.51286 Y10.30974
G01 X-22.69658 Y10.26564
G01 X-22.88497 Y10.25081
G01 X-23.07337 Y10.26564
G01 X-23.25708 Y10.30974
G01 X-23.43168 Y10.38208
G01 X-23.56910 Y10.46625
G01 X-23.65015 Y10.50418
G01 X-23.73405 Y10.53250
G01 X-23.84174 Y10.55300
G01 X-23.86181 Y10.55401
G01 X-23.88205 Y10.55454
G01 X-25.69322 Y10.55454
G01 X-25.78225 Y10.54449
G01 X-25.86859 Y10.52478
G01 X-25.95312 Y10.49521
G01 X-26.02894 Y10.44756
G01 X-26.09818 Y10.39234
G01 X-26.16152 Y10.32899
G01 X-26.20917 Y10.25315
G01 X-26.24760 Y10.17334
G01 X-26.27720 Y10.08881
G01 X-26.28723 Y9.99978
G01 X-26.28723 Y9.91124
G01 X-26.28024 Y9.83689
G01 X-26.25957 Y9.76514
G01 X-26.23790 Y9.70992
G01 X-26.21194 Y9.65602
G01 X-26.20651 Y9.64660
G01 X-26.12373 Y9.44670
G01 X-26.06772 Y9.23771
G01 X-26.03948 Y9.02320
G01 X-26.03948 Y7.36651
G01 X-26.02944 Y7.27761
G01 X-26.00976 Y7.19128
G01 X-25.98019 Y7.10667
G01 X-25.93252 Y7.03080
G01 X-25.87730 Y6.96156
G01 X-25.81395 Y6.89821
G01 X-25.73811 Y6.85056
G01 X-25.65830 Y6.81213
G01 X-25.59556 Y6.78818
G01 X-25.52967 Y6.77505
G01 X-25.48540 Y6.77005
G01 X-25.44049 Y6.76751
G01 X-22.43306 Y6.76751
G01 X-22.40314 Y6.76278
G01 X-22.29313 Y6.74536
G01 X-22.22082 Y6.72186
G01 X-22.15973 Y6.70718
G01 X-22.10215 Y6.69806
G01 X-22.10197 Y6.69913
G01 X-22.08350 Y6.69527
G01 X-21.98889 Y6.68480
G01 X-21.90410 Y6.65514
G01 X-21.82767 Y6.60713
G01 X-21.76387 Y6.54333
G01 X-21.71586 Y6.46690
G01 X-21.68604 Y6.38168
G01 X-21.67713 Y6.30276
G01 X-21.67698 Y6.30053
G01 X-21.67291 Y6.26677
G01 X-21.66349 Y6.20921
G01 X-21.64914 Y6.15018
G01 X-21.62564 Y6.07790
G01 X-21.60349 Y5.93792
G01 X-21.60349 Y5.79613
G01 X-21.62564 Y5.65615
G01 X-21.64914 Y5.58387
G01 X-21.66382 Y5.52278
G01 X-21.67294 Y5.46522
G01 X-21.67187 Y5.46502
G01 X-21.67573 Y5.44655
G01 X-21.68620 Y5.35194
G01 X-21.71586 Y5.26718
G01 X-21.76387 Y5.19072
G01 X-21.82767 Y5.12695
G01 X-21.90410 Y5.07891
G01 X-21.98932 Y5.04909
G01 X-22.06824 Y5.04018
G01 X-22.07047 Y5.04003
G01 X-22.10423 Y5.03596
G01 X-22.16179 Y5.02656
G01 X-22.22082 Y5.01219
G01 X-22.29310 Y4.98869
G01 X-22.43308 Y4.96654
G01 X-26.02922 Y4.96654
G01 X-26.11824 Y4.95651
G01 X-26.20458 Y4.93680
G01 X-26.27892 Y4.91196
G01 X-26.34699 Y4.87307
G01 X-26.40138 Y4.83449
G01 X-26.45276 Y4.79108
G01 X-28.01745 Y3.22639
G01 X-28.10803 Y3.15692
G01 X-28.18905 Y3.09474
G01 X-28.37643 Y2.98656
G01 X-28.57633 Y2.90376
G01 X-28.78527 Y2.84775
G01 X-28.99982 Y2.81953
G01 X-30.48331 Y2.81953
G01 X-30.57234 Y2.80947
G01 X-30.65867 Y2.78976
G01 X-30.76311 Y2.74991
G01 X-30.78265 Y2.73912
G01 X-30.80198 Y2.72771
G01 X-30.83507 Y2.70691
G01 X-30.92026 Y2.67709
G01 X-30.98747 Y2.66955
G01 X-33.83248 Y2.66955
G01 X-33.89968 Y2.67709
G01 X-33.98485 Y2.70691
G01 X-34.01807 Y2.72779
G01 X-34.09864 Y2.76655
G01 X-34.18223 Y2.79581
G01 X-34.29206 Y2.81768
G01 X-34.31434 Y2.81890
G01 X-34.33667 Y2.81953
G01 X-36.32617 Y2.81953
G01 X-36.54068 Y2.84775
G01 X-36.74964 Y2.90376
G01 X-36.94954 Y2.98656
G01 X-37.03440 Y3.03556
G01 X-37.13689 Y3.09472
G01 X-37.30857 Y3.22649
G01 X-39.51618 Y5.43408
G01 X-39.58626 Y5.48996
G01 X-39.66127 Y5.53708
G01 X-39.73137 Y5.57208
G01 X-39.80696 Y5.59273
G01 X-39.87267 Y5.60388
G01 X-39.93975 Y5.60955
G01 X-40.28049 Y5.60955
G01 X-40.34768 Y5.61711
G01 X-40.43284 Y5.64688
G01 X-40.50927 Y5.69494
G01 X-40.57308 Y5.75872
G01 X-40.62108 Y5.83515
G01 X-40.65090 Y5.92037
G01 X-40.65847 Y5.98755
G01 X-40.65847 Y8.03250
G01 X-40.65090 Y8.09969
G01 X-40.62108 Y8.18490
G01 X-40.57308 Y8.26133
G01 X-40.50927 Y8.32511
G01 X-40.43284 Y8.37317
G01 X-40.34768 Y8.40296
G01 X-40.28049 Y8.41051
G01 X-39.79375 Y8.41051
G01 X-39.70470 Y8.42056
G01 X-39.61837 Y8.44027
G01 X-39.52037 Y8.47665
G01 X-39.50722 Y8.48361
G01 X-39.49424 Y8.49079
G01 X-39.48954 Y8.49349
G01 X-39.28964 Y8.57629
G01 X-39.08067 Y8.63230
G01 X-38.86617 Y8.66052
G01 X-38.64979 Y8.66052
G01 X-38.43529 Y8.63230
G01 X-38.22632 Y8.57629
G01 X-38.02642 Y8.49349
G01 X-38.02172 Y8.49079
G01 X-37.93963 Y8.45496
G01 X-37.85500 Y8.42884
G01 X-37.75210 Y8.41137
G01 X-37.73724 Y8.41081
G01 X-37.72223 Y8.41051
G01 X-37.23547 Y8.41051
G01 X-37.16826 Y8.40296
G01 X-37.08312 Y8.37317
G01 X-37.00666 Y8.32511
G01 X-36.94288 Y8.26133
G01 X-36.89485 Y8.18490
G01 X-36.86506 Y8.09971
G01 X-36.85749 Y8.03250
G01 X-36.85749 Y7.69179
G01 X-36.84743 Y7.60276
G01 X-36.82772 Y7.51643
G01 X-36.80288 Y7.44208
G01 X-36.76399 Y7.37401
G01 X-36.72541 Y7.31963
G01 X-36.68203 Y7.26824
G01 X-35.70976 Y6.29598
G01 X-35.63979 Y6.24015
G01 X-35.56478 Y6.19301
G01 X-35.49455 Y6.15798
G01 X-35.41883 Y6.13731
G01 X-35.35312 Y6.12616
G01 X-35.28622 Y6.12052
G01 X-34.33667 Y6.12052
G01 X-34.24761 Y6.13058
G01 X-34.16128 Y6.15029
G01 X-34.05683 Y6.19014
G01 X-34.03730 Y6.20093
G01 X-34.01805 Y6.21231
G01 X-33.98485 Y6.23314
G01 X-33.89968 Y6.26296
G01 X-33.83248 Y6.27050
G01 X-30.98747 Y6.27050
G01 X-30.92026 Y6.26296
G01 X-30.83507 Y6.23314
G01 X-30.80198 Y6.21234
G01 X-30.72131 Y6.17350
G01 X-30.63772 Y6.14424
G01 X-30.52789 Y6.12240
G01 X-30.50561 Y6.12115
G01 X-30.48331 Y6.12052
G01 X-30.03975 Y6.12052
G01 X-29.95070 Y6.13058
G01 X-29.86436 Y6.15029
G01 X-29.78999 Y6.17515
G01 X-29.72187 Y6.21407
G01 X-29.66751 Y6.25265
G01 X-29.61623 Y6.29596
G01 X-29.51595 Y6.39621
G01 X-29.46004 Y6.46631
G01 X-29.41293 Y6.54132
G01 X-29.37795 Y6.61142
G01 X-29.35730 Y6.68701
G01 X-29.34612 Y6.75272
G01 X-29.34046 Y6.81978
G01 X-29.34046 Y9.02331
G01 X-29.31224 Y9.23771
G01 X-29.25623 Y9.44667
G01 X-29.17343 Y9.64660
G01 X-29.07071 Y9.82455
G01 X-29.06528 Y9.83395
G01 X-28.93355 Y10.00563
G01 X-28.78232 Y10.15686
G01 X-28.72649 Y10.22688
G01 X-28.67938 Y10.30187
G01 X-28.64051 Y10.38254
G01 X-28.62057 Y10.46984
G01 X-28.61064 Y10.55785
G01 X-28.61052 Y10.64637
G01 X-28.62987 Y10.73278
G01 X-28.65796 Y10.81446
G01 X-28.69510 Y10.89330
G01 X-28.71824 Y10.93107
G01 X-28.78755 Y11.09841
G01 X-28.82982 Y11.27451
G01 X-28.84404 Y11.45503
G01 X-28.82982 Y11.63559
G01 X-28.81481 Y11.69818
G01 X-28.78755 Y11.81159
G01 X-28.71826 Y11.97895
G01 X-28.69515 Y12.01664
G01 X-28.65715 Y12.09787
G01 X-28.62885 Y12.18180
G01 X-28.60993 Y12.26930
G01 X-28.61092 Y12.35881
G01 X-28.62182 Y12.44669
G01 X-28.64237 Y12.53280
G01 X-28.68133 Y12.61225
G01 X-28.72771 Y12.68512
G01 X-28.78232 Y12.75319
G01 X-28.93355 Y12.90443
G01 X-29.06525 Y13.07608
G01 X-29.17343 Y13.26348
G01 X-29.25623 Y13.46338
G01 X-29.31224 Y13.67232
G01 X-29.34046 Y13.88682
G01 X-29.34046 Y14.10320
G01 X-29.31826 Y14.27186
G01 X-29.31224 Y14.31776
G01 X-29.25623 Y14.52667
G01 X-29.17343 Y14.72657
G01 X-29.06525 Y14.91397
G01 X-28.93353 Y15.08563
G01 X-27.68636 Y16.33279
G01 X-27.68174 Y16.33744
G01 X-27.51057 Y16.50861
G01 X-27.35344 Y16.62916
G01 X-27.33889 Y16.64033
G01 X-27.15151 Y16.74849
G01 X-26.95167 Y16.83129
G01 X-26.74265 Y16.88730
G01 X-26.52817 Y16.91552
G01 X-23.81675 Y16.91552
G01 X-23.72770 Y16.92558
G01 X-23.64136 Y16.94529
G01 X-23.56699 Y16.97015
G01 X-23.49887 Y17.00907
G01 X-23.44451 Y17.04765
G01 X-23.39320 Y17.09098
G01 X-21.56593 Y18.91823
G01 X-21.51005 Y18.98831
G01 X-21.46293 Y19.06332
G01 X-21.42795 Y19.13342
G01 X-21.40730 Y19.20901
G01 X-21.39613 Y19.27472
G01 X-21.39046 Y19.34178
G01 X-21.39046 Y21.13601
G01 X-21.40052 Y21.22506
G01 X-21.42023 Y21.31139
G01 X-21.44980 Y21.39592
G01 X-21.49745 Y21.47174
G01 X-21.55267 Y21.54098
G01 X-21.61599 Y21.60431
G01 X-21.69181 Y21.65196
G01 X-21.74223 Y21.67624
G01 X-21.77159 Y21.69039
G01 X-21.85615 Y21.72000
G01 X-21.94520 Y21.73004
G01 X-22.03377 Y21.73004
G01 X-22.12280 Y21.72000
G01 X-22.20735 Y21.69039
G01 X-22.28713 Y21.65196
G01 X-22.37977 Y21.59013
G01 X-22.39643 Y21.57527
G01 X-22.41309 Y21.55953
G01 X-22.46270 Y21.50992
G01 X-22.53910 Y21.46191
G01 X-22.62432 Y21.43209
G01 X-22.70324 Y21.42318
G01 X-22.70547 Y21.42303
G01 X-22.73923 Y21.41896
G01 X-22.79679 Y21.40954
G01 X-22.85582 Y21.39519
G01 X-22.92810 Y21.37169
G01 X-23.06808 Y21.34954
G01 X-26.02922 Y21.34954
G01 X-26.11824 Y21.33949
G01 X-26.20458 Y21.31978
G01 X-26.27892 Y21.29493
G01 X-26.34699 Y21.25605
G01 X-26.40138 Y21.21746
G01 X-26.45276 Y21.17408
G01 X-27.71885 Y19.90799
G01 X-27.89037 Y19.73644
G01 X-28.02098 Y19.63624
G01 X-28.06205 Y19.60472
G01 X-28.24943 Y19.49656
G01 X-28.44933 Y19.41376
G01 X-28.65827 Y19.35775
G01 X-28.87282 Y19.32953
G01 X-30.48331 Y19.32953
G01 X-30.57234 Y19.31947
G01 X-30.65867 Y19.29976
G01 X-30.76311 Y19.25991
G01 X-30.78265 Y19.24912
G01 X-30.80193 Y19.23774
G01 X-30.86921 Y19.19547
G01 X-30.93929 Y19.13959
G01 X-31.00193 Y19.07696
G01 X-31.05778 Y19.00690
G01 X-31.09667 Y18.92616
G01 X-31.12504 Y18.84505
G01 X-31.12590 Y18.84256
G01 X-31.14582 Y18.75529
G01 X-31.14582 Y18.66578
G01 X-31.13591 Y18.57779
G01 X-31.11811 Y18.49669
G01 X-31.08394 Y18.42103
G01 X-31.04574 Y18.35552
G01 X-31.00083 Y18.29316
G01 X-30.97884 Y18.26809
G01 X-30.84780 Y18.07198
G01 X-30.77287 Y17.92004
G01 X-30.77752 Y17.92004
G01 X-30.89316 Y18.13637
G01 X-30.93672 Y18.20157
G01 X-31.11084 Y18.41371
G01 X-31.16629 Y18.46916
G01 X-31.37843 Y18.64328
G01 X-31.44363 Y18.68684
G01 X-31.68567 Y18.81622
G01 X-31.75811 Y18.84622
G01 X-32.02075 Y18.92588
G01 X-32.09766 Y18.94119
G01 X-32.37078 Y18.96809
G01 X-32.44919 Y18.96809
G01 X-32.72232 Y18.94119
G01 X-32.79923 Y18.92588
G01 X-33.06187 Y18.84622
G01 X-33.13431 Y18.81622
G01 X-33.17987 Y18.79184
G01 X-33.37634 Y18.68684
G01 X-33.44154 Y18.64328
G01 X-33.65369 Y18.46916
G01 X-33.70913 Y18.41371
G01 X-33.88325 Y18.20157
G01 X-33.92681 Y18.13637
G01 X-34.04246 Y17.92004
G01 X-34.04708 Y17.92004
G01 X-33.97215 Y18.07198
G01 X-33.84111 Y18.26809
G01 X-33.81912 Y18.29316
G01 X-33.76783 Y18.36685
G01 X-33.72572 Y18.44478
G01 X-33.69222 Y18.52788
G01 X-33.67804 Y18.61638
G01 X-33.67393 Y18.70485
G01 X-33.67982 Y18.79415
G01 X-33.70540 Y18.87993
G01 X-33.74005 Y18.96141
G01 X-33.78028 Y19.03403
G01 X-33.83464 Y19.09679
G01 X-33.88996 Y19.14863
G01 X-33.95076 Y19.19550
G01 X-34.01807 Y19.23776
G01 X-34.09864 Y19.27655
G01 X-34.18223 Y19.30581
G01 X-34.29206 Y19.32765
G01 X-34.31434 Y19.32890
G01 X-34.33667 Y19.32953
G01 X-36.32818 Y19.32953
G01 X-36.54268 Y19.35775
G01 X-36.75162 Y19.41376
G01 X-36.95155 Y19.49656
G01 X-37.03978 Y19.54749
G01 X-37.13892 Y19.60474
G01 X-37.18271 Y19.63832
G01 X-37.31057 Y19.73644
G01 X-37.48185 Y19.90771
G01 X-37.48850 Y19.91439
G01 X-39.51819 Y21.94408
G01 X-39.58822 Y21.99991
G01 X-39.66320 Y22.04703
G01 X-39.73333 Y22.08206
G01 X-39.80897 Y22.10271
G01 X-39.87470 Y22.11388
G01 X-39.94176 Y22.11955
G01 X-40.28248 Y22.11955
G01 X-40.34968 Y22.12709
G01 X-40.43483 Y22.15688
G01 X-40.51128 Y22.20494
G01 X-40.57508 Y22.26872
G01 X-40.62309 Y22.34515
G01 X-40.65291 Y22.43031
G01 X-40.66045 Y22.49752
G01 X-40.66045 Y24.54253
G01 X-40.65291 Y24.60974
G01 X-40.62312 Y24.69488
G01 X-40.57506 Y24.77133
G01 X-40.51128 Y24.83511
G01 X-40.43483 Y24.88317
G01 X-40.34968 Y24.91296
G01 X-40.28248 Y24.92051
G01 X-39.79576 Y24.92051
G01 X-39.70673 Y24.93054
G01 X-39.62037 Y24.95025
G01 X-39.52236 Y24.98665
G01 X-39.50920 Y24.99361
G01 X-39.49622 Y25.00079
G01 X-39.49152 Y25.00349
G01 X-39.29162 Y25.08629
G01 X-39.08268 Y25.14230
G01 X-38.86818 Y25.17052
G01 X-38.65177 Y25.17052
G01 X-38.43727 Y25.14230
G01 X-38.22830 Y25.08629
G01 X-38.02848 Y25.00354
G01 X-38.02386 Y25.00087
G01 X-37.94164 Y24.96496
G01 X-37.85700 Y24.93884
G01 X-37.75408 Y24.92137
G01 X-37.73920 Y24.92081
G01 X-37.72421 Y24.92051
G01 X-37.23747 Y24.92051
G01 X-37.17026 Y24.91296
G01 X-37.08512 Y24.88317
G01 X-37.00867 Y24.83511
G01 X-36.94489 Y24.77133
G01 X-36.89683 Y24.69488
G01 X-36.86704 Y24.60974
G01 X-36.85950 Y24.54253
G01 X-36.85950 Y24.20179
G01 X-36.84944 Y24.11276
G01 X-36.82973 Y24.02643
G01 X-36.80489 Y23.95208
G01 X-36.76600 Y23.88401
G01 X-36.72742 Y23.82963
G01 X-36.68403 Y23.77824
G01 X-35.71175 Y22.80598
G01 X-35.64182 Y22.75020
G01 X-35.56684 Y22.70306
G01 X-35.49658 Y22.66798
G01 X-35.42084 Y22.64731
G01 X-35.35513 Y22.63616
G01 X-35.28823 Y22.63052
G01 X-34.33667 Y22.63052
G01 X-34.24761 Y22.64058
G01 X-34.16128 Y22.66029
G01 X-34.05683 Y22.70014
G01 X-34.03730 Y22.71093
G01 X-34.01805 Y22.72231
G01 X-33.98485 Y22.74314
G01 X-33.89968 Y22.77296
G01 X-33.83248 Y22.78050
G01 X-30.98747 Y22.78050
G01 X-30.92026 Y22.77296
G01 X-30.83507 Y22.74314
G01 X-30.80198 Y22.72234
G01 X-30.72131 Y22.68350
G01 X-30.63772 Y22.65424
G01 X-30.52789 Y22.63240
G01 X-30.50561 Y22.63115
G01 X-30.48331 Y22.63052
G01 X-29.93949 Y22.63052
G01 X-29.85047 Y22.64055
G01 X-29.76411 Y22.66026
G01 X-29.67958 Y22.68985
G01 X-29.60373 Y22.73750
G01 X-29.53449 Y22.79272
G01 X-29.47117 Y22.85604
G01 X-29.42352 Y22.93186
G01 X-29.38509 Y23.01164
G01 X-29.36109 Y23.07453
G01 X-29.34795 Y23.14055
G01 X-29.34298 Y23.18482
G01 X-29.34046 Y23.22950
G01 X-29.34046 Y25.53331
G01 X-29.31224 Y25.74771
G01 X-29.25623 Y25.95667
G01 X-29.17343 Y26.15660
G01 X-29.07071 Y26.33455
G01 X-29.06528 Y26.34392
G01 X-29.01905 Y26.40420
G01 X-28.93353 Y26.51563
G01 X-28.78232 Y26.66686
G01 X-28.72649 Y26.73688
G01 X-28.67938 Y26.81187
G01 X-28.64051 Y26.89254
G01 X-28.62057 Y26.97984
G01 X-28.61064 Y27.06785
G01 X-28.61052 Y27.15637
G01 X-28.62987 Y27.24278
G01 X-28.65796 Y27.32446
G01 X-28.69510 Y27.40330
G01 X-28.71824 Y27.44107
G01 X-28.78755 Y27.60841
G01 X-28.82982 Y27.78451
G01 X-28.84404 Y27.96503
G01 X-28.82982 Y28.14559
G01 X-28.81481 Y28.20818
G01 X-28.78755 Y28.32159
G01 X-28.71826 Y28.48895
G01 X-28.69515 Y28.52664
G01 X-28.65715 Y28.60787
G01 X-28.62885 Y28.69180
G01 X-28.60993 Y28.77930
G01 X-28.61092 Y28.86881
G01 X-28.62182 Y28.95669
G01 X-28.64237 Y29.04280
G01 X-28.68133 Y29.12225
G01 X-28.72771 Y29.19512
G01 X-28.78232 Y29.26319
G01 X-28.93355 Y29.41443
G01 X-29.06525 Y29.58608
G01 X-29.17343 Y29.77348
G01 X-29.25623 Y29.97338
G01 X-29.31224 Y30.18232
G01 X-29.34046 Y30.39682
G01 X-29.34046 Y30.61320
G01 X-29.31826 Y30.78186
G01 X-29.31224 Y30.82776
G01 X-29.25623 Y31.03667
G01 X-29.17343 Y31.23657
G01 X-29.06525 Y31.42397
G01 X-28.93353 Y31.59563
G01 X-27.68636 Y32.84279
G01 X-27.68174 Y32.84744
G01 X-27.51057 Y33.01861
G01 X-27.33892 Y33.15031
G01 X-27.15151 Y33.25849
G01 X-26.95167 Y33.34129
G01 X-26.74265 Y33.39730
G01 X-26.52817 Y33.42552
G01 X-21.98950 Y33.42552
G01 X-21.90047 Y33.43555
G01 X-21.81411 Y33.45526
G01 X-21.72958 Y33.48485
G01 X-21.65374 Y33.53250
G01 X-21.58449 Y33.58772
G01 X-21.52117 Y33.65104
G01 X-21.47352 Y33.72686
G01 X-21.43509 Y33.80664
G01 X-21.41109 Y33.86953
G01 X-21.39796 Y33.93555
G01 X-21.39298 Y33.97982
G01 X-21.39046 Y34.02450
G01 X-21.39046 Y38.06551
G01 X-21.40050 Y38.15454
G01 X-21.42021 Y38.24090
G01 X-21.44980 Y38.32543
G01 X-21.49745 Y38.40128
G01 X-21.55267 Y38.47052
G01 X-21.61599 Y38.53384
G01 X-21.69181 Y38.58149
G01 X-21.74223 Y38.60577
G01 X-21.77159 Y38.61992
G01 X-21.85615 Y38.64954
G01 X-21.94520 Y38.65957
G01 X-22.03377 Y38.65957
G01 X-22.12280 Y38.64954
G01 X-22.20735 Y38.61992
G01 X-22.28713 Y38.58149
G01 X-22.35406 Y38.54072
G01 X-22.41180 Y38.48769
G01 X-22.45622 Y38.43798
G01 X-22.49666 Y38.38421
G01 X-22.52587 Y38.33772
G01 X-22.58967 Y38.27392
G01 X-22.66610 Y38.22591
G01 X-22.75132 Y38.19609
G01 X-22.83024 Y38.18718
G01 X-22.83247 Y38.18703
G01 X-22.86623 Y38.18296
G01 X-22.92379 Y38.17354
G01 X-22.98282 Y38.15919
G01 X-23.05510 Y38.13569
G01 X-23.19508 Y38.11354
G01 X-26.02922 Y38.11354
G01 X-26.11824 Y38.10349
G01 X-26.20458 Y38.08378
G01 X-26.27892 Y38.05893
G01 X-26.34699 Y38.02005
G01 X-26.40138 Y37.98146
G01 X-26.45276 Y37.93808
G01 X-28.09167 Y36.29917
G01 X-28.14437 Y36.24644
G01 X-28.21379 Y36.19320
G01 X-28.31605 Y36.11472
G01 X-28.50338 Y36.00656
G01 X-28.70333 Y35.92376
G01 X-28.91227 Y35.86775
G01 X-29.12682 Y35.83953
G01 X-30.48331 Y35.83953
G01 X-30.57234 Y35.82947
G01 X-30.65867 Y35.80976
G01 X-30.76311 Y35.76991
G01 X-30.78265 Y35.75912
G01 X-30.80193 Y35.74774
G01 X-30.86921 Y35.70547
G01 X-30.93929 Y35.64959
G01 X-31.00193 Y35.58696
G01 X-31.05778 Y35.51690
G01 X-31.09667 Y35.43616
G01 X-31.12504 Y35.35505
G01 X-31.12590 Y35.35256
G01 X-31.14582 Y35.26529
G01 X-31.14582 Y35.17578
G01 X-31.13591 Y35.08779
G01 X-31.11811 Y35.00669
G01 X-31.08394 Y34.93103
G01 X-31.04574 Y34.86552
G01 X-31.00083 Y34.80316
G01 X-30.97884 Y34.77809
G01 X-30.84780 Y34.58198
G01 X-30.77287 Y34.43004
G01 X-30.77752 Y34.43004
G01 X-30.89316 Y34.64637
G01 X-30.93672 Y34.71157
G01 X-31.11084 Y34.92371
G01 X-31.16629 Y34.97916
G01 X-31.37843 Y35.15328
G01 X-31.44363 Y35.19684
G01 X-31.68567 Y35.32622
G01 X-31.75811 Y35.35622
G01 X-32.02075 Y35.43588
G01 X-32.09766 Y35.45119
G01 X-32.37078 Y35.47809
G01 X-32.44919 Y35.47809
G01 X-32.72232 Y35.45119
G01 X-32.79923 Y35.43588
G01 X-33.06187 Y35.35622
G01 X-33.13431 Y35.32622
G01 X-33.17987 Y35.30184
G01 X-33.37634 Y35.19684
G01 X-33.44154 Y35.15328
G01 X-33.65369 Y34.97916
G01 X-33.70913 Y34.92371
G01 X-33.88325 Y34.71157
G01 X-33.92681 Y34.64637
G01 X-34.04246 Y34.43004
G01 X-34.04708 Y34.43004
G01 X-33.97215 Y34.58198
G01 X-33.84111 Y34.77809
G01 X-33.81912 Y34.80316
G01 X-33.76783 Y34.87685
G01 X-33.72572 Y34.95478
G01 X-33.69222 Y35.03788
G01 X-33.67804 Y35.12638
G01 X-33.67393 Y35.21485
G01 X-33.67982 Y35.30415
G01 X-33.70540 Y35.38993
G01 X-33.74005 Y35.47141
G01 X-33.78028 Y35.54403
G01 X-33.83464 Y35.60679
G01 X-33.88996 Y35.65863
G01 X-33.95071 Y35.70547
G01 X-34.06128 Y35.77494
G01 X-34.12508 Y35.83872
G01 X-34.17309 Y35.91515
G01 X-34.20291 Y36.00032
G01 X-34.21045 Y36.06752
G01 X-34.21045 Y36.70824
G01 X-34.22051 Y36.79729
G01 X-34.24022 Y36.88363
G01 X-34.26506 Y36.95797
G01 X-34.30395 Y37.02604
G01 X-34.34253 Y37.08042
G01 X-34.38592 Y37.13181
G01 X-35.45820 Y38.20407
G01 X-35.52813 Y38.25985
G01 X-35.60311 Y38.30699
G01 X-35.67337 Y38.34207
G01 X-35.74911 Y38.36274
G01 X-35.81482 Y38.37389
G01 X-35.88175 Y38.37953
G01 X-38.86617 Y38.37953
G01 X-39.08067 Y38.40775
G01 X-39.28964 Y38.46376
G01 X-39.48949 Y38.54654
G01 X-39.49462 Y38.54948
G01 X-39.57631 Y38.58507
G01 X-39.66091 Y38.61118
G01 X-39.76386 Y38.62868
G01 X-39.77874 Y38.62924
G01 X-39.79375 Y38.62955
G01 X-40.28049 Y38.62955
G01 X-40.34768 Y38.63709
G01 X-40.43284 Y38.66688
G01 X-40.50927 Y38.71494
G01 X-40.57308 Y38.77872
G01 X-40.62108 Y38.85515
G01 X-40.65090 Y38.94037
G01 X-40.65847 Y39.00755
G01 X-40.65847 Y41.05250
G01 X-40.65090 Y41.11969
G01 X-40.62108 Y41.20490
G01 X-40.57308 Y41.28133
G01 X-40.50927 Y41.34511
G01 X-40.43284 Y41.39317
G01 X-40.34768 Y41.42296
G01 X-40.28049 Y41.43051
G01 X-39.79375 Y41.43051
G01 X-39.70470 Y41.44056
G01 X-39.61837 Y41.46027
G01 X-39.52037 Y41.49665
G01 X-39.50722 Y41.50361
G01 X-39.49424 Y41.51079
G01 X-39.48954 Y41.51349
G01 X-39.28964 Y41.59629
G01 X-39.08067 Y41.65230
G01 X-38.86617 Y41.68052
G01 X-34.84177 Y41.68052
G01 X-34.62727 Y41.65230
G01 X-34.41833 Y41.59629
G01 X-34.21843 Y41.51349
G01 X-34.03103 Y41.40531
G01 X-33.88818 Y41.29568
G01 X-33.85937 Y41.27358
G01 X-32.05176 Y39.46597
G01 X-31.98173 Y39.41014
G01 X-31.90675 Y39.36302
G01 X-31.83662 Y39.32799
G01 X-31.76098 Y39.30734
G01 X-31.69524 Y39.29617
G01 X-31.62821 Y39.29050
G01 X-30.98747 Y39.29050
G01 X-30.92026 Y39.28296
G01 X-30.83507 Y39.25314
G01 X-30.80198 Y39.23234
G01 X-30.72131 Y39.19350
G01 X-30.63772 Y39.16424
G01 X-30.52789 Y39.14240
G01 X-30.50561 Y39.14115
G01 X-30.48331 Y39.14052
G01 X-30.16675 Y39.14052
G01 X-30.07770 Y39.15058
G01 X-29.99136 Y39.17029
G01 X-29.91699 Y39.19515
G01 X-29.84887 Y39.23407
G01 X-29.79451 Y39.27265
G01 X-29.74323 Y39.31596
G01 X-29.51595 Y39.54321
G01 X-29.46004 Y39.61331
G01 X-29.41293 Y39.68832
G01 X-29.37795 Y39.75842
G01 X-29.35730 Y39.83401
G01 X-29.34612 Y39.89972
G01 X-29.34046 Y39.96678
G01 X-29.34046 Y42.04331
G01 X-29.31224 Y42.25771
G01 X-29.25623 Y42.46667
G01 X-29.17343 Y42.66660
G01 X-29.07071 Y42.84455
G01 X-29.06528 Y42.85395
G01 X-28.93355 Y43.02563
G01 X-28.78232 Y43.17686
G01 X-28.72649 Y43.24688
G01 X-28.67938 Y43.32187
G01 X-28.64051 Y43.40254
G01 X-28.62057 Y43.48984
G01 X-28.61064 Y43.57785
G01 X-28.61052 Y43.66637
G01 X-28.62987 Y43.75278
G01 X-28.65796 Y43.83446
G01 X-28.69515 Y43.91336
G01 X-28.71824 Y43.95107
G01 X-28.78755 Y44.11838
G01 X-28.82982 Y44.29451
G01 X-28.84404 Y44.47503
G01 X-28.82982 Y44.65557
G01 X-28.78758 Y44.83157
G01 X-28.71826 Y44.99895
G01 X-28.69515 Y45.03664
G01 X-28.65715 Y45.11787
G01 X-28.62885 Y45.20180
G01 X-28.60993 Y45.28930
G01 X-28.61092 Y45.37881
G01 X-28.62182 Y45.46669
G01 X-28.64237 Y45.55280
G01 X-28.68133 Y45.63225
G01 X-28.72771 Y45.70512
G01 X-28.78232 Y45.77319
G01 X-28.93355 Y45.92443
G01 X-29.06525 Y46.09608
G01 X-29.14267 Y46.23017
G01 X-29.17343 Y46.28345
G01 X-29.25623 Y46.48338
G01 X-29.31224 Y46.69232
G01 X-29.34046 Y46.90682
G01 X-29.34046 Y47.12323
G01 X-29.31224 Y47.33773
G01 X-29.25623 Y47.54667
G01 X-29.17343 Y47.74657
G01 X-29.06525 Y47.93397
G01 X-28.93355 Y48.10563
G01 X-27.94107 Y49.09808
G01 X-27.93574 Y49.10344
G01 X-27.76457 Y49.27461
G01 X-27.63671 Y49.37270
G01 X-27.59289 Y49.40633
G01 X-27.40551 Y49.51449
G01 X-27.20567 Y49.59729
G01 X-27.13599 Y49.61593
G01 X-26.99665 Y49.65330
G01 X-26.78217 Y49.68152
G01 X-21.98950 Y49.68152
G01 X-21.90047 Y49.69155
G01 X-21.81411 Y49.71126
G01 X-21.72958 Y49.74085
G01 X-21.65374 Y49.78850
G01 X-21.58449 Y49.84372
G01 X-21.52117 Y49.90704
G01 X-21.47352 Y49.98286
G01 X-21.43509 Y50.06264
G01 X-21.41109 Y50.12553
G01 X-21.39796 Y50.19155
G01 X-21.39298 Y50.23582
G01 X-21.39046 Y50.28050
G01 X-21.39046 Y54.53703
G01 X-21.40052 Y54.62606
G01 X-21.42023 Y54.71239
G01 X-21.44980 Y54.79692
G01 X-21.49745 Y54.87274
G01 X-21.55267 Y54.94198
G01 X-21.61599 Y55.00533
G01 X-21.69181 Y55.05296
G01 X-21.74220 Y55.07724
G01 X-21.77159 Y55.09139
G01 X-21.85615 Y55.12100
G01 X-21.94520 Y55.13106
G01 X-22.03377 Y55.13106
G01 X-22.12280 Y55.12100
G01 X-22.20735 Y55.09139
G01 X-22.28713 Y55.05296
G01 X-22.37977 Y54.99113
G01 X-22.39643 Y54.97627
G01 X-22.41309 Y54.96055
G01 X-22.46270 Y54.91092
G01 X-22.53910 Y54.86291
G01 X-22.62432 Y54.83312
G01 X-22.70324 Y54.82418
G01 X-22.70547 Y54.82403
G01 X-22.73923 Y54.81996
G01 X-22.79679 Y54.81054
G01 X-22.85582 Y54.79619
G01 X-22.92810 Y54.77269
G01 X-23.06808 Y54.75057
G01 X-26.02922 Y54.75057
G01 X-26.11824 Y54.74049
G01 X-26.20458 Y54.72078
G01 X-26.27892 Y54.69593
G01 X-26.34699 Y54.65705
G01 X-26.40138 Y54.61846
G01 X-26.45276 Y54.57508
G01 X-28.09985 Y52.92799
G01 X-28.27137 Y52.75644
G01 X-28.39924 Y52.65835
G01 X-28.44305 Y52.62474
G01 X-28.63043 Y52.51656
G01 X-28.83033 Y52.43376
G01 X-29.03927 Y52.37775
G01 X-29.14648 Y52.36366
G01 X-29.21318 Y52.35487
G01 X-29.25377 Y52.34953
G01 X-30.48331 Y52.34953
G01 X-30.57234 Y52.33947
G01 X-30.65867 Y52.31976
G01 X-30.76311 Y52.27991
G01 X-30.78265 Y52.26912
G01 X-30.80193 Y52.25774
G01 X-30.86921 Y52.21547
G01 X-30.93929 Y52.15959
G01 X-31.00193 Y52.09696
G01 X-31.05778 Y52.02690
G01 X-31.09667 Y51.94616
G01 X-31.12504 Y51.86505
G01 X-31.12590 Y51.86256
G01 X-31.14582 Y51.77529
G01 X-31.14582 Y51.68578
G01 X-31.13591 Y51.59779
G01 X-31.11811 Y51.51669
G01 X-31.08394 Y51.44103
G01 X-31.04574 Y51.37552
G01 X-31.00083 Y51.31316
G01 X-30.97884 Y51.28809
G01 X-30.84780 Y51.09198
G01 X-30.77287 Y50.94004
G01 X-30.77752 Y50.94004
G01 X-30.89316 Y51.15637
G01 X-30.93672 Y51.22157
G01 X-31.11084 Y51.43371
G01 X-31.16629 Y51.48916
G01 X-31.37843 Y51.66328
G01 X-31.44363 Y51.70684
G01 X-31.68567 Y51.83622
G01 X-31.75811 Y51.86622
G01 X-32.02075 Y51.94588
G01 X-32.09766 Y51.96119
G01 X-32.37078 Y51.98809
G01 X-32.44919 Y51.98809
G01 X-32.72232 Y51.96119
G01 X-32.79923 Y51.94588
G01 X-33.06187 Y51.86622
G01 X-33.13431 Y51.83622
G01 X-33.17987 Y51.81184
G01 X-33.37634 Y51.70684
G01 X-33.44154 Y51.66328
G01 X-33.65369 Y51.48916
G01 X-33.70913 Y51.43371
G01 X-33.88325 Y51.22157
G01 X-33.92681 Y51.15637
G01 X-34.04246 Y50.94004
G01 X-34.04708 Y50.94004
G01 X-33.97215 Y51.09198
G01 X-33.84111 Y51.28809
G01 X-33.81912 Y51.31316
G01 X-33.76783 Y51.38685
G01 X-33.72572 Y51.46478
G01 X-33.69222 Y51.54788
G01 X-33.67804 Y51.63638
G01 X-33.67393 Y51.72485
G01 X-33.67982 Y51.81415
G01 X-33.70540 Y51.89993
G01 X-33.74005 Y51.98141
G01 X-33.78028 Y52.05403
G01 X-33.83464 Y52.11679
G01 X-33.88996 Y52.16863
G01 X-33.95071 Y52.21547
G01 X-34.06128 Y52.28494
G01 X-34.12508 Y52.34872
G01 X-34.17309 Y52.42515
G01 X-34.20291 Y52.51032
G01 X-34.21045 Y52.57752
G01 X-34.21045 Y53.21824
G01 X-34.22051 Y53.30729
G01 X-34.24022 Y53.39363
G01 X-34.26506 Y53.46797
G01 X-34.30395 Y53.53604
G01 X-34.34253 Y53.59042
G01 X-34.38592 Y53.64181
G01 X-35.45820 Y54.71410
G01 X-35.52813 Y54.76985
G01 X-35.60311 Y54.81699
G01 X-35.67337 Y54.85209
G01 X-35.74911 Y54.87274
G01 X-35.81482 Y54.88389
G01 X-35.88175 Y54.88953
G01 X-38.86818 Y54.88953
G01 X-39.08268 Y54.91778
G01 X-39.29162 Y54.97379
G01 X-39.49152 Y55.05656
G01 X-39.49622 Y55.05926
G01 X-39.57831 Y55.09510
G01 X-39.66294 Y55.12121
G01 X-39.76587 Y55.13868
G01 X-39.78075 Y55.13924
G01 X-39.79576 Y55.13955
G01 X-40.28248 Y55.13955
G01 X-40.34968 Y55.14711
G01 X-40.43483 Y55.17688
G01 X-40.51128 Y55.22494
G01 X-40.57508 Y55.28875
G01 X-40.62309 Y55.36517
G01 X-40.65291 Y55.45031
G01 X-40.66045 Y55.51752
G01 X-40.66045 Y57.56253
G01 X-40.65291 Y57.62974
G01 X-40.62312 Y57.71488
G01 X-40.57506 Y57.79133
G01 X-40.51128 Y57.85511
G01 X-40.43483 Y57.90317
G01 X-40.34968 Y57.93296
G01 X-40.28248 Y57.94051
G01 X-39.79576 Y57.94051
G01 X-39.70673 Y57.95054
G01 X-39.62037 Y57.97025
G01 X-39.52236 Y58.00665
G01 X-39.50920 Y58.01361
G01 X-39.49622 Y58.02079
G01 X-39.49152 Y58.02349
G01 X-39.29162 Y58.10629
G01 X-39.08268 Y58.16230
G01 X-38.86818 Y58.19052
G01 X-34.84177 Y58.19052
G01 X-34.62727 Y58.16230
G01 X-34.41833 Y58.10629
G01 X-34.21843 Y58.02349
G01 X-34.03103 Y57.91531
G01 X-33.88818 Y57.80568
G01 X-33.85937 Y57.78358
G01 X-32.05176 Y55.97597
G01 X-31.98173 Y55.92014
G01 X-31.90675 Y55.87302
G01 X-31.83662 Y55.83799
G01 X-31.76098 Y55.81734
G01 X-31.69524 Y55.80619
G01 X-31.62821 Y55.80053
G01 X-30.98747 Y55.80053
G01 X-30.92026 Y55.79296
G01 X-30.83507 Y55.76317
G01 X-30.80198 Y55.74234
G01 X-30.72131 Y55.70353
G01 X-30.63772 Y55.67424
G01 X-30.52789 Y55.65240
G01 X-30.50561 Y55.65115
G01 X-30.48331 Y55.65052
G01 X-30.29375 Y55.65052
G01 X-30.20470 Y55.66060
G01 X-30.11836 Y55.68029
G01 X-30.04399 Y55.70515
G01 X-29.97587 Y55.74407
G01 X-29.92151 Y55.78265
G01 X-29.87020 Y55.82598
G01 X-29.51592 Y56.18023
G01 X-29.46004 Y56.25031
G01 X-29.41293 Y56.32532
G01 X-29.37795 Y56.39545
G01 X-29.35730 Y56.47101
G01 X-29.34612 Y56.53675
G01 X-29.34046 Y56.60378
G01 X-29.34046 Y58.55331
G01 X-29.31224 Y58.76771
G01 X-29.25623 Y58.97667
G01 X-29.17343 Y59.17660
G01 X-29.07071 Y59.35455
G01 X-29.06528 Y59.36395
G01 X-28.93355 Y59.53563
G01 X-28.78232 Y59.68686
G01 X-28.72649 Y59.75688
G01 X-28.67938 Y59.83187
G01 X-28.64051 Y59.91254
G01 X-28.62057 Y59.99984
G01 X-28.61064 Y60.08785
G01 X-28.61052 Y60.17637
G01 X-28.62987 Y60.26278
G01 X-28.65796 Y60.34446
G01 X-28.69510 Y60.42330
G01 X-28.71824 Y60.46107
G01 X-28.78755 Y60.62841
G01 X-28.82982 Y60.80451
G01 X-28.84404 Y60.98503
G01 X-28.82982 Y61.16559
G01 X-28.81481 Y61.22818
G01 X-28.78755 Y61.34159
G01 X-28.71826 Y61.50895
G01 X-28.69515 Y61.54664
G01 X-28.65715 Y61.62787
G01 X-28.62885 Y61.71180
G01 X-28.60993 Y61.79930
G01 X-28.61092 Y61.88881
G01 X-28.62182 Y61.97669
G01 X-28.64237 Y62.06280
G01 X-28.68133 Y62.14225
G01 X-28.72771 Y62.21512
G01 X-28.78232 Y62.28319
G01 X-28.93355 Y62.43443
G01 X-29.06525 Y62.60608
G01 X-29.17343 Y62.79348
G01 X-29.25623 Y62.99338
G01 X-29.31224 Y63.20232
G01 X-29.34046 Y63.41682
G01 X-29.34046 Y63.63320
G01 X-29.31826 Y63.80186
G01 X-29.31224 Y63.84776
G01 X-29.25623 Y64.05667
G01 X-29.17343 Y64.25657
G01 X-29.06525 Y64.44397
G01 X-28.93353 Y64.61563
G01 X-27.68636 Y65.86279
G01 X-27.68174 Y65.86744
G01 X-27.51057 Y66.03861
G01 X-27.38271 Y66.13670
G01 X-27.33889 Y66.17033
G01 X-27.15151 Y66.27849
G01 X-26.95167 Y66.36129
G01 X-26.74265 Y66.41730
G01 X-26.52817 Y66.44552
G01 X-21.98950 Y66.44552
G01 X-21.90047 Y66.45555
G01 X-21.81411 Y66.47526
G01 X-21.72958 Y66.50485
G01 X-21.65374 Y66.55250
G01 X-21.58449 Y66.60772
G01 X-21.52117 Y66.67104
G01 X-21.47352 Y66.74686
G01 X-21.43509 Y66.82664
G01 X-21.41109 Y66.88953
G01 X-21.39796 Y66.95555
G01 X-21.39298 Y66.99982
G01 X-21.39046 Y67.04450
G01 X-21.39046 Y68.08425
G01 X-21.40052 Y68.17330
G01 X-21.42023 Y68.25964
G01 X-21.44507 Y68.33398
G01 X-21.48396 Y68.40205
G01 X-21.52254 Y68.45644
G01 X-21.56593 Y68.50782
G01 X-21.79011 Y68.73200
G01 X-22.11495 Y69.05682
G01 X-22.12610 Y69.06802
G01 X-22.12643 Y69.06832
G01 X-22.90049 Y69.84239
G01 X-22.97052 Y69.89822
G01 X-23.04550 Y69.94533
G01 X-23.12978 Y69.98544
G01 X-23.23283 Y70.02041
G01 X-23.45625 Y70.13063
G01 X-23.66341 Y70.26903
G01 X-23.85071 Y70.43329
G01 X-24.01497 Y70.62059
G01 X-24.15337 Y70.82775
G01 X-24.26358 Y71.05117
G01 X-24.34365 Y71.28709
G01 X-24.39226 Y71.53144
G01 X-24.40857 Y71.78003
G01 X-24.39226 Y72.02862
G01 X-24.34365 Y72.27296
G01 X-24.26358 Y72.50888
G01 X-24.15337 Y72.73230
G01 X-24.01497 Y72.93946
G01 X-23.90829 Y73.06113
G01 X-23.89993 Y73.07060
G01 X-23.85071 Y73.12676
G01 X-23.66341 Y73.29102
G01 X-23.45625 Y73.42943
G01 X-23.23283 Y73.53964
G01 X-22.99691 Y73.61970
G01 X-22.75256 Y73.66831
G01 X-22.50397 Y73.68462
G01 X-22.25538 Y73.66831
G01 X-22.01104 Y73.61970
G01 X-21.77512 Y73.53964
G01 X-21.55170 Y73.42943
G01 X-21.34454 Y73.29102
G01 X-21.15724 Y73.12676
G01 X-20.99298 Y72.93946
G01 X-20.85457 Y72.73232
G01 X-20.78455 Y72.59034
G01 X-20.73613 Y72.51487
G01 X-20.68025 Y72.44617
G01 X-20.61637 Y72.38350
G01 X-20.54017 Y72.33659
G01 X-20.46004 Y72.29890
G01 X-20.37518 Y72.27007
G01 X-20.28600 Y72.26087
G01 X-20.19743 Y72.26171
G01 X-20.10855 Y72.27258
G01 X-20.02432 Y72.30294
G01 X-19.94490 Y72.34210
G01 X-19.85371 Y72.40400
G01 X-19.83852 Y72.41772
G01 X-19.82377 Y72.43174
G01 X-19.53461 Y72.72089
G01 X-19.41996 Y72.80418
G01 X-19.31729 Y72.85648
G01 X-19.29362 Y72.86854
G01 X-19.22628 Y72.89044
G01 X-19.15885 Y72.91236
G01 X-19.01884 Y72.93451
G01 X-16.71806 Y72.93451
G01 X-16.68814 Y72.92978
G01 X-16.57813 Y72.91236
G01 X-16.50582 Y72.88886
G01 X-16.44473 Y72.87418
G01 X-16.38715 Y72.86506
G01 X-16.38697 Y72.86613
G01 X-16.36850 Y72.86227
G01 X-16.27389 Y72.85180
G01 X-16.18910 Y72.82214
G01 X-16.11267 Y72.77413
G01 X-16.04887 Y72.71033
G01 X-16.00086 Y72.63390
G01 X-15.97104 Y72.54868
G01 X-15.96210 Y72.46928
G01 X-15.96198 Y72.46753
G01 X-15.95791 Y72.43377
G01 X-15.94849 Y72.37621
G01 X-15.93414 Y72.31718
G01 X-15.91064 Y72.24490
G01 X-15.88849 Y72.10492
G01 X-15.88849 Y71.96311
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-27.11966 Y59.98998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.11966 Y59.98998
G01 X-27.09551 Y59.98264
G01 X-27.02307 Y59.95264
G01 X-26.80696 Y59.83712
G01 X-26.74176 Y59.79356
G01 X-26.55233 Y59.63809
G01 X-26.49691 Y59.58267
G01 X-26.34143 Y59.39323
G01 X-26.29787 Y59.32803
G01 X-26.18235 Y59.11193
G01 X-26.15235 Y59.03949
G01 X-26.08123 Y58.80499
G01 X-26.06592 Y58.72808
G01 X-26.04192 Y58.48422
G01 X-26.03998 Y58.44500
G01 X-26.03998 Y56.55102
G01 X-23.13900 Y56.55102
G01 X-23.09978 Y56.54909
G01 X-23.00225 Y56.53949
G01 X-22.92534 Y56.52418
G01 X-22.83153 Y56.49575
G01 X-22.78393 Y56.47602
G01 X-22.71398 Y56.47602
G01 X-22.63595 Y56.46832
G01 X-22.56092 Y56.44556
G01 X-22.49176 Y56.40861
G01 X-22.43115 Y56.35885
G01 X-22.38139 Y56.29824
G01 X-22.34444 Y56.22908
G01 X-22.32168 Y56.15407
G01 X-22.31398 Y56.07604
G01 X-22.31398 Y56.00607
G01 X-22.29427 Y55.95847
G01 X-22.26582 Y55.86469
G01 X-22.25053 Y55.78778
G01 X-22.24091 Y55.69022
G01 X-22.24091 Y55.61181
G01 X-22.25053 Y55.51430
G01 X-22.26488 Y55.44206
G01 X-22.26582 Y55.43739
G01 X-22.29427 Y55.34356
G01 X-22.31398 Y55.29596
G01 X-22.31398 Y55.22601
G01 X-22.32168 Y55.14800
G01 X-22.34444 Y55.07295
G01 X-22.38139 Y55.00381
G01 X-22.42854 Y54.94633
G01 X-22.43522 Y54.93983
G01 X-22.48652 Y54.89776
G01 X-22.50253 Y54.88768
G01 X-22.55869 Y54.85766
G01 X-22.56976 Y54.85377
G01 X-22.63595 Y54.83370
G01 X-22.71398 Y54.82601
G01 X-22.78393 Y54.82601
G01 X-22.83153 Y54.80632
G01 X-22.92534 Y54.77785
G01 X-23.00225 Y54.76258
G01 X-23.09978 Y54.75293
G01 X-23.13900 Y54.75100
G01 X-26.32325 Y54.75100
G01 X-26.34143 Y54.72380
G01 X-26.49691 Y54.53437
G01 X-26.52325 Y54.50528
G01 X-28.19525 Y52.83328
G01 X-28.22433 Y52.80694
G01 X-28.41377 Y52.65146
G01 X-28.47897 Y52.60790
G01 X-28.69507 Y52.49238
G01 X-28.76751 Y52.46239
G01 X-29.00201 Y52.39127
G01 X-29.07892 Y52.37595
G01 X-29.32278 Y52.35195
G01 X-29.36200 Y52.35002
G01 X-30.70020 Y52.35002
G01 X-30.72715 Y52.31717
G01 X-30.78775 Y52.26742
G01 X-30.85692 Y52.23046
G01 X-30.93195 Y52.20770
G01 X-31.00998 Y52.20000
G01 X-33.81000 Y52.20000
G01 X-33.88803 Y52.20770
G01 X-33.96306 Y52.23046
G01 X-33.99836 Y52.24933
G01 X-34.04101 Y52.27465
G01 X-34.08483 Y52.31060
G01 X-34.09940 Y52.32517
G01 X-34.13822 Y52.37249
G01 X-34.14838 Y52.38865
G01 X-34.17835 Y52.44468
G01 X-34.18223 Y52.45583
G01 X-34.20230 Y52.52197
G01 X-34.21000 Y52.60000
G01 X-34.21000 Y53.46655
G01 X-35.63344 Y54.89002
G01 X-38.76000 Y54.89002
G01 X-38.79919 Y54.89195
G01 X-39.04306 Y54.91595
G01 X-39.11997 Y54.93127
G01 X-39.35446 Y55.00239
G01 X-39.42690 Y55.03238
G01 X-39.62825 Y55.14003
G01 X-40.26000 Y55.14003
G01 X-40.33803 Y55.14770
G01 X-40.40402 Y55.16771
G01 X-40.41534 Y55.17168
G01 X-40.47120 Y55.20155
G01 X-40.48758 Y55.21183
G01 X-40.53475 Y55.25057
G01 X-40.54946 Y55.26525
G01 X-40.58822 Y55.31247
G01 X-40.59840 Y55.32870
G01 X-40.62835 Y55.38471
G01 X-40.63223 Y55.39583
G01 X-40.65230 Y55.46200
G01 X-40.66000 Y55.54000
G01 X-40.66000 Y57.54002
G01 X-40.65230 Y57.61805
G01 X-40.63218 Y57.68440
G01 X-40.62837 Y57.69527
G01 X-40.59833 Y57.75148
G01 X-40.58827 Y57.76751
G01 X-40.54935 Y57.81493
G01 X-40.53490 Y57.82938
G01 X-40.48743 Y57.86832
G01 X-40.47155 Y57.87830
G01 X-40.41517 Y57.90845
G01 X-40.40475 Y57.91208
G01 X-40.33803 Y57.93233
G01 X-40.26000 Y57.94002
G01 X-39.62825 Y57.94002
G01 X-39.42690 Y58.04764
G01 X-39.35446 Y58.07764
G01 X-39.11997 Y58.14876
G01 X-39.04306 Y58.16408
G01 X-38.79919 Y58.18808
G01 X-38.76000 Y58.19001
G01 X-34.95000 Y58.19001
G01 X-34.91078 Y58.18808
G01 X-34.66692 Y58.16408
G01 X-34.59001 Y58.14876
G01 X-34.35551 Y58.07764
G01 X-34.28307 Y58.04764
G01 X-34.06697 Y57.93212
G01 X-34.00177 Y57.88856
G01 X-33.81233 Y57.73309
G01 X-33.78325 Y57.70675
G01 X-31.87652 Y55.80005
G01 X-31.00998 Y55.80005
G01 X-30.93195 Y55.79233
G01 X-30.86487 Y55.77198
G01 X-30.85491 Y55.76850
G01 X-30.78775 Y55.73261
G01 X-30.72715 Y55.68288
G01 X-30.70020 Y55.65003
G01 X-30.04544 Y55.65003
G01 X-29.33998 Y56.35549
G01 X-29.33998 Y58.44500
G01 X-29.33805 Y58.48422
G01 X-29.31404 Y58.72808
G01 X-29.29873 Y58.80499
G01 X-29.22761 Y59.03949
G01 X-29.19761 Y59.11193
G01 X-29.08209 Y59.32803
G01 X-29.03853 Y59.39323
G01 X-28.88306 Y59.58267
G01 X-28.82763 Y59.63809
G01 X-28.63820 Y59.79356
G01 X-28.57300 Y59.83712
G01 X-28.35690 Y59.95264
G01 X-28.28446 Y59.98264
G01 X-28.26025 Y59.98998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-28.26025 Y61.98007 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.26025 Y61.98007
G01 X-28.29523 Y61.96138
G01 X-28.36043 Y61.91781
G01 X-28.47407 Y61.82455
G01 X-28.52951 Y61.76910
G01 X-28.62278 Y61.65546
G01 X-28.66637 Y61.59026
G01 X-28.73566 Y61.46059
G01 X-28.76568 Y61.38815
G01 X-28.80836 Y61.24743
G01 X-28.82365 Y61.17055
G01 X-28.83805 Y61.02422
G01 X-28.83805 Y60.94581
G01 X-28.82365 Y60.79948
G01 X-28.80836 Y60.72259
G01 X-28.76568 Y60.58188
G01 X-28.73566 Y60.50944
G01 X-28.66637 Y60.37977
G01 X-28.62278 Y60.31457
G01 X-28.52951 Y60.20093
G01 X-28.47407 Y60.14548
G01 X-28.36043 Y60.05221
G01 X-28.29523 Y60.00865
G01 X-28.26025 Y59.98998
G01 X-28.14453 Y59.97858
G01 X-28.07320 Y59.97502
G01 X-28.02604 Y59.97502
G01 X-27.96348 Y59.97197
G01 X-27.92174 Y59.96786
G01 X-27.86429 Y59.96501
G01 X-27.51565 Y59.96501
G01 X-27.45819 Y59.96786
G01 X-27.41646 Y59.97197
G01 X-27.35390 Y59.97502
G01 X-27.30673 Y59.97502
G01 X-27.23541 Y59.97858
G01 X-27.11966 Y59.98998
G01 X-27.08476 Y60.00865
G01 X-27.01956 Y60.05221
G01 X-26.97958 Y60.08500
G01 X-23.31383 Y60.08500
G01 X-23.22320 Y60.01063
G01 X-23.15800 Y59.96707
G01 X-23.01970 Y59.89313
G01 X-22.94726 Y59.86313
G01 X-22.79717 Y59.81762
G01 X-22.72026 Y59.80230
G01 X-22.56420 Y59.78693
G01 X-22.48579 Y59.78693
G01 X-22.32971 Y59.80230
G01 X-22.25279 Y59.81762
G01 X-22.10273 Y59.86313
G01 X-22.03029 Y59.89313
G01 X-21.89196 Y59.96707
G01 X-21.82679 Y60.01063
G01 X-21.70555 Y60.11012
G01 X-21.65010 Y60.16557
G01 X-21.55061 Y60.28680
G01 X-21.50705 Y60.35201
G01 X-21.43311 Y60.49031
G01 X-21.40311 Y60.56275
G01 X-21.38996 Y60.60608
G01 X-21.38998 Y49.68101
G01 X-26.67399 Y49.68101
G01 X-26.71319 Y49.67908
G01 X-26.95705 Y49.65508
G01 X-27.03396 Y49.63976
G01 X-27.26846 Y49.56864
G01 X-27.34090 Y49.53864
G01 X-27.55700 Y49.42312
G01 X-27.62220 Y49.37956
G01 X-27.81163 Y49.22409
G01 X-27.84072 Y49.19775
G01 X-28.85672 Y48.18175
G01 X-28.88306 Y48.15267
G01 X-29.03853 Y47.96323
G01 X-29.08209 Y47.89803
G01 X-29.19761 Y47.68193
G01 X-29.22761 Y47.60949
G01 X-29.29873 Y47.37499
G01 X-29.31404 Y47.29808
G01 X-29.33805 Y47.05422
G01 X-29.33805 Y46.97581
G01 X-29.31404 Y46.73194
G01 X-29.29873 Y46.65503
G01 X-29.22761 Y46.42054
G01 X-29.19761 Y46.34810
G01 X-29.08209 Y46.13199
G01 X-29.03853 Y46.06679
G01 X-28.88306 Y45.87736
G01 X-28.82763 Y45.82194
G01 X-28.63820 Y45.66646
G01 X-28.57300 Y45.62290
G01 X-28.35690 Y45.50738
G01 X-28.28446 Y45.47739
G01 X-28.26025 Y45.47007
G01 X-28.14453 Y45.48147
G01 X-28.07320 Y45.48503
G01 X-28.02604 Y45.48503
G01 X-27.96348 Y45.48808
G01 X-27.92174 Y45.49219
G01 X-27.86429 Y45.49504
G01 X-27.51565 Y45.49504
G01 X-27.45819 Y45.49219
G01 X-27.41646 Y45.48808
G01 X-27.35390 Y45.48503
G01 X-27.30673 Y45.48503
G01 X-27.23541 Y45.48147
G01 X-27.11964 Y45.47007
G01 X-27.09551 Y45.47739
G01 X-27.02307 Y45.50738
G01 X-26.80696 Y45.62290
G01 X-26.74176 Y45.66646
G01 X-26.63795 Y45.75165
G01 X-26.55233 Y45.82194
G01 X-26.52325 Y45.84828
G01 X-25.99053 Y46.38102
G01 X-21.38998 Y46.38102
G01 X-21.38998 Y33.42501
G01 X-26.41999 Y33.42501
G01 X-26.45919 Y33.42308
G01 X-26.70305 Y33.39908
G01 X-26.77996 Y33.38376
G01 X-27.01446 Y33.31264
G01 X-27.08690 Y33.28264
G01 X-27.30300 Y33.16712
G01 X-27.36820 Y33.12356
G01 X-27.55763 Y32.96809
G01 X-27.58672 Y32.94175
G01 X-28.85672 Y31.67175
G01 X-28.88306 Y31.64267
G01 X-29.03853 Y31.45323
G01 X-29.08209 Y31.38803
G01 X-29.19761 Y31.17193
G01 X-29.22761 Y31.09949
G01 X-29.29873 Y30.86499
G01 X-29.31404 Y30.78808
G01 X-29.33805 Y30.54422
G01 X-29.33805 Y30.46581
G01 X-29.31404 Y30.22194
G01 X-29.29873 Y30.14503
G01 X-29.22761 Y29.91054
G01 X-29.19761 Y29.83810
G01 X-29.08209 Y29.62199
G01 X-29.03853 Y29.55679
G01 X-28.88306 Y29.36736
G01 X-28.82763 Y29.31194
G01 X-28.63820 Y29.15646
G01 X-28.57300 Y29.11290
G01 X-28.35690 Y28.99738
G01 X-28.28446 Y28.96739
G01 X-28.26025 Y28.96007
G01 X-28.14453 Y28.97147
G01 X-28.07320 Y28.97503
G01 X-28.02604 Y28.97503
G01 X-27.96348 Y28.97808
G01 X-27.92174 Y28.98219
G01 X-27.86429 Y28.98504
G01 X-27.51565 Y28.98504
G01 X-27.45819 Y28.98219
G01 X-27.41646 Y28.97808
G01 X-27.35390 Y28.97503
G01 X-27.30673 Y28.97503
G01 X-27.23541 Y28.97147
G01 X-27.11964 Y28.96007
G01 X-27.09551 Y28.96739
G01 X-27.02307 Y28.99738
G01 X-26.80696 Y29.11290
G01 X-26.74176 Y29.15646
G01 X-26.63795 Y29.24165
G01 X-26.55233 Y29.31194
G01 X-26.52325 Y29.33828
G01 X-25.73653 Y30.12502
G01 X-21.38998 Y30.12502
G01 X-21.38998 Y19.09347
G01 X-23.56844 Y16.91501
G01 X-26.41999 Y16.91501
G01 X-26.45919 Y16.91308
G01 X-26.70305 Y16.88908
G01 X-26.77996 Y16.87376
G01 X-27.01446 Y16.80264
G01 X-27.08690 Y16.77264
G01 X-27.30300 Y16.65712
G01 X-27.36820 Y16.61356
G01 X-27.55763 Y16.45809
G01 X-27.58672 Y16.43175
G01 X-28.85672 Y15.16175
G01 X-28.88306 Y15.13267
G01 X-29.03853 Y14.94323
G01 X-29.08209 Y14.87803
G01 X-29.19761 Y14.66193
G01 X-29.22761 Y14.58949
G01 X-29.29873 Y14.35499
G01 X-29.31404 Y14.27808
G01 X-29.33805 Y14.03422
G01 X-29.33805 Y13.95581
G01 X-29.31404 Y13.71194
G01 X-29.29873 Y13.63503
G01 X-29.22761 Y13.40054
G01 X-29.19761 Y13.32810
G01 X-29.08209 Y13.11199
G01 X-29.03853 Y13.04679
G01 X-28.88306 Y12.85736
G01 X-28.82763 Y12.80194
G01 X-28.63820 Y12.64646
G01 X-28.57300 Y12.60290
G01 X-28.35690 Y12.48738
G01 X-28.28446 Y12.45739
G01 X-28.26025 Y12.45007
G01 X-28.14453 Y12.46147
G01 X-28.07320 Y12.46503
G01 X-28.02604 Y12.46503
G01 X-27.96348 Y12.46808
G01 X-27.92174 Y12.47219
G01 X-27.86429 Y12.47504
G01 X-27.71656 Y12.47501
G01 X-27.66338 Y12.47504
G01 X-27.51565 Y12.47504
G01 X-27.45819 Y12.47219
G01 X-27.41646 Y12.46808
G01 X-27.35390 Y12.46503
G01 X-27.30673 Y12.46503
G01 X-27.23541 Y12.46147
G01 X-27.11964 Y12.45007
G01 X-27.09551 Y12.45739
G01 X-27.02307 Y12.48738
G01 X-26.80696 Y12.60290
G01 X-26.74176 Y12.64646
G01 X-26.63795 Y12.73165
G01 X-26.55233 Y12.80194
G01 X-26.52325 Y12.82828
G01 X-25.73653 Y13.61502
G01 X-22.88500 Y13.61502
G01 X-22.84578 Y13.61695
G01 X-22.60192 Y13.64095
G01 X-22.52501 Y13.65627
G01 X-22.29051 Y13.72739
G01 X-22.21807 Y13.75738
G01 X-22.00197 Y13.87290
G01 X-21.93677 Y13.91646
G01 X-21.74733 Y14.07194
G01 X-21.71825 Y14.09828
G01 X-18.57325 Y17.24328
G01 X-18.54691 Y17.27236
G01 X-18.39144 Y17.46180
G01 X-18.34787 Y17.52700
G01 X-18.23235 Y17.74310
G01 X-18.20236 Y17.81554
G01 X-18.13124 Y18.05003
G01 X-18.11592 Y18.12694
G01 X-18.09192 Y18.37081
G01 X-18.08999 Y18.41000
G01 X-18.08999 Y69.01602
G01 X-18.09192 Y69.05524
G01 X-18.11592 Y69.29911
G01 X-18.13124 Y69.37602
G01 X-18.20236 Y69.61051
G01 X-18.23238 Y69.68295
G01 X-18.34787 Y69.89908
G01 X-18.39146 Y69.96426
G01 X-18.54691 Y70.15369
G01 X-18.57327 Y70.18277
G01 X-19.02217 Y70.63164
G01 X-19.04985 Y70.65935
G01 X-18.57520 Y71.13400
G01 X-16.78900 Y71.13400
G01 X-16.74978 Y71.13593
G01 X-16.65225 Y71.14556
G01 X-16.57534 Y71.16085
G01 X-16.48153 Y71.18930
G01 X-16.43393 Y71.20901
G01 X-16.36398 Y71.20901
G01 X-16.28595 Y71.21670
G01 X-16.21976 Y71.23677
G01 X-16.20869 Y71.24066
G01 X-16.15253 Y71.27065
G01 X-16.13650 Y71.28074
G01 X-16.08905 Y71.31968
G01 X-16.07465 Y71.33408
G01 X-16.03566 Y71.38158
G01 X-16.02570 Y71.39745
G01 X-15.99558 Y71.45379
G01 X-15.99185 Y71.46443
G01 X-15.97168 Y71.53098
G01 X-15.96398 Y71.60901
G01 X-15.96398 Y71.67896
G01 X-15.94427 Y71.72656
G01 X-15.91582 Y71.82036
G01 X-15.90053 Y71.89727
G01 X-15.89091 Y71.99481
G01 X-15.89091 Y72.07322
G01 X-15.90053 Y72.17075
G01 X-15.91582 Y72.24766
G01 X-15.94427 Y72.34147
G01 X-15.96398 Y72.38907
G01 X-15.96398 Y72.45902
G01 X-15.97168 Y72.53705
G01 X-15.99190 Y72.60372
G01 X-15.99555 Y72.61419
G01 X-16.02578 Y72.67073
G01 X-16.03561 Y72.68635
G01 X-16.07478 Y72.73407
G01 X-16.08893 Y72.74822
G01 X-16.13663 Y72.78739
G01 X-16.15227 Y72.79722
G01 X-16.20881 Y72.82745
G01 X-16.21923 Y72.83108
G01 X-16.28595 Y72.85132
G01 X-16.36398 Y72.85902
G01 X-16.43393 Y72.85902
G01 X-16.48153 Y72.87873
G01 X-16.57534 Y72.90718
G01 X-16.65225 Y72.92247
G01 X-16.74978 Y72.93209
G01 X-16.78900 Y72.93402
G01 X-18.94800 Y72.93402
G01 X-18.98719 Y72.93209
G01 X-19.08473 Y72.92247
G01 X-19.16164 Y72.90718
G01 X-19.25544 Y72.87873
G01 X-19.32788 Y72.84873
G01 X-19.41432 Y72.80253
G01 X-19.47952 Y72.75894
G01 X-19.55529 Y72.69676
G01 X-19.58437 Y72.67040
G01 X-20.32265 Y71.93215
G01 X-20.68084 Y72.29031
G01 X-20.73540 Y72.47014
G01 X-20.76540 Y72.54258
G01 X-20.90400 Y72.80192
G01 X-20.94759 Y72.86712
G01 X-21.13413 Y73.09442
G01 X-21.18958 Y73.14987
G01 X-21.41688 Y73.33641
G01 X-21.48208 Y73.38000
G01 X-21.74142 Y73.51860
G01 X-21.81386 Y73.54860
G01 X-22.09524 Y73.63397
G01 X-22.17215 Y73.64926
G01 X-22.46478 Y73.67809
G01 X-22.54319 Y73.67809
G01 X-22.83583 Y73.64926
G01 X-22.91274 Y73.63397
G01 X-23.19412 Y73.54860
G01 X-23.26656 Y73.51860
G01 X-23.52589 Y73.38000
G01 X-23.59109 Y73.33641
G01 X-23.81840 Y73.14987
G01 X-23.87385 Y73.09442
G01 X-24.06038 Y72.86712
G01 X-24.10397 Y72.80192
G01 X-24.24258 Y72.54258
G01 X-24.27258 Y72.47014
G01 X-24.35795 Y72.18876
G01 X-24.37324 Y72.11185
G01 X-24.40207 Y71.81922
G01 X-24.40207 Y71.74081
G01 X-24.37324 Y71.44817
G01 X-24.35795 Y71.37126
G01 X-24.27258 Y71.08988
G01 X-24.24258 Y71.01744
G01 X-24.10397 Y70.75811
G01 X-24.06038 Y70.69291
G01 X-23.87385 Y70.46560
G01 X-23.81840 Y70.41015
G01 X-23.59109 Y70.22361
G01 X-23.52589 Y70.18003
G01 X-23.26656 Y70.04142
G01 X-23.19412 Y70.01142
G01 X-23.01429 Y69.95686
G01 X-22.01972 Y68.96228
G01 X-21.38998 Y68.33256
G01 X-21.38998 Y66.44501
G01 X-26.41999 Y66.44501
G01 X-26.45919 Y66.44308
G01 X-26.70305 Y66.41908
G01 X-26.77996 Y66.40376
G01 X-27.01446 Y66.33264
G01 X-27.08690 Y66.30264
G01 X-27.30300 Y66.18712
G01 X-27.36820 Y66.14356
G01 X-27.55763 Y65.98809
G01 X-27.58672 Y65.96175
G01 X-28.85672 Y64.69175
G01 X-28.88306 Y64.66267
G01 X-29.03853 Y64.47323
G01 X-29.08209 Y64.40803
G01 X-29.19761 Y64.19193
G01 X-29.22761 Y64.11949
G01 X-29.29873 Y63.88499
G01 X-29.31404 Y63.80808
G01 X-29.33805 Y63.56422
G01 X-29.33805 Y63.48581
G01 X-29.31404 Y63.24194
G01 X-29.29873 Y63.16503
G01 X-29.22761 Y62.93054
G01 X-29.19761 Y62.85810
G01 X-29.08209 Y62.64199
G01 X-29.03853 Y62.57679
G01 X-28.88306 Y62.38736
G01 X-28.82763 Y62.33194
G01 X-28.63820 Y62.17646
G01 X-28.57300 Y62.13290
G01 X-28.35690 Y62.01738
G01 X-28.28446 Y61.98739
G01 X-28.26025 Y61.98007
G01 X-28.14453 Y61.99147
G01 X-28.07320 Y61.99503
G01 X-28.02604 Y61.99503
G01 X-27.96348 Y61.99808
G01 X-27.92174 Y62.00219
G01 X-27.86429 Y62.00504
G01 X-27.51565 Y62.00504
G01 X-27.45819 Y62.00219
G01 X-27.41646 Y61.99808
G01 X-27.35390 Y61.99503
G01 X-27.30673 Y61.99503
G01 X-27.23541 Y61.99147
G01 X-27.11964 Y61.98007
G01 X-27.09551 Y61.98739
G01 X-27.02307 Y62.01738
G01 X-26.80696 Y62.13290
G01 X-26.74176 Y62.17646
G01 X-26.63795 Y62.26165
G01 X-26.55233 Y62.33194
G01 X-26.52325 Y62.35828
G01 X-25.73653 Y63.14502
G01 X-21.38998 Y63.14502
G01 X-21.38996 Y61.36392
G01 X-21.37342 Y61.25244
G01 X-21.36605 Y61.17794
G01 X-21.35836 Y61.02112
G01 X-21.35836 Y60.94891
G01 X-21.36605 Y60.79211
G01 X-21.37342 Y60.71761
G01 X-21.38996 Y60.60608
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-21.38996 Y61.36392 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.38996 Y61.36392
G01 X-21.40311 Y61.40727
G01 X-21.43311 Y61.47972
G01 X-21.50705 Y61.61802
G01 X-21.55061 Y61.68322
G01 X-21.65010 Y61.80445
G01 X-21.70555 Y61.85990
G01 X-21.75419 Y61.89983
G01 X-21.82679 Y61.95939
G01 X-21.89196 Y62.00296
G01 X-22.03029 Y62.07690
G01 X-22.10273 Y62.10689
G01 X-22.25279 Y62.15241
G01 X-22.32971 Y62.16773
G01 X-22.48579 Y62.18309
G01 X-22.56420 Y62.18309
G01 X-22.72026 Y62.16773
G01 X-22.79717 Y62.15241
G01 X-22.94726 Y62.10689
G01 X-23.01970 Y62.07690
G01 X-23.15800 Y62.00296
G01 X-23.22320 Y61.95939
G01 X-23.31383 Y61.88502
G01 X-26.97958 Y61.88502
G01 X-27.01956 Y61.91781
G01 X-27.08476 Y61.96138
G01 X-27.11964 Y61.98007
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-30.77287 Y65.95001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.77287 Y65.95001
G01 X-30.77752 Y65.95001
G01 X-30.89316 Y65.73366
G01 X-30.93672 Y65.66846
G01 X-31.11084 Y65.45631
G01 X-31.16629 Y65.40087
G01 X-31.37843 Y65.22675
G01 X-31.44363 Y65.18319
G01 X-31.65996 Y65.06754
G01 X-31.65996 Y65.06292
G01 X-31.50802 Y65.13785
G01 X-31.31186 Y65.26891
G01 X-31.13446 Y65.42451
G01 X-30.97886 Y65.60191
G01 X-30.84780 Y65.79807
G01 X-30.77287 Y65.95001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-30.77287 Y67.45004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.77287 Y67.45004
G01 X-30.77752 Y67.45004
G01 X-30.89316 Y67.66637
G01 X-30.93672 Y67.73157
G01 X-31.11084 Y67.94371
G01 X-31.16629 Y67.99916
G01 X-31.37843 Y68.17328
G01 X-31.44363 Y68.21684
G01 X-31.65996 Y68.33248
G01 X-31.65996 Y68.33713
G01 X-31.50802 Y68.26220
G01 X-31.31186 Y68.13114
G01 X-31.13446 Y67.97554
G01 X-30.97886 Y67.79814
G01 X-30.84780 Y67.60198
G01 X-30.77287 Y67.45004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-25.68398 Y70.28000 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.68398 Y70.28000
G01 X-25.68398 Y70.25760
G01 X-25.69155 Y70.19047
G01 X-25.72132 Y70.10538
G01 X-25.76927 Y70.02905
G01 X-25.83300 Y69.96532
G01 X-25.90930 Y69.91737
G01 X-25.99442 Y69.88760
G01 X-26.06155 Y69.88003
G01 X-26.08395 Y69.88003
G01 X-26.00595 Y69.88770
G01 X-25.93092 Y69.91046
G01 X-25.86175 Y69.94742
G01 X-25.80115 Y69.99717
G01 X-25.75139 Y70.05778
G01 X-25.71443 Y70.12694
G01 X-25.69167 Y70.20197
G01 X-25.68398 Y70.28000
G01 X-25.68398 Y71.03001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-25.68398 Y72.53004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.68398 Y72.53004
G01 X-25.68398 Y73.30245
G01 X-25.69155 Y73.36958
G01 X-25.72132 Y73.45467
G01 X-25.76927 Y73.53100
G01 X-25.83300 Y73.59473
G01 X-25.90930 Y73.64268
G01 X-25.99442 Y73.67245
G01 X-26.06155 Y73.68002
G01 X-26.83396 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-25.68398 Y73.28002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.68398 Y73.28002
G01 X-25.69167 Y73.35805
G01 X-25.71443 Y73.43308
G01 X-25.75139 Y73.50225
G01 X-25.80115 Y73.56285
G01 X-25.86175 Y73.61261
G01 X-25.93092 Y73.64957
G01 X-26.00595 Y73.67233
G01 X-26.08398 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-28.33399 Y73.68002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.33399 Y73.68002
G01 X-29.10640 Y73.68002
G01 X-29.17353 Y73.67245
G01 X-29.25862 Y73.64268
G01 X-29.33495 Y73.59473
G01 X-29.39868 Y73.53100
G01 X-29.44663 Y73.45470
G01 X-29.47640 Y73.36958
G01 X-29.48397 Y73.30245
G01 X-29.48397 Y73.28005
G01 X-29.47630 Y73.35805
G01 X-29.45354 Y73.43308
G01 X-29.41658 Y73.50225
G01 X-29.36683 Y73.56285
G01 X-29.30622 Y73.61261
G01 X-29.23706 Y73.64957
G01 X-29.16203 Y73.67233
G01 X-29.08400 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-29.08402 Y69.88003 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.08402 Y69.88003
G01 X-29.16203 Y69.88770
G01 X-29.23706 Y69.91046
G01 X-29.30622 Y69.94742
G01 X-29.36670 Y69.99707
G01 X-29.33495 Y69.96532
G01 X-29.25862 Y69.91737
G01 X-29.17353 Y69.88760
G01 X-29.10640 Y69.88003
G01 X-29.08402 Y69.88003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-29.36693 Y69.99730 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.36693 Y69.99730
G01 X-29.41658 Y70.05778
G01 X-29.45354 Y70.12694
G01 X-29.47630 Y70.20197
G01 X-29.48397 Y70.27998
G01 X-29.48397 Y70.25760
G01 X-29.47640 Y70.19047
G01 X-29.44663 Y70.10535
G01 X-29.39868 Y70.02905
G01 X-29.36693 Y69.99730
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-31.76799 Y71.00754 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.76799 Y71.00754
G01 X-31.77553 Y70.94043
G01 X-31.80530 Y70.85539
G01 X-31.85326 Y70.77906
G01 X-31.88511 Y70.74721
G01 X-31.94576 Y70.69743
G01 X-32.01490 Y70.66047
G01 X-32.08996 Y70.63771
G01 X-32.16784 Y70.63004
G01 X-32.14548 Y70.63004
G01 X-32.07838 Y70.63758
G01 X-31.99334 Y70.66735
G01 X-31.91701 Y70.71531
G01 X-31.88511 Y70.74721
G01 X-31.83540 Y70.80779
G01 X-31.79844 Y70.87693
G01 X-31.77569 Y70.95199
G01 X-31.76799 Y71.03001
G01 X-31.76799 Y71.00754
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-31.76799 Y72.53004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.76799 Y72.53004
G01 X-31.77569 Y72.60804
G01 X-31.79844 Y72.68310
G01 X-31.83540 Y72.75224
G01 X-31.88513 Y72.81287
G01 X-31.94576 Y72.86260
G01 X-32.01490 Y72.89956
G01 X-32.08996 Y72.92231
G01 X-32.16796 Y72.93001
G01 X-32.14548 Y72.93001
G01 X-32.07838 Y72.92247
G01 X-31.99334 Y72.89270
G01 X-31.91701 Y72.84474
G01 X-31.88513 Y72.81287
G01 X-31.85326 Y72.78099
G01 X-31.80530 Y72.70466
G01 X-31.77553 Y72.61962
G01 X-31.76799 Y72.55252
G01 X-31.76799 Y72.53004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.66799 Y72.93001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.66799 Y72.93001
G01 X-33.74601 Y72.92231
G01 X-33.82107 Y72.89956
G01 X-33.89021 Y72.86260
G01 X-33.95079 Y72.81289
G01 X-34.00057 Y72.75224
G01 X-34.03753 Y72.68310
G01 X-34.06029 Y72.60804
G01 X-34.06796 Y72.53016
G01 X-34.06796 Y72.55252
G01 X-34.06042 Y72.61962
G01 X-34.03065 Y72.70466
G01 X-33.98269 Y72.78099
G01 X-33.91894 Y72.84474
G01 X-33.84261 Y72.89270
G01 X-33.75757 Y72.92247
G01 X-33.69046 Y72.93001
G01 X-33.66799 Y72.93001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.95097 Y70.74736 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.95097 Y70.74736
G01 X-34.00057 Y70.80779
G01 X-34.03753 Y70.87693
G01 X-34.06029 Y70.95199
G01 X-34.06796 Y71.02986
G01 X-34.06796 Y71.00754
G01 X-34.06042 Y70.94043
G01 X-34.03065 Y70.85539
G01 X-33.98269 Y70.77906
G01 X-33.95097 Y70.74736
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.66814 Y70.63004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.66814 Y70.63004
G01 X-33.74601 Y70.63771
G01 X-33.82107 Y70.66047
G01 X-33.89021 Y70.69743
G01 X-33.95064 Y70.74703
G01 X-33.91894 Y70.71531
G01 X-33.84261 Y70.66735
G01 X-33.75757 Y70.63758
G01 X-33.69046 Y70.63004
G01 X-33.66814 Y70.63004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.15999 Y68.33248 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.15999 Y68.33248
G01 X-33.37634 Y68.21684
G01 X-33.44154 Y68.17328
G01 X-33.65369 Y67.99916
G01 X-33.70913 Y67.94371
G01 X-33.88325 Y67.73157
G01 X-33.92681 Y67.66637
G01 X-34.04246 Y67.45004
G01 X-34.04708 Y67.45004
G01 X-33.97215 Y67.60198
G01 X-33.84109 Y67.79814
G01 X-33.68549 Y67.97554
G01 X-33.50809 Y68.13114
G01 X-33.31193 Y68.26220
G01 X-33.15999 Y68.33713
G01 X-33.15999 Y68.33248
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.15999 Y65.06292 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.15999 Y65.06292
G01 X-33.31193 Y65.13785
G01 X-33.50809 Y65.26891
G01 X-33.68549 Y65.42451
G01 X-33.84109 Y65.60191
G01 X-33.97215 Y65.79807
G01 X-34.04708 Y65.95001
G01 X-34.04246 Y65.95001
G01 X-33.92681 Y65.73366
G01 X-33.88325 Y65.66846
G01 X-33.70913 Y65.45631
G01 X-33.65369 Y65.40087
G01 X-33.44154 Y65.22675
G01 X-33.37634 Y65.18319
G01 X-33.15999 Y65.06754
G01 X-33.15999 Y65.06292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07641 Y63.29002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07641 Y63.29002
G01 X-37.09343 Y63.26056
G01 X-37.20514 Y63.11494
G01 X-37.33491 Y62.98520
G01 X-37.48050 Y62.87349
G01 X-37.63945 Y62.78172
G01 X-37.80897 Y62.71149
G01 X-37.98627 Y62.66399
G01 X-38.00996 Y62.66087
G01 X-38.00996 Y62.66427
G01 X-37.94877 Y62.67646
G01 X-37.76120 Y62.73336
G01 X-37.68875 Y62.76336
G01 X-37.51586 Y62.85579
G01 X-37.45066 Y62.89935
G01 X-37.29912 Y63.02371
G01 X-37.24367 Y63.07915
G01 X-37.11931 Y63.23069
G01 X-37.07966 Y63.29002
G01 X-37.07641 Y63.29002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07641 Y64.79005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07641 Y64.79005
G01 X-37.09343 Y64.81951
G01 X-37.20514 Y64.96508
G01 X-37.33491 Y65.09485
G01 X-37.48050 Y65.20658
G01 X-37.63943 Y65.29833
G01 X-37.80900 Y65.36856
G01 X-37.98627 Y65.41608
G01 X-38.00996 Y65.41920
G01 X-38.00996 Y65.41575
G01 X-37.94877 Y65.40358
G01 X-37.76120 Y65.34666
G01 X-37.68875 Y65.31667
G01 X-37.51586 Y65.22426
G01 X-37.45066 Y65.18070
G01 X-37.29912 Y65.05632
G01 X-37.24367 Y65.00087
G01 X-37.11931 Y64.84933
G01 X-37.07969 Y64.79005
G01 X-37.07641 Y64.79005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50999 Y62.66084 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50999 Y62.66084
G01 X-39.50999 Y62.66427
G01 X-39.57120 Y62.67646
G01 X-39.75878 Y62.73336
G01 X-39.83122 Y62.76336
G01 X-40.00412 Y62.85579
G01 X-40.06932 Y62.89935
G01 X-40.22086 Y63.02371
G01 X-40.27630 Y63.07915
G01 X-40.40066 Y63.23069
G01 X-40.44031 Y63.29002
G01 X-40.44354 Y63.29002
G01 X-40.42652 Y63.26056
G01 X-40.31481 Y63.11494
G01 X-40.18504 Y62.98520
G01 X-40.03945 Y62.87349
G01 X-39.88050 Y62.78172
G01 X-39.71093 Y62.71149
G01 X-39.53366 Y62.66397
G01 X-39.50999 Y62.66084
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50999 Y65.41575 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50999 Y65.41575
G01 X-39.50999 Y65.41920
G01 X-39.53366 Y65.41608
G01 X-39.71093 Y65.36856
G01 X-39.88052 Y65.29833
G01 X-40.03945 Y65.20658
G01 X-40.18504 Y65.09485
G01 X-40.31481 Y64.96508
G01 X-40.42652 Y64.81951
G01 X-40.44354 Y64.79005
G01 X-40.44029 Y64.79005
G01 X-40.40066 Y64.84933
G01 X-40.27630 Y65.00087
G01 X-40.22086 Y65.05632
G01 X-40.06932 Y65.18070
G01 X-40.00412 Y65.22426
G01 X-39.83122 Y65.31667
G01 X-39.75878 Y65.34666
G01 X-39.57120 Y65.40358
G01 X-39.50999 Y65.41575
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.72498 Y69.99484 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.72498 Y69.99484
G01 X-37.72670 Y69.95783
G01 X-37.73013 Y69.92095
G01 X-37.74103 Y69.85834
G01 X-37.76168 Y69.79824
G01 X-37.79704 Y69.71706
G01 X-37.84174 Y69.63952
G01 X-37.90257 Y69.57383
G01 X-37.96965 Y69.51600
G01 X-38.04369 Y69.46545
G01 X-47.79216 Y64.30450
G01 X-48.51998 Y63.91918
G01 X-48.51998 Y0.72452
G01 X-48.52249 Y0.67986
G01 X-48.52747 Y0.63557
G01 X-48.54060 Y0.56953
G01 X-48.56460 Y0.50663
G01 X-48.60303 Y0.42685
G01 X-48.65068 Y0.35103
G01 X-48.71401 Y0.28771
G01 X-48.78325 Y0.23249
G01 X-48.85907 Y0.18484
G01 X-48.94360 Y0.15528
G01 X-49.02993 Y0.13557
G01 X-49.11898 Y0.12551
G01 X-60.20187 Y0.12551
G01 X-60.22417 Y0.12614
G01 X-60.24644 Y0.12739
G01 X-60.35627 Y0.14923
G01 X-60.43987 Y0.17849
G01 X-60.52059 Y0.21738
G01 X-60.59061 Y0.27323
G01 X-60.65323 Y0.33587
G01 X-60.70903 Y0.40587
G01 X-60.74787 Y0.48652
G01 X-60.76420 Y0.53313
G01 X-60.77713 Y0.57011
G01 X-60.79707 Y0.65741
G01 X-60.79709 Y0.74699
G01 X-60.78718 Y0.83501
G01 X-60.76725 Y0.92238
G01 X-60.72836 Y1.00310
G01 X-60.68124 Y1.07806
G01 X-60.62541 Y1.14809
G01 X-57.26522 Y4.50825
G01 X-57.09715 Y4.71902
G01 X-56.95369 Y4.94734
G01 X-56.83672 Y5.19027
G01 X-56.74767 Y5.44472
G01 X-56.68765 Y5.70764
G01 X-56.65748 Y5.97553
G01 X-56.65748 Y14.64483
G01 X-56.68765 Y14.91275
G01 X-56.74767 Y15.17562
G01 X-56.83670 Y15.43007
G01 X-56.95369 Y15.67303
G01 X-57.09712 Y15.90132
G01 X-57.26522 Y16.11209
G01 X-57.45590 Y16.30277
G01 X-57.49380 Y16.33299
G01 X-57.55712 Y16.39632
G01 X-57.61234 Y16.46556
G01 X-57.65999 Y16.54140
G01 X-57.68958 Y16.62593
G01 X-57.70929 Y16.71229
G01 X-57.71932 Y16.80132
G01 X-57.70926 Y16.89035
G01 X-57.68955 Y16.97668
G01 X-57.65999 Y17.06121
G01 X-57.61234 Y17.13703
G01 X-57.55712 Y17.20627
G01 X-57.49387 Y17.26952
G01 X-57.47795 Y17.28227
G01 X-57.47518 Y17.28501
G01 X-57.46230 Y17.29733
G01 X-57.44950 Y17.30904
G01 X-57.43667 Y17.32029
G01 X-57.42986 Y17.32598
G01 X-57.36385 Y17.39598
G01 X-57.35920 Y17.40081
G01 X-57.35516 Y17.40495
G01 X-57.35171 Y17.40846
G01 X-57.26720 Y17.49299
G01 X-57.25468 Y17.50868
G01 X-57.24416 Y17.52133
G01 X-57.24282 Y17.52286
G01 X-57.24119 Y17.52507
G01 X-57.23751 Y17.52989
G01 X-57.23347 Y17.53515
G01 X-57.22900 Y17.54092
G01 X-57.09913 Y17.70373
G01 X-56.95567 Y17.93203
G01 X-56.83870 Y18.17495
G01 X-56.74965 Y18.42943
G01 X-56.68966 Y18.69227
G01 X-56.65948 Y18.96022
G01 X-56.65948 Y31.15483
G01 X-56.68966 Y31.42278
G01 X-56.74965 Y31.68562
G01 X-56.83868 Y31.94007
G01 X-56.88501 Y32.03621
G01 X-56.95570 Y32.18303
G01 X-57.09913 Y32.41132
G01 X-57.26723 Y32.62209
G01 X-57.45791 Y32.81277
G01 X-57.49481 Y32.84221
G01 X-57.55813 Y32.90553
G01 X-57.61335 Y32.97477
G01 X-57.66100 Y33.05059
G01 X-57.69057 Y33.13512
G01 X-57.71028 Y33.22145
G01 X-57.72034 Y33.31048
G01 X-57.71031 Y33.39951
G01 X-57.69059 Y33.48587
G01 X-57.66100 Y33.57040
G01 X-57.61335 Y33.64624
G01 X-57.55813 Y33.71548
G01 X-57.49463 Y33.77896
G01 X-57.47792 Y33.79227
G01 X-57.47538 Y33.79481
G01 X-57.46263 Y33.80703
G01 X-57.44983 Y33.81876
G01 X-57.43614 Y33.83032
G01 X-57.43634 Y33.83057
G01 X-57.42984 Y33.83603
G01 X-57.36385 Y33.90598
G01 X-57.35923 Y33.91078
G01 X-57.35521 Y33.91490
G01 X-57.35171 Y33.91846
G01 X-57.26522 Y34.00494
G01 X-57.25214 Y34.02135
G01 X-57.24472 Y34.03029
G01 X-57.24282 Y34.03281
G01 X-57.23880 Y34.03801
G01 X-57.23469 Y34.04325
G01 X-57.09712 Y34.21574
G01 X-56.95369 Y34.44403
G01 X-56.83672 Y34.68693
G01 X-56.74767 Y34.94144
G01 X-56.68765 Y35.20430
G01 X-56.65748 Y35.47222
G01 X-56.65748 Y47.66483
G01 X-56.68765 Y47.93275
G01 X-56.74767 Y48.19562
G01 X-56.83670 Y48.45007
G01 X-56.95369 Y48.69303
G01 X-57.09712 Y48.92132
G01 X-57.26522 Y49.13209
G01 X-57.45590 Y49.32277
G01 X-57.49380 Y49.35299
G01 X-57.55712 Y49.41632
G01 X-57.61234 Y49.48556
G01 X-57.65999 Y49.56140
G01 X-57.68958 Y49.64593
G01 X-57.70929 Y49.73229
G01 X-57.71932 Y49.82132
G01 X-57.70926 Y49.91035
G01 X-57.68955 Y49.99668
G01 X-57.65999 Y50.08121
G01 X-57.61234 Y50.15703
G01 X-57.55712 Y50.22627
G01 X-57.49387 Y50.28952
G01 X-57.47795 Y50.30227
G01 X-57.47518 Y50.30501
G01 X-57.46230 Y50.31733
G01 X-57.44950 Y50.32904
G01 X-57.43667 Y50.34029
G01 X-57.42986 Y50.34598
G01 X-57.36385 Y50.41598
G01 X-57.35920 Y50.42081
G01 X-57.35516 Y50.42495
G01 X-57.35171 Y50.42846
G01 X-57.26720 Y50.51299
G01 X-57.25468 Y50.52868
G01 X-57.24416 Y50.54133
G01 X-57.24282 Y50.54286
G01 X-57.24119 Y50.54507
G01 X-57.23751 Y50.54989
G01 X-57.23347 Y50.55515
G01 X-57.22900 Y50.56092
G01 X-57.09913 Y50.72373
G01 X-56.95567 Y50.95203
G01 X-56.83870 Y51.19495
G01 X-56.74965 Y51.44943
G01 X-56.68966 Y51.71227
G01 X-56.65948 Y51.98022
G01 X-56.65948 Y64.17483
G01 X-56.68966 Y64.44278
G01 X-56.74965 Y64.70562
G01 X-56.83870 Y64.96007
G01 X-56.88610 Y65.05855
G01 X-56.95567 Y65.20303
G01 X-57.09913 Y65.43132
G01 X-57.26723 Y65.64209
G01 X-57.45791 Y65.83277
G01 X-57.66867 Y66.00086
G01 X-57.89697 Y66.14432
G01 X-58.13987 Y66.26129
G01 X-58.39438 Y66.35034
G01 X-58.65724 Y66.41034
G01 X-58.88335 Y66.43581
G01 X-58.92514 Y66.44051
G01 X-59.19476 Y66.44051
G01 X-59.25310 Y66.43396
G01 X-59.46273 Y66.41034
G01 X-59.72557 Y66.35034
G01 X-59.98005 Y66.26129
G01 X-60.22297 Y66.14432
G01 X-60.45124 Y66.00086
G01 X-60.48967 Y65.97021
G01 X-60.66206 Y65.83274
G01 X-60.73697 Y65.75786
G01 X-60.75305 Y65.74265
G01 X-60.76968 Y65.72776
G01 X-60.86285 Y65.66548
G01 X-60.94266 Y65.62705
G01 X-61.02719 Y65.59746
G01 X-61.11622 Y65.58743
G01 X-61.20476 Y65.58743
G01 X-61.29376 Y65.59746
G01 X-61.37829 Y65.62705
G01 X-61.40771 Y65.64120
G01 X-61.45810 Y65.66548
G01 X-61.53394 Y65.71313
G01 X-61.59729 Y65.77648
G01 X-61.65251 Y65.84572
G01 X-61.70016 Y65.92154
G01 X-61.72973 Y66.00607
G01 X-61.74944 Y66.09241
G01 X-61.75950 Y66.18143
G01 X-61.75950 Y71.91482
G01 X-61.78967 Y72.18277
G01 X-61.84967 Y72.44563
G01 X-61.93872 Y72.70011
G01 X-61.99493 Y72.81685
G01 X-62.05569 Y72.94302
G01 X-62.19915 Y73.17134
G01 X-62.36724 Y73.38213
G01 X-62.55787 Y73.57276
G01 X-62.76869 Y73.74085
G01 X-62.99696 Y73.88431
G01 X-63.23989 Y74.00128
G01 X-63.49437 Y74.09033
G01 X-63.69434 Y74.13598
G01 X-63.75723 Y74.15033
G01 X-63.98334 Y74.17580
G01 X-64.02515 Y74.18050
G01 X-69.37482 Y74.18050
G01 X-69.43317 Y74.17395
G01 X-69.64269 Y74.15035
G01 X-69.84269 Y74.10468
G01 X-69.90558 Y74.09033
G01 X-70.16001 Y74.00128
G01 X-70.40296 Y73.88431
G01 X-70.60385 Y73.75808
G01 X-70.68457 Y73.71921
G01 X-70.76814 Y73.68998
G01 X-70.80517 Y73.68155
G01 X-70.91485 Y73.64314
G01 X-70.99128 Y73.59513
G01 X-71.05506 Y73.53133
G01 X-71.10312 Y73.45488
G01 X-71.14149 Y73.34522
G01 X-71.14990 Y73.30827
G01 X-71.17914 Y73.22468
G01 X-71.21810 Y73.14380
G01 X-71.30842 Y73.00006
G01 X-71.33309 Y72.96082
G01 X-71.34538 Y72.94241
G01 X-71.35828 Y72.92419
G01 X-71.43527 Y72.84271
G01 X-71.50451 Y72.78749
G01 X-71.58036 Y72.73984
G01 X-71.66489 Y72.71025
G01 X-71.75125 Y72.69054
G01 X-71.84027 Y72.68051
G01 X-75.02584 Y72.68051
G01 X-75.16585 Y72.65836
G01 X-75.23813 Y72.63486
G01 X-75.29716 Y72.62051
G01 X-75.35472 Y72.61109
G01 X-75.38848 Y72.60702
G01 X-75.39071 Y72.60687
G01 X-75.46963 Y72.59796
G01 X-75.55485 Y72.56814
G01 X-75.63128 Y72.52013
G01 X-75.69508 Y72.45633
G01 X-75.74309 Y72.37990
G01 X-75.77291 Y72.29471
G01 X-75.78101 Y72.22275
G01 X-75.78268 Y72.20565
G01 X-75.78731 Y72.18206
G01 X-75.78601 Y72.18185
G01 X-75.79513 Y72.12427
G01 X-75.80981 Y72.06318
G01 X-75.83331 Y71.99090
G01 X-75.85546 Y71.85092
G01 X-75.85546 Y71.70913
G01 X-75.83331 Y71.56915
G01 X-75.80981 Y71.49687
G01 X-75.79546 Y71.43784
G01 X-75.78604 Y71.38028
G01 X-75.78197 Y71.34652
G01 X-75.78182 Y71.34429
G01 X-75.77291 Y71.26537
G01 X-75.74309 Y71.18015
G01 X-75.69508 Y71.10372
G01 X-75.63128 Y71.03992
G01 X-75.55485 Y70.99191
G01 X-75.47006 Y70.96225
G01 X-75.37545 Y70.95178
G01 X-75.35698 Y70.94792
G01 X-75.35680 Y70.94899
G01 X-75.29922 Y70.93987
G01 X-75.23813 Y70.92519
G01 X-75.16585 Y70.90169
G01 X-75.02587 Y70.87954
G01 X-71.84027 Y70.87954
G01 X-71.81752 Y70.87888
G01 X-71.79521 Y70.87761
G01 X-71.68592 Y70.85585
G01 X-71.60233 Y70.82661
G01 X-71.52156 Y70.78772
G01 X-71.45148 Y70.73182
G01 X-71.38887 Y70.66918
G01 X-71.33306 Y70.59920
G01 X-71.24436 Y70.45801
G01 X-71.21810 Y70.41625
G01 X-71.17914 Y70.33537
G01 X-71.14990 Y70.25178
G01 X-71.14149 Y70.21483
G01 X-71.10309 Y70.10515
G01 X-71.05508 Y70.02872
G01 X-70.99128 Y69.96492
G01 X-70.91485 Y69.91691
G01 X-70.80517 Y69.87851
G01 X-70.76814 Y69.87007
G01 X-70.68457 Y69.84084
G01 X-70.60385 Y69.80197
G01 X-70.40296 Y69.67574
G01 X-70.25443 Y69.60421
G01 X-70.17858 Y69.55656
G01 X-70.10934 Y69.50134
G01 X-70.04599 Y69.43799
G01 X-69.99834 Y69.36215
G01 X-69.95991 Y69.28234
G01 X-69.93032 Y69.19781
G01 X-69.92029 Y69.10878
G01 X-69.92029 Y69.02024
G01 X-69.93032 Y68.93124
G01 X-69.95991 Y68.84671
G01 X-69.97406 Y68.81729
G01 X-69.99834 Y68.76690
G01 X-70.04599 Y68.69106
G01 X-70.10934 Y68.62771
G01 X-70.17858 Y68.57249
G01 X-70.25443 Y68.52484
G01 X-70.33896 Y68.49525
G01 X-70.42532 Y68.47554
G01 X-70.51434 Y68.46550
G01 X-73.18477 Y68.46550
G01 X-73.45272 Y68.43533
G01 X-73.71556 Y68.37533
G01 X-73.97006 Y68.28628
G01 X-74.21296 Y68.16931
G01 X-74.44126 Y68.02588
G01 X-74.65205 Y67.85776
G01 X-79.92271 Y62.58710
G01 X-80.09083 Y62.37631
G01 X-80.23426 Y62.14802
G01 X-80.35123 Y61.90511
G01 X-80.44028 Y61.65061
G01 X-80.50028 Y61.38777
G01 X-80.53045 Y61.11982
G01 X-80.53045 Y60.85023
G01 X-80.50028 Y60.58228
G01 X-80.44028 Y60.31944
G01 X-80.35123 Y60.06494
G01 X-80.23426 Y59.82204
G01 X-80.09083 Y59.59374
G01 X-79.92271 Y59.38295
G01 X-79.73205 Y59.19229
G01 X-79.52126 Y59.02417
G01 X-79.29296 Y58.88074
G01 X-79.05006 Y58.76377
G01 X-78.79556 Y58.67472
G01 X-78.53272 Y58.61472
G01 X-78.26477 Y58.58455
G01 X-77.99518 Y58.58455
G01 X-77.72723 Y58.61472
G01 X-77.46439 Y58.67472
G01 X-77.20988 Y58.76377
G01 X-76.96698 Y58.88074
G01 X-76.73869 Y59.02417
G01 X-76.52790 Y59.19229
G01 X-72.23110 Y63.48908
G01 X-72.17972 Y63.53247
G01 X-72.12534 Y63.57105
G01 X-72.05727 Y63.60994
G01 X-71.98292 Y63.63478
G01 X-71.89659 Y63.65449
G01 X-71.80756 Y63.66455
G01 X-67.09949 Y63.66455
G01 X-67.05458 Y63.66201
G01 X-67.01029 Y63.65700
G01 X-66.94437 Y63.64387
G01 X-66.88158 Y63.61989
G01 X-66.80180 Y63.58146
G01 X-66.72598 Y63.53381
G01 X-66.66266 Y63.47049
G01 X-66.60744 Y63.40125
G01 X-66.55979 Y63.32543
G01 X-66.53023 Y63.24090
G01 X-66.51052 Y63.15457
G01 X-66.50046 Y63.06551
G01 X-66.50046 Y54.84861
G01 X-66.50338 Y54.80043
G01 X-66.50914 Y54.75293
G01 X-66.52329 Y54.68560
G01 X-66.54877 Y54.62164
G01 X-66.58849 Y54.54252
G01 X-66.63739 Y54.46749
G01 X-66.70175 Y54.40521
G01 X-66.77191 Y54.35113
G01 X-66.84856 Y54.30470
G01 X-66.93363 Y54.27653
G01 X-67.02029 Y54.25827
G01 X-67.10714 Y54.24968
G01 X-67.19378 Y54.26017
G01 X-67.27455 Y54.27904
G01 X-67.32474 Y54.29568
G01 X-67.32507 Y54.29474
G01 X-67.33782 Y54.29939
G01 X-67.35700 Y54.30691
G01 X-67.37523 Y54.31463
G01 X-67.37592 Y54.31491
G01 X-67.48956 Y54.35466
G01 X-67.49251 Y54.35570
G01 X-67.49484 Y54.35654
G01 X-67.49654 Y54.35717
G01 X-67.61493 Y54.40025
G01 X-67.62517 Y54.40325
G01 X-67.75380 Y54.43261
G01 X-67.75674 Y54.43327
G01 X-67.88806 Y54.46434
G01 X-68.02517 Y54.47973
G01 X-68.02763 Y54.48006
G01 X-68.16014 Y54.49550
G01 X-68.43977 Y54.49550
G01 X-68.57315 Y54.47993
G01 X-68.57482 Y54.47973
G01 X-68.71254 Y54.46424
G01 X-68.84132 Y54.43370
G01 X-68.84579 Y54.43269
G01 X-68.97678 Y54.40264
G01 X-68.98498 Y54.40025
G01 X-69.10335 Y54.35717
G01 X-69.10508 Y54.35654
G01 X-69.10741 Y54.35570
G01 X-69.22415 Y54.31488
G01 X-69.22461 Y54.31466
G01 X-69.24290 Y54.30696
G01 X-69.24998 Y54.30414
G01 X-69.35494 Y54.25141
G01 X-69.35930 Y54.24928
G01 X-69.36228 Y54.24780
G01 X-69.36388 Y54.24704
G01 X-69.46512 Y54.19827
G01 X-69.47228 Y54.19401
G01 X-69.48884 Y54.18471
G01 X-69.50149 Y54.17795
G01 X-69.59306 Y54.11773
G01 X-69.59618 Y54.11572
G01 X-69.59961 Y54.11349
G01 X-69.60335 Y54.11112
G01 X-69.63291 Y54.09256
G01 X-69.69179 Y54.05552
G01 X-69.70393 Y54.04630
G01 X-69.71864 Y54.03564
G01 X-69.73352 Y54.02535
G01 X-69.73581 Y54.02383
G01 X-69.81440 Y53.95791
G01 X-69.81785 Y53.95504
G01 X-69.82166 Y53.95192
G01 X-69.82593 Y53.94846
G01 X-69.90197 Y53.88783
G01 X-69.90457 Y53.88524
G01 X-69.91765 Y53.87272
G01 X-69.93045 Y53.86101
G01 X-69.94328 Y53.84976
G01 X-69.95008 Y53.84407
G01 X-70.01610 Y53.77407
G01 X-70.02075 Y53.76924
G01 X-70.02478 Y53.76510
G01 X-70.02826 Y53.76157
G01 X-74.00118 Y49.78865
G01 X-74.20771 Y49.58210
G01 X-74.37583 Y49.37131
G01 X-74.49996 Y49.17375
G01 X-74.51926 Y49.14301
G01 X-74.63623 Y48.90011
G01 X-74.72531 Y48.64558
G01 X-74.73316 Y48.61116
G01 X-74.76272 Y48.52671
G01 X-74.80115 Y48.44690
G01 X-74.84880 Y48.37106
G01 X-74.91215 Y48.30771
G01 X-74.98139 Y48.25249
G01 X-75.05721 Y48.20484
G01 X-75.14174 Y48.17527
G01 X-75.22808 Y48.15556
G01 X-75.31713 Y48.14550
G01 X-87.04756 Y48.14550
G01 X-87.11461 Y48.15117
G01 X-87.18032 Y48.16234
G01 X-87.25592 Y48.18299
G01 X-87.32602 Y48.21797
G01 X-87.40103 Y48.26509
G01 X-87.47110 Y48.32097
G01 X-91.13289 Y51.98276
G01 X-91.34369 Y52.15085
G01 X-91.57196 Y52.29431
G01 X-91.81489 Y52.41128
G01 X-92.06937 Y52.50033
G01 X-92.26934 Y52.54598
G01 X-92.33223 Y52.56033
G01 X-92.55834 Y52.58580
G01 X-92.60015 Y52.59050
G01 X-95.29949 Y52.59050
G01 X-95.34439 Y52.59304
G01 X-95.38866 Y52.59805
G01 X-95.45455 Y52.61118
G01 X-95.51729 Y52.63513
G01 X-95.59710 Y52.67356
G01 X-95.67294 Y52.72121
G01 X-95.73629 Y52.78456
G01 X-95.79151 Y52.85380
G01 X-95.83916 Y52.92962
G01 X-95.86872 Y53.01415
G01 X-95.88844 Y53.10048
G01 X-95.89849 Y53.18951
G01 X-95.89849 Y56.48392
G01 X-95.92064 Y56.62390
G01 X-95.94414 Y56.69618
G01 X-95.95846 Y56.75521
G01 X-95.96791 Y56.81277
G01 X-95.97198 Y56.84653
G01 X-95.97213 Y56.84876
G01 X-95.98102 Y56.92768
G01 X-96.01086 Y57.01290
G01 X-96.05884 Y57.08933
G01 X-96.12267 Y57.15313
G01 X-96.19908 Y57.20114
G01 X-96.28389 Y57.23080
G01 X-96.37850 Y57.24127
G01 X-96.39694 Y57.24513
G01 X-96.39712 Y57.24406
G01 X-96.45470 Y57.25318
G01 X-96.51582 Y57.26786
G01 X-96.58813 Y57.29136
G01 X-96.69814 Y57.30878
G01 X-96.72806 Y57.31351
G01 X-96.86984 Y57.31351
G01 X-97.00985 Y57.29136
G01 X-97.08211 Y57.26786
G01 X-97.14114 Y57.25351
G01 X-97.19872 Y57.24409
G01 X-97.23248 Y57.24002
G01 X-97.23471 Y57.23987
G01 X-97.31363 Y57.23096
G01 X-97.39885 Y57.20114
G01 X-97.47525 Y57.15313
G01 X-97.53908 Y57.08933
G01 X-97.58709 Y57.01290
G01 X-97.61675 Y56.92811
G01 X-97.62722 Y56.83350
G01 X-97.63108 Y56.81503
G01 X-97.63001 Y56.81485
G01 X-97.63913 Y56.75727
G01 X-97.65381 Y56.69618
G01 X-97.67728 Y56.62387
G01 X-97.67921 Y56.61188
G01 X-97.69946 Y56.48392
G01 X-97.69946 Y52.62815
G01 X-97.70951 Y52.53912
G01 X-97.72922 Y52.45278
G01 X-97.75879 Y52.36825
G01 X-97.80641 Y52.29243
G01 X-97.86163 Y52.22319
G01 X-97.92498 Y52.15987
G01 X-98.14705 Y51.98276
G01 X-98.33771 Y51.79210
G01 X-98.50583 Y51.58131
G01 X-98.64924 Y51.35302
G01 X-98.76623 Y51.11011
G01 X-98.85528 Y50.85561
G01 X-98.91528 Y50.59277
G01 X-98.94543 Y50.32482
G01 X-98.94543 Y50.05523
G01 X-98.91528 Y49.78728
G01 X-98.85528 Y49.52444
G01 X-98.76623 Y49.26994
G01 X-98.64924 Y49.02704
G01 X-98.50583 Y48.79874
G01 X-98.33771 Y48.58795
G01 X-98.14705 Y48.39729
G01 X-97.93626 Y48.22917
G01 X-97.82173 Y48.15721
G01 X-97.78503 Y48.13118
G01 X-97.75020 Y48.10339
G01 X-97.70139 Y48.05724
G01 X-97.66100 Y48.00354
G01 X-97.61391 Y47.92856
G01 X-97.57502 Y47.84789
G01 X-97.55511 Y47.76059
G01 X-97.54518 Y47.67258
G01 X-97.54512 Y47.58297
G01 X-97.56511 Y47.49559
G01 X-97.59438 Y47.41200
G01 X-97.63321 Y47.33131
G01 X-97.68907 Y47.26130
G01 X-97.75168 Y47.19869
G01 X-97.82171 Y47.14286
G01 X-97.90885 Y47.08810
G01 X-97.98957 Y47.04921
G01 X-98.07314 Y47.01998
G01 X-98.11015 Y47.01155
G01 X-98.21985 Y46.97314
G01 X-98.29625 Y46.92513
G01 X-98.36003 Y46.86133
G01 X-98.40809 Y46.78488
G01 X-98.44649 Y46.67522
G01 X-98.45490 Y46.63827
G01 X-98.48411 Y46.55468
G01 X-98.52300 Y46.47390
G01 X-98.64924 Y46.27302
G01 X-98.76623 Y46.03011
G01 X-98.85528 Y45.77561
G01 X-98.91528 Y45.51277
G01 X-98.94543 Y45.24482
G01 X-98.94543 Y44.97523
G01 X-98.91528 Y44.70728
G01 X-98.85528 Y44.44444
G01 X-98.76623 Y44.18994
G01 X-98.64924 Y43.94704
G01 X-98.52300 Y43.74615
G01 X-98.48411 Y43.66537
G01 X-98.45490 Y43.58178
G01 X-98.44649 Y43.54483
G01 X-98.40809 Y43.43515
G01 X-98.36008 Y43.35872
G01 X-98.29625 Y43.29492
G01 X-98.21988 Y43.24691
G01 X-98.12866 Y43.21501
G01 X-98.04794 Y43.17612
G01 X-97.97296 Y43.12900
G01 X-97.90293 Y43.07317
G01 X-96.44518 Y41.61542
G01 X-96.41531 Y41.58197
G01 X-96.38752 Y41.54712
G01 X-96.35016 Y41.49124
G01 X-96.32272 Y41.42987
G01 X-96.29346 Y41.34628
G01 X-96.27352 Y41.25895
G01 X-96.27347 Y41.16939
G01 X-96.28341 Y41.08141
G01 X-96.30332 Y40.99403
G01 X-96.34221 Y40.91328
G01 X-96.38935 Y40.83828
G01 X-96.44518 Y40.76830
G01 X-97.12605 Y40.08745
G01 X-97.19605 Y40.03163
G01 X-97.27106 Y39.98451
G01 X-97.35170 Y39.94565
G01 X-97.39882 Y39.92916
G01 X-97.42684 Y39.91153
G01 X-97.47525 Y39.88113
G01 X-97.53908 Y39.81733
G01 X-97.58709 Y39.74090
G01 X-97.61691 Y39.65571
G01 X-97.62465 Y39.58692
G01 X-97.62676 Y39.56576
G01 X-97.63128 Y39.54306
G01 X-97.63001 Y39.54285
G01 X-97.63913 Y39.48527
G01 X-97.65381 Y39.42418
G01 X-97.67728 Y39.35190
G01 X-97.69946 Y39.21192
G01 X-97.69946 Y39.07013
G01 X-97.67728 Y38.93015
G01 X-97.65381 Y38.85787
G01 X-97.63946 Y38.79884
G01 X-97.63001 Y38.74128
G01 X-97.62597 Y38.70752
G01 X-97.62580 Y38.70529
G01 X-97.61691 Y38.62637
G01 X-97.58709 Y38.54115
G01 X-97.53908 Y38.46472
G01 X-97.47525 Y38.40092
G01 X-97.39885 Y38.35291
G01 X-97.31404 Y38.32325
G01 X-97.21945 Y38.31278
G01 X-97.20098 Y38.30892
G01 X-97.20080 Y38.30999
G01 X-97.14322 Y38.30087
G01 X-97.08211 Y38.28619
G01 X-97.00985 Y38.26269
G01 X-96.86984 Y38.24054
G01 X-96.72808 Y38.24054
G01 X-96.58810 Y38.26269
G01 X-96.51582 Y38.28619
G01 X-96.45679 Y38.30054
G01 X-96.39923 Y38.30996
G01 X-96.36547 Y38.31403
G01 X-96.36324 Y38.31418
G01 X-96.28432 Y38.32309
G01 X-96.19908 Y38.35291
G01 X-96.12267 Y38.40092
G01 X-96.05884 Y38.46472
G01 X-96.01084 Y38.54118
G01 X-95.99435 Y38.58830
G01 X-95.95549 Y38.66894
G01 X-95.90837 Y38.74392
G01 X-95.85255 Y38.81395
G01 X-95.17170 Y39.49480
G01 X-95.13825 Y39.52469
G01 X-95.10340 Y39.55248
G01 X-95.04752 Y39.58982
G01 X-94.98615 Y39.61728
G01 X-94.90256 Y39.64654
G01 X-94.81526 Y39.66648
G01 X-94.72567 Y39.66650
G01 X-94.63766 Y39.65659
G01 X-94.55031 Y39.63666
G01 X-94.46959 Y39.59777
G01 X-94.39461 Y39.55065
G01 X-94.32458 Y39.49482
G01 X-93.70205 Y38.87229
G01 X-93.49126 Y38.70417
G01 X-93.26296 Y38.56074
G01 X-93.02006 Y38.44377
G01 X-92.76556 Y38.35472
G01 X-92.50272 Y38.29472
G01 X-92.23477 Y38.26455
G01 X-90.27445 Y38.26455
G01 X-90.25609 Y38.26412
G01 X-90.23782 Y38.26328
G01 X-90.13168 Y38.24382
G01 X-90.04753 Y38.21626
G01 X-89.96617 Y38.17910
G01 X-89.89510 Y38.12477
G01 X-89.83120 Y38.06346
G01 X-89.77387 Y37.99452
G01 X-89.73333 Y37.91456
G01 X-89.70239 Y37.83158
G01 X-89.68070 Y37.74474
G01 X-89.67887 Y37.65525
G01 X-89.68697 Y37.56706
G01 X-89.70511 Y37.47928
G01 X-89.74235 Y37.39777
G01 X-89.78794 Y37.32183
G01 X-89.84232 Y37.25068
G01 X-89.91121 Y37.19343
G01 X-89.98522 Y37.14479
G01 X-90.06510 Y37.10428
G01 X-90.22634 Y37.04415
G01 X-90.42721 Y36.93448
G01 X-90.61042 Y36.79732
G01 X-90.77227 Y36.63547
G01 X-90.90943 Y36.45226
G01 X-90.91882 Y36.43504
G01 X-90.91331 Y36.43504
G01 X-90.91052 Y36.44024
G01 X-90.86696 Y36.50545
G01 X-90.71773 Y36.68731
G01 X-90.66228 Y36.74276
G01 X-90.48042 Y36.89198
G01 X-90.41522 Y36.93554
G01 X-90.20778 Y37.04644
G01 X-90.13531 Y37.07644
G01 X-89.91022 Y37.14474
G01 X-89.83330 Y37.16003
G01 X-89.59919 Y37.18309
G01 X-89.52078 Y37.18309
G01 X-89.28667 Y37.16003
G01 X-89.20976 Y37.14474
G01 X-88.98466 Y37.07644
G01 X-88.91220 Y37.04644
G01 X-88.70476 Y36.93554
G01 X-88.63955 Y36.89198
G01 X-88.45769 Y36.74276
G01 X-88.40224 Y36.68731
G01 X-88.25302 Y36.50545
G01 X-88.20946 Y36.44024
G01 X-88.20666 Y36.43504
G01 X-88.20113 Y36.43504
G01 X-88.21052 Y36.45226
G01 X-88.34768 Y36.63547
G01 X-88.50953 Y36.79732
G01 X-88.69274 Y36.93448
G01 X-88.89361 Y37.04415
G01 X-89.05484 Y37.10428
G01 X-89.07181 Y37.11106
G01 X-89.08863 Y37.11822
G01 X-89.18126 Y37.17349
G01 X-89.25050 Y37.22871
G01 X-89.31385 Y37.29206
G01 X-89.36150 Y37.36790
G01 X-89.39993 Y37.44771
G01 X-89.42952 Y37.53224
G01 X-89.43955 Y37.62124
G01 X-89.43955 Y37.70979
G01 X-89.42952 Y37.79881
G01 X-89.39993 Y37.88334
G01 X-89.38578 Y37.91276
G01 X-89.36150 Y37.96315
G01 X-89.31385 Y38.03900
G01 X-89.25050 Y38.10234
G01 X-89.18126 Y38.15756
G01 X-89.10542 Y38.20521
G01 X-89.02088 Y38.23480
G01 X-88.93452 Y38.25451
G01 X-88.84552 Y38.26455
G01 X-80.29141 Y38.26455
G01 X-80.26863 Y38.26389
G01 X-80.24635 Y38.26262
G01 X-80.13708 Y38.24085
G01 X-80.05349 Y38.21161
G01 X-79.97272 Y38.17273
G01 X-79.90264 Y38.11682
G01 X-79.84003 Y38.05418
G01 X-79.78423 Y37.98418
G01 X-79.74539 Y37.90354
G01 X-79.71613 Y37.81995
G01 X-79.71450 Y37.81281
G01 X-79.69619 Y37.73265
G01 X-79.69616 Y37.64306
G01 X-79.70607 Y37.55505
G01 X-79.72601 Y37.46770
G01 X-79.76490 Y37.38698
G01 X-79.81201 Y37.31200
G01 X-79.86784 Y37.24197
G01 X-79.92271 Y37.18710
G01 X-80.09083 Y36.97631
G01 X-80.23426 Y36.74802
G01 X-80.35123 Y36.50511
G01 X-80.44028 Y36.25061
G01 X-80.50028 Y35.98777
G01 X-80.53045 Y35.71982
G01 X-80.53045 Y35.45023
G01 X-80.50028 Y35.18228
G01 X-80.44028 Y34.91944
G01 X-80.35123 Y34.66494
G01 X-80.23426 Y34.42204
G01 X-80.09083 Y34.19374
G01 X-79.92271 Y33.98295
G01 X-74.65205 Y28.71229
G01 X-74.44126 Y28.54417
G01 X-74.21296 Y28.40074
G01 X-73.97006 Y28.28377
G01 X-73.71556 Y28.19472
G01 X-73.45272 Y28.13472
G01 X-73.18477 Y28.10455
G01 X-67.09949 Y28.10455
G01 X-67.05458 Y28.10201
G01 X-67.01029 Y28.09700
G01 X-66.94437 Y28.08387
G01 X-66.88158 Y28.05989
G01 X-66.80180 Y28.02146
G01 X-66.72598 Y27.97381
G01 X-66.66266 Y27.91049
G01 X-66.60744 Y27.84125
G01 X-66.55979 Y27.76543
G01 X-66.53023 Y27.68090
G01 X-66.51052 Y27.59457
G01 X-66.50046 Y27.50551
G01 X-66.50046 Y21.82861
G01 X-66.50338 Y21.78043
G01 X-66.50914 Y21.73293
G01 X-66.52329 Y21.66557
G01 X-66.54877 Y21.60164
G01 X-66.58849 Y21.52252
G01 X-66.63739 Y21.44749
G01 X-66.70175 Y21.38521
G01 X-66.77191 Y21.33113
G01 X-66.84856 Y21.28470
G01 X-66.93363 Y21.25653
G01 X-67.02029 Y21.23827
G01 X-67.10714 Y21.22968
G01 X-67.19378 Y21.24015
G01 X-67.27455 Y21.25902
G01 X-67.32474 Y21.27568
G01 X-67.32507 Y21.27474
G01 X-67.33782 Y21.27936
G01 X-67.35700 Y21.28691
G01 X-67.37523 Y21.29460
G01 X-67.37592 Y21.29491
G01 X-67.48956 Y21.33466
G01 X-67.49251 Y21.33570
G01 X-67.49484 Y21.33654
G01 X-67.49654 Y21.33717
G01 X-67.61493 Y21.38025
G01 X-67.62517 Y21.38322
G01 X-67.75380 Y21.41259
G01 X-67.75674 Y21.41327
G01 X-67.88806 Y21.44431
G01 X-68.02517 Y21.45973
G01 X-68.02763 Y21.46003
G01 X-68.16014 Y21.47550
G01 X-68.43977 Y21.47550
G01 X-68.57315 Y21.45993
G01 X-68.57482 Y21.45973
G01 X-68.71254 Y21.44424
G01 X-68.84132 Y21.41370
G01 X-68.84579 Y21.41269
G01 X-68.97678 Y21.38264
G01 X-68.98498 Y21.38025
G01 X-69.10335 Y21.33717
G01 X-69.10508 Y21.33654
G01 X-69.10741 Y21.33570
G01 X-69.22415 Y21.29486
G01 X-69.22461 Y21.29466
G01 X-69.24290 Y21.28693
G01 X-69.24998 Y21.28414
G01 X-69.35494 Y21.23141
G01 X-69.35930 Y21.22925
G01 X-69.36228 Y21.22780
G01 X-69.36388 Y21.22704
G01 X-69.46512 Y21.17827
G01 X-69.47228 Y21.17401
G01 X-69.48884 Y21.16468
G01 X-69.50149 Y21.15795
G01 X-69.59306 Y21.09773
G01 X-69.59618 Y21.09570
G01 X-69.59961 Y21.09349
G01 X-69.60335 Y21.09112
G01 X-69.63291 Y21.07253
G01 X-69.69179 Y21.03552
G01 X-69.70393 Y21.02630
G01 X-69.71864 Y21.01564
G01 X-69.73352 Y21.00535
G01 X-69.73581 Y21.00383
G01 X-69.81440 Y20.93791
G01 X-69.81785 Y20.93504
G01 X-69.82166 Y20.93192
G01 X-69.82593 Y20.92846
G01 X-69.90197 Y20.86783
G01 X-69.90457 Y20.86524
G01 X-69.91765 Y20.85272
G01 X-69.93045 Y20.84101
G01 X-69.94328 Y20.82976
G01 X-69.95008 Y20.82407
G01 X-70.01610 Y20.75407
G01 X-70.02075 Y20.74924
G01 X-70.02478 Y20.74510
G01 X-70.02826 Y20.74157
G01 X-72.92884 Y17.84097
G01 X-72.98023 Y17.79758
G01 X-73.03461 Y17.75900
G01 X-73.10268 Y17.72011
G01 X-73.17703 Y17.69527
G01 X-73.26336 Y17.67556
G01 X-73.35241 Y17.66550
G01 X-86.56049 Y17.66550
G01 X-86.60540 Y17.66804
G01 X-86.64967 Y17.67305
G01 X-86.71556 Y17.68618
G01 X-86.77829 Y17.71013
G01 X-86.85810 Y17.74856
G01 X-86.93394 Y17.79621
G01 X-86.99729 Y17.85956
G01 X-87.05251 Y17.92880
G01 X-87.10016 Y18.00462
G01 X-87.12973 Y18.08915
G01 X-87.14944 Y18.17548
G01 X-87.15950 Y18.26451
G01 X-87.15950 Y19.62483
G01 X-87.18965 Y19.89273
G01 X-87.20171 Y19.94548
G01 X-87.24967 Y20.15562
G01 X-87.33872 Y20.41010
G01 X-87.45569 Y20.65303
G01 X-87.59915 Y20.88132
G01 X-87.76724 Y21.09209
G01 X-92.62291 Y25.94776
G01 X-92.83368 Y26.11585
G01 X-93.06197 Y26.25931
G01 X-93.30487 Y26.37628
G01 X-93.55938 Y26.46533
G01 X-93.82225 Y26.52535
G01 X-94.04833 Y26.55080
G01 X-94.09014 Y26.55550
G01 X-95.42649 Y26.55550
G01 X-95.47139 Y26.55804
G01 X-95.51566 Y26.56305
G01 X-95.58155 Y26.57618
G01 X-95.64429 Y26.60013
G01 X-95.72410 Y26.63856
G01 X-95.79994 Y26.68621
G01 X-95.86329 Y26.74956
G01 X-95.91851 Y26.81880
G01 X-95.96616 Y26.89462
G01 X-95.99573 Y26.97915
G01 X-96.01544 Y27.06548
G01 X-96.02549 Y27.15451
G01 X-96.02549 Y29.94092
G01 X-96.04764 Y30.08090
G01 X-96.07114 Y30.15318
G01 X-96.08549 Y30.21221
G01 X-96.09491 Y30.26977
G01 X-96.09898 Y30.30353
G01 X-96.09913 Y30.30576
G01 X-96.10804 Y30.38471
G01 X-96.13786 Y30.46990
G01 X-96.18587 Y30.54633
G01 X-96.24967 Y30.61013
G01 X-96.32610 Y30.65814
G01 X-96.41086 Y30.68780
G01 X-96.50550 Y30.69827
G01 X-96.52397 Y30.70213
G01 X-96.52415 Y30.70106
G01 X-96.58173 Y30.71018
G01 X-96.64279 Y30.72486
G01 X-96.71508 Y30.74836
G01 X-96.85511 Y30.77051
G01 X-96.99684 Y30.77051
G01 X-97.05318 Y30.76159
G01 X-97.13685 Y30.74836
G01 X-97.20913 Y30.72486
G01 X-97.26816 Y30.71051
G01 X-97.32572 Y30.70109
G01 X-97.35948 Y30.69702
G01 X-97.36171 Y30.69687
G01 X-97.44063 Y30.68796
G01 X-97.52585 Y30.65814
G01 X-97.60228 Y30.61013
G01 X-97.66608 Y30.54633
G01 X-97.71409 Y30.46990
G01 X-97.74375 Y30.38511
G01 X-97.75422 Y30.29050
G01 X-97.75808 Y30.27203
G01 X-97.75701 Y30.27185
G01 X-97.76613 Y30.21427
G01 X-97.78079 Y30.15318
G01 X-97.80431 Y30.08090
G01 X-97.82643 Y29.94092
G01 X-97.82643 Y26.49188
G01 X-97.83649 Y26.40287
G01 X-97.85620 Y26.31651
G01 X-97.88579 Y26.23198
G01 X-97.93344 Y26.15614
G01 X-97.98866 Y26.08690
G01 X-98.05201 Y26.02355
G01 X-98.14705 Y25.94776
G01 X-98.33771 Y25.75710
G01 X-98.50583 Y25.54631
G01 X-98.64924 Y25.31802
G01 X-98.76623 Y25.07511
G01 X-98.85528 Y24.82061
G01 X-98.91528 Y24.55777
G01 X-98.94543 Y24.28982
G01 X-98.94543 Y24.02023
G01 X-98.91528 Y23.75228
G01 X-98.85528 Y23.48944
G01 X-98.76623 Y23.23494
G01 X-98.64924 Y22.99204
G01 X-98.50583 Y22.76374
G01 X-98.33771 Y22.55295
G01 X-98.14705 Y22.36229
G01 X-97.93626 Y22.19417
G01 X-97.82173 Y22.12221
G01 X-97.78503 Y22.09618
G01 X-97.75020 Y22.06839
G01 X-97.70139 Y22.02224
G01 X-97.66100 Y21.96854
G01 X-97.61391 Y21.89356
G01 X-97.57502 Y21.81289
G01 X-97.55511 Y21.72559
G01 X-97.54518 Y21.63758
G01 X-97.54512 Y21.54797
G01 X-97.56511 Y21.46059
G01 X-97.59438 Y21.37700
G01 X-97.63321 Y21.29631
G01 X-97.68907 Y21.22630
G01 X-97.75168 Y21.16369
G01 X-97.82171 Y21.10786
G01 X-97.90885 Y21.05310
G01 X-97.98957 Y21.01421
G01 X-98.07314 Y20.98498
G01 X-98.11015 Y20.97655
G01 X-98.21985 Y20.93814
G01 X-98.29625 Y20.89013
G01 X-98.36003 Y20.82633
G01 X-98.40809 Y20.74988
G01 X-98.44649 Y20.64022
G01 X-98.45490 Y20.60327
G01 X-98.48411 Y20.51968
G01 X-98.52300 Y20.43890
G01 X-98.64924 Y20.23802
G01 X-98.76623 Y19.99511
G01 X-98.85528 Y19.74061
G01 X-98.91528 Y19.47777
G01 X-98.94543 Y19.20982
G01 X-98.94543 Y15.76523
G01 X-98.91528 Y15.49728
G01 X-98.85528 Y15.23444
G01 X-98.76623 Y14.97994
G01 X-98.64924 Y14.73704
G01 X-98.50583 Y14.50874
G01 X-98.33771 Y14.29795
G01 X-97.95406 Y13.91430
G01 X-97.92686 Y13.88423
G01 X-97.90154 Y13.85314
G01 X-97.86471 Y13.79965
G01 X-97.83707 Y13.74092
G01 X-97.80593 Y13.65802
G01 X-97.78406 Y13.57120
G01 X-97.78206 Y13.48167
G01 X-97.78996 Y13.39345
G01 X-97.79966 Y13.34621
G01 X-97.82643 Y13.17692
G01 X-97.82643 Y13.03513
G01 X-97.80431 Y12.89515
G01 X-97.78079 Y12.82287
G01 X-97.76644 Y12.76384
G01 X-97.75704 Y12.70628
G01 X-97.75297 Y12.67252
G01 X-97.75282 Y12.67029
G01 X-97.74391 Y12.59137
G01 X-97.71409 Y12.50615
G01 X-97.66608 Y12.42972
G01 X-97.60228 Y12.36592
G01 X-97.52585 Y12.31791
G01 X-97.44106 Y12.28825
G01 X-97.34642 Y12.27778
G01 X-97.32798 Y12.27392
G01 X-97.32780 Y12.27499
G01 X-97.27022 Y12.26587
G01 X-97.20913 Y12.25119
G01 X-97.13685 Y12.22769
G01 X-96.99687 Y12.20554
G01 X-96.85508 Y12.20554
G01 X-96.70959 Y12.22856
G01 X-96.68729 Y12.23460
G01 X-96.64810 Y12.24309
G01 X-96.58366 Y12.25162
G01 X-96.51866 Y12.24959
G01 X-96.43065 Y12.23966
G01 X-96.34335 Y12.21972
G01 X-96.26268 Y12.18086
G01 X-96.18772 Y12.13374
G01 X-96.11770 Y12.07791
G01 X-92.43205 Y8.39229
G01 X-92.22126 Y8.22417
G01 X-91.99296 Y8.08074
G01 X-91.75006 Y7.96377
G01 X-91.49556 Y7.87472
G01 X-91.23272 Y7.81472
G01 X-90.96477 Y7.78455
G01 X-75.38169 Y7.78455
G01 X-75.35891 Y7.78389
G01 X-75.33664 Y7.78262
G01 X-75.22736 Y7.76085
G01 X-75.14377 Y7.73161
G01 X-75.06303 Y7.69273
G01 X-74.99297 Y7.63687
G01 X-74.93034 Y7.57424
G01 X-74.87448 Y7.50418
G01 X-74.83559 Y7.42344
G01 X-74.80636 Y7.33984
G01 X-74.78647 Y7.25270
G01 X-74.78530 Y7.24236
G01 X-74.72528 Y6.97944
G01 X-74.63623 Y6.72494
G01 X-74.51926 Y6.48204
G01 X-74.37580 Y6.25371
G01 X-74.29496 Y6.15232
G01 X-74.20771 Y6.04295
G01 X-69.31285 Y1.14809
G01 X-69.29735 Y1.13173
G01 X-69.28249 Y1.11509
G01 X-69.22044 Y1.02215
G01 X-69.18201 Y0.94235
G01 X-69.15242 Y0.85784
G01 X-69.14239 Y0.76879
G01 X-69.14239 Y0.68022
G01 X-69.15242 Y0.59119
G01 X-69.18204 Y0.50663
G01 X-69.22047 Y0.42685
G01 X-69.26812 Y0.35103
G01 X-69.33144 Y0.28771
G01 X-69.40068 Y0.23249
G01 X-69.47650 Y0.18484
G01 X-69.56103 Y0.15528
G01 X-69.64737 Y0.13557
G01 X-69.73642 Y0.12551
G01 X-100.29046 Y0.12551
G01 X-100.33537 Y0.12805
G01 X-100.37966 Y0.13305
G01 X-100.44558 Y0.14618
G01 X-100.50834 Y0.17016
G01 X-100.58815 Y0.20859
G01 X-100.66394 Y0.25624
G01 X-100.72729 Y0.31956
G01 X-100.78251 Y0.38880
G01 X-100.83016 Y0.46462
G01 X-100.85970 Y0.54915
G01 X-100.87941 Y0.63549
G01 X-100.88947 Y0.72452
G01 X-100.88947 Y78.06551
G01 X-100.88695 Y78.11042
G01 X-100.88195 Y78.15471
G01 X-100.86879 Y78.22063
G01 X-100.84484 Y78.28342
G01 X-100.80641 Y78.36320
G01 X-100.75876 Y78.43902
G01 X-100.69541 Y78.50234
G01 X-100.62620 Y78.55756
G01 X-100.55035 Y78.60521
G01 X-100.46585 Y78.63477
G01 X-100.37951 Y78.65448
G01 X-100.29046 Y78.66454
G01 X-38.32398 Y78.66454
G01 X-38.27905 Y78.66200
G01 X-38.23478 Y78.65700
G01 X-38.16889 Y78.64387
G01 X-38.10615 Y78.61992
G01 X-38.02635 Y78.58148
G01 X-37.95050 Y78.53383
G01 X-37.88715 Y78.47049
G01 X-37.83193 Y78.40125
G01 X-37.78426 Y78.32538
G01 X-37.75469 Y78.24077
G01 X-37.73501 Y78.15443
G01 X-37.72498 Y78.06551
G01 X-37.72498 Y69.99484
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-42.19317 Y70.93001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.19317 Y70.93001
G01 X-42.21930 Y70.85539
G01 X-42.26726 Y70.77906
G01 X-42.29911 Y70.74721
G01 X-42.35976 Y70.69743
G01 X-42.42890 Y70.66047
G01 X-42.48196 Y70.64437
G01 X-42.48196 Y70.64122
G01 X-42.40734 Y70.66735
G01 X-42.33101 Y70.71531
G01 X-42.29911 Y70.74721
G01 X-42.24940 Y70.80779
G01 X-42.21244 Y70.87693
G01 X-42.19634 Y70.93001
G01 X-42.19317 Y70.93001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-42.19317 Y72.63004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.19317 Y72.63004
G01 X-42.21930 Y72.70466
G01 X-42.26726 Y72.78099
G01 X-42.29913 Y72.81287
G01 X-42.35976 Y72.86260
G01 X-42.42890 Y72.89956
G01 X-42.48196 Y72.91566
G01 X-42.48196 Y72.91883
G01 X-42.40734 Y72.89270
G01 X-42.33101 Y72.84474
G01 X-42.29913 Y72.81287
G01 X-42.24940 Y72.75224
G01 X-42.21244 Y72.68310
G01 X-42.19634 Y72.63004
G01 X-42.19317 Y72.63004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-44.18199 Y70.64122 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.18199 Y70.64122
G01 X-44.25661 Y70.66735
G01 X-44.33294 Y70.71531
G01 X-44.36464 Y70.74703
G01 X-44.30421 Y70.69743
G01 X-44.23507 Y70.66047
G01 X-44.18199 Y70.64437
G01 X-44.18199 Y70.64122
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-44.36497 Y70.74736 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.36497 Y70.74736
G01 X-44.41457 Y70.80779
G01 X-44.45153 Y70.87693
G01 X-44.46763 Y70.93001
G01 X-44.47078 Y70.93001
G01 X-44.44465 Y70.85539
G01 X-44.39669 Y70.77906
G01 X-44.36497 Y70.74736
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-44.18199 Y72.91566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.18199 Y72.91566
G01 X-44.23507 Y72.89956
G01 X-44.30421 Y72.86260
G01 X-44.36479 Y72.81289
G01 X-44.41457 Y72.75224
G01 X-44.45153 Y72.68310
G01 X-44.46763 Y72.63004
G01 X-44.47078 Y72.63004
G01 X-44.44465 Y72.70466
G01 X-44.39669 Y72.78099
G01 X-44.33294 Y72.84474
G01 X-44.25661 Y72.89270
G01 X-44.18199 Y72.91883
G01 X-44.18199 Y72.91566
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-48.31944 Y73.58264 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.31944 Y73.58264
G01 X-48.42719 Y73.61924
G01 X-48.67144 Y73.66783
G01 X-48.91997 Y73.68411
G01 X-49.16851 Y73.66783
G01 X-49.41276 Y73.61924
G01 X-49.52051 Y73.58264
G01 X-49.51525 Y73.57738
G01 X-49.32874 Y73.63397
G01 X-49.25183 Y73.64926
G01 X-48.95919 Y73.67809
G01 X-48.88078 Y73.67809
G01 X-48.58815 Y73.64926
G01 X-48.51124 Y73.63397
G01 X-48.32470 Y73.57738
G01 X-48.31944 Y73.58264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-47.01589 Y71.78003 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.01589 Y71.78003
G01 X-47.03217 Y72.02856
G01 X-47.08076 Y72.27281
G01 X-47.11736 Y72.38056
G01 X-47.12262 Y72.37530
G01 X-47.06603 Y72.18876
G01 X-47.05074 Y72.11185
G01 X-47.02191 Y71.81922
G01 X-47.02191 Y71.74081
G01 X-47.05074 Y71.44817
G01 X-47.06603 Y71.37126
G01 X-47.12262 Y71.18475
G01 X-47.11736 Y71.17949
G01 X-47.08076 Y71.28724
G01 X-47.03217 Y71.53149
G01 X-47.01589 Y71.78003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-48.31944 Y69.97739 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.31944 Y69.97739
G01 X-48.42716 Y69.94081
G01 X-48.67144 Y69.89222
G01 X-48.91997 Y69.87594
G01 X-49.16851 Y69.89222
G01 X-49.41276 Y69.94081
G01 X-49.52051 Y69.97741
G01 X-49.51527 Y69.98265
G01 X-49.32874 Y69.92605
G01 X-49.25183 Y69.91076
G01 X-48.95919 Y69.88193
G01 X-48.88078 Y69.88193
G01 X-48.58815 Y69.91076
G01 X-48.51124 Y69.92605
G01 X-48.32467 Y69.98265
G01 X-48.31944 Y69.97739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-50.71735 Y71.18473 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.71735 Y71.18473
G01 X-50.72259 Y71.17949
G01 X-50.75919 Y71.28724
G01 X-50.80778 Y71.53149
G01 X-50.82406 Y71.78003
G01 X-50.80778 Y72.02856
G01 X-50.75919 Y72.27281
G01 X-50.72259 Y72.38056
G01 X-50.71735 Y72.37533
G01 X-50.77395 Y72.18876
G01 X-50.78924 Y72.11185
G01 X-50.81807 Y71.81922
G01 X-50.81807 Y71.74081
G01 X-50.78924 Y71.44817
G01 X-50.77395 Y71.37126
G01 X-50.71735 Y71.18473
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.09998 Y70.28000 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.09998 Y70.28000
G01 X-52.09998 Y70.25760
G01 X-52.10755 Y70.19047
G01 X-52.13732 Y70.10538
G01 X-52.18527 Y70.02905
G01 X-52.24900 Y69.96532
G01 X-52.32530 Y69.91737
G01 X-52.41042 Y69.88760
G01 X-52.47755 Y69.88003
G01 X-52.49995 Y69.88003
G01 X-52.42195 Y69.88770
G01 X-52.34692 Y69.91046
G01 X-52.27775 Y69.94742
G01 X-52.21715 Y69.99717
G01 X-52.16739 Y70.05778
G01 X-52.13043 Y70.12694
G01 X-52.10767 Y70.20197
G01 X-52.09998 Y70.28000
G01 X-52.09998 Y70.93001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.09998 Y72.63004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.09998 Y72.63004
G01 X-52.09998 Y73.30245
G01 X-52.10755 Y73.36958
G01 X-52.13732 Y73.45467
G01 X-52.18527 Y73.53100
G01 X-52.24900 Y73.59473
G01 X-52.32530 Y73.64268
G01 X-52.41042 Y73.67245
G01 X-52.47755 Y73.68002
G01 X-53.14996 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.09998 Y73.28002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.09998 Y73.28002
G01 X-52.10767 Y73.35805
G01 X-52.13043 Y73.43308
G01 X-52.16739 Y73.50225
G01 X-52.21715 Y73.56285
G01 X-52.27775 Y73.61261
G01 X-52.34692 Y73.64957
G01 X-52.42195 Y73.67233
G01 X-52.49998 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.84999 Y73.68002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.84999 Y73.68002
G01 X-55.52240 Y73.68002
G01 X-55.58953 Y73.67245
G01 X-55.67462 Y73.64268
G01 X-55.75095 Y73.59473
G01 X-55.81468 Y73.53100
G01 X-55.86263 Y73.45470
G01 X-55.89240 Y73.36958
G01 X-55.89997 Y73.30245
G01 X-55.89997 Y73.28005
G01 X-55.89230 Y73.35805
G01 X-55.86954 Y73.43308
G01 X-55.83258 Y73.50225
G01 X-55.78283 Y73.56285
G01 X-55.72222 Y73.61261
G01 X-55.65306 Y73.64957
G01 X-55.57803 Y73.67233
G01 X-55.50000 Y73.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-55.78293 Y69.99730 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.78293 Y69.99730
G01 X-55.81468 Y70.02905
G01 X-55.86263 Y70.10535
G01 X-55.89240 Y70.19047
G01 X-55.89997 Y70.25760
G01 X-55.89997 Y70.27998
G01 X-55.89230 Y70.20197
G01 X-55.86954 Y70.12694
G01 X-55.83258 Y70.05778
G01 X-55.78293 Y69.99730
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-55.50002 Y69.88003 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.50002 Y69.88003
G01 X-55.52240 Y69.88003
G01 X-55.58953 Y69.88760
G01 X-55.67462 Y69.91737
G01 X-55.75095 Y69.96532
G01 X-55.78270 Y69.99707
G01 X-55.72222 Y69.94742
G01 X-55.65306 Y69.91046
G01 X-55.57803 Y69.88770
G01 X-55.50002 Y69.88003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y65.64732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y65.64732
G01 X-54.86998 Y65.65248
G01 X-54.94506 Y65.59485
G01 X-55.07480 Y65.46510
G01 X-55.18651 Y65.31951
G01 X-55.27828 Y65.16056
G01 X-55.34851 Y64.99104
G01 X-55.37556 Y64.89005
G01 X-55.37178 Y64.89005
G01 X-55.32664 Y65.03881
G01 X-55.29664 Y65.11126
G01 X-55.20421 Y65.28415
G01 X-55.16065 Y65.34933
G01 X-55.03629 Y65.50087
G01 X-54.98085 Y65.55631
G01 X-54.86998 Y65.64732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y64.89005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y64.89005
G01 X-52.66820 Y64.89005
G01 X-52.71334 Y65.03881
G01 X-52.74334 Y65.11126
G01 X-52.83574 Y65.28415
G01 X-52.87930 Y65.34933
G01 X-53.00368 Y65.50087
G01 X-53.05913 Y65.55631
G01 X-53.16995 Y65.64730
G01 X-53.16995 Y65.65245
G01 X-53.09492 Y65.59485
G01 X-52.96515 Y65.46508
G01 X-52.85339 Y65.31948
G01 X-52.76165 Y65.16056
G01 X-52.69144 Y64.99101
G01 X-52.66437 Y64.89005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y63.19002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y63.19002
G01 X-52.66818 Y63.19002
G01 X-52.71334 Y63.04121
G01 X-52.74334 Y62.96877
G01 X-52.83574 Y62.79589
G01 X-52.87930 Y62.73069
G01 X-53.00368 Y62.57915
G01 X-53.05913 Y62.52371
G01 X-53.16995 Y62.43272
G01 X-53.16995 Y62.42759
G01 X-53.09492 Y62.48520
G01 X-52.96515 Y62.61494
G01 X-52.85339 Y62.76059
G01 X-52.76165 Y62.91949
G01 X-52.69144 Y63.08903
G01 X-52.66437 Y63.19002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y62.42757 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y62.42757
G01 X-54.86998 Y62.43270
G01 X-54.98085 Y62.52371
G01 X-55.03629 Y62.57915
G01 X-55.16065 Y62.73069
G01 X-55.20421 Y62.79589
G01 X-55.29664 Y62.96877
G01 X-55.32664 Y63.04121
G01 X-55.37178 Y63.19002
G01 X-55.37556 Y63.19002
G01 X-55.34851 Y63.08903
G01 X-55.27828 Y62.91949
G01 X-55.18651 Y62.76056
G01 X-55.07480 Y62.61494
G01 X-54.94506 Y62.48520
G01 X-54.86998 Y62.42757
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y58.14734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y58.14734
G01 X-54.86998 Y58.15247
G01 X-54.94506 Y58.09486
G01 X-55.07480 Y57.96509
G01 X-55.18651 Y57.81950
G01 X-55.27828 Y57.66055
G01 X-55.34851 Y57.49103
G01 X-55.37556 Y57.39004
G01 X-55.37178 Y57.39004
G01 X-55.32664 Y57.53880
G01 X-55.29664 Y57.61124
G01 X-55.20421 Y57.78414
G01 X-55.16065 Y57.84934
G01 X-55.03629 Y58.00088
G01 X-54.98085 Y58.05633
G01 X-54.86998 Y58.14734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y57.39004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y57.39004
G01 X-52.66820 Y57.39004
G01 X-52.71334 Y57.53880
G01 X-52.74334 Y57.61124
G01 X-52.83574 Y57.78414
G01 X-52.87930 Y57.84934
G01 X-53.00368 Y58.00088
G01 X-53.05913 Y58.05633
G01 X-53.16995 Y58.14729
G01 X-53.16995 Y58.15247
G01 X-53.09492 Y58.09486
G01 X-52.96515 Y57.96509
G01 X-52.85339 Y57.81947
G01 X-52.76165 Y57.66057
G01 X-52.69144 Y57.49100
G01 X-52.66437 Y57.39004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y55.69001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y55.69001
G01 X-52.66820 Y55.69001
G01 X-52.71334 Y55.54125
G01 X-52.74334 Y55.46878
G01 X-52.83574 Y55.29588
G01 X-52.87930 Y55.23068
G01 X-53.00368 Y55.07917
G01 X-53.05913 Y55.02370
G01 X-53.16995 Y54.93274
G01 X-53.16995 Y54.92758
G01 X-53.09492 Y54.98519
G01 X-52.96515 Y55.11496
G01 X-52.85339 Y55.26058
G01 X-52.76165 Y55.41948
G01 X-52.69144 Y55.58905
G01 X-52.66437 Y55.69001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y54.92758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y54.92758
G01 X-54.86998 Y54.93271
G01 X-54.98085 Y55.02370
G01 X-55.03629 Y55.07917
G01 X-55.16065 Y55.23068
G01 X-55.20421 Y55.29588
G01 X-55.29664 Y55.46878
G01 X-55.32664 Y55.54125
G01 X-55.37178 Y55.69001
G01 X-55.37556 Y55.69001
G01 X-55.34851 Y55.58902
G01 X-55.27828 Y55.41950
G01 X-55.18651 Y55.26058
G01 X-55.07480 Y55.11496
G01 X-54.94506 Y54.98519
G01 X-54.86998 Y54.92758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-58.35874 Y49.81588 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.35874 Y49.81588
G01 X-58.17650 Y49.76056
G01 X-58.10403 Y49.73054
G01 X-57.75826 Y49.54573
G01 X-57.69306 Y49.50217
G01 X-57.38999 Y49.25345
G01 X-57.33454 Y49.19800
G01 X-57.08582 Y48.89493
G01 X-57.04226 Y48.82973
G01 X-56.85745 Y48.48396
G01 X-56.82743 Y48.41149
G01 X-56.71361 Y48.03631
G01 X-56.69832 Y47.95942
G01 X-56.65989 Y47.56923
G01 X-56.65796 Y47.53001
G01 X-56.65796 Y35.60702
G01 X-56.65989 Y35.56783
G01 X-56.69832 Y35.17763
G01 X-56.71361 Y35.10075
G01 X-56.82743 Y34.72557
G01 X-56.85745 Y34.65310
G01 X-57.04226 Y34.30733
G01 X-57.08582 Y34.24213
G01 X-57.33454 Y33.93905
G01 X-57.36090 Y33.90997
G01 X-57.38292 Y33.88795
G01 X-57.41201 Y33.86158
G01 X-57.71508 Y33.61287
G01 X-57.78028 Y33.56931
G01 X-58.12605 Y33.38450
G01 X-58.19852 Y33.35447
G01 X-58.35973 Y33.30558
G01 X-58.57149 Y33.30558
G01 X-58.59326 Y33.30522
G01 X-58.63804 Y33.30383
G01 X-58.65828 Y33.30352
G01 X-59.03204 Y33.30352
G01 X-59.05224 Y33.30317
G01 X-59.08772 Y33.30190
G01 X-59.10791 Y33.30154
G01 X-59.48165 Y33.30154
G01 X-59.50189 Y33.30124
G01 X-59.54667 Y33.29984
G01 X-59.56844 Y33.29948
G01 X-59.78013 Y33.29948
G01 X-59.94144 Y33.25056
G01 X-60.01391 Y33.22054
G01 X-60.35968 Y33.03573
G01 X-60.42488 Y32.99217
G01 X-60.72795 Y32.74345
G01 X-60.78340 Y32.68800
G01 X-61.03212 Y32.38493
G01 X-61.07568 Y32.31973
G01 X-61.26049 Y31.97396
G01 X-61.29051 Y31.90149
G01 X-61.40433 Y31.52631
G01 X-61.41962 Y31.44942
G01 X-61.45805 Y31.05923
G01 X-61.45998 Y31.02001
G01 X-61.45998 Y19.29788
G01 X-61.47806 Y19.11422
G01 X-61.47806 Y19.03581
G01 X-61.43963 Y18.64561
G01 X-61.42434 Y18.56873
G01 X-61.31053 Y18.19354
G01 X-61.30555 Y18.18150
G01 X-61.28050 Y18.12108
G01 X-61.09569 Y17.77531
G01 X-61.05213 Y17.71011
G01 X-60.80342 Y17.40703
G01 X-60.74797 Y17.35158
G01 X-60.44489 Y17.10287
G01 X-60.37969 Y17.05931
G01 X-60.03392 Y16.87450
G01 X-59.96146 Y16.84447
G01 X-59.77913 Y16.78918
G01 X-59.56852 Y16.78918
G01 X-59.54459 Y16.78961
G01 X-59.50192 Y16.79106
G01 X-59.47964 Y16.79144
G01 X-59.10791 Y16.79144
G01 X-59.08572 Y16.79187
G01 X-59.05224 Y16.79319
G01 X-59.03004 Y16.79362
G01 X-58.65828 Y16.79362
G01 X-58.63601 Y16.79400
G01 X-58.59334 Y16.79545
G01 X-58.56941 Y16.79588
G01 X-58.35874 Y16.79588
G01 X-58.19852 Y16.84447
G01 X-58.12605 Y16.87450
G01 X-57.78028 Y17.05931
G01 X-57.71508 Y17.10287
G01 X-57.41201 Y17.35158
G01 X-57.38292 Y17.37795
G01 X-57.36291 Y17.39796
G01 X-57.33654 Y17.42705
G01 X-57.08783 Y17.73012
G01 X-57.04427 Y17.79532
G01 X-56.85946 Y18.14109
G01 X-56.82943 Y18.21356
G01 X-56.71562 Y18.58874
G01 X-56.70032 Y18.66563
G01 X-56.66189 Y19.05582
G01 X-56.65996 Y19.09502
G01 X-56.65996 Y31.02001
G01 X-56.66189 Y31.05923
G01 X-56.70032 Y31.44942
G01 X-56.71562 Y31.52631
G01 X-56.82943 Y31.90149
G01 X-56.85946 Y31.97396
G01 X-57.04427 Y32.31973
G01 X-57.08783 Y32.38493
G01 X-57.33654 Y32.68800
G01 X-57.39199 Y32.74345
G01 X-57.69506 Y32.99217
G01 X-57.76027 Y33.03573
G01 X-58.10604 Y33.22054
G01 X-58.17850 Y33.25056
G01 X-58.35973 Y33.30558
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-59.78013 Y33.29948 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.78013 Y33.29948
G01 X-59.96146 Y33.35447
G01 X-60.03392 Y33.38450
G01 X-60.37969 Y33.56931
G01 X-60.44489 Y33.61287
G01 X-60.74797 Y33.86158
G01 X-60.80342 Y33.91703
G01 X-61.05213 Y34.22011
G01 X-61.09569 Y34.28531
G01 X-61.28050 Y34.63108
G01 X-61.30555 Y34.69150
G01 X-61.31053 Y34.70354
G01 X-61.42434 Y35.07873
G01 X-61.43963 Y35.15561
G01 X-61.47806 Y35.54581
G01 X-61.47806 Y35.62422
G01 X-61.45797 Y35.82826
G01 X-61.45797 Y47.53001
G01 X-61.45604 Y47.56923
G01 X-61.41761 Y47.95942
G01 X-61.40232 Y48.03631
G01 X-61.28850 Y48.41149
G01 X-61.25848 Y48.48396
G01 X-61.07367 Y48.82973
G01 X-61.03011 Y48.89493
G01 X-60.78139 Y49.19800
G01 X-60.72595 Y49.25345
G01 X-60.42287 Y49.50217
G01 X-60.35767 Y49.54573
G01 X-60.24370 Y49.60664
G01 X-60.01190 Y49.73054
G01 X-59.93943 Y49.76056
G01 X-59.77913 Y49.80918
G01 X-59.96146 Y49.86447
G01 X-60.03392 Y49.89450
G01 X-60.37969 Y50.07931
G01 X-60.44489 Y50.12287
G01 X-60.74797 Y50.37158
G01 X-60.80342 Y50.42703
G01 X-61.05213 Y50.73011
G01 X-61.09569 Y50.79531
G01 X-61.28050 Y51.14108
G01 X-61.30555 Y51.20150
G01 X-61.31053 Y51.21354
G01 X-61.42434 Y51.58873
G01 X-61.43963 Y51.66561
G01 X-61.47806 Y52.05581
G01 X-61.47806 Y52.13422
G01 X-61.45998 Y52.31788
G01 X-61.45998 Y64.04001
G01 X-61.45805 Y64.07923
G01 X-61.41962 Y64.46942
G01 X-61.40433 Y64.54631
G01 X-61.29051 Y64.92149
G01 X-61.26049 Y64.99396
G01 X-61.12635 Y65.24494
G01 X-61.07568 Y65.33973
G01 X-61.03212 Y65.40493
G01 X-60.78340 Y65.70800
G01 X-60.72795 Y65.76345
G01 X-60.42488 Y66.01217
G01 X-60.35968 Y66.05573
G01 X-60.01391 Y66.24054
G01 X-59.94144 Y66.27056
G01 X-59.56626 Y66.38438
G01 X-59.48937 Y66.39967
G01 X-59.09918 Y66.43810
G01 X-59.02077 Y66.43810
G01 X-58.63057 Y66.39967
G01 X-58.55369 Y66.38438
G01 X-58.17850 Y66.27056
G01 X-58.10604 Y66.24054
G01 X-57.76027 Y66.05573
G01 X-57.69506 Y66.01217
G01 X-57.39199 Y65.76345
G01 X-57.33654 Y65.70800
G01 X-57.08783 Y65.40493
G01 X-57.04427 Y65.33973
G01 X-56.85946 Y64.99396
G01 X-56.82943 Y64.92149
G01 X-56.71562 Y64.54631
G01 X-56.70032 Y64.46942
G01 X-56.66189 Y64.07923
G01 X-56.65996 Y64.04001
G01 X-56.65996 Y52.11502
G01 X-56.66189 Y52.07582
G01 X-56.70032 Y51.68563
G01 X-56.71562 Y51.60874
G01 X-56.82943 Y51.23356
G01 X-56.85946 Y51.16109
G01 X-57.04427 Y50.81532
G01 X-57.08783 Y50.75012
G01 X-57.33654 Y50.44705
G01 X-57.36291 Y50.41796
G01 X-57.38292 Y50.39795
G01 X-57.41201 Y50.37158
G01 X-57.71508 Y50.12287
G01 X-57.78028 Y50.07931
G01 X-58.12605 Y49.89450
G01 X-58.19852 Y49.86447
G01 X-58.35874 Y49.81588
G01 X-58.56941 Y49.81588
G01 X-58.59334 Y49.81545
G01 X-58.63601 Y49.81400
G01 X-58.65828 Y49.81362
G01 X-59.03004 Y49.81362
G01 X-59.05224 Y49.81319
G01 X-59.08572 Y49.81187
G01 X-59.10791 Y49.81144
G01 X-59.47964 Y49.81144
G01 X-59.50192 Y49.81106
G01 X-59.54459 Y49.80961
G01 X-59.56852 Y49.80918
G01 X-59.77913 Y49.80918
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-66.49995 Y53.66962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.49995 Y53.66962
G01 X-66.57656 Y53.76297
G01 X-66.63200 Y53.81842
G01 X-66.93508 Y54.06716
G01 X-67.00028 Y54.11072
G01 X-67.34605 Y54.29553
G01 X-67.41849 Y54.32555
G01 X-67.79367 Y54.43939
G01 X-67.87058 Y54.45466
G01 X-68.26078 Y54.49309
G01 X-68.33919 Y54.49309
G01 X-68.72938 Y54.45466
G01 X-68.80627 Y54.43939
G01 X-69.18148 Y54.32555
G01 X-69.25392 Y54.29553
G01 X-69.59969 Y54.11072
G01 X-69.66489 Y54.06716
G01 X-69.96796 Y53.81844
G01 X-69.99705 Y53.79208
G01 X-74.11205 Y49.67710
G01 X-74.13839 Y49.64801
G01 X-74.38713 Y49.34494
G01 X-74.43069 Y49.27974
G01 X-74.61550 Y48.93397
G01 X-74.64553 Y48.86153
G01 X-74.75934 Y48.48632
G01 X-74.77463 Y48.40943
G01 X-74.80067 Y48.14502
G01 X-87.29587 Y48.14502
G01 X-91.03792 Y51.88708
G01 X-91.06701 Y51.91344
G01 X-91.37008 Y52.16216
G01 X-91.43528 Y52.20572
G01 X-91.78105 Y52.39053
G01 X-91.85352 Y52.42055
G01 X-92.22870 Y52.53437
G01 X-92.30559 Y52.54966
G01 X-92.69578 Y52.58809
G01 X-92.73500 Y52.59002
G01 X-95.89898 Y52.59002
G01 X-95.89898 Y56.41300
G01 X-95.90091 Y56.45222
G01 X-95.91053 Y56.54975
G01 X-95.92580 Y56.62666
G01 X-95.95425 Y56.72047
G01 X-95.97396 Y56.76807
G01 X-95.97396 Y56.83802
G01 X-95.98168 Y56.91605
G01 X-96.00192 Y56.98277
G01 X-96.00555 Y56.99319
G01 X-96.03576 Y57.04973
G01 X-96.04559 Y57.06537
G01 X-96.08478 Y57.11307
G01 X-96.09893 Y57.12722
G01 X-96.14663 Y57.16639
G01 X-96.16225 Y57.17622
G01 X-96.21879 Y57.20645
G01 X-96.22923 Y57.21008
G01 X-96.29595 Y57.23032
G01 X-96.37398 Y57.23802
G01 X-96.44391 Y57.23802
G01 X-96.49153 Y57.25773
G01 X-96.58534 Y57.28618
G01 X-96.66225 Y57.30147
G01 X-96.75976 Y57.31109
G01 X-96.83819 Y57.31109
G01 X-96.93573 Y57.30147
G01 X-97.01264 Y57.28618
G01 X-97.10642 Y57.25773
G01 X-97.15404 Y57.23802
G01 X-97.22397 Y57.23802
G01 X-97.30202 Y57.23032
G01 X-97.36854 Y57.21013
G01 X-97.37921 Y57.20642
G01 X-97.43550 Y57.17632
G01 X-97.45145 Y57.16631
G01 X-97.49887 Y57.12740
G01 X-97.51335 Y57.11290
G01 X-97.55224 Y57.06548
G01 X-97.56232 Y57.04947
G01 X-97.59232 Y56.99334
G01 X-97.59626 Y56.98211
G01 X-97.61627 Y56.91605
G01 X-97.62399 Y56.83802
G01 X-97.62399 Y56.76807
G01 X-97.64370 Y56.72047
G01 X-97.67215 Y56.62666
G01 X-97.68744 Y56.54975
G01 X-97.69707 Y56.45222
G01 X-97.69897 Y56.41300
G01 X-97.69897 Y52.28359
G01 X-97.84469 Y52.20572
G01 X-97.90987 Y52.16216
G01 X-98.21297 Y51.91344
G01 X-98.26842 Y51.85799
G01 X-98.51713 Y51.55492
G01 X-98.56067 Y51.48972
G01 X-98.74550 Y51.14395
G01 X-98.77553 Y51.07148
G01 X-98.88934 Y50.69630
G01 X-98.90461 Y50.61941
G01 X-98.94306 Y50.22922
G01 X-98.94306 Y50.15081
G01 X-98.90461 Y49.76061
G01 X-98.88934 Y49.68373
G01 X-98.77553 Y49.30854
G01 X-98.74550 Y49.23608
G01 X-98.56067 Y48.89031
G01 X-98.51713 Y48.82511
G01 X-98.26842 Y48.52203
G01 X-98.21297 Y48.46658
G01 X-97.90987 Y48.21787
G01 X-97.84469 Y48.17431
G01 X-97.49892 Y47.98950
G01 X-97.42646 Y47.95947
G01 X-97.05125 Y47.84566
G01 X-96.97439 Y47.83037
G01 X-96.58419 Y47.79194
G01 X-96.54500 Y47.79000
G01 X-93.72911 Y47.79000
G01 X-89.98705 Y44.04795
G01 X-89.95797 Y44.02158
G01 X-89.65489 Y43.77287
G01 X-89.58969 Y43.72931
G01 X-89.24392 Y43.54450
G01 X-89.17146 Y43.51447
G01 X-88.79627 Y43.40066
G01 X-88.71939 Y43.38537
G01 X-88.32919 Y43.34694
G01 X-88.29000 Y43.34500
G01 X-72.41500 Y43.34500
G01 X-72.37578 Y43.34694
G01 X-71.98559 Y43.38537
G01 X-71.90870 Y43.40066
G01 X-71.53352 Y43.51447
G01 X-71.46105 Y43.54450
G01 X-71.11528 Y43.72931
G01 X-71.05008 Y43.77287
G01 X-70.74701 Y44.02158
G01 X-70.69156 Y44.07703
G01 X-70.44284 Y44.38011
G01 X-70.39928 Y44.44531
G01 X-70.21447 Y44.79108
G01 X-70.18445 Y44.86354
G01 X-70.07063 Y45.23873
G01 X-70.05534 Y45.31561
G01 X-70.01691 Y45.70581
G01 X-70.01498 Y45.74500
G01 X-70.01498 Y46.98592
G01 X-66.60292 Y50.39795
G01 X-66.57658 Y50.42703
G01 X-66.49998 Y50.52038
G01 X-66.40287 Y50.79173
G01 X-66.38534 Y50.84936
G01 X-66.28715 Y51.24141
G01 X-66.27996 Y51.27740
G01 X-66.22179 Y51.66947
G01 X-66.21946 Y51.69312
G01 X-66.20020 Y52.08520
G01 X-66.20020 Y52.10483
G01 X-66.21946 Y52.49693
G01 X-66.22179 Y52.52058
G01 X-66.27996 Y52.91265
G01 X-66.28715 Y52.94862
G01 X-66.38534 Y53.34069
G01 X-66.40287 Y53.39832
G01 X-66.49995 Y53.66962
G01 X-66.49998 Y63.57931
G01 X-66.50429 Y63.59358
G01 X-66.51852 Y63.66500
G01 X-72.05587 Y63.66500
G01 X-76.43292 Y59.28795
G01 X-76.46201 Y59.26158
G01 X-76.76508 Y59.01287
G01 X-76.83028 Y58.96931
G01 X-77.17605 Y58.78450
G01 X-77.24852 Y58.75447
G01 X-77.62370 Y58.64066
G01 X-77.70059 Y58.62537
G01 X-78.09078 Y58.58694
G01 X-78.16919 Y58.58694
G01 X-78.55939 Y58.62537
G01 X-78.63627 Y58.64066
G01 X-79.01146 Y58.75447
G01 X-79.08392 Y58.78450
G01 X-79.42969 Y58.96931
G01 X-79.49489 Y59.01287
G01 X-79.79797 Y59.26158
G01 X-79.85342 Y59.31703
G01 X-80.10213 Y59.62011
G01 X-80.14569 Y59.68531
G01 X-80.33050 Y60.03108
G01 X-80.36053 Y60.10354
G01 X-80.47434 Y60.47873
G01 X-80.48963 Y60.55561
G01 X-80.52806 Y60.94581
G01 X-80.52806 Y61.02422
G01 X-80.48963 Y61.41441
G01 X-80.47434 Y61.49130
G01 X-80.36053 Y61.86648
G01 X-80.33050 Y61.93895
G01 X-80.14569 Y62.28472
G01 X-80.10213 Y62.34992
G01 X-79.85342 Y62.65299
G01 X-79.82705 Y62.68208
G01 X-74.74705 Y67.76208
G01 X-74.71797 Y67.78844
G01 X-74.41489 Y68.03716
G01 X-74.34969 Y68.08072
G01 X-74.00392 Y68.26553
G01 X-73.93146 Y68.29555
G01 X-73.55627 Y68.40937
G01 X-73.47939 Y68.42466
G01 X-73.08919 Y68.46309
G01 X-73.05000 Y68.46502
G01 X-66.56000 Y68.46502
G01 X-66.56000 Y69.38000
G01 X-69.24000 Y69.38000
G01 X-69.27919 Y69.38194
G01 X-69.66939 Y69.42037
G01 X-69.74627 Y69.43566
G01 X-70.12146 Y69.54947
G01 X-70.19392 Y69.57950
G01 X-70.53969 Y69.76431
G01 X-70.60489 Y69.80787
G01 X-70.69280 Y69.88000
G01 X-70.74000 Y69.88000
G01 X-70.81803 Y69.88770
G01 X-70.88142 Y69.90693
G01 X-70.89570 Y69.91188
G01 X-70.95135 Y69.94162
G01 X-70.96750 Y69.95178
G01 X-71.01483 Y69.99060
G01 X-71.02940 Y70.00517
G01 X-71.06822 Y70.05250
G01 X-71.07838 Y70.06865
G01 X-71.10812 Y70.12430
G01 X-71.11307 Y70.13858
G01 X-71.13230 Y70.20197
G01 X-71.14000 Y70.28000
G01 X-71.14000 Y70.32720
G01 X-71.21213 Y70.41511
G01 X-71.25569 Y70.48031
G01 X-71.44050 Y70.82608
G01 X-71.46286 Y70.88000
G01 X-74.95500 Y70.88000
G01 X-74.99419 Y70.88193
G01 X-75.09173 Y70.89156
G01 X-75.16864 Y70.90685
G01 X-75.26244 Y70.93530
G01 X-75.31004 Y70.95501
G01 X-75.37999 Y70.95501
G01 X-75.45802 Y70.96270
G01 X-75.52401 Y70.98272
G01 X-75.53534 Y70.98668
G01 X-75.59127 Y71.01658
G01 X-75.60755 Y71.02681
G01 X-75.65477 Y71.06555
G01 X-75.66945 Y71.08023
G01 X-75.70819 Y71.12745
G01 X-75.71842 Y71.14373
G01 X-75.74832 Y71.19966
G01 X-75.75228 Y71.21099
G01 X-75.77230 Y71.27698
G01 X-75.77999 Y71.35501
G01 X-75.77999 Y71.42496
G01 X-75.79970 Y71.47256
G01 X-75.82815 Y71.56636
G01 X-75.84344 Y71.64327
G01 X-75.85307 Y71.74081
G01 X-75.85307 Y71.81922
G01 X-75.84344 Y71.91675
G01 X-75.82815 Y71.99366
G01 X-75.79970 Y72.08747
G01 X-75.77999 Y72.13507
G01 X-75.77999 Y72.20502
G01 X-75.77230 Y72.28305
G01 X-75.75223 Y72.34924
G01 X-75.74834 Y72.36031
G01 X-75.71835 Y72.41647
G01 X-75.70826 Y72.43250
G01 X-75.66932 Y72.47995
G01 X-75.65492 Y72.49435
G01 X-75.60742 Y72.53334
G01 X-75.59155 Y72.54330
G01 X-75.53521 Y72.57342
G01 X-75.52457 Y72.57715
G01 X-75.45802 Y72.59732
G01 X-75.37999 Y72.60502
G01 X-75.31004 Y72.60502
G01 X-75.26244 Y72.62473
G01 X-75.16864 Y72.65318
G01 X-75.09173 Y72.66847
G01 X-74.99419 Y72.67809
G01 X-74.95500 Y72.68002
G01 X-71.46286 Y72.68002
G01 X-71.44050 Y72.73395
G01 X-71.25569 Y73.07972
G01 X-71.21213 Y73.14492
G01 X-71.14000 Y73.23283
G01 X-71.14000 Y73.28002
G01 X-71.13230 Y73.35805
G01 X-71.11300 Y73.42168
G01 X-71.10814 Y73.43567
G01 X-71.07835 Y73.49145
G01 X-71.06827 Y73.50750
G01 X-71.02933 Y73.55495
G01 X-71.01493 Y73.56933
G01 X-70.96738 Y73.60837
G01 X-70.95163 Y73.61827
G01 X-70.89557 Y73.64822
G01 X-70.88203 Y73.65292
G01 X-70.81803 Y73.67233
G01 X-70.74000 Y73.68002
G01 X-70.69280 Y73.68002
G01 X-70.60489 Y73.75216
G01 X-70.53969 Y73.79572
G01 X-70.19392 Y73.98053
G01 X-70.12146 Y74.01055
G01 X-69.74627 Y74.12437
G01 X-69.66939 Y74.13966
G01 X-69.27919 Y74.17809
G01 X-69.24000 Y74.18002
G01 X-64.16000 Y74.18002
G01 X-64.12078 Y74.17809
G01 X-63.73059 Y74.13966
G01 X-63.65370 Y74.12437
G01 X-63.27852 Y74.01055
G01 X-63.20605 Y73.98053
G01 X-62.86028 Y73.79572
G01 X-62.79508 Y73.75216
G01 X-62.49201 Y73.50344
G01 X-62.43656 Y73.44799
G01 X-62.18784 Y73.14492
G01 X-62.14428 Y73.07972
G01 X-61.95947 Y72.73395
G01 X-61.92945 Y72.66148
G01 X-61.81563 Y72.28630
G01 X-61.80034 Y72.20941
G01 X-61.76191 Y71.81922
G01 X-61.75998 Y71.78000
G01 X-61.75998 Y64.56074
G01 X-61.75566 Y64.54646
G01 X-61.74035 Y64.46952
G01 X-61.70189 Y64.07923
G01 X-61.69996 Y64.04001
G01 X-61.69996 Y7.03672
G01 X-61.69971 Y7.03395
G01 X-61.70021 Y6.95554
G01 X-61.71116 Y6.85125
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-65.34113 Y4.96505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.34113 Y4.96505
G01 X-66.34087 Y4.96505
G01 X-70.01498 Y8.63913
G01 X-70.01498 Y10.18500
G01 X-70.01691 Y10.22422
G01 X-70.05534 Y10.61441
G01 X-70.07063 Y10.69130
G01 X-70.18445 Y11.06648
G01 X-70.21447 Y11.13895
G01 X-70.39928 Y11.48472
G01 X-70.44284 Y11.54992
G01 X-70.69156 Y11.85299
G01 X-70.74701 Y11.90844
G01 X-71.05008 Y12.15716
G01 X-71.11528 Y12.20072
G01 X-71.46105 Y12.38553
G01 X-71.53352 Y12.41555
G01 X-71.90870 Y12.52937
G01 X-71.98559 Y12.54466
G01 X-72.37578 Y12.58309
G01 X-72.41500 Y12.58502
G01 X-89.83587 Y12.58502
G01 X-90.21728 Y12.96648
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-92.77450 Y5.59961 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.77450 Y5.59961
G01 X-92.77450 Y5.88044
G01 X-92.80594 Y6.15956
G01 X-92.86843 Y6.43334
G01 X-92.96119 Y6.69844
G01 X-93.08303 Y6.95148
G01 X-93.23243 Y7.18927
G01 X-93.40754 Y7.40883
G01 X-93.60617 Y7.60746
G01 X-93.82573 Y7.78257
G01 X-94.06352 Y7.93197
G01 X-94.31656 Y8.05381
G01 X-94.58166 Y8.14657
G01 X-94.85547 Y8.20908
G01 X-95.10972 Y8.23773
G01 X-95.13446 Y8.24050
G01 X-95.41544 Y8.24050
G01 X-95.44823 Y8.23682
G01 X-95.69446 Y8.20908
G01 X-95.96829 Y8.14657
G01 X-96.23337 Y8.05381
G01 X-96.48643 Y7.93197
G01 X-96.72420 Y7.78257
G01 X-96.94375 Y7.60746
G01 X-97.14241 Y7.40883
G01 X-97.31749 Y7.18927
G01 X-97.46506 Y6.95442
G01 X-97.46692 Y6.95145
G01 X-97.58876 Y6.69844
G01 X-97.68150 Y6.43334
G01 X-97.74401 Y6.15956
G01 X-97.77543 Y5.88044
G01 X-97.77543 Y5.59961
G01 X-97.74401 Y5.32049
G01 X-97.68150 Y5.04673
G01 X-97.58876 Y4.78161
G01 X-97.46692 Y4.52857
G01 X-97.31749 Y4.29078
G01 X-97.14241 Y4.07125
G01 X-96.94375 Y3.87259
G01 X-96.72422 Y3.69751
G01 X-96.48643 Y3.54808
G01 X-96.23339 Y3.42624
G01 X-95.96829 Y3.33350
G01 X-95.69451 Y3.27102
G01 X-95.41539 Y3.23957
G01 X-95.13456 Y3.23957
G01 X-94.85544 Y3.27102
G01 X-94.58166 Y3.33350
G01 X-94.31656 Y3.42624
G01 X-94.06352 Y3.54808
G01 X-93.82573 Y3.69751
G01 X-93.60617 Y3.87259
G01 X-93.40754 Y4.07125
G01 X-93.23248 Y4.29075
G01 X-93.08268 Y4.52936
G01 X-92.96119 Y4.78163
G01 X-92.86843 Y5.04673
G01 X-92.80594 Y5.32052
G01 X-92.77450 Y5.59961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-91.85845 Y14.60760 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.85845 Y14.60760
G01 X-91.90434 Y14.75873
G01 X-91.91963 Y14.83561
G01 X-91.95806 Y15.22581
G01 X-91.96000 Y15.26500
G01 X-91.96000 Y18.49591
G01 X-95.21909 Y21.75500
G01 X-96.54500 Y21.75500
G01 X-96.58419 Y21.75694
G01 X-96.97439 Y21.79537
G01 X-97.05125 Y21.81066
G01 X-97.42646 Y21.92447
G01 X-97.49892 Y21.95450
G01 X-97.84469 Y22.13931
G01 X-97.90987 Y22.18287
G01 X-98.21297 Y22.43158
G01 X-98.26842 Y22.48703
G01 X-98.51713 Y22.79011
G01 X-98.56067 Y22.85531
G01 X-98.74550 Y23.20108
G01 X-98.77553 Y23.27354
G01 X-98.88934 Y23.64873
G01 X-98.90461 Y23.72561
G01 X-98.94306 Y24.11581
G01 X-98.94306 Y24.19422
G01 X-98.90461 Y24.58441
G01 X-98.88934 Y24.66130
G01 X-98.77553 Y25.03648
G01 X-98.74550 Y25.10895
G01 X-98.56067 Y25.45472
G01 X-98.51713 Y25.51992
G01 X-98.26842 Y25.82299
G01 X-98.21297 Y25.87844
G01 X-97.90987 Y26.12716
G01 X-97.84469 Y26.17072
G01 X-97.82595 Y26.18073
G01 X-97.82595 Y29.87000
G01 X-97.82402 Y29.90922
G01 X-97.81442 Y30.00675
G01 X-97.79912 Y30.08366
G01 X-97.77068 Y30.17747
G01 X-97.75099 Y30.22502
G01 X-97.75099 Y30.29502
G01 X-97.74330 Y30.37305
G01 X-97.72328 Y30.43906
G01 X-97.71929 Y30.45036
G01 X-97.68937 Y30.50640
G01 X-97.67921 Y30.52253
G01 X-97.64032 Y30.56995
G01 X-97.62592 Y30.58435
G01 X-97.57840 Y30.62334
G01 X-97.56255 Y30.63330
G01 X-97.50621 Y30.66342
G01 X-97.49557 Y30.66715
G01 X-97.42902 Y30.68732
G01 X-97.35099 Y30.69502
G01 X-97.28102 Y30.69502
G01 X-97.23342 Y30.71473
G01 X-97.13961 Y30.74318
G01 X-97.06270 Y30.75847
G01 X-96.96517 Y30.76809
G01 X-96.88676 Y30.76809
G01 X-96.78922 Y30.75847
G01 X-96.71231 Y30.74318
G01 X-96.61851 Y30.71473
G01 X-96.57091 Y30.69502
G01 X-96.50098 Y30.69502
G01 X-96.42293 Y30.68732
G01 X-96.35613 Y30.66705
G01 X-96.34581 Y30.66345
G01 X-96.28922 Y30.63319
G01 X-96.27365 Y30.62341
G01 X-96.22590 Y30.58425
G01 X-96.21175 Y30.57007
G01 X-96.17261 Y30.52237
G01 X-96.16278 Y30.50673
G01 X-96.13255 Y30.45019
G01 X-96.12890 Y30.43982
G01 X-96.10868 Y30.37305
G01 X-96.10098 Y30.29502
G01 X-96.10098 Y30.22512
G01 X-96.08122 Y30.17747
G01 X-96.05280 Y30.08366
G01 X-96.03751 Y30.00675
G01 X-96.02786 Y29.90922
G01 X-96.02593 Y29.87000
G01 X-96.02593 Y26.55502
G01 X-94.22499 Y26.55502
G01 X-94.18577 Y26.55309
G01 X-93.79558 Y26.51466
G01 X-93.71869 Y26.49937
G01 X-93.34351 Y26.38555
G01 X-93.27104 Y26.35553
G01 X-92.92527 Y26.17072
G01 X-92.86007 Y26.12716
G01 X-92.55700 Y25.87844
G01 X-92.52791 Y25.85208
G01 X-87.86292 Y21.18709
G01 X-87.83656 Y21.15800
G01 X-87.58784 Y20.85493
G01 X-87.54428 Y20.78973
G01 X-87.35947 Y20.44396
G01 X-87.32945 Y20.37149
G01 X-87.21563 Y19.99631
G01 X-87.20034 Y19.91942
G01 X-87.16191 Y19.52923
G01 X-87.15998 Y19.49001
G01 X-87.15998 Y17.66502
G01 X-73.10410 Y17.66502
G01 X-69.99705 Y20.77208
G01 X-69.96796 Y20.79844
G01 X-69.66489 Y21.04716
G01 X-69.59969 Y21.09072
G01 X-69.25392 Y21.27553
G01 X-69.18148 Y21.30555
G01 X-68.80627 Y21.41937
G01 X-68.72938 Y21.43466
G01 X-68.33919 Y21.47309
G01 X-68.26078 Y21.47309
G01 X-67.87058 Y21.43466
G01 X-67.79370 Y21.41937
G01 X-67.41852 Y21.30555
G01 X-67.34605 Y21.27553
G01 X-67.00028 Y21.09072
G01 X-66.93508 Y21.04716
G01 X-66.63200 Y20.79844
G01 X-66.57656 Y20.74299
G01 X-66.49995 Y20.64962
G01 X-66.40287 Y20.37832
G01 X-66.38534 Y20.32069
G01 X-66.28715 Y19.92862
G01 X-66.27996 Y19.89265
G01 X-66.22179 Y19.50058
G01 X-66.21946 Y19.47693
G01 X-66.20020 Y19.08483
G01 X-66.20020 Y19.06520
G01 X-66.21946 Y18.67312
G01 X-66.22179 Y18.64947
G01 X-66.27996 Y18.25740
G01 X-66.28715 Y18.22143
G01 X-66.38534 Y17.82936
G01 X-66.40287 Y17.77173
G01 X-66.49998 Y17.50038
G01 X-66.57656 Y17.40703
G01 X-66.60292 Y17.37795
G01 X-70.41292 Y13.56795
G01 X-70.44200 Y13.54158
G01 X-70.74508 Y13.29287
G01 X-70.81028 Y13.24931
G01 X-71.15605 Y13.06450
G01 X-71.22852 Y13.03447
G01 X-71.60370 Y12.92066
G01 X-71.68058 Y12.90537
G01 X-71.76821 Y12.89673
G01 X-72.07078 Y12.86694
G01 X-72.11000 Y12.86500
G01 X-89.56000 Y12.86500
G01 X-89.59919 Y12.86694
G01 X-89.98939 Y12.90537
G01 X-90.06627 Y12.92066
G01 X-90.21728 Y12.96648
G01 X-90.42444 Y13.09063
G01 X-90.48006 Y13.12777
G01 X-90.79843 Y13.36389
G01 X-90.83917 Y13.39731
G01 X-91.13002 Y13.66094
G01 X-91.16406 Y13.69498
G01 X-91.42769 Y13.98583
G01 X-91.46111 Y14.02657
G01 X-91.69723 Y14.34494
G01 X-91.73437 Y14.40056
G01 X-91.85845 Y14.60760
G01 X-92.32116 Y15.07028
G01 X-94.14498 Y16.89413
G01 X-94.14498 Y19.07500
G01 X-94.14691 Y19.11422
G01 X-94.18534 Y19.50441
G01 X-94.20063 Y19.58130
G01 X-94.31445 Y19.95648
G01 X-94.34447 Y20.02895
G01 X-94.52928 Y20.37472
G01 X-94.57284 Y20.43992
G01 X-94.64498 Y20.52783
G01 X-94.64498 Y20.57502
G01 X-94.65267 Y20.65305
G01 X-94.67543 Y20.72808
G01 X-94.71239 Y20.79725
G01 X-94.76215 Y20.85785
G01 X-94.82275 Y20.90761
G01 X-94.89192 Y20.94457
G01 X-94.96695 Y20.96733
G01 X-95.01310 Y20.97187
G01 X-95.04498 Y20.97502
G01 X-95.09217 Y20.97502
G01 X-95.18008 Y21.04716
G01 X-95.24528 Y21.09072
G01 X-95.59105 Y21.27553
G01 X-95.66352 Y21.30555
G01 X-96.03870 Y21.41937
G01 X-96.11559 Y21.43466
G01 X-96.50576 Y21.47309
G01 X-96.58419 Y21.47309
G01 X-96.97439 Y21.43466
G01 X-97.05125 Y21.41937
G01 X-97.42646 Y21.30555
G01 X-97.49892 Y21.27553
G01 X-97.84469 Y21.09072
G01 X-97.90987 Y21.04716
G01 X-97.99780 Y20.97502
G01 X-98.04497 Y20.97502
G01 X-98.12303 Y20.96733
G01 X-98.18706 Y20.94789
G01 X-98.20052 Y20.94322
G01 X-98.25658 Y20.91330
G01 X-98.27238 Y20.90334
G01 X-98.31988 Y20.86438
G01 X-98.33435 Y20.84990
G01 X-98.37324 Y20.80250
G01 X-98.38332 Y20.78648
G01 X-98.41314 Y20.73072
G01 X-98.41807 Y20.71645
G01 X-98.43730 Y20.65305
G01 X-98.44500 Y20.57502
G01 X-98.44500 Y20.52783
G01 X-98.51713 Y20.43992
G01 X-98.56067 Y20.37472
G01 X-98.74550 Y20.02895
G01 X-98.77553 Y19.95648
G01 X-98.88934 Y19.58130
G01 X-98.90461 Y19.50441
G01 X-98.94306 Y19.11422
G01 X-98.94500 Y19.07500
G01 X-98.94500 Y15.90000
G01 X-98.94306 Y15.86081
G01 X-98.90461 Y15.47061
G01 X-98.88934 Y15.39373
G01 X-98.77553 Y15.01854
G01 X-98.74550 Y14.94608
G01 X-98.56067 Y14.60031
G01 X-98.51713 Y14.53511
G01 X-98.26842 Y14.23203
G01 X-98.24205 Y14.20295
G01 X-97.72115 Y13.68207
G01 X-97.74330 Y13.60905
G01 X-97.75099 Y13.53102
G01 X-97.75099 Y13.46102
G01 X-97.77068 Y13.41347
G01 X-97.79912 Y13.31966
G01 X-97.81444 Y13.24275
G01 X-97.82402 Y13.14522
G01 X-97.82402 Y13.06681
G01 X-97.81442 Y12.96925
G01 X-97.79912 Y12.89234
G01 X-97.77068 Y12.79856
G01 X-97.75099 Y12.75101
G01 X-97.75099 Y12.68101
G01 X-97.74330 Y12.60298
G01 X-97.72333 Y12.53717
G01 X-97.71929 Y12.52561
G01 X-97.68945 Y12.46981
G01 X-97.67916 Y12.45342
G01 X-97.64043 Y12.40623
G01 X-97.62577 Y12.39157
G01 X-97.57853 Y12.35281
G01 X-97.56224 Y12.34258
G01 X-97.50634 Y12.31268
G01 X-97.49501 Y12.30872
G01 X-97.42902 Y12.28870
G01 X-97.35099 Y12.28101
G01 X-97.28102 Y12.28101
G01 X-97.23342 Y12.26130
G01 X-97.13961 Y12.23285
G01 X-97.06270 Y12.21753
G01 X-96.96517 Y12.20793
G01 X-96.88676 Y12.20793
G01 X-96.78917 Y12.21756
G01 X-96.71228 Y12.23285
G01 X-96.61851 Y12.26130
G01 X-96.57091 Y12.28101
G01 X-96.50098 Y12.28101
G01 X-96.42293 Y12.28870
G01 X-96.34993 Y12.31085
G01 X-92.52705 Y8.48795
G01 X-92.49797 Y8.46158
G01 X-92.19489 Y8.21287
G01 X-92.12969 Y8.16931
G01 X-91.78392 Y7.98450
G01 X-91.71146 Y7.95447
G01 X-91.33627 Y7.84066
G01 X-91.25939 Y7.82537
G01 X-90.86919 Y7.78694
G01 X-90.83000 Y7.78500
G01 X-74.81500 Y7.78500
G01 X-74.81500 Y7.64500
G01 X-74.81306 Y7.60581
G01 X-74.77463 Y7.21561
G01 X-74.75934 Y7.13873
G01 X-74.64553 Y6.76354
G01 X-74.61550 Y6.69108
G01 X-74.43069 Y6.34531
G01 X-74.38713 Y6.28011
G01 X-74.13842 Y5.97703
G01 X-74.11205 Y5.94795
G01 X-69.03205 Y0.86795
G01 X-69.00297 Y0.84158
G01 X-68.79916 Y0.67435
G01 X-68.69989 Y0.59287
G01 X-68.63469 Y0.54931
G01 X-68.28892 Y0.36450
G01 X-68.21646 Y0.33447
G01 X-67.84127 Y0.22066
G01 X-67.76439 Y0.20537
G01 X-67.37419 Y0.16694
G01 X-67.33500 Y0.16500
G01 X-62.60328 Y0.16500
G01 X-62.56407 Y0.16694
G01 X-62.17387 Y0.20537
G01 X-62.09699 Y0.22066
G01 X-61.72180 Y0.33447
G01 X-61.64934 Y0.36450
G01 X-61.30357 Y0.54931
G01 X-61.23836 Y0.59287
G01 X-60.93529 Y0.84158
G01 X-60.90621 Y0.86795
G01 X-57.36090 Y4.41326
G01 X-57.33454 Y4.44234
G01 X-57.08582 Y4.74541
G01 X-57.04226 Y4.81061
G01 X-56.85745 Y5.15638
G01 X-56.82743 Y5.22885
G01 X-56.71361 Y5.60403
G01 X-56.69832 Y5.68092
G01 X-56.65989 Y6.07111
G01 X-56.65796 Y6.11031
G01 X-56.65796 Y14.51001
G01 X-56.65989 Y14.54923
G01 X-56.69832 Y14.93942
G01 X-56.71361 Y15.01631
G01 X-56.82743 Y15.39149
G01 X-56.85745 Y15.46396
G01 X-57.04226 Y15.80973
G01 X-57.08582 Y15.87493
G01 X-57.33454 Y16.17800
G01 X-57.38999 Y16.23345
G01 X-57.69306 Y16.48217
G01 X-57.75826 Y16.52573
G01 X-58.10403 Y16.71054
G01 X-58.17650 Y16.74056
G01 X-58.35874 Y16.79588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y16.11732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y16.11732
G01 X-54.97884 Y16.02631
G01 X-55.03429 Y15.97087
G01 X-55.15867 Y15.81933
G01 X-55.20223 Y15.75415
G01 X-55.29464 Y15.58126
G01 X-55.32464 Y15.50881
G01 X-55.36977 Y15.36005
G01 X-55.37358 Y15.36005
G01 X-55.34650 Y15.46101
G01 X-55.27627 Y15.63058
G01 X-55.18453 Y15.78951
G01 X-55.07279 Y15.93508
G01 X-54.94303 Y16.06485
G01 X-54.86799 Y16.12245
G01 X-54.86799 Y16.11732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y15.36005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y15.36005
G01 X-52.68944 Y15.46101
G01 X-52.75967 Y15.63053
G01 X-52.85144 Y15.78951
G01 X-52.96315 Y15.93510
G01 X-53.09289 Y16.06485
G01 X-53.16797 Y16.12248
G01 X-53.16797 Y16.11730
G01 X-53.05713 Y16.02631
G01 X-53.00168 Y15.97087
G01 X-52.87732 Y15.81933
G01 X-52.83376 Y15.75415
G01 X-52.74133 Y15.58126
G01 X-52.71133 Y15.50881
G01 X-52.66620 Y15.36005
G01 X-52.66239 Y15.36005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y13.66002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y13.66002
G01 X-52.68944 Y13.55903
G01 X-52.75967 Y13.38951
G01 X-52.85144 Y13.23056
G01 X-52.96315 Y13.08494
G01 X-53.09289 Y12.95520
G01 X-53.16797 Y12.89757
G01 X-53.16797 Y12.90272
G01 X-53.05713 Y12.99371
G01 X-53.00168 Y13.04915
G01 X-52.87732 Y13.20069
G01 X-52.83376 Y13.26589
G01 X-52.74133 Y13.43877
G01 X-52.71133 Y13.51121
G01 X-52.66620 Y13.66002
G01 X-52.66239 Y13.66002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y12.89759 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y12.89759
G01 X-54.94303 Y12.95520
G01 X-55.07279 Y13.08494
G01 X-55.18453 Y13.23056
G01 X-55.27627 Y13.38946
G01 X-55.34650 Y13.55906
G01 X-55.37358 Y13.66002
G01 X-55.36980 Y13.66002
G01 X-55.32464 Y13.51121
G01 X-55.29464 Y13.43877
G01 X-55.20223 Y13.26589
G01 X-55.15867 Y13.20069
G01 X-55.03429 Y13.04915
G01 X-54.97884 Y12.99371
G01 X-54.86799 Y12.90272
G01 X-54.86799 Y12.89759
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y8.61731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y8.61731
G01 X-54.97884 Y8.52633
G01 X-55.03429 Y8.47088
G01 X-55.15867 Y8.31934
G01 X-55.20223 Y8.25414
G01 X-55.29464 Y8.08124
G01 X-55.32464 Y8.00880
G01 X-55.36977 Y7.86004
G01 X-55.37358 Y7.86004
G01 X-55.34650 Y7.96100
G01 X-55.27627 Y8.13057
G01 X-55.18453 Y8.28950
G01 X-55.07279 Y8.43509
G01 X-54.94303 Y8.56486
G01 X-54.86799 Y8.62247
G01 X-54.86799 Y8.61731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y7.86004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y7.86004
G01 X-52.68944 Y7.96100
G01 X-52.75967 Y8.13055
G01 X-52.85144 Y8.28950
G01 X-52.96315 Y8.43509
G01 X-53.09289 Y8.56486
G01 X-53.16797 Y8.62247
G01 X-53.16797 Y8.61731
G01 X-53.05713 Y8.52633
G01 X-53.00168 Y8.47088
G01 X-52.87732 Y8.31934
G01 X-52.83376 Y8.25414
G01 X-52.74133 Y8.08124
G01 X-52.71133 Y8.00880
G01 X-52.66620 Y7.86004
G01 X-52.66239 Y7.86004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y5.39761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y5.39761
G01 X-54.86799 Y5.40271
G01 X-54.97884 Y5.49370
G01 X-55.03429 Y5.54917
G01 X-55.15867 Y5.70071
G01 X-55.20223 Y5.76588
G01 X-55.29464 Y5.93878
G01 X-55.32464 Y6.01122
G01 X-55.36980 Y6.16001
G01 X-55.37358 Y6.16001
G01 X-55.34650 Y6.05905
G01 X-55.27627 Y5.88948
G01 X-55.18453 Y5.73058
G01 X-55.07279 Y5.58498
G01 X-54.94303 Y5.45522
G01 X-54.86799 Y5.39761
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y6.16001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y6.16001
G01 X-52.68944 Y6.05905
G01 X-52.75967 Y5.88950
G01 X-52.85144 Y5.73058
G01 X-52.96315 Y5.58498
G01 X-53.09289 Y5.45522
G01 X-53.16797 Y5.39761
G01 X-53.16797 Y5.40271
G01 X-53.05713 Y5.49370
G01 X-53.00168 Y5.54917
G01 X-52.87732 Y5.70071
G01 X-52.83376 Y5.76588
G01 X-52.74133 Y5.93878
G01 X-52.71133 Y6.01122
G01 X-52.66620 Y6.16001
G01 X-52.66239 Y6.16001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50798 Y13.13084 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50798 Y13.13084
G01 X-39.53168 Y13.13397
G01 X-39.70894 Y13.18149
G01 X-39.87849 Y13.25172
G01 X-40.03744 Y13.34349
G01 X-40.18304 Y13.45520
G01 X-40.31280 Y13.58494
G01 X-40.42451 Y13.73056
G01 X-40.44153 Y13.76002
G01 X-40.43833 Y13.76002
G01 X-40.39866 Y13.70069
G01 X-40.27430 Y13.54915
G01 X-40.21885 Y13.49371
G01 X-40.06731 Y13.36935
G01 X-40.00211 Y13.32579
G01 X-39.82924 Y13.23336
G01 X-39.75677 Y13.20336
G01 X-39.56919 Y13.14646
G01 X-39.50798 Y13.13427
G01 X-39.50798 Y13.13084
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50798 Y15.88575 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50798 Y15.88575
G01 X-39.56919 Y15.87358
G01 X-39.75677 Y15.81666
G01 X-39.82924 Y15.78667
G01 X-40.00211 Y15.69426
G01 X-40.06731 Y15.65070
G01 X-40.21885 Y15.52632
G01 X-40.27430 Y15.47087
G01 X-40.39866 Y15.31933
G01 X-40.43828 Y15.26005
G01 X-40.44153 Y15.26005
G01 X-40.42451 Y15.28951
G01 X-40.31280 Y15.43508
G01 X-40.18304 Y15.56485
G01 X-40.03744 Y15.67658
G01 X-39.87851 Y15.76833
G01 X-39.70894 Y15.83856
G01 X-39.53168 Y15.88608
G01 X-39.50798 Y15.88920
G01 X-39.50798 Y15.88575
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07441 Y13.76002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07441 Y13.76002
G01 X-37.09140 Y13.73059
G01 X-37.20316 Y13.58494
G01 X-37.33290 Y13.45520
G01 X-37.47849 Y13.34349
G01 X-37.63745 Y13.25172
G01 X-37.80697 Y13.18149
G01 X-37.98426 Y13.13399
G01 X-38.00796 Y13.13087
G01 X-38.00796 Y13.13427
G01 X-37.94679 Y13.14646
G01 X-37.75919 Y13.20336
G01 X-37.68675 Y13.23336
G01 X-37.51385 Y13.32579
G01 X-37.44865 Y13.36935
G01 X-37.29711 Y13.49371
G01 X-37.24166 Y13.54915
G01 X-37.11731 Y13.70069
G01 X-37.07766 Y13.76002
G01 X-37.07441 Y13.76002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07441 Y15.26005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07441 Y15.26005
G01 X-37.09140 Y15.28949
G01 X-37.20316 Y15.43508
G01 X-37.33293 Y15.56485
G01 X-37.47849 Y15.67658
G01 X-37.63742 Y15.76833
G01 X-37.80699 Y15.83856
G01 X-37.98426 Y15.88608
G01 X-38.00796 Y15.88920
G01 X-38.00796 Y15.88575
G01 X-37.94679 Y15.87358
G01 X-37.75919 Y15.81666
G01 X-37.68675 Y15.78667
G01 X-37.51385 Y15.69426
G01 X-37.44865 Y15.65070
G01 X-37.29711 Y15.52632
G01 X-37.24166 Y15.47087
G01 X-37.11731 Y15.31933
G01 X-37.07768 Y15.26005
G01 X-37.07441 Y15.26005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.15999 Y15.53292 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.15999 Y15.53292
G01 X-33.31193 Y15.60785
G01 X-33.50809 Y15.73891
G01 X-33.68549 Y15.89451
G01 X-33.84109 Y16.07191
G01 X-33.97215 Y16.26807
G01 X-34.04708 Y16.42001
G01 X-34.04246 Y16.42001
G01 X-33.92681 Y16.20366
G01 X-33.88325 Y16.13846
G01 X-33.70913 Y15.92631
G01 X-33.65369 Y15.87087
G01 X-33.44154 Y15.69675
G01 X-33.37634 Y15.65319
G01 X-33.15999 Y15.53754
G01 X-33.15999 Y15.53292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-28.26025 Y10.45998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.26025 Y10.45998
G01 X-28.28446 Y10.45264
G01 X-28.35690 Y10.42264
G01 X-28.57300 Y10.30712
G01 X-28.63820 Y10.26356
G01 X-28.82763 Y10.10809
G01 X-28.88306 Y10.05267
G01 X-29.03853 Y9.86323
G01 X-29.08209 Y9.79803
G01 X-29.19761 Y9.58193
G01 X-29.22761 Y9.50949
G01 X-29.29873 Y9.27499
G01 X-29.31404 Y9.19808
G01 X-29.33805 Y8.95422
G01 X-29.33998 Y8.91500
G01 X-29.33998 Y6.57147
G01 X-29.79144 Y6.12001
G01 X-30.70020 Y6.12001
G01 X-30.72715 Y6.15285
G01 X-30.78775 Y6.20261
G01 X-30.85486 Y6.23847
G01 X-30.86502 Y6.24203
G01 X-30.93195 Y6.26233
G01 X-31.00998 Y6.27002
G01 X-33.81000 Y6.27002
G01 X-33.88803 Y6.26233
G01 X-33.95470 Y6.24211
G01 X-33.96517 Y6.23842
G01 X-34.03222 Y6.20261
G01 X-34.09283 Y6.15285
G01 X-34.11978 Y6.12001
G01 X-35.53453 Y6.12001
G01 X-36.85800 Y7.44348
G01 X-36.85800 Y8.01002
G01 X-36.86567 Y8.08805
G01 X-36.88589 Y8.15468
G01 X-36.88957 Y8.16519
G01 X-36.91977 Y8.22168
G01 X-36.92963 Y8.23738
G01 X-36.96872 Y8.28503
G01 X-36.98297 Y8.29928
G01 X-37.03062 Y8.33837
G01 X-37.04629 Y8.34822
G01 X-37.10285 Y8.37845
G01 X-37.11309 Y8.38206
G01 X-37.17994 Y8.40233
G01 X-37.25800 Y8.41002
G01 X-37.88972 Y8.41002
G01 X-38.09107 Y8.51764
G01 X-38.16351 Y8.54764
G01 X-38.39800 Y8.61876
G01 X-38.47491 Y8.63408
G01 X-38.71878 Y8.65808
G01 X-38.79719 Y8.65808
G01 X-39.04105 Y8.63408
G01 X-39.11796 Y8.61876
G01 X-39.35245 Y8.54764
G01 X-39.42490 Y8.51764
G01 X-39.62624 Y8.41002
G01 X-40.25799 Y8.41002
G01 X-40.33602 Y8.40233
G01 X-40.40275 Y8.38208
G01 X-40.41316 Y8.37845
G01 X-40.46955 Y8.34830
G01 X-40.48542 Y8.33832
G01 X-40.53289 Y8.29938
G01 X-40.54735 Y8.28493
G01 X-40.58626 Y8.23748
G01 X-40.59632 Y8.22148
G01 X-40.62634 Y8.16532
G01 X-40.63023 Y8.15422
G01 X-40.65029 Y8.08805
G01 X-40.65799 Y8.01002
G01 X-40.65799 Y6.01000
G01 X-40.65029 Y5.93197
G01 X-40.63030 Y5.86603
G01 X-40.62632 Y5.85466
G01 X-40.59645 Y5.79878
G01 X-40.58618 Y5.78244
G01 X-40.54745 Y5.73525
G01 X-40.53274 Y5.72057
G01 X-40.48555 Y5.68183
G01 X-40.46929 Y5.67157
G01 X-40.41329 Y5.64165
G01 X-40.40219 Y5.63776
G01 X-40.33602 Y5.61770
G01 X-40.25799 Y5.61000
G01 X-39.69144 Y5.61000
G01 X-37.38472 Y3.30330
G01 X-37.35563 Y3.27694
G01 X-37.16620 Y3.12146
G01 X-37.10100 Y3.07790
G01 X-36.88490 Y2.96238
G01 X-36.81246 Y2.93241
G01 X-36.57796 Y2.86127
G01 X-36.50105 Y2.84595
G01 X-36.25719 Y2.82195
G01 X-36.21799 Y2.82002
G01 X-34.11978 Y2.82002
G01 X-34.09283 Y2.78717
G01 X-34.03222 Y2.73744
G01 X-33.96532 Y2.70165
G01 X-33.95417 Y2.69777
G01 X-33.88803 Y2.67773
G01 X-33.81000 Y2.67000
G01 X-31.00998 Y2.67000
G01 X-30.93195 Y2.67773
G01 X-30.86558 Y2.69784
G01 X-30.85473 Y2.70163
G01 X-30.78775 Y2.73744
G01 X-30.72715 Y2.78717
G01 X-30.70020 Y2.82002
G01 X-29.10800 Y2.82002
G01 X-29.06878 Y2.82195
G01 X-28.82492 Y2.84595
G01 X-28.74801 Y2.86127
G01 X-28.51351 Y2.93241
G01 X-28.44107 Y2.96238
G01 X-28.22497 Y3.07790
G01 X-28.15977 Y3.12146
G01 X-27.97033 Y3.27694
G01 X-27.94125 Y3.30330
G01 X-26.52325 Y4.72128
G01 X-26.49691 Y4.75039
G01 X-26.34143 Y4.93980
G01 X-26.32325 Y4.96700
G01 X-22.50400 Y4.96700
G01 X-22.46478 Y4.96893
G01 X-22.36725 Y4.97856
G01 X-22.29034 Y4.99385
G01 X-22.19653 Y5.02230
G01 X-22.14893 Y5.04203
G01 X-22.07898 Y5.04203
G01 X-22.00095 Y5.04970
G01 X-21.93474 Y5.06980
G01 X-21.92369 Y5.07368
G01 X-21.86763 Y5.10363
G01 X-21.85147 Y5.11376
G01 X-21.80410 Y5.15265
G01 X-21.78963 Y5.16713
G01 X-21.75066 Y5.21458
G01 X-21.74070 Y5.23045
G01 X-21.71058 Y5.28679
G01 X-21.70685 Y5.29743
G01 X-21.68668 Y5.36398
G01 X-21.67898 Y5.44201
G01 X-21.67898 Y5.51196
G01 X-21.65927 Y5.55956
G01 X-21.63082 Y5.65336
G01 X-21.61553 Y5.73027
G01 X-21.60591 Y5.82781
G01 X-21.60591 Y5.90622
G01 X-21.61553 Y6.00375
G01 X-21.63082 Y6.08066
G01 X-21.65927 Y6.17447
G01 X-21.67898 Y6.22207
G01 X-21.67898 Y6.29202
G01 X-21.68668 Y6.37005
G01 X-21.70692 Y6.43677
G01 X-21.71055 Y6.44719
G01 X-21.74078 Y6.50373
G01 X-21.75061 Y6.51937
G01 X-21.78978 Y6.56707
G01 X-21.80393 Y6.58122
G01 X-21.85163 Y6.62039
G01 X-21.86727 Y6.63022
G01 X-21.92381 Y6.66045
G01 X-21.93423 Y6.66408
G01 X-22.00095 Y6.68432
G01 X-22.07898 Y6.69202
G01 X-22.14893 Y6.69202
G01 X-22.19653 Y6.71173
G01 X-22.29034 Y6.74018
G01 X-22.36725 Y6.75547
G01 X-22.46478 Y6.76509
G01 X-22.50400 Y6.76702
G01 X-26.03998 Y6.76702
G01 X-26.03998 Y8.91500
G01 X-26.04192 Y8.95422
G01 X-26.06592 Y9.19808
G01 X-26.08123 Y9.27499
G01 X-26.15235 Y9.50949
G01 X-26.18235 Y9.58193
G01 X-26.29787 Y9.79803
G01 X-26.34143 Y9.86323
G01 X-26.49691 Y10.05267
G01 X-26.55233 Y10.10809
G01 X-26.74176 Y10.26356
G01 X-26.80696 Y10.30712
G01 X-27.02307 Y10.42264
G01 X-27.09551 Y10.45264
G01 X-27.11966 Y10.45998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-27.11964 Y12.45007 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.11964 Y12.45007
G01 X-27.08476 Y12.43138
G01 X-27.01956 Y12.38781
G01 X-26.97958 Y12.35502
G01 X-23.67382 Y12.35502
G01 X-23.58320 Y12.42939
G01 X-23.51799 Y12.47296
G01 X-23.37969 Y12.54690
G01 X-23.30725 Y12.57689
G01 X-23.15716 Y12.62241
G01 X-23.08028 Y12.63773
G01 X-23.00169 Y12.64545
G01 X-22.92419 Y12.65309
G01 X-22.84578 Y12.65309
G01 X-22.68970 Y12.63773
G01 X-22.61281 Y12.62241
G01 X-22.46272 Y12.57689
G01 X-22.39028 Y12.54690
G01 X-22.25198 Y12.47296
G01 X-22.18678 Y12.42939
G01 X-22.06555 Y12.32990
G01 X-22.01010 Y12.27445
G01 X-21.91061 Y12.15322
G01 X-21.86704 Y12.08802
G01 X-21.79310 Y11.94972
G01 X-21.76311 Y11.87727
G01 X-21.71759 Y11.72719
G01 X-21.70227 Y11.65030
G01 X-21.68691 Y11.49422
G01 X-21.68691 Y11.41581
G01 X-21.70227 Y11.25972
G01 X-21.71759 Y11.18284
G01 X-21.76311 Y11.03275
G01 X-21.79310 Y10.96031
G01 X-21.86704 Y10.82201
G01 X-21.91061 Y10.75680
G01 X-22.01010 Y10.63557
G01 X-22.06555 Y10.58012
G01 X-22.18678 Y10.48063
G01 X-22.25198 Y10.43707
G01 X-22.39028 Y10.36313
G01 X-22.46272 Y10.33313
G01 X-22.61281 Y10.28762
G01 X-22.68970 Y10.27230
G01 X-22.84578 Y10.25693
G01 X-22.92419 Y10.25693
G01 X-23.08028 Y10.27230
G01 X-23.15716 Y10.28762
G01 X-23.30725 Y10.33313
G01 X-23.37969 Y10.36313
G01 X-23.51799 Y10.43707
G01 X-23.58320 Y10.48063
G01 X-23.67382 Y10.55500
G01 X-26.97958 Y10.55500
G01 X-27.01956 Y10.52221
G01 X-27.08476 Y10.47865
G01 X-27.11966 Y10.45998
G01 X-27.23541 Y10.44858
G01 X-27.30673 Y10.44502
G01 X-27.35390 Y10.44502
G01 X-27.41646 Y10.44197
G01 X-27.45819 Y10.43786
G01 X-27.51565 Y10.43501
G01 X-27.66338 Y10.43501
G01 X-27.71656 Y10.43504
G01 X-27.86429 Y10.43501
G01 X-27.92174 Y10.43786
G01 X-27.96348 Y10.44197
G01 X-28.02604 Y10.44502
G01 X-28.07320 Y10.44502
G01 X-28.14453 Y10.44858
G01 X-28.26025 Y10.45998
G01 X-28.29523 Y10.47865
G01 X-28.36043 Y10.52221
G01 X-28.47407 Y10.61548
G01 X-28.52951 Y10.67093
G01 X-28.62278 Y10.78457
G01 X-28.66637 Y10.84977
G01 X-28.73566 Y10.97944
G01 X-28.76568 Y11.05188
G01 X-28.80836 Y11.19259
G01 X-28.82365 Y11.26948
G01 X-28.83805 Y11.41581
G01 X-28.83805 Y11.49422
G01 X-28.82365 Y11.64055
G01 X-28.80836 Y11.71743
G01 X-28.76568 Y11.85815
G01 X-28.73566 Y11.93059
G01 X-28.66637 Y12.06026
G01 X-28.62278 Y12.12546
G01 X-28.52951 Y12.23910
G01 X-28.47407 Y12.29455
G01 X-28.36043 Y12.38781
G01 X-28.29523 Y12.43138
G01 X-28.26025 Y12.45007
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-30.77287 Y16.42001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.77287 Y16.42001
G01 X-30.77752 Y16.42001
G01 X-30.89316 Y16.20366
G01 X-30.93672 Y16.13846
G01 X-31.11084 Y15.92631
G01 X-31.16629 Y15.87087
G01 X-31.37843 Y15.69675
G01 X-31.44363 Y15.65319
G01 X-31.65996 Y15.53754
G01 X-31.65996 Y15.53292
G01 X-31.50802 Y15.60785
G01 X-31.31186 Y15.73891
G01 X-31.13446 Y15.89451
G01 X-30.97886 Y16.07191
G01 X-30.84780 Y16.26807
G01 X-30.77287 Y16.42001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-27.11966 Y26.96998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.11966 Y26.96998
G01 X-27.09551 Y26.96264
G01 X-27.02307 Y26.93264
G01 X-26.80696 Y26.81712
G01 X-26.74176 Y26.77356
G01 X-26.55233 Y26.61809
G01 X-26.49691 Y26.56267
G01 X-26.34143 Y26.37323
G01 X-26.29787 Y26.30803
G01 X-26.18235 Y26.09193
G01 X-26.15235 Y26.01949
G01 X-26.08123 Y25.78499
G01 X-26.06592 Y25.70808
G01 X-26.04192 Y25.46422
G01 X-26.03998 Y25.42500
G01 X-26.03998 Y23.15002
G01 X-23.13900 Y23.15002
G01 X-23.09978 Y23.14809
G01 X-23.00225 Y23.13847
G01 X-22.92534 Y23.12318
G01 X-22.83153 Y23.09473
G01 X-22.78393 Y23.07502
G01 X-22.71398 Y23.07502
G01 X-22.63595 Y23.06732
G01 X-22.56092 Y23.04456
G01 X-22.49176 Y23.00761
G01 X-22.43115 Y22.95785
G01 X-22.38139 Y22.89724
G01 X-22.34444 Y22.82808
G01 X-22.32168 Y22.75305
G01 X-22.31398 Y22.67502
G01 X-22.31398 Y22.60507
G01 X-22.29427 Y22.55747
G01 X-22.26582 Y22.46366
G01 X-22.25053 Y22.38675
G01 X-22.24091 Y22.28922
G01 X-22.24091 Y22.21081
G01 X-22.25053 Y22.11327
G01 X-22.26488 Y22.04103
G01 X-22.26582 Y22.03636
G01 X-22.29427 Y21.94256
G01 X-22.31398 Y21.89496
G01 X-22.31398 Y21.82501
G01 X-22.32168 Y21.74698
G01 X-22.34444 Y21.67195
G01 X-22.38139 Y21.60278
G01 X-22.42854 Y21.54533
G01 X-22.43522 Y21.53883
G01 X-22.48652 Y21.49674
G01 X-22.50253 Y21.48668
G01 X-22.55869 Y21.45666
G01 X-22.56976 Y21.45277
G01 X-22.63595 Y21.43270
G01 X-22.71398 Y21.42501
G01 X-22.78393 Y21.42501
G01 X-22.83153 Y21.40530
G01 X-22.92534 Y21.37685
G01 X-23.00225 Y21.36156
G01 X-23.09978 Y21.35193
G01 X-23.13900 Y21.35000
G01 X-26.32325 Y21.35000
G01 X-26.34143 Y21.32280
G01 X-26.49691 Y21.13337
G01 X-26.52325 Y21.10428
G01 X-27.81425 Y19.81328
G01 X-27.84333 Y19.78694
G01 X-28.03277 Y19.63146
G01 X-28.09797 Y19.58790
G01 X-28.31407 Y19.47238
G01 X-28.38651 Y19.44239
G01 X-28.62101 Y19.37127
G01 X-28.69792 Y19.35595
G01 X-28.94178 Y19.33195
G01 X-28.98100 Y19.33002
G01 X-30.70020 Y19.33002
G01 X-30.72715 Y19.29717
G01 X-30.78775 Y19.24742
G01 X-30.85692 Y19.21046
G01 X-30.93195 Y19.18770
G01 X-31.00998 Y19.18000
G01 X-33.81000 Y19.18000
G01 X-33.88803 Y19.18770
G01 X-33.96306 Y19.21046
G01 X-34.03222 Y19.24742
G01 X-34.09283 Y19.29717
G01 X-34.11978 Y19.33002
G01 X-36.22000 Y19.33002
G01 X-36.25919 Y19.33195
G01 X-36.50306 Y19.35595
G01 X-36.57997 Y19.37127
G01 X-36.81446 Y19.44239
G01 X-36.88690 Y19.47238
G01 X-37.10301 Y19.58790
G01 X-37.16821 Y19.63146
G01 X-37.35764 Y19.78694
G01 X-37.38672 Y19.81328
G01 X-39.69345 Y22.12000
G01 X-40.26000 Y22.12000
G01 X-40.33803 Y22.12770
G01 X-40.40419 Y22.14776
G01 X-40.41529 Y22.15165
G01 X-40.47127 Y22.18157
G01 X-40.48756 Y22.19181
G01 X-40.53477 Y22.23057
G01 X-40.54943 Y22.24520
G01 X-40.58824 Y22.29249
G01 X-40.59838 Y22.30865
G01 X-40.62835 Y22.36468
G01 X-40.63223 Y22.37583
G01 X-40.65230 Y22.44197
G01 X-40.66000 Y22.52000
G01 X-40.66000 Y24.52002
G01 X-40.65230 Y24.59805
G01 X-40.63218 Y24.66440
G01 X-40.62837 Y24.67527
G01 X-40.59833 Y24.73148
G01 X-40.58827 Y24.74751
G01 X-40.54935 Y24.79493
G01 X-40.53490 Y24.80938
G01 X-40.48743 Y24.84832
G01 X-40.47155 Y24.85830
G01 X-40.41517 Y24.88845
G01 X-40.40475 Y24.89208
G01 X-40.33803 Y24.91233
G01 X-40.26000 Y24.92002
G01 X-39.62825 Y24.92002
G01 X-39.42690 Y25.02764
G01 X-39.35446 Y25.05764
G01 X-39.11997 Y25.12876
G01 X-39.04306 Y25.14408
G01 X-38.79919 Y25.16808
G01 X-38.72078 Y25.16808
G01 X-38.47692 Y25.14408
G01 X-38.40001 Y25.12876
G01 X-38.16551 Y25.05764
G01 X-38.09307 Y25.02764
G01 X-37.89173 Y24.92002
G01 X-37.25998 Y24.92002
G01 X-37.18195 Y24.91233
G01 X-37.11505 Y24.89203
G01 X-37.10486 Y24.88848
G01 X-37.04824 Y24.85820
G01 X-37.03265 Y24.84839
G01 X-36.98495 Y24.80925
G01 X-36.97075 Y24.79505
G01 X-36.93161 Y24.74735
G01 X-36.92178 Y24.73173
G01 X-36.89153 Y24.67514
G01 X-36.88797 Y24.66496
G01 X-36.86767 Y24.59805
G01 X-36.85998 Y24.52002
G01 X-36.85998 Y23.95348
G01 X-35.53654 Y22.63001
G01 X-34.11978 Y22.63001
G01 X-34.09283 Y22.66285
G01 X-34.03222 Y22.71261
G01 X-33.96517 Y22.74842
G01 X-33.95470 Y22.75211
G01 X-33.88803 Y22.77233
G01 X-33.81000 Y22.78002
G01 X-31.00998 Y22.78002
G01 X-30.93195 Y22.77233
G01 X-30.86502 Y22.75203
G01 X-30.85486 Y22.74847
G01 X-30.78775 Y22.71261
G01 X-30.72715 Y22.66285
G01 X-30.70020 Y22.63001
G01 X-29.66444 Y22.63001
G01 X-29.33998 Y22.95447
G01 X-29.33998 Y25.42500
G01 X-29.33805 Y25.46422
G01 X-29.31404 Y25.70808
G01 X-29.29873 Y25.78499
G01 X-29.22761 Y26.01949
G01 X-29.19761 Y26.09193
G01 X-29.08209 Y26.30803
G01 X-29.03853 Y26.37323
G01 X-28.88306 Y26.56267
G01 X-28.82763 Y26.61809
G01 X-28.63820 Y26.77356
G01 X-28.57300 Y26.81712
G01 X-28.35690 Y26.93264
G01 X-28.28446 Y26.96264
G01 X-28.26025 Y26.96998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-27.11964 Y28.96007 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.11964 Y28.96007
G01 X-27.08476 Y28.94138
G01 X-27.01956 Y28.89781
G01 X-26.97958 Y28.86502
G01 X-23.67382 Y28.86502
G01 X-23.58320 Y28.93939
G01 X-23.51799 Y28.98296
G01 X-23.37969 Y29.05690
G01 X-23.30725 Y29.08689
G01 X-23.15716 Y29.13241
G01 X-23.08028 Y29.14773
G01 X-22.92419 Y29.16309
G01 X-22.84578 Y29.16309
G01 X-22.68970 Y29.14773
G01 X-22.61281 Y29.13241
G01 X-22.46272 Y29.08689
G01 X-22.39028 Y29.05690
G01 X-22.25198 Y28.98296
G01 X-22.18678 Y28.93939
G01 X-22.06555 Y28.83990
G01 X-22.01010 Y28.78445
G01 X-21.91061 Y28.66322
G01 X-21.86704 Y28.59802
G01 X-21.79310 Y28.45972
G01 X-21.78322 Y28.43581
G01 X-21.76311 Y28.38727
G01 X-21.71759 Y28.23719
G01 X-21.70227 Y28.16030
G01 X-21.68691 Y28.00422
G01 X-21.68691 Y27.92581
G01 X-21.70227 Y27.76972
G01 X-21.71759 Y27.69284
G01 X-21.76311 Y27.54275
G01 X-21.79310 Y27.47031
G01 X-21.86704 Y27.33201
G01 X-21.91061 Y27.26680
G01 X-22.01010 Y27.14557
G01 X-22.06555 Y27.09012
G01 X-22.18678 Y26.99063
G01 X-22.25198 Y26.94707
G01 X-22.39028 Y26.87313
G01 X-22.46272 Y26.84313
G01 X-22.61281 Y26.79762
G01 X-22.68970 Y26.78230
G01 X-22.84578 Y26.76693
G01 X-22.92419 Y26.76693
G01 X-23.08028 Y26.78230
G01 X-23.15716 Y26.79762
G01 X-23.30725 Y26.84313
G01 X-23.37969 Y26.87313
G01 X-23.51799 Y26.94707
G01 X-23.58320 Y26.99063
G01 X-23.67382 Y27.06500
G01 X-26.97958 Y27.06500
G01 X-27.01956 Y27.03221
G01 X-27.08476 Y26.98865
G01 X-27.11966 Y26.96998
G01 X-27.23541 Y26.95858
G01 X-27.30673 Y26.95502
G01 X-27.35390 Y26.95502
G01 X-27.41646 Y26.95197
G01 X-27.45819 Y26.94786
G01 X-27.51565 Y26.94501
G01 X-27.86429 Y26.94501
G01 X-27.92174 Y26.94786
G01 X-27.96348 Y26.95197
G01 X-28.02604 Y26.95502
G01 X-28.07320 Y26.95502
G01 X-28.14453 Y26.95858
G01 X-28.26025 Y26.96998
G01 X-28.29523 Y26.98865
G01 X-28.36043 Y27.03221
G01 X-28.47407 Y27.12548
G01 X-28.52951 Y27.18093
G01 X-28.62278 Y27.29457
G01 X-28.66637 Y27.35977
G01 X-28.73566 Y27.48944
G01 X-28.76568 Y27.56188
G01 X-28.80836 Y27.70259
G01 X-28.82365 Y27.77948
G01 X-28.83805 Y27.92581
G01 X-28.83805 Y28.00422
G01 X-28.82365 Y28.15055
G01 X-28.80836 Y28.22743
G01 X-28.76568 Y28.36815
G01 X-28.73566 Y28.44059
G01 X-28.66637 Y28.57026
G01 X-28.62278 Y28.63546
G01 X-28.52951 Y28.74910
G01 X-28.47407 Y28.80455
G01 X-28.36043 Y28.89781
G01 X-28.29523 Y28.94138
G01 X-28.26025 Y28.96007
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-30.77287 Y32.93001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.77287 Y32.93001
G01 X-30.77752 Y32.93001
G01 X-30.89316 Y32.71366
G01 X-30.93672 Y32.64846
G01 X-31.11084 Y32.43631
G01 X-31.16629 Y32.38087
G01 X-31.37843 Y32.20675
G01 X-31.44363 Y32.16319
G01 X-31.65996 Y32.04754
G01 X-31.65996 Y32.04292
G01 X-31.50802 Y32.11785
G01 X-31.31186 Y32.24891
G01 X-31.13446 Y32.40451
G01 X-30.97886 Y32.58191
G01 X-30.84780 Y32.77807
G01 X-30.77287 Y32.93001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.15999 Y32.04292 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.15999 Y32.04292
G01 X-33.15999 Y32.04754
G01 X-33.37634 Y32.16319
G01 X-33.44154 Y32.20675
G01 X-33.65369 Y32.38087
G01 X-33.70913 Y32.43631
G01 X-33.88325 Y32.64846
G01 X-33.92681 Y32.71366
G01 X-34.04246 Y32.93001
G01 X-34.04708 Y32.93001
G01 X-33.97215 Y32.77807
G01 X-33.84109 Y32.58191
G01 X-33.68549 Y32.40451
G01 X-33.50809 Y32.24891
G01 X-33.31193 Y32.11785
G01 X-33.15999 Y32.04292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07641 Y30.27002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07641 Y30.27002
G01 X-37.07966 Y30.27002
G01 X-37.11931 Y30.21069
G01 X-37.24367 Y30.05915
G01 X-37.29912 Y30.00371
G01 X-37.45066 Y29.87935
G01 X-37.51586 Y29.83579
G01 X-37.68875 Y29.74336
G01 X-37.76120 Y29.71336
G01 X-37.94877 Y29.65646
G01 X-38.00996 Y29.64427
G01 X-38.00996 Y29.64087
G01 X-37.98627 Y29.64399
G01 X-37.80897 Y29.69149
G01 X-37.63945 Y29.76172
G01 X-37.48050 Y29.85349
G01 X-37.33491 Y29.96520
G01 X-37.20514 Y30.09494
G01 X-37.09343 Y30.24056
G01 X-37.07641 Y30.27002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07641 Y31.77005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07641 Y31.77005
G01 X-37.07969 Y31.77005
G01 X-37.11931 Y31.82933
G01 X-37.24367 Y31.98087
G01 X-37.29912 Y32.03632
G01 X-37.45066 Y32.16070
G01 X-37.51586 Y32.20426
G01 X-37.68875 Y32.29667
G01 X-37.76120 Y32.32666
G01 X-37.94877 Y32.38358
G01 X-38.00996 Y32.39575
G01 X-38.00996 Y32.39920
G01 X-37.98627 Y32.39608
G01 X-37.80900 Y32.34856
G01 X-37.63943 Y32.27833
G01 X-37.48050 Y32.18658
G01 X-37.33491 Y32.07485
G01 X-37.20514 Y31.94508
G01 X-37.09343 Y31.79951
G01 X-37.07641 Y31.77005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50999 Y29.64084 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50999 Y29.64084
G01 X-39.50999 Y29.64427
G01 X-39.57120 Y29.65646
G01 X-39.75878 Y29.71336
G01 X-39.83122 Y29.74336
G01 X-40.00412 Y29.83579
G01 X-40.06932 Y29.87935
G01 X-40.22086 Y30.00371
G01 X-40.27630 Y30.05915
G01 X-40.40066 Y30.21069
G01 X-40.44031 Y30.27002
G01 X-40.44354 Y30.27002
G01 X-40.42652 Y30.24056
G01 X-40.31481 Y30.09494
G01 X-40.18504 Y29.96520
G01 X-40.03945 Y29.85349
G01 X-39.88050 Y29.76172
G01 X-39.71093 Y29.69149
G01 X-39.53366 Y29.64397
G01 X-39.50999 Y29.64084
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50999 Y32.39575 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50999 Y32.39575
G01 X-39.50999 Y32.39920
G01 X-39.53366 Y32.39608
G01 X-39.71093 Y32.34856
G01 X-39.88052 Y32.27833
G01 X-40.03945 Y32.18658
G01 X-40.18504 Y32.07485
G01 X-40.31481 Y31.94508
G01 X-40.42652 Y31.79951
G01 X-40.44354 Y31.77005
G01 X-40.44029 Y31.77005
G01 X-40.40066 Y31.82933
G01 X-40.27630 Y31.98087
G01 X-40.22086 Y32.03632
G01 X-40.06932 Y32.16070
G01 X-40.00412 Y32.20426
G01 X-39.83122 Y32.29667
G01 X-39.75878 Y32.32666
G01 X-39.57120 Y32.38358
G01 X-39.50999 Y32.39575
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-28.26025 Y43.47998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.26025 Y43.47998
G01 X-28.28446 Y43.47264
G01 X-28.35690 Y43.44264
G01 X-28.57300 Y43.32712
G01 X-28.63820 Y43.28356
G01 X-28.82763 Y43.12809
G01 X-28.88306 Y43.07267
G01 X-29.03853 Y42.88323
G01 X-29.08209 Y42.81803
G01 X-29.19761 Y42.60193
G01 X-29.22761 Y42.52949
G01 X-29.29873 Y42.29499
G01 X-29.31404 Y42.21808
G01 X-29.33805 Y41.97422
G01 X-29.33998 Y41.93500
G01 X-29.33998 Y39.71847
G01 X-29.91844 Y39.14001
G01 X-30.70020 Y39.14001
G01 X-30.72715 Y39.17285
G01 X-30.78775 Y39.22261
G01 X-30.85486 Y39.25847
G01 X-30.86502 Y39.26203
G01 X-30.93195 Y39.28233
G01 X-31.00998 Y39.29002
G01 X-31.87652 Y39.29002
G01 X-33.78325 Y41.19675
G01 X-33.81233 Y41.22309
G01 X-34.00177 Y41.37856
G01 X-34.06697 Y41.42212
G01 X-34.28307 Y41.53764
G01 X-34.35551 Y41.56764
G01 X-34.59001 Y41.63876
G01 X-34.66692 Y41.65408
G01 X-34.91078 Y41.67808
G01 X-34.95000 Y41.68001
G01 X-38.75799 Y41.68001
G01 X-38.79719 Y41.67808
G01 X-39.04105 Y41.65408
G01 X-39.11796 Y41.63876
G01 X-39.35245 Y41.56764
G01 X-39.42490 Y41.53764
G01 X-39.62624 Y41.43002
G01 X-40.25799 Y41.43002
G01 X-40.33602 Y41.42233
G01 X-40.40275 Y41.40208
G01 X-40.41316 Y41.39845
G01 X-40.46955 Y41.36830
G01 X-40.48542 Y41.35832
G01 X-40.53289 Y41.31938
G01 X-40.54735 Y41.30493
G01 X-40.58626 Y41.25748
G01 X-40.59632 Y41.24148
G01 X-40.62634 Y41.18532
G01 X-40.63023 Y41.17422
G01 X-40.65029 Y41.10805
G01 X-40.65799 Y41.03002
G01 X-40.65799 Y39.03000
G01 X-40.65029 Y38.95197
G01 X-40.63028 Y38.88598
G01 X-40.62632 Y38.87466
G01 X-40.59642 Y38.81872
G01 X-40.58621 Y38.80247
G01 X-40.54745 Y38.75525
G01 X-40.53274 Y38.74054
G01 X-40.48555 Y38.70181
G01 X-40.46929 Y38.69157
G01 X-40.41329 Y38.66165
G01 X-40.40219 Y38.65776
G01 X-40.33602 Y38.63770
G01 X-40.25799 Y38.63000
G01 X-39.62624 Y38.63000
G01 X-39.42490 Y38.52238
G01 X-39.35245 Y38.49239
G01 X-39.11796 Y38.42127
G01 X-39.04105 Y38.40595
G01 X-38.79719 Y38.38195
G01 X-38.75799 Y38.38002
G01 X-35.63344 Y38.38002
G01 X-34.21000 Y36.95655
G01 X-34.21000 Y36.09000
G01 X-34.20230 Y36.01197
G01 X-34.18223 Y35.94583
G01 X-34.17835 Y35.93468
G01 X-34.14838 Y35.87865
G01 X-34.13822 Y35.86249
G01 X-34.09940 Y35.81517
G01 X-34.08483 Y35.80060
G01 X-34.04101 Y35.76465
G01 X-33.99836 Y35.73933
G01 X-33.96306 Y35.72046
G01 X-33.88803 Y35.69770
G01 X-33.81000 Y35.69000
G01 X-31.00998 Y35.69000
G01 X-30.93195 Y35.69770
G01 X-30.85692 Y35.72046
G01 X-30.78775 Y35.75742
G01 X-30.72715 Y35.80717
G01 X-30.70020 Y35.84002
G01 X-29.23500 Y35.84002
G01 X-29.19578 Y35.84195
G01 X-28.95192 Y35.86595
G01 X-28.87501 Y35.88127
G01 X-28.64051 Y35.95239
G01 X-28.56807 Y35.98238
G01 X-28.35197 Y36.09790
G01 X-28.28677 Y36.14146
G01 X-28.09733 Y36.29694
G01 X-28.06825 Y36.32328
G01 X-26.52325 Y37.86828
G01 X-26.49691 Y37.89737
G01 X-26.34143 Y38.08680
G01 X-26.32325 Y38.11400
G01 X-23.26600 Y38.11400
G01 X-23.22678 Y38.11593
G01 X-23.12925 Y38.12556
G01 X-23.05234 Y38.14085
G01 X-22.95853 Y38.16930
G01 X-22.91093 Y38.18901
G01 X-22.84098 Y38.18901
G01 X-22.76295 Y38.19670
G01 X-22.69676 Y38.21677
G01 X-22.68569 Y38.22066
G01 X-22.62953 Y38.25065
G01 X-22.61350 Y38.26074
G01 X-22.56605 Y38.29968
G01 X-22.55165 Y38.31408
G01 X-22.50903 Y38.36602
G01 X-22.50786 Y38.36777
G01 X-22.47144 Y38.43595
G01 X-22.44868 Y38.51098
G01 X-22.44098 Y38.58901
G01 X-22.44098 Y38.65896
G01 X-22.42127 Y38.70656
G01 X-22.39282 Y38.80036
G01 X-22.37753 Y38.87727
G01 X-22.37273 Y38.92576
G01 X-22.36791 Y38.97481
G01 X-22.36791 Y39.05322
G01 X-22.37753 Y39.15075
G01 X-22.39282 Y39.22766
G01 X-22.42127 Y39.32147
G01 X-22.44098 Y39.36907
G01 X-22.44098 Y39.43902
G01 X-22.44868 Y39.51705
G01 X-22.47144 Y39.59208
G01 X-22.50839 Y39.66124
G01 X-22.55815 Y39.72185
G01 X-22.61876 Y39.77161
G01 X-22.68792 Y39.80856
G01 X-22.76295 Y39.83132
G01 X-22.84098 Y39.83902
G01 X-22.91093 Y39.83902
G01 X-22.95853 Y39.85873
G01 X-23.05234 Y39.88718
G01 X-23.12925 Y39.90247
G01 X-23.22678 Y39.91209
G01 X-23.26600 Y39.91402
G01 X-26.03998 Y39.91402
G01 X-26.03998 Y41.93500
G01 X-26.04192 Y41.97422
G01 X-26.06592 Y42.21808
G01 X-26.08123 Y42.29499
G01 X-26.15235 Y42.52949
G01 X-26.18235 Y42.60193
G01 X-26.29787 Y42.81803
G01 X-26.34143 Y42.88323
G01 X-26.49691 Y43.07267
G01 X-26.55233 Y43.12809
G01 X-26.74176 Y43.28356
G01 X-26.80696 Y43.32712
G01 X-27.02307 Y43.44264
G01 X-27.09551 Y43.47264
G01 X-27.11966 Y43.47998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-27.11964 Y45.47007 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.11964 Y45.47007
G01 X-27.08476 Y45.45138
G01 X-27.01956 Y45.40781
G01 X-26.97958 Y45.37502
G01 X-23.67382 Y45.37502
G01 X-23.58320 Y45.44939
G01 X-23.51799 Y45.49296
G01 X-23.37969 Y45.56690
G01 X-23.30725 Y45.59689
G01 X-23.15716 Y45.64241
G01 X-23.08028 Y45.65773
G01 X-22.92419 Y45.67309
G01 X-22.84578 Y45.67309
G01 X-22.68970 Y45.65773
G01 X-22.61281 Y45.64241
G01 X-22.46272 Y45.59689
G01 X-22.39028 Y45.56690
G01 X-22.25198 Y45.49296
G01 X-22.18678 Y45.44939
G01 X-22.06555 Y45.34990
G01 X-22.01010 Y45.29445
G01 X-21.91061 Y45.17322
G01 X-21.86704 Y45.10802
G01 X-21.79310 Y44.96972
G01 X-21.78322 Y44.94581
G01 X-21.76311 Y44.89727
G01 X-21.71759 Y44.74719
G01 X-21.70227 Y44.67030
G01 X-21.68691 Y44.51422
G01 X-21.68691 Y44.43581
G01 X-21.70227 Y44.27972
G01 X-21.71759 Y44.20284
G01 X-21.76311 Y44.05275
G01 X-21.79310 Y43.98031
G01 X-21.86704 Y43.84201
G01 X-21.91061 Y43.77680
G01 X-22.01010 Y43.65557
G01 X-22.06555 Y43.60012
G01 X-22.18678 Y43.50063
G01 X-22.25198 Y43.45707
G01 X-22.39028 Y43.38313
G01 X-22.46272 Y43.35313
G01 X-22.61281 Y43.30762
G01 X-22.68970 Y43.29230
G01 X-22.84578 Y43.27693
G01 X-22.92419 Y43.27693
G01 X-23.08028 Y43.29230
G01 X-23.15716 Y43.30762
G01 X-23.30725 Y43.35313
G01 X-23.37969 Y43.38313
G01 X-23.51799 Y43.45707
G01 X-23.58320 Y43.50063
G01 X-23.67382 Y43.57500
G01 X-26.97958 Y43.57500
G01 X-27.01956 Y43.54221
G01 X-27.08476 Y43.49865
G01 X-27.11966 Y43.47998
G01 X-27.23541 Y43.46858
G01 X-27.30673 Y43.46502
G01 X-27.35390 Y43.46502
G01 X-27.41646 Y43.46197
G01 X-27.45819 Y43.45786
G01 X-27.51565 Y43.45501
G01 X-27.86429 Y43.45501
G01 X-27.92174 Y43.45786
G01 X-27.96348 Y43.46197
G01 X-28.02604 Y43.46502
G01 X-28.07320 Y43.46502
G01 X-28.14453 Y43.46858
G01 X-28.26025 Y43.47998
G01 X-28.29523 Y43.49865
G01 X-28.36043 Y43.54221
G01 X-28.47407 Y43.63548
G01 X-28.52951 Y43.69093
G01 X-28.62278 Y43.80457
G01 X-28.66637 Y43.86977
G01 X-28.73566 Y43.99944
G01 X-28.76568 Y44.07188
G01 X-28.80836 Y44.21259
G01 X-28.82365 Y44.28948
G01 X-28.83805 Y44.43581
G01 X-28.83805 Y44.51422
G01 X-28.82365 Y44.66055
G01 X-28.80836 Y44.73743
G01 X-28.76568 Y44.87815
G01 X-28.73566 Y44.95059
G01 X-28.66637 Y45.08026
G01 X-28.62278 Y45.14546
G01 X-28.52951 Y45.25910
G01 X-28.47407 Y45.31455
G01 X-28.36043 Y45.40781
G01 X-28.29523 Y45.45138
G01 X-28.26025 Y45.47007
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-30.77287 Y49.44001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.77287 Y49.44001
G01 X-30.77752 Y49.44001
G01 X-30.89316 Y49.22366
G01 X-30.93672 Y49.15846
G01 X-31.11084 Y48.94631
G01 X-31.16629 Y48.89087
G01 X-31.37843 Y48.71675
G01 X-31.44363 Y48.67319
G01 X-31.65996 Y48.55754
G01 X-31.65996 Y48.55292
G01 X-31.50802 Y48.62785
G01 X-31.31186 Y48.75891
G01 X-31.13446 Y48.91451
G01 X-30.97886 Y49.09191
G01 X-30.84780 Y49.28807
G01 X-30.77287 Y49.44001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-33.15999 Y48.55292 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.15999 Y48.55292
G01 X-33.15999 Y48.55754
G01 X-33.37634 Y48.67319
G01 X-33.44154 Y48.71675
G01 X-33.65369 Y48.89087
G01 X-33.70913 Y48.94631
G01 X-33.88325 Y49.15846
G01 X-33.92681 Y49.22366
G01 X-34.04246 Y49.44001
G01 X-34.04708 Y49.44001
G01 X-33.97215 Y49.28807
G01 X-33.84109 Y49.09191
G01 X-33.68549 Y48.91451
G01 X-33.50809 Y48.75891
G01 X-33.31193 Y48.62785
G01 X-33.15999 Y48.55292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07441 Y46.78002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07441 Y46.78002
G01 X-37.07766 Y46.78002
G01 X-37.11731 Y46.72069
G01 X-37.24166 Y46.56915
G01 X-37.29711 Y46.51371
G01 X-37.44865 Y46.38935
G01 X-37.51385 Y46.34579
G01 X-37.68675 Y46.25336
G01 X-37.75919 Y46.22336
G01 X-37.94679 Y46.16646
G01 X-38.00796 Y46.15427
G01 X-38.00796 Y46.15087
G01 X-37.98426 Y46.15399
G01 X-37.80697 Y46.20149
G01 X-37.63745 Y46.27172
G01 X-37.47849 Y46.36349
G01 X-37.33290 Y46.47520
G01 X-37.20316 Y46.60494
G01 X-37.09140 Y46.75059
G01 X-37.07441 Y46.78002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-37.07441 Y48.28005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.07441 Y48.28005
G01 X-37.07768 Y48.28005
G01 X-37.11731 Y48.33933
G01 X-37.24166 Y48.49087
G01 X-37.29711 Y48.54632
G01 X-37.44865 Y48.67070
G01 X-37.51385 Y48.71426
G01 X-37.68675 Y48.80667
G01 X-37.75919 Y48.83666
G01 X-37.94679 Y48.89358
G01 X-38.00796 Y48.90575
G01 X-38.00796 Y48.90920
G01 X-37.98426 Y48.90608
G01 X-37.80699 Y48.85856
G01 X-37.63742 Y48.78833
G01 X-37.47849 Y48.69658
G01 X-37.33293 Y48.58485
G01 X-37.20316 Y48.45508
G01 X-37.09140 Y48.30949
G01 X-37.07441 Y48.28005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50798 Y46.15084 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50798 Y46.15084
G01 X-39.50798 Y46.15427
G01 X-39.56919 Y46.16646
G01 X-39.75677 Y46.22336
G01 X-39.82924 Y46.25336
G01 X-40.00211 Y46.34579
G01 X-40.06731 Y46.38935
G01 X-40.21885 Y46.51371
G01 X-40.27430 Y46.56915
G01 X-40.39866 Y46.72069
G01 X-40.43833 Y46.78002
G01 X-40.44153 Y46.78002
G01 X-40.42451 Y46.75056
G01 X-40.31280 Y46.60494
G01 X-40.18304 Y46.47520
G01 X-40.03744 Y46.36349
G01 X-39.87849 Y46.27172
G01 X-39.70894 Y46.20149
G01 X-39.53168 Y46.15397
G01 X-39.50798 Y46.15084
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-39.50798 Y48.90575 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.50798 Y48.90575
G01 X-39.50798 Y48.90920
G01 X-39.53168 Y48.90608
G01 X-39.70894 Y48.85856
G01 X-39.87851 Y48.78833
G01 X-40.03744 Y48.69658
G01 X-40.18304 Y48.58485
G01 X-40.31280 Y48.45508
G01 X-40.42451 Y48.30951
G01 X-40.44153 Y48.28005
G01 X-40.43828 Y48.28005
G01 X-40.39866 Y48.33933
G01 X-40.27430 Y48.49087
G01 X-40.21885 Y48.54632
G01 X-40.06731 Y48.67070
G01 X-40.00211 Y48.71426
G01 X-39.82924 Y48.80667
G01 X-39.75677 Y48.83666
G01 X-39.56919 Y48.89358
G01 X-39.50798 Y48.90575
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y48.38005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y48.38005
G01 X-52.66620 Y48.38005
G01 X-52.71133 Y48.52881
G01 X-52.74133 Y48.60126
G01 X-52.83376 Y48.77415
G01 X-52.87732 Y48.83933
G01 X-53.00168 Y48.99087
G01 X-53.05713 Y49.04631
G01 X-53.16797 Y49.13730
G01 X-53.16797 Y49.14248
G01 X-53.09289 Y49.08485
G01 X-52.96315 Y48.95510
G01 X-52.85144 Y48.80951
G01 X-52.75967 Y48.65053
G01 X-52.68944 Y48.48101
G01 X-52.66239 Y48.38005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y49.13732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y49.13732
G01 X-54.86799 Y49.14245
G01 X-54.94303 Y49.08485
G01 X-55.07279 Y48.95508
G01 X-55.18453 Y48.80951
G01 X-55.27627 Y48.65058
G01 X-55.34650 Y48.48101
G01 X-55.37358 Y48.38005
G01 X-55.36977 Y48.38005
G01 X-55.32464 Y48.52881
G01 X-55.29464 Y48.60126
G01 X-55.20223 Y48.77415
G01 X-55.15867 Y48.83933
G01 X-55.03429 Y48.99087
G01 X-54.97884 Y49.04631
G01 X-54.86799 Y49.13732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y46.68002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y46.68002
G01 X-52.68944 Y46.57903
G01 X-52.75967 Y46.40951
G01 X-52.85144 Y46.25056
G01 X-52.96315 Y46.10494
G01 X-53.09289 Y45.97520
G01 X-53.16797 Y45.91757
G01 X-53.16797 Y45.92272
G01 X-53.05713 Y46.01371
G01 X-53.00168 Y46.06915
G01 X-52.87732 Y46.22069
G01 X-52.83376 Y46.28589
G01 X-52.74133 Y46.45877
G01 X-52.71133 Y46.53121
G01 X-52.66620 Y46.68002
G01 X-52.66239 Y46.68002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y45.91759 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y45.91759
G01 X-54.94303 Y45.97520
G01 X-55.07279 Y46.10494
G01 X-55.18453 Y46.25056
G01 X-55.27627 Y46.40946
G01 X-55.34650 Y46.57906
G01 X-55.37358 Y46.68002
G01 X-55.36980 Y46.68002
G01 X-55.32464 Y46.53121
G01 X-55.29464 Y46.45877
G01 X-55.20223 Y46.28589
G01 X-55.15867 Y46.22069
G01 X-55.03429 Y46.06915
G01 X-54.97884 Y46.01371
G01 X-54.86799 Y45.92272
G01 X-54.86799 Y45.91759
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y41.63731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y41.63731
G01 X-54.97884 Y41.54633
G01 X-55.03429 Y41.49088
G01 X-55.15867 Y41.33934
G01 X-55.20223 Y41.27414
G01 X-55.29464 Y41.10124
G01 X-55.32464 Y41.02880
G01 X-55.36977 Y40.88004
G01 X-55.37358 Y40.88004
G01 X-55.34650 Y40.98100
G01 X-55.27627 Y41.15057
G01 X-55.18453 Y41.30950
G01 X-55.07279 Y41.45509
G01 X-54.94303 Y41.58486
G01 X-54.86799 Y41.64247
G01 X-54.86799 Y41.63731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y40.88004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y40.88004
G01 X-52.68944 Y40.98100
G01 X-52.75967 Y41.15055
G01 X-52.85144 Y41.30950
G01 X-52.96315 Y41.45509
G01 X-53.09289 Y41.58486
G01 X-53.16797 Y41.64247
G01 X-53.16797 Y41.63731
G01 X-53.05713 Y41.54633
G01 X-53.00168 Y41.49088
G01 X-52.87732 Y41.33934
G01 X-52.83376 Y41.27414
G01 X-52.74133 Y41.10124
G01 X-52.71133 Y41.02880
G01 X-52.66620 Y40.88004
G01 X-52.66239 Y40.88004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66239 Y39.18001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66239 Y39.18001
G01 X-52.68944 Y39.07905
G01 X-52.75967 Y38.90950
G01 X-52.85144 Y38.75055
G01 X-52.96315 Y38.60496
G01 X-53.09289 Y38.47519
G01 X-53.16797 Y38.41758
G01 X-53.16797 Y38.42271
G01 X-53.05713 Y38.51370
G01 X-53.00168 Y38.56914
G01 X-52.87732 Y38.72068
G01 X-52.83376 Y38.78588
G01 X-52.74133 Y38.95878
G01 X-52.71133 Y39.03122
G01 X-52.66620 Y39.18001
G01 X-52.66239 Y39.18001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86799 Y38.41758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86799 Y38.41758
G01 X-54.94303 Y38.47519
G01 X-55.07279 Y38.60496
G01 X-55.18453 Y38.75055
G01 X-55.27627 Y38.90948
G01 X-55.34650 Y39.07905
G01 X-55.37358 Y39.18001
G01 X-55.36980 Y39.18001
G01 X-55.32464 Y39.03122
G01 X-55.29464 Y38.95878
G01 X-55.20223 Y38.78588
G01 X-55.15867 Y38.72068
G01 X-55.03429 Y38.56914
G01 X-54.97884 Y38.51370
G01 X-54.86799 Y38.42271
G01 X-54.86799 Y38.41758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y32.62732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y32.62732
G01 X-54.86998 Y32.63248
G01 X-54.94506 Y32.57485
G01 X-55.07480 Y32.44510
G01 X-55.18651 Y32.29951
G01 X-55.27828 Y32.14056
G01 X-55.34851 Y31.97104
G01 X-55.37556 Y31.87005
G01 X-55.37178 Y31.87005
G01 X-55.32664 Y32.01881
G01 X-55.29664 Y32.09126
G01 X-55.20421 Y32.26415
G01 X-55.16065 Y32.32933
G01 X-55.03629 Y32.48087
G01 X-54.98085 Y32.53631
G01 X-54.86998 Y32.62732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y31.87005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y31.87005
G01 X-52.66820 Y31.87005
G01 X-52.71334 Y32.01881
G01 X-52.74334 Y32.09126
G01 X-52.83574 Y32.26415
G01 X-52.87930 Y32.32933
G01 X-53.00368 Y32.48087
G01 X-53.05913 Y32.53631
G01 X-53.16995 Y32.62730
G01 X-53.16995 Y32.63245
G01 X-53.09492 Y32.57485
G01 X-52.96515 Y32.44508
G01 X-52.85339 Y32.29948
G01 X-52.76165 Y32.14056
G01 X-52.69144 Y31.97101
G01 X-52.66437 Y31.87005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y30.17002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y30.17002
G01 X-52.66818 Y30.17002
G01 X-52.71334 Y30.02121
G01 X-52.74334 Y29.94877
G01 X-52.83574 Y29.77589
G01 X-52.87930 Y29.71069
G01 X-53.00368 Y29.55915
G01 X-53.05913 Y29.50371
G01 X-53.16995 Y29.41272
G01 X-53.16995 Y29.40759
G01 X-53.09492 Y29.46520
G01 X-52.96515 Y29.59494
G01 X-52.85339 Y29.74059
G01 X-52.76165 Y29.89949
G01 X-52.69144 Y30.06903
G01 X-52.66437 Y30.17002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y29.40757 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y29.40757
G01 X-54.86998 Y29.41270
G01 X-54.98085 Y29.50371
G01 X-55.03629 Y29.55915
G01 X-55.16065 Y29.71069
G01 X-55.20421 Y29.77589
G01 X-55.29664 Y29.94877
G01 X-55.32664 Y30.02121
G01 X-55.37178 Y30.17002
G01 X-55.37556 Y30.17002
G01 X-55.34851 Y30.06903
G01 X-55.27828 Y29.89949
G01 X-55.18651 Y29.74056
G01 X-55.07480 Y29.59494
G01 X-54.94506 Y29.46520
G01 X-54.86998 Y29.40757
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y25.12734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y25.12734
G01 X-54.86998 Y25.13247
G01 X-54.94506 Y25.07486
G01 X-55.07480 Y24.94509
G01 X-55.18651 Y24.79950
G01 X-55.27828 Y24.64055
G01 X-55.34851 Y24.47103
G01 X-55.37556 Y24.37004
G01 X-55.37178 Y24.37004
G01 X-55.32664 Y24.51880
G01 X-55.29664 Y24.59124
G01 X-55.20421 Y24.76414
G01 X-55.16065 Y24.82934
G01 X-55.03629 Y24.98088
G01 X-54.98085 Y25.03633
G01 X-54.86998 Y25.12734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y24.37004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y24.37004
G01 X-52.66820 Y24.37004
G01 X-52.71334 Y24.51880
G01 X-52.74334 Y24.59124
G01 X-52.83574 Y24.76414
G01 X-52.87930 Y24.82934
G01 X-53.00368 Y24.98088
G01 X-53.05913 Y25.03633
G01 X-53.16995 Y25.12729
G01 X-53.16995 Y25.13247
G01 X-53.09492 Y25.07486
G01 X-52.96515 Y24.94509
G01 X-52.85339 Y24.79947
G01 X-52.76165 Y24.64057
G01 X-52.69144 Y24.47100
G01 X-52.66437 Y24.37004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-52.66437 Y22.67001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.66437 Y22.67001
G01 X-52.66820 Y22.67001
G01 X-52.71334 Y22.52122
G01 X-52.74334 Y22.44878
G01 X-52.83574 Y22.27588
G01 X-52.87930 Y22.21068
G01 X-53.00368 Y22.05914
G01 X-53.05913 Y22.00370
G01 X-53.16995 Y21.91274
G01 X-53.16995 Y21.90758
G01 X-53.09492 Y21.96519
G01 X-52.96515 Y22.09496
G01 X-52.85339 Y22.24058
G01 X-52.76165 Y22.39948
G01 X-52.69144 Y22.56905
G01 X-52.66437 Y22.67001
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-54.86998 Y21.90758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.86998 Y21.90758
G01 X-54.86998 Y21.91269
G01 X-54.98085 Y22.00370
G01 X-55.03629 Y22.05914
G01 X-55.16065 Y22.21068
G01 X-55.20421 Y22.27588
G01 X-55.29664 Y22.44878
G01 X-55.32664 Y22.52122
G01 X-55.37178 Y22.67001
G01 X-55.37556 Y22.67001
G01 X-55.34851 Y22.56902
G01 X-55.27828 Y22.39950
G01 X-55.18651 Y22.24055
G01 X-55.07480 Y22.09496
G01 X-54.94506 Y21.96519
G01 X-54.86998 Y21.90758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-59.77913 Y16.78918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.77913 Y16.78918
G01 X-59.93943 Y16.74056
G01 X-60.01190 Y16.71054
G01 X-60.24370 Y16.58664
G01 X-60.35767 Y16.52573
G01 X-60.42287 Y16.48217
G01 X-60.72595 Y16.23345
G01 X-60.78139 Y16.17800
G01 X-61.03011 Y15.87493
G01 X-61.07367 Y15.80973
G01 X-61.25848 Y15.46396
G01 X-61.28850 Y15.39149
G01 X-61.40232 Y15.01631
G01 X-61.41761 Y14.93942
G01 X-61.45604 Y14.54923
G01 X-61.45797 Y14.51001
G01 X-61.45797 Y7.10444
G01 X-61.71116 Y6.85125
G01 X-61.84230 Y6.57622
G01 X-61.87037 Y6.52402
G01 X-62.07908 Y6.17828
G01 X-62.09925 Y6.14830
G01 X-62.33625 Y5.83086
G01 X-62.35122 Y5.81272
G01 X-62.61573 Y5.52275
G01 X-62.62968 Y5.50889
G01 X-62.92142 Y5.24620
G01 X-62.94006 Y5.23098
G01 X-63.25932 Y4.99578
G01 X-63.29035 Y4.97518
G01 X-63.54004 Y4.82662
G01 X-63.65050 Y4.81061
G01 X-63.69820 Y4.80602
G01 X-64.09028 Y4.78801
G01 X-64.13399 Y4.78819
G01 X-64.52609 Y4.80868
G01 X-64.57430 Y4.81359
G01 X-64.96637 Y4.87305
G01 X-65.02797 Y4.88552
G01 X-65.34113 Y4.96505
G01 X-65.41049 Y5.00261
G01 X-65.47542 Y5.04661
G01 X-65.77689 Y5.29725
G01 X-65.80582 Y5.32380
G01 X-65.80780 Y5.32580
G01 X-65.83378 Y5.35483
G01 X-66.07882 Y5.65681
G01 X-66.12172 Y5.72169
G01 X-66.30366 Y6.06540
G01 X-66.33320 Y6.13733
G01 X-66.44521 Y6.50977
G01 X-66.46025 Y6.58607
G01 X-66.49807 Y6.97312
G01 X-66.49998 Y7.01201
G01 X-66.49998 Y17.50038
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-66.49995 Y20.64962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.49995 Y20.64962
G01 X-66.49998 Y28.10500
G01 X-73.05000 Y28.10500
G01 X-73.08919 Y28.10694
G01 X-73.47939 Y28.14537
G01 X-73.55627 Y28.16066
G01 X-73.93146 Y28.27447
G01 X-74.00392 Y28.30450
G01 X-74.34969 Y28.48931
G01 X-74.41489 Y28.53287
G01 X-74.71797 Y28.78158
G01 X-74.74705 Y28.80795
G01 X-79.82705 Y33.88795
G01 X-79.85342 Y33.91703
G01 X-80.10213 Y34.22011
G01 X-80.14569 Y34.28531
G01 X-80.33050 Y34.63108
G01 X-80.36053 Y34.70354
G01 X-80.47434 Y35.07873
G01 X-80.48963 Y35.15561
G01 X-80.52806 Y35.54581
G01 X-80.52806 Y35.62422
G01 X-80.48963 Y36.01441
G01 X-80.47434 Y36.09130
G01 X-80.36053 Y36.46648
G01 X-80.33050 Y36.53895
G01 X-80.14569 Y36.88472
G01 X-80.10213 Y36.94992
G01 X-79.85342 Y37.25299
G01 X-79.79797 Y37.30844
G01 X-79.49489 Y37.55716
G01 X-79.42969 Y37.60072
G01 X-79.08392 Y37.78553
G01 X-79.01146 Y37.81555
G01 X-78.83406 Y37.86935
G01 X-78.63627 Y37.92937
G01 X-78.55939 Y37.94466
G01 X-78.16919 Y37.98309
G01 X-78.09078 Y37.98309
G01 X-77.70059 Y37.94466
G01 X-77.62370 Y37.92937
G01 X-77.24852 Y37.81555
G01 X-77.17605 Y37.78553
G01 X-76.83028 Y37.60072
G01 X-76.76508 Y37.55716
G01 X-76.46201 Y37.30844
G01 X-76.43292 Y37.28208
G01 X-72.05587 Y32.90502
G01 X-66.49998 Y32.90502
G01 X-66.49998 Y34.01038
G01 X-66.40287 Y34.28173
G01 X-66.38534 Y34.33936
G01 X-66.28715 Y34.73143
G01 X-66.27996 Y34.76740
G01 X-66.22179 Y35.15947
G01 X-66.21946 Y35.18312
G01 X-66.20020 Y35.57520
G01 X-66.20020 Y35.59483
G01 X-66.21946 Y35.98693
G01 X-66.22179 Y36.01058
G01 X-66.27996 Y36.40265
G01 X-66.28715 Y36.43862
G01 X-66.38534 Y36.83069
G01 X-66.40287 Y36.88832
G01 X-66.49995 Y37.15962
G01 X-66.57656 Y37.25299
G01 X-66.60292 Y37.28208
G01 X-71.68292 Y42.36208
G01 X-71.71200 Y42.38844
G01 X-72.01508 Y42.63716
G01 X-72.08028 Y42.68072
G01 X-72.42605 Y42.86553
G01 X-72.49852 Y42.89555
G01 X-72.87370 Y43.00937
G01 X-72.95058 Y43.02466
G01 X-73.34078 Y43.06309
G01 X-73.38000 Y43.06502
G01 X-91.10587 Y43.06502
G01 X-94.64498 Y46.60413
G01 X-94.64498 Y46.61002
G01 X-94.65267 Y46.68805
G01 X-94.67543 Y46.76308
G01 X-94.71239 Y46.83225
G01 X-94.76215 Y46.89285
G01 X-94.82275 Y46.94261
G01 X-94.89192 Y46.97957
G01 X-94.96695 Y47.00233
G01 X-95.04498 Y47.01002
G01 X-95.09217 Y47.01002
G01 X-95.18008 Y47.08216
G01 X-95.24528 Y47.12572
G01 X-95.59105 Y47.31053
G01 X-95.66352 Y47.34055
G01 X-96.03870 Y47.45437
G01 X-96.11559 Y47.46966
G01 X-96.50576 Y47.50809
G01 X-96.58419 Y47.50809
G01 X-96.97439 Y47.46966
G01 X-97.05125 Y47.45437
G01 X-97.42646 Y47.34055
G01 X-97.49892 Y47.31053
G01 X-97.84469 Y47.12572
G01 X-97.90987 Y47.08216
G01 X-97.99780 Y47.01002
G01 X-98.04497 Y47.01002
G01 X-98.12303 Y47.00233
G01 X-98.18706 Y46.98289
G01 X-98.20052 Y46.97822
G01 X-98.25658 Y46.94830
G01 X-98.27238 Y46.93834
G01 X-98.31988 Y46.89938
G01 X-98.33435 Y46.88490
G01 X-98.37324 Y46.83750
G01 X-98.38332 Y46.82148
G01 X-98.41314 Y46.76572
G01 X-98.41807 Y46.75145
G01 X-98.43730 Y46.68805
G01 X-98.44500 Y46.61002
G01 X-98.44500 Y46.56283
G01 X-98.51713 Y46.47492
G01 X-98.56067 Y46.40972
G01 X-98.74550 Y46.06395
G01 X-98.77553 Y45.99148
G01 X-98.88934 Y45.61630
G01 X-98.90461 Y45.53941
G01 X-98.94306 Y45.14922
G01 X-98.94306 Y45.07081
G01 X-98.90461 Y44.68061
G01 X-98.88934 Y44.60373
G01 X-98.77553 Y44.22854
G01 X-98.74550 Y44.15608
G01 X-98.56067 Y43.81031
G01 X-98.51713 Y43.74511
G01 X-98.44500 Y43.65720
G01 X-98.44500 Y43.61000
G01 X-98.43730 Y43.53197
G01 X-98.41815 Y43.46880
G01 X-98.41309 Y43.45425
G01 X-98.38338 Y43.39865
G01 X-98.37324 Y43.38250
G01 X-98.33443 Y43.33523
G01 X-98.31977 Y43.32057
G01 X-98.27250 Y43.28178
G01 X-98.25627 Y43.27160
G01 X-98.20080 Y43.24193
G01 X-98.18569 Y43.23670
G01 X-98.12303 Y43.21770
G01 X-98.04497 Y43.21000
G01 X-98.03910 Y43.21000
G01 X-96.02092 Y41.19185
G01 X-97.24927 Y39.96353
G01 X-97.30202 Y39.95832
G01 X-97.37705 Y39.93556
G01 X-97.44469 Y39.89942
G01 X-97.44733 Y39.89767
G01 X-97.49887 Y39.85540
G01 X-97.51335 Y39.84090
G01 X-97.55224 Y39.79348
G01 X-97.56232 Y39.77747
G01 X-97.59232 Y39.72134
G01 X-97.59626 Y39.71011
G01 X-97.61627 Y39.64405
G01 X-97.62399 Y39.56602
G01 X-97.62399 Y39.49607
G01 X-97.64370 Y39.44847
G01 X-97.67215 Y39.35466
G01 X-97.68744 Y39.27775
G01 X-97.69707 Y39.18022
G01 X-97.69707 Y39.10181
G01 X-97.68744 Y39.00427
G01 X-97.67215 Y38.92736
G01 X-97.64370 Y38.83356
G01 X-97.62399 Y38.78596
G01 X-97.62399 Y38.71601
G01 X-97.61627 Y38.63798
G01 X-97.59631 Y38.57212
G01 X-97.59227 Y38.56064
G01 X-97.56242 Y38.50470
G01 X-97.55221 Y38.48845
G01 X-97.51348 Y38.44126
G01 X-97.49872 Y38.42652
G01 X-97.45155 Y38.38781
G01 X-97.43522 Y38.37755
G01 X-97.37934 Y38.34768
G01 X-97.36804 Y38.34372
G01 X-97.30202 Y38.32370
G01 X-97.22397 Y38.31601
G01 X-97.15404 Y38.31601
G01 X-97.10642 Y38.29630
G01 X-97.01264 Y38.26785
G01 X-96.93573 Y38.25256
G01 X-96.83819 Y38.24293
G01 X-96.75976 Y38.24293
G01 X-96.66225 Y38.25256
G01 X-96.58534 Y38.26785
G01 X-96.49153 Y38.29630
G01 X-96.44391 Y38.31601
G01 X-96.37398 Y38.31601
G01 X-96.29595 Y38.32370
G01 X-96.22976 Y38.34377
G01 X-96.21869 Y38.34766
G01 X-96.16253 Y38.37765
G01 X-96.14650 Y38.38774
G01 X-96.09905 Y38.42668
G01 X-96.08465 Y38.44108
G01 X-96.04566 Y38.48858
G01 X-96.03568 Y38.50448
G01 X-96.00441 Y38.56295
G01 X-95.98168 Y38.63798
G01 X-95.97647 Y38.69073
G01 X-94.74815 Y39.91905
G01 X-93.79705 Y38.96795
G01 X-93.76797 Y38.94158
G01 X-93.46489 Y38.69287
G01 X-93.39969 Y38.64931
G01 X-93.05392 Y38.46450
G01 X-92.98146 Y38.43447
G01 X-92.60627 Y38.32066
G01 X-92.52939 Y38.30537
G01 X-92.13919 Y38.26694
G01 X-92.10000 Y38.26500
G01 X-74.37410 Y38.26500
G01 X-69.99705 Y33.88795
G01 X-69.96796 Y33.86158
G01 X-69.66489 Y33.61287
G01 X-69.59969 Y33.56931
G01 X-69.25392 Y33.38450
G01 X-69.18148 Y33.35447
G01 X-68.80627 Y33.24066
G01 X-68.72938 Y33.22537
G01 X-68.33919 Y33.18694
G01 X-68.26078 Y33.18694
G01 X-67.87058 Y33.22537
G01 X-67.79370 Y33.24066
G01 X-67.59576 Y33.30070
G01 X-67.41852 Y33.35447
G01 X-67.34605 Y33.38450
G01 X-67.00028 Y33.56931
G01 X-66.93508 Y33.61287
G01 X-66.63200 Y33.86158
G01 X-66.57656 Y33.91703
G01 X-66.49998 Y34.01038
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-82.48613 Y29.65501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.48613 Y29.65501
G01 X-82.49552 Y29.63779
G01 X-82.63268 Y29.45458
G01 X-82.79453 Y29.29273
G01 X-82.97774 Y29.15557
G01 X-82.99496 Y29.14618
G01 X-82.99496 Y29.15169
G01 X-82.98976 Y29.15448
G01 X-82.92455 Y29.19804
G01 X-82.74269 Y29.34727
G01 X-82.68724 Y29.40272
G01 X-82.53802 Y29.58458
G01 X-82.49446 Y29.64978
G01 X-82.49164 Y29.65501
G01 X-82.48613 Y29.65501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-84.69499 Y29.14618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.69499 Y29.14618
G01 X-84.71221 Y29.15557
G01 X-84.89542 Y29.29273
G01 X-85.05727 Y29.45458
G01 X-85.19443 Y29.63779
G01 X-85.20382 Y29.65501
G01 X-85.19834 Y29.65501
G01 X-85.19552 Y29.64978
G01 X-85.15196 Y29.58458
G01 X-85.00273 Y29.40272
G01 X-84.94728 Y29.34727
G01 X-84.76542 Y29.19804
G01 X-84.70022 Y29.15448
G01 X-84.69499 Y29.15166
G01 X-84.69499 Y29.14618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-90.40999 Y34.22618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.40999 Y34.22618
G01 X-90.42721 Y34.23557
G01 X-90.61042 Y34.37273
G01 X-90.77227 Y34.53458
G01 X-90.90943 Y34.71779
G01 X-90.91882 Y34.73501
G01 X-90.91334 Y34.73501
G01 X-90.91052 Y34.72978
G01 X-90.86696 Y34.66458
G01 X-90.71773 Y34.48272
G01 X-90.66228 Y34.42727
G01 X-90.48042 Y34.27804
G01 X-90.41522 Y34.23448
G01 X-90.40999 Y34.23166
G01 X-90.40999 Y34.22618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-88.20113 Y34.73501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.20113 Y34.73501
G01 X-88.21052 Y34.71779
G01 X-88.34768 Y34.53458
G01 X-88.50953 Y34.37273
G01 X-88.69274 Y34.23557
G01 X-88.70996 Y34.22618
G01 X-88.70996 Y34.23169
G01 X-88.70476 Y34.23448
G01 X-88.63955 Y34.27804
G01 X-88.45769 Y34.42727
G01 X-88.40224 Y34.48272
G01 X-88.25302 Y34.66458
G01 X-88.20946 Y34.72978
G01 X-88.20664 Y34.73501
G01 X-88.20113 Y34.73501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-84.69499 Y31.85836 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.69499 Y31.85836
G01 X-84.70022 Y31.85554
G01 X-84.76542 Y31.81198
G01 X-84.94728 Y31.66276
G01 X-85.00273 Y31.60731
G01 X-85.15196 Y31.42545
G01 X-85.19552 Y31.36024
G01 X-85.19831 Y31.35504
G01 X-85.20382 Y31.35504
G01 X-85.19443 Y31.37226
G01 X-85.05727 Y31.55547
G01 X-84.89542 Y31.71732
G01 X-84.71221 Y31.85448
G01 X-84.69499 Y31.86387
G01 X-84.69499 Y31.85836
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-82.48613 Y31.35504 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.48613 Y31.35504
G01 X-82.49166 Y31.35504
G01 X-82.49446 Y31.36024
G01 X-82.53802 Y31.42545
G01 X-82.68724 Y31.60731
G01 X-82.74269 Y31.66276
G01 X-82.92455 Y31.81198
G01 X-82.98976 Y31.85554
G01 X-82.99496 Y31.85834
G01 X-82.99496 Y31.86387
G01 X-82.97774 Y31.85448
G01 X-82.79453 Y31.71732
G01 X-82.63268 Y31.55547
G01 X-82.49552 Y31.37226
G01 X-82.48613 Y31.35504
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-66.49995 Y37.15962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.49995 Y37.15962
G01 X-66.49998 Y50.52038
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-82.48613 Y65.21501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.48613 Y65.21501
G01 X-82.49164 Y65.21501
G01 X-82.49446 Y65.20978
G01 X-82.53802 Y65.14458
G01 X-82.68724 Y64.96272
G01 X-82.74269 Y64.90727
G01 X-82.92455 Y64.75804
G01 X-82.98976 Y64.71448
G01 X-82.99496 Y64.71169
G01 X-82.99496 Y64.70618
G01 X-82.97774 Y64.71557
G01 X-82.79453 Y64.85273
G01 X-82.63268 Y65.01458
G01 X-82.49552 Y65.19779
G01 X-82.48613 Y65.21501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-82.48613 Y66.91504 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.48613 Y66.91504
G01 X-82.49166 Y66.91504
G01 X-82.49446 Y66.92024
G01 X-82.53802 Y66.98545
G01 X-82.68724 Y67.16731
G01 X-82.74269 Y67.22276
G01 X-82.92455 Y67.37198
G01 X-82.98976 Y67.41554
G01 X-82.99496 Y67.41834
G01 X-82.99496 Y67.42387
G01 X-82.97774 Y67.41448
G01 X-82.79453 Y67.27732
G01 X-82.63268 Y67.11547
G01 X-82.49552 Y66.93226
G01 X-82.48613 Y66.91504
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-84.69499 Y67.41836 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.69499 Y67.41836
G01 X-84.70022 Y67.41554
G01 X-84.76542 Y67.37198
G01 X-84.94728 Y67.22276
G01 X-85.00273 Y67.16731
G01 X-85.15196 Y66.98545
G01 X-85.19552 Y66.92024
G01 X-85.19831 Y66.91504
G01 X-85.20382 Y66.91504
G01 X-85.19443 Y66.93226
G01 X-85.05727 Y67.11547
G01 X-84.89542 Y67.27732
G01 X-84.71221 Y67.41448
G01 X-84.69499 Y67.42387
G01 X-84.69499 Y67.41836
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-84.69499 Y64.70618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.69499 Y64.70618
G01 X-84.71221 Y64.71557
G01 X-84.89542 Y64.85273
G01 X-85.05727 Y65.01458
G01 X-85.19443 Y65.19779
G01 X-85.20382 Y65.21501
G01 X-85.19834 Y65.21501
G01 X-85.19552 Y65.20978
G01 X-85.15196 Y65.14458
G01 X-85.00273 Y64.96272
G01 X-84.94728 Y64.90727
G01 X-84.76542 Y64.75804
G01 X-84.70022 Y64.71448
G01 X-84.69499 Y64.71166
G01 X-84.69499 Y64.70618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-88.20113 Y61.83504 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.20113 Y61.83504
G01 X-88.20666 Y61.83504
G01 X-88.20946 Y61.84024
G01 X-88.25302 Y61.90545
G01 X-88.40224 Y62.08731
G01 X-88.45769 Y62.14276
G01 X-88.63955 Y62.29198
G01 X-88.70476 Y62.33554
G01 X-88.70996 Y62.33834
G01 X-88.70996 Y62.34387
G01 X-88.69274 Y62.33448
G01 X-88.50953 Y62.19732
G01 X-88.34768 Y62.03547
G01 X-88.21052 Y61.85226
G01 X-88.20113 Y61.83504
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-88.20113 Y60.13501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.20113 Y60.13501
G01 X-88.20664 Y60.13501
G01 X-88.20946 Y60.12978
G01 X-88.25302 Y60.06458
G01 X-88.40224 Y59.88272
G01 X-88.45769 Y59.82727
G01 X-88.63955 Y59.67804
G01 X-88.70476 Y59.63448
G01 X-88.70996 Y59.63169
G01 X-88.70996 Y59.62618
G01 X-88.69274 Y59.63557
G01 X-88.50953 Y59.77273
G01 X-88.34768 Y59.93458
G01 X-88.21052 Y60.11779
G01 X-88.20113 Y60.13501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-90.40999 Y59.62618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.40999 Y59.62618
G01 X-90.40999 Y59.63166
G01 X-90.41522 Y59.63448
G01 X-90.48042 Y59.67804
G01 X-90.66228 Y59.82727
G01 X-90.71773 Y59.88272
G01 X-90.86696 Y60.06458
G01 X-90.91052 Y60.12978
G01 X-90.91334 Y60.13501
G01 X-90.91882 Y60.13501
G01 X-90.90943 Y60.11779
G01 X-90.77227 Y59.93458
G01 X-90.61042 Y59.77273
G01 X-90.42721 Y59.63557
G01 X-90.40999 Y59.62618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-90.40999 Y62.33836 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.40999 Y62.33836
G01 X-90.40999 Y62.34387
G01 X-90.42721 Y62.33448
G01 X-90.61042 Y62.19732
G01 X-90.77227 Y62.03547
G01 X-90.90943 Y61.85226
G01 X-90.91882 Y61.83504
G01 X-90.91331 Y61.83504
G01 X-90.91052 Y61.84024
G01 X-90.86696 Y61.90545
G01 X-90.71773 Y62.08731
G01 X-90.66228 Y62.14276
G01 X-90.48042 Y62.29198
G01 X-90.41522 Y62.33554
G01 X-90.40999 Y62.33836
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z3.50000 ( retract )

G00 X-92.77450 Y72.90961 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.77450 Y72.90961
G01 X-92.77450 Y73.19044
G01 X-92.80594 Y73.46956
G01 X-92.86843 Y73.74334
G01 X-92.96119 Y74.00844
G01 X-93.08303 Y74.26148
G01 X-93.23243 Y74.49927
G01 X-93.40754 Y74.71883
G01 X-93.60617 Y74.91746
G01 X-93.82573 Y75.09257
G01 X-94.06352 Y75.24197
G01 X-94.31656 Y75.36381
G01 X-94.58166 Y75.45657
G01 X-94.85547 Y75.51908
G01 X-95.10972 Y75.54773
G01 X-95.13446 Y75.55050
G01 X-95.41544 Y75.55050
G01 X-95.44823 Y75.54682
G01 X-95.69446 Y75.51908
G01 X-95.96829 Y75.45657
G01 X-96.23337 Y75.36381
G01 X-96.48643 Y75.24197
G01 X-96.72420 Y75.09257
G01 X-96.94375 Y74.91746
G01 X-97.14241 Y74.71883
G01 X-97.31749 Y74.49927
G01 X-97.46692 Y74.26148
G01 X-97.58876 Y74.00844
G01 X-97.68150 Y73.74334
G01 X-97.74401 Y73.46956
G01 X-97.77543 Y73.19044
G01 X-97.77543 Y72.90961
G01 X-97.74401 Y72.63049
G01 X-97.68150 Y72.35671
G01 X-97.58876 Y72.09161
G01 X-97.46692 Y71.83857
G01 X-97.31749 Y71.60078
G01 X-97.14241 Y71.38122
G01 X-96.94375 Y71.18259
G01 X-96.72422 Y71.00751
G01 X-96.48643 Y70.85808
G01 X-96.23339 Y70.73624
G01 X-95.96829 Y70.64348
G01 X-95.69451 Y70.58099
G01 X-95.41539 Y70.54955
G01 X-95.13456 Y70.54955
G01 X-94.85544 Y70.58099
G01 X-94.58166 Y70.64348
G01 X-94.31656 Y70.73624
G01 X-94.06352 Y70.85808
G01 X-93.82573 Y71.00751
G01 X-93.60617 Y71.18259
G01 X-93.40754 Y71.38122
G01 X-93.23243 Y71.60080
G01 X-93.08303 Y71.83857
G01 X-92.96119 Y72.09163
G01 X-92.86843 Y72.35671
G01 X-92.80594 Y72.63052
G01 X-92.77450 Y72.90961

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )