( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.98000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-4.10049 Y34.76396 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-4.10049 Y34.76396
G01 X-5.11344 Y34.76399
G01 X-5.46416 Y34.61873
G01 X-5.67224 Y34.48205
G01 X-5.80891 Y34.27400
G01 X-5.95418 Y33.92325
G01 X-5.95418 Y32.57398
G01 X-5.94478 Y32.47837
G01 X-5.91689 Y32.38645
G01 X-5.87160 Y32.30174
G01 X-5.81206 Y32.22917
G01 X-6.97371 Y31.06753
G01 X-7.59161 Y31.68546
G01 X-7.74673 Y31.87446
G01 X-7.77901 Y31.91010
G01 X-8.52704 Y32.65815
G01 X-8.56268 Y32.69044
G01 X-8.78999 Y32.87700
G01 X-8.86987 Y32.93036
G01 X-9.12920 Y33.06897
G01 X-9.14846 Y33.07697
G01 X-9.22219 Y33.09168
G01 X-9.51622 Y33.13529
G01 X-9.60004 Y33.14357
G01 X-9.89412 Y33.15802
G01 X-9.93423 Y33.15901
G01 X-13.93206 Y33.15901
G01 X-13.98995 Y33.17580
G01 X-14.36244 Y33.26910
G01 X-14.41969 Y33.28053
G01 X-14.79216 Y33.33577
G01 X-14.83704 Y33.34022
G01 X-15.20953 Y33.35851
G01 X-15.22998 Y33.35899
G01 X-16.92997 Y33.35899
G01 X-16.95037 Y33.35851
G01 X-17.32284 Y33.34022
G01 X-17.36774 Y33.33577
G01 X-17.74021 Y33.28053
G01 X-17.79749 Y33.26910
G01 X-18.16995 Y33.17580
G01 X-18.24892 Y33.15178
G01 X-18.45796 Y33.07697
G01 X-18.58433 Y32.97329
G01 X-18.65225 Y32.90537
G01 X-18.88854 Y32.61746
G01 X-18.94132 Y32.53844
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.45796 Y33.07697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.45796 Y33.07697
G01 X-19.26769 Y33.07697
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-15.65888 Y28.86100 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.65888 Y28.86100
G01 X-15.22998 Y28.86100
G01 X-15.18195 Y28.86337
G01 X-14.81123 Y28.89989
G01 X-14.71705 Y28.91861
G01 X-14.36064 Y29.02674
G01 X-14.27189 Y29.06349
G01 X-14.12757 Y29.14063
G01 X-13.94339 Y29.23908
G01 X-13.91055 Y29.26103
G01 X-13.13567 Y29.26103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.14846 Y33.07697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.14846 Y33.07697
G01 X-7.41765 Y33.07697
G01 X-7.36962 Y33.07933
G01 X-7.17452 Y33.09854
G01 X-7.08031 Y33.11728
G01 X-6.89271 Y33.17420
G01 X-6.80396 Y33.21096
G01 X-6.63109 Y33.30336
G01 X-6.55120 Y33.35673
G01 X-6.39967 Y33.48109
G01 X-6.36403 Y33.51340
G01 X-5.95418 Y33.92325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.11344 Y34.76399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.11344 Y34.76399
G01 X-4.39002 Y35.48743
G01 X-4.35644 Y35.54982
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.87395 Y40.63975 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.87395 Y40.63975
G01 X-10.87395 Y40.37498
G01 X-11.13959 Y40.37498
G01 X-11.20913 Y40.35458
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-15.25685 Y44.93849 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.25685 Y44.93849
G01 X-15.32238 Y44.85864
G01 X-15.39030 Y44.79069
G01 X-15.51154 Y44.69122
G01 X-15.59142 Y44.63786
G01 X-15.63252 Y44.61586
G01 X-16.51283 Y43.73552
G01 X-16.51283 Y40.37117
G01 X-16.46493 Y40.36880
G01 X-16.31862 Y40.35440
G01 X-16.22441 Y40.33566
G01 X-16.08367 Y40.29296
G01 X-15.99492 Y40.25621
G01 X-15.86526 Y40.18686
G01 X-15.78537 Y40.13350
G01 X-15.69675 Y40.06075
G01 X-15.67173 Y40.04020
G01 X-15.63610 Y40.00790
G01 X-15.63239 Y40.00419
G01 X-15.59142 Y39.98229
G01 X-15.51154 Y39.92893
G01 X-15.39030 Y39.82944
G01 X-15.32238 Y39.76152
G01 X-15.25683 Y39.68163
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-12.27685 Y40.64061 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-12.27685 Y40.64061
G01 X-12.27685 Y40.37498
G01 X-12.01205 Y40.37498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.25621 Y36.05698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.25621 Y36.05698
G01 X-27.60120 Y36.05698
G01 X-27.64921 Y36.05461
G01 X-27.84430 Y36.03541
G01 X-27.93851 Y36.01667
G01 X-28.12612 Y35.95975
G01 X-28.21486 Y35.92299
G01 X-28.27219 Y35.89236
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.80192 Y33.07697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.80192 Y33.07697
G01 X-21.67561 Y32.97329
G01 X-21.60769 Y32.90537
G01 X-21.37139 Y32.61746
G01 X-21.31843 Y32.53816
G01 X-21.31826 Y32.53748
G01 X-21.31582 Y32.52998
G01 X-21.31584 Y32.52996
G01 X-21.27073 Y32.39003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-20.97325 Y33.07697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-20.97325 Y33.07697
G01 X-21.80192 Y33.07697
G01 X-22.01099 Y33.15178
G01 X-22.08996 Y33.17580
G01 X-22.46242 Y33.26910
G01 X-22.51970 Y33.28053
G01 X-22.89217 Y33.33577
G01 X-22.93707 Y33.34022
G01 X-23.30951 Y33.35851
G01 X-23.32996 Y33.35899
G01 X-24.82996 Y33.35899
G01 X-24.85038 Y33.35851
G01 X-25.22285 Y33.34022
G01 X-25.26775 Y33.33577
G01 X-25.64022 Y33.28053
G01 X-25.69747 Y33.26910
G01 X-26.06996 Y33.17580
G01 X-26.12785 Y33.15901
G01 X-26.32396 Y33.15901
G01 X-26.36404 Y33.15802
G01 X-26.65810 Y33.14357
G01 X-26.74192 Y33.13529
G01 X-26.99274 Y33.09808
G01 X-27.03094 Y33.07519
G01 X-27.10560 Y33.02536
G01 X-27.34438 Y32.84827
G01 X-27.40425 Y32.79917
G01 X-27.62238 Y32.60146
G01 X-27.64900 Y32.57611
G01 X-30.25611 Y29.96900
G01 X-33.20561 Y27.01953
G01 X-33.31465 Y26.78900
G01 X-33.34160 Y26.73848
G01 X-33.47147 Y26.52179
G01 X-33.49433 Y26.48755
G01 X-33.64190 Y26.28857
G01 X-33.66240 Y26.26360
G01 X-33.82715 Y26.08181
G01 X-33.83731 Y26.07114
G01 X-34.48290 Y25.42555
G01 X-34.49306 Y25.41488
G01 X-34.69077 Y25.19672
G01 X-34.71155 Y25.17140
G01 X-34.88864 Y24.93261
G01 X-34.91259 Y24.89675
G01 X-34.98678 Y24.77295
G01 X-35.00964 Y24.61892
G01 X-35.01409 Y24.57381
G01 X-35.02854 Y24.27973
G01 X-35.02905 Y24.25880
G01 X-35.02905 Y24.09698
G01 X-35.02854 Y24.07608
G01 X-35.01409 Y23.78202
G01 X-35.00964 Y23.73694
G01 X-34.96603 Y23.44285
G01 X-34.95503 Y23.38769
G01 X-34.88137 Y23.09368
G01 X-34.85922 Y23.02086
G01 X-34.75402 Y22.72680
G01 X-34.75191 Y22.72175
G01 X-34.68770 Y22.65754
G01 X-34.46039 Y22.47100
G01 X-34.38054 Y22.41763
G01 X-34.24447 Y22.34489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.75191 Y22.72175 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.75191 Y22.72175
G01 X-34.75194 Y22.02990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.77564 Y19.82744 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.77564 Y19.82744
G01 X-33.72349 Y19.79894
G01 X-33.67231 Y19.78779
G01 X-33.57909 Y19.78561
G01 X-33.50939 Y19.79061
G01 X-33.44277 Y19.80100
G01 X-33.40066 Y19.82678
G01 X-33.40063 Y19.82683
G01 X-33.29519 Y19.89143
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.72297 Y16.58993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.72297 Y16.58993
G01 X-26.60275 Y16.56105
G01 X-26.33796 Y16.56105
G01 X-26.33796 Y16.29545
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.48313 Y7.96158 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.48313 Y7.96158
G01 X-30.41359 Y7.98198
G01 X-30.14796 Y7.98198
G01 X-30.14796 Y8.24672
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.98018 Y3.86375 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.98018 Y3.86375
G01 X-21.98018 Y4.00901
G01 X-22.04896 Y4.04576
G01 X-22.12885 Y4.09915
G01 X-22.34099 Y4.27325
G01 X-22.40891 Y4.34117
G01 X-22.58302 Y4.55333
G01 X-22.63639 Y4.63319
G01 X-22.76575 Y4.87523
G01 X-22.80253 Y4.96397
G01 X-22.82923 Y5.05198
G01 X-22.96324 Y5.05198
G01 X-22.90012 Y4.87159
G01 X-22.80215 Y4.66819
G01 X-22.68203 Y4.47700
G01 X-22.54129 Y4.30053
G01 X-22.38165 Y4.14089
G01 X-22.20515 Y4.00014
G01 X-22.01396 Y3.88003
G01 X-21.98018 Y3.86375
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.51468 Y4.25199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.51468 Y4.25199
G01 X-19.60495 Y4.20723
G01 X-19.63360 Y4.18879
G01 X-19.63264 Y4.18729
G01 X-19.67450 Y4.16022
G01 X-19.87523 Y4.00012
G01 X-20.06637 Y3.88000
G01 X-20.10017 Y3.86372
G01 X-20.10017 Y4.00901
G01 X-20.03142 Y4.04576
G01 X-19.95153 Y4.09915
G01 X-19.76530 Y4.25199
G01 X-19.51468 Y4.25199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.48019 Y3.86375 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.48019 Y3.86375
G01 X-18.48019 Y4.00901
G01 X-18.54897 Y4.04576
G01 X-18.62883 Y4.09915
G01 X-18.81506 Y4.25199
G01 X-19.07330 Y4.25199
G01 X-19.06840 Y4.25028
G01 X-19.00917 Y4.22346
G01 X-18.90587 Y4.16022
G01 X-18.70510 Y4.00012
G01 X-18.51397 Y3.88003
G01 X-18.48019 Y3.86375
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.01471 Y4.25199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.01471 Y4.25199
G01 X-16.10496 Y4.20723
G01 X-16.13363 Y4.18879
G01 X-16.13259 Y4.18719
G01 X-16.17445 Y4.16024
G01 X-16.37519 Y4.00012
G01 X-16.56637 Y3.88000
G01 X-16.60016 Y3.86372
G01 X-16.60016 Y4.00901
G01 X-16.53140 Y4.04576
G01 X-16.45151 Y4.09915
G01 X-16.26531 Y4.25199
G01 X-16.01471 Y4.25199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.98017 Y3.86372 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.98017 Y3.86372
G01 X-14.98017 Y4.00901
G01 X-15.04898 Y4.04576
G01 X-15.12883 Y4.09915
G01 X-15.31507 Y4.25199
G01 X-15.57331 Y4.25199
G01 X-15.56841 Y4.25028
G01 X-15.50920 Y4.22346
G01 X-15.40590 Y4.16024
G01 X-15.20514 Y4.00012
G01 X-15.01395 Y3.88000
G01 X-14.98017 Y3.86372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-12.51469 Y4.25199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-12.51469 Y4.25199
G01 X-12.60494 Y4.20723
G01 X-12.63362 Y4.18879
G01 X-12.63265 Y4.18729
G01 X-12.67448 Y4.16022
G01 X-12.87522 Y4.00012
G01 X-13.06638 Y3.88003
G01 X-13.10016 Y3.86375
G01 X-13.10016 Y4.00901
G01 X-13.03140 Y4.04576
G01 X-12.95155 Y4.09915
G01 X-12.76531 Y4.25199
G01 X-12.51469 Y4.25199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.48018 Y3.86372 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.48018 Y3.86372
G01 X-11.48018 Y4.00901
G01 X-11.54896 Y4.04576
G01 X-11.62884 Y4.09915
G01 X-11.81507 Y4.25199
G01 X-12.07329 Y4.25199
G01 X-12.06849 Y4.25031
G01 X-12.00926 Y4.22349
G01 X-11.90585 Y4.16022
G01 X-11.70512 Y4.00012
G01 X-11.51398 Y3.88000
G01 X-11.48018 Y3.86372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.61711 Y5.05198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.61711 Y5.05198
G01 X-8.68023 Y4.87159
G01 X-8.77820 Y4.66819
G01 X-8.89832 Y4.47700
G01 X-9.03906 Y4.30053
G01 X-9.19870 Y4.14089
G01 X-9.37520 Y4.00014
G01 X-9.56639 Y3.88000
G01 X-9.60017 Y3.86375
G01 X-9.60017 Y4.00901
G01 X-9.53141 Y4.04576
G01 X-9.45153 Y4.09915
G01 X-9.23939 Y4.27325
G01 X-9.17147 Y4.34117
G01 X-8.99735 Y4.55333
G01 X-8.94399 Y4.63319
G01 X-8.81462 Y4.87523
G01 X-8.77784 Y4.96397
G01 X-8.75115 Y5.05198
G01 X-8.61711 Y5.05198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.61711 Y6.93199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.61711 Y6.93199
G01 X-8.68023 Y7.11238
G01 X-8.77820 Y7.31578
G01 X-8.89832 Y7.50697
G01 X-9.03906 Y7.68345
G01 X-9.19870 Y7.84309
G01 X-9.37520 Y7.98383
G01 X-9.56639 Y8.10397
G01 X-9.60017 Y8.12023
G01 X-9.60017 Y7.97494
G01 X-9.53141 Y7.93819
G01 X-9.45153 Y7.88480
G01 X-9.23939 Y7.71070
G01 X-9.17147 Y7.64278
G01 X-8.99735 Y7.43062
G01 X-8.94399 Y7.35076
G01 X-8.81462 Y7.10872
G01 X-8.77784 Y7.01998
G01 X-8.75117 Y6.93199
G01 X-8.61711 Y6.93199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.90796 Y8.01355 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.90796 Y8.01355
G01 X-14.90796 Y8.16491
G01 X-14.95987 Y8.13001
G01 X-15.01395 Y8.10397
G01 X-15.20514 Y7.98386
G01 X-15.40590 Y7.82373
G01 X-15.44806 Y7.79648
G01 X-15.44707 Y7.79496
G01 X-15.47570 Y7.77657
G01 X-15.56574 Y7.73196
G01 X-15.31507 Y7.73196
G01 X-15.12883 Y7.88480
G01 X-15.04898 Y7.93819
G01 X-14.90796 Y8.01355
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.00696 Y7.73196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.00696 Y7.73196
G01 X-16.01171 Y7.73364
G01 X-16.07100 Y7.76046
G01 X-16.17445 Y7.82373
G01 X-16.37519 Y7.98386
G01 X-16.56637 Y8.10397
G01 X-16.60016 Y8.12025
G01 X-16.60016 Y7.97494
G01 X-16.53140 Y7.93819
G01 X-16.45151 Y7.88480
G01 X-16.26531 Y7.73196
G01 X-16.00696 Y7.73196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.48019 Y7.97494 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.48019 Y7.97494
G01 X-18.48019 Y8.12023
G01 X-18.51397 Y8.10395
G01 X-18.70510 Y7.98386
G01 X-18.90587 Y7.82376
G01 X-18.94806 Y7.79648
G01 X-18.94704 Y7.79496
G01 X-18.97572 Y7.77657
G01 X-19.06573 Y7.73196
G01 X-18.81506 Y7.73196
G01 X-18.62883 Y7.88480
G01 X-18.54897 Y7.93819
G01 X-18.48019 Y7.97494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.50698 Y7.73196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.50698 Y7.73196
G01 X-19.51168 Y7.73359
G01 X-19.57096 Y7.76041
G01 X-19.67450 Y7.82376
G01 X-19.87523 Y7.98386
G01 X-20.06637 Y8.10397
G01 X-20.10017 Y8.12025
G01 X-20.10017 Y7.97494
G01 X-20.03142 Y7.93819
G01 X-19.95153 Y7.88480
G01 X-19.76530 Y7.73196
G01 X-19.50698 Y7.73196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.98018 Y7.97494 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.98018 Y7.97494
G01 X-21.98018 Y8.12023
G01 X-22.01396 Y8.10395
G01 X-22.20515 Y7.98383
G01 X-22.38165 Y7.84309
G01 X-22.54129 Y7.68345
G01 X-22.68203 Y7.50697
G01 X-22.80215 Y7.31578
G01 X-22.90012 Y7.11238
G01 X-22.96324 Y6.93199
G01 X-22.82920 Y6.93199
G01 X-22.80253 Y7.01998
G01 X-22.76575 Y7.10872
G01 X-22.63639 Y7.35076
G01 X-22.58302 Y7.43062
G01 X-22.40891 Y7.64278
G01 X-22.34099 Y7.71070
G01 X-22.12885 Y7.88480
G01 X-22.04896 Y7.93819
G01 X-21.98018 Y7.97494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.41217 Y18.14038 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.41217 Y18.14038
G01 X-18.41217 Y18.96168
G01 X-18.43200 Y18.98152
G01 X-18.47054 Y18.78780
G01 X-18.48605 Y18.55102
G01 X-18.47054 Y18.31429
G01 X-18.43200 Y18.12054
G01 X-18.41217 Y18.14038
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.85827 Y18.55102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.85827 Y18.55102
G01 X-14.87382 Y18.31429
G01 X-14.91233 Y18.12054
G01 X-14.93219 Y18.14038
G01 X-14.93219 Y18.96168
G01 X-14.91233 Y18.98152
G01 X-14.87382 Y18.78777
G01 X-14.85827 Y18.55102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.98327 Y28.88770 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.98327 Y28.88770
G01 X-25.07184 Y28.86707
G01 X-25.07367 Y28.86636
G01 X-25.15203 Y28.81597
G01 X-25.21947 Y28.75168
G01 X-25.26521 Y28.69888
G01 X-25.31921 Y28.62303
G01 X-25.35787 Y28.53832
G01 X-25.37984 Y28.44785
G01 X-25.38980 Y28.37868
G01 X-25.39468 Y28.29806
G01 X-25.38896 Y28.24361
G01 X-25.37743 Y28.21793
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.74334 Y25.64188 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.74334 Y25.64188
G01 X-28.79533 Y25.67031
G01 X-28.84661 Y25.68146
G01 X-28.93981 Y25.68364
G01 X-29.00948 Y25.67864
G01 X-29.07615 Y25.66822
G01 X-29.22368 Y25.57785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.77995 Y29.49539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.77995 Y29.49539
G01 X-34.96717 Y29.30817
G01 X-35.15496 Y29.49595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.29839 Y27.42502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.29839 Y27.42502
G01 X-37.11121 Y27.23784
G01 X-37.29900 Y27.05006
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.32062 Y32.95472 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.32062 Y32.95472
G01 X-31.29212 Y33.00687
G01 X-31.28100 Y33.05792
G01 X-31.27876 Y33.15109
G01 X-31.28374 Y33.22079
G01 X-31.29416 Y33.28754
G01 X-31.31996 Y33.32968
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.92060 Y34.73046 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.92060 Y34.73046
G01 X-29.73274 Y34.54260
G01 X-29.54549 Y34.72983
G01 X-29.54549 Y34.72985
G01 X-29.43996 Y34.79450
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.32199 Y40.99499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.32199 Y40.99499
G01 X-35.06113 Y40.99497
G01 X-34.65618 Y41.39992
G01 X-34.65618 Y41.66080
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.42499 Y42.89199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.42499 Y42.89199
G01 X-33.27861 Y43.03840
G01 X-33.24630 Y43.07401
G01 X-33.12194 Y43.22554
G01 X-33.06858 Y43.30543
G01 X-33.02217 Y43.39219
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.70906 Y42.89196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.70906 Y42.89196
G01 X-32.69517 Y42.88815
G01 X-32.50393 Y42.85595
G01 X-32.47302 Y42.85402
G01 X-32.46619 Y42.85361
G01 X-32.42121 Y42.85112
G01 X-32.40139 Y42.84914
G01 X-32.30439 Y42.82349
G01 X-32.22027 Y42.78064
G01 X-32.14694 Y42.72123
G01 X-32.08753 Y42.64790
G01 X-32.04468 Y42.56377
G01 X-32.01902 Y42.46677
G01 X-32.01707 Y42.44724
G01 X-32.01592 Y42.40197
G01 X-32.01592 Y40.70198
G01 X-32.01707 Y40.65674
G01 X-32.01902 Y40.63716
G01 X-32.04468 Y40.54018
G01 X-32.04518 Y40.53904
G01 X-32.08753 Y40.45610
G01 X-32.14694 Y40.38272
G01 X-32.18476 Y40.35052
G01 X-32.22024 Y40.32336
G01 X-32.26093 Y40.30124
G01 X-32.30439 Y40.28049
G01 X-32.40139 Y40.25483
G01 X-32.42093 Y40.25288
G01 X-32.46619 Y40.25174
G01 X-33.24686 Y40.25174
G01 X-33.37635 Y40.24241
G01 X-33.44620 Y40.23238
G01 X-33.47480 Y40.22783
G01 X-33.59806 Y40.13454
G01 X-33.61783 Y40.11679
G01 X-33.65290 Y40.08354
G01 X-34.14731 Y39.58913
G01 X-34.17932 Y39.55865
G01 X-34.19316 Y39.54610
G01 X-34.23271 Y39.51554
G01 X-34.29451 Y39.47183
G01 X-34.30591 Y39.46576
G01 X-34.36674 Y39.43401
G01 X-34.40644 Y39.41453
G01 X-34.44838 Y39.40020
G01 X-34.51384 Y39.37965
G01 X-34.52615 Y39.37587
G01 X-34.56362 Y39.36865
G01 X-34.60068 Y39.36312
G01 X-34.65036 Y39.35674
G01 X-34.66893 Y39.35583
G01 X-34.71320 Y39.35473
G01 X-35.61132 Y39.35473
G01 X-35.74076 Y39.34544
G01 X-35.81063 Y39.33538
G01 X-35.87860 Y39.31498
G01 X-36.43141 Y39.31498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.81063 Y39.33538 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.81063 Y39.33538
G01 X-35.93982 Y39.29659
G01 X-35.98130 Y39.26995
G01 X-36.04873 Y39.20564
G01 X-36.09448 Y39.15283
G01 X-36.14845 Y39.07699
G01 X-36.18714 Y38.99230
G01 X-36.20911 Y38.90183
G01 X-36.21045 Y38.89243
G01 X-36.20347 Y38.83035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.97074 Y31.75902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.97074 Y31.75902
G01 X-42.98578 Y31.53928
G01 X-42.99431 Y31.49821
G01 X-43.09449 Y31.59839
G01 X-43.09449 Y31.91967
G01 X-42.99431 Y32.01985
G01 X-42.98578 Y31.97878
G01 X-42.97074 Y31.75902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.07366 Y36.52604 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.07366 Y36.52604
G01 X-41.11954 Y36.59744
G01 X-41.18385 Y36.66487
G01 X-41.23666 Y36.71062
G01 X-41.31496 Y36.76602
G01 X-41.40254 Y36.80511
G01 X-41.42769 Y36.81349
G01 X-41.45149 Y36.82002
G01 X-41.19020 Y36.82002
G01 X-41.14217 Y36.82238
G01 X-41.03826 Y36.83262
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.71570 Y38.49167 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.71570 Y38.49167
G01 X-39.18020 Y39.02718
G01 X-39.18020 Y39.21001
G01 X-39.17181 Y39.29502
G01 X-38.98764 Y39.43312
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.09361 Y39.31498 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.09361 Y39.31498
G01 X-39.97994 Y39.17645
G01 X-39.92658 Y39.09657
G01 X-39.83417 Y38.92370
G01 X-39.79742 Y38.83495
G01 X-39.74050 Y38.64735
G01 X-39.72175 Y38.55314
G01 X-39.71570 Y38.49167
G01 X-39.76572 Y38.35184
G01 X-39.79894 Y38.27145
G01 X-39.88794 Y38.08326
G01 X-39.91817 Y38.02662
G01 X-40.02205 Y37.85326
G01 X-40.04984 Y37.81166
G01 X-40.16790 Y37.65248
G01 X-40.19467 Y37.61984
G01 X-40.32650 Y37.47442
G01 X-40.35457 Y37.44636
G01 X-40.43877 Y37.37003
G01 X-40.45365 Y37.35586
G01 X-40.49772 Y37.31179
G01 X-40.52990 Y37.28263
G01 X-40.60168 Y37.22373
G01 X-40.63851 Y37.19030
G01 X-40.68040 Y37.14841
G01 X-40.72355 Y37.10938
G01 X-40.79434 Y37.05129
G01 X-40.84893 Y37.00170
G01 X-40.88487 Y36.96576
G01 X-40.95319 Y36.90402
G01 X-41.02040 Y36.84885
G01 X-41.03826 Y36.83262
G01 X-41.05294 Y36.75883
G01 X-41.07214 Y36.56373
G01 X-41.07394 Y36.52718
G01 X-41.07366 Y36.52604
G01 X-41.07118 Y36.51570
G01 X-41.05411 Y36.42678
G01 X-41.04405 Y36.35690
G01 X-41.03475 Y36.22744
G01 X-41.03475 Y30.75904
G01 X-41.03361 Y30.71378
G01 X-41.03165 Y30.69425
G01 X-41.00600 Y30.59722
G01 X-40.96361 Y30.51391
G01 X-40.96315 Y30.51312
G01 X-40.90376 Y30.43979
G01 X-40.83036 Y30.38036
G01 X-40.74631 Y30.33753
G01 X-40.64931 Y30.31188
G01 X-40.62975 Y30.30992
G01 X-40.58449 Y30.30878
G01 X-40.36381 Y30.30878
G01 X-40.31535 Y30.30748
G01 X-40.28883 Y30.30606
G01 X-40.13580 Y30.28485
G01 X-40.11238 Y30.26788
G01 X-40.05589 Y30.22557
G01 X-39.95774 Y30.14061
G01 X-37.46105 Y27.64391
G01 X-37.39625 Y27.57175
G01 X-37.36298 Y27.53048
G01 X-37.29841 Y27.42504
G01 X-37.29839 Y27.42502
G01 X-37.27258 Y27.38288
G01 X-37.26217 Y27.31610
G01 X-37.25719 Y27.24640
G01 X-37.25942 Y27.15329
G01 X-37.27055 Y27.10213
G01 X-37.29900 Y27.05006
G01 X-37.33377 Y26.98646
G01 X-37.37606 Y26.92994
G01 X-37.46105 Y26.83180
G01 X-37.69419 Y26.59865
G01 X-37.72470 Y26.56660
G01 X-37.76971 Y26.51697
G01 X-37.88043 Y26.37744
G01 X-37.90717 Y26.34198
G01 X-37.92965 Y26.30381
G01 X-38.01619 Y26.14806
G01 X-38.03336 Y26.11178
G01 X-38.04484 Y26.08750
G01 X-38.07870 Y26.00574
G01 X-38.10126 Y25.94265
G01 X-38.15018 Y25.77135
G01 X-38.15752 Y25.74412
G01 X-38.16130 Y25.72847
G01 X-38.16745 Y25.68453
G01 X-38.18782 Y25.50747
G01 X-38.19112 Y25.44064
G01 X-38.19221 Y25.39639
G01 X-38.19221 Y24.93858
G01 X-38.19442 Y24.87549
G01 X-38.19684 Y24.84090
G01 X-38.23194 Y24.64618
G01 X-38.23191 Y23.58619
G01 X-38.22015 Y23.55329
G01 X-38.19247 Y23.46231
G01 X-38.11390 Y23.14867
G01 X-38.09966 Y23.07715
G01 X-38.05312 Y22.76348
G01 X-38.04715 Y22.70310
G01 X-38.03174 Y22.38944
G01 X-38.03174 Y22.33262
G01 X-38.04715 Y22.01896
G01 X-38.05312 Y21.95858
G01 X-38.09966 Y21.64492
G01 X-38.11390 Y21.57339
G01 X-38.19247 Y21.25972
G01 X-38.22015 Y21.16872
G01 X-38.23191 Y21.13582
G01 X-38.33240 Y20.85508
G01 X-38.38246 Y20.73453
G01 X-38.45650 Y20.57796
G01 X-38.36709 Y20.43222
G01 X-38.32950 Y20.36234
G01 X-38.24324 Y20.13831
G01 X-38.23194 Y20.10898
G01 X-38.22196 Y20.08304
G01 X-38.21769 Y20.06460
G01 X-38.21083 Y20.03687
G01 X-38.20009 Y19.99602
G01 X-38.17578 Y19.86717
G01 X-38.16747 Y19.79493
G01 X-38.16133 Y19.75099
G01 X-38.15020 Y19.70804
G01 X-38.10126 Y19.53677
G01 X-38.07867 Y19.47365
G01 X-38.04482 Y19.39191
G01 X-38.01619 Y19.33138
G01 X-37.94179 Y19.19752
G01 X-37.92965 Y19.17563
G01 X-37.90712 Y19.13738
G01 X-37.88048 Y19.10207
G01 X-37.76971 Y18.96247
G01 X-37.72473 Y18.91284
G01 X-37.69419 Y18.88081
G01 X-37.63885 Y18.82544
G01 X-35.15234 Y16.33896
G01 X-35.09958 Y16.28140
G01 X-35.07563 Y16.25288
G01 X-35.07274 Y16.24818
G01 X-35.03436 Y16.17937
G01 X-35.02374 Y16.15821
G01 X-34.96476 Y16.05712
G01 X-34.96369 Y16.05526
G01 X-34.96121 Y16.05102
G01 X-34.91305 Y15.97668
G01 X-34.89923 Y15.95747
G01 X-34.89529 Y15.95227
G01 X-34.83045 Y15.87355
G01 X-34.82963 Y15.87259
G01 X-34.82834 Y15.87101
G01 X-34.82392 Y15.86560
G01 X-34.76883 Y15.79748
G01 X-34.76202 Y15.78968
G01 X-34.75442 Y15.78089
G01 X-34.74035 Y15.76426
G01 X-34.73817 Y15.76159
G01 X-34.72664 Y15.74927
G01 X-34.67977 Y15.70269
G01 X-34.67568 Y15.69890
G01 X-34.67286 Y15.69631
G01 X-34.66659 Y15.69057
G01 X-34.66316 Y15.68745
G01 X-34.61488 Y15.64368
G01 X-34.60921 Y15.63909
G01 X-34.59580 Y15.62804
G01 X-34.58816 Y15.62158
G01 X-34.57358 Y15.60906
G01 X-34.55823 Y15.59560
G01 X-34.50614 Y15.55537
G01 X-34.49753 Y15.54861
G01 X-34.49316 Y15.54516
G01 X-34.48587 Y15.53931
G01 X-34.44495 Y15.50619
G01 X-34.43649 Y15.50012
G01 X-34.42506 Y15.49202
G01 X-34.41246 Y15.48326
G01 X-34.40568 Y15.47856
G01 X-34.39336 Y15.47018
G01 X-34.36309 Y15.45034
G01 X-34.36177 Y15.44952
G01 X-34.31869 Y15.42616
G01 X-34.30617 Y15.41922
G01 X-34.29987 Y15.41569
G01 X-34.28930 Y15.40965
G01 X-34.25864 Y15.39184
G01 X-34.22194 Y15.37322
G01 X-34.21020 Y15.36718
G01 X-34.20436 Y15.36408
G01 X-34.19423 Y15.35867
G01 X-34.14637 Y15.33271
G01 X-34.11749 Y15.31935
G01 X-34.10327 Y15.31259
G01 X-34.10302 Y15.31249
G01 X-34.09501 Y15.30863
G01 X-34.08038 Y15.30172
G01 X-34.06309 Y15.29377
G01 X-34.02814 Y15.28125
G01 X-34.02128 Y15.27896
G01 X-34.00799 Y15.27462
G01 X-34.00043 Y15.27213
G01 X-33.99570 Y15.27053
G01 X-33.98577 Y15.26715
G01 X-33.91843 Y15.24363
G01 X-33.90439 Y15.23970
G01 X-33.88577 Y15.23429
G01 X-33.87569 Y15.23124
G01 X-33.85544 Y15.22486
G01 X-33.85191 Y15.22390
G01 X-33.77454 Y15.20337
G01 X-33.77139 Y15.20246
G01 X-33.76791 Y15.20149
G01 X-33.73990 Y15.19370
G01 X-33.68176 Y15.17947
G01 X-33.66182 Y15.17653
G01 X-33.65321 Y15.17531
G01 X-33.64973 Y15.17482
G01 X-33.64650 Y15.17437
G01 X-33.54955 Y15.16416
G01 X-33.54340 Y15.16344
G01 X-33.43853 Y15.15166
G01 X-33.36045 Y15.14785
G01 X-33.27195 Y15.14785
G01 X-33.19380 Y15.15166
G01 X-33.09044 Y15.16327
G01 X-33.08112 Y15.16433
G01 X-33.02964 Y15.16972
G01 X-32.98590 Y15.17434
G01 X-32.98262 Y15.17482
G01 X-32.97914 Y15.17531
G01 X-32.97053 Y15.17653
G01 X-32.95062 Y15.17947
G01 X-32.89245 Y15.19370
G01 X-32.85938 Y15.20292
G01 X-32.85616 Y15.20378
G01 X-32.84958 Y15.20556
G01 X-32.77673 Y15.22489
G01 X-32.77523 Y15.22537
G01 X-32.75737 Y15.23101
G01 X-32.74727 Y15.23408
G01 X-32.72801 Y15.23970
G01 X-32.71407 Y15.24358
G01 X-32.70048 Y15.24833
G01 X-32.69992 Y15.24856
G01 X-32.64622 Y15.26728
G01 X-32.63947 Y15.26957
G01 X-32.63477 Y15.27117
G01 X-32.62438 Y15.27462
G01 X-32.61107 Y15.27896
G01 X-32.56939 Y15.29375
G01 X-32.55186 Y15.30177
G01 X-32.53797 Y15.30833
G01 X-32.52994 Y15.31219
G01 X-32.52908 Y15.31259
G01 X-32.51486 Y15.31935
G01 X-32.48595 Y15.33274
G01 X-32.43810 Y15.35867
G01 X-32.42725 Y15.36446
G01 X-32.42136 Y15.36756
G01 X-32.41049 Y15.37317
G01 X-32.37378 Y15.39179
G01 X-32.34305 Y15.40965
G01 X-32.33269 Y15.41562
G01 X-32.32644 Y15.41910
G01 X-32.31364 Y15.42618
G01 X-32.27053 Y15.44952
G01 X-32.26926 Y15.45034
G01 X-32.26083 Y15.45567
G01 X-32.23896 Y15.47018
G01 X-32.22636 Y15.47876
G01 X-32.21953 Y15.48348
G01 X-32.20736 Y15.49197
G01 X-32.19586 Y15.50012
G01 X-32.18745 Y15.50617
G01 X-32.14648 Y15.53931
G01 X-32.13919 Y15.54516
G01 X-32.13482 Y15.54861
G01 X-32.12621 Y15.55537
G01 X-32.07399 Y15.59573
G01 X-32.05852 Y15.60929
G01 X-32.04488 Y15.62100
G01 X-32.03723 Y15.62745
G01 X-32.02337 Y15.63891
G01 X-32.01757 Y15.64361
G01 X-32.01387 Y15.64696
G01 X-31.96919 Y15.68745
G01 X-31.96568 Y15.69065
G01 X-31.96111 Y15.69484
G01 X-31.95827 Y15.69743
G01 X-31.95252 Y15.70274
G01 X-31.93678 Y15.71765
G01 X-31.89273 Y15.76034
G01 X-31.89029 Y15.76301
G01 X-31.87554 Y15.77881
G01 X-31.86749 Y15.78729
G01 X-31.85296 Y15.80215
G01 X-31.22250 Y16.43258
G01 X-31.18763 Y16.46568
G01 X-31.16789 Y16.48341
G01 X-31.04440 Y16.57688
G01 X-31.01577 Y16.58143
G01 X-30.94590 Y16.59148
G01 X-30.81643 Y16.60078
G01 X-26.87247 Y16.60078
G01 X-26.77567 Y16.59560
G01 X-26.72297 Y16.58993
G01 X-26.55459 Y16.54947
G01 X-26.50001 Y16.50959
G01 X-26.44720 Y16.46382
G01 X-26.38294 Y16.39644
G01 X-26.35464 Y16.35237
G01 X-26.31756 Y16.22588
G01 X-26.30753 Y16.15603
G01 X-26.29821 Y16.02654
G01 X-26.29821 Y15.53268
G01 X-26.29948 Y15.48463
G01 X-26.30090 Y15.45816
G01 X-26.32211 Y15.30477
G01 X-26.33915 Y15.28128
G01 X-26.38147 Y15.22473
G01 X-26.46640 Y15.12664
G01 X-29.53698 Y12.05609
G01 X-29.56749 Y12.02403
G01 X-29.61123 Y11.97577
G01 X-29.74874 Y11.80577
G01 X-29.75482 Y11.79736
G01 X-29.80297 Y11.72304
G01 X-29.84552 Y11.64976
G01 X-29.86315 Y11.61938
G01 X-29.94206 Y11.46396
G01 X-29.96116 Y11.42396
G01 X-29.97592 Y11.38220
G01 X-30.03005 Y11.21646
G01 X-30.06078 Y11.10066
G01 X-30.06713 Y11.07526
G01 X-30.07927 Y11.01402
G01 X-30.08095 Y11.00376
G01 X-30.10391 Y10.78636
G01 X-30.10711 Y10.72126
G01 X-30.10821 Y10.67704
G01 X-30.10821 Y8.51647
G01 X-30.11341 Y8.41969
G01 X-30.11908 Y8.36699
G01 X-30.14796 Y8.24672
G01 X-30.15951 Y8.19866
G01 X-30.19929 Y8.14413
G01 X-30.24504 Y8.09132
G01 X-30.31247 Y8.02701
G01 X-30.35654 Y7.99869
G01 X-30.41354 Y7.98198
G01 X-30.48313 Y7.96158
G01 X-30.55301 Y7.95155
G01 X-30.68247 Y7.94222
G01 X-30.96352 Y7.94222
G01 X-31.08209 Y7.95005
G01 X-31.12189 Y7.95528
G01 X-31.12593 Y7.95574
G01 X-31.21191 Y7.99292
G01 X-31.29764 Y8.03346
G01 X-31.37942 Y8.06732
G01 X-31.45171 Y8.09320
G01 X-31.64188 Y8.14751
G01 X-31.68483 Y8.15863
G01 X-31.72875 Y8.16478
G01 X-31.92522 Y8.18739
G01 X-32.00195 Y8.19114
G01 X-32.09042 Y8.19114
G01 X-32.16713 Y8.18739
G01 X-32.36360 Y8.16478
G01 X-32.40752 Y8.15863
G01 X-32.45047 Y8.14751
G01 X-32.64064 Y8.09320
G01 X-32.71292 Y8.06732
G01 X-32.79471 Y8.03346
G01 X-32.88044 Y7.99292
G01 X-32.96642 Y7.95574
G01 X-32.97046 Y7.95528
G01 X-33.01026 Y7.95005
G01 X-33.12885 Y7.94222
G01 X-34.46352 Y7.94222
G01 X-34.58216 Y7.95005
G01 X-34.62194 Y7.95528
G01 X-34.62593 Y7.95574
G01 X-34.71190 Y7.99292
G01 X-34.79763 Y8.03346
G01 X-34.87942 Y8.06735
G01 X-34.95171 Y8.09320
G01 X-35.14190 Y8.14751
G01 X-35.18483 Y8.15863
G01 X-35.22877 Y8.16478
G01 X-35.42521 Y8.18739
G01 X-35.50195 Y8.19114
G01 X-35.59041 Y8.19114
G01 X-35.66712 Y8.18739
G01 X-35.86359 Y8.16478
G01 X-35.90751 Y8.15863
G01 X-35.95046 Y8.14751
G01 X-36.14063 Y8.09320
G01 X-36.21294 Y8.06732
G01 X-36.29471 Y8.03346
G01 X-36.36412 Y8.00062
G01 X-36.53702 Y7.90456
G01 X-36.57520 Y7.88208
G01 X-36.61066 Y7.85533
G01 X-36.76552 Y7.73242
G01 X-36.82247 Y7.68081
G01 X-36.88500 Y7.61827
G01 X-36.93656 Y7.56135
G01 X-37.05953 Y7.40646
G01 X-37.08625 Y7.37103
G01 X-37.10875 Y7.33278
G01 X-37.20484 Y7.15985
G01 X-37.23766 Y7.09049
G01 X-37.27149 Y7.00877
G01 X-37.29737 Y6.93646
G01 X-37.35168 Y6.74629
G01 X-37.36209 Y6.70639
G01 X-37.36275 Y6.70364
G01 X-37.36692 Y6.68975
G01 X-37.36963 Y6.68089
G01 X-37.37461 Y6.66519
G01 X-37.41830 Y6.53136
G01 X-37.44901 Y6.41561
G01 X-37.46750 Y6.32897
G01 X-37.46918 Y6.31871
G01 X-37.49214 Y6.10126
G01 X-37.49534 Y6.03621
G01 X-37.49534 Y5.94772
G01 X-37.49214 Y5.88272
G01 X-37.46918 Y5.66527
G01 X-37.46750 Y5.65501
G01 X-37.44901 Y5.56837
G01 X-37.41830 Y5.45264
G01 X-37.37461 Y5.31886
G01 X-37.36938 Y5.30230
G01 X-37.36463 Y5.28671
G01 X-37.36275 Y5.28033
G01 X-37.36209 Y5.27759
G01 X-37.35168 Y5.23768
G01 X-37.29737 Y5.04751
G01 X-37.27149 Y4.97520
G01 X-37.23766 Y4.89349
G01 X-37.20481 Y4.82407
G01 X-37.10875 Y4.65120
G01 X-37.08625 Y4.61295
G01 X-37.05953 Y4.57751
G01 X-36.93659 Y4.42262
G01 X-36.88500 Y4.36570
G01 X-36.82247 Y4.30317
G01 X-36.76552 Y4.25158
G01 X-36.61066 Y4.12864
G01 X-36.57520 Y4.10190
G01 X-36.53702 Y4.07942
G01 X-36.36412 Y3.98336
G01 X-36.29471 Y3.95051
G01 X-36.21294 Y3.91666
G01 X-36.14063 Y3.89077
G01 X-35.95046 Y3.83647
G01 X-35.90751 Y3.82534
G01 X-35.86359 Y3.81920
G01 X-35.66712 Y3.79659
G01 X-35.59041 Y3.79283
G01 X-35.50195 Y3.79283
G01 X-35.42521 Y3.79659
G01 X-35.22877 Y3.81920
G01 X-35.18483 Y3.82534
G01 X-35.14190 Y3.83647
G01 X-34.95171 Y3.89077
G01 X-34.87942 Y3.91663
G01 X-34.79763 Y3.95051
G01 X-34.71190 Y3.99105
G01 X-34.62593 Y4.02824
G01 X-34.62194 Y4.02869
G01 X-34.58216 Y4.03393
G01 X-34.46352 Y4.04172
G01 X-33.12885 Y4.04172
G01 X-33.01026 Y4.03393
G01 X-32.97046 Y4.02869
G01 X-32.96642 Y4.02824
G01 X-32.88044 Y3.99105
G01 X-32.79471 Y3.95051
G01 X-32.71292 Y3.91666
G01 X-32.64064 Y3.89077
G01 X-32.45047 Y3.83647
G01 X-32.40752 Y3.82534
G01 X-32.36360 Y3.81920
G01 X-32.16713 Y3.79659
G01 X-32.09042 Y3.79283
G01 X-32.00195 Y3.79283
G01 X-31.92522 Y3.79659
G01 X-31.72875 Y3.81920
G01 X-31.68483 Y3.82534
G01 X-31.64188 Y3.83647
G01 X-31.45171 Y3.89077
G01 X-31.37942 Y3.91666
G01 X-31.29764 Y3.95051
G01 X-31.21191 Y3.99105
G01 X-31.12593 Y4.02824
G01 X-31.12189 Y4.02869
G01 X-31.08209 Y4.03393
G01 X-30.96352 Y4.04172
G01 X-29.62883 Y4.04172
G01 X-29.51019 Y4.03393
G01 X-29.47041 Y4.02869
G01 X-29.46642 Y4.02824
G01 X-29.38044 Y3.99105
G01 X-29.29472 Y3.95051
G01 X-29.21293 Y3.91663
G01 X-29.14064 Y3.89077
G01 X-28.95045 Y3.83647
G01 X-28.90752 Y3.82534
G01 X-28.86358 Y3.81920
G01 X-28.66711 Y3.79659
G01 X-28.59040 Y3.79283
G01 X-28.50193 Y3.79283
G01 X-28.42523 Y3.79659
G01 X-28.22876 Y3.81920
G01 X-28.18484 Y3.82534
G01 X-28.14189 Y3.83647
G01 X-27.95169 Y3.89077
G01 X-27.87941 Y3.91663
G01 X-27.79960 Y3.94957
G01 X-27.72823 Y3.98333
G01 X-27.55533 Y4.07942
G01 X-27.51713 Y4.10190
G01 X-27.48169 Y4.12864
G01 X-27.32680 Y4.25158
G01 X-27.26988 Y4.30317
G01 X-27.20735 Y4.36570
G01 X-27.15576 Y4.42260
G01 X-27.03282 Y4.57751
G01 X-27.00610 Y4.61295
G01 X-26.98360 Y4.65120
G01 X-26.88754 Y4.82404
G01 X-26.87725 Y4.84579
G01 X-26.85335 Y4.89275
G01 X-26.83592 Y4.92465
G01 X-26.82482 Y4.94563
G01 X-26.80902 Y4.96489
G01 X-26.77816 Y5.00057
G01 X-26.75005 Y5.03144
G01 X-26.74837 Y5.03326
G01 X-26.70468 Y5.08150
G01 X-26.66826 Y5.12651
G01 X-26.56714 Y5.25150
G01 X-26.56107 Y5.25991
G01 X-26.51870 Y5.32437
G01 X-26.51289 Y5.33425
G01 X-26.45276 Y5.43781
G01 X-26.37380 Y5.59333
G01 X-26.35475 Y5.63324
G01 X-26.34184 Y5.66936
G01 X-26.33994 Y5.67515
G01 X-26.28584 Y5.84083
G01 X-26.25510 Y5.95668
G01 X-26.23661 Y6.04324
G01 X-26.23493 Y6.05351
G01 X-26.21197 Y6.27093
G01 X-26.20877 Y6.33595
G01 X-26.20771 Y6.38020
G01 X-26.20771 Y9.63135
G01 X-26.20641 Y9.67936
G01 X-26.20499 Y9.70587
G01 X-26.18378 Y9.85932
G01 X-26.16671 Y9.88286
G01 X-26.12439 Y9.93938
G01 X-26.03951 Y10.03739
G01 X-22.96890 Y13.10800
G01 X-22.93839 Y13.14006
G01 X-22.89466 Y13.18832
G01 X-22.78455 Y13.32441
G01 X-22.75717 Y13.35827
G01 X-22.75107 Y13.36672
G01 X-22.71300 Y13.42410
G01 X-22.70291 Y13.44105
G01 X-22.68785 Y13.46700
G01 X-22.64276 Y13.54463
G01 X-22.56382 Y13.70013
G01 X-22.54477 Y13.74005
G01 X-22.53850 Y13.75700
G01 X-22.52996 Y13.78189
G01 X-22.47584 Y13.94767
G01 X-22.44510 Y14.06345
G01 X-22.42661 Y14.15006
G01 X-22.42493 Y14.16032
G01 X-22.40197 Y14.37775
G01 X-22.39877 Y14.44277
G01 X-22.39771 Y14.48702
G01 X-22.39771 Y17.61973
G01 X-22.39448 Y17.69567
G01 X-22.39097 Y17.73723
G01 X-22.39011 Y17.74716
G01 X-22.38455 Y17.76235
G01 X-22.36682 Y17.80977
G01 X-22.35470 Y17.84431
G01 X-22.35412 Y17.84602
G01 X-22.30004 Y18.01172
G01 X-22.26928 Y18.12757
G01 X-22.25079 Y18.21419
G01 X-22.24917 Y18.22430
G01 X-22.22620 Y18.44172
G01 X-22.22300 Y18.50690
G01 X-22.22300 Y18.59539
G01 X-22.22620 Y18.66034
G01 X-22.24917 Y18.87779
G01 X-22.25087 Y18.88813
G01 X-22.26933 Y18.97474
G01 X-22.30004 Y19.09036
G01 X-22.35422 Y19.25625
G01 X-22.36895 Y19.29793
G01 X-22.38810 Y19.33801
G01 X-22.41894 Y19.39877
G01 X-22.46974 Y19.49884
G01 X-22.50941 Y19.58858
G01 X-22.50997 Y19.59343
G01 X-22.51620 Y19.64860
G01 X-22.52194 Y19.75018
G01 X-22.52194 Y19.75104
G01 X-22.52305 Y19.79635
G01 X-22.52504 Y19.81586
G01 X-22.55066 Y19.91284
G01 X-22.59351 Y19.99694
G01 X-22.65292 Y20.07027
G01 X-22.72625 Y20.12968
G01 X-22.81035 Y20.17253
G01 X-22.90741 Y20.19818
G01 X-22.92691 Y20.20014
G01 X-22.97218 Y20.20128
G01 X-22.97304 Y20.20128
G01 X-23.07441 Y20.20700
G01 X-23.12958 Y20.21319
G01 X-23.13453 Y20.21378
G01 X-23.22442 Y20.25350
G01 X-23.38528 Y20.33516
G01 X-23.42526 Y20.35426
G01 X-23.46710 Y20.36905
G01 X-23.63283 Y20.42315
G01 X-23.74863 Y20.45388
G01 X-23.83522 Y20.47237
G01 X-23.84545 Y20.47405
G01 X-24.06290 Y20.49701
G01 X-24.12793 Y20.50021
G01 X-24.17220 Y20.50131
G01 X-31.86213 Y20.50131
G01 X-31.90640 Y20.50021
G01 X-31.97140 Y20.49701
G01 X-32.18885 Y20.47405
G01 X-32.19911 Y20.47237
G01 X-32.28572 Y20.45388
G01 X-32.40147 Y20.42315
G01 X-32.56728 Y20.36902
G01 X-32.60904 Y20.35424
G01 X-32.64904 Y20.33516
G01 X-32.80454 Y20.25620
G01 X-32.90812 Y20.19607
G01 X-32.98244 Y20.14792
G01 X-32.99090 Y20.14182
G01 X-33.06504 Y20.08185
G01 X-33.16085 Y20.00433
G01 X-33.17962 Y19.98734
G01 X-33.20967 Y19.96128
G01 X-33.24394 Y19.93285
G01 X-33.25392 Y19.92470
G01 X-33.29519 Y19.89143
G01 X-33.40066 Y19.82678
G01 X-33.58783 Y19.63964
G01 X-33.77566 Y19.82747
G01 X-33.83934 Y19.86227
G01 X-33.89583 Y19.90458
G01 X-33.99387 Y19.98947
G01 X-34.62349 Y20.61909
G01 X-34.65676 Y20.65419
G01 X-34.67449 Y20.67395
G01 X-34.76778 Y20.79722
G01 X-34.77233 Y20.82579
G01 X-34.78239 Y20.89567
G01 X-34.79171 Y21.02513
G01 X-34.79171 Y21.73778
G01 X-34.79062 Y21.78172
G01 X-34.78945 Y21.80572
G01 X-34.76359 Y21.98215
G01 X-34.75194 Y22.02990
G01 X-34.74175 Y22.04951
G01 X-34.69110 Y22.12779
G01 X-34.62654 Y22.19503
G01 X-34.55044 Y22.24885
G01 X-34.48981 Y22.28357
G01 X-34.40495 Y22.32195
G01 X-34.31437 Y22.34362
G01 X-34.25239 Y22.34636
G01 X-34.24447 Y22.34489
G01 X-34.24444 Y22.34489
G01 X-34.22171 Y22.34072
G01 X-34.15272 Y22.32155
G01 X-34.10606 Y22.30730
G01 X-34.02737 Y22.28098
G01 X-34.00787 Y22.27458
G01 X-34.00040 Y22.27212
G01 X-33.99568 Y22.27054
G01 X-33.98582 Y22.26716
G01 X-33.91838 Y22.24362
G01 X-33.90431 Y22.23968
G01 X-33.88541 Y22.23417
G01 X-33.87528 Y22.23110
G01 X-33.85674 Y22.22525
G01 X-33.85542 Y22.22482
G01 X-33.78267 Y22.20552
G01 X-33.77871 Y22.20445
G01 X-33.77564 Y22.20364
G01 X-33.76774 Y22.20145
G01 X-33.73992 Y22.19366
G01 X-33.68206 Y22.17951
G01 X-33.66184 Y22.17651
G01 X-33.64973 Y22.17481
G01 X-33.64615 Y22.17430
G01 X-33.59159 Y22.16856
G01 X-33.54922 Y22.16409
G01 X-33.54770 Y22.16391
G01 X-33.54338 Y22.16346
G01 X-33.43855 Y22.15167
G01 X-33.36040 Y22.14784
G01 X-33.27198 Y22.14784
G01 X-33.19380 Y22.15167
G01 X-33.08897 Y22.16346
G01 X-33.08465 Y22.16391
G01 X-33.08313 Y22.16409
G01 X-33.08135 Y22.16427
G01 X-33.03525 Y22.16915
G01 X-32.98615 Y22.17433
G01 X-32.98262 Y22.17481
G01 X-32.97051 Y22.17651
G01 X-32.95024 Y22.17951
G01 X-32.89243 Y22.19366
G01 X-32.85938 Y22.20290
G01 X-32.85616 Y22.20377
G01 X-32.84958 Y22.20554
G01 X-32.77693 Y22.22482
G01 X-32.77561 Y22.22525
G01 X-32.75636 Y22.23132
G01 X-32.74625 Y22.23437
G01 X-32.72806 Y22.23966
G01 X-32.71679 Y22.24283
G01 X-32.71409 Y22.24357
G01 X-32.64653 Y22.26716
G01 X-32.63667 Y22.27054
G01 X-32.62448 Y22.27461
G01 X-32.61102 Y22.27900
G01 X-32.56924 Y22.29378
G01 X-32.55217 Y22.30163
G01 X-32.53843 Y22.30813
G01 X-32.53040 Y22.31197
G01 X-32.52910 Y22.31258
G01 X-32.51468 Y22.31944
G01 X-32.48590 Y22.33277
G01 X-32.43810 Y22.35868
G01 X-32.42862 Y22.36374
G01 X-32.42273 Y22.36683
G01 X-32.41049 Y22.37316
G01 X-32.37371 Y22.39185
G01 X-32.34295 Y22.40968
G01 X-32.33198 Y22.41596
G01 X-32.32570 Y22.41949
G01 X-32.31361 Y22.42617
G01 X-32.27061 Y22.44949
G01 X-32.26929 Y22.45030
G01 X-32.23916 Y22.47001
G01 X-32.22669 Y22.47854
G01 X-32.21981 Y22.48327
G01 X-32.20754 Y22.49183
G01 X-32.19583 Y22.50013
G01 X-32.19446 Y22.50112
G01 X-32.19395 Y22.50148
G01 X-32.18730 Y22.50628
G01 X-32.14648 Y22.53930
G01 X-32.13919 Y22.54514
G01 X-32.13482 Y22.54860
G01 X-32.12613 Y22.55540
G01 X-32.07411 Y22.59559
G01 X-32.07104 Y22.59828
G01 X-32.05870 Y22.60912
G01 X-32.04488 Y22.62101
G01 X-32.03723 Y22.62746
G01 X-32.02311 Y22.63912
G01 X-32.01747 Y22.64367
G01 X-31.96916 Y22.68746
G01 X-31.96581 Y22.69051
G01 X-31.96121 Y22.69472
G01 X-31.95250 Y22.70275
G01 X-31.90571 Y22.74928
G01 X-31.89410 Y22.76168
G01 X-31.89187 Y22.76439
G01 X-31.87833 Y22.78042
G01 X-31.87071 Y22.78924
G01 X-31.86362 Y22.79736
G01 X-31.80843 Y22.86559
G01 X-31.80391 Y22.87113
G01 X-31.73698 Y22.95235
G01 X-31.73325 Y22.95731
G01 X-31.71930 Y22.97669
G01 X-31.67114 Y23.05098
G01 X-31.67064 Y23.05187
G01 X-31.66746 Y23.05731
G01 X-31.60861 Y23.15820
G01 X-31.59985 Y23.17562
G01 X-31.56147 Y23.24451
G01 X-31.55895 Y23.24857
G01 X-31.53447 Y23.27768
G01 X-31.48176 Y23.33516
G01 X-29.33711 Y25.47978
G01 X-29.26498 Y25.54458
G01 X-29.22368 Y25.57785
G01 X-29.11811 Y25.64252
G01 X-28.93104 Y25.82962
G01 X-28.74331 Y25.64186
G01 X-28.67961 Y25.60706
G01 X-28.62309 Y25.56472
G01 X-28.60356 Y25.54968
G01 X-28.56848 Y25.52195
G01 X-28.52210 Y25.48268
G01 X-28.51890 Y25.47976
G01 X-28.34890 Y25.34222
G01 X-28.34052 Y25.33617
G01 X-28.26617 Y25.28799
G01 X-28.16262 Y25.22786
G01 X-28.00709 Y25.14892
G01 X-27.96706 Y25.12982
G01 X-27.92533 Y25.11504
G01 X-27.75952 Y25.06091
G01 X-27.64380 Y25.03018
G01 X-27.55718 Y25.01169
G01 X-27.54692 Y25.01001
G01 X-27.32947 Y24.98707
G01 X-27.26445 Y24.98387
G01 X-27.22020 Y24.98278
G01 X-26.88797 Y24.98278
G01 X-26.84372 Y24.98387
G01 X-26.77865 Y24.98707
G01 X-26.56122 Y25.01001
G01 X-26.55096 Y25.01169
G01 X-26.46432 Y25.03018
G01 X-26.34855 Y25.06094
G01 X-26.30903 Y25.07381
G01 X-26.18279 Y25.11504
G01 X-26.14106 Y25.12982
G01 X-26.10103 Y25.14892
G01 X-25.94555 Y25.22786
G01 X-25.84195 Y25.28799
G01 X-25.76762 Y25.33617
G01 X-25.75922 Y25.34222
G01 X-25.58924 Y25.47973
G01 X-25.54096 Y25.52350
G01 X-25.47840 Y25.58606
G01 X-25.43468 Y25.63429
G01 X-25.29714 Y25.80429
G01 X-25.29107 Y25.81273
G01 X-25.24291 Y25.88705
G01 X-25.18279 Y25.99063
G01 X-25.10382 Y26.14613
G01 X-25.08475 Y26.18610
G01 X-25.06996 Y26.22789
G01 X-25.01584 Y26.39365
G01 X-24.98510 Y26.50942
G01 X-24.96661 Y26.59606
G01 X-24.96493 Y26.60632
G01 X-24.94197 Y26.82375
G01 X-24.93877 Y26.88877
G01 X-24.93877 Y26.97726
G01 X-24.94197 Y27.04229
G01 X-24.96493 Y27.25974
G01 X-24.96661 Y27.27002
G01 X-24.98510 Y27.35664
G01 X-25.01584 Y27.47239
G01 X-25.06996 Y27.63820
G01 X-25.08475 Y27.67996
G01 X-25.10382 Y27.71996
G01 X-25.18279 Y27.87546
G01 X-25.24291 Y27.97904
G01 X-25.26869 Y28.02080
G01 X-25.29041 Y28.05392
G01 X-25.31962 Y28.10160
G01 X-25.34555 Y28.14688
G01 X-25.37743 Y28.21793
G01 X-25.44852 Y28.30454
G01 X-25.51644 Y28.37246
G01 X-25.74375 Y28.55900
G01 X-25.76064 Y28.57030
G01 X-25.82361 Y28.61236
G01 X-26.03521 Y28.72547
G01 X-25.72381 Y29.03690
G01 X-25.69930 Y29.02674
G01 X-25.34289 Y28.91861
G01 X-25.24868 Y28.89989
G01 X-25.02539 Y28.87790
G01 X-24.98327 Y28.88770
G01 X-24.91241 Y28.89435
G01 X-24.87464 Y28.89712
G01 X-24.82996 Y28.89951
G01 X-24.78208 Y28.90078
G01 X-23.32996 Y28.90078
G01 X-23.28571 Y28.90187
G01 X-23.19826 Y28.90617
G01 X-22.93626 Y28.93383
G01 X-22.91495 Y28.93728
G01 X-22.82831 Y28.95577
G01 X-22.68005 Y28.99514
G01 X-22.47164 Y29.06319
G01 X-22.42986 Y29.07797
G01 X-22.38981 Y29.09707
G01 X-22.19435 Y29.19631
G01 X-22.06169 Y29.27332
G01 X-21.98737 Y29.32151
G01 X-21.96984 Y29.33410
G01 X-21.76499 Y29.49984
G01 X-21.70012 Y29.55864
G01 X-21.63756 Y29.62120
G01 X-21.57876 Y29.68607
G01 X-21.41305 Y29.89090
G01 X-21.40043 Y29.90842
G01 X-21.35227 Y29.98274
G01 X-21.28358 Y30.10106
G01 X-21.27528 Y30.11538
G01 X-21.17602 Y30.31089
G01 X-21.15689 Y30.35092
G01 X-21.14211 Y30.39273
G01 X-21.07406 Y30.60111
G01 X-21.03472 Y30.74937
G01 X-21.01622 Y30.83601
G01 X-21.01274 Y30.85734
G01 X-20.98508 Y31.11934
G01 X-20.98079 Y31.20680
G01 X-20.98079 Y31.29526
G01 X-20.98508 Y31.38272
G01 X-21.01274 Y31.64472
G01 X-21.01622 Y31.66603
G01 X-21.03472 Y31.75267
G01 X-21.07406 Y31.90093
G01 X-21.14211 Y32.10933
G01 X-21.15689 Y32.15114
G01 X-21.17602 Y32.19120
G01 X-21.22699 Y32.29163
G01 X-21.25618 Y32.35495
G01 X-21.27073 Y32.39003
G01 X-21.31582 Y32.52998
G01 X-21.31368 Y32.59465
G01 X-21.30373 Y32.66382
G01 X-21.28176 Y32.75429
G01 X-21.24310 Y32.83900
G01 X-21.18910 Y32.91484
G01 X-21.14335 Y32.96765
G01 X-21.07591 Y33.03194
G01 X-21.03446 Y33.05861
G01 X-20.97325 Y33.07697
G01 X-20.90530 Y33.09737
G01 X-20.83543 Y33.10743
G01 X-20.70596 Y33.11672
G01 X-19.55397 Y33.11672
G01 X-19.48488 Y33.11408
G01 X-19.44709 Y33.11119
G01 X-19.26774 Y33.07697
G01 X-19.26769 Y33.07697
G01 X-19.24028 Y33.07174
G01 X-19.17046 Y33.05045
G01 X-18.86662 Y32.90898
G01 X-18.87084 Y32.87619
G01 X-18.88222 Y32.79513
G01 X-18.91410 Y32.63839
G01 X-18.94132 Y32.53844
G01 X-18.94160 Y32.53745
G01 X-18.94386 Y32.53003
G01 X-18.95923 Y32.47977
G01 X-18.98199 Y32.41271
G01 X-19.03287 Y32.29168
G01 X-19.07848 Y32.20182
G01 X-19.08389 Y32.19120
G01 X-19.10302 Y32.15112
G01 X-19.11778 Y32.10933
G01 X-19.18582 Y31.90095
G01 X-19.22519 Y31.75267
G01 X-19.24366 Y31.66603
G01 X-19.24717 Y31.64469
G01 X-19.27483 Y31.38272
G01 X-19.27912 Y31.29526
G01 X-19.27912 Y31.20680
G01 X-19.27483 Y31.11934
G01 X-19.24717 Y30.85734
G01 X-19.24366 Y30.83601
G01 X-19.22519 Y30.74937
G01 X-19.18582 Y30.60111
G01 X-19.11778 Y30.39273
G01 X-19.10300 Y30.35089
G01 X-19.08389 Y30.31089
G01 X-18.98463 Y30.11543
G01 X-18.90764 Y29.98274
G01 X-18.85946 Y29.90842
G01 X-18.84681 Y29.89090
G01 X-18.68115 Y29.68605
G01 X-18.62235 Y29.62120
G01 X-18.55979 Y29.55864
G01 X-18.49492 Y29.49987
G01 X-18.29004 Y29.33410
G01 X-18.27254 Y29.32151
G01 X-18.19820 Y29.27332
G01 X-18.06553 Y29.19631
G01 X-17.87010 Y29.09707
G01 X-17.83000 Y29.07797
G01 X-17.78827 Y29.06319
G01 X-17.57983 Y28.99514
G01 X-17.43160 Y28.95577
G01 X-17.34496 Y28.93728
G01 X-17.32365 Y28.93383
G01 X-17.06165 Y28.90617
G01 X-16.97420 Y28.90187
G01 X-16.92997 Y28.90078
G01 X-15.92657 Y28.90078
G01 X-15.81974 Y28.89446
G01 X-15.76175 Y28.88757
G01 X-15.65896 Y28.86100
G01 X-15.65888 Y28.86100
G01 X-15.60011 Y28.84582
G01 X-15.53346 Y28.79293
G01 X-15.48271 Y28.74493
G01 X-15.42147 Y28.67482
G01 X-15.37458 Y28.59438
G01 X-15.34377 Y28.50655
G01 X-15.32701 Y28.43873
G01 X-15.31832 Y28.38011
G01 X-15.28177 Y28.40452
G01 X-15.06567 Y28.52001
G01 X-14.97692 Y28.55679
G01 X-14.74242 Y28.62791
G01 X-14.64822 Y28.64665
G01 X-14.40435 Y28.67068
G01 X-14.35634 Y28.67302
G01 X-14.18797 Y28.67302
G01 X-14.13994 Y28.67068
G01 X-13.89607 Y28.64665
G01 X-13.80186 Y28.62791
G01 X-13.56737 Y28.55679
G01 X-13.47862 Y28.52001
G01 X-13.43224 Y28.49524
G01 X-13.43684 Y28.50525
G01 X-13.46732 Y28.59334
G01 X-13.48058 Y28.68559
G01 X-13.47613 Y28.77868
G01 X-13.46618 Y28.84785
G01 X-13.44421 Y28.93832
G01 X-13.40555 Y29.02303
G01 X-13.35155 Y29.09888
G01 X-13.30580 Y29.15168
G01 X-13.23836 Y29.21597
G01 X-13.19686 Y29.24266
G01 X-13.13567 Y29.26103
G01 X-13.06775 Y29.28143
G01 X-12.99790 Y29.29146
G01 X-12.86841 Y29.30078
G01 X-11.01713 Y29.30078
G01 X-10.96870 Y29.29948
G01 X-10.94218 Y29.29806
G01 X-10.76024 Y29.26994
G01 X-10.75849 Y29.26949
G01 X-10.70504 Y29.22524
G01 X-10.60962 Y29.13405
G01 X-10.59575 Y29.11876
G01 X-10.56522 Y29.08671
G01 X-9.47266 Y27.99415
G01 X-8.34452 Y26.86604
G01 X-8.32367 Y26.84447
G01 X-8.31259 Y26.83264
G01 X-8.29311 Y26.81112
G01 X-8.29171 Y26.80952
G01 X-8.25186 Y26.75931
G01 X-8.19524 Y26.68798
G01 X-8.19100 Y26.68275
G01 X-8.16073 Y26.64328
G01 X-8.15905 Y26.64099
G01 X-8.13009 Y26.60312
G01 X-8.10269 Y26.56914
G01 X-8.06370 Y26.50896
G01 X-8.04747 Y26.48389
G01 X-8.04295 Y26.47023
G01 X-8.03055 Y26.39035
G01 X-8.02557 Y26.32065
G01 X-8.02781 Y26.22753
G01 X-8.04759 Y26.13655
G01 X-8.08425 Y26.05093
G01 X-8.11772 Y25.98961
G01 X-8.20132 Y25.87793
G01 X-8.31678 Y25.76248
G01 X-8.45755 Y25.58598
G01 X-8.57764 Y25.39482
G01 X-8.59392 Y25.36104
G01 X-8.44863 Y25.36104
G01 X-8.41188 Y25.42979
G01 X-8.35852 Y25.50965
G01 X-8.18442 Y25.72182
G01 X-8.11648 Y25.78974
G01 X-7.90434 Y25.96385
G01 X-7.82448 Y26.01722
G01 X-7.81729 Y26.02106
G01 X-7.78567 Y26.04699
G01 X-7.70581 Y26.10035
G01 X-7.57360 Y26.17102
G01 X-6.64148 Y26.17102
G01 X-6.61689 Y26.17043
G01 X-6.32283 Y26.15598
G01 X-6.27036 Y26.15080
G01 X-6.05415 Y26.11872
G01 X-5.81173 Y26.10681
G01 X-5.74958 Y26.10068
G01 X-5.58999 Y26.07701
G01 X-5.48842 Y26.01613
G01 X-5.43701 Y25.98181
G01 X-5.21415 Y25.81651
G01 X-5.17460 Y25.78407
G01 X-4.97099 Y25.59954
G01 X-4.93716 Y25.56571
G01 X-4.75263 Y25.36210
G01 X-4.72019 Y25.32256
G01 X-4.55489 Y25.09970
G01 X-4.53439 Y25.07033
G01 X-4.53018 Y25.04537
G01 X-4.48949 Y24.77092
G01 X-4.48441 Y24.71959
G01 X-4.47092 Y24.44514
G01 X-4.47092 Y24.39690
G01 X-4.48441 Y24.12246
G01 X-4.48949 Y24.07112
G01 X-4.53018 Y23.79668
G01 X-4.54234 Y23.73564
G01 X-4.61110 Y23.46119
G01 X-4.63482 Y23.38324
G01 X-4.68321 Y23.24796
G01 X-4.68321 Y22.06407
G01 X-4.67524 Y21.94413
G01 X-4.67524 Y17.71167
G01 X-4.67574 Y17.68104
G01 X-4.67633 Y17.66423
G01 X-4.69642 Y17.50205
G01 X-4.70292 Y17.47159
G01 X-4.72751 Y17.43944
G01 X-4.75758 Y17.40207
G01 X-4.81186 Y17.33801
G01 X-4.81550 Y17.33370
G01 X-4.89355 Y17.24048
G01 X-4.90810 Y17.22311
G01 X-4.90973 Y17.22079
G01 X-4.95748 Y17.14619
G01 X-5.00574 Y17.06202
G01 X-5.02339 Y17.02460
G01 X-5.02715 Y17.01670
G01 X-5.06096 Y16.93507
G01 X-5.07783 Y16.88795
G01 X-5.10328 Y16.79428
G01 X-5.12225 Y16.70764
G01 X-5.12273 Y16.70492
G01 X-5.13520 Y16.56413
G01 X-5.13533 Y16.56121
G01 X-5.13642 Y16.51701
G01 X-5.13642 Y14.51699
G01 X-5.13533 Y14.47277
G01 X-5.13520 Y14.46987
G01 X-5.12273 Y14.32908
G01 X-5.12225 Y14.32636
G01 X-5.10328 Y14.23972
G01 X-5.07783 Y14.14602
G01 X-5.06096 Y14.09891
G01 X-5.02715 Y14.01727
G01 X-5.00577 Y13.97203
G01 X-4.95989 Y13.89197
G01 X-4.95751 Y13.88778
G01 X-4.91435 Y13.81156
G01 X-4.91351 Y13.81006
G01 X-4.88923 Y13.76733
G01 X-4.84425 Y13.67752
G01 X-4.84001 Y13.65890
G01 X-4.84247 Y13.53932
G01 X-4.85243 Y13.47015
G01 X-4.87440 Y13.37963
G01 X-4.91311 Y13.29492
G01 X-4.96713 Y13.21905
G01 X-5.01288 Y13.16627
G01 X-5.08029 Y13.10201
G01 X-5.15865 Y13.05166
G01 X-5.16144 Y13.05052
G01 X-5.18296 Y13.04668
G01 X-5.25032 Y13.03480
G01 X-5.26523 Y13.03338
G01 X-5.31115 Y13.02794
G01 X-5.32070 Y13.02657
G01 X-5.45022 Y13.01725
G01 X-6.22174 Y13.01725
G01 X-6.23726 Y13.01737
G01 X-6.24610 Y13.01753
G01 X-6.39306 Y13.03205
G01 X-6.46291 Y13.04465
G01 X-6.49911 Y13.05697
G01 X-6.55311 Y13.07536
G01 X-6.62558 Y13.12959
G01 X-6.68824 Y13.19850
G01 X-6.73012 Y13.25443
G01 X-6.77864 Y13.33401
G01 X-6.81122 Y13.42134
G01 X-6.82667 Y13.51323
G01 X-6.83165 Y13.58293
G01 X-6.82578 Y13.66462
G01 X-6.82811 Y13.66477
G01 X-6.82618 Y13.69748
G01 X-6.82618 Y14.57701
G01 X-6.94620 Y14.57701
G01 X-6.94620 Y13.76698
G01 X-6.95560 Y13.67137
G01 X-6.98349 Y13.57945
G01 X-7.02877 Y13.49474
G01 X-7.08971 Y13.42050
G01 X-7.16395 Y13.35956
G01 X-7.24866 Y13.31427
G01 X-7.34059 Y13.28638
G01 X-7.43619 Y13.27699
G01 X-8.24617 Y13.27699
G01 X-8.24617 Y12.87823
G01 X-8.20487 Y12.79606
G01 X-8.17957 Y12.73094
G01 X-8.15425 Y12.64130
G01 X-8.14635 Y12.54849
G01 X-8.15001 Y12.51387
G01 X-8.15212 Y12.50767
G01 X-8.16050 Y12.48326
G01 X-8.17127 Y12.45893
G01 X-8.19649 Y12.39611
G01 X-8.19761 Y12.39302
G01 X-8.25041 Y12.27374
G01 X-8.26835 Y12.24001
G01 X-8.27736 Y12.22258
G01 X-8.30129 Y12.15779
G01 X-8.34137 Y12.03503
G01 X-8.35151 Y11.99378
G01 X-8.36835 Y11.90694
G01 X-8.37851 Y11.83610
G01 X-8.38379 Y11.76792
G01 X-8.38534 Y11.73622
G01 X-8.38643 Y11.69198
G01 X-8.38643 Y9.94197
G01 X-8.38534 Y9.89772
G01 X-8.38379 Y9.86605
G01 X-8.37851 Y9.79787
G01 X-8.36873 Y9.72967
G01 X-8.36835 Y9.72706
G01 X-8.35151 Y9.64024
G01 X-8.34137 Y9.59897
G01 X-8.30129 Y9.47621
G01 X-8.27736 Y9.41139
G01 X-8.26832 Y9.39394
G01 X-8.18780 Y9.24248
G01 X-8.18442 Y9.23620
G01 X-8.13738 Y9.16978
G01 X-8.06560 Y9.07758
G01 X-8.02880 Y9.03696
G01 X-7.96621 Y8.97438
G01 X-7.92557 Y8.93752
G01 X-7.83342 Y8.86579
G01 X-7.76695 Y8.81873
G01 X-7.76060 Y8.81530
G01 X-7.60914 Y8.73481
G01 X-7.59179 Y8.72581
G01 X-7.52702 Y8.70189
G01 X-7.40421 Y8.66178
G01 X-7.36301 Y8.65167
G01 X-7.27612 Y8.63481
G01 X-7.20536 Y8.62465
G01 X-7.13718 Y8.61939
G01 X-7.10541 Y8.61781
G01 X-7.06119 Y8.61672
G01 X-5.31118 Y8.61672
G01 X-5.26690 Y8.61781
G01 X-5.23523 Y8.61939
G01 X-5.16703 Y8.62465
G01 X-5.09624 Y8.63481
G01 X-5.00937 Y8.65167
G01 X-4.96812 Y8.66181
G01 X-4.84531 Y8.70189
G01 X-4.78057 Y8.72581
G01 X-4.76317 Y8.73483
G01 X-4.61171 Y8.81532
G01 X-4.60541 Y8.81870
G01 X-4.53897 Y8.86577
G01 X-4.44679 Y8.93752
G01 X-4.40615 Y8.97435
G01 X-4.34354 Y9.03696
G01 X-4.30671 Y9.07760
G01 X-4.23495 Y9.16978
G01 X-4.18791 Y9.23620
G01 X-4.18451 Y9.24253
G01 X-4.17948 Y9.25200
G01 X-4.10402 Y9.39399
G01 X-4.09500 Y9.41139
G01 X-4.07107 Y9.47621
G01 X-4.03099 Y9.59897
G01 X-4.02086 Y9.64024
G01 X-4.00402 Y9.72706
G01 X-3.99386 Y9.79785
G01 X-3.98857 Y9.86607
G01 X-3.98702 Y9.89772
G01 X-3.98593 Y9.94197
G01 X-3.98593 Y11.69198
G01 X-3.98702 Y11.73622
G01 X-3.98857 Y11.76797
G01 X-3.99383 Y11.83604
G01 X-4.00402 Y11.90694
G01 X-4.02086 Y11.99378
G01 X-4.03099 Y12.03500
G01 X-4.07107 Y12.15779
G01 X-4.09500 Y12.22258
G01 X-4.10399 Y12.23996
G01 X-4.18448 Y12.39142
G01 X-4.18789 Y12.39777
G01 X-4.18944 Y12.40015
G01 X-4.23234 Y12.46642
G01 X-4.24994 Y12.49474
G01 X-4.28131 Y12.54727
G01 X-4.31915 Y12.61707
G01 X-4.32947 Y12.63810
G01 X-4.33810 Y12.70785
G01 X-4.33343 Y12.79446
G01 X-4.32350 Y12.86363
G01 X-4.30153 Y12.95423
G01 X-4.26282 Y13.03901
G01 X-4.20874 Y13.11493
G01 X-4.16297 Y13.16774
G01 X-4.09556 Y13.23200
G01 X-4.02185 Y13.27935
G01 X-4.01075 Y13.28194
G01 X-3.98329 Y13.28837
G01 X-3.93620 Y13.29571
G01 X-3.92502 Y13.29738
G01 X-3.85517 Y13.30742
G01 X-3.72568 Y13.31674
G01 X-2.43618 Y13.31674
G01 X-2.39195 Y13.31783
G01 X-2.38906 Y13.31796
G01 X-2.24824 Y13.33043
G01 X-2.24552 Y13.33091
G01 X-2.15891 Y13.34988
G01 X-2.06521 Y13.37534
G01 X-2.01809 Y13.39220
G01 X-1.93646 Y13.42601
G01 X-1.89122 Y13.44740
G01 X-1.80697 Y13.49568
G01 X-1.73237 Y13.54343
G01 X-1.72995 Y13.54516
G01 X-1.72388 Y13.55024
G01 X-1.61990 Y13.62542
G01 X-1.61296 Y13.62974
G01 X-1.56163 Y13.66403
G01 X-1.53549 Y13.68275
G01 X-1.50732 Y13.69987
G01 X-1.43382 Y13.78943
G01 X-1.38045 Y13.86931
G01 X-1.31113 Y13.99898
G01 X-1.27438 Y14.08773
G01 X-1.23171 Y14.22842
G01 X-1.21296 Y14.32263
G01 X-1.19854 Y14.46896
G01 X-1.19620 Y14.51696
G01 X-1.19620 Y14.71557
G01 X-1.09902 Y14.83398
G01 X-1.04565 Y14.91384
G01 X-0.90702 Y15.17320
G01 X-0.87027 Y15.26195
G01 X-0.78490 Y15.54330
G01 X-0.76618 Y15.63754
G01 X-0.73735 Y15.93017
G01 X-0.73499 Y15.97818
G01 X-0.73499 Y25.81979
G01 X-0.73735 Y25.86782
G01 X-0.76618 Y26.16045
G01 X-0.78490 Y26.25468
G01 X-0.87027 Y26.53607
G01 X-0.90702 Y26.62481
G01 X-1.02498 Y26.84546
G01 X-1.04565 Y26.88415
G01 X-1.09902 Y26.96401
G01 X-1.28556 Y27.19131
G01 X-1.31784 Y27.22695
G01 X-1.53844 Y27.44755
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-4.69993 Y30.54114 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-4.69993 Y30.54114
G01 X-5.33007 Y29.91102
G01 X-4.82621 Y29.91102
G01 X-4.77818 Y29.90865
G01 X-4.52243 Y29.88346
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.06370 Y26.50896 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.06370 Y26.50896
G01 X-7.90434 Y26.37818
G01 X-7.82448 Y26.32481
G01 X-7.81727 Y26.32095
G01 X-7.78567 Y26.29505
G01 X-7.70581 Y26.24168
G01 X-7.57360 Y26.17102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-7.32598 Y26.17102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-7.32598 Y26.17102
G01 X-7.01869 Y26.17104
G01 X-6.96157 Y26.17102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.12618 Y17.75699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.12618 Y17.75699
G01 X-10.12618 Y17.87698
G01 X-11.00184 Y17.87698
G01 X-11.12275 Y17.85069
G01 X-11.22983 Y17.80482
G01 X-11.32633 Y17.73951
G01 X-11.40870 Y17.65714
G01 X-11.47400 Y17.56067
G01 X-11.49697 Y17.50700
G01 X-11.36082 Y17.50700
G01 X-11.34360 Y17.53921
G01 X-11.28267 Y17.61345
G01 X-11.20842 Y17.67439
G01 X-11.12371 Y17.71970
G01 X-11.03179 Y17.74756
G01 X-10.93618 Y17.75699
G01 X-10.12618 Y17.75699
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.12618 Y13.15700 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.12618 Y13.15700
G01 X-10.12618 Y13.27699
G01 X-10.92795 Y13.27699
G01 X-10.92795 Y13.00462
G01 X-10.89869 Y13.03251
G01 X-10.82036 Y13.08285
G01 X-10.73390 Y13.11745
G01 X-10.66687 Y13.13713
G01 X-10.52882 Y13.15700
G01 X-10.12618 Y13.15700
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.16050 Y12.48326 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.16050 Y12.48326
G01 X-8.15214 Y12.50767
G01 X-8.15212 Y12.50767
G01 X-8.05867 Y12.62154
G01 X-7.99075 Y12.68946
G01 X-7.85816 Y12.79830
G01 X-7.77830 Y12.85166
G01 X-7.62702 Y12.93251
G01 X-7.53827 Y12.96927
G01 X-7.37414 Y13.01908
G01 X-7.27993 Y13.03779
G01 X-7.10922 Y13.05461
G01 X-7.06119 Y13.05697
G01 X-6.49911 Y13.05697
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.25032 Y13.03480 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.25032 Y13.03480
G01 X-5.18298 Y13.04671
G01 X-5.18296 Y13.04668
G01 X-5.09246 Y13.03779
G01 X-4.99825 Y13.01908
G01 X-4.83409 Y12.96927
G01 X-4.74537 Y12.93251
G01 X-4.59408 Y12.85166
G01 X-4.51420 Y12.79830
G01 X-4.38161 Y12.68946
G01 X-4.32870 Y12.63655
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-4.84425 Y13.67752 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-4.84425 Y13.67752
G01 X-4.84394 Y13.67694
G01 X-4.84201 Y13.67252
G01 X-4.77737 Y13.60787
G01 X-4.66373 Y13.51460
G01 X-4.58385 Y13.46124
G01 X-4.45418 Y13.39192
G01 X-4.36543 Y13.35517
G01 X-4.22474 Y13.31250
G01 X-4.13053 Y13.29375
G01 X-4.01075 Y13.28194
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-1.53549 Y13.68275 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-1.53549 Y13.68275
G01 X-1.49988 Y13.70439
G01 X-1.48159 Y13.71067
G01 X-1.38995 Y13.72370
G01 X-1.29749 Y13.71925
G01 X-1.22833 Y13.70932
G01 X-1.13773 Y13.68735
G01 X-1.05294 Y13.64864
G01 X-0.97702 Y13.59456
G01 X-0.92422 Y13.54879
G01 X-0.85995 Y13.48138
G01 X-0.80961 Y13.40305
G01 X-0.77502 Y13.31659
G01 X-0.75533 Y13.24955
G01 X-0.73547 Y13.11148
G01 X-0.73547 Y1.34950
G01 X-0.74667 Y1.24539
G01 X-0.75787 Y1.19388
G01 X-0.78180 Y1.11585
G01 X-0.81832 Y1.04287
G01 X-0.86648 Y0.97699
G01 X-0.91225 Y0.92420
G01 X-0.97964 Y0.85999
G01 X-1.05795 Y0.80968
G01 X-1.14438 Y0.77508
G01 X-1.21141 Y0.75540
G01 X-1.34949 Y0.73553
G01 X-94.62568 Y0.73553
G01 X-94.72979 Y0.74673
G01 X-94.78130 Y0.75794
G01 X-94.85926 Y0.78181
G01 X-94.93216 Y0.81831
G01 X-94.99802 Y0.86637
G01 X-95.05082 Y0.91211
G01 X-95.11511 Y0.97955
G01 X-95.16550 Y1.05791
G01 X-95.20013 Y1.14442
G01 X-95.21981 Y1.21145
G01 X-95.23967 Y1.34950
G01 X-95.23967 Y55.46618
G01 X-95.23929 Y55.60004
G01 X-95.14854 Y86.17605
G01 X-95.13718 Y86.27941
G01 X-95.12598 Y86.33056
G01 X-95.10206 Y86.40829
G01 X-95.06561 Y86.48101
G01 X-95.01763 Y86.54666
G01 X-94.97188 Y86.59945
G01 X-94.90447 Y86.66371
G01 X-94.82611 Y86.71405
G01 X-94.73965 Y86.74867
G01 X-94.67262 Y86.76836
G01 X-94.53457 Y86.78822
G01 X-1.34949 Y86.78822
G01 X-1.24535 Y86.77702
G01 X-1.19384 Y86.76582
G01 X-1.11588 Y86.74194
G01 X-1.04299 Y86.70544
G01 X-0.97712 Y86.65738
G01 X-0.92432 Y86.61164
G01 X-0.86003 Y86.54420
G01 X-0.80964 Y86.46584
G01 X-0.77502 Y86.37933
G01 X-0.75533 Y86.31230
G01 X-0.73547 Y86.17422
G01 X-0.73547 Y28.01445
G01 X-0.73582 Y27.99616
G01 X-0.73615 Y27.98732
G01 X-0.74530 Y27.90965
G01 X-0.76668 Y27.83441
G01 X-0.79109 Y27.76896
G01 X-0.83178 Y27.68519
G01 X-0.88759 Y27.61061
G01 X-0.95650 Y27.54795
G01 X-1.01243 Y27.50607
G01 X-1.02498 Y27.49842
G01 X-1.09201 Y27.45755
G01 X-1.17933 Y27.42496
G01 X-1.27123 Y27.40952
G01 X-1.34093 Y27.40454
G01 X-1.43404 Y27.40678
G01 X-1.48213 Y27.41724
G01 X-1.53844 Y27.44755
G01 X-1.60087 Y27.48115
G01 X-1.65736 Y27.52344
G01 X-1.75553 Y27.60843
G01 X-3.44715 Y29.30007
G01 X-3.47920 Y29.33057
G01 X-3.52746 Y29.37431
G01 X-3.69744 Y29.51183
G01 X-3.70587 Y29.51790
G01 X-3.78019 Y29.56606
G01 X-3.88380 Y29.62620
G01 X-4.03927 Y29.70515
G01 X-4.07930 Y29.72425
G01 X-4.12103 Y29.73901
G01 X-4.30178 Y29.79804
G01 X-4.37694 Y29.82501
G01 X-4.39962 Y29.83365
G01 X-4.40132 Y29.83431
G01 X-4.48679 Y29.86669
G01 X-4.53322 Y29.88854
G01 X-4.54603 Y29.89892
G01 X-4.59949 Y29.95925
G01 X-4.64138 Y30.01518
G01 X-4.68989 Y30.09476
G01 X-4.72248 Y30.18208
G01 X-4.73792 Y30.27398
G01 X-4.74290 Y30.34368
G01 X-4.74067 Y30.43679
G01 X-4.73020 Y30.48490
G01 X-4.69993 Y30.54114
G01 X-4.69993 Y30.54116
G01 X-4.66632 Y30.60362
G01 X-4.62400 Y30.66014
G01 X-4.53902 Y30.75828
G01 X-4.02454 Y31.27276
G01 X-3.95149 Y31.34584
G01 X-3.94224 Y31.35506
G01 X-3.91174 Y31.38711
G01 X-3.89132 Y31.40964
G01 X-3.84994 Y31.46321
G01 X-3.80300 Y31.53001
G01 X-3.79980 Y31.53611
G01 X-3.75957 Y31.61320
G01 X-3.75444 Y31.62300
G01 X-3.73488 Y31.66283
G01 X-3.72058 Y31.70474
G01 X-3.69121 Y31.79826
G01 X-3.68916 Y31.80489
G01 X-3.67874 Y31.85996
G01 X-3.67867 Y31.86034
G01 X-3.67625 Y31.87667
G01 X-3.67509 Y31.88515
G01 X-3.67087 Y31.91246
G01 X-3.66752 Y31.93227
G01 X-3.65766 Y31.98193
G01 X-3.64743 Y32.02699
G01 X-3.62721 Y32.10207
G01 X-3.62604 Y32.10580
G01 X-3.57130 Y32.14837
G01 X-3.47023 Y32.23280
G01 X-3.44494 Y32.25475
G01 X-3.42632 Y32.27606
G01 X-3.38553 Y32.32810
G01 X-3.34270 Y32.41213
G01 X-3.33412 Y32.44004
G01 X-3.31702 Y32.50921
G01 X-3.31507 Y32.52874
G01 X-3.31392 Y32.57398
G01 X-3.31392 Y34.27397
G01 X-3.31507 Y34.31924
G01 X-3.31702 Y34.33877
G01 X-3.34268 Y34.43577
G01 X-3.38553 Y34.51990
G01 X-3.44494 Y34.59323
G01 X-3.51827 Y34.65264
G01 X-3.60239 Y34.69549
G01 X-3.69939 Y34.72114
G01 X-3.71890 Y34.72310
G01 X-3.76419 Y34.72424
G01 X-3.82307 Y34.72424
G01 X-3.83859 Y34.72437
G01 X-3.84742 Y34.72452
G01 X-3.99449 Y34.73907
G01 X-4.06439 Y34.75167
G01 X-4.15446 Y34.78235
G01 X-4.22703 Y34.83671
G01 X-4.28966 Y34.90562
G01 X-4.33152 Y34.96155
G01 X-4.38001 Y35.04110
G01 X-4.41255 Y35.12838
G01 X-4.42799 Y35.22025
G01 X-4.43297 Y35.28992
G01 X-4.43074 Y35.38299
G01 X-4.42025 Y35.43125
G01 X-4.35644 Y35.54982
G01 X-4.31415 Y35.60633
G01 X-4.22911 Y35.70455
G01 X-3.42589 Y36.50778
G01 X-3.33470 Y36.59899
G01 X-3.30420 Y36.63099
G01 X-3.27018 Y36.66853
G01 X-3.17974 Y36.78248
G01 X-3.15304 Y36.81786
G01 X-3.13056 Y36.85609
G01 X-3.05990 Y36.98324
G01 X-3.03826 Y37.02901
G01 X-3.00437 Y37.11077
G01 X-2.98733 Y37.15842
G01 X-2.94738 Y37.29835
G01 X-2.93628 Y37.34115
G01 X-2.93013 Y37.38509
G01 X-2.93005 Y37.38573
G01 X-2.91349 Y37.52959
G01 X-2.91100 Y37.58019
G01 X-2.90991 Y37.62446
G01 X-2.90991 Y47.52096
G01 X-2.91100 Y47.56523
G01 X-2.91349 Y47.61583
G01 X-2.93013 Y47.76036
G01 X-2.93628 Y47.80425
G01 X-2.94738 Y47.84710
G01 X-2.98733 Y47.98700
G01 X-3.00437 Y48.03468
G01 X-3.03826 Y48.11644
G01 X-3.05990 Y48.16219
G01 X-3.13056 Y48.28936
G01 X-3.15304 Y48.32756
G01 X-3.17976 Y48.36297
G01 X-3.27016 Y48.47687
G01 X-3.30422 Y48.51443
G01 X-3.33470 Y48.54646
G01 X-3.71570 Y48.92746
G01 X-3.74773 Y48.95797
G01 X-3.78527 Y48.99200
G01 X-3.89919 Y49.08243
G01 X-3.93460 Y49.10912
G01 X-3.97280 Y49.13160
G01 X-4.09995 Y49.20226
G01 X-4.14572 Y49.22390
G01 X-4.22749 Y49.25779
G01 X-4.27516 Y49.27483
G01 X-4.41506 Y49.31479
G01 X-4.45791 Y49.32589
G01 X-4.50181 Y49.33203
G01 X-4.64633 Y49.34867
G01 X-4.69693 Y49.35116
G01 X-4.74120 Y49.35223
G01 X-8.17020 Y49.35223
G01 X-8.21445 Y49.35116
G01 X-8.26502 Y49.34867
G01 X-8.40954 Y49.33203
G01 X-8.45341 Y49.32589
G01 X-8.49629 Y49.31479
G01 X-8.58412 Y49.28969
G01 X-8.63621 Y49.27483
G01 X-8.68386 Y49.25779
G01 X-8.76563 Y49.22390
G01 X-8.81137 Y49.20226
G01 X-8.93855 Y49.13160
G01 X-8.97675 Y49.10912
G01 X-9.01216 Y49.08240
G01 X-9.12608 Y48.99198
G01 X-9.16362 Y48.95794
G01 X-9.19565 Y48.92746
G01 X-9.28683 Y48.83628
G01 X-10.40941 Y47.71370
G01 X-10.43989 Y47.68167
G01 X-10.47393 Y47.64413
G01 X-10.49577 Y47.61662
G01 X-10.56435 Y47.53021
G01 X-10.59112 Y47.49472
G01 X-10.61355 Y47.45660
G01 X-10.68429 Y47.32929
G01 X-10.70586 Y47.28368
G01 X-10.73974 Y47.20191
G01 X-10.75678 Y47.15424
G01 X-10.79674 Y47.01433
G01 X-10.80784 Y46.97153
G01 X-10.81091 Y46.95149
G01 X-10.81398 Y46.92759
G01 X-10.83065 Y46.78289
G01 X-10.83311 Y46.73247
G01 X-10.83420 Y46.68820
G01 X-10.83420 Y40.90947
G01 X-10.83941 Y40.81269
G01 X-10.84507 Y40.75999
G01 X-10.87395 Y40.63975
G01 X-10.88551 Y40.59166
G01 X-10.92529 Y40.53713
G01 X-10.97103 Y40.48432
G01 X-11.03847 Y40.42001
G01 X-11.08254 Y40.39169
G01 X-11.13954 Y40.37498
G01 X-11.20913 Y40.35458
G01 X-11.27901 Y40.34455
G01 X-11.40847 Y40.33523
G01 X-11.74235 Y40.33523
G01 X-11.83933 Y40.34046
G01 X-11.89206 Y40.34615
G01 X-12.06016 Y40.38653
G01 X-12.11469 Y40.42634
G01 X-12.16750 Y40.47208
G01 X-12.23179 Y40.53952
G01 X-12.26013 Y40.58359
G01 X-12.29722 Y40.71013
G01 X-12.30728 Y40.78001
G01 X-12.31660 Y40.90947
G01 X-12.31660 Y45.59094
G01 X-12.31609 Y45.62058
G01 X-12.31556 Y45.63679
G01 X-12.31411 Y45.66615
G01 X-12.31327 Y45.67921
G01 X-12.31149 Y45.69458
G01 X-12.30900 Y45.74520
G01 X-12.30794 Y45.78942
G01 X-12.30794 Y47.01296
G01 X-12.30900 Y47.05723
G01 X-12.31149 Y47.10783
G01 X-12.32813 Y47.25236
G01 X-12.33428 Y47.29625
G01 X-12.34538 Y47.33910
G01 X-12.38533 Y47.47900
G01 X-12.40237 Y47.52668
G01 X-12.43626 Y47.60844
G01 X-12.45790 Y47.65418
G01 X-12.52856 Y47.78136
G01 X-12.55107 Y47.81962
G01 X-12.57027 Y47.84542
G01 X-12.57774 Y47.85497
G01 X-12.66816 Y47.96887
G01 X-12.70222 Y48.00643
G01 X-12.73270 Y48.03846
G01 X-13.62170 Y48.92746
G01 X-13.65373 Y48.95797
G01 X-13.69127 Y48.99200
G01 X-13.80519 Y49.08243
G01 X-13.84060 Y49.10912
G01 X-13.87880 Y49.13160
G01 X-14.00595 Y49.20226
G01 X-14.05172 Y49.22390
G01 X-14.13349 Y49.25779
G01 X-14.18116 Y49.27483
G01 X-14.32106 Y49.31479
G01 X-14.36391 Y49.32589
G01 X-14.40781 Y49.33203
G01 X-14.55233 Y49.34867
G01 X-14.60293 Y49.35116
G01 X-14.64717 Y49.35223
G01 X-16.04420 Y49.35223
G01 X-16.08845 Y49.35116
G01 X-16.13899 Y49.34867
G01 X-16.28354 Y49.33203
G01 X-16.32738 Y49.32589
G01 X-16.37029 Y49.31479
G01 X-16.45812 Y49.28969
G01 X-16.51021 Y49.27483
G01 X-16.55786 Y49.25779
G01 X-16.63963 Y49.22390
G01 X-16.68537 Y49.20226
G01 X-16.70722 Y49.19015
G01 X-16.79817 Y49.13955
G01 X-16.81260 Y49.13173
G01 X-16.87173 Y49.10023
G01 X-16.88131 Y49.09508
G01 X-16.89513 Y49.09200
G01 X-16.91512 Y49.08730
G01 X-16.98179 Y49.07087
G01 X-16.98347 Y49.07046
G01 X-16.98999 Y49.06841
G01 X-17.02736 Y49.05754
G01 X-17.04786 Y49.05205
G01 X-17.12454 Y49.03503
G01 X-17.21750 Y49.01855
G01 X-17.21913 Y49.01827
G01 X-17.24796 Y49.01319
G01 X-17.35172 Y48.95774
G01 X-17.43160 Y48.90437
G01 X-17.54524 Y48.81110
G01 X-17.58087 Y48.77880
G01 X-17.70282 Y48.65682
G01 X-17.77148 Y48.49117
G01 X-17.78905 Y48.45149
G01 X-17.80686 Y48.41385
G01 X-17.83452 Y48.36056
G01 X-17.85164 Y48.34750
G01 X-17.89083 Y48.31845
G01 X-17.95169 Y48.27763
G01 X-17.99093 Y48.25411
G01 X-18.04061 Y48.22749
G01 X-18.07983 Y48.20895
G01 X-18.12162 Y48.19157
G01 X-18.16083 Y48.17755
G01 X-18.19700 Y48.16653
G01 X-18.23622 Y48.15672
G01 X-18.26891 Y48.15020
G01 X-18.30813 Y48.14438
G01 X-18.33871 Y48.14136
G01 X-18.37793 Y48.13943
G01 X-18.39286 Y48.13907
G01 X-18.79286 Y48.13907
G01 X-18.80775 Y48.13943
G01 X-18.84696 Y48.14136
G01 X-18.87754 Y48.14438
G01 X-18.91676 Y48.15020
G01 X-18.94945 Y48.15672
G01 X-18.95138 Y48.15721
G01 X-18.98163 Y48.17963
G01 X-19.00642 Y48.19998
G01 X-19.02773 Y48.21926
G01 X-19.02900 Y48.22088
G01 X-19.03449 Y48.22756
G01 X-19.05288 Y48.25230
G01 X-19.07478 Y48.28507
G01 X-19.08986 Y48.31027
G01 X-19.10835 Y48.34486
G01 X-19.10851 Y48.34512
G01 X-19.12220 Y48.37080
G01 X-19.12238 Y48.37115
G01 X-19.14102 Y48.40605
G01 X-19.15504 Y48.43574
G01 X-19.17071 Y48.47356
G01 X-19.17749 Y48.49119
G01 X-19.18440 Y48.51044
G01 X-19.19283 Y48.53206
G01 X-19.19283 Y50.23389
G01 X-19.21315 Y50.31517
G01 X-19.22009 Y50.34971
G01 X-19.23462 Y50.44773
G01 X-19.23764 Y50.47839
G01 X-19.24247 Y50.57640
G01 X-19.24318 Y50.60594
G01 X-19.24803 Y50.70396
G01 X-19.25105 Y50.73465
G01 X-19.26558 Y50.83266
G01 X-19.27249 Y50.86723
G01 X-19.27785 Y50.88865
G01 X-19.27785 Y52.69118
G01 X-19.27831 Y52.70932
G01 X-19.28021 Y52.74851
G01 X-19.28387 Y52.78559
G01 X-19.28463 Y52.79075
G01 X-19.28847 Y52.79639
G01 X-19.30447 Y52.82034
G01 X-19.32583 Y52.84917
G01 X-19.35115 Y52.88006
G01 X-19.37277 Y52.90388
G01 X-19.40061 Y52.93175
G01 X-19.42324 Y52.95224
G01 X-19.45354 Y52.97711
G01 X-19.45570 Y52.97886
G01 X-19.47739 Y52.99636
G01 X-19.47970 Y52.99822
G01 X-19.50833 Y53.02171
G01 X-19.53589 Y53.04213
G01 X-19.56995 Y53.06489
G01 X-19.60434 Y53.08547
G01 X-19.64181 Y53.10548
G01 X-19.66281 Y53.11607
G01 X-19.70058 Y53.13390
G01 X-19.75075 Y53.16080
G01 X-19.99580 Y53.30769
G01 X-20.06286 Y53.35156
G01 X-20.07589 Y53.36080
G01 X-20.10744 Y53.34465
G01 X-20.14485 Y53.32466
G01 X-20.20668 Y53.28846
G01 X-20.22080 Y53.27942
G01 X-20.25539 Y53.25844
G01 X-20.27665 Y53.24622
G01 X-20.32230 Y53.21793
G01 X-20.35504 Y53.19603
G01 X-20.35936 Y53.19314
G01 X-20.39476 Y53.12654
G01 X-20.41330 Y53.08735
G01 X-20.43901 Y53.02545
G01 X-20.45306 Y52.98623
G01 X-20.46990 Y52.93088
G01 X-20.47970 Y52.89169
G01 X-20.48978 Y52.84112
G01 X-20.49560 Y52.80190
G01 X-20.49784 Y52.78473
G01 X-20.49784 Y52.71442
G01 X-20.49786 Y52.69118
G01 X-20.49786 Y51.00825
G01 X-20.50739 Y50.97526
G01 X-20.53195 Y50.87724
G01 X-20.53964 Y50.83861
G01 X-20.55420 Y50.74059
G01 X-20.55760 Y50.70594
G01 X-20.56243 Y50.60790
G01 X-20.56286 Y50.59116
G01 X-20.56286 Y48.49117
G01 X-20.56327 Y48.47450
G01 X-20.56443 Y48.45070
G01 X-20.57058 Y48.43584
G01 X-20.58465 Y48.40605
G01 X-20.60330 Y48.37115
G01 X-20.60347 Y48.37080
G01 X-20.61717 Y48.34512
G01 X-20.63583 Y48.31019
G01 X-20.65087 Y48.28512
G01 X-20.67274 Y48.25235
G01 X-20.69116 Y48.22756
G01 X-20.69664 Y48.22088
G01 X-20.71554 Y48.19548
G01 X-20.71630 Y48.19432
G01 X-20.73703 Y48.16655
G01 X-20.76395 Y48.13374
G01 X-20.79392 Y48.10074
G01 X-20.82194 Y48.07273
G01 X-20.82534 Y48.06930
G01 X-20.86301 Y48.03094
G01 X-20.86743 Y48.02650
G01 X-20.90332 Y47.99061
G01 X-20.93286 Y47.96252
G01 X-21.00495 Y47.89716
G01 X-21.04546 Y47.85855
G01 X-21.10284 Y47.80117
G01 X-21.10284 Y47.76716
G01 X-21.10048 Y47.71916
G01 X-21.08607 Y47.57283
G01 X-21.06733 Y47.47862
G01 X-21.02466 Y47.33790
G01 X-20.98790 Y47.24916
G01 X-20.93748 Y47.15487
G01 X-20.91859 Y47.11949
G01 X-20.86522 Y47.03963
G01 X-20.77193 Y46.92597
G01 X-20.73964 Y46.89033
G01 X-20.48041 Y46.63117
G01 X-20.09710 Y46.47240
G01 X-20.06522 Y46.46011
G01 X-19.91823 Y46.40750
G01 X-19.86756 Y46.39208
G01 X-19.72052 Y46.35525
G01 X-19.67935 Y46.34702
G01 X-19.53233 Y46.32523
G01 X-19.49657 Y46.32170
G01 X-19.34955 Y46.31449
G01 X-19.33259 Y46.31408
G01 X-17.36914 Y46.31408
G01 X-17.35212 Y46.31449
G01 X-17.25283 Y46.31936
G01 X-17.23526 Y46.31980
G01 X-17.20490 Y46.31980
G01 X-17.18598 Y46.32028
G01 X-17.16812 Y46.32119
G01 X-17.14788 Y46.32170
G01 X-17.09662 Y46.32170
G01 X-17.08839 Y46.32162
G01 X-17.02705 Y46.36262
G01 X-16.99703 Y46.38490
G01 X-16.96597 Y46.41037
G01 X-16.93889 Y46.43046
G01 X-16.87684 Y46.47194
G01 X-16.85169 Y46.49059
G01 X-16.81204 Y46.52312
G01 X-16.78690 Y46.54177
G01 X-16.73305 Y46.57776
G01 X-16.71948 Y46.58731
G01 X-16.65784 Y46.63303
G01 X-16.62728 Y46.65340
G01 X-16.48862 Y46.73653
G01 X-16.46874 Y46.74779
G01 X-16.44519 Y46.74608
G01 X-16.29680 Y46.73145
G01 X-16.28608 Y46.73054
G01 X-16.25825 Y46.72856
G01 X-16.24788 Y46.72767
G01 X-16.09177 Y46.71230
G01 X-16.06328 Y46.70842
G01 X-16.05400 Y46.70682
G01 X-16.04415 Y46.70522
G01 X-15.89726 Y46.68342
G01 X-15.85352 Y46.67471
G01 X-15.69673 Y46.63542
G01 X-15.64291 Y46.61906
G01 X-15.48609 Y46.56295
G01 X-15.41685 Y46.53417
G01 X-15.26003 Y46.46000
G01 X-15.24702 Y46.45376
G01 X-15.21164 Y46.41096
G01 X-15.20641 Y46.39094
G01 X-15.16711 Y46.23412
G01 X-15.15142 Y46.15546
G01 X-15.12817 Y45.99864
G01 X-15.12106 Y45.92681
G01 X-15.11908 Y45.88645
G01 X-15.11908 Y45.81545
G01 X-15.11758 Y45.76956
G01 X-15.11685 Y45.75797
G01 X-15.11685 Y45.73516
G01 X-15.11768 Y45.70080
G01 X-15.12538 Y45.54395
G01 X-15.13239 Y45.47299
G01 X-15.15566 Y45.31617
G01 X-15.17115 Y45.23842
G01 X-15.21045 Y45.08157
G01 X-15.23770 Y44.99204
G01 X-15.25685 Y44.93849
G01 X-15.25683 Y39.68163
G01 X-15.23770 Y39.62814
G01 X-15.21045 Y39.53861
G01 X-15.17115 Y39.38176
G01 X-15.15566 Y39.30399
G01 X-15.13239 Y39.14714
G01 X-15.12538 Y39.07620
G01 X-15.11768 Y38.91935
G01 X-15.11685 Y38.88499
G01 X-15.11685 Y38.69294
G01 X-15.11789 Y38.65342
G01 X-15.11972 Y38.61895
G01 X-15.12081 Y38.57671
G01 X-15.12081 Y38.55606
G01 X-15.09470 Y38.37978
G01 X-15.08187 Y38.31201
G01 X-15.07202 Y38.29848
G01 X-14.97539 Y38.16820
G01 X-14.94093 Y38.08496
G01 X-14.80958 Y37.87681
G01 X-14.56686 Y37.82101
G01 X-14.44740 Y37.82101
G01 X-14.44677 Y37.82085
G01 X-14.25073 Y37.77176
G01 X-14.20946 Y37.76350
G01 X-14.01342 Y37.73444
G01 X-13.97898 Y37.73104
G01 X-13.78297 Y37.72141
G01 X-13.76684 Y37.72101
G01 X-9.44020 Y37.72101
G01 X-9.42407 Y37.72141
G01 X-9.22803 Y37.73104
G01 X-9.19359 Y37.73444
G01 X-8.99755 Y37.76350
G01 X-8.95628 Y37.77176
G01 X-8.76024 Y37.82085
G01 X-8.75961 Y37.82101
G01 X-8.64015 Y37.82101
G01 X-8.50398 Y37.83856
G01 X-8.31678 Y38.08499
G01 X-8.28859 Y38.15301
G01 X-8.28021 Y38.16226
G01 X-8.23581 Y38.21641
G01 X-8.11775 Y38.37557
G01 X-8.08775 Y38.41895
G01 X-8.08356 Y38.44435
G01 X-8.06659 Y38.55885
G01 X-8.06659 Y38.62525
G01 X-8.06634 Y38.64399
G01 X-8.06504 Y38.69540
G01 X-8.06482 Y38.71280
G01 X-8.06482 Y38.85301
G01 X-8.06235 Y38.90952
G01 X-8.06174 Y38.91664
G01 X-8.06007 Y38.94120
G01 X-8.05356 Y39.07343
G01 X-8.04711 Y39.13881
G01 X-8.02385 Y39.29565
G01 X-8.00949 Y39.36769
G01 X-7.97020 Y39.52451
G01 X-7.94480 Y39.60802
G01 X-7.91038 Y39.70424
G01 X-7.91038 Y40.64061
G01 X-7.91432 Y40.66576
G01 X-7.92438 Y40.73563
G01 X-7.93370 Y40.86510
G01 X-7.93370 Y43.82585
G01 X-7.93241 Y43.87390
G01 X-7.93098 Y43.90040
G01 X-7.91038 Y44.05114
G01 X-7.91038 Y44.46161
G01 X-7.88684 Y44.48513
G01 X-7.71808 Y44.71015
G01 X-7.66184 Y44.93519
G01 X-7.66184 Y45.43151
G01 X-7.67460 Y45.51749
G01 X-7.67866 Y45.55866
G01 X-7.68636 Y45.71550
G01 X-7.68636 Y45.75485
G01 X-7.67866 Y45.91169
G01 X-7.67460 Y45.95287
G01 X-7.65133 Y46.10969
G01 X-7.64193 Y46.15680
G01 X-7.60264 Y46.31362
G01 X-7.58521 Y46.37095
G01 X-7.52910 Y46.52777
G01 X-7.52641 Y46.53519
G01 X-7.52471 Y46.53981
G01 X-7.46761 Y46.56295
G01 X-7.31079 Y46.61906
G01 X-7.25694 Y46.63542
G01 X-7.10010 Y46.67471
G01 X-7.05641 Y46.68342
G01 X-6.89959 Y46.70669
G01 X-6.86167 Y46.71042
G01 X-6.70485 Y46.71814
G01 X-6.66881 Y46.71814
G01 X-6.51199 Y46.71042
G01 X-6.47409 Y46.70669
G01 X-6.31724 Y46.68342
G01 X-6.27353 Y46.67471
G01 X-6.11671 Y46.63542
G01 X-6.06289 Y46.61906
G01 X-5.90607 Y46.56295
G01 X-5.83683 Y46.53417
G01 X-5.76294 Y46.49922
G01 X-5.73325 Y46.41629
G01 X-5.71166 Y46.34530
G01 X-5.67239 Y46.18848
G01 X-5.66043 Y46.12846
G01 X-5.63716 Y45.97166
G01 X-5.63185 Y45.91792
G01 X-5.62415 Y45.76107
G01 X-5.62415 Y45.70928
G01 X-5.63185 Y45.55244
G01 X-5.63716 Y45.49872
G01 X-5.64849 Y45.42226
G01 X-5.64849 Y39.13830
G01 X-5.64920 Y39.11001
G01 X-5.65641 Y38.96299
G01 X-5.66220 Y38.90429
G01 X-5.68402 Y38.75728
G01 X-5.69693 Y38.69261
G01 X-5.73373 Y38.54559
G01 X-5.75669 Y38.47013
G01 X-5.77518 Y38.41847
G01 X-5.77518 Y38.21057
G01 X-5.88575 Y37.94356
G01 X-5.89847 Y37.91486
G01 X-5.96523 Y37.77371
G01 X-5.98776 Y37.73147
G01 X-6.06571 Y37.60147
G01 X-6.08633 Y37.57059
G01 X-6.17485 Y37.45121
G01 X-6.19474 Y37.42695
G01 X-6.29362 Y37.31786
G01 X-6.30378 Y37.30719
G01 X-7.44036 Y36.17064
G01 X-7.45102 Y36.16046
G01 X-7.56007 Y36.06162
G01 X-7.58432 Y36.04174
G01 X-7.70370 Y35.95319
G01 X-7.73462 Y35.93257
G01 X-7.86461 Y35.85464
G01 X-7.90685 Y35.83209
G01 X-7.93594 Y35.81834
G01 X-8.05267 Y35.81260
G01 X-8.07675 Y35.81202
G01 X-15.25271 Y35.81202
G01 X-15.27676 Y35.81260
G01 X-15.42375 Y35.81982
G01 X-15.47387 Y35.82477
G01 X-15.62088 Y35.84659
G01 X-15.67671 Y35.85771
G01 X-15.82373 Y35.89454
G01 X-15.88990 Y35.91466
G01 X-16.03694 Y35.96726
G01 X-16.07699 Y35.98273
G01 X-16.25621 Y36.05698
G01 X-16.70005 Y36.50077
G01 X-16.71324 Y36.48761
G01 X-16.76523 Y36.43561
G01 X-16.80310 Y36.40452
G01 X-16.88298 Y36.35116
G01 X-16.92616 Y36.32805
G01 X-17.01494 Y36.29129
G01 X-17.06185 Y36.27707
G01 X-17.15606 Y36.25832
G01 X-17.20483 Y36.25352
G01 X-17.25283 Y36.25116
G01 X-27.55286 Y36.25116
G01 X-27.60087 Y36.25352
G01 X-27.64966 Y36.25832
G01 X-27.74387 Y36.27707
G01 X-27.79076 Y36.29129
G01 X-27.87951 Y36.32805
G01 X-27.92274 Y36.35116
G01 X-28.00260 Y36.40452
G01 X-28.04049 Y36.43561
G01 X-28.10841 Y36.50353
G01 X-28.13950 Y36.54143
G01 X-28.19287 Y36.62129
G01 X-28.21596 Y36.66452
G01 X-28.25271 Y36.75324
G01 X-28.26696 Y36.80016
G01 X-28.28568 Y36.89436
G01 X-28.29048 Y36.94313
G01 X-28.29284 Y36.99116
G01 X-28.29284 Y37.55550
G01 X-28.41283 Y37.55550
G01 X-28.41283 Y36.95360
G01 X-28.40300 Y36.84125
G01 X-28.36409 Y36.69594
G01 X-28.30046 Y36.55952
G01 X-28.29538 Y36.55225
G01 X-28.24913 Y36.47046
G01 X-28.22985 Y36.42713
G01 X-28.20145 Y36.33501
G01 X-28.19541 Y36.31542
G01 X-28.18840 Y36.19873
G01 X-28.19256 Y36.12899
G01 X-28.20694 Y36.03696
G01 X-28.23846 Y35.94933
G01 X-28.27219 Y35.89236
G01 X-28.29190 Y35.87354
G01 X-28.34598 Y35.82652
G01 X-28.37333 Y35.80366
G01 X-28.44318 Y35.74743
G01 X-28.44799 Y35.74359
G01 X-28.55708 Y35.65700
G01 X-28.59462 Y35.62294
G01 X-28.62665 Y35.59246
G01 X-29.32667 Y34.89246
G01 X-29.39868 Y34.82779
G01 X-29.43996 Y34.79450
G01 X-29.54549 Y34.72983
G01 X-29.58773 Y34.70397
G01 X-29.65449 Y34.69356
G01 X-29.72418 Y34.68858
G01 X-29.81735 Y34.69081
G01 X-29.86840 Y34.70194
G01 X-29.92060 Y34.73046
G01 X-29.98425 Y34.76526
G01 X-30.04077 Y34.80758
G01 X-30.13879 Y34.89246
G01 X-31.72072 Y36.47440
G01 X-31.75397 Y36.50948
G01 X-31.77173 Y36.52924
G01 X-31.86502 Y36.65251
G01 X-31.86957 Y36.68111
G01 X-31.87960 Y36.75096
G01 X-31.88892 Y36.88044
G01 X-31.88892 Y37.44897
G01 X-31.89007 Y37.49424
G01 X-31.89202 Y37.51377
G01 X-31.91768 Y37.61077
G01 X-31.96053 Y37.69490
G01 X-32.01994 Y37.76823
G01 X-32.09327 Y37.82764
G01 X-32.17739 Y37.87049
G01 X-32.27439 Y37.89614
G01 X-32.29390 Y37.89810
G01 X-32.33919 Y37.89924
G01 X-34.03919 Y37.89924
G01 X-34.08440 Y37.89810
G01 X-34.10396 Y37.89614
G01 X-34.18008 Y37.87699
G01 X-34.20106 Y37.87046
G01 X-34.28511 Y37.82761
G01 X-34.35841 Y37.76823
G01 X-34.40746 Y37.70887
G01 X-34.41780 Y37.69492
G01 X-34.43588 Y37.66203
G01 X-34.46067 Y37.61080
G01 X-34.48633 Y37.51377
G01 X-34.48828 Y37.49424
G01 X-34.48943 Y37.44897
G01 X-34.48943 Y35.74898
G01 X-34.48828 Y35.70374
G01 X-34.48633 Y35.68421
G01 X-34.46067 Y35.58720
G01 X-34.41782 Y35.50308
G01 X-34.35841 Y35.42975
G01 X-34.28508 Y35.37034
G01 X-34.20096 Y35.32749
G01 X-34.10396 Y35.30183
G01 X-34.08442 Y35.29988
G01 X-34.03919 Y35.29874
G01 X-33.47066 Y35.29874
G01 X-33.42263 Y35.29747
G01 X-33.39611 Y35.29604
G01 X-33.24269 Y35.27483
G01 X-33.21912 Y35.25774
G01 X-33.16261 Y35.21542
G01 X-33.06459 Y35.13054
G01 X-31.48265 Y33.54860
G01 X-31.41798 Y33.47659
G01 X-31.38468 Y33.43532
G01 X-31.32001 Y33.32973
G01 X-31.13282 Y33.14253
G01 X-31.32062 Y32.95472
G01 X-31.35545 Y32.89102
G01 X-31.39776 Y32.83450
G01 X-31.48265 Y32.73649
G01 X-34.56110 Y29.65801
G01 X-34.63327 Y29.59324
G01 X-34.67454 Y29.55996
G01 X-34.82217 Y29.46954
G01 X-34.88892 Y29.45912
G01 X-34.95861 Y29.45415
G01 X-35.05171 Y29.45638
G01 X-35.10289 Y29.46751
G01 X-35.15496 Y29.49595
G01 X-35.15498 Y29.49598
G01 X-35.21851 Y29.53068
G01 X-35.27502 Y29.57299
G01 X-35.37324 Y29.65803
G01 X-37.96605 Y32.25084
G01 X-37.99912 Y32.28574
G01 X-38.01685 Y32.30547
G01 X-38.11032 Y32.42894
G01 X-38.11489 Y32.45757
G01 X-38.12493 Y32.52744
G01 X-38.13425 Y32.65691
G01 X-38.13425 Y35.67715
G01 X-38.13293 Y35.72558
G01 X-38.13151 Y35.75210
G01 X-38.11032 Y35.90511
G01 X-38.09333 Y35.92853
G01 X-38.05104 Y35.98504
G01 X-37.96605 Y36.08319
G01 X-37.25765 Y36.79160
G01 X-37.22277 Y36.82467
G01 X-37.20304 Y36.84240
G01 X-37.09468 Y36.92606
G01 X-37.06222 Y36.93686
G01 X-37.05066 Y36.94046
G01 X-36.98086 Y36.95050
G01 X-36.89018 Y36.95893
G01 X-36.85160 Y36.96061
G01 X-36.84492 Y36.96091
G01 X-36.82541 Y36.96287
G01 X-36.72839 Y36.98852
G01 X-36.68493 Y37.00927
G01 X-36.64431 Y37.03135
G01 X-36.64043 Y37.03419
G01 X-36.57091 Y37.09078
G01 X-36.51155 Y37.16411
G01 X-36.49768 Y37.18900
G01 X-36.46867 Y37.24824
G01 X-36.44319 Y37.34435
G01 X-36.43108 Y37.40295
G01 X-36.42966 Y37.41001
G01 X-36.42808 Y37.41796
G01 X-36.41906 Y37.43297
G01 X-36.39829 Y37.46604
G01 X-36.38665 Y37.48375
G01 X-36.35155 Y37.54166
G01 X-36.28091 Y37.66878
G01 X-36.25925 Y37.71458
G01 X-36.22536 Y37.79637
G01 X-36.20832 Y37.84402
G01 X-36.16837 Y37.98392
G01 X-36.16486 Y37.99657
G01 X-36.15727 Y38.02672
G01 X-36.15112 Y38.07066
G01 X-36.13448 Y38.21521
G01 X-36.13199 Y38.26576
G01 X-36.13199 Y38.35428
G01 X-36.13448 Y38.40485
G01 X-36.15112 Y38.54940
G01 X-36.15727 Y38.59324
G01 X-36.16710 Y38.63157
G01 X-36.16837 Y38.63614
G01 X-36.17400 Y38.65733
G01 X-36.17764 Y38.67163
G01 X-36.20347 Y38.83035
G01 X-36.20982 Y38.88664
G01 X-36.22516 Y38.92370
G01 X-36.31757 Y39.09657
G01 X-36.37093 Y39.17645
G01 X-36.40042 Y39.21237
G01 X-36.40895 Y39.29901
G01 X-36.43141 Y39.31498
G01 X-36.60804 Y39.44061
G01 X-36.89018 Y39.50749
G01 X-37.08165 Y39.50749
G01 X-37.11378 Y39.51318
G01 X-37.30982 Y39.54224
G01 X-37.36079 Y39.54729
G01 X-37.55686 Y39.55692
G01 X-37.58119 Y39.55753
G01 X-37.79018 Y39.55753
G01 X-37.81451 Y39.55692
G01 X-38.01053 Y39.54729
G01 X-38.06150 Y39.54224
G01 X-38.25754 Y39.51318
G01 X-38.28967 Y39.50749
G01 X-38.69018 Y39.50749
G01 X-38.98764 Y39.43312
G01 X-39.14520 Y39.31498
G01 X-40.09361 Y39.31498
G01 X-40.11050 Y39.32296
G01 X-40.20115 Y39.36060
G01 X-40.39719 Y39.43076
G01 X-40.46841 Y39.45242
G01 X-40.66445 Y39.50155
G01 X-40.72279 Y39.51318
G01 X-40.91883 Y39.54224
G01 X-40.96980 Y39.54729
G01 X-41.03513 Y39.55049
G01 X-41.06005 Y39.55232
G01 X-41.12833 Y39.55905
G01 X-41.16516 Y39.56406
G01 X-41.17786 Y39.56627
G01 X-41.19020 Y39.56822
G01 X-41.24644 Y39.57658
G01 X-41.29972 Y39.58720
G01 X-41.36830 Y39.60437
G01 X-41.42782 Y39.62248
G01 X-41.49642 Y39.64704
G01 X-41.53010 Y39.66002
G01 X-41.86808 Y39.80002
G01 X-42.09523 Y40.02712
G01 X-42.15985 Y40.13258
G01 X-42.19309 Y40.17383
G01 X-42.25791 Y40.24605
G01 X-42.50346 Y40.49159
G01 X-42.60160 Y40.57658
G01 X-42.65812 Y40.61887
G01 X-42.69965 Y40.64828
G01 X-42.83437 Y40.65869
G01 X-42.84572 Y40.65875
G01 X-42.86101 Y40.65895
G01 X-42.90953 Y40.65999
G01 X-42.93444 Y40.66085
G01 X-42.99109 Y40.66365
G01 X-43.10998 Y40.67846
G01 X-43.19093 Y40.69230
G01 X-43.19718 Y40.69418
G01 X-43.36589 Y40.74582
G01 X-43.38410 Y40.75158
G01 X-43.44724 Y40.78064
G01 X-43.56535 Y40.84061
G01 X-43.60305 Y40.86344
G01 X-43.67640 Y40.91295
G01 X-43.73190 Y40.95453
G01 X-43.81267 Y41.02501
G01 X-43.86388 Y41.07338
G01 X-43.87648 Y41.08651
G01 X-43.88064 Y41.09093
G01 X-43.98781 Y41.22336
G01 X-44.00734 Y41.24838
G01 X-44.03652 Y41.29723
G01 X-44.10701 Y41.42402
G01 X-44.12017 Y41.45257
G01 X-44.15329 Y41.53472
G01 X-44.18019 Y41.61211
G01 X-44.20444 Y41.70355
G01 X-44.22293 Y41.79011
G01 X-44.22596 Y41.80871
G01 X-44.23302 Y41.89019
G01 X-44.23957 Y41.96573
G01 X-44.24231 Y42.01000
G01 X-44.23957 Y42.05427
G01 X-44.22596 Y42.21135
G01 X-44.22293 Y42.22994
G01 X-44.20444 Y42.31650
G01 X-44.18019 Y42.40794
G01 X-44.15329 Y42.48534
G01 X-44.12017 Y42.56748
G01 X-44.10701 Y42.59603
G01 X-44.03652 Y42.72283
G01 X-44.00734 Y42.77167
G01 X-43.98781 Y42.79669
G01 X-43.88064 Y42.92912
G01 X-43.87648 Y42.93354
G01 X-43.87259 Y42.93768
G01 X-43.81511 Y42.99801
G01 X-43.78357 Y43.03288
G01 X-43.73731 Y43.08663
G01 X-43.71938 Y43.10812
G01 X-43.69418 Y43.27205
G01 X-43.69223 Y43.30316
G01 X-43.69042 Y43.35998
G01 X-43.69042 Y48.01664
G01 X-43.69975 Y48.14616
G01 X-43.70978 Y48.21601
G01 X-43.71435 Y48.24463
G01 X-43.80762 Y48.36787
G01 X-43.82537 Y48.38764
G01 X-43.85862 Y48.42271
G01 X-46.46766 Y51.03175
G01 X-46.56581 Y51.11674
G01 X-46.62229 Y51.15903
G01 X-46.68478 Y51.19266
G01 X-46.74096 Y51.22291
G01 X-46.78915 Y51.23338
G01 X-46.88226 Y51.23561
G01 X-46.95196 Y51.23063
G01 X-47.04386 Y51.21519
G01 X-47.13118 Y51.18260
G01 X-47.21076 Y51.13409
G01 X-47.26669 Y51.09220
G01 X-47.33560 Y51.02954
G01 X-47.39141 Y50.95497
G01 X-47.43210 Y50.87120
G01 X-47.45651 Y50.80574
G01 X-47.47421 Y50.73302
G01 X-47.71353 Y50.73302
G01 X-47.80969 Y50.91290
G01 X-47.86306 Y50.99279
G01 X-48.06204 Y51.23523
G01 X-48.12996 Y51.30315
G01 X-48.37243 Y51.50213
G01 X-48.45229 Y51.55550
G01 X-48.72892 Y51.70335
G01 X-48.81764 Y51.74013
G01 X-48.84032 Y51.74704
G01 X-49.13024 Y51.79004
G01 X-49.21706 Y51.79860
G01 X-49.53075 Y51.81402
G01 X-49.61363 Y51.81402
G01 X-49.92729 Y51.79860
G01 X-50.01411 Y51.79004
G01 X-50.30385 Y51.74706
G01 X-50.37573 Y51.74704
G01 X-50.40573 Y51.71046
G01 X-50.41170 Y51.70452
G01 X-50.41477 Y51.70206
G01 X-50.48203 Y51.65281
G01 X-50.61307 Y51.56525
G01 X-50.67654 Y51.52644
G01 X-50.69023 Y51.51882
G01 X-50.75373 Y51.47998
G01 X-50.82269 Y51.43391
G01 X-50.90374 Y51.38537
G01 X-50.93382 Y51.36932
G01 X-51.05188 Y51.33348
G01 X-51.14609 Y51.31473
G01 X-51.30217 Y51.29936
G01 X-51.39821 Y51.29936
G01 X-51.55429 Y51.31473
G01 X-51.64850 Y51.33348
G01 X-51.68799 Y51.34544
G01 X-51.68802 Y51.34547
G01 X-51.77517 Y51.39850
G01 X-51.79028 Y51.40622
G01 X-51.81964 Y51.42189
G01 X-51.86930 Y51.44955
G01 X-51.89983 Y51.46579
G01 X-51.97540 Y51.50416
G01 X-52.00753 Y51.52362
G01 X-52.08083 Y51.57310
G01 X-52.12962 Y51.60963
G01 X-52.20194 Y51.67274
G01 X-52.26574 Y51.73421
G01 X-52.26739 Y51.73596
G01 X-52.36452 Y51.85603
G01 X-52.38456 Y51.88176
G01 X-52.41332 Y51.92989
G01 X-52.47694 Y52.04440
G01 X-52.48779 Y52.06789
G01 X-52.52089 Y52.14996
G01 X-52.54471 Y52.21856
G01 X-52.56635 Y52.30005
G01 X-52.58482 Y52.38656
G01 X-52.58710 Y52.40061
G01 X-52.58751 Y52.40536
G01 X-52.60803 Y52.53401
G01 X-52.60984 Y52.54170
G01 X-52.62208 Y52.60337
G01 X-52.62713 Y52.63408
G01 X-52.63483 Y52.66527
G01 X-52.63709 Y52.67434
G01 X-52.64639 Y52.69332
G01 X-52.70250 Y52.76771
G01 X-52.77163 Y52.83015
G01 X-52.82772 Y52.87183
G01 X-52.90742 Y52.92004
G01 X-52.99480 Y52.95227
G01 X-53.08670 Y52.96741
G01 X-53.15639 Y52.97216
G01 X-53.24926 Y52.96967
G01 X-53.29579 Y52.95941
G01 X-53.41540 Y52.89484
G01 X-53.47153 Y52.85275
G01 X-53.56899 Y52.76827
G01 X-54.26838 Y52.06891
G01 X-54.35334 Y51.97076
G01 X-54.39566 Y51.91425
G01 X-54.43770 Y51.84336
G01 X-54.43770 Y51.84333
G01 X-54.45578 Y51.81288
G01 X-54.47001 Y51.74742
G01 X-54.47062 Y51.72184
G01 X-54.90777 Y51.28303
G01 X-54.99800 Y51.28306
G01 X-55.06787 Y51.25413
G01 X-55.11141 Y51.23482
G01 X-55.29960 Y51.14580
G01 X-55.36513 Y51.11085
G01 X-55.53848 Y51.00693
G01 X-55.58791 Y50.97394
G01 X-55.74709 Y50.85591
G01 X-55.78667 Y50.82342
G01 X-55.93211 Y50.69162
G01 X-55.96642 Y50.65730
G01 X-56.09822 Y50.51186
G01 X-56.13071 Y50.47229
G01 X-56.24874 Y50.31311
G01 X-56.27366 Y50.27679
G01 X-56.27605 Y50.26195
G01 X-56.30513 Y50.06591
G01 X-56.31026 Y50.01392
G01 X-56.31989 Y49.81786
G01 X-56.31989 Y49.76820
G01 X-56.31026 Y49.57214
G01 X-56.30513 Y49.52012
G01 X-56.27605 Y49.32411
G01 X-56.26421 Y49.26472
G01 X-56.21511 Y49.06869
G01 X-56.19312 Y48.99637
G01 X-56.12299 Y48.80033
G01 X-56.08479 Y48.70839
G01 X-56.08316 Y48.70493
G01 X-56.08319 Y48.64618
G01 X-55.89860 Y48.46160
G01 X-55.86632 Y48.42596
G01 X-55.74196 Y48.27443
G01 X-55.68857 Y48.19457
G01 X-55.59617 Y48.02167
G01 X-55.55941 Y47.93292
G01 X-55.50848 Y47.76511
G01 X-55.51026 Y47.74293
G01 X-55.50927 Y47.69015
G01 X-55.50940 Y47.64862
G01 X-55.51008 Y47.62104
G01 X-55.50554 Y47.50369
G01 X-55.50300 Y47.45225
G01 X-55.50193 Y47.40798
G01 X-55.50193 Y42.41952
G01 X-55.49261 Y42.29009
G01 X-55.48258 Y42.22021
G01 X-55.46218 Y42.15067
G01 X-55.46218 Y41.88501
G01 X-55.65220 Y41.69499
G01 X-55.80218 Y41.39502
G01 X-55.80218 Y38.74399
G01 X-55.80254 Y38.72923
G01 X-55.81217 Y38.53322
G01 X-55.81529 Y38.50157
G01 X-55.84437 Y38.30554
G01 X-55.85205 Y38.26708
G01 X-55.90114 Y38.07107
G01 X-55.91643 Y38.02078
G01 X-55.98659 Y37.82474
G01 X-55.99949 Y37.79131
G01 X-56.14219 Y37.44679
G01 X-56.14219 Y36.02622
G01 X-56.89339 Y35.27501
G01 X-56.98618 Y35.27501
G01 X-57.07620 Y35.18502
G01 X-57.27617 Y34.78502
G01 X-57.27617 Y34.36249
G01 X-57.27632 Y34.36193
G01 X-57.28397 Y34.32350
G01 X-57.31305 Y34.12747
G01 X-57.31618 Y34.09582
G01 X-57.32580 Y33.89978
G01 X-57.32580 Y33.87029
G01 X-57.31618 Y33.67428
G01 X-57.31305 Y33.64263
G01 X-57.28397 Y33.44659
G01 X-57.27632 Y33.40816
G01 X-57.27617 Y33.40760
G01 X-57.27617 Y32.98502
G01 X-57.07620 Y32.58508
G01 X-56.98613 Y32.49501
G01 X-56.70777 Y32.49501
G01 X-56.70112 Y32.49226
G01 X-56.51351 Y32.43534
G01 X-56.41930 Y32.41660
G01 X-56.22421 Y32.39740
G01 X-56.12817 Y32.39740
G01 X-55.93307 Y32.41660
G01 X-55.83886 Y32.43534
G01 X-55.65126 Y32.49226
G01 X-55.64460 Y32.49501
G01 X-55.27618 Y32.49501
G01 X-55.18060 Y32.50443
G01 X-55.08867 Y32.53232
G01 X-55.00396 Y32.57758
G01 X-54.92969 Y32.63852
G01 X-54.86876 Y32.71279
G01 X-54.82350 Y32.79750
G01 X-54.79561 Y32.88942
G01 X-54.78619 Y32.98502
G01 X-54.78619 Y33.16785
G01 X-54.25065 Y33.70339
G01 X-54.20064 Y33.84319
G01 X-54.16742 Y33.92361
G01 X-54.07839 Y34.11182
G01 X-54.04816 Y34.16846
G01 X-53.94428 Y34.34182
G01 X-53.91649 Y34.38345
G01 X-53.79846 Y34.54260
G01 X-53.79297 Y34.54984
G01 X-53.78007 Y34.56650
G01 X-53.77252 Y34.57595
G01 X-53.65581 Y34.71814
G01 X-53.64827 Y34.72759
G01 X-53.62980 Y34.75144
G01 X-53.62203 Y34.76120
G01 X-53.50318 Y34.90603
G01 X-53.49531 Y34.91583
G01 X-53.47013 Y34.94806
G01 X-53.46135 Y34.95904
G01 X-53.33569 Y35.11215
G01 X-53.32683 Y35.12320
G01 X-53.28517 Y35.17590
G01 X-53.27425 Y35.18947
G01 X-53.16876 Y35.31796
G01 X-53.11349 Y35.33473
G01 X-53.01928 Y35.35347
G01 X-52.82419 Y35.37268
G01 X-52.77618 Y35.37504
G01 X-52.52198 Y35.37504
G01 X-52.56074 Y35.38347
G01 X-52.67153 Y35.39140
G01 X-52.75749 Y35.40531
G01 X-52.80016 Y35.41619
G01 X-52.90625 Y35.45680
G01 X-53.00013 Y35.52076
G01 X-53.05294 Y35.56653
G01 X-53.11720 Y35.63394
G01 X-53.14380 Y35.67534
G01 X-53.18256 Y35.80448
G01 X-53.19261 Y35.87435
G01 X-53.20194 Y36.00381
G01 X-53.20194 Y41.39502
G01 X-53.20305 Y41.44035
G01 X-53.20504 Y41.45986
G01 X-53.23066 Y41.55684
G01 X-53.27351 Y41.64094
G01 X-53.33292 Y41.71427
G01 X-53.40625 Y41.77368
G01 X-53.49035 Y41.81653
G01 X-53.58741 Y41.84218
G01 X-53.60691 Y41.84414
G01 X-53.65215 Y41.84528
G01 X-54.92766 Y41.84528
G01 X-55.02446 Y41.85049
G01 X-55.07717 Y41.85615
G01 X-55.24549 Y41.89659
G01 X-55.30003 Y41.93637
G01 X-55.35283 Y41.98211
G01 X-55.41715 Y42.04955
G01 X-55.44547 Y42.09362
G01 X-55.46218 Y42.15064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.19739 Y41.88503 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.19739 Y41.88503
G01 X-55.46218 Y41.88501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.50848 Y47.76511 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.50848 Y47.76511
G01 X-55.50732 Y47.77984
G01 X-55.50663 Y47.78261
G01 X-55.46807 Y47.86640
G01 X-55.41448 Y47.94148
G01 X-55.36871 Y47.99429
G01 X-55.30130 Y48.05855
G01 X-55.22296 Y48.10890
G01 X-55.13650 Y48.14349
G01 X-55.06947 Y48.16318
G01 X-54.99038 Y48.17455
G01 X-54.99091 Y48.17847
G01 X-54.80783 Y48.20364
G01 X-54.90722 Y48.30303
G01 X-55.06785 Y48.30300
G01 X-55.11590 Y48.30536
G01 X-55.31097 Y48.32459
G01 X-55.40518 Y48.34334
G01 X-55.59279 Y48.40023
G01 X-55.68154 Y48.43699
G01 X-55.85441 Y48.52939
G01 X-55.93429 Y48.58276
G01 X-56.08316 Y48.70493
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.99800 Y51.28306 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.99800 Y51.28306
G01 X-54.43770 Y51.84333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.41540 Y52.89484 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.41540 Y52.89484
G01 X-53.35195 Y52.92910
G01 X-52.08624 Y54.19479
G01 X-49.70507 Y56.57599
G01 X-38.34593 Y56.57599
G01 X-38.29790 Y56.57832
G01 X-38.05404 Y56.60235
G01 X-38.02114 Y56.60890
G01 X-37.95983 Y56.62110
G01 X-37.72534 Y56.69222
G01 X-37.63659 Y56.72900
G01 X-37.42046 Y56.84449
G01 X-37.35417 Y56.88881
G01 X-37.34375 Y56.90174
G01 X-37.33529 Y56.91210
G01 X-37.28988 Y56.96692
G01 X-37.19864 Y57.06242
G01 X-37.17570 Y57.08322
G01 X-37.14365 Y57.11373
G01 X-35.28371 Y58.97369
G01 X-35.25704 Y58.99930
G01 X-35.24203 Y59.01312
G01 X-35.10596 Y59.11682
G01 X-35.04800 Y59.15317
G01 X-35.04500 Y59.15421
G01 X-34.95450 Y59.17636
G01 X-34.86146 Y59.18098
G01 X-34.76923 Y59.16790
G01 X-34.70131 Y59.15157
G01 X-34.67375 Y59.14210
G01 X-34.59880 Y59.21705
G01 X-34.61411 Y59.29409
G01 X-34.63814 Y59.53796
G01 X-34.63812 Y59.56305
G01 X-34.60995 Y59.63125
G01 X-34.49867 Y59.86650
G01 X-34.46367 Y59.93211
G01 X-34.33380 Y60.14880
G01 X-34.30213 Y60.19625
G01 X-34.15455 Y60.39523
G01 X-34.12443 Y60.43199
G01 X-33.95966 Y60.61375
G01 X-33.92824 Y60.64517
G01 X-33.74648 Y60.80994
G01 X-33.70972 Y60.84006
G01 X-33.51074 Y60.98764
G01 X-33.46329 Y61.01931
G01 X-33.24660 Y61.14918
G01 X-33.18102 Y61.18418
G01 X-32.97355 Y61.28233
G01 X-32.94340 Y61.27153
G01 X-32.86093 Y61.23747
G01 X-32.62568 Y61.12619
G01 X-32.57028 Y61.09665
G01 X-32.35362 Y60.96678
G01 X-32.31511 Y60.94108
G01 X-32.11610 Y60.79350
G01 X-32.08735 Y60.76991
G01 X-31.90559 Y60.60514
G01 X-31.89314 Y60.59333
G01 X-29.87851 Y58.57867
G01 X-29.86607 Y58.56684
G01 X-29.68430 Y58.40209
G01 X-29.65553 Y58.37847
G01 X-29.45654 Y58.23090
G01 X-29.41804 Y58.20522
G01 X-29.20137 Y58.07535
G01 X-29.14600 Y58.04581
G01 X-28.91075 Y57.93453
G01 X-28.87120 Y57.91700
G01 X-28.79571 Y57.88574
G01 X-26.95868 Y57.88574
G01 X-26.86188 Y57.88053
G01 X-26.80918 Y57.87487
G01 X-26.64085 Y57.83443
G01 X-26.58632 Y57.79465
G01 X-26.53351 Y57.74891
G01 X-26.46920 Y57.68147
G01 X-26.44088 Y57.63740
G01 X-26.40377 Y57.51081
G01 X-26.39373 Y57.44093
G01 X-26.38444 Y57.31149
G01 X-26.38444 Y54.22938
G01 X-26.38492 Y54.19974
G01 X-26.38545 Y54.18353
G01 X-26.38690 Y54.15420
G01 X-26.38774 Y54.14114
G01 X-26.38952 Y54.12575
G01 X-26.39201 Y54.07513
G01 X-26.39310 Y54.03088
G01 X-26.39310 Y53.78577
G01 X-26.39313 Y53.77802
G01 X-26.39315 Y53.77508
G01 X-26.39379 Y53.74803
G01 X-26.39551 Y53.70342
G01 X-26.40001 Y53.64124
G01 X-26.40753 Y53.57028
G01 X-26.41284 Y53.53220
G01 X-26.41284 Y53.53218
G01 X-26.43455 Y53.48148
G01 X-26.48683 Y53.40424
G01 X-26.52089 Y53.37020
G01 X-26.56214 Y53.34965
G01 X-26.58804 Y53.33627
G01 X-26.62327 Y53.31737
G01 X-26.62523 Y53.31633
G01 X-26.70262 Y53.27460
G01 X-26.72307 Y53.26390
G01 X-26.73689 Y53.25555
G01 X-26.81019 Y53.20627
G01 X-26.82749 Y53.19334
G01 X-26.84057 Y53.18150
G01 X-26.90300 Y53.11907
G01 X-26.91504 Y53.10579
G01 X-26.92780 Y53.08872
G01 X-26.97738 Y53.01501
G01 X-26.98444 Y53.00330
G01 X-26.99549 Y52.98026
G01 X-27.01255 Y52.94249
G01 X-27.02983 Y52.89873
G01 X-27.03321 Y52.88948
G01 X-27.04060 Y52.86101
G01 X-27.05858 Y52.77467
G01 X-27.06074 Y52.76091
G01 X-27.06198 Y52.73561
G01 X-27.06310 Y52.69118
G01 X-27.06310 Y48.49117
G01 X-27.06198 Y48.44674
G01 X-27.06074 Y48.42144
G01 X-27.05858 Y48.40768
G01 X-27.04057 Y48.32127
G01 X-27.03318 Y48.29287
G01 X-27.02980 Y48.28355
G01 X-26.99556 Y48.20224
G01 X-26.98444 Y48.17908
G01 X-26.97743 Y48.16744
G01 X-26.92780 Y48.09363
G01 X-26.91504 Y48.07656
G01 X-26.90300 Y48.06328
G01 X-26.84057 Y48.00084
G01 X-26.82749 Y47.98901
G01 X-26.81019 Y47.97608
G01 X-26.73689 Y47.92680
G01 X-26.72493 Y47.91956
G01 X-26.70214 Y47.90862
G01 X-26.67992 Y47.89830
G01 X-26.66816 Y47.89315
G01 X-26.62089 Y47.87283
G01 X-26.58490 Y47.85642
G01 X-26.57369 Y47.85101
G01 X-26.52175 Y47.82784
G01 X-26.49871 Y47.81840
G01 X-26.46950 Y47.80570
G01 X-26.44837 Y47.78733
G01 X-26.39561 Y47.72266
G01 X-26.35459 Y47.64999
G01 X-26.32556 Y47.58644
G01 X-26.29508 Y47.49836
G01 X-26.28182 Y47.40610
G01 X-26.28627 Y47.31301
G01 X-26.29622 Y47.24385
G01 X-26.31820 Y47.15337
G01 X-26.35685 Y47.06866
G01 X-26.41085 Y46.99282
G01 X-26.45660 Y46.94001
G01 X-26.52404 Y46.87573
G01 X-26.60240 Y46.82533
G01 X-26.68891 Y46.79071
G01 X-26.75594 Y46.77103
G01 X-26.89401 Y46.75116
G01 X-27.25820 Y46.75116
G01 X-27.25820 Y46.63117
G01 X-23.81292 Y46.63117
G01 X-23.39285 Y47.05124
G01 X-23.39285 Y47.80666
G01 X-23.38653 Y47.81367
G01 X-23.31437 Y47.90123
G01 X-23.28528 Y47.94042
G01 X-23.23814 Y48.01072
G01 X-23.21465 Y48.04994
G01 X-23.18361 Y48.10785
G01 X-23.16506 Y48.14705
G01 X-23.14457 Y48.19642
G01 X-23.13055 Y48.23562
G01 X-23.11736 Y48.27892
G01 X-23.10753 Y48.31817
G01 X-23.09969 Y48.35751
G01 X-23.09387 Y48.39670
G01 X-23.09021 Y48.43384
G01 X-23.08831 Y48.47303
G01 X-23.08785 Y48.49117
G01 X-23.08785 Y50.59116
G01 X-23.08739 Y50.60937
G01 X-23.08257 Y50.70742
G01 X-23.07886 Y50.74503
G01 X-23.06433 Y50.84305
G01 X-23.05600 Y50.88476
G01 X-23.03786 Y50.95725
G01 X-23.03786 Y52.69118
G01 X-23.03784 Y52.71442
G01 X-23.03784 Y53.22552
G01 X-23.02481 Y53.23624
G01 X-22.94495 Y53.28961
G01 X-22.91038 Y53.30807
G01 X-22.82163 Y53.34485
G01 X-22.78412 Y53.35623
G01 X-22.68991 Y53.37495
G01 X-22.65087 Y53.37881
G01 X-22.62034 Y53.38031
G01 X-22.60286 Y53.38117
G01 X-22.20286 Y53.38117
G01 X-22.15483 Y53.37881
G01 X-22.14952 Y53.37828
G01 X-22.14675 Y53.37675
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.40377 Y57.51081 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.40377 Y57.51081
G01 X-26.42419 Y57.58043
G01 X-26.42419 Y57.84599
G01 X-26.68886 Y57.84599
G01 X-26.80918 Y57.87487
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.06681 Y61.32596 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.06681 Y61.32596
G01 X-26.80118 Y61.32596
G01 X-26.80118 Y61.59068
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.35353 Y58.73778 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.35353 Y58.73778
G01 X-23.44419 Y58.56818
G01 X-23.44419 Y54.03954
G01 X-23.44655 Y53.99154
G01 X-23.45285 Y53.92755
G01 X-23.45285 Y53.74803
G01 X-23.45521 Y53.70002
G01 X-23.47441 Y53.50492
G01 X-23.49316 Y53.41071
G01 X-23.50212 Y53.38117
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.03784 Y53.22552 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.03784 Y53.22552
G01 X-23.05089 Y53.23624
G01 X-23.13075 Y53.28961
G01 X-23.16532 Y53.30807
G01 X-23.25407 Y53.34485
G01 X-23.29158 Y53.35623
G01 X-23.38582 Y53.37495
G01 X-23.42483 Y53.37881
G01 X-23.47286 Y53.38117
G01 X-23.50212 Y53.38117
G01 X-23.66725 Y53.25870
G01 X-23.73474 Y53.21343
G01 X-23.87284 Y53.13065
G01 X-23.89501 Y53.11663
G01 X-23.92811 Y53.09453
G01 X-23.93199 Y53.09197
G01 X-23.96367 Y53.07127
G01 X-23.96699 Y53.06906
G01 X-24.00105 Y53.04630
G01 X-24.02930 Y53.02537
G01 X-24.06019 Y53.00002
G01 X-24.08355 Y52.97886
G01 X-24.11142 Y52.95100
G01 X-24.11795 Y52.94427
G01 X-24.13199 Y52.92933
G01 X-24.13857 Y52.92255
G01 X-24.15975 Y52.90137
G01 X-24.18091 Y52.87803
G01 X-24.20626 Y52.84714
G01 X-24.22701 Y52.81907
G01 X-24.24980 Y52.78498
G01 X-24.25246 Y52.78095
G01 X-24.25546 Y52.74864
G01 X-24.25739 Y52.70942
G01 X-24.25785 Y52.69118
G01 X-24.25785 Y50.59116
G01 X-24.25828 Y50.57295
G01 X-24.26311 Y50.47496
G01 X-24.26682 Y50.43734
G01 X-24.28137 Y50.33932
G01 X-24.28968 Y50.29761
G01 X-24.30786 Y50.22507
G01 X-24.30786 Y48.49117
G01 X-24.30784 Y48.46792
G01 X-24.30784 Y47.95678
G01 X-24.29481 Y47.94611
G01 X-24.21495 Y47.89272
G01 X-24.18038 Y47.87425
G01 X-24.09163 Y47.83750
G01 X-24.06283 Y47.82876
G01 X-24.05412 Y47.82612
G01 X-23.95991 Y47.80737
G01 X-23.92087 Y47.80351
G01 X-23.87286 Y47.80117
G01 X-23.47286 Y47.80117
G01 X-23.42483 Y47.80351
G01 X-23.39285 Y47.80666
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-25.57784 Y47.95678 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.57784 Y47.95678
G01 X-25.59089 Y47.94611
G01 X-25.67075 Y47.89272
G01 X-25.70532 Y47.87425
G01 X-25.79407 Y47.83750
G01 X-25.83158 Y47.82612
G01 X-25.92582 Y47.80737
G01 X-25.96483 Y47.80351
G01 X-26.01286 Y47.80117
G01 X-26.41286 Y47.80117
G01 X-26.46087 Y47.80351
G01 X-26.46554 Y47.80399
G01 X-26.46950 Y47.80570
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.30784 Y47.95678 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.30784 Y47.95678
G01 X-24.32089 Y47.94611
G01 X-24.40075 Y47.89272
G01 X-24.43532 Y47.87425
G01 X-24.52407 Y47.83750
G01 X-24.56158 Y47.82612
G01 X-24.65582 Y47.80737
G01 X-24.69483 Y47.80351
G01 X-24.74286 Y47.80117
G01 X-25.14286 Y47.80117
G01 X-25.19087 Y47.80351
G01 X-25.22991 Y47.80737
G01 X-25.32412 Y47.82612
G01 X-25.33283 Y47.82876
G01 X-25.36163 Y47.83750
G01 X-25.45038 Y47.87425
G01 X-25.48495 Y47.89272
G01 X-25.56481 Y47.94611
G01 X-25.57784 Y47.95678
G01 X-25.57784 Y50.22512
G01 X-25.59600 Y50.29761
G01 X-25.60433 Y50.33932
G01 X-25.61886 Y50.43734
G01 X-25.62257 Y50.47496
G01 X-25.62739 Y50.57295
G01 X-25.62785 Y50.59116
G01 X-25.62785 Y52.69118
G01 X-25.62831 Y52.70932
G01 X-25.63021 Y52.74851
G01 X-25.63321 Y52.78095
G01 X-25.63588 Y52.78498
G01 X-25.65866 Y52.81907
G01 X-25.67949 Y52.84721
G01 X-25.70484 Y52.87810
G01 X-25.72587 Y52.90132
G01 X-25.74710 Y52.92255
G01 X-25.75363 Y52.92928
G01 X-25.76773 Y52.94427
G01 X-25.77425 Y52.95100
G01 X-25.80212 Y52.97886
G01 X-25.82549 Y53.00002
G01 X-25.85637 Y53.02537
G01 X-25.88462 Y53.04630
G01 X-25.91868 Y53.06906
G01 X-25.92201 Y53.07127
G01 X-25.95371 Y53.09197
G01 X-25.95757 Y53.09453
G01 X-25.99069 Y53.11666
G01 X-26.01284 Y53.13068
G01 X-26.15094 Y53.21343
G01 X-26.21842 Y53.25870
G01 X-26.38355 Y53.38117
G01 X-26.39254 Y53.41071
G01 X-26.41129 Y53.50492
G01 X-26.41350 Y53.52750
G01 X-26.41284 Y53.53218
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.56214 Y53.34965 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.56214 Y53.34965
G01 X-26.51893 Y53.37117
G01 X-26.49991 Y53.37495
G01 X-26.46087 Y53.37881
G01 X-26.41286 Y53.38117
G01 X-26.38355 Y53.38117
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.78628 Y58.56580 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.78628 Y58.56580
G01 X-18.54272 Y58.32226
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.86089 Y56.43969 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.86089 Y56.43969
G01 X-16.84984 Y56.41302
G01 X-16.77874 Y56.17853
G01 X-16.76000 Y56.08432
G01 X-16.73762 Y55.85717
G01 X-16.18174 Y55.85717
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.64466 Y55.60317 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.64466 Y55.60317
G01 X-13.59772 Y55.60317
G01 X-13.47019 Y55.73070
G01 X-13.47019 Y55.74548
G01 X-13.50707 Y55.70469
G01 X-13.57308 Y55.64393
G01 X-13.63450 Y55.60540
G01 X-13.64466 Y55.60317
G01 X-13.73824 Y55.58277
G01 X-13.80811 Y55.57274
G01 X-13.93757 Y55.56341
G01 X-15.04344 Y55.56341
G01 X-15.16196 Y55.57124
G01 X-15.20125 Y55.57639
G01 X-15.22457 Y55.58561
G01 X-15.33287 Y55.63682
G01 X-15.34126 Y55.64147
G01 X-15.40173 Y55.67007
G01 X-15.48344 Y55.70395
G01 X-15.54654 Y55.72651
G01 X-15.71786 Y55.77543
G01 X-15.72487 Y55.77738
G01 X-15.76071 Y55.78653
G01 X-15.80468 Y55.79268
G01 X-15.95050 Y55.80946
G01 X-16.00148 Y55.81681
G01 X-16.02911 Y55.82158
G01 X-16.04771 Y55.82501
G01 X-16.09284 Y55.83375
G01 X-16.18174 Y55.85717
G01 X-16.18537 Y55.85813
G01 X-16.21181 Y55.87408
G01 X-16.26777 Y55.91594
G01 X-16.33676 Y55.97863
G01 X-16.39261 Y56.05325
G01 X-16.43338 Y56.13710
G01 X-16.45779 Y56.20255
G01 X-16.48187 Y56.29255
G01 X-16.48852 Y56.38546
G01 X-16.48255 Y56.43552
G01 X-16.81486 Y56.43552
G01 X-16.85822 Y56.43763
G01 X-16.86089 Y56.43969
G01 X-16.86091 Y56.43971
G01 X-16.86259 Y56.44098
G01 X-16.92134 Y56.48320
G01 X-17.09332 Y56.59813
G01 X-17.14923 Y56.63928
G01 X-17.15210 Y56.64159
G01 X-17.20137 Y56.67804
G01 X-17.36414 Y56.78675
G01 X-17.40287 Y56.81546
G01 X-17.41151 Y56.82257
G01 X-17.42949 Y56.83656
G01 X-17.60132 Y56.96402
G01 X-17.63079 Y56.98818
G01 X-17.81255 Y57.15292
G01 X-17.83741 Y57.17781
G01 X-18.00218 Y57.35958
G01 X-18.02634 Y57.38901
G01 X-18.17391 Y57.58802
G01 X-18.20010 Y57.62729
G01 X-18.33000 Y57.84395
G01 X-18.36002 Y57.90021
G01 X-18.47125 Y58.13547
G01 X-18.50576 Y58.21896
G01 X-18.54272 Y58.32226
G01 X-18.52847 Y58.46740
G01 X-18.51623 Y58.52899
G01 X-18.51963 Y58.52841
G01 X-18.58936 Y58.52343
G01 X-18.68247 Y58.52566
G01 X-18.73231 Y58.53651
G01 X-18.78628 Y58.56580
G01 X-18.84938 Y58.60006
G01 X-18.90584 Y58.64235
G01 X-19.00394 Y58.72729
G01 X-19.76373 Y59.48705
G01 X-19.79697 Y59.52213
G01 X-19.81473 Y59.54189
G01 X-19.90802 Y59.66516
G01 X-19.91257 Y59.69376
G01 X-19.92260 Y59.76361
G01 X-19.93192 Y59.89312
G01 X-19.93192 Y65.42179
G01 X-19.93170 Y65.44257
G01 X-19.93142 Y65.45415
G01 X-19.91506 Y65.60635
G01 X-19.91066 Y65.62923
G01 X-19.88648 Y65.67020
G01 X-19.81221 Y65.77780
G01 X-19.78544 Y65.81117
G01 X-19.77902 Y65.81927
G01 X-19.73733 Y65.88567
G01 X-19.64168 Y66.05379
G01 X-19.57129 Y66.19702
G01 X-19.53614 Y66.27830
G01 X-19.52786 Y66.30048
G01 X-19.44800 Y66.56017
G01 X-19.43441 Y66.61620
G01 X-19.41780 Y66.70312
G01 X-19.40030 Y66.82750
G01 X-19.38229 Y67.05420
G01 X-19.37986 Y67.09849
G01 X-19.38229 Y67.14282
G01 X-19.40030 Y67.36949
G01 X-19.41780 Y67.49390
G01 X-19.43441 Y67.58084
G01 X-19.44800 Y67.63685
G01 X-19.52786 Y67.89656
G01 X-19.53614 Y67.91871
G01 X-19.57127 Y67.99999
G01 X-19.64168 Y68.14325
G01 X-19.72179 Y68.28404
G01 X-19.73733 Y68.31134
G01 X-19.77899 Y68.37769
G01 X-19.78544 Y68.38584
G01 X-19.94894 Y68.58973
G01 X-20.01051 Y68.65767
G01 X-20.07305 Y68.72018
G01 X-20.14097 Y68.78175
G01 X-20.34483 Y68.94520
G01 X-20.35298 Y68.95168
G01 X-20.41930 Y68.99331
G01 X-20.58763 Y69.08909
G01 X-20.73065 Y69.15940
G01 X-20.81201 Y69.19453
G01 X-20.83408 Y69.20281
G01 X-21.09385 Y69.28269
G01 X-21.14988 Y69.29628
G01 X-21.23677 Y69.31289
G01 X-21.36118 Y69.33039
G01 X-21.58788 Y69.34838
G01 X-21.63217 Y69.35081
G01 X-21.67650 Y69.34838
G01 X-21.90317 Y69.33039
G01 X-22.02758 Y69.31287
G01 X-22.11447 Y69.29628
G01 X-22.17053 Y69.28269
G01 X-22.43022 Y69.20288
G01 X-22.45234 Y69.19455
G01 X-22.53370 Y69.15940
G01 X-22.55033 Y69.15122
G01 X-22.60822 Y69.12524
G01 X-22.64043 Y69.11210
G01 X-22.77789 Y69.07286
G01 X-22.79824 Y69.06707
G01 X-22.83883 Y69.06854
G01 X-22.90799 Y69.07853
G01 X-22.99847 Y69.10047
G01 X-23.08317 Y69.13913
G01 X-23.15902 Y69.19313
G01 X-23.21183 Y69.23888
G01 X-23.27611 Y69.30634
G01 X-23.30278 Y69.34782
G01 X-23.34157 Y69.47693
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-22.77789 Y69.07286 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-22.77789 Y69.07286
G01 X-22.86319 Y69.02727
G01 X-22.94307 Y68.97393
G01 X-23.21584 Y68.75008
G01 X-23.28376 Y68.68213
G01 X-23.32117 Y68.63654
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.06816 Y56.12003 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.06816 Y56.12003
G01 X-43.70698 Y56.12003
G01 X-43.80198 Y56.17080
G01 X-43.89073 Y56.20756
G01 X-44.11585 Y56.27586
G01 X-44.21006 Y56.29460
G01 X-44.44417 Y56.31764
G01 X-44.54021 Y56.31764
G01 X-44.77432 Y56.29460
G01 X-44.86853 Y56.27586
G01 X-45.09365 Y56.20756
G01 X-45.18239 Y56.17080
G01 X-45.31359 Y56.10068
G01 X-45.38986 Y56.05991
G01 X-45.46972 Y56.00654
G01 X-45.65156 Y55.85732
G01 X-45.71950 Y55.78940
G01 X-45.86873 Y55.60756
G01 X-45.92209 Y55.52768
G01 X-46.03299 Y55.32021
G01 X-46.06974 Y55.23146
G01 X-46.13802 Y55.00637
G01 X-46.15676 Y54.91216
G01 X-46.17983 Y54.67805
G01 X-46.17983 Y54.58198
G01 X-46.15676 Y54.34787
G01 X-46.13802 Y54.25366
G01 X-46.06974 Y54.02854
G01 X-46.03299 Y53.93980
G01 X-45.92209 Y53.73235
G01 X-45.86873 Y53.65247
G01 X-45.71950 Y53.47063
G01 X-45.65156 Y53.40271
G01 X-45.46972 Y53.25346
G01 X-45.38986 Y53.20010
G01 X-45.18239 Y53.08923
G01 X-45.09365 Y53.05245
G01 X-44.86853 Y52.98417
G01 X-44.77432 Y52.96543
G01 X-44.54021 Y52.94236
G01 X-44.44417 Y52.94236
G01 X-44.21006 Y52.96543
G01 X-44.11585 Y52.98417
G01 X-43.89073 Y53.05245
G01 X-43.80198 Y53.08923
G01 X-43.70691 Y53.14003
G01 X-37.10540 Y53.14003
G01 X-35.84840 Y51.88301
G01 X-35.93220 Y51.88301
G01 X-36.02778 Y51.87361
G01 X-36.11970 Y51.84572
G01 X-36.20441 Y51.80043
G01 X-36.27868 Y51.73950
G01 X-36.33961 Y51.66525
G01 X-36.38488 Y51.58052
G01 X-36.41276 Y51.48859
G01 X-36.42219 Y51.39301
G01 X-36.42219 Y48.19302
G01 X-36.41276 Y48.09741
G01 X-36.38488 Y48.00549
G01 X-36.33961 Y47.92078
G01 X-36.27868 Y47.84654
G01 X-36.20441 Y47.78560
G01 X-36.11970 Y47.74032
G01 X-36.02778 Y47.71243
G01 X-35.93220 Y47.70300
G01 X-35.82219 Y47.70300
G01 X-35.82219 Y44.70916
G01 X-37.03133 Y43.50001
G01 X-39.49018 Y43.50001
G01 X-39.53818 Y43.49765
G01 X-39.73328 Y43.47845
G01 X-39.82749 Y43.45971
G01 X-40.01509 Y43.40278
G01 X-40.10384 Y43.36603
G01 X-40.27671 Y43.27362
G01 X-40.35660 Y43.22026
G01 X-40.50813 Y43.09590
G01 X-40.57605 Y43.02798
G01 X-40.70041 Y42.87644
G01 X-40.75378 Y42.79656
G01 X-40.84618 Y42.62369
G01 X-40.88294 Y42.53494
G01 X-40.93986 Y42.34734
G01 X-40.95860 Y42.25313
G01 X-40.97781 Y42.05803
G01 X-40.97781 Y41.96199
G01 X-40.95860 Y41.76690
G01 X-40.93986 Y41.67269
G01 X-40.88294 Y41.48508
G01 X-40.84618 Y41.39634
G01 X-40.75378 Y41.22346
G01 X-40.70041 Y41.14358
G01 X-40.57839 Y40.99497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.86808 Y39.80002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.86808 Y39.80002
G01 X-42.05522 Y39.80002
G01 X-42.05408 Y39.84874
G01 X-42.05908 Y39.91844
G01 X-42.06947 Y39.98509
G01 X-42.09523 Y40.02712
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-47.57172 Y48.85301 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.57172 Y48.85301
G01 X-47.61173 Y48.76411
G01 X-47.75005 Y48.53529
G01 X-47.91495 Y48.32482
G01 X-48.10398 Y48.13579
G01 X-48.31444 Y47.97092
G01 X-48.33619 Y47.95779
G01 X-48.33619 Y48.11362
G01 X-48.12996 Y48.28286
G01 X-48.06204 Y48.35078
G01 X-47.86306 Y48.59325
G01 X-47.80969 Y48.67311
G01 X-47.71353 Y48.85301
G01 X-47.57172 Y48.85301
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.68478 Y51.19266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.68478 Y51.19266
G01 X-47.23916 Y51.74704
G01 X-48.84032 Y51.74704
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.30385 Y51.74706 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.30385 Y51.74706
G01 X-50.32673 Y51.74013
G01 X-50.41063 Y51.70536
G01 X-50.41477 Y51.70206
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.93382 Y51.36932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.93382 Y51.36932
G01 X-51.01441 Y51.30315
G01 X-51.03453 Y51.28303
G01 X-51.64179 Y51.28303
G01 X-51.67451 Y51.33574
G01 X-51.67862 Y51.33975
G01 X-51.68799 Y51.34544
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.78349 Y55.41902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.78349 Y55.41902
G01 X-55.86259 Y55.44302
G01 X-55.95131 Y55.47977
G01 X-56.08964 Y55.55369
G01 X-56.16949 Y55.60705
G01 X-56.29073 Y55.70654
G01 X-56.35865 Y55.77446
G01 X-56.45814 Y55.89570
G01 X-56.51151 Y55.97558
G01 X-56.58544 Y56.11388
G01 X-56.62220 Y56.20263
G01 X-56.66772 Y56.35269
G01 X-56.68646 Y56.44690
G01 X-56.70183 Y56.60299
G01 X-56.70183 Y56.69905
G01 X-56.69593 Y56.75879
G01 X-56.73256 Y56.79542
G01 X-58.57785 Y54.95013
G01 X-58.57785 Y53.26484
G01 X-58.57782 Y52.62469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.69168 Y48.86328 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.69168 Y48.86328
G01 X-65.69168 Y48.98106
G01 X-65.72823 Y49.01105
G01 X-65.79615 Y49.07897
G01 X-65.82614 Y49.11552
G01 X-65.95515 Y49.11552
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.74218 Y44.40100 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.74218 Y44.40100
G01 X-60.75071 Y44.41238
G01 X-60.78719 Y44.41596
G01 X-62.48719 Y44.41596
G01 X-62.58279 Y44.40657
G01 X-62.67471 Y44.37868
G01 X-62.75942 Y44.33339
G01 X-62.83367 Y44.27245
G01 X-62.89460 Y44.19821
G01 X-62.93989 Y44.11350
G01 X-62.96778 Y44.02158
G01 X-62.97718 Y43.92597
G01 X-62.97718 Y43.91597
G01 X-63.55442 Y43.91597
G01 X-63.58010 Y43.95437
G01 X-63.72559 Y44.13169
G01 X-63.79351 Y44.19961
G01 X-63.97082 Y44.34510
G01 X-64.05068 Y44.39846
G01 X-64.25297 Y44.50659
G01 X-64.34172 Y44.54335
G01 X-64.56120 Y44.60994
G01 X-64.65541 Y44.62866
G01 X-64.88365 Y44.65114
G01 X-64.97971 Y44.65114
G01 X-65.20798 Y44.62866
G01 X-65.25612 Y44.61911
G01 X-65.29815 Y44.59669
G01 X-65.50095 Y44.47512
G01 X-65.56925 Y44.42955
G01 X-65.75545 Y44.29143
G01 X-65.81105 Y44.24584
G01 X-65.98121 Y44.09161
G01 X-66.02977 Y44.04304
G01 X-66.18398 Y43.87289
G01 X-66.22957 Y43.81731
G01 X-66.36770 Y43.63110
G01 X-66.41329 Y43.56280
G01 X-66.53485 Y43.35996
G01 X-66.55726 Y43.31797
G01 X-66.56686 Y43.26979
G01 X-66.58934 Y43.04154
G01 X-66.58934 Y42.94548
G01 X-66.56686 Y42.71724
G01 X-66.54811 Y42.62303
G01 X-66.54044 Y42.59776
G01 X-66.54044 Y42.59773
G01 X-66.50359 Y42.53230
G01 X-66.47209 Y42.46883
G01 X-66.44707 Y42.41401
G01 X-66.42007 Y42.34934
G01 X-66.41926 Y42.34741
G01 X-66.41159 Y42.33248
G01 X-66.31631 Y42.15150
G01 X-66.30326 Y42.13035
G01 X-66.25317 Y42.05740
G01 X-66.18781 Y41.97160
G01 X-66.10768 Y41.88008
G01 X-66.04611 Y41.81638
G01 X-66.03808 Y41.80886
G01 X-65.86673 Y41.66885
G01 X-65.79437 Y41.62285
G01 X-65.67669 Y41.55567
G01 X-65.67402 Y41.55440
G01 X-65.59208 Y41.51478
G01 X-65.51057 Y41.48021
G01 X-65.47425 Y41.46685
G01 X-65.29114 Y41.41343
G01 X-65.26170 Y41.40540
G01 X-65.20417 Y41.39672
G01 X-65.04215 Y41.37762
G01 X-64.97590 Y41.37437
G01 X-64.88743 Y41.37437
G01 X-64.82122 Y41.37762
G01 X-64.81802 Y41.37800
G01 X-64.65916 Y41.39672
G01 X-64.60166 Y41.40540
G01 X-64.57222 Y41.41343
G01 X-64.38909 Y41.46687
G01 X-64.35279 Y41.48018
G01 X-64.27131 Y41.51478
G01 X-64.18665 Y41.55570
G01 X-64.06900 Y41.62285
G01 X-63.99663 Y41.66883
G01 X-63.99437 Y41.67068
G01 X-63.88264 Y41.76197
G01 X-63.82536 Y41.80878
G01 X-63.81723 Y41.81640
G01 X-63.75571 Y41.88005
G01 X-63.68952 Y41.95564
G01 X-63.59745 Y42.04688
G01 X-63.59640 Y42.04780
G01 X-63.54436 Y42.09606
G01 X-63.52744 Y42.11295
G01 X-63.52564 Y42.11455
G01 X-63.46074 Y42.23598
G01 X-62.97718 Y42.23598
G01 X-62.97718 Y42.22598
G01 X-62.96778 Y42.13037
G01 X-62.95289 Y42.08132
G01 X-62.95135 Y42.07924
G01 X-62.90588 Y42.02214
G01 X-62.82031 Y41.92252
G01 X-62.80641 Y41.90672
G01 X-62.73103 Y41.84587
G01 X-62.64677 Y41.79479
G01 X-62.58881 Y41.76232
G01 X-62.54939 Y41.74203
G01 X-62.51784 Y41.70774
G01 X-62.48266 Y41.65163
G01 X-62.47718 Y41.62864
G01 X-62.45678 Y41.54277
G01 X-62.44675 Y41.47292
G01 X-62.43743 Y41.34340
G01 X-62.43743 Y40.26375
G01 X-62.43870 Y40.21569
G01 X-62.44012 Y40.18923
G01 X-62.46133 Y40.03584
G01 X-62.47837 Y40.01234
G01 X-62.52069 Y39.95580
G01 X-62.60563 Y39.85771
G01 X-62.99201 Y39.47132
G01 X-63.02249 Y39.43932
G01 X-63.03506 Y39.42545
G01 X-63.06559 Y39.38593
G01 X-63.10933 Y39.32410
G01 X-63.11538 Y39.31272
G01 X-63.13019 Y39.28435
G01 X-63.14713 Y39.25192
G01 X-63.16664 Y39.21216
G01 X-63.18094 Y39.17025
G01 X-63.20151 Y39.10480
G01 X-63.20529 Y39.09243
G01 X-63.21805 Y39.01796
G01 X-63.22442 Y38.96827
G01 X-63.22533 Y38.94971
G01 X-63.22640 Y38.90543
G01 X-63.22640 Y33.19018
G01 X-63.23102 Y33.09905
G01 X-63.23605 Y33.04934
G01 X-63.26615 Y32.91845
G01 X-63.27415 Y32.88375
G01 X-63.30844 Y32.82991
G01 X-63.35287 Y32.77598
G01 X-63.41865 Y32.71007
G01 X-63.49569 Y32.65777
G01 X-63.58124 Y32.62102
G01 X-63.64776 Y32.59966
G01 X-63.73887 Y32.57972
G01 X-63.83206 Y32.57741
G01 X-63.87184 Y32.58406
G01 X-63.88218 Y32.58835
G01 X-63.92091 Y32.60451
G01 X-63.98452 Y32.63715
G01 X-63.98868 Y32.63928
G01 X-64.06867 Y32.68083
G01 X-64.09998 Y32.69790
G01 X-64.18665 Y32.74736
G01 X-64.27131 Y32.78828
G01 X-64.35279 Y32.82287
G01 X-64.38909 Y32.83621
G01 X-64.57222 Y32.88962
G01 X-64.60163 Y32.89765
G01 X-64.65916 Y32.90634
G01 X-64.82114 Y32.92544
G01 X-64.88743 Y32.92869
G01 X-64.97590 Y32.92869
G01 X-65.04217 Y32.92544
G01 X-65.13737 Y32.91421
G01 X-65.20443 Y32.90882
G01 X-65.21667 Y32.90829
G01 X-65.26008 Y32.90537
G01 X-65.29498 Y32.90222
G01 X-65.38710 Y32.89826
G01 X-65.46737 Y32.95228
G01 X-65.52391 Y32.99460
G01 X-65.62200 Y33.07954
G01 X-66.86785 Y34.32541
G01 X-66.89985 Y34.35589
G01 X-66.91367 Y34.36841
G01 X-66.95794 Y34.40257
G01 X-67.01507 Y34.44271
G01 X-67.02645 Y34.44878
G01 X-67.08728 Y34.48050
G01 X-67.12700 Y34.50001
G01 X-67.16891 Y34.51433
G01 X-67.23437 Y34.53488
G01 X-67.24666 Y34.53864
G01 X-67.32121 Y34.55142
G01 X-67.37087 Y34.55779
G01 X-67.38946 Y34.55871
G01 X-67.43373 Y34.55977
G01 X-73.18048 Y34.55977
G01 X-73.26735 Y34.56396
G01 X-73.31477 Y34.56856
G01 X-73.47838 Y34.59904
G01 X-73.48526 Y34.60676
G01 X-73.52176 Y34.64766
G01 X-73.54805 Y34.67915
G01 X-73.56781 Y34.70206
G01 X-73.60814 Y34.74735
G01 X-73.65224 Y34.80090
G01 X-73.67553 Y34.83143
G01 X-73.75569 Y34.92299
G01 X-73.81726 Y34.98670
G01 X-73.82526 Y34.99419
G01 X-73.99661 Y35.13419
G01 X-74.06898 Y35.18019
G01 X-74.18665 Y35.24735
G01 X-74.27126 Y35.28827
G01 X-74.35280 Y35.32287
G01 X-74.38909 Y35.33620
G01 X-74.57223 Y35.38962
G01 X-74.60164 Y35.39764
G01 X-74.65917 Y35.40633
G01 X-74.82115 Y35.42543
G01 X-74.88744 Y35.42868
G01 X-74.97591 Y35.42868
G01 X-75.04223 Y35.42543
G01 X-75.15198 Y35.41248
G01 X-75.20418 Y35.40633
G01 X-75.26168 Y35.39767
G01 X-75.29112 Y35.38962
G01 X-75.47426 Y35.33620
G01 X-75.51055 Y35.32287
G01 X-75.59209 Y35.28827
G01 X-75.67669 Y35.24735
G01 X-75.72572 Y35.21939
G01 X-75.79600 Y35.18324
G01 X-75.80738 Y35.17798
G01 X-75.85226 Y35.15584
G01 X-75.87733 Y35.14260
G01 X-75.95002 Y35.11393
G01 X-75.97824 Y35.10283
G01 X-76.07766 Y35.10491
G01 X-76.14682 Y35.11484
G01 X-76.23737 Y35.13679
G01 X-76.32213 Y35.17547
G01 X-76.39803 Y35.22950
G01 X-76.45084 Y35.27524
G01 X-76.51515 Y35.34268
G01 X-76.56552 Y35.42109
G01 X-76.60016 Y35.50760
G01 X-76.61985 Y35.57466
G01 X-76.63968 Y35.71265
G01 X-76.63968 Y35.73094
G01 X-76.66381 Y35.91420
G01 X-76.71164 Y36.09274
G01 X-76.78238 Y36.26350
G01 X-76.87479 Y36.42355
G01 X-76.98731 Y36.57021
G01 X-77.10966 Y36.69256
G01 X-77.10966 Y36.51949
G01 X-77.10522 Y36.51504
G01 X-77.00572 Y36.39383
G01 X-76.95236 Y36.31395
G01 X-76.87844 Y36.17565
G01 X-76.84169 Y36.08690
G01 X-76.79615 Y35.93683
G01 X-76.77743 Y35.84260
G01 X-76.76204 Y35.68654
G01 X-76.75967 Y35.63851
G01 X-76.75967 Y34.83851
G01 X-76.76204 Y34.79048
G01 X-76.77743 Y34.63442
G01 X-76.79615 Y34.54019
G01 X-76.84169 Y34.39013
G01 X-76.87844 Y34.30138
G01 X-76.95236 Y34.16308
G01 X-77.00572 Y34.08319
G01 X-77.10522 Y33.96198
G01 X-77.17316 Y33.89404
G01 X-77.29437 Y33.79457
G01 X-77.37425 Y33.74121
G01 X-77.51256 Y33.66727
G01 X-77.60130 Y33.63051
G01 X-77.75137 Y33.58497
G01 X-77.84558 Y33.56625
G01 X-78.00166 Y33.55086
G01 X-78.09772 Y33.55086
G01 X-78.25378 Y33.56625
G01 X-78.34799 Y33.58497
G01 X-78.49808 Y33.63051
G01 X-78.58682 Y33.66727
G01 X-78.72513 Y33.74121
G01 X-78.80498 Y33.79457
G01 X-78.92622 Y33.89404
G01 X-78.99414 Y33.96198
G01 X-79.07468 Y34.06011
G01 X-79.09363 Y34.08319
G01 X-79.14699 Y34.16308
G01 X-79.22093 Y34.30138
G01 X-79.25769 Y34.39013
G01 X-79.30320 Y34.54019
G01 X-79.31969 Y34.62297
G01 X-79.31969 Y35.85398
G01 X-79.33615 Y35.93683
G01 X-79.38169 Y36.08690
G01 X-79.41844 Y36.17565
G01 X-79.49236 Y36.31395
G01 X-79.54572 Y36.39383
G01 X-79.64522 Y36.51504
G01 X-79.71316 Y36.58299
G01 X-79.74969 Y36.61296
G01 X-79.74969 Y36.94986
G01 X-79.76460 Y36.98809
G01 X-79.76536 Y36.99154
G01 X-79.77681 Y37.03714
G01 X-79.78233 Y37.05703
G01 X-79.79414 Y37.10440
G01 X-79.81052 Y37.17841
G01 X-79.81433 Y37.19088
G01 X-79.81707 Y37.19960
G01 X-79.83488 Y37.25634
G01 X-79.84918 Y37.29822
G01 X-79.86871 Y37.33797
G01 X-79.90046 Y37.39881
G01 X-79.90648 Y37.41019
G01 X-79.95024 Y37.47201
G01 X-79.98072 Y37.51148
G01 X-79.99335 Y37.52538
G01 X-80.02383 Y37.55741
G01 X-80.52830 Y38.06188
G01 X-80.58283 Y38.12151
G01 X-80.61115 Y38.15545
G01 X-80.70663 Y38.29604
G01 X-80.70742 Y38.29721
G01 X-81.27778 Y38.86759
G01 X-81.42593 Y38.93767
G01 X-81.50216 Y38.97833
G01 X-81.64082 Y39.06144
G01 X-81.70117 Y39.10173
G01 X-81.82852 Y39.19616
G01 X-81.87882 Y39.23741
G01 X-81.99512 Y39.34285
G01 X-82.03932 Y39.38702
G01 X-82.10363 Y39.45801
G01 X-82.12553 Y39.51917
G01 X-82.14298 Y39.57653
G01 X-82.18227 Y39.73337
G01 X-82.19164 Y39.78049
G01 X-82.21491 Y39.93731
G01 X-82.21897 Y39.97851
G01 X-82.22669 Y40.13533
G01 X-82.22669 Y40.17462
G01 X-82.21897 Y40.33147
G01 X-82.21491 Y40.37267
G01 X-82.19164 Y40.52949
G01 X-82.18227 Y40.57660
G01 X-82.14298 Y40.73345
G01 X-82.12553 Y40.79080
G01 X-82.06939 Y40.94765
G01 X-82.06672 Y40.95499
G01 X-82.04143 Y41.02352
G01 X-81.99827 Y41.18597
G01 X-81.99809 Y41.18666
G01 X-82.01976 Y41.22720
G01 X-82.08069 Y41.30147
G01 X-82.15496 Y41.36240
G01 X-82.23967 Y41.40766
G01 X-82.33160 Y41.43555
G01 X-82.38720 Y41.44104
G01 X-82.38720 Y41.81467
G01 X-82.40757 Y41.88257
G01 X-82.41763 Y41.95244
G01 X-82.42664 Y42.05999
G01 X-82.42720 Y42.08188
G01 X-82.42801 Y42.10423
G01 X-82.42893 Y42.12283
G01 X-82.43530 Y42.17248
G01 X-82.44805 Y42.24698
G01 X-82.45184 Y42.25933
G01 X-82.47239 Y42.32478
G01 X-82.47681 Y42.33845
G01 X-82.48669 Y42.36669
G01 X-82.50620 Y42.40642
G01 X-82.53795 Y42.46725
G01 X-82.54399 Y42.47863
G01 X-82.57135 Y42.51856
G01 X-82.57912 Y42.52930
G01 X-82.58331 Y42.53502
G01 X-82.58748 Y42.54066
G01 X-82.62624 Y42.59763
G01 X-82.65062 Y42.63654
G01 X-82.66111 Y42.65366
G01 X-82.67160 Y42.72669
G01 X-82.68092 Y42.85618
G01 X-82.68092 Y43.03926
G01 X-82.67384 Y43.15231
G01 X-82.66611 Y43.21366
G01 X-82.64120 Y43.30604
G01 X-82.64120 Y43.52775
G01 X-82.59888 Y43.55602
G01 X-82.47765 Y43.65551
G01 X-82.40973 Y43.72343
G01 X-82.31023 Y43.84467
G01 X-82.25687 Y43.92453
G01 X-82.18293 Y44.06285
G01 X-82.14618 Y44.15158
G01 X-82.10066 Y44.30166
G01 X-82.08417 Y44.38439
G01 X-82.08417 Y44.81540
G01 X-82.06772 Y44.89828
G01 X-82.02220 Y45.04837
G01 X-81.98544 Y45.13710
G01 X-81.91151 Y45.27542
G01 X-81.85814 Y45.35528
G01 X-81.75865 Y45.47652
G01 X-81.75418 Y45.48099
G01 X-81.75418 Y45.65404
G01 X-81.79868 Y45.60951
G01 X-81.84290 Y45.57034
G01 X-81.86639 Y45.55193
G01 X-81.95044 Y45.49887
G01 X-81.95613 Y45.49673
G01 X-82.04346 Y45.46387
G01 X-82.11102 Y45.44601
G01 X-82.20292 Y45.43087
G01 X-82.29601 Y45.43339
G01 X-82.38694 Y45.45348
G01 X-82.39217 Y45.45518
G01 X-82.41597 Y45.47139
G01 X-82.44785 Y45.49224
G01 X-82.49583 Y45.52229
G01 X-82.55885 Y45.56549
G01 X-82.62352 Y45.61393
G01 X-82.69687 Y45.66343
G01 X-82.72895 Y45.68287
G01 X-82.83540 Y45.73692
G01 X-82.89685 Y45.76526
G01 X-82.91684 Y45.77164
G01 X-83.06682 Y45.81751
G01 X-83.07566 Y45.82018
G01 X-83.15384 Y45.83341
G01 X-83.26073 Y45.84672
G01 X-83.30990 Y45.84916
G01 X-83.39850 Y45.84916
G01 X-83.44762 Y45.84672
G01 X-83.54516 Y45.83458
G01 X-83.55450 Y45.83341
G01 X-83.63269 Y45.82018
G01 X-83.64152 Y45.81751
G01 X-83.79151 Y45.77164
G01 X-83.81150 Y45.76526
G01 X-83.87294 Y45.73692
G01 X-83.97937 Y45.68289
G01 X-84.01148 Y45.66343
G01 X-84.08483 Y45.61393
G01 X-84.13362 Y45.57738
G01 X-84.16299 Y45.55175
G01 X-84.19372 Y45.52612
G01 X-84.20698 Y45.51553
G01 X-84.21081 Y45.51246
G01 X-84.27719 Y45.45891
G01 X-84.32164 Y45.42516
G01 X-84.35590 Y45.41959
G01 X-84.42578 Y45.40954
G01 X-84.55524 Y45.40024
G01 X-84.87820 Y45.40024
G01 X-84.92247 Y45.39915
G01 X-84.94104 Y45.39823
G01 X-84.94343 Y45.39795
G01 X-84.94518 Y45.39773
G01 X-84.99082 Y45.39336
G01 X-85.07581 Y45.38736
G01 X-85.08104 Y45.38698
G01 X-85.14716 Y45.38195
G01 X-85.15112 Y45.38165
G01 X-85.18597 Y45.37913
G01 X-85.23941 Y45.39209
G01 X-85.32420 Y45.43080
G01 X-85.40012 Y45.48487
G01 X-85.45293 Y45.53064
G01 X-85.51719 Y45.59805
G01 X-85.54381 Y45.63951
G01 X-85.58257 Y45.76859
G01 X-85.59260 Y45.83844
G01 X-85.60192 Y45.96796
G01 X-85.60192 Y52.21999
G01 X-85.60301 Y52.26423
G01 X-85.60393 Y52.28283
G01 X-85.61030 Y52.33248
G01 X-85.62305 Y52.40701
G01 X-85.62684 Y52.41933
G01 X-85.64739 Y52.48478
G01 X-85.66174 Y52.52677
G01 X-85.68120 Y52.56642
G01 X-85.71295 Y52.62725
G01 X-85.71899 Y52.63863
G01 X-85.76273 Y52.70045
G01 X-85.78932 Y52.73485
G01 X-85.79334 Y52.74005
G01 X-85.80583 Y52.75384
G01 X-85.83631 Y52.78585
G01 X-87.10631 Y54.05585
G01 X-87.13832 Y54.08633
G01 X-87.15216 Y54.09888
G01 X-87.19171 Y54.12943
G01 X-87.22049 Y54.15077
G01 X-87.26275 Y54.18082
G01 X-87.26369 Y54.18148
G01 X-87.28602 Y54.19730
G01 X-87.31965 Y54.22232
G01 X-87.39181 Y54.27853
G01 X-87.39181 Y54.27856
G01 X-87.42226 Y54.33068
G01 X-87.45130 Y54.39423
G01 X-87.48175 Y54.48226
G01 X-87.49504 Y54.57444
G01 X-87.49062 Y54.66748
G01 X-87.48068 Y54.73664
G01 X-87.45871 Y54.82727
G01 X-87.41995 Y54.91208
G01 X-87.36585 Y54.98803
G01 X-87.32008 Y55.04081
G01 X-87.25269 Y55.10502
G01 X-87.21124 Y55.13167
G01 X-87.08221 Y55.17038
G01 X-87.01236 Y55.18043
G01 X-86.88287 Y55.18973
G01 X-86.16954 Y55.18973
G01 X-86.12150 Y55.18846
G01 X-86.09499 Y55.18704
G01 X-85.94155 Y55.16583
G01 X-85.91810 Y55.14884
G01 X-85.86161 Y55.10654
G01 X-85.76347 Y55.02156
G01 X-79.02812 Y48.28621
G01 X-78.99487 Y48.25114
G01 X-78.97712 Y48.23137
G01 X-78.88385 Y48.10813
G01 X-78.87928 Y48.07951
G01 X-78.86925 Y48.00966
G01 X-78.85992 Y47.88014
G01 X-78.85992 Y46.08233
G01 X-78.86005 Y46.06681
G01 X-78.86020 Y46.05797
G01 X-78.87476 Y45.91086
G01 X-78.88738 Y45.84098
G01 X-78.89968 Y45.79798
G01 X-78.90686 Y45.77291
G01 X-78.91654 Y45.75297
G01 X-78.97234 Y45.67845
G01 X-79.04120 Y45.61583
G01 X-79.09713 Y45.57395
G01 X-79.17671 Y45.52544
G01 X-79.26401 Y45.49287
G01 X-79.35594 Y45.47740
G01 X-79.42561 Y45.47243
G01 X-79.51867 Y45.47466
G01 X-79.60966 Y45.49442
G01 X-79.69525 Y45.53108
G01 X-79.75659 Y45.56455
G01 X-79.86843 Y45.64827
G01 X-79.87417 Y45.65401
G01 X-79.87417 Y45.48096
G01 X-79.86973 Y45.47652
G01 X-79.77023 Y45.35528
G01 X-79.71687 Y45.27542
G01 X-79.64293 Y45.13710
G01 X-79.60618 Y45.04837
G01 X-79.56066 Y44.89828
G01 X-79.54191 Y44.80408
G01 X-79.52655 Y44.64799
G01 X-79.52655 Y44.55196
G01 X-79.54191 Y44.39587
G01 X-79.56066 Y44.30166
G01 X-79.60618 Y44.15158
G01 X-79.64293 Y44.06285
G01 X-79.71687 Y43.92453
G01 X-79.77023 Y43.84467
G01 X-79.86973 Y43.72343
G01 X-79.87417 Y43.71899
G01 X-79.87417 Y43.48818
G01 X-79.77859 Y43.50395
G01 X-79.70884 Y43.50774
G01 X-79.61580 Y43.50390
G01 X-79.52518 Y43.48257
G01 X-79.44024 Y43.44449
G01 X-79.37948 Y43.40997
G01 X-79.30320 Y43.35645
G01 X-79.23846 Y43.28945
G01 X-79.23755 Y43.28805
G01 X-79.18756 Y43.21142
G01 X-79.15512 Y43.14955
G01 X-79.11989 Y43.06329
G01 X-79.10163 Y42.97192
G01 X-79.10102 Y42.87876
G01 X-79.10199 Y42.86783
G01 X-79.10300 Y42.86529
G01 X-79.12353 Y42.81061
G01 X-79.13584 Y42.77462
G01 X-79.17044 Y42.68782
G01 X-79.17135 Y42.68584
G01 X-79.17217 Y42.68407
G01 X-79.19729 Y42.62966
G01 X-79.23038 Y42.54759
G01 X-79.25421 Y42.47899
G01 X-79.27585 Y42.39750
G01 X-79.29431 Y42.31099
G01 X-79.29660 Y42.29699
G01 X-79.30892 Y42.15483
G01 X-79.31164 Y42.11163
G01 X-79.29937 Y42.06715
G01 X-79.29246 Y42.04439
G01 X-79.27168 Y41.96156
G01 X-79.26206 Y41.91325
G01 X-79.25799 Y41.89402
G01 X-79.24440 Y41.83311
G01 X-79.24034 Y41.81384
G01 X-79.22688 Y41.74622
G01 X-79.21961 Y41.70436
G01 X-79.21570 Y41.67795
G01 X-79.19988 Y41.59705
G01 X-79.19729 Y41.59141
G01 X-79.18636 Y41.56776
G01 X-79.17057 Y41.53931
G01 X-79.15314 Y41.50637
G01 X-79.14387 Y41.48790
G01 X-79.12652 Y41.45140
G01 X-79.08883 Y41.36738
G01 X-79.07267 Y41.32923
G01 X-79.06030 Y41.31953
G01 X-79.00442 Y41.27500
G01 X-78.97938 Y41.25430
G01 X-78.91146 Y41.19621
G01 X-78.90455 Y41.19027
G01 X-78.83912 Y41.13312
G01 X-78.79033 Y41.09659
G01 X-78.71697 Y41.04709
G01 X-78.68489 Y41.02766
G01 X-78.57844 Y40.97360
G01 X-78.51700 Y40.94526
G01 X-78.49708 Y40.93891
G01 X-78.34710 Y40.89301
G01 X-78.33816 Y40.89034
G01 X-78.25993 Y40.87708
G01 X-78.15309 Y40.86377
G01 X-78.10392 Y40.86136
G01 X-78.01545 Y40.86136
G01 X-77.96625 Y40.86377
G01 X-77.85942 Y40.87708
G01 X-77.78119 Y40.89034
G01 X-77.77222 Y40.89304
G01 X-77.62228 Y40.93891
G01 X-77.60234 Y40.94526
G01 X-77.54095 Y40.97358
G01 X-77.42871 Y41.03055
G01 X-77.40143 Y41.04528
G01 X-77.34931 Y41.07226
G01 X-77.32140 Y41.08732
G01 X-77.29229 Y41.10368
G01 X-77.21276 Y41.14175
G01 X-77.18314 Y41.16606
G01 X-77.11522 Y41.23398
G01 X-77.08523 Y41.27053
G01 X-76.44565 Y41.27053
G01 X-76.39762 Y41.27289
G01 X-76.39059 Y41.27358
G01 X-76.33252 Y41.31239
G01 X-76.28441 Y41.34663
G01 X-76.25625 Y41.36796
G01 X-76.21434 Y41.39783
G01 X-76.19709 Y41.40937
G01 X-76.13453 Y41.45570
G01 X-76.08045 Y41.50007
G01 X-76.03128 Y41.54432
G01 X-76.02795 Y41.54759
G01 X-75.98033 Y41.59049
G01 X-75.97680 Y41.59339
G01 X-75.95086 Y41.61577
G01 X-75.80949 Y41.74391
G01 X-75.75424 Y41.78922
G01 X-75.56803 Y41.92732
G01 X-75.50022 Y41.97259
G01 X-75.29740 Y42.09415
G01 X-75.24736 Y42.12085
G01 X-75.20796 Y42.12867
G01 X-74.97972 Y42.15115
G01 X-74.88366 Y42.15115
G01 X-74.65541 Y42.12867
G01 X-74.56120 Y42.10992
G01 X-74.52790 Y42.09984
G01 X-74.39557 Y42.02600
G01 X-74.36895 Y42.01442
G01 X-74.35254 Y42.00749
G01 X-74.32011 Y41.99410
G01 X-74.27129 Y41.97228
G01 X-74.18665 Y41.93136
G01 X-74.06903 Y41.86420
G01 X-73.99661 Y41.81820
G01 X-73.82526 Y41.67820
G01 X-73.81724 Y41.67066
G01 X-73.75572 Y41.60700
G01 X-73.67055 Y41.50975
G01 X-73.60322 Y41.43588
G01 X-73.60296 Y41.43566
G01 X-73.55475 Y41.38453
G01 X-73.53987 Y41.36751
G01 X-73.50835 Y41.33327
G01 X-73.50632 Y41.33103
G01 X-73.35005 Y41.30256
G01 X-73.30263 Y41.29796
G01 X-73.21574 Y41.29377
G01 X-71.13898 Y41.29377
G01 X-71.00950 Y41.30309
G01 X-70.93962 Y41.31315
G01 X-70.91099 Y41.31770
G01 X-70.78775 Y41.41097
G01 X-70.76799 Y41.42872
G01 X-70.73291 Y41.46197
G01 X-65.82012 Y46.37476
G01 X-65.73519 Y46.47286
G01 X-65.69287 Y46.52937
G01 X-65.67583 Y46.55287
G01 X-65.65462 Y46.70628
G01 X-65.65319 Y46.73275
G01 X-65.65192 Y46.78083
G01 X-65.65192 Y48.58101
G01 X-65.66122 Y48.71047
G01 X-65.67128 Y48.78034
G01 X-65.69168 Y48.86328
G01 X-65.69874 Y48.89190
G01 X-65.73671 Y48.95101
G01 X-65.80102 Y49.01844
G01 X-65.85383 Y49.06419
G01 X-65.90920 Y49.10460
G01 X-65.95515 Y49.11552
G01 X-66.07669 Y49.14440
G01 X-66.12939 Y49.15007
G01 X-66.22619 Y49.15527
G01 X-66.35771 Y49.15527
G01 X-66.40199 Y49.15637
G01 X-66.42055 Y49.15728
G01 X-66.47021 Y49.16366
G01 X-66.54476 Y49.17641
G01 X-66.55703 Y49.18017
G01 X-66.62248 Y49.20074
G01 X-66.66442 Y49.21504
G01 X-66.70414 Y49.23455
G01 X-66.76495 Y49.26630
G01 X-66.77636 Y49.27234
G01 X-66.83815 Y49.31608
G01 X-66.87773 Y49.34666
G01 X-66.89155 Y49.35919
G01 X-66.92355 Y49.38967
G01 X-67.99751 Y50.46363
G01 X-68.02799 Y50.49563
G01 X-68.04054 Y50.50948
G01 X-68.07110 Y50.54902
G01 X-68.11478 Y50.61075
G01 X-68.12088 Y50.62223
G01 X-68.15263 Y50.68303
G01 X-68.17214 Y50.72278
G01 X-68.18644 Y50.76469
G01 X-68.20701 Y50.83015
G01 X-68.21077 Y50.84244
G01 X-68.22352 Y50.91697
G01 X-68.22992 Y50.96668
G01 X-68.23084 Y50.98519
G01 X-68.23193 Y51.02946
G01 X-68.23193 Y52.05481
G01 X-68.24123 Y52.18433
G01 X-68.25128 Y52.25418
G01 X-68.25710 Y52.28994
G01 X-68.29086 Y52.33424
G01 X-68.33282 Y52.38610
G01 X-68.34072 Y52.39601
G01 X-68.34742 Y52.40454
G01 X-68.35530 Y52.41440
G01 X-68.44600 Y52.52651
G01 X-68.46607 Y52.55227
G01 X-68.49477 Y52.60033
G01 X-68.55845 Y52.71488
G01 X-68.56927 Y52.73833
G01 X-68.60239 Y52.82047
G01 X-68.62621 Y52.88907
G01 X-68.64785 Y52.97058
G01 X-68.66632 Y53.05715
G01 X-68.66861 Y53.07109
G01 X-68.68092 Y53.21328
G01 X-68.68357 Y53.25476
G01 X-68.68367 Y53.25755
G01 X-68.68092 Y53.30175
G01 X-68.66861 Y53.44396
G01 X-68.66632 Y53.45791
G01 X-68.64785 Y53.54450
G01 X-68.62621 Y53.62598
G01 X-68.60239 Y53.69458
G01 X-68.56929 Y53.77668
G01 X-68.55845 Y53.80015
G01 X-68.49479 Y53.91470
G01 X-68.46609 Y53.96278
G01 X-68.44600 Y53.98854
G01 X-68.34778 Y54.10995
G01 X-68.34735 Y54.11046
G01 X-68.29065 Y54.18064
G01 X-68.26487 Y54.21404
G01 X-68.22210 Y54.27205
G01 X-68.22126 Y54.27325
G01 X-68.22124 Y54.27325
G01 X-68.22111 Y54.27348
G01 X-68.18700 Y54.30147
G01 X-68.10714 Y54.35483
G01 X-67.96881 Y54.42875
G01 X-67.88006 Y54.46553
G01 X-67.73000 Y54.51104
G01 X-67.70874 Y54.51528
G01 X-67.63579 Y54.52979
G01 X-67.47971 Y54.54515
G01 X-67.38367 Y54.54515
G01 X-67.22759 Y54.52979
G01 X-67.13338 Y54.51104
G01 X-66.98329 Y54.46553
G01 X-66.89454 Y54.42875
G01 X-66.75624 Y54.35483
G01 X-66.67638 Y54.30147
G01 X-66.55515 Y54.20197
G01 X-66.48723 Y54.13406
G01 X-66.38774 Y54.01282
G01 X-66.33437 Y53.93296
G01 X-66.26043 Y53.79463
G01 X-66.22368 Y53.70589
G01 X-66.17816 Y53.55582
G01 X-66.15942 Y53.46162
G01 X-66.14405 Y53.30553
G01 X-66.14405 Y53.20950
G01 X-66.15942 Y53.05341
G01 X-66.17816 Y52.95920
G01 X-66.22368 Y52.80911
G01 X-66.26043 Y52.72039
G01 X-66.33437 Y52.58206
G01 X-66.38774 Y52.50221
G01 X-66.48723 Y52.38097
G01 X-66.55515 Y52.31305
G01 X-66.59167 Y52.28308
G01 X-66.59167 Y51.37742
G01 X-66.00976 Y50.79550
G01 X-65.82614 Y50.79550
G01 X-65.79615 Y50.83206
G01 X-65.72823 Y50.89997
G01 X-65.60699 Y50.99947
G01 X-65.52713 Y51.05283
G01 X-65.38881 Y51.12675
G01 X-65.30008 Y51.16353
G01 X-65.14999 Y51.20904
G01 X-65.05579 Y51.22779
G01 X-64.89970 Y51.24315
G01 X-64.80367 Y51.24315
G01 X-64.64758 Y51.22779
G01 X-64.55337 Y51.20904
G01 X-64.40331 Y51.16353
G01 X-64.31456 Y51.12675
G01 X-64.17623 Y51.05283
G01 X-64.09638 Y50.99947
G01 X-63.97514 Y50.89997
G01 X-63.90722 Y50.83206
G01 X-63.80773 Y50.71082
G01 X-63.75437 Y50.63096
G01 X-63.68045 Y50.49263
G01 X-63.64367 Y50.40389
G01 X-63.59816 Y50.25382
G01 X-63.57941 Y50.15962
G01 X-63.56404 Y50.00353
G01 X-63.56404 Y49.90750
G01 X-63.57941 Y49.75141
G01 X-63.59816 Y49.65720
G01 X-63.64367 Y49.50711
G01 X-63.68045 Y49.41839
G01 X-63.75437 Y49.28006
G01 X-63.80773 Y49.20021
G01 X-63.90722 Y49.07897
G01 X-63.97514 Y49.01105
G01 X-64.01169 Y48.98106
G01 X-64.01169 Y46.21147
G01 X-64.01406 Y46.16346
G01 X-64.02076 Y46.09516
G01 X-64.03951 Y46.00095
G01 X-64.05942 Y45.93529
G01 X-64.09617 Y45.84654
G01 X-64.12853 Y45.78604
G01 X-64.18190 Y45.70618
G01 X-64.22541 Y45.65315
G01 X-64.25772 Y45.61751
G01 X-65.25612 Y44.61911
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.55726 Y43.31797 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.55726 Y43.31797
G01 X-67.13787 Y42.73735
G01 X-67.29114 Y42.63273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.54044 Y42.59776 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.54044 Y42.59776
G01 X-66.54179 Y42.60014
G01 X-66.55202 Y42.61175
G01 X-66.62573 Y42.66875
G01 X-66.70892 Y42.71076
G01 X-66.77399 Y42.73619
G01 X-66.86358 Y42.76169
G01 X-66.95639 Y42.76976
G01 X-67.04903 Y42.76014
G01 X-67.11753 Y42.74635
G01 X-67.13092 Y42.74210
G01 X-67.29114 Y42.63273
G01 X-67.31941 Y42.60842
G01 X-67.36914 Y42.56230
G01 X-70.00376 Y39.92768
G01 X-70.03576 Y39.89720
G01 X-70.04960 Y39.88466
G01 X-70.08915 Y39.85410
G01 X-70.15098 Y39.81036
G01 X-70.16235 Y39.80432
G01 X-70.19469 Y39.78745
G01 X-70.22319 Y39.77256
G01 X-70.26291 Y39.75306
G01 X-70.29611 Y39.74155
G01 X-70.30482 Y39.73876
G01 X-70.37028 Y39.71821
G01 X-70.38262 Y39.71442
G01 X-70.45712 Y39.70167
G01 X-70.50683 Y39.69527
G01 X-70.52537 Y39.69436
G01 X-70.56962 Y39.69327
G01 X-73.21574 Y39.69327
G01 X-73.34520 Y39.68397
G01 X-73.41508 Y39.67394
G01 X-73.50642 Y39.65626
G01 X-73.54119 Y39.62024
G01 X-73.60075 Y39.55532
G01 X-73.60372 Y39.55209
G01 X-73.63301 Y39.52047
G01 X-73.67070 Y39.47711
G01 X-73.75569 Y39.38006
G01 X-73.81726 Y39.31636
G01 X-73.82526 Y39.30886
G01 X-73.99661 Y39.16886
G01 X-74.06898 Y39.12286
G01 X-74.18668 Y39.05568
G01 X-74.27126 Y39.01478
G01 X-74.34368 Y38.98359
G01 X-74.35280 Y38.98019
G01 X-74.38907 Y38.96688
G01 X-74.57223 Y38.91344
G01 X-74.60164 Y38.90541
G01 X-74.65917 Y38.89672
G01 X-74.81802 Y38.87800
G01 X-74.82122 Y38.87762
G01 X-74.88744 Y38.87437
G01 X-74.97591 Y38.87437
G01 X-75.04215 Y38.87762
G01 X-75.20418 Y38.89672
G01 X-75.26171 Y38.90541
G01 X-75.29112 Y38.91344
G01 X-75.47426 Y38.96685
G01 X-75.51055 Y38.98019
G01 X-75.59209 Y39.01478
G01 X-75.67116 Y39.05301
G01 X-75.67677 Y39.05573
G01 X-75.70105 Y39.06959
G01 X-75.79437 Y39.12286
G01 X-75.86671 Y39.16883
G01 X-76.03809 Y39.30886
G01 X-76.04609 Y39.31636
G01 X-76.10766 Y39.38006
G01 X-76.18779 Y39.47157
G01 X-76.25315 Y39.55740
G01 X-76.30326 Y39.63035
G01 X-76.31632 Y39.65151
G01 X-76.41159 Y39.83251
G01 X-76.41924 Y39.84739
G01 X-76.44446 Y39.91481
G01 X-76.49112 Y40.05659
G01 X-76.51093 Y40.13431
G01 X-76.52859 Y40.22100
G01 X-76.53651 Y40.27294
G01 X-76.55122 Y40.44927
G01 X-76.55381 Y40.49354
G01 X-76.55365 Y40.49807
G01 X-76.55208 Y40.53789
G01 X-76.55305 Y40.62854
G01 X-76.55726 Y40.69918
G01 X-76.56402 Y40.76951
G01 X-76.56516 Y40.77820
G01 X-76.54812 Y40.86400
G01 X-76.48152 Y41.08348
G01 X-76.44477 Y41.17223
G01 X-76.39059 Y41.27358
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.29229 Y41.10368 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.29229 Y41.10368
G01 X-77.20453 Y41.14569
G01 X-77.12355 Y41.15077
G01 X-77.03493 Y41.14010
G01 X-76.96661 Y41.12547
G01 X-76.87776 Y41.09738
G01 X-76.79584 Y41.05300
G01 X-76.72381 Y40.99390
G01 X-76.67425 Y40.94465
G01 X-76.61472 Y40.87299
G01 X-76.56981 Y40.79136
G01 X-76.56491 Y40.77614
G01 X-76.56402 Y40.76951
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.24736 Y42.12085 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.24736 Y42.12085
G01 X-74.65823 Y42.70995
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.35005 Y41.30256 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.35005 Y41.30256
G01 X-73.50405 Y41.33063
G01 X-73.50835 Y41.33327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.52790 Y42.09984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.52790 Y42.09984
G01 X-74.53596 Y42.10434
G01 X-74.55788 Y42.12819
G01 X-74.59973 Y42.18412
G01 X-74.64822 Y42.26367
G01 X-74.68076 Y42.35094
G01 X-74.69620 Y42.44282
G01 X-74.70118 Y42.51251
G01 X-74.69895 Y42.60563
G01 X-74.68848 Y42.65379
G01 X-74.65823 Y42.70995
G01 X-74.62460 Y42.77246
G01 X-74.58231 Y42.82897
G01 X-74.49732 Y42.92712
G01 X-74.36580 Y43.05864
G01 X-74.33532 Y43.09064
G01 X-74.32282 Y43.10444
G01 X-74.29222 Y43.14403
G01 X-74.24845 Y43.20591
G01 X-74.24243 Y43.21724
G01 X-74.21071 Y43.27807
G01 X-74.19120 Y43.31777
G01 X-74.17688 Y43.35971
G01 X-74.15633 Y43.42516
G01 X-74.15257 Y43.43743
G01 X-74.13979 Y43.51198
G01 X-74.13342 Y43.56164
G01 X-74.13250 Y43.58020
G01 X-74.13143 Y43.62447
G01 X-74.13143 Y43.78274
G01 X-74.12859 Y43.85427
G01 X-74.12547 Y43.89338
G01 X-74.09466 Y44.06847
G01 X-74.06905 Y44.09219
G01 X-74.05795 Y44.10212
G01 X-74.01688 Y44.14109
G01 X-73.99125 Y44.16689
G01 X-73.92130 Y44.23039
G01 X-73.82524 Y44.30888
G01 X-73.81724 Y44.31640
G01 X-73.75572 Y44.38005
G01 X-73.67556 Y44.47156
G01 X-73.61020 Y44.55737
G01 X-73.56009 Y44.63034
G01 X-73.54703 Y44.65150
G01 X-73.45176 Y44.83252
G01 X-73.44411 Y44.84738
G01 X-73.41889 Y44.91482
G01 X-73.37223 Y45.05658
G01 X-73.35242 Y45.13433
G01 X-73.33476 Y45.22102
G01 X-73.32684 Y45.27296
G01 X-73.31213 Y45.44924
G01 X-73.30954 Y45.49353
G01 X-73.31213 Y45.53778
G01 X-73.32684 Y45.71411
G01 X-73.33476 Y45.76605
G01 X-73.35242 Y45.85274
G01 X-73.37223 Y45.93046
G01 X-73.41889 Y46.07225
G01 X-73.44411 Y46.13966
G01 X-73.45176 Y46.15454
G01 X-73.54703 Y46.33554
G01 X-73.56009 Y46.35670
G01 X-73.61020 Y46.42965
G01 X-73.67556 Y46.51548
G01 X-73.75569 Y46.60699
G01 X-73.81726 Y46.67070
G01 X-73.82526 Y46.67819
G01 X-73.99661 Y46.81819
G01 X-74.06898 Y46.86419
G01 X-74.18665 Y46.93135
G01 X-74.27126 Y46.97227
G01 X-74.35280 Y47.00687
G01 X-74.38909 Y47.02020
G01 X-74.57223 Y47.07362
G01 X-74.60164 Y47.08164
G01 X-74.65917 Y47.09033
G01 X-74.82115 Y47.10943
G01 X-74.88744 Y47.11268
G01 X-74.97591 Y47.11268
G01 X-75.04223 Y47.10943
G01 X-75.09341 Y47.10339
G01 X-75.20418 Y47.09033
G01 X-75.26171 Y47.08164
G01 X-75.29112 Y47.07362
G01 X-75.47426 Y47.02020
G01 X-75.51055 Y47.00687
G01 X-75.59209 Y46.97227
G01 X-75.67669 Y46.93135
G01 X-75.79437 Y46.86419
G01 X-75.86674 Y46.81819
G01 X-76.03809 Y46.67819
G01 X-76.04609 Y46.67070
G01 X-76.10766 Y46.60699
G01 X-76.18777 Y46.51550
G01 X-76.21347 Y46.48175
G01 X-76.24794 Y46.43925
G01 X-76.25493 Y46.43112
G01 X-76.26735 Y46.41642
G01 X-76.31256 Y46.36168
G01 X-76.38431 Y46.28533
G01 X-76.38546 Y46.28413
G01 X-76.40042 Y46.27535
G01 X-76.46399 Y46.24631
G01 X-76.55205 Y46.21586
G01 X-76.64431 Y46.20260
G01 X-76.73737 Y46.20705
G01 X-76.80651 Y46.21700
G01 X-76.89699 Y46.23897
G01 X-76.98167 Y46.27766
G01 X-77.05751 Y46.33163
G01 X-77.11032 Y46.37738
G01 X-77.17461 Y46.44481
G01 X-77.20130 Y46.48632
G01 X-77.21969 Y46.54756
G01 X-77.24006 Y46.61543
G01 X-77.25010 Y46.68528
G01 X-77.25942 Y46.81477
G01 X-77.25942 Y48.44951
G01 X-77.26051 Y48.49376
G01 X-77.26143 Y48.51227
G01 X-77.26780 Y48.56201
G01 X-77.28058 Y48.63658
G01 X-77.28434 Y48.64885
G01 X-77.30489 Y48.71430
G01 X-77.31919 Y48.75621
G01 X-77.33115 Y48.78113
G01 X-77.33857 Y48.79602
G01 X-77.35297 Y48.82627
G01 X-77.37034 Y48.85682
G01 X-77.37649 Y48.86813
G01 X-77.42023 Y48.92998
G01 X-77.45078 Y48.96950
G01 X-77.46333 Y48.98337
G01 X-77.49381 Y49.01537
G01 X-85.03431 Y56.55587
G01 X-85.06631 Y56.58635
G01 X-85.08016 Y56.59887
G01 X-85.11970 Y56.62945
G01 X-85.18150 Y56.67317
G01 X-85.19291 Y56.67924
G01 X-85.25374 Y56.71096
G01 X-85.29346 Y56.73047
G01 X-85.33537 Y56.74479
G01 X-85.40083 Y56.76534
G01 X-85.41310 Y56.76910
G01 X-85.48767 Y56.78188
G01 X-85.53736 Y56.78825
G01 X-85.55592 Y56.78917
G01 X-85.60017 Y56.79026
G01 X-88.06689 Y56.79026
G01 X-88.15691 Y56.79476
G01 X-88.20606 Y56.79966
G01 X-88.36143 Y56.82999
G01 X-88.38218 Y56.82999
G01 X-88.38863 Y56.84553
G01 X-88.39188 Y56.84977
G01 X-88.39191 Y56.84980
G01 X-88.41617 Y56.88140
G01 X-88.43628 Y56.90672
G01 X-88.46110 Y56.93687
G01 X-88.46798 Y56.94535
G01 X-88.52427 Y57.01541
G01 X-88.54174 Y57.03791
G01 X-88.55554 Y57.05312
G01 X-88.61799 Y57.11558
G01 X-88.63323 Y57.12940
G01 X-88.65604 Y57.14652
G01 X-88.72945 Y57.19618
G01 X-88.73997 Y57.20258
G01 X-88.77299 Y57.21866
G01 X-88.85437 Y57.25345
G01 X-88.85833 Y57.25493
G01 X-88.90161 Y57.26656
G01 X-88.98810 Y57.28533
G01 X-88.98942 Y57.28556
G01 X-89.02582 Y57.28861
G01 X-89.03697 Y57.28914
G01 X-89.08119 Y57.29023
G01 X-90.58119 Y57.29023
G01 X-90.62538 Y57.28914
G01 X-90.63653 Y57.28861
G01 X-90.67425 Y57.28543
G01 X-90.67976 Y57.28495
G01 X-90.76402 Y57.27738
G01 X-90.79493 Y57.27510
G01 X-90.81421 Y57.27398
G01 X-90.85784 Y57.27050
G01 X-90.86836 Y57.26943
G01 X-90.86836 Y57.26941
G01 X-90.90786 Y57.25307
G01 X-90.95106 Y57.22998
G01 X-91.03094 Y57.17662
G01 X-91.06882 Y57.14553
G01 X-91.13673 Y57.07761
G01 X-91.16782 Y57.03971
G01 X-91.18489 Y57.01416
G01 X-91.22119 Y56.95986
G01 X-91.24430 Y56.91663
G01 X-91.25418 Y56.89275
G01 X-91.25418 Y57.59287
G01 X-91.27456 Y57.66074
G01 X-91.28461 Y57.73062
G01 X-91.29394 Y57.86008
G01 X-91.29394 Y61.89447
G01 X-91.28873 Y61.99127
G01 X-91.28306 Y62.04397
G01 X-91.25418 Y62.16414
G01 X-91.25418 Y62.42898
G01 X-90.98863 Y62.42898
G01 X-90.91903 Y62.44938
G01 X-90.84918 Y62.45941
G01 X-90.71969 Y62.46874
G01 X-83.24793 Y62.46874
G01 X-83.19990 Y62.46746
G01 X-83.17338 Y62.46604
G01 X-82.99085 Y62.43787
G01 X-82.95603 Y62.42898
G01 X-82.05557 Y62.42898
G01 X-82.05390 Y62.42980
G01 X-81.96180 Y62.46805
G01 X-81.86378 Y62.50310
G01 X-81.78466 Y62.52718
G01 X-81.68666 Y62.55172
G01 X-81.61603 Y62.56581
G01 X-81.51801 Y62.58034
G01 X-81.45235 Y62.58682
G01 X-81.35433 Y62.59165
G01 X-81.29004 Y62.59165
G01 X-81.19200 Y62.58682
G01 X-81.12634 Y62.58034
G01 X-81.02832 Y62.56581
G01 X-80.95768 Y62.55172
G01 X-80.94920 Y62.54958
G01 X-80.43320 Y62.54958
G01 X-80.39688 Y62.55050
G01 X-80.32825 Y62.55385
G01 X-80.25431 Y62.56117
G01 X-80.18570 Y62.57133
G01 X-80.10752 Y62.58692
G01 X-80.03892 Y62.60412
G01 X-79.95322 Y62.63018
G01 X-79.94158 Y62.63434
G01 X-79.89932 Y62.67265
G01 X-79.86731 Y62.70313
G01 X-79.52960 Y63.04084
G01 X-79.52749 Y63.04293
G01 X-79.42233 Y63.13261
G01 X-79.36521 Y63.17430
G01 X-79.31225 Y63.20198
G01 X-78.69622 Y63.81801
G01 X-78.66391 Y63.85364
G01 X-78.62040 Y63.90668
G01 X-78.59559 Y63.94379
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.45017 Y64.86855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.45017 Y64.86855
G01 X-78.45020 Y65.54432
G01 X-78.45020 Y65.71503
G01 X-78.28223 Y65.88300
G01 X-78.21492 Y65.81572
G01 X-78.09371 Y65.71623
G01 X-78.01382 Y65.66286
G01 X-77.87552 Y65.58892
G01 X-77.78677 Y65.55217
G01 X-77.63671 Y65.50665
G01 X-77.55388 Y65.49017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.32287 Y65.49017 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.32287 Y65.49017
G01 X-76.24007 Y65.47371
G01 X-76.09000 Y65.42819
G01 X-76.00126 Y65.39141
G01 X-75.86295 Y65.31750
G01 X-75.78307 Y65.26413
G01 X-75.66186 Y65.16464
G01 X-75.65396 Y65.15677
G01 X-75.59392 Y65.09672
G01 X-75.49442 Y64.97549
G01 X-75.44106 Y64.89560
G01 X-75.36714 Y64.75730
G01 X-75.33039 Y64.66855
G01 X-75.28485 Y64.51849
G01 X-75.26613 Y64.42428
G01 X-75.25074 Y64.26820
G01 X-75.25074 Y64.17214
G01 X-75.26613 Y64.01608
G01 X-75.28485 Y63.92187
G01 X-75.33039 Y63.77178
G01 X-75.36714 Y63.68303
G01 X-75.44106 Y63.54473
G01 X-75.49442 Y63.46487
G01 X-75.59392 Y63.34364
G01 X-75.66186 Y63.27572
G01 X-75.75998 Y63.19517
G01 X-75.78307 Y63.17623
G01 X-75.86295 Y63.12286
G01 X-76.00126 Y63.04892
G01 X-76.09000 Y63.01217
G01 X-76.24007 Y62.96665
G01 X-76.32287 Y62.95019
G01 X-77.55388 Y62.95017
G01 X-77.63671 Y62.96665
G01 X-77.78677 Y63.01217
G01 X-77.87552 Y63.04892
G01 X-78.01382 Y63.12286
G01 X-78.09371 Y63.17623
G01 X-78.21492 Y63.27572
G01 X-78.28284 Y63.34364
G01 X-78.38233 Y63.46487
G01 X-78.42739 Y63.53231
G01 X-78.43569 Y63.54473
G01 X-78.50963 Y63.68303
G01 X-78.54639 Y63.77178
G01 X-78.59193 Y63.92187
G01 X-78.59592 Y63.94193
G01 X-78.59559 Y63.94379
G01 X-78.59559 Y63.94381
G01 X-78.58629 Y63.99690
G01 X-78.58218 Y64.01890
G01 X-78.57255 Y64.06733
G01 X-78.55954 Y64.15453
G01 X-78.55716 Y64.17894
G01 X-78.55152 Y64.22377
G01 X-78.54595 Y64.26030
G01 X-78.54049 Y64.30363
G01 X-78.53379 Y64.37191
G01 X-78.53082 Y64.41199
G01 X-78.53061 Y64.41638
G01 X-78.52261 Y64.49746
G01 X-78.49935 Y64.65428
G01 X-78.48177 Y64.74242
G01 X-78.45017 Y64.86855
G01 X-78.43569 Y64.89560
G01 X-78.38233 Y64.97549
G01 X-78.28284 Y65.09672
G01 X-78.21492 Y65.16464
G01 X-78.09371 Y65.26413
G01 X-78.01382 Y65.31750
G01 X-77.87552 Y65.39141
G01 X-77.78677 Y65.42819
G01 X-77.63671 Y65.47371
G01 X-77.55388 Y65.49017
G01 X-76.32287 Y65.49017
G01 X-76.24007 Y65.50665
G01 X-76.09000 Y65.55217
G01 X-76.00126 Y65.58892
G01 X-75.86295 Y65.66286
G01 X-75.78307 Y65.71623
G01 X-75.75998 Y65.73517
G01 X-75.66186 Y65.81572
G01 X-75.59392 Y65.88364
G01 X-75.49442 Y66.00487
G01 X-75.44106 Y66.08473
G01 X-75.36714 Y66.22303
G01 X-75.33039 Y66.31178
G01 X-75.28485 Y66.46187
G01 X-75.26613 Y66.55608
G01 X-75.25074 Y66.71214
G01 X-75.25074 Y66.80820
G01 X-75.26613 Y66.96428
G01 X-75.28485 Y67.05849
G01 X-75.31794 Y67.16766
G01 X-75.34058 Y67.20545
G01 X-75.39275 Y67.28361
G01 X-75.48721 Y67.41097
G01 X-75.54139 Y67.47701
G01 X-75.64682 Y67.59334
G01 X-75.70524 Y67.65178
G01 X-75.82160 Y67.75719
G01 X-75.88757 Y67.81132
G01 X-76.01492 Y67.90581
G01 X-76.09310 Y67.95798
G01 X-76.13077 Y67.98053
G01 X-76.39826 Y68.24800
G01 X-80.45918 Y68.24800
G01 X-80.45918 Y66.99908
G01 X-80.41166 Y66.98468
G01 X-80.32695 Y66.93939
G01 X-80.25271 Y66.87845
G01 X-80.23536 Y66.85732
G01 X-80.19177 Y66.80421
G01 X-80.14648 Y66.71950
G01 X-80.11860 Y66.62758
G01 X-80.10920 Y66.53197
G01 X-80.10920 Y66.23906
G01 X-80.11514 Y66.17874
G01 X-80.11852 Y66.11010
G01 X-80.11966 Y66.06296
G01 X-80.11966 Y64.83198
G01 X-80.12263 Y64.75679
G01 X-80.31872 Y64.49665
G01 X-80.51900 Y64.37109
G01 X-80.78113 Y64.10897
G01 X-91.25418 Y64.10897
G01 X-91.25418 Y71.49490
G01 X-84.65511 Y78.09398
G01 X-82.94475 Y78.09398
G01 X-82.90482 Y78.03424
G01 X-82.87373 Y77.99634
G01 X-82.80581 Y77.92842
G01 X-82.76794 Y77.89733
G01 X-82.68806 Y77.84396
G01 X-82.64485 Y77.82088
G01 X-82.55611 Y77.78410
G01 X-82.50919 Y77.76987
G01 X-82.41498 Y77.75113
G01 X-82.37572 Y77.74729
G01 X-82.36589 Y77.74925
G01 X-82.31818 Y77.75994
G01 X-82.25999 Y77.77452
G01 X-82.17178 Y77.79212
G01 X-82.00516 Y77.81684
G01 X-81.92410 Y77.82484
G01 X-81.75748 Y77.83302
G01 X-81.71819 Y77.83398
G01 X-81.46820 Y77.83398
G01 X-81.42888 Y77.83302
G01 X-81.26226 Y77.82484
G01 X-81.18123 Y77.81684
G01 X-81.01458 Y77.79212
G01 X-80.92629 Y77.77452
G01 X-80.86818 Y77.75994
G01 X-80.82045 Y77.74925
G01 X-80.81057 Y77.74727
G01 X-80.77138 Y77.75113
G01 X-80.67717 Y77.76987
G01 X-80.63028 Y77.78410
G01 X-80.54153 Y77.82088
G01 X-80.49830 Y77.84399
G01 X-67.87658 Y77.84399
G01 X-67.80861 Y77.86439
G01 X-67.73876 Y77.87442
G01 X-67.60927 Y77.88374
G01 X-64.23719 Y77.88374
G01 X-64.19297 Y77.88483
G01 X-64.14299 Y77.88727
G01 X-64.04669 Y77.89964
G01 X-63.95940 Y77.91524
G01 X-63.95670 Y77.91585
G01 X-63.81906 Y77.95910
G01 X-63.77715 Y77.97340
G01 X-63.73740 Y77.99294
G01 X-63.60948 Y78.05969
G01 X-63.60715 Y78.06113
G01 X-63.53445 Y78.11178
G01 X-63.45757 Y78.17119
G01 X-63.42053 Y78.20475
G01 X-63.38845 Y78.23528
G01 X-62.85744 Y78.76631
G01 X-62.81314 Y78.80772
G01 X-62.78805 Y78.82964
G01 X-62.62462 Y78.94419
G01 X-62.62175 Y78.94579
G01 X-62.22404 Y79.34348
G01 X-62.20525 Y79.36230
G01 X-62.08200 Y79.23903
G01 X-62.08663 Y79.19199
G01 X-62.08663 Y79.09596
G01 X-62.07126 Y78.93987
G01 X-62.05252 Y78.84566
G01 X-62.04304 Y78.81442
G01 X-62.04304 Y78.81440
G01 X-62.00527 Y78.75021
G01 X-61.98434 Y78.70972
G01 X-61.98099 Y78.70350
G01 X-61.93824 Y78.62397
G01 X-61.93616 Y78.62011
G01 X-61.86212 Y78.48684
G01 X-61.83339 Y78.43873
G01 X-61.81332 Y78.41298
G01 X-61.71619 Y78.29293
G01 X-61.71454 Y78.29118
G01 X-61.65074 Y78.22971
G01 X-61.57842 Y78.16660
G01 X-61.52963 Y78.13004
G01 X-61.45628 Y78.08054
G01 X-61.42420 Y78.06111
G01 X-61.31774 Y78.00706
G01 X-61.25630 Y77.97871
G01 X-61.23631 Y77.97234
G01 X-61.08632 Y77.92646
G01 X-61.07749 Y77.92380
G01 X-60.99930 Y77.91056
G01 X-60.89242 Y77.89725
G01 X-60.84330 Y77.89482
G01 X-60.75470 Y77.89482
G01 X-60.70553 Y77.89725
G01 X-60.59864 Y77.91056
G01 X-60.52046 Y77.92380
G01 X-60.51162 Y77.92646
G01 X-60.36164 Y77.97234
G01 X-60.34165 Y77.97871
G01 X-60.28021 Y78.00706
G01 X-60.18460 Y78.05560
G01 X-60.17378 Y78.06111
G01 X-60.14167 Y78.08054
G01 X-60.06832 Y78.13004
G01 X-60.01952 Y78.16660
G01 X-59.94721 Y78.22971
G01 X-59.88341 Y78.29118
G01 X-59.88176 Y78.29293
G01 X-59.78463 Y78.41298
G01 X-59.76456 Y78.43873
G01 X-59.73583 Y78.48684
G01 X-59.67221 Y78.60134
G01 X-59.66136 Y78.62486
G01 X-59.62826 Y78.70693
G01 X-59.60444 Y78.77556
G01 X-59.58298 Y78.85641
G01 X-59.58280 Y78.85704
G01 X-59.56433 Y78.94353
G01 X-59.56205 Y78.95755
G01 X-59.54973 Y79.09966
G01 X-59.54696 Y79.14399
G01 X-59.54973 Y79.18828
G01 X-59.56205 Y79.33042
G01 X-59.56433 Y79.34444
G01 X-59.58280 Y79.43093
G01 X-59.60444 Y79.51244
G01 X-59.62826 Y79.58105
G01 X-59.66136 Y79.66311
G01 X-59.67221 Y79.68663
G01 X-59.73583 Y79.80114
G01 X-59.76456 Y79.84924
G01 X-59.78463 Y79.87500
G01 X-59.88176 Y79.99504
G01 X-59.88341 Y79.99679
G01 X-59.94721 Y80.05826
G01 X-60.01955 Y80.12140
G01 X-60.06832 Y80.15793
G01 X-60.14167 Y80.20743
G01 X-60.17375 Y80.22689
G01 X-60.26806 Y80.27474
G01 X-60.28015 Y80.28102
G01 X-60.30665 Y80.29496
G01 X-60.32808 Y80.30588
G01 X-60.35983 Y80.32156
G01 X-60.47396 Y80.38940
G01 X-60.47398 Y80.38940
G01 X-60.50068 Y80.39750
G01 X-60.59489 Y80.41625
G01 X-60.75097 Y80.43161
G01 X-60.84701 Y80.43161
G01 X-60.89405 Y80.42699
G01 X-60.99654 Y80.52946
G01 X-61.01731 Y80.55023
G01 X-60.58541 Y80.98213
G01 X-60.55178 Y81.04462
G01 X-60.50947 Y81.10113
G01 X-60.42453 Y81.19923
G01 X-58.60421 Y83.01954
G01 X-58.56913 Y83.05279
G01 X-58.54937 Y83.07055
G01 X-58.42611 Y83.16384
G01 X-58.39751 Y83.16839
G01 X-58.32766 Y83.17842
G01 X-58.19817 Y83.18774
G01 X-57.72154 Y83.18774
G01 X-57.63279 Y83.21952
G01 X-57.55316 Y83.24378
G01 X-57.35712 Y83.29292
G01 X-57.29073 Y83.30618
G01 X-57.09469 Y83.33529
G01 X-57.03599 Y83.34111
G01 X-56.83995 Y83.35079
G01 X-56.78362 Y83.35081
G01 X-56.58760 Y83.34124
G01 X-56.54839 Y83.33801
G01 X-53.08225 Y83.33801
G01 X-52.98240 Y83.37372
G01 X-52.93211 Y83.38904
G01 X-52.73605 Y83.43814
G01 X-52.69764 Y83.44581
G01 X-52.50163 Y83.47487
G01 X-52.46996 Y83.47799
G01 X-52.27392 Y83.48764
G01 X-52.24443 Y83.48764
G01 X-52.04840 Y83.47799
G01 X-52.01672 Y83.47487
G01 X-51.82071 Y83.44581
G01 X-51.78230 Y83.43814
G01 X-51.58624 Y83.38904
G01 X-51.53595 Y83.37372
G01 X-51.33989 Y83.30357
G01 X-51.27164 Y83.27522
G01 X-51.07560 Y83.18251
G01 X-51.01121 Y83.14799
G01 X-50.00712 Y83.14799
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.01121 Y83.14799 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.01121 Y83.14799
G01 X-50.99557 Y83.12452
G01 X-50.90316 Y82.95165
G01 X-50.86641 Y82.86290
G01 X-50.80951 Y82.67530
G01 X-50.79077 Y82.58109
G01 X-50.77154 Y82.38599
G01 X-50.76918 Y82.33799
G01 X-50.76918 Y81.73796
G01 X-50.77154 Y81.68996
G01 X-50.79077 Y81.49486
G01 X-50.80951 Y81.40065
G01 X-50.86641 Y81.21305
G01 X-50.90316 Y81.12430
G01 X-50.99557 Y80.95143
G01 X-51.04893 Y80.87154
G01 X-51.17331 Y80.72001
G01 X-51.24123 Y80.65209
G01 X-51.31916 Y80.58813
G01 X-51.31916 Y80.42991
G01 X-51.16971 Y80.54464
G01 X-51.16923 Y80.54401
G01 X-51.13694 Y80.56951
G01 X-51.06849 Y80.60769
G01 X-51.00494 Y80.63672
G01 X-50.91690 Y80.66717
G01 X-50.82472 Y80.68046
G01 X-50.73168 Y80.67604
G01 X-50.66252 Y80.66611
G01 X-50.57192 Y80.64414
G01 X-50.48713 Y80.60543
G01 X-50.41121 Y80.55135
G01 X-50.35841 Y80.50558
G01 X-50.29414 Y80.43817
G01 X-50.26755 Y80.39677
G01 X-50.24919 Y80.33560
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.19917 Y80.42991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.19917 Y80.42991
G01 X-53.32302 Y80.52493
G01 X-53.34608 Y80.54800
G01 X-53.19917 Y80.54800
G01 X-53.19917 Y80.42991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-43.20422 Y83.32437 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-43.20422 Y83.32437
G01 X-43.21036 Y83.31606
G01 X-43.24679 Y83.28988
G01 X-43.32670 Y83.25201
G01 X-43.41212 Y83.22915
G01 X-43.48095 Y83.21723
G01 X-43.57384 Y83.21015
G01 X-43.66640 Y83.22076
G01 X-43.75527 Y83.24870
G01 X-43.81963 Y83.27591
G01 X-43.90155 Y83.32015
G01 X-43.97363 Y83.37908
G01 X-44.02725 Y83.44334
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-47.51122 Y83.14799 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.51122 Y83.14799
G01 X-46.82080 Y83.14799
G01 X-46.69283 Y83.02003
G01 X-46.73065 Y82.96344
G01 X-46.84614 Y82.74733
G01 X-46.88292 Y82.65859
G01 X-46.95404 Y82.42409
G01 X-46.97279 Y82.32988
G01 X-46.99682 Y82.08602
G01 X-46.99915 Y82.03799
G01 X-46.99915 Y67.21546
G01 X-46.99682 Y67.16746
G01 X-46.97279 Y66.92359
G01 X-46.95404 Y66.82938
G01 X-46.88292 Y66.59489
G01 X-46.84614 Y66.50614
G01 X-46.79382 Y66.40822
G01 X-46.73065 Y66.29004
G01 X-46.67729 Y66.21016
G01 X-46.52184 Y66.02075
G01 X-46.48953 Y65.98511
G01 X-43.74447 Y63.24006
G01 X-43.80198 Y63.27082
G01 X-43.89073 Y63.30757
G01 X-44.11585 Y63.37585
G01 X-44.21006 Y63.39459
G01 X-44.44417 Y63.41765
G01 X-44.54021 Y63.41765
G01 X-44.55926 Y63.41577
G01 X-44.77432 Y63.39459
G01 X-44.86853 Y63.37585
G01 X-45.09365 Y63.30757
G01 X-45.18239 Y63.27082
G01 X-45.27742 Y63.22002
G01 X-47.26918 Y63.22002
G01 X-47.26918 Y82.33799
G01 X-47.27154 Y82.38599
G01 X-47.29077 Y82.58109
G01 X-47.30949 Y82.67530
G01 X-47.36641 Y82.86290
G01 X-47.40317 Y82.95165
G01 X-47.49557 Y83.12452
G01 X-47.51122 Y83.14799
G01 X-47.57561 Y83.18251
G01 X-47.77164 Y83.27522
G01 X-47.83989 Y83.30357
G01 X-48.03596 Y83.37372
G01 X-48.08625 Y83.38904
G01 X-48.28226 Y83.43814
G01 X-48.32069 Y83.44581
G01 X-48.51675 Y83.47487
G01 X-48.54840 Y83.47799
G01 X-48.74444 Y83.48764
G01 X-48.77393 Y83.48764
G01 X-48.96994 Y83.47799
G01 X-49.00159 Y83.47487
G01 X-49.19765 Y83.44581
G01 X-49.23608 Y83.43814
G01 X-49.43209 Y83.38904
G01 X-49.48239 Y83.37372
G01 X-49.67845 Y83.30357
G01 X-49.74667 Y83.27525
G01 X-49.94271 Y83.18254
G01 X-50.00712 Y83.14799
G01 X-50.02280 Y83.12452
G01 X-50.11520 Y82.95165
G01 X-50.15196 Y82.86290
G01 X-50.18589 Y82.75109
G01 X-50.20888 Y82.67530
G01 X-50.22762 Y82.58109
G01 X-50.24682 Y82.38599
G01 X-50.24919 Y82.33799
G01 X-50.24919 Y80.33560
G01 X-50.22879 Y80.26763
G01 X-50.21873 Y80.19776
G01 X-50.20941 Y80.06827
G01 X-50.20941 Y70.03771
G01 X-50.20959 Y70.02089
G01 X-50.20974 Y70.01203
G01 X-50.22424 Y69.86638
G01 X-50.23684 Y69.79651
G01 X-50.24919 Y69.76024
G01 X-50.26755 Y69.70631
G01 X-50.32178 Y69.63385
G01 X-50.39069 Y69.57118
G01 X-50.44662 Y69.52930
G01 X-50.52620 Y69.48081
G01 X-50.61352 Y69.44820
G01 X-50.70542 Y69.43278
G01 X-50.77512 Y69.42778
G01 X-50.86623 Y69.42976
G01 X-50.95541 Y69.44860
G01 X-51.03956 Y69.48363
G01 X-51.09805 Y69.51462
G01 X-51.16851 Y69.56331
G01 X-51.16989 Y69.56151
G01 X-51.31916 Y69.67609
G01 X-51.31916 Y69.51784
G01 X-51.24123 Y69.45386
G01 X-51.17331 Y69.38594
G01 X-51.04893 Y69.23443
G01 X-50.99557 Y69.15455
G01 X-50.90316 Y68.98168
G01 X-50.86641 Y68.89290
G01 X-50.80951 Y68.70530
G01 X-50.79077 Y68.61112
G01 X-50.77154 Y68.41599
G01 X-50.76918 Y68.36799
G01 X-50.76918 Y67.76799
G01 X-50.77154 Y67.71996
G01 X-50.79077 Y67.52486
G01 X-50.80951 Y67.43065
G01 X-50.86641 Y67.24305
G01 X-50.90316 Y67.15430
G01 X-50.99557 Y66.98143
G01 X-51.04893 Y66.90154
G01 X-51.17331 Y66.75001
G01 X-51.24123 Y66.68209
G01 X-51.31916 Y66.61813
G01 X-51.31916 Y66.45991
G01 X-51.16971 Y66.57464
G01 X-51.16923 Y66.57401
G01 X-51.13694 Y66.59951
G01 X-51.06849 Y66.63769
G01 X-51.00494 Y66.66672
G01 X-50.91690 Y66.69717
G01 X-50.82472 Y66.71046
G01 X-50.73168 Y66.70604
G01 X-50.66252 Y66.69611
G01 X-50.57192 Y66.67414
G01 X-50.48713 Y66.63543
G01 X-50.41121 Y66.58135
G01 X-50.35841 Y66.53558
G01 X-50.29414 Y66.46817
G01 X-50.26755 Y66.42677
G01 X-50.24919 Y66.36560
G01 X-50.22879 Y66.29763
G01 X-50.21873 Y66.22776
G01 X-50.20941 Y66.09827
G01 X-50.20941 Y63.75451
G01 X-50.21464 Y63.65753
G01 X-50.22033 Y63.60480
G01 X-50.24919 Y63.48468
G01 X-50.26072 Y63.43670
G01 X-50.30052 Y63.38217
G01 X-50.34627 Y63.32936
G01 X-50.41370 Y63.26508
G01 X-50.45777 Y63.23673
G01 X-50.58431 Y63.19965
G01 X-50.65419 Y63.18959
G01 X-50.78365 Y63.18029
G01 X-53.90516 Y63.18029
G01 X-53.94941 Y63.17920
G01 X-53.99998 Y63.17671
G01 X-54.14450 Y63.16007
G01 X-54.18840 Y63.15393
G01 X-54.23125 Y63.14283
G01 X-54.37115 Y63.10287
G01 X-54.41880 Y63.08583
G01 X-54.50059 Y63.05194
G01 X-54.54636 Y63.03030
G01 X-54.67351 Y62.95964
G01 X-54.71171 Y62.93716
G01 X-54.74712 Y62.91044
G01 X-54.86104 Y62.82002
G01 X-54.89858 Y62.78598
G01 X-54.93061 Y62.75550
G01 X-56.96289 Y60.72322
G01 X-57.03505 Y60.65845
G01 X-57.07633 Y60.62518
G01 X-57.22395 Y60.53475
G01 X-57.29070 Y60.52434
G01 X-57.36040 Y60.51936
G01 X-57.45352 Y60.52160
G01 X-57.50465 Y60.53272
G01 X-57.55682 Y60.56122
G01 X-57.62034 Y60.59594
G01 X-57.67686 Y60.63826
G01 X-57.77500 Y60.72322
G01 X-69.96129 Y72.90951
G01 X-70.03713 Y72.99566
G01 X-70.07541 Y73.04512
G01 X-70.12179 Y73.12622
G01 X-70.15252 Y73.17999
G01 X-70.15705 Y73.19673
G01 X-70.16441 Y73.28421
G01 X-70.16401 Y73.35406
G01 X-70.15461 Y73.44674
G01 X-70.12784 Y73.53595
G01 X-70.08466 Y73.61850
G01 X-70.04653 Y73.67707
G01 X-69.99024 Y73.74819
G01 X-69.92179 Y73.80770
G01 X-69.84356 Y73.85360
G01 X-69.78455 Y73.88121
G01 X-69.68102 Y73.91618
G01 X-69.51679 Y73.95190
G01 X-69.40973 Y73.99777
G01 X-69.31323 Y74.06307
G01 X-69.27041 Y74.10592
G01 X-69.25418 Y74.12142
G01 X-69.24577 Y74.12909
G01 X-69.18146 Y74.17864
G01 X-69.10985 Y74.21690
G01 X-69.04572 Y74.24461
G01 X-68.95710 Y74.27326
G01 X-68.86467 Y74.28464
G01 X-68.83653 Y74.28271
G01 X-68.78796 Y74.26703
G01 X-68.77435 Y74.26254
G01 X-68.70729 Y74.23978
G01 X-68.62080 Y74.20552
G01 X-68.58674 Y74.18997
G01 X-68.55730 Y74.17714
G01 X-68.53909 Y74.17138
G01 X-68.37038 Y74.11974
G01 X-68.36414 Y74.11786
G01 X-68.28319 Y74.10402
G01 X-68.16429 Y74.08921
G01 X-68.10765 Y74.08642
G01 X-68.01915 Y74.08642
G01 X-67.96246 Y74.08921
G01 X-67.84359 Y74.10402
G01 X-67.76261 Y74.11786
G01 X-67.75636 Y74.11974
G01 X-67.58766 Y74.17138
G01 X-67.56945 Y74.17714
G01 X-67.50630 Y74.20620
G01 X-67.38819 Y74.26617
G01 X-67.35050 Y74.28901
G01 X-67.27712 Y74.33854
G01 X-67.22164 Y74.38009
G01 X-67.14085 Y74.45060
G01 X-67.10625 Y74.48245
G01 X-67.07747 Y74.51034
G01 X-67.07638 Y74.51141
G01 X-67.06167 Y74.52568
G01 X-66.96569 Y74.60722
G01 X-66.91466 Y74.61598
G01 X-66.84481 Y74.62601
G01 X-66.71530 Y74.63533
G01 X-65.17832 Y74.63533
G01 X-65.13023 Y74.63406
G01 X-65.10377 Y74.63264
G01 X-64.95035 Y74.61143
G01 X-64.92686 Y74.59439
G01 X-64.87034 Y74.55207
G01 X-64.77225 Y74.46714
G01 X-61.76743 Y71.46232
G01 X-61.73418 Y71.42724
G01 X-61.71642 Y71.40748
G01 X-61.62313 Y71.28421
G01 X-61.61858 Y71.25561
G01 X-61.60855 Y71.18576
G01 X-61.59923 Y71.05627
G01 X-61.59923 Y70.18668
G01 X-61.59951 Y70.16405
G01 X-61.59984 Y70.15142
G01 X-61.61691 Y69.99719
G01 X-61.62574 Y69.95218
G01 X-61.64098 Y69.93153
G01 X-61.65882 Y69.90812
G01 X-61.71475 Y69.83697
G01 X-61.72257 Y69.82717
G01 X-61.75066 Y69.79242
G01 X-61.81332 Y69.71500
G01 X-61.83339 Y69.68924
G01 X-61.86212 Y69.64116
G01 X-61.92574 Y69.52663
G01 X-61.93659 Y69.50311
G01 X-61.96969 Y69.42105
G01 X-61.99351 Y69.35244
G01 X-62.01515 Y69.27093
G01 X-62.03126 Y69.19831
G01 X-62.03362 Y69.18444
G01 X-62.03590 Y69.17042
G01 X-62.04822 Y69.02828
G01 X-62.05099 Y68.98399
G01 X-62.04822 Y68.93966
G01 X-62.04705 Y68.92628
G01 X-62.03590 Y68.79755
G01 X-62.03362 Y68.78353
G01 X-62.01515 Y68.69707
G01 X-61.99351 Y68.61556
G01 X-61.96969 Y68.54695
G01 X-61.93659 Y68.46489
G01 X-61.92574 Y68.44137
G01 X-61.86212 Y68.32684
G01 X-61.83339 Y68.27873
G01 X-61.81332 Y68.25300
G01 X-61.71619 Y68.13291
G01 X-61.71454 Y68.13121
G01 X-61.65074 Y68.06971
G01 X-61.57842 Y68.00660
G01 X-61.52963 Y67.97004
G01 X-61.45628 Y67.92054
G01 X-61.42420 Y67.90113
G01 X-61.31774 Y67.84706
G01 X-61.25630 Y67.81874
G01 X-61.23631 Y67.81236
G01 X-61.08632 Y67.76646
G01 X-61.07749 Y67.76380
G01 X-60.99930 Y67.75056
G01 X-60.89242 Y67.73725
G01 X-60.84330 Y67.73482
G01 X-60.75470 Y67.73482
G01 X-60.70553 Y67.73725
G01 X-60.59864 Y67.75056
G01 X-60.52046 Y67.76380
G01 X-60.51162 Y67.76646
G01 X-60.36164 Y67.81236
G01 X-60.34165 Y67.81874
G01 X-60.28021 Y67.84706
G01 X-60.20040 Y67.88757
G01 X-60.17380 Y67.90108
G01 X-60.14167 Y67.92054
G01 X-60.06832 Y67.97004
G01 X-60.01952 Y68.00660
G01 X-59.94721 Y68.06971
G01 X-59.88341 Y68.13121
G01 X-59.88176 Y68.13291
G01 X-59.78463 Y68.25300
G01 X-59.76456 Y68.27873
G01 X-59.73583 Y68.32684
G01 X-59.67221 Y68.44137
G01 X-59.66136 Y68.46489
G01 X-59.62826 Y68.54695
G01 X-59.60441 Y68.61564
G01 X-59.60350 Y68.61907
G01 X-59.58280 Y68.69707
G01 X-59.56433 Y68.78353
G01 X-59.56205 Y68.79753
G01 X-59.54973 Y68.93966
G01 X-59.54696 Y68.98399
G01 X-59.54973 Y69.02828
G01 X-59.56205 Y69.17042
G01 X-59.56433 Y69.18444
G01 X-59.58280 Y69.27093
G01 X-59.60444 Y69.35244
G01 X-59.62826 Y69.42105
G01 X-59.66136 Y69.50311
G01 X-59.67221 Y69.52663
G01 X-59.73583 Y69.64116
G01 X-59.76456 Y69.68924
G01 X-59.78463 Y69.71500
G01 X-59.87535 Y69.82717
G01 X-59.88320 Y69.83697
G01 X-59.88991 Y69.84550
G01 X-59.89781 Y69.85541
G01 X-59.93979 Y69.90730
G01 X-59.97353 Y69.95160
G01 X-59.97937 Y69.98734
G01 X-59.98940 Y70.05719
G01 X-59.99872 Y70.18668
G01 X-59.99872 Y71.62556
G01 X-59.99981 Y71.66983
G01 X-60.00073 Y71.68843
G01 X-60.00710 Y71.73808
G01 X-60.01985 Y71.81263
G01 X-60.02364 Y71.82493
G01 X-60.04419 Y71.89038
G01 X-60.05849 Y71.93227
G01 X-60.07800 Y71.97202
G01 X-60.10975 Y72.03285
G01 X-60.11582 Y72.04426
G01 X-60.15953 Y72.10605
G01 X-60.19006 Y72.14558
G01 X-60.20263 Y72.15944
G01 X-60.23311 Y72.19145
G01 X-64.04311 Y76.00145
G01 X-64.07512 Y76.03193
G01 X-64.08896 Y76.04448
G01 X-64.12851 Y76.07503
G01 X-64.19033 Y76.11877
G01 X-64.20171 Y76.12482
G01 X-64.26254 Y76.15657
G01 X-64.30227 Y76.17607
G01 X-64.34418 Y76.19037
G01 X-64.40964 Y76.21092
G01 X-64.42185 Y76.21468
G01 X-64.43940 Y76.21826
G01 X-64.49648 Y76.22746
G01 X-64.54619 Y76.23383
G01 X-64.56473 Y76.23475
G01 X-64.60900 Y76.23584
G01 X-66.71530 Y76.23584
G01 X-66.75507 Y76.23673
G01 X-66.77697 Y76.23769
G01 X-66.94961 Y76.26182
G01 X-66.96498 Y76.26543
G01 X-67.00856 Y76.30018
G01 X-67.07638 Y76.35977
G01 X-67.10625 Y76.38872
G01 X-67.14085 Y76.42057
G01 X-67.22164 Y76.49108
G01 X-67.27712 Y76.53264
G01 X-67.35050 Y76.58217
G01 X-67.38819 Y76.60500
G01 X-67.50630 Y76.66497
G01 X-67.56945 Y76.69403
G01 X-67.58766 Y76.69980
G01 X-67.75636 Y76.75143
G01 X-67.77933 Y76.75811
G01 X-67.84275 Y76.77569
G01 X-67.90417 Y76.79502
G01 X-67.97044 Y76.81831
G01 X-67.97193 Y76.81890
G01 X-68.01537 Y76.82321
G01 X-68.11141 Y76.82321
G01 X-68.28700 Y76.80592
G01 X-68.38120 Y76.78717
G01 X-68.44575 Y76.76761
G01 X-68.55004 Y76.73597
G01 X-68.63879 Y76.69921
G01 X-68.79439 Y76.61603
G01 X-68.87424 Y76.56266
G01 X-69.01064 Y76.45075
G01 X-69.07856 Y76.38283
G01 X-69.19047 Y76.24643
G01 X-69.21336 Y76.21222
G01 X-69.22956 Y76.15893
G01 X-69.27376 Y75.98250
G01 X-69.29022 Y75.89998
G01 X-69.31638 Y75.72352
G01 X-69.32382 Y75.64836
G01 X-69.33249 Y75.47193
G01 X-69.33249 Y75.39921
G01 X-69.32380 Y75.22279
G01 X-69.31638 Y75.14765
G01 X-69.29022 Y74.97120
G01 X-69.27376 Y74.88867
G01 X-69.22956 Y74.71225
G01 X-69.21333 Y74.65891
G01 X-69.19047 Y74.62472
G01 X-69.07856 Y74.48832
G01 X-69.01064 Y74.42040
G01 X-68.87424 Y74.30849
G01 X-68.83493 Y74.28220
G01 X-68.78796 Y74.26703
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.21333 Y74.65891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.21333 Y74.65891
G01 X-69.21339 Y74.53556
G01 X-69.22281 Y74.43998
G01 X-69.25070 Y74.34806
G01 X-69.29596 Y74.26335
G01 X-69.35690 Y74.18908
G01 X-69.43116 Y74.12815
G01 X-69.51587 Y74.08288
G01 X-69.60780 Y74.05500
G01 X-69.70338 Y74.04557
G01 X-71.04109 Y74.04557
G01 X-71.50337 Y74.23706
G01 X-71.80190 Y74.53559
G01 X-71.97170 Y74.94547
G01 X-71.99253 Y74.99248
G01 X-71.99336 Y74.99421
G01 X-72.10566 Y75.08636
G01 X-72.18552 Y75.13973
G01 X-72.31518 Y75.20904
G01 X-72.40393 Y75.24580
G01 X-72.54462 Y75.28847
G01 X-72.63883 Y75.30722
G01 X-72.78516 Y75.32164
G01 X-72.83319 Y75.32398
G01 X-80.96642 Y75.32398
G01 X-80.99050 Y75.33399
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.19581 Y75.33399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.19581 Y75.33399
G01 X-82.27445 Y75.36652
G01 X-82.42141 Y75.44509
G01 X-82.50127 Y75.49845
G01 X-82.61768 Y75.59398
G01 X-82.83711 Y75.59398
G01 X-83.63418 Y74.79690
G01 X-83.63418 Y70.66405
G01 X-83.19812 Y70.22800
G01 X-82.20683 Y70.22800
G01 X-82.11260 Y70.20921
G01 X-81.91656 Y70.18015
G01 X-81.83078 Y70.17167
G01 X-81.63477 Y70.16204
G01 X-81.59317 Y70.16100
G01 X-76.69018 Y70.16100
G01 X-76.64857 Y70.16204
G01 X-76.45254 Y70.17167
G01 X-76.36679 Y70.18012
G01 X-76.31202 Y70.18825
G01 X-75.98820 Y70.18825
G01 X-75.94388 Y70.18716
G01 X-75.91357 Y70.18566
G01 X-75.84637 Y70.17703
G01 X-75.76600 Y70.16300
G01 X-75.75945 Y70.16097
G01 X-75.66592 Y70.13158
G01 X-75.62399 Y70.11728
G01 X-75.58419 Y70.09773
G01 X-75.49729 Y70.05239
G01 X-75.49112 Y70.04911
G01 X-75.42440 Y70.00225
G01 X-75.37080 Y69.96087
G01 X-75.34830 Y69.94045
G01 X-75.31624 Y69.90992
G01 X-73.53824 Y68.13192
G01 X-73.50771 Y68.09989
G01 X-73.48732 Y68.07733
G01 X-73.44594 Y68.02379
G01 X-73.39908 Y67.95709
G01 X-73.39580 Y67.95087
G01 X-73.35044 Y67.86397
G01 X-73.33090 Y67.82422
G01 X-73.31658 Y67.78226
G01 X-73.28721 Y67.68874
G01 X-73.28516 Y67.68211
G01 X-73.27114 Y67.60182
G01 X-73.26250 Y67.53459
G01 X-73.26100 Y67.50428
G01 X-73.25994 Y67.45996
G01 X-73.25994 Y61.53836
G01 X-73.32224 Y61.38786
G01 X-73.33664 Y61.35058
G01 X-73.36120 Y61.28195
G01 X-73.38142 Y61.21550
G01 X-73.39862 Y61.14689
G01 X-73.41056 Y61.08700
G01 X-73.42072 Y61.01839
G01 X-73.42628 Y60.96224
G01 X-73.42963 Y60.89360
G01 X-73.43032 Y60.86610
G01 X-73.43032 Y60.09399
G01 X-73.43100 Y60.06643
G01 X-73.43583 Y59.96841
G01 X-73.44139 Y59.91200
G01 X-73.45592 Y59.81398
G01 X-73.46811 Y59.75289
G01 X-73.49265 Y59.65490
G01 X-73.51368 Y59.58578
G01 X-73.54876 Y59.48777
G01 X-73.56413 Y59.44794
G01 X-73.60073 Y59.35957
G01 X-74.41099 Y58.54934
G01 X-74.41226 Y58.54804
G01 X-74.49204 Y58.46826
G01 X-74.52409 Y58.43776
G01 X-74.54660 Y58.41736
G01 X-74.60019 Y58.37596
G01 X-74.66351 Y58.33125
G01 X-74.66694 Y58.32904
G01 X-74.67309 Y58.32582
G01 X-74.75998 Y58.28045
G01 X-74.76059 Y58.28015
G01 X-74.79981 Y58.26089
G01 X-74.84172 Y58.24659
G01 X-74.93524 Y58.21723
G01 X-74.94190 Y58.21517
G01 X-75.02216 Y58.20115
G01 X-75.08942 Y58.19252
G01 X-75.11967 Y58.19102
G01 X-75.16397 Y58.18993
G01 X-75.52986 Y58.18993
G01 X-75.64860 Y58.18210
G01 X-75.71281 Y58.17365
G01 X-75.72513 Y58.17194
G01 X-75.80575 Y58.12384
G01 X-75.81840 Y58.11540
G01 X-75.88124 Y58.07705
G01 X-75.98551 Y58.01911
G01 X-76.01949 Y58.00303
G01 X-76.10115 Y57.96920
G01 X-76.13659 Y57.95653
G01 X-76.25127 Y57.92376
G01 X-76.29422 Y57.91264
G01 X-76.33809 Y57.90649
G01 X-76.45663 Y57.89285
G01 X-76.49414 Y57.89102
G01 X-76.53839 Y57.88993
G01 X-76.68106 Y57.88993
G01 X-76.81055 Y57.88061
G01 X-76.88040 Y57.87057
G01 X-77.00946 Y57.83184
G01 X-77.05089 Y57.80522
G01 X-77.11827 Y57.74101
G01 X-77.16404 Y57.68823
G01 X-77.21814 Y57.61228
G01 X-77.25690 Y57.52747
G01 X-77.27888 Y57.43684
G01 X-77.28881 Y57.36768
G01 X-77.29155 Y57.25145
G01 X-77.27918 Y57.19453
G01 X-77.27918 Y57.19448
G01 X-77.26259 Y57.16316
G01 X-77.25170 Y57.14309
G01 X-77.22841 Y57.10149
G01 X-77.18172 Y57.02663
G01 X-77.13483 Y56.95122
G01 X-77.07121 Y56.83672
G01 X-77.06036 Y56.81320
G01 X-77.02726 Y56.73113
G01 X-77.00344 Y56.66252
G01 X-76.98180 Y56.58101
G01 X-76.96333 Y56.49453
G01 X-76.96105 Y56.48051
G01 X-76.94873 Y56.33839
G01 X-76.94596 Y56.29407
G01 X-76.94873 Y56.24977
G01 X-76.96105 Y56.10766
G01 X-76.96333 Y56.09361
G01 X-76.98180 Y56.00710
G01 X-77.00344 Y55.92564
G01 X-77.02726 Y55.85701
G01 X-77.06033 Y55.77500
G01 X-77.07121 Y55.75145
G01 X-77.13481 Y55.63695
G01 X-77.14921 Y55.61198
G01 X-77.20704 Y55.58221
G01 X-77.36384 Y55.50807
G01 X-77.42919 Y55.48092
G01 X-77.58601 Y55.42481
G01 X-77.63623 Y55.40954
G01 X-77.79307 Y55.37025
G01 X-77.83336 Y55.36222
G01 X-77.99020 Y55.33895
G01 X-78.02477 Y55.33555
G01 X-78.18162 Y55.32783
G01 X-78.21436 Y55.32783
G01 X-78.37118 Y55.33555
G01 X-78.40575 Y55.33895
G01 X-78.56259 Y55.36222
G01 X-78.60288 Y55.37025
G01 X-78.75972 Y55.40954
G01 X-78.80994 Y55.42481
G01 X-78.95700 Y55.47744
G01 X-80.35700 Y55.47744
G01 X-80.38817 Y55.47820
G01 X-80.48618 Y55.48302
G01 X-80.54986 Y55.48932
G01 X-80.64788 Y55.50385
G01 X-80.71651 Y55.51754
G01 X-80.81450 Y55.54208
G01 X-80.89152 Y55.56550
G01 X-80.90810 Y55.57144
G01 X-80.96850 Y55.62618
G01 X-80.99738 Y55.65369
G01 X-81.96258 Y56.61889
G01 X-81.99009 Y56.64777
G01 X-82.05598 Y56.72049
G01 X-82.10787 Y56.78376
G01 X-82.16690 Y56.86334
G01 X-82.21542 Y56.93590
G01 X-82.21577 Y56.93705
G01 X-82.24513 Y57.03054
G01 X-82.24719 Y57.03715
G01 X-82.25199 Y57.06024
G01 X-82.26121 Y57.11746
G01 X-82.26985 Y57.18467
G01 X-82.27135 Y57.21495
G01 X-82.27244 Y57.25927
G01 X-82.27244 Y57.73448
G01 X-82.28174 Y57.86394
G01 X-82.28618 Y57.89491
G01 X-82.28618 Y58.03184
G01 X-82.43617 Y58.46590
G01 X-82.43617 Y60.06589
G01 X-82.38374 Y60.32251
G01 X-82.20388 Y60.45637
G01 X-82.19075 Y60.45164
G01 X-82.12220 Y60.42632
G01 X-82.11483 Y60.42365
G01 X-81.95799 Y60.36752
G01 X-81.90063 Y60.35007
G01 X-81.74379 Y60.31078
G01 X-81.69667 Y60.30140
G01 X-81.53985 Y60.27814
G01 X-81.49865 Y60.27407
G01 X-81.34183 Y60.26635
G01 X-81.30254 Y60.26635
G01 X-81.14570 Y60.27407
G01 X-81.10450 Y60.27814
G01 X-80.94768 Y60.30140
G01 X-80.90056 Y60.31078
G01 X-80.74371 Y60.35007
G01 X-80.68636 Y60.36752
G01 X-80.52952 Y60.42365
G01 X-80.52215 Y60.42632
G01 X-80.45360 Y60.45164
G01 X-80.29119 Y60.49477
G01 X-80.27823 Y60.51055
G01 X-80.22487 Y60.59043
G01 X-80.17155 Y60.69018
G01 X-79.95553 Y60.69018
G01 X-79.94374 Y60.62015
G01 X-79.91120 Y60.53292
G01 X-79.86274 Y60.45342
G01 X-79.82088 Y60.39749
G01 X-79.75820 Y60.32853
G01 X-79.68575 Y60.27430
G01 X-79.59543 Y60.24354
G01 X-79.52556 Y60.23094
G01 X-79.37994 Y60.21647
G01 X-79.37107 Y60.21629
G01 X-79.35428 Y60.21614
G01 X-79.16058 Y60.21614
G01 X-79.03115 Y60.22543
G01 X-78.96124 Y60.23549
G01 X-78.89330 Y60.25589
G01 X-77.97941 Y60.25589
G01 X-77.87552 Y60.31141
G01 X-77.78677 Y60.34819
G01 X-77.63671 Y60.39371
G01 X-77.55388 Y60.41017
G01 X-76.32287 Y60.41019
G01 X-76.24007 Y60.39371
G01 X-76.09000 Y60.34819
G01 X-76.00126 Y60.31141
G01 X-75.86295 Y60.23750
G01 X-75.78307 Y60.18413
G01 X-75.71733 Y60.13018
G01 X-75.57405 Y60.13018
G01 X-75.20019 Y60.50404
G01 X-75.20019 Y67.04990
G01 X-75.31794 Y67.16766
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.58702 Y63.28532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.58702 Y63.28532
G01 X-70.56860 Y63.25410
G01 X-70.56855 Y63.25405
G01 X-70.47371 Y63.17623
G01 X-70.39382 Y63.12286
G01 X-70.25552 Y63.04892
G01 X-70.16677 Y63.01217
G01 X-70.01671 Y62.96665
G01 X-69.93388 Y62.95017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.70287 Y62.95019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.70287 Y62.95019
G01 X-68.62007 Y62.96665
G01 X-68.47000 Y63.01217
G01 X-68.38126 Y63.04892
G01 X-68.24295 Y63.12286
G01 X-68.16307 Y63.17623
G01 X-68.09733 Y63.23018
G01 X-67.43485 Y63.23018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.60838 Y65.47018 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.60838 Y65.47018
G01 X-68.47000 Y65.42819
G01 X-68.38126 Y65.39141
G01 X-68.24295 Y65.31750
G01 X-68.16307 Y65.26413
G01 X-68.09733 Y65.21018
G01 X-66.14438 Y65.21018
G01 X-66.09635 Y65.20782
G01 X-65.99879 Y65.19822
G01 X-65.90458 Y65.17947
G01 X-65.81078 Y65.15103
G01 X-65.72203 Y65.11425
G01 X-65.63559 Y65.06804
G01 X-65.55571 Y65.01468
G01 X-65.47994 Y64.95250
G01 X-65.44433 Y64.92022
G01 X-64.36615 Y63.84201
G01 X-64.33384 Y63.80638
G01 X-64.27166 Y63.73061
G01 X-64.21830 Y63.65075
G01 X-64.17209 Y63.56429
G01 X-64.13534 Y63.47554
G01 X-64.10689 Y63.38176
G01 X-64.08815 Y63.28755
G01 X-64.07855 Y63.18999
G01 X-64.07618 Y63.14196
G01 X-64.07618 Y62.49713
G01 X-64.02223 Y62.43140
G01 X-63.96887 Y62.35154
G01 X-63.89493 Y62.21321
G01 X-63.85818 Y62.12446
G01 X-63.81266 Y61.97440
G01 X-63.79391 Y61.88019
G01 X-63.77855 Y61.72411
G01 X-63.77855 Y61.62805
G01 X-63.79391 Y61.47199
G01 X-63.81266 Y61.37778
G01 X-63.85818 Y61.22769
G01 X-63.89493 Y61.13894
G01 X-63.96887 Y61.00064
G01 X-64.02223 Y60.92078
G01 X-64.12173 Y60.79955
G01 X-64.18965 Y60.73163
G01 X-64.31088 Y60.63214
G01 X-64.39074 Y60.57877
G01 X-64.52907 Y60.50483
G01 X-64.61779 Y60.46808
G01 X-64.76788 Y60.42256
G01 X-64.86209 Y60.40382
G01 X-65.01817 Y60.38845
G01 X-65.11421 Y60.38845
G01 X-65.12952 Y60.38995
G01 X-65.27029 Y60.40382
G01 X-65.36450 Y60.42256
G01 X-65.51459 Y60.46808
G01 X-65.60331 Y60.50483
G01 X-65.74164 Y60.57877
G01 X-65.82149 Y60.63214
G01 X-65.94273 Y60.73163
G01 X-65.98753 Y60.77643
G01 X-65.98972 Y60.78073
G01 X-65.98974 Y60.78075
G01 X-66.00272 Y60.80605
G01 X-66.01928 Y60.83696
G01 X-66.04258 Y60.87857
G01 X-66.08248 Y60.94349
G01 X-66.08906 Y60.95329
G01 X-66.12932 Y61.01895
G01 X-66.19294 Y61.13346
G01 X-66.20379 Y61.15698
G01 X-66.23689 Y61.23904
G01 X-66.26071 Y61.30765
G01 X-66.28235 Y61.38916
G01 X-66.30082 Y61.47565
G01 X-66.30310 Y61.48967
G01 X-66.31542 Y61.63178
G01 X-66.31819 Y61.67610
G01 X-66.31702 Y61.69919
G01 X-66.31545 Y61.72040
G01 X-66.30310 Y61.86251
G01 X-66.30082 Y61.87656
G01 X-66.28235 Y61.96307
G01 X-66.26071 Y62.04455
G01 X-66.23689 Y62.11316
G01 X-66.20382 Y62.19518
G01 X-66.19292 Y62.21875
G01 X-66.15545 Y62.28624
G01 X-66.13074 Y62.33396
G01 X-66.09754 Y62.40310
G01 X-66.09124 Y62.41598
G01 X-66.06566 Y62.46726
G01 X-66.05205 Y62.49566
G01 X-66.05924 Y62.70643
G01 X-66.06747 Y62.74041
G01 X-66.06894 Y62.74466
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.70287 Y60.41019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.70287 Y60.41019
G01 X-68.62007 Y60.39371
G01 X-68.47000 Y60.34819
G01 X-68.38126 Y60.31141
G01 X-68.24295 Y60.23750
G01 X-68.16307 Y60.18413
G01 X-68.09733 Y60.13018
G01 X-67.44156 Y60.13018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.38967 Y60.10979 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.38967 Y60.10979
G01 X-66.32177 Y60.13018
G01 X-65.89038 Y60.13018
G01 X-65.84235 Y60.12782
G01 X-65.74479 Y60.11822
G01 X-65.65058 Y60.09947
G01 X-65.55678 Y60.07103
G01 X-65.46803 Y60.03425
G01 X-65.38159 Y59.98804
G01 X-65.30171 Y59.93468
G01 X-65.22594 Y59.87250
G01 X-65.19033 Y59.84022
G01 X-64.36615 Y59.01601
G01 X-64.33384 Y58.98038
G01 X-64.27166 Y58.90461
G01 X-64.21830 Y58.82472
G01 X-64.17209 Y58.73829
G01 X-64.13534 Y58.64954
G01 X-64.10689 Y58.55576
G01 X-64.08815 Y58.46155
G01 X-64.07855 Y58.36399
G01 X-64.07618 Y58.31596
G01 X-64.07618 Y57.49714
G01 X-64.02223 Y57.43141
G01 X-63.96887 Y57.35152
G01 X-63.89493 Y57.21322
G01 X-63.85818 Y57.12447
G01 X-63.81266 Y56.97441
G01 X-63.79391 Y56.88018
G01 X-63.77855 Y56.72412
G01 X-63.77855 Y56.62806
G01 X-63.79391 Y56.47200
G01 X-63.81266 Y56.37776
G01 X-63.85818 Y56.22770
G01 X-63.89493 Y56.13895
G01 X-63.96887 Y56.00065
G01 X-64.02223 Y55.92077
G01 X-64.12173 Y55.79956
G01 X-64.18965 Y55.73161
G01 X-64.31088 Y55.63215
G01 X-64.39074 Y55.57878
G01 X-64.52907 Y55.50484
G01 X-64.61779 Y55.46809
G01 X-64.76788 Y55.42255
G01 X-64.86209 Y55.40383
G01 X-65.01817 Y55.38843
G01 X-65.11421 Y55.38843
G01 X-65.27029 Y55.40383
G01 X-65.36450 Y55.42255
G01 X-65.51459 Y55.46809
G01 X-65.60331 Y55.50484
G01 X-65.74164 Y55.57878
G01 X-65.82149 Y55.63215
G01 X-65.94273 Y55.73161
G01 X-66.01065 Y55.79956
G01 X-66.11014 Y55.92077
G01 X-66.16351 Y56.00065
G01 X-66.23744 Y56.13895
G01 X-66.27420 Y56.22770
G01 X-66.31972 Y56.37776
G01 X-66.33846 Y56.47200
G01 X-66.35383 Y56.62806
G01 X-66.35383 Y56.72412
G01 X-66.33846 Y56.88018
G01 X-66.31972 Y56.97441
G01 X-66.27420 Y57.12447
G01 X-66.23744 Y57.21322
G01 X-66.16351 Y57.35152
G01 X-66.11014 Y57.43141
G01 X-66.05619 Y57.49714
G01 X-66.05619 Y57.90590
G01 X-66.30044 Y58.15018
G01 X-68.09733 Y58.15018
G01 X-68.16307 Y58.09623
G01 X-68.24295 Y58.04286
G01 X-68.32837 Y57.99719
G01 X-68.32837 Y57.98454
G01 X-67.92789 Y57.58406
G01 X-67.23798 Y57.58406
G01 X-67.14240 Y57.57464
G01 X-67.05047 Y57.54677
G01 X-66.96576 Y57.50149
G01 X-66.89149 Y57.44055
G01 X-66.83056 Y57.36628
G01 X-66.78530 Y57.28157
G01 X-66.75741 Y57.18965
G01 X-66.74798 Y57.09407
G01 X-66.74798 Y55.49407
G01 X-66.75741 Y55.39847
G01 X-66.78530 Y55.30654
G01 X-66.83056 Y55.22184
G01 X-66.89149 Y55.14759
G01 X-66.96576 Y55.08663
G01 X-67.05047 Y55.04137
G01 X-67.14240 Y55.01348
G01 X-67.16848 Y55.01091
G01 X-67.23798 Y55.00406
G01 X-68.53198 Y55.00406
G01 X-68.61356 Y55.02714
G01 X-68.67859 Y55.03581
G01 X-68.79873 Y55.04383
G01 X-68.83800 Y55.04383
G01 X-68.88329 Y55.04498
G01 X-68.90282 Y55.04693
G01 X-68.99977 Y55.07259
G01 X-69.08382 Y55.11538
G01 X-69.15723 Y55.17482
G01 X-69.21664 Y55.24820
G01 X-69.25949 Y55.33225
G01 X-69.28511 Y55.42923
G01 X-69.28710 Y55.44873
G01 X-69.28824 Y55.49407
G01 X-69.28824 Y55.96263
G01 X-69.29754 Y56.09209
G01 X-69.30759 Y56.16197
G01 X-69.31214 Y56.19059
G01 X-69.40541 Y56.31383
G01 X-69.42316 Y56.33359
G01 X-69.45641 Y56.36867
G01 X-69.90531 Y56.81754
G01 X-69.99029 Y56.90255
G01 X-70.02083 Y56.93461
G01 X-70.04120 Y56.95709
G01 X-70.08260 Y57.01068
G01 X-70.12949 Y57.07743
G01 X-70.13276 Y57.08360
G01 X-70.17810 Y57.17050
G01 X-70.19764 Y57.21025
G01 X-70.21196 Y57.25224
G01 X-70.24132 Y57.34573
G01 X-70.24341 Y57.35244
G01 X-70.25740 Y57.43265
G01 X-70.26604 Y57.49991
G01 X-70.26754 Y57.53014
G01 X-70.26863 Y57.57449
G01 X-70.26863 Y57.70331
G01 X-70.27795 Y57.83283
G01 X-70.28798 Y57.90268
G01 X-70.30668 Y57.99821
G01 X-70.38138 Y58.06605
G01 X-70.40030 Y58.08149
G01 X-70.43286 Y58.10938
G01 X-70.45014 Y58.12490
G01 X-70.49212 Y58.16036
G01 X-70.54257 Y58.20039
G01 X-70.57038 Y58.22561
G01 X-70.63294 Y58.28817
G01 X-70.65816 Y58.31601
G01 X-70.73236 Y58.40948
G01 X-70.75903 Y58.44484
G01 X-70.78148 Y58.48299
G01 X-70.83947 Y58.58734
G01 X-70.85552 Y58.62124
G01 X-70.88940 Y58.70306
G01 X-70.90205 Y58.73839
G01 X-70.93482 Y58.85317
G01 X-70.94592 Y58.89602
G01 X-70.95207 Y58.93991
G01 X-70.96571 Y59.05843
G01 X-70.96753 Y59.09595
G01 X-70.96753 Y59.18441
G01 X-70.96571 Y59.22193
G01 X-70.95207 Y59.34047
G01 X-70.94592 Y59.38434
G01 X-70.93479 Y59.42724
G01 X-70.90203 Y59.54197
G01 X-70.88940 Y59.57733
G01 X-70.85552 Y59.65909
G01 X-70.83947 Y59.69305
G01 X-70.78148 Y59.79737
G01 X-70.75903 Y59.83554
G01 X-70.73233 Y59.87095
G01 X-70.70261 Y59.90839
G01 X-70.63990 Y59.99795
G01 X-70.62862 Y60.01629
G01 X-70.58890 Y60.07585
G01 X-70.58834 Y60.07661
G01 X-70.57211 Y60.10336
G01 X-70.47371 Y60.18413
G01 X-70.39382 Y60.23750
G01 X-70.25552 Y60.31141
G01 X-70.16677 Y60.34819
G01 X-70.01671 Y60.39371
G01 X-69.93388 Y60.41017
G01 X-68.70287 Y60.41019
G01 X-68.62007 Y60.42665
G01 X-68.47000 Y60.47217
G01 X-68.38126 Y60.50892
G01 X-68.24295 Y60.58286
G01 X-68.16307 Y60.63623
G01 X-68.13998 Y60.65517
G01 X-68.04186 Y60.73572
G01 X-68.03736 Y60.74019
G01 X-67.77252 Y60.74019
G01 X-67.78088 Y60.68218
G01 X-67.77646 Y60.58908
G01 X-67.75449 Y60.49851
G01 X-67.73163 Y60.43247
G01 X-67.69292 Y60.34773
G01 X-67.63886 Y60.27186
G01 X-67.57145 Y60.20758
G01 X-67.51654 Y60.16440
G01 X-67.47110 Y60.13671
G01 X-67.44156 Y60.13018
G01 X-67.30054 Y60.09904
G01 X-67.25360 Y60.09455
G01 X-67.16754 Y60.09043
G01 X-66.58901 Y60.09043
G01 X-66.45954 Y60.09975
G01 X-66.38967 Y60.10979
G01 X-66.32175 Y60.13018
G01 X-66.26046 Y60.14860
G01 X-66.21900 Y60.17522
G01 X-66.15157 Y60.23953
G01 X-66.10582 Y60.29234
G01 X-66.05180 Y60.36823
G01 X-66.01311 Y60.45299
G01 X-65.99117 Y60.54354
G01 X-65.98123 Y60.61271
G01 X-65.97849 Y60.72894
G01 X-65.98972 Y60.78073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.05205 Y62.49566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.05205 Y62.49566
G01 X-66.05619 Y62.61694
G01 X-66.05619 Y62.73190
G01 X-66.06894 Y62.74466
G01 X-66.10455 Y62.80153
G01 X-66.20823 Y62.93787
G01 X-66.22220 Y62.95306
G01 X-66.24832 Y62.98029
G01 X-66.36978 Y63.10175
G01 X-66.46800 Y63.18679
G01 X-66.52452 Y63.22908
G01 X-66.54786 Y63.24603
G01 X-66.70087 Y63.26721
G01 X-66.72736 Y63.26863
G01 X-66.77582 Y63.26995
G01 X-67.16754 Y63.26995
G01 X-67.29701 Y63.26063
G01 X-67.36688 Y63.25060
G01 X-67.43485 Y63.23018
G01 X-67.49609 Y63.21179
G01 X-67.53754 Y63.18517
G01 X-67.60498 Y63.12085
G01 X-67.65073 Y63.06805
G01 X-67.70475 Y62.99215
G01 X-67.74344 Y62.90739
G01 X-67.76386 Y62.82309
G01 X-67.76538 Y62.81684
G01 X-67.77531 Y62.74768
G01 X-67.77806 Y62.63145
G01 X-67.77562 Y62.62020
G01 X-68.03742 Y62.62020
G01 X-68.04186 Y62.62464
G01 X-68.16307 Y62.72413
G01 X-68.24295 Y62.77750
G01 X-68.38126 Y62.85141
G01 X-68.47000 Y62.88819
G01 X-68.62007 Y62.93371
G01 X-68.70287 Y62.95019
G01 X-69.93388 Y62.95017
G01 X-70.01671 Y62.93371
G01 X-70.16677 Y62.88819
G01 X-70.25552 Y62.85141
G01 X-70.39382 Y62.77750
G01 X-70.47371 Y62.72413
G01 X-70.59492 Y62.62464
G01 X-70.59936 Y62.62020
G01 X-70.77241 Y62.62020
G01 X-70.72542 Y62.66716
G01 X-70.64188 Y62.77877
G01 X-70.60838 Y62.84011
G01 X-70.57168 Y62.92581
G01 X-70.55186 Y63.01689
G01 X-70.54968 Y63.11008
G01 X-70.55468 Y63.17976
G01 X-70.56804 Y63.25319
G01 X-70.58702 Y63.28532
G01 X-70.63921 Y63.36304
G01 X-70.64188 Y63.36701
G01 X-70.66261 Y63.39754
G01 X-70.70256 Y63.45192
G01 X-70.73236 Y63.48948
G01 X-70.75900 Y63.52482
G01 X-70.78148 Y63.56299
G01 X-70.83947 Y63.66734
G01 X-70.85552 Y63.70124
G01 X-70.88940 Y63.78306
G01 X-70.90205 Y63.81839
G01 X-70.93482 Y63.93317
G01 X-70.94592 Y63.97602
G01 X-70.95207 Y64.01991
G01 X-70.96571 Y64.13843
G01 X-70.96753 Y64.17595
G01 X-70.96753 Y64.26441
G01 X-70.96571 Y64.30193
G01 X-70.95207 Y64.42047
G01 X-70.94592 Y64.46434
G01 X-70.93479 Y64.50724
G01 X-70.90200 Y64.62210
G01 X-70.88940 Y64.65733
G01 X-70.85552 Y64.73909
G01 X-70.83947 Y64.77305
G01 X-70.78150 Y64.87737
G01 X-70.74310 Y64.94026
G01 X-70.73467 Y64.95288
G01 X-70.67546 Y65.05509
G01 X-70.65704 Y65.09202
G01 X-70.64574 Y65.11384
G01 X-70.64569 Y65.11387
G01 X-70.59492 Y65.16464
G01 X-70.47371 Y65.26413
G01 X-70.39382 Y65.31750
G01 X-70.25552 Y65.39141
G01 X-70.16677 Y65.42819
G01 X-70.02829 Y65.47018
G01 X-70.01615 Y65.47198
G01 X-69.92138 Y65.48135
G01 X-69.76454 Y65.48905
G01 X-69.71839 Y65.49017
G01 X-68.91836 Y65.49017
G01 X-68.87221 Y65.48905
G01 X-68.71537 Y65.48135
G01 X-68.62060 Y65.47198
G01 X-68.60838 Y65.47018
G01 X-68.11839 Y65.47018
G01 X-68.02279 Y65.47960
G01 X-67.93086 Y65.50746
G01 X-67.84615 Y65.55275
G01 X-67.77191 Y65.61369
G01 X-67.71943 Y65.67762
G01 X-67.71098 Y65.68796
G01 X-67.66569 Y65.77267
G01 X-67.63780 Y65.86459
G01 X-67.62840 Y65.96017
G01 X-67.62835 Y67.12555
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.64404 Y68.02981 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.64404 Y68.02981
G01 X-69.57612 Y68.05018
G01 X-69.51493 Y68.06855
G01 X-69.47351 Y68.09517
G01 X-69.40609 Y68.15945
G01 X-69.36032 Y68.21223
G01 X-69.30625 Y68.28815
G01 X-69.26754 Y68.37294
G01 X-69.24557 Y68.46354
G01 X-69.23564 Y68.53271
G01 X-69.23122 Y68.62575
G01 X-69.24412 Y68.71538
G01 X-69.26919 Y68.76636
G01 X-69.28613 Y68.80078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.55296 Y68.05018 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.55296 Y68.05018
G01 X-69.57615 Y68.05018
G01 X-69.64404 Y68.02981
G01 X-69.71389 Y68.01975
G01 X-69.84341 Y68.01043
G01 X-70.51839 Y68.01043
G01 X-70.56362 Y68.00931
G01 X-70.58316 Y68.00733
G01 X-70.65928 Y67.98821
G01 X-70.68011 Y67.98170
G01 X-70.68115 Y67.98127
G01 X-70.76436 Y67.93878
G01 X-70.83761 Y67.87944
G01 X-70.85189 Y67.86321
G01 X-70.89700 Y67.80611
G01 X-70.93987 Y67.72201
G01 X-70.96553 Y67.62499
G01 X-70.96748 Y67.60545
G01 X-70.96863 Y67.56019
G01 X-70.96863 Y65.96019
G01 X-70.96748 Y65.91493
G01 X-70.96553 Y65.89542
G01 X-70.93987 Y65.79840
G01 X-70.89748 Y65.71506
G01 X-70.89700 Y65.71427
G01 X-70.81661 Y65.61836
G01 X-70.80830 Y65.61016
G01 X-70.79339 Y65.59573
G01 X-70.69972 Y65.50718
G01 X-70.69725 Y65.50485
G01 X-70.61399 Y65.47960
G01 X-70.51839 Y65.47018
G01 X-70.02829 Y65.47018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.65704 Y65.09202 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.65704 Y65.09202
G01 X-70.64569 Y65.11387
G01 X-70.64300 Y65.11910
G01 X-70.64269 Y65.11966
G01 X-70.62951 Y65.21127
G01 X-70.63393 Y65.30437
G01 X-70.65590 Y65.39494
G01 X-70.67876 Y65.46098
G01 X-70.69969 Y65.50716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.32287 Y60.41019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.32287 Y60.41019
G01 X-76.24007 Y60.42665
G01 X-76.09000 Y60.47217
G01 X-76.00126 Y60.50892
G01 X-75.86295 Y60.58286
G01 X-75.78307 Y60.63623
G01 X-75.66186 Y60.73572
G01 X-75.59392 Y60.80364
G01 X-75.49442 Y60.92487
G01 X-75.44106 Y61.00473
G01 X-75.36714 Y61.14303
G01 X-75.33039 Y61.23178
G01 X-75.28485 Y61.38187
G01 X-75.26613 Y61.47608
G01 X-75.25074 Y61.63214
G01 X-75.25074 Y61.72820
G01 X-75.26613 Y61.88428
G01 X-75.28485 Y61.97849
G01 X-75.33039 Y62.12855
G01 X-75.36714 Y62.21730
G01 X-75.44106 Y62.35560
G01 X-75.49442 Y62.43549
G01 X-75.59392 Y62.55672
G01 X-75.65396 Y62.61677
G01 X-75.66186 Y62.62464
G01 X-75.78307 Y62.72413
G01 X-75.86295 Y62.77750
G01 X-76.00126 Y62.85141
G01 X-76.09000 Y62.88819
G01 X-76.24007 Y62.93371
G01 X-76.32287 Y62.95019
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.55388 Y62.95017 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.55388 Y62.95017
G01 X-77.63671 Y62.93371
G01 X-77.78677 Y62.88819
G01 X-77.87552 Y62.85141
G01 X-78.01382 Y62.77750
G01 X-78.09371 Y62.72413
G01 X-78.11677 Y62.70518
G01 X-78.15942 Y62.67018
G01 X-78.51476 Y62.67018
G01 X-78.51659 Y62.70854
G01 X-78.53856 Y62.79911
G01 X-78.56142 Y62.86513
G01 X-78.60011 Y62.94981
G01 X-78.65411 Y63.02563
G01 X-78.66094 Y63.03216
G01 X-78.72147 Y63.08989
G01 X-78.77638 Y63.13310
G01 X-78.85479 Y63.18352
G01 X-78.94136 Y63.21816
G01 X-79.03290 Y63.23579
G01 X-79.10247 Y63.24242
G01 X-79.19556 Y63.24239
G01 X-79.25789 Y63.23038
G01 X-79.36521 Y63.17430
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.51900 Y64.37109 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.51900 Y64.37109
G01 X-80.55916 Y64.34592
G01 X-80.59919 Y64.34198
G01 X-82.29919 Y64.34198
G01 X-82.39479 Y64.35138
G01 X-82.48671 Y64.37927
G01 X-82.57142 Y64.42456
G01 X-82.64567 Y64.48549
G01 X-82.70660 Y64.55974
G01 X-82.75189 Y64.64445
G01 X-82.77978 Y64.73637
G01 X-82.78918 Y64.83198
G01 X-82.78918 Y66.53197
G01 X-82.77978 Y66.62758
G01 X-82.75189 Y66.71950
G01 X-82.70660 Y66.80421
G01 X-82.64567 Y66.87845
G01 X-82.57142 Y66.93939
G01 X-82.48671 Y66.98468
G01 X-82.43919 Y66.99908
G01 X-82.43919 Y68.24800
G01 X-83.60820 Y68.24800
G01 X-83.65621 Y68.25036
G01 X-83.75377 Y68.25996
G01 X-83.84798 Y68.27871
G01 X-83.94175 Y68.30715
G01 X-84.03050 Y68.34393
G01 X-84.11696 Y68.39011
G01 X-84.19682 Y68.44350
G01 X-84.27259 Y68.50565
G01 X-84.30822 Y68.53796
G01 X-85.32422 Y69.55394
G01 X-85.35651 Y69.58955
G01 X-85.41869 Y69.66532
G01 X-85.47205 Y69.74520
G01 X-85.51825 Y69.83164
G01 X-85.55503 Y69.92038
G01 X-85.58348 Y70.01419
G01 X-85.60223 Y70.10839
G01 X-85.61183 Y70.20596
G01 X-85.61419 Y70.25396
G01 X-85.61419 Y75.20696
G01 X-85.61183 Y75.25499
G01 X-85.60223 Y75.35255
G01 X-85.58348 Y75.44676
G01 X-85.55503 Y75.54057
G01 X-85.51828 Y75.62931
G01 X-85.47205 Y75.71575
G01 X-85.41869 Y75.79561
G01 X-85.35651 Y75.87138
G01 X-85.32422 Y75.90701
G01 X-83.94721 Y77.28402
G01 X-83.91158 Y77.31630
G01 X-83.83581 Y77.37848
G01 X-83.75595 Y77.43185
G01 X-83.66952 Y77.47808
G01 X-83.58077 Y77.51483
G01 X-83.48697 Y77.54328
G01 X-83.39276 Y77.56202
G01 X-83.29520 Y77.57163
G01 X-83.24719 Y77.57399
G01 X-82.61765 Y77.57399
G01 X-82.50127 Y77.66949
G01 X-82.42141 Y77.72286
G01 X-82.37572 Y77.74729
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.81057 Y77.74727 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.81057 Y77.74727
G01 X-80.76497 Y77.72286
G01 X-80.68509 Y77.66949
G01 X-80.55629 Y77.56380
G01 X-80.48837 Y77.49586
G01 X-80.38265 Y77.36705
G01 X-80.32929 Y77.28720
G01 X-80.25075 Y77.14023
G01 X-80.21400 Y77.05148
G01 X-80.16561 Y76.89205
G01 X-80.14689 Y76.79784
G01 X-80.13056 Y76.63200
G01 X-80.13056 Y76.53594
G01 X-80.14689 Y76.37013
G01 X-80.16561 Y76.27592
G01 X-80.21400 Y76.11646
G01 X-80.25075 Y76.02771
G01 X-80.32929 Y75.88075
G01 X-80.38265 Y75.80089
G01 X-80.41049 Y75.76696
G01 X-80.48837 Y75.67209
G01 X-80.55629 Y75.60417
G01 X-80.68509 Y75.49845
G01 X-80.76497 Y75.44509
G01 X-80.91191 Y75.36652
G01 X-80.99050 Y75.33399
G01 X-82.19581 Y75.33399
G01 X-82.27445 Y75.30142
G01 X-82.42141 Y75.22286
G01 X-82.50127 Y75.16950
G01 X-82.59939 Y75.08898
G01 X-82.63007 Y75.06378
G01 X-82.69799 Y74.99586
G01 X-82.80371 Y74.86706
G01 X-82.85707 Y74.78720
G01 X-82.93563 Y74.64024
G01 X-82.97239 Y74.55149
G01 X-83.02075 Y74.39203
G01 X-83.03949 Y74.29782
G01 X-83.05583 Y74.13201
G01 X-83.05583 Y74.03595
G01 X-83.03949 Y73.87011
G01 X-83.02075 Y73.77590
G01 X-82.97239 Y73.61646
G01 X-82.93563 Y73.52772
G01 X-82.85707 Y73.38075
G01 X-82.80371 Y73.30090
G01 X-82.69799 Y73.17209
G01 X-82.63007 Y73.10415
G01 X-82.50127 Y72.99846
G01 X-82.42141 Y72.94509
G01 X-82.30935 Y72.88522
G01 X-82.26439 Y72.88522
G01 X-82.17945 Y72.88878
G01 X-82.16754 Y72.88980
G01 X-82.09266 Y72.89305
G01 X-81.99243 Y72.89302
G01 X-81.91885 Y72.89660
G01 X-81.88974 Y72.89947
G01 X-81.82156 Y72.90283
G01 X-81.75077 Y72.90283
G01 X-81.71819 Y72.90364
G01 X-81.62515 Y72.90821
G01 X-81.59317 Y72.90900
G01 X-81.46820 Y72.90900
G01 X-81.43625 Y72.90979
G01 X-81.26962 Y72.91796
G01 X-81.20348 Y72.92449
G01 X-81.03686 Y72.94923
G01 X-80.98405 Y72.95901
G01 X-77.03133 Y72.95901
G01 X-76.92241 Y72.97517
G01 X-76.85279 Y72.98205
G01 X-76.65678 Y72.99168
G01 X-76.58962 Y72.99168
G01 X-76.39356 Y72.98205
G01 X-76.32394 Y72.97517
G01 X-76.12790 Y72.94608
G01 X-76.05033 Y72.93061
G01 X-75.86321 Y72.88375
G01 X-73.56822 Y72.88375
G01 X-73.51975 Y72.88246
G01 X-73.49323 Y72.88103
G01 X-73.34022 Y72.85982
G01 X-73.31678 Y72.84283
G01 X-73.26029 Y72.80054
G01 X-73.16215 Y72.71555
G01 X-69.43734 Y68.99074
G01 X-69.42641 Y68.97967
G01 X-69.42027 Y68.97329
G01 X-69.32664 Y68.85910
G01 X-69.28613 Y68.80078
G01 X-69.26924 Y68.76641
G01 X-68.55296 Y68.05018
G01 X-68.11839 Y67.87017
G01 X-67.80838 Y67.56019
G01 X-67.62835 Y67.12555
G01 X-59.12260 Y58.61975
G01 X-61.12143 Y56.62089
G01 X-61.15374 Y56.58528
G01 X-61.27809 Y56.43375
G01 X-61.33146 Y56.35386
G01 X-61.42387 Y56.18099
G01 X-61.46062 Y56.09224
G01 X-61.51754 Y55.90464
G01 X-61.53629 Y55.81043
G01 X-61.55549 Y55.61533
G01 X-61.55785 Y55.56730
G01 X-61.55785 Y50.79317
G01 X-61.55788 Y48.79302
G01 X-61.55785 Y47.27095
G01 X-61.55549 Y47.22294
G01 X-61.53629 Y47.02785
G01 X-61.51754 Y46.93364
G01 X-61.46062 Y46.74603
G01 X-61.42387 Y46.65729
G01 X-61.33146 Y46.48441
G01 X-61.27809 Y46.40453
G01 X-61.15374 Y46.25299
G01 X-61.12143 Y46.21738
G01 X-60.74218 Y45.83811
G01 X-60.74218 Y44.40098
G01 X-60.58655 Y44.19349
G01 X-60.51968 Y43.92597
G01 X-60.51968 Y42.22598
G01 X-60.58219 Y41.96738
G01 X-60.74218 Y41.74670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.47718 Y41.62864 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.47718 Y41.62864
G01 X-62.47718 Y41.73598
G01 X-62.48719 Y41.73598
G01 X-62.54939 Y41.74203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.95289 Y42.08132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.95289 Y42.08132
G01 X-62.95592 Y42.08541
G01 X-63.03085 Y42.12725
G01 X-63.11929 Y42.15646
G01 X-63.21162 Y42.16839
G01 X-63.28147 Y42.17073
G01 X-63.37415 Y42.16504
G01 X-63.46410 Y42.14195
G01 X-63.52914 Y42.11124
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.26615 Y32.91845 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.26615 Y32.91845
G01 X-63.26615 Y29.69616
G01 X-63.28454 Y29.75734
G01 X-63.31121 Y29.79887
G01 X-63.37553 Y29.86631
G01 X-63.42833 Y29.91206
G01 X-63.50423 Y29.96608
G01 X-63.58896 Y30.00477
G01 X-63.67951 Y30.02671
G01 X-63.74865 Y30.03664
G01 X-63.85645 Y30.03888
G01 X-63.88919 Y30.02488
G01 X-63.88921 Y30.02488
G01 X-63.97499 Y29.98826
G01 X-63.98909 Y29.98026
G01 X-64.01908 Y29.96397
G01 X-64.06867 Y29.93822
G01 X-64.09998 Y29.92115
G01 X-64.18665 Y29.87170
G01 X-64.27131 Y29.83078
G01 X-64.35231 Y29.79638
G01 X-64.38909 Y29.78285
G01 X-64.57222 Y29.72943
G01 X-64.60166 Y29.72138
G01 X-64.65916 Y29.71272
G01 X-64.82114 Y29.69362
G01 X-64.88743 Y29.69037
G01 X-64.97590 Y29.69037
G01 X-65.04220 Y29.69362
G01 X-65.20417 Y29.71272
G01 X-65.26170 Y29.72138
G01 X-65.29114 Y29.72943
G01 X-65.47425 Y29.78285
G01 X-65.51057 Y29.79621
G01 X-65.59208 Y29.83078
G01 X-65.67671 Y29.87170
G01 X-65.79437 Y29.93885
G01 X-65.86673 Y29.98485
G01 X-66.03808 Y30.12486
G01 X-66.04611 Y30.13238
G01 X-66.10768 Y30.19608
G01 X-66.18781 Y30.28760
G01 X-66.25317 Y30.37340
G01 X-66.30326 Y30.44635
G01 X-66.31631 Y30.46750
G01 X-66.41159 Y30.64848
G01 X-66.41923 Y30.66339
G01 X-66.44445 Y30.73080
G01 X-66.49111 Y30.87258
G01 X-66.51095 Y30.95033
G01 X-66.52858 Y31.03702
G01 X-66.53650 Y31.08891
G01 X-66.55121 Y31.26524
G01 X-66.55380 Y31.30954
G01 X-66.55121 Y31.35381
G01 X-66.54227 Y31.46087
G01 X-66.54031 Y31.58317
G01 X-66.54075 Y31.59196
G01 X-66.54166 Y31.66331
G01 X-66.54115 Y31.68597
G01 X-66.64575 Y31.83313
G01 X-66.66869 Y31.85958
G01 X-66.71220 Y31.90629
G01 X-67.59698 Y32.79107
G01 X-67.69507 Y32.87601
G01 X-67.75159 Y32.91835
G01 X-67.77508 Y32.93537
G01 X-67.92848 Y32.95658
G01 X-67.95497 Y32.95800
G01 X-68.00305 Y32.95929
G01 X-73.25933 Y32.95929
G01 X-73.38884 Y32.94997
G01 X-73.45869 Y32.93991
G01 X-73.53527 Y32.92574
G01 X-73.59981 Y32.86481
G01 X-73.62156 Y32.84362
G01 X-73.64327 Y32.82173
G01 X-73.68224 Y32.77997
G01 X-73.75572 Y32.69605
G01 X-73.79631 Y32.65269
G01 X-73.81724 Y32.63240
G01 X-73.82531 Y32.62483
G01 X-73.86166 Y32.59513
G01 X-73.99661 Y32.48485
G01 X-74.06903 Y32.43885
G01 X-74.18665 Y32.37169
G01 X-74.27129 Y32.33077
G01 X-74.35274 Y32.29623
G01 X-74.38909 Y32.28287
G01 X-74.57220 Y32.22945
G01 X-74.60164 Y32.22140
G01 X-74.65917 Y32.21271
G01 X-74.81802 Y32.19399
G01 X-74.82122 Y32.19361
G01 X-74.88744 Y32.19036
G01 X-74.97591 Y32.19036
G01 X-75.04220 Y32.19361
G01 X-75.09150 Y32.19943
G01 X-75.20486 Y32.20565
G01 X-75.22160 Y32.20552
G01 X-75.29260 Y32.20771
G01 X-75.29765 Y32.20804
G01 X-75.34721 Y32.21012
G01 X-75.34756 Y32.21015
G01 X-75.48457 Y32.11462
G01 X-75.51784 Y32.08673
G01 X-75.57624 Y32.03324
G01 X-76.40235 Y31.20713
G01 X-76.43435 Y31.17665
G01 X-76.44819 Y31.16410
G01 X-76.48774 Y31.13354
G01 X-76.54957 Y31.08980
G01 X-76.56094 Y31.08376
G01 X-76.62178 Y31.05201
G01 X-76.66148 Y31.03253
G01 X-76.70341 Y31.01820
G01 X-76.76887 Y30.99765
G01 X-76.78124 Y30.99387
G01 X-76.81865 Y30.98665
G01 X-76.85571 Y30.98112
G01 X-76.90539 Y30.97474
G01 X-76.92396 Y30.97383
G01 X-76.96821 Y30.97273
G01 X-81.83020 Y30.97273
G01 X-81.87447 Y30.97383
G01 X-81.89301 Y30.97474
G01 X-81.94270 Y30.98112
G01 X-82.01712 Y30.99384
G01 X-82.02951 Y30.99765
G01 X-82.09497 Y31.01820
G01 X-82.13690 Y31.03253
G01 X-82.17661 Y31.05201
G01 X-82.23744 Y31.08376
G01 X-82.24882 Y31.08980
G01 X-82.31064 Y31.13354
G01 X-82.35019 Y31.16410
G01 X-82.36403 Y31.17665
G01 X-82.39604 Y31.20713
G01 X-83.69553 Y32.50664
G01 X-83.72601 Y32.53865
G01 X-83.73853 Y32.55246
G01 X-83.76911 Y32.59204
G01 X-83.81285 Y32.65383
G01 X-83.81889 Y32.66524
G01 X-83.85064 Y32.72605
G01 X-83.87015 Y32.76577
G01 X-83.88445 Y32.80771
G01 X-83.90502 Y32.87316
G01 X-83.90876 Y32.88541
G01 X-83.91602 Y32.92310
G01 X-83.92153 Y32.95998
G01 X-83.92791 Y33.00966
G01 X-83.92882 Y33.02820
G01 X-83.92992 Y33.07250
G01 X-83.92992 Y33.07613
G01 X-83.93921 Y33.20557
G01 X-83.94927 Y33.27545
G01 X-83.96967 Y33.34342
G01 X-83.96967 Y33.86407
G01 X-84.00622 Y33.89404
G01 X-84.07414 Y33.96198
G01 X-84.17363 Y34.08319
G01 X-84.22699 Y34.16308
G01 X-84.30093 Y34.30138
G01 X-84.33769 Y34.39013
G01 X-84.34023 Y34.39853
G01 X-84.37967 Y34.39853
G01 X-84.37967 Y34.03851
G01 X-84.38110 Y34.02411
G01 X-84.38910 Y33.94291
G01 X-84.41699 Y33.85099
G01 X-84.46227 Y33.76628
G01 X-84.52321 Y33.69203
G01 X-84.52778 Y33.68827
G01 X-84.53022 Y33.68723
G01 X-84.63408 Y33.64423
G01 X-84.65664 Y33.63539
G01 X-84.66271 Y33.63303
G01 X-84.66304 Y33.63293
G01 X-84.80490 Y33.59137
G01 X-84.82443 Y33.58942
G01 X-84.86969 Y33.58827
G01 X-86.46966 Y33.58827
G01 X-86.51493 Y33.58942
G01 X-86.53446 Y33.59137
G01 X-86.59646 Y33.60644
G01 X-86.72432 Y33.64233
G01 X-86.77566 Y33.65878
G01 X-86.81617 Y33.69203
G01 X-86.87710 Y33.76628
G01 X-86.92239 Y33.85099
G01 X-86.95028 Y33.94291
G01 X-86.95224 Y33.96331
G01 X-86.93987 Y34.03854
G01 X-86.93474 Y34.07402
G01 X-86.92701 Y34.13537
G01 X-86.91993 Y34.24845
G01 X-86.91993 Y36.43854
G01 X-86.91879 Y36.48377
G01 X-86.91683 Y36.50331
G01 X-86.89118 Y36.60031
G01 X-86.85328 Y36.67572
G01 X-86.84833 Y36.68441
G01 X-86.81383 Y36.72891
G01 X-86.76781 Y36.78042
G01 X-86.69173 Y36.85568
G01 X-86.65704 Y36.88842
G01 X-86.65076 Y36.91293
G01 X-86.62262 Y37.09535
G01 X-86.62120 Y37.12182
G01 X-86.61993 Y37.16990
G01 X-86.61993 Y37.39401
G01 X-86.62925 Y37.52352
G01 X-86.63928 Y37.59337
G01 X-86.64386 Y37.62200
G01 X-86.73712 Y37.74524
G01 X-86.75488 Y37.76500
G01 X-86.78810 Y37.80008
G01 X-87.21066 Y38.22261
G01 X-87.30888 Y38.30765
G01 X-87.36539 Y38.34996
G01 X-87.44660 Y38.40452
G01 X-87.62445 Y38.41476
G01 X-87.69430 Y38.41224
G01 X-87.76806 Y38.40297
G01 X-87.87908 Y38.40297
G01 X-87.89087 Y38.36406
G01 X-87.89255 Y38.36215
G01 X-87.91779 Y38.33378
G01 X-87.94088 Y38.30874
G01 X-87.97238 Y38.27678
G01 X-88.00113 Y38.24788
G01 X-88.03042 Y38.22060
G01 X-88.10024 Y38.16436
G01 X-88.14093 Y38.14224
G01 X-88.18439 Y38.12149
G01 X-88.28139 Y38.09583
G01 X-88.30093 Y38.09388
G01 X-88.34619 Y38.09274
G01 X-90.04619 Y38.09274
G01 X-90.09142 Y38.09388
G01 X-90.11096 Y38.09583
G01 X-90.20796 Y38.12149
G01 X-90.29208 Y38.16436
G01 X-90.35784 Y38.21699
G01 X-90.45845 Y38.30554
G01 X-90.48629 Y38.33190
G01 X-90.48759 Y38.33312
G01 X-90.51743 Y38.34557
G01 X-90.60646 Y38.37313
G01 X-90.69907 Y38.38331
G01 X-90.79196 Y38.37579
G01 X-90.86076 Y38.36355
G01 X-90.95055 Y38.33856
G01 X-91.03399 Y38.29703
G01 X-91.10806 Y38.24044
G01 X-91.15929 Y38.19294
G01 X-91.21961 Y38.12565
G01 X-91.23691 Y38.09721
G01 X-91.27674 Y37.95794
G01 X-91.28565 Y37.89203
G01 X-91.29394 Y37.77008
G01 X-91.29394 Y33.00821
G01 X-91.28461 Y32.87875
G01 X-91.27456 Y32.80888
G01 X-91.25418 Y32.72165
G01 X-91.25418 Y32.56984
G01 X-91.26650 Y32.52003
G01 X-91.27910 Y32.45018
G01 X-91.29360 Y32.30446
G01 X-91.29376 Y32.29559
G01 X-91.29394 Y32.27883
G01 X-91.29394 Y29.35999
G01 X-91.29500 Y29.31574
G01 X-91.29640 Y29.28719
G01 X-91.29640 Y29.28366
G01 X-91.29741 Y29.26380
G01 X-91.29820 Y29.24434
G01 X-91.29891 Y29.20843
G01 X-91.29891 Y29.01800
G01 X-91.28959 Y28.88854
G01 X-91.27956 Y28.81866
G01 X-91.25916 Y28.74912
G01 X-91.24245 Y28.69209
G01 X-91.21413 Y28.64805
G01 X-91.14984 Y28.58061
G01 X-91.09703 Y28.53487
G01 X-91.04250 Y28.49509
G01 X-90.99437 Y28.48351
G01 X-90.87417 Y28.45466
G01 X-90.82147 Y28.44899
G01 X-90.72470 Y28.44378
G01 X-89.92871 Y28.44378
G01 X-89.79922 Y28.45311
G01 X-89.72937 Y28.46314
G01 X-89.69511 Y28.46870
G01 X-89.65066 Y28.50248
G01 X-89.58434 Y28.55598
G01 X-89.58048 Y28.55907
G01 X-89.56722 Y28.56964
G01 X-89.53651 Y28.59530
G01 X-89.50715 Y28.62090
G01 X-89.45835 Y28.65745
G01 X-89.38505 Y28.70693
G01 X-89.35289 Y28.72641
G01 X-89.24649 Y28.78044
G01 X-89.18500 Y28.80881
G01 X-89.16501 Y28.81518
G01 X-89.01502 Y28.86106
G01 X-89.00618 Y28.86372
G01 X-88.92793 Y28.87696
G01 X-88.91865 Y28.87812
G01 X-88.82112 Y28.89027
G01 X-88.77192 Y28.89268
G01 X-88.68345 Y28.89268
G01 X-88.63423 Y28.89027
G01 X-88.52742 Y28.87698
G01 X-88.51050 Y28.87470
G01 X-88.44921 Y28.86372
G01 X-88.44030 Y28.86103
G01 X-88.29033 Y28.81518
G01 X-88.27034 Y28.80881
G01 X-88.20890 Y28.78044
G01 X-88.10248 Y28.72641
G01 X-88.07035 Y28.70693
G01 X-87.99702 Y28.65745
G01 X-87.94817 Y28.62087
G01 X-87.91896 Y28.59537
G01 X-87.87477 Y28.55918
G01 X-87.81660 Y28.51455
G01 X-87.80293 Y28.50385
G01 X-87.76067 Y28.47015
G01 X-87.75986 Y28.46951
G01 X-87.58828 Y28.44564
G01 X-87.56638 Y28.44467
G01 X-87.52661 Y28.44378
G01 X-87.19938 Y28.44378
G01 X-87.06986 Y28.45311
G01 X-87.00001 Y28.46314
G01 X-86.90342 Y28.48351
G01 X-86.89857 Y28.48455
G01 X-86.86207 Y28.50678
G01 X-86.86024 Y28.50901
G01 X-86.82795 Y28.54869
G01 X-86.79491 Y28.59169
G01 X-86.76031 Y28.63949
G01 X-86.73476 Y28.67670
G01 X-86.71302 Y28.71010
G01 X-86.68366 Y28.74922
G01 X-86.60946 Y28.84272
G01 X-86.58424 Y28.87053
G01 X-86.52168 Y28.93309
G01 X-86.49384 Y28.95831
G01 X-86.40037 Y29.03251
G01 X-86.36501 Y29.05918
G01 X-86.32686 Y29.08163
G01 X-86.22252 Y29.13964
G01 X-86.18861 Y29.15567
G01 X-86.10680 Y29.18955
G01 X-86.07149 Y29.20218
G01 X-85.95668 Y29.23497
G01 X-85.91383 Y29.24607
G01 X-85.86994 Y29.25222
G01 X-85.75143 Y29.26585
G01 X-85.71391 Y29.26768
G01 X-85.62544 Y29.26768
G01 X-85.58793 Y29.26585
G01 X-85.46939 Y29.25222
G01 X-85.42549 Y29.24607
G01 X-85.38262 Y29.23494
G01 X-85.26789 Y29.20220
G01 X-85.23253 Y29.18955
G01 X-85.15074 Y29.15567
G01 X-85.11683 Y29.13962
G01 X-85.01249 Y29.08163
G01 X-84.97429 Y29.05915
G01 X-84.93898 Y29.03251
G01 X-84.84551 Y28.95834
G01 X-84.81767 Y28.93312
G01 X-84.80611 Y28.92245
G01 X-84.75283 Y28.87241
G01 X-84.70949 Y28.83421
G01 X-84.65468 Y28.78882
G01 X-84.63080 Y28.76967
G01 X-84.61643 Y28.75852
G01 X-84.57523 Y28.74086
G01 X-84.48425 Y28.72108
G01 X-84.39113 Y28.71884
G01 X-84.32143 Y28.72382
G01 X-84.24086 Y28.73639
G01 X-84.18707 Y28.75427
G01 X-84.18633 Y28.75481
G01 X-84.16758 Y28.76888
G01 X-84.10439 Y28.82049
G01 X-84.06451 Y28.85598
G01 X-84.04653 Y28.87241
G01 X-83.99329 Y28.92237
G01 X-83.98168 Y28.93309
G01 X-83.95387 Y28.95831
G01 X-83.86037 Y29.03251
G01 X-83.82501 Y29.05918
G01 X-83.78686 Y29.08163
G01 X-83.68252 Y29.13964
G01 X-83.64861 Y29.15567
G01 X-83.56680 Y29.18955
G01 X-83.53149 Y29.20218
G01 X-83.41668 Y29.23497
G01 X-83.37383 Y29.24607
G01 X-83.32994 Y29.25222
G01 X-83.21143 Y29.26585
G01 X-83.17391 Y29.26768
G01 X-83.08544 Y29.26768
G01 X-83.04793 Y29.26585
G01 X-82.92939 Y29.25222
G01 X-82.88549 Y29.24607
G01 X-82.84262 Y29.23494
G01 X-82.72789 Y29.20220
G01 X-82.69253 Y29.18955
G01 X-82.61074 Y29.15567
G01 X-82.57683 Y29.13962
G01 X-82.47249 Y29.08163
G01 X-82.43429 Y29.05915
G01 X-82.39898 Y29.03251
G01 X-82.30551 Y28.95834
G01 X-82.27767 Y28.93312
G01 X-82.26611 Y28.92245
G01 X-82.21283 Y28.87241
G01 X-82.16949 Y28.83421
G01 X-82.11468 Y28.78882
G01 X-82.09080 Y28.76967
G01 X-82.07643 Y28.75852
G01 X-82.03523 Y28.74086
G01 X-81.94425 Y28.72108
G01 X-81.85113 Y28.71884
G01 X-81.78143 Y28.72382
G01 X-81.70086 Y28.73639
G01 X-81.64707 Y28.75427
G01 X-81.64633 Y28.75481
G01 X-81.62758 Y28.76888
G01 X-81.56439 Y28.82049
G01 X-81.52451 Y28.85598
G01 X-81.50653 Y28.87241
G01 X-81.45329 Y28.92237
G01 X-81.44168 Y28.93309
G01 X-81.41387 Y28.95831
G01 X-81.32037 Y29.03251
G01 X-81.28501 Y29.05918
G01 X-81.24686 Y29.08163
G01 X-81.14252 Y29.13964
G01 X-81.10861 Y29.15567
G01 X-81.02680 Y29.18955
G01 X-80.99149 Y29.20218
G01 X-80.87668 Y29.23497
G01 X-80.83383 Y29.24607
G01 X-80.78994 Y29.25222
G01 X-80.67143 Y29.26585
G01 X-80.63391 Y29.26768
G01 X-80.54544 Y29.26768
G01 X-80.50793 Y29.26585
G01 X-80.38939 Y29.25222
G01 X-80.34549 Y29.24607
G01 X-80.30262 Y29.23494
G01 X-80.18789 Y29.20220
G01 X-80.15253 Y29.18955
G01 X-80.07074 Y29.15567
G01 X-80.03683 Y29.13962
G01 X-79.93249 Y29.08163
G01 X-79.89429 Y29.05915
G01 X-79.85898 Y29.03251
G01 X-79.76551 Y28.95834
G01 X-79.73767 Y28.93312
G01 X-79.72611 Y28.92245
G01 X-79.67283 Y28.87241
G01 X-79.62949 Y28.83421
G01 X-79.57468 Y28.78882
G01 X-79.55080 Y28.76967
G01 X-79.53643 Y28.75852
G01 X-79.49523 Y28.74086
G01 X-79.40425 Y28.72108
G01 X-79.31113 Y28.71884
G01 X-79.24143 Y28.72382
G01 X-79.16086 Y28.73639
G01 X-79.10707 Y28.75427
G01 X-79.10633 Y28.75481
G01 X-79.08758 Y28.76888
G01 X-79.02439 Y28.82049
G01 X-78.98451 Y28.85598
G01 X-78.96653 Y28.87241
G01 X-78.91329 Y28.92237
G01 X-78.90168 Y28.93309
G01 X-78.87387 Y28.95831
G01 X-78.78037 Y29.03251
G01 X-78.74501 Y29.05918
G01 X-78.70686 Y29.08163
G01 X-78.60252 Y29.13964
G01 X-78.56861 Y29.15567
G01 X-78.48680 Y29.18955
G01 X-78.45149 Y29.20218
G01 X-78.33668 Y29.23497
G01 X-78.29383 Y29.24607
G01 X-78.24994 Y29.25222
G01 X-78.13143 Y29.26585
G01 X-78.09391 Y29.26768
G01 X-78.00544 Y29.26768
G01 X-77.96790 Y29.26585
G01 X-77.86287 Y29.25376
G01 X-77.84936 Y29.25232
G01 X-77.76005 Y29.24340
G01 X-77.73211 Y29.24104
G01 X-77.66064 Y29.23604
G01 X-77.63496 Y29.23471
G01 X-77.62696 Y29.23431
G01 X-77.62302 Y29.23311
G01 X-77.61934 Y29.23682
G01 X-77.61398 Y29.24048
G01 X-77.61393 Y29.24051
G01 X-77.47186 Y29.33804
G01 X-77.43915 Y29.36552
G01 X-77.42594 Y29.37685
G01 X-77.39259 Y29.40599
G01 X-77.38035 Y29.41688
G01 X-77.37872 Y29.41838
G01 X-77.33912 Y29.44899
G01 X-77.27728 Y29.49273
G01 X-77.26592 Y29.49877
G01 X-77.20509 Y29.53050
G01 X-77.16539 Y29.55000
G01 X-77.12345 Y29.56433
G01 X-77.05800 Y29.58488
G01 X-77.04573 Y29.58864
G01 X-76.97118 Y29.60141
G01 X-76.92152 Y29.60779
G01 X-76.90296 Y29.60870
G01 X-76.85868 Y29.60977
G01 X-76.64761 Y29.60977
G01 X-76.51815 Y29.61909
G01 X-76.44827 Y29.62913
G01 X-76.35691 Y29.64680
G01 X-76.32216 Y29.68280
G01 X-76.26260 Y29.74774
G01 X-76.25960 Y29.75100
G01 X-76.23031 Y29.78262
G01 X-76.19262 Y29.82598
G01 X-76.10763 Y29.92300
G01 X-76.04611 Y29.98666
G01 X-76.03809 Y29.99420
G01 X-75.86897 Y30.13238
G01 X-75.86679 Y30.13418
G01 X-75.79432 Y30.18020
G01 X-75.67669 Y30.24736
G01 X-75.59206 Y30.28828
G01 X-75.51060 Y30.32283
G01 X-75.47426 Y30.33619
G01 X-75.29115 Y30.38960
G01 X-75.26171 Y30.39765
G01 X-75.20418 Y30.40634
G01 X-75.15196 Y30.41249
G01 X-75.04218 Y30.42544
G01 X-74.97591 Y30.42869
G01 X-74.88744 Y30.42869
G01 X-74.82115 Y30.42544
G01 X-74.65917 Y30.40634
G01 X-74.60166 Y30.39768
G01 X-74.57220 Y30.38960
G01 X-74.38909 Y30.33619
G01 X-74.35274 Y30.32283
G01 X-74.27129 Y30.28828
G01 X-74.18665 Y30.24736
G01 X-74.06903 Y30.18020
G01 X-73.99661 Y30.13420
G01 X-73.82526 Y29.99417
G01 X-73.81724 Y29.98666
G01 X-73.75572 Y29.92300
G01 X-73.67556 Y29.83149
G01 X-73.61020 Y29.74569
G01 X-73.56009 Y29.67271
G01 X-73.54703 Y29.65155
G01 X-73.45176 Y29.47053
G01 X-73.44411 Y29.45564
G01 X-73.41889 Y29.38823
G01 X-73.37223 Y29.24647
G01 X-73.35242 Y29.16873
G01 X-73.33476 Y29.08204
G01 X-73.32684 Y29.03009
G01 X-73.31213 Y28.85382
G01 X-73.30954 Y28.80952
G01 X-73.31213 Y28.76527
G01 X-73.32514 Y28.60954
G01 X-73.32829 Y28.53637
G01 X-73.32844 Y28.47782
G01 X-73.32918 Y28.44325
G01 X-73.33062 Y28.40581
G01 X-73.33100 Y28.39397
G01 X-73.22077 Y28.23700
G01 X-73.19781 Y28.21056
G01 X-73.15447 Y28.16405
G01 X-72.66781 Y27.67739
G01 X-72.63733 Y27.64539
G01 X-72.62486 Y27.63162
G01 X-72.59423 Y27.59200
G01 X-72.55049 Y27.53017
G01 X-72.54444 Y27.51879
G01 X-72.51269 Y27.45796
G01 X-72.49319 Y27.41823
G01 X-72.47889 Y27.37632
G01 X-72.46492 Y27.33185
G01 X-72.45834 Y27.31087
G01 X-72.45458 Y27.29862
G01 X-72.44180 Y27.22403
G01 X-72.43543 Y27.17432
G01 X-72.43451 Y27.15578
G01 X-72.43342 Y27.11150
G01 X-72.43342 Y25.27348
G01 X-72.42412 Y25.14404
G01 X-72.41406 Y25.07417
G01 X-72.40408 Y25.01707
G01 X-72.37088 Y24.97534
G01 X-72.31193 Y24.90534
G01 X-72.26715 Y24.85588
G01 X-72.21826 Y24.80564
G01 X-72.20385 Y24.79119
G01 X-72.14729 Y24.73554
G01 X-72.00866 Y24.71011
G01 X-71.95595 Y24.70445
G01 X-71.85918 Y24.69924
G01 X-71.62476 Y24.69924
G01 X-71.49524 Y24.70856
G01 X-71.42539 Y24.71859
G01 X-71.33964 Y24.73897
G01 X-71.31653 Y24.74448
G01 X-71.26042 Y24.77966
G01 X-71.22603 Y24.81138
G01 X-71.20584 Y24.85062
G01 X-71.17338 Y24.90859
G01 X-71.12230 Y24.99284
G01 X-71.06141 Y25.06825
G01 X-70.98816 Y25.12759
G01 X-70.90513 Y25.16998
G01 X-70.90401 Y25.17046
G01 X-70.88308 Y25.17699
G01 X-70.80696 Y25.19614
G01 X-70.78740 Y25.19810
G01 X-70.74216 Y25.19924
G01 X-69.04216 Y25.19924
G01 X-68.99690 Y25.19810
G01 X-68.97739 Y25.19614
G01 X-68.88039 Y25.17049
G01 X-68.79627 Y25.12764
G01 X-68.72294 Y25.06823
G01 X-68.66353 Y24.99490
G01 X-68.62068 Y24.91077
G01 X-68.58827 Y24.77707
G01 X-68.58677 Y24.76762
G01 X-68.58395 Y24.74897
G01 X-68.55900 Y24.63376
G01 X-68.55497 Y24.61631
G01 X-68.55220 Y24.60935
G01 X-68.54666 Y24.59546
G01 X-68.50218 Y24.52738
G01 X-68.44178 Y24.46358
G01 X-68.37097 Y24.41161
G01 X-68.31118 Y24.37549
G01 X-68.22726 Y24.33513
G01 X-68.13721 Y24.31138
G01 X-68.04430 Y24.30511
G01 X-67.97445 Y24.30704
G01 X-67.88989 Y24.31677
G01 X-67.83742 Y24.34768
G01 X-67.74598 Y24.40158
G01 X-67.70013 Y24.43772
G01 X-67.62014 Y24.50874
G01 X-63.39463 Y28.73426
G01 X-63.30969 Y28.83235
G01 X-63.26737 Y28.88887
G01 X-63.25033 Y28.91239
G01 X-63.22912 Y29.06575
G01 X-63.22770 Y29.09225
G01 X-63.22640 Y29.14033
G01 X-63.22640 Y29.42890
G01 X-63.23572 Y29.55834
G01 X-63.24576 Y29.62821
G01 X-63.26615 Y29.69616
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.88218 Y32.58835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.88218 Y32.58835
G01 X-63.79351 Y32.51561
G01 X-63.72559 Y32.44769
G01 X-63.58010 Y32.27037
G01 X-63.52673 Y32.19051
G01 X-63.41860 Y31.98823
G01 X-63.38185 Y31.89948
G01 X-63.31528 Y31.68000
G01 X-63.29653 Y31.58579
G01 X-63.27405 Y31.35755
G01 X-63.27405 Y31.26148
G01 X-63.29653 Y31.03324
G01 X-63.31528 Y30.93903
G01 X-63.38185 Y30.71952
G01 X-63.41860 Y30.63080
G01 X-63.52673 Y30.42851
G01 X-63.58010 Y30.34863
G01 X-63.72559 Y30.17134
G01 X-63.79351 Y30.10342
G01 X-63.88919 Y30.02488
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.49521 Y21.67974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.49521 Y21.67974
G01 X-60.81818 Y22.35678
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.58699 Y23.58799 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.58699 Y23.58799
G01 X-59.13428 Y24.04069
G01 X-57.42260 Y25.75240
G01 X-57.39029 Y25.78801
G01 X-57.26594 Y25.93955
G01 X-57.21257 Y26.01943
G01 X-57.12017 Y26.19230
G01 X-57.08341 Y26.28105
G01 X-57.02649 Y26.46865
G01 X-57.00775 Y26.56286
G01 X-56.98854 Y26.75796
G01 X-56.98618 Y26.80597
G01 X-56.98613 Y32.49501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.80775 Y31.51177 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.80775 Y31.51177
G01 X-53.86246 Y31.54103
G01 X-53.95121 Y31.57779
G01 X-54.13882 Y31.63471
G01 X-54.23302 Y31.65343
G01 X-54.27275 Y31.65734
G01 X-54.42812 Y31.67266
G01 X-54.52416 Y31.67266
G01 X-54.71926 Y31.65346
G01 X-54.81346 Y31.63471
G01 X-55.00107 Y31.57781
G01 X-55.08982 Y31.54106
G01 X-55.26269 Y31.44865
G01 X-55.34257 Y31.39529
G01 X-55.49411 Y31.27093
G01 X-55.52974 Y31.23862
G01 X-56.21377 Y30.55463
G01 X-56.24605 Y30.51899
G01 X-56.37041 Y30.36745
G01 X-56.42380 Y30.28760
G01 X-56.51620 Y30.11470
G01 X-56.55296 Y30.02595
G01 X-56.60988 Y29.83837
G01 X-56.62860 Y29.74414
G01 X-56.64783 Y29.54904
G01 X-56.65019 Y29.50101
G01 X-56.65019 Y24.45101
G01 X-56.76020 Y24.45101
G01 X-56.85578 Y24.44161
G01 X-56.94770 Y24.41372
G01 X-57.03241 Y24.36843
G01 X-57.10668 Y24.30750
G01 X-57.16761 Y24.23325
G01 X-57.21288 Y24.14852
G01 X-57.24076 Y24.05659
G01 X-57.25019 Y23.96101
G01 X-57.25019 Y20.76102
G01 X-57.24076 Y20.66541
G01 X-57.21288 Y20.57349
G01 X-57.16761 Y20.48878
G01 X-57.10668 Y20.41454
G01 X-57.03241 Y20.35360
G01 X-56.94770 Y20.30832
G01 X-56.85578 Y20.28043
G01 X-56.76020 Y20.27100
G01 X-56.65019 Y20.27100
G01 X-56.65019 Y19.79186
G01 X-56.92857 Y19.51347
G01 X-57.03165 Y19.48221
G01 X-57.12039 Y19.44545
G01 X-57.32786 Y19.33456
G01 X-57.40772 Y19.28119
G01 X-57.58956 Y19.13197
G01 X-57.65750 Y19.06405
G01 X-57.80673 Y18.88221
G01 X-57.86009 Y18.80235
G01 X-57.97099 Y18.59486
G01 X-58.00774 Y18.50611
G01 X-58.07602 Y18.28104
G01 X-58.09476 Y18.18681
G01 X-58.11783 Y17.95269
G01 X-58.11783 Y17.85663
G01 X-58.09476 Y17.62255
G01 X-58.07602 Y17.52831
G01 X-58.00774 Y17.30319
G01 X-57.97099 Y17.21444
G01 X-57.86009 Y17.00700
G01 X-57.80673 Y16.92712
G01 X-57.65750 Y16.74528
G01 X-57.58956 Y16.67736
G01 X-57.40772 Y16.52814
G01 X-57.32786 Y16.47475
G01 X-57.12039 Y16.36387
G01 X-57.03165 Y16.32709
G01 X-56.80653 Y16.25882
G01 X-56.71232 Y16.24007
G01 X-56.47821 Y16.21701
G01 X-56.38217 Y16.21701
G01 X-56.14806 Y16.24007
G01 X-56.05385 Y16.25882
G01 X-55.82873 Y16.32709
G01 X-55.73998 Y16.36387
G01 X-55.53251 Y16.47475
G01 X-55.45266 Y16.52814
G01 X-55.27082 Y16.67736
G01 X-55.20287 Y16.74528
G01 X-55.05365 Y16.92712
G01 X-55.00028 Y17.00700
G01 X-54.88939 Y17.21444
G01 X-54.85263 Y17.30319
G01 X-54.82134 Y17.40637
G01 X-54.10661 Y18.12110
G01 X-54.07432 Y18.15671
G01 X-53.94994 Y18.30824
G01 X-53.89658 Y18.38810
G01 X-53.80417 Y18.56100
G01 X-53.76742 Y18.64975
G01 X-53.71049 Y18.83738
G01 X-53.69175 Y18.93156
G01 X-53.67255 Y19.12666
G01 X-53.67019 Y19.17466
G01 X-53.67019 Y20.27100
G01 X-53.56018 Y20.27100
G01 X-53.46460 Y20.28043
G01 X-53.37267 Y20.30832
G01 X-53.28797 Y20.35360
G01 X-53.21370 Y20.41454
G01 X-53.15276 Y20.48878
G01 X-53.10750 Y20.57349
G01 X-53.07961 Y20.66541
G01 X-53.07019 Y20.76102
G01 X-53.07019 Y23.96101
G01 X-53.07961 Y24.05659
G01 X-53.10750 Y24.14852
G01 X-53.15276 Y24.23325
G01 X-53.21370 Y24.30750
G01 X-53.28797 Y24.36843
G01 X-53.37267 Y24.41372
G01 X-53.45810 Y24.43963
G01 X-53.46460 Y24.44161
G01 X-53.56018 Y24.45101
G01 X-53.67019 Y24.45101
G01 X-53.67019 Y28.88384
G01 X-53.42259 Y29.13141
G01 X-53.39030 Y29.16705
G01 X-53.26594 Y29.31856
G01 X-53.21258 Y29.39844
G01 X-53.12015 Y29.57132
G01 X-53.08339 Y29.66006
G01 X-53.02647 Y29.84767
G01 X-53.00775 Y29.94188
G01 X-52.98853 Y30.13697
G01 X-52.98853 Y30.23301
G01 X-53.00773 Y30.42811
G01 X-53.02647 Y30.52232
G01 X-53.07986 Y30.69841
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.38533 Y28.37523 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.38533 Y28.37523
G01 X-51.34990 Y28.57223
G01 X-51.34885 Y28.57437
G01 X-51.31147 Y28.63340
G01 X-51.25439 Y28.70695
G01 X-51.18446 Y28.76840
G01 X-51.13186 Y28.79923
G01 X-51.13186 Y28.79926
G01 X-51.12381 Y28.80134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.38018 Y32.09293 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.38018 Y32.09293
G01 X-48.38018 Y32.78114
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.32101 Y30.75036 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.32101 Y30.75036
G01 X-52.37042 Y30.68592
G01 X-52.45957 Y30.63720
G01 X-52.52444 Y30.61122
G01 X-52.61388 Y30.58495
G01 X-52.70666 Y30.57609
G01 X-52.79945 Y30.58495
G01 X-52.86805 Y30.59819
G01 X-52.95741 Y30.62445
G01 X-53.04016 Y30.66710
G01 X-53.07969 Y30.69819
G01 X-53.07986 Y30.69841
G01 X-53.07989 Y30.69844
G01 X-53.08804 Y30.70850
G01 X-53.10468 Y30.73377
G01 X-53.14222 Y30.78683
G01 X-53.14595 Y30.79173
G01 X-53.21763 Y30.90134
G01 X-53.24654 Y30.95338
G01 X-53.26904 Y30.99161
G01 X-53.29571 Y31.02696
G01 X-53.38616 Y31.14093
G01 X-53.42015 Y31.17845
G01 X-53.48271 Y31.24101
G01 X-53.52025 Y31.27505
G01 X-53.63419 Y31.36544
G01 X-53.70430 Y31.42115
G01 X-53.70834 Y31.42437
G01 X-53.74903 Y31.45706
G01 X-53.80775 Y31.51177
G01 X-53.81794 Y31.52127
G01 X-53.84771 Y31.58119
G01 X-53.87123 Y31.65828
G01 X-53.88606 Y31.72656
G01 X-53.89708 Y31.81899
G01 X-53.89045 Y31.91187
G01 X-53.86635 Y32.00179
G01 X-53.84194 Y32.06725
G01 X-53.80122 Y32.15107
G01 X-53.74537 Y32.22567
G01 X-53.71618 Y32.25221
G01 X-53.71618 Y32.73519
G01 X-53.79414 Y32.79915
G01 X-53.86206 Y32.86707
G01 X-53.98642 Y33.01860
G01 X-54.03978 Y33.09849
G01 X-54.13219 Y33.27136
G01 X-54.16894 Y33.36011
G01 X-54.22586 Y33.54771
G01 X-54.24461 Y33.64192
G01 X-54.25065 Y33.70339
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.16876 Y35.31796 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.16876 Y35.31796
G01 X-53.16455 Y35.36102
G01 X-53.16219 Y35.40902
G01 X-53.16219 Y35.73658
G01 X-53.18256 Y35.80448
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.14219 Y37.44679 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.14219 Y37.44679
G01 X-56.98618 Y36.60280
G01 X-56.98618 Y35.27501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.79717 Y40.30817 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.79717 Y40.30817
G01 X-60.74218 Y40.36317
G01 X-60.74218 Y41.74670
G01 X-60.74711 Y41.73992
G01 X-60.78719 Y41.73598
G01 X-60.79720 Y41.73598
G01 X-60.79717 Y40.30817
G01 X-61.05137 Y39.69446
G01 X-61.06126 Y39.67218
G01 X-61.09240 Y39.60630
G01 X-61.11134 Y39.57081
G01 X-61.14772 Y39.51013
G01 X-61.16659 Y39.48184
G01 X-61.20791 Y39.42613
G01 X-61.22732 Y39.40246
G01 X-61.27347 Y39.35156
G01 X-61.28361 Y39.34089
G01 X-61.58935 Y39.03518
G01 X-61.59951 Y39.02451
G01 X-61.73131 Y38.87907
G01 X-61.75150 Y38.85446
G01 X-61.86956 Y38.69530
G01 X-61.88066 Y38.67953
G01 X-61.88396 Y38.66045
G01 X-61.91304 Y38.46441
G01 X-61.91617 Y38.43277
G01 X-61.92579 Y38.23673
G01 X-61.92618 Y38.22197
G01 X-61.92618 Y28.57099
G01 X-61.92653 Y28.55626
G01 X-61.92991 Y28.48765
G01 X-61.93291 Y28.45725
G01 X-61.94307 Y28.38862
G01 X-61.94596 Y28.37208
G01 X-61.95559 Y28.35839
G01 X-61.99689 Y28.30269
G01 X-62.01632 Y28.27901
G01 X-62.06245 Y28.22814
G01 X-62.07261 Y28.21747
G01 X-68.26863 Y22.02144
G01 X-68.27930 Y22.01128
G01 X-68.33018 Y21.96516
G01 X-68.35385 Y21.94573
G01 X-68.40955 Y21.90443
G01 X-68.43785 Y21.88553
G01 X-68.49853 Y21.84918
G01 X-68.53404 Y21.83023
G01 X-68.59992 Y21.79907
G01 X-68.62220 Y21.78921
G01 X-68.64615 Y21.77928
G01 X-68.65906 Y21.77606
G01 X-68.70937 Y21.76074
G01 X-68.90541 Y21.69058
G01 X-68.93884 Y21.67768
G01 X-69.28336 Y21.53498
G01 X-70.29624 Y21.53498
G01 X-70.33238 Y21.54728
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.28336 Y21.53498 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.28336 Y21.53498
G01 X-70.00675 Y20.81157
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.52017 Y17.08381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.52017 Y17.08381
G01 X-69.52017 Y7.49503
G01 X-69.57302 Y7.43062
G01 X-69.62639 Y7.35076
G01 X-69.75575 Y7.10872
G01 X-69.79253 Y7.01998
G01 X-69.87218 Y6.75734
G01 X-69.89093 Y6.66313
G01 X-69.91783 Y6.39001
G01 X-69.92019 Y6.34197
G01 X-69.92019 Y5.64198
G01 X-69.91783 Y5.59394
G01 X-69.89093 Y5.32082
G01 X-69.87218 Y5.22661
G01 X-69.79253 Y4.96397
G01 X-69.75575 Y4.87523
G01 X-69.62639 Y4.63319
G01 X-69.57302 Y4.55333
G01 X-69.47338 Y4.43200
G01 X-69.35596 Y4.37645
G01 X-69.27417 Y4.34249
G01 X-68.99972 Y4.24429
G01 X-68.94221 Y4.22679
G01 X-68.66777 Y4.15803
G01 X-68.62621 Y4.14975
G01 X-68.35177 Y4.10906
G01 X-68.31936 Y4.10586
G01 X-68.04491 Y4.09237
G01 X-68.01542 Y4.09237
G01 X-67.74097 Y4.10586
G01 X-67.70856 Y4.10906
G01 X-67.43414 Y4.14975
G01 X-67.39259 Y4.15803
G01 X-67.11811 Y4.22679
G01 X-67.06061 Y4.24429
G01 X-66.78616 Y4.34249
G01 X-66.70442 Y4.37645
G01 X-66.58690 Y4.43202
G01 X-66.52949 Y4.50197
G01 X-66.03087 Y4.50197
G01 X-65.97339 Y4.43200
G01 X-65.85596 Y4.37645
G01 X-65.77417 Y4.34249
G01 X-65.49973 Y4.24429
G01 X-65.44222 Y4.22679
G01 X-65.16777 Y4.15803
G01 X-65.12622 Y4.14975
G01 X-64.85177 Y4.10906
G01 X-64.81936 Y4.10586
G01 X-64.54492 Y4.09237
G01 X-64.51543 Y4.09237
G01 X-64.24098 Y4.10586
G01 X-64.20857 Y4.10906
G01 X-63.93412 Y4.14975
G01 X-63.89257 Y4.15803
G01 X-63.61812 Y4.22679
G01 X-63.56062 Y4.24429
G01 X-63.28617 Y4.34249
G01 X-63.20443 Y4.37645
G01 X-63.08691 Y4.43202
G01 X-63.02950 Y4.50197
G01 X-62.53087 Y4.50197
G01 X-62.47339 Y4.43200
G01 X-62.35592 Y4.37645
G01 X-62.27418 Y4.34249
G01 X-61.99973 Y4.24429
G01 X-61.94223 Y4.22679
G01 X-61.66778 Y4.15803
G01 X-61.62623 Y4.14975
G01 X-61.35178 Y4.10906
G01 X-61.31937 Y4.10586
G01 X-61.04492 Y4.09237
G01 X-61.01543 Y4.09237
G01 X-60.74099 Y4.10586
G01 X-60.70858 Y4.10906
G01 X-60.43413 Y4.14975
G01 X-60.39257 Y4.15803
G01 X-60.11813 Y4.22679
G01 X-60.06062 Y4.24429
G01 X-59.78618 Y4.34249
G01 X-59.70439 Y4.37645
G01 X-59.58691 Y4.43202
G01 X-59.52951 Y4.50197
G01 X-59.03088 Y4.50197
G01 X-58.97340 Y4.43200
G01 X-58.85593 Y4.37645
G01 X-58.77419 Y4.34249
G01 X-58.49974 Y4.24429
G01 X-58.44224 Y4.22679
G01 X-58.16776 Y4.15803
G01 X-58.12621 Y4.14975
G01 X-57.85179 Y4.10906
G01 X-57.81938 Y4.10586
G01 X-57.54493 Y4.09237
G01 X-57.51544 Y4.09237
G01 X-57.24099 Y4.10586
G01 X-57.20858 Y4.10906
G01 X-56.93414 Y4.14975
G01 X-56.89258 Y4.15803
G01 X-56.61813 Y4.22679
G01 X-56.56063 Y4.24429
G01 X-56.28618 Y4.34249
G01 X-56.20439 Y4.37645
G01 X-56.08689 Y4.43202
G01 X-55.98735 Y4.55333
G01 X-55.93399 Y4.63319
G01 X-55.80462 Y4.87523
G01 X-55.76784 Y4.96397
G01 X-55.68819 Y5.22661
G01 X-55.66944 Y5.32082
G01 X-55.64255 Y5.59394
G01 X-55.64018 Y5.64198
G01 X-55.64018 Y6.34197
G01 X-55.64255 Y6.39001
G01 X-55.66944 Y6.66313
G01 X-55.68819 Y6.75734
G01 X-55.76784 Y7.01998
G01 X-55.80462 Y7.10872
G01 X-55.93399 Y7.35076
G01 X-55.98735 Y7.43062
G01 X-56.16147 Y7.64278
G01 X-56.22939 Y7.71070
G01 X-56.44153 Y7.88480
G01 X-56.52141 Y7.93819
G01 X-56.76345 Y8.06755
G01 X-56.85220 Y8.10430
G01 X-57.10193 Y8.18004
G01 X-57.10195 Y8.18007
G01 X-57.11651 Y8.17850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.88570 Y9.19246 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.88570 Y9.19246
G01 X-56.85453 Y9.17367
G01 X-56.85352 Y9.17306
G01 X-56.80653 Y9.15881
G01 X-56.71232 Y9.14006
G01 X-56.47821 Y9.11703
G01 X-56.38217 Y9.11703
G01 X-56.36213 Y9.11898
G01 X-56.14806 Y9.14006
G01 X-56.05385 Y9.15881
G01 X-55.82873 Y9.22711
G01 X-55.73998 Y9.26386
G01 X-55.64493 Y9.31466
G01 X-44.51417 Y9.31466
G01 X-44.51417 Y7.49503
G01 X-44.52489 Y7.48198
G01 X-45.02349 Y7.48198
G01 X-45.15547 Y7.64278
G01 X-45.22339 Y7.71070
G01 X-45.43553 Y7.88480
G01 X-45.51541 Y7.93819
G01 X-45.75745 Y8.06755
G01 X-45.84620 Y8.10430
G01 X-46.10883 Y8.18398
G01 X-46.20304 Y8.20273
G01 X-46.47617 Y8.22963
G01 X-46.57221 Y8.22963
G01 X-46.84533 Y8.20273
G01 X-46.93954 Y8.18398
G01 X-47.20218 Y8.10430
G01 X-47.29092 Y8.06755
G01 X-47.53296 Y7.93819
G01 X-47.61284 Y7.88480
G01 X-47.82498 Y7.71070
G01 X-47.89290 Y7.64278
G01 X-48.02488 Y7.48198
G01 X-48.52348 Y7.48198
G01 X-48.65546 Y7.64278
G01 X-48.72338 Y7.71070
G01 X-48.93552 Y7.88480
G01 X-49.01541 Y7.93819
G01 X-49.25744 Y8.06755
G01 X-49.34619 Y8.10430
G01 X-49.60883 Y8.18398
G01 X-49.70304 Y8.20273
G01 X-49.97616 Y8.22963
G01 X-50.07222 Y8.22963
G01 X-50.34535 Y8.20273
G01 X-50.43956 Y8.18398
G01 X-50.70220 Y8.10430
G01 X-50.79092 Y8.06755
G01 X-51.03298 Y7.93819
G01 X-51.11284 Y7.88480
G01 X-51.32498 Y7.71070
G01 X-51.39292 Y7.64278
G01 X-51.56701 Y7.43062
G01 X-51.62038 Y7.35076
G01 X-51.74977 Y7.10872
G01 X-51.78652 Y7.01998
G01 X-51.86618 Y6.75734
G01 X-51.88492 Y6.66313
G01 X-51.91182 Y6.39001
G01 X-51.91418 Y6.34197
G01 X-51.91418 Y5.94258
G01 X-53.42477 Y4.43200
G01 X-56.08689 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.97340 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.97340 Y4.43200
G01 X-59.58691 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.47339 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.47339 Y4.43200
G01 X-63.08691 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.97339 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.97339 Y4.43200
G01 X-66.58690 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.82122 Y7.69879 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.82122 Y7.69879
G01 X-65.87250 Y7.66920
G01 X-65.87250 Y7.66917
G01 X-65.89891 Y7.64278
G01 X-66.03087 Y7.48198
G01 X-66.52949 Y7.48198
G01 X-66.54016 Y7.49498
G01 X-66.54016 Y7.99854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.31818 Y20.80064 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.31818 Y20.80064
G01 X-60.31818 Y20.90799
G01 X-60.32819 Y20.90799
G01 X-60.39039 Y20.91403
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.81818 Y21.46285 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.81818 Y21.46285
G01 X-60.82257 Y21.47250
G01 X-60.86507 Y21.52929
G01 X-60.93403 Y21.59201
G01 X-61.01363 Y21.64052
G01 X-61.07649 Y21.67105
G01 X-61.16379 Y21.70359
G01 X-61.25567 Y21.71903
G01 X-61.34881 Y21.71680
G01 X-61.41818 Y21.70849
G01 X-61.46986 Y21.69594
G01 X-61.49521 Y21.67974
G01 X-61.49524 Y21.67974
G01 X-61.61718 Y21.60189
G01 X-61.65353 Y21.57186
G01 X-61.71716 Y21.51403
G01 X-66.41174 Y16.81947
G01 X-66.49670 Y16.72133
G01 X-66.53902 Y16.66484
G01 X-66.55599 Y16.64142
G01 X-66.57720 Y16.48841
G01 X-66.57862 Y16.46187
G01 X-66.57991 Y16.41340
G01 X-66.57991 Y10.92444
G01 X-66.64085 Y10.79561
G01 X-66.67128 Y10.72233
G01 X-66.72739 Y10.56551
G01 X-66.74491 Y10.50788
G01 X-66.78418 Y10.35108
G01 X-66.79363 Y10.30379
G01 X-66.81687 Y10.14694
G01 X-66.82096 Y10.10559
G01 X-66.82868 Y9.94875
G01 X-66.82868 Y9.90920
G01 X-66.82096 Y9.75238
G01 X-66.81687 Y9.71103
G01 X-66.79363 Y9.55418
G01 X-66.78418 Y9.50689
G01 X-66.74491 Y9.35010
G01 X-66.72739 Y9.29246
G01 X-66.67128 Y9.13564
G01 X-66.64085 Y9.06236
G01 X-66.57991 Y8.93354
G01 X-66.57991 Y8.26580
G01 X-66.57059 Y8.13633
G01 X-66.56056 Y8.06646
G01 X-66.52177 Y7.93730
G01 X-66.49520 Y7.89592
G01 X-66.43094 Y7.82851
G01 X-66.37814 Y7.78274
G01 X-66.30221 Y7.72866
G01 X-66.21743 Y7.68995
G01 X-66.12683 Y7.66798
G01 X-66.05766 Y7.65805
G01 X-65.96953 Y7.65343
G01 X-65.88195 Y7.66470
G01 X-65.87826 Y7.66587
G01 X-65.87250 Y7.66917
G01 X-65.82122 Y7.69879
G01 X-65.80496 Y7.70837
G01 X-65.75065 Y7.74113
G01 X-65.65431 Y7.80799
G01 X-65.59462 Y7.85536
G01 X-65.55921 Y7.88208
G01 X-65.52101 Y7.90456
G01 X-65.34811 Y8.00062
G01 X-65.27872 Y8.03346
G01 X-65.19693 Y8.06735
G01 X-65.12465 Y8.09320
G01 X-64.93445 Y8.14751
G01 X-64.89150 Y8.15863
G01 X-64.84758 Y8.16478
G01 X-64.65111 Y8.18739
G01 X-64.57441 Y8.19114
G01 X-64.48594 Y8.19114
G01 X-64.40920 Y8.18739
G01 X-64.21276 Y8.16478
G01 X-64.16884 Y8.15863
G01 X-64.12589 Y8.14751
G01 X-63.93572 Y8.09320
G01 X-63.86341 Y8.06732
G01 X-63.78165 Y8.03346
G01 X-63.71223 Y8.00062
G01 X-63.53933 Y7.90456
G01 X-63.50113 Y7.88208
G01 X-63.46570 Y7.85533
G01 X-63.31081 Y7.73242
G01 X-63.25388 Y7.68081
G01 X-63.19135 Y7.61827
G01 X-63.18726 Y7.61375
G01 X-63.09186 Y7.52264
G01 X-63.03702 Y7.47723
G01 X-63.03323 Y7.47410
G01 X-62.77415 Y7.44637
G01 X-62.70428 Y7.44886
G01 X-62.52638 Y7.47255
G01 X-62.48274 Y7.50915
G01 X-62.44286 Y7.54464
G01 X-62.37311 Y7.61370
G01 X-62.36900 Y7.61827
G01 X-62.30646 Y7.68081
G01 X-62.24952 Y7.73242
G01 X-62.09465 Y7.85533
G01 X-62.05920 Y7.88208
G01 X-62.02102 Y7.90456
G01 X-61.84812 Y8.00062
G01 X-61.77870 Y8.03346
G01 X-61.69694 Y8.06732
G01 X-61.62463 Y8.09320
G01 X-61.43446 Y8.14751
G01 X-61.39151 Y8.15863
G01 X-61.34759 Y8.16478
G01 X-61.15112 Y8.18739
G01 X-61.07441 Y8.19114
G01 X-60.98594 Y8.19114
G01 X-60.90921 Y8.18739
G01 X-60.71277 Y8.16478
G01 X-60.66885 Y8.15863
G01 X-60.62590 Y8.14751
G01 X-60.43570 Y8.09320
G01 X-60.36342 Y8.06735
G01 X-60.28163 Y8.03346
G01 X-60.21221 Y8.00062
G01 X-60.03934 Y7.90456
G01 X-60.00114 Y7.88208
G01 X-59.96570 Y7.85536
G01 X-59.81081 Y7.73242
G01 X-59.75389 Y7.68081
G01 X-59.69131 Y7.61825
G01 X-59.68722 Y7.61370
G01 X-59.59192 Y7.52269
G01 X-59.53710 Y7.47730
G01 X-59.53322 Y7.47410
G01 X-59.27416 Y7.44637
G01 X-59.20429 Y7.44886
G01 X-59.02638 Y7.47255
G01 X-58.98275 Y7.50915
G01 X-58.94287 Y7.54464
G01 X-58.87312 Y7.61370
G01 X-58.86901 Y7.61827
G01 X-58.80647 Y7.68081
G01 X-58.74952 Y7.73242
G01 X-58.59466 Y7.85533
G01 X-58.55920 Y7.88208
G01 X-58.52100 Y7.90456
G01 X-58.34813 Y8.00062
G01 X-58.27868 Y8.03346
G01 X-58.19692 Y8.06732
G01 X-58.12463 Y8.09320
G01 X-57.93446 Y8.14751
G01 X-57.89151 Y8.15863
G01 X-57.84760 Y8.16478
G01 X-57.65113 Y8.18739
G01 X-57.57442 Y8.19114
G01 X-57.48595 Y8.19114
G01 X-57.40919 Y8.18739
G01 X-57.37516 Y8.18347
G01 X-57.24485 Y8.17786
G01 X-57.21138 Y8.17880
G01 X-57.17434 Y8.17913
G01 X-57.11651 Y8.17850
G01 X-57.10193 Y8.18004
G01 X-57.09083 Y8.18126
G01 X-57.08110 Y8.18375
G01 X-56.99675 Y8.22350
G01 X-56.92144 Y8.27852
G01 X-56.86919 Y8.32493
G01 X-56.80579 Y8.39305
G01 X-56.75641 Y8.47194
G01 X-56.72283 Y8.55873
G01 X-56.70394 Y8.62599
G01 X-56.68738 Y8.71774
G01 X-56.68849 Y8.81096
G01 X-56.70724 Y8.90229
G01 X-56.72774 Y8.96910
G01 X-56.76340 Y9.05513
G01 X-56.81468 Y9.13285
G01 X-56.85453 Y9.17367
G01 X-56.85458 Y9.17372
G01 X-56.88570 Y9.19246
G01 X-56.94836 Y9.22655
G01 X-57.02100 Y9.26208
G01 X-57.05664 Y9.27763
G01 X-57.05712 Y9.27786
G01 X-57.07061 Y9.28375
G01 X-57.10203 Y9.29820
G01 X-57.18897 Y9.34024
G01 X-57.30952 Y9.40902
G01 X-57.38255 Y9.45548
G01 X-57.55705 Y9.59808
G01 X-57.56583 Y9.60633
G01 X-57.62735 Y9.66998
G01 X-57.70952 Y9.76379
G01 X-57.71061 Y9.76521
G01 X-57.78161 Y9.84771
G01 X-57.79664 Y9.86318
G01 X-57.84389 Y9.91570
G01 X-57.88966 Y9.96678
G01 X-58.01336 Y9.99206
G01 X-58.04158 Y9.99589
G01 X-58.06784 Y9.99909
G01 X-58.09060 Y10.00153
G01 X-58.09535 Y10.00206
G01 X-58.11226 Y10.00407
G01 X-58.18036 Y10.01281
G01 X-58.25491 Y10.02556
G01 X-58.26718 Y10.02932
G01 X-58.33263 Y10.04989
G01 X-58.37457 Y10.06419
G01 X-58.41430 Y10.08370
G01 X-58.47510 Y10.11545
G01 X-58.48651 Y10.12149
G01 X-58.54831 Y10.16523
G01 X-58.58788 Y10.19581
G01 X-58.60170 Y10.20834
G01 X-58.63370 Y10.23882
G01 X-60.04404 Y11.64913
G01 X-60.07452 Y11.68113
G01 X-60.08706 Y11.69497
G01 X-60.11762 Y11.73452
G01 X-60.16136 Y11.79634
G01 X-60.16740 Y11.80772
G01 X-60.19915 Y11.86856
G01 X-60.21866 Y11.90828
G01 X-60.23296 Y11.95019
G01 X-60.25351 Y12.01565
G01 X-60.25727 Y12.02792
G01 X-60.27005 Y12.10247
G01 X-60.27642 Y12.15217
G01 X-60.27733 Y12.17069
G01 X-60.27843 Y12.21499
G01 X-60.27843 Y20.51543
G01 X-60.28775 Y20.64492
G01 X-60.29778 Y20.71477
G01 X-60.31818 Y20.80064
G01 X-60.32366 Y20.82363
G01 X-60.35884 Y20.87974
G01 X-60.39039 Y20.91403
G01 X-60.42981 Y20.93432
G01 X-60.48777 Y20.96679
G01 X-60.57203 Y21.01787
G01 X-60.64741 Y21.07875
G01 X-60.70685 Y21.15216
G01 X-60.74071 Y21.21670
G01 X-60.74970 Y21.23625
G01 X-60.75610 Y21.25680
G01 X-60.79362 Y21.38236
G01 X-60.79814 Y21.39798
G01 X-60.81335 Y21.45215
G01 X-60.81818 Y21.46285
G01 X-60.81818 Y22.35678
G01 X-60.51117 Y23.09797
G01 X-60.32819 Y23.28098
G01 X-59.58699 Y23.58799
G01 X-58.62819 Y23.58796
G01 X-58.53258 Y23.57857
G01 X-58.44066 Y23.55068
G01 X-58.35595 Y23.50539
G01 X-58.28171 Y23.44445
G01 X-58.22077 Y23.37021
G01 X-58.17548 Y23.28550
G01 X-58.14760 Y23.19358
G01 X-58.13820 Y23.09797
G01 X-58.13820 Y21.39798
G01 X-58.14760 Y21.30237
G01 X-58.17548 Y21.21045
G01 X-58.22077 Y21.12574
G01 X-58.28171 Y21.05149
G01 X-58.35595 Y20.99056
G01 X-58.44066 Y20.94527
G01 X-58.53258 Y20.91738
G01 X-58.62819 Y20.90799
G01 X-58.63820 Y20.90799
G01 X-58.63820 Y12.56292
G01 X-57.82705 Y11.75179
G01 X-57.80673 Y11.78220
G01 X-57.65750 Y11.96404
G01 X-57.58956 Y12.03195
G01 X-57.40772 Y12.18121
G01 X-57.32786 Y12.23457
G01 X-57.12039 Y12.34547
G01 X-57.03165 Y12.38222
G01 X-56.80653 Y12.45050
G01 X-56.71232 Y12.46924
G01 X-56.47821 Y12.49230
G01 X-56.38217 Y12.49230
G01 X-56.14806 Y12.46924
G01 X-56.05385 Y12.45050
G01 X-55.82873 Y12.38222
G01 X-55.73998 Y12.34547
G01 X-55.64496 Y12.29467
G01 X-53.03016 Y12.29467
G01 X-53.03016 Y29.07101
G01 X-53.02779 Y29.11904
G01 X-53.02109 Y29.18734
G01 X-53.00234 Y29.28155
G01 X-52.98243 Y29.34721
G01 X-52.94568 Y29.43596
G01 X-52.91332 Y29.49646
G01 X-52.85995 Y29.57632
G01 X-52.81644 Y29.62935
G01 X-52.78413 Y29.66499
G01 X-52.45022 Y29.99890
G01 X-52.46384 Y30.13697
G01 X-52.46384 Y30.23304
G01 X-52.44654 Y30.40863
G01 X-52.42780 Y30.50283
G01 X-52.37659 Y30.67167
G01 X-52.37100 Y30.68513
G01 X-52.32101 Y30.75036
G01 X-52.29262 Y30.78945
G01 X-52.26587 Y30.82834
G01 X-52.22256 Y30.89778
G01 X-52.22020 Y30.90197
G01 X-52.19330 Y30.94673
G01 X-52.17377 Y30.97172
G01 X-52.06668 Y31.10408
G01 X-52.06244 Y31.10860
G01 X-51.99869 Y31.17002
G01 X-51.91789 Y31.24053
G01 X-51.86244 Y31.28208
G01 X-51.78904 Y31.33161
G01 X-51.75134 Y31.35445
G01 X-51.63326 Y31.41442
G01 X-51.57009 Y31.44347
G01 X-51.55190 Y31.44924
G01 X-51.38319 Y31.50088
G01 X-51.37695 Y31.50276
G01 X-51.29592 Y31.51663
G01 X-51.17707 Y31.53141
G01 X-51.12036 Y31.53418
G01 X-51.03199 Y31.53418
G01 X-50.97527 Y31.53141
G01 X-50.85642 Y31.51663
G01 X-50.77540 Y31.50276
G01 X-50.76915 Y31.50088
G01 X-50.60044 Y31.44924
G01 X-50.58228 Y31.44347
G01 X-50.51906 Y31.41439
G01 X-50.40103 Y31.35445
G01 X-50.36331 Y31.33159
G01 X-50.28998 Y31.28211
G01 X-50.23445 Y31.24053
G01 X-50.15368 Y31.17002
G01 X-50.08988 Y31.10855
G01 X-50.08566 Y31.10408
G01 X-49.97855 Y30.97169
G01 X-49.95902 Y30.94667
G01 X-49.92983 Y30.89783
G01 X-49.85935 Y30.77101
G01 X-49.84619 Y30.74248
G01 X-49.81304 Y30.66034
G01 X-49.78617 Y30.58292
G01 X-49.76189 Y30.49151
G01 X-49.74342 Y30.40494
G01 X-49.74040 Y30.38638
G01 X-49.72678 Y30.22928
G01 X-49.72402 Y30.18503
G01 X-49.72678 Y30.14073
G01 X-49.74040 Y29.98368
G01 X-49.74342 Y29.96512
G01 X-49.76189 Y29.87855
G01 X-49.78617 Y29.78714
G01 X-49.81304 Y29.70972
G01 X-49.84619 Y29.62758
G01 X-49.85937 Y29.59898
G01 X-49.86092 Y29.59623
G01 X-49.92983 Y29.47223
G01 X-49.95902 Y29.42339
G01 X-49.97852 Y29.39839
G01 X-50.08566 Y29.26596
G01 X-50.08985 Y29.26151
G01 X-50.15373 Y29.19997
G01 X-50.23450 Y29.12948
G01 X-50.29000 Y29.08793
G01 X-50.36326 Y29.03847
G01 X-50.40100 Y29.01561
G01 X-50.51901 Y28.95567
G01 X-50.58226 Y28.92656
G01 X-50.60049 Y28.92077
G01 X-50.76920 Y28.86918
G01 X-50.77537 Y28.86730
G01 X-50.85637 Y28.85346
G01 X-50.90156 Y28.84782
G01 X-51.03026 Y28.82229
G01 X-51.03059 Y28.82219
G01 X-51.09976 Y28.80604
G01 X-51.12381 Y28.80134
G01 X-51.13186 Y28.79923
G01 X-51.13499 Y28.79844
G01 X-51.26229 Y28.81097
G01 X-51.35017 Y28.72308
G01 X-51.35017 Y28.57073
G01 X-51.38533 Y28.37523
G01 X-51.38774 Y28.34079
G01 X-51.38993 Y28.27805
G01 X-51.38993 Y12.82916
G01 X-51.38060 Y12.69970
G01 X-51.37055 Y12.62982
G01 X-51.33346 Y12.50328
G01 X-51.30519 Y12.45928
G01 X-51.24093 Y12.39187
G01 X-51.18812 Y12.34610
G01 X-51.13356 Y12.30625
G01 X-50.96516 Y12.26579
G01 X-50.91246 Y12.26012
G01 X-50.81568 Y12.25492
G01 X-46.41445 Y12.25492
G01 X-46.28498 Y12.26424
G01 X-46.21511 Y12.27427
G01 X-46.14719 Y12.29467
G01 X-46.08590 Y12.31308
G01 X-46.04444 Y12.33970
G01 X-45.97701 Y12.40401
G01 X-45.93126 Y12.45682
G01 X-45.87724 Y12.53272
G01 X-45.83855 Y12.61748
G01 X-45.81661 Y12.70803
G01 X-45.80668 Y12.77719
G01 X-45.80226 Y12.87016
G01 X-45.81516 Y12.95989
G01 X-45.84020 Y13.01082
G01 X-45.85712 Y13.04519
G01 X-45.89761 Y13.10350
G01 X-45.99133 Y13.21780
G01 X-45.99748 Y13.22418
G01 X-46.00838 Y13.23523
G01 X-47.91564 Y15.14254
G01 X-47.94614 Y15.17454
G01 X-47.98015 Y15.21211
G01 X-48.07060 Y15.32606
G01 X-48.09730 Y15.36144
G01 X-48.11978 Y15.39964
G01 X-48.19044 Y15.52677
G01 X-48.21211 Y15.57256
G01 X-48.24596 Y15.65433
G01 X-48.26301 Y15.70198
G01 X-48.30296 Y15.84190
G01 X-48.31409 Y15.88478
G01 X-48.32021 Y15.92865
G01 X-48.32115 Y15.93662
G01 X-48.33685 Y16.07320
G01 X-48.33933 Y16.12372
G01 X-48.34043 Y16.16799
G01 X-48.34043 Y31.81175
G01 X-48.34972 Y31.94119
G01 X-48.35978 Y32.01106
G01 X-48.38018 Y32.09290
G01 X-48.38018 Y32.09293
G01 X-48.38780 Y32.12348
G01 X-48.42521 Y32.18172
G01 X-48.43616 Y32.19318
G01 X-48.43616 Y32.73519
G01 X-48.38018 Y32.78114
G01 X-48.36672 Y32.80956
G01 X-48.32945 Y32.89930
G01 X-48.25930 Y33.09536
G01 X-48.23796 Y33.16557
G01 X-48.18887 Y33.36158
G01 X-48.17741 Y33.41903
G01 X-48.14833 Y33.61507
G01 X-48.14340 Y33.66516
G01 X-48.13375 Y33.86120
G01 X-48.13375 Y33.90897
G01 X-48.14340 Y34.10501
G01 X-48.14833 Y34.15515
G01 X-48.17744 Y34.35119
G01 X-48.18889 Y34.40864
G01 X-48.23116 Y34.57740
G01 X-48.23116 Y40.31503
G01 X-48.23199 Y40.34856
G01 X-48.24162 Y40.54457
G01 X-48.24848 Y40.61407
G01 X-48.27756 Y40.81005
G01 X-48.29301 Y40.88752
G01 X-48.34208 Y41.08351
G01 X-48.35818 Y41.14018
G01 X-48.35818 Y42.30571
G01 X-48.34142 Y42.45285
G01 X-48.34088 Y42.46900
G01 X-48.34043 Y42.49804
G01 X-48.34043 Y44.97901
G01 X-48.33933 Y45.02328
G01 X-48.33685 Y45.07385
G01 X-48.32023 Y45.21840
G01 X-48.31409 Y45.26227
G01 X-48.30296 Y45.30514
G01 X-48.26877 Y45.42488
G01 X-48.26641 Y45.43318
G01 X-48.26623 Y45.43379
G01 X-48.26301 Y45.44507
G01 X-48.24596 Y45.49272
G01 X-48.21211 Y45.57448
G01 X-48.19047 Y45.62020
G01 X-48.11978 Y45.74741
G01 X-48.09730 Y45.78558
G01 X-48.07058 Y45.82102
G01 X-47.98015 Y45.93494
G01 X-47.94612 Y45.97248
G01 X-47.91564 Y46.00451
G01 X-47.86562 Y46.05452
G01 X-47.83360 Y46.08502
G01 X-47.79610 Y46.11898
G01 X-47.68214 Y46.20946
G01 X-47.64675 Y46.23615
G01 X-47.60853 Y46.25866
G01 X-47.48137 Y46.32932
G01 X-47.43560 Y46.35096
G01 X-47.35381 Y46.38485
G01 X-47.30629 Y46.40184
G01 X-47.16626 Y46.44182
G01 X-47.12339 Y46.45294
G01 X-47.07952 Y46.45909
G01 X-46.93499 Y46.47573
G01 X-46.88442 Y46.47822
G01 X-46.79590 Y46.47822
G01 X-46.74536 Y46.47573
G01 X-46.60078 Y46.45909
G01 X-46.55694 Y46.45294
G01 X-46.51404 Y46.44182
G01 X-46.37416 Y46.40189
G01 X-46.32649 Y46.38482
G01 X-46.24470 Y46.35096
G01 X-46.19895 Y46.32932
G01 X-46.07178 Y46.25863
G01 X-46.03357 Y46.23615
G01 X-45.99819 Y46.20946
G01 X-45.88425 Y46.11903
G01 X-45.84671 Y46.08500
G01 X-45.78420 Y46.02249
G01 X-45.75016 Y45.98495
G01 X-45.65974 Y45.87100
G01 X-45.63304 Y45.83562
G01 X-45.61056 Y45.79742
G01 X-45.53987 Y45.67024
G01 X-45.51823 Y45.62450
G01 X-45.48437 Y45.54271
G01 X-45.46731 Y45.49503
G01 X-45.42738 Y45.35515
G01 X-45.41625 Y45.31228
G01 X-45.41013 Y45.26841
G01 X-45.39349 Y45.12386
G01 X-45.39100 Y45.07329
G01 X-45.39100 Y44.98477
G01 X-45.39349 Y44.93418
G01 X-45.41011 Y44.78967
G01 X-45.41628 Y44.74576
G01 X-45.42057 Y44.72810
G01 X-45.42710 Y44.70288
G01 X-45.43556 Y44.66714
G01 X-45.43601 Y44.66509
G01 X-45.43799 Y44.63481
G01 X-45.43992 Y44.57591
G01 X-45.43992 Y39.48255
G01 X-45.52766 Y39.29695
G01 X-45.55598 Y39.22870
G01 X-45.62611 Y39.03259
G01 X-45.64137 Y38.98232
G01 X-45.69047 Y38.78616
G01 X-45.69812 Y38.74773
G01 X-45.72715 Y38.55159
G01 X-45.73025 Y38.51994
G01 X-45.73980 Y38.32377
G01 X-45.74015 Y38.30902
G01 X-45.73733 Y31.75902
G01 X-45.73733 Y23.30549
G01 X-45.73695 Y23.29048
G01 X-45.72733 Y23.09447
G01 X-45.72413 Y23.06226
G01 X-45.69507 Y22.86620
G01 X-45.68727 Y22.82718
G01 X-45.63817 Y22.63117
G01 X-45.62270 Y22.58030
G01 X-45.55257 Y22.38426
G01 X-45.53952 Y22.35050
G01 X-45.43992 Y22.10999
G01 X-45.43992 Y17.00654
G01 X-45.43060 Y16.87706
G01 X-45.42054 Y16.80718
G01 X-45.41600 Y16.77863
G01 X-45.32291 Y16.65557
G01 X-45.30515 Y16.63581
G01 X-45.27173 Y16.60050
G01 X-45.08953 Y16.41831
G01 X-44.99131 Y16.33332
G01 X-44.93480 Y16.29098
G01 X-44.87244 Y16.25745
G01 X-42.94722 Y14.33223
G01 X-42.93040 Y14.29799
G01 X-42.88992 Y14.23967
G01 X-42.79619 Y14.12540
G01 X-42.79002 Y14.11902
G01 X-42.77915 Y14.10795
G01 X-42.02766 Y13.35644
G01 X-41.92944 Y13.27140
G01 X-41.87293 Y13.22911
G01 X-41.84956 Y13.21217
G01 X-41.69660 Y13.19098
G01 X-41.67008 Y13.18953
G01 X-41.62162 Y13.18824
G01 X-41.46018 Y13.18824
G01 X-41.41491 Y13.18710
G01 X-41.39538 Y13.18514
G01 X-41.29835 Y13.15949
G01 X-41.21428 Y13.11664
G01 X-41.14090 Y13.05723
G01 X-41.08151 Y12.98390
G01 X-41.03866 Y12.89980
G01 X-41.01304 Y12.80284
G01 X-41.01105 Y12.78334
G01 X-41.00994 Y12.73797
G01 X-41.00994 Y10.73798
G01 X-41.01105 Y10.69266
G01 X-41.01304 Y10.67316
G01 X-41.03869 Y10.57618
G01 X-41.03917 Y10.57504
G01 X-41.08149 Y10.49213
G01 X-41.14092 Y10.41872
G01 X-41.21425 Y10.35937
G01 X-41.26035 Y10.33450
G01 X-41.37874 Y10.27504
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.93692 Y3.99440 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.93692 Y3.99440
G01 X-51.01855 Y4.03807
G01 X-51.08850 Y3.96809
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.96516 Y12.26579 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.96516 Y12.26579
G01 X-51.08533 Y12.29467
G01 X-51.35017 Y12.29467
G01 X-51.35017 Y12.56028
G01 X-51.37055 Y12.62982
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.86018 Y24.21966 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.86018 Y24.21966
G01 X-41.04009 Y24.12350
G01 X-41.11994 Y24.07013
G01 X-41.36241 Y23.87115
G01 X-41.43033 Y23.80323
G01 X-41.62932 Y23.56079
G01 X-41.68268 Y23.48090
G01 X-41.77885 Y23.30102
G01 X-41.92063 Y23.30102
G01 X-41.88062 Y23.38995
G01 X-41.74229 Y23.61875
G01 X-41.57740 Y23.82921
G01 X-41.38837 Y24.01824
G01 X-41.17791 Y24.18314
G01 X-40.94908 Y24.32147
G01 X-40.86018 Y24.36147
G01 X-40.86018 Y24.21966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-38.23194 Y24.64618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-38.23194 Y24.64618
G01 X-38.23227 Y24.64443
G01 X-38.23361 Y24.64173
G01 X-38.27105 Y24.58276
G01 X-38.32820 Y24.50920
G01 X-38.39826 Y24.44783
G01 X-38.47865 Y24.40079
G01 X-38.54205 Y24.37140
G01 X-38.62996 Y24.34041
G01 X-38.72216 Y24.32665
G01 X-38.81527 Y24.33058
G01 X-38.88449 Y24.34016
G01 X-38.98017 Y24.36769
G01 X-38.98017 Y24.21966
G01 X-38.80029 Y24.12350
G01 X-38.72043 Y24.07013
G01 X-38.47796 Y23.87115
G01 X-38.41004 Y23.80323
G01 X-38.23191 Y23.58619
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-38.23191 Y21.13582 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-38.23191 Y21.13582
G01 X-38.23194 Y20.10898
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.84641 Y16.73799 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.84641 Y16.73799
G01 X-40.86145 Y16.51828
G01 X-40.86998 Y16.47716
G01 X-40.98243 Y16.58963
G01 X-40.97255 Y16.68996
G01 X-40.97019 Y16.73799
G01 X-40.97019 Y16.89862
G01 X-40.86998 Y16.99882
G01 X-40.86145 Y16.95775
G01 X-40.84641 Y16.73799
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.94724 Y14.33226 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.94724 Y14.33226
G01 X-42.97237 Y14.38333
G01 X-42.98527 Y14.47305
G01 X-42.98085 Y14.56601
G01 X-42.97092 Y14.63515
G01 X-42.94895 Y14.72575
G01 X-42.91024 Y14.81054
G01 X-42.85619 Y14.88643
G01 X-42.81044 Y14.93921
G01 X-42.74300 Y15.00350
G01 X-42.66464 Y15.05384
G01 X-42.57816 Y15.08846
G01 X-42.51110 Y15.10815
G01 X-42.37310 Y15.12801
G01 X-42.35007 Y15.12801
G01 X-42.20013 Y15.14861
G01 X-42.31176 Y15.26022
G01 X-42.41217 Y15.25034
G01 X-42.50821 Y15.25034
G01 X-42.70330 Y15.26957
G01 X-42.79751 Y15.28829
G01 X-42.98512 Y15.34523
G01 X-43.07386 Y15.38196
G01 X-43.24674 Y15.47437
G01 X-43.32662 Y15.52773
G01 X-43.47816 Y15.65209
G01 X-43.54608 Y15.72001
G01 X-43.67043 Y15.87157
G01 X-43.72380 Y15.95145
G01 X-43.81620 Y16.12433
G01 X-43.85296 Y16.21307
G01 X-43.90988 Y16.40065
G01 X-43.92862 Y16.49489
G01 X-43.94783 Y16.68996
G01 X-43.95019 Y16.73799
G01 X-43.95019 Y16.89867
G01 X-44.05037 Y16.99882
G01 X-44.05890 Y16.95778
G01 X-44.07092 Y16.78209
G01 X-44.10063 Y16.64437
G01 X-44.12504 Y16.57889
G01 X-44.16578 Y16.49504
G01 X-44.22166 Y16.42039
G01 X-44.29068 Y16.35770
G01 X-44.34663 Y16.31582
G01 X-44.42613 Y16.26738
G01 X-44.51338 Y16.23487
G01 X-44.60523 Y16.21942
G01 X-44.67490 Y16.21445
G01 X-44.76797 Y16.21668
G01 X-44.81615 Y16.22715
G01 X-44.87239 Y16.25740
G01 X-44.93480 Y16.29098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.85712 Y13.04519 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.85712 Y13.04519
G01 X-45.84025 Y13.01087
G01 X-45.41270 Y12.58331
G01 X-45.12402 Y12.29467
G01 X-46.14721 Y12.29467
G01 X-46.21511 Y12.27427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.53417 Y10.10067 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.53417 Y10.10067
G01 X-41.52540 Y10.13600
G01 X-41.50254 Y10.17422
G01 X-41.44323 Y10.24153
G01 X-41.43501 Y10.24931
G01 X-41.37874 Y10.27504
G01 X-41.43180 Y10.25078
G01 X-41.46018 Y10.24799
G01 X-41.53417 Y10.24799
G01 X-41.53417 Y10.10064
G01 X-41.55738 Y10.00707
G01 X-41.56597 Y9.94232
G01 X-41.57392 Y9.82279
G01 X-41.57392 Y7.68444
G01 X-41.56609 Y7.56592
G01 X-41.55766 Y7.50174
G01 X-41.55563 Y7.48729
G01 X-41.50846 Y7.40839
G01 X-41.49995 Y7.39562
G01 X-41.46160 Y7.33278
G01 X-41.36554 Y7.15993
G01 X-41.33269 Y7.09049
G01 X-41.29886 Y7.00877
G01 X-41.27298 Y6.93646
G01 X-41.21867 Y6.74629
G01 X-41.20752 Y6.70331
G01 X-41.20138 Y6.65940
G01 X-41.17877 Y6.46293
G01 X-41.17501 Y6.38622
G01 X-41.17392 Y6.34197
G01 X-41.17392 Y5.64198
G01 X-41.17501 Y5.59775
G01 X-41.17877 Y5.52105
G01 X-41.20138 Y5.32458
G01 X-41.20752 Y5.28066
G01 X-41.21867 Y5.23768
G01 X-41.27298 Y5.04751
G01 X-41.29886 Y4.97520
G01 X-41.33269 Y4.89349
G01 X-41.36554 Y4.82407
G01 X-41.46160 Y4.65120
G01 X-41.48410 Y4.61295
G01 X-41.51082 Y4.57751
G01 X-41.63376 Y4.42260
G01 X-41.68535 Y4.36570
G01 X-41.74788 Y4.30317
G01 X-41.80480 Y4.25158
G01 X-41.95969 Y4.12864
G01 X-41.99513 Y4.10190
G01 X-42.03333 Y4.07942
G01 X-42.20623 Y3.98333
G01 X-42.27760 Y3.94957
G01 X-42.35741 Y3.91663
G01 X-42.42969 Y3.89077
G01 X-42.61989 Y3.83647
G01 X-42.66284 Y3.82534
G01 X-42.70676 Y3.81920
G01 X-42.90323 Y3.79659
G01 X-42.97993 Y3.79283
G01 X-43.06840 Y3.79283
G01 X-43.14511 Y3.79659
G01 X-43.34158 Y3.81920
G01 X-43.38552 Y3.82534
G01 X-43.42845 Y3.83647
G01 X-43.61864 Y3.89077
G01 X-43.69093 Y3.91663
G01 X-43.77272 Y3.95051
G01 X-43.84214 Y3.98336
G01 X-44.01501 Y4.07942
G01 X-44.05321 Y4.10190
G01 X-44.08864 Y4.12862
G01 X-44.24353 Y4.25155
G01 X-44.30046 Y4.30317
G01 X-44.36304 Y4.36573
G01 X-44.36713 Y4.37027
G01 X-44.46243 Y4.46128
G01 X-44.51724 Y4.50667
G01 X-44.52113 Y4.50987
G01 X-44.78019 Y4.53761
G01 X-44.85006 Y4.53512
G01 X-45.02796 Y4.51142
G01 X-45.07160 Y4.47482
G01 X-45.11148 Y4.43934
G01 X-45.18123 Y4.37027
G01 X-45.18534 Y4.36570
G01 X-45.24790 Y4.30317
G01 X-45.30482 Y4.25155
G01 X-45.45971 Y4.12862
G01 X-45.49514 Y4.10190
G01 X-45.53335 Y4.07942
G01 X-45.70622 Y3.98336
G01 X-45.77564 Y3.95051
G01 X-45.85742 Y3.91666
G01 X-45.92971 Y3.89077
G01 X-46.11988 Y3.83647
G01 X-46.16283 Y3.82534
G01 X-46.20675 Y3.81920
G01 X-46.40322 Y3.79659
G01 X-46.47995 Y3.79283
G01 X-46.56842 Y3.79283
G01 X-46.64513 Y3.79659
G01 X-46.84160 Y3.81920
G01 X-46.88551 Y3.82534
G01 X-46.92847 Y3.83647
G01 X-47.11864 Y3.89077
G01 X-47.19092 Y3.91666
G01 X-47.27271 Y3.95051
G01 X-47.34213 Y3.98336
G01 X-47.51500 Y4.07942
G01 X-47.55320 Y4.10190
G01 X-47.58864 Y4.12862
G01 X-47.74353 Y4.25155
G01 X-47.80045 Y4.30317
G01 X-47.86301 Y4.36570
G01 X-47.86712 Y4.37027
G01 X-47.96242 Y4.46128
G01 X-48.01724 Y4.50667
G01 X-48.02112 Y4.50987
G01 X-48.28018 Y4.53761
G01 X-48.35005 Y4.53512
G01 X-48.52796 Y4.51142
G01 X-48.57162 Y4.47482
G01 X-48.61147 Y4.43934
G01 X-48.68122 Y4.37027
G01 X-48.68531 Y4.36573
G01 X-48.74789 Y4.30317
G01 X-48.80482 Y4.25155
G01 X-48.95970 Y4.12862
G01 X-48.99514 Y4.10190
G01 X-49.03334 Y4.07942
G01 X-49.20621 Y3.98336
G01 X-49.27563 Y3.95051
G01 X-49.35742 Y3.91663
G01 X-49.42971 Y3.89077
G01 X-49.61990 Y3.83647
G01 X-49.66283 Y3.82534
G01 X-49.70677 Y3.81920
G01 X-49.90321 Y3.79659
G01 X-49.97995 Y3.79283
G01 X-50.06841 Y3.79283
G01 X-50.14512 Y3.79659
G01 X-50.34159 Y3.81920
G01 X-50.38551 Y3.82534
G01 X-50.42846 Y3.83647
G01 X-50.61863 Y3.89077
G01 X-50.69094 Y3.91666
G01 X-50.69422 Y3.91782
G01 X-50.77464 Y3.94693
G01 X-50.81738 Y3.96126
G01 X-50.88541 Y3.98221
G01 X-50.93689 Y3.99440
G01 X-50.93692 Y3.99440
G01 X-50.94520 Y3.99639
G01 X-50.97707 Y3.99677
G01 X-51.06846 Y3.98028
G01 X-51.08850 Y3.96809
G01 X-51.08853 Y3.96809
G01 X-51.14819 Y3.93187
G01 X-51.20560 Y3.89047
G01 X-51.31200 Y3.80075
G01 X-51.31515 Y3.79766
G01 X-51.32035 Y3.79250
G01 X-52.34276 Y2.77007
G01 X-52.37481 Y2.73957
G01 X-52.39739 Y2.71910
G01 X-52.44524 Y2.68214
G01 X-52.45088 Y2.67777
G01 X-52.51763 Y2.63088
G01 X-52.52381 Y2.62763
G01 X-52.61070 Y2.58227
G01 X-52.61382 Y2.58064
G01 X-52.65048 Y2.56273
G01 X-52.69244 Y2.54841
G01 X-52.78596 Y2.51905
G01 X-52.79264 Y2.51696
G01 X-52.87288 Y2.50297
G01 X-52.94014 Y2.49433
G01 X-52.97039 Y2.49283
G01 X-53.01471 Y2.49174
G01 X-86.97545 Y2.49174
G01 X-87.01978 Y2.49283
G01 X-87.05003 Y2.49433
G01 X-87.11726 Y2.50297
G01 X-87.19752 Y2.51699
G01 X-87.20418 Y2.51905
G01 X-87.29768 Y2.54841
G01 X-87.33966 Y2.56273
G01 X-87.37941 Y2.58227
G01 X-87.46631 Y2.62761
G01 X-87.47251 Y2.63088
G01 X-87.53923 Y2.67777
G01 X-87.59280 Y2.71915
G01 X-87.61530 Y2.73954
G01 X-87.64736 Y2.77007
G01 X-88.93610 Y4.05879
G01 X-88.96663 Y4.09085
G01 X-88.98701 Y4.11333
G01 X-89.02841 Y4.16695
G01 X-89.07530 Y4.23367
G01 X-89.07855 Y4.23984
G01 X-89.12391 Y4.32674
G01 X-89.14344 Y4.36651
G01 X-89.15777 Y4.40848
G01 X-89.18713 Y4.50200
G01 X-89.18919 Y4.50863
G01 X-89.20321 Y4.58889
G01 X-89.21185 Y4.65613
G01 X-89.21335 Y4.68638
G01 X-89.21444 Y4.73070
G01 X-89.21444 Y7.25325
G01 X-89.21335 Y7.29757
G01 X-89.21185 Y7.32785
G01 X-89.20321 Y7.39508
G01 X-89.19902 Y7.42396
G01 X-89.18919 Y7.47535
G01 X-89.18713 Y7.48200
G01 X-89.15777 Y7.57553
G01 X-89.14344 Y7.61746
G01 X-89.12391 Y7.65726
G01 X-89.07855 Y7.74416
G01 X-89.07532 Y7.75030
G01 X-89.02841 Y7.81705
G01 X-88.98701 Y7.87065
G01 X-88.96661 Y7.89315
G01 X-88.93610 Y7.92521
G01 X-86.76837 Y10.09292
G01 X-86.73631 Y10.12345
G01 X-86.71378 Y10.14385
G01 X-86.66021 Y10.18522
G01 X-86.59349 Y10.23214
G01 X-86.58732 Y10.23539
G01 X-86.56052 Y10.24936
G01 X-86.50042 Y10.28073
G01 X-86.46065 Y10.30026
G01 X-86.41868 Y10.31458
G01 X-86.32516 Y10.34395
G01 X-86.31853 Y10.34600
G01 X-86.23827 Y10.36003
G01 X-86.19687 Y10.36533
G01 X-86.17101 Y10.36866
G01 X-86.14078 Y10.37016
G01 X-86.09646 Y10.37123
G01 X-83.89093 Y10.37123
G01 X-83.76144 Y10.38055
G01 X-83.69156 Y10.39061
G01 X-83.62367 Y10.41098
G01 X-83.56243 Y10.42937
G01 X-83.52103 Y10.45596
G01 X-83.45362 Y10.52022
G01 X-83.40784 Y10.57303
G01 X-83.35377 Y10.64895
G01 X-83.31506 Y10.73374
G01 X-83.29309 Y10.82434
G01 X-83.28316 Y10.89350
G01 X-83.27874 Y10.98647
G01 X-83.29200 Y11.07862
G01 X-83.32242 Y11.16660
G01 X-83.35143 Y11.23015
G01 X-83.41239 Y11.33005
G01 X-83.45588 Y11.37336
G01 X-83.50792 Y11.39650
G01 X-83.55191 Y11.41740
G01 X-83.63022 Y11.45715
G01 X-83.67307 Y11.48037
G01 X-83.74645 Y11.53980
G01 X-83.75245 Y11.54654
G01 X-83.83893 Y11.64450
G01 X-83.88498 Y11.70076
G01 X-83.89128 Y11.70904
G01 X-83.89311 Y11.71146
G01 X-83.90815 Y11.71953
G01 X-84.08801 Y11.75276
G01 X-84.12738 Y11.75591
G01 X-84.19926 Y11.75878
G01 X-89.99287 Y11.75878
G01 X-90.03719 Y11.75987
G01 X-90.06745 Y11.76137
G01 X-90.13468 Y11.77000
G01 X-90.21494 Y11.78403
G01 X-90.22160 Y11.78608
G01 X-90.24225 Y11.79256
G01 X-90.29714 Y11.87470
G01 X-90.31296 Y11.89916
G01 X-90.34382 Y11.94849
G01 X-90.35624 Y11.96772
G01 X-90.40537 Y12.04123
G01 X-90.43587 Y12.09198
G01 X-90.44880 Y12.11618
G01 X-90.47458 Y12.15929
G01 X-90.48931 Y12.18133
G01 X-90.50143 Y12.20046
G01 X-90.55954 Y12.29741
G01 X-90.58042 Y12.32868
G01 X-90.67484 Y12.45601
G01 X-90.69480 Y12.48034
G01 X-90.80024 Y12.59667
G01 X-90.82109 Y12.61753
G01 X-90.93742 Y12.72296
G01 X-90.96175 Y12.74293
G01 X-91.08908 Y12.83734
G01 X-91.12035 Y12.85822
G01 X-91.25904 Y12.94133
G01 X-91.30204 Y12.96429
G01 X-91.45261 Y13.03551
G01 X-91.51428 Y13.06099
G01 X-91.67763 Y13.11941
G01 X-91.76754 Y13.14656
G01 X-91.77646 Y13.14879
G01 X-92.92108 Y14.29342
G01 X-92.95162 Y14.32547
G01 X-92.97201 Y14.34798
G01 X-93.01339 Y14.40157
G01 X-93.06030 Y14.46830
G01 X-93.06355 Y14.47450
G01 X-93.10889 Y14.56136
G01 X-93.12845 Y14.60111
G01 X-93.14275 Y14.64307
G01 X-93.17211 Y14.73662
G01 X-93.17420 Y14.74328
G01 X-93.18283 Y14.78747
G01 X-93.18822 Y14.82352
G01 X-93.19683 Y14.89075
G01 X-93.19833 Y14.92100
G01 X-93.19942 Y14.96535
G01 X-93.19942 Y29.35498
G01 X-93.19833 Y29.39920
G01 X-93.19693 Y29.42781
G01 X-93.19693 Y29.43113
G01 X-93.19589 Y29.45173
G01 X-93.19513 Y29.47119
G01 X-93.19441 Y29.50652
G01 X-93.19441 Y71.90499
G01 X-93.19335 Y71.94928
G01 X-93.19185 Y71.97956
G01 X-93.19073 Y71.98822
G01 X-93.18321 Y72.04680
G01 X-93.16919 Y72.12708
G01 X-93.16713 Y72.13371
G01 X-93.13777 Y72.22724
G01 X-93.12347 Y72.26917
G01 X-93.10391 Y72.30897
G01 X-93.05855 Y72.39587
G01 X-93.05532 Y72.40201
G01 X-93.05116 Y72.40849
G01 X-93.03658 Y72.43023
G01 X-93.00841 Y72.46877
G01 X-92.96703 Y72.52233
G01 X-92.94661 Y72.54486
G01 X-92.91611 Y72.57692
G01 X-85.73710 Y79.75592
G01 X-85.70505 Y79.78643
G01 X-85.68257 Y79.80683
G01 X-85.62895 Y79.84823
G01 X-85.56217 Y79.89514
G01 X-85.55605 Y79.89837
G01 X-85.53113 Y79.91140
G01 X-85.46916 Y79.94373
G01 X-85.42941 Y79.96326
G01 X-85.38742 Y79.97759
G01 X-85.29390 Y80.00695
G01 X-85.28727 Y80.00901
G01 X-85.20700 Y80.02303
G01 X-85.15051 Y80.03029
G01 X-85.13977 Y80.03167
G01 X-85.10952 Y80.03317
G01 X-85.06517 Y80.03426
G01 X-83.19611 Y80.03426
G01 X-83.06665 Y80.04355
G01 X-82.99677 Y80.05359
G01 X-82.94071 Y80.06337
G01 X-82.88214 Y80.11521
G01 X-82.84600 Y80.14894
G01 X-82.84407 Y80.15087
G01 X-82.82484 Y80.16926
G01 X-82.78961 Y80.20200
G01 X-82.78123 Y80.20970
G01 X-82.76611 Y80.22341
G01 X-82.74318 Y80.24061
G01 X-82.67010 Y80.29006
G01 X-82.65936 Y80.29656
G01 X-82.62657 Y80.31257
G01 X-82.54498 Y80.34746
G01 X-82.54104 Y80.34894
G01 X-82.49774 Y80.36057
G01 X-82.41125 Y80.37932
G01 X-82.40988 Y80.37954
G01 X-82.37348 Y80.38262
G01 X-82.36238 Y80.38315
G01 X-82.31818 Y80.38424
G01 X-80.86818 Y80.38424
G01 X-80.82395 Y80.38315
G01 X-80.81288 Y80.38262
G01 X-80.77646 Y80.37954
G01 X-80.77508 Y80.37932
G01 X-80.68855 Y80.36055
G01 X-80.64529 Y80.34894
G01 X-80.64130 Y80.34744
G01 X-80.60483 Y80.33301
G01 X-80.55926 Y80.31381
G01 X-80.51738 Y80.29738
G01 X-80.51326 Y80.29588
G01 X-80.50612 Y80.29326
G01 X-80.46678 Y80.28915
G01 X-80.37285 Y80.28424
G01 X-64.97222 Y80.28424
G01 X-64.84276 Y80.29354
G01 X-64.77288 Y80.30360
G01 X-64.74423 Y80.30815
G01 X-64.62101 Y80.40141
G01 X-64.60128 Y80.41912
G01 X-64.56615 Y80.45242
G01 X-61.87019 Y83.14837
G01 X-59.78188 Y85.23671
G01 X-59.74980 Y85.26724
G01 X-59.71279 Y85.30077
G01 X-59.63588 Y85.36021
G01 X-59.56319 Y85.41085
G01 X-59.56088 Y85.41230
G01 X-59.43294 Y85.47905
G01 X-59.39316 Y85.49858
G01 X-59.35128 Y85.51288
G01 X-59.21361 Y85.55614
G01 X-59.21094 Y85.55675
G01 X-59.12367 Y85.57235
G01 X-59.02735 Y85.58472
G01 X-58.97739 Y85.58715
G01 X-58.93319 Y85.58825
G01 X-46.30716 Y85.58825
G01 X-46.26296 Y85.58715
G01 X-46.21300 Y85.58472
G01 X-46.11668 Y85.57235
G01 X-46.02938 Y85.55675
G01 X-46.02674 Y85.55614
G01 X-45.88905 Y85.51288
G01 X-45.84716 Y85.49858
G01 X-45.80739 Y85.47905
G01 X-45.67947 Y85.41230
G01 X-45.67714 Y85.41083
G01 X-45.60444 Y85.36018
G01 X-45.52755 Y85.30079
G01 X-45.49052 Y85.26724
G01 X-45.45847 Y85.23669
G01 X-44.41046 Y84.18868
G01 X-44.37991 Y84.15663
G01 X-44.34635 Y84.11957
G01 X-44.29995 Y84.05952
G01 X-44.28697 Y84.04271
G01 X-44.23630 Y83.97001
G01 X-44.23487 Y83.96773
G01 X-44.16810 Y83.83976
G01 X-44.14856 Y83.79999
G01 X-44.14811 Y83.79877
G01 X-44.13426 Y83.75810
G01 X-44.09875 Y83.64507
G01 X-44.08976 Y83.61794
G01 X-44.05974 Y83.53196
G01 X-44.05550 Y83.52003
G01 X-44.03083 Y83.45226
G01 X-44.02690 Y83.44245
G01 X-44.02151 Y83.38800
G01 X-44.01918 Y83.33997
G01 X-44.01918 Y83.25538
G01 X-43.99652 Y83.23273
G01 X-43.84105 Y83.04332
G01 X-43.78768 Y82.96344
G01 X-43.67219 Y82.74733
G01 X-43.63541 Y82.65859
G01 X-43.56429 Y82.42409
G01 X-43.54554 Y82.32988
G01 X-43.52151 Y82.08602
G01 X-43.51918 Y82.03799
G01 X-43.51918 Y67.93624
G01 X-43.24915 Y67.66621
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.22033 Y63.60480 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.22033 Y63.60480
G01 X-50.24919 Y63.48471
G01 X-50.24919 Y63.22002
G01 X-50.51479 Y63.22002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.18174 Y60.56061 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.18174 Y60.56061
G01 X-57.36896 Y60.37339
G01 X-57.55682 Y60.56122
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.19917 Y66.45991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.19917 Y66.45991
G01 X-53.19917 Y66.57802
G01 X-53.34611 Y66.57802
G01 X-53.32302 Y66.55493
G01 X-53.19917 Y66.45991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.19917 Y69.55803 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.19917 Y69.55803
G01 X-53.34603 Y69.55803
G01 X-53.32302 Y69.58104
G01 X-53.19917 Y69.67609
G01 X-53.19917 Y69.55803
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.24919 Y66.36560 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.24919 Y66.36560
G01 X-50.24919 Y69.76026
G01 X-50.23684 Y69.79651
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.47398 Y80.38940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.47398 Y80.38940
G01 X-60.47662 Y80.39097
G01 X-60.48516 Y80.40037
G01 X-60.52702 Y80.45633
G01 X-60.57543 Y80.53578
G01 X-60.60794 Y80.62298
G01 X-60.62338 Y80.71475
G01 X-60.62839 Y80.78442
G01 X-60.62620 Y80.87761
G01 X-60.61571 Y80.92580
G01 X-60.55178 Y81.04462
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.04304 Y78.81442 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.04304 Y78.81442
G01 X-62.04495 Y78.81765
G01 X-62.05716 Y78.83048
G01 X-62.13184 Y78.88402
G01 X-62.21520 Y78.92268
G01 X-62.28106 Y78.94599
G01 X-62.37146 Y78.96860
G01 X-62.46450 Y78.97368
G01 X-62.55681 Y78.96106
G01 X-62.62175 Y78.94579
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.80861 Y77.86439 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.80861 Y77.86439
G01 X-67.93770 Y77.82563
G01 X-67.97915 Y77.79901
G01 X-68.04656 Y77.73474
G01 X-68.09233 Y77.68194
G01 X-68.14641 Y77.60602
G01 X-68.18512 Y77.52123
G01 X-68.20709 Y77.43063
G01 X-68.20793 Y77.42476
G01 X-68.21702 Y77.36147
G01 X-68.22144 Y77.26843
G01 X-68.20815 Y77.17625
G01 X-68.17770 Y77.08821
G01 X-68.14867 Y77.02466
G01 X-68.10274 Y76.94493
G01 X-68.04270 Y76.87518
G01 X-67.97193 Y76.81890
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.21336 Y76.21222 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.21336 Y76.21222
G01 X-69.21339 Y76.33559
G01 X-69.22281 Y76.43117
G01 X-69.25070 Y76.52309
G01 X-69.29596 Y76.60780
G01 X-69.33790 Y76.65890
G01 X-69.35690 Y76.68207
G01 X-69.43116 Y76.74300
G01 X-69.51587 Y76.78826
G01 X-69.60780 Y76.81615
G01 X-69.70338 Y76.82558
G01 X-71.50340 Y76.82558
G01 X-71.59898 Y76.81615
G01 X-71.69090 Y76.78826
G01 X-71.77561 Y76.74300
G01 X-71.84988 Y76.68207
G01 X-71.91081 Y76.60780
G01 X-71.95608 Y76.52309
G01 X-71.98397 Y76.43117
G01 X-71.99339 Y76.33559
G01 X-71.99336 Y74.99421
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.04109 Y74.04557 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.04109 Y74.04557
G01 X-70.12179 Y73.12622
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.13077 Y67.98053 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.13077 Y67.98053
G01 X-76.24007 Y68.01371
G01 X-76.33428 Y68.03245
G01 X-76.49036 Y68.04784
G01 X-76.53839 Y68.05018
G01 X-77.33839 Y68.05018
G01 X-77.38642 Y68.04784
G01 X-77.54248 Y68.03245
G01 X-77.63671 Y68.01371
G01 X-77.78677 Y67.96819
G01 X-77.87552 Y67.93141
G01 X-78.01382 Y67.85750
G01 X-78.09371 Y67.80413
G01 X-78.12129 Y67.78148
G01 X-78.21492 Y67.70464
G01 X-78.28284 Y67.63672
G01 X-78.31283 Y67.60017
G01 X-78.59300 Y67.60017
G01 X-78.64100 Y67.59781
G01 X-78.70930 Y67.59110
G01 X-78.80351 Y67.57236
G01 X-78.86917 Y67.55244
G01 X-78.95792 Y67.51569
G01 X-79.01842 Y67.48333
G01 X-79.09828 Y67.42996
G01 X-79.15131 Y67.38645
G01 X-79.18695 Y67.35415
G01 X-79.88415 Y66.65694
G01 X-79.91646 Y66.62130
G01 X-79.95997 Y66.56827
G01 X-80.01334 Y66.48841
G01 X-80.04570 Y66.42791
G01 X-80.08245 Y66.33916
G01 X-80.10237 Y66.27350
G01 X-80.10917 Y66.23931
G01 X-80.11514 Y66.17874
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.20683 Y70.22800 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.20683 Y70.22800
G01 X-82.37973 Y70.32038
G01 X-82.45961 Y70.37375
G01 X-82.61115 Y70.49811
G01 X-82.67907 Y70.56603
G01 X-82.80343 Y70.71756
G01 X-82.85679 Y70.79745
G01 X-82.94920 Y70.97032
G01 X-82.98595 Y71.05907
G01 X-83.04287 Y71.24667
G01 X-83.06162 Y71.34088
G01 X-83.08082 Y71.53598
G01 X-83.08082 Y71.63201
G01 X-83.06162 Y71.82711
G01 X-83.04287 Y71.92132
G01 X-82.98595 Y72.10892
G01 X-82.94920 Y72.19767
G01 X-82.85679 Y72.37054
G01 X-82.80343 Y72.45043
G01 X-82.67907 Y72.60196
G01 X-82.64676 Y72.63425
G01 X-82.61115 Y72.66988
G01 X-82.45961 Y72.79424
G01 X-82.37973 Y72.84761
G01 X-82.30935 Y72.88522
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.91903 Y62.44938 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.91903 Y62.44938
G01 X-91.04552 Y62.41230
G01 X-91.08957 Y62.38400
G01 X-91.15698 Y62.31974
G01 X-91.20275 Y62.26693
G01 X-91.24260 Y62.21237
G01 X-91.25418 Y62.16416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25418 Y57.59287 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25418 Y57.59287
G01 X-91.23579 Y57.53158
G01 X-91.20912 Y57.49013
G01 X-91.14484 Y57.42269
G01 X-91.09203 Y57.37695
G01 X-91.02137 Y57.32600
G01 X-90.94281 Y57.28835
G01 X-90.87257 Y57.26900
G01 X-90.86836 Y57.26941
G01 X-90.85784 Y57.27050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.39188 Y56.84977 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.39188 Y56.84977
G01 X-88.36016 Y56.82976
G01 X-88.20606 Y56.79966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.95603 Y62.42898 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.95603 Y62.42898
G01 X-82.92530 Y62.41217
G01 X-82.84818 Y62.35995
G01 X-82.78234 Y62.29408
G01 X-82.73015 Y62.21697
G01 X-82.69667 Y62.15565
G01 X-82.66350 Y62.07816
G01 X-82.56987 Y62.09680
G01 X-82.50157 Y62.10351
G01 X-82.45357 Y62.10587
G01 X-82.29662 Y62.10587
G01 X-82.26665 Y62.14240
G01 X-82.21102 Y62.19802
G01 X-82.17005 Y62.27465
G01 X-82.11669 Y62.35451
G01 X-82.05557 Y62.42898
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.45360 Y60.45164 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.45360 Y60.45164
G01 X-80.29050 Y60.49495
G01 X-80.24996 Y60.47329
G01 X-80.17569 Y60.41235
G01 X-80.11476 Y60.33808
G01 X-80.07082 Y60.25589
G01 X-79.63165 Y60.25589
G01 X-79.59543 Y60.24354
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.89330 Y60.25589 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.89330 Y60.25589
G01 X-78.83198 Y60.27430
G01 X-78.79058 Y60.30090
G01 X-78.72314 Y60.36521
G01 X-78.67740 Y60.41802
G01 X-78.62337 Y60.49391
G01 X-78.58469 Y60.57867
G01 X-78.56582 Y60.65650
G01 X-78.56274 Y60.66922
G01 X-78.55972 Y60.69018
G01 X-78.15944 Y60.69018
G01 X-78.09371 Y60.63623
G01 X-78.01382 Y60.58286
G01 X-77.87552 Y60.50892
G01 X-77.78677 Y60.47217
G01 X-77.63671 Y60.42665
G01 X-77.55388 Y60.41017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.88040 Y57.87057 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.88040 Y57.87057
G01 X-76.94837 Y57.85018
G01 X-77.33839 Y57.85018
G01 X-77.38642 Y57.85254
G01 X-77.54248 Y57.86791
G01 X-77.63671 Y57.88665
G01 X-77.78677 Y57.93217
G01 X-77.87552 Y57.96892
G01 X-78.01382 Y58.04286
G01 X-78.09371 Y58.09623
G01 X-78.21492 Y58.19572
G01 X-78.28284 Y58.26364
G01 X-78.29289 Y58.27588
G01 X-80.07079 Y58.27588
G01 X-80.11476 Y58.19364
G01 X-80.17569 Y58.11939
G01 X-80.24996 Y58.05843
G01 X-80.33218 Y58.01449
G01 X-80.33218 Y57.66935
G01 X-79.94692 Y57.28409
G01 X-79.01900 Y57.28409
G01 X-78.95329 Y57.33801
G01 X-78.87344 Y57.39138
G01 X-78.73511 Y57.46532
G01 X-78.64639 Y57.50207
G01 X-78.49630 Y57.54759
G01 X-78.40209 Y57.56633
G01 X-78.24601 Y57.58170
G01 X-78.14997 Y57.58170
G01 X-77.99389 Y57.56633
G01 X-77.89968 Y57.54759
G01 X-77.74959 Y57.50207
G01 X-77.66950 Y57.46887
G01 X-77.66087 Y57.46532
G01 X-77.52254 Y57.39138
G01 X-77.44268 Y57.33801
G01 X-77.32145 Y57.23852
G01 X-77.28114 Y57.19821
G01 X-77.27918 Y57.19453
G01 X-77.26259 Y57.16316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.57211 Y60.10336 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.57211 Y60.10336
G01 X-70.56855 Y60.10923
G01 X-70.55382 Y60.16168
G01 X-70.54605 Y60.25446
G01 X-70.55600 Y60.34702
G01 X-70.57002 Y60.41548
G01 X-70.60256 Y60.51682
G01 X-70.65623 Y60.60872
G01 X-70.67810 Y60.63826
G01 X-70.72537 Y60.69312
G01 X-70.77241 Y60.74019
G01 X-70.59941 Y60.74019
G01 X-70.59492 Y60.73572
G01 X-70.47371 Y60.63623
G01 X-70.39382 Y60.58286
G01 X-70.25552 Y60.50892
G01 X-70.16677 Y60.47217
G01 X-70.01671 Y60.42665
G01 X-69.93388 Y60.41017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.53193 Y55.00406 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.53193 Y55.00406
G01 X-68.47178 Y54.98704
G01 X-68.44628 Y54.97172
G01 X-68.37897 Y54.91216
G01 X-68.33112 Y54.86126
G01 X-68.27407 Y54.78767
G01 X-68.23198 Y54.70459
G01 X-68.20635 Y54.61508
G01 X-68.19360 Y54.54640
G01 X-68.18540 Y54.45366
G01 X-68.19485 Y54.36103
G01 X-68.22124 Y54.27325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.35305 Y51.84955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.35305 Y51.84955
G01 X-72.43167 Y51.92817
G01 X-72.51031 Y51.84955
G01 X-72.43167 Y51.84391
G01 X-72.35305 Y51.84955
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.01808 Y53.25753 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.01808 Y53.25753
G01 X-71.02369 Y53.33614
G01 X-71.10233 Y53.25753
G01 X-71.02369 Y53.17891
G01 X-71.01808 Y53.25753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.35305 Y54.66550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.35305 Y54.66550
G01 X-72.43169 Y54.58689
G01 X-72.51031 Y54.66550
G01 X-72.43167 Y54.67114
G01 X-72.35305 Y54.66550
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.76105 Y53.25753 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.76105 Y53.25753
G01 X-73.83966 Y53.33614
G01 X-73.84528 Y53.25753
G01 X-73.83966 Y53.17891
G01 X-73.76105 Y53.25753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.95762 Y50.89553 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.95762 Y50.89553
G01 X-74.07167 Y50.89553
G01 X-74.07167 Y51.00958
G01 X-73.95762 Y50.89553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.95762 Y49.01552 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.95762 Y49.01552
G01 X-74.07167 Y48.90148
G01 X-74.07167 Y49.01552
G01 X-73.95762 Y49.01552
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.95167 Y50.89553 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.95167 Y50.89553
G01 X-76.06572 Y50.89553
G01 X-75.95167 Y51.00958
G01 X-75.95167 Y50.89553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.95167 Y48.90148 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.95167 Y48.90148
G01 X-76.06572 Y49.01552
G01 X-75.95167 Y49.01552
G01 X-75.95167 Y48.90148
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.21969 Y46.54756 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.21969 Y46.54756
G01 X-77.21969 Y45.62495
G01 X-77.18314 Y45.59498
G01 X-77.11522 Y45.52706
G01 X-77.05279 Y45.45096
G01 X-77.01573 Y45.40583
G01 X-76.96237 Y45.32594
G01 X-76.88845 Y45.18764
G01 X-76.85167 Y45.09889
G01 X-76.80616 Y44.94883
G01 X-76.78741 Y44.85462
G01 X-76.77204 Y44.69854
G01 X-76.77204 Y44.60248
G01 X-76.78741 Y44.44642
G01 X-76.80616 Y44.35221
G01 X-76.85167 Y44.20212
G01 X-76.88845 Y44.11337
G01 X-76.96237 Y43.97507
G01 X-77.01573 Y43.89521
G01 X-77.11522 Y43.77398
G01 X-77.18314 Y43.70606
G01 X-77.30438 Y43.60657
G01 X-77.38423 Y43.55320
G01 X-77.52256 Y43.47926
G01 X-77.61131 Y43.44251
G01 X-77.76137 Y43.39699
G01 X-77.84413 Y43.38053
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.38431 Y46.28533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.38431 Y46.28533
G01 X-76.44477 Y46.17225
G01 X-76.48152 Y46.08350
G01 X-76.54812 Y45.86402
G01 X-76.56684 Y45.76978
G01 X-76.58932 Y45.54154
G01 X-76.58932 Y45.44548
G01 X-76.56684 Y45.21723
G01 X-76.54812 Y45.12302
G01 X-76.48152 Y44.90354
G01 X-76.44477 Y44.81480
G01 X-76.33664 Y44.61251
G01 X-76.30888 Y44.57096
G01 X-76.28327 Y44.53265
G01 X-76.13778 Y44.35533
G01 X-76.06986 Y44.28741
G01 X-75.89254 Y44.14192
G01 X-75.81269 Y44.08856
G01 X-75.77166 Y44.06664
G01 X-75.77166 Y43.97243
G01 X-76.79358 Y42.95051
G01 X-77.08525 Y42.95051
G01 X-77.11522 Y42.98706
G01 X-77.18314 Y43.05498
G01 X-77.30438 Y43.15447
G01 X-77.38423 Y43.20784
G01 X-77.52256 Y43.28175
G01 X-77.61131 Y43.31851
G01 X-77.76137 Y43.36405
G01 X-77.84413 Y43.38053
G01 X-78.27514 Y43.38053
G01 X-78.35799 Y43.39699
G01 X-78.50808 Y43.44251
G01 X-78.59681 Y43.47926
G01 X-78.73513 Y43.55320
G01 X-78.81499 Y43.60657
G01 X-78.93623 Y43.70606
G01 X-79.00415 Y43.77398
G01 X-79.10364 Y43.89521
G01 X-79.15700 Y43.97507
G01 X-79.17981 Y44.01774
G01 X-79.23094 Y44.11337
G01 X-79.26770 Y44.20212
G01 X-79.31321 Y44.35221
G01 X-79.33196 Y44.44642
G01 X-79.34732 Y44.60248
G01 X-79.34732 Y44.69854
G01 X-79.33196 Y44.85462
G01 X-79.31321 Y44.94883
G01 X-79.26770 Y45.09889
G01 X-79.23094 Y45.18764
G01 X-79.15700 Y45.32594
G01 X-79.10364 Y45.40583
G01 X-79.00415 Y45.52706
G01 X-78.93623 Y45.59498
G01 X-78.89968 Y45.62495
G01 X-78.89968 Y45.79798
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.27514 Y43.38053 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.27514 Y43.38053
G01 X-78.35799 Y43.36405
G01 X-78.50808 Y43.31851
G01 X-78.59681 Y43.28175
G01 X-78.73513 Y43.20784
G01 X-78.81499 Y43.15447
G01 X-78.93623 Y43.05498
G01 X-79.00415 Y42.98706
G01 X-79.10199 Y42.86783
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.81357 Y40.15499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.81357 Y40.15499
G01 X-79.81918 Y40.07637
G01 X-79.89779 Y40.15499
G01 X-79.81918 Y40.23360
G01 X-79.81357 Y40.15499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.70663 Y38.29604 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.70663 Y38.29604
G01 X-80.70988 Y38.30836
G01 X-81.26889 Y38.86733
G01 X-81.27521 Y38.86733
G01 X-81.27778 Y38.86759
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.99827 Y41.18597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.99827 Y41.18597
G01 X-81.98250 Y41.19893
G01 X-81.90262 Y41.25229
G01 X-81.76431 Y41.32623
G01 X-81.67556 Y41.36299
G01 X-81.52550 Y41.40850
G01 X-81.43129 Y41.42725
G01 X-81.27521 Y41.44261
G01 X-81.26889 Y41.44261
G01 X-81.14854 Y41.56296
G01 X-81.22715 Y41.56860
G01 X-81.42835 Y41.55420
G01 X-81.62545 Y41.51132
G01 X-81.63810 Y41.50660
G01 X-81.68829 Y41.49090
G01 X-81.71399 Y41.48435
G01 X-81.75303 Y41.47838
G01 X-81.80884 Y41.46987
G01 X-81.90470 Y41.47414
G01 X-81.97384 Y41.48407
G01 X-82.06439 Y41.50601
G01 X-82.14912 Y41.54470
G01 X-82.22502 Y41.59872
G01 X-82.27782 Y41.64447
G01 X-82.34214 Y41.71191
G01 X-82.36878 Y41.75338
G01 X-82.40757 Y41.88257
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.66611 Y43.21366 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.66611 Y43.21366
G01 X-82.62509 Y43.36570
G01 X-82.61801 Y43.37812
G01 X-82.56200 Y43.44518
G01 X-82.51260 Y43.49458
G01 X-82.44077 Y43.55386
G01 X-82.35903 Y43.59852
G01 X-82.27031 Y43.62689
G01 X-82.20203 Y43.64175
G01 X-82.10947 Y43.65280
G01 X-82.01648 Y43.64614
G01 X-81.92647 Y43.62201
G01 X-81.86101 Y43.59758
G01 X-81.75418 Y43.53921
G01 X-81.75418 Y43.71896
G01 X-81.75865 Y43.72343
G01 X-81.84120 Y43.82402
G01 X-81.85814 Y43.84467
G01 X-81.91151 Y43.92453
G01 X-81.98544 Y44.06285
G01 X-82.02220 Y44.15158
G01 X-82.06772 Y44.30166
G01 X-82.08417 Y44.38439
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.08417 Y44.81540 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.08417 Y44.81540
G01 X-82.10066 Y44.89828
G01 X-82.14618 Y45.04837
G01 X-82.18293 Y45.13710
G01 X-82.25687 Y45.27542
G01 X-82.31023 Y45.35528
G01 X-82.39217 Y45.45518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.18597 Y45.37913 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.18597 Y45.37913
G01 X-85.24312 Y45.35549
G01 X-85.30362 Y45.32313
G01 X-85.38348 Y45.26976
G01 X-85.43652 Y45.22625
G01 X-85.47215 Y45.19394
G01 X-85.52608 Y45.14002
G01 X-85.56220 Y45.10392
G01 X-85.56220 Y45.70070
G01 X-85.58257 Y45.76859
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.02358 Y45.42229 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.02358 Y45.42229
G01 X-88.97796 Y45.39788
G01 X-88.89811 Y45.34449
G01 X-88.76930 Y45.23880
G01 X-88.70138 Y45.17088
G01 X-88.64238 Y45.09897
G01 X-87.24218 Y45.09897
G01 X-87.24218 Y51.87203
G01 X-88.02013 Y52.64998
G01 X-88.64238 Y52.64998
G01 X-88.70138 Y52.57808
G01 X-88.76930 Y52.51016
G01 X-88.89811 Y52.40444
G01 X-88.97796 Y52.35108
G01 X-89.12493 Y52.27254
G01 X-89.21368 Y52.23579
G01 X-89.37311 Y52.18740
G01 X-89.46732 Y52.16865
G01 X-89.63316 Y52.15232
G01 X-89.68119 Y52.14999
G01 X-89.98119 Y52.14999
G01 X-90.02922 Y52.15232
G01 X-90.19506 Y52.16865
G01 X-90.28926 Y52.18740
G01 X-90.44870 Y52.23579
G01 X-90.53745 Y52.27254
G01 X-90.68441 Y52.35108
G01 X-90.76427 Y52.40444
G01 X-90.81083 Y52.44267
G01 X-90.89307 Y52.51016
G01 X-90.96099 Y52.57808
G01 X-91.06671 Y52.70688
G01 X-91.12007 Y52.78676
G01 X-91.19863 Y52.93370
G01 X-91.23539 Y53.02245
G01 X-91.25416 Y53.08430
G01 X-91.25418 Y53.08448
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25416 Y53.89563 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25416 Y53.89563
G01 X-91.23539 Y53.95750
G01 X-91.19863 Y54.04625
G01 X-91.12007 Y54.19319
G01 X-91.06671 Y54.27307
G01 X-90.96099 Y54.40187
G01 X-90.89307 Y54.46979
G01 X-90.76427 Y54.57551
G01 X-90.68441 Y54.62887
G01 X-90.63872 Y54.65328
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.02358 Y54.65328 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.02358 Y54.65328
G01 X-88.97796 Y54.62887
G01 X-88.89811 Y54.57551
G01 X-88.76930 Y54.46979
G01 X-88.70138 Y54.40187
G01 X-88.64238 Y54.32997
G01 X-87.67220 Y54.32997
G01 X-87.62417 Y54.32760
G01 X-87.55587 Y54.32090
G01 X-87.46166 Y54.30215
G01 X-87.39684 Y54.28249
G01 X-87.39613 Y54.28191
G01 X-87.39181 Y54.27856
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.08221 Y55.17038 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.08221 Y55.17038
G01 X-87.15015 Y55.15000
G01 X-88.38218 Y55.15000
G01 X-88.41807 Y55.06331
G01 X-88.44118 Y55.02011
G01 X-88.49455 Y54.94023
G01 X-88.52564 Y54.90235
G01 X-88.59356 Y54.83443
G01 X-88.59745 Y54.83123
G01 X-88.63143 Y54.80332
G01 X-88.71131 Y54.74995
G01 X-88.75452 Y54.72687
G01 X-88.84327 Y54.69011
G01 X-88.89018 Y54.67589
G01 X-88.98439 Y54.65714
G01 X-89.02358 Y54.65328
G01 X-89.03346 Y54.65524
G01 X-89.08116 Y54.66596
G01 X-89.13928 Y54.68051
G01 X-89.22765 Y54.69814
G01 X-89.39424 Y54.72283
G01 X-89.47524 Y54.73083
G01 X-89.64187 Y54.73901
G01 X-89.68119 Y54.73997
G01 X-89.98116 Y54.73997
G01 X-90.02048 Y54.73901
G01 X-90.18710 Y54.73083
G01 X-90.26811 Y54.72283
G01 X-90.43470 Y54.69814
G01 X-90.52307 Y54.68051
G01 X-90.58116 Y54.66596
G01 X-90.62889 Y54.65524
G01 X-90.63872 Y54.65328
G01 X-90.67799 Y54.65714
G01 X-90.77219 Y54.67589
G01 X-90.81911 Y54.69011
G01 X-90.90786 Y54.72687
G01 X-90.95106 Y54.74995
G01 X-91.03094 Y54.80332
G01 X-91.06882 Y54.83443
G01 X-91.13673 Y54.90235
G01 X-91.16782 Y54.94023
G01 X-91.22119 Y55.02011
G01 X-91.24430 Y55.06331
G01 X-91.25418 Y55.08719
G01 X-91.25418 Y54.73040
G01 X-91.25416 Y53.89563
G01 X-91.26927 Y53.79370
G01 X-91.27839 Y53.70147
G01 X-91.28657 Y53.53482
G01 X-91.28657 Y53.44513
G01 X-91.27839 Y53.27851
G01 X-91.26927 Y53.18628
G01 X-91.25418 Y53.08458
G01 X-91.25418 Y47.66175
G01 X-91.24430 Y47.68563
G01 X-91.22119 Y47.72886
G01 X-91.16782 Y47.80872
G01 X-91.13673 Y47.84662
G01 X-91.06882 Y47.91453
G01 X-91.03094 Y47.94562
G01 X-90.95106 Y47.99899
G01 X-90.90786 Y48.02208
G01 X-90.81911 Y48.05886
G01 X-90.77219 Y48.07308
G01 X-90.67799 Y48.09180
G01 X-90.62922 Y48.09663
G01 X-90.58119 Y48.09896
G01 X-89.08119 Y48.09896
G01 X-89.03316 Y48.09663
G01 X-88.98439 Y48.09180
G01 X-88.89018 Y48.07308
G01 X-88.84327 Y48.05886
G01 X-88.75452 Y48.02208
G01 X-88.71131 Y47.99899
G01 X-88.63143 Y47.94562
G01 X-88.59356 Y47.91453
G01 X-88.52564 Y47.84662
G01 X-88.49455 Y47.80872
G01 X-88.44118 Y47.72886
G01 X-88.41807 Y47.68563
G01 X-88.38132 Y47.59688
G01 X-88.36709 Y47.54999
G01 X-88.34835 Y47.45579
G01 X-88.34355 Y47.40699
G01 X-88.34119 Y47.35899
G01 X-88.34119 Y46.15896
G01 X-88.34355 Y46.11096
G01 X-88.34835 Y46.06216
G01 X-88.36709 Y45.96796
G01 X-88.38132 Y45.92107
G01 X-88.41807 Y45.83232
G01 X-88.44118 Y45.78909
G01 X-88.49455 Y45.70923
G01 X-88.52564 Y45.67133
G01 X-88.59356 Y45.60341
G01 X-88.59747 Y45.60021
G01 X-88.63143 Y45.57232
G01 X-88.71131 Y45.51896
G01 X-88.75452 Y45.49587
G01 X-88.84327 Y45.45909
G01 X-88.89018 Y45.44487
G01 X-88.98439 Y45.42615
G01 X-89.02358 Y45.42229
G01 X-89.03346 Y45.42424
G01 X-89.08116 Y45.43496
G01 X-89.13928 Y45.44952
G01 X-89.22765 Y45.46714
G01 X-89.39424 Y45.49183
G01 X-89.47524 Y45.49983
G01 X-89.64187 Y45.50801
G01 X-89.68119 Y45.50898
G01 X-89.98116 Y45.50898
G01 X-90.02048 Y45.50801
G01 X-90.18710 Y45.49983
G01 X-90.26811 Y45.49183
G01 X-90.43470 Y45.46714
G01 X-90.52307 Y45.44952
G01 X-90.58116 Y45.43496
G01 X-90.62889 Y45.42424
G01 X-90.63872 Y45.42229
G01 X-90.68441 Y45.39788
G01 X-90.76427 Y45.34449
G01 X-90.89307 Y45.23880
G01 X-90.96099 Y45.17088
G01 X-91.06671 Y45.04207
G01 X-91.12007 Y44.96219
G01 X-91.19863 Y44.81525
G01 X-91.23539 Y44.72650
G01 X-91.25416 Y44.66460
G01 X-91.26927 Y44.56270
G01 X-91.27839 Y44.47047
G01 X-91.28657 Y44.30382
G01 X-91.28657 Y44.21414
G01 X-91.27839 Y44.04751
G01 X-91.26927 Y43.95528
G01 X-91.25418 Y43.85358
G01 X-91.25418 Y43.85348
G01 X-91.25416 Y43.85330
G01 X-91.23539 Y43.79145
G01 X-91.19863 Y43.70271
G01 X-91.12007 Y43.55577
G01 X-91.06671 Y43.47588
G01 X-90.96099 Y43.34708
G01 X-90.89307 Y43.27916
G01 X-90.81083 Y43.21165
G01 X-90.76427 Y43.17345
G01 X-90.68441 Y43.12008
G01 X-90.53745 Y43.04154
G01 X-90.44870 Y43.00477
G01 X-90.28926 Y42.95640
G01 X-90.19506 Y42.93766
G01 X-90.02922 Y42.92133
G01 X-89.98119 Y42.91896
G01 X-89.68119 Y42.91896
G01 X-89.63316 Y42.92133
G01 X-89.46732 Y42.93766
G01 X-89.37311 Y42.95640
G01 X-89.21368 Y43.00477
G01 X-89.12493 Y43.04154
G01 X-88.97796 Y43.12008
G01 X-88.89811 Y43.17345
G01 X-88.76930 Y43.27916
G01 X-88.70138 Y43.34708
G01 X-88.64238 Y43.41899
G01 X-85.21919 Y43.41899
G01 X-85.17116 Y43.42135
G01 X-85.10286 Y43.42806
G01 X-85.00865 Y43.44680
G01 X-84.94300 Y43.46672
G01 X-84.85425 Y43.50347
G01 X-84.79375 Y43.53583
G01 X-84.71389 Y43.58919
G01 X-84.66085 Y43.63270
G01 X-84.62522 Y43.66501
G01 X-84.53025 Y43.75998
G01 X-84.32865 Y43.75998
G01 X-84.32118 Y43.75089
G01 X-84.32118 Y42.31396
G01 X-84.31882 Y42.26596
G01 X-84.31211 Y42.19766
G01 X-84.29337 Y42.10345
G01 X-84.27345 Y42.03779
G01 X-84.23670 Y41.94904
G01 X-84.20434 Y41.88854
G01 X-84.15097 Y41.80868
G01 X-84.10746 Y41.75564
G01 X-84.07515 Y41.72001
G01 X-84.06718 Y41.71203
G01 X-84.06718 Y41.44104
G01 X-84.12278 Y41.43555
G01 X-84.21470 Y41.40766
G01 X-84.29941 Y41.36240
G01 X-84.37368 Y41.30147
G01 X-84.43461 Y41.22720
G01 X-84.47988 Y41.14249
G01 X-84.50777 Y41.05057
G01 X-84.51719 Y40.95499
G01 X-84.51719 Y39.35496
G01 X-84.50777 Y39.25938
G01 X-84.47988 Y39.16746
G01 X-84.43461 Y39.08275
G01 X-84.37368 Y39.00848
G01 X-84.29941 Y38.94755
G01 X-84.21470 Y38.90228
G01 X-84.12278 Y38.87440
G01 X-84.02720 Y38.86497
G01 X-83.65108 Y38.86497
G01 X-81.42967 Y36.64359
G01 X-81.42967 Y36.61296
G01 X-81.46622 Y36.58299
G01 X-81.53414 Y36.51504
G01 X-81.63363 Y36.39383
G01 X-81.68699 Y36.31395
G01 X-81.76093 Y36.17565
G01 X-81.79769 Y36.08690
G01 X-81.84320 Y35.93683
G01 X-81.85966 Y35.85398
G01 X-81.85966 Y34.62297
G01 X-81.87615 Y34.54019
G01 X-81.92169 Y34.39013
G01 X-81.95844 Y34.30138
G01 X-82.03236 Y34.16308
G01 X-82.08572 Y34.08319
G01 X-82.18522 Y33.96198
G01 X-82.25316 Y33.89404
G01 X-82.28969 Y33.86407
G01 X-82.28969 Y33.42043
G01 X-81.48225 Y32.61297
G01 X-77.31616 Y32.61297
G01 X-76.53460 Y33.39452
G01 X-76.54812 Y33.43902
G01 X-76.56684 Y33.53323
G01 X-76.58932 Y33.76148
G01 X-76.58932 Y33.85754
G01 X-76.56684 Y34.08578
G01 X-76.54812 Y34.18002
G01 X-76.48152 Y34.39950
G01 X-76.44477 Y34.48825
G01 X-76.33664 Y34.69051
G01 X-76.28327 Y34.77039
G01 X-76.13778 Y34.94768
G01 X-76.06986 Y35.01560
G01 X-75.95002 Y35.11393
G01 X-75.95000 Y35.11398
G01 X-75.87733 Y35.14260
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.48526 Y34.60676 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.48526 Y34.60676
G01 X-73.47025 Y34.59754
G01 X-73.31477 Y34.56856
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.34782 Y32.20997 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.34782 Y32.20997
G01 X-75.34721 Y32.21012
G01 X-75.34718 Y32.21015
G01 X-75.29765 Y32.20804
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.63493 Y29.23471 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.63493 Y29.23471
G01 X-77.61398 Y29.24048
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.33964 Y24.73897 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.33964 Y24.73897
G01 X-71.23218 Y24.73897
G01 X-71.23218 Y24.74897
G01 X-71.22603 Y24.81138
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.55220 Y24.60935 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.55220 Y24.60935
G01 X-68.55217 Y23.63292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.83742 Y24.34768 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.83742 Y24.34768
G01 X-68.55217 Y23.63292
G01 X-68.79406 Y23.04900
G01 X-68.85634 Y22.94029
G01 X-69.04216 Y22.88700
G01 X-70.74216 Y22.88700
G01 X-71.06616 Y23.04898
G01 X-71.15417 Y23.13699
G01 X-72.43873 Y23.13699
G01 X-72.55402 Y23.09574
G01 X-72.62460 Y23.07427
G01 X-72.78142 Y23.03501
G01 X-72.84101 Y23.02312
G01 X-72.99781 Y22.99985
G01 X-73.05115 Y22.99460
G01 X-73.20799 Y22.98687
G01 X-73.25940 Y22.98687
G01 X-73.41620 Y22.99460
G01 X-73.46951 Y22.99985
G01 X-73.62636 Y23.02312
G01 X-73.68594 Y23.03501
G01 X-73.84276 Y23.07427
G01 X-73.91332 Y23.09574
G01 X-74.07017 Y23.15185
G01 X-74.15734 Y23.18807
G01 X-74.21424 Y23.21497
G01 X-77.67225 Y23.21497
G01 X-79.74969 Y25.29243
G01 X-79.74969 Y26.24407
G01 X-79.71316 Y26.27404
G01 X-79.64522 Y26.34198
G01 X-79.54572 Y26.46319
G01 X-79.49236 Y26.54308
G01 X-79.41844 Y26.68138
G01 X-79.38169 Y26.77013
G01 X-79.33615 Y26.92019
G01 X-79.31969 Y27.00297
G01 X-79.31969 Y28.23398
G01 X-79.33615 Y28.31683
G01 X-79.38169 Y28.46690
G01 X-79.41844 Y28.55565
G01 X-79.49236 Y28.69395
G01 X-79.53450 Y28.75699
G01 X-79.55080 Y28.76967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.08758 Y28.76888 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.08758 Y28.76888
G01 X-79.10633 Y28.75483
G01 X-79.10633 Y28.75481
G01 X-79.14699 Y28.69395
G01 X-79.22093 Y28.55565
G01 X-79.25769 Y28.46690
G01 X-79.30320 Y28.31683
G01 X-79.31969 Y28.23398
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.31969 Y27.00297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.31969 Y27.00297
G01 X-79.30320 Y26.92019
G01 X-79.25769 Y26.77013
G01 X-79.22093 Y26.68138
G01 X-79.14699 Y26.54308
G01 X-79.09363 Y26.46319
G01 X-79.07468 Y26.44011
G01 X-78.99414 Y26.34198
G01 X-78.92622 Y26.27404
G01 X-78.80498 Y26.17457
G01 X-78.72513 Y26.12121
G01 X-78.58682 Y26.04727
G01 X-78.49808 Y26.01051
G01 X-78.34799 Y25.96497
G01 X-78.25378 Y25.94625
G01 X-78.09772 Y25.93086
G01 X-78.00166 Y25.93086
G01 X-77.84558 Y25.94625
G01 X-77.75137 Y25.96497
G01 X-77.60130 Y26.01051
G01 X-77.51256 Y26.04727
G01 X-77.37425 Y26.12121
G01 X-77.29437 Y26.17457
G01 X-77.17316 Y26.27404
G01 X-77.10522 Y26.34198
G01 X-77.00572 Y26.46319
G01 X-76.95236 Y26.54308
G01 X-76.87844 Y26.68138
G01 X-76.84169 Y26.77013
G01 X-76.79615 Y26.92019
G01 X-76.77743 Y27.01442
G01 X-76.76204 Y27.17048
G01 X-76.75967 Y27.21851
G01 X-76.75967 Y27.72057
G01 X-76.51073 Y27.96954
G01 X-76.35858 Y27.96954
G01 X-76.33664 Y27.92852
G01 X-76.28327 Y27.84864
G01 X-76.13778 Y27.67134
G01 X-76.06986 Y27.60342
G01 X-75.89254 Y27.45791
G01 X-75.81269 Y27.40454
G01 X-75.61040 Y27.29644
G01 X-75.52165 Y27.25966
G01 X-75.30217 Y27.19309
G01 X-75.20796 Y27.17434
G01 X-74.97972 Y27.15186
G01 X-74.88366 Y27.15186
G01 X-74.65541 Y27.17434
G01 X-74.56120 Y27.19309
G01 X-74.51670 Y27.20660
G01 X-74.07368 Y26.76357
G01 X-74.07368 Y25.02197
G01 X-74.11023 Y24.99197
G01 X-74.17815 Y24.92406
G01 X-74.27764 Y24.80282
G01 X-74.33100 Y24.72296
G01 X-74.40494 Y24.58463
G01 X-74.44170 Y24.49589
G01 X-74.48721 Y24.34582
G01 X-74.50596 Y24.25162
G01 X-74.52132 Y24.09553
G01 X-74.52132 Y23.99950
G01 X-74.50596 Y23.84341
G01 X-74.48721 Y23.74920
G01 X-74.44170 Y23.59912
G01 X-74.40494 Y23.51039
G01 X-74.33100 Y23.37206
G01 X-74.27764 Y23.29221
G01 X-74.21424 Y23.21497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.06740 Y19.68452 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.06740 Y19.68452
G01 X-77.22703 Y19.68452
G01 X-77.26140 Y19.64263
G01 X-77.32932 Y19.57471
G01 X-77.37367 Y19.53832
G01 X-77.37367 Y19.37883
G01 X-77.28124 Y19.44975
G01 X-77.13641 Y19.59458
G01 X-77.06740 Y19.68452
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.58367 Y19.95267 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.58367 Y19.95267
G01 X-79.62957 Y19.86684
G01 X-79.68293 Y19.78698
G01 X-79.80140 Y19.64263
G01 X-79.86932 Y19.57471
G01 X-79.87570 Y19.56948
G01 X-79.89439 Y19.47548
G01 X-79.92284 Y19.38170
G01 X-79.92619 Y19.37357
G01 X-79.92789 Y19.37126
G01 X-79.95827 Y19.33034
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.45392 Y17.86603 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.45392 Y17.86603
G01 X-81.48936 Y17.84182
G01 X-81.50803 Y17.82049
G01 X-81.55499 Y17.74005
G01 X-81.58588 Y17.65211
G01 X-81.60267 Y17.58432
G01 X-81.61633 Y17.49217
G01 X-81.61234 Y17.39913
G01 X-81.59083 Y17.30850
G01 X-81.56830 Y17.24238
G01 X-81.53614 Y17.17424
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.09754 Y14.06558 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.09754 Y14.06558
G01 X-79.07628 Y13.99469
G01 X-79.07547 Y13.63899
G01 X-79.05738 Y13.62090
G01 X-78.95167 Y13.49210
G01 X-78.89830 Y13.41224
G01 X-78.81974 Y13.26528
G01 X-78.78299 Y13.17653
G01 X-78.76719 Y13.12441
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.43511 Y13.66279 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.43511 Y13.66279
G01 X-78.47699 Y13.62090
G01 X-78.58271 Y13.49210
G01 X-78.63607 Y13.41224
G01 X-78.71464 Y13.26528
G01 X-78.75139 Y13.17653
G01 X-78.76719 Y13.12441
G01 X-78.76719 Y12.29355
G01 X-78.75139 Y12.24148
G01 X-78.71464 Y12.15276
G01 X-78.63607 Y12.00579
G01 X-78.58271 Y11.92594
G01 X-78.52218 Y11.85217
G01 X-78.48718 Y11.80953
G01 X-78.48718 Y11.49706
G01 X-79.57326 Y10.41098
G01 X-83.62367 Y10.41098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.90815 Y11.71953 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.90815 Y11.71953
G01 X-83.90535 Y11.71903
G01 X-83.89431 Y11.71903
G01 X-83.89128 Y11.70904
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.45588 Y11.37336 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.45588 Y11.37336
G01 X-83.45146 Y11.37140
G01 X-83.42720 Y11.36902
G01 X-81.72718 Y11.36902
G01 X-81.63160 Y11.37844
G01 X-81.53967 Y11.40630
G01 X-81.45497 Y11.45159
G01 X-81.38070 Y11.51253
G01 X-81.31976 Y11.58679
G01 X-81.27450 Y11.67150
G01 X-81.24661 Y11.76343
G01 X-81.23719 Y11.85901
G01 X-81.23716 Y12.12004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.23716 Y13.29797 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.23716 Y13.29797
G01 X-81.23719 Y13.55900
G01 X-81.24661 Y13.65461
G01 X-81.27450 Y13.74653
G01 X-81.31976 Y13.83124
G01 X-81.38070 Y13.90548
G01 X-81.45497 Y13.96644
G01 X-81.53967 Y14.01171
G01 X-81.63160 Y14.03960
G01 X-81.72718 Y14.04902
G01 X-83.42720 Y14.04902
G01 X-83.52278 Y14.03960
G01 X-83.61470 Y14.01171
G01 X-83.69941 Y13.96644
G01 X-83.77368 Y13.90548
G01 X-83.83462 Y13.83124
G01 X-83.87988 Y13.74653
G01 X-83.89431 Y13.69903
G01 X-89.58279 Y13.69903
G01 X-90.82871 Y14.94500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.64159 Y17.62176 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.64159 Y17.62176
G01 X-89.60240 Y17.61787
G01 X-89.50816 Y17.59910
G01 X-89.46127 Y17.58488
G01 X-89.37253 Y17.54815
G01 X-89.32932 Y17.52501
G01 X-89.24944 Y17.47164
G01 X-89.21157 Y17.44055
G01 X-89.14365 Y17.37264
G01 X-89.11253 Y17.33479
G01 X-89.07263 Y17.27502
G01 X-81.96322 Y17.27502
G01 X-81.91519 Y17.27266
G01 X-81.81763 Y17.26306
G01 X-81.72342 Y17.24431
G01 X-81.62962 Y17.21587
G01 X-81.54171 Y17.17944
G01 X-81.54105 Y17.17876
G01 X-81.46660 Y17.11013
G01 X-81.42974 Y17.07949
G01 X-81.39904 Y17.05282
G01 X-81.39759 Y17.05153
G01 X-81.34605 Y17.00807
G01 X-81.32332 Y16.98747
G01 X-81.29126 Y16.95696
G01 X-79.39523 Y15.06093
G01 X-79.36472 Y15.02890
G01 X-79.34433 Y15.00637
G01 X-79.30293 Y14.95278
G01 X-79.26429 Y14.89880
G01 X-79.25604 Y14.88603
G01 X-79.25279 Y14.87988
G01 X-79.20742 Y14.79299
G01 X-79.18789 Y14.75323
G01 X-79.17359 Y14.71127
G01 X-79.14420 Y14.61773
G01 X-79.14214 Y14.61107
G01 X-79.12812 Y14.53083
G01 X-79.11949 Y14.46357
G01 X-79.11799 Y14.43330
G01 X-79.11690 Y14.38900
G01 X-79.11690 Y14.26492
G01 X-79.10760 Y14.13546
G01 X-79.09754 Y14.06558
G01 X-79.05878 Y13.93645
G01 X-79.03219 Y13.89505
G01 X-78.96792 Y13.82763
G01 X-78.91512 Y13.78186
G01 X-78.83920 Y13.72779
G01 X-78.75441 Y13.68908
G01 X-78.66384 Y13.66711
G01 X-78.59470 Y13.65717
G01 X-78.51118 Y13.65240
G01 X-78.43940 Y13.66060
G01 X-78.43511 Y13.66279
G01 X-78.40176 Y13.67991
G01 X-78.35545 Y13.70528
G01 X-78.30646 Y13.73388
G01 X-78.25634 Y13.76538
G01 X-78.21911 Y13.79047
G01 X-78.18225 Y13.81404
G01 X-78.14733 Y13.83520
G01 X-78.03506 Y13.89220
G01 X-77.97278 Y13.92090
G01 X-77.95368 Y13.92697
G01 X-77.79437 Y13.97572
G01 X-77.78682 Y13.97798
G01 X-77.70722 Y13.99154
G01 X-77.69571 Y13.99296
G01 X-77.59434 Y14.00559
G01 X-77.54141 Y14.00818
G01 X-77.45294 Y14.00818
G01 X-77.40001 Y14.00559
G01 X-77.28713 Y13.99151
G01 X-77.27141 Y13.98943
G01 X-77.20748 Y13.97798
G01 X-77.19998 Y13.97572
G01 X-77.04067 Y13.92697
G01 X-77.02160 Y13.92090
G01 X-76.95929 Y13.89220
G01 X-76.84697 Y13.83518
G01 X-76.81210 Y13.81404
G01 X-76.73872 Y13.76451
G01 X-76.68657 Y13.72547
G01 X-76.61004 Y13.65867
G01 X-76.54626 Y13.59723
G01 X-76.54332 Y13.59408
G01 X-76.44121 Y13.46789
G01 X-76.42140 Y13.44247
G01 X-76.39242 Y13.39395
G01 X-76.32539 Y13.27335
G01 X-76.31335 Y13.24727
G01 X-76.28027 Y13.16528
G01 X-76.25490 Y13.09220
G01 X-76.23196 Y13.00579
G01 X-76.21347 Y12.91918
G01 X-76.21081 Y12.90290
G01 X-76.19785 Y12.75329
G01 X-76.19508 Y12.70902
G01 X-76.19785 Y12.66477
G01 X-76.21081 Y12.51516
G01 X-76.21347 Y12.49888
G01 X-76.23196 Y12.41224
G01 X-76.25490 Y12.32586
G01 X-76.28027 Y12.25276
G01 X-76.31337 Y12.17074
G01 X-76.32539 Y12.14471
G01 X-76.39242 Y12.02406
G01 X-76.42137 Y11.97559
G01 X-76.42302 Y11.97343
G01 X-76.44083 Y11.94986
G01 X-76.49714 Y11.86617
G01 X-76.52671 Y11.81659
G01 X-76.52922 Y11.80381
G01 X-76.54631 Y11.64946
G01 X-76.54662 Y11.63681
G01 X-76.54692 Y11.61420
G01 X-76.54692 Y11.08700
G01 X-76.54799 Y11.04265
G01 X-76.54949 Y11.01242
G01 X-76.55813 Y10.94517
G01 X-76.57370 Y10.85809
G01 X-76.57438 Y10.85512
G01 X-76.58015 Y10.83000
G01 X-76.59315 Y10.76157
G01 X-76.60278 Y10.69790
G01 X-76.60791 Y10.66724
G01 X-76.61114 Y10.64961
G01 X-76.60816 Y10.62675
G01 X-76.58749 Y10.53590
G01 X-76.54997 Y10.45063
G01 X-76.49701 Y10.37397
G01 X-76.45200 Y10.32053
G01 X-76.38553 Y10.25535
G01 X-76.30796 Y10.20392
G01 X-76.22203 Y10.16808
G01 X-76.15528 Y10.14743
G01 X-76.06399 Y10.12848
G01 X-75.97078 Y10.12716
G01 X-75.87901 Y10.14349
G01 X-75.83717 Y10.15515
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.47338 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.47338 Y4.43200
G01 X-74.12089 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.00740 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.00740 Y4.43200
G01 X-77.62091 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.50739 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.50739 Y4.43200
G01 X-81.12091 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.00739 Y4.43200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.00739 Y4.43200
G01 X-84.62090 Y4.43202
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.89925 Y8.21809 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.89925 Y8.21809
G01 X-85.68638 Y8.43097
G01 X-79.16320 Y8.43097
G01 X-79.11517 Y8.43333
G01 X-79.01761 Y8.44294
G01 X-78.92340 Y8.46168
G01 X-78.82960 Y8.49013
G01 X-78.74085 Y8.52688
G01 X-78.65441 Y8.57311
G01 X-78.57557 Y8.62579
G01 X-78.57456 Y8.62648
G01 X-78.49879 Y8.68865
G01 X-78.46315 Y8.72094
G01 X-76.79714 Y10.38695
G01 X-76.76486 Y10.42259
G01 X-76.70268 Y10.49835
G01 X-76.64931 Y10.57821
G01 X-76.61114 Y10.64961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.76719 Y12.29355 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.76719 Y12.29355
G01 X-78.78299 Y12.24148
G01 X-78.81974 Y12.15276
G01 X-78.89830 Y12.00579
G01 X-78.95167 Y11.92594
G01 X-79.05738 Y11.79711
G01 X-79.12530 Y11.72919
G01 X-79.25411 Y11.62350
G01 X-79.33396 Y11.57013
G01 X-79.48093 Y11.49157
G01 X-79.56968 Y11.45482
G01 X-79.72911 Y11.40645
G01 X-79.82332 Y11.38771
G01 X-79.98916 Y11.37138
G01 X-80.08522 Y11.37138
G01 X-80.25103 Y11.38771
G01 X-80.34527 Y11.40645
G01 X-80.50470 Y11.45482
G01 X-80.59345 Y11.49157
G01 X-80.74041 Y11.57013
G01 X-80.82027 Y11.62350
G01 X-80.85570 Y11.65256
G01 X-80.94907 Y11.72919
G01 X-81.01699 Y11.79711
G01 X-81.12271 Y11.92594
G01 X-81.17607 Y12.00579
G01 X-81.23716 Y12.12004
G01 X-81.24643 Y12.15713
G01 X-81.26485 Y12.24951
G01 X-81.28959 Y12.41613
G01 X-81.29797 Y12.50112
G01 X-81.30617 Y12.66777
G01 X-81.30617 Y12.75029
G01 X-81.29797 Y12.91692
G01 X-81.28959 Y13.00190
G01 X-81.26485 Y13.16853
G01 X-81.24646 Y13.26088
G01 X-81.23716 Y13.29797
G01 X-81.17607 Y13.41224
G01 X-81.12271 Y13.49210
G01 X-81.05718 Y13.57196
G01 X-81.05718 Y13.97892
G01 X-82.37328 Y15.29504
G01 X-89.07263 Y15.29504
G01 X-89.11253 Y15.23528
G01 X-89.14365 Y15.19740
G01 X-89.21157 Y15.12946
G01 X-89.24944 Y15.09837
G01 X-89.32932 Y15.04503
G01 X-89.37253 Y15.02189
G01 X-89.46127 Y14.98516
G01 X-89.50816 Y14.97091
G01 X-89.60240 Y14.95217
G01 X-89.65116 Y14.94739
G01 X-89.69920 Y14.94500
G01 X-90.82871 Y14.94500
G01 X-91.19919 Y15.09847
G01 X-91.23092 Y15.11252
G01 X-91.27798 Y15.13479
G01 X-91.33178 Y15.16352
G01 X-91.37511 Y15.18948
G01 X-91.42012 Y15.21953
G01 X-91.45992 Y15.24899
G01 X-91.49518 Y15.27764
G01 X-91.49764 Y15.28277
G01 X-91.52081 Y15.33177
G01 X-91.53864 Y15.37465
G01 X-91.55619 Y15.42369
G01 X-91.56739 Y15.46050
G01 X-91.57966 Y15.50955
G01 X-91.58614 Y15.54203
G01 X-91.59340 Y15.59105
G01 X-91.59640 Y15.62128
G01 X-91.59879 Y15.67030
G01 X-91.59914 Y15.68503
G01 X-91.59914 Y16.88501
G01 X-91.59879 Y16.89974
G01 X-91.59640 Y16.94876
G01 X-91.59340 Y16.97899
G01 X-91.58614 Y17.02801
G01 X-91.57963 Y17.06060
G01 X-91.56737 Y17.10957
G01 X-91.55619 Y17.14635
G01 X-91.53864 Y17.19539
G01 X-91.52081 Y17.23827
G01 X-91.49764 Y17.28732
G01 X-91.46978 Y17.33923
G01 X-91.44042 Y17.38828
G01 X-91.39706 Y17.45295
G01 X-91.36071 Y17.50195
G01 X-91.29267 Y17.58452
G01 X-91.25916 Y17.62148
G01 X-91.25911 Y17.62298
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25916 Y17.62148 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25916 Y17.62148
G01 X-91.25667 Y17.62176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25914 Y19.94703 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25914 Y19.94703
G01 X-91.25916 Y20.39211
G01 X-91.25916 Y26.80353
G01 X-89.70214 Y26.80353
G01 X-89.67215 Y26.76698
G01 X-89.60423 Y26.69906
G01 X-89.48299 Y26.59957
G01 X-89.40313 Y26.54620
G01 X-89.26481 Y26.47226
G01 X-89.17608 Y26.43551
G01 X-89.02599 Y26.38999
G01 X-88.93179 Y26.37125
G01 X-88.77570 Y26.35588
G01 X-88.67967 Y26.35588
G01 X-88.52358 Y26.37125
G01 X-88.42937 Y26.38999
G01 X-88.27931 Y26.43551
G01 X-88.19056 Y26.47226
G01 X-88.05223 Y26.54620
G01 X-87.97238 Y26.59957
G01 X-87.85114 Y26.69906
G01 X-87.78322 Y26.76698
G01 X-87.75323 Y26.80353
G01 X-86.88782 Y26.80353
G01 X-86.87769 Y26.77013
G01 X-86.84093 Y26.68138
G01 X-86.76699 Y26.54308
G01 X-86.71363 Y26.46319
G01 X-86.61414 Y26.34198
G01 X-86.54622 Y26.27404
G01 X-86.42498 Y26.17457
G01 X-86.34513 Y26.12121
G01 X-86.20682 Y26.04727
G01 X-86.11808 Y26.01051
G01 X-85.96799 Y25.96497
G01 X-85.87378 Y25.94625
G01 X-85.71772 Y25.93086
G01 X-85.62166 Y25.93086
G01 X-85.46558 Y25.94625
G01 X-85.37137 Y25.96497
G01 X-85.22130 Y26.01051
G01 X-85.13256 Y26.04727
G01 X-84.99425 Y26.12121
G01 X-84.91437 Y26.17457
G01 X-84.79316 Y26.27404
G01 X-84.72522 Y26.34198
G01 X-84.62572 Y26.46319
G01 X-84.57236 Y26.54308
G01 X-84.49844 Y26.68138
G01 X-84.46169 Y26.77013
G01 X-84.41615 Y26.92019
G01 X-84.39969 Y27.00297
G01 X-84.39969 Y28.23398
G01 X-84.38320 Y28.31683
G01 X-84.33769 Y28.46690
G01 X-84.30093 Y28.55565
G01 X-84.22699 Y28.69395
G01 X-84.18633 Y28.75481
G01 X-84.18633 Y28.75483
G01 X-84.16758 Y28.76888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.39969 Y28.23398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.39969 Y28.23398
G01 X-84.41615 Y28.31683
G01 X-84.46169 Y28.46690
G01 X-84.49844 Y28.55565
G01 X-84.57236 Y28.69395
G01 X-84.61450 Y28.75699
G01 X-84.63080 Y28.76967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.63408 Y33.64423 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.63408 Y33.64423
G01 X-84.53025 Y33.68726
G01 X-84.53022 Y33.68723
G01 X-84.45219 Y33.68388
G01 X-84.38303 Y33.67395
G01 X-84.29248 Y33.65200
G01 X-84.20772 Y33.61332
G01 X-84.13182 Y33.55929
G01 X-84.07901 Y33.51355
G01 X-84.01470 Y33.44611
G01 X-83.98806 Y33.40463
G01 X-83.96967 Y33.34342
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.85966 Y34.62297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.85966 Y34.62297
G01 X-81.84320 Y34.54019
G01 X-81.79769 Y34.39013
G01 X-81.76093 Y34.30138
G01 X-81.68699 Y34.16308
G01 X-81.63363 Y34.08319
G01 X-81.61468 Y34.06011
G01 X-81.53414 Y33.96198
G01 X-81.46622 Y33.89404
G01 X-81.34498 Y33.79457
G01 X-81.26513 Y33.74121
G01 X-81.12682 Y33.66727
G01 X-81.03808 Y33.63051
G01 X-80.88799 Y33.58497
G01 X-80.79378 Y33.56625
G01 X-80.63772 Y33.55086
G01 X-80.54166 Y33.55086
G01 X-80.38558 Y33.56625
G01 X-80.29137 Y33.58497
G01 X-80.14130 Y33.63051
G01 X-80.05256 Y33.66727
G01 X-79.91425 Y33.74121
G01 X-79.83437 Y33.79457
G01 X-79.71316 Y33.89404
G01 X-79.64522 Y33.96198
G01 X-79.54572 Y34.08319
G01 X-79.49236 Y34.16308
G01 X-79.41844 Y34.30138
G01 X-79.38169 Y34.39013
G01 X-79.33615 Y34.54019
G01 X-79.31969 Y34.62297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.31969 Y35.85398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.31969 Y35.85398
G01 X-79.30320 Y35.93683
G01 X-79.25769 Y36.08690
G01 X-79.22093 Y36.17565
G01 X-79.14699 Y36.31395
G01 X-79.09363 Y36.39383
G01 X-78.99414 Y36.51504
G01 X-78.98967 Y36.51954
G01 X-78.98967 Y36.71722
G01 X-79.08697 Y36.68047
G01 X-79.19904 Y36.66579
G01 X-79.26891 Y36.66477
G01 X-79.36180 Y36.67229
G01 X-79.45162 Y36.69726
G01 X-79.53506 Y36.73879
G01 X-79.59436 Y36.77572
G01 X-79.66838 Y36.83224
G01 X-79.73036 Y36.90173
G01 X-79.73188 Y36.90430
G01 X-79.76460 Y36.98809
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.85966 Y35.85398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.85966 Y35.85398
G01 X-81.87615 Y35.93683
G01 X-81.92169 Y36.08690
G01 X-81.95844 Y36.17565
G01 X-82.03236 Y36.31395
G01 X-82.08572 Y36.39383
G01 X-82.10467 Y36.41689
G01 X-82.18522 Y36.51504
G01 X-82.25316 Y36.58299
G01 X-82.37437 Y36.68245
G01 X-82.45425 Y36.73582
G01 X-82.59256 Y36.80976
G01 X-82.68130 Y36.84651
G01 X-82.83137 Y36.89205
G01 X-82.92558 Y36.91077
G01 X-83.08166 Y36.92616
G01 X-83.17772 Y36.92616
G01 X-83.33378 Y36.91077
G01 X-83.42799 Y36.89205
G01 X-83.57808 Y36.84651
G01 X-83.66682 Y36.80976
G01 X-83.80513 Y36.73582
G01 X-83.88498 Y36.68245
G01 X-84.00622 Y36.58299
G01 X-84.07414 Y36.51504
G01 X-84.17363 Y36.39383
G01 X-84.22699 Y36.31395
G01 X-84.30093 Y36.17565
G01 X-84.33769 Y36.08690
G01 X-84.34023 Y36.07852
G01 X-84.37967 Y36.07852
G01 X-84.37967 Y36.43851
G01 X-84.38910 Y36.53412
G01 X-84.41699 Y36.62604
G01 X-84.46227 Y36.71075
G01 X-84.52321 Y36.78499
G01 X-84.59745 Y36.84593
G01 X-84.67967 Y36.88987
G01 X-84.67967 Y38.02548
G01 X-84.68204 Y38.07351
G01 X-84.69164 Y38.17107
G01 X-84.71038 Y38.26528
G01 X-84.73883 Y38.35908
G01 X-84.77561 Y38.44783
G01 X-84.82181 Y38.53426
G01 X-84.87518 Y38.61412
G01 X-84.93736 Y38.68989
G01 X-84.96964 Y38.72553
G01 X-86.33715 Y40.09301
G01 X-86.37279 Y40.12532
G01 X-86.44855 Y40.18750
G01 X-86.52841 Y40.24086
G01 X-86.61487 Y40.28707
G01 X-86.70362 Y40.32382
G01 X-86.79740 Y40.35227
G01 X-86.89161 Y40.37101
G01 X-86.98917 Y40.38062
G01 X-87.03720 Y40.38298
G01 X-87.87908 Y40.38298
G01 X-87.89348 Y40.43050
G01 X-87.93877 Y40.51521
G01 X-87.99971 Y40.58945
G01 X-88.07395 Y40.65039
G01 X-88.15866 Y40.69568
G01 X-88.25058 Y40.72357
G01 X-88.34619 Y40.73296
G01 X-90.04619 Y40.73296
G01 X-90.14179 Y40.72357
G01 X-90.23371 Y40.69568
G01 X-90.31842 Y40.65039
G01 X-90.39267 Y40.58945
G01 X-90.45360 Y40.51521
G01 X-90.49889 Y40.43050
G01 X-90.52678 Y40.33858
G01 X-90.53618 Y40.24297
G01 X-90.53618 Y38.54298
G01 X-90.52678 Y38.44737
G01 X-90.49889 Y38.35545
G01 X-90.48629 Y38.33190
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25418 Y38.03681 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25418 Y38.03681
G01 X-91.25418 Y43.85348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25416 Y44.66460 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25416 Y44.66460
G01 X-91.25418 Y45.49938
G01 X-91.25418 Y45.85620
G01 X-91.24430 Y45.83232
G01 X-91.22119 Y45.78909
G01 X-91.16782 Y45.70923
G01 X-91.13673 Y45.67133
G01 X-91.06882 Y45.60341
G01 X-91.03094 Y45.57232
G01 X-90.95106 Y45.51896
G01 X-90.90786 Y45.49587
G01 X-90.81911 Y45.45909
G01 X-90.77219 Y45.44487
G01 X-90.67799 Y45.42615
G01 X-90.63872 Y45.42229
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.76809 Y38.40297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.76809 Y38.40297
G01 X-87.80895 Y38.39784
G01 X-87.85295 Y38.38318
G01 X-87.89255 Y38.36215
G01 X-87.89257 Y38.36215
G01 X-87.91779 Y38.33378
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-86.95224 Y33.96331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-86.95224 Y33.96331
G01 X-86.98284 Y33.90956
G01 X-87.03885 Y33.84250
G01 X-87.08825 Y33.79310
G01 X-87.16009 Y33.73382
G01 X-87.24182 Y33.68916
G01 X-87.33054 Y33.66079
G01 X-87.39882 Y33.64593
G01 X-87.49138 Y33.63488
G01 X-87.58437 Y33.64154
G01 X-87.67438 Y33.66567
G01 X-87.73984 Y33.69010
G01 X-87.86209 Y33.75688
G01 X-87.96341 Y33.83272
G01 X-88.14045 Y33.92940
G01 X-88.22358 Y33.96038
G01 X-88.26958 Y33.95124
G01 X-88.42567 Y33.93587
G01 X-88.52170 Y33.93587
G01 X-88.67779 Y33.95124
G01 X-88.71304 Y33.95825
G01 X-88.68594 Y33.93115
G01 X-88.67967 Y33.93115
G01 X-88.52358 Y33.91578
G01 X-88.42937 Y33.89704
G01 X-88.27931 Y33.85152
G01 X-88.19056 Y33.81477
G01 X-88.05223 Y33.74083
G01 X-87.97238 Y33.68746
G01 X-87.85114 Y33.58797
G01 X-87.78322 Y33.52005
G01 X-87.68373 Y33.39882
G01 X-87.63037 Y33.31896
G01 X-87.55645 Y33.18066
G01 X-87.51967 Y33.09191
G01 X-87.47416 Y32.94182
G01 X-87.45541 Y32.84761
G01 X-87.44004 Y32.69155
G01 X-87.44004 Y32.68525
G01 X-87.31970 Y32.56491
G01 X-87.31406 Y32.64352
G01 X-87.32846 Y32.84472
G01 X-87.34510 Y32.92122
G01 X-87.35574 Y33.00204
G01 X-87.35770 Y33.04311
G01 X-87.35046 Y33.15345
G01 X-87.31866 Y33.25937
G01 X-87.29115 Y33.32358
G01 X-87.24652 Y33.40532
G01 X-87.18721 Y33.47712
G01 X-87.12259 Y33.53049
G01 X-87.11541 Y33.53641
G01 X-87.05755 Y33.57557
G01 X-86.97581 Y33.62020
G01 X-86.88711 Y33.64857
G01 X-86.79463 Y33.65965
G01 X-86.77952 Y33.66003
G01 X-86.77566 Y33.65878
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.64906 Y31.23555 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.64906 Y31.23555
G01 X-88.72767 Y31.22991
G01 X-88.80631 Y31.23555
G01 X-88.72767 Y31.31416
G01 X-88.64906 Y31.23555
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.05703 Y32.64352 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.05703 Y32.64352
G01 X-90.16529 Y32.75180
G01 X-90.18848 Y32.70837
G01 X-90.22625 Y32.64959
G01 X-90.23074 Y32.64390
G01 X-90.20191 Y32.60131
G01 X-90.16844 Y32.53999
G01 X-90.16630 Y32.53425
G01 X-90.05703 Y32.64352
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25418 Y32.72165 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25418 Y32.72165
G01 X-91.24931 Y32.70077
G01 X-91.21177 Y32.64233
G01 X-91.23737 Y32.60811
G01 X-91.25236 Y32.57728
G01 X-91.25418 Y32.56986
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25916 Y28.74912 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25916 Y28.74912
G01 X-91.25916 Y28.48351
G01 X-90.99437 Y28.48351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-86.90342 Y28.48351 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-86.90342 Y28.48351
G01 X-86.87080 Y28.48351
G01 X-86.86024 Y28.50901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.39969 Y27.00297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.39969 Y27.00297
G01 X-84.38320 Y26.92019
G01 X-84.33769 Y26.77013
G01 X-84.30093 Y26.68138
G01 X-84.23368 Y26.55557
G01 X-84.23368 Y25.02197
G01 X-84.27023 Y24.99197
G01 X-84.33815 Y24.92406
G01 X-84.38582 Y24.86597
G01 X-87.60220 Y24.86597
G01 X-87.60220 Y24.87597
G01 X-87.61160 Y24.97158
G01 X-87.63948 Y25.06350
G01 X-87.68477 Y25.14821
G01 X-87.74571 Y25.22245
G01 X-87.81995 Y25.28339
G01 X-87.90466 Y25.32868
G01 X-87.99658 Y25.35657
G01 X-88.09219 Y25.36596
G01 X-89.79219 Y25.36596
G01 X-89.88779 Y25.35657
G01 X-89.97971 Y25.32868
G01 X-90.06442 Y25.28339
G01 X-90.13867 Y25.22245
G01 X-90.19960 Y25.14821
G01 X-90.24489 Y25.06350
G01 X-90.27278 Y24.97158
G01 X-90.28218 Y24.87597
G01 X-90.28218 Y23.17598
G01 X-90.27278 Y23.08037
G01 X-90.24489 Y22.98845
G01 X-90.19960 Y22.90374
G01 X-90.13867 Y22.82950
G01 X-90.06442 Y22.76856
G01 X-89.97971 Y22.72327
G01 X-89.88779 Y22.69538
G01 X-89.79219 Y22.68598
G01 X-88.09219 Y22.68598
G01 X-87.99658 Y22.69538
G01 X-87.90466 Y22.72327
G01 X-87.81995 Y22.76856
G01 X-87.74571 Y22.82950
G01 X-87.68477 Y22.90374
G01 X-87.63948 Y22.98845
G01 X-87.61160 Y23.08037
G01 X-87.60220 Y23.17598
G01 X-87.60220 Y23.18598
G01 X-84.35046 Y23.18598
G01 X-84.33815 Y23.17097
G01 X-84.27023 Y23.10305
G01 X-84.23368 Y23.07306
G01 X-84.23368 Y22.16452
G01 X-84.34620 Y22.16452
G01 X-84.44178 Y22.15510
G01 X-84.53370 Y22.12721
G01 X-84.61841 Y22.08192
G01 X-84.69268 Y22.02099
G01 X-84.75361 Y21.94674
G01 X-84.79888 Y21.86203
G01 X-84.82677 Y21.77011
G01 X-84.83619 Y21.67451
G01 X-84.83616 Y19.77502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.95118 Y21.65129 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.95118 Y21.65129
G01 X-81.95118 Y21.67451
G01 X-81.96060 Y21.77011
G01 X-81.98849 Y21.86203
G01 X-82.03376 Y21.94674
G01 X-82.09472 Y22.02099
G01 X-82.10074 Y22.02594
G01 X-82.16896 Y22.08192
G01 X-82.25367 Y22.12721
G01 X-82.34559 Y22.15510
G01 X-82.44120 Y22.16452
G01 X-82.55369 Y22.16452
G01 X-82.55369 Y23.07306
G01 X-82.51714 Y23.10305
G01 X-82.44922 Y23.17097
G01 X-82.34973 Y23.29221
G01 X-82.29637 Y23.37206
G01 X-82.22245 Y23.51039
G01 X-82.18567 Y23.59912
G01 X-82.14016 Y23.74920
G01 X-82.12141 Y23.84341
G01 X-82.10604 Y23.99950
G01 X-82.10604 Y24.09553
G01 X-82.12141 Y24.25162
G01 X-82.14016 Y24.34582
G01 X-82.18567 Y24.49589
G01 X-82.22245 Y24.58463
G01 X-82.29637 Y24.72296
G01 X-82.34973 Y24.80282
G01 X-82.44922 Y24.92406
G01 X-82.51714 Y24.99197
G01 X-82.55369 Y25.02195
G01 X-82.55369 Y26.06805
G01 X-82.45425 Y26.12121
G01 X-82.37437 Y26.17457
G01 X-82.25316 Y26.27404
G01 X-82.18522 Y26.34198
G01 X-82.08572 Y26.46319
G01 X-82.03236 Y26.54308
G01 X-81.95844 Y26.68138
G01 X-81.92169 Y26.77013
G01 X-81.87615 Y26.92019
G01 X-81.85966 Y27.00297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.85966 Y28.23398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.85966 Y28.23398
G01 X-81.87615 Y28.31683
G01 X-81.92169 Y28.46690
G01 X-81.95844 Y28.55565
G01 X-82.03236 Y28.69395
G01 X-82.07450 Y28.75699
G01 X-82.09080 Y28.76967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.62758 Y28.76888 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.62758 Y28.76888
G01 X-81.64633 Y28.75483
G01 X-81.64633 Y28.75481
G01 X-81.68699 Y28.69395
G01 X-81.76093 Y28.55565
G01 X-81.79769 Y28.46690
G01 X-81.84320 Y28.31683
G01 X-81.85966 Y28.23398
G01 X-81.85966 Y27.00297
G01 X-81.84320 Y26.92019
G01 X-81.79769 Y26.77013
G01 X-81.76093 Y26.68138
G01 X-81.68699 Y26.54308
G01 X-81.63363 Y26.46319
G01 X-81.61468 Y26.44011
G01 X-81.53414 Y26.34198
G01 X-81.46622 Y26.27404
G01 X-81.42967 Y26.24407
G01 X-81.42967 Y24.94448
G01 X-81.42731 Y24.89647
G01 X-81.42060 Y24.82817
G01 X-81.40185 Y24.73396
G01 X-81.38194 Y24.66830
G01 X-81.34519 Y24.57958
G01 X-81.31283 Y24.51905
G01 X-81.25946 Y24.43919
G01 X-81.21595 Y24.38616
G01 X-81.18364 Y24.35052
G01 X-78.87953 Y22.04644
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.58367 Y21.39630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.58367 Y21.39630
G01 X-79.62957 Y21.48218
G01 X-79.68293 Y21.56204
G01 X-79.80140 Y21.70638
G01 X-79.86932 Y21.77430
G01 X-80.01364 Y21.89277
G01 X-80.09353 Y21.94613
G01 X-80.25819 Y22.03414
G01 X-80.34694 Y22.07090
G01 X-80.52563 Y22.12510
G01 X-80.61984 Y22.14385
G01 X-80.80567 Y22.16216
G01 X-80.90170 Y22.16216
G01 X-81.08753 Y22.14385
G01 X-81.18174 Y22.12510
G01 X-81.36043 Y22.07090
G01 X-81.44917 Y22.03414
G01 X-81.61384 Y21.94613
G01 X-81.69373 Y21.89277
G01 X-81.83805 Y21.77430
G01 X-81.90597 Y21.70638
G01 X-81.95118 Y21.65129
G01 X-81.99251 Y21.53585
G01 X-82.01846 Y21.45045
G01 X-82.06523 Y21.26374
G01 X-82.07965 Y21.19147
G01 X-82.10734 Y21.00476
G01 X-82.11374 Y20.93996
G01 X-82.12291 Y20.75322
G01 X-82.12370 Y20.72203
G01 X-82.12370 Y20.62704
G01 X-82.12291 Y20.59582
G01 X-82.11374 Y20.40908
G01 X-82.10734 Y20.34428
G01 X-82.07965 Y20.15757
G01 X-82.06523 Y20.08530
G01 X-82.01846 Y19.89859
G01 X-82.01145 Y19.87233
G01 X-82.09339 Y19.67451
G01 X-82.12487 Y19.60822
G01 X-82.44117 Y19.47977
G01 X-84.34620 Y19.47977
G01 X-84.73568 Y19.67451
G01 X-84.83616 Y19.77502
G01 X-89.39970 Y19.77502
G01 X-89.51609 Y19.87055
G01 X-89.59597 Y19.92391
G01 X-89.74291 Y20.00245
G01 X-89.83166 Y20.03920
G01 X-89.99112 Y20.08759
G01 X-90.08533 Y20.10631
G01 X-90.25116 Y20.12264
G01 X-90.29919 Y20.12500
G01 X-90.59919 Y20.12500
G01 X-90.64723 Y20.12264
G01 X-90.81304 Y20.10631
G01 X-90.90725 Y20.08759
G01 X-91.06671 Y20.03920
G01 X-91.15545 Y20.00245
G01 X-91.25914 Y19.94703
G01 X-91.28855 Y19.89795
G01 X-91.33447 Y19.81228
G01 X-91.41329 Y19.64566
G01 X-91.43955 Y19.58244
G01 X-91.49917 Y19.41581
G01 X-91.51362 Y19.36831
G01 X-91.55535 Y19.20169
G01 X-91.56279 Y19.16440
G01 X-91.58751 Y18.99775
G01 X-91.59061 Y18.96638
G01 X-91.59879 Y18.79978
G01 X-91.59879 Y18.77027
G01 X-91.59061 Y18.60370
G01 X-91.58751 Y18.57230
G01 X-91.56279 Y18.40565
G01 X-91.55538 Y18.36839
G01 X-91.51362 Y18.20174
G01 X-91.49917 Y18.15422
G01 X-91.43955 Y17.98762
G01 X-91.41326 Y17.92435
G01 X-91.33447 Y17.75772
G01 X-91.28855 Y17.67210
G01 X-91.25911 Y17.62298
G01 X-91.25667 Y17.62176
G01 X-91.24689 Y17.61980
G01 X-91.19917 Y17.60906
G01 X-91.14108 Y17.59450
G01 X-91.05269 Y17.57688
G01 X-90.88606 Y17.55219
G01 X-90.80511 Y17.54419
G01 X-90.63849 Y17.53603
G01 X-90.59919 Y17.53502
G01 X-90.29919 Y17.53502
G01 X-90.25988 Y17.53603
G01 X-90.09325 Y17.54419
G01 X-90.01228 Y17.55219
G01 X-89.84565 Y17.57688
G01 X-89.75724 Y17.59453
G01 X-89.69917 Y17.60906
G01 X-89.65149 Y17.61980
G01 X-89.64159 Y17.62176
G01 X-89.59597 Y17.64612
G01 X-89.51609 Y17.69948
G01 X-89.39970 Y17.79501
G01 X-81.78392 Y17.79501
G01 X-81.73589 Y17.79737
G01 X-81.63833 Y17.80698
G01 X-81.54412 Y17.82575
G01 X-81.48799 Y17.84276
G01 X-81.45392 Y17.86603
G01 X-81.43472 Y17.87776
G01 X-81.37551 Y17.91711
G01 X-81.29276 Y17.97020
G01 X-81.22012 Y18.02079
G01 X-81.16652 Y18.06222
G01 X-81.14402 Y18.08259
G01 X-81.11196 Y18.11312
G01 X-81.03089 Y18.19417
G01 X-80.18535 Y19.03971
G01 X-80.18174 Y19.04335
G01 X-80.15121 Y19.07540
G01 X-80.13086 Y19.09788
G01 X-80.08944 Y19.15150
G01 X-80.05431 Y19.20024
G01 X-80.03841 Y19.22394
G01 X-79.99332 Y19.28543
G01 X-79.97905 Y19.30334
G01 X-79.95827 Y19.33034
G01 X-79.92794 Y19.37123
G01 X-79.92789 Y19.37126
G01 X-79.90074 Y19.39105
G01 X-79.82581 Y19.42803
G01 X-79.74570 Y19.45175
G01 X-79.67727 Y19.46580
G01 X-79.58461 Y19.47576
G01 X-79.49175 Y19.46803
G01 X-79.40204 Y19.44284
G01 X-79.33686 Y19.41764
G01 X-79.25367 Y19.37090
G01 X-79.25367 Y19.53829
G01 X-79.29805 Y19.57471
G01 X-79.34143 Y19.61807
G01 X-79.36597 Y19.64263
G01 X-79.48443 Y19.78698
G01 X-79.53780 Y19.86684
G01 X-79.58367 Y19.95267
G01 X-79.58367 Y20.59574
G01 X-79.58370 Y20.62704
G01 X-79.58370 Y20.72203
G01 X-79.58367 Y20.75330
G01 X-79.58367 Y21.39630
G01 X-79.53780 Y21.48218
G01 X-79.48443 Y21.56204
G01 X-79.36597 Y21.70638
G01 X-79.29805 Y21.77430
G01 X-79.20826 Y21.84799
G01 X-79.15373 Y21.89277
G01 X-79.07384 Y21.94613
G01 X-78.90917 Y22.03414
G01 X-78.87953 Y22.04644
G01 X-78.80874 Y22.03247
G01 X-78.59757 Y21.97956
G01 X-78.52929 Y21.95896
G01 X-78.46074 Y21.93442
G01 X-78.43353 Y21.92543
G01 X-78.36247 Y21.90387
G01 X-78.33554 Y21.89650
G01 X-78.31718 Y21.89208
G01 X-78.29292 Y21.88548
G01 X-78.24989 Y21.87242
G01 X-78.21141 Y21.86277
G01 X-78.14377 Y21.84931
G01 X-78.10938 Y21.84410
G01 X-78.10699 Y21.84385
G01 X-78.07252 Y21.83862
G01 X-78.03922 Y21.83199
G01 X-78.02017 Y21.82868
G01 X-77.88642 Y21.80885
G01 X-77.84321 Y21.80024
G01 X-77.65647 Y21.75345
G01 X-77.60168 Y21.73679
G01 X-77.41497 Y21.66998
G01 X-77.34245 Y21.63986
G01 X-77.25767 Y21.59978
G01 X-75.53232 Y21.59978
G01 X-75.49046 Y21.59874
G01 X-75.39242 Y21.59391
G01 X-75.30720 Y21.58550
G01 X-75.23463 Y21.57473
G01 X-70.57376 Y21.57473
G01 X-70.55821 Y21.57461
G01 X-70.54937 Y21.57446
G01 X-70.40226 Y21.55990
G01 X-70.33238 Y21.54728
G01 X-70.24242 Y21.51665
G01 X-70.16985 Y21.46231
G01 X-70.10724 Y21.39346
G01 X-70.06535 Y21.33752
G01 X-70.01684 Y21.25795
G01 X-69.98428 Y21.17065
G01 X-69.96881 Y21.07872
G01 X-69.96383 Y21.00905
G01 X-69.96606 Y20.91599
G01 X-69.97655 Y20.86773
G01 X-70.00675 Y20.81157
G01 X-70.04036 Y20.74916
G01 X-70.08265 Y20.69264
G01 X-70.16769 Y20.59442
G01 X-70.85598 Y19.90616
G01 X-72.56865 Y18.19346
G01 X-72.59915 Y18.16146
G01 X-72.63319 Y18.12389
G01 X-72.72361 Y18.00997
G01 X-72.75031 Y17.97456
G01 X-72.77279 Y17.93636
G01 X-72.84345 Y17.80924
G01 X-72.86509 Y17.76346
G01 X-72.89898 Y17.68168
G01 X-72.91599 Y17.63405
G01 X-72.95597 Y17.49410
G01 X-72.96707 Y17.45122
G01 X-72.97322 Y17.40736
G01 X-72.98986 Y17.26281
G01 X-72.99235 Y17.21223
G01 X-72.99344 Y17.16796
G01 X-72.99344 Y13.18054
G01 X-72.99473 Y13.13208
G01 X-72.99616 Y13.10559
G01 X-73.01734 Y12.95260
G01 X-73.03428 Y12.92924
G01 X-73.07660 Y12.87272
G01 X-73.16161 Y12.77450
G01 X-74.74330 Y11.19284
G01 X-75.60265 Y10.33348
G01 X-75.64002 Y10.29818
G01 X-75.66115 Y10.27933
G01 X-75.81355 Y10.16894
G01 X-75.83717 Y10.15515
G01 X-76.61776 Y9.37456
G01 X-76.65007 Y9.33895
G01 X-76.77443 Y9.18741
G01 X-76.82780 Y9.10753
G01 X-76.92020 Y8.93465
G01 X-76.95696 Y8.84591
G01 X-77.01388 Y8.65830
G01 X-77.03262 Y8.56409
G01 X-77.05183 Y8.36900
G01 X-77.05419 Y8.32096
G01 X-77.05419 Y7.49501
G01 X-77.06488 Y7.48198
G01 X-77.56351 Y7.48198
G01 X-77.69546 Y7.64278
G01 X-77.76338 Y7.71070
G01 X-77.97555 Y7.88480
G01 X-78.05540 Y7.93819
G01 X-78.29744 Y8.06755
G01 X-78.38619 Y8.10430
G01 X-78.64882 Y8.18398
G01 X-78.74303 Y8.20273
G01 X-79.01616 Y8.22963
G01 X-79.11222 Y8.22963
G01 X-79.38535 Y8.20273
G01 X-79.47956 Y8.18398
G01 X-79.74219 Y8.10430
G01 X-79.83094 Y8.06755
G01 X-80.04024 Y7.95566
G01 X-80.07298 Y7.93819
G01 X-80.15283 Y7.88480
G01 X-80.36500 Y7.71070
G01 X-80.43292 Y7.64278
G01 X-80.56487 Y7.48198
G01 X-81.06350 Y7.48198
G01 X-81.19545 Y7.64278
G01 X-81.26337 Y7.71070
G01 X-81.47554 Y7.88480
G01 X-81.55540 Y7.93819
G01 X-81.79743 Y8.06755
G01 X-81.88618 Y8.10430
G01 X-82.14882 Y8.18398
G01 X-82.24303 Y8.20273
G01 X-82.51615 Y8.22963
G01 X-82.61222 Y8.22963
G01 X-82.88534 Y8.20273
G01 X-82.97955 Y8.18398
G01 X-83.24219 Y8.10430
G01 X-83.33093 Y8.06755
G01 X-83.54023 Y7.95566
G01 X-83.57297 Y7.93819
G01 X-83.65283 Y7.88480
G01 X-83.86499 Y7.71070
G01 X-83.93291 Y7.64278
G01 X-84.06487 Y7.48198
G01 X-84.56349 Y7.48198
G01 X-84.69547 Y7.64278
G01 X-84.76339 Y7.71070
G01 X-84.97553 Y7.88480
G01 X-85.05542 Y7.93819
G01 X-85.29745 Y8.06755
G01 X-85.38620 Y8.10430
G01 X-85.64881 Y8.18398
G01 X-85.74304 Y8.20273
G01 X-85.89925 Y8.21809
G01 X-86.02158 Y8.17433
G01 X-86.10342 Y8.14055
G01 X-86.36692 Y8.01591
G01 X-86.41995 Y7.98761
G01 X-86.66263 Y7.84217
G01 X-86.69788 Y7.81865
G01 X-86.92072 Y7.65338
G01 X-86.94591 Y7.63270
G01 X-87.14952 Y7.44817
G01 X-87.17037 Y7.42732
G01 X-87.35488 Y7.22374
G01 X-87.37555 Y7.19854
G01 X-87.54083 Y6.97570
G01 X-87.55285 Y6.95864
G01 X-87.55640 Y6.93804
G01 X-87.59712 Y6.66359
G01 X-87.60032 Y6.63118
G01 X-87.61381 Y6.35673
G01 X-87.61419 Y6.34197
G01 X-87.61419 Y5.64198
G01 X-87.61381 Y5.62724
G01 X-87.60032 Y5.35280
G01 X-87.59712 Y5.32039
G01 X-87.55640 Y5.04594
G01 X-87.55285 Y5.02536
G01 X-87.54083 Y5.00830
G01 X-87.37553 Y4.78544
G01 X-87.35488 Y4.76024
G01 X-87.17035 Y4.55666
G01 X-87.14952 Y4.53583
G01 X-86.94589 Y4.35127
G01 X-86.92072 Y4.33062
G01 X-86.69786 Y4.16535
G01 X-86.68081 Y4.15333
G01 X-86.66021 Y4.14975
G01 X-86.38577 Y4.10906
G01 X-86.35336 Y4.10586
G01 X-86.07891 Y4.09237
G01 X-86.04942 Y4.09237
G01 X-85.77497 Y4.10586
G01 X-85.74256 Y4.10906
G01 X-85.46814 Y4.14975
G01 X-85.42659 Y4.15803
G01 X-85.15211 Y4.22679
G01 X-85.09461 Y4.24429
G01 X-84.82016 Y4.34249
G01 X-84.73842 Y4.37645
G01 X-84.62090 Y4.43202
G01 X-84.56349 Y4.50197
G01 X-84.06487 Y4.50197
G01 X-84.00739 Y4.43200
G01 X-83.88996 Y4.37645
G01 X-83.80817 Y4.34249
G01 X-83.53373 Y4.24429
G01 X-83.47622 Y4.22679
G01 X-83.20177 Y4.15803
G01 X-83.16022 Y4.14975
G01 X-82.88577 Y4.10906
G01 X-82.85336 Y4.10586
G01 X-82.57892 Y4.09237
G01 X-82.54943 Y4.09237
G01 X-82.27498 Y4.10586
G01 X-82.24257 Y4.10906
G01 X-81.96812 Y4.14975
G01 X-81.92657 Y4.15803
G01 X-81.65212 Y4.22679
G01 X-81.59462 Y4.24429
G01 X-81.32017 Y4.34249
G01 X-81.23843 Y4.37645
G01 X-81.12091 Y4.43202
G01 X-81.06350 Y4.50197
G01 X-80.56487 Y4.50197
G01 X-80.50739 Y4.43200
G01 X-80.38992 Y4.37645
G01 X-80.30818 Y4.34249
G01 X-80.03373 Y4.24429
G01 X-79.97623 Y4.22679
G01 X-79.70178 Y4.15803
G01 X-79.66023 Y4.14975
G01 X-79.38578 Y4.10906
G01 X-79.35337 Y4.10586
G01 X-79.07892 Y4.09237
G01 X-79.04943 Y4.09237
G01 X-78.77499 Y4.10586
G01 X-78.74258 Y4.10906
G01 X-78.46813 Y4.14975
G01 X-78.42657 Y4.15803
G01 X-78.15213 Y4.22679
G01 X-78.09462 Y4.24429
G01 X-77.82018 Y4.34249
G01 X-77.73839 Y4.37645
G01 X-77.62091 Y4.43202
G01 X-77.56351 Y4.50197
G01 X-77.06488 Y4.50197
G01 X-77.00740 Y4.43200
G01 X-76.88993 Y4.37645
G01 X-76.80819 Y4.34249
G01 X-76.53374 Y4.24429
G01 X-76.47624 Y4.22679
G01 X-76.20176 Y4.15803
G01 X-76.16021 Y4.14975
G01 X-75.88579 Y4.10906
G01 X-75.85338 Y4.10586
G01 X-75.57893 Y4.09237
G01 X-75.54944 Y4.09237
G01 X-75.27499 Y4.10586
G01 X-75.24258 Y4.10906
G01 X-74.96814 Y4.14975
G01 X-74.92658 Y4.15803
G01 X-74.65213 Y4.22679
G01 X-74.59463 Y4.24429
G01 X-74.32018 Y4.34249
G01 X-74.23839 Y4.37645
G01 X-74.12089 Y4.43202
G01 X-74.02135 Y4.55333
G01 X-73.96799 Y4.63319
G01 X-73.83862 Y4.87523
G01 X-73.80184 Y4.96397
G01 X-73.72219 Y5.22661
G01 X-73.70344 Y5.32082
G01 X-73.67655 Y5.59394
G01 X-73.67418 Y5.64198
G01 X-73.67418 Y6.34197
G01 X-73.67655 Y6.39001
G01 X-73.70344 Y6.66313
G01 X-73.72219 Y6.75734
G01 X-73.80184 Y7.01998
G01 X-73.83862 Y7.10872
G01 X-73.96799 Y7.35076
G01 X-74.02135 Y7.43062
G01 X-74.07418 Y7.49501
G01 X-74.07418 Y7.70379
G01 X-70.48961 Y11.28840
G01 X-70.45730 Y11.32401
G01 X-70.33294 Y11.47554
G01 X-70.27958 Y11.55543
G01 X-70.18717 Y11.72830
G01 X-70.15042 Y11.81705
G01 X-70.09350 Y12.00465
G01 X-70.07475 Y12.09886
G01 X-70.05555 Y12.29396
G01 X-70.05319 Y12.34196
G01 X-70.05319 Y16.55079
G01 X-69.52017 Y17.08381
G01 X-69.45049 Y17.25201
G01 X-69.43292 Y17.29171
G01 X-69.34389 Y17.47990
G01 X-69.31257 Y17.53857
G01 X-69.20869 Y17.71195
G01 X-69.17970 Y17.75534
G01 X-69.06167 Y17.91452
G01 X-69.03360 Y17.94873
G01 X-68.90178 Y18.09417
G01 X-68.88740 Y18.10926
G01 X-67.29881 Y19.69783
G01 X-67.28431 Y19.70860
G01 X-67.25266 Y19.73456
G01 X-67.10724 Y19.86638
G01 X-67.09332 Y19.87962
G01 X-59.93078 Y27.04216
G01 X-59.91754 Y27.05608
G01 X-59.78572 Y27.20150
G01 X-59.75976 Y27.23314
G01 X-59.70048 Y27.31310
G01 X-59.67604 Y27.41064
G01 X-59.66837 Y27.44909
G01 X-59.63929 Y27.64513
G01 X-59.63616 Y27.67678
G01 X-59.62654 Y27.87279
G01 X-59.62618 Y27.88755
G01 X-59.62618 Y37.21997
G01 X-59.62580 Y37.23472
G01 X-59.61617 Y37.43076
G01 X-59.61305 Y37.46241
G01 X-59.58397 Y37.65845
G01 X-59.57629 Y37.69690
G01 X-59.56992 Y37.72235
G01 X-59.46723 Y37.86086
G01 X-59.44482 Y37.88814
G01 X-59.31300 Y38.03358
G01 X-59.30167 Y38.04549
G01 X-58.42667 Y38.92050
G01 X-58.41534 Y38.93241
G01 X-58.28351 Y39.07785
G01 X-58.26111 Y39.10513
G01 X-58.15842 Y39.24364
G01 X-58.15204 Y39.26909
G01 X-58.14437 Y39.30754
G01 X-58.11529 Y39.50358
G01 X-58.11216 Y39.53523
G01 X-58.10254 Y39.73124
G01 X-58.10218 Y39.74597
G01 X-58.10218 Y46.45530
G01 X-58.10254 Y46.47004
G01 X-58.11216 Y46.66607
G01 X-58.11529 Y46.69772
G01 X-58.14437 Y46.89376
G01 X-58.14767 Y46.91281
G01 X-58.15880 Y46.92858
G01 X-58.27683 Y47.08776
G01 X-58.29702 Y47.11238
G01 X-58.38867 Y47.21347
G01 X-58.39850 Y47.22485
G01 X-58.42687 Y47.25942
G01 X-58.43667 Y47.27080
G01 X-58.52832 Y47.37191
G01 X-58.54848 Y47.39650
G01 X-58.66654 Y47.55568
G01 X-58.68831 Y47.58830
G01 X-58.79220 Y47.76165
G01 X-58.80921 Y47.79231
G01 X-58.81028 Y47.80864
G01 X-58.81991 Y48.00465
G01 X-58.82052 Y48.02896
G01 X-58.82052 Y50.84079
G01 X-58.84754 Y51.02322
G01 X-58.85176 Y51.06594
G01 X-58.86382 Y51.31097
G01 X-58.86382 Y51.35098
G01 X-58.85179 Y51.59604
G01 X-58.84754 Y51.63876
G01 X-58.81122 Y51.88382
G01 X-58.80099 Y51.93513
G01 X-58.73959 Y52.18019
G01 X-58.71943 Y52.24648
G01 X-58.63175 Y52.49151
G01 X-58.61493 Y52.53513
G01 X-58.57782 Y52.62469
G01 X-55.78349 Y55.41902
G01 X-55.69954 Y55.44005
G01 X-55.60955 Y55.46722
G01 X-55.44623 Y55.52567
G01 X-55.38466 Y55.55110
G01 X-55.23406 Y55.62232
G01 X-55.19104 Y55.64528
G01 X-55.05235 Y55.72839
G01 X-55.02106 Y55.74929
G01 X-54.89373 Y55.84373
G01 X-54.86942 Y55.86367
G01 X-54.75309 Y55.96910
G01 X-54.73224 Y55.98996
G01 X-54.62680 Y56.10629
G01 X-54.60684 Y56.13062
G01 X-54.51242 Y56.25795
G01 X-54.49155 Y56.28922
G01 X-54.40844 Y56.42788
G01 X-54.38550 Y56.47088
G01 X-54.31425 Y56.62145
G01 X-54.28880 Y56.68312
G01 X-54.23036 Y56.84647
G01 X-54.20320 Y56.93639
G01 X-54.18217 Y57.02033
G01 X-54.20618 Y57.09940
G01 X-54.24293 Y57.18815
G01 X-54.31687 Y57.32645
G01 X-54.35901 Y57.38952
G01 X-54.37023 Y57.40631
G01 X-54.46973 Y57.52755
G01 X-54.53765 Y57.59547
G01 X-54.65888 Y57.69496
G01 X-54.73874 Y57.74832
G01 X-54.87707 Y57.82226
G01 X-54.96579 Y57.85902
G01 X-55.11588 Y57.90453
G01 X-55.21009 Y57.92328
G01 X-55.36617 Y57.93865
G01 X-55.46221 Y57.93865
G01 X-55.49655 Y57.93527
G01 X-55.54463 Y57.98335
G01 X-53.28797 Y60.24001
G01 X-45.27744 Y60.24001
G01 X-45.18239 Y60.18921
G01 X-45.09365 Y60.15246
G01 X-44.86853 Y60.08416
G01 X-44.77432 Y60.06544
G01 X-44.67851 Y60.05599
G01 X-44.67813 Y60.05596
G01 X-44.53957 Y60.04916
G01 X-44.44483 Y60.04916
G01 X-44.30622 Y60.05596
G01 X-44.30587 Y60.05599
G01 X-44.21006 Y60.06544
G01 X-44.11585 Y60.08416
G01 X-43.89073 Y60.15246
G01 X-43.80198 Y60.18921
G01 X-43.59451 Y60.30011
G01 X-43.51466 Y60.35347
G01 X-43.33282 Y60.50270
G01 X-43.26487 Y60.57064
G01 X-43.11565 Y60.75248
G01 X-43.06228 Y60.83234
G01 X-42.95139 Y61.03981
G01 X-42.91463 Y61.12855
G01 X-42.84636 Y61.35367
G01 X-42.82761 Y61.44788
G01 X-42.80455 Y61.68200
G01 X-42.80455 Y61.77803
G01 X-42.82761 Y62.01214
G01 X-42.84636 Y62.10635
G01 X-42.91463 Y62.33147
G01 X-42.95139 Y62.42022
G01 X-42.98214 Y62.47775
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-43.74447 Y63.24006 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-43.74447 Y63.24006
G01 X-43.60640 Y63.13767
G01 X-43.53630 Y63.08016
G01 X-43.36180 Y62.92200
G01 X-43.30023 Y62.86043
G01 X-43.14204 Y62.68593
G01 X-43.08451 Y62.61578
G01 X-42.98199 Y62.47755
G01 X-42.80318 Y62.29873
G01 X-42.80318 Y60.05596
G01 X-44.30622 Y60.05596
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.67813 Y60.05596 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.67813 Y60.05596
G01 X-50.42582 Y60.05596
G01 X-50.47382 Y60.05363
G01 X-50.71769 Y60.02960
G01 X-50.81190 Y60.01085
G01 X-51.04639 Y59.93973
G01 X-51.13514 Y59.90295
G01 X-51.35124 Y59.78746
G01 X-51.38020 Y59.76811
G01 X-51.43112 Y59.73409
G01 X-51.62053 Y59.57862
G01 X-51.65617 Y59.54634
G01 X-54.18217 Y57.02033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.62713 Y52.63408 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.62713 Y52.63408
G01 X-52.63486 Y52.66527
G01 X-52.63483 Y52.66527
G01 X-52.62246 Y52.79111
G01 X-52.60372 Y52.88531
G01 X-52.55820 Y53.03540
G01 X-52.52144 Y53.12415
G01 X-52.44751 Y53.26245
G01 X-52.39414 Y53.34231
G01 X-52.29465 Y53.46355
G01 X-52.22673 Y53.53147
G01 X-52.10549 Y53.63096
G01 X-52.02564 Y53.68432
G01 X-51.88731 Y53.75826
G01 X-51.79859 Y53.79502
G01 X-51.64850 Y53.84053
G01 X-51.55429 Y53.85928
G01 X-51.39821 Y53.87464
G01 X-51.30217 Y53.87464
G01 X-51.14609 Y53.85928
G01 X-51.05188 Y53.84053
G01 X-50.90179 Y53.79502
G01 X-50.81307 Y53.75826
G01 X-50.67474 Y53.68432
G01 X-50.59488 Y53.63096
G01 X-50.47365 Y53.53147
G01 X-50.40573 Y53.46355
G01 X-50.37575 Y53.42702
G01 X-46.89123 Y53.42702
G01 X-46.84320 Y53.42466
G01 X-46.77490 Y53.41795
G01 X-46.68069 Y53.39921
G01 X-46.61503 Y53.37929
G01 X-46.52628 Y53.34254
G01 X-46.46578 Y53.31018
G01 X-46.38592 Y53.25682
G01 X-46.33289 Y53.21331
G01 X-46.29725 Y53.18100
G01 X-42.29622 Y49.17996
G01 X-42.26391 Y49.14433
G01 X-42.22040 Y49.09129
G01 X-42.16703 Y49.01143
G01 X-42.13467 Y48.95093
G01 X-42.09792 Y48.86218
G01 X-42.07801 Y48.79652
G01 X-42.05926 Y48.70232
G01 X-42.05256 Y48.63402
G01 X-42.05019 Y48.58598
G01 X-42.05019 Y43.11320
G01 X-41.94293 Y43.02519
G01 X-41.87501 Y42.95727
G01 X-41.76310 Y42.82087
G01 X-41.70973 Y42.74101
G01 X-41.62655 Y42.58541
G01 X-41.58979 Y42.49666
G01 X-41.53859 Y42.32783
G01 X-41.51984 Y42.23362
G01 X-41.50254 Y42.05803
G01 X-41.50254 Y41.96199
G01 X-41.51616 Y41.82392
G01 X-40.68720 Y40.99497
G01 X-40.57839 Y40.99497
G01 X-40.57461 Y40.99319
G01 X-40.48278 Y40.95504
G01 X-40.28675 Y40.88488
G01 X-40.21443 Y40.86289
G01 X-40.01842 Y40.81379
G01 X-39.95904 Y40.80195
G01 X-39.76297 Y40.77287
G01 X-39.71101 Y40.76774
G01 X-39.51499 Y40.75811
G01 X-39.49018 Y40.75750
G01 X-36.41416 Y40.75750
G01 X-36.38932 Y40.75811
G01 X-36.19328 Y40.76774
G01 X-36.14131 Y40.77287
G01 X-35.94525 Y40.80195
G01 X-35.88587 Y40.81379
G01 X-35.68986 Y40.86289
G01 X-35.61754 Y40.88488
G01 X-35.42150 Y40.95504
G01 X-35.37652 Y40.97241
G01 X-35.32199 Y40.99499
G01 X-34.65618 Y41.66080
G01 X-34.34917 Y42.40197
G01 X-34.16616 Y42.58498
G01 X-33.42499 Y42.89199
G01 X-32.70906 Y42.89196
G01 X-32.75722 Y42.92051
G01 X-32.83251 Y42.97548
G01 X-32.89603 Y43.04370
G01 X-32.94549 Y43.12272
G01 X-32.97675 Y43.18521
G01 X-33.01033 Y43.27208
G01 X-33.02687 Y43.36372
G01 X-33.02679 Y43.37116
G01 X-33.02217 Y43.39219
G01 X-33.02214 Y43.39227
G01 X-33.00840 Y43.45498
G01 X-32.99768 Y43.48980
G01 X-32.98808 Y43.52308
G01 X-32.97350 Y43.57743
G01 X-32.96162 Y43.61792
G01 X-32.91938 Y43.76588
G01 X-32.90828 Y43.80868
G01 X-32.90213 Y43.85262
G01 X-32.89537 Y43.91134
G01 X-32.88549 Y43.99712
G01 X-32.88300 Y44.04772
G01 X-32.88194 Y44.09196
G01 X-32.88194 Y47.25949
G01 X-32.87396 Y47.37920
G01 X-32.86535 Y47.44395
G01 X-32.83180 Y47.57537
G01 X-32.81044 Y47.61106
G01 X-32.75113 Y47.67834
G01 X-32.72463 Y47.70336
G01 X-32.72336 Y47.70387
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.84219 Y47.53468 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.84219 Y47.53468
G01 X-32.84219 Y47.70300
G01 X-32.73218 Y47.70300
G01 X-32.72336 Y47.70387
G01 X-32.72336 Y47.70389
G01 X-32.69177 Y47.71723
G01 X-32.56891 Y47.77217
G01 X-32.51656 Y47.79764
G01 X-32.48628 Y47.81438
G01 X-32.46489 Y47.83038
G01 X-32.41293 Y47.87377
G01 X-32.35349 Y47.94717
G01 X-32.31069 Y48.03120
G01 X-32.28504 Y48.12817
G01 X-32.28306 Y48.14771
G01 X-32.28191 Y48.19302
G01 X-32.28191 Y51.39301
G01 X-32.28306 Y51.43835
G01 X-32.28504 Y51.45786
G01 X-32.31066 Y51.55484
G01 X-32.35351 Y51.63894
G01 X-32.41293 Y51.71227
G01 X-32.48626 Y51.77168
G01 X-32.56888 Y51.81384
G01 X-32.68206 Y51.86449
G01 X-32.72489 Y51.88229
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.84219 Y52.04823 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.84219 Y52.04823
G01 X-32.83291 Y52.01227
G01 X-32.80144 Y51.96215
G01 X-32.74076 Y51.89619
G01 X-32.72585 Y51.88270
G01 X-32.72489 Y51.88229
G01 X-32.73218 Y51.88301
G01 X-32.84219 Y51.88301
G01 X-32.84219 Y52.04823
G01 X-32.86256 Y52.12720
G01 X-32.87261 Y52.19708
G01 X-32.88194 Y52.32654
G01 X-32.88194 Y52.47396
G01 X-32.88300 Y52.51823
G01 X-32.88549 Y52.56883
G01 X-32.90213 Y52.71336
G01 X-32.90828 Y52.75725
G01 X-32.91938 Y52.80010
G01 X-32.95933 Y52.94000
G01 X-32.97637 Y52.98768
G01 X-33.01026 Y53.06944
G01 X-33.03190 Y53.11518
G01 X-33.10256 Y53.24236
G01 X-33.12507 Y53.28062
G01 X-33.12941 Y53.28663
G01 X-33.12984 Y53.28719
G01 X-33.15171 Y53.31592
G01 X-33.17335 Y53.34318
G01 X-33.24216 Y53.42987
G01 X-33.27617 Y53.46741
G01 X-33.30668 Y53.49946
G01 X-35.46270 Y55.65552
G01 X-35.49478 Y55.68605
G01 X-35.53230 Y55.72003
G01 X-35.64629 Y55.81048
G01 X-35.68163 Y55.83715
G01 X-35.71978 Y55.85960
G01 X-35.84698 Y55.93029
G01 X-35.89270 Y55.95193
G01 X-35.97454 Y55.98582
G01 X-36.02221 Y56.00289
G01 X-36.16209 Y56.04284
G01 X-36.20497 Y56.05394
G01 X-36.24883 Y56.06009
G01 X-36.39336 Y56.07672
G01 X-36.44396 Y56.07921
G01 X-36.48823 Y56.08028
G01 X-36.79077 Y56.08028
G01 X-36.80624 Y56.08043
G01 X-36.81510 Y56.08058
G01 X-36.96212 Y56.09511
G01 X-37.03197 Y56.10771
G01 X-37.12226 Y56.13845
G01 X-37.19475 Y56.19273
G01 X-37.25744 Y56.26174
G01 X-37.29930 Y56.31769
G01 X-37.34771 Y56.39714
G01 X-37.38023 Y56.48434
G01 X-37.39567 Y56.57611
G01 X-37.40067 Y56.64578
G01 X-37.39849 Y56.73898
G01 X-37.37868 Y56.83006
G01 X-37.35279 Y56.89051
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.04800 Y59.15317 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.04800 Y59.15317
G01 X-34.63812 Y59.56305
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.44009 Y63.64173 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.44009 Y63.64173
G01 X-39.43943 Y63.64006
G01 X-39.36831 Y63.40556
G01 X-39.34956 Y63.31135
G01 X-39.32554 Y63.06749
G01 X-39.32320 Y63.01946
G01 X-39.32320 Y60.05596
G01 X-39.06666 Y60.05596
G01 X-35.46593 Y63.65672
G01 X-35.04688 Y64.07574
G01 X-35.04688 Y64.07577
G01 X-35.01254 Y64.09266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.79036 Y64.42339 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.79036 Y64.42339
G01 X-35.78859 Y64.40838
G01 X-35.78856 Y64.40836
G01 X-35.78823 Y64.40543
G01 X-35.80349 Y64.32865
G01 X-35.86042 Y64.14105
G01 X-35.89717 Y64.05230
G01 X-35.98958 Y63.87943
G01 X-36.04294 Y63.79954
G01 X-36.16280 Y63.65349
G01 X-36.16730 Y63.64801
G01 X-36.23522 Y63.58009
G01 X-36.38676 Y63.45573
G01 X-36.46664 Y63.40236
G01 X-36.63951 Y63.30996
G01 X-36.72826 Y63.27320
G01 X-36.91586 Y63.21628
G01 X-37.01007 Y63.19754
G01 X-37.20517 Y63.17833
G01 X-37.25320 Y63.17597
G01 X-38.35719 Y63.17597
G01 X-38.40519 Y63.17833
G01 X-38.60029 Y63.19754
G01 X-38.69450 Y63.21628
G01 X-38.88210 Y63.27320
G01 X-38.91860 Y63.28832
G01 X-38.97085 Y63.30996
G01 X-39.14372 Y63.40236
G01 X-39.22361 Y63.45573
G01 X-39.37514 Y63.58011
G01 X-39.41078 Y63.61240
G01 X-39.44009 Y63.64173
G01 X-39.49244 Y63.72014
G01 X-39.64001 Y63.91910
G01 X-39.69384 Y63.98473
G01 X-39.85860 Y64.16652
G01 X-39.88665 Y64.19601
G01 X-42.04476 Y66.35412
G01 X-42.50917 Y66.54650
G01 X-42.53018 Y66.55580
G01 X-42.57722 Y66.57807
G01 X-42.61148 Y66.59634
G01 X-42.65481 Y66.62232
G01 X-42.68283 Y66.64102
G01 X-42.72263 Y66.67053
G01 X-42.74656 Y66.69014
G01 X-42.78291 Y66.72311
G01 X-42.80409 Y66.74429
G01 X-42.83703 Y66.78064
G01 X-42.85657 Y66.80446
G01 X-42.88608 Y66.84424
G01 X-42.90485 Y66.87236
G01 X-42.93084 Y66.91572
G01 X-42.94915 Y66.95006
G01 X-42.97140 Y66.99710
G01 X-42.98067 Y67.01798
G01 X-43.24915 Y67.66621
G01 X-43.24917 Y69.11797
G01 X-43.24917 Y83.08797
G01 X-43.24684 Y83.13600
G01 X-43.24201 Y83.18477
G01 X-43.22329 Y83.27898
G01 X-43.21321 Y83.31218
G01 X-43.20422 Y83.32437
G01 X-43.18456 Y83.35251
G01 X-43.14775 Y83.40174
G01 X-43.14590 Y83.40405
G01 X-43.11768 Y83.44121
G01 X-43.07640 Y83.49856
G01 X-43.06579 Y83.51299
G01 X-43.04859 Y83.53593
G01 X-43.03488 Y83.55104
G01 X-42.97231 Y83.61363
G01 X-42.95710 Y83.62742
G01 X-42.93429 Y83.64454
G01 X-42.86083 Y83.69422
G01 X-42.85039 Y83.70057
G01 X-42.81727 Y83.71670
G01 X-42.73604 Y83.75142
G01 X-42.73203 Y83.75292
G01 X-42.68880 Y83.76455
G01 X-42.60249 Y83.78327
G01 X-42.60092 Y83.78355
G01 X-42.56452 Y83.78660
G01 X-42.55362 Y83.78713
G01 X-42.50917 Y83.78822
G01 X-41.00920 Y83.78822
G01 X-40.96478 Y83.78713
G01 X-40.95383 Y83.78660
G01 X-40.91740 Y83.78355
G01 X-40.91588 Y83.78327
G01 X-40.82955 Y83.76455
G01 X-40.78629 Y83.75292
G01 X-40.78230 Y83.75145
G01 X-40.70107 Y83.71670
G01 X-40.66798 Y83.70057
G01 X-40.65751 Y83.69422
G01 X-40.58405 Y83.64451
G01 X-40.56125 Y83.62742
G01 X-40.54603 Y83.61360
G01 X-40.48347 Y83.55104
G01 X-40.46975 Y83.53590
G01 X-40.45256 Y83.51299
G01 X-40.40310 Y83.43991
G01 X-40.39660 Y83.42917
G01 X-40.38060 Y83.39638
G01 X-40.34570 Y83.31479
G01 X-40.34423 Y83.31083
G01 X-40.33259 Y83.26755
G01 X-40.31382 Y83.18106
G01 X-40.31360 Y83.17974
G01 X-40.31055 Y83.14334
G01 X-40.31001 Y83.13219
G01 X-40.30892 Y83.08797
G01 X-40.30892 Y68.90657
G01 X-40.29960 Y68.77710
G01 X-40.28954 Y68.70723
G01 X-40.28499 Y68.67865
G01 X-40.19170 Y68.55536
G01 X-40.17395 Y68.53560
G01 X-40.14070 Y68.50052
G01 X-37.92465 Y66.28442
G01 X-37.82650 Y66.19946
G01 X-37.76999 Y66.15715
G01 X-37.74654 Y66.14015
G01 X-37.59356 Y66.11897
G01 X-37.56704 Y66.11755
G01 X-37.51860 Y66.11623
G01 X-37.25320 Y66.11623
G01 X-37.20893 Y66.11516
G01 X-37.15833 Y66.11267
G01 X-37.01381 Y66.09603
G01 X-36.96991 Y66.08989
G01 X-36.92706 Y66.07879
G01 X-36.78716 Y66.03883
G01 X-36.73949 Y66.02179
G01 X-36.65772 Y65.98790
G01 X-36.61195 Y65.96626
G01 X-36.48480 Y65.89560
G01 X-36.44660 Y65.87312
G01 X-36.41119 Y65.84643
G01 X-36.29727 Y65.75600
G01 X-36.25973 Y65.72197
G01 X-36.19722 Y65.65943
G01 X-36.16318 Y65.62189
G01 X-36.07276 Y65.50797
G01 X-36.04604 Y65.47256
G01 X-36.02356 Y65.43436
G01 X-35.95290 Y65.30718
G01 X-35.93126 Y65.26144
G01 X-35.89737 Y65.17968
G01 X-35.88033 Y65.13200
G01 X-35.84038 Y64.99210
G01 X-35.82928 Y64.94925
G01 X-35.82313 Y64.90536
G01 X-35.80649 Y64.76081
G01 X-35.80400 Y64.71023
G01 X-35.80306 Y64.64988
G01 X-35.80357 Y64.62166
G01 X-35.79961 Y64.51862
G01 X-35.79295 Y64.44775
G01 X-35.79036 Y64.42339
G01 X-35.78856 Y64.40836
G01 X-35.76854 Y64.35832
G01 X-35.71820 Y64.27998
G01 X-35.65394 Y64.21257
G01 X-35.60113 Y64.16680
G01 X-35.52521 Y64.11272
G01 X-35.44043 Y64.07401
G01 X-35.34983 Y64.05204
G01 X-35.28066 Y64.04211
G01 X-35.18762 Y64.03769
G01 X-35.09804 Y64.05060
G01 X-35.04688 Y64.07574
G01 X-35.01254 Y64.09266
G01 X-34.95422 Y64.13315
G01 X-34.84073 Y64.22614
G01 X-34.83438 Y64.23228
G01 X-34.82262 Y64.24381
G01 X-34.68097 Y64.38547
G01 X-34.64063 Y64.42852
G01 X-34.61925 Y64.45291
G01 X-34.60350 Y64.47135
G01 X-34.58564 Y64.50208
G01 X-34.48988 Y64.67442
G01 X-34.46740 Y64.71260
G01 X-34.44066 Y64.74805
G01 X-34.32994 Y64.88755
G01 X-34.28493 Y64.93721
G01 X-34.22235 Y64.99979
G01 X-34.17274 Y65.04475
G01 X-34.03317 Y65.15552
G01 X-33.99778 Y65.18222
G01 X-33.95956 Y65.20470
G01 X-33.80385 Y65.29123
G01 X-33.74328 Y65.31988
G01 X-33.70281 Y65.33782
G01 X-33.66154 Y65.35374
G01 X-33.59844 Y65.37632
G01 X-33.42717 Y65.42524
G01 X-33.38422 Y65.43637
G01 X-33.34025 Y65.44252
G01 X-33.16334 Y65.46286
G01 X-33.09636 Y65.46616
G01 X-33.00789 Y65.46616
G01 X-32.94104 Y65.46286
G01 X-32.76400 Y65.44249
G01 X-32.72009 Y65.43634
G01 X-32.67719 Y65.42522
G01 X-32.65793 Y65.41973
G01 X-32.50586 Y65.37632
G01 X-32.44282 Y65.35374
G01 X-32.36108 Y65.31988
G01 X-32.30048 Y65.29123
G01 X-32.14478 Y65.20470
G01 X-32.10655 Y65.18222
G01 X-32.07112 Y65.15550
G01 X-31.93160 Y65.04475
G01 X-31.88196 Y64.99977
G01 X-31.84991 Y64.96926
G01 X-28.33511 Y61.45444
G01 X-28.23706 Y61.36955
G01 X-28.18057 Y61.32723
G01 X-28.15700 Y61.31014
G01 X-28.00359 Y61.28893
G01 X-27.97707 Y61.28751
G01 X-27.92904 Y61.28624
G01 X-27.33569 Y61.28624
G01 X-27.20623 Y61.29553
G01 X-27.13635 Y61.30559
G01 X-27.06681 Y61.32596
G01 X-27.00981 Y61.34268
G01 X-26.96569 Y61.37102
G01 X-26.89826 Y61.43534
G01 X-26.85251 Y61.48814
G01 X-26.81273 Y61.54268
G01 X-26.80118 Y61.59068
G01 X-26.77230 Y61.71100
G01 X-26.76663 Y61.76371
G01 X-26.76143 Y61.86048
G01 X-26.76143 Y77.36596
G01 X-26.76033 Y77.41023
G01 X-26.75706 Y77.47711
G01 X-26.74136 Y77.61333
G01 X-26.73669 Y77.65412
G01 X-26.73054 Y77.69807
G01 X-26.71941 Y77.74094
G01 X-26.67049 Y77.91229
G01 X-26.64794 Y77.97533
G01 X-26.61408 Y78.05710
G01 X-26.58543 Y78.11767
G01 X-26.49887 Y78.27338
G01 X-26.47639 Y78.31160
G01 X-26.44967 Y78.34704
G01 X-26.43450 Y78.36616
G01 X-26.34464 Y78.47937
G01 X-26.33895 Y78.48653
G01 X-26.29394 Y78.53619
G01 X-26.26343 Y78.56825
G01 X-23.97614 Y80.85554
G01 X-23.89115 Y80.95369
G01 X-23.86209 Y80.99252
G01 X-23.86123 Y80.99532
G01 X-23.85534 Y81.01373
G01 X-23.83286 Y81.08170
G01 X-23.81772 Y81.13238
G01 X-23.73649 Y81.39656
G01 X-23.72818 Y81.41871
G01 X-23.69308 Y81.49999
G01 X-23.62267 Y81.64320
G01 X-23.52701 Y81.81134
G01 X-23.48536 Y81.87769
G01 X-23.47891 Y81.88584
G01 X-23.31541 Y82.08970
G01 X-23.25384 Y82.15765
G01 X-23.19130 Y82.22018
G01 X-23.12338 Y82.28173
G01 X-22.91952 Y82.44520
G01 X-22.91124 Y82.45178
G01 X-22.84505 Y82.49333
G01 X-22.67688 Y82.58901
G01 X-22.53370 Y82.65940
G01 X-22.45234 Y82.69453
G01 X-22.43022 Y82.70283
G01 X-22.17053 Y82.78266
G01 X-22.11447 Y82.79625
G01 X-22.02758 Y82.81287
G01 X-21.90317 Y82.83037
G01 X-21.67650 Y82.84837
G01 X-21.63217 Y82.85081
G01 X-21.58788 Y82.84837
G01 X-21.36118 Y82.83037
G01 X-21.23677 Y82.81287
G01 X-21.14988 Y82.79625
G01 X-21.09382 Y82.78266
G01 X-20.83411 Y82.70283
G01 X-20.81201 Y82.69455
G01 X-20.73065 Y82.65940
G01 X-20.58745 Y82.58901
G01 X-20.41930 Y82.49333
G01 X-20.35306 Y82.45173
G01 X-20.34483 Y82.44523
G01 X-20.31165 Y82.41861
G01 X-20.20360 Y82.34403
G01 X-20.16291 Y82.32003
G01 X-20.13972 Y82.31558
G01 X-19.98882 Y82.29930
G01 X-19.97724 Y82.29902
G01 X-19.95550 Y82.29874
G01 X-14.45068 Y82.29874
G01 X-14.40643 Y82.29768
G01 X-14.33950 Y82.29437
G01 X-14.16254 Y82.27403
G01 X-14.11863 Y82.26788
G01 X-14.07573 Y82.25676
G01 X-13.90440 Y82.20784
G01 X-13.84133 Y82.18528
G01 X-13.75960 Y82.15140
G01 X-13.69899 Y82.12275
G01 X-13.54329 Y82.03621
G01 X-13.50511 Y82.01376
G01 X-13.46966 Y81.98701
G01 X-13.33011 Y81.87627
G01 X-13.28048 Y81.83128
G01 X-13.24842 Y81.80078
G01 X-6.21458 Y74.76693
G01 X-6.18407 Y74.73488
G01 X-6.13906 Y74.68522
G01 X-6.02835 Y74.54570
G01 X-6.00162 Y74.51032
G01 X-5.97915 Y74.47206
G01 X-5.89256 Y74.31629
G01 X-5.86393 Y74.25578
G01 X-5.85933 Y74.24590
G01 X-5.83007 Y74.17402
G01 X-5.80752 Y74.11098
G01 X-5.79433 Y74.06483
G01 X-5.76673 Y73.96803
G01 X-5.75860 Y73.93963
G01 X-5.74747 Y73.89668
G01 X-5.74133 Y73.85281
G01 X-5.72095 Y73.67580
G01 X-5.71768 Y73.60892
G01 X-5.71659 Y73.56467
G01 X-5.71659 Y70.33613
G01 X-5.70726 Y70.20664
G01 X-5.69723 Y70.13679
G01 X-5.67686 Y70.06892
G01 X-5.67686 Y69.56999
G01 X-4.93818 Y69.56999
G01 X-4.93818 Y69.57997
G01 X-4.92878 Y69.67560
G01 X-4.90089 Y69.76753
G01 X-4.89462 Y69.77924
G01 X-4.87280 Y69.80103
G01 X-4.77953 Y69.88813
G01 X-4.69406 Y69.95864
G01 X-4.61001 Y70.00146
G01 X-4.58908 Y70.00799
G01 X-4.51296 Y70.02714
G01 X-4.49340 Y70.02910
G01 X-4.44819 Y70.03024
G01 X-2.74819 Y70.03024
G01 X-2.70290 Y70.02910
G01 X-2.68339 Y70.02714
G01 X-2.58639 Y70.00149
G01 X-2.50227 Y69.95864
G01 X-2.42894 Y69.89923
G01 X-2.36953 Y69.82590
G01 X-2.32668 Y69.74177
G01 X-2.30102 Y69.64477
G01 X-2.29907 Y69.62526
G01 X-2.29792 Y69.58000
G01 X-2.29792 Y67.88000
G01 X-2.29907 Y67.83474
G01 X-2.30102 Y67.81521
G01 X-2.31918 Y67.74244
G01 X-2.32668 Y67.71820
G01 X-2.36955 Y67.63410
G01 X-2.42894 Y67.56075
G01 X-2.49846 Y67.50413
G01 X-2.50227 Y67.50136
G01 X-2.51674 Y67.49316
G01 X-2.58637 Y67.45849
G01 X-2.68339 Y67.43283
G01 X-2.70293 Y67.43088
G01 X-2.74819 Y67.42974
G01 X-4.44819 Y67.42974
G01 X-4.49342 Y67.43088
G01 X-4.51296 Y67.43283
G01 X-4.60996 Y67.45849
G01 X-4.69406 Y67.50134
G01 X-4.77953 Y67.57187
G01 X-4.87905 Y67.66479
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.67686 Y70.06892 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.67686 Y70.06892
G01 X-5.65847 Y70.00768
G01 X-5.63177 Y69.96621
G01 X-5.56749 Y69.89874
G01 X-5.51468 Y69.85300
G01 X-5.43884 Y69.79902
G01 X-5.35415 Y69.76034
G01 X-5.26368 Y69.73839
G01 X-5.19454 Y69.72841
G01 X-5.10422 Y69.72386
G01 X-5.01455 Y69.73598
G01 X-4.92868 Y69.76433
G01 X-4.89462 Y69.77924
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.42245 Y64.91549 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.42245 Y64.91549
G01 X-9.15684 Y64.91549
G01 X-9.15684 Y65.18024
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.69944 Y67.31150 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.69944 Y67.31150
G01 X-5.65954 Y67.45100
G01 X-5.64227 Y67.47942
G01 X-5.58189 Y67.54678
G01 X-5.53063 Y67.59428
G01 X-5.45654 Y67.65084
G01 X-5.37308 Y67.69237
G01 X-5.28326 Y67.71731
G01 X-5.21448 Y67.72956
G01 X-5.12172 Y67.73703
G01 X-5.02924 Y67.72684
G01 X-4.94031 Y67.69938
G01 X-4.89451 Y67.68028
G01 X-4.87905 Y67.66479
G01 X-4.89424 Y67.68003
G01 X-4.90089 Y67.69245
G01 X-4.92878 Y67.78437
G01 X-4.93818 Y67.87998
G01 X-4.93818 Y67.89001
G01 X-5.67686 Y67.89001
G01 X-5.67686 Y67.39049
G01 X-5.69944 Y67.31150
G01 X-5.70836 Y67.24561
G01 X-5.71659 Y67.12382
G01 X-5.71659 Y63.12383
G01 X-5.71768 Y63.07958
G01 X-5.72095 Y63.01270
G01 X-5.74133 Y62.83569
G01 X-5.74747 Y62.79177
G01 X-5.75669 Y62.75573
G01 X-5.75860 Y62.74890
G01 X-5.80752 Y62.57752
G01 X-5.83007 Y62.51451
G01 X-5.84389 Y62.47836
G01 X-5.86393 Y62.43274
G01 X-5.89258 Y62.37214
G01 X-5.97912 Y62.21644
G01 X-6.00155 Y62.17831
G01 X-6.02832 Y62.14280
G01 X-6.13909 Y62.00325
G01 X-6.18407 Y61.95362
G01 X-6.24661 Y61.89109
G01 X-6.29626 Y61.84608
G01 X-6.43579 Y61.73534
G01 X-6.47122 Y61.70861
G01 X-6.50942 Y61.68614
G01 X-6.66517 Y61.59960
G01 X-6.72555 Y61.57102
G01 X-6.80749 Y61.53709
G01 X-6.87056 Y61.51451
G01 X-7.04188 Y61.46561
G01 X-7.08478 Y61.45449
G01 X-7.12870 Y61.44834
G01 X-7.30569 Y61.42797
G01 X-7.37259 Y61.42467
G01 X-7.46111 Y61.42467
G01 X-7.52799 Y61.42797
G01 X-7.70500 Y61.44834
G01 X-7.74897 Y61.45449
G01 X-7.76027 Y61.45721
G01 X-7.79194 Y61.46503
G01 X-7.81757 Y61.47095
G01 X-7.81917 Y61.47130
G01 X-7.84993 Y61.47331
G01 X-7.90916 Y61.47526
G01 X-16.81486 Y61.47526
G01 X-16.85911 Y61.47636
G01 X-16.92601 Y61.47963
G01 X-17.10300 Y61.50000
G01 X-17.14686 Y61.50615
G01 X-17.18979 Y61.51728
G01 X-17.36114 Y61.56620
G01 X-17.42418 Y61.58875
G01 X-17.50592 Y61.62261
G01 X-17.56650 Y61.65126
G01 X-17.72225 Y61.73780
G01 X-17.76043 Y61.76028
G01 X-17.79589 Y61.78700
G01 X-17.93538 Y61.89774
G01 X-17.98504 Y61.94275
G01 X-18.04757 Y62.00531
G01 X-18.09258 Y62.05494
G01 X-18.20330 Y62.19447
G01 X-18.23005 Y62.22990
G01 X-18.25253 Y62.26813
G01 X-18.33906 Y62.42383
G01 X-18.36774 Y62.48441
G01 X-18.40160 Y62.56617
G01 X-18.42415 Y62.62921
G01 X-18.47308 Y62.80056
G01 X-18.48420 Y62.84344
G01 X-18.49035 Y62.88735
G01 X-18.51072 Y63.06437
G01 X-18.51399 Y63.13124
G01 X-18.51399 Y63.21976
G01 X-18.51072 Y63.28664
G01 X-18.49035 Y63.46365
G01 X-18.48420 Y63.50757
G01 X-18.47308 Y63.55047
G01 X-18.42415 Y63.72179
G01 X-18.40160 Y63.78486
G01 X-18.36774 Y63.86662
G01 X-18.33906 Y63.92718
G01 X-18.25253 Y64.08290
G01 X-18.23005 Y64.12116
G01 X-18.20330 Y64.15656
G01 X-18.09258 Y64.29606
G01 X-18.04757 Y64.34572
G01 X-17.98504 Y64.40828
G01 X-17.93538 Y64.45326
G01 X-17.79589 Y64.56401
G01 X-17.76043 Y64.59073
G01 X-17.72220 Y64.61321
G01 X-17.56652 Y64.69974
G01 X-17.50592 Y64.72840
G01 X-17.42418 Y64.76228
G01 X-17.36114 Y64.78483
G01 X-17.18979 Y64.83375
G01 X-17.14686 Y64.84488
G01 X-17.10300 Y64.85103
G01 X-16.92601 Y64.87137
G01 X-16.85911 Y64.87467
G01 X-16.81486 Y64.87577
G01 X-9.69133 Y64.87577
G01 X-9.56187 Y64.88506
G01 X-9.49199 Y64.89512
G01 X-9.42245 Y64.91549
G01 X-9.36545 Y64.93220
G01 X-9.32146 Y64.96047
G01 X-9.25404 Y65.02474
G01 X-9.20827 Y65.07754
G01 X-9.16839 Y65.13213
G01 X-9.15684 Y65.18024
G01 X-9.12796 Y65.30050
G01 X-9.12229 Y65.35321
G01 X-9.11709 Y65.45001
G01 X-9.11709 Y72.62251
G01 X-9.12641 Y72.75203
G01 X-9.13644 Y72.82188
G01 X-9.14101 Y72.85050
G01 X-9.23428 Y72.97374
G01 X-9.25204 Y72.99350
G01 X-9.28529 Y73.02858
G01 X-14.98677 Y78.73007
G01 X-15.08482 Y78.81501
G01 X-15.14131 Y78.85730
G01 X-15.16485 Y78.87434
G01 X-15.31786 Y78.89555
G01 X-15.34443 Y78.89697
G01 X-15.39284 Y78.89827
G01 X-19.95550 Y78.89827
G01 X-20.08498 Y78.88895
G01 X-20.15483 Y78.87891
G01 X-20.16311 Y78.87769
G01 X-20.28542 Y78.79878
G01 X-20.29464 Y78.79174
G01 X-20.31165 Y78.77841
G01 X-20.34483 Y78.75179
G01 X-20.35306 Y78.74528
G01 X-20.41930 Y78.70368
G01 X-20.58747 Y78.60800
G01 X-20.73065 Y78.53761
G01 X-20.81196 Y78.50248
G01 X-20.83411 Y78.49418
G01 X-21.08016 Y78.41851
G01 X-21.09380 Y78.41435
G01 X-21.14985 Y78.40073
G01 X-21.23682 Y78.38412
G01 X-21.36116 Y78.36665
G01 X-21.46431 Y78.35844
G01 X-21.58706 Y78.34023
G01 X-21.59336 Y78.33886
G01 X-21.66314 Y78.32634
G01 X-21.66377 Y78.32623
G01 X-21.79666 Y78.22402
G01 X-21.81066 Y78.21107
G01 X-21.83548 Y78.18717
G01 X-23.19273 Y76.82992
G01 X-23.27761 Y76.73190
G01 X-23.31993 Y76.67539
G01 X-23.33702 Y76.65182
G01 X-23.35823 Y76.49840
G01 X-23.35965 Y76.47188
G01 X-23.36092 Y76.42385
G01 X-23.36092 Y69.67626
G01 X-23.35160 Y69.54678
G01 X-23.34157 Y69.47693
G01 X-23.32120 Y69.40908
G01 X-23.32117 Y68.63654
G01 X-23.42633 Y68.34271
G01 X-23.44860 Y68.26943
G01 X-23.53697 Y67.91658
G01 X-23.54749 Y67.86387
G01 X-23.59984 Y67.51102
G01 X-23.60388 Y67.46999
G01 X-23.62122 Y67.11714
G01 X-23.62122 Y67.07988
G01 X-23.60388 Y66.72702
G01 X-23.59984 Y66.68600
G01 X-23.54749 Y66.33314
G01 X-23.53697 Y66.28044
G01 X-23.44860 Y65.92758
G01 X-23.42633 Y65.85433
G01 X-23.34667 Y65.63175
G01 X-23.34667 Y60.10638
G01 X-23.34060 Y60.07039
G01 X-23.30428 Y59.82536
G01 X-23.29618 Y59.74344
G01 X-23.28414 Y59.49838
G01 X-23.28414 Y59.41957
G01 X-23.29618 Y59.17453
G01 X-23.30428 Y59.09262
G01 X-23.32529 Y58.95096
G01 X-23.33072 Y58.90677
G01 X-23.33667 Y58.84639
G01 X-23.35079 Y58.75160
G01 X-23.35353 Y58.73778
G01 X-23.34581 Y58.65909
G01 X-23.32707 Y58.56488
G01 X-23.25595 Y58.33039
G01 X-23.21917 Y58.24164
G01 X-23.10367 Y58.02551
G01 X-23.05031 Y57.94566
G01 X-22.98279 Y57.86341
G01 X-22.89483 Y57.75622
G01 X-22.86255 Y57.72061
G01 X-20.21361 Y55.07170
G01 X-20.21358 Y55.05889
G01 X-20.17683 Y54.97038
G01 X-20.12070 Y54.81353
G01 X-20.09774 Y54.73802
G01 X-20.05844 Y54.58120
G01 X-20.04559 Y54.51678
G01 X-20.02235 Y54.35996
G01 X-20.01661 Y54.30197
G01 X-20.00891 Y54.14513
G01 X-20.00891 Y54.08922
G01 X-20.01417 Y53.98239
G01 X-20.01485 Y53.95369
G01 X-20.01485 Y53.93220
G01 X-20.01778 Y53.87299
G01 X-20.03345 Y53.71389
G01 X-20.03434 Y53.70556
G01 X-20.04114 Y53.64391
G01 X-20.04213 Y53.63464
G01 X-20.05786 Y53.47503
G01 X-20.07195 Y53.38079
G01 X-20.07434 Y53.36880
G01 X-20.07589 Y53.36080
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-20.21358 Y55.05889 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-20.21358 Y55.05889
G01 X-20.21630 Y55.06161
G01 X-20.33754 Y55.16110
G01 X-20.41742 Y55.21447
G01 X-20.55572 Y55.28841
G01 X-20.64447 Y55.32516
G01 X-20.79453 Y55.37070
G01 X-20.88874 Y55.38942
G01 X-21.04483 Y55.40479
G01 X-21.14089 Y55.40479
G01 X-21.17929 Y55.40103
G01 X-21.29695 Y55.38942
G01 X-21.39115 Y55.37070
G01 X-21.54124 Y55.32516
G01 X-21.62999 Y55.28841
G01 X-21.76829 Y55.21447
G01 X-21.84815 Y55.16110
G01 X-21.96938 Y55.06161
G01 X-22.03730 Y54.99369
G01 X-22.13680 Y54.87248
G01 X-22.19016 Y54.79260
G01 X-22.26410 Y54.65430
G01 X-22.30086 Y54.56555
G01 X-22.34637 Y54.41549
G01 X-22.36512 Y54.32125
G01 X-22.38048 Y54.16520
G01 X-22.38048 Y54.06913
G01 X-22.36512 Y53.91308
G01 X-22.34637 Y53.81884
G01 X-22.30086 Y53.66878
G01 X-22.26410 Y53.58003
G01 X-22.19016 Y53.44173
G01 X-22.14675 Y53.37675
G01 X-22.12996 Y53.36748
G01 X-22.11731 Y53.36073
G01 X-22.03512 Y53.31158
G01 X-22.00106 Y53.28882
G01 X-21.98879 Y53.28046
G01 X-21.93123 Y53.24061
G01 X-21.91996 Y53.23294
G01 X-21.89854 Y53.21861
G01 X-21.84868 Y53.18252
G01 X-21.83987 Y53.16438
G01 X-21.82133 Y53.12519
G01 X-21.79171 Y53.05392
G01 X-21.77769 Y53.01473
G01 X-21.76786 Y52.98514
G01 X-21.76784 Y52.94582
G01 X-21.76784 Y52.71442
G01 X-21.76786 Y52.69118
G01 X-21.76786 Y50.95730
G01 X-21.74968 Y50.88476
G01 X-21.74137 Y50.84305
G01 X-21.72682 Y50.74503
G01 X-21.72311 Y50.70742
G01 X-21.71828 Y50.60937
G01 X-21.71785 Y50.59116
G01 X-21.71785 Y48.49117
G01 X-21.71739 Y48.47293
G01 X-21.71546 Y48.43371
G01 X-21.71180 Y48.39670
G01 X-21.70599 Y48.35751
G01 X-21.69816 Y48.31827
G01 X-21.68836 Y48.27905
G01 X-21.67510 Y48.23551
G01 X-21.66105 Y48.19630
G01 X-21.64061 Y48.14705
G01 X-21.62207 Y48.10785
G01 X-21.59103 Y48.04994
G01 X-21.56753 Y48.01072
G01 X-21.52039 Y47.94042
G01 X-21.49131 Y47.90123
G01 X-21.41917 Y47.81370
G01 X-21.41282 Y47.80666
G01 X-21.41285 Y46.64116
G01 X-21.41333 Y46.63117
G01 X-20.48041 Y46.63117
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.10284 Y47.80117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.10284 Y47.80117
G01 X-21.33286 Y47.80117
G01 X-21.38087 Y47.80351
G01 X-21.41282 Y47.80666
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.63175 Y51.99195 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.63175 Y51.99195
G01 X-17.60285 Y52.11224
G01 X-17.60285 Y52.37719
G01 X-17.33726 Y52.37719
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.72324 Y49.41761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.72324 Y49.41761
G01 X-17.70282 Y49.34971
G01 X-17.70282 Y48.65682
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.24796 Y49.01319 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.24796 Y49.01319
G01 X-17.28964 Y49.01918
G01 X-17.38014 Y49.04115
G01 X-17.46485 Y49.07981
G01 X-17.54069 Y49.13381
G01 X-17.59350 Y49.17956
G01 X-17.65779 Y49.24699
G01 X-17.68448 Y49.28850
G01 X-17.72324 Y49.41761
G01 X-17.73327 Y49.48746
G01 X-17.74260 Y49.61694
G01 X-17.74260 Y50.04194
G01 X-17.73978 Y50.11311
G01 X-17.73670 Y50.15192
G01 X-17.73518 Y50.16929
G01 X-17.72934 Y50.18519
G01 X-17.71618 Y50.21994
G01 X-17.69924 Y50.26891
G01 X-17.66988 Y50.36243
G01 X-17.66779 Y50.36911
G01 X-17.65377 Y50.44935
G01 X-17.64516 Y50.51661
G01 X-17.64366 Y50.54684
G01 X-17.64257 Y50.59116
G01 X-17.64257 Y51.84267
G01 X-17.63739 Y51.93924
G01 X-17.63175 Y51.99195
G01 X-17.59121 Y52.16063
G01 X-17.55141 Y52.21514
G01 X-17.50564 Y52.26794
G01 X-17.43823 Y52.33220
G01 X-17.39421 Y52.36050
G01 X-17.33726 Y52.37719
G01 X-17.26769 Y52.39758
G01 X-17.19787 Y52.40762
G01 X-17.06833 Y52.41694
G01 X-16.88822 Y52.41694
G01 X-16.76967 Y52.40914
G01 X-16.73038 Y52.40396
G01 X-16.70709 Y52.39476
G01 X-16.59889 Y52.34361
G01 X-16.59045 Y52.33891
G01 X-16.52992 Y52.31028
G01 X-16.51992 Y52.30561
G01 X-16.44814 Y52.27643
G01 X-16.38512 Y52.25387
G01 X-16.21684 Y52.20581
G01 X-16.21377 Y52.20493
G01 X-16.17092 Y52.19383
G01 X-16.12695 Y52.18768
G01 X-15.94997 Y52.16731
G01 X-15.88306 Y52.16403
G01 X-15.83882 Y52.16294
G01 X-12.87697 Y52.16294
G01 X-12.83273 Y52.16403
G01 X-12.76582 Y52.16731
G01 X-12.58883 Y52.18768
G01 X-12.54492 Y52.19383
G01 X-12.50202 Y52.20495
G01 X-12.33069 Y52.25387
G01 X-12.26763 Y52.27643
G01 X-12.18586 Y52.31028
G01 X-12.17306 Y52.31635
G01 X-12.12531 Y52.33894
G01 X-11.96956 Y52.42547
G01 X-11.93136 Y52.44798
G01 X-11.89592 Y52.47467
G01 X-11.88879 Y52.48036
G01 X-11.75643 Y52.58542
G01 X-11.70677 Y52.63043
G01 X-11.67471 Y52.66093
G01 X-11.17314 Y53.16251
G01 X-11.08376 Y53.24084
G01 X-11.03240 Y53.28023
G01 X-11.01812 Y53.29098
G01 X-10.98015 Y53.29956
G01 X-10.91614 Y53.31267
G01 X-10.81835 Y53.33848
G01 X-10.79140 Y53.35102
G01 X-10.73433 Y53.38130
G01 X-10.72889 Y53.38529
G01 X-10.66092 Y53.44074
G01 X-10.60784 Y53.50551
G01 X-10.60151 Y53.51409
G01 X-10.55866 Y53.59822
G01 X-10.53304 Y53.69514
G01 X-10.53105 Y53.71468
G01 X-10.53093 Y53.71752
G01 X-10.52892 Y53.75996
G01 X-10.52211 Y53.83611
G01 X-10.51688 Y53.87591
G01 X-10.50786 Y53.89872
G01 X-10.45671 Y54.00690
G01 X-10.45590 Y54.00838
G01 X-10.42727 Y54.06888
G01 X-10.39341 Y54.15064
G01 X-10.37086 Y54.21368
G01 X-10.32194 Y54.38503
G01 X-10.31081 Y54.42793
G01 X-10.30466 Y54.47182
G01 X-10.28429 Y54.64884
G01 X-10.28102 Y54.71572
G01 X-10.28102 Y54.80423
G01 X-10.28429 Y54.87114
G01 X-10.30466 Y55.04812
G01 X-10.31081 Y55.09204
G01 X-10.32194 Y55.13494
G01 X-10.35884 Y55.26423
G01 X-10.37086 Y55.30627
G01 X-10.39341 Y55.36933
G01 X-10.42727 Y55.45110
G01 X-10.45587 Y55.51152
G01 X-10.45661 Y55.51289
G01 X-10.50786 Y55.62128
G01 X-10.51688 Y55.64406
G01 X-10.52211 Y55.68391
G01 X-10.52892 Y55.75999
G01 X-10.53093 Y55.80243
G01 X-10.53105 Y55.80532
G01 X-10.53304 Y55.82483
G01 X-10.55866 Y55.92181
G01 X-10.60151 Y56.00591
G01 X-10.66092 Y56.07924
G01 X-10.73425 Y56.13865
G01 X-10.81835 Y56.18150
G01 X-10.91533 Y56.20713
G01 X-10.93484 Y56.20911
G01 X-10.93771 Y56.20924
G01 X-10.98015 Y56.21124
G01 X-11.05630 Y56.21805
G01 X-11.09610 Y56.22328
G01 X-11.11891 Y56.23230
G01 X-11.22696 Y56.28338
G01 X-11.22849 Y56.28422
G01 X-11.28907 Y56.31289
G01 X-11.37083 Y56.34675
G01 X-11.43390 Y56.36931
G01 X-11.60522 Y56.41823
G01 X-11.64810 Y56.42935
G01 X-11.69204 Y56.43550
G01 X-11.86902 Y56.45587
G01 X-11.93593 Y56.45915
G01 X-12.02445 Y56.45915
G01 X-12.09133 Y56.45587
G01 X-12.26834 Y56.43550
G01 X-12.31223 Y56.42935
G01 X-12.35513 Y56.41823
G01 X-12.52635 Y56.36933
G01 X-12.58952 Y56.34675
G01 X-12.67128 Y56.31289
G01 X-12.73171 Y56.28429
G01 X-12.73308 Y56.28356
G01 X-12.84146 Y56.23230
G01 X-12.86425 Y56.22328
G01 X-12.90410 Y56.21805
G01 X-12.98020 Y56.21124
G01 X-13.02264 Y56.20924
G01 X-13.02551 Y56.20911
G01 X-13.04499 Y56.20713
G01 X-13.10001 Y56.19400
G01 X-13.14202 Y56.18147
G01 X-13.14314 Y56.18099
G01 X-13.22604 Y56.13867
G01 X-13.29943 Y56.07924
G01 X-13.32066 Y56.05480
G01 X-13.35884 Y56.00591
G01 X-13.42114 Y55.87456
G01 X-13.46460 Y55.75999
G01 X-13.46643 Y55.75526
G01 X-13.47019 Y55.74548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-7.84018 Y53.44922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-7.84018 Y53.44922
G01 X-7.84018 Y53.61010
G01 X-7.91816 Y53.67409
G01 X-7.95377 Y53.70640
G01 X-8.06738 Y53.81998
G01 X-8.20733 Y53.81998
G01 X-8.15199 Y53.74155
G01 X-8.00165 Y53.58059
G01 X-7.84018 Y53.44922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.59299 Y53.81998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.59299 Y53.81998
G01 X-5.64836 Y53.74157
G01 X-5.79870 Y53.58059
G01 X-5.96017 Y53.44922
G01 X-5.96017 Y53.61013
G01 X-5.88222 Y53.67409
G01 X-5.81430 Y53.74201
G01 X-5.75032 Y53.81998
G01 X-5.59299 Y53.81998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.59299 Y55.69999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.59299 Y55.69999
G01 X-5.64836 Y55.77840
G01 X-5.79870 Y55.93939
G01 X-5.96954 Y56.07837
G01 X-6.01262 Y56.10456
G01 X-6.05288 Y56.07868
G01 X-6.09131 Y56.05828
G01 X-5.84661 Y55.81355
G01 X-5.81430 Y55.77794
G01 X-5.75034 Y55.69999
G01 X-5.59299 Y55.69999

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )