( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.98000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X2.29792 Y67.88000 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X2.29792 Y67.88000
G01 X2.29792 Y69.58000
G01 X2.29907 Y69.62526
G01 X2.30102 Y69.64477
G01 X2.32668 Y69.74177
G01 X2.36953 Y69.82590
G01 X2.42894 Y69.89923
G01 X2.50227 Y69.95864
G01 X2.58639 Y70.00149
G01 X2.68339 Y70.02714
G01 X2.70290 Y70.02910
G01 X2.74819 Y70.03024
G01 X4.44819 Y70.03024
G01 X4.49340 Y70.02910
G01 X4.51296 Y70.02714
G01 X4.58908 Y70.00799
G01 X4.61001 Y70.00146
G01 X4.69408 Y69.95864
G01 X4.71194 Y69.94533
G01 X4.76741 Y69.89925
G01 X4.82685 Y69.82587
G01 X4.83993 Y69.80240
G01 X4.86965 Y69.74182
G01 X4.89533 Y69.64477
G01 X4.89728 Y69.62526
G01 X4.89843 Y69.58000
G01 X4.89843 Y67.88000
G01 X4.89728 Y67.83474
G01 X4.89533 Y67.81521
G01 X4.86967 Y67.71818
G01 X4.83648 Y67.65122
G01 X4.82685 Y67.63413
G01 X4.76741 Y67.56075
G01 X4.69406 Y67.50134
G01 X4.69269 Y67.50053
G01 X4.60998 Y67.45849
G01 X4.51296 Y67.43283
G01 X4.49342 Y67.43088
G01 X4.44819 Y67.42974
G01 X2.74819 Y67.42974
G01 X2.70293 Y67.43088
G01 X2.68339 Y67.43283
G01 X2.58637 Y67.45849
G01 X2.51459 Y67.49435
G01 X2.50229 Y67.50134
G01 X2.47466 Y67.52224
G01 X2.42894 Y67.56075
G01 X2.38804 Y67.60952
G01 X2.36953 Y67.63410
G01 X2.32668 Y67.71823
G01 X2.31420 Y67.75999
G01 X2.30102 Y67.81518
G01 X2.29907 Y67.83474
G01 X2.29792 Y67.88000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.16660 Y62.32380 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.16660 Y62.32380
G01 X6.16660 Y63.92385
G01 X6.16774 Y63.96916
G01 X6.16970 Y63.98867
G01 X6.19535 Y64.08565
G01 X6.23817 Y64.16972
G01 X6.29759 Y64.24308
G01 X6.37094 Y64.30249
G01 X6.45501 Y64.34534
G01 X6.55199 Y64.37097
G01 X6.57150 Y64.37295
G01 X6.61686 Y64.37407
G01 X8.21686 Y64.37407
G01 X8.26238 Y64.37292
G01 X8.28163 Y64.37099
G01 X8.37866 Y64.34531
G01 X8.37980 Y64.34483
G01 X8.46273 Y64.30249
G01 X8.53611 Y64.24308
G01 X8.58176 Y64.18814
G01 X8.59547 Y64.16975
G01 X8.61483 Y64.13447
G01 X8.63835 Y64.08562
G01 X8.66398 Y63.98870
G01 X8.66596 Y63.96914
G01 X8.66710 Y63.92385
G01 X8.66710 Y62.32380
G01 X8.66596 Y62.27849
G01 X8.66398 Y62.25898
G01 X8.63835 Y62.16200
G01 X8.59550 Y62.07793
G01 X8.53611 Y62.00458
G01 X8.46273 Y61.94516
G01 X8.37866 Y61.90232
G01 X8.28168 Y61.87669
G01 X8.26217 Y61.87471
G01 X8.21686 Y61.87356
G01 X6.61686 Y61.87356
G01 X6.57150 Y61.87471
G01 X6.55199 Y61.87669
G01 X6.45504 Y61.90232
G01 X6.39532 Y61.93160
G01 X6.37094 Y61.94516
G01 X6.34333 Y61.96607
G01 X6.29759 Y62.00460
G01 X6.25669 Y62.05337
G01 X6.23817 Y62.07796
G01 X6.19586 Y62.16086
G01 X6.19535 Y62.16198
G01 X6.17224 Y62.24707
G01 X6.16970 Y62.25903
G01 X6.16774 Y62.27851
G01 X6.16660 Y62.32380
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.33822 Y59.53181 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.33822 Y59.53181
G01 X7.41684 Y59.45320
G01 X7.49545 Y59.53181
G01 X7.41684 Y59.53742
G01 X7.33822 Y59.53181
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.00322 Y58.12381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.00322 Y58.12381
G01 X6.00886 Y58.04520
G01 X6.08748 Y58.12381
G01 X6.00886 Y58.20245
G01 X6.00322 Y58.12381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.74620 Y58.12381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.74620 Y58.12381
G01 X8.82481 Y58.04520
G01 X8.83045 Y58.12379
G01 X8.82481 Y58.20242
G01 X8.74620 Y58.12381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.56460 Y62.37549 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.56460 Y62.37549
G01 X15.56460 Y63.97549
G01 X15.56571 Y64.02078
G01 X15.56770 Y64.04028
G01 X15.59335 Y64.13729
G01 X15.63615 Y64.22139
G01 X15.69559 Y64.29474
G01 X15.76894 Y64.35415
G01 X15.85301 Y64.39700
G01 X15.95004 Y64.42266
G01 X15.96957 Y64.42461
G01 X16.01486 Y64.42575
G01 X17.61483 Y64.42575
G01 X17.66005 Y64.42461
G01 X17.67963 Y64.42266
G01 X17.77658 Y64.39700
G01 X17.77770 Y64.39652
G01 X17.86073 Y64.35415
G01 X17.86335 Y64.35225
G01 X17.93409 Y64.29477
G01 X17.99347 Y64.22141
G01 X18.01227 Y64.18720
G01 X18.03635 Y64.13729
G01 X18.06198 Y64.04031
G01 X18.06396 Y64.02075
G01 X18.06510 Y63.97549
G01 X18.06510 Y62.37549
G01 X18.06396 Y62.33025
G01 X18.06198 Y62.31070
G01 X18.03635 Y62.21372
G01 X17.99347 Y62.12959
G01 X17.93409 Y62.05624
G01 X17.86076 Y61.99685
G01 X17.77666 Y61.95400
G01 X17.67958 Y61.92835
G01 X17.66010 Y61.92639
G01 X17.61483 Y61.92525
G01 X16.01486 Y61.92525
G01 X15.96957 Y61.92639
G01 X15.95004 Y61.92835
G01 X15.85301 Y61.95403
G01 X15.78550 Y61.98753
G01 X15.76897 Y61.99683
G01 X15.76510 Y61.99965
G01 X15.69559 Y62.05629
G01 X15.64451 Y62.11834
G01 X15.63615 Y62.12964
G01 X15.59338 Y62.21357
G01 X15.58329 Y62.24676
G01 X15.56770 Y62.31075
G01 X15.56571 Y62.33025
G01 X15.56460 Y62.37549
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.37986 Y67.09849 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.37986 Y67.09849
G01 X19.38229 Y67.05420
G01 X19.40030 Y66.82750
G01 X19.41780 Y66.70312
G01 X19.43441 Y66.61620
G01 X19.44800 Y66.56017
G01 X19.52786 Y66.30048
G01 X19.53614 Y66.27830
G01 X19.57129 Y66.19702
G01 X19.64168 Y66.05379
G01 X19.73733 Y65.88567
G01 X19.74648 Y65.86997
G01 X19.77902 Y65.81930
G01 X19.78544 Y65.81117
G01 X19.94894 Y65.60729
G01 X20.01051 Y65.53937
G01 X20.07305 Y65.47683
G01 X20.14097 Y65.41529
G01 X20.34483 Y65.25179
G01 X20.35301 Y65.24531
G01 X20.41930 Y65.20368
G01 X20.58747 Y65.10800
G01 X20.73065 Y65.03761
G01 X20.81196 Y65.00249
G01 X20.83411 Y64.99418
G01 X21.09382 Y64.91432
G01 X21.14985 Y64.90073
G01 X21.23682 Y64.88412
G01 X21.36118 Y64.86665
G01 X21.58790 Y64.84864
G01 X21.63217 Y64.84620
G01 X21.67647 Y64.84864
G01 X21.90317 Y64.86665
G01 X22.02755 Y64.88412
G01 X22.11450 Y64.90073
G01 X22.17053 Y64.91432
G01 X22.43024 Y64.99418
G01 X22.45239 Y65.00249
G01 X22.53370 Y65.03761
G01 X22.67688 Y65.10800
G01 X22.80007 Y65.17810
G01 X22.84505 Y65.20368
G01 X22.91134 Y65.24531
G01 X22.91952 Y65.25179
G01 X23.12338 Y65.41529
G01 X23.19130 Y65.47683
G01 X23.25384 Y65.53937
G01 X23.31541 Y65.60731
G01 X23.47891 Y65.81117
G01 X23.48536 Y65.81933
G01 X23.52701 Y65.88567
G01 X23.62267 Y66.05382
G01 X23.69308 Y66.19702
G01 X23.72818 Y66.27830
G01 X23.73649 Y66.30045
G01 X23.81635 Y66.56017
G01 X23.82994 Y66.61620
G01 X23.84655 Y66.70312
G01 X23.86405 Y66.82750
G01 X23.88206 Y67.05420
G01 X23.88449 Y67.09852
G01 X23.88206 Y67.14282
G01 X23.86405 Y67.36951
G01 X23.84655 Y67.49390
G01 X23.82994 Y67.58084
G01 X23.81635 Y67.63687
G01 X23.80258 Y67.68165
G01 X23.73649 Y67.89656
G01 X23.72818 Y67.91871
G01 X23.69308 Y67.99999
G01 X23.62267 Y68.14325
G01 X23.52701 Y68.31134
G01 X23.48536 Y68.37769
G01 X23.47891 Y68.38584
G01 X23.31541 Y68.58973
G01 X23.25384 Y68.65767
G01 X23.19130 Y68.72018
G01 X23.12338 Y68.78175
G01 X22.91952 Y68.94520
G01 X22.91134 Y68.95168
G01 X22.84505 Y68.99333
G01 X22.67685 Y69.08902
G01 X22.53370 Y69.15940
G01 X22.45234 Y69.19455
G01 X22.43022 Y69.20283
G01 X22.17053 Y69.28269
G01 X22.11447 Y69.29628
G01 X22.02758 Y69.31287
G01 X21.90317 Y69.33039
G01 X21.67650 Y69.34838
G01 X21.63217 Y69.35081
G01 X21.58788 Y69.34838
G01 X21.36118 Y69.33039
G01 X21.23677 Y69.31289
G01 X21.14988 Y69.29628
G01 X21.09385 Y69.28269
G01 X20.83411 Y69.20281
G01 X20.81201 Y69.19453
G01 X20.73065 Y69.15940
G01 X20.59657 Y69.09346
G01 X20.58745 Y69.08902
G01 X20.57980 Y69.08465
G01 X20.41930 Y68.99331
G01 X20.35298 Y68.95168
G01 X20.34483 Y68.94520
G01 X20.14097 Y68.78175
G01 X20.07305 Y68.72018
G01 X20.01051 Y68.65767
G01 X19.94894 Y68.58973
G01 X19.78544 Y68.38584
G01 X19.77899 Y68.37769
G01 X19.73733 Y68.31134
G01 X19.72179 Y68.28404
G01 X19.64168 Y68.14325
G01 X19.57127 Y67.99999
G01 X19.53614 Y67.91871
G01 X19.52786 Y67.89656
G01 X19.44800 Y67.63685
G01 X19.43441 Y67.58084
G01 X19.41780 Y67.49390
G01 X19.40030 Y67.36949
G01 X19.38229 Y67.14282
G01 X19.37986 Y67.09849
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.37986 Y80.59852 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.37986 Y80.59852
G01 X19.38229 Y80.55420
G01 X19.40030 Y80.32750
G01 X19.41780 Y80.20312
G01 X19.43441 Y80.11620
G01 X19.44800 Y80.06017
G01 X19.52786 Y79.80048
G01 X19.53614 Y79.77830
G01 X19.57129 Y79.69702
G01 X19.64168 Y79.55379
G01 X19.73733 Y79.38567
G01 X19.77902 Y79.31930
G01 X19.78544 Y79.31117
G01 X19.94894 Y79.10728
G01 X20.01051 Y79.03936
G01 X20.07305 Y78.97683
G01 X20.14097 Y78.91529
G01 X20.34483 Y78.75179
G01 X20.35301 Y78.74531
G01 X20.41930 Y78.70368
G01 X20.58747 Y78.60800
G01 X20.73065 Y78.53761
G01 X20.81196 Y78.50248
G01 X20.83411 Y78.49418
G01 X21.08016 Y78.41851
G01 X21.09380 Y78.41435
G01 X21.14985 Y78.40073
G01 X21.23682 Y78.38412
G01 X21.36118 Y78.36665
G01 X21.58790 Y78.34864
G01 X21.63217 Y78.34620
G01 X21.67647 Y78.34864
G01 X21.90317 Y78.36665
G01 X22.02755 Y78.38412
G01 X22.11450 Y78.40073
G01 X22.17053 Y78.41432
G01 X22.43024 Y78.49418
G01 X22.45239 Y78.50248
G01 X22.53370 Y78.53761
G01 X22.67688 Y78.60800
G01 X22.84505 Y78.70368
G01 X22.91134 Y78.74531
G01 X22.91952 Y78.75179
G01 X23.12338 Y78.91529
G01 X23.19130 Y78.97683
G01 X23.25384 Y79.03936
G01 X23.31541 Y79.10731
G01 X23.47888 Y79.31117
G01 X23.48536 Y79.31935
G01 X23.52229 Y79.37746
G01 X23.52701 Y79.38567
G01 X23.62267 Y79.55382
G01 X23.69308 Y79.69702
G01 X23.72818 Y79.77830
G01 X23.73651 Y79.80053
G01 X23.79138 Y79.97891
G01 X23.81635 Y80.06017
G01 X23.82994 Y80.11620
G01 X23.84655 Y80.20312
G01 X23.86405 Y80.32750
G01 X23.88206 Y80.55420
G01 X23.88449 Y80.59852
G01 X23.88206 Y80.64282
G01 X23.86405 Y80.86951
G01 X23.84655 Y80.99389
G01 X23.82994 Y81.08081
G01 X23.81637 Y81.13682
G01 X23.79885 Y81.19374
G01 X23.73649 Y81.39656
G01 X23.72818 Y81.41871
G01 X23.69308 Y81.49999
G01 X23.62267 Y81.64320
G01 X23.52701 Y81.81134
G01 X23.48536 Y81.87769
G01 X23.47891 Y81.88584
G01 X23.31541 Y82.08970
G01 X23.25384 Y82.15765
G01 X23.19130 Y82.22018
G01 X23.12338 Y82.28173
G01 X22.91952 Y82.44520
G01 X22.91124 Y82.45178
G01 X22.84505 Y82.49333
G01 X22.67688 Y82.58901
G01 X22.53370 Y82.65940
G01 X22.45234 Y82.69453
G01 X22.43024 Y82.70283
G01 X22.35729 Y82.72526
G01 X22.17053 Y82.78266
G01 X22.11447 Y82.79625
G01 X22.02758 Y82.81287
G01 X21.90317 Y82.83037
G01 X21.67650 Y82.84837
G01 X21.63217 Y82.85081
G01 X21.58788 Y82.84837
G01 X21.36118 Y82.83037
G01 X21.23677 Y82.81287
G01 X21.14988 Y82.79625
G01 X21.09382 Y82.78266
G01 X20.83411 Y82.70283
G01 X20.81201 Y82.69455
G01 X20.73065 Y82.65940
G01 X20.58747 Y82.58901
G01 X20.41930 Y82.49333
G01 X20.35301 Y82.45170
G01 X20.34483 Y82.44520
G01 X20.14097 Y82.28173
G01 X20.07305 Y82.22018
G01 X20.01051 Y82.15765
G01 X19.94894 Y82.08970
G01 X19.78544 Y81.88584
G01 X19.77899 Y81.87769
G01 X19.73733 Y81.81134
G01 X19.64168 Y81.64320
G01 X19.61463 Y81.58820
G01 X19.57127 Y81.49999
G01 X19.55905 Y81.47413
G01 X19.53614 Y81.41871
G01 X19.52786 Y81.39656
G01 X19.44800 Y81.13685
G01 X19.43441 Y81.08081
G01 X19.41780 Y80.99389
G01 X19.40030 Y80.86951
G01 X19.38229 Y80.64282
G01 X19.37986 Y80.59852
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.22790 Y73.10351 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.22790 Y73.10351
G01 X36.02417 Y73.10351
G01 X36.02414 Y73.30730
G01 X36.07304 Y73.23412
G01 X36.07926 Y73.22652
G01 X36.14718 Y73.15860
G01 X36.15478 Y73.15238
G01 X36.22790 Y73.10351
G01 X36.23545 Y73.10120
G01 X36.24525 Y73.09876
G01 X36.33872 Y73.08009
G01 X36.34853 Y73.07865
G01 X36.43880 Y73.06970
G01 X36.44863 Y73.06922
G01 X36.49341 Y73.06813
G01 X38.20768 Y73.06813
G01 X38.25254 Y73.06925
G01 X38.26234 Y73.06973
G01 X38.35251 Y73.07865
G01 X38.36232 Y73.08009
G01 X38.45579 Y73.09876
G01 X38.46559 Y73.10120
G01 X38.47314 Y73.10351
G01 X38.54629 Y73.15238
G01 X38.55388 Y73.15860
G01 X38.62180 Y73.22652
G01 X38.62803 Y73.23412
G01 X38.68139 Y73.31398
G01 X38.68601 Y73.32261
G01 X38.70765 Y73.37489
G01 X38.70765 Y73.77052
G01 X38.68601 Y73.82287
G01 X38.68139 Y73.83150
G01 X38.62803 Y73.91136
G01 X38.62180 Y73.91895
G01 X38.55388 Y73.98687
G01 X38.54629 Y73.99310
G01 X38.46643 Y74.04646
G01 X38.45780 Y74.05108
G01 X38.36905 Y74.08784
G01 X38.35967 Y74.09068
G01 X38.26544 Y74.10943
G01 X38.25569 Y74.11037
G01 X38.20768 Y74.11273
G01 X37.89054 Y74.11273
G01 X37.89054 Y76.57272
G01 X37.88817 Y76.62078
G01 X37.88723 Y76.63053
G01 X37.88342 Y76.64956
G01 X37.86846 Y76.72479
G01 X37.86562 Y76.73416
G01 X37.82884 Y76.82294
G01 X37.82422 Y76.83160
G01 X37.77080 Y76.91148
G01 X37.76458 Y76.91905
G01 X37.69661 Y76.98699
G01 X37.68901 Y76.99319
G01 X37.61591 Y77.04201
G01 X37.60844 Y77.04430
G01 X37.59864 Y77.04673
G01 X37.50364 Y77.06563
G01 X37.49384 Y77.06708
G01 X37.40517 Y77.07577
G01 X37.39536 Y77.07625
G01 X37.30563 Y77.07625
G01 X37.29582 Y77.07577
G01 X37.20565 Y77.06685
G01 X37.19585 Y77.06540
G01 X37.10187 Y77.04661
G01 X37.09204 Y77.04414
G01 X37.08493 Y77.04196
G01 X37.01154 Y76.99279
G01 X37.00395 Y76.98654
G01 X36.93608 Y76.91854
G01 X36.92986 Y76.91095
G01 X36.90123 Y76.87229
G01 X36.64517 Y76.48819
G01 X36.45922 Y76.30224
G01 X36.44096 Y76.29312
G01 X36.25191 Y76.19858
G01 X36.21000 Y76.17498
G01 X36.20172 Y76.16977
G01 X36.12582 Y76.11087
G01 X36.11871 Y76.10414
G01 X36.05577 Y76.03157
G01 X36.05010 Y76.02357
G01 X36.02414 Y75.97803
G01 X36.01282 Y75.93531
G01 X36.01073 Y75.92553
G01 X35.99587 Y75.83434
G01 X35.99476 Y75.82456
G01 X35.98904 Y75.73363
G01 X35.98892 Y75.72383
G01 X35.99212 Y75.63485
G01 X35.99295 Y75.62505
G01 X36.00520 Y75.53422
G01 X36.00700 Y75.52439
G01 X36.02414 Y75.45187
G01 X36.03400 Y75.43218
G01 X36.03921 Y75.42390
G01 X36.09811 Y75.34801
G01 X36.10484 Y75.34090
G01 X36.17741 Y75.27795
G01 X36.18541 Y75.27229
G01 X36.26887 Y75.22472
G01 X36.27781 Y75.22073
G01 X36.36895 Y75.19035
G01 X36.37850 Y75.18817
G01 X36.47380 Y75.17615
G01 X36.48361 Y75.17590
G01 X36.57941 Y75.18270
G01 X36.58909 Y75.18436
G01 X36.68173 Y75.20973
G01 X36.69087 Y75.21324
G01 X36.73489 Y75.23259
G01 X36.81055 Y75.27041
G01 X36.81055 Y74.11273
G01 X36.49341 Y74.11273
G01 X36.44538 Y74.11037
G01 X36.43562 Y74.10943
G01 X36.41657 Y74.10564
G01 X36.34139 Y74.09068
G01 X36.33202 Y74.08784
G01 X36.24327 Y74.05108
G01 X36.23463 Y74.04646
G01 X36.15478 Y73.99310
G01 X36.14718 Y73.98687
G01 X36.07926 Y73.91895
G01 X36.07304 Y73.91136
G01 X36.02414 Y73.83816
G01 X36.02186 Y73.83069
G01 X36.01940 Y73.82088
G01 X36.00073 Y73.72741
G01 X35.99928 Y73.71761
G01 X35.99036 Y73.62734
G01 X35.98988 Y73.61751
G01 X35.98988 Y73.52787
G01 X35.99036 Y73.51807
G01 X35.99928 Y73.42790
G01 X36.00073 Y73.41809
G01 X36.01940 Y73.32462
G01 X36.02186 Y73.31481
G01 X36.02414 Y73.30730
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.02414 Y73.83816 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.02414 Y73.83816
G01 X36.02414 Y75.45187
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.02414 Y75.97803 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.02414 Y75.97803
G01 X36.02417 Y77.04196
G01 X37.08493 Y77.04196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.61591 Y77.04201 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.61591 Y77.04201
G01 X39.51007 Y77.04196
G01 X39.54088 Y77.04922
G01 X39.59625 Y77.06063
G01 X39.60781 Y77.06266
G01 X39.71454 Y77.07513
G01 X39.72612 Y77.07582
G01 X39.77913 Y77.07734
G01 X40.49340 Y77.07734
G01 X40.54651 Y77.07579
G01 X40.55807 Y77.07513
G01 X40.66467 Y77.06266
G01 X40.67623 Y77.06063
G01 X40.73160 Y77.04922
G01 X40.76239 Y77.04196
G01 X44.36947 Y77.04196
G01 X44.37013 Y77.04214
G01 X44.47081 Y77.06368
G01 X44.48130 Y77.06533
G01 X44.57833 Y77.07556
G01 X44.58882 Y77.07612
G01 X44.63627 Y77.07734
G01 X46.06484 Y77.07734
G01 X46.10970 Y77.07625
G01 X46.11950 Y77.07577
G01 X46.20967 Y77.06685
G01 X46.21948 Y77.06540
G01 X46.31295 Y77.04673
G01 X46.32275 Y77.04427
G01 X46.33027 Y77.04198
G01 X46.40345 Y76.99309
G01 X46.41104 Y76.98687
G01 X46.47896 Y76.91895
G01 X46.48519 Y76.91135
G01 X46.53855 Y76.83150
G01 X46.54317 Y76.82286
G01 X46.57993 Y76.73411
G01 X46.58277 Y76.72474
G01 X46.60152 Y76.63050
G01 X46.60246 Y76.62075
G01 X46.60246 Y76.52471
G01 X46.60152 Y76.51496
G01 X46.58277 Y76.42073
G01 X46.57993 Y76.41135
G01 X46.54317 Y76.32261
G01 X46.53855 Y76.31397
G01 X46.48519 Y76.23411
G01 X46.47896 Y76.22652
G01 X46.41104 Y76.15860
G01 X46.40345 Y76.15238
G01 X46.32359 Y76.09901
G01 X46.31495 Y76.09439
G01 X46.22621 Y76.05763
G01 X46.21683 Y76.05479
G01 X46.12260 Y76.03604
G01 X46.11285 Y76.03510
G01 X46.06484 Y76.03274
G01 X45.12494 Y76.03274
G01 X45.11867 Y75.96988
G01 X45.63627 Y75.96988
G01 X45.69293 Y75.96660
G01 X45.70441 Y75.96525
G01 X45.81475 Y75.93922
G01 X45.82562 Y75.93526
G01 X45.87780 Y75.91285
G01 X46.16349 Y75.76998
G01 X46.19796 Y75.75098
G01 X46.20485 Y75.74681
G01 X46.26870 Y75.70079
G01 X46.27480 Y75.69558
G01 X46.30375 Y75.66889
G01 X46.44663 Y75.52604
G01 X46.47337 Y75.49706
G01 X46.47858 Y75.49093
G01 X46.52463 Y75.42703
G01 X46.52880 Y75.42017
G01 X46.54782 Y75.38565
G01 X46.69067 Y75.09993
G01 X46.71307 Y75.04775
G01 X46.71701 Y75.03688
G01 X46.74305 Y74.92660
G01 X46.74439 Y74.91509
G01 X46.74767 Y74.85842
G01 X46.74767 Y74.14415
G01 X46.74439 Y74.08751
G01 X46.74305 Y74.07600
G01 X46.71701 Y73.96571
G01 X46.71307 Y73.95484
G01 X46.69067 Y73.90267
G01 X46.54782 Y73.61695
G01 X46.52880 Y73.58243
G01 X46.52463 Y73.57557
G01 X46.47858 Y73.51166
G01 X46.47337 Y73.50554
G01 X46.44663 Y73.47656
G01 X46.30375 Y73.33371
G01 X46.27480 Y73.30702
G01 X46.26868 Y73.30181
G01 X46.20482 Y73.25578
G01 X46.19794 Y73.25162
G01 X46.16344 Y73.23259
G01 X45.90523 Y73.10351
G01 X45.87449 Y73.09625
G01 X45.81910 Y73.08484
G01 X45.80754 Y73.08284
G01 X45.70094 Y73.07036
G01 X45.68938 Y73.06968
G01 X45.63624 Y73.06813
G01 X44.92197 Y73.06813
G01 X44.86896 Y73.06968
G01 X44.85735 Y73.07034
G01 X44.75065 Y73.08284
G01 X44.73909 Y73.08484
G01 X44.68369 Y73.09625
G01 X44.65293 Y73.10351
G01 X44.39477 Y73.23259
G01 X44.36027 Y73.25162
G01 X44.35339 Y73.25578
G01 X44.28953 Y73.30181
G01 X44.28341 Y73.30702
G01 X44.25446 Y73.33371
G01 X44.11158 Y73.47656
G01 X44.07927 Y73.51220
G01 X44.07307 Y73.51977
G01 X44.01968 Y73.59962
G01 X44.01506 Y73.60829
G01 X43.97831 Y73.69701
G01 X43.97546 Y73.70641
G01 X43.95672 Y73.80061
G01 X43.95575 Y73.81037
G01 X43.95573 Y73.90641
G01 X43.95669 Y73.91618
G01 X43.97544 Y74.01039
G01 X43.97828 Y74.01977
G01 X44.01504 Y74.10851
G01 X44.01963 Y74.11715
G01 X44.07300 Y74.19703
G01 X44.07922 Y74.20460
G01 X44.14714 Y74.27255
G01 X44.15471 Y74.27874
G01 X44.23457 Y74.33214
G01 X44.24323 Y74.33676
G01 X44.33195 Y74.37351
G01 X44.34135 Y74.37636
G01 X44.43556 Y74.39510
G01 X44.44531 Y74.39607
G01 X44.54135 Y74.39609
G01 X44.55113 Y74.39513
G01 X44.64534 Y74.37638
G01 X44.65471 Y74.37354
G01 X44.74346 Y74.33678
G01 X44.75209 Y74.33219
G01 X44.83198 Y74.27882
G01 X44.83955 Y74.27260
G01 X44.87518 Y74.24031
G01 X44.95611 Y74.15939
G01 X45.04943 Y74.11273
G01 X45.50878 Y74.11273
G01 X45.60210 Y74.15939
G01 X45.62103 Y74.17834
G01 X45.66769 Y74.27163
G01 X45.66769 Y74.73097
G01 X45.62103 Y74.82426
G01 X45.60208 Y74.84321
G01 X45.50876 Y74.88989
G01 X45.04945 Y74.88989
G01 X44.95613 Y74.84321
G01 X44.87518 Y74.76228
G01 X44.84097 Y74.73117
G01 X44.83370 Y74.72515
G01 X44.75722 Y74.67323
G01 X44.74894 Y74.66871
G01 X44.66411 Y74.63206
G01 X44.65512 Y74.62916
G01 X44.56489 Y74.60912
G01 X44.55555 Y74.60795
G01 X44.46314 Y74.60521
G01 X44.45374 Y74.60582
G01 X44.36248 Y74.62048
G01 X44.35336 Y74.62284
G01 X44.26647 Y74.65439
G01 X44.25794 Y74.65842
G01 X44.17854 Y74.70569
G01 X44.17092 Y74.71126
G01 X44.10180 Y74.77262
G01 X44.09538 Y74.77953
G01 X44.03899 Y74.85276
G01 X44.03396 Y74.86076
G01 X43.99235 Y74.94328
G01 X43.98892 Y74.95205
G01 X43.96355 Y75.04095
G01 X43.96182 Y75.05022
G01 X43.95359 Y75.14227
G01 X43.95364 Y75.15169
G01 X43.95606 Y75.19789
G01 X44.09893 Y76.62647
G01 X44.10673 Y76.67734
G01 X44.10886 Y76.68760
G01 X44.14021 Y76.78550
G01 X44.14445 Y76.79510
G01 X44.19553 Y76.88430
G01 X44.20165 Y76.89281
G01 X44.27020 Y76.96939
G01 X44.27800 Y76.97643
G01 X44.36101 Y77.03703
G01 X44.36947 Y77.04196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.33027 Y77.04198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.33027 Y77.04198
G01 X49.22785 Y77.04196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.36438 Y81.21965 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.36438 Y81.21965
G01 X47.30949 Y81.40065
G01 X47.29077 Y81.49486
G01 X47.27154 Y81.68996
G01 X47.26918 Y81.73796
G01 X47.26918 Y82.33799
G01 X47.27154 Y82.38599
G01 X47.29077 Y82.58109
G01 X47.30949 Y82.67530
G01 X47.36514 Y82.85871
G01 X47.36817 Y82.86234
G01 X47.36880 Y82.86328
G01 X47.39456 Y82.90103
G01 X47.42333 Y82.94093
G01 X47.43652 Y82.95828
G01 X47.50817 Y83.06783
G01 X47.52961 Y83.10641
G01 X47.55204 Y83.14456
G01 X47.57873 Y83.17995
G01 X47.66918 Y83.29389
G01 X47.70317 Y83.33141
G01 X47.76573 Y83.39397
G01 X47.80327 Y83.42800
G01 X47.91719 Y83.51843
G01 X47.95259 Y83.54512
G01 X47.99080 Y83.56760
G01 X48.11795 Y83.63826
G01 X48.16372 Y83.65990
G01 X48.24548 Y83.69379
G01 X48.29316 Y83.71083
G01 X48.43306 Y83.75079
G01 X48.47591 Y83.76189
G01 X48.51980 Y83.76803
G01 X48.66433 Y83.78467
G01 X48.71492 Y83.78716
G01 X48.80344 Y83.78716
G01 X48.85402 Y83.78467
G01 X48.99854 Y83.76803
G01 X49.04243 Y83.76189
G01 X49.08528 Y83.75079
G01 X49.22519 Y83.71083
G01 X49.27286 Y83.69379
G01 X49.35462 Y83.65990
G01 X49.40037 Y83.63826
G01 X49.52755 Y83.56760
G01 X49.56577 Y83.54512
G01 X49.60116 Y83.51843
G01 X49.71510 Y83.42798
G01 X49.75264 Y83.39397
G01 X49.81515 Y83.33146
G01 X49.84916 Y83.29392
G01 X49.92991 Y83.19219
G01 X49.93971 Y83.18005
G01 X49.96575 Y83.14837
G01 X49.98508 Y83.12404
G01 X49.99577 Y83.11010
G01 X50.07738 Y83.02241
G01 X50.11520 Y82.95165
G01 X50.15196 Y82.86290
G01 X50.20888 Y82.67530
G01 X50.22762 Y82.58109
G01 X50.23039 Y82.55282
G01 X50.24682 Y82.38599
G01 X50.24919 Y82.33799
G01 X50.24919 Y81.73796
G01 X50.24682 Y81.68996
G01 X50.22762 Y81.49486
G01 X50.20888 Y81.40065
G01 X50.15196 Y81.21305
G01 X50.11520 Y81.12430
G01 X50.08117 Y81.06065
G01 X50.06049 Y81.03916
G01 X50.01347 Y80.98508
G01 X49.99679 Y80.96535
G01 X49.93971 Y80.89593
G01 X49.92991 Y80.88379
G01 X49.84916 Y80.78206
G01 X49.81515 Y80.74452
G01 X49.75264 Y80.68201
G01 X49.71510 Y80.64800
G01 X49.60116 Y80.55755
G01 X49.56575 Y80.53085
G01 X49.52755 Y80.50837
G01 X49.40039 Y80.43771
G01 X49.35462 Y80.41607
G01 X49.27286 Y80.38219
G01 X49.22519 Y80.36514
G01 X49.08528 Y80.32519
G01 X49.04243 Y80.31409
G01 X48.99854 Y80.30794
G01 X48.85399 Y80.29131
G01 X48.80344 Y80.28882
G01 X48.71492 Y80.28882
G01 X48.66433 Y80.29131
G01 X48.51980 Y80.30794
G01 X48.47591 Y80.31409
G01 X48.43306 Y80.32519
G01 X48.29316 Y80.36514
G01 X48.24548 Y80.38219
G01 X48.16372 Y80.41607
G01 X48.11795 Y80.43771
G01 X47.99080 Y80.50837
G01 X47.95259 Y80.53085
G01 X47.91719 Y80.55755
G01 X47.80327 Y80.64797
G01 X47.76573 Y80.68201
G01 X47.70317 Y80.74457
G01 X47.66918 Y80.78208
G01 X47.57873 Y80.89603
G01 X47.55204 Y80.93141
G01 X47.52961 Y80.96956
G01 X47.50817 Y81.00814
G01 X47.46253 Y81.08173
G01 X47.43578 Y81.12064
G01 X47.42504 Y81.13596
G01 X47.36908 Y81.21391
G01 X47.36441 Y81.21965
G01 X47.36438 Y81.21965
G01 X47.36423 Y81.21988
G01 X47.26789 Y81.27248
G01 X47.20302 Y81.29844
G01 X47.11361 Y81.32468
G01 X47.02090 Y81.33352
G01 X46.92816 Y81.32465
G01 X46.85956 Y81.31142
G01 X46.77020 Y81.28516
G01 X46.68745 Y81.24251
G01 X46.64955 Y81.21269
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.96510 Y83.06755 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.96510 Y83.06755
G01 X43.90317 Y82.95165
G01 X43.86639 Y82.86290
G01 X43.80950 Y82.67530
G01 X43.79075 Y82.58109
G01 X43.77155 Y82.38599
G01 X43.76919 Y82.33799
G01 X43.76919 Y81.73796
G01 X43.77155 Y81.68996
G01 X43.79075 Y81.49486
G01 X43.79591 Y81.46900
G01 X43.80950 Y81.40065
G01 X43.86639 Y81.21305
G01 X43.90317 Y81.12430
G01 X43.96487 Y81.00888
G01 X44.01453 Y80.96159
G01 X44.05065 Y80.92041
G01 X44.07544 Y80.89329
G01 X44.08062 Y80.88782
G01 X44.13370 Y80.82676
G01 X44.16916 Y80.78211
G01 X44.20322 Y80.74454
G01 X44.26573 Y80.68201
G01 X44.30327 Y80.64797
G01 X44.41719 Y80.55755
G01 X44.45260 Y80.53085
G01 X44.49080 Y80.50837
G01 X44.61798 Y80.43771
G01 X44.66373 Y80.41607
G01 X44.68836 Y80.40484
G01 X44.74549 Y80.38219
G01 X44.79314 Y80.36514
G01 X44.93307 Y80.32519
G01 X44.97592 Y80.31409
G01 X45.01981 Y80.30794
G01 X45.16433 Y80.29131
G01 X45.21491 Y80.28882
G01 X45.30343 Y80.28882
G01 X45.35400 Y80.29131
G01 X45.49855 Y80.30794
G01 X45.54244 Y80.31409
G01 X45.58529 Y80.32519
G01 X45.72519 Y80.36514
G01 X45.77287 Y80.38219
G01 X45.85463 Y80.41607
G01 X45.90040 Y80.43771
G01 X46.02755 Y80.50837
G01 X46.06576 Y80.53085
G01 X46.10116 Y80.55757
G01 X46.21508 Y80.64800
G01 X46.25262 Y80.68203
G01 X46.31518 Y80.74457
G01 X46.34917 Y80.78208
G01 X46.43962 Y80.89603
G01 X46.46629 Y80.93141
G01 X46.48874 Y80.96956
G01 X46.51018 Y81.00814
G01 X46.58183 Y81.11769
G01 X46.59502 Y81.13504
G01 X46.62379 Y81.17495
G01 X46.64955 Y81.21269
G01 X46.65018 Y81.21363
G01 X46.65326 Y81.21731
G01 X46.70888 Y81.40065
G01 X46.72760 Y81.49486
G01 X46.74683 Y81.68996
G01 X46.74919 Y81.73796
G01 X46.74919 Y82.33799
G01 X46.74683 Y82.38599
G01 X46.72760 Y82.58109
G01 X46.70888 Y82.67530
G01 X46.65397 Y82.85627
G01 X46.64927 Y82.86206
G01 X46.59331 Y82.94002
G01 X46.58257 Y82.95533
G01 X46.55582 Y82.99425
G01 X46.51018 Y83.06783
G01 X46.48874 Y83.10641
G01 X46.46629 Y83.14456
G01 X46.43962 Y83.17995
G01 X46.34917 Y83.29389
G01 X46.31518 Y83.33141
G01 X46.25262 Y83.39394
G01 X46.21508 Y83.42798
G01 X46.10116 Y83.51840
G01 X46.06576 Y83.54512
G01 X46.02755 Y83.56760
G01 X45.90038 Y83.63826
G01 X45.85463 Y83.65990
G01 X45.77287 Y83.69379
G01 X45.72519 Y83.71083
G01 X45.58529 Y83.75079
G01 X45.54244 Y83.76189
G01 X45.49855 Y83.76803
G01 X45.35400 Y83.78467
G01 X45.30343 Y83.78716
G01 X45.21491 Y83.78716
G01 X45.16433 Y83.78467
G01 X45.01981 Y83.76803
G01 X44.97592 Y83.76189
G01 X44.93307 Y83.75079
G01 X44.79316 Y83.71083
G01 X44.74549 Y83.69379
G01 X44.66373 Y83.65990
G01 X44.61796 Y83.63826
G01 X44.49080 Y83.56760
G01 X44.45260 Y83.54512
G01 X44.41719 Y83.51843
G01 X44.30325 Y83.42798
G01 X44.26571 Y83.39397
G01 X44.20320 Y83.33146
G01 X44.16919 Y83.29389
G01 X44.13376 Y83.24929
G01 X44.07541 Y83.18271
G01 X44.04638 Y83.15267
G01 X44.01237 Y83.11556
G01 X43.99855 Y83.09968
G01 X43.96512 Y83.06758
G01 X43.95326 Y83.05617
G01 X43.92692 Y83.04055
G01 X43.83929 Y83.00903
G01 X43.74727 Y82.99465
G01 X43.67752 Y82.99049
G01 X43.58440 Y82.99381
G01 X43.49360 Y83.01469
G01 X43.40841 Y83.05236
G01 X43.34747 Y83.08658
G01 X43.25555 Y83.15330
G01 X43.24216 Y83.16885
G01 X43.23480 Y83.18404
G01 X43.24397 Y83.16511
G01 X43.24684 Y83.13600
G01 X43.24917 Y83.08797
G01 X43.24917 Y80.98798
G01 X43.24684 Y80.93995
G01 X43.24349 Y80.90596
G01 X43.24270 Y80.90421
G01 X43.23703 Y80.89171
G01 X43.20655 Y80.82628
G01 X43.19586 Y80.80538
G01 X43.17445 Y80.76062
G01 X43.15078 Y80.70754
G01 X43.13775 Y80.67960
G01 X43.12177 Y80.64680
G01 X43.11524 Y80.63606
G01 X43.06579 Y80.56298
G01 X43.04859 Y80.54005
G01 X43.03488 Y80.52493
G01 X42.97231 Y80.46235
G01 X42.95710 Y80.44856
G01 X42.93429 Y80.43144
G01 X42.86083 Y80.38175
G01 X42.85039 Y80.37540
G01 X42.81727 Y80.35928
G01 X42.73604 Y80.32455
G01 X42.73203 Y80.32306
G01 X42.68880 Y80.31142
G01 X42.60249 Y80.29270
G01 X42.60092 Y80.29242
G01 X42.58428 Y80.29103
G01 X42.56452 Y80.28937
G01 X42.55362 Y80.28884
G01 X42.50917 Y80.28772
G01 X41.00920 Y80.28772
G01 X40.96478 Y80.28884
G01 X40.95373 Y80.28937
G01 X40.93003 Y80.29136
G01 X40.91748 Y80.29242
G01 X40.91588 Y80.29270
G01 X40.82955 Y80.31142
G01 X40.78629 Y80.32306
G01 X40.78230 Y80.32453
G01 X40.70107 Y80.35928
G01 X40.66798 Y80.37540
G01 X40.65751 Y80.38175
G01 X40.58405 Y80.43146
G01 X40.56125 Y80.44856
G01 X40.54603 Y80.46237
G01 X40.48347 Y80.52493
G01 X40.46975 Y80.54007
G01 X40.45256 Y80.56298
G01 X40.42292 Y80.60489
G01 X40.40310 Y80.63606
G01 X40.39660 Y80.64678
G01 X40.38060 Y80.67960
G01 X40.34570 Y80.76118
G01 X40.34423 Y80.76514
G01 X40.33259 Y80.80842
G01 X40.31382 Y80.89491
G01 X40.31360 Y80.89626
G01 X40.31055 Y80.93263
G01 X40.31001 Y80.94378
G01 X40.30892 Y80.98800
G01 X40.30892 Y83.08797
G01 X40.31001 Y83.13219
G01 X40.31055 Y83.14334
G01 X40.31360 Y83.17974
G01 X40.31382 Y83.18106
G01 X40.33259 Y83.26755
G01 X40.34423 Y83.31083
G01 X40.34570 Y83.31479
G01 X40.38060 Y83.39638
G01 X40.39660 Y83.42917
G01 X40.40310 Y83.43991
G01 X40.45256 Y83.51299
G01 X40.46975 Y83.53590
G01 X40.48347 Y83.55104
G01 X40.54603 Y83.61360
G01 X40.56125 Y83.62742
G01 X40.58405 Y83.64451
G01 X40.65751 Y83.69422
G01 X40.66798 Y83.70057
G01 X40.70107 Y83.71670
G01 X40.78230 Y83.75145
G01 X40.78629 Y83.75292
G01 X40.82955 Y83.76455
G01 X40.91588 Y83.78327
G01 X40.91740 Y83.78355
G01 X40.95383 Y83.78660
G01 X40.96478 Y83.78713
G01 X41.00920 Y83.78822
G01 X42.50917 Y83.78822
G01 X42.55362 Y83.78713
G01 X42.56452 Y83.78660
G01 X42.60092 Y83.78355
G01 X42.60249 Y83.78327
G01 X42.68880 Y83.76455
G01 X42.73203 Y83.75292
G01 X42.73604 Y83.75142
G01 X42.81727 Y83.71670
G01 X42.85037 Y83.70057
G01 X42.86083 Y83.69422
G01 X42.89164 Y83.67466
G01 X42.93429 Y83.64454
G01 X42.95710 Y83.62742
G01 X42.97231 Y83.61363
G01 X43.03488 Y83.55104
G01 X43.04859 Y83.53593
G01 X43.06579 Y83.51299
G01 X43.11524 Y83.43991
G01 X43.12174 Y83.42920
G01 X43.13775 Y83.39638
G01 X43.15072 Y83.36854
G01 X43.17445 Y83.31535
G01 X43.18407 Y83.29442
G01 X43.19548 Y83.27050
G01 X43.20312 Y83.25404
G01 X43.23480 Y83.18404
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.24270 Y80.90421 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.24270 Y80.90421
G01 X43.29997 Y80.96024
G01 X43.37775 Y81.01162
G01 X43.46383 Y81.04734
G01 X43.53063 Y81.06786
G01 X43.62182 Y81.08663
G01 X43.71491 Y81.08780
G01 X43.80653 Y81.07136
G01 X43.87381 Y81.05254
G01 X43.95319 Y81.02001
G01 X44.01453 Y80.96159
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.65397 Y82.85627 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.65397 Y82.85627
G01 X46.75046 Y82.80349
G01 X46.81533 Y82.77753
G01 X46.90474 Y82.75130
G01 X46.99745 Y82.74246
G01 X47.09019 Y82.75132
G01 X47.15879 Y82.76455
G01 X47.24815 Y82.79082
G01 X47.33090 Y82.83346
G01 X47.36880 Y82.86328
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.06049 Y81.03916 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.06049 Y81.03916
G01 X50.08167 Y81.06113
G01 X50.13580 Y81.09326
G01 X50.22343 Y81.12478
G01 X50.31545 Y81.13916
G01 X50.38520 Y81.14332
G01 X50.47832 Y81.14000
G01 X50.56912 Y81.11912
G01 X50.65432 Y81.08145
G01 X50.71525 Y81.04723
G01 X50.79734 Y80.98932
G01 X50.86590 Y80.91589
G01 X50.88457 Y80.89125
G01 X50.91683 Y80.84266
G01 X51.04614 Y80.67416
G01 X51.19536 Y80.52491
G01 X51.31916 Y80.42991
G01 X51.31916 Y80.58813
G01 X51.24123 Y80.65209
G01 X51.17331 Y80.72001
G01 X51.04893 Y80.87154
G01 X50.99557 Y80.95143
G01 X50.90316 Y81.12430
G01 X50.86641 Y81.21305
G01 X50.80951 Y81.40065
G01 X50.79077 Y81.49486
G01 X50.77154 Y81.68996
G01 X50.76918 Y81.73796
G01 X50.76918 Y82.33799
G01 X50.77154 Y82.38599
G01 X50.79077 Y82.58109
G01 X50.80951 Y82.67530
G01 X50.86641 Y82.86290
G01 X50.90316 Y82.95165
G01 X50.99557 Y83.12452
G01 X51.04893 Y83.20441
G01 X51.17331 Y83.35594
G01 X51.24123 Y83.42386
G01 X51.31916 Y83.48782
G01 X51.31916 Y83.64606
G01 X51.19536 Y83.55107
G01 X51.04614 Y83.40181
G01 X50.89808 Y83.20888
G01 X50.89762 Y83.20923
G01 X50.83219 Y83.12607
G01 X50.78165 Y83.07786
G01 X50.70844 Y83.02026
G01 X50.62564 Y82.97756
G01 X50.53626 Y82.95130
G01 X50.46765 Y82.93806
G01 X50.37487 Y82.92920
G01 X50.28208 Y82.93806
G01 X50.19265 Y82.96433
G01 X50.12777 Y82.99031
G01 X50.08764 Y83.01139
G01 X50.07738 Y83.02241
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.19917 Y83.48784 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.19917 Y83.48784
G01 X53.27715 Y83.42386
G01 X53.34507 Y83.35594
G01 X53.46942 Y83.20441
G01 X53.52279 Y83.12452
G01 X53.60112 Y82.97799
G01 X53.73673 Y82.97799
G01 X53.70623 Y83.05162
G01 X53.68408 Y83.09000
G01 X53.60072 Y83.23438
G01 X53.47222 Y83.40184
G01 X53.32302 Y83.55104
G01 X53.19917 Y83.64606
G01 X53.19917 Y83.48784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.19917 Y80.42991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.19917 Y80.42991
G01 X53.32302 Y80.52493
G01 X53.47222 Y80.67413
G01 X53.60072 Y80.84160
G01 X53.70623 Y81.02437
G01 X53.73673 Y81.09798
G01 X53.60115 Y81.09798
G01 X53.52279 Y80.95143
G01 X53.46942 Y80.87154
G01 X53.34507 Y80.72001
G01 X53.27715 Y80.65209
G01 X53.19917 Y80.58810
G01 X53.19917 Y80.42991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.61515 Y77.04196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.61515 Y77.04196
G01 X55.47912 Y77.04196
G01 X55.61534 Y77.06406
G01 X55.65210 Y77.06929
G01 X55.66015 Y77.07028
G01 X55.73515 Y77.07633
G01 X55.74321 Y77.07666
G01 X55.77912 Y77.07734
G01 X56.20770 Y77.07734
G01 X56.26081 Y77.07579
G01 X56.27236 Y77.07513
G01 X56.37897 Y77.06266
G01 X56.39053 Y77.06063
G01 X56.44592 Y77.04922
G01 X56.47668 Y77.04196
G01 X56.73487 Y76.91288
G01 X56.77678 Y76.88928
G01 X56.78506 Y76.88407
G01 X56.86096 Y76.82517
G01 X56.86807 Y76.81844
G01 X56.93101 Y76.74587
G01 X56.93668 Y76.73787
G01 X56.98425 Y76.65441
G01 X56.98824 Y76.64547
G01 X57.01862 Y76.55433
G01 X57.02080 Y76.54478
G01 X57.03282 Y76.44948
G01 X57.03307 Y76.43967
G01 X57.02626 Y76.34387
G01 X57.02461 Y76.33419
G01 X56.99924 Y76.24155
G01 X56.99573 Y76.23241
G01 X56.95278 Y76.14648
G01 X56.94757 Y76.13820
G01 X56.88867 Y76.06231
G01 X56.88194 Y76.05519
G01 X56.80937 Y75.99225
G01 X56.80137 Y75.98659
G01 X56.71791 Y75.93902
G01 X56.70896 Y75.93503
G01 X56.68331 Y75.92647
G01 X56.61783 Y75.90465
G01 X56.60828 Y75.90246
G01 X56.51298 Y75.89045
G01 X56.50317 Y75.89020
G01 X56.40737 Y75.89700
G01 X56.39769 Y75.89865
G01 X56.30505 Y75.92403
G01 X56.29591 Y75.92753
G01 X56.25189 Y75.94689
G01 X56.08021 Y76.03274
G01 X55.86673 Y76.03274
G01 X55.64224 Y75.95791
G01 X55.50861 Y75.82428
G01 X55.43147 Y75.66998
G01 X55.31910 Y75.22053
G01 X55.31910 Y74.92492
G01 X55.43147 Y74.47549
G01 X55.50861 Y74.32119
G01 X55.64224 Y74.18756
G01 X55.86673 Y74.11273
G01 X55.97719 Y74.11273
G01 X56.09627 Y74.15243
G01 X56.09627 Y74.31844
G01 X56.06482 Y74.31844
G01 X56.01679 Y74.32081
G01 X56.00704 Y74.32175
G01 X55.91280 Y74.34049
G01 X55.90343 Y74.34334
G01 X55.81468 Y74.38009
G01 X55.80605 Y74.38471
G01 X55.72619 Y74.43808
G01 X55.71859 Y74.44430
G01 X55.65067 Y74.51222
G01 X55.64445 Y74.51982
G01 X55.59109 Y74.59967
G01 X55.58646 Y74.60831
G01 X55.54971 Y74.69706
G01 X55.54686 Y74.70643
G01 X55.52812 Y74.80066
G01 X55.52718 Y74.81042
G01 X55.52718 Y74.90645
G01 X55.52812 Y74.91621
G01 X55.54686 Y75.01044
G01 X55.54971 Y75.01981
G01 X55.58646 Y75.10856
G01 X55.59109 Y75.11720
G01 X55.64445 Y75.19706
G01 X55.65067 Y75.20465
G01 X55.71859 Y75.27257
G01 X55.72619 Y75.27879
G01 X55.80605 Y75.33216
G01 X55.81468 Y75.33678
G01 X55.90343 Y75.37354
G01 X55.91280 Y75.37638
G01 X56.00704 Y75.39513
G01 X56.01679 Y75.39606
G01 X56.06482 Y75.39843
G01 X56.63627 Y75.39843
G01 X56.68428 Y75.39606
G01 X56.69403 Y75.39513
G01 X56.78826 Y75.37638
G01 X56.79764 Y75.37354
G01 X56.88638 Y75.33678
G01 X56.89502 Y75.33216
G01 X56.97488 Y75.27879
G01 X56.98247 Y75.27257
G01 X57.05039 Y75.20465
G01 X57.05661 Y75.19706
G01 X57.10175 Y75.12949
G01 X57.10604 Y75.11545
G01 X57.10848 Y75.10567
G01 X57.12707 Y75.01255
G01 X57.12852 Y75.00275
G01 X57.13741 Y74.91283
G01 X57.13789 Y74.90303
G01 X57.13899 Y74.85842
G01 X57.13899 Y73.85845
G01 X57.13789 Y73.81375
G01 X57.13741 Y73.80394
G01 X57.12852 Y73.71415
G01 X57.12707 Y73.70435
G01 X57.10848 Y73.61123
G01 X57.10604 Y73.60145
G01 X57.10175 Y73.58736
G01 X57.05659 Y73.51977
G01 X57.05037 Y73.51220
G01 X57.01806 Y73.47656
G01 X56.87518 Y73.33371
G01 X56.83279 Y73.29597
G01 X56.82372 Y73.28880
G01 X56.72733 Y73.22924
G01 X56.71684 Y73.22434
G01 X56.66413 Y73.20331
G01 X56.36469 Y73.10351
G01 X56.22857 Y73.08141
G01 X56.19180 Y73.07618
G01 X56.18377 Y73.07522
G01 X56.10886 Y73.06917
G01 X56.10084 Y73.06884
G01 X56.06482 Y73.06813
G01 X55.77912 Y73.06813
G01 X55.74321 Y73.06884
G01 X55.73515 Y73.06915
G01 X55.66012 Y73.07522
G01 X55.65210 Y73.07618
G01 X55.61532 Y73.08141
G01 X55.47915 Y73.10351
G01 X51.04807 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.65295 Y73.10351 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.65295 Y73.10351
G01 X49.39476 Y73.23259
G01 X49.36026 Y73.25162
G01 X49.35338 Y73.25578
G01 X49.28950 Y73.30181
G01 X49.28338 Y73.30702
G01 X49.25442 Y73.33376
G01 X49.11157 Y73.47661
G01 X49.07926 Y73.51222
G01 X49.07304 Y73.51982
G01 X49.01967 Y73.59968
G01 X49.01505 Y73.60831
G01 X48.97830 Y73.69706
G01 X48.97545 Y73.70643
G01 X48.95671 Y73.80067
G01 X48.95577 Y73.81042
G01 X48.95577 Y73.90646
G01 X48.95671 Y73.91621
G01 X48.97545 Y74.01044
G01 X48.97830 Y74.01982
G01 X49.01505 Y74.10856
G01 X49.01967 Y74.11720
G01 X49.07304 Y74.19706
G01 X49.07926 Y74.20465
G01 X49.14718 Y74.27257
G01 X49.15478 Y74.27880
G01 X49.23463 Y74.33216
G01 X49.24327 Y74.33678
G01 X49.33202 Y74.37354
G01 X49.34139 Y74.37638
G01 X49.43562 Y74.39513
G01 X49.44538 Y74.39607
G01 X49.54142 Y74.39607
G01 X49.55117 Y74.39513
G01 X49.64540 Y74.37638
G01 X49.65478 Y74.37354
G01 X49.74352 Y74.33678
G01 X49.75216 Y74.33216
G01 X49.83202 Y74.27880
G01 X49.83961 Y74.27257
G01 X49.87522 Y74.24026
G01 X49.95612 Y74.15939
G01 X50.04944 Y74.11273
G01 X50.65162 Y74.11273
G01 X50.74494 Y74.15939
G01 X50.76387 Y74.17831
G01 X50.81055 Y74.27166
G01 X50.81055 Y74.73094
G01 X50.76387 Y74.82429
G01 X50.74494 Y74.84321
G01 X50.65160 Y74.88989
G01 X50.35056 Y74.88989
G01 X50.30387 Y74.89210
G01 X50.29440 Y74.89302
G01 X50.20273 Y74.91072
G01 X50.19359 Y74.91341
G01 X50.10695 Y74.94819
G01 X50.09849 Y74.95256
G01 X50.02003 Y75.00313
G01 X50.01253 Y75.00902
G01 X49.94507 Y75.07354
G01 X49.93885 Y75.08075
G01 X49.88487 Y75.15690
G01 X49.88012 Y75.16515
G01 X49.84154 Y75.25017
G01 X49.83844 Y75.25918
G01 X49.81670 Y75.34996
G01 X49.81538 Y75.35939
G01 X49.81124 Y75.45266
G01 X49.81172 Y75.46218
G01 X49.82534 Y75.55454
G01 X49.82762 Y75.56378
G01 X49.85851 Y75.65187
G01 X49.86250 Y75.66050
G01 X49.90954 Y75.74115
G01 X49.91510 Y75.74890
G01 X49.94416 Y75.78547
G01 X50.16051 Y76.03274
G01 X49.49341 Y76.03274
G01 X49.44538 Y76.03510
G01 X49.43562 Y76.03604
G01 X49.34139 Y76.05479
G01 X49.33202 Y76.05763
G01 X49.24327 Y76.09439
G01 X49.23463 Y76.09901
G01 X49.15478 Y76.15238
G01 X49.14718 Y76.15860
G01 X49.07926 Y76.22652
G01 X49.07304 Y76.23411
G01 X49.01967 Y76.31397
G01 X49.01505 Y76.32261
G01 X48.97830 Y76.41135
G01 X48.97545 Y76.42073
G01 X48.95671 Y76.51496
G01 X48.95577 Y76.52471
G01 X48.95577 Y76.62075
G01 X48.95671 Y76.63050
G01 X48.97545 Y76.72474
G01 X48.97830 Y76.73411
G01 X49.01505 Y76.82286
G01 X49.01967 Y76.83150
G01 X49.07304 Y76.91135
G01 X49.07926 Y76.91895
G01 X49.14718 Y76.98687
G01 X49.15478 Y76.99309
G01 X49.22785 Y77.04196
G01 X49.23545 Y77.04427
G01 X49.24525 Y77.04673
G01 X49.33872 Y77.06540
G01 X49.34853 Y77.06685
G01 X49.43880 Y77.07577
G01 X49.44863 Y77.07625
G01 X49.49341 Y77.07734
G01 X51.35056 Y77.07734
G01 X51.39432 Y77.07630
G01 X51.40384 Y77.07584
G01 X51.49122 Y77.06744
G01 X51.50075 Y77.06606
G01 X51.59099 Y77.04859
G01 X51.60049 Y77.04628
G01 X51.61515 Y77.04196
G01 X51.68106 Y76.99949
G01 X51.68855 Y76.99360
G01 X51.75602 Y76.92908
G01 X51.76224 Y76.92187
G01 X51.81621 Y76.84572
G01 X51.82096 Y76.83746
G01 X51.85955 Y76.75245
G01 X51.86264 Y76.74343
G01 X51.88439 Y76.65265
G01 X51.88492 Y76.64889
G01 X51.88571 Y76.64323
G01 X51.88985 Y76.54996
G01 X51.88937 Y76.54044
G01 X51.87575 Y76.44808
G01 X51.87347 Y76.43884
G01 X51.84258 Y76.35075
G01 X51.83859 Y76.34211
G01 X51.79155 Y76.26147
G01 X51.78599 Y76.25372
G01 X51.75693 Y76.21715
G01 X51.34619 Y75.74773
G01 X51.34771 Y75.74681
G01 X51.41159 Y75.70076
G01 X51.41769 Y75.69556
G01 X51.44664 Y75.66884
G01 X51.58949 Y75.52599
G01 X51.61621 Y75.49703
G01 X51.62142 Y75.49093
G01 X51.66747 Y75.42705
G01 X51.67164 Y75.42017
G01 X51.69066 Y75.38568
G01 X51.83354 Y75.09995
G01 X51.85594 Y75.04778
G01 X51.85988 Y75.03691
G01 X51.88591 Y74.92660
G01 X51.88726 Y74.91512
G01 X51.89053 Y74.85842
G01 X51.89053 Y74.14415
G01 X51.88726 Y74.08748
G01 X51.88591 Y74.07600
G01 X51.85988 Y73.96569
G01 X51.85594 Y73.95482
G01 X51.83354 Y73.90265
G01 X51.69066 Y73.61692
G01 X51.67164 Y73.58243
G01 X51.66747 Y73.57555
G01 X51.62142 Y73.51166
G01 X51.61621 Y73.50557
G01 X51.58949 Y73.47661
G01 X51.44664 Y73.33376
G01 X51.41769 Y73.30702
G01 X51.41157 Y73.30181
G01 X51.34769 Y73.25578
G01 X51.34080 Y73.25162
G01 X51.30631 Y73.23259
G01 X51.04807 Y73.10351
G01 X51.01731 Y73.09625
G01 X50.96194 Y73.08484
G01 X50.95038 Y73.08284
G01 X50.84377 Y73.07036
G01 X50.83222 Y73.06968
G01 X50.77911 Y73.06813
G01 X49.92196 Y73.06813
G01 X49.86897 Y73.06968
G01 X49.85737 Y73.07034
G01 X49.75066 Y73.08284
G01 X49.73910 Y73.08484
G01 X49.68373 Y73.09625
G01 X49.65295 Y73.10351
G01 X45.90523 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.65293 Y73.10351 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.65293 Y73.10351
G01 X41.33028 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.70765 Y73.77052 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.70765 Y73.77052
G01 X38.72932 Y73.82287
G01 X38.73394 Y73.83150
G01 X38.78731 Y73.91138
G01 X38.79353 Y73.91895
G01 X38.82584 Y73.95459
G01 X40.44999 Y75.57872
G01 X40.52482 Y75.80320
G01 X40.52482 Y75.87384
G01 X40.47816 Y75.96716
G01 X40.45921 Y75.98608
G01 X40.36592 Y76.03274
G01 X39.90659 Y76.03274
G01 X39.81329 Y75.98608
G01 X39.73242 Y75.90521
G01 X39.69678 Y75.87290
G01 X39.68921 Y75.86670
G01 X39.60935 Y75.81331
G01 X39.60069 Y75.80869
G01 X39.51197 Y75.77193
G01 X39.50257 Y75.76909
G01 X39.40836 Y75.75034
G01 X39.39861 Y75.74938
G01 X39.30257 Y75.74935
G01 X39.29279 Y75.75032
G01 X39.19859 Y75.76906
G01 X39.18921 Y75.77191
G01 X39.10047 Y75.80866
G01 X39.09183 Y75.81326
G01 X39.01195 Y75.86663
G01 X39.00438 Y75.87285
G01 X38.93643 Y75.94077
G01 X38.93023 Y75.94834
G01 X38.87684 Y76.02819
G01 X38.87222 Y76.03686
G01 X38.83547 Y76.12558
G01 X38.83262 Y76.13498
G01 X38.81388 Y76.22918
G01 X38.81291 Y76.23894
G01 X38.81289 Y76.33498
G01 X38.81385 Y76.34475
G01 X38.83260 Y76.43896
G01 X38.83544 Y76.44834
G01 X38.87220 Y76.53708
G01 X38.87679 Y76.54572
G01 X38.93016 Y76.62560
G01 X38.93638 Y76.63317
G01 X38.96867 Y76.66881
G01 X39.11151 Y76.81168
G01 X39.14050 Y76.83843
G01 X39.14662 Y76.84364
G01 X39.21052 Y76.88969
G01 X39.21738 Y76.89385
G01 X39.25190 Y76.91288
G01 X39.51007 Y77.04196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.76239 Y77.04196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.76239 Y77.04196
G01 X41.02060 Y76.91288
G01 X41.05512 Y76.89385
G01 X41.06198 Y76.88969
G01 X41.12589 Y76.84364
G01 X41.13201 Y76.83843
G01 X41.16099 Y76.81168
G01 X41.30384 Y76.66881
G01 X41.33053 Y76.63985
G01 X41.33574 Y76.63373
G01 X41.36117 Y76.59848
G01 X41.38177 Y76.56988
G01 X41.38593 Y76.56299
G01 X41.40496 Y76.52850
G01 X41.54781 Y76.24280
G01 X41.57021 Y76.19065
G01 X41.57415 Y76.17978
G01 X41.60018 Y76.06947
G01 X41.60153 Y76.05799
G01 X41.60480 Y76.00130
G01 X41.60480 Y75.71557
G01 X41.60323 Y75.67623
G01 X41.60259 Y75.66820
G01 X41.58997 Y75.59048
G01 X41.58804 Y75.58268
G01 X41.57709 Y75.54483
G01 X41.43424 Y75.11626
G01 X41.41321 Y75.06353
G01 X41.40831 Y75.05306
G01 X41.34872 Y74.95664
G01 X41.34156 Y74.94758
G01 X41.30379 Y74.90516
G01 X40.51136 Y74.11273
G01 X41.06483 Y74.11273
G01 X41.11283 Y74.11037
G01 X41.12259 Y74.10943
G01 X41.21682 Y74.09068
G01 X41.22619 Y74.08784
G01 X41.31494 Y74.05108
G01 X41.32358 Y74.04646
G01 X41.40343 Y73.99310
G01 X41.41103 Y73.98687
G01 X41.47895 Y73.91895
G01 X41.48517 Y73.91136
G01 X41.53854 Y73.83150
G01 X41.54316 Y73.82287
G01 X41.57991 Y73.73412
G01 X41.58276 Y73.72474
G01 X41.60150 Y73.63051
G01 X41.60244 Y73.62076
G01 X41.60244 Y73.52472
G01 X41.60150 Y73.51497
G01 X41.58276 Y73.42073
G01 X41.57991 Y73.41136
G01 X41.54316 Y73.32261
G01 X41.53854 Y73.31398
G01 X41.48517 Y73.23412
G01 X41.47895 Y73.22652
G01 X41.41103 Y73.15860
G01 X41.40343 Y73.15238
G01 X41.33028 Y73.10351
G01 X41.32274 Y73.10120
G01 X41.31293 Y73.09876
G01 X41.21946 Y73.08009
G01 X41.20966 Y73.07865
G01 X41.11949 Y73.06973
G01 X41.10968 Y73.06925
G01 X41.06483 Y73.06813
G01 X39.20768 Y73.06813
G01 X39.16290 Y73.06922
G01 X39.15307 Y73.06970
G01 X39.06280 Y73.07865
G01 X39.05299 Y73.08009
G01 X38.95952 Y73.09876
G01 X38.94972 Y73.10120
G01 X38.94217 Y73.10351
G01 X38.47314 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.70765 Y73.37489 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.70765 Y73.37489
G01 X38.72932 Y73.32261
G01 X38.73394 Y73.31398
G01 X38.78731 Y73.23412
G01 X38.79353 Y73.22652
G01 X38.86145 Y73.15860
G01 X38.86905 Y73.15238
G01 X38.94217 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.24216 Y69.19882 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.24216 Y69.19882
G01 X43.24397 Y69.19514
G01 X43.24684 Y69.16600
G01 X43.24917 Y69.11797
G01 X43.24917 Y67.01798
G01 X43.24684 Y66.96995
G01 X43.24349 Y66.93596
G01 X43.24270 Y66.93421
G01 X43.23703 Y66.92171
G01 X43.20655 Y66.85628
G01 X43.19586 Y66.83538
G01 X43.17445 Y66.79062
G01 X43.15078 Y66.73754
G01 X43.13775 Y66.70960
G01 X43.12177 Y66.67680
G01 X43.11524 Y66.66606
G01 X43.06579 Y66.59298
G01 X43.04859 Y66.57005
G01 X43.03488 Y66.55493
G01 X42.97231 Y66.49235
G01 X42.95710 Y66.47856
G01 X42.93429 Y66.46144
G01 X42.86083 Y66.41175
G01 X42.85039 Y66.40540
G01 X42.81727 Y66.38928
G01 X42.73604 Y66.35453
G01 X42.73206 Y66.35306
G01 X42.72119 Y66.35013
G01 X42.68880 Y66.34142
G01 X42.60249 Y66.32270
G01 X42.60094 Y66.32245
G01 X42.58428 Y66.32103
G01 X42.56452 Y66.31937
G01 X42.55362 Y66.31884
G01 X42.50917 Y66.31772
G01 X41.00920 Y66.31772
G01 X40.96478 Y66.31884
G01 X40.95373 Y66.31937
G01 X40.93003 Y66.32136
G01 X40.91748 Y66.32242
G01 X40.91588 Y66.32270
G01 X40.82955 Y66.34142
G01 X40.78629 Y66.35306
G01 X40.78230 Y66.35453
G01 X40.70107 Y66.38928
G01 X40.66798 Y66.40540
G01 X40.65751 Y66.41175
G01 X40.58405 Y66.46146
G01 X40.56125 Y66.47856
G01 X40.54603 Y66.49237
G01 X40.48347 Y66.55493
G01 X40.46975 Y66.57007
G01 X40.45256 Y66.59298
G01 X40.40310 Y66.66606
G01 X40.39660 Y66.67678
G01 X40.38060 Y66.70960
G01 X40.34570 Y66.79118
G01 X40.34423 Y66.79514
G01 X40.33259 Y66.83842
G01 X40.31382 Y66.92491
G01 X40.31360 Y66.92626
G01 X40.31055 Y66.96263
G01 X40.31001 Y66.97378
G01 X40.30892 Y67.01798
G01 X40.30892 Y69.11800
G01 X40.31001 Y69.16219
G01 X40.31055 Y69.17334
G01 X40.31360 Y69.20974
G01 X40.31382 Y69.21106
G01 X40.33259 Y69.29755
G01 X40.34423 Y69.34083
G01 X40.34570 Y69.34482
G01 X40.38060 Y69.42640
G01 X40.39660 Y69.45917
G01 X40.40310 Y69.46991
G01 X40.45256 Y69.54302
G01 X40.46975 Y69.56590
G01 X40.48347 Y69.58104
G01 X40.54603 Y69.64360
G01 X40.56125 Y69.65742
G01 X40.58405 Y69.67451
G01 X40.65751 Y69.72422
G01 X40.66793 Y69.73057
G01 X40.70107 Y69.74670
G01 X40.78230 Y69.78142
G01 X40.78631 Y69.78294
G01 X40.82955 Y69.79455
G01 X40.91588 Y69.81327
G01 X40.91740 Y69.81355
G01 X40.95383 Y69.81660
G01 X40.96478 Y69.81716
G01 X41.00920 Y69.81822
G01 X42.50917 Y69.81822
G01 X42.55362 Y69.81716
G01 X42.56452 Y69.81660
G01 X42.60092 Y69.81355
G01 X42.60249 Y69.81327
G01 X42.68880 Y69.79455
G01 X42.73203 Y69.78294
G01 X42.73604 Y69.78142
G01 X42.81727 Y69.74670
G01 X42.85037 Y69.73057
G01 X42.86083 Y69.72422
G01 X42.89164 Y69.70466
G01 X42.93429 Y69.67456
G01 X42.95710 Y69.65742
G01 X42.97231 Y69.64365
G01 X43.03488 Y69.58104
G01 X43.04859 Y69.56593
G01 X43.06579 Y69.54302
G01 X43.11524 Y69.46991
G01 X43.12174 Y69.45920
G01 X43.13775 Y69.42640
G01 X43.15072 Y69.39857
G01 X43.17445 Y69.34535
G01 X43.18407 Y69.32442
G01 X43.19548 Y69.30052
G01 X43.20312 Y69.28406
G01 X43.23480 Y69.21404
G01 X43.24216 Y69.19885
G01 X43.24216 Y69.19882
G01 X43.25555 Y69.18330
G01 X43.34747 Y69.11658
G01 X43.40841 Y69.08239
G01 X43.49360 Y69.04472
G01 X43.58440 Y69.02381
G01 X43.67752 Y69.02049
G01 X43.74727 Y69.02465
G01 X43.83929 Y69.03905
G01 X43.92692 Y69.07055
G01 X43.95324 Y69.08620
G01 X43.99847 Y69.12961
G01 X44.01234 Y69.14558
G01 X44.04628 Y69.18256
G01 X44.07541 Y69.21271
G01 X44.13376 Y69.27929
G01 X44.16919 Y69.32389
G01 X44.20320 Y69.36146
G01 X44.26571 Y69.42399
G01 X44.30327 Y69.45800
G01 X44.41719 Y69.54843
G01 X44.45260 Y69.57515
G01 X44.49080 Y69.59760
G01 X44.61793 Y69.66826
G01 X44.66373 Y69.68990
G01 X44.74549 Y69.72379
G01 X44.79316 Y69.74083
G01 X44.93307 Y69.78079
G01 X44.97592 Y69.79189
G01 X45.01981 Y69.79803
G01 X45.16433 Y69.81467
G01 X45.21491 Y69.81716
G01 X45.30343 Y69.81716
G01 X45.35400 Y69.81467
G01 X45.49855 Y69.79803
G01 X45.54239 Y69.79189
G01 X45.58529 Y69.78079
G01 X45.59758 Y69.77725
G01 X45.72519 Y69.74083
G01 X45.77287 Y69.72379
G01 X45.85463 Y69.68990
G01 X45.90040 Y69.66826
G01 X46.02755 Y69.59760
G01 X46.06576 Y69.57515
G01 X46.10116 Y69.54843
G01 X46.21506 Y69.45800
G01 X46.25262 Y69.42394
G01 X46.31518 Y69.36141
G01 X46.34917 Y69.32389
G01 X46.43962 Y69.20997
G01 X46.46629 Y69.17456
G01 X46.48874 Y69.13641
G01 X46.51018 Y69.09783
G01 X46.55582 Y69.02425
G01 X46.58257 Y68.98533
G01 X46.59331 Y68.97002
G01 X46.64927 Y68.89206
G01 X46.65397 Y68.88630
G01 X46.75046 Y68.83352
G01 X46.81533 Y68.80753
G01 X46.90474 Y68.78130
G01 X46.99745 Y68.77246
G01 X47.09019 Y68.78132
G01 X47.15879 Y68.79455
G01 X47.24815 Y68.82084
G01 X47.33090 Y68.86346
G01 X47.36880 Y68.89328
G01 X47.39456 Y68.93103
G01 X47.42333 Y68.97096
G01 X47.43652 Y68.98831
G01 X47.50817 Y69.09783
G01 X47.52961 Y69.13641
G01 X47.55204 Y69.17456
G01 X47.57873 Y69.20997
G01 X47.66918 Y69.32389
G01 X47.70317 Y69.36141
G01 X47.76573 Y69.42399
G01 X47.80327 Y69.45800
G01 X47.91719 Y69.54843
G01 X47.95259 Y69.57515
G01 X47.99080 Y69.59760
G01 X48.11792 Y69.66826
G01 X48.16372 Y69.68990
G01 X48.24548 Y69.72379
G01 X48.29316 Y69.74083
G01 X48.43306 Y69.78079
G01 X48.47591 Y69.79189
G01 X48.51980 Y69.79803
G01 X48.66433 Y69.81467
G01 X48.71492 Y69.81716
G01 X48.80344 Y69.81716
G01 X48.85402 Y69.81467
G01 X48.99854 Y69.79803
G01 X49.04241 Y69.79189
G01 X49.08528 Y69.78079
G01 X49.09763 Y69.77725
G01 X49.22519 Y69.74083
G01 X49.27286 Y69.72379
G01 X49.35462 Y69.68990
G01 X49.40039 Y69.66826
G01 X49.52755 Y69.59760
G01 X49.56575 Y69.57515
G01 X49.60116 Y69.54843
G01 X49.71508 Y69.45800
G01 X49.75264 Y69.42399
G01 X49.81515 Y69.36146
G01 X49.84916 Y69.32392
G01 X49.92991 Y69.22219
G01 X49.93971 Y69.21005
G01 X49.96575 Y69.17837
G01 X49.98508 Y69.15407
G01 X49.99577 Y69.14010
G01 X50.08764 Y69.04139
G01 X50.12777 Y69.02033
G01 X50.19265 Y68.99435
G01 X50.28208 Y68.96806
G01 X50.37487 Y68.95920
G01 X50.46765 Y68.96806
G01 X50.53626 Y68.98129
G01 X50.62564 Y69.00758
G01 X50.70844 Y69.05028
G01 X50.78165 Y69.10789
G01 X50.83219 Y69.15607
G01 X50.89762 Y69.23923
G01 X50.89808 Y69.23888
G01 X51.04614 Y69.43181
G01 X51.19536 Y69.58107
G01 X51.31916 Y69.67609
G01 X51.31916 Y69.51784
G01 X51.24123 Y69.45386
G01 X51.17331 Y69.38594
G01 X51.04893 Y69.23443
G01 X50.99557 Y69.15455
G01 X50.90316 Y68.98168
G01 X50.86641 Y68.89290
G01 X50.80951 Y68.70530
G01 X50.79077 Y68.61112
G01 X50.77154 Y68.41599
G01 X50.76918 Y68.36799
G01 X50.76918 Y67.76799
G01 X50.77154 Y67.71996
G01 X50.79077 Y67.52486
G01 X50.80951 Y67.43065
G01 X50.86641 Y67.24305
G01 X50.90316 Y67.15430
G01 X50.99557 Y66.98143
G01 X51.04893 Y66.90154
G01 X51.17331 Y66.75001
G01 X51.24123 Y66.68209
G01 X51.31916 Y66.61813
G01 X51.31916 Y66.45991
G01 X51.19536 Y66.55491
G01 X51.04614 Y66.70416
G01 X50.91683 Y66.87266
G01 X50.88457 Y66.92125
G01 X50.86590 Y66.94589
G01 X50.79734 Y67.01932
G01 X50.71525 Y67.07723
G01 X50.65432 Y67.11145
G01 X50.56912 Y67.14912
G01 X50.52381 Y67.15953
G01 X50.47832 Y67.17000
G01 X50.38520 Y67.17332
G01 X50.31545 Y67.16916
G01 X50.22343 Y67.15478
G01 X50.13580 Y67.12326
G01 X50.08167 Y67.09113
G01 X50.06049 Y67.06916
G01 X50.01347 Y67.01508
G01 X49.99679 Y66.99535
G01 X49.93971 Y66.92593
G01 X49.92991 Y66.91379
G01 X49.84916 Y66.81206
G01 X49.81515 Y66.77452
G01 X49.75264 Y66.71201
G01 X49.71510 Y66.67800
G01 X49.60116 Y66.58755
G01 X49.56575 Y66.56085
G01 X49.52755 Y66.53837
G01 X49.40039 Y66.46771
G01 X49.35462 Y66.44607
G01 X49.27286 Y66.41219
G01 X49.22519 Y66.39514
G01 X49.08528 Y66.35519
G01 X49.04243 Y66.34409
G01 X48.99854 Y66.33794
G01 X48.85399 Y66.32131
G01 X48.80344 Y66.31882
G01 X48.71492 Y66.31882
G01 X48.66433 Y66.32131
G01 X48.51980 Y66.33794
G01 X48.47591 Y66.34409
G01 X48.43306 Y66.35519
G01 X48.29316 Y66.39514
G01 X48.24548 Y66.41219
G01 X48.16372 Y66.44607
G01 X48.11795 Y66.46771
G01 X47.99080 Y66.53837
G01 X47.95259 Y66.56085
G01 X47.91719 Y66.58755
G01 X47.80327 Y66.67797
G01 X47.76573 Y66.71201
G01 X47.70317 Y66.77457
G01 X47.66918 Y66.81208
G01 X47.57873 Y66.92603
G01 X47.55206 Y66.96139
G01 X47.52961 Y66.99956
G01 X47.51104 Y67.03296
G01 X47.51058 Y67.03380
G01 X47.50771 Y67.03893
G01 X47.46253 Y67.11173
G01 X47.43578 Y67.15064
G01 X47.42504 Y67.16596
G01 X47.36908 Y67.24391
G01 X47.36441 Y67.24965
G01 X47.36438 Y67.24965
G01 X47.36423 Y67.24988
G01 X47.26789 Y67.30248
G01 X47.20302 Y67.32844
G01 X47.11361 Y67.35468
G01 X47.02090 Y67.36352
G01 X46.92816 Y67.35465
G01 X46.85956 Y67.34142
G01 X46.77020 Y67.31516
G01 X46.68745 Y67.27251
G01 X46.64955 Y67.24269
G01 X46.62379 Y67.20495
G01 X46.59502 Y67.16504
G01 X46.58183 Y67.14769
G01 X46.51018 Y67.03814
G01 X46.48874 Y66.99956
G01 X46.46629 Y66.96141
G01 X46.43962 Y66.92603
G01 X46.34917 Y66.81208
G01 X46.31518 Y66.77457
G01 X46.25262 Y66.71203
G01 X46.21508 Y66.67800
G01 X46.10116 Y66.58757
G01 X46.06576 Y66.56085
G01 X46.02755 Y66.53837
G01 X45.90040 Y66.46771
G01 X45.85463 Y66.44607
G01 X45.77287 Y66.41219
G01 X45.72519 Y66.39514
G01 X45.58529 Y66.35519
G01 X45.54244 Y66.34409
G01 X45.49855 Y66.33794
G01 X45.35400 Y66.32131
G01 X45.30343 Y66.31882
G01 X45.21491 Y66.31882
G01 X45.16433 Y66.32131
G01 X45.01981 Y66.33794
G01 X44.97592 Y66.34409
G01 X44.93307 Y66.35519
G01 X44.79314 Y66.39514
G01 X44.74549 Y66.41219
G01 X44.68836 Y66.43484
G01 X44.66373 Y66.44607
G01 X44.61798 Y66.46771
G01 X44.49080 Y66.53837
G01 X44.45260 Y66.56085
G01 X44.41719 Y66.58755
G01 X44.30327 Y66.67797
G01 X44.26573 Y66.71201
G01 X44.20322 Y66.77454
G01 X44.16916 Y66.81211
G01 X44.13370 Y66.85676
G01 X44.08062 Y66.91782
G01 X44.07544 Y66.92329
G01 X44.05065 Y66.95041
G01 X44.01453 Y66.99159
G01 X43.96487 Y67.03888
G01 X43.90317 Y67.15430
G01 X43.86639 Y67.24305
G01 X43.80950 Y67.43065
G01 X43.79591 Y67.49900
G01 X43.79075 Y67.52486
G01 X43.77155 Y67.71996
G01 X43.76919 Y67.76799
G01 X43.76919 Y68.36799
G01 X43.77155 Y68.41599
G01 X43.79075 Y68.61112
G01 X43.80950 Y68.70530
G01 X43.86639 Y68.89290
G01 X43.90317 Y68.98168
G01 X43.96515 Y69.09758
G01 X43.99847 Y69.12961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.01453 Y66.99159 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.01453 Y66.99159
G01 X43.95319 Y67.05001
G01 X43.87381 Y67.08254
G01 X43.80653 Y67.10136
G01 X43.71491 Y67.11780
G01 X43.62182 Y67.11663
G01 X43.53063 Y67.09786
G01 X43.46383 Y67.07734
G01 X43.37775 Y67.04162
G01 X43.29997 Y66.99024
G01 X43.24270 Y66.93421
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.83998 Y61.73003 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.83998 Y61.73003
G01 X42.84260 Y61.77430
G01 X42.85763 Y61.95466
G01 X42.86584 Y62.00839
G01 X42.88349 Y62.09513
G01 X42.90386 Y62.17503
G01 X42.95169 Y62.32027
G01 X42.97706 Y62.38812
G01 X42.98448 Y62.40249
G01 X43.08192 Y62.58763
G01 X43.09561 Y62.60983
G01 X43.14577 Y62.68286
G01 X43.21280 Y62.77089
G01 X43.29500 Y62.86472
G01 X43.35654 Y62.92840
G01 X43.36530 Y62.93663
G01 X43.53818 Y63.07788
G01 X43.53980 Y63.07920
G01 X43.61280 Y63.12566
G01 X43.73338 Y63.19446
G01 X43.82032 Y63.23650
G01 X43.90178 Y63.27104
G01 X43.93957 Y63.28494
G01 X43.97851 Y63.29629
G01 X44.12682 Y63.33957
G01 X44.15603 Y63.34757
G01 X44.21382 Y63.35629
G01 X44.37960 Y63.37582
G01 X44.44793 Y63.37920
G01 X44.53645 Y63.37920
G01 X44.60475 Y63.37585
G01 X44.77053 Y63.35629
G01 X44.82832 Y63.34757
G01 X44.85753 Y63.33957
G01 X44.94551 Y63.31389
G01 X45.04480 Y63.28494
G01 X45.08257 Y63.27104
G01 X45.16403 Y63.23650
G01 X45.25097 Y63.19446
G01 X45.37155 Y63.12566
G01 X45.44452 Y63.07922
G01 X45.61907 Y62.93660
G01 X45.62781 Y62.92840
G01 X45.68935 Y62.86472
G01 X45.69108 Y62.86277
G01 X45.77155 Y62.77089
G01 X45.83858 Y62.68286
G01 X45.88874 Y62.60983
G01 X45.90243 Y62.58763
G01 X45.99987 Y62.40249
G01 X46.00728 Y62.38812
G01 X46.03268 Y62.32027
G01 X46.08049 Y62.17506
G01 X46.10086 Y62.09513
G01 X46.11851 Y62.00839
G01 X46.12672 Y61.95466
G01 X46.14175 Y61.77430
G01 X46.14437 Y61.73010
G01 X46.14328 Y61.70689
G01 X46.14175 Y61.68573
G01 X46.12672 Y61.50536
G01 X46.11851 Y61.45164
G01 X46.10086 Y61.36493
G01 X46.08049 Y61.28502
G01 X46.03266 Y61.13978
G01 X46.00728 Y61.07194
G01 X45.99987 Y61.05756
G01 X45.90243 Y60.87242
G01 X45.88874 Y60.85022
G01 X45.83858 Y60.77720
G01 X45.77155 Y60.68916
G01 X45.68935 Y60.59533
G01 X45.62783 Y60.53168
G01 X45.61905 Y60.52343
G01 X45.44455 Y60.38083
G01 X45.37150 Y60.33437
G01 X45.25097 Y60.26559
G01 X45.16400 Y60.22355
G01 X45.14280 Y60.21362
G01 X45.08257 Y60.18901
G01 X45.04478 Y60.17511
G01 X44.85753 Y60.12048
G01 X44.82832 Y60.11248
G01 X44.77053 Y60.10377
G01 X44.60475 Y60.08421
G01 X44.53645 Y60.08086
G01 X44.44793 Y60.08086
G01 X44.37955 Y60.08423
G01 X44.37594 Y60.08464
G01 X44.21382 Y60.10377
G01 X44.15603 Y60.11248
G01 X44.12682 Y60.12048
G01 X43.93957 Y60.17511
G01 X43.90178 Y60.18901
G01 X43.89017 Y60.19335
G01 X43.82034 Y60.22355
G01 X43.73350 Y60.26551
G01 X43.61285 Y60.33437
G01 X43.53980 Y60.38085
G01 X43.53815 Y60.38218
G01 X43.36533 Y60.52340
G01 X43.35652 Y60.53168
G01 X43.29500 Y60.59533
G01 X43.27445 Y60.61880
G01 X43.21280 Y60.68919
G01 X43.14577 Y60.77720
G01 X43.09561 Y60.85022
G01 X43.08192 Y60.87242
G01 X42.98448 Y61.05756
G01 X42.97706 Y61.07194
G01 X42.95169 Y61.13978
G01 X42.90386 Y61.28502
G01 X42.88349 Y61.36493
G01 X42.86584 Y61.45164
G01 X42.85763 Y61.50539
G01 X42.84260 Y61.68573
G01 X42.83998 Y61.73003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.93382 Y51.36932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.93382 Y51.36932
G01 X50.90374 Y51.38537
G01 X50.82269 Y51.43391
G01 X50.75373 Y51.47998
G01 X50.69023 Y51.51882
G01 X50.67654 Y51.52644
G01 X50.61307 Y51.56525
G01 X50.48203 Y51.65281
G01 X50.46979 Y51.66111
G01 X50.46110 Y51.67368
G01 X50.42648 Y51.72756
G01 X50.42290 Y51.73355
G01 X50.34837 Y51.84051
G01 X50.33583 Y51.85603
G01 X50.31579 Y51.88176
G01 X50.28703 Y51.92989
G01 X50.22341 Y52.04440
G01 X50.21256 Y52.06789
G01 X50.17946 Y52.14996
G01 X50.15559 Y52.21869
G01 X50.13400 Y52.30005
G01 X50.11553 Y52.38656
G01 X50.11325 Y52.40058
G01 X50.10093 Y52.54272
G01 X50.09816 Y52.58702
G01 X50.10093 Y52.63134
G01 X50.11325 Y52.77345
G01 X50.11553 Y52.78747
G01 X50.13400 Y52.87396
G01 X50.15564 Y52.95547
G01 X50.17946 Y53.02408
G01 X50.21256 Y53.10614
G01 X50.22341 Y53.12966
G01 X50.28703 Y53.24417
G01 X50.31576 Y53.29227
G01 X50.33583 Y53.31803
G01 X50.43296 Y53.43807
G01 X50.43461 Y53.43982
G01 X50.49841 Y53.50129
G01 X50.57075 Y53.56443
G01 X50.61952 Y53.60096
G01 X50.69287 Y53.65046
G01 X50.72498 Y53.66992
G01 X50.83141 Y53.72395
G01 X50.89285 Y53.75229
G01 X50.91276 Y53.75864
G01 X51.06275 Y53.80454
G01 X51.07166 Y53.80721
G01 X51.14629 Y53.82001
G01 X51.14992 Y53.82047
G01 X51.26564 Y53.83489
G01 X51.27911 Y53.83616
G01 X51.30547 Y53.83888
G01 X51.39559 Y53.84815
G01 X51.45048 Y53.85542
G01 X51.48236 Y53.87828
G01 X51.53885 Y53.92059
G01 X51.63689 Y54.00548
G01 X53.99985 Y56.36844
G01 X54.02170 Y56.39105
G01 X54.03348 Y56.40370
G01 X54.13434 Y56.53347
G01 X54.14555 Y56.55084
G01 X54.15220 Y56.60139
G01 X54.15276 Y56.60553
G01 X54.16419 Y56.69542
G01 X54.16805 Y56.73146
G01 X54.17725 Y56.83745
G01 X54.17953 Y56.85147
G01 X54.19800 Y56.93796
G01 X54.21964 Y57.01947
G01 X54.24346 Y57.08808
G01 X54.27656 Y57.17014
G01 X54.28741 Y57.19366
G01 X54.35103 Y57.30817
G01 X54.37976 Y57.35627
G01 X54.39983 Y57.38203
G01 X54.49696 Y57.50207
G01 X54.49861 Y57.50382
G01 X54.56241 Y57.56529
G01 X54.63472 Y57.62841
G01 X54.68352 Y57.66496
G01 X54.75687 Y57.71446
G01 X54.78903 Y57.73395
G01 X54.89541 Y57.78795
G01 X54.95685 Y57.81629
G01 X54.97676 Y57.82264
G01 X55.12675 Y57.86854
G01 X55.13566 Y57.87121
G01 X55.19693 Y57.88218
G01 X55.21392 Y57.88447
G01 X55.32075 Y57.89778
G01 X55.36995 Y57.90019
G01 X55.45842 Y57.90019
G01 X55.50757 Y57.89778
G01 X55.60508 Y57.88564
G01 X55.61443 Y57.88447
G01 X55.69269 Y57.87121
G01 X55.70160 Y57.86854
G01 X55.85159 Y57.82264
G01 X55.87150 Y57.81629
G01 X55.93294 Y57.78795
G01 X56.03937 Y57.73392
G01 X56.07148 Y57.71446
G01 X56.14483 Y57.66496
G01 X56.19362 Y57.62841
G01 X56.26594 Y57.56529
G01 X56.32974 Y57.50382
G01 X56.33139 Y57.50207
G01 X56.42852 Y57.38203
G01 X56.44859 Y57.35627
G01 X56.47732 Y57.30817
G01 X56.54094 Y57.19364
G01 X56.55179 Y57.17017
G01 X56.58489 Y57.08808
G01 X56.60871 Y57.01950
G01 X56.63035 Y56.93796
G01 X56.64795 Y56.85663
G01 X56.64882 Y56.85147
G01 X56.65110 Y56.83748
G01 X56.66342 Y56.69534
G01 X56.66619 Y56.65102
G01 X56.66342 Y56.60672
G01 X56.65110 Y56.46461
G01 X56.64882 Y56.45056
G01 X56.63035 Y56.36405
G01 X56.60871 Y56.28256
G01 X56.58489 Y56.21396
G01 X56.55179 Y56.13189
G01 X56.54094 Y56.10840
G01 X56.47732 Y55.99389
G01 X56.44856 Y55.94576
G01 X56.42852 Y55.92003
G01 X56.33139 Y55.79997
G01 X56.32974 Y55.79821
G01 X56.26594 Y55.73674
G01 X56.19362 Y55.67363
G01 X56.14483 Y55.63710
G01 X56.07153 Y55.58762
G01 X56.03932 Y55.56811
G01 X55.93300 Y55.51411
G01 X55.87150 Y55.48574
G01 X55.85151 Y55.47937
G01 X55.70152 Y55.43349
G01 X55.69269 Y55.43085
G01 X55.61443 Y55.41759
G01 X55.49873 Y55.40317
G01 X55.48481 Y55.40185
G01 X55.45845 Y55.39913
G01 X55.36878 Y55.38991
G01 X55.31387 Y55.38264
G01 X55.28209 Y55.35986
G01 X55.22561 Y55.31757
G01 X55.12746 Y55.23258
G01 X52.76447 Y52.86959
G01 X52.74293 Y52.84732
G01 X52.73115 Y52.83469
G01 X52.62995 Y52.70454
G01 X52.61880 Y52.68727
G01 X52.61212 Y52.63657
G01 X52.61161 Y52.63253
G01 X52.60016 Y52.54264
G01 X52.59622 Y52.50586
G01 X52.59569 Y52.49967
G01 X52.58710 Y52.40063
G01 X52.58482 Y52.38656
G01 X52.56635 Y52.30005
G01 X52.54471 Y52.21856
G01 X52.52089 Y52.14996
G01 X52.48779 Y52.06789
G01 X52.47694 Y52.04440
G01 X52.41332 Y51.92989
G01 X52.38456 Y51.88176
G01 X52.36452 Y51.85603
G01 X52.26739 Y51.73596
G01 X52.26574 Y51.73421
G01 X52.20194 Y51.67274
G01 X52.12962 Y51.60963
G01 X52.08083 Y51.57310
G01 X52.00753 Y51.52362
G01 X51.97540 Y51.50416
G01 X51.89983 Y51.46579
G01 X51.86930 Y51.44955
G01 X51.81964 Y51.42189
G01 X51.79028 Y51.40622
G01 X51.77517 Y51.39850
G01 X51.68802 Y51.34547
G01 X51.68799 Y51.34544
G01 X51.67862 Y51.33975
G01 X51.67451 Y51.33574
G01 X51.61174 Y51.23465
G01 X51.58238 Y51.17125
G01 X51.55147 Y51.08344
G01 X51.53770 Y50.99136
G01 X51.54161 Y50.89835
G01 X51.55116 Y50.82913
G01 X51.57880 Y50.73302
G01 X51.43085 Y50.73302
G01 X51.33468 Y50.91290
G01 X51.28132 Y50.99279
G01 X51.08233 Y51.23523
G01 X51.01441 Y51.30315
G01 X50.93382 Y51.36932
G01 X51.05188 Y51.33348
G01 X51.14609 Y51.31473
G01 X51.30217 Y51.29936
G01 X51.39821 Y51.29936
G01 X51.55429 Y51.31473
G01 X51.64850 Y51.33348
G01 X51.68799 Y51.34544
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.51218 Y47.79256 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.51218 Y47.79256
G01 X50.51218 Y47.93435
G01 X50.69209 Y48.03051
G01 X50.77194 Y48.08388
G01 X51.01441 Y48.28286
G01 X51.08233 Y48.35078
G01 X51.28132 Y48.59325
G01 X51.33468 Y48.67311
G01 X51.43085 Y48.85301
G01 X51.57263 Y48.85301
G01 X51.53262 Y48.76411
G01 X51.39429 Y48.53529
G01 X51.22935 Y48.32477
G01 X51.04037 Y48.13579
G01 X50.82991 Y47.97092
G01 X50.60108 Y47.83257
G01 X50.51218 Y47.79256
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.80783 Y48.20364 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.80783 Y48.20364
G01 X54.95771 Y48.18304
G01 X55.17798 Y48.18304
G01 X55.32789 Y48.20364
G01 X55.21626 Y48.31527
G01 X55.11590 Y48.30536
G01 X55.01984 Y48.30536
G01 X54.91946 Y48.31527
G01 X54.80783 Y48.20364
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.45408 Y49.79302 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.45408 Y49.79302
G01 X53.46912 Y50.01278
G01 X53.47765 Y50.05385
G01 X53.59010 Y49.94140
G01 X53.58022 Y49.84105
G01 X53.58022 Y49.74499
G01 X53.59010 Y49.64463
G01 X53.47765 Y49.53218
G01 X53.46912 Y49.57328
G01 X53.45408 Y49.79302
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.80783 Y51.38242 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.80783 Y51.38242
G01 X54.95771 Y51.40302
G01 X55.17798 Y51.40302
G01 X55.32789 Y51.38242
G01 X55.21623 Y51.27076
G01 X55.11590 Y51.28064
G01 X55.01984 Y51.28064
G01 X54.91948 Y51.27076
G01 X54.80783 Y51.38242
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.54562 Y49.64463 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.54562 Y49.64463
G01 X56.65804 Y49.53218
G01 X56.66657 Y49.57328
G01 X56.68161 Y49.79302
G01 X56.66657 Y50.01278
G01 X56.65804 Y50.05385
G01 X56.54562 Y49.94143
G01 X56.55550 Y49.84105
G01 X56.55550 Y49.74499
G01 X56.54562 Y49.64463
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.61760 Y48.79304 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.61760 Y48.79304
G01 X58.61760 Y50.79302
G01 X58.61874 Y50.83828
G01 X58.62070 Y50.85779
G01 X58.64635 Y50.95484
G01 X58.68920 Y51.03894
G01 X58.74861 Y51.11227
G01 X58.82194 Y51.17168
G01 X58.90604 Y51.21453
G01 X59.00309 Y51.24018
G01 X59.02260 Y51.24214
G01 X59.06784 Y51.24328
G01 X61.06786 Y51.24328
G01 X61.11307 Y51.24214
G01 X61.13263 Y51.24018
G01 X61.18770 Y51.22703
G01 X61.22968 Y51.21450
G01 X61.31376 Y51.17168
G01 X61.33839 Y51.15311
G01 X61.38709 Y51.11227
G01 X61.44370 Y51.04275
G01 X61.44650 Y51.03894
G01 X61.45462 Y51.02454
G01 X61.48935 Y50.95481
G01 X61.51500 Y50.85781
G01 X61.51696 Y50.83828
G01 X61.51810 Y50.79302
G01 X61.51810 Y48.79304
G01 X61.51696 Y48.74778
G01 X61.51500 Y48.72822
G01 X61.48935 Y48.63122
G01 X61.44650 Y48.54715
G01 X61.38711 Y48.47379
G01 X61.31371 Y48.41436
G01 X61.22966 Y48.37153
G01 X61.13265 Y48.34588
G01 X61.11310 Y48.34392
G01 X61.06786 Y48.34278
G01 X59.06784 Y48.34278
G01 X59.02260 Y48.34392
G01 X59.00304 Y48.34588
G01 X58.90604 Y48.37153
G01 X58.86268 Y48.39223
G01 X58.82197 Y48.41438
G01 X58.81813 Y48.41718
G01 X58.74861 Y48.47379
G01 X58.68923 Y48.54710
G01 X58.64635 Y48.63125
G01 X58.63970 Y48.65263
G01 X58.62070 Y48.72822
G01 X58.61874 Y48.74778
G01 X58.61760 Y48.79304
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.96796 Y44.01843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.96796 Y44.01843
G01 X63.01972 Y43.98256
G01 X63.10070 Y43.93707
G01 X63.18884 Y43.90769
G01 X63.28091 Y43.89544
G01 X63.35073 Y43.89285
G01 X63.44370 Y43.89826
G01 X63.53397 Y43.92117
G01 X63.56994 Y43.93804
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.52914 Y42.11124 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.52914 Y42.11124
G01 X63.52744 Y42.11295
G01 X63.52579 Y42.11424
G01 X63.41860 Y42.31480
G01 X63.38185 Y42.40352
G01 X63.31528 Y42.62303
G01 X63.29653 Y42.71724
G01 X63.27405 Y42.94548
G01 X63.27405 Y43.04154
G01 X63.29653 Y43.26979
G01 X63.31528 Y43.36400
G01 X63.38185 Y43.58348
G01 X63.41860 Y43.67223
G01 X63.52673 Y43.87451
G01 X63.56829 Y43.93672
G01 X63.58520 Y43.95023
G01 X63.61159 Y43.97205
G01 X63.66547 Y44.01823
G01 X63.75569 Y44.10700
G01 X63.75858 Y44.11028
G01 X63.81723 Y44.17065
G01 X63.82528 Y44.17819
G01 X63.99437 Y44.31637
G01 X63.99663 Y44.31823
G01 X64.06900 Y44.36420
G01 X64.18665 Y44.43136
G01 X64.27131 Y44.47228
G01 X64.35279 Y44.50687
G01 X64.38909 Y44.52021
G01 X64.57222 Y44.57362
G01 X64.60163 Y44.58165
G01 X64.65916 Y44.59034
G01 X64.82114 Y44.60944
G01 X64.88743 Y44.61269
G01 X64.97590 Y44.61269
G01 X65.04217 Y44.60944
G01 X65.15195 Y44.59648
G01 X65.20417 Y44.59034
G01 X65.26173 Y44.58165
G01 X65.29114 Y44.57362
G01 X65.47425 Y44.52021
G01 X65.51057 Y44.50685
G01 X65.59208 Y44.47228
G01 X65.67669 Y44.43136
G01 X65.79437 Y44.36420
G01 X65.86666 Y44.31825
G01 X65.86894 Y44.31640
G01 X65.88136 Y44.30624
G01 X66.03811 Y44.17819
G01 X66.04611 Y44.17068
G01 X66.10768 Y44.10697
G01 X66.18781 Y44.01546
G01 X66.25317 Y43.92966
G01 X66.30326 Y43.85671
G01 X66.31631 Y43.83557
G01 X66.41159 Y43.65457
G01 X66.41923 Y43.63966
G01 X66.44445 Y43.57225
G01 X66.49117 Y43.43034
G01 X66.51095 Y43.35272
G01 X66.52858 Y43.26603
G01 X66.53650 Y43.21414
G01 X66.55121 Y43.03781
G01 X66.55380 Y42.99354
G01 X66.55121 Y42.94924
G01 X66.53650 Y42.77291
G01 X66.52858 Y42.72102
G01 X66.51095 Y42.63433
G01 X66.49111 Y42.55658
G01 X66.44445 Y42.41480
G01 X66.41923 Y42.34739
G01 X66.41159 Y42.33248
G01 X66.31631 Y42.15150
G01 X66.30326 Y42.13035
G01 X66.25317 Y42.05740
G01 X66.18781 Y41.97160
G01 X66.10768 Y41.88008
G01 X66.04611 Y41.81638
G01 X66.03808 Y41.80886
G01 X65.86673 Y41.66885
G01 X65.79437 Y41.62285
G01 X65.67669 Y41.55567
G01 X65.67402 Y41.55440
G01 X65.59208 Y41.51478
G01 X65.51057 Y41.48021
G01 X65.47425 Y41.46685
G01 X65.29114 Y41.41343
G01 X65.26170 Y41.40540
G01 X65.20417 Y41.39672
G01 X65.04215 Y41.37762
G01 X64.97590 Y41.37437
G01 X64.88743 Y41.37437
G01 X64.82122 Y41.37762
G01 X64.81802 Y41.37800
G01 X64.65916 Y41.39672
G01 X64.60166 Y41.40540
G01 X64.57222 Y41.41343
G01 X64.38909 Y41.46687
G01 X64.35279 Y41.48018
G01 X64.27131 Y41.51478
G01 X64.18665 Y41.55570
G01 X64.06900 Y41.62285
G01 X63.99663 Y41.66883
G01 X63.99437 Y41.67068
G01 X63.87913 Y41.76484
G01 X63.82533 Y41.80881
G01 X63.81723 Y41.81640
G01 X63.75602 Y41.87970
G01 X63.75571 Y41.88005
G01 X63.68955 Y41.95562
G01 X63.59745 Y42.04688
G01 X63.59640 Y42.04780
G01 X63.54436 Y42.09606
G01 X63.52914 Y42.11124
G01 X63.46410 Y42.14195
G01 X63.37415 Y42.16504
G01 X63.28147 Y42.17073
G01 X63.21162 Y42.16839
G01 X63.11929 Y42.15646
G01 X63.03085 Y42.12725
G01 X62.95592 Y42.08541
G01 X62.95289 Y42.08132
G01 X62.96778 Y42.13037
G01 X62.97718 Y42.22598
G01 X62.97718 Y43.92597
G01 X62.96811 Y44.01823
G01 X62.96796 Y44.01843
G01 X62.96793 Y44.01848
G01 X62.96430 Y44.02445
G01 X62.88884 Y44.13867
G01 X62.82264 Y44.22673
G01 X62.80644 Y44.24523
G01 X62.73308 Y44.30464
G01 X62.64901 Y44.34746
G01 X62.55196 Y44.37314
G01 X62.53240 Y44.37510
G01 X62.48719 Y44.37624
G01 X60.78719 Y44.37624
G01 X60.74190 Y44.37510
G01 X60.72239 Y44.37314
G01 X60.62539 Y44.34749
G01 X60.54127 Y44.30464
G01 X60.46794 Y44.24523
G01 X60.40853 Y44.17190
G01 X60.36568 Y44.08777
G01 X60.34002 Y43.99077
G01 X60.33807 Y43.97124
G01 X60.33692 Y43.92597
G01 X60.33692 Y42.22598
G01 X60.33807 Y42.18074
G01 X60.34002 Y42.16118
G01 X60.35506 Y42.09926
G01 X60.36568 Y42.06418
G01 X60.40850 Y41.98013
G01 X60.46791 Y41.90675
G01 X60.50055 Y41.87876
G01 X60.54129 Y41.84734
G01 X60.58193 Y41.82524
G01 X60.62539 Y41.80449
G01 X60.72239 Y41.77883
G01 X60.74193 Y41.77688
G01 X60.78719 Y41.77574
G01 X62.48719 Y41.77574
G01 X62.53242 Y41.77688
G01 X62.55196 Y41.77883
G01 X62.64896 Y41.80449
G01 X62.73308 Y41.84734
G01 X62.80641 Y41.90672
G01 X62.82031 Y41.92252
G01 X62.90588 Y42.02214
G01 X62.95135 Y42.07924
G01 X62.95289 Y42.08132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.25839 Y39.94668 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.25839 Y39.94668
G01 X59.25839 Y39.96451
G01 X59.26299 Y39.98171
G01 X59.27190 Y39.99715
G01 X59.28453 Y40.00978
G01 X59.29997 Y40.01869
G01 X59.33281 Y40.02748
G01 X59.34208 Y40.02809
G01 X61.88150 Y40.02809
G01 X61.89077 Y40.02748
G01 X61.92364 Y40.01869
G01 X61.93905 Y40.00978
G01 X61.95168 Y39.99715
G01 X61.96059 Y39.98171
G01 X61.96519 Y39.96451
G01 X61.96519 Y39.94668
G01 X61.96059 Y39.92949
G01 X61.95168 Y39.91404
G01 X61.93908 Y39.90144
G01 X61.92364 Y39.89253
G01 X61.89072 Y39.88372
G01 X61.88150 Y39.88311
G01 X61.17431 Y39.88311
G01 X61.07870 Y39.87368
G01 X60.98678 Y39.84579
G01 X60.90207 Y39.80053
G01 X60.82780 Y39.73960
G01 X60.76687 Y39.66533
G01 X60.72161 Y39.58062
G01 X60.69372 Y39.48869
G01 X60.68429 Y39.39309
G01 X60.68429 Y35.47168
G01 X60.68368 Y35.46244
G01 X60.67487 Y35.42950
G01 X60.66595 Y35.41405
G01 X60.65333 Y35.40143
G01 X60.63791 Y35.39251
G01 X60.62072 Y35.38792
G01 X60.60286 Y35.38792
G01 X60.58567 Y35.39251
G01 X60.57025 Y35.40143
G01 X60.55762 Y35.41405
G01 X60.54871 Y35.42950
G01 X60.53989 Y35.46244
G01 X60.53929 Y35.47168
G01 X60.53929 Y39.39309
G01 X60.52986 Y39.48869
G01 X60.50197 Y39.58062
G01 X60.45671 Y39.66533
G01 X60.39578 Y39.73960
G01 X60.32151 Y39.80053
G01 X60.23680 Y39.84579
G01 X60.14487 Y39.87368
G01 X60.04929 Y39.88311
G01 X59.34208 Y39.88311
G01 X59.33286 Y39.88372
G01 X59.29997 Y39.89253
G01 X59.28450 Y39.90144
G01 X59.27190 Y39.91404
G01 X59.26299 Y39.92949
G01 X59.25839 Y39.94668
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.20194 Y39.39502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.20194 Y39.39502
G01 X53.20194 Y41.39502
G01 X53.20305 Y41.44035
G01 X53.20504 Y41.45986
G01 X53.23066 Y41.55684
G01 X53.27351 Y41.64094
G01 X53.33292 Y41.71427
G01 X53.40625 Y41.77368
G01 X53.49035 Y41.81653
G01 X53.58741 Y41.84218
G01 X53.60691 Y41.84414
G01 X53.65215 Y41.84528
G01 X55.65220 Y41.84528
G01 X55.69738 Y41.84414
G01 X55.71694 Y41.84218
G01 X55.77201 Y41.82903
G01 X55.81402 Y41.81650
G01 X55.81514 Y41.81602
G01 X55.89804 Y41.77370
G01 X55.97143 Y41.71429
G01 X56.02802 Y41.64477
G01 X56.03084 Y41.64091
G01 X56.04130 Y41.62227
G01 X56.07369 Y41.55681
G01 X56.09931 Y41.45986
G01 X56.10130 Y41.44035
G01 X56.10244 Y41.39502
G01 X56.10244 Y39.39502
G01 X56.10130 Y39.34971
G01 X56.09931 Y39.33017
G01 X56.07369 Y39.23325
G01 X56.04636 Y39.17716
G01 X56.03079 Y39.14907
G01 X55.97145 Y39.07579
G01 X55.89807 Y39.01638
G01 X55.81397 Y38.97353
G01 X55.71697 Y38.94788
G01 X55.69744 Y38.94592
G01 X55.65220 Y38.94478
G01 X53.65215 Y38.94478
G01 X53.60691 Y38.94592
G01 X53.58738 Y38.94788
G01 X53.49035 Y38.97353
G01 X53.44207 Y38.99677
G01 X53.40628 Y39.01638
G01 X53.34504 Y39.06505
G01 X53.33292 Y39.07577
G01 X53.27354 Y39.14912
G01 X53.23066 Y39.23325
G01 X53.21606 Y39.28301
G01 X53.20504 Y39.33020
G01 X53.20305 Y39.34971
G01 X53.20194 Y39.39502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.12993 Y40.24663 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.12993 Y40.24663
G01 X51.13984 Y40.34699
G01 X51.13984 Y40.44305
G01 X51.12993 Y40.54343
G01 X51.24238 Y40.65588
G01 X51.25091 Y40.61478
G01 X51.26592 Y40.39502
G01 X51.25091 Y40.17528
G01 X51.24238 Y40.13418
G01 X51.12993 Y40.24663
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.39214 Y38.80564 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.39214 Y38.80564
G01 X49.50377 Y38.91727
G01 X49.60415 Y38.90736
G01 X49.70022 Y38.90736
G01 X49.80057 Y38.91725
G01 X49.91220 Y38.80564
G01 X49.76229 Y38.78504
G01 X49.54205 Y38.78504
G01 X49.39214 Y38.80564
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.03842 Y40.39502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.03842 Y40.39502
G01 X48.05346 Y40.17528
G01 X48.06199 Y40.13421
G01 X48.17444 Y40.24666
G01 X48.16456 Y40.34699
G01 X48.16456 Y40.44305
G01 X48.17444 Y40.54340
G01 X48.06199 Y40.65585
G01 X48.05346 Y40.61478
G01 X48.03842 Y40.39502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.39214 Y41.98442 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.39214 Y41.98442
G01 X49.50380 Y41.87276
G01 X49.60415 Y41.88264
G01 X49.70022 Y41.88264
G01 X49.80055 Y41.87276
G01 X49.91220 Y41.98442
G01 X49.76229 Y42.00502
G01 X49.54205 Y42.00502
G01 X49.39214 Y41.98442
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X45.53017 Y39.33114 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X45.53017 Y39.33114
G01 X45.53017 Y39.49258
G01 X45.58153 Y39.45413
G01 X45.73426 Y39.30139
G01 X45.77272 Y39.25004
G01 X45.61130 Y39.25004
G01 X45.60536 Y39.25725
G01 X45.53744 Y39.32519
G01 X45.53017 Y39.33114
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.40762 Y39.25004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.40762 Y39.25004
G01 X43.44608 Y39.30139
G01 X43.59881 Y39.45413
G01 X43.65016 Y39.49258
G01 X43.65016 Y39.33111
G01 X43.64295 Y39.32519
G01 X43.57501 Y39.25725
G01 X43.56909 Y39.25004
G01 X43.40762 Y39.25004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.13018 Y39.33114 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.13018 Y39.33114
G01 X42.13018 Y39.49258
G01 X42.18154 Y39.45413
G01 X42.33427 Y39.30139
G01 X42.37272 Y39.25004
G01 X42.21128 Y39.25004
G01 X42.20536 Y39.25725
G01 X42.13744 Y39.32519
G01 X42.13018 Y39.33114
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.80671 Y38.40066 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.80671 Y38.40066
G01 X39.81984 Y38.53363
G01 X39.83859 Y38.62784
G01 X39.88980 Y38.79667
G01 X39.92030 Y38.87036
G01 X39.92655 Y38.88542
G01 X40.00974 Y39.04102
G01 X40.06310 Y39.12088
G01 X40.17501 Y39.25725
G01 X40.24293 Y39.32519
G01 X40.25017 Y39.33111
G01 X40.25017 Y39.49258
G01 X40.19881 Y39.45413
G01 X40.01979 Y39.27508
G01 X39.90811 Y39.19149
G01 X39.84679 Y39.15801
G01 X39.76117 Y39.12136
G01 X39.67019 Y39.10157
G01 X39.57707 Y39.09934
G01 X39.50737 Y39.10432
G01 X39.41548 Y39.11976
G01 X39.32815 Y39.15235
G01 X39.24857 Y39.20086
G01 X39.19264 Y39.24275
G01 X39.17631 Y39.25753
G01 X39.17532 Y39.25936
G01 X39.18020 Y39.21001
G01 X39.18020 Y39.02718
G01 X39.80671 Y38.40066
G01 X39.82266 Y38.35608
G01 X39.85921 Y38.26756
G01 X39.93933 Y38.09820
G01 X39.97397 Y38.03327
G01 X40.06749 Y37.87727
G01 X40.10059 Y37.82769
G01 X40.20684 Y37.68443
G01 X40.23981 Y37.64422
G01 X40.35845 Y37.51331
G01 X40.39348 Y37.47828
G01 X40.52436 Y37.35967
G01 X40.53191 Y37.35296
G01 X40.57224 Y37.34112
G01 X40.74867 Y37.29693
G01 X40.78830 Y37.28903
G01 X40.96472 Y37.26287
G01 X40.99807 Y37.25957
G01 X41.17450 Y37.25090
G01 X41.20587 Y37.25090
G01 X41.38227 Y37.25957
G01 X41.41562 Y37.26287
G01 X41.59205 Y37.28903
G01 X41.63168 Y37.29693
G01 X41.80811 Y37.34112
G01 X41.85860 Y37.35649
G01 X42.03503 Y37.41961
G01 X42.10211 Y37.44747
G01 X42.27856 Y37.53094
G01 X42.29970 Y37.54123
G01 X43.48065 Y37.54123
G01 X43.50178 Y37.53094
G01 X43.67823 Y37.44747
G01 X43.74531 Y37.41961
G01 X43.92174 Y37.35649
G01 X43.97224 Y37.34112
G01 X44.14867 Y37.29693
G01 X44.18829 Y37.28903
G01 X44.36472 Y37.26287
G01 X44.39807 Y37.25957
G01 X44.57450 Y37.25090
G01 X44.60587 Y37.25090
G01 X44.78227 Y37.25957
G01 X44.81562 Y37.26287
G01 X44.99205 Y37.28903
G01 X45.03167 Y37.29693
G01 X45.20810 Y37.34112
G01 X45.25857 Y37.35647
G01 X45.43500 Y37.41959
G01 X45.50218 Y37.44750
G01 X45.67861 Y37.53096
G01 X45.69969 Y37.54123
G01 X53.97024 Y37.54123
G01 X54.01448 Y37.54016
G01 X54.06505 Y37.53767
G01 X54.20958 Y37.52103
G01 X54.25345 Y37.51489
G01 X54.29632 Y37.50379
G01 X54.43422 Y37.46442
G01 X54.43627 Y37.46381
G01 X54.48390 Y37.44679
G01 X54.56566 Y37.41291
G01 X54.61141 Y37.39126
G01 X54.73859 Y37.32060
G01 X54.77681 Y37.29812
G01 X54.81217 Y37.27145
G01 X54.92614 Y37.18098
G01 X54.96363 Y37.14702
G01 X54.99568 Y37.11649
G01 X56.70869 Y35.40349
G01 X56.74379 Y35.37021
G01 X56.76355 Y35.35248
G01 X56.88682 Y35.25919
G01 X56.91539 Y35.25464
G01 X56.98527 Y35.24458
G01 X57.07620 Y35.23610
G01 X57.11476 Y35.23445
G01 X57.12151 Y35.23414
G01 X57.14102 Y35.23216
G01 X57.23800 Y35.20653
G01 X57.32207 Y35.16368
G01 X57.34666 Y35.14517
G01 X57.39543 Y35.10430
G01 X57.44617 Y35.04260
G01 X57.45481 Y35.03094
G01 X57.45890 Y35.02378
G01 X57.45905 Y35.02353
G01 X57.49769 Y34.94679
G01 X57.52331 Y34.84987
G01 X57.52530 Y34.83036
G01 X57.52644 Y34.78502
G01 X57.52644 Y34.52477
G01 X57.52837 Y34.46549
G01 X57.53050 Y34.43313
G01 X57.53203 Y34.41332
G01 X57.53548 Y34.39978
G01 X57.54214 Y34.37514
G01 X57.58897 Y34.21116
G01 X57.60007 Y34.16828
G01 X57.60622 Y34.12442
G01 X57.62286 Y33.97987
G01 X57.62535 Y33.92932
G01 X57.62535 Y33.84080
G01 X57.62286 Y33.79018
G01 X57.60622 Y33.64568
G01 X57.60007 Y33.60179
G01 X57.58897 Y33.55894
G01 X57.54214 Y33.39493
G01 X57.53548 Y33.37032
G01 X57.53203 Y33.35675
G01 X57.53050 Y33.33689
G01 X57.52837 Y33.30451
G01 X57.52644 Y33.24530
G01 X57.52644 Y32.98502
G01 X57.52530 Y32.93969
G01 X57.52331 Y32.92018
G01 X57.49769 Y32.82323
G01 X57.45931 Y32.74698
G01 X57.45481 Y32.73908
G01 X57.39543 Y32.66577
G01 X57.32207 Y32.60636
G01 X57.23800 Y32.56354
G01 X57.14102 Y32.53788
G01 X57.12149 Y32.53593
G01 X57.07620 Y32.53478
G01 X56.81592 Y32.53478
G01 X56.75700 Y32.53285
G01 X56.72464 Y32.53075
G01 X56.70447 Y32.52920
G01 X56.69091 Y32.52574
G01 X56.66624 Y32.51906
G01 X56.50229 Y32.47225
G01 X56.45941 Y32.46112
G01 X56.41554 Y32.45498
G01 X56.27099 Y32.43837
G01 X56.22047 Y32.43588
G01 X56.13193 Y32.43588
G01 X56.08133 Y32.43837
G01 X55.93680 Y32.45498
G01 X55.89294 Y32.46112
G01 X55.85006 Y32.47225
G01 X55.68611 Y32.51906
G01 X55.66144 Y32.52574
G01 X55.64788 Y32.52920
G01 X55.62771 Y32.53075
G01 X55.59535 Y32.53285
G01 X55.53645 Y32.53478
G01 X55.27615 Y32.53478
G01 X55.22482 Y32.53626
G01 X55.15009 Y32.54050
G01 X55.04783 Y32.59651
G01 X55.03025 Y32.60639
G01 X55.02576 Y32.60969
G01 X54.95690 Y32.66580
G01 X54.91504 Y32.71581
G01 X54.89754 Y32.73910
G01 X54.89314 Y32.74682
G01 X54.87422 Y32.78033
G01 X54.86401 Y32.79894
G01 X54.79002 Y32.93755
G01 X54.77371 Y32.95231
G01 X54.71778 Y32.99419
G01 X54.63820 Y33.04271
G01 X54.55088 Y33.07530
G01 X54.45898 Y33.09074
G01 X54.38928 Y33.09572
G01 X54.29612 Y33.09348
G01 X54.20508 Y33.07367
G01 X54.11944 Y33.03697
G01 X54.05812 Y33.00346
G01 X53.94659 Y32.91995
G01 X53.76757 Y32.74096
G01 X53.71618 Y32.70247
G01 X53.71618 Y32.86389
G01 X53.72342 Y32.86984
G01 X53.79137 Y32.93776
G01 X53.90328 Y33.07415
G01 X53.95665 Y33.15401
G01 X54.03983 Y33.30961
G01 X54.04605 Y33.32465
G01 X54.07659 Y33.39836
G01 X54.12779 Y33.56719
G01 X54.14654 Y33.66140
G01 X54.15962 Y33.79437
G01 X54.14367 Y33.83897
G01 X54.10712 Y33.92749
G01 X54.02700 Y34.09686
G01 X53.99238 Y34.16176
G01 X53.89886 Y34.31776
G01 X53.86577 Y34.36737
G01 X53.75952 Y34.51062
G01 X53.72652 Y34.55083
G01 X53.60790 Y34.68174
G01 X53.57285 Y34.71677
G01 X53.44791 Y34.83000
G01 X53.43993 Y34.83287
G01 X53.39081 Y34.84781
G01 X53.21438 Y34.89201
G01 X53.17616 Y34.89963
G01 X52.99973 Y34.92579
G01 X52.96765 Y34.92896
G01 X52.79119 Y34.93762
G01 X52.76114 Y34.93762
G01 X52.58472 Y34.92896
G01 X52.55264 Y34.92579
G01 X52.37621 Y34.89963
G01 X52.33798 Y34.89201
G01 X52.16155 Y34.84781
G01 X52.11245 Y34.83287
G01 X51.93603 Y34.76976
G01 X51.87037 Y34.74248
G01 X51.69391 Y34.65901
G01 X51.65729 Y34.64072
G01 X50.49506 Y34.64072
G01 X50.45843 Y34.65901
G01 X50.28198 Y34.74248
G01 X50.21634 Y34.76976
G01 X50.03994 Y34.83287
G01 X49.99082 Y34.84781
G01 X49.81439 Y34.89201
G01 X49.77616 Y34.89963
G01 X49.59973 Y34.92579
G01 X49.56765 Y34.92896
G01 X49.39120 Y34.93762
G01 X49.36115 Y34.93762
G01 X49.18470 Y34.92896
G01 X49.15262 Y34.92579
G01 X48.97619 Y34.89963
G01 X48.93796 Y34.89201
G01 X48.76153 Y34.84781
G01 X48.71241 Y34.83287
G01 X48.53601 Y34.76976
G01 X48.47040 Y34.74250
G01 X48.29395 Y34.65904
G01 X48.25727 Y34.64072
G01 X40.00923 Y34.64072
G01 X39.96495 Y34.64182
G01 X39.91438 Y34.64431
G01 X39.76983 Y34.66094
G01 X39.72597 Y34.66709
G01 X39.68309 Y34.67819
G01 X39.56513 Y34.71187
G01 X39.54331 Y34.71809
G01 X39.49554 Y34.73519
G01 X39.41375 Y34.76907
G01 X39.36795 Y34.79071
G01 X39.24083 Y34.86137
G01 X39.20262 Y34.88385
G01 X39.16722 Y34.91057
G01 X39.05332 Y35.00097
G01 X39.01576 Y35.03503
G01 X38.98373 Y35.06551
G01 X37.25765 Y36.79160
G01 X37.22275 Y36.82467
G01 X37.20301 Y36.84240
G01 X37.07954 Y36.93587
G01 X37.05076 Y36.94046
G01 X36.98086 Y36.95050
G01 X36.89018 Y36.95893
G01 X36.85160 Y36.96061
G01 X36.84492 Y36.96091
G01 X36.82541 Y36.96287
G01 X36.72839 Y36.98852
G01 X36.68493 Y37.00927
G01 X36.64431 Y37.03135
G01 X36.64043 Y37.03419
G01 X36.57091 Y37.09078
G01 X36.51152 Y37.16411
G01 X36.46867 Y37.24824
G01 X36.45800 Y37.28347
G01 X36.44302 Y37.34524
G01 X36.44106 Y37.36477
G01 X36.43992 Y37.41001
G01 X36.43992 Y37.67031
G01 X36.43799 Y37.72921
G01 X36.43588 Y37.76157
G01 X36.43433 Y37.78169
G01 X36.43085 Y37.79530
G01 X36.42419 Y37.81994
G01 X36.40111 Y37.90079
G01 X36.37738 Y37.98392
G01 X36.36626 Y38.02680
G01 X36.36011 Y38.07066
G01 X36.34347 Y38.21521
G01 X36.34098 Y38.26576
G01 X36.34098 Y38.35428
G01 X36.34347 Y38.40485
G01 X36.36011 Y38.54940
G01 X36.36626 Y38.59327
G01 X36.37738 Y38.63614
G01 X36.39018 Y38.68100
G01 X36.42419 Y38.80010
G01 X36.43085 Y38.82476
G01 X36.43433 Y38.83838
G01 X36.43588 Y38.85852
G01 X36.43799 Y38.89088
G01 X36.43992 Y38.94978
G01 X36.43992 Y39.21003
G01 X36.44106 Y39.25529
G01 X36.44302 Y39.27480
G01 X36.46867 Y39.37183
G01 X36.51152 Y39.45593
G01 X36.57091 Y39.52926
G01 X36.64429 Y39.58867
G01 X36.72836 Y39.63152
G01 X36.82539 Y39.65717
G01 X36.84492 Y39.65913
G01 X36.89018 Y39.66027
G01 X37.15046 Y39.66027
G01 X37.20936 Y39.66220
G01 X37.24172 Y39.66431
G01 X37.26181 Y39.66586
G01 X37.27543 Y39.66934
G01 X37.30009 Y39.67599
G01 X37.44959 Y39.71869
G01 X37.46405 Y39.72281
G01 X37.50700 Y39.73396
G01 X37.50865 Y39.73421
G01 X37.55079 Y39.74008
G01 X37.69534 Y39.75672
G01 X37.74591 Y39.75920
G01 X37.83443 Y39.75920
G01 X37.88500 Y39.75672
G01 X38.02953 Y39.74008
G01 X38.07342 Y39.73393
G01 X38.11627 Y39.72283
G01 X38.28022 Y39.67599
G01 X38.30489 Y39.66934
G01 X38.31850 Y39.66586
G01 X38.33867 Y39.66431
G01 X38.37103 Y39.66220
G01 X38.42993 Y39.66027
G01 X38.69018 Y39.66027
G01 X38.74151 Y39.65880
G01 X38.81627 Y39.65453
G01 X38.91837 Y39.59863
G01 X38.93608 Y39.58867
G01 X39.00941 Y39.52926
G01 X39.06879 Y39.45595
G01 X39.07319 Y39.44823
G01 X39.09234 Y39.41432
G01 X39.10255 Y39.39571
G01 X39.17532 Y39.25936
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.80757 Y41.57939 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.80757 Y41.57939
G01 X40.84179 Y41.69220
G01 X40.86053 Y41.78640
G01 X40.87783 Y41.96199
G01 X40.87783 Y42.05803
G01 X40.86053 Y42.23362
G01 X40.84179 Y42.32783
G01 X40.80656 Y42.44398
G01 X40.81753 Y42.42864
G01 X40.82927 Y42.41795
G01 X40.93127 Y42.36222
G01 X40.99612 Y42.33624
G01 X41.08555 Y42.30995
G01 X41.17836 Y42.30108
G01 X41.27115 Y42.30995
G01 X41.33978 Y42.32318
G01 X41.42916 Y42.34945
G01 X41.51197 Y42.39214
G01 X41.57166 Y42.43911
G01 X41.57283 Y42.44073
G01 X41.58179 Y42.45331
G01 X41.60557 Y42.49194
G01 X41.61992 Y42.51455
G01 X41.65599 Y42.56966
G01 X41.69000 Y42.62595
G01 X41.74379 Y42.72277
G01 X41.77303 Y42.77167
G01 X41.79259 Y42.79671
G01 X41.89967 Y42.92907
G01 X41.90391 Y42.93359
G01 X41.96764 Y42.99501
G01 X42.04844 Y43.06552
G01 X42.10391 Y43.10708
G01 X42.17732 Y43.15661
G01 X42.21501 Y43.17944
G01 X42.33310 Y43.23941
G01 X42.39627 Y43.26847
G01 X42.41445 Y43.27423
G01 X42.58316 Y43.32587
G01 X42.58941 Y43.32775
G01 X42.67039 Y43.34160
G01 X42.78926 Y43.35640
G01 X42.84595 Y43.35920
G01 X42.93444 Y43.35920
G01 X42.99406 Y43.35625
G01 X43.02428 Y43.35369
G01 X43.05154 Y43.35181
G01 X43.11077 Y43.34965
G01 X43.20429 Y43.34929
G01 X43.23973 Y43.34977
G01 X43.24638 Y43.34998
G01 X43.37684 Y43.31040
G01 X43.46558 Y43.27365
G01 X43.62118 Y43.19047
G01 X43.70104 Y43.13710
G01 X43.83744 Y43.02519
G01 X43.90536 Y42.95727
G01 X43.92149 Y42.93761
G01 X43.92294 Y42.93446
G01 X43.92296 Y42.93446
G01 X43.93061 Y42.91818
G01 X43.96258 Y42.85404
G01 X43.99177 Y42.79997
G01 X44.02738 Y42.73885
G01 X44.03652 Y42.72283
G01 X44.10701 Y42.59600
G01 X44.12017 Y42.56748
G01 X44.15329 Y42.48534
G01 X44.18019 Y42.40794
G01 X44.20444 Y42.31650
G01 X44.22293 Y42.22994
G01 X44.22593 Y42.21145
G01 X44.23299 Y42.13024
G01 X44.23957 Y42.05427
G01 X44.24231 Y42.01003
G01 X44.23957 Y41.96573
G01 X44.23302 Y41.89019
G01 X44.22596 Y41.80871
G01 X44.22293 Y41.79011
G01 X44.20444 Y41.70355
G01 X44.18019 Y41.61211
G01 X44.15329 Y41.53472
G01 X44.12017 Y41.45257
G01 X44.10701 Y41.42402
G01 X44.03652 Y41.29723
G01 X44.00734 Y41.24838
G01 X43.98781 Y41.22336
G01 X43.88064 Y41.09090
G01 X43.87648 Y41.08651
G01 X43.81267 Y41.02501
G01 X43.73190 Y40.95450
G01 X43.67640 Y40.91295
G01 X43.60305 Y40.86344
G01 X43.56535 Y40.84061
G01 X43.49012 Y40.80243
G01 X43.44724 Y40.78064
G01 X43.38407 Y40.75158
G01 X43.36589 Y40.74582
G01 X43.19718 Y40.69418
G01 X43.19093 Y40.69230
G01 X43.10998 Y40.67846
G01 X42.99109 Y40.66365
G01 X42.93444 Y40.66085
G01 X42.84595 Y40.66085
G01 X42.78926 Y40.66365
G01 X42.67039 Y40.67846
G01 X42.58941 Y40.69230
G01 X42.58316 Y40.69418
G01 X42.41445 Y40.74582
G01 X42.39627 Y40.75158
G01 X42.33310 Y40.78064
G01 X42.21499 Y40.84061
G01 X42.17729 Y40.86344
G01 X42.10391 Y40.91297
G01 X42.04854 Y40.95443
G01 X41.96767 Y41.02506
G01 X41.90391 Y41.08646
G01 X41.89965 Y41.09100
G01 X41.79259 Y41.22331
G01 X41.77303 Y41.24836
G01 X41.74379 Y41.29728
G01 X41.69000 Y41.39410
G01 X41.65599 Y41.45039
G01 X41.64438 Y41.46814
G01 X41.61936 Y41.50855
G01 X41.60757 Y41.52872
G01 X41.56282 Y41.59141
G01 X41.55108 Y41.60210
G01 X41.44908 Y41.65783
G01 X41.38423 Y41.68381
G01 X41.29480 Y41.71010
G01 X41.20199 Y41.71897
G01 X41.10920 Y41.71010
G01 X41.04057 Y41.69687
G01 X40.95119 Y41.67061
G01 X40.86838 Y41.62791
G01 X40.80869 Y41.58094
G01 X40.80757 Y41.57939
G01 X40.79856 Y41.56674
G01 X40.77478 Y41.52811
G01 X40.76043 Y41.50551
G01 X40.72436 Y41.45039
G01 X40.69035 Y41.39410
G01 X40.63656 Y41.29728
G01 X40.60732 Y41.24838
G01 X40.58776 Y41.22334
G01 X40.48063 Y41.09090
G01 X40.47643 Y41.08646
G01 X40.41271 Y41.02504
G01 X40.33191 Y40.95453
G01 X40.27644 Y40.91297
G01 X40.20305 Y40.86344
G01 X40.16536 Y40.84061
G01 X40.04725 Y40.78064
G01 X39.98408 Y40.75158
G01 X39.96589 Y40.74582
G01 X39.79719 Y40.69418
G01 X39.79094 Y40.69230
G01 X39.70996 Y40.67846
G01 X39.59107 Y40.66365
G01 X39.53440 Y40.66085
G01 X39.44591 Y40.66085
G01 X39.38924 Y40.66365
G01 X39.27037 Y40.67846
G01 X39.26491 Y40.67914
G01 X39.18190 Y40.68999
G01 X39.14309 Y40.69425
G01 X39.10958 Y40.69720
G01 X39.01395 Y40.74412
G01 X38.99147 Y40.75356
G01 X38.93311 Y40.78064
G01 X38.81502 Y40.84061
G01 X38.77730 Y40.86344
G01 X38.70395 Y40.91295
G01 X38.64845 Y40.95450
G01 X38.56768 Y41.02504
G01 X38.50387 Y41.08651
G01 X38.49965 Y41.09098
G01 X38.39254 Y41.22336
G01 X38.37301 Y41.24838
G01 X38.34383 Y41.29723
G01 X38.27334 Y41.42407
G01 X38.26018 Y41.45257
G01 X38.22706 Y41.53472
G01 X38.20016 Y41.61211
G01 X38.17591 Y41.70355
G01 X38.15741 Y41.79011
G01 X38.15439 Y41.80868
G01 X38.14078 Y41.96573
G01 X38.13803 Y42.01003
G01 X38.14078 Y42.05427
G01 X38.15439 Y42.21137
G01 X38.15741 Y42.22994
G01 X38.17591 Y42.31650
G01 X38.20016 Y42.40794
G01 X38.22706 Y42.48534
G01 X38.26018 Y42.56748
G01 X38.27334 Y42.59603
G01 X38.34383 Y42.72283
G01 X38.37301 Y42.77167
G01 X38.39254 Y42.79669
G01 X38.49965 Y42.92907
G01 X38.50387 Y42.93354
G01 X38.56768 Y42.99501
G01 X38.64845 Y43.06555
G01 X38.70395 Y43.10710
G01 X38.77730 Y43.15661
G01 X38.81500 Y43.17944
G01 X38.93311 Y43.23941
G01 X38.99625 Y43.26847
G01 X39.01446 Y43.27423
G01 X39.18317 Y43.32587
G01 X39.18939 Y43.32775
G01 X39.27037 Y43.34160
G01 X39.38926 Y43.35640
G01 X39.44591 Y43.35920
G01 X39.53440 Y43.35920
G01 X39.59109 Y43.35640
G01 X39.70996 Y43.34160
G01 X39.79094 Y43.32775
G01 X39.79719 Y43.32587
G01 X39.96589 Y43.27423
G01 X39.98408 Y43.26847
G01 X40.04725 Y43.23941
G01 X40.16534 Y43.17944
G01 X40.20303 Y43.15661
G01 X40.27644 Y43.10708
G01 X40.33191 Y43.06552
G01 X40.41271 Y42.99501
G01 X40.47643 Y42.93359
G01 X40.48068 Y42.92907
G01 X40.58776 Y42.79671
G01 X40.60732 Y42.77167
G01 X40.63656 Y42.72277
G01 X40.69035 Y42.62598
G01 X40.72436 Y42.56966
G01 X40.73597 Y42.55191
G01 X40.76099 Y42.51150
G01 X40.77278 Y42.49133
G01 X40.80656 Y42.44398
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.60757 Y41.52872 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.60757 Y41.52872
G01 X41.57382 Y41.57602
G01 X41.53859 Y41.69220
G01 X41.51984 Y41.78640
G01 X41.50254 Y41.96199
G01 X41.50254 Y42.05803
G01 X41.51984 Y42.23362
G01 X41.53859 Y42.32783
G01 X41.57283 Y42.44073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.59383 Y44.18200 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.59383 Y44.18200
G01 X43.62890 Y44.11810
G01 X43.77155 Y43.97545
G01 X43.80716 Y43.94314
G01 X43.95870 Y43.81878
G01 X44.03858 Y43.76542
G01 X44.21145 Y43.67301
G01 X44.30020 Y43.63626
G01 X44.36916 Y43.61533
G01 X44.42006 Y43.61421
G01 X44.48402 Y43.60878
G01 X44.49639 Y43.60763
G01 X44.58575 Y43.59887
G01 X44.60066 Y43.59727
G01 X44.73030 Y43.58236
G01 X44.78087 Y43.57987
G01 X44.82514 Y43.57878
G01 X46.84018 Y43.57878
G01 X46.88445 Y43.57987
G01 X46.93499 Y43.58236
G01 X47.07952 Y43.59897
G01 X47.12341 Y43.60512
G01 X47.16626 Y43.61625
G01 X47.30619 Y43.65620
G01 X47.35384 Y43.67324
G01 X47.43560 Y43.70710
G01 X47.48140 Y43.72877
G01 X47.60853 Y43.79940
G01 X47.64673 Y43.82188
G01 X47.68214 Y43.84860
G01 X47.79605 Y43.93903
G01 X47.83362 Y43.97306
G01 X47.89613 Y44.03557
G01 X47.93017 Y44.07314
G01 X48.02059 Y44.18706
G01 X48.04734 Y44.22249
G01 X48.06979 Y44.26067
G01 X48.14043 Y44.38777
G01 X48.16209 Y44.43359
G01 X48.19595 Y44.51535
G01 X48.21300 Y44.56300
G01 X48.25295 Y44.70293
G01 X48.26407 Y44.74578
G01 X48.27022 Y44.78967
G01 X48.28683 Y44.93420
G01 X48.28932 Y44.98475
G01 X48.28932 Y45.07329
G01 X48.28683 Y45.12386
G01 X48.27020 Y45.26841
G01 X48.26407 Y45.31225
G01 X48.25295 Y45.35515
G01 X48.21300 Y45.49506
G01 X48.19595 Y45.54273
G01 X48.16456 Y45.61921
G01 X48.16209 Y45.62450
G01 X48.14045 Y45.67024
G01 X48.06976 Y45.79742
G01 X48.04731 Y45.83560
G01 X48.02059 Y45.87103
G01 X47.93017 Y45.98492
G01 X47.89613 Y46.02249
G01 X47.83360 Y46.08500
G01 X47.79608 Y46.11901
G01 X47.68214 Y46.20946
G01 X47.64675 Y46.23615
G01 X47.60853 Y46.25866
G01 X47.48137 Y46.32932
G01 X47.43560 Y46.35096
G01 X47.35381 Y46.38485
G01 X47.30622 Y46.40186
G01 X47.16626 Y46.44184
G01 X47.12341 Y46.45294
G01 X47.07952 Y46.45909
G01 X46.93497 Y46.47573
G01 X46.88442 Y46.47822
G01 X46.84018 Y46.47928
G01 X45.66372 Y46.47928
G01 X45.53424 Y46.48860
G01 X45.46436 Y46.49866
G01 X45.43573 Y46.50321
G01 X45.31275 Y46.59625
G01 X45.29299 Y46.61398
G01 X45.25765 Y46.64746
G01 X41.03061 Y50.87450
G01 X40.94560 Y50.97272
G01 X40.90328 Y51.02924
G01 X40.88634 Y51.05260
G01 X40.86516 Y51.20559
G01 X40.86373 Y51.23208
G01 X40.86241 Y51.28054
G01 X40.86241 Y62.50696
G01 X40.86135 Y62.55123
G01 X40.85886 Y62.60181
G01 X40.84997 Y62.67900
G01 X40.84222 Y62.74636
G01 X40.83607 Y62.79025
G01 X40.82497 Y62.83310
G01 X40.78502 Y62.97300
G01 X40.76798 Y63.02068
G01 X40.73706 Y63.09614
G01 X40.73409 Y63.10244
G01 X40.71245 Y63.14821
G01 X40.64179 Y63.27536
G01 X40.61931 Y63.31359
G01 X40.59317 Y63.34826
G01 X40.59261 Y63.34897
G01 X40.50219 Y63.46289
G01 X40.46815 Y63.50043
G01 X40.43765 Y63.53246
G01 X39.06371 Y64.90642
G01 X38.27865 Y65.69146
G01 X38.24662 Y65.72194
G01 X38.20908 Y65.75600
G01 X38.09516 Y65.84640
G01 X38.05975 Y65.87312
G01 X38.02155 Y65.89560
G01 X37.89437 Y65.96626
G01 X37.84863 Y65.98790
G01 X37.76686 Y66.02179
G01 X37.71919 Y66.03883
G01 X37.57929 Y66.07879
G01 X37.53644 Y66.08989
G01 X37.49254 Y66.09603
G01 X37.34802 Y66.11267
G01 X37.29745 Y66.11516
G01 X37.20893 Y66.11516
G01 X37.15833 Y66.11267
G01 X37.01381 Y66.09603
G01 X36.96991 Y66.08989
G01 X36.92706 Y66.07879
G01 X36.78716 Y66.03883
G01 X36.73949 Y66.02179
G01 X36.65772 Y65.98790
G01 X36.61195 Y65.96626
G01 X36.48480 Y65.89560
G01 X36.44660 Y65.87312
G01 X36.41119 Y65.84643
G01 X36.29727 Y65.75600
G01 X36.25973 Y65.72197
G01 X36.19722 Y65.65943
G01 X36.16318 Y65.62189
G01 X36.07276 Y65.50797
G01 X36.04604 Y65.47256
G01 X36.02356 Y65.43436
G01 X35.95290 Y65.30718
G01 X35.93126 Y65.26144
G01 X35.89737 Y65.17968
G01 X35.88033 Y65.13200
G01 X35.84038 Y64.99210
G01 X35.82928 Y64.94925
G01 X35.82313 Y64.90536
G01 X35.80649 Y64.76083
G01 X35.80400 Y64.71023
G01 X35.80400 Y64.62172
G01 X35.80649 Y64.57114
G01 X35.82313 Y64.42662
G01 X35.82928 Y64.38273
G01 X35.84038 Y64.33988
G01 X35.88033 Y64.19997
G01 X35.89737 Y64.15230
G01 X35.93126 Y64.07054
G01 X35.95290 Y64.02479
G01 X36.02356 Y63.89761
G01 X36.04604 Y63.85941
G01 X36.07276 Y63.82400
G01 X36.16316 Y63.71011
G01 X36.19722 Y63.67254
G01 X36.22770 Y63.64051
G01 X37.79374 Y62.07448
G01 X37.87875 Y61.97625
G01 X37.92107 Y61.91974
G01 X37.93801 Y61.89637
G01 X37.95919 Y61.74339
G01 X37.96062 Y61.71689
G01 X37.96194 Y61.66841
G01 X37.96194 Y50.44196
G01 X37.96300 Y50.39772
G01 X37.96549 Y50.34714
G01 X37.97451 Y50.26876
G01 X37.98213 Y50.20262
G01 X37.98828 Y50.15875
G01 X37.99938 Y50.11588
G01 X38.03933 Y49.97597
G01 X38.05637 Y49.92830
G01 X38.09026 Y49.84654
G01 X38.11190 Y49.80079
G01 X38.18256 Y49.67361
G01 X38.20504 Y49.63541
G01 X38.23176 Y49.60000
G01 X38.32218 Y49.48608
G01 X38.35622 Y49.44854
G01 X38.38670 Y49.41651
G01 X43.46655 Y44.33664
G01 X43.55154 Y44.23849
G01 X43.59383 Y44.18200
G01 X43.65687 Y44.06710
G01 X43.66817 Y44.01515
G01 X43.67041 Y43.92204
G01 X43.66543 Y43.85234
G01 X43.64999 Y43.76047
G01 X43.61745 Y43.67319
G01 X43.56896 Y43.59364
G01 X43.52710 Y43.53771
G01 X43.46441 Y43.46875
G01 X43.38981 Y43.41289
G01 X43.30597 Y43.37218
G01 X43.24638 Y43.34998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.92294 Y42.93446 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.92294 Y42.93446
G01 X43.91224 Y43.00908
G01 X43.91666 Y43.10205
G01 X43.93858 Y43.19252
G01 X43.96142 Y43.25856
G01 X44.00013 Y43.34335
G01 X44.05418 Y43.41929
G01 X44.12164 Y43.48361
G01 X44.17655 Y43.52679
G01 X44.25062 Y43.57489
G01 X44.33210 Y43.60893
G01 X44.36210 Y43.61548
G01 X44.42006 Y43.61421
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.57172 Y48.85301 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.57172 Y48.85301
G01 X47.71353 Y48.85301
G01 X47.80969 Y48.67311
G01 X47.86306 Y48.59325
G01 X48.06204 Y48.35078
G01 X48.12996 Y48.28286
G01 X48.37243 Y48.08388
G01 X48.45229 Y48.03051
G01 X48.63217 Y47.93437
G01 X48.63217 Y47.79256
G01 X48.54327 Y47.83259
G01 X48.31444 Y47.97092
G01 X48.10398 Y48.13579
G01 X47.91495 Y48.32482
G01 X47.75005 Y48.53529
G01 X47.61173 Y48.76411
G01 X47.57172 Y48.85301
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.57172 Y50.73302 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.57172 Y50.73302
G01 X47.71353 Y50.73302
G01 X47.80969 Y50.91290
G01 X47.86306 Y50.99279
G01 X48.06204 Y51.23523
G01 X48.12996 Y51.30315
G01 X48.37243 Y51.50213
G01 X48.45229 Y51.55550
G01 X48.63217 Y51.65166
G01 X48.63217 Y51.79347
G01 X48.54327 Y51.75347
G01 X48.31444 Y51.61514
G01 X48.10398 Y51.45024
G01 X47.91495 Y51.26121
G01 X47.75005 Y51.05075
G01 X47.61173 Y50.82195
G01 X47.57172 Y50.73302
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.83998 Y54.63002 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.83998 Y54.63002
G01 X42.84260 Y54.67431
G01 X42.85763 Y54.85468
G01 X42.86584 Y54.90840
G01 X42.88349 Y54.99514
G01 X42.90386 Y55.07502
G01 X42.95169 Y55.22026
G01 X42.97706 Y55.28810
G01 X42.98448 Y55.30248
G01 X43.08192 Y55.48762
G01 X43.09561 Y55.50982
G01 X43.14575 Y55.58285
G01 X43.21280 Y55.67088
G01 X43.29497 Y55.76471
G01 X43.35654 Y55.82841
G01 X43.36530 Y55.83664
G01 X43.53818 Y55.97789
G01 X43.53980 Y55.97921
G01 X43.61283 Y56.02567
G01 X43.73338 Y56.09445
G01 X43.82032 Y56.13649
G01 X43.90183 Y56.17108
G01 X43.93952 Y56.18493
G01 X43.97838 Y56.19626
G01 X44.12687 Y56.23959
G01 X44.15606 Y56.24756
G01 X44.21382 Y56.25628
G01 X44.37960 Y56.27583
G01 X44.44793 Y56.27919
G01 X44.53645 Y56.27919
G01 X44.60472 Y56.27583
G01 X44.71651 Y56.26265
G01 X44.77053 Y56.25628
G01 X44.82834 Y56.24756
G01 X44.85748 Y56.23959
G01 X44.94242 Y56.21480
G01 X45.04480 Y56.18495
G01 X45.08252 Y56.17108
G01 X45.16403 Y56.13649
G01 X45.25097 Y56.09445
G01 X45.37152 Y56.02567
G01 X45.44455 Y55.97921
G01 X45.44617 Y55.97789
G01 X45.61905 Y55.83664
G01 X45.62781 Y55.82841
G01 X45.68938 Y55.76471
G01 X45.77155 Y55.67088
G01 X45.83860 Y55.58285
G01 X45.88874 Y55.50982
G01 X45.90243 Y55.48762
G01 X45.99987 Y55.30248
G01 X46.00728 Y55.28810
G01 X46.03266 Y55.22026
G01 X46.08046 Y55.07507
G01 X46.10086 Y54.99514
G01 X46.11851 Y54.90840
G01 X46.12672 Y54.85468
G01 X46.14175 Y54.67431
G01 X46.14437 Y54.63002
G01 X46.14175 Y54.58574
G01 X46.12672 Y54.40538
G01 X46.11851 Y54.35166
G01 X46.10086 Y54.26492
G01 X46.08049 Y54.18501
G01 X46.03266 Y54.03977
G01 X46.00728 Y53.97193
G01 X45.99987 Y53.95755
G01 X45.90243 Y53.77244
G01 X45.88874 Y53.75021
G01 X45.83858 Y53.67719
G01 X45.77155 Y53.58917
G01 X45.68935 Y53.49532
G01 X45.62781 Y53.43164
G01 X45.61905 Y53.42341
G01 X45.44617 Y53.28216
G01 X45.44455 Y53.28084
G01 X45.37152 Y53.23439
G01 X45.25097 Y53.16560
G01 X45.16403 Y53.12357
G01 X45.08252 Y53.08897
G01 X45.04480 Y53.07513
G01 X44.85748 Y53.02047
G01 X44.82829 Y53.01249
G01 X44.77053 Y53.00378
G01 X44.60475 Y52.98422
G01 X44.53645 Y52.98087
G01 X44.44793 Y52.98087
G01 X44.37955 Y52.98422
G01 X44.37597 Y52.98465
G01 X44.21382 Y53.00378
G01 X44.15606 Y53.01249
G01 X44.12687 Y53.02047
G01 X43.93952 Y53.07513
G01 X43.90183 Y53.08897
G01 X43.83081 Y53.11856
G01 X43.82032 Y53.12354
G01 X43.73338 Y53.16558
G01 X43.61283 Y53.23439
G01 X43.53980 Y53.28084
G01 X43.53818 Y53.28216
G01 X43.36530 Y53.42341
G01 X43.35654 Y53.43164
G01 X43.29500 Y53.49532
G01 X43.21280 Y53.58917
G01 X43.14577 Y53.67719
G01 X43.09561 Y53.75021
G01 X43.08192 Y53.77244
G01 X42.98448 Y53.95755
G01 X42.97706 Y53.97195
G01 X42.95169 Y54.03977
G01 X42.90386 Y54.18501
G01 X42.88349 Y54.26492
G01 X42.86584 Y54.35166
G01 X42.85809 Y54.40246
G01 X42.85763 Y54.40538
G01 X42.84260 Y54.58574
G01 X42.83998 Y54.63002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.37828 Y59.43758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.37828 Y59.43758
G01 X34.38816 Y59.53796
G01 X34.38816 Y59.63399
G01 X34.37828 Y59.73437
G01 X34.49070 Y59.84682
G01 X34.49923 Y59.80572
G01 X34.51427 Y59.58599
G01 X34.49923 Y59.36625
G01 X34.49070 Y59.32515
G01 X34.37828 Y59.43758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.64046 Y61.17539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.64046 Y61.17539
G01 X32.75212 Y61.06373
G01 X32.85247 Y61.07361
G01 X32.94854 Y61.07361
G01 X33.04887 Y61.06373
G01 X33.16052 Y61.17539
G01 X33.01064 Y61.19599
G01 X32.79037 Y61.19599
G01 X32.64046 Y61.17539
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.28674 Y59.58599 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.28674 Y59.58599
G01 X31.30178 Y59.36625
G01 X31.31031 Y59.32515
G01 X31.42276 Y59.43760
G01 X31.41288 Y59.53796
G01 X31.41288 Y59.63399
G01 X31.42276 Y59.73437
G01 X31.31031 Y59.84682
G01 X31.30178 Y59.80572
G01 X31.28674 Y59.58599
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.64046 Y57.99661 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.64046 Y57.99661
G01 X32.75209 Y58.10822
G01 X32.85247 Y58.09833
G01 X32.94854 Y58.09833
G01 X33.04889 Y58.10822
G01 X33.16052 Y57.99658
G01 X33.01064 Y57.97598
G01 X32.79039 Y57.97598
G01 X32.64046 Y57.99661
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.45025 Y58.58596 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.45025 Y58.58596
G01 X26.45139 Y58.54075
G01 X26.45335 Y58.52119
G01 X26.46597 Y58.46806
G01 X26.47898 Y58.42422
G01 X26.52188 Y58.34007
G01 X26.58126 Y58.26674
G01 X26.65076 Y58.21015
G01 X26.65459 Y58.20735
G01 X26.69526 Y58.18523
G01 X26.73872 Y58.16448
G01 X26.83564 Y58.13885
G01 X26.85518 Y58.13687
G01 X26.90052 Y58.13575
G01 X28.90049 Y58.13575
G01 X28.94583 Y58.13687
G01 X28.96536 Y58.13885
G01 X29.06228 Y58.16448
G01 X29.14641 Y58.20733
G01 X29.21974 Y58.26674
G01 X29.27915 Y58.34007
G01 X29.32200 Y58.42417
G01 X29.34765 Y58.52122
G01 X29.34961 Y58.54073
G01 X29.35075 Y58.58596
G01 X29.35075 Y60.58599
G01 X29.34961 Y60.63125
G01 X29.34765 Y60.65076
G01 X29.32200 Y60.74781
G01 X29.27917 Y60.83186
G01 X29.27633 Y60.83574
G01 X29.21976 Y60.90524
G01 X29.15662 Y60.95708
G01 X29.14636 Y60.96467
G01 X29.06226 Y61.00750
G01 X28.96528 Y61.03315
G01 X28.94603 Y61.03508
G01 X28.90049 Y61.03623
G01 X26.90052 Y61.03623
G01 X26.85515 Y61.03511
G01 X26.83564 Y61.03313
G01 X26.73872 Y61.00750
G01 X26.65459 Y60.96465
G01 X26.58126 Y60.90524
G01 X26.52185 Y60.83188
G01 X26.47900 Y60.74781
G01 X26.45335 Y60.65078
G01 X26.45139 Y60.63125
G01 X26.45025 Y60.58599
G01 X26.45025 Y58.58596
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.84084 Y54.11716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.84084 Y54.11716
G01 X19.84358 Y54.16141
G01 X19.85590 Y54.30360
G01 X19.85819 Y54.31757
G01 X19.87665 Y54.40416
G01 X19.89829 Y54.48564
G01 X19.92212 Y54.55425
G01 X19.95524 Y54.63637
G01 X19.96606 Y54.65981
G01 X20.02974 Y54.77436
G01 X20.05842 Y54.82242
G01 X20.07851 Y54.84818
G01 X20.17561 Y54.96822
G01 X20.17729 Y54.96999
G01 X20.24109 Y55.03144
G01 X20.31341 Y55.09456
G01 X20.36220 Y55.13111
G01 X20.43550 Y55.18059
G01 X20.46766 Y55.20007
G01 X20.57404 Y55.25409
G01 X20.63550 Y55.28247
G01 X20.65549 Y55.28884
G01 X20.80546 Y55.33469
G01 X20.81429 Y55.33735
G01 X20.87558 Y55.34833
G01 X20.89258 Y55.35061
G01 X20.99941 Y55.36392
G01 X21.04861 Y55.36634
G01 X21.13708 Y55.36634
G01 X21.18628 Y55.36392
G01 X21.28379 Y55.35178
G01 X21.29308 Y55.35061
G01 X21.37132 Y55.33735
G01 X21.38018 Y55.33471
G01 X21.53017 Y55.28884
G01 X21.55018 Y55.28247
G01 X21.61165 Y55.25409
G01 X21.71803 Y55.20007
G01 X21.75018 Y55.18059
G01 X21.82349 Y55.13111
G01 X21.87228 Y55.09458
G01 X21.94459 Y55.03144
G01 X22.00840 Y54.96999
G01 X22.01005 Y54.96822
G01 X22.10718 Y54.84818
G01 X22.12727 Y54.82240
G01 X22.15597 Y54.77431
G01 X22.21963 Y54.65978
G01 X22.23045 Y54.63631
G01 X22.26354 Y54.55430
G01 X22.28737 Y54.48567
G01 X22.30901 Y54.40421
G01 X22.32750 Y54.31757
G01 X22.32763 Y54.31681
G01 X22.32976 Y54.30360
G01 X22.34210 Y54.16141
G01 X22.34485 Y54.11716
G01 X22.34210 Y54.07294
G01 X22.33847 Y54.03119
G01 X22.32976 Y53.93075
G01 X22.32750 Y53.91678
G01 X22.30901 Y53.83014
G01 X22.28737 Y53.74869
G01 X22.26354 Y53.68006
G01 X22.23045 Y53.59804
G01 X22.21963 Y53.57457
G01 X22.15597 Y53.46004
G01 X22.12727 Y53.41196
G01 X22.10718 Y53.38618
G01 X22.01005 Y53.26614
G01 X22.00840 Y53.26436
G01 X21.94459 Y53.20292
G01 X21.87228 Y53.13977
G01 X21.82349 Y53.10325
G01 X21.75018 Y53.05377
G01 X21.71803 Y53.03429
G01 X21.61165 Y52.98026
G01 X21.55018 Y52.95189
G01 X21.53017 Y52.94551
G01 X21.38018 Y52.89964
G01 X21.37134 Y52.89700
G01 X21.29308 Y52.88374
G01 X21.18625 Y52.87043
G01 X21.13708 Y52.86802
G01 X21.04861 Y52.86802
G01 X20.99944 Y52.87043
G01 X20.89258 Y52.88374
G01 X20.81435 Y52.89700
G01 X20.80546 Y52.89967
G01 X20.65549 Y52.94551
G01 X20.63548 Y52.95189
G01 X20.57404 Y52.98026
G01 X20.47693 Y53.02956
G01 X20.46771 Y53.03426
G01 X20.43550 Y53.05377
G01 X20.36220 Y53.10325
G01 X20.31341 Y53.13980
G01 X20.24109 Y53.20292
G01 X20.17729 Y53.26436
G01 X20.17561 Y53.26614
G01 X20.07851 Y53.38618
G01 X20.05844 Y53.41193
G01 X20.02974 Y53.45999
G01 X19.96606 Y53.57457
G01 X19.95524 Y53.59799
G01 X19.92212 Y53.68011
G01 X19.89829 Y53.74869
G01 X19.87668 Y53.83019
G01 X19.85819 Y53.91678
G01 X19.85590 Y53.93075
G01 X19.84358 Y54.07294
G01 X19.84084 Y54.11716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.14420 Y58.17550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.14420 Y58.17550
G01 X18.22281 Y58.25414
G01 X18.22845 Y58.17550
G01 X18.22281 Y58.09689
G01 X18.14420 Y58.17550
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.73622 Y59.58347 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.73622 Y59.58347
G01 X16.81486 Y59.58911
G01 X16.89342 Y59.58350
G01 X16.81481 Y59.50489
G01 X16.73622 Y59.58347
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.40122 Y58.17550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.40122 Y58.17550
G01 X15.40686 Y58.25414
G01 X15.48548 Y58.17550
G01 X15.40686 Y58.09689
G01 X15.40122 Y58.17550
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.73620 Y56.76753 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.73620 Y56.76753
G01 X16.81481 Y56.84614
G01 X16.89347 Y56.76753
G01 X16.81481 Y56.76189
G01 X16.73620 Y56.76753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.84082 Y54.11719 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.84082 Y54.11719
G01 X14.84359 Y54.16149
G01 X14.85591 Y54.30363
G01 X14.85820 Y54.31765
G01 X14.87666 Y54.40416
G01 X14.89830 Y54.48564
G01 X14.92210 Y54.55425
G01 X14.95520 Y54.63631
G01 X14.96607 Y54.65978
G01 X15.02970 Y54.77431
G01 X15.05843 Y54.82242
G01 X15.07849 Y54.84818
G01 X15.17565 Y54.96824
G01 X15.17727 Y54.96999
G01 X15.24105 Y55.03144
G01 X15.31334 Y55.09456
G01 X15.36216 Y55.13111
G01 X15.43549 Y55.18059
G01 X15.46762 Y55.20007
G01 X15.57400 Y55.25409
G01 X15.63549 Y55.28247
G01 X15.65550 Y55.28884
G01 X15.80549 Y55.33471
G01 X15.81430 Y55.33735
G01 X15.87559 Y55.34833
G01 X15.89259 Y55.35061
G01 X15.99939 Y55.36392
G01 X16.04859 Y55.36634
G01 X16.13706 Y55.36634
G01 X16.18629 Y55.36392
G01 X16.28380 Y55.35178
G01 X16.29309 Y55.35061
G01 X16.37130 Y55.33735
G01 X16.38019 Y55.33469
G01 X16.53018 Y55.28884
G01 X16.55014 Y55.28247
G01 X16.61161 Y55.25409
G01 X16.71799 Y55.20007
G01 X16.75017 Y55.18059
G01 X16.82352 Y55.13108
G01 X16.87227 Y55.09456
G01 X16.94463 Y55.03141
G01 X17.00838 Y54.96999
G01 X17.01006 Y54.96822
G01 X17.10716 Y54.84818
G01 X17.12723 Y54.82245
G01 X17.15593 Y54.77436
G01 X17.21959 Y54.65978
G01 X17.23041 Y54.63637
G01 X17.26355 Y54.55425
G01 X17.28738 Y54.48562
G01 X17.30902 Y54.40416
G01 X17.32748 Y54.31757
G01 X17.32977 Y54.30360
G01 X17.34209 Y54.16141
G01 X17.34483 Y54.11716
G01 X17.34209 Y54.07294
G01 X17.33848 Y54.03119
G01 X17.32977 Y53.93078
G01 X17.32748 Y53.91678
G01 X17.30902 Y53.83019
G01 X17.28738 Y53.74874
G01 X17.26355 Y53.68011
G01 X17.23041 Y53.59799
G01 X17.21959 Y53.57457
G01 X17.15593 Y53.45999
G01 X17.12723 Y53.41191
G01 X17.10716 Y53.38618
G01 X17.01006 Y53.26614
G01 X17.00838 Y53.26436
G01 X16.94463 Y53.20294
G01 X16.87227 Y53.13977
G01 X16.82352 Y53.10327
G01 X16.75017 Y53.05374
G01 X16.71804 Y53.03429
G01 X16.61161 Y52.98026
G01 X16.55014 Y52.95189
G01 X16.53018 Y52.94551
G01 X16.38019 Y52.89967
G01 X16.37135 Y52.89700
G01 X16.29309 Y52.88374
G01 X16.18626 Y52.87043
G01 X16.13706 Y52.86802
G01 X16.04859 Y52.86802
G01 X15.99939 Y52.87043
G01 X15.89259 Y52.88374
G01 X15.81430 Y52.89700
G01 X15.80549 Y52.89964
G01 X15.65550 Y52.94551
G01 X15.63549 Y52.95189
G01 X15.57400 Y52.98026
G01 X15.47692 Y53.02956
G01 X15.46765 Y53.03426
G01 X15.43549 Y53.05377
G01 X15.36216 Y53.10325
G01 X15.31334 Y53.13980
G01 X15.24105 Y53.20292
G01 X15.17727 Y53.26436
G01 X15.17565 Y53.26611
G01 X15.07849 Y53.38618
G01 X15.05843 Y53.41193
G01 X15.02970 Y53.46004
G01 X14.96602 Y53.57457
G01 X14.95520 Y53.59804
G01 X14.92210 Y53.68011
G01 X14.89828 Y53.74879
G01 X14.87666 Y53.83019
G01 X14.85820 Y53.91671
G01 X14.85591 Y53.93073
G01 X14.84359 Y54.07287
G01 X14.84082 Y54.11719
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.52994 Y53.75996 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.52994 Y53.75996
G01 X10.53105 Y53.71468
G01 X10.53304 Y53.69514
G01 X10.55866 Y53.59819
G01 X10.60151 Y53.51409
G01 X10.60784 Y53.50551
G01 X10.66092 Y53.44074
G01 X10.73042 Y53.38415
G01 X10.73430 Y53.38130
G01 X10.77492 Y53.35923
G01 X10.81838 Y53.33848
G01 X10.91533 Y53.31285
G01 X10.93484 Y53.31087
G01 X10.98015 Y53.30975
G01 X12.98020 Y53.30975
G01 X13.02551 Y53.31087
G01 X13.04502 Y53.31285
G01 X13.14197 Y53.33848
G01 X13.22615 Y53.38138
G01 X13.29943 Y53.44074
G01 X13.35884 Y53.51407
G01 X13.40169 Y53.59817
G01 X13.42731 Y53.69514
G01 X13.42930 Y53.71465
G01 X13.43041 Y53.75996
G01 X13.43041 Y55.75999
G01 X13.42930 Y55.80532
G01 X13.42731 Y55.82483
G01 X13.40169 Y55.92178
G01 X13.37895 Y55.96908
G01 X13.35884 Y56.00591
G01 X13.31073 Y56.06646
G01 X13.29943 Y56.07924
G01 X13.22607 Y56.13865
G01 X13.20755 Y56.14904
G01 X13.14311 Y56.18099
G01 X13.14202 Y56.18147
G01 X13.10001 Y56.19400
G01 X13.04494 Y56.20715
G01 X13.02571 Y56.20908
G01 X12.98020 Y56.21023
G01 X10.98015 Y56.21023
G01 X10.93484 Y56.20911
G01 X10.91533 Y56.20713
G01 X10.81835 Y56.18150
G01 X10.73425 Y56.13865
G01 X10.66092 Y56.07924
G01 X10.60151 Y56.00591
G01 X10.55866 Y55.92181
G01 X10.53304 Y55.82483
G01 X10.53105 Y55.80532
G01 X10.52994 Y55.75999
G01 X10.52994 Y53.75996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.84018 Y53.44922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.84018 Y53.44922
G01 X8.00165 Y53.58059
G01 X8.15199 Y53.74155
G01 X8.20733 Y53.81998
G01 X8.05006 Y53.81998
G01 X7.98608 Y53.74201
G01 X7.91816 Y53.67409
G01 X7.84018 Y53.61010
G01 X7.84018 Y53.44922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.86997 Y56.24761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.86997 Y56.24761
G01 X6.94821 Y56.24761
G01 X7.14330 Y56.22841
G01 X7.23751 Y56.20967
G01 X7.42512 Y56.15275
G01 X7.51386 Y56.11599
G01 X7.68674 Y56.02359
G01 X7.76662 Y55.97022
G01 X7.91816 Y55.84586
G01 X7.98608 Y55.77794
G01 X8.05003 Y55.69999
G01 X8.20733 Y55.69999
G01 X8.15199 Y55.77843
G01 X7.98704 Y55.95503
G01 X7.90731 Y56.06951
G01 X7.87594 Y56.13194
G01 X7.84221 Y56.21879
G01 X7.82552 Y56.31043
G01 X7.82631 Y56.38498
G01 X7.41684 Y56.79445
G01 X6.86997 Y56.24761
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.59299 Y55.69999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.59299 Y55.69999
G01 X5.64836 Y55.77840
G01 X5.79870 Y55.93939
G01 X5.96954 Y56.07837
G01 X6.01262 Y56.10456
G01 X6.05288 Y56.07868
G01 X6.12487 Y56.04048
G01 X6.13744 Y56.03631
G01 X6.11364 Y56.02359
G01 X6.03376 Y55.97022
G01 X5.88222 Y55.84586
G01 X5.81430 Y55.77794
G01 X5.75034 Y55.69999
G01 X5.59299 Y55.69999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.59299 Y53.81998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.59299 Y53.81998
G01 X5.64836 Y53.74157
G01 X5.79870 Y53.58059
G01 X5.96017 Y53.44922
G01 X5.96017 Y53.61013
G01 X5.88222 Y53.67409
G01 X5.81430 Y53.74201
G01 X5.75032 Y53.81998
G01 X5.59299 Y53.81998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.65011 Y46.93900 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.65011 Y46.93900
G01 X7.58742 Y46.92028
G01 X7.54038 Y46.88164
G01 X7.47942 Y46.80740
G01 X7.45776 Y46.76686
G01 X7.45793 Y46.76615
G01 X7.45796 Y46.76615
G01 X7.50109 Y46.60374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.27323 Y45.73516 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.27323 Y45.73516
G01 X5.27887 Y45.65655
G01 X5.35748 Y45.73516
G01 X5.27887 Y45.81378
G01 X5.27323 Y45.73516
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.45793 Y44.70418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.45793 Y44.70418
G01 X7.44216 Y44.69122
G01 X7.36230 Y44.63786
G01 X7.22397 Y44.56392
G01 X7.19700 Y44.55274
G01 X7.13523 Y44.52717
G01 X6.98516 Y44.48162
G01 X6.89095 Y44.46290
G01 X6.73487 Y44.44751
G01 X6.72855 Y44.44751
G01 X6.60823 Y44.32719
G01 X6.68684 Y44.32158
G01 X6.88801 Y44.33595
G01 X7.08509 Y44.37885
G01 X7.27409 Y44.44934
G01 X7.33487 Y44.48251
G01 X7.46545 Y44.53123
G01 X7.53373 Y44.54609
G01 X7.58476 Y44.55218
G01 X7.71333 Y44.51530
G01 X7.73619 Y44.50908
G01 X7.77767 Y44.49834
G01 X7.82204 Y44.48802
G01 X7.84157 Y44.48607
G01 X7.88684 Y44.48493
G01 X9.48683 Y44.48493
G01 X9.53210 Y44.48607
G01 X9.55160 Y44.48802
G01 X9.64866 Y44.51368
G01 X9.73273 Y44.55653
G01 X9.80609 Y44.61594
G01 X9.86550 Y44.68927
G01 X9.90835 Y44.77339
G01 X9.93398 Y44.87032
G01 X9.93596 Y44.88985
G01 X9.93710 Y44.93519
G01 X9.93710 Y46.53519
G01 X9.93596 Y46.58050
G01 X9.93398 Y46.60003
G01 X9.90835 Y46.69696
G01 X9.87657 Y46.76132
G01 X9.86550 Y46.78106
G01 X9.86268 Y46.78492
G01 X9.80609 Y46.85444
G01 X9.73276 Y46.91383
G01 X9.64868 Y46.95665
G01 X9.55163 Y46.98233
G01 X9.53205 Y46.98429
G01 X9.48683 Y46.98543
G01 X7.88684 Y46.98543
G01 X7.84157 Y46.98429
G01 X7.82204 Y46.98233
G01 X7.77767 Y46.97202
G01 X7.65011 Y46.93900
G01 X7.58747 Y46.92030
G01 X7.58742 Y46.92028
G01 X7.58216 Y46.91870
G01 X7.57975 Y46.91878
G01 X7.48704 Y46.92985
G01 X7.39812 Y46.95833
G01 X7.37645 Y46.96762
G01 X7.33487 Y46.98784
G01 X7.27409 Y47.02101
G01 X7.25268 Y47.02901
G01 X7.08509 Y47.09150
G01 X6.88801 Y47.13440
G01 X6.68684 Y47.14878
G01 X6.60823 Y47.14316
G01 X6.72857 Y47.02279
G01 X6.73487 Y47.02279
G01 X6.89095 Y47.00742
G01 X6.98516 Y46.98870
G01 X7.13523 Y46.94316
G01 X7.22397 Y46.90641
G01 X7.36230 Y46.83247
G01 X7.44216 Y46.77910
G01 X7.45793 Y46.76615
G01 X7.50109 Y46.60374
G01 X7.52641 Y46.53519
G01 X7.52910 Y46.52777
G01 X7.58521 Y46.37095
G01 X7.60264 Y46.31362
G01 X7.64193 Y46.15680
G01 X7.65133 Y46.10969
G01 X7.67460 Y45.95287
G01 X7.67866 Y45.91169
G01 X7.68636 Y45.75485
G01 X7.68636 Y45.71550
G01 X7.67866 Y45.55866
G01 X7.67460 Y45.51749
G01 X7.65133 Y45.36067
G01 X7.64193 Y45.31355
G01 X7.60264 Y45.15673
G01 X7.58521 Y45.09940
G01 X7.52910 Y44.94258
G01 X7.52641 Y44.93519
G01 X7.50109 Y44.86661
G01 X7.45793 Y44.70418
G01 X7.45776 Y44.70347
G01 X7.47942 Y44.66293
G01 X7.54038 Y44.58868
G01 X7.58476 Y44.55218
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.52657 Y38.88499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.52657 Y38.88499
G01 X5.53218 Y38.96360
G01 X5.61082 Y38.88499
G01 X5.53218 Y38.80637
G01 X5.52657 Y38.88499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.23682 Y37.80780 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.23682 Y37.80780
G01 X8.23276 Y37.81275
G01 X8.18750 Y37.89746
G01 X8.15961 Y37.98938
G01 X8.15018 Y38.08496
G01 X8.15016 Y38.44305
G01 X8.17241 Y38.59317
G01 X8.18138 Y38.68395
G01 X8.18907 Y38.84077
G01 X8.18907 Y38.92918
G01 X8.18138 Y39.08600
G01 X8.17241 Y39.17681
G01 X8.15016 Y39.32687
G01 X8.14820 Y39.33337
G01 X8.11142 Y39.42210
G01 X8.03751 Y39.56042
G01 X7.98415 Y39.64028
G01 X7.88465 Y39.76152
G01 X7.81673 Y39.82944
G01 X7.69550 Y39.92893
G01 X7.61562 Y39.98229
G01 X7.47731 Y40.05623
G01 X7.38857 Y40.09299
G01 X7.23850 Y40.13850
G01 X7.14429 Y40.15725
G01 X6.98821 Y40.17262
G01 X6.98189 Y40.17262
G01 X6.86154 Y40.29296
G01 X6.94018 Y40.29860
G01 X7.14135 Y40.28420
G01 X7.33843 Y40.24132
G01 X7.52740 Y40.17084
G01 X7.70436 Y40.07422
G01 X7.72039 Y40.06223
G01 X7.83644 Y39.99776
G01 X7.86278 Y39.98753
G01 X7.89839 Y39.97366
G01 X7.98572 Y39.94871
G01 X8.07617 Y39.94031
G01 X8.16659 Y39.94874
G01 X8.23525 Y39.96164
G01 X8.23606 Y39.96192
G01 X8.35153 Y40.03736
G01 X8.47835 Y40.10650
G01 X8.57533 Y40.13213
G01 X8.59484 Y40.13411
G01 X8.64015 Y40.13523
G01 X10.24020 Y40.13523
G01 X10.28572 Y40.13408
G01 X10.30497 Y40.13215
G01 X10.35602 Y40.12009
G01 X10.40192 Y40.10652
G01 X10.48605 Y40.06365
G01 X10.50372 Y40.05049
G01 X10.55943 Y40.00426
G01 X10.61881 Y39.93093
G01 X10.63692 Y39.89799
G01 X10.66169 Y39.84676
G01 X10.68731 Y39.74983
G01 X10.68930 Y39.73032
G01 X10.69044 Y39.68501
G01 X10.69044 Y38.08496
G01 X10.68930 Y38.03965
G01 X10.68731 Y38.02014
G01 X10.66169 Y37.92317
G01 X10.61884 Y37.83907
G01 X10.55943 Y37.76574
G01 X10.48615 Y37.70638
G01 X10.40197 Y37.66348
G01 X10.30502 Y37.63785
G01 X10.28551 Y37.63587
G01 X10.24020 Y37.63472
G01 X8.64015 Y37.63472
G01 X8.59484 Y37.63587
G01 X8.57533 Y37.63785
G01 X8.47838 Y37.66348
G01 X8.35372 Y37.73119
G01 X8.35077 Y37.73310
G01 X8.34861 Y37.73452
G01 X8.24160 Y37.80442
G01 X8.23685 Y37.80777
G01 X8.23682 Y37.80780
G01 X8.23629 Y37.80818
G01 X8.17701 Y37.82019
G01 X8.08668 Y37.82992
G01 X7.99613 Y37.82281
G01 X7.90845 Y37.79911
G01 X7.84297 Y37.77470
G01 X7.72039 Y37.70775
G01 X7.70436 Y37.69576
G01 X7.52740 Y37.59914
G01 X7.33843 Y37.52865
G01 X7.14135 Y37.48578
G01 X6.94018 Y37.47138
G01 X6.86154 Y37.47701
G01 X6.98189 Y37.59733
G01 X6.98821 Y37.59733
G01 X7.14429 Y37.61270
G01 X7.23850 Y37.63145
G01 X7.38857 Y37.67696
G01 X7.47731 Y37.71372
G01 X7.61562 Y37.78766
G01 X7.69550 Y37.84102
G01 X7.81673 Y37.94051
G01 X7.88465 Y38.00843
G01 X7.98415 Y38.12967
G01 X8.03751 Y38.20953
G01 X8.11142 Y38.34785
G01 X8.14820 Y38.43658
G01 X8.15016 Y38.44305
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.15016 Y39.32687 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.15016 Y39.32687
G01 X8.15018 Y39.68499
G01 X8.15961 Y39.78057
G01 X8.18750 Y39.87249
G01 X8.23276 Y39.95720
G01 X8.23731 Y39.96273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.97019 Y46.81235 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.97019 Y46.81235
G01 X14.97425 Y46.80740
G01 X15.01956 Y46.72269
G01 X15.04743 Y46.63077
G01 X15.05685 Y46.53516
G01 X15.05683 Y46.17690
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.59622 Y45.73516 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.59622 Y45.73516
G01 X17.67483 Y45.65655
G01 X17.68044 Y45.73516
G01 X17.67483 Y45.81380
G01 X17.59622 Y45.73516
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.05683 Y45.29341 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.05683 Y45.29341
G01 X15.05685 Y44.93517
G01 X15.04743 Y44.83956
G01 X15.01956 Y44.74764
G01 X14.97425 Y44.66293
G01 X14.96986 Y44.65754
G01 X14.97092 Y44.65825
G01 X14.97176 Y44.65853
G01 X15.04042 Y44.67144
G01 X15.13092 Y44.67987
G01 X15.22139 Y44.67144
G01 X15.30877 Y44.64644
G01 X15.37072 Y44.62231
G01 X15.48649 Y44.55803
G01 X15.50257 Y44.54599
G01 X15.67961 Y44.44934
G01 X15.86861 Y44.37885
G01 X16.06566 Y44.33595
G01 X16.26686 Y44.32158
G01 X16.34547 Y44.32719
G01 X16.22512 Y44.44751
G01 X16.21883 Y44.44751
G01 X16.06272 Y44.46290
G01 X15.96853 Y44.48162
G01 X15.81847 Y44.52717
G01 X15.72972 Y44.56392
G01 X15.59142 Y44.63786
G01 X15.51154 Y44.69122
G01 X15.39030 Y44.79069
G01 X15.32238 Y44.85864
G01 X15.22289 Y44.97984
G01 X15.16953 Y45.05973
G01 X15.09561 Y45.19803
G01 X15.05883 Y45.28678
G01 X15.05683 Y45.29341
G01 X15.03460 Y45.44332
G01 X15.02563 Y45.53415
G01 X15.01794 Y45.69097
G01 X15.01794 Y45.77939
G01 X15.02563 Y45.93621
G01 X15.03460 Y46.02704
G01 X15.05683 Y46.17690
G01 X15.05883 Y46.18355
G01 X15.09561 Y46.27230
G01 X15.16953 Y46.41060
G01 X15.22289 Y46.49048
G01 X15.32238 Y46.61169
G01 X15.39030 Y46.67961
G01 X15.42066 Y46.70456
G01 X15.51154 Y46.77910
G01 X15.59142 Y46.83247
G01 X15.72972 Y46.90641
G01 X15.81847 Y46.94316
G01 X15.96853 Y46.98870
G01 X16.06272 Y47.00742
G01 X16.21883 Y47.02279
G01 X16.22507 Y47.02279
G01 X16.34547 Y47.14316
G01 X16.26686 Y47.14878
G01 X16.06566 Y47.13440
G01 X15.86861 Y47.09150
G01 X15.67961 Y47.02101
G01 X15.50257 Y46.92437
G01 X15.48649 Y46.91233
G01 X15.36401 Y46.84547
G01 X15.29856 Y46.82107
G01 X15.21093 Y46.79739
G01 X15.12043 Y46.79025
G01 X15.03018 Y46.79996
G01 X14.97075 Y46.81197
G01 X14.97019 Y46.81235
G01 X14.96554 Y46.81560
G01 X14.85505 Y46.88782
G01 X14.84537 Y46.89406
G01 X14.72866 Y46.95668
G01 X14.63163 Y46.98233
G01 X14.61205 Y46.98429
G01 X14.56686 Y46.98543
G01 X12.96686 Y46.98543
G01 X12.92157 Y46.98429
G01 X12.90207 Y46.98233
G01 X12.80501 Y46.95668
G01 X12.72094 Y46.91383
G01 X12.64759 Y46.85442
G01 X12.58817 Y46.78106
G01 X12.54535 Y46.69696
G01 X12.51970 Y46.60003
G01 X12.51774 Y46.58050
G01 X12.51660 Y46.53519
G01 X12.51660 Y44.93519
G01 X12.51774 Y44.88985
G01 X12.51970 Y44.87034
G01 X12.53552 Y44.80565
G01 X12.54535 Y44.77334
G01 X12.54586 Y44.77222
G01 X12.58817 Y44.68929
G01 X12.64761 Y44.61591
G01 X12.66506 Y44.60060
G01 X12.72091 Y44.55655
G01 X12.76158 Y44.53443
G01 X12.80504 Y44.51368
G01 X12.90207 Y44.48802
G01 X12.92157 Y44.48607
G01 X12.96686 Y44.48493
G01 X14.56686 Y44.48493
G01 X14.61210 Y44.48607
G01 X14.63160 Y44.48802
G01 X14.72866 Y44.51368
G01 X14.85309 Y44.58124
G01 X14.85497 Y44.58249
G01 X14.96983 Y44.65752
G01 X14.96986 Y44.65754
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.96539 Y39.96555 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.96539 Y39.96555
G01 X14.85497 Y40.03769
G01 X14.85309 Y40.03893
G01 X14.72866 Y40.10650
G01 X14.63163 Y40.13215
G01 X14.61238 Y40.13408
G01 X14.56686 Y40.13523
G01 X12.96686 Y40.13523
G01 X12.92150 Y40.13411
G01 X12.90199 Y40.13213
G01 X12.80501 Y40.10650
G01 X12.72094 Y40.06365
G01 X12.64759 Y40.00424
G01 X12.58817 Y39.93088
G01 X12.54535 Y39.84681
G01 X12.51970 Y39.74983
G01 X12.51774 Y39.73032
G01 X12.51660 Y39.68501
G01 X12.51660 Y38.08496
G01 X12.51774 Y38.03968
G01 X12.51970 Y38.02022
G01 X12.52155 Y38.01148
G01 X12.54532 Y37.92322
G01 X12.58815 Y37.83914
G01 X12.64761 Y37.76574
G01 X12.71713 Y37.70912
G01 X12.72097 Y37.70633
G01 X12.76003 Y37.68502
G01 X12.80504 Y37.66348
G01 X12.90199 Y37.63785
G01 X12.92150 Y37.63587
G01 X12.96686 Y37.63472
G01 X14.56686 Y37.63472
G01 X14.61217 Y37.63587
G01 X14.63168 Y37.63785
G01 X14.72866 Y37.66348
G01 X14.85309 Y37.73104
G01 X14.85497 Y37.73228
G01 X14.96981 Y37.80732
G01 X14.97092 Y37.80805
G01 X14.97176 Y37.80833
G01 X15.04042 Y37.82124
G01 X15.13082 Y37.82967
G01 X15.22129 Y37.82126
G01 X15.30862 Y37.79632
G01 X15.37057 Y37.77221
G01 X15.48662 Y37.70775
G01 X15.50265 Y37.69576
G01 X15.67961 Y37.59914
G01 X15.86856 Y37.52865
G01 X16.06566 Y37.48578
G01 X16.26683 Y37.47138
G01 X16.34544 Y37.47701
G01 X16.22512 Y37.59733
G01 X16.21883 Y37.59733
G01 X16.06272 Y37.61270
G01 X15.96853 Y37.63145
G01 X15.81847 Y37.67696
G01 X15.72972 Y37.71372
G01 X15.59142 Y37.78766
G01 X15.51154 Y37.84102
G01 X15.39030 Y37.94051
G01 X15.32238 Y38.00843
G01 X15.22289 Y38.12967
G01 X15.16953 Y38.20953
G01 X15.09561 Y38.34785
G01 X15.05883 Y38.43658
G01 X15.05683 Y38.44323
G01 X15.03460 Y38.59317
G01 X15.02563 Y38.68395
G01 X15.01794 Y38.84077
G01 X15.01794 Y38.92918
G01 X15.02563 Y39.08600
G01 X15.03460 Y39.17681
G01 X15.05683 Y39.32669
G01 X15.05883 Y39.33337
G01 X15.09561 Y39.42210
G01 X15.16953 Y39.56042
G01 X15.22289 Y39.64028
G01 X15.32238 Y39.76152
G01 X15.39030 Y39.82944
G01 X15.51154 Y39.92893
G01 X15.59142 Y39.98229
G01 X15.72972 Y40.05623
G01 X15.81847 Y40.09299
G01 X15.96853 Y40.13850
G01 X16.06272 Y40.15725
G01 X16.21883 Y40.17262
G01 X16.22512 Y40.17262
G01 X16.34547 Y40.29296
G01 X16.26683 Y40.29860
G01 X16.06566 Y40.28420
G01 X15.86856 Y40.24132
G01 X15.67961 Y40.17084
G01 X15.50265 Y40.07422
G01 X15.48662 Y40.06223
G01 X15.36401 Y39.99527
G01 X15.29856 Y39.97086
G01 X15.21085 Y39.94716
G01 X15.12030 Y39.94005
G01 X15.03000 Y39.94978
G01 X14.97069 Y39.96179
G01 X14.97021 Y39.96213
G01 X14.96539 Y39.96555
G01 X14.97019 Y39.96218
G01 X14.97021 Y39.96213
G01 X14.97425 Y39.95720
G01 X15.01956 Y39.87249
G01 X15.04743 Y39.78057
G01 X15.05685 Y39.68499
G01 X15.05683 Y39.32669
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.05683 Y38.44323 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.05683 Y38.44323
G01 X15.05685 Y38.08496
G01 X15.04743 Y37.98938
G01 X15.01956 Y37.89746
G01 X14.97425 Y37.81275
G01 X14.96981 Y37.80732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.59622 Y38.88499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.59622 Y38.88499
G01 X17.67483 Y38.96360
G01 X17.68044 Y38.88499
G01 X17.67483 Y38.80637
G01 X17.59622 Y38.88499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.28191 Y48.19302 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.28191 Y48.19302
G01 X32.28306 Y48.14771
G01 X32.28504 Y48.12817
G01 X32.31066 Y48.03122
G01 X32.35351 Y47.94712
G01 X32.41290 Y47.87379
G01 X32.48064 Y47.81852
G01 X32.48628 Y47.81438
G01 X32.52700 Y47.79223
G01 X32.57035 Y47.77153
G01 X32.66738 Y47.74588
G01 X32.68692 Y47.74392
G01 X32.73218 Y47.74278
G01 X35.93220 Y47.74278
G01 X35.97743 Y47.74392
G01 X35.99697 Y47.74588
G01 X36.09397 Y47.77153
G01 X36.17807 Y47.81438
G01 X36.25145 Y47.87379
G01 X36.31081 Y47.94707
G01 X36.35368 Y48.03125
G01 X36.37931 Y48.12817
G01 X36.38129 Y48.14771
G01 X36.38244 Y48.19302
G01 X36.38244 Y51.39301
G01 X36.38129 Y51.43835
G01 X36.37931 Y51.45789
G01 X36.35368 Y51.55481
G01 X36.31086 Y51.63889
G01 X36.30802 Y51.64277
G01 X36.25142 Y51.71227
G01 X36.20266 Y51.75316
G01 X36.17804 Y51.77168
G01 X36.09514 Y51.81402
G01 X36.09399 Y51.81450
G01 X35.99697 Y51.84018
G01 X35.97738 Y51.84214
G01 X35.93220 Y51.84328
G01 X32.73218 Y51.84328
G01 X32.68692 Y51.84214
G01 X32.66741 Y51.84018
G01 X32.57035 Y51.81453
G01 X32.48626 Y51.77168
G01 X32.41293 Y51.71227
G01 X32.35351 Y51.63894
G01 X32.31066 Y51.55484
G01 X32.28504 Y51.45786
G01 X32.28306 Y51.43835
G01 X32.28191 Y51.39301
G01 X32.28191 Y48.19302
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.01592 Y40.70198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.01592 Y40.70198
G01 X32.01707 Y40.65674
G01 X32.01902 Y40.63716
G01 X32.04468 Y40.54018
G01 X32.08755 Y40.45608
G01 X32.09258 Y40.44922
G01 X32.14694 Y40.38272
G01 X32.18476 Y40.35052
G01 X32.22024 Y40.32336
G01 X32.26093 Y40.30124
G01 X32.30439 Y40.28049
G01 X32.40139 Y40.25483
G01 X32.42093 Y40.25288
G01 X32.46619 Y40.25174
G01 X34.16619 Y40.25174
G01 X34.21142 Y40.25288
G01 X34.23096 Y40.25483
G01 X34.32796 Y40.28049
G01 X34.41208 Y40.32334
G01 X34.48541 Y40.38275
G01 X34.54482 Y40.45610
G01 X34.58767 Y40.54018
G01 X34.61333 Y40.63721
G01 X34.61528 Y40.65674
G01 X34.61643 Y40.70198
G01 X34.61643 Y42.40197
G01 X34.61528 Y42.44724
G01 X34.61333 Y42.46677
G01 X34.58767 Y42.56380
G01 X34.56413 Y42.61267
G01 X34.54482 Y42.64787
G01 X34.50355 Y42.70047
G01 X34.48539 Y42.72125
G01 X34.42275 Y42.77276
G01 X34.41211 Y42.78061
G01 X34.32801 Y42.82346
G01 X34.26657 Y42.84106
G01 X34.23096 Y42.84914
G01 X34.21140 Y42.85110
G01 X34.16619 Y42.85224
G01 X32.46619 Y42.85224
G01 X32.42090 Y42.85110
G01 X32.40139 Y42.84914
G01 X32.30439 Y42.82349
G01 X32.22027 Y42.78064
G01 X32.14694 Y42.72123
G01 X32.08753 Y42.64790
G01 X32.04468 Y42.56377
G01 X32.01902 Y42.46677
G01 X32.01707 Y42.44724
G01 X32.01592 Y42.40197
G01 X32.01592 Y40.70198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.88892 Y35.74898 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.88892 Y35.74898
G01 X31.89007 Y35.70374
G01 X31.89202 Y35.68418
G01 X31.90724 Y35.62160
G01 X31.91768 Y35.58720
G01 X31.96050 Y35.50313
G01 X31.97904 Y35.47852
G01 X32.01994 Y35.42972
G01 X32.09327 Y35.37036
G01 X32.13393 Y35.34824
G01 X32.17739 Y35.32749
G01 X32.27439 Y35.30183
G01 X32.29393 Y35.29988
G01 X32.33919 Y35.29874
G01 X34.03919 Y35.29874
G01 X34.08442 Y35.29988
G01 X34.10396 Y35.30183
G01 X34.20096 Y35.32749
G01 X34.28508 Y35.37034
G01 X34.35841 Y35.42975
G01 X34.41782 Y35.50308
G01 X34.46067 Y35.58720
G01 X34.48633 Y35.68421
G01 X34.48828 Y35.70374
G01 X34.48943 Y35.74898
G01 X34.48943 Y37.44897
G01 X34.48828 Y37.49424
G01 X34.48633 Y37.51377
G01 X34.46067 Y37.61077
G01 X34.43992 Y37.65423
G01 X34.41780 Y37.69492
G01 X34.40825 Y37.70780
G01 X34.35841 Y37.76825
G01 X34.28513 Y37.82759
G01 X34.20213 Y37.86998
G01 X34.20096 Y37.87049
G01 X34.15757 Y37.88339
G01 X34.10398 Y37.89614
G01 X34.08440 Y37.89810
G01 X34.03919 Y37.89924
G01 X32.33919 Y37.89924
G01 X32.29390 Y37.89810
G01 X32.27439 Y37.89614
G01 X32.17739 Y37.87049
G01 X32.09327 Y37.82764
G01 X32.01994 Y37.76823
G01 X31.96053 Y37.69490
G01 X31.91768 Y37.61077
G01 X31.89202 Y37.51377
G01 X31.89007 Y37.49424
G01 X31.88892 Y37.44897
G01 X31.88892 Y35.74898
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.13425 Y30.75904 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.13425 Y30.75904
G01 X38.13539 Y30.71378
G01 X38.13735 Y30.69422
G01 X38.16298 Y30.59730
G01 X38.16343 Y30.59626
G01 X38.20590 Y30.51307
G01 X38.22439 Y30.48848
G01 X38.26524 Y30.43979
G01 X38.33473 Y30.38320
G01 X38.33854 Y30.38041
G01 X38.37933 Y30.35823
G01 X38.42269 Y30.33753
G01 X38.51969 Y30.31188
G01 X38.53925 Y30.30992
G01 X38.58449 Y30.30878
G01 X40.58449 Y30.30878
G01 X40.62975 Y30.30992
G01 X40.64931 Y30.31188
G01 X40.74628 Y30.33753
G01 X40.83038 Y30.38038
G01 X40.90376 Y30.43979
G01 X40.96315 Y30.51312
G01 X41.00600 Y30.59722
G01 X41.03165 Y30.69425
G01 X41.03361 Y30.71378
G01 X41.03475 Y30.75904
G01 X41.03475 Y32.75902
G01 X41.03361 Y32.80428
G01 X41.03165 Y32.82379
G01 X41.00597 Y32.92084
G01 X40.97234 Y32.98861
G01 X40.96315 Y33.00491
G01 X40.92149 Y33.05795
G01 X40.90376 Y33.07827
G01 X40.83496 Y33.13435
G01 X40.83038 Y33.13768
G01 X40.74745 Y33.18002
G01 X40.74631 Y33.18050
G01 X40.64928 Y33.20618
G01 X40.62970 Y33.20814
G01 X40.58449 Y33.20928
G01 X38.58449 Y33.20928
G01 X38.53923 Y33.20814
G01 X38.51972 Y33.20618
G01 X38.42272 Y33.18053
G01 X38.33859 Y33.13768
G01 X38.26526 Y33.07827
G01 X38.20585 Y33.00491
G01 X38.16300 Y32.92084
G01 X38.13735 Y32.82381
G01 X38.13539 Y32.80428
G01 X38.13425 Y32.75902
G01 X38.13425 Y30.75904
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.32446 Y33.34842 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.32446 Y33.34842
G01 X44.47437 Y33.36902
G01 X44.69464 Y33.36902
G01 X44.84452 Y33.34842
G01 X44.73287 Y33.23676
G01 X44.63254 Y33.24664
G01 X44.53647 Y33.24664
G01 X44.43612 Y33.23676
G01 X44.32446 Y33.34842
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.97074 Y31.75902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.97074 Y31.75902
G01 X42.98578 Y31.97878
G01 X42.99431 Y32.01985
G01 X43.10676 Y31.90740
G01 X43.09688 Y31.80705
G01 X43.09688 Y31.71099
G01 X43.10676 Y31.61063
G01 X42.99431 Y31.49821
G01 X42.98578 Y31.53928
G01 X42.97074 Y31.75902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.32446 Y30.16964 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.32446 Y30.16964
G01 X44.47437 Y30.14904
G01 X44.69464 Y30.14904
G01 X44.84452 Y30.16964
G01 X44.73289 Y30.28125
G01 X44.63254 Y30.27136
G01 X44.53647 Y30.27136
G01 X44.43609 Y30.28127
G01 X44.32446 Y30.16964
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.06225 Y31.90743 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.06225 Y31.90743
G01 X46.17470 Y32.01988
G01 X46.18323 Y31.97875
G01 X46.19827 Y31.75902
G01 X46.18323 Y31.53931
G01 X46.17470 Y31.49818
G01 X46.06228 Y31.61061
G01 X46.07216 Y31.71099
G01 X46.07216 Y31.80705
G01 X46.06225 Y31.90743
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.19361 Y32.94502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.19361 Y32.94502
G01 X48.35506 Y32.94502
G01 X48.36103 Y32.93776
G01 X48.42895 Y32.86984
G01 X48.43616 Y32.86392
G01 X48.43616 Y32.70247
G01 X48.38480 Y32.74093
G01 X48.23207 Y32.89366
G01 X48.19361 Y32.94502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.31619 Y32.70250 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.31619 Y32.70250
G01 X50.31619 Y32.86389
G01 X50.32343 Y32.86984
G01 X50.39135 Y32.93776
G01 X50.39732 Y32.94502
G01 X50.55871 Y32.94502
G01 X50.52028 Y32.89369
G01 X50.36752 Y32.74093
G01 X50.31619 Y32.70250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.59361 Y32.94502 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.59361 Y32.94502
G01 X51.63206 Y32.89366
G01 X51.78479 Y32.74093
G01 X51.83618 Y32.70247
G01 X51.83618 Y32.86389
G01 X51.82894 Y32.86984
G01 X51.76102 Y32.93776
G01 X51.75505 Y32.94502
G01 X51.59361 Y32.94502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.35881 Y30.66626 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.35881 Y30.66626
G01 X52.34697 Y30.68650
G01 X52.32195 Y30.72694
G01 X52.31037 Y30.74467
G01 X52.27633 Y30.80098
G01 X52.23917 Y30.86786
G01 X52.22256 Y30.89778
G01 X52.19330 Y30.94670
G01 X52.17377 Y30.97172
G01 X52.06668 Y31.10408
G01 X52.06244 Y31.10860
G01 X51.99869 Y31.17002
G01 X51.91792 Y31.24053
G01 X51.86226 Y31.28221
G01 X51.78904 Y31.33161
G01 X51.75132 Y31.35447
G01 X51.63326 Y31.41442
G01 X51.57009 Y31.44347
G01 X51.55190 Y31.44924
G01 X51.38319 Y31.50088
G01 X51.37695 Y31.50276
G01 X51.29592 Y31.51663
G01 X51.17707 Y31.53141
G01 X51.12036 Y31.53418
G01 X51.03199 Y31.53418
G01 X50.97527 Y31.53141
G01 X50.85642 Y31.51663
G01 X50.77540 Y31.50276
G01 X50.76915 Y31.50088
G01 X50.60044 Y31.44924
G01 X50.58228 Y31.44347
G01 X50.51906 Y31.41439
G01 X50.40103 Y31.35445
G01 X50.36331 Y31.33159
G01 X50.28998 Y31.28211
G01 X50.23445 Y31.24053
G01 X50.15368 Y31.17002
G01 X50.08988 Y31.10855
G01 X50.08566 Y31.10408
G01 X49.97855 Y30.97169
G01 X49.95902 Y30.94667
G01 X49.92983 Y30.89783
G01 X49.85935 Y30.77101
G01 X49.84619 Y30.74248
G01 X49.81304 Y30.66034
G01 X49.78617 Y30.58292
G01 X49.76189 Y30.49151
G01 X49.74342 Y30.40494
G01 X49.74040 Y30.38638
G01 X49.72678 Y30.22928
G01 X49.72402 Y30.18503
G01 X49.72678 Y30.14073
G01 X49.74040 Y29.98368
G01 X49.74342 Y29.96512
G01 X49.76189 Y29.87855
G01 X49.78617 Y29.78714
G01 X49.81304 Y29.70972
G01 X49.84619 Y29.62758
G01 X49.85932 Y29.59910
G01 X49.92983 Y29.47223
G01 X49.95904 Y29.42336
G01 X49.97852 Y29.39839
G01 X50.08564 Y29.26598
G01 X50.08985 Y29.26151
G01 X50.15373 Y29.19997
G01 X50.23450 Y29.12948
G01 X50.29000 Y29.08793
G01 X50.36326 Y29.03847
G01 X50.40100 Y29.01561
G01 X50.51901 Y28.95567
G01 X50.58226 Y28.92656
G01 X50.60049 Y28.92077
G01 X50.76920 Y28.86918
G01 X50.77540 Y28.86730
G01 X50.85637 Y28.85346
G01 X50.97530 Y28.83865
G01 X51.03194 Y28.83586
G01 X51.12043 Y28.83586
G01 X51.17707 Y28.83863
G01 X51.29597 Y28.85346
G01 X51.37692 Y28.86730
G01 X51.38314 Y28.86918
G01 X51.55185 Y28.92077
G01 X51.57009 Y28.92656
G01 X51.63328 Y28.95567
G01 X51.75134 Y29.01561
G01 X51.78909 Y29.03847
G01 X51.86239 Y29.08795
G01 X51.91792 Y29.12953
G01 X51.99866 Y29.19999
G01 X52.04834 Y29.24680
G01 X52.06247 Y29.26146
G01 X52.06668 Y29.26596
G01 X52.17380 Y29.39837
G01 X52.19330 Y29.42336
G01 X52.22256 Y29.47228
G01 X52.27633 Y29.56905
G01 X52.31037 Y29.62539
G01 X52.34649 Y29.68061
G01 X52.36082 Y29.70319
G01 X52.38464 Y29.74185
G01 X52.39358 Y29.75442
G01 X52.39467 Y29.75595
G01 X52.45449 Y29.80299
G01 X52.53732 Y29.84566
G01 X52.62670 Y29.87190
G01 X52.69531 Y29.88511
G01 X52.78799 Y29.89395
G01 X52.88068 Y29.88508
G01 X52.97001 Y29.85887
G01 X53.03488 Y29.83291
G01 X53.13699 Y29.77716
G01 X53.14885 Y29.76639
G01 X53.19353 Y29.70380
G01 X53.20537 Y29.68356
G01 X53.23038 Y29.64312
G01 X53.24202 Y29.62534
G01 X53.27600 Y29.56905
G01 X53.32983 Y29.47223
G01 X53.35904 Y29.42339
G01 X53.37852 Y29.39839
G01 X53.48565 Y29.26596
G01 X53.48985 Y29.26151
G01 X53.55373 Y29.19997
G01 X53.63450 Y29.12948
G01 X53.69000 Y29.08793
G01 X53.76328 Y29.03847
G01 X53.80100 Y29.01561
G01 X53.91905 Y28.95564
G01 X53.98225 Y28.92659
G01 X54.00051 Y28.92077
G01 X54.16922 Y28.86918
G01 X54.17542 Y28.86730
G01 X54.25637 Y28.85346
G01 X54.37529 Y28.83865
G01 X54.43191 Y28.83586
G01 X54.52042 Y28.83586
G01 X54.57707 Y28.83863
G01 X54.69596 Y28.85346
G01 X54.77691 Y28.86730
G01 X54.78314 Y28.86918
G01 X54.95184 Y28.92077
G01 X54.97008 Y28.92659
G01 X55.03330 Y28.95567
G01 X55.15136 Y29.01561
G01 X55.18908 Y29.03847
G01 X55.26238 Y29.08795
G01 X55.31791 Y29.12951
G01 X55.39866 Y29.19999
G01 X55.44834 Y29.24680
G01 X55.46246 Y29.26146
G01 X55.46668 Y29.26596
G01 X55.57379 Y29.39837
G01 X55.59330 Y29.42336
G01 X55.62256 Y29.47228
G01 X55.69299 Y29.59905
G01 X55.70617 Y29.62763
G01 X55.73927 Y29.70964
G01 X55.76617 Y29.78711
G01 X55.79045 Y29.87850
G01 X55.80894 Y29.96517
G01 X55.81196 Y29.98368
G01 X55.82558 Y30.14081
G01 X55.82832 Y30.18506
G01 X55.82776 Y30.19745
G01 X55.82558 Y30.22923
G01 X55.81196 Y30.38640
G01 X55.80894 Y30.40487
G01 X55.79045 Y30.49156
G01 X55.76619 Y30.58292
G01 X55.73927 Y30.66042
G01 X55.70617 Y30.74243
G01 X55.69299 Y30.77101
G01 X55.62256 Y30.89778
G01 X55.59332 Y30.94670
G01 X55.57376 Y30.97172
G01 X55.46668 Y31.10408
G01 X55.46243 Y31.10860
G01 X55.39868 Y31.17002
G01 X55.31788 Y31.24053
G01 X55.26231 Y31.28218
G01 X55.18903 Y31.33161
G01 X55.15136 Y31.35445
G01 X55.03325 Y31.41442
G01 X54.97486 Y31.44147
G01 X54.95240 Y31.45092
G01 X54.85677 Y31.49783
G01 X54.82329 Y31.50080
G01 X54.78446 Y31.50504
G01 X54.70140 Y31.51591
G01 X54.57707 Y31.53141
G01 X54.52035 Y31.53418
G01 X54.43198 Y31.53418
G01 X54.37526 Y31.53141
G01 X54.25644 Y31.51663
G01 X54.17539 Y31.50276
G01 X54.16917 Y31.50088
G01 X54.00046 Y31.44924
G01 X53.98227 Y31.44347
G01 X53.91911 Y31.41442
G01 X53.80102 Y31.35445
G01 X53.76333 Y31.33161
G01 X53.68997 Y31.28211
G01 X53.63445 Y31.24053
G01 X53.55368 Y31.17002
G01 X53.48987 Y31.10855
G01 X53.48565 Y31.10408
G01 X53.37854 Y30.97169
G01 X53.35904 Y30.94667
G01 X53.32983 Y30.89783
G01 X53.27600 Y30.80101
G01 X53.24202 Y30.74472
G01 X53.20585 Y30.68945
G01 X53.19152 Y30.66687
G01 X53.16770 Y30.62821
G01 X53.15883 Y30.61574
G01 X53.15766 Y30.61411
G01 X53.09790 Y30.56710
G01 X53.01514 Y30.52445
G01 X52.92579 Y30.49819
G01 X52.85718 Y30.48495
G01 X52.76440 Y30.47609
G01 X52.67161 Y30.48495
G01 X52.58218 Y30.51122
G01 X52.51730 Y30.53720
G01 X52.41527 Y30.59293
G01 X52.40351 Y30.60362
G01 X52.39257 Y30.61894
G01 X52.35881 Y30.66626
G01 X52.39257 Y30.61896
G01 X52.39257 Y30.61894
G01 X52.42780 Y30.50283
G01 X52.44654 Y30.40863
G01 X52.46384 Y30.23304
G01 X52.46384 Y30.13697
G01 X52.44654 Y29.96141
G01 X52.42780 Y29.86720
G01 X52.39358 Y29.75442
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.19353 Y29.70380 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.19353 Y29.70380
G01 X53.15982 Y29.75102
G01 X53.12457 Y29.86720
G01 X53.10585 Y29.96141
G01 X53.08855 Y30.13697
G01 X53.08855 Y30.23304
G01 X53.10585 Y30.40863
G01 X53.12457 Y30.50283
G01 X53.15883 Y30.61574
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.86401 Y32.79894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.86401 Y32.79894
G01 X54.79106 Y32.93562
G01 X54.78619 Y32.98502
G01 X54.78619 Y33.16785
G01 X54.15962 Y33.79437
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.23604 Y28.61368 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.23604 Y28.61368
G01 X59.23665 Y28.60444
G01 X59.24549 Y28.57144
G01 X59.25438 Y28.55603
G01 X59.26697 Y28.54343
G01 X59.28242 Y28.53451
G01 X59.29961 Y28.52992
G01 X59.31744 Y28.52992
G01 X59.33464 Y28.53451
G01 X59.35008 Y28.54343
G01 X59.36271 Y28.55605
G01 X59.37162 Y28.57150
G01 X59.38041 Y28.60434
G01 X59.38102 Y28.61361
G01 X59.38102 Y30.39224
G01 X59.39044 Y30.48785
G01 X59.41833 Y30.57977
G01 X59.46360 Y30.66448
G01 X59.52453 Y30.73875
G01 X59.59880 Y30.79968
G01 X59.68351 Y30.84495
G01 X59.77543 Y30.87284
G01 X59.87104 Y30.88226
G01 X61.31746 Y30.88226
G01 X61.41305 Y30.87284
G01 X61.50497 Y30.84495
G01 X61.58968 Y30.79968
G01 X61.66395 Y30.73875
G01 X61.72488 Y30.66448
G01 X61.77014 Y30.57977
G01 X61.79803 Y30.48785
G01 X61.80746 Y30.39224
G01 X61.80746 Y28.61368
G01 X61.80807 Y28.60444
G01 X61.81688 Y28.57150
G01 X61.82580 Y28.55605
G01 X61.83842 Y28.54343
G01 X61.85384 Y28.53451
G01 X61.87103 Y28.52992
G01 X61.88889 Y28.52992
G01 X61.90608 Y28.53451
G01 X61.92150 Y28.54343
G01 X61.93410 Y28.55603
G01 X61.94304 Y28.57150
G01 X61.95186 Y28.60444
G01 X61.95246 Y28.61368
G01 X61.95246 Y33.08152
G01 X61.95186 Y33.09076
G01 X61.94304 Y33.12371
G01 X61.93410 Y33.13918
G01 X61.92150 Y33.15178
G01 X61.90608 Y33.16069
G01 X61.88889 Y33.16529
G01 X61.87103 Y33.16529
G01 X61.85384 Y33.16069
G01 X61.83842 Y33.15178
G01 X61.82580 Y33.13915
G01 X61.81688 Y33.12371
G01 X61.80807 Y33.09076
G01 X61.80746 Y33.08152
G01 X61.80746 Y31.51723
G01 X61.79803 Y31.42165
G01 X61.77014 Y31.32973
G01 X61.72488 Y31.24502
G01 X61.66395 Y31.17075
G01 X61.58968 Y31.10982
G01 X61.50497 Y31.06456
G01 X61.41305 Y31.03667
G01 X61.31746 Y31.02724
G01 X59.87104 Y31.02724
G01 X59.77543 Y31.03667
G01 X59.68351 Y31.06456
G01 X59.59880 Y31.10982
G01 X59.52453 Y31.17075
G01 X59.46360 Y31.24502
G01 X59.41833 Y31.32973
G01 X59.39044 Y31.42165
G01 X59.38102 Y31.51723
G01 X59.38102 Y33.08160
G01 X59.38041 Y33.09087
G01 X59.37162 Y33.12371
G01 X59.36271 Y33.13915
G01 X59.35008 Y33.15178
G01 X59.33464 Y33.16069
G01 X59.31744 Y33.16529
G01 X59.29961 Y33.16529
G01 X59.28242 Y33.16069
G01 X59.26697 Y33.15178
G01 X59.25438 Y33.13918
G01 X59.24549 Y33.12376
G01 X59.23665 Y33.09076
G01 X59.23604 Y33.08152
G01 X59.23604 Y28.61368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.38421 Y31.27235 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.38421 Y31.27235
G01 X63.39549 Y31.04302
G01 X63.40314 Y30.96567
G01 X63.43715 Y30.73629
G01 X63.45439 Y30.64993
G01 X63.45744 Y30.63773
G01 X63.54703 Y30.46750
G01 X63.56006 Y30.44637
G01 X63.61022 Y30.37337
G01 X63.67555 Y30.28757
G01 X63.75571 Y30.19605
G01 X63.81723 Y30.13240
G01 X63.82526 Y30.12486
G01 X63.99437 Y29.98668
G01 X63.99663 Y29.98483
G01 X64.06900 Y29.93885
G01 X64.18665 Y29.87170
G01 X64.27131 Y29.83078
G01 X64.35231 Y29.79638
G01 X64.38909 Y29.78285
G01 X64.57222 Y29.72943
G01 X64.60166 Y29.72140
G01 X64.65916 Y29.71272
G01 X64.81802 Y29.69400
G01 X64.82122 Y29.69362
G01 X64.88743 Y29.69037
G01 X64.97590 Y29.69037
G01 X65.04215 Y29.69362
G01 X65.20417 Y29.71272
G01 X65.26170 Y29.72140
G01 X65.29114 Y29.72943
G01 X65.47425 Y29.78285
G01 X65.51057 Y29.79621
G01 X65.59208 Y29.83078
G01 X65.67669 Y29.87170
G01 X65.79437 Y29.93885
G01 X65.86673 Y29.98485
G01 X66.03808 Y30.12486
G01 X66.04611 Y30.13238
G01 X66.10768 Y30.19608
G01 X66.18781 Y30.28760
G01 X66.25317 Y30.37340
G01 X66.30326 Y30.44635
G01 X66.31631 Y30.46750
G01 X66.41159 Y30.64848
G01 X66.41923 Y30.66339
G01 X66.44445 Y30.73080
G01 X66.49111 Y30.87258
G01 X66.51095 Y30.95033
G01 X66.52858 Y31.03702
G01 X66.53650 Y31.08891
G01 X66.55121 Y31.26524
G01 X66.55380 Y31.30954
G01 X66.55121 Y31.35381
G01 X66.53650 Y31.53014
G01 X66.52858 Y31.58203
G01 X66.51095 Y31.66872
G01 X66.49114 Y31.74642
G01 X66.47869 Y31.78419
G01 X66.44445 Y31.88825
G01 X66.41923 Y31.95566
G01 X66.41159 Y31.97057
G01 X66.31631 Y32.15157
G01 X66.30326 Y32.17271
G01 X66.25317 Y32.24566
G01 X66.18781 Y32.33146
G01 X66.11032 Y32.41993
G01 X66.10768 Y32.42297
G01 X66.04611 Y32.48668
G01 X66.03808 Y32.49419
G01 X65.89348 Y32.61233
G01 X65.86894 Y32.63240
G01 X65.86668 Y32.63423
G01 X65.79437 Y32.68020
G01 X65.67669 Y32.74736
G01 X65.59208 Y32.78828
G01 X65.51057 Y32.82285
G01 X65.47425 Y32.83621
G01 X65.29114 Y32.88962
G01 X65.26170 Y32.89767
G01 X65.20417 Y32.90634
G01 X65.04220 Y32.92544
G01 X64.97590 Y32.92869
G01 X64.88743 Y32.92869
G01 X64.82114 Y32.92544
G01 X64.65916 Y32.90634
G01 X64.60163 Y32.89765
G01 X64.57222 Y32.88962
G01 X64.38909 Y32.83621
G01 X64.35279 Y32.82287
G01 X64.27131 Y32.78828
G01 X64.18665 Y32.74736
G01 X64.06900 Y32.68020
G01 X63.99661 Y32.63420
G01 X63.82526 Y32.49419
G01 X63.81723 Y32.48665
G01 X63.75571 Y32.42300
G01 X63.67555 Y32.33148
G01 X63.61022 Y32.24568
G01 X63.56006 Y32.17268
G01 X63.54703 Y32.15155
G01 X63.45744 Y31.98132
G01 X63.45439 Y31.96913
G01 X63.43715 Y31.88277
G01 X63.40314 Y31.65338
G01 X63.39549 Y31.57604
G01 X63.38421 Y31.34670
G01 X63.38421 Y31.27235
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.50399 Y45.07748 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.50399 Y45.07748
G01 X68.50859 Y45.06029
G01 X68.51750 Y45.04484
G01 X68.53010 Y45.03224
G01 X68.54557 Y45.02333
G01 X68.57846 Y45.01452
G01 X68.58768 Y45.01391
G01 X69.29489 Y45.01391
G01 X69.39047 Y45.00448
G01 X69.48240 Y44.97659
G01 X69.56711 Y44.93133
G01 X69.64137 Y44.87040
G01 X69.70231 Y44.79613
G01 X69.74757 Y44.71142
G01 X69.77546 Y44.61949
G01 X69.78489 Y44.52389
G01 X69.78489 Y40.60248
G01 X69.78549 Y40.59324
G01 X69.79431 Y40.56030
G01 X69.80322 Y40.54485
G01 X69.81585 Y40.53223
G01 X69.83127 Y40.52331
G01 X69.84846 Y40.51872
G01 X69.86632 Y40.51872
G01 X69.88351 Y40.52331
G01 X69.89893 Y40.53223
G01 X69.91155 Y40.54485
G01 X69.92047 Y40.56030
G01 X69.92928 Y40.59324
G01 X69.92989 Y40.60248
G01 X69.92989 Y44.52389
G01 X69.93932 Y44.61949
G01 X69.96721 Y44.71142
G01 X70.01247 Y44.79613
G01 X70.07340 Y44.87040
G01 X70.14767 Y44.93133
G01 X70.23238 Y44.97659
G01 X70.32430 Y45.00448
G01 X70.41991 Y45.01391
G01 X71.12710 Y45.01391
G01 X71.13632 Y45.01452
G01 X71.16924 Y45.02333
G01 X71.18468 Y45.03224
G01 X71.19728 Y45.04484
G01 X71.20619 Y45.06029
G01 X71.21079 Y45.07748
G01 X71.21079 Y45.09531
G01 X71.20619 Y45.11251
G01 X71.19728 Y45.12795
G01 X71.18465 Y45.14058
G01 X71.16924 Y45.14949
G01 X71.13637 Y45.15828
G01 X71.12710 Y45.15889
G01 X68.58768 Y45.15889
G01 X68.57841 Y45.15828
G01 X68.54557 Y45.14949
G01 X68.53012 Y45.14058
G01 X68.51750 Y45.12795
G01 X68.50859 Y45.11251
G01 X68.50399 Y45.09531
G01 X68.50399 Y45.07748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.59968 Y49.95553 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.59968 Y49.95553
G01 X63.60242 Y49.99975
G01 X63.61474 Y50.14196
G01 X63.61703 Y50.15591
G01 X63.63549 Y50.24250
G01 X63.65714 Y50.32398
G01 X63.68096 Y50.39258
G01 X63.71406 Y50.47468
G01 X63.72490 Y50.49815
G01 X63.78855 Y50.61270
G01 X63.81728 Y50.66078
G01 X63.83730 Y50.68649
G01 X63.93445 Y50.80658
G01 X63.93608 Y50.80831
G01 X63.99996 Y50.86985
G01 X64.07222 Y50.93292
G01 X64.12104 Y50.96947
G01 X64.19434 Y51.01895
G01 X64.22648 Y51.03840
G01 X64.33290 Y51.09246
G01 X64.39434 Y51.12080
G01 X64.41433 Y51.12718
G01 X64.56430 Y51.17305
G01 X64.57319 Y51.17572
G01 X64.63559 Y51.18687
G01 X64.65134 Y51.18895
G01 X64.75820 Y51.20226
G01 X64.80740 Y51.20470
G01 X64.89599 Y51.20470
G01 X64.94512 Y51.20226
G01 X65.04265 Y51.19012
G01 X65.05200 Y51.18895
G01 X65.13018 Y51.17572
G01 X65.13902 Y51.17305
G01 X65.28901 Y51.12718
G01 X65.30900 Y51.12080
G01 X65.37049 Y51.09243
G01 X65.47689 Y51.03840
G01 X65.50905 Y51.01892
G01 X65.58230 Y50.96949
G01 X65.63112 Y50.93292
G01 X65.70338 Y50.86985
G01 X65.76724 Y50.80836
G01 X65.76889 Y50.80660
G01 X65.86602 Y50.68654
G01 X65.88609 Y50.66078
G01 X65.91484 Y50.61265
G01 X65.97844 Y50.49815
G01 X65.98931 Y50.47460
G01 X66.02238 Y50.39258
G01 X66.04621 Y50.32398
G01 X66.05134 Y50.30465
G01 X66.06785 Y50.24250
G01 X66.08631 Y50.15598
G01 X66.08855 Y50.14224
G01 X66.10095 Y49.99982
G01 X66.10277 Y49.97447
G01 X66.10369 Y49.95555
G01 X66.10092 Y49.91120
G01 X66.08860 Y49.76909
G01 X66.08631 Y49.75507
G01 X66.06785 Y49.66858
G01 X66.04621 Y49.58707
G01 X66.02238 Y49.51847
G01 X65.98929 Y49.43640
G01 X65.97844 Y49.41288
G01 X65.91481 Y49.29838
G01 X65.88609 Y49.25027
G01 X65.86602 Y49.22451
G01 X65.76889 Y49.10445
G01 X65.76724 Y49.10270
G01 X65.70344 Y49.04125
G01 X65.63115 Y48.97813
G01 X65.58233 Y48.94158
G01 X65.50897 Y48.89208
G01 X65.47689 Y48.87265
G01 X65.37044 Y48.81860
G01 X65.30900 Y48.79025
G01 X65.28901 Y48.78388
G01 X65.13902 Y48.73800
G01 X65.13018 Y48.73534
G01 X65.05200 Y48.72210
G01 X64.94512 Y48.70879
G01 X64.89599 Y48.70635
G01 X64.80740 Y48.70635
G01 X64.75823 Y48.70879
G01 X64.65134 Y48.72210
G01 X64.57316 Y48.73534
G01 X64.56430 Y48.73800
G01 X64.41433 Y48.78388
G01 X64.39434 Y48.79025
G01 X64.33295 Y48.81857
G01 X64.31687 Y48.82673
G01 X64.22648 Y48.87265
G01 X64.19440 Y48.89205
G01 X64.12102 Y48.94158
G01 X64.07222 Y48.97813
G01 X63.99991 Y49.04125
G01 X63.93608 Y49.10275
G01 X63.93445 Y49.10447
G01 X63.83730 Y49.22457
G01 X63.81728 Y49.25027
G01 X63.78858 Y49.29833
G01 X63.72490 Y49.41288
G01 X63.71408 Y49.43633
G01 X63.68096 Y49.51847
G01 X63.65714 Y49.58707
G01 X63.63549 Y49.66858
G01 X63.61703 Y49.75515
G01 X63.61474 Y49.76909
G01 X63.60242 Y49.91128
G01 X63.59968 Y49.95553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.22124 Y54.27325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.22124 Y54.27325
G01 X68.19485 Y54.36103
G01 X68.18540 Y54.45366
G01 X68.19360 Y54.54640
G01 X68.20635 Y54.61508
G01 X68.23198 Y54.70459
G01 X68.27407 Y54.78767
G01 X68.33112 Y54.86126
G01 X68.37897 Y54.91216
G01 X68.44628 Y54.97172
G01 X68.47178 Y54.98704
G01 X68.53193 Y55.00406
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.94481 Y54.44101 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.94481 Y54.44101
G01 X66.97341 Y54.46141
G01 X66.98329 Y54.46553
G01 X67.13338 Y54.51104
G01 X67.22759 Y54.52979
G01 X67.38367 Y54.54515
G01 X67.47971 Y54.54515
G01 X67.63579 Y54.52979
G01 X67.70874 Y54.51528
G01 X67.73000 Y54.51104
G01 X67.88006 Y54.46553
G01 X67.96881 Y54.42875
G01 X68.10714 Y54.35483
G01 X68.18700 Y54.30147
G01 X68.22111 Y54.27348
G01 X68.22124 Y54.27325
G01 X68.22126 Y54.27325
G01 X68.22210 Y54.27205
G01 X68.26487 Y54.21404
G01 X68.29065 Y54.18064
G01 X68.34735 Y54.11046
G01 X68.34778 Y54.10995
G01 X68.44600 Y53.98854
G01 X68.46609 Y53.96278
G01 X68.49479 Y53.91470
G01 X68.55845 Y53.80015
G01 X68.56929 Y53.77668
G01 X68.60239 Y53.69458
G01 X68.62621 Y53.62598
G01 X68.64785 Y53.54450
G01 X68.66632 Y53.45791
G01 X68.66861 Y53.44396
G01 X68.68092 Y53.30175
G01 X68.68367 Y53.25753
G01 X68.68092 Y53.21328
G01 X68.66861 Y53.07107
G01 X68.66632 Y53.05715
G01 X68.64785 Y52.97058
G01 X68.62621 Y52.88907
G01 X68.60239 Y52.82047
G01 X68.56927 Y52.73833
G01 X68.55845 Y52.71488
G01 X68.49477 Y52.60033
G01 X68.46607 Y52.55227
G01 X68.44600 Y52.52651
G01 X68.34890 Y52.40647
G01 X68.34722 Y52.40470
G01 X68.28347 Y52.34328
G01 X68.21113 Y52.28013
G01 X68.16238 Y52.24361
G01 X68.08895 Y52.19405
G01 X68.05690 Y52.17465
G01 X67.95040 Y52.12057
G01 X67.88903 Y52.09225
G01 X67.86901 Y52.08588
G01 X67.79944 Y52.06462
G01 X67.71905 Y52.04000
G01 X67.71016 Y52.03734
G01 X67.63201 Y52.02410
G01 X67.52512 Y52.01079
G01 X67.47595 Y52.00835
G01 X67.38735 Y52.00835
G01 X67.33823 Y52.01079
G01 X67.23135 Y52.02410
G01 X67.15317 Y52.03734
G01 X67.14433 Y52.04000
G01 X66.99434 Y52.08588
G01 X66.97435 Y52.09225
G01 X66.91291 Y52.12060
G01 X66.86091 Y52.14699
G01 X66.80648 Y52.17462
G01 X66.77438 Y52.19408
G01 X66.70102 Y52.24358
G01 X66.65220 Y52.28013
G01 X66.57991 Y52.34325
G01 X66.51611 Y52.40470
G01 X66.51446 Y52.40645
G01 X66.41733 Y52.52651
G01 X66.39726 Y52.55227
G01 X66.36853 Y52.60038
G01 X66.30491 Y52.71491
G01 X66.29406 Y52.73838
G01 X66.26097 Y52.82047
G01 X66.23714 Y52.88907
G01 X66.21550 Y52.97058
G01 X66.19703 Y53.05707
G01 X66.19475 Y53.07109
G01 X66.18243 Y53.21320
G01 X66.17966 Y53.25753
G01 X66.18243 Y53.30182
G01 X66.19475 Y53.44399
G01 X66.19703 Y53.45798
G01 X66.21550 Y53.54450
G01 X66.23714 Y53.62598
G01 X66.26097 Y53.69458
G01 X66.29404 Y53.77660
G01 X66.30491 Y53.80015
G01 X66.36851 Y53.91465
G01 X66.39726 Y53.96278
G01 X66.41733 Y53.98854
G01 X66.51446 Y54.10860
G01 X66.51611 Y54.11036
G01 X66.57996 Y54.17185
G01 X66.65223 Y54.23492
G01 X66.70105 Y54.27147
G01 X66.73371 Y54.29481
G01 X66.77430 Y54.32092
G01 X66.79744 Y54.33494
G01 X66.89396 Y54.40225
G01 X66.90427 Y54.41046
G01 X66.94481 Y54.44101
G01 X66.97100 Y54.45971
G01 X67.00437 Y54.50576
G01 X67.04252 Y54.58539
G01 X67.06576 Y54.67055
G01 X67.07801 Y54.73936
G01 X67.08553 Y54.83225
G01 X67.07534 Y54.92486
G01 X67.04778 Y55.01389
G01 X67.03246 Y55.05061
G01 X67.00996 Y55.07380
G01 X66.91959 Y55.17385
G01 X66.85934 Y55.24818
G01 X66.81646 Y55.33230
G01 X66.79233 Y55.42206
G01 X66.77692 Y55.49407
G01 X66.77580 Y55.49918
G01 X66.76648 Y55.54152
G01 X66.73770 Y55.62407
G01 X66.72505 Y55.64482
G01 X66.64666 Y55.72465
G01 X66.59233 Y55.76860
G01 X66.51466 Y55.82003
G01 X66.42866 Y55.85582
G01 X66.33744 Y55.87472
G01 X66.26798 Y55.88231
G01 X66.17483 Y55.88358
G01 X66.08311 Y55.86720
G01 X66.06602 Y55.86062
G01 X66.05416 Y55.85257
G01 X66.11014 Y55.92077
G01 X66.16351 Y56.00065
G01 X66.23744 Y56.13895
G01 X66.27420 Y56.22770
G01 X66.31972 Y56.37776
G01 X66.33846 Y56.47200
G01 X66.35383 Y56.62806
G01 X66.35383 Y56.72412
G01 X66.33846 Y56.88018
G01 X66.31972 Y56.97441
G01 X66.27420 Y57.12447
G01 X66.23744 Y57.21322
G01 X66.20575 Y57.27250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.78235 Y57.26854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.78235 Y57.26854
G01 X66.78078 Y57.26666
G01 X66.75741 Y57.18965
G01 X66.74798 Y57.09407
G01 X66.74798 Y55.59458
G01 X66.76648 Y55.54152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.05416 Y55.85257 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.05416 Y55.85257
G01 X66.00384 Y55.81835
G01 X65.99566 Y55.81185
G01 X65.94707 Y55.77561
G01 X65.92137 Y55.75767
G01 X65.84568 Y55.69877
G01 X65.79683 Y55.66217
G01 X65.72353 Y55.61269
G01 X65.69137 Y55.59321
G01 X65.58500 Y55.53918
G01 X65.52350 Y55.51081
G01 X65.50351 Y55.50444
G01 X65.35352 Y55.45856
G01 X65.34469 Y55.45592
G01 X65.26643 Y55.44266
G01 X65.15960 Y55.42935
G01 X65.11042 Y55.42694
G01 X65.02195 Y55.42694
G01 X64.97275 Y55.42935
G01 X64.86592 Y55.44266
G01 X64.78766 Y55.45592
G01 X64.77882 Y55.45856
G01 X64.62884 Y55.50444
G01 X64.60882 Y55.51081
G01 X64.54735 Y55.53918
G01 X64.52637 Y55.54983
G01 X64.44100 Y55.59321
G01 X64.40882 Y55.61269
G01 X64.33552 Y55.66217
G01 X64.28675 Y55.69870
G01 X64.21441 Y55.76184
G01 X64.15061 Y55.82331
G01 X64.14896 Y55.82506
G01 X64.05183 Y55.94510
G01 X64.03176 Y55.97086
G01 X64.00303 Y56.01896
G01 X63.94228 Y56.12831
G01 X63.93941 Y56.13347
G01 X63.92856 Y56.15696
G01 X63.89546 Y56.23903
G01 X63.87164 Y56.30763
G01 X63.85000 Y56.38912
G01 X63.84982 Y56.38983
G01 X63.83153 Y56.47563
G01 X63.82925 Y56.48965
G01 X63.81693 Y56.63179
G01 X63.81416 Y56.67609
G01 X63.81693 Y56.72041
G01 X63.82925 Y56.86252
G01 X63.83153 Y56.87657
G01 X63.85000 Y56.96308
G01 X63.87164 Y57.04456
G01 X63.89546 Y57.11317
G01 X63.92856 Y57.19524
G01 X63.93941 Y57.21873
G01 X64.00303 Y57.33324
G01 X64.03176 Y57.38134
G01 X64.05183 Y57.40710
G01 X64.14896 Y57.52714
G01 X64.15061 Y57.52889
G01 X64.21441 Y57.59036
G01 X64.28675 Y57.65350
G01 X64.33552 Y57.69003
G01 X64.40882 Y57.73951
G01 X64.44098 Y57.75899
G01 X64.54735 Y57.81302
G01 X64.60882 Y57.84139
G01 X64.62884 Y57.84776
G01 X64.77882 Y57.89364
G01 X64.78764 Y57.89628
G01 X64.84893 Y57.90725
G01 X64.86592 Y57.90954
G01 X64.97275 Y57.92285
G01 X65.02195 Y57.92526
G01 X65.11042 Y57.92526
G01 X65.15962 Y57.92285
G01 X65.25713 Y57.91071
G01 X65.26643 Y57.90954
G01 X65.34466 Y57.89628
G01 X65.35352 Y57.89364
G01 X65.50351 Y57.84776
G01 X65.52350 Y57.84139
G01 X65.58500 Y57.81302
G01 X65.69134 Y57.75899
G01 X65.72353 Y57.73951
G01 X65.79683 Y57.69003
G01 X65.84562 Y57.65348
G01 X65.91794 Y57.59036
G01 X65.98174 Y57.52889
G01 X65.98342 Y57.52711
G01 X66.04715 Y57.44835
G01 X66.05792 Y57.43529
G01 X66.06379 Y57.42831
G01 X66.08149 Y57.40789
G01 X66.14207 Y57.34004
G01 X66.16371 Y57.31657
G01 X66.20575 Y57.27250
G01 X66.21535 Y57.26676
G01 X66.29957 Y57.22681
G01 X66.38984 Y57.20354
G01 X66.48291 Y57.19778
G01 X66.55273 Y57.20011
G01 X66.64509 Y57.21205
G01 X66.73351 Y57.24126
G01 X66.78235 Y57.26854
G01 X66.80714 Y57.29775
G01 X66.85553 Y57.35063
G01 X66.90440 Y57.40016
G01 X66.99205 Y57.47273
G01 X67.07615 Y57.51558
G01 X67.17313 Y57.54121
G01 X67.19264 Y57.54319
G01 X67.23798 Y57.54431
G01 X67.40254 Y57.54431
G01 X67.51852 Y57.55180
G01 X67.58128 Y57.55988
G01 X67.72906 Y57.60049
G01 X67.74666 Y57.61073
G01 X67.81372 Y57.66801
G01 X67.86254 Y57.71797
G01 X67.92106 Y57.79051
G01 X67.96475 Y57.87283
G01 X67.99208 Y57.96194
G01 X68.00612 Y58.03039
G01 X68.01605 Y58.12023
G01 X68.00930 Y58.21037
G01 X68.00320 Y58.23336
G01 X68.00203 Y58.23549
G01 X68.00203 Y58.23552
G01 X67.98291 Y58.27103
G01 X67.96703 Y58.29930
G01 X67.95019 Y58.32818
G01 X67.90219 Y58.40768
G01 X67.88776 Y58.42907
G01 X67.85527 Y58.48299
G01 X67.79726 Y58.58734
G01 X67.78123 Y58.62124
G01 X67.74735 Y58.70306
G01 X67.73472 Y58.73836
G01 X67.70193 Y58.85317
G01 X67.69083 Y58.89602
G01 X67.68469 Y58.93991
G01 X67.67105 Y59.05845
G01 X67.66922 Y59.09595
G01 X67.66922 Y59.18441
G01 X67.67105 Y59.22193
G01 X67.68469 Y59.34047
G01 X67.69083 Y59.38439
G01 X67.69551 Y59.40344
G01 X67.70196 Y59.42724
G01 X67.73472 Y59.54199
G01 X67.74735 Y59.57733
G01 X67.78123 Y59.65909
G01 X67.79728 Y59.69302
G01 X67.85525 Y59.79737
G01 X67.87773 Y59.83554
G01 X67.90442 Y59.87095
G01 X67.93414 Y59.90839
G01 X67.97414 Y59.96282
G01 X67.99487 Y59.99335
G01 X68.04973 Y60.07504
G01 X68.06812 Y60.10620
G01 X68.06815 Y60.10620
G01 X68.16307 Y60.18413
G01 X68.24295 Y60.23750
G01 X68.38126 Y60.31141
G01 X68.47000 Y60.34819
G01 X68.62007 Y60.39371
G01 X68.70287 Y60.41019
G01 X69.93388 Y60.41017
G01 X70.01671 Y60.39371
G01 X70.16677 Y60.34819
G01 X70.25552 Y60.31141
G01 X70.39382 Y60.23750
G01 X70.47371 Y60.18413
G01 X70.57211 Y60.10336
G01 X70.58834 Y60.07661
G01 X70.58890 Y60.07585
G01 X70.62862 Y60.01629
G01 X70.63990 Y59.99795
G01 X70.70261 Y59.90839
G01 X70.73233 Y59.87095
G01 X70.75903 Y59.83554
G01 X70.78148 Y59.79737
G01 X70.83947 Y59.69305
G01 X70.85552 Y59.65909
G01 X70.88940 Y59.57733
G01 X70.90203 Y59.54197
G01 X70.93479 Y59.42724
G01 X70.94592 Y59.38434
G01 X70.95207 Y59.34047
G01 X70.96571 Y59.22193
G01 X70.96753 Y59.18441
G01 X70.96753 Y59.09595
G01 X70.96571 Y59.05843
G01 X70.95207 Y58.93991
G01 X70.94592 Y58.89602
G01 X70.93482 Y58.85317
G01 X70.90205 Y58.73839
G01 X70.88940 Y58.70306
G01 X70.85552 Y58.62124
G01 X70.83947 Y58.58734
G01 X70.78148 Y58.48299
G01 X70.75903 Y58.44484
G01 X70.73236 Y58.40948
G01 X70.65816 Y58.31601
G01 X70.63294 Y58.28817
G01 X70.57038 Y58.22561
G01 X70.54257 Y58.20039
G01 X70.44907 Y58.12620
G01 X70.41371 Y58.09953
G01 X70.37551 Y58.07705
G01 X70.27122 Y58.01909
G01 X70.23726 Y58.00303
G01 X70.15560 Y57.96920
G01 X70.12017 Y57.95653
G01 X70.00548 Y57.92376
G01 X69.96253 Y57.91264
G01 X69.91867 Y57.90649
G01 X69.77866 Y57.89039
G01 X69.76284 Y57.88866
G01 X69.71839 Y57.88343
G01 X69.63962 Y57.87073
G01 X69.56975 Y57.85640
G01 X69.55286 Y57.85018
G01 X68.91839 Y57.85018
G01 X68.87036 Y57.85254
G01 X68.71428 Y57.86791
G01 X68.62007 Y57.88665
G01 X68.47000 Y57.93217
G01 X68.38126 Y57.96892
G01 X68.24295 Y58.04286
G01 X68.16307 Y58.09623
G01 X68.04186 Y58.19572
G01 X68.00203 Y58.23549
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.06815 Y60.10620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.06815 Y60.10620
G01 X68.06871 Y60.10717
G01 X68.08207 Y60.18060
G01 X68.08707 Y60.25030
G01 X68.08489 Y60.34352
G01 X68.06505 Y60.43463
G01 X68.02835 Y60.52033
G01 X67.99485 Y60.58164
G01 X67.91133 Y60.69320
G01 X67.86431 Y60.74019
G01 X68.03736 Y60.74019
G01 X68.04186 Y60.73572
G01 X68.16307 Y60.63623
G01 X68.24295 Y60.58286
G01 X68.38126 Y60.50892
G01 X68.47000 Y60.47217
G01 X68.62007 Y60.42665
G01 X68.70287 Y60.41019
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.93388 Y60.41017 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.93388 Y60.41017
G01 X70.01671 Y60.42665
G01 X70.16677 Y60.47217
G01 X70.25552 Y60.50892
G01 X70.39382 Y60.58286
G01 X70.47371 Y60.63623
G01 X70.59492 Y60.73572
G01 X70.59941 Y60.74019
G01 X70.77241 Y60.74019
G01 X70.72537 Y60.69312
G01 X70.67810 Y60.63826
G01 X70.65623 Y60.60872
G01 X70.60256 Y60.51682
G01 X70.57002 Y60.41548
G01 X70.55600 Y60.34702
G01 X70.54605 Y60.25446
G01 X70.55382 Y60.16168
G01 X70.56855 Y60.10923
G01 X70.57211 Y60.10336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.58702 Y63.28532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.58702 Y63.28532
G01 X70.56860 Y63.25410
G01 X70.56855 Y63.25405
G01 X70.47371 Y63.17623
G01 X70.39382 Y63.12286
G01 X70.25552 Y63.04892
G01 X70.16677 Y63.01217
G01 X70.01671 Y62.96665
G01 X69.93388 Y62.95017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.70287 Y62.95019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.70287 Y62.95019
G01 X68.62007 Y62.93371
G01 X68.47000 Y62.88819
G01 X68.38126 Y62.85141
G01 X68.24295 Y62.77750
G01 X68.16307 Y62.72413
G01 X68.04186 Y62.62464
G01 X68.03742 Y62.62020
G01 X67.86434 Y62.62020
G01 X67.91133 Y62.66716
G01 X67.95893 Y62.72248
G01 X67.98077 Y62.75205
G01 X68.03422 Y62.84372
G01 X68.06668 Y62.94473
G01 X68.08072 Y63.01318
G01 X68.09068 Y63.10584
G01 X68.08293 Y63.19871
G01 X68.06820 Y63.25113
G01 X68.04841 Y63.28374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.99314 Y65.11585 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.99314 Y65.11585
G01 X68.04186 Y65.16464
G01 X68.16307 Y65.26413
G01 X68.24295 Y65.31750
G01 X68.38126 Y65.39141
G01 X68.47000 Y65.42819
G01 X68.60838 Y65.47018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.89637 Y65.54297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.89637 Y65.54297
G01 X67.82017 Y65.61836
G01 X67.75245 Y65.69720
G01 X67.73973 Y65.71430
G01 X67.69739 Y65.79723
G01 X67.69688 Y65.79840
G01 X67.68695 Y65.83106
G01 X67.67122 Y65.89537
G01 X67.66927 Y65.91496
G01 X67.66813 Y65.96019
G01 X67.66813 Y67.56019
G01 X67.66927 Y67.60545
G01 X67.67122 Y67.62499
G01 X67.69688 Y67.72201
G01 X67.73973 Y67.80611
G01 X67.79911 Y67.87942
G01 X67.87247 Y67.93883
G01 X67.95662 Y67.98170
G01 X68.05360 Y68.00733
G01 X68.07310 Y68.00931
G01 X68.11839 Y68.01043
G01 X70.51839 Y68.01043
G01 X70.56332 Y68.00931
G01 X70.58323 Y68.00733
G01 X70.68008 Y67.98170
G01 X70.68115 Y67.98127
G01 X70.76436 Y67.93878
G01 X70.83761 Y67.87944
G01 X70.85189 Y67.86321
G01 X70.89700 Y67.80611
G01 X70.93987 Y67.72201
G01 X70.96553 Y67.62499
G01 X70.96748 Y67.60545
G01 X70.96863 Y67.56019
G01 X70.96863 Y65.96019
G01 X70.96748 Y65.91493
G01 X70.96553 Y65.89542
G01 X70.93987 Y65.79837
G01 X70.89702 Y65.71427
G01 X70.81661 Y65.61836
G01 X70.80830 Y65.61016
G01 X70.79339 Y65.59573
G01 X70.69972 Y65.50718
G01 X70.69725 Y65.50485
G01 X70.61399 Y65.47960
G01 X70.51839 Y65.47018
G01 X70.02829 Y65.47018
G01 X70.01615 Y65.47198
G01 X69.92138 Y65.48135
G01 X69.76454 Y65.48905
G01 X69.71839 Y65.49017
G01 X68.91836 Y65.49017
G01 X68.87221 Y65.48905
G01 X68.71537 Y65.48135
G01 X68.62060 Y65.47198
G01 X68.60838 Y65.47018
G01 X68.11839 Y65.47018
G01 X68.02279 Y65.47960
G01 X67.93701 Y65.50561
G01 X67.93620 Y65.50632
G01 X67.89637 Y65.54297
G01 X67.93620 Y65.50637
G01 X67.93620 Y65.50632
G01 X67.94514 Y65.48999
G01 X67.98184 Y65.40429
G01 X68.00165 Y65.31320
G01 X68.00384 Y65.22001
G01 X67.99883 Y65.15034
G01 X67.99314 Y65.11585
G01 X67.98123 Y65.09075
G01 X67.92573 Y64.98976
G01 X67.91463 Y64.97218
G01 X67.90208 Y64.95288
G01 X67.89365 Y64.94023
G01 X67.85525 Y64.87737
G01 X67.79728 Y64.77305
G01 X67.78123 Y64.73909
G01 X67.74735 Y64.65733
G01 X67.73472 Y64.62199
G01 X67.70196 Y64.50724
G01 X67.69083 Y64.46439
G01 X67.68469 Y64.42047
G01 X67.67105 Y64.30193
G01 X67.66922 Y64.26441
G01 X67.66922 Y64.17595
G01 X67.67105 Y64.13845
G01 X67.68469 Y64.01991
G01 X67.69083 Y63.97602
G01 X67.70193 Y63.93317
G01 X67.73472 Y63.81836
G01 X67.74735 Y63.78306
G01 X67.78123 Y63.70124
G01 X67.79726 Y63.66734
G01 X67.85527 Y63.56299
G01 X67.87773 Y63.52484
G01 X67.90440 Y63.48948
G01 X67.93419 Y63.45192
G01 X67.99683 Y63.36243
G01 X68.00808 Y63.34412
G01 X68.04780 Y63.28458
G01 X68.04841 Y63.28374
G01 X68.06464 Y63.25700
G01 X68.16307 Y63.17623
G01 X68.24295 Y63.12286
G01 X68.38126 Y63.04892
G01 X68.47000 Y63.01217
G01 X68.62007 Y62.96665
G01 X68.70287 Y62.95019
G01 X69.93388 Y62.95017
G01 X70.01671 Y62.93371
G01 X70.16677 Y62.88819
G01 X70.25552 Y62.85141
G01 X70.39382 Y62.77750
G01 X70.47371 Y62.72413
G01 X70.59492 Y62.62464
G01 X70.59936 Y62.62020
G01 X70.77241 Y62.62020
G01 X70.72542 Y62.66716
G01 X70.64188 Y62.77877
G01 X70.60838 Y62.84011
G01 X70.57168 Y62.92581
G01 X70.55186 Y63.01689
G01 X70.54968 Y63.11008
G01 X70.55468 Y63.17976
G01 X70.56804 Y63.25319
G01 X70.58702 Y63.28532
G01 X70.63921 Y63.36304
G01 X70.64188 Y63.36701
G01 X70.66261 Y63.39754
G01 X70.70256 Y63.45192
G01 X70.73236 Y63.48948
G01 X70.75900 Y63.52482
G01 X70.78148 Y63.56299
G01 X70.83947 Y63.66734
G01 X70.85552 Y63.70124
G01 X70.88940 Y63.78306
G01 X70.90205 Y63.81839
G01 X70.93482 Y63.93317
G01 X70.94592 Y63.97602
G01 X70.95207 Y64.01991
G01 X70.96571 Y64.13843
G01 X70.96753 Y64.17595
G01 X70.96753 Y64.26441
G01 X70.96571 Y64.30193
G01 X70.95207 Y64.42047
G01 X70.94592 Y64.46434
G01 X70.93479 Y64.50724
G01 X70.90200 Y64.62210
G01 X70.88940 Y64.65733
G01 X70.85552 Y64.73909
G01 X70.83947 Y64.77305
G01 X70.78150 Y64.87737
G01 X70.74310 Y64.94026
G01 X70.73467 Y64.95288
G01 X70.67546 Y65.05509
G01 X70.65704 Y65.09202
G01 X70.64574 Y65.11384
G01 X70.64569 Y65.11387
G01 X70.59492 Y65.16464
G01 X70.47371 Y65.26413
G01 X70.39382 Y65.31750
G01 X70.25552 Y65.39141
G01 X70.16677 Y65.42819
G01 X70.02829 Y65.47018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.65704 Y65.09202 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.65704 Y65.09202
G01 X70.64569 Y65.11387
G01 X70.64300 Y65.11910
G01 X70.64269 Y65.11966
G01 X70.62951 Y65.21127
G01 X70.63393 Y65.30437
G01 X70.65590 Y65.39494
G01 X70.67876 Y65.46098
G01 X70.69969 Y65.50716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.80207 Y65.27681 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.80207 Y65.27681
G01 X75.80263 Y65.27757
G01 X75.82051 Y65.33137
G01 X75.83308 Y65.41193
G01 X75.83806 Y65.48163
G01 X75.83583 Y65.57475
G01 X75.81604 Y65.66573
G01 X75.79839 Y65.70693
G01 X75.79994 Y65.70497
G01 X75.86295 Y65.66286
G01 X76.00126 Y65.58892
G01 X76.09000 Y65.55217
G01 X76.24007 Y65.50665
G01 X76.32287 Y65.49017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.20702 Y63.28532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.20702 Y63.28532
G01 X78.18860 Y63.25410
G01 X78.18855 Y63.25405
G01 X78.09371 Y63.17623
G01 X78.01382 Y63.12286
G01 X77.87552 Y63.04892
G01 X77.78677 Y63.01217
G01 X77.63671 Y62.96665
G01 X77.55388 Y62.95017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.32287 Y62.95019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.32287 Y62.95019
G01 X76.24007 Y62.93371
G01 X76.09000 Y62.88819
G01 X76.00126 Y62.85141
G01 X75.86295 Y62.77750
G01 X75.78307 Y62.72413
G01 X75.66186 Y62.62464
G01 X75.65742 Y62.62020
G01 X75.48434 Y62.62020
G01 X75.53133 Y62.66716
G01 X75.57893 Y62.72248
G01 X75.60077 Y62.75205
G01 X75.65422 Y62.84372
G01 X75.68668 Y62.94473
G01 X75.70072 Y63.01318
G01 X75.71068 Y63.10584
G01 X75.70293 Y63.19871
G01 X75.68820 Y63.25113
G01 X75.66841 Y63.28374
G01 X75.68464 Y63.25700
G01 X75.78307 Y63.17623
G01 X75.86295 Y63.12286
G01 X76.00126 Y63.04892
G01 X76.09000 Y63.01217
G01 X76.24007 Y62.96665
G01 X76.32287 Y62.95019
G01 X77.55388 Y62.95017
G01 X77.63671 Y62.93371
G01 X77.78677 Y62.88819
G01 X77.87552 Y62.85141
G01 X78.01382 Y62.77750
G01 X78.09371 Y62.72413
G01 X78.21492 Y62.62464
G01 X78.21936 Y62.62020
G01 X78.39241 Y62.62020
G01 X78.34542 Y62.66716
G01 X78.26188 Y62.77877
G01 X78.22838 Y62.84011
G01 X78.19168 Y62.92581
G01 X78.17186 Y63.01689
G01 X78.16968 Y63.11008
G01 X78.17468 Y63.17976
G01 X78.18804 Y63.25319
G01 X78.20702 Y63.28532
G01 X78.25921 Y63.36304
G01 X78.26188 Y63.36701
G01 X78.28261 Y63.39754
G01 X78.32256 Y63.45192
G01 X78.35236 Y63.48948
G01 X78.37900 Y63.52482
G01 X78.40148 Y63.56299
G01 X78.45947 Y63.66734
G01 X78.47552 Y63.70124
G01 X78.50940 Y63.78306
G01 X78.52205 Y63.81839
G01 X78.55482 Y63.93317
G01 X78.56592 Y63.97602
G01 X78.57207 Y64.01991
G01 X78.58571 Y64.13843
G01 X78.58753 Y64.17595
G01 X78.58753 Y64.26441
G01 X78.58571 Y64.30193
G01 X78.57207 Y64.42047
G01 X78.56592 Y64.46434
G01 X78.55479 Y64.50724
G01 X78.52200 Y64.62210
G01 X78.50940 Y64.65733
G01 X78.47552 Y64.73909
G01 X78.45947 Y64.77305
G01 X78.40148 Y64.87737
G01 X78.37905 Y64.91552
G01 X78.35233 Y64.95092
G01 X78.32914 Y64.98013
G01 X78.27816 Y65.04437
G01 X78.25291 Y65.07221
G01 X78.24230 Y65.08374
G01 X78.19226 Y65.13703
G01 X78.15401 Y65.18041
G01 X78.10862 Y65.23525
G01 X78.08952 Y65.25908
G01 X78.07682 Y65.27538
G01 X78.01382 Y65.31750
G01 X77.87552 Y65.39141
G01 X77.78677 Y65.42819
G01 X77.63671 Y65.47371
G01 X77.55388 Y65.49017
G01 X76.32287 Y65.49017
G01 X76.24007 Y65.47371
G01 X76.09000 Y65.42819
G01 X76.00126 Y65.39141
G01 X75.86295 Y65.31750
G01 X75.80207 Y65.27681
G01 X75.80204 Y65.27681
G01 X75.78802 Y65.25809
G01 X75.73641 Y65.19489
G01 X75.70093 Y65.15501
G01 X75.68449 Y65.13703
G01 X75.63453 Y65.08379
G01 X75.62384 Y65.07221
G01 X75.59856 Y65.04435
G01 X75.52442 Y64.95095
G01 X75.49773 Y64.91554
G01 X75.47525 Y64.87737
G01 X75.41728 Y64.77302
G01 X75.40123 Y64.73909
G01 X75.36735 Y64.65733
G01 X75.35472 Y64.62199
G01 X75.32196 Y64.50724
G01 X75.31083 Y64.46439
G01 X75.30469 Y64.42047
G01 X75.29105 Y64.30193
G01 X75.28922 Y64.26441
G01 X75.28922 Y64.17595
G01 X75.29105 Y64.13845
G01 X75.30469 Y64.01991
G01 X75.31083 Y63.97602
G01 X75.32193 Y63.93317
G01 X75.35472 Y63.81836
G01 X75.36735 Y63.78306
G01 X75.40123 Y63.70124
G01 X75.41726 Y63.66734
G01 X75.47527 Y63.56299
G01 X75.49773 Y63.52484
G01 X75.52440 Y63.48948
G01 X75.55419 Y63.45192
G01 X75.61683 Y63.36243
G01 X75.62808 Y63.34412
G01 X75.66780 Y63.28458
G01 X75.66841 Y63.28374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.32287 Y60.41019 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.32287 Y60.41019
G01 X76.24007 Y60.39371
G01 X76.09000 Y60.34819
G01 X76.00126 Y60.31141
G01 X75.86295 Y60.23750
G01 X75.78307 Y60.18413
G01 X75.68815 Y60.10620
G01 X75.68871 Y60.10717
G01 X75.70207 Y60.18060
G01 X75.70707 Y60.25030
G01 X75.70489 Y60.34352
G01 X75.68505 Y60.43463
G01 X75.64835 Y60.52033
G01 X75.61485 Y60.58164
G01 X75.53133 Y60.69320
G01 X75.48431 Y60.74019
G01 X75.65737 Y60.74019
G01 X75.66186 Y60.73572
G01 X75.77608 Y60.64197
G01 X75.78307 Y60.63623
G01 X75.86295 Y60.58286
G01 X76.00126 Y60.50892
G01 X76.09000 Y60.47217
G01 X76.24007 Y60.42665
G01 X76.32287 Y60.41019
G01 X77.55388 Y60.41017
G01 X77.63671 Y60.42665
G01 X77.78677 Y60.47217
G01 X77.87552 Y60.50892
G01 X78.01382 Y60.58286
G01 X78.09371 Y60.63623
G01 X78.21492 Y60.73572
G01 X78.21941 Y60.74019
G01 X78.39241 Y60.74019
G01 X78.34537 Y60.69312
G01 X78.29810 Y60.63826
G01 X78.27623 Y60.60872
G01 X78.22256 Y60.51682
G01 X78.19002 Y60.41548
G01 X78.17600 Y60.34702
G01 X78.16605 Y60.25446
G01 X78.17382 Y60.16168
G01 X78.18855 Y60.10923
G01 X78.19211 Y60.10336
G01 X78.20834 Y60.07661
G01 X78.20890 Y60.07585
G01 X78.24862 Y60.01629
G01 X78.25990 Y59.99795
G01 X78.32261 Y59.90839
G01 X78.35233 Y59.87095
G01 X78.37903 Y59.83554
G01 X78.40148 Y59.79737
G01 X78.45947 Y59.69305
G01 X78.47552 Y59.65909
G01 X78.50940 Y59.57733
G01 X78.52203 Y59.54197
G01 X78.55479 Y59.42724
G01 X78.56592 Y59.38434
G01 X78.57207 Y59.34047
G01 X78.58571 Y59.22193
G01 X78.58753 Y59.18441
G01 X78.58753 Y59.09595
G01 X78.58571 Y59.05843
G01 X78.57207 Y58.93991
G01 X78.56592 Y58.89602
G01 X78.55482 Y58.85317
G01 X78.52205 Y58.73839
G01 X78.50940 Y58.70306
G01 X78.47552 Y58.62124
G01 X78.45947 Y58.58734
G01 X78.40148 Y58.48299
G01 X78.37903 Y58.44482
G01 X78.35236 Y58.40948
G01 X78.32424 Y58.37405
G01 X78.29531 Y58.33552
G01 X78.28004 Y58.31406
G01 X78.25906 Y58.28317
G01 X78.20778 Y58.20441
G01 X78.19168 Y58.17804
G01 X78.19165 Y58.17796
G01 X78.18997 Y58.17522
G01 X78.09371 Y58.09623
G01 X78.01382 Y58.04286
G01 X77.87552 Y57.96892
G01 X77.78677 Y57.93217
G01 X77.63671 Y57.88665
G01 X77.54248 Y57.86791
G01 X77.38642 Y57.85254
G01 X77.33839 Y57.85018
G01 X76.94837 Y57.85018
G01 X76.88040 Y57.87057
G01 X76.81055 Y57.88061
G01 X76.68106 Y57.88993
G01 X76.53839 Y57.88993
G01 X76.49414 Y57.89102
G01 X76.45663 Y57.89285
G01 X76.33809 Y57.90649
G01 X76.29422 Y57.91264
G01 X76.25127 Y57.92376
G01 X76.13659 Y57.95653
G01 X76.10115 Y57.96920
G01 X76.01949 Y58.00303
G01 X75.98553 Y58.01909
G01 X75.88124 Y58.07705
G01 X75.84304 Y58.09953
G01 X75.80768 Y58.12620
G01 X75.71418 Y58.20039
G01 X75.68637 Y58.22561
G01 X75.62381 Y58.28817
G01 X75.59859 Y58.31601
G01 X75.52440 Y58.40948
G01 X75.49773 Y58.44484
G01 X75.47527 Y58.48299
G01 X75.41726 Y58.58734
G01 X75.40123 Y58.62124
G01 X75.36735 Y58.70306
G01 X75.35472 Y58.73836
G01 X75.32193 Y58.85317
G01 X75.31083 Y58.89602
G01 X75.30469 Y58.93991
G01 X75.29105 Y59.05845
G01 X75.28922 Y59.09595
G01 X75.28922 Y59.18441
G01 X75.29105 Y59.22193
G01 X75.30469 Y59.34047
G01 X75.31083 Y59.38439
G01 X75.31551 Y59.40344
G01 X75.32196 Y59.42724
G01 X75.35472 Y59.54199
G01 X75.36735 Y59.57733
G01 X75.40123 Y59.65909
G01 X75.41728 Y59.69302
G01 X75.47525 Y59.79737
G01 X75.49773 Y59.83554
G01 X75.52442 Y59.87095
G01 X75.55414 Y59.90839
G01 X75.59414 Y59.96282
G01 X75.61487 Y59.99335
G01 X75.66973 Y60.07504
G01 X75.68812 Y60.10620
G01 X75.68815 Y60.10620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.40112 Y57.55691 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.40112 Y57.55691
G01 X78.37613 Y57.56890
G01 X78.37608 Y57.56890
G01 X78.24601 Y57.58170
G01 X78.14997 Y57.58170
G01 X77.99389 Y57.56633
G01 X77.89968 Y57.54759
G01 X77.74959 Y57.50207
G01 X77.66087 Y57.46532
G01 X77.52254 Y57.39138
G01 X77.44268 Y57.33801
G01 X77.32145 Y57.23852
G01 X77.28114 Y57.19821
G01 X77.27918 Y57.19453
G01 X77.26259 Y57.16316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.88040 Y57.87057 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.88040 Y57.87057
G01 X77.00946 Y57.83184
G01 X77.05089 Y57.80522
G01 X77.11827 Y57.74101
G01 X77.16404 Y57.68823
G01 X77.21814 Y57.61228
G01 X77.25690 Y57.52747
G01 X77.27888 Y57.43684
G01 X77.28881 Y57.36768
G01 X77.29155 Y57.25145
G01 X77.27918 Y57.19453
G01 X77.27918 Y57.19448
G01 X77.26259 Y57.16316
G01 X77.25170 Y57.14309
G01 X77.22841 Y57.10149
G01 X77.18172 Y57.02663
G01 X77.13483 Y56.95122
G01 X77.07121 Y56.83672
G01 X77.06036 Y56.81320
G01 X77.02726 Y56.73113
G01 X77.00344 Y56.66252
G01 X76.98180 Y56.58101
G01 X76.96333 Y56.49453
G01 X76.96105 Y56.48051
G01 X76.94873 Y56.33839
G01 X76.94596 Y56.29407
G01 X76.94873 Y56.24977
G01 X76.96105 Y56.10766
G01 X76.96333 Y56.09361
G01 X76.98180 Y56.00710
G01 X77.00344 Y55.92564
G01 X77.02726 Y55.85701
G01 X77.06033 Y55.77500
G01 X77.07121 Y55.75145
G01 X77.13481 Y55.63695
G01 X77.16356 Y55.58881
G01 X77.18365 Y55.56303
G01 X77.28076 Y55.44302
G01 X77.28243 Y55.44124
G01 X77.34621 Y55.37980
G01 X77.41852 Y55.31668
G01 X77.46732 Y55.28015
G01 X77.54062 Y55.23067
G01 X77.57275 Y55.21119
G01 X77.60974 Y55.19242
G01 X77.67915 Y55.15717
G01 X77.74065 Y55.12880
G01 X77.76064 Y55.12242
G01 X77.91062 Y55.07655
G01 X77.91946 Y55.07388
G01 X77.99772 Y55.06062
G01 X78.10453 Y55.04734
G01 X78.15375 Y55.04492
G01 X78.24222 Y55.04492
G01 X78.29142 Y55.04734
G01 X78.39823 Y55.06062
G01 X78.47649 Y55.07388
G01 X78.48532 Y55.07655
G01 X78.63531 Y55.12242
G01 X78.65530 Y55.12880
G01 X78.71680 Y55.15717
G01 X78.82320 Y55.21119
G01 X78.85533 Y55.23067
G01 X78.92863 Y55.28015
G01 X78.97742 Y55.31668
G01 X79.04974 Y55.37980
G01 X79.11352 Y55.44124
G01 X79.11519 Y55.44302
G01 X79.21230 Y55.56303
G01 X79.23239 Y55.58881
G01 X79.26114 Y55.63695
G01 X79.32474 Y55.75145
G01 X79.33562 Y55.77500
G01 X79.36869 Y55.85701
G01 X79.39251 Y55.92562
G01 X79.41415 Y56.00710
G01 X79.43262 Y56.09361
G01 X79.43490 Y56.10764
G01 X79.44722 Y56.24977
G01 X79.44999 Y56.29405
G01 X79.44722 Y56.33839
G01 X79.43488 Y56.48056
G01 X79.43262 Y56.49453
G01 X79.41928 Y56.56077
G01 X79.41415 Y56.58101
G01 X79.39251 Y56.66250
G01 X79.36869 Y56.73113
G01 X79.33559 Y56.81320
G01 X79.32474 Y56.83672
G01 X79.26112 Y56.95122
G01 X79.23239 Y56.99933
G01 X79.21232 Y57.02508
G01 X79.11519 Y57.14512
G01 X79.11354 Y57.14688
G01 X79.04974 Y57.20834
G01 X78.97742 Y57.27146
G01 X78.92863 Y57.30801
G01 X78.85528 Y57.35752
G01 X78.82317 Y57.37697
G01 X78.71674 Y57.43100
G01 X78.65525 Y57.45937
G01 X78.63539 Y57.46570
G01 X78.61446 Y57.47210
G01 X78.61372 Y57.47233
G01 X78.48980 Y57.52003
G01 X78.48820 Y57.52079
G01 X78.42452 Y57.54792
G01 X78.40112 Y57.55691
G01 X78.37608 Y57.56890
G01 X78.37095 Y57.57136
G01 X78.34352 Y57.59356
G01 X78.28347 Y57.66476
G01 X78.23801 Y57.74606
G01 X78.20984 Y57.81002
G01 X78.18055 Y57.89849
G01 X78.16854 Y57.99092
G01 X78.17425 Y58.08393
G01 X78.18515 Y58.15294
G01 X78.19165 Y58.17796
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.55388 Y60.41017 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.55388 Y60.41017
G01 X77.63671 Y60.39371
G01 X77.78677 Y60.34819
G01 X77.87552 Y60.31141
G01 X78.01382 Y60.23750
G01 X78.09371 Y60.18413
G01 X78.19211 Y60.10336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.10242 Y60.23983 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.10242 Y60.23983
G01 X80.09619 Y60.21700
G01 X80.08530 Y60.17491
G01 X80.07503 Y60.13066
G01 X80.07305 Y60.11121
G01 X80.07194 Y60.06589
G01 X80.07194 Y58.46590
G01 X80.07305 Y58.42056
G01 X80.07503 Y58.40103
G01 X80.08004 Y58.37817
G01 X80.10069 Y58.30405
G01 X80.14349 Y58.22003
G01 X80.20290 Y58.14665
G01 X80.23284 Y58.12086
G01 X80.27633 Y58.08721
G01 X80.31700 Y58.06509
G01 X80.36038 Y58.04439
G01 X80.45733 Y58.01873
G01 X80.47684 Y58.01678
G01 X80.52215 Y58.01563
G01 X82.12220 Y58.01563
G01 X82.16751 Y58.01678
G01 X82.18702 Y58.01873
G01 X82.28397 Y58.04439
G01 X82.36802 Y58.08721
G01 X82.44145 Y58.14665
G01 X82.50084 Y58.21998
G01 X82.54369 Y58.30405
G01 X82.56931 Y58.40103
G01 X82.57130 Y58.42053
G01 X82.57244 Y58.46590
G01 X82.57244 Y60.06589
G01 X82.57130 Y60.11121
G01 X82.56931 Y60.13066
G01 X82.55905 Y60.17491
G01 X82.52596 Y60.30278
G01 X82.50729 Y60.36528
G01 X82.50571 Y60.37057
G01 X82.50579 Y60.37313
G01 X82.51684 Y60.46551
G01 X82.54516 Y60.55416
G01 X82.55443 Y60.57583
G01 X82.57488 Y60.61794
G01 X82.60805 Y60.67867
G01 X82.67851 Y60.86762
G01 X82.72138 Y61.06470
G01 X82.73579 Y61.26587
G01 X82.73015 Y61.34451
G01 X82.60983 Y61.22416
G01 X82.60983 Y61.21784
G01 X82.59446 Y61.06175
G01 X82.57572 Y60.96754
G01 X82.53020 Y60.81748
G01 X82.49344 Y60.72873
G01 X82.41951 Y60.59043
G01 X82.36614 Y60.51055
G01 X82.35321 Y60.49480
G01 X82.19075 Y60.45164
G01 X82.12220 Y60.42632
G01 X82.11483 Y60.42365
G01 X81.95799 Y60.36752
G01 X81.90063 Y60.35007
G01 X81.74379 Y60.31078
G01 X81.69667 Y60.30140
G01 X81.53985 Y60.27814
G01 X81.49865 Y60.27407
G01 X81.34183 Y60.26635
G01 X81.30254 Y60.26635
G01 X81.14570 Y60.27407
G01 X81.10450 Y60.27814
G01 X80.94768 Y60.30140
G01 X80.90056 Y60.31078
G01 X80.74371 Y60.35007
G01 X80.68636 Y60.36752
G01 X80.52952 Y60.42365
G01 X80.52215 Y60.42632
G01 X80.45360 Y60.45164
G01 X80.29119 Y60.49477
G01 X80.27823 Y60.51055
G01 X80.22487 Y60.59043
G01 X80.15093 Y60.72873
G01 X80.13975 Y60.75573
G01 X80.11418 Y60.81748
G01 X80.06866 Y60.96754
G01 X80.04991 Y61.06175
G01 X80.03455 Y61.21784
G01 X80.03455 Y61.22413
G01 X79.91420 Y61.34451
G01 X79.90722 Y61.24679
G01 X79.90691 Y61.24542
G01 X79.91171 Y61.22205
G01 X79.92296 Y61.06470
G01 X79.96584 Y60.86762
G01 X80.03630 Y60.67867
G01 X80.06947 Y60.61794
G01 X80.11827 Y60.48708
G01 X80.13310 Y60.41880
G01 X80.13917 Y60.36803
G01 X80.10242 Y60.23983
G01 X80.13909 Y60.36772
G01 X80.17569 Y60.41235
G01 X80.24996 Y60.47329
G01 X80.29050 Y60.49495
G01 X80.45360 Y60.45164
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.19075 Y60.45164 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.19075 Y60.45164
G01 X82.35385 Y60.49495
G01 X82.39441 Y60.47329
G01 X82.46868 Y60.41235
G01 X82.50729 Y60.36528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.24356 Y62.67387 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.24356 Y62.67387
G01 X81.32217 Y62.67948
G01 X81.40079 Y62.67387
G01 X81.32217 Y62.59525
G01 X81.24356 Y62.67387
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.14892 Y64.83198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.14892 Y64.83198
G01 X80.15007 Y64.78674
G01 X80.15202 Y64.76721
G01 X80.17117 Y64.69108
G01 X80.17770 Y64.67015
G01 X80.22055 Y64.58603
G01 X80.27991 Y64.51275
G01 X80.30562 Y64.49047
G01 X80.35327 Y64.45334
G01 X80.43739 Y64.41049
G01 X80.53439 Y64.38483
G01 X80.55393 Y64.38288
G01 X80.59916 Y64.38174
G01 X82.29916 Y64.38174
G01 X82.34442 Y64.38288
G01 X82.36396 Y64.38483
G01 X82.46098 Y64.41049
G01 X82.54506 Y64.45334
G01 X82.61841 Y64.51275
G01 X82.67782 Y64.58608
G01 X82.72067 Y64.67020
G01 X82.74633 Y64.76721
G01 X82.74828 Y64.78674
G01 X82.74943 Y64.83198
G01 X82.74943 Y66.53197
G01 X82.74828 Y66.57724
G01 X82.74633 Y66.59677
G01 X82.72067 Y66.69380
G01 X82.69718 Y66.74256
G01 X82.67782 Y66.77790
G01 X82.65395 Y66.80929
G01 X82.61841 Y66.85125
G01 X82.54513 Y66.91061
G01 X82.46213 Y66.95298
G01 X82.46098 Y66.95349
G01 X82.43502 Y66.96149
G01 X82.36398 Y66.97914
G01 X82.34440 Y66.98110
G01 X82.29916 Y66.98224
G01 X80.59916 Y66.98224
G01 X80.55390 Y66.98110
G01 X80.53439 Y66.97914
G01 X80.43739 Y66.95349
G01 X80.35327 Y66.91064
G01 X80.27994 Y66.85123
G01 X80.22053 Y66.77790
G01 X80.17768 Y66.69377
G01 X80.15202 Y66.59677
G01 X80.15007 Y66.57724
G01 X80.14892 Y66.53197
G01 X80.14892 Y64.83198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.08873 Y65.72227 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.08873 Y65.72227
G01 X78.07468 Y65.70350
G01 X78.01382 Y65.66286
G01 X77.87552 Y65.58892
G01 X77.78677 Y65.55217
G01 X77.63671 Y65.50665
G01 X77.55388 Y65.49017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.08952 Y65.25908 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.08952 Y65.25908
G01 X78.07837 Y65.27340
G01 X78.06069 Y65.31470
G01 X78.04093 Y65.40569
G01 X78.03869 Y65.49875
G01 X78.04367 Y65.56842
G01 X78.05624 Y65.64902
G01 X78.07412 Y65.70279
G01 X78.07461 Y65.70345
G01 X78.08873 Y65.72227
G01 X78.14034 Y65.78547
G01 X78.17583 Y65.82534
G01 X78.19226 Y65.84333
G01 X78.24222 Y65.89657
G01 X78.25294 Y65.90817
G01 X78.27816 Y65.93599
G01 X78.35236 Y66.02948
G01 X78.37903 Y66.06484
G01 X78.40148 Y66.10299
G01 X78.45947 Y66.20734
G01 X78.47552 Y66.24124
G01 X78.50940 Y66.32306
G01 X78.52205 Y66.35839
G01 X78.55482 Y66.47317
G01 X78.56592 Y66.51600
G01 X78.57207 Y66.55991
G01 X78.58289 Y66.65410
G01 X78.58571 Y66.67848
G01 X78.58753 Y66.71595
G01 X78.58753 Y66.80441
G01 X78.58571 Y66.84193
G01 X78.57207 Y66.96047
G01 X78.56592 Y67.00434
G01 X78.55479 Y67.04724
G01 X78.52203 Y67.16205
G01 X78.50940 Y67.19733
G01 X78.49929 Y67.22422
G01 X78.47552 Y67.27909
G01 X78.45947 Y67.31305
G01 X78.40150 Y67.41737
G01 X78.37903 Y67.45557
G01 X78.35233 Y67.49095
G01 X78.27819 Y67.58440
G01 X78.25291 Y67.61223
G01 X78.19038 Y67.67477
G01 X78.16254 Y67.69999
G01 X78.06907 Y67.77419
G01 X78.03371 Y67.80086
G01 X77.99556 Y67.82328
G01 X77.89124 Y67.88127
G01 X77.85731 Y67.89732
G01 X77.77552 Y67.93123
G01 X77.74017 Y67.94386
G01 X77.62543 Y67.97662
G01 X77.58251 Y67.98775
G01 X77.53867 Y67.99387
G01 X77.42013 Y68.00751
G01 X77.38261 Y68.00936
G01 X77.33839 Y68.01043
G01 X76.53839 Y68.01043
G01 X76.49414 Y68.00936
G01 X76.45663 Y68.00751
G01 X76.33809 Y67.99387
G01 X76.29422 Y67.98772
G01 X76.25132 Y67.97662
G01 X76.22546 Y67.96923
G01 X76.13656 Y67.94386
G01 X76.10123 Y67.93123
G01 X76.01944 Y67.89732
G01 X75.98553 Y67.88130
G01 X75.88119 Y67.82328
G01 X75.84304 Y67.80083
G01 X75.80768 Y67.77419
G01 X75.71421 Y67.69997
G01 X75.68637 Y67.67477
G01 X75.62384 Y67.61223
G01 X75.59856 Y67.58435
G01 X75.52442 Y67.49095
G01 X75.49773 Y67.45554
G01 X75.47525 Y67.41737
G01 X75.41728 Y67.31305
G01 X75.40123 Y67.27909
G01 X75.36735 Y67.19733
G01 X75.35472 Y67.16199
G01 X75.32196 Y67.04724
G01 X75.31083 Y67.00434
G01 X75.30469 Y66.96047
G01 X75.29105 Y66.84193
G01 X75.28922 Y66.80441
G01 X75.28922 Y66.71595
G01 X75.29105 Y66.67845
G01 X75.30469 Y66.55991
G01 X75.31083 Y66.51602
G01 X75.32193 Y66.47317
G01 X75.35231 Y66.36682
G01 X75.35472 Y66.35834
G01 X75.36735 Y66.32306
G01 X75.40123 Y66.24124
G01 X75.41731 Y66.20728
G01 X75.47527 Y66.10299
G01 X75.49773 Y66.06484
G01 X75.52440 Y66.02948
G01 X75.59859 Y65.93599
G01 X75.62381 Y65.90817
G01 X75.63453 Y65.89657
G01 X75.68449 Y65.84333
G01 X75.72269 Y65.80000
G01 X75.76808 Y65.74518
G01 X75.78724 Y65.72131
G01 X75.79839 Y65.70693
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.34918 Y70.64398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.34918 Y70.64398
G01 X80.36813 Y70.61929
G01 X80.50348 Y70.48393
G01 X80.65316 Y70.36907
G01 X80.65316 Y70.52465
G01 X80.55629 Y70.60415
G01 X80.51646 Y70.64398
G01 X80.34918 Y70.64398
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.53335 Y70.36920 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.53335 Y70.36920
G01 X82.53340 Y70.52480
G01 X82.63007 Y70.60415
G01 X82.66990 Y70.64398
G01 X82.83718 Y70.64398
G01 X82.81821 Y70.61926
G01 X82.68288 Y70.48393
G01 X82.53335 Y70.36920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.19581 Y72.83399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.19581 Y72.83399
G01 X82.27445 Y72.80140
G01 X82.42141 Y72.72287
G01 X82.50127 Y72.66950
G01 X82.63007 Y72.56379
G01 X82.66990 Y72.52399
G01 X82.83718 Y72.52399
G01 X82.81826 Y72.54865
G01 X82.80909 Y72.55782
G01 X82.72532 Y72.66971
G01 X82.69184 Y72.73105
G01 X82.65519 Y72.81664
G01 X82.63543 Y72.90763
G01 X82.63320 Y73.00069
G01 X82.63817 Y73.07036
G01 X82.64780 Y73.12335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.64046 Y75.13287 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.64046 Y75.13287
G01 X80.68509 Y75.16950
G01 X80.76497 Y75.22286
G01 X80.91191 Y75.30142
G01 X80.99050 Y75.33399
G01 X82.19581 Y75.33399
G01 X82.27445 Y75.36652
G01 X82.42141 Y75.44509
G01 X82.50127 Y75.49845
G01 X82.54579 Y75.53500
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.19581 Y75.33399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.19581 Y75.33399
G01 X82.27445 Y75.30142
G01 X82.42141 Y75.22286
G01 X82.50127 Y75.16950
G01 X82.54318 Y75.13511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.46484 Y72.70808 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.46484 Y72.70808
G01 X86.46545 Y72.69884
G01 X86.47429 Y72.66584
G01 X86.48318 Y72.65043
G01 X86.49577 Y72.63783
G01 X86.51122 Y72.62891
G01 X86.52841 Y72.62432
G01 X86.54624 Y72.62432
G01 X86.56344 Y72.62891
G01 X86.57888 Y72.63783
G01 X86.59151 Y72.65045
G01 X86.60042 Y72.66590
G01 X86.60921 Y72.69874
G01 X86.60982 Y72.70801
G01 X86.60982 Y74.27234
G01 X86.61924 Y74.36795
G01 X86.64713 Y74.45987
G01 X86.69240 Y74.54458
G01 X86.75333 Y74.61885
G01 X86.82760 Y74.67978
G01 X86.91231 Y74.72505
G01 X87.00423 Y74.75294
G01 X87.09984 Y74.76236
G01 X88.23565 Y74.76236
G01 X88.24482 Y74.76294
G01 X88.25312 Y74.76518
G01 X88.28147 Y74.77186
G01 X88.28983 Y74.77359
G01 X88.29839 Y74.77719
G01 X88.69828 Y74.97714
G01 X88.72211 Y74.99109
G01 X88.74281 Y75.00922
G01 X88.93440 Y75.20082
G01 X88.95254 Y75.22152
G01 X88.96648 Y75.24534
G01 X89.16643 Y75.64524
G01 X89.17001 Y75.65370
G01 X89.17169 Y75.66195
G01 X89.17847 Y75.69071
G01 X89.18066 Y75.69881
G01 X89.18126 Y75.70818
G01 X89.18126 Y76.31867
G01 X89.18063 Y76.32817
G01 X89.17842 Y76.33642
G01 X89.17177 Y76.36472
G01 X89.17004 Y76.37308
G01 X89.16643 Y76.38164
G01 X88.96651 Y76.78148
G01 X88.95256 Y76.80531
G01 X88.93438 Y76.82606
G01 X88.74281 Y77.01765
G01 X88.72211 Y77.03579
G01 X88.69828 Y77.04973
G01 X88.29839 Y77.24966
G01 X88.28980 Y77.25329
G01 X88.28167 Y77.25494
G01 X88.25292 Y77.26172
G01 X88.24484 Y77.26390
G01 X88.23565 Y77.26449
G01 X86.55333 Y77.26449
G01 X86.54406 Y77.26388
G01 X86.51122 Y77.25509
G01 X86.49577 Y77.24618
G01 X86.48318 Y77.23358
G01 X86.47429 Y77.21816
G01 X86.46545 Y77.18516
G01 X86.46484 Y77.17592
G01 X86.46484 Y72.70808
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.60982 Y75.39733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.60982 Y75.39733
G01 X86.61924 Y75.30175
G01 X86.64713 Y75.20983
G01 X86.69240 Y75.12512
G01 X86.75333 Y75.05085
G01 X86.82760 Y74.98992
G01 X86.91231 Y74.94466
G01 X87.00423 Y74.91677
G01 X87.09984 Y74.90734
G01 X88.11883 Y74.90734
G01 X88.23141 Y74.92045
G01 X88.33798 Y74.95908
G01 X88.56615 Y75.07318
G01 X88.63351 Y75.11395
G01 X88.69348 Y75.16495
G01 X88.77867 Y75.25014
G01 X88.82968 Y75.31014
G01 X88.87045 Y75.37750
G01 X88.98452 Y75.60564
G01 X89.02315 Y75.71219
G01 X89.03626 Y75.82477
G01 X89.03626 Y76.20206
G01 X89.02315 Y76.31463
G01 X88.98454 Y76.42118
G01 X88.87047 Y76.64935
G01 X88.82970 Y76.71674
G01 X88.77867 Y76.77673
G01 X88.69348 Y76.86192
G01 X88.63349 Y76.91295
G01 X88.56610 Y76.95372
G01 X88.33793 Y77.06779
G01 X88.23138 Y77.10640
G01 X88.11883 Y77.11951
G01 X87.09984 Y77.11951
G01 X87.00423 Y77.11008
G01 X86.91231 Y77.08219
G01 X86.82760 Y77.03693
G01 X86.75333 Y76.97600
G01 X86.69240 Y76.90173
G01 X86.64713 Y76.81702
G01 X86.61924 Y76.72509
G01 X86.60982 Y76.62949
G01 X86.60982 Y75.39733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.67345 Y77.52042 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.67345 Y77.52042
G01 X82.63007 Y77.56380
G01 X82.50127 Y77.66949
G01 X82.42141 Y77.72286
G01 X82.37572 Y77.74729
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.70383 Y77.85593 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.70383 Y77.85593
G01 X82.68369 Y77.79324
G01 X82.66964 Y77.72479
G01 X82.65969 Y77.63215
G01 X82.66743 Y77.53932
G01 X82.67193 Y77.52329
G01 X82.68996 Y77.48933
G01 X82.70863 Y77.45580
G01 X82.74430 Y77.39469
G01 X82.77592 Y77.34430
G01 X82.79357 Y77.31806
G01 X82.82293 Y77.26891
G01 X82.88405 Y77.15893
G01 X82.90155 Y77.12199
G01 X82.91326 Y77.09616
G01 X82.93535 Y77.04033
G01 X82.94912 Y77.00185
G01 X82.98366 Y76.88087
G01 X82.99482 Y76.83792
G01 X83.00096 Y76.79406
G01 X83.01534 Y76.66901
G01 X83.01735 Y76.62822
G01 X83.01735 Y76.53975
G01 X83.01534 Y76.49896
G01 X83.00096 Y76.37391
G01 X82.99482 Y76.33005
G01 X82.98366 Y76.28710
G01 X82.94912 Y76.16612
G01 X82.93535 Y76.12764
G01 X82.90152 Y76.04600
G01 X82.88405 Y76.00904
G01 X82.82293 Y75.89906
G01 X82.80045 Y75.86083
G01 X82.77376 Y75.82545
G01 X82.69139 Y75.72167
G01 X82.66975 Y75.69525
G01 X82.64816 Y75.66784
G01 X82.61407 Y75.62705
G01 X82.61262 Y75.62545
G01 X82.54579 Y75.53500
G01 X82.53665 Y75.52261
G01 X82.52672 Y75.49276
G01 X82.51417 Y75.41222
G01 X82.50919 Y75.34255
G01 X82.51143 Y75.24948
G01 X82.53119 Y75.15850
G01 X82.53840 Y75.14168
G01 X82.54318 Y75.13511
G01 X82.58262 Y75.08095
G01 X82.61354 Y75.04364
G01 X82.62779 Y75.02599
G01 X82.66975 Y74.97272
G01 X82.69141 Y74.94628
G01 X82.77376 Y74.84252
G01 X82.80045 Y74.80714
G01 X82.82293 Y74.76891
G01 X82.88405 Y74.65896
G01 X82.90152 Y74.62197
G01 X82.93535 Y74.54034
G01 X82.94912 Y74.50186
G01 X82.98366 Y74.38088
G01 X82.99482 Y74.33793
G01 X83.00096 Y74.29406
G01 X83.01534 Y74.16902
G01 X83.01735 Y74.12822
G01 X83.01735 Y74.03976
G01 X83.01534 Y73.99896
G01 X83.00096 Y73.87392
G01 X82.99482 Y73.83005
G01 X82.98366 Y73.78710
G01 X82.94912 Y73.66612
G01 X82.93535 Y73.62764
G01 X82.90152 Y73.54601
G01 X82.88405 Y73.50902
G01 X82.82293 Y73.39907
G01 X82.80048 Y73.36086
G01 X82.78684 Y73.34235
G01 X82.77396 Y73.32528
G01 X82.74709 Y73.28779
G01 X82.72634 Y73.25726
G01 X82.68204 Y73.18515
G01 X82.64783 Y73.12337
G01 X82.64780 Y73.12335
G01 X82.64600 Y73.12007
G01 X82.63007 Y73.10415
G01 X82.50127 Y72.99846
G01 X82.42141 Y72.94509
G01 X82.27445 Y72.86653
G01 X82.19581 Y72.83399
G01 X82.01029 Y72.83397
G01 X81.26134 Y72.83397
G01 X81.17602 Y72.83399
G01 X80.99048 Y72.83399
G01 X80.91191 Y72.86653
G01 X80.76497 Y72.94509
G01 X80.68509 Y72.99846
G01 X80.55629 Y73.10415
G01 X80.54090 Y73.11956
G01 X80.54024 Y73.12063
G01 X80.50874 Y73.17311
G01 X80.50249 Y73.18367
G01 X80.47303 Y73.23422
G01 X80.41240 Y73.32528
G01 X80.39952 Y73.34235
G01 X80.38588 Y73.36084
G01 X80.36345 Y73.39902
G01 X80.30229 Y73.50905
G01 X80.28484 Y73.54595
G01 X80.25098 Y73.62772
G01 X80.23721 Y73.66615
G01 X80.21268 Y73.75213
G01 X80.20267 Y73.78715
G01 X80.19152 Y73.83008
G01 X80.18540 Y73.87392
G01 X80.17102 Y73.99896
G01 X80.16901 Y74.03976
G01 X80.16901 Y74.12822
G01 X80.17102 Y74.16902
G01 X80.18540 Y74.29406
G01 X80.19154 Y74.33790
G01 X80.20264 Y74.38083
G01 X80.23721 Y74.50181
G01 X80.25098 Y74.54026
G01 X80.28484 Y74.62203
G01 X80.30229 Y74.65893
G01 X80.36345 Y74.76896
G01 X80.38591 Y74.80717
G01 X80.41260 Y74.84252
G01 X80.49513 Y74.94651
G01 X80.51661 Y74.97275
G01 X80.53813 Y75.00003
G01 X80.57219 Y75.04080
G01 X80.57371 Y75.04255
G01 X80.64968 Y75.14534
G01 X80.67585 Y75.18075
G01 X80.71976 Y75.25212
G01 X80.73579 Y75.27750
G01 X80.76282 Y75.31910
G01 X80.77232 Y75.33399
G01 X80.73693 Y75.39264
G01 X80.67615 Y75.48758
G01 X80.64796 Y75.52629
G01 X80.64318 Y75.53282
G01 X80.64318 Y75.53284
G01 X80.60363 Y75.58712
G01 X80.57282 Y75.62433
G01 X80.55847 Y75.64209
G01 X80.51661 Y75.69523
G01 X80.49513 Y75.72146
G01 X80.41260 Y75.82545
G01 X80.38591 Y75.86081
G01 X80.36345 Y75.89901
G01 X80.30229 Y76.00904
G01 X80.28484 Y76.04595
G01 X80.25098 Y76.12771
G01 X80.23721 Y76.16617
G01 X80.20264 Y76.28715
G01 X80.19154 Y76.33007
G01 X80.18540 Y76.37391
G01 X80.17102 Y76.49896
G01 X80.16901 Y76.53975
G01 X80.16901 Y76.62822
G01 X80.17102 Y76.66901
G01 X80.18540 Y76.79406
G01 X80.19154 Y76.83790
G01 X80.20264 Y76.88082
G01 X80.23721 Y77.00180
G01 X80.25098 Y77.04026
G01 X80.28484 Y77.12202
G01 X80.30229 Y77.15893
G01 X80.36345 Y77.26896
G01 X80.39299 Y77.31834
G01 X80.40854 Y77.34145
G01 X80.41044 Y77.34430
G01 X80.42924 Y77.37196
G01 X80.49685 Y77.48895
G01 X80.51148 Y77.51897
G01 X80.55629 Y77.56380
G01 X80.68509 Y77.66949
G01 X80.76497 Y77.72286
G01 X80.81057 Y77.74727
G01 X80.82045 Y77.74925
G01 X80.86818 Y77.75994
G01 X80.92629 Y77.77452
G01 X81.01458 Y77.79212
G01 X81.18123 Y77.81684
G01 X81.26226 Y77.82484
G01 X81.42888 Y77.83302
G01 X81.46820 Y77.83398
G01 X81.71819 Y77.83398
G01 X81.75748 Y77.83302
G01 X81.92410 Y77.82484
G01 X82.00516 Y77.81684
G01 X82.17178 Y77.79212
G01 X82.25999 Y77.77452
G01 X82.31818 Y77.75994
G01 X82.36589 Y77.74925
G01 X82.37572 Y77.74729
G01 X82.41498 Y77.75113
G01 X82.50919 Y77.76987
G01 X82.55611 Y77.78410
G01 X82.64485 Y77.82088
G01 X82.68806 Y77.84396
G01 X82.70122 Y77.85275
G01 X82.70383 Y77.85593
G01 X82.75298 Y77.91567
G01 X82.78560 Y77.95324
G01 X82.79710 Y77.96583
G01 X82.82146 Y77.99352
G01 X82.84424 Y78.02049
G01 X82.85707 Y78.03535
G01 X82.87472 Y78.05887
G01 X82.92441 Y78.13233
G01 X82.93076 Y78.14277
G01 X82.94689 Y78.17589
G01 X82.98163 Y78.25712
G01 X82.98311 Y78.26111
G01 X82.99474 Y78.30437
G01 X83.01346 Y78.39067
G01 X83.01374 Y78.39225
G01 X83.01679 Y78.42862
G01 X83.01732 Y78.43954
G01 X83.01844 Y78.48397
G01 X83.01844 Y79.68399
G01 X83.01732 Y79.72839
G01 X83.01679 Y79.73934
G01 X83.01374 Y79.77574
G01 X83.01346 Y79.77729
G01 X82.99474 Y79.86362
G01 X82.98311 Y79.90685
G01 X82.98161 Y79.91086
G01 X82.94689 Y79.99209
G01 X82.93076 Y80.02519
G01 X82.92441 Y80.03565
G01 X82.87470 Y80.10911
G01 X82.85760 Y80.13192
G01 X82.84379 Y80.14713
G01 X82.78123 Y80.20970
G01 X82.76609 Y80.22344
G01 X82.74318 Y80.24061
G01 X82.68288 Y80.28216
G01 X82.67010 Y80.29006
G01 X82.65941 Y80.29656
G01 X82.62657 Y80.31257
G01 X82.54498 Y80.34746
G01 X82.54104 Y80.34894
G01 X82.49774 Y80.36057
G01 X82.41125 Y80.37932
G01 X82.40988 Y80.37954
G01 X82.37348 Y80.38262
G01 X82.36238 Y80.38315
G01 X82.31818 Y80.38424
G01 X80.86818 Y80.38424
G01 X80.82395 Y80.38315
G01 X80.81288 Y80.38262
G01 X80.77646 Y80.37954
G01 X80.77508 Y80.37932
G01 X80.68855 Y80.36055
G01 X80.64529 Y80.34894
G01 X80.64130 Y80.34744
G01 X80.55990 Y80.31262
G01 X80.52698 Y80.29659
G01 X80.51633 Y80.29011
G01 X80.44306 Y80.24053
G01 X80.42025 Y80.22341
G01 X80.40503 Y80.20962
G01 X80.34255 Y80.14713
G01 X80.32876 Y80.13192
G01 X80.31164 Y80.10911
G01 X80.26205 Y80.03583
G01 X80.25560 Y80.02519
G01 X80.23955 Y79.99227
G01 X80.20473 Y79.91086
G01 X80.20323 Y79.90683
G01 X80.19160 Y79.86362
G01 X80.17282 Y79.77706
G01 X80.17260 Y79.77574
G01 X80.16955 Y79.73934
G01 X80.16901 Y79.72816
G01 X80.16792 Y79.68399
G01 X80.16792 Y78.48397
G01 X80.16901 Y78.43977
G01 X80.16955 Y78.42862
G01 X80.17260 Y78.39225
G01 X80.17282 Y78.39090
G01 X80.19160 Y78.30437
G01 X80.20323 Y78.26113
G01 X80.20473 Y78.25712
G01 X80.23955 Y78.17571
G01 X80.25560 Y78.14277
G01 X80.26205 Y78.13215
G01 X80.30668 Y78.06553
G01 X80.31164 Y78.05885
G01 X80.32934 Y78.03530
G01 X80.34212 Y78.02049
G01 X80.39972 Y77.95222
G01 X80.40544 Y77.94539
G01 X80.43160 Y77.91379
G01 X80.45126 Y77.89080
G01 X80.48255 Y77.85532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.81057 Y77.74727 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.81057 Y77.74727
G01 X80.77138 Y77.75113
G01 X80.67717 Y77.76987
G01 X80.63028 Y77.78410
G01 X80.54153 Y77.82088
G01 X80.49830 Y77.84396
G01 X80.48436 Y77.85329
G01 X80.48255 Y77.85532
G01 X80.50102 Y77.81221
G01 X80.52086 Y77.72110
G01 X80.52304 Y77.62789
G01 X80.51804 Y77.55819
G01 X80.51057 Y77.51709
G01 X80.51057 Y77.51707
G01 X80.49685 Y77.48895
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.64318 Y75.53282 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.64318 Y75.53282
G01 X80.68509 Y75.49845
G01 X80.76497 Y75.44509
G01 X80.91191 Y75.36652
G01 X80.99050 Y75.33399
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.99048 Y72.83399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.99048 Y72.83399
G01 X80.91191 Y72.80140
G01 X80.76497 Y72.72287
G01 X80.68509 Y72.66950
G01 X80.55629 Y72.56379
G01 X80.51649 Y72.52399
G01 X80.34918 Y72.52399
G01 X80.36813 Y72.54867
G01 X80.37742 Y72.55795
G01 X80.42502 Y72.61327
G01 X80.44687 Y72.64283
G01 X80.47608 Y72.69292
G01 X80.50033 Y72.73455
G01 X80.53279 Y72.83564
G01 X80.54681 Y72.90407
G01 X80.55675 Y72.99660
G01 X80.54902 Y73.08936
G01 X80.54024 Y73.12063
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.54338 Y76.82164 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.54338 Y76.82164
G01 X71.59898 Y76.81615
G01 X71.69090 Y76.78826
G01 X71.77561 Y76.74300
G01 X71.84988 Y76.68207
G01 X71.91081 Y76.60780
G01 X71.95608 Y76.52309
G01 X71.98397 Y76.43117
G01 X71.98945 Y76.37559
G01 X72.11338 Y76.37559
G01 X72.11338 Y76.40114
G01 X72.08706 Y76.52217
G01 X72.04119 Y76.62924
G01 X71.97589 Y76.72573
G01 X71.89352 Y76.80810
G01 X71.79702 Y76.87341
G01 X71.68996 Y76.91928
G01 X71.56890 Y76.94559
G01 X71.54338 Y76.94559
G01 X71.54338 Y76.82164
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.54338 Y73.92558 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.54338 Y73.92558
G01 X71.56893 Y73.92558
G01 X71.68996 Y73.95190
G01 X71.79702 Y73.99777
G01 X71.89352 Y74.06307
G01 X71.97589 Y74.14545
G01 X72.04119 Y74.24194
G01 X72.08706 Y74.34900
G01 X72.11338 Y74.47003
G01 X72.11338 Y74.49558
G01 X71.98945 Y74.49558
G01 X71.98397 Y74.43998
G01 X71.95608 Y74.34806
G01 X71.91081 Y74.26335
G01 X71.84988 Y74.18908
G01 X71.77561 Y74.12815
G01 X71.69090 Y74.08288
G01 X71.59898 Y74.05500
G01 X71.54338 Y74.04951
G01 X71.54338 Y73.92558
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.21336 Y76.21222 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.21336 Y76.21222
G01 X69.19047 Y76.24643
G01 X69.07856 Y76.38283
G01 X69.01064 Y76.45075
G01 X68.87424 Y76.56266
G01 X68.83089 Y76.59164
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.21333 Y74.65891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.21333 Y74.65891
G01 X69.21339 Y74.53556
G01 X69.22281 Y74.43998
G01 X69.25070 Y74.34806
G01 X69.29596 Y74.26335
G01 X69.35690 Y74.18908
G01 X69.43116 Y74.12815
G01 X69.51587 Y74.08288
G01 X69.60780 Y74.05500
G01 X69.66337 Y74.04951
G01 X69.66337 Y73.92558
G01 X69.63782 Y73.92558
G01 X69.51679 Y73.95190
G01 X69.40973 Y73.99777
G01 X69.31323 Y74.06307
G01 X69.27041 Y74.10592
G01 X69.25418 Y74.12142
G01 X69.24577 Y74.12909
G01 X69.23713 Y74.13572
G01 X69.18146 Y74.17864
G01 X69.10985 Y74.21690
G01 X69.04572 Y74.24461
G01 X68.95710 Y74.27326
G01 X68.86467 Y74.28464
G01 X68.83653 Y74.28271
G01 X68.78796 Y74.26703
G01 X68.83493 Y74.28220
G01 X68.87424 Y74.30849
G01 X69.01064 Y74.42040
G01 X69.07856 Y74.48832
G01 X69.19047 Y74.62472
G01 X69.21333 Y74.65891
G01 X69.22956 Y74.71225
G01 X69.27376 Y74.88867
G01 X69.29022 Y74.97120
G01 X69.31638 Y75.14765
G01 X69.32380 Y75.22279
G01 X69.33249 Y75.39921
G01 X69.33249 Y75.47193
G01 X69.32382 Y75.64836
G01 X69.31638 Y75.72352
G01 X69.29022 Y75.89998
G01 X69.27376 Y75.98250
G01 X69.22956 Y76.15893
G01 X69.21336 Y76.21222
G01 X69.21339 Y76.33559
G01 X69.22281 Y76.43117
G01 X69.25070 Y76.52309
G01 X69.29596 Y76.60780
G01 X69.35690 Y76.68207
G01 X69.43116 Y76.74300
G01 X69.51587 Y76.78826
G01 X69.60780 Y76.81615
G01 X69.66337 Y76.82164
G01 X69.66337 Y76.94559
G01 X69.63782 Y76.94559
G01 X69.51679 Y76.91928
G01 X69.40973 Y76.87341
G01 X69.31323 Y76.80810
G01 X69.27041 Y76.76525
G01 X69.15865 Y76.68164
G01 X69.09731 Y76.64816
G01 X69.01171 Y76.61151
G01 X68.92073 Y76.59174
G01 X68.83663 Y76.58974
G01 X68.83089 Y76.59164
G01 X68.82786 Y76.59266
G01 X68.78842 Y76.60495
G01 X68.75933 Y76.61336
G01 X68.62075 Y76.66553
G01 X68.61552 Y76.66800
G01 X68.60518 Y76.67280
G01 X68.58674 Y76.68120
G01 X68.55730 Y76.69403
G01 X68.53909 Y76.69980
G01 X68.37038 Y76.75143
G01 X68.36414 Y76.75331
G01 X68.28319 Y76.76716
G01 X68.16429 Y76.78197
G01 X68.10765 Y76.78476
G01 X68.01915 Y76.78476
G01 X67.96246 Y76.78197
G01 X67.84359 Y76.76716
G01 X67.76261 Y76.75331
G01 X67.75636 Y76.75143
G01 X67.58766 Y76.69980
G01 X67.56945 Y76.69403
G01 X67.50630 Y76.66497
G01 X67.38819 Y76.60500
G01 X67.35050 Y76.58217
G01 X67.27712 Y76.53264
G01 X67.22167 Y76.49111
G01 X67.14085 Y76.42057
G01 X67.07712 Y76.35916
G01 X67.07288 Y76.35464
G01 X66.96579 Y76.22228
G01 X66.94623 Y76.19723
G01 X66.91700 Y76.14834
G01 X66.84656 Y76.02157
G01 X66.83335 Y75.99299
G01 X66.80028 Y75.91097
G01 X66.77338 Y75.83350
G01 X66.74910 Y75.74211
G01 X66.73061 Y75.65550
G01 X66.72759 Y75.63693
G01 X66.71397 Y75.47983
G01 X66.71123 Y75.43559
G01 X66.71397 Y75.39129
G01 X66.72759 Y75.23424
G01 X66.73061 Y75.21567
G01 X66.74910 Y75.12906
G01 X66.77338 Y75.03767
G01 X66.80028 Y74.96020
G01 X66.83338 Y74.87818
G01 X66.84656 Y74.84961
G01 X66.91700 Y74.72284
G01 X66.94626 Y74.67392
G01 X66.96579 Y74.64890
G01 X67.06157 Y74.53051
G01 X67.07285 Y74.51656
G01 X67.07712 Y74.51202
G01 X67.14085 Y74.45060
G01 X67.22169 Y74.38004
G01 X67.27712 Y74.33854
G01 X67.35050 Y74.28901
G01 X67.38819 Y74.26617
G01 X67.50630 Y74.20620
G01 X67.56945 Y74.17714
G01 X67.58766 Y74.17138
G01 X67.75636 Y74.11974
G01 X67.76261 Y74.11786
G01 X67.84359 Y74.10402
G01 X67.96246 Y74.08921
G01 X68.01915 Y74.08642
G01 X68.10765 Y74.08642
G01 X68.16429 Y74.08921
G01 X68.28319 Y74.10402
G01 X68.36414 Y74.11786
G01 X68.37038 Y74.11974
G01 X68.53909 Y74.17138
G01 X68.55730 Y74.17714
G01 X68.58674 Y74.18997
G01 X68.62080 Y74.20552
G01 X68.70729 Y74.23978
G01 X68.77435 Y74.26254
G01 X68.78796 Y74.26703
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.54696 Y79.14399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.54696 Y79.14399
G01 X59.54973 Y79.18828
G01 X59.56205 Y79.33042
G01 X59.56433 Y79.34444
G01 X59.58280 Y79.43093
G01 X59.60444 Y79.51244
G01 X59.62826 Y79.58105
G01 X59.66136 Y79.66311
G01 X59.67221 Y79.68663
G01 X59.73583 Y79.80114
G01 X59.76456 Y79.84924
G01 X59.78463 Y79.87500
G01 X59.88176 Y79.99504
G01 X59.88341 Y79.99679
G01 X59.94721 Y80.05826
G01 X60.01955 Y80.12140
G01 X60.06832 Y80.15793
G01 X60.14167 Y80.20743
G01 X60.17378 Y80.22689
G01 X60.28021 Y80.28092
G01 X60.34165 Y80.30926
G01 X60.36164 Y80.31564
G01 X60.51162 Y80.36151
G01 X60.52046 Y80.36418
G01 X60.59864 Y80.37741
G01 X60.70553 Y80.39072
G01 X60.75470 Y80.39316
G01 X60.84330 Y80.39316
G01 X60.89242 Y80.39072
G01 X60.98996 Y80.37858
G01 X60.99930 Y80.37741
G01 X61.07749 Y80.36418
G01 X61.08632 Y80.36151
G01 X61.23631 Y80.31564
G01 X61.25630 Y80.30926
G01 X61.31774 Y80.28092
G01 X61.42417 Y80.22689
G01 X61.45628 Y80.20743
G01 X61.52963 Y80.15793
G01 X61.57842 Y80.12138
G01 X61.65074 Y80.05826
G01 X61.71454 Y79.99679
G01 X61.71619 Y79.99504
G01 X61.81332 Y79.87500
G01 X61.83339 Y79.84924
G01 X61.86212 Y79.80114
G01 X61.92574 Y79.68663
G01 X61.93659 Y79.66311
G01 X61.96969 Y79.58105
G01 X61.99351 Y79.51244
G01 X62.01515 Y79.43093
G01 X62.03362 Y79.34444
G01 X62.03590 Y79.33042
G01 X62.04822 Y79.18828
G01 X62.05099 Y79.14399
G01 X62.04822 Y79.09966
G01 X62.03590 Y78.95755
G01 X62.03362 Y78.94353
G01 X62.01515 Y78.85704
G01 X61.99351 Y78.77553
G01 X61.96969 Y78.70693
G01 X61.93659 Y78.62486
G01 X61.92574 Y78.60134
G01 X61.86212 Y78.48684
G01 X61.83339 Y78.43873
G01 X61.81332 Y78.41298
G01 X61.71619 Y78.29293
G01 X61.71454 Y78.29118
G01 X61.65074 Y78.22971
G01 X61.57842 Y78.16660
G01 X61.52963 Y78.13004
G01 X61.45628 Y78.08054
G01 X61.42417 Y78.06108
G01 X61.31774 Y78.00706
G01 X61.25630 Y77.97871
G01 X61.23631 Y77.97234
G01 X61.08632 Y77.92646
G01 X61.07749 Y77.92380
G01 X60.99930 Y77.91056
G01 X60.89242 Y77.89725
G01 X60.84330 Y77.89482
G01 X60.75470 Y77.89482
G01 X60.70553 Y77.89725
G01 X60.59864 Y77.91056
G01 X60.52046 Y77.92380
G01 X60.51162 Y77.92646
G01 X60.36164 Y77.97234
G01 X60.34165 Y77.97871
G01 X60.28021 Y78.00706
G01 X60.17375 Y78.06111
G01 X60.14167 Y78.08054
G01 X60.06832 Y78.13004
G01 X60.01952 Y78.16660
G01 X59.94721 Y78.22971
G01 X59.88341 Y78.29118
G01 X59.88176 Y78.29293
G01 X59.78463 Y78.41298
G01 X59.76456 Y78.43873
G01 X59.73583 Y78.48684
G01 X59.67221 Y78.60134
G01 X59.66136 Y78.62486
G01 X59.62826 Y78.70693
G01 X59.60444 Y78.77553
G01 X59.58280 Y78.85704
G01 X59.56433 Y78.94353
G01 X59.56205 Y78.95755
G01 X59.54973 Y79.09966
G01 X59.54696 Y79.14399
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.47668 Y77.04196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.47668 Y77.04196
G01 X57.10175 Y77.04196
G01 X57.10175 Y75.12949
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.47912 Y77.04196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.47912 Y77.04196
G01 X55.17978 Y76.94216
G01 X55.12705 Y76.92113
G01 X55.11659 Y76.91623
G01 X55.02017 Y76.85664
G01 X55.01110 Y76.84948
G01 X54.96871 Y76.81171
G01 X54.68298 Y76.52598
G01 X54.65624 Y76.49703
G01 X54.65103 Y76.49091
G01 X54.60501 Y76.42703
G01 X54.60084 Y76.42014
G01 X54.58182 Y76.38565
G01 X54.43897 Y76.09992
G01 X54.41768 Y76.05078
G01 X54.41390 Y76.04056
G01 X54.39807 Y75.98941
G01 X54.25522 Y75.41799
G01 X54.24428 Y75.35901
G01 X54.24278 Y75.34687
G01 X54.23912 Y75.28700
G01 X54.23912 Y74.85842
G01 X54.24278 Y74.79858
G01 X54.24428 Y74.78644
G01 X54.25522 Y74.72746
G01 X54.39807 Y74.15604
G01 X54.41390 Y74.10488
G01 X54.41768 Y74.09465
G01 X54.43897 Y74.04552
G01 X54.58182 Y73.75982
G01 X54.60084 Y73.72530
G01 X54.60501 Y73.71845
G01 X54.65106 Y73.65456
G01 X54.65626 Y73.64844
G01 X54.68298 Y73.61949
G01 X54.74623 Y73.55622
G01 X54.96871 Y73.33376
G01 X55.01110 Y73.29599
G01 X55.02017 Y73.28883
G01 X55.11659 Y73.22924
G01 X55.12705 Y73.22434
G01 X55.17978 Y73.20331
G01 X55.47915 Y73.10351
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.36469 Y73.10351 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.36469 Y73.10351
G01 X57.10175 Y73.10351
G01 X57.10175 Y73.58736
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.19917 Y69.51784 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.19917 Y69.51784
G01 X53.19917 Y69.67609
G01 X53.32302 Y69.58104
G01 X53.47222 Y69.43184
G01 X53.60072 Y69.26438
G01 X53.70623 Y69.08160
G01 X53.73673 Y69.00799
G01 X53.60112 Y69.00799
G01 X53.52279 Y69.15455
G01 X53.46942 Y69.23443
G01 X53.34507 Y69.38594
G01 X53.27715 Y69.45386
G01 X53.19917 Y69.51784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.64955 Y67.24269 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.64955 Y67.24269
G01 X46.65018 Y67.24363
G01 X46.65326 Y67.24731
G01 X46.70888 Y67.43065
G01 X46.72760 Y67.52486
G01 X46.74683 Y67.71996
G01 X46.74919 Y67.76799
G01 X46.74919 Y68.36799
G01 X46.74683 Y68.41599
G01 X46.72760 Y68.61112
G01 X46.70888 Y68.70530
G01 X46.65397 Y68.88630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.36880 Y68.89328 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.36880 Y68.89328
G01 X47.36817 Y68.89234
G01 X47.36514 Y68.88871
G01 X47.30949 Y68.70530
G01 X47.29077 Y68.61112
G01 X47.27154 Y68.41599
G01 X47.26918 Y68.36799
G01 X47.26918 Y67.76799
G01 X47.27154 Y67.71996
G01 X47.29077 Y67.52486
G01 X47.30949 Y67.43065
G01 X47.36438 Y67.24965
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.06049 Y67.06916 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.06049 Y67.06916
G01 X50.08117 Y67.09065
G01 X50.11520 Y67.15430
G01 X50.15196 Y67.24305
G01 X50.20888 Y67.43065
G01 X50.22762 Y67.52486
G01 X50.24682 Y67.71996
G01 X50.24919 Y67.76799
G01 X50.24919 Y68.36799
G01 X50.24682 Y68.41599
G01 X50.23039 Y68.58282
G01 X50.22762 Y68.61112
G01 X50.20888 Y68.70530
G01 X50.15196 Y68.89290
G01 X50.11520 Y68.98168
G01 X50.07738 Y69.05241
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.19917 Y66.45991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.19917 Y66.45991
G01 X53.19917 Y66.61810
G01 X53.27715 Y66.68209
G01 X53.34507 Y66.75001
G01 X53.46942 Y66.90154
G01 X53.52279 Y66.98143
G01 X53.60115 Y67.12798
G01 X53.73673 Y67.12798
G01 X53.70623 Y67.05437
G01 X53.60072 Y66.87160
G01 X53.47222 Y66.70413
G01 X53.32302 Y66.55493
G01 X53.19917 Y66.45991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.54696 Y68.98399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.54696 Y68.98399
G01 X59.54973 Y68.93966
G01 X59.56205 Y68.79753
G01 X59.56433 Y68.78353
G01 X59.58280 Y68.69707
G01 X59.60350 Y68.61907
G01 X59.60441 Y68.61564
G01 X59.62826 Y68.54695
G01 X59.66136 Y68.46489
G01 X59.67221 Y68.44137
G01 X59.73583 Y68.32684
G01 X59.76456 Y68.27873
G01 X59.78463 Y68.25300
G01 X59.88176 Y68.13291
G01 X59.88341 Y68.13121
G01 X59.94721 Y68.06971
G01 X60.01952 Y68.00660
G01 X60.06832 Y67.97004
G01 X60.14167 Y67.92054
G01 X60.17378 Y67.90113
G01 X60.26418 Y67.85521
G01 X60.28021 Y67.84706
G01 X60.34165 Y67.81874
G01 X60.36164 Y67.81236
G01 X60.51162 Y67.76646
G01 X60.52046 Y67.76380
G01 X60.59864 Y67.75056
G01 X60.70553 Y67.73725
G01 X60.75470 Y67.73482
G01 X60.84330 Y67.73482
G01 X60.89242 Y67.73725
G01 X60.99930 Y67.75056
G01 X61.07749 Y67.76380
G01 X61.08632 Y67.76646
G01 X61.23631 Y67.81236
G01 X61.25630 Y67.81874
G01 X61.31774 Y67.84706
G01 X61.42420 Y67.90113
G01 X61.45628 Y67.92054
G01 X61.52963 Y67.97004
G01 X61.57842 Y68.00660
G01 X61.65074 Y68.06971
G01 X61.71454 Y68.13121
G01 X61.71619 Y68.13291
G01 X61.81332 Y68.25300
G01 X61.83339 Y68.27873
G01 X61.86212 Y68.32684
G01 X61.92574 Y68.44137
G01 X61.93659 Y68.46489
G01 X61.96969 Y68.54695
G01 X61.99351 Y68.61556
G01 X62.01515 Y68.69707
G01 X62.03362 Y68.78353
G01 X62.03590 Y68.79755
G01 X62.04705 Y68.92628
G01 X62.04822 Y68.93966
G01 X62.05099 Y68.98399
G01 X62.04822 Y69.02828
G01 X62.03590 Y69.17042
G01 X62.03362 Y69.18444
G01 X62.01515 Y69.27093
G01 X61.99351 Y69.35244
G01 X61.96969 Y69.42105
G01 X61.93659 Y69.50311
G01 X61.92574 Y69.52663
G01 X61.86212 Y69.64116
G01 X61.83339 Y69.68924
G01 X61.81332 Y69.71500
G01 X61.71619 Y69.83507
G01 X61.71454 Y69.83679
G01 X61.65074 Y69.89826
G01 X61.57842 Y69.96138
G01 X61.52963 Y69.99793
G01 X61.45628 Y70.04743
G01 X61.42417 Y70.06689
G01 X61.31774 Y70.12092
G01 X61.25630 Y70.14926
G01 X61.23631 Y70.15564
G01 X61.08632 Y70.20151
G01 X61.07749 Y70.20418
G01 X60.99930 Y70.21741
G01 X60.98996 Y70.21858
G01 X60.89242 Y70.23072
G01 X60.84330 Y70.23316
G01 X60.75470 Y70.23316
G01 X60.70553 Y70.23072
G01 X60.59864 Y70.21741
G01 X60.52046 Y70.20418
G01 X60.51162 Y70.20151
G01 X60.36164 Y70.15564
G01 X60.34165 Y70.14926
G01 X60.28021 Y70.12092
G01 X60.17378 Y70.06689
G01 X60.14167 Y70.04743
G01 X60.06832 Y69.99793
G01 X60.01955 Y69.96140
G01 X59.94721 Y69.89826
G01 X59.88341 Y69.83679
G01 X59.88176 Y69.83507
G01 X59.78463 Y69.71500
G01 X59.76456 Y69.68924
G01 X59.73583 Y69.64116
G01 X59.67221 Y69.52663
G01 X59.66136 Y69.50311
G01 X59.62826 Y69.42105
G01 X59.60444 Y69.35244
G01 X59.58280 Y69.27093
G01 X59.56433 Y69.18444
G01 X59.56205 Y69.17042
G01 X59.54973 Y69.02828
G01 X59.54696 Y68.98399
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.81416 Y61.67608 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.81416 Y61.67608
G01 X63.81693 Y61.63178
G01 X63.82925 Y61.48964
G01 X63.83153 Y61.47565
G01 X63.85000 Y61.38916
G01 X63.87159 Y61.30775
G01 X63.89546 Y61.23904
G01 X63.92856 Y61.15695
G01 X63.93938 Y61.13353
G01 X63.94708 Y61.11966
G01 X64.00303 Y61.01895
G01 X64.03176 Y60.97085
G01 X64.05183 Y60.94509
G01 X64.14896 Y60.82505
G01 X64.15061 Y60.82330
G01 X64.21441 Y60.76183
G01 X64.28675 Y60.69869
G01 X64.33552 Y60.66216
G01 X64.40887 Y60.61266
G01 X64.44098 Y60.59320
G01 X64.54741 Y60.53917
G01 X64.60885 Y60.51083
G01 X64.62876 Y60.50448
G01 X64.77875 Y60.45858
G01 X64.78766 Y60.45591
G01 X64.86592 Y60.44265
G01 X64.97273 Y60.42934
G01 X65.02198 Y60.42693
G01 X65.11042 Y60.42693
G01 X65.15962 Y60.42934
G01 X65.26643 Y60.44265
G01 X65.34469 Y60.45591
G01 X65.35360 Y60.45858
G01 X65.50359 Y60.50448
G01 X65.52350 Y60.51083
G01 X65.58494 Y60.53917
G01 X65.69132 Y60.59317
G01 X65.72348 Y60.61266
G01 X65.79683 Y60.66216
G01 X65.84562 Y60.69871
G01 X65.91794 Y60.76183
G01 X65.98174 Y60.82330
G01 X65.98339 Y60.82505
G01 X66.08052 Y60.94509
G01 X66.10059 Y60.97085
G01 X66.12932 Y61.01895
G01 X66.19294 Y61.13346
G01 X66.20379 Y61.15698
G01 X66.23689 Y61.23904
G01 X66.26071 Y61.30768
G01 X66.27013 Y61.34318
G01 X66.28235 Y61.38916
G01 X66.30082 Y61.47565
G01 X66.30310 Y61.48967
G01 X66.31542 Y61.63178
G01 X66.31819 Y61.67615
G01 X66.31702 Y61.69917
G01 X66.31545 Y61.72040
G01 X66.30310 Y61.86251
G01 X66.30082 Y61.87656
G01 X66.28235 Y61.96307
G01 X66.26478 Y62.02924
G01 X66.26074 Y62.04448
G01 X66.23689 Y62.11316
G01 X66.20382 Y62.19518
G01 X66.19294 Y62.21872
G01 X66.12934 Y62.33323
G01 X66.10059 Y62.38136
G01 X66.08050 Y62.40714
G01 X65.98339 Y62.52716
G01 X65.98172 Y62.52893
G01 X65.91794 Y62.59038
G01 X65.84562 Y62.65349
G01 X65.79683 Y62.69002
G01 X65.72353 Y62.73950
G01 X65.69137 Y62.75898
G01 X65.58500 Y62.81301
G01 X65.52348 Y62.84138
G01 X65.50351 Y62.84775
G01 X65.35352 Y62.89363
G01 X65.34469 Y62.89629
G01 X65.26643 Y62.90953
G01 X65.25716 Y62.91069
G01 X65.15962 Y62.92284
G01 X65.11042 Y62.92525
G01 X65.02195 Y62.92525
G01 X64.97273 Y62.92284
G01 X64.86592 Y62.90955
G01 X64.78766 Y62.89629
G01 X64.77882 Y62.89363
G01 X64.62884 Y62.84775
G01 X64.60885 Y62.84138
G01 X64.54735 Y62.81301
G01 X64.44095 Y62.75898
G01 X64.40882 Y62.73950
G01 X64.33552 Y62.69002
G01 X64.28672 Y62.65349
G01 X64.21441 Y62.59038
G01 X64.15063 Y62.52893
G01 X64.14896 Y62.52716
G01 X64.05185 Y62.40714
G01 X64.03176 Y62.38136
G01 X64.00301 Y62.33323
G01 X63.93941 Y62.21872
G01 X63.92853 Y62.19518
G01 X63.89546 Y62.11316
G01 X63.87164 Y62.04455
G01 X63.85000 Y61.96307
G01 X63.83153 Y61.87656
G01 X63.82925 Y61.86251
G01 X63.81693 Y61.72040
G01 X63.81416 Y61.67608
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.66927 Y57.58406 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.66927 Y57.58406
G01 X68.83800 Y57.58406
G01 X68.93358 Y57.57464
G01 X69.02550 Y57.54677
G01 X69.11021 Y57.50149
G01 X69.18448 Y57.44055
G01 X69.23325 Y57.38109
G01 X69.23330 Y57.38106
G01 X69.23795 Y57.36521
G01 X69.25585 Y57.29491
G01 X69.28339 Y57.16709
G01 X69.28511 Y57.15889
G01 X69.28710 Y57.13941
G01 X69.28824 Y57.09409
G01 X69.28824 Y55.49407
G01 X69.28710 Y55.44873
G01 X69.28511 Y55.42923
G01 X69.25949 Y55.33225
G01 X69.22791 Y55.26829
G01 X69.21661 Y55.24815
G01 X69.15723 Y55.17482
G01 X69.08379 Y55.11538
G01 X68.99980 Y55.07259
G01 X68.90282 Y55.04693
G01 X68.88329 Y55.04498
G01 X68.83800 Y55.04383
G01 X68.79873 Y55.04383
G01 X68.67859 Y55.03581
G01 X68.61356 Y55.02714
G01 X68.53198 Y55.00406
G01 X67.23798 Y55.00406
G01 X67.14240 Y55.01348
G01 X67.05047 Y55.04137
G01 X67.03170 Y55.05140
G01 X67.00996 Y55.07380
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.55283 Y57.85018 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.55283 Y57.85018
G01 X69.53022 Y57.84185
G01 X69.48555 Y57.81746
G01 X69.41371 Y57.75815
G01 X69.35441 Y57.68632
G01 X69.31524 Y57.62846
G01 X69.27059 Y57.54667
G01 X69.24221 Y57.45790
G01 X69.23310 Y57.38170
G01 X69.23325 Y57.38109
G01 X69.23795 Y57.36521
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.01808 Y53.25753 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.01808 Y53.25753
G01 X71.02369 Y53.33614
G01 X71.10233 Y53.25753
G01 X71.02369 Y53.17891
G01 X71.01808 Y53.25753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.35305 Y54.66550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.35305 Y54.66550
G01 X72.43169 Y54.58689
G01 X72.51031 Y54.66550
G01 X72.43167 Y54.67114
G01 X72.35305 Y54.66550
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.76105 Y53.25753 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.76105 Y53.25753
G01 X73.83966 Y53.33614
G01 X73.84528 Y53.25753
G01 X73.83966 Y53.17891
G01 X73.76105 Y53.25753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.35305 Y51.84955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.35305 Y51.84955
G01 X72.43167 Y51.84391
G01 X72.51031 Y51.84955
G01 X72.43167 Y51.92817
G01 X72.35305 Y51.84955
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.95762 Y50.89553 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.95762 Y50.89553
G01 X74.07167 Y50.89553
G01 X74.07167 Y51.00958
G01 X73.95762 Y50.89553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.95762 Y49.01552 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.95762 Y49.01552
G01 X74.07167 Y48.90148
G01 X74.07167 Y49.01552
G01 X73.95762 Y49.01552
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.95167 Y50.89553 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.95167 Y50.89553
G01 X76.06572 Y50.89553
G01 X75.95167 Y51.00958
G01 X75.95167 Y50.89553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.95167 Y48.90148 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.95167 Y48.90148
G01 X76.06572 Y49.01552
G01 X75.95167 Y49.01552
G01 X75.95167 Y48.90148
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.56864 Y45.75157 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.56864 Y45.75157
G01 X76.60039 Y45.71690
G01 X76.66950 Y45.65452
G01 X76.74918 Y45.60634
G01 X76.83653 Y45.57410
G01 X76.90407 Y45.55625
G01 X76.99602 Y45.54111
G01 X77.08919 Y45.54365
G01 X77.14360 Y45.55569
G01 X77.14420 Y45.55602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.20867 Y44.44175 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.20867 Y44.44175
G01 X76.20479 Y44.43918
G01 X76.14708 Y44.39618
G01 X76.11672 Y44.37258
G01 X76.04659 Y44.31581
G01 X76.04350 Y44.31330
G01 X75.86674 Y44.16885
G01 X75.79432 Y44.12285
G01 X75.67669 Y44.05569
G01 X75.59206 Y44.01477
G01 X75.51060 Y43.98023
G01 X75.47426 Y43.96687
G01 X75.29115 Y43.91345
G01 X75.26168 Y43.90540
G01 X75.20418 Y43.89671
G01 X75.04215 Y43.87761
G01 X74.97591 Y43.87436
G01 X74.88744 Y43.87436
G01 X74.82122 Y43.87761
G01 X74.81802 Y43.87799
G01 X74.65917 Y43.89671
G01 X74.60164 Y43.90540
G01 X74.57220 Y43.91345
G01 X74.38912 Y43.96687
G01 X74.35274 Y43.98023
G01 X74.33418 Y43.98729
G01 X74.27129 Y44.01477
G01 X74.18665 Y44.05569
G01 X74.06903 Y44.12285
G01 X73.99661 Y44.16885
G01 X73.87492 Y44.26829
G01 X73.82529 Y44.30883
G01 X73.81724 Y44.31640
G01 X73.75572 Y44.38005
G01 X73.69062 Y44.45437
G01 X73.67550 Y44.47162
G01 X73.61020 Y44.55737
G01 X73.56009 Y44.63034
G01 X73.54703 Y44.65150
G01 X73.45176 Y44.83252
G01 X73.44411 Y44.84738
G01 X73.41889 Y44.91482
G01 X73.37223 Y45.05658
G01 X73.35242 Y45.13433
G01 X73.33476 Y45.22102
G01 X73.32684 Y45.27296
G01 X73.31213 Y45.44924
G01 X73.30954 Y45.49353
G01 X73.31213 Y45.53778
G01 X73.32684 Y45.71411
G01 X73.33476 Y45.76605
G01 X73.35242 Y45.85274
G01 X73.37223 Y45.93046
G01 X73.41889 Y46.07225
G01 X73.44411 Y46.13966
G01 X73.45176 Y46.15454
G01 X73.54703 Y46.33554
G01 X73.56009 Y46.35670
G01 X73.61020 Y46.42965
G01 X73.67556 Y46.51548
G01 X73.75569 Y46.60699
G01 X73.81726 Y46.67070
G01 X73.82526 Y46.67819
G01 X73.99661 Y46.81819
G01 X74.06898 Y46.86419
G01 X74.18665 Y46.93135
G01 X74.27126 Y46.97227
G01 X74.35280 Y47.00687
G01 X74.38909 Y47.02020
G01 X74.57223 Y47.07362
G01 X74.60164 Y47.08164
G01 X74.65917 Y47.09033
G01 X74.82115 Y47.10943
G01 X74.88744 Y47.11268
G01 X74.97591 Y47.11268
G01 X75.04223 Y47.10943
G01 X75.09341 Y47.10339
G01 X75.20418 Y47.09033
G01 X75.26171 Y47.08164
G01 X75.29112 Y47.07362
G01 X75.47418 Y47.02023
G01 X75.48983 Y47.01446
G01 X75.51055 Y47.00684
G01 X75.59209 Y46.97227
G01 X75.67669 Y46.93135
G01 X75.79437 Y46.86419
G01 X75.86674 Y46.81819
G01 X76.03809 Y46.67819
G01 X76.04609 Y46.67070
G01 X76.09425 Y46.62195
G01 X76.10766 Y46.60699
G01 X76.18779 Y46.51548
G01 X76.25315 Y46.42965
G01 X76.30326 Y46.35670
G01 X76.31632 Y46.33554
G01 X76.41159 Y46.15457
G01 X76.41924 Y46.13968
G01 X76.42183 Y46.13346
G01 X76.44446 Y46.07225
G01 X76.48129 Y45.96039
G01 X76.48962 Y45.93615
G01 X76.49445 Y45.92282
G01 X76.52157 Y45.85597
G01 X76.55881 Y45.77357
G01 X76.56077 Y45.76923
G01 X76.56864 Y45.75157
G01 X76.58932 Y45.54154
G01 X76.58932 Y45.44548
G01 X76.56684 Y45.21723
G01 X76.54812 Y45.12302
G01 X76.48152 Y44.90354
G01 X76.44477 Y44.81480
G01 X76.33664 Y44.61251
G01 X76.28327 Y44.53265
G01 X76.20867 Y44.44175
G01 X76.20895 Y44.44192
G01 X76.29323 Y44.46821
G01 X76.38586 Y44.47860
G01 X76.47878 Y44.47129
G01 X76.54758 Y44.45920
G01 X76.63737 Y44.43443
G01 X76.72084 Y44.39313
G01 X76.79501 Y44.33677
G01 X76.81700 Y44.31647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.31720 Y43.59844 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.31720 Y43.59844
G01 X77.31792 Y43.59753
G01 X77.38423 Y43.55320
G01 X77.52256 Y43.47926
G01 X77.61131 Y43.44251
G01 X77.76137 Y43.39699
G01 X77.84413 Y43.38053
G01 X78.27514 Y43.38053
G01 X78.35799 Y43.39699
G01 X78.50808 Y43.44251
G01 X78.59681 Y43.47926
G01 X78.73513 Y43.55320
G01 X78.81499 Y43.60657
G01 X78.93623 Y43.70606
G01 X79.00415 Y43.77398
G01 X79.10364 Y43.89521
G01 X79.15700 Y43.97507
G01 X79.17981 Y44.01774
G01 X79.23094 Y44.11337
G01 X79.26770 Y44.20212
G01 X79.31321 Y44.35221
G01 X79.33196 Y44.44642
G01 X79.34732 Y44.60248
G01 X79.34732 Y44.69854
G01 X79.33196 Y44.85462
G01 X79.31321 Y44.94883
G01 X79.26770 Y45.09889
G01 X79.23094 Y45.18764
G01 X79.15700 Y45.32594
G01 X79.11215 Y45.39308
G01 X79.09942 Y45.40235
G01 X79.03267 Y45.45564
G01 X78.99592 Y45.48777
G01 X78.97697 Y45.50476
G01 X78.93016 Y45.54799
G01 X78.91144 Y45.56478
G01 X78.83915 Y45.62790
G01 X78.83437 Y45.63148
G01 X78.79035 Y45.66445
G01 X78.71702 Y45.71393
G01 X78.68489 Y45.73341
G01 X78.57849 Y45.78744
G01 X78.51702 Y45.81581
G01 X78.49701 Y45.82218
G01 X78.34702 Y45.86806
G01 X78.33816 Y45.87070
G01 X78.25993 Y45.88396
G01 X78.25063 Y45.88513
G01 X78.15312 Y45.89727
G01 X78.10392 Y45.89968
G01 X78.01545 Y45.89968
G01 X77.96622 Y45.89727
G01 X77.85942 Y45.88398
G01 X77.84250 Y45.88170
G01 X77.78121 Y45.87072
G01 X77.77230 Y45.86803
G01 X77.62233 Y45.82218
G01 X77.60234 Y45.81581
G01 X77.54090 Y45.78744
G01 X77.43445 Y45.73341
G01 X77.40235 Y45.71396
G01 X77.34949 Y45.67934
G01 X77.32879 Y45.66473
G01 X77.23905 Y45.60885
G01 X77.19259 Y45.58345
G01 X77.17669 Y45.57459
G01 X77.14420 Y45.55602
G01 X77.11522 Y45.52706
G01 X77.01573 Y45.40583
G01 X76.96237 Y45.32594
G01 X76.88845 Y45.18764
G01 X76.85167 Y45.09889
G01 X76.80616 Y44.94883
G01 X76.78741 Y44.85462
G01 X76.77204 Y44.69854
G01 X76.77204 Y44.60248
G01 X76.78741 Y44.44642
G01 X76.80616 Y44.35221
G01 X76.81700 Y44.31647
G01 X76.83900 Y44.28140
G01 X76.87938 Y44.21058
G01 X76.92058 Y44.13054
G01 X76.92371 Y44.12445
G01 X76.92960 Y44.11383
G01 X76.99658 Y43.99333
G01 X77.02528 Y43.94528
G01 X77.04530 Y43.91957
G01 X77.11327 Y43.83555
G01 X77.14258 Y43.79933
G01 X77.14405 Y43.79773
G01 X77.20461 Y43.73222
G01 X77.22675 Y43.70736
G01 X77.27301 Y43.65358
G01 X77.30778 Y43.61073
G01 X77.31720 Y43.59844
G01 X77.32693 Y43.57784
G01 X77.35010 Y43.48772
G01 X77.35581 Y43.39481
G01 X77.35345 Y43.32498
G01 X77.34266 Y43.23799
G01 X77.32010 Y43.16570
G01 X77.31898 Y43.16423
G01 X77.30816 Y43.14985
G01 X77.25774 Y43.08826
G01 X77.21619 Y43.04160
G01 X77.20461 Y43.02882
G01 X77.14403 Y42.96331
G01 X77.14260 Y42.96176
G01 X77.04530 Y42.84147
G01 X77.02528 Y42.81579
G01 X76.99658 Y42.76771
G01 X76.93290 Y42.65315
G01 X76.92208 Y42.62971
G01 X76.88896 Y42.54759
G01 X76.86513 Y42.47899
G01 X76.84349 Y42.39750
G01 X76.82503 Y42.31091
G01 X76.82274 Y42.29697
G01 X76.81558 Y42.21424
G01 X76.80847 Y42.15493
G01 X76.79770 Y42.08485
G01 X76.79483 Y42.06474
G01 X76.78810 Y42.01378
G01 X76.78071 Y41.97449
G01 X76.78071 Y41.97447
G01 X76.78035 Y41.97259
G01 X76.75762 Y41.92618
G01 X76.70151 Y41.85178
G01 X76.63237 Y41.78935
G01 X76.57629 Y41.74767
G01 X76.49658 Y41.69946
G01 X76.40921 Y41.66723
G01 X76.31731 Y41.65209
G01 X76.24758 Y41.64734
G01 X76.16300 Y41.64889
G01 X76.11129 Y41.65890
G01 X76.10961 Y41.65981
G01 X76.10961 Y41.65984
G01 X76.05998 Y41.68755
G01 X76.10961 Y41.65981
G01 X76.13778 Y41.63169
G01 X76.28327 Y41.45438
G01 X76.33664 Y41.37452
G01 X76.44477 Y41.17223
G01 X76.48152 Y41.08348
G01 X76.54812 Y40.86400
G01 X76.56516 Y40.77820
G01 X76.56402 Y40.76951
G01 X76.55726 Y40.69918
G01 X76.55305 Y40.62854
G01 X76.55208 Y40.53789
G01 X76.55365 Y40.49807
G01 X76.55381 Y40.49354
G01 X76.55122 Y40.44927
G01 X76.53651 Y40.27294
G01 X76.52859 Y40.22100
G01 X76.51093 Y40.13431
G01 X76.49112 Y40.05659
G01 X76.44446 Y39.91481
G01 X76.41924 Y39.84739
G01 X76.41159 Y39.83251
G01 X76.31632 Y39.65151
G01 X76.30326 Y39.63035
G01 X76.25315 Y39.55740
G01 X76.18779 Y39.47157
G01 X76.10766 Y39.38006
G01 X76.04609 Y39.31636
G01 X76.03809 Y39.30886
G01 X75.86674 Y39.16886
G01 X75.79437 Y39.12286
G01 X75.67669 Y39.05570
G01 X75.59209 Y39.01478
G01 X75.51055 Y38.98019
G01 X75.47426 Y38.96685
G01 X75.29112 Y38.91344
G01 X75.26171 Y38.90541
G01 X75.20418 Y38.89672
G01 X75.04215 Y38.87762
G01 X74.97591 Y38.87437
G01 X74.88744 Y38.87437
G01 X74.82122 Y38.87762
G01 X74.81802 Y38.87800
G01 X74.65917 Y38.89672
G01 X74.60164 Y38.90541
G01 X74.57223 Y38.91344
G01 X74.38912 Y38.96685
G01 X74.35483 Y38.97945
G01 X74.35280 Y38.98021
G01 X74.27126 Y39.01478
G01 X74.18665 Y39.05570
G01 X74.06898 Y39.12286
G01 X73.99664 Y39.16883
G01 X73.92392 Y39.22827
G01 X73.82524 Y39.30889
G01 X73.81726 Y39.31636
G01 X73.75569 Y39.38006
G01 X73.67553 Y39.47160
G01 X73.61020 Y39.55738
G01 X73.56009 Y39.63035
G01 X73.54703 Y39.65148
G01 X73.45176 Y39.83248
G01 X73.44411 Y39.84737
G01 X73.41889 Y39.91481
G01 X73.37223 Y40.05659
G01 X73.35242 Y40.13431
G01 X73.33476 Y40.22100
G01 X73.32722 Y40.27053
G01 X73.32684 Y40.27289
G01 X73.31213 Y40.44927
G01 X73.30954 Y40.49352
G01 X73.31213 Y40.53782
G01 X73.32684 Y40.71409
G01 X73.33476 Y40.76604
G01 X73.35242 Y40.85273
G01 X73.37223 Y40.93047
G01 X73.41889 Y41.07223
G01 X73.44411 Y41.13964
G01 X73.45176 Y41.15453
G01 X73.54703 Y41.33555
G01 X73.56009 Y41.35671
G01 X73.61020 Y41.42969
G01 X73.67556 Y41.51549
G01 X73.75572 Y41.60700
G01 X73.81724 Y41.67066
G01 X73.82526 Y41.67817
G01 X73.99661 Y41.81820
G01 X74.06903 Y41.86420
G01 X74.18665 Y41.93136
G01 X74.27129 Y41.97228
G01 X74.35274 Y42.00683
G01 X74.38909 Y42.02019
G01 X74.57220 Y42.07360
G01 X74.60166 Y42.08168
G01 X74.65917 Y42.09034
G01 X74.82115 Y42.10944
G01 X74.88744 Y42.11269
G01 X74.97591 Y42.11269
G01 X75.04218 Y42.10944
G01 X75.15196 Y42.09649
G01 X75.20418 Y42.09034
G01 X75.26171 Y42.08165
G01 X75.29115 Y42.07360
G01 X75.47426 Y42.02019
G01 X75.51060 Y42.00683
G01 X75.59206 Y41.97228
G01 X75.67669 Y41.93136
G01 X75.79432 Y41.86420
G01 X75.86671 Y41.81820
G01 X75.86897 Y41.81638
G01 X75.87471 Y41.81168
G01 X75.87664 Y41.81010
G01 X75.87898 Y41.80822
G01 X75.96283 Y41.74767
G01 X76.01134 Y41.71666
G01 X76.05998 Y41.68755
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.56402 Y40.76951 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.56402 Y40.76951
G01 X76.56491 Y40.77614
G01 X76.56981 Y40.79136
G01 X76.61472 Y40.87299
G01 X76.67425 Y40.94465
G01 X76.72381 Y40.99390
G01 X76.79584 Y41.05300
G01 X76.87776 Y41.09738
G01 X76.96661 Y41.12547
G01 X77.03493 Y41.14010
G01 X77.12355 Y41.15077
G01 X77.20453 Y41.14569
G01 X77.29229 Y41.10368
G01 X77.32140 Y41.08732
G01 X77.34931 Y41.07226
G01 X77.40143 Y41.04528
G01 X77.42871 Y41.03055
G01 X77.54095 Y40.97358
G01 X77.60234 Y40.94526
G01 X77.62228 Y40.93891
G01 X77.77222 Y40.89304
G01 X77.78119 Y40.89034
G01 X77.85942 Y40.87708
G01 X77.96625 Y40.86377
G01 X78.01545 Y40.86136
G01 X78.10392 Y40.86136
G01 X78.15309 Y40.86377
G01 X78.25993 Y40.87708
G01 X78.33816 Y40.89034
G01 X78.34710 Y40.89301
G01 X78.49708 Y40.93891
G01 X78.51700 Y40.94526
G01 X78.57844 Y40.97360
G01 X78.68489 Y41.02766
G01 X78.71697 Y41.04709
G01 X78.79033 Y41.09659
G01 X78.83912 Y41.13312
G01 X78.90455 Y41.19027
G01 X78.91146 Y41.19621
G01 X78.97938 Y41.25430
G01 X79.00442 Y41.27500
G01 X79.06030 Y41.31953
G01 X79.07267 Y41.32923
G01 X79.08883 Y41.36738
G01 X79.12652 Y41.45140
G01 X79.14387 Y41.48790
G01 X79.15314 Y41.50637
G01 X79.17049 Y41.53919
G01 X79.18098 Y41.55808
G01 X79.18642 Y41.56784
G01 X79.19729 Y41.59138
G01 X79.23038 Y41.67348
G01 X79.25421 Y41.74208
G01 X79.27585 Y41.82359
G01 X79.28896 Y41.88026
G01 X79.29431 Y41.91008
G01 X79.29660 Y41.92405
G01 X79.30892 Y42.06621
G01 X79.31169 Y42.11051
G01 X79.30892 Y42.15483
G01 X79.29660 Y42.29699
G01 X79.29431 Y42.31099
G01 X79.27585 Y42.39750
G01 X79.25421 Y42.47899
G01 X79.23038 Y42.54759
G01 X79.19729 Y42.62966
G01 X79.17217 Y42.68407
G01 X79.17135 Y42.68584
G01 X79.17044 Y42.68782
G01 X79.13584 Y42.77462
G01 X79.12353 Y42.81061
G01 X79.10300 Y42.86529
G01 X79.10199 Y42.86783
G01 X79.10102 Y42.87876
G01 X79.10163 Y42.97192
G01 X79.11989 Y43.06329
G01 X79.15512 Y43.14955
G01 X79.18756 Y43.21142
G01 X79.23846 Y43.28945
G01 X79.30320 Y43.35645
G01 X79.37948 Y43.40997
G01 X79.44024 Y43.44449
G01 X79.52518 Y43.48257
G01 X79.61580 Y43.50390
G01 X79.70884 Y43.50774
G01 X79.77859 Y43.50395
G01 X79.87417 Y43.48818
G01 X79.87417 Y43.71899
G01 X79.86973 Y43.72343
G01 X79.77023 Y43.84467
G01 X79.71687 Y43.92453
G01 X79.64293 Y44.06285
G01 X79.60618 Y44.15158
G01 X79.56066 Y44.30166
G01 X79.54191 Y44.39587
G01 X79.52655 Y44.55196
G01 X79.52655 Y44.64799
G01 X79.54191 Y44.80408
G01 X79.56066 Y44.89828
G01 X79.60618 Y45.04837
G01 X79.64293 Y45.13710
G01 X79.71687 Y45.27542
G01 X79.77023 Y45.35528
G01 X79.86973 Y45.47652
G01 X79.87417 Y45.48096
G01 X79.87417 Y45.65404
G01 X79.75512 Y45.53496
G01 X79.64344 Y45.45137
G01 X79.58212 Y45.41789
G01 X79.49650 Y45.38124
G01 X79.40552 Y45.36145
G01 X79.31240 Y45.35922
G01 X79.24270 Y45.36420
G01 X79.12726 Y45.38660
G01 X79.11034 Y45.39440
G01 X79.09942 Y45.40235
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.67719 Y53.35788 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.67719 Y53.35788
G01 X82.67719 Y53.37571
G01 X82.68179 Y53.39291
G01 X82.69070 Y53.40835
G01 X82.70333 Y53.42098
G01 X82.71877 Y53.42989
G01 X82.75161 Y53.43868
G01 X82.76088 Y53.43929
G01 X85.30030 Y53.43929
G01 X85.30957 Y53.43868
G01 X85.34244 Y53.42989
G01 X85.35785 Y53.42098
G01 X85.37048 Y53.40835
G01 X85.37939 Y53.39291
G01 X85.38399 Y53.37571
G01 X85.38399 Y53.35788
G01 X85.37939 Y53.34069
G01 X85.37048 Y53.32524
G01 X85.35788 Y53.31264
G01 X85.34244 Y53.30373
G01 X85.30952 Y53.29492
G01 X85.30030 Y53.29431
G01 X84.59311 Y53.29431
G01 X84.49750 Y53.28488
G01 X84.40558 Y53.25699
G01 X84.32087 Y53.21173
G01 X84.24660 Y53.15080
G01 X84.18567 Y53.07653
G01 X84.14041 Y52.99182
G01 X84.11252 Y52.89989
G01 X84.10309 Y52.80429
G01 X84.10309 Y48.88288
G01 X84.10248 Y48.87364
G01 X84.09367 Y48.84070
G01 X84.08475 Y48.82525
G01 X84.07213 Y48.81263
G01 X84.05671 Y48.80371
G01 X84.03952 Y48.79912
G01 X84.02166 Y48.79912
G01 X84.00447 Y48.80371
G01 X83.98905 Y48.81263
G01 X83.97642 Y48.82525
G01 X83.96751 Y48.84070
G01 X83.95869 Y48.87364
G01 X83.95808 Y48.88288
G01 X83.95808 Y52.80429
G01 X83.94866 Y52.89989
G01 X83.92077 Y52.99182
G01 X83.87551 Y53.07653
G01 X83.81457 Y53.15080
G01 X83.74031 Y53.21173
G01 X83.65560 Y53.25699
G01 X83.56367 Y53.28488
G01 X83.46809 Y53.29431
G01 X82.76088 Y53.29431
G01 X82.75166 Y53.29492
G01 X82.71877 Y53.30373
G01 X82.70330 Y53.31264
G01 X82.69070 Y53.32524
G01 X82.68179 Y53.34069
G01 X82.67719 Y53.35788
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.66443 Y54.79661 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.66443 Y54.79661
G01 X88.64484 Y54.81952
G01 X88.61860 Y54.85122
G01 X88.61297 Y54.85796
G01 X88.55513 Y54.92648
G01 X88.54223 Y54.94142
G01 X88.52462 Y54.96486
G01 X88.47494 Y55.03832
G01 X88.46859 Y55.04876
G01 X88.45246 Y55.08188
G01 X88.41774 Y55.16311
G01 X88.41624 Y55.16712
G01 X88.40461 Y55.21035
G01 X88.38589 Y55.29669
G01 X88.38561 Y55.29824
G01 X88.38256 Y55.33464
G01 X88.38203 Y55.34558
G01 X88.38091 Y55.38998
G01 X88.38091 Y56.58998
G01 X88.38203 Y56.63443
G01 X88.38256 Y56.64535
G01 X88.38561 Y56.68173
G01 X88.38589 Y56.68330
G01 X88.40461 Y56.76961
G01 X88.41624 Y56.81287
G01 X88.41772 Y56.81685
G01 X88.45246 Y56.89808
G01 X88.46859 Y56.93120
G01 X88.47494 Y56.94164
G01 X88.52462 Y57.01510
G01 X88.54174 Y57.03791
G01 X88.55554 Y57.05312
G01 X88.61799 Y57.11558
G01 X88.63323 Y57.12940
G01 X88.65604 Y57.14652
G01 X88.72945 Y57.19618
G01 X88.73997 Y57.20258
G01 X88.77299 Y57.21866
G01 X88.85437 Y57.25345
G01 X88.85833 Y57.25493
G01 X88.90161 Y57.26656
G01 X88.98810 Y57.28533
G01 X88.98942 Y57.28556
G01 X89.02582 Y57.28861
G01 X89.03697 Y57.28914
G01 X89.08119 Y57.29023
G01 X90.58119 Y57.29023
G01 X90.62538 Y57.28914
G01 X90.63653 Y57.28861
G01 X90.67291 Y57.28556
G01 X90.67425 Y57.28533
G01 X90.76074 Y57.26656
G01 X90.80402 Y57.25493
G01 X90.80798 Y57.25345
G01 X90.88936 Y57.21866
G01 X90.92243 Y57.20255
G01 X90.93293 Y57.19618
G01 X90.93808 Y57.19303
G01 X91.00631 Y57.14652
G01 X91.02909 Y57.12940
G01 X91.04435 Y57.11558
G01 X91.10681 Y57.05312
G01 X91.12058 Y57.03791
G01 X91.13773 Y57.01510
G01 X91.18741 Y56.94164
G01 X91.19376 Y56.93118
G01 X91.20989 Y56.89808
G01 X91.24463 Y56.81685
G01 X91.24611 Y56.81287
G01 X91.25774 Y56.76961
G01 X91.27646 Y56.68330
G01 X91.27674 Y56.68175
G01 X91.27979 Y56.64533
G01 X91.28032 Y56.63443
G01 X91.28144 Y56.58998
G01 X91.28144 Y55.38998
G01 X91.28032 Y55.34558
G01 X91.27979 Y55.33464
G01 X91.27674 Y55.29821
G01 X91.27646 Y55.29669
G01 X91.26455 Y55.23730
G01 X91.25774 Y55.21033
G01 X91.24611 Y55.16715
G01 X91.24461 Y55.16311
G01 X91.20989 Y55.08188
G01 X91.19376 Y55.04876
G01 X91.18741 Y55.03832
G01 X91.13773 Y54.96486
G01 X91.12012 Y54.94142
G01 X91.10722 Y54.92648
G01 X91.08436 Y54.89938
G01 X91.05998 Y54.87167
G01 X91.04847 Y54.85910
G01 X91.01588 Y54.82153
G01 X90.96683 Y54.76194
G01 X90.96681 Y54.76189
G01 X90.94669 Y54.69923
G01 X90.93265 Y54.63078
G01 X90.92269 Y54.53812
G01 X90.93044 Y54.44526
G01 X90.93491 Y54.42933
G01 X90.95299 Y54.39529
G01 X90.97169 Y54.36174
G01 X91.00732 Y54.30063
G01 X91.03894 Y54.25023
G01 X91.05642 Y54.22430
G01 X91.07346 Y54.19667
G01 X91.08593 Y54.17495
G01 X91.14705 Y54.06497
G01 X91.16452 Y54.02804
G01 X91.16846 Y54.01955
G01 X91.19835 Y53.94632
G01 X91.21212 Y53.90784
G01 X91.24669 Y53.78684
G01 X91.25782 Y53.74394
G01 X91.26396 Y53.70005
G01 X91.27834 Y53.57503
G01 X91.28035 Y53.53421
G01 X91.28035 Y53.44574
G01 X91.27834 Y53.40495
G01 X91.26396 Y53.27993
G01 X91.25782 Y53.23604
G01 X91.24669 Y53.19314
G01 X91.21212 Y53.07213
G01 X91.19835 Y53.03365
G01 X91.16452 Y52.95194
G01 X91.14707 Y52.91503
G01 X91.08593 Y52.80503
G01 X91.06346 Y52.76682
G01 X91.03679 Y52.73149
G01 X90.95853 Y52.63286
G01 X90.93112 Y52.60264
G01 X90.86851 Y52.54003
G01 X90.83831 Y52.51265
G01 X90.73968 Y52.43439
G01 X90.70432 Y52.40772
G01 X90.66617 Y52.38527
G01 X90.55614 Y52.32410
G01 X90.51921 Y52.30665
G01 X90.43745 Y52.27279
G01 X90.39902 Y52.25903
G01 X90.27801 Y52.22446
G01 X90.23509 Y52.21336
G01 X90.19124 Y52.20721
G01 X90.06620 Y52.19283
G01 X90.02541 Y52.19083
G01 X89.98116 Y52.18974
G01 X89.68119 Y52.18974
G01 X89.63694 Y52.19083
G01 X89.59615 Y52.19283
G01 X89.47110 Y52.20721
G01 X89.42726 Y52.21336
G01 X89.38434 Y52.22446
G01 X89.26331 Y52.25903
G01 X89.22490 Y52.27277
G01 X89.15139 Y52.30279
G01 X89.14311 Y52.30665
G01 X89.10623 Y52.32410
G01 X88.99618 Y52.38527
G01 X88.95802 Y52.40772
G01 X88.92267 Y52.43439
G01 X88.82406 Y52.51265
G01 X88.79384 Y52.54003
G01 X88.73123 Y52.60264
G01 X88.70382 Y52.63289
G01 X88.62556 Y52.73149
G01 X88.59889 Y52.76685
G01 X88.57641 Y52.80503
G01 X88.51528 Y52.91503
G01 X88.49783 Y52.95194
G01 X88.46399 Y53.03365
G01 X88.45023 Y53.07211
G01 X88.44124 Y53.10360
G01 X88.41566 Y53.19314
G01 X88.40453 Y53.23606
G01 X88.39839 Y53.27993
G01 X88.38401 Y53.40495
G01 X88.38200 Y53.44574
G01 X88.38200 Y53.53421
G01 X88.38401 Y53.57503
G01 X88.39839 Y53.70005
G01 X88.40453 Y53.74391
G01 X88.41294 Y53.77711
G01 X88.41566 Y53.78684
G01 X88.45023 Y53.90787
G01 X88.46399 Y53.94632
G01 X88.49783 Y54.02804
G01 X88.51528 Y54.06494
G01 X88.57641 Y54.17495
G01 X88.60595 Y54.22433
G01 X88.62145 Y54.24734
G01 X88.62343 Y54.25023
G01 X88.64218 Y54.27787
G01 X88.70982 Y54.39491
G01 X88.74324 Y54.46349
G01 X88.75513 Y54.48714
G01 X88.77786 Y54.53106
G01 X88.81660 Y54.61351
G01 X88.74296 Y54.70566
G01 X88.70900 Y54.74607
G01 X88.69737 Y54.75925
G01 X88.69737 Y54.75928
G01 X88.69554 Y54.76136
G01 X88.66443 Y54.79661
G01 X88.69737 Y54.75928
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.69737 Y54.75925 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.69737 Y54.75925
G01 X88.71131 Y54.74995
G01 X88.75452 Y54.72687
G01 X88.84327 Y54.69011
G01 X88.89018 Y54.67589
G01 X88.98439 Y54.65714
G01 X89.02358 Y54.65328
G01 X89.03346 Y54.65524
G01 X89.08116 Y54.66596
G01 X89.13928 Y54.68051
G01 X89.22765 Y54.69814
G01 X89.39424 Y54.72283
G01 X89.47524 Y54.73083
G01 X89.64187 Y54.73901
G01 X89.68119 Y54.73997
G01 X89.98116 Y54.73997
G01 X90.02048 Y54.73901
G01 X90.18710 Y54.73083
G01 X90.26811 Y54.72283
G01 X90.43470 Y54.69814
G01 X90.52307 Y54.68051
G01 X90.58116 Y54.66596
G01 X90.62889 Y54.65524
G01 X90.63872 Y54.65328
G01 X90.68441 Y54.62887
G01 X90.76427 Y54.57551
G01 X90.89307 Y54.46979
G01 X90.93646 Y54.42641
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.96681 Y54.76189 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.96681 Y54.76189
G01 X90.96422 Y54.75874
G01 X90.95106 Y54.74995
G01 X90.90786 Y54.72687
G01 X90.81911 Y54.69011
G01 X90.77219 Y54.67589
G01 X90.67799 Y54.65714
G01 X90.63872 Y54.65328
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.02358 Y54.65328 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.02358 Y54.65328
G01 X88.97796 Y54.62887
G01 X88.89811 Y54.57551
G01 X88.76930 Y54.46979
G01 X88.72447 Y54.42499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.63872 Y45.42229 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.63872 Y45.42229
G01 X90.68441 Y45.39788
G01 X90.76427 Y45.34449
G01 X90.89307 Y45.23880
G01 X90.93643 Y45.19544
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.01588 Y45.59054 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.01588 Y45.59054
G01 X90.95352 Y45.51474
G01 X90.92119 Y45.47347
G01 X90.92050 Y45.47258
G01 X90.87227 Y45.41218
G01 X90.84682 Y45.38228
G01 X90.90542 Y45.25381
G01 X90.93493 Y45.19828
G01 X90.93643 Y45.19544
G01 X90.95297 Y45.16432
G01 X90.97163 Y45.13080
G01 X91.00730 Y45.06968
G01 X91.03892 Y45.01929
G01 X91.05652 Y44.99310
G01 X91.08593 Y44.94393
G01 X91.09485 Y44.92788
G01 X91.14710 Y44.83390
G01 X91.15053 Y44.82663
G01 X91.16452 Y44.79704
G01 X91.19835 Y44.71533
G01 X91.21212 Y44.67687
G01 X91.24669 Y44.55584
G01 X91.25782 Y44.51294
G01 X91.26396 Y44.46905
G01 X91.27834 Y44.34401
G01 X91.28035 Y44.30321
G01 X91.28035 Y44.21475
G01 X91.27834 Y44.17395
G01 X91.26396 Y44.04893
G01 X91.25782 Y44.00504
G01 X91.24669 Y43.96214
G01 X91.21212 Y43.84114
G01 X91.19835 Y43.80266
G01 X91.16452 Y43.72099
G01 X91.14707 Y43.68404
G01 X91.08593 Y43.57406
G01 X91.06346 Y43.53583
G01 X91.03676 Y43.50045
G01 X90.95853 Y43.40187
G01 X90.93110 Y43.37159
G01 X90.86851 Y43.30903
G01 X90.83828 Y43.28163
G01 X90.73968 Y43.20337
G01 X90.70435 Y43.17672
G01 X90.66617 Y43.15427
G01 X90.55612 Y43.09311
G01 X90.51924 Y43.07566
G01 X90.43745 Y43.04177
G01 X90.39902 Y43.02803
G01 X90.27801 Y42.99346
G01 X90.23511 Y42.98236
G01 X90.19124 Y42.97622
G01 X90.06620 Y42.96184
G01 X90.02541 Y42.95983
G01 X89.98116 Y42.95874
G01 X89.68119 Y42.95874
G01 X89.63694 Y42.95983
G01 X89.59615 Y42.96184
G01 X89.47110 Y42.97622
G01 X89.42724 Y42.98236
G01 X89.38434 Y42.99346
G01 X89.26336 Y43.02803
G01 X89.22490 Y43.04177
G01 X89.16900 Y43.06390
G01 X89.14314 Y43.07566
G01 X89.10621 Y43.09311
G01 X88.99618 Y43.15427
G01 X88.95802 Y43.17672
G01 X88.92267 Y43.20339
G01 X88.82404 Y43.28165
G01 X88.79384 Y43.30903
G01 X88.73125 Y43.37159
G01 X88.70382 Y43.40187
G01 X88.62559 Y43.50045
G01 X88.59889 Y43.53583
G01 X88.57641 Y43.57406
G01 X88.51528 Y43.68404
G01 X88.49783 Y43.72099
G01 X88.46399 Y43.80266
G01 X88.45023 Y43.84114
G01 X88.41566 Y43.96214
G01 X88.40453 Y44.00502
G01 X88.39839 Y44.04893
G01 X88.39326 Y44.09366
G01 X88.38401 Y44.17395
G01 X88.38200 Y44.21475
G01 X88.38200 Y44.30321
G01 X88.38401 Y44.34403
G01 X88.39839 Y44.46905
G01 X88.40453 Y44.51289
G01 X88.41566 Y44.55584
G01 X88.43669 Y44.62948
G01 X88.45023 Y44.67685
G01 X88.46399 Y44.71533
G01 X88.49783 Y44.79704
G01 X88.51528 Y44.83395
G01 X88.57641 Y44.94395
G01 X88.60595 Y44.99333
G01 X88.62137 Y45.01622
G01 X88.62346 Y45.01929
G01 X88.64210 Y45.04675
G01 X88.70984 Y45.16394
G01 X88.72356 Y45.19206
G01 X88.73108 Y45.23336
G01 X88.73605 Y45.30306
G01 X88.73382 Y45.39618
G01 X88.71403 Y45.48716
G01 X88.69554 Y45.53034
G01 X88.69554 Y45.53036
G01 X88.66437 Y45.56570
G01 X88.69554 Y45.53034
G01 X88.69737 Y45.52828
G01 X88.71131 Y45.51896
G01 X88.75452 Y45.49587
G01 X88.84327 Y45.45909
G01 X88.89018 Y45.44487
G01 X88.98439 Y45.42615
G01 X89.02358 Y45.42229
G01 X89.03346 Y45.42424
G01 X89.08116 Y45.43496
G01 X89.13928 Y45.44952
G01 X89.22765 Y45.46714
G01 X89.39424 Y45.49183
G01 X89.47524 Y45.49983
G01 X89.64187 Y45.50801
G01 X89.68119 Y45.50898
G01 X89.98116 Y45.50898
G01 X90.02048 Y45.50801
G01 X90.18710 Y45.49983
G01 X90.26811 Y45.49183
G01 X90.43470 Y45.46714
G01 X90.52307 Y45.44952
G01 X90.58116 Y45.43496
G01 X90.62889 Y45.42424
G01 X90.63872 Y45.42229
G01 X90.67799 Y45.42615
G01 X90.77219 Y45.44487
G01 X90.81911 Y45.45909
G01 X90.90786 Y45.49587
G01 X90.95106 Y45.51896
G01 X90.96419 Y45.52775
G01 X91.01588 Y45.59054
G01 X91.04847 Y45.62810
G01 X91.06010 Y45.64083
G01 X91.08446 Y45.66851
G01 X91.10725 Y45.69549
G01 X91.12007 Y45.71035
G01 X91.13773 Y45.73387
G01 X91.18741 Y45.80733
G01 X91.19376 Y45.81776
G01 X91.20989 Y45.85089
G01 X91.24463 Y45.93212
G01 X91.24611 Y45.93610
G01 X91.25774 Y45.97936
G01 X91.26828 Y46.02287
G01 X91.27646 Y46.06567
G01 X91.27674 Y46.06722
G01 X91.27979 Y46.10364
G01 X91.28032 Y46.11454
G01 X91.28144 Y46.15896
G01 X91.28144 Y47.35899
G01 X91.28032 Y47.40344
G01 X91.27979 Y47.41433
G01 X91.27674 Y47.45073
G01 X91.27646 Y47.45231
G01 X91.25774 Y47.53862
G01 X91.24611 Y47.58187
G01 X91.24463 Y47.58586
G01 X91.20989 Y47.66709
G01 X91.19376 Y47.70018
G01 X91.18741 Y47.71065
G01 X91.13770 Y47.78411
G01 X91.12061 Y47.80692
G01 X91.10679 Y47.82213
G01 X91.04423 Y47.88469
G01 X91.02909 Y47.89841
G01 X91.00618 Y47.91560
G01 X90.93310 Y47.96506
G01 X90.92236 Y47.97156
G01 X90.88957 Y47.98756
G01 X90.80798 Y48.02246
G01 X90.80402 Y48.02393
G01 X90.76074 Y48.03557
G01 X90.67425 Y48.05434
G01 X90.67291 Y48.05457
G01 X90.63653 Y48.05761
G01 X90.62538 Y48.05815
G01 X90.58119 Y48.05924
G01 X89.08119 Y48.05924
G01 X89.03697 Y48.05815
G01 X89.02582 Y48.05761
G01 X88.98942 Y48.05457
G01 X88.98810 Y48.05434
G01 X88.90161 Y48.03557
G01 X88.85833 Y48.02393
G01 X88.85437 Y48.02246
G01 X88.77278 Y47.98756
G01 X88.73999 Y47.97156
G01 X88.72925 Y47.96506
G01 X88.65617 Y47.91560
G01 X88.63323 Y47.89841
G01 X88.61812 Y47.88469
G01 X88.55554 Y47.82213
G01 X88.54174 Y47.80692
G01 X88.52462 Y47.78411
G01 X88.47494 Y47.71065
G01 X88.46859 Y47.70021
G01 X88.45246 Y47.66709
G01 X88.41774 Y47.58586
G01 X88.41624 Y47.58185
G01 X88.40461 Y47.53862
G01 X88.38589 Y47.45231
G01 X88.38561 Y47.45073
G01 X88.38256 Y47.41433
G01 X88.38203 Y47.40344
G01 X88.38091 Y47.35899
G01 X88.38091 Y46.15896
G01 X88.38203 Y46.11454
G01 X88.38256 Y46.10364
G01 X88.38561 Y46.06724
G01 X88.38589 Y46.06567
G01 X88.40461 Y45.97936
G01 X88.41624 Y45.93613
G01 X88.41774 Y45.93212
G01 X88.45246 Y45.85089
G01 X88.46859 Y45.81776
G01 X88.47494 Y45.80733
G01 X88.52462 Y45.73387
G01 X88.54228 Y45.71035
G01 X88.55510 Y45.69549
G01 X88.61294 Y45.62696
G01 X88.61855 Y45.62025
G01 X88.64484 Y45.58853
G01 X88.66437 Y45.56570
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.02358 Y45.42229 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.02358 Y45.42229
G01 X88.97796 Y45.39788
G01 X88.89811 Y45.34449
G01 X88.76930 Y45.23880
G01 X88.72450 Y45.19399
G01 X88.72356 Y45.19206
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.89592 Y38.54298 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.89592 Y38.54298
G01 X87.89707 Y38.49774
G01 X87.89902 Y38.47818
G01 X87.91538 Y38.41163
G01 X87.92468 Y38.38120
G01 X87.96753 Y38.29710
G01 X88.02694 Y38.22372
G01 X88.09646 Y38.16713
G01 X88.10022 Y38.16436
G01 X88.10413 Y38.16215
G01 X88.18439 Y38.12149
G01 X88.28139 Y38.09583
G01 X88.30093 Y38.09388
G01 X88.34619 Y38.09274
G01 X90.04619 Y38.09274
G01 X90.09142 Y38.09388
G01 X90.11096 Y38.09583
G01 X90.20798 Y38.12149
G01 X90.29203 Y38.16431
G01 X90.36541 Y38.22375
G01 X90.42482 Y38.29708
G01 X90.46767 Y38.38120
G01 X90.49333 Y38.47821
G01 X90.49528 Y38.49774
G01 X90.49643 Y38.54298
G01 X90.49643 Y40.24297
G01 X90.49528 Y40.28824
G01 X90.49333 Y40.30777
G01 X90.46767 Y40.40480
G01 X90.42482 Y40.48887
G01 X90.36541 Y40.56223
G01 X90.29206 Y40.62164
G01 X90.20913 Y40.66398
G01 X90.20801 Y40.66446
G01 X90.18708 Y40.67099
G01 X90.11096 Y40.69014
G01 X90.09140 Y40.69210
G01 X90.04619 Y40.69324
G01 X88.34619 Y40.69324
G01 X88.30090 Y40.69210
G01 X88.28139 Y40.69014
G01 X88.18439 Y40.66449
G01 X88.10027 Y40.62164
G01 X88.02694 Y40.56223
G01 X87.96753 Y40.48890
G01 X87.92468 Y40.40477
G01 X87.89902 Y40.30777
G01 X87.89707 Y40.28824
G01 X87.89592 Y40.24297
G01 X87.89592 Y38.54298
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.37967 Y35.94842 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.37967 Y35.94842
G01 X84.37967 Y36.43851
G01 X84.38910 Y36.53412
G01 X84.41513 Y36.61992
G01 X84.41584 Y36.62070
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.02534 Y36.56376 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.02534 Y36.56376
G01 X84.07414 Y36.51504
G01 X84.17363 Y36.39383
G01 X84.22699 Y36.31395
G01 X84.30093 Y36.17565
G01 X84.33769 Y36.08690
G01 X84.37967 Y35.94842
G01 X84.38148 Y35.93638
G01 X84.39085 Y35.84153
G01 X84.39855 Y35.68469
G01 X84.39969 Y35.63851
G01 X84.39969 Y34.83851
G01 X84.39855 Y34.79236
G01 X84.39085 Y34.63552
G01 X84.38148 Y34.54067
G01 X84.37967 Y34.52851
G01 X84.37967 Y34.03851
G01 X84.38910 Y33.94291
G01 X84.41437 Y33.85962
G01 X84.41666 Y33.85718
G01 X84.50497 Y33.76379
G01 X84.51940 Y33.74885
G01 X84.52786 Y33.74029
G01 X84.62382 Y33.65985
G01 X84.64747 Y33.64667
G01 X84.70784 Y33.61705
G01 X84.80490 Y33.59137
G01 X84.82443 Y33.58942
G01 X84.86969 Y33.58827
G01 X86.46966 Y33.58827
G01 X86.51493 Y33.58942
G01 X86.53446 Y33.59137
G01 X86.59646 Y33.60644
G01 X86.72432 Y33.64233
G01 X86.77566 Y33.65878
G01 X86.81617 Y33.69203
G01 X86.87710 Y33.76628
G01 X86.92239 Y33.85099
G01 X86.95028 Y33.94291
G01 X86.95224 Y33.96331
G01 X86.93987 Y34.03854
G01 X86.93474 Y34.07402
G01 X86.92701 Y34.13537
G01 X86.91993 Y34.24845
G01 X86.91993 Y36.43854
G01 X86.91879 Y36.48377
G01 X86.91683 Y36.50331
G01 X86.89118 Y36.60031
G01 X86.87042 Y36.64377
G01 X86.84830 Y36.68446
G01 X86.82417 Y36.71618
G01 X86.78894 Y36.75776
G01 X86.71561 Y36.81715
G01 X86.63263 Y36.85952
G01 X86.63149 Y36.86000
G01 X86.53446 Y36.88568
G01 X86.51487 Y36.88763
G01 X86.46966 Y36.88878
G01 X84.86969 Y36.88878
G01 X84.82440 Y36.88763
G01 X84.80490 Y36.88568
G01 X84.70789 Y36.86002
G01 X84.62377 Y36.81717
G01 X84.52760 Y36.73650
G01 X84.45252 Y36.66058
G01 X84.41584 Y36.62070
G01 X84.39954 Y36.61179
G01 X84.31384 Y36.57509
G01 X84.22273 Y36.55525
G01 X84.12951 Y36.55306
G01 X84.05981 Y36.55807
G01 X84.02534 Y36.56376
G01 X84.00020 Y36.57567
G01 X83.89903 Y36.63130
G01 X83.88148 Y36.64240
G01 X83.86230 Y36.65487
G01 X83.84973 Y36.66325
G01 X83.78686 Y36.70163
G01 X83.68255 Y36.75962
G01 X83.64861 Y36.77567
G01 X83.56680 Y36.80955
G01 X83.53149 Y36.82218
G01 X83.41668 Y36.85497
G01 X83.37383 Y36.86607
G01 X83.32994 Y36.87222
G01 X83.21143 Y36.88585
G01 X83.17391 Y36.88768
G01 X83.08544 Y36.88768
G01 X83.04793 Y36.88585
G01 X82.92939 Y36.87222
G01 X82.88552 Y36.86607
G01 X82.84262 Y36.85494
G01 X82.81178 Y36.84615
G01 X82.72786 Y36.82218
G01 X82.69253 Y36.80955
G01 X82.61074 Y36.77567
G01 X82.57683 Y36.75962
G01 X82.47249 Y36.70163
G01 X82.43429 Y36.67915
G01 X82.39898 Y36.65251
G01 X82.30551 Y36.57834
G01 X82.27767 Y36.55311
G01 X82.26611 Y36.54245
G01 X82.21283 Y36.49241
G01 X82.16949 Y36.45421
G01 X82.11468 Y36.40882
G01 X82.09080 Y36.38967
G01 X82.07643 Y36.37852
G01 X82.03523 Y36.36086
G01 X81.94425 Y36.34108
G01 X81.85113 Y36.33884
G01 X81.78143 Y36.34382
G01 X81.70086 Y36.35639
G01 X81.64707 Y36.37427
G01 X81.64633 Y36.37481
G01 X81.64633 Y36.37483
G01 X81.62758 Y36.38888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.85966 Y35.85398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.85966 Y35.85398
G01 X81.87615 Y35.93683
G01 X81.92169 Y36.08690
G01 X81.95844 Y36.17565
G01 X82.03236 Y36.31395
G01 X82.07450 Y36.37699
G01 X82.09080 Y36.38967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.12525 Y38.97191 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.12525 Y38.97191
G01 X82.08069 Y39.00848
G01 X82.01976 Y39.08275
G01 X81.99809 Y39.12332
G01 X81.99825 Y39.12393
G01 X82.04143 Y39.28646
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.99827 Y41.18597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.99827 Y41.18597
G01 X81.98250 Y41.19893
G01 X81.90262 Y41.25229
G01 X81.76431 Y41.32623
G01 X81.67556 Y41.36299
G01 X81.52550 Y41.40850
G01 X81.43129 Y41.42725
G01 X81.27521 Y41.44261
G01 X81.26889 Y41.44261
G01 X81.14854 Y41.56296
G01 X81.22715 Y41.56860
G01 X81.42835 Y41.55420
G01 X81.62543 Y41.51132
G01 X81.81438 Y41.44086
G01 X81.87511 Y41.40769
G01 X81.91722 Y41.38724
G01 X81.93889 Y41.37797
G01 X82.02753 Y41.34965
G01 X82.11991 Y41.33860
G01 X82.12248 Y41.33853
G01 X82.12779 Y41.34010
G01 X82.12781 Y41.34013
G01 X82.19027 Y41.35877
G01 X82.31813 Y41.39187
G01 X82.36238 Y41.40213
G01 X82.38184 Y41.40411
G01 X82.42715 Y41.40523
G01 X84.02720 Y41.40523
G01 X84.07272 Y41.40408
G01 X84.09197 Y41.40215
G01 X84.18892 Y41.37650
G01 X84.27302 Y41.33367
G01 X84.28041 Y41.32824
G01 X84.34640 Y41.27426
G01 X84.36471 Y41.25328
G01 X84.40584 Y41.20088
G01 X84.41958 Y41.17622
G01 X84.44869 Y41.11678
G01 X84.47431 Y41.01983
G01 X84.47630 Y41.00032
G01 X84.47744 Y40.95499
G01 X84.47744 Y39.35496
G01 X84.47630 Y39.30965
G01 X84.47431 Y39.29014
G01 X84.44869 Y39.19322
G01 X84.41335 Y39.12238
G01 X84.40579 Y39.10902
G01 X84.34643 Y39.03574
G01 X84.27310 Y38.97633
G01 X84.18900 Y38.93348
G01 X84.09202 Y38.90785
G01 X84.07251 Y38.90587
G01 X84.02720 Y38.90475
G01 X82.42715 Y38.90475
G01 X82.38184 Y38.90587
G01 X82.36238 Y38.90785
G01 X82.31813 Y38.91811
G01 X82.27605 Y38.92901
G01 X82.25321 Y38.93523
G01 X82.12527 Y38.97191
G01 X82.12525 Y38.97191
G01 X82.12502 Y38.97198
G01 X82.07424 Y38.96591
G01 X82.00597 Y38.95108
G01 X81.87511 Y38.90228
G01 X81.81438 Y38.86911
G01 X81.62543 Y38.79865
G01 X81.42835 Y38.75578
G01 X81.22715 Y38.74138
G01 X81.14854 Y38.74701
G01 X81.26889 Y38.86733
G01 X81.27521 Y38.86733
G01 X81.43129 Y38.88270
G01 X81.52550 Y38.90145
G01 X81.67556 Y38.94696
G01 X81.76431 Y38.98372
G01 X81.90262 Y39.05766
G01 X81.98250 Y39.11102
G01 X81.99825 Y39.12393
G01 X81.99827 Y39.12395
G01 X82.04143 Y39.28646
G01 X82.06672 Y39.35496
G01 X82.06939 Y39.36233
G01 X82.12553 Y39.51917
G01 X82.14298 Y39.57653
G01 X82.18227 Y39.73337
G01 X82.19164 Y39.78049
G01 X82.21491 Y39.93731
G01 X82.21897 Y39.97851
G01 X82.22669 Y40.13533
G01 X82.22669 Y40.17462
G01 X82.21897 Y40.33147
G01 X82.21491 Y40.37267
G01 X82.19164 Y40.52949
G01 X82.18227 Y40.57660
G01 X82.14298 Y40.73345
G01 X82.12553 Y40.79080
G01 X82.06939 Y40.94765
G01 X82.06672 Y40.95499
G01 X82.04143 Y41.02352
G01 X81.99827 Y41.18597
G01 X81.99809 Y41.18666
G01 X82.01976 Y41.22720
G01 X82.08069 Y41.30147
G01 X82.12779 Y41.34010
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.39101 Y43.74619 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.39101 Y43.74619
G01 X82.31023 Y43.84467
G01 X82.25687 Y43.92453
G01 X82.18293 Y44.06285
G01 X82.14618 Y44.15158
G01 X82.10066 Y44.30166
G01 X82.08417 Y44.38439
G01 X82.08417 Y44.81540
G01 X82.06772 Y44.89828
G01 X82.02220 Y45.04837
G01 X81.98544 Y45.13710
G01 X81.91151 Y45.27542
G01 X81.85814 Y45.35528
G01 X81.75865 Y45.47652
G01 X81.75418 Y45.48099
G01 X81.75418 Y45.65404
G01 X81.79868 Y45.60951
G01 X81.84290 Y45.57034
G01 X81.86639 Y45.55193
G01 X81.95044 Y45.49887
G01 X82.04346 Y45.46387
G01 X82.11102 Y45.44601
G01 X82.20292 Y45.43087
G01 X82.29601 Y45.43339
G01 X82.38694 Y45.45348
G01 X82.39217 Y45.45518
G01 X82.41597 Y45.47139
G01 X82.44785 Y45.49224
G01 X82.49583 Y45.52229
G01 X82.55885 Y45.56549
G01 X82.62352 Y45.61393
G01 X82.69687 Y45.66343
G01 X82.72895 Y45.68287
G01 X82.83540 Y45.73692
G01 X82.89685 Y45.76526
G01 X82.91684 Y45.77164
G01 X83.06682 Y45.81751
G01 X83.07566 Y45.82018
G01 X83.15384 Y45.83341
G01 X83.26073 Y45.84672
G01 X83.30990 Y45.84916
G01 X83.39850 Y45.84916
G01 X83.44762 Y45.84672
G01 X83.54516 Y45.83458
G01 X83.55450 Y45.83341
G01 X83.63269 Y45.82018
G01 X83.64152 Y45.81751
G01 X83.79151 Y45.77164
G01 X83.81150 Y45.76526
G01 X83.87294 Y45.73692
G01 X83.97937 Y45.68289
G01 X84.01148 Y45.66343
G01 X84.08483 Y45.61393
G01 X84.13362 Y45.57738
G01 X84.20594 Y45.51426
G01 X84.26974 Y45.45279
G01 X84.27139 Y45.45104
G01 X84.36852 Y45.33100
G01 X84.38859 Y45.30524
G01 X84.41732 Y45.25714
G01 X84.48094 Y45.14263
G01 X84.49179 Y45.11911
G01 X84.52489 Y45.03705
G01 X84.54871 Y44.96844
G01 X84.57035 Y44.88693
G01 X84.58882 Y44.80044
G01 X84.59110 Y44.78637
G01 X84.60342 Y44.64428
G01 X84.60619 Y44.59994
G01 X84.60528 Y44.58104
G01 X84.60342 Y44.55566
G01 X84.59110 Y44.41355
G01 X84.58882 Y44.39953
G01 X84.57035 Y44.31304
G01 X84.54871 Y44.23153
G01 X84.52489 Y44.16293
G01 X84.49179 Y44.08086
G01 X84.48094 Y44.05734
G01 X84.41732 Y43.94284
G01 X84.38859 Y43.89473
G01 X84.36852 Y43.86898
G01 X84.27139 Y43.74893
G01 X84.26974 Y43.74718
G01 X84.20594 Y43.68571
G01 X84.13362 Y43.62260
G01 X84.08483 Y43.58604
G01 X84.01148 Y43.53654
G01 X83.97940 Y43.51711
G01 X83.87294 Y43.46306
G01 X83.81150 Y43.43471
G01 X83.79151 Y43.42834
G01 X83.64152 Y43.38246
G01 X83.63269 Y43.37980
G01 X83.55450 Y43.36656
G01 X83.44762 Y43.35325
G01 X83.39850 Y43.35082
G01 X83.30990 Y43.35082
G01 X83.26073 Y43.35325
G01 X83.15384 Y43.36656
G01 X83.07566 Y43.37980
G01 X83.06682 Y43.38246
G01 X82.91684 Y43.42834
G01 X82.89685 Y43.43471
G01 X82.83540 Y43.46306
G01 X82.81938 Y43.47119
G01 X82.72898 Y43.51711
G01 X82.69687 Y43.53654
G01 X82.62352 Y43.58604
G01 X82.55885 Y43.63448
G01 X82.51351 Y43.66633
G01 X82.49598 Y43.67787
G01 X82.48847 Y43.68287
G01 X82.41801 Y43.73027
G01 X82.39106 Y43.74617
G01 X82.39101 Y43.74619
G01 X82.38847 Y43.74772
G01 X82.31128 Y43.76120
G01 X82.24158 Y43.76621
G01 X82.14836 Y43.76402
G01 X82.05725 Y43.74419
G01 X81.97155 Y43.70748
G01 X81.91024 Y43.67398
G01 X81.79868 Y43.59046
G01 X81.75418 Y43.54594
G01 X81.75418 Y43.71896
G01 X81.75865 Y43.72343
G01 X81.85212 Y43.83733
G01 X81.85814 Y43.84467
G01 X81.91151 Y43.92453
G01 X81.98544 Y44.06285
G01 X82.02220 Y44.15158
G01 X82.06772 Y44.30166
G01 X82.08417 Y44.38439
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.08417 Y44.81540 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.08417 Y44.81540
G01 X82.10066 Y44.89828
G01 X82.14618 Y45.04837
G01 X82.18293 Y45.13710
G01 X82.25687 Y45.27542
G01 X82.31023 Y45.35528
G01 X82.39217 Y45.45518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.10199 Y42.86783 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.10199 Y42.86783
G01 X79.00415 Y42.98706
G01 X78.93623 Y43.05498
G01 X78.81499 Y43.15447
G01 X78.73513 Y43.20784
G01 X78.59681 Y43.28175
G01 X78.50808 Y43.31851
G01 X78.35799 Y43.36405
G01 X78.27514 Y43.38053
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.84413 Y43.38053 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.84413 Y43.38053
G01 X77.76137 Y43.36405
G01 X77.61131 Y43.31851
G01 X77.52256 Y43.28175
G01 X77.38423 Y43.20784
G01 X77.31898 Y43.16423
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.78071 Y41.97447 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.78071 Y41.97447
G01 X76.78741 Y41.90642
G01 X76.80616 Y41.81221
G01 X76.85167 Y41.66212
G01 X76.88845 Y41.57337
G01 X76.96237 Y41.43507
G01 X77.01573 Y41.35521
G01 X77.11522 Y41.23398
G01 X77.18314 Y41.16606
G01 X77.21276 Y41.14175
G01 X77.29229 Y41.10368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.81357 Y40.15499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.81357 Y40.15499
G01 X79.81918 Y40.07637
G01 X79.89779 Y40.15499
G01 X79.81918 Y40.23360
G01 X79.81357 Y40.15499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.87733 Y35.14260 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.87733 Y35.14260
G01 X75.85226 Y35.15584
G01 X75.80738 Y35.17798
G01 X75.79600 Y35.18324
G01 X75.72572 Y35.21939
G01 X75.67669 Y35.24735
G01 X75.59209 Y35.28827
G01 X75.51055 Y35.32287
G01 X75.47426 Y35.33620
G01 X75.29112 Y35.38962
G01 X75.26168 Y35.39767
G01 X75.20418 Y35.40633
G01 X75.15198 Y35.41248
G01 X75.04223 Y35.42543
G01 X74.97591 Y35.42868
G01 X74.88744 Y35.42868
G01 X74.82115 Y35.42543
G01 X74.65917 Y35.40633
G01 X74.60164 Y35.39764
G01 X74.57223 Y35.38962
G01 X74.38909 Y35.33620
G01 X74.35280 Y35.32287
G01 X74.27126 Y35.28827
G01 X74.18665 Y35.24735
G01 X74.06898 Y35.18019
G01 X73.99661 Y35.13419
G01 X73.82526 Y34.99419
G01 X73.81726 Y34.98670
G01 X73.75569 Y34.92299
G01 X73.67556 Y34.83148
G01 X73.61020 Y34.74565
G01 X73.56009 Y34.67270
G01 X73.54703 Y34.65154
G01 X73.45176 Y34.47054
G01 X73.44411 Y34.45566
G01 X73.41889 Y34.38825
G01 X73.37223 Y34.24646
G01 X73.35242 Y34.16874
G01 X73.33476 Y34.08205
G01 X73.32684 Y34.03011
G01 X73.31213 Y33.85378
G01 X73.30954 Y33.80953
G01 X73.31213 Y33.76524
G01 X73.32684 Y33.58896
G01 X73.33476 Y33.53702
G01 X73.33591 Y33.52973
G01 X73.35242 Y33.45033
G01 X73.37223 Y33.37258
G01 X73.41889 Y33.23082
G01 X73.44411 Y33.16338
G01 X73.45176 Y33.14852
G01 X73.54703 Y32.96750
G01 X73.56009 Y32.94634
G01 X73.61020 Y32.87337
G01 X73.67556 Y32.78757
G01 X73.75572 Y32.69605
G01 X73.81627 Y32.63329
G01 X73.81724 Y32.63240
G01 X73.82524 Y32.62488
G01 X73.84264 Y32.61065
G01 X73.99661 Y32.48485
G01 X74.06903 Y32.43885
G01 X74.18665 Y32.37169
G01 X74.27129 Y32.33077
G01 X74.32033 Y32.30885
G01 X74.35274 Y32.29623
G01 X74.38907 Y32.28287
G01 X74.57220 Y32.22945
G01 X74.60164 Y32.22140
G01 X74.65917 Y32.21271
G01 X74.81802 Y32.19399
G01 X74.82122 Y32.19361
G01 X74.88744 Y32.19036
G01 X74.97591 Y32.19036
G01 X75.04215 Y32.19361
G01 X75.20418 Y32.21271
G01 X75.26168 Y32.22140
G01 X75.29115 Y32.22945
G01 X75.47426 Y32.28287
G01 X75.51060 Y32.29623
G01 X75.59206 Y32.33077
G01 X75.67672 Y32.37172
G01 X75.67913 Y32.37309
G01 X75.79432 Y32.43885
G01 X75.86674 Y32.48485
G01 X76.03809 Y32.62485
G01 X76.04611 Y32.63240
G01 X76.10763 Y32.69605
G01 X76.18779 Y32.78757
G01 X76.25312 Y32.87337
G01 X76.30326 Y32.94637
G01 X76.31632 Y32.96750
G01 X76.41159 Y33.14852
G01 X76.41924 Y33.16338
G01 X76.44446 Y33.23082
G01 X76.46569 Y33.29531
G01 X76.51558 Y33.41672
G01 X76.52947 Y33.44469
G01 X76.54642 Y33.48065
G01 X76.56442 Y33.52102
G01 X76.56684 Y33.53323
G01 X76.58932 Y33.76148
G01 X76.58932 Y33.85754
G01 X76.56684 Y34.08578
G01 X76.54812 Y34.18002
G01 X76.48152 Y34.39950
G01 X76.44477 Y34.48825
G01 X76.33664 Y34.69051
G01 X76.28327 Y34.77039
G01 X76.13778 Y34.94768
G01 X76.06986 Y35.01560
G01 X75.95002 Y35.11393
G01 X75.87733 Y35.14260
G01 X75.95000 Y35.11398
G01 X75.95002 Y35.11393
G01 X75.97824 Y35.10283
G01 X76.07766 Y35.10491
G01 X76.14682 Y35.11484
G01 X76.23737 Y35.13679
G01 X76.32213 Y35.17547
G01 X76.39803 Y35.22950
G01 X76.45084 Y35.27524
G01 X76.51515 Y35.34268
G01 X76.56552 Y35.42109
G01 X76.60016 Y35.50760
G01 X76.61985 Y35.57466
G01 X76.63968 Y35.71265
G01 X76.63968 Y35.73094
G01 X76.66381 Y35.91420
G01 X76.71164 Y36.09274
G01 X76.78238 Y36.26350
G01 X76.87479 Y36.42355
G01 X76.98731 Y36.57021
G01 X77.10966 Y36.69256
G01 X77.10966 Y36.51949
G01 X77.10522 Y36.51504
G01 X77.00572 Y36.39383
G01 X76.95236 Y36.31395
G01 X76.87844 Y36.17565
G01 X76.84169 Y36.08690
G01 X76.79615 Y35.93683
G01 X76.77743 Y35.84260
G01 X76.76204 Y35.68654
G01 X76.75967 Y35.63851
G01 X76.75967 Y34.83851
G01 X76.76204 Y34.79048
G01 X76.77743 Y34.63442
G01 X76.79615 Y34.54019
G01 X76.84169 Y34.39013
G01 X76.87844 Y34.30138
G01 X76.95236 Y34.16308
G01 X77.00572 Y34.08319
G01 X77.10522 Y33.96198
G01 X77.10966 Y33.95754
G01 X77.10966 Y33.70311
G01 X77.09521 Y33.70600
G01 X77.00250 Y33.71563
G01 X76.96948 Y33.71276
G01 X76.90964 Y33.70753
G01 X76.82000 Y33.68200
G01 X76.75492 Y33.65655
G01 X76.67184 Y33.61454
G01 X76.59818 Y33.55759
G01 X76.56285 Y33.51748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.62360 Y33.98830 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.62360 Y33.98830
G01 X79.54572 Y34.08319
G01 X79.49236 Y34.16308
G01 X79.41844 Y34.30138
G01 X79.38169 Y34.39013
G01 X79.33615 Y34.54019
G01 X79.31969 Y34.62297
G01 X79.31969 Y35.85398
G01 X79.30320 Y35.93683
G01 X79.25769 Y36.08690
G01 X79.22093 Y36.17565
G01 X79.14699 Y36.31395
G01 X79.09363 Y36.39383
G01 X78.99414 Y36.51504
G01 X78.98967 Y36.51954
G01 X78.98967 Y36.69259
G01 X79.03666 Y36.64557
G01 X79.09160 Y36.59825
G01 X79.12114 Y36.57638
G01 X79.21303 Y36.52271
G01 X79.31438 Y36.49017
G01 X79.38283 Y36.47615
G01 X79.47539 Y36.46620
G01 X79.56818 Y36.47397
G01 X79.62063 Y36.48870
G01 X79.62655 Y36.49228
G01 X79.65324 Y36.50849
G01 X79.65400 Y36.50905
G01 X79.71357 Y36.54877
G01 X79.73193 Y36.56007
G01 X79.82147 Y36.62274
G01 X79.85898 Y36.65251
G01 X79.89429 Y36.67915
G01 X79.93249 Y36.70163
G01 X80.03683 Y36.75962
G01 X80.07074 Y36.77567
G01 X80.15253 Y36.80955
G01 X80.18786 Y36.82218
G01 X80.27178 Y36.84615
G01 X80.30262 Y36.85494
G01 X80.34552 Y36.86607
G01 X80.38939 Y36.87222
G01 X80.50793 Y36.88585
G01 X80.54544 Y36.88768
G01 X80.63391 Y36.88768
G01 X80.67143 Y36.88585
G01 X80.78994 Y36.87222
G01 X80.83383 Y36.86607
G01 X80.87668 Y36.85497
G01 X80.99149 Y36.82218
G01 X81.02680 Y36.80955
G01 X81.10861 Y36.77567
G01 X81.14252 Y36.75964
G01 X81.24686 Y36.70163
G01 X81.28501 Y36.67918
G01 X81.32037 Y36.65251
G01 X81.41387 Y36.57831
G01 X81.44168 Y36.55309
G01 X81.45329 Y36.54237
G01 X81.50653 Y36.49241
G01 X81.52451 Y36.47598
G01 X81.56439 Y36.44049
G01 X81.62758 Y36.38888
G01 X81.64633 Y36.37481
G01 X81.68699 Y36.31395
G01 X81.76093 Y36.17565
G01 X81.79769 Y36.08690
G01 X81.84320 Y35.93683
G01 X81.85966 Y35.85398
G01 X81.85966 Y34.62297
G01 X81.84320 Y34.54019
G01 X81.79769 Y34.39013
G01 X81.76093 Y34.30138
G01 X81.68699 Y34.16308
G01 X81.64493 Y34.10011
G01 X81.64293 Y34.09854
G01 X81.62855 Y34.08738
G01 X81.60467 Y34.06823
G01 X81.54986 Y34.02284
G01 X81.50653 Y33.98464
G01 X81.45329 Y33.93468
G01 X81.44168 Y33.92396
G01 X81.41387 Y33.89874
G01 X81.32037 Y33.82455
G01 X81.28501 Y33.79788
G01 X81.24686 Y33.77542
G01 X81.14252 Y33.71743
G01 X81.10861 Y33.70138
G01 X81.02680 Y33.66750
G01 X80.99147 Y33.65485
G01 X80.87668 Y33.62208
G01 X80.83383 Y33.61098
G01 X80.78994 Y33.60484
G01 X80.67143 Y33.59120
G01 X80.63391 Y33.58937
G01 X80.54544 Y33.58937
G01 X80.50793 Y33.59120
G01 X80.38939 Y33.60484
G01 X80.34552 Y33.61098
G01 X80.30262 Y33.62211
G01 X80.18789 Y33.65485
G01 X80.15253 Y33.66752
G01 X80.07074 Y33.70138
G01 X80.03683 Y33.71743
G01 X79.93249 Y33.77542
G01 X79.89429 Y33.79790
G01 X79.85898 Y33.82455
G01 X79.82147 Y33.85431
G01 X79.76703 Y33.89429
G01 X79.73650 Y33.91502
G01 X79.73254 Y33.91769
G01 X79.65482 Y33.96988
G01 X79.62363 Y33.98830
G01 X79.62360 Y33.98830
G01 X79.62269 Y33.98886
G01 X79.54925 Y34.00222
G01 X79.47956 Y34.00722
G01 X79.38634 Y34.00504
G01 X79.29523 Y33.98520
G01 X79.20953 Y33.94850
G01 X79.14821 Y33.91499
G01 X79.03666 Y33.83148
G01 X78.98967 Y33.78446
G01 X78.98967 Y33.95749
G01 X78.99414 Y33.96198
G01 X79.09363 Y34.08319
G01 X79.14699 Y34.16308
G01 X79.22093 Y34.30138
G01 X79.25769 Y34.39013
G01 X79.30320 Y34.54019
G01 X79.31969 Y34.62297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.31969 Y35.85398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.31969 Y35.85398
G01 X79.33615 Y35.93683
G01 X79.38169 Y36.08690
G01 X79.41844 Y36.17565
G01 X79.49236 Y36.31395
G01 X79.54572 Y36.39383
G01 X79.62655 Y36.49228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.85966 Y34.62297 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.85966 Y34.62297
G01 X81.87615 Y34.54019
G01 X81.92169 Y34.39013
G01 X81.95844 Y34.30138
G01 X82.03236 Y34.16308
G01 X82.07305 Y34.10222
G01 X82.09177 Y34.08817
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.64293 Y34.09854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.64293 Y34.09854
G01 X81.68412 Y34.11619
G01 X81.77511 Y34.13597
G01 X81.86822 Y34.13821
G01 X81.93792 Y34.13323
G01 X82.01849 Y34.12066
G01 X82.07229 Y34.10278
G01 X82.09177 Y34.08817
G01 X82.15496 Y34.03656
G01 X82.19484 Y34.00108
G01 X82.21283 Y33.98464
G01 X82.26606 Y33.93468
G01 X82.27767 Y33.92396
G01 X82.30554 Y33.89871
G01 X82.37523 Y33.84337
G01 X82.39898 Y33.82455
G01 X82.43429 Y33.79790
G01 X82.47249 Y33.77542
G01 X82.57683 Y33.71743
G01 X82.61074 Y33.70138
G01 X82.69253 Y33.66752
G01 X82.72789 Y33.65485
G01 X82.84262 Y33.62211
G01 X82.88552 Y33.61098
G01 X82.92939 Y33.60484
G01 X83.04793 Y33.59120
G01 X83.08544 Y33.58937
G01 X83.17391 Y33.58937
G01 X83.21143 Y33.59120
G01 X83.32994 Y33.60484
G01 X83.37383 Y33.61098
G01 X83.41668 Y33.62208
G01 X83.53147 Y33.65485
G01 X83.56680 Y33.66750
G01 X83.64861 Y33.70138
G01 X83.68255 Y33.71743
G01 X83.78686 Y33.77542
G01 X83.84978 Y33.81383
G01 X83.86230 Y33.82218
G01 X83.96459 Y33.88144
G01 X84.00147 Y33.89983
G01 X84.02336 Y33.91118
G01 X84.02860 Y33.91390
G01 X84.02915 Y33.91421
G01 X84.12080 Y33.92739
G01 X84.21391 Y33.92294
G01 X84.30449 Y33.90097
G01 X84.37050 Y33.87811
G01 X84.41666 Y33.85718
G01 X84.41668 Y33.85718
G01 X84.50497 Y33.76379
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.02336 Y33.91118 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.02336 Y33.91118
G01 X84.07414 Y33.96198
G01 X84.17363 Y34.08319
G01 X84.22699 Y34.16308
G01 X84.30093 Y34.30138
G01 X84.33769 Y34.39013
G01 X84.37967 Y34.52851
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.77566 Y33.65878 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.77566 Y33.65878
G01 X86.77952 Y33.66003
G01 X86.79463 Y33.65965
G01 X86.88711 Y33.64857
G01 X86.97581 Y33.62020
G01 X87.05755 Y33.57557
G01 X87.11541 Y33.53641
G01 X87.18721 Y33.47712
G01 X87.24652 Y33.40532
G01 X87.29115 Y33.32358
G01 X87.31866 Y33.25937
G01 X87.35046 Y33.15345
G01 X87.35770 Y33.04311
G01 X87.35574 Y33.00204
G01 X87.34510 Y32.92122
G01 X87.32846 Y32.84472
G01 X87.31406 Y32.64352
G01 X87.31970 Y32.56491
G01 X87.44004 Y32.68525
G01 X87.44004 Y32.69155
G01 X87.45541 Y32.84761
G01 X87.47416 Y32.94182
G01 X87.51967 Y33.09191
G01 X87.55645 Y33.18066
G01 X87.63037 Y33.31896
G01 X87.68373 Y33.39882
G01 X87.78322 Y33.52005
G01 X87.85114 Y33.58797
G01 X87.97238 Y33.68746
G01 X88.05223 Y33.74083
G01 X88.19056 Y33.81477
G01 X88.27931 Y33.85152
G01 X88.42937 Y33.89704
G01 X88.52358 Y33.91578
G01 X88.67967 Y33.93115
G01 X88.68594 Y33.93115
G01 X88.71304 Y33.95825
G01 X88.67779 Y33.95124
G01 X88.52170 Y33.93587
G01 X88.42567 Y33.93587
G01 X88.26958 Y33.95124
G01 X88.22358 Y33.96038
G01 X88.14045 Y33.92940
G01 X87.96341 Y33.83272
G01 X87.86209 Y33.75688
G01 X87.73984 Y33.69010
G01 X87.67438 Y33.66567
G01 X87.58437 Y33.64154
G01 X87.49138 Y33.63488
G01 X87.39882 Y33.64593
G01 X87.33054 Y33.66079
G01 X87.24182 Y33.68916
G01 X87.16009 Y33.73382
G01 X87.08825 Y33.79310
G01 X87.03885 Y33.84250
G01 X86.98284 Y33.90956
G01 X86.95224 Y33.96331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.05703 Y32.64352 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.05703 Y32.64352
G01 X90.13564 Y32.72216
G01 X90.14128 Y32.64352
G01 X90.13564 Y32.56491
G01 X90.05703 Y32.64352
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.64906 Y31.23555 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.64906 Y31.23555
G01 X88.72767 Y31.31416
G01 X88.80631 Y31.23555
G01 X88.72767 Y31.22991
G01 X88.64906 Y31.23555
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.91327 Y28.34960 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.91327 Y28.34960
G01 X86.92320 Y28.31683
G01 X86.94195 Y28.22260
G01 X86.95732 Y28.06654
G01 X86.95968 Y28.01851
G01 X86.95968 Y27.21851
G01 X86.95732 Y27.17048
G01 X86.94195 Y27.01442
G01 X86.92359 Y26.92207
G01 X86.92254 Y26.92034
G01 X86.89186 Y26.86652
G01 X86.85859 Y26.80360
G01 X86.84632 Y26.77958
G01 X86.80692 Y26.69959
G01 X86.80075 Y26.68682
G01 X86.79079 Y26.66571
G01 X86.73281 Y26.56139
G01 X86.71033 Y26.52316
G01 X86.68366 Y26.48783
G01 X86.60946 Y26.39436
G01 X86.58424 Y26.36652
G01 X86.52168 Y26.30396
G01 X86.49387 Y26.27874
G01 X86.40037 Y26.20455
G01 X86.36501 Y26.17788
G01 X86.32686 Y26.15542
G01 X86.22252 Y26.09743
G01 X86.18861 Y26.08138
G01 X86.10680 Y26.04750
G01 X86.07147 Y26.03485
G01 X85.95668 Y26.00208
G01 X85.91383 Y25.99098
G01 X85.86994 Y25.98484
G01 X85.75143 Y25.97120
G01 X85.71391 Y25.96937
G01 X85.62544 Y25.96937
G01 X85.58793 Y25.97120
G01 X85.46939 Y25.98484
G01 X85.42552 Y25.99098
G01 X85.38262 Y26.00211
G01 X85.26789 Y26.03485
G01 X85.23253 Y26.04750
G01 X85.20131 Y26.05933
G01 X85.15074 Y26.08138
G01 X85.11683 Y26.09743
G01 X85.01249 Y26.15542
G01 X84.97431 Y26.17790
G01 X84.93898 Y26.20455
G01 X84.90881 Y26.22847
G01 X84.84551 Y26.27871
G01 X84.81767 Y26.30396
G01 X84.80606 Y26.31468
G01 X84.75283 Y26.36464
G01 X84.73484 Y26.38108
G01 X84.69496 Y26.41656
G01 X84.63177 Y26.46817
G01 X84.61229 Y26.48278
G01 X84.55849 Y26.50066
G01 X84.47792 Y26.51323
G01 X84.40822 Y26.51821
G01 X84.31511 Y26.51597
G01 X84.22412 Y26.49619
G01 X84.18293 Y26.47854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.63177 Y26.46817 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.63177 Y26.46817
G01 X84.61305 Y26.48222
G01 X84.57236 Y26.54308
G01 X84.49844 Y26.68138
G01 X84.46169 Y26.77013
G01 X84.41615 Y26.92019
G01 X84.39969 Y27.00297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.39969 Y28.23398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.39969 Y28.23398
G01 X84.38320 Y28.31683
G01 X84.33769 Y28.46690
G01 X84.30093 Y28.55565
G01 X84.22699 Y28.69395
G01 X84.18633 Y28.75481
G01 X84.18633 Y28.75483
G01 X84.16758 Y28.76888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.63080 Y28.76967 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.63080 Y28.76967
G01 X84.61450 Y28.75699
G01 X84.57236 Y28.69395
G01 X84.49844 Y28.55565
G01 X84.46169 Y28.46690
G01 X84.41615 Y28.31683
G01 X84.39969 Y28.23398
G01 X84.39969 Y27.00297
G01 X84.38320 Y26.92019
G01 X84.33769 Y26.77013
G01 X84.30093 Y26.68138
G01 X84.22699 Y26.54308
G01 X84.18493 Y26.48011
G01 X84.18293 Y26.47854
G01 X84.16855 Y26.46738
G01 X84.14467 Y26.44823
G01 X84.08986 Y26.40284
G01 X84.04653 Y26.36464
G01 X83.99329 Y26.31468
G01 X83.98168 Y26.30396
G01 X83.95384 Y26.27871
G01 X83.86037 Y26.20455
G01 X83.80416 Y26.16337
G01 X83.78834 Y26.15268
G01 X83.74325 Y26.12022
G01 X83.71102 Y26.09553
G01 X83.66238 Y26.05565
G01 X83.64020 Y26.03624
G01 X83.57808 Y26.01051
G01 X83.42799 Y25.96497
G01 X83.33378 Y25.94625
G01 X83.17772 Y25.93086
G01 X83.08166 Y25.93086
G01 X82.92558 Y25.94625
G01 X82.83137 Y25.96497
G01 X82.82743 Y25.96619
G01 X82.82182 Y25.96939
G01 X82.77053 Y25.99891
G01 X82.70762 Y26.03216
G01 X82.69055 Y26.04097
G01 X82.61062 Y26.08115
G01 X82.59129 Y26.09058
G01 X82.57691 Y26.09738
G01 X82.47249 Y26.15542
G01 X82.43431 Y26.17790
G01 X82.39898 Y26.20455
G01 X82.36881 Y26.22847
G01 X82.30551 Y26.27871
G01 X82.27767 Y26.30396
G01 X82.26606 Y26.31468
G01 X82.21283 Y26.36464
G01 X82.19484 Y26.38108
G01 X82.15496 Y26.41656
G01 X82.09177 Y26.46817
G01 X82.07229 Y26.48278
G01 X82.01849 Y26.50066
G01 X81.93792 Y26.51323
G01 X81.86822 Y26.51821
G01 X81.77511 Y26.51597
G01 X81.68412 Y26.49619
G01 X81.64293 Y26.47854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.09177 Y26.46817 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.09177 Y26.46817
G01 X82.07305 Y26.48222
G01 X82.03236 Y26.54308
G01 X81.95844 Y26.68138
G01 X81.92169 Y26.77013
G01 X81.87615 Y26.92019
G01 X81.85966 Y27.00297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.85966 Y28.23398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.85966 Y28.23398
G01 X81.87615 Y28.31683
G01 X81.92169 Y28.46690
G01 X81.95844 Y28.55565
G01 X82.03236 Y28.69395
G01 X82.07450 Y28.75699
G01 X82.09080 Y28.76967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.62758 Y28.76888 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.62758 Y28.76888
G01 X81.64633 Y28.75483
G01 X81.64633 Y28.75481
G01 X81.68699 Y28.69395
G01 X81.76093 Y28.55565
G01 X81.79769 Y28.46690
G01 X81.84320 Y28.31683
G01 X81.85966 Y28.23398
G01 X81.85966 Y27.00297
G01 X81.84320 Y26.92019
G01 X81.79769 Y26.77013
G01 X81.76093 Y26.68138
G01 X81.68699 Y26.54308
G01 X81.64493 Y26.48011
G01 X81.64293 Y26.47854
G01 X81.62855 Y26.46738
G01 X81.60467 Y26.44823
G01 X81.54986 Y26.40284
G01 X81.50653 Y26.36464
G01 X81.45329 Y26.31468
G01 X81.44168 Y26.30396
G01 X81.41387 Y26.27874
G01 X81.32037 Y26.20455
G01 X81.28501 Y26.17788
G01 X81.24686 Y26.15542
G01 X81.14252 Y26.09743
G01 X81.10861 Y26.08138
G01 X81.02680 Y26.04750
G01 X80.99147 Y26.03485
G01 X80.87668 Y26.00208
G01 X80.83383 Y25.99098
G01 X80.78994 Y25.98484
G01 X80.67143 Y25.97120
G01 X80.63391 Y25.96937
G01 X80.54544 Y25.96937
G01 X80.50793 Y25.97120
G01 X80.38939 Y25.98484
G01 X80.34552 Y25.99098
G01 X80.30262 Y26.00211
G01 X80.18789 Y26.03485
G01 X80.15253 Y26.04750
G01 X80.12131 Y26.05933
G01 X80.07074 Y26.08138
G01 X80.03683 Y26.09743
G01 X79.93249 Y26.15542
G01 X79.89431 Y26.17790
G01 X79.85898 Y26.20455
G01 X79.82881 Y26.22847
G01 X79.76551 Y26.27871
G01 X79.73767 Y26.30396
G01 X79.72606 Y26.31468
G01 X79.67283 Y26.36464
G01 X79.65484 Y26.38108
G01 X79.61496 Y26.41656
G01 X79.55177 Y26.46817
G01 X79.53229 Y26.48278
G01 X79.47849 Y26.50066
G01 X79.39792 Y26.51323
G01 X79.32822 Y26.51821
G01 X79.23511 Y26.51597
G01 X79.14412 Y26.49619
G01 X79.10293 Y26.47854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.55177 Y26.46817 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.55177 Y26.46817
G01 X79.53305 Y26.48222
G01 X79.49236 Y26.54308
G01 X79.41844 Y26.68138
G01 X79.38169 Y26.77013
G01 X79.33615 Y26.92019
G01 X79.31969 Y27.00297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.31969 Y28.23398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.31969 Y28.23398
G01 X79.30320 Y28.31683
G01 X79.25769 Y28.46690
G01 X79.22093 Y28.55565
G01 X79.14699 Y28.69395
G01 X79.10633 Y28.75481
G01 X79.10633 Y28.75483
G01 X79.08758 Y28.76888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.55080 Y28.76967 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.55080 Y28.76967
G01 X79.53450 Y28.75699
G01 X79.49236 Y28.69395
G01 X79.41844 Y28.55565
G01 X79.38169 Y28.46690
G01 X79.33615 Y28.31683
G01 X79.31969 Y28.23398
G01 X79.31969 Y27.00297
G01 X79.30320 Y26.92019
G01 X79.25769 Y26.77013
G01 X79.22093 Y26.68138
G01 X79.14699 Y26.54308
G01 X79.10493 Y26.48011
G01 X79.10293 Y26.47854
G01 X79.08855 Y26.46738
G01 X79.06467 Y26.44823
G01 X79.00986 Y26.40284
G01 X78.96653 Y26.36464
G01 X78.91329 Y26.31468
G01 X78.90168 Y26.30396
G01 X78.87387 Y26.27874
G01 X78.78037 Y26.20455
G01 X78.74501 Y26.17788
G01 X78.70686 Y26.15542
G01 X78.60252 Y26.09743
G01 X78.56861 Y26.08138
G01 X78.48680 Y26.04750
G01 X78.45147 Y26.03485
G01 X78.33668 Y26.00208
G01 X78.29383 Y25.99098
G01 X78.24994 Y25.98484
G01 X78.13143 Y25.97120
G01 X78.09391 Y25.96937
G01 X78.00544 Y25.96937
G01 X77.96793 Y25.97120
G01 X77.84938 Y25.98484
G01 X77.80552 Y25.99098
G01 X77.76262 Y26.00211
G01 X77.64789 Y26.03485
G01 X77.61253 Y26.04750
G01 X77.58131 Y26.05933
G01 X77.53074 Y26.08138
G01 X77.49683 Y26.09743
G01 X77.39249 Y26.15542
G01 X77.35429 Y26.17790
G01 X77.31898 Y26.20455
G01 X77.22681 Y26.27770
G01 X77.22546 Y26.27874
G01 X77.19767 Y26.30394
G01 X77.13509 Y26.36652
G01 X77.10989 Y26.39433
G01 X77.03570 Y26.48783
G01 X77.00903 Y26.52319
G01 X76.98657 Y26.56134
G01 X76.92858 Y26.66563
G01 X76.91253 Y26.69959
G01 X76.87865 Y26.78138
G01 X76.86602 Y26.81671
G01 X76.83326 Y26.93147
G01 X76.82213 Y26.97434
G01 X76.81599 Y27.01823
G01 X76.80491 Y27.11455
G01 X76.79610 Y27.17386
G01 X76.79005 Y27.20701
G01 X76.78802 Y27.21851
G01 X76.78144 Y27.25738
G01 X76.75967 Y27.32895
G01 X76.75967 Y27.32898
G01 X76.74532 Y27.37622
G01 X76.67159 Y27.46319
G01 X76.62023 Y27.51056
G01 X76.54606 Y27.56693
G01 X76.46260 Y27.60823
G01 X76.37281 Y27.63299
G01 X76.30400 Y27.64508
G01 X76.21114 Y27.65240
G01 X76.11855 Y27.64203
G01 X76.10654 Y27.63827
G01 X76.10237 Y27.63594
G01 X76.13778 Y27.67134
G01 X76.28327 Y27.84864
G01 X76.33664 Y27.92852
G01 X76.44477 Y28.13078
G01 X76.48152 Y28.21953
G01 X76.54812 Y28.43901
G01 X76.56684 Y28.53322
G01 X76.58932 Y28.76149
G01 X76.58932 Y28.85755
G01 X76.56684 Y29.08579
G01 X76.56303 Y29.10497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.18312 Y28.95082 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.18312 Y28.95082
G01 X77.13128 Y28.92110
G01 X77.10522 Y28.89504
G01 X77.00572 Y28.77383
G01 X76.95236 Y28.69395
G01 X76.87844 Y28.55565
G01 X76.84169 Y28.46690
G01 X76.79615 Y28.31683
G01 X76.77743 Y28.22260
G01 X76.76204 Y28.06654
G01 X76.75967 Y28.01851
G01 X76.75967 Y27.32898
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.10237 Y27.63594 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.10237 Y27.63594
G01 X76.06181 Y27.61318
G01 X76.03633 Y27.59834
G01 X75.97586 Y27.56192
G01 X75.86895 Y27.48666
G01 X75.86671 Y27.48483
G01 X75.79775 Y27.44079
G01 X75.67669 Y27.37170
G01 X75.59209 Y27.33078
G01 X75.51055 Y27.29619
G01 X75.47426 Y27.28285
G01 X75.29112 Y27.22944
G01 X75.26171 Y27.22141
G01 X75.20418 Y27.21272
G01 X75.04215 Y27.19362
G01 X74.97591 Y27.19037
G01 X74.88744 Y27.19037
G01 X74.82122 Y27.19362
G01 X74.81802 Y27.19400
G01 X74.65917 Y27.21272
G01 X74.60164 Y27.22141
G01 X74.57223 Y27.22944
G01 X74.38909 Y27.28285
G01 X74.35280 Y27.29619
G01 X74.27126 Y27.33078
G01 X74.18665 Y27.37170
G01 X74.06898 Y27.43886
G01 X73.99664 Y27.48483
G01 X73.92392 Y27.54427
G01 X73.82526 Y27.62486
G01 X73.81726 Y27.63236
G01 X73.80764 Y27.64153
G01 X73.75569 Y27.69606
G01 X73.67553 Y27.78760
G01 X73.61020 Y27.87338
G01 X73.56009 Y27.94635
G01 X73.54703 Y27.96748
G01 X73.45176 Y28.14848
G01 X73.44411 Y28.16337
G01 X73.41889 Y28.23081
G01 X73.37223 Y28.37259
G01 X73.35242 Y28.45031
G01 X73.33476 Y28.53700
G01 X73.33395 Y28.54246
G01 X73.32684 Y28.58894
G01 X73.31213 Y28.76527
G01 X73.30954 Y28.80952
G01 X73.31213 Y28.85382
G01 X73.32684 Y29.03009
G01 X73.33476 Y29.08204
G01 X73.35242 Y29.16873
G01 X73.37223 Y29.24647
G01 X73.41889 Y29.38823
G01 X73.44411 Y29.45564
G01 X73.45176 Y29.47053
G01 X73.54703 Y29.65155
G01 X73.56009 Y29.67271
G01 X73.61020 Y29.74569
G01 X73.67556 Y29.83149
G01 X73.75572 Y29.92300
G01 X73.81724 Y29.98666
G01 X73.82526 Y29.99417
G01 X73.99661 Y30.13420
G01 X74.06903 Y30.18020
G01 X74.18665 Y30.24736
G01 X74.27129 Y30.28828
G01 X74.35274 Y30.32283
G01 X74.38909 Y30.33619
G01 X74.57220 Y30.38960
G01 X74.60166 Y30.39768
G01 X74.65917 Y30.40634
G01 X74.82115 Y30.42544
G01 X74.88744 Y30.42869
G01 X74.97591 Y30.42869
G01 X75.04218 Y30.42544
G01 X75.15196 Y30.41249
G01 X75.20418 Y30.40634
G01 X75.26171 Y30.39765
G01 X75.29115 Y30.38960
G01 X75.47426 Y30.33619
G01 X75.51060 Y30.32283
G01 X75.59206 Y30.28828
G01 X75.67669 Y30.24736
G01 X75.79432 Y30.18020
G01 X75.86679 Y30.13418
G01 X75.86897 Y30.13238
G01 X76.03806 Y29.99420
G01 X76.04611 Y29.98666
G01 X76.10763 Y29.92300
G01 X76.11606 Y29.91340
G01 X76.18779 Y29.83149
G01 X76.25312 Y29.74569
G01 X76.30326 Y29.67269
G01 X76.31632 Y29.65155
G01 X76.41159 Y29.47053
G01 X76.41924 Y29.45564
G01 X76.44446 Y29.38823
G01 X76.46491 Y29.32610
G01 X76.47773 Y29.28973
G01 X76.48520 Y29.26997
G01 X76.52782 Y29.17386
G01 X76.56031 Y29.11046
G01 X76.56303 Y29.10497
G01 X76.56493 Y29.10116
G01 X76.60791 Y29.05918
G01 X76.68043 Y29.00073
G01 X76.76272 Y28.95704
G01 X76.85177 Y28.92974
G01 X76.92023 Y28.91569
G01 X77.01286 Y28.90573
G01 X77.10570 Y28.91348
G01 X77.12975 Y28.92021
G01 X77.13123 Y28.92105
G01 X77.18312 Y28.95082
G01 X77.18932 Y28.95440
G01 X77.25045 Y28.99006
G01 X77.31809 Y29.03357
G01 X77.35406 Y29.05902
G01 X77.39249 Y29.08163
G01 X77.49683 Y29.13962
G01 X77.53074 Y29.15567
G01 X77.61253 Y29.18955
G01 X77.64786 Y29.20218
G01 X77.76262 Y29.23494
G01 X77.80552 Y29.24607
G01 X77.84938 Y29.25222
G01 X77.96793 Y29.26585
G01 X78.00544 Y29.26768
G01 X78.09391 Y29.26768
G01 X78.13143 Y29.26585
G01 X78.24994 Y29.25222
G01 X78.29383 Y29.24607
G01 X78.33668 Y29.23497
G01 X78.45149 Y29.20218
G01 X78.48680 Y29.18955
G01 X78.56861 Y29.15567
G01 X78.60252 Y29.13964
G01 X78.70686 Y29.08163
G01 X78.74501 Y29.05918
G01 X78.78037 Y29.03251
G01 X78.87387 Y28.95831
G01 X78.90168 Y28.93309
G01 X78.91329 Y28.92237
G01 X78.96653 Y28.87241
G01 X78.98451 Y28.85598
G01 X79.02439 Y28.82049
G01 X79.08758 Y28.76888
G01 X79.10633 Y28.75481
G01 X79.10707 Y28.75427
G01 X79.16086 Y28.73639
G01 X79.24143 Y28.72382
G01 X79.31113 Y28.71884
G01 X79.40425 Y28.72108
G01 X79.49523 Y28.74086
G01 X79.53643 Y28.75852
G01 X79.55080 Y28.76967
G01 X79.57468 Y28.78882
G01 X79.62949 Y28.83421
G01 X79.67283 Y28.87241
G01 X79.72611 Y28.92245
G01 X79.73767 Y28.93312
G01 X79.76551 Y28.95834
G01 X79.85898 Y29.03251
G01 X79.89429 Y29.05915
G01 X79.93249 Y29.08163
G01 X80.03683 Y29.13962
G01 X80.07074 Y29.15567
G01 X80.15253 Y29.18955
G01 X80.18786 Y29.20218
G01 X80.30262 Y29.23494
G01 X80.34552 Y29.24607
G01 X80.38939 Y29.25222
G01 X80.50793 Y29.26585
G01 X80.54544 Y29.26768
G01 X80.63391 Y29.26768
G01 X80.67143 Y29.26585
G01 X80.78994 Y29.25222
G01 X80.83383 Y29.24607
G01 X80.87668 Y29.23497
G01 X80.99149 Y29.20218
G01 X81.02680 Y29.18955
G01 X81.10861 Y29.15567
G01 X81.14252 Y29.13964
G01 X81.24686 Y29.08163
G01 X81.28501 Y29.05918
G01 X81.32037 Y29.03251
G01 X81.41387 Y28.95831
G01 X81.44168 Y28.93309
G01 X81.45329 Y28.92237
G01 X81.50653 Y28.87241
G01 X81.52451 Y28.85598
G01 X81.56439 Y28.82049
G01 X81.62758 Y28.76888
G01 X81.64633 Y28.75481
G01 X81.64707 Y28.75427
G01 X81.70086 Y28.73639
G01 X81.78143 Y28.72382
G01 X81.85113 Y28.71884
G01 X81.94425 Y28.72108
G01 X82.03523 Y28.74086
G01 X82.07643 Y28.75852
G01 X82.09080 Y28.76967
G01 X82.11468 Y28.78882
G01 X82.16949 Y28.83421
G01 X82.21283 Y28.87241
G01 X82.26611 Y28.92245
G01 X82.27767 Y28.93312
G01 X82.30551 Y28.95834
G01 X82.39898 Y29.03251
G01 X82.43429 Y29.05915
G01 X82.47249 Y29.08163
G01 X82.57683 Y29.13962
G01 X82.61074 Y29.15567
G01 X82.69253 Y29.18955
G01 X82.72786 Y29.20218
G01 X82.84262 Y29.23494
G01 X82.88552 Y29.24607
G01 X82.92939 Y29.25222
G01 X83.04793 Y29.26585
G01 X83.08544 Y29.26768
G01 X83.17391 Y29.26768
G01 X83.21143 Y29.26585
G01 X83.32994 Y29.25222
G01 X83.37383 Y29.24607
G01 X83.41668 Y29.23497
G01 X83.53149 Y29.20218
G01 X83.56680 Y29.18955
G01 X83.64861 Y29.15567
G01 X83.68252 Y29.13964
G01 X83.78686 Y29.08163
G01 X83.82501 Y29.05918
G01 X83.86037 Y29.03251
G01 X83.95387 Y28.95831
G01 X83.98168 Y28.93309
G01 X83.99329 Y28.92237
G01 X84.04653 Y28.87241
G01 X84.06451 Y28.85598
G01 X84.10439 Y28.82049
G01 X84.16758 Y28.76888
G01 X84.18633 Y28.75481
G01 X84.18707 Y28.75427
G01 X84.24086 Y28.73639
G01 X84.32143 Y28.72382
G01 X84.39113 Y28.71884
G01 X84.48425 Y28.72108
G01 X84.57523 Y28.74086
G01 X84.61643 Y28.75852
G01 X84.63080 Y28.76967
G01 X84.65468 Y28.78882
G01 X84.70949 Y28.83421
G01 X84.75283 Y28.87241
G01 X84.80611 Y28.92245
G01 X84.81767 Y28.93312
G01 X84.84551 Y28.95834
G01 X84.93898 Y29.03251
G01 X84.97429 Y29.05915
G01 X85.01249 Y29.08163
G01 X85.11683 Y29.13962
G01 X85.15074 Y29.15567
G01 X85.23253 Y29.18955
G01 X85.26786 Y29.20218
G01 X85.38262 Y29.23494
G01 X85.42552 Y29.24607
G01 X85.46939 Y29.25222
G01 X85.58793 Y29.26585
G01 X85.62544 Y29.26768
G01 X85.71391 Y29.26768
G01 X85.75143 Y29.26585
G01 X85.86994 Y29.25222
G01 X85.91383 Y29.24607
G01 X85.95668 Y29.23497
G01 X86.07149 Y29.20218
G01 X86.10680 Y29.18955
G01 X86.18861 Y29.15567
G01 X86.22252 Y29.13964
G01 X86.32686 Y29.08163
G01 X86.36501 Y29.05918
G01 X86.40037 Y29.03251
G01 X86.49384 Y28.95831
G01 X86.52168 Y28.93309
G01 X86.58424 Y28.87053
G01 X86.60954 Y28.84261
G01 X86.68366 Y28.74922
G01 X86.71033 Y28.71389
G01 X86.73281 Y28.67566
G01 X86.79161 Y28.56984
G01 X86.80804 Y28.53807
G01 X86.82331 Y28.50993
G01 X86.84373 Y28.46995
G01 X86.84929 Y28.45836
G01 X86.91571 Y28.34546
G01 X86.98102 Y28.29611
G01 X87.04129 Y28.26075
G01 X87.12580 Y28.22143
G01 X87.21624 Y28.19885
G01 X87.30934 Y28.19380
G01 X87.37916 Y28.19667
G01 X87.47141 Y28.20932
G01 X87.55960 Y28.23919
G01 X87.59636 Y28.26009
G01 X87.60172 Y28.26532
G01 X87.63298 Y28.29596
G01 X87.64599 Y28.31064
G01 X87.68142 Y28.34853
G01 X87.70989 Y28.37736
G01 X87.76984 Y28.44437
G01 X87.81045 Y28.49458
G01 X87.81210 Y28.49631
G01 X87.87591 Y28.55780
G01 X87.94822 Y28.62092
G01 X87.99702 Y28.65745
G01 X88.07035 Y28.70693
G01 X88.10248 Y28.72641
G01 X88.20890 Y28.78044
G01 X88.27034 Y28.80881
G01 X88.29033 Y28.81518
G01 X88.44030 Y28.86103
G01 X88.44921 Y28.86372
G01 X88.51050 Y28.87470
G01 X88.52742 Y28.87698
G01 X88.63423 Y28.89027
G01 X88.68345 Y28.89268
G01 X88.77192 Y28.89268
G01 X88.82112 Y28.89027
G01 X88.91865 Y28.87812
G01 X88.92793 Y28.87696
G01 X89.00618 Y28.86372
G01 X89.01502 Y28.86106
G01 X89.16501 Y28.81518
G01 X89.18500 Y28.80881
G01 X89.24649 Y28.78044
G01 X89.35289 Y28.72641
G01 X89.38505 Y28.70693
G01 X89.45835 Y28.65745
G01 X89.50712 Y28.62092
G01 X89.57944 Y28.55780
G01 X89.64321 Y28.49636
G01 X89.64487 Y28.49458
G01 X89.74200 Y28.37457
G01 X89.76209 Y28.34879
G01 X89.79084 Y28.30065
G01 X89.85444 Y28.18615
G01 X89.86531 Y28.16261
G01 X89.89838 Y28.08059
G01 X89.92221 Y28.01198
G01 X89.94385 Y27.93050
G01 X89.96231 Y27.84399
G01 X89.96460 Y27.82994
G01 X89.97608 Y27.69746
G01 X89.97692 Y27.68783
G01 X89.97969 Y27.64351
G01 X89.97692 Y27.59921
G01 X89.96460 Y27.45710
G01 X89.96231 Y27.44307
G01 X89.94385 Y27.35659
G01 X89.92221 Y27.27505
G01 X89.89838 Y27.20647
G01 X89.86529 Y27.12438
G01 X89.85444 Y27.10091
G01 X89.79081 Y26.98638
G01 X89.76209 Y26.93828
G01 X89.74202 Y26.91252
G01 X89.64489 Y26.79245
G01 X89.64324 Y26.79070
G01 X89.57944 Y26.72926
G01 X89.50712 Y26.66611
G01 X89.45833 Y26.62959
G01 X89.38497 Y26.58008
G01 X89.35289 Y26.56065
G01 X89.24644 Y26.50660
G01 X89.18500 Y26.47826
G01 X89.16509 Y26.47191
G01 X89.09691 Y26.45105
G01 X89.01627 Y26.42215
G01 X88.97768 Y26.40622
G01 X88.93011 Y26.38806
G01 X88.91215 Y26.38176
G01 X88.87499 Y26.36566
G01 X88.86862 Y26.36289
G01 X88.83334 Y26.33482
G01 X88.77326 Y26.26502
G01 X88.72752 Y26.18560
G01 X88.68635 Y26.25921
G01 X88.62635 Y26.33035
G01 X88.58528 Y26.36360
G01 X88.54797 Y26.37981
G01 X88.52523 Y26.38788
G01 X88.48081 Y26.40493
G01 X88.43905 Y26.42215
G01 X88.35843 Y26.45105
G01 X88.29028 Y26.47191
G01 X88.27032 Y26.47826
G01 X88.20895 Y26.50658
G01 X88.10248 Y26.56063
G01 X88.07040 Y26.58006
G01 X87.99702 Y26.62959
G01 X87.94825 Y26.66611
G01 X87.87591 Y26.72926
G01 X87.81208 Y26.79075
G01 X87.81045 Y26.79248
G01 X87.78360 Y26.82565
G01 X87.72897 Y26.88727
G01 X87.70834 Y26.90851
G01 X87.69783 Y26.91950
G01 X87.64492 Y26.97582
G01 X87.60852 Y27.00896
G01 X87.55645 Y27.10637
G01 X87.51967 Y27.19512
G01 X87.47416 Y27.34521
G01 X87.45541 Y27.43942
G01 X87.44004 Y27.59547
G01 X87.44004 Y27.69154
G01 X87.45541 Y27.84762
G01 X87.47416 Y27.94183
G01 X87.51967 Y28.09189
G01 X87.55645 Y28.18064
G01 X87.60172 Y28.26532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.91998 Y26.91585 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.91998 Y26.91585
G01 X86.94571 Y26.94219
G01 X87.02221 Y26.99532
G01 X87.10738 Y27.03302
G01 X87.17367 Y27.05509
G01 X87.26453 Y27.07599
G01 X87.35770 Y27.07932
G01 X87.44980 Y27.06492
G01 X87.51749 Y27.04762
G01 X87.60149 Y27.01536
G01 X87.64492 Y26.97582
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.54797 Y26.37981 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.54797 Y26.37981
G01 X88.58061 Y26.36563
G01 X88.67967 Y26.35588
G01 X88.77570 Y26.35588
G01 X88.87499 Y26.36566
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.45549 Y25.36596 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.45549 Y25.36596
G01 X88.38312 Y25.34465
G01 X88.31487 Y25.33510
G01 X88.18861 Y25.32624
G01 X88.09216 Y25.32624
G01 X88.04690 Y25.32510
G01 X88.02739 Y25.32314
G01 X87.93039 Y25.29749
G01 X87.84627 Y25.25464
G01 X87.77294 Y25.19523
G01 X87.71353 Y25.12190
G01 X87.67068 Y25.03777
G01 X87.64502 Y24.94077
G01 X87.64307 Y24.92124
G01 X87.64192 Y24.87597
G01 X87.64192 Y23.17598
G01 X87.64307 Y23.13074
G01 X87.64502 Y23.11116
G01 X87.65760 Y23.05822
G01 X87.67068 Y23.01420
G01 X87.71350 Y22.93013
G01 X87.77294 Y22.85672
G01 X87.82882 Y22.81034
G01 X87.84627 Y22.79736
G01 X87.88693 Y22.77524
G01 X87.93039 Y22.75449
G01 X88.02739 Y22.72883
G01 X88.04693 Y22.72688
G01 X88.09216 Y22.72574
G01 X89.79216 Y22.72574
G01 X89.83742 Y22.72688
G01 X89.85696 Y22.72883
G01 X89.95396 Y22.75449
G01 X89.99125 Y22.77212
G01 X90.11685 Y23.17598
G01 X90.11685 Y24.87597
G01 X89.99125 Y25.27986
G01 X89.95403 Y25.29746
G01 X89.90036 Y25.31308
G01 X89.85696 Y25.32314
G01 X89.83742 Y25.32510
G01 X89.79216 Y25.32624
G01 X89.26679 Y25.32624
G01 X89.13732 Y25.33554
G01 X89.06745 Y25.34559
G01 X88.99955 Y25.36596
G01 X88.93826 Y25.38438
G01 X88.89678 Y25.41102
G01 X88.82935 Y25.47534
G01 X88.78360 Y25.52814
G01 X88.72963 Y25.60399
G01 X88.72739 Y25.60886
G01 X88.72168 Y25.59677
G01 X88.66669 Y25.52169
G01 X88.62023 Y25.46949
G01 X88.55279 Y25.40673
G01 X88.51650 Y25.38395
G01 X88.45549 Y25.36596
G01 X88.99955 Y25.36596
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.49404 Y22.26368 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.49404 Y22.26368
G01 X91.49404 Y26.73152
G01 X91.49465 Y26.74076
G01 X91.50349 Y26.77376
G01 X91.51238 Y26.78918
G01 X91.52497 Y26.80178
G01 X91.54042 Y26.81069
G01 X91.57326 Y26.81948
G01 X91.58253 Y26.82009
G01 X93.69340 Y26.82009
G01 X93.70267 Y26.81948
G01 X93.73551 Y26.81069
G01 X93.75095 Y26.80178
G01 X93.76355 Y26.78918
G01 X93.77244 Y26.77376
G01 X93.77706 Y26.75651
G01 X93.77706 Y26.73868
G01 X93.77244 Y26.72144
G01 X93.76355 Y26.70602
G01 X93.75098 Y26.69344
G01 X93.73551 Y26.68453
G01 X93.70262 Y26.67572
G01 X93.69340 Y26.67511
G01 X92.12904 Y26.67511
G01 X92.03343 Y26.66568
G01 X91.94151 Y26.63779
G01 X91.85680 Y26.59253
G01 X91.78253 Y26.53160
G01 X91.72159 Y26.45733
G01 X91.67633 Y26.37262
G01 X91.64844 Y26.28069
G01 X91.63902 Y26.18509
G01 X91.63902 Y25.16723
G01 X91.64844 Y25.07165
G01 X91.67633 Y24.97973
G01 X91.72159 Y24.89502
G01 X91.78253 Y24.82075
G01 X91.85680 Y24.75982
G01 X91.94151 Y24.71456
G01 X92.03343 Y24.68667
G01 X92.12904 Y24.67724
G01 X93.05045 Y24.67724
G01 X93.05972 Y24.67663
G01 X93.09269 Y24.66779
G01 X93.10810 Y24.65890
G01 X93.12070 Y24.64631
G01 X93.12962 Y24.63086
G01 X93.13422 Y24.61367
G01 X93.13422 Y24.59581
G01 X93.12962 Y24.57862
G01 X93.12070 Y24.56320
G01 X93.10808 Y24.55057
G01 X93.09266 Y24.54166
G01 X93.05979 Y24.53287
G01 X93.05052 Y24.53226
G01 X92.12904 Y24.53226
G01 X92.03343 Y24.52284
G01 X91.94151 Y24.49495
G01 X91.85680 Y24.44968
G01 X91.78253 Y24.38875
G01 X91.72159 Y24.31448
G01 X91.67633 Y24.22977
G01 X91.64844 Y24.13785
G01 X91.63902 Y24.04224
G01 X91.63902 Y22.26361
G01 X91.63841 Y22.25434
G01 X91.62962 Y22.22150
G01 X91.62071 Y22.20605
G01 X91.60808 Y22.19343
G01 X91.59264 Y22.18451
G01 X91.57544 Y22.17992
G01 X91.55761 Y22.17992
G01 X91.54042 Y22.18451
G01 X91.52497 Y22.19343
G01 X91.51238 Y22.20603
G01 X91.50349 Y22.22144
G01 X91.49465 Y22.25444
G01 X91.49404 Y22.26368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.55680 Y17.85193 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.55680 Y17.85193
G01 X91.54928 Y17.81063
G01 X91.54430 Y17.74096
G01 X91.54654 Y17.64789
G01 X91.56630 Y17.55691
G01 X91.58477 Y17.51373
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.25667 Y17.62176 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.25667 Y17.62176
G01 X91.30242 Y17.64612
G01 X91.38228 Y17.69948
G01 X91.51108 Y17.80520
G01 X91.55583 Y17.84998
G01 X91.55680 Y17.85193
G01 X91.57054 Y17.88015
G01 X91.63826 Y17.99727
G01 X91.65693 Y18.02475
G01 X91.65898 Y18.02783
G01 X91.67394 Y18.05003
G01 X91.70389 Y18.10004
G01 X91.76508 Y18.21010
G01 X91.78250 Y18.24700
G01 X91.81639 Y18.32874
G01 X91.83013 Y18.36717
G01 X91.86470 Y18.48823
G01 X91.87580 Y18.53108
G01 X91.88195 Y18.57497
G01 X91.89632 Y18.69999
G01 X91.89833 Y18.74078
G01 X91.89833 Y18.82925
G01 X91.89632 Y18.87004
G01 X91.88195 Y18.99509
G01 X91.87580 Y19.03898
G01 X91.86470 Y19.08183
G01 X91.83013 Y19.20288
G01 X91.81639 Y19.24131
G01 X91.78250 Y19.32313
G01 X91.76541 Y19.35925
G01 X91.76516 Y19.35980
G01 X91.70389 Y19.47004
G01 X91.68144 Y19.50819
G01 X91.65479 Y19.54352
G01 X91.57844 Y19.63974
G01 X91.57654 Y19.64213
G01 X91.54913 Y19.67235
G01 X91.48657 Y19.73494
G01 X91.45629 Y19.76237
G01 X91.35771 Y19.84060
G01 X91.32231 Y19.86732
G01 X91.28416 Y19.88975
G01 X91.26399 Y19.90098
G01 X91.17412 Y19.95091
G01 X91.13722 Y19.96836
G01 X91.05545 Y20.00225
G01 X91.01700 Y20.01599
G01 X90.89597 Y20.05056
G01 X90.85309 Y20.06166
G01 X90.80923 Y20.06780
G01 X90.68421 Y20.08218
G01 X90.64342 Y20.08419
G01 X90.59919 Y20.08528
G01 X90.29919 Y20.08528
G01 X90.25495 Y20.08419
G01 X90.21416 Y20.08218
G01 X90.08911 Y20.06780
G01 X90.04514 Y20.06163
G01 X90.00237 Y20.05056
G01 X89.98015 Y20.04421
G01 X89.88131 Y20.01599
G01 X89.84288 Y20.00225
G01 X89.76107 Y19.96834
G01 X89.72422 Y19.95091
G01 X89.61416 Y19.88975
G01 X89.57603 Y19.86730
G01 X89.54065 Y19.84060
G01 X89.44207 Y19.76237
G01 X89.41180 Y19.73494
G01 X89.34926 Y19.67240
G01 X89.32183 Y19.64213
G01 X89.24360 Y19.54355
G01 X89.21690 Y19.50817
G01 X89.19445 Y19.47004
G01 X89.13328 Y19.35998
G01 X89.11586 Y19.32313
G01 X89.08195 Y19.24131
G01 X89.06821 Y19.20288
G01 X89.03364 Y19.08183
G01 X89.02254 Y19.03898
G01 X89.01639 Y18.99509
G01 X89.00202 Y18.87004
G01 X89.00001 Y18.82925
G01 X89.00001 Y18.74078
G01 X89.00202 Y18.70004
G01 X89.01639 Y18.57497
G01 X89.02254 Y18.53110
G01 X89.03367 Y18.48823
G01 X89.06821 Y18.36715
G01 X89.08195 Y18.32874
G01 X89.11583 Y18.24700
G01 X89.13328 Y18.21007
G01 X89.16747 Y18.14858
G01 X89.19445 Y18.10004
G01 X89.22439 Y18.05008
G01 X89.24144 Y18.02470
G01 X89.27301 Y17.97441
G01 X89.30867 Y17.91327
G01 X89.32737 Y17.87967
G01 X89.34388 Y17.84861
G01 X89.34388 Y17.84858
G01 X89.34543 Y17.84571
G01 X89.34990 Y17.82981
G01 X89.35767 Y17.73700
G01 X89.34771 Y17.64442
G01 X89.33369 Y17.57596
G01 X89.31352 Y17.51312
G01 X89.31606 Y17.51620
G01 X89.32932 Y17.52501
G01 X89.37253 Y17.54815
G01 X89.46127 Y17.58488
G01 X89.50816 Y17.59910
G01 X89.60240 Y17.61787
G01 X89.64159 Y17.62176
G01 X89.65149 Y17.61980
G01 X89.69917 Y17.60906
G01 X89.75724 Y17.59453
G01 X89.84565 Y17.57688
G01 X90.01228 Y17.55219
G01 X90.09325 Y17.54419
G01 X90.25988 Y17.53603
G01 X90.29919 Y17.53502
G01 X90.59919 Y17.53502
G01 X90.63849 Y17.53603
G01 X90.80511 Y17.54419
G01 X90.88606 Y17.55219
G01 X91.05269 Y17.57688
G01 X91.14108 Y17.59450
G01 X91.19917 Y17.60906
G01 X91.24689 Y17.61980
G01 X91.25667 Y17.62176
G01 X91.29599 Y17.61787
G01 X91.39020 Y17.59910
G01 X91.43709 Y17.58488
G01 X91.52584 Y17.54815
G01 X91.56907 Y17.52501
G01 X91.58304 Y17.51571
G01 X91.58477 Y17.51373
G01 X91.58482 Y17.51366
G01 X91.61593 Y17.47843
G01 X91.63562 Y17.45536
G01 X91.66175 Y17.42379
G01 X91.66749 Y17.41693
G01 X91.72520 Y17.34856
G01 X91.73805 Y17.33367
G01 X91.75571 Y17.31015
G01 X91.80536 Y17.23677
G01 X91.81174 Y17.22626
G01 X91.82784 Y17.19323
G01 X91.86264 Y17.11183
G01 X91.86411 Y17.10789
G01 X91.87575 Y17.06461
G01 X91.89452 Y16.97810
G01 X91.89475 Y16.97673
G01 X91.89779 Y16.94040
G01 X91.89833 Y16.92923
G01 X91.89942 Y16.88501
G01 X91.89942 Y15.68503
G01 X91.89833 Y15.64081
G01 X91.89779 Y15.62979
G01 X91.89472 Y15.59326
G01 X91.89452 Y15.59194
G01 X91.87575 Y15.50540
G01 X91.86411 Y15.46217
G01 X91.86262 Y15.45816
G01 X91.82789 Y15.37693
G01 X91.81177 Y15.34381
G01 X91.80542 Y15.33337
G01 X91.75571 Y15.25989
G01 X91.73859 Y15.23710
G01 X91.72477 Y15.22184
G01 X91.66231 Y15.15941
G01 X91.64710 Y15.14561
G01 X91.62429 Y15.12849
G01 X91.55083 Y15.07879
G01 X91.54037 Y15.07244
G01 X91.50727 Y15.05633
G01 X91.42604 Y15.02159
G01 X91.42203 Y15.02009
G01 X91.37880 Y15.00848
G01 X91.29226 Y14.98971
G01 X91.29084 Y14.98945
G01 X91.27438 Y14.98808
G01 X91.25467 Y14.98646
G01 X91.24339 Y14.98587
G01 X91.19919 Y14.98478
G01 X89.69917 Y14.98478
G01 X89.65500 Y14.98587
G01 X89.64388 Y14.98646
G01 X89.61997 Y14.98844
G01 X89.60735 Y14.98948
G01 X89.60611 Y14.98971
G01 X89.51954 Y15.00848
G01 X89.47631 Y15.02009
G01 X89.47230 Y15.02159
G01 X89.39107 Y15.05633
G01 X89.35797 Y15.07244
G01 X89.34751 Y15.07879
G01 X89.27405 Y15.12849
G01 X89.25124 Y15.14561
G01 X89.23603 Y15.15941
G01 X89.17347 Y15.22197
G01 X89.15975 Y15.23710
G01 X89.14256 Y15.26004
G01 X89.09305 Y15.33319
G01 X89.08660 Y15.34384
G01 X89.07055 Y15.37675
G01 X89.03572 Y15.45816
G01 X89.03425 Y15.46215
G01 X89.02262 Y15.50540
G01 X89.00385 Y15.59194
G01 X89.00362 Y15.59334
G01 X89.00054 Y15.62971
G01 X89.00001 Y15.64081
G01 X88.99892 Y15.68503
G01 X88.99892 Y16.88501
G01 X89.00001 Y16.92923
G01 X89.00054 Y16.94033
G01 X89.00362 Y16.97673
G01 X89.00385 Y16.97810
G01 X89.02259 Y17.06461
G01 X89.03425 Y17.10792
G01 X89.03570 Y17.11183
G01 X89.07060 Y17.19341
G01 X89.08660 Y17.22626
G01 X89.09310 Y17.23697
G01 X89.14256 Y17.31002
G01 X89.16021 Y17.33357
G01 X89.17304 Y17.34843
G01 X89.19600 Y17.37563
G01 X89.22038 Y17.40337
G01 X89.23179 Y17.41582
G01 X89.26437 Y17.45333
G01 X89.31352 Y17.51312
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.64159 Y17.62176 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.64159 Y17.62176
G01 X89.59597 Y17.64612
G01 X89.51609 Y17.69948
G01 X89.38728 Y17.80520
G01 X89.34388 Y17.84858
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.72639 Y25.28273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.72639 Y25.28273
G01 X83.70419 Y25.29586
G01 X83.65842 Y25.34587
G01 X83.60962 Y25.42527
G01 X83.57675 Y25.51247
G01 X83.55844 Y25.57991
G01 X83.54269 Y25.67173
G01 X83.54460 Y25.76487
G01 X83.56411 Y25.85598
G01 X83.58516 Y25.92261
G01 X83.62961 Y26.02268
G01 X83.63893 Y26.03513
G01 X83.64020 Y26.03624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.82182 Y25.96939 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.82182 Y25.96939
G01 X82.84645 Y25.94534
G01 X82.89959 Y25.86883
G01 X82.93728 Y25.78367
G01 X82.95936 Y25.71737
G01 X82.98026 Y25.62657
G01 X82.98359 Y25.53348
G01 X82.96924 Y25.44143
G01 X82.95197 Y25.37374
G01 X82.92502 Y25.29604
G01 X82.89134 Y25.23467
G01 X82.88798 Y25.23178
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.73297 Y22.94832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.73297 Y22.94832
G01 X82.74351 Y22.93671
G01 X82.85656 Y22.87626
G01 X82.94531 Y22.83950
G01 X83.09537 Y22.79399
G01 X83.18958 Y22.77524
G01 X83.34567 Y22.75987
G01 X83.44170 Y22.75987
G01 X83.59779 Y22.77524
G01 X83.59824 Y22.77534
G01 X83.69199 Y22.79399
G01 X83.84208 Y22.83950
G01 X83.93081 Y22.87626
G01 X84.04226 Y22.93582
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.24952 Y22.16452 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.24952 Y22.16452
G01 X84.24432 Y22.16770
G01 X84.16969 Y22.22353
G01 X84.10698 Y22.29249
G01 X84.05847 Y22.37209
G01 X84.02793 Y22.43496
G01 X83.99542 Y22.52218
G01 X83.97995 Y22.61400
G01 X83.98216 Y22.70709
G01 X83.99044 Y22.77646
G01 X84.00660 Y22.85563
G01 X84.03365 Y22.92609
G01 X84.06377 Y22.96013
G01 X84.09349 Y22.98870
G01 X84.13009 Y23.02591
G01 X84.13037 Y23.02622
G01 X84.19865 Y23.09241
G01 X84.24544 Y23.13325
G01 X84.30924 Y23.19470
G01 X84.31089 Y23.19647
G01 X84.40802 Y23.31651
G01 X84.42809 Y23.34227
G01 X84.45681 Y23.39038
G01 X84.52044 Y23.50488
G01 X84.53129 Y23.52840
G01 X84.56438 Y23.61047
G01 X84.58821 Y23.67907
G01 X84.60985 Y23.76058
G01 X84.62831 Y23.84707
G01 X84.63060 Y23.86109
G01 X84.64292 Y24.00320
G01 X84.64305 Y24.00475
G01 X84.64569 Y24.04753
G01 X84.64292 Y24.09182
G01 X84.63060 Y24.23404
G01 X84.62831 Y24.24798
G01 X84.60985 Y24.33450
G01 X84.58821 Y24.41598
G01 X84.56438 Y24.48458
G01 X84.53131 Y24.56660
G01 X84.52044 Y24.59015
G01 X84.45684 Y24.70465
G01 X84.42809 Y24.75278
G01 X84.40802 Y24.77854
G01 X84.31089 Y24.89860
G01 X84.30924 Y24.90036
G01 X84.24538 Y24.96185
G01 X84.17312 Y25.02492
G01 X84.12430 Y25.06147
G01 X84.05105 Y25.11092
G01 X84.01887 Y25.13040
G01 X83.91249 Y25.18443
G01 X83.90581 Y25.18778
G01 X83.83253 Y25.22423
G01 X83.78872 Y25.24750
G01 X83.72639 Y25.28273
G01 X83.69903 Y25.29891
G01 X83.69199 Y25.30104
G01 X83.59779 Y25.31979
G01 X83.44170 Y25.33515
G01 X83.34567 Y25.33515
G01 X83.18958 Y25.31979
G01 X83.09537 Y25.30104
G01 X82.94531 Y25.25553
G01 X82.88798 Y25.23178
G01 X82.88796 Y25.23178
G01 X82.86169 Y25.20914
G01 X82.81869 Y25.17417
G01 X82.77546 Y25.14102
G01 X82.73566 Y25.11219
G01 X82.69400 Y25.08364
G01 X82.66304 Y25.06147
G01 X82.61422 Y25.02492
G01 X82.54196 Y24.96185
G01 X82.47808 Y24.90031
G01 X82.47645 Y24.89858
G01 X82.37930 Y24.77849
G01 X82.35928 Y24.75278
G01 X82.33055 Y24.70470
G01 X82.26690 Y24.59015
G01 X82.25606 Y24.56668
G01 X82.22296 Y24.48458
G01 X82.19913 Y24.41598
G01 X82.17749 Y24.33450
G01 X82.15903 Y24.24791
G01 X82.15674 Y24.23396
G01 X82.14442 Y24.09175
G01 X82.14168 Y24.04753
G01 X82.14442 Y24.00328
G01 X82.15674 Y23.86109
G01 X82.15903 Y23.84715
G01 X82.17749 Y23.76058
G01 X82.19911 Y23.67915
G01 X82.22296 Y23.61047
G01 X82.25608 Y23.52833
G01 X82.26690 Y23.50488
G01 X82.33058 Y23.39033
G01 X82.35928 Y23.34227
G01 X82.37930 Y23.31657
G01 X82.47645 Y23.19647
G01 X82.47808 Y23.19475
G01 X82.54191 Y23.13325
G01 X82.58867 Y23.09244
G01 X82.65697 Y23.02624
G01 X82.68201 Y22.99932
G01 X82.72260 Y22.95822
G01 X82.73297 Y22.94832
G01 X82.74516 Y22.93488
G01 X82.77729 Y22.86688
G01 X82.80045 Y22.77676
G01 X82.80617 Y22.68385
G01 X82.80381 Y22.61403
G01 X82.79182 Y22.52162
G01 X82.76253 Y22.43313
G01 X82.71704 Y22.35180
G01 X82.67729 Y22.29434
G01 X82.62603 Y22.23196
G01 X82.56525 Y22.17885
G01 X82.56368 Y22.17788
G01 X82.48981 Y22.14966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.00744 Y21.89747 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.00744 Y21.89747
G01 X81.98849 Y21.86203
G01 X81.96060 Y21.77011
G01 X81.95118 Y21.67451
G01 X81.95118 Y21.65129
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.73538 Y21.85858 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.73538 Y21.85858
G01 X81.83805 Y21.77430
G01 X81.90597 Y21.70638
G01 X81.95118 Y21.65129
G01 X81.99251 Y21.53585
G01 X82.01846 Y21.45045
G01 X82.06523 Y21.26374
G01 X82.07965 Y21.19147
G01 X82.10734 Y21.00476
G01 X82.11374 Y20.93996
G01 X82.12291 Y20.75322
G01 X82.12370 Y20.72203
G01 X82.12370 Y20.62704
G01 X82.12291 Y20.59582
G01 X82.11374 Y20.40908
G01 X82.10734 Y20.34428
G01 X82.07965 Y20.15757
G01 X82.06523 Y20.08530
G01 X82.01846 Y19.89859
G01 X81.99248 Y19.81314
G01 X81.95115 Y19.69770
G01 X81.90597 Y19.64263
G01 X81.83805 Y19.57471
G01 X81.73124 Y19.48706
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.00739 Y19.45157 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.00739 Y19.45157
G01 X81.98849 Y19.48701
G01 X81.96060 Y19.57893
G01 X81.95118 Y19.67451
G01 X81.95115 Y19.69770
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.87255 Y21.77044 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.87255 Y21.77044
G01 X79.85908 Y21.76374
G01 X79.83856 Y21.75833
G01 X79.74872 Y21.75170
G01 X79.65916 Y21.76165
G01 X79.59071 Y21.77573
G01 X79.50453 Y21.80191
G01 X79.42459 Y21.84339
G01 X79.40727 Y21.85452
G01 X79.37374 Y21.87809
G01 X79.25367 Y21.97024
G01 X79.25367 Y21.81073
G01 X79.29805 Y21.77430
G01 X79.36597 Y21.70638
G01 X79.48443 Y21.56204
G01 X79.53780 Y21.48218
G01 X79.58367 Y21.39630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.02904 Y21.61454 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.02904 Y21.61454
G01 X77.18601 Y21.61454
G01 X77.26140 Y21.70638
G01 X77.32932 Y21.77430
G01 X77.37367 Y21.81070
G01 X77.37367 Y21.97021
G01 X77.28124 Y21.89930
G01 X77.13641 Y21.75444
G01 X77.02904 Y21.61454
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.58367 Y19.95267 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.58367 Y19.95267
G01 X79.53780 Y19.86684
G01 X79.48443 Y19.78698
G01 X79.36597 Y19.64263
G01 X79.29805 Y19.57471
G01 X79.25367 Y19.53829
G01 X79.25367 Y19.37880
G01 X79.37374 Y19.47095
G01 X79.49531 Y19.53923
G01 X79.56046 Y19.56443
G01 X79.65017 Y19.58962
G01 X79.74303 Y19.59737
G01 X79.83569 Y19.58741
G01 X79.86084 Y19.58226
G01 X79.87120 Y19.57708
G01 X79.90173 Y19.56252
G01 X80.03655 Y19.48419
G01 X80.05042 Y19.47449
G01 X80.05568 Y19.47083
G01 X80.11174 Y19.43697
G01 X80.23345 Y19.36930
G01 X80.27643 Y19.34898
G01 X80.31669 Y19.33113
G01 X80.35814 Y19.31513
G01 X80.40287 Y19.29912
G01 X80.53683 Y19.26090
G01 X80.57973 Y19.24977
G01 X80.62360 Y19.24362
G01 X80.76200 Y19.22770
G01 X80.80942 Y19.22536
G01 X80.89794 Y19.22536
G01 X80.94534 Y19.22770
G01 X81.08377 Y19.24362
G01 X81.12761 Y19.24977
G01 X81.17051 Y19.26090
G01 X81.30450 Y19.29915
G01 X81.34920 Y19.31513
G01 X81.43094 Y19.34898
G01 X81.47389 Y19.36930
G01 X81.50048 Y19.38409
G01 X81.59870 Y19.43120
G01 X81.61829 Y19.43918
G01 X81.68306 Y19.46852
G01 X81.68349 Y19.46872
G01 X81.73124 Y19.48706
G01 X81.75085 Y19.49458
G01 X81.77163 Y19.49757
G01 X81.86472 Y19.49315
G01 X81.95529 Y19.47118
G01 X82.00465 Y19.45409
G01 X82.00739 Y19.45157
G01 X82.00742 Y19.45157
G01 X82.01900 Y19.44108
G01 X82.13358 Y19.34467
G01 X82.13947 Y19.33974
G01 X82.15065 Y19.33049
G01 X82.17429 Y19.31160
G01 X82.19527 Y19.29587
G01 X82.23591 Y19.27377
G01 X82.27937 Y19.25302
G01 X82.37640 Y19.22737
G01 X82.39591 Y19.22541
G01 X82.44117 Y19.22427
G01 X84.34620 Y19.22427
G01 X84.39143 Y19.22541
G01 X84.41094 Y19.22737
G01 X84.50794 Y19.25302
G01 X84.59215 Y19.29592
G01 X84.66545 Y19.35528
G01 X84.72483 Y19.42864
G01 X84.76768 Y19.51271
G01 X84.79331 Y19.60969
G01 X84.79529 Y19.62920
G01 X84.79641 Y19.67451
G01 X84.79641 Y21.67451
G01 X84.79529 Y21.71985
G01 X84.79331 Y21.73938
G01 X84.76768 Y21.83633
G01 X84.73784 Y21.89711
G01 X84.72483 Y21.92040
G01 X84.72202 Y21.92426
G01 X84.66545 Y21.99376
G01 X84.61313 Y22.03742
G01 X84.59207 Y22.05317
G01 X84.50896 Y22.09559
G01 X84.50789 Y22.09604
G01 X84.44231 Y22.11464
G01 X84.34620 Y22.13801
G01 X84.31330 Y22.14662
G01 X84.24952 Y22.16452
G01 X82.52867 Y22.16452
G01 X82.48981 Y22.14966
G01 X82.44117 Y22.13801
G01 X82.34503 Y22.11464
G01 X82.27937 Y22.09602
G01 X82.19527 Y22.05317
G01 X82.15052 Y22.01845
G01 X82.04836 Y21.93394
G01 X82.00744 Y21.89747
G01 X82.00437 Y21.89475
G01 X81.99129 Y21.88929
G01 X81.90226 Y21.86176
G01 X81.80965 Y21.85157
G01 X81.73876 Y21.85734
G01 X81.73538 Y21.85858
G01 X81.71786 Y21.86508
G01 X81.68379 Y21.88078
G01 X81.65215 Y21.89467
G01 X81.59837 Y21.91715
G01 X81.51872 Y21.95507
G01 X81.51199 Y21.95868
G01 X81.50048 Y21.96498
G01 X81.47399 Y21.97971
G01 X81.43096 Y22.00006
G01 X81.34920 Y22.03394
G01 X81.30442 Y22.04994
G01 X81.17051 Y22.08820
G01 X81.12764 Y22.09930
G01 X81.08369 Y22.10544
G01 X80.94539 Y22.12134
G01 X80.89789 Y22.12368
G01 X80.80948 Y22.12368
G01 X80.76195 Y22.12134
G01 X80.62365 Y22.10544
G01 X80.57971 Y22.09930
G01 X80.53683 Y22.08820
G01 X80.40290 Y22.04994
G01 X80.35814 Y22.03394
G01 X80.27638 Y22.00006
G01 X80.23343 Y21.97974
G01 X80.11169 Y21.91207
G01 X80.05827 Y21.87992
G01 X80.03638 Y21.86516
G01 X79.95507 Y21.81619
G01 X79.92838 Y21.80062
G01 X79.87255 Y21.77044
G01 X79.85840 Y21.76338
G01 X79.80140 Y21.70638
G01 X79.68293 Y21.56204
G01 X79.62957 Y21.48218
G01 X79.58367 Y21.39630
G01 X79.58367 Y20.75330
G01 X79.58370 Y20.72203
G01 X79.58370 Y20.62704
G01 X79.58367 Y20.59574
G01 X79.58367 Y19.95267
G01 X79.62957 Y19.86684
G01 X79.68293 Y19.78698
G01 X79.80140 Y19.64263
G01 X79.86272 Y19.58132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.27805 Y13.75324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.27805 Y13.75324
G01 X81.27450 Y13.74653
G01 X81.24661 Y13.65461
G01 X81.23719 Y13.55900
G01 X81.23716 Y13.29797
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.23716 Y12.12004 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.23716 Y12.12004
G01 X81.17607 Y12.00579
G01 X81.12271 Y11.92594
G01 X81.01699 Y11.79711
G01 X80.94907 Y11.72919
G01 X80.93437 Y11.71712
G01 X80.93267 Y11.71628
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.08932 Y7.45221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.08932 Y7.45221
G01 X77.10702 Y7.43062
G01 X77.16038 Y7.35076
G01 X77.28977 Y7.10872
G01 X77.31418 Y7.04969
G01 X77.31418 Y4.93415
G01 X77.28977 Y4.87523
G01 X77.16038 Y4.63319
G01 X77.10702 Y4.55333
G01 X77.08853 Y4.53080
G01 X77.08528 Y4.52829
G01 X77.13862 Y4.55112
G01 X77.22960 Y4.57091
G01 X77.32272 Y4.57314
G01 X77.39241 Y4.56816
G01 X77.47298 Y4.55559
G01 X77.53493 Y4.53499
G01 X77.61162 Y4.47482
G01 X77.65147 Y4.43934
G01 X77.72122 Y4.37027
G01 X77.72531 Y4.36573
G01 X77.78789 Y4.30317
G01 X77.84481 Y4.25155
G01 X77.99970 Y4.12862
G01 X78.03514 Y4.10190
G01 X78.07334 Y4.07942
G01 X78.24621 Y3.98336
G01 X78.31563 Y3.95051
G01 X78.39742 Y3.91663
G01 X78.40305 Y3.91462
G01 X78.46970 Y3.89077
G01 X78.65990 Y3.83647
G01 X78.70282 Y3.82534
G01 X78.74677 Y3.81920
G01 X78.94324 Y3.79659
G01 X79.01994 Y3.79283
G01 X79.10841 Y3.79283
G01 X79.18512 Y3.79659
G01 X79.38159 Y3.81920
G01 X79.42551 Y3.82534
G01 X79.46846 Y3.83647
G01 X79.65863 Y3.89077
G01 X79.73094 Y3.91666
G01 X79.81270 Y3.95051
G01 X79.88212 Y3.98336
G01 X80.05502 Y4.07942
G01 X80.09322 Y4.10190
G01 X80.12865 Y4.12864
G01 X80.28354 Y4.25158
G01 X80.34046 Y4.30317
G01 X80.40300 Y4.36570
G01 X80.40714 Y4.37027
G01 X80.50244 Y4.46128
G01 X80.55725 Y4.50667
G01 X80.58524 Y4.52826
G01 X80.58527 Y4.52826
G01 X80.63864 Y4.55112
G01 X80.72962 Y4.57091
G01 X80.82273 Y4.57314
G01 X80.89243 Y4.56816
G01 X80.97305 Y4.55559
G01 X81.03495 Y4.53499
G01 X81.03899 Y4.53179
G01 X81.03904 Y4.53177
G01 X81.11171 Y4.47474
G01 X81.15156 Y4.43926
G01 X81.22121 Y4.37027
G01 X81.22535 Y4.36570
G01 X81.28788 Y4.30317
G01 X81.29891 Y4.29318
G01 X81.34481 Y4.25158
G01 X81.49970 Y4.12864
G01 X81.53515 Y4.10190
G01 X81.57333 Y4.07942
G01 X81.74623 Y3.98333
G01 X81.81562 Y3.95051
G01 X81.89741 Y3.91663
G01 X81.90305 Y3.91462
G01 X81.96970 Y3.89080
G01 X82.15989 Y3.83647
G01 X82.20284 Y3.82534
G01 X82.24676 Y3.81920
G01 X82.44323 Y3.79659
G01 X82.51994 Y3.79283
G01 X82.60841 Y3.79283
G01 X82.68511 Y3.79659
G01 X82.88158 Y3.81920
G01 X82.92552 Y3.82534
G01 X82.96845 Y3.83647
G01 X83.15865 Y3.89077
G01 X83.23093 Y3.91663
G01 X83.31272 Y3.95051
G01 X83.38214 Y3.98336
G01 X83.55501 Y4.07942
G01 X83.59321 Y4.10190
G01 X83.62865 Y4.12862
G01 X83.78354 Y4.25155
G01 X83.84046 Y4.30317
G01 X83.90304 Y4.36573
G01 X83.90713 Y4.37027
G01 X84.00243 Y4.46128
G01 X84.05725 Y4.50667
G01 X84.08524 Y4.52826
G01 X84.08854 Y4.53080
G01 X84.10703 Y4.55333
G01 X84.16040 Y4.63319
G01 X84.28976 Y4.87523
G01 X84.31417 Y4.93418
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.61160 Y4.47482 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.61160 Y4.47482
G01 X84.53492 Y4.53499
G01 X84.47299 Y4.55559
G01 X84.39243 Y4.56816
G01 X84.32273 Y4.57314
G01 X84.22961 Y4.57091
G01 X84.13863 Y4.55112
G01 X84.08524 Y4.52826
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.03899 Y4.53179 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.03899 Y4.53179
G01 X81.02136 Y4.55333
G01 X80.96800 Y4.63319
G01 X80.83861 Y4.87523
G01 X80.81417 Y4.93418
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.58527 Y4.52826 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.58527 Y4.52826
G01 X80.58852 Y4.53078
G01 X80.60701 Y4.55333
G01 X80.66038 Y4.63319
G01 X80.78977 Y4.87523
G01 X80.81417 Y4.93418
G01 X80.81417 Y7.04972
G01 X80.78977 Y7.10872
G01 X80.66038 Y7.35076
G01 X80.60701 Y7.43062
G01 X80.58933 Y7.45218
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.81417 Y7.04972 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.81417 Y7.04972
G01 X80.83861 Y7.10872
G01 X80.96800 Y7.35076
G01 X81.02136 Y7.43062
G01 X81.03996 Y7.45327
G01 X81.04310 Y7.45571
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.31417 Y7.04972 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.31417 Y7.04972
G01 X84.33860 Y7.10872
G01 X84.46799 Y7.35076
G01 X84.52136 Y7.43062
G01 X84.53995 Y7.45330
G01 X84.54305 Y7.45569
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.08930 Y7.45221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.08930 Y7.45221
G01 X84.10703 Y7.43062
G01 X84.16040 Y7.35076
G01 X84.28976 Y7.10872
G01 X84.31417 Y7.04972
G01 X84.31417 Y4.93418
G01 X84.33860 Y4.87523
G01 X84.46799 Y4.63319
G01 X84.52136 Y4.55333
G01 X84.53906 Y4.53177
G01 X84.61160 Y4.47482
G01 X84.65148 Y4.43934
G01 X84.72128 Y4.37020
G01 X84.72534 Y4.36570
G01 X84.78788 Y4.30317
G01 X84.79893 Y4.29316
G01 X84.84480 Y4.25158
G01 X84.99969 Y4.12864
G01 X85.03515 Y4.10190
G01 X85.07335 Y4.07942
G01 X85.24622 Y3.98336
G01 X85.31566 Y3.95051
G01 X85.39743 Y3.91663
G01 X85.40307 Y3.91462
G01 X85.46972 Y3.89077
G01 X85.65989 Y3.83647
G01 X85.70284 Y3.82534
G01 X85.74675 Y3.81920
G01 X85.94322 Y3.79659
G01 X86.01993 Y3.79283
G01 X86.10840 Y3.79283
G01 X86.18511 Y3.79659
G01 X86.38158 Y3.81920
G01 X86.42552 Y3.82534
G01 X86.46844 Y3.83647
G01 X86.65864 Y3.89077
G01 X86.73093 Y3.91663
G01 X86.81271 Y3.95051
G01 X86.88213 Y3.98336
G01 X87.05501 Y4.07942
G01 X87.09321 Y4.10190
G01 X87.12861 Y4.12862
G01 X87.20946 Y4.19280
G01 X87.28355 Y4.25158
G01 X87.34045 Y4.30317
G01 X87.40304 Y4.36573
G01 X87.45457 Y4.42262
G01 X87.57753 Y4.57754
G01 X87.60426 Y4.61295
G01 X87.62673 Y4.65115
G01 X87.72282 Y4.82404
G01 X87.75564 Y4.89344
G01 X87.78952 Y4.97523
G01 X87.81538 Y5.04754
G01 X87.86968 Y5.23771
G01 X87.88081 Y5.28064
G01 X87.88696 Y5.32453
G01 X87.90956 Y5.52102
G01 X87.91335 Y5.59770
G01 X87.91444 Y5.64198
G01 X87.91444 Y6.34197
G01 X87.91335 Y6.38627
G01 X87.90956 Y6.46295
G01 X87.88696 Y6.65945
G01 X87.88081 Y6.70334
G01 X87.86968 Y6.74627
G01 X87.81538 Y6.93644
G01 X87.78952 Y7.00875
G01 X87.75564 Y7.09054
G01 X87.72280 Y7.15993
G01 X87.62986 Y7.32719
G01 X87.62673 Y7.33283
G01 X87.60426 Y7.37100
G01 X87.57753 Y7.40644
G01 X87.45457 Y7.56135
G01 X87.40304 Y7.61825
G01 X87.34045 Y7.68081
G01 X87.28353 Y7.73242
G01 X87.12864 Y7.85536
G01 X87.09321 Y7.88208
G01 X87.05501 Y7.90456
G01 X86.88213 Y8.00062
G01 X86.81271 Y8.03346
G01 X86.73093 Y8.06735
G01 X86.65864 Y8.09320
G01 X86.46844 Y8.14751
G01 X86.42552 Y8.15863
G01 X86.38158 Y8.16478
G01 X86.18513 Y8.18739
G01 X86.10840 Y8.19114
G01 X86.01993 Y8.19114
G01 X85.94322 Y8.18739
G01 X85.74675 Y8.16478
G01 X85.70284 Y8.15863
G01 X85.65989 Y8.14751
G01 X85.46972 Y8.09320
G01 X85.39743 Y8.06732
G01 X85.31566 Y8.03346
G01 X85.24622 Y8.00062
G01 X85.07335 Y7.90456
G01 X85.03515 Y7.88208
G01 X84.99969 Y7.85533
G01 X84.84482 Y7.73242
G01 X84.78788 Y7.68081
G01 X84.72534 Y7.61827
G01 X84.72123 Y7.61370
G01 X84.62585 Y7.52264
G01 X84.57101 Y7.47723
G01 X84.54310 Y7.45571
G01 X84.54305 Y7.45569
G01 X84.48966 Y7.43283
G01 X84.39867 Y7.41307
G01 X84.30561 Y7.41083
G01 X84.23594 Y7.41581
G01 X84.15534 Y7.42838
G01 X84.09342 Y7.44898
G01 X84.01673 Y7.50915
G01 X83.97688 Y7.54464
G01 X83.90713 Y7.61370
G01 X83.90304 Y7.61825
G01 X83.84046 Y7.68081
G01 X83.78354 Y7.73242
G01 X83.62865 Y7.85536
G01 X83.59324 Y7.88205
G01 X83.55501 Y7.90456
G01 X83.38211 Y8.00062
G01 X83.31272 Y8.03346
G01 X83.23093 Y8.06735
G01 X83.15865 Y8.09320
G01 X82.96845 Y8.14751
G01 X82.92550 Y8.15863
G01 X82.88158 Y8.16478
G01 X82.68511 Y8.18739
G01 X82.60841 Y8.19114
G01 X82.51994 Y8.19114
G01 X82.44320 Y8.18739
G01 X82.24676 Y8.16478
G01 X82.20284 Y8.15863
G01 X82.15989 Y8.14751
G01 X81.96972 Y8.09320
G01 X81.89741 Y8.06732
G01 X81.81565 Y8.03346
G01 X81.74623 Y8.00062
G01 X81.57333 Y7.90456
G01 X81.53513 Y7.88208
G01 X81.49970 Y7.85533
G01 X81.34481 Y7.73242
G01 X81.28788 Y7.68081
G01 X81.22535 Y7.61827
G01 X81.22126 Y7.61375
G01 X81.12586 Y7.52264
G01 X81.07102 Y7.47723
G01 X81.04310 Y7.45571
G01 X80.98966 Y7.43283
G01 X80.89871 Y7.41307
G01 X80.80561 Y7.41083
G01 X80.73592 Y7.41581
G01 X80.65535 Y7.42838
G01 X80.59342 Y7.44898
G01 X80.58933 Y7.45218
G01 X80.51674 Y7.50915
G01 X80.47686 Y7.54464
G01 X80.40711 Y7.61370
G01 X80.40300 Y7.61827
G01 X80.34046 Y7.68081
G01 X80.28352 Y7.73242
G01 X80.12865 Y7.85533
G01 X80.09320 Y7.88208
G01 X80.05502 Y7.90456
G01 X79.88212 Y8.00062
G01 X79.81270 Y8.03346
G01 X79.73094 Y8.06732
G01 X79.65863 Y8.09320
G01 X79.46846 Y8.14751
G01 X79.42551 Y8.15863
G01 X79.38159 Y8.16478
G01 X79.18512 Y8.18739
G01 X79.10841 Y8.19114
G01 X79.01994 Y8.19114
G01 X78.94321 Y8.18739
G01 X78.74677 Y8.16478
G01 X78.70285 Y8.15863
G01 X78.65990 Y8.14751
G01 X78.46970 Y8.09320
G01 X78.39742 Y8.06735
G01 X78.31563 Y8.03346
G01 X78.24621 Y8.00062
G01 X78.07334 Y7.90456
G01 X78.03514 Y7.88208
G01 X77.99970 Y7.85536
G01 X77.84481 Y7.73242
G01 X77.78789 Y7.68081
G01 X77.72531 Y7.61825
G01 X77.72122 Y7.61370
G01 X77.62592 Y7.52269
G01 X77.57110 Y7.47730
G01 X77.54311 Y7.45571
G01 X77.54306 Y7.45569
G01 X77.48972 Y7.43285
G01 X77.39874 Y7.41307
G01 X77.30562 Y7.41083
G01 X77.23592 Y7.41581
G01 X77.15536 Y7.42838
G01 X77.09343 Y7.44898
G01 X77.01675 Y7.50915
G01 X76.97687 Y7.54464
G01 X76.90712 Y7.61370
G01 X76.90301 Y7.61827
G01 X76.84047 Y7.68081
G01 X76.78352 Y7.73242
G01 X76.62866 Y7.85533
G01 X76.59320 Y7.88208
G01 X76.55500 Y7.90456
G01 X76.38213 Y8.00062
G01 X76.31269 Y8.03346
G01 X76.23092 Y8.06732
G01 X76.15863 Y8.09320
G01 X75.96846 Y8.14751
G01 X75.92551 Y8.15863
G01 X75.88160 Y8.16478
G01 X75.68513 Y8.18739
G01 X75.60842 Y8.19114
G01 X75.51995 Y8.19114
G01 X75.44322 Y8.18739
G01 X75.24677 Y8.16478
G01 X75.20283 Y8.15863
G01 X75.15991 Y8.14751
G01 X74.96971 Y8.09320
G01 X74.89742 Y8.06735
G01 X74.81563 Y8.03346
G01 X74.74622 Y8.00062
G01 X74.57334 Y7.90456
G01 X74.53514 Y7.88208
G01 X74.49971 Y7.85536
G01 X74.34482 Y7.73242
G01 X74.28790 Y7.68081
G01 X74.22531 Y7.61825
G01 X74.17378 Y7.56135
G01 X74.05082 Y7.40644
G01 X74.02409 Y7.37103
G01 X74.00162 Y7.33283
G01 X73.90553 Y7.15993
G01 X73.87271 Y7.09054
G01 X73.83883 Y7.00875
G01 X73.81297 Y6.93644
G01 X73.75866 Y6.74627
G01 X73.74754 Y6.70334
G01 X73.74139 Y6.65945
G01 X73.71879 Y6.46295
G01 X73.71500 Y6.38627
G01 X73.71393 Y6.34197
G01 X73.71393 Y5.64198
G01 X73.71500 Y5.59770
G01 X73.71879 Y5.52102
G01 X73.74139 Y5.32453
G01 X73.74754 Y5.28064
G01 X73.75866 Y5.23771
G01 X73.81297 Y5.04754
G01 X73.83883 Y4.97523
G01 X73.87271 Y4.89344
G01 X73.90553 Y4.82404
G01 X74.00162 Y4.65115
G01 X74.02409 Y4.61295
G01 X74.05082 Y4.57754
G01 X74.17378 Y4.42262
G01 X74.22531 Y4.36573
G01 X74.28790 Y4.30317
G01 X74.34482 Y4.25155
G01 X74.49971 Y4.12862
G01 X74.53514 Y4.10190
G01 X74.57334 Y4.07942
G01 X74.74622 Y3.98336
G01 X74.81563 Y3.95051
G01 X74.89742 Y3.91663
G01 X74.90306 Y3.91462
G01 X74.96971 Y3.89077
G01 X75.15991 Y3.83647
G01 X75.20283 Y3.82534
G01 X75.24677 Y3.81920
G01 X75.44322 Y3.79659
G01 X75.51995 Y3.79283
G01 X75.60842 Y3.79283
G01 X75.68513 Y3.79659
G01 X75.88160 Y3.81920
G01 X75.92551 Y3.82534
G01 X75.96846 Y3.83647
G01 X76.15863 Y3.89077
G01 X76.23092 Y3.91666
G01 X76.31269 Y3.95051
G01 X76.38213 Y3.98336
G01 X76.55500 Y4.07942
G01 X76.59320 Y4.10190
G01 X76.62866 Y4.12864
G01 X76.78352 Y4.25155
G01 X76.84047 Y4.30317
G01 X76.90301 Y4.36570
G01 X76.90712 Y4.37027
G01 X77.00242 Y4.46128
G01 X77.05724 Y4.50667
G01 X77.08528 Y4.52829
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.61162 Y4.47482 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.61162 Y4.47482
G01 X77.53905 Y4.53177
G01 X77.52134 Y4.55333
G01 X77.46798 Y4.63319
G01 X77.33862 Y4.87523
G01 X77.31418 Y4.93415
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.31418 Y7.04969 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.31418 Y7.04969
G01 X77.33862 Y7.10872
G01 X77.46798 Y7.35076
G01 X77.52134 Y7.43062
G01 X77.53994 Y7.45327
G01 X77.54306 Y7.45569
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.27732 Y11.66777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.27732 Y11.66777
G01 X81.21141 Y11.69159
G01 X81.14384 Y11.70945
G01 X81.05189 Y11.72459
G01 X80.95873 Y11.72205
G01 X80.93267 Y11.71628
G01 X80.93264 Y11.71628
G01 X80.87262 Y11.68690
G01 X80.81021 Y11.65278
G01 X80.80061 Y11.64748
G01 X80.72248 Y11.60358
G01 X80.69685 Y11.58862
G01 X80.68735 Y11.58286
G01 X80.57506 Y11.52586
G01 X80.51280 Y11.49718
G01 X80.49375 Y11.49111
G01 X80.33442 Y11.44237
G01 X80.32677 Y11.44006
G01 X80.24722 Y11.42652
G01 X80.13434 Y11.41245
G01 X80.08141 Y11.40986
G01 X79.99294 Y11.40986
G01 X79.94001 Y11.41245
G01 X79.82713 Y11.42652
G01 X79.74755 Y11.44006
G01 X79.73993 Y11.44237
G01 X79.58060 Y11.49111
G01 X79.56155 Y11.49718
G01 X79.49929 Y11.52586
G01 X79.48090 Y11.53518
G01 X79.38700 Y11.58286
G01 X79.35210 Y11.60399
G01 X79.27872 Y11.65355
G01 X79.22657 Y11.69259
G01 X79.15848 Y11.75202
G01 X79.14999 Y11.75934
G01 X79.09752 Y11.80402
G01 X79.08210 Y11.81743
G01 X79.06442 Y11.83315
G01 X78.96673 Y11.90757
G01 X78.96671 Y11.90757
G01 X78.96340 Y11.91011
G01 X78.86808 Y11.93188
G01 X78.79861 Y11.93947
G01 X78.70547 Y11.94074
G01 X78.61375 Y11.92436
G01 X78.56447 Y11.90541
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.96671 Y11.90757 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.96671 Y11.90757
G01 X78.95167 Y11.92594
G01 X78.89830 Y12.00579
G01 X78.81974 Y12.15276
G01 X78.78299 Y12.24148
G01 X78.76719 Y12.29355
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.76719 Y13.12441 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.76719 Y13.12441
G01 X78.78299 Y13.17653
G01 X78.81974 Y13.26528
G01 X78.89830 Y13.41224
G01 X78.95167 Y13.49210
G01 X78.96643 Y13.51008
G01 X78.96988 Y13.51265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.46986 Y13.58494 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.46986 Y13.58494
G01 X78.45223 Y13.60063
G01 X78.43676 Y13.61412
G01 X78.38436 Y13.65870
G01 X78.37583 Y13.66606
G01 X78.30780 Y13.72545
G01 X78.28461 Y13.74282
G01 X78.25563 Y13.76451
G01 X78.18225 Y13.81404
G01 X78.14735 Y13.83520
G01 X78.03506 Y13.89220
G01 X77.97278 Y13.92090
G01 X77.95368 Y13.92697
G01 X77.79437 Y13.97572
G01 X77.78682 Y13.97798
G01 X77.70722 Y13.99154
G01 X77.69571 Y13.99296
G01 X77.59434 Y14.00559
G01 X77.54141 Y14.00818
G01 X77.45294 Y14.00818
G01 X77.40001 Y14.00559
G01 X77.28713 Y13.99151
G01 X77.27141 Y13.98943
G01 X77.20748 Y13.97798
G01 X77.19998 Y13.97572
G01 X77.04067 Y13.92697
G01 X77.02160 Y13.92090
G01 X76.95929 Y13.89220
G01 X76.84697 Y13.83518
G01 X76.81210 Y13.81404
G01 X76.73872 Y13.76451
G01 X76.68657 Y13.72547
G01 X76.61004 Y13.65867
G01 X76.54626 Y13.59723
G01 X76.54332 Y13.59408
G01 X76.44121 Y13.46789
G01 X76.42140 Y13.44247
G01 X76.39242 Y13.39395
G01 X76.32539 Y13.27335
G01 X76.31335 Y13.24727
G01 X76.28027 Y13.16528
G01 X76.25490 Y13.09220
G01 X76.23196 Y13.00579
G01 X76.21347 Y12.91918
G01 X76.21081 Y12.90290
G01 X76.19785 Y12.75329
G01 X76.19508 Y12.70902
G01 X76.19785 Y12.66477
G01 X76.21081 Y12.51527
G01 X76.21347 Y12.49888
G01 X76.23196 Y12.41224
G01 X76.25490 Y12.32583
G01 X76.28027 Y12.25276
G01 X76.31337 Y12.17074
G01 X76.32539 Y12.14471
G01 X76.39242 Y12.02406
G01 X76.42140 Y11.97559
G01 X76.44121 Y11.95017
G01 X76.46130 Y11.92533
G01 X76.54332 Y11.82398
G01 X76.54626 Y11.82083
G01 X76.61004 Y11.75939
G01 X76.68657 Y11.69259
G01 X76.73872 Y11.65355
G01 X76.81210 Y11.60399
G01 X76.84700 Y11.58286
G01 X76.94090 Y11.53518
G01 X76.95929 Y11.52586
G01 X77.02155 Y11.49718
G01 X77.04060 Y11.49111
G01 X77.19993 Y11.44237
G01 X77.20755 Y11.44006
G01 X77.28713 Y11.42652
G01 X77.40001 Y11.41245
G01 X77.45294 Y11.40986
G01 X77.54141 Y11.40986
G01 X77.59434 Y11.41245
G01 X77.70722 Y11.42652
G01 X77.78677 Y11.44006
G01 X77.79442 Y11.44237
G01 X77.95375 Y11.49111
G01 X77.97280 Y11.49718
G01 X78.03506 Y11.52586
G01 X78.14735 Y11.58288
G01 X78.18225 Y11.60399
G01 X78.25563 Y11.65355
G01 X78.30775 Y11.69256
G01 X78.37583 Y11.75200
G01 X78.38436 Y11.75936
G01 X78.45241 Y11.81727
G01 X78.47583 Y11.83655
G01 X78.53168 Y11.88108
G01 X78.56447 Y11.90541
G01 X78.56805 Y11.90808
G01 X78.58271 Y11.92594
G01 X78.63607 Y12.00579
G01 X78.71464 Y12.15276
G01 X78.75139 Y12.24148
G01 X78.76719 Y12.29355
G01 X78.76719 Y13.12441
G01 X78.75139 Y13.17653
G01 X78.71464 Y13.26528
G01 X78.63607 Y13.41224
G01 X78.58271 Y13.49210
G01 X78.56765 Y13.51044
G01 X78.46986 Y13.58494
G01 X78.56765 Y13.51046
G01 X78.56765 Y13.51044
G01 X78.57097 Y13.50792
G01 X78.66645 Y13.48616
G01 X78.73592 Y13.47859
G01 X78.82904 Y13.47734
G01 X78.92071 Y13.49372
G01 X78.96988 Y13.51265
G01 X79.00272 Y13.53701
G01 X79.05858 Y13.58153
G01 X79.08192 Y13.60079
G01 X79.14999 Y13.65872
G01 X79.15848 Y13.66604
G01 X79.22657 Y13.72547
G01 X79.27872 Y13.76451
G01 X79.35210 Y13.81404
G01 X79.38697 Y13.83518
G01 X79.49929 Y13.89220
G01 X79.56160 Y13.92090
G01 X79.58067 Y13.92697
G01 X79.73998 Y13.97572
G01 X79.74748 Y13.97798
G01 X79.81141 Y13.98943
G01 X79.82713 Y13.99151
G01 X79.94001 Y14.00559
G01 X79.99294 Y14.00818
G01 X80.08141 Y14.00818
G01 X80.13434 Y14.00559
G01 X80.23572 Y13.99296
G01 X80.24722 Y13.99154
G01 X80.32682 Y13.97798
G01 X80.33437 Y13.97572
G01 X80.49368 Y13.92697
G01 X80.51278 Y13.92090
G01 X80.57506 Y13.89220
G01 X80.68725 Y13.83525
G01 X80.69667 Y13.82954
G01 X80.72248 Y13.81448
G01 X80.72360 Y13.81384
G01 X80.73828 Y13.80541
G01 X80.79965 Y13.76942
G01 X80.88324 Y13.72583
G01 X80.93058 Y13.70401
G01 X80.94973 Y13.70058
G01 X81.04260 Y13.69306
G01 X81.13521 Y13.70325
G01 X81.22421 Y13.73078
G01 X81.27805 Y13.75324
G01 X81.28677 Y13.76225
G01 X81.38552 Y13.85740
G01 X81.48131 Y13.93769
G01 X81.56543 Y13.98054
G01 X81.66228 Y14.00617
G01 X81.68176 Y14.00813
G01 X81.72715 Y14.00927
G01 X83.42720 Y14.00927
G01 X83.47277 Y14.00813
G01 X83.49202 Y14.00617
G01 X83.58887 Y13.98057
G01 X83.58996 Y13.98008
G01 X83.67310 Y13.93764
G01 X83.69768 Y13.91915
G01 X83.74640 Y13.87828
G01 X83.80307 Y13.80869
G01 X83.80581 Y13.80493
G01 X83.81297 Y13.79230
G01 X83.84869 Y13.72080
G01 X83.87432 Y13.62387
G01 X83.87630 Y13.60434
G01 X83.87744 Y13.55900
G01 X83.87744 Y11.85901
G01 X83.87630 Y11.81369
G01 X83.87432 Y11.79419
G01 X83.84869 Y11.69723
G01 X83.80584 Y11.61313
G01 X83.74640 Y11.53975
G01 X83.67307 Y11.48037
G01 X83.58900 Y11.43752
G01 X83.49202 Y11.41189
G01 X83.47251 Y11.40991
G01 X83.42720 Y11.40877
G01 X81.72718 Y11.40877
G01 X81.68191 Y11.40991
G01 X81.66241 Y11.41186
G01 X81.56538 Y11.43752
G01 X81.52192 Y11.45827
G01 X81.48128 Y11.48037
G01 X81.38552 Y11.56063
G01 X81.36299 Y11.58232
G01 X81.35078 Y11.59434
G01 X81.27551 Y11.66957
G01 X81.27450 Y11.67150
G01 X81.24661 Y11.76343
G01 X81.23719 Y11.85901
G01 X81.23716 Y12.12004
G01 X81.24643 Y12.15713
G01 X81.26485 Y12.24951
G01 X81.28959 Y12.41613
G01 X81.29797 Y12.50112
G01 X81.30617 Y12.66777
G01 X81.30617 Y12.75029
G01 X81.29797 Y12.91692
G01 X81.28959 Y13.00190
G01 X81.26485 Y13.16853
G01 X81.24646 Y13.26088
G01 X81.23716 Y13.29797
G01 X81.17607 Y13.41224
G01 X81.12271 Y13.49210
G01 X81.01699 Y13.62090
G01 X80.94907 Y13.68882
G01 X80.93058 Y13.70401
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.02902 Y19.73453 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.02902 Y19.73453
G01 X77.13641 Y19.59458
G01 X77.28124 Y19.44975
G01 X77.37367 Y19.37883
G01 X77.37367 Y19.53832
G01 X77.32932 Y19.57471
G01 X77.26140 Y19.64263
G01 X77.18599 Y19.73453
G01 X77.02902 Y19.73453
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.05135 Y24.55789 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.05135 Y24.55789
G01 X72.02567 Y24.49589
G01 X71.98016 Y24.34582
G01 X71.96141 Y24.25162
G01 X71.94604 Y24.09553
G01 X71.94604 Y23.99950
G01 X71.95186 Y23.94054
G01 X71.96141 Y23.84341
G01 X71.98016 Y23.74920
G01 X72.02567 Y23.59912
G01 X72.06245 Y23.51039
G01 X72.07475 Y23.48733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.23218 Y23.24316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.23218 Y23.24316
G01 X71.21996 Y23.20768
G01 X71.20711 Y23.13780
G01 X71.19517 Y23.04898
G01 X71.19166 Y23.00785
G01 X71.18933 Y22.98423
G01 X71.16367 Y22.88720
G01 X71.12082 Y22.80308
G01 X71.06141 Y22.72975
G01 X70.98803 Y22.67031
G01 X70.90398 Y22.62749
G01 X70.80696 Y22.60183
G01 X70.78742 Y22.59988
G01 X70.74216 Y22.59874
G01 X69.04216 Y22.59874
G01 X68.99693 Y22.59988
G01 X68.97739 Y22.60183
G01 X68.88037 Y22.62749
G01 X68.82009 Y22.65708
G01 X68.79627 Y22.67034
G01 X68.77176 Y22.68880
G01 X68.72291 Y22.72975
G01 X68.67018 Y22.79404
G01 X68.66353 Y22.80308
G01 X68.62070 Y22.88713
G01 X68.59502 Y22.98421
G01 X68.59307 Y23.00374
G01 X68.59192 Y23.04898
G01 X68.59192 Y24.74897
G01 X68.59307 Y24.79424
G01 X68.59502 Y24.81377
G01 X68.62068 Y24.91077
G01 X68.66353 Y24.99490
G01 X68.72294 Y25.06823
G01 X68.79627 Y25.12764
G01 X68.88039 Y25.17049
G01 X68.97739 Y25.19614
G01 X68.99690 Y25.19810
G01 X69.04216 Y25.19924
G01 X70.74216 Y25.19924
G01 X70.78740 Y25.19810
G01 X70.80701 Y25.19614
G01 X70.85227 Y25.18560
G01 X70.90396 Y25.17049
G01 X70.98803 Y25.12764
G01 X71.01264 Y25.10912
G01 X71.06146 Y25.06820
G01 X71.07251 Y25.05570
G01 X71.12080 Y24.99490
G01 X71.16393 Y24.91021
G01 X71.16563 Y24.90518
G01 X71.16840 Y24.89680
G01 X71.21478 Y24.75474
G01 X71.21663 Y24.74900
G01 X71.23218 Y24.70033
G01 X71.23713 Y24.68486
G01 X71.39695 Y24.36411
G01 X71.44422 Y24.29426
G01 X71.58900 Y24.10724
G01 X71.61478 Y24.12815
G01 X71.77304 Y24.27016
G01 X71.82519 Y24.32243
G01 X71.88132 Y24.37580
G01 X71.88536 Y24.37943
G01 X72.00462 Y24.50226
G01 X72.04983 Y24.55606
G01 X72.05135 Y24.55789
G01 X72.05138 Y24.55791
G01 X72.07030 Y24.58044
G01 X72.09974 Y24.61725
G01 X72.12405 Y24.64920
G01 X72.16685 Y24.70668
G01 X72.18696 Y24.73599
G01 X72.21930 Y24.77849
G01 X72.31645 Y24.89858
G01 X72.31808 Y24.90031
G01 X72.38196 Y24.96185
G01 X72.45422 Y25.02492
G01 X72.50304 Y25.06147
G01 X72.57634 Y25.11095
G01 X72.60848 Y25.13040
G01 X72.71490 Y25.18446
G01 X72.77634 Y25.21280
G01 X72.79633 Y25.21918
G01 X72.94630 Y25.26505
G01 X72.95516 Y25.26772
G01 X73.03334 Y25.28095
G01 X73.14023 Y25.29426
G01 X73.18940 Y25.29670
G01 X73.27799 Y25.29670
G01 X73.32712 Y25.29426
G01 X73.42465 Y25.28212
G01 X73.43400 Y25.28095
G01 X73.51218 Y25.26772
G01 X73.52102 Y25.26505
G01 X73.67101 Y25.21918
G01 X73.69100 Y25.21280
G01 X73.75249 Y25.18443
G01 X73.85889 Y25.13040
G01 X73.89105 Y25.11092
G01 X73.96430 Y25.06149
G01 X74.01312 Y25.02492
G01 X74.08538 Y24.96185
G01 X74.14924 Y24.90036
G01 X74.15089 Y24.89860
G01 X74.24802 Y24.77854
G01 X74.26809 Y24.75278
G01 X74.29684 Y24.70465
G01 X74.36044 Y24.59015
G01 X74.37131 Y24.56660
G01 X74.40438 Y24.48458
G01 X74.42821 Y24.41598
G01 X74.44985 Y24.33450
G01 X74.46831 Y24.24798
G01 X74.47060 Y24.23404
G01 X74.48292 Y24.09182
G01 X74.48569 Y24.04753
G01 X74.48305 Y24.00475
G01 X74.48292 Y24.00320
G01 X74.47060 Y23.86109
G01 X74.46831 Y23.84707
G01 X74.44985 Y23.76058
G01 X74.42821 Y23.67907
G01 X74.40438 Y23.61047
G01 X74.37129 Y23.52840
G01 X74.36044 Y23.50488
G01 X74.29681 Y23.39038
G01 X74.26809 Y23.34227
G01 X74.24802 Y23.31651
G01 X74.15089 Y23.19645
G01 X74.14924 Y23.19470
G01 X74.08544 Y23.13325
G01 X74.01312 Y23.07011
G01 X73.96433 Y23.03358
G01 X73.89097 Y22.98408
G01 X73.85892 Y22.96465
G01 X73.84152 Y22.95583
G01 X73.75244 Y22.91060
G01 X73.69100 Y22.88225
G01 X73.67101 Y22.87588
G01 X73.52102 Y22.83000
G01 X73.51218 Y22.82734
G01 X73.43400 Y22.81410
G01 X73.32712 Y22.80079
G01 X73.27799 Y22.79835
G01 X73.18940 Y22.79835
G01 X73.14023 Y22.80079
G01 X73.03334 Y22.81410
G01 X72.95516 Y22.82734
G01 X72.94630 Y22.83000
G01 X72.79633 Y22.87588
G01 X72.77634 Y22.88225
G01 X72.71495 Y22.91057
G01 X72.60848 Y22.96465
G01 X72.57640 Y22.98405
G01 X72.50302 Y23.03358
G01 X72.45422 Y23.07013
G01 X72.38191 Y23.13325
G01 X72.31808 Y23.19475
G01 X72.31645 Y23.19647
G01 X72.21930 Y23.31657
G01 X72.21528 Y23.32157
G01 X72.20078 Y23.33976
G01 X72.19273 Y23.35002
G01 X72.16418 Y23.38690
G01 X72.08861 Y23.47323
G01 X72.07475 Y23.48733
G01 X72.03025 Y23.51202
G01 X71.94488 Y23.54928
G01 X71.85402 Y23.56973
G01 X71.76090 Y23.57260
G01 X71.69118 Y23.56810
G01 X71.59928 Y23.55332
G01 X71.51181 Y23.52142
G01 X71.43197 Y23.47354
G01 X71.37574 Y23.43208
G01 X71.30629 Y23.36985
G01 X71.25059 Y23.29655
G01 X71.23218 Y23.24316
G01 X71.23218 Y24.70033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.63404 Y28.86768 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.63404 Y28.86768
G01 X68.63404 Y33.33552
G01 X68.63465 Y33.34476
G01 X68.64349 Y33.37776
G01 X68.65238 Y33.39318
G01 X68.66497 Y33.40578
G01 X68.68042 Y33.41469
G01 X68.69761 Y33.41929
G01 X68.71544 Y33.41929
G01 X68.73264 Y33.41469
G01 X68.74808 Y33.40578
G01 X68.76071 Y33.39315
G01 X68.76962 Y33.37771
G01 X68.77841 Y33.34487
G01 X68.77902 Y33.33560
G01 X68.77902 Y31.77123
G01 X68.78844 Y31.67565
G01 X68.81633 Y31.58373
G01 X68.86160 Y31.49902
G01 X68.92253 Y31.42475
G01 X68.99680 Y31.36382
G01 X69.08151 Y31.31856
G01 X69.17343 Y31.29067
G01 X69.26904 Y31.28124
G01 X70.71546 Y31.28124
G01 X70.81105 Y31.29067
G01 X70.90297 Y31.31856
G01 X70.98768 Y31.36382
G01 X71.06195 Y31.42475
G01 X71.12288 Y31.49902
G01 X71.16814 Y31.58373
G01 X71.19603 Y31.67565
G01 X71.20546 Y31.77123
G01 X71.20546 Y33.33552
G01 X71.20607 Y33.34476
G01 X71.21488 Y33.37771
G01 X71.22380 Y33.39315
G01 X71.23642 Y33.40578
G01 X71.25184 Y33.41469
G01 X71.26903 Y33.41929
G01 X71.28689 Y33.41929
G01 X71.30408 Y33.41469
G01 X71.31950 Y33.40578
G01 X71.33210 Y33.39318
G01 X71.34104 Y33.37771
G01 X71.34986 Y33.34476
G01 X71.35046 Y33.33552
G01 X71.35046 Y28.86768
G01 X71.34986 Y28.85844
G01 X71.34104 Y28.82550
G01 X71.33210 Y28.81003
G01 X71.31950 Y28.79743
G01 X71.30408 Y28.78851
G01 X71.28689 Y28.78392
G01 X71.26903 Y28.78392
G01 X71.25184 Y28.78851
G01 X71.23642 Y28.79743
G01 X71.22380 Y28.81005
G01 X71.21488 Y28.82550
G01 X71.20607 Y28.85844
G01 X71.20546 Y28.86768
G01 X71.20546 Y30.64624
G01 X71.19603 Y30.74185
G01 X71.16814 Y30.83377
G01 X71.12288 Y30.91848
G01 X71.06195 Y30.99275
G01 X70.98768 Y31.05368
G01 X70.90297 Y31.09895
G01 X70.81105 Y31.12684
G01 X70.71546 Y31.13626
G01 X69.26904 Y31.13626
G01 X69.17343 Y31.12684
G01 X69.08151 Y31.09895
G01 X68.99680 Y31.05368
G01 X68.92253 Y30.99275
G01 X68.86160 Y30.91848
G01 X68.81633 Y30.83377
G01 X68.78844 Y30.74185
G01 X68.77902 Y30.64624
G01 X68.77902 Y28.86761
G01 X68.77841 Y28.85834
G01 X68.76962 Y28.82550
G01 X68.76071 Y28.81005
G01 X68.74808 Y28.79743
G01 X68.73264 Y28.78851
G01 X68.71544 Y28.78392
G01 X68.69761 Y28.78392
G01 X68.68042 Y28.78851
G01 X68.66497 Y28.79743
G01 X68.65238 Y28.81003
G01 X68.64349 Y28.82544
G01 X68.63465 Y28.85844
G01 X68.63404 Y28.86768
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.14879 Y23.19569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.14879 Y23.19569
G01 X58.10216 Y23.16343
G01 X58.02075 Y23.11796
G01 X57.93223 Y23.08875
G01 X57.83977 Y23.07681
G01 X57.76995 Y23.07450
G01 X57.67704 Y23.08027
G01 X57.58689 Y23.10351
G01 X57.50279 Y23.14336
G01 X57.44277 Y23.17915
G01 X57.36761 Y23.23429
G01 X57.30424 Y23.30267
G01 X57.25499 Y23.38182
G01 X57.25019 Y23.39144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.19832 Y21.22706 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.19832 Y21.22706
G01 X58.14724 Y21.30610
G01 X58.13820 Y21.39798
G01 X58.13820 Y23.09797
G01 X58.14760 Y23.19358
G01 X58.14772 Y23.19399
G01 X58.14879 Y23.19569
G01 X58.15641 Y23.20780
G01 X58.23337 Y23.32091
G01 X58.30891 Y23.41723
G01 X58.38227 Y23.47664
G01 X58.46639 Y23.51949
G01 X58.56339 Y23.54514
G01 X58.58290 Y23.54710
G01 X58.62819 Y23.54824
G01 X60.32819 Y23.54824
G01 X60.37340 Y23.54710
G01 X60.39301 Y23.54511
G01 X60.43266 Y23.53605
G01 X60.48996 Y23.51949
G01 X60.49113 Y23.51898
G01 X60.57403 Y23.47664
G01 X60.59864 Y23.45812
G01 X60.64746 Y23.41720
G01 X60.67291 Y23.38766
G01 X60.70685 Y23.34385
G01 X60.70906 Y23.34001
G01 X60.74967 Y23.25980
G01 X60.77533 Y23.16277
G01 X60.77728 Y23.14324
G01 X60.77843 Y23.09797
G01 X60.77843 Y21.39798
G01 X60.77728 Y21.35274
G01 X60.77533 Y21.33318
G01 X60.75135 Y21.24136
G01 X60.74970 Y21.23625
G01 X60.70682 Y21.15208
G01 X60.64741 Y21.07875
G01 X60.57403 Y21.01931
G01 X60.48998 Y20.97649
G01 X60.39296 Y20.95083
G01 X60.37342 Y20.94888
G01 X60.32819 Y20.94774
G01 X58.62819 Y20.94774
G01 X58.58293 Y20.94888
G01 X58.56339 Y20.95083
G01 X58.46634 Y20.97651
G01 X58.41110 Y21.00339
G01 X58.38229 Y21.01931
G01 X58.36687 Y21.03077
G01 X58.30891 Y21.07875
G01 X58.23337 Y21.17507
G01 X58.21059 Y21.20857
G01 X58.19832 Y21.22706
G01 X58.14696 Y21.30651
G01 X58.06949 Y21.35109
G01 X58.00594 Y21.38012
G01 X57.91790 Y21.41057
G01 X57.82573 Y21.42386
G01 X57.73269 Y21.41944
G01 X57.66939 Y21.41035
G01 X57.66352 Y21.40951
G01 X57.57292 Y21.38754
G01 X57.48814 Y21.34883
G01 X57.41221 Y21.29475
G01 X57.35941 Y21.24898
G01 X57.29515 Y21.18157
G01 X57.26855 Y21.14017
G01 X57.25019 Y21.07900
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.86319 Y20.28485 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.86319 Y20.28485
G01 X56.85672 Y20.28071
G01 X56.85578 Y20.28043
G01 X56.76020 Y20.27100
G01 X55.42860 Y20.27100
G01 X55.48969 Y20.25266
G01 X55.53119 Y20.22597
G01 X55.59863 Y20.16168
G01 X55.64437 Y20.10888
G01 X55.69838 Y20.03303
G01 X55.73703 Y19.94832
G01 X55.75901 Y19.85785
G01 X55.76896 Y19.78868
G01 X55.77341 Y19.69559
G01 X55.76015 Y19.60334
G01 X55.72967 Y19.51525
G01 X55.70064 Y19.45170
G01 X55.68098 Y19.41883
G01 X55.54979 Y19.30629
G01 X55.54818 Y19.30522
G01 X55.51834 Y19.28409
G01 X55.48154 Y19.25688
G01 X55.47615 Y19.25251
G01 X55.30330 Y19.11129
G01 X55.29452 Y19.10304
G01 X55.23300 Y19.03936
G01 X55.15080 Y18.94553
G01 X55.08377 Y18.85752
G01 X55.03361 Y18.78447
G01 X55.01992 Y18.76229
G01 X54.92248 Y18.57713
G01 X54.91509 Y18.56278
G01 X54.88969 Y18.49491
G01 X54.84186 Y18.34967
G01 X54.82149 Y18.26979
G01 X54.80384 Y18.18307
G01 X54.79563 Y18.12933
G01 X54.78060 Y17.94896
G01 X54.77798 Y17.90469
G01 X54.78060 Y17.86039
G01 X54.79563 Y17.68003
G01 X54.80384 Y17.62630
G01 X54.82149 Y17.53959
G01 X54.84186 Y17.45966
G01 X54.88969 Y17.31444
G01 X54.91506 Y17.24660
G01 X54.92248 Y17.23220
G01 X55.01992 Y17.04708
G01 X55.03361 Y17.02488
G01 X55.08377 Y16.95183
G01 X55.15080 Y16.86382
G01 X55.19365 Y16.81493
G01 X55.23300 Y16.76997
G01 X55.29454 Y16.70632
G01 X55.30330 Y16.69809
G01 X55.46876 Y16.56288
G01 X55.47618 Y16.55684
G01 X55.47788 Y16.55544
G01 X55.55083 Y16.50906
G01 X55.67138 Y16.44023
G01 X55.75832 Y16.39821
G01 X55.82814 Y16.36801
G01 X55.83978 Y16.36367
G01 X55.87750 Y16.34978
G01 X56.06482 Y16.29512
G01 X56.09406 Y16.28717
G01 X56.15187 Y16.27843
G01 X56.31397 Y16.25930
G01 X56.31755 Y16.25890
G01 X56.38598 Y16.25552
G01 X56.47440 Y16.25552
G01 X56.54275 Y16.25890
G01 X56.70848 Y16.27843
G01 X56.76629 Y16.28717
G01 X56.79553 Y16.29512
G01 X56.98283 Y16.34978
G01 X57.02057 Y16.36367
G01 X57.06878 Y16.38295
G01 X57.10203 Y16.39821
G01 X57.18897 Y16.44023
G01 X57.30952 Y16.50906
G01 X57.38255 Y16.55549
G01 X57.38417 Y16.55684
G01 X57.55705 Y16.69809
G01 X57.56581 Y16.70632
G01 X57.62735 Y16.76997
G01 X57.70955 Y16.86385
G01 X57.77658 Y16.95183
G01 X57.82674 Y17.02488
G01 X57.84043 Y17.04708
G01 X57.93787 Y17.23220
G01 X57.94528 Y17.24660
G01 X57.97066 Y17.31444
G01 X58.01849 Y17.45966
G01 X58.03886 Y17.53959
G01 X58.05651 Y17.62630
G01 X58.06472 Y17.68003
G01 X58.07975 Y17.86039
G01 X58.08237 Y17.90469
G01 X58.07975 Y17.94896
G01 X58.06472 Y18.12935
G01 X58.05651 Y18.18307
G01 X58.03886 Y18.26979
G01 X58.01849 Y18.34967
G01 X57.97066 Y18.49491
G01 X57.94526 Y18.56278
G01 X57.93787 Y18.57713
G01 X57.84043 Y18.76229
G01 X57.82674 Y18.78447
G01 X57.77658 Y18.85752
G01 X57.70955 Y18.94553
G01 X57.62481 Y19.04225
G01 X57.56583 Y19.10304
G01 X57.55705 Y19.11129
G01 X57.43673 Y19.20956
G01 X57.38420 Y19.25251
G01 X57.38250 Y19.25391
G01 X57.30952 Y19.30032
G01 X57.18900 Y19.36910
G01 X57.12850 Y19.39836
G01 X57.10226 Y19.41157
G01 X57.02281 Y19.45323
G01 X57.01280 Y19.45853
G01 X56.95006 Y19.49239
G01 X56.90767 Y19.51982
G01 X56.89568 Y19.52760
G01 X56.87559 Y19.54792
G01 X56.82375 Y19.62534
G01 X56.78753 Y19.71119
G01 X56.76660 Y19.77786
G01 X56.74727 Y19.86900
G01 X56.74554 Y19.96214
G01 X56.76147 Y20.05394
G01 X56.77991 Y20.12132
G01 X56.82118 Y20.22447
G01 X56.86319 Y20.28485
G01 X56.86322 Y20.28487
G01 X56.89588 Y20.30578
G01 X56.93162 Y20.32980
G01 X56.99540 Y20.37474
G01 X57.07942 Y20.44177
G01 X57.13391 Y20.50842
G01 X57.13883 Y20.51515
G01 X57.18168 Y20.59922
G01 X57.20731 Y20.69617
G01 X57.20929 Y20.71571
G01 X57.21044 Y20.76102
G01 X57.21044 Y20.81167
G01 X57.21973 Y20.94116
G01 X57.22979 Y21.01103
G01 X57.25019 Y21.07900
G01 X57.25019 Y23.39144
G01 X57.23629 Y23.45055
G01 X57.21227 Y23.62256
G01 X57.21130 Y23.64435
G01 X57.21044 Y23.68431
G01 X57.21044 Y23.96101
G01 X57.20929 Y24.00635
G01 X57.20731 Y24.02589
G01 X57.18168 Y24.12284
G01 X57.14628 Y24.19378
G01 X57.13886 Y24.20689
G01 X57.09146 Y24.26663
G01 X57.07940 Y24.28032
G01 X57.00604 Y24.33970
G01 X56.92199 Y24.38253
G01 X56.82497 Y24.40818
G01 X56.80538 Y24.41014
G01 X56.76017 Y24.41128
G01 X53.56015 Y24.41128
G01 X53.51492 Y24.41014
G01 X53.49541 Y24.40818
G01 X53.39835 Y24.38253
G01 X53.31425 Y24.33968
G01 X53.24093 Y24.28027
G01 X53.18151 Y24.20694
G01 X53.13866 Y24.12284
G01 X53.11304 Y24.02586
G01 X53.11105 Y24.00635
G01 X53.10994 Y23.96101
G01 X53.10994 Y20.76102
G01 X53.11105 Y20.71571
G01 X53.11304 Y20.69620
G01 X53.13013 Y20.62704
G01 X53.13869 Y20.59920
G01 X53.18151 Y20.51515
G01 X53.24093 Y20.44177
G01 X53.31045 Y20.38518
G01 X53.31425 Y20.38238
G01 X53.34174 Y20.36714
G01 X53.39838 Y20.33953
G01 X53.49538 Y20.31388
G01 X53.51492 Y20.31192
G01 X53.56015 Y20.31078
G01 X55.16122 Y20.31078
G01 X55.29073 Y20.30146
G01 X55.36058 Y20.29143
G01 X55.42855 Y20.27100
G01 X55.42860 Y20.27100
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.66576 Y19.40578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.66576 Y19.40578
G01 X55.73998 Y19.44545
G01 X55.82873 Y19.48221
G01 X56.05385 Y19.55051
G01 X56.14806 Y19.56925
G01 X56.15154 Y19.56958
G01 X56.38217 Y19.59229
G01 X56.47821 Y19.59229
G01 X56.71232 Y19.56925
G01 X56.80653 Y19.55051
G01 X56.90767 Y19.51982
G01 X56.90769 Y19.51982
G01 X56.95006 Y19.49239
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.50591 Y7.45325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.50591 Y7.45325
G01 X59.48734 Y7.43062
G01 X59.43398 Y7.35076
G01 X59.30462 Y7.10872
G01 X59.28018 Y7.04969
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.05532 Y7.45221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.05532 Y7.45221
G01 X59.05943 Y7.44898
G01 X59.07777 Y7.43458
G01 X59.16735 Y7.37266
G01 X59.19740 Y7.35251
G01 X59.26436 Y7.30908
G01 X59.28018 Y7.29894
G01 X59.39441 Y7.37197
G01 X59.48211 Y7.43491
G01 X59.50591 Y7.45325
G01 X59.50594 Y7.45327
G01 X59.50911 Y7.45571
G01 X59.53710 Y7.47730
G01 X59.59192 Y7.52269
G01 X59.68722 Y7.61370
G01 X59.69131 Y7.61825
G01 X59.75389 Y7.68081
G01 X59.81081 Y7.73242
G01 X59.96570 Y7.85536
G01 X60.00114 Y7.88208
G01 X60.03934 Y7.90456
G01 X60.21221 Y8.00062
G01 X60.28163 Y8.03346
G01 X60.36342 Y8.06735
G01 X60.43570 Y8.09320
G01 X60.62590 Y8.14751
G01 X60.66885 Y8.15863
G01 X60.71277 Y8.16478
G01 X60.90921 Y8.18739
G01 X60.98594 Y8.19114
G01 X61.07441 Y8.19114
G01 X61.15112 Y8.18739
G01 X61.34759 Y8.16478
G01 X61.39151 Y8.15863
G01 X61.43446 Y8.14751
G01 X61.62463 Y8.09320
G01 X61.69694 Y8.06732
G01 X61.77870 Y8.03346
G01 X61.84812 Y8.00062
G01 X62.02102 Y7.90456
G01 X62.05920 Y7.88208
G01 X62.09465 Y7.85533
G01 X62.24952 Y7.73242
G01 X62.30646 Y7.68081
G01 X62.36900 Y7.61827
G01 X62.37311 Y7.61370
G01 X62.44286 Y7.54464
G01 X62.48274 Y7.50915
G01 X62.55533 Y7.45218
G01 X62.55942 Y7.44898
G01 X62.62135 Y7.42838
G01 X62.70192 Y7.41581
G01 X62.77161 Y7.41083
G01 X62.86471 Y7.41307
G01 X62.95566 Y7.43283
G01 X63.00910 Y7.45571
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.55533 Y7.45218 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.55533 Y7.45218
G01 X62.57301 Y7.43062
G01 X62.62638 Y7.35076
G01 X62.75577 Y7.10872
G01 X62.78017 Y7.04972
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.28017 Y4.93418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.28017 Y4.93418
G01 X66.30460 Y4.87523
G01 X66.43399 Y4.63319
G01 X66.48736 Y4.55333
G01 X66.50506 Y4.53177
G01 X66.57760 Y4.47482
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.05124 Y4.52826 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.05124 Y4.52826
G01 X66.10463 Y4.55112
G01 X66.19561 Y4.57091
G01 X66.28873 Y4.57314
G01 X66.35842 Y4.56816
G01 X66.43899 Y4.55559
G01 X66.50092 Y4.53499
G01 X66.57760 Y4.47482
G01 X66.61748 Y4.43934
G01 X66.68728 Y4.37020
G01 X66.69134 Y4.36570
G01 X66.75388 Y4.30317
G01 X66.76493 Y4.29316
G01 X66.81080 Y4.25158
G01 X66.96569 Y4.12864
G01 X67.00115 Y4.10190
G01 X67.03935 Y4.07942
G01 X67.21222 Y3.98336
G01 X67.28166 Y3.95051
G01 X67.36343 Y3.91663
G01 X67.36907 Y3.91462
G01 X67.43572 Y3.89077
G01 X67.62589 Y3.83647
G01 X67.66884 Y3.82534
G01 X67.71275 Y3.81920
G01 X67.90922 Y3.79659
G01 X67.98593 Y3.79283
G01 X68.07440 Y3.79283
G01 X68.15111 Y3.79659
G01 X68.34758 Y3.81920
G01 X68.39152 Y3.82534
G01 X68.43444 Y3.83647
G01 X68.62464 Y3.89077
G01 X68.69693 Y3.91663
G01 X68.77871 Y3.95051
G01 X68.84813 Y3.98336
G01 X69.02101 Y4.07942
G01 X69.05921 Y4.10190
G01 X69.09464 Y4.12862
G01 X69.24953 Y4.25155
G01 X69.30645 Y4.30317
G01 X69.36904 Y4.36573
G01 X69.42057 Y4.42262
G01 X69.54353 Y4.57754
G01 X69.57026 Y4.61295
G01 X69.59273 Y4.65115
G01 X69.68882 Y4.82404
G01 X69.72164 Y4.89344
G01 X69.75552 Y4.97523
G01 X69.78138 Y5.04754
G01 X69.83568 Y5.23771
G01 X69.84681 Y5.28064
G01 X69.85296 Y5.32453
G01 X69.87556 Y5.52102
G01 X69.87935 Y5.59770
G01 X69.88044 Y5.64198
G01 X69.88044 Y6.34197
G01 X69.87935 Y6.38627
G01 X69.87556 Y6.46295
G01 X69.85296 Y6.65945
G01 X69.84681 Y6.70334
G01 X69.83568 Y6.74627
G01 X69.78138 Y6.93644
G01 X69.75552 Y7.00875
G01 X69.72164 Y7.09054
G01 X69.68880 Y7.15993
G01 X69.59586 Y7.32719
G01 X69.59273 Y7.33283
G01 X69.57026 Y7.37100
G01 X69.54353 Y7.40644
G01 X69.42057 Y7.56135
G01 X69.36904 Y7.61825
G01 X69.30645 Y7.68081
G01 X69.24953 Y7.73242
G01 X69.09464 Y7.85536
G01 X69.05921 Y7.88208
G01 X69.02101 Y7.90456
G01 X68.84813 Y8.00062
G01 X68.77871 Y8.03346
G01 X68.69693 Y8.06735
G01 X68.62464 Y8.09320
G01 X68.43444 Y8.14751
G01 X68.39152 Y8.15863
G01 X68.34758 Y8.16478
G01 X68.15113 Y8.18739
G01 X68.07440 Y8.19114
G01 X67.98593 Y8.19114
G01 X67.90922 Y8.18739
G01 X67.71275 Y8.16478
G01 X67.66884 Y8.15863
G01 X67.62589 Y8.14751
G01 X67.43572 Y8.09320
G01 X67.36343 Y8.06732
G01 X67.28166 Y8.03346
G01 X67.21222 Y8.00062
G01 X67.03935 Y7.90456
G01 X67.00115 Y7.88208
G01 X66.96569 Y7.85533
G01 X66.81082 Y7.73242
G01 X66.75388 Y7.68081
G01 X66.69134 Y7.61827
G01 X66.68723 Y7.61370
G01 X66.59185 Y7.52264
G01 X66.53701 Y7.47723
G01 X66.50910 Y7.45571
G01 X66.50905 Y7.45569
G01 X66.45566 Y7.43283
G01 X66.36467 Y7.41307
G01 X66.27161 Y7.41083
G01 X66.20194 Y7.41581
G01 X66.12134 Y7.42838
G01 X66.05942 Y7.44898
G01 X66.05530 Y7.45221
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.50905 Y7.45569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.50905 Y7.45569
G01 X66.50595 Y7.45330
G01 X66.48736 Y7.43062
G01 X66.43399 Y7.35076
G01 X66.30460 Y7.10872
G01 X66.28017 Y7.04972
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.00499 Y4.53179 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.00499 Y4.53179
G01 X62.98736 Y4.55333
G01 X62.93400 Y4.63319
G01 X62.80461 Y4.87523
G01 X62.78017 Y4.93418
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.55127 Y4.52826 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.55127 Y4.52826
G01 X62.55452 Y4.53078
G01 X62.57301 Y4.55333
G01 X62.62638 Y4.63319
G01 X62.75577 Y4.87523
G01 X62.78017 Y4.93418
G01 X62.78017 Y7.04972
G01 X62.80461 Y7.10872
G01 X62.93400 Y7.35076
G01 X62.98736 Y7.43062
G01 X63.00596 Y7.45327
G01 X63.00910 Y7.45571
G01 X63.03702 Y7.47723
G01 X63.09186 Y7.52264
G01 X63.18726 Y7.61375
G01 X63.19135 Y7.61827
G01 X63.25388 Y7.68081
G01 X63.31081 Y7.73242
G01 X63.46570 Y7.85533
G01 X63.50113 Y7.88208
G01 X63.53933 Y7.90456
G01 X63.71223 Y8.00062
G01 X63.78165 Y8.03346
G01 X63.86341 Y8.06732
G01 X63.93572 Y8.09320
G01 X64.12589 Y8.14751
G01 X64.16884 Y8.15863
G01 X64.21276 Y8.16478
G01 X64.40920 Y8.18739
G01 X64.48594 Y8.19114
G01 X64.57441 Y8.19114
G01 X64.65111 Y8.18739
G01 X64.84758 Y8.16478
G01 X64.89150 Y8.15863
G01 X64.93445 Y8.14751
G01 X65.12465 Y8.09320
G01 X65.19693 Y8.06735
G01 X65.27872 Y8.03346
G01 X65.34811 Y8.00062
G01 X65.52101 Y7.90456
G01 X65.55924 Y7.88205
G01 X65.59465 Y7.85536
G01 X65.74954 Y7.73242
G01 X65.80646 Y7.68081
G01 X65.86904 Y7.61825
G01 X65.87313 Y7.61370
G01 X65.94288 Y7.54464
G01 X65.98273 Y7.50915
G01 X66.05530 Y7.45221
G01 X66.07303 Y7.43062
G01 X66.12640 Y7.35076
G01 X66.25576 Y7.10872
G01 X66.28017 Y7.04972
G01 X66.28017 Y4.93418
G01 X66.25576 Y4.87523
G01 X66.12640 Y4.63319
G01 X66.07303 Y4.55333
G01 X66.05454 Y4.53080
G01 X66.05124 Y4.52826
G01 X66.02325 Y4.50667
G01 X65.96843 Y4.46128
G01 X65.87313 Y4.37027
G01 X65.86904 Y4.36573
G01 X65.80646 Y4.30317
G01 X65.74954 Y4.25155
G01 X65.59465 Y4.12862
G01 X65.55921 Y4.10190
G01 X65.52101 Y4.07942
G01 X65.34814 Y3.98336
G01 X65.27872 Y3.95051
G01 X65.19693 Y3.91663
G01 X65.12465 Y3.89077
G01 X64.93445 Y3.83647
G01 X64.89152 Y3.82534
G01 X64.84758 Y3.81920
G01 X64.65111 Y3.79659
G01 X64.57441 Y3.79283
G01 X64.48594 Y3.79283
G01 X64.40923 Y3.79659
G01 X64.21276 Y3.81920
G01 X64.16884 Y3.82534
G01 X64.12589 Y3.83647
G01 X63.93570 Y3.89080
G01 X63.86905 Y3.91462
G01 X63.86341 Y3.91663
G01 X63.78162 Y3.95051
G01 X63.71223 Y3.98333
G01 X63.53933 Y4.07942
G01 X63.50115 Y4.10190
G01 X63.46570 Y4.12864
G01 X63.31081 Y4.25158
G01 X63.26491 Y4.29318
G01 X63.25388 Y4.30317
G01 X63.19135 Y4.36570
G01 X63.18721 Y4.37027
G01 X63.11756 Y4.43926
G01 X63.07771 Y4.47474
G01 X63.00504 Y4.53177
G01 X63.00499 Y4.53179
G01 X63.00095 Y4.53499
G01 X62.93905 Y4.55559
G01 X62.85843 Y4.56816
G01 X62.78873 Y4.57314
G01 X62.69562 Y4.57091
G01 X62.60464 Y4.55112
G01 X62.55127 Y4.52826
G01 X62.55124 Y4.52826
G01 X62.52325 Y4.50667
G01 X62.46844 Y4.46128
G01 X62.37314 Y4.37027
G01 X62.36900 Y4.36570
G01 X62.30646 Y4.30317
G01 X62.24954 Y4.25158
G01 X62.09465 Y4.12864
G01 X62.05922 Y4.10190
G01 X62.02102 Y4.07942
G01 X61.84812 Y3.98336
G01 X61.77870 Y3.95051
G01 X61.69694 Y3.91666
G01 X61.62463 Y3.89077
G01 X61.43446 Y3.83647
G01 X61.39151 Y3.82534
G01 X61.34759 Y3.81920
G01 X61.15112 Y3.79659
G01 X61.07441 Y3.79283
G01 X60.98594 Y3.79283
G01 X60.90924 Y3.79659
G01 X60.71277 Y3.81920
G01 X60.66882 Y3.82534
G01 X60.62590 Y3.83647
G01 X60.43570 Y3.89077
G01 X60.36905 Y3.91462
G01 X60.36342 Y3.91663
G01 X60.28163 Y3.95051
G01 X60.21221 Y3.98336
G01 X60.03934 Y4.07942
G01 X60.00114 Y4.10190
G01 X59.96570 Y4.12862
G01 X59.81081 Y4.25155
G01 X59.75389 Y4.30317
G01 X59.69131 Y4.36573
G01 X59.68722 Y4.37027
G01 X59.61747 Y4.43934
G01 X59.57762 Y4.47482
G01 X59.50093 Y4.53499
G01 X59.43898 Y4.55559
G01 X59.35841 Y4.56816
G01 X59.28872 Y4.57314
G01 X59.19560 Y4.57091
G01 X59.10462 Y4.55112
G01 X59.05128 Y4.52829
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.57762 Y4.47482 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.57762 Y4.47482
G01 X59.50505 Y4.53177
G01 X59.48734 Y4.55333
G01 X59.43398 Y4.63319
G01 X59.30462 Y4.87523
G01 X59.28018 Y4.93415
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.04666 Y8.16232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.04666 Y8.16232
G01 X57.02370 Y8.14885
G01 X56.96111 Y8.11456
G01 X56.86319 Y8.06808
G01 X56.83416 Y8.05635
G01 X56.82568 Y8.05287
G01 X56.78163 Y8.03346
G01 X56.71222 Y8.00062
G01 X56.53934 Y7.90456
G01 X56.50114 Y7.88208
G01 X56.46571 Y7.85536
G01 X56.31082 Y7.73242
G01 X56.25390 Y7.68081
G01 X56.19131 Y7.61825
G01 X56.13978 Y7.56135
G01 X56.01682 Y7.40644
G01 X55.99009 Y7.37103
G01 X55.96762 Y7.33283
G01 X55.87153 Y7.15993
G01 X55.83871 Y7.09054
G01 X55.80483 Y7.00875
G01 X55.77897 Y6.93644
G01 X55.72466 Y6.74627
G01 X55.71354 Y6.70334
G01 X55.70739 Y6.65945
G01 X55.68479 Y6.46295
G01 X55.68100 Y6.38627
G01 X55.67993 Y6.34197
G01 X55.67993 Y5.64198
G01 X55.68100 Y5.59770
G01 X55.68479 Y5.52102
G01 X55.70739 Y5.32453
G01 X55.71354 Y5.28064
G01 X55.72466 Y5.23771
G01 X55.77897 Y5.04754
G01 X55.80483 Y4.97523
G01 X55.83871 Y4.89344
G01 X55.87153 Y4.82404
G01 X55.96762 Y4.65115
G01 X55.99009 Y4.61295
G01 X56.01682 Y4.57754
G01 X56.13978 Y4.42262
G01 X56.19131 Y4.36573
G01 X56.25390 Y4.30317
G01 X56.31082 Y4.25155
G01 X56.46571 Y4.12862
G01 X56.50114 Y4.10190
G01 X56.53934 Y4.07942
G01 X56.71222 Y3.98336
G01 X56.78163 Y3.95051
G01 X56.86342 Y3.91663
G01 X56.86906 Y3.91462
G01 X56.93571 Y3.89077
G01 X57.12591 Y3.83647
G01 X57.16883 Y3.82534
G01 X57.21277 Y3.81920
G01 X57.40922 Y3.79659
G01 X57.48595 Y3.79283
G01 X57.57442 Y3.79283
G01 X57.65113 Y3.79659
G01 X57.84760 Y3.81920
G01 X57.89151 Y3.82534
G01 X57.93446 Y3.83647
G01 X58.12463 Y3.89077
G01 X58.19692 Y3.91666
G01 X58.27868 Y3.95051
G01 X58.34813 Y3.98336
G01 X58.52100 Y4.07942
G01 X58.55920 Y4.10190
G01 X58.59466 Y4.12864
G01 X58.74952 Y4.25155
G01 X58.80647 Y4.30317
G01 X58.86901 Y4.36570
G01 X58.87312 Y4.37027
G01 X58.96842 Y4.46128
G01 X59.02324 Y4.50667
G01 X59.05128 Y4.52829
G01 X59.05453 Y4.53080
G01 X59.07302 Y4.55333
G01 X59.12638 Y4.63319
G01 X59.25577 Y4.87523
G01 X59.28018 Y4.93415
G01 X59.28018 Y7.04969
G01 X59.25577 Y7.10872
G01 X59.12638 Y7.35076
G01 X59.07302 Y7.43062
G01 X59.05532 Y7.45221
G01 X58.98275 Y7.50915
G01 X58.94287 Y7.54464
G01 X58.87312 Y7.61370
G01 X58.86901 Y7.61827
G01 X58.80647 Y7.68081
G01 X58.74952 Y7.73242
G01 X58.59466 Y7.85533
G01 X58.55920 Y7.88208
G01 X58.52100 Y7.90456
G01 X58.34813 Y8.00062
G01 X58.27868 Y8.03346
G01 X58.19692 Y8.06732
G01 X58.12463 Y8.09320
G01 X57.93446 Y8.14751
G01 X57.89151 Y8.15863
G01 X57.84760 Y8.16478
G01 X57.65113 Y8.18739
G01 X57.57442 Y8.19114
G01 X57.48595 Y8.19114
G01 X57.40919 Y8.18739
G01 X57.37516 Y8.18347
G01 X57.24485 Y8.17786
G01 X57.21138 Y8.17880
G01 X57.17434 Y8.17913
G01 X57.11651 Y8.17850
G01 X57.10109 Y8.17862
G01 X57.09733 Y8.17867
G01 X57.05014 Y8.16435
G01 X57.04666 Y8.16232
G01 X57.07165 Y8.18820
G01 X57.08110 Y8.18375
G01 X57.10109 Y8.17862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.85573 Y9.17489 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.85573 Y9.17489
G01 X56.85164 Y9.17250
G01 X56.81283 Y9.16071
G01 X56.80983 Y9.16076
G01 X56.80980 Y9.16079
G01 X56.80587 Y9.16087
G01 X56.80983 Y9.16076
G01 X56.82136 Y9.15789
G01 X56.83360 Y9.15223
G01 X56.85575 Y9.17491
G01 X56.88570 Y9.19246
G01 X56.94836 Y9.22655
G01 X57.02100 Y9.26208
G01 X57.05664 Y9.27763
G01 X57.05712 Y9.27786
G01 X57.07061 Y9.28375
G01 X57.10203 Y9.29820
G01 X57.18897 Y9.34024
G01 X57.30952 Y9.40902
G01 X57.38255 Y9.45548
G01 X57.55705 Y9.59808
G01 X57.56583 Y9.60633
G01 X57.62735 Y9.66998
G01 X57.70955 Y9.76381
G01 X57.77658 Y9.85185
G01 X57.82674 Y9.92487
G01 X57.84043 Y9.94707
G01 X57.93787 Y10.13221
G01 X57.94528 Y10.14659
G01 X57.97066 Y10.21443
G01 X58.01849 Y10.35967
G01 X58.03886 Y10.43955
G01 X58.05651 Y10.52629
G01 X58.06472 Y10.58001
G01 X58.07975 Y10.76038
G01 X58.08237 Y10.80465
G01 X58.07975 Y10.84895
G01 X58.06472 Y11.02932
G01 X58.05651 Y11.08304
G01 X58.03886 Y11.16978
G01 X58.01849 Y11.24966
G01 X58.00177 Y11.30046
G01 X57.97066 Y11.39492
G01 X57.94526 Y11.46277
G01 X57.93787 Y11.47714
G01 X57.84043 Y11.66228
G01 X57.82674 Y11.68448
G01 X57.77658 Y11.75751
G01 X57.70952 Y11.84554
G01 X57.62735 Y11.93937
G01 X57.56581 Y12.00305
G01 X57.55707 Y12.01125
G01 X57.38417 Y12.15253
G01 X57.38255 Y12.15385
G01 X57.30952 Y12.20031
G01 X57.18897 Y12.26911
G01 X57.13787 Y12.29383
G01 X57.10203 Y12.31113
G01 X57.02057 Y12.34570
G01 X56.98278 Y12.35959
G01 X56.88349 Y12.38857
G01 X56.79553 Y12.41423
G01 X56.76632 Y12.42223
G01 X56.70848 Y12.43094
G01 X56.54275 Y12.45047
G01 X56.47440 Y12.45382
G01 X56.38598 Y12.45382
G01 X56.31760 Y12.45047
G01 X56.15187 Y12.43094
G01 X56.09403 Y12.42223
G01 X56.06482 Y12.41423
G01 X55.87760 Y12.35959
G01 X55.83978 Y12.34570
G01 X55.75832 Y12.31113
G01 X55.67138 Y12.26909
G01 X55.55083 Y12.20031
G01 X55.47780 Y12.15385
G01 X55.47618 Y12.15253
G01 X55.30330 Y12.01128
G01 X55.29454 Y12.00305
G01 X55.23300 Y11.93937
G01 X55.15080 Y11.84552
G01 X55.08377 Y11.75751
G01 X55.03361 Y11.68448
G01 X55.01992 Y11.66228
G01 X54.92248 Y11.47714
G01 X54.91506 Y11.46277
G01 X54.88969 Y11.39492
G01 X54.84186 Y11.24969
G01 X54.82149 Y11.16978
G01 X54.80384 Y11.08304
G01 X54.79563 Y11.02932
G01 X54.78060 Y10.84895
G01 X54.77798 Y10.80468
G01 X54.78060 Y10.76038
G01 X54.79563 Y10.58004
G01 X54.80384 Y10.52629
G01 X54.82149 Y10.43955
G01 X54.84186 Y10.35967
G01 X54.88969 Y10.21443
G01 X54.91506 Y10.14659
G01 X54.92248 Y10.13221
G01 X55.01992 Y9.94707
G01 X55.03361 Y9.92487
G01 X55.08377 Y9.85185
G01 X55.15080 Y9.76381
G01 X55.23300 Y9.66998
G01 X55.29452 Y9.60633
G01 X55.30330 Y9.59808
G01 X55.47780 Y9.45548
G01 X55.55083 Y9.40902
G01 X55.67138 Y9.34022
G01 X55.75832 Y9.29820
G01 X55.79025 Y9.28352
G01 X55.83983 Y9.26361
G01 X55.87755 Y9.24977
G01 X56.06487 Y9.19511
G01 X56.09403 Y9.18713
G01 X56.15182 Y9.17842
G01 X56.31397 Y9.15929
G01 X56.31422 Y9.15927
G01 X56.31773 Y9.15886
G01 X56.38593 Y9.15551
G01 X56.47445 Y9.15551
G01 X56.54529 Y9.15899
G01 X56.65768 Y9.16300
G01 X56.71018 Y9.16165
G01 X56.72812 Y9.16137
G01 X56.80587 Y9.16087
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.57162 Y4.47482 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.57162 Y4.47482
G01 X48.49494 Y4.53499
G01 X48.43298 Y4.55559
G01 X48.35242 Y4.56816
G01 X48.28272 Y4.57314
G01 X48.18960 Y4.57091
G01 X48.09862 Y4.55112
G01 X48.04530 Y4.52829
G01 X48.04528 Y4.52829
G01 X48.01724 Y4.50667
G01 X47.96242 Y4.46128
G01 X47.86712 Y4.37027
G01 X47.86301 Y4.36570
G01 X47.80045 Y4.30317
G01 X47.74353 Y4.25155
G01 X47.58864 Y4.12862
G01 X47.55320 Y4.10190
G01 X47.51500 Y4.07942
G01 X47.34213 Y3.98336
G01 X47.27271 Y3.95051
G01 X47.19092 Y3.91666
G01 X47.11864 Y3.89077
G01 X46.92847 Y3.83647
G01 X46.88551 Y3.82534
G01 X46.84160 Y3.81920
G01 X46.64513 Y3.79659
G01 X46.56842 Y3.79283
G01 X46.47995 Y3.79283
G01 X46.40322 Y3.79659
G01 X46.20675 Y3.81920
G01 X46.16283 Y3.82534
G01 X46.11988 Y3.83647
G01 X45.92971 Y3.89077
G01 X45.86306 Y3.91462
G01 X45.85742 Y3.91663
G01 X45.77564 Y3.95051
G01 X45.70622 Y3.98336
G01 X45.53335 Y4.07942
G01 X45.49514 Y4.10190
G01 X45.45971 Y4.12862
G01 X45.30482 Y4.25155
G01 X45.24790 Y4.30317
G01 X45.18534 Y4.36570
G01 X45.18123 Y4.37027
G01 X45.11148 Y4.43934
G01 X45.07160 Y4.47482
G01 X44.99492 Y4.53499
G01 X44.93299 Y4.55559
G01 X44.85242 Y4.56816
G01 X44.78273 Y4.57314
G01 X44.68961 Y4.57091
G01 X44.59863 Y4.55112
G01 X44.54524 Y4.52826
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.77419 Y4.93418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.77419 Y4.93418
G01 X44.79863 Y4.87523
G01 X44.92799 Y4.63319
G01 X44.98135 Y4.55333
G01 X44.99906 Y4.53177
G01 X45.07160 Y4.47482
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.04530 Y4.52829 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.04530 Y4.52829
G01 X48.04853 Y4.53078
G01 X48.06702 Y4.55333
G01 X48.12039 Y4.63319
G01 X48.24975 Y4.87523
G01 X48.27418 Y4.93418
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.27418 Y7.04969 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.27418 Y7.04969
G01 X48.29862 Y7.10872
G01 X48.42798 Y7.35076
G01 X48.48135 Y7.43062
G01 X48.49994 Y7.45327
G01 X48.50306 Y7.45569
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.04932 Y7.45221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.04932 Y7.45221
G01 X48.06702 Y7.43062
G01 X48.12039 Y7.35076
G01 X48.24975 Y7.10872
G01 X48.27418 Y7.04969
G01 X48.27418 Y4.93418
G01 X48.29862 Y4.87523
G01 X48.42798 Y4.63319
G01 X48.48135 Y4.55333
G01 X48.49905 Y4.53177
G01 X48.57162 Y4.47482
G01 X48.61147 Y4.43934
G01 X48.68122 Y4.37027
G01 X48.68531 Y4.36573
G01 X48.74789 Y4.30317
G01 X48.80482 Y4.25155
G01 X48.95970 Y4.12862
G01 X48.99514 Y4.10190
G01 X49.03334 Y4.07942
G01 X49.20621 Y3.98336
G01 X49.27563 Y3.95051
G01 X49.35742 Y3.91663
G01 X49.36306 Y3.91462
G01 X49.42971 Y3.89077
G01 X49.61990 Y3.83647
G01 X49.66283 Y3.82534
G01 X49.70677 Y3.81920
G01 X49.90321 Y3.79659
G01 X49.97995 Y3.79283
G01 X50.06841 Y3.79283
G01 X50.14512 Y3.79659
G01 X50.34159 Y3.81920
G01 X50.38551 Y3.82534
G01 X50.42846 Y3.83647
G01 X50.61863 Y3.89077
G01 X50.69094 Y3.91666
G01 X50.77271 Y3.95051
G01 X50.84212 Y3.98336
G01 X51.01502 Y4.07942
G01 X51.05320 Y4.10190
G01 X51.08866 Y4.12864
G01 X51.24352 Y4.25158
G01 X51.30047 Y4.30317
G01 X51.36300 Y4.36570
G01 X51.41459 Y4.42262
G01 X51.53753 Y4.57751
G01 X51.56425 Y4.61295
G01 X51.58675 Y4.65120
G01 X51.68281 Y4.82407
G01 X51.71566 Y4.89349
G01 X51.74949 Y4.97520
G01 X51.77537 Y5.04751
G01 X51.82968 Y5.23768
G01 X51.84083 Y5.28066
G01 X51.84697 Y5.32458
G01 X51.86958 Y5.52105
G01 X51.87334 Y5.59775
G01 X51.87443 Y5.64198
G01 X51.87443 Y6.34197
G01 X51.87334 Y6.38622
G01 X51.86958 Y6.46293
G01 X51.84697 Y6.65940
G01 X51.84083 Y6.70331
G01 X51.82968 Y6.74629
G01 X51.77537 Y6.93646
G01 X51.74949 Y7.00877
G01 X51.71566 Y7.09049
G01 X51.68281 Y7.15993
G01 X51.58987 Y7.32716
G01 X51.58675 Y7.33278
G01 X51.56427 Y7.37100
G01 X51.53753 Y7.40646
G01 X51.41456 Y7.56135
G01 X51.36300 Y7.61827
G01 X51.30047 Y7.68081
G01 X51.24352 Y7.73242
G01 X51.08866 Y7.85533
G01 X51.05320 Y7.88208
G01 X51.01502 Y7.90456
G01 X50.84212 Y8.00062
G01 X50.77271 Y8.03346
G01 X50.69094 Y8.06732
G01 X50.61863 Y8.09320
G01 X50.42846 Y8.14751
G01 X50.38551 Y8.15863
G01 X50.34159 Y8.16478
G01 X50.14512 Y8.18739
G01 X50.06841 Y8.19114
G01 X49.97995 Y8.19114
G01 X49.90321 Y8.18739
G01 X49.70677 Y8.16478
G01 X49.66283 Y8.15863
G01 X49.61990 Y8.14751
G01 X49.42971 Y8.09320
G01 X49.35742 Y8.06735
G01 X49.27563 Y8.03346
G01 X49.20621 Y8.00062
G01 X49.03334 Y7.90456
G01 X48.99514 Y7.88208
G01 X48.95970 Y7.85536
G01 X48.80482 Y7.73242
G01 X48.74789 Y7.68081
G01 X48.68531 Y7.61825
G01 X48.68122 Y7.61370
G01 X48.58592 Y7.52269
G01 X48.53110 Y7.47730
G01 X48.50311 Y7.45571
G01 X48.50306 Y7.45569
G01 X48.44972 Y7.43285
G01 X48.35874 Y7.41307
G01 X48.26562 Y7.41083
G01 X48.19593 Y7.41581
G01 X48.11536 Y7.42838
G01 X48.05343 Y7.44898
G01 X47.97675 Y7.50915
G01 X47.93687 Y7.54464
G01 X47.86712 Y7.61370
G01 X47.86301 Y7.61827
G01 X47.80045 Y7.68081
G01 X47.74353 Y7.73242
G01 X47.58864 Y7.85536
G01 X47.55320 Y7.88208
G01 X47.51500 Y7.90456
G01 X47.34213 Y8.00062
G01 X47.27271 Y8.03346
G01 X47.19092 Y8.06732
G01 X47.11864 Y8.09320
G01 X46.92847 Y8.14751
G01 X46.88551 Y8.15863
G01 X46.84160 Y8.16478
G01 X46.64513 Y8.18739
G01 X46.56842 Y8.19114
G01 X46.47995 Y8.19114
G01 X46.40322 Y8.18739
G01 X46.20675 Y8.16478
G01 X46.16283 Y8.15863
G01 X46.11988 Y8.14751
G01 X45.92971 Y8.09320
G01 X45.85742 Y8.06732
G01 X45.77564 Y8.03346
G01 X45.70622 Y8.00062
G01 X45.53335 Y7.90456
G01 X45.49514 Y7.88208
G01 X45.45971 Y7.85536
G01 X45.30482 Y7.73242
G01 X45.24790 Y7.68081
G01 X45.18534 Y7.61827
G01 X45.18123 Y7.61370
G01 X45.08592 Y7.52269
G01 X45.03111 Y7.47730
G01 X45.00307 Y7.45569
G01 X44.99995 Y7.45327
G01 X44.98135 Y7.43062
G01 X44.92799 Y7.35076
G01 X44.79863 Y7.10872
G01 X44.77419 Y7.04972
G01 X44.77417 Y7.01622
G01 X44.77417 Y4.96776
G01 X44.77419 Y4.93418
G01 X44.74976 Y4.87523
G01 X44.62039 Y4.63319
G01 X44.56703 Y4.55333
G01 X44.54854 Y4.53080
G01 X44.54524 Y4.52826
G01 X44.51724 Y4.50667
G01 X44.46243 Y4.46128
G01 X44.36713 Y4.37027
G01 X44.36304 Y4.36573
G01 X44.30046 Y4.30317
G01 X44.24353 Y4.25155
G01 X44.08864 Y4.12862
G01 X44.05321 Y4.10190
G01 X44.01501 Y4.07942
G01 X43.84214 Y3.98336
G01 X43.77272 Y3.95051
G01 X43.69093 Y3.91663
G01 X43.61864 Y3.89077
G01 X43.42845 Y3.83647
G01 X43.38552 Y3.82534
G01 X43.34158 Y3.81920
G01 X43.14511 Y3.79659
G01 X43.06840 Y3.79283
G01 X42.97993 Y3.79283
G01 X42.90323 Y3.79659
G01 X42.70676 Y3.81920
G01 X42.66284 Y3.82534
G01 X42.61989 Y3.83647
G01 X42.42969 Y3.89080
G01 X42.36304 Y3.91462
G01 X42.35741 Y3.91663
G01 X42.27562 Y3.95051
G01 X42.20623 Y3.98333
G01 X42.03333 Y4.07942
G01 X41.99513 Y4.10190
G01 X41.95969 Y4.12864
G01 X41.80480 Y4.25158
G01 X41.74788 Y4.30317
G01 X41.68535 Y4.36570
G01 X41.63376 Y4.42260
G01 X41.51082 Y4.57751
G01 X41.48410 Y4.61295
G01 X41.46160 Y4.65120
G01 X41.36554 Y4.82407
G01 X41.33269 Y4.89349
G01 X41.29886 Y4.97520
G01 X41.27298 Y5.04751
G01 X41.21867 Y5.23768
G01 X41.20752 Y5.28066
G01 X41.20138 Y5.32458
G01 X41.17877 Y5.52105
G01 X41.17501 Y5.59775
G01 X41.17392 Y5.64198
G01 X41.17392 Y6.34197
G01 X41.17501 Y6.38622
G01 X41.17877 Y6.46293
G01 X41.20138 Y6.65940
G01 X41.20752 Y6.70331
G01 X41.21867 Y6.74629
G01 X41.27298 Y6.93646
G01 X41.29886 Y7.00877
G01 X41.33269 Y7.09049
G01 X41.36554 Y7.15990
G01 X41.46160 Y7.33278
G01 X41.48410 Y7.37103
G01 X41.51082 Y7.40646
G01 X41.63376 Y7.56138
G01 X41.68535 Y7.61827
G01 X41.74788 Y7.68081
G01 X41.80480 Y7.73240
G01 X41.95969 Y7.85533
G01 X41.99513 Y7.88208
G01 X42.03333 Y7.90456
G01 X42.20623 Y8.00062
G01 X42.27564 Y8.03346
G01 X42.35741 Y8.06732
G01 X42.42972 Y8.09320
G01 X42.61989 Y8.14751
G01 X42.66284 Y8.15863
G01 X42.70676 Y8.16478
G01 X42.90320 Y8.18739
G01 X42.97993 Y8.19114
G01 X43.06840 Y8.19114
G01 X43.14514 Y8.18739
G01 X43.34158 Y8.16478
G01 X43.38552 Y8.15863
G01 X43.42845 Y8.14751
G01 X43.61864 Y8.09320
G01 X43.69093 Y8.06735
G01 X43.77272 Y8.03346
G01 X43.84211 Y8.00062
G01 X44.01501 Y7.90456
G01 X44.05324 Y7.88205
G01 X44.08864 Y7.85536
G01 X44.24353 Y7.73242
G01 X44.30046 Y7.68081
G01 X44.36304 Y7.61825
G01 X44.36713 Y7.61370
G01 X44.43688 Y7.54464
G01 X44.47673 Y7.50915
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X45.00307 Y7.45569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X45.00307 Y7.45569
G01 X44.94973 Y7.43285
G01 X44.85875 Y7.41307
G01 X44.76563 Y7.41083
G01 X44.69593 Y7.41581
G01 X44.61536 Y7.42838
G01 X44.55341 Y7.44898
G01 X44.54935 Y7.45216
G01 X44.54932 Y7.45221
G01 X44.47673 Y7.50915
G01 X44.54935 Y7.45216
G01 X44.56703 Y7.43062
G01 X44.62039 Y7.35076
G01 X44.74976 Y7.10872
G01 X44.77419 Y7.04972
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.00994 Y10.73798 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.00994 Y10.73798
G01 X41.00994 Y12.73797
G01 X41.01105 Y12.78334
G01 X41.01304 Y12.80284
G01 X41.03866 Y12.89980
G01 X41.08151 Y12.98390
G01 X41.14090 Y13.05723
G01 X41.21428 Y13.11664
G01 X41.29835 Y13.15949
G01 X41.39538 Y13.18514
G01 X41.41491 Y13.18710
G01 X41.46018 Y13.18824
G01 X43.46020 Y13.18824
G01 X43.50538 Y13.18710
G01 X43.52499 Y13.18514
G01 X43.60117 Y13.16599
G01 X43.62192 Y13.15951
G01 X43.62296 Y13.15905
G01 X43.70607 Y13.11664
G01 X43.77943 Y13.05723
G01 X43.79426 Y13.04036
G01 X43.83881 Y12.98390
G01 X43.85994 Y12.94516
G01 X43.88169 Y12.89977
G01 X43.90731 Y12.80284
G01 X43.90930 Y12.78331
G01 X43.91041 Y12.73797
G01 X43.91041 Y10.73798
G01 X43.90930 Y10.69266
G01 X43.90731 Y10.67316
G01 X43.88169 Y10.57618
G01 X43.83884 Y10.49208
G01 X43.77943 Y10.41875
G01 X43.70610 Y10.35934
G01 X43.62200 Y10.31649
G01 X43.52494 Y10.29084
G01 X43.50544 Y10.28888
G01 X43.46020 Y10.28774
G01 X41.46018 Y10.28774
G01 X41.41491 Y10.28888
G01 X41.39541 Y10.29084
G01 X41.29838 Y10.31649
G01 X41.25492 Y10.33724
G01 X41.21425 Y10.35937
G01 X41.14092 Y10.41872
G01 X41.08151 Y10.49211
G01 X41.03866 Y10.57623
G01 X41.01304 Y10.67316
G01 X41.01105 Y10.69266
G01 X41.00994 Y10.73798
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.20013 Y15.14861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.20013 Y15.14861
G01 X42.31176 Y15.26022
G01 X42.41217 Y15.25034
G01 X42.50821 Y15.25034
G01 X42.60861 Y15.26022
G01 X42.72022 Y15.14861
G01 X42.57028 Y15.12801
G01 X42.35007 Y15.12801
G01 X42.20013 Y15.14861
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.84641 Y16.73799 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.84641 Y16.73799
G01 X40.86145 Y16.51828
G01 X40.86998 Y16.47716
G01 X40.98243 Y16.58963
G01 X40.97255 Y16.68996
G01 X40.97255 Y16.78605
G01 X40.98243 Y16.88638
G01 X40.86998 Y16.99882
G01 X40.86145 Y16.95775
G01 X40.84641 Y16.73799
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.93795 Y16.58960 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.93795 Y16.58960
G01 X44.05037 Y16.47716
G01 X44.05890 Y16.51823
G01 X44.07394 Y16.73799
G01 X44.05890 Y16.95778
G01 X44.05037 Y16.99882
G01 X43.93795 Y16.88643
G01 X43.94783 Y16.78605
G01 X43.94783 Y16.68996
G01 X43.93795 Y16.58960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.20013 Y18.32740 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.20013 Y18.32740
G01 X42.35004 Y18.34802
G01 X42.57031 Y18.34802
G01 X42.72022 Y18.32740
G01 X42.60856 Y18.21574
G01 X42.50821 Y18.22562
G01 X42.41217 Y18.22562
G01 X42.31181 Y18.21574
G01 X42.20013 Y18.32740
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.86018 Y20.36056 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.86018 Y20.36056
G01 X40.86018 Y20.50235
G01 X41.04009 Y20.59851
G01 X41.11994 Y20.65188
G01 X41.36241 Y20.85086
G01 X41.43033 Y20.91878
G01 X41.62932 Y21.16125
G01 X41.68268 Y21.24111
G01 X41.77885 Y21.42101
G01 X41.92063 Y21.42101
G01 X41.88062 Y21.33211
G01 X41.74229 Y21.10329
G01 X41.57740 Y20.89282
G01 X41.38837 Y20.70379
G01 X41.17791 Y20.53892
G01 X40.94908 Y20.40057
G01 X40.86018 Y20.36056
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.86018 Y24.21966 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.86018 Y24.21966
G01 X41.04009 Y24.12350
G01 X41.11994 Y24.07013
G01 X41.36241 Y23.87115
G01 X41.43033 Y23.80323
G01 X41.62932 Y23.56079
G01 X41.68268 Y23.48090
G01 X41.77885 Y23.30102
G01 X41.92063 Y23.30102
G01 X41.88062 Y23.38995
G01 X41.74229 Y23.61875
G01 X41.57740 Y23.82921
G01 X41.38837 Y24.01824
G01 X41.17791 Y24.18314
G01 X40.94908 Y24.32147
G01 X40.86018 Y24.36147
G01 X40.86018 Y24.21966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.91972 Y23.30102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.91972 Y23.30102
G01 X38.06153 Y23.30102
G01 X38.15769 Y23.48090
G01 X38.21106 Y23.56079
G01 X38.41004 Y23.80323
G01 X38.47796 Y23.87115
G01 X38.72043 Y24.07013
G01 X38.80029 Y24.12350
G01 X38.98017 Y24.21966
G01 X38.98017 Y24.36147
G01 X38.89127 Y24.32147
G01 X38.66244 Y24.18314
G01 X38.45198 Y24.01824
G01 X38.26295 Y23.82921
G01 X38.09805 Y23.61875
G01 X37.95973 Y23.38995
G01 X37.91972 Y23.30102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.91972 Y21.42101 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.91972 Y21.42101
G01 X38.06153 Y21.42101
G01 X38.15769 Y21.24111
G01 X38.21106 Y21.16125
G01 X38.41004 Y20.91878
G01 X38.47796 Y20.85086
G01 X38.72043 Y20.65188
G01 X38.80029 Y20.59851
G01 X38.98017 Y20.50237
G01 X38.98017 Y20.36056
G01 X38.89127 Y20.40059
G01 X38.66244 Y20.53892
G01 X38.45198 Y20.70379
G01 X38.26295 Y20.89282
G01 X38.09805 Y21.10329
G01 X37.95973 Y21.33211
G01 X37.91972 Y21.42101
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.36401 Y24.09698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.36401 Y24.09698
G01 X31.36647 Y24.05268
G01 X31.38260 Y23.85273
G01 X31.39599 Y23.76013
G01 X31.41290 Y23.67328
G01 X31.42357 Y23.62998
G01 X31.42796 Y23.61217
G01 X31.49726 Y23.39157
G01 X31.50147 Y23.37849
G01 X31.53228 Y23.31016
G01 X31.60858 Y23.15822
G01 X31.67114 Y23.05101
G01 X31.71945 Y22.97681
G01 X31.73838 Y22.95068
G01 X31.89423 Y22.76152
G01 X31.90569 Y22.74926
G01 X31.96929 Y22.68764
G01 X32.01760 Y22.64522
G01 X32.07409 Y22.59559
G01 X32.19654 Y22.50100
G01 X32.26931 Y22.45030
G01 X32.27061 Y22.44946
G01 X32.48598 Y22.33272
G01 X32.52918 Y22.31271
G01 X32.61117 Y22.27948
G01 X32.71397 Y22.24362
G01 X32.78336 Y22.22419
G01 X32.89243 Y22.19366
G01 X32.95036 Y22.17948
G01 X32.97924 Y22.17578
G01 X33.19380 Y22.15167
G01 X33.27198 Y22.14784
G01 X33.36040 Y22.14784
G01 X33.43853 Y22.15167
G01 X33.48978 Y22.15741
G01 X33.65311 Y22.17578
G01 X33.68199 Y22.17948
G01 X33.73992 Y22.19366
G01 X33.91838 Y22.24362
G01 X34.02118 Y22.27948
G01 X34.10317 Y22.31271
G01 X34.14637 Y22.33272
G01 X34.36171 Y22.44946
G01 X34.36306 Y22.45030
G01 X34.43581 Y22.50100
G01 X34.55823 Y22.59559
G01 X34.66304 Y22.68764
G01 X34.72664 Y22.74928
G01 X34.73819 Y22.76163
G01 X34.89397 Y22.95068
G01 X34.91289 Y22.97681
G01 X34.96121 Y23.05101
G01 X35.02377 Y23.15822
G01 X35.10007 Y23.31016
G01 X35.13088 Y23.37849
G01 X35.13509 Y23.39157
G01 X35.20441 Y23.61220
G01 X35.21945 Y23.67328
G01 X35.23636 Y23.76013
G01 X35.24975 Y23.85271
G01 X35.26588 Y24.05268
G01 X35.26834 Y24.09698
G01 X35.26588 Y24.14130
G01 X35.24975 Y24.34125
G01 X35.23636 Y24.43386
G01 X35.21945 Y24.52073
G01 X35.20441 Y24.58176
G01 X35.13509 Y24.80241
G01 X35.13088 Y24.81547
G01 X35.10007 Y24.88377
G01 X35.02377 Y25.03576
G01 X34.96121 Y25.14298
G01 X34.91289 Y25.21717
G01 X34.89400 Y25.24328
G01 X34.73822 Y25.43233
G01 X34.73090 Y25.44013
G01 X34.72664 Y25.44470
G01 X34.66304 Y25.50638
G01 X34.55821 Y25.59840
G01 X34.43578 Y25.69299
G01 X34.36309 Y25.74364
G01 X34.36171 Y25.74450
G01 X34.14635 Y25.86126
G01 X34.10319 Y25.88125
G01 X34.02113 Y25.91450
G01 X33.91838 Y25.95037
G01 X33.73990 Y26.00030
G01 X33.68193 Y26.01448
G01 X33.65316 Y26.01819
G01 X33.43855 Y26.04232
G01 X33.36045 Y26.04615
G01 X33.27195 Y26.04615
G01 X33.19377 Y26.04232
G01 X32.97919 Y26.01819
G01 X32.95041 Y26.01448
G01 X32.89245 Y26.00030
G01 X32.71397 Y25.95037
G01 X32.61122 Y25.91450
G01 X32.52916 Y25.88125
G01 X32.48598 Y25.86126
G01 X32.27061 Y25.74450
G01 X32.26926 Y25.74366
G01 X32.19657 Y25.69299
G01 X32.07411 Y25.59837
G01 X31.96931 Y25.50638
G01 X31.90571 Y25.44470
G01 X31.89416 Y25.43236
G01 X31.73840 Y25.24333
G01 X31.71945 Y25.21717
G01 X31.67114 Y25.14298
G01 X31.60858 Y25.03574
G01 X31.53228 Y24.88377
G01 X31.50147 Y24.81547
G01 X31.49726 Y24.80241
G01 X31.42794 Y24.58179
G01 X31.41290 Y24.52073
G01 X31.39599 Y24.43386
G01 X31.38260 Y24.34125
G01 X31.36647 Y24.14130
G01 X31.36401 Y24.09698
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.09945 Y29.22994 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.09945 Y29.22994
G01 X25.78805 Y29.06349
G01 X25.69930 Y29.02674
G01 X25.34289 Y28.91861
G01 X25.24868 Y28.89989
G01 X25.16608 Y28.89174
G01 X25.16727 Y28.89156
G01 X25.23019 Y28.86639
G01 X25.30852 Y28.81605
G01 X25.37593 Y28.75178
G01 X25.42170 Y28.69898
G01 X25.47578 Y28.62306
G01 X25.51449 Y28.53827
G01 X25.53646 Y28.44767
G01 X25.54639 Y28.37851
G01 X25.54921 Y28.28493
G01 X25.49729 Y28.17073
G01 X25.48127 Y28.13329
G01 X25.46953 Y28.10408
G01 X25.44080 Y27.99779
G01 X25.43885 Y27.97828
G01 X25.43770 Y27.93302
G01 X25.43770 Y25.93304
G01 X25.43885 Y25.88778
G01 X25.44080 Y25.86825
G01 X25.45040 Y25.82662
G01 X25.46648 Y25.77115
G01 X25.50931 Y25.68715
G01 X25.51568 Y25.67849
G01 X25.56872 Y25.61377
G01 X25.63702 Y25.55806
G01 X25.64205 Y25.55438
G01 X25.68279 Y25.53223
G01 X25.72615 Y25.51153
G01 X25.82315 Y25.48588
G01 X25.84271 Y25.48392
G01 X25.88797 Y25.48278
G01 X27.88797 Y25.48278
G01 X27.93320 Y25.48392
G01 X27.95276 Y25.48588
G01 X28.04974 Y25.51153
G01 X28.13386 Y25.55438
G01 X28.20722 Y25.61379
G01 X28.26660 Y25.68712
G01 X28.30945 Y25.77122
G01 X28.33511 Y25.86825
G01 X28.33706 Y25.88778
G01 X28.33821 Y25.93304
G01 X28.33821 Y27.93302
G01 X28.33706 Y27.97823
G01 X28.33544 Y27.99469
G01 X28.33511 Y27.99784
G01 X28.30943 Y28.09484
G01 X28.26688 Y28.17843
G01 X28.26665 Y28.17886
G01 X28.26023 Y28.18757
G01 X28.20719 Y28.25229
G01 X28.13447 Y28.31122
G01 X28.13386 Y28.31168
G01 X28.05091 Y28.35402
G01 X28.04981 Y28.35450
G01 X28.00780 Y28.36703
G01 X27.95274 Y28.38018
G01 X27.93320 Y28.38214
G01 X27.88797 Y28.38328
G01 X26.64451 Y28.38328
G01 X26.51502 Y28.39260
G01 X26.44517 Y28.40264
G01 X26.37730 Y28.42301
G01 X26.31606 Y28.44140
G01 X26.27456 Y28.46809
G01 X26.20712 Y28.53238
G01 X26.16138 Y28.58519
G01 X26.10740 Y28.66103
G01 X26.06872 Y28.74571
G01 X26.04675 Y28.83619
G01 X26.03679 Y28.90533
G01 X26.03234 Y28.99839
G01 X26.04560 Y29.09065
G01 X26.07606 Y29.17871
G01 X26.09945 Y29.22994
G01 X26.10925 Y29.24038
G01 X26.11345 Y29.24480
G01 X26.17895 Y29.31373
G01 X26.23521 Y29.36809
G01 X26.25223 Y29.38320
G01 X26.28373 Y29.40990
G01 X26.39490 Y29.49984
G01 X26.45980 Y29.55864
G01 X26.52234 Y29.62118
G01 X26.58114 Y29.68605
G01 X26.74685 Y29.89090
G01 X26.75947 Y29.90840
G01 X26.80765 Y29.98277
G01 X26.88467 Y30.11543
G01 X26.98390 Y30.31091
G01 X27.00300 Y30.35092
G01 X27.01779 Y30.39273
G01 X27.08583 Y30.60113
G01 X27.12520 Y30.74937
G01 X27.14370 Y30.83598
G01 X27.14715 Y30.85732
G01 X27.17481 Y31.11932
G01 X27.17913 Y31.20677
G01 X27.17913 Y31.29529
G01 X27.17481 Y31.38272
G01 X27.14715 Y31.64472
G01 X27.14370 Y31.66605
G01 X27.12520 Y31.75267
G01 X27.08583 Y31.90093
G01 X27.01779 Y32.10933
G01 X27.00300 Y32.15112
G01 X26.98390 Y32.19117
G01 X26.88467 Y32.38663
G01 X26.80765 Y32.51929
G01 X26.75947 Y32.59361
G01 X26.74687 Y32.61114
G01 X26.58114 Y32.81599
G01 X26.52234 Y32.88086
G01 X26.45977 Y32.94342
G01 X26.39490 Y33.00222
G01 X26.19008 Y33.16793
G01 X26.17255 Y33.18055
G01 X26.09823 Y33.22871
G01 X25.96554 Y33.30575
G01 X25.77009 Y33.40499
G01 X25.73006 Y33.42409
G01 X25.68825 Y33.43887
G01 X25.47987 Y33.50692
G01 X25.33161 Y33.54626
G01 X25.24497 Y33.56475
G01 X25.22363 Y33.56823
G01 X24.96163 Y33.59589
G01 X24.87418 Y33.60019
G01 X24.82996 Y33.60128
G01 X23.32996 Y33.60128
G01 X23.28571 Y33.60019
G01 X23.19826 Y33.59589
G01 X22.93624 Y33.56823
G01 X22.91495 Y33.56478
G01 X22.82831 Y33.54626
G01 X22.68003 Y33.50692
G01 X22.47164 Y33.43887
G01 X22.42986 Y33.42409
G01 X22.38978 Y33.40496
G01 X22.19435 Y33.30575
G01 X22.06166 Y33.22871
G01 X21.98739 Y33.18055
G01 X21.96984 Y33.16793
G01 X21.76499 Y33.00222
G01 X21.70014 Y32.94344
G01 X21.63753 Y32.88083
G01 X21.57876 Y32.81599
G01 X21.41305 Y32.61114
G01 X21.40043 Y32.59359
G01 X21.35227 Y32.51932
G01 X21.27525 Y32.38663
G01 X21.17602 Y32.19120
G01 X21.15689 Y32.15112
G01 X21.14211 Y32.10933
G01 X21.07406 Y31.90093
G01 X21.03472 Y31.75267
G01 X21.01622 Y31.66603
G01 X21.01274 Y31.64472
G01 X20.98508 Y31.38272
G01 X20.98079 Y31.29526
G01 X20.98079 Y31.20680
G01 X20.98508 Y31.11934
G01 X21.01274 Y30.85734
G01 X21.01622 Y30.83601
G01 X21.03472 Y30.74937
G01 X21.07406 Y30.60111
G01 X21.14211 Y30.39273
G01 X21.15689 Y30.35092
G01 X21.17602 Y30.31089
G01 X21.27528 Y30.11538
G01 X21.28358 Y30.10106
G01 X21.35227 Y29.98274
G01 X21.40043 Y29.90842
G01 X21.41305 Y29.89090
G01 X21.57876 Y29.68607
G01 X21.63756 Y29.62120
G01 X21.70012 Y29.55864
G01 X21.76499 Y29.49984
G01 X21.96984 Y29.33410
G01 X21.98737 Y29.32151
G01 X22.06169 Y29.27332
G01 X22.19435 Y29.19631
G01 X22.31170 Y29.13675
G01 X22.38981 Y29.09707
G01 X22.42986 Y29.07797
G01 X22.47164 Y29.06319
G01 X22.68005 Y28.99514
G01 X22.82831 Y28.95577
G01 X22.91495 Y28.93728
G01 X22.93626 Y28.93383
G01 X23.19826 Y28.90617
G01 X23.28571 Y28.90187
G01 X23.32996 Y28.90078
G01 X24.82996 Y28.90078
G01 X24.87418 Y28.90187
G01 X24.93865 Y28.90502
G01 X25.07121 Y28.90200
G01 X25.14207 Y28.89532
G01 X25.16608 Y28.89174
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.49729 Y28.17073 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.49729 Y28.17073
G01 X25.54990 Y28.28638
G01 X25.61573 Y28.34043
G01 X25.70044 Y28.38572
G01 X25.79236 Y28.41361
G01 X25.88797 Y28.42301
G01 X26.37733 Y28.42301
G01 X26.44517 Y28.40264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.36401 Y17.09699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.36401 Y17.09699
G01 X31.36647 Y17.05267
G01 X31.38260 Y16.85277
G01 X31.39599 Y16.76011
G01 X31.40056 Y16.73159
G01 X31.41290 Y16.67325
G01 X31.42113 Y16.63990
G01 X31.42796 Y16.61213
G01 X31.49726 Y16.39159
G01 X31.50147 Y16.37850
G01 X31.53228 Y16.31023
G01 X31.60858 Y16.15824
G01 X31.67114 Y16.05102
G01 X31.71945 Y15.97680
G01 X31.73838 Y15.95067
G01 X31.85044 Y15.81465
G01 X31.89413 Y15.76167
G01 X31.90571 Y15.74927
G01 X31.96934 Y15.68760
G01 X32.07411 Y15.59560
G01 X32.19657 Y15.50101
G01 X32.26926 Y15.45034
G01 X32.27063 Y15.44950
G01 X32.48598 Y15.33271
G01 X32.52916 Y15.31272
G01 X32.61122 Y15.27947
G01 X32.71394 Y15.24363
G01 X32.73797 Y15.23690
G01 X32.89245 Y15.19370
G01 X32.95039 Y15.17950
G01 X32.97919 Y15.17579
G01 X33.19380 Y15.15166
G01 X33.27195 Y15.14785
G01 X33.36045 Y15.14785
G01 X33.43853 Y15.15166
G01 X33.65316 Y15.17579
G01 X33.68196 Y15.17950
G01 X33.73990 Y15.19370
G01 X33.91838 Y15.24361
G01 X34.02113 Y15.27947
G01 X34.10319 Y15.31272
G01 X34.14635 Y15.33271
G01 X34.20937 Y15.36687
G01 X34.36169 Y15.44950
G01 X34.36309 Y15.45034
G01 X34.43578 Y15.50101
G01 X34.55826 Y15.59563
G01 X34.66301 Y15.68760
G01 X34.72664 Y15.74927
G01 X34.73822 Y15.76167
G01 X34.89397 Y15.95067
G01 X34.91289 Y15.97680
G01 X34.96121 Y16.05102
G01 X35.02377 Y16.15824
G01 X35.10007 Y16.31023
G01 X35.13088 Y16.37850
G01 X35.13509 Y16.39159
G01 X35.20439 Y16.61221
G01 X35.21945 Y16.67325
G01 X35.23636 Y16.76011
G01 X35.24546 Y16.82308
G01 X35.24975 Y16.85275
G01 X35.26588 Y17.05267
G01 X35.26834 Y17.09699
G01 X35.26588 Y17.14129
G01 X35.24975 Y17.34124
G01 X35.23636 Y17.43387
G01 X35.21945 Y17.52072
G01 X35.20441 Y17.58180
G01 X35.13509 Y17.80240
G01 X35.13085 Y17.81561
G01 X35.10007 Y17.88381
G01 X35.04713 Y17.98919
G01 X35.02374 Y18.03578
G01 X35.00012 Y18.07629
G01 X34.96121 Y18.14297
G01 X34.91289 Y18.21716
G01 X34.89400 Y18.24330
G01 X34.73814 Y18.43245
G01 X34.72666 Y18.44472
G01 X34.69466 Y18.47723
G01 X34.66306 Y18.50636
G01 X34.55826 Y18.59836
G01 X34.43581 Y18.69298
G01 X34.36306 Y18.74368
G01 X34.36171 Y18.74451
G01 X34.14637 Y18.86128
G01 X34.10317 Y18.88129
G01 X34.02118 Y18.91449
G01 X33.91838 Y18.95038
G01 X33.73992 Y19.00032
G01 X33.68193 Y19.01449
G01 X33.65311 Y19.01820
G01 X33.43855 Y19.04230
G01 X33.36040 Y19.04614
G01 X33.27198 Y19.04614
G01 X33.19377 Y19.04230
G01 X32.97924 Y19.01820
G01 X32.95041 Y19.01449
G01 X32.89243 Y19.00032
G01 X32.71397 Y18.95038
G01 X32.61117 Y18.91449
G01 X32.52918 Y18.88129
G01 X32.48600 Y18.86128
G01 X32.27061 Y18.74449
G01 X32.26931 Y18.74368
G01 X32.19654 Y18.69298
G01 X32.07411 Y18.59839
G01 X31.96931 Y18.50636
G01 X31.90571 Y18.44472
G01 X31.89416 Y18.43235
G01 X31.73838 Y18.24330
G01 X31.71945 Y18.21716
G01 X31.67114 Y18.14297
G01 X31.60858 Y18.03575
G01 X31.53228 Y17.88381
G01 X31.50147 Y17.81548
G01 X31.49726 Y17.80240
G01 X31.42794 Y17.58180
G01 X31.41290 Y17.52072
G01 X31.39599 Y17.43387
G01 X31.38260 Y17.34124
G01 X31.36647 Y17.14129
G01 X31.36401 Y17.09699
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.52194 Y17.35102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.52194 Y17.35102
G01 X22.52305 Y17.30573
G01 X22.52504 Y17.28620
G01 X22.55064 Y17.18930
G01 X22.59354 Y17.10512
G01 X22.65290 Y17.03179
G01 X22.72242 Y16.97520
G01 X22.72628 Y16.97238
G01 X22.75552 Y16.95620
G01 X22.81038 Y16.92953
G01 X22.90741 Y16.90388
G01 X22.92691 Y16.90192
G01 X22.97218 Y16.90080
G01 X25.37220 Y16.90080
G01 X25.41744 Y16.90192
G01 X25.43694 Y16.90388
G01 X25.53394 Y16.92953
G01 X25.61817 Y16.97246
G01 X25.69145 Y17.03179
G01 X25.75084 Y17.10512
G01 X25.79369 Y17.18922
G01 X25.80120 Y17.21358
G01 X25.81931 Y17.28620
G01 X25.82129 Y17.30573
G01 X25.82244 Y17.35102
G01 X25.82244 Y19.75104
G01 X25.82129 Y19.79635
G01 X25.81931 Y19.81586
G01 X25.79369 Y19.91284
G01 X25.75084 Y19.99691
G01 X25.69142 Y20.07027
G01 X25.63887 Y20.11411
G01 X25.61804 Y20.12970
G01 X25.53514 Y20.17202
G01 X25.53400 Y20.17250
G01 X25.43697 Y20.19818
G01 X25.41738 Y20.20014
G01 X25.37220 Y20.20128
G01 X22.97218 Y20.20128
G01 X22.92691 Y20.20014
G01 X22.90741 Y20.19818
G01 X22.81035 Y20.17253
G01 X22.72625 Y20.12968
G01 X22.65292 Y20.07027
G01 X22.59351 Y19.99694
G01 X22.55066 Y19.91284
G01 X22.52504 Y19.81586
G01 X22.52305 Y19.79635
G01 X22.52194 Y19.75104
G01 X22.52194 Y17.35102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.32796 Y18.22460 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.32796 Y18.22460
G01 X18.43200 Y18.12054
G01 X18.47054 Y18.31429
G01 X18.48605 Y18.55102
G01 X18.47054 Y18.78780
G01 X18.43200 Y18.98152
G01 X18.32796 Y18.87746
G01 X18.33678 Y18.83319
G01 X18.35982 Y18.59905
G01 X18.35982 Y18.50299
G01 X18.33678 Y18.26887
G01 X18.32796 Y18.22460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.24169 Y16.79120 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.24169 Y16.79120
G01 X16.43544 Y16.75267
G01 X16.67214 Y16.73713
G01 X16.90889 Y16.75267
G01 X17.10264 Y16.79120
G01 X16.99861 Y16.89524
G01 X16.95433 Y16.88643
G01 X16.72022 Y16.86337
G01 X16.62416 Y16.86337
G01 X16.39002 Y16.88643
G01 X16.34575 Y16.89524
G01 X16.24169 Y16.79120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.85827 Y18.55102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.85827 Y18.55102
G01 X14.87382 Y18.78777
G01 X14.91233 Y18.98152
G01 X15.01639 Y18.87743
G01 X15.00760 Y18.83319
G01 X14.98454 Y18.59905
G01 X14.98454 Y18.50299
G01 X15.00760 Y18.26887
G01 X15.01639 Y18.22460
G01 X14.91233 Y18.12054
G01 X14.87382 Y18.31429
G01 X14.85827 Y18.55102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.24169 Y20.31086 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.24169 Y20.31086
G01 X16.43539 Y20.34939
G01 X16.67214 Y20.36491
G01 X16.90889 Y20.34939
G01 X17.10264 Y20.31086
G01 X16.99858 Y20.20679
G01 X16.95433 Y20.21561
G01 X16.72022 Y20.23864
G01 X16.62416 Y20.23864
G01 X16.39002 Y20.21561
G01 X16.34577 Y20.20679
G01 X16.24169 Y20.31086
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.88078 Y25.99301 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.88078 Y25.99301
G01 X13.03811 Y25.99301
G01 X13.10209 Y25.91506
G01 X13.17001 Y25.84714
G01 X13.24794 Y25.78316
G01 X13.24794 Y25.62225
G01 X13.08650 Y25.75362
G01 X12.93615 Y25.91460
G01 X12.88078 Y25.99301
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.91708 Y29.25663 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.91708 Y29.25663
G01 X13.91891 Y29.25465
G01 X13.92744 Y29.23967
G01 X13.95731 Y29.15140
G01 X13.96993 Y29.05910
G01 X13.97278 Y28.98927
G01 X13.96770 Y28.89626
G01 X13.94512 Y28.80591
G01 X13.90588 Y28.72146
G01 X13.87054 Y28.66121
G01 X13.80323 Y28.57172
G01 X13.71736 Y28.49984
G01 X13.68180 Y28.47642
G01 X13.60750 Y28.43621
G01 X13.44553 Y28.36586
G01 X13.25734 Y28.25143
G01 X13.08650 Y28.11242
G01 X12.93615 Y27.95143
G01 X12.88078 Y27.87302
G01 X13.03811 Y27.87302
G01 X13.10209 Y27.95097
G01 X13.17001 Y28.01889
G01 X13.32155 Y28.14325
G01 X13.40141 Y28.19662
G01 X13.57430 Y28.28902
G01 X13.66305 Y28.32580
G01 X13.85063 Y28.38270
G01 X13.94484 Y28.40144
G01 X14.13994 Y28.42064
G01 X14.23600 Y28.42064
G01 X14.43110 Y28.40144
G01 X14.52531 Y28.38270
G01 X14.71288 Y28.32580
G01 X14.80163 Y28.28902
G01 X14.97453 Y28.19662
G01 X15.05439 Y28.14325
G01 X15.20592 Y28.01889
G01 X15.27384 Y27.95097
G01 X15.33783 Y27.87302
G01 X15.49513 Y27.87302
G01 X15.42495 Y27.97246
G01 X15.36158 Y28.09667
G01 X15.33899 Y28.16278
G01 X15.31738 Y28.25344
G01 X15.31334 Y28.34653
G01 X15.32701 Y28.43873
G01 X15.34377 Y28.50655
G01 X15.37458 Y28.59438
G01 X15.42147 Y28.67482
G01 X15.48271 Y28.74493
G01 X15.53346 Y28.79293
G01 X15.60011 Y28.84582
G01 X15.65888 Y28.86100
G01 X15.65896 Y28.86100
G01 X15.76175 Y28.88757
G01 X15.81974 Y28.89446
G01 X15.92657 Y28.90078
G01 X16.92997 Y28.90078
G01 X16.97420 Y28.90187
G01 X17.06165 Y28.90617
G01 X17.32365 Y28.93383
G01 X17.34496 Y28.93728
G01 X17.43160 Y28.95577
G01 X17.57983 Y28.99514
G01 X17.78827 Y29.06319
G01 X17.83000 Y29.07797
G01 X17.87010 Y29.09707
G01 X18.06553 Y29.19631
G01 X18.19820 Y29.27332
G01 X18.27254 Y29.32151
G01 X18.29004 Y29.33410
G01 X18.49492 Y29.49987
G01 X18.55979 Y29.55864
G01 X18.62235 Y29.62120
G01 X18.68115 Y29.68605
G01 X18.84681 Y29.89090
G01 X18.85946 Y29.90842
G01 X18.90764 Y29.98274
G01 X18.98463 Y30.11543
G01 X19.08389 Y30.31089
G01 X19.10300 Y30.35089
G01 X19.11778 Y30.39273
G01 X19.18582 Y30.60111
G01 X19.22519 Y30.74937
G01 X19.24366 Y30.83601
G01 X19.24717 Y30.85734
G01 X19.27483 Y31.11934
G01 X19.27912 Y31.20680
G01 X19.27912 Y31.29526
G01 X19.27483 Y31.38272
G01 X19.24717 Y31.64469
G01 X19.24366 Y31.66603
G01 X19.22519 Y31.75267
G01 X19.18582 Y31.90095
G01 X19.11778 Y32.10933
G01 X19.10300 Y32.15114
G01 X19.08389 Y32.19120
G01 X18.98463 Y32.38663
G01 X18.90764 Y32.51929
G01 X18.85949 Y32.59359
G01 X18.84681 Y32.61114
G01 X18.68115 Y32.81599
G01 X18.62238 Y32.88083
G01 X18.55977 Y32.94344
G01 X18.49492 Y33.00222
G01 X18.29004 Y33.16793
G01 X18.27252 Y33.18055
G01 X18.19825 Y33.22871
G01 X18.06553 Y33.30575
G01 X17.87013 Y33.40496
G01 X17.83000 Y33.42409
G01 X17.78827 Y33.43887
G01 X17.57988 Y33.50692
G01 X17.43160 Y33.54626
G01 X17.34496 Y33.56475
G01 X17.32365 Y33.56823
G01 X17.06165 Y33.59589
G01 X16.97420 Y33.60019
G01 X16.92997 Y33.60128
G01 X15.22998 Y33.60128
G01 X15.18573 Y33.60019
G01 X15.09828 Y33.59589
G01 X14.83625 Y33.56823
G01 X14.81494 Y33.56475
G01 X14.72830 Y33.54626
G01 X14.58004 Y33.50692
G01 X14.37166 Y33.43887
G01 X14.32985 Y33.42409
G01 X14.28982 Y33.40499
G01 X14.09437 Y33.30575
G01 X13.96168 Y33.22871
G01 X13.88736 Y33.18055
G01 X13.86983 Y33.16793
G01 X13.66501 Y33.00222
G01 X13.60014 Y32.94342
G01 X13.53758 Y32.88086
G01 X13.47877 Y32.81599
G01 X13.31304 Y32.61114
G01 X13.30042 Y32.59361
G01 X13.25226 Y32.51932
G01 X13.17524 Y32.38663
G01 X13.07601 Y32.19120
G01 X13.05688 Y32.15114
G01 X13.04210 Y32.10931
G01 X12.97408 Y31.90093
G01 X12.93471 Y31.75264
G01 X12.91622 Y31.66605
G01 X12.91276 Y31.64472
G01 X12.88510 Y31.38272
G01 X12.88078 Y31.29529
G01 X12.88078 Y31.20677
G01 X12.88510 Y31.11934
G01 X12.91276 Y30.85734
G01 X12.91622 Y30.83598
G01 X12.93471 Y30.74939
G01 X12.97408 Y30.60111
G01 X13.04210 Y30.39275
G01 X13.05691 Y30.35092
G01 X13.07601 Y30.31089
G01 X13.17527 Y30.11538
G01 X13.18358 Y30.10108
G01 X13.25226 Y29.98274
G01 X13.30044 Y29.90840
G01 X13.31304 Y29.89090
G01 X13.43326 Y29.74233
G01 X13.47880 Y29.68605
G01 X13.53758 Y29.62118
G01 X13.60011 Y29.55864
G01 X13.66501 Y29.49984
G01 X13.72399 Y29.45211
G01 X13.81964 Y29.36265
G01 X13.86757 Y29.31097
G01 X13.87344 Y29.30456
G01 X13.91708 Y29.25666
G01 X13.91708 Y29.25663
G01 X13.94339 Y29.23908
G01 X14.27189 Y29.06349
G01 X14.36064 Y29.02674
G01 X14.71705 Y28.91861
G01 X14.81123 Y28.89989
G01 X15.06391 Y28.87500
G01 X15.18195 Y28.86337
G01 X15.22998 Y28.86100
G01 X15.65888 Y28.86100
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.12797 Y25.62228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.12797 Y25.62228
G01 X15.28941 Y25.75362
G01 X15.43973 Y25.91460
G01 X15.49513 Y25.99301
G01 X15.33783 Y25.99301
G01 X15.27384 Y25.91506
G01 X15.20592 Y25.84714
G01 X15.12797 Y25.78316
G01 X15.12797 Y25.62228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.12618 Y17.75699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.12618 Y17.75699
G01 X10.12618 Y17.87698
G01 X11.00184 Y17.87698
G01 X11.12275 Y17.85069
G01 X11.22983 Y17.80482
G01 X11.32633 Y17.73951
G01 X11.40870 Y17.65714
G01 X11.47400 Y17.56067
G01 X11.51983 Y17.45358
G01 X11.54616 Y17.33253
G01 X11.54616 Y16.45699
G01 X11.42618 Y16.45699
G01 X11.42618 Y17.26700
G01 X11.41678 Y17.36258
G01 X11.38889 Y17.45452
G01 X11.34360 Y17.53921
G01 X11.28267 Y17.61345
G01 X11.20842 Y17.67439
G01 X11.12371 Y17.71970
G01 X11.03179 Y17.74756
G01 X10.93618 Y17.75699
G01 X10.12618 Y17.75699
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.40569 Y22.49797 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.40569 Y22.49797
G01 X7.40569 Y22.63198
G01 X7.49367 Y22.65868
G01 X7.58242 Y22.69543
G01 X7.82448 Y22.82482
G01 X7.90434 Y22.87819
G01 X8.11648 Y23.05228
G01 X8.18442 Y23.12020
G01 X8.35852 Y23.33236
G01 X8.41188 Y23.41222
G01 X8.44866 Y23.48103
G01 X8.59395 Y23.48103
G01 X8.57767 Y23.44722
G01 X8.45755 Y23.25609
G01 X8.31678 Y23.07958
G01 X8.15712 Y22.91992
G01 X7.98061 Y22.77915
G01 X7.78948 Y22.65904
G01 X7.58610 Y22.56112
G01 X7.40569 Y22.49797
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.52341 Y26.17102 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.52341 Y26.17102
G01 X7.58242 Y26.19545
G01 X7.82448 Y26.32481
G01 X7.90434 Y26.37818
G01 X8.06370 Y26.50896
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.31392 Y32.57398 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.31392 Y32.57398
G01 X3.31392 Y34.27397
G01 X3.31507 Y34.31924
G01 X3.31702 Y34.33877
G01 X3.34268 Y34.43577
G01 X3.38553 Y34.51990
G01 X3.44494 Y34.59323
G01 X3.51827 Y34.65264
G01 X3.60239 Y34.69549
G01 X3.69939 Y34.72114
G01 X3.71890 Y34.72310
G01 X3.76419 Y34.72424
G01 X5.46419 Y34.72424
G01 X5.50940 Y34.72310
G01 X5.52896 Y34.72114
G01 X5.60508 Y34.70199
G01 X5.62601 Y34.69546
G01 X5.62713 Y34.69498
G01 X5.71006 Y34.65264
G01 X5.72360 Y34.64260
G01 X5.78344 Y34.59323
G01 X5.84285 Y34.51984
G01 X5.88567 Y34.43580
G01 X5.91133 Y34.33877
G01 X5.91328 Y34.31924
G01 X5.91443 Y34.27397
G01 X5.91443 Y32.57398
G01 X5.91328 Y32.52874
G01 X5.91133 Y32.50921
G01 X5.88567 Y32.41220
G01 X5.85011 Y32.34096
G01 X5.84280 Y32.32808
G01 X5.78341 Y32.25475
G01 X5.71008 Y32.19534
G01 X5.62596 Y32.15249
G01 X5.52896 Y32.12683
G01 X5.50942 Y32.12488
G01 X5.46419 Y32.12374
G01 X3.76419 Y32.12374
G01 X3.71893 Y32.12488
G01 X3.69939 Y32.12683
G01 X3.60237 Y32.15249
G01 X3.54811 Y32.17885
G01 X3.51829 Y32.19534
G01 X3.44494 Y32.25472
G01 X3.39815 Y32.31114
G01 X3.38553 Y32.32810
G01 X3.34318 Y32.41104
G01 X3.34270 Y32.41215
G01 X3.33412 Y32.44004
G01 X3.31702 Y32.50921
G01 X3.31507 Y32.52874
G01 X3.31392 Y32.57398
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.83035 Y26.56418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.83035 Y26.56418
G01 X4.82748 Y26.56766
G01 X4.80043 Y26.60190
G01 X4.77226 Y26.64102
G01 X4.74036 Y26.68275
G01 X4.73609 Y26.68801
G01 X4.60231 Y26.85656
G01 X4.57559 Y26.89200
G01 X4.55311 Y26.93020
G01 X4.45705 Y27.10307
G01 X4.42421 Y27.17251
G01 X4.39032 Y27.25428
G01 X4.36447 Y27.32659
G01 X4.31016 Y27.51673
G01 X4.29904 Y27.55966
G01 X4.29289 Y27.60360
G01 X4.27028 Y27.80005
G01 X4.26652 Y27.87678
G01 X4.26652 Y27.96525
G01 X4.27028 Y28.04201
G01 X4.29289 Y28.23842
G01 X4.29904 Y28.28239
G01 X4.31016 Y28.32529
G01 X4.36447 Y28.51546
G01 X4.39032 Y28.58778
G01 X4.42421 Y28.66956
G01 X4.45705 Y28.73898
G01 X4.55311 Y28.91186
G01 X4.57559 Y28.95006
G01 X4.60229 Y28.98546
G01 X4.72525 Y29.14038
G01 X4.77681 Y29.19727
G01 X4.83942 Y29.25989
G01 X4.89632 Y29.31145
G01 X5.05123 Y29.43441
G01 X5.08664 Y29.46110
G01 X5.12484 Y29.48358
G01 X5.29771 Y29.57965
G01 X5.36713 Y29.61249
G01 X5.44892 Y29.64637
G01 X5.52123 Y29.67223
G01 X5.71140 Y29.72653
G01 X5.75430 Y29.73766
G01 X5.79822 Y29.74381
G01 X5.99469 Y29.76641
G01 X6.07140 Y29.77020
G01 X6.11567 Y29.77129
G01 X6.81569 Y29.77129
G01 X6.85997 Y29.77020
G01 X6.93665 Y29.76641
G01 X7.13314 Y29.74381
G01 X7.17703 Y29.73766
G01 X7.21996 Y29.72653
G01 X7.41011 Y29.67225
G01 X7.48244 Y29.64637
G01 X7.56423 Y29.61249
G01 X7.63363 Y29.57967
G01 X7.80652 Y29.48358
G01 X7.84470 Y29.46110
G01 X7.88013 Y29.43438
G01 X8.03502 Y29.31145
G01 X8.09194 Y29.25986
G01 X8.15450 Y29.19730
G01 X8.20609 Y29.14038
G01 X8.32905 Y28.98546
G01 X8.35575 Y28.95006
G01 X8.37825 Y28.91180
G01 X8.47437 Y28.73888
G01 X8.50716 Y28.66951
G01 X8.54101 Y28.58780
G01 X8.56687 Y28.51549
G01 X8.62118 Y28.32532
G01 X8.63233 Y28.28237
G01 X8.63847 Y28.23842
G01 X8.66108 Y28.04198
G01 X8.66484 Y27.96525
G01 X8.66484 Y27.87678
G01 X8.66108 Y27.80007
G01 X8.63847 Y27.60360
G01 X8.63233 Y27.55969
G01 X8.62118 Y27.51668
G01 X8.56687 Y27.32657
G01 X8.54099 Y27.25423
G01 X8.50716 Y27.17254
G01 X8.47431 Y27.10307
G01 X8.37825 Y26.93025
G01 X8.35575 Y26.89197
G01 X8.32903 Y26.85654
G01 X8.19524 Y26.68798
G01 X8.19100 Y26.68275
G01 X8.16073 Y26.64328
G01 X8.15905 Y26.64099
G01 X8.13009 Y26.60312
G01 X8.10269 Y26.56914
G01 X8.06370 Y26.50896
G01 X8.04747 Y26.48389
G01 X8.04295 Y26.47023
G01 X8.03055 Y26.39035
G01 X8.02557 Y26.32065
G01 X8.02781 Y26.22753
G01 X8.04759 Y26.13655
G01 X8.08425 Y26.05093
G01 X8.11772 Y25.98961
G01 X8.20132 Y25.87793
G01 X8.31678 Y25.76248
G01 X8.45755 Y25.58598
G01 X8.57764 Y25.39482
G01 X8.59392 Y25.36104
G01 X8.44863 Y25.36104
G01 X8.41188 Y25.42979
G01 X8.35852 Y25.50965
G01 X8.18442 Y25.72182
G01 X8.11648 Y25.78974
G01 X7.90434 Y25.96385
G01 X7.82448 Y26.01722
G01 X7.58242 Y26.14658
G01 X7.52341 Y26.17102
G01 X5.40787 Y26.17102
G01 X5.34895 Y26.14658
G01 X5.10691 Y26.01722
G01 X5.02703 Y25.96385
G01 X4.81489 Y25.78974
G01 X4.74697 Y25.72182
G01 X4.57285 Y25.50965
G01 X4.51948 Y25.42979
G01 X4.48273 Y25.36104
G01 X4.33744 Y25.36104
G01 X4.35370 Y25.39482
G01 X4.47381 Y25.58600
G01 X4.61456 Y25.76248
G01 X4.73002 Y25.87793
G01 X4.79576 Y25.95951
G01 X4.82426 Y26.00386
G01 X4.86249 Y26.07589
G01 X4.88822 Y26.15326
G01 X4.90079 Y26.23386
G01 X4.90577 Y26.30353
G01 X4.90366 Y26.39560
G01 X4.88730 Y26.47198
G01 X4.83035 Y26.56418
G01 X4.86116 Y26.51432
G01 X5.02703 Y26.37818
G01 X5.10691 Y26.32481
G01 X5.34895 Y26.19545
G01 X5.40787 Y26.17102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.33742 Y23.48103 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.33742 Y23.48103
G01 X4.35370 Y23.44722
G01 X4.47381 Y23.25609
G01 X4.61456 Y23.07958
G01 X4.77422 Y22.91992
G01 X4.95072 Y22.77915
G01 X5.14189 Y22.65906
G01 X5.34526 Y22.56112
G01 X5.52568 Y22.49797
G01 X5.52568 Y22.63198
G01 X5.43769 Y22.65868
G01 X5.34895 Y22.69543
G01 X5.10691 Y22.82482
G01 X5.02703 Y22.87819
G01 X4.81489 Y23.05228
G01 X4.74697 Y23.12020
G01 X4.57285 Y23.33236
G01 X4.51948 Y23.41222
G01 X4.48270 Y23.48103
G01 X4.33742 Y23.48103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X1.50748 Y17.33428 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X1.50748 Y17.33428
G01 X1.43382 Y17.24452
G01 X1.38045 Y17.16466
G01 X1.31113 Y17.03497
G01 X1.27438 Y16.94622
G01 X1.23171 Y16.80555
G01 X1.21296 Y16.71132
G01 X1.19854 Y16.56499
G01 X1.19620 Y16.51699
G01 X1.19620 Y14.51696
G01 X1.19854 Y14.46896
G01 X1.21296 Y14.32263
G01 X1.23171 Y14.22842
G01 X1.26905 Y14.10526
G01 X1.27438 Y14.08773
G01 X1.31113 Y13.99898
G01 X1.38045 Y13.86931
G01 X1.43382 Y13.78943
G01 X1.50732 Y13.69987
G01 X1.53549 Y13.68275
G01 X1.56163 Y13.66403
G01 X1.61296 Y13.62974
G01 X1.61990 Y13.62542
G01 X1.72388 Y13.55024
G01 X1.72995 Y13.54516
G01 X1.73237 Y13.54343
G01 X1.80697 Y13.49568
G01 X1.89122 Y13.44740
G01 X1.93646 Y13.42601
G01 X2.01809 Y13.39220
G01 X2.06521 Y13.37534
G01 X2.15891 Y13.34988
G01 X2.24552 Y13.33091
G01 X2.24824 Y13.33043
G01 X2.38906 Y13.31796
G01 X2.39195 Y13.31783
G01 X2.43618 Y13.31674
G01 X3.72568 Y13.31674
G01 X3.85517 Y13.30742
G01 X3.92502 Y13.29738
G01 X3.93620 Y13.29571
G01 X3.98329 Y13.28837
G01 X4.01075 Y13.28194
G01 X4.02185 Y13.27935
G01 X4.09556 Y13.23200
G01 X4.16297 Y13.16774
G01 X4.20874 Y13.11493
G01 X4.26282 Y13.03901
G01 X4.30153 Y12.95423
G01 X4.32350 Y12.86363
G01 X4.33343 Y12.79446
G01 X4.33810 Y12.70785
G01 X4.32947 Y12.63810
G01 X4.31915 Y12.61707
G01 X4.28131 Y12.54727
G01 X4.24994 Y12.49474
G01 X4.23234 Y12.46642
G01 X4.18944 Y12.40015
G01 X4.18789 Y12.39777
G01 X4.18448 Y12.39142
G01 X4.10399 Y12.23996
G01 X4.09500 Y12.22258
G01 X4.07107 Y12.15779
G01 X4.03099 Y12.03500
G01 X4.02086 Y11.99378
G01 X4.00402 Y11.90694
G01 X3.99386 Y11.83612
G01 X3.98857 Y11.76795
G01 X3.98702 Y11.73622
G01 X3.98593 Y11.69198
G01 X3.98593 Y9.94197
G01 X3.98702 Y9.89772
G01 X3.98857 Y9.86607
G01 X3.99386 Y9.79785
G01 X4.00402 Y9.72706
G01 X4.02086 Y9.64024
G01 X4.03099 Y9.59897
G01 X4.07107 Y9.47621
G01 X4.09500 Y9.41139
G01 X4.10402 Y9.39399
G01 X4.17948 Y9.25200
G01 X4.18451 Y9.24253
G01 X4.18791 Y9.23620
G01 X4.23495 Y9.16978
G01 X4.30671 Y9.07760
G01 X4.34354 Y9.03696
G01 X4.40615 Y8.97435
G01 X4.44676 Y8.93755
G01 X4.53897 Y8.86577
G01 X4.60539 Y8.81873
G01 X4.61171 Y8.81532
G01 X4.76317 Y8.73483
G01 X4.78057 Y8.72581
G01 X4.84531 Y8.70189
G01 X4.96812 Y8.66181
G01 X5.00937 Y8.65167
G01 X5.09624 Y8.63481
G01 X5.16703 Y8.62465
G01 X5.23523 Y8.61939
G01 X5.26690 Y8.61781
G01 X5.31118 Y8.61672
G01 X7.06119 Y8.61672
G01 X7.10541 Y8.61781
G01 X7.13718 Y8.61939
G01 X7.20536 Y8.62465
G01 X7.27612 Y8.63481
G01 X7.36301 Y8.65167
G01 X7.40421 Y8.66178
G01 X7.52702 Y8.70189
G01 X7.59179 Y8.72581
G01 X7.60914 Y8.73481
G01 X7.76060 Y8.81530
G01 X7.76695 Y8.81873
G01 X7.83342 Y8.86579
G01 X7.92557 Y8.93752
G01 X7.96621 Y8.97438
G01 X8.02880 Y9.03696
G01 X8.06560 Y9.07758
G01 X8.13738 Y9.16978
G01 X8.18442 Y9.23620
G01 X8.18780 Y9.24248
G01 X8.26832 Y9.39394
G01 X8.27736 Y9.41139
G01 X8.30129 Y9.47621
G01 X8.34137 Y9.59897
G01 X8.35151 Y9.64024
G01 X8.36835 Y9.72706
G01 X8.37851 Y9.79787
G01 X8.38379 Y9.86605
G01 X8.38534 Y9.89772
G01 X8.38643 Y9.94197
G01 X8.38643 Y11.69198
G01 X8.38534 Y11.73622
G01 X8.38379 Y11.76792
G01 X8.37851 Y11.83610
G01 X8.36835 Y11.90694
G01 X8.35151 Y11.99378
G01 X8.34137 Y12.03503
G01 X8.30129 Y12.15779
G01 X8.27736 Y12.22258
G01 X8.26835 Y12.24001
G01 X8.25041 Y12.27374
G01 X8.19761 Y12.39302
G01 X8.19649 Y12.39611
G01 X8.17127 Y12.45893
G01 X8.16050 Y12.48326
G01 X8.15212 Y12.50767
G01 X8.15001 Y12.51387
G01 X8.14635 Y12.54849
G01 X8.15425 Y12.64130
G01 X8.17957 Y12.73094
G01 X8.20487 Y12.79606
G01 X8.24617 Y12.87823
G01 X8.24617 Y13.27699
G01 X7.43619 Y13.27699
G01 X7.34059 Y13.28638
G01 X7.24866 Y13.31427
G01 X7.16395 Y13.35956
G01 X7.08971 Y13.42050
G01 X7.02877 Y13.49474
G01 X6.98349 Y13.57945
G01 X6.95560 Y13.67137
G01 X6.94620 Y13.76698
G01 X6.94620 Y14.57701
G01 X6.82618 Y14.57701
G01 X6.82618 Y13.69748
G01 X6.82811 Y13.66477
G01 X6.82578 Y13.66462
G01 X6.83165 Y13.58293
G01 X6.82667 Y13.51323
G01 X6.81122 Y13.42134
G01 X6.77864 Y13.33401
G01 X6.73012 Y13.25443
G01 X6.68824 Y13.19850
G01 X6.62558 Y13.12959
G01 X6.55311 Y13.07536
G01 X6.49911 Y13.05697
G01 X6.46291 Y13.04465
G01 X6.39306 Y13.03205
G01 X6.24610 Y13.01753
G01 X6.23726 Y13.01737
G01 X6.22174 Y13.01725
G01 X5.45022 Y13.01725
G01 X5.32070 Y13.02657
G01 X5.31115 Y13.02794
G01 X5.26523 Y13.03338
G01 X5.25032 Y13.03480
G01 X5.18296 Y13.04668
G01 X5.16144 Y13.05052
G01 X5.15865 Y13.05166
G01 X5.08029 Y13.10201
G01 X5.01288 Y13.16627
G01 X4.96713 Y13.21905
G01 X4.91311 Y13.29492
G01 X4.87440 Y13.37963
G01 X4.85243 Y13.47015
G01 X4.84247 Y13.53932
G01 X4.84001 Y13.65890
G01 X4.84425 Y13.67752
G01 X4.88923 Y13.76733
G01 X4.91351 Y13.81006
G01 X4.91435 Y13.81156
G01 X4.95751 Y13.88778
G01 X4.95989 Y13.89197
G01 X5.00577 Y13.97203
G01 X5.02715 Y14.01727
G01 X5.06096 Y14.09891
G01 X5.07783 Y14.14602
G01 X5.10328 Y14.23972
G01 X5.12225 Y14.32636
G01 X5.12273 Y14.32908
G01 X5.13520 Y14.46987
G01 X5.13533 Y14.47277
G01 X5.13642 Y14.51699
G01 X5.13642 Y16.51701
G01 X5.13533 Y16.56121
G01 X5.13520 Y16.56413
G01 X5.12273 Y16.70492
G01 X5.12225 Y16.70764
G01 X5.10328 Y16.79428
G01 X5.07783 Y16.88798
G01 X5.06096 Y16.93507
G01 X5.02715 Y17.01670
G01 X5.00577 Y17.06194
G01 X4.95748 Y17.14619
G01 X4.90973 Y17.22079
G01 X4.90808 Y17.22311
G01 X4.81550 Y17.33370
G01 X4.78618 Y17.36705
G01 X4.75288 Y17.39633
G01 X4.64229 Y17.48892
G01 X4.64001 Y17.49054
G01 X4.56538 Y17.53832
G01 X4.48113 Y17.58658
G01 X4.43592 Y17.60797
G01 X4.35426 Y17.64177
G01 X4.32416 Y17.65257
G01 X4.30706 Y17.65869
G01 X4.21344 Y17.68409
G01 X4.12682 Y17.70309
G01 X4.12413 Y17.70352
G01 X3.98326 Y17.71602
G01 X3.98039 Y17.71617
G01 X3.93620 Y17.71724
G01 X2.43618 Y17.71724
G01 X2.39195 Y17.71617
G01 X2.38906 Y17.71602
G01 X2.24822 Y17.70352
G01 X2.24552 Y17.70309
G01 X2.15891 Y17.68409
G01 X2.06518 Y17.65864
G01 X2.01809 Y17.64180
G01 X1.93643 Y17.60797
G01 X1.89122 Y17.58658
G01 X1.80697 Y17.53832
G01 X1.73234 Y17.49054
G01 X1.73011 Y17.48894
G01 X1.72843 Y17.48754
G01 X1.72452 Y17.48427
G01 X1.61845 Y17.40764
G01 X1.61296 Y17.40423
G01 X1.55939 Y17.36852
G01 X1.53539 Y17.35130
G01 X1.50750 Y17.33431
G01 X1.50748 Y17.33428
G01 X1.50080 Y17.33022
G01 X1.47834 Y17.32262
G01 X1.38604 Y17.31002
G01 X1.29302 Y17.31513
G01 X1.22394 Y17.32559
G01 X1.13359 Y17.34817
G01 X1.07118 Y17.37723
G01 X1.04913 Y17.38747
G01 X1.02498 Y17.40494
G01 X0.97364 Y17.44203
G01 X0.92117 Y17.48815
G01 X0.85772 Y17.55559
G01 X0.80806 Y17.63375
G01 X0.77402 Y17.71988
G01 X0.75482 Y17.78615
G01 X0.73547 Y17.92247
G01 X0.73547 Y86.17422
G01 X0.75533 Y86.31230
G01 X0.77502 Y86.37933
G01 X0.80964 Y86.46584
G01 X0.86003 Y86.54420
G01 X0.92432 Y86.61164
G01 X0.97712 Y86.65738
G01 X1.04299 Y86.70544
G01 X1.11588 Y86.74194
G01 X1.19384 Y86.76582
G01 X1.24535 Y86.77702
G01 X1.34949 Y86.78822
G01 X94.53457 Y86.78822
G01 X94.67262 Y86.76836
G01 X94.73965 Y86.74867
G01 X94.82611 Y86.71405
G01 X94.90447 Y86.66371
G01 X94.97188 Y86.59945
G01 X95.01763 Y86.54666
G01 X95.06561 Y86.48101
G01 X95.10206 Y86.40829
G01 X95.12598 Y86.33056
G01 X95.13718 Y86.27941
G01 X95.14854 Y86.17605
G01 X95.23929 Y55.60004
G01 X95.23967 Y55.46618
G01 X95.23967 Y28.13982
G01 X95.28227 Y28.06012
G01 X95.31016 Y27.96819
G01 X95.31958 Y27.87259
G01 X95.31958 Y21.12739
G01 X95.31016 Y21.03181
G01 X95.28227 Y20.93989
G01 X95.23967 Y20.86018
G01 X95.23967 Y1.34950
G01 X95.21981 Y1.21145
G01 X95.20013 Y1.14442
G01 X95.16550 Y1.05791
G01 X95.11511 Y0.97955
G01 X95.05082 Y0.91211
G01 X94.99802 Y0.86637
G01 X94.93216 Y0.81831
G01 X94.85926 Y0.78181
G01 X94.78130 Y0.75794
G01 X94.72979 Y0.74673
G01 X94.62568 Y0.73553
G01 X1.34949 Y0.73553
G01 X1.21141 Y0.75540
G01 X1.14438 Y0.77508
G01 X1.05795 Y0.80968
G01 X0.97964 Y0.85999
G01 X0.91225 Y0.92420
G01 X0.86648 Y0.97699
G01 X0.81832 Y1.04287
G01 X0.78180 Y1.11585
G01 X0.75787 Y1.19388
G01 X0.74667 Y1.24539
G01 X0.73547 Y1.34950
G01 X0.73547 Y13.11148
G01 X0.75533 Y13.24955
G01 X0.77502 Y13.31659
G01 X0.80961 Y13.40305
G01 X0.85995 Y13.48138
G01 X0.92422 Y13.54879
G01 X0.97702 Y13.59456
G01 X1.05294 Y13.64864
G01 X1.13773 Y13.68735
G01 X1.22833 Y13.70932
G01 X1.29749 Y13.71925
G01 X1.38995 Y13.72370
G01 X1.48159 Y13.71067
G01 X1.49988 Y13.70439
G01 X1.53549 Y13.68275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.32870 Y12.63655 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.32870 Y12.63655
G01 X4.38161 Y12.68946
G01 X4.51420 Y12.79830
G01 X4.59408 Y12.85166
G01 X4.74537 Y12.93251
G01 X4.83409 Y12.96927
G01 X4.99825 Y13.01908
G01 X5.09246 Y13.03779
G01 X5.18296 Y13.04668
G01 X5.18298 Y13.04671
G01 X5.25032 Y13.03480
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.49911 Y13.05697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.49911 Y13.05697
G01 X7.06119 Y13.05697
G01 X7.10922 Y13.05461
G01 X7.27993 Y13.03779
G01 X7.37414 Y13.01908
G01 X7.53827 Y12.96927
G01 X7.62702 Y12.93251
G01 X7.77830 Y12.85166
G01 X7.85816 Y12.79830
G01 X7.99075 Y12.68946
G01 X8.05867 Y12.62154
G01 X8.15212 Y12.50767
G01 X8.15214 Y12.50767
G01 X8.16050 Y12.48326
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.84425 Y13.67752 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.84425 Y13.67752
G01 X4.84394 Y13.67694
G01 X4.84201 Y13.67252
G01 X4.77737 Y13.60787
G01 X4.66373 Y13.51460
G01 X4.58385 Y13.46124
G01 X4.45418 Y13.39192
G01 X4.36543 Y13.35517
G01 X4.22474 Y13.31250
G01 X4.13053 Y13.29375
G01 X4.01075 Y13.28194
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.82618 Y16.45699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.82618 Y16.45699
G01 X6.94620 Y16.45699
G01 X6.94620 Y17.26700
G01 X6.95560 Y17.36258
G01 X6.98349 Y17.45452
G01 X7.02877 Y17.53921
G01 X7.08971 Y17.61345
G01 X7.16395 Y17.67439
G01 X7.24866 Y17.71970
G01 X7.34059 Y17.74756
G01 X7.43619 Y17.75699
G01 X8.24617 Y17.75699
G01 X8.24617 Y17.87698
G01 X7.37051 Y17.87698
G01 X7.24960 Y17.85069
G01 X7.14252 Y17.80482
G01 X7.04602 Y17.73951
G01 X6.96365 Y17.65714
G01 X6.89835 Y17.56065
G01 X6.85247 Y17.45358
G01 X6.82618 Y17.33268
G01 X6.82618 Y16.45699
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.12618 Y13.15700 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.12618 Y13.15700
G01 X10.52882 Y13.15700
G01 X10.66687 Y13.13713
G01 X10.73390 Y13.11745
G01 X10.82036 Y13.08285
G01 X10.89869 Y13.03251
G01 X10.96611 Y12.96825
G01 X11.01188 Y12.91544
G01 X11.06595 Y12.83952
G01 X11.10466 Y12.75474
G01 X11.12663 Y12.66414
G01 X11.13656 Y12.59497
G01 X11.14050 Y12.49332
G01 X11.12336 Y12.39307
G01 X11.11462 Y12.36190
G01 X11.09323 Y12.30125
G01 X11.03425 Y12.16358
G01 X11.00796 Y12.04270
G01 X11.00796 Y11.61702
G01 X11.12798 Y11.61702
G01 X11.12798 Y11.97701
G01 X11.13738 Y12.07259
G01 X11.16527 Y12.16452
G01 X11.21055 Y12.24925
G01 X11.27149 Y12.32350
G01 X11.34573 Y12.38443
G01 X11.43044 Y12.42972
G01 X11.52237 Y12.45761
G01 X11.61797 Y12.46701
G01 X11.97794 Y12.46701
G01 X11.97794 Y12.59383
G01 X11.88726 Y12.60688
G01 X11.82023 Y12.62657
G01 X11.73377 Y12.66116
G01 X11.65544 Y12.71151
G01 X11.58802 Y12.77577
G01 X11.54225 Y12.82858
G01 X11.48818 Y12.90450
G01 X11.44947 Y12.98928
G01 X11.42750 Y13.07988
G01 X11.41756 Y13.14905
G01 X11.41363 Y13.25070
G01 X11.43077 Y13.35095
G01 X11.43951 Y13.38212
G01 X11.46090 Y13.44275
G01 X11.51985 Y13.58039
G01 X11.54616 Y13.70145
G01 X11.54616 Y14.57701
G01 X11.42618 Y14.57701
G01 X11.42618 Y13.76698
G01 X11.41678 Y13.67137
G01 X11.38889 Y13.57945
G01 X11.34360 Y13.49474
G01 X11.28267 Y13.42050
G01 X11.20842 Y13.35956
G01 X11.12371 Y13.31427
G01 X11.03179 Y13.28638
G01 X10.93618 Y13.27699
G01 X10.12618 Y13.27699
G01 X10.12618 Y13.15700
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.85797 Y12.46701 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.85797 Y12.46701
G01 X14.21797 Y12.46701
G01 X14.31357 Y12.45761
G01 X14.40549 Y12.42972
G01 X14.49020 Y12.38443
G01 X14.56445 Y12.32350
G01 X14.62538 Y12.24925
G01 X14.67067 Y12.16452
G01 X14.69856 Y12.07259
G01 X14.70796 Y11.97701
G01 X14.70796 Y11.61702
G01 X14.82795 Y11.61702
G01 X14.82795 Y12.04257
G01 X14.80161 Y12.16363
G01 X14.75576 Y12.27071
G01 X14.69048 Y12.36718
G01 X14.60811 Y12.44956
G01 X14.51164 Y12.51483
G01 X14.40455 Y12.56068
G01 X14.28350 Y12.58702
G01 X13.85797 Y12.58702
G01 X13.85797 Y12.46701
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.00796 Y9.35403 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.00796 Y9.35403
G01 X11.00796 Y9.73701
G01 X11.12798 Y9.73701
G01 X11.12798 Y9.37702
G01 X11.13456 Y9.31012
G01 X11.07124 Y9.33547
G01 X11.00796 Y9.35403
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.45793 Y8.91598 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.45793 Y8.91598
G01 X11.46897 Y8.86511
G01 X11.48018 Y8.76097
G01 X11.48018 Y7.97494
G01 X11.54896 Y7.93819
G01 X11.62884 Y7.88480
G01 X11.84098 Y7.71070
G01 X11.90890 Y7.64278
G01 X12.08302 Y7.43062
G01 X12.13638 Y7.35076
G01 X12.26577 Y7.10872
G01 X12.29018 Y7.04975
G01 X12.31462 Y7.10872
G01 X12.44398 Y7.35076
G01 X12.49734 Y7.43062
G01 X12.67146 Y7.64278
G01 X12.73938 Y7.71070
G01 X12.95155 Y7.88480
G01 X13.03140 Y7.93819
G01 X13.27344 Y8.06755
G01 X13.36219 Y8.10430
G01 X13.62482 Y8.18398
G01 X13.71903 Y8.20273
G01 X13.99216 Y8.22963
G01 X14.08822 Y8.22963
G01 X14.36135 Y8.20273
G01 X14.45556 Y8.18398
G01 X14.71819 Y8.10430
G01 X14.80694 Y8.06755
G01 X15.04898 Y7.93819
G01 X15.12883 Y7.88480
G01 X15.34100 Y7.71070
G01 X15.40890 Y7.64278
G01 X15.58301 Y7.43062
G01 X15.63638 Y7.35076
G01 X15.76574 Y7.10872
G01 X15.79020 Y7.04975
G01 X15.81461 Y7.10872
G01 X15.94400 Y7.35076
G01 X15.99734 Y7.43062
G01 X16.17145 Y7.64278
G01 X16.23937 Y7.71070
G01 X16.45151 Y7.88480
G01 X16.53140 Y7.93819
G01 X16.60016 Y7.97494
G01 X16.60016 Y8.12025
G01 X16.56637 Y8.10397
G01 X16.37519 Y7.98386
G01 X16.17445 Y7.82373
G01 X16.07100 Y7.76046
G01 X16.01171 Y7.73364
G01 X15.92657 Y7.70418
G01 X15.83739 Y7.69082
G01 X15.74732 Y7.69402
G01 X15.67806 Y7.70291
G01 X15.57280 Y7.72848
G01 X15.47570 Y7.77657
G01 X15.44707 Y7.79496
G01 X15.44806 Y7.79648
G01 X15.40590 Y7.82373
G01 X15.20514 Y7.98386
G01 X15.01395 Y8.10397
G01 X14.95987 Y8.13001
G01 X14.84423 Y8.20773
G01 X14.79234 Y8.25454
G01 X14.72945 Y8.32328
G01 X14.68065 Y8.40268
G01 X14.64778 Y8.48987
G01 X14.62947 Y8.55731
G01 X14.61372 Y8.64913
G01 X14.61563 Y8.74227
G01 X14.63514 Y8.83338
G01 X14.65619 Y8.90001
G01 X14.71763 Y9.02701
G01 X14.75579 Y9.08337
G01 X14.80161 Y9.19043
G01 X14.82795 Y9.31149
G01 X14.82795 Y9.73701
G01 X14.70796 Y9.73701
G01 X14.70796 Y9.37702
G01 X14.69856 Y9.28141
G01 X14.67067 Y9.18949
G01 X14.62538 Y9.10478
G01 X14.56445 Y9.03054
G01 X14.49020 Y8.96960
G01 X14.40549 Y8.92432
G01 X14.31357 Y8.89643
G01 X14.21797 Y8.88700
G01 X11.61797 Y8.88700
G01 X11.52237 Y8.89643
G01 X11.45793 Y8.91598
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.61711 Y6.93199 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.61711 Y6.93199
G01 X8.75117 Y6.93199
G01 X8.77784 Y7.01998
G01 X8.81462 Y7.10872
G01 X8.94399 Y7.35076
G01 X8.99735 Y7.43062
G01 X9.17147 Y7.64278
G01 X9.23939 Y7.71070
G01 X9.45153 Y7.88480
G01 X9.53141 Y7.93819
G01 X9.60017 Y7.97494
G01 X9.60017 Y8.12023
G01 X9.56639 Y8.10397
G01 X9.37520 Y7.98383
G01 X9.19870 Y7.84309
G01 X9.03906 Y7.68345
G01 X8.89832 Y7.50697
G01 X8.77820 Y7.31578
G01 X8.68023 Y7.11238
G01 X8.61711 Y6.93199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.61711 Y5.05198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.61711 Y5.05198
G01 X8.75115 Y5.05198
G01 X8.77784 Y4.96397
G01 X8.81462 Y4.87523
G01 X8.94399 Y4.63319
G01 X8.99735 Y4.55333
G01 X9.17147 Y4.34117
G01 X9.23939 Y4.27325
G01 X9.45153 Y4.09915
G01 X9.53141 Y4.04576
G01 X9.60017 Y4.00901
G01 X9.60017 Y3.86375
G01 X9.56639 Y3.88000
G01 X9.37520 Y4.00014
G01 X9.19870 Y4.14089
G01 X9.03906 Y4.30053
G01 X8.89832 Y4.47700
G01 X8.77820 Y4.66819
G01 X8.68023 Y4.87159
G01 X8.61711 Y5.05198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.48018 Y3.86372 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.48018 Y3.86372
G01 X11.51398 Y3.88000
G01 X11.70512 Y4.00012
G01 X11.90585 Y4.16022
G01 X12.00926 Y4.22349
G01 X12.06849 Y4.25031
G01 X12.15363 Y4.27977
G01 X12.24273 Y4.29316
G01 X12.33280 Y4.28998
G01 X12.40209 Y4.28112
G01 X12.50763 Y4.25549
G01 X12.60494 Y4.20723
G01 X12.63362 Y4.18879
G01 X12.63265 Y4.18729
G01 X12.67448 Y4.16022
G01 X12.87522 Y4.00012
G01 X13.06638 Y3.88003
G01 X13.10016 Y3.86375
G01 X13.10016 Y4.00901
G01 X13.03140 Y4.04576
G01 X12.95155 Y4.09915
G01 X12.73938 Y4.27325
G01 X12.67146 Y4.34117
G01 X12.49734 Y4.55333
G01 X12.44398 Y4.63319
G01 X12.31462 Y4.87523
G01 X12.29018 Y4.93420
G01 X12.26577 Y4.87523
G01 X12.13638 Y4.63319
G01 X12.08302 Y4.55333
G01 X11.90890 Y4.34117
G01 X11.84098 Y4.27325
G01 X11.62884 Y4.09915
G01 X11.54896 Y4.04576
G01 X11.48018 Y4.00901
G01 X11.48018 Y3.86372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.98017 Y3.86372 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.98017 Y3.86372
G01 X15.01395 Y3.88000
G01 X15.20514 Y4.00012
G01 X15.40590 Y4.16024
G01 X15.50920 Y4.22346
G01 X15.56841 Y4.25028
G01 X15.65355 Y4.27975
G01 X15.74270 Y4.29316
G01 X15.83277 Y4.28998
G01 X15.90209 Y4.28112
G01 X16.00762 Y4.25549
G01 X16.10496 Y4.20723
G01 X16.13363 Y4.18879
G01 X16.13259 Y4.18719
G01 X16.17445 Y4.16024
G01 X16.37519 Y4.00012
G01 X16.56637 Y3.88000
G01 X16.60016 Y3.86372
G01 X16.60016 Y4.00901
G01 X16.53140 Y4.04576
G01 X16.45151 Y4.09915
G01 X16.23937 Y4.27325
G01 X16.17145 Y4.34117
G01 X15.99734 Y4.55333
G01 X15.94400 Y4.63319
G01 X15.81461 Y4.87523
G01 X15.79020 Y4.93420
G01 X15.76574 Y4.87523
G01 X15.63638 Y4.63319
G01 X15.58301 Y4.55333
G01 X15.40890 Y4.34117
G01 X15.34100 Y4.27325
G01 X15.12883 Y4.09915
G01 X15.04898 Y4.04576
G01 X14.98017 Y4.00901
G01 X14.98017 Y3.86372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.48019 Y3.86375 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.48019 Y3.86375
G01 X18.48019 Y4.00901
G01 X18.54897 Y4.04576
G01 X18.62883 Y4.09915
G01 X18.84099 Y4.27325
G01 X18.90891 Y4.34117
G01 X19.08303 Y4.55333
G01 X19.13640 Y4.63319
G01 X19.26576 Y4.87523
G01 X19.29017 Y4.93420
G01 X19.31460 Y4.87523
G01 X19.44396 Y4.63319
G01 X19.49736 Y4.55333
G01 X19.67147 Y4.34117
G01 X19.73939 Y4.27325
G01 X19.95153 Y4.09915
G01 X20.03142 Y4.04576
G01 X20.10017 Y4.00901
G01 X20.10017 Y3.86372
G01 X20.06637 Y3.88000
G01 X19.87523 Y4.00012
G01 X19.67450 Y4.16022
G01 X19.63264 Y4.18729
G01 X19.63360 Y4.18879
G01 X19.60495 Y4.20723
G01 X19.50762 Y4.25549
G01 X19.40208 Y4.28112
G01 X19.33276 Y4.28998
G01 X19.24270 Y4.29316
G01 X19.15357 Y4.27975
G01 X19.06840 Y4.25028
G01 X19.00917 Y4.22346
G01 X18.90587 Y4.16022
G01 X18.70510 Y4.00012
G01 X18.51397 Y3.88003
G01 X18.48019 Y3.86375
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.98018 Y3.86375 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.98018 Y3.86375
G01 X21.98018 Y4.00901
G01 X22.04896 Y4.04576
G01 X22.12885 Y4.09915
G01 X22.34099 Y4.27325
G01 X22.40891 Y4.34117
G01 X22.58302 Y4.55333
G01 X22.63639 Y4.63319
G01 X22.76575 Y4.87523
G01 X22.80253 Y4.96397
G01 X22.82923 Y5.05198
G01 X22.96324 Y5.05198
G01 X22.90012 Y4.87159
G01 X22.80215 Y4.66819
G01 X22.68203 Y4.47700
G01 X22.54129 Y4.30053
G01 X22.38165 Y4.14089
G01 X22.20515 Y4.00014
G01 X22.01396 Y3.88003
G01 X21.98018 Y3.86375
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.48019 Y7.97494 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.48019 Y7.97494
G01 X18.54897 Y7.93819
G01 X18.62883 Y7.88480
G01 X18.84099 Y7.71070
G01 X18.90891 Y7.64278
G01 X19.08303 Y7.43062
G01 X19.13640 Y7.35076
G01 X19.26576 Y7.10872
G01 X19.29017 Y7.04975
G01 X19.31460 Y7.10872
G01 X19.44396 Y7.35076
G01 X19.49736 Y7.43062
G01 X19.67147 Y7.64278
G01 X19.73939 Y7.71070
G01 X19.95153 Y7.88480
G01 X20.03142 Y7.93819
G01 X20.10017 Y7.97494
G01 X20.10017 Y8.12025
G01 X20.06637 Y8.10397
G01 X19.87523 Y7.98386
G01 X19.67450 Y7.82376
G01 X19.57096 Y7.76041
G01 X19.51168 Y7.73359
G01 X19.42651 Y7.70415
G01 X19.33739 Y7.69082
G01 X19.24734 Y7.69402
G01 X19.17805 Y7.70291
G01 X19.07277 Y7.72848
G01 X18.97572 Y7.77657
G01 X18.94704 Y7.79496
G01 X18.94806 Y7.79648
G01 X18.90587 Y7.82376
G01 X18.70510 Y7.98386
G01 X18.51397 Y8.10395
G01 X18.48019 Y8.12023
G01 X18.48019 Y7.97494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.98018 Y7.97494 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.98018 Y7.97494
G01 X22.04896 Y7.93819
G01 X22.12885 Y7.88480
G01 X22.34099 Y7.71070
G01 X22.40891 Y7.64278
G01 X22.58302 Y7.43062
G01 X22.63639 Y7.35076
G01 X22.76575 Y7.10872
G01 X22.80253 Y7.01998
G01 X22.82920 Y6.93199
G01 X22.96324 Y6.93199
G01 X22.90012 Y7.11238
G01 X22.80215 Y7.31578
G01 X22.68203 Y7.50697
G01 X22.54129 Y7.68345
G01 X22.38165 Y7.84309
G01 X22.20515 Y7.98383
G01 X22.01396 Y8.10395
G01 X21.98018 Y8.12023
G01 X21.98018 Y7.97494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.40583 Y10.67704 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.40583 Y10.67704
G01 X26.40837 Y10.72129
G01 X26.42345 Y10.90539
G01 X26.43377 Y10.97486
G01 X26.45104 Y11.06170
G01 X26.46811 Y11.12980
G01 X26.52462 Y11.30567
G01 X26.53920 Y11.34753
G01 X26.55848 Y11.38746
G01 X26.64288 Y11.55177
G01 X26.67898 Y11.61199
G01 X26.72818 Y11.68563
G01 X26.77001 Y11.74204
G01 X26.88949 Y11.88286
G01 X26.91903 Y11.91598
G01 X26.95210 Y11.94549
G01 X27.09295 Y12.06498
G01 X27.14938 Y12.10683
G01 X27.22294 Y12.15598
G01 X27.28322 Y12.19210
G01 X27.44750 Y12.27648
G01 X27.48743 Y12.29578
G01 X27.52934 Y12.31039
G01 X27.70516 Y12.36688
G01 X27.77334 Y12.38395
G01 X27.86008 Y12.40119
G01 X27.92960 Y12.41151
G01 X28.11365 Y12.42662
G01 X28.15794 Y12.42916
G01 X28.20227 Y12.42662
G01 X28.38629 Y12.41153
G01 X28.45583 Y12.40119
G01 X28.54257 Y12.38395
G01 X28.61085 Y12.36685
G01 X28.78657 Y12.31039
G01 X28.82848 Y12.29578
G01 X28.86841 Y12.27648
G01 X29.03269 Y12.19210
G01 X29.09297 Y12.15598
G01 X29.16655 Y12.10681
G01 X29.22294 Y12.06498
G01 X29.36381 Y11.94547
G01 X29.39688 Y11.91595
G01 X29.42637 Y11.88291
G01 X29.54590 Y11.74204
G01 X29.58773 Y11.68565
G01 X29.63693 Y11.61199
G01 X29.67303 Y11.55177
G01 X29.75743 Y11.38746
G01 X29.77671 Y11.34753
G01 X29.79129 Y11.30567
G01 X29.84780 Y11.12982
G01 X29.86487 Y11.06167
G01 X29.88215 Y10.97486
G01 X29.89246 Y10.90536
G01 X29.90755 Y10.72129
G01 X29.91009 Y10.67704
G01 X29.90755 Y10.63277
G01 X29.89246 Y10.44870
G01 X29.88215 Y10.37920
G01 X29.86487 Y10.29239
G01 X29.84780 Y10.22421
G01 X29.79129 Y10.04839
G01 X29.77671 Y10.00651
G01 X29.75743 Y9.96660
G01 X29.67303 Y9.80229
G01 X29.63693 Y9.74204
G01 X29.58773 Y9.66843
G01 X29.54590 Y9.61202
G01 X29.42639 Y9.47115
G01 X29.39690 Y9.43811
G01 X29.36378 Y9.40857
G01 X29.22296 Y9.28909
G01 X29.16655 Y9.24725
G01 X29.09292 Y9.19805
G01 X29.03036 Y9.16054
G01 X29.01908 Y9.15436
G01 X29.00425 Y9.14611
G01 X28.87727 Y9.06087
G01 X28.86772 Y9.05325
G01 X28.81486 Y9.01418
G01 X28.79769 Y9.00707
G01 X28.55383 Y8.93308
G01 X28.45962 Y8.91436
G01 X28.20600 Y8.88937
G01 X28.10994 Y8.88937
G01 X27.85632 Y8.91436
G01 X27.82083 Y8.92142
G01 X27.77034 Y8.94578
G01 X27.76648 Y8.94763
G01 X27.70671 Y8.97679
G01 X27.58456 Y9.02594
G01 X27.56686 Y9.03161
G01 X27.52932 Y9.04367
G01 X27.48746 Y9.05828
G01 X27.44753 Y9.07755
G01 X27.28322 Y9.16196
G01 X27.22297 Y9.19805
G01 X27.14938 Y9.24723
G01 X27.09295 Y9.28909
G01 X26.95213 Y9.40857
G01 X26.91901 Y9.43808
G01 X26.88949 Y9.47120
G01 X26.77001 Y9.61202
G01 X26.72815 Y9.66846
G01 X26.67898 Y9.74204
G01 X26.64288 Y9.80229
G01 X26.55848 Y9.96660
G01 X26.53920 Y10.00651
G01 X26.52462 Y10.04839
G01 X26.46811 Y10.22424
G01 X26.45104 Y10.29236
G01 X26.43377 Y10.37920
G01 X26.42345 Y10.44867
G01 X26.40837 Y10.63277
G01 X26.40583 Y10.67704
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.29619 Y7.04972 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.29619 Y7.04972
G01 X30.32063 Y7.10872
G01 X30.44999 Y7.35076
G01 X30.50335 Y7.43062
G01 X30.52195 Y7.45327
G01 X30.55311 Y7.47730
G01 X30.60793 Y7.52269
G01 X30.70323 Y7.61370
G01 X30.70734 Y7.61827
G01 X30.76990 Y7.68081
G01 X30.82682 Y7.73242
G01 X30.98171 Y7.85536
G01 X31.01714 Y7.88208
G01 X31.05535 Y7.90456
G01 X31.22822 Y8.00062
G01 X31.29764 Y8.03346
G01 X31.37942 Y8.06732
G01 X31.45171 Y8.09320
G01 X31.64188 Y8.14751
G01 X31.68483 Y8.15863
G01 X31.72875 Y8.16478
G01 X31.92522 Y8.18739
G01 X32.00195 Y8.19114
G01 X32.09042 Y8.19114
G01 X32.16713 Y8.18739
G01 X32.36360 Y8.16478
G01 X32.40752 Y8.15863
G01 X32.45047 Y8.14751
G01 X32.64064 Y8.09320
G01 X32.71292 Y8.06732
G01 X32.79471 Y8.03346
G01 X32.86413 Y8.00062
G01 X33.03700 Y7.90456
G01 X33.07520 Y7.88208
G01 X33.11064 Y7.85536
G01 X33.26553 Y7.73242
G01 X33.32245 Y7.68081
G01 X33.38501 Y7.61827
G01 X33.38912 Y7.61370
G01 X33.45887 Y7.54464
G01 X33.49875 Y7.50915
G01 X33.57132 Y7.45221
G01 X33.58902 Y7.43062
G01 X33.64239 Y7.35076
G01 X33.77175 Y7.10872
G01 X33.79616 Y7.04969
G01 X33.79616 Y7.01627
G01 X33.79618 Y6.72945
G01 X33.79618 Y5.25452
G01 X33.79616 Y4.96771
G01 X33.79616 Y4.93418
G01 X33.77175 Y4.87523
G01 X33.64239 Y4.63319
G01 X33.58902 Y4.55333
G01 X33.57053 Y4.53078
G01 X33.53924 Y4.50667
G01 X33.48442 Y4.46128
G01 X33.38912 Y4.37027
G01 X33.38501 Y4.36570
G01 X33.32245 Y4.30317
G01 X33.26553 Y4.25155
G01 X33.11064 Y4.12862
G01 X33.07520 Y4.10190
G01 X33.03700 Y4.07942
G01 X32.86413 Y3.98336
G01 X32.79471 Y3.95051
G01 X32.71292 Y3.91666
G01 X32.64064 Y3.89077
G01 X32.45047 Y3.83647
G01 X32.40752 Y3.82534
G01 X32.36360 Y3.81920
G01 X32.16713 Y3.79659
G01 X32.09042 Y3.79283
G01 X32.00195 Y3.79283
G01 X31.92522 Y3.79659
G01 X31.72875 Y3.81920
G01 X31.68483 Y3.82534
G01 X31.64188 Y3.83647
G01 X31.45171 Y3.89077
G01 X31.38506 Y3.91462
G01 X31.37942 Y3.91663
G01 X31.29764 Y3.95051
G01 X31.22822 Y3.98336
G01 X31.05535 Y4.07942
G01 X31.01714 Y4.10190
G01 X30.98171 Y4.12862
G01 X30.82682 Y4.25155
G01 X30.76990 Y4.30317
G01 X30.70734 Y4.36570
G01 X30.70323 Y4.37027
G01 X30.63348 Y4.43934
G01 X30.59360 Y4.47482
G01 X30.52106 Y4.53177
G01 X30.50335 Y4.55333
G01 X30.44999 Y4.63319
G01 X30.32063 Y4.87523
G01 X30.29619 Y4.93418
G01 X30.29617 Y4.96776
G01 X30.29617 Y7.01622
G01 X30.29619 Y7.04972
G01 X30.27176 Y7.10872
G01 X30.14239 Y7.35076
G01 X30.08903 Y7.43062
G01 X30.07132 Y7.45221
G01 X29.99873 Y7.50915
G01 X29.95888 Y7.54464
G01 X29.88913 Y7.61370
G01 X29.88504 Y7.61825
G01 X29.82246 Y7.68081
G01 X29.76553 Y7.73242
G01 X29.61064 Y7.85536
G01 X29.57524 Y7.88205
G01 X29.53701 Y7.90456
G01 X29.36411 Y8.00062
G01 X29.29472 Y8.03346
G01 X29.21293 Y8.06735
G01 X29.13920 Y8.09371
G01 X29.02924 Y8.13476
G01 X28.96495 Y8.16354
G01 X28.95647 Y8.16737
G01 X28.88893 Y8.19843
G01 X28.86734 Y8.20273
G01 X28.59421 Y8.22963
G01 X28.49815 Y8.22963
G01 X28.22502 Y8.20273
G01 X28.13082 Y8.18398
G01 X27.88065 Y8.10809
G01 X27.86983 Y8.09894
G01 X27.86092 Y8.09330
G01 X27.80199 Y8.05282
G01 X27.79147 Y8.04497
G01 X27.68560 Y7.97695
G01 X27.55533 Y7.90456
G01 X27.51713 Y7.88208
G01 X27.48169 Y7.85533
G01 X27.32680 Y7.73240
G01 X27.26988 Y7.68081
G01 X27.20735 Y7.61827
G01 X27.15576 Y7.56138
G01 X27.03282 Y7.40646
G01 X27.00610 Y7.37103
G01 X26.98360 Y7.33278
G01 X26.88754 Y7.15990
G01 X26.85469 Y7.09049
G01 X26.82086 Y7.00877
G01 X26.79498 Y6.93646
G01 X26.74067 Y6.74629
G01 X26.72952 Y6.70331
G01 X26.72338 Y6.65940
G01 X26.70077 Y6.46293
G01 X26.69701 Y6.38622
G01 X26.69592 Y6.34197
G01 X26.69592 Y5.64198
G01 X26.69701 Y5.59775
G01 X26.70077 Y5.52105
G01 X26.72338 Y5.32458
G01 X26.72952 Y5.28066
G01 X26.74067 Y5.23768
G01 X26.79498 Y5.04751
G01 X26.82086 Y4.97520
G01 X26.85469 Y4.89349
G01 X26.88754 Y4.82407
G01 X26.98360 Y4.65120
G01 X27.00610 Y4.61295
G01 X27.03282 Y4.57751
G01 X27.15576 Y4.42260
G01 X27.20735 Y4.36570
G01 X27.26988 Y4.30317
G01 X27.32680 Y4.25158
G01 X27.48169 Y4.12864
G01 X27.51713 Y4.10190
G01 X27.55533 Y4.07942
G01 X27.72823 Y3.98333
G01 X27.79762 Y3.95051
G01 X27.87941 Y3.91663
G01 X27.88504 Y3.91462
G01 X27.95169 Y3.89080
G01 X28.14189 Y3.83647
G01 X28.18484 Y3.82534
G01 X28.22876 Y3.81920
G01 X28.42523 Y3.79659
G01 X28.50193 Y3.79283
G01 X28.59040 Y3.79283
G01 X28.66711 Y3.79659
G01 X28.86358 Y3.81920
G01 X28.90752 Y3.82534
G01 X28.95045 Y3.83647
G01 X29.14064 Y3.89077
G01 X29.21293 Y3.91663
G01 X29.29472 Y3.95051
G01 X29.36414 Y3.98336
G01 X29.53701 Y4.07942
G01 X29.57521 Y4.10190
G01 X29.61064 Y4.12862
G01 X29.76553 Y4.25155
G01 X29.82246 Y4.30317
G01 X29.88504 Y4.36573
G01 X29.88913 Y4.37027
G01 X29.98443 Y4.46128
G01 X30.03924 Y4.50667
G01 X30.07054 Y4.53080
G01 X30.08903 Y4.55333
G01 X30.14239 Y4.63319
G01 X30.27176 Y4.87523
G01 X30.29619 Y4.93418
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.79616 Y4.93418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.36000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.79616 Y4.93418
G01 X33.82062 Y4.87523
G01 X33.94998 Y4.63319
G01 X34.00335 Y4.55333
G01 X34.02105 Y4.53177
G01 X34.09362 Y4.47482
G01 X34.13347 Y4.43934
G01 X34.20322 Y4.37027
G01 X34.20731 Y4.36573
G01 X34.26989 Y4.30317
G01 X34.32682 Y4.25155
G01 X34.48170 Y4.12862
G01 X34.51714 Y4.10190
G01 X34.55534 Y4.07942
G01 X34.72821 Y3.98336
G01 X34.79763 Y3.95051
G01 X34.87942 Y3.91663
G01 X34.88506 Y3.91462
G01 X34.95171 Y3.89077
G01 X35.14190 Y3.83647
G01 X35.18483 Y3.82534
G01 X35.22877 Y3.81920
G01 X35.42521 Y3.79659
G01 X35.50195 Y3.79283
G01 X35.59041 Y3.79283
G01 X35.66712 Y3.79659
G01 X35.86359 Y3.81920
G01 X35.90751 Y3.82534
G01 X35.95046 Y3.83647
G01 X36.14063 Y3.89077
G01 X36.21294 Y3.91666
G01 X36.29471 Y3.95051
G01 X36.36412 Y3.98336
G01 X36.53702 Y4.07942
G01 X36.57520 Y4.10190
G01 X36.61066 Y4.12864
G01 X36.76552 Y4.25158
G01 X36.82247 Y4.30317
G01 X36.88500 Y4.36570
G01 X36.93659 Y4.42262
G01 X37.05953 Y4.57751
G01 X37.08625 Y4.61295
G01 X37.10875 Y4.65120
G01 X37.20481 Y4.82407
G01 X37.23766 Y4.89349
G01 X37.27149 Y4.97520
G01 X37.29737 Y5.04751
G01 X37.35168 Y5.23768
G01 X37.36283 Y5.28066
G01 X37.36897 Y5.32458
G01 X37.39158 Y5.52105
G01 X37.39534 Y5.59775
G01 X37.39643 Y5.64198
G01 X37.39643 Y6.34197
G01 X37.39534 Y6.38622
G01 X37.39158 Y6.46293
G01 X37.36897 Y6.65940
G01 X37.36283 Y6.70331
G01 X37.35168 Y6.74629
G01 X37.29737 Y6.93646
G01 X37.27149 Y7.00877
G01 X37.23766 Y7.09049
G01 X37.20481 Y7.15993
G01 X37.11187 Y7.32716
G01 X37.10875 Y7.33278
G01 X37.08627 Y7.37100
G01 X37.05953 Y7.40646
G01 X36.93656 Y7.56135
G01 X36.88500 Y7.61827
G01 X36.82247 Y7.68081
G01 X36.76552 Y7.73242
G01 X36.61066 Y7.85533
G01 X36.57520 Y7.88208
G01 X36.53702 Y7.90456
G01 X36.36412 Y8.00062
G01 X36.29471 Y8.03346
G01 X36.21294 Y8.06732
G01 X36.14063 Y8.09320
G01 X35.95046 Y8.14751
G01 X35.90751 Y8.15863
G01 X35.86359 Y8.16478
G01 X35.66712 Y8.18739
G01 X35.59041 Y8.19114
G01 X35.50195 Y8.19114
G01 X35.42521 Y8.18739
G01 X35.22877 Y8.16478
G01 X35.18483 Y8.15863
G01 X35.14190 Y8.14751
G01 X34.95171 Y8.09320
G01 X34.87942 Y8.06735
G01 X34.79763 Y8.03346
G01 X34.72821 Y8.00062
G01 X34.55534 Y7.90456
G01 X34.51714 Y7.88208
G01 X34.48170 Y7.85536
G01 X34.32682 Y7.73242
G01 X34.26989 Y7.68081
G01 X34.20731 Y7.61825
G01 X34.20322 Y7.61370
G01 X34.10792 Y7.52269
G01 X34.05310 Y7.47730
G01 X34.02194 Y7.45327
G01 X34.00335 Y7.43062
G01 X33.94998 Y7.35076
G01 X33.82062 Y7.10872
G01 X33.79616 Y7.04969

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )