( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.98000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.69293 Y94.40709 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.69293 Y94.40709
G01 X-11.69748 Y94.35590
G01 X-11.72687 Y94.25316
G01 X-11.77490 Y94.16124
G01 X-11.84043 Y94.08085
G01 X-11.92082 Y94.01532
G01 X-12.01277 Y93.96728
G01 X-12.11551 Y93.93787
G01 X-12.16667 Y93.93332
G01 X-12.21292 Y93.93332
G01 X-12.21292 Y93.95331
G01 X-12.20294 Y93.95331
G01 X-12.10733 Y93.96274
G01 X-12.01541 Y93.99060
G01 X-11.93070 Y94.03589
G01 X-11.85646 Y94.09682
G01 X-11.79552 Y94.17109
G01 X-11.75023 Y94.25580
G01 X-11.72235 Y94.34773
G01 X-11.71295 Y94.44331
G01 X-11.71295 Y94.45331
G01 X-11.69293 Y94.45331
G01 X-11.69293 Y94.40709
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.39290 Y94.70447 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.39290 Y94.70447
G01 X-14.39293 Y94.44331
G01 X-14.38353 Y94.34773
G01 X-14.35564 Y94.25580
G01 X-14.31035 Y94.17109
G01 X-14.29412 Y94.15128
G01 X-14.24942 Y94.09682
G01 X-14.17517 Y94.03589
G01 X-14.09046 Y93.99060
G01 X-13.99854 Y93.96274
G01 X-13.90294 Y93.95331
G01 X-13.89293 Y93.95331
G01 X-13.89293 Y93.93332
G01 X-13.93918 Y93.93332
G01 X-13.99034 Y93.93787
G01 X-14.09311 Y93.96728
G01 X-14.17078 Y94.00785
G01 X-14.24147 Y94.03795
G01 X-14.31602 Y94.05667
G01 X-14.37634 Y94.06685
G01 X-14.47850 Y94.07325
G01 X-14.57979 Y94.05829
G01 X-14.67576 Y94.02261
G01 X-14.73057 Y93.99540
G01 X-14.74830 Y93.98413
G01 X-14.85584 Y93.73559
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.43288 Y94.13630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.43288 Y94.13630
G01 X-16.45581 Y94.14856
G01 X-16.54454 Y94.18532
G01 X-16.69462 Y94.23084
G01 X-16.78881 Y94.24958
G01 X-16.94492 Y94.26495
G01 X-17.04095 Y94.26495
G01 X-17.19704 Y94.24958
G01 X-17.29124 Y94.23084
G01 X-17.33961 Y94.21618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.40292 Y95.70871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.40292 Y95.70871
G01 X-19.41875 Y95.76083
G01 X-19.45550 Y95.84958
G01 X-19.53404 Y95.99654
G01 X-19.58740 Y96.07640
G01 X-19.64793 Y96.15014
G01 X-19.69312 Y96.20520
G01 X-19.76104 Y96.27312
G01 X-19.83295 Y96.33213
G01 X-19.83295 Y96.89862
G01 X-19.78039 Y96.92669
G01 X-19.70051 Y96.98008
G01 X-19.54897 Y97.10444
G01 X-19.48105 Y97.17236
G01 X-19.35670 Y97.32389
G01 X-19.31692 Y97.38336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.81692 Y97.38336 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.81692 Y97.38336
G01 X-21.85669 Y97.32389
G01 X-21.98105 Y97.17236
G01 X-22.04897 Y97.10444
G01 X-22.20051 Y96.98008
G01 X-22.28039 Y96.92669
G01 X-22.37295 Y96.87724
G01 X-22.37295 Y96.33213
G01 X-22.30104 Y96.27312
G01 X-22.23312 Y96.20520
G01 X-22.18793 Y96.15014
G01 X-22.12740 Y96.07640
G01 X-22.07404 Y95.99654
G01 X-21.99550 Y95.84958
G01 X-21.95875 Y95.76083
G01 X-21.94292 Y95.70871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.94292 Y94.87785 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.94292 Y94.87785
G01 X-21.92713 Y94.82580
G01 X-21.89037 Y94.73706
G01 X-21.81184 Y94.59009
G01 X-21.75847 Y94.51024
G01 X-21.69792 Y94.43645
G01 X-21.65275 Y94.38143
G01 X-21.58484 Y94.31349
G01 X-21.45603 Y94.20780
G01 X-21.37615 Y94.15443
G01 X-21.22921 Y94.07587
G01 X-21.14046 Y94.03912
G01 X-20.98100 Y93.99075
G01 X-20.88679 Y93.97201
G01 X-20.72096 Y93.95568
G01 X-20.62492 Y93.95568
G01 X-20.45908 Y93.97201
G01 X-20.36487 Y93.99075
G01 X-20.20541 Y94.03912
G01 X-20.11666 Y94.07587
G01 X-19.96973 Y94.15443
G01 X-19.88984 Y94.20780
G01 X-19.80343 Y94.27871
G01 X-19.76104 Y94.31349
G01 X-19.69312 Y94.38143
G01 X-19.58740 Y94.51024
G01 X-19.53404 Y94.59009
G01 X-19.45550 Y94.73706
G01 X-19.41875 Y94.82580
G01 X-19.40292 Y94.87785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.76226 Y94.00975 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.76226 Y94.00975
G01 X-17.86948 Y93.92177
G01 X-17.93740 Y93.85385
G01 X-17.96737 Y93.81732
G01 X-26.43088 Y93.81732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.34200 Y94.09362 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.34200 Y94.09362
G01 X-26.34182 Y94.09332
G01 X-26.30921 Y94.07587
G01 X-26.22046 Y94.03912
G01 X-26.06100 Y93.99075
G01 X-25.96679 Y93.97201
G01 X-25.80096 Y93.95568
G01 X-25.70492 Y93.95568
G01 X-25.53908 Y93.97201
G01 X-25.44487 Y93.99075
G01 X-25.28541 Y94.03912
G01 X-25.19666 Y94.07587
G01 X-25.04973 Y94.15443
G01 X-24.96984 Y94.20780
G01 X-24.88343 Y94.27871
G01 X-24.84104 Y94.31349
G01 X-24.77312 Y94.38143
G01 X-24.66740 Y94.51024
G01 X-24.61404 Y94.59009
G01 X-24.53550 Y94.73706
G01 X-24.49875 Y94.82580
G01 X-24.48292 Y94.87785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.48292 Y95.70871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.48292 Y95.70871
G01 X-24.49875 Y95.76083
G01 X-24.53550 Y95.84958
G01 X-24.61404 Y95.99654
G01 X-24.66740 Y96.07640
G01 X-24.72793 Y96.15014
G01 X-24.77312 Y96.20520
G01 X-24.84104 Y96.27312
G01 X-24.91295 Y96.33213
G01 X-24.91295 Y96.85585
G01 X-24.78038 Y96.92669
G01 X-24.70053 Y96.98008
G01 X-24.54899 Y97.10444
G01 X-24.48104 Y97.17236
G01 X-24.35669 Y97.32389
G01 X-24.31694 Y97.38336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.31694 Y100.43120 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.31694 Y100.43120
G01 X-24.28445 Y100.45229
G01 X-24.26550 Y100.46511
G01 X-24.20914 Y100.50034
G01 X-24.20871 Y100.50057
G01 X-24.06250 Y100.60824
G01 X-24.04780 Y100.62211
G01 X-24.03975 Y100.62958
G01 X-23.99870 Y100.66707
G01 X-23.99674 Y100.66885
G01 X-23.95679 Y100.70507
G01 X-23.84544 Y100.79346
G01 X-23.81788 Y100.81424
G01 X-23.78816 Y100.83171
G01 X-23.66388 Y100.90080
G01 X-23.61513 Y100.92384
G01 X-23.55156 Y100.95018
G01 X-23.50076 Y100.96836
G01 X-23.42855 Y100.98899
G01 X-23.36403 Y101.00740
G01 X-23.33063 Y101.01604
G01 X-23.29644 Y101.02084
G01 X-23.15519 Y101.03710
G01 X-23.10129 Y101.03974
G01 X-23.03251 Y101.03974
G01 X-22.97866 Y101.03710
G01 X-22.83741 Y101.02084
G01 X-22.80322 Y101.01604
G01 X-22.76982 Y101.00740
G01 X-22.63309 Y100.96834
G01 X-22.58229 Y100.95018
G01 X-22.51872 Y100.92384
G01 X-22.47000 Y100.90077
G01 X-22.34569 Y100.83171
G01 X-22.31595 Y100.81421
G01 X-22.28844 Y100.79343
G01 X-22.17706 Y100.70507
G01 X-22.13711 Y100.66885
G01 X-22.13515 Y100.66707
G01 X-22.08600 Y100.62219
G01 X-22.05131 Y100.59244
G01 X-22.00261 Y100.55328
G01 X-21.92672 Y100.49930
G01 X-21.85067 Y100.45155
G01 X-21.81692 Y100.43123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.31692 Y100.43123 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.31692 Y100.43123
G01 X-19.28451 Y100.45226
G01 X-19.26549 Y100.46514
G01 X-19.20912 Y100.50034
G01 X-19.20872 Y100.50057
G01 X-19.06239 Y100.60837
G01 X-19.04781 Y100.62211
G01 X-19.03963 Y100.62970
G01 X-18.99675 Y100.66885
G01 X-18.95680 Y100.70504
G01 X-18.84542 Y100.79343
G01 X-18.81786 Y100.81424
G01 X-18.78814 Y100.83174
G01 X-18.66386 Y100.90080
G01 X-18.61509 Y100.92386
G01 X-18.55154 Y100.95018
G01 X-18.50074 Y100.96836
G01 X-18.42853 Y100.98899
G01 X-18.36406 Y101.00738
G01 X-18.33064 Y101.01604
G01 X-18.29645 Y101.02084
G01 X-18.15517 Y101.03710
G01 X-18.10130 Y101.03974
G01 X-18.03254 Y101.03974
G01 X-17.97867 Y101.03710
G01 X-17.83740 Y101.02084
G01 X-17.80323 Y101.01604
G01 X-17.76978 Y101.00738
G01 X-17.63308 Y100.96834
G01 X-17.58230 Y100.95018
G01 X-17.51873 Y100.92384
G01 X-17.46998 Y100.90077
G01 X-17.34570 Y100.83171
G01 X-17.31593 Y100.81421
G01 X-17.28840 Y100.79343
G01 X-17.17705 Y100.70504
G01 X-17.13709 Y100.66885
G01 X-17.08594 Y100.62216
G01 X-17.05129 Y100.59244
G01 X-17.00257 Y100.55328
G01 X-16.92668 Y100.49928
G01 X-16.85068 Y100.45155
G01 X-16.81693 Y100.43123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.81693 Y97.38338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.81693 Y97.38338
G01 X-16.85668 Y97.32389
G01 X-16.98103 Y97.17236
G01 X-17.04898 Y97.10444
G01 X-17.20052 Y96.98008
G01 X-17.28037 Y96.92669
G01 X-17.29292 Y96.91998
G01 X-17.29292 Y96.33213
G01 X-17.22104 Y96.27312
G01 X-17.15312 Y96.20520
G01 X-17.10793 Y96.15014
G01 X-17.04740 Y96.07640
G01 X-16.99401 Y95.99654
G01 X-16.91550 Y95.84958
G01 X-16.87875 Y95.76083
G01 X-16.86292 Y95.70871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.86292 Y94.87785 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.86292 Y94.87785
G01 X-16.87875 Y94.82580
G01 X-16.91550 Y94.73706
G01 X-16.99401 Y94.59009
G01 X-17.04740 Y94.51024
G01 X-17.15312 Y94.38143
G01 X-17.22104 Y94.31349
G01 X-17.33961 Y94.21618
G01 X-17.35152 Y94.20980
G01 X-17.43656 Y94.16949
G01 X-17.43755 Y94.16909
G01 X-17.52010 Y94.13000
G01 X-17.58660 Y94.09446
G01 X-17.66008 Y94.05921
G01 X-17.67011 Y94.05489
G01 X-17.74593 Y94.01849
G01 X-17.76226 Y94.00975
G01 X-17.82487 Y93.99075
G01 X-17.91908 Y93.97201
G01 X-18.08492 Y93.95568
G01 X-18.18096 Y93.95568
G01 X-18.34679 Y93.97201
G01 X-18.44100 Y93.99075
G01 X-18.60046 Y94.03912
G01 X-18.68921 Y94.07587
G01 X-18.83615 Y94.15443
G01 X-18.91603 Y94.20780
G01 X-19.04484 Y94.31349
G01 X-19.11275 Y94.38143
G01 X-19.15792 Y94.43645
G01 X-19.21847 Y94.51024
G01 X-19.27184 Y94.59009
G01 X-19.35037 Y94.73706
G01 X-19.38713 Y94.82580
G01 X-19.40292 Y94.87785
G01 X-19.40292 Y95.70871
G01 X-19.38713 Y95.76083
G01 X-19.35037 Y95.84958
G01 X-19.27184 Y95.99654
G01 X-19.21847 Y96.07640
G01 X-19.11275 Y96.20520
G01 X-19.04484 Y96.27312
G01 X-18.97293 Y96.33213
G01 X-18.97293 Y97.01254
G01 X-19.07191 Y97.09377
G01 X-19.08489 Y97.10444
G01 X-19.15281 Y97.17236
G01 X-19.27719 Y97.32389
G01 X-19.31692 Y97.38336
G01 X-19.31692 Y100.43123
G01 X-19.35068 Y100.45155
G01 X-19.42667 Y100.49928
G01 X-19.50254 Y100.55323
G01 X-19.55126 Y100.59242
G01 X-19.58598 Y100.62216
G01 X-19.63516 Y100.66707
G01 X-19.67707 Y100.70507
G01 X-19.78842 Y100.79343
G01 X-19.81595 Y100.81421
G01 X-19.84570 Y100.83171
G01 X-19.97000 Y100.90077
G01 X-20.01875 Y100.92384
G01 X-20.08230 Y100.95018
G01 X-20.13310 Y100.96834
G01 X-20.26983 Y101.00740
G01 X-20.30323 Y101.01604
G01 X-20.33742 Y101.02084
G01 X-20.47867 Y101.03710
G01 X-20.53251 Y101.03974
G01 X-20.60130 Y101.03974
G01 X-20.65517 Y101.03710
G01 X-20.79644 Y101.02084
G01 X-20.83066 Y101.01604
G01 X-20.86403 Y101.00740
G01 X-20.92855 Y100.98899
G01 X-21.00071 Y100.96836
G01 X-21.05156 Y100.95018
G01 X-21.11514 Y100.92384
G01 X-21.16386 Y100.90080
G01 X-21.28816 Y100.83171
G01 X-21.31788 Y100.81424
G01 X-21.34541 Y100.79346
G01 X-21.45679 Y100.70507
G01 X-21.49675 Y100.66885
G01 X-21.53962 Y100.62970
G01 X-21.54780 Y100.62211
G01 X-21.56238 Y100.60837
G01 X-21.70871 Y100.50057
G01 X-21.70914 Y100.50032
G01 X-21.76553 Y100.46509
G01 X-21.78450 Y100.45226
G01 X-21.81692 Y100.43123
G01 X-21.81692 Y97.38336
G01 X-21.77719 Y97.32389
G01 X-21.65283 Y97.17236
G01 X-21.58489 Y97.10444
G01 X-21.57193 Y97.09380
G01 X-21.51293 Y97.04538
G01 X-21.51293 Y96.33213
G01 X-21.58484 Y96.27312
G01 X-21.65275 Y96.20520
G01 X-21.75847 Y96.07640
G01 X-21.81184 Y95.99654
G01 X-21.89037 Y95.84958
G01 X-21.92713 Y95.76083
G01 X-21.94292 Y95.70871
G01 X-21.94292 Y94.87785
G01 X-21.95875 Y94.82580
G01 X-21.99550 Y94.73706
G01 X-22.07404 Y94.59009
G01 X-22.12740 Y94.51024
G01 X-22.23312 Y94.38143
G01 X-22.30104 Y94.31349
G01 X-22.34343 Y94.27871
G01 X-22.42984 Y94.20780
G01 X-22.50973 Y94.15443
G01 X-22.65666 Y94.07587
G01 X-22.74541 Y94.03912
G01 X-22.90487 Y93.99075
G01 X-22.99908 Y93.97201
G01 X-23.16492 Y93.95568
G01 X-23.26096 Y93.95568
G01 X-23.42679 Y93.97201
G01 X-23.52100 Y93.99075
G01 X-23.68046 Y94.03912
G01 X-23.76921 Y94.07587
G01 X-23.91615 Y94.15443
G01 X-23.99603 Y94.20780
G01 X-24.12484 Y94.31349
G01 X-24.19275 Y94.38143
G01 X-24.23792 Y94.43645
G01 X-24.29847 Y94.51024
G01 X-24.35184 Y94.59009
G01 X-24.43037 Y94.73706
G01 X-24.46713 Y94.82580
G01 X-24.48292 Y94.87785
G01 X-24.48292 Y95.70871
G01 X-24.46713 Y95.76083
G01 X-24.43037 Y95.84958
G01 X-24.35184 Y95.99654
G01 X-24.29847 Y96.07640
G01 X-24.19275 Y96.20520
G01 X-24.12484 Y96.27312
G01 X-24.05293 Y96.33213
G01 X-24.05293 Y97.07820
G01 X-24.07193 Y97.09377
G01 X-24.08491 Y97.10444
G01 X-24.15283 Y97.17236
G01 X-24.27718 Y97.32389
G01 X-24.31694 Y97.38336
G01 X-24.31694 Y100.43120
G01 X-24.35074 Y100.45157
G01 X-24.42669 Y100.49928
G01 X-24.50261 Y100.55328
G01 X-24.55130 Y100.59244
G01 X-24.58597 Y100.62216
G01 X-24.63515 Y100.66707
G01 X-24.63710 Y100.66885
G01 X-24.67706 Y100.70507
G01 X-24.78844 Y100.79343
G01 X-24.81594 Y100.81421
G01 X-24.84569 Y100.83171
G01 X-24.96999 Y100.90077
G01 X-25.01871 Y100.92384
G01 X-25.08229 Y100.95018
G01 X-25.13309 Y100.96834
G01 X-25.26982 Y101.00738
G01 X-25.30322 Y101.01604
G01 X-25.33741 Y101.02084
G01 X-25.47868 Y101.03710
G01 X-25.53255 Y101.03974
G01 X-25.60134 Y101.03974
G01 X-25.65519 Y101.03710
G01 X-25.79643 Y101.02084
G01 X-25.83065 Y101.01604
G01 X-25.86402 Y101.00740
G01 X-25.92854 Y100.98899
G01 X-26.00075 Y100.96836
G01 X-26.05155 Y100.95018
G01 X-26.11510 Y100.92386
G01 X-26.16387 Y100.90080
G01 X-26.28815 Y100.83174
G01 X-26.31787 Y100.81424
G01 X-26.34543 Y100.79343
G01 X-26.45681 Y100.70507
G01 X-26.49676 Y100.66885
G01 X-26.54543 Y100.62015
G01 X-26.58165 Y100.58023
G01 X-26.67004 Y100.46882
G01 X-26.69082 Y100.44129
G01 X-26.70832 Y100.41154
G01 X-26.77738 Y100.28726
G01 X-26.80045 Y100.23849
G01 X-26.82511 Y100.17952
G01 X-26.82679 Y100.17492
G01 X-26.84497 Y100.12412
G01 X-26.88399 Y99.98741
G01 X-26.89265 Y99.95404
G01 X-26.89742 Y99.91988
G01 X-26.91368 Y99.77860
G01 X-26.91632 Y99.72475
G01 X-26.91716 Y99.69031
G01 X-26.91716 Y98.19034
G01 X-26.91632 Y98.15590
G01 X-26.91368 Y98.10205
G01 X-26.89742 Y97.96077
G01 X-26.89265 Y97.92661
G01 X-26.88399 Y97.89324
G01 X-26.84495 Y97.75651
G01 X-26.82679 Y97.70573
G01 X-26.82435 Y97.69903
G01 X-26.80045 Y97.64216
G01 X-26.77743 Y97.59349
G01 X-26.70832 Y97.46911
G01 X-26.69082 Y97.43936
G01 X-26.67004 Y97.41183
G01 X-26.58155 Y97.30032
G01 X-26.56423 Y97.28041
G01 X-26.55424 Y97.26852
G01 X-26.54675 Y97.25940
G01 X-26.50253 Y97.20479
G01 X-26.47403 Y97.16725
G01 X-26.47164 Y97.15303
G01 X-26.46197 Y97.09184
G01 X-26.45318 Y96.98094
G01 X-26.45318 Y96.48079
G01 X-26.45437 Y96.43977
G01 X-26.45574 Y96.41648
G01 X-26.47759 Y96.27759
G01 X-26.48950 Y96.26360
G01 X-26.53027 Y96.21681
G01 X-26.57784 Y96.16718
G01 X-26.60235 Y96.14399
G01 X-26.62577 Y96.11739
G01 X-26.72463 Y95.99931
G01 X-26.73197 Y95.98900
G01 X-26.76910 Y95.93098
G01 X-26.81871 Y95.84445
G01 X-26.82232 Y95.83812
G01 X-26.84787 Y95.78412
G01 X-26.87421 Y95.72049
G01 X-26.89435 Y95.66421
G01 X-26.92237 Y95.56098
G01 X-26.93715 Y95.49367
G01 X-26.93923 Y95.48123
G01 X-26.95282 Y95.32778
G01 X-26.95503 Y95.29332
G01 X-26.95282 Y95.25887
G01 X-26.93923 Y95.10543
G01 X-26.93715 Y95.09296
G01 X-26.92237 Y95.02565
G01 X-26.89435 Y94.92245
G01 X-26.87421 Y94.86614
G01 X-26.84784 Y94.80249
G01 X-26.82229 Y94.74846
G01 X-26.76910 Y94.65565
G01 X-26.73197 Y94.59766
G01 X-26.72463 Y94.58735
G01 X-26.62577 Y94.46926
G01 X-26.58137 Y94.42098
G01 X-26.57875 Y94.41839
G01 X-26.53321 Y94.36883
G01 X-26.50796 Y94.33868
G01 X-26.46953 Y94.28875
G01 X-26.42100 Y94.22014
G01 X-26.38018 Y94.15740
G01 X-26.34350 Y94.09622
G01 X-26.34200 Y94.09362
G01 X-26.35244 Y93.99436
G01 X-26.38409 Y93.89693
G01 X-26.42956 Y93.81816
G01 X-26.43088 Y93.81732
G01 X-26.43994 Y93.81161
G01 X-26.50116 Y93.78042
G01 X-26.75381 Y93.69604
G01 X-26.81500 Y93.68636
G01 X-26.92587 Y93.67757
G01 X-32.77580 Y93.67757
G01 X-32.80330 Y93.67813
G01 X-32.81885 Y93.67874
G01 X-32.95382 Y93.69703
G01 X-32.95873 Y93.70056
G01 X-33.00884 Y93.73698
G01 X-33.09345 Y93.80917
G01 X-33.55710 Y94.27280
G01 X-33.57623 Y94.29268
G01 X-33.58677 Y94.30411
G01 X-33.66924 Y94.41242
G01 X-33.67021 Y94.41839
G01 X-33.67988 Y94.47958
G01 X-33.68867 Y94.59045
G01 X-33.68867 Y98.05130
G01 X-33.68951 Y98.08574
G01 X-33.69121 Y98.12003
G01 X-33.69624 Y98.15404
G01 X-33.70968 Y98.22151
G01 X-33.71803 Y98.25483
G01 X-33.72959 Y98.28716
G01 X-33.75593 Y98.35077
G01 X-33.77061 Y98.38183
G01 X-33.78824 Y98.41127
G01 X-33.82652 Y98.46855
G01 X-33.84696 Y98.49610
G01 X-33.87005 Y98.52158
G01 X-33.89378 Y98.54647
G01 X-34.78476 Y99.43748
G01 X-34.80968 Y99.46118
G01 X-34.83515 Y99.48427
G01 X-34.86271 Y99.50471
G01 X-34.91999 Y99.54299
G01 X-34.94945 Y99.56064
G01 X-34.98049 Y99.57533
G01 X-34.99418 Y99.58162
G01 X-35.04346 Y99.60365
G01 X-35.06169 Y99.61213
G01 X-35.09924 Y99.63016
G01 X-35.10609 Y99.63352
G01 X-35.17401 Y99.66707
G01 X-35.20203 Y99.68157
G01 X-35.20574 Y99.69234
G01 X-35.21829 Y99.72966
G01 X-35.23017 Y99.76837
G01 X-35.24683 Y99.82818
G01 X-35.26634 Y99.92191
G01 X-35.26858 Y99.93801
G01 X-35.27132 Y99.95600
G01 X-35.27998 Y99.98942
G01 X-35.31902 Y100.12615
G01 X-35.33718 Y100.17692
G01 X-35.36352 Y100.24050
G01 X-35.38659 Y100.28924
G01 X-35.45565 Y100.41355
G01 X-35.47315 Y100.44329
G01 X-35.49393 Y100.47083
G01 X-35.58232 Y100.58223
G01 X-35.61851 Y100.62216
G01 X-35.66720 Y100.67085
G01 X-35.70713 Y100.70705
G01 X-35.81854 Y100.79544
G01 X-35.84607 Y100.81622
G01 X-35.87582 Y100.83372
G01 X-36.00012 Y100.90278
G01 X-36.04887 Y100.92584
G01 X-36.11247 Y100.95218
G01 X-36.16322 Y100.97034
G01 X-36.29997 Y101.00938
G01 X-36.33335 Y101.01805
G01 X-36.36748 Y101.02282
G01 X-36.50878 Y101.03908
G01 X-36.56261 Y101.04174
G01 X-36.63147 Y101.04174
G01 X-36.68529 Y101.03910
G01 X-36.82659 Y101.02282
G01 X-36.86073 Y101.01805
G01 X-36.89413 Y101.00938
G01 X-36.95867 Y100.99097
G01 X-37.03088 Y100.97034
G01 X-37.08163 Y100.95218
G01 X-37.14526 Y100.92584
G01 X-37.19395 Y100.90281
G01 X-37.31826 Y100.83372
G01 X-37.34802 Y100.81622
G01 X-37.37553 Y100.79544
G01 X-37.48691 Y100.70705
G01 X-37.52687 Y100.67085
G01 X-37.52887 Y100.66902
G01 X-37.56956 Y100.63186
G01 X-37.57792 Y100.62412
G01 X-37.59232 Y100.61053
G01 X-37.73883 Y100.50258
G01 X-37.73941 Y100.50222
G01 X-37.79580 Y100.46699
G01 X-37.81457 Y100.45429
G01 X-37.84703 Y100.43324
G01 X-37.84703 Y97.97073
G01 X-37.84706 Y97.91559
G01 X-37.84703 Y97.71074
G01 X-37.84703 Y97.38536
G01 X-37.80731 Y97.32590
G01 X-37.68295 Y97.17436
G01 X-37.61500 Y97.10642
G01 X-37.46697 Y96.98496
G01 X-37.46111 Y96.98496
G01 X-37.35082 Y96.99016
G01 X-37.29560 Y96.99560
G01 X-37.21175 Y96.99984
G01 X-37.12334 Y96.99984
G01 X-37.06027 Y97.00286
G01 X-37.03677 Y97.00520
G01 X-36.98280 Y97.00789
G01 X-36.85389 Y97.00789
G01 X-36.81932 Y97.00926
G01 X-36.81198 Y97.00985
G01 X-36.77952 Y97.01117
G01 X-36.62197 Y97.01117
G01 X-36.61488 Y97.01109
G01 X-36.58620 Y97.01056
G01 X-36.57914 Y97.01048
G01 X-36.42862 Y97.01048
G01 X-36.38895 Y97.00853
G01 X-36.38191 Y97.00782
G01 X-36.33957 Y97.00576
G01 X-36.22590 Y97.00576
G01 X-36.17244 Y97.00309
G01 X-36.13271 Y96.99918
G01 X-36.06878 Y96.99611
G01 X-35.99834 Y96.99611
G01 X-35.91552 Y96.99192
G01 X-35.84026 Y96.98450
G01 X-35.73446 Y96.97950
G01 X-35.72753 Y96.97378
G01 X-35.65958 Y96.90586
G01 X-35.56009 Y96.78463
G01 X-35.50673 Y96.70474
G01 X-35.43281 Y96.56644
G01 X-35.39606 Y96.47769
G01 X-35.35052 Y96.32763
G01 X-35.33180 Y96.23342
G01 X-35.31641 Y96.07734
G01 X-35.31641 Y95.98128
G01 X-35.33180 Y95.82522
G01 X-35.35052 Y95.73101
G01 X-35.39606 Y95.58092
G01 X-35.43281 Y95.49217
G01 X-35.50673 Y95.35387
G01 X-35.56009 Y95.27401
G01 X-35.65958 Y95.15278
G01 X-35.72753 Y95.08486
G01 X-35.76406 Y95.05486
G01 X-35.76406 Y93.95575
G01 X-35.72753 Y93.92578
G01 X-35.67622 Y93.87447
G01 X-35.65958 Y93.85786
G01 X-35.56009 Y93.73663
G01 X-35.50673 Y93.65674
G01 X-35.43281 Y93.51844
G01 X-35.39606 Y93.42969
G01 X-35.35052 Y93.27963
G01 X-35.33180 Y93.18542
G01 X-35.31641 Y93.02934
G01 X-35.31641 Y92.93328
G01 X-35.32105 Y92.88626
G01 X-34.85209 Y92.41733
G01 X-33.87983 Y92.41733
G01 X-33.83180 Y92.39744
G01 X-33.78661 Y92.37999
G01 X-33.71798 Y92.35543
G01 X-33.63645 Y92.33064
G01 X-33.56784 Y92.31347
G01 X-33.49363 Y92.29866
G01 X-33.42502 Y92.28850
G01 X-33.35497 Y92.28156
G01 X-33.28636 Y92.27818
G01 X-33.25192 Y92.27735
G01 X-17.90117 Y92.27735
G01 X-17.78761 Y92.22365
G01 X-17.73191 Y92.20049
G01 X-17.57504 Y92.14438
G01 X-17.53379 Y92.13183
G01 X-17.37697 Y92.09254
G01 X-17.34519 Y92.08621
G01 X-17.18835 Y92.06295
G01 X-17.16203 Y92.06035
G01 X-17.00522 Y92.05263
G01 X-16.98063 Y92.05263
G01 X-16.82381 Y92.06035
G01 X-16.79749 Y92.06295
G01 X-16.64065 Y92.08621
G01 X-16.60892 Y92.09254
G01 X-16.45205 Y92.13183
G01 X-16.41073 Y92.14440
G01 X-16.25393 Y92.20051
G01 X-16.22658 Y92.21105
G01 X-16.21609 Y92.23833
G01 X-16.15998 Y92.39513
G01 X-16.14741 Y92.43645
G01 X-16.10811 Y92.59330
G01 X-16.10179 Y92.62507
G01 X-16.07850 Y92.78189
G01 X-16.07591 Y92.80821
G01 X-16.06821 Y92.96505
G01 X-16.06821 Y92.98961
G01 X-16.07591 Y93.14643
G01 X-16.07850 Y93.17275
G01 X-16.10179 Y93.32959
G01 X-16.10811 Y93.36137
G01 X-16.14741 Y93.51821
G01 X-16.15993 Y93.55949
G01 X-16.21609 Y93.71631
G01 X-16.23923 Y93.77206
G01 X-16.31340 Y93.92888
G01 X-16.35449 Y94.00551
G01 X-16.43288 Y94.13630
G01 X-16.43290 Y94.25448
G01 X-16.50484 Y94.31349
G01 X-16.57275 Y94.38143
G01 X-16.67847 Y94.51024
G01 X-16.73184 Y94.59009
G01 X-16.81035 Y94.73706
G01 X-16.84713 Y94.82580
G01 X-16.86292 Y94.87785
G01 X-16.86292 Y95.70871
G01 X-16.84713 Y95.76083
G01 X-16.81035 Y95.84958
G01 X-16.73184 Y95.99654
G01 X-16.67847 Y96.07640
G01 X-16.57275 Y96.20520
G01 X-16.50484 Y96.27312
G01 X-16.43290 Y96.33215
G01 X-16.43290 Y96.97978
G01 X-16.43333 Y96.98008
G01 X-16.57189 Y97.09380
G01 X-16.58487 Y97.10444
G01 X-16.65282 Y97.17236
G01 X-16.77717 Y97.32389
G01 X-16.81693 Y97.38338
G01 X-16.81693 Y100.43123
G01 X-16.78451 Y100.45226
G01 X-16.76549 Y100.46514
G01 X-16.70913 Y100.50034
G01 X-16.70872 Y100.50057
G01 X-16.56252 Y100.60824
G01 X-16.54781 Y100.62211
G01 X-16.53973 Y100.62960
G01 X-16.49869 Y100.66707
G01 X-16.45678 Y100.70507
G01 X-16.34542 Y100.79343
G01 X-16.31784 Y100.81424
G01 X-16.28815 Y100.83174
G01 X-16.16387 Y100.90080
G01 X-16.11510 Y100.92386
G01 X-16.05155 Y100.95018
G01 X-16.00075 Y100.96834
G01 X-15.92848 Y100.98899
G01 X-15.86407 Y101.00738
G01 X-15.83064 Y101.01604
G01 X-15.79645 Y101.02084
G01 X-15.65515 Y101.03710
G01 X-15.60131 Y101.03974
G01 X-15.53255 Y101.03974
G01 X-15.47868 Y101.03710
G01 X-15.33740 Y101.02084
G01 X-15.30324 Y101.01604
G01 X-15.26979 Y101.00738
G01 X-15.13311 Y100.96834
G01 X-15.08231 Y100.95018
G01 X-15.01876 Y100.92384
G01 X-14.96999 Y100.90077
G01 X-14.84571 Y100.83174
G01 X-14.81518 Y100.81373
G01 X-14.78757 Y100.79447
G01 X-14.72945 Y100.75795
G01 X-14.67537 Y100.72742
G01 X-14.61439 Y100.69648
G01 X-14.53776 Y100.66173
G01 X-14.41409 Y100.61528
G01 X-14.40156 Y100.61142
G01 X-14.35335 Y100.62569
G01 X-14.26146 Y100.66341
G01 X-14.17906 Y100.71888
G01 X-14.16514 Y100.73047
G01 X-14.13936 Y100.75399
G01 X-14.13207 Y100.76062
G01 X-14.06468 Y100.82803
G01 X-13.96524 Y100.90433
G01 X-13.92773 Y100.90433
G01 X-13.93336 Y100.90054
G01 X-14.08490 Y100.77619
G01 X-14.15282 Y100.70827
G01 X-14.27718 Y100.55673
G01 X-14.31693 Y100.49722
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.40156 Y100.61142 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.40156 Y100.61142
G01 X-14.35668 Y100.55673
G01 X-14.31693 Y100.49722
G01 X-14.31693 Y97.38338
G01 X-14.35668 Y97.32389
G01 X-14.48106 Y97.17236
G01 X-14.54898 Y97.10444
G01 X-14.70052 Y96.98008
G01 X-14.75292 Y96.94505
G01 X-14.75292 Y96.33210
G01 X-14.68104 Y96.27312
G01 X-14.61312 Y96.20520
G01 X-14.50740 Y96.07640
G01 X-14.45404 Y95.99654
G01 X-14.39290 Y95.88214
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.55694 Y98.09136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.55694 Y98.09136
G01 X-11.55694 Y98.10032
G01 X-11.58343 Y98.10032
G01 X-11.59852 Y97.94719
G01 X-11.61724 Y97.85298
G01 X-11.67416 Y97.66540
G01 X-11.71092 Y97.57665
G01 X-11.80332 Y97.40375
G01 X-11.85669 Y97.32389
G01 X-11.98104 Y97.17236
G01 X-12.04899 Y97.10444
G01 X-12.20053 Y96.98008
G01 X-12.21292 Y96.97177
G01 X-12.21292 Y96.63332
G01 X-12.20294 Y96.63332
G01 X-12.10733 Y96.62390
G01 X-12.01541 Y96.59601
G01 X-11.93070 Y96.55074
G01 X-11.85646 Y96.48978
G01 X-11.79552 Y96.41554
G01 X-11.75023 Y96.33083
G01 X-11.72235 Y96.23891
G01 X-11.71295 Y96.14330
G01 X-11.71295 Y96.13332
G01 X-11.69293 Y96.13332
G01 X-11.69293 Y96.17957
G01 X-11.69748 Y96.23076
G01 X-11.72687 Y96.33350
G01 X-11.77487 Y96.42542
G01 X-11.86321 Y96.53375
G01 X-11.87490 Y96.54866
G01 X-11.87977 Y96.55514
G01 X-11.92593 Y96.62943
G01 X-11.95816 Y96.71074
G01 X-11.97553 Y96.76941
G01 X-11.99418 Y96.87012
G01 X-11.99151 Y96.97249
G01 X-11.96761 Y97.07208
G01 X-11.94719 Y97.12976
G01 X-11.91589 Y97.20004
G01 X-11.87398 Y97.26456
G01 X-11.80871 Y97.34962
G01 X-11.70975 Y97.52105
G01 X-11.63398 Y97.70390
G01 X-11.58277 Y97.89512
G01 X-11.55694 Y98.09136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.55694 Y99.78033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.55694 Y99.78033
G01 X-11.55694 Y99.78929
G01 X-11.58277 Y99.98554
G01 X-11.63398 Y100.17675
G01 X-11.70975 Y100.35960
G01 X-11.80871 Y100.53103
G01 X-11.92920 Y100.68805
G01 X-12.06918 Y100.82803
G01 X-12.16860 Y100.90433
G01 X-12.20614 Y100.90433
G01 X-12.20053 Y100.90054
G01 X-12.04899 Y100.77619
G01 X-11.98104 Y100.70827
G01 X-11.85669 Y100.55673
G01 X-11.80332 Y100.47687
G01 X-11.71092 Y100.30398
G01 X-11.67416 Y100.21523
G01 X-11.61724 Y100.02765
G01 X-11.59852 Y99.93344
G01 X-11.58343 Y99.78033
G01 X-11.55694 Y99.78033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.31693 Y97.38338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.31693 Y97.38338
G01 X-14.27718 Y97.32389
G01 X-14.15282 Y97.17236
G01 X-14.08490 Y97.10444
G01 X-14.07192 Y97.09380
G01 X-13.93336 Y96.98008
G01 X-13.90692 Y96.96240
G01 X-13.90692 Y96.63291
G01 X-13.99854 Y96.62390
G01 X-14.09046 Y96.59601
G01 X-14.17517 Y96.55074
G01 X-14.24942 Y96.48978
G01 X-14.31035 Y96.41554
G01 X-14.35564 Y96.33083
G01 X-14.38353 Y96.23891
G01 X-14.39293 Y96.14330
G01 X-14.39290 Y95.88214
G01 X-14.38366 Y95.84523
G01 X-14.36522 Y95.75278
G01 X-14.34050 Y95.58613
G01 X-14.33212 Y95.50122
G01 X-14.32394 Y95.33459
G01 X-14.32394 Y95.25207
G01 X-14.33212 Y95.08542
G01 X-14.34050 Y95.00051
G01 X-14.36522 Y94.83386
G01 X-14.38366 Y94.74135
G01 X-14.39290 Y94.70447
G01 X-14.45404 Y94.59009
G01 X-14.50740 Y94.51024
G01 X-14.61312 Y94.38143
G01 X-14.68104 Y94.31349
G01 X-14.75292 Y94.25451
G01 X-14.75292 Y93.97348
G01 X-14.85584 Y93.73559
G01 X-14.87085 Y93.67440
G01 X-14.89138 Y93.53142
G01 X-14.89206 Y93.51491
G01 X-14.89267 Y93.48575
G01 X-14.89267 Y91.03747
G01 X-14.88388 Y90.92657
G01 X-14.87421 Y90.86539
G01 X-14.87324 Y90.85944
G01 X-14.79077 Y90.75111
G01 X-14.78020 Y90.73971
G01 X-14.76107 Y90.71979
G01 X-13.21444 Y89.17316
G01 X-13.12984 Y89.10097
G01 X-13.07972 Y89.06455
G01 X-13.06176 Y89.05190
G01 X-12.95757 Y89.04278
G01 X-12.93984 Y89.04253
G01 X-12.92430 Y89.04212
G01 X-12.89677 Y89.04108
G01 X-12.88846 Y89.04073
G01 X-12.82791 Y89.03775
G01 X-12.73243 Y89.02508
G01 X-12.66474 Y89.01271
G01 X-12.64040 Y89.00702
G01 X-12.51488 Y88.96646
G01 X-12.46022 Y88.94624
G01 X-12.45067 Y88.94121
G01 X-12.31257 Y88.86694
G01 X-12.29275 Y88.85586
G01 X-12.25557 Y88.82810
G01 X-12.14322 Y88.73829
G01 X-12.13375 Y88.72935
G01 X-12.08600 Y88.67961
G01 X-12.01503 Y88.59798
G01 X-11.98618 Y88.55863
G01 X-11.94823 Y88.50120
G01 X-11.91127 Y88.43880
G01 X-11.87439 Y88.36285
G01 X-11.84739 Y88.29953
G01 X-11.83459 Y88.26491
G01 X-11.82687 Y88.23710
G01 X-11.80243 Y88.14926
G01 X-11.78724 Y88.08200
G01 X-11.78706 Y88.08089
G01 X-11.77297 Y87.92582
G01 X-11.77071 Y87.89133
G01 X-11.77299 Y87.85681
G01 X-11.78706 Y87.70174
G01 X-11.78724 Y87.70062
G01 X-11.80182 Y87.63555
G01 X-11.80243 Y87.63339
G01 X-11.83461 Y87.51772
G01 X-11.84739 Y87.48312
G01 X-11.87439 Y87.41980
G01 X-11.91127 Y87.34385
G01 X-11.94823 Y87.28145
G01 X-11.98618 Y87.22402
G01 X-12.01503 Y87.18467
G01 X-12.06634 Y87.12564
G01 X-12.08600 Y87.10304
G01 X-12.10418 Y87.08292
G01 X-12.13294 Y87.05234
G01 X-12.17916 Y86.99803
G01 X-12.19928 Y86.97192
G01 X-12.20563 Y86.94284
G01 X-12.22204 Y86.81002
G01 X-12.22237 Y86.79859
G01 X-12.22265 Y86.77837
G01 X-12.22265 Y85.99280
G01 X-12.21389 Y85.88193
G01 X-12.20421 Y85.82074
G01 X-12.18821 Y85.74497
G01 X-12.14678 Y85.69953
G01 X-12.09504 Y85.64718
G01 X-12.07581 Y85.62844
G01 X-12.03093 Y85.58612
G01 X-12.02504 Y85.58064
G01 X-11.85958 Y85.54820
G01 X-11.82859 Y85.54576
G01 X-11.77340 Y85.54358
G01 X-10.71003 Y85.54358
G01 X-10.59913 Y85.55237
G01 X-10.53794 Y85.56204
G01 X-10.37782 Y85.60522
G01 X-10.34508 Y85.68988
G01 X-10.34396 Y85.69331
G01 X-10.32324 Y85.74962
G01 X-10.28813 Y85.83443
G01 X-10.24264 Y85.91010
G01 X-10.18270 Y85.97004
G01 X-10.11021 Y86.01388
G01 X-10.02408 Y86.04035
G01 X-10.00658 Y86.04241
G01 X-9.96591 Y86.04358
G01 X-8.26591 Y86.04358
G01 X-8.22527 Y86.04241
G01 X-8.20777 Y86.04035
G01 X-8.12164 Y86.01388
G01 X-8.04915 Y85.97004
G01 X-7.98921 Y85.91010
G01 X-7.94537 Y85.83761
G01 X-7.91890 Y85.75148
G01 X-7.91684 Y85.73398
G01 X-7.91567 Y85.69334
G01 X-7.91567 Y83.99331
G01 X-7.91684 Y83.95267
G01 X-7.91890 Y83.93517
G01 X-7.94537 Y83.84904
G01 X-7.98921 Y83.77655
G01 X-8.04915 Y83.71661
G01 X-8.12164 Y83.67277
G01 X-8.20777 Y83.64630
G01 X-8.22527 Y83.64424
G01 X-8.26591 Y83.64307
G01 X-9.96591 Y83.64307
G01 X-10.00658 Y83.64424
G01 X-10.02408 Y83.64630
G01 X-10.11021 Y83.67277
G01 X-10.18270 Y83.71661
G01 X-10.24264 Y83.77655
G01 X-10.28836 Y83.85267
G01 X-10.32121 Y83.93164
G01 X-10.34305 Y83.99116
G01 X-10.34376 Y83.99331
G01 X-10.37777 Y84.08148
G01 X-10.53236 Y84.12351
G01 X-10.59354 Y84.13360
G01 X-10.70883 Y84.14307
G01 X-11.77340 Y84.14307
G01 X-11.88430 Y84.13428
G01 X-11.94548 Y84.12461
G01 X-12.02572 Y84.10744
G01 X-12.09557 Y84.03990
G01 X-12.13621 Y83.99522
G01 X-12.14536 Y83.98536
G01 X-12.17843 Y83.95026
G01 X-12.18696 Y83.94109
G01 X-12.21805 Y83.78001
G01 X-12.22049 Y83.74904
G01 X-12.22265 Y83.69382
G01 X-12.22265 Y83.30487
G01 X-12.21389 Y83.19398
G01 X-12.20421 Y83.13279
G01 X-12.20055 Y83.11168
G01 X-12.13601 Y83.03424
G01 X-12.12085 Y83.01844
G01 X-12.11023 Y83.00708
G01 X-12.09156 Y82.98674
G01 X-12.05130 Y82.94231
G01 X-11.98953 Y82.86235
G01 X-11.95011 Y82.80579
G01 X-11.94444 Y82.79677
G01 X-11.87680 Y82.66716
G01 X-11.86159 Y82.63617
G01 X-11.85044 Y82.60350
G01 X-11.80662 Y82.46403
G01 X-11.80424 Y82.45362
G01 X-11.79214 Y82.38582
G01 X-11.77927 Y82.28560
G01 X-11.77652 Y82.22979
G01 X-11.77566 Y82.19535
G01 X-11.77566 Y81.39530
G01 X-11.77652 Y81.36086
G01 X-11.77927 Y81.30505
G01 X-11.79214 Y81.20483
G01 X-11.80424 Y81.13703
G01 X-11.80662 Y81.12662
G01 X-11.85044 Y80.98715
G01 X-11.86159 Y80.95446
G01 X-11.87680 Y80.92350
G01 X-11.93759 Y80.80701
G01 X-11.94442 Y80.79390
G01 X-11.95011 Y80.78486
G01 X-11.98953 Y80.72830
G01 X-12.05130 Y80.64834
G01 X-12.08884 Y80.60691
G01 X-12.13751 Y80.55824
G01 X-12.17891 Y80.52070
G01 X-12.25890 Y80.45893
G01 X-12.31546 Y80.41951
G01 X-12.32448 Y80.41387
G01 X-12.45409 Y80.34620
G01 X-12.48508 Y80.33099
G01 X-12.51775 Y80.31984
G01 X-12.65722 Y80.27602
G01 X-12.66763 Y80.27364
G01 X-12.73542 Y80.26155
G01 X-12.83565 Y80.24867
G01 X-12.89148 Y80.24593
G01 X-12.96039 Y80.24593
G01 X-13.01620 Y80.24867
G01 X-13.11642 Y80.26155
G01 X-13.18422 Y80.27364
G01 X-13.19463 Y80.27602
G01 X-13.33410 Y80.31984
G01 X-13.36677 Y80.33099
G01 X-13.39775 Y80.34620
G01 X-13.52737 Y80.41387
G01 X-13.53639 Y80.41951
G01 X-13.59295 Y80.45893
G01 X-13.67294 Y80.52070
G01 X-13.71434 Y80.55824
G01 X-13.76301 Y80.60691
G01 X-13.80055 Y80.64831
G01 X-13.83072 Y80.68740
G01 X-13.86379 Y80.72710
G01 X-13.90405 Y80.77198
G01 X-13.91104 Y80.77988
G01 X-13.94535 Y80.81925
G01 X-14.02371 Y80.89749
G01 X-14.09417 Y80.95903
G01 X-14.11848 Y80.97960
G01 X-14.16534 Y80.98080
G01 X-14.22651 Y80.98080
G01 X-14.27337 Y80.97960
G01 X-14.29768 Y80.95903
G01 X-14.36814 Y80.89749
G01 X-14.44650 Y80.81925
G01 X-14.48081 Y80.77988
G01 X-14.48780 Y80.77198
G01 X-14.52805 Y80.72710
G01 X-14.56113 Y80.68740
G01 X-14.59130 Y80.64831
G01 X-14.62884 Y80.60691
G01 X-14.67751 Y80.55824
G01 X-14.71891 Y80.52070
G01 X-14.79890 Y80.45893
G01 X-14.85546 Y80.41951
G01 X-14.86448 Y80.41387
G01 X-14.99409 Y80.34620
G01 X-15.02508 Y80.33099
G01 X-15.05775 Y80.31984
G01 X-15.19722 Y80.27602
G01 X-15.20763 Y80.27364
G01 X-15.27542 Y80.26155
G01 X-15.37565 Y80.24867
G01 X-15.43146 Y80.24593
G01 X-15.50037 Y80.24593
G01 X-15.58579 Y80.25012
G01 X-15.65757 Y80.25007
G01 X-15.70057 Y80.24788
G01 X-15.72907 Y80.24697
G01 X-15.75868 Y80.22878
G01 X-15.87215 Y80.14316
G01 X-15.88353 Y80.13262
G01 X-15.90344 Y80.11349
G01 X-16.62175 Y79.39523
G01 X-16.64662 Y79.37150
G01 X-16.67212 Y79.34839
G01 X-16.69968 Y79.32794
G01 X-16.71525 Y79.31674
G01 X-16.75693 Y79.28967
G01 X-16.78637 Y79.27209
G01 X-16.81746 Y79.25736
G01 X-16.88103 Y79.23102
G01 X-16.91345 Y79.21944
G01 X-16.94672 Y79.21110
G01 X-17.01418 Y79.19767
G01 X-17.04824 Y79.19261
G01 X-17.08246 Y79.19094
G01 X-17.11690 Y79.19010
G01 X-22.75395 Y79.19010
G01 X-22.86484 Y79.18131
G01 X-22.92601 Y79.17163
G01 X-22.98407 Y79.16010
G01 X-23.49286 Y79.16010
G01 X-23.51907 Y79.17953
G01 X-23.58531 Y79.22393
G01 X-23.61473 Y79.24158
G01 X-23.67015 Y79.27128
G01 X-23.69956 Y79.28520
G01 X-23.74759 Y79.30516
G01 X-23.77701 Y79.31568
G01 X-23.81993 Y79.32873
G01 X-23.84935 Y79.33610
G01 X-23.88851 Y79.34390
G01 X-23.91793 Y79.34826
G01 X-23.95511 Y79.35192
G01 X-23.98453 Y79.35339
G01 X-24.00294 Y79.35385
G01 X-24.30294 Y79.35385
G01 X-24.32133 Y79.35339
G01 X-24.35074 Y79.35192
G01 X-24.36885 Y79.35060
G01 X-24.38574 Y79.34108
G01 X-24.41175 Y79.32545
G01 X-24.44058 Y79.30623
G01 X-24.46446 Y79.28855
G01 X-24.48960 Y79.26790
G01 X-24.51142 Y79.24811
G01 X-24.53380 Y79.22576
G01 X-24.55356 Y79.20392
G01 X-24.57406 Y79.17895
G01 X-24.59176 Y79.15507
G01 X-24.61104 Y79.12619
G01 X-24.62664 Y79.10021
G01 X-24.64503 Y79.06574
G01 X-24.65839 Y79.03744
G01 X-24.66730 Y79.01733
G01 X-24.80309 Y78.68951
G01 X-24.81704 Y78.66716
G01 X-24.85341 Y78.60648
G01 X-24.89047 Y78.53696
G01 X-24.92166 Y78.47107
G01 X-24.95719 Y78.38505
G01 X-24.98275 Y78.31357
G01 X-24.98341 Y78.31139
G01 X-24.96509 Y78.21928
G01 X-24.94518 Y78.15363
G01 X-24.94294 Y78.14824
G01 X-24.94294 Y77.84235
G01 X-24.94058 Y77.79429
G01 X-24.93936 Y77.78195
G01 X-24.93903 Y77.78162
G01 X-24.92308 Y77.76668
G01 X-24.90782 Y77.75198
G01 X-24.88076 Y77.72665
G01 X-24.84406 Y77.69345
G01 X-24.81932 Y77.67026
G01 X-24.81071 Y77.66188
G01 X-24.78678 Y77.63945
G01 X-24.75951 Y77.61489
G01 X-24.73687 Y77.59363
G01 X-24.73113 Y77.58802
G01 X-24.70893 Y77.56722
G01 X-24.68630 Y77.54687
G01 X-24.66469 Y77.52658
G01 X-24.66014 Y77.52211
G01 X-24.63865 Y77.50194
G01 X-24.61721 Y77.48271
G01 X-24.59573 Y77.46254
G01 X-24.59133 Y77.45822
G01 X-24.56972 Y77.43793
G01 X-24.54663 Y77.41718
G01 X-24.52443 Y77.39635
G01 X-24.51897 Y77.39102
G01 X-24.49634 Y77.36978
G01 X-24.46906 Y77.34519
G01 X-24.44513 Y77.32279
G01 X-24.43649 Y77.31438
G01 X-24.41175 Y77.29119
G01 X-24.37543 Y77.25833
G01 X-24.34838 Y77.23303
G01 X-24.33281 Y77.21799
G01 X-24.31678 Y77.20301
G01 X-24.31653 Y77.20275
G01 X-24.31528 Y77.19033
G01 X-24.31295 Y77.14232
G01 X-24.31295 Y77.04512
G01 X-24.36550 Y76.93054
G01 X-24.38539 Y76.86935
G01 X-24.39870 Y76.82424
G01 X-24.40050 Y76.80377
G01 X-24.40373 Y76.73107
G01 X-24.40368 Y76.68037
G01 X-24.40398 Y76.65818
G01 X-24.40426 Y76.64908
G01 X-24.40373 Y76.59330
G01 X-24.40352 Y76.58927
G01 X-24.40352 Y76.52038
G01 X-24.40520 Y76.48609
G01 X-24.41026 Y76.45211
G01 X-24.42367 Y76.38467
G01 X-24.43512 Y76.33887
G01 X-24.44084 Y76.31817
G01 X-24.44231 Y76.31251
G01 X-24.44734 Y76.29412
G01 X-24.44927 Y76.27451
G01 X-24.45267 Y76.20545
G01 X-24.45267 Y75.96735
G01 X-24.45351 Y75.93306
G01 X-24.45496 Y75.90367
G01 X-24.45524 Y75.89813
G01 X-24.45948 Y75.83306
G01 X-24.46085 Y75.80273
G01 X-24.46093 Y75.79986
G01 X-24.46509 Y75.73791
G01 X-24.46657 Y75.72396
G01 X-24.46936 Y75.69209
G01 X-24.47607 Y75.59480
G01 X-24.47800 Y75.55833
G01 X-24.47868 Y75.53981
G01 X-24.53601 Y75.48246
G01 X-24.55874 Y75.46382
G01 X-24.63863 Y75.41045
G01 X-24.64477 Y75.40717
G01 X-24.67327 Y75.41284
G01 X-24.71726 Y75.42247
G01 X-24.77662 Y75.43669
G01 X-24.80954 Y75.44395
G01 X-24.81135 Y75.44431
G01 X-24.88836 Y75.46359
G01 X-24.91881 Y75.47281
G01 X-24.95293 Y75.48406
G01 X-24.97507 Y75.49199
G01 X-25.03700 Y75.51083
G01 X-25.19382 Y75.55010
G01 X-25.24518 Y75.56034
G01 X-25.25293 Y75.56148
G01 X-25.27779 Y75.56580
G01 X-25.30677 Y75.57159
G01 X-25.35407 Y75.58343
G01 X-25.38219 Y75.59196
G01 X-25.39796 Y75.59701
G01 X-25.42846 Y75.60740
G01 X-25.44492 Y75.61271
G01 X-25.45701 Y75.61637
G01 X-25.50726 Y75.63438
G01 X-25.53565 Y75.64614
G01 X-25.58970 Y75.67177
G01 X-25.59636 Y75.67532
G01 X-25.61818 Y75.68647
G01 X-25.65856 Y75.70618
G01 X-25.66344 Y75.70860
G01 X-25.80957 Y75.63948
G01 X-25.85879 Y75.61319
G01 X-25.99748 Y75.53009
G01 X-26.03423 Y75.50555
G01 X-26.16156 Y75.41114
G01 X-26.19074 Y75.38718
G01 X-26.30710 Y75.28172
G01 X-26.33232 Y75.25650
G01 X-26.43778 Y75.14014
G01 X-26.46171 Y75.11096
G01 X-26.55615 Y74.98363
G01 X-26.58069 Y74.94688
G01 X-26.66379 Y74.80819
G01 X-26.69006 Y74.75897
G01 X-26.76128 Y74.60842
G01 X-26.77593 Y74.57532
G01 X-26.89592 Y74.28566
G01 X-26.89592 Y73.55973
G01 X-26.87947 Y73.47700
G01 X-26.83395 Y73.32691
G01 X-26.79719 Y73.23819
G01 X-26.72326 Y73.09986
G01 X-26.66989 Y73.02001
G01 X-26.65092 Y72.99689
G01 X-26.57492 Y72.90428
G01 X-26.57492 Y71.65813
G01 X-26.64683 Y71.59913
G01 X-26.71475 Y71.53121
G01 X-26.82046 Y71.40241
G01 X-26.87383 Y71.32252
G01 X-26.95239 Y71.17559
G01 X-26.98914 Y71.08684
G01 X-27.00492 Y71.03469
G01 X-27.00492 Y70.45783
G01 X-26.98355 Y70.41262
G01 X-26.94451 Y70.33949
G01 X-26.85620 Y70.19215
G01 X-26.81800 Y70.13490
G01 X-26.71767 Y69.99959
G01 X-26.67896 Y69.95240
G01 X-26.56689 Y69.82878
G01 X-26.52547 Y69.78735
G01 X-26.40184 Y69.67531
G01 X-26.39257 Y69.66708
G01 X-26.29140 Y69.42283
G01 X-26.28373 Y69.40297
G01 X-26.25917 Y69.33436
G01 X-26.24909 Y69.30117
G01 X-26.23192 Y69.23256
G01 X-26.22628 Y69.20432
G01 X-26.21609 Y69.13569
G01 X-26.21358 Y69.11024
G01 X-26.21020 Y69.04160
G01 X-26.20992 Y69.02931
G01 X-26.20992 Y63.15681
G01 X-26.21020 Y63.14454
G01 X-26.21358 Y63.07591
G01 X-26.21609 Y63.05048
G01 X-26.22628 Y62.98185
G01 X-26.22869 Y62.96785
G01 X-26.23687 Y62.95625
G01 X-26.27820 Y62.90054
G01 X-26.29443 Y62.88076
G01 X-26.34058 Y62.82986
G01 X-26.34904 Y62.82097
G01 X-28.05355 Y61.11645
G01 X-28.06242 Y61.10799
G01 X-28.11332 Y61.06186
G01 X-28.13313 Y61.04561
G01 X-28.18884 Y61.00431
G01 X-28.20047 Y60.99613
G01 X-28.21444 Y60.99369
G01 X-28.28304 Y60.98353
G01 X-28.30852 Y60.98102
G01 X-28.37715 Y60.97764
G01 X-28.38942 Y60.97733
G01 X-32.82195 Y60.97733
G01 X-32.83424 Y60.97703
G01 X-32.90285 Y60.97365
G01 X-32.92830 Y60.97114
G01 X-32.99690 Y60.96098
G01 X-33.02515 Y60.95534
G01 X-33.09375 Y60.93814
G01 X-33.12695 Y60.92806
G01 X-33.19556 Y60.90350
G01 X-33.21542 Y60.89582
G01 X-33.89985 Y60.61233
G01 X-34.68199 Y60.61233
G01 X-35.76093 Y59.53339
G01 X-35.75631 Y59.48635
G01 X-35.75631 Y59.39029
G01 X-35.76093 Y59.34327
G01 X-35.16995 Y58.75229
G01 X-35.13764 Y58.71666
G01 X-35.09413 Y58.66362
G01 X-35.04076 Y58.58376
G01 X-35.00841 Y58.52326
G01 X-34.97165 Y58.43451
G01 X-34.95174 Y58.36885
G01 X-34.93299 Y58.27465
G01 X-34.92629 Y58.20635
G01 X-34.92392 Y58.15831
G01 X-34.92392 Y56.81674
G01 X-34.88740 Y56.78676
G01 X-34.81948 Y56.71885
G01 X-34.73891 Y56.62067
G01 X-34.71999 Y56.59761
G01 X-34.66662 Y56.51775
G01 X-34.59268 Y56.37945
G01 X-34.55593 Y56.29070
G01 X-34.51041 Y56.14061
G01 X-34.49393 Y56.05771
G01 X-34.49393 Y55.62670
G01 X-34.47747 Y55.54399
G01 X-34.43195 Y55.39393
G01 X-34.39517 Y55.30518
G01 X-34.32126 Y55.16688
G01 X-34.26789 Y55.08700
G01 X-34.24892 Y55.06388
G01 X-34.16840 Y54.96576
G01 X-34.10048 Y54.89784
G01 X-34.05486 Y54.86043
G01 X-34.05484 Y54.86000
G01 X-34.03609 Y54.76579
G01 X-34.01618 Y54.70013
G01 X-33.97943 Y54.61138
G01 X-33.94707 Y54.55088
G01 X-33.89370 Y54.47102
G01 X-33.85019 Y54.41799
G01 X-33.81788 Y54.38235
G01 X-33.24181 Y53.80630
G01 X-32.76673 Y53.60953
G01 X-32.73853 Y53.59863
G01 X-32.66990 Y53.57410
G01 X-32.62083 Y53.55916
G01 X-32.55223 Y53.54197
G01 X-32.50884 Y53.53333
G01 X-32.44024 Y53.52314
G01 X-32.40010 Y53.51918
G01 X-32.33150 Y53.51580
G01 X-32.31194 Y53.51535
G01 X-28.54695 Y53.51535
G01 X-28.52737 Y53.51486
G01 X-28.45874 Y53.51149
G01 X-28.41860 Y53.50752
G01 X-28.35000 Y53.49734
G01 X-28.30662 Y53.48870
G01 X-28.23933 Y53.47184
G01 X-28.23826 Y53.47105
G01 X-28.20169 Y53.44105
G01 X-28.15079 Y53.39490
G01 X-28.13417 Y53.37908
G01 X-26.89915 Y52.14408
G01 X-26.88333 Y52.12746
G01 X-26.83720 Y52.07656
G01 X-26.80718 Y52.03999
G01 X-26.76588 Y51.98429
G01 X-26.73730 Y51.94146
G01 X-26.70095 Y51.88081
G01 X-26.67317 Y51.82874
G01 X-26.64200 Y51.76285
G01 X-26.62803 Y51.73130
G01 X-26.47187 Y51.35434
G01 X-25.84856 Y50.73100
G01 X-25.89745 Y50.67141
G01 X-25.95082 Y50.59153
G01 X-26.02938 Y50.44459
G01 X-26.06192 Y50.36592
G01 X-26.06192 Y49.16059
G01 X-26.02938 Y49.08206
G01 X-25.95082 Y48.93509
G01 X-25.89745 Y48.85523
G01 X-25.81693 Y48.75709
G01 X-25.79176 Y48.72643
G01 X-25.72384 Y48.65849
G01 X-25.65191 Y48.59948
G01 X-25.65191 Y48.03227
G01 X-27.32592 Y46.35826
G01 X-27.49638 Y45.94678
G01 X-27.50824 Y45.91605
G01 X-27.53278 Y45.84742
G01 X-27.54919 Y45.79349
G01 X-27.56638 Y45.72489
G01 X-27.57593 Y45.67693
G01 X-27.58612 Y45.60830
G01 X-27.59051 Y45.56372
G01 X-27.59389 Y45.49509
G01 X-27.59442 Y45.47330
G01 X-27.59442 Y32.51930
G01 X-27.59389 Y32.49753
G01 X-27.59051 Y32.42893
G01 X-27.58612 Y32.38435
G01 X-27.57593 Y32.31572
G01 X-27.56638 Y32.26776
G01 X-27.54919 Y32.19916
G01 X-27.53278 Y32.14523
G01 X-27.50824 Y32.07660
G01 X-27.49638 Y32.04587
G01 X-27.32590 Y31.63434
G01 X-27.14817 Y31.45661
G01 X-27.13717 Y31.45372
G01 X-27.07187 Y31.43251
G01 X-26.83347 Y31.31346
G01 X-26.78338 Y31.27706
G01 X-26.69877 Y31.20488
G01 X-26.29321 Y30.79931
G01 X-26.22006 Y30.72619
G01 X-26.19516 Y30.70246
G01 X-26.16971 Y30.67937
G01 X-26.14213 Y30.65893
G01 X-26.08485 Y30.62065
G01 X-26.08439 Y30.62040
G01 X-26.05539 Y30.60300
G01 X-26.02435 Y30.58832
G01 X-25.96075 Y30.56198
G01 X-25.92844 Y30.55042
G01 X-25.89509 Y30.54206
G01 X-25.82765 Y30.52865
G01 X-25.79367 Y30.52362
G01 X-25.75938 Y30.52192
G01 X-25.72493 Y30.52108
G01 X-25.38846 Y30.52108
G01 X-25.36088 Y30.52055
G01 X-25.34536 Y30.51994
G01 X-25.20451 Y30.50025
G01 X-25.19519 Y30.49802
G01 X-25.15389 Y30.46477
G01 X-25.11505 Y30.43124
G01 X-25.07043 Y30.38984
G01 X-25.06433 Y30.38423
G01 X-25.05300 Y30.37397
G01 X-25.02290 Y30.34669
G01 X-24.98386 Y30.31651
G01 X-24.94416 Y30.28346
G01 X-24.89941 Y30.24333
G01 X-24.89136 Y30.23622
G01 X-24.85216 Y30.20206
G01 X-24.77375 Y30.12355
G01 X-24.71229 Y30.05314
G01 X-24.69164 Y30.02878
G01 X-24.69047 Y29.98192
G01 X-24.69047 Y29.92073
G01 X-24.69164 Y29.87389
G01 X-24.71221 Y29.84958
G01 X-24.77381 Y29.77907
G01 X-24.85209 Y29.70066
G01 X-24.89141 Y29.66640
G01 X-24.89936 Y29.65936
G01 X-24.94416 Y29.61918
G01 X-24.98386 Y29.58613
G01 X-25.02295 Y29.55593
G01 X-25.06436 Y29.51842
G01 X-25.11302 Y29.46975
G01 X-25.15054 Y29.42832
G01 X-25.21234 Y29.34836
G01 X-25.25173 Y29.29180
G01 X-25.25740 Y29.28278
G01 X-25.32504 Y29.15316
G01 X-25.34025 Y29.12218
G01 X-25.35140 Y29.08956
G01 X-25.39519 Y28.95012
G01 X-25.39760 Y28.93970
G01 X-25.40972 Y28.87181
G01 X-25.42260 Y28.77161
G01 X-25.42534 Y28.71575
G01 X-25.42534 Y28.64692
G01 X-25.42260 Y28.59109
G01 X-25.40972 Y28.49091
G01 X-25.39760 Y28.42299
G01 X-25.39522 Y28.41265
G01 X-25.35140 Y28.27311
G01 X-25.34025 Y28.24049
G01 X-25.32504 Y28.20948
G01 X-25.25740 Y28.07989
G01 X-25.25173 Y28.07085
G01 X-25.21234 Y28.01431
G01 X-25.15054 Y27.93430
G01 X-25.11302 Y27.89289
G01 X-25.06436 Y27.84423
G01 X-25.02293 Y27.80671
G01 X-24.94297 Y27.74494
G01 X-24.88640 Y27.70552
G01 X-24.87739 Y27.69990
G01 X-24.74777 Y27.63221
G01 X-24.71678 Y27.61700
G01 X-24.68414 Y27.60587
G01 X-24.54462 Y27.56203
G01 X-24.53426 Y27.55967
G01 X-24.46636 Y27.54755
G01 X-24.36616 Y27.53465
G01 X-24.31033 Y27.53191
G01 X-24.27594 Y27.53110
G01 X-23.47594 Y27.53110
G01 X-23.44152 Y27.53191
G01 X-23.38567 Y27.53465
G01 X-23.28547 Y27.54755
G01 X-23.21755 Y27.55967
G01 X-23.20721 Y27.56203
G01 X-23.06769 Y27.60587
G01 X-23.03507 Y27.61700
G01 X-23.00409 Y27.63221
G01 X-22.87447 Y27.69990
G01 X-22.86545 Y27.70552
G01 X-22.80889 Y27.74494
G01 X-22.72893 Y27.80669
G01 X-22.68753 Y27.84423
G01 X-22.63883 Y27.89294
G01 X-22.59710 Y27.93897
G01 X-22.52850 Y28.00526
G01 X-22.52177 Y28.01093
G01 X-22.47899 Y28.05002
G01 X-22.47274 Y28.05616
G01 X-22.34018 Y28.16312
G01 X-22.28034 Y28.20300
G01 X-22.26794 Y28.23292
G01 X-22.22240 Y28.38301
G01 X-22.20368 Y28.47722
G01 X-22.18829 Y28.63328
G01 X-22.18829 Y28.72934
G01 X-22.19411 Y28.78855
G01 X-22.23830 Y28.88199
G01 X-22.28092 Y28.96188
G01 X-22.36403 Y29.10054
G01 X-22.40645 Y29.16411
G01 X-22.49309 Y29.28090
G01 X-22.50089 Y29.29144
G01 X-22.53619 Y29.33526
G01 X-22.54427 Y29.34448
G01 X-22.55821 Y29.36091
G01 X-22.60175 Y29.41397
G01 X-22.64153 Y29.46752
G01 X-22.64224 Y29.46858
G01 X-22.65506 Y29.48707
G01 X-22.68750 Y29.51842
G01 X-22.72890 Y29.55593
G01 X-22.76799 Y29.58613
G01 X-22.80769 Y29.61918
G01 X-22.85250 Y29.65936
G01 X-22.86045 Y29.66640
G01 X-22.89977 Y29.70066
G01 X-22.97805 Y29.77907
G01 X-23.03962 Y29.84958
G01 X-23.06019 Y29.87386
G01 X-23.06139 Y29.92073
G01 X-23.06139 Y29.98192
G01 X-23.06019 Y30.02880
G01 X-23.03957 Y30.05316
G01 X-22.97810 Y30.12355
G01 X-22.89969 Y30.20206
G01 X-22.86050 Y30.23622
G01 X-22.85245 Y30.24333
G01 X-22.80769 Y30.28346
G01 X-22.76799 Y30.31651
G01 X-22.74767 Y30.33221
G01 X-22.71008 Y30.41171
G01 X-22.68539 Y30.47112
G01 X-22.62928 Y30.62794
G01 X-22.61569 Y30.67259
G01 X-22.57640 Y30.82941
G01 X-22.56944 Y30.86441
G01 X-22.54617 Y31.02126
G01 X-22.54328 Y31.05070
G01 X-22.53556 Y31.20749
G01 X-22.53556 Y31.23515
G01 X-22.54328 Y31.39197
G01 X-22.54617 Y31.42141
G01 X-22.56944 Y31.57823
G01 X-22.57640 Y31.61323
G01 X-22.61569 Y31.77005
G01 X-22.62928 Y31.81470
G01 X-22.68539 Y31.97152
G01 X-22.71008 Y32.03093
G01 X-22.74767 Y32.11044
G01 X-22.76799 Y32.12613
G01 X-22.80769 Y32.15918
G01 X-22.85250 Y32.19936
G01 X-22.86045 Y32.20640
G01 X-22.89977 Y32.24066
G01 X-22.97805 Y32.31907
G01 X-23.03962 Y32.38958
G01 X-23.08537 Y32.44650
G01 X-23.08575 Y32.44696
G01 X-23.17762 Y32.47485
G01 X-23.26040 Y32.49133
G01 X-24.49141 Y32.49131
G01 X-24.57424 Y32.47485
G01 X-24.72433 Y32.42931
G01 X-24.81307 Y32.39255
G01 X-24.95138 Y32.31864
G01 X-25.03123 Y32.26527
G01 X-25.15247 Y32.16578
G01 X-25.22039 Y32.09786
G01 X-25.25039 Y32.06131
G01 X-25.37698 Y32.06131
G01 X-26.18295 Y32.86725
G01 X-26.18295 Y45.12537
G01 X-24.21795 Y47.09037
G01 X-24.18564 Y47.12600
G01 X-24.14213 Y47.17904
G01 X-24.08877 Y47.25889
G01 X-24.05641 Y47.31940
G01 X-24.01965 Y47.40814
G01 X-23.99974 Y47.47380
G01 X-23.98100 Y47.56801
G01 X-23.97429 Y47.63631
G01 X-23.97193 Y47.68432
G01 X-23.97193 Y48.59951
G01 X-23.90005 Y48.65849
G01 X-23.83213 Y48.72643
G01 X-23.72641 Y48.85523
G01 X-23.67305 Y48.93509
G01 X-23.59451 Y49.08206
G01 X-23.56192 Y49.16062
G01 X-23.56192 Y49.34614
G01 X-23.56195 Y49.43148
G01 X-23.56195 Y50.15843
G01 X-23.57282 Y50.17713
G01 X-23.66113 Y50.32447
G01 X-23.70271 Y50.38675
G01 X-23.80304 Y50.52203
G01 X-23.84544 Y50.57372
G01 X-23.95747 Y50.69734
G01 X-24.00289 Y50.74276
G01 X-24.12593 Y50.85429
G01 X-24.13756 Y50.88231
G01 X-24.15112 Y50.91294
G01 X-24.18229 Y50.97883
G01 X-24.20921 Y51.02930
G01 X-24.24559 Y51.08998
G01 X-24.27320 Y51.13135
G01 X-24.31452 Y51.18708
G01 X-24.34350 Y51.22239
G01 X-24.38963 Y51.27329
G01 X-24.40490 Y51.28934
G01 X-27.58691 Y54.47135
G01 X-27.60296 Y54.48662
G01 X-27.65386 Y54.53274
G01 X-27.68919 Y54.56172
G01 X-27.74489 Y54.60303
G01 X-27.78627 Y54.63066
G01 X-27.84695 Y54.66703
G01 X-27.89742 Y54.69396
G01 X-27.96331 Y54.72512
G01 X-27.98589 Y54.73528
G01 X-27.99392 Y54.73495
G01 X-28.11307 Y54.72909
G01 X-28.17476 Y54.72909
G01 X-28.33158 Y54.73681
G01 X-28.39541 Y54.74311
G01 X-28.55223 Y54.76635
G01 X-28.62262 Y54.78039
G01 X-28.77946 Y54.81969
G01 X-28.86138 Y54.84458
G01 X-29.01817 Y54.90071
G01 X-29.02691 Y54.90432
G01 X-29.80092 Y54.90435
G01 X-29.80971 Y54.90069
G01 X-29.96653 Y54.84458
G01 X-30.04837 Y54.81969
G01 X-30.20519 Y54.78039
G01 X-30.27562 Y54.76635
G01 X-30.43244 Y54.74311
G01 X-30.49625 Y54.73681
G01 X-30.65307 Y54.72909
G01 X-30.71476 Y54.72909
G01 X-30.87158 Y54.73681
G01 X-30.93541 Y54.74311
G01 X-31.09223 Y54.76635
G01 X-31.16262 Y54.78039
G01 X-31.31946 Y54.81969
G01 X-31.40138 Y54.84458
G01 X-31.55817 Y54.90071
G01 X-31.56691 Y54.90432
G01 X-31.96399 Y54.90432
G01 X-32.16663 Y55.10699
G01 X-32.12662 Y55.16688
G01 X-32.05268 Y55.30518
G01 X-32.01593 Y55.39393
G01 X-31.97041 Y55.54399
G01 X-31.95393 Y55.62670
G01 X-31.95393 Y56.05771
G01 X-31.93747 Y56.14061
G01 X-31.89195 Y56.29070
G01 X-31.85517 Y56.37945
G01 X-31.78126 Y56.51775
G01 X-31.77084 Y56.53332
G01 X-33.11036 Y57.87282
G01 X-33.18964 Y57.84879
G01 X-33.28385 Y57.83004
G01 X-33.43990 Y57.81468
G01 X-33.53597 Y57.81468
G01 X-33.69205 Y57.83004
G01 X-33.78626 Y57.84879
G01 X-33.93632 Y57.89431
G01 X-34.02507 Y57.93106
G01 X-34.16337 Y58.00500
G01 X-34.24326 Y58.05837
G01 X-34.36446 Y58.15786
G01 X-34.43241 Y58.22578
G01 X-34.46322 Y58.26334
G01 X-34.53188 Y58.34701
G01 X-34.58527 Y58.42687
G01 X-34.65918 Y58.56517
G01 X-34.69593 Y58.65392
G01 X-34.74148 Y58.80401
G01 X-34.76020 Y58.89822
G01 X-34.77559 Y59.05427
G01 X-34.77559 Y59.15034
G01 X-34.76020 Y59.30642
G01 X-34.74148 Y59.40063
G01 X-34.69593 Y59.55069
G01 X-34.65918 Y59.63944
G01 X-34.58527 Y59.77774
G01 X-34.53188 Y59.85762
G01 X-34.43241 Y59.97886
G01 X-34.36446 Y60.04678
G01 X-34.27803 Y60.11772
G01 X-34.24867 Y60.18859
G01 X-34.24343 Y60.20126
G01 X-34.21107 Y60.26176
G01 X-34.15771 Y60.34162
G01 X-34.11420 Y60.39466
G01 X-34.08189 Y60.43029
G01 X-33.89985 Y60.61233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-36.10784 Y61.56235 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-36.10784 Y61.56235
G01 X-37.58198 Y61.56235
G01 X-39.57093 Y59.57337
G01 X-39.56631 Y59.52633
G01 X-39.56631 Y59.43030
G01 X-39.58168 Y59.27421
G01 X-39.60042 Y59.18000
G01 X-39.64594 Y59.02991
G01 X-39.68269 Y58.94119
G01 X-39.75663 Y58.80286
G01 X-39.81000 Y58.72301
G01 X-39.90949 Y58.60177
G01 X-39.97741 Y58.53385
G01 X-40.00392 Y58.51209
G01 X-40.00392 Y56.81674
G01 X-39.96740 Y56.78676
G01 X-39.89948 Y56.71885
G01 X-39.81891 Y56.62067
G01 X-39.79999 Y56.59761
G01 X-39.74662 Y56.51775
G01 X-39.67268 Y56.37945
G01 X-39.63593 Y56.29070
G01 X-39.59041 Y56.14061
G01 X-39.57390 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.57390 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.57390 Y55.62670
G01 X-39.59041 Y55.54399
G01 X-39.63593 Y55.39393
G01 X-39.67268 Y55.30518
G01 X-39.74662 Y55.16688
G01 X-39.79999 Y55.08700
G01 X-39.89948 Y54.96576
G01 X-39.96740 Y54.89784
G01 X-40.08863 Y54.79835
G01 X-40.16849 Y54.74499
G01 X-40.30679 Y54.67107
G01 X-40.39554 Y54.63432
G01 X-40.54563 Y54.58878
G01 X-40.63984 Y54.57006
G01 X-40.79590 Y54.55466
G01 X-40.89196 Y54.55466
G01 X-41.04804 Y54.57006
G01 X-41.14225 Y54.58878
G01 X-41.29231 Y54.63432
G01 X-41.38106 Y54.67107
G01 X-41.51939 Y54.74499
G01 X-41.59925 Y54.79835
G01 X-41.72048 Y54.89784
G01 X-41.78840 Y54.96576
G01 X-41.86892 Y55.06388
G01 X-41.88789 Y55.08700
G01 X-41.94126 Y55.16688
G01 X-42.01517 Y55.30518
G01 X-42.05195 Y55.39393
G01 X-42.09747 Y55.54399
G01 X-42.11390 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.11390 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.11390 Y56.05771
G01 X-42.13041 Y56.14061
G01 X-42.16064 Y56.24031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.06714 Y56.24041 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.06714 Y56.24041
G01 X-42.09747 Y56.14061
G01 X-42.11390 Y56.05771
G01 X-42.11390 Y55.62670
G01 X-42.13041 Y55.54399
G01 X-42.17593 Y55.39393
G01 X-42.21268 Y55.30518
G01 X-42.28662 Y55.16688
G01 X-42.33999 Y55.08700
G01 X-42.43948 Y54.96576
G01 X-42.50740 Y54.89784
G01 X-42.54392 Y54.86790
G01 X-42.54392 Y54.43526
G01 X-40.77200 Y52.66330
G01 X-37.94084 Y52.66330
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-36.97581 Y50.98906 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-36.97581 Y50.98906
G01 X-36.98628 Y50.98236
G01 X-37.03167 Y50.90372
G01 X-37.06332 Y50.80628
G01 X-37.07403 Y50.70440
G01 X-37.07403 Y50.68998
G01 X-37.07282 Y50.68802
G01 X-37.06093 Y50.66902
G01 X-37.04549 Y50.64322
G01 X-36.96098 Y50.52333
G01 X-36.91076 Y50.46295
G01 X-36.90469 Y50.45576
G01 X-36.87685 Y50.42312
G01 X-36.82336 Y50.36684
G01 X-36.80274 Y50.34733
G01 X-36.75501 Y50.29760
G01 X-36.68404 Y50.21596
G01 X-36.65519 Y50.17664
G01 X-36.61727 Y50.11924
G01 X-36.58026 Y50.05681
G01 X-36.54340 Y49.98089
G01 X-36.51638 Y49.91751
G01 X-36.50360 Y49.88294
G01 X-36.49862 Y49.86501
G01 X-36.47145 Y49.76727
G01 X-36.45623 Y49.69996
G01 X-36.45605 Y49.69889
G01 X-36.44198 Y49.54378
G01 X-36.43972 Y49.50933
G01 X-36.44198 Y49.47487
G01 X-36.45605 Y49.31975
G01 X-36.45623 Y49.31868
G01 X-36.47142 Y49.25140
G01 X-36.50360 Y49.13570
G01 X-36.51638 Y49.10113
G01 X-36.54340 Y49.03776
G01 X-36.58026 Y48.96184
G01 X-36.61727 Y48.89940
G01 X-36.65519 Y48.84200
G01 X-36.68404 Y48.80268
G01 X-36.75501 Y48.72105
G01 X-36.80274 Y48.67129
G01 X-36.81221 Y48.66235
G01 X-36.92458 Y48.57253
G01 X-36.96174 Y48.54479
G01 X-36.98158 Y48.53372
G01 X-37.04782 Y48.49808
G01 X-37.11968 Y48.45945
G01 X-37.12915 Y48.45445
G01 X-37.18381 Y48.43423
G01 X-37.30939 Y48.39364
G01 X-37.33365 Y48.38795
G01 X-37.40147 Y48.37555
G01 X-37.49694 Y48.36288
G01 X-37.55752 Y48.35991
G01 X-37.62633 Y48.35991
G01 X-37.68691 Y48.36288
G01 X-37.78236 Y48.37555
G01 X-37.85016 Y48.38795
G01 X-37.87446 Y48.39364
G01 X-38.00004 Y48.43423
G01 X-38.05465 Y48.45442
G01 X-38.06418 Y48.45945
G01 X-38.20228 Y48.53372
G01 X-38.22209 Y48.54479
G01 X-38.25927 Y48.57253
G01 X-38.37162 Y48.66235
G01 X-38.37535 Y48.66588
G01 X-38.38114 Y48.67126
G01 X-38.43212 Y48.71835
G01 X-38.45808 Y48.74121
G01 X-38.50578 Y48.78122
G01 X-38.51129 Y48.78582
G01 X-38.65315 Y48.80723
G01 X-38.67274 Y48.80822
G01 X-38.70776 Y48.80908
G01 X-39.52404 Y48.80908
G01 X-39.63509 Y48.80029
G01 X-39.69628 Y48.79059
G01 X-39.72079 Y48.78627
G01 X-39.80045 Y48.71894
G01 X-39.81642 Y48.70332
G01 X-39.83067 Y48.68980
G01 X-39.85071 Y48.67126
G01 X-39.85645 Y48.66593
G01 X-39.86029 Y48.66227
G01 X-39.97258 Y48.57253
G01 X-40.00974 Y48.54479
G01 X-40.02958 Y48.53372
G01 X-40.09582 Y48.49808
G01 X-40.16768 Y48.45945
G01 X-40.17715 Y48.45445
G01 X-40.23181 Y48.43423
G01 X-40.35739 Y48.39364
G01 X-40.38165 Y48.38795
G01 X-40.44947 Y48.37555
G01 X-40.54494 Y48.36288
G01 X-40.60552 Y48.35991
G01 X-40.67433 Y48.35991
G01 X-40.73491 Y48.36288
G01 X-40.83036 Y48.37555
G01 X-40.89816 Y48.38795
G01 X-40.92246 Y48.39364
G01 X-41.04804 Y48.43423
G01 X-41.10265 Y48.45442
G01 X-41.11218 Y48.45945
G01 X-41.25028 Y48.53372
G01 X-41.27009 Y48.54479
G01 X-41.30727 Y48.57253
G01 X-41.41962 Y48.66235
G01 X-41.42912 Y48.67131
G01 X-41.47685 Y48.72105
G01 X-41.54781 Y48.80268
G01 X-41.57667 Y48.84200
G01 X-41.61461 Y48.89946
G01 X-41.65157 Y48.96184
G01 X-41.68845 Y49.03781
G01 X-41.71545 Y49.10108
G01 X-41.72823 Y49.13570
G01 X-41.76041 Y49.25135
G01 X-41.77563 Y49.31868
G01 X-41.77580 Y49.31977
G01 X-41.78987 Y49.47487
G01 X-41.79214 Y49.50933
G01 X-41.78987 Y49.54378
G01 X-41.77580 Y49.69887
G01 X-41.77563 Y49.69996
G01 X-41.76041 Y49.76732
G01 X-41.72823 Y49.88294
G01 X-41.71545 Y49.91756
G01 X-41.68845 Y49.98083
G01 X-41.65157 Y50.05681
G01 X-41.61461 Y50.11919
G01 X-41.57667 Y50.17664
G01 X-41.54781 Y50.21596
G01 X-41.47685 Y50.29760
G01 X-41.42912 Y50.34733
G01 X-41.41962 Y50.35630
G01 X-41.33234 Y50.42605
G01 X-41.30773 Y50.44667
G01 X-41.25472 Y50.49315
G01 X-41.24731 Y50.49976
G01 X-41.20047 Y50.54195
G01 X-41.13712 Y50.60578
G01 X-41.07545 Y50.67502
G01 X-41.02683 Y50.73603
G01 X-41.02437 Y50.77060
G01 X-41.02640 Y50.83173
G01 X-41.04047 Y50.93316
G01 X-41.05648 Y50.97735
G01 X-41.11992 Y51.02511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.02683 Y50.73603 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.02683 Y50.73603
G01 X-40.93824 Y50.76285
G01 X-40.84403 Y50.78157
G01 X-40.68797 Y50.79696
G01 X-40.59191 Y50.79696
G01 X-40.43583 Y50.78157
G01 X-40.34162 Y50.76285
G01 X-40.19155 Y50.71731
G01 X-40.10281 Y50.68055
G01 X-39.96450 Y50.60664
G01 X-39.88462 Y50.55327
G01 X-39.76339 Y50.45378
G01 X-39.69547 Y50.38586
G01 X-39.66550 Y50.34931
G01 X-38.56639 Y50.34931
G01 X-38.53639 Y50.38586
G01 X-38.46847 Y50.45378
G01 X-38.38940 Y50.51865
G01 X-38.34724 Y50.55327
G01 X-38.26738 Y50.60664
G01 X-38.12907 Y50.68055
G01 X-38.04033 Y50.71731
G01 X-37.89024 Y50.76285
G01 X-37.79603 Y50.78157
G01 X-37.63997 Y50.79696
G01 X-37.54391 Y50.79696
G01 X-37.38783 Y50.78157
G01 X-37.29362 Y50.76285
G01 X-37.14355 Y50.71731
G01 X-37.07282 Y50.68802
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.42451 Y48.89570 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.42451 Y48.89570
G01 X-33.44298 Y48.92333
G01 X-33.46952 Y48.92333
G01 X-33.44514 Y48.88112
G01 X-33.44250 Y48.87769
G01 X-33.42451 Y48.89570
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.60066 Y50.98332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.60066 Y50.98332
G01 X-33.58202 Y50.95284
G01 X-33.53797 Y50.86041
G01 X-33.51407 Y50.76084
G01 X-33.51141 Y50.65848
G01 X-33.51575 Y50.60334
G01 X-33.44295 Y50.60334
G01 X-33.43460 Y50.61583
G01 X-33.39746 Y50.67141
G01 X-33.29175 Y50.80021
G01 X-33.22383 Y50.86813
G01 X-33.09502 Y50.97385
G01 X-33.08082 Y50.98332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.54298 Y50.98332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.54298 Y50.98332
G01 X-31.52886 Y50.97385
G01 X-31.40006 Y50.86813
G01 X-31.33211 Y50.80021
G01 X-31.22642 Y50.67141
G01 X-31.17306 Y50.59153
G01 X-31.09449 Y50.44459
G01 X-31.06193 Y50.36595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.06193 Y49.16064 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.06193 Y49.16064
G01 X-31.02937 Y49.08206
G01 X-30.95083 Y48.93509
G01 X-30.89747 Y48.85523
G01 X-30.79175 Y48.72643
G01 X-30.72383 Y48.65849
G01 X-30.67143 Y48.61548
G01 X-30.65192 Y48.59948
G01 X-30.65192 Y48.23926
G01 X-30.86594 Y48.02524
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.56194 Y49.16062 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.56194 Y49.16062
G01 X-28.52937 Y49.08206
G01 X-28.45084 Y48.93509
G01 X-28.39747 Y48.85523
G01 X-28.31693 Y48.75709
G01 X-28.29176 Y48.72643
G01 X-28.22384 Y48.65849
G01 X-28.15190 Y48.59948
G01 X-28.15190 Y48.32628
G01 X-28.75990 Y47.71828
G01 X-28.79221 Y47.68264
G01 X-28.83572 Y47.62961
G01 X-28.88909 Y47.54975
G01 X-28.92145 Y47.48925
G01 X-28.95820 Y47.40050
G01 X-28.97811 Y47.33484
G01 X-28.99686 Y47.24063
G01 X-29.00357 Y47.17233
G01 X-29.00593 Y47.12430
G01 X-29.00593 Y30.45425
G01 X-29.93887 Y29.52131
G01 X-30.12150 Y29.52131
G01 X-30.15147 Y29.55786
G01 X-30.21939 Y29.62578
G01 X-30.34062 Y29.72527
G01 X-30.42050 Y29.77864
G01 X-30.55881 Y29.85255
G01 X-30.64756 Y29.88931
G01 X-30.79762 Y29.93485
G01 X-30.88040 Y29.95133
G01 X-32.11141 Y29.95131
G01 X-32.19424 Y29.93485
G01 X-32.34433 Y29.88931
G01 X-32.43307 Y29.85255
G01 X-32.57138 Y29.77864
G01 X-32.65123 Y29.72527
G01 X-32.77247 Y29.62578
G01 X-32.79726 Y29.60099
G01 X-33.57757 Y30.38133
G01 X-33.66947 Y30.41938
G01 X-33.71293 Y30.43617
G01 X-33.78153 Y30.46073
G01 X-33.85974 Y30.48451
G01 X-33.92835 Y30.50170
G01 X-33.99942 Y30.51585
G01 X-34.06802 Y30.52603
G01 X-34.13503 Y30.53264
G01 X-34.20366 Y30.53602
G01 X-34.23655 Y30.53683
G01 X-36.01193 Y30.53683
G01 X-36.04483 Y30.53764
G01 X-36.11343 Y30.54102
G01 X-36.18041 Y30.54763
G01 X-36.24902 Y30.55781
G01 X-36.32009 Y30.57196
G01 X-36.38869 Y30.58915
G01 X-36.46690 Y30.61293
G01 X-36.53550 Y30.63749
G01 X-36.57896 Y30.65428
G01 X-36.67081 Y30.69230
G01 X-36.92219 Y30.69238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-36.85366 Y30.87513 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-36.85366 Y30.87513
G01 X-36.67081 Y30.69230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.67907 Y29.01232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.67907 Y29.01232
G01 X-35.65986 Y29.00351
G01 X-35.63960 Y28.96838
G01 X-35.61470 Y28.91250
G01 X-35.58305 Y28.81504
G01 X-35.57234 Y28.71316
G01 X-35.58305 Y28.61126
G01 X-35.59578 Y28.55144
G01 X-35.61762 Y28.47773
G01 X-35.65069 Y28.40836
G01 X-35.72750 Y28.27534
G01 X-35.79923 Y28.09254
G01 X-35.84292 Y27.90112
G01 X-35.85760 Y27.70531
G01 X-35.84018 Y27.47293
G01 X-35.83256 Y27.39320
G01 X-35.83406 Y27.34339
G01 X-35.84559 Y27.25142
G01 X-35.87424 Y27.16328
G01 X-35.91900 Y27.08210
G01 X-35.95346 Y27.03155
G01 X-36.01971 Y26.95337
G01 X-36.10076 Y26.89074
G01 X-36.19306 Y26.84629
G01 X-36.25064 Y26.82566
G01 X-36.35011 Y26.80143
G01 X-36.45242 Y26.79836
G01 X-36.55316 Y26.81659
G01 X-36.61191 Y26.83374
G01 X-36.68387 Y26.86102
G01 X-36.75064 Y26.89925
G01 X-36.93512 Y27.02500
G01 X-37.11198 Y27.11019
G01 X-37.29959 Y27.16805
G01 X-37.49374 Y27.19734
G01 X-37.69011 Y27.19734
G01 X-37.71086 Y27.19419
G01 X-37.68699 Y27.17031
G01 X-37.63997 Y27.17496
G01 X-37.54391 Y27.17496
G01 X-37.38783 Y27.15957
G01 X-37.29362 Y27.14085
G01 X-37.14355 Y27.09533
G01 X-37.05481 Y27.05855
G01 X-36.91650 Y26.98464
G01 X-36.83662 Y26.93127
G01 X-36.71539 Y26.83178
G01 X-36.64747 Y26.76386
G01 X-36.54798 Y26.64263
G01 X-36.49461 Y26.56275
G01 X-36.42070 Y26.42444
G01 X-36.38394 Y26.33570
G01 X-36.33840 Y26.18563
G01 X-36.31968 Y26.09145
G01 X-36.30429 Y25.93537
G01 X-36.30429 Y25.83928
G01 X-36.30894 Y25.79226
G01 X-36.28702 Y25.77037
G01 X-36.27825 Y25.88733
G01 X-36.29552 Y26.11974
G01 X-36.30330 Y26.19945
G01 X-36.30180 Y26.24928
G01 X-36.29027 Y26.34126
G01 X-36.26162 Y26.42940
G01 X-36.21686 Y26.51057
G01 X-36.18239 Y26.56112
G01 X-36.11618 Y26.63923
G01 X-36.03515 Y26.70189
G01 X-35.94290 Y26.74631
G01 X-35.88529 Y26.76696
G01 X-35.78572 Y26.79127
G01 X-35.68328 Y26.79434
G01 X-35.58245 Y26.77603
G01 X-35.52372 Y26.75886
G01 X-35.45189 Y26.73158
G01 X-35.38521 Y26.69343
G01 X-35.38392 Y26.69254
G01 X-35.38392 Y26.73089
G01 X-35.42047 Y26.76084
G01 X-35.48839 Y26.82879
G01 X-35.58788 Y26.94999
G01 X-35.64125 Y27.02988
G01 X-35.71519 Y27.16818
G01 X-35.75194 Y27.25693
G01 X-35.79746 Y27.40699
G01 X-35.81620 Y27.50123
G01 X-35.83157 Y27.65731
G01 X-35.83157 Y27.75335
G01 X-35.81620 Y27.90940
G01 X-35.79746 Y28.00361
G01 X-35.75194 Y28.15370
G01 X-35.71519 Y28.24245
G01 X-35.64125 Y28.38075
G01 X-35.58788 Y28.46063
G01 X-35.48839 Y28.58184
G01 X-35.45992 Y28.61037
G01 X-35.42047 Y28.64976
G01 X-35.29924 Y28.74925
G01 X-35.21938 Y28.80262
G01 X-35.08107 Y28.87656
G01 X-34.99233 Y28.91331
G01 X-34.84224 Y28.95883
G01 X-34.74803 Y28.97757
G01 X-34.59197 Y28.99294
G01 X-34.56462 Y28.99294
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.57757 Y30.38133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.57757 Y30.38133
G01 X-32.87039 Y30.38133
G01 X-32.84039 Y30.34478
G01 X-32.77247 Y30.27686
G01 X-32.65123 Y30.17737
G01 X-32.57138 Y30.12400
G01 X-32.43307 Y30.05006
G01 X-32.34433 Y30.01331
G01 X-32.19424 Y29.96779
G01 X-32.11141 Y29.95131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.26751 Y27.86744 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.26751 Y27.86744
G01 X-33.25629 Y27.75335
G01 X-33.25629 Y27.65731
G01 X-33.26094 Y27.61027
G01 X-33.21059 Y27.55998
G01 X-33.18946 Y27.59823
G01 X-33.13439 Y27.67796
G01 X-33.06470 Y27.74534
G01 X-32.98311 Y27.79767
G01 X-32.92858 Y27.82548
G01 X-32.88209 Y27.84329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.37393 Y31.28796 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.37393 Y31.28796
G01 X-27.32595 Y31.37577
G01 X-27.32590 Y31.63434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.88040 Y32.49133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.88040 Y32.49133
G01 X-30.79762 Y32.50779
G01 X-30.64756 Y32.55331
G01 X-30.55881 Y32.59006
G01 X-30.42050 Y32.66400
G01 X-30.34062 Y32.71737
G01 X-30.21939 Y32.81686
G01 X-30.15147 Y32.88478
G01 X-30.05198 Y33.00601
G01 X-29.99861 Y33.08587
G01 X-29.92470 Y33.22418
G01 X-29.88794 Y33.31292
G01 X-29.84240 Y33.46301
G01 X-29.82368 Y33.55722
G01 X-29.80829 Y33.71328
G01 X-29.80829 Y33.80934
G01 X-29.82368 Y33.96542
G01 X-29.84240 Y34.05963
G01 X-29.88794 Y34.20970
G01 X-29.92470 Y34.29844
G01 X-29.99861 Y34.43675
G01 X-30.05198 Y34.51663
G01 X-30.15147 Y34.63786
G01 X-30.21939 Y34.70578
G01 X-30.34062 Y34.80527
G01 X-30.42050 Y34.85864
G01 X-30.55881 Y34.93255
G01 X-30.64756 Y34.96931
G01 X-30.79762 Y35.01485
G01 X-30.88040 Y35.03133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.11141 Y35.03131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.11141 Y35.03131
G01 X-32.19424 Y35.01485
G01 X-32.34433 Y34.96931
G01 X-32.43307 Y34.93255
G01 X-32.57138 Y34.85864
G01 X-32.65123 Y34.80527
G01 X-32.77247 Y34.70578
G01 X-32.84039 Y34.63786
G01 X-32.93988 Y34.51663
G01 X-32.99325 Y34.43675
G01 X-33.06718 Y34.29844
G01 X-33.10394 Y34.20970
G01 X-33.14946 Y34.05963
G01 X-33.16820 Y33.96542
G01 X-33.18357 Y33.80934
G01 X-33.18357 Y33.71328
G01 X-33.16820 Y33.55722
G01 X-33.14946 Y33.46301
G01 X-33.10394 Y33.31292
G01 X-33.06718 Y33.22418
G01 X-32.99325 Y33.08587
G01 X-32.93988 Y33.00601
G01 X-32.84039 Y32.88478
G01 X-32.80033 Y32.84470
G01 X-32.77247 Y32.81686
G01 X-32.65123 Y32.71737
G01 X-32.57138 Y32.66400
G01 X-32.43307 Y32.59006
G01 X-32.34433 Y32.55331
G01 X-32.19424 Y32.50779
G01 X-32.11141 Y32.49131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.88040 Y29.95133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.88040 Y29.95133
G01 X-30.79762 Y29.96779
G01 X-30.64756 Y30.01331
G01 X-30.55881 Y30.05006
G01 X-30.42050 Y30.12400
G01 X-30.34062 Y30.17737
G01 X-30.21939 Y30.27686
G01 X-30.15147 Y30.34478
G01 X-30.05198 Y30.46601
G01 X-29.99861 Y30.54587
G01 X-29.92470 Y30.68418
G01 X-29.88794 Y30.77292
G01 X-29.84240 Y30.92301
G01 X-29.82368 Y31.01722
G01 X-29.80829 Y31.17328
G01 X-29.80829 Y31.26934
G01 X-29.82368 Y31.42542
G01 X-29.84240 Y31.51963
G01 X-29.88794 Y31.66970
G01 X-29.92470 Y31.75844
G01 X-29.99861 Y31.89675
G01 X-30.05198 Y31.97663
G01 X-30.15147 Y32.09786
G01 X-30.21939 Y32.16578
G01 X-30.34062 Y32.26527
G01 X-30.42050 Y32.31864
G01 X-30.55881 Y32.39255
G01 X-30.64756 Y32.42931
G01 X-30.79762 Y32.47485
G01 X-30.88040 Y32.49133
G01 X-32.11141 Y32.49131
G01 X-32.19424 Y32.47485
G01 X-32.34433 Y32.42931
G01 X-32.43307 Y32.39255
G01 X-32.57138 Y32.31864
G01 X-32.65123 Y32.26527
G01 X-32.77247 Y32.16578
G01 X-32.84039 Y32.09786
G01 X-32.87039 Y32.06131
G01 X-33.42980 Y32.06134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.65804 Y32.06131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.65804 Y32.06131
G01 X-35.71519 Y32.16817
G01 X-35.75194 Y32.25692
G01 X-35.79746 Y32.40701
G01 X-35.80993 Y32.46977
G01 X-35.80995 Y32.46980
G01 X-35.79553 Y32.50327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-35.99601 Y32.39334 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-35.99601 Y32.39334
G01 X-35.99555 Y32.39324
G01 X-35.90708 Y32.41694
G01 X-35.81572 Y32.46347
G01 X-35.81105 Y32.46726
G01 X-35.80993 Y32.46977
G01 X-35.79553 Y32.50327
G01 X-35.77170 Y32.56365
G01 X-35.74892 Y32.62738
G01 X-35.73586 Y32.66672
G01 X-35.71298 Y32.74165
G01 X-35.69375 Y32.81945
G01 X-35.69184 Y32.82948
G01 X-35.68285 Y32.87747
G01 X-35.68100 Y32.88813
G01 X-35.67963 Y32.89596
G01 X-35.66441 Y32.96332
G01 X-35.63223 Y33.07896
G01 X-35.61945 Y33.11356
G01 X-35.59248 Y33.17683
G01 X-35.55557 Y33.25280
G01 X-35.51864 Y33.31518
G01 X-35.48064 Y33.37269
G01 X-35.45181 Y33.41196
G01 X-35.38082 Y33.49362
G01 X-35.36261 Y33.51376
G01 X-35.33391 Y33.54432
G01 X-35.28768 Y33.59862
G01 X-35.26756 Y33.62473
G01 X-35.26121 Y33.65379
G01 X-35.24478 Y33.78663
G01 X-35.24445 Y33.79806
G01 X-35.24417 Y33.81831
G01 X-35.24417 Y35.15831
G01 X-35.24333 Y35.19275
G01 X-35.24163 Y35.22707
G01 X-35.23660 Y35.26105
G01 X-35.22316 Y35.32851
G01 X-35.21483 Y35.36184
G01 X-35.20325 Y35.39417
G01 X-35.17693 Y35.45778
G01 X-35.16223 Y35.48884
G01 X-35.14460 Y35.51828
G01 X-35.10632 Y35.57555
G01 X-35.08588 Y35.60309
G01 X-35.06279 Y35.62859
G01 X-35.03906 Y35.65348
G01 X-33.89606 Y36.79648
G01 X-33.87117 Y36.82018
G01 X-33.84572 Y36.84327
G01 X-33.81814 Y36.86372
G01 X-33.76083 Y36.90199
G01 X-33.73139 Y36.91965
G01 X-33.70036 Y36.93433
G01 X-33.63675 Y36.96067
G01 X-33.60445 Y36.97222
G01 X-33.57110 Y36.98058
G01 X-33.50366 Y36.99399
G01 X-33.46965 Y36.99905
G01 X-33.43538 Y37.00072
G01 X-33.40094 Y37.00156
G01 X-33.00843 Y37.00156
G01 X-32.89736 Y37.01038
G01 X-32.83620 Y37.02008
G01 X-32.81476 Y37.02379
G01 X-32.73462 Y37.09105
G01 X-32.72225 Y37.10306
G01 X-32.71095 Y37.11378
G01 X-32.69038 Y37.13285
G01 X-32.68433 Y37.13842
G01 X-32.64290 Y37.17596
G01 X-32.60386 Y37.20613
G01 X-32.56416 Y37.23918
G01 X-32.51936 Y37.27936
G01 X-32.51141 Y37.28640
G01 X-32.47209 Y37.32066
G01 X-32.39381 Y37.39907
G01 X-32.33221 Y37.46958
G01 X-32.28649 Y37.52650
G01 X-32.28646 Y37.52650
G01 X-32.28611 Y37.52699
G01 X-32.19424 Y37.55485
G01 X-32.11141 Y37.57133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.28649 Y37.61617 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.28649 Y37.61617
G01 X-32.28499 Y37.60192
G01 X-32.28499 Y37.54073
G01 X-32.28646 Y37.52650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.88040 Y37.57133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.88040 Y37.57133
G01 X-30.79762 Y37.58779
G01 X-30.64756 Y37.63331
G01 X-30.55881 Y37.67006
G01 X-30.42050 Y37.74400
G01 X-30.34062 Y37.79737
G01 X-30.21939 Y37.89686
G01 X-30.15147 Y37.96478
G01 X-30.05198 Y38.08601
G01 X-29.99861 Y38.16587
G01 X-29.92470 Y38.30418
G01 X-29.88794 Y38.39292
G01 X-29.84240 Y38.54301
G01 X-29.82368 Y38.63722
G01 X-29.80829 Y38.79328
G01 X-29.80829 Y38.88934
G01 X-29.82368 Y39.04542
G01 X-29.84240 Y39.13963
G01 X-29.88794 Y39.28970
G01 X-29.92470 Y39.37844
G01 X-29.99861 Y39.51675
G01 X-30.05198 Y39.59663
G01 X-30.15147 Y39.71786
G01 X-30.21939 Y39.78578
G01 X-30.34062 Y39.88527
G01 X-30.42050 Y39.93864
G01 X-30.55881 Y40.01255
G01 X-30.64756 Y40.04931
G01 X-30.79762 Y40.09485
G01 X-30.88040 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.28646 Y40.06650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.28646 Y40.06650
G01 X-32.28499 Y40.08073
G01 X-32.28499 Y40.14192
G01 X-32.28649 Y40.15617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.11141 Y40.11133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.11141 Y40.11133
G01 X-32.19424 Y40.12779
G01 X-32.28606 Y40.15563
G01 X-32.33229 Y40.21314
G01 X-32.39375 Y40.28355
G01 X-32.47216 Y40.36206
G01 X-32.51136 Y40.39622
G01 X-32.51941 Y40.40333
G01 X-32.56416 Y40.44346
G01 X-32.60386 Y40.47651
G01 X-32.64295 Y40.50671
G01 X-32.68436 Y40.54423
G01 X-32.73302 Y40.59289
G01 X-32.77054 Y40.63432
G01 X-32.83234 Y40.71428
G01 X-32.87173 Y40.77085
G01 X-32.87740 Y40.77986
G01 X-32.94504 Y40.90948
G01 X-32.96025 Y40.94047
G01 X-32.97140 Y40.97311
G01 X-33.01522 Y41.11260
G01 X-33.01760 Y41.12299
G01 X-33.02007 Y41.13419
G01 X-33.02972 Y41.19089
G01 X-33.04260 Y41.29109
G01 X-33.04534 Y41.34692
G01 X-33.04534 Y41.41573
G01 X-33.04260 Y41.47158
G01 X-33.02972 Y41.57178
G01 X-33.01760 Y41.63970
G01 X-33.01522 Y41.65004
G01 X-32.97140 Y41.78956
G01 X-32.96025 Y41.82218
G01 X-32.94504 Y41.85317
G01 X-32.87740 Y41.98278
G01 X-32.87173 Y41.99180
G01 X-32.83234 Y42.04836
G01 X-32.77054 Y42.12832
G01 X-32.73302 Y42.16975
G01 X-32.68436 Y42.21842
G01 X-32.64295 Y42.25593
G01 X-32.60386 Y42.28613
G01 X-32.56416 Y42.31918
G01 X-32.51936 Y42.35936
G01 X-32.51141 Y42.36640
G01 X-32.47209 Y42.40066
G01 X-32.39381 Y42.47907
G01 X-32.33221 Y42.54958
G01 X-32.28649 Y42.60650
G01 X-32.28646 Y42.60650
G01 X-32.28611 Y42.60699
G01 X-32.19424 Y42.63485
G01 X-32.11141 Y42.65131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.28646 Y42.60650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.28646 Y42.60650
G01 X-32.28499 Y42.62073
G01 X-32.28499 Y42.68192
G01 X-32.28649 Y42.69617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-38.84932 Y39.62721 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-38.84932 Y39.62721
G01 X-38.87050 Y39.62274
G01 X-38.97291 Y39.62274
G01 X-39.03377 Y39.62914
G01 X-39.13397 Y39.65045
G01 X-39.14566 Y39.65563
G01 X-39.35694 Y39.44436
G01 X-39.35229 Y39.39734
G01 X-39.35229 Y39.30128
G01 X-39.35694 Y39.25426
G01 X-39.33372 Y39.23107
G01 X-39.14629 Y39.04365
G01 X-39.14507 Y39.04428
G01 X-39.04612 Y39.07108
G01 X-38.94375 Y39.07672
G01 X-38.88264 Y39.07367
G01 X-38.84784 Y39.06826
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.60893 Y37.33496 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.60893 Y37.33496
G01 X-40.67088 Y37.33496
G01 X-40.68673 Y37.32259
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.45307 Y37.97453 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.45307 Y37.97453
G01 X-40.54484 Y38.06630
G01 X-40.59191 Y38.06168
G01 X-40.68797 Y38.06168
G01 X-40.73501 Y38.06630
G01 X-40.82676 Y37.97456
G01 X-40.77949 Y37.93331
G01 X-40.71802 Y37.85155
G01 X-40.67489 Y37.75879
G01 X-40.65503 Y37.70093
G01 X-40.63989 Y37.63506
G01 X-40.62506 Y37.70009
G01 X-40.60527 Y37.75800
G01 X-40.56222 Y37.85086
G01 X-40.50082 Y37.93278
G01 X-40.45307 Y37.97453
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.92295 Y39.25424 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.92295 Y39.25424
G01 X-41.94484 Y39.23234
G01 X-41.95360 Y39.34931
G01 X-41.94484 Y39.46630
G01 X-41.92295 Y39.44441
G01 X-41.92757 Y39.39734
G01 X-41.92757 Y39.30128
G01 X-41.92295 Y39.25424
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.13693 Y34.64127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.13693 Y34.64127
G01 X-44.95411 Y34.45841
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.88555 Y34.64127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.88555 Y34.64127
G01 X-45.13693 Y34.64127
G01 X-45.87493 Y34.94693
G01 X-46.05926 Y35.13126
G01 X-46.34874 Y35.83019
G01 X-46.34605 Y35.88510
G01 X-46.34605 Y35.97743
G01 X-46.35352 Y36.12958
G01 X-46.35565 Y36.13408
G01 X-46.40033 Y36.21784
G01 X-46.48346 Y36.35650
G01 X-46.52802 Y36.42325
G01 X-46.62248 Y36.55061
G01 X-46.66843 Y36.60664
G01 X-46.77386 Y36.72297
G01 X-46.82324 Y36.77233
G01 X-46.93957 Y36.87779
G01 X-46.99553 Y36.92369
G01 X-47.12286 Y37.01812
G01 X-47.18976 Y37.06278
G01 X-47.32845 Y37.14591
G01 X-47.41211 Y37.19054
G01 X-47.44717 Y37.20710
G01 X-47.56690 Y37.21891
G01 X-47.66296 Y37.21891
G01 X-47.81905 Y37.20354
G01 X-47.91326 Y37.18480
G01 X-47.99898 Y37.15879
G01 X-48.06332 Y37.13926
G01 X-48.15207 Y37.10250
G01 X-48.29037 Y37.02859
G01 X-48.37025 Y36.97522
G01 X-48.49149 Y36.87573
G01 X-48.55941 Y36.80781
G01 X-48.65890 Y36.68658
G01 X-48.71226 Y36.60669
G01 X-48.78618 Y36.46839
G01 X-48.82293 Y36.37964
G01 X-48.86847 Y36.22958
G01 X-48.88493 Y36.14667
G01 X-48.88493 Y35.71566
G01 X-48.86847 Y35.63296
G01 X-48.83822 Y35.53329
G01 X-48.82573 Y35.52354
G01 X-48.78867 Y35.49331
G01 X-48.71615 Y35.43154
G01 X-48.61737 Y35.33187
G01 X-48.60309 Y35.31465
G01 X-48.60279 Y35.31429
G01 X-48.55476 Y35.26141
G01 X-48.53439 Y35.23794
G01 X-48.45184 Y35.14299
G01 X-48.40411 Y35.09326
G01 X-48.39464 Y35.08429
G01 X-48.28227 Y34.99448
G01 X-48.24508 Y34.96674
G01 X-48.22527 Y34.95567
G01 X-48.08717 Y34.88140
G01 X-48.07767 Y34.87637
G01 X-48.02303 Y34.85618
G01 X-47.96413 Y34.83713
G01 X-47.91465 Y34.81907
G01 X-47.88735 Y34.80794
G01 X-47.87531 Y34.80291
G01 X-47.80769 Y34.77391
G01 X-47.72159 Y34.73083
G01 X-47.66340 Y34.69748
G01 X-47.65794 Y34.69433
G01 X-47.57079 Y34.64363
G01 X-47.56690 Y34.64363
G01 X-47.51984 Y34.64825
G01 X-46.05705 Y33.18547
G01 X-46.06650 Y33.13799
G01 X-46.07178 Y33.08435
G01 X-46.07414 Y33.03632
G01 X-46.07414 Y31.78631
G01 X-46.07178 Y31.73828
G01 X-46.07104 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.53414 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.53414 Y31.73132
G01 X-46.53414 Y33.31132
G01 X-46.54356 Y33.40690
G01 X-46.57142 Y33.49883
G01 X-46.61671 Y33.58353
G01 X-46.67765 Y33.65780
G01 X-46.75192 Y33.71874
G01 X-46.83663 Y33.76400
G01 X-46.92855 Y33.79189
G01 X-47.02413 Y33.80131
G01 X-48.12413 Y33.80131
G01 X-48.21973 Y33.79189
G01 X-48.31166 Y33.76400
G01 X-48.39636 Y33.71874
G01 X-48.47061 Y33.65780
G01 X-48.53157 Y33.58353
G01 X-48.57683 Y33.49883
G01 X-48.60472 Y33.40690
G01 X-48.61414 Y33.31132
G01 X-48.61414 Y33.25133
G01 X-48.63411 Y33.25133
G01 X-48.63411 Y33.34762
G01 X-48.62956 Y33.39878
G01 X-48.60017 Y33.50147
G01 X-48.55214 Y33.59342
G01 X-48.48661 Y33.67381
G01 X-48.40622 Y33.73934
G01 X-48.31427 Y33.78737
G01 X-48.21153 Y33.81678
G01 X-48.16037 Y33.82133
G01 X-48.11066 Y33.82133
G01 X-48.03403 Y33.82735
G01 X-47.95931 Y33.84528
G01 X-47.90111 Y33.86418
G01 X-47.80749 Y33.90586
G01 X-47.72461 Y33.96608
G01 X-47.65603 Y34.04223
G01 X-47.62006 Y34.09174
G01 X-47.56886 Y34.18043
G01 X-47.53721 Y34.27787
G01 X-47.52649 Y34.37972
G01 X-47.52649 Y34.44091
G01 X-47.53721 Y34.54279
G01 X-47.56886 Y34.64023
G01 X-47.57079 Y34.64363
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.88493 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.88493 Y35.71566
G01 X-48.90142 Y35.63296
G01 X-48.93164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.83822 Y35.53329 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.83822 Y35.53329
G01 X-48.88641 Y35.53570
G01 X-48.93164 Y35.53324
G01 X-48.98237 Y35.49359
G01 X-49.05354 Y35.43151
G01 X-49.12011 Y35.36664
G01 X-49.16278 Y35.32003
G01 X-49.16764 Y35.31467
G01 X-49.21531 Y35.26161
G01 X-49.23832 Y35.23466
G01 X-49.31800 Y35.14299
G01 X-49.36576 Y35.09326
G01 X-49.37523 Y35.08429
G01 X-49.48757 Y34.99450
G01 X-49.52484 Y34.96669
G01 X-49.54457 Y34.95567
G01 X-49.68267 Y34.88140
G01 X-49.69220 Y34.87637
G01 X-49.74681 Y34.85618
G01 X-49.83662 Y34.82714
G01 X-49.89527 Y34.80527
G01 X-49.94178 Y34.78556
G01 X-49.96248 Y34.77716
G01 X-50.00078 Y34.76222
G01 X-50.11328 Y34.70837
G01 X-50.20149 Y34.65816
G01 X-50.21914 Y34.64787
G01 X-50.22234 Y34.64602
G01 X-50.35415 Y34.70835
G01 X-50.43149 Y34.74960
G01 X-50.57015 Y34.83273
G01 X-50.63134 Y34.87358
G01 X-50.75867 Y34.96801
G01 X-50.80967 Y35.00985
G01 X-50.92603 Y35.11528
G01 X-50.97091 Y35.16016
G01 X-51.07634 Y35.27652
G01 X-51.11815 Y35.32747
G01 X-51.21261 Y35.45480
G01 X-51.25351 Y35.51609
G01 X-51.33664 Y35.65480
G01 X-51.37787 Y35.73204
G01 X-51.42491 Y35.83156
G01 X-51.42493 Y35.88498
G01 X-51.42493 Y36.14667
G01 X-51.40847 Y36.22958
G01 X-51.36293 Y36.37964
G01 X-51.32618 Y36.46839
G01 X-51.25226 Y36.60669
G01 X-51.19890 Y36.68658
G01 X-51.09941 Y36.80781
G01 X-51.03149 Y36.87573
G01 X-50.99491 Y36.90573
G01 X-50.99491 Y38.21484
G01 X-52.36405 Y39.58395
G01 X-52.41111 Y39.57933
G01 X-52.50718 Y39.57933
G01 X-52.66323 Y39.59470
G01 X-52.75744 Y39.61344
G01 X-52.90753 Y39.65896
G01 X-52.99628 Y39.69571
G01 X-53.13458 Y39.76965
G01 X-53.21444 Y39.82302
G01 X-53.33567 Y39.92251
G01 X-53.40359 Y39.99043
G01 X-53.48414 Y40.08855
G01 X-53.50308 Y40.11166
G01 X-53.55645 Y40.19152
G01 X-53.63039 Y40.32983
G01 X-53.66714 Y40.41857
G01 X-53.71266 Y40.56866
G01 X-53.72914 Y40.65144
G01 X-53.72912 Y40.96670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.52534 Y42.15283 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.52534 Y42.15283
G01 X-50.84119 Y43.83698
G01 X-50.67706 Y43.83698
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.93817 Y42.88702 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.93817 Y42.88702
G01 X-49.69077 Y42.13439
G01 X-49.71503 Y42.13922
G01 X-49.87111 Y42.15461
G01 X-49.96718 Y42.15461
G01 X-49.98534 Y42.15283
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.26704 Y44.78699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.26704 Y44.78699
G01 X-54.90407 Y42.14996
G01 X-54.95111 Y42.15461
G01 X-55.04718 Y42.15461
G01 X-55.06534 Y42.15283
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.26914 Y40.96670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.26914 Y40.96670
G01 X-56.26912 Y40.89101
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.26912 Y40.65144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.26912 Y40.65144
G01 X-56.28560 Y40.56866
G01 X-56.33112 Y40.41857
G01 X-56.36790 Y40.32983
G01 X-56.44181 Y40.19152
G01 X-56.49518 Y40.11166
G01 X-56.59467 Y39.99043
G01 X-56.66259 Y39.92251
G01 X-56.78383 Y39.82302
G01 X-56.86371 Y39.76965
G01 X-57.00201 Y39.69571
G01 X-57.09076 Y39.65896
G01 X-57.24082 Y39.61344
G01 X-57.33503 Y39.59470
G01 X-57.49111 Y39.57933
G01 X-57.58718 Y39.57933
G01 X-57.63422 Y39.58395
G01 X-59.47493 Y37.74324
G01 X-59.47493 Y36.90570
G01 X-59.43840 Y36.87573
G01 X-59.37048 Y36.80781
G01 X-59.28992 Y36.70964
G01 X-59.27099 Y36.68658
G01 X-59.21763 Y36.60669
G01 X-59.14369 Y36.46839
G01 X-59.10693 Y36.37964
G01 X-59.06142 Y36.22958
G01 X-59.04491 Y36.14667
G01 X-59.04491 Y35.71566
G01 X-59.02847 Y35.63296
G01 X-58.99822 Y35.53329
G01 X-58.98573 Y35.52354
G01 X-58.94867 Y35.49331
G01 X-58.87615 Y35.43154
G01 X-58.77737 Y35.33187
G01 X-58.76309 Y35.31465
G01 X-58.76279 Y35.31429
G01 X-58.71476 Y35.26141
G01 X-58.69439 Y35.23794
G01 X-58.61184 Y35.14299
G01 X-58.56411 Y35.09326
G01 X-58.55464 Y35.08429
G01 X-58.44227 Y34.99448
G01 X-58.40508 Y34.96674
G01 X-58.38527 Y34.95567
G01 X-58.24717 Y34.88140
G01 X-58.23767 Y34.87637
G01 X-58.18303 Y34.85618
G01 X-58.05746 Y34.81559
G01 X-58.03320 Y34.80990
G01 X-57.96538 Y34.79750
G01 X-57.86990 Y34.78483
G01 X-57.80932 Y34.78186
G01 X-57.80107 Y34.78150
G01 X-57.77349 Y34.78048
G01 X-57.75797 Y34.78008
G01 X-57.74031 Y34.77980
G01 X-57.63602 Y34.77068
G01 X-57.61829 Y34.75818
G01 X-57.56815 Y34.72176
G01 X-57.48339 Y34.64945
G01 X-57.31875 Y34.48480
G01 X-57.29962 Y34.46491
G01 X-57.28908 Y34.45351
G01 X-57.20661 Y34.34520
G01 X-57.20564 Y34.33921
G01 X-57.19597 Y34.27802
G01 X-57.18718 Y34.16715
G01 X-57.18718 Y34.01960
G01 X-57.19444 Y33.91876
G01 X-57.20249 Y33.86286
G01 X-57.27585 Y33.62575
G01 X-57.30493 Y33.56459
G01 X-57.31375 Y33.54645
G01 X-57.32665 Y33.53451
G01 X-57.36780 Y33.49855
G01 X-57.37338 Y33.49390
G01 X-57.37501 Y33.49258
G01 X-57.37674 Y33.49146
G01 X-57.47224 Y33.45443
G01 X-57.57336 Y33.43807
G01 X-57.63445 Y33.43467
G01 X-57.73673 Y33.43969
G01 X-57.83574 Y33.46586
G01 X-57.92716 Y33.51203
G01 X-57.97859 Y33.54518
G01 X-58.03978 Y33.59182
G01 X-58.09294 Y33.64744
G01 X-58.11443 Y33.67381
G01 X-58.18692 Y33.73291
G01 X-58.18692 Y33.70413
G01 X-58.13046 Y33.65780
G01 X-58.06952 Y33.58353
G01 X-58.02423 Y33.49883
G01 X-57.99634 Y33.40690
G01 X-57.98695 Y33.31132
G01 X-57.98695 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.52385 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.52385 Y31.73132
G01 X-57.52457 Y31.73828
G01 X-57.52693 Y31.78631
G01 X-57.52693 Y33.03632
G01 X-57.52457 Y33.08435
G01 X-57.51928 Y33.13799
G01 X-57.50056 Y33.23220
G01 X-57.48492 Y33.28379
G01 X-57.44814 Y33.37254
G01 X-57.42274 Y33.42009
G01 X-57.37338 Y33.49390
G01 X-57.37338 Y33.49392
G01 X-57.36780 Y33.49855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.91531 Y31.12921 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.91531 Y31.12921
G01 X-59.91531 Y31.15819
G01 X-59.92342 Y31.16482
G01 X-59.98435 Y31.23909
G01 X-60.02964 Y31.32380
G01 X-60.05753 Y31.41572
G01 X-60.06693 Y31.51130
G01 X-60.06693 Y31.57132
G01 X-60.08692 Y31.57132
G01 X-60.08692 Y31.47508
G01 X-60.08237 Y31.42390
G01 X-60.05298 Y31.32116
G01 X-60.00498 Y31.22926
G01 X-59.93939 Y31.14884
G01 X-59.91531 Y31.12921
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.57111 Y27.66854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.57111 Y27.66854
G01 X-63.57114 Y27.63541
G01 X-63.57111 Y27.48954
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.57111 Y27.46610 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.57111 Y27.46610
G01 X-63.58760 Y27.38334
G01 X-63.63314 Y27.23331
G01 X-63.66989 Y27.14456
G01 X-63.74383 Y27.00623
G01 X-63.79720 Y26.92635
G01 X-63.89669 Y26.80514
G01 X-63.95534 Y26.74646
G01 X-63.95534 Y26.71654
G01 X-63.87812 Y26.78820
G01 X-63.82745 Y26.85170
G01 X-63.77705 Y26.90590
G01 X-63.75516 Y26.92617
G01 X-63.72869 Y26.94545
G01 X-63.66326 Y26.99317
G01 X-63.55841 Y27.03714
G01 X-63.49964 Y27.05411
G01 X-63.43357 Y27.06589
G01 X-63.35821 Y27.02769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.81292 Y24.63161 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.81292 Y24.63161
G01 X-63.83166 Y24.67286
G01 X-63.90957 Y24.78533
G01 X-63.95531 Y24.83110
G01 X-63.95531 Y24.79945
G01 X-63.93979 Y24.78388
G01 X-63.90870 Y24.74604
G01 X-63.85534 Y24.66615
G01 X-63.83222 Y24.62292
G01 X-63.82854 Y24.61401
G01 X-63.82755 Y24.61538
G01 X-63.81292 Y24.63161
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.52193 Y22.09837 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.52193 Y22.09837
G01 X-65.52193 Y22.80408
G01 X-65.52795 Y22.88071
G01 X-65.54589 Y22.95544
G01 X-65.56478 Y23.01363
G01 X-65.60326 Y23.10164
G01 X-65.65818 Y23.18046
G01 X-65.66826 Y23.19227
G01 X-65.67802 Y23.20281
G01 X-65.73898 Y23.29079
G01 X-65.72488 Y23.30103
G01 X-65.72115 Y23.30515
G01 X-65.68198 Y23.24652
G01 X-65.65089 Y23.20863
G01 X-65.58297 Y23.14071
G01 X-65.54507 Y23.10962
G01 X-65.46522 Y23.05625
G01 X-65.42198 Y23.03316
G01 X-65.33324 Y22.99638
G01 X-65.28635 Y22.98216
G01 X-65.19214 Y22.96341
G01 X-65.14337 Y22.95861
G01 X-65.09534 Y22.95625
G01 X-64.49534 Y22.95625
G01 X-64.44731 Y22.95861
G01 X-64.39854 Y22.96341
G01 X-64.30433 Y22.98216
G01 X-64.25742 Y22.99638
G01 X-64.16867 Y23.03316
G01 X-64.12547 Y23.05625
G01 X-64.04558 Y23.10962
G01 X-64.00771 Y23.14071
G01 X-63.93979 Y23.20863
G01 X-63.90870 Y23.24652
G01 X-63.85534 Y23.32638
G01 X-63.83222 Y23.36961
G01 X-63.82951 Y23.37619
G01 X-63.81706 Y23.35909
G01 X-63.81472 Y23.35699
G01 X-63.83166 Y23.31970
G01 X-63.85712 Y23.28295
G01 X-63.89458 Y23.21901
G01 X-63.92199 Y23.15015
G01 X-63.93961 Y23.09377
G01 X-63.95633 Y23.02150
G01 X-63.96194 Y22.94754
G01 X-63.96192 Y22.00604
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.63532 Y24.79945 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.63532 Y24.79945
G01 X-65.65089 Y24.78388
G01 X-65.68198 Y24.74604
G01 X-65.72325 Y24.68426
G01 X-65.74040 Y24.69971
G01 X-65.68109 Y24.78530
G01 X-65.63532 Y24.83110
G01 X-65.63532 Y24.79945
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.68114 Y26.67407 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.68114 Y26.67407
G01 X-65.80410 Y26.78817
G01 X-65.84680 Y26.84166
G01 X-65.81558 Y26.84166
G01 X-65.78559 Y26.80514
G01 X-65.71767 Y26.73719
G01 X-65.68114 Y26.70722
G01 X-65.68114 Y26.67407
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.68114 Y28.65611 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.68114 Y28.65611
G01 X-65.71767 Y28.62612
G01 X-65.78559 Y28.55822
G01 X-65.81558 Y28.52167
G01 X-65.84680 Y28.52167
G01 X-65.80410 Y28.57519
G01 X-65.68114 Y28.68928
G01 X-65.68114 Y28.65611
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.68111 Y31.18161 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.68111 Y31.18161
G01 X-65.71998 Y31.22926
G01 X-65.76798 Y31.32116
G01 X-65.79737 Y31.42390
G01 X-65.80192 Y31.47508
G01 X-65.80192 Y31.57132
G01 X-65.78193 Y31.57132
G01 X-65.78193 Y31.51130
G01 X-65.77253 Y31.41572
G01 X-65.74464 Y31.32380
G01 X-65.69935 Y31.23909
G01 X-65.68111 Y31.21686
G01 X-65.68111 Y31.18161
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61230 Y32.74988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61230 Y32.74988
G01 X-69.70402 Y32.72194
G01 X-69.78677 Y32.70548
G01 X-70.21781 Y32.70548
G01 X-70.30064 Y32.72194
G01 X-70.39172 Y32.74955
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39215 Y32.66124 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39215 Y32.66124
G01 X-70.30064 Y32.68900
G01 X-70.21781 Y32.70548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.78677 Y32.70548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.78677 Y32.70548
G01 X-69.70402 Y32.68900
G01 X-69.61283 Y32.66134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.21781 Y30.16548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.21781 Y30.16548
G01 X-70.30064 Y30.14900
G01 X-70.39215 Y30.12124
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y30.20955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y30.20955
G01 X-70.38994 Y30.15408
G01 X-70.39215 Y30.12124
G01 X-70.43838 Y30.06294
G01 X-70.50008 Y29.99297
G01 X-70.56620 Y29.92593
G01 X-70.61301 Y29.88377
G01 X-70.61743 Y29.87983
G01 X-70.67023 Y29.83297
G01 X-70.69784 Y29.80973
G01 X-70.78202 Y29.74244
G01 X-70.79152 Y29.73348
G01 X-70.83922 Y29.68377
G01 X-70.91021 Y29.60211
G01 X-70.93904 Y29.56284
G01 X-70.97704 Y29.50534
G01 X-71.01397 Y29.44295
G01 X-71.05088 Y29.36698
G01 X-71.07785 Y29.30371
G01 X-71.09063 Y29.26912
G01 X-71.12281 Y29.15347
G01 X-71.13803 Y29.08613
G01 X-71.13820 Y29.08502
G01 X-71.15227 Y28.92992
G01 X-71.15454 Y28.89548
G01 X-71.15227 Y28.86101
G01 X-71.13820 Y28.70595
G01 X-71.13803 Y28.70485
G01 X-71.12281 Y28.63749
G01 X-71.09063 Y28.52185
G01 X-71.07785 Y28.48723
G01 X-71.05083 Y28.42396
G01 X-71.01397 Y28.34798
G01 X-70.97701 Y28.28563
G01 X-70.93907 Y28.22817
G01 X-70.91024 Y28.18885
G01 X-70.83922 Y28.10719
G01 X-70.79147 Y28.05746
G01 X-70.78207 Y28.04854
G01 X-70.69792 Y27.98129
G01 X-70.67023 Y27.95799
G01 X-70.62228 Y27.91545
G01 X-70.61735 Y27.91113
G01 X-70.57981 Y27.87842
G01 X-70.49995 Y27.79813
G01 X-70.43864 Y27.72744
G01 X-70.39581 Y27.67491
G01 X-70.39172 Y27.66958
G01 X-70.30064 Y27.64197
G01 X-70.21781 Y27.62546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y27.66958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y27.66958
G01 X-70.38994 Y27.61408
G01 X-70.39228 Y27.58103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.21781 Y25.08548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.21781 Y25.08548
G01 X-70.30064 Y25.06900
G01 X-70.39215 Y25.04124
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y25.12955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y25.12955
G01 X-70.38994 Y25.07408
G01 X-70.39215 Y25.04124
G01 X-70.43838 Y24.98297
G01 X-70.50008 Y24.91297
G01 X-70.56612 Y24.84604
G01 X-70.61293 Y24.80382
G01 X-70.67023 Y24.75297
G01 X-70.69789 Y24.72968
G01 X-70.78202 Y24.66244
G01 X-70.79152 Y24.65353
G01 X-70.83922 Y24.60377
G01 X-70.91021 Y24.52211
G01 X-70.93904 Y24.48284
G01 X-70.97704 Y24.42534
G01 X-71.01397 Y24.36295
G01 X-71.05088 Y24.28698
G01 X-71.07785 Y24.22371
G01 X-71.09063 Y24.18912
G01 X-71.12281 Y24.07347
G01 X-71.13803 Y24.00611
G01 X-71.13820 Y24.00502
G01 X-71.15227 Y23.84992
G01 X-71.15454 Y23.81548
G01 X-71.15227 Y23.78101
G01 X-71.13820 Y23.62595
G01 X-71.13803 Y23.62485
G01 X-71.12281 Y23.55749
G01 X-71.09063 Y23.44185
G01 X-71.07785 Y23.40723
G01 X-71.05083 Y23.34396
G01 X-71.01397 Y23.26798
G01 X-70.97701 Y23.20560
G01 X-70.93907 Y23.14815
G01 X-70.91024 Y23.10885
G01 X-70.83922 Y23.02719
G01 X-70.79147 Y22.97746
G01 X-70.78204 Y22.96852
G01 X-70.69784 Y22.90123
G01 X-70.67023 Y22.87799
G01 X-70.62235 Y22.83550
G01 X-70.61735 Y22.83110
G01 X-70.57986 Y22.79847
G01 X-70.49995 Y22.71813
G01 X-70.43864 Y22.64744
G01 X-70.39581 Y22.59491
G01 X-70.39172 Y22.58955
G01 X-70.30064 Y22.56194
G01 X-70.21781 Y22.54546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y22.58955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y22.58955
G01 X-70.38994 Y22.53408
G01 X-70.39228 Y22.50103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.78912 Y16.65111 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.78912 Y16.65111
G01 X-65.82163 Y16.59474
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.71119 Y16.58512 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.71119 Y16.58512
G01 X-65.73661 Y16.59530
G01 X-65.82064 Y16.59530
G01 X-65.82163 Y16.59474
G01 X-65.82165 Y16.59474
G01 X-65.83123 Y16.58959
G01 X-65.89242 Y16.55842
G01 X-66.14510 Y16.47404
G01 X-66.20629 Y16.46437
G01 X-66.31716 Y16.45558
G01 X-67.53587 Y16.45558
G01 X-67.57034 Y16.45474
G01 X-67.60461 Y16.45304
G01 X-67.63862 Y16.44801
G01 X-67.70603 Y16.43457
G01 X-67.73943 Y16.42622
G01 X-67.77171 Y16.41466
G01 X-67.83529 Y16.38834
G01 X-67.86640 Y16.37364
G01 X-67.89582 Y16.35601
G01 X-67.95309 Y16.31773
G01 X-67.98070 Y16.29726
G01 X-68.00613 Y16.27420
G01 X-68.03105 Y16.25050
G01 X-68.10420 Y16.17730
G01 X-69.53529 Y14.74623
G01 X-69.60846 Y14.67308
G01 X-69.63219 Y14.64819
G01 X-69.65528 Y14.62269
G01 X-69.67570 Y14.59515
G01 X-69.71397 Y14.53788
G01 X-69.73163 Y14.50844
G01 X-69.74631 Y14.47738
G01 X-69.77265 Y14.41377
G01 X-69.78418 Y14.38146
G01 X-69.79256 Y14.34811
G01 X-69.80595 Y14.28065
G01 X-69.80775 Y14.26854
G01 X-69.81103 Y14.24662
G01 X-69.81273 Y14.21235
G01 X-69.81354 Y14.17791
G01 X-69.81354 Y13.53826
G01 X-69.81385 Y13.51804
G01 X-69.81418 Y13.50661
G01 X-69.83061 Y13.37372
G01 X-69.83694 Y13.34474
G01 X-69.85713 Y13.31858
G01 X-69.90328 Y13.26432
G01 X-69.93201 Y13.23377
G01 X-69.95025 Y13.21360
G01 X-70.02121 Y13.13196
G01 X-70.05007 Y13.09264
G01 X-70.08801 Y13.03519
G01 X-70.12497 Y12.97281
G01 X-70.16183 Y12.89683
G01 X-70.18880 Y12.83356
G01 X-70.20163 Y12.79894
G01 X-70.23379 Y12.68332
G01 X-70.24900 Y12.61596
G01 X-70.24920 Y12.61487
G01 X-70.26327 Y12.45978
G01 X-70.26554 Y12.42533
G01 X-70.26327 Y12.39087
G01 X-70.24920 Y12.23577
G01 X-70.24900 Y12.23471
G01 X-70.23381 Y12.16735
G01 X-70.20163 Y12.05170
G01 X-70.18885 Y12.01708
G01 X-70.16183 Y11.95381
G01 X-70.12497 Y11.87784
G01 X-70.08801 Y11.81546
G01 X-70.05007 Y11.75800
G01 X-70.02121 Y11.71868
G01 X-69.95025 Y11.63705
G01 X-69.90249 Y11.58731
G01 X-69.89302 Y11.57835
G01 X-69.80887 Y11.51111
G01 X-69.78126 Y11.48782
G01 X-69.73330 Y11.44528
G01 X-69.72838 Y11.44096
G01 X-69.69081 Y11.40824
G01 X-69.61095 Y11.32795
G01 X-69.54964 Y11.25726
G01 X-69.50696 Y11.20494
G01 X-69.50270 Y11.19940
G01 X-69.41164 Y11.17179
G01 X-69.32881 Y11.15533
G01 X-68.89777 Y11.15533
G01 X-68.81499 Y11.17179
G01 X-68.66495 Y11.21731
G01 X-68.57621 Y11.25406
G01 X-68.43790 Y11.32800
G01 X-68.35802 Y11.38137
G01 X-68.23679 Y11.48086
G01 X-68.16887 Y11.54878
G01 X-68.06935 Y11.67001
G01 X-68.01601 Y11.74987
G01 X-67.94210 Y11.88818
G01 X-67.90534 Y11.97692
G01 X-67.85980 Y12.12701
G01 X-67.84108 Y12.22122
G01 X-67.82569 Y12.37728
G01 X-67.82569 Y12.47334
G01 X-67.84108 Y12.62942
G01 X-67.85980 Y12.72363
G01 X-67.90534 Y12.87370
G01 X-67.94210 Y12.96244
G01 X-68.01601 Y13.10075
G01 X-68.06935 Y13.18063
G01 X-68.16887 Y13.30186
G01 X-68.23679 Y13.36978
G01 X-68.27334 Y13.39975
G01 X-68.27334 Y13.82998
G01 X-67.18794 Y14.91532
G01 X-64.61086 Y14.91532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.59110 Y17.83150 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.59110 Y17.83150
G01 X-63.63314 Y17.97005
G01 X-63.66989 Y18.05880
G01 X-63.74383 Y18.19710
G01 X-63.79720 Y18.27696
G01 X-63.87332 Y18.36975
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.42303 Y18.49980 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.42303 Y18.49980
G01 X-63.58942 Y18.32586
G01 X-63.61526 Y18.32347
G01 X-63.67642 Y18.32347
G01 X-63.77827 Y18.33419
G01 X-63.86077 Y18.36098
G01 X-63.90466 Y18.39164
G01 X-63.95358 Y18.43198
G01 X-63.97505 Y18.44917
G01 X-63.99222 Y18.48288
G01 X-64.07657 Y18.73541
G01 X-64.08627 Y18.79659
G01 X-64.09509 Y18.90762
G01 X-64.09509 Y20.27734
G01 X-64.09501 Y20.28704
G01 X-64.09494 Y20.29255
G01 X-64.08274 Y20.41396
G01 X-64.07754 Y20.44168
G01 X-64.05846 Y20.47017
G01 X-64.04342 Y20.49380
G01 X-64.01559 Y20.53434
G01 X-63.99501 Y20.56217
G01 X-63.99283 Y20.56515
G01 X-63.97787 Y20.59204
G01 X-63.95496 Y20.63538
G01 X-63.93649 Y20.67304
G01 X-63.92844 Y20.69852
G01 X-63.91457 Y20.74554
G01 X-63.90253 Y20.79227
G01 X-63.90027 Y20.81308
G01 X-63.89618 Y20.85671
G01 X-63.89593 Y20.86187
G01 X-63.89585 Y20.86334
G01 X-63.89430 Y20.89626
G01 X-63.89290 Y20.91854
G01 X-63.89047 Y20.94950
G01 X-63.85864 Y21.11300
G01 X-63.85864 Y21.49626
G01 X-63.85955 Y21.53423
G01 X-63.86197 Y21.58325
G01 X-63.86961 Y21.66062
G01 X-63.87690 Y21.70964
G01 X-63.89301 Y21.79042
G01 X-63.90527 Y21.83939
G01 X-63.93187 Y21.92687
G01 X-63.94939 Y21.97589
G01 X-63.96192 Y22.00604
G01 X-64.00771 Y22.05181
G01 X-64.04558 Y22.08290
G01 X-64.12547 Y22.13626
G01 X-64.16867 Y22.15938
G01 X-64.25742 Y22.19613
G01 X-64.30433 Y22.21035
G01 X-64.35531 Y22.22049
G01 X-64.39854 Y22.22910
G01 X-64.44731 Y22.23390
G01 X-64.49534 Y22.23626
G01 X-65.09534 Y22.23626
G01 X-65.14337 Y22.23390
G01 X-65.19214 Y22.22910
G01 X-65.28635 Y22.21035
G01 X-65.33324 Y22.19613
G01 X-65.42198 Y22.15938
G01 X-65.46522 Y22.13626
G01 X-65.52193 Y22.09837
G01 X-65.53606 Y22.07208
G01 X-65.55925 Y22.02305
G01 X-65.59470 Y21.93769
G01 X-65.61223 Y21.88866
G01 X-65.63534 Y21.81264
G01 X-65.64804 Y21.76194
G01 X-65.66024 Y21.71279
G01 X-65.66450 Y21.69451
G01 X-65.66641 Y21.68587
G01 X-65.67619 Y21.64680
G01 X-65.67857 Y21.63824
G01 X-65.68813 Y21.60025
G01 X-65.69039 Y21.57947
G01 X-65.69448 Y21.53583
G01 X-65.69473 Y21.53068
G01 X-65.69557 Y21.49626
G01 X-65.69557 Y20.89626
G01 X-65.69473 Y20.86187
G01 X-65.69448 Y20.85671
G01 X-65.69039 Y20.81308
G01 X-65.68813 Y20.79230
G01 X-65.67611 Y20.74569
G01 X-65.66224 Y20.69870
G01 X-65.65414 Y20.67304
G01 X-65.63567 Y20.63538
G01 X-65.61279 Y20.59204
G01 X-65.59783 Y20.56512
G01 X-65.58614 Y20.54935
G01 X-65.57494 Y20.53446
G01 X-65.54680 Y20.49413
G01 X-65.51726 Y20.44853
G01 X-65.51284 Y20.44178
G01 X-65.50436 Y20.38839
G01 X-65.49557 Y20.27734
G01 X-65.49557 Y18.68438
G01 X-65.49585 Y18.66416
G01 X-65.49618 Y18.65273
G01 X-65.51261 Y18.51989
G01 X-65.52135 Y18.47981
G01 X-65.52361 Y18.47691
G01 X-65.53458 Y18.46266
G01 X-65.61147 Y18.37749
G01 X-65.63031 Y18.35969
G01 X-65.67804 Y18.30996
G01 X-65.73151 Y18.24846
G01 X-65.74901 Y18.22832
G01 X-65.77786 Y18.18900
G01 X-65.81579 Y18.13160
G01 X-65.85277 Y18.06916
G01 X-65.88965 Y17.99324
G01 X-65.91667 Y17.92984
G01 X-65.92945 Y17.89530
G01 X-65.96163 Y17.77960
G01 X-65.97682 Y17.71232
G01 X-65.97700 Y17.71125
G01 X-65.99105 Y17.55613
G01 X-65.99333 Y17.52167
G01 X-65.99105 Y17.48722
G01 X-65.97700 Y17.33211
G01 X-65.97682 Y17.33104
G01 X-65.96161 Y17.26373
G01 X-65.92945 Y17.14811
G01 X-65.91820 Y17.11765
G01 X-65.91667 Y17.11349
G01 X-65.90550 Y17.08514
G01 X-65.89872 Y17.06899
G01 X-65.89486 Y17.05995
G01 X-65.89041 Y17.04971
G01 X-65.85163 Y16.93541
G01 X-65.84215 Y16.89766
G01 X-65.83590 Y16.87425
G01 X-65.82038 Y16.81946
G01 X-65.78871 Y16.64892
G01 X-65.78559 Y16.64511
G01 X-65.73524 Y16.59477
G01 X-65.71119 Y16.58512
G01 X-65.55434 Y16.52901
G01 X-65.47377 Y16.50450
G01 X-65.31693 Y16.46520
G01 X-65.24771 Y16.45139
G01 X-65.09090 Y16.42815
G01 X-65.02823 Y16.42195
G01 X-64.87139 Y16.41425
G01 X-64.81086 Y16.41425
G01 X-64.65402 Y16.42195
G01 X-64.59135 Y16.42815
G01 X-64.43453 Y16.45139
G01 X-64.36532 Y16.46520
G01 X-64.20847 Y16.50450
G01 X-64.12790 Y16.52901
G01 X-63.97106 Y16.58512
G01 X-63.94647 Y16.59533
G01 X-63.89669 Y16.64511
G01 X-63.79720 Y16.76635
G01 X-63.74383 Y16.84623
G01 X-63.66989 Y16.98453
G01 X-63.63314 Y17.07328
G01 X-63.59110 Y17.21181
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.94647 Y16.59533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.94647 Y16.59533
G01 X-63.55005 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.56944 Y13.96534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.56944 Y13.96534
G01 X-63.18498 Y13.96534
G01 X-64.52834 Y12.62198
G01 X-64.52369 Y12.57494
G01 X-64.52369 Y12.47888
G01 X-64.53908 Y12.32282
G01 X-64.55780 Y12.22861
G01 X-64.60334 Y12.07852
G01 X-64.64010 Y11.98978
G01 X-64.71401 Y11.85147
G01 X-64.76738 Y11.77161
G01 X-64.86687 Y11.65038
G01 X-64.93479 Y11.58246
G01 X-65.05602 Y11.48297
G01 X-65.13590 Y11.42960
G01 X-65.27421 Y11.35566
G01 X-65.36295 Y11.31891
G01 X-65.51302 Y11.27339
G01 X-65.59580 Y11.25691
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.02681 Y11.25691 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.02681 Y11.25691
G01 X-66.10964 Y11.24045
G01 X-66.25973 Y11.19491
G01 X-66.34847 Y11.15815
G01 X-66.48678 Y11.08424
G01 X-66.56664 Y11.03087
G01 X-66.68787 Y10.93138
G01 X-66.75579 Y10.86346
G01 X-66.85528 Y10.74223
G01 X-66.90865 Y10.66235
G01 X-66.98259 Y10.52404
G01 X-67.01934 Y10.43530
G01 X-67.06486 Y10.28523
G01 X-67.08360 Y10.19102
G01 X-67.09897 Y10.03494
G01 X-67.09897 Y9.93888
G01 X-67.08360 Y9.78282
G01 X-67.06486 Y9.68861
G01 X-67.01934 Y9.53852
G01 X-66.98259 Y9.44978
G01 X-66.90865 Y9.31147
G01 X-66.85528 Y9.23161
G01 X-66.75579 Y9.11038
G01 X-66.68787 Y9.04246
G01 X-66.58292 Y8.95633
G01 X-66.58292 Y7.98204
G01 X-66.75170 Y7.89182
G01 X-66.83158 Y7.83845
G01 X-67.04375 Y7.66433
G01 X-67.11167 Y7.59641
G01 X-67.28573 Y7.38427
G01 X-67.33913 Y7.30439
G01 X-67.46851 Y7.06235
G01 X-67.49292 Y7.00335
G01 X-67.49292 Y4.88781
G01 X-67.51022 Y4.84600
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.47583 Y4.84653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.47583 Y4.84653
G01 X-67.49292 Y4.88781
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.49292 Y7.00335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.49292 Y7.00335
G01 X-67.51736 Y7.06235
G01 X-67.64674 Y7.30439
G01 X-67.70011 Y7.38427
G01 X-67.73793 Y7.43035
G01 X-67.87420 Y7.59641
G01 X-67.94215 Y7.66433
G01 X-68.15429 Y7.83845
G01 X-68.23412 Y7.89182
G01 X-68.40293 Y7.98201
G01 X-68.40293 Y8.81137
G01 X-68.35802 Y8.84137
G01 X-68.23679 Y8.94086
G01 X-68.16887 Y9.00878
G01 X-68.06935 Y9.13001
G01 X-68.01601 Y9.20987
G01 X-67.94210 Y9.34818
G01 X-67.90534 Y9.43692
G01 X-67.85980 Y9.58701
G01 X-67.84108 Y9.68122
G01 X-67.82569 Y9.83728
G01 X-67.82569 Y9.93334
G01 X-67.84108 Y10.08942
G01 X-67.85980 Y10.18363
G01 X-67.90534 Y10.33370
G01 X-67.94210 Y10.42244
G01 X-68.01601 Y10.56075
G01 X-68.06935 Y10.64063
G01 X-68.16887 Y10.76186
G01 X-68.23679 Y10.82978
G01 X-68.35802 Y10.92927
G01 X-68.43790 Y10.98264
G01 X-68.57621 Y11.05655
G01 X-68.66495 Y11.09331
G01 X-68.81499 Y11.13885
G01 X-68.89777 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.50318 Y11.11109 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.50318 Y11.11109
G01 X-69.50092 Y11.14393
G01 X-69.50270 Y11.19940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.32881 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.32881 Y11.15533
G01 X-69.41164 Y11.13885
G01 X-69.50318 Y11.11109
G01 X-69.54936 Y11.05279
G01 X-69.61108 Y10.98282
G01 X-69.67725 Y10.91576
G01 X-69.72406 Y10.87357
G01 X-69.72843 Y10.86969
G01 X-69.78126 Y10.82282
G01 X-69.80887 Y10.79953
G01 X-69.89302 Y10.73230
G01 X-69.90249 Y10.72333
G01 X-69.95025 Y10.67360
G01 X-70.02121 Y10.59196
G01 X-70.05007 Y10.55264
G01 X-70.08801 Y10.49519
G01 X-70.12497 Y10.43281
G01 X-70.16183 Y10.35683
G01 X-70.18880 Y10.29356
G01 X-70.20163 Y10.25894
G01 X-70.23379 Y10.14332
G01 X-70.24900 Y10.07596
G01 X-70.24920 Y10.07487
G01 X-70.26327 Y9.91978
G01 X-70.26554 Y9.88531
G01 X-70.26327 Y9.85087
G01 X-70.24920 Y9.69577
G01 X-70.24900 Y9.69471
G01 X-70.23381 Y9.62735
G01 X-70.20163 Y9.51170
G01 X-70.18885 Y9.47708
G01 X-70.16183 Y9.41381
G01 X-70.12497 Y9.33784
G01 X-70.08801 Y9.27546
G01 X-70.05007 Y9.21803
G01 X-70.01255 Y9.16692
G01 X-69.96193 Y9.08747
G01 X-69.95974 Y9.08351
G01 X-69.95881 Y9.07734
G01 X-69.95058 Y9.02082
G01 X-69.94313 Y8.91871
G01 X-69.94313 Y8.17175
G01 X-69.94702 Y8.09791
G01 X-69.95136 Y8.05674
G01 X-69.97900 Y7.91978
G01 X-70.02434 Y7.88143
G01 X-70.07323 Y7.84312
G01 X-70.16675 Y7.78097
G01 X-70.18659 Y7.76997
G01 X-70.21499 Y7.75328
G01 X-70.21527 Y7.75311
G01 X-70.21649 Y7.75237
G01 X-70.24392 Y7.73167
G01 X-70.39624 Y7.61076
G01 X-70.45558 Y7.55699
G01 X-70.50430 Y7.50828
G01 X-70.55807 Y7.44894
G01 X-70.63434 Y7.35285
G01 X-70.68182 Y7.29893
G01 X-70.70308 Y7.27711
G01 X-70.73109 Y7.24668
G01 X-70.74166 Y7.23454
G01 X-70.94753 Y7.06306
G01 X-70.95784 Y7.05669
G01 X-70.97557 Y7.04528
G01 X-70.97557 Y7.04526
G01 X-70.99294 Y7.00335
G01 X-70.99289 Y6.96985
G01 X-70.99289 Y4.92139
G01 X-70.99294 Y4.88783
G01 X-71.01029 Y4.84597
G01 X-71.02792 Y4.83460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.97582 Y4.84651 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.97582 Y4.84651
G01 X-70.99294 Y4.88783
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.99294 Y7.00335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.99294 Y7.00335
G01 X-71.01009 Y7.04478
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.95784 Y7.05669 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.95784 Y7.05669
G01 X-70.97557 Y7.04526
G01 X-70.97740 Y7.04409
G01 X-71.00770 Y7.04330
G01 X-71.00821 Y7.04363
G01 X-71.02883 Y7.05621
G01 X-71.23371 Y7.22387
G01 X-71.25428 Y7.24688
G01 X-71.27607 Y7.27025
G01 X-71.30404 Y7.29893
G01 X-71.35154 Y7.35288
G01 X-71.42779 Y7.44897
G01 X-71.48156 Y7.50830
G01 X-71.53025 Y7.55699
G01 X-71.58959 Y7.61076
G01 X-71.74194 Y7.73167
G01 X-71.76950 Y7.75247
G01 X-71.79926 Y7.76997
G01 X-71.81902 Y7.78094
G01 X-71.88202 Y7.82044
G01 X-71.91598 Y7.84427
G01 X-72.00709 Y7.91960
G01 X-72.02421 Y7.99966
G01 X-72.03388 Y8.06085
G01 X-72.04267 Y8.17175
G01 X-72.04267 Y8.64899
G01 X-72.04239 Y8.66921
G01 X-72.04206 Y8.68064
G01 X-72.02563 Y8.81348
G01 X-72.02210 Y8.82966
G01 X-72.00046 Y8.85775
G01 X-71.99398 Y8.86629
G01 X-71.95794 Y8.91444
G01 X-71.92545 Y8.95470
G01 X-71.90775 Y8.97507
G01 X-71.88844 Y8.99727
G01 X-71.85959 Y9.03659
G01 X-71.84900 Y9.05143
G01 X-71.82167 Y9.09400
G01 X-71.78466 Y9.15646
G01 X-71.74780 Y9.23235
G01 X-71.72078 Y9.29572
G01 X-71.70800 Y9.33029
G01 X-71.67582 Y9.44599
G01 X-71.66670 Y9.48267
G01 X-71.66063 Y9.51330
G01 X-71.66045 Y9.51439
G01 X-71.64638 Y9.66946
G01 X-71.64412 Y9.70393
G01 X-71.64638 Y9.73837
G01 X-71.66045 Y9.89349
G01 X-71.66063 Y9.89455
G01 X-71.67582 Y9.96186
G01 X-71.70798 Y10.07749
G01 X-71.71369 Y10.09290
G01 X-71.72078 Y10.11211
G01 X-71.74778 Y10.17545
G01 X-71.77932 Y10.24043
G01 X-71.78466 Y10.25137
G01 X-71.82164 Y10.31383
G01 X-71.85961 Y10.37129
G01 X-71.88839 Y10.41053
G01 X-71.93594 Y10.46522
G01 X-71.95944 Y10.49222
G01 X-72.00714 Y10.54195
G01 X-72.01664 Y10.55089
G01 X-72.10079 Y10.61818
G01 X-72.12840 Y10.64142
G01 X-72.17628 Y10.68391
G01 X-72.18125 Y10.68825
G01 X-72.21874 Y10.72092
G01 X-72.29865 Y10.80126
G01 X-72.36004 Y10.87205
G01 X-72.40249 Y10.92409
G01 X-72.40686 Y10.92978
G01 X-72.40871 Y10.98513
G01 X-72.40632 Y11.01835
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.40686 Y10.92978 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.40686 Y10.92978
G01 X-72.49802 Y10.95744
G01 X-72.58075 Y10.97393
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.01176 Y10.97393 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.01176 Y10.97393
G01 X-73.09464 Y10.95744
G01 X-73.24473 Y10.91193
G01 X-73.33347 Y10.87515
G01 X-73.47178 Y10.80123
G01 X-73.55164 Y10.74787
G01 X-73.67287 Y10.64838
G01 X-73.74079 Y10.58046
G01 X-73.84028 Y10.45922
G01 X-73.89365 Y10.37936
G01 X-73.96759 Y10.24104
G01 X-74.00434 Y10.15229
G01 X-74.04986 Y10.00223
G01 X-74.06860 Y9.90802
G01 X-74.08397 Y9.75193
G01 X-74.08397 Y9.65590
G01 X-74.06860 Y9.49981
G01 X-74.04986 Y9.40560
G01 X-74.00434 Y9.25552
G01 X-73.96759 Y9.16679
G01 X-73.89365 Y9.02847
G01 X-73.84028 Y8.94861
G01 X-73.74079 Y8.82737
G01 X-73.67287 Y8.75945
G01 X-73.58293 Y8.68564
G01 X-73.58293 Y7.98204
G01 X-73.75171 Y7.89182
G01 X-73.83159 Y7.83845
G01 X-74.04373 Y7.66433
G01 X-74.11165 Y7.59641
G01 X-74.28577 Y7.38427
G01 X-74.33914 Y7.30439
G01 X-74.46850 Y7.06235
G01 X-74.49293 Y7.00335
G01 X-74.49293 Y4.88781
G01 X-74.51026 Y4.84597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.47581 Y4.84653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.47581 Y4.84653
G01 X-74.49293 Y4.88781
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.49293 Y7.00335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.49293 Y7.00335
G01 X-74.51737 Y7.06235
G01 X-74.64673 Y7.30439
G01 X-74.70010 Y7.38427
G01 X-74.73794 Y7.43035
G01 X-74.87421 Y7.59641
G01 X-74.94213 Y7.66433
G01 X-75.15427 Y7.83845
G01 X-75.23416 Y7.89182
G01 X-75.40294 Y7.98204
G01 X-75.40294 Y8.90098
G01 X-75.32339 Y8.96626
G01 X-75.25547 Y9.03418
G01 X-75.15598 Y9.15541
G01 X-75.10261 Y9.23527
G01 X-75.02870 Y9.37358
G01 X-74.99194 Y9.46232
G01 X-74.94640 Y9.61241
G01 X-74.92768 Y9.70662
G01 X-74.91229 Y9.86268
G01 X-74.91229 Y9.95874
G01 X-74.92768 Y10.11482
G01 X-74.94640 Y10.20903
G01 X-74.99194 Y10.35910
G01 X-75.02870 Y10.44784
G01 X-75.10261 Y10.58615
G01 X-75.15598 Y10.66603
G01 X-75.25547 Y10.78726
G01 X-75.32339 Y10.85518
G01 X-75.44462 Y10.95467
G01 X-75.52450 Y11.00804
G01 X-75.66281 Y11.08195
G01 X-75.75155 Y11.11871
G01 X-75.90162 Y11.16425
G01 X-75.98440 Y11.18073
G01 X-76.41541 Y11.18071
G01 X-76.49824 Y11.16425
G01 X-76.64833 Y11.11871
G01 X-76.73707 Y11.08195
G01 X-76.87538 Y11.00804
G01 X-76.95524 Y10.95467
G01 X-77.07647 Y10.85518
G01 X-77.14439 Y10.78726
G01 X-77.24388 Y10.66603
G01 X-77.29725 Y10.58615
G01 X-77.37119 Y10.44784
G01 X-77.40794 Y10.35910
G01 X-77.45346 Y10.20903
G01 X-77.47220 Y10.11482
G01 X-77.48757 Y9.95874
G01 X-77.48757 Y9.86268
G01 X-77.47220 Y9.70662
G01 X-77.45346 Y9.61241
G01 X-77.40794 Y9.46232
G01 X-77.37119 Y9.37358
G01 X-77.29725 Y9.23527
G01 X-77.24388 Y9.15541
G01 X-77.14439 Y9.03418
G01 X-77.08292 Y8.97271
G01 X-77.08292 Y7.98204
G01 X-77.25173 Y7.89182
G01 X-77.33159 Y7.83845
G01 X-77.54373 Y7.66433
G01 X-77.61167 Y7.59641
G01 X-77.78576 Y7.38427
G01 X-77.83913 Y7.30439
G01 X-77.96852 Y7.06235
G01 X-77.99293 Y7.00335
G01 X-77.99293 Y4.88781
G01 X-77.97583 Y4.84653
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.02795 Y4.83460 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.02795 Y4.83460
G01 X-78.01027 Y4.84597
G01 X-77.99293 Y4.88781
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.99293 Y7.00335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.99293 Y7.00335
G01 X-78.01736 Y7.06235
G01 X-78.14675 Y7.30439
G01 X-78.20011 Y7.38427
G01 X-78.23794 Y7.43035
G01 X-78.37421 Y7.59641
G01 X-78.44213 Y7.66433
G01 X-78.65429 Y7.83845
G01 X-78.73415 Y7.89182
G01 X-78.90293 Y7.98201
G01 X-78.90293 Y8.74714
G01 X-78.82650 Y8.78800
G01 X-78.74662 Y8.84137
G01 X-78.62539 Y8.94086
G01 X-78.55747 Y9.00878
G01 X-78.45798 Y9.13001
G01 X-78.40461 Y9.20987
G01 X-78.33070 Y9.34818
G01 X-78.29394 Y9.43692
G01 X-78.24840 Y9.58701
G01 X-78.22968 Y9.68122
G01 X-78.21429 Y9.83728
G01 X-78.21429 Y9.93334
G01 X-78.22968 Y10.08942
G01 X-78.24840 Y10.18363
G01 X-78.29394 Y10.33370
G01 X-78.33070 Y10.42244
G01 X-78.40461 Y10.56075
G01 X-78.45798 Y10.64063
G01 X-78.55747 Y10.76186
G01 X-78.62539 Y10.82978
G01 X-78.74662 Y10.92927
G01 X-78.82650 Y10.98264
G01 X-78.96481 Y11.05655
G01 X-79.05355 Y11.09331
G01 X-79.20362 Y11.13885
G01 X-79.28640 Y11.15533
G01 X-79.71741 Y11.15533
G01 X-79.80024 Y11.17179
G01 X-79.95033 Y11.21731
G01 X-80.03907 Y11.25406
G01 X-80.17738 Y11.32800
G01 X-80.25724 Y11.38137
G01 X-80.37847 Y11.48086
G01 X-80.44639 Y11.54878
G01 X-80.54588 Y11.67001
G01 X-80.59925 Y11.74987
G01 X-80.67319 Y11.88818
G01 X-80.70994 Y11.97692
G01 X-80.75546 Y12.12701
G01 X-80.77420 Y12.22122
G01 X-80.78957 Y12.37728
G01 X-80.78957 Y12.47334
G01 X-80.78495 Y12.52041
G01 X-81.24987 Y12.98533
G01 X-81.82269 Y12.98533
G01 X-81.95363 Y13.06379
G01 X-82.03013 Y13.10481
G01 X-82.18697 Y13.17900
G01 X-82.24275 Y13.20217
G01 X-82.39957 Y13.25828
G01 X-82.44087 Y13.27085
G01 X-82.59769 Y13.31012
G01 X-82.62947 Y13.31647
G01 X-82.78629 Y13.33973
G01 X-82.81260 Y13.34233
G01 X-82.96945 Y13.35002
G01 X-82.99401 Y13.35002
G01 X-83.15083 Y13.34233
G01 X-83.17714 Y13.33973
G01 X-83.28362 Y13.32394
G01 X-83.30778 Y13.32609
G01 X-83.37641 Y13.32947
G01 X-83.39071 Y13.32983
G01 X-88.74495 Y13.32983
G01 X-88.75925 Y13.32947
G01 X-88.82786 Y13.32609
G01 X-88.85737 Y13.32320
G01 X-88.92598 Y13.31301
G01 X-88.95844 Y13.30654
G01 X-89.02702 Y13.28937
G01 X-89.06463 Y13.27794
G01 X-89.13324 Y13.25337
G01 X-89.15541 Y13.24481
G01 X-89.78185 Y12.98533
G01 X-89.92287 Y12.84431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.18015 Y13.07222 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.18015 Y13.07222
G01 X-90.00342 Y12.98533
G01 X-89.78185 Y12.98533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.61696 Y11.67890 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.61696 Y11.67890
G01 X-87.61836 Y11.68045
G01 X-87.61836 Y11.71540
G01 X-87.60764 Y11.81728
G01 X-87.57599 Y11.91472
G01 X-87.53083 Y11.99292
G01 X-87.52014 Y12.00006
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.82269 Y12.98533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.82269 Y12.98533
G01 X-81.81050 Y12.96244
G01 X-81.77374 Y12.87370
G01 X-81.72820 Y12.72363
G01 X-81.70948 Y12.62942
G01 X-81.69409 Y12.47334
G01 X-81.69409 Y12.37728
G01 X-81.70948 Y12.22122
G01 X-81.72820 Y12.12701
G01 X-81.77374 Y11.97692
G01 X-81.81050 Y11.88818
G01 X-81.88441 Y11.74987
G01 X-81.93778 Y11.67001
G01 X-82.03727 Y11.54878
G01 X-82.10519 Y11.48086
G01 X-82.22642 Y11.38137
G01 X-82.30630 Y11.32800
G01 X-82.44461 Y11.25406
G01 X-82.53335 Y11.21731
G01 X-82.68342 Y11.17179
G01 X-82.76620 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.19721 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.19721 Y11.15533
G01 X-83.28004 Y11.13885
G01 X-83.37158 Y11.11109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.37112 Y11.19940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.37112 Y11.19940
G01 X-83.28004 Y11.17179
G01 X-83.19721 Y11.15533
G01 X-82.76620 Y11.15533
G01 X-82.68342 Y11.13885
G01 X-82.53335 Y11.09331
G01 X-82.44461 Y11.05655
G01 X-82.30630 Y10.98264
G01 X-82.22642 Y10.92927
G01 X-82.10519 Y10.82978
G01 X-82.03727 Y10.76186
G01 X-81.93778 Y10.64063
G01 X-81.88441 Y10.56075
G01 X-81.81050 Y10.42244
G01 X-81.77374 Y10.33370
G01 X-81.72820 Y10.18363
G01 X-81.70948 Y10.08942
G01 X-81.69409 Y9.93334
G01 X-81.69409 Y9.83728
G01 X-81.70948 Y9.68122
G01 X-81.72820 Y9.58701
G01 X-81.77374 Y9.43692
G01 X-81.81050 Y9.34818
G01 X-81.88441 Y9.20987
G01 X-81.93778 Y9.13001
G01 X-82.03727 Y9.00878
G01 X-82.10519 Y8.94086
G01 X-82.14174 Y8.91086
G01 X-82.14174 Y7.82814
G01 X-81.94214 Y7.66433
G01 X-81.87422 Y7.59641
G01 X-81.73793 Y7.43035
G01 X-81.70011 Y7.38427
G01 X-81.64674 Y7.30439
G01 X-81.51735 Y7.06235
G01 X-81.49295 Y7.00337
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.49295 Y4.88783 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.49295 Y4.88783
G01 X-81.47583 Y4.84651
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.52795 Y4.83460 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.52795 Y4.83460
G01 X-81.51029 Y4.84597
G01 X-81.49295 Y4.88783
G01 X-81.49292 Y4.92139
G01 X-81.49292 Y6.96985
G01 X-81.49295 Y7.00337
G01 X-81.46851 Y7.06235
G01 X-81.33915 Y7.30439
G01 X-81.28576 Y7.38427
G01 X-81.11167 Y7.59641
G01 X-81.04375 Y7.66433
G01 X-80.83158 Y7.83845
G01 X-80.75172 Y7.89182
G01 X-80.58291 Y7.98204
G01 X-80.58291 Y9.18544
G01 X-80.59925 Y9.20987
G01 X-80.67319 Y9.34818
G01 X-80.70994 Y9.43692
G01 X-80.75546 Y9.58701
G01 X-80.77420 Y9.68122
G01 X-80.78957 Y9.83728
G01 X-80.78957 Y9.93334
G01 X-80.77420 Y10.08942
G01 X-80.75546 Y10.18363
G01 X-80.70994 Y10.33370
G01 X-80.67319 Y10.42244
G01 X-80.59925 Y10.56075
G01 X-80.54588 Y10.64063
G01 X-80.44639 Y10.76186
G01 X-80.37847 Y10.82978
G01 X-80.25724 Y10.92927
G01 X-80.17738 Y10.98264
G01 X-80.03907 Y11.05655
G01 X-79.95033 Y11.09331
G01 X-79.80024 Y11.13885
G01 X-79.71741 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.28640 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.28640 Y11.15533
G01 X-79.20362 Y11.17179
G01 X-79.05355 Y11.21731
G01 X-78.96481 Y11.25406
G01 X-78.82650 Y11.32800
G01 X-78.74662 Y11.38137
G01 X-78.62539 Y11.48086
G01 X-78.55747 Y11.54878
G01 X-78.45798 Y11.67001
G01 X-78.40461 Y11.74987
G01 X-78.33070 Y11.88818
G01 X-78.29394 Y11.97692
G01 X-78.24840 Y12.12701
G01 X-78.22968 Y12.22122
G01 X-78.21429 Y12.37728
G01 X-78.21429 Y12.47334
G01 X-78.22968 Y12.62942
G01 X-78.24840 Y12.72363
G01 X-78.29394 Y12.87370
G01 X-78.33070 Y12.96244
G01 X-78.40461 Y13.10075
G01 X-78.45798 Y13.18063
G01 X-78.55747 Y13.30186
G01 X-78.62539 Y13.36978
G01 X-78.74662 Y13.46927
G01 X-78.82650 Y13.52264
G01 X-78.96481 Y13.59655
G01 X-79.05355 Y13.63331
G01 X-79.20362 Y13.67885
G01 X-79.29783 Y13.69757
G01 X-79.45391 Y13.71296
G01 X-79.54997 Y13.71296
G01 X-79.59699 Y13.70831
G01 X-79.82396 Y13.93534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.54378 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.54378 Y16.56531
G01 X-79.72386 Y16.56531
G01 X-79.88457 Y16.44481
G01 X-80.18015 Y16.37089
G01 X-81.78012 Y16.37089
G01 X-82.07572 Y16.44481
G01 X-82.23640 Y16.56531
G01 X-82.26208 Y16.58458
G01 X-82.27013 Y16.66647
G01 X-82.27013 Y17.15647
G01 X-82.26833 Y17.16871
G01 X-82.25896 Y17.26348
G01 X-82.25126 Y17.42032
G01 X-82.25126 Y17.51265
G01 X-82.25896 Y17.66947
G01 X-82.26833 Y17.76421
G01 X-82.27011 Y17.77635
G01 X-82.27013 Y18.26647
G01 X-82.26071 Y18.36205
G01 X-82.23285 Y18.45397
G01 X-82.18756 Y18.53868
G01 X-82.12662 Y18.61295
G01 X-82.05235 Y18.67389
G01 X-81.96765 Y18.71918
G01 X-81.87572 Y18.74704
G01 X-81.78014 Y18.75646
G01 X-80.18015 Y18.75646
G01 X-80.08454 Y18.74704
G01 X-79.99262 Y18.71918
G01 X-79.90791 Y18.67389
G01 X-79.83366 Y18.61295
G01 X-79.77270 Y18.53868
G01 X-79.72744 Y18.45397
G01 X-79.69955 Y18.36205
G01 X-79.69013 Y18.26647
G01 X-79.69013 Y16.66647
G01 X-79.69821 Y16.58456
G01 X-79.72386 Y16.56531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.23640 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.23640 Y16.56531
G01 X-82.60026 Y16.56533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.43995 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.43995 Y16.56531
G01 X-85.51801 Y16.56531
G01 X-85.67137 Y16.45029
G01 X-85.97135 Y16.37529
G01 X-87.57134 Y16.37529
G01 X-87.86989 Y16.44958
G01 X-88.02491 Y16.56531
G01 X-88.05255 Y16.58593
G01 X-88.06133 Y16.67526
G01 X-88.06133 Y17.16525
G01 X-88.05953 Y17.17750
G01 X-88.05016 Y17.27226
G01 X-88.04246 Y17.42911
G01 X-88.04246 Y17.52144
G01 X-88.05016 Y17.67828
G01 X-88.05953 Y17.77305
G01 X-88.06131 Y17.78514
G01 X-88.06133 Y18.27526
G01 X-88.05191 Y18.37086
G01 X-88.02405 Y18.46279
G01 X-87.97876 Y18.54750
G01 X-87.91782 Y18.62174
G01 X-87.84355 Y18.68268
G01 X-87.75885 Y18.72796
G01 X-87.66692 Y18.75585
G01 X-87.57134 Y18.76525
G01 X-85.97135 Y18.76525
G01 X-85.87574 Y18.75585
G01 X-85.78382 Y18.72796
G01 X-85.69911 Y18.68268
G01 X-85.62486 Y18.62174
G01 X-85.56390 Y18.54750
G01 X-85.51864 Y18.46279
G01 X-85.49075 Y18.37086
G01 X-85.48133 Y18.27526
G01 X-85.48133 Y16.67526
G01 X-85.49012 Y16.58624
G01 X-85.51801 Y16.56531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.02491 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.02491 Y16.56531
G01 X-88.40027 Y16.56533
G01 X-88.44711 Y16.54588
G01 X-88.60390 Y16.48977
G01 X-88.68280 Y16.46576
G01 X-88.83964 Y16.42647
G01 X-88.90718 Y16.41301
G01 X-89.06397 Y16.38974
G01 X-89.12504 Y16.38372
G01 X-89.28188 Y16.37603
G01 X-89.34081 Y16.37603
G01 X-89.49760 Y16.38372
G01 X-89.55864 Y16.38974
G01 X-89.71548 Y16.41301
G01 X-89.78305 Y16.42647
G01 X-89.93987 Y16.46576
G01 X-90.01868 Y16.48974
G01 X-90.17550 Y16.54585
G01 X-90.22234 Y16.56531
G01 X-90.25579 Y16.59873
G01 X-90.35528 Y16.71994
G01 X-90.40865 Y16.79982
G01 X-90.48259 Y16.93813
G01 X-90.51934 Y17.02687
G01 X-90.56486 Y17.17696
G01 X-90.58361 Y17.27117
G01 X-90.59897 Y17.42723
G01 X-90.59897 Y17.52329
G01 X-90.58361 Y17.67938
G01 X-90.56486 Y17.77358
G01 X-90.51934 Y17.92365
G01 X-90.48259 Y18.01239
G01 X-90.40865 Y18.15070
G01 X-90.35528 Y18.23058
G01 X-90.25579 Y18.35179
G01 X-90.18787 Y18.41973
G01 X-90.15633 Y18.44562
G01 X-90.15633 Y22.34889
G01 X-90.17190 Y22.36443
G01 X-90.20299 Y22.40233
G01 X-90.25635 Y22.48219
G01 X-90.27944 Y22.52542
G01 X-90.31622 Y22.61416
G01 X-90.33044 Y22.66105
G01 X-90.34916 Y22.75526
G01 X-90.35399 Y22.80403
G01 X-90.35633 Y22.85206
G01 X-90.35633 Y23.45206
G01 X-90.35399 Y23.50009
G01 X-90.34916 Y23.54886
G01 X-90.33044 Y23.64307
G01 X-90.31622 Y23.68998
G01 X-90.27944 Y23.77873
G01 X-90.26522 Y23.80535
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.36743 Y23.80535 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.36743 Y23.80535
G01 X-88.35323 Y23.77873
G01 X-88.31648 Y23.68998
G01 X-88.30223 Y23.64307
G01 X-88.28351 Y23.54886
G01 X-88.27871 Y23.50009
G01 X-88.27635 Y23.45206
G01 X-88.27635 Y22.85206
G01 X-88.27871 Y22.80403
G01 X-88.28351 Y22.75526
G01 X-88.30223 Y22.66105
G01 X-88.31648 Y22.61416
G01 X-88.35323 Y22.52542
G01 X-88.37632 Y22.48219
G01 X-88.42969 Y22.40233
G01 X-88.46077 Y22.36443
G01 X-88.47634 Y22.34889
G01 X-88.47634 Y18.45382
G01 X-88.46555 Y18.44496
G01 X-88.43479 Y18.41973
G01 X-88.36687 Y18.35179
G01 X-88.26738 Y18.23058
G01 X-88.21401 Y18.15070
G01 X-88.14010 Y18.01239
G01 X-88.10332 Y17.92365
G01 X-88.06131 Y17.78514
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.06133 Y17.16525 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.06133 Y17.16525
G01 X-88.10332 Y17.02687
G01 X-88.14010 Y16.93813
G01 X-88.21401 Y16.79982
G01 X-88.26738 Y16.71994
G01 X-88.36687 Y16.59873
G01 X-88.40027 Y16.56533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.22234 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.22234 Y16.56531
G01 X-91.28233 Y16.56531
G01 X-91.43936 Y16.44755
G01 X-91.73715 Y16.37310
G01 X-93.33712 Y16.37310
G01 X-93.63491 Y16.44755
G01 X-93.79193 Y16.56531
G01 X-93.81873 Y16.58540
G01 X-93.82713 Y16.67087
G01 X-93.82713 Y17.16086
G01 X-93.82533 Y17.17310
G01 X-93.81596 Y17.26787
G01 X-93.80826 Y17.42472
G01 X-93.80826 Y17.51704
G01 X-93.81596 Y17.67386
G01 X-93.82533 Y17.76861
G01 X-93.82711 Y17.78075
G01 X-93.82713 Y18.27087
G01 X-93.81771 Y18.36645
G01 X-93.78985 Y18.45837
G01 X-93.74456 Y18.54310
G01 X-93.68362 Y18.61735
G01 X-93.60935 Y18.67828
G01 X-93.52465 Y18.72357
G01 X-93.43272 Y18.75146
G01 X-93.33714 Y18.76086
G01 X-91.73715 Y18.76086
G01 X-91.64154 Y18.75146
G01 X-91.54962 Y18.72357
G01 X-91.46491 Y18.67828
G01 X-91.39066 Y18.61735
G01 X-91.32970 Y18.54310
G01 X-91.28444 Y18.45837
G01 X-91.25655 Y18.36645
G01 X-91.24713 Y18.27087
G01 X-91.24713 Y16.67087
G01 X-91.25556 Y16.58540
G01 X-91.28233 Y16.56531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.75017 Y13.98327 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.75017 Y13.98327
G01 X-93.66244 Y13.93534
G01 X-93.40384 Y13.93534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.58162 Y13.75764 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.58162 Y13.75764
G01 X-93.40384 Y13.93534
G01 X-92.71941 Y14.21883
G01 X-92.69955 Y14.22650
G01 X-92.63095 Y14.25106
G01 X-92.59775 Y14.26115
G01 X-92.52914 Y14.27834
G01 X-92.50090 Y14.28398
G01 X-92.43229 Y14.29414
G01 X-92.40684 Y14.29665
G01 X-92.33824 Y14.30003
G01 X-92.32594 Y14.30034
G01 X-80.90194 Y14.30034
G01 X-80.88964 Y14.30003
G01 X-80.82101 Y14.29665
G01 X-80.79554 Y14.29414
G01 X-80.72693 Y14.28398
G01 X-80.69869 Y14.27834
G01 X-80.63008 Y14.26115
G01 X-80.59688 Y14.25106
G01 X-80.52828 Y14.22650
G01 X-80.50842 Y14.21883
G01 X-79.82396 Y13.93534
G01 X-78.87248 Y13.93534
G01 X-77.48295 Y12.54581
G01 X-77.48757 Y12.49874
G01 X-77.48757 Y12.40268
G01 X-77.47220 Y12.24662
G01 X-77.45346 Y12.15241
G01 X-77.40794 Y12.00232
G01 X-77.37119 Y11.91358
G01 X-77.29725 Y11.77527
G01 X-77.24388 Y11.69541
G01 X-77.14439 Y11.57418
G01 X-77.07647 Y11.50626
G01 X-76.95524 Y11.40677
G01 X-76.87538 Y11.35340
G01 X-76.73707 Y11.27946
G01 X-76.64833 Y11.24271
G01 X-76.49824 Y11.19719
G01 X-76.41541 Y11.18071
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.98440 Y11.18073 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.98440 Y11.18073
G01 X-75.90162 Y11.19719
G01 X-75.75155 Y11.24271
G01 X-75.66281 Y11.27946
G01 X-75.52450 Y11.35340
G01 X-75.44462 Y11.40677
G01 X-75.32339 Y11.50626
G01 X-75.25547 Y11.57418
G01 X-75.15598 Y11.69541
G01 X-75.10261 Y11.77527
G01 X-75.02870 Y11.91358
G01 X-74.99194 Y12.00232
G01 X-74.94640 Y12.15241
G01 X-74.92768 Y12.24662
G01 X-74.91229 Y12.40268
G01 X-74.91229 Y12.49874
G01 X-74.92768 Y12.65482
G01 X-74.94640 Y12.74903
G01 X-74.99194 Y12.89910
G01 X-75.02870 Y12.98784
G01 X-75.10261 Y13.12615
G01 X-75.15598 Y13.20603
G01 X-75.25547 Y13.32726
G01 X-75.32339 Y13.39518
G01 X-75.44462 Y13.49467
G01 X-75.52450 Y13.54804
G01 X-75.66281 Y13.62195
G01 X-75.75155 Y13.65871
G01 X-75.90162 Y13.70425
G01 X-75.99583 Y13.72297
G01 X-76.12885 Y13.73608
G01 X-76.15191 Y13.73836
G01 X-76.24797 Y13.73836
G01 X-76.29499 Y13.73371
G01 X-77.44655 Y14.88532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.60777 Y16.24331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.60777 Y16.24331
G01 X-75.35636 Y16.24331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.39674 Y15.96442 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.39674 Y15.96442
G01 X-75.43014 Y16.07826
G01 X-75.40236 Y16.16381
G01 X-75.35636 Y16.24331
G01 X-75.34640 Y16.24913
G01 X-75.28524 Y16.28029
G01 X-75.03281 Y16.36457
G01 X-74.97162 Y16.37427
G01 X-74.86060 Y16.38306
G01 X-74.35593 Y16.38306
G01 X-74.31521 Y16.38425
G01 X-74.29776 Y16.38629
G01 X-74.21165 Y16.41275
G01 X-74.13911 Y16.45662
G01 X-74.07919 Y16.51651
G01 X-74.03731 Y16.58537
G01 X-74.03538 Y16.58900
G01 X-74.00889 Y16.67516
G01 X-74.00685 Y16.69261
G01 X-74.00569 Y16.73330
G01 X-74.00569 Y18.33332
G01 X-74.00685 Y18.37404
G01 X-74.00889 Y18.39149
G01 X-74.03535 Y18.47760
G01 X-74.07922 Y18.55014
G01 X-74.13911 Y18.61003
G01 X-74.21165 Y18.65390
G01 X-74.29776 Y18.68036
G01 X-74.31521 Y18.68240
G01 X-74.35593 Y18.68356
G01 X-75.95595 Y18.68356
G01 X-75.99664 Y18.68240
G01 X-76.01409 Y18.68036
G01 X-76.10019 Y18.65390
G01 X-76.17274 Y18.61003
G01 X-76.23263 Y18.55016
G01 X-76.25910 Y18.50879
G01 X-76.29832 Y18.44249
G01 X-76.31950 Y18.40414
G01 X-76.35600 Y18.33332
G01 X-76.44594 Y18.19144
G01 X-76.44594 Y17.84323
G01 X-76.44414 Y17.83106
G01 X-76.43479 Y17.73640
G01 X-76.42707 Y17.57955
G01 X-76.42707 Y17.48707
G01 X-76.43479 Y17.33025
G01 X-76.44414 Y17.23559
G01 X-76.44594 Y17.22337
G01 X-76.44594 Y16.73330
G01 X-76.43652 Y16.63772
G01 X-76.42023 Y16.58403
G01 X-76.39384 Y16.56531
G01 X-76.27774 Y16.48301
G01 X-76.23939 Y16.46426
G01 X-76.17327 Y16.43551
G01 X-76.10594 Y16.40983
G01 X-76.04071 Y16.38850
G01 X-75.97220 Y16.36970
G01 X-75.95595 Y16.36543
G01 X-75.90370 Y16.35235
G01 X-75.82669 Y16.32891
G01 X-75.75806 Y16.30437
G01 X-75.71523 Y16.28781
G01 X-75.60777 Y16.24331
G01 X-75.42494 Y16.06046
G01 X-75.39674 Y15.96442
G01 X-75.37142 Y15.90325
G01 X-75.26222 Y15.71481
G01 X-75.23342 Y15.67826
G01 X-75.17825 Y15.61616
G01 X-73.08786 Y13.52576
G01 X-73.00320 Y13.45353
G01 X-72.95306 Y13.41710
G01 X-72.93518 Y13.40450
G01 X-72.83094 Y13.39539
G01 X-72.81328 Y13.39511
G01 X-72.79776 Y13.39470
G01 X-72.77020 Y13.39368
G01 X-72.76192 Y13.39333
G01 X-72.70132 Y13.39036
G01 X-72.60587 Y13.37771
G01 X-72.53810 Y13.36531
G01 X-72.51379 Y13.35962
G01 X-72.38826 Y13.31906
G01 X-72.33360 Y13.29884
G01 X-72.32405 Y13.29379
G01 X-72.18593 Y13.21949
G01 X-72.16617 Y13.20844
G01 X-72.12898 Y13.18071
G01 X-72.01661 Y13.09089
G01 X-72.00714 Y13.08195
G01 X-71.95944 Y13.03222
G01 X-71.88844 Y12.95056
G01 X-71.85961 Y12.91129
G01 X-71.82164 Y12.85383
G01 X-71.78466 Y12.79140
G01 X-71.74778 Y12.71545
G01 X-71.72078 Y12.65211
G01 X-71.70800 Y12.61756
G01 X-71.67582 Y12.50186
G01 X-71.66063 Y12.43455
G01 X-71.66045 Y12.43349
G01 X-71.64638 Y12.27837
G01 X-71.64412 Y12.24393
G01 X-71.64638 Y12.20946
G01 X-71.66045 Y12.05437
G01 X-71.66063 Y12.05330
G01 X-71.67582 Y11.98599
G01 X-71.70800 Y11.87029
G01 X-71.72078 Y11.83572
G01 X-71.74780 Y11.77235
G01 X-71.78466 Y11.69646
G01 X-71.82167 Y11.63400
G01 X-71.85959 Y11.57662
G01 X-71.88844 Y11.53730
G01 X-71.95941 Y11.45564
G01 X-72.00714 Y11.40591
G01 X-72.01666 Y11.39691
G01 X-72.03650 Y11.38104
G01 X-72.10076 Y11.32971
G01 X-72.12840 Y11.30641
G01 X-72.18128 Y11.25950
G01 X-72.18542 Y11.25582
G01 X-72.23223 Y11.21365
G01 X-72.29863 Y11.14642
G01 X-72.36025 Y11.07649
G01 X-72.40632 Y11.01835
G01 X-72.40650 Y11.01815
G01 X-72.49802 Y10.99039
G01 X-72.58075 Y10.97393
G01 X-72.74999 Y10.97393
G01 X-72.84262 Y10.97390
G01 X-73.01176 Y10.97393
G01 X-73.09464 Y10.99039
G01 X-73.24473 Y11.03590
G01 X-73.33347 Y11.07266
G01 X-73.47178 Y11.14660
G01 X-73.55164 Y11.19996
G01 X-73.67287 Y11.29945
G01 X-73.74079 Y11.36737
G01 X-73.84028 Y11.48861
G01 X-73.89365 Y11.56847
G01 X-73.96759 Y11.70679
G01 X-74.00434 Y11.79552
G01 X-74.04986 Y11.94560
G01 X-74.06860 Y12.03981
G01 X-74.08397 Y12.19590
G01 X-74.08397 Y12.29193
G01 X-74.07935 Y12.33900
G01 X-74.47160 Y12.73123
G01 X-76.62567 Y14.88532
G01 X-77.44655 Y14.88532
G01 X-78.13103 Y15.16884
G01 X-78.15089 Y15.17651
G01 X-78.21949 Y15.20107
G01 X-78.25269 Y15.21116
G01 X-78.32130 Y15.22833
G01 X-78.34954 Y15.23396
G01 X-78.41817 Y15.24415
G01 X-78.44362 Y15.24667
G01 X-78.51226 Y15.25004
G01 X-78.52455 Y15.25032
G01 X-95.94793 Y15.25032
G01 X-95.96020 Y15.25004
G01 X-96.02883 Y15.24667
G01 X-96.05426 Y15.24415
G01 X-96.12289 Y15.23396
G01 X-96.15113 Y15.22833
G01 X-96.21974 Y15.21116
G01 X-96.25294 Y15.20107
G01 X-96.32154 Y15.17651
G01 X-96.34140 Y15.16884
G01 X-96.71593 Y15.01372
G01 X-96.75299 Y14.99942
G01 X-96.82444 Y14.97387
G01 X-96.91641 Y14.94608
G01 X-96.93048 Y14.94258
G01 X-96.93724 Y14.92177
G01 X-97.05624 Y14.68345
G01 X-97.09266 Y14.63331
G01 X-97.16490 Y14.54865
G01 X-97.90254 Y13.81103
G01 X-98.62527 Y13.08827
G01 X-98.64899 Y13.06338
G01 X-98.67208 Y13.03791
G01 X-98.69253 Y13.01035
G01 X-98.73081 Y12.95307
G01 X-98.74844 Y12.92363
G01 X-98.76312 Y12.89257
G01 X-98.78946 Y12.82897
G01 X-98.80101 Y12.79663
G01 X-98.80937 Y12.76331
G01 X-98.82281 Y12.69584
G01 X-98.82784 Y12.66183
G01 X-98.82954 Y12.62754
G01 X-98.83038 Y12.59310
G01 X-98.83038 Y9.99214
G01 X-98.82954 Y9.95767
G01 X-98.82784 Y9.92341
G01 X-98.82281 Y9.88940
G01 X-98.81249 Y9.83492
G01 X-98.80950 Y9.82196
G01 X-98.80632 Y9.80743
G01 X-98.80597 Y9.80108
G01 X-98.80503 Y9.78168
G01 X-98.80419 Y9.74718
G01 X-98.80419 Y8.79430
G01 X-98.80299 Y8.75361
G01 X-98.80096 Y8.73616
G01 X-98.77450 Y8.65006
G01 X-98.73063 Y8.57751
G01 X-98.67074 Y8.51762
G01 X-98.59819 Y8.47376
G01 X-98.51209 Y8.44729
G01 X-98.49461 Y8.44526
G01 X-98.45395 Y8.44406
G01 X-96.05390 Y8.44406
G01 X-96.01321 Y8.44526
G01 X-95.99576 Y8.44729
G01 X-95.90966 Y8.47376
G01 X-95.83711 Y8.51762
G01 X-95.77719 Y8.57751
G01 X-95.73338 Y8.65001
G01 X-95.70689 Y8.73616
G01 X-95.70485 Y8.75361
G01 X-95.70366 Y8.79430
G01 X-95.70366 Y11.19432
G01 X-95.70485 Y11.23504
G01 X-95.70689 Y11.25249
G01 X-95.73335 Y11.33860
G01 X-95.77722 Y11.41114
G01 X-95.83711 Y11.47103
G01 X-95.90966 Y11.51490
G01 X-95.99576 Y11.54136
G01 X-96.01321 Y11.54340
G01 X-96.05390 Y11.54456
G01 X-96.98065 Y11.54456
G01 X-97.03584 Y11.54675
G01 X-97.06680 Y11.54919
G01 X-97.24039 Y11.58424
G01 X-97.30157 Y11.60413
G01 X-97.35217 Y11.62229
G01 X-97.41140 Y11.82175
G01 X-97.42108 Y11.88294
G01 X-97.42987 Y11.99381
G01 X-97.42987 Y12.11698
G01 X-97.42934 Y12.14451
G01 X-97.42873 Y12.16006
G01 X-97.41044 Y12.29503
G01 X-97.40698 Y12.29983
G01 X-97.37056 Y12.34995
G01 X-97.29830 Y12.43466
G01 X-95.78946 Y13.94349
G01 X-95.76957 Y13.96262
G01 X-95.75817 Y13.97316
G01 X-95.64981 Y14.05566
G01 X-95.64402 Y14.05660
G01 X-95.58283 Y14.06630
G01 X-95.47181 Y14.07509
G01 X-94.15109 Y14.07509
G01 X-94.06815 Y14.07019
G01 X-94.02193 Y14.06470
G01 X-93.81136 Y14.00862
G01 X-93.75017 Y13.98327
G01 X-93.64621 Y13.92645
G01 X-93.60539 Y13.84634
G01 X-93.58162 Y13.75764
G01 X-93.58454 Y13.74657
G01 X-93.60575 Y13.68126
G01 X-93.72480 Y13.44288
G01 X-93.76120 Y13.39277
G01 X-93.83341 Y13.30816
G01 X-94.30727 Y12.83427
G01 X-94.33099 Y12.80938
G01 X-94.35408 Y12.78391
G01 X-94.37453 Y12.75635
G01 X-94.41281 Y12.69907
G01 X-94.43044 Y12.66963
G01 X-94.44512 Y12.63857
G01 X-94.47146 Y12.57497
G01 X-94.48304 Y12.54263
G01 X-94.49137 Y12.50931
G01 X-94.50481 Y12.44184
G01 X-94.50984 Y12.40786
G01 X-94.51154 Y12.37354
G01 X-94.51238 Y12.33910
G01 X-94.51238 Y11.58393
G01 X-94.51893 Y11.48813
G01 X-94.52480 Y11.44525
G01 X-94.52998 Y11.43603
G01 X-94.57664 Y11.35135
G01 X-94.58347 Y11.33865
G01 X-94.60996 Y11.25249
G01 X-94.61199 Y11.23504
G01 X-94.61319 Y11.19432
G01 X-94.61319 Y8.79430
G01 X-94.61199 Y8.75361
G01 X-94.60996 Y8.73616
G01 X-94.58350 Y8.65006
G01 X-94.53963 Y8.57751
G01 X-94.47974 Y8.51762
G01 X-94.40719 Y8.47376
G01 X-94.32109 Y8.44729
G01 X-94.30361 Y8.44526
G01 X-94.26295 Y8.44406
G01 X-91.86290 Y8.44406
G01 X-91.82221 Y8.44526
G01 X-91.80476 Y8.44729
G01 X-91.71865 Y8.47376
G01 X-91.64611 Y8.51762
G01 X-91.58619 Y8.57751
G01 X-91.54238 Y8.65001
G01 X-91.51589 Y8.73616
G01 X-91.51385 Y8.75361
G01 X-91.51266 Y8.79430
G01 X-91.51266 Y11.19432
G01 X-91.51385 Y11.23504
G01 X-91.51589 Y11.25249
G01 X-91.54235 Y11.33860
G01 X-91.58622 Y11.41114
G01 X-91.64611 Y11.47103
G01 X-91.71865 Y11.51490
G01 X-91.80476 Y11.54136
G01 X-91.82221 Y11.54340
G01 X-91.86290 Y11.54456
G01 X-92.53181 Y11.54456
G01 X-92.61477 Y11.54949
G01 X-92.66097 Y11.55495
G01 X-92.87136 Y11.61099
G01 X-92.93252 Y11.63633
G01 X-92.99277 Y11.66369
G01 X-93.03844 Y11.88259
G01 X-93.04326 Y11.94380
G01 X-93.04575 Y12.02168
G01 X-92.95815 Y12.17667
G01 X-92.92173 Y12.22678
G01 X-92.84946 Y12.31149
G01 X-92.16745 Y12.99348
G01 X-92.14789 Y13.01230
G01 X-92.13646 Y13.02287
G01 X-92.02782 Y13.10565
G01 X-92.02185 Y13.10661
G01 X-91.96067 Y13.11629
G01 X-91.84980 Y13.12508
G01 X-90.48193 Y13.12508
G01 X-90.43382 Y13.12343
G01 X-90.40669 Y13.12157
G01 X-90.24134 Y13.09079
G01 X-90.18015 Y13.07222
G01 X-89.97675 Y12.97220
G01 X-89.94441 Y12.90656
G01 X-89.92326 Y12.84916
G01 X-89.92237 Y12.84573
G01 X-89.92287 Y12.84431
G01 X-90.01063 Y12.60164
G01 X-90.02331 Y12.57822
G01 X-90.02862 Y12.56821
G01 X-90.05231 Y12.52285
G01 X-90.06125 Y12.50623
G01 X-90.09514 Y12.44525
G01 X-90.10672 Y12.42516
G01 X-90.11244 Y12.41563
G01 X-90.12714 Y12.38457
G01 X-90.15005 Y12.33029
G01 X-90.15346 Y12.32097
G01 X-90.16501 Y12.28866
G01 X-90.17337 Y12.25531
G01 X-90.18681 Y12.18784
G01 X-90.19184 Y12.15383
G01 X-90.19354 Y12.11954
G01 X-90.19438 Y12.08513
G01 X-90.19438 Y11.75330
G01 X-90.19491 Y11.72577
G01 X-90.19552 Y11.71022
G01 X-90.21520 Y11.56938
G01 X-90.22199 Y11.54114
G01 X-90.24675 Y11.51680
G01 X-90.32592 Y11.43560
G01 X-90.34868 Y11.41109
G01 X-90.39250 Y11.33860
G01 X-90.41896 Y11.25249
G01 X-90.42099 Y11.23504
G01 X-90.42219 Y11.19432
G01 X-90.42219 Y8.79430
G01 X-90.42099 Y8.75361
G01 X-90.41896 Y8.73616
G01 X-90.39250 Y8.65006
G01 X-90.34863 Y8.57751
G01 X-90.28874 Y8.51762
G01 X-90.21619 Y8.47376
G01 X-90.13009 Y8.44729
G01 X-90.11261 Y8.44526
G01 X-90.07195 Y8.44406
G01 X-87.67190 Y8.44406
G01 X-87.63121 Y8.44526
G01 X-87.61376 Y8.44729
G01 X-87.52765 Y8.47376
G01 X-87.45511 Y8.51762
G01 X-87.39519 Y8.57751
G01 X-87.35138 Y8.65001
G01 X-87.32489 Y8.73616
G01 X-87.32285 Y8.75361
G01 X-87.32169 Y8.79430
G01 X-87.32169 Y11.19432
G01 X-87.32285 Y11.23504
G01 X-87.32489 Y11.25249
G01 X-87.35135 Y11.33860
G01 X-87.38928 Y11.40240
G01 X-87.42029 Y11.44525
G01 X-87.42291 Y11.44858
G01 X-87.44980 Y11.48244
G01 X-87.46466 Y11.50057
G01 X-87.59469 Y11.65422
G01 X-87.61694 Y11.67890
G01 X-87.67193 Y11.68432
G01 X-88.65414 Y11.68432
G01 X-88.65414 Y11.73717
G01 X-88.39700 Y11.99432
G01 X-87.52877 Y11.99432
G01 X-87.52014 Y12.00006
G01 X-87.45895 Y12.03123
G01 X-87.20627 Y12.11561
G01 X-87.14508 Y12.12528
G01 X-87.03421 Y12.13407
G01 X-84.40353 Y12.13407
G01 X-84.31029 Y12.12788
G01 X-84.25852 Y12.12099
G01 X-84.12380 Y12.09033
G01 X-84.07689 Y12.01667
G01 X-84.07422 Y12.01195
G01 X-84.04458 Y11.96349
G01 X-84.03604 Y11.95071
G01 X-83.99418 Y11.87918
G01 X-83.95641 Y11.81546
G01 X-83.91847 Y11.75800
G01 X-83.88961 Y11.71868
G01 X-83.81865 Y11.63705
G01 X-83.77092 Y11.58731
G01 X-83.76142 Y11.57835
G01 X-83.67729 Y11.51111
G01 X-83.64966 Y11.48782
G01 X-83.60170 Y11.44528
G01 X-83.59678 Y11.44096
G01 X-83.55921 Y11.40824
G01 X-83.47935 Y11.32795
G01 X-83.41804 Y11.25726
G01 X-83.37536 Y11.20494
G01 X-83.37112 Y11.19940
G01 X-83.36934 Y11.14393
G01 X-83.37158 Y11.11109
G01 X-83.41778 Y11.05279
G01 X-83.47948 Y10.98282
G01 X-83.54565 Y10.91576
G01 X-83.59246 Y10.87357
G01 X-83.59683 Y10.86969
G01 X-83.64966 Y10.82282
G01 X-83.67729 Y10.79953
G01 X-83.76142 Y10.73230
G01 X-83.77092 Y10.72333
G01 X-83.81865 Y10.67360
G01 X-83.88961 Y10.59196
G01 X-83.91847 Y10.55264
G01 X-83.95641 Y10.49519
G01 X-83.99337 Y10.43281
G01 X-84.03025 Y10.35683
G01 X-84.05725 Y10.29356
G01 X-84.07003 Y10.25894
G01 X-84.10221 Y10.14332
G01 X-84.11743 Y10.07596
G01 X-84.11760 Y10.07487
G01 X-84.13168 Y9.91978
G01 X-84.13394 Y9.88533
G01 X-84.13168 Y9.85087
G01 X-84.11760 Y9.69577
G01 X-84.11743 Y9.69468
G01 X-84.10221 Y9.62735
G01 X-84.07003 Y9.51170
G01 X-84.05725 Y9.47708
G01 X-84.03025 Y9.41381
G01 X-83.99337 Y9.33784
G01 X-83.95641 Y9.27546
G01 X-83.91847 Y9.21800
G01 X-83.88961 Y9.17868
G01 X-83.81865 Y9.09705
G01 X-83.80539 Y9.08221
G01 X-83.80094 Y9.07746
G01 X-83.78616 Y9.06171
G01 X-83.77823 Y9.05343
G01 X-83.77153 Y9.04652
G01 X-83.70427 Y8.96641
G01 X-83.70046 Y8.94459
G01 X-83.69076 Y8.88341
G01 X-83.68197 Y8.77236
G01 X-83.68197 Y8.30843
G01 X-83.68865 Y8.21160
G01 X-83.69609 Y8.15786
G01 X-83.72873 Y8.01907
G01 X-83.80396 Y7.97223
G01 X-83.85880 Y7.94223
G01 X-83.88209 Y7.93002
G01 X-83.94430 Y7.89885
G01 X-83.95870 Y7.89184
G01 X-84.01654 Y7.86449
G01 X-84.18659 Y7.76997
G01 X-84.21633 Y7.75247
G01 X-84.24389 Y7.73167
G01 X-84.31483 Y7.67538
G01 X-84.39627 Y7.61076
G01 X-84.45560 Y7.55699
G01 X-84.50429 Y7.50830
G01 X-84.55806 Y7.44897
G01 X-84.67897 Y7.29659
G01 X-84.68280 Y7.29174
G01 X-84.68717 Y7.28605
G01 X-84.69977 Y7.26903
G01 X-84.71727 Y7.23929
G01 X-84.81176 Y7.06929
G01 X-84.84600 Y6.99690
G01 X-84.87234 Y6.93327
G01 X-84.89931 Y6.85788
G01 X-84.95270 Y6.67086
G01 X-84.96137 Y6.63744
G01 X-84.96617 Y6.60322
G01 X-84.98839 Y6.41003
G01 X-84.99233 Y6.33002
G01 X-84.99317 Y6.29560
G01 X-84.99317 Y5.59560
G01 X-84.99233 Y5.56121
G01 X-84.98839 Y5.48120
G01 X-84.96617 Y5.28801
G01 X-84.96139 Y5.25382
G01 X-84.95270 Y5.22037
G01 X-84.89931 Y5.03335
G01 X-84.87234 Y4.95796
G01 X-84.84600 Y4.89436
G01 X-84.81176 Y4.82197
G01 X-84.71727 Y4.65197
G01 X-84.69977 Y4.62220
G01 X-84.67897 Y4.59462
G01 X-84.55806 Y4.44227
G01 X-84.50429 Y4.38296
G01 X-84.45560 Y4.33427
G01 X-84.39627 Y4.28049
G01 X-84.24392 Y4.15959
G01 X-84.21636 Y4.13879
G01 X-84.18656 Y4.12126
G01 X-84.01659 Y4.02680
G01 X-83.94417 Y3.99256
G01 X-83.88060 Y3.96622
G01 X-83.80518 Y3.93922
G01 X-83.61819 Y3.88583
G01 X-83.58474 Y3.87717
G01 X-83.55052 Y3.87237
G01 X-83.35733 Y3.85014
G01 X-83.27732 Y3.84621
G01 X-83.20851 Y3.84621
G01 X-83.12853 Y3.85014
G01 X-82.93531 Y3.87237
G01 X-82.90110 Y3.87717
G01 X-82.86764 Y3.88583
G01 X-82.68067 Y3.93922
G01 X-82.60983 Y3.96459
G01 X-82.60524 Y3.96622
G01 X-82.54169 Y3.99256
G01 X-82.46927 Y4.02680
G01 X-82.29929 Y4.12126
G01 X-82.26947 Y4.13879
G01 X-82.24189 Y4.15959
G01 X-82.08957 Y4.28049
G01 X-82.03023 Y4.33429
G01 X-81.98159 Y4.38293
G01 X-81.92779 Y4.44227
G01 X-81.85154 Y4.53833
G01 X-81.80407 Y4.59228
G01 X-81.78278 Y4.61415
G01 X-81.75472 Y4.64460
G01 X-81.74420 Y4.65669
G01 X-81.53831 Y4.82819
G01 X-81.52795 Y4.83460
G01 X-81.50844 Y4.84717
G01 X-81.47816 Y4.84796
G01 X-81.47583 Y4.84651
G01 X-81.45700 Y4.83503
G01 X-81.25215 Y4.66739
G01 X-81.23153 Y4.64435
G01 X-81.20979 Y4.62103
G01 X-81.18177 Y4.59228
G01 X-81.13435 Y4.53838
G01 X-81.05805 Y4.44229
G01 X-81.00425 Y4.38293
G01 X-80.95561 Y4.33429
G01 X-80.89627 Y4.28049
G01 X-80.74395 Y4.15959
G01 X-80.71637 Y4.13879
G01 X-80.68657 Y4.12126
G01 X-80.51657 Y4.02680
G01 X-80.44418 Y3.99256
G01 X-80.38060 Y3.96622
G01 X-80.30516 Y3.93922
G01 X-80.11820 Y3.88583
G01 X-80.08474 Y3.87717
G01 X-80.05053 Y3.87237
G01 X-79.85731 Y3.85014
G01 X-79.77733 Y3.84621
G01 X-79.70852 Y3.84621
G01 X-79.62853 Y3.85014
G01 X-79.43532 Y3.87237
G01 X-79.40110 Y3.87717
G01 X-79.36765 Y3.88583
G01 X-79.18068 Y3.93922
G01 X-79.10984 Y3.96457
G01 X-79.10524 Y3.96622
G01 X-79.04167 Y3.99256
G01 X-78.96928 Y4.02680
G01 X-78.79928 Y4.12126
G01 X-78.76948 Y4.13879
G01 X-78.74190 Y4.15959
G01 X-78.58957 Y4.28049
G01 X-78.53024 Y4.33429
G01 X-78.48160 Y4.38293
G01 X-78.42780 Y4.44227
G01 X-78.35155 Y4.53833
G01 X-78.30408 Y4.59228
G01 X-78.28272 Y4.61420
G01 X-78.25472 Y4.64460
G01 X-78.24411 Y4.65680
G01 X-78.03829 Y4.82822
G01 X-78.02795 Y4.83460
G01 X-78.00845 Y4.84714
G01 X-77.97814 Y4.84796
G01 X-77.97583 Y4.84653
G01 X-77.95704 Y4.83505
G01 X-77.75213 Y4.66739
G01 X-77.73156 Y4.64437
G01 X-77.70977 Y4.62101
G01 X-77.68178 Y4.59228
G01 X-77.63430 Y4.53833
G01 X-77.55805 Y4.44227
G01 X-77.50426 Y4.38293
G01 X-77.45562 Y4.33429
G01 X-77.39628 Y4.28049
G01 X-77.24396 Y4.15959
G01 X-77.21637 Y4.13879
G01 X-77.18658 Y4.12126
G01 X-77.01658 Y4.02680
G01 X-76.94419 Y3.99256
G01 X-76.88061 Y3.96622
G01 X-76.80517 Y3.93922
G01 X-76.61820 Y3.88583
G01 X-76.58475 Y3.87717
G01 X-76.55054 Y3.87237
G01 X-76.35732 Y3.85014
G01 X-76.27733 Y3.84621
G01 X-76.20853 Y3.84621
G01 X-76.12854 Y3.85014
G01 X-75.93532 Y3.87237
G01 X-75.90111 Y3.87717
G01 X-75.86766 Y3.88583
G01 X-75.68069 Y3.93922
G01 X-75.60982 Y3.96459
G01 X-75.60525 Y3.96622
G01 X-75.54167 Y3.99256
G01 X-75.46923 Y4.02680
G01 X-75.29928 Y4.12126
G01 X-75.26949 Y4.13879
G01 X-75.24193 Y4.15959
G01 X-75.08958 Y4.28049
G01 X-75.03025 Y4.33427
G01 X-74.98155 Y4.38296
G01 X-74.92778 Y4.44229
G01 X-74.85151 Y4.53838
G01 X-74.80406 Y4.59230
G01 X-74.78277 Y4.61415
G01 X-74.75476 Y4.64458
G01 X-74.74419 Y4.65672
G01 X-74.53830 Y4.82819
G01 X-74.52799 Y4.83457
G01 X-74.51028 Y4.84595
G01 X-74.51026 Y4.84597
G01 X-74.50843 Y4.84717
G01 X-74.47815 Y4.84796
G01 X-74.47762 Y4.84763
G01 X-74.47581 Y4.84653
G01 X-74.45704 Y4.83505
G01 X-74.25214 Y4.66739
G01 X-74.23157 Y4.64437
G01 X-74.20977 Y4.62101
G01 X-74.18178 Y4.59228
G01 X-74.13431 Y4.53833
G01 X-74.05806 Y4.44227
G01 X-74.00426 Y4.38293
G01 X-73.95560 Y4.33427
G01 X-73.89626 Y4.28049
G01 X-73.74391 Y4.15959
G01 X-73.71635 Y4.13879
G01 X-73.68656 Y4.12126
G01 X-73.51658 Y4.02680
G01 X-73.44417 Y3.99256
G01 X-73.38062 Y3.96622
G01 X-73.30520 Y3.93925
G01 X-73.11821 Y3.88583
G01 X-73.08473 Y3.87714
G01 X-73.05054 Y3.87237
G01 X-72.85733 Y3.85014
G01 X-72.77734 Y3.84621
G01 X-72.70853 Y3.84621
G01 X-72.62852 Y3.85014
G01 X-72.43531 Y3.87237
G01 X-72.40112 Y3.87714
G01 X-72.36764 Y3.88583
G01 X-72.18067 Y3.93922
G01 X-72.10983 Y3.96459
G01 X-72.10523 Y3.96622
G01 X-72.04168 Y3.99256
G01 X-71.96927 Y4.02680
G01 X-71.79929 Y4.12126
G01 X-71.76950 Y4.13879
G01 X-71.74194 Y4.15959
G01 X-71.58959 Y4.28049
G01 X-71.53025 Y4.33427
G01 X-71.48159 Y4.38293
G01 X-71.42779 Y4.44227
G01 X-71.35154 Y4.53833
G01 X-71.30407 Y4.59228
G01 X-71.28270 Y4.61420
G01 X-71.25471 Y4.64460
G01 X-71.24410 Y4.65680
G01 X-71.03828 Y4.82822
G01 X-71.02792 Y4.83460
G01 X-71.00843 Y4.84717
G01 X-70.97816 Y4.84796
G01 X-70.97760 Y4.84760
G01 X-70.97582 Y4.84651
G01 X-70.95700 Y4.83503
G01 X-70.75207 Y4.66731
G01 X-70.73152 Y4.64435
G01 X-70.70971 Y4.62096
G01 X-70.68179 Y4.59230
G01 X-70.63434 Y4.53838
G01 X-70.55807 Y4.44229
G01 X-70.50430 Y4.38296
G01 X-70.45558 Y4.33427
G01 X-70.39627 Y4.28049
G01 X-70.24392 Y4.15959
G01 X-70.21636 Y4.13879
G01 X-70.18654 Y4.12126
G01 X-70.01656 Y4.02680
G01 X-69.94417 Y3.99256
G01 X-69.88060 Y3.96622
G01 X-69.80516 Y3.93922
G01 X-69.61819 Y3.88583
G01 X-69.58474 Y3.87717
G01 X-69.55053 Y3.87237
G01 X-69.35728 Y3.85014
G01 X-69.27732 Y3.84621
G01 X-69.20849 Y3.84621
G01 X-69.12853 Y3.85014
G01 X-68.93531 Y3.87237
G01 X-68.90107 Y3.87717
G01 X-68.86765 Y3.88583
G01 X-68.68068 Y3.93922
G01 X-68.60981 Y3.96459
G01 X-68.60524 Y3.96622
G01 X-68.54166 Y3.99256
G01 X-68.46925 Y4.02680
G01 X-68.29927 Y4.12126
G01 X-68.26948 Y4.13879
G01 X-68.24187 Y4.15959
G01 X-68.08957 Y4.28049
G01 X-68.03023 Y4.33429
G01 X-67.98159 Y4.38293
G01 X-67.92777 Y4.44227
G01 X-67.85154 Y4.53833
G01 X-67.80407 Y4.59228
G01 X-67.78279 Y4.61415
G01 X-67.75472 Y4.64460
G01 X-67.74420 Y4.65669
G01 X-67.53831 Y4.82819
G01 X-67.52795 Y4.83460
G01 X-67.51025 Y4.84597
G01 X-67.51022 Y4.84600
G01 X-67.50844 Y4.84717
G01 X-67.47814 Y4.84796
G01 X-67.47763 Y4.84763
G01 X-67.47583 Y4.84653
G01 X-67.45701 Y4.83505
G01 X-67.25218 Y4.66746
G01 X-67.23153 Y4.64435
G01 X-67.20981 Y4.62108
G01 X-67.18177 Y4.59228
G01 X-67.13430 Y4.53833
G01 X-67.05802 Y4.44227
G01 X-67.00425 Y4.38293
G01 X-66.95561 Y4.33429
G01 X-66.89628 Y4.28049
G01 X-66.74393 Y4.15959
G01 X-66.71634 Y4.13879
G01 X-66.68657 Y4.12126
G01 X-66.51655 Y4.02680
G01 X-66.44418 Y3.99256
G01 X-66.38061 Y3.96622
G01 X-66.30517 Y3.93922
G01 X-66.11820 Y3.88583
G01 X-66.08475 Y3.87717
G01 X-66.05053 Y3.87237
G01 X-65.85731 Y3.85014
G01 X-65.77733 Y3.84621
G01 X-65.70852 Y3.84621
G01 X-65.62854 Y3.85014
G01 X-65.43532 Y3.87237
G01 X-65.40111 Y3.87717
G01 X-65.36765 Y3.88583
G01 X-65.18068 Y3.93922
G01 X-65.10984 Y3.96457
G01 X-65.10525 Y3.96622
G01 X-65.04167 Y3.99256
G01 X-64.96925 Y4.02680
G01 X-64.79928 Y4.12126
G01 X-64.76948 Y4.13879
G01 X-64.74190 Y4.15959
G01 X-64.58958 Y4.28049
G01 X-64.53024 Y4.33429
G01 X-64.48160 Y4.38293
G01 X-64.42780 Y4.44229
G01 X-64.35150 Y4.53838
G01 X-64.30408 Y4.59228
G01 X-64.28277 Y4.61415
G01 X-64.25475 Y4.64458
G01 X-64.24419 Y4.65672
G01 X-64.03829 Y4.82819
G01 X-64.02798 Y4.83457
G01 X-64.01028 Y4.84595
G01 X-64.01025 Y4.84597
G01 X-64.00842 Y4.84717
G01 X-63.97815 Y4.84796
G01 X-63.97584 Y4.84653
G01 X-63.95704 Y4.83505
G01 X-63.75214 Y4.66739
G01 X-63.73156 Y4.64437
G01 X-63.70977 Y4.62101
G01 X-63.68178 Y4.59228
G01 X-63.63431 Y4.53833
G01 X-63.55806 Y4.44227
G01 X-63.50426 Y4.38293
G01 X-63.45562 Y4.33429
G01 X-63.39628 Y4.28049
G01 X-63.24396 Y4.15959
G01 X-63.21638 Y4.13879
G01 X-63.18656 Y4.12126
G01 X-63.01658 Y4.02680
G01 X-62.94416 Y3.99253
G01 X-62.88061 Y3.96622
G01 X-62.80517 Y3.93922
G01 X-62.61821 Y3.88583
G01 X-62.58475 Y3.87717
G01 X-62.55054 Y3.87237
G01 X-62.35732 Y3.85014
G01 X-62.27734 Y3.84621
G01 X-62.20853 Y3.84621
G01 X-62.12852 Y3.85014
G01 X-61.93533 Y3.87237
G01 X-61.90111 Y3.87717
G01 X-61.86766 Y3.88583
G01 X-61.68069 Y3.93922
G01 X-61.60983 Y3.96459
G01 X-61.60525 Y3.96622
G01 X-61.54168 Y3.99256
G01 X-61.46924 Y4.02680
G01 X-61.29928 Y4.12126
G01 X-61.26949 Y4.13879
G01 X-61.24193 Y4.15959
G01 X-61.08958 Y4.28049
G01 X-61.03025 Y4.33427
G01 X-60.98156 Y4.38296
G01 X-60.92778 Y4.44227
G01 X-60.85153 Y4.53836
G01 X-60.80406 Y4.59230
G01 X-60.78278 Y4.61415
G01 X-60.75476 Y4.64458
G01 X-60.74419 Y4.65672
G01 X-60.53830 Y4.82819
G01 X-60.52799 Y4.83457
G01 X-60.51028 Y4.84595
G01 X-60.51026 Y4.84597
G01 X-60.50843 Y4.84717
G01 X-60.47815 Y4.84796
G01 X-60.47762 Y4.84763
G01 X-60.47582 Y4.84653
G01 X-60.45700 Y4.83503
G01 X-60.25214 Y4.66739
G01 X-60.23152 Y4.64435
G01 X-60.20978 Y4.62103
G01 X-60.18179 Y4.59230
G01 X-60.13431 Y4.53836
G01 X-60.05806 Y4.44227
G01 X-60.00429 Y4.38296
G01 X-59.95560 Y4.33427
G01 X-59.89626 Y4.28049
G01 X-59.74392 Y4.15959
G01 X-59.71636 Y4.13879
G01 X-59.68656 Y4.12126
G01 X-59.51659 Y4.02680
G01 X-59.44417 Y3.99256
G01 X-59.38059 Y3.96622
G01 X-59.30518 Y3.93922
G01 X-59.11819 Y3.88583
G01 X-59.08473 Y3.87717
G01 X-59.05052 Y3.87237
G01 X-58.85733 Y3.85014
G01 X-58.77732 Y3.84621
G01 X-58.70851 Y3.84621
G01 X-58.62853 Y3.85014
G01 X-58.43531 Y3.87237
G01 X-58.40109 Y3.87717
G01 X-58.36764 Y3.88583
G01 X-58.18067 Y3.93922
G01 X-58.10983 Y3.96459
G01 X-58.10523 Y3.96622
G01 X-58.04168 Y3.99256
G01 X-57.96927 Y4.02680
G01 X-57.79929 Y4.12126
G01 X-57.76950 Y4.13879
G01 X-57.74189 Y4.15959
G01 X-57.58959 Y4.28049
G01 X-57.53023 Y4.33429
G01 X-57.48159 Y4.38293
G01 X-57.42779 Y4.44227
G01 X-57.30689 Y4.59459
G01 X-57.28606 Y4.62220
G01 X-57.26856 Y4.65199
G01 X-57.26622 Y4.65619
G01 X-57.17410 Y4.82197
G01 X-57.13983 Y4.89439
G01 X-57.11352 Y4.95794
G01 X-57.08654 Y5.03335
G01 X-57.05850 Y5.13155
G01 X-57.03313 Y5.22035
G01 X-57.02446 Y5.25380
G01 X-57.01966 Y5.28801
G01 X-57.00257 Y5.43668
G01 X-56.99746 Y5.48118
G01 X-56.99353 Y5.56121
G01 X-56.99266 Y5.59560
G01 X-56.99266 Y6.29560
G01 X-56.99353 Y6.33002
G01 X-56.99746 Y6.41006
G01 X-57.01966 Y6.60322
G01 X-57.02446 Y6.63744
G01 X-57.03313 Y6.67089
G01 X-57.05065 Y6.73228
G01 X-57.08654 Y6.85788
G01 X-57.11352 Y6.93330
G01 X-57.13986 Y6.99687
G01 X-57.17410 Y7.06929
G01 X-57.26856 Y7.23926
G01 X-57.28608 Y7.26906
G01 X-57.30689 Y7.29662
G01 X-57.42779 Y7.44897
G01 X-57.48156 Y7.50830
G01 X-57.53025 Y7.55699
G01 X-57.58959 Y7.61076
G01 X-57.74191 Y7.73167
G01 X-57.76950 Y7.75247
G01 X-57.79927 Y7.76997
G01 X-57.81903 Y7.78094
G01 X-57.88202 Y7.82044
G01 X-57.91598 Y7.84427
G01 X-58.00706 Y7.91960
G01 X-58.02421 Y7.99966
G01 X-58.03389 Y8.06085
G01 X-58.04267 Y8.17175
G01 X-58.04267 Y8.66550
G01 X-58.04092 Y8.71483
G01 X-58.03897 Y8.74256
G01 X-58.01319 Y8.88988
G01 X-57.99886 Y8.90312
G01 X-57.97956 Y8.92049
G01 X-57.95278 Y8.94584
G01 X-57.92774 Y8.97073
G01 X-57.87072 Y9.02163
G01 X-57.82558 Y9.05773
G01 X-57.82530 Y9.05795
G01 X-57.81794 Y9.06382
G01 X-57.80854 Y9.07269
G01 X-57.76081 Y9.12245
G01 X-57.68984 Y9.20408
G01 X-57.66099 Y9.24340
G01 X-57.62307 Y9.30080
G01 X-57.58606 Y9.36324
G01 X-57.54920 Y9.43916
G01 X-57.52218 Y9.50253
G01 X-57.50940 Y9.53710
G01 X-57.47722 Y9.65280
G01 X-57.46203 Y9.72008
G01 X-57.46185 Y9.72112
G01 X-57.44778 Y9.87627
G01 X-57.44552 Y9.91071
G01 X-57.44778 Y9.94518
G01 X-57.46185 Y10.10029
G01 X-57.46203 Y10.10136
G01 X-57.47722 Y10.16867
G01 X-57.50938 Y10.28427
G01 X-57.52218 Y10.31891
G01 X-57.54920 Y10.38229
G01 X-57.58601 Y10.45810
G01 X-57.62304 Y10.52064
G01 X-57.63305 Y10.53700
G01 X-57.66099 Y10.57804
G01 X-57.68984 Y10.61736
G01 X-57.76081 Y10.69900
G01 X-57.80854 Y10.74876
G01 X-57.81801 Y10.75770
G01 X-57.90214 Y10.82493
G01 X-57.92980 Y10.84822
G01 X-57.97775 Y10.89074
G01 X-57.98265 Y10.89506
G01 X-58.02022 Y10.92780
G01 X-58.10005 Y11.00807
G01 X-58.16144 Y11.07886
G01 X-58.20389 Y11.13090
G01 X-58.20826 Y11.13659
G01 X-58.21011 Y11.19191
G01 X-58.20772 Y11.22513
G01 X-58.16160 Y11.28335
G01 X-58.10003 Y11.35320
G01 X-58.03373 Y11.42036
G01 X-57.98687 Y11.46255
G01 X-57.98268 Y11.46631
G01 X-57.92980 Y11.51322
G01 X-57.90224 Y11.53644
G01 X-57.81804 Y11.60375
G01 X-57.81443 Y11.60715
G01 X-57.80851 Y11.61266
G01 X-57.78847 Y11.63120
G01 X-57.77422 Y11.64472
G01 X-57.75825 Y11.66034
G01 X-57.67859 Y11.72767
G01 X-57.65408 Y11.73199
G01 X-57.59289 Y11.74169
G01 X-57.48187 Y11.75048
G01 X-54.93034 Y11.75048
G01 X-54.86719 Y11.74764
G01 X-54.83181 Y11.74444
G01 X-54.64814 Y11.70403
G01 X-54.58698 Y11.68261
G01 X-54.43816 Y11.61568
G01 X-54.46295 Y11.46184
G01 X-54.46834 Y11.42264
G01 X-54.47870 Y11.29917
G01 X-54.48116 Y11.24032
G01 X-54.48116 Y8.84030
G01 X-54.47999 Y8.79961
G01 X-54.47796 Y8.78216
G01 X-54.45150 Y8.69606
G01 X-54.40763 Y8.62351
G01 X-54.34774 Y8.56362
G01 X-54.27519 Y8.51975
G01 X-54.18909 Y8.49329
G01 X-54.17161 Y8.49126
G01 X-54.13095 Y8.49006
G01 X-51.73093 Y8.49006
G01 X-51.69021 Y8.49126
G01 X-51.67276 Y8.49329
G01 X-51.58665 Y8.51975
G01 X-51.51411 Y8.56362
G01 X-51.45422 Y8.62351
G01 X-51.41035 Y8.69606
G01 X-51.38389 Y8.78216
G01 X-51.38185 Y8.79961
G01 X-51.38066 Y8.84030
G01 X-51.38066 Y11.24032
G01 X-51.38185 Y11.28104
G01 X-51.38389 Y11.29849
G01 X-51.41035 Y11.38460
G01 X-51.45422 Y11.45714
G01 X-51.51411 Y11.51703
G01 X-51.58665 Y11.56090
G01 X-51.67276 Y11.58736
G01 X-51.69021 Y11.58940
G01 X-51.73093 Y11.59059
G01 X-51.95102 Y11.59059
G01 X-52.01310 Y11.59333
G01 X-52.04789 Y11.59641
G01 X-52.21698 Y11.63164
G01 X-52.22491 Y11.64304
G01 X-52.24995 Y11.67974
G01 X-52.26123 Y11.69582
G01 X-52.29272 Y11.73953
G01 X-52.32562 Y11.78955
G01 X-52.33027 Y11.79727
G01 X-52.36852 Y11.85455
G01 X-52.38896 Y11.88210
G01 X-52.41205 Y11.90758
G01 X-52.43578 Y11.93247
G01 X-52.88645 Y12.38317
G01 X-52.94154 Y12.44520
G01 X-52.97037 Y12.48172
G01 X-53.07959 Y12.67022
G01 X-53.10494 Y12.73140
G01 X-53.13834 Y12.84527
G01 X-53.11058 Y12.93072
G01 X-53.06458 Y13.01032
G01 X-53.05472 Y13.01606
G01 X-52.99354 Y13.04723
G01 X-52.74086 Y13.13161
G01 X-52.67967 Y13.14128
G01 X-52.56877 Y13.15007
G01 X-50.86707 Y13.15007
G01 X-50.83954 Y13.14954
G01 X-50.82399 Y13.14893
G01 X-50.68902 Y13.13064
G01 X-50.68422 Y13.12719
G01 X-50.63410 Y13.09076
G01 X-50.54940 Y13.01850
G01 X-49.77406 Y12.24317
G01 X-49.76761 Y12.23664
G01 X-49.76426 Y12.23321
G01 X-49.68828 Y12.14070
G01 X-49.65295 Y12.08952
G01 X-49.53647 Y11.84096
G01 X-49.52242 Y11.79389
G01 X-49.52613 Y11.77629
G01 X-49.55278 Y11.69153
G01 X-49.74162 Y11.58546
G01 X-49.75841 Y11.57898
G01 X-49.75973 Y11.57840
G01 X-49.86128 Y11.53372
G01 X-49.86611 Y11.53156
G01 X-49.97650 Y11.46925
G01 X-50.03644 Y11.40933
G01 X-50.07403 Y11.34843
G01 X-50.08031 Y11.33677
G01 X-50.10675 Y11.25066
G01 X-50.10881 Y11.23319
G01 X-50.10998 Y11.19252
G01 X-50.10998 Y8.79253
G01 X-50.10881 Y8.75189
G01 X-50.10675 Y8.73438
G01 X-50.08028 Y8.64825
G01 X-50.03644 Y8.57574
G01 X-49.97652 Y8.51582
G01 X-49.90398 Y8.47195
G01 X-49.81790 Y8.44551
G01 X-49.80043 Y8.44348
G01 X-49.75973 Y8.44228
G01 X-47.35974 Y8.44228
G01 X-47.31902 Y8.44348
G01 X-47.30155 Y8.44551
G01 X-47.21547 Y8.47195
G01 X-47.17226 Y8.49661
G01 X-47.14292 Y8.51582
G01 X-47.08298 Y8.57576
G01 X-47.07561 Y8.58666
G01 X-47.03917 Y8.64823
G01 X-47.01270 Y8.73438
G01 X-47.01064 Y8.75186
G01 X-47.00947 Y8.79253
G01 X-47.00947 Y11.19252
G01 X-47.01064 Y11.23319
G01 X-47.01270 Y11.25066
G01 X-47.03917 Y11.33682
G01 X-47.08301 Y11.40931
G01 X-47.14292 Y11.46925
G01 X-47.21544 Y11.51309
G01 X-47.30155 Y11.53956
G01 X-47.31902 Y11.54159
G01 X-47.35974 Y11.54276
G01 X-47.41021 Y11.54276
G01 X-47.46540 Y11.54495
G01 X-47.49639 Y11.54738
G01 X-47.67010 Y11.58246
G01 X-47.73127 Y11.60235
G01 X-47.78176 Y11.62048
G01 X-47.84097 Y11.81980
G01 X-47.85067 Y11.88099
G01 X-47.85946 Y11.99201
G01 X-47.85946 Y12.01911
G01 X-47.86032 Y12.05355
G01 X-47.86200 Y12.08787
G01 X-47.86705 Y12.12186
G01 X-47.88046 Y12.18932
G01 X-47.88882 Y12.22264
G01 X-47.90038 Y12.25498
G01 X-47.92672 Y12.31855
G01 X-47.94140 Y12.34962
G01 X-47.95905 Y12.37906
G01 X-47.99733 Y12.43633
G01 X-48.01778 Y12.46389
G01 X-48.04087 Y12.48937
G01 X-48.06456 Y12.51429
G01 X-48.88846 Y13.33816
G01 X-48.94373 Y13.40039
G01 X-48.97254 Y13.43697
G01 X-49.08161 Y13.62523
G01 X-49.10693 Y13.68639
G01 X-49.13510 Y13.78243
G01 X-49.14033 Y13.80024
G01 X-49.11257 Y13.88571
G01 X-49.06654 Y13.96534
G01 X-49.05674 Y13.97105
G01 X-48.99552 Y14.00224
G01 X-48.74300 Y14.08660
G01 X-48.68181 Y14.09630
G01 X-48.57079 Y14.10509
G01 X-46.48806 Y14.10509
G01 X-46.46055 Y14.10455
G01 X-46.44501 Y14.10394
G01 X-46.31001 Y14.08566
G01 X-46.25504 Y14.04573
G01 X-46.17038 Y13.97349
G01 X-45.14156 Y12.94466
G01 X-45.12243 Y12.92477
G01 X-45.11189 Y12.91337
G01 X-45.02939 Y12.80504
G01 X-45.02845 Y12.79922
G01 X-45.01875 Y12.73803
G01 X-45.00996 Y12.62699
G01 X-45.00996 Y11.99201
G01 X-45.01214 Y11.93682
G01 X-45.01458 Y11.90583
G01 X-45.04961 Y11.73227
G01 X-45.06950 Y11.67108
G01 X-45.08766 Y11.62048
G01 X-45.28700 Y11.56128
G01 X-45.34819 Y11.55157
G01 X-45.45924 Y11.54276
G01 X-45.50973 Y11.54276
G01 X-45.55042 Y11.54159
G01 X-45.56792 Y11.53956
G01 X-45.65395 Y11.51312
G01 X-45.66767 Y11.50573
G01 X-45.72654 Y11.46923
G01 X-45.78641 Y11.40936
G01 X-45.82403 Y11.34843
G01 X-45.83030 Y11.33677
G01 X-45.85675 Y11.25066
G01 X-45.85880 Y11.23319
G01 X-45.85997 Y11.19252
G01 X-45.85997 Y8.79253
G01 X-45.85880 Y8.75189
G01 X-45.85675 Y8.73438
G01 X-45.83028 Y8.64825
G01 X-45.78644 Y8.57574
G01 X-45.72652 Y8.51582
G01 X-45.65398 Y8.47198
G01 X-45.56790 Y8.44551
G01 X-45.55042 Y8.44348
G01 X-45.50973 Y8.44228
G01 X-43.10971 Y8.44228
G01 X-43.06902 Y8.44348
G01 X-43.05154 Y8.44551
G01 X-42.96546 Y8.47195
G01 X-42.92226 Y8.49661
G01 X-42.89292 Y8.51582
G01 X-42.83298 Y8.57576
G01 X-42.82561 Y8.58666
G01 X-42.78916 Y8.64823
G01 X-42.76269 Y8.73438
G01 X-42.76064 Y8.75186
G01 X-42.75947 Y8.79253
G01 X-42.75947 Y11.19252
G01 X-42.76064 Y11.23319
G01 X-42.76269 Y11.25066
G01 X-42.78916 Y11.33682
G01 X-42.83300 Y11.40931
G01 X-42.89292 Y11.46925
G01 X-42.96544 Y11.51309
G01 X-43.05154 Y11.53956
G01 X-43.06902 Y11.54159
G01 X-43.10971 Y11.54276
G01 X-43.16023 Y11.54276
G01 X-43.21540 Y11.54495
G01 X-43.24639 Y11.54738
G01 X-43.42000 Y11.58244
G01 X-43.48118 Y11.60232
G01 X-43.53178 Y11.62046
G01 X-43.59101 Y11.81995
G01 X-43.60069 Y11.88114
G01 X-43.60948 Y11.99201
G01 X-43.60948 Y13.10311
G01 X-43.61032 Y13.13755
G01 X-43.61199 Y13.17187
G01 X-43.61705 Y13.20585
G01 X-43.63046 Y13.27331
G01 X-43.63882 Y13.30664
G01 X-43.65037 Y13.33897
G01 X-43.67671 Y13.40255
G01 X-43.69140 Y13.43364
G01 X-43.70905 Y13.46305
G01 X-43.74733 Y13.52035
G01 X-43.76775 Y13.54791
G01 X-43.79086 Y13.57339
G01 X-43.81456 Y13.59828
G01 X-43.88771 Y13.67141
G01 X-44.17151 Y13.95520
G01 X-44.50445 Y14.28817
G01 X-44.55954 Y14.35020
G01 X-44.58837 Y14.38672
G01 X-44.69759 Y14.57522
G01 X-44.72294 Y14.63640
G01 X-44.75111 Y14.73247
G01 X-44.75634 Y14.75027
G01 X-44.72858 Y14.83572
G01 X-44.68258 Y14.91532
G01 X-44.67272 Y14.92106
G01 X-44.61154 Y14.95223
G01 X-44.35886 Y15.03661
G01 X-44.29767 Y15.04628
G01 X-44.18680 Y15.05507
G01 X-43.02495 Y15.05507
G01 X-42.99051 Y15.05591
G01 X-42.95622 Y15.05761
G01 X-42.92221 Y15.06264
G01 X-42.85474 Y15.07608
G01 X-42.82139 Y15.08444
G01 X-42.78909 Y15.09599
G01 X-42.72548 Y15.12233
G01 X-42.69447 Y15.13699
G01 X-42.66498 Y15.15467
G01 X-42.60770 Y15.19294
G01 X-42.59790 Y15.20021
G01 X-42.58009 Y15.21342
G01 X-42.55467 Y15.23645
G01 X-42.52978 Y15.26018
G01 X-41.81144 Y15.97849
G01 X-41.79155 Y15.99762
G01 X-41.78015 Y16.00816
G01 X-41.67182 Y16.09063
G01 X-41.66600 Y16.09157
G01 X-41.60481 Y16.10127
G01 X-41.49379 Y16.11006
G01 X-40.04693 Y16.11006
G01 X-40.00621 Y16.11126
G01 X-39.98876 Y16.11329
G01 X-39.90265 Y16.13975
G01 X-39.83011 Y16.18362
G01 X-39.77019 Y16.24351
G01 X-39.75213 Y16.27105
G01 X-39.72635 Y16.31603
G01 X-39.69989 Y16.40216
G01 X-39.69785 Y16.41961
G01 X-39.69666 Y16.46030
G01 X-39.69666 Y18.86032
G01 X-39.69785 Y18.90104
G01 X-39.69989 Y18.91849
G01 X-39.72635 Y19.00460
G01 X-39.77022 Y19.07714
G01 X-39.83011 Y19.13703
G01 X-39.90265 Y19.18090
G01 X-39.98876 Y19.20736
G01 X-40.00621 Y19.20940
G01 X-40.04693 Y19.21056
G01 X-42.44695 Y19.21056
G01 X-42.48764 Y19.20940
G01 X-42.50509 Y19.20736
G01 X-42.59119 Y19.18090
G01 X-42.66374 Y19.13703
G01 X-42.72363 Y19.07716
G01 X-42.72404 Y19.07658
G01 X-42.76747 Y19.00462
G01 X-42.79396 Y18.91849
G01 X-42.79599 Y18.90101
G01 X-42.79716 Y18.86032
G01 X-42.79716 Y17.15946
G01 X-42.79772 Y17.13195
G01 X-42.79833 Y17.11641
G01 X-42.81662 Y16.98143
G01 X-42.82015 Y16.97653
G01 X-42.85657 Y16.92642
G01 X-42.92876 Y16.84181
G01 X-43.11197 Y16.65860
G01 X-43.17400 Y16.60351
G01 X-43.21052 Y16.57468
G01 X-43.33199 Y16.49660
G01 X-43.39902 Y16.49370
G01 X-43.46023 Y16.49370
G01 X-43.71260 Y16.53472
G01 X-43.77379 Y16.55459
G01 X-43.83046 Y16.57498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.08693 Y21.24795 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.08693 Y21.24795
G01 X-42.08693 Y21.27957
G01 X-42.14461 Y21.31041
G01 X-42.22447 Y21.36377
G01 X-42.40631 Y21.51300
G01 X-42.47425 Y21.58094
G01 X-42.62348 Y21.76278
G01 X-42.67684 Y21.84264
G01 X-42.70768 Y21.90032
G01 X-42.73930 Y21.90032
G01 X-42.73100 Y21.88348
G01 X-42.60646 Y21.69710
G01 X-42.45866 Y21.52854
G01 X-42.29015 Y21.38076
G01 X-42.10377 Y21.25625
G01 X-42.08693 Y21.24795
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.75452 Y21.90032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.75452 Y21.90032
G01 X-39.76283 Y21.88348
G01 X-39.88736 Y21.69712
G01 X-40.03514 Y21.52859
G01 X-40.20370 Y21.38079
G01 X-40.39008 Y21.25625
G01 X-40.40692 Y21.24795
G01 X-40.40692 Y21.27960
G01 X-40.34926 Y21.31041
G01 X-40.26941 Y21.36377
G01 X-40.08757 Y21.51300
G01 X-40.01962 Y21.58094
G01 X-39.87040 Y21.76278
G01 X-39.81703 Y21.84264
G01 X-39.78620 Y21.90032
G01 X-39.75452 Y21.90032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.48887 Y24.59630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.48887 Y24.59630
G01 X-37.49684 Y24.60433
G01 X-37.54391 Y24.59968
G01 X-37.63997 Y24.59968
G01 X-37.68701 Y24.60433
G01 X-37.71000 Y24.58132
G01 X-37.68026 Y24.58724
G01 X-37.61196 Y24.59394
G01 X-37.56395 Y24.59630
G01 X-37.48887 Y24.59630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.38401 Y26.16841 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.38401 Y26.16841
G01 X-39.34921 Y26.16298
G01 X-39.28810 Y26.15993
G01 X-39.18579 Y26.16557
G01 X-39.08686 Y26.19234
G01 X-39.08556 Y26.19302
G01 X-38.87495 Y25.98241
G01 X-38.87957 Y25.93537
G01 X-38.87957 Y25.83928
G01 X-38.87820 Y25.82536
G01 X-38.87495 Y25.79224
G01 X-39.08620 Y25.58099
G01 X-39.09796 Y25.58624
G01 X-39.19806 Y25.60750
G01 X-39.25889 Y25.61390
G01 X-39.36133 Y25.61390
G01 X-39.38256 Y25.60941
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.36963 Y24.62818 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.36963 Y24.62818
G01 X-40.43583 Y24.61505
G01 X-40.59191 Y24.59968
G01 X-40.68797 Y24.59968
G01 X-40.84403 Y24.61505
G01 X-40.93824 Y24.63379
G01 X-41.08833 Y24.67931
G01 X-41.17707 Y24.71606
G01 X-41.31538 Y24.79000
G01 X-41.35757 Y24.81817
G01 X-41.35759 Y24.81820
G01 X-41.37608 Y24.86674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.29911 Y27.88301 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.29911 Y27.88301
G01 X-46.29914 Y27.82957
G01 X-46.29914 Y27.56772
G01 X-46.28268 Y27.48494
G01 X-46.23714 Y27.33488
G01 X-46.20038 Y27.24613
G01 X-46.15715 Y27.16526
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.43952 Y24.79945 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.43952 Y24.79945
G01 X-48.45509 Y24.78388
G01 X-48.48618 Y24.74604
G01 X-48.53954 Y24.66615
G01 X-48.55384 Y24.63941
G01 X-48.57127 Y24.65510
G01 X-48.56322 Y24.67286
G01 X-48.48529 Y24.78530
G01 X-48.43952 Y24.83110
G01 X-48.43952 Y24.79945
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.64470 Y24.68561 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.64470 Y24.68561
G01 X-46.71377 Y24.78533
G01 X-46.75951 Y24.83110
G01 X-46.75951 Y24.79945
G01 X-46.74399 Y24.78388
G01 X-46.71290 Y24.74604
G01 X-46.66068 Y24.66791
G01 X-46.64470 Y24.68561
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.84232 Y22.07678 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.84232 Y22.07678
G01 X-46.84978 Y22.08290
G01 X-46.92967 Y22.13626
G01 X-46.97287 Y22.15938
G01 X-47.06162 Y22.19613
G01 X-47.10853 Y22.21035
G01 X-47.20274 Y22.22910
G01 X-47.22258 Y22.23106
G01 X-47.25151 Y22.23390
G01 X-47.29954 Y22.23626
G01 X-47.89954 Y22.23626
G01 X-47.94757 Y22.23390
G01 X-47.99634 Y22.22910
G01 X-48.09055 Y22.21035
G01 X-48.13744 Y22.19613
G01 X-48.22618 Y22.15938
G01 X-48.26941 Y22.13626
G01 X-48.34927 Y22.08290
G01 X-48.38717 Y22.05181
G01 X-48.40233 Y22.03664
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.19874 Y18.26576 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.19874 Y18.26576
G01 X-52.18683 Y18.24790
G01 X-52.11289 Y18.10960
G01 X-52.07614 Y18.02085
G01 X-52.03410 Y17.88230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.97058 Y18.37249 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.97058 Y18.37249
G01 X-52.03413 Y18.28829
G01 X-52.03410 Y18.28826
G01 X-52.03933 Y18.28138
G01 X-52.05798 Y18.27534
G01 X-52.15986 Y18.26462
G01 X-52.19674 Y18.26462
G01 X-52.19874 Y18.26576
G01 X-52.19877 Y18.26579
G01 X-52.22102 Y18.27843
G01 X-52.26885 Y18.30424
G01 X-52.40575 Y18.39477
G01 X-52.45409 Y18.43378
G01 X-52.46730 Y18.44419
G01 X-52.50245 Y18.47135
G01 X-52.58637 Y18.54633
G01 X-52.59001 Y18.55006
G01 X-52.62117 Y18.67655
G01 X-52.63087 Y18.73774
G01 X-52.63969 Y18.84879
G01 X-52.63969 Y20.27734
G01 X-52.63961 Y20.28704
G01 X-52.63954 Y20.29255
G01 X-52.62734 Y20.41396
G01 X-52.62214 Y20.44168
G01 X-52.60306 Y20.47017
G01 X-52.58802 Y20.49380
G01 X-52.56019 Y20.53434
G01 X-52.53961 Y20.56217
G01 X-52.53743 Y20.56515
G01 X-52.52247 Y20.59204
G01 X-52.49956 Y20.63538
G01 X-52.48109 Y20.67304
G01 X-52.47304 Y20.69852
G01 X-52.45917 Y20.74554
G01 X-52.44566 Y20.79895
G01 X-52.44274 Y20.81285
G01 X-52.43082 Y20.86093
G01 X-52.42925 Y20.86644
G01 X-52.42861 Y20.89626
G01 X-52.42861 Y21.49626
G01 X-52.42950 Y21.53174
G01 X-52.43192 Y21.58076
G01 X-52.43905 Y21.65308
G01 X-52.44634 Y21.70210
G01 X-52.46141 Y21.77769
G01 X-52.47367 Y21.82666
G01 X-52.49862 Y21.90870
G01 X-52.51614 Y21.95773
G01 X-52.55429 Y22.04952
G01 X-52.55732 Y22.05592
G01 X-52.55734 Y22.87421
G01 X-52.55173 Y22.94817
G01 X-52.53501 Y23.02044
G01 X-52.51739 Y23.07682
G01 X-52.48998 Y23.14568
G01 X-52.45252 Y23.20964
G01 X-52.37626 Y23.31970
G01 X-52.37405 Y23.32455
G01 X-52.39219 Y23.34086
G01 X-52.39994 Y23.32638
G01 X-52.45330 Y23.24652
G01 X-52.48439 Y23.20863
G01 X-52.55231 Y23.14071
G01 X-52.59018 Y23.10962
G01 X-52.67007 Y23.05625
G01 X-52.71327 Y23.03316
G01 X-52.80202 Y22.99638
G01 X-52.84893 Y22.98216
G01 X-52.94314 Y22.96341
G01 X-52.99191 Y22.95861
G01 X-53.03994 Y22.95625
G01 X-53.63994 Y22.95625
G01 X-53.68797 Y22.95861
G01 X-53.73674 Y22.96341
G01 X-53.83095 Y22.98216
G01 X-53.87784 Y22.99638
G01 X-53.96658 Y23.03316
G01 X-54.00981 Y23.05625
G01 X-54.08967 Y23.10962
G01 X-54.12757 Y23.14071
G01 X-54.19549 Y23.20863
G01 X-54.22658 Y23.24652
G01 X-54.27994 Y23.32638
G01 X-54.28647 Y23.33857
G01 X-54.30354 Y23.31960
G01 X-54.22218 Y23.20220
G01 X-54.18464 Y23.13814
G01 X-54.15721 Y23.06913
G01 X-54.13961 Y23.01274
G01 X-54.12295 Y22.94058
G01 X-54.11733 Y22.86674
G01 X-54.11733 Y22.06022
G01 X-54.12356 Y22.04708
G01 X-54.16143 Y21.95587
G01 X-54.17898 Y21.90685
G01 X-54.20374 Y21.82537
G01 X-54.21601 Y21.77640
G01 X-54.23102 Y21.70114
G01 X-54.23829 Y21.65211
G01 X-54.24535 Y21.58051
G01 X-54.24776 Y21.53149
G01 X-54.24863 Y21.49626
G01 X-54.24863 Y20.89626
G01 X-54.24774 Y20.86106
G01 X-54.24761 Y20.85816
G01 X-54.23699 Y20.81287
G01 X-54.23570 Y20.80639
G01 X-54.22071 Y20.74569
G01 X-54.20684 Y20.69870
G01 X-54.19874 Y20.67302
G01 X-54.18027 Y20.63538
G01 X-54.15739 Y20.59204
G01 X-54.14243 Y20.56512
G01 X-54.13074 Y20.54935
G01 X-54.11954 Y20.53446
G01 X-54.09140 Y20.49413
G01 X-54.06186 Y20.44853
G01 X-54.05744 Y20.44178
G01 X-54.04896 Y20.38839
G01 X-54.04017 Y20.27734
G01 X-54.04017 Y18.62481
G01 X-54.04045 Y18.60460
G01 X-54.04078 Y18.59317
G01 X-54.05721 Y18.46032
G01 X-54.06061 Y18.44470
G01 X-54.08035 Y18.41910
G01 X-54.08904 Y18.40762
G01 X-54.12272 Y18.36213
G01 X-54.15719 Y18.31915
G01 X-54.17415 Y18.29964
G01 X-54.19203 Y18.27909
G01 X-54.22086 Y18.23980
G01 X-54.25879 Y18.18240
G01 X-54.29577 Y18.11996
G01 X-54.33265 Y18.04404
G01 X-54.35967 Y17.98064
G01 X-54.37245 Y17.94610
G01 X-54.40463 Y17.83040
G01 X-54.41982 Y17.76312
G01 X-54.42000 Y17.76203
G01 X-54.43407 Y17.60693
G01 X-54.43633 Y17.57249
G01 X-54.43407 Y17.53802
G01 X-54.42000 Y17.38293
G01 X-54.41982 Y17.38184
G01 X-54.40461 Y17.31453
G01 X-54.37245 Y17.19886
G01 X-54.35967 Y17.16429
G01 X-54.33265 Y17.10092
G01 X-54.32528 Y17.08575
G01 X-54.31807 Y17.07041
G01 X-54.31398 Y17.06147
G01 X-54.27494 Y16.95395
G01 X-54.26978 Y16.93543
G01 X-54.25205 Y16.87958
G01 X-54.25015 Y16.87425
G01 X-54.20865 Y16.71230
G01 X-54.20100 Y16.66642
G01 X-54.24230 Y16.59487
G01 X-54.25193 Y16.58959
G01 X-54.31312 Y16.55842
G01 X-54.56580 Y16.47404
G01 X-54.62698 Y16.46437
G01 X-54.73788 Y16.45558
G01 X-54.93582 Y16.45558
G01 X-54.99104 Y16.45776
G01 X-55.02203 Y16.46020
G01 X-55.19546 Y16.49520
G01 X-55.25665 Y16.51506
G01 X-55.34895 Y16.55078
G01 X-55.73531 Y16.43889
G01 X-57.33531 Y16.43889
G01 X-57.64189 Y16.50935
G01 X-57.76663 Y16.59530
G01 X-57.79767 Y16.61672
G01 X-57.81593 Y16.67686
G01 X-57.82533 Y16.77247
G01 X-57.82530 Y17.26261
G01 X-57.82352 Y17.27470
G01 X-57.81415 Y17.36947
G01 X-57.80645 Y17.52631
G01 X-57.80645 Y17.61864
G01 X-57.81415 Y17.77546
G01 X-57.82352 Y17.87021
G01 X-57.82530 Y17.88230
G01 X-57.82533 Y18.33637
G01 X-57.79292 Y18.37249
G01 X-57.69629 Y18.49378
G01 X-57.66480 Y18.53091
G01 X-57.60752 Y18.59433
G01 X-57.55212 Y18.64920
G01 X-57.53516 Y18.66055
G01 X-57.47958 Y18.69304
G01 X-57.39348 Y18.71951
G01 X-57.37598 Y18.72156
G01 X-57.33531 Y18.72273
G01 X-55.73531 Y18.72273
G01 X-55.69467 Y18.72156
G01 X-55.67717 Y18.71951
G01 X-55.59104 Y18.69304
G01 X-55.51855 Y18.64920
G01 X-55.45861 Y18.58925
G01 X-55.41477 Y18.51676
G01 X-55.38830 Y18.43063
G01 X-55.38624 Y18.41313
G01 X-55.38507 Y18.37249
G01 X-55.38507 Y16.90480
G01 X-55.37628 Y16.79393
G01 X-55.37291 Y16.77247
G01 X-55.36767 Y16.73239
G01 X-55.34895 Y16.55078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.25193 Y16.58959 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.25193 Y16.58959
G01 X-54.24149 Y16.59530
G01 X-54.12079 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.20138 Y16.66871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.20138 Y16.66871
G01 X-54.16067 Y16.62799
G01 X-54.12079 Y16.59530
G01 X-54.01553 Y16.55766
G01 X-53.92950 Y16.53147
G01 X-53.77266 Y16.49220
G01 X-53.69826 Y16.47735
G01 X-53.54144 Y16.45410
G01 X-53.47372 Y16.44740
G01 X-53.31688 Y16.43970
G01 X-53.25137 Y16.43970
G01 X-53.09453 Y16.44740
G01 X-53.02681 Y16.45410
G01 X-52.86999 Y16.47735
G01 X-52.79559 Y16.49220
G01 X-52.63875 Y16.53147
G01 X-52.55272 Y16.55766
G01 X-52.44741 Y16.59533
G01 X-51.97543 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.44741 Y16.59533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.44741 Y16.59533
G01 X-52.40761 Y16.62799
G01 X-52.33969 Y16.69591
G01 X-52.24020 Y16.81715
G01 X-52.18683 Y16.89703
G01 X-52.11289 Y17.03533
G01 X-52.07614 Y17.12408
G01 X-52.03410 Y17.26261
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.51320 Y16.59530 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.51320 Y16.59530
G01 X-49.48097 Y16.61948
G01 X-49.46355 Y16.67686
G01 X-49.45415 Y16.77247
G01 X-49.45415 Y17.42393
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.83992 Y17.41880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.83992 Y17.41880
G01 X-48.91473 Y17.37564
G01 X-49.01216 Y17.34399
G01 X-49.11404 Y17.33327
G01 X-49.17523 Y17.33327
G01 X-49.27708 Y17.34399
G01 X-49.37452 Y17.37564
G01 X-49.45105 Y17.41984
G01 X-49.45415 Y17.42393
G01 X-49.45986 Y17.43150
G01 X-49.49103 Y17.49269
G01 X-49.57541 Y17.74536
G01 X-49.58508 Y17.80655
G01 X-49.59387 Y17.91742
G01 X-49.59387 Y18.37249
G01 X-49.59504 Y18.41313
G01 X-49.59710 Y18.43063
G01 X-49.62357 Y18.51676
G01 X-49.66741 Y18.58925
G01 X-49.72735 Y18.64920
G01 X-49.79984 Y18.69304
G01 X-49.88597 Y18.71951
G01 X-49.90347 Y18.72156
G01 X-49.94414 Y18.72273
G01 X-51.54414 Y18.72273
G01 X-51.58478 Y18.72156
G01 X-51.60228 Y18.71951
G01 X-51.68838 Y18.69304
G01 X-51.74396 Y18.66055
G01 X-51.76092 Y18.64920
G01 X-51.82508 Y18.58443
G01 X-51.89339 Y18.49195
G01 X-51.92986 Y18.43807
G01 X-51.97058 Y18.37249
G01 X-52.03410 Y18.28826
G01 X-52.03410 Y17.88230
G01 X-52.03232 Y17.87021
G01 X-52.02295 Y17.77546
G01 X-52.01525 Y17.61864
G01 X-52.01525 Y17.52631
G01 X-52.02295 Y17.36947
G01 X-52.03232 Y17.27470
G01 X-52.03410 Y17.26261
G01 X-52.03413 Y16.77247
G01 X-52.02473 Y16.67686
G01 X-52.00647 Y16.61672
G01 X-51.97543 Y16.59530
G01 X-51.85069 Y16.50935
G01 X-51.54414 Y16.43889
G01 X-49.94414 Y16.43889
G01 X-49.61053 Y16.52230
G01 X-49.51320 Y16.59530
G01 X-48.34389 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.79431 Y16.59533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.79431 Y16.59533
G01 X-46.69261 Y16.67879
G01 X-46.62469 Y16.74671
G01 X-46.52520 Y16.86795
G01 X-46.47183 Y16.94783
G01 X-46.39789 Y17.08613
G01 X-46.36114 Y17.17488
G01 X-46.31910 Y17.31341
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.31910 Y17.93310 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.31910 Y17.93310
G01 X-46.36114 Y18.07165
G01 X-46.39789 Y18.16040
G01 X-46.47183 Y18.29870
G01 X-46.52520 Y18.37856
G01 X-46.53310 Y18.38821
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.31913 Y18.38717 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.31913 Y18.38717
G01 X-46.31910 Y17.93310
G01 X-46.31732 Y17.92101
G01 X-46.30795 Y17.82626
G01 X-46.30025 Y17.66944
G01 X-46.30025 Y17.57711
G01 X-46.30795 Y17.42027
G01 X-46.31732 Y17.32550
G01 X-46.31910 Y17.31341
G01 X-46.31913 Y16.82327
G01 X-46.30973 Y16.72766
G01 X-46.28184 Y16.63574
G01 X-46.27206 Y16.61743
G01 X-46.23810 Y16.59530
G01 X-46.79431 Y16.59533
G01 X-46.81956 Y16.58631
G01 X-46.91102 Y16.55847
G01 X-47.06784 Y16.51918
G01 X-47.14745 Y16.50330
G01 X-47.30427 Y16.48006
G01 X-47.37704 Y16.47288
G01 X-47.53386 Y16.46518
G01 X-47.60439 Y16.46518
G01 X-47.76121 Y16.47288
G01 X-47.83398 Y16.48006
G01 X-47.99080 Y16.50330
G01 X-48.07041 Y16.51918
G01 X-48.22723 Y16.55847
G01 X-48.31869 Y16.58631
G01 X-48.34389 Y16.59530
G01 X-48.44567 Y16.67879
G01 X-48.51359 Y16.74671
G01 X-48.61308 Y16.86795
G01 X-48.66644 Y16.94783
G01 X-48.74038 Y17.08613
G01 X-48.77714 Y17.17488
G01 X-48.82268 Y17.32494
G01 X-48.84091 Y17.41671
G01 X-48.83992 Y17.41880
G01 X-48.83992 Y17.41882
G01 X-48.83970 Y17.41936
G01 X-48.83228 Y17.43548
G01 X-48.80340 Y17.49982
G01 X-48.77025 Y17.58380
G01 X-48.74432 Y17.66022
G01 X-48.73116 Y17.70307
G01 X-48.72110 Y17.73967
G01 X-48.70619 Y17.80610
G01 X-48.70482 Y17.81389
G01 X-48.68961 Y17.88120
G01 X-48.65745 Y17.99690
G01 X-48.64467 Y18.03144
G01 X-48.61765 Y18.09484
G01 X-48.58077 Y18.17076
G01 X-48.54379 Y18.23320
G01 X-48.50586 Y18.29060
G01 X-48.47703 Y18.32989
G01 X-48.40604 Y18.41156
G01 X-48.38783 Y18.43167
G01 X-48.35910 Y18.46225
G01 X-48.31287 Y18.51656
G01 X-48.29273 Y18.54270
G01 X-48.28641 Y18.57173
G01 X-48.26997 Y18.70457
G01 X-48.26964 Y18.71600
G01 X-48.26936 Y18.73622
G01 X-48.26936 Y20.24005
G01 X-48.27815 Y20.35110
G01 X-48.28786 Y20.41229
G01 X-48.28844 Y20.41582
G01 X-48.30571 Y20.43985
G01 X-48.34815 Y20.49649
G01 X-48.36007 Y20.51196
G01 X-48.36350 Y20.51628
G01 X-48.36997 Y20.52433
G01 X-48.37863 Y20.53489
G01 X-48.40203 Y20.56515
G01 X-48.41699 Y20.59204
G01 X-48.43987 Y20.63538
G01 X-48.45834 Y20.67302
G01 X-48.46644 Y20.69870
G01 X-48.48031 Y20.74569
G01 X-48.49377 Y20.79895
G01 X-48.49387 Y20.79944
G01 X-48.49611 Y20.81046
G01 X-48.49657 Y20.81287
G01 X-48.50769 Y20.86100
G01 X-48.51714 Y20.89626
G01 X-48.52093 Y20.90990
G01 X-48.52093 Y21.49626
G01 X-48.52001 Y21.53273
G01 X-48.51762 Y21.58176
G01 X-48.51031 Y21.65587
G01 X-48.50304 Y21.70489
G01 X-48.48752 Y21.78275
G01 X-48.47526 Y21.83174
G01 X-48.44965 Y21.91592
G01 X-48.43210 Y21.96494
G01 X-48.40233 Y22.03664
G01 X-48.40233 Y22.90339
G01 X-48.40795 Y22.97723
G01 X-48.42461 Y23.04939
G01 X-48.44221 Y23.10578
G01 X-48.46964 Y23.17479
G01 X-48.50718 Y23.23885
G01 X-48.56322 Y23.31970
G01 X-48.57167 Y23.33834
G01 X-48.55552 Y23.35628
G01 X-48.53954 Y23.32638
G01 X-48.48618 Y23.24652
G01 X-48.45509 Y23.20863
G01 X-48.38717 Y23.14071
G01 X-48.34927 Y23.10962
G01 X-48.26941 Y23.05625
G01 X-48.22618 Y23.03316
G01 X-48.13744 Y22.99638
G01 X-48.09055 Y22.98216
G01 X-47.99634 Y22.96341
G01 X-47.94757 Y22.95861
G01 X-47.89954 Y22.95625
G01 X-47.29954 Y22.95625
G01 X-47.25151 Y22.95861
G01 X-47.20274 Y22.96341
G01 X-47.10853 Y22.98216
G01 X-47.06162 Y22.99638
G01 X-46.97287 Y23.03316
G01 X-46.92967 Y23.05625
G01 X-46.84978 Y23.10962
G01 X-46.81191 Y23.14071
G01 X-46.74399 Y23.20863
G01 X-46.71290 Y23.24652
G01 X-46.66012 Y23.32549
G01 X-46.64270 Y23.30982
G01 X-46.73749 Y23.17299
G01 X-46.77498 Y23.10903
G01 X-46.80239 Y23.04017
G01 X-46.82001 Y22.98378
G01 X-46.83673 Y22.91152
G01 X-46.84234 Y22.83756
G01 X-46.84232 Y22.07678
G01 X-46.82375 Y22.03751
G01 X-46.78682 Y21.94863
G01 X-46.76929 Y21.89961
G01 X-46.74519 Y21.82031
G01 X-46.73292 Y21.77132
G01 X-46.71834 Y21.69832
G01 X-46.71107 Y21.64929
G01 X-46.70495 Y21.59291
G01 X-46.70404 Y21.57952
G01 X-46.70384 Y21.57662
G01 X-46.70320 Y21.56786
G01 X-46.70198 Y21.55321
G01 X-46.70038 Y21.53591
G01 X-46.70013 Y21.53068
G01 X-46.69926 Y21.49626
G01 X-46.69926 Y20.89626
G01 X-46.70013 Y20.86187
G01 X-46.70038 Y20.85664
G01 X-46.70198 Y20.83934
G01 X-46.70320 Y20.82468
G01 X-46.70384 Y20.81592
G01 X-46.70434 Y20.80876
G01 X-46.70589 Y20.79720
G01 X-46.70632 Y20.79413
G01 X-46.71877 Y20.74554
G01 X-46.73264 Y20.69852
G01 X-46.74069 Y20.67304
G01 X-46.75916 Y20.63538
G01 X-46.78207 Y20.59204
G01 X-46.81214 Y20.54048
G01 X-46.81745 Y20.53243
G01 X-46.82108 Y20.52687
G01 X-46.84341 Y20.49032
G01 X-46.85375 Y20.47223
G01 X-46.85687 Y20.44838
G01 X-46.86132 Y20.41813
G01 X-46.86888 Y20.31529
G01 X-46.86888 Y18.96342
G01 X-46.86007 Y18.85240
G01 X-46.85037 Y18.79121
G01 X-46.78245 Y18.57249
G01 X-46.75667 Y18.55176
G01 X-46.72548 Y18.52766
G01 X-46.70838 Y18.51412
G01 X-46.65758 Y18.47280
G01 X-46.53310 Y18.38821
G01 X-46.53269 Y18.38796
G01 X-46.45024 Y18.37927
G01 X-46.38905 Y18.37927
G01 X-46.32057 Y18.38557
G01 X-46.31913 Y18.38717
G01 X-46.28672 Y18.42327
G01 X-46.19009 Y18.54458
G01 X-46.15860 Y18.58171
G01 X-46.10132 Y18.64513
G01 X-46.04590 Y18.70000
G01 X-45.97341 Y18.74384
G01 X-45.88728 Y18.77031
G01 X-45.86978 Y18.77236
G01 X-45.82914 Y18.77353
G01 X-44.22914 Y18.77353
G01 X-44.18847 Y18.77236
G01 X-44.17097 Y18.77031
G01 X-44.08484 Y18.74384
G01 X-44.01235 Y18.70000
G01 X-43.95241 Y18.64005
G01 X-43.90857 Y18.56756
G01 X-43.88210 Y18.48143
G01 X-43.88004 Y18.46393
G01 X-43.87887 Y18.42327
G01 X-43.87887 Y16.97625
G01 X-43.87008 Y16.86538
G01 X-43.86343 Y16.82327
G01 X-43.86066 Y16.80412
G01 X-43.83046 Y16.57498
G01 X-44.22914 Y16.46432
G01 X-45.82914 Y16.46432
G01 X-46.14102 Y16.53206
G01 X-46.23810 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.93394 Y14.91532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.93394 Y14.91532
G01 X-44.75111 Y14.73247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.68258 Y14.91532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.68258 Y14.91532
G01 X-44.93394 Y14.91532
G01 X-45.61842 Y15.19884
G01 X-45.63828 Y15.20651
G01 X-45.70689 Y15.23107
G01 X-45.74008 Y15.24115
G01 X-45.80869 Y15.25832
G01 X-45.83693 Y15.26396
G01 X-45.90556 Y15.27415
G01 X-45.93101 Y15.27666
G01 X-45.99965 Y15.28004
G01 X-46.01194 Y15.28032
G01 X-63.53294 Y15.28032
G01 X-63.54520 Y15.28004
G01 X-63.61383 Y15.27666
G01 X-63.63926 Y15.27415
G01 X-63.70789 Y15.26396
G01 X-63.73614 Y15.25832
G01 X-63.80474 Y15.24115
G01 X-63.83794 Y15.23107
G01 X-63.90654 Y15.20651
G01 X-63.92641 Y15.19884
G01 X-64.61086 Y14.91532
G01 X-65.71627 Y13.80991
G01 X-65.76331 Y13.81456
G01 X-65.85937 Y13.81456
G01 X-66.01543 Y13.79917
G01 X-66.10964 Y13.78045
G01 X-66.25973 Y13.73491
G01 X-66.34847 Y13.69815
G01 X-66.48678 Y13.62424
G01 X-66.56664 Y13.57087
G01 X-66.68787 Y13.47138
G01 X-66.75579 Y13.40346
G01 X-66.85528 Y13.28223
G01 X-66.90865 Y13.20235
G01 X-66.98259 Y13.06404
G01 X-67.01934 Y12.97530
G01 X-67.06486 Y12.82523
G01 X-67.08360 Y12.73102
G01 X-67.09897 Y12.57494
G01 X-67.09897 Y12.47888
G01 X-67.08360 Y12.32282
G01 X-67.06486 Y12.22861
G01 X-67.01934 Y12.07852
G01 X-66.98259 Y11.98978
G01 X-66.90865 Y11.85147
G01 X-66.85528 Y11.77161
G01 X-66.75579 Y11.65038
G01 X-66.68787 Y11.58246
G01 X-66.56664 Y11.48297
G01 X-66.48678 Y11.42960
G01 X-66.34847 Y11.35566
G01 X-66.25973 Y11.31891
G01 X-66.10964 Y11.27339
G01 X-66.02681 Y11.25691
G01 X-65.59580 Y11.25691
G01 X-65.51302 Y11.24045
G01 X-65.36295 Y11.19491
G01 X-65.27421 Y11.15815
G01 X-65.13590 Y11.08424
G01 X-65.05602 Y11.03087
G01 X-64.93479 Y10.93138
G01 X-64.86687 Y10.86346
G01 X-64.76738 Y10.74223
G01 X-64.71401 Y10.66235
G01 X-64.64010 Y10.52404
G01 X-64.60334 Y10.43530
G01 X-64.55780 Y10.28523
G01 X-64.53908 Y10.19102
G01 X-64.52369 Y10.03494
G01 X-64.52369 Y9.93888
G01 X-64.53908 Y9.78282
G01 X-64.55780 Y9.68861
G01 X-64.60334 Y9.53852
G01 X-64.64010 Y9.44978
G01 X-64.71401 Y9.31147
G01 X-64.76738 Y9.23161
G01 X-64.86687 Y9.11038
G01 X-64.90294 Y9.07434
G01 X-64.90294 Y7.98201
G01 X-64.73415 Y7.89182
G01 X-64.65429 Y7.83845
G01 X-64.44213 Y7.66433
G01 X-64.37421 Y7.59641
G01 X-64.23794 Y7.43035
G01 X-64.20012 Y7.38427
G01 X-64.14673 Y7.30439
G01 X-64.01736 Y7.06235
G01 X-63.99293 Y7.00332
G01 X-63.99293 Y4.88778
G01 X-64.01025 Y4.84597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.97584 Y4.84653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.97584 Y4.84653
G01 X-63.99293 Y4.88778
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.99293 Y7.00332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.99293 Y7.00332
G01 X-63.96852 Y7.06235
G01 X-63.83913 Y7.30439
G01 X-63.78577 Y7.38427
G01 X-63.61165 Y7.59641
G01 X-63.54373 Y7.66433
G01 X-63.33159 Y7.83845
G01 X-63.25173 Y7.89182
G01 X-63.08292 Y7.98204
G01 X-63.08292 Y8.98338
G01 X-63.09608 Y8.99941
G01 X-63.14945 Y9.07927
G01 X-63.22339 Y9.21759
G01 X-63.26014 Y9.30632
G01 X-63.30566 Y9.45640
G01 X-63.32440 Y9.55061
G01 X-63.33977 Y9.70670
G01 X-63.33977 Y9.80273
G01 X-63.32440 Y9.95882
G01 X-63.30566 Y10.05303
G01 X-63.26014 Y10.20309
G01 X-63.22339 Y10.29184
G01 X-63.14945 Y10.43016
G01 X-63.09608 Y10.51002
G01 X-62.99659 Y10.63126
G01 X-62.92867 Y10.69918
G01 X-62.80744 Y10.79867
G01 X-62.72758 Y10.85203
G01 X-62.58927 Y10.92595
G01 X-62.50053 Y10.96273
G01 X-62.35044 Y11.00824
G01 X-62.26756 Y11.02473
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.83655 Y11.02473 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.83655 Y11.02473
G01 X-61.75382 Y11.00824
G01 X-61.60375 Y10.96273
G01 X-61.51501 Y10.92595
G01 X-61.37670 Y10.85203
G01 X-61.29682 Y10.79867
G01 X-61.17559 Y10.69918
G01 X-61.10767 Y10.63126
G01 X-61.00818 Y10.51002
G01 X-60.95481 Y10.43016
G01 X-60.88090 Y10.29184
G01 X-60.84414 Y10.20309
G01 X-60.79860 Y10.05303
G01 X-60.77988 Y9.95882
G01 X-60.76449 Y9.80273
G01 X-60.76449 Y9.70670
G01 X-60.77988 Y9.55061
G01 X-60.79860 Y9.45640
G01 X-60.84414 Y9.30632
G01 X-60.88090 Y9.21759
G01 X-60.95481 Y9.07927
G01 X-61.00818 Y8.99941
G01 X-61.10767 Y8.87817
G01 X-61.17559 Y8.81025
G01 X-61.29682 Y8.71076
G01 X-61.37670 Y8.65740
G01 X-61.40294 Y8.64338
G01 X-61.40294 Y7.98204
G01 X-61.23416 Y7.89182
G01 X-61.15428 Y7.83845
G01 X-60.94214 Y7.66433
G01 X-60.87422 Y7.59641
G01 X-60.73792 Y7.43035
G01 X-60.70010 Y7.38427
G01 X-60.64673 Y7.30439
G01 X-60.51737 Y7.06235
G01 X-60.49294 Y7.00335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.49294 Y6.96985 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.49294 Y6.96985
G01 X-60.49291 Y6.68306
G01 X-60.49294 Y6.60589
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.31594 Y13.01032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.31594 Y13.01032
G01 X-53.13311 Y12.82744
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.06458 Y13.01032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.06458 Y13.01032
G01 X-53.31594 Y13.01032
G01 X-53.36458 Y13.03046
G01 X-53.40977 Y13.04791
G01 X-53.47840 Y13.07248
G01 X-53.55988 Y13.09724
G01 X-53.62848 Y13.11444
G01 X-53.70265 Y13.12922
G01 X-53.77126 Y13.13940
G01 X-53.84131 Y13.14631
G01 X-53.90994 Y13.14969
G01 X-53.94433 Y13.15053
G01 X-57.68961 Y13.15053
G01 X-57.80315 Y13.20425
G01 X-57.85891 Y13.22739
G01 X-58.01573 Y13.28350
G01 X-58.05697 Y13.29605
G01 X-58.21379 Y13.33534
G01 X-58.24552 Y13.34167
G01 X-58.40234 Y13.36493
G01 X-58.42863 Y13.36752
G01 X-58.58547 Y13.37522
G01 X-58.60998 Y13.37522
G01 X-58.76680 Y13.36752
G01 X-58.79309 Y13.36493
G01 X-58.94991 Y13.34167
G01 X-58.98166 Y13.33534
G01 X-59.13848 Y13.29605
G01 X-59.17973 Y13.28350
G01 X-59.33655 Y13.22739
G01 X-59.39230 Y13.20425
G01 X-59.54912 Y13.13006
G01 X-59.62565 Y13.08904
G01 X-59.75697 Y13.01032
G01 X-60.14859 Y13.01032
G01 X-60.76914 Y12.38977
G01 X-60.76449 Y12.34273
G01 X-60.76449 Y12.24670
G01 X-60.77988 Y12.09061
G01 X-60.79860 Y11.99640
G01 X-60.84414 Y11.84632
G01 X-60.88090 Y11.75759
G01 X-60.95481 Y11.61927
G01 X-61.00818 Y11.53941
G01 X-61.10767 Y11.41817
G01 X-61.17559 Y11.35025
G01 X-61.29682 Y11.25076
G01 X-61.37670 Y11.19740
G01 X-61.51501 Y11.12346
G01 X-61.60375 Y11.08670
G01 X-61.75382 Y11.04119
G01 X-61.83655 Y11.02473
G01 X-62.00579 Y11.02473
G01 X-62.09842 Y11.02470
G01 X-62.26756 Y11.02473
G01 X-62.35044 Y11.04119
G01 X-62.50053 Y11.08670
G01 X-62.58927 Y11.12346
G01 X-62.72758 Y11.19740
G01 X-62.80744 Y11.25076
G01 X-62.92867 Y11.35025
G01 X-62.99659 Y11.41817
G01 X-63.09608 Y11.53941
G01 X-63.14945 Y11.61927
G01 X-63.22339 Y11.75759
G01 X-63.26014 Y11.84632
G01 X-63.30566 Y11.99640
G01 X-63.32440 Y12.09061
G01 X-63.33977 Y12.24670
G01 X-63.33977 Y12.34273
G01 X-63.32440 Y12.49882
G01 X-63.30566 Y12.59303
G01 X-63.26014 Y12.74309
G01 X-63.22339 Y12.83184
G01 X-63.14945 Y12.97016
G01 X-63.09608 Y13.05002
G01 X-62.99659 Y13.17126
G01 X-62.92867 Y13.23918
G01 X-62.80744 Y13.33867
G01 X-62.72758 Y13.39203
G01 X-62.58927 Y13.46595
G01 X-62.50053 Y13.50273
G01 X-62.35044 Y13.54824
G01 X-62.25623 Y13.56699
G01 X-62.10017 Y13.58236
G01 X-62.00411 Y13.58236
G01 X-61.95707 Y13.57771
G01 X-61.56944 Y13.96534
G01 X-60.89210 Y14.24590
G01 X-60.87196 Y14.25368
G01 X-60.80335 Y14.27824
G01 X-60.76962 Y14.28850
G01 X-60.70101 Y14.30567
G01 X-60.67223 Y14.31141
G01 X-60.60363 Y14.32160
G01 X-60.57767 Y14.32416
G01 X-60.50907 Y14.32752
G01 X-60.49652 Y14.32782
G01 X-50.39095 Y14.32782
G01 X-50.37840 Y14.32752
G01 X-50.30977 Y14.32416
G01 X-50.28381 Y14.32160
G01 X-50.21521 Y14.31141
G01 X-50.18643 Y14.30567
G01 X-50.11782 Y14.28850
G01 X-50.08409 Y14.27824
G01 X-50.01549 Y14.25368
G01 X-49.99535 Y14.24590
G01 X-49.31798 Y13.96534
G01 X-49.06654 Y13.96534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.31798 Y13.96534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.31798 Y13.96534
G01 X-49.13510 Y13.78243
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.52242 Y11.79389 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.52242 Y11.79389
G01 X-49.41104 Y11.68251
G01 X-49.56883 Y11.68251
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.77093 Y6.42105 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.77093 Y6.42105
G01 X-53.82861 Y6.39022
G01 X-53.90847 Y6.33685
G01 X-54.09031 Y6.18763
G01 X-54.15825 Y6.11968
G01 X-54.30748 Y5.93784
G01 X-54.36084 Y5.85799
G01 X-54.39165 Y5.80033
G01 X-54.42330 Y5.80033
G01 X-54.41500 Y5.81717
G01 X-54.29046 Y6.00355
G01 X-54.14266 Y6.17211
G01 X-53.97413 Y6.31989
G01 X-53.78777 Y6.44442
G01 X-53.77093 Y6.45273
G01 X-53.77093 Y6.42105
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.43852 Y5.80033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.43852 Y5.80033
G01 X-51.44683 Y5.81717
G01 X-51.57136 Y6.00353
G01 X-51.71914 Y6.17206
G01 X-51.88772 Y6.31986
G01 X-52.07408 Y6.44442
G01 X-52.09092 Y6.45273
G01 X-52.09092 Y6.42103
G01 X-52.03326 Y6.39022
G01 X-51.95341 Y6.33685
G01 X-51.77157 Y6.18763
G01 X-51.70362 Y6.11968
G01 X-51.55440 Y5.93784
G01 X-51.50103 Y5.85799
G01 X-51.47022 Y5.80033
G01 X-51.43852 Y5.80033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.39974 Y6.37325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.39974 Y6.37325
G01 X-49.39974 Y6.40490
G01 X-49.41656 Y6.39662
G01 X-49.60291 Y6.27208
G01 X-49.77144 Y6.12428
G01 X-49.91927 Y5.95573
G01 X-50.04381 Y5.76937
G01 X-50.05211 Y5.75253
G01 X-50.02047 Y5.75253
G01 X-49.98963 Y5.81018
G01 X-49.93626 Y5.89004
G01 X-49.78704 Y6.07191
G01 X-49.71912 Y6.13983
G01 X-49.53728 Y6.28905
G01 X-49.45740 Y6.34242
G01 X-49.39974 Y6.37325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-47.06733 Y4.07252 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.06733 Y4.07252
G01 X-47.07564 Y4.05570
G01 X-47.20018 Y3.86929
G01 X-47.34798 Y3.70079
G01 X-47.51648 Y3.55299
G01 X-47.70289 Y3.42845
G01 X-47.71971 Y3.42015
G01 X-47.71971 Y3.45179
G01 X-47.66208 Y3.48260
G01 X-47.58219 Y3.53597
G01 X-47.40035 Y3.68522
G01 X-47.33243 Y3.75314
G01 X-47.18321 Y3.93498
G01 X-47.12984 Y4.01484
G01 X-47.09901 Y4.07252
G01 X-47.06733 Y4.07252
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.14974 Y3.42015 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.14974 Y3.42015
G01 X-45.16655 Y3.42845
G01 X-45.35294 Y3.55299
G01 X-45.52147 Y3.70076
G01 X-45.66924 Y3.86929
G01 X-45.79380 Y4.05570
G01 X-45.80211 Y4.07252
G01 X-45.77046 Y4.07252
G01 X-45.73965 Y4.01484
G01 X-45.68629 Y3.93498
G01 X-45.53704 Y3.75314
G01 X-45.46912 Y3.68522
G01 X-45.28728 Y3.53597
G01 X-45.20739 Y3.48260
G01 X-45.14974 Y3.45177
G01 X-45.14974 Y3.42015
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.81733 Y5.75253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.81733 Y5.75253
G01 X-42.84900 Y5.75253
G01 X-42.87984 Y5.81018
G01 X-42.93321 Y5.89004
G01 X-43.08243 Y6.07191
G01 X-43.15035 Y6.13983
G01 X-43.33219 Y6.28905
G01 X-43.41207 Y6.34242
G01 X-43.46973 Y6.37325
G01 X-43.46973 Y6.40492
G01 X-43.45289 Y6.39662
G01 X-43.26650 Y6.27206
G01 X-43.09797 Y6.12425
G01 X-42.95017 Y5.95573
G01 X-42.82564 Y5.76937
G01 X-42.81733 Y5.75253
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.81736 Y4.07252 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.81736 Y4.07252
G01 X-42.84900 Y4.07252
G01 X-42.87984 Y4.01484
G01 X-42.93321 Y3.93498
G01 X-43.08243 Y3.75314
G01 X-43.15035 Y3.68522
G01 X-43.33219 Y3.53597
G01 X-43.41207 Y3.48260
G01 X-43.46973 Y3.45179
G01 X-43.46973 Y3.42015
G01 X-43.45289 Y3.42845
G01 X-43.26648 Y3.55299
G01 X-43.09797 Y3.70079
G01 X-42.95017 Y3.86929
G01 X-42.82564 Y4.05570
G01 X-42.81736 Y4.07252
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.14974 Y6.37325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.14974 Y6.37325
G01 X-45.20739 Y6.34242
G01 X-45.28728 Y6.28905
G01 X-45.46912 Y6.13983
G01 X-45.53704 Y6.07191
G01 X-45.68629 Y5.89004
G01 X-45.73965 Y5.81018
G01 X-45.77046 Y5.75253
G01 X-45.80211 Y5.75253
G01 X-45.79380 Y5.76937
G01 X-45.66927 Y5.95575
G01 X-45.52147 Y6.12428
G01 X-45.35294 Y6.27208
G01 X-45.16655 Y6.39662
G01 X-45.14974 Y6.40490
G01 X-45.14974 Y6.37325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-47.06733 Y5.75253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.06733 Y5.75253
G01 X-47.09901 Y5.75253
G01 X-47.12984 Y5.81018
G01 X-47.18321 Y5.89004
G01 X-47.33243 Y6.07191
G01 X-47.40035 Y6.13983
G01 X-47.58219 Y6.28905
G01 X-47.66208 Y6.34242
G01 X-47.71971 Y6.37323
G01 X-47.71971 Y6.40490
G01 X-47.70289 Y6.39662
G01 X-47.51651 Y6.27206
G01 X-47.34798 Y6.12425
G01 X-47.20018 Y5.95573
G01 X-47.07564 Y5.76937
G01 X-47.06733 Y5.75253
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.39974 Y3.42015 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.39974 Y3.42015
G01 X-49.39974 Y3.45179
G01 X-49.45740 Y3.48260
G01 X-49.53728 Y3.53597
G01 X-49.71912 Y3.68522
G01 X-49.78704 Y3.75314
G01 X-49.93626 Y3.93498
G01 X-49.98963 Y4.01484
G01 X-50.02047 Y4.07252
G01 X-50.05211 Y4.07252
G01 X-50.04381 Y4.05570
G01 X-49.91927 Y3.86932
G01 X-49.77144 Y3.70076
G01 X-49.60294 Y3.55296
G01 X-49.41656 Y3.42845
G01 X-49.39974 Y3.42015
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.43852 Y4.12032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.43852 Y4.12032
G01 X-51.47020 Y4.12032
G01 X-51.50103 Y4.06264
G01 X-51.55440 Y3.98278
G01 X-51.70362 Y3.80094
G01 X-51.77157 Y3.73300
G01 X-51.95341 Y3.58377
G01 X-52.03326 Y3.53041
G01 X-52.09092 Y3.49960
G01 X-52.09092 Y3.46795
G01 X-52.07408 Y3.47625
G01 X-51.88770 Y3.60079
G01 X-51.71914 Y3.74859
G01 X-51.57136 Y3.91712
G01 X-51.44683 Y4.10348
G01 X-51.43852 Y4.12032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.77093 Y3.46795 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.77093 Y3.46795
G01 X-53.78777 Y3.47625
G01 X-53.97415 Y3.60077
G01 X-54.14266 Y3.74854
G01 X-54.29046 Y3.91710
G01 X-54.41500 Y4.10348
G01 X-54.42330 Y4.12032
G01 X-54.39168 Y4.12032
G01 X-54.36084 Y4.06264
G01 X-54.30748 Y3.98278
G01 X-54.15825 Y3.80094
G01 X-54.09031 Y3.73300
G01 X-53.90847 Y3.58377
G01 X-53.82861 Y3.53041
G01 X-53.77093 Y3.49957
G01 X-53.77093 Y3.46795
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.47582 Y4.84653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.47582 Y4.84653
G01 X-60.49294 Y4.88781
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.51026 Y4.84597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.51026 Y4.84597
G01 X-60.49294 Y4.88781
G01 X-60.49294 Y7.00335
G01 X-60.46850 Y7.06235
G01 X-60.33914 Y7.30439
G01 X-60.28577 Y7.38427
G01 X-60.11166 Y7.59641
G01 X-60.04374 Y7.66433
G01 X-59.83160 Y7.83845
G01 X-59.75171 Y7.89182
G01 X-59.58291 Y7.98204
G01 X-59.58291 Y9.08379
G01 X-59.64168 Y9.15541
G01 X-59.69505 Y9.23527
G01 X-59.76899 Y9.37358
G01 X-59.80574 Y9.46232
G01 X-59.85126 Y9.61241
G01 X-59.87000 Y9.70662
G01 X-59.88537 Y9.86268
G01 X-59.88537 Y9.95874
G01 X-59.87000 Y10.11482
G01 X-59.85126 Y10.20903
G01 X-59.80574 Y10.35910
G01 X-59.76899 Y10.44784
G01 X-59.69505 Y10.58615
G01 X-59.64168 Y10.66603
G01 X-59.54219 Y10.78726
G01 X-59.47427 Y10.85518
G01 X-59.35304 Y10.95467
G01 X-59.27318 Y11.00804
G01 X-59.13487 Y11.08195
G01 X-59.04613 Y11.11871
G01 X-58.89604 Y11.16425
G01 X-58.81321 Y11.18071
G01 X-58.38220 Y11.18073
G01 X-58.29942 Y11.19719
G01 X-58.20772 Y11.22513
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.20826 Y11.13659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.20826 Y11.13659
G01 X-58.29942 Y11.16425
G01 X-58.38220 Y11.18073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.81321 Y11.18071 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.81321 Y11.18071
G01 X-58.89604 Y11.19719
G01 X-59.04613 Y11.24271
G01 X-59.13487 Y11.27946
G01 X-59.27318 Y11.35340
G01 X-59.35304 Y11.40677
G01 X-59.47427 Y11.50626
G01 X-59.54219 Y11.57418
G01 X-59.64168 Y11.69541
G01 X-59.69505 Y11.77527
G01 X-59.76899 Y11.91358
G01 X-59.80574 Y12.00232
G01 X-59.85126 Y12.15241
G01 X-59.87000 Y12.24662
G01 X-59.88537 Y12.40268
G01 X-59.88537 Y12.49874
G01 X-59.87282 Y12.62632
G01 X-59.87000 Y12.65482
G01 X-59.85126 Y12.74903
G01 X-59.80574 Y12.89910
G01 X-59.76899 Y12.98784
G01 X-59.75697 Y13.01032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.04313 Y16.58959 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.04313 Y16.58959
G01 X-60.03350 Y16.59487
G01 X-59.99220 Y16.66642
G01 X-59.99258 Y16.66871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.09974 Y16.54420 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.09974 Y16.54420
G01 X-61.13058 Y16.72167
G01 X-61.13241 Y16.73274
G01 X-61.14208 Y16.79393
G01 X-61.15087 Y16.90480
G01 X-61.15087 Y18.32167
G01 X-61.15204 Y18.36233
G01 X-61.15410 Y18.37983
G01 X-61.18057 Y18.46596
G01 X-61.22441 Y18.53845
G01 X-61.28435 Y18.59840
G01 X-61.35684 Y18.64224
G01 X-61.44297 Y18.66871
G01 X-61.46047 Y18.67076
G01 X-61.50111 Y18.67193
G01 X-63.10114 Y18.67193
G01 X-63.14178 Y18.67076
G01 X-63.15928 Y18.66871
G01 X-63.24541 Y18.64224
G01 X-63.31790 Y18.59840
G01 X-63.32773 Y18.58953
G01 X-63.38917 Y18.53302
G01 X-63.42303 Y18.49980
G01 X-63.59087 Y18.32431
G01 X-63.59113 Y18.32167
G01 X-63.59110 Y17.83150
G01 X-63.58932 Y17.81941
G01 X-63.57995 Y17.72466
G01 X-63.57225 Y17.56784
G01 X-63.57225 Y17.47552
G01 X-63.57995 Y17.31867
G01 X-63.58932 Y17.22390
G01 X-63.59110 Y17.21181
G01 X-63.59113 Y16.72167
G01 X-63.58173 Y16.62606
G01 X-63.57876 Y16.61631
G01 X-63.55005 Y16.59530
G01 X-63.40172 Y16.48679
G01 X-63.10114 Y16.41349
G01 X-61.50111 Y16.41349
G01 X-61.09974 Y16.54420
G01 X-61.02245 Y16.51506
G01 X-60.96126 Y16.49520
G01 X-60.78783 Y16.46020
G01 X-60.75684 Y16.45776
G01 X-60.70165 Y16.45558
G01 X-60.52908 Y16.45558
G01 X-60.41818 Y16.46437
G01 X-60.35700 Y16.47404
G01 X-60.10432 Y16.55842
G01 X-60.04313 Y16.58959
G01 X-60.03269 Y16.59530
G01 X-59.91199 Y16.59530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.23861 Y16.59533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.23861 Y16.59533
G01 X-58.19881 Y16.62799
G01 X-58.13089 Y16.69591
G01 X-58.03140 Y16.81715
G01 X-57.97803 Y16.89703
G01 X-57.90409 Y17.03533
G01 X-57.86734 Y17.12408
G01 X-57.82530 Y17.26261
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.76663 Y16.59530 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.76663 Y16.59530
G01 X-58.23861 Y16.59533
G01 X-58.34392 Y16.55766
G01 X-58.42995 Y16.53147
G01 X-58.58679 Y16.49220
G01 X-58.66119 Y16.47735
G01 X-58.81801 Y16.45410
G01 X-58.88573 Y16.44740
G01 X-59.04257 Y16.43970
G01 X-59.10808 Y16.43970
G01 X-59.26492 Y16.44740
G01 X-59.33264 Y16.45410
G01 X-59.48946 Y16.47735
G01 X-59.56386 Y16.49220
G01 X-59.72070 Y16.53147
G01 X-59.80673 Y16.55766
G01 X-59.91199 Y16.59530
G01 X-59.95187 Y16.62799
G01 X-59.99258 Y16.66871
G01 X-59.99985 Y16.71230
G01 X-60.04135 Y16.87425
G01 X-60.04325 Y16.87958
G01 X-60.06098 Y16.93543
G01 X-60.06614 Y16.95395
G01 X-60.10518 Y17.06147
G01 X-60.10927 Y17.07041
G01 X-60.11648 Y17.08575
G01 X-60.12385 Y17.10092
G01 X-60.15087 Y17.16429
G01 X-60.16365 Y17.19886
G01 X-60.19581 Y17.31453
G01 X-60.21102 Y17.38184
G01 X-60.21120 Y17.38293
G01 X-60.22527 Y17.53802
G01 X-60.22753 Y17.57249
G01 X-60.22527 Y17.60693
G01 X-60.21120 Y17.76203
G01 X-60.21102 Y17.76312
G01 X-60.19583 Y17.83040
G01 X-60.16365 Y17.94610
G01 X-60.15087 Y17.98064
G01 X-60.12385 Y18.04404
G01 X-60.08697 Y18.11996
G01 X-60.04999 Y18.18240
G01 X-60.01206 Y18.23980
G01 X-59.98321 Y18.27912
G01 X-59.95715 Y18.30909
G01 X-59.91224 Y18.36076
G01 X-59.89406 Y18.38087
G01 X-59.86530 Y18.41145
G01 X-59.81907 Y18.46576
G01 X-59.79893 Y18.49190
G01 X-59.79261 Y18.52093
G01 X-59.77617 Y18.65377
G01 X-59.77584 Y18.66520
G01 X-59.77556 Y18.68544
G01 X-59.77556 Y20.41750
G01 X-59.78069 Y20.50226
G01 X-59.78623 Y20.54803
G01 X-59.78689 Y20.54932
G01 X-59.78974 Y20.55493
G01 X-59.82164 Y20.61742
G01 X-59.82601 Y20.62578
G01 X-59.84447 Y20.66078
G01 X-59.86297 Y20.69847
G01 X-59.87107 Y20.72410
G01 X-59.87229 Y20.72826
G01 X-59.88491 Y20.77109
G01 X-59.90109 Y20.83787
G01 X-59.90114 Y20.83827
G01 X-59.91087 Y20.88656
G01 X-59.91920 Y20.92166
G01 X-59.92288 Y20.93660
G01 X-59.92553 Y20.94945
G01 X-59.92553 Y21.52168
G01 X-59.92461 Y21.55813
G01 X-59.92222 Y21.60716
G01 X-59.91491 Y21.68127
G01 X-59.90764 Y21.73029
G01 X-59.89212 Y21.80815
G01 X-59.87986 Y21.85714
G01 X-59.85425 Y21.94132
G01 X-59.83670 Y21.99034
G01 X-59.80693 Y22.06204
G01 X-59.79177 Y22.07721
G01 X-59.75387 Y22.10830
G01 X-59.67401 Y22.16166
G01 X-59.63078 Y22.18478
G01 X-59.54204 Y22.22153
G01 X-59.49515 Y22.23575
G01 X-59.40094 Y22.25450
G01 X-59.35217 Y22.25930
G01 X-59.30414 Y22.26166
G01 X-58.70414 Y22.26166
G01 X-58.65611 Y22.25930
G01 X-58.62718 Y22.25646
G01 X-58.60734 Y22.25450
G01 X-58.51313 Y22.23575
G01 X-58.46622 Y22.22153
G01 X-58.37747 Y22.18478
G01 X-58.33427 Y22.16166
G01 X-58.25438 Y22.10830
G01 X-58.24692 Y22.10218
G01 X-58.22835 Y22.06291
G01 X-58.19142 Y21.97403
G01 X-58.17389 Y21.92501
G01 X-58.14979 Y21.84571
G01 X-58.13752 Y21.79672
G01 X-58.12294 Y21.72372
G01 X-58.11567 Y21.67469
G01 X-58.10955 Y21.61831
G01 X-58.10864 Y21.60492
G01 X-58.10844 Y21.60202
G01 X-58.10780 Y21.59326
G01 X-58.10658 Y21.57861
G01 X-58.10498 Y21.56131
G01 X-58.10473 Y21.55608
G01 X-58.10389 Y21.52168
G01 X-58.10389 Y20.92166
G01 X-58.10473 Y20.88727
G01 X-58.10498 Y20.88211
G01 X-58.10907 Y20.83847
G01 X-58.11133 Y20.81770
G01 X-58.12337 Y20.77094
G01 X-58.13724 Y20.72392
G01 X-58.14234 Y20.70741
G01 X-58.14532 Y20.69839
G01 X-58.16376 Y20.66078
G01 X-58.18667 Y20.61744
G01 X-58.20165 Y20.59052
G01 X-58.22502 Y20.56027
G01 X-58.25606 Y20.52235
G01 X-58.27501 Y20.50015
G01 X-58.30183 Y20.47000
G01 X-58.33371 Y20.43157
G01 X-58.34869 Y20.41221
G01 X-58.35235 Y20.40756
G01 X-58.36274 Y20.35204
G01 X-58.37493 Y20.23063
G01 X-58.37501 Y20.22512
G01 X-58.37508 Y20.21541
G01 X-58.37508 Y18.91262
G01 X-58.36627 Y18.80160
G01 X-58.35657 Y18.74041
G01 X-58.28865 Y18.52169
G01 X-58.26287 Y18.50096
G01 X-58.23168 Y18.47686
G01 X-58.21458 Y18.46332
G01 X-58.16378 Y18.42200
G01 X-58.03930 Y18.33741
G01 X-58.03889 Y18.33716
G01 X-57.95644 Y18.32847
G01 X-57.89525 Y18.32847
G01 X-57.82677 Y18.33477
G01 X-57.82533 Y18.33637
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.03930 Y18.33741 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.03930 Y18.33741
G01 X-58.03140 Y18.32776
G01 X-57.97803 Y18.24790
G01 X-57.90409 Y18.10960
G01 X-57.86734 Y18.02085
G01 X-57.82530 Y17.88230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.55732 Y22.05592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.55732 Y22.05592
G01 X-52.59018 Y22.08290
G01 X-52.67007 Y22.13626
G01 X-52.71327 Y22.15938
G01 X-52.80202 Y22.19613
G01 X-52.84893 Y22.21035
G01 X-52.94223 Y22.22892
G01 X-52.94314 Y22.22910
G01 X-52.99191 Y22.23390
G01 X-53.03994 Y22.23626
G01 X-53.63994 Y22.23626
G01 X-53.68797 Y22.23390
G01 X-53.73674 Y22.22910
G01 X-53.83095 Y22.21035
G01 X-53.87784 Y22.19613
G01 X-53.96658 Y22.15938
G01 X-54.00981 Y22.13626
G01 X-54.08967 Y22.08290
G01 X-54.11733 Y22.06022
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.04930 Y24.71101 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.04930 Y24.71101
G01 X-58.06528 Y24.69328
G01 X-58.11750 Y24.77141
G01 X-58.14859 Y24.80931
G01 X-58.16411 Y24.82483
G01 X-58.16411 Y24.85648
G01 X-58.11837 Y24.81076
G01 X-58.04930 Y24.71101
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.24692 Y22.10218 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.24692 Y22.10218
G01 X-58.24694 Y22.86296
G01 X-58.24133 Y22.93692
G01 X-58.22461 Y23.00918
G01 X-58.20699 Y23.06557
G01 X-58.17958 Y23.13443
G01 X-58.14209 Y23.19839
G01 X-58.04730 Y23.33522
G01 X-58.06472 Y23.35089
G01 X-58.11750 Y23.27192
G01 X-58.14859 Y23.23403
G01 X-58.21651 Y23.16611
G01 X-58.25438 Y23.13502
G01 X-58.33427 Y23.08165
G01 X-58.37747 Y23.05856
G01 X-58.46622 Y23.02178
G01 X-58.51313 Y23.00756
G01 X-58.60734 Y22.98881
G01 X-58.65611 Y22.98401
G01 X-58.70414 Y22.98165
G01 X-59.30414 Y22.98165
G01 X-59.35217 Y22.98401
G01 X-59.40094 Y22.98881
G01 X-59.49515 Y23.00756
G01 X-59.54204 Y23.02178
G01 X-59.63078 Y23.05856
G01 X-59.67401 Y23.08165
G01 X-59.75387 Y23.13502
G01 X-59.79177 Y23.16611
G01 X-59.85969 Y23.23403
G01 X-59.89078 Y23.27192
G01 X-59.94414 Y23.35178
G01 X-59.96012 Y23.38168
G01 X-59.97627 Y23.36374
G01 X-59.96782 Y23.34510
G01 X-59.91178 Y23.26425
G01 X-59.87424 Y23.20019
G01 X-59.84681 Y23.13118
G01 X-59.82921 Y23.07479
G01 X-59.81255 Y23.00263
G01 X-59.80693 Y22.92879
G01 X-59.80693 Y22.06204
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.84412 Y24.82485 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.84412 Y24.82485
G01 X-59.85969 Y24.80931
G01 X-59.89078 Y24.77141
G01 X-59.94414 Y24.69153
G01 X-59.95844 Y24.66483
G01 X-59.97587 Y24.68050
G01 X-59.96782 Y24.69826
G01 X-59.88989 Y24.81073
G01 X-59.84412 Y24.85648
G01 X-59.84412 Y24.82485
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.66335 Y27.11446 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.66335 Y27.11446
G01 X-57.70658 Y27.19533
G01 X-57.74334 Y27.28408
G01 X-57.78888 Y27.43414
G01 X-57.80531 Y27.51690
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.80531 Y27.54029 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.80531 Y27.54029
G01 X-57.80534 Y27.68621
G01 X-57.80534 Y27.83221
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.25182 Y27.82274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.25182 Y27.82274
G01 X-55.24771 Y27.78050
G01 X-55.24771 Y27.68444
G01 X-55.25160 Y27.64479
G01 X-55.25187 Y27.64440
G01 X-55.25492 Y27.64057
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.17992 Y24.79945 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.17992 Y24.79945
G01 X-54.17992 Y24.83110
G01 X-54.22569 Y24.78530
G01 X-54.30362 Y24.67286
G01 X-54.30430 Y24.67133
G01 X-54.28599 Y24.65485
G01 X-54.27994 Y24.66615
G01 X-54.22658 Y24.74604
G01 X-54.19549 Y24.78388
G01 X-54.17992 Y24.79945
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.37456 Y24.66913 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.37456 Y24.66913
G01 X-52.37626 Y24.67286
G01 X-52.45417 Y24.78533
G01 X-52.49991 Y24.83110
G01 X-52.49991 Y24.79945
G01 X-52.48439 Y24.78388
G01 X-52.45330 Y24.74604
G01 X-52.39994 Y24.66615
G01 X-52.39148 Y24.65033
G01 X-52.37456 Y24.66913
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.87215 Y27.11446 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.87215 Y27.11446
G01 X-51.91538 Y27.19533
G01 X-51.95214 Y27.28408
G01 X-51.99768 Y27.43414
G01 X-52.01414 Y27.51690
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.46649 Y27.58266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.46649 Y27.58266
G01 X-49.46581 Y27.58350
G01 X-49.39593 Y27.60277
G01 X-49.29370 Y27.60890
G01 X-49.19243 Y27.59360
G01 X-49.13322 Y27.57824
G01 X-49.03731 Y27.54225
G01 X-48.95097 Y27.48705
G01 X-48.87800 Y27.41520
G01 X-48.83914 Y27.36793
G01 X-48.79512 Y27.30486
G01 X-48.76149 Y27.23572
G01 X-48.75270 Y27.21329
G01 X-48.65453 Y27.04324
G01 X-48.53210 Y26.88975
G01 X-48.43952 Y26.80384
G01 X-48.43952 Y26.83376
G01 X-48.44567 Y26.83879
G01 X-48.51359 Y26.90671
G01 X-48.61308 Y27.02795
G01 X-48.66644 Y27.10783
G01 X-48.74038 Y27.24613
G01 X-48.77714 Y27.33488
G01 X-48.82268 Y27.48494
G01 X-48.84140 Y27.57918
G01 X-48.85679 Y27.73526
G01 X-48.85679 Y27.83130
G01 X-48.84140 Y27.98736
G01 X-48.82268 Y28.08156
G01 X-48.77714 Y28.23165
G01 X-48.74038 Y28.32040
G01 X-48.66644 Y28.45870
G01 X-48.61308 Y28.53856
G01 X-48.51359 Y28.65980
G01 X-48.44567 Y28.72771
G01 X-48.40911 Y28.75771
G01 X-48.40911 Y28.79091
G01 X-48.53210 Y28.67679
G01 X-48.65453 Y28.52330
G01 X-48.75273 Y28.35324
G01 X-48.78260 Y28.27714
G01 X-48.83622 Y28.17674
G01 X-48.86230 Y28.13917
G01 X-48.91965 Y28.07082
G01 X-48.98849 Y28.01400
G01 X-49.06647 Y27.97059
G01 X-49.12242 Y27.94583
G01 X-49.14348 Y27.93905
G01 X-49.21998 Y27.91436
G01 X-49.32194 Y27.90392
G01 X-49.42387 Y27.91489
G01 X-49.47071 Y27.92495
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.41412 Y31.08974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.41412 Y31.08974
G01 X-48.48661 Y31.14884
G01 X-48.55214 Y31.22923
G01 X-48.60017 Y31.32118
G01 X-48.62956 Y31.42387
G01 X-48.63411 Y31.47503
G01 X-48.63411 Y31.57132
G01 X-48.61414 Y31.57132
G01 X-48.61414 Y31.51130
G01 X-48.60472 Y31.41572
G01 X-48.57683 Y31.32380
G01 X-48.53157 Y31.23909
G01 X-48.47061 Y31.16482
G01 X-48.41412 Y31.11846
G01 X-48.41412 Y31.08974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.33267 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.33267 Y31.08090
G01 X-45.34996 Y31.09675
G01 X-45.39043 Y31.13188
G01 X-45.39990 Y31.13965
G01 X-45.43879 Y31.17356
G01 X-45.46081 Y31.19393
G01 X-45.49325 Y31.22225
G01 X-45.50549 Y31.23231
G01 X-45.53709 Y31.25994
G01 X-45.55225 Y31.27414
G01 X-45.58095 Y31.29929
G01 X-45.59416 Y31.31011
G01 X-45.62243 Y31.33495
G01 X-45.63508 Y31.34684
G01 X-45.66231 Y31.37074
G01 X-45.67597 Y31.38196
G01 X-45.70323 Y31.40589
G01 X-45.71572 Y31.41763
G01 X-45.74410 Y31.44254
G01 X-45.75723 Y31.45331
G01 X-45.78601 Y31.47851
G01 X-45.80127 Y31.49278
G01 X-45.83277 Y31.52034
G01 X-45.84511 Y31.53048
G01 X-45.87745 Y31.55872
G01 X-45.89944 Y31.57909
G01 X-45.93836 Y31.61300
G01 X-45.94780 Y31.62077
G01 X-45.98829 Y31.65593
G01 X-46.02418 Y31.68882
G01 X-46.02911 Y31.69332
G01 X-46.07104 Y31.73132
G01 X-46.53414 Y31.73132
G01 X-46.57912 Y31.68633
G01 X-46.61885 Y31.64465
G01 X-46.66772 Y31.59075
G01 X-46.72090 Y31.52616
G01 X-46.73193 Y31.51130
G01 X-46.76147 Y31.47419
G01 X-46.79748 Y31.43213
G01 X-46.83675 Y31.39126
G01 X-46.86881 Y31.36164
G01 X-46.91062 Y31.32763
G01 X-46.94597 Y31.30236
G01 X-46.98273 Y31.27859
G01 X-46.98710 Y31.26637
G01 X-47.00056 Y31.22210
G01 X-47.01405 Y31.16817
G01 X-47.02189 Y31.12880
G01 X-47.02989 Y31.07490
G01 X-47.03353 Y31.03818
G01 X-47.03617 Y30.98425
G01 X-47.03663 Y30.96634
G01 X-47.03663 Y29.71633
G01 X-47.03617 Y29.69840
G01 X-47.03353 Y29.64448
G01 X-47.02989 Y29.60775
G01 X-47.02189 Y29.55385
G01 X-47.01405 Y29.51448
G01 X-47.00056 Y29.46056
G01 X-46.98712 Y29.41633
G01 X-46.96782 Y29.36241
G01 X-46.94651 Y29.31115
G01 X-46.93660 Y29.29020
G01 X-46.93660 Y29.05827
G01 X-46.93594 Y29.03051
G01 X-46.93256 Y28.96190
G01 X-46.92695 Y28.90524
G01 X-46.91679 Y28.83663
G01 X-46.90472 Y28.77618
G01 X-46.88755 Y28.70757
G01 X-46.88166 Y28.68558
G01 X-46.85151 Y28.65339
G01 X-46.80277 Y28.60463
G01 X-46.79771 Y28.59965
G01 X-46.78006 Y28.58238
G01 X-46.75314 Y28.55439
G01 X-46.64768 Y28.43803
G01 X-46.60587 Y28.38708
G01 X-46.51143 Y28.25975
G01 X-46.47051 Y28.19848
G01 X-46.38740 Y28.05977
G01 X-46.34618 Y27.98253
G01 X-46.29911 Y27.88301
G01 X-46.29914 Y27.56772
G01 X-46.31560 Y27.48494
G01 X-46.36114 Y27.33488
G01 X-46.39789 Y27.24613
G01 X-46.47183 Y27.10783
G01 X-46.52520 Y27.02795
G01 X-46.62469 Y26.90671
G01 X-46.69261 Y26.83879
G01 X-46.72911 Y26.80885
G01 X-46.72911 Y26.77565
G01 X-46.60612 Y26.88977
G01 X-46.55545 Y26.95330
G01 X-46.50505 Y27.00753
G01 X-46.48316 Y27.02774
G01 X-46.45669 Y27.04707
G01 X-46.39126 Y27.09475
G01 X-46.28641 Y27.13874
G01 X-46.22764 Y27.15571
G01 X-46.16157 Y27.16749
G01 X-46.15715 Y27.16526
G01 X-46.08621 Y27.12929
G01 X-46.00772 Y27.08162
G01 X-45.95969 Y27.05012
G01 X-45.90788 Y27.01349
G01 X-45.87425 Y26.98830
G01 X-45.81715 Y26.94296
G01 X-45.69647 Y26.84649
G01 X-45.65929 Y26.81873
G01 X-45.63952 Y26.80773
G01 X-45.50140 Y26.73341
G01 X-45.49185 Y26.72835
G01 X-45.43719 Y26.70814
G01 X-45.31166 Y26.66757
G01 X-45.28735 Y26.66188
G01 X-45.21959 Y26.64949
G01 X-45.12413 Y26.63684
G01 X-45.06353 Y26.63389
G01 X-44.99472 Y26.63389
G01 X-44.93412 Y26.63684
G01 X-44.83866 Y26.64949
G01 X-44.77090 Y26.66188
G01 X-44.74659 Y26.66757
G01 X-44.62106 Y26.70814
G01 X-44.56643 Y26.72835
G01 X-44.55685 Y26.73341
G01 X-44.50049 Y26.76371
G01 X-44.41872 Y26.80773
G01 X-44.39896 Y26.81875
G01 X-44.36178 Y26.84649
G01 X-44.24943 Y26.93628
G01 X-44.23993 Y26.94527
G01 X-44.19221 Y26.99500
G01 X-44.12124 Y27.07664
G01 X-44.09238 Y27.11598
G01 X-44.05446 Y27.17336
G01 X-44.01748 Y27.23580
G01 X-43.98060 Y27.31174
G01 X-43.95357 Y27.37509
G01 X-43.94080 Y27.40966
G01 X-43.90864 Y27.52533
G01 X-43.89343 Y27.59264
G01 X-43.89322 Y27.59376
G01 X-43.87918 Y27.74882
G01 X-43.87692 Y27.78329
G01 X-43.87918 Y27.81773
G01 X-43.89325 Y27.97285
G01 X-43.89343 Y27.97392
G01 X-43.90862 Y28.04120
G01 X-43.93597 Y28.13958
G01 X-43.94077 Y28.15682
G01 X-43.95357 Y28.19144
G01 X-43.98060 Y28.25484
G01 X-44.01748 Y28.33076
G01 X-44.05446 Y28.39320
G01 X-44.09238 Y28.45060
G01 X-44.12124 Y28.48995
G01 X-44.19221 Y28.57156
G01 X-44.23993 Y28.62134
G01 X-44.24946 Y28.63028
G01 X-44.36178 Y28.72010
G01 X-44.39894 Y28.74781
G01 X-44.41877 Y28.75888
G01 X-44.55687 Y28.83315
G01 X-44.56640 Y28.83818
G01 X-44.62101 Y28.85837
G01 X-44.74659 Y28.89899
G01 X-44.77084 Y28.90465
G01 X-44.83866 Y28.91707
G01 X-44.93412 Y28.92975
G01 X-44.99472 Y28.93269
G01 X-45.00297 Y28.93305
G01 X-45.03051 Y28.93406
G01 X-45.04605 Y28.93447
G01 X-45.06373 Y28.93478
G01 X-45.16797 Y28.94387
G01 X-45.18593 Y28.95654
G01 X-45.23605 Y28.99294
G01 X-45.31964 Y29.06411
G01 X-45.32274 Y29.06719
G01 X-45.37498 Y29.12538
G01 X-45.40191 Y29.15896
G01 X-45.49505 Y29.30765
G01 X-45.49375 Y29.31197
G01 X-45.48580 Y29.33828
G01 X-45.47249 Y29.38817
G01 X-45.46973 Y29.40008
G01 X-45.45875 Y29.44196
G01 X-45.43899 Y29.50917
G01 X-45.43884 Y29.50968
G01 X-45.42375 Y29.56089
G01 X-45.41166 Y29.60790
G01 X-45.40945 Y29.62822
G01 X-45.40506 Y29.67531
G01 X-45.40473 Y29.68192
G01 X-45.40389 Y29.71633
G01 X-45.40389 Y30.71181
G01 X-45.40170 Y30.76700
G01 X-45.39927 Y30.79799
G01 X-45.36592 Y30.96634
G01 X-45.36421 Y30.97170
G01 X-45.35421 Y31.00571
G01 X-45.34641 Y31.03439
G01 X-45.33861 Y31.06142
G01 X-45.33267 Y31.08090
G01 X-45.30915 Y31.09058
G01 X-45.12685 Y31.14257
G01 X-45.06566 Y31.15227
G01 X-44.95464 Y31.16106
G01 X-44.75911 Y31.16106
G01 X-44.72472 Y31.16192
G01 X-44.71811 Y31.16225
G01 X-44.67102 Y31.16665
G01 X-44.65073 Y31.16886
G01 X-44.61471 Y31.17780
G01 X-44.60353 Y31.18100
G01 X-44.55182 Y31.19626
G01 X-44.52660 Y31.20421
G01 X-44.48860 Y31.22283
G01 X-44.44092 Y31.24803
G01 X-44.41418 Y31.26291
G01 X-44.38372 Y31.28646
G01 X-44.34199 Y31.32060
G01 X-44.31588 Y31.34308
G01 X-44.29338 Y31.36924
G01 X-44.25924 Y31.41095
G01 X-44.23572 Y31.44137
G01 X-44.22088 Y31.46799
G01 X-44.19569 Y31.51567
G01 X-44.18431 Y31.53820
G01 X-44.17702 Y31.55377
G01 X-44.16902 Y31.57917
G01 X-44.15378 Y31.63088
G01 X-44.14166 Y31.67792
G01 X-44.13945 Y31.69822
G01 X-44.13506 Y31.74534
G01 X-44.13473 Y31.75192
G01 X-44.13386 Y31.78633
G01 X-44.13386 Y33.03634
G01 X-44.13473 Y33.07073
G01 X-44.13506 Y33.07734
G01 X-44.13945 Y33.12443
G01 X-44.14166 Y33.14472
G01 X-44.15378 Y33.19176
G01 X-44.16902 Y33.24348
G01 X-44.17702 Y33.26885
G01 X-44.19571 Y33.30698
G01 X-44.22088 Y33.35466
G01 X-44.23572 Y33.38127
G01 X-44.25919 Y33.41163
G01 X-44.29332 Y33.45336
G01 X-44.30511 Y33.46741
G01 X-44.33866 Y33.50632
G01 X-44.33902 Y33.50672
G01 X-44.34567 Y33.51445
G01 X-44.34913 Y33.52242
G01 X-44.35324 Y33.53172
G01 X-44.37234 Y33.57952
G01 X-44.37478 Y33.58633
G01 X-44.40112 Y33.64990
G01 X-44.41580 Y33.68094
G01 X-44.43346 Y33.71041
G01 X-44.47173 Y33.76768
G01 X-44.49218 Y33.79527
G01 X-44.51527 Y33.82075
G01 X-44.53897 Y33.84564
G01 X-44.70745 Y34.01412
G01 X-44.76254 Y34.07614
G01 X-44.79137 Y34.11267
G01 X-44.90059 Y34.30116
G01 X-44.92594 Y34.36237
G01 X-44.95411 Y34.45841
G01 X-44.95934 Y34.47622
G01 X-44.93158 Y34.56166
G01 X-44.88555 Y34.64127
G01 X-44.87572 Y34.64701
G01 X-44.81453 Y34.67817
G01 X-44.56185 Y34.76255
G01 X-44.50066 Y34.77223
G01 X-44.38979 Y34.78102
G01 X-44.27491 Y34.78102
G01 X-44.23427 Y34.78219
G01 X-44.21677 Y34.78424
G01 X-44.13066 Y34.81071
G01 X-44.05815 Y34.85455
G01 X-43.99823 Y34.91444
G01 X-43.99406 Y34.92054
G01 X-43.95436 Y34.98701
G01 X-43.92789 Y35.07314
G01 X-43.92584 Y35.09062
G01 X-43.92467 Y35.13126
G01 X-43.92467 Y36.73128
G01 X-43.92584 Y36.77192
G01 X-43.92789 Y36.78942
G01 X-43.95436 Y36.87555
G01 X-43.99820 Y36.94807
G01 X-44.05812 Y37.00799
G01 X-44.13066 Y37.05185
G01 X-44.21674 Y37.07830
G01 X-44.23422 Y37.08033
G01 X-44.27491 Y37.08152
G01 X-44.95731 Y37.08152
G01 X-44.98486 Y37.08205
G01 X-45.00038 Y37.08266
G01 X-45.13528 Y37.10095
G01 X-45.14016 Y37.10446
G01 X-45.19030 Y37.14088
G01 X-45.27496 Y37.21312
G01 X-48.53672 Y40.47488
G01 X-48.57409 Y40.51530
G01 X-48.59426 Y40.53889
G01 X-48.69238 Y40.68659
G01 X-48.72047 Y40.74174
G01 X-48.72054 Y40.74410
G01 X-48.71872 Y40.82754
G01 X-48.71661 Y40.85619
G01 X-48.64533 Y40.97549
G01 X-48.60891 Y41.02561
G01 X-48.53672 Y41.11021
G01 X-44.34077 Y45.30619
G01 X-44.31705 Y45.33109
G01 X-44.29398 Y45.35656
G01 X-44.27351 Y45.38412
G01 X-44.23523 Y45.44140
G01 X-44.21761 Y45.47084
G01 X-44.20290 Y45.50190
G01 X-44.17659 Y45.56550
G01 X-44.16503 Y45.59781
G01 X-44.15667 Y45.63116
G01 X-44.14324 Y45.69860
G01 X-44.13821 Y45.73261
G01 X-44.13650 Y45.76687
G01 X-44.13567 Y45.80132
G01 X-44.13567 Y52.76419
G01 X-44.13079 Y52.84692
G01 X-44.12533 Y52.89315
G01 X-44.06922 Y53.10389
G01 X-44.04385 Y53.16508
G01 X-43.99594 Y53.25279
G01 X-43.99592 Y53.25279
G01 X-43.98705 Y53.26907
G01 X-43.90694 Y53.30986
G01 X-43.81814 Y53.33361
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-43.99592 Y53.25279 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-43.99592 Y53.25279
G01 X-43.99589 Y53.51321
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.52590 Y54.94854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.52590 Y54.94854
G01 X-48.52590 Y55.20785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.52588 Y57.43906 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.52588 Y57.43906
G01 X-48.63002 Y57.49471
G01 X-48.71874 Y57.53147
G01 X-48.84767 Y57.57058
G01 X-48.86883 Y57.57698
G01 X-48.96304 Y57.59573
G01 X-49.11912 Y57.61110
G01 X-49.21516 Y57.61110
G01 X-49.26217 Y57.60647
G01 X-49.28605 Y57.63035
G01 X-49.26530 Y57.63347
G01 X-49.06896 Y57.63347
G01 X-48.92319 Y57.61150
G01 X-48.84655 Y57.60607
G01 X-48.77002 Y57.61265
G01 X-48.70967 Y57.62265
G01 X-48.61089 Y57.64988
G01 X-48.53733 Y57.68806
G01 X-48.52590 Y57.70840
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.01169 Y56.94724 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.01169 Y56.94724
G01 X-43.98850 Y56.94564
G01 X-43.88370 Y56.94379
G01 X-43.80095 Y56.94681
G01 X-43.74456 Y56.95092
G01 X-43.69701 Y56.95618
G01 X-43.64240 Y56.96434
G01 X-43.61240 Y56.97000
G01 X-43.57438 Y56.97610
G01 X-43.47890 Y56.98877
G01 X-43.41832 Y56.99174
G01 X-43.34951 Y56.99174
G01 X-43.28893 Y56.98877
G01 X-43.19348 Y56.97610
G01 X-43.12569 Y56.96370
G01 X-43.10140 Y56.95801
G01 X-42.97583 Y56.91742
G01 X-42.92119 Y56.89723
G01 X-42.91167 Y56.89220
G01 X-42.77357 Y56.81793
G01 X-42.75375 Y56.80686
G01 X-42.71657 Y56.77912
G01 X-42.60422 Y56.68930
G01 X-42.59472 Y56.68034
G01 X-42.54700 Y56.63061
G01 X-42.44408 Y56.51219
G01 X-42.39574 Y56.45895
G01 X-42.38147 Y56.44173
G01 X-42.28266 Y56.34204
G01 X-42.21027 Y56.28034
G01 X-42.17291 Y56.24988
G01 X-42.16064 Y56.24031
G01 X-42.11223 Y56.23792
G01 X-42.06714 Y56.24041
G01 X-42.01657 Y56.27996
G01 X-41.94527 Y56.34214
G01 X-41.87880 Y56.40688
G01 X-41.83615 Y56.45347
G01 X-41.83115 Y56.45895
G01 X-41.78352 Y56.51199
G01 X-41.76021 Y56.53932
G01 X-41.68083 Y56.63061
G01 X-41.66265 Y56.65072
G01 X-41.63392 Y56.68130
G01 X-41.58769 Y56.73561
G01 X-41.56755 Y56.76177
G01 X-41.56120 Y56.79078
G01 X-41.54479 Y56.92362
G01 X-41.54446 Y56.93505
G01 X-41.54416 Y56.95527
G01 X-41.54416 Y58.35450
G01 X-41.55294 Y58.46543
G01 X-41.56262 Y58.52659
G01 X-41.56691 Y58.55097
G01 X-41.64047 Y58.63698
G01 X-41.64342 Y58.63992
G01 X-41.64857 Y58.64510
G01 X-41.66216 Y58.65900
G01 X-41.67969 Y58.67752
G01 X-41.69084 Y58.69004
G01 X-41.76181 Y58.77170
G01 X-41.79066 Y58.81102
G01 X-41.82858 Y58.86840
G01 X-41.86559 Y58.93085
G01 X-41.90245 Y59.00675
G01 X-41.92947 Y59.07012
G01 X-41.94225 Y59.10469
G01 X-41.97443 Y59.22039
G01 X-41.98962 Y59.28770
G01 X-41.98980 Y59.28877
G01 X-42.00387 Y59.44386
G01 X-42.00613 Y59.47833
G01 X-42.00387 Y59.51277
G01 X-41.98980 Y59.66789
G01 X-41.98962 Y59.66895
G01 X-41.97443 Y59.73626
G01 X-41.94225 Y59.85196
G01 X-41.92947 Y59.88650
G01 X-41.90247 Y59.94985
G01 X-41.86559 Y60.02580
G01 X-41.82861 Y60.08823
G01 X-41.79066 Y60.14564
G01 X-41.76181 Y60.18495
G01 X-41.69084 Y60.26662
G01 X-41.64306 Y60.31637
G01 X-41.63361 Y60.32531
G01 X-41.52124 Y60.41513
G01 X-41.48406 Y60.44287
G01 X-41.46432 Y60.45392
G01 X-41.32622 Y60.52818
G01 X-41.31667 Y60.53324
G01 X-41.26199 Y60.55346
G01 X-41.13646 Y60.59402
G01 X-41.11215 Y60.59971
G01 X-41.04444 Y60.61208
G01 X-40.94893 Y60.62476
G01 X-40.88838 Y60.62773
G01 X-40.88007 Y60.62808
G01 X-40.81921 Y60.63037
G01 X-40.76796 Y60.63410
G01 X-40.71535 Y60.63982
G01 X-40.70712 Y60.64487
G01 X-40.59369 Y60.73050
G01 X-40.58228 Y60.74104
G01 X-40.56239 Y60.76016
G01 X-38.42506 Y62.89750
G01 X-38.40017 Y62.92119
G01 X-38.37469 Y62.94428
G01 X-38.34713 Y62.96473
G01 X-38.28983 Y63.00301
G01 X-38.26042 Y63.02064
G01 X-38.22933 Y63.03534
G01 X-38.16575 Y63.06168
G01 X-38.15679 Y63.06488
G01 X-38.10179 Y63.08718
G01 X-38.05209 Y63.10982
G01 X-38.03487 Y63.11741
G01 X-37.99324 Y63.13514
G01 X-37.96875 Y63.14606
G01 X-37.92991 Y63.16410
G01 X-37.80294 Y63.24233
G01 X-37.52130 Y63.24233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.92991 Y63.16410 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.92991 Y63.16410
G01 X-37.80291 Y63.24233
G01 X-37.79158 Y63.24931
G01 X-37.76837 Y63.31489
G01 X-37.75663 Y63.36371
G01 X-37.75785 Y63.36669
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-36.56649 Y63.24235 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-36.56649 Y63.24235
G01 X-36.50680 Y63.26707
G01 X-36.36850 Y63.34101
G01 X-36.28862 Y63.39437
G01 X-36.16741 Y63.49386
G01 X-36.09949 Y63.56178
G01 X-36.00000 Y63.68299
G01 X-35.94663 Y63.76287
G01 X-35.87269 Y63.90118
G01 X-35.83594 Y63.98993
G01 X-35.79042 Y64.13999
G01 X-35.77168 Y64.23422
G01 X-35.75631 Y64.39028
G01 X-35.75631 Y64.48634
G01 X-35.77168 Y64.64243
G01 X-35.79042 Y64.73663
G01 X-35.83594 Y64.88670
G01 X-35.87269 Y64.97545
G01 X-35.94663 Y65.11375
G01 X-36.00000 Y65.19363
G01 X-36.09949 Y65.31484
G01 X-36.16741 Y65.38279
G01 X-36.28862 Y65.48225
G01 X-36.36850 Y65.53564
G01 X-36.50680 Y65.60956
G01 X-36.59555 Y65.64631
G01 X-36.74564 Y65.69185
G01 X-36.83985 Y65.71057
G01 X-36.94711 Y65.72114
G01 X-36.99590 Y65.72596
G01 X-37.09197 Y65.72596
G01 X-37.13898 Y65.72132
G01 X-37.86695 Y66.44925
G01 X-37.86690 Y67.29335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-39.47517 Y65.76711 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-39.47517 Y65.76711
G01 X-39.49920 Y65.82513
G01 X-39.51911 Y65.89079
G01 X-39.53786 Y65.98499
G01 X-39.54457 Y66.05329
G01 X-39.54693 Y66.10130
G01 X-39.54693 Y70.27137
G01 X-39.86633 Y70.59078
G01 X-40.54388 Y71.26835
G01 X-40.59897 Y71.26835
G01 X-40.62897 Y71.23177
G01 X-40.69689 Y71.16385
G01 X-40.81812 Y71.06436
G01 X-40.89800 Y71.01099
G01 X-41.03631 Y70.93708
G01 X-41.12506 Y70.90030
G01 X-41.26336 Y70.85834
G01 X-41.26351 Y70.85831
G01 X-41.27565 Y70.85654
G01 X-41.37034 Y70.84719
G01 X-41.52719 Y70.83947
G01 X-41.61967 Y70.83947
G01 X-41.77649 Y70.84719
G01 X-41.87115 Y70.85654
G01 X-41.88355 Y70.85836
G01 X-42.02183 Y70.90030
G01 X-42.11058 Y70.93708
G01 X-42.19950 Y70.98460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.23676 Y70.85831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.23676 Y70.85831
G01 X-41.88322 Y70.85831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.27565 Y70.85654 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.27565 Y70.85654
G01 X-41.26361 Y70.85831
G01 X-40.77344 Y70.85831
G01 X-40.67784 Y70.84889
G01 X-40.58591 Y70.82100
G01 X-40.50121 Y70.77574
G01 X-40.42696 Y70.71480
G01 X-40.36603 Y70.64053
G01 X-40.32074 Y70.55583
G01 X-40.29285 Y70.46390
G01 X-40.28343 Y70.36832
G01 X-40.28343 Y69.46629
G01 X-40.25996 Y69.44280
G01 X-40.22765 Y69.40716
G01 X-40.18414 Y69.35413
G01 X-40.13077 Y69.27427
G01 X-40.09841 Y69.21377
G01 X-40.06166 Y69.12502
G01 X-40.04175 Y69.05936
G01 X-40.02300 Y68.96515
G01 X-40.01629 Y68.89685
G01 X-40.01393 Y68.84882
G01 X-40.01393 Y65.45274
G01 X-39.97741 Y65.42276
G01 X-39.96201 Y65.40737
G01 X-39.94281 Y65.32749
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.62588 Y65.37522 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.62588 Y65.37522
G01 X-46.34242 Y64.69084
G01 X-46.33475 Y64.67098
G01 X-46.31019 Y64.60237
G01 X-46.30010 Y64.56917
G01 X-46.28291 Y64.50057
G01 X-46.27727 Y64.47232
G01 X-46.26711 Y64.40372
G01 X-46.26459 Y64.37824
G01 X-46.26121 Y64.30961
G01 X-46.26091 Y64.29732
G01 X-46.26091 Y46.58831
G01 X-46.26121 Y46.57602
G01 X-46.26459 Y46.50741
G01 X-46.26711 Y46.48196
G01 X-46.27727 Y46.41335
G01 X-46.27971 Y46.39938
G01 X-46.28788 Y46.38775
G01 X-46.32919 Y46.33205
G01 X-46.34544 Y46.31224
G01 X-46.39157 Y46.26133
G01 X-46.40005 Y46.25247
G01 X-48.31140 Y44.34112
G01 X-48.32029 Y44.33266
G01 X-48.37117 Y44.28651
G01 X-48.39098 Y44.27028
G01 X-48.44668 Y44.22895
G01 X-48.45829 Y44.22078
G01 X-48.47228 Y44.21836
G01 X-48.54092 Y44.20818
G01 X-48.56637 Y44.20566
G01 X-48.63500 Y44.20228
G01 X-48.64729 Y44.20200
G01 X-49.59913 Y44.20200
G01 X-49.61140 Y44.20170
G01 X-49.68003 Y44.19832
G01 X-49.70545 Y44.19581
G01 X-49.77409 Y44.18562
G01 X-49.80233 Y44.17998
G01 X-49.87094 Y44.16281
G01 X-49.90413 Y44.15273
G01 X-49.97274 Y44.12817
G01 X-49.99260 Y44.12050
G01 X-50.67706 Y43.83698
G01 X-52.36407 Y42.14996
G01 X-52.41111 Y42.15461
G01 X-52.50718 Y42.15461
G01 X-52.52534 Y42.15283
G01 X-52.65836 Y42.08992
G01 X-52.73562 Y42.04869
G01 X-52.87431 Y41.96559
G01 X-52.93560 Y41.92467
G01 X-53.06293 Y41.83020
G01 X-53.11388 Y41.78842
G01 X-53.23024 Y41.68296
G01 X-53.27512 Y41.63808
G01 X-53.38058 Y41.52172
G01 X-53.42241 Y41.47074
G01 X-53.51683 Y41.34339
G01 X-53.55767 Y41.28220
G01 X-53.64080 Y41.14354
G01 X-53.68208 Y41.06620
G01 X-53.72912 Y40.96670
G01 X-53.72914 Y40.91324
G01 X-53.72914 Y40.65144
G01 X-53.74560 Y40.56866
G01 X-53.79112 Y40.41857
G01 X-53.82790 Y40.32983
G01 X-53.90181 Y40.19152
G01 X-53.95518 Y40.11166
G01 X-54.05467 Y39.99043
G01 X-54.12259 Y39.92251
G01 X-54.24383 Y39.82302
G01 X-54.32371 Y39.76965
G01 X-54.39493 Y39.73158
G01 X-54.39493 Y36.90570
G01 X-54.35840 Y36.87573
G01 X-54.29048 Y36.80781
G01 X-54.20992 Y36.70964
G01 X-54.19099 Y36.68658
G01 X-54.13763 Y36.60669
G01 X-54.06369 Y36.46839
G01 X-54.02693 Y36.37964
G01 X-53.98142 Y36.22958
G01 X-53.96493 Y36.14667
G01 X-53.96493 Y35.71566
G01 X-53.94847 Y35.63296
G01 X-53.91822 Y35.53329
G01 X-53.90573 Y35.52354
G01 X-53.86867 Y35.49331
G01 X-53.79615 Y35.43154
G01 X-53.69737 Y35.33187
G01 X-53.68309 Y35.31465
G01 X-53.68279 Y35.31429
G01 X-53.63476 Y35.26141
G01 X-53.61439 Y35.23794
G01 X-53.53184 Y35.14299
G01 X-53.48411 Y35.09326
G01 X-53.47464 Y35.08429
G01 X-53.36227 Y34.99448
G01 X-53.32508 Y34.96674
G01 X-53.30527 Y34.95567
G01 X-53.16717 Y34.88140
G01 X-53.15767 Y34.87637
G01 X-53.10303 Y34.85618
G01 X-52.97741 Y34.81556
G01 X-52.97060 Y34.81396
G01 X-52.95328 Y34.80967
G01 X-52.91871 Y34.80065
G01 X-52.88927 Y34.79362
G01 X-52.88584 Y34.79288
G01 X-52.73324 Y34.74208
G01 X-52.72018 Y34.73619
G01 X-52.65866 Y34.71114
G01 X-52.65335 Y34.70919
G01 X-52.58759 Y34.68247
G01 X-52.49544 Y34.54386
G01 X-51.61193 Y33.66034
G01 X-51.61193 Y33.54985
G01 X-51.62016 Y33.54162
G01 X-51.65437 Y33.49994
G01 X-51.70774 Y33.42009
G01 X-51.73314 Y33.37254
G01 X-51.76992 Y33.28379
G01 X-51.78556 Y33.23220
G01 X-51.80428 Y33.13799
G01 X-51.80957 Y33.08435
G01 X-51.81193 Y33.03632
G01 X-51.81193 Y31.78631
G01 X-51.80957 Y31.73828
G01 X-51.80885 Y31.73132
G01 X-51.76694 Y31.69332
G01 X-51.76199 Y31.68882
G01 X-51.72610 Y31.65593
G01 X-51.68561 Y31.62077
G01 X-51.67616 Y31.61300
G01 X-51.63725 Y31.57909
G01 X-51.61526 Y31.55872
G01 X-51.58279 Y31.53040
G01 X-51.57058 Y31.52037
G01 X-51.53898 Y31.49268
G01 X-51.52382 Y31.47851
G01 X-51.49509 Y31.45336
G01 X-51.48191 Y31.44254
G01 X-51.45361 Y31.41770
G01 X-51.44104 Y31.40589
G01 X-51.41373 Y31.38191
G01 X-51.40012 Y31.37074
G01 X-51.37281 Y31.34676
G01 X-51.36024 Y31.33495
G01 X-51.33194 Y31.31011
G01 X-51.31876 Y31.29929
G01 X-51.29003 Y31.27414
G01 X-51.27487 Y31.25997
G01 X-51.24327 Y31.23228
G01 X-51.23105 Y31.22225
G01 X-51.19859 Y31.19393
G01 X-51.17660 Y31.17356
G01 X-51.13768 Y31.13965
G01 X-51.12824 Y31.13188
G01 X-51.08775 Y31.09672
G01 X-51.07048 Y31.08090
G01 X-51.07642 Y31.06142
G01 X-51.08427 Y31.03426
G01 X-51.09202 Y31.00571
G01 X-51.10205 Y30.97158
G01 X-51.10370 Y30.96634
G01 X-51.13705 Y30.79799
G01 X-51.13949 Y30.76700
G01 X-51.14167 Y30.71181
G01 X-51.14167 Y29.71633
G01 X-51.14251 Y29.68192
G01 X-51.14284 Y29.67536
G01 X-51.14647 Y29.63650
G01 X-51.14726 Y29.62822
G01 X-51.14947 Y29.60793
G01 X-51.16156 Y29.56089
G01 X-51.17680 Y29.50917
G01 X-51.18340 Y29.48804
G01 X-51.19826 Y29.44288
G01 X-51.21353 Y29.38989
G01 X-51.21642 Y29.37821
G01 X-51.23451 Y29.31636
G01 X-51.23502 Y29.31484
G01 X-51.24218 Y29.29243
G01 X-51.14599 Y29.13721
G01 X-51.11902 Y29.10361
G01 X-51.06776 Y29.04643
G01 X-51.03565 Y29.01433
G01 X-50.95094 Y28.94204
G01 X-50.90083 Y28.90564
G01 X-50.88297 Y28.89307
G01 X-50.77873 Y28.88395
G01 X-50.76105 Y28.88367
G01 X-50.74551 Y28.88329
G01 X-50.71800 Y28.88225
G01 X-50.70972 Y28.88189
G01 X-50.64914 Y28.87892
G01 X-50.55366 Y28.86625
G01 X-50.48584 Y28.85385
G01 X-50.46159 Y28.84816
G01 X-50.33601 Y28.80760
G01 X-50.28137 Y28.78740
G01 X-50.27187 Y28.78235
G01 X-50.13377 Y28.70808
G01 X-50.11394 Y28.69703
G01 X-50.07678 Y28.66927
G01 X-49.96441 Y28.57946
G01 X-49.95493 Y28.57051
G01 X-49.90721 Y28.52078
G01 X-49.83624 Y28.43915
G01 X-49.80738 Y28.39980
G01 X-49.76944 Y28.34242
G01 X-49.72341 Y28.26472
G01 X-49.68798 Y28.20811
G01 X-49.66377 Y28.17321
G01 X-49.65590 Y28.16013
G01 X-49.64808 Y28.14687
G01 X-49.54940 Y28.01291
G01 X-49.48148 Y27.93704
G01 X-49.48031 Y27.93572
G01 X-49.47071 Y27.92495
G01 X-49.45651 Y27.78050
G01 X-49.45651 Y27.68444
G01 X-49.46649 Y27.58266
G01 X-49.46652 Y27.58266
G01 X-49.48793 Y27.55789
G01 X-49.50759 Y27.53191
G01 X-49.53152 Y27.50143
G01 X-49.56743 Y27.45751
G01 X-49.65793 Y27.32106
G01 X-49.66093 Y27.31530
G01 X-49.68371 Y27.27478
G01 X-49.69296 Y27.25949
G01 X-49.72412 Y27.20217
G01 X-49.73248 Y27.18497
G01 X-49.76946 Y27.12259
G01 X-49.80738 Y27.06516
G01 X-49.83624 Y27.02586
G01 X-49.90721 Y26.94420
G01 X-49.95493 Y26.89447
G01 X-49.96443 Y26.88550
G01 X-50.07678 Y26.79571
G01 X-50.11396 Y26.76795
G01 X-50.13372 Y26.75690
G01 X-50.21465 Y26.71337
G01 X-50.27185 Y26.68263
G01 X-50.28140 Y26.67755
G01 X-50.33606 Y26.65734
G01 X-50.46159 Y26.61680
G01 X-50.48590 Y26.61108
G01 X-50.55366 Y26.59871
G01 X-50.64912 Y26.58604
G01 X-50.70972 Y26.58307
G01 X-50.77853 Y26.58307
G01 X-50.83913 Y26.58604
G01 X-50.93459 Y26.59871
G01 X-51.00235 Y26.61108
G01 X-51.02666 Y26.61680
G01 X-51.15219 Y26.65734
G01 X-51.20682 Y26.67755
G01 X-51.21640 Y26.68263
G01 X-51.35452 Y26.75690
G01 X-51.37429 Y26.76795
G01 X-51.41147 Y26.79571
G01 X-51.53217 Y26.89218
G01 X-51.53400 Y26.89363
G01 X-51.58925 Y26.93747
G01 X-51.62288 Y26.96269
G01 X-51.67469 Y26.99930
G01 X-51.72272 Y27.03082
G01 X-51.80121 Y27.07852
G01 X-51.87215 Y27.11446
G01 X-51.87657 Y27.11669
G01 X-51.94264 Y27.10491
G01 X-52.00141 Y27.08794
G01 X-52.10626 Y27.04395
G01 X-52.17169 Y26.99625
G01 X-52.19816 Y26.97694
G01 X-52.22005 Y26.95670
G01 X-52.27045 Y26.90250
G01 X-52.32112 Y26.83897
G01 X-52.44411 Y26.72485
G01 X-52.44411 Y26.75805
G01 X-52.40761 Y26.78802
G01 X-52.33969 Y26.85591
G01 X-52.24020 Y26.97717
G01 X-52.18683 Y27.05706
G01 X-52.11289 Y27.19533
G01 X-52.07614 Y27.28408
G01 X-52.03060 Y27.43414
G01 X-52.01414 Y27.51690
G01 X-52.01414 Y27.83221
G01 X-52.06118 Y27.93170
G01 X-52.10240 Y28.00900
G01 X-52.18551 Y28.14766
G01 X-52.22643 Y28.20897
G01 X-52.32089 Y28.33630
G01 X-52.36268 Y28.38723
G01 X-52.46814 Y28.50359
G01 X-52.51302 Y28.54847
G01 X-52.51863 Y28.55357
G01 X-52.54180 Y28.57565
G01 X-52.59056 Y28.62439
G01 X-52.59945 Y28.63343
G01 X-52.61467 Y28.68527
G01 X-52.63186 Y28.75388
G01 X-52.64345 Y28.81197
G01 X-52.65361 Y28.88057
G01 X-52.65899 Y28.93500
G01 X-52.66237 Y29.00361
G01 X-52.66303 Y29.03025
G01 X-52.66303 Y29.29563
G01 X-52.67543 Y29.32185
G01 X-52.69572 Y29.37067
G01 X-52.71500 Y29.42456
G01 X-52.72765 Y29.46617
G01 X-52.74116 Y29.52009
G01 X-52.74855 Y29.55723
G01 X-52.75655 Y29.61115
G01 X-52.75996 Y29.64559
G01 X-52.76260 Y29.69952
G01 X-52.76303 Y29.71633
G01 X-52.76303 Y30.96634
G01 X-52.76260 Y30.98313
G01 X-52.75996 Y31.03706
G01 X-52.75655 Y31.07150
G01 X-52.74855 Y31.12542
G01 X-52.74116 Y31.16256
G01 X-52.72765 Y31.21648
G01 X-52.71497 Y31.25814
G01 X-52.70405 Y31.28864
G01 X-52.68383 Y31.30231
G01 X-52.64837 Y31.32766
G01 X-52.60654 Y31.36170
G01 X-52.57456 Y31.39126
G01 X-52.53527 Y31.43215
G01 X-52.49925 Y31.47419
G01 X-52.46974 Y31.51130
G01 X-52.45871 Y31.52619
G01 X-52.40550 Y31.59078
G01 X-52.35663 Y31.64468
G01 X-52.31690 Y31.68636
G01 X-52.27195 Y31.73132
G01 X-51.80885 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.07048 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.07048 Y31.08090
G01 X-51.04693 Y31.09060
G01 X-50.86466 Y31.14257
G01 X-50.80347 Y31.15227
G01 X-50.69245 Y31.16106
G01 X-50.49692 Y31.16106
G01 X-50.46253 Y31.16192
G01 X-50.45592 Y31.16225
G01 X-50.40883 Y31.16665
G01 X-50.38849 Y31.16886
G01 X-50.35252 Y31.17780
G01 X-50.34134 Y31.18100
G01 X-50.28963 Y31.19626
G01 X-50.26441 Y31.20421
G01 X-50.22641 Y31.22283
G01 X-50.17873 Y31.24803
G01 X-50.15196 Y31.26291
G01 X-50.12153 Y31.28646
G01 X-50.07980 Y31.32060
G01 X-50.05369 Y31.34305
G01 X-50.03118 Y31.36924
G01 X-49.99705 Y31.41095
G01 X-49.97353 Y31.44137
G01 X-49.95869 Y31.46799
G01 X-49.93350 Y31.51567
G01 X-49.92207 Y31.53833
G01 X-49.91483 Y31.55374
G01 X-49.90683 Y31.57917
G01 X-49.89159 Y31.63088
G01 X-49.87944 Y31.67795
G01 X-49.87726 Y31.69822
G01 X-49.87284 Y31.74536
G01 X-49.87251 Y31.75192
G01 X-49.87167 Y31.78633
G01 X-49.87167 Y33.03634
G01 X-49.87251 Y33.07073
G01 X-49.87284 Y33.07731
G01 X-49.87726 Y33.12443
G01 X-49.87944 Y33.14470
G01 X-49.89156 Y33.19176
G01 X-49.90680 Y33.24348
G01 X-49.91480 Y33.26885
G01 X-49.93350 Y33.30698
G01 X-49.95869 Y33.35466
G01 X-49.97355 Y33.38135
G01 X-49.97729 Y33.38651
G01 X-49.98056 Y33.39095
G01 X-49.99623 Y33.41224
G01 X-50.02666 Y33.45702
G01 X-50.04937 Y33.49331
G01 X-50.05476 Y33.50182
G01 X-50.06288 Y33.55326
G01 X-50.07167 Y33.66413
G01 X-50.07167 Y34.00827
G01 X-50.07251 Y34.04272
G01 X-50.07421 Y34.07698
G01 X-50.07927 Y34.11102
G01 X-50.09268 Y34.17848
G01 X-50.10101 Y34.21178
G01 X-50.10655 Y34.22722
G01 X-50.11239 Y34.24421
G01 X-50.12748 Y34.29011
G01 X-50.13441 Y34.31013
G01 X-50.13992 Y34.32534
G01 X-50.15628 Y34.37622
G01 X-50.17762 Y34.45173
G01 X-50.19453 Y34.52267
G01 X-50.19519 Y34.52605
G01 X-50.20596 Y34.57426
G01 X-50.21025 Y34.59151
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.22234 Y34.64602 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.22234 Y34.64602
G01 X-50.22151 Y34.64231
G01 X-50.22153 Y34.64231
G01 X-50.21025 Y34.59151
G01 X-50.22151 Y34.64231
G01 X-50.21914 Y34.64787
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.88493 Y36.14667 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.88493 Y36.14667
G01 X-48.90142 Y36.22958
G01 X-48.94693 Y36.37964
G01 X-48.98369 Y36.46839
G01 X-49.05763 Y36.60669
G01 X-49.11099 Y36.68658
G01 X-49.12992 Y36.70964
G01 X-49.21048 Y36.80781
G01 X-49.27840 Y36.87573
G01 X-49.31493 Y36.90570
G01 X-49.31493 Y38.56277
G01 X-49.31729 Y38.61080
G01 X-49.32400 Y38.67910
G01 X-49.34274 Y38.77331
G01 X-49.36266 Y38.83897
G01 X-49.39941 Y38.92772
G01 X-49.43177 Y38.98822
G01 X-49.48514 Y39.06808
G01 X-49.52867 Y39.12114
G01 X-49.56095 Y39.15675
G01 X-49.98526 Y39.58111
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-47.44717 Y37.20710 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-47.44717 Y37.20710
G01 X-49.82405 Y39.58395
G01 X-49.87111 Y39.57933
G01 X-49.96718 Y39.57933
G01 X-49.98526 Y39.58111
G01 X-50.11836 Y39.64405
G01 X-50.19567 Y39.68530
G01 X-50.33436 Y39.76843
G01 X-50.39555 Y39.80928
G01 X-50.52288 Y39.90371
G01 X-50.57388 Y39.94555
G01 X-50.69024 Y40.05098
G01 X-50.73512 Y40.09587
G01 X-50.84056 Y40.21222
G01 X-50.88239 Y40.26323
G01 X-50.97683 Y40.39056
G01 X-51.01767 Y40.45175
G01 X-51.10080 Y40.59043
G01 X-51.14205 Y40.66775
G01 X-51.18914 Y40.76726
G01 X-51.18914 Y40.96670
G01 X-51.14208 Y41.06620
G01 X-51.10080 Y41.14354
G01 X-51.01767 Y41.28220
G01 X-50.97683 Y41.34339
G01 X-50.88241 Y41.47074
G01 X-50.84058 Y41.52172
G01 X-50.73512 Y41.63808
G01 X-50.69024 Y41.68296
G01 X-50.57388 Y41.78842
G01 X-50.52293 Y41.83020
G01 X-50.39560 Y41.92467
G01 X-50.33431 Y41.96559
G01 X-50.19562 Y42.04869
G01 X-50.11836 Y42.08992
G01 X-49.98534 Y42.15283
G01 X-49.25118 Y42.88700
G01 X-48.93817 Y42.88702
G01 X-48.25379 Y43.17049
G01 X-48.23429 Y43.17912
G01 X-48.16840 Y43.21029
G01 X-48.13782 Y43.22659
G01 X-48.07716 Y43.26297
G01 X-48.05318 Y43.27897
G01 X-47.99748 Y43.32027
G01 X-47.97767 Y43.33652
G01 X-47.92677 Y43.38265
G01 X-47.91790 Y43.39111
G01 X-45.45004 Y45.85897
G01 X-45.44158 Y45.86786
G01 X-45.39543 Y45.91877
G01 X-45.37920 Y45.93855
G01 X-45.33787 Y45.99425
G01 X-45.32970 Y46.00586
G01 X-45.32728 Y46.01986
G01 X-45.31710 Y46.08849
G01 X-45.31458 Y46.11391
G01 X-45.31120 Y46.18254
G01 X-45.31092 Y46.19481
G01 X-45.31092 Y77.95231
G01 X-45.31120 Y77.96460
G01 X-45.31458 Y78.03323
G01 X-45.31710 Y78.05871
G01 X-45.32728 Y78.12731
G01 X-45.33292 Y78.15556
G01 X-45.35009 Y78.22416
G01 X-45.36018 Y78.25738
G01 X-45.36843 Y78.28037
G01 X-45.39909 Y78.31420
G01 X-45.41125 Y78.32698
G01 X-49.68607 Y82.60178
G01 X-49.69885 Y82.61394
G01 X-49.74975 Y82.66009
G01 X-49.77802 Y82.68328
G01 X-49.83372 Y82.72458
G01 X-49.85788 Y82.74117
G01 X-49.86842 Y82.74287
G01 X-49.93703 Y82.75306
G01 X-49.97409 Y82.75672
G01 X-50.04272 Y82.76009
G01 X-50.06075 Y82.76053
G01 X-57.45215 Y82.76053
G01 X-57.47018 Y82.76009
G01 X-57.53879 Y82.75672
G01 X-57.57582 Y82.75306
G01 X-57.64443 Y82.74287
G01 X-57.68461 Y82.73487
G01 X-57.75322 Y82.71768
G01 X-57.79896 Y82.70378
G01 X-57.86757 Y82.67922
G01 X-57.89401 Y82.66901
G01 X-58.41326 Y82.45392
G01 X-58.59101 Y82.27625
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.75969 Y82.50193 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.75969 Y82.50193
G01 X-58.67183 Y82.45392
G01 X-58.41326 Y82.45392
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.00966 Y76.14982 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.00966 Y76.14982
G01 X-55.00649 Y76.14751
G01 X-54.99092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.84547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.84547 Y74.41083
G01 X-55.79343 Y74.39501
G01 X-55.70468 Y74.35826
G01 X-55.55772 Y74.27969
G01 X-55.47786 Y74.22633
G01 X-55.34906 Y74.12064
G01 X-55.28111 Y74.05269
G01 X-55.17542 Y73.92389
G01 X-55.12206 Y73.84403
G01 X-55.04349 Y73.69707
G01 X-55.00674 Y73.60832
G01 X-54.99092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.55711 Y71.78907 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.55711 Y71.78907
G01 X-53.72094 Y71.77734
G01 X-53.88475 Y71.78907
G01 X-53.86153 Y71.81229
G01 X-53.76897 Y71.80317
G01 X-53.67291 Y71.80317
G01 X-53.58033 Y71.81229
G01 X-53.55711 Y71.78907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.35744 Y73.14081 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.35744 Y73.14081
G01 X-52.36915 Y73.30466
G01 X-52.39242 Y73.28140
G01 X-52.38330 Y73.18884
G01 X-52.38330 Y73.09278
G01 X-52.39242 Y73.00025
G01 X-52.36915 Y72.97700
G01 X-52.35744 Y73.14081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.13633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.13633 Y74.41083
G01 X-53.55940 Y74.41083
G01 X-53.51424 Y74.43220
G01 X-53.44106 Y74.47124
G01 X-53.37283 Y74.51213
G01 X-53.30834 Y74.54665
G01 X-53.29214 Y74.55429
G01 X-53.27324 Y74.56359
G01 X-53.23003 Y74.58561
G01 X-53.21132 Y74.59481
G01 X-53.17603 Y74.61147
G01 X-53.08332 Y74.66461
G01 X-53.02523 Y74.70179
G01 X-53.01495 Y74.70911
G01 X-52.89684 Y74.80801
G01 X-52.88307 Y74.81982
G01 X-52.87088 Y74.83085
G01 X-52.84812 Y74.85673
G01 X-52.74921 Y74.97482
G01 X-52.74190 Y74.98513
G01 X-52.70471 Y75.04322
G01 X-52.65158 Y75.13598
G01 X-52.62597 Y75.19008
G01 X-52.59966 Y75.25361
G01 X-52.57949 Y75.30994
G01 X-52.55150 Y75.41312
G01 X-52.53672 Y75.48048
G01 X-52.53461 Y75.49292
G01 X-52.52102 Y75.64637
G01 X-52.51881 Y75.68081
G01 X-52.52102 Y75.71528
G01 X-52.53461 Y75.86872
G01 X-52.53672 Y75.88119
G01 X-52.55150 Y75.94855
G01 X-52.57949 Y76.05170
G01 X-52.59968 Y76.10806
G01 X-52.62597 Y76.17156
G01 X-52.65158 Y76.22569
G01 X-52.70471 Y76.31843
G01 X-52.74190 Y76.37651
G01 X-52.74921 Y76.38680
G01 X-52.84812 Y76.50491
G01 X-52.87090 Y76.53085
G01 X-52.89684 Y76.55363
G01 X-53.01492 Y76.65254
G01 X-53.02521 Y76.65985
G01 X-53.08332 Y76.69704
G01 X-53.17606 Y76.75017
G01 X-53.23019 Y76.77578
G01 X-53.29369 Y76.80207
G01 X-53.35005 Y76.82226
G01 X-53.45320 Y76.85025
G01 X-53.52056 Y76.86503
G01 X-53.53303 Y76.86714
G01 X-53.68647 Y76.88073
G01 X-53.72092 Y76.88294
G01 X-53.75538 Y76.88073
G01 X-53.90882 Y76.86714
G01 X-53.92127 Y76.86503
G01 X-53.98863 Y76.85025
G01 X-54.09181 Y76.82226
G01 X-54.14814 Y76.80209
G01 X-54.21167 Y76.77578
G01 X-54.26577 Y76.75017
G01 X-54.35853 Y76.69704
G01 X-54.41662 Y76.65985
G01 X-54.42691 Y76.65254
G01 X-54.54502 Y76.55363
G01 X-54.57095 Y76.53082
G01 X-54.58175 Y76.51888
G01 X-54.59374 Y76.50491
G01 X-54.64763 Y76.44055
G01 X-54.70445 Y76.38022
G01 X-54.70517 Y76.37956
G01 X-54.73813 Y76.34634
G01 X-54.75515 Y76.32805
G01 X-54.89028 Y76.21134
G01 X-54.91761 Y76.19214
G01 X-54.97486 Y76.14901
G01 X-54.97514 Y76.14832
G01 X-54.99092 Y76.09620
G01 X-54.99092 Y75.26534
G01 X-54.97514 Y75.21330
G01 X-54.93839 Y75.12455
G01 X-54.85983 Y74.97758
G01 X-54.80646 Y74.89773
G01 X-54.74593 Y74.82397
G01 X-54.70075 Y74.76892
G01 X-54.63283 Y74.70100
G01 X-54.50402 Y74.59529
G01 X-54.42417 Y74.54192
G01 X-54.27720 Y74.46336
G01 X-54.18845 Y74.42661
G01 X-54.13633 Y74.41083
G01 X-54.18845 Y74.39501
G01 X-54.27720 Y74.35826
G01 X-54.42417 Y74.27969
G01 X-54.50402 Y74.22633
G01 X-54.63283 Y74.12064
G01 X-54.70075 Y74.05269
G01 X-54.80646 Y73.92389
G01 X-54.85983 Y73.84403
G01 X-54.93839 Y73.69707
G01 X-54.97514 Y73.60832
G01 X-54.99092 Y73.55620
G01 X-54.99092 Y72.97932
G01 X-55.01228 Y72.93413
G01 X-55.05134 Y72.86095
G01 X-55.09221 Y72.79275
G01 X-55.12688 Y72.72796
G01 X-55.13443 Y72.71201
G01 X-55.14382 Y72.69285
G01 X-55.16569 Y72.64993
G01 X-55.17481 Y72.63136
G01 X-55.19155 Y72.59603
G01 X-55.24471 Y72.50322
G01 X-55.28190 Y72.44513
G01 X-55.28924 Y72.43482
G01 X-55.38208 Y72.32392
G01 X-55.38810 Y72.31671
G01 X-55.41088 Y72.29085
G01 X-55.43684 Y72.26801
G01 X-55.55495 Y72.16911
G01 X-55.56523 Y72.16179
G01 X-55.62332 Y72.12461
G01 X-55.71603 Y72.07147
G01 X-55.77019 Y72.04587
G01 X-55.83374 Y72.01955
G01 X-55.88604 Y72.00083
G01 X-55.89013 Y71.99938
G01 X-55.99325 Y71.97139
G01 X-56.06056 Y71.95661
G01 X-56.07303 Y71.95453
G01 X-56.22647 Y71.94094
G01 X-56.26094 Y71.93873
G01 X-56.29538 Y71.94094
G01 X-56.44882 Y71.95453
G01 X-56.46127 Y71.95661
G01 X-56.52858 Y71.97139
G01 X-56.63181 Y71.99941
G01 X-56.68809 Y72.01955
G01 X-56.75167 Y72.04587
G01 X-56.80580 Y72.07147
G01 X-56.89853 Y72.12461
G01 X-56.95662 Y72.16179
G01 X-56.96691 Y72.16911
G01 X-57.08502 Y72.26801
G01 X-57.11093 Y72.29082
G01 X-57.13374 Y72.31673
G01 X-57.18769 Y72.38115
G01 X-57.24445 Y72.44142
G01 X-57.26594 Y72.46171
G01 X-57.29685 Y72.49268
G01 X-57.31011 Y72.50675
G01 X-57.42899 Y72.61099
G01 X-57.51217 Y72.67182
G01 X-57.51451 Y72.67352
G01 X-57.51540 Y72.67419
G01 X-57.53092 Y72.72534
G01 X-57.53092 Y73.55620
G01 X-57.51514 Y73.60832
G01 X-57.47839 Y73.69707
G01 X-57.39983 Y73.84403
G01 X-57.34646 Y73.92389
G01 X-57.24075 Y74.05269
G01 X-57.17283 Y74.12064
G01 X-57.04402 Y74.22633
G01 X-56.96417 Y74.27969
G01 X-56.81720 Y74.35826
G01 X-56.72845 Y74.39501
G01 X-56.67633 Y74.41083
G01 X-55.84547 Y74.41083
G01 X-55.79343 Y74.42661
G01 X-55.70468 Y74.46336
G01 X-55.55772 Y74.54192
G01 X-55.47786 Y74.59529
G01 X-55.40410 Y74.65582
G01 X-55.34906 Y74.70100
G01 X-55.28111 Y74.76892
G01 X-55.17542 Y74.89773
G01 X-55.12206 Y74.97758
G01 X-55.04349 Y75.12455
G01 X-55.00674 Y75.21330
G01 X-54.99092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.97486 Y76.14901 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.97486 Y76.14901
G01 X-54.97560 Y76.14896
G01 X-55.00966 Y76.14982
G01 X-55.00969 Y76.14985
G01 X-55.09287 Y76.21065
G01 X-55.21164 Y76.31479
G01 X-55.22500 Y76.32897
G01 X-55.25581 Y76.35983
G01 X-55.27740 Y76.38022
G01 X-55.33422 Y76.44055
G01 X-55.38812 Y76.50491
G01 X-55.41093 Y76.53087
G01 X-55.43681 Y76.55365
G01 X-55.55492 Y76.65254
G01 X-55.56521 Y76.65985
G01 X-55.62332 Y76.69704
G01 X-55.71606 Y76.75017
G01 X-55.77019 Y76.77578
G01 X-55.83369 Y76.80207
G01 X-55.89005 Y76.82226
G01 X-55.99320 Y76.85025
G01 X-56.06056 Y76.86503
G01 X-56.07303 Y76.86714
G01 X-56.22647 Y76.88073
G01 X-56.26094 Y76.88294
G01 X-56.29538 Y76.88073
G01 X-56.44882 Y76.86714
G01 X-56.46127 Y76.86503
G01 X-56.52863 Y76.85025
G01 X-56.63181 Y76.82226
G01 X-56.68814 Y76.80209
G01 X-56.75167 Y76.77578
G01 X-56.80577 Y76.75017
G01 X-56.89853 Y76.69704
G01 X-56.95662 Y76.65985
G01 X-56.96691 Y76.65254
G01 X-57.08502 Y76.55363
G01 X-57.11095 Y76.53082
G01 X-57.12175 Y76.51888
G01 X-57.13374 Y76.50491
G01 X-57.18763 Y76.44055
G01 X-57.24445 Y76.38022
G01 X-57.24517 Y76.37956
G01 X-57.27813 Y76.34634
G01 X-57.29515 Y76.32805
G01 X-57.43028 Y76.21134
G01 X-57.45761 Y76.19214
G01 X-57.51486 Y76.14901
G01 X-57.51514 Y76.14832
G01 X-57.53092 Y76.09620
G01 X-57.53092 Y75.26534
G01 X-57.51514 Y75.21330
G01 X-57.47839 Y75.12455
G01 X-57.39983 Y74.97758
G01 X-57.34646 Y74.89773
G01 X-57.28593 Y74.82397
G01 X-57.24075 Y74.76892
G01 X-57.17283 Y74.70100
G01 X-57.04402 Y74.59529
G01 X-56.96417 Y74.54192
G01 X-56.81720 Y74.46336
G01 X-56.72845 Y74.42661
G01 X-56.67633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.53092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.53092 Y75.26534
G01 X-57.54674 Y75.21330
G01 X-57.58349 Y75.12455
G01 X-57.66206 Y74.97758
G01 X-57.71542 Y74.89773
G01 X-57.82111 Y74.76892
G01 X-57.88906 Y74.70100
G01 X-57.94410 Y74.65582
G01 X-58.01786 Y74.59529
G01 X-58.09772 Y74.54192
G01 X-58.24468 Y74.46336
G01 X-58.33343 Y74.42661
G01 X-58.38547 Y74.41083
G01 X-59.21633 Y74.41083
G01 X-59.26845 Y74.39501
G01 X-59.35720 Y74.35826
G01 X-59.50417 Y74.27969
G01 X-59.58402 Y74.22633
G01 X-59.71283 Y74.12064
G01 X-59.78075 Y74.05269
G01 X-59.88646 Y73.92389
G01 X-59.93983 Y73.84403
G01 X-60.01839 Y73.69707
G01 X-60.05514 Y73.60832
G01 X-60.07092 Y73.55620
G01 X-60.07092 Y72.72534
G01 X-60.05540 Y72.67419
G01 X-60.05451 Y72.67352
G01 X-60.05217 Y72.67182
G01 X-59.96899 Y72.61099
G01 X-59.85011 Y72.50675
G01 X-59.83685 Y72.49268
G01 X-59.80594 Y72.46171
G01 X-59.78445 Y72.44142
G01 X-59.72769 Y72.38115
G01 X-59.67374 Y72.31673
G01 X-59.65093 Y72.29082
G01 X-59.62502 Y72.26801
G01 X-59.50691 Y72.16911
G01 X-59.49662 Y72.16179
G01 X-59.43853 Y72.12461
G01 X-59.34580 Y72.07147
G01 X-59.29167 Y72.04587
G01 X-59.22809 Y72.01955
G01 X-59.17181 Y71.99941
G01 X-59.06858 Y71.97139
G01 X-59.00127 Y71.95661
G01 X-58.98882 Y71.95453
G01 X-58.83538 Y71.94094
G01 X-58.80094 Y71.93873
G01 X-58.76647 Y71.94094
G01 X-58.61303 Y71.95453
G01 X-58.60056 Y71.95661
G01 X-58.53325 Y71.97139
G01 X-58.43013 Y71.99938
G01 X-58.42604 Y72.00083
G01 X-58.37374 Y72.01955
G01 X-58.31019 Y72.04587
G01 X-58.25603 Y72.07147
G01 X-58.16332 Y72.12461
G01 X-58.10523 Y72.16179
G01 X-58.09495 Y72.16911
G01 X-57.97684 Y72.26801
G01 X-57.95088 Y72.29085
G01 X-57.92810 Y72.31671
G01 X-57.92210 Y72.32389
G01 X-57.87425 Y72.38104
G01 X-57.81740 Y72.44142
G01 X-57.81672 Y72.44205
G01 X-57.78372 Y72.47530
G01 X-57.76670 Y72.49359
G01 X-57.63160 Y72.61033
G01 X-57.60422 Y72.62953
G01 X-57.54697 Y72.67266
G01 X-57.54626 Y72.67271
G01 X-57.51217 Y72.67182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.54697 Y72.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.54697 Y72.67266
G01 X-57.54674 Y72.67330
G01 X-57.53092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.53092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.53092 Y73.55620
G01 X-57.54674 Y73.60832
G01 X-57.58349 Y73.69707
G01 X-57.66206 Y73.84403
G01 X-57.71542 Y73.92389
G01 X-57.82111 Y74.05269
G01 X-57.88906 Y74.12064
G01 X-58.01786 Y74.22633
G01 X-58.09772 Y74.27969
G01 X-58.24468 Y74.35826
G01 X-58.33343 Y74.39501
G01 X-58.38547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.53092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.53092 Y76.09620
G01 X-57.54649 Y76.14751
G01 X-57.54966 Y76.14982
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-57.51486 Y76.14901 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-57.51486 Y76.14901
G01 X-57.51560 Y76.14896
G01 X-57.54966 Y76.14982
G01 X-57.54969 Y76.14985
G01 X-57.63287 Y76.21065
G01 X-57.75164 Y76.31479
G01 X-57.76500 Y76.32897
G01 X-57.79581 Y76.35983
G01 X-57.81740 Y76.38022
G01 X-57.87422 Y76.44055
G01 X-57.92812 Y76.50491
G01 X-57.95093 Y76.53087
G01 X-57.97681 Y76.55365
G01 X-58.09492 Y76.65254
G01 X-58.10521 Y76.65985
G01 X-58.16332 Y76.69704
G01 X-58.25606 Y76.75017
G01 X-58.31019 Y76.77578
G01 X-58.37369 Y76.80207
G01 X-58.43005 Y76.82226
G01 X-58.53320 Y76.85025
G01 X-58.60056 Y76.86503
G01 X-58.61303 Y76.86714
G01 X-58.76647 Y76.88073
G01 X-58.80094 Y76.88294
G01 X-58.83538 Y76.88073
G01 X-58.98882 Y76.86714
G01 X-59.00127 Y76.86503
G01 X-59.06863 Y76.85025
G01 X-59.17181 Y76.82223
G01 X-59.22814 Y76.80209
G01 X-59.28534 Y76.76392
G01 X-59.42065 Y76.66356
G01 X-59.46789 Y76.62483
G01 X-59.59149 Y76.51279
G01 X-59.63289 Y76.47138
G01 X-59.74493 Y76.34779
G01 X-59.78367 Y76.30054
G01 X-59.88402 Y76.16524
G01 X-59.92222 Y76.10801
G01 X-60.01051 Y75.96069
G01 X-60.04955 Y75.88751
G01 X-60.07092 Y75.84235
G01 X-60.07092 Y75.26534
G01 X-60.05514 Y75.21330
G01 X-60.01839 Y75.12455
G01 X-59.93983 Y74.97758
G01 X-59.88646 Y74.89773
G01 X-59.82593 Y74.82397
G01 X-59.78075 Y74.76892
G01 X-59.71283 Y74.70100
G01 X-59.58402 Y74.59529
G01 X-59.50417 Y74.54192
G01 X-59.35720 Y74.46336
G01 X-59.26845 Y74.42661
G01 X-59.21633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.07092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.07092 Y75.26534
G01 X-60.08674 Y75.21330
G01 X-60.12349 Y75.12455
G01 X-60.20206 Y74.97758
G01 X-60.25542 Y74.89773
G01 X-60.36111 Y74.76892
G01 X-60.42906 Y74.70100
G01 X-60.48410 Y74.65582
G01 X-60.55786 Y74.59529
G01 X-60.63772 Y74.54192
G01 X-60.78468 Y74.46336
G01 X-60.87343 Y74.42661
G01 X-60.92547 Y74.41083
G01 X-61.75633 Y74.41083
G01 X-61.80845 Y74.39501
G01 X-61.89720 Y74.35826
G01 X-62.04417 Y74.27969
G01 X-62.12402 Y74.22633
G01 X-62.25283 Y74.12064
G01 X-62.32075 Y74.05269
G01 X-62.42646 Y73.92389
G01 X-62.47983 Y73.84403
G01 X-62.55839 Y73.69707
G01 X-62.59514 Y73.60832
G01 X-62.61092 Y73.55620
G01 X-62.61092 Y72.72534
G01 X-62.59540 Y72.67419
G01 X-62.59451 Y72.67352
G01 X-62.59217 Y72.67182
G01 X-62.50899 Y72.61099
G01 X-62.39011 Y72.50675
G01 X-62.37685 Y72.49268
G01 X-62.34594 Y72.46171
G01 X-62.32445 Y72.44142
G01 X-62.26769 Y72.38115
G01 X-62.21374 Y72.31673
G01 X-62.19093 Y72.29082
G01 X-62.16502 Y72.26801
G01 X-62.04691 Y72.16911
G01 X-62.03662 Y72.16179
G01 X-61.97853 Y72.12461
G01 X-61.88580 Y72.07147
G01 X-61.83167 Y72.04587
G01 X-61.76809 Y72.01955
G01 X-61.71181 Y71.99941
G01 X-61.60858 Y71.97139
G01 X-61.54127 Y71.95661
G01 X-61.52882 Y71.95453
G01 X-61.37538 Y71.94094
G01 X-61.34094 Y71.93873
G01 X-61.30647 Y71.94094
G01 X-61.15303 Y71.95453
G01 X-61.14056 Y71.95661
G01 X-61.07325 Y71.97139
G01 X-60.97013 Y71.99938
G01 X-60.96604 Y72.00083
G01 X-60.91374 Y72.01955
G01 X-60.85019 Y72.04587
G01 X-60.79603 Y72.07147
G01 X-60.70332 Y72.12461
G01 X-60.64523 Y72.16179
G01 X-60.63495 Y72.16911
G01 X-60.51684 Y72.26801
G01 X-60.49088 Y72.29085
G01 X-60.46810 Y72.31671
G01 X-60.46210 Y72.32389
G01 X-60.41425 Y72.38104
G01 X-60.35740 Y72.44142
G01 X-60.35672 Y72.44205
G01 X-60.32372 Y72.47530
G01 X-60.30670 Y72.49359
G01 X-60.17160 Y72.61033
G01 X-60.14422 Y72.62953
G01 X-60.08697 Y72.67266
G01 X-60.08626 Y72.67271
G01 X-60.05217 Y72.67182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.08697 Y72.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.08697 Y72.67266
G01 X-60.08674 Y72.67330
G01 X-60.07092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.07092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.07092 Y73.55620
G01 X-60.08674 Y73.60832
G01 X-60.12349 Y73.69707
G01 X-60.20206 Y73.84403
G01 X-60.25542 Y73.92389
G01 X-60.36111 Y74.05269
G01 X-60.42906 Y74.12064
G01 X-60.55786 Y74.22633
G01 X-60.63772 Y74.27969
G01 X-60.78468 Y74.35826
G01 X-60.87343 Y74.39501
G01 X-60.92547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.75633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.75633 Y74.41083
G01 X-61.80845 Y74.42661
G01 X-61.89720 Y74.46336
G01 X-62.04417 Y74.54192
G01 X-62.12402 Y74.59529
G01 X-62.25283 Y74.70100
G01 X-62.32075 Y74.76892
G01 X-62.36593 Y74.82397
G01 X-62.42646 Y74.89773
G01 X-62.47983 Y74.97758
G01 X-62.55839 Y75.12455
G01 X-62.59514 Y75.21330
G01 X-62.61092 Y75.26534
G01 X-62.61092 Y75.84235
G01 X-62.63228 Y75.88751
G01 X-62.67134 Y75.96074
G01 X-62.71221 Y76.02892
G01 X-62.74683 Y76.09358
G01 X-62.75443 Y76.10964
G01 X-62.76377 Y76.12869
G01 X-62.78569 Y76.17171
G01 X-62.79484 Y76.19033
G01 X-62.81155 Y76.22566
G01 X-62.86471 Y76.31843
G01 X-62.90190 Y76.37651
G01 X-62.90921 Y76.38680
G01 X-63.00812 Y76.50491
G01 X-63.03090 Y76.53085
G01 X-63.05684 Y76.55363
G01 X-63.17492 Y76.65254
G01 X-63.18521 Y76.65985
G01 X-63.24332 Y76.69704
G01 X-63.33606 Y76.75017
G01 X-63.39019 Y76.77578
G01 X-63.45369 Y76.80207
G01 X-63.51005 Y76.82226
G01 X-63.61320 Y76.85025
G01 X-63.68056 Y76.86503
G01 X-63.69303 Y76.86714
G01 X-63.83375 Y76.87961
G01 X-63.84652 Y76.88022
G01 X-63.91533 Y76.88022
G01 X-63.92808 Y76.87961
G01 X-64.06882 Y76.86714
G01 X-64.08127 Y76.86503
G01 X-64.14863 Y76.85025
G01 X-64.25181 Y76.82223
G01 X-64.30814 Y76.80209
G01 X-64.36534 Y76.76392
G01 X-64.50065 Y76.66356
G01 X-64.54789 Y76.62483
G01 X-64.67149 Y76.51279
G01 X-64.71289 Y76.47138
G01 X-64.82493 Y76.34779
G01 X-64.86367 Y76.30054
G01 X-64.96402 Y76.16524
G01 X-65.00222 Y76.10801
G01 X-65.09051 Y75.96069
G01 X-65.12955 Y75.88751
G01 X-65.15092 Y75.84235
G01 X-65.15092 Y75.26534
G01 X-65.13514 Y75.21330
G01 X-65.09839 Y75.12455
G01 X-65.01983 Y74.97758
G01 X-64.96646 Y74.89773
G01 X-64.90593 Y74.82397
G01 X-64.86075 Y74.76892
G01 X-64.79283 Y74.70100
G01 X-64.66402 Y74.59529
G01 X-64.58417 Y74.54192
G01 X-64.43720 Y74.46336
G01 X-64.34845 Y74.42661
G01 X-64.29633 Y74.41083
G01 X-63.46547 Y74.41083
G01 X-63.41343 Y74.42661
G01 X-63.32468 Y74.46336
G01 X-63.17772 Y74.54192
G01 X-63.09786 Y74.59529
G01 X-63.02410 Y74.65582
G01 X-62.96906 Y74.70100
G01 X-62.90111 Y74.76892
G01 X-62.79542 Y74.89773
G01 X-62.74206 Y74.97758
G01 X-62.66349 Y75.12455
G01 X-62.62674 Y75.21330
G01 X-62.61092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.46547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.46547 Y74.41083
G01 X-63.41343 Y74.39501
G01 X-63.32468 Y74.35826
G01 X-63.17772 Y74.27969
G01 X-63.09786 Y74.22633
G01 X-62.96906 Y74.12064
G01 X-62.90111 Y74.05269
G01 X-62.79542 Y73.92389
G01 X-62.74206 Y73.84403
G01 X-62.66349 Y73.69707
G01 X-62.62674 Y73.60832
G01 X-62.61092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.00836 Y67.26830 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.00836 Y67.26830
G01 X-55.53483 Y67.26830
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.94034 Y67.67376 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.94034 Y67.67376
G01 X-55.92299 Y67.64506
G01 X-55.91913 Y67.60841
G01 X-55.91913 Y67.54722
G01 X-55.92985 Y67.44537
G01 X-55.96150 Y67.34793
G01 X-56.00694 Y67.26922
G01 X-56.00836 Y67.26830
G01 X-56.01735 Y67.26259
G01 X-56.07854 Y67.23142
G01 X-56.33122 Y67.14704
G01 X-56.39241 Y67.13737
G01 X-56.50331 Y67.12858
G01 X-58.04280 Y67.12858
G01 X-58.07031 Y67.12911
G01 X-58.08585 Y67.12972
G01 X-58.22083 Y67.14801
G01 X-58.22563 Y67.15146
G01 X-58.27574 Y67.18789
G01 X-58.36045 Y67.26015
G01 X-59.26419 Y68.16391
G01 X-59.33023 Y68.24013
G01 X-59.36396 Y68.28519
G01 X-59.43985 Y68.40968
G01 X-59.42334 Y68.47163
G01 X-59.41600 Y68.49749
G01 X-59.39787 Y68.55715
G01 X-59.37427 Y68.62319
G01 X-59.35814 Y68.66218
G01 X-59.34839 Y68.68715
G01 X-59.33559 Y68.72174
G01 X-59.30343 Y68.83739
G01 X-59.29332 Y68.87856
G01 X-59.28824 Y68.90462
G01 X-59.28806 Y68.90574
G01 X-59.27399 Y69.06081
G01 X-59.27170 Y69.09533
G01 X-59.27396 Y69.12982
G01 X-59.28804 Y69.28486
G01 X-59.28824 Y69.28600
G01 X-59.30343 Y69.35326
G01 X-59.33561 Y69.46898
G01 X-59.34839 Y69.50353
G01 X-59.37539 Y69.56685
G01 X-59.41227 Y69.64280
G01 X-59.44922 Y69.70520
G01 X-59.48717 Y69.76263
G01 X-59.51603 Y69.80198
G01 X-59.58699 Y69.88361
G01 X-59.63475 Y69.93335
G01 X-59.64422 Y69.94229
G01 X-59.75656 Y70.03210
G01 X-59.79375 Y70.05986
G01 X-59.81356 Y70.07094
G01 X-59.95166 Y70.14521
G01 X-59.96121 Y70.15026
G01 X-60.01585 Y70.17046
G01 X-60.02093 Y70.17208
G01 X-60.17244 Y70.19456
G01 X-60.23622 Y70.20086
G01 X-60.39304 Y70.20858
G01 X-60.45484 Y70.20858
G01 X-60.61166 Y70.20086
G01 X-60.67541 Y70.19456
G01 X-60.82690 Y70.17208
G01 X-60.83198 Y70.17046
G01 X-60.88664 Y70.15024
G01 X-60.89619 Y70.14521
G01 X-61.03429 Y70.07094
G01 X-61.05410 Y70.05986
G01 X-61.09128 Y70.03210
G01 X-61.20363 Y69.94229
G01 X-61.21310 Y69.93335
G01 X-61.26085 Y69.88361
G01 X-61.33182 Y69.80198
G01 X-61.36068 Y69.76263
G01 X-61.37452 Y69.74308
G01 X-61.38707 Y69.69903
G01 X-61.42636 Y69.54221
G01 X-61.43779 Y69.48481
G01 X-61.46106 Y69.32796
G01 X-61.46611 Y69.27681
G01 X-61.47383 Y69.11996
G01 X-61.47383 Y69.07066
G01 X-61.46611 Y68.91384
G01 X-61.46106 Y68.86269
G01 X-61.43779 Y68.70584
G01 X-61.42636 Y68.64844
G01 X-61.38707 Y68.49162
G01 X-61.37452 Y68.44760
G01 X-61.36068 Y68.42802
G01 X-61.33182 Y68.38867
G01 X-61.26085 Y68.30704
G01 X-61.21310 Y68.25730
G01 X-61.20325 Y68.24798
G01 X-61.14130 Y68.19091
G01 X-61.11519 Y68.16386
G01 X-61.11328 Y68.16007
G01 X-61.10909 Y68.15187
G01 X-61.08397 Y68.09726
G01 X-61.07183 Y68.06769
G01 X-61.05692 Y68.03388
G01 X-61.04224 Y68.00282
G01 X-61.02461 Y67.97338
G01 X-60.98633 Y67.91610
G01 X-60.96588 Y67.88855
G01 X-60.94280 Y67.86307
G01 X-60.91907 Y67.83818
G01 X-59.01407 Y65.93318
G01 X-58.98918 Y65.90945
G01 X-58.96370 Y65.88637
G01 X-58.93614 Y65.86592
G01 X-58.87887 Y65.82764
G01 X-58.84943 Y65.81001
G01 X-58.81837 Y65.79533
G01 X-58.75476 Y65.76899
G01 X-58.72243 Y65.75744
G01 X-58.68910 Y65.74908
G01 X-58.62167 Y65.73564
G01 X-58.58763 Y65.73061
G01 X-58.55339 Y65.72891
G01 X-58.51892 Y65.72807
G01 X-50.68656 Y65.72807
G01 X-50.65905 Y65.72754
G01 X-50.64350 Y65.72693
G01 X-50.50850 Y65.70864
G01 X-50.50373 Y65.70519
G01 X-50.45361 Y65.66879
G01 X-50.36890 Y65.59650
G01 X-48.51775 Y63.74535
G01 X-48.49862 Y63.72546
G01 X-48.48806 Y63.71406
G01 X-48.40561 Y63.60575
G01 X-48.40462 Y63.59976
G01 X-48.39494 Y63.53859
G01 X-48.38618 Y63.42770
G01 X-48.38618 Y58.19392
G01 X-48.39090 Y58.11252
G01 X-48.39619 Y58.06700
G01 X-48.45113 Y57.85819
G01 X-48.47620 Y57.79700
G01 X-48.52590 Y57.70840
G01 X-48.52588 Y57.43906
G01 X-48.50266 Y57.40033
G01 X-48.45610 Y57.31348
G01 X-48.38191 Y57.15664
G01 X-48.35486 Y57.09151
G01 X-48.29875 Y56.93467
G01 X-48.28354 Y56.88466
G01 X-48.24427 Y56.72784
G01 X-48.23627 Y56.68778
G01 X-48.21303 Y56.53094
G01 X-48.20962 Y56.49660
G01 X-48.20190 Y56.33978
G01 X-48.20190 Y56.30719
G01 X-48.20962 Y56.15034
G01 X-48.21303 Y56.11598
G01 X-48.23627 Y55.95918
G01 X-48.24427 Y55.91915
G01 X-48.28354 Y55.76231
G01 X-48.29875 Y55.71224
G01 X-48.35489 Y55.55542
G01 X-48.38191 Y55.49032
G01 X-48.45610 Y55.33348
G01 X-48.50261 Y55.24671
G01 X-48.52590 Y55.20785
G01 X-48.63002 Y55.15222
G01 X-48.71874 Y55.11547
G01 X-48.86883 Y55.06993
G01 X-48.96304 Y55.05118
G01 X-49.11912 Y55.03582
G01 X-49.21516 Y55.03582
G01 X-49.26220 Y55.04046
G01 X-49.28605 Y55.01661
G01 X-49.26530 Y55.01349
G01 X-49.06896 Y55.01349
G01 X-48.92319 Y55.03546
G01 X-48.84511 Y55.03808
G01 X-48.80995 Y55.03927
G01 X-48.76461 Y55.03554
G01 X-48.67688 Y55.02017
G01 X-48.59334 Y54.98921
G01 X-48.52636 Y54.94930
G01 X-48.52019 Y54.93899
G01 X-48.48900 Y54.87778
G01 X-48.40462 Y54.62510
G01 X-48.39494 Y54.56393
G01 X-48.38618 Y54.45301
G01 X-48.38618 Y52.88972
G01 X-48.39123 Y52.80544
G01 X-48.39690 Y52.75843
G01 X-48.45428 Y52.54573
G01 X-48.47993 Y52.48451
G01 X-48.51191 Y52.41573
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.72914 Y48.27144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.72914 Y48.27144
G01 X-53.71266 Y48.18866
G01 X-53.68241 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.77586 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.77586 Y48.08894
G01 X-53.74560 Y48.18866
G01 X-53.72914 Y48.27144
G01 X-53.72914 Y48.70245
G01 X-53.71266 Y48.78528
G01 X-53.66714 Y48.93535
G01 X-53.63039 Y49.02409
G01 X-53.55645 Y49.16240
G01 X-53.50308 Y49.24228
G01 X-53.40359 Y49.36351
G01 X-53.33567 Y49.43143
G01 X-53.29912 Y49.46140
G01 X-53.29912 Y50.66808
G01 X-53.31246 Y50.68802
G01 X-53.38637 Y50.82632
G01 X-53.42315 Y50.91507
G01 X-53.44284 Y50.97999
G01 X-53.46867 Y51.06516
G01 X-53.48741 Y51.15937
G01 X-53.50278 Y51.31543
G01 X-53.50278 Y51.32371
G01 X-53.50131 Y51.32604
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.97550 Y51.32739 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.97550 Y51.32739
G01 X-53.97550 Y51.31543
G01 X-53.99087 Y51.15937
G01 X-54.00961 Y51.06516
G01 X-54.05513 Y50.91507
G01 X-54.09188 Y50.82632
G01 X-54.15914 Y50.70054
G01 X-54.15914 Y49.46140
G01 X-54.12259 Y49.43143
G01 X-54.05467 Y49.36351
G01 X-53.95518 Y49.24228
G01 X-53.90181 Y49.16240
G01 X-53.82790 Y49.02409
G01 X-53.79112 Y48.93535
G01 X-53.74560 Y48.78528
G01 X-53.72914 Y48.70245
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.54931 Y51.32604 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.54931 Y51.32604
G01 X-56.55078 Y51.32371
G01 X-56.55078 Y51.31543
G01 X-56.53541 Y51.15937
G01 X-56.51667 Y51.06516
G01 X-56.47115 Y50.91507
G01 X-56.43437 Y50.82632
G01 X-56.36046 Y50.68802
G01 X-56.30709 Y50.60816
G01 X-56.23773 Y50.52366
G01 X-56.20760 Y50.48693
G01 X-56.13968 Y50.41901
G01 X-56.01845 Y50.31952
G01 X-55.93859 Y50.26615
G01 X-55.83912 Y50.21299
G01 X-55.83912 Y49.46140
G01 X-55.87567 Y49.43143
G01 X-55.94359 Y49.36351
G01 X-56.04308 Y49.24228
G01 X-56.09645 Y49.16240
G01 X-56.17039 Y49.02409
G01 X-56.20714 Y48.93535
G01 X-56.24913 Y48.79692
G01 X-56.25093 Y48.78482
G01 X-56.26031 Y48.68998
G01 X-56.26800 Y48.53314
G01 X-56.26800 Y48.44081
G01 X-56.26031 Y48.28399
G01 X-56.25093 Y48.18917
G01 X-56.24913 Y48.17698
G01 X-56.20714 Y48.03857
G01 X-56.17039 Y47.94983
G01 X-56.12170 Y47.85874
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.24913 Y47.82885 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.24913 Y47.82885
G01 X-56.24913 Y48.17698
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.24913 Y48.79692 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.24913 Y48.79692
G01 X-56.24913 Y49.28696
G01 X-56.25855 Y49.38256
G01 X-56.28644 Y49.47449
G01 X-56.33171 Y49.55919
G01 X-56.39267 Y49.63344
G01 X-56.46691 Y49.69437
G01 X-56.55162 Y49.73966
G01 X-56.64354 Y49.76755
G01 X-56.69914 Y49.77301
G01 X-56.69914 Y50.59145
G01 X-56.70150 Y50.63948
G01 X-56.70821 Y50.70778
G01 X-56.72695 Y50.80199
G01 X-56.74687 Y50.86762
G01 X-56.78362 Y50.95637
G01 X-56.81598 Y51.01690
G01 X-56.86935 Y51.09676
G01 X-56.91286 Y51.14979
G01 X-56.94514 Y51.18543
G01 X-57.02812 Y51.26841
G01 X-57.02350 Y51.31543
G01 X-57.02350 Y51.32739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.19218 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.19218 Y55.05659
G01 X-58.21298 Y55.05347
G01 X-58.40930 Y55.05347
G01 X-58.43005 Y55.05659
G01 X-58.40620 Y55.08044
G01 X-58.35916 Y55.07582
G01 X-58.26312 Y55.07582
G01 X-58.21605 Y55.08047
G01 X-58.19218 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.59413 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.59413 Y56.45855
G01 X-59.59878 Y56.41148
G01 X-59.59878 Y56.31544
G01 X-59.59416 Y56.26840
G01 X-59.61603 Y56.24653
G01 X-59.62479 Y56.36347
G01 X-59.61603 Y56.48044
G01 X-59.59413 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-58.19220 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-58.19220 Y57.67035
G01 X-58.21296 Y57.67348
G01 X-58.40930 Y57.67348
G01 X-58.43005 Y57.67035
G01 X-58.40617 Y57.64648
G01 X-58.35916 Y57.65110
G01 X-58.26312 Y57.65110
G01 X-58.21608 Y57.64648
G01 X-58.19220 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.54613 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.54613 Y56.45855
G01 X-56.55078 Y56.41148
G01 X-56.55078 Y56.31544
G01 X-56.54616 Y56.26840
G01 X-56.78713 Y56.02741
G01 X-57.02812 Y56.26843
G01 X-57.02350 Y56.31544
G01 X-57.02350 Y56.41148
G01 X-57.02812 Y56.45855
G01 X-56.78713 Y56.69954
G01 X-56.54613 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.14420 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.14420 Y57.67035
G01 X-55.16496 Y57.67348
G01 X-55.36130 Y57.67348
G01 X-55.38205 Y57.67035
G01 X-55.35817 Y57.64648
G01 X-55.31116 Y57.65110
G01 X-55.21512 Y57.65110
G01 X-55.16808 Y57.64648
G01 X-55.14420 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.49813 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.49813 Y56.45855
G01 X-53.50278 Y56.41148
G01 X-53.50278 Y56.31544
G01 X-53.49816 Y56.26840
G01 X-53.73913 Y56.02741
G01 X-53.98012 Y56.26843
G01 X-53.97550 Y56.31544
G01 X-53.97550 Y56.41148
G01 X-53.98012 Y56.45855
G01 X-53.73913 Y56.69954
G01 X-53.49813 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.09620 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.09620 Y57.67035
G01 X-52.11696 Y57.67348
G01 X-52.31330 Y57.67348
G01 X-52.33405 Y57.67035
G01 X-52.31017 Y57.64648
G01 X-52.26316 Y57.65110
G01 X-52.16712 Y57.65110
G01 X-52.12008 Y57.64648
G01 X-52.09620 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.45013 Y56.41854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.45013 Y56.41854
G01 X-50.45478 Y56.37150
G01 X-50.45478 Y56.27544
G01 X-50.45016 Y56.22842
G01 X-50.67114 Y56.00744
G01 X-50.93212 Y56.26843
G01 X-50.92750 Y56.31544
G01 X-50.92750 Y56.41148
G01 X-50.93212 Y56.45855
G01 X-50.71114 Y56.67953
G01 X-50.45013 Y56.41854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.09618 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.09618 Y55.05659
G01 X-52.11698 Y55.05347
G01 X-52.31330 Y55.05347
G01 X-52.33405 Y55.05659
G01 X-52.31020 Y55.08044
G01 X-52.26316 Y55.07582
G01 X-52.16712 Y55.07582
G01 X-52.12005 Y55.08047
G01 X-52.09618 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.14418 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.14418 Y55.05659
G01 X-55.16498 Y55.05347
G01 X-55.36130 Y55.05347
G01 X-55.38205 Y55.05659
G01 X-55.35820 Y55.08044
G01 X-55.31116 Y55.07582
G01 X-55.21512 Y55.07582
G01 X-55.16805 Y55.08047
G01 X-55.14418 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-50.92816 Y51.30862 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-50.92816 Y51.30862
G01 X-50.87444 Y51.28716
G01 X-50.77589 Y51.25929
G01 X-50.67370 Y51.25251
G01 X-50.57236 Y51.26714
G01 X-50.51305 Y51.28215
G01 X-50.45417 Y51.30382
G01 X-50.41282 Y51.36734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.52590 Y50.20783 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.52590 Y50.20783
G01 X-48.50266 Y50.24662
G01 X-48.45610 Y50.33346
G01 X-48.38191 Y50.49031
G01 X-48.35486 Y50.55543
G01 X-48.29875 Y50.71228
G01 X-48.28354 Y50.76229
G01 X-48.24427 Y50.91911
G01 X-48.23627 Y50.95917
G01 X-48.21303 Y51.11601
G01 X-48.20962 Y51.15035
G01 X-48.20190 Y51.30717
G01 X-48.20190 Y51.33976
G01 X-48.20962 Y51.49661
G01 X-48.21303 Y51.53097
G01 X-48.23627 Y51.68777
G01 X-48.24427 Y51.72780
G01 X-48.28354 Y51.88464
G01 X-48.29875 Y51.93470
G01 X-48.35489 Y52.09152
G01 X-48.38191 Y52.15662
G01 X-48.45610 Y52.31347
G01 X-48.50261 Y52.40024
G01 X-48.51191 Y52.41573
G01 X-48.67134 Y52.41725
G01 X-48.73457 Y52.42322
G01 X-48.75118 Y52.42462
G01 X-48.79715 Y52.42797
G01 X-48.90894 Y52.44486
G01 X-48.90962 Y52.44502
G01 X-48.97668 Y52.45726
G01 X-49.07211 Y52.46991
G01 X-49.13271 Y52.47288
G01 X-49.20152 Y52.47288
G01 X-49.26212 Y52.46991
G01 X-49.35758 Y52.45726
G01 X-49.42534 Y52.44486
G01 X-49.44965 Y52.43917
G01 X-49.57518 Y52.39861
G01 X-49.62984 Y52.37839
G01 X-49.63939 Y52.37336
G01 X-49.77751 Y52.29907
G01 X-49.79730 Y52.28802
G01 X-49.83451 Y52.26023
G01 X-49.94683 Y52.17044
G01 X-49.95633 Y52.16148
G01 X-50.00401 Y52.11177
G01 X-50.07502 Y52.03011
G01 X-50.10383 Y51.99084
G01 X-50.14180 Y51.93338
G01 X-50.17878 Y51.87095
G01 X-50.21566 Y51.79500
G01 X-50.24266 Y51.73166
G01 X-50.26141 Y51.68096
G01 X-50.30136 Y51.58561
G01 X-50.31036 Y51.56780
G01 X-50.33370 Y51.51715
G01 X-50.33667 Y51.51007
G01 X-50.41282 Y51.36734
G01 X-50.45478 Y51.30288
G01 X-50.45478 Y51.27542
G01 X-50.45016 Y51.22841
G01 X-50.51310 Y51.16547
G01 X-50.54538 Y51.12983
G01 X-50.58892 Y51.07679
G01 X-50.64228 Y50.99691
G01 X-50.67462 Y50.93641
G01 X-50.71140 Y50.84766
G01 X-50.73131 Y50.78200
G01 X-50.75006 Y50.68779
G01 X-50.75676 Y50.61949
G01 X-50.75912 Y50.57146
G01 X-50.75912 Y49.46140
G01 X-50.79567 Y49.43143
G01 X-50.86359 Y49.36351
G01 X-50.96308 Y49.24228
G01 X-51.01645 Y49.16240
G01 X-51.09039 Y49.02409
G01 X-51.12714 Y48.93535
G01 X-51.17266 Y48.78528
G01 X-51.18914 Y48.70245
G01 X-51.18914 Y48.27144
G01 X-51.20560 Y48.18866
G01 X-51.23586 Y48.08894
G01 X-51.28650 Y48.04934
G01 X-51.35778 Y47.98716
G01 X-51.42430 Y47.92234
G01 X-51.46697 Y47.87576
G01 X-51.47187 Y47.87032
G01 X-51.51952 Y47.81729
G01 X-51.54251 Y47.79036
G01 X-51.62221 Y47.69870
G01 X-51.66992 Y47.64896
G01 X-51.67942 Y47.64000
G01 X-51.79173 Y47.55021
G01 X-51.82895 Y47.52244
G01 X-51.84878 Y47.51135
G01 X-51.98691 Y47.43708
G01 X-51.99638 Y47.43207
G01 X-52.05102 Y47.41188
G01 X-52.17660 Y47.37129
G01 X-52.20085 Y47.36560
G01 X-52.26867 Y47.35320
G01 X-52.36415 Y47.34053
G01 X-52.42473 Y47.33756
G01 X-52.49354 Y47.33756
G01 X-52.55412 Y47.34053
G01 X-52.64957 Y47.35320
G01 X-52.71736 Y47.36560
G01 X-52.74164 Y47.37129
G01 X-52.86722 Y47.41188
G01 X-52.92186 Y47.43207
G01 X-52.93138 Y47.43710
G01 X-53.06948 Y47.51137
G01 X-53.08929 Y47.52244
G01 X-53.12648 Y47.55018
G01 X-53.23882 Y47.64000
G01 X-53.24832 Y47.64896
G01 X-53.29605 Y47.69870
G01 X-53.37860 Y47.79364
G01 X-53.39897 Y47.81711
G01 X-53.44731 Y47.87035
G01 X-53.46158 Y47.88757
G01 X-53.56039 Y47.98727
G01 X-53.63278 Y48.04896
G01 X-53.66994 Y48.07926
G01 X-53.68241 Y48.08899
G01 X-53.73057 Y48.09140
G01 X-53.77586 Y48.08894
G01 X-53.82650 Y48.04934
G01 X-53.89778 Y47.98716
G01 X-53.96430 Y47.92234
G01 X-54.00697 Y47.87576
G01 X-54.01187 Y47.87032
G01 X-54.05952 Y47.81729
G01 X-54.08251 Y47.79036
G01 X-54.16221 Y47.69870
G01 X-54.20992 Y47.64896
G01 X-54.21942 Y47.64000
G01 X-54.33173 Y47.55021
G01 X-54.36895 Y47.52244
G01 X-54.38878 Y47.51135
G01 X-54.52691 Y47.43708
G01 X-54.53638 Y47.43207
G01 X-54.59102 Y47.41188
G01 X-54.71660 Y47.37129
G01 X-54.74085 Y47.36560
G01 X-54.80867 Y47.35320
G01 X-54.90415 Y47.34053
G01 X-54.96473 Y47.33756
G01 X-55.03354 Y47.33756
G01 X-55.09412 Y47.34053
G01 X-55.18957 Y47.35320
G01 X-55.25736 Y47.36560
G01 X-55.28164 Y47.37129
G01 X-55.40722 Y47.41188
G01 X-55.46186 Y47.43207
G01 X-55.47138 Y47.43710
G01 X-55.60948 Y47.51137
G01 X-55.62929 Y47.52244
G01 X-55.66648 Y47.55021
G01 X-55.77372 Y47.63591
G01 X-55.78916 Y47.64792
G01 X-55.84583 Y47.69069
G01 X-55.86490 Y47.70464
G01 X-55.91675 Y47.74129
G01 X-55.98119 Y47.78249
G01 X-56.06272 Y47.82961
G01 X-56.12355 Y47.85966
G01 X-56.18408 Y47.84886
G01 X-56.24286 Y47.83189
G01 X-56.24862 Y47.82966
G01 X-56.24913 Y47.82885
G01 X-56.33907 Y47.68699
G01 X-56.37555 Y47.61620
G01 X-56.39675 Y47.57782
G01 X-56.43592 Y47.51160
G01 X-56.46241 Y47.47017
G01 X-56.52233 Y47.41025
G01 X-56.59485 Y47.36641
G01 X-56.68098 Y47.33995
G01 X-56.69848 Y47.33789
G01 X-56.73912 Y47.33672
G01 X-58.33912 Y47.33672
G01 X-58.37978 Y47.33789
G01 X-58.39726 Y47.33995
G01 X-58.48342 Y47.36641
G01 X-58.55591 Y47.41025
G01 X-58.61585 Y47.47020
G01 X-58.65969 Y47.54269
G01 X-58.68616 Y47.62882
G01 X-58.68822 Y47.64632
G01 X-58.68938 Y47.68699
G01 X-58.68938 Y49.28698
G01 X-58.68822 Y49.32762
G01 X-58.68616 Y49.34512
G01 X-58.65969 Y49.43125
G01 X-58.61585 Y49.50375
G01 X-58.56881 Y49.55201
G01 X-58.48433 Y49.63064
G01 X-58.43414 Y49.67372
G01 X-58.34590 Y49.74370
G01 X-58.34186 Y49.92534
G01 X-58.34669 Y49.98652
G01 X-58.36144 Y50.09381
G01 X-58.50612 Y50.18360
G01 X-58.52187 Y50.19145
G01 X-58.57580 Y50.22099
G01 X-58.57773 Y50.22216
G01 X-58.70470 Y50.28271
G01 X-58.71778 Y50.28746
G01 X-58.71933 Y50.28802
G01 X-58.74056 Y50.29564
G01 X-58.77384 Y50.30857
G01 X-58.78334 Y50.31357
G01 X-58.92146 Y50.38784
G01 X-58.94130 Y50.39894
G01 X-58.97851 Y50.42671
G01 X-59.09083 Y50.51650
G01 X-59.10033 Y50.52546
G01 X-59.14803 Y50.57519
G01 X-59.21902 Y50.65683
G01 X-59.24785 Y50.69615
G01 X-59.28580 Y50.75355
G01 X-59.32276 Y50.81599
G01 X-59.35964 Y50.89191
G01 X-59.38666 Y50.95528
G01 X-59.39944 Y50.98985
G01 X-59.43162 Y51.10555
G01 X-59.44681 Y51.17283
G01 X-59.44699 Y51.17392
G01 X-59.46106 Y51.32902
G01 X-59.46335 Y51.36346
G01 X-59.46106 Y51.39793
G01 X-59.44702 Y51.55302
G01 X-59.44681 Y51.55411
G01 X-59.43162 Y51.62142
G01 X-59.39944 Y51.73709
G01 X-59.38666 Y51.77166
G01 X-59.35964 Y51.83503
G01 X-59.32276 Y51.91096
G01 X-59.28580 Y51.97339
G01 X-59.24785 Y52.03079
G01 X-59.21902 Y52.07011
G01 X-59.14803 Y52.15175
G01 X-59.10033 Y52.20148
G01 X-59.09083 Y52.21045
G01 X-58.97851 Y52.30024
G01 X-58.94130 Y52.32802
G01 X-58.92151 Y52.33907
G01 X-58.78339 Y52.41337
G01 X-58.77384 Y52.41840
G01 X-58.71918 Y52.43861
G01 X-58.59365 Y52.47918
G01 X-58.56934 Y52.48487
G01 X-58.50158 Y52.49726
G01 X-58.40612 Y52.50991
G01 X-58.34552 Y52.51288
G01 X-58.27671 Y52.51288
G01 X-58.21611 Y52.50991
G01 X-58.12068 Y52.49726
G01 X-58.05294 Y52.48487
G01 X-58.02860 Y52.47918
G01 X-57.90308 Y52.43861
G01 X-57.84842 Y52.41840
G01 X-57.83884 Y52.41334
G01 X-57.70071 Y52.33905
G01 X-57.68095 Y52.32802
G01 X-57.64377 Y52.30026
G01 X-57.53142 Y52.21045
G01 X-57.52192 Y52.20148
G01 X-57.47420 Y52.15175
G01 X-57.47283 Y52.15015
G01 X-57.40320 Y52.07009
G01 X-57.37438 Y52.03079
G01 X-57.36500 Y52.01769
G01 X-57.33643 Y51.97334
G01 X-57.29950 Y51.91103
G01 X-57.27717 Y51.86503
G01 X-57.26259 Y51.83498
G01 X-57.23559 Y51.77166
G01 X-57.22982 Y51.75609
G01 X-57.22213 Y51.73524
G01 X-57.18794 Y51.64464
G01 X-57.17897 Y51.62498
G01 X-57.16322 Y51.58789
G01 X-57.15096 Y51.55660
G01 X-57.07387 Y51.40659
G01 X-57.02962 Y51.33722
G01 X-57.02350 Y51.32739
G01 X-57.02266 Y51.32607
G01 X-56.97570 Y51.30725
G01 X-56.87702 Y51.27933
G01 X-56.77473 Y51.27258
G01 X-56.67326 Y51.28723
G01 X-56.61395 Y51.30227
G01 X-56.54931 Y51.32604
G01 X-56.54931 Y51.32607
G01 X-56.49975 Y51.40646
G01 X-56.43643 Y51.52904
G01 X-56.42487 Y51.55668
G01 X-56.41113 Y51.58761
G01 X-56.39378 Y51.62452
G01 X-56.35843 Y51.71497
G01 X-56.35451 Y51.72747
G01 X-56.35213 Y51.73524
G01 X-56.33866 Y51.77166
G01 X-56.31164 Y51.83503
G01 X-56.27476 Y51.91096
G01 X-56.23780 Y51.97339
G01 X-56.19985 Y52.03079
G01 X-56.17102 Y52.07011
G01 X-56.10003 Y52.15175
G01 X-56.05233 Y52.20148
G01 X-56.04283 Y52.21045
G01 X-55.93051 Y52.30024
G01 X-55.89330 Y52.32802
G01 X-55.87351 Y52.33907
G01 X-55.73539 Y52.41337
G01 X-55.72584 Y52.41840
G01 X-55.67118 Y52.43861
G01 X-55.54565 Y52.47918
G01 X-55.52134 Y52.48487
G01 X-55.45358 Y52.49726
G01 X-55.35812 Y52.50991
G01 X-55.29752 Y52.51288
G01 X-55.22871 Y52.51288
G01 X-55.16811 Y52.50991
G01 X-55.07268 Y52.49726
G01 X-55.00494 Y52.48487
G01 X-54.98060 Y52.47918
G01 X-54.85508 Y52.43861
G01 X-54.80042 Y52.41840
G01 X-54.79084 Y52.41334
G01 X-54.65271 Y52.33905
G01 X-54.63295 Y52.32802
G01 X-54.59577 Y52.30026
G01 X-54.48342 Y52.21045
G01 X-54.47392 Y52.20148
G01 X-54.42620 Y52.15175
G01 X-54.42483 Y52.15015
G01 X-54.35520 Y52.07009
G01 X-54.32638 Y52.03079
G01 X-54.31700 Y52.01769
G01 X-54.28843 Y51.97334
G01 X-54.25150 Y51.91103
G01 X-54.22917 Y51.86503
G01 X-54.21459 Y51.83498
G01 X-54.18759 Y51.77166
G01 X-54.18182 Y51.75609
G01 X-54.17413 Y51.73524
G01 X-54.13994 Y51.64464
G01 X-54.13097 Y51.62498
G01 X-54.11522 Y51.58789
G01 X-54.10296 Y51.55660
G01 X-54.02587 Y51.40659
G01 X-53.98162 Y51.33722
G01 X-53.97550 Y51.32739
G01 X-53.97466 Y51.32607
G01 X-53.92770 Y51.30725
G01 X-53.82902 Y51.27933
G01 X-53.72673 Y51.27258
G01 X-53.62526 Y51.28723
G01 X-53.56595 Y51.30227
G01 X-53.50131 Y51.32604
G01 X-53.50131 Y51.32607
G01 X-53.45175 Y51.40646
G01 X-53.38843 Y51.52904
G01 X-53.37687 Y51.55668
G01 X-53.36313 Y51.58761
G01 X-53.34578 Y51.62452
G01 X-53.31043 Y51.71497
G01 X-53.30651 Y51.72747
G01 X-53.30413 Y51.73524
G01 X-53.29066 Y51.77166
G01 X-53.26364 Y51.83503
G01 X-53.22676 Y51.91096
G01 X-53.18980 Y51.97339
G01 X-53.15185 Y52.03079
G01 X-53.12302 Y52.07011
G01 X-53.05203 Y52.15175
G01 X-53.00433 Y52.20148
G01 X-52.99483 Y52.21045
G01 X-52.88251 Y52.30024
G01 X-52.84530 Y52.32802
G01 X-52.82551 Y52.33907
G01 X-52.68739 Y52.41337
G01 X-52.67784 Y52.41840
G01 X-52.62318 Y52.43861
G01 X-52.49765 Y52.47918
G01 X-52.47334 Y52.48487
G01 X-52.40558 Y52.49726
G01 X-52.31012 Y52.50991
G01 X-52.24952 Y52.51288
G01 X-52.18071 Y52.51288
G01 X-52.12011 Y52.50991
G01 X-52.02468 Y52.49726
G01 X-51.95694 Y52.48487
G01 X-51.93260 Y52.47918
G01 X-51.80708 Y52.43861
G01 X-51.75242 Y52.41840
G01 X-51.74284 Y52.41334
G01 X-51.60471 Y52.33905
G01 X-51.58495 Y52.32802
G01 X-51.54777 Y52.30026
G01 X-51.43542 Y52.21045
G01 X-51.42592 Y52.20148
G01 X-51.37820 Y52.15175
G01 X-51.37683 Y52.15015
G01 X-51.30720 Y52.07009
G01 X-51.27838 Y52.03079
G01 X-51.26900 Y52.01769
G01 X-51.24043 Y51.97334
G01 X-51.20350 Y51.91103
G01 X-51.18117 Y51.86503
G01 X-51.16659 Y51.83498
G01 X-51.13959 Y51.77166
G01 X-51.13382 Y51.75609
G01 X-51.12681 Y51.73707
G01 X-51.12481 Y51.72985
G01 X-51.08645 Y51.62482
G01 X-51.08607 Y51.62404
G01 X-51.06298 Y51.56732
G01 X-51.05897 Y51.55619
G01 X-50.98673 Y51.40572
G01 X-50.93032 Y51.31218
G01 X-50.92816 Y51.30862
G01 X-50.94287 Y51.15937
G01 X-50.96161 Y51.06516
G01 X-51.00713 Y50.91507
G01 X-51.04388 Y50.82632
G01 X-51.11782 Y50.68802
G01 X-51.17119 Y50.60816
G01 X-51.27068 Y50.48693
G01 X-51.33860 Y50.41901
G01 X-51.45983 Y50.31952
G01 X-51.53969 Y50.26615
G01 X-51.61914 Y50.22368
G01 X-51.61914 Y49.46140
G01 X-51.58259 Y49.43143
G01 X-51.51467 Y49.36351
G01 X-51.41518 Y49.24228
G01 X-51.36181 Y49.16240
G01 X-51.28790 Y49.02409
G01 X-51.25112 Y48.93535
G01 X-51.20560 Y48.78528
G01 X-51.18914 Y48.70245
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.18914 Y48.27144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.18914 Y48.27144
G01 X-51.17266 Y48.18866
G01 X-51.14241 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-51.23586 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-51.23586 Y48.08894
G01 X-51.19057 Y48.09140
G01 X-51.14241 Y48.08899
G01 X-51.12994 Y48.07926
G01 X-51.09278 Y48.04896
G01 X-51.02039 Y47.98727
G01 X-50.92158 Y47.88757
G01 X-50.90731 Y47.87035
G01 X-50.85897 Y47.81711
G01 X-50.83860 Y47.79364
G01 X-50.75605 Y47.69870
G01 X-50.70832 Y47.64896
G01 X-50.69882 Y47.64000
G01 X-50.58648 Y47.55018
G01 X-50.54929 Y47.52244
G01 X-50.52948 Y47.51137
G01 X-50.39138 Y47.43710
G01 X-50.38186 Y47.43207
G01 X-50.32722 Y47.41188
G01 X-50.20164 Y47.37129
G01 X-50.17736 Y47.36560
G01 X-50.10957 Y47.35320
G01 X-50.01412 Y47.34053
G01 X-49.95354 Y47.33756
G01 X-49.88473 Y47.33756
G01 X-49.82415 Y47.34053
G01 X-49.72867 Y47.35320
G01 X-49.66085 Y47.36560
G01 X-49.63660 Y47.37129
G01 X-49.51102 Y47.41188
G01 X-49.50472 Y47.41394
G01 X-49.47569 Y47.42364
G01 X-49.45938 Y47.42928
G01 X-49.44543 Y47.43433
G01 X-49.31363 Y47.46865
G01 X-49.28823 Y47.47292
G01 X-49.24985 Y47.48031
G01 X-49.20271 Y47.49049
G01 X-49.08839 Y47.50492
G01 X-49.08836 Y47.50492
G01 X-49.04259 Y47.54251
G01 X-48.97467 Y47.61043
G01 X-48.87518 Y47.73166
G01 X-48.82181 Y47.81152
G01 X-48.74790 Y47.94983
G01 X-48.71112 Y48.03857
G01 X-48.66560 Y48.18866
G01 X-48.64686 Y48.28287
G01 X-48.63149 Y48.43893
G01 X-48.63149 Y48.53499
G01 X-48.64686 Y48.69107
G01 X-48.66560 Y48.78528
G01 X-48.71112 Y48.93535
G01 X-48.74790 Y49.02409
G01 X-48.82181 Y49.16240
G01 X-48.87518 Y49.24228
G01 X-48.97467 Y49.36351
G01 X-48.98572 Y49.37454
G01 X-49.04259 Y49.43143
G01 X-49.07914 Y49.46140
G01 X-49.07914 Y50.03976
G01 X-48.96304 Y50.05119
G01 X-48.86883 Y50.06994
G01 X-48.71874 Y50.11545
G01 X-48.63002 Y50.15221
G01 X-48.52590 Y50.20783
G01 X-48.52590 Y47.38328
G01 X-48.79039 Y47.11879
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-49.08836 Y47.50492 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-49.08836 Y47.50492
G01 X-49.08260 Y47.50566
G01 X-49.04676 Y47.48742
G01 X-48.96708 Y47.42288
G01 X-48.92382 Y47.37960
G01 X-48.85943 Y47.30002
G01 X-48.81295 Y47.20878
G01 X-48.78978 Y47.12232
G01 X-48.79039 Y47.11879
G01 X-48.79210 Y47.10901
G01 X-48.81331 Y47.04371
G01 X-48.93235 Y46.80533
G01 X-48.96875 Y46.75521
G01 X-49.04097 Y46.67061
G01 X-49.25275 Y46.45882
G01 X-49.27231 Y46.44000
G01 X-49.28374 Y46.42943
G01 X-49.39235 Y46.34668
G01 X-49.39834 Y46.34569
G01 X-49.45953 Y46.33601
G01 X-49.57043 Y46.32722
G01 X-52.77913 Y46.32722
G01 X-52.81358 Y46.32638
G01 X-52.84787 Y46.32471
G01 X-52.88185 Y46.31965
G01 X-52.94929 Y46.30624
G01 X-52.98264 Y46.29789
G01 X-53.01495 Y46.28633
G01 X-53.07855 Y46.25999
G01 X-53.10961 Y46.24528
G01 X-53.13905 Y46.22765
G01 X-53.18800 Y46.19547
G01 X-53.19633 Y46.18938
G01 X-53.22386 Y46.16896
G01 X-53.24936 Y46.14584
G01 X-53.27426 Y46.12214
G01 X-57.24760 Y42.14882
G01 X-57.26716 Y42.13000
G01 X-57.27859 Y42.11943
G01 X-57.39246 Y42.03343
G01 X-57.40056 Y42.02845
G01 X-57.45332 Y42.02274
G01 X-57.50447 Y42.01900
G01 X-57.56528 Y42.01674
G01 X-57.57354 Y42.01639
G01 X-57.63414 Y42.01341
G01 X-57.72957 Y42.00076
G01 X-57.79731 Y41.98837
G01 X-57.82164 Y41.98268
G01 X-57.91207 Y41.95344
G01 X-57.94717 Y41.94212
G01 X-58.00186 Y41.92190
G01 X-58.01141 Y41.91684
G01 X-58.14953 Y41.84255
G01 X-58.16927 Y41.83152
G01 X-58.20648 Y41.80376
G01 X-58.31882 Y41.71395
G01 X-58.32832 Y41.70498
G01 X-58.37605 Y41.65525
G01 X-58.44702 Y41.57361
G01 X-58.47587 Y41.53429
G01 X-58.51382 Y41.47684
G01 X-58.55078 Y41.41446
G01 X-58.58766 Y41.33848
G01 X-58.61463 Y41.27521
G01 X-58.62746 Y41.24057
G01 X-58.65962 Y41.12497
G01 X-58.67483 Y41.05761
G01 X-58.67501 Y41.05652
G01 X-58.68908 Y40.90143
G01 X-58.69180 Y40.85218
G01 X-58.69208 Y40.83843
G01 X-58.69218 Y40.83221
G01 X-58.69220 Y40.83104
G01 X-58.70066 Y40.72845
G01 X-58.71590 Y40.70666
G01 X-58.75230 Y40.65655
G01 X-58.82456 Y40.57184
G01 X-60.81006 Y38.58634
G01 X-60.83375 Y38.56145
G01 X-60.85687 Y38.53595
G01 X-60.87729 Y38.50842
G01 X-60.91557 Y38.45114
G01 X-60.93322 Y38.42168
G01 X-60.94790 Y38.39064
G01 X-60.97424 Y38.32704
G01 X-60.98582 Y38.29468
G01 X-60.99415 Y38.26138
G01 X-61.00759 Y38.19391
G01 X-61.01262 Y38.15990
G01 X-61.01432 Y38.12561
G01 X-61.01516 Y38.09120
G01 X-61.01516 Y37.04423
G01 X-61.01544 Y37.02407
G01 X-61.01577 Y37.01259
G01 X-61.03220 Y36.87967
G01 X-61.03853 Y36.85069
G01 X-61.05872 Y36.82452
G01 X-61.10490 Y36.77027
G01 X-61.13360 Y36.73971
G01 X-61.15181 Y36.71957
G01 X-61.23152 Y36.62790
G01 X-61.25450 Y36.60098
G01 X-61.30218 Y36.54792
G01 X-61.30701 Y36.54258
G01 X-61.34965 Y36.49600
G01 X-61.41630 Y36.43105
G01 X-61.48755 Y36.36890
G01 X-61.53815 Y36.32935
G01 X-61.58321 Y36.32686
G01 X-61.63164 Y36.32925
G01 X-61.64389 Y36.33882
G01 X-61.68128 Y36.36930
G01 X-61.75364 Y36.43095
G01 X-61.85247 Y36.53070
G01 X-61.86677 Y36.54794
G01 X-61.91511 Y36.60118
G01 X-61.93533 Y36.62447
G01 X-62.01803 Y36.71957
G01 X-62.06573 Y36.76928
G01 X-62.07523 Y36.77824
G01 X-62.18757 Y36.86806
G01 X-62.22476 Y36.89580
G01 X-62.24452 Y36.90685
G01 X-62.38265 Y36.98114
G01 X-62.39220 Y36.98619
G01 X-62.44688 Y37.00641
G01 X-62.57241 Y37.04698
G01 X-62.59674 Y37.05267
G01 X-62.66448 Y37.06506
G01 X-62.75991 Y37.07771
G01 X-62.82052 Y37.08068
G01 X-62.88932 Y37.08068
G01 X-62.94993 Y37.07771
G01 X-63.04538 Y37.06506
G01 X-63.11315 Y37.05267
G01 X-63.13743 Y37.04698
G01 X-63.26298 Y37.00641
G01 X-63.31767 Y36.98619
G01 X-63.32720 Y36.98114
G01 X-63.46532 Y36.90685
G01 X-63.48508 Y36.89582
G01 X-63.52227 Y36.86806
G01 X-63.59550 Y36.80954
G01 X-63.63464 Y36.77824
G01 X-63.64411 Y36.76930
G01 X-63.69181 Y36.71957
G01 X-63.76281 Y36.63791
G01 X-63.79163 Y36.59864
G01 X-63.82961 Y36.54119
G01 X-63.86662 Y36.47870
G01 X-63.90347 Y36.40281
G01 X-63.91015 Y36.38863
G01 X-63.91833 Y36.37009
G01 X-63.92747 Y36.34853
G01 X-63.93116 Y36.33966
G01 X-63.93250 Y36.33639
G01 X-63.99786 Y36.21205
G01 X-64.00657 Y36.19867
G01 X-64.03164 Y36.15755
G01 X-64.04871 Y36.12762
G01 X-64.14099 Y35.99547
G01 X-64.14238 Y35.99349
G01 X-64.15046 Y35.99011
G01 X-64.20875 Y35.97903
G01 X-64.20878 Y35.97903
G01 X-64.25295 Y35.99311
G01 X-64.31627 Y36.01632
G01 X-64.54302 Y36.14058
G01 X-64.59151 Y36.17863
G01 X-64.74449 Y36.34375
G01 X-64.76748 Y36.37799
G01 X-64.77065 Y36.39912
G01 X-64.77837 Y36.48066
G01 X-64.77962 Y36.51340
G01 X-64.78198 Y36.54992
G01 X-64.79605 Y36.70504
G01 X-64.79623 Y36.70611
G01 X-64.81142 Y36.77342
G01 X-64.84360 Y36.88909
G01 X-64.85638 Y36.92366
G01 X-64.88338 Y36.98701
G01 X-64.92026 Y37.06295
G01 X-64.95724 Y37.12539
G01 X-64.99521 Y37.18284
G01 X-65.01208 Y37.20580
G01 X-65.02402 Y37.22211
G01 X-65.09504 Y37.30377
G01 X-65.14274 Y37.35350
G01 X-65.15221 Y37.36245
G01 X-65.26458 Y37.45226
G01 X-65.30177 Y37.48000
G01 X-65.32153 Y37.49105
G01 X-65.45965 Y37.56534
G01 X-65.46918 Y37.57037
G01 X-65.51200 Y37.58665
G01 X-65.52386 Y37.59059
G01 X-65.61530 Y37.62015
G01 X-65.63230 Y37.62589
G01 X-65.64159 Y37.62915
G01 X-65.67250 Y37.64083
G01 X-65.73964 Y37.66798
G01 X-65.76603 Y37.67923
G01 X-65.82490 Y37.70560
G01 X-65.89031 Y37.73826
G01 X-65.97835 Y37.78683
G01 X-66.00110 Y37.80103
G01 X-66.00349 Y37.80253
G01 X-66.00466 Y37.80461
G01 X-66.03524 Y37.90237
G01 X-66.04576 Y37.95472
G01 X-66.04192 Y37.96288
G01 X-66.04162 Y37.96351
G01 X-65.99727 Y38.05767
G01 X-65.91218 Y38.20118
G01 X-65.90329 Y38.21319
G01 X-65.87057 Y38.26122
G01 X-65.86849 Y38.26455
G01 X-65.80720 Y38.34842
G01 X-65.77804 Y38.38815
G01 X-65.74012 Y38.44555
G01 X-65.70311 Y38.50798
G01 X-65.66626 Y38.58391
G01 X-65.63923 Y38.64728
G01 X-65.62645 Y38.68185
G01 X-65.59427 Y38.79754
G01 X-65.58241 Y38.84715
G01 X-65.57888 Y38.86595
G01 X-65.56483 Y39.02101
G01 X-65.56209 Y39.07029
G01 X-65.56184 Y39.08261
G01 X-65.56173 Y39.09023
G01 X-65.55325 Y39.19401
G01 X-65.53799 Y39.21583
G01 X-65.50156 Y39.26597
G01 X-65.42932 Y39.35063
G01 X-62.21478 Y42.56518
G01 X-62.19105 Y42.59007
G01 X-62.16799 Y42.61552
G01 X-62.14752 Y42.64310
G01 X-62.10927 Y42.70038
G01 X-62.09161 Y42.72982
G01 X-62.07693 Y42.76088
G01 X-62.05059 Y42.82449
G01 X-62.03903 Y42.85682
G01 X-62.03068 Y42.89015
G01 X-62.01724 Y42.95758
G01 X-62.01221 Y42.99162
G01 X-62.01051 Y43.02586
G01 X-62.00967 Y43.06030
G01 X-62.00967 Y43.31539
G01 X-62.00617 Y43.38550
G01 X-62.00223 Y43.42471
G01 X-61.95669 Y43.61750
G01 X-61.95194 Y43.63033
G01 X-61.90993 Y43.64953
G01 X-61.90360 Y43.65245
G01 X-61.79489 Y43.70325
G01 X-61.69311 Y43.76159
G01 X-61.63322 Y43.82149
G01 X-61.60675 Y43.86289
G01 X-61.58935 Y43.89405
G01 X-61.56289 Y43.98016
G01 X-61.56085 Y43.99761
G01 X-61.55969 Y44.03830
G01 X-61.55969 Y45.63832
G01 X-61.56085 Y45.67904
G01 X-61.56289 Y45.69649
G01 X-61.58935 Y45.78260
G01 X-61.63322 Y45.85514
G01 X-61.69311 Y45.91506
G01 X-61.80853 Y45.97960
G01 X-61.81358 Y45.98183
G01 X-61.90993 Y46.02395
G01 X-61.93431 Y46.03507
G01 X-61.99550 Y46.06413
G01 X-62.08585 Y46.12832
G01 X-62.11739 Y46.15072
G01 X-62.13835 Y46.20479
G01 X-62.15471 Y46.30591
G01 X-62.15811 Y46.36700
G01 X-62.15308 Y46.46928
G01 X-62.12692 Y46.56829
G01 X-62.08074 Y46.65971
G01 X-62.04759 Y46.71114
G01 X-62.00096 Y46.77233
G01 X-61.94533 Y46.82549
G01 X-61.89903 Y46.86324
G01 X-61.83350 Y46.94363
G01 X-61.78547 Y47.03555
G01 X-61.75608 Y47.13830
G01 X-61.75153 Y47.18948
G01 X-61.75153 Y47.28572
G01 X-61.77155 Y47.28572
G01 X-61.77155 Y47.22572
G01 X-61.78094 Y47.13012
G01 X-61.80883 Y47.03819
G01 X-61.85412 Y46.95348
G01 X-61.91506 Y46.87924
G01 X-61.98930 Y46.81828
G01 X-62.07401 Y46.77302
G01 X-62.16593 Y46.74513
G01 X-62.26154 Y46.73571
G01 X-63.22737 Y46.73571
G01 X-63.36154 Y46.86984
G01 X-63.53946 Y47.22572
G01 X-63.53946 Y49.02572
G01 X-63.50240 Y49.18815
G01 X-63.47507 Y49.20939
G01 X-63.43962 Y49.23474
G01 X-63.39151 Y49.26496
G01 X-63.36154 Y49.28150
G01 X-63.34284 Y49.29227
G01 X-63.28892 Y49.32457
G01 X-63.22631 Y49.36656
G01 X-63.21251 Y49.37677
G01 X-63.20116 Y49.41528
G01 X-63.18904 Y49.46234
G01 X-63.18686 Y49.48261
G01 X-63.18244 Y49.52976
G01 X-63.18211 Y49.53631
G01 X-63.18127 Y49.57073
G01 X-63.18127 Y50.82074
G01 X-63.18211 Y50.85513
G01 X-63.18244 Y50.86155
G01 X-63.18686 Y50.90882
G01 X-63.18907 Y50.92914
G01 X-63.20116 Y50.97616
G01 X-63.21597 Y51.02638
G01 X-63.21640 Y51.02787
G01 X-63.23606 Y51.09513
G01 X-63.24706 Y51.13732
G01 X-63.24973 Y51.14898
G01 X-63.26303 Y51.19920
G01 X-63.27088 Y51.22533
G01 X-63.28600 Y51.28264
G01 X-63.29115 Y51.30511
G01 X-63.23781 Y51.35503
G01 X-63.17723 Y51.40730
G01 X-63.16847 Y51.41474
G01 X-63.12351 Y51.45236
G01 X-63.12052 Y51.45487
G01 X-63.06977 Y51.49782
G01 X-63.04388 Y51.51870
G01 X-63.01765 Y51.54248
G01 X-62.99275 Y51.56620
G01 X-62.74117 Y51.81779
G01 X-62.71747 Y51.84268
G01 X-62.69433 Y51.86821
G01 X-62.67393 Y51.89572
G01 X-62.63565 Y51.95299
G01 X-62.61800 Y51.98243
G01 X-62.60332 Y52.01350
G01 X-62.57698 Y52.07710
G01 X-62.56542 Y52.10941
G01 X-62.55707 Y52.14276
G01 X-62.54366 Y52.21019
G01 X-62.53860 Y52.24420
G01 X-62.53693 Y52.27847
G01 X-62.53609 Y52.31294
G01 X-62.53609 Y59.42514
G01 X-62.53139 Y59.50622
G01 X-62.52616 Y59.55148
G01 X-62.49507 Y59.69494
G01 X-62.48242 Y59.70373
G01 X-62.44170 Y59.73017
G01 X-62.43962 Y59.73141
G01 X-62.38948 Y59.76464
G01 X-62.37917 Y59.77208
G01 X-62.33827 Y59.79951
G01 X-62.31493 Y59.81404
G01 X-62.28183 Y59.83949
G01 X-62.24391 Y59.87053
G01 X-62.22120 Y59.88993
G01 X-62.21780 Y59.89298
G01 X-62.19527 Y59.91917
G01 X-62.16423 Y59.95712
G01 X-62.16164 Y59.96029
G01 X-62.14084 Y59.98737
G01 X-62.12595 Y60.01414
G01 X-62.10304 Y60.05747
G01 X-62.08447 Y60.09529
G01 X-62.07640 Y60.12095
G01 X-62.06253 Y60.16794
G01 X-62.05052 Y60.21452
G01 X-62.04825 Y60.23532
G01 X-62.04417 Y60.27914
G01 X-62.04391 Y60.28412
G01 X-62.04307 Y60.31853
G01 X-62.04307 Y61.76854
G01 X-62.04391 Y61.80293
G01 X-62.04417 Y61.80809
G01 X-62.04825 Y61.85173
G01 X-62.05052 Y61.87251
G01 X-62.06253 Y61.91911
G01 X-62.07640 Y61.96610
G01 X-62.08447 Y61.99176
G01 X-62.10304 Y62.02955
G01 X-62.12595 Y62.07291
G01 X-62.14086 Y62.09968
G01 X-62.16423 Y62.12993
G01 X-62.19527 Y62.16786
G01 X-62.21780 Y62.19407
G01 X-62.24391 Y62.21652
G01 X-62.28183 Y62.24756
G01 X-62.31216 Y62.27101
G01 X-62.33908 Y62.28599
G01 X-62.38242 Y62.30888
G01 X-62.42009 Y62.32737
G01 X-62.44574 Y62.33545
G01 X-62.49273 Y62.34931
G01 X-62.53934 Y62.36133
G01 X-62.55448 Y62.36303
G01 X-62.56012 Y62.36359
G01 X-62.60378 Y62.36768
G01 X-62.60891 Y62.36793
G01 X-62.64333 Y62.36877
G01 X-63.84332 Y62.36877
G01 X-63.87774 Y62.36793
G01 X-63.88285 Y62.36768
G01 X-63.92653 Y62.36359
G01 X-63.94287 Y62.36186
G01 X-63.94734 Y62.36133
G01 X-63.99392 Y62.34931
G01 X-64.04091 Y62.33545
G01 X-64.06654 Y62.32737
G01 X-64.10423 Y62.30888
G01 X-64.14756 Y62.28599
G01 X-64.17449 Y62.27101
G01 X-64.20482 Y62.24756
G01 X-64.24274 Y62.21652
G01 X-64.26885 Y62.19407
G01 X-64.29138 Y62.16786
G01 X-64.31576 Y62.13806
G01 X-64.32247 Y62.12998
G01 X-64.36319 Y62.08167
G01 X-64.36748 Y62.07654
G01 X-64.38975 Y62.04962
G01 X-64.39953 Y62.03806
G01 X-64.45092 Y61.97845
G01 X-64.48767 Y61.93839
G01 X-64.54685 Y61.87759
G01 X-64.56014 Y61.86372
G01 X-64.57822 Y61.84451
G01 X-64.58000 Y61.82602
G01 X-64.57807 Y61.81624
G01 X-64.56735 Y61.76852
G01 X-64.55280 Y61.71043
G01 X-64.53517 Y61.62204
G01 X-64.51045 Y61.45541
G01 X-64.50248 Y61.37446
G01 X-64.49430 Y61.20784
G01 X-64.49333 Y61.16854
G01 X-64.49333 Y60.91853
G01 X-64.49430 Y60.87921
G01 X-64.50248 Y60.71259
G01 X-64.51045 Y60.63164
G01 X-64.53517 Y60.46501
G01 X-64.55280 Y60.37662
G01 X-64.56735 Y60.31851
G01 X-64.57807 Y60.27081
G01 X-64.58002 Y60.26090
G01 X-64.57616 Y60.22171
G01 X-64.55744 Y60.12750
G01 X-64.54322 Y60.08061
G01 X-64.50644 Y59.99186
G01 X-64.48335 Y59.94863
G01 X-64.42999 Y59.86878
G01 X-64.40210 Y59.83479
G01 X-64.39890 Y59.83088
G01 X-64.33098 Y59.76296
G01 X-64.29308 Y59.73187
G01 X-64.21322 Y59.67850
G01 X-64.16999 Y59.65539
G01 X-64.08125 Y59.61864
G01 X-64.07632 Y59.61714
G01 X-64.07629 Y54.95131
G01 X-63.83631 Y54.71133
G01 X-63.71132 Y54.46132
G01 X-63.71132 Y52.66132
G01 X-63.73276 Y52.55779
G01 X-63.83631 Y52.53633
G01 X-64.36100 Y52.53633
G01 X-64.37327 Y52.53605
G01 X-64.44190 Y52.53267
G01 X-64.46733 Y52.53016
G01 X-64.53596 Y52.51997
G01 X-64.56420 Y52.51433
G01 X-64.63281 Y52.49716
G01 X-64.66600 Y52.48708
G01 X-64.73461 Y52.46252
G01 X-64.75447 Y52.45485
G01 X-64.93631 Y52.37951
G01 X-64.99224 Y52.35937
G01 X-64.99714 Y52.34900
G01 X-65.02552 Y52.29584
G01 X-65.06189 Y52.23516
G01 X-65.09110 Y52.19140
G01 X-65.13240 Y52.13567
G01 X-65.16313 Y52.09823
G01 X-65.20926 Y52.04733
G01 X-65.22546 Y52.03031
G01 X-65.76826 Y51.48754
G01 X-65.78447 Y51.47052
G01 X-65.83059 Y51.41962
G01 X-65.86133 Y51.38218
G01 X-65.90263 Y51.32645
G01 X-65.93184 Y51.28269
G01 X-65.96821 Y51.22201
G01 X-65.99658 Y51.16882
G01 X-66.02775 Y51.10293
G01 X-66.04200 Y51.07077
G01 X-66.18157 Y50.73382
G01 X-66.18157 Y49.26207
G01 X-66.18754 Y49.24583
G01 X-66.20679 Y49.19194
G01 X-66.23308 Y49.10558
G01 X-66.24660 Y49.05165
G01 X-66.26250 Y48.97179
G01 X-66.27052 Y48.91790
G01 X-66.27799 Y48.84197
G01 X-66.28066 Y48.78808
G01 X-66.28155 Y48.75074
G01 X-66.28155 Y47.50073
G01 X-66.28066 Y47.46336
G01 X-66.27799 Y47.40947
G01 X-66.27052 Y47.33355
G01 X-66.26250 Y47.27965
G01 X-66.24660 Y47.19979
G01 X-66.23308 Y47.14586
G01 X-66.20677 Y47.05938
G01 X-66.18749 Y47.00548
G01 X-66.17159 Y46.96723
G01 X-66.13184 Y46.92748
G01 X-66.09018 Y46.89329
G01 X-66.01030 Y46.83992
G01 X-65.96275 Y46.81450
G01 X-65.87400 Y46.77774
G01 X-65.82242 Y46.76210
G01 X-65.72821 Y46.74335
G01 X-65.67456 Y46.73807
G01 X-65.62653 Y46.73571
G01 X-65.07654 Y46.73571
G01 X-65.02851 Y46.73807
G01 X-64.97487 Y46.74335
G01 X-64.90741 Y46.75679
G01 X-64.88668 Y46.78193
G01 X-64.84670 Y46.83586
G01 X-64.79389 Y46.91457
G01 X-64.76158 Y46.96850
G01 X-64.72719 Y47.03261
G01 X-64.70169 Y47.08653
G01 X-64.67949 Y47.14000
G01 X-64.66019 Y47.19390
G01 X-64.64617 Y47.24007
G01 X-64.63265 Y47.29400
G01 X-64.62437 Y47.33540
G01 X-64.61640 Y47.38932
G01 X-64.61256 Y47.42793
G01 X-64.60992 Y47.48186
G01 X-64.60946 Y47.50073
G01 X-64.60946 Y48.75074
G01 X-64.60992 Y48.76958
G01 X-64.61256 Y48.82351
G01 X-64.61640 Y48.86212
G01 X-64.62437 Y48.91604
G01 X-64.63265 Y48.95744
G01 X-64.64617 Y49.01137
G01 X-64.66016 Y49.05747
G01 X-64.67947 Y49.11137
G01 X-64.68968 Y49.13786
G01 X-64.70979 Y49.15521
G01 X-64.72333 Y49.16631
G01 X-64.72981 Y49.17172
G01 X-64.74741 Y49.21505
G01 X-64.76669 Y49.26895
G01 X-64.78028 Y49.31360
G01 X-64.79379 Y49.36753
G01 X-64.80177 Y49.40751
G01 X-64.80974 Y49.46140
G01 X-64.81343 Y49.49864
G01 X-64.81607 Y49.55254
G01 X-64.81652 Y49.57073
G01 X-64.81652 Y50.82074
G01 X-64.81607 Y50.83890
G01 X-64.81558 Y50.84880
G01 X-64.79562 Y50.89104
G01 X-64.77969 Y50.92091
G01 X-64.75112 Y50.96856
G01 X-64.73512 Y50.99254
G01 X-64.70263 Y51.03633
G01 X-64.68620 Y51.05637
G01 X-64.64995 Y51.09638
G01 X-64.63217 Y51.11416
G01 X-64.59217 Y51.15040
G01 X-64.57213 Y51.16684
G01 X-64.52834 Y51.19932
G01 X-64.50436 Y51.21533
G01 X-64.45671 Y51.24390
G01 X-64.42684 Y51.25983
G01 X-64.37510 Y51.28429
G01 X-64.35653 Y51.29252
G01 X-64.08851 Y51.40354
G01 X-63.80652 Y51.40354
G01 X-63.77629 Y51.40280
G01 X-63.72239 Y51.40016
G01 X-63.66080 Y51.39407
G01 X-63.60690 Y51.38606
G01 X-63.54180 Y51.37308
G01 X-63.48788 Y51.35957
G01 X-63.45237 Y51.35068
G01 X-63.41508 Y51.34037
G01 X-63.38137 Y51.33013
G01 X-63.35902 Y51.32371
G01 X-63.29466 Y51.30608
G01 X-63.29115 Y51.30511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.75153 Y48.96572 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.75153 Y48.96572
G01 X-61.77155 Y48.96572
G01 X-61.77155 Y49.02572
G01 X-61.78094 Y49.12130
G01 X-61.80883 Y49.21322
G01 X-61.85412 Y49.29793
G01 X-61.91506 Y49.37220
G01 X-61.97152 Y49.41853
G01 X-61.97152 Y49.44731
G01 X-61.89903 Y49.38820
G01 X-61.83350 Y49.30781
G01 X-61.78547 Y49.21589
G01 X-61.75608 Y49.11315
G01 X-61.75153 Y49.06196
G01 X-61.75153 Y48.96572
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.22737 Y46.73571 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.22737 Y46.73571
G01 X-63.22742 Y46.12832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.99550 Y46.06413 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.99550 Y46.06413
G01 X-62.08582 Y46.12832
G01 X-63.22742 Y46.12832
G01 X-63.33492 Y46.02082
G01 X-63.37076 Y45.98666
G01 X-63.43936 Y45.92448
G01 X-63.49108 Y45.88188
G01 X-63.50995 Y45.86789
G01 X-63.55569 Y45.82976
G01 X-63.58518 Y45.80200
G01 X-63.63146 Y45.74894
G01 X-63.65000 Y45.72265
G01 X-63.68409 Y45.66187
G01 X-63.69146 Y45.64490
G01 X-63.69428 Y45.63832
G01 X-63.98376 Y44.93942
G01 X-63.98107 Y44.88455
G01 X-63.98107 Y44.79207
G01 X-63.98879 Y44.63525
G01 X-63.99814 Y44.54059
G01 X-63.99994 Y44.52837
G01 X-63.99994 Y44.17384
G01 X-63.91173 Y44.03830
G01 X-63.90220 Y44.01879
G01 X-63.87121 Y43.96111
G01 X-63.81310 Y43.86286
G01 X-63.78663 Y43.82149
G01 X-63.70703 Y43.74478
G01 X-63.65447 Y43.70432
G01 X-63.63959 Y43.69406
G01 X-63.50995 Y43.60706
G01 X-63.49877 Y43.59947
G01 X-63.48711 Y43.51046
G01 X-63.48229 Y43.44925
G01 X-63.47970 Y43.37917
G01 X-63.57086 Y43.21582
G01 X-63.60728 Y43.16571
G01 X-63.67954 Y43.08100
G01 X-66.42323 Y40.33732
G01 X-66.44278 Y40.31850
G01 X-66.45421 Y40.30793
G01 X-66.56811 Y40.22193
G01 X-66.57621 Y40.21695
G01 X-66.62897 Y40.21123
G01 X-66.68012 Y40.20750
G01 X-66.74093 Y40.20524
G01 X-66.74918 Y40.20488
G01 X-66.80979 Y40.20191
G01 X-66.90519 Y40.18926
G01 X-66.97296 Y40.17687
G01 X-66.99729 Y40.17118
G01 X-67.12282 Y40.13061
G01 X-67.17745 Y40.11039
G01 X-67.18706 Y40.10534
G01 X-67.32518 Y40.03105
G01 X-67.34494 Y40.02002
G01 X-67.38210 Y39.99226
G01 X-67.49445 Y39.90244
G01 X-67.49821 Y39.89891
G01 X-67.50397 Y39.89353
G01 X-67.52381 Y39.87519
G01 X-67.53801 Y39.86170
G01 X-67.55424 Y39.84588
G01 X-67.63389 Y39.77852
G01 X-67.65850 Y39.77420
G01 X-67.71967 Y39.76452
G01 X-67.83059 Y39.75573
G01 X-68.47938 Y39.75573
G01 X-68.54928 Y39.75921
G01 X-68.58848 Y39.76313
G01 X-68.78159 Y39.80874
G01 X-68.79432 Y39.81347
G01 X-68.81352 Y39.85548
G01 X-68.81652 Y39.86193
G01 X-68.86724 Y39.97044
G01 X-68.92561 Y40.07227
G01 X-68.98553 Y40.13219
G01 X-69.05805 Y40.17605
G01 X-69.14415 Y40.20250
G01 X-69.16160 Y40.20453
G01 X-69.20232 Y40.20572
G01 X-70.80234 Y40.20572
G01 X-70.84303 Y40.20453
G01 X-70.86053 Y40.20250
G01 X-70.94656 Y40.17605
G01 X-70.97125 Y40.16244
G01 X-71.01913 Y40.13219
G01 X-71.07905 Y40.07227
G01 X-71.13739 Y39.97052
G01 X-71.16856 Y39.90379
G01 X-71.18514 Y39.86574
G01 X-71.18931 Y39.85545
G01 X-71.20851 Y39.81167
G01 X-71.35321 Y39.77420
G01 X-71.41440 Y39.76452
G01 X-71.52527 Y39.75573
G01 X-71.66779 Y39.75573
G01 X-71.70224 Y39.75490
G01 X-71.73647 Y39.75319
G01 X-71.77051 Y39.74817
G01 X-71.83795 Y39.73473
G01 X-71.87127 Y39.72640
G01 X-71.90361 Y39.71482
G01 X-71.96718 Y39.68848
G01 X-71.99827 Y39.67379
G01 X-72.02769 Y39.65614
G01 X-72.08499 Y39.61786
G01 X-72.11257 Y39.59742
G01 X-72.13802 Y39.57433
G01 X-72.16292 Y39.55063
G01 X-73.94887 Y37.76468
G01 X-73.97259 Y37.73979
G01 X-73.99565 Y37.71434
G01 X-74.01610 Y37.68675
G01 X-74.05438 Y37.62948
G01 X-74.07206 Y37.60001
G01 X-74.08674 Y37.56897
G01 X-74.09494 Y37.55094
G01 X-74.11305 Y37.50537
G01 X-74.12463 Y37.47304
G01 X-74.13296 Y37.43971
G01 X-74.14640 Y37.37225
G01 X-74.15143 Y37.33829
G01 X-74.15313 Y37.30395
G01 X-74.15354 Y37.29381
G01 X-74.15440 Y37.26953
G01 X-74.15616 Y37.23865
G01 X-74.15859 Y37.20766
G01 X-74.19367 Y37.03395
G01 X-74.21353 Y36.97278
G01 X-74.23167 Y36.92229
G01 X-74.43101 Y36.86308
G01 X-74.49220 Y36.85338
G01 X-74.60325 Y36.84459
G01 X-75.20025 Y36.84459
G01 X-75.22776 Y36.84512
G01 X-75.24330 Y36.84573
G01 X-75.37825 Y36.86400
G01 X-75.38318 Y36.86755
G01 X-75.43329 Y36.90397
G01 X-75.51790 Y36.97616
G01 X-79.90387 Y41.36213
G01 X-79.92876 Y41.38583
G01 X-79.95424 Y41.40892
G01 X-79.98180 Y41.42937
G01 X-80.03910 Y41.46764
G01 X-80.06851 Y41.48530
G01 X-80.09960 Y41.49998
G01 X-80.16318 Y41.52632
G01 X-80.19551 Y41.53787
G01 X-80.22884 Y41.54623
G01 X-80.29630 Y41.55964
G01 X-80.33029 Y41.56470
G01 X-80.36460 Y41.56637
G01 X-80.39904 Y41.56721
G01 X-88.50728 Y41.56721
G01 X-88.54231 Y41.56810
G01 X-88.56189 Y41.56909
G01 X-88.70378 Y41.59050
G01 X-88.70926 Y41.59508
G01 X-88.75696 Y41.63508
G01 X-88.78292 Y41.65794
G01 X-88.83390 Y41.70503
G01 X-88.83969 Y41.71042
G01 X-88.84343 Y41.71395
G01 X-88.95577 Y41.80376
G01 X-88.99296 Y41.83152
G01 X-89.01272 Y41.84255
G01 X-89.15084 Y41.91684
G01 X-89.16042 Y41.92190
G01 X-89.21508 Y41.94212
G01 X-89.34061 Y41.98268
G01 X-89.36494 Y41.98837
G01 X-89.43268 Y42.00076
G01 X-89.52811 Y42.01341
G01 X-89.58871 Y42.01639
G01 X-89.59699 Y42.01674
G01 X-89.62450 Y42.01776
G01 X-89.64005 Y42.01816
G01 X-89.65772 Y42.01844
G01 X-89.76197 Y42.02756
G01 X-89.77992 Y42.04021
G01 X-89.83004 Y42.07663
G01 X-89.91465 Y42.14882
G01 X-94.44253 Y46.67670
G01 X-94.45952 Y46.69430
G01 X-94.46902 Y46.70449
G01 X-94.55347 Y46.81488
G01 X-94.58672 Y46.86814
G01 X-94.69211 Y47.12389
G01 X-94.69391 Y47.12826
G01 X-94.69233 Y47.13634
G01 X-94.67440 Y47.19484
G01 X-94.67293 Y47.19829
G01 X-94.67158 Y47.19933
G01 X-94.65627 Y47.21129
G01 X-94.50821 Y47.30776
G01 X-94.43844 Y47.34431
G01 X-94.42975 Y47.34879
G01 X-94.37435 Y47.37693
G01 X-94.29488 Y47.41142
G01 X-94.27110 Y47.42008
G01 X-94.24042 Y47.43205
G01 X-94.23087 Y47.43710
G01 X-94.09277 Y47.51137
G01 X-94.07296 Y47.52244
G01 X-94.03577 Y47.55018
G01 X-93.92343 Y47.63997
G01 X-93.91393 Y47.64896
G01 X-93.86620 Y47.69870
G01 X-93.78652 Y47.79036
G01 X-93.76351 Y47.81731
G01 X-93.71583 Y47.87037
G01 X-93.71098 Y47.87573
G01 X-93.66831 Y47.92234
G01 X-93.60173 Y47.98721
G01 X-93.53056 Y48.04929
G01 X-93.47987 Y48.08894
G01 X-93.43460 Y48.09140
G01 X-93.38642 Y48.08899
G01 X-93.37392 Y48.07924
G01 X-93.33686 Y48.04901
G01 X-93.26435 Y47.98724
G01 X-93.16557 Y47.88757
G01 X-93.15119 Y47.87022
G01 X-93.15099 Y47.86999
G01 X-93.10298 Y47.81711
G01 X-93.00003 Y47.69870
G01 X-92.95233 Y47.64896
G01 X-92.94283 Y47.64000
G01 X-92.83051 Y47.55021
G01 X-92.79330 Y47.52244
G01 X-92.77347 Y47.51135
G01 X-92.63534 Y47.43708
G01 X-92.62587 Y47.43207
G01 X-92.57123 Y47.41188
G01 X-92.44565 Y47.37129
G01 X-92.42140 Y47.36560
G01 X-92.35358 Y47.35320
G01 X-92.25810 Y47.34053
G01 X-92.19752 Y47.33756
G01 X-92.12871 Y47.33756
G01 X-92.06813 Y47.34053
G01 X-91.97268 Y47.35320
G01 X-91.90489 Y47.36560
G01 X-91.88061 Y47.37129
G01 X-91.75503 Y47.41188
G01 X-91.70039 Y47.43207
G01 X-91.69087 Y47.43710
G01 X-91.55277 Y47.51137
G01 X-91.53296 Y47.52244
G01 X-91.49577 Y47.55018
G01 X-91.38343 Y47.63997
G01 X-91.37393 Y47.64896
G01 X-91.32620 Y47.69870
G01 X-91.24652 Y47.79036
G01 X-91.22351 Y47.81731
G01 X-91.17583 Y47.87037
G01 X-91.17098 Y47.87573
G01 X-91.12831 Y47.92234
G01 X-91.06173 Y47.98721
G01 X-90.99056 Y48.04929
G01 X-90.93987 Y48.08894
G01 X-90.89460 Y48.09140
G01 X-90.84642 Y48.08899
G01 X-90.83392 Y48.07924
G01 X-90.79686 Y48.04901
G01 X-90.72435 Y47.98724
G01 X-90.62557 Y47.88757
G01 X-90.61119 Y47.87022
G01 X-90.61099 Y47.86999
G01 X-90.56298 Y47.81711
G01 X-90.46003 Y47.69870
G01 X-90.41233 Y47.64896
G01 X-90.40283 Y47.64000
G01 X-90.29051 Y47.55021
G01 X-90.25330 Y47.52244
G01 X-90.23347 Y47.51135
G01 X-90.09534 Y47.43708
G01 X-90.08587 Y47.43207
G01 X-90.03123 Y47.41188
G01 X-89.90565 Y47.37129
G01 X-89.88140 Y47.36560
G01 X-89.81358 Y47.35320
G01 X-89.71810 Y47.34053
G01 X-89.65752 Y47.33756
G01 X-89.58871 Y47.33756
G01 X-89.52813 Y47.34053
G01 X-89.43268 Y47.35320
G01 X-89.36489 Y47.36560
G01 X-89.34061 Y47.37129
G01 X-89.21503 Y47.41188
G01 X-89.16039 Y47.43207
G01 X-89.15087 Y47.43710
G01 X-89.01277 Y47.51137
G01 X-88.99296 Y47.52244
G01 X-88.95577 Y47.55018
G01 X-88.84343 Y47.64000
G01 X-88.83393 Y47.64896
G01 X-88.78620 Y47.69870
G01 X-88.71523 Y47.78033
G01 X-88.68638 Y47.81965
G01 X-88.64843 Y47.87711
G01 X-88.61147 Y47.93949
G01 X-88.57459 Y48.01546
G01 X-88.54759 Y48.07873
G01 X-88.53482 Y48.11338
G01 X-88.50263 Y48.22900
G01 X-88.49852 Y48.24444
G01 X-88.48742 Y48.29636
G01 X-88.48724 Y48.29745
G01 X-88.47317 Y48.45252
G01 X-88.47091 Y48.48698
G01 X-88.47317 Y48.52143
G01 X-88.48724 Y48.67652
G01 X-88.48742 Y48.67761
G01 X-88.50263 Y48.74497
G01 X-88.53433 Y48.85889
G01 X-88.53479 Y48.86052
G01 X-88.54762 Y48.89521
G01 X-88.57459 Y48.95848
G01 X-88.61147 Y49.03446
G01 X-88.64843 Y49.09684
G01 X-88.68638 Y49.15429
G01 X-88.71523 Y49.19361
G01 X-88.78620 Y49.27525
G01 X-88.80444 Y49.29542
G01 X-88.81792 Y49.30979
G01 X-88.82585 Y49.31807
G01 X-88.83332 Y49.32574
G01 X-88.90058 Y49.40583
G01 X-88.90441 Y49.42785
G01 X-88.91409 Y49.48904
G01 X-88.92288 Y49.59994
G01 X-88.92288 Y49.77017
G01 X-88.91455 Y49.87814
G01 X-88.90535 Y49.93778
G01 X-88.86720 Y50.08607
G01 X-88.80538 Y50.11579
G01 X-88.77995 Y50.12673
G01 X-88.73682 Y50.14693
G01 X-88.72361 Y50.15363
G01 X-88.62003 Y50.19643
G01 X-88.59080 Y50.20588
G01 X-88.53621 Y50.22605
G01 X-88.52666 Y50.23110
G01 X-88.38856 Y50.30537
G01 X-88.36870 Y50.31647
G01 X-88.33156 Y50.34418
G01 X-88.29748 Y50.37146
G01 X-88.21922 Y50.43400
G01 X-88.20972 Y50.44296
G01 X-88.16199 Y50.49270
G01 X-88.09103 Y50.57433
G01 X-88.06217 Y50.61365
G01 X-88.02422 Y50.67111
G01 X-87.98727 Y50.73349
G01 X-87.95039 Y50.80946
G01 X-87.92339 Y50.87278
G01 X-87.91061 Y50.90735
G01 X-87.87937 Y51.01975
G01 X-87.87843 Y51.02305
G01 X-87.86324 Y51.09028
G01 X-87.86306 Y51.09142
G01 X-87.84899 Y51.24647
G01 X-87.84670 Y51.28098
G01 X-87.84896 Y51.31548
G01 X-87.86304 Y51.47052
G01 X-87.86324 Y51.47166
G01 X-87.87843 Y51.53892
G01 X-87.91061 Y51.65459
G01 X-87.92339 Y51.68916
G01 X-87.95039 Y51.75248
G01 X-87.98727 Y51.82846
G01 X-88.02422 Y51.89084
G01 X-88.05793 Y51.94243
G01 X-88.06217 Y51.94829
G01 X-88.09103 Y51.98764
G01 X-88.16199 Y52.06925
G01 X-88.20972 Y52.11898
G01 X-88.21922 Y52.12795
G01 X-88.33156 Y52.21776
G01 X-88.36875 Y52.24552
G01 X-88.38851 Y52.25655
G01 X-88.52664 Y52.33084
G01 X-88.53621 Y52.33590
G01 X-88.59087 Y52.35612
G01 X-88.71640 Y52.39668
G01 X-88.74073 Y52.40237
G01 X-88.80848 Y52.41476
G01 X-88.90390 Y52.42741
G01 X-88.96453 Y52.43039
G01 X-89.03334 Y52.43039
G01 X-89.09395 Y52.42741
G01 X-89.18937 Y52.41476
G01 X-89.25712 Y52.40237
G01 X-89.28145 Y52.39668
G01 X-89.40698 Y52.35612
G01 X-89.46164 Y52.33590
G01 X-89.47121 Y52.33084
G01 X-89.60934 Y52.25655
G01 X-89.62907 Y52.24552
G01 X-89.66628 Y52.21776
G01 X-89.74744 Y52.15289
G01 X-89.77865 Y52.12795
G01 X-89.78813 Y52.11898
G01 X-89.83585 Y52.06925
G01 X-89.90682 Y51.98761
G01 X-89.93568 Y51.94829
G01 X-89.97362 Y51.89084
G01 X-90.01058 Y51.82846
G01 X-90.04746 Y51.75248
G01 X-90.07446 Y51.68916
G01 X-90.08792 Y51.65274
G01 X-90.09031 Y51.64497
G01 X-90.09422 Y51.63247
G01 X-90.12958 Y51.54202
G01 X-90.14693 Y51.50511
G01 X-90.16064 Y51.47425
G01 X-90.17223 Y51.44654
G01 X-90.23552 Y51.32404
G01 X-90.28513 Y51.24357
G01 X-90.28513 Y51.24354
G01 X-90.28658 Y51.24123
G01 X-90.28658 Y51.23293
G01 X-90.28101 Y51.17654
G01 X-90.29290 Y51.16206
G01 X-90.34627 Y51.08218
G01 X-90.37863 Y51.02168
G01 X-90.41538 Y50.93293
G01 X-90.43529 Y50.86729
G01 X-90.45404 Y50.77309
G01 X-90.46075 Y50.70479
G01 X-90.46311 Y50.65675
G01 X-90.46311 Y49.46143
G01 X-90.49968 Y49.43143
G01 X-90.56760 Y49.36351
G01 X-90.66709 Y49.24228
G01 X-90.72046 Y49.16240
G01 X-90.79437 Y49.02409
G01 X-90.83115 Y48.93535
G01 X-90.87667 Y48.78528
G01 X-90.89313 Y48.70238
G01 X-90.89313 Y48.27136
G01 X-90.87667 Y48.18866
G01 X-90.84642 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.93987 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.93987 Y48.08894
G01 X-90.90961 Y48.18866
G01 X-90.89313 Y48.27136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.89313 Y48.70238 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.89313 Y48.70238
G01 X-90.90961 Y48.78528
G01 X-90.95513 Y48.93535
G01 X-90.99188 Y49.02409
G01 X-91.06582 Y49.16240
G01 X-91.11919 Y49.24228
G01 X-91.13811 Y49.26534
G01 X-91.21868 Y49.36351
G01 X-91.28660 Y49.43143
G01 X-91.32313 Y49.46140
G01 X-91.32313 Y50.21596
G01 X-91.29163 Y50.23702
G01 X-91.17040 Y50.33651
G01 X-91.10248 Y50.40443
G01 X-91.00298 Y50.52566
G01 X-90.94962 Y50.60552
G01 X-90.87568 Y50.74383
G01 X-90.83893 Y50.83257
G01 X-90.79341 Y50.98266
G01 X-90.77466 Y51.07687
G01 X-90.75930 Y51.23293
G01 X-90.75930 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.28513 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.28513 Y51.24354
G01 X-90.34975 Y51.21977
G01 X-90.40906 Y51.20473
G01 X-90.51053 Y51.19008
G01 X-90.61282 Y51.19683
G01 X-90.71149 Y51.22475
G01 X-90.75846 Y51.24357
G01 X-90.75930 Y51.24489
G01 X-90.76542 Y51.25472
G01 X-90.80967 Y51.32409
G01 X-90.88675 Y51.47410
G01 X-90.89902 Y51.50539
G01 X-90.91477 Y51.54248
G01 X-90.92374 Y51.56214
G01 X-90.95795 Y51.65284
G01 X-90.97139 Y51.68916
G01 X-90.99839 Y51.75248
G01 X-91.03527 Y51.82846
G01 X-91.07222 Y51.89084
G01 X-91.10593 Y51.94243
G01 X-91.11017 Y51.94829
G01 X-91.13903 Y51.98764
G01 X-91.20999 Y52.06925
G01 X-91.25772 Y52.11898
G01 X-91.26722 Y52.12795
G01 X-91.37956 Y52.21776
G01 X-91.41675 Y52.24552
G01 X-91.43651 Y52.25655
G01 X-91.57464 Y52.33084
G01 X-91.58421 Y52.33590
G01 X-91.63887 Y52.35612
G01 X-91.76440 Y52.39668
G01 X-91.78873 Y52.40237
G01 X-91.85648 Y52.41476
G01 X-91.95190 Y52.42741
G01 X-92.01253 Y52.43039
G01 X-92.08134 Y52.43039
G01 X-92.14195 Y52.42741
G01 X-92.23737 Y52.41476
G01 X-92.30512 Y52.40237
G01 X-92.32945 Y52.39668
G01 X-92.45498 Y52.35612
G01 X-92.50964 Y52.33590
G01 X-92.51921 Y52.33084
G01 X-92.65734 Y52.25655
G01 X-92.67707 Y52.24552
G01 X-92.71428 Y52.21776
G01 X-92.79544 Y52.15289
G01 X-92.82665 Y52.12795
G01 X-92.83613 Y52.11898
G01 X-92.88385 Y52.06925
G01 X-92.95482 Y51.98761
G01 X-92.98368 Y51.94829
G01 X-93.02162 Y51.89084
G01 X-93.05858 Y51.82846
G01 X-93.09546 Y51.75248
G01 X-93.12246 Y51.68916
G01 X-93.13592 Y51.65274
G01 X-93.13831 Y51.64497
G01 X-93.14222 Y51.63247
G01 X-93.17758 Y51.54202
G01 X-93.19493 Y51.50511
G01 X-93.20864 Y51.47425
G01 X-93.22023 Y51.44654
G01 X-93.28352 Y51.32404
G01 X-93.33313 Y51.24357
G01 X-93.33313 Y51.24354
G01 X-93.33458 Y51.24123
G01 X-93.33458 Y51.23293
G01 X-93.31921 Y51.07687
G01 X-93.30047 Y50.98266
G01 X-93.27463 Y50.89750
G01 X-93.25495 Y50.83257
G01 X-93.21819 Y50.74383
G01 X-93.14426 Y50.60552
G01 X-93.09089 Y50.52566
G01 X-93.00311 Y50.41871
G01 X-93.00311 Y49.46143
G01 X-93.03968 Y49.43143
G01 X-93.10760 Y49.36351
G01 X-93.20709 Y49.24228
G01 X-93.26046 Y49.16240
G01 X-93.33437 Y49.02409
G01 X-93.37115 Y48.93535
G01 X-93.41667 Y48.78528
G01 X-93.43313 Y48.70238
G01 X-93.43313 Y48.27136
G01 X-93.41667 Y48.18866
G01 X-93.38642 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.47987 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.47987 Y48.08894
G01 X-93.44961 Y48.18866
G01 X-93.43313 Y48.27136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.43313 Y48.70238 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.43313 Y48.70238
G01 X-93.44961 Y48.78528
G01 X-93.49513 Y48.93535
G01 X-93.53188 Y49.02409
G01 X-93.60582 Y49.16240
G01 X-93.65919 Y49.24228
G01 X-93.67811 Y49.26534
G01 X-93.75868 Y49.36351
G01 X-93.82660 Y49.43143
G01 X-93.86313 Y49.46140
G01 X-93.86313 Y50.88916
G01 X-93.86404 Y50.90804
G01 X-93.84141 Y50.98266
G01 X-93.82266 Y51.07687
G01 X-93.80730 Y51.23293
G01 X-93.80730 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.38113 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.38113 Y51.24354
G01 X-96.44575 Y51.21977
G01 X-96.50506 Y51.20473
G01 X-96.60653 Y51.19008
G01 X-96.70882 Y51.19683
G01 X-96.80749 Y51.22475
G01 X-96.85446 Y51.24357
G01 X-96.85530 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.95311 Y48.79699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.95311 Y48.79699
G01 X-95.95314 Y49.28696
G01 X-95.96256 Y49.38256
G01 X-95.99043 Y49.47449
G01 X-96.03018 Y49.54881
G01 X-96.03572 Y49.55919
G01 X-96.09665 Y49.63344
G01 X-96.17092 Y49.69437
G01 X-96.25563 Y49.73966
G01 X-96.34755 Y49.76755
G01 X-96.40313 Y49.77301
G01 X-96.40313 Y50.38116
G01 X-96.40549 Y50.42920
G01 X-96.41219 Y50.49750
G01 X-96.43094 Y50.59170
G01 X-96.45085 Y50.65736
G01 X-96.48763 Y50.74611
G01 X-96.51997 Y50.80661
G01 X-96.57333 Y50.88650
G01 X-96.61687 Y50.93953
G01 X-96.64915 Y50.97514
G01 X-96.85992 Y51.18591
G01 X-96.85530 Y51.23293
G01 X-96.85530 Y51.24489
G01 X-96.86142 Y51.25472
G01 X-96.90567 Y51.32409
G01 X-96.98275 Y51.47410
G01 X-96.99502 Y51.50539
G01 X-97.01077 Y51.54248
G01 X-97.01974 Y51.56214
G01 X-97.05395 Y51.65284
G01 X-97.06739 Y51.68916
G01 X-97.09439 Y51.75248
G01 X-97.13127 Y51.82846
G01 X-97.16823 Y51.89084
G01 X-97.20193 Y51.94243
G01 X-97.20617 Y51.94829
G01 X-97.23503 Y51.98764
G01 X-97.30599 Y52.06925
G01 X-97.35372 Y52.11898
G01 X-97.36322 Y52.12795
G01 X-97.47556 Y52.21776
G01 X-97.51275 Y52.24552
G01 X-97.53251 Y52.25655
G01 X-97.67064 Y52.33084
G01 X-97.68021 Y52.33590
G01 X-97.73487 Y52.35612
G01 X-97.86040 Y52.39668
G01 X-97.88473 Y52.40237
G01 X-97.95248 Y52.41476
G01 X-98.04790 Y52.42741
G01 X-98.10853 Y52.43039
G01 X-98.17734 Y52.43039
G01 X-98.23795 Y52.42741
G01 X-98.33337 Y52.41476
G01 X-98.36566 Y52.40971
G01 X-98.40139 Y52.40326
G01 X-98.44999 Y52.39622
G01 X-98.49753 Y52.39096
G01 X-98.56025 Y52.38662
G01 X-98.64376 Y52.38423
G01 X-98.74092 Y52.38632
G01 X-98.76548 Y52.38799
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.79883 Y54.80214 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.79883 Y54.80214
G01 X-98.73825 Y54.91082
G01 X-98.66428 Y54.94923
G01 X-98.56558 Y54.97648
G01 X-98.50523 Y54.98651
G01 X-98.42857 Y54.99312
G01 X-98.35181 Y54.98766
G01 X-98.24107 Y54.97097
G01 X-98.04475 Y54.97097
G01 X-98.02398 Y54.97409
G01 X-98.04785 Y54.99797
G01 X-98.09492 Y54.99332
G01 X-98.19096 Y54.99332
G01 X-98.34704 Y55.00869
G01 X-98.43114 Y55.02543
G01 X-98.44125 Y55.02743
G01 X-98.59134 Y55.07295
G01 X-98.68006 Y55.10973
G01 X-98.74910 Y55.14661
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.74915 Y57.41529 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.74915 Y57.41529
G01 X-98.74915 Y57.66116
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.58423 Y60.84670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.58423 Y60.84670
G01 X-96.32096 Y60.73834
G01 X-96.31842 Y60.73466
G01 X-96.28931 Y60.68084
G01 X-96.25027 Y60.58615
G01 X-96.23175 Y60.48541
G01 X-96.23460 Y60.38305
G01 X-96.24219 Y60.32595
G01 X-96.24478 Y60.32328
G01 X-96.24532 Y60.32275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.60326 Y58.22806 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.60326 Y58.22806
G01 X-94.61441 Y58.22014
G01 X-94.65911 Y58.14272
G01 X-94.69076 Y58.04528
G01 X-94.70148 Y57.94340
G01 X-94.70148 Y57.88222
G01 X-94.69960 Y57.86428
G01 X-94.93617 Y57.62768
G01 X-94.99988 Y57.56398
G01 X-95.04692 Y57.56860
G01 X-95.14296 Y57.56860
G01 X-95.29904 Y57.55324
G01 X-95.39325 Y57.53449
G01 X-95.54334 Y57.48897
G01 X-95.63206 Y57.45222
G01 X-95.77039 Y57.37828
G01 X-95.78550 Y57.36817
G01 X-95.85024 Y57.32491
G01 X-95.97148 Y57.22542
G01 X-96.03940 Y57.15750
G01 X-96.13889 Y57.03627
G01 X-96.19226 Y56.95641
G01 X-96.26619 Y56.81808
G01 X-96.30295 Y56.72936
G01 X-96.34847 Y56.57927
G01 X-96.36721 Y56.48506
G01 X-96.38258 Y56.32898
G01 X-96.38258 Y56.23294
G01 X-96.37795 Y56.18590
G01 X-96.61892 Y55.94491
G01 X-96.85992 Y56.18593
G01 X-96.85530 Y56.23294
G01 X-96.85530 Y56.32898
G01 X-96.85992 Y56.37605
G01 X-96.37242 Y56.86352
G01 X-96.35045 Y56.87389
G01 X-96.28182 Y56.92202
G01 X-96.25164 Y56.94729
G01 X-96.18314 Y57.01745
G01 X-96.04979 Y57.18468
G01 X-96.00671 Y57.24841
G01 X-95.97412 Y57.31806
G01 X-95.95263 Y57.37533
G01 X-95.92690 Y57.47442
G01 X-95.92228 Y57.57668
G01 X-95.93904 Y57.67767
G01 X-95.95530 Y57.73665
G01 X-95.97036 Y57.77508
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.97600 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.97600 Y54.97409
G01 X-94.99985 Y54.99794
G01 X-95.04692 Y54.99332
G01 X-95.14296 Y54.99332
G01 X-95.19000 Y54.99794
G01 X-95.21385 Y54.97409
G01 X-95.19310 Y54.97097
G01 X-94.99675 Y54.97097
G01 X-94.97600 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.32995 Y56.18590 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.32995 Y56.18590
G01 X-93.57092 Y55.94491
G01 X-93.81192 Y56.18593
G01 X-93.80730 Y56.23294
G01 X-93.80730 Y56.32898
G01 X-93.81192 Y56.37605
G01 X-93.57092 Y56.61704
G01 X-93.32995 Y56.37605
G01 X-93.33458 Y56.32898
G01 X-93.33458 Y56.23294
G01 X-93.32995 Y56.18590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-92.52848 Y58.22232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.52848 Y58.22232
G01 X-92.52465 Y58.21666
G01 X-92.47608 Y58.12639
G01 X-92.44733 Y58.02799
G01 X-92.43971 Y57.92575
G01 X-92.44156 Y57.86459
G01 X-92.44169 Y57.86370
G01 X-92.14197 Y57.56398
G01 X-92.09496 Y57.56860
G01 X-91.99892 Y57.56860
G01 X-91.95188 Y57.56398
G01 X-91.65160 Y57.86426
G01 X-91.65348 Y57.88222
G01 X-91.65348 Y57.94340
G01 X-91.64276 Y58.04528
G01 X-91.61111 Y58.14272
G01 X-91.56674 Y58.21958
G01 X-91.55526 Y58.22806
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.48048 Y58.22232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.48048 Y58.22232
G01 X-89.47665 Y58.21666
G01 X-89.42808 Y58.12639
G01 X-89.39933 Y58.02799
G01 X-89.39171 Y57.92575
G01 X-89.39356 Y57.86459
G01 X-89.39369 Y57.86370
G01 X-89.09397 Y57.56398
G01 X-89.04696 Y57.56860
G01 X-88.95092 Y57.56860
G01 X-88.90388 Y57.56398
G01 X-88.60360 Y57.86426
G01 X-88.60548 Y57.88222
G01 X-88.60548 Y57.94340
G01 X-88.59476 Y58.04528
G01 X-88.56311 Y58.14272
G01 X-88.51874 Y58.21958
G01 X-88.50726 Y58.22806
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.20356 Y60.02267 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.20356 Y60.02267
G01 X-84.19622 Y59.97967
G01 X-84.15522 Y59.93870
G01 X-84.12682 Y59.91538
G01 X-84.13988 Y59.90230
G01 X-84.23818 Y59.90230
G01 X-84.24859 Y59.89659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.07956 Y56.89261 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.07956 Y56.89261
G01 X-81.98317 Y56.91176
G01 X-81.91329 Y56.87140
G01 X-81.90839 Y56.86200
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.10598 Y52.22833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.10598 Y52.22833
G01 X-79.13649 Y52.23397
G01 X-79.15063 Y52.23635
G01 X-79.20286 Y52.24672
G01 X-79.23458 Y52.25403
G01 X-79.28980 Y52.26468
G01 X-79.32592 Y52.27031
G01 X-79.38015 Y52.27666
G01 X-79.41111 Y52.27910
G01 X-79.46633 Y52.28126
G01 X-79.87593 Y52.28126
G01 X-79.91032 Y52.28213
G01 X-79.91693 Y52.28246
G01 X-79.96402 Y52.28685
G01 X-79.98431 Y52.28906
G01 X-80.02993 Y52.30074
G01 X-80.03151 Y52.30120
G01 X-80.08385 Y52.31436
G01 X-80.13940 Y52.32607
G01 X-80.15381 Y52.32927
G01 X-80.20113 Y52.34022
G01 X-80.20821 Y52.34182
G01 X-80.28954 Y52.35985
G01 X-80.32254 Y52.36656
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.02955 Y51.48815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.02955 Y51.48815
G01 X-81.02289 Y51.47842
G01 X-81.01215 Y51.46300
G01 X-80.98807 Y51.42919
G01 X-80.97296 Y51.40727
G01 X-80.94177 Y51.36054
G01 X-80.90913 Y51.31530
G01 X-80.87870 Y51.27626
G01 X-80.86595 Y51.25939
G01 X-80.84301 Y51.22975
G01 X-80.83260 Y51.21703
G01 X-80.80910 Y51.18665
G01 X-80.79429 Y51.16006
G01 X-80.76910 Y51.11238
G01 X-80.75040 Y51.07425
G01 X-80.74240 Y51.04888
G01 X-80.72716 Y50.99717
G01 X-80.71504 Y50.95007
G01 X-80.71286 Y50.92983
G01 X-80.70844 Y50.88271
G01 X-80.70811 Y50.87613
G01 X-80.70727 Y50.84172
G01 X-80.70727 Y49.59171
G01 X-80.70811 Y49.55732
G01 X-80.70844 Y49.55084
G01 X-80.71286 Y49.50362
G01 X-80.71507 Y49.48332
G01 X-80.72716 Y49.43628
G01 X-80.73851 Y49.39780
G01 X-80.75231 Y49.38757
G01 X-80.81492 Y49.34558
G01 X-80.86884 Y49.31327
G01 X-80.88754 Y49.30250
G01 X-80.91751 Y49.28597
G01 X-80.96562 Y49.25574
G01 X-81.00107 Y49.23039
G01 X-81.02840 Y49.20916
G01 X-81.06546 Y49.04675
G01 X-81.06546 Y47.24670
G01 X-80.88754 Y46.89082
G01 X-80.75340 Y46.75671
G01 X-79.78754 Y46.75671
G01 X-79.69193 Y46.76613
G01 X-79.60001 Y46.79402
G01 X-79.51530 Y46.83929
G01 X-79.44106 Y46.90022
G01 X-79.38012 Y46.97449
G01 X-79.33483 Y47.05920
G01 X-79.30694 Y47.15112
G01 X-79.29755 Y47.24670
G01 X-79.29755 Y49.04672
G01 X-79.30694 Y49.14230
G01 X-79.33483 Y49.23423
G01 X-79.38012 Y49.31894
G01 X-79.44106 Y49.39321
G01 X-79.49752 Y49.43954
G01 X-79.49752 Y49.51396
G01 X-79.47626 Y49.51304
G01 X-79.41512 Y49.51520
G01 X-79.31360 Y49.52953
G01 X-79.21726 Y49.56466
G01 X-79.16069 Y49.60009
G01 X-79.15681 Y49.60618
G01 X-79.14045 Y49.63194
G01 X-79.11063 Y49.69313
G01 X-79.03351 Y49.93550
G01 X-79.02488 Y49.99331
G01 X-79.01708 Y50.09793
G01 X-79.01708 Y51.83201
G01 X-79.02584 Y51.94293
G01 X-79.03552 Y52.00410
G01 X-79.10598 Y52.22833
G01 X-79.09595 Y52.24184
G01 X-79.04329 Y52.32038
G01 X-79.01098 Y52.37430
G01 X-78.97664 Y52.43831
G01 X-78.95114 Y52.49221
G01 X-78.92887 Y52.54588
G01 X-78.90956 Y52.59978
G01 X-78.89557 Y52.64588
G01 X-78.88205 Y52.69980
G01 X-78.87377 Y52.74121
G01 X-78.86580 Y52.79513
G01 X-78.86196 Y52.83374
G01 X-78.85932 Y52.88766
G01 X-78.85886 Y52.90651
G01 X-78.85886 Y54.15652
G01 X-78.85932 Y54.17539
G01 X-78.86196 Y54.22931
G01 X-78.86580 Y54.26792
G01 X-78.87377 Y54.32185
G01 X-78.88205 Y54.36325
G01 X-78.89557 Y54.41717
G01 X-78.90959 Y54.46335
G01 X-78.92889 Y54.51725
G01 X-78.93910 Y54.54367
G01 X-78.95912 Y54.56094
G01 X-78.97273 Y54.57211
G01 X-78.97921 Y54.57752
G01 X-78.99681 Y54.62086
G01 X-79.01609 Y54.67475
G01 X-79.02968 Y54.71941
G01 X-79.04319 Y54.77333
G01 X-79.05117 Y54.81331
G01 X-79.05914 Y54.86721
G01 X-79.06283 Y54.90445
G01 X-79.06547 Y54.95835
G01 X-79.06592 Y54.97651
G01 X-79.06592 Y56.22652
G01 X-79.06547 Y56.24470
G01 X-79.06283 Y56.29860
G01 X-79.05914 Y56.33584
G01 X-79.05117 Y56.38974
G01 X-79.04319 Y56.42972
G01 X-79.02968 Y56.48364
G01 X-79.01611 Y56.52822
G01 X-78.99846 Y56.57757
G01 X-78.99541 Y56.58095
G01 X-78.96034 Y56.61603
G01 X-78.92036 Y56.65225
G01 X-78.88114 Y56.68440
G01 X-78.83738 Y56.71686
G01 X-78.79211 Y56.74709
G01 X-78.74444 Y56.77566
G01 X-78.68995 Y56.80475
G01 X-78.63819 Y56.82923
G01 X-78.60593 Y56.84353
G01 X-78.24858 Y56.99154
G01 X-78.18620 Y57.05392
G01 X-77.60989 Y57.05392
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.24858 Y56.99154 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.24858 Y56.99154
G01 X-78.05594 Y56.99151
G01 X-78.00791 Y56.98915
G01 X-77.95427 Y56.98387
G01 X-77.86006 Y56.96512
G01 X-77.80847 Y56.94948
G01 X-77.71972 Y56.91272
G01 X-77.68333 Y56.89327
G01 X-77.68277 Y56.89195
G01 X-77.67700 Y56.87851
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.68277 Y56.89195 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.68277 Y56.89195
G01 X-77.68274 Y56.89195
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.63985 Y57.89014 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.63985 Y57.89014
G01 X-75.51325 Y57.91940
G01 X-75.44053 Y57.89578
G01 X-75.35183 Y57.84457
G01 X-75.30233 Y57.80861
G01 X-75.24437 Y57.75641
G01 X-75.23543 Y57.67810
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.03019 Y58.73393 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.03019 Y58.73393
G01 X-77.64937 Y59.11475
G01 X-77.61706 Y59.15039
G01 X-77.59239 Y59.18046
G01 X-77.57355 Y59.20342
G01 X-77.52018 Y59.28328
G01 X-77.48782 Y59.34378
G01 X-77.45107 Y59.43253
G01 X-77.43116 Y59.49819
G01 X-77.41241 Y59.59240
G01 X-77.40570 Y59.66070
G01 X-77.40334 Y59.70870
G01 X-77.40334 Y59.87970
G01 X-77.33143 Y59.93870
G01 X-77.26351 Y60.00662
G01 X-77.15783 Y60.13542
G01 X-77.10443 Y60.21528
G01 X-77.02590 Y60.36225
G01 X-76.99334 Y60.44081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.99334 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.99334 Y61.64614
G01 X-77.00141 Y61.66567
G01 X-77.00169 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.98422 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.98422 Y61.66677
G01 X-76.98505 Y61.66618
G01 X-76.99334 Y61.64614
G01 X-76.99334 Y60.44081
G01 X-76.96077 Y60.36225
G01 X-76.88224 Y60.21528
G01 X-76.82887 Y60.13542
G01 X-76.74833 Y60.03728
G01 X-76.72316 Y60.00662
G01 X-76.65524 Y59.93870
G01 X-76.58330 Y59.87967
G01 X-76.58330 Y59.25468
G01 X-77.10408 Y58.73390
G01 X-78.03019 Y58.73393
G01 X-78.53415 Y58.52519
G01 X-78.56069 Y58.51341
G01 X-78.62658 Y58.48227
G01 X-78.66976 Y58.45923
G01 X-78.73042 Y58.42285
G01 X-78.76544 Y58.39949
G01 X-78.82114 Y58.35816
G01 X-78.85081 Y58.33385
G01 X-78.90171 Y58.28770
G01 X-78.91512 Y58.27493
G01 X-79.98192 Y57.20813
G01 X-79.99470 Y57.19471
G01 X-80.04085 Y57.14381
G01 X-80.06516 Y57.11415
G01 X-80.10649 Y57.05844
G01 X-80.12985 Y57.02342
G01 X-80.16623 Y56.96276
G01 X-80.18926 Y56.91956
G01 X-80.22043 Y56.85367
G01 X-80.23219 Y56.82710
G01 X-80.33752 Y56.57282
G01 X-80.33752 Y54.63043
G01 X-80.35541 Y54.58489
G01 X-80.37468 Y54.53102
G01 X-80.39490 Y54.46457
G01 X-80.40842 Y54.41065
G01 X-80.42053 Y54.34989
G01 X-80.42853 Y54.29596
G01 X-80.43420 Y54.23859
G01 X-80.43684 Y54.18469
G01 X-80.43752 Y54.15652
G01 X-80.43752 Y52.90651
G01 X-80.43684 Y52.87837
G01 X-80.43420 Y52.82447
G01 X-80.42853 Y52.76709
G01 X-80.42053 Y52.71316
G01 X-80.40842 Y52.65241
G01 X-80.39490 Y52.59848
G01 X-80.38403 Y52.55990
G01 X-80.37522 Y52.53176
G01 X-80.37324 Y52.52533
G01 X-80.35825 Y52.47593
G01 X-80.35134 Y52.45424
G01 X-80.33125 Y52.39401
G01 X-80.32294 Y52.36793
G01 X-80.32254 Y52.36656
G01 X-80.37225 Y52.31118
G01 X-80.41786 Y52.25589
G01 X-80.42239 Y52.25048
G01 X-80.45810 Y52.20798
G01 X-80.46737 Y52.19673
G01 X-80.51126 Y52.14232
G01 X-80.52894 Y52.11949
G01 X-80.53219 Y52.11512
G01 X-80.55525 Y52.08967
G01 X-80.57898 Y52.06478
G01 X-80.81197 Y51.83178
G01 X-80.88423 Y51.74710
G01 X-80.92066 Y51.69696
G01 X-81.02955 Y51.48815
G01 X-81.05477 Y51.48378
G01 X-81.10146 Y51.47512
G01 X-81.11271 Y51.47296
G01 X-81.17268 Y51.46105
G01 X-81.17781 Y51.46000
G01 X-81.24593 Y51.44601
G01 X-81.25022 Y51.44514
G01 X-81.30118 Y51.43501
G01 X-81.32038 Y51.43090
G01 X-81.33254 Y51.42810
G01 X-81.38085 Y51.41896
G01 X-81.44946 Y51.40877
G01 X-81.50613 Y51.40318
G01 X-81.57476 Y51.39981
G01 X-81.60255 Y51.39912
G01 X-81.84857 Y51.39912
G01 X-81.88253 Y51.38507
G01 X-81.90783 Y51.37385
G01 X-81.95959 Y51.34939
G01 X-82.00163 Y51.32696
G01 X-82.04928 Y51.29836
G01 X-82.08370 Y51.27540
G01 X-82.12749 Y51.24294
G01 X-82.15698 Y51.21873
G01 X-82.19698 Y51.18248
G01 X-82.21857 Y51.16130
G01 X-82.22111 Y51.15442
G01 X-82.24039 Y51.10049
G01 X-82.25004 Y51.06877
G01 X-82.26356 Y51.01484
G01 X-82.26907 Y50.98713
G01 X-82.27707 Y50.93323
G01 X-82.27956 Y50.90791
G01 X-82.28222 Y50.85401
G01 X-82.28253 Y50.84172
G01 X-82.28253 Y49.59171
G01 X-82.28222 Y49.57944
G01 X-82.27956 Y49.52554
G01 X-82.27707 Y49.50022
G01 X-82.26907 Y49.44632
G01 X-82.26356 Y49.41861
G01 X-82.25004 Y49.36468
G01 X-82.24037 Y49.33291
G01 X-82.22109 Y49.27901
G01 X-82.20529 Y49.24098
G01 X-82.17979 Y49.18706
G01 X-82.17547 Y49.17812
G01 X-82.17547 Y49.04482
G01 X-82.17217 Y49.03237
G01 X-82.15865 Y48.97845
G01 X-82.15037 Y48.93705
G01 X-82.14240 Y48.88312
G01 X-82.13856 Y48.84451
G01 X-82.13592 Y48.79059
G01 X-82.13546 Y48.77172
G01 X-82.13546 Y47.52171
G01 X-82.13592 Y47.50286
G01 X-82.13856 Y47.44894
G01 X-82.14240 Y47.41033
G01 X-82.15037 Y47.35641
G01 X-82.15865 Y47.31500
G01 X-82.17217 Y47.26108
G01 X-82.18616 Y47.21498
G01 X-82.20547 Y47.16108
G01 X-82.22774 Y47.10741
G01 X-82.25324 Y47.05351
G01 X-82.28758 Y46.98950
G01 X-82.31989 Y46.93558
G01 X-82.37255 Y46.85704
G01 X-82.41253 Y46.80314
G01 X-82.43341 Y46.77777
G01 X-82.50087 Y46.76436
G01 X-82.55451 Y46.75907
G01 X-82.60254 Y46.75671
G01 X-83.15253 Y46.75671
G01 X-83.18751 Y46.75844
G01 X-83.19937 Y46.77088
G01 X-83.24824 Y46.82478
G01 X-83.31232 Y46.90258
G01 X-83.35228 Y46.95648
G01 X-83.39218 Y47.01599
G01 X-83.42451 Y47.06992
G01 X-83.44974 Y47.11696
G01 X-83.47526 Y47.17088
G01 X-83.49111 Y47.20903
G01 X-83.51039 Y47.26296
G01 X-83.52004 Y47.29468
G01 X-83.53356 Y47.34861
G01 X-83.53907 Y47.37632
G01 X-83.54707 Y47.43022
G01 X-83.54956 Y47.45554
G01 X-83.55222 Y47.50944
G01 X-83.55253 Y47.52171
G01 X-83.55253 Y48.77172
G01 X-83.55222 Y48.78401
G01 X-83.54956 Y48.83791
G01 X-83.54707 Y48.86323
G01 X-83.53907 Y48.91713
G01 X-83.53356 Y48.94485
G01 X-83.52004 Y48.99877
G01 X-83.51037 Y49.03054
G01 X-83.49109 Y49.08444
G01 X-83.47529 Y49.12247
G01 X-83.44979 Y49.17639
G01 X-83.42451 Y49.22353
G01 X-83.39251 Y49.27690
G01 X-83.39251 Y51.03641
G01 X-83.38403 Y51.06674
G01 X-83.36686 Y51.13534
G01 X-83.35690 Y51.18520
G01 X-83.34674 Y51.25381
G01 X-83.34214 Y51.30021
G01 X-83.33876 Y51.36882
G01 X-83.33828 Y51.38452
G01 X-83.33815 Y51.39153
G01 X-83.33767 Y51.40720
G01 X-83.33429 Y51.47583
G01 X-83.32970 Y51.52226
G01 X-83.31954 Y51.59086
G01 X-83.30958 Y51.64072
G01 X-83.29241 Y51.70933
G01 X-83.27542 Y51.76524
G01 X-83.25085 Y51.83384
G01 X-83.23859 Y51.86562
G01 X-83.11100 Y52.17359
G01 X-82.50402 Y52.42503
G01 X-82.48415 Y52.43270
G01 X-82.41555 Y52.45726
G01 X-82.38235 Y52.46734
G01 X-82.31375 Y52.48451
G01 X-82.28550 Y52.49015
G01 X-82.21687 Y52.50034
G01 X-82.19145 Y52.50285
G01 X-82.12281 Y52.50623
G01 X-82.11055 Y52.50653
G01 X-82.09894 Y52.50653
G01 X-81.85042 Y52.63003
G01 X-81.84982 Y52.63153
G01 X-81.76152 Y52.84466
G01 X-81.76152 Y54.43152
G01 X-81.86152 Y54.79891
G01 X-81.86152 Y55.13584
G01 X-81.83386 Y55.20970
G01 X-81.81400 Y55.27089
G01 X-81.77900 Y55.44432
G01 X-81.77656 Y55.47531
G01 X-81.77438 Y55.53051
G01 X-81.77438 Y56.37605
G01 X-81.78317 Y56.48694
G01 X-81.79284 Y56.54813
G01 X-81.87722 Y56.80081
G01 X-81.90839 Y56.86200
G01 X-81.91413 Y56.87305
G01 X-81.91413 Y56.87790
G01 X-81.91177 Y56.92593
G01 X-81.90521 Y56.99250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.91223 Y59.22776 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.91223 Y59.22776
G01 X-79.17827 Y59.96174
G01 X-79.22315 Y60.00662
G01 X-79.24832 Y60.03728
G01 X-79.32887 Y60.13542
G01 X-79.38223 Y60.21528
G01 X-79.46077 Y60.36225
G01 X-79.49333 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.49333 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.49333 Y61.64614
G01 X-79.50141 Y61.66565
G01 X-79.50174 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.48421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.48421 Y61.66677
G01 X-79.50174 Y61.66588
G01 X-79.56079 Y61.70608
G01 X-79.68513 Y61.80733
G01 X-79.69915 Y61.82110
G01 X-79.73148 Y61.85107
G01 X-79.75513 Y61.87177
G01 X-79.81449 Y61.93009
G01 X-79.87090 Y61.99232
G01 X-79.91954 Y62.04096
G01 X-79.96387 Y62.08114
G01 X-79.96552 Y62.08241
G01 X-80.04847 Y62.14652
G01 X-80.10506 Y62.18594
G01 X-80.11576 Y62.19265
G01 X-80.25233 Y62.26392
G01 X-80.28330 Y62.27911
G01 X-80.31599 Y62.29028
G01 X-80.46295 Y62.33644
G01 X-80.47524 Y62.33926
G01 X-80.54311 Y62.35137
G01 X-80.64916 Y62.36499
G01 X-80.70892 Y62.36793
G01 X-80.77773 Y62.36793
G01 X-80.83750 Y62.36499
G01 X-80.94354 Y62.35137
G01 X-81.01136 Y62.33926
G01 X-81.02371 Y62.33644
G01 X-81.17064 Y62.29028
G01 X-81.20333 Y62.27913
G01 X-81.23432 Y62.26392
G01 X-81.37090 Y62.19262
G01 X-81.38157 Y62.18594
G01 X-81.43818 Y62.14652
G01 X-81.44926 Y62.13794
G01 X-81.52276 Y62.08114
G01 X-81.56711 Y62.04096
G01 X-81.61575 Y61.99232
G01 X-81.67217 Y61.93009
G01 X-81.71169 Y61.88980
G01 X-81.73115 Y61.87144
G01 X-81.73440 Y61.86839
G01 X-81.78522 Y61.81988
G01 X-81.88146 Y61.74076
G01 X-81.92833 Y61.70741
G01 X-81.93711 Y61.70108
G01 X-81.98421 Y61.66679
G01 X-81.98421 Y61.66677
G01 X-81.98504 Y61.66618
G01 X-81.99333 Y61.64614
G01 X-81.99333 Y60.44083
G01 X-81.96079 Y60.36225
G01 X-81.88223 Y60.21528
G01 X-81.82886 Y60.13542
G01 X-81.74832 Y60.03728
G01 X-81.72315 Y60.00662
G01 X-81.65523 Y59.93870
G01 X-81.58332 Y59.87970
G01 X-81.58332 Y59.69026
G01 X-82.98426 Y58.28933
G01 X-83.46917 Y58.28935
G01 X-83.51862 Y58.27950
G01 X-83.58723 Y58.26931
G01 X-83.67844 Y58.26032
G01 X-83.74707 Y58.25694
G01 X-83.79192 Y58.25582
G01 X-84.51593 Y58.25582
G01 X-84.56081 Y58.25473
G01 X-84.62941 Y58.25135
G01 X-84.72060 Y58.24236
G01 X-84.78920 Y58.23218
G01 X-84.83858 Y58.22232
G01 X-84.88085 Y58.20485
G01 X-84.94135 Y58.17249
G01 X-85.02121 Y58.11912
G01 X-85.07424 Y58.07561
G01 X-85.10782 Y58.04516
G01 X-85.10876 Y58.04221
G01 X-85.11153 Y58.03357
G01 X-85.13274 Y57.96827
G01 X-85.25179 Y57.72989
G01 X-85.28819 Y57.67978
G01 X-85.36037 Y57.59517
G01 X-85.68407 Y57.27147
G01 X-85.70777 Y57.24658
G01 X-85.73088 Y57.22110
G01 X-85.75131 Y57.19355
G01 X-85.78958 Y57.13627
G01 X-85.80724 Y57.10683
G01 X-85.82192 Y57.07577
G01 X-85.82387 Y57.07160
G01 X-85.84826 Y57.01216
G01 X-85.85981 Y56.97986
G01 X-85.86817 Y56.94651
G01 X-85.88158 Y56.87904
G01 X-85.88664 Y56.84498
G01 X-85.88834 Y56.81074
G01 X-85.88918 Y56.77630
G01 X-85.88918 Y54.78433
G01 X-85.88925 Y54.77465
G01 X-85.88933 Y54.76914
G01 X-85.90152 Y54.64773
G01 X-85.90632 Y54.62208
G01 X-85.92608 Y54.59162
G01 X-85.93464 Y54.57770
G01 X-85.96472 Y54.53267
G01 X-85.98730 Y54.50155
G01 X-86.00216 Y54.47486
G01 X-86.02735 Y54.42718
G01 X-86.04605 Y54.38908
G01 X-86.05405 Y54.36368
G01 X-86.06842 Y54.31484
G01 X-86.06929 Y54.31197
G01 X-86.08138 Y54.26495
G01 X-86.08359 Y54.24463
G01 X-86.08801 Y54.19751
G01 X-86.08834 Y54.19094
G01 X-86.08918 Y54.15652
G01 X-86.08918 Y52.90651
G01 X-86.08834 Y52.87212
G01 X-86.08801 Y52.86554
G01 X-86.08359 Y52.81842
G01 X-86.08140 Y52.79815
G01 X-86.06929 Y52.75109
G01 X-86.05405 Y52.69937
G01 X-86.04605 Y52.67400
G01 X-86.02735 Y52.63587
G01 X-86.00216 Y52.58820
G01 X-85.98732 Y52.56158
G01 X-85.96385 Y52.53122
G01 X-85.92974 Y52.48949
G01 X-85.90716 Y52.46325
G01 X-85.88095 Y52.44070
G01 X-85.83922 Y52.40659
G01 X-85.80889 Y52.38312
G01 X-85.78212 Y52.36823
G01 X-85.73444 Y52.34303
G01 X-85.69644 Y52.32442
G01 X-85.67122 Y52.31647
G01 X-85.61951 Y52.30120
G01 X-85.57234 Y52.28906
G01 X-85.55202 Y52.28685
G01 X-85.50493 Y52.28246
G01 X-85.49832 Y52.28213
G01 X-85.46393 Y52.28126
G01 X-85.06843 Y52.28126
G01 X-85.01321 Y52.27910
G01 X-84.98224 Y52.27666
G01 X-84.91394 Y52.26798
G01 X-84.87750 Y52.26158
G01 X-84.82217 Y52.24979
G01 X-84.80571 Y52.24568
G01 X-84.74008 Y52.23191
G01 X-84.73713 Y52.23140
G01 X-84.70686 Y52.22571
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.11100 Y52.17359 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.11100 Y52.17359
G01 X-83.19894 Y52.26150
G01 X-83.38392 Y52.63153
G01 X-83.38392 Y54.43152
G01 X-83.35332 Y54.58207
G01 X-83.31247 Y54.61519
G01 X-83.27702 Y54.64054
G01 X-83.22891 Y54.67077
G01 X-83.19894 Y54.68730
G01 X-83.18024 Y54.69807
G01 X-83.12632 Y54.73038
G01 X-83.06371 Y54.77237
G01 X-83.04991 Y54.78258
G01 X-83.03856 Y54.82108
G01 X-83.02644 Y54.86815
G01 X-83.02426 Y54.88842
G01 X-83.01984 Y54.93554
G01 X-83.01951 Y54.94212
G01 X-83.01867 Y54.97651
G01 X-83.01867 Y56.22652
G01 X-83.01951 Y56.26093
G01 X-83.01989 Y56.26873
G01 X-83.02213 Y56.31486
G01 X-83.02238 Y56.33099
G01 X-83.02411 Y56.37102
G01 X-83.02517 Y56.38603
G01 X-83.02705 Y56.44181
G01 X-83.02690 Y56.52583
G01 X-83.02479 Y56.58811
G01 X-83.02454 Y56.59187
G01 X-83.02266 Y56.63228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.46917 Y58.28935 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.46917 Y58.28935
G01 X-83.42700 Y58.30680
G01 X-83.36650 Y58.33916
G01 X-83.28664 Y58.39253
G01 X-83.23361 Y58.43604
G01 X-83.19797 Y58.46835
G01 X-82.64936 Y59.01696
G01 X-82.61705 Y59.05260
G01 X-82.57354 Y59.10563
G01 X-82.52017 Y59.18549
G01 X-82.48781 Y59.24599
G01 X-82.45106 Y59.33474
G01 X-82.43114 Y59.40040
G01 X-82.41240 Y59.49461
G01 X-82.40945 Y59.52466
G01 X-82.40569 Y59.56291
G01 X-82.40333 Y59.61091
G01 X-82.40333 Y59.87970
G01 X-82.33145 Y59.93870
G01 X-82.26353 Y60.00662
G01 X-82.15782 Y60.13542
G01 X-82.10445 Y60.21528
G01 X-82.02589 Y60.36225
G01 X-81.99333 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.99333 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.99333 Y61.64614
G01 X-82.00140 Y61.66565
G01 X-82.00173 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.98421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.98421 Y61.66677
G01 X-82.00173 Y61.66588
G01 X-82.06079 Y61.70608
G01 X-82.18512 Y61.80733
G01 X-82.19914 Y61.82110
G01 X-82.23148 Y61.85107
G01 X-82.25512 Y61.87177
G01 X-82.31448 Y61.93009
G01 X-82.37090 Y61.99232
G01 X-82.41954 Y62.04096
G01 X-82.46386 Y62.08114
G01 X-82.46551 Y62.08241
G01 X-82.54847 Y62.14652
G01 X-82.60506 Y62.18594
G01 X-82.61575 Y62.19265
G01 X-82.75233 Y62.26392
G01 X-82.78329 Y62.27913
G01 X-82.81598 Y62.29028
G01 X-82.96294 Y62.33644
G01 X-82.97524 Y62.33926
G01 X-83.04311 Y62.35137
G01 X-83.14915 Y62.36499
G01 X-83.20892 Y62.36793
G01 X-83.27773 Y62.36793
G01 X-83.33749 Y62.36499
G01 X-83.44354 Y62.35137
G01 X-83.51141 Y62.33926
G01 X-83.52370 Y62.33644
G01 X-83.67066 Y62.29028
G01 X-83.70335 Y62.27911
G01 X-83.73432 Y62.26392
G01 X-83.87089 Y62.19265
G01 X-83.88159 Y62.18594
G01 X-83.93818 Y62.14652
G01 X-84.02276 Y62.08114
G01 X-84.06711 Y62.04096
G01 X-84.11575 Y61.99232
G01 X-84.15596 Y61.94797
G01 X-84.20897 Y61.87934
G01 X-84.22131 Y61.86339
G01 X-84.26073 Y61.80680
G01 X-84.26741 Y61.79610
G01 X-84.33871 Y61.65953
G01 X-84.35393 Y61.62854
G01 X-84.36505 Y61.59590
G01 X-84.41123 Y61.44899
G01 X-84.41405 Y61.43662
G01 X-84.42619 Y61.36875
G01 X-84.43980 Y61.26270
G01 X-84.44272 Y61.20294
G01 X-84.44359 Y61.16854
G01 X-84.44359 Y60.91853
G01 X-84.44272 Y60.88412
G01 X-84.43980 Y60.82435
G01 X-84.42619 Y60.71830
G01 X-84.41405 Y60.65043
G01 X-84.41123 Y60.63814
G01 X-84.36505 Y60.49115
G01 X-84.35390 Y60.45849
G01 X-84.33871 Y60.42752
G01 X-84.33292 Y60.41640
G01 X-84.32060 Y60.39166
G01 X-84.31397 Y60.37761
G01 X-84.27417 Y60.27309
G01 X-84.26513 Y60.24243
G01 X-84.25103 Y60.19928
G01 X-84.24458 Y60.18125
G01 X-84.20356 Y60.02267
G01 X-84.19619 Y59.97965
G01 X-84.19571 Y59.97678
G01 X-84.23894 Y59.90190
G01 X-84.24859 Y59.89659
G01 X-84.30978 Y59.86542
G01 X-84.56246 Y59.78104
G01 X-84.62365 Y59.77137
G01 X-84.73454 Y59.76258
G01 X-94.86808 Y59.76258
G01 X-94.90265 Y59.76344
G01 X-94.92226 Y59.76441
G01 X-95.06455 Y59.78584
G01 X-95.07011 Y59.79047
G01 X-95.11781 Y59.83050
G01 X-95.14372 Y59.85331
G01 X-95.19472 Y59.90040
G01 X-95.20051 Y59.90581
G01 X-95.20422 Y59.90929
G01 X-95.31656 Y59.99910
G01 X-95.35378 Y60.02686
G01 X-95.36488 Y60.03319
G01 X-95.37354 Y60.03799
G01 X-95.38530 Y60.04470
G01 X-95.39663 Y60.05127
G01 X-95.50356 Y60.12737
G01 X-95.50856 Y60.13164
G01 X-95.55850 Y60.17098
G01 X-95.56439 Y60.17525
G01 X-95.69363 Y60.28953
G01 X-95.72617 Y60.32392
G01 X-95.72644 Y60.32420
G01 X-95.73434 Y60.39923
G01 X-95.73434 Y60.46042
G01 X-95.72363 Y60.56235
G01 X-95.69195 Y60.65981
G01 X-95.64715 Y60.73738
G01 X-95.63600 Y60.74513
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.72617 Y60.32392 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.72617 Y60.32392
G01 X-95.77984 Y60.33459
G01 X-95.93592 Y60.34995
G01 X-96.03196 Y60.34995
G01 X-96.18804 Y60.33459
G01 X-96.24478 Y60.32328
G01 X-96.24481 Y60.32328
G01 X-96.24532 Y60.32275
G01 X-96.27460 Y60.29085
G01 X-96.40300 Y60.17375
G01 X-96.45962 Y60.13139
G01 X-96.46447 Y60.12773
G01 X-96.50894 Y60.09387
G01 X-96.59431 Y60.03799
G01 X-96.60297 Y60.03319
G01 X-96.61410 Y60.02686
G01 X-96.65128 Y59.99910
G01 X-96.72141 Y59.94307
G01 X-96.76360 Y59.90931
G01 X-96.77310 Y59.90035
G01 X-96.82085 Y59.85061
G01 X-96.89182 Y59.76898
G01 X-96.92068 Y59.72963
G01 X-96.95862 Y59.67220
G01 X-96.99558 Y59.60980
G01 X-97.03246 Y59.53385
G01 X-97.05946 Y59.47053
G01 X-97.07224 Y59.43596
G01 X-97.10442 Y59.32026
G01 X-97.11961 Y59.25300
G01 X-97.11981 Y59.25186
G01 X-97.13388 Y59.09682
G01 X-97.13614 Y59.06233
G01 X-97.13386 Y59.02781
G01 X-97.11981 Y58.87279
G01 X-97.11961 Y58.87162
G01 X-97.10442 Y58.80439
G01 X-97.07224 Y58.68869
G01 X-97.05946 Y58.65412
G01 X-97.03246 Y58.59080
G01 X-96.99558 Y58.51485
G01 X-96.95862 Y58.45245
G01 X-96.92068 Y58.39502
G01 X-96.89182 Y58.35567
G01 X-96.82085 Y58.27404
G01 X-96.77310 Y58.22430
G01 X-96.76363 Y58.21536
G01 X-96.65128 Y58.12555
G01 X-96.61410 Y58.09779
G01 X-96.59429 Y58.08671
G01 X-96.45619 Y58.01244
G01 X-96.44666 Y58.00741
G01 X-96.39198 Y57.98719
G01 X-96.36393 Y57.97815
G01 X-96.35553 Y57.97538
G01 X-96.24829 Y57.92961
G01 X-96.24593 Y57.92839
G01 X-96.19159 Y57.90254
G01 X-96.17760 Y57.89654
G01 X-96.02815 Y57.81417
G01 X-95.97036 Y57.77508
G01 X-95.96975 Y57.77467
G01 X-95.93592 Y57.77467
G01 X-95.77984 Y57.79004
G01 X-95.68563 Y57.80878
G01 X-95.53554 Y57.85430
G01 X-95.44682 Y57.89106
G01 X-95.30849 Y57.96499
G01 X-95.22863 Y58.01836
G01 X-95.10740 Y58.11785
G01 X-95.03948 Y58.18577
G01 X-95.00948 Y58.22232
G01 X-94.61136 Y58.22232
G01 X-94.60326 Y58.22806
G01 X-94.54207 Y58.25923
G01 X-94.28939 Y58.34361
G01 X-94.22820 Y58.35328
G01 X-94.11730 Y58.36207
G01 X-93.02455 Y58.36207
G01 X-93.01855 Y58.36205
G01 X-93.01558 Y58.36202
G01 X-92.89993 Y58.35148
G01 X-92.83874 Y58.34086
G01 X-92.58284 Y58.25102
G01 X-92.52848 Y58.22232
G01 X-91.56303 Y58.22232
G01 X-91.55526 Y58.22806
G01 X-91.49407 Y58.25923
G01 X-91.24139 Y58.34361
G01 X-91.18020 Y58.35328
G01 X-91.06930 Y58.36207
G01 X-89.97655 Y58.36207
G01 X-89.97055 Y58.36205
G01 X-89.96758 Y58.36202
G01 X-89.85193 Y58.35148
G01 X-89.79074 Y58.34086
G01 X-89.53484 Y58.25102
G01 X-89.48048 Y58.22232
G01 X-88.51503 Y58.22232
G01 X-88.50726 Y58.22806
G01 X-88.44607 Y58.25923
G01 X-88.19339 Y58.34361
G01 X-88.13220 Y58.35328
G01 X-88.02133 Y58.36207
G01 X-85.67808 Y58.36207
G01 X-85.59515 Y58.35717
G01 X-85.54892 Y58.35168
G01 X-85.33848 Y58.29565
G01 X-85.27729 Y58.27033
G01 X-85.18989 Y58.22232
G01 X-84.83858 Y58.22232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.10876 Y58.04221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.10876 Y58.04221
G01 X-85.10833 Y58.04358
G01 X-85.13241 Y58.13340
G01 X-85.17300 Y58.21305
G01 X-85.18986 Y58.22232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.68526 Y56.28097 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.68526 Y56.28097
G01 X-87.69402 Y56.16401
G01 X-87.71592 Y56.18593
G01 X-87.71130 Y56.23294
G01 X-87.71130 Y56.32898
G01 X-87.71592 Y56.37605
G01 X-87.69402 Y56.39794
G01 X-87.68526 Y56.28097
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.88000 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.88000 Y54.97409
G01 X-88.90075 Y54.97097
G01 X-89.09710 Y54.97097
G01 X-89.11785 Y54.97409
G01 X-89.09400 Y54.99794
G01 X-89.04696 Y54.99332
G01 X-88.95092 Y54.99332
G01 X-88.90385 Y54.99794
G01 X-88.88000 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.28195 Y56.18590 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.28195 Y56.18590
G01 X-90.28658 Y56.23294
G01 X-90.28658 Y56.32898
G01 X-90.28195 Y56.37605
G01 X-90.52292 Y56.61704
G01 X-90.76392 Y56.37605
G01 X-90.75930 Y56.32898
G01 X-90.75930 Y56.23294
G01 X-90.76392 Y56.18593
G01 X-90.52292 Y55.94491
G01 X-90.28195 Y56.18590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.92800 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.92800 Y54.97409
G01 X-91.94875 Y54.97097
G01 X-92.14510 Y54.97097
G01 X-92.16585 Y54.97409
G01 X-92.14200 Y54.99794
G01 X-92.09496 Y54.99332
G01 X-91.99892 Y54.99332
G01 X-91.95185 Y54.99794
G01 X-91.92800 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.33313 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.33313 Y51.24354
G01 X-93.39775 Y51.21977
G01 X-93.45706 Y51.20473
G01 X-93.55853 Y51.19008
G01 X-93.66082 Y51.19683
G01 X-93.75949 Y51.22475
G01 X-93.80646 Y51.24357
G01 X-93.80730 Y51.24489
G01 X-93.81342 Y51.25472
G01 X-93.85767 Y51.32409
G01 X-93.93475 Y51.47410
G01 X-93.94702 Y51.50539
G01 X-93.96277 Y51.54248
G01 X-93.97174 Y51.56214
G01 X-94.00595 Y51.65284
G01 X-94.01939 Y51.68916
G01 X-94.04639 Y51.75248
G01 X-94.08327 Y51.82846
G01 X-94.12023 Y51.89084
G01 X-94.15393 Y51.94243
G01 X-94.15817 Y51.94829
G01 X-94.18703 Y51.98764
G01 X-94.25799 Y52.06925
G01 X-94.30572 Y52.11898
G01 X-94.31522 Y52.12795
G01 X-94.42756 Y52.21776
G01 X-94.46475 Y52.24552
G01 X-94.48451 Y52.25655
G01 X-94.62264 Y52.33084
G01 X-94.63221 Y52.33590
G01 X-94.68687 Y52.35612
G01 X-94.81240 Y52.39668
G01 X-94.83673 Y52.40237
G01 X-94.90448 Y52.41476
G01 X-94.99990 Y52.42741
G01 X-95.06053 Y52.43039
G01 X-95.12934 Y52.43039
G01 X-95.18995 Y52.42741
G01 X-95.28537 Y52.41476
G01 X-95.35312 Y52.40237
G01 X-95.37745 Y52.39668
G01 X-95.50298 Y52.35612
G01 X-95.55764 Y52.33590
G01 X-95.56721 Y52.33084
G01 X-95.70534 Y52.25655
G01 X-95.72507 Y52.24552
G01 X-95.76228 Y52.21776
G01 X-95.84344 Y52.15289
G01 X-95.87465 Y52.12795
G01 X-95.88413 Y52.11898
G01 X-95.93185 Y52.06925
G01 X-96.00282 Y51.98761
G01 X-96.03168 Y51.94829
G01 X-96.06962 Y51.89084
G01 X-96.10658 Y51.82846
G01 X-96.14346 Y51.75248
G01 X-96.17046 Y51.68916
G01 X-96.18392 Y51.65274
G01 X-96.18631 Y51.64497
G01 X-96.19022 Y51.63247
G01 X-96.22558 Y51.54202
G01 X-96.24293 Y51.50511
G01 X-96.25664 Y51.47425
G01 X-96.26823 Y51.44654
G01 X-96.33152 Y51.32404
G01 X-96.38113 Y51.24357
G01 X-96.38113 Y51.24354
G01 X-96.38258 Y51.24123
G01 X-96.38258 Y51.23293
G01 X-96.36721 Y51.07687
G01 X-96.34847 Y50.98266
G01 X-96.30295 Y50.83257
G01 X-96.26619 Y50.74383
G01 X-96.19226 Y50.60552
G01 X-96.13889 Y50.52566
G01 X-96.03940 Y50.40443
G01 X-95.97148 Y50.33651
G01 X-95.85024 Y50.23702
G01 X-95.77039 Y50.18365
G01 X-95.63206 Y50.10971
G01 X-95.54311 Y50.07288
G01 X-95.54311 Y49.46143
G01 X-95.57968 Y49.43143
G01 X-95.64760 Y49.36351
G01 X-95.74710 Y49.24228
G01 X-95.80046 Y49.16240
G01 X-95.87437 Y49.02409
G01 X-95.91115 Y48.93535
G01 X-95.95311 Y48.79699
G01 X-95.95492 Y48.78475
G01 X-95.96429 Y48.68998
G01 X-95.97199 Y48.53314
G01 X-95.97199 Y48.44081
G01 X-95.96429 Y48.28399
G01 X-95.95492 Y48.18925
G01 X-95.95314 Y48.17716
G01 X-95.95314 Y47.92697
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.86213 Y47.92697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.86213 Y47.92697
G01 X-95.87437 Y47.94983
G01 X-95.91115 Y48.03857
G01 X-95.95309 Y48.17688
G01 X-95.95492 Y48.18925
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.76927 Y47.20111 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.76927 Y47.20111
G01 X-94.75116 Y47.19933
G01 X-94.67158 Y47.19933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.69211 Y47.12389 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.69211 Y47.12389
G01 X-94.76927 Y47.20111
G01 X-94.90234 Y47.26405
G01 X-94.97968 Y47.30530
G01 X-95.11834 Y47.38843
G01 X-95.17951 Y47.42925
G01 X-95.30686 Y47.52369
G01 X-95.35792 Y47.56557
G01 X-95.36137 Y47.56872
G01 X-95.38593 Y47.58991
G01 X-95.43897 Y47.63344
G01 X-95.47973 Y47.66433
G01 X-95.49132 Y47.67243
G01 X-95.53328 Y47.70426
G01 X-95.54636 Y47.71498
G01 X-95.60384 Y47.75757
G01 X-95.66345 Y47.79740
G01 X-95.66541 Y47.79870
G01 X-95.73401 Y47.84426
G01 X-95.79873 Y47.88749
G01 X-95.84311 Y47.91559
G01 X-95.86213 Y47.92697
G01 X-95.95314 Y47.92697
G01 X-96.19314 Y47.68699
G01 X-96.44313 Y47.56197
G01 X-98.04310 Y47.56197
G01 X-98.16525 Y47.59181
G01 X-98.22382 Y47.68699
G01 X-98.53309 Y48.43367
G01 X-98.74915 Y48.64970
G01 X-98.74912 Y50.14662
G01 X-98.79616 Y50.22513
G01 X-98.84036 Y50.30755
G01 X-98.91453 Y50.46437
G01 X-98.93993 Y50.52549
G01 X-98.99603 Y50.68231
G01 X-99.01011 Y50.72859
G01 X-99.04937 Y50.88538
G01 X-99.05664 Y50.92188
G01 X-99.07991 Y51.07870
G01 X-99.08295 Y51.10959
G01 X-99.09067 Y51.26640
G01 X-99.09067 Y51.29554
G01 X-99.08295 Y51.45238
G01 X-99.07991 Y51.48327
G01 X-99.05664 Y51.64009
G01 X-99.04937 Y51.67656
G01 X-99.01011 Y51.83336
G01 X-98.99603 Y51.87964
G01 X-98.93993 Y52.03646
G01 X-98.91453 Y52.09757
G01 X-98.84036 Y52.25439
G01 X-98.79621 Y52.33674
G01 X-98.76548 Y52.38799
G01 X-98.78603 Y52.42833
G01 X-98.87041 Y52.68101
G01 X-98.88008 Y52.74220
G01 X-98.88887 Y52.85307
G01 X-98.88887 Y54.40524
G01 X-98.88412 Y54.48672
G01 X-98.87884 Y54.53221
G01 X-98.82392 Y54.74095
G01 X-98.79883 Y54.80214
G01 X-98.74915 Y54.89129
G01 X-98.74910 Y55.14661
G01 X-98.79621 Y55.22522
G01 X-98.84033 Y55.30752
G01 X-98.91453 Y55.46431
G01 X-98.93993 Y55.52548
G01 X-98.99603 Y55.68230
G01 X-99.01011 Y55.72858
G01 X-99.04937 Y55.88542
G01 X-99.05664 Y55.92187
G01 X-99.07991 Y56.07869
G01 X-99.08295 Y56.10958
G01 X-99.09067 Y56.26642
G01 X-99.09067 Y56.29555
G01 X-99.08295 Y56.45237
G01 X-99.07991 Y56.48326
G01 X-99.05664 Y56.64008
G01 X-99.04937 Y56.67658
G01 X-99.01011 Y56.83337
G01 X-98.99603 Y56.87965
G01 X-98.93993 Y57.03647
G01 X-98.91453 Y57.09758
G01 X-98.84036 Y57.25440
G01 X-98.79616 Y57.33683
G01 X-98.74915 Y57.41529
G01 X-98.68006 Y57.45222
G01 X-98.59134 Y57.48897
G01 X-98.44125 Y57.53449
G01 X-98.34704 Y57.55324
G01 X-98.19096 Y57.56860
G01 X-98.09492 Y57.56860
G01 X-98.04788 Y57.56398
G01 X-98.02400 Y57.58786
G01 X-98.04475 Y57.59098
G01 X-98.24107 Y57.59098
G01 X-98.35181 Y57.57429
G01 X-98.43304 Y57.57155
G01 X-98.46510 Y57.57046
G01 X-98.51044 Y57.57419
G01 X-98.59817 Y57.58956
G01 X-98.68171 Y57.62052
G01 X-98.74871 Y57.66045
G01 X-98.74915 Y57.66116
G01 X-98.75486 Y57.67076
G01 X-98.78603 Y57.73195
G01 X-98.87041 Y57.98463
G01 X-98.88008 Y58.04582
G01 X-98.88887 Y58.15671
G01 X-98.88887 Y59.38600
G01 X-98.88834 Y59.41356
G01 X-98.88773 Y59.42908
G01 X-98.86944 Y59.56403
G01 X-98.82961 Y59.61889
G01 X-98.75730 Y59.70365
G01 X-97.71344 Y60.74749
G01 X-97.69355 Y60.76661
G01 X-97.68214 Y60.77716
G01 X-97.57381 Y60.85965
G01 X-97.56800 Y60.86059
G01 X-97.50681 Y60.87030
G01 X-97.39576 Y60.87909
G01 X-96.81768 Y60.87909
G01 X-96.79451 Y60.87870
G01 X-96.78143 Y60.87827
G01 X-96.64542 Y60.86059
G01 X-96.58423 Y60.84670
G01 X-96.32329 Y60.73933
G01 X-95.64435 Y60.73933
G01 X-95.63600 Y60.74513
G01 X-95.57483 Y60.77629
G01 X-95.32241 Y60.86059
G01 X-95.26122 Y60.87030
G01 X-95.15019 Y60.87909
G01 X-90.12493 Y60.87909
G01 X-90.09049 Y60.87992
G01 X-90.05612 Y60.88163
G01 X-90.02219 Y60.88665
G01 X-89.95473 Y60.90007
G01 X-89.92140 Y60.90842
G01 X-89.88907 Y60.92001
G01 X-89.82547 Y60.94632
G01 X-89.79443 Y60.96103
G01 X-89.76496 Y60.97868
G01 X-89.70769 Y61.01696
G01 X-89.68015 Y61.03735
G01 X-89.65465 Y61.06049
G01 X-89.62976 Y61.08419
G01 X-87.48486 Y63.22909
G01 X-87.46410 Y63.24901
G01 X-87.45217 Y63.26001
G01 X-87.33718 Y63.34631
G01 X-87.28338 Y63.37903
G01 X-87.19204 Y63.42699
G01 X-87.16362 Y63.42737
G01 X-85.79337 Y63.42262
G01 X-85.60856 Y63.47563
G01 X-85.54739 Y63.48530
G01 X-85.43650 Y63.49407
G01 X-67.73793 Y63.49407
G01 X-67.70346 Y63.49493
G01 X-67.66922 Y63.49661
G01 X-67.63516 Y63.50166
G01 X-67.56770 Y63.51507
G01 X-67.53440 Y63.52343
G01 X-67.50207 Y63.53499
G01 X-67.43844 Y63.56133
G01 X-67.40743 Y63.57603
G01 X-67.37796 Y63.59369
G01 X-67.33054 Y63.62477
G01 X-67.32068 Y63.63194
G01 X-67.29318 Y63.65236
G01 X-67.26765 Y63.67550
G01 X-67.24276 Y63.69920
G01 X-63.35778 Y67.58418
G01 X-63.33405 Y67.60907
G01 X-63.31102 Y67.63450
G01 X-63.29054 Y67.66210
G01 X-63.25227 Y67.71938
G01 X-63.23461 Y67.74885
G01 X-63.21991 Y67.77988
G01 X-63.19359 Y67.84349
G01 X-63.18203 Y67.87577
G01 X-63.17284 Y67.91250
G01 X-63.15722 Y67.97630
G01 X-63.14894 Y68.00711
G01 X-63.13832 Y68.04336
G01 X-63.13621 Y68.05072
G01 X-63.13052 Y68.05784
G01 X-63.06354 Y68.13046
G01 X-63.01599 Y68.18004
G01 X-62.94503 Y68.26167
G01 X-62.91617 Y68.30102
G01 X-62.87822 Y68.35845
G01 X-62.84127 Y68.42085
G01 X-62.80439 Y68.49680
G01 X-62.77739 Y68.56012
G01 X-62.77662 Y68.56218
G01 X-62.75369 Y68.71684
G01 X-62.74739 Y68.78059
G01 X-62.73967 Y68.93741
G01 X-62.73967 Y68.99921
G01 X-62.74739 Y69.15603
G01 X-62.75369 Y69.21981
G01 X-62.77662 Y69.37447
G01 X-62.77739 Y69.37653
G01 X-62.80439 Y69.43985
G01 X-62.84127 Y69.51580
G01 X-62.87822 Y69.57820
G01 X-62.90655 Y69.62220
G01 X-62.91617 Y69.63563
G01 X-62.94503 Y69.67498
G01 X-63.01599 Y69.75661
G01 X-63.06375 Y69.80635
G01 X-63.07322 Y69.81529
G01 X-63.18556 Y69.90510
G01 X-63.22275 Y69.93286
G01 X-63.24256 Y69.94394
G01 X-63.38066 Y70.01821
G01 X-63.39021 Y70.02324
G01 X-63.44487 Y70.04346
G01 X-63.57040 Y70.08402
G01 X-63.59473 Y70.08971
G01 X-63.66242 Y70.10208
G01 X-63.75790 Y70.11475
G01 X-63.81848 Y70.11773
G01 X-63.88739 Y70.11773
G01 X-63.94795 Y70.11475
G01 X-64.04342 Y70.10208
G01 X-64.11112 Y70.08971
G01 X-64.13545 Y70.08402
G01 X-64.26098 Y70.04346
G01 X-64.31564 Y70.02324
G01 X-64.32519 Y70.01821
G01 X-64.46329 Y69.94394
G01 X-64.48310 Y69.93286
G01 X-64.52028 Y69.90510
G01 X-64.63263 Y69.81531
G01 X-64.64210 Y69.80635
G01 X-64.68985 Y69.75661
G01 X-64.76936 Y69.66515
G01 X-64.79255 Y69.63800
G01 X-64.84022 Y69.58494
G01 X-64.84505 Y69.57958
G01 X-64.88772 Y69.53299
G01 X-64.95432 Y69.46810
G01 X-65.02554 Y69.40597
G01 X-65.07616 Y69.36639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.16964 Y69.36629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.16964 Y69.36629
G01 X-65.13941 Y69.26662
G01 X-65.12292 Y69.18374
G01 X-65.12292 Y68.75273
G01 X-65.13941 Y68.67000
G01 X-65.18493 Y68.51991
G01 X-65.22168 Y68.43119
G01 X-65.29562 Y68.29286
G01 X-65.34898 Y68.21301
G01 X-65.44848 Y68.09177
G01 X-65.51640 Y68.02385
G01 X-65.63763 Y67.92436
G01 X-65.71749 Y67.87099
G01 X-65.85582 Y67.79706
G01 X-65.94454 Y67.76030
G01 X-66.09463 Y67.71478
G01 X-66.18884 Y67.69604
G01 X-66.34492 Y67.68067
G01 X-66.44096 Y67.68067
G01 X-66.48797 Y67.68530
G01 X-68.68627 Y65.48705
G01 X-69.13897 Y65.03435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.50173 Y61.66588 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.50173 Y61.66588
G01 X-69.50140 Y61.66565
G01 X-69.49332 Y61.64614
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.48421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.48421 Y61.66677
G01 X-69.50173 Y61.66588
G01 X-69.56079 Y61.70608
G01 X-69.68509 Y61.80733
G01 X-69.69912 Y61.82110
G01 X-69.73148 Y61.85107
G01 X-69.75512 Y61.87177
G01 X-69.81448 Y61.93009
G01 X-69.87090 Y61.99232
G01 X-69.91954 Y62.04096
G01 X-69.96386 Y62.08114
G01 X-69.96551 Y62.08241
G01 X-70.04847 Y62.14652
G01 X-70.10503 Y62.18594
G01 X-70.11575 Y62.19265
G01 X-70.25233 Y62.26392
G01 X-70.28329 Y62.27911
G01 X-70.31598 Y62.29028
G01 X-70.46294 Y62.33644
G01 X-70.47524 Y62.33926
G01 X-70.54311 Y62.35137
G01 X-70.64915 Y62.36499
G01 X-70.70892 Y62.36793
G01 X-70.77773 Y62.36793
G01 X-70.83747 Y62.36499
G01 X-70.94354 Y62.35137
G01 X-71.01141 Y62.33926
G01 X-71.02370 Y62.33644
G01 X-71.17066 Y62.29028
G01 X-71.20335 Y62.27911
G01 X-71.23432 Y62.26392
G01 X-71.37089 Y62.19265
G01 X-71.38159 Y62.18594
G01 X-71.43818 Y62.14652
G01 X-71.52276 Y62.08114
G01 X-71.56711 Y62.04096
G01 X-71.61575 Y61.99232
G01 X-71.67216 Y61.93009
G01 X-71.71168 Y61.88980
G01 X-71.73114 Y61.87144
G01 X-71.73439 Y61.86839
G01 X-71.78522 Y61.81988
G01 X-71.88146 Y61.74076
G01 X-71.92832 Y61.70741
G01 X-71.93711 Y61.70108
G01 X-71.98420 Y61.66679
G01 X-71.98420 Y61.66677
G01 X-71.98504 Y61.66618
G01 X-71.99332 Y61.64611
G01 X-71.99332 Y61.46067
G01 X-71.99335 Y61.37535
G01 X-71.99335 Y60.71170
G01 X-71.99332 Y60.62638
G01 X-71.99332 Y60.44081
G01 X-71.96078 Y60.36225
G01 X-71.88222 Y60.21528
G01 X-71.82885 Y60.13542
G01 X-71.74834 Y60.03730
G01 X-71.72317 Y60.00662
G01 X-71.65522 Y59.93870
G01 X-71.58331 Y59.87967
G01 X-71.58331 Y59.37787
G01 X-72.40665 Y58.55453
G01 X-72.43320 Y58.49845
G01 X-72.47709 Y58.41617
G01 X-72.51344 Y58.35552
G01 X-72.55966 Y58.28625
G01 X-72.60099 Y58.23055
G01 X-72.65032 Y58.17040
G01 X-72.69644 Y58.11950
G01 X-72.72260 Y58.09205
G01 X-73.41602 Y57.39863
G01 X-73.44219 Y57.37117
G01 X-73.48831 Y57.32027
G01 X-73.53764 Y57.26012
G01 X-73.57897 Y57.20442
G01 X-73.62519 Y57.13515
G01 X-73.66154 Y57.07450
G01 X-73.70340 Y56.99649
G01 X-73.70363 Y56.99205
G01 X-73.70701 Y56.92342
G01 X-73.70812 Y56.87790
G01 X-73.70812 Y54.58951
G01 X-73.71630 Y54.56752
G01 X-73.73558 Y54.51359
G01 X-73.76070 Y54.43094
G01 X-73.77422 Y54.37702
G01 X-73.78946 Y54.30069
G01 X-73.79746 Y54.24676
G01 X-73.80459 Y54.17427
G01 X-73.80726 Y54.12037
G01 X-73.80812 Y54.08471
G01 X-73.80812 Y53.58098
G01 X-73.80901 Y53.54532
G01 X-73.81237 Y53.47671
G01 X-73.81955 Y53.40409
G01 X-73.82971 Y53.33549
G01 X-73.84503 Y53.25865
G01 X-73.86223 Y53.19005
G01 X-73.88786 Y53.10577
G01 X-73.91242 Y53.03717
G01 X-73.93043 Y52.99051
G01 X-73.93533 Y52.97864
G01 X-73.93533 Y52.90140
G01 X-73.88882 Y52.83473
G01 X-73.86317 Y52.79355
G01 X-73.83352 Y52.74232
G01 X-73.81625 Y52.71004
G01 X-73.79535 Y52.67331
G01 X-73.78435 Y52.65518
G01 X-73.76726 Y52.62548
G01 X-73.73380 Y52.56404
G01 X-73.72961 Y52.55624
G01 X-73.70856 Y52.51639
G01 X-73.69372 Y52.48977
G01 X-73.67018 Y52.45934
G01 X-73.63606 Y52.41763
G01 X-73.61356 Y52.39147
G01 X-73.58745 Y52.36899
G01 X-73.54572 Y52.33486
G01 X-73.51529 Y52.31131
G01 X-73.48852 Y52.29643
G01 X-73.44084 Y52.27123
G01 X-73.40289 Y52.25264
G01 X-73.37747 Y52.24461
G01 X-73.36957 Y52.24230
G01 X-73.33703 Y52.23183
G01 X-73.32616 Y52.22805
G01 X-73.31902 Y52.22561
G01 X-73.25936 Y52.20554
G01 X-73.20713 Y52.18581
G01 X-73.17419 Y52.17194
G01 X-73.11300 Y52.14662
G01 X-72.97693 Y52.06971
G01 X-72.79545 Y52.06973
G01 X-72.62034 Y52.14227
G01 X-72.58095 Y52.15972
G01 X-72.52918 Y52.18421
G01 X-72.46205 Y52.22002
G01 X-72.41438 Y52.24860
G01 X-72.35786 Y52.28632
G01 X-72.31407 Y52.31878
G01 X-72.28219 Y52.34397
G01 X-72.27099 Y52.36661
G01 X-72.24549 Y52.42053
G01 X-72.22329 Y52.47400
G01 X-72.20399 Y52.52790
G01 X-72.18997 Y52.57407
G01 X-72.17645 Y52.62800
G01 X-72.16817 Y52.66940
G01 X-72.16020 Y52.72332
G01 X-72.15636 Y52.76193
G01 X-72.15372 Y52.81586
G01 X-72.15326 Y52.83473
G01 X-72.15326 Y54.08471
G01 X-72.15372 Y54.10359
G01 X-72.15636 Y54.15751
G01 X-72.16020 Y54.19612
G01 X-72.16817 Y54.25004
G01 X-72.17645 Y54.29144
G01 X-72.18997 Y54.34537
G01 X-72.20396 Y54.39147
G01 X-72.22327 Y54.44537
G01 X-72.23348 Y54.47186
G01 X-72.25359 Y54.48921
G01 X-72.26713 Y54.50031
G01 X-72.27361 Y54.50572
G01 X-72.29121 Y54.54905
G01 X-72.31049 Y54.60295
G01 X-72.32408 Y54.64760
G01 X-72.33759 Y54.70153
G01 X-72.34557 Y54.74151
G01 X-72.35354 Y54.79540
G01 X-72.35723 Y54.83264
G01 X-72.35987 Y54.88654
G01 X-72.36032 Y54.90473
G01 X-72.36032 Y56.15474
G01 X-72.35987 Y56.17290
G01 X-72.35723 Y56.22680
G01 X-72.35354 Y56.26403
G01 X-72.34557 Y56.31793
G01 X-72.33759 Y56.35791
G01 X-72.32408 Y56.41184
G01 X-72.31051 Y56.45641
G01 X-72.29124 Y56.51034
G01 X-72.26962 Y56.56236
G01 X-72.24732 Y56.60952
G01 X-72.24232 Y56.61404
G01 X-72.19652 Y56.65161
G01 X-72.15276 Y56.68407
G01 X-72.09977 Y56.71943
G01 X-72.05210 Y56.74800
G01 X-71.98913 Y56.78161
G01 X-71.93739 Y56.80607
G01 X-71.90033 Y56.82250
G01 X-71.66558 Y56.91973
G01 X-71.55065 Y57.03467
G01 X-71.54747 Y57.04595
G01 X-71.52624 Y57.11128
G01 X-71.40732 Y57.34950
G01 X-71.37089 Y57.39962
G01 X-71.29863 Y57.48432
G01 X-70.24816 Y58.53479
G01 X-70.22444 Y58.55968
G01 X-70.20135 Y58.58516
G01 X-70.18088 Y58.61272
G01 X-70.14262 Y58.67000
G01 X-70.12500 Y58.69944
G01 X-70.11032 Y58.73050
G01 X-70.08398 Y58.79410
G01 X-70.07239 Y58.82644
G01 X-70.06404 Y58.85976
G01 X-70.05063 Y58.92720
G01 X-70.04560 Y58.96118
G01 X-70.04387 Y58.99547
G01 X-70.04306 Y59.02994
G01 X-70.04306 Y59.73527
G01 X-70.04255 Y59.76222
G01 X-70.04191 Y59.77777
G01 X-70.02223 Y59.91932
G01 X-70.01862 Y59.93426
G01 X-69.98898 Y59.97106
G01 X-69.91949 Y60.04602
G01 X-69.91176 Y60.05323
G01 X-69.87090 Y60.09473
G01 X-69.81448 Y60.15696
G01 X-69.77496 Y60.19725
G01 X-69.75550 Y60.21561
G01 X-69.75223 Y60.21866
G01 X-69.70143 Y60.26717
G01 X-69.60516 Y60.34632
G01 X-69.55832 Y60.37965
G01 X-69.54948 Y60.38602
G01 X-69.50244 Y60.42026
G01 X-69.50163 Y60.42087
G01 X-69.49332 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.48492 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.48492 Y60.42117
G01 X-69.50244 Y60.42026
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.40326 Y58.27467 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.40326 Y58.27467
G01 X-67.40331 Y58.91488
G01 X-67.40331 Y59.87972
G01 X-67.33143 Y59.93870
G01 X-67.26348 Y60.00662
G01 X-67.15782 Y60.13542
G01 X-67.10445 Y60.21528
G01 X-67.02589 Y60.36225
G01 X-66.99330 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.99330 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.99330 Y61.64614
G01 X-67.00138 Y61.66565
G01 X-67.00171 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.98421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.98421 Y61.66677
G01 X-67.00174 Y61.66588
G01 X-67.06077 Y61.70608
G01 X-67.18502 Y61.80728
G01 X-67.19915 Y61.82110
G01 X-67.23143 Y61.85102
G01 X-67.25510 Y61.87177
G01 X-67.31446 Y61.93009
G01 X-67.37090 Y61.99232
G01 X-67.41954 Y62.04096
G01 X-67.46386 Y62.08114
G01 X-67.46552 Y62.08241
G01 X-67.54847 Y62.14652
G01 X-67.60506 Y62.18597
G01 X-67.61573 Y62.19265
G01 X-67.75233 Y62.26392
G01 X-67.78327 Y62.27911
G01 X-67.81598 Y62.29028
G01 X-67.96295 Y62.33644
G01 X-67.97524 Y62.33926
G01 X-68.04311 Y62.35137
G01 X-68.14916 Y62.36499
G01 X-68.20892 Y62.36793
G01 X-68.27771 Y62.36793
G01 X-68.33747 Y62.36499
G01 X-68.44354 Y62.35137
G01 X-68.51139 Y62.33926
G01 X-68.52368 Y62.33644
G01 X-68.67067 Y62.29028
G01 X-68.70331 Y62.27913
G01 X-68.73430 Y62.26392
G01 X-68.87090 Y62.19262
G01 X-68.88157 Y62.18594
G01 X-68.93818 Y62.14652
G01 X-68.94926 Y62.13794
G01 X-69.02276 Y62.08114
G01 X-69.06709 Y62.04096
G01 X-69.11575 Y61.99232
G01 X-69.17214 Y61.93009
G01 X-69.21169 Y61.88980
G01 X-69.23115 Y61.87144
G01 X-69.23440 Y61.86839
G01 X-69.28522 Y61.81988
G01 X-69.38146 Y61.74076
G01 X-69.42830 Y61.70741
G01 X-69.43711 Y61.70108
G01 X-69.48421 Y61.66679
G01 X-69.48421 Y61.66677
G01 X-69.48504 Y61.66618
G01 X-69.49332 Y61.64614
G01 X-69.49332 Y60.44083
G01 X-69.48527 Y60.42143
G01 X-69.48492 Y60.42117
G01 X-69.42586 Y60.38097
G01 X-69.30143 Y60.27965
G01 X-69.28751 Y60.26596
G01 X-69.25510 Y60.23593
G01 X-69.23153 Y60.21528
G01 X-69.17214 Y60.15696
G01 X-69.11575 Y60.09473
G01 X-69.07489 Y60.05323
G01 X-69.06716 Y60.04602
G01 X-69.05507 Y60.03446
G01 X-69.04392 Y60.02354
G01 X-68.96686 Y59.93471
G01 X-68.96201 Y59.90736
G01 X-68.95233 Y59.84619
G01 X-68.94357 Y59.73527
G01 X-68.94357 Y55.38392
G01 X-68.94367 Y55.37163
G01 X-68.94377 Y55.36513
G01 X-68.95662 Y55.24272
G01 X-68.96838 Y55.18156
G01 X-69.06508 Y54.92152
G01 X-69.08329 Y54.88852
G01 X-69.10712 Y54.87348
G01 X-69.19909 Y54.82820
G01 X-69.29843 Y54.80300
G01 X-69.40084 Y54.79904
G01 X-69.46188 Y54.80308
G01 X-69.51530 Y54.81087
G01 X-69.51530 Y54.75253
G01 X-69.47367 Y54.71837
G01 X-69.45886 Y54.70620
G01 X-69.39792 Y54.63193
G01 X-69.35261 Y54.54722
G01 X-69.32474 Y54.45530
G01 X-69.31532 Y54.35972
G01 X-69.31532 Y53.36546
G01 X-69.64908 Y52.55972
G01 X-69.73404 Y52.44491
G01 X-69.80531 Y52.43473
G01 X-70.37404 Y52.43473
G01 X-70.38631 Y52.43445
G01 X-70.45494 Y52.43107
G01 X-70.48037 Y52.42856
G01 X-70.54900 Y52.41837
G01 X-70.57724 Y52.41273
G01 X-70.64585 Y52.39556
G01 X-70.67905 Y52.38548
G01 X-70.74765 Y52.36092
G01 X-70.76752 Y52.35325
G01 X-70.90534 Y52.29617
G01 X-70.96856 Y52.27402
G01 X-71.05469 Y52.06605
G01 X-71.06335 Y52.04654
G01 X-71.09452 Y51.98065
G01 X-71.11082 Y51.95010
G01 X-71.14717 Y51.88944
G01 X-71.16317 Y51.86546
G01 X-71.20450 Y51.80976
G01 X-71.22073 Y51.78998
G01 X-71.26688 Y51.73907
G01 X-71.27534 Y51.73018
G01 X-71.42779 Y51.57771
G01 X-71.43625 Y51.56882
G01 X-71.48240 Y51.51792
G01 X-71.49863 Y51.49813
G01 X-71.53996 Y51.44243
G01 X-71.55596 Y51.41845
G01 X-71.59230 Y51.35779
G01 X-71.60861 Y51.32721
G01 X-71.63978 Y51.26132
G01 X-71.64841 Y51.24182
G01 X-71.93193 Y50.55736
G01 X-71.93193 Y49.28526
G01 X-71.94016 Y49.27703
G01 X-71.97437 Y49.23534
G01 X-72.02774 Y49.15549
G01 X-72.05161 Y49.11081
G01 X-72.05240 Y49.10766
G01 X-72.07117 Y49.01350
G01 X-72.07917 Y48.95960
G01 X-72.08804 Y48.86984
G01 X-72.09068 Y48.81594
G01 X-72.09177 Y48.77172
G01 X-72.09177 Y47.52171
G01 X-72.09068 Y47.47751
G01 X-72.08804 Y47.42361
G01 X-72.07917 Y47.33385
G01 X-72.07117 Y47.27995
G01 X-72.05240 Y47.18579
G01 X-72.05161 Y47.18259
G01 X-72.05164 Y45.83055
G01 X-71.99340 Y45.78277
G01 X-71.92548 Y45.71485
G01 X-71.82598 Y45.59362
G01 X-71.77262 Y45.51376
G01 X-71.69868 Y45.37543
G01 X-71.66193 Y45.28671
G01 X-71.61641 Y45.13662
G01 X-71.59992 Y45.05374
G01 X-71.59992 Y44.62273
G01 X-71.58347 Y44.54000
G01 X-71.55321 Y44.44033
G01 X-71.54072 Y44.43058
G01 X-71.50366 Y44.40035
G01 X-71.43117 Y44.33863
G01 X-71.33231 Y44.23881
G01 X-71.31804 Y44.22161
G01 X-71.31783 Y44.22138
G01 X-71.26978 Y44.16845
G01 X-71.24966 Y44.14529
G01 X-71.16685 Y44.05004
G01 X-71.11910 Y44.00030
G01 X-71.10963 Y43.99136
G01 X-70.99728 Y43.90155
G01 X-70.96010 Y43.87379
G01 X-70.94026 Y43.86271
G01 X-70.80219 Y43.78844
G01 X-70.79264 Y43.78341
G01 X-70.73798 Y43.76319
G01 X-70.61245 Y43.72263
G01 X-70.58809 Y43.71694
G01 X-70.52042 Y43.70457
G01 X-70.42492 Y43.69190
G01 X-70.36439 Y43.68892
G01 X-70.29548 Y43.68892
G01 X-70.23488 Y43.69190
G01 X-70.13940 Y43.70457
G01 X-70.07173 Y43.71694
G01 X-70.04740 Y43.72263
G01 X-69.92185 Y43.76319
G01 X-69.86714 Y43.78341
G01 X-69.85766 Y43.78844
G01 X-69.71956 Y43.86271
G01 X-69.69973 Y43.87379
G01 X-69.66256 Y43.90155
G01 X-69.55020 Y43.99134
G01 X-69.54072 Y44.00030
G01 X-69.49299 Y44.05004
G01 X-69.41344 Y44.14153
G01 X-69.39030 Y44.16865
G01 X-69.34265 Y44.22171
G01 X-69.33767 Y44.22720
G01 X-69.29503 Y44.27379
G01 X-69.22853 Y44.33855
G01 X-69.15731 Y44.40068
G01 X-69.10664 Y44.44028
G01 X-69.06140 Y44.44275
G01 X-69.01319 Y44.44033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.10664 Y44.44028 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.10664 Y44.44028
G01 X-69.07641 Y44.54000
G01 X-69.05992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.96945 Y45.35542 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.96945 Y45.35542
G01 X-68.96119 Y45.37543
G01 X-68.88726 Y45.51376
G01 X-68.83386 Y45.59362
G01 X-68.73440 Y45.71485
G01 X-68.66648 Y45.78277
G01 X-68.54524 Y45.88227
G01 X-68.46539 Y45.93563
G01 X-68.32706 Y46.00957
G01 X-68.23831 Y46.04632
G01 X-68.08822 Y46.09184
G01 X-67.99404 Y46.11059
G01 X-67.85160 Y46.12461
G01 X-67.85160 Y46.80680
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.17161 Y45.73761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.17161 Y45.73761
G01 X-66.17159 Y46.96723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.90741 Y46.75679 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.90741 Y46.75679
G01 X-64.90741 Y46.36878
G01 X-65.15488 Y46.12133
G01 X-65.20192 Y46.12595
G01 X-65.29796 Y46.12595
G01 X-65.45404 Y46.11059
G01 X-65.54825 Y46.09184
G01 X-65.69834 Y46.04632
G01 X-65.78706 Y46.00957
G01 X-65.92539 Y45.93563
G01 X-66.00524 Y45.88227
G01 X-66.12648 Y45.78277
G01 X-66.17161 Y45.73761
G01 X-66.18447 Y45.70673
G01 X-66.21667 Y45.61663
G01 X-66.23301 Y45.57437
G01 X-66.24248 Y45.55146
G01 X-66.25912 Y45.50800
G01 X-66.27139 Y45.47320
G01 X-66.28693 Y45.43266
G01 X-66.31332 Y45.36896
G01 X-66.33181 Y45.32768
G01 X-66.34545 Y45.29949
G01 X-66.36397 Y45.25819
G01 X-66.37299 Y45.23642
G01 X-66.40695 Y45.16472
G01 X-66.43334 Y45.11534
G01 X-66.43984 Y45.10294
G01 X-66.45955 Y45.06456
G01 X-66.47281 Y45.03761
G01 X-66.51992 Y44.93805
G01 X-66.51992 Y44.62273
G01 X-66.53638 Y44.54000
G01 X-66.56666 Y44.44028
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.47321 Y44.44033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.47321 Y44.44033
G01 X-66.50344 Y44.54000
G01 X-66.51992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.96780 Y46.75671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.96780 Y46.75671
G01 X-68.00194 Y46.75671
G01 X-67.90631 Y46.76613
G01 X-67.87501 Y46.77563
G01 X-67.85160 Y46.80680
G01 X-67.76181 Y46.92656
G01 X-67.68177 Y47.24670
G01 X-67.68177 Y49.04675
G01 X-67.78177 Y49.40458
G01 X-67.78177 Y49.79475
G01 X-67.77138 Y49.82478
G01 X-67.75152 Y49.88597
G01 X-67.71649 Y50.05952
G01 X-67.71405 Y50.09051
G01 X-67.71184 Y50.14571
G01 X-67.71184 Y51.07761
G01 X-67.71103 Y51.11205
G01 X-67.70936 Y51.14621
G01 X-67.70425 Y51.18035
G01 X-67.69084 Y51.24781
G01 X-67.68253 Y51.28116
G01 X-67.67095 Y51.31347
G01 X-67.64464 Y51.37707
G01 X-67.62993 Y51.40814
G01 X-67.61230 Y51.43758
G01 X-67.57400 Y51.49485
G01 X-67.55358 Y51.52239
G01 X-67.53049 Y51.54789
G01 X-67.50677 Y51.57278
G01 X-67.43351 Y51.64603
G01 X-67.40217 Y51.67740
G01 X-67.33006 Y51.76191
G01 X-67.29366 Y51.81202
G01 X-67.17461 Y52.05040
G01 X-67.15340 Y52.11570
G01 X-67.14984 Y52.12731
G01 X-67.10585 Y52.17133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.16282 Y52.17303 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.16282 Y52.17303
G01 X-67.15028 Y52.12602
G01 X-67.15340 Y52.11570
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.99224 Y52.35937 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.99224 Y52.35937
G01 X-65.03443 Y52.42162
G01 X-65.04975 Y52.44705
G01 X-65.11426 Y52.66132
G01 X-65.11426 Y54.46132
G01 X-65.07720 Y54.62375
G01 X-65.04987 Y54.64499
G01 X-65.01442 Y54.67034
G01 X-64.96631 Y54.70056
G01 X-64.93631 Y54.71710
G01 X-64.91764 Y54.72787
G01 X-64.86372 Y54.76017
G01 X-64.80111 Y54.80216
G01 X-64.74718 Y54.84214
G01 X-64.66628 Y54.90882
G01 X-64.61939 Y54.95131
G01 X-64.07629 Y54.95131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.61939 Y54.95131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.61939 Y54.95131
G01 X-64.61871 Y54.95829
G01 X-64.61635 Y55.00630
G01 X-64.61635 Y56.25631
G01 X-64.61871 Y56.30434
G01 X-64.62399 Y56.35799
G01 X-64.64271 Y56.45220
G01 X-64.65836 Y56.50378
G01 X-64.69514 Y56.59253
G01 X-64.72054 Y56.64008
G01 X-64.77390 Y56.71994
G01 X-64.80812 Y56.76162
G01 X-64.87604 Y56.82954
G01 X-64.91769 Y56.86375
G01 X-64.99758 Y56.91712
G01 X-65.04512 Y56.94252
G01 X-65.13387 Y56.97927
G01 X-65.18546 Y56.99492
G01 X-65.27967 Y57.01366
G01 X-65.33331 Y57.01895
G01 X-65.38134 Y57.02131
G01 X-65.93133 Y57.02131
G01 X-65.97936 Y57.01895
G01 X-66.03301 Y57.01366
G01 X-66.08632 Y57.00307
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.08329 Y54.88852 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.08329 Y54.88852
G01 X-69.08329 Y53.59746
G01 X-69.31532 Y53.36546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.96856 Y52.27402 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.96856 Y52.27402
G01 X-71.08326 Y52.55972
G01 X-71.08326 Y54.35972
G01 X-71.04620 Y54.52215
G01 X-71.01885 Y54.54339
G01 X-70.98342 Y54.56874
G01 X-70.93531 Y54.59896
G01 X-70.90534 Y54.61550
G01 X-70.88664 Y54.62627
G01 X-70.83272 Y54.65857
G01 X-70.77011 Y54.70056
G01 X-70.75631 Y54.71077
G01 X-70.74496 Y54.74928
G01 X-70.73284 Y54.79637
G01 X-70.73043 Y54.81875
G01 X-70.72624 Y54.86373
G01 X-70.72591 Y54.87031
G01 X-70.72507 Y54.90473
G01 X-70.72507 Y56.15474
G01 X-70.72591 Y56.18913
G01 X-70.72624 Y56.19571
G01 X-70.73066 Y56.24282
G01 X-70.73284 Y56.26312
G01 X-70.74496 Y56.31016
G01 X-70.76020 Y56.36187
G01 X-70.76820 Y56.38727
G01 X-70.78690 Y56.42537
G01 X-70.81209 Y56.47305
G01 X-70.82690 Y56.49967
G01 X-70.85037 Y56.53002
G01 X-70.88451 Y56.57175
G01 X-70.90706 Y56.59797
G01 X-70.93330 Y56.62055
G01 X-70.97503 Y56.65466
G01 X-71.00539 Y56.67813
G01 X-71.03201 Y56.69296
G01 X-71.07968 Y56.71816
G01 X-71.11926 Y56.73751
G01 X-71.13698 Y56.74384
G01 X-71.14285 Y56.74590
G01 X-71.15497 Y56.75011
G01 X-71.19347 Y56.76477
G01 X-71.26043 Y56.79251
G01 X-71.29606 Y56.80828
G01 X-71.31229 Y56.81597
G01 X-71.35032 Y56.83282
G01 X-71.35578 Y56.83508
G01 X-71.50414 Y56.91971
G01 X-71.51687 Y56.92697
G01 X-71.52659 Y56.94610
G01 X-71.55050 Y57.03520
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.66558 Y56.91973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.66558 Y56.91973
G01 X-71.50414 Y56.91971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.40665 Y58.55453 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.40665 Y58.55453
G01 X-72.40569 Y58.56471
G01 X-72.40333 Y58.61272
G01 X-72.40333 Y59.87972
G01 X-72.33144 Y59.93870
G01 X-72.26353 Y60.00662
G01 X-72.15781 Y60.13542
G01 X-72.10444 Y60.21528
G01 X-72.02591 Y60.36225
G01 X-71.99332 Y60.44081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.99332 Y61.64611 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.99332 Y61.64611
G01 X-72.00142 Y61.66567
G01 X-72.00170 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.98420 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.98420 Y61.66677
G01 X-72.00173 Y61.66588
G01 X-72.06083 Y61.70614
G01 X-72.18506 Y61.80728
G01 X-72.19919 Y61.82112
G01 X-72.23144 Y61.85102
G01 X-72.25512 Y61.87174
G01 X-72.31453 Y61.93011
G01 X-72.37087 Y61.99227
G01 X-72.41953 Y62.04096
G01 X-72.46388 Y62.08114
G01 X-72.54849 Y62.14652
G01 X-72.60508 Y62.18594
G01 X-72.61575 Y62.19265
G01 X-72.75232 Y62.26392
G01 X-72.78331 Y62.27913
G01 X-72.81600 Y62.29028
G01 X-72.96294 Y62.33644
G01 X-72.97528 Y62.33926
G01 X-73.04310 Y62.35137
G01 X-73.14915 Y62.36499
G01 X-73.20891 Y62.36793
G01 X-73.27772 Y62.36793
G01 X-73.33749 Y62.36499
G01 X-73.44353 Y62.35137
G01 X-73.51138 Y62.33926
G01 X-73.52370 Y62.33644
G01 X-73.67066 Y62.29028
G01 X-73.70337 Y62.27913
G01 X-73.73434 Y62.26389
G01 X-73.87089 Y62.19265
G01 X-73.88158 Y62.18594
G01 X-73.93817 Y62.14652
G01 X-74.02275 Y62.08114
G01 X-74.06710 Y62.04096
G01 X-74.11574 Y61.99232
G01 X-74.17216 Y61.93009
G01 X-74.21168 Y61.88980
G01 X-74.23114 Y61.87144
G01 X-74.23439 Y61.86839
G01 X-74.28519 Y61.81990
G01 X-74.38148 Y61.74076
G01 X-74.42827 Y61.70743
G01 X-74.43716 Y61.70106
G01 X-74.48422 Y61.66679
G01 X-74.50170 Y61.66588
G01 X-74.50172 Y61.66588
G01 X-74.56083 Y61.70614
G01 X-74.68514 Y61.80733
G01 X-74.69921 Y61.82112
G01 X-74.73149 Y61.85107
G01 X-74.75511 Y61.87174
G01 X-74.81452 Y61.93011
G01 X-74.87086 Y61.99227
G01 X-74.91955 Y62.04098
G01 X-74.96380 Y62.08109
G01 X-75.04853 Y62.14652
G01 X-75.10507 Y62.18594
G01 X-75.11577 Y62.19265
G01 X-75.25232 Y62.26389
G01 X-75.28331 Y62.27913
G01 X-75.31600 Y62.29028
G01 X-75.46293 Y62.33644
G01 X-75.47528 Y62.33926
G01 X-75.54310 Y62.35137
G01 X-75.64914 Y62.36499
G01 X-75.70891 Y62.36793
G01 X-75.77772 Y62.36793
G01 X-75.83751 Y62.36499
G01 X-75.94353 Y62.35137
G01 X-76.01137 Y62.33926
G01 X-76.02372 Y62.33644
G01 X-76.17065 Y62.29028
G01 X-76.20334 Y62.27913
G01 X-76.23433 Y62.26389
G01 X-76.37088 Y62.19265
G01 X-76.38158 Y62.18594
G01 X-76.43814 Y62.14655
G01 X-76.44924 Y62.13796
G01 X-76.52277 Y62.08114
G01 X-76.56710 Y62.04098
G01 X-76.61579 Y61.99227
G01 X-76.67213 Y61.93011
G01 X-76.71180 Y61.88968
G01 X-76.73116 Y61.87141
G01 X-76.73451 Y61.86824
G01 X-76.78518 Y61.81990
G01 X-76.88147 Y61.74076
G01 X-76.92829 Y61.70743
G01 X-76.93713 Y61.70108
G01 X-76.98422 Y61.66679
G01 X-76.98422 Y61.66677
G01 X-77.00169 Y61.66588
G01 X-77.00172 Y61.66588
G01 X-77.06082 Y61.70614
G01 X-77.18513 Y61.80733
G01 X-77.19920 Y61.82112
G01 X-77.23149 Y61.85107
G01 X-77.25513 Y61.87177
G01 X-77.31449 Y61.93009
G01 X-77.37091 Y61.99232
G01 X-77.41955 Y62.04096
G01 X-77.46387 Y62.08114
G01 X-77.46552 Y62.08241
G01 X-77.54848 Y62.14652
G01 X-77.60507 Y62.18594
G01 X-77.61576 Y62.19265
G01 X-77.75231 Y62.26389
G01 X-77.78328 Y62.27913
G01 X-77.81599 Y62.29028
G01 X-77.96295 Y62.33644
G01 X-77.97527 Y62.33926
G01 X-78.04312 Y62.35137
G01 X-78.14916 Y62.36499
G01 X-78.20893 Y62.36793
G01 X-78.27774 Y62.36793
G01 X-78.33750 Y62.36499
G01 X-78.44355 Y62.35137
G01 X-78.51137 Y62.33926
G01 X-78.52371 Y62.33644
G01 X-78.67065 Y62.29028
G01 X-78.70334 Y62.27913
G01 X-78.73433 Y62.26392
G01 X-78.87090 Y62.19262
G01 X-78.88157 Y62.18594
G01 X-78.93819 Y62.14652
G01 X-78.94926 Y62.13794
G01 X-79.02277 Y62.08117
G01 X-79.06712 Y62.04096
G01 X-79.11578 Y61.99227
G01 X-79.17212 Y61.93011
G01 X-79.21180 Y61.88968
G01 X-79.23115 Y61.87141
G01 X-79.23450 Y61.86824
G01 X-79.28518 Y61.81990
G01 X-79.38147 Y61.74076
G01 X-79.42828 Y61.70743
G01 X-79.43712 Y61.70108
G01 X-79.48421 Y61.66679
G01 X-79.48421 Y61.66677
G01 X-79.48505 Y61.66618
G01 X-79.49333 Y61.64614
G01 X-79.49333 Y60.44083
G01 X-79.52589 Y60.36225
G01 X-79.60446 Y60.21528
G01 X-79.65782 Y60.13542
G01 X-79.76351 Y60.00662
G01 X-79.83146 Y59.93870
G01 X-79.90334 Y59.87970
G01 X-79.90334 Y59.34231
G01 X-79.90570 Y59.29430
G01 X-79.91223 Y59.22776
G01 X-79.91304 Y59.22603
G01 X-79.95884 Y59.14023
G01 X-79.99518 Y59.07957
G01 X-80.04349 Y59.00718
G01 X-80.08479 Y58.95148
G01 X-80.13641 Y58.88859
G01 X-80.18253 Y58.83769
G01 X-80.20991 Y58.80893
G01 X-81.60752 Y57.41133
G01 X-81.63491 Y57.38257
G01 X-81.68103 Y57.33167
G01 X-81.73264 Y57.26878
G01 X-81.77395 Y57.21308
G01 X-81.82226 Y57.14069
G01 X-81.85860 Y57.08003
G01 X-81.90440 Y56.99421
G01 X-81.90521 Y56.99250
G01 X-81.98664 Y56.91107
G01 X-82.07956 Y56.89261
G01 X-82.12497 Y56.88044
G01 X-82.19305 Y56.85926
G01 X-82.19559 Y56.85834
G01 X-82.25423 Y56.83985
G01 X-82.26942 Y56.83571
G01 X-82.33572 Y56.81420
G01 X-82.37506 Y56.79934
G01 X-82.38230 Y56.79662
G01 X-82.39576 Y56.79172
G01 X-82.40046 Y56.79002
G01 X-82.43285 Y56.77843
G01 X-82.46612 Y56.77008
G01 X-82.53358 Y56.75667
G01 X-82.56762 Y56.75161
G01 X-82.57051 Y56.75146
G01 X-82.60181 Y56.74922
G01 X-82.63633 Y56.74600
G01 X-82.68144 Y56.74031
G01 X-82.74260 Y56.73063
G01 X-82.99528 Y56.64625
G01 X-83.02266 Y56.63228
G01 X-83.07460 Y56.65875
G01 X-83.12853 Y56.68425
G01 X-83.20686 Y56.71679
G01 X-83.26076 Y56.73607
G01 X-83.32987 Y56.75707
G01 X-83.38380 Y56.77058
G01 X-83.44679 Y56.78313
G01 X-83.50069 Y56.79116
G01 X-83.56066 Y56.79708
G01 X-83.61456 Y56.79972
G01 X-83.64392 Y56.80043
G01 X-84.19393 Y56.80043
G01 X-84.22329 Y56.79972
G01 X-84.24636 Y56.79858
G01 X-84.27595 Y56.78458
G01 X-84.32690 Y56.75740
G01 X-84.37455 Y56.72883
G01 X-84.41671 Y56.70068
G01 X-84.46050 Y56.66822
G01 X-84.49693 Y56.63833
G01 X-84.53693 Y56.60211
G01 X-84.56949 Y56.56954
G01 X-84.60229 Y56.53335
G01 X-84.60412 Y56.52822
G01 X-84.61768 Y56.48364
G01 X-84.63119 Y56.42972
G01 X-84.63917 Y56.38974
G01 X-84.64714 Y56.33584
G01 X-84.65083 Y56.29860
G01 X-84.65347 Y56.24470
G01 X-84.65392 Y56.22652
G01 X-84.65392 Y54.97651
G01 X-84.65347 Y54.95835
G01 X-84.65083 Y54.90445
G01 X-84.64714 Y54.86721
G01 X-84.63917 Y54.81331
G01 X-84.63119 Y54.77333
G01 X-84.61768 Y54.71941
G01 X-84.60409 Y54.67475
G01 X-84.58481 Y54.62086
G01 X-84.56721 Y54.57752
G01 X-84.56073 Y54.57211
G01 X-84.54712 Y54.56094
G01 X-84.54064 Y54.55553
G01 X-84.52304 Y54.51219
G01 X-84.50376 Y54.45830
G01 X-84.49017 Y54.41364
G01 X-84.47666 Y54.35972
G01 X-84.46868 Y54.31974
G01 X-84.46071 Y54.26584
G01 X-84.45702 Y54.22860
G01 X-84.45438 Y54.17470
G01 X-84.45392 Y54.15652
G01 X-84.45392 Y52.90651
G01 X-84.45438 Y52.88835
G01 X-84.45702 Y52.83445
G01 X-84.46071 Y52.79721
G01 X-84.46868 Y52.74331
G01 X-84.47666 Y52.70333
G01 X-84.49017 Y52.64941
G01 X-84.50373 Y52.60483
G01 X-84.52301 Y52.55091
G01 X-84.54463 Y52.49889
G01 X-84.57013 Y52.44499
G01 X-84.60351 Y52.38276
G01 X-84.63581 Y52.32886
G01 X-84.68715 Y52.25231
G01 X-84.70686 Y52.22571
G01 X-84.63764 Y52.00410
G01 X-84.62797 Y51.94291
G01 X-84.61918 Y51.83201
G01 X-84.61918 Y51.77374
G01 X-84.62256 Y51.70489
G01 X-84.62637 Y51.66628
G01 X-84.62708 Y51.65924
G01 X-84.63259 Y51.64522
G01 X-84.65164 Y51.60113
G01 X-84.66050 Y51.58238
G01 X-84.68684 Y51.51878
G01 X-84.69840 Y51.48650
G01 X-84.70676 Y51.45312
G01 X-84.72019 Y51.38566
G01 X-84.72522 Y51.35167
G01 X-84.72692 Y51.31736
G01 X-84.72776 Y51.28291
G01 X-84.72776 Y45.83591
G01 X-84.72692 Y45.80147
G01 X-84.72522 Y45.76718
G01 X-84.72258 Y45.74937
G01 X-84.72019 Y45.73319
G01 X-84.70676 Y45.66576
G01 X-84.69843 Y45.63241
G01 X-84.68687 Y45.60010
G01 X-84.66053 Y45.53650
G01 X-84.64582 Y45.50546
G01 X-84.62819 Y45.47599
G01 X-84.58992 Y45.41872
G01 X-84.56947 Y45.39116
G01 X-84.54638 Y45.36568
G01 X-84.52266 Y45.34079
G01 X-84.44948 Y45.26759
G01 X-84.31534 Y45.13345
G01 X-84.30635 Y45.12430
G01 X-84.30125 Y45.11900
G01 X-84.22235 Y45.02110
G01 X-84.19243 Y44.97653
G01 X-84.19114 Y44.96787
G01 X-84.18301 Y44.87312
G01 X-84.18260 Y44.85316
G01 X-84.17986 Y44.80381
G01 X-84.16579 Y44.64879
G01 X-84.16561 Y44.64762
G01 X-84.15042 Y44.58039
G01 X-84.11824 Y44.46469
G01 X-84.10546 Y44.43012
G01 X-84.07846 Y44.36680
G01 X-84.04158 Y44.29085
G01 X-84.00462 Y44.22845
G01 X-83.96668 Y44.17102
G01 X-83.93782 Y44.13167
G01 X-83.86685 Y44.05004
G01 X-83.81910 Y44.00030
G01 X-83.80963 Y43.99136
G01 X-83.69728 Y43.90155
G01 X-83.66010 Y43.87379
G01 X-83.64029 Y43.86271
G01 X-83.50219 Y43.78844
G01 X-83.49264 Y43.78341
G01 X-83.43798 Y43.76319
G01 X-83.31245 Y43.72263
G01 X-83.28812 Y43.71694
G01 X-83.22042 Y43.70457
G01 X-83.12495 Y43.69190
G01 X-83.06439 Y43.68892
G01 X-82.99548 Y43.68892
G01 X-82.93490 Y43.69190
G01 X-82.83942 Y43.70457
G01 X-82.77173 Y43.71694
G01 X-82.74740 Y43.72263
G01 X-82.62187 Y43.76319
G01 X-82.56721 Y43.78341
G01 X-82.55766 Y43.78844
G01 X-82.41956 Y43.86271
G01 X-82.39975 Y43.87379
G01 X-82.36256 Y43.90155
G01 X-82.25022 Y43.99136
G01 X-82.24075 Y44.00030
G01 X-82.19299 Y44.05004
G01 X-82.11347 Y44.14153
G01 X-82.09030 Y44.16865
G01 X-82.04265 Y44.22171
G01 X-82.03767 Y44.22720
G01 X-81.99503 Y44.27379
G01 X-81.92853 Y44.33855
G01 X-81.85731 Y44.40068
G01 X-81.80666 Y44.44028
G01 X-81.76140 Y44.44275
G01 X-81.71321 Y44.44033
G01 X-81.70072 Y44.43058
G01 X-81.66366 Y44.40035
G01 X-81.59117 Y44.33863
G01 X-81.49231 Y44.23881
G01 X-81.47804 Y44.22161
G01 X-81.47783 Y44.22138
G01 X-81.42978 Y44.16845
G01 X-81.40966 Y44.14529
G01 X-81.32685 Y44.05004
G01 X-81.27910 Y44.00030
G01 X-81.26963 Y43.99136
G01 X-81.15728 Y43.90155
G01 X-81.12010 Y43.87379
G01 X-81.10029 Y43.86271
G01 X-80.96219 Y43.78844
G01 X-80.95264 Y43.78341
G01 X-80.89798 Y43.76319
G01 X-80.77245 Y43.72263
G01 X-80.74812 Y43.71694
G01 X-80.68042 Y43.70457
G01 X-80.58495 Y43.69190
G01 X-80.52439 Y43.68892
G01 X-80.45548 Y43.68892
G01 X-80.39490 Y43.69190
G01 X-80.29942 Y43.70457
G01 X-80.23173 Y43.71694
G01 X-80.20740 Y43.72263
G01 X-80.08187 Y43.76319
G01 X-80.02721 Y43.78341
G01 X-80.01766 Y43.78844
G01 X-79.87956 Y43.86271
G01 X-79.85975 Y43.87379
G01 X-79.82256 Y43.90155
G01 X-79.71022 Y43.99136
G01 X-79.70075 Y44.00030
G01 X-79.65299 Y44.05004
G01 X-79.57347 Y44.14153
G01 X-79.55030 Y44.16865
G01 X-79.50265 Y44.22171
G01 X-79.49767 Y44.22720
G01 X-79.45503 Y44.27379
G01 X-79.38853 Y44.33855
G01 X-79.31731 Y44.40068
G01 X-79.26666 Y44.44028
G01 X-79.22140 Y44.44275
G01 X-79.17321 Y44.44033
G01 X-79.16072 Y44.43058
G01 X-79.12366 Y44.40035
G01 X-79.05117 Y44.33863
G01 X-78.95231 Y44.23881
G01 X-78.93804 Y44.22161
G01 X-78.93783 Y44.22138
G01 X-78.88978 Y44.16845
G01 X-78.86966 Y44.14529
G01 X-78.78685 Y44.05004
G01 X-78.73910 Y44.00030
G01 X-78.72963 Y43.99136
G01 X-78.61728 Y43.90155
G01 X-78.58010 Y43.87379
G01 X-78.56029 Y43.86271
G01 X-78.42219 Y43.78844
G01 X-78.41264 Y43.78341
G01 X-78.35798 Y43.76319
G01 X-78.23245 Y43.72263
G01 X-78.20812 Y43.71694
G01 X-78.14042 Y43.70457
G01 X-78.04495 Y43.69190
G01 X-77.98439 Y43.68892
G01 X-77.91548 Y43.68892
G01 X-77.85490 Y43.69190
G01 X-77.75942 Y43.70457
G01 X-77.69173 Y43.71694
G01 X-77.66740 Y43.72263
G01 X-77.54187 Y43.76319
G01 X-77.48721 Y43.78341
G01 X-77.47766 Y43.78844
G01 X-77.33956 Y43.86271
G01 X-77.31975 Y43.87379
G01 X-77.28256 Y43.90155
G01 X-77.17022 Y43.99136
G01 X-77.16075 Y44.00030
G01 X-77.11299 Y44.05004
G01 X-77.03347 Y44.14153
G01 X-77.01030 Y44.16865
G01 X-76.96265 Y44.22171
G01 X-76.95767 Y44.22720
G01 X-76.91503 Y44.27379
G01 X-76.84853 Y44.33855
G01 X-76.77731 Y44.40068
G01 X-76.72666 Y44.44028
G01 X-76.68140 Y44.44275
G01 X-76.63321 Y44.44033
G01 X-76.62072 Y44.43058
G01 X-76.58366 Y44.40035
G01 X-76.51117 Y44.33863
G01 X-76.41231 Y44.23881
G01 X-76.39804 Y44.22161
G01 X-76.39783 Y44.22138
G01 X-76.34978 Y44.16845
G01 X-76.32966 Y44.14529
G01 X-76.24685 Y44.05004
G01 X-76.19910 Y44.00030
G01 X-76.18963 Y43.99136
G01 X-76.07728 Y43.90155
G01 X-76.04010 Y43.87379
G01 X-76.02029 Y43.86271
G01 X-75.88219 Y43.78844
G01 X-75.87264 Y43.78341
G01 X-75.81798 Y43.76319
G01 X-75.69245 Y43.72263
G01 X-75.66812 Y43.71694
G01 X-75.60042 Y43.70457
G01 X-75.50495 Y43.69190
G01 X-75.44439 Y43.68892
G01 X-75.37548 Y43.68892
G01 X-75.31490 Y43.69190
G01 X-75.21942 Y43.70457
G01 X-75.15173 Y43.71694
G01 X-75.12740 Y43.72263
G01 X-75.00187 Y43.76319
G01 X-74.94721 Y43.78341
G01 X-74.93766 Y43.78844
G01 X-74.79956 Y43.86271
G01 X-74.77975 Y43.87379
G01 X-74.74256 Y43.90155
G01 X-74.63022 Y43.99136
G01 X-74.62075 Y44.00030
G01 X-74.57299 Y44.05004
G01 X-74.49347 Y44.14153
G01 X-74.47030 Y44.16865
G01 X-74.42265 Y44.22171
G01 X-74.41767 Y44.22720
G01 X-74.37503 Y44.27379
G01 X-74.30853 Y44.33855
G01 X-74.23731 Y44.40068
G01 X-74.18666 Y44.44028
G01 X-74.14140 Y44.44275
G01 X-74.09321 Y44.44033
G01 X-74.08072 Y44.43058
G01 X-74.04366 Y44.40035
G01 X-73.97117 Y44.33863
G01 X-73.87231 Y44.23881
G01 X-73.85804 Y44.22161
G01 X-73.85783 Y44.22138
G01 X-73.80978 Y44.16845
G01 X-73.78966 Y44.14529
G01 X-73.70685 Y44.05004
G01 X-73.65910 Y44.00030
G01 X-73.64963 Y43.99136
G01 X-73.53728 Y43.90155
G01 X-73.50010 Y43.87379
G01 X-73.48029 Y43.86271
G01 X-73.34219 Y43.78844
G01 X-73.33264 Y43.78341
G01 X-73.27798 Y43.76319
G01 X-73.15245 Y43.72263
G01 X-73.12812 Y43.71694
G01 X-73.06042 Y43.70457
G01 X-72.96495 Y43.69190
G01 X-72.90439 Y43.68892
G01 X-72.83548 Y43.68892
G01 X-72.77490 Y43.69190
G01 X-72.67942 Y43.70457
G01 X-72.61173 Y43.71694
G01 X-72.58740 Y43.72263
G01 X-72.46187 Y43.76319
G01 X-72.40721 Y43.78341
G01 X-72.39766 Y43.78844
G01 X-72.25956 Y43.86271
G01 X-72.23975 Y43.87379
G01 X-72.20256 Y43.90155
G01 X-72.09022 Y43.99136
G01 X-72.08075 Y44.00030
G01 X-72.03299 Y44.05004
G01 X-71.95347 Y44.14153
G01 X-71.93030 Y44.16865
G01 X-71.88265 Y44.22171
G01 X-71.87767 Y44.22720
G01 X-71.83503 Y44.27379
G01 X-71.76853 Y44.33855
G01 X-71.69731 Y44.40068
G01 X-71.64666 Y44.44028
G01 X-71.60140 Y44.44275
G01 X-71.55321 Y44.44033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.64666 Y44.44028 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.64666 Y44.44028
G01 X-71.61641 Y44.54000
G01 X-71.59992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.59992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.59992 Y45.05374
G01 X-71.58347 Y45.13662
G01 X-71.53795 Y45.28671
G01 X-71.50119 Y45.37543
G01 X-71.42726 Y45.51376
G01 X-71.37389 Y45.59362
G01 X-71.27440 Y45.71485
G01 X-71.20648 Y45.78277
G01 X-71.08524 Y45.88227
G01 X-71.00539 Y45.93563
G01 X-70.86706 Y46.00957
G01 X-70.77834 Y46.04632
G01 X-70.64781 Y46.08590
G01 X-70.64781 Y46.77777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.05161 Y49.11081 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.05161 Y49.11081
G01 X-72.05164 Y50.43768
G01 X-71.93193 Y50.55736
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.92382 Y51.94108 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.92382 Y51.94108
G01 X-72.94770 Y52.03011
G01 X-72.96421 Y52.06252
G01 X-72.97691 Y52.06971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.79545 Y52.06973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.79545 Y52.06973
G01 X-72.92372 Y51.94146
G01 X-72.92382 Y51.94108
G01 X-72.92682 Y51.93028
G01 X-72.94803 Y51.86498
G01 X-73.06708 Y51.62660
G01 X-73.10348 Y51.57649
G01 X-73.17566 Y51.49191
G01 X-73.31359 Y51.35396
G01 X-73.38676 Y51.28078
G01 X-73.41049 Y51.25589
G01 X-73.43358 Y51.23039
G01 X-73.45402 Y51.20285
G01 X-73.49230 Y51.14558
G01 X-73.50993 Y51.11614
G01 X-73.52463 Y51.08507
G01 X-73.55095 Y51.02147
G01 X-73.56253 Y50.98914
G01 X-73.57086 Y50.95581
G01 X-73.58430 Y50.88835
G01 X-73.58933 Y50.85437
G01 X-73.59103 Y50.82005
G01 X-73.59187 Y50.78563
G01 X-73.59187 Y50.14571
G01 X-73.59405 Y50.09051
G01 X-73.59649 Y50.05952
G01 X-73.63152 Y49.88597
G01 X-73.65141 Y49.82478
G01 X-73.68087 Y49.74672
G01 X-73.68087 Y49.41513
G01 X-73.58087 Y49.04675
G01 X-73.58087 Y47.24670
G01 X-73.68087 Y46.87833
G01 X-73.68087 Y46.54424
G01 X-73.61033 Y46.31981
G01 X-73.60066 Y46.25862
G01 X-73.59187 Y46.14775
G01 X-73.59187 Y45.92771
G01 X-73.59215 Y45.90749
G01 X-73.59248 Y45.89606
G01 X-73.60891 Y45.76322
G01 X-73.61409 Y45.73942
G01 X-73.63754 Y45.70904
G01 X-73.66162 Y45.67940
G01 X-73.70685 Y45.62661
G01 X-73.78636 Y45.53515
G01 X-73.80955 Y45.50800
G01 X-73.85722 Y45.45494
G01 X-73.86205 Y45.44958
G01 X-73.90472 Y45.40299
G01 X-73.97132 Y45.33810
G01 X-74.04254 Y45.27597
G01 X-74.09316 Y45.23639
G01 X-74.13822 Y45.23391
G01 X-74.18664 Y45.23629
G01 X-74.19890 Y45.24587
G01 X-74.23622 Y45.27630
G01 X-74.30868 Y45.33802
G01 X-74.40749 Y45.43774
G01 X-74.42186 Y45.45511
G01 X-74.47007 Y45.50820
G01 X-74.49006 Y45.53119
G01 X-74.57299 Y45.62661
G01 X-74.62075 Y45.67635
G01 X-74.63022 Y45.68531
G01 X-74.74256 Y45.77510
G01 X-74.77980 Y45.80289
G01 X-74.79131 Y45.80942
G01 X-74.79954 Y45.81399
G01 X-74.85862 Y45.85072
G01 X-74.89489 Y45.87581
G01 X-74.93035 Y45.90192
G01 X-74.98841 Y45.94747
G01 X-75.00731 Y46.03395
G01 X-75.01699 Y46.09514
G01 X-75.02577 Y46.20601
G01 X-75.02577 Y46.89651
G01 X-75.19806 Y47.24670
G01 X-75.19806 Y49.04675
G01 X-75.16100 Y49.20916
G01 X-75.13367 Y49.23039
G01 X-75.09822 Y49.25574
G01 X-75.05011 Y49.28597
G01 X-75.02014 Y49.30250
G01 X-75.00144 Y49.31327
G01 X-74.94752 Y49.34558
G01 X-74.88491 Y49.38757
G01 X-74.87111 Y49.39780
G01 X-74.85976 Y49.43628
G01 X-74.84767 Y49.48332
G01 X-74.84546 Y49.50362
G01 X-74.84104 Y49.55084
G01 X-74.84071 Y49.55732
G01 X-74.83987 Y49.59171
G01 X-74.83987 Y50.84172
G01 X-74.84071 Y50.87613
G01 X-74.84104 Y50.88271
G01 X-74.84546 Y50.92983
G01 X-74.84764 Y50.95007
G01 X-74.85976 Y50.99717
G01 X-74.87500 Y51.04888
G01 X-74.88300 Y51.07425
G01 X-74.90170 Y51.11238
G01 X-74.92689 Y51.16006
G01 X-74.94173 Y51.18667
G01 X-74.96520 Y51.21703
G01 X-74.99931 Y51.25876
G01 X-75.02186 Y51.28500
G01 X-75.04810 Y51.30753
G01 X-75.07904 Y51.33283
G01 X-75.08976 Y51.34177
G01 X-75.13517 Y51.38045
G01 X-75.14315 Y51.38713
G01 X-75.16723 Y51.40707
G01 X-75.18534 Y51.42254
G01 X-75.24472 Y51.47491
G01 X-75.28851 Y51.51621
G01 X-75.33685 Y51.56485
G01 X-75.35435 Y51.58210
G01 X-75.33997 Y51.62632
G01 X-75.22110 Y51.86437
G01 X-75.18470 Y51.91449
G01 X-75.11241 Y51.99920
G01 X-74.44599 Y52.66561
G01 X-74.36276 Y52.73684
G01 X-74.31351 Y52.77278
G01 X-74.07899 Y52.89109
G01 X-74.01397 Y52.91258
G01 X-73.99761 Y52.91751
G01 X-73.99756 Y52.91748
G01 X-73.93533 Y52.90140
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.01397 Y52.91258 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.01397 Y52.91258
G01 X-73.99756 Y52.91748
G01 X-73.99601 Y52.91796
G01 X-73.93533 Y52.97864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.36093 Y54.65377 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.36093 Y54.65377
G01 X-75.36093 Y53.92893
G01 X-76.02092 Y53.26894
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.14835 Y52.14151 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.14835 Y52.14151
G01 X-77.47680 Y52.14151
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.47680 Y51.81306 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.47680 Y51.81306
G01 X-77.47680 Y52.14151
G01 X-77.61091 Y52.27565
G01 X-77.78886 Y52.63153
G01 X-77.78886 Y54.43152
G01 X-77.75180 Y54.59396
G01 X-77.72447 Y54.61519
G01 X-77.68902 Y54.64054
G01 X-77.64091 Y54.67077
G01 X-77.61091 Y54.68730
G01 X-77.59224 Y54.69807
G01 X-77.53832 Y54.73038
G01 X-77.47571 Y54.77237
G01 X-77.46191 Y54.78258
G01 X-77.45056 Y54.82108
G01 X-77.43844 Y54.86815
G01 X-77.43626 Y54.88842
G01 X-77.43184 Y54.93554
G01 X-77.43151 Y54.94212
G01 X-77.43067 Y54.97651
G01 X-77.43067 Y56.22652
G01 X-77.43151 Y56.26093
G01 X-77.43184 Y56.26749
G01 X-77.43626 Y56.31463
G01 X-77.43712 Y56.32314
G01 X-77.43847 Y56.33492
G01 X-77.45056 Y56.38196
G01 X-77.46580 Y56.43368
G01 X-77.47380 Y56.45908
G01 X-77.49250 Y56.49718
G01 X-77.51304 Y56.53607
G01 X-77.51764 Y56.54488
G01 X-77.52628 Y56.56182
G01 X-77.53400 Y56.57650
G01 X-77.55023 Y56.60655
G01 X-77.57472 Y56.65618
G01 X-77.60057 Y56.71382
G01 X-77.60802 Y56.73000
G01 X-77.62933 Y56.77503
G01 X-77.63349 Y56.78395
G01 X-77.67700 Y56.87851
G01 X-77.68274 Y56.89195
G01 X-77.65600 Y56.97432
G01 X-77.61012 Y57.05379
G01 X-77.60989 Y57.05392
G01 X-77.60014 Y57.05966
G01 X-77.53895 Y57.09083
G01 X-77.28627 Y57.17521
G01 X-77.22508 Y57.18488
G01 X-77.11421 Y57.19367
G01 X-76.75615 Y57.19367
G01 X-76.72171 Y57.19451
G01 X-76.68747 Y57.19621
G01 X-76.65341 Y57.20127
G01 X-76.58594 Y57.21468
G01 X-76.55259 Y57.22304
G01 X-76.52029 Y57.23459
G01 X-76.45668 Y57.26093
G01 X-76.42562 Y57.27561
G01 X-76.39618 Y57.29324
G01 X-76.33890 Y57.33152
G01 X-76.31135 Y57.35197
G01 X-76.28587 Y57.37505
G01 X-76.26098 Y57.39878
G01 X-75.98808 Y57.67165
G01 X-75.92605 Y57.72677
G01 X-75.88953 Y57.75557
G01 X-75.70103 Y57.86482
G01 X-75.63985 Y57.89014
G01 X-75.55155 Y57.91056
G01 X-75.14935 Y58.31277
G01 X-75.11704 Y58.34841
G01 X-75.07353 Y58.40144
G01 X-75.02016 Y58.48130
G01 X-74.98780 Y58.54180
G01 X-74.95105 Y58.63055
G01 X-74.93113 Y58.69621
G01 X-74.91239 Y58.79042
G01 X-74.91183 Y58.79608
G01 X-74.90568 Y58.85872
G01 X-74.90332 Y58.90672
G01 X-74.90332 Y59.87972
G01 X-74.83144 Y59.93870
G01 X-74.76352 Y60.00662
G01 X-74.65781 Y60.13542
G01 X-74.60444 Y60.21528
G01 X-74.52590 Y60.36225
G01 X-74.49334 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.49334 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.49334 Y61.64614
G01 X-74.50142 Y61.66567
G01 X-74.50170 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.43716 Y61.70106 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.43716 Y61.70106
G01 X-74.48503 Y61.66618
G01 X-74.49334 Y61.64614
G01 X-74.49334 Y60.44083
G01 X-74.46078 Y60.36225
G01 X-74.38222 Y60.21528
G01 X-74.32885 Y60.13542
G01 X-74.24833 Y60.03730
G01 X-74.22316 Y60.00662
G01 X-74.15524 Y59.93870
G01 X-74.08331 Y59.87967
G01 X-74.08331 Y58.96067
G01 X-75.11490 Y57.92908
G01 X-75.14721 Y57.89344
G01 X-75.19072 Y57.84041
G01 X-75.24409 Y57.76055
G01 X-75.24470 Y57.75941
G01 X-75.23543 Y57.67810
G01 X-75.22837 Y57.58557
G01 X-75.22598 Y57.53050
G01 X-75.22580 Y57.51308
G01 X-75.22397 Y57.46682
G01 X-75.22202 Y57.43868
G01 X-75.22049 Y57.36957
G01 X-75.22092 Y57.35400
G01 X-75.22118 Y57.33513
G01 X-75.22118 Y55.13980
G01 X-75.22844 Y55.03897
G01 X-75.23649 Y54.98306
G01 X-75.30985 Y54.74595
G01 X-75.33893 Y54.68479
G01 X-75.36093 Y54.65377
G01 X-75.37363 Y54.63592
G01 X-75.41074 Y54.61166
G01 X-75.50624 Y54.57463
G01 X-75.60736 Y54.55827
G01 X-75.66845 Y54.55487
G01 X-75.77073 Y54.55990
G01 X-75.86974 Y54.58606
G01 X-75.96116 Y54.63224
G01 X-76.01259 Y54.66538
G01 X-76.07378 Y54.71202
G01 X-76.12694 Y54.76764
G01 X-76.14843 Y54.79401
G01 X-76.22092 Y54.85311
G01 X-76.22092 Y54.82434
G01 X-76.16446 Y54.77801
G01 X-76.10352 Y54.70374
G01 X-76.05823 Y54.61903
G01 X-76.03034 Y54.52710
G01 X-76.02095 Y54.43152
G01 X-76.02095 Y53.90912
G01 X-76.02092 Y53.26894
G01 X-76.28495 Y52.63153
G01 X-76.51094 Y52.40554
G01 X-77.14835 Y52.14151
G01 X-77.47680 Y51.81306
G01 X-77.55137 Y51.63305
G01 X-77.56679 Y51.59310
G01 X-77.59135 Y51.52447
G01 X-77.61310 Y51.45297
G01 X-77.63027 Y51.38436
G01 X-77.64317 Y51.31967
G01 X-77.65335 Y51.25106
G01 X-77.65935 Y51.19026
G01 X-77.66273 Y51.12163
G01 X-77.66346 Y51.09181
G01 X-77.66346 Y49.20768
G01 X-77.66872 Y49.19658
G01 X-77.69199 Y49.14050
G01 X-77.71129 Y49.08663
G01 X-77.72607 Y49.03804
G01 X-77.73956 Y48.98411
G01 X-77.74830 Y48.94037
G01 X-77.75630 Y48.88648
G01 X-77.76031 Y48.84561
G01 X-77.76298 Y48.79171
G01 X-77.76346 Y48.77172
G01 X-77.76346 Y47.52171
G01 X-77.76298 Y47.50174
G01 X-77.76031 Y47.44785
G01 X-77.75630 Y47.40698
G01 X-77.74830 Y47.35308
G01 X-77.73956 Y47.30934
G01 X-77.72607 Y47.25541
G01 X-77.71132 Y47.20690
G01 X-77.69204 Y47.15300
G01 X-77.66867 Y47.09674
G01 X-77.64314 Y47.04284
G01 X-77.60730 Y46.97596
G01 X-77.57497 Y46.92207
G01 X-77.52018 Y46.84033
G01 X-77.48020 Y46.78640
G01 X-77.47677 Y46.78224
G01 X-77.38681 Y46.76436
G01 X-77.33316 Y46.75907
G01 X-77.28513 Y46.75671
G01 X-76.73514 Y46.75671
G01 X-76.68711 Y46.75907
G01 X-76.63347 Y46.76436
G01 X-76.56601 Y46.77777
G01 X-76.54513 Y46.80314
G01 X-76.50515 Y46.85704
G01 X-76.45249 Y46.93558
G01 X-76.42018 Y46.98950
G01 X-76.38584 Y47.05351
G01 X-76.36034 Y47.10741
G01 X-76.33807 Y47.16108
G01 X-76.31876 Y47.21498
G01 X-76.30477 Y47.26108
G01 X-76.29125 Y47.31500
G01 X-76.28297 Y47.35641
G01 X-76.27500 Y47.41033
G01 X-76.27116 Y47.44894
G01 X-76.26852 Y47.50286
G01 X-76.26806 Y47.52171
G01 X-76.26806 Y48.77172
G01 X-76.26852 Y48.79059
G01 X-76.27116 Y48.84451
G01 X-76.27500 Y48.88312
G01 X-76.28297 Y48.93705
G01 X-76.29125 Y48.97845
G01 X-76.30477 Y49.03237
G01 X-76.31879 Y49.07855
G01 X-76.33809 Y49.13245
G01 X-76.34830 Y49.15887
G01 X-76.36832 Y49.17614
G01 X-76.38193 Y49.18731
G01 X-76.38841 Y49.19272
G01 X-76.40601 Y49.23606
G01 X-76.42529 Y49.28995
G01 X-76.43888 Y49.33461
G01 X-76.45239 Y49.38853
G01 X-76.46037 Y49.42851
G01 X-76.46834 Y49.48241
G01 X-76.47203 Y49.51965
G01 X-76.47467 Y49.57355
G01 X-76.47512 Y49.59171
G01 X-76.47512 Y50.84172
G01 X-76.47467 Y50.85990
G01 X-76.47418 Y50.86981
G01 X-76.45422 Y50.91205
G01 X-76.43829 Y50.94192
G01 X-76.40972 Y50.98957
G01 X-76.39372 Y51.01355
G01 X-76.36123 Y51.05734
G01 X-76.34480 Y51.07738
G01 X-76.30855 Y51.11738
G01 X-76.29077 Y51.13516
G01 X-76.25077 Y51.17141
G01 X-76.23067 Y51.18789
G01 X-76.18689 Y51.22035
G01 X-76.16303 Y51.23628
G01 X-76.11536 Y51.26486
G01 X-76.08544 Y51.28083
G01 X-76.03370 Y51.30529
G01 X-76.01513 Y51.31352
G01 X-75.46514 Y51.54133
G01 X-75.42166 Y51.55810
G01 X-75.36553 Y51.57819
G01 X-75.35435 Y51.58210
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.21992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.21992 Y45.05374
G01 X-79.23641 Y45.13662
G01 X-79.28193 Y45.28671
G01 X-79.31868 Y45.37543
G01 X-79.39262 Y45.51376
G01 X-79.44598 Y45.59362
G01 X-79.54548 Y45.71485
G01 X-79.61058 Y45.77993
G01 X-79.61340 Y45.78277
G01 X-79.73463 Y45.88227
G01 X-79.81449 Y45.93563
G01 X-79.95282 Y46.00957
G01 X-80.04154 Y46.04632
G01 X-80.19163 Y46.09184
G01 X-80.28584 Y46.11059
G01 X-80.44192 Y46.12595
G01 X-80.53796 Y46.12595
G01 X-80.58500 Y46.12133
G01 X-80.75342 Y46.28976
G01 X-80.75340 Y46.75671
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.18751 Y46.75844 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.18751 Y46.75844
G01 X-83.18753 Y46.18386
G01 X-83.12500 Y46.12133
G01 X-83.07796 Y46.12595
G01 X-82.98192 Y46.12595
G01 X-82.82584 Y46.11059
G01 X-82.73163 Y46.09184
G01 X-82.58154 Y46.04632
G01 X-82.49282 Y46.00957
G01 X-82.43338 Y45.97779
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.75992 Y44.62273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.75992 Y44.62273
G01 X-81.77641 Y44.54000
G01 X-81.80666 Y44.44028
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-81.71321 Y44.44033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-81.71321 Y44.44033
G01 X-81.74347 Y44.54000
G01 X-81.75992 Y44.62273
G01 X-81.75992 Y44.93807
G01 X-81.80702 Y45.03761
G01 X-81.84821 Y45.11483
G01 X-81.93132 Y45.25351
G01 X-81.97222 Y45.31475
G01 X-82.06663 Y45.44211
G01 X-82.07811 Y45.45712
G01 X-82.09840 Y45.48295
G01 X-82.10732 Y45.49405
G01 X-82.14181 Y45.53609
G01 X-82.18098 Y45.58890
G01 X-82.20150 Y45.61963
G01 X-82.21992 Y45.64587
G01 X-82.24164 Y45.67528
G01 X-82.26135 Y45.70337
G01 X-82.30120 Y45.76299
G01 X-82.33183 Y45.81259
G01 X-82.34369 Y45.83342
G01 X-82.37882 Y45.89016
G01 X-82.38431 Y45.89834
G01 X-82.41182 Y45.94180
G01 X-82.43338 Y45.97779
G01 X-82.43341 Y46.77777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.15681 Y49.60618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.15681 Y49.60618
G01 X-79.15681 Y45.28943
G01 X-79.15795 Y45.28671
G01 X-79.20347 Y45.13662
G01 X-79.21992 Y45.05374
G01 X-79.21992 Y44.62273
G01 X-79.20347 Y44.54000
G01 X-79.17321 Y44.44033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.26666 Y44.44028 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.26666 Y44.44028
G01 X-79.23641 Y44.54000
G01 X-79.21992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.47677 Y46.78224 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.47677 Y46.78224
G01 X-77.47682 Y46.03606
G01 X-77.41282 Y46.00957
G01 X-77.27449 Y45.93563
G01 X-77.19463 Y45.88227
G01 X-77.07340 Y45.78277
G01 X-77.00548 Y45.71485
G01 X-76.90598 Y45.59362
G01 X-76.85262 Y45.51376
G01 X-76.77868 Y45.37543
G01 X-76.74193 Y45.28671
G01 X-76.69641 Y45.13662
G01 X-76.67992 Y45.05374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.67992 Y44.62273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.67992 Y44.62273
G01 X-76.69641 Y44.54000
G01 X-76.72666 Y44.44028
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.63321 Y44.44033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.63321 Y44.44033
G01 X-76.66347 Y44.54000
G01 X-76.67992 Y44.62273
G01 X-76.67992 Y45.05374
G01 X-76.66347 Y45.13662
G01 X-76.61795 Y45.28671
G01 X-76.58119 Y45.37543
G01 X-76.56601 Y45.40383
G01 X-76.56601 Y46.77777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.18664 Y45.23629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.18664 Y45.23629
G01 X-74.15641 Y45.13662
G01 X-74.13992 Y45.05374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.13992 Y44.62273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.13992 Y44.62273
G01 X-74.15641 Y44.54000
G01 X-74.18666 Y44.44028
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.09321 Y44.44033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.09321 Y44.44033
G01 X-74.12347 Y44.54000
G01 X-74.13992 Y44.62273
G01 X-74.13992 Y45.05374
G01 X-74.12347 Y45.13662
G01 X-74.09316 Y45.23639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.05161 Y47.18259 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.05161 Y47.18259
G01 X-72.02774 Y47.13794
G01 X-71.97437 Y47.05808
G01 X-71.94016 Y47.01640
G01 X-71.87224 Y46.94848
G01 X-71.83058 Y46.91429
G01 X-71.75070 Y46.86093
G01 X-71.70315 Y46.83550
G01 X-71.63762 Y46.80835
G01 X-71.61440 Y46.79875
G01 X-71.56282 Y46.78310
G01 X-71.46861 Y46.76436
G01 X-71.41496 Y46.75907
G01 X-71.36693 Y46.75671
G01 X-70.81694 Y46.75671
G01 X-70.76891 Y46.75907
G01 X-70.71527 Y46.76436
G01 X-70.64781 Y46.77777
G01 X-70.62693 Y46.80314
G01 X-70.58695 Y46.85704
G01 X-70.53429 Y46.93558
G01 X-70.50198 Y46.98950
G01 X-70.46764 Y47.05351
G01 X-70.44214 Y47.10741
G01 X-70.41987 Y47.16108
G01 X-70.40054 Y47.21498
G01 X-70.38657 Y47.26108
G01 X-70.37305 Y47.31500
G01 X-70.36477 Y47.35641
G01 X-70.35680 Y47.41033
G01 X-70.35294 Y47.44894
G01 X-70.35032 Y47.50286
G01 X-70.34986 Y47.52171
G01 X-70.34986 Y48.77172
G01 X-70.35032 Y48.79059
G01 X-70.35294 Y48.84451
G01 X-70.35680 Y48.88312
G01 X-70.36477 Y48.93705
G01 X-70.37305 Y48.97845
G01 X-70.38657 Y49.03237
G01 X-70.40056 Y49.07855
G01 X-70.41989 Y49.13245
G01 X-70.43008 Y49.15887
G01 X-70.45009 Y49.17614
G01 X-70.46373 Y49.18731
G01 X-70.47021 Y49.19272
G01 X-70.48781 Y49.23606
G01 X-70.50706 Y49.28995
G01 X-70.52068 Y49.33461
G01 X-70.53417 Y49.38853
G01 X-70.54217 Y49.42851
G01 X-70.55014 Y49.48241
G01 X-70.55383 Y49.51965
G01 X-70.55644 Y49.57355
G01 X-70.55692 Y49.59171
G01 X-70.55692 Y50.84172
G01 X-70.55644 Y50.85990
G01 X-70.55383 Y50.91380
G01 X-70.55014 Y50.95104
G01 X-70.54217 Y51.00494
G01 X-70.54080 Y51.01355
G01 X-70.52332 Y51.03910
G01 X-70.49086 Y51.08289
G01 X-70.46769 Y51.11111
G01 X-70.43147 Y51.15109
G01 X-70.40628 Y51.17629
G01 X-70.36630 Y51.21253
G01 X-70.33800 Y51.23570
G01 X-70.29424 Y51.26816
G01 X-70.26122 Y51.29020
G01 X-70.21354 Y51.31878
G01 X-70.17310 Y51.34037
G01 X-70.12657 Y51.36239
G01 X-70.12114 Y51.36265
G01 X-70.09693 Y51.36323
G01 X-69.54692 Y51.36323
G01 X-69.53313 Y51.36305
G01 X-69.52271 Y51.36275
G01 X-69.50874 Y51.36257
G01 X-69.46856 Y51.36257
G01 X-69.43971 Y51.36176
G01 X-69.41763 Y51.36051
G01 X-69.38692 Y51.35965
G01 X-69.36155 Y51.35962
G01 X-69.31466 Y51.35777
G01 X-69.30224 Y51.35678
G01 X-69.24862 Y51.35472
G01 X-69.24222 Y51.35472
G01 X-69.16894 Y51.35124
G01 X-69.16414 Y51.35078
G01 X-69.09749 Y51.34705
G01 X-69.08063 Y51.34667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.80915 Y52.58025 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.80915 Y52.58025
G01 X-67.73323 Y52.53463
G01 X-67.68578 Y52.50384
G01 X-67.67601 Y52.49701
G01 X-67.62411 Y52.46371
G01 X-67.62340 Y52.46333
G01 X-67.57822 Y52.43463
G01 X-67.54941 Y52.41476
G01 X-67.52165 Y52.39917
G01 X-67.51952 Y52.39803
G01 X-67.51225 Y52.39422
G01 X-67.47248 Y52.37158
G01 X-67.41657 Y52.33729
G01 X-67.41202 Y52.33453
G01 X-67.36440 Y52.30580
G01 X-67.29462 Y52.26386
G01 X-67.24370 Y52.23092
G01 X-67.20130 Y52.20156
G01 X-67.16285 Y52.17306
G01 X-67.16282 Y52.17303
G01 X-67.16049 Y52.17131
G01 X-67.10585 Y52.17133
G01 X-66.65134 Y52.35960
G01 X-66.62285 Y52.37222
G01 X-66.57108 Y52.39670
G01 X-66.52353 Y52.42208
G01 X-66.47586 Y52.45065
G01 X-66.43643 Y52.47697
G01 X-66.39265 Y52.50943
G01 X-66.35869 Y52.53727
G01 X-66.31866 Y52.57354
G01 X-66.28848 Y52.60372
G01 X-66.25228 Y52.64369
G01 X-66.22450 Y52.67755
G01 X-66.21843 Y52.68573
G01 X-66.20745 Y52.72960
G01 X-66.19917 Y52.77100
G01 X-66.19117 Y52.82492
G01 X-66.18736 Y52.86353
G01 X-66.18470 Y52.91746
G01 X-66.18426 Y52.93633
G01 X-66.18426 Y54.18634
G01 X-66.18470 Y54.20519
G01 X-66.18736 Y54.25911
G01 X-66.19117 Y54.29772
G01 X-66.19917 Y54.35164
G01 X-66.20745 Y54.39304
G01 X-66.22097 Y54.44697
G01 X-66.23496 Y54.49307
G01 X-66.25427 Y54.54697
G01 X-66.26448 Y54.57346
G01 X-66.28459 Y54.59081
G01 X-66.29813 Y54.60191
G01 X-66.30458 Y54.60729
G01 X-66.32219 Y54.65068
G01 X-66.34149 Y54.70455
G01 X-66.35505 Y54.74920
G01 X-66.36854 Y54.80313
G01 X-66.37654 Y54.84311
G01 X-66.38452 Y54.89700
G01 X-66.38823 Y54.93424
G01 X-66.39087 Y54.98814
G01 X-66.39127 Y55.00633
G01 X-66.39127 Y56.25634
G01 X-66.39087 Y56.27450
G01 X-66.38823 Y56.32840
G01 X-66.38452 Y56.36563
G01 X-66.37654 Y56.41953
G01 X-66.36854 Y56.45951
G01 X-66.35505 Y56.51344
G01 X-66.34151 Y56.55801
G01 X-66.32221 Y56.61191
G01 X-66.30060 Y56.66393
G01 X-66.27509 Y56.71785
G01 X-66.24182 Y56.77993
G01 X-66.20951 Y56.83386
G01 X-66.15797 Y56.91072
G01 X-66.11799 Y56.96464
G01 X-66.08632 Y57.00307
G01 X-66.08632 Y57.21577
G01 X-65.82805 Y57.47404
G01 X-65.14937 Y58.15275
G01 X-65.11706 Y58.18839
G01 X-65.07355 Y58.24142
G01 X-65.02018 Y58.32128
G01 X-64.98782 Y58.38181
G01 X-64.95107 Y58.47053
G01 X-64.93115 Y58.53619
G01 X-64.91241 Y58.63040
G01 X-64.90570 Y58.69870
G01 X-64.90334 Y58.74670
G01 X-64.90334 Y59.87970
G01 X-64.83143 Y59.93870
G01 X-64.76351 Y60.00662
G01 X-64.65783 Y60.13542
G01 X-64.60443 Y60.21528
G01 X-64.58002 Y60.26090
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.58000 Y61.82602 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.58000 Y61.82602
G01 X-64.58897 Y61.84284
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.57822 Y61.84451 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.57822 Y61.84451
G01 X-64.58897 Y61.84284
G01 X-64.60451 Y61.85056
G01 X-64.62481 Y61.86087
G01 X-64.71259 Y61.90667
G01 X-64.84794 Y61.99460
G01 X-64.85813 Y62.00281
G01 X-64.86704 Y62.00984
G01 X-64.91632 Y62.04492
G01 X-64.95005 Y62.07047
G01 X-65.04848 Y62.14652
G01 X-65.10507 Y62.18594
G01 X-65.11576 Y62.19265
G01 X-65.25231 Y62.26389
G01 X-65.28327 Y62.27913
G01 X-65.31599 Y62.29028
G01 X-65.46295 Y62.33644
G01 X-65.47527 Y62.33926
G01 X-65.54312 Y62.35137
G01 X-65.64916 Y62.36499
G01 X-65.70893 Y62.36793
G01 X-65.77774 Y62.36793
G01 X-65.83750 Y62.36499
G01 X-65.94355 Y62.35137
G01 X-66.01137 Y62.33926
G01 X-66.02371 Y62.33644
G01 X-66.17065 Y62.29028
G01 X-66.20331 Y62.27913
G01 X-66.23433 Y62.26392
G01 X-66.37090 Y62.19262
G01 X-66.38157 Y62.18594
G01 X-66.43819 Y62.14652
G01 X-66.44924 Y62.13794
G01 X-66.52277 Y62.08117
G01 X-66.56712 Y62.04096
G01 X-66.61578 Y61.99227
G01 X-66.67212 Y61.93011
G01 X-66.71180 Y61.88968
G01 X-66.73115 Y61.87141
G01 X-66.73450 Y61.86824
G01 X-66.78518 Y61.81990
G01 X-66.88144 Y61.74078
G01 X-66.92826 Y61.70743
G01 X-66.93707 Y61.70111
G01 X-66.98421 Y61.66679
G01 X-66.98421 Y61.66677
G01 X-66.98505 Y61.66618
G01 X-66.99330 Y61.64614
G01 X-66.99330 Y60.44083
G01 X-66.96077 Y60.36225
G01 X-66.88223 Y60.21528
G01 X-66.82884 Y60.13542
G01 X-66.74830 Y60.03728
G01 X-66.72312 Y60.00662
G01 X-66.65523 Y59.93870
G01 X-66.58332 Y59.87970
G01 X-66.58332 Y59.09466
G01 X-67.40326 Y58.27467
G01 X-67.47181 Y58.10924
G01 X-67.48746 Y58.06870
G01 X-67.51202 Y58.00010
G01 X-67.53410 Y57.92748
G01 X-67.55127 Y57.85887
G01 X-67.56440 Y57.79314
G01 X-67.57456 Y57.72451
G01 X-67.58068 Y57.66268
G01 X-67.58406 Y57.59405
G01 X-67.58479 Y57.56370
G01 X-67.58479 Y54.62474
G01 X-67.58886 Y54.61618
G01 X-67.61271 Y54.55873
G01 X-67.63196 Y54.50480
G01 X-67.64708 Y54.45520
G01 X-67.66059 Y54.40127
G01 X-67.66953 Y54.35649
G01 X-67.67753 Y54.30259
G01 X-67.68164 Y54.26071
G01 X-67.68431 Y54.20681
G01 X-67.68482 Y54.18634
G01 X-67.68482 Y53.24951
G01 X-67.68530 Y53.22901
G01 X-67.68868 Y53.16041
G01 X-67.69280 Y53.11842
G01 X-67.70301 Y53.04979
G01 X-67.71205 Y53.00448
G01 X-67.72909 Y52.93633
G01 X-67.72922 Y52.93590
G01 X-67.73549 Y52.91080
G01 X-67.74306 Y52.88337
G01 X-67.75167 Y52.85502
G01 X-67.76328 Y52.81116
G01 X-67.76745 Y52.79277
G01 X-67.77113 Y52.77737
G01 X-67.78253 Y52.73186
G01 X-67.79922 Y52.64723
G01 X-67.80908 Y52.58083
G01 X-67.80915 Y52.58025
G01 X-67.91116 Y52.53033
G01 X-67.96605 Y52.49874
G01 X-68.09081 Y52.40869
G01 X-68.10651 Y52.39460
G01 X-68.13371 Y52.36882
G01 X-68.51271 Y51.98982
G01 X-68.88939 Y51.61317
G01 X-68.96155 Y51.52856
G01 X-68.99797 Y51.47844
G01 X-69.01992 Y51.44657
G01 X-69.04095 Y51.41423
G01 X-69.07811 Y51.35134
G01 X-69.08063 Y51.34667
G01 X-69.05416 Y51.28088
G01 X-69.04176 Y51.25185
G01 X-69.03173 Y51.22952
G01 X-69.01682 Y51.19386
G01 X-69.00453 Y51.16226
G01 X-68.98299 Y51.11263
G01 X-68.97562 Y51.09722
G01 X-68.97519 Y51.09633
G01 X-68.97067 Y51.08683
G01 X-68.96475 Y51.07415
G01 X-68.95680 Y51.04888
G01 X-68.94154 Y50.99717
G01 X-68.92942 Y50.95010
G01 X-68.92726 Y50.92983
G01 X-68.92282 Y50.88276
G01 X-68.92249 Y50.87613
G01 X-68.92167 Y50.84172
G01 X-68.92167 Y49.59171
G01 X-68.92249 Y49.55732
G01 X-68.92282 Y49.55056
G01 X-68.92726 Y49.50362
G01 X-68.92942 Y49.48332
G01 X-68.94154 Y49.43628
G01 X-68.95289 Y49.39780
G01 X-68.96668 Y49.38757
G01 X-69.02932 Y49.34558
G01 X-69.08322 Y49.31327
G01 X-69.10191 Y49.30250
G01 X-69.13191 Y49.28597
G01 X-69.18002 Y49.25574
G01 X-69.21547 Y49.23039
G01 X-69.24280 Y49.20916
G01 X-69.27986 Y49.04675
G01 X-69.27986 Y47.24670
G01 X-69.10191 Y46.89082
G01 X-68.96780 Y46.75671
G01 X-68.96782 Y45.36248
G01 X-68.96831 Y45.36045
G01 X-68.96945 Y45.35542
G01 X-68.97928 Y45.31325
G01 X-68.98581 Y45.28300
G01 X-68.99322 Y45.24569
G01 X-69.01568 Y45.15603
G01 X-69.02340 Y45.13053
G01 X-69.03465 Y45.09009
G01 X-69.04720 Y45.04102
G01 X-69.05891 Y44.99908
G01 X-69.05992 Y44.99575
G01 X-69.05992 Y44.62273
G01 X-69.04347 Y44.54000
G01 X-69.01319 Y44.44033
G01 X-69.00072 Y44.43058
G01 X-68.96363 Y44.40035
G01 X-68.89117 Y44.33863
G01 X-68.79231 Y44.23881
G01 X-68.77801 Y44.22161
G01 X-68.77783 Y44.22138
G01 X-68.72975 Y44.16845
G01 X-68.70966 Y44.14531
G01 X-68.62685 Y44.05004
G01 X-68.57910 Y44.00030
G01 X-68.56963 Y43.99136
G01 X-68.45726 Y43.90155
G01 X-68.42005 Y43.87379
G01 X-68.40029 Y43.86271
G01 X-68.26219 Y43.78844
G01 X-68.25261 Y43.78339
G01 X-68.19795 Y43.76319
G01 X-68.07245 Y43.72263
G01 X-68.04812 Y43.71694
G01 X-67.98040 Y43.70457
G01 X-67.88495 Y43.69190
G01 X-67.82439 Y43.68892
G01 X-67.75548 Y43.68892
G01 X-67.69488 Y43.69190
G01 X-67.59942 Y43.70457
G01 X-67.53171 Y43.71694
G01 X-67.50740 Y43.72263
G01 X-67.38187 Y43.76319
G01 X-67.32721 Y43.78341
G01 X-67.31766 Y43.78844
G01 X-67.17954 Y43.86271
G01 X-67.15975 Y43.87379
G01 X-67.12256 Y43.90155
G01 X-67.01020 Y43.99136
G01 X-67.00072 Y44.00030
G01 X-66.95299 Y44.05004
G01 X-66.87362 Y44.14135
G01 X-66.85030 Y44.16865
G01 X-66.80265 Y44.22171
G01 X-66.79767 Y44.22720
G01 X-66.75503 Y44.27379
G01 X-66.68853 Y44.33855
G01 X-66.61731 Y44.40068
G01 X-66.56666 Y44.44028
G01 X-66.52137 Y44.44275
G01 X-66.47321 Y44.44033
G01 X-66.46069 Y44.43058
G01 X-66.42366 Y44.40035
G01 X-66.35117 Y44.33863
G01 X-66.25231 Y44.23881
G01 X-66.23804 Y44.22161
G01 X-66.23781 Y44.22138
G01 X-66.18978 Y44.16845
G01 X-66.16991 Y44.14562
G01 X-66.08685 Y44.05004
G01 X-66.03910 Y44.00030
G01 X-66.02963 Y43.99134
G01 X-65.91728 Y43.90155
G01 X-65.88010 Y43.87379
G01 X-65.86029 Y43.86271
G01 X-65.72219 Y43.78844
G01 X-65.71264 Y43.78341
G01 X-65.65798 Y43.76319
G01 X-65.53245 Y43.72263
G01 X-65.50812 Y43.71694
G01 X-65.44042 Y43.70457
G01 X-65.34495 Y43.69190
G01 X-65.28439 Y43.68892
G01 X-65.21548 Y43.68892
G01 X-65.15490 Y43.69190
G01 X-65.05942 Y43.70457
G01 X-64.99173 Y43.71694
G01 X-64.96740 Y43.72263
G01 X-64.84187 Y43.76319
G01 X-64.78721 Y43.78341
G01 X-64.77766 Y43.78844
G01 X-64.63956 Y43.86271
G01 X-64.61978 Y43.87379
G01 X-64.58256 Y43.90155
G01 X-64.47533 Y43.98727
G01 X-64.45988 Y43.99926
G01 X-64.41373 Y44.03411
G01 X-64.40332 Y44.04211
G01 X-64.37947 Y44.06081
G01 X-64.26796 Y44.13388
G01 X-64.18409 Y44.17973
G01 X-64.12702 Y44.21077
G01 X-64.11787 Y44.20998
G01 X-64.01719 Y44.19070
G01 X-64.00855 Y44.18707
G01 X-63.99994 Y44.17386
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.99994 Y44.52837 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.99994 Y44.52837
G01 X-64.04193 Y44.38991
G01 X-64.07868 Y44.30119
G01 X-64.12702 Y44.21077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.69231 Y37.76547 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.69231 Y37.76547
G01 X-69.20234 Y37.76547
G01 X-69.10674 Y37.77489
G01 X-69.01479 Y37.80275
G01 X-68.93003 Y37.84812
G01 X-68.85584 Y37.90898
G01 X-68.79493 Y37.98322
G01 X-68.74961 Y38.06796
G01 X-68.72175 Y38.15988
G01 X-68.71629 Y38.21548
G01 X-67.68924 Y38.21548
G01 X-67.65922 Y38.17893
G01 X-67.59132 Y38.11101
G01 X-67.47006 Y38.01152
G01 X-67.39023 Y37.95815
G01 X-67.25193 Y37.88421
G01 X-67.16318 Y37.84746
G01 X-67.01309 Y37.80194
G01 X-66.91888 Y37.78320
G01 X-66.76282 Y37.76783
G01 X-66.66676 Y37.76783
G01 X-66.51068 Y37.78320
G01 X-66.41647 Y37.80194
G01 X-66.26638 Y37.84746
G01 X-66.17766 Y37.88421
G01 X-66.04576 Y37.95472
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.00110 Y37.80103 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.00110 Y37.80103
G01 X-66.13603 Y37.78774
G01 X-66.23021 Y37.76900
G01 X-66.38030 Y37.72346
G01 X-66.46907 Y37.68670
G01 X-66.60738 Y37.61279
G01 X-66.68723 Y37.55942
G01 X-66.80847 Y37.45993
G01 X-66.87639 Y37.39201
G01 X-66.90639 Y37.35546
G01 X-69.02787 Y37.35546
G01 X-69.05787 Y37.39201
G01 X-69.12579 Y37.45993
G01 X-69.24702 Y37.55942
G01 X-69.32690 Y37.61279
G01 X-69.46521 Y37.68670
G01 X-69.55395 Y37.72346
G01 X-69.69231 Y37.76547
G01 X-69.70455 Y37.76727
G01 X-69.79932 Y37.77664
G01 X-69.95616 Y37.78434
G01 X-70.04849 Y37.78434
G01 X-70.20531 Y37.77664
G01 X-70.30005 Y37.76727
G01 X-70.31225 Y37.76547
G01 X-70.66584 Y37.76547
G01 X-70.80234 Y37.85546
G01 X-70.85009 Y37.87933
G01 X-70.89650 Y37.90451
G01 X-70.97608 Y37.95132
G01 X-71.01910 Y37.97875
G01 X-71.06950 Y38.02813
G01 X-71.14793 Y38.11312
G01 X-71.19088 Y38.16359
G01 X-71.25832 Y38.24944
G01 X-71.33660 Y38.25594
G01 X-71.43604 Y38.21263
G01 X-71.49337 Y38.18345
G01 X-71.64107 Y38.08538
G01 X-71.66469 Y38.06519
G01 X-71.70523 Y38.02772
G01 X-72.62189 Y37.11106
G01 X-72.69421 Y37.02630
G01 X-72.73403 Y36.97144
G01 X-72.75232 Y36.83649
G01 X-72.75293 Y36.82097
G01 X-72.75347 Y36.79341
G01 X-72.75347 Y26.60151
G01 X-72.75430 Y26.56706
G01 X-72.75601 Y26.53285
G01 X-72.76106 Y26.49881
G01 X-72.77447 Y26.43135
G01 X-72.78280 Y26.39803
G01 X-72.79439 Y26.36569
G01 X-72.82072 Y26.30209
G01 X-72.83541 Y26.27105
G01 X-72.85306 Y26.24159
G01 X-72.89134 Y26.18431
G01 X-72.91178 Y26.15675
G01 X-72.93487 Y26.13130
G01 X-72.95857 Y26.10638
G01 X-73.03175 Y26.03321
G01 X-74.91478 Y24.15018
G01 X-74.93967 Y24.12648
G01 X-74.96515 Y24.10339
G01 X-74.99270 Y24.08294
G01 X-75.00825 Y24.07174
G01 X-75.04998 Y24.04467
G01 X-75.07942 Y24.02704
G01 X-75.09687 Y24.01878
G01 X-75.11048 Y24.01233
G01 X-75.17409 Y23.98599
G01 X-75.18201 Y23.98317
G01 X-75.20650 Y23.97441
G01 X-75.23972 Y23.96608
G01 X-75.30721 Y23.95267
G01 X-75.34119 Y23.94761
G01 X-75.37551 Y23.94594
G01 X-75.40995 Y23.94507
G01 X-76.58765 Y23.94507
G01 X-76.69854 Y23.93631
G01 X-76.75971 Y23.92663
G01 X-77.01239 Y23.84225
G01 X-77.01795 Y23.83943
G01 X-77.03768 Y23.85125
G01 X-77.12006 Y23.89542
G01 X-77.16908 Y23.91861
G01 X-77.23999 Y23.94807
G01 X-77.28899 Y23.96562
G01 X-77.35188 Y23.98472
G01 X-77.40090 Y23.99699
G01 X-77.45803 Y24.00840
G01 X-77.50702 Y24.01568
G01 X-77.56148 Y24.02107
G01 X-77.61050 Y24.02346
G01 X-77.63715 Y24.02412
G01 X-78.23712 Y24.02412
G01 X-78.26377 Y24.02346
G01 X-78.31276 Y24.02107
G01 X-78.36722 Y24.01568
G01 X-78.41622 Y24.00840
G01 X-78.47334 Y23.99699
G01 X-78.52236 Y23.98472
G01 X-78.58525 Y23.96562
G01 X-78.63425 Y23.94807
G01 X-78.70517 Y23.91861
G01 X-78.75419 Y23.89542
G01 X-78.83656 Y23.85125
G01 X-78.88556 Y23.82188
G01 X-78.91027 Y23.80535
G01 X-78.93702 Y23.74078
G01 X-78.95124 Y23.69387
G01 X-78.96996 Y23.59966
G01 X-78.97479 Y23.55089
G01 X-78.97713 Y23.50286
G01 X-78.97713 Y22.90286
G01 X-78.97479 Y22.85483
G01 X-78.96996 Y22.80606
G01 X-78.95124 Y22.71185
G01 X-78.93702 Y22.66496
G01 X-78.90024 Y22.57622
G01 X-78.87715 Y22.53299
G01 X-78.82379 Y22.45313
G01 X-78.79270 Y22.41523
G01 X-78.77713 Y22.39969
G01 X-78.77713 Y18.23287
G01 X-78.79326 Y18.20876
G01 X-78.86719 Y18.07043
G01 X-78.90395 Y17.98171
G01 X-78.94947 Y17.83162
G01 X-78.96821 Y17.73741
G01 X-78.98358 Y17.58133
G01 X-78.98358 Y17.48529
G01 X-78.96821 Y17.32921
G01 X-78.94947 Y17.23500
G01 X-78.90395 Y17.08491
G01 X-78.86719 Y16.99619
G01 X-78.79326 Y16.85786
G01 X-78.73989 Y16.77801
G01 X-78.64040 Y16.65677
G01 X-78.57248 Y16.58885
G01 X-78.54378 Y16.56531
G01 X-78.42404 Y16.52248
G01 X-78.33895 Y16.49660
G01 X-78.18213 Y16.45733
G01 X-78.10870 Y16.44267
G01 X-77.95185 Y16.41943
G01 X-77.88513 Y16.41283
G01 X-77.72831 Y16.40511
G01 X-77.66357 Y16.40511
G01 X-77.50672 Y16.41283
G01 X-77.43999 Y16.41943
G01 X-77.28315 Y16.44267
G01 X-77.20972 Y16.45733
G01 X-77.05290 Y16.49660
G01 X-76.96781 Y16.52248
G01 X-76.84807 Y16.56531
G01 X-76.39384 Y16.56531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.84807 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.84807 Y16.56531
G01 X-76.81940 Y16.58885
G01 X-76.75148 Y16.65677
G01 X-76.65198 Y16.77801
G01 X-76.59862 Y16.85786
G01 X-76.52468 Y16.99619
G01 X-76.48793 Y17.08491
G01 X-76.44594 Y17.22337
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.57342 Y18.16162 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.57342 Y18.16162
G01 X-76.57152 Y18.16068
G01 X-76.51104 Y18.17142
G01 X-76.45224 Y18.18839
G01 X-76.44645 Y18.19065
G01 X-76.44594 Y18.19144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.44594 Y17.84323 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.44594 Y17.84323
G01 X-76.48793 Y17.98171
G01 X-76.52468 Y18.07043
G01 X-76.57342 Y18.16162
G01 X-76.63232 Y18.19070
G01 X-76.71386 Y18.23782
G01 X-76.77837 Y18.27907
G01 X-76.83017 Y18.31570
G01 X-76.84922 Y18.32962
G01 X-76.90588 Y18.37239
G01 X-76.92130 Y18.38438
G01 X-77.00802 Y18.45367
G01 X-77.02856 Y18.47010
G01 X-77.06481 Y18.49720
G01 X-77.08447 Y18.51097
G01 X-77.10553 Y18.52626
G01 X-77.12793 Y18.54315
G01 X-77.20311 Y18.60808
G01 X-77.21840 Y18.68118
G01 X-77.22808 Y18.74237
G01 X-77.23687 Y18.85324
G01 X-77.23687 Y22.28396
G01 X-77.23679 Y22.29364
G01 X-77.23672 Y22.29915
G01 X-77.22453 Y22.42056
G01 X-77.21934 Y22.44828
G01 X-77.20024 Y22.47678
G01 X-77.18523 Y22.50037
G01 X-77.15737 Y22.54094
G01 X-77.13690 Y22.56865
G01 X-77.13469 Y22.57167
G01 X-77.11975 Y22.59849
G01 X-77.09684 Y22.64185
G01 X-77.07827 Y22.67964
G01 X-77.07020 Y22.70530
G01 X-77.05633 Y22.75229
G01 X-77.04431 Y22.79887
G01 X-77.04205 Y22.81968
G01 X-77.03928 Y22.84939
G01 X-77.03796 Y22.86339
G01 X-77.03771 Y22.86847
G01 X-77.03687 Y22.90286
G01 X-77.03687 Y23.49582
G01 X-77.03685 Y23.50286
G01 X-77.03649 Y23.53738
G01 X-77.03621 Y23.55102
G01 X-77.03532 Y23.58221
G01 X-77.03517 Y23.58675
G01 X-77.03253 Y23.66059
G01 X-77.02900 Y23.71292
G01 X-77.02288 Y23.77423
G01 X-77.02031 Y23.80497
G01 X-77.01795 Y23.83943
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.91027 Y23.80535 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.91027 Y23.80535
G01 X-82.48014 Y23.80535
G01 X-82.55632 Y23.85640
G01 X-82.60531 Y23.88576
G01 X-82.68128 Y23.92651
G01 X-82.73031 Y23.94970
G01 X-82.79538 Y23.97672
G01 X-82.84438 Y23.99427
G01 X-82.90181 Y24.01172
G01 X-82.95083 Y24.02399
G01 X-83.00277 Y24.03435
G01 X-83.05177 Y24.04164
G01 X-83.10117 Y24.04652
G01 X-83.15022 Y24.04893
G01 X-83.17435 Y24.04952
G01 X-83.77435 Y24.04952
G01 X-83.79848 Y24.04893
G01 X-83.84747 Y24.04652
G01 X-83.89688 Y24.04164
G01 X-83.94587 Y24.03435
G01 X-83.99782 Y24.02399
G01 X-84.04684 Y24.01172
G01 X-84.10427 Y23.99427
G01 X-84.15326 Y23.97672
G01 X-84.21834 Y23.94970
G01 X-84.26736 Y23.92651
G01 X-84.34333 Y23.88576
G01 X-84.39233 Y23.85640
G01 X-84.46850 Y23.80535
G01 X-84.47422 Y23.79158
G01 X-84.48844 Y23.74467
G01 X-84.50716 Y23.65046
G01 X-84.51199 Y23.60169
G01 X-84.51433 Y23.55366
G01 X-84.51433 Y22.95366
G01 X-84.51199 Y22.90563
G01 X-84.50716 Y22.85686
G01 X-84.48844 Y22.76265
G01 X-84.47422 Y22.71576
G01 X-84.43744 Y22.62702
G01 X-84.41435 Y22.58379
G01 X-84.36099 Y22.50393
G01 X-84.32990 Y22.46603
G01 X-84.31433 Y22.45049
G01 X-84.31433 Y18.47851
G01 X-84.39667 Y18.41092
G01 X-84.46459 Y18.34300
G01 X-84.56408 Y18.22177
G01 X-84.61745 Y18.14191
G01 X-84.69139 Y18.00361
G01 X-84.72814 Y17.91486
G01 X-84.77366 Y17.76477
G01 X-84.79241 Y17.67056
G01 X-84.80777 Y17.51448
G01 X-84.80777 Y17.41844
G01 X-84.79241 Y17.26236
G01 X-84.77366 Y17.16815
G01 X-84.72814 Y17.01809
G01 X-84.69139 Y16.92934
G01 X-84.61745 Y16.79101
G01 X-84.56408 Y16.71115
G01 X-84.46459 Y16.58992
G01 X-84.43995 Y16.56531
G01 X-84.38118 Y16.54090
G01 X-84.22433 Y16.48479
G01 X-84.14646 Y16.46109
G01 X-83.98964 Y16.42182
G01 X-83.92296 Y16.40851
G01 X-83.76614 Y16.38527
G01 X-83.70597 Y16.37933
G01 X-83.54918 Y16.37163
G01 X-83.49111 Y16.37163
G01 X-83.33427 Y16.37933
G01 X-83.27409 Y16.38527
G01 X-83.11728 Y16.40851
G01 X-83.05065 Y16.42180
G01 X-82.89381 Y16.46109
G01 X-82.81585 Y16.48481
G01 X-82.65906 Y16.54092
G01 X-82.60026 Y16.56533
G01 X-82.57567 Y16.58992
G01 X-82.47618 Y16.71115
G01 X-82.42281 Y16.79101
G01 X-82.34890 Y16.92934
G01 X-82.31212 Y17.01809
G01 X-82.27013 Y17.15647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.27011 Y17.77635 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.27011 Y17.77635
G01 X-82.31212 Y17.91486
G01 X-82.34890 Y18.00361
G01 X-82.42281 Y18.14191
G01 X-82.47618 Y18.22177
G01 X-82.57567 Y18.34300
G01 X-82.63434 Y18.40165
G01 X-82.63434 Y22.45049
G01 X-82.61877 Y22.46603
G01 X-82.58769 Y22.50393
G01 X-82.53432 Y22.58379
G01 X-82.51123 Y22.62702
G01 X-82.47448 Y22.71576
G01 X-82.46023 Y22.76265
G01 X-82.44151 Y22.85686
G01 X-82.43671 Y22.90563
G01 X-82.43435 Y22.95366
G01 X-82.43435 Y23.55366
G01 X-82.43671 Y23.60169
G01 X-82.44151 Y23.65046
G01 X-82.46023 Y23.74467
G01 X-82.47448 Y23.79158
G01 X-82.48014 Y23.80535
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.70593 Y27.57979 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.70593 Y27.57979
G01 X-79.69249 Y27.59843
G01 X-79.69249 Y27.67448
G01 X-79.69597 Y27.71009
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.42592 Y27.47773 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.42592 Y27.47773
G01 X-76.40947 Y27.39503
G01 X-76.36395 Y27.24494
G01 X-76.32719 Y27.15619
G01 X-76.28396 Y27.07532
G01 X-76.21305 Y27.03940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.03146 Y26.41319 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.03146 Y26.41319
G01 X-75.02577 Y26.41019
G01 X-74.99872 Y26.35711
G01 X-74.97485 Y26.26836
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.77980 Y26.46341 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.77980 Y26.46341
G01 X-74.97485 Y26.26836
G01 X-74.97785 Y26.25726
G01 X-74.99908 Y26.19193
G01 X-75.11798 Y25.95376
G01 X-75.15438 Y25.90362
G01 X-75.22669 Y25.81886
G01 X-75.56840 Y25.47715
G01 X-75.58861 Y25.45777
G01 X-75.60002 Y25.44720
G01 X-75.70802 Y25.36503
G01 X-75.71399 Y25.36407
G01 X-75.77518 Y25.35439
G01 X-75.88607 Y25.34563
G01 X-77.15541 Y25.34563
G01 X-77.16037 Y25.34324
G01 X-77.20936 Y25.32010
G01 X-77.27040 Y25.29473
G01 X-77.31939 Y25.27720
G01 X-77.37304 Y25.26089
G01 X-77.42206 Y25.24860
G01 X-77.47075 Y25.23887
G01 X-77.51975 Y25.23161
G01 X-77.56565 Y25.22706
G01 X-77.61470 Y25.22467
G01 X-77.63715 Y25.22412
G01 X-78.23712 Y25.22412
G01 X-78.25960 Y25.22467
G01 X-78.30860 Y25.22706
G01 X-78.35450 Y25.23161
G01 X-78.40349 Y25.23887
G01 X-78.45218 Y25.24860
G01 X-78.50121 Y25.26089
G01 X-78.55485 Y25.27720
G01 X-78.60385 Y25.29473
G01 X-78.66488 Y25.32010
G01 X-78.71388 Y25.34324
G01 X-78.71883 Y25.34563
G01 X-81.87547 Y25.34563
G01 X-81.90239 Y25.34611
G01 X-81.91794 Y25.34675
G01 X-81.95916 Y25.34951
G01 X-82.72604 Y25.34951
G01 X-82.78941 Y25.32338
G01 X-82.83841 Y25.30583
G01 X-82.89751 Y25.28787
G01 X-82.94654 Y25.27558
G01 X-83.00044 Y25.26483
G01 X-83.04943 Y25.25757
G01 X-83.10036 Y25.25254
G01 X-83.14938 Y25.25012
G01 X-83.17435 Y25.24952
G01 X-83.77435 Y25.24952
G01 X-83.79929 Y25.25012
G01 X-83.84829 Y25.25254
G01 X-83.89921 Y25.25757
G01 X-83.94821 Y25.26483
G01 X-84.00211 Y25.27558
G01 X-84.05113 Y25.28787
G01 X-84.08921 Y25.29871
G01 X-88.59202 Y25.29871
G01 X-88.61259 Y25.28899
G01 X-88.66778 Y25.26608
G01 X-88.71678 Y25.24852
G01 X-88.76497 Y25.23387
G01 X-88.81399 Y25.22160
G01 X-88.85750 Y25.21294
G01 X-88.90649 Y25.20567
G01 X-88.94734 Y25.20164
G01 X-88.99638 Y25.19922
G01 X-89.01635 Y25.19874
G01 X-89.61635 Y25.19874
G01 X-89.63631 Y25.19922
G01 X-89.68531 Y25.20164
G01 X-89.72615 Y25.20567
G01 X-89.77515 Y25.21294
G01 X-89.81866 Y25.22160
G01 X-89.86768 Y25.23387
G01 X-89.91416 Y25.24792
G01 X-94.40722 Y25.24792
G01 X-94.45185 Y25.22683
G01 X-94.49533 Y25.20875
G01 X-94.54433 Y25.19122
G01 X-94.58162 Y25.17989
G01 X-94.63064 Y25.16760
G01 X-94.66376 Y25.16100
G01 X-94.71276 Y25.15373
G01 X-94.74354 Y25.15068
G01 X-94.79256 Y25.14827
G01 X-94.80755 Y25.14792
G01 X-95.40752 Y25.14792
G01 X-95.42251 Y25.14827
G01 X-95.47153 Y25.15068
G01 X-95.50229 Y25.15373
G01 X-95.55129 Y25.16100
G01 X-95.58441 Y25.16760
G01 X-95.63343 Y25.17989
G01 X-95.67072 Y25.19122
G01 X-95.71971 Y25.20875
G01 X-95.72995 Y25.21256
G01 X-95.75220 Y25.22112
G01 X-95.76427 Y25.22594
G01 X-95.80938 Y25.24464
G01 X-95.82340 Y25.24395
G01 X-95.87412 Y25.23895
G01 X-95.94275 Y25.22876
G01 X-95.99706 Y25.21794
G01 X-96.06566 Y25.20075
G01 X-96.12627 Y25.18231
G01 X-96.19487 Y25.15774
G01 X-96.22911 Y25.14454
G01 X-96.27856 Y25.12406
G01 X-96.30221 Y25.08955
G01 X-96.33861 Y25.03943
G01 X-96.41092 Y24.95465
G01 X-97.03046 Y24.33509
G01 X-97.06251 Y24.30499
G01 X-97.08098 Y24.28871
G01 X-97.11958 Y24.25698
G01 X-97.14818 Y24.23512
G01 X-97.20681 Y24.19448
G01 X-97.21222 Y24.19107
G01 X-97.26655 Y24.15391
G01 X-97.27640 Y24.14662
G01 X-97.34044 Y24.10306
G01 X-97.39647 Y24.06801
G01 X-97.41120 Y24.03247
G01 X-97.43111 Y23.96684
G01 X-97.44862 Y23.87875
G01 X-97.44702 Y23.87240
G01 X-97.43292 Y23.82592
G01 X-97.42581 Y23.80133
G01 X-97.41341 Y23.75630
G01 X-97.40798 Y23.73562
G01 X-97.34905 Y23.50037
G01 X-97.33447 Y23.42729
G01 X-97.29957 Y23.19206
G01 X-97.29324 Y23.12788
G01 X-97.28169 Y22.89265
G01 X-97.28169 Y22.83131
G01 X-97.29324 Y22.59608
G01 X-97.29957 Y22.53189
G01 X-97.33447 Y22.29666
G01 X-97.34905 Y22.22356
G01 X-97.35911 Y22.18333
G01 X-97.47656 Y22.02499
G01 X-97.52123 Y21.97050
G01 X-97.67940 Y21.79598
G01 X-97.72695 Y21.74846
G01 X-97.90147 Y21.59029
G01 X-97.95593 Y21.54561
G01 X-98.14696 Y21.40393
G01 X-98.21415 Y21.35910
G01 X-98.23203 Y21.34835
G01 X-98.44701 Y21.31648
G01 X-98.52177 Y21.30909
G01 X-98.75702 Y21.29753
G01 X-98.82883 Y21.29753
G01 X-99.06408 Y21.30909
G01 X-99.13881 Y21.31648
G01 X-99.37406 Y21.35135
G01 X-99.45809 Y21.36812
G01 X-99.67043 Y21.42130
G01 X-99.69060 Y21.43205
G01 X-99.77048 Y21.48541
G01 X-99.95232 Y21.63466
G01 X-100.02024 Y21.70258
G01 X-100.16946 Y21.88442
G01 X-100.22285 Y21.96430
G01 X-100.33373 Y22.17175
G01 X-100.37050 Y22.26049
G01 X-100.43878 Y22.48561
G01 X-100.45752 Y22.57982
G01 X-100.48059 Y22.81393
G01 X-100.48059 Y22.91000
G01 X-100.45752 Y23.14411
G01 X-100.43878 Y23.23832
G01 X-100.37050 Y23.46341
G01 X-100.33373 Y23.55216
G01 X-100.22285 Y23.75963
G01 X-100.16946 Y23.83951
G01 X-100.02024 Y24.02135
G01 X-99.95232 Y24.08927
G01 X-99.77048 Y24.23849
G01 X-99.69060 Y24.29186
G01 X-99.63294 Y24.32269
G01 X-99.63294 Y24.35437
G01 X-99.64975 Y24.34606
G01 X-99.83614 Y24.22153
G01 X-100.00469 Y24.07372
G01 X-100.15247 Y23.90522
G01 X-100.27698 Y23.71884
G01 X-100.30965 Y23.65259
G01 X-100.32986 Y23.61566
G01 X-100.33858 Y23.60126
G01 X-100.39702 Y23.52336
G01 X-100.46974 Y23.45854
G01 X-100.51922 Y23.42257
G01 X-100.60794 Y23.37131
G01 X-100.70540 Y23.33964
G01 X-100.80733 Y23.32892
G01 X-100.86852 Y23.32892
G01 X-100.97038 Y23.33964
G01 X-101.06781 Y23.37129
G01 X-101.15651 Y23.42249
G01 X-101.20601 Y23.45846
G01 X-101.25186 Y23.49973
G01 X-101.26535 Y23.54010
G01 X-101.32615 Y23.72216
G01 X-101.33586 Y23.78335
G01 X-101.34612 Y23.91309
G01 X-101.34612 Y27.08296
G01 X-101.34302 Y27.15429
G01 X-101.34005 Y27.18850
G01 X-101.29458 Y27.39973
G01 X-101.27358 Y27.46092
G01 X-101.26535 Y27.47920
G01 X-101.26535 Y27.67560
G01 X-101.08457 Y27.85634
G01 X-100.90667 Y27.67847
G01 X-100.90035 Y27.66660
G01 X-100.82410 Y27.62444
G01 X-100.74630 Y27.57654
G01 X-100.70230 Y27.54750
G01 X-100.65049 Y27.51090
G01 X-100.61330 Y27.48284
G01 X-100.55839 Y27.43866
G01 X-100.43588 Y27.34075
G01 X-100.39870 Y27.31299
G01 X-100.37889 Y27.30191
G01 X-100.24079 Y27.22767
G01 X-100.23124 Y27.22261
G01 X-100.17658 Y27.20239
G01 X-100.05107 Y27.16183
G01 X-100.02672 Y27.15617
G01 X-99.95902 Y27.14377
G01 X-99.86355 Y27.13115
G01 X-99.80299 Y27.12812
G01 X-99.73408 Y27.12812
G01 X-99.67350 Y27.13115
G01 X-99.57802 Y27.14377
G01 X-99.51033 Y27.15617
G01 X-99.48597 Y27.16183
G01 X-99.36047 Y27.20239
G01 X-99.30574 Y27.22266
G01 X-99.29626 Y27.22767
G01 X-99.15816 Y27.30191
G01 X-99.13835 Y27.31299
G01 X-99.10116 Y27.34075
G01 X-98.98882 Y27.43054
G01 X-98.97935 Y27.43950
G01 X-98.93159 Y27.48924
G01 X-98.86063 Y27.57090
G01 X-98.83177 Y27.61022
G01 X-98.79382 Y27.66765
G01 X-98.75687 Y27.73010
G01 X-98.71999 Y27.80600
G01 X-98.69299 Y27.86937
G01 X-98.68021 Y27.90392
G01 X-98.64742 Y28.02177
G01 X-98.63284 Y28.08682
G01 X-98.63266 Y28.08797
G01 X-98.61859 Y28.24303
G01 X-98.61630 Y28.27755
G01 X-98.61856 Y28.31202
G01 X-98.63266 Y28.46706
G01 X-98.63284 Y28.46820
G01 X-98.64803 Y28.53546
G01 X-98.68019 Y28.65113
G01 X-98.69299 Y28.68573
G01 X-98.71999 Y28.74905
G01 X-98.75687 Y28.82502
G01 X-98.79382 Y28.88740
G01 X-98.82804 Y28.93970
G01 X-98.83177 Y28.94486
G01 X-98.86058 Y28.98415
G01 X-98.93159 Y29.06581
G01 X-98.93977 Y29.07503
G01 X-98.97935 Y29.11555
G01 X-98.98882 Y29.12451
G01 X-99.10116 Y29.21430
G01 X-99.13855 Y29.24222
G01 X-99.15791 Y29.25355
G01 X-99.17914 Y29.26650
G01 X-99.18082 Y29.26757
G01 X-99.20096 Y29.28499
G01 X-99.23832 Y29.31971
G01 X-101.15559 Y31.23698
G01 X-101.17472 Y31.25687
G01 X-101.18526 Y31.26830
G01 X-101.27088 Y31.38171
G01 X-101.30375 Y31.43535
G01 X-101.36425 Y31.55463
G01 X-101.42692 Y31.70594
G01 X-101.42694 Y32.34628
G01 X-101.36428 Y32.49761
G01 X-101.35006 Y32.53009
G01 X-101.34312 Y32.54516
G01 X-101.26420 Y32.68054
G01 X-101.22781 Y32.73065
G01 X-101.15559 Y32.81526
G01 X-99.31252 Y34.65834
G01 X-99.25219 Y34.71208
G01 X-99.21668 Y34.74028
G01 X-99.05209 Y34.83977
G01 X-99.03137 Y34.83078
G01 X-98.96990 Y34.80695
G01 X-98.86113 Y34.76982
G01 X-98.79708 Y34.75130
G01 X-98.77958 Y34.74924
G01 X-98.73891 Y34.74807
G01 X-97.03891 Y34.74807
G01 X-96.99827 Y34.74924
G01 X-96.98077 Y34.75130
G01 X-96.89467 Y34.77777
G01 X-96.87176 Y34.79034
G01 X-96.82212 Y34.82161
G01 X-96.76218 Y34.88155
G01 X-96.73742 Y34.92006
G01 X-96.71837 Y34.95404
G01 X-96.69190 Y35.04017
G01 X-96.68984 Y35.05767
G01 X-96.68867 Y35.09834
G01 X-96.68867 Y36.79834
G01 X-96.68984 Y36.83898
G01 X-96.69190 Y36.85648
G01 X-96.71837 Y36.94261
G01 X-96.76221 Y37.01510
G01 X-96.82215 Y37.07504
G01 X-96.89464 Y37.11888
G01 X-96.98077 Y37.14535
G01 X-96.99827 Y37.14741
G01 X-97.03891 Y37.14858
G01 X-98.73891 Y37.14858
G01 X-98.77958 Y37.14741
G01 X-98.79708 Y37.14535
G01 X-98.88318 Y37.11888
G01 X-98.91836 Y37.09912
G01 X-98.95572 Y37.07504
G01 X-99.01564 Y37.01510
G01 X-99.05948 Y36.94261
G01 X-99.08778 Y36.84865
G01 X-99.09763 Y36.80509
G01 X-99.09913 Y36.79831
G01 X-99.10297 Y36.78066
G01 X-99.13167 Y36.68106
G01 X-99.18953 Y36.64909
G01 X-99.19215 Y36.64766
G01 X-99.24699 Y36.61764
G01 X-99.25102 Y36.61546
G01 X-99.31272 Y36.58221
G01 X-99.34330 Y36.56664
G01 X-99.37277 Y36.54901
G01 X-99.43004 Y36.51073
G01 X-99.45758 Y36.49029
G01 X-99.48308 Y36.46720
G01 X-99.50797 Y36.44347
G01 X-100.52026 Y35.43121
G01 X-100.58229 Y35.37611
G01 X-100.61881 Y35.34729
G01 X-100.80733 Y35.23807
G01 X-100.86852 Y35.21272
G01 X-100.95597 Y35.19311
G01 X-100.99677 Y35.18399
G01 X-101.06781 Y35.20708
G01 X-101.15651 Y35.25828
G01 X-101.20601 Y35.29425
G01 X-101.28214 Y35.36278
G01 X-101.34233 Y35.44561
G01 X-101.38399 Y35.53916
G01 X-101.40291 Y35.59735
G01 X-101.42090 Y35.67215
G01 X-101.42694 Y35.74886
G01 X-101.42694 Y39.01431
G01 X-102.36194 Y39.01431
G01 X-102.36781 Y39.01477
G01 X-102.43870 Y39.02035
G01 X-102.46928 Y39.02521
G01 X-102.58008 Y39.05650
G01 X-102.68051 Y39.11273
G01 X-102.73001 Y39.14870
G01 X-102.80614 Y39.21723
G01 X-102.86633 Y39.30006
G01 X-102.90799 Y39.39361
G01 X-102.92691 Y39.45180
G01 X-102.94490 Y39.52660
G01 X-102.95094 Y39.60331
G01 X-102.95094 Y39.72071
G01 X-102.89270 Y39.85850
G01 X-102.87202 Y39.93564
G01 X-102.84609 Y40.09117
G01 X-102.84355 Y40.13005
G01 X-102.84192 Y40.17979
G01 X-102.84192 Y44.25667
G01 X-102.83659 Y44.34689
G01 X-102.83113 Y44.39311
G01 X-102.77019 Y44.62187
G01 X-102.74482 Y44.68306
G01 X-102.73293 Y44.70571
G01 X-102.73291 Y44.70571
G01 X-102.73093 Y44.70955
G01 X-102.67367 Y44.75588
G01 X-102.58244 Y44.80236
G01 X-102.49410 Y44.82603
G01 X-102.49341 Y44.82585
G01 X-102.48267 Y44.82321
G01 X-102.41736 Y44.80200
G01 X-102.17896 Y44.68298
G01 X-102.12887 Y44.64656
G01 X-102.04426 Y44.57437
G01 X-98.51923 Y41.04931
G01 X-98.51021 Y41.04016
G01 X-98.50510 Y41.03485
G01 X-98.42621 Y40.93696
G01 X-98.40998 Y40.91276
G01 X-98.40851 Y40.90295
G01 X-98.40462 Y40.87968
G01 X-98.39596 Y40.83224
G01 X-98.38730 Y40.76894
G01 X-98.37899 Y40.67742
G01 X-98.37881 Y40.67633
G01 X-98.36363 Y40.60905
G01 X-98.33144 Y40.49335
G01 X-98.31867 Y40.45878
G01 X-98.29164 Y40.39541
G01 X-98.25479 Y40.31949
G01 X-98.21778 Y40.25705
G01 X-98.17986 Y40.19965
G01 X-98.15100 Y40.16033
G01 X-98.08003 Y40.07870
G01 X-98.03233 Y40.02896
G01 X-98.02283 Y40.02000
G01 X-97.91051 Y39.93021
G01 X-97.87330 Y39.90244
G01 X-97.85347 Y39.89135
G01 X-97.71534 Y39.81708
G01 X-97.70587 Y39.81207
G01 X-97.65123 Y39.79188
G01 X-97.52565 Y39.75129
G01 X-97.50140 Y39.74560
G01 X-97.43358 Y39.73320
G01 X-97.33810 Y39.72053
G01 X-97.27752 Y39.71756
G01 X-97.26927 Y39.71720
G01 X-97.24168 Y39.71619
G01 X-97.22616 Y39.71578
G01 X-97.20851 Y39.71550
G01 X-97.10422 Y39.70638
G01 X-97.08649 Y39.69389
G01 X-97.03635 Y39.65746
G01 X-96.95159 Y39.58515
G01 X-94.21662 Y36.85018
G01 X-94.19173 Y36.82645
G01 X-94.16625 Y36.80337
G01 X-94.13869 Y36.78292
G01 X-94.09272 Y36.75157
G01 X-94.08141 Y36.74467
G01 X-94.05733 Y36.73024
G01 X-94.05192 Y36.72699
G01 X-94.02091 Y36.71233
G01 X-93.95731 Y36.68599
G01 X-93.95579 Y36.68543
G01 X-93.90064 Y36.66306
G01 X-93.89356 Y36.65983
G01 X-93.87014 Y36.64964
G01 X-93.82630 Y36.63151
G01 X-93.76038 Y36.60070
G01 X-93.72150 Y36.58035
G01 X-93.68820 Y36.56212
G01 X-93.62701 Y36.52699
G01 X-93.60877 Y36.51629
G01 X-93.54720 Y36.54543
G01 X-93.46249 Y36.58061
G01 X-93.30567 Y36.63672
G01 X-93.23742 Y36.65747
G01 X-93.08060 Y36.69676
G01 X-93.02320 Y36.70819
G01 X-92.86635 Y36.73146
G01 X-92.81520 Y36.73651
G01 X-92.65838 Y36.74423
G01 X-92.60908 Y36.74423
G01 X-92.45223 Y36.73651
G01 X-92.40105 Y36.73146
G01 X-92.24423 Y36.70819
G01 X-92.18685 Y36.69676
G01 X-92.03003 Y36.65747
G01 X-92.02968 Y36.65739
G01 X-91.97898 Y36.61579
G01 X-91.86262 Y36.51033
G01 X-91.81774 Y36.46544
G01 X-91.71228 Y36.34909
G01 X-91.67050 Y36.29813
G01 X-91.57603 Y36.17080
G01 X-91.53514 Y36.10951
G01 X-91.45201 Y35.97083
G01 X-91.41078 Y35.89354
G01 X-91.36372 Y35.79405
G01 X-91.36372 Y35.47876
G01 X-91.34726 Y35.39600
G01 X-91.30232 Y35.24782
G01 X-91.30019 Y35.24635
G01 X-91.29872 Y35.24528
G01 X-91.21523 Y35.18379
G01 X-91.10898 Y35.09191
G01 X-91.09026 Y35.07276
G01 X-91.06397 Y35.04716
G01 X-91.03674 Y35.02186
G01 X-90.98376 Y34.96715
G01 X-90.93065 Y34.90604
G01 X-90.88289 Y34.85630
G01 X-90.87342 Y34.84734
G01 X-90.76108 Y34.75755
G01 X-90.72389 Y34.72979
G01 X-90.70408 Y34.71871
G01 X-90.56598 Y34.64444
G01 X-90.55643 Y34.63941
G01 X-90.50177 Y34.61919
G01 X-90.37626 Y34.57863
G01 X-90.35191 Y34.57294
G01 X-90.28422 Y34.56057
G01 X-90.21139 Y34.55089
G01 X-90.12917 Y34.53504
G01 X-90.12204 Y34.53324
G01 X-90.07238 Y34.52239
G01 X-90.05676 Y34.51955
G01 X-89.89453 Y34.47259
G01 X-89.89295 Y34.47195
G01 X-89.82072 Y34.52425
G01 X-89.76987 Y34.55828
G01 X-89.71599 Y34.59151
G01 X-89.68307 Y34.61066
G01 X-89.62148 Y34.64442
G01 X-89.61655 Y34.64708
G01 X-89.48338 Y34.71871
G01 X-89.46354 Y34.72979
G01 X-89.42638 Y34.75755
G01 X-89.38899 Y34.78742
G01 X-89.31401 Y34.84736
G01 X-89.30454 Y34.85630
G01 X-89.25681 Y34.90604
G01 X-89.17726 Y34.99755
G01 X-89.15412 Y35.02465
G01 X-89.10649 Y35.07769
G01 X-89.10154 Y35.08315
G01 X-89.05889 Y35.12971
G01 X-88.99237 Y35.19450
G01 X-88.92110 Y35.25668
G01 X-88.87045 Y35.29628
G01 X-88.82521 Y35.29875
G01 X-88.77700 Y35.29633
G01 X-88.76453 Y35.28660
G01 X-88.72737 Y35.25630
G01 X-88.65498 Y35.19461
G01 X-88.55618 Y35.09491
G01 X-88.54190 Y35.07769
G01 X-88.49357 Y35.02445
G01 X-88.47345 Y35.00129
G01 X-88.39065 Y34.90604
G01 X-88.34289 Y34.85630
G01 X-88.33342 Y34.84736
G01 X-88.22107 Y34.75755
G01 X-88.18389 Y34.72979
G01 X-88.16408 Y34.71871
G01 X-88.02598 Y34.64444
G01 X-88.01643 Y34.63941
G01 X-87.96177 Y34.61919
G01 X-87.83626 Y34.57863
G01 X-87.81191 Y34.57294
G01 X-87.77569 Y34.56547
G01 X-87.74973 Y34.56083
G01 X-87.74429 Y34.55986
G01 X-87.73517 Y34.55831
G01 X-87.59789 Y34.52062
G01 X-87.59085 Y34.51795
G01 X-87.53741 Y34.49976
G01 X-87.51412 Y34.49270
G01 X-87.47175 Y34.47873
G01 X-87.41884 Y34.29415
G01 X-87.40916 Y34.23296
G01 X-87.40038 Y34.12207
G01 X-87.40038 Y34.01013
G01 X-87.40337 Y33.94533
G01 X-87.40675 Y33.90891
G01 X-87.44856 Y33.72250
G01 X-87.47035 Y33.66128
G01 X-87.54013 Y33.53741
G01 X-87.56253 Y33.49766
G01 X-87.57513 Y33.48953
G01 X-87.67089 Y33.45316
G01 X-87.73004 Y33.43754
G01 X-87.83118 Y33.42189
G01 X-87.93337 Y33.42760
G01 X-88.03215 Y33.45440
G01 X-88.08920 Y33.47650
G01 X-88.15859 Y33.50985
G01 X-88.22189 Y33.55369
G01 X-88.28592 Y33.60591
G01 X-88.28592 Y33.57713
G01 X-88.22946 Y33.53080
G01 X-88.16852 Y33.45653
G01 X-88.12323 Y33.37183
G01 X-88.09534 Y33.27990
G01 X-88.08595 Y33.18432
G01 X-88.08595 Y31.60432
G01 X-88.13090 Y31.55936
G01 X-88.17063 Y31.51768
G01 X-88.21950 Y31.46378
G01 X-88.27271 Y31.39919
G01 X-88.28374 Y31.38430
G01 X-88.31325 Y31.34719
G01 X-88.34927 Y31.30515
G01 X-88.38856 Y31.26426
G01 X-88.42054 Y31.23470
G01 X-88.46237 Y31.20066
G01 X-88.49783 Y31.17531
G01 X-88.54594 Y31.14508
G01 X-88.57591 Y31.12855
G01 X-88.59461 Y31.11778
G01 X-88.61274 Y31.10693
G01 X-88.62171 Y31.07114
G01 X-88.63200 Y31.01948
G01 X-88.64000 Y30.96558
G01 X-88.64480 Y30.91702
G01 X-88.64744 Y30.86312
G01 X-88.64802 Y30.83932
G01 X-88.64802 Y29.58931
G01 X-88.64744 Y29.56553
G01 X-88.64480 Y29.51164
G01 X-88.64000 Y29.46307
G01 X-88.63200 Y29.40917
G01 X-88.62171 Y29.35751
G01 X-88.60820 Y29.30361
G01 X-88.59092 Y29.24679
G01 X-88.57162 Y29.19287
G01 X-88.54802 Y29.13513
G01 X-88.54802 Y28.71987
G01 X-88.54719 Y28.68624
G01 X-88.54383 Y28.61763
G01 X-88.53705 Y28.54913
G01 X-88.52839 Y28.49061
G01 X-88.52252 Y28.48187
G01 X-88.51917 Y28.47689
G01 X-88.48297 Y28.42363
G01 X-88.47990 Y28.41908
G01 X-88.44467 Y28.36632
G01 X-88.40535 Y28.31331
G01 X-88.38772 Y28.29183
G01 X-88.36278 Y28.25949
G01 X-88.34805 Y28.23910
G01 X-88.34325 Y28.23257
G01 X-88.25364 Y28.11174
G01 X-88.21272 Y28.05047
G01 X-88.12961 Y27.91182
G01 X-88.08839 Y27.83452
G01 X-88.04134 Y27.73503
G01 X-88.04134 Y27.41974
G01 X-88.05780 Y27.33696
G01 X-88.10332 Y27.18687
G01 X-88.14010 Y27.09813
G01 X-88.21401 Y26.95982
G01 X-88.26738 Y26.87994
G01 X-88.33819 Y26.79368
G01 X-88.22829 Y26.79406
G01 X-87.99065 Y26.79498
G01 X-87.95366 Y26.81997
G01 X-87.85869 Y26.85855
G01 X-87.80937 Y26.87278
G01 X-87.79786 Y26.86922
G01 X-87.65158 Y26.81144
G01 X-87.57840 Y26.77545
G01 X-87.53764 Y26.75388
G01 X-87.48369 Y26.72317
G01 X-87.44036 Y26.69645
G01 X-87.40360 Y26.67199
G01 X-87.38173 Y26.65972
G01 X-87.37129 Y26.65408
G01 X-87.22631 Y26.61776
G01 X-87.16558 Y26.60565
G01 X-87.00873 Y26.58241
G01 X-86.95433 Y26.57702
G01 X-86.79753 Y26.56932
G01 X-86.74516 Y26.56932
G01 X-86.58831 Y26.57702
G01 X-86.53388 Y26.58241
G01 X-86.37706 Y26.60565
G01 X-86.31638 Y26.61776
G01 X-86.17135 Y26.65408
G01 X-86.16093 Y26.65970
G01 X-86.14115 Y26.67072
G01 X-86.10393 Y26.69851
G01 X-85.99162 Y26.78830
G01 X-85.98212 Y26.79729
G01 X-85.93441 Y26.84700
G01 X-85.86345 Y26.92863
G01 X-85.83459 Y26.96798
G01 X-85.79667 Y27.02536
G01 X-85.75966 Y27.08779
G01 X-85.72281 Y27.16374
G01 X-85.72095 Y27.16755
G01 X-85.69289 Y27.22622
G01 X-85.68491 Y27.24237
G01 X-85.66368 Y27.28408
G01 X-85.61498 Y27.36648
G01 X-85.56670 Y27.43783
G01 X-85.53574 Y27.48106
G01 X-85.49248 Y27.53826
G01 X-85.48834 Y27.54341
G01 X-85.48796 Y27.54390
G01 X-85.48369 Y27.58725
G01 X-85.48369 Y27.68329
G01 X-85.48750 Y27.72215
G01 X-85.48753 Y27.72218
G01 X-85.57112 Y27.83226
G01 X-85.61623 Y27.90376
G01 X-85.63734 Y27.93917
G01 X-85.66794 Y27.99383
G01 X-85.69365 Y28.04412
G01 X-85.71707 Y28.09477
G01 X-85.72278 Y28.10684
G01 X-85.75966 Y28.18273
G01 X-85.79667 Y28.24519
G01 X-85.83459 Y28.30260
G01 X-85.86345 Y28.34197
G01 X-85.90139 Y28.38558
G01 X-85.93441 Y28.42355
G01 X-85.98212 Y28.47331
G01 X-85.99164 Y28.48227
G01 X-86.10393 Y28.57204
G01 X-86.14115 Y28.59980
G01 X-86.16093 Y28.61087
G01 X-86.29906 Y28.68517
G01 X-86.30861 Y28.69020
G01 X-86.36327 Y28.71042
G01 X-86.48879 Y28.75098
G01 X-86.51310 Y28.75667
G01 X-86.58087 Y28.76907
G01 X-86.64244 Y28.77724
G01 X-86.71750 Y28.79129
G01 X-86.73584 Y28.79579
G01 X-86.75887 Y28.80097
G01 X-86.80835 Y28.81133
G01 X-86.89621 Y28.83490
G01 X-86.94714 Y28.88748
G01 X-86.98778 Y28.93338
G01 X-87.07124 Y29.04491
G01 X-87.07868 Y29.09858
G01 X-87.06860 Y29.13411
G01 X-87.05588 Y29.17514
G01 X-87.05102 Y29.18946
G01 X-87.03655 Y29.23706
G01 X-87.02931 Y29.26386
G01 X-87.01303 Y29.31631
G01 X-87.00213 Y29.34717
G01 X-86.99080 Y29.38217
G01 X-86.97556 Y29.43389
G01 X-86.96347 Y29.48093
G01 X-86.96126 Y29.50122
G01 X-86.95844 Y29.53137
G01 X-86.95684 Y29.54841
G01 X-86.95651 Y29.55492
G01 X-86.95567 Y29.58931
G01 X-86.95567 Y30.58481
G01 X-86.95349 Y30.64000
G01 X-86.95105 Y30.67099
G01 X-86.91770 Y30.83932
G01 X-86.91605 Y30.84458
G01 X-86.90602 Y30.87871
G01 X-86.89827 Y30.90726
G01 X-86.89042 Y30.93442
G01 X-86.88448 Y30.95390
G01 X-86.86091 Y30.96360
G01 X-86.67866 Y31.01557
G01 X-86.61747 Y31.02527
G01 X-86.50645 Y31.03406
G01 X-86.31094 Y31.03406
G01 X-86.27653 Y31.03492
G01 X-86.26992 Y31.03525
G01 X-86.22283 Y31.03965
G01 X-86.20251 Y31.04186
G01 X-86.15534 Y31.05400
G01 X-86.14816 Y31.05611
G01 X-86.10363 Y31.06926
G01 X-86.07841 Y31.07721
G01 X-86.04041 Y31.09583
G01 X-85.99273 Y31.12103
G01 X-85.96596 Y31.13591
G01 X-85.93553 Y31.15946
G01 X-85.89380 Y31.19360
G01 X-85.86769 Y31.21605
G01 X-85.84518 Y31.24224
G01 X-85.81105 Y31.28395
G01 X-85.78750 Y31.31440
G01 X-85.77269 Y31.34099
G01 X-85.74750 Y31.38867
G01 X-85.73701 Y31.40935
G01 X-85.72880 Y31.42682
G01 X-85.72080 Y31.45217
G01 X-85.70556 Y31.50388
G01 X-85.69344 Y31.55095
G01 X-85.69126 Y31.57122
G01 X-85.68684 Y31.61834
G01 X-85.68651 Y31.62492
G01 X-85.68567 Y31.65931
G01 X-85.68567 Y32.90932
G01 X-85.68651 Y32.94373
G01 X-85.68684 Y32.95031
G01 X-85.69126 Y32.99743
G01 X-85.69344 Y33.01770
G01 X-85.70556 Y33.06477
G01 X-85.72080 Y33.11648
G01 X-85.72880 Y33.14185
G01 X-85.74750 Y33.17998
G01 X-85.77269 Y33.22766
G01 X-85.78753 Y33.25427
G01 X-85.81100 Y33.28463
G01 X-85.84511 Y33.32636
G01 X-85.88283 Y33.36885
G01 X-85.89014 Y33.37609
G01 X-85.89179 Y33.37769
G01 X-85.90129 Y33.38701
G01 X-85.92969 Y33.41653
G01 X-85.97439 Y33.46570
G01 X-85.98140 Y33.50365
G01 X-85.99108 Y33.56484
G01 X-85.99987 Y33.67571
G01 X-85.99987 Y34.18915
G01 X-85.99012 Y34.30604
G01 X-85.97991 Y34.36723
G01 X-85.89250 Y34.62168
G01 X-85.86070 Y34.68287
G01 X-85.86014 Y34.68391
G01 X-85.86012 Y34.72511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.86014 Y34.68391 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.86014 Y34.68391
G01 X-85.82911 Y34.70103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.37793 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.37793 Y33.57716
G01 X-84.37793 Y33.60591
G01 X-84.45039 Y33.54681
G01 X-84.51598 Y33.46639
G01 X-84.56398 Y33.37449
G01 X-84.59337 Y33.27175
G01 X-84.59792 Y33.22057
G01 X-84.59792 Y33.12433
G01 X-84.57793 Y33.12433
G01 X-84.57793 Y33.18432
G01 X-84.56853 Y33.27990
G01 X-84.54064 Y33.37183
G01 X-84.49535 Y33.45653
G01 X-84.43442 Y33.53080
G01 X-84.37793 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.65713 Y34.42001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.65713 Y34.42001
G01 X-82.52177 Y34.40667
G01 X-82.42571 Y34.40667
G01 X-82.37867 Y34.41130
G01 X-81.83793 Y33.87058
G01 X-81.83793 Y33.42285
G01 X-81.84616 Y33.41462
G01 X-81.88037 Y33.37294
G01 X-81.93374 Y33.29309
G01 X-81.95914 Y33.24554
G01 X-81.99592 Y33.15679
G01 X-82.01156 Y33.10520
G01 X-82.03028 Y33.01099
G01 X-82.03557 Y32.95735
G01 X-82.03793 Y32.90932
G01 X-82.03793 Y31.65931
G01 X-82.03557 Y31.61128
G01 X-82.03485 Y31.60432
G01 X-81.99294 Y31.56632
G01 X-81.98799 Y31.56182
G01 X-81.95210 Y31.52893
G01 X-81.91161 Y31.49377
G01 X-81.90216 Y31.48600
G01 X-81.86325 Y31.45209
G01 X-81.84126 Y31.43172
G01 X-81.80879 Y31.40340
G01 X-81.79658 Y31.39337
G01 X-81.76498 Y31.36568
G01 X-81.74982 Y31.35151
G01 X-81.72109 Y31.32636
G01 X-81.70791 Y31.31554
G01 X-81.67961 Y31.29070
G01 X-81.66704 Y31.27889
G01 X-81.63973 Y31.25491
G01 X-81.62612 Y31.24374
G01 X-81.59881 Y31.21976
G01 X-81.58624 Y31.20795
G01 X-81.55794 Y31.18311
G01 X-81.54476 Y31.17229
G01 X-81.51603 Y31.14714
G01 X-81.50087 Y31.13297
G01 X-81.46927 Y31.10528
G01 X-81.45705 Y31.09525
G01 X-81.42459 Y31.06693
G01 X-81.40260 Y31.04656
G01 X-81.36368 Y31.01265
G01 X-81.35424 Y31.00488
G01 X-81.31375 Y30.96972
G01 X-81.29648 Y30.95390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.03485 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.03485 Y31.60432
G01 X-82.49795 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.39053 Y30.97302 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.39053 Y30.97302
G01 X-84.39053 Y31.00183
G01 X-84.43442 Y31.03782
G01 X-84.49535 Y31.11209
G01 X-84.54064 Y31.19680
G01 X-84.56853 Y31.28872
G01 X-84.57793 Y31.38430
G01 X-84.57793 Y31.44432
G01 X-84.59792 Y31.44432
G01 X-84.59792 Y31.34808
G01 X-84.59337 Y31.29690
G01 X-84.56398 Y31.19416
G01 X-84.51598 Y31.10226
G01 X-84.45039 Y31.02184
G01 X-84.39053 Y30.97302
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-86.88448 Y30.95390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-86.88448 Y30.95390
G01 X-86.90175 Y30.96972
G01 X-86.94224 Y31.00488
G01 X-86.95168 Y31.01265
G01 X-86.99060 Y31.04656
G01 X-87.01259 Y31.06693
G01 X-87.04505 Y31.09525
G01 X-87.05727 Y31.10528
G01 X-87.08887 Y31.13297
G01 X-87.10403 Y31.14714
G01 X-87.13276 Y31.17229
G01 X-87.14594 Y31.18311
G01 X-87.17424 Y31.20795
G01 X-87.18681 Y31.21976
G01 X-87.21412 Y31.24374
G01 X-87.22773 Y31.25491
G01 X-87.25504 Y31.27889
G01 X-87.26761 Y31.29070
G01 X-87.29591 Y31.31554
G01 X-87.30909 Y31.32636
G01 X-87.33782 Y31.35151
G01 X-87.35298 Y31.36568
G01 X-87.38458 Y31.39337
G01 X-87.39679 Y31.40340
G01 X-87.42926 Y31.43172
G01 X-87.45125 Y31.45209
G01 X-87.49016 Y31.48600
G01 X-87.49961 Y31.49377
G01 X-87.54010 Y31.52893
G01 X-87.57599 Y31.56182
G01 X-87.58094 Y31.56632
G01 X-87.62285 Y31.60432
G01 X-87.62357 Y31.61128
G01 X-87.62593 Y31.65931
G01 X-87.62593 Y32.90932
G01 X-87.62357 Y32.95735
G01 X-87.61828 Y33.01099
G01 X-87.59956 Y33.10520
G01 X-87.58392 Y33.15679
G01 X-87.54714 Y33.24554
G01 X-87.54013 Y33.25864
G01 X-87.54013 Y33.53741
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.96593 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.96593 Y33.57716
G01 X-90.02242 Y33.53080
G01 X-90.08335 Y33.45653
G01 X-90.12864 Y33.37183
G01 X-90.15653 Y33.27990
G01 X-90.16593 Y33.18432
G01 X-90.16593 Y33.12433
G01 X-90.18592 Y33.12433
G01 X-90.18592 Y33.22057
G01 X-90.18137 Y33.27175
G01 X-90.15198 Y33.37449
G01 X-90.10398 Y33.46639
G01 X-90.03839 Y33.54681
G01 X-89.96593 Y33.60591
G01 X-89.96593 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.46485 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.46485 Y31.60432
G01 X-93.92795 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.91712 Y31.06688 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.91712 Y31.06688
G01 X-95.94598 Y31.10226
G01 X-95.99398 Y31.19416
G01 X-96.02337 Y31.29690
G01 X-96.02792 Y31.34808
G01 X-96.02792 Y31.44432
G01 X-96.00793 Y31.44432
G01 X-96.00793 Y31.38430
G01 X-95.99853 Y31.28872
G01 X-95.97064 Y31.19680
G01 X-95.92535 Y31.11209
G01 X-95.91712 Y31.10206
G01 X-95.91712 Y31.06688
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.80793 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.80793 Y33.57716
G01 X-95.86442 Y33.53080
G01 X-95.92535 Y33.45653
G01 X-95.97064 Y33.37183
G01 X-95.99853 Y33.27990
G01 X-96.00793 Y33.18432
G01 X-96.00793 Y33.12433
G01 X-96.02792 Y33.12433
G01 X-96.02792 Y33.22057
G01 X-96.02337 Y33.27175
G01 X-95.99398 Y33.37449
G01 X-95.94598 Y33.46639
G01 X-95.88039 Y33.54681
G01 X-95.80793 Y33.60591
G01 X-95.80793 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.28393 Y33.48420 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.28393 Y33.48420
G01 X-93.30593 Y33.44322
G01 X-93.30593 Y33.37835
G01 X-93.31037 Y33.37294
G01 X-93.36374 Y33.29309
G01 X-93.38914 Y33.24554
G01 X-93.42592 Y33.15679
G01 X-93.44156 Y33.10520
G01 X-93.46028 Y33.01099
G01 X-93.46557 Y32.95735
G01 X-93.46793 Y32.90932
G01 X-93.46793 Y31.65931
G01 X-93.46557 Y31.61128
G01 X-93.46485 Y31.60432
G01 X-93.42294 Y31.56632
G01 X-93.41799 Y31.56182
G01 X-93.38210 Y31.52893
G01 X-93.34161 Y31.49377
G01 X-93.33216 Y31.48600
G01 X-93.29325 Y31.45209
G01 X-93.27126 Y31.43172
G01 X-93.23879 Y31.40340
G01 X-93.22658 Y31.39337
G01 X-93.19498 Y31.36568
G01 X-93.17982 Y31.35151
G01 X-93.15109 Y31.32636
G01 X-93.13791 Y31.31554
G01 X-93.10961 Y31.29070
G01 X-93.09704 Y31.27889
G01 X-93.06973 Y31.25491
G01 X-93.05612 Y31.24374
G01 X-93.02881 Y31.21976
G01 X-93.01624 Y31.20795
G01 X-92.98794 Y31.18311
G01 X-92.97476 Y31.17229
G01 X-92.94603 Y31.14714
G01 X-92.93087 Y31.13297
G01 X-92.89927 Y31.10528
G01 X-92.88705 Y31.09525
G01 X-92.85459 Y31.06693
G01 X-92.83260 Y31.04656
G01 X-92.79368 Y31.01265
G01 X-92.78424 Y31.00488
G01 X-92.74375 Y30.96972
G01 X-92.72648 Y30.95390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.08013 Y31.07302 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.08013 Y31.07302
G01 X-90.10398 Y31.10226
G01 X-90.15198 Y31.19416
G01 X-90.18137 Y31.29690
G01 X-90.18592 Y31.34808
G01 X-90.18592 Y31.44432
G01 X-90.16593 Y31.44432
G01 X-90.16593 Y31.38430
G01 X-90.15653 Y31.28872
G01 X-90.12864 Y31.19680
G01 X-90.08335 Y31.11209
G01 X-90.08013 Y31.10815
G01 X-90.08013 Y31.07302
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.08595 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.08595 Y31.60432
G01 X-87.62285 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.48750 Y27.72215 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.48750 Y27.72215
G01 X-85.48562 Y27.71967
G01 X-85.45979 Y27.71113
G01 X-85.40000 Y27.69813
G01 X-85.29830 Y27.68685
G01 X-85.19644 Y27.69701
G01 X-85.18009 Y27.70222
G01 X-85.09896 Y27.72807
G01 X-85.04293 Y27.75263
G01 X-84.96452 Y27.79594
G01 X-84.89530 Y27.85281
G01 X-84.83759 Y27.92134
G01 X-84.81128 Y27.95911
G01 X-84.75718 Y28.06018
G01 X-84.70371 Y28.19647
G01 X-84.60554 Y28.36650
G01 X-84.48311 Y28.51999
G01 X-84.39053 Y28.60590
G01 X-84.39053 Y28.57598
G01 X-84.39667 Y28.57092
G01 X-84.46459 Y28.50303
G01 X-84.56408 Y28.38177
G01 X-84.61745 Y28.30193
G01 X-84.69139 Y28.16361
G01 X-84.72814 Y28.07486
G01 X-84.77366 Y27.92477
G01 X-84.79241 Y27.83056
G01 X-84.80777 Y27.67448
G01 X-84.80777 Y27.57844
G01 X-84.79241 Y27.42236
G01 X-84.77366 Y27.32815
G01 X-84.72814 Y27.17811
G01 X-84.69139 Y27.08936
G01 X-84.61745 Y26.95104
G01 X-84.57915 Y26.89368
G01 X-84.60970 Y26.89368
G01 X-84.70368 Y27.05647
G01 X-84.76081 Y27.20201
G01 X-84.79441 Y27.27118
G01 X-84.83846 Y27.33425
G01 X-84.87732 Y27.38151
G01 X-84.95029 Y27.45345
G01 X-85.03665 Y27.50859
G01 X-85.13259 Y27.54458
G01 X-85.19182 Y27.56000
G01 X-85.29309 Y27.57522
G01 X-85.39535 Y27.56909
G01 X-85.48834 Y27.54341
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.80937 Y26.87278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.80937 Y26.87278
G01 X-87.81528 Y26.87994
G01 X-87.86865 Y26.95982
G01 X-87.94259 Y27.09813
G01 X-87.97934 Y27.18687
G01 X-88.02486 Y27.33696
G01 X-88.04134 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.25622 Y27.74834 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.25622 Y27.74834
G01 X-91.24949 Y27.67892
G01 X-91.24949 Y27.58284
G01 X-91.25592 Y27.51756
G01 X-91.25630 Y27.51705
G01 X-91.26687 Y27.50425
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.56699 Y26.88715 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.56699 Y26.88715
G01 X-93.59805 Y26.89785
G01 X-93.59993 Y26.89752
G01 X-93.65871 Y26.88053
G01 X-93.75355 Y26.84197
G01 X-93.83828 Y26.78456
G01 X-93.88012 Y26.74110
G01 X-93.90928 Y26.71080
G01 X-93.92508 Y26.69048
G01 X-94.19650 Y26.69048
G01 X-94.13267 Y26.75431
G01 X-94.03318 Y26.87555
G01 X-93.97981 Y26.95543
G01 X-93.90590 Y27.09373
G01 X-93.86912 Y27.18248
G01 X-93.82360 Y27.33257
G01 X-93.80714 Y27.41532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.91712 Y28.60534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.91712 Y28.60534
G01 X-95.95367 Y28.57534
G01 X-96.02159 Y28.50740
G01 X-96.05159 Y28.47090
G01 X-96.08281 Y28.47090
G01 X-96.04011 Y28.52439
G01 X-95.91712 Y28.63851
G01 X-95.91712 Y28.60534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.95776 Y26.69048 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.95776 Y26.69048
G01 X-96.09731 Y26.69048
G01 X-96.09731 Y26.69094
G01 X-96.12218 Y26.79086
G01 X-96.05159 Y26.79086
G01 X-96.02159 Y26.75431
G01 X-95.95776 Y26.69048
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.22508 Y23.80535 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.22508 Y23.80535
G01 X-94.22089 Y23.80022
G01 X-94.16752 Y23.72033
G01 X-94.14443 Y23.67713
G01 X-94.10768 Y23.58838
G01 X-94.09343 Y23.54147
G01 X-94.07471 Y23.44726
G01 X-94.06991 Y23.39849
G01 X-94.06755 Y23.35046
G01 X-94.06755 Y22.75046
G01 X-94.06991 Y22.70243
G01 X-94.07471 Y22.65366
G01 X-94.09343 Y22.55945
G01 X-94.10768 Y22.51256
G01 X-94.14443 Y22.42382
G01 X-94.16752 Y22.38059
G01 X-94.22089 Y22.30073
G01 X-94.23714 Y22.28094
G01 X-94.23714 Y18.44531
G01 X-94.20059 Y18.41531
G01 X-94.13267 Y18.34740
G01 X-94.03318 Y18.22616
G01 X-93.97981 Y18.14630
G01 X-93.90590 Y18.00800
G01 X-93.86912 Y17.91925
G01 X-93.82711 Y17.78075
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.93048 Y14.94258 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.93048 Y14.94258
G01 X-96.96282 Y14.97966
G01 X-96.97407 Y14.99236
G01 X-97.03350 Y15.05832
G01 X-97.08395 Y15.10948
G01 X-97.10058 Y15.12490
G01 X-97.12319 Y15.14674
G01 X-97.13589 Y15.15954
G01 X-97.16320 Y15.18563
G01 X-97.18616 Y15.20646
G01 X-97.21105 Y15.23018
G01 X-97.28420 Y15.30331
G01 X-98.08102 Y16.10013
G01 X-98.16566 Y16.17234
G01 X-98.21575 Y16.20877
G01 X-98.22065 Y16.21230
G01 X-98.35565 Y16.23058
G01 X-98.37119 Y16.23119
G01 X-98.39873 Y16.23173
G01 X-99.99293 Y16.23173
G01 X-100.03357 Y16.23290
G01 X-100.05107 Y16.23495
G01 X-100.13721 Y16.26142
G01 X-100.20970 Y16.30526
G01 X-100.26964 Y16.36520
G01 X-100.31348 Y16.43770
G01 X-100.33995 Y16.52383
G01 X-100.34201 Y16.54133
G01 X-100.34317 Y16.58197
G01 X-100.34317 Y18.98196
G01 X-100.34201 Y19.02263
G01 X-100.33995 Y19.04013
G01 X-100.31348 Y19.12626
G01 X-100.26967 Y19.19873
G01 X-100.20335 Y19.29484
G01 X-100.16319 Y19.34831
G01 X-100.06873 Y19.46449
G01 X-99.99293 Y19.47195
G01 X-97.59294 Y19.47195
G01 X-97.49733 Y19.46256
G01 X-97.40541 Y19.43467
G01 X-97.32070 Y19.38938
G01 X-97.24646 Y19.32844
G01 X-97.18552 Y19.25420
G01 X-97.14023 Y19.16947
G01 X-97.11234 Y19.07757
G01 X-97.10295 Y18.98196
G01 X-97.10295 Y17.30028
G01 X-96.36797 Y16.56531
G01 X-95.99254 Y16.56531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.16165 Y16.56533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.16165 Y16.56533
G01 X-94.13267 Y16.59431
G01 X-94.03318 Y16.71555
G01 X-93.97981 Y16.79543
G01 X-93.90590 Y16.93373
G01 X-93.86912 Y17.02248
G01 X-93.82713 Y17.16086
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.79193 Y16.56531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.79193 Y16.56531
G01 X-94.16165 Y16.56533
G01 X-94.21448 Y16.54341
G01 X-94.37128 Y16.48728
G01 X-94.44971 Y16.46343
G01 X-94.60656 Y16.42413
G01 X-94.67361 Y16.41077
G01 X-94.83043 Y16.38751
G01 X-94.89104 Y16.38154
G01 X-95.04788 Y16.37382
G01 X-95.10638 Y16.37382
G01 X-95.26320 Y16.38154
G01 X-95.32378 Y16.38751
G01 X-95.48062 Y16.41077
G01 X-95.54773 Y16.42416
G01 X-95.70458 Y16.46343
G01 X-95.78291 Y16.48728
G01 X-95.93973 Y16.54339
G01 X-95.99254 Y16.56531
G01 X-96.02159 Y16.59431
G01 X-96.12108 Y16.71555
G01 X-96.17445 Y16.79543
G01 X-96.24839 Y16.93373
G01 X-96.28514 Y17.02248
G01 X-96.33066 Y17.17254
G01 X-96.34941 Y17.26675
G01 X-96.36477 Y17.42284
G01 X-96.36477 Y17.51890
G01 X-96.34941 Y17.67496
G01 X-96.33066 Y17.76916
G01 X-96.28514 Y17.91925
G01 X-96.24839 Y18.00800
G01 X-96.17445 Y18.14630
G01 X-96.12108 Y18.22616
G01 X-96.02159 Y18.34740
G01 X-95.95367 Y18.41531
G01 X-95.91712 Y18.44531
G01 X-95.91712 Y21.41930
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.17589 Y19.74132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.17589 Y19.74132
G01 X-100.15278 Y19.73043
G01 X-100.12875 Y19.68676
G01 X-100.10500 Y19.63037
G01 X-100.07533 Y19.53238
G01 X-100.06949 Y19.46357
G01 X-100.16319 Y19.34831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.42692 Y17.45791 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.42692 Y17.45791
G01 X-101.42694 Y19.45529
G01 X-101.41104 Y19.57907
G01 X-101.39842 Y19.62743
G01 X-101.37154 Y19.70099
G01 X-101.36657 Y19.71465
G01 X-101.31881 Y19.79431
G01 X-101.25689 Y19.86352
G01 X-101.21196 Y19.90505
G01 X-101.15425 Y19.94813
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-99.67043 Y21.42130 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-99.67043 Y21.42130
G01 X-100.25880 Y21.42130
G01 X-101.26535 Y22.42785
G01 X-101.26535 Y23.54010
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-97.44862 Y23.87875 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-97.44862 Y23.87875
G01 X-97.56563 Y24.02135
G01 X-97.63355 Y24.08927
G01 X-97.69238 Y24.13753
G01 X-97.81539 Y24.23849
G01 X-97.89527 Y24.29186
G01 X-97.95293 Y24.32269
G01 X-97.95293 Y24.35437
G01 X-97.93609 Y24.34606
G01 X-97.74968 Y24.22153
G01 X-97.73647 Y24.20992
G01 X-97.67488 Y24.16394
G01 X-97.60686 Y24.12813
G01 X-97.55065 Y24.10398
G01 X-97.45283 Y24.07360
G01 X-97.39594 Y24.06836
G01 X-97.34044 Y24.10306
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.89847 Y27.66556 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.89847 Y27.66556
G01 X-100.97055 Y27.65271
G01 X-101.02933 Y27.63574
G01 X-101.12422 Y27.59721
G01 X-101.20903 Y27.53981
G01 X-101.26357 Y27.48314
G01 X-101.27358 Y27.46092
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.40992 Y28.90689 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.40992 Y28.90689
G01 X-102.40995 Y28.94783
G01 X-102.41934 Y29.04341
G01 X-102.44723 Y29.13536
G01 X-102.49252 Y29.22004
G01 X-102.55346 Y29.29429
G01 X-102.62770 Y29.35522
G01 X-102.71241 Y29.40051
G01 X-102.80433 Y29.42840
G01 X-102.89994 Y29.43782
G01 X-103.01635 Y29.43782
G01 X-103.08391 Y29.40181
G01 X-103.16102 Y29.36985
G01 X-103.36461 Y29.31430
G01 X-103.44172 Y29.30414
G01 X-103.53397 Y29.29807
G01 X-104.49993 Y29.29807
G01 X-104.54057 Y29.29693
G01 X-104.55808 Y29.29485
G01 X-104.64418 Y29.26838
G01 X-104.69633 Y29.23808
G01 X-104.71675 Y29.22451
G01 X-104.77664 Y29.16462
G01 X-104.82048 Y29.09213
G01 X-104.84695 Y29.00600
G01 X-104.84901 Y28.98850
G01 X-104.85018 Y28.94783
G01 X-104.85018 Y27.34781
G01 X-104.84901 Y27.30717
G01 X-104.84695 Y27.28967
G01 X-104.82048 Y27.20354
G01 X-104.77669 Y27.13107
G01 X-104.69376 Y27.05162
G01 X-104.65686 Y27.02162
G01 X-104.62495 Y26.99709
G01 X-104.58779 Y26.97006
G01 X-104.56641 Y26.86534
G01 X-104.55625 Y26.78820
G01 X-104.55018 Y26.69594
G01 X-104.55018 Y25.61632
G01 X-104.55167 Y25.57037
G01 X-104.55424 Y25.53146
G01 X-104.57078 Y25.41807
G01 X-104.58810 Y25.39455
G01 X-104.63547 Y25.33285
G01 X-104.69640 Y25.26331
G01 X-105.93788 Y24.02181
G01 X-105.97146 Y23.99036
G01 X-106.00077 Y23.96468
G01 X-106.09262 Y23.89620
G01 X-106.12155 Y23.89181
G01 X-106.19866 Y23.88167
G01 X-106.29091 Y23.87558
G01 X-110.93894 Y23.87558
G01 X-110.97340 Y23.87474
G01 X-111.00566 Y23.87317
G01 X-111.07091 Y23.86478
G01 X-111.13762 Y23.85290
G01 X-111.13863 Y23.85259
G01 X-111.23215 Y23.82323
G01 X-111.26482 Y23.81208
G01 X-111.29576 Y23.79686
G01 X-111.38265 Y23.75152
G01 X-111.38364 Y23.75102
G01 X-111.43921 Y23.71221
G01 X-111.49123 Y23.67202
G01 X-111.51519 Y23.65031
G01 X-111.54013 Y23.62656
G01 X-113.84813 Y21.31856
G01 X-113.87187 Y21.29362
G01 X-113.89359 Y21.26964
G01 X-113.93377 Y21.21765
G01 X-113.97259 Y21.16202
G01 X-113.97309 Y21.16108
G01 X-113.99133 Y21.12613
G01 X-113.99585 Y21.11760
G01 X-113.99956 Y21.11074
G01 X-114.02016 Y21.07510
G01 X-114.05239 Y21.02288
G01 X-114.05752 Y21.01445
G01 X-114.09331 Y20.95473
G01 X-114.11010 Y20.92796
G01 X-114.15699 Y20.85631
G01 X-114.22476 Y20.76448
G01 X-114.23570 Y20.75118
G01 X-114.23609 Y20.75105
G01 X-114.31058 Y20.73108
G01 X-114.39471 Y20.71625
G01 X-114.48013 Y20.71625
G01 X-114.56425 Y20.73108
G01 X-114.63875 Y20.75105
G01 X-114.71902 Y20.78026
G01 X-114.78155 Y20.81635
G01 X-114.79692 Y20.84236
G01 X-114.79692 Y20.84239
G01 X-114.83293 Y20.90332
G01 X-114.86486 Y20.98046
G01 X-114.92044 Y21.18402
G01 X-114.93057 Y21.26113
G01 X-114.93667 Y21.35336
G01 X-114.93667 Y21.96034
G01 X-114.93751 Y21.99481
G01 X-114.93908 Y22.02704
G01 X-114.94749 Y22.09232
G01 X-114.95932 Y22.15900
G01 X-114.95965 Y22.16006
G01 X-114.98904 Y22.25359
G01 X-115.00017 Y22.28622
G01 X-115.01538 Y22.31719
G01 X-115.06072 Y22.40408
G01 X-115.06123 Y22.40502
G01 X-115.09613 Y22.45552
G01 X-115.10004 Y22.46062
G01 X-115.14022 Y22.51264
G01 X-115.16197 Y22.53662
G01 X-115.18569 Y22.56156
G01 X-116.91370 Y24.28955
G01 X-116.93865 Y24.31330
G01 X-116.96260 Y24.33501
G01 X-117.01462 Y24.37520
G01 X-117.07022 Y24.41403
G01 X-117.07118 Y24.41452
G01 X-117.15808 Y24.45988
G01 X-117.18901 Y24.47507
G01 X-117.22168 Y24.48619
G01 X-117.31520 Y24.51558
G01 X-117.31624 Y24.51591
G01 X-117.38294 Y24.52777
G01 X-117.40080 Y24.53009
G01 X-117.48020 Y24.54025
G01 X-117.48137 Y24.54042
G01 X-117.51495 Y24.54467
G01 X-117.52780 Y24.54639
G01 X-117.56669 Y24.55206
G01 X-117.71561 Y24.58922
G01 X-117.79275 Y24.61652
G01 X-117.94095 Y24.69369
G01 X-117.94327 Y24.69686
G01 X-117.98071 Y24.77362
G01 X-118.00837 Y24.84560
G01 X-118.03194 Y24.92780
G01 X-118.04088 Y25.01284
G01 X-118.03488 Y25.09813
G01 X-118.02643 Y25.15147
G01 X-118.00852 Y25.17202
G01 X-117.90298 Y25.27685
G01 X-117.84121 Y25.32925
G01 X-117.83341 Y25.33577
G01 X-117.77276 Y25.38591
G01 X-117.71627 Y25.42815
G01 X-117.69645 Y25.44151
G01 X-117.66166 Y25.46656
G01 X-117.65990 Y25.46796
G01 X-117.57992 Y25.52970
G01 X-117.53852 Y25.56724
G01 X-117.48983 Y25.61591
G01 X-117.44845 Y25.66155
G01 X-117.42846 Y25.68459
G01 X-117.39712 Y25.71919
G01 X-117.38472 Y25.73252
G01 X-117.33463 Y25.78505
G01 X-117.28510 Y25.83262
G01 X-117.22340 Y25.88713
G01 X-117.21180 Y25.89719
G01 X-117.13671 Y25.96127
G01 X-117.11129 Y25.98119
G01 X-117.07342 Y26.10600
G01 X-117.05693 Y26.18876
G01 X-117.05693 Y27.41974
G01 X-117.04047 Y27.50262
G01 X-116.99493 Y27.65271
G01 X-116.95818 Y27.74143
G01 X-116.88426 Y27.87976
G01 X-116.83090 Y27.95962
G01 X-116.77692 Y28.02538
G01 X-116.77692 Y28.61425
G01 X-116.83090 Y28.68001
G01 X-116.88426 Y28.75987
G01 X-116.95818 Y28.89817
G01 X-116.99493 Y28.98692
G01 X-117.04047 Y29.13701
G01 X-117.05693 Y29.21971
G01 X-117.05693 Y30.45072
G01 X-117.04047 Y30.53363
G01 X-117.00260 Y30.65847
G01 X-117.00230 Y30.65867
G01 X-117.00230 Y30.65870
G01 X-116.97723 Y30.67831
G01 X-116.90204 Y30.74247
G01 X-116.89044 Y30.75255
G01 X-116.82874 Y30.80704
G01 X-116.77921 Y30.85463
G01 X-116.72910 Y30.90716
G01 X-116.71683 Y30.92037
G01 X-116.68548 Y30.95494
G01 X-116.66524 Y30.97826
G01 X-116.62399 Y31.02377
G01 X-116.57535 Y31.07241
G01 X-116.53392 Y31.10996
G01 X-116.45396 Y31.17173
G01 X-116.39742 Y31.21112
G01 X-116.38835 Y31.21679
G01 X-116.25879 Y31.28443
G01 X-116.22780 Y31.29964
G01 X-116.19509 Y31.31082
G01 X-116.05566 Y31.35461
G01 X-116.04523 Y31.35700
G01 X-115.97738 Y31.36911
G01 X-115.87715 Y31.38199
G01 X-115.82132 Y31.38473
G01 X-115.75252 Y31.38473
G01 X-115.69669 Y31.38199
G01 X-115.59648 Y31.36911
G01 X-115.52864 Y31.35700
G01 X-115.51823 Y31.35461
G01 X-115.37875 Y31.31082
G01 X-115.37251 Y31.30881
G01 X-115.34601 Y31.29964
G01 X-115.31505 Y31.28443
G01 X-115.18549 Y31.21679
G01 X-115.17642 Y31.21112
G01 X-115.11988 Y31.17173
G01 X-115.03992 Y31.10996
G01 X-114.99849 Y31.07241
G01 X-114.94985 Y31.02377
G01 X-114.90860 Y30.97826
G01 X-114.86260 Y30.92799
G01 X-114.84304 Y30.90856
G01 X-114.80870 Y30.87201
G01 X-114.79379 Y30.85504
G01 X-114.67215 Y30.74219
G01 X-114.64642 Y30.72255
G01 X-114.59351 Y30.67935
G01 X-114.57738 Y30.66530
G01 X-114.57203 Y30.66091
G01 X-114.53342 Y30.53363
G01 X-114.51691 Y30.45072
G01 X-114.51691 Y29.21971
G01 X-114.50047 Y29.13701
G01 X-114.45493 Y28.98692
G01 X-114.41818 Y28.89817
G01 X-114.34426 Y28.75987
G01 X-114.29090 Y28.68001
G01 X-114.23692 Y28.61425
G01 X-114.23692 Y28.02538
G01 X-114.29090 Y27.95962
G01 X-114.34426 Y27.87976
G01 X-114.41818 Y27.74143
G01 X-114.45493 Y27.65271
G01 X-114.50047 Y27.50262
G01 X-114.51691 Y27.41974
G01 X-114.51691 Y26.18876
G01 X-114.50047 Y26.10600
G01 X-114.46187 Y25.97877
G01 X-114.46166 Y25.97862
G01 X-114.45646 Y25.97436
G01 X-114.44040 Y25.96038
G01 X-114.38742 Y25.91713
G01 X-114.36161 Y25.89737
G01 X-114.24000 Y25.78457
G01 X-114.22509 Y25.76757
G01 X-114.19082 Y25.73112
G01 X-114.17116 Y25.71159
G01 X-114.12537 Y25.66155
G01 X-114.08402 Y25.61591
G01 X-114.03532 Y25.56722
G01 X-113.99392 Y25.52970
G01 X-113.91396 Y25.46790
G01 X-113.85740 Y25.42851
G01 X-113.84838 Y25.42287
G01 X-113.71874 Y25.35520
G01 X-113.68778 Y25.34002
G01 X-113.65509 Y25.32884
G01 X-113.51564 Y25.28502
G01 X-113.50525 Y25.28266
G01 X-113.43743 Y25.27057
G01 X-113.33718 Y25.25767
G01 X-113.28138 Y25.25493
G01 X-113.21247 Y25.25493
G01 X-113.15666 Y25.25767
G01 X-113.05643 Y25.27057
G01 X-112.98864 Y25.28266
G01 X-112.97823 Y25.28502
G01 X-112.83875 Y25.32884
G01 X-112.80604 Y25.34002
G01 X-112.77510 Y25.35520
G01 X-112.64546 Y25.42287
G01 X-112.63644 Y25.42851
G01 X-112.57988 Y25.46790
G01 X-112.48481 Y25.54139
G01 X-112.45511 Y25.56310
G01 X-112.41168 Y25.59320
G01 X-112.39588 Y25.60448
G01 X-112.35047 Y25.63773
G01 X-112.25958 Y25.69546
G01 X-112.17460 Y25.74228
G01 X-112.14564 Y25.75767
G01 X-112.12992 Y25.76574
G01 X-112.07569 Y25.86719
G01 X-112.03893 Y25.95591
G01 X-111.99342 Y26.10600
G01 X-111.97693 Y26.18876
G01 X-111.97693 Y27.41974
G01 X-111.96047 Y27.50262
G01 X-111.91493 Y27.65271
G01 X-111.87818 Y27.74143
G01 X-111.80426 Y27.87976
G01 X-111.75090 Y27.95962
G01 X-111.65141 Y28.08085
G01 X-111.58349 Y28.14877
G01 X-111.54739 Y28.17839
G01 X-111.54757 Y28.26665
G01 X-111.58321 Y28.25710
G01 X-111.68542 Y28.25177
G01 X-111.76246 Y28.25581
G01 X-111.84704 Y28.26770
G01 X-111.85125 Y28.26904
G01 X-111.92824 Y28.29406
G01 X-112.00365 Y28.33414
G01 X-112.06832 Y28.37615
G01 X-112.13563 Y28.42871
G01 X-112.19278 Y28.49221
G01 X-112.23807 Y28.56462
G01 X-112.25689 Y28.60158
G01 X-112.26024 Y28.61552
G01 X-112.25743 Y28.64135
G01 X-112.24671 Y28.71593
G01 X-112.23088 Y28.80338
G01 X-112.21432 Y28.87570
G01 X-112.19314 Y28.95177
G01 X-112.19085 Y28.95979
G01 X-112.17129 Y29.02708
G01 X-112.16692 Y29.04151
G01 X-112.16032 Y29.06259
G01 X-112.12763 Y29.16663
G01 X-112.12524 Y29.17702
G01 X-112.11313 Y29.24488
G01 X-112.10025 Y29.34509
G01 X-112.09751 Y29.40092
G01 X-112.09667 Y29.43533
G01 X-112.09667 Y30.23531
G01 X-112.09751 Y30.26972
G01 X-112.10025 Y30.32558
G01 X-112.11313 Y30.42578
G01 X-112.12524 Y30.49370
G01 X-112.12763 Y30.50404
G01 X-112.17145 Y30.64356
G01 X-112.18260 Y30.67617
G01 X-112.19779 Y30.70714
G01 X-112.26545 Y30.83678
G01 X-112.27109 Y30.84580
G01 X-112.31054 Y30.90241
G01 X-112.37231 Y30.98235
G01 X-112.40985 Y31.02377
G01 X-112.45849 Y31.07241
G01 X-112.49992 Y31.10996
G01 X-112.57988 Y31.17173
G01 X-112.63642 Y31.21112
G01 X-112.64549 Y31.21679
G01 X-112.77505 Y31.28443
G01 X-112.80601 Y31.29964
G01 X-112.83251 Y31.30881
G01 X-112.83875 Y31.31082
G01 X-112.97823 Y31.35461
G01 X-112.98864 Y31.35700
G01 X-113.05648 Y31.36911
G01 X-113.15669 Y31.38199
G01 X-113.21252 Y31.38473
G01 X-113.28132 Y31.38473
G01 X-113.33715 Y31.38199
G01 X-113.43738 Y31.36911
G01 X-113.50523 Y31.35700
G01 X-113.51566 Y31.35461
G01 X-113.65509 Y31.31082
G01 X-113.68780 Y31.29964
G01 X-113.71879 Y31.28443
G01 X-113.84835 Y31.21679
G01 X-113.85742 Y31.21112
G01 X-113.91396 Y31.17173
G01 X-113.99392 Y31.10996
G01 X-114.03535 Y31.07241
G01 X-114.08399 Y31.02377
G01 X-114.12524 Y30.97826
G01 X-114.14548 Y30.95494
G01 X-114.17683 Y30.92037
G01 X-114.18910 Y30.90716
G01 X-114.23921 Y30.85463
G01 X-114.28874 Y30.80704
G01 X-114.35044 Y30.75255
G01 X-114.36204 Y30.74247
G01 X-114.43723 Y30.67831
G01 X-114.46230 Y30.65870
G01 X-114.46230 Y30.65867
G01 X-114.46260 Y30.65847
G01 X-114.50047 Y30.53363
G01 X-114.51691 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.46230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.46230 Y30.65867
G01 X-114.49275 Y30.65550
G01 X-114.57203 Y30.66091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.13669 Y36.61228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.13669 Y36.61228
G01 X-117.11154 Y36.63194
G01 X-117.11129 Y36.63214
G01 X-117.07342 Y36.75701
G01 X-117.05693 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.00166 Y36.62958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.00166 Y36.62958
G01 X-117.08104 Y36.63514
G01 X-117.11154 Y36.63194
G01 X-117.11157 Y36.63194
G01 X-117.13669 Y36.61228
G01 X-117.21177 Y36.54820
G01 X-117.22330 Y36.53819
G01 X-117.28502 Y36.48373
G01 X-117.33463 Y36.43606
G01 X-117.38472 Y36.38353
G01 X-117.39712 Y36.37019
G01 X-117.42846 Y36.33560
G01 X-117.44847 Y36.31256
G01 X-117.48983 Y36.26692
G01 X-117.53852 Y36.21823
G01 X-117.57994 Y36.18068
G01 X-117.65988 Y36.11891
G01 X-117.71644 Y36.07952
G01 X-117.72549 Y36.07385
G01 X-117.85508 Y36.00621
G01 X-117.88607 Y35.99100
G01 X-117.91870 Y35.97985
G01 X-118.05820 Y35.93603
G01 X-118.06859 Y35.93364
G01 X-118.13648 Y35.92153
G01 X-118.23669 Y35.90865
G01 X-118.29252 Y35.90591
G01 X-118.36132 Y35.90591
G01 X-118.41715 Y35.90865
G01 X-118.51738 Y35.92153
G01 X-118.58530 Y35.93364
G01 X-118.59566 Y35.93603
G01 X-118.73516 Y35.97985
G01 X-118.76778 Y35.99100
G01 X-118.79876 Y36.00621
G01 X-118.92838 Y36.07385
G01 X-118.93740 Y36.07952
G01 X-118.99396 Y36.11891
G01 X-119.07392 Y36.18068
G01 X-119.11532 Y36.21823
G01 X-119.16402 Y36.26692
G01 X-119.20537 Y36.31254
G01 X-119.25121 Y36.36265
G01 X-119.27082 Y36.38213
G01 X-119.30514 Y36.41863
G01 X-119.32000 Y36.43557
G01 X-119.44161 Y36.54837
G01 X-119.46742 Y36.56809
G01 X-119.52043 Y36.61137
G01 X-119.53646 Y36.62534
G01 X-119.54166 Y36.62958
G01 X-119.54187 Y36.62976
G01 X-119.58047 Y36.75701
G01 X-119.59693 Y36.83971
G01 X-119.59693 Y38.07072
G01 X-119.58047 Y38.15363
G01 X-119.53493 Y38.30369
G01 X-119.49818 Y38.39244
G01 X-119.42426 Y38.53074
G01 X-119.37090 Y38.61063
G01 X-119.31692 Y38.67639
G01 X-119.31692 Y39.23397
G01 X-119.36694 Y39.29490
G01 X-119.38588 Y39.31802
G01 X-119.43925 Y39.39787
G01 X-119.51319 Y39.53618
G01 X-119.54994 Y39.62492
G01 X-119.59546 Y39.77501
G01 X-119.61194 Y39.85777
G01 X-119.61194 Y41.08880
G01 X-119.62840 Y41.17163
G01 X-119.66701 Y41.29891
G01 X-119.67237 Y41.30328
G01 X-119.68845 Y41.31728
G01 X-119.74141 Y41.36056
G01 X-119.76724 Y41.38027
G01 X-119.88886 Y41.49307
G01 X-119.90376 Y41.51006
G01 X-119.93803 Y41.54651
G01 X-119.95766 Y41.56602
G01 X-120.00346 Y41.61608
G01 X-120.04484 Y41.66175
G01 X-120.09348 Y41.71039
G01 X-120.13490 Y41.74793
G01 X-120.21484 Y41.80971
G01 X-120.27143 Y41.84913
G01 X-120.28047 Y41.85479
G01 X-120.41009 Y41.92243
G01 X-120.44108 Y41.93767
G01 X-120.47377 Y41.94882
G01 X-120.61319 Y41.99261
G01 X-120.62363 Y41.99500
G01 X-120.69147 Y42.00711
G01 X-120.79167 Y42.01999
G01 X-120.84753 Y42.02274
G01 X-120.91634 Y42.02274
G01 X-120.97217 Y42.01999
G01 X-121.07237 Y42.00711
G01 X-121.14021 Y41.99500
G01 X-121.15065 Y41.99261
G01 X-121.29010 Y41.94882
G01 X-121.32279 Y41.93767
G01 X-121.35380 Y41.92243
G01 X-121.48337 Y41.85479
G01 X-121.49243 Y41.84910
G01 X-121.54897 Y41.80973
G01 X-121.62891 Y41.74796
G01 X-121.67033 Y41.71042
G01 X-121.71903 Y41.66173
G01 X-121.76038 Y41.61608
G01 X-121.78039 Y41.59304
G01 X-121.81174 Y41.55845
G01 X-121.82413 Y41.54511
G01 X-121.87422 Y41.49259
G01 X-121.92380 Y41.44496
G01 X-121.98547 Y41.39048
G01 X-121.99706 Y41.38045
G01 X-122.07214 Y41.31639
G01 X-122.09759 Y41.29647
G01 X-122.13546 Y41.17163
G01 X-122.15192 Y41.08880
G01 X-122.15192 Y39.85777
G01 X-122.13546 Y39.77501
G01 X-122.08994 Y39.62492
G01 X-122.05319 Y39.53618
G01 X-121.97925 Y39.39787
G01 X-121.92588 Y39.31802
G01 X-121.90694 Y39.29490
G01 X-121.85692 Y39.23397
G01 X-121.85692 Y38.67639
G01 X-121.91090 Y38.61063
G01 X-121.96426 Y38.53074
G01 X-122.03818 Y38.39244
G01 X-122.07493 Y38.30369
G01 X-122.12047 Y38.15363
G01 X-122.13691 Y38.07072
G01 X-122.13691 Y36.83971
G01 X-122.12047 Y36.75701
G01 X-122.08187 Y36.62976
G01 X-122.08166 Y36.62958
G01 X-122.07646 Y36.62534
G01 X-122.06043 Y36.61137
G01 X-122.00742 Y36.56809
G01 X-121.98161 Y36.54837
G01 X-121.86000 Y36.43557
G01 X-121.84514 Y36.41863
G01 X-121.81082 Y36.38213
G01 X-121.79121 Y36.36265
G01 X-121.74537 Y36.31254
G01 X-121.70402 Y36.26692
G01 X-121.65532 Y36.21823
G01 X-121.61392 Y36.18068
G01 X-121.53396 Y36.11891
G01 X-121.47740 Y36.07952
G01 X-121.46838 Y36.07385
G01 X-121.33876 Y36.00621
G01 X-121.30778 Y35.99100
G01 X-121.27516 Y35.97985
G01 X-121.13567 Y35.93603
G01 X-121.12530 Y35.93364
G01 X-121.05738 Y35.92153
G01 X-120.95715 Y35.90865
G01 X-120.90132 Y35.90591
G01 X-120.83252 Y35.90591
G01 X-120.77669 Y35.90865
G01 X-120.67648 Y35.92153
G01 X-120.60859 Y35.93364
G01 X-120.59820 Y35.93603
G01 X-120.45870 Y35.97985
G01 X-120.42607 Y35.99100
G01 X-120.39508 Y36.00621
G01 X-120.26549 Y36.07385
G01 X-120.25644 Y36.07952
G01 X-120.19988 Y36.11891
G01 X-120.11994 Y36.18068
G01 X-120.07852 Y36.21823
G01 X-120.02983 Y36.26692
G01 X-119.98847 Y36.31256
G01 X-119.96846 Y36.33560
G01 X-119.93712 Y36.37019
G01 X-119.92472 Y36.38353
G01 X-119.87463 Y36.43606
G01 X-119.82502 Y36.48373
G01 X-119.76330 Y36.53819
G01 X-119.75177 Y36.54820
G01 X-119.67669 Y36.61228
G01 X-119.65157 Y36.63194
G01 X-119.65154 Y36.63194
G01 X-119.62104 Y36.63514
G01 X-119.54166 Y36.62958
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.67669 Y36.61228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.67669 Y36.61228
G01 X-119.65154 Y36.63194
G01 X-119.65129 Y36.63214
G01 X-119.61342 Y36.75701
G01 X-119.59693 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.59693 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.59693 Y38.07072
G01 X-119.61342 Y38.15363
G01 X-119.65893 Y38.30369
G01 X-119.69569 Y38.39244
G01 X-119.76963 Y38.53074
G01 X-119.82299 Y38.61063
G01 X-119.84192 Y38.63369
G01 X-119.87692 Y38.67634
G01 X-119.87692 Y39.27057
G01 X-119.83798 Y39.31802
G01 X-119.78461 Y39.39787
G01 X-119.71070 Y39.53618
G01 X-119.67392 Y39.62492
G01 X-119.62840 Y39.77501
G01 X-119.61194 Y39.85777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.09191 Y39.76343 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.09191 Y39.76343
G01 X-117.13392 Y39.62492
G01 X-117.17070 Y39.53618
G01 X-117.24461 Y39.39787
G01 X-117.29798 Y39.31802
G01 X-117.33692 Y39.27057
G01 X-117.33692 Y38.67634
G01 X-117.33580 Y38.67499
G01 X-117.28299 Y38.61063
G01 X-117.22963 Y38.53074
G01 X-117.15569 Y38.39244
G01 X-117.11893 Y38.30369
G01 X-117.07342 Y38.15363
G01 X-117.05693 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.59669 Y36.61228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.59669 Y36.61228
G01 X-114.57154 Y36.63194
G01 X-114.57129 Y36.63214
G01 X-114.53342 Y36.75701
G01 X-114.51691 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.46166 Y36.62958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.46166 Y36.62958
G01 X-114.54104 Y36.63514
G01 X-114.57154 Y36.63194
G01 X-114.57157 Y36.63194
G01 X-114.59669 Y36.61228
G01 X-114.67177 Y36.54820
G01 X-114.68330 Y36.53819
G01 X-114.74502 Y36.48373
G01 X-114.79463 Y36.43606
G01 X-114.84472 Y36.38353
G01 X-114.85712 Y36.37019
G01 X-114.88846 Y36.33560
G01 X-114.90847 Y36.31256
G01 X-114.94983 Y36.26692
G01 X-114.99852 Y36.21823
G01 X-115.03994 Y36.18068
G01 X-115.11988 Y36.11891
G01 X-115.17644 Y36.07952
G01 X-115.18549 Y36.07385
G01 X-115.31508 Y36.00621
G01 X-115.34607 Y35.99100
G01 X-115.37870 Y35.97985
G01 X-115.51820 Y35.93603
G01 X-115.52859 Y35.93364
G01 X-115.59648 Y35.92153
G01 X-115.69669 Y35.90865
G01 X-115.75252 Y35.90591
G01 X-115.82132 Y35.90591
G01 X-115.87715 Y35.90865
G01 X-115.97738 Y35.92153
G01 X-116.04530 Y35.93364
G01 X-116.05566 Y35.93603
G01 X-116.19516 Y35.97985
G01 X-116.22778 Y35.99100
G01 X-116.25876 Y36.00621
G01 X-116.38838 Y36.07385
G01 X-116.39740 Y36.07952
G01 X-116.45396 Y36.11891
G01 X-116.53392 Y36.18068
G01 X-116.57532 Y36.21823
G01 X-116.62402 Y36.26692
G01 X-116.66537 Y36.31254
G01 X-116.71121 Y36.36265
G01 X-116.73082 Y36.38213
G01 X-116.76514 Y36.41863
G01 X-116.78000 Y36.43557
G01 X-116.90161 Y36.54837
G01 X-116.92742 Y36.56809
G01 X-116.98043 Y36.61137
G01 X-116.99646 Y36.62534
G01 X-117.00166 Y36.62958
G01 X-117.00187 Y36.62976
G01 X-117.04047 Y36.75701
G01 X-117.05693 Y36.83971
G01 X-117.05693 Y38.07072
G01 X-117.04047 Y38.15363
G01 X-116.99493 Y38.30369
G01 X-116.95818 Y38.39244
G01 X-116.88426 Y38.53074
G01 X-116.83090 Y38.61063
G01 X-116.77692 Y38.67639
G01 X-116.77692 Y38.81680
G01 X-116.78945 Y38.82061
G01 X-116.87187 Y38.86465
G01 X-116.87415 Y38.86590
G01 X-116.94842 Y38.92683
G01 X-117.00936 Y39.00108
G01 X-117.05465 Y39.08581
G01 X-117.08251 Y39.17771
G01 X-117.09193 Y39.27331
G01 X-117.09191 Y39.76343
G01 X-117.09013 Y39.77555
G01 X-117.08076 Y39.87031
G01 X-117.07306 Y40.02716
G01 X-117.07194 Y40.07331
G01 X-117.07194 Y40.87331
G01 X-117.07306 Y40.91949
G01 X-117.08076 Y41.07633
G01 X-117.09013 Y41.17110
G01 X-117.09191 Y41.18319
G01 X-117.09193 Y41.56366
G01 X-117.01614 Y41.67333
G01 X-116.99374 Y41.71456
G01 X-116.95112 Y41.78448
G01 X-116.88929 Y41.87503
G01 X-116.88208 Y41.88540
G01 X-116.87901 Y41.88972
G01 X-116.81871 Y41.95004
G01 X-116.79770 Y41.96399
G01 X-116.74619 Y41.99388
G01 X-116.66006 Y42.02037
G01 X-116.64258 Y42.02241
G01 X-116.60194 Y42.02357
G01 X-116.35991 Y42.02357
G01 X-116.26770 Y42.02964
G01 X-116.19056 Y42.03980
G01 X-115.98696 Y42.09535
G01 X-115.90984 Y42.12731
G01 X-115.84477 Y42.16332
G01 X-115.82564 Y42.17392
G01 X-115.78678 Y42.24123
G01 X-115.75757 Y42.32149
G01 X-115.73761 Y42.39599
G01 X-115.73601 Y42.40503
G01 X-115.73758 Y42.40892
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-115.49194 Y42.16332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-115.49194 Y42.16332
G01 X-115.84479 Y42.16332
G01 X-115.90984 Y42.12731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.09193 Y41.56366 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.09193 Y41.56366
G01 X-117.09917 Y41.55319
G01 X-117.16504 Y41.53678
G01 X-117.23250 Y41.52609
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.09191 Y41.18319 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.09191 Y41.18319
G01 X-117.13392 Y41.32170
G01 X-117.17070 Y41.41044
G01 X-117.23250 Y41.52609
G01 X-117.24218 Y41.53092
G01 X-117.26059 Y41.54026
G01 X-117.34941 Y41.58641
G01 X-117.45515 Y41.65126
G01 X-117.48838 Y41.67524
G01 X-117.52020 Y41.69701
G01 X-117.54911 Y41.71573
G01 X-117.59775 Y41.75014
G01 X-117.67484 Y41.80971
G01 X-117.73143 Y41.84913
G01 X-117.74047 Y41.85479
G01 X-117.87009 Y41.92243
G01 X-117.90108 Y41.93767
G01 X-117.93377 Y41.94882
G01 X-118.07319 Y41.99261
G01 X-118.08363 Y41.99500
G01 X-118.15147 Y42.00711
G01 X-118.25167 Y42.01999
G01 X-118.30753 Y42.02274
G01 X-118.37634 Y42.02274
G01 X-118.43217 Y42.01999
G01 X-118.53237 Y42.00711
G01 X-118.60021 Y41.99500
G01 X-118.61065 Y41.99261
G01 X-118.75010 Y41.94882
G01 X-118.78279 Y41.93767
G01 X-118.81380 Y41.92243
G01 X-118.94337 Y41.85479
G01 X-118.95243 Y41.84910
G01 X-119.00897 Y41.80973
G01 X-119.08891 Y41.74796
G01 X-119.13033 Y41.71042
G01 X-119.17903 Y41.66173
G01 X-119.22038 Y41.61608
G01 X-119.24039 Y41.59304
G01 X-119.27174 Y41.55845
G01 X-119.28413 Y41.54511
G01 X-119.33422 Y41.49259
G01 X-119.38380 Y41.44496
G01 X-119.44547 Y41.39048
G01 X-119.45706 Y41.38045
G01 X-119.53214 Y41.31639
G01 X-119.55759 Y41.29647
G01 X-119.59546 Y41.17163
G01 X-119.61194 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.53214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.53214 Y41.31639
G01 X-119.55731 Y41.29670
G01 X-119.58776 Y41.29350
G01 X-119.66701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.15192 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.15192 Y39.85777
G01 X-122.16840 Y39.77501
G01 X-122.21392 Y39.62492
G01 X-122.25070 Y39.53618
G01 X-122.32461 Y39.39787
G01 X-122.37798 Y39.31802
G01 X-122.41692 Y39.27057
G01 X-122.41692 Y38.67634
G01 X-122.38192 Y38.63369
G01 X-122.36299 Y38.61063
G01 X-122.30963 Y38.53074
G01 X-122.23569 Y38.39244
G01 X-122.19893 Y38.30369
G01 X-122.15342 Y38.15363
G01 X-122.13691 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13691 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13691 Y36.83971
G01 X-122.15342 Y36.75701
G01 X-122.19129 Y36.63214
G01 X-122.19154 Y36.63194
G01 X-122.21669 Y36.61228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.08166 Y36.62958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.08166 Y36.62958
G01 X-122.16104 Y36.63514
G01 X-122.19154 Y36.63194
G01 X-122.19157 Y36.63194
G01 X-122.21669 Y36.61228
G01 X-122.29177 Y36.54820
G01 X-122.30330 Y36.53819
G01 X-122.36503 Y36.48373
G01 X-122.41463 Y36.43606
G01 X-122.46472 Y36.38353
G01 X-122.47712 Y36.37019
G01 X-122.50846 Y36.33560
G01 X-122.52847 Y36.31256
G01 X-122.56983 Y36.26692
G01 X-122.61852 Y36.21823
G01 X-122.65994 Y36.18068
G01 X-122.73988 Y36.11891
G01 X-122.79644 Y36.07952
G01 X-122.80549 Y36.07385
G01 X-122.93508 Y36.00621
G01 X-122.96607 Y35.99100
G01 X-122.99870 Y35.97985
G01 X-123.13820 Y35.93603
G01 X-123.14859 Y35.93364
G01 X-123.21648 Y35.92153
G01 X-123.31669 Y35.90865
G01 X-123.37252 Y35.90591
G01 X-123.44132 Y35.90591
G01 X-123.49715 Y35.90865
G01 X-123.59738 Y35.92153
G01 X-123.66530 Y35.93364
G01 X-123.67566 Y35.93603
G01 X-123.81516 Y35.97985
G01 X-123.84778 Y35.99100
G01 X-123.87876 Y36.00621
G01 X-124.00838 Y36.07385
G01 X-124.01740 Y36.07952
G01 X-124.07396 Y36.11891
G01 X-124.15392 Y36.18068
G01 X-124.19532 Y36.21823
G01 X-124.24402 Y36.26692
G01 X-124.28537 Y36.31254
G01 X-124.33121 Y36.36265
G01 X-124.35082 Y36.38213
G01 X-124.38514 Y36.41863
G01 X-124.40000 Y36.43557
G01 X-124.52161 Y36.54837
G01 X-124.54742 Y36.56809
G01 X-124.60043 Y36.61137
G01 X-124.61646 Y36.62534
G01 X-124.62166 Y36.62958
G01 X-124.62187 Y36.62976
G01 X-124.66047 Y36.75701
G01 X-124.67693 Y36.83971
G01 X-124.67693 Y38.07072
G01 X-124.69342 Y38.15363
G01 X-124.73893 Y38.30369
G01 X-124.77569 Y38.39244
G01 X-124.84963 Y38.53074
G01 X-124.90299 Y38.61063
G01 X-124.92192 Y38.63369
G01 X-124.95692 Y38.67634
G01 X-124.95692 Y39.27057
G01 X-124.91798 Y39.31802
G01 X-124.86461 Y39.39787
G01 X-124.79070 Y39.53618
G01 X-124.75392 Y39.62492
G01 X-124.70840 Y39.77501
G01 X-124.69194 Y39.85777
G01 X-124.69194 Y41.08880
G01 X-124.67546 Y41.17163
G01 X-124.63759 Y41.29647
G01 X-124.61214 Y41.31639
G01 X-124.53706 Y41.38045
G01 X-124.52547 Y41.39048
G01 X-124.46380 Y41.44496
G01 X-124.41422 Y41.49259
G01 X-124.36413 Y41.54511
G01 X-124.35174 Y41.55845
G01 X-124.32039 Y41.59304
G01 X-124.30038 Y41.61608
G01 X-124.25903 Y41.66173
G01 X-124.21033 Y41.71042
G01 X-124.16891 Y41.74796
G01 X-124.08897 Y41.80973
G01 X-124.03243 Y41.84910
G01 X-124.02337 Y41.85479
G01 X-123.89380 Y41.92243
G01 X-123.86279 Y41.93767
G01 X-123.83010 Y41.94882
G01 X-123.69065 Y41.99261
G01 X-123.68021 Y41.99500
G01 X-123.61237 Y42.00711
G01 X-123.51217 Y42.01999
G01 X-123.45634 Y42.02274
G01 X-123.38753 Y42.02274
G01 X-123.33167 Y42.01999
G01 X-123.23147 Y42.00711
G01 X-123.16363 Y41.99500
G01 X-123.15319 Y41.99261
G01 X-123.01377 Y41.94882
G01 X-122.98108 Y41.93767
G01 X-122.95009 Y41.92243
G01 X-122.82047 Y41.85479
G01 X-122.81143 Y41.84913
G01 X-122.75484 Y41.80971
G01 X-122.67490 Y41.74793
G01 X-122.63348 Y41.71039
G01 X-122.58484 Y41.66175
G01 X-122.54346 Y41.61608
G01 X-122.49766 Y41.56602
G01 X-122.47803 Y41.54651
G01 X-122.44376 Y41.51006
G01 X-122.42886 Y41.49307
G01 X-122.30724 Y41.38027
G01 X-122.28141 Y41.36056
G01 X-122.22845 Y41.31728
G01 X-122.21237 Y41.30328
G01 X-122.20701 Y41.29891
G01 X-122.12776 Y41.29350
G01 X-122.09731 Y41.29670
G01 X-122.07214 Y41.31639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.20701 Y41.29891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.20701 Y41.29891
G01 X-122.16840 Y41.17163
G01 X-122.15192 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.69194 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.69194 Y39.85777
G01 X-124.67546 Y39.77501
G01 X-124.62994 Y39.62492
G01 X-124.59319 Y39.53618
G01 X-124.51925 Y39.39787
G01 X-124.46588 Y39.31802
G01 X-124.44694 Y39.29490
G01 X-124.39692 Y39.23397
G01 X-124.39692 Y38.67639
G01 X-124.45090 Y38.61063
G01 X-124.50426 Y38.53074
G01 X-124.57818 Y38.39244
G01 X-124.61493 Y38.30369
G01 X-124.66047 Y38.15363
G01 X-124.67693 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.67693 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.67693 Y36.83971
G01 X-124.69342 Y36.75701
G01 X-124.73129 Y36.63214
G01 X-124.73154 Y36.63194
G01 X-124.75669 Y36.61228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.62166 Y36.62958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.62166 Y36.62958
G01 X-124.70104 Y36.63514
G01 X-124.73154 Y36.63194
G01 X-124.73157 Y36.63194
G01 X-124.75669 Y36.61228
G01 X-124.83177 Y36.54820
G01 X-124.84330 Y36.53819
G01 X-124.90502 Y36.48373
G01 X-124.95463 Y36.43606
G01 X-125.00472 Y36.38353
G01 X-125.01712 Y36.37019
G01 X-125.04846 Y36.33560
G01 X-125.06847 Y36.31256
G01 X-125.10983 Y36.26692
G01 X-125.15852 Y36.21823
G01 X-125.19994 Y36.18068
G01 X-125.27988 Y36.11891
G01 X-125.33644 Y36.07952
G01 X-125.34549 Y36.07385
G01 X-125.47508 Y36.00621
G01 X-125.50607 Y35.99100
G01 X-125.53870 Y35.97985
G01 X-125.67820 Y35.93603
G01 X-125.68859 Y35.93364
G01 X-125.75648 Y35.92153
G01 X-125.85669 Y35.90865
G01 X-125.91252 Y35.90591
G01 X-125.98132 Y35.90591
G01 X-126.03715 Y35.90865
G01 X-126.13738 Y35.92153
G01 X-126.20530 Y35.93364
G01 X-126.21566 Y35.93603
G01 X-126.35516 Y35.97985
G01 X-126.38778 Y35.99100
G01 X-126.41876 Y36.00621
G01 X-126.54838 Y36.07385
G01 X-126.55740 Y36.07952
G01 X-126.61396 Y36.11891
G01 X-126.69392 Y36.18068
G01 X-126.73532 Y36.21823
G01 X-126.78402 Y36.26692
G01 X-126.82537 Y36.31254
G01 X-126.87121 Y36.36265
G01 X-126.89082 Y36.38213
G01 X-126.92514 Y36.41863
G01 X-126.94000 Y36.43557
G01 X-127.06161 Y36.54837
G01 X-127.08742 Y36.56809
G01 X-127.14043 Y36.61137
G01 X-127.15646 Y36.62534
G01 X-127.16166 Y36.62958
G01 X-127.16187 Y36.62976
G01 X-127.20047 Y36.75701
G01 X-127.21691 Y36.83971
G01 X-127.21691 Y38.07072
G01 X-127.20047 Y38.15363
G01 X-127.15493 Y38.30369
G01 X-127.11818 Y38.39244
G01 X-127.04426 Y38.53074
G01 X-126.99090 Y38.61063
G01 X-126.93692 Y38.67639
G01 X-126.93692 Y39.23397
G01 X-126.98694 Y39.29490
G01 X-127.00588 Y39.31802
G01 X-127.05925 Y39.39787
G01 X-127.13319 Y39.53618
G01 X-127.16994 Y39.62492
G01 X-127.21546 Y39.77501
G01 X-127.23192 Y39.85777
G01 X-127.23192 Y41.08880
G01 X-127.21546 Y41.17163
G01 X-127.17759 Y41.29647
G01 X-127.15214 Y41.31639
G01 X-127.07706 Y41.38045
G01 X-127.06547 Y41.39048
G01 X-127.00380 Y41.44496
G01 X-126.95422 Y41.49259
G01 X-126.90413 Y41.54511
G01 X-126.89174 Y41.55845
G01 X-126.86039 Y41.59304
G01 X-126.84038 Y41.61608
G01 X-126.79903 Y41.66173
G01 X-126.75033 Y41.71042
G01 X-126.70891 Y41.74796
G01 X-126.62897 Y41.80973
G01 X-126.57243 Y41.84910
G01 X-126.56337 Y41.85479
G01 X-126.43380 Y41.92243
G01 X-126.40279 Y41.93767
G01 X-126.37010 Y41.94882
G01 X-126.23065 Y41.99261
G01 X-126.22021 Y41.99500
G01 X-126.15237 Y42.00711
G01 X-126.05217 Y42.01999
G01 X-125.99634 Y42.02274
G01 X-125.92753 Y42.02274
G01 X-125.87167 Y42.01999
G01 X-125.77147 Y42.00711
G01 X-125.70363 Y41.99500
G01 X-125.69319 Y41.99261
G01 X-125.55377 Y41.94882
G01 X-125.52108 Y41.93767
G01 X-125.49009 Y41.92243
G01 X-125.36047 Y41.85479
G01 X-125.35143 Y41.84913
G01 X-125.29484 Y41.80971
G01 X-125.21490 Y41.74793
G01 X-125.17348 Y41.71039
G01 X-125.12484 Y41.66175
G01 X-125.08346 Y41.61608
G01 X-125.03766 Y41.56602
G01 X-125.01803 Y41.54651
G01 X-124.98376 Y41.51006
G01 X-124.96886 Y41.49307
G01 X-124.84724 Y41.38027
G01 X-124.82141 Y41.36056
G01 X-124.76845 Y41.31728
G01 X-124.75237 Y41.30328
G01 X-124.74701 Y41.29891
G01 X-124.66776 Y41.29350
G01 X-124.63731 Y41.29670
G01 X-124.61214 Y41.31639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.74701 Y41.29891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.74701 Y41.29891
G01 X-124.70840 Y41.17163
G01 X-124.69194 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.23192 Y41.08880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.23192 Y41.08880
G01 X-127.24840 Y41.17163
G01 X-127.28701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.15214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.15214 Y41.31639
G01 X-127.17731 Y41.29670
G01 X-127.20776 Y41.29350
G01 X-127.28701 Y41.29891
G01 X-127.29237 Y41.30328
G01 X-127.30845 Y41.31728
G01 X-127.36141 Y41.36056
G01 X-127.38724 Y41.38027
G01 X-127.50886 Y41.49307
G01 X-127.52376 Y41.51006
G01 X-127.55803 Y41.54651
G01 X-127.57766 Y41.56602
G01 X-127.62346 Y41.61608
G01 X-127.66484 Y41.66175
G01 X-127.71348 Y41.71039
G01 X-127.75490 Y41.74793
G01 X-127.83484 Y41.80971
G01 X-127.89143 Y41.84913
G01 X-127.90047 Y41.85479
G01 X-128.03009 Y41.92243
G01 X-128.06108 Y41.93767
G01 X-128.09377 Y41.94882
G01 X-128.23319 Y41.99261
G01 X-128.24363 Y41.99500
G01 X-128.31147 Y42.00711
G01 X-128.41167 Y42.01999
G01 X-128.46753 Y42.02274
G01 X-128.53634 Y42.02274
G01 X-128.59217 Y42.01999
G01 X-128.69237 Y42.00711
G01 X-128.76021 Y41.99500
G01 X-128.77065 Y41.99261
G01 X-128.91010 Y41.94882
G01 X-128.94279 Y41.93767
G01 X-128.97380 Y41.92243
G01 X-129.10337 Y41.85479
G01 X-129.11243 Y41.84910
G01 X-129.16897 Y41.80973
G01 X-129.24891 Y41.74796
G01 X-129.29033 Y41.71042
G01 X-129.33903 Y41.66173
G01 X-129.38038 Y41.61608
G01 X-129.40039 Y41.59304
G01 X-129.43174 Y41.55845
G01 X-129.44413 Y41.54511
G01 X-129.49422 Y41.49259
G01 X-129.54380 Y41.44496
G01 X-129.60547 Y41.39048
G01 X-129.61706 Y41.38045
G01 X-129.69214 Y41.31639
G01 X-129.71759 Y41.29647
G01 X-129.75546 Y41.17163
G01 X-129.77194 Y41.08880
G01 X-129.77194 Y39.85777
G01 X-129.78840 Y39.77501
G01 X-129.83392 Y39.62492
G01 X-129.87070 Y39.53618
G01 X-129.94461 Y39.39787
G01 X-129.99798 Y39.31802
G01 X-130.03692 Y39.27057
G01 X-130.03692 Y39.10669
G01 X-129.95470 Y39.06272
G01 X-129.88045 Y39.00179
G01 X-129.81952 Y38.92754
G01 X-129.77423 Y38.84283
G01 X-129.74634 Y38.75091
G01 X-129.73694 Y38.65530
G01 X-129.73692 Y38.16534
G01 X-129.73872 Y38.15310
G01 X-129.74809 Y38.05833
G01 X-129.75579 Y37.90148
G01 X-129.75693 Y37.85533
G01 X-129.75693 Y37.05531
G01 X-129.75579 Y37.00916
G01 X-129.74809 Y36.85234
G01 X-129.73872 Y36.75759
G01 X-129.73689 Y36.74525
G01 X-129.73692 Y36.36494
G01 X-129.73694 Y36.36494
G01 X-129.81271 Y36.25531
G01 X-129.83511 Y36.21409
G01 X-129.87774 Y36.14416
G01 X-129.93966 Y36.05346
G01 X-129.94687 Y36.04312
G01 X-129.94982 Y36.03898
G01 X-130.01015 Y35.97860
G01 X-130.08264 Y35.93476
G01 X-130.16877 Y35.90829
G01 X-130.18627 Y35.90624
G01 X-130.22693 Y35.90507
G01 X-131.82693 Y35.90507
G01 X-131.86757 Y35.90624
G01 X-131.88507 Y35.90829
G01 X-131.97120 Y35.93476
G01 X-132.04372 Y35.97860
G01 X-132.10364 Y36.03852
G01 X-132.14748 Y36.11104
G01 X-132.17395 Y36.19717
G01 X-132.17600 Y36.21467
G01 X-132.17717 Y36.25531
G01 X-132.17717 Y38.34560
G01 X-132.18324 Y38.43786
G01 X-132.19340 Y38.51497
G01 X-132.22556 Y38.65530
G01 X-132.24687 Y38.72063
G01 X-132.27059 Y38.80598
G01 X-132.27867 Y38.84062
G01 X-132.27933 Y38.84342
G01 X-132.23435 Y38.92754
G01 X-132.17341 Y39.00179
G01 X-132.09917 Y39.06272
G01 X-132.01692 Y39.10669
G01 X-132.01692 Y39.23397
G01 X-132.06694 Y39.29490
G01 X-132.08588 Y39.31802
G01 X-132.13925 Y39.39787
G01 X-132.21319 Y39.53618
G01 X-132.24994 Y39.62492
G01 X-132.29546 Y39.77501
G01 X-132.31194 Y39.85777
G01 X-132.31194 Y41.08880
G01 X-132.32840 Y41.17163
G01 X-132.37392 Y41.32170
G01 X-132.41070 Y41.41044
G01 X-132.48461 Y41.54875
G01 X-132.50732 Y41.58273
G01 X-132.53798 Y41.62863
G01 X-132.63747 Y41.74986
G01 X-132.70539 Y41.81778
G01 X-132.74192 Y41.84775
G01 X-132.74192 Y41.87999
G01 X-132.71634 Y41.86035
G01 X-132.57222 Y41.71621
G01 X-132.57041 Y41.71801
G01 X-132.51636 Y41.66404
G01 X-132.45517 Y41.61710
G01 X-132.38319 Y41.57125
G01 X-132.30432 Y41.53859
G01 X-132.22099 Y41.52009
G01 X-132.15893 Y41.51192
G01 X-132.14319 Y41.51999
G01 X-132.11428 Y41.53539
G01 X-132.02929 Y41.58217
G01 X-131.93836 Y41.63996
G01 X-131.89297 Y41.67318
G01 X-131.87715 Y41.68446
G01 X-131.83374 Y41.71453
G01 X-131.80407 Y41.73625
G01 X-131.73547 Y41.78923
G01 X-131.70895 Y41.80971
G01 X-131.65243 Y41.84910
G01 X-131.64337 Y41.85479
G01 X-131.51380 Y41.92243
G01 X-131.48279 Y41.93767
G01 X-131.45010 Y41.94882
G01 X-131.31065 Y41.99261
G01 X-131.30021 Y41.99500
G01 X-131.23237 Y42.00711
G01 X-131.13217 Y42.01999
G01 X-131.07634 Y42.02274
G01 X-131.00753 Y42.02274
G01 X-130.95167 Y42.01999
G01 X-130.85147 Y42.00711
G01 X-130.78363 Y41.99500
G01 X-130.77319 Y41.99261
G01 X-130.63377 Y41.94882
G01 X-130.60108 Y41.93767
G01 X-130.57009 Y41.92243
G01 X-130.44047 Y41.85479
G01 X-130.43143 Y41.84913
G01 X-130.37484 Y41.80971
G01 X-130.29490 Y41.74793
G01 X-130.25348 Y41.71039
G01 X-130.20484 Y41.66175
G01 X-130.16346 Y41.61608
G01 X-130.11766 Y41.56602
G01 X-130.09803 Y41.54651
G01 X-130.06376 Y41.51006
G01 X-130.04886 Y41.49307
G01 X-129.92724 Y41.38027
G01 X-129.90141 Y41.36056
G01 X-129.84845 Y41.31728
G01 X-129.83237 Y41.30328
G01 X-129.82701 Y41.29891
G01 X-129.78840 Y41.17163
G01 X-129.77194 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.69214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.69214 Y41.31639
G01 X-129.71731 Y41.29670
G01 X-129.74776 Y41.29350
G01 X-129.82701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.77194 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.77194 Y39.85777
G01 X-129.75546 Y39.77501
G01 X-129.70994 Y39.62492
G01 X-129.67319 Y39.53618
G01 X-129.59925 Y39.39787
G01 X-129.54588 Y39.31802
G01 X-129.47692 Y39.23397
G01 X-129.47692 Y38.67639
G01 X-129.53090 Y38.61063
G01 X-129.58426 Y38.53074
G01 X-129.65818 Y38.39244
G01 X-129.69493 Y38.30369
G01 X-129.73692 Y38.16534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.23192 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.23192 Y39.85777
G01 X-127.24840 Y39.77501
G01 X-127.29392 Y39.62492
G01 X-127.33070 Y39.53618
G01 X-127.40461 Y39.39787
G01 X-127.45798 Y39.31802
G01 X-127.49692 Y39.27057
G01 X-127.49692 Y38.67634
G01 X-127.46192 Y38.63369
G01 X-127.44299 Y38.61063
G01 X-127.38963 Y38.53074
G01 X-127.31569 Y38.39244
G01 X-127.27893 Y38.30369
G01 X-127.23342 Y38.15363
G01 X-127.21691 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.21691 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.21691 Y36.83971
G01 X-127.23342 Y36.75701
G01 X-127.27129 Y36.63214
G01 X-127.27154 Y36.63194
G01 X-127.29669 Y36.61228
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.16166 Y36.62958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.16166 Y36.62958
G01 X-127.24104 Y36.63514
G01 X-127.27154 Y36.63194
G01 X-127.27157 Y36.63194
G01 X-127.29669 Y36.61228
G01 X-127.37177 Y36.54820
G01 X-127.38330 Y36.53819
G01 X-127.44502 Y36.48373
G01 X-127.49463 Y36.43606
G01 X-127.54472 Y36.38353
G01 X-127.55712 Y36.37019
G01 X-127.58846 Y36.33560
G01 X-127.60847 Y36.31256
G01 X-127.64983 Y36.26692
G01 X-127.69852 Y36.21823
G01 X-127.73994 Y36.18068
G01 X-127.81988 Y36.11891
G01 X-127.87644 Y36.07952
G01 X-127.88549 Y36.07385
G01 X-128.01508 Y36.00621
G01 X-128.04607 Y35.99100
G01 X-128.07870 Y35.97985
G01 X-128.21820 Y35.93603
G01 X-128.22859 Y35.93364
G01 X-128.29648 Y35.92153
G01 X-128.39669 Y35.90865
G01 X-128.45252 Y35.90591
G01 X-128.52132 Y35.90591
G01 X-128.57715 Y35.90865
G01 X-128.67738 Y35.92153
G01 X-128.74530 Y35.93364
G01 X-128.75566 Y35.93603
G01 X-128.89516 Y35.97985
G01 X-128.92778 Y35.99100
G01 X-128.95876 Y36.00621
G01 X-129.08835 Y36.07385
G01 X-129.09740 Y36.07952
G01 X-129.15396 Y36.11891
G01 X-129.23108 Y36.17850
G01 X-129.27969 Y36.21292
G01 X-129.30875 Y36.23171
G01 X-129.34047 Y36.25340
G01 X-129.37380 Y36.27746
G01 X-129.47944 Y36.34223
G01 X-129.56826 Y36.38838
G01 X-129.58668 Y36.39773
G01 X-129.59635 Y36.40255
G01 X-129.65818 Y36.51817
G01 X-129.69493 Y36.60692
G01 X-129.73689 Y36.74525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.59635 Y36.40255 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.59635 Y36.40255
G01 X-129.66382 Y36.39186
G01 X-129.72968 Y36.37545
G01 X-129.73692 Y36.36494
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.62230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.62230 Y30.65867
G01 X-124.65275 Y30.65550
G01 X-124.73203 Y30.66091
G01 X-124.73739 Y30.66530
G01 X-124.75351 Y30.67935
G01 X-124.80642 Y30.72255
G01 X-124.83215 Y30.74219
G01 X-124.95379 Y30.85504
G01 X-124.96870 Y30.87201
G01 X-125.00304 Y30.90856
G01 X-125.02260 Y30.92799
G01 X-125.06860 Y30.97826
G01 X-125.10985 Y31.02377
G01 X-125.15849 Y31.07241
G01 X-125.19992 Y31.10996
G01 X-125.27988 Y31.17173
G01 X-125.33642 Y31.21112
G01 X-125.34549 Y31.21679
G01 X-125.47505 Y31.28443
G01 X-125.50601 Y31.29964
G01 X-125.53251 Y31.30881
G01 X-125.53875 Y31.31082
G01 X-125.67823 Y31.35461
G01 X-125.68864 Y31.35700
G01 X-125.75648 Y31.36911
G01 X-125.85669 Y31.38199
G01 X-125.91252 Y31.38473
G01 X-125.98132 Y31.38473
G01 X-126.03715 Y31.38199
G01 X-126.13738 Y31.36911
G01 X-126.20523 Y31.35700
G01 X-126.21566 Y31.35461
G01 X-126.35509 Y31.31082
G01 X-126.38780 Y31.29964
G01 X-126.41879 Y31.28443
G01 X-126.54835 Y31.21679
G01 X-126.55742 Y31.21112
G01 X-126.61396 Y31.17173
G01 X-126.69392 Y31.10996
G01 X-126.73535 Y31.07241
G01 X-126.78399 Y31.02377
G01 X-126.82524 Y30.97826
G01 X-126.84548 Y30.95494
G01 X-126.87683 Y30.92037
G01 X-126.88910 Y30.90716
G01 X-126.93921 Y30.85463
G01 X-126.98874 Y30.80704
G01 X-127.05044 Y30.75255
G01 X-127.06204 Y30.74247
G01 X-127.13723 Y30.67831
G01 X-127.16230 Y30.65870
G01 X-127.16230 Y30.65867
G01 X-127.16260 Y30.65847
G01 X-127.20047 Y30.53363
G01 X-127.21691 Y30.45072
G01 X-127.21691 Y29.21971
G01 X-127.20047 Y29.13701
G01 X-127.15493 Y28.98692
G01 X-127.11818 Y28.89817
G01 X-127.04426 Y28.75987
G01 X-126.99090 Y28.68001
G01 X-126.93692 Y28.61425
G01 X-126.93692 Y28.02538
G01 X-126.99090 Y27.95962
G01 X-127.04426 Y27.87976
G01 X-127.11818 Y27.74143
G01 X-127.15493 Y27.65271
G01 X-127.20047 Y27.50262
G01 X-127.21691 Y27.41974
G01 X-127.21691 Y26.18876
G01 X-127.20047 Y26.10600
G01 X-127.15493 Y25.95591
G01 X-127.11818 Y25.86719
G01 X-127.04426 Y25.72886
G01 X-126.99090 Y25.64903
G01 X-126.97192 Y25.62589
G01 X-126.89141 Y25.52777
G01 X-126.82349 Y25.45988
G01 X-126.70225 Y25.36036
G01 X-126.62237 Y25.30700
G01 X-126.48407 Y25.23306
G01 X-126.39532 Y25.19633
G01 X-126.24526 Y25.15081
G01 X-126.15105 Y25.13204
G01 X-125.99496 Y25.11667
G01 X-125.89890 Y25.11667
G01 X-125.74284 Y25.13204
G01 X-125.64864 Y25.15081
G01 X-125.60815 Y25.16308
G01 X-125.49855 Y25.19633
G01 X-125.40980 Y25.23306
G01 X-125.27150 Y25.30700
G01 X-125.19164 Y25.36036
G01 X-125.07040 Y25.45988
G01 X-125.00248 Y25.52777
G01 X-124.90299 Y25.64903
G01 X-124.84963 Y25.72886
G01 X-124.77569 Y25.86719
G01 X-124.73893 Y25.95591
G01 X-124.69342 Y26.10600
G01 X-124.67693 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.67693 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.67693 Y27.41974
G01 X-124.69342 Y27.50262
G01 X-124.73893 Y27.65271
G01 X-124.77569 Y27.74143
G01 X-124.84963 Y27.87976
G01 X-124.90299 Y27.95962
G01 X-124.92192 Y27.98268
G01 X-124.95692 Y28.02533
G01 X-124.95692 Y28.61428
G01 X-124.90299 Y28.68001
G01 X-124.84963 Y28.75987
G01 X-124.77569 Y28.89817
G01 X-124.73893 Y28.98692
G01 X-124.69342 Y29.13701
G01 X-124.67693 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.67693 Y30.45072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.67693 Y30.45072
G01 X-124.69342 Y30.53363
G01 X-124.73203 Y30.66091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.16230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.16230 Y30.65867
G01 X-127.19275 Y30.65550
G01 X-127.27203 Y30.66091
G01 X-127.27738 Y30.66530
G01 X-127.29351 Y30.67935
G01 X-127.34642 Y30.72255
G01 X-127.37215 Y30.74219
G01 X-127.49379 Y30.85504
G01 X-127.50870 Y30.87201
G01 X-127.54304 Y30.90856
G01 X-127.56260 Y30.92799
G01 X-127.60860 Y30.97826
G01 X-127.64985 Y31.02377
G01 X-127.69849 Y31.07241
G01 X-127.73992 Y31.10996
G01 X-127.81988 Y31.17173
G01 X-127.87642 Y31.21112
G01 X-127.88549 Y31.21679
G01 X-128.01505 Y31.28443
G01 X-128.04601 Y31.29964
G01 X-128.07251 Y31.30881
G01 X-128.07876 Y31.31082
G01 X-128.21823 Y31.35461
G01 X-128.22864 Y31.35700
G01 X-128.29648 Y31.36911
G01 X-128.39669 Y31.38199
G01 X-128.45252 Y31.38473
G01 X-128.52132 Y31.38473
G01 X-128.57715 Y31.38199
G01 X-128.67738 Y31.36911
G01 X-128.74523 Y31.35700
G01 X-128.75566 Y31.35461
G01 X-128.89509 Y31.31082
G01 X-128.92780 Y31.29964
G01 X-128.95879 Y31.28443
G01 X-129.08835 Y31.21679
G01 X-129.09742 Y31.21112
G01 X-129.15396 Y31.17173
G01 X-129.23392 Y31.10996
G01 X-129.27535 Y31.07241
G01 X-129.32399 Y31.02377
G01 X-129.36524 Y30.97826
G01 X-129.38548 Y30.95494
G01 X-129.41683 Y30.92037
G01 X-129.42910 Y30.90716
G01 X-129.47921 Y30.85463
G01 X-129.52874 Y30.80704
G01 X-129.59044 Y30.75255
G01 X-129.60204 Y30.74247
G01 X-129.67723 Y30.67831
G01 X-129.70230 Y30.65870
G01 X-129.70230 Y30.65867
G01 X-129.70260 Y30.65847
G01 X-129.74047 Y30.53363
G01 X-129.75693 Y30.45072
G01 X-129.75693 Y29.21971
G01 X-129.74047 Y29.13701
G01 X-129.69493 Y28.98692
G01 X-129.65818 Y28.89817
G01 X-129.58426 Y28.75987
G01 X-129.53090 Y28.68001
G01 X-129.50512 Y28.64862
G01 X-129.47692 Y28.61425
G01 X-129.47692 Y28.02538
G01 X-129.53090 Y27.95962
G01 X-129.58426 Y27.87976
G01 X-129.65818 Y27.74143
G01 X-129.69493 Y27.65271
G01 X-129.73692 Y27.51433
G01 X-129.73872 Y27.50206
G01 X-129.74809 Y27.40732
G01 X-129.75579 Y27.25050
G01 X-129.75693 Y27.20432
G01 X-129.75693 Y26.40430
G01 X-129.75579 Y26.35815
G01 X-129.74809 Y26.20135
G01 X-129.73872 Y26.10661
G01 X-129.73689 Y26.09427
G01 X-129.73694 Y25.60433
G01 X-129.74634 Y25.50872
G01 X-129.77423 Y25.41680
G01 X-129.81952 Y25.33209
G01 X-129.88045 Y25.25782
G01 X-129.91924 Y25.22602
G01 X-129.95470 Y25.19689
G01 X-130.03943 Y25.15162
G01 X-130.13135 Y25.12373
G01 X-130.22693 Y25.11434
G01 X-131.82693 Y25.11434
G01 X-131.92254 Y25.12373
G01 X-132.01446 Y25.15162
G01 X-132.09917 Y25.19689
G01 X-132.17341 Y25.25782
G01 X-132.23435 Y25.33209
G01 X-132.27964 Y25.41680
G01 X-132.30752 Y25.50872
G01 X-132.31695 Y25.60433
G01 X-132.31695 Y28.00432
G01 X-132.30752 Y28.09990
G01 X-132.27964 Y28.19185
G01 X-132.23435 Y28.27653
G01 X-132.17341 Y28.35083
G01 X-132.09917 Y28.41174
G01 X-132.01692 Y28.45573
G01 X-132.01692 Y28.61425
G01 X-132.07090 Y28.68001
G01 X-132.12426 Y28.75987
G01 X-132.19818 Y28.89817
G01 X-132.23493 Y28.98692
G01 X-132.28047 Y29.13701
G01 X-132.29919 Y29.23124
G01 X-132.31459 Y29.38728
G01 X-132.31695 Y29.43531
G01 X-132.31695 Y30.22245
G01 X-132.30780 Y30.23531
G01 X-132.27882 Y30.27981
G01 X-132.21677 Y30.39027
G01 X-132.19825 Y30.42946
G01 X-132.18108 Y30.46368
G01 X-132.16285 Y30.49794
G01 X-132.12337 Y30.58550
G01 X-132.11248 Y30.61473
G01 X-132.10245 Y30.64351
G01 X-132.10044 Y30.64971
G01 X-132.09127 Y30.67617
G01 X-132.07603 Y30.70716
G01 X-132.00839 Y30.83678
G01 X-132.00272 Y30.84582
G01 X-131.96330 Y30.90241
G01 X-131.90153 Y30.98235
G01 X-131.86399 Y31.02377
G01 X-131.81535 Y31.07241
G01 X-131.77392 Y31.10996
G01 X-131.69396 Y31.17173
G01 X-131.63742 Y31.21112
G01 X-131.62835 Y31.21679
G01 X-131.49879 Y31.28443
G01 X-131.46780 Y31.29964
G01 X-131.43509 Y31.31082
G01 X-131.29566 Y31.35461
G01 X-131.28523 Y31.35700
G01 X-131.21738 Y31.36911
G01 X-131.11715 Y31.38199
G01 X-131.06132 Y31.38473
G01 X-130.99252 Y31.38473
G01 X-130.93669 Y31.38199
G01 X-130.83648 Y31.36911
G01 X-130.76864 Y31.35700
G01 X-130.75823 Y31.35461
G01 X-130.61875 Y31.31082
G01 X-130.61251 Y31.30881
G01 X-130.58601 Y31.29964
G01 X-130.55505 Y31.28443
G01 X-130.42549 Y31.21679
G01 X-130.41642 Y31.21112
G01 X-130.35988 Y31.17173
G01 X-130.27992 Y31.10996
G01 X-130.23849 Y31.07241
G01 X-130.18985 Y31.02377
G01 X-130.14860 Y30.97826
G01 X-130.10260 Y30.92799
G01 X-130.08304 Y30.90856
G01 X-130.04870 Y30.87201
G01 X-130.03379 Y30.85504
G01 X-129.91215 Y30.74219
G01 X-129.88642 Y30.72255
G01 X-129.83351 Y30.67935
G01 X-129.81738 Y30.66530
G01 X-129.81203 Y30.66091
G01 X-129.77342 Y30.53363
G01 X-129.75693 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.70230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.70230 Y30.65867
G01 X-129.73275 Y30.65550
G01 X-129.81203 Y30.66091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.30780 Y30.23531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.30780 Y30.23531
G01 X-132.31626 Y30.22342
G01 X-132.37524 Y30.20196
G01 X-132.44974 Y30.18202
G01 X-132.53376 Y30.16721
G01 X-132.61908 Y30.16721
G01 X-132.70310 Y30.18202
G01 X-132.77760 Y30.20196
G01 X-132.85794 Y30.23119
G01 X-132.92050 Y30.26731
G01 X-132.93592 Y30.29340
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.73692 Y27.51433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.73692 Y27.51433
G01 X-129.73694 Y28.00432
G01 X-129.74634 Y28.09990
G01 X-129.77423 Y28.19185
G01 X-129.81952 Y28.27653
G01 X-129.88045 Y28.35083
G01 X-129.93847 Y28.39843
G01 X-129.95470 Y28.41174
G01 X-130.03692 Y28.45568
G01 X-130.03692 Y28.61428
G01 X-129.98299 Y28.68001
G01 X-129.92963 Y28.75987
G01 X-129.85569 Y28.89817
G01 X-129.81893 Y28.98692
G01 X-129.77342 Y29.13701
G01 X-129.75693 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.27203 Y30.66091 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.27203 Y30.66091
G01 X-127.23342 Y30.53363
G01 X-127.21691 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.21691 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.21691 Y29.21971
G01 X-127.23342 Y29.13701
G01 X-127.27893 Y28.98692
G01 X-127.31569 Y28.89817
G01 X-127.38963 Y28.75987
G01 X-127.44299 Y28.68001
G01 X-127.49692 Y28.61428
G01 X-127.49692 Y28.02533
G01 X-127.46192 Y27.98268
G01 X-127.44299 Y27.95962
G01 X-127.38963 Y27.87976
G01 X-127.31569 Y27.74143
G01 X-127.27893 Y27.65271
G01 X-127.23342 Y27.50262
G01 X-127.21691 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.21691 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.21691 Y26.18876
G01 X-127.23342 Y26.10600
G01 X-127.27893 Y25.95591
G01 X-127.31569 Y25.86719
G01 X-127.38963 Y25.72886
G01 X-127.44299 Y25.64903
G01 X-127.54248 Y25.52777
G01 X-127.61040 Y25.45988
G01 X-127.73164 Y25.36036
G01 X-127.81150 Y25.30700
G01 X-127.94980 Y25.23306
G01 X-128.03855 Y25.19633
G01 X-128.14815 Y25.16308
G01 X-128.18864 Y25.15081
G01 X-128.28284 Y25.13204
G01 X-128.43890 Y25.11667
G01 X-128.53496 Y25.11667
G01 X-128.69105 Y25.13204
G01 X-128.78526 Y25.15081
G01 X-128.93532 Y25.19633
G01 X-129.02407 Y25.23306
G01 X-129.16237 Y25.30700
G01 X-129.24225 Y25.36036
G01 X-129.33270 Y25.43458
G01 X-129.36349 Y25.45988
G01 X-129.43141 Y25.52777
G01 X-129.53090 Y25.64903
G01 X-129.58426 Y25.72886
G01 X-129.65818 Y25.86719
G01 X-129.69493 Y25.95591
G01 X-129.73689 Y26.09427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.70742 Y23.01338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.70742 Y23.01338
G01 X-132.72091 Y22.98676
G01 X-132.72604 Y22.97627
G01 X-132.77768 Y22.88467
G01 X-132.79876 Y22.85216
G01 X-132.83308 Y22.80357
G01 X-132.88045 Y22.74185
G01 X-132.94138 Y22.67230
G01 X-134.52713 Y21.08656
G01 X-134.55088 Y21.06161
G01 X-134.57262 Y21.03764
G01 X-134.61278 Y20.98564
G01 X-134.65161 Y20.93002
G01 X-134.65210 Y20.92908
G01 X-134.69746 Y20.84218
G01 X-134.71265 Y20.81122
G01 X-134.72380 Y20.77858
G01 X-134.75316 Y20.68506
G01 X-134.75349 Y20.68404
G01 X-134.76536 Y20.61732
G01 X-134.76650 Y20.60838
G01 X-134.77369 Y20.55245
G01 X-134.77374 Y20.55196
G01 X-134.77534 Y20.51981
G01 X-134.77618 Y20.48534
G01 X-134.77618 Y15.83729
G01 X-134.77767 Y15.79137
G01 X-134.78024 Y15.75246
G01 X-134.79678 Y15.63904
G01 X-134.81410 Y15.61555
G01 X-134.86147 Y15.55383
G01 X-134.92240 Y15.48428
G01 X-137.08389 Y13.32279
G01 X-137.11747 Y13.29135
G01 X-137.14678 Y13.26567
G01 X-137.23863 Y13.19719
G01 X-137.26756 Y13.19280
G01 X-137.34467 Y13.18266
G01 X-137.43693 Y13.17657
G01 X-137.96606 Y13.17657
G01 X-138.01198 Y13.17809
G01 X-138.05090 Y13.18063
G01 X-138.19362 Y13.20443
G01 X-138.23837 Y13.21642
G01 X-138.25984 Y13.24400
G01 X-138.32174 Y13.32018
G01 X-138.40111 Y13.40306
G01 X-138.47365 Y13.44690
G01 X-138.55973 Y13.47336
G01 X-138.57724 Y13.47540
G01 X-138.61793 Y13.47656
G01 X-140.21792 Y13.47656
G01 X-140.25864 Y13.47540
G01 X-140.27609 Y13.47336
G01 X-140.36225 Y13.44687
G01 X-140.40078 Y13.42508
G01 X-140.43471 Y13.40306
G01 X-140.49463 Y13.34314
G01 X-140.53850 Y13.27060
G01 X-140.56496 Y13.18449
G01 X-140.56700 Y13.16704
G01 X-140.56819 Y13.12632
G01 X-140.56819 Y11.52630
G01 X-140.56700 Y11.48561
G01 X-140.56496 Y11.46816
G01 X-140.53850 Y11.38205
G01 X-140.49463 Y11.30951
G01 X-140.43474 Y11.24962
G01 X-140.36219 Y11.20575
G01 X-140.27609 Y11.17929
G01 X-140.25861 Y11.17725
G01 X-140.21792 Y11.17606
G01 X-138.61793 Y11.17606
G01 X-138.57721 Y11.17725
G01 X-138.55976 Y11.17929
G01 X-138.47365 Y11.20575
G01 X-138.40111 Y11.24959
G01 X-138.32174 Y11.33247
G01 X-138.29171 Y11.36941
G01 X-138.26718 Y11.40131
G01 X-138.24013 Y11.43844
G01 X-138.13540 Y11.45986
G01 X-138.05829 Y11.46999
G01 X-137.96606 Y11.47606
G01 X-136.87792 Y11.47606
G01 X-136.84346 Y11.47692
G01 X-136.80348 Y11.47888
G01 X-136.75684 Y11.47964
G01 X-136.74521 Y11.47946
G01 X-136.71763 Y11.47954
G01 X-136.67259 Y11.48051
G01 X-136.56881 Y11.47603
G01 X-136.56035 Y11.47515
G01 X-136.47582 Y11.47009
G01 X-136.47422 Y11.47007
G01 X-136.39497 Y11.46463
G01 X-136.36916 Y11.47845
G01 X-136.28930 Y11.53181
G01 X-136.21354 Y11.59399
G01 X-136.17790 Y11.62628
G01 X-133.22589 Y14.57829
G01 X-133.19360 Y14.61393
G01 X-133.13142 Y14.68969
G01 X-133.07806 Y14.76955
G01 X-133.03183 Y14.85599
G01 X-132.99508 Y14.94474
G01 X-132.99096 Y14.95835
G01 X-132.96663 Y15.03854
G01 X-132.94788 Y15.13275
G01 X-132.93828 Y15.23031
G01 X-132.93592 Y15.27831
G01 X-132.93592 Y20.07526
G01 X-131.76887 Y21.24231
G01 X-119.77100 Y21.24231
G01 X-119.31692 Y20.78826
G01 X-119.31692 Y20.40538
G01 X-119.37090 Y20.33962
G01 X-119.42426 Y20.25976
G01 X-119.49818 Y20.12143
G01 X-119.53493 Y20.03271
G01 X-119.58047 Y19.88262
G01 X-119.59693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-118.42683 Y22.69831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-118.42683 Y22.69831
G01 X-117.62688 Y21.89837
G01 X-117.59460 Y21.86276
G01 X-117.53242 Y21.78699
G01 X-117.47906 Y21.70710
G01 X-117.43285 Y21.62067
G01 X-117.39607 Y21.53192
G01 X-117.36763 Y21.43812
G01 X-117.34888 Y21.34391
G01 X-117.33928 Y21.24635
G01 X-117.33692 Y21.19832
G01 X-117.33692 Y20.40533
G01 X-117.30192 Y20.36268
G01 X-117.28299 Y20.33962
G01 X-117.22963 Y20.25976
G01 X-117.15569 Y20.12143
G01 X-117.11893 Y20.03271
G01 X-117.07342 Y19.88262
G01 X-117.05693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.10692 Y18.37544 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.10692 Y18.37544
G01 X-117.11893 Y18.33591
G01 X-117.12694 Y18.31664
G01 X-117.12694 Y14.42807
G01 X-117.11693 Y14.40394
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.02191 Y13.00316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.02191 Y13.00316
G01 X-117.00583 Y12.97309
G01 X-116.95246 Y12.89323
G01 X-116.84675 Y12.76442
G01 X-116.77883 Y12.69650
G01 X-116.65714 Y12.59663
G01 X-116.00192 Y11.94141
G01 X-116.00189 Y9.86166
G01 X-116.08269 Y9.89511
G01 X-116.22338 Y9.93781
G01 X-116.31759 Y9.95653
G01 X-116.46392 Y9.97096
G01 X-116.55996 Y9.97096
G01 X-116.70629 Y9.95653
G01 X-116.80049 Y9.93781
G01 X-116.94119 Y9.89511
G01 X-117.02193 Y9.86169
G01 X-117.02737 Y9.85356
G01 X-117.11548 Y9.70652
G01 X-117.15500 Y9.63283
G01 X-117.22455 Y9.48579
G01 X-117.24703 Y9.43169
G01 X-117.29963 Y9.28465
G01 X-117.31192 Y9.24426
G01 X-117.34873 Y9.09727
G01 X-117.35498 Y9.06591
G01 X-117.37680 Y8.91886
G01 X-117.37939 Y8.89263
G01 X-117.38662 Y8.74561
G01 X-117.38693 Y8.73332
G01 X-117.38693 Y7.23332
G01 X-117.38662 Y7.22105
G01 X-117.37939 Y7.07404
G01 X-117.37680 Y7.04777
G01 X-117.35498 Y6.90073
G01 X-117.34873 Y6.86941
G01 X-117.31192 Y6.72240
G01 X-117.29963 Y6.68196
G01 X-117.24703 Y6.53495
G01 X-117.22457 Y6.48090
G01 X-117.15503 Y6.33386
G01 X-117.11545 Y6.26004
G01 X-117.09943 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.75190 Y4.98971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.75190 Y4.98971
G01 X-117.99752 Y4.74412
G01 X-118.21454 Y4.65603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.75193 Y4.63691 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.75193 Y4.63691
G01 X-117.75190 Y4.98971
G01 X-117.65101 Y5.23335
G01 X-117.63476 Y5.27003
G01 X-117.56798 Y5.41118
G01 X-117.53781 Y5.46774
G01 X-117.52226 Y5.49370
G01 X-117.50773 Y5.51933
G01 X-117.46498 Y5.59929
G01 X-117.43773 Y5.64480
G01 X-117.43458 Y5.64950
G01 X-117.40811 Y5.69367
G01 X-117.36572 Y5.77300
G01 X-117.33925 Y5.81717
G01 X-117.33610 Y5.82187
G01 X-117.30885 Y5.86738
G01 X-117.26610 Y5.94734
G01 X-117.23522 Y5.99880
G01 X-117.20156 Y6.05507
G01 X-117.15802 Y6.13652
G01 X-117.12348 Y6.19510
G01 X-117.11573 Y6.20711
G01 X-117.09943 Y6.23332
G01 X-116.23430 Y6.23332
G01 X-116.14751 Y6.28537
G01 X-116.10410 Y6.31432
G01 X-115.98472 Y6.40287
G01 X-115.94932 Y6.43190
G01 X-115.84022 Y6.53078
G01 X-115.80936 Y6.56164
G01 X-115.73979 Y6.63840
G01 X-115.72422 Y6.68196
G01 X-115.71193 Y6.72237
G01 X-115.67510 Y6.86941
G01 X-115.66885 Y6.90073
G01 X-115.64703 Y7.04777
G01 X-115.64444 Y7.07401
G01 X-115.63723 Y7.22105
G01 X-115.63692 Y7.23332
G01 X-115.63692 Y8.73332
G01 X-115.63723 Y8.74561
G01 X-115.64444 Y8.89263
G01 X-115.64703 Y8.91886
G01 X-115.66885 Y9.06591
G01 X-115.67510 Y9.09727
G01 X-115.71193 Y9.24426
G01 X-115.72419 Y9.28465
G01 X-115.77680 Y9.43169
G01 X-115.79930 Y9.48582
G01 X-115.86885 Y9.63286
G01 X-115.90834 Y9.70654
G01 X-115.99648 Y9.85358
G01 X-116.00189 Y9.86166
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.02193 Y9.86169 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.02193 Y9.86169
G01 X-117.02191 Y13.00316
G01 X-117.05510 Y13.13575
G01 X-117.07260 Y13.22353
G01 X-117.09732 Y13.39015
G01 X-117.10527 Y13.47062
G01 X-117.11345 Y13.63727
G01 X-117.11441 Y13.67634
G01 X-117.11441 Y13.69635
G01 X-117.11538 Y13.73529
G01 X-117.11690 Y13.76686
G01 X-117.11693 Y13.92635
G01 X-117.11693 Y14.40394
G01 X-117.10692 Y14.42812
G01 X-117.10692 Y18.37544
G01 X-117.08980 Y18.49096
G01 X-117.08071 Y18.58280
G01 X-117.07301 Y18.73962
G01 X-117.07192 Y18.78430
G01 X-117.07192 Y19.10432
G01 X-117.07083 Y19.14907
G01 X-117.06359 Y19.29614
G01 X-117.05693 Y19.37066
G01 X-117.05693 Y19.79974
G01 X-117.04047 Y19.88262
G01 X-116.99493 Y20.03271
G01 X-116.95818 Y20.12143
G01 X-116.88426 Y20.25976
G01 X-116.83090 Y20.33962
G01 X-116.77692 Y20.40538
G01 X-116.77692 Y21.55026
G01 X-116.96125 Y21.73456
G01 X-117.92500 Y22.69831
G01 X-118.42683 Y22.69831
G01 X-118.75782 Y22.83542
G01 X-118.79180 Y22.84853
G01 X-118.88982 Y22.88361
G01 X-118.94779 Y22.90123
G01 X-119.04580 Y22.92580
G01 X-119.09630 Y22.93585
G01 X-119.19432 Y22.95038
G01 X-119.24044 Y22.95496
G01 X-119.33849 Y22.95978
G01 X-119.36092 Y22.96031
G01 X-132.04893 Y22.96031
G01 X-132.07136 Y22.96087
G01 X-132.16937 Y22.96570
G01 X-132.17895 Y22.96628
G01 X-132.20219 Y22.96788
G01 X-132.21588 Y22.96905
G01 X-132.30161 Y22.97749
G01 X-132.31540 Y22.97865
G01 X-132.35495 Y22.98150
G01 X-132.37044 Y22.98282
G01 X-132.46048 Y22.99168
G01 X-132.47610 Y22.99306
G01 X-132.53224 Y22.99727
G01 X-132.55126 Y22.99892
G01 X-132.64943 Y23.00860
G01 X-132.66874 Y23.01030
G01 X-132.70742 Y23.01338
G01 X-132.71230 Y23.02493
G01 X-132.72843 Y23.06387
G01 X-132.83308 Y23.24708
G01 X-132.88042 Y23.30880
G01 X-132.94138 Y23.37835
G01 X-134.52713 Y24.96412
G01 X-134.55088 Y24.98909
G01 X-134.57262 Y25.01304
G01 X-134.61278 Y25.06504
G01 X-134.65159 Y25.12064
G01 X-134.65210 Y25.12160
G01 X-134.69746 Y25.20849
G01 X-134.71265 Y25.23946
G01 X-134.72380 Y25.27210
G01 X-134.75316 Y25.36564
G01 X-134.75349 Y25.36666
G01 X-134.76536 Y25.43333
G01 X-134.77374 Y25.49864
G01 X-134.77534 Y25.53085
G01 X-134.77618 Y25.56531
G01 X-134.77618 Y32.88333
G01 X-134.78225 Y32.97559
G01 X-134.79241 Y33.05270
G01 X-134.79680 Y33.08163
G01 X-134.86525 Y33.17350
G01 X-134.89096 Y33.20281
G01 X-134.92240 Y33.23637
G01 X-135.91186 Y34.22582
G01 X-135.98136 Y34.28673
G01 X-136.04305 Y34.33408
G01 X-136.22631 Y34.43875
G01 X-136.27384 Y34.45844
G01 X-136.30345 Y34.47129
G01 X-136.31826 Y34.47802
G01 X-136.37262 Y34.49936
G01 X-136.37536 Y34.50042
G01 X-136.38852 Y34.49928
G01 X-136.47099 Y34.47718
G01 X-136.54838 Y34.44109
G01 X-136.61519 Y34.40253
G01 X-136.62271 Y34.39727
G01 X-136.71559 Y34.17749
G01 X-136.73627 Y34.10037
G01 X-136.76007 Y33.95765
G01 X-136.76261 Y33.91874
G01 X-136.76413 Y33.87279
G01 X-136.76413 Y28.75789
G01 X-136.76497 Y28.72342
G01 X-136.76665 Y28.68916
G01 X-136.77170 Y28.65515
G01 X-136.78511 Y28.58771
G01 X-136.79347 Y28.55436
G01 X-136.80503 Y28.52208
G01 X-136.83137 Y28.45847
G01 X-136.84605 Y28.42739
G01 X-136.86370 Y28.39797
G01 X-136.90198 Y28.34067
G01 X-136.92240 Y28.31314
G01 X-136.94551 Y28.28763
G01 X-136.96921 Y28.26274
G01 X-137.04239 Y28.18959
G01 X-137.10355 Y28.12838
G01 X-137.16439 Y28.05901
G01 X-137.21176 Y27.99726
G01 X-137.23954 Y27.95858
G01 X-137.24737 Y27.87547
G01 X-137.24810 Y27.85522
G01 X-137.24838 Y27.84860
G01 X-137.24986 Y27.81679
G01 X-137.25199 Y27.78583
G01 X-137.26606 Y27.63079
G01 X-137.26624 Y27.62965
G01 X-137.28143 Y27.56241
G01 X-137.31361 Y27.44672
G01 X-137.32639 Y27.41215
G01 X-137.35339 Y27.34880
G01 X-137.39027 Y27.27285
G01 X-137.42722 Y27.21045
G01 X-137.46517 Y27.15302
G01 X-137.49403 Y27.11367
G01 X-137.56499 Y27.03206
G01 X-137.61275 Y26.98233
G01 X-137.62222 Y26.97336
G01 X-137.73456 Y26.88357
G01 X-137.77175 Y26.85581
G01 X-137.79156 Y26.84471
G01 X-137.92969 Y26.77044
G01 X-137.93921 Y26.76544
G01 X-137.99387 Y26.74524
G01 X-138.10612 Y26.70895
G01 X-138.11940 Y26.70463
G01 X-138.14373 Y26.69894
G01 X-138.16007 Y26.69531
G01 X-138.21142 Y26.68655
G01 X-138.30690 Y26.67392
G01 X-138.36748 Y26.67092
G01 X-138.43639 Y26.67092
G01 X-138.49695 Y26.67392
G01 X-138.59242 Y26.68657
G01 X-138.66012 Y26.69894
G01 X-138.68445 Y26.70463
G01 X-138.80998 Y26.74524
G01 X-138.86466 Y26.76544
G01 X-138.87419 Y26.77044
G01 X-139.01229 Y26.84471
G01 X-139.02301 Y26.85058
G01 X-139.07322 Y26.87872
G01 X-139.10576 Y26.89589
G01 X-139.17665 Y26.93110
G01 X-139.21762 Y26.94999
G01 X-139.29727 Y26.98413
G01 X-139.40375 Y27.02287
G01 X-139.41384 Y27.02594
G01 X-139.47934 Y27.00643
G01 X-139.55869 Y26.97506
G01 X-139.63139 Y26.93039
G01 X-139.69522 Y26.87374
G01 X-139.74825 Y26.81774
G01 X-139.80141 Y26.75076
G01 X-139.82725 Y26.70298
G01 X-139.81033 Y26.59490
G01 X-139.80708 Y26.57966
G01 X-139.79468 Y26.50750
G01 X-139.79334 Y26.49706
G01 X-139.77627 Y26.40618
G01 X-139.76108 Y26.34542
G01 X-139.75900 Y26.33679
G01 X-139.75122 Y26.30400
G01 X-139.73774 Y26.25500
G01 X-139.73367 Y26.24205
G01 X-139.73334 Y26.24098
G01 X-139.72554 Y26.20161
G01 X-139.72148 Y26.17430
G01 X-139.71310 Y26.10905
G01 X-139.71152 Y26.07679
G01 X-139.71068 Y26.04230
G01 X-139.71068 Y23.43656
G01 X-139.70459 Y23.34434
G01 X-139.69445 Y23.26722
G01 X-139.69392 Y23.26336
G01 X-139.64127 Y23.17723
G01 X-139.63649 Y23.17053
G01 X-139.63078 Y23.16263
G01 X-139.62417 Y23.15363
G01 X-139.58622 Y23.09620
G01 X-139.54927 Y23.03380
G01 X-139.51239 Y22.95785
G01 X-139.48539 Y22.89453
G01 X-139.47261 Y22.85996
G01 X-139.45928 Y22.81198
G01 X-139.44043 Y22.74426
G01 X-139.42524 Y22.67700
G01 X-139.42001 Y22.64698
G01 X-139.41988 Y22.64629
G01 X-139.41881 Y22.64022
G01 X-139.39707 Y22.55056
G01 X-139.38854 Y22.53946
G01 X-139.37426 Y22.51884
G01 X-139.30423 Y22.43286
G01 X-139.29435 Y22.42247
G01 X-139.28269 Y22.41053
G01 X-138.81671 Y21.94454
G01 X-138.79296 Y21.91960
G01 X-138.77127 Y21.89565
G01 X-138.73106 Y21.84363
G01 X-138.69456 Y21.79166
G01 X-138.69222 Y21.78800
G01 X-138.69174 Y21.78706
G01 X-138.64640 Y21.70017
G01 X-138.63118 Y21.66921
G01 X-138.62003 Y21.63657
G01 X-138.59067 Y21.54305
G01 X-138.59037 Y21.54203
G01 X-138.57848 Y21.47530
G01 X-138.57010 Y21.41005
G01 X-138.56852 Y21.37779
G01 X-138.56768 Y21.34333
G01 X-138.56768 Y20.89659
G01 X-138.56159 Y20.80434
G01 X-138.55145 Y20.72722
G01 X-138.55092 Y20.72336
G01 X-138.49827 Y20.63723
G01 X-138.49349 Y20.63053
G01 X-138.48778 Y20.62263
G01 X-138.48117 Y20.61363
G01 X-138.44323 Y20.55620
G01 X-138.40627 Y20.49380
G01 X-138.36939 Y20.41785
G01 X-138.34239 Y20.35453
G01 X-138.32961 Y20.31996
G01 X-138.29743 Y20.20426
G01 X-138.28224 Y20.13700
G01 X-138.28204 Y20.13586
G01 X-138.26796 Y19.98082
G01 X-138.26570 Y19.94633
G01 X-138.26799 Y19.91181
G01 X-138.28204 Y19.75679
G01 X-138.28224 Y19.75562
G01 X-138.29743 Y19.68839
G01 X-138.32961 Y19.57269
G01 X-138.34239 Y19.53812
G01 X-138.36939 Y19.47480
G01 X-138.40627 Y19.39885
G01 X-138.44323 Y19.33645
G01 X-138.48117 Y19.27902
G01 X-138.51003 Y19.23967
G01 X-138.58099 Y19.15804
G01 X-138.62875 Y19.10830
G01 X-138.63822 Y19.09936
G01 X-138.75056 Y19.00955
G01 X-138.78775 Y18.98179
G01 X-138.80756 Y18.97071
G01 X-138.94566 Y18.89644
G01 X-138.95519 Y18.89141
G01 X-139.00987 Y18.87119
G01 X-139.12504 Y18.83398
G01 X-139.13545 Y18.83061
G01 X-139.15973 Y18.82494
G01 X-139.17607 Y18.82131
G01 X-139.22742 Y18.81255
G01 X-139.32290 Y18.79990
G01 X-139.38348 Y18.79692
G01 X-139.45239 Y18.79692
G01 X-139.51295 Y18.79990
G01 X-139.60842 Y18.81257
G01 X-139.67612 Y18.82494
G01 X-139.69456 Y18.82926
G01 X-139.70045 Y18.83063
G01 X-139.82598 Y18.87119
G01 X-139.88064 Y18.89141
G01 X-139.89019 Y18.89644
G01 X-140.02829 Y18.97071
G01 X-140.04810 Y18.98179
G01 X-140.08528 Y19.00955
G01 X-140.19763 Y19.09936
G01 X-140.20710 Y19.10830
G01 X-140.25485 Y19.15804
G01 X-140.32582 Y19.23967
G01 X-140.35468 Y19.27902
G01 X-140.39262 Y19.33645
G01 X-140.42958 Y19.39885
G01 X-140.46646 Y19.47480
G01 X-140.49346 Y19.53812
G01 X-140.50624 Y19.57269
G01 X-140.53842 Y19.68839
G01 X-140.55361 Y19.75562
G01 X-140.55381 Y19.75679
G01 X-140.56786 Y19.91181
G01 X-140.57014 Y19.94633
G01 X-140.56788 Y19.98082
G01 X-140.55381 Y20.13586
G01 X-140.55361 Y20.13700
G01 X-140.53842 Y20.20426
G01 X-140.50624 Y20.31996
G01 X-140.49346 Y20.35453
G01 X-140.46646 Y20.41785
G01 X-140.42958 Y20.49382
G01 X-140.40433 Y20.53644
G01 X-140.39316 Y20.55534
G01 X-140.39262 Y20.55620
G01 X-140.35739 Y20.61589
G01 X-140.34632 Y20.63535
G01 X-140.30855 Y20.70413
G01 X-140.29628 Y20.72743
G01 X-140.29448 Y20.89786
G01 X-140.30250 Y20.97497
G01 X-140.30268 Y20.97685
G01 X-140.39031 Y21.10487
G01 X-140.42095 Y21.14076
G01 X-140.45877 Y21.18173
G01 X-140.49138 Y21.21434
G01 X-140.56092 Y21.27528
G01 X-140.62265 Y21.32265
G01 X-140.62442 Y21.32402
G01 X-140.73105 Y21.34929
G01 X-140.74525 Y21.35153
G01 X-140.75145 Y21.35247
G01 X-140.76217 Y21.35407
G01 X-140.81912 Y21.36494
G01 X-140.84345 Y21.37063
G01 X-140.96898 Y21.41119
G01 X-141.02364 Y21.43141
G01 X-141.03319 Y21.43644
G01 X-141.17129 Y21.51071
G01 X-141.19110 Y21.52179
G01 X-141.22828 Y21.54955
G01 X-141.34063 Y21.63936
G01 X-141.35010 Y21.64830
G01 X-141.39785 Y21.69804
G01 X-141.46882 Y21.77967
G01 X-141.49768 Y21.81902
G01 X-141.53562 Y21.87645
G01 X-141.57258 Y21.93885
G01 X-141.60946 Y22.01480
G01 X-141.63646 Y22.07812
G01 X-141.65226 Y22.12090
G01 X-141.66151 Y22.14591
G01 X-141.69575 Y22.22404
G01 X-141.70436 Y22.24094
G01 X-141.71548 Y22.26733
G01 X-141.72567 Y22.29275
G01 X-141.80364 Y22.44264
G01 X-141.82351 Y22.47350
G01 X-141.84858 Y22.51536
G01 X-141.84921 Y22.51640
G01 X-141.88084 Y22.53187
G01 X-141.91099 Y22.54348
G01 X-141.84489 Y22.56702
G01 X-141.84489 Y22.56705
G01 X-141.83872 Y22.57535
G01 X-141.78708 Y22.64777
G01 X-141.76275 Y22.68353
G01 X-141.71647 Y22.75488
G01 X-141.67576 Y22.82547
G01 X-141.64413 Y22.88770
G01 X-141.64015 Y22.89562
G01 X-141.60949 Y22.95788
G01 X-141.60768 Y22.96151
G01 X-141.57258 Y23.03380
G01 X-141.53562 Y23.09620
G01 X-141.49768 Y23.15363
G01 X-141.49107 Y23.16263
G01 X-141.44058 Y23.24192
G01 X-141.42866 Y23.26364
G01 X-141.42023 Y23.31642
G01 X-141.41137 Y23.41861
G01 X-141.41124 Y23.42681
G01 X-141.41119 Y23.43656
G01 X-141.41119 Y25.48332
G01 X-141.41723 Y25.57552
G01 X-141.42739 Y25.65269
G01 X-141.43179 Y25.68165
G01 X-141.50037 Y25.77359
G01 X-141.52605 Y25.80288
G01 X-141.55739 Y25.83636
G01 X-143.94189 Y28.22086
G01 X-144.01139 Y28.28177
G01 X-144.07308 Y28.32911
G01 X-144.09663 Y28.34649
G01 X-144.21009 Y28.36302
G01 X-144.24900 Y28.36556
G01 X-144.29493 Y28.36706
G01 X-149.32392 Y28.36706
G01 X-149.35842 Y28.36795
G01 X-149.39065 Y28.36950
G01 X-149.45593 Y28.37788
G01 X-149.52263 Y28.38974
G01 X-149.52364 Y28.39007
G01 X-149.61717 Y28.41944
G01 X-149.64978 Y28.43056
G01 X-149.68077 Y28.44580
G01 X-149.76766 Y28.49114
G01 X-149.76860 Y28.49165
G01 X-149.82423 Y28.53046
G01 X-149.87625 Y28.57067
G01 X-149.90020 Y28.59236
G01 X-149.92514 Y28.61611
G01 X-152.98013 Y31.67112
G01 X-153.00388 Y31.69606
G01 X-153.02562 Y31.72004
G01 X-153.06578 Y31.77203
G01 X-153.10459 Y31.82763
G01 X-153.10510 Y31.82860
G01 X-153.15046 Y31.91549
G01 X-153.16565 Y31.94643
G01 X-153.17680 Y31.97909
G01 X-153.20616 Y32.07262
G01 X-153.20649 Y32.07368
G01 X-153.21175 Y32.09878
G01 X-153.21835 Y32.14033
G01 X-153.22674 Y32.20558
G01 X-153.22834 Y32.23784
G01 X-153.22917 Y32.27231
G01 X-153.22917 Y36.41294
G01 X-153.23525 Y36.50520
G01 X-153.24541 Y36.58231
G01 X-153.25320 Y36.62971
G01 X-153.31266 Y36.70055
G01 X-153.32089 Y36.70921
G01 X-153.34866 Y36.74007
G01 X-153.35074 Y36.74253
G01 X-153.35917 Y36.75257
G01 X-153.36153 Y36.75536
G01 X-153.48251 Y36.90491
G01 X-153.49605 Y36.92219
G01 X-153.52031 Y36.96260
G01 X-153.59552 Y37.09795
G01 X-153.61284 Y37.13545
G01 X-153.63857 Y37.19925
G01 X-153.66870 Y37.28599
G01 X-153.69549 Y37.38688
G01 X-153.70987 Y37.45427
G01 X-153.71447 Y37.48251
G01 X-153.71762 Y37.51878
G01 X-153.72892 Y37.64936
G01 X-153.73108 Y37.68383
G01 X-153.72892 Y37.71827
G01 X-153.71447 Y37.88513
G01 X-153.70987 Y37.91337
G01 X-153.69547 Y37.98078
G01 X-153.67073 Y38.07403
G01 X-153.66872 Y38.08162
G01 X-153.63857 Y38.16839
G01 X-153.61282 Y38.23224
G01 X-153.61076 Y38.23669
G01 X-153.59552 Y38.26973
G01 X-153.52031 Y38.40506
G01 X-153.49603 Y38.44548
G01 X-153.48254 Y38.46272
G01 X-153.45018 Y38.50270
G01 X-153.36928 Y38.60270
G01 X-153.35831 Y38.61436
G01 X-153.35028 Y38.62274
G01 X-153.30865 Y38.66221
G01 X-153.21891 Y38.74052
G01 X-153.16092 Y38.79122
G01 X-153.16029 Y38.79183
G01 X-153.10731 Y38.83864
G01 X-153.10169 Y38.84316
G01 X-152.96352 Y38.98548
G01 X-152.95089 Y39.00194
G01 X-152.89984 Y39.06325
G01 X-152.89410 Y39.06968
G01 X-152.88460 Y39.08243
G01 X-152.88315 Y39.08439
G01 X-152.87632 Y39.15287
G01 X-152.88269 Y39.23801
G01 X-152.90375 Y39.32076
G01 X-152.92923 Y39.39358
G01 X-152.96435 Y39.47146
G01 X-152.97835 Y39.49196
G01 X-153.00677 Y39.50732
G01 X-153.10771 Y39.56186
G01 X-153.18483 Y39.59046
G01 X-153.36959 Y39.63516
G01 X-153.43588 Y39.64263
G01 X-153.51485 Y39.64707
G01 X-157.30179 Y39.64707
G01 X-157.39404 Y39.64100
G01 X-157.44603 Y39.63414
G01 X-157.46955 Y39.62485
G01 X-157.55960 Y39.58182
G01 X-157.56445 Y39.57905
G01 X-157.57052 Y39.57557
G01 X-157.58642 Y39.56635
G01 X-157.79063 Y39.46264
G01 X-157.82182 Y39.44779
G01 X-157.85439 Y39.43625
G01 X-158.07209 Y39.36518
G01 X-158.22983 Y39.32330
G01 X-158.29724 Y39.30890
G01 X-158.32825 Y39.30384
G01 X-158.59025 Y39.27618
G01 X-158.68753 Y39.27141
G01 X-158.75634 Y39.27141
G01 X-158.85360 Y39.27618
G01 X-159.11560 Y39.30384
G01 X-159.14661 Y39.30890
G01 X-159.21402 Y39.32330
G01 X-159.37176 Y39.36518
G01 X-159.58946 Y39.43625
G01 X-159.62202 Y39.44779
G01 X-159.65322 Y39.46264
G01 X-159.85741 Y39.56633
G01 X-159.99855 Y39.64827
G01 X-160.05642 Y39.68576
G01 X-160.08189 Y39.70412
G01 X-160.28672 Y39.86983
G01 X-160.35888 Y39.93524
G01 X-160.40752 Y39.98388
G01 X-160.47292 Y40.05604
G01 X-160.63863 Y40.26086
G01 X-160.65700 Y40.28634
G01 X-160.69449 Y40.34420
G01 X-160.77643 Y40.48535
G01 X-160.88011 Y40.68954
G01 X-160.89497 Y40.72073
G01 X-160.90650 Y40.75329
G01 X-160.97757 Y40.97097
G01 X-161.01946 Y41.12873
G01 X-161.03383 Y41.19614
G01 X-161.03889 Y41.22716
G01 X-161.06655 Y41.48916
G01 X-161.07132 Y41.58641
G01 X-161.07132 Y41.65522
G01 X-161.06655 Y41.75250
G01 X-161.04399 Y41.96619
G01 X-161.03889 Y42.01445
G01 X-161.03383 Y42.04552
G01 X-161.01946 Y42.11293
G01 X-160.97757 Y42.27069
G01 X-160.90650 Y42.48837
G01 X-160.89497 Y42.52093
G01 X-160.88011 Y42.55212
G01 X-160.77643 Y42.75631
G01 X-160.70843 Y42.87343
G01 X-160.69449 Y42.89746
G01 X-160.65700 Y42.95530
G01 X-160.63863 Y42.98080
G01 X-160.47292 Y43.18562
G01 X-160.40752 Y43.25778
G01 X-160.38380 Y43.28270
G01 X-160.00729 Y43.65921
G01 X-159.98237 Y43.68293
G01 X-159.91024 Y43.74834
G01 X-159.81476 Y43.82555
G01 X-159.74603 Y43.88908
G01 X-159.69251 Y43.94541
G01 X-159.69147 Y43.94651
G01 X-159.63912 Y44.00185
G01 X-159.54842 Y44.11542
G01 X-159.49947 Y44.18753
G01 X-159.49452 Y44.19560
G01 X-159.49261 Y44.27241
G01 X-159.50275 Y44.33962
G01 X-159.51067 Y44.34808
G01 X-159.51072 Y44.34811
G01 X-159.57679 Y44.41859
G01 X-159.61016 Y44.44828
G01 X-159.63940 Y44.47544
G01 X-159.67221 Y44.50731
G01 X-159.76777 Y44.58646
G01 X-159.80894 Y44.61524
G01 X-159.85995 Y44.64780
G01 X-159.99866 Y44.72832
G01 X-160.05649 Y44.76581
G01 X-160.08189 Y44.78410
G01 X-160.28672 Y44.94983
G01 X-160.35895 Y45.01529
G01 X-160.40762 Y45.06398
G01 X-160.47292 Y45.13604
G01 X-160.63863 Y45.34086
G01 X-160.65705 Y45.36647
G01 X-160.67087 Y45.38636
G01 X-160.69451 Y45.42428
G01 X-160.77643 Y45.56535
G01 X-160.88014 Y45.76962
G01 X-160.89497 Y45.80073
G01 X-160.90653 Y45.83340
G01 X-160.97757 Y46.05097
G01 X-161.01946 Y46.20883
G01 X-161.03386 Y46.27622
G01 X-161.03889 Y46.30716
G01 X-161.06655 Y46.56916
G01 X-161.07132 Y46.66639
G01 X-161.07216 Y46.70086
G01 X-161.07132 Y46.73535
G01 X-161.06655 Y46.83253
G01 X-161.06292 Y46.86710
G01 X-161.04602 Y47.02692
G01 X-161.04587 Y47.02826
G01 X-161.03889 Y47.09448
G01 X-161.03381 Y47.12565
G01 X-161.01943 Y47.19301
G01 X-160.97757 Y47.35069
G01 X-160.90648 Y47.56844
G01 X-160.89500 Y47.60093
G01 X-160.88006 Y47.63220
G01 X-160.77640 Y47.83636
G01 X-160.76533 Y47.85541
G01 X-160.69444 Y47.97756
G01 X-160.65695 Y48.03540
G01 X-160.63863 Y48.06080
G01 X-160.47295 Y48.26562
G01 X-160.40747 Y48.33786
G01 X-160.38372 Y48.36278
G01 X-160.08723 Y48.65927
G01 X-160.06228 Y48.68302
G01 X-159.99022 Y48.74833
G01 X-159.80386 Y48.89907
G01 X-159.76231 Y48.93550
G01 X-159.73450 Y48.96181
G01 X-159.70965 Y48.98429
G01 X-159.67531 Y49.01398
G01 X-159.52360 Y49.18673
G01 X-159.48525 Y49.24327
G01 X-159.42172 Y49.27723
G01 X-159.33297 Y49.31398
G01 X-159.22942 Y49.34540
G01 X-159.15845 Y49.34886
G01 X-158.94036 Y49.37032
G01 X-158.85649 Y49.37449
G01 X-158.76196 Y49.37449
G01 X-158.68230 Y49.37837
G01 X-158.46505 Y49.39978
G01 X-158.42540 Y49.40271
G01 X-158.29137 Y49.40928
G01 X-158.20981 Y49.41734
G01 X-157.81774 Y49.47550
G01 X-157.75838 Y49.48734
G01 X-157.72558 Y49.50093
G01 X-157.71360 Y49.50733
G01 X-144.87895 Y49.50733
G01 X-144.83092 Y49.50969
G01 X-144.44072 Y49.54812
G01 X-144.34652 Y49.56687
G01 X-144.11944 Y49.63575
G01 X-144.09533 Y49.66364
G01 X-144.03290 Y49.72351
G01 X-143.99480 Y49.75810
G01 X-143.93277 Y49.81134
G01 X-143.86739 Y49.86158
G01 X-143.83912 Y49.88099
G01 X-143.75299 Y49.93730
G01 X-143.72843 Y49.95155
G01 X-143.61098 Y50.01972
G01 X-143.60230 Y50.02475
G01 X-143.54443 Y50.06227
G01 X-143.51896 Y50.08061
G01 X-143.45127 Y50.13539
G01 X-143.31413 Y50.24632
G01 X-143.24197 Y50.31175
G01 X-143.19333 Y50.36039
G01 X-143.12792 Y50.43252
G01 X-143.01081 Y50.57730
G01 X-142.96219 Y50.63737
G01 X-142.94385 Y50.66285
G01 X-142.90634 Y50.72071
G01 X-142.82442 Y50.86183
G01 X-142.72074 Y51.06605
G01 X-142.70585 Y51.09722
G01 X-142.69435 Y51.12980
G01 X-142.68825 Y51.14845
G01 X-142.62328 Y51.34748
G01 X-142.58139 Y51.50524
G01 X-142.56702 Y51.57265
G01 X-142.56196 Y51.60367
G01 X-142.53430 Y51.86564
G01 X-142.52953 Y51.96292
G01 X-142.52953 Y52.03173
G01 X-142.53430 Y52.12901
G01 X-142.56196 Y52.39099
G01 X-142.56702 Y52.42203
G01 X-142.58139 Y52.48944
G01 X-142.62328 Y52.64717
G01 X-142.65929 Y52.75756
G01 X-142.69435 Y52.86488
G01 X-142.70585 Y52.89742
G01 X-142.72074 Y52.92863
G01 X-142.82442 Y53.13280
G01 X-142.90636 Y53.27397
G01 X-142.94385 Y53.33181
G01 X-142.96222 Y53.35731
G01 X-143.12792 Y53.56213
G01 X-143.19333 Y53.63429
G01 X-143.24197 Y53.68294
G01 X-143.31411 Y53.74832
G01 X-143.51893 Y53.91405
G01 X-143.54446 Y53.93241
G01 X-143.60230 Y53.96990
G01 X-143.74344 Y54.05182
G01 X-143.94766 Y54.15550
G01 X-143.97888 Y54.17041
G01 X-144.01070 Y54.18169
G01 X-144.01139 Y54.18192
G01 X-144.22907 Y54.25299
G01 X-144.38682 Y54.29487
G01 X-144.45424 Y54.30925
G01 X-144.48525 Y54.31430
G01 X-144.74725 Y54.34196
G01 X-144.84453 Y54.34674
G01 X-144.87895 Y54.34758
G01 X-158.50544 Y54.34758
G01 X-158.53983 Y54.34674
G01 X-158.63711 Y54.34196
G01 X-158.89909 Y54.31430
G01 X-158.93010 Y54.30925
G01 X-158.99751 Y54.29487
G01 X-159.15527 Y54.25299
G01 X-159.37295 Y54.18192
G01 X-159.40551 Y54.17041
G01 X-159.43671 Y54.15553
G01 X-159.64090 Y54.05182
G01 X-159.78204 Y53.96990
G01 X-159.83988 Y53.93241
G01 X-159.86541 Y53.91402
G01 X-160.07023 Y53.74834
G01 X-160.14237 Y53.68294
G01 X-160.16729 Y53.65921
G01 X-160.38380 Y53.44270
G01 X-160.40752 Y53.41778
G01 X-160.47292 Y53.34562
G01 X-160.63863 Y53.14080
G01 X-160.65700 Y53.11532
G01 X-160.69449 Y53.05746
G01 X-160.77643 Y52.91631
G01 X-160.88011 Y52.71212
G01 X-160.89497 Y52.68093
G01 X-160.90650 Y52.64837
G01 X-160.97757 Y52.43069
G01 X-161.01946 Y52.27293
G01 X-161.03383 Y52.20552
G01 X-161.03889 Y52.17448
G01 X-161.06655 Y51.91250
G01 X-161.07132 Y51.81522
G01 X-161.07132 Y51.74641
G01 X-161.06655 Y51.64916
G01 X-161.03889 Y51.38716
G01 X-161.03383 Y51.35614
G01 X-161.01946 Y51.28873
G01 X-160.97757 Y51.13097
G01 X-160.90650 Y50.91329
G01 X-160.89497 Y50.88073
G01 X-160.88011 Y50.84954
G01 X-160.77643 Y50.64535
G01 X-160.69449 Y50.50420
G01 X-160.65700 Y50.44634
G01 X-160.63863 Y50.42086
G01 X-160.47292 Y50.21604
G01 X-160.40752 Y50.14388
G01 X-160.35888 Y50.09524
G01 X-160.28672 Y50.02983
G01 X-160.08189 Y49.86412
G01 X-160.05642 Y49.84576
G01 X-159.99855 Y49.80827
G01 X-159.84834 Y49.72107
G01 X-159.79726 Y49.68846
G01 X-159.75606 Y49.65968
G01 X-159.67059 Y49.59016
G01 X-159.62647 Y49.54878
G01 X-159.60877 Y49.53260
G01 X-159.56330 Y49.49216
G01 X-159.50117 Y49.42521
G01 X-159.49177 Y49.41510
G01 X-159.48126 Y49.34517
G01 X-159.48339 Y49.25981
G01 X-159.48525 Y49.24327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.50115 Y49.42518 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.50115 Y49.42518
G01 X-159.25436 Y49.35036
G01 X-159.22942 Y49.34540
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.51067 Y44.34808 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.51067 Y44.34808
G01 X-159.31430 Y44.28859
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.49452 Y44.19560 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.49452 Y44.19560
G01 X-159.34179 Y44.27721
G01 X-159.31430 Y44.28859
G01 X-159.24788 Y44.29197
G01 X-159.24636 Y44.29197
G01 X-159.15583 Y44.29644
G01 X-158.84722 Y44.32682
G01 X-158.77222 Y44.33053
G01 X-158.75850 Y44.33053
G01 X-158.68588 Y44.33408
G01 X-158.38156 Y44.36408
G01 X-158.34542 Y44.36672
G01 X-158.29538 Y44.36919
G01 X-158.22177 Y44.37645
G01 X-157.82972 Y44.43462
G01 X-157.74235 Y44.45202
G01 X-157.60130 Y44.48735
G01 X-144.87895 Y44.48732
G01 X-144.83092 Y44.48496
G01 X-144.44072 Y44.44653
G01 X-144.34652 Y44.42779
G01 X-143.97133 Y44.31399
G01 X-143.88258 Y44.27721
G01 X-143.53681 Y44.09240
G01 X-143.51144 Y44.07546
G01 X-143.45696 Y44.03904
G01 X-143.15388 Y43.79032
G01 X-143.08594 Y43.72238
G01 X-143.07491 Y43.70897
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-141.09488 Y42.53051 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-141.09488 Y42.53051
G01 X-140.50438 Y41.94001
G01 X-140.50438 Y41.06295
G01 X-140.50202 Y41.01491
G01 X-140.49722 Y40.96615
G01 X-140.47848 Y40.87194
G01 X-140.46425 Y40.82502
G01 X-140.42750 Y40.73628
G01 X-140.40441 Y40.69307
G01 X-140.35104 Y40.61319
G01 X-140.31993 Y40.57532
G01 X-140.25201 Y40.50740
G01 X-140.21414 Y40.47631
G01 X-140.13426 Y40.42294
G01 X-140.09105 Y40.39983
G01 X-140.00230 Y40.36307
G01 X-139.95541 Y40.34885
G01 X-139.86118 Y40.33010
G01 X-139.82194 Y40.32624
G01 X-139.81206 Y40.32820
G01 X-139.76436 Y40.33892
G01 X-139.70632 Y40.35345
G01 X-139.61790 Y40.37110
G01 X-139.45127 Y40.39581
G01 X-139.37030 Y40.40379
G01 X-139.20368 Y40.41197
G01 X-139.16438 Y40.41293
G01 X-138.91439 Y40.41293
G01 X-138.87508 Y40.41197
G01 X-138.70845 Y40.40379
G01 X-138.62748 Y40.39581
G01 X-138.46085 Y40.37110
G01 X-138.37244 Y40.35345
G01 X-138.31437 Y40.33892
G01 X-138.26667 Y40.32820
G01 X-138.25681 Y40.32624
G01 X-138.21117 Y40.30183
G01 X-138.13131 Y40.24847
G01 X-138.00248 Y40.14275
G01 X-137.93456 Y40.07483
G01 X-137.82888 Y39.94603
G01 X-137.77551 Y39.86615
G01 X-137.69695 Y39.71921
G01 X-137.66019 Y39.63046
G01 X-137.61183 Y39.47100
G01 X-137.59309 Y39.37679
G01 X-137.57675 Y39.21098
G01 X-137.57675 Y39.11492
G01 X-137.59309 Y38.94908
G01 X-137.60045 Y38.91200
G01 X-137.05062 Y38.36214
G01 X-136.87041 Y38.18193
G01 X-136.83810 Y38.14629
G01 X-136.79459 Y38.09325
G01 X-136.74122 Y38.01340
G01 X-136.70886 Y37.95289
G01 X-136.67211 Y37.86415
G01 X-136.65219 Y37.79849
G01 X-136.63345 Y37.70428
G01 X-136.62674 Y37.63598
G01 X-136.62438 Y37.58795
G01 X-136.62438 Y34.39334
G01 X-136.71559 Y34.17749
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-134.61791 Y38.75249 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-134.61791 Y38.75249
G01 X-134.61791 Y39.30826
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.15893 Y41.51192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.15893 Y41.51192
G01 X-132.21319 Y41.41044
G01 X-132.24994 Y41.32170
G01 X-132.29546 Y41.17163
G01 X-132.31194 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.31194 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.31194 Y39.85777
G01 X-132.32840 Y39.77501
G01 X-132.37392 Y39.62492
G01 X-132.41070 Y39.53618
G01 X-132.48461 Y39.39787
G01 X-132.53798 Y39.31802
G01 X-132.63747 Y39.19678
G01 X-132.70539 Y39.12886
G01 X-132.74146 Y39.09927
G01 X-132.74123 Y38.97885
G01 X-132.71913 Y38.98274
G01 X-132.63371 Y38.98274
G01 X-132.56036 Y38.96981
G01 X-132.54959 Y38.96790
G01 X-132.47509 Y38.94794
G01 X-132.39482 Y38.91873
G01 X-132.32086 Y38.87603
G01 X-132.27867 Y38.84062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-136.37262 Y34.49936 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-136.37262 Y34.49936
G01 X-136.40244 Y34.53570
G01 X-136.45580 Y34.61556
G01 X-136.50203 Y34.70200
G01 X-136.53878 Y34.79075
G01 X-136.56723 Y34.88455
G01 X-136.58598 Y34.97876
G01 X-136.59558 Y35.07632
G01 X-136.59794 Y35.12432
G01 X-136.59794 Y42.26924
G01 X-139.40101 Y45.07231
G01 X-139.85092 Y45.07231
G01 X-140.09095 Y45.31234
G01 X-140.21594 Y45.56230
G01 X-140.21594 Y47.16235
G01 X-140.09095 Y47.41231
G01 X-139.93362 Y47.56964
G01 X-139.73398 Y47.65234
G01 X-139.48452 Y47.90179
G01 X-139.46397 Y47.97324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.38658 Y47.65232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.38658 Y47.65232
G01 X-139.73398 Y47.65234
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-143.07494 Y45.28567 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-143.07494 Y45.28567
G01 X-143.08594 Y45.27226
G01 X-143.15388 Y45.20431
G01 X-143.45696 Y44.95560
G01 X-143.53681 Y44.90223
G01 X-143.83598 Y44.74234
G01 X-143.88258 Y44.71742
G01 X-143.97133 Y44.68064
G01 X-144.34652 Y44.56685
G01 X-144.44072 Y44.54810
G01 X-144.83092 Y44.50967
G01 X-144.87895 Y44.50731
G01 X-157.56396 Y44.50731
G01 X-157.60130 Y44.48735
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-157.75838 Y49.48734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-157.75838 Y49.48734
G01 X-144.87895 Y49.48731
G01 X-144.83092 Y49.48495
G01 X-144.44072 Y49.44652
G01 X-144.34652 Y49.42778
G01 X-144.12190 Y49.35965
G01 X-144.10745 Y49.34357
G01 X-143.99498 Y49.23593
G01 X-143.93196 Y49.18482
G01 X-143.92830 Y49.18188
G01 X-143.86706 Y49.13283
G01 X-143.76643 Y49.06504
G01 X-143.75289 Y49.05732
G01 X-143.60230 Y48.96989
G01 X-143.54443 Y48.93240
G01 X-143.51896 Y48.91403
G01 X-143.31411 Y48.74833
G01 X-143.30148 Y48.73690
G01 X-143.23908 Y48.68645
G01 X-143.22884 Y48.67908
G01 X-143.18269 Y48.64299
G01 X-143.16785 Y48.63039
G01 X-142.98363 Y48.51307
G01 X-142.93334 Y48.48927
G01 X-142.90654 Y48.50535
G01 X-142.87685 Y48.52384
G01 X-142.80354 Y48.57131
G01 X-142.72277 Y48.63123
G01 X-142.72241 Y48.63154
G01 X-142.69425 Y48.65429
G01 X-142.66153 Y48.67939
G01 X-142.59206 Y48.74027
G01 X-139.31277 Y52.01954
G01 X-139.25183 Y52.08909
G01 X-139.20446 Y52.15081
G01 X-139.09984 Y52.33402
G01 X-139.06789 Y52.41116
G01 X-139.04708 Y52.48286
G01 X-138.67881 Y52.85116
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.12638 Y52.70615 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.12638 Y52.70615
G01 X-139.09753 Y52.65617
G01 X-139.06144 Y52.57875
G01 X-139.04119 Y52.50326
G01 X-139.04708 Y52.48286
G01 X-139.04711 Y52.48286
G01 X-139.06789 Y52.41116
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-137.20950 Y51.52033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-137.20950 Y51.52033
G01 X-136.32093 Y51.52030
G01 X-136.32093 Y53.00785
G01 X-136.35748 Y53.03785
G01 X-136.42540 Y53.10577
G01 X-136.52291 Y53.22459
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-136.52293 Y54.73998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-136.52293 Y54.73998
G01 X-136.52293 Y54.96917
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-136.38854 Y54.89571 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-136.38854 Y54.89571
G01 X-136.42540 Y54.85885
G01 X-136.52293 Y54.73998
G01 X-136.52403 Y54.73693
G01 X-136.55232 Y54.64389
G01 X-136.59159 Y54.48707
G01 X-136.60774 Y54.40607
G01 X-136.63101 Y54.24923
G01 X-136.63833 Y54.17516
G01 X-136.64605 Y54.01832
G01 X-136.64605 Y53.94631
G01 X-136.63833 Y53.78949
G01 X-136.63101 Y53.71542
G01 X-136.60774 Y53.55858
G01 X-136.59159 Y53.47758
G01 X-136.55232 Y53.32076
G01 X-136.52403 Y53.22772
G01 X-136.52291 Y53.22459
G01 X-136.52293 Y52.61695
G01 X-136.52530 Y52.56894
G01 X-136.53490 Y52.47138
G01 X-136.55364 Y52.37717
G01 X-136.58209 Y52.28337
G01 X-136.61884 Y52.19462
G01 X-136.66507 Y52.10819
G01 X-136.71844 Y52.02833
G01 X-136.78062 Y51.95256
G01 X-136.81290 Y51.91692
G01 X-137.20950 Y51.52033
G01 X-137.89392 Y51.23681
G01 X-137.91343 Y51.22818
G01 X-137.97932 Y51.19701
G01 X-138.00988 Y51.18073
G01 X-138.07053 Y51.14436
G01 X-138.09451 Y51.12836
G01 X-138.15021 Y51.08706
G01 X-138.17002 Y51.07080
G01 X-138.22092 Y51.02467
G01 X-138.22979 Y51.01619
G01 X-141.02681 Y48.21919
G01 X-141.03527 Y48.21033
G01 X-141.08140 Y48.15943
G01 X-141.09765 Y48.13961
G01 X-141.13895 Y48.08391
G01 X-141.15495 Y48.05993
G01 X-141.19133 Y47.99928
G01 X-141.20763 Y47.96870
G01 X-141.23880 Y47.90281
G01 X-141.24744 Y47.88330
G01 X-141.31292 Y47.72521
G01 X-141.31292 Y43.31450
G01 X-141.31226 Y43.28773
G01 X-141.30888 Y43.21913
G01 X-141.30349 Y43.16454
G01 X-141.29331 Y43.09594
G01 X-141.28170 Y43.03764
G01 X-141.26450 Y42.96904
G01 X-141.24482 Y42.90427
G01 X-141.22026 Y42.83566
G01 X-141.20619 Y42.79924
G01 X-141.09488 Y42.53051
G01 X-141.09493 Y34.58038
G01 X-140.83060 Y34.31605
G01 X-140.80073 Y34.32511
G01 X-140.70652 Y34.34386
G01 X-140.60896 Y34.35346
G01 X-140.51292 Y34.35346
G01 X-140.41536 Y34.34386
G01 X-140.32115 Y34.32511
G01 X-140.28211 Y34.31328
G01 X-140.22735 Y34.29666
G01 X-140.13860 Y34.25991
G01 X-140.05216 Y34.21368
G01 X-139.97231 Y34.16032
G01 X-139.89654 Y34.09814
G01 X-139.87934 Y34.08097
G01 X-139.85072 Y34.01206
G01 X-139.81566 Y33.91404
G01 X-139.79638 Y33.85336
G01 X-139.76093 Y33.81787
G01 X-139.57515 Y33.44632
G01 X-139.57515 Y31.84630
G01 X-139.76093 Y31.47475
G01 X-139.87937 Y31.35631
G01 X-139.87937 Y30.95982
G01 X-141.97888 Y28.86035
G01 X-143.03590 Y29.91735
G01 X-143.07154 Y29.94963
G01 X-143.14730 Y30.01181
G01 X-143.22716 Y30.06518
G01 X-143.31360 Y30.11141
G01 X-143.40235 Y30.14816
G01 X-143.49615 Y30.17661
G01 X-143.59036 Y30.19535
G01 X-143.68792 Y30.20495
G01 X-143.73595 Y30.20732
G01 X-148.91387 Y30.20732
G01 X-151.38892 Y32.68239
G01 X-151.38892 Y36.57499
G01 X-151.36098 Y36.59793
G01 X-151.29306 Y36.66585
G01 X-151.16870 Y36.81739
G01 X-151.11534 Y36.89727
G01 X-151.02291 Y37.07014
G01 X-150.98615 Y37.15889
G01 X-150.92926 Y37.34649
G01 X-150.91051 Y37.44070
G01 X-150.89131 Y37.63577
G01 X-150.89131 Y37.73184
G01 X-150.91051 Y37.92693
G01 X-150.92926 Y38.02114
G01 X-150.98615 Y38.20875
G01 X-151.02291 Y38.29747
G01 X-151.11534 Y38.47037
G01 X-151.16870 Y38.55023
G01 X-151.29306 Y38.70176
G01 X-151.36098 Y38.76971
G01 X-151.51252 Y38.89406
G01 X-151.59237 Y38.94743
G01 X-151.76527 Y39.03984
G01 X-151.85402 Y39.07659
G01 X-152.04160 Y39.13351
G01 X-152.13581 Y39.15223
G01 X-152.33090 Y39.17146
G01 X-152.42697 Y39.17146
G01 X-152.62206 Y39.15223
G01 X-152.71627 Y39.13351
G01 X-152.88460 Y39.08243
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.00677 Y39.50732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.00677 Y39.50732
G01 X-144.87895 Y39.50732
G01 X-144.83092 Y39.50968
G01 X-144.44072 Y39.54811
G01 X-144.34652 Y39.56686
G01 X-144.04433 Y39.65853
G01 X-143.97133 Y39.68065
G01 X-143.88258 Y39.71743
G01 X-143.53681 Y39.90224
G01 X-143.45696 Y39.95561
G01 X-143.15388 Y40.20432
G01 X-143.08594 Y40.27227
G01 X-143.07494 Y40.28568
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.64203 Y37.91294 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.64203 Y37.91294
G01 X-139.72067 Y37.94550
G01 X-139.86761 Y38.02404
G01 X-139.94749 Y38.07743
G01 X-140.07629 Y38.18312
G01 X-140.14421 Y38.25104
G01 X-140.24990 Y38.37984
G01 X-140.30329 Y38.45972
G01 X-140.38183 Y38.60666
G01 X-140.41858 Y38.69541
G01 X-140.46697 Y38.85487
G01 X-140.48569 Y38.94908
G01 X-140.50202 Y39.11492
G01 X-140.50202 Y39.21098
G01 X-140.48569 Y39.37679
G01 X-140.46697 Y39.47100
G01 X-140.41858 Y39.63046
G01 X-140.38183 Y39.71921
G01 X-140.30329 Y39.86615
G01 X-140.24990 Y39.94603
G01 X-140.19128 Y40.01748
G01 X-140.14421 Y40.07483
G01 X-140.07629 Y40.14275
G01 X-139.94749 Y40.24847
G01 X-139.86761 Y40.30183
G01 X-139.82194 Y40.32624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-138.25681 Y40.32624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-138.25681 Y40.32624
G01 X-138.21760 Y40.33010
G01 X-138.12339 Y40.34885
G01 X-138.07647 Y40.36307
G01 X-137.98773 Y40.39983
G01 X-137.94452 Y40.42294
G01 X-137.86464 Y40.47631
G01 X-137.83065 Y40.50420
G01 X-137.82677 Y40.50740
G01 X-137.75885 Y40.57532
G01 X-137.72776 Y40.61319
G01 X-137.67439 Y40.69307
G01 X-137.65128 Y40.73628
G01 X-137.61452 Y40.82502
G01 X-137.60030 Y40.87194
G01 X-137.58156 Y40.96615
G01 X-137.57675 Y41.01491
G01 X-137.57439 Y41.06295
G01 X-137.57439 Y42.26294
G01 X-137.57675 Y42.31097
G01 X-137.58156 Y42.35974
G01 X-137.60030 Y42.45395
G01 X-137.61452 Y42.50084
G01 X-137.65128 Y42.58959
G01 X-137.67439 Y42.63282
G01 X-137.72776 Y42.71268
G01 X-137.75885 Y42.75057
G01 X-137.82677 Y42.81849
G01 X-137.86464 Y42.84958
G01 X-137.87932 Y42.85939
G01 X-137.94452 Y42.90295
G01 X-137.98773 Y42.92606
G01 X-138.07647 Y42.96281
G01 X-138.12339 Y42.97704
G01 X-138.21760 Y42.99578
G01 X-138.26636 Y43.00058
G01 X-138.31440 Y43.00295
G01 X-139.19143 Y43.00295
G01 X-139.85094 Y43.66243
G01 X-139.85092 Y45.07231
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-134.61791 Y41.63833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-134.61791 Y41.63833
G01 X-134.52639 Y41.74986
G01 X-134.45847 Y41.81778
G01 X-134.42240 Y41.84737
G01 X-134.42284 Y42.09045
G01 X-134.45977 Y42.10036
G01 X-134.54003 Y42.12957
G01 X-134.60567 Y42.16746
G01 X-134.61791 Y42.18908
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.85162 Y47.25033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.85162 Y47.25033
G01 X-129.82655 Y47.26994
G01 X-129.82653 Y47.26994
G01 X-129.79605 Y47.27314
G01 X-129.71665 Y47.26758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.77194 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.77194 Y47.47777
G01 X-129.75546 Y47.39501
G01 X-129.71688 Y47.26776
G01 X-129.71665 Y47.26758
G01 X-129.71147 Y47.26334
G01 X-129.69534 Y47.24929
G01 X-129.64243 Y47.20609
G01 X-129.61667 Y47.18643
G01 X-129.49503 Y47.07360
G01 X-129.48015 Y47.05663
G01 X-129.44583 Y47.02013
G01 X-129.42622 Y47.00065
G01 X-129.38038 Y46.95056
G01 X-129.33903 Y46.90492
G01 X-129.29033 Y46.85623
G01 X-129.24891 Y46.81869
G01 X-129.16897 Y46.75691
G01 X-129.11241 Y46.71752
G01 X-129.10337 Y46.71185
G01 X-128.97377 Y46.64421
G01 X-128.94279 Y46.62900
G01 X-128.91015 Y46.61785
G01 X-128.77065 Y46.57403
G01 X-128.76026 Y46.57165
G01 X-128.69237 Y46.55953
G01 X-128.59217 Y46.54665
G01 X-128.53634 Y46.54391
G01 X-128.46753 Y46.54391
G01 X-128.41167 Y46.54665
G01 X-128.31147 Y46.55953
G01 X-128.24355 Y46.57165
G01 X-128.23321 Y46.57403
G01 X-128.09369 Y46.61785
G01 X-128.06108 Y46.62900
G01 X-128.03011 Y46.64419
G01 X-127.90047 Y46.71185
G01 X-127.89146 Y46.71749
G01 X-127.83484 Y46.75694
G01 X-127.75490 Y46.81871
G01 X-127.71348 Y46.85625
G01 X-127.66484 Y46.90489
G01 X-127.62361 Y46.95039
G01 X-127.60347 Y46.97360
G01 X-127.57213 Y47.00820
G01 X-127.55973 Y47.02153
G01 X-127.50967 Y47.07401
G01 X-127.46004 Y47.12173
G01 X-127.39831 Y47.17619
G01 X-127.38683 Y47.18617
G01 X-127.31162 Y47.25033
G01 X-127.28655 Y47.26994
G01 X-127.28653 Y47.26994
G01 X-127.25605 Y47.27314
G01 X-127.17665 Y47.26758
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.23192 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.23192 Y47.47777
G01 X-127.24840 Y47.39501
G01 X-127.28627 Y47.27015
G01 X-127.28653 Y47.26994
G01 X-127.31162 Y47.25033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.77194 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.77194 Y48.70880
G01 X-129.78840 Y48.79163
G01 X-129.83392 Y48.94170
G01 X-129.87070 Y49.03044
G01 X-129.94461 Y49.16875
G01 X-129.99798 Y49.24863
G01 X-130.09747 Y49.36986
G01 X-130.16539 Y49.43778
G01 X-130.20194 Y49.46775
G01 X-130.20194 Y50.07370
G01 X-130.18797 Y50.08635
G01 X-129.34192 Y50.93237
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.94297 Y53.33135 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.94297 Y53.33135
G01 X-126.75897 Y53.51535
G01 X-126.72666 Y53.55098
G01 X-126.68315 Y53.60402
G01 X-126.62979 Y53.68388
G01 X-126.59743 Y53.74438
G01 X-126.59285 Y53.75543
G01 X-126.56067 Y53.83313
G01 X-126.54076 Y53.89878
G01 X-126.52201 Y53.99299
G01 X-126.51531 Y54.06129
G01 X-126.51295 Y54.10930
G01 X-126.51295 Y57.68681
G01 X-126.48651 Y57.70447
G01 X-126.33497 Y57.82883
G01 X-126.26705 Y57.89674
G01 X-126.14269 Y58.04828
G01 X-126.08933 Y58.12816
G01 X-125.99692 Y58.30104
G01 X-125.96017 Y58.38978
G01 X-125.90324 Y58.57739
G01 X-125.88450 Y58.67160
G01 X-125.86530 Y58.86669
G01 X-125.86294 Y58.91470
G01 X-125.86294 Y59.51472
G01 X-125.86530 Y59.56273
G01 X-125.88450 Y59.75783
G01 X-125.89181 Y59.79468
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-128.79999 Y59.86067 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-128.79999 Y59.86067
G01 X-128.80316 Y59.85983
G01 X-128.88729 Y59.84500
G01 X-128.97271 Y59.84500
G01 X-129.05683 Y59.85983
G01 X-129.13070 Y59.87962
G01 X-129.11629 Y59.80721
G01 X-129.09227 Y59.56334
G01 X-129.08993 Y59.51531
G01 X-129.08993 Y58.56075
G01 X-129.05683 Y58.56962
G01 X-128.97271 Y58.58445
G01 X-128.88729 Y58.58445
G01 X-128.80316 Y58.56962
G01 X-128.79999 Y58.56878
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-125.54406 Y59.80190 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-125.54406 Y59.80190
G01 X-125.60596 Y59.78531
G01 X-125.69006 Y59.77048
G01 X-125.77548 Y59.77045
G01 X-125.85961 Y59.78529
G01 X-125.89088 Y59.79367
G01 X-125.92684 Y59.83243
G01 X-125.93644 Y59.84195
G01 X-126.06840 Y60.00680
G01 X-126.07246 Y60.01343
G01 X-126.10947 Y60.06824
G01 X-126.11681 Y60.07815
G01 X-126.16748 Y60.15668
G01 X-126.21152 Y60.23593
G01 X-126.22903 Y60.26570
G01 X-126.24980 Y60.29323
G01 X-126.33822 Y60.40461
G01 X-126.37444 Y60.44459
G01 X-126.42306 Y60.49321
G01 X-126.46304 Y60.52943
G01 X-126.57441 Y60.61785
G01 X-126.60197 Y60.63862
G01 X-126.63169 Y60.65612
G01 X-126.75597 Y60.72519
G01 X-126.80472 Y60.74825
G01 X-126.86834 Y60.77459
G01 X-126.91909 Y60.79275
G01 X-127.05585 Y60.83179
G01 X-127.08922 Y60.84045
G01 X-127.12338 Y60.84523
G01 X-127.26463 Y60.86148
G01 X-127.31851 Y60.86413
G01 X-127.38737 Y60.86413
G01 X-127.44121 Y60.86148
G01 X-127.58249 Y60.84523
G01 X-127.61660 Y60.84045
G01 X-127.65000 Y60.83179
G01 X-127.78676 Y60.79275
G01 X-127.83751 Y60.77459
G01 X-127.90113 Y60.74825
G01 X-127.94988 Y60.72519
G01 X-128.07416 Y60.65612
G01 X-128.10388 Y60.63862
G01 X-128.13143 Y60.61785
G01 X-128.24281 Y60.52943
G01 X-128.28279 Y60.49321
G01 X-128.33141 Y60.44459
G01 X-128.36763 Y60.40461
G01 X-128.45605 Y60.29323
G01 X-128.47680 Y60.26573
G01 X-128.48175 Y60.25765
G01 X-128.49432 Y60.23593
G01 X-128.49664 Y60.23179
G01 X-128.54698 Y60.15379
G01 X-128.59344 Y60.09113
G01 X-128.60672 Y60.07375
G01 X-128.65521 Y60.01216
G01 X-128.73928 Y59.91942
G01 X-128.79999 Y59.86067
G01 X-128.80263 Y59.85204
G01 X-128.82137 Y59.75783
G01 X-128.84058 Y59.56273
G01 X-128.84294 Y59.51472
G01 X-128.84294 Y58.91470
G01 X-128.84058 Y58.86669
G01 X-128.82137 Y58.67160
G01 X-128.80263 Y58.57739
G01 X-128.79999 Y58.56878
G01 X-128.73928 Y58.51003
G01 X-128.65521 Y58.41729
G01 X-128.60672 Y58.35570
G01 X-128.59349 Y58.33837
G01 X-128.54703 Y58.27576
G01 X-128.49653 Y58.19751
G01 X-128.49432 Y58.19352
G01 X-128.47680 Y58.16375
G01 X-128.45605 Y58.13622
G01 X-128.36763 Y58.02484
G01 X-128.33141 Y57.98486
G01 X-128.28279 Y57.93624
G01 X-128.24266 Y57.89987
G01 X-128.19397 Y57.85687
G01 X-128.15206 Y57.81630
G01 X-128.13857 Y57.80292
G01 X-128.08665 Y57.74993
G01 X-128.08262 Y57.74579
G01 X-128.06941 Y57.67325
G01 X-128.05925 Y57.59614
G01 X-128.05318 Y57.50388
G01 X-128.05318 Y54.60615
G01 X-128.05468 Y54.56023
G01 X-128.05724 Y54.52131
G01 X-128.07378 Y54.40790
G01 X-128.09110 Y54.38441
G01 X-128.13847 Y54.32269
G01 X-128.19940 Y54.25314
G01 X-130.92574 Y51.52681
G01 X-130.95932 Y51.49536
G01 X-130.98863 Y51.46968
G01 X-131.08050 Y51.40118
G01 X-131.10941 Y51.39681
G01 X-131.18652 Y51.38665
G01 X-131.27875 Y51.38058
G01 X-134.28141 Y51.38058
G01 X-134.37366 Y51.38665
G01 X-134.45078 Y51.39681
G01 X-134.65436 Y51.45236
G01 X-134.69291 Y51.46833
G01 X-134.70889 Y51.50689
G01 X-134.76444 Y51.71047
G01 X-134.77460 Y51.78759
G01 X-134.78067 Y51.87981
G01 X-134.78067 Y52.84984
G01 X-134.77961 Y52.88850
G01 X-134.77780 Y52.92129
G01 X-134.75758 Y53.05558
G01 X-134.75593 Y53.06226
G01 X-134.71059 Y53.11801
G01 X-134.69002 Y53.14219
G01 X-134.64907 Y53.18830
G01 X-134.64399 Y53.19404
G01 X-134.57303 Y53.27567
G01 X-134.54417 Y53.31502
G01 X-134.50623 Y53.37245
G01 X-134.46927 Y53.43485
G01 X-134.43239 Y53.51080
G01 X-134.40539 Y53.57412
G01 X-134.39261 Y53.60872
G01 X-134.36348 Y53.71347
G01 X-134.36043 Y53.72439
G01 X-134.34524 Y53.79162
G01 X-134.34506 Y53.79279
G01 X-134.33099 Y53.94781
G01 X-134.32870 Y53.98233
G01 X-134.33096 Y54.01682
G01 X-134.34504 Y54.17186
G01 X-134.34524 Y54.17300
G01 X-134.36043 Y54.24026
G01 X-134.39261 Y54.35596
G01 X-134.40539 Y54.39053
G01 X-134.43239 Y54.45385
G01 X-134.46927 Y54.52980
G01 X-134.50623 Y54.59220
G01 X-134.54417 Y54.64963
G01 X-134.57303 Y54.68898
G01 X-134.64399 Y54.77061
G01 X-134.69175 Y54.82035
G01 X-134.70122 Y54.82929
G01 X-134.81357 Y54.91910
G01 X-134.85075 Y54.94686
G01 X-134.87056 Y54.95794
G01 X-135.00866 Y55.03221
G01 X-135.01821 Y55.03724
G01 X-135.07287 Y55.05746
G01 X-135.19840 Y55.09802
G01 X-135.22273 Y55.10371
G01 X-135.29042 Y55.11608
G01 X-135.38590 Y55.12875
G01 X-135.44648 Y55.13173
G01 X-135.51539 Y55.13173
G01 X-135.57595 Y55.12875
G01 X-135.67142 Y55.11608
G01 X-135.73912 Y55.10371
G01 X-135.76345 Y55.09802
G01 X-135.88898 Y55.05746
G01 X-135.95016 Y55.03449
G01 X-135.95352 Y55.03287
G01 X-136.00470 Y55.01072
G01 X-136.07343 Y54.98410
G01 X-136.10007 Y54.97437
G01 X-136.17302 Y54.94928
G01 X-136.27564 Y54.92083
G01 X-136.34099 Y54.90673
G01 X-136.36045 Y54.90231
G01 X-136.38854 Y54.89571
G01 X-136.38997 Y54.89538
G01 X-136.44503 Y54.91542
G01 X-136.51643 Y54.95664
G01 X-136.52293 Y54.96917
G01 X-136.55895 Y55.03848
G01 X-136.59088 Y55.11562
G01 X-136.64645 Y55.31918
G01 X-136.65659 Y55.39629
G01 X-136.66266 Y55.48852
G01 X-136.66266 Y62.44035
G01 X-136.66116 Y62.48625
G01 X-136.65862 Y62.52516
G01 X-136.64206 Y62.63862
G01 X-136.62471 Y62.66217
G01 X-136.57737 Y62.72386
G01 X-136.51646 Y62.79336
G01 X-136.29596 Y63.01385
G01 X-136.26238 Y63.04530
G01 X-136.23307 Y63.07098
G01 X-136.14120 Y63.13948
G01 X-136.11229 Y63.14385
G01 X-136.03518 Y63.15401
G01 X-135.94295 Y63.16008
G01 X-122.95390 Y63.16008
G01 X-122.90798 Y63.15858
G01 X-122.86906 Y63.15602
G01 X-122.75565 Y63.13946
G01 X-122.73216 Y63.12216
G01 X-122.67043 Y63.07481
G01 X-122.60089 Y63.01385
G01 X-121.32639 Y61.73936
G01 X-121.29495 Y61.70580
G01 X-121.26924 Y61.67649
G01 X-121.20079 Y61.58462
G01 X-121.19640 Y61.55569
G01 X-121.18624 Y61.47858
G01 X-121.18017 Y61.38635
G01 X-121.18017 Y61.20405
G01 X-121.18019 Y61.19702
G01 X-121.18027 Y61.19069
G01 X-121.18845 Y61.09044
G01 X-121.20026 Y61.01330
G01 X-121.22665 Y60.89951
G01 X-121.26274 Y60.87589
G01 X-121.30287 Y60.85132
G01 X-121.30595 Y60.84957
G01 X-121.36686 Y60.81073
G01 X-121.36896 Y60.80924
G01 X-121.40788 Y60.78351
G01 X-121.43241 Y60.76842
G01 X-121.46442 Y60.74375
G01 X-121.50234 Y60.71272
G01 X-121.52845 Y60.69026
G01 X-121.55098 Y60.66407
G01 X-121.58202 Y60.62613
G01 X-121.60541 Y60.59588
G01 X-121.62027 Y60.56918
G01 X-121.62368 Y60.56275
G01 X-121.64316 Y60.52585
G01 X-121.66251 Y60.48627
G01 X-121.67293 Y60.46319
G01 X-121.69490 Y60.41863
G01 X-121.69655 Y60.41556
G01 X-121.72530 Y60.35574
G01 X-121.72741 Y60.35082
G01 X-121.74941 Y60.30375
G01 X-121.76914 Y60.26471
G01 X-121.83236 Y60.15701
G01 X-121.84293 Y60.14119
G01 X-121.84290 Y58.29903
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.19225 Y60.09006 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.19225 Y60.09006
G01 X-122.15098 Y60.08462
G01 X-122.06566 Y60.08092
G01 X-121.98100 Y60.09207
G01 X-121.89954 Y60.11775
G01 X-121.84293 Y60.14119
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.25092 Y68.04849 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.25092 Y68.04849
G01 X-114.25348 Y68.05375
G01 X-114.25486 Y68.05489
G01 X-114.30012 Y68.08103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.93187 Y69.40028 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.93187 Y69.40028
G01 X-112.85506 Y69.37440
G01 X-112.81696 Y69.33632
G01 X-112.78468 Y69.30068
G01 X-112.74114 Y69.24765
G01 X-112.68778 Y69.16777
G01 X-112.65544 Y69.10726
G01 X-112.61866 Y69.01852
G01 X-112.61089 Y68.99289
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.57774 Y63.57161 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.57774 Y63.57161
G01 X-112.57089 Y63.50227
G01 X-112.56581 Y63.47674
G01 X-112.49469 Y63.24225
G01 X-112.45791 Y63.15350
G01 X-112.36093 Y62.97205
G01 X-112.36090 Y62.87967
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-109.38090 Y58.02928 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-109.38090 Y58.02928
G01 X-109.38093 Y62.97205
G01 X-109.28395 Y63.15350
G01 X-109.24717 Y63.24225
G01 X-109.17605 Y63.47674
G01 X-109.15730 Y63.57095
G01 X-109.13328 Y63.81482
G01 X-109.13094 Y63.86282
G01 X-109.13089 Y69.20061
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.12272 Y63.28746 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.12272 Y63.28746
G01 X-104.22127 Y63.18891
G01 X-104.23146 Y63.16425
G01 X-104.30270 Y63.01368
G01 X-104.34233 Y62.93938
G01 X-104.42544 Y62.80072
G01 X-104.46460 Y62.74205
G01 X-104.55904 Y62.61472
G01 X-104.59897 Y62.56603
G01 X-104.70443 Y62.44967
G01 X-104.74725 Y62.40684
G01 X-104.86361 Y62.30138
G01 X-104.91228 Y62.26148
G01 X-105.03961 Y62.16702
G01 X-105.09833 Y62.12783
G01 X-105.23702 Y62.04472
G01 X-105.31134 Y62.00504
G01 X-105.46193 Y61.93385
G01 X-105.48650 Y61.92369
G01 X-105.55696 Y61.92366
G01 X-105.71304 Y61.93905
G01 X-105.80725 Y61.95777
G01 X-105.95734 Y62.00332
G01 X-106.04606 Y62.04007
G01 X-106.18439 Y62.11398
G01 X-106.26424 Y62.16737
G01 X-106.34342 Y62.23235
G01 X-106.38548 Y62.26684
G01 X-106.45340 Y62.33479
G01 X-106.55289 Y62.45599
G01 X-106.58842 Y62.50918
G01 X-106.58842 Y63.91340
G01 X-106.55289 Y63.96663
G01 X-106.45340 Y64.08784
G01 X-106.38548 Y64.15576
G01 X-106.34893 Y64.18576
G01 X-106.34893 Y69.89037
G01 X-107.31517 Y70.85661
G01 X-107.40486 Y70.97754
G01 X-107.46277 Y71.04813
G01 X-107.56820 Y71.16449
G01 X-107.63076 Y71.22705
G01 X-107.74712 Y71.33248
G01 X-107.81771 Y71.39039
G01 X-107.93846 Y71.47993
G01 X-107.94560 Y71.48376
G01 X-108.03434 Y71.52052
G01 X-108.18443 Y71.56603
G01 X-108.27864 Y71.58478
G01 X-108.43470 Y71.60015
G01 X-108.53076 Y71.60015
G01 X-108.68685 Y71.58478
G01 X-108.78105 Y71.56603
G01 X-108.93112 Y71.52052
G01 X-109.01986 Y71.48376
G01 X-109.13091 Y71.42440
G01 X-109.14940 Y71.39354
G01 X-109.19645 Y71.30584
G01 X-109.27061 Y71.14899
G01 X-109.29802 Y71.08305
G01 X-109.35413 Y70.92623
G01 X-109.36957 Y70.87548
G01 X-109.40884 Y70.71866
G01 X-109.41699 Y70.67787
G01 X-109.44023 Y70.52103
G01 X-109.44371 Y70.48595
G01 X-109.45141 Y70.32913
G01 X-109.45141 Y70.29593
G01 X-109.44371 Y70.13909
G01 X-109.44023 Y70.10401
G01 X-109.41699 Y69.94719
G01 X-109.40884 Y69.90640
G01 X-109.36957 Y69.74958
G01 X-109.35413 Y69.69883
G01 X-109.29802 Y69.54201
G01 X-109.27061 Y69.47607
G01 X-109.19645 Y69.31923
G01 X-109.14946 Y69.23157
G01 X-109.13089 Y69.20061
G01 X-109.01986 Y69.14127
G01 X-108.93112 Y69.10452
G01 X-108.78105 Y69.05898
G01 X-108.74130 Y69.05108
G01 X-108.68685 Y69.04023
G01 X-108.63493 Y69.03513
G01 X-108.63493 Y64.06038
G01 X-108.71189 Y63.96663
G01 X-108.76526 Y63.88675
G01 X-108.83919 Y63.74845
G01 X-108.87595 Y63.65970
G01 X-108.92147 Y63.50964
G01 X-108.94021 Y63.41540
G01 X-108.95558 Y63.25935
G01 X-108.95558 Y63.16328
G01 X-108.94021 Y63.00720
G01 X-108.92147 Y62.91299
G01 X-108.89619 Y62.82968
G01 X-108.87595 Y62.76293
G01 X-108.83919 Y62.67418
G01 X-108.76526 Y62.53588
G01 X-108.71189 Y62.45599
G01 X-108.61240 Y62.33479
G01 X-108.54448 Y62.26684
G01 X-108.42324 Y62.16737
G01 X-108.34339 Y62.11398
G01 X-108.20506 Y62.04007
G01 X-108.11634 Y62.00332
G01 X-107.96625 Y61.95777
G01 X-107.87204 Y61.93905
G01 X-107.71596 Y61.92366
G01 X-107.61992 Y61.92366
G01 X-107.46384 Y61.93905
G01 X-107.36963 Y61.95777
G01 X-107.21954 Y62.00332
G01 X-107.13082 Y62.04007
G01 X-106.99249 Y62.11398
G01 X-106.91263 Y62.16737
G01 X-106.79140 Y62.26684
G01 X-106.72348 Y62.33479
G01 X-106.62398 Y62.45599
G01 X-106.58842 Y62.50918
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-106.58842 Y63.91340 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-106.58842 Y63.91340
G01 X-106.62398 Y63.96663
G01 X-106.72348 Y64.08784
G01 X-106.79140 Y64.15576
G01 X-106.83343 Y64.19026
G01 X-106.91263 Y64.25525
G01 X-106.95495 Y64.28352
G01 X-106.95495 Y69.62471
G01 X-106.95731 Y69.67274
G01 X-106.96401 Y69.74104
G01 X-106.98276 Y69.83525
G01 X-107.00267 Y69.90089
G01 X-107.03943 Y69.98963
G01 X-107.07179 Y70.05016
G01 X-107.12515 Y70.13002
G01 X-107.16866 Y70.18305
G01 X-107.19975 Y70.21734
G01 X-107.19510 Y70.26449
G01 X-107.19510 Y70.36055
G01 X-107.21047 Y70.51661
G01 X-107.22922 Y70.61082
G01 X-107.27473 Y70.76090
G01 X-107.31149 Y70.84965
G01 X-107.31517 Y70.85661
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-107.93846 Y71.47993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-107.93846 Y71.47993
G01 X-108.33488 Y71.87630
G01 X-108.38192 Y71.87167
G01 X-108.47796 Y71.87167
G01 X-108.63404 Y71.88704
G01 X-108.72825 Y71.90578
G01 X-108.87834 Y71.95130
G01 X-108.96706 Y71.98806
G01 X-109.10539 Y72.06199
G01 X-109.13091 Y72.07906
G01 X-109.16416 Y72.14104
G01 X-109.23833 Y72.29788
G01 X-109.26825 Y72.36989
G01 X-109.32436 Y72.52674
G01 X-109.34153 Y72.58318
G01 X-109.38080 Y72.74000
G01 X-109.38999 Y72.78615
G01 X-109.41326 Y72.94299
G01 X-109.41725 Y72.98325
G01 X-109.42494 Y73.14007
G01 X-109.42494 Y73.17855
G01 X-109.41725 Y73.33537
G01 X-109.41435 Y73.36771
G01 X-109.41024 Y73.37474
G01 X-109.32713 Y73.51343
G01 X-109.30915 Y73.54038
G01 X-109.21471 Y73.66771
G01 X-109.19792 Y73.68815
G01 X-109.09248 Y73.80451
G01 X-109.07511 Y73.82188
G01 X-108.95875 Y73.92732
G01 X-108.93831 Y73.94411
G01 X-108.81098 Y74.03855
G01 X-108.78403 Y74.05653
G01 X-108.64534 Y74.13964
G01 X-108.60729 Y74.15993
G01 X-108.54362 Y74.19006
G01 X-108.45314 Y74.19453
G01 X-108.40673 Y74.19453
G01 X-108.36292 Y74.19237
G01 X-108.33937 Y74.19178
G01 X-108.24941 Y74.19178
G01 X-108.19944 Y74.18930
G01 X-108.09185 Y74.17870
G01 X-108.03960 Y74.17596
G01 X-108.03447 Y74.17591
G01 X-107.97712 Y74.17281
G01 X-107.80821 Y74.15617
G01 X-107.77105 Y74.15168
G01 X-107.72269 Y74.14472
G01 X-107.67788 Y74.13931
G01 X-107.63882 Y74.13545
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-109.13091 Y72.07906 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-109.13091 Y72.07906
G01 X-109.13091 Y71.42440
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.61092 Y69.47760 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.61092 Y69.47760
G01 X-112.61089 Y68.99289
G01 X-112.60469 Y68.95103
G01 X-112.59542 Y68.85717
G01 X-112.59204 Y68.78854
G01 X-112.59093 Y68.74232
G01 X-112.59093 Y63.86282
G01 X-112.58978 Y63.81662
G01 X-112.57774 Y63.57161
G01 X-112.57094 Y63.50265
G01 X-112.57094 Y63.05373
G01 X-112.54450 Y63.03608
G01 X-112.39296 Y62.91172
G01 X-112.36090 Y62.87967
G01 X-112.34071 Y62.83100
G01 X-112.27056 Y62.63494
G01 X-112.24742 Y62.55889
G01 X-112.19829 Y62.36285
G01 X-112.18575 Y62.29991
G01 X-112.15669 Y62.10387
G01 X-112.15120 Y62.04843
G01 X-112.14158 Y61.85239
G01 X-112.14092 Y61.82582
G01 X-112.14092 Y58.35237
G01 X-112.13868 Y58.33731
G01 X-112.13357 Y58.28544
G01 X-112.12154 Y58.04041
G01 X-112.12093 Y58.01582
G01 X-112.12093 Y57.79423
G01 X-112.11869 Y57.74478
G01 X-112.11826 Y57.73993
G01 X-112.11592 Y57.68737
G01 X-112.11592 Y57.53576
G01 X-112.11231 Y57.46340
G01 X-112.10894 Y57.42918
G01 X-112.10647 Y57.39835
G01 X-112.11686 Y57.35085
G01 X-112.16322 Y57.16581
G01 X-112.17635 Y57.10477
G01 X-112.18966 Y57.03111
G01 X-112.17363 Y56.97831
G01 X-112.12837 Y56.89357
G01 X-112.06741 Y56.81933
G01 X-111.99316 Y56.75839
G01 X-111.96593 Y56.74384
G01 X-111.90845 Y56.71310
G01 X-111.81653 Y56.68522
G01 X-111.72093 Y56.67582
G01 X-111.51453 Y56.67582
G01 X-111.48460 Y56.65982
G01 X-111.39586 Y56.62306
G01 X-111.20825 Y56.56614
G01 X-111.11404 Y56.54740
G01 X-110.91895 Y56.52819
G01 X-110.88199 Y56.52819
G01 X-110.82517 Y56.55166
G01 X-110.63696 Y56.64069
G01 X-110.56746 Y56.67777
G01 X-110.39413 Y56.78166
G01 X-110.34122 Y56.81697
G01 X-110.27498 Y56.86611
G01 X-110.02093 Y56.97135
G01 X-109.82644 Y57.16583
G01 X-109.72121 Y57.41986
G01 X-109.67204 Y57.48615
G01 X-109.63673 Y57.53906
G01 X-109.53284 Y57.71239
G01 X-109.49576 Y57.78189
G01 X-109.40673 Y57.97007
G01 X-109.38646 Y58.01582
G01 X-109.38090 Y58.02928
G01 X-105.48650 Y61.92369
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.22617 Y63.30903 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.22617 Y63.30903
G01 X-104.22130 Y63.25935
G01 X-104.22127 Y63.18891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.32912 Y59.96466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.32912 Y59.96466
G01 X-103.21840 Y59.07541
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.32910 Y58.80383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.32910 Y58.80383
G01 X-102.36862 Y58.83627
G01 X-102.44850 Y58.88963
G01 X-102.58681 Y58.96357
G01 X-102.67555 Y59.00032
G01 X-102.82562 Y59.04584
G01 X-102.91983 Y59.06459
G01 X-103.07591 Y59.07995
G01 X-103.17197 Y59.07995
G01 X-103.21840 Y59.07541
G01 X-103.32422 Y59.02534
G01 X-103.40319 Y58.98320
G01 X-103.54187 Y58.90010
G01 X-103.60469 Y58.85816
G01 X-103.73204 Y58.76372
G01 X-103.78442 Y58.72077
G01 X-103.90075 Y58.61531
G01 X-103.94690 Y58.56916
G01 X-104.05236 Y58.45283
G01 X-104.09531 Y58.40045
G01 X-104.18975 Y58.27310
G01 X-104.23166 Y58.21033
G01 X-104.31477 Y58.07165
G01 X-104.35698 Y57.99255
G01 X-104.40700 Y57.88681
G01 X-104.65503 Y57.63876
G01 X-104.65505 Y57.63876
G01 X-104.87217 Y57.55067
G01 X-104.94131 Y57.51074
G01 X-105.05909 Y57.42664
G01 X-105.08838 Y57.40094
G01 X-105.12196 Y57.36949
G01 X-110.11582 Y52.37560
G01 X-110.22906 Y52.27298
G01 X-110.27658 Y52.22546
G01 X-110.37920 Y52.11222
G01 X-112.03347 Y50.45795
G01 X-112.09433 Y50.38856
G01 X-112.14170 Y50.32683
G01 X-112.24643 Y50.14352
G01 X-112.27838 Y50.06636
G01 X-112.28267 Y50.05584
G01 X-112.20998 Y49.95295
G01 X-112.15951 Y49.89092
G01 X-112.15443 Y49.88475
G01 X-112.10812 Y49.82899
G01 X-112.05471 Y49.77139
G01 X-112.04889 Y49.76575
G01 X-112.00701 Y49.72160
G01 X-111.93604 Y49.63997
G01 X-111.90718 Y49.60065
G01 X-111.86926 Y49.54324
G01 X-111.83228 Y49.48081
G01 X-111.79540 Y49.40489
G01 X-111.76837 Y49.34152
G01 X-111.75560 Y49.30695
G01 X-111.72344 Y49.19128
G01 X-111.70823 Y49.12397
G01 X-111.70802 Y49.12287
G01 X-111.69398 Y48.96778
G01 X-111.69187 Y48.93687
G01 X-111.69009 Y48.89849
G01 X-111.68532 Y48.84246
G01 X-111.67952 Y48.79582
G01 X-111.66238 Y48.76875
G01 X-111.58524 Y48.66765
G01 X-111.56723 Y48.64794
G01 X-111.54551 Y48.62521
G01 X-110.25611 Y47.33581
G01 X-110.18656 Y47.27487
G01 X-110.12484 Y47.22750
G01 X-110.10135 Y47.21018
G01 X-109.98794 Y47.19364
G01 X-109.94902 Y47.19108
G01 X-109.90310 Y47.18958
G01 X-108.57554 Y47.18958
G01 X-108.48332 Y47.19565
G01 X-108.40620 Y47.20581
G01 X-108.20272 Y47.26133
G01 X-108.17953 Y47.27093
G01 X-108.15718 Y47.32488
G01 X-108.11250 Y47.46814
G01 X-108.10808 Y47.48932
G01 X-108.10552 Y47.50103
G01 X-108.09678 Y47.53964
G01 X-108.06848 Y47.63360
G01 X-108.02464 Y47.70614
G01 X-107.96470 Y47.76608
G01 X-107.95309 Y47.77390
G01 X-107.89223 Y47.80987
G01 X-107.89063 Y47.81048
G01 X-107.80610 Y47.83636
G01 X-107.78863 Y47.83840
G01 X-107.74791 Y47.83959
G01 X-105.74794 Y47.83959
G01 X-105.70725 Y47.83840
G01 X-105.68970 Y47.83636
G01 X-105.60364 Y47.80990
G01 X-105.53112 Y47.76606
G01 X-105.47121 Y47.70614
G01 X-105.42737 Y47.63360
G01 X-105.40090 Y47.54746
G01 X-105.39884 Y47.52999
G01 X-105.39767 Y47.48935
G01 X-105.39767 Y45.48933
G01 X-105.39884 Y45.44866
G01 X-105.40090 Y45.43116
G01 X-105.41642 Y45.37604
G01 X-105.42737 Y45.34506
G01 X-105.47118 Y45.27254
G01 X-105.53112 Y45.21259
G01 X-105.60364 Y45.16875
G01 X-105.68975 Y45.14229
G01 X-105.70722 Y45.14026
G01 X-105.74794 Y45.13909
G01 X-107.74791 Y45.13909
G01 X-107.78863 Y45.14026
G01 X-107.80610 Y45.14229
G01 X-107.89221 Y45.16875
G01 X-107.96472 Y45.21259
G01 X-108.02464 Y45.27251
G01 X-108.06848 Y45.34506
G01 X-108.09678 Y45.43901
G01 X-108.10818 Y45.48933
G01 X-108.11936 Y45.53263
G01 X-108.14169 Y45.60977
G01 X-108.17752 Y45.70972
G01 X-108.29215 Y45.74686
G01 X-108.36929 Y45.76588
G01 X-108.50386 Y45.78618
G01 X-108.53681 Y45.78801
G01 X-108.57554 Y45.78907
G01 X-110.39995 Y45.78907
G01 X-110.43439 Y45.78991
G01 X-110.46863 Y45.79161
G01 X-110.50267 Y45.79664
G01 X-110.57010 Y45.81008
G01 X-110.60350 Y45.81844
G01 X-110.61392 Y45.82217
G01 X-110.63589 Y45.82961
G01 X-110.70188 Y45.85077
G01 X-110.70226 Y45.85090
G01 X-110.76863 Y45.87223
G01 X-110.77648 Y45.87482
G01 X-110.84198 Y45.89667
G01 X-110.91387 Y45.91724
G01 X-110.96070 Y45.92854
G01 X-111.00360 Y45.93799
G01 X-111.04468 Y45.94615
G01 X-111.08377 Y45.92997
G01 X-111.15956 Y45.89052
G01 X-111.22735 Y45.83850
G01 X-111.28509 Y45.77548
G01 X-111.33203 Y45.71430
G01 X-111.37787 Y45.64231
G01 X-111.41054 Y45.56344
G01 X-111.42903 Y45.48011
G01 X-111.42972 Y45.47472
G01 X-111.40401 Y45.39900
G01 X-111.30449 Y45.19410
G01 X-111.26081 Y45.12872
G01 X-111.18791 Y45.03675
G01 X-111.17457 Y45.02250
G01 X-111.15862 Y45.00602
G01 X-110.96891 Y44.81633
G01 X-110.94516 Y44.79136
G01 X-110.91029 Y44.75291
G01 X-110.85209 Y44.67754
G01 X-110.81267 Y44.62100
G01 X-110.80808 Y44.61364
G01 X-110.74404 Y44.49098
G01 X-110.72885 Y44.46002
G01 X-110.71773 Y44.42740
G01 X-110.67625 Y44.29537
G01 X-110.67429 Y44.28692
G01 X-110.66218 Y44.21900
G01 X-110.65006 Y44.12466
G01 X-110.64752 Y44.07269
G01 X-110.64668 Y44.03830
G01 X-110.64668 Y40.93485
G01 X-110.64059 Y40.84263
G01 X-110.63045 Y40.76551
G01 X-110.62606 Y40.73661
G01 X-110.55758 Y40.64473
G01 X-110.53188 Y40.61542
G01 X-110.50046 Y40.58184
G01 X-105.66943 Y35.75082
G01 X-105.59988 Y35.68988
G01 X-105.53816 Y35.64251
G01 X-105.35498 Y35.53789
G01 X-105.27786 Y35.50596
G01 X-105.20664 Y35.48569
G01 X-104.76476 Y35.04378
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.42396 Y34.70299 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.42396 Y34.70299
G01 X-104.42371 Y34.70279
G01 X-104.37537 Y34.67050
G01 X-104.23707 Y34.59656
G01 X-104.14832 Y34.55981
G01 X-103.99826 Y34.51429
G01 X-103.90403 Y34.49555
G01 X-103.74797 Y34.48018
G01 X-103.65191 Y34.48018
G01 X-103.57718 Y34.48755
G01 X-103.49585 Y34.49555
G01 X-103.40161 Y34.51429
G01 X-103.25155 Y34.55981
G01 X-103.16280 Y34.59656
G01 X-103.02450 Y34.67050
G01 X-102.94462 Y34.72387
G01 X-102.82341 Y34.82336
G01 X-102.75549 Y34.89128
G01 X-102.65600 Y35.01251
G01 X-102.60263 Y35.09237
G01 X-102.52869 Y35.23067
G01 X-102.49194 Y35.31942
G01 X-102.44640 Y35.46951
G01 X-102.42768 Y35.56372
G01 X-102.41231 Y35.71978
G01 X-102.41231 Y35.81584
G01 X-102.42768 Y35.97192
G01 X-102.44640 Y36.06613
G01 X-102.49194 Y36.21619
G01 X-102.52869 Y36.30494
G01 X-102.60263 Y36.44324
G01 X-102.65600 Y36.52313
G01 X-102.70992 Y36.58884
G01 X-102.70992 Y38.59932
G01 X-102.71228 Y38.64735
G01 X-102.72188 Y38.74492
G01 X-102.74063 Y38.83912
G01 X-102.76908 Y38.93293
G01 X-102.80583 Y39.02167
G01 X-102.85206 Y39.10811
G01 X-102.90542 Y39.18797
G01 X-102.96760 Y39.26374
G01 X-102.99989 Y39.29937
G01 X-103.26374 Y39.56323
G01 X-103.33334 Y39.58192
G01 X-103.41050 Y39.61388
G01 X-103.59369 Y39.71850
G01 X-103.65541 Y39.76584
G01 X-103.72496 Y39.82680
G01 X-105.26341 Y41.36526
G01 X-105.28609 Y41.38903
G01 X-105.30484 Y41.40963
G01 X-105.37971 Y41.50762
G01 X-105.38076 Y41.51283
G01 X-105.38340 Y41.52520
G01 X-105.39742 Y41.58870
G01 X-105.41152 Y41.68078
G01 X-105.41238 Y41.69063
G01 X-105.41698 Y41.71888
G01 X-105.43138 Y41.78631
G01 X-105.45815 Y41.88715
G01 X-105.48827 Y41.97389
G01 X-105.51400 Y42.03770
G01 X-105.53133 Y42.07519
G01 X-105.60654 Y42.21054
G01 X-105.63079 Y42.25095
G01 X-105.64433 Y42.26823
G01 X-105.75757 Y42.40821
G01 X-105.76854 Y42.41986
G01 X-105.81819 Y42.46769
G01 X-105.90633 Y42.54463
G01 X-105.96971 Y42.59210
G01 X-106.02678 Y42.63061
G01 X-106.07291 Y42.65855
G01 X-106.19970 Y42.72294
G01 X-106.25406 Y42.74768
G01 X-106.26290 Y42.75045
G01 X-106.44720 Y42.80683
G01 X-106.45043 Y42.80757
G01 X-106.51845 Y42.81946
G01 X-106.64705 Y42.83546
G01 X-106.71354 Y42.83874
G01 X-106.78230 Y42.83874
G01 X-106.84880 Y42.83546
G01 X-106.97740 Y42.81946
G01 X-107.04542 Y42.80757
G01 X-107.04862 Y42.80683
G01 X-107.23295 Y42.75045
G01 X-107.24179 Y42.74768
G01 X-107.29614 Y42.72294
G01 X-107.42297 Y42.65852
G01 X-107.46907 Y42.63061
G01 X-107.52614 Y42.59210
G01 X-107.58951 Y42.54465
G01 X-107.67765 Y42.46769
G01 X-107.72731 Y42.41986
G01 X-107.73828 Y42.40821
G01 X-107.77613 Y42.36144
G01 X-107.85152 Y42.26823
G01 X-107.86505 Y42.25095
G01 X-107.88931 Y42.21054
G01 X-107.96452 Y42.07521
G01 X-107.98184 Y42.03770
G01 X-108.00757 Y41.97389
G01 X-108.03770 Y41.88718
G01 X-108.06447 Y41.78631
G01 X-108.07887 Y41.71888
G01 X-108.08347 Y41.69060
G01 X-108.09792 Y41.52378
G01 X-108.10005 Y41.48939
G01 X-108.09792 Y41.45487
G01 X-108.08347 Y41.28802
G01 X-108.07887 Y41.25977
G01 X-108.06447 Y41.19233
G01 X-108.03770 Y41.09150
G01 X-108.00757 Y41.00475
G01 X-107.98184 Y40.94095
G01 X-107.96452 Y40.90346
G01 X-107.88931 Y40.76810
G01 X-107.86505 Y40.72769
G01 X-107.85152 Y40.71042
G01 X-107.73828 Y40.57044
G01 X-107.72731 Y40.55878
G01 X-107.67765 Y40.51095
G01 X-107.58951 Y40.43402
G01 X-107.52614 Y40.38654
G01 X-107.46907 Y40.34804
G01 X-107.42294 Y40.32010
G01 X-107.29614 Y40.25571
G01 X-107.24179 Y40.23097
G01 X-107.23290 Y40.22817
G01 X-107.04862 Y40.17181
G01 X-107.04537 Y40.17108
G01 X-106.97745 Y40.15921
G01 X-106.84880 Y40.14319
G01 X-106.78235 Y40.13991
G01 X-106.71349 Y40.13991
G01 X-106.64893 Y40.14308
G01 X-106.60217 Y40.14385
G01 X-106.56300 Y40.14321
G01 X-106.51659 Y40.14100
G01 X-106.47976 Y40.13808
G01 X-106.42708 Y40.10112
G01 X-106.36539 Y40.05378
G01 X-106.29589 Y39.99287
G01 X-104.69638 Y38.39335
G01 X-104.66503 Y38.35990
G01 X-104.63936 Y38.33062
G01 X-104.57080 Y38.23864
G01 X-104.56641 Y38.20969
G01 X-104.55625 Y38.13255
G01 X-104.55018 Y38.04032
G01 X-104.55018 Y36.71807
G01 X-104.55025 Y36.70832
G01 X-104.55035 Y36.70011
G01 X-104.55924 Y36.59793
G01 X-104.56768 Y36.54512
G01 X-104.57956 Y36.52343
G01 X-104.63008 Y36.44413
G01 X-104.63666 Y36.43514
G01 X-104.67459 Y36.37774
G01 X-104.71159 Y36.31530
G01 X-104.74845 Y36.23938
G01 X-104.77547 Y36.17601
G01 X-104.78825 Y36.14142
G01 X-104.82043 Y36.02577
G01 X-104.83133 Y35.98086
G01 X-104.83181 Y35.97858
G01 X-104.83595 Y35.95851
G01 X-104.85592 Y35.88256
G01 X-104.88005 Y35.80743
G01 X-104.90585 Y35.72785
G01 X-104.96862 Y35.57845
G01 X-104.97283 Y35.57020
G01 X-104.97220 Y35.56372
G01 X-104.95348 Y35.46951
G01 X-104.90794 Y35.31942
G01 X-104.87118 Y35.23067
G01 X-104.79724 Y35.09237
G01 X-104.76496 Y35.04403
G01 X-104.76476 Y35.04378
G01 X-104.74103 Y35.01488
G01 X-104.63557 Y34.89852
G01 X-104.56923 Y34.83217
G01 X-104.45287 Y34.72671
G01 X-104.42396 Y34.70299
G01 X-102.93504 Y33.21407
G01 X-101.26939 Y34.87972
G01 X-100.95597 Y35.19311
G01 X-100.95597 Y35.19313
G01 X-100.86852 Y35.21272
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.42694 Y32.34628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.42694 Y32.34628
G01 X-101.74711 Y32.02613
G01 X-101.42692 Y31.70594
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-103.08391 Y29.40181 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-103.08391 Y29.40181
G01 X-103.01630 Y29.43782
G01 X-103.00116 Y29.44590
G01 X-102.96085 Y29.51572
G01 X-102.93164 Y29.59599
G01 X-102.91167 Y29.67049
G01 X-102.91007 Y29.67953
G01 X-102.91165 Y29.68344
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-105.20661 Y35.48566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-105.20661 Y35.48566
G01 X-105.18487 Y35.47949
G01 X-105.11030 Y35.49946
G01 X-105.03290 Y35.53555
G01 X-104.97283 Y35.57020
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-103.26372 Y39.56320 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-103.26372 Y39.56320
G01 X-103.23756 Y39.55619
G01 X-103.16575 Y39.57545
G01 X-103.08833 Y39.61154
G01 X-103.02155 Y39.65010
G01 X-102.96364 Y39.69066
G01 X-102.95094 Y39.72068
G01 X-102.89270 Y39.85850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.73291 Y44.70571 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.73291 Y44.70571
G01 X-102.73291 Y45.06538
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.49341 Y44.82585 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.49341 Y44.82585
G01 X-102.73291 Y45.06538
G01 X-102.78757 Y45.19735
G01 X-102.83817 Y45.30033
G01 X-102.87807 Y45.36946
G01 X-102.93910 Y45.45953
G01 X-102.94924 Y45.47239
G01 X-102.95701 Y45.48237
G01 X-102.96057 Y45.48714
G01 X-102.98709 Y45.52286
G01 X-103.00151 Y45.54231
G01 X-103.03977 Y45.59959
G01 X-103.05742 Y45.62905
G01 X-103.07212 Y45.66009
G01 X-103.09846 Y45.72369
G01 X-103.11002 Y45.75603
G01 X-103.11838 Y45.78935
G01 X-103.13179 Y45.85679
G01 X-103.13684 Y45.89083
G01 X-103.13852 Y45.92506
G01 X-103.13938 Y45.95951
G01 X-103.13938 Y53.59155
G01 X-103.14411 Y53.67311
G01 X-103.15208 Y53.74156
G01 X-103.16717 Y53.82723
G01 X-103.27911 Y54.30137
G01 X-103.75599 Y55.25512
G01 X-104.12993 Y56.00300
G01 X-104.12993 Y56.99075
G01 X-104.13913 Y57.01646
G01 X-104.15188 Y57.05016
G01 X-104.18487 Y57.13292
G01 X-104.18599 Y57.13574
G01 X-104.21340 Y57.20510
G01 X-104.24746 Y57.28072
G01 X-104.28657 Y57.35763
G01 X-104.31751 Y57.41348
G01 X-104.35841 Y57.48168
G01 X-104.36773 Y57.49692
G01 X-104.38287 Y57.52121
G01 X-104.41345 Y57.54694
G01 X-104.48739 Y57.58961
G01 X-104.56760 Y57.61879
G01 X-104.64210 Y57.63876
G01 X-104.65114 Y57.64036
G01 X-104.65503 Y57.63876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.40700 Y57.88681 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.40700 Y57.88681
G01 X-104.41157 Y57.84033
G01 X-104.41157 Y57.74429
G01 X-104.39620 Y57.58821
G01 X-104.38287 Y57.52121
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.12993 Y56.99075 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.12993 Y56.99075
G01 X-104.06839 Y56.91577
G01 X-104.00047 Y56.84785
G01 X-103.87924 Y56.74836
G01 X-103.79938 Y56.69499
G01 X-103.70705 Y56.64564
G01 X-103.66107 Y56.62106
G01 X-103.57233 Y56.58430
G01 X-103.42224 Y56.53878
G01 X-103.32803 Y56.52004
G01 X-103.27911 Y56.51521
G01 X-103.27911 Y54.30137
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.74912 Y50.14662 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.74912 Y50.14662
G01 X-98.68006 Y50.10971
G01 X-98.59134 Y50.07296
G01 X-98.44125 Y50.02744
G01 X-98.36332 Y50.01192
G01 X-98.34704 Y50.00870
G01 X-98.19096 Y49.99333
G01 X-98.09492 Y49.99333
G01 X-98.08311 Y49.99447
G01 X-98.08311 Y49.77304
G01 X-98.13873 Y49.76755
G01 X-98.23066 Y49.73966
G01 X-98.31537 Y49.69437
G01 X-98.38961 Y49.63344
G01 X-98.45057 Y49.55919
G01 X-98.49583 Y49.47449
G01 X-98.52372 Y49.38256
G01 X-98.53314 Y49.28696
G01 X-98.53309 Y48.43367
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.22042 Y45.26832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.22042 Y45.26832
G01 X-97.75242 Y45.26832
G01 X-94.63686 Y42.15281
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.35517 Y46.24698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.35517 Y46.24698
G01 X-96.19106 Y46.24698
G01 X-92.09684 Y42.15281
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.65736 Y39.17331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.65736 Y39.17331
G01 X-92.06803 Y39.58395
G01 X-92.11510 Y39.57933
G01 X-92.21116 Y39.57933
G01 X-92.22927 Y39.58111
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.76930 Y39.58111 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.76930 Y39.58111
G01 X-94.75116 Y39.57933
G01 X-94.65510 Y39.57933
G01 X-94.60803 Y39.58395
G01 X-93.20936 Y38.18530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.60877 Y36.51629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.60877 Y36.51629
G01 X-93.62531 Y36.40667
G01 X-93.64276 Y36.32254
G01 X-93.66026 Y36.25379
G01 X-93.67837 Y36.19410
G01 X-93.68675 Y36.16826
G01 X-93.70941 Y36.10260
G01 X-93.71459 Y36.08810
G01 X-93.72205 Y36.06791
G01 X-93.75421 Y35.95231
G01 X-93.76943 Y35.88495
G01 X-93.76960 Y35.88386
G01 X-93.78367 Y35.72877
G01 X-93.78594 Y35.69433
G01 X-93.78367 Y35.65986
G01 X-93.76960 Y35.50479
G01 X-93.76943 Y35.50370
G01 X-93.75421 Y35.43634
G01 X-93.72203 Y35.32069
G01 X-93.70925 Y35.28607
G01 X-93.68225 Y35.22280
G01 X-93.64540 Y35.14685
G01 X-93.60841 Y35.08445
G01 X-93.57047 Y35.02702
G01 X-93.54161 Y34.98770
G01 X-93.47065 Y34.90604
G01 X-93.42289 Y34.85630
G01 X-93.41342 Y34.84736
G01 X-93.33844 Y34.78742
G01 X-93.30209 Y34.75628
G01 X-93.30077 Y34.75508
G01 X-93.27992 Y34.73667
G01 X-93.24865 Y34.71018
G01 X-93.19605 Y34.66113
G01 X-93.18464 Y34.60360
G01 X-93.17496 Y34.54241
G01 X-93.16618 Y34.43154
G01 X-93.16618 Y33.93921
G01 X-93.17344 Y33.83837
G01 X-93.18149 Y33.78247
G01 X-93.25485 Y33.54536
G01 X-93.28393 Y33.48420
G01 X-93.30560 Y33.44386
G01 X-93.35574 Y33.41107
G01 X-93.45124 Y33.37404
G01 X-93.55236 Y33.35768
G01 X-93.61344 Y33.35427
G01 X-93.71573 Y33.35930
G01 X-93.81474 Y33.38547
G01 X-93.90615 Y33.43164
G01 X-93.95759 Y33.46479
G01 X-94.01880 Y33.51142
G01 X-94.04263 Y33.53637
G01 X-94.12792 Y33.60591
G01 X-94.12792 Y33.57713
G01 X-94.07146 Y33.53080
G01 X-94.01052 Y33.45653
G01 X-93.96523 Y33.37183
G01 X-93.93734 Y33.27990
G01 X-93.92795 Y33.18432
G01 X-93.92795 Y31.60432
G01 X-93.97290 Y31.55936
G01 X-94.01263 Y31.51768
G01 X-94.06150 Y31.46378
G01 X-94.11471 Y31.39919
G01 X-94.12574 Y31.38430
G01 X-94.15525 Y31.34719
G01 X-94.19127 Y31.30515
G01 X-94.23056 Y31.26426
G01 X-94.26254 Y31.23470
G01 X-94.30437 Y31.20066
G01 X-94.33983 Y31.17531
G01 X-94.38794 Y31.14508
G01 X-94.41794 Y31.12855
G01 X-94.43661 Y31.11778
G01 X-94.45159 Y31.10879
G01 X-94.46135 Y31.06987
G01 X-94.47156 Y31.01874
G01 X-94.47956 Y30.96482
G01 X-94.48428 Y30.91676
G01 X-94.48695 Y30.86286
G01 X-94.48753 Y30.83932
G01 X-94.48753 Y29.58931
G01 X-94.48695 Y29.56579
G01 X-94.48428 Y29.51189
G01 X-94.47956 Y29.46383
G01 X-94.47156 Y29.40991
G01 X-94.46135 Y29.35878
G01 X-94.44783 Y29.30485
G01 X-94.43074 Y29.24857
G01 X-94.41146 Y29.19467
G01 X-94.38753 Y29.13627
G01 X-94.38753 Y28.79167
G01 X-94.38670 Y28.75830
G01 X-94.38332 Y28.68969
G01 X-94.37661 Y28.62167
G01 X-94.36914 Y28.57135
G01 X-94.36643 Y28.55306
G01 X-94.36516 Y28.54476
G01 X-94.32726 Y28.49424
G01 X-94.29719 Y28.45759
G01 X-94.28322 Y28.43998
G01 X-94.25680 Y28.40554
G01 X-94.24329 Y28.38847
G01 X-94.19975 Y28.33544
G01 X-94.17865 Y28.31098
G01 X-94.15568 Y28.28565
G01 X-94.11387 Y28.23468
G01 X-94.01944 Y28.10735
G01 X-93.97852 Y28.04606
G01 X-93.89541 Y27.90737
G01 X-93.85419 Y27.83010
G01 X-93.80714 Y27.73064
G01 X-93.80714 Y27.41532
G01 X-93.79066 Y27.33257
G01 X-93.74514 Y27.18248
G01 X-93.70839 Y27.09373
G01 X-93.63445 Y26.95543
G01 X-93.59538 Y26.89696
G01 X-93.56699 Y26.88715
G01 X-93.40671 Y26.81578
G01 X-93.33895 Y26.77745
G01 X-93.33724 Y26.77651
G01 X-93.28329 Y26.74580
G01 X-93.20461 Y26.69394
G01 X-93.19046 Y26.68319
G01 X-93.16724 Y26.66633
G01 X-93.14753 Y26.65530
G01 X-93.00941 Y26.58101
G01 X-92.99986 Y26.57595
G01 X-92.94517 Y26.55576
G01 X-92.93316 Y26.55185
G01 X-92.78896 Y26.53049
G01 X-92.72490 Y26.52416
G01 X-92.56808 Y26.51644
G01 X-92.50618 Y26.51644
G01 X-92.34934 Y26.52416
G01 X-92.28528 Y26.53049
G01 X-92.14108 Y26.55190
G01 X-92.12907 Y26.55576
G01 X-92.07443 Y26.57595
G01 X-92.06488 Y26.58098
G01 X-92.02058 Y26.60483
G01 X-92.02033 Y26.60499
G01 X-91.92673 Y26.65530
G01 X-91.90689 Y26.66638
G01 X-91.86973 Y26.69411
G01 X-91.84936 Y26.71042
G01 X-91.75742 Y26.78390
G01 X-91.74792 Y26.79287
G01 X-91.70021 Y26.84260
G01 X-91.62925 Y26.92424
G01 X-91.60039 Y26.96356
G01 X-91.56247 Y27.02096
G01 X-91.52546 Y27.08340
G01 X-91.49836 Y27.13922
G01 X-91.48828 Y27.15914
G01 X-91.46013 Y27.21271
G01 X-91.45587 Y27.22096
G01 X-91.43885 Y27.25436
G01 X-91.37382 Y27.35992
G01 X-91.32107 Y27.43231
G01 X-91.31015 Y27.44705
G01 X-91.26687 Y27.50425
G01 X-91.25637 Y27.51705
G01 X-91.25630 Y27.51705
G01 X-91.17179 Y27.54037
G01 X-91.06953 Y27.54649
G01 X-90.96824 Y27.53125
G01 X-90.90903 Y27.51583
G01 X-90.81312 Y27.47984
G01 X-90.72678 Y27.42467
G01 X-90.65381 Y27.35279
G01 X-90.61495 Y27.30552
G01 X-90.57093 Y27.24253
G01 X-90.53733 Y27.17336
G01 X-90.49491 Y27.06531
G01 X-90.40565 Y26.91073
G01 X-90.38927 Y26.87986
G01 X-90.38312 Y26.86722
G01 X-90.35518 Y26.79208
G01 X-90.28317 Y26.79208
G01 X-90.35528 Y26.87994
G01 X-90.40865 Y26.95982
G01 X-90.48259 Y27.09813
G01 X-90.51934 Y27.18687
G01 X-90.56486 Y27.33696
G01 X-90.58361 Y27.43120
G01 X-90.59897 Y27.58725
G01 X-90.59897 Y27.68329
G01 X-90.58361 Y27.83938
G01 X-90.56486 Y27.93361
G01 X-90.51934 Y28.08365
G01 X-90.48259 Y28.17239
G01 X-90.40865 Y28.31070
G01 X-90.35528 Y28.39058
G01 X-90.25579 Y28.51179
G01 X-90.18787 Y28.57973
G01 X-90.15132 Y28.60973
G01 X-90.15132 Y28.64296
G01 X-90.27431 Y28.52883
G01 X-90.39671 Y28.37534
G01 X-90.49488 Y28.20529
G01 X-90.53910 Y28.09259
G01 X-90.59341 Y27.99117
G01 X-90.61975 Y27.95342
G01 X-90.67738 Y27.88507
G01 X-90.74647 Y27.82838
G01 X-90.82470 Y27.78515
G01 X-90.88073 Y27.76053
G01 X-90.93786 Y27.74235
G01 X-90.97837 Y27.72939
G01 X-91.08033 Y27.71923
G01 X-91.18221 Y27.73056
G01 X-91.24197 Y27.74359
G01 X-91.25622 Y27.74834
G01 X-91.32097 Y27.82944
G01 X-91.37245 Y27.90219
G01 X-91.41728 Y27.97303
G01 X-91.44792 Y28.02772
G01 X-91.45521 Y28.04100
G01 X-91.48815 Y28.10270
G01 X-91.50032 Y28.12660
G01 X-91.52546 Y28.17831
G01 X-91.56247 Y28.24080
G01 X-91.60039 Y28.29823
G01 X-91.62925 Y28.33752
G01 X-91.70021 Y28.41916
G01 X-91.74792 Y28.46889
G01 X-91.75744 Y28.47786
G01 X-91.86973 Y28.56764
G01 X-91.90695 Y28.59541
G01 X-91.92678 Y28.60651
G01 X-92.06491 Y28.68078
G01 X-92.07438 Y28.68578
G01 X-92.12902 Y28.70597
G01 X-92.25459 Y28.74659
G01 X-92.27885 Y28.75225
G01 X-92.34667 Y28.76465
G01 X-92.46117 Y28.77984
G01 X-92.50219 Y28.78568
G01 X-92.53554 Y28.79144
G01 X-92.57319 Y28.79696
G01 X-92.58601 Y28.79848
G01 X-92.66831 Y28.81291
G01 X-92.76971 Y28.90856
G01 X-92.81035 Y28.95446
G01 X-92.91642 Y29.10628
G01 X-92.90913 Y29.13297
G01 X-92.89404 Y29.18253
G01 X-92.89198 Y29.18862
G01 X-92.87532 Y29.24443
G01 X-92.87042 Y29.26338
G01 X-92.85467 Y29.31608
G01 X-92.84161 Y29.35438
G01 X-92.83280 Y29.38217
G01 X-92.81756 Y29.43389
G01 X-92.80547 Y29.48093
G01 X-92.80326 Y29.50122
G01 X-92.80044 Y29.53137
G01 X-92.79884 Y29.54841
G01 X-92.79851 Y29.55492
G01 X-92.79767 Y29.58931
G01 X-92.79767 Y30.58481
G01 X-92.79549 Y30.64000
G01 X-92.79305 Y30.67099
G01 X-92.75970 Y30.83932
G01 X-92.75805 Y30.84458
G01 X-92.74802 Y30.87871
G01 X-92.74027 Y30.90726
G01 X-92.73242 Y30.93442
G01 X-92.72648 Y30.95390
G01 X-92.70293 Y30.96360
G01 X-92.52066 Y31.01557
G01 X-92.45947 Y31.02527
G01 X-92.34845 Y31.03406
G01 X-92.15292 Y31.03406
G01 X-92.11853 Y31.03492
G01 X-92.11192 Y31.03525
G01 X-92.06483 Y31.03965
G01 X-92.04451 Y31.04186
G01 X-91.99734 Y31.05400
G01 X-91.99016 Y31.05611
G01 X-91.94563 Y31.06926
G01 X-91.92041 Y31.07721
G01 X-91.88241 Y31.09583
G01 X-91.83473 Y31.12103
G01 X-91.80796 Y31.13591
G01 X-91.77753 Y31.15946
G01 X-91.73580 Y31.19360
G01 X-91.70969 Y31.21605
G01 X-91.68718 Y31.24224
G01 X-91.65305 Y31.28395
G01 X-91.62950 Y31.31440
G01 X-91.61469 Y31.34099
G01 X-91.58950 Y31.38867
G01 X-91.57901 Y31.40935
G01 X-91.57080 Y31.42682
G01 X-91.56280 Y31.45217
G01 X-91.54756 Y31.50388
G01 X-91.53544 Y31.55095
G01 X-91.53326 Y31.57122
G01 X-91.52884 Y31.61834
G01 X-91.52851 Y31.62492
G01 X-91.52767 Y31.65931
G01 X-91.52767 Y32.90932
G01 X-91.52851 Y32.94373
G01 X-91.52884 Y32.95031
G01 X-91.53326 Y32.99743
G01 X-91.53544 Y33.01770
G01 X-91.54756 Y33.06477
G01 X-91.56280 Y33.11648
G01 X-91.57080 Y33.14185
G01 X-91.58950 Y33.17998
G01 X-91.61469 Y33.22766
G01 X-91.62953 Y33.25427
G01 X-91.65300 Y33.28463
G01 X-91.66514 Y33.29946
G01 X-91.67080 Y33.30650
G01 X-91.67423 Y33.31081
G01 X-91.68660 Y33.32679
G01 X-91.72909 Y33.38343
G01 X-91.74657 Y33.40769
G01 X-91.74720 Y33.41168
G01 X-91.75688 Y33.47287
G01 X-91.76567 Y33.58374
G01 X-91.76567 Y34.66088
G01 X-91.75985 Y34.75120
G01 X-91.75338 Y34.80136
G01 X-91.72506 Y34.93045
G01 X-91.66826 Y34.99778
G01 X-91.66526 Y35.00098
G01 X-91.62755 Y35.04391
G01 X-91.61411 Y35.06037
G01 X-91.49900 Y35.17665
G01 X-91.43115 Y35.23382
G01 X-91.43113 Y35.23382
G01 X-91.41424 Y35.23761
G01 X-91.35345 Y35.24467
G01 X-91.29872 Y35.24525
G01 X-91.21523 Y35.18379
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.29872 Y35.24528 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.29872 Y35.24528
G01 X-91.29872 Y35.24525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.49900 Y35.17665 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.49900 Y35.17665
G01 X-91.43113 Y35.23382
G01 X-91.43054 Y35.23433
G01 X-91.42574 Y35.24591
G01 X-91.38020 Y35.39600
G01 X-91.36372 Y35.47876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.36372 Y35.49047 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.36372 Y35.49047
G01 X-91.36374 Y35.64802
G01 X-91.36374 Y35.74058
G01 X-91.36372 Y35.79405
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.70476 Y37.49333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.70476 Y37.49333
G01 X-90.18879 Y36.97733
G01 X-90.14177 Y36.98195
G01 X-90.04571 Y36.98195
G01 X-89.88963 Y36.96659
G01 X-89.79542 Y36.94784
G01 X-89.64535 Y36.90232
G01 X-89.55661 Y36.86557
G01 X-89.41830 Y36.79163
G01 X-89.33842 Y36.73827
G01 X-89.21719 Y36.63877
G01 X-89.14927 Y36.57085
G01 X-89.04978 Y36.44962
G01 X-88.99641 Y36.36976
G01 X-88.92250 Y36.23143
G01 X-88.88574 Y36.14271
G01 X-88.84020 Y35.99262
G01 X-88.82374 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.82374 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.82374 Y35.47876
G01 X-88.80726 Y35.39600
G01 X-88.77700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.87045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.87045 Y35.29628
G01 X-88.84020 Y35.39600
G01 X-88.82374 Y35.47876
G01 X-88.82374 Y35.90977
G01 X-88.80726 Y35.99262
G01 X-88.76174 Y36.14271
G01 X-88.72499 Y36.23143
G01 X-88.65105 Y36.36976
G01 X-88.59768 Y36.44962
G01 X-88.49819 Y36.57085
G01 X-88.43027 Y36.63877
G01 X-88.30904 Y36.73827
G01 X-88.22918 Y36.79163
G01 X-88.22854 Y36.79199
G01 X-88.09087 Y36.86557
G01 X-88.00213 Y36.90232
G01 X-87.85204 Y36.94784
G01 X-87.83182 Y36.95185
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.13106 Y38.62698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.13106 Y38.62698
G01 X-85.41940 Y36.91528
G01 X-85.31204 Y36.94784
G01 X-85.21783 Y36.96659
G01 X-85.06177 Y36.98195
G01 X-84.96571 Y36.98195
G01 X-84.80963 Y36.96659
G01 X-84.71542 Y36.94784
G01 X-84.56535 Y36.90232
G01 X-84.47661 Y36.86557
G01 X-84.33830 Y36.79163
G01 X-84.25842 Y36.73827
G01 X-84.13719 Y36.63877
G01 X-84.06927 Y36.57085
G01 X-83.96978 Y36.44962
G01 X-83.91641 Y36.36976
G01 X-83.84250 Y36.23143
G01 X-83.80574 Y36.14271
G01 X-83.76020 Y35.99262
G01 X-83.74374 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.74374 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.74374 Y35.47876
G01 X-83.72726 Y35.39600
G01 X-83.69700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.79045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.79045 Y35.29628
G01 X-83.76020 Y35.39600
G01 X-83.74374 Y35.47876
G01 X-83.74374 Y35.90977
G01 X-83.72726 Y35.99262
G01 X-83.68174 Y36.14271
G01 X-83.64499 Y36.23143
G01 X-83.57105 Y36.36976
G01 X-83.51768 Y36.44962
G01 X-83.41819 Y36.57085
G01 X-83.35027 Y36.63877
G01 X-83.22904 Y36.73827
G01 X-83.14918 Y36.79163
G01 X-83.14854 Y36.79199
G01 X-83.01087 Y36.86557
G01 X-82.92213 Y36.90232
G01 X-82.77204 Y36.94784
G01 X-82.75182 Y36.95185
G01 X-82.67412 Y36.92841
G01 X-82.51077 Y36.86996
G01 X-82.43958 Y36.84058
G01 X-82.28901 Y36.76933
G01 X-82.23785 Y36.74202
G01 X-82.09919 Y36.65892
G01 X-82.06076 Y36.63329
G01 X-81.93343 Y36.53885
G01 X-81.90275 Y36.51368
G01 X-81.78642 Y36.40824
G01 X-81.75982 Y36.38165
G01 X-81.65439 Y36.26532
G01 X-81.62924 Y36.23466
G01 X-81.53478 Y36.10733
G01 X-81.50912 Y36.06887
G01 X-81.42599 Y35.93019
G01 X-81.39869 Y35.87898
G01 X-81.32746 Y35.72841
G01 X-81.29810 Y35.65732
G01 X-81.26749 Y35.57180
G01 X-81.11822 Y35.42252
G01 X-81.11540 Y35.41777
G01 X-81.03227 Y35.27909
G01 X-80.99142 Y35.21790
G01 X-80.89699 Y35.09057
G01 X-80.85515 Y35.03956
G01 X-80.74972 Y34.92321
G01 X-80.70483 Y34.87832
G01 X-80.58848 Y34.77289
G01 X-80.53747 Y34.73106
G01 X-80.50758 Y34.70888
G01 X-80.48042 Y34.68767
G01 X-80.42635 Y34.64330
G01 X-80.41271 Y34.63184
G01 X-80.36856 Y34.59382
G01 X-80.35335 Y34.58104
G01 X-80.31139 Y34.54658
G01 X-80.24210 Y34.48363
G01 X-80.24017 Y34.48173
G01 X-80.25139 Y34.42534
G01 X-80.25426 Y34.40825
G01 X-80.26399 Y34.35889
G01 X-80.27176 Y34.32455
G01 X-80.28436 Y34.25435
G01 X-80.28911 Y34.21851
G01 X-80.29305 Y34.18099
G01 X-80.29549 Y34.15001
G01 X-80.29767 Y34.09481
G01 X-80.29767 Y33.53715
G01 X-80.28888 Y33.42626
G01 X-80.28076 Y33.37482
G01 X-80.27537 Y33.36631
G01 X-80.25266 Y33.33002
G01 X-80.22223 Y33.28524
G01 X-80.20656 Y33.26395
G01 X-80.20329 Y33.25951
G01 X-80.19955 Y33.25435
G01 X-80.18469 Y33.22766
G01 X-80.15950 Y33.17998
G01 X-80.14080 Y33.14185
G01 X-80.13280 Y33.11648
G01 X-80.11756 Y33.06477
G01 X-80.10544 Y33.01770
G01 X-80.10326 Y32.99743
G01 X-80.09884 Y32.95031
G01 X-80.09851 Y32.94373
G01 X-80.09767 Y32.90932
G01 X-80.09767 Y31.65931
G01 X-80.09851 Y31.62492
G01 X-80.09884 Y31.61834
G01 X-80.10326 Y31.57122
G01 X-80.10544 Y31.55095
G01 X-80.11756 Y31.50388
G01 X-80.13280 Y31.45217
G01 X-80.14080 Y31.42682
G01 X-80.14901 Y31.40935
G01 X-80.15950 Y31.38867
G01 X-80.18469 Y31.34099
G01 X-80.19950 Y31.31440
G01 X-80.22305 Y31.28395
G01 X-80.25718 Y31.24224
G01 X-80.27969 Y31.21605
G01 X-80.30580 Y31.19360
G01 X-80.34753 Y31.15946
G01 X-80.37796 Y31.13591
G01 X-80.40473 Y31.12103
G01 X-80.45241 Y31.09583
G01 X-80.49041 Y31.07721
G01 X-80.51563 Y31.06926
G01 X-80.56016 Y31.05611
G01 X-80.56734 Y31.05400
G01 X-80.61451 Y31.04186
G01 X-80.63483 Y31.03965
G01 X-80.68192 Y31.03525
G01 X-80.68853 Y31.03492
G01 X-80.72294 Y31.03406
G01 X-80.91842 Y31.03406
G01 X-81.02947 Y31.02527
G01 X-81.09066 Y31.01557
G01 X-81.27293 Y30.96360
G01 X-81.29648 Y30.95390
G01 X-81.30242 Y30.93442
G01 X-81.31027 Y30.90726
G01 X-81.31802 Y30.87871
G01 X-81.32805 Y30.84458
G01 X-81.32970 Y30.83932
G01 X-81.36305 Y30.67099
G01 X-81.36549 Y30.64000
G01 X-81.36767 Y30.58481
G01 X-81.36767 Y29.58931
G01 X-81.36851 Y29.55492
G01 X-81.36884 Y29.54841
G01 X-81.37044 Y29.53137
G01 X-81.37326 Y29.50122
G01 X-81.37547 Y29.48093
G01 X-81.38759 Y29.43389
G01 X-81.40280 Y29.38217
G01 X-81.40666 Y29.36955
G01 X-81.42368 Y29.31555
G01 X-81.43831 Y29.26223
G01 X-81.43892 Y29.25967
G01 X-81.45617 Y29.19784
G01 X-81.45975 Y29.18674
G01 X-81.46452 Y29.17143
G01 X-81.36965 Y29.01893
G01 X-81.34268 Y28.98532
G01 X-81.29132 Y28.92799
G01 X-81.27166 Y28.90831
G01 X-81.18705 Y28.83615
G01 X-81.13694 Y28.79970
G01 X-81.11898 Y28.78707
G01 X-81.01479 Y28.77793
G01 X-80.99650 Y28.77765
G01 X-80.98093 Y28.77724
G01 X-80.95401 Y28.77628
G01 X-80.94568 Y28.77590
G01 X-80.88515 Y28.77290
G01 X-80.78962 Y28.76028
G01 X-80.72190 Y28.74788
G01 X-80.69759 Y28.74217
G01 X-80.57207 Y28.70160
G01 X-80.51741 Y28.68139
G01 X-80.50791 Y28.67638
G01 X-80.36978 Y28.60211
G01 X-80.34995 Y28.59101
G01 X-80.31273 Y28.56322
G01 X-80.20042 Y28.47344
G01 X-80.19092 Y28.46449
G01 X-80.14321 Y28.41476
G01 X-80.07225 Y28.33313
G01 X-80.04339 Y28.29381
G01 X-80.00547 Y28.23640
G01 X-79.96846 Y28.17397
G01 X-79.93161 Y28.09807
G01 X-79.92409 Y28.08210
G01 X-79.90278 Y28.03521
G01 X-79.87512 Y27.98068
G01 X-79.84449 Y27.92604
G01 X-79.82589 Y27.89462
G01 X-79.78144 Y27.82332
G01 X-79.69600 Y27.71011
G01 X-79.69597 Y27.71009
G01 X-79.69386 Y27.70727
G01 X-79.66704 Y27.69838
G01 X-79.60725 Y27.68532
G01 X-79.50540 Y27.67407
G01 X-79.40961 Y27.68362
G01 X-79.40344 Y27.68421
G01 X-79.30583 Y27.71535
G01 X-79.24979 Y27.73993
G01 X-79.17146 Y27.78324
G01 X-79.10230 Y27.84006
G01 X-79.04464 Y27.90854
G01 X-79.01832 Y27.94631
G01 X-78.96425 Y28.04740
G01 X-78.87949 Y28.26335
G01 X-78.78132 Y28.43335
G01 X-78.69592 Y28.54047
G01 X-78.69592 Y28.50221
G01 X-78.73989 Y28.44865
G01 X-78.79326 Y28.36876
G01 X-78.86719 Y28.23043
G01 X-78.90395 Y28.14171
G01 X-78.94947 Y27.99162
G01 X-78.96821 Y27.89741
G01 X-78.98358 Y27.74133
G01 X-78.98358 Y27.64529
G01 X-78.96821 Y27.48921
G01 X-78.94947 Y27.39503
G01 X-78.90395 Y27.24494
G01 X-78.86719 Y27.15619
G01 X-78.79326 Y27.01786
G01 X-78.77713 Y26.99378
G01 X-78.77713 Y26.89368
G01 X-78.85129 Y26.89368
G01 X-78.85015 Y26.99025
G01 X-78.86857 Y27.08670
G01 X-78.87342 Y27.10300
G01 X-78.88693 Y27.14227
G01 X-78.93654 Y27.26866
G01 X-78.97017 Y27.33783
G01 X-79.01418 Y27.40087
G01 X-79.05305 Y27.44814
G01 X-79.12602 Y27.52002
G01 X-79.21236 Y27.57519
G01 X-79.30827 Y27.61118
G01 X-79.36747 Y27.62657
G01 X-79.46874 Y27.64184
G01 X-79.57098 Y27.63574
G01 X-79.66971 Y27.60849
G01 X-79.69135 Y27.60001
G01 X-79.70593 Y27.57979
G01 X-79.71782 Y27.56406
G01 X-79.80252 Y27.43171
G01 X-79.83900 Y27.36229
G01 X-79.84349 Y27.35357
G01 X-79.86470 Y27.31192
G01 X-79.89841 Y27.23498
G01 X-79.90458 Y27.21832
G01 X-79.93158 Y27.15495
G01 X-79.96846 Y27.07903
G01 X-80.00545 Y27.01657
G01 X-80.04342 Y26.95911
G01 X-80.07225 Y26.91982
G01 X-80.14324 Y26.83821
G01 X-80.19092 Y26.78850
G01 X-80.20044 Y26.77951
G01 X-80.22927 Y26.75645
G01 X-80.33610 Y26.71822
G01 X-80.39597 Y26.70001
G01 X-80.55284 Y26.66071
G01 X-80.60224 Y26.65086
G01 X-80.75906 Y26.62759
G01 X-80.80252 Y26.62330
G01 X-80.95937 Y26.61560
G01 X-81.00090 Y26.61560
G01 X-81.15772 Y26.62330
G01 X-81.20118 Y26.62759
G01 X-81.35799 Y26.65086
G01 X-81.40745 Y26.66071
G01 X-81.56427 Y26.70001
G01 X-81.62409 Y26.71819
G01 X-81.78093 Y26.77430
G01 X-81.85657 Y26.80572
G01 X-82.01337 Y26.87989
G01 X-82.03912 Y26.89368
G01 X-82.07745 Y26.95104
G01 X-82.15139 Y27.08936
G01 X-82.18814 Y27.17811
G01 X-82.23366 Y27.32815
G01 X-82.25012 Y27.41093
G01 X-82.25012 Y27.72624
G01 X-82.29719 Y27.82571
G01 X-82.33841 Y27.90298
G01 X-82.42152 Y28.04166
G01 X-82.46244 Y28.10295
G01 X-82.55687 Y28.23028
G01 X-82.59868 Y28.28128
G01 X-82.70414 Y28.39762
G01 X-82.74417 Y28.43805
G01 X-82.74898 Y28.44250
G01 X-82.76726 Y28.46010
G01 X-82.81601 Y28.50884
G01 X-82.85875 Y28.55581
G01 X-82.85962 Y28.55919
G01 X-82.87679 Y28.62779
G01 X-82.88921 Y28.69000
G01 X-82.89937 Y28.75860
G01 X-82.90513 Y28.81705
G01 X-82.90851 Y28.88565
G01 X-82.90922 Y28.91430
G01 X-82.90922 Y29.15906
G01 X-82.91712 Y29.17575
G01 X-82.93932 Y29.22921
G01 X-82.95860 Y29.28311
G01 X-82.97257 Y29.32906
G01 X-82.98608 Y29.38298
G01 X-82.99431 Y29.42423
G01 X-83.00231 Y29.47816
G01 X-83.00612 Y29.51661
G01 X-83.00877 Y29.57054
G01 X-83.00922 Y29.58931
G01 X-83.00922 Y30.83932
G01 X-83.00877 Y30.85811
G01 X-83.00612 Y30.91204
G01 X-83.00231 Y30.95049
G01 X-82.99431 Y31.00442
G01 X-82.98608 Y31.04567
G01 X-82.97257 Y31.09959
G01 X-82.95898 Y31.14450
G01 X-82.95794 Y31.14508
G01 X-82.90983 Y31.17531
G01 X-82.87438 Y31.20066
G01 X-82.83254 Y31.23470
G01 X-82.80056 Y31.26426
G01 X-82.76127 Y31.30515
G01 X-82.72525 Y31.34719
G01 X-82.69574 Y31.38430
G01 X-82.68471 Y31.39919
G01 X-82.63150 Y31.46378
G01 X-82.58263 Y31.51768
G01 X-82.54291 Y31.55936
G01 X-82.49795 Y31.60432
G01 X-82.49795 Y33.18432
G01 X-82.50734 Y33.27990
G01 X-82.53523 Y33.37183
G01 X-82.58052 Y33.45653
G01 X-82.64146 Y33.53080
G01 X-82.69792 Y33.57713
G01 X-82.69792 Y34.03212
G01 X-82.67946 Y34.06713
G01 X-82.65215 Y34.15813
G01 X-82.64293 Y34.25272
G01 X-82.64293 Y34.31391
G01 X-82.65365 Y34.41579
G01 X-82.65403 Y34.41698
G01 X-82.65713 Y34.42001
G01 X-82.67625 Y34.43860
G01 X-82.75299 Y34.50342
G01 X-82.81057 Y34.54812
G01 X-82.86315 Y34.58556
G01 X-82.88702 Y34.60190
G01 X-82.94748 Y34.64162
G01 X-82.98103 Y34.66237
G01 X-82.99236 Y34.66895
G01 X-83.01235 Y34.68013
G01 X-83.05251 Y34.70172
G01 X-83.08408 Y34.71871
G01 X-83.10386 Y34.72976
G01 X-83.14107 Y34.75755
G01 X-83.25342 Y34.84736
G01 X-83.26289 Y34.85630
G01 X-83.31065 Y34.90604
G01 X-83.39345 Y35.00129
G01 X-83.41357 Y35.02445
G01 X-83.46190 Y35.07769
G01 X-83.47618 Y35.09491
G01 X-83.57498 Y35.19461
G01 X-83.64737 Y35.25630
G01 X-83.68453 Y35.28660
G01 X-83.69700 Y35.29633
G01 X-83.74521 Y35.29875
G01 X-83.79045 Y35.29628
G01 X-83.84110 Y35.25668
G01 X-83.91237 Y35.19450
G01 X-83.97889 Y35.12971
G01 X-84.02154 Y35.08315
G01 X-84.02649 Y35.07769
G01 X-84.07412 Y35.02465
G01 X-84.09726 Y34.99755
G01 X-84.17681 Y34.90604
G01 X-84.22454 Y34.85630
G01 X-84.23401 Y34.84736
G01 X-84.30899 Y34.78742
G01 X-84.34638 Y34.75755
G01 X-84.38354 Y34.72979
G01 X-84.40338 Y34.71871
G01 X-84.49769 Y34.66799
G01 X-84.54067 Y34.64289
G01 X-84.59388 Y34.60921
G01 X-84.60124 Y34.60464
G01 X-84.60795 Y34.60050
G01 X-84.63101 Y34.59732
G01 X-84.66175 Y34.59263
G01 X-84.71681 Y34.58201
G01 X-84.75550 Y34.57294
G01 X-84.82322 Y34.56057
G01 X-84.91874 Y34.54790
G01 X-84.97927 Y34.54492
G01 X-85.04818 Y34.54492
G01 X-85.10874 Y34.54790
G01 X-85.20422 Y34.56057
G01 X-85.27191 Y34.57294
G01 X-85.29626 Y34.57863
G01 X-85.40432 Y34.61356
G01 X-85.42184 Y34.61897
G01 X-85.48900 Y34.63875
G01 X-85.51257 Y34.64528
G01 X-85.57353 Y34.66108
G01 X-85.64668 Y34.67642
G01 X-85.73576 Y34.69090
G01 X-85.82911 Y34.70103
G01 X-85.83106 Y34.70126
G01 X-85.86012 Y34.72511
G01 X-85.87856 Y34.76410
G01 X-85.91100 Y34.84071
G01 X-85.91552 Y34.85280
G01 X-85.92715 Y34.88241
G01 X-85.95461 Y34.94866
G01 X-85.97952 Y35.00317
G01 X-85.98839 Y35.02077
G01 X-86.01181 Y35.07195
G01 X-86.01676 Y35.08386
G01 X-86.04816 Y35.15031
G01 X-86.08049 Y35.21081
G01 X-86.08143 Y35.21254
G01 X-86.11653 Y35.27782
G01 X-86.14859 Y35.33779
G01 X-86.16830 Y35.37256
G01 X-86.19540 Y35.41777
G01 X-86.19822 Y35.42252
G01 X-86.34749 Y35.57180
G01 X-86.37810 Y35.65732
G01 X-86.40746 Y35.72841
G01 X-86.47869 Y35.87898
G01 X-86.50599 Y35.93019
G01 X-86.58912 Y36.06887
G01 X-86.61478 Y36.10733
G01 X-86.70924 Y36.23466
G01 X-86.73439 Y36.26532
G01 X-86.83982 Y36.38165
G01 X-86.86642 Y36.40824
G01 X-86.98275 Y36.51368
G01 X-87.01343 Y36.53885
G01 X-87.14076 Y36.63329
G01 X-87.17919 Y36.65892
G01 X-87.31785 Y36.74202
G01 X-87.36901 Y36.76933
G01 X-87.51958 Y36.84058
G01 X-87.59077 Y36.86996
G01 X-87.75412 Y36.92841
G01 X-87.83182 Y36.95185
G01 X-88.37332 Y37.49333
G01 X-90.70476 Y37.49333
G01 X-91.33547 Y37.75457
G01 X-91.35747 Y37.76305
G01 X-91.42610 Y37.78762
G01 X-91.46336 Y37.79897
G01 X-91.53196 Y37.81614
G01 X-91.56410 Y37.82254
G01 X-91.63273 Y37.83273
G01 X-91.66194 Y37.83560
G01 X-91.73057 Y37.83897
G01 X-91.74474 Y37.83933
G01 X-92.16948 Y37.83933
G01 X-92.18363 Y37.83969
G01 X-92.25223 Y37.84306
G01 X-92.28144 Y37.84593
G01 X-92.35007 Y37.85612
G01 X-92.38220 Y37.86252
G01 X-92.45081 Y37.87969
G01 X-92.48807 Y37.89104
G01 X-92.55670 Y37.91561
G01 X-92.57870 Y37.92409
G01 X-93.20936 Y38.18530
G01 X-93.37354 Y38.18530
G01 X-94.76930 Y39.58111
G01 X-94.90234 Y39.64405
G01 X-94.97968 Y39.68530
G01 X-95.11834 Y39.76843
G01 X-95.17951 Y39.80925
G01 X-95.30689 Y39.90369
G01 X-95.35792 Y39.94557
G01 X-95.47425 Y40.05101
G01 X-95.51910 Y40.09587
G01 X-95.62457 Y40.21222
G01 X-95.66635 Y40.26318
G01 X-95.76081 Y40.39051
G01 X-95.80170 Y40.45180
G01 X-95.88484 Y40.59048
G01 X-95.92606 Y40.66775
G01 X-95.92622 Y40.66810
G01 X-96.01161 Y40.75350
G01 X-96.03793 Y40.82708
G01 X-96.06960 Y40.90374
G01 X-96.14082 Y41.05433
G01 X-96.17074 Y41.11039
G01 X-96.25385 Y41.24905
G01 X-96.28227 Y41.29162
G01 X-96.37671 Y41.41898
G01 X-96.40496 Y41.45339
G01 X-96.51039 Y41.56973
G01 X-96.54036 Y41.59970
G01 X-96.65669 Y41.70513
G01 X-96.69109 Y41.73335
G01 X-96.81844 Y41.82782
G01 X-96.86109 Y41.85629
G01 X-96.99977 Y41.93940
G01 X-97.05578 Y41.96927
G01 X-97.20632 Y42.04049
G01 X-97.28301 Y42.07216
G01 X-97.43713 Y42.12731
G01 X-101.61198 Y46.30213
G01 X-101.88262 Y46.95554
G01 X-101.89029 Y46.97541
G01 X-101.91485 Y47.04401
G01 X-101.92493 Y47.07721
G01 X-101.94210 Y47.14581
G01 X-101.94774 Y47.17406
G01 X-101.95793 Y47.24269
G01 X-101.96044 Y47.26811
G01 X-101.96382 Y47.33675
G01 X-101.96410 Y47.34901
G01 X-101.96410 Y57.10754
G01 X-101.96441 Y57.11981
G01 X-101.96778 Y57.18844
G01 X-101.97030 Y57.21389
G01 X-101.98048 Y57.28252
G01 X-101.98612 Y57.31077
G01 X-102.00329 Y57.37937
G01 X-102.01338 Y57.41257
G01 X-102.03794 Y57.48118
G01 X-102.04561 Y57.50104
G01 X-102.08998 Y57.60820
G01 X-102.08981 Y57.61168
G01 X-102.08211 Y57.76850
G01 X-102.08211 Y57.81613
G01 X-102.08981 Y57.97297
G01 X-102.09471 Y58.02258
G01 X-102.11797 Y58.17942
G01 X-102.12910 Y58.23520
G01 X-102.16839 Y58.39202
G01 X-102.18861 Y58.45849
G01 X-102.24472 Y58.61531
G01 X-102.27911 Y58.69814
G01 X-102.32910 Y58.80383
G01 X-102.32912 Y59.96466
G01 X-102.04561 Y60.64914
G01 X-102.03697 Y60.66862
G01 X-102.00581 Y60.73451
G01 X-101.98950 Y60.76509
G01 X-101.95315 Y60.82575
G01 X-101.93715 Y60.84972
G01 X-101.89583 Y60.90543
G01 X-101.87959 Y60.92524
G01 X-101.83344 Y60.97611
G01 X-101.82498 Y60.98500
G01 X-98.99476 Y63.81522
G01 X-98.98590 Y63.82368
G01 X-98.93500 Y63.86981
G01 X-98.91519 Y63.88606
G01 X-98.85948 Y63.92737
G01 X-98.84785 Y63.93554
G01 X-98.83388 Y63.93798
G01 X-98.76528 Y63.94814
G01 X-98.73982 Y63.95066
G01 X-98.67122 Y63.95404
G01 X-98.65893 Y63.95434
G01 X-91.30545 Y63.95434
G01 X-91.29315 Y63.95464
G01 X-91.22452 Y63.95802
G01 X-91.19905 Y63.96054
G01 X-91.13044 Y63.97070
G01 X-91.11645 Y63.97314
G01 X-91.10484 Y63.98131
G01 X-91.04914 Y64.02262
G01 X-91.02932 Y64.03887
G01 X-90.97842 Y64.08500
G01 X-90.96953 Y64.09346
G01 X-88.86103 Y66.20196
G01 X-88.55280 Y66.51022
G01 X-88.54391 Y66.51867
G01 X-88.49301 Y66.56480
G01 X-88.47320 Y66.58106
G01 X-88.41749 Y66.62236
G01 X-88.40589 Y66.63053
G01 X-88.39189 Y66.63297
G01 X-88.32328 Y66.64313
G01 X-88.29783 Y66.64565
G01 X-88.22923 Y66.64903
G01 X-88.21693 Y66.64933
G01 X-87.41394 Y66.64933
G01 X-87.40165 Y66.64964
G01 X-87.33301 Y66.65301
G01 X-87.30754 Y66.65553
G01 X-87.23893 Y66.66569
G01 X-87.21069 Y66.67133
G01 X-87.14208 Y66.68852
G01 X-87.10889 Y66.69861
G01 X-87.04028 Y66.72317
G01 X-87.02042 Y66.73084
G01 X-86.52110 Y66.93765
G01 X-86.17317 Y67.28558
G01 X-86.14521 Y67.31496
G01 X-86.09906 Y67.36586
G01 X-86.04633 Y67.43015
G01 X-86.00500 Y67.48585
G01 X-85.95567 Y67.55979
G01 X-85.91930 Y67.62045
G01 X-85.88793 Y67.67922
G01 X-85.27168 Y68.29553
G01 X-85.34419 Y68.43119
G01 X-85.38095 Y68.51991
G01 X-85.42647 Y68.67000
G01 X-85.44292 Y68.75273
G01 X-85.44292 Y69.18374
G01 X-85.42647 Y69.26662
G01 X-85.38887 Y69.39052
G01 X-85.36210 Y69.41097
G01 X-85.28555 Y69.47412
G01 X-85.22649 Y69.52743
G01 X-85.16916 Y69.58428
G01 X-85.16561 Y69.58781
G01 X-85.11425 Y69.63939
G01 X-85.09078 Y69.66411
G01 X-85.08252 Y69.67325
G01 X-85.07315 Y69.68379
G01 X-85.00985 Y69.75661
G01 X-84.96210 Y69.80635
G01 X-84.95263 Y69.81531
G01 X-84.84028 Y69.90510
G01 X-84.80310 Y69.93289
G01 X-84.78329 Y69.94394
G01 X-84.64519 Y70.01821
G01 X-84.63566 Y70.02324
G01 X-84.58098 Y70.04346
G01 X-84.45545 Y70.08402
G01 X-84.43112 Y70.08971
G01 X-84.36342 Y70.10208
G01 X-84.26795 Y70.11475
G01 X-84.20739 Y70.11773
G01 X-84.13848 Y70.11773
G01 X-84.07790 Y70.11475
G01 X-83.98242 Y70.10208
G01 X-83.91473 Y70.08971
G01 X-83.89040 Y70.08402
G01 X-83.76487 Y70.04346
G01 X-83.71021 Y70.02324
G01 X-83.70066 Y70.01821
G01 X-83.56256 Y69.94394
G01 X-83.54275 Y69.93286
G01 X-83.50556 Y69.90510
G01 X-83.39317 Y69.81526
G01 X-83.38451 Y69.80708
G01 X-83.38375 Y69.80635
G01 X-83.33328 Y69.75885
G01 X-83.31682 Y69.74381
G01 X-83.25832 Y69.69207
G01 X-83.21280 Y69.65484
G01 X-83.14740 Y69.60536
G01 X-83.07859 Y69.55796
G01 X-83.00508 Y69.51181
G01 X-83.00168 Y69.50543
G01 X-82.96493 Y69.41671
G01 X-82.94384 Y69.34717
G01 X-82.95022 Y69.27180
G01 X-82.95035 Y69.27041
G01 X-82.95149 Y69.25687
G01 X-82.96361 Y69.16627
G01 X-82.99063 Y69.01996
G01 X-82.99325 Y69.00576
G01 X-82.99741 Y68.98478
G01 X-83.00465 Y68.95400
G01 X-83.01014 Y68.93254
G01 X-83.02050 Y68.88593
G01 X-83.02744 Y68.84895
G01 X-83.03671 Y68.78242
G01 X-83.03704 Y68.77889
G01 X-83.03724 Y68.77762
G01 X-83.05243 Y68.71039
G01 X-83.08461 Y68.59469
G01 X-83.09739 Y68.56012
G01 X-83.12439 Y68.49680
G01 X-83.13523 Y68.47447
G01 X-83.15883 Y68.42583
G01 X-83.18913 Y68.35359
G01 X-83.20112 Y68.32007
G01 X-83.21512 Y68.28372
G01 X-83.22459 Y68.26091
G01 X-83.26820 Y68.12439
G01 X-83.28969 Y68.03279
G01 X-83.26376 Y67.97541
G01 X-83.23287 Y67.92261
G01 X-83.17222 Y67.84011
G01 X-83.09574 Y67.77201
G01 X-83.00679 Y67.72129
G01 X-82.95075 Y67.69670
G01 X-82.85312 Y67.66556
G01 X-82.82932 Y67.66320
G01 X-82.67138 Y67.76777
G01 X-82.61606 Y67.80125
G01 X-82.51547 Y67.85664
G01 X-82.51420 Y67.85735
G01 X-82.51136 Y67.85890
G01 X-82.50021 Y67.86490
G01 X-82.41410 Y67.89137
G01 X-82.39663 Y67.89340
G01 X-82.35594 Y67.89459
G01 X-80.65594 Y67.89459
G01 X-80.61522 Y67.89340
G01 X-80.59775 Y67.89137
G01 X-80.51164 Y67.86490
G01 X-80.43912 Y67.82106
G01 X-80.37921 Y67.76114
G01 X-80.33537 Y67.68860
G01 X-80.30890 Y67.60247
G01 X-80.30684 Y67.58499
G01 X-80.30567 Y67.54433
G01 X-80.30567 Y66.34382
G01 X-80.29688 Y66.23295
G01 X-80.28721 Y66.17176
G01 X-80.22797 Y65.97229
G01 X-80.17738 Y65.95413
G01 X-80.11619 Y65.93424
G01 X-79.94261 Y65.89919
G01 X-79.91164 Y65.89675
G01 X-79.85642 Y65.89457
G01 X-70.64308 Y65.89457
G01 X-70.53224 Y65.90336
G01 X-70.47102 Y65.91304
G01 X-70.46500 Y65.91403
G01 X-70.35609 Y65.99703
G01 X-70.34468 Y66.00760
G01 X-70.32540 Y66.02617
G01 X-67.67834 Y68.67318
G01 X-67.60603 Y68.75794
G01 X-67.56963 Y68.80808
G01 X-67.55444 Y68.82979
G01 X-67.54598 Y68.93350
G01 X-67.54586 Y68.94084
G01 X-67.54560 Y68.95349
G01 X-67.54286 Y69.00282
G01 X-67.52879 Y69.15786
G01 X-67.52861 Y69.15900
G01 X-67.51342 Y69.22626
G01 X-67.48121 Y69.34196
G01 X-67.46844 Y69.37653
G01 X-67.44146 Y69.43985
G01 X-67.40456 Y69.51580
G01 X-67.36762 Y69.57820
G01 X-67.32965 Y69.63563
G01 X-67.30082 Y69.67498
G01 X-67.22985 Y69.75661
G01 X-67.18210 Y69.80635
G01 X-67.17260 Y69.81529
G01 X-67.11012 Y69.86528
G01 X-67.06028 Y69.90510
G01 X-67.02310 Y69.93286
G01 X-67.00329 Y69.94394
G01 X-66.86516 Y70.01821
G01 X-66.85561 Y70.02324
G01 X-66.80098 Y70.04346
G01 X-66.67545 Y70.08402
G01 X-66.65112 Y70.08971
G01 X-66.58342 Y70.10208
G01 X-66.48795 Y70.11475
G01 X-66.42739 Y70.11773
G01 X-66.35848 Y70.11773
G01 X-66.29790 Y70.11475
G01 X-66.20242 Y70.10208
G01 X-66.13473 Y70.08971
G01 X-66.11040 Y70.08402
G01 X-65.98487 Y70.04346
G01 X-65.93021 Y70.02324
G01 X-65.92066 Y70.01821
G01 X-65.78256 Y69.94394
G01 X-65.76275 Y69.93286
G01 X-65.72557 Y69.90510
G01 X-65.61322 Y69.81529
G01 X-65.60375 Y69.80635
G01 X-65.55599 Y69.75661
G01 X-65.47319 Y69.66136
G01 X-65.45307 Y69.63820
G01 X-65.40486 Y69.58511
G01 X-65.39049 Y69.56774
G01 X-65.29168 Y69.46802
G01 X-65.21922 Y69.40630
G01 X-65.18190 Y69.37587
G01 X-65.16964 Y69.36629
G01 X-65.12122 Y69.36391
G01 X-65.07616 Y69.36639
G01 X-65.10647 Y69.26662
G01 X-65.12292 Y69.18374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.12292 Y68.75273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.12292 Y68.75273
G01 X-65.10647 Y68.67000
G01 X-65.06095 Y68.51991
G01 X-65.02419 Y68.43119
G01 X-64.95026 Y68.29286
G01 X-64.90100 Y68.21918
G01 X-65.81827 Y67.30193
G01 X-68.08586 Y65.03432
G01 X-69.13897 Y65.03435
G01 X-69.75268 Y64.78012
G01 X-69.77537 Y64.77138
G01 X-69.84400 Y64.74682
G01 X-69.88255 Y64.73509
G01 X-69.95116 Y64.71791
G01 X-69.98448 Y64.71126
G01 X-70.05314 Y64.70107
G01 X-70.08354 Y64.69808
G01 X-70.15215 Y64.69470
G01 X-70.16693 Y64.69434
G01 X-87.50993 Y64.69434
G01 X-87.52466 Y64.69399
G01 X-87.59326 Y64.69061
G01 X-87.62367 Y64.68761
G01 X-87.64236 Y64.68484
G01 X-87.68651 Y64.65838
G01 X-87.71048 Y64.64238
G01 X-87.76619 Y64.60107
G01 X-87.78600 Y64.58482
G01 X-87.83690 Y64.53869
G01 X-87.84579 Y64.53021
G01 X-90.18254 Y62.19348
G01 X-90.19140 Y62.18500
G01 X-90.24231 Y62.13887
G01 X-90.26212 Y62.12262
G01 X-90.31782 Y62.08132
G01 X-90.32945 Y62.07314
G01 X-90.34342 Y62.07070
G01 X-90.41203 Y62.06054
G01 X-90.43750 Y62.05803
G01 X-90.50614 Y62.05465
G01 X-90.51843 Y62.05434
G01 X-97.87193 Y62.05434
G01 X-97.88423 Y62.05404
G01 X-97.95283 Y62.05066
G01 X-97.97828 Y62.04815
G01 X-98.04689 Y62.03799
G01 X-98.06086 Y62.03555
G01 X-98.07249 Y62.02737
G01 X-98.12819 Y61.98607
G01 X-98.14800 Y61.96981
G01 X-98.19891 Y61.92369
G01 X-98.20780 Y61.91520
G01 X-99.92499 Y60.19798
G01 X-99.93347 Y60.18912
G01 X-99.97960 Y60.13822
G01 X-99.99585 Y60.11841
G01 X-100.03715 Y60.06270
G01 X-100.04531 Y60.05112
G01 X-100.04775 Y60.03710
G01 X-100.05793 Y59.96847
G01 X-100.06045 Y59.94302
G01 X-100.06382 Y59.87439
G01 X-100.06413 Y59.86212
G01 X-100.06413 Y48.30174
G01 X-100.06382 Y48.28947
G01 X-100.06045 Y48.22084
G01 X-100.05793 Y48.19542
G01 X-100.04775 Y48.12679
G01 X-100.04211 Y48.09854
G01 X-100.02494 Y48.02994
G01 X-100.01485 Y47.99674
G01 X-100.00330 Y47.96448
G01 X-99.97886 Y47.93751
G01 X-99.96644 Y47.92445
G01 X-98.75166 Y46.70967
G01 X-98.73861 Y46.69725
G01 X-98.68770 Y46.65112
G01 X-98.68214 Y46.64617
G01 X-98.65336 Y46.63774
G01 X-98.58476 Y46.62054
G01 X-98.55357 Y46.61434
G01 X-98.48496 Y46.60416
G01 X-98.45667 Y46.60136
G01 X-98.38806 Y46.59799
G01 X-98.37437 Y46.59766
G01 X-97.40447 Y46.59766
G01 X-97.39078 Y46.59733
G01 X-97.32215 Y46.59395
G01 X-97.29385 Y46.59115
G01 X-97.22525 Y46.58097
G01 X-97.19406 Y46.57477
G01 X-97.12545 Y46.55758
G01 X-97.08918 Y46.54655
G01 X-97.02057 Y46.52199
G01 X-96.99909 Y46.51371
G01 X-96.35517 Y46.24698
G01 X-92.25818 Y42.14996
G01 X-92.21116 Y42.15461
G01 X-92.11510 Y42.15461
G01 X-92.09684 Y42.15281
G01 X-91.96389 Y42.08992
G01 X-91.88663 Y42.04869
G01 X-91.74794 Y41.96559
G01 X-91.68665 Y41.92467
G01 X-91.55932 Y41.83023
G01 X-91.50834 Y41.78842
G01 X-91.39201 Y41.68296
G01 X-91.34713 Y41.63808
G01 X-91.24167 Y41.52175
G01 X-91.19983 Y41.47074
G01 X-91.10540 Y41.34341
G01 X-91.06455 Y41.28222
G01 X-90.98145 Y41.14357
G01 X-90.94017 Y41.06620
G01 X-90.89313 Y40.96673
G01 X-90.89313 Y40.82068
G01 X-90.89310 Y40.76726
G01 X-90.84606 Y40.66775
G01 X-90.80484 Y40.59051
G01 X-90.72171 Y40.45180
G01 X-90.68081 Y40.39051
G01 X-90.58635 Y40.26318
G01 X-90.54454 Y40.21222
G01 X-90.48269 Y40.14397
G01 X-90.41787 Y40.11332
G01 X-90.36212 Y40.09015
G01 X-90.20530 Y40.03404
G01 X-90.16395 Y40.02147
G01 X-90.00713 Y39.98218
G01 X-89.97540 Y39.97585
G01 X-89.81858 Y39.95258
G01 X-89.79224 Y39.94999
G01 X-89.63540 Y39.94227
G01 X-89.61084 Y39.94227
G01 X-89.45402 Y39.94999
G01 X-89.42768 Y39.95258
G01 X-89.27083 Y39.97585
G01 X-89.23911 Y39.98218
G01 X-89.08229 Y40.02147
G01 X-89.04099 Y40.03402
G01 X-88.88414 Y40.09013
G01 X-88.82836 Y40.11332
G01 X-88.71488 Y40.16699
G01 X-84.07905 Y40.16699
G01 X-84.04463 Y40.16615
G01 X-83.97600 Y40.16277
G01 X-83.90592 Y40.15584
G01 X-83.83731 Y40.14568
G01 X-83.76310 Y40.13087
G01 X-83.69449 Y40.11370
G01 X-83.61296 Y40.08891
G01 X-83.54433 Y40.06434
G01 X-83.49911 Y40.04689
G01 X-83.45106 Y40.02698
G01 X-80.33940 Y36.91528
G01 X-80.23204 Y36.94784
G01 X-80.13783 Y36.96659
G01 X-79.98177 Y36.98195
G01 X-79.88571 Y36.98195
G01 X-79.72963 Y36.96659
G01 X-79.63542 Y36.94784
G01 X-79.48535 Y36.90232
G01 X-79.39661 Y36.86557
G01 X-79.25830 Y36.79163
G01 X-79.17842 Y36.73827
G01 X-79.05719 Y36.63877
G01 X-78.98927 Y36.57085
G01 X-78.88978 Y36.44962
G01 X-78.83641 Y36.36976
G01 X-78.76250 Y36.23143
G01 X-78.72574 Y36.14271
G01 X-78.68020 Y35.99262
G01 X-78.66372 Y35.90977
G01 X-78.66372 Y35.47876
G01 X-78.64726 Y35.39600
G01 X-78.61700 Y35.29633
G01 X-78.60453 Y35.28660
G01 X-78.56737 Y35.25630
G01 X-78.49498 Y35.19461
G01 X-78.39618 Y35.09491
G01 X-78.38190 Y35.07769
G01 X-78.33357 Y35.02445
G01 X-78.31345 Y35.00129
G01 X-78.23065 Y34.90604
G01 X-78.18289 Y34.85630
G01 X-78.17342 Y34.84734
G01 X-78.12633 Y34.80969
G01 X-78.08355 Y34.77258
G01 X-78.06387 Y34.75412
G01 X-78.06047 Y34.75092
G01 X-78.04700 Y34.73845
G01 X-78.02971 Y34.71010
G01 X-78.02676 Y34.70522
G01 X-77.99440 Y34.65120
G01 X-77.95612 Y34.59392
G01 X-77.91518 Y34.53875
G01 X-77.91266 Y34.53535
G01 X-77.89415 Y34.51071
G01 X-77.88315 Y34.49567
G01 X-77.86720 Y34.47325
G01 X-77.77977 Y34.31394
G01 X-77.75442 Y34.25272
G01 X-77.73456 Y34.16403
G01 X-77.72544 Y34.12326
G01 X-77.74812 Y34.05343
G01 X-77.79933 Y33.96474
G01 X-77.83529 Y33.91523
G01 X-77.90387 Y33.83908
G01 X-77.98675 Y33.77886
G01 X-78.08038 Y33.73718
G01 X-78.13857 Y33.71828
G01 X-78.21330 Y33.70035
G01 X-78.28993 Y33.69433
G01 X-78.40918 Y33.69433
G01 X-78.46034 Y33.68978
G01 X-78.56308 Y33.66037
G01 X-78.65503 Y33.61236
G01 X-78.73539 Y33.54681
G01 X-78.80098 Y33.46639
G01 X-78.84898 Y33.37449
G01 X-78.87837 Y33.27175
G01 X-78.88292 Y33.22057
G01 X-78.88292 Y33.12433
G01 X-78.86293 Y33.12433
G01 X-78.86293 Y33.18432
G01 X-78.85353 Y33.27990
G01 X-78.82564 Y33.37183
G01 X-78.78035 Y33.45653
G01 X-78.71942 Y33.53080
G01 X-78.64517 Y33.59174
G01 X-78.56046 Y33.63700
G01 X-78.46854 Y33.66489
G01 X-78.37294 Y33.67431
G01 X-77.27294 Y33.67431
G01 X-77.25206 Y33.67226
G01 X-77.22508 Y33.65455
G01 X-76.97017 Y33.48709
G01 X-76.80271 Y33.23218
G01 X-76.33022 Y32.75963
G01 X-76.32293 Y32.75237
G01 X-76.32293 Y31.65931
G01 X-76.32057 Y31.61128
G01 X-76.31985 Y31.60432
G01 X-76.27794 Y31.56632
G01 X-76.27299 Y31.56182
G01 X-76.23710 Y31.52893
G01 X-76.19661 Y31.49377
G01 X-76.18716 Y31.48600
G01 X-76.14825 Y31.45209
G01 X-76.12626 Y31.43172
G01 X-76.09379 Y31.40340
G01 X-76.08158 Y31.39337
G01 X-76.04998 Y31.36568
G01 X-76.03482 Y31.35151
G01 X-76.00609 Y31.32636
G01 X-75.99291 Y31.31554
G01 X-75.96461 Y31.29070
G01 X-75.95204 Y31.27889
G01 X-75.92473 Y31.25491
G01 X-75.91112 Y31.24374
G01 X-75.88381 Y31.21976
G01 X-75.87124 Y31.20795
G01 X-75.84294 Y31.18311
G01 X-75.82976 Y31.17229
G01 X-75.80103 Y31.14714
G01 X-75.78587 Y31.13297
G01 X-75.75427 Y31.10528
G01 X-75.74205 Y31.09525
G01 X-75.70959 Y31.06693
G01 X-75.68760 Y31.04656
G01 X-75.64868 Y31.01265
G01 X-75.63924 Y31.00488
G01 X-75.59875 Y30.96972
G01 X-75.56286 Y30.93683
G01 X-75.55793 Y30.93233
G01 X-75.51597 Y30.89431
G01 X-75.00794 Y30.89431
G01 X-74.95991 Y30.89667
G01 X-74.90627 Y30.90196
G01 X-74.81206 Y30.92070
G01 X-74.76047 Y30.93635
G01 X-74.67172 Y30.97310
G01 X-74.62418 Y30.99853
G01 X-74.54429 Y31.05189
G01 X-74.50264 Y31.08608
G01 X-74.43472 Y31.15400
G01 X-74.40050 Y31.19568
G01 X-74.34714 Y31.27554
G01 X-74.32174 Y31.32309
G01 X-74.29372 Y31.39063
G01 X-74.28923 Y31.41318
G01 X-74.28125 Y31.46708
G01 X-74.27208 Y31.55976
G01 X-74.26944 Y31.61366
G01 X-74.26832 Y31.65931
G01 X-74.26832 Y32.90932
G01 X-74.26944 Y32.95499
G01 X-74.27208 Y33.00888
G01 X-74.28125 Y33.10157
G01 X-74.28923 Y33.15547
G01 X-74.29370 Y33.17787
G01 X-74.32174 Y33.24554
G01 X-74.34714 Y33.29309
G01 X-74.40050 Y33.37294
G01 X-74.43472 Y33.41462
G01 X-74.50264 Y33.48254
G01 X-74.54429 Y33.51673
G01 X-74.62418 Y33.57010
G01 X-74.67172 Y33.59552
G01 X-74.71285 Y33.61257
G01 X-74.76047 Y33.63228
G01 X-74.81206 Y33.64792
G01 X-74.85021 Y33.65552
G01 X-75.59893 Y34.40431
G01 X-75.65371 Y34.42702
G01 X-75.93578 Y34.61226
G01 X-76.12102 Y34.89430
G01 X-76.14371 Y34.94901
G01 X-76.26756 Y35.07289
G01 X-76.22250 Y35.15719
G01 X-76.18574 Y35.24591
G01 X-76.14373 Y35.38429
G01 X-76.14193 Y35.39659
G01 X-76.13799 Y35.42613
G01 X-76.15966 Y35.49400
G01 X-76.21810 Y35.65732
G01 X-76.24746 Y35.72841
G01 X-76.31869 Y35.87898
G01 X-76.34599 Y35.93019
G01 X-76.42912 Y36.06887
G01 X-76.45478 Y36.10733
G01 X-76.54924 Y36.23466
G01 X-76.57439 Y36.26532
G01 X-76.67982 Y36.38165
G01 X-76.70642 Y36.40824
G01 X-76.82275 Y36.51368
G01 X-76.85343 Y36.53885
G01 X-76.98076 Y36.63329
G01 X-77.01919 Y36.65892
G01 X-77.15785 Y36.74202
G01 X-77.20901 Y36.76933
G01 X-77.35958 Y36.84058
G01 X-77.43077 Y36.86996
G01 X-77.59412 Y36.92841
G01 X-77.67182 Y36.95185
G01 X-77.69204 Y36.94784
G01 X-77.84213 Y36.90232
G01 X-77.93087 Y36.86557
G01 X-78.06854 Y36.79199
G01 X-78.06918 Y36.79163
G01 X-78.14904 Y36.73827
G01 X-78.27027 Y36.63877
G01 X-78.33819 Y36.57085
G01 X-78.43768 Y36.44962
G01 X-78.49105 Y36.36976
G01 X-78.56499 Y36.23143
G01 X-78.60174 Y36.14271
G01 X-78.64726 Y35.99262
G01 X-78.66372 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.24017 Y34.48173 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.24017 Y34.48173
G01 X-80.21781 Y34.48757
G01 X-80.12924 Y34.50964
G01 X-80.02175 Y34.52892
G01 X-79.96920 Y34.53464
G01 X-79.95962 Y34.53573
G01 X-79.89910 Y34.54310
G01 X-79.84842 Y34.54741
G01 X-79.83872 Y34.54790
G01 X-79.74322 Y34.56057
G01 X-79.67550 Y34.57294
G01 X-79.65119 Y34.57863
G01 X-79.52566 Y34.61919
G01 X-79.47103 Y34.63941
G01 X-79.46148 Y34.64444
G01 X-79.42798 Y34.66245
G01 X-79.32338 Y34.71871
G01 X-79.30354 Y34.72979
G01 X-79.26638 Y34.75755
G01 X-79.22899 Y34.78742
G01 X-79.15401 Y34.84736
G01 X-79.14454 Y34.85630
G01 X-79.09681 Y34.90604
G01 X-79.01726 Y34.99755
G01 X-78.99412 Y35.02465
G01 X-78.94649 Y35.07769
G01 X-78.94154 Y35.08315
G01 X-78.89889 Y35.12971
G01 X-78.83237 Y35.19450
G01 X-78.76110 Y35.25668
G01 X-78.71045 Y35.29628
G01 X-78.66521 Y35.29875
G01 X-78.61700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.66372 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.66372 Y35.47876
G01 X-78.68020 Y35.39600
G01 X-78.71045 Y35.29628
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.73456 Y34.16403 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.73456 Y34.16403
G01 X-77.22508 Y33.65455
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.97017 Y33.48709 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.97017 Y33.48709
G01 X-76.78500 Y33.20518
G01 X-76.78295 Y33.18432
G01 X-76.78295 Y31.60432
G01 X-76.82790 Y31.55936
G01 X-76.86763 Y31.51768
G01 X-76.91650 Y31.46378
G01 X-76.96971 Y31.39919
G01 X-76.98074 Y31.38430
G01 X-77.01025 Y31.34719
G01 X-77.04627 Y31.30515
G01 X-77.08556 Y31.26426
G01 X-77.11754 Y31.23470
G01 X-77.15937 Y31.20066
G01 X-77.19483 Y31.17531
G01 X-77.24294 Y31.14508
G01 X-77.25795 Y31.13680
G01 X-77.26715 Y31.10470
G01 X-77.28066 Y31.05080
G01 X-77.28930 Y31.00744
G01 X-77.29730 Y30.95352
G01 X-77.30128 Y30.91303
G01 X-77.30393 Y30.85913
G01 X-77.30441 Y30.83932
G01 X-77.30441 Y29.58931
G01 X-77.30393 Y29.56952
G01 X-77.30128 Y29.51562
G01 X-77.29730 Y29.47514
G01 X-77.28930 Y29.42121
G01 X-77.28066 Y29.37785
G01 X-77.26715 Y29.32395
G01 X-77.25252 Y29.27582
G01 X-77.23321 Y29.22192
G01 X-77.21002 Y29.16609
G01 X-77.20443 Y29.15426
G01 X-77.20443 Y29.09030
G01 X-77.20370 Y29.06066
G01 X-77.20032 Y28.99205
G01 X-77.19435 Y28.93160
G01 X-77.18417 Y28.86300
G01 X-77.17136 Y28.79871
G01 X-77.15417 Y28.73010
G01 X-77.14848 Y28.70879
G01 X-77.11152 Y28.67623
G01 X-77.09077 Y28.65921
G01 X-77.05849 Y28.63102
G01 X-77.04111 Y28.61481
G01 X-77.03451 Y28.60874
G01 X-76.92481 Y28.50933
G01 X-76.87992 Y28.46447
G01 X-76.77449 Y28.34809
G01 X-76.73265 Y28.29708
G01 X-76.63822 Y28.16975
G01 X-76.59732 Y28.10851
G01 X-76.51421 Y27.96983
G01 X-76.47302 Y27.89264
G01 X-76.42592 Y27.79305
G01 X-76.42592 Y27.47773
G01 X-76.44241 Y27.39503
G01 X-76.48793 Y27.24494
G01 X-76.52468 Y27.15619
G01 X-76.59862 Y27.01786
G01 X-76.65198 Y26.93801
G01 X-76.73006 Y26.84291
G01 X-76.69859 Y26.84291
G01 X-76.68231 Y26.86330
G01 X-76.63187 Y26.91756
G01 X-76.60997 Y26.93780
G01 X-76.58348 Y26.95716
G01 X-76.51808 Y27.00481
G01 X-76.41322 Y27.04883
G01 X-76.35445 Y27.06579
G01 X-76.28833 Y27.07758
G01 X-76.28399 Y27.07537
G01 X-76.21305 Y27.03940
G01 X-76.13454 Y26.99165
G01 X-76.08638 Y26.96008
G01 X-76.03456 Y26.92345
G01 X-76.00103 Y26.89833
G01 X-75.94579 Y26.85447
G01 X-75.94398 Y26.85307
G01 X-75.82328 Y26.75655
G01 X-75.78610 Y26.72879
G01 X-75.76629 Y26.71771
G01 X-75.62819 Y26.64344
G01 X-75.61866 Y26.63841
G01 X-75.56398 Y26.61822
G01 X-75.42062 Y26.57192
G01 X-75.41470 Y26.57006
G01 X-75.39037 Y26.56257
G01 X-75.38877 Y26.56209
G01 X-75.34731 Y26.55076
G01 X-75.22064 Y26.50354
G01 X-75.19555 Y26.49170
G01 X-75.16131 Y26.47636
G01 X-75.11280 Y26.45589
G01 X-75.03149 Y26.41319
G01 X-74.95184 Y26.42104
G01 X-74.85763 Y26.43978
G01 X-74.77980 Y26.46341
G01 X-74.71305 Y26.50341
G01 X-74.63624 Y26.55467
G01 X-74.50888 Y26.64911
G01 X-74.44406 Y26.70232
G01 X-74.32771 Y26.80773
G01 X-74.27033 Y26.86511
G01 X-74.22113 Y26.91941
G01 X-74.19121 Y27.00305
G01 X-74.16878 Y27.07679
G01 X-74.12951 Y27.23364
G01 X-74.11701 Y27.29627
G01 X-74.09375 Y27.45309
G01 X-74.08821 Y27.50933
G01 X-74.08049 Y27.66617
G01 X-74.08049 Y27.72048
G01 X-74.08821 Y27.87732
G01 X-74.09375 Y27.93356
G01 X-74.11701 Y28.09040
G01 X-74.12951 Y28.15304
G01 X-74.16878 Y28.30986
G01 X-74.19121 Y28.38360
G01 X-74.24732 Y28.54047
G01 X-74.28493 Y28.63102
G01 X-74.29370 Y28.64951
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.29372 Y31.39063 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.29372 Y31.39063
G01 X-74.29370 Y28.64951
G01 X-74.40063 Y28.73727
G01 X-74.48049 Y28.79063
G01 X-74.61882 Y28.86457
G01 X-74.70754 Y28.90135
G01 X-74.85763 Y28.94687
G01 X-74.95184 Y28.96559
G01 X-75.10792 Y28.98095
G01 X-75.20396 Y28.98095
G01 X-75.25100 Y28.97633
G01 X-75.57299 Y29.29830
G01 X-75.55496 Y29.34184
G01 X-75.53931 Y29.39342
G01 X-75.52059 Y29.48763
G01 X-75.51531 Y29.54128
G01 X-75.51295 Y29.58931
G01 X-75.51295 Y30.83932
G01 X-75.51531 Y30.88735
G01 X-75.51597 Y30.89431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.31985 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.31985 Y31.60432
G01 X-76.78295 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.69592 Y30.98966 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.69592 Y30.98966
G01 X-78.73539 Y31.02184
G01 X-78.80098 Y31.10226
G01 X-78.84898 Y31.19416
G01 X-78.87837 Y31.29690
G01 X-78.88292 Y31.34808
G01 X-78.88292 Y31.44432
G01 X-78.86293 Y31.44432
G01 X-78.86293 Y31.38430
G01 X-78.85353 Y31.28872
G01 X-78.82564 Y31.19680
G01 X-78.78035 Y31.11209
G01 X-78.71942 Y31.03782
G01 X-78.69592 Y31.01857
G01 X-78.69592 Y30.98966
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.25012 Y27.67280 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.25012 Y27.67280
G01 X-82.25014 Y27.58022
G01 X-82.25012 Y27.42264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.25012 Y27.41093 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.25012 Y27.41093
G01 X-82.26660 Y27.32815
G01 X-82.31212 Y27.17811
G01 X-82.34890 Y27.08936
G01 X-82.42281 Y26.95104
G01 X-82.46112 Y26.89368
G01 X-82.03912 Y26.89368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-84.46850 Y23.80535 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-84.46850 Y23.80535
G01 X-88.36743 Y23.80535
G01 X-88.38643 Y23.81673
G01 X-88.47523 Y23.86433
G01 X-88.52425 Y23.88752
G01 X-88.60101 Y23.91942
G01 X-88.65003 Y23.93694
G01 X-88.71838 Y23.95775
G01 X-88.76738 Y23.97002
G01 X-88.82966 Y23.98244
G01 X-88.87868 Y23.98973
G01 X-88.93819 Y23.99559
G01 X-88.98722 Y23.99801
G01 X-89.01635 Y23.99872
G01 X-89.61635 Y23.99872
G01 X-89.64546 Y23.99801
G01 X-89.69448 Y23.99559
G01 X-89.75396 Y23.98973
G01 X-89.80299 Y23.98244
G01 X-89.86527 Y23.97002
G01 X-89.91426 Y23.95775
G01 X-89.98262 Y23.93694
G01 X-90.03164 Y23.91942
G01 X-90.10840 Y23.88752
G01 X-90.15742 Y23.86433
G01 X-90.24622 Y23.81673
G01 X-90.26522 Y23.80535
G01 X-94.22508 Y23.80535
G01 X-94.26739 Y23.82536
G01 X-94.35586 Y23.86212
G01 X-94.40486 Y23.87964
G01 X-94.48416 Y23.90377
G01 X-94.53315 Y23.91602
G01 X-94.60577 Y23.93052
G01 X-94.65477 Y23.93778
G01 X-94.72441 Y23.94467
G01 X-94.77344 Y23.94708
G01 X-94.80755 Y23.94792
G01 X-95.40752 Y23.94792
G01 X-95.44072 Y23.94713
G01 X-95.44161 Y23.94670
G01 X-95.48868 Y23.92445
G01 X-95.54679 Y23.89343
G01 X-95.59010 Y23.86745
G01 X-95.63864 Y23.83504
G01 X-95.67844 Y23.80553
G01 X-95.72081 Y23.77078
G01 X-95.75715 Y23.73783
G01 X-95.79492 Y23.70006
G01 X-95.82789 Y23.66369
G01 X-95.86246 Y23.62155
G01 X-95.89198 Y23.58175
G01 X-95.92459 Y23.53291
G01 X-95.95057 Y23.48955
G01 X-95.95535 Y23.48147
G01 X-95.96007 Y23.42950
G01 X-95.96249 Y23.38048
G01 X-95.96322 Y23.35046
G01 X-95.96322 Y22.75046
G01 X-95.96249 Y22.72046
G01 X-95.96007 Y22.67144
G01 X-95.95405 Y22.61030
G01 X-95.94676 Y22.56131
G01 X-95.93391 Y22.49687
G01 X-95.92164 Y22.44784
G01 X-95.90033 Y22.37782
G01 X-95.88281 Y22.32879
G01 X-95.85007 Y22.24995
G01 X-95.84803 Y22.24564
G01 X-95.84803 Y21.87670
G01 X-95.84905 Y21.83532
G01 X-95.85240 Y21.76672
G01 X-95.86071 Y21.68259
G01 X-95.87089 Y21.61399
G01 X-95.88857 Y21.52527
G01 X-95.90577 Y21.45666
G01 X-95.91712 Y21.41930
G01 X-95.94915 Y21.37142
G01 X-95.99266 Y21.31838
G01 X-96.02497 Y21.28275
G01 X-97.32037 Y19.98735
G01 X-97.35601 Y19.95504
G01 X-97.40904 Y19.91153
G01 X-97.41852 Y19.90518
G01 X-97.48890 Y19.85816
G01 X-97.54940 Y19.82580
G01 X-97.63815 Y19.78905
G01 X-97.70381 Y19.76914
G01 X-97.79802 Y19.75039
G01 X-97.86632 Y19.74368
G01 X-97.91435 Y19.74132
G01 X-100.17589 Y19.74132
G01 X-100.37556 Y19.83543
G01 X-100.43677 Y19.85247
G01 X-100.59240 Y19.87863
G01 X-100.60672 Y19.87945
G01 X-100.61508 Y19.87998
G01 X-100.64119 Y19.88178
G01 X-100.65524 Y19.88262
G01 X-100.67546 Y19.88361
G01 X-100.70947 Y19.88864
G01 X-100.75029 Y19.89596
G01 X-100.77706 Y19.90155
G01 X-100.84546 Y19.91244
G01 X-100.86144 Y19.91422
G01 X-100.91973 Y19.92293
G01 X-100.92417 Y19.92380
G01 X-100.99179 Y19.93365
G01 X-101.08584 Y19.94353
G01 X-101.15686 Y19.94831
G01 X-101.16507 Y19.95504
G01 X-101.20070 Y19.98735
G01 X-102.69930 Y21.48595
G01 X-102.73161 Y21.52158
G01 X-102.77512 Y21.57462
G01 X-102.82849 Y21.65448
G01 X-102.86085 Y21.71498
G01 X-102.89760 Y21.80373
G01 X-102.91751 Y21.86938
G01 X-102.93626 Y21.96359
G01 X-102.94297 Y22.03189
G01 X-102.94533 Y22.07990
G01 X-102.94533 Y24.42000
G01 X-102.92280 Y24.48299
G01 X-102.89575 Y24.57192
G01 X-102.87121 Y24.66994
G01 X-102.85526 Y24.74992
G01 X-102.84073 Y24.84794
G01 X-102.83334 Y24.92267
G01 X-102.82851 Y25.02066
G01 X-102.82762 Y25.05731
G01 X-102.82762 Y26.98266
G01 X-102.67761 Y27.34781
G01 X-102.67761 Y28.02355
G01 X-102.67708 Y28.04539
G01 X-102.67373 Y28.11405
G01 X-102.66931 Y28.15878
G01 X-102.65912 Y28.22739
G01 X-102.64952 Y28.27552
G01 X-102.63235 Y28.34412
G01 X-102.61589 Y28.39823
G01 X-102.59133 Y28.46686
G01 X-102.57944 Y28.49764
G01 X-102.40992 Y28.90689
G01 X-102.27253 Y29.04430
G01 X-102.91165 Y29.68344
G01 X-102.99976 Y29.90056
G01 X-103.03969 Y29.96970
G01 X-103.12379 Y30.08748
G01 X-103.14949 Y30.11679
G01 X-103.18094 Y30.15034
G01 X-103.99587 Y30.96530
G01 X-107.86894 Y34.83837
G01 X-107.91596 Y34.89026
G01 X-107.96399 Y34.93829
G01 X-108.01588 Y34.98531
G01 X-111.24440 Y38.21380
G01 X-111.31384 Y38.27469
G01 X-111.37556 Y38.32206
G01 X-111.55885 Y38.42676
G01 X-111.63596 Y38.45871
G01 X-111.70457 Y38.47634
G01 X-111.73380 Y38.48385
G01 X-111.80360 Y38.46516
G01 X-111.88105 Y38.42904
G01 X-111.94785 Y38.39046
G01 X-112.01778 Y38.34146
G01 X-112.04440 Y38.31484
G01 X-112.04772 Y38.30110
G01 X-112.06987 Y38.17812
G01 X-112.07556 Y38.12876
G01 X-112.08011 Y38.09498
G01 X-112.08737 Y38.04832
G01 X-112.09621 Y37.94609
G01 X-112.09685 Y37.90692
G01 X-112.09692 Y37.88977
G01 X-112.09669 Y37.86077
G01 X-112.09667 Y37.85533
G01 X-112.09667 Y37.05531
G01 X-112.09751 Y37.02092
G01 X-112.10025 Y36.96509
G01 X-112.11313 Y36.86488
G01 X-112.12524 Y36.79699
G01 X-112.12763 Y36.78660
G01 X-112.17145 Y36.64710
G01 X-112.18260 Y36.61447
G01 X-112.19781 Y36.58348
G01 X-112.26545 Y36.45389
G01 X-112.27112 Y36.44484
G01 X-112.31051 Y36.38828
G01 X-112.37228 Y36.30835
G01 X-112.40983 Y36.26692
G01 X-112.45852 Y36.21823
G01 X-112.49994 Y36.18068
G01 X-112.57988 Y36.11891
G01 X-112.63644 Y36.07952
G01 X-112.64549 Y36.07385
G01 X-112.77508 Y36.00621
G01 X-112.80607 Y35.99100
G01 X-112.83870 Y35.97985
G01 X-112.97820 Y35.93603
G01 X-112.98859 Y35.93364
G01 X-113.05648 Y35.92153
G01 X-113.15669 Y35.90865
G01 X-113.21252 Y35.90591
G01 X-113.28132 Y35.90591
G01 X-113.33715 Y35.90865
G01 X-113.43738 Y35.92153
G01 X-113.50530 Y35.93364
G01 X-113.51566 Y35.93603
G01 X-113.65516 Y35.97985
G01 X-113.68778 Y35.99100
G01 X-113.71876 Y36.00621
G01 X-113.84838 Y36.07385
G01 X-113.85740 Y36.07952
G01 X-113.91396 Y36.11891
G01 X-113.99392 Y36.18068
G01 X-114.03532 Y36.21823
G01 X-114.08402 Y36.26692
G01 X-114.12537 Y36.31254
G01 X-114.17121 Y36.36265
G01 X-114.19082 Y36.38213
G01 X-114.22514 Y36.41863
G01 X-114.24000 Y36.43557
G01 X-114.36161 Y36.54837
G01 X-114.38742 Y36.56809
G01 X-114.44043 Y36.61137
G01 X-114.45646 Y36.62534
G01 X-114.46166 Y36.62958
G01 X-114.46187 Y36.62976
G01 X-114.50047 Y36.75701
G01 X-114.51691 Y36.83971
G01 X-114.51691 Y38.07072
G01 X-114.50047 Y38.15363
G01 X-114.45493 Y38.30369
G01 X-114.41818 Y38.39244
G01 X-114.34426 Y38.53074
G01 X-114.29090 Y38.61063
G01 X-114.23692 Y38.67639
G01 X-114.23692 Y40.90826
G01 X-114.51193 Y41.18327
G01 X-114.71490 Y41.67333
G01 X-115.00195 Y41.96035
G01 X-115.49194 Y42.16332
G01 X-115.73758 Y42.40892
G01 X-115.82569 Y42.62606
G01 X-115.86562 Y42.69520
G01 X-115.94985 Y42.81311
G01 X-115.97558 Y42.84242
G01 X-116.00690 Y42.87585
G01 X-118.94314 Y45.81211
G01 X-118.96689 Y45.83705
G01 X-118.98860 Y45.86101
G01 X-119.02879 Y45.91302
G01 X-119.06760 Y45.96863
G01 X-119.06810 Y45.96959
G01 X-119.11347 Y46.05648
G01 X-119.12866 Y46.08745
G01 X-119.13981 Y46.12009
G01 X-119.16917 Y46.21361
G01 X-119.16950 Y46.21465
G01 X-119.18136 Y46.28132
G01 X-119.18975 Y46.34660
G01 X-119.19135 Y46.37884
G01 X-119.19218 Y46.41330
G01 X-119.19218 Y46.55107
G01 X-119.19823 Y46.64320
G01 X-119.20839 Y46.72034
G01 X-119.25441 Y46.90002
G01 X-119.27019 Y46.91792
G01 X-119.32205 Y46.97513
G01 X-119.33006 Y46.98384
G01 X-119.38759 Y47.04553
G01 X-119.49302 Y47.14249
G01 X-119.51146 Y47.15714
G01 X-119.51471 Y47.15986
G01 X-119.51497 Y47.16009
G01 X-119.56460 Y47.17337
G01 X-119.64872 Y47.18821
G01 X-119.69703 Y47.18821
G01 X-119.73008 Y47.16651
G01 X-119.80244 Y47.11429
G01 X-119.86787 Y47.06235
G01 X-119.86828 Y47.06204
G01 X-119.92975 Y47.01333
G01 X-119.98474 Y46.96514
G01 X-120.01286 Y46.93794
G01 X-120.04484 Y46.90489
G01 X-120.04501 Y46.90469
G01 X-120.09348 Y46.85625
G01 X-120.13490 Y46.81871
G01 X-120.21484 Y46.75694
G01 X-120.27146 Y46.71749
G01 X-120.28047 Y46.71185
G01 X-120.41011 Y46.64419
G01 X-120.44108 Y46.62900
G01 X-120.47369 Y46.61785
G01 X-120.61321 Y46.57403
G01 X-120.62355 Y46.57165
G01 X-120.69147 Y46.55953
G01 X-120.79167 Y46.54665
G01 X-120.84753 Y46.54391
G01 X-120.91634 Y46.54391
G01 X-120.97217 Y46.54665
G01 X-121.07237 Y46.55953
G01 X-121.14026 Y46.57165
G01 X-121.15065 Y46.57403
G01 X-121.29015 Y46.61785
G01 X-121.32279 Y46.62900
G01 X-121.35377 Y46.64421
G01 X-121.48337 Y46.71185
G01 X-121.49241 Y46.71752
G01 X-121.54897 Y46.75691
G01 X-121.64405 Y46.83040
G01 X-121.67374 Y46.85211
G01 X-121.72129 Y46.88508
G01 X-121.73305 Y46.89339
G01 X-121.78603 Y46.93162
G01 X-121.86929 Y46.98445
G01 X-121.95382 Y47.03151
G01 X-121.99921 Y47.05539
G01 X-122.00099 Y47.05526
G01 X-122.07717 Y47.04320
G01 X-122.15804 Y47.02323
G01 X-122.23434 Y46.98986
G01 X-122.30389 Y46.94404
G01 X-122.30721 Y46.94142
G01 X-122.36149 Y46.89862
G01 X-122.41064 Y46.84886
G01 X-122.41222 Y46.85044
G01 X-122.55631 Y46.70632
G01 X-122.58138 Y46.68706
G01 X-122.58146 Y46.71927
G01 X-122.54539 Y46.74886
G01 X-122.47747 Y46.81678
G01 X-122.37798 Y46.93802
G01 X-122.32461 Y47.01787
G01 X-122.25070 Y47.15618
G01 X-122.21392 Y47.24492
G01 X-122.16840 Y47.39501
G01 X-122.15192 Y47.47777
G01 X-122.15192 Y48.70880
G01 X-122.13546 Y48.79163
G01 X-122.08994 Y48.94170
G01 X-122.05319 Y49.03044
G01 X-121.97925 Y49.16875
G01 X-121.92588 Y49.24863
G01 X-121.82639 Y49.36986
G01 X-121.75847 Y49.43778
G01 X-121.72192 Y49.46775
G01 X-121.72192 Y49.78531
G01 X-121.71956 Y49.83334
G01 X-121.71285 Y49.90164
G01 X-121.69411 Y49.99585
G01 X-121.67420 Y50.06151
G01 X-121.63744 Y50.15025
G01 X-121.60508 Y50.21076
G01 X-121.57112 Y50.26161
G01 X-121.55172 Y50.29061
G01 X-121.50821 Y50.34365
G01 X-121.47590 Y50.37928
G01 X-121.15385 Y50.70133
G01 X-120.46940 Y50.98485
G01 X-120.44953 Y50.99252
G01 X-120.38093 Y51.01708
G01 X-120.34773 Y51.02716
G01 X-120.27913 Y51.04433
G01 X-120.25088 Y51.04997
G01 X-120.18225 Y51.06016
G01 X-120.15683 Y51.06267
G01 X-120.08819 Y51.06605
G01 X-120.07590 Y51.06633
G01 X-113.28394 Y51.06633
G01 X-113.27165 Y51.06663
G01 X-113.20302 Y51.07001
G01 X-113.17757 Y51.07253
G01 X-113.10893 Y51.08271
G01 X-113.09494 Y51.08513
G01 X-113.08333 Y51.09330
G01 X-113.02763 Y51.13463
G01 X-113.00784 Y51.15086
G01 X-112.95694 Y51.19701
G01 X-112.94805 Y51.20547
G01 X-99.38826 Y64.76523
G01 X-99.37940 Y64.77369
G01 X-99.32850 Y64.81982
G01 X-99.30868 Y64.83608
G01 X-99.25298 Y64.87738
G01 X-99.24140 Y64.88553
G01 X-99.22738 Y64.88797
G01 X-99.15875 Y64.89815
G01 X-99.13332 Y64.90067
G01 X-99.06469 Y64.90405
G01 X-99.05242 Y64.90433
G01 X-91.69892 Y64.90433
G01 X-91.68665 Y64.90463
G01 X-91.61802 Y64.90801
G01 X-91.59257 Y64.91052
G01 X-91.52394 Y64.92071
G01 X-91.50994 Y64.92312
G01 X-91.49834 Y64.93130
G01 X-91.44263 Y64.97263
G01 X-91.42285 Y64.98886
G01 X-91.37194 Y65.03501
G01 X-91.36305 Y65.04347
G01 X-88.94630 Y67.46023
G01 X-88.93741 Y67.46868
G01 X-88.91582 Y67.48824
G01 X-88.90677 Y67.49688
G01 X-88.88755 Y67.51608
G01 X-88.86809 Y67.53371
G01 X-88.85580 Y67.54379
G01 X-88.83471 Y67.56292
G01 X-88.81597 Y67.58169
G01 X-88.79166 Y67.60366
G01 X-88.78130 Y67.61217
G01 X-88.75303 Y67.63785
G01 X-88.73560 Y67.65527
G01 X-88.70035 Y67.68715
G01 X-88.69461 Y67.69185
G01 X-88.65094 Y67.73155
G01 X-88.63713 Y67.74537
G01 X-88.61043 Y67.77079
G01 X-88.58483 Y67.79398
G01 X-88.55191 Y67.82533
G01 X-88.41295 Y67.96431
G01 X-88.41295 Y67.99385
G01 X-88.37640 Y68.02385
G01 X-88.30848 Y68.09177
G01 X-88.20898 Y68.21301
G01 X-88.15562 Y68.29286
G01 X-88.08168 Y68.43119
G01 X-88.04493 Y68.51991
G01 X-87.99941 Y68.67000
G01 X-87.98292 Y68.75273
G01 X-87.98292 Y69.18374
G01 X-87.96647 Y69.26662
G01 X-87.92887 Y69.39052
G01 X-87.90210 Y69.41097
G01 X-87.82555 Y69.47412
G01 X-87.76649 Y69.52743
G01 X-87.70916 Y69.58428
G01 X-87.70561 Y69.58781
G01 X-87.65425 Y69.63939
G01 X-87.63078 Y69.66411
G01 X-87.62252 Y69.67325
G01 X-87.61315 Y69.68379
G01 X-87.54985 Y69.75661
G01 X-87.50210 Y69.80635
G01 X-87.49263 Y69.81531
G01 X-87.38028 Y69.90510
G01 X-87.34310 Y69.93289
G01 X-87.32329 Y69.94394
G01 X-87.18519 Y70.01821
G01 X-87.17566 Y70.02324
G01 X-87.12098 Y70.04346
G01 X-86.99545 Y70.08402
G01 X-86.97112 Y70.08971
G01 X-86.90342 Y70.10208
G01 X-86.80795 Y70.11475
G01 X-86.74739 Y70.11773
G01 X-86.67848 Y70.11773
G01 X-86.61790 Y70.11475
G01 X-86.52242 Y70.10208
G01 X-86.45473 Y70.08971
G01 X-86.43040 Y70.08402
G01 X-86.30487 Y70.04346
G01 X-86.25021 Y70.02324
G01 X-86.24066 Y70.01821
G01 X-86.10256 Y69.94394
G01 X-86.08275 Y69.93286
G01 X-86.04556 Y69.90510
G01 X-85.93320 Y69.81529
G01 X-85.92375 Y69.80635
G01 X-85.87599 Y69.75661
G01 X-85.81270 Y69.68379
G01 X-85.77107 Y69.63985
G01 X-85.74706 Y69.61656
G01 X-85.71938 Y69.58826
G01 X-85.69225 Y69.55903
G01 X-85.60046 Y69.47401
G01 X-85.52227 Y69.41143
G01 X-85.50729 Y69.39964
G01 X-85.49743 Y69.39200
G01 X-85.45941 Y69.26662
G01 X-85.44292 Y69.18374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.36210 Y69.41097 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.36210 Y69.41097
G01 X-85.38798 Y69.39121
G01 X-85.43053 Y69.38925
G01 X-85.49743 Y69.39200
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.44292 Y68.75273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.44292 Y68.75273
G01 X-85.45941 Y68.67000
G01 X-85.50493 Y68.51991
G01 X-85.54168 Y68.43119
G01 X-85.61562 Y68.29286
G01 X-85.66898 Y68.21301
G01 X-85.76848 Y68.09177
G01 X-85.83640 Y68.02385
G01 X-85.87295 Y67.99385
G01 X-85.87295 Y67.82530
G01 X-85.87531 Y67.77729
G01 X-85.88201 Y67.70899
G01 X-85.88793 Y67.67922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.41295 Y67.96431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.41295 Y67.96431
G01 X-87.76187 Y67.96431
G01 X-87.64592 Y68.08029
G01 X-87.65740 Y68.09177
G01 X-87.73792 Y68.18989
G01 X-87.75689 Y68.21301
G01 X-87.81026 Y68.29286
G01 X-87.88419 Y68.43119
G01 X-87.92095 Y68.51991
G01 X-87.96647 Y68.67000
G01 X-87.98292 Y68.75273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.98292 Y69.18374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.98292 Y69.18374
G01 X-87.99941 Y69.26662
G01 X-88.03743 Y69.39200
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.90210 Y69.41097 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.90210 Y69.41097
G01 X-87.92798 Y69.39121
G01 X-87.97053 Y69.38925
G01 X-88.03743 Y69.39200
G01 X-88.04729 Y69.39964
G01 X-88.06227 Y69.41143
G01 X-88.14046 Y69.47401
G01 X-88.23225 Y69.55903
G01 X-88.25938 Y69.58826
G01 X-88.28706 Y69.61656
G01 X-88.31107 Y69.63985
G01 X-88.35270 Y69.68379
G01 X-88.41599 Y69.75661
G01 X-88.46375 Y69.80635
G01 X-88.47320 Y69.81529
G01 X-88.58556 Y69.90510
G01 X-88.62275 Y69.93286
G01 X-88.64256 Y69.94394
G01 X-88.78066 Y70.01821
G01 X-88.79021 Y70.02324
G01 X-88.84487 Y70.04346
G01 X-88.97040 Y70.08402
G01 X-88.99473 Y70.08971
G01 X-89.06242 Y70.10208
G01 X-89.15790 Y70.11475
G01 X-89.21848 Y70.11773
G01 X-89.28739 Y70.11773
G01 X-89.34795 Y70.11475
G01 X-89.44342 Y70.10208
G01 X-89.51112 Y70.08971
G01 X-89.53545 Y70.08402
G01 X-89.66098 Y70.04346
G01 X-89.71566 Y70.02324
G01 X-89.72519 Y70.01821
G01 X-89.86329 Y69.94394
G01 X-89.88310 Y69.93289
G01 X-89.92028 Y69.90510
G01 X-90.03263 Y69.81531
G01 X-90.04210 Y69.80635
G01 X-90.08985 Y69.75661
G01 X-90.16082 Y69.67498
G01 X-90.18968 Y69.63563
G01 X-90.22762 Y69.57820
G01 X-90.26458 Y69.51580
G01 X-90.30146 Y69.43985
G01 X-90.32846 Y69.37653
G01 X-90.34124 Y69.34196
G01 X-90.37342 Y69.22626
G01 X-90.38861 Y69.15900
G01 X-90.38881 Y69.15786
G01 X-90.40288 Y69.00282
G01 X-90.40514 Y68.96833
G01 X-90.40286 Y68.93381
G01 X-90.38881 Y68.77879
G01 X-90.38861 Y68.77762
G01 X-90.37342 Y68.71039
G01 X-90.34124 Y68.59469
G01 X-90.32846 Y68.56012
G01 X-90.30146 Y68.49680
G01 X-90.26458 Y68.42083
G01 X-90.24360 Y68.38545
G01 X-90.22823 Y68.35812
G01 X-90.21673 Y68.33655
G01 X-90.19417 Y68.29731
G01 X-90.19311 Y68.29561
G01 X-90.12417 Y68.15189
G01 X-90.12343 Y68.14984
G01 X-90.09455 Y68.07955
G01 X-90.09737 Y68.07270
G01 X-90.20200 Y67.88951
G01 X-90.24937 Y67.82779
G01 X-90.31030 Y67.75824
G01 X-91.84276 Y66.22581
G01 X-91.87619 Y66.19449
G01 X-91.90550 Y66.16876
G01 X-91.99750 Y66.10018
G01 X-92.02653 Y66.09579
G01 X-92.10367 Y66.08563
G01 X-92.19579 Y66.07958
G01 X-93.88309 Y66.07958
G01 X-93.92881 Y66.08108
G01 X-93.96770 Y66.08362
G01 X-94.11075 Y66.10745
G01 X-94.18789 Y66.12812
G01 X-94.40755 Y66.22096
G01 X-94.41278 Y66.22845
G01 X-94.45134 Y66.29523
G01 X-94.48743 Y66.37265
G01 X-94.50758 Y66.44776
G01 X-94.48098 Y66.54024
G01 X-94.44903 Y66.61738
G01 X-94.34441 Y66.80059
G01 X-94.29703 Y66.86231
G01 X-94.23610 Y66.93185
G01 X-93.91093 Y67.25700
G01 X-93.83778 Y67.33018
G01 X-93.81405 Y67.35507
G01 X-93.79096 Y67.38055
G01 X-93.77052 Y67.40811
G01 X-93.73224 Y67.46538
G01 X-93.71461 Y67.49482
G01 X-93.69993 Y67.52588
G01 X-93.67359 Y67.58949
G01 X-93.66203 Y67.62180
G01 X-93.65368 Y67.65515
G01 X-93.65073 Y67.66741
G01 X-93.64027 Y67.72258
G01 X-93.63521 Y67.75662
G01 X-93.63351 Y67.79086
G01 X-93.63267 Y67.82530
G01 X-93.63267 Y67.83584
G01 X-93.63161 Y67.87450
G01 X-93.62980 Y67.90729
G01 X-93.60958 Y68.04158
G01 X-93.60793 Y68.04826
G01 X-93.56259 Y68.10401
G01 X-93.54202 Y68.12819
G01 X-93.50107 Y68.17430
G01 X-93.49599 Y68.18004
G01 X-93.42503 Y68.26167
G01 X-93.39617 Y68.30102
G01 X-93.35822 Y68.35845
G01 X-93.32127 Y68.42085
G01 X-93.28439 Y68.49680
G01 X-93.25739 Y68.56012
G01 X-93.24461 Y68.59472
G01 X-93.21454 Y68.70284
G01 X-93.21243 Y68.71039
G01 X-93.19724 Y68.77762
G01 X-93.19706 Y68.77877
G01 X-93.18299 Y68.93381
G01 X-93.18070 Y68.96833
G01 X-93.18296 Y69.00282
G01 X-93.19704 Y69.15786
G01 X-93.19724 Y69.15900
G01 X-93.21243 Y69.22626
G01 X-93.24461 Y69.34196
G01 X-93.25739 Y69.37653
G01 X-93.28439 Y69.43985
G01 X-93.32127 Y69.51580
G01 X-93.35822 Y69.57820
G01 X-93.39617 Y69.63563
G01 X-93.42503 Y69.67498
G01 X-93.49599 Y69.75661
G01 X-93.54375 Y69.80635
G01 X-93.55322 Y69.81529
G01 X-93.66557 Y69.90510
G01 X-93.70275 Y69.93286
G01 X-93.72256 Y69.94394
G01 X-93.86066 Y70.01821
G01 X-93.87021 Y70.02324
G01 X-93.92487 Y70.04346
G01 X-94.05040 Y70.08402
G01 X-94.07473 Y70.08971
G01 X-94.14242 Y70.10208
G01 X-94.23790 Y70.11475
G01 X-94.29848 Y70.11773
G01 X-94.36739 Y70.11773
G01 X-94.42795 Y70.11475
G01 X-94.52342 Y70.10208
G01 X-94.59112 Y70.08971
G01 X-94.61545 Y70.08402
G01 X-94.74098 Y70.04346
G01 X-94.79566 Y70.02324
G01 X-94.80519 Y70.01821
G01 X-94.94329 Y69.94394
G01 X-94.96310 Y69.93289
G01 X-95.00028 Y69.90510
G01 X-95.11263 Y69.81531
G01 X-95.12210 Y69.80635
G01 X-95.16985 Y69.75661
G01 X-95.24082 Y69.67498
G01 X-95.26968 Y69.63563
G01 X-95.30762 Y69.57820
G01 X-95.34458 Y69.51580
G01 X-95.38146 Y69.43985
G01 X-95.40846 Y69.37653
G01 X-95.42124 Y69.34196
G01 X-95.45342 Y69.22626
G01 X-95.46861 Y69.15900
G01 X-95.46881 Y69.15786
G01 X-95.48288 Y69.00282
G01 X-95.48514 Y68.96833
G01 X-95.48286 Y68.93381
G01 X-95.46881 Y68.77879
G01 X-95.46861 Y68.77762
G01 X-95.45342 Y68.71039
G01 X-95.42124 Y68.59469
G01 X-95.40846 Y68.56012
G01 X-95.38146 Y68.49680
G01 X-95.34458 Y68.42083
G01 X-95.32360 Y68.38545
G01 X-95.30823 Y68.35812
G01 X-95.29673 Y68.33655
G01 X-95.27417 Y68.29731
G01 X-95.27311 Y68.29561
G01 X-95.20417 Y68.15189
G01 X-95.20343 Y68.14984
G01 X-95.17453 Y68.07955
G01 X-95.17737 Y68.07270
G01 X-95.28200 Y67.88951
G01 X-95.32937 Y67.82779
G01 X-95.39030 Y67.75824
G01 X-95.97275 Y67.17580
G01 X-96.00633 Y67.14435
G01 X-96.03564 Y67.11867
G01 X-96.12749 Y67.05019
G01 X-96.15642 Y67.04580
G01 X-96.23353 Y67.03566
G01 X-96.32578 Y67.02959
G01 X-99.89293 Y67.02959
G01 X-99.92738 Y67.02873
G01 X-99.96167 Y67.02705
G01 X-99.99565 Y67.02200
G01 X-100.06309 Y67.00859
G01 X-100.09639 Y67.00026
G01 X-100.12875 Y66.98867
G01 X-100.19235 Y66.96233
G01 X-100.22344 Y66.94763
G01 X-100.25285 Y66.93000
G01 X-100.31013 Y66.89172
G01 X-100.33771 Y66.87128
G01 X-100.36316 Y66.84821
G01 X-100.38806 Y66.82449
G01 X-103.65945 Y63.55310
G01 X-103.70784 Y63.50903
G01 X-103.75046 Y63.47367
G01 X-103.89326 Y63.38058
G01 X-103.96570 Y63.34393
G01 X-104.12272 Y63.28746
G01 X-104.13895 Y63.28165
G01 X-104.20692 Y63.30153
G01 X-104.22617 Y63.30903
G01 X-104.26618 Y63.36181
G01 X-104.30006 Y63.40926
G01 X-104.34850 Y63.48139
G01 X-104.39148 Y63.55330
G01 X-104.42808 Y63.62279
G01 X-104.46001 Y63.68304
G01 X-104.47108 Y63.70489
G01 X-104.49727 Y63.75879
G01 X-104.53423 Y63.82119
G01 X-104.57217 Y63.87865
G01 X-104.60103 Y63.91797
G01 X-104.67199 Y63.99960
G01 X-104.67702 Y64.00532
G01 X-104.70286 Y64.03438
G01 X-104.71825 Y64.05114
G01 X-104.72528 Y64.05858
G01 X-104.78535 Y64.13072
G01 X-104.79244 Y64.17443
G01 X-104.80260 Y64.25155
G01 X-104.80867 Y64.34377
G01 X-104.80867 Y70.23833
G01 X-104.80951 Y70.27274
G01 X-104.81121 Y70.30703
G01 X-104.81624 Y70.34104
G01 X-104.82968 Y70.40851
G01 X-104.83803 Y70.44183
G01 X-104.84959 Y70.47416
G01 X-104.87593 Y70.53777
G01 X-104.89061 Y70.56883
G01 X-104.90824 Y70.59827
G01 X-104.94652 Y70.65555
G01 X-104.96696 Y70.68310
G01 X-104.99005 Y70.70858
G01 X-105.01378 Y70.73347
G01 X-107.13150 Y72.85122
G01 X-107.15309 Y72.87378
G01 X-107.17110 Y72.89346
G01 X-107.24832 Y72.99466
G01 X-107.26554 Y73.02181
G01 X-107.27130 Y73.06839
G01 X-107.27608 Y73.12440
G01 X-107.27786 Y73.16288
G01 X-107.27999 Y73.19382
G01 X-107.29406 Y73.34889
G01 X-107.29424 Y73.35000
G01 X-107.30943 Y73.41726
G01 X-107.34161 Y73.53296
G01 X-107.35439 Y73.56753
G01 X-107.38139 Y73.63085
G01 X-107.41827 Y73.70682
G01 X-107.45522 Y73.76920
G01 X-107.45911 Y73.77568
G01 X-107.49109 Y73.82836
G01 X-107.50006 Y73.84355
G01 X-107.53346 Y73.90174
G01 X-107.56752 Y73.96852
G01 X-107.60186 Y74.04474
G01 X-107.61936 Y74.08620
G01 X-107.63882 Y74.13545
G01 X-107.61911 Y74.16395
G01 X-107.49188 Y74.31114
G01 X-107.47085 Y74.33037
G01 X-107.43874 Y74.36161
G01 X-107.41575 Y74.38533
G01 X-107.34684 Y74.44782
G01 X-107.30839 Y74.47835
G01 X-107.25629 Y74.52554
G01 X-107.20763 Y74.57421
G01 X-107.16051 Y74.62620
G01 X-107.16015 Y74.62666
G01 X-107.05175 Y74.76326
G01 X-107.03094 Y74.79084
G01 X-107.01344 Y74.82059
G01 X-106.92853 Y74.97337
G01 X-106.89843 Y75.03700
G01 X-106.88360 Y75.07057
G01 X-106.87209 Y75.10060
G01 X-106.84842 Y75.16674
G01 X-106.80039 Y75.33491
G01 X-106.79175 Y75.36831
G01 X-106.78695 Y75.40250
G01 X-106.76696 Y75.57621
G01 X-106.76351 Y75.64639
G01 X-106.76351 Y75.71525
G01 X-106.76696 Y75.78543
G01 X-106.78695 Y75.95917
G01 X-106.79173 Y75.99333
G01 X-106.80041 Y76.02676
G01 X-106.84842 Y76.19493
G01 X-106.87209 Y76.26107
G01 X-106.89843 Y76.32467
G01 X-106.92848 Y76.38822
G01 X-107.01344 Y76.54108
G01 X-107.03094 Y76.57085
G01 X-107.05175 Y76.59841
G01 X-107.16046 Y76.73539
G01 X-107.18687 Y76.76455
G01 X-107.21636 Y76.78030
G01 X-107.27809 Y76.80956
G01 X-107.29333 Y76.81588
G01 X-107.34898 Y76.84215
G01 X-107.50143 Y76.92366
G01 X-107.54791 Y76.94565
G01 X-107.57077 Y76.95513
G01 X-107.61550 Y76.97628
G01 X-107.76632 Y77.05690
G01 X-107.81105 Y77.07804
G01 X-107.83389 Y77.08751
G01 X-107.88034 Y77.10948
G01 X-108.03287 Y77.19102
G01 X-108.08847 Y77.21725
G01 X-108.10371 Y77.22358
G01 X-108.13417 Y77.23707
G01 X-108.20516 Y77.27067
G01 X-108.25827 Y77.27677
G01 X-108.32850 Y77.28022
G01 X-108.36294 Y77.28106
G01 X-109.16111 Y77.28106
G01 X-109.19556 Y77.28022
G01 X-109.26574 Y77.27677
G01 X-109.43945 Y77.25680
G01 X-109.47364 Y77.25200
G01 X-109.50704 Y77.24337
G01 X-109.67521 Y77.19533
G01 X-109.74135 Y77.17166
G01 X-109.80495 Y77.14532
G01 X-109.86850 Y77.11527
G01 X-110.02136 Y77.03031
G01 X-110.05113 Y77.01281
G01 X-110.07869 Y76.99201
G01 X-110.21565 Y76.88332
G01 X-110.26774 Y76.83610
G01 X-110.29266 Y76.81238
G01 X-112.00246 Y75.10258
G01 X-112.02621 Y75.07766
G01 X-112.07335 Y75.02564
G01 X-112.10569 Y74.98490
G01 X-112.18209 Y74.88861
G01 X-112.20292 Y74.86102
G01 X-112.22039 Y74.83128
G01 X-112.30538 Y74.67837
G01 X-112.33540 Y74.61487
G01 X-112.36174 Y74.55127
G01 X-112.38542 Y74.48513
G01 X-112.43345 Y74.31696
G01 X-112.44211 Y74.28353
G01 X-112.44688 Y74.24937
G01 X-112.46687 Y74.07576
G01 X-112.47033 Y74.00545
G01 X-112.47117 Y73.97101
G01 X-112.47117 Y69.99817
G01 X-112.47266 Y69.95225
G01 X-112.47523 Y69.91333
G01 X-112.49903 Y69.77061
G01 X-112.51968 Y69.69347
G01 X-112.61092 Y69.47760
G01 X-112.61257 Y69.47371
G01 X-112.62011 Y69.46845
G01 X-112.68691 Y69.42989
G01 X-112.76431 Y69.39380
G01 X-112.84678 Y69.37170
G01 X-112.93187 Y69.40028
G01 X-113.00899 Y69.43223
G01 X-113.19225 Y69.53690
G01 X-113.25394 Y69.58425
G01 X-113.32341 Y69.64513
G01 X-113.39578 Y69.71747
G01 X-113.42067 Y69.74117
G01 X-113.44615 Y69.76426
G01 X-113.47370 Y69.78471
G01 X-113.53098 Y69.82298
G01 X-113.56045 Y69.84064
G01 X-113.59148 Y69.85532
G01 X-113.63065 Y69.87241
G01 X-113.65509 Y69.88166
G01 X-113.66293 Y69.88448
G01 X-113.68742 Y69.89324
G01 X-113.72074 Y69.90157
G01 X-113.78821 Y69.91501
G01 X-113.82222 Y69.92004
G01 X-113.85651 Y69.92174
G01 X-113.89095 Y69.92258
G01 X-113.91203 Y69.92258
G01 X-113.92984 Y69.92281
G01 X-113.94482 Y69.92319
G01 X-114.05536 Y69.93472
G01 X-114.13250 Y69.94884
G01 X-114.27528 Y69.98897
G01 X-114.30154 Y70.05407
G01 X-114.30804 Y70.07231
G01 X-114.31734 Y70.09713
G01 X-114.34769 Y70.16688
G01 X-114.35656 Y70.18671
G01 X-114.41521 Y70.28910
G01 X-114.47515 Y70.34904
G01 X-114.54764 Y70.39288
G01 X-114.63380 Y70.41938
G01 X-114.65125 Y70.42141
G01 X-114.69194 Y70.42258
G01 X-116.39194 Y70.42258
G01 X-116.43258 Y70.42141
G01 X-116.45008 Y70.41935
G01 X-116.53621 Y70.39288
G01 X-116.59707 Y70.35692
G01 X-116.60870 Y70.34907
G01 X-116.66864 Y70.28910
G01 X-116.71248 Y70.21661
G01 X-116.73895 Y70.13048
G01 X-116.74101 Y70.11298
G01 X-116.74218 Y70.07231
G01 X-116.74218 Y68.37231
G01 X-116.74101 Y68.33167
G01 X-116.73895 Y68.31417
G01 X-116.71248 Y68.22804
G01 X-116.66864 Y68.15555
G01 X-116.60870 Y68.09561
G01 X-116.53621 Y68.05177
G01 X-116.45008 Y68.02530
G01 X-116.43258 Y68.02324
G01 X-116.39194 Y68.02207
G01 X-114.69194 Y68.02207
G01 X-114.65094 Y68.02327
G01 X-114.63979 Y68.02436
G01 X-114.62633 Y68.02581
G01 X-114.51244 Y68.03909
G01 X-114.42885 Y68.05309
G01 X-114.30012 Y68.08103
G01 X-114.28452 Y68.10008
G01 X-114.25092 Y68.16292
G01 X-114.25092 Y68.04849
G01 X-114.21490 Y67.97452
G01 X-114.18295 Y67.89741
G01 X-114.12740 Y67.69383
G01 X-114.11724 Y67.61672
G01 X-114.11117 Y67.52446
G01 X-114.11117 Y63.23664
G01 X-114.11457 Y63.16755
G01 X-114.12031 Y63.10943
G01 X-114.14081 Y62.99491
G01 X-114.14482 Y62.99099
G01 X-114.18107 Y62.95587
G01 X-114.19778 Y62.93913
G01 X-114.23535 Y62.90032
G01 X-114.30065 Y62.84070
G01 X-114.34078 Y62.80433
G01 X-114.38940 Y62.75571
G01 X-114.42565 Y62.71571
G01 X-114.51401 Y62.60436
G01 X-114.52445 Y62.59089
G01 X-114.53481 Y62.57682
G01 X-114.55232 Y62.54705
G01 X-114.62138 Y62.42277
G01 X-114.64444 Y62.37403
G01 X-114.67078 Y62.31043
G01 X-114.67241 Y62.30591
G01 X-114.68897 Y62.25960
G01 X-114.70078 Y62.21825
G01 X-114.72798 Y62.12292
G01 X-114.73664 Y62.08955
G01 X-114.74142 Y62.05539
G01 X-114.75770 Y61.91396
G01 X-114.76034 Y61.86026
G01 X-114.76118 Y61.82582
G01 X-114.76118 Y59.34548
G01 X-114.76268 Y59.29954
G01 X-114.76524 Y59.26062
G01 X-114.78178 Y59.14721
G01 X-114.79910 Y59.12372
G01 X-114.84647 Y59.06200
G01 X-114.90741 Y58.99245
G01 X-115.78853 Y58.11130
G01 X-115.82211 Y58.07988
G01 X-115.85142 Y58.05417
G01 X-115.94330 Y57.98570
G01 X-115.97220 Y57.98130
G01 X-116.04931 Y57.97117
G01 X-116.14157 Y57.96507
G01 X-118.50341 Y57.96507
G01 X-118.59566 Y57.97117
G01 X-118.67278 Y57.98130
G01 X-118.87633 Y58.03688
G01 X-118.92127 Y58.05547
G01 X-118.92754 Y58.07361
G01 X-118.93310 Y58.08918
G01 X-118.94499 Y58.12458
G01 X-118.95754 Y58.16471
G01 X-118.98644 Y58.29497
G01 X-118.99660 Y58.37208
G01 X-119.00267 Y58.46433
G01 X-119.00267 Y60.26471
G01 X-119.00351 Y60.29913
G01 X-119.00377 Y60.30428
G01 X-119.00786 Y60.34792
G01 X-119.01012 Y60.36870
G01 X-119.02213 Y60.41526
G01 X-119.03597 Y60.46227
G01 X-119.04408 Y60.48795
G01 X-119.06269 Y60.52585
G01 X-119.08558 Y60.56918
G01 X-119.10046 Y60.59588
G01 X-119.12383 Y60.62613
G01 X-119.15487 Y60.66405
G01 X-119.17740 Y60.69026
G01 X-119.20351 Y60.71272
G01 X-119.24143 Y60.74375
G01 X-119.29721 Y60.78495
G01 X-119.29848 Y60.78579
G01 X-119.33745 Y60.81366
G01 X-119.35165 Y60.82453
G01 X-119.39691 Y60.85666
G01 X-119.39762 Y60.85711
G01 X-119.43714 Y60.88483
G01 X-119.46343 Y61.00647
G01 X-119.47359 Y61.08358
G01 X-119.47966 Y61.17581
G01 X-119.47966 Y61.94530
G01 X-119.48050 Y61.97979
G01 X-119.48210 Y62.01208
G01 X-119.49048 Y62.07731
G01 X-119.50234 Y62.14403
G01 X-119.50265 Y62.14505
G01 X-119.53204 Y62.23857
G01 X-119.54316 Y62.27118
G01 X-119.55838 Y62.30217
G01 X-119.60374 Y62.38904
G01 X-119.60427 Y62.39008
G01 X-119.61159 Y62.40149
G01 X-119.64303 Y62.44561
G01 X-119.68324 Y62.49765
G01 X-119.70496 Y62.52160
G01 X-119.72868 Y62.54654
G01 X-121.64369 Y64.46155
G01 X-121.66863 Y64.48528
G01 X-121.69261 Y64.50702
G01 X-121.74463 Y64.54720
G01 X-121.80021 Y64.58601
G01 X-121.80117 Y64.58652
G01 X-121.88806 Y64.63186
G01 X-121.91903 Y64.64707
G01 X-121.95167 Y64.65820
G01 X-122.04519 Y64.68759
G01 X-122.04626 Y64.68792
G01 X-122.11293 Y64.69978
G01 X-122.17821 Y64.70816
G01 X-122.21044 Y64.70974
G01 X-122.27940 Y64.70974
G01 X-122.31166 Y64.70816
G01 X-122.37691 Y64.69978
G01 X-122.44361 Y64.68789
G01 X-122.44463 Y64.68759
G01 X-122.47727 Y64.67733
G01 X-122.53815 Y64.65822
G01 X-122.57082 Y64.64705
G01 X-122.60175 Y64.63188
G01 X-122.63617 Y64.61390
G01 X-122.68981 Y64.58873
G01 X-122.71212 Y64.57938
G01 X-122.73043 Y64.57141
G01 X-122.78031 Y64.56549
G01 X-122.86332 Y64.56056
G01 X-135.40145 Y64.56056
G01 X-135.49368 Y64.56666
G01 X-135.57079 Y64.57679
G01 X-135.77435 Y64.63237
G01 X-135.81290 Y64.64834
G01 X-135.82888 Y64.68690
G01 X-135.88445 Y64.89048
G01 X-135.89461 Y64.96765
G01 X-135.90068 Y65.05982
G01 X-135.90068 Y73.09235
G01 X-135.90013 Y73.11983
G01 X-135.89949 Y73.13598
G01 X-135.89893 Y73.14210
G01 X-135.89883 Y73.14315
G01 X-135.89583 Y73.17073
G01 X-135.89108 Y73.20766
G01 X-135.88951 Y73.23979
G01 X-135.88867 Y73.27431
G01 X-135.88867 Y74.46704
G01 X-135.88859 Y74.47682
G01 X-135.88847 Y74.48503
G01 X-135.87960 Y74.58719
G01 X-135.87117 Y74.64004
G01 X-135.85928 Y74.66168
G01 X-135.80871 Y74.74114
G01 X-135.80218 Y74.75000
G01 X-135.79400 Y74.76140
G01 X-135.76426 Y74.80740
G01 X-135.72728 Y74.86981
G01 X-135.69040 Y74.94576
G01 X-135.66337 Y75.00916
G01 X-135.65060 Y75.04373
G01 X-135.61844 Y75.15940
G01 X-135.60323 Y75.22671
G01 X-135.60302 Y75.22785
G01 X-135.58898 Y75.38287
G01 X-135.58672 Y75.41733
G01 X-135.58898 Y75.45178
G01 X-135.60305 Y75.60687
G01 X-135.60323 Y75.60796
G01 X-135.61844 Y75.67527
G01 X-135.65060 Y75.79094
G01 X-135.66337 Y75.82551
G01 X-135.69040 Y75.88889
G01 X-135.72728 Y75.96483
G01 X-135.76426 Y76.02724
G01 X-135.80218 Y76.08464
G01 X-135.80876 Y76.09363
G01 X-135.81450 Y76.10153
G01 X-135.81925 Y76.10824
G01 X-135.87191 Y76.19432
G01 X-135.87244 Y76.19823
G01 X-135.88257 Y76.27535
G01 X-135.88867 Y76.36760
G01 X-135.88867 Y77.51504
G01 X-135.88859 Y77.52482
G01 X-135.88847 Y77.53303
G01 X-135.87960 Y77.63519
G01 X-135.87117 Y77.68804
G01 X-135.85928 Y77.70968
G01 X-135.80876 Y77.78908
G01 X-135.80218 Y77.79800
G01 X-135.76426 Y77.85543
G01 X-135.72728 Y77.91784
G01 X-135.69040 Y77.99376
G01 X-135.66337 Y78.05716
G01 X-135.65060 Y78.09170
G01 X-135.61844 Y78.20742
G01 X-135.61219 Y78.23148
G01 X-135.60323 Y78.27473
G01 X-135.60302 Y78.27580
G01 X-135.58898 Y78.43089
G01 X-135.58672 Y78.46533
G01 X-135.58898 Y78.49980
G01 X-135.60305 Y78.65489
G01 X-135.60323 Y78.65596
G01 X-135.61844 Y78.72327
G01 X-135.65060 Y78.83897
G01 X-135.66337 Y78.87351
G01 X-135.69040 Y78.93689
G01 X-135.72728 Y79.01283
G01 X-135.76424 Y79.07526
G01 X-135.80218 Y79.13264
G01 X-135.80876 Y79.14161
G01 X-135.81450 Y79.14953
G01 X-135.81925 Y79.15624
G01 X-135.87191 Y79.24232
G01 X-135.87244 Y79.24626
G01 X-135.88257 Y79.32335
G01 X-135.88867 Y79.41557
G01 X-135.88867 Y83.94231
G01 X-135.88951 Y83.97680
G01 X-135.89108 Y84.00906
G01 X-135.89947 Y84.07431
G01 X-135.91133 Y84.14102
G01 X-135.91166 Y84.14206
G01 X-135.94105 Y84.23558
G01 X-135.95217 Y84.26822
G01 X-135.96739 Y84.29918
G01 X-136.01272 Y84.38607
G01 X-136.01323 Y84.38704
G01 X-136.05204 Y84.44261
G01 X-136.09223 Y84.49463
G01 X-136.11397 Y84.51861
G01 X-136.13769 Y84.54355
G01 X-136.74668 Y85.15255
G01 X-136.77163 Y85.17627
G01 X-136.79560 Y85.19801
G01 X-136.84762 Y85.23819
G01 X-136.90322 Y85.27700
G01 X-136.90416 Y85.27751
G01 X-136.99106 Y85.32285
G01 X-137.02202 Y85.33807
G01 X-137.05466 Y85.34919
G01 X-137.14818 Y85.37858
G01 X-137.14925 Y85.37891
G01 X-137.21592 Y85.39075
G01 X-137.28120 Y85.39915
G01 X-137.31343 Y85.40073
G01 X-137.34793 Y85.40157
G01 X-138.26967 Y85.40157
G01 X-138.31562 Y85.40309
G01 X-138.35453 Y85.40563
G01 X-138.49725 Y85.42943
G01 X-138.57437 Y85.45011
G01 X-138.61879 Y85.46331
G01 X-138.70317 Y85.53862
G01 X-138.74531 Y85.58175
G01 X-138.76286 Y85.59920
G01 X-138.80264 Y85.63771
G01 X-138.87701 Y85.71836
G01 X-138.88201 Y85.72443
G01 X-138.88343 Y85.72613
G01 X-138.96354 Y85.75933
G01 X-139.11363 Y85.80484
G01 X-139.19636 Y85.82133
G01 X-140.42737 Y85.82133
G01 X-140.51025 Y85.83779
G01 X-140.66031 Y85.88330
G01 X-140.74035 Y85.91645
G01 X-140.74182 Y85.91823
G01 X-140.74675 Y85.92422
G01 X-140.82130 Y86.00502
G01 X-140.86092 Y86.04335
G01 X-140.87865 Y86.06100
G01 X-140.92074 Y86.10408
G01 X-141.00504 Y86.17934
G01 X-141.04942 Y86.19255
G01 X-141.12653 Y86.21320
G01 X-141.26936 Y86.23702
G01 X-141.30827 Y86.23956
G01 X-141.35419 Y86.24109
G01 X-141.41190 Y86.24109
G01 X-141.44639 Y86.24193
G01 X-141.47865 Y86.24350
G01 X-141.54390 Y86.25188
G01 X-141.61063 Y86.26374
G01 X-141.61162 Y86.26407
G01 X-141.70514 Y86.29344
G01 X-141.73778 Y86.30459
G01 X-141.76875 Y86.31978
G01 X-141.85564 Y86.36514
G01 X-141.85660 Y86.36565
G01 X-141.91220 Y86.40446
G01 X-141.96425 Y86.44467
G01 X-141.98818 Y86.46636
G01 X-142.01312 Y86.49011
G01 X-142.94014 Y87.41711
G01 X-142.96389 Y87.44205
G01 X-142.98561 Y87.46600
G01 X-143.02579 Y87.51802
G01 X-143.06460 Y87.57365
G01 X-143.06511 Y87.57459
G01 X-143.11045 Y87.66148
G01 X-143.12569 Y87.69247
G01 X-143.13681 Y87.72508
G01 X-143.16618 Y87.81861
G01 X-143.16651 Y87.81962
G01 X-143.17837 Y87.88632
G01 X-143.18675 Y87.95160
G01 X-143.18833 Y87.98383
G01 X-143.18919 Y88.01830
G01 X-143.18919 Y94.87630
G01 X-143.18833 Y94.91079
G01 X-143.18673 Y94.94310
G01 X-143.17837 Y95.00830
G01 X-143.16651 Y95.07500
G01 X-143.16618 Y95.07605
G01 X-143.13681 Y95.16957
G01 X-143.12569 Y95.20218
G01 X-143.11045 Y95.23317
G01 X-143.06511 Y95.32006
G01 X-143.06460 Y95.32100
G01 X-143.02579 Y95.37663
G01 X-142.98561 Y95.42865
G01 X-142.96389 Y95.45260
G01 X-142.94014 Y95.47754
G01 X-141.69813 Y96.71955
G01 X-141.67319 Y96.74330
G01 X-141.64924 Y96.76502
G01 X-141.59722 Y96.80520
G01 X-141.54162 Y96.84401
G01 X-141.54065 Y96.84452
G01 X-141.45376 Y96.88986
G01 X-141.43377 Y96.89989
G01 X-141.42280 Y96.90507
G01 X-141.39016 Y96.91622
G01 X-141.29664 Y96.94559
G01 X-141.29562 Y96.94589
G01 X-141.22892 Y96.95778
G01 X-141.16364 Y96.96616
G01 X-141.13141 Y96.96774
G01 X-141.09694 Y96.96857
G01 X-140.90563 Y96.96857
G01 X-140.81340 Y96.97467
G01 X-140.73629 Y96.98480
G01 X-140.73100 Y96.98554
G01 X-140.63420 Y97.04622
G01 X-140.62166 Y97.05557
G01 X-140.61772 Y97.05846
G01 X-140.59826 Y97.07274
G01 X-140.58411 Y97.08285
G01 X-140.56433 Y97.09390
G01 X-140.42620 Y97.16819
G01 X-140.41663 Y97.17325
G01 X-140.36197 Y97.19347
G01 X-140.23644 Y97.23403
G01 X-140.21211 Y97.23972
G01 X-140.14436 Y97.25211
G01 X-140.04894 Y97.26476
G01 X-139.98833 Y97.26774
G01 X-139.91952 Y97.26774
G01 X-139.85892 Y97.26476
G01 X-139.76347 Y97.25211
G01 X-139.69570 Y97.23972
G01 X-139.67139 Y97.23403
G01 X-139.54586 Y97.19347
G01 X-139.49120 Y97.17325
G01 X-139.48165 Y97.16819
G01 X-139.34353 Y97.09390
G01 X-139.32377 Y97.08285
G01 X-139.28658 Y97.05511
G01 X-139.17421 Y96.96530
G01 X-139.16474 Y96.95636
G01 X-139.11701 Y96.90660
G01 X-139.04604 Y96.82496
G01 X-139.01719 Y96.78564
G01 X-138.97927 Y96.72824
G01 X-138.94226 Y96.66581
G01 X-138.90540 Y96.58989
G01 X-138.87838 Y96.52651
G01 X-138.86560 Y96.49194
G01 X-138.83342 Y96.37627
G01 X-138.81823 Y96.30896
G01 X-138.81805 Y96.30789
G01 X-138.80398 Y96.15278
G01 X-138.80172 Y96.11833
G01 X-138.80398 Y96.08387
G01 X-138.81805 Y95.92877
G01 X-138.81823 Y95.92771
G01 X-138.83342 Y95.86040
G01 X-138.86560 Y95.74470
G01 X-138.87838 Y95.71013
G01 X-138.90540 Y95.64676
G01 X-138.94226 Y95.57084
G01 X-138.97927 Y95.50840
G01 X-139.01719 Y95.45100
G01 X-139.04604 Y95.41168
G01 X-139.11701 Y95.33005
G01 X-139.15092 Y95.29372
G01 X-139.16474 Y95.28029
G01 X-139.17424 Y95.27132
G01 X-139.28658 Y95.18153
G01 X-139.32374 Y95.15379
G01 X-139.34358 Y95.14272
G01 X-139.48168 Y95.06845
G01 X-139.49120 Y95.06342
G01 X-139.54581 Y95.04323
G01 X-139.58747 Y95.02974
G01 X-139.67139 Y95.00264
G01 X-139.69565 Y94.99695
G01 X-139.71208 Y94.99332
G01 X-139.76347 Y94.98455
G01 X-139.85894 Y94.97188
G01 X-139.91952 Y94.96891
G01 X-139.98833 Y94.96891
G01 X-140.04891 Y94.97188
G01 X-140.14436 Y94.98455
G01 X-140.21216 Y94.99695
G01 X-140.23644 Y95.00264
G01 X-140.36202 Y95.04323
G01 X-140.41665 Y95.06342
G01 X-140.42618 Y95.06845
G01 X-140.43560 Y95.07353
G01 X-140.52013 Y95.11204
G01 X-140.57047 Y95.13114
G01 X-140.59275 Y95.14000
G01 X-140.63941 Y95.15946
G01 X-140.73164 Y95.19164
G01 X-140.79092 Y95.15948
G01 X-140.85925 Y95.11874
G01 X-140.97119 Y95.03701
G01 X-140.99727 Y95.01384
G01 X-141.02722 Y94.98560
G01 X-141.34246 Y94.67036
G01 X-141.40337 Y94.60086
G01 X-141.45071 Y94.53917
G01 X-141.46806 Y94.51562
G01 X-141.48462 Y94.40216
G01 X-141.48716 Y94.36325
G01 X-141.48868 Y94.31732
G01 X-141.48868 Y91.08644
G01 X-141.48259 Y90.99421
G01 X-141.47245 Y90.91710
G01 X-141.41693 Y90.71365
G01 X-141.38498 Y90.63651
G01 X-141.34893 Y90.56902
G01 X-141.34065 Y90.55352
G01 X-141.27096 Y90.51329
G01 X-141.19062 Y90.48406
G01 X-141.17858 Y90.48083
G01 X-141.13895 Y90.49358
G01 X-141.10553 Y90.50372
G01 X-141.04378 Y90.52139
G01 X-140.90266 Y90.57567
G01 X-140.89046 Y90.58174
G01 X-140.83819 Y90.60526
G01 X-140.82440 Y90.61083
G01 X-140.76181 Y90.63971
G01 X-140.68376 Y90.68045
G01 X-140.65277 Y90.69566
G01 X-140.62008 Y90.70681
G01 X-140.48064 Y90.75063
G01 X-140.47025 Y90.75302
G01 X-140.40238 Y90.76513
G01 X-140.30220 Y90.77798
G01 X-140.24632 Y90.78073
G01 X-140.21190 Y90.78157
G01 X-139.41190 Y90.78157
G01 X-139.37751 Y90.78073
G01 X-139.32168 Y90.77798
G01 X-139.22148 Y90.76513
G01 X-139.15775 Y90.75393
G01 X-139.15364 Y90.75302
G01 X-139.14315 Y90.75060
G01 X-139.00375 Y90.70681
G01 X-138.97106 Y90.69566
G01 X-138.94005 Y90.68042
G01 X-138.81048 Y90.61281
G01 X-138.80142 Y90.60712
G01 X-138.74493 Y90.56775
G01 X-138.66494 Y90.50595
G01 X-138.62354 Y90.46846
G01 X-138.57482 Y90.41974
G01 X-138.53728 Y90.37832
G01 X-138.47553 Y90.29836
G01 X-138.43609 Y90.24179
G01 X-138.43045 Y90.23277
G01 X-138.36278 Y90.10313
G01 X-138.34935 Y90.07598
G01 X-138.34762 Y90.07225
G01 X-138.33647 Y90.03956
G01 X-138.29263 Y89.90003
G01 X-138.29024 Y89.88970
G01 X-138.27812 Y89.82178
G01 X-138.26525 Y89.72157
G01 X-138.26250 Y89.66572
G01 X-138.26250 Y89.59691
G01 X-138.26525 Y89.54108
G01 X-138.27812 Y89.44088
G01 X-138.29024 Y89.37298
G01 X-138.29263 Y89.36262
G01 X-138.33647 Y89.22310
G01 X-138.34759 Y89.19048
G01 X-138.36281 Y89.15950
G01 X-138.43045 Y89.02988
G01 X-138.43611 Y89.02086
G01 X-138.47553 Y88.96430
G01 X-138.53731 Y88.88434
G01 X-138.57485 Y88.84291
G01 X-138.62351 Y88.79424
G01 X-138.66931 Y88.75272
G01 X-138.71925 Y88.70702
G01 X-138.73873 Y88.68741
G01 X-138.77523 Y88.65310
G01 X-138.79220 Y88.63821
G01 X-138.90502 Y88.51657
G01 X-138.92468 Y88.49082
G01 X-138.96796 Y88.43783
G01 X-138.98196 Y88.42178
G01 X-138.98618 Y88.41660
G01 X-138.98635 Y88.41639
G01 X-139.11363 Y88.37779
G01 X-139.19636 Y88.36133
G01 X-139.36555 Y88.36133
G01 X-139.41190 Y88.36130
G01 X-140.25818 Y88.36130
G01 X-140.42737 Y88.36133
G01 X-140.51025 Y88.37779
G01 X-140.66031 Y88.42330
G01 X-140.74906 Y88.46006
G01 X-140.88737 Y88.53400
G01 X-140.96725 Y88.58736
G01 X-141.08848 Y88.68685
G01 X-141.15640 Y88.75477
G01 X-141.25589 Y88.87601
G01 X-141.30926 Y88.95586
G01 X-141.34891 Y89.03003
G01 X-141.36710 Y89.10273
G01 X-141.38521 Y89.19351
G01 X-141.40847 Y89.35033
G01 X-141.41670 Y89.43389
G01 X-141.42442 Y89.59069
G01 X-141.42442 Y89.67192
G01 X-141.41673 Y89.82876
G01 X-141.40847 Y89.91233
G01 X-141.38521 Y90.06915
G01 X-141.36712 Y90.15988
G01 X-141.34891 Y90.23257
G01 X-141.30926 Y90.30676
G01 X-141.25589 Y90.38662
G01 X-141.17858 Y90.48083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-141.34893 Y90.56902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-141.34893 Y90.56902
G01 X-141.34891 Y90.23257
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-140.42737 Y88.36133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-140.42737 Y88.36133
G01 X-140.51025 Y88.34484
G01 X-140.66031 Y88.29933
G01 X-140.74906 Y88.26255
G01 X-140.88737 Y88.18863
G01 X-140.96725 Y88.13527
G01 X-140.99034 Y88.11632
G01 X-141.01589 Y88.09534
G01 X-141.34893 Y88.42838
G01 X-141.34891 Y89.03003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-152.32514 Y90.09272 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-152.32514 Y90.09272
G01 X-152.54635 Y90.31390
G01 X-152.57324 Y90.33831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-152.21798 Y90.33831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-152.21798 Y90.33831
G01 X-152.57324 Y90.33831
G01 X-152.58475 Y90.34276
G01 X-152.78079 Y90.41291
G01 X-152.85986 Y90.43696
G01 X-153.05587 Y90.48606
G01 X-153.12171 Y90.49919
G01 X-153.31774 Y90.52825
G01 X-153.37596 Y90.53402
G01 X-153.57200 Y90.54364
G01 X-153.59994 Y90.54433
G01 X-156.23793 Y90.54433
G01 X-156.26585 Y90.54502
G01 X-156.46186 Y90.55464
G01 X-156.52007 Y90.56041
G01 X-156.71611 Y90.58947
G01 X-156.78195 Y90.60260
G01 X-156.97557 Y90.65111
G01 X-156.97755 Y90.65243
G01 X-157.03887 Y90.69787
G01 X-157.17120 Y90.80651
G01 X-157.19066 Y90.82195
G01 X-157.22096 Y90.84527
G01 X-157.23173 Y90.85337
G01 X-157.47047 Y91.03044
G01 X-157.54436 Y91.07976
G01 X-157.67445 Y91.15774
G01 X-158.01271 Y91.49592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-158.12543 Y91.24042 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-158.12543 Y91.24042
G01 X-157.90928 Y91.21913
G01 X-157.81507 Y91.20039
G01 X-157.67445 Y91.15774
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-156.17590 Y93.87348 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-156.17590 Y93.87348
G01 X-156.29295 Y93.99050
G01 X-156.29112 Y93.99964
G01 X-156.26229 Y94.29228
G01 X-156.26229 Y94.38834
G01 X-156.29112 Y94.68097
G01 X-156.29295 Y94.69014
G01 X-156.17593 Y94.80714
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-158.33661 Y96.80988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-158.33661 Y96.80988
G01 X-158.31895 Y96.87848
G01 X-158.31893 Y96.87848
G01 X-157.67456 Y97.52285
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-156.89734 Y100.91032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-156.89734 Y100.91032
G01 X-156.90844 Y100.92142
G01 X-157.08497 Y101.06219
G01 X-157.27611 Y101.18228
G01 X-157.47953 Y101.28025
G01 X-157.69261 Y101.35482
G01 X-157.90991 Y101.40443
G01 X-157.90991 Y101.37918
G01 X-157.90928 Y101.37913
G01 X-157.81507 Y101.36039
G01 X-157.53366 Y101.27504
G01 X-157.44494 Y101.23826
G01 X-157.18561 Y101.09966
G01 X-157.10572 Y101.04629
G01 X-156.94004 Y100.91032
G01 X-156.89734 Y100.91032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.58992 Y101.37921 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.58992 Y101.37921
G01 X-159.58992 Y101.40443
G01 X-159.80722 Y101.35482
G01 X-160.02032 Y101.28025
G01 X-160.22375 Y101.18228
G01 X-160.41489 Y101.06219
G01 X-160.59139 Y100.92145
G01 X-160.75100 Y100.76181
G01 X-160.89177 Y100.58528
G01 X-161.01189 Y100.39415
G01 X-161.07633 Y100.26034
G01 X-161.04917 Y100.26034
G01 X-160.92929 Y100.48465
G01 X-160.87592 Y100.56453
G01 X-160.68938 Y100.79183
G01 X-160.62144 Y100.85975
G01 X-160.39413 Y101.04629
G01 X-160.31428 Y101.09966
G01 X-160.05494 Y101.23826
G01 X-159.96619 Y101.27504
G01 X-159.68481 Y101.36039
G01 X-159.59060 Y101.37913
G01 X-159.58992 Y101.37921
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.43436 Y93.16464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.43436 Y93.16464
G01 X-153.20652 Y93.31831
G01 X-151.16649 Y93.31831
G01 X-151.17040 Y93.31997
G01 X-151.17561 Y93.32738
G01 X-151.21419 Y93.39418
G01 X-151.25031 Y93.47163
G01 X-151.27243 Y93.55415
G01 X-151.27368 Y93.56848
G01 X-151.27269 Y93.57089
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.71343 Y95.77162 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.71343 Y95.77162
G01 X-153.68594 Y95.75052
G01 X-153.65785 Y95.72827
G01 X-153.52506 Y95.61938
G01 X-153.49504 Y95.59337
G01 X-153.46085 Y95.56210
G01 X-153.40924 Y95.50962
G01 X-153.37865 Y95.46124
G01 X-153.37108 Y95.44777
G01 X-153.36197 Y95.43055
G01 X-153.31807 Y95.34478
G01 X-153.29379 Y95.29281
G01 X-153.28371 Y95.26921
G01 X-153.27558 Y95.25070
G01 X-153.09613 Y95.20559
G01 X-153.02191 Y95.19619
G01 X-152.93324 Y95.19057
G01 X-152.45092 Y95.19057
G01 X-152.35867 Y95.19667
G01 X-152.28155 Y95.20680
G01 X-152.25262 Y95.21120
G01 X-152.16077 Y95.27968
G01 X-152.13146 Y95.30536
G01 X-152.09788 Y95.33680
G01 X-151.39217 Y96.04252
G01 X-151.33129 Y96.11198
G01 X-151.28392 Y96.17371
G01 X-151.27736 Y96.18237
G01 X-151.25498 Y96.27828
G01 X-151.25481 Y96.27935
G01 X-151.24963 Y96.30896
G01 X-151.23441 Y96.37632
G01 X-151.20223 Y96.49194
G01 X-151.18945 Y96.52656
G01 X-151.16245 Y96.58983
G01 X-151.12557 Y96.66581
G01 X-151.08861 Y96.72819
G01 X-151.05067 Y96.78564
G01 X-151.02181 Y96.82496
G01 X-150.95085 Y96.90660
G01 X-150.90312 Y96.95633
G01 X-150.89359 Y96.96532
G01 X-150.78127 Y97.05511
G01 X-150.74411 Y97.08285
G01 X-150.72433 Y97.09390
G01 X-150.58620 Y97.16819
G01 X-150.57663 Y97.17325
G01 X-150.52197 Y97.19347
G01 X-150.39644 Y97.23403
G01 X-150.37211 Y97.23972
G01 X-150.30436 Y97.25211
G01 X-150.20894 Y97.26476
G01 X-150.14833 Y97.26774
G01 X-150.07952 Y97.26774
G01 X-150.01892 Y97.26476
G01 X-149.92347 Y97.25211
G01 X-149.85570 Y97.23972
G01 X-149.83139 Y97.23403
G01 X-149.70586 Y97.19347
G01 X-149.65120 Y97.17325
G01 X-149.64165 Y97.16819
G01 X-149.50353 Y97.09390
G01 X-149.48377 Y97.08285
G01 X-149.44658 Y97.05511
G01 X-149.33421 Y96.96530
G01 X-149.32474 Y96.95636
G01 X-149.27701 Y96.90660
G01 X-149.20604 Y96.82496
G01 X-149.17719 Y96.78564
G01 X-149.13927 Y96.72824
G01 X-149.10226 Y96.66581
G01 X-149.06540 Y96.58989
G01 X-149.03838 Y96.52651
G01 X-149.02560 Y96.49194
G01 X-148.99342 Y96.37627
G01 X-148.97823 Y96.30896
G01 X-148.97805 Y96.30789
G01 X-148.96398 Y96.15278
G01 X-148.96172 Y96.11833
G01 X-148.96398 Y96.08387
G01 X-148.97805 Y95.92877
G01 X-148.97823 Y95.92771
G01 X-148.99342 Y95.86040
G01 X-149.02560 Y95.74470
G01 X-149.03838 Y95.71013
G01 X-149.06540 Y95.64676
G01 X-149.10226 Y95.57084
G01 X-149.13927 Y95.50840
G01 X-149.17719 Y95.45100
G01 X-149.20604 Y95.41168
G01 X-149.27701 Y95.33005
G01 X-149.31092 Y95.29372
G01 X-149.32474 Y95.28029
G01 X-149.33424 Y95.27132
G01 X-149.44658 Y95.18153
G01 X-149.48374 Y95.15379
G01 X-149.50358 Y95.14272
G01 X-149.64168 Y95.06845
G01 X-149.65120 Y95.06342
G01 X-149.70581 Y95.04323
G01 X-149.74747 Y95.02974
G01 X-149.83134 Y95.00264
G01 X-149.84495 Y94.99946
G01 X-149.85565 Y94.99695
G01 X-149.91270 Y94.98605
G01 X-149.92347 Y94.98445
G01 X-150.00398 Y94.96769
G01 X-150.05006 Y94.95529
G01 X-150.07518 Y94.93789
G01 X-150.16113 Y94.86789
G01 X-150.17152 Y94.85801
G01 X-150.18346 Y94.84635
G01 X-150.99898 Y94.03084
G01 X-151.05981 Y93.96142
G01 X-151.10718 Y93.89972
G01 X-151.21191 Y93.71638
G01 X-151.22831 Y93.67673
G01 X-151.24480 Y93.63927
G01 X-151.24782 Y93.63274
G01 X-151.27269 Y93.57092
G01 X-151.27269 Y93.57089
G01 X-151.30330 Y93.54582
G01 X-151.38315 Y93.49246
G01 X-151.46959 Y93.44623
G01 X-151.55834 Y93.40948
G01 X-151.65214 Y93.38103
G01 X-151.74635 Y93.36228
G01 X-151.84391 Y93.35268
G01 X-151.89194 Y93.35032
G01 X-153.19963 Y93.35032
G01 X-153.20250 Y93.32101
G01 X-153.43436 Y93.16464
G01 X-153.68594 Y93.10808
G01 X-155.68594 Y93.10808
G01 X-155.70766 Y93.10851
G01 X-155.97474 Y93.38783
G01 X-156.17590 Y93.87348
G01 X-156.17593 Y94.80714
G01 X-155.97476 Y95.29281
G01 X-155.68594 Y95.58166
G01 X-155.67403 Y95.58656
G01 X-154.68594 Y95.58656
G01 X-154.65704 Y95.58727
G01 X-154.46100 Y95.59692
G01 X-154.40085 Y95.60287
G01 X-154.20481 Y95.63192
G01 X-154.13700 Y95.64546
G01 X-153.94098 Y95.69456
G01 X-153.85981 Y95.71925
G01 X-153.71343 Y95.77162
G01 X-153.70583 Y95.79527
G01 X-153.69493 Y95.82740
G01 X-153.66382 Y95.91468
G01 X-153.62130 Y96.01328
G01 X-153.58526 Y96.08346
G01 X-153.57774 Y96.09766
G01 X-153.54449 Y96.15910
G01 X-153.54078 Y96.16583
G01 X-153.47545 Y96.28341
G01 X-153.45239 Y96.33215
G01 X-153.44104 Y96.35748
G01 X-153.43557 Y96.37030
G01 X-153.43136 Y96.38039
G01 X-153.42778 Y96.39055
G01 X-153.42600 Y96.39573
G01 X-153.42315 Y96.40386
G01 X-153.40789 Y96.44650
G01 X-153.38475 Y96.52755
G01 X-153.38218 Y96.53632
G01 X-153.37995 Y96.54378
G01 X-153.37718 Y96.55280
G01 X-153.36976 Y96.57642
G01 X-153.36814 Y96.58305
G01 X-153.36740 Y96.58595
G01 X-153.36374 Y96.60111
G01 X-153.36019 Y96.61671
G01 X-153.35541 Y96.65077
G01 X-153.34947 Y96.70248
G01 X-153.34894 Y96.70700
G01 X-153.34845 Y96.71087
G01 X-153.34789 Y96.71546
G01 X-153.33984 Y96.77813
G01 X-153.33651 Y96.84589
G01 X-153.33651 Y96.91475
G01 X-153.33984 Y96.98254
G01 X-153.34787 Y97.04516
G01 X-153.34894 Y97.05366
G01 X-153.34947 Y97.05819
G01 X-153.35541 Y97.10987
G01 X-153.36019 Y97.14396
G01 X-153.36372 Y97.15943
G01 X-153.36735 Y97.17459
G01 X-153.36814 Y97.17762
G01 X-153.36976 Y97.18427
G01 X-153.37721 Y97.20792
G01 X-153.37995 Y97.21688
G01 X-153.38218 Y97.22435
G01 X-153.38475 Y97.23312
G01 X-153.40789 Y97.31417
G01 X-153.42318 Y97.35686
G01 X-153.42600 Y97.36494
G01 X-153.42770 Y97.36987
G01 X-153.43136 Y97.38023
G01 X-153.43557 Y97.39034
G01 X-153.44106 Y97.40324
G01 X-153.45242 Y97.42852
G01 X-153.47545 Y97.47726
G01 X-153.54452 Y97.60154
G01 X-153.56285 Y97.63261
G01 X-153.58173 Y97.65976
G01 X-153.59547 Y97.68031
G01 X-153.62717 Y97.72946
G01 X-153.68206 Y97.83103
G01 X-153.70819 Y97.88953
G01 X-153.71632 Y97.90723
G01 X-153.74444 Y97.96667
G01 X-153.74817 Y97.97467
G01 X-153.87682 Y98.02069
G01 X-153.95287 Y98.04383
G01 X-154.14891 Y98.09296
G01 X-154.21185 Y98.10550
G01 X-154.40789 Y98.13456
G01 X-154.46334 Y98.14005
G01 X-154.65937 Y98.14967
G01 X-154.68594 Y98.15033
G01 X-156.20992 Y98.15033
G01 X-156.23648 Y98.14967
G01 X-156.43250 Y98.14005
G01 X-156.48794 Y98.13456
G01 X-156.68398 Y98.10550
G01 X-156.74692 Y98.09296
G01 X-156.94296 Y98.04383
G01 X-156.97727 Y98.03441
G01 X-157.00963 Y98.00926
G01 X-157.16117 Y97.88490
G01 X-157.17237 Y97.87553
G01 X-157.19005 Y97.86047
G01 X-157.23171 Y97.82732
G01 X-157.47044 Y97.65023
G01 X-157.54438 Y97.60088
G01 X-157.67456 Y97.52285
G01 X-157.81507 Y97.48023
G01 X-157.90928 Y97.46149
G01 X-158.20191 Y97.43268
G01 X-158.24994 Y97.43032
G01 X-159.24994 Y97.43032
G01 X-159.29797 Y97.43268
G01 X-159.59060 Y97.46149
G01 X-159.68481 Y97.48023
G01 X-159.96619 Y97.56560
G01 X-160.05494 Y97.60235
G01 X-160.31428 Y97.74096
G01 X-160.39413 Y97.79433
G01 X-160.62144 Y97.98087
G01 X-160.68938 Y98.04881
G01 X-160.87592 Y98.27612
G01 X-160.92929 Y98.35597
G01 X-161.04920 Y98.58033
G01 X-161.07633 Y98.58033
G01 X-161.01189 Y98.44652
G01 X-160.89177 Y98.25539
G01 X-160.75100 Y98.07886
G01 X-160.59139 Y97.91922
G01 X-160.41486 Y97.77845
G01 X-160.22373 Y97.65834
G01 X-160.02035 Y97.56042
G01 X-159.80724 Y97.48585
G01 X-159.58715 Y97.43560
G01 X-159.36279 Y97.41033
G01 X-158.93452 Y97.41033
G01 X-158.87051 Y97.40614
G01 X-158.83196 Y97.40106
G01 X-158.73846 Y97.37924
G01 X-158.65101 Y97.33962
G01 X-158.58421 Y97.30106
G01 X-158.51420 Y97.25206
G01 X-158.45378 Y97.19164
G01 X-158.40478 Y97.12163
G01 X-158.36622 Y97.05483
G01 X-158.33013 Y96.97744
G01 X-158.31144 Y96.90766
G01 X-158.31893 Y96.87848
G01 X-158.33661 Y96.80988
G01 X-158.36853 Y96.73276
G01 X-158.47318 Y96.54958
G01 X-158.52053 Y96.48785
G01 X-158.58149 Y96.41831
G01 X-158.66300 Y96.33680
G01 X-158.69655 Y96.30535
G01 X-158.72586 Y96.27965
G01 X-158.81773 Y96.21120
G01 X-158.84666 Y96.20680
G01 X-158.92378 Y96.19664
G01 X-159.01603 Y96.19057
G01 X-159.24994 Y96.19057
G01 X-159.28433 Y96.18973
G01 X-159.37087 Y96.18547
G01 X-159.57704 Y96.16177
G01 X-159.61125 Y96.15697
G01 X-159.64473 Y96.14831
G01 X-159.84430 Y96.09131
G01 X-159.92588 Y96.06212
G01 X-159.98944 Y96.03578
G01 X-160.06777 Y95.99875
G01 X-160.24918 Y95.89794
G01 X-160.27897 Y95.88041
G01 X-160.30655 Y95.85958
G01 X-160.46911 Y95.73058
G01 X-160.53333 Y95.67236
G01 X-160.58199 Y95.62369
G01 X-160.64016 Y95.55951
G01 X-160.76919 Y95.39695
G01 X-160.78999 Y95.36936
G01 X-160.80749 Y95.33962
G01 X-160.90754 Y95.15964
G01 X-160.90828 Y95.15829
G01 X-160.94536 Y95.07988
G01 X-160.97173 Y95.01625
G01 X-161.00091 Y94.93472
G01 X-161.05789 Y94.73510
G01 X-161.06655 Y94.70167
G01 X-161.07135 Y94.66746
G01 X-161.09507 Y94.46124
G01 X-161.09934 Y94.37475
G01 X-161.09934 Y94.30589
G01 X-161.09507 Y94.21941
G01 X-161.07135 Y94.01318
G01 X-161.06655 Y93.97897
G01 X-161.05789 Y93.94554
G01 X-161.01031 Y93.77894
G01 X-161.00089 Y93.74592
G01 X-160.97173 Y93.66442
G01 X-160.94539 Y93.60079
G01 X-160.90833 Y93.52248
G01 X-160.80749 Y93.34105
G01 X-160.78999 Y93.31130
G01 X-160.76919 Y93.28369
G01 X-160.64016 Y93.12113
G01 X-160.58199 Y93.05695
G01 X-160.53330 Y93.00826
G01 X-160.46911 Y92.95009
G01 X-160.30655 Y92.82106
G01 X-160.27894 Y92.80026
G01 X-160.24920 Y92.78276
G01 X-160.06777 Y92.68192
G01 X-159.98946 Y92.64486
G01 X-159.92583 Y92.61852
G01 X-159.84430 Y92.58933
G01 X-159.64471 Y92.53236
G01 X-159.61128 Y92.52370
G01 X-159.57707 Y92.51890
G01 X-159.37084 Y92.49518
G01 X-159.28436 Y92.49091
G01 X-159.24994 Y92.49007
G01 X-159.01603 Y92.49007
G01 X-158.97008 Y92.48857
G01 X-158.93117 Y92.48601
G01 X-158.81773 Y92.46945
G01 X-158.79426 Y92.45215
G01 X-158.73254 Y92.40480
G01 X-158.66300 Y92.34384
G01 X-158.28200 Y91.96284
G01 X-158.25055 Y91.92929
G01 X-158.22485 Y91.89998
G01 X-158.14075 Y91.78220
G01 X-158.10082 Y91.71306
G01 X-158.01113 Y91.49203
G01 X-158.01273 Y91.48299
G01 X-158.03270 Y91.40849
G01 X-158.06191 Y91.32822
G01 X-158.10460 Y91.25426
G01 X-158.10994 Y91.24791
G01 X-158.18317 Y91.21250
G01 X-158.20623 Y91.20425
G01 X-158.24992 Y91.18741
G01 X-158.26208 Y91.18235
G01 X-158.46566 Y91.12680
G01 X-158.54278 Y91.11664
G01 X-158.63503 Y91.11057
G01 X-159.24994 Y91.11057
G01 X-159.28433 Y91.10973
G01 X-159.37087 Y91.10547
G01 X-159.57704 Y91.08177
G01 X-159.61125 Y91.07697
G01 X-159.64473 Y91.06831
G01 X-159.84430 Y91.01131
G01 X-159.92588 Y90.98212
G01 X-159.98944 Y90.95578
G01 X-160.06774 Y90.91875
G01 X-160.24918 Y90.81794
G01 X-160.27897 Y90.80041
G01 X-160.30655 Y90.77958
G01 X-160.46911 Y90.65058
G01 X-160.53333 Y90.59236
G01 X-160.58199 Y90.54369
G01 X-160.64016 Y90.47951
G01 X-160.76919 Y90.31695
G01 X-160.78997 Y90.28939
G01 X-160.80749 Y90.25960
G01 X-160.81748 Y90.24166
G01 X-160.90836 Y90.07816
G01 X-160.94536 Y89.99988
G01 X-160.97173 Y89.93625
G01 X-161.00091 Y89.85469
G01 X-161.00894 Y89.82655
G01 X-161.05789 Y89.65510
G01 X-161.06655 Y89.62167
G01 X-161.07135 Y89.58746
G01 X-161.09507 Y89.38124
G01 X-161.09934 Y89.29475
G01 X-161.09934 Y89.22589
G01 X-161.09507 Y89.13941
G01 X-161.07135 Y88.93318
G01 X-161.06655 Y88.89897
G01 X-161.05789 Y88.86554
G01 X-161.00089 Y88.66592
G01 X-160.97173 Y88.58439
G01 X-160.94539 Y88.52079
G01 X-160.94338 Y88.51652
G01 X-160.90836 Y88.44251
G01 X-160.80749 Y88.26105
G01 X-160.78999 Y88.23130
G01 X-160.76919 Y88.20369
G01 X-160.64016 Y88.04113
G01 X-160.58199 Y87.97695
G01 X-160.53330 Y87.92826
G01 X-160.46911 Y87.87009
G01 X-160.30655 Y87.74106
G01 X-160.27894 Y87.72026
G01 X-160.24920 Y87.70276
G01 X-160.06777 Y87.60192
G01 X-159.98946 Y87.56486
G01 X-159.92583 Y87.53852
G01 X-159.84430 Y87.50933
G01 X-159.64471 Y87.45236
G01 X-159.61128 Y87.44370
G01 X-159.57707 Y87.43890
G01 X-159.37084 Y87.41518
G01 X-159.28436 Y87.41091
G01 X-159.24994 Y87.41007
G01 X-158.24994 Y87.41007
G01 X-158.21550 Y87.41091
G01 X-158.12901 Y87.41518
G01 X-157.92279 Y87.43890
G01 X-157.88858 Y87.44370
G01 X-157.85515 Y87.45236
G01 X-157.72561 Y87.48935
G01 X-157.65553 Y87.50933
G01 X-157.57400 Y87.53852
G01 X-157.51037 Y87.56488
G01 X-157.43206 Y87.60192
G01 X-157.25063 Y87.70276
G01 X-157.22091 Y87.72023
G01 X-157.21835 Y87.72209
G01 X-157.19330 Y87.74106
G01 X-157.10681 Y87.80969
G01 X-157.08832 Y87.82389
G01 X-157.07265 Y87.83550
G01 X-156.98355 Y87.89196
G01 X-156.97011 Y87.89384
G01 X-156.89300 Y87.90400
G01 X-156.80077 Y87.91007
G01 X-154.36603 Y87.91007
G01 X-154.32008 Y87.90857
G01 X-154.28117 Y87.90601
G01 X-154.16776 Y87.88945
G01 X-154.14426 Y87.87215
G01 X-154.08254 Y87.82480
G01 X-154.01299 Y87.76384
G01 X-149.03541 Y82.78626
G01 X-149.00396 Y82.75270
G01 X-148.97826 Y82.72339
G01 X-148.90980 Y82.63152
G01 X-148.90541 Y82.60259
G01 X-148.89525 Y82.52547
G01 X-148.88918 Y82.43325
G01 X-148.88918 Y80.99931
G01 X-148.88801 Y80.95867
G01 X-148.88595 Y80.94117
G01 X-148.85949 Y80.85504
G01 X-148.81565 Y80.78255
G01 X-148.75570 Y80.72261
G01 X-148.68321 Y80.67877
G01 X-148.59708 Y80.65230
G01 X-148.57958 Y80.65024
G01 X-148.53894 Y80.64907
G01 X-145.33894 Y80.64907
G01 X-145.29828 Y80.65024
G01 X-145.28078 Y80.65230
G01 X-145.19465 Y80.67877
G01 X-145.12213 Y80.72261
G01 X-145.06219 Y80.78258
G01 X-145.04855 Y80.80310
G01 X-145.01837 Y80.85504
G01 X-144.99188 Y80.94120
G01 X-144.98987 Y80.95862
G01 X-144.98868 Y80.99931
G01 X-144.98868 Y84.19933
G01 X-144.98985 Y84.23997
G01 X-144.99190 Y84.25747
G01 X-145.01837 Y84.34361
G01 X-145.06221 Y84.41612
G01 X-145.12213 Y84.47604
G01 X-145.19465 Y84.51988
G01 X-145.28080 Y84.54637
G01 X-145.29825 Y84.54838
G01 X-145.33894 Y84.54957
G01 X-146.77285 Y84.54957
G01 X-146.81877 Y84.55107
G01 X-146.85769 Y84.55364
G01 X-146.97107 Y84.57017
G01 X-146.99459 Y84.58750
G01 X-147.05631 Y84.63487
G01 X-147.12586 Y84.69580
G01 X-152.05585 Y89.62582
G01 X-152.08709 Y89.65914
G01 X-152.11279 Y89.68843
G01 X-152.19712 Y89.80646
G01 X-152.23705 Y89.87565
G01 X-152.32674 Y90.09665
G01 X-152.32514 Y90.10567
G01 X-152.30517 Y90.18017
G01 X-152.27596 Y90.26043
G01 X-152.23713 Y90.32772
G01 X-152.21798 Y90.33831
G01 X-152.15290 Y90.37435
G01 X-152.07576 Y90.40628
G01 X-151.87218 Y90.46186
G01 X-151.79501 Y90.47202
G01 X-151.70284 Y90.47806
G01 X-149.37792 Y90.47806
G01 X-149.29731 Y90.47344
G01 X-149.22964 Y90.46564
G01 X-149.12093 Y90.44489
G01 X-149.06332 Y90.39607
G01 X-149.00701 Y90.34331
G01 X-148.91976 Y90.24606
G01 X-148.90589 Y90.18319
G01 X-148.90521 Y90.17999
G01 X-148.88882 Y90.10410
G01 X-148.87511 Y90.01177
G01 X-148.87127 Y89.96493
G01 X-148.85761 Y89.87278
G01 X-148.84417 Y89.80527
G01 X-148.82151 Y89.71489
G01 X-148.75402 Y89.50483
G01 X-148.74265 Y89.47220
G01 X-148.72763 Y89.44108
G01 X-148.62682 Y89.24482
G01 X-148.57892 Y89.16491
G01 X-148.54066 Y89.10766
G01 X-148.48519 Y89.03285
G01 X-148.34244 Y88.86460
G01 X-148.31943 Y88.83882
G01 X-148.29365 Y88.81581
G01 X-148.12540 Y88.67309
G01 X-148.05055 Y88.61756
G01 X-147.99335 Y88.57934
G01 X-147.91341 Y88.53143
G01 X-147.71717 Y88.43064
G01 X-147.68606 Y88.41561
G01 X-147.65342 Y88.40423
G01 X-147.44336 Y88.33674
G01 X-147.35299 Y88.31408
G01 X-147.28547 Y88.30065
G01 X-147.19332 Y88.28698
G01 X-146.97343 Y88.26897
G01 X-146.93892 Y88.26699
G01 X-146.90442 Y88.26897
G01 X-146.68453 Y88.28698
G01 X-146.59238 Y88.30065
G01 X-146.52487 Y88.31408
G01 X-146.43450 Y88.33674
G01 X-146.22444 Y88.40423
G01 X-146.19180 Y88.41561
G01 X-146.16068 Y88.43064
G01 X-145.96439 Y88.53146
G01 X-145.88451 Y88.57934
G01 X-145.82726 Y88.61759
G01 X-145.75243 Y88.67309
G01 X-145.58421 Y88.81581
G01 X-145.55843 Y88.83880
G01 X-145.53541 Y88.86460
G01 X-145.39266 Y89.03285
G01 X-145.33719 Y89.10766
G01 X-145.29894 Y89.16491
G01 X-145.25103 Y89.24484
G01 X-145.16772 Y89.40699
G01 X-145.15022 Y89.44108
G01 X-145.13521 Y89.47220
G01 X-145.12383 Y89.50483
G01 X-145.05634 Y89.71484
G01 X-145.04517 Y89.75952
G01 X-145.03369 Y89.80527
G01 X-145.02025 Y89.87278
G01 X-145.00659 Y89.96493
G01 X-144.98858 Y90.18482
G01 X-144.98660 Y90.21931
G01 X-144.98858 Y90.25383
G01 X-145.00659 Y90.47372
G01 X-145.02025 Y90.56587
G01 X-145.03369 Y90.63338
G01 X-145.05632 Y90.72376
G01 X-145.11570 Y90.90857
G01 X-145.12383 Y90.93381
G01 X-145.13521 Y90.96645
G01 X-145.15022 Y90.99757
G01 X-145.25103 Y91.19383
G01 X-145.29894 Y91.27374
G01 X-145.33719 Y91.33099
G01 X-145.39266 Y91.40580
G01 X-145.53541 Y91.57405
G01 X-145.55843 Y91.59983
G01 X-145.58421 Y91.62284
G01 X-145.75246 Y91.76559
G01 X-145.82726 Y91.82106
G01 X-145.88451 Y91.85931
G01 X-145.96442 Y91.90722
G01 X-146.16068 Y92.00803
G01 X-146.19180 Y92.02304
G01 X-146.22444 Y92.03442
G01 X-146.43450 Y92.10191
G01 X-146.52487 Y92.12457
G01 X-146.59238 Y92.13800
G01 X-146.68451 Y92.15167
G01 X-146.79965 Y92.16109
G01 X-146.83439 Y92.16480
G01 X-146.86340 Y92.16863
G01 X-146.90389 Y92.17516
G01 X-146.97018 Y92.18781
G01 X-146.98857 Y92.20148
G01 X-147.05029 Y92.24885
G01 X-147.11984 Y92.30978
G01 X-147.51433 Y92.70430
G01 X-147.59314 Y92.78309
G01 X-147.61806 Y92.80681
G01 X-147.65801 Y92.84303
G01 X-147.76939 Y92.93142
G01 X-147.79698 Y92.95222
G01 X-147.82670 Y92.96973
G01 X-147.95100 Y93.03881
G01 X-147.99970 Y93.06185
G01 X-148.00038 Y93.06216
G01 X-148.06332 Y93.08819
G01 X-148.11407 Y93.10635
G01 X-148.25083 Y93.14539
G01 X-148.28423 Y93.15405
G01 X-148.31836 Y93.15883
G01 X-148.45964 Y93.17508
G01 X-148.51349 Y93.17773
G01 X-148.54790 Y93.17856
G01 X-150.64592 Y93.17856
G01 X-150.69184 Y93.18009
G01 X-150.73075 Y93.18263
G01 X-150.87358 Y93.20645
G01 X-150.95069 Y93.22710
G01 X-151.16649 Y93.31831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-137.88790 Y103.43000 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-137.88790 Y103.43000
G01 X-137.88996 Y103.43707
G01 X-137.91800 Y103.50892
G01 X-137.95588 Y103.58550
G01 X-138.00650 Y103.65434
G01 X-138.04597 Y103.69201
G01 X-138.06827 Y103.71332
G01 X-138.12847 Y103.76150
G01 X-138.22552 Y103.82208
G01 X-138.33398 Y103.85850
G01 X-138.39385 Y103.87107
G01 X-138.49456 Y103.88154
G01 X-162.60749 Y103.88154
G01 X-162.73431 Y103.86483
G01 X-162.80881 Y103.84486
G01 X-162.88907 Y103.81565
G01 X-162.96304 Y103.77295
G01 X-163.02847 Y103.71807
G01 X-163.05450 Y103.69201
G01 X-163.08300 Y103.66353
G01 X-163.13789 Y103.59808
G01 X-163.18062 Y103.52411
G01 X-163.20983 Y103.44385
G01 X-163.22979 Y103.36932
G01 X-163.24648 Y103.24250
G01 X-163.24648 Y1.47451
G01 X-163.22976 Y1.34768
G01 X-163.20980 Y1.27319
G01 X-163.18059 Y1.19292
G01 X-163.13789 Y1.11896
G01 X-163.08300 Y1.05353
G01 X-163.02847 Y0.99899
G01 X-162.96304 Y0.94410
G01 X-162.88907 Y0.90141
G01 X-162.80881 Y0.87220
G01 X-162.73431 Y0.85223
G01 X-162.60749 Y0.83552
G01 X-101.97495 Y0.83552
G01 X-101.84810 Y0.85223
G01 X-101.77360 Y0.87220
G01 X-101.69339 Y0.90138
G01 X-101.61945 Y0.94405
G01 X-101.55404 Y0.99892
G01 X-101.52793 Y1.02500
G01 X-101.49948 Y1.05345
G01 X-101.44452 Y1.11893
G01 X-101.40177 Y1.19300
G01 X-101.38800 Y1.23077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.09393 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.09393 Y3.42192
G01 X-98.11077 Y3.43023
G01 X-98.29713 Y3.55477
G01 X-98.46566 Y3.70254
G01 X-98.61346 Y3.87110
G01 X-98.73800 Y4.05748
G01 X-98.74630 Y4.07432
G01 X-98.71468 Y4.07432
G01 X-98.68384 Y4.01664
G01 X-98.63048 Y3.93678
G01 X-98.48125 Y3.75494
G01 X-98.41331 Y3.68700
G01 X-98.23147 Y3.53777
G01 X-98.15161 Y3.48441
G01 X-98.09393 Y3.45357
G01 X-98.09393 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.76152 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.76152 Y5.75433
G01 X-95.76983 Y5.77117
G01 X-95.89436 Y5.95753
G01 X-96.04214 Y6.12606
G01 X-96.21070 Y6.27386
G01 X-96.39708 Y6.39840
G01 X-96.41392 Y6.40670
G01 X-96.41392 Y6.37503
G01 X-96.35626 Y6.34422
G01 X-96.27641 Y6.29085
G01 X-96.09457 Y6.14163
G01 X-96.02662 Y6.07368
G01 X-95.87740 Y5.89184
G01 X-95.82403 Y5.81199
G01 X-95.79322 Y5.75433
G01 X-95.76152 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.90293 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.90293 Y6.37505
G01 X-93.90293 Y6.40670
G01 X-93.91977 Y6.39840
G01 X-94.10615 Y6.27389
G01 X-94.27466 Y6.12611
G01 X-94.42246 Y5.95755
G01 X-94.54700 Y5.77117
G01 X-94.55530 Y5.75433
G01 X-94.52365 Y5.75433
G01 X-94.49284 Y5.81199
G01 X-94.43948 Y5.89184
G01 X-94.29025 Y6.07368
G01 X-94.22231 Y6.14163
G01 X-94.04047 Y6.29085
G01 X-93.96061 Y6.34422
G01 X-93.90293 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.57052 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.57052 Y4.07432
G01 X-91.57883 Y4.05748
G01 X-91.70336 Y3.87112
G01 X-91.85114 Y3.70259
G01 X-92.01972 Y3.55479
G01 X-92.20608 Y3.43023
G01 X-92.22292 Y3.42192
G01 X-92.22292 Y3.45360
G01 X-92.16526 Y3.48441
G01 X-92.08541 Y3.53777
G01 X-91.90357 Y3.68700
G01 X-91.83562 Y3.75494
G01 X-91.68640 Y3.93678
G01 X-91.63303 Y4.01664
G01 X-91.60220 Y4.07432
G01 X-91.57052 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.71193 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.71193 Y3.42192
G01 X-89.72877 Y3.43023
G01 X-89.91513 Y3.55477
G01 X-90.08366 Y3.70254
G01 X-90.23146 Y3.87110
G01 X-90.35600 Y4.05748
G01 X-90.36430 Y4.07432
G01 X-90.33268 Y4.07432
G01 X-90.30184 Y4.01664
G01 X-90.24848 Y3.93678
G01 X-90.09925 Y3.75494
G01 X-90.03131 Y3.68700
G01 X-89.84947 Y3.53777
G01 X-89.76961 Y3.48441
G01 X-89.71193 Y3.45357
G01 X-89.71193 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.37952 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.37952 Y5.75433
G01 X-87.41122 Y5.75433
G01 X-87.44203 Y5.81199
G01 X-87.49540 Y5.89184
G01 X-87.64462 Y6.07368
G01 X-87.71257 Y6.14163
G01 X-87.89441 Y6.29085
G01 X-87.97426 Y6.34422
G01 X-88.03192 Y6.37503
G01 X-88.03192 Y6.40670
G01 X-88.01508 Y6.39840
G01 X-87.82870 Y6.27386
G01 X-87.66014 Y6.12606
G01 X-87.51236 Y5.95753
G01 X-87.38783 Y5.77117
G01 X-87.37952 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.37952 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.37952 Y4.07432
G01 X-87.41120 Y4.07432
G01 X-87.44203 Y4.01664
G01 X-87.49540 Y3.93678
G01 X-87.64462 Y3.75494
G01 X-87.71257 Y3.68700
G01 X-87.89441 Y3.53777
G01 X-87.97426 Y3.48441
G01 X-88.03192 Y3.45360
G01 X-88.03192 Y3.42192
G01 X-88.01508 Y3.43023
G01 X-87.82872 Y3.55479
G01 X-87.66014 Y3.70259
G01 X-87.51236 Y3.87112
G01 X-87.38783 Y4.05748
G01 X-87.37952 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.71193 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.71193 Y6.37505
G01 X-89.76961 Y6.34422
G01 X-89.84947 Y6.29085
G01 X-90.03131 Y6.14163
G01 X-90.09925 Y6.07368
G01 X-90.24848 Y5.89184
G01 X-90.30184 Y5.81199
G01 X-90.33265 Y5.75433
G01 X-90.36430 Y5.75433
G01 X-90.35600 Y5.77117
G01 X-90.23146 Y5.95755
G01 X-90.08366 Y6.12611
G01 X-89.91515 Y6.27389
G01 X-89.72877 Y6.39840
G01 X-89.71193 Y6.40670
G01 X-89.71193 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.57052 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.57052 Y5.75433
G01 X-91.60222 Y5.75433
G01 X-91.63303 Y5.81199
G01 X-91.68640 Y5.89184
G01 X-91.83562 Y6.07368
G01 X-91.90357 Y6.14163
G01 X-92.08541 Y6.29085
G01 X-92.16526 Y6.34422
G01 X-92.22292 Y6.37503
G01 X-92.22292 Y6.40670
G01 X-92.20608 Y6.39840
G01 X-92.01970 Y6.27386
G01 X-91.85114 Y6.12606
G01 X-91.70336 Y5.95753
G01 X-91.57883 Y5.77117
G01 X-91.57052 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.90293 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.90293 Y3.42192
G01 X-93.90293 Y3.45357
G01 X-93.96061 Y3.48441
G01 X-94.04047 Y3.53777
G01 X-94.22231 Y3.68700
G01 X-94.29025 Y3.75494
G01 X-94.43948 Y3.93678
G01 X-94.49284 Y4.01664
G01 X-94.52368 Y4.07432
G01 X-94.55530 Y4.07432
G01 X-94.54700 Y4.05748
G01 X-94.42246 Y3.87110
G01 X-94.27466 Y3.70254
G01 X-94.10613 Y3.55477
G01 X-93.91977 Y3.43023
G01 X-93.90293 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.76152 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.76152 Y4.07432
G01 X-95.79320 Y4.07432
G01 X-95.82403 Y4.01664
G01 X-95.87740 Y3.93678
G01 X-96.02662 Y3.75494
G01 X-96.09457 Y3.68700
G01 X-96.27641 Y3.53777
G01 X-96.35626 Y3.48441
G01 X-96.41392 Y3.45360
G01 X-96.41392 Y3.42192
G01 X-96.39708 Y3.43023
G01 X-96.21072 Y3.55479
G01 X-96.04214 Y3.70259
G01 X-95.89436 Y3.87112
G01 X-95.76983 Y4.05748
G01 X-95.76152 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.09393 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.09393 Y6.37505
G01 X-98.15161 Y6.34422
G01 X-98.23147 Y6.29085
G01 X-98.41331 Y6.14163
G01 X-98.48125 Y6.07368
G01 X-98.63048 Y5.89184
G01 X-98.68384 Y5.81199
G01 X-98.71465 Y5.75433
G01 X-98.74630 Y5.75433
G01 X-98.73800 Y5.77117
G01 X-98.61346 Y5.95755
G01 X-98.46566 Y6.12611
G01 X-98.29715 Y6.27389
G01 X-98.11077 Y6.39840
G01 X-98.09393 Y6.40670
G01 X-98.09393 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-105.19714 Y6.16408 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-105.19714 Y6.16408
G01 X-105.28149 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-110.09944 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-110.09944 Y6.23332
G01 X-110.11547 Y6.26004
G01 X-110.15507 Y6.33388
G01 X-110.22459 Y6.48092
G01 X-110.24702 Y6.53495
G01 X-110.29962 Y6.68196
G01 X-110.31191 Y6.72235
G01 X-110.34874 Y6.86939
G01 X-110.35502 Y6.90076
G01 X-110.37681 Y7.04780
G01 X-110.37940 Y7.07401
G01 X-110.38661 Y7.22105
G01 X-110.38692 Y7.23332
G01 X-110.38692 Y9.45818
G01 X-110.38722 Y9.47048
G01 X-110.39444 Y9.61752
G01 X-110.39703 Y9.64376
G01 X-110.41885 Y9.79080
G01 X-110.42509 Y9.82211
G01 X-110.46192 Y9.96915
G01 X-110.47422 Y10.00957
G01 X-110.52682 Y10.15658
G01 X-110.53703 Y10.18307
G01 X-110.75189 Y10.70179
G01 X-110.75192 Y12.34527
G01 X-110.81892 Y12.33867
G01 X-110.91496 Y12.33867
G01 X-111.08080 Y12.35500
G01 X-111.17500 Y12.37375
G01 X-111.33447 Y12.42211
G01 X-111.35847 Y12.43207
G01 X-111.42321 Y12.45886
G01 X-111.57015 Y12.53742
G01 X-111.65004 Y12.59079
G01 X-111.77188 Y12.69079
G01 X-111.77615 Y12.69978
G01 X-111.81409 Y12.79120
G01 X-111.87373 Y12.95782
G01 X-111.89619 Y13.03168
G01 X-111.93794 Y13.19833
G01 X-111.95036 Y13.26061
G01 X-111.95433 Y13.28733
G01 X-111.95948 Y13.31708
G01 X-111.98102 Y13.42541
G01 X-111.98712 Y13.46211
G01 X-111.98979 Y13.48200
G01 X-111.99588 Y13.51875
G01 X-112.02128 Y13.64634
G01 X-112.02448 Y13.66374
G01 X-112.02662 Y13.67634
G01 X-112.03685 Y13.72513
G01 X-112.07366 Y13.87214
G01 X-112.08943 Y13.92635
G01 X-112.09540 Y13.94436
G01 X-112.10170 Y13.96424
G01 X-112.11691 Y14.01443
G01 X-112.11691 Y14.40394
G01 X-112.08437 Y14.48258
G01 X-112.00584 Y14.62952
G01 X-111.95247 Y14.70940
G01 X-111.84676 Y14.83821
G01 X-111.77884 Y14.90613
G01 X-111.65004 Y15.01184
G01 X-111.57015 Y15.06521
G01 X-111.42321 Y15.14374
G01 X-111.33447 Y15.18052
G01 X-111.17500 Y15.22889
G01 X-111.08080 Y15.24763
G01 X-110.91496 Y15.26396
G01 X-110.81890 Y15.26396
G01 X-110.65309 Y15.24763
G01 X-110.55888 Y15.22889
G01 X-110.39942 Y15.18052
G01 X-110.31067 Y15.14374
G01 X-110.16373 Y15.06521
G01 X-110.12797 Y15.04131
G01 X-104.29244 Y15.04131
G01 X-104.28597 Y15.04194
G01 X-104.18990 Y15.04194
G01 X-104.05074 Y15.02825
G01 X-104.03384 Y15.02657
G01 X-103.93964 Y15.00785
G01 X-103.78955 Y14.96231
G01 X-103.70080 Y14.92556
G01 X-103.66989 Y14.90902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-103.90154 Y12.51233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-103.90154 Y12.51233
G01 X-103.93964 Y12.50077
G01 X-104.03384 Y12.48205
G01 X-104.18990 Y12.46666
G01 X-104.28597 Y12.46666
G01 X-104.44205 Y12.48205
G01 X-104.53626 Y12.50077
G01 X-104.68632 Y12.54631
G01 X-104.72257 Y12.56133
G01 X-108.27194 Y12.56133
G01 X-108.27194 Y10.70182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-105.30326 Y9.74833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-105.30326 Y9.74833
G01 X-105.28441 Y9.73568
G01 X-105.17075 Y9.64241
G01 X-105.10283 Y9.57449
G01 X-105.00956 Y9.46085
G01 X-104.95620 Y9.38097
G01 X-104.88688 Y9.25130
G01 X-104.85012 Y9.16255
G01 X-104.80745 Y9.02186
G01 X-104.78871 Y8.92765
G01 X-104.77842 Y8.82334
G01 X-104.75289 Y8.82334
G01 X-104.77349 Y8.97967
G01 X-104.81622 Y9.13918
G01 X-104.81830 Y9.14419
G01 X-104.84619 Y9.23611
G01 X-104.85754 Y9.29313
G01 X-104.86554 Y9.39042
G01 X-104.86674 Y9.40482
G01 X-104.85028 Y9.51566
G01 X-104.83031 Y9.59016
G01 X-104.80110 Y9.67043
G01 X-104.76498 Y9.73299
G01 X-104.67804 Y9.78434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.86103 Y11.04558 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.86103 Y11.04558
G01 X-101.55310 Y11.35351
G01 X-101.52082 Y11.38914
G01 X-101.42755 Y11.50281
G01 X-101.42692 Y11.50372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.42694 Y10.71871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.42694 Y10.71871
G01 X-101.42692 Y10.71871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.39926 Y10.61734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.39926 Y10.61734
G01 X-101.44233 Y10.77507
G01 X-101.44452 Y10.77888
G01 X-101.49948 Y10.84436
G01 X-101.55404 Y10.89890
G01 X-101.61945 Y10.95376
G01 X-101.69339 Y10.99643
G01 X-101.77360 Y11.02562
G01 X-101.84810 Y11.04558
G01 X-101.85712 Y11.04718
G01 X-101.86103 Y11.04558
G01 X-101.86105 Y11.04558
G01 X-102.07815 Y10.95747
G01 X-102.14731 Y10.91754
G01 X-102.26507 Y10.83344
G01 X-102.29438 Y10.80774
G01 X-102.32796 Y10.77629
G01 X-102.89392 Y10.21033
G01 X-102.91886 Y10.18658
G01 X-102.95737 Y10.15170
G01 X-103.03270 Y10.09349
G01 X-103.08924 Y10.05409
G01 X-103.09658 Y10.04949
G01 X-103.21927 Y9.98546
G01 X-103.25023 Y9.97027
G01 X-103.28284 Y9.95912
G01 X-103.41487 Y9.91764
G01 X-103.42333 Y9.91571
G01 X-103.49125 Y9.90357
G01 X-103.58559 Y9.89148
G01 X-103.63755 Y9.88892
G01 X-103.67195 Y9.88808
G01 X-104.22800 Y9.88808
G01 X-104.32023 Y9.88201
G01 X-104.39734 Y9.87185
G01 X-104.60093 Y9.81630
G01 X-104.67804 Y9.78434
G01 X-104.73903 Y9.74833
G01 X-105.30326 Y9.74833
G01 X-105.37443 Y9.76997
G01 X-105.52147 Y9.80680
G01 X-105.60448 Y9.82336
G01 X-105.75149 Y9.84515
G01 X-105.75871 Y9.84619
G01 X-105.83064 Y9.82410
G01 X-105.98378 Y9.76928
G01 X-106.03788 Y9.74696
G01 X-106.17903 Y9.68018
G01 X-106.21629 Y9.66032
G01 X-106.34629 Y9.58239
G01 X-106.37291 Y9.56463
G01 X-106.49229 Y9.47609
G01 X-106.51266 Y9.45938
G01 X-106.62175 Y9.36052
G01 X-106.63912 Y9.34315
G01 X-106.73798 Y9.23405
G01 X-106.75467 Y9.21371
G01 X-106.84321 Y9.09433
G01 X-106.85231 Y9.08145
G01 X-106.85500 Y9.06588
G01 X-106.87682 Y8.91884
G01 X-106.87938 Y8.89263
G01 X-106.88662 Y8.74561
G01 X-106.88693 Y8.73332
G01 X-106.88693 Y7.23332
G01 X-106.88662 Y7.22105
G01 X-106.87938 Y7.07404
G01 X-106.87682 Y7.04780
G01 X-106.85500 Y6.90078
G01 X-106.84875 Y6.86939
G01 X-106.81192 Y6.72235
G01 X-106.79963 Y6.68196
G01 X-106.74702 Y6.53495
G01 X-106.72457 Y6.48090
G01 X-106.65502 Y6.33386
G01 X-106.61545 Y6.26004
G01 X-106.59942 Y6.23332
G01 X-105.28149 Y6.23332
G01 X-105.17075 Y6.32420
G01 X-105.10283 Y6.39212
G01 X-105.07174 Y6.43002
G01 X-105.00956 Y6.50579
G01 X-104.95620 Y6.58565
G01 X-104.88688 Y6.71531
G01 X-104.85012 Y6.80406
G01 X-104.80745 Y6.94475
G01 X-104.78871 Y7.03896
G01 X-104.77842 Y7.14333
G01 X-104.75289 Y7.14333
G01 X-104.77349 Y6.98699
G01 X-104.81622 Y6.82745
G01 X-104.87944 Y6.67483
G01 X-104.96201 Y6.53182
G01 X-105.08210 Y6.37533
G01 X-105.07936 Y6.37323
G01 X-105.12099 Y6.31874
G01 X-105.15955 Y6.25197
G01 X-105.19564 Y6.17455
G01 X-105.19780 Y6.16650
G01 X-105.18612 Y6.12370
G01 X-105.15589 Y6.03101
G01 X-105.14766 Y6.00696
G01 X-105.12008 Y5.92982
G01 X-105.10237 Y5.88471
G01 X-105.07382 Y5.81806
G01 X-105.06699 Y5.80259
G01 X-105.05401 Y5.77422
G01 X-105.03770 Y5.74087
G01 X-105.00905 Y5.68598
G01 X-104.99386 Y5.65502
G01 X-104.98271 Y5.62240
G01 X-104.94123 Y5.49037
G01 X-104.93930 Y5.48191
G01 X-104.92716 Y5.41402
G01 X-104.91507 Y5.31966
G01 X-104.91251 Y5.26774
G01 X-104.91167 Y5.23335
G01 X-104.91167 Y3.73333
G01 X-104.91251 Y3.69891
G01 X-104.91507 Y3.64699
G01 X-104.92716 Y3.55263
G01 X-104.93930 Y3.48474
G01 X-104.94123 Y3.47628
G01 X-104.98271 Y3.34425
G01 X-104.99386 Y3.31164
G01 X-105.00905 Y3.28067
G01 X-105.07309 Y3.15799
G01 X-105.07768 Y3.15065
G01 X-105.11713 Y3.09406
G01 X-105.17530 Y3.01877
G01 X-105.21022 Y2.98024
G01 X-105.25886 Y2.93160
G01 X-105.29737 Y2.89670
G01 X-105.37265 Y2.83851
G01 X-105.42924 Y2.79909
G01 X-105.43659 Y2.79449
G01 X-105.55927 Y2.73046
G01 X-105.59023 Y2.71527
G01 X-105.62284 Y2.70412
G01 X-105.75487 Y2.66264
G01 X-105.76333 Y2.66071
G01 X-105.83125 Y2.64857
G01 X-105.92559 Y2.63648
G01 X-105.97755 Y2.63391
G01 X-106.04634 Y2.63391
G01 X-106.09826 Y2.63648
G01 X-106.19262 Y2.64857
G01 X-106.26051 Y2.66071
G01 X-106.26897 Y2.66264
G01 X-106.40100 Y2.70412
G01 X-106.43361 Y2.71527
G01 X-106.46457 Y2.73046
G01 X-106.58726 Y2.79449
G01 X-106.59460 Y2.79909
G01 X-106.65114 Y2.83849
G01 X-106.72647 Y2.89670
G01 X-106.76498 Y2.93158
G01 X-106.81367 Y2.98027
G01 X-106.84855 Y3.01877
G01 X-106.90676 Y3.09411
G01 X-106.94613 Y3.15060
G01 X-106.96442 Y3.17981
G01 X-107.02012 Y3.25690
G01 X-107.03209 Y3.27138
G01 X-107.06871 Y3.31943
G01 X-107.07829 Y3.33305
G01 X-107.08342 Y3.34029
G01 X-107.23625 Y3.37270
G01 X-107.29823 Y3.37923
G01 X-107.37184 Y3.38309
G01 X-108.15205 Y3.38309
G01 X-108.24428 Y3.37702
G01 X-108.32139 Y3.36686
G01 X-108.44108 Y3.34115
G01 X-108.44682 Y3.33343
G01 X-108.47742 Y3.29160
G01 X-108.49243 Y3.27173
G01 X-108.51593 Y3.24176
G01 X-108.55944 Y3.17981
G01 X-108.57773 Y3.15060
G01 X-108.61710 Y3.09411
G01 X-108.67531 Y3.01877
G01 X-108.71019 Y2.98027
G01 X-108.75885 Y2.93160
G01 X-108.79736 Y2.89668
G01 X-108.87267 Y2.83854
G01 X-108.92924 Y2.79909
G01 X-108.93660 Y2.79449
G01 X-109.05926 Y2.73046
G01 X-109.09025 Y2.71524
G01 X-109.12284 Y2.70412
G01 X-109.25487 Y2.66264
G01 X-109.26332 Y2.66071
G01 X-109.33124 Y2.64857
G01 X-109.42560 Y2.63648
G01 X-109.47755 Y2.63391
G01 X-109.54633 Y2.63391
G01 X-109.59825 Y2.63648
G01 X-109.69261 Y2.64857
G01 X-109.76050 Y2.66071
G01 X-109.76896 Y2.66264
G01 X-109.90099 Y2.70412
G01 X-109.93360 Y2.71527
G01 X-109.96459 Y2.73046
G01 X-110.08725 Y2.79449
G01 X-110.09462 Y2.79909
G01 X-110.15118 Y2.83854
G01 X-110.22649 Y2.89668
G01 X-110.26500 Y2.93160
G01 X-110.31366 Y2.98027
G01 X-110.34856 Y3.01877
G01 X-110.40676 Y3.09409
G01 X-110.44613 Y3.15060
G01 X-110.45077 Y3.15799
G01 X-110.51478 Y3.28065
G01 X-110.52997 Y3.31161
G01 X-110.54115 Y3.34433
G01 X-110.58260 Y3.47628
G01 X-110.58456 Y3.48479
G01 X-110.59667 Y3.55263
G01 X-110.60876 Y3.64699
G01 X-110.61133 Y3.69891
G01 X-110.61217 Y3.73333
G01 X-110.61217 Y4.12180
G01 X-110.61824 Y4.21402
G01 X-110.62840 Y4.29114
G01 X-110.68392 Y4.49462
G01 X-110.71585 Y4.57176
G01 X-110.76253 Y4.65606
G01 X-110.82989 Y4.69495
G01 X-110.91023 Y4.72418
G01 X-110.98473 Y4.74412
G01 X-110.99365 Y4.74570
G01 X-110.99748 Y4.74412
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-110.75194 Y4.63693 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-110.75194 Y4.63693
G01 X-110.75192 Y4.98971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-113.59943 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-113.59943 Y6.23332
G01 X-113.61546 Y6.26004
G01 X-113.65506 Y6.33388
G01 X-113.72458 Y6.48092
G01 X-113.74701 Y6.53495
G01 X-113.79961 Y6.68196
G01 X-113.81191 Y6.72235
G01 X-113.84874 Y6.86939
G01 X-113.85501 Y6.90076
G01 X-113.87680 Y7.04780
G01 X-113.87939 Y7.07401
G01 X-113.88663 Y7.22103
G01 X-113.88694 Y7.23332
G01 X-113.88694 Y8.73332
G01 X-113.88663 Y8.74564
G01 X-113.87939 Y8.89265
G01 X-113.87680 Y8.91884
G01 X-113.85501 Y9.06588
G01 X-113.84874 Y9.09730
G01 X-113.81191 Y9.24429
G01 X-113.79964 Y9.28465
G01 X-113.74703 Y9.43169
G01 X-113.72455 Y9.48579
G01 X-113.65503 Y9.63281
G01 X-113.61549 Y9.70652
G01 X-113.52737 Y9.85356
G01 X-113.52235 Y9.86151
G01 X-113.52232 Y9.86151
G01 X-113.44874 Y9.89199
G01 X-113.44952 Y9.89217
G01 X-113.52189 Y9.96456
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-113.52737 Y9.85356 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-113.52737 Y9.85356
G01 X-113.52232 Y9.86151
G01 X-113.52194 Y9.86214
G01 X-113.52189 Y9.96456
G01 X-113.73680 Y10.48335
G01 X-113.74701 Y10.50984
G01 X-113.79961 Y10.65686
G01 X-113.81191 Y10.69727
G01 X-113.84874 Y10.84431
G01 X-113.85498 Y10.87563
G01 X-113.87680 Y11.02267
G01 X-113.87939 Y11.04891
G01 X-113.88661 Y11.19592
G01 X-113.88691 Y11.20819
G01 X-113.88691 Y12.45505
G01 X-113.88722 Y12.46732
G01 X-113.89443 Y12.61436
G01 X-113.89702 Y12.64060
G01 X-113.91884 Y12.78764
G01 X-113.92509 Y12.81896
G01 X-113.92770 Y12.82940
G01 X-113.94134 Y12.84502
G01 X-114.01663 Y12.93674
G01 X-114.03471 Y12.95673
G01 X-114.05150 Y12.97349
G01 X-114.06878 Y12.99257
G01 X-114.13078 Y13.06811
G01 X-114.13916 Y13.07784
G01 X-114.17685 Y13.11942
G01 X-114.19367 Y13.13994
G01 X-114.29402 Y13.27524
G01 X-114.31223 Y13.30252
G01 X-114.40055 Y13.44984
G01 X-114.42130 Y13.48876
G01 X-114.49697 Y13.64875
G01 X-114.50919 Y13.67634
G01 X-114.61274 Y13.92632
G01 X-114.61693 Y13.93658
G01 X-114.61693 Y14.40397
G01 X-114.60693 Y14.42812
G01 X-114.60693 Y18.26827
G01 X-114.59262 Y18.34003
G01 X-114.56936 Y18.49690
G01 X-114.56067 Y18.58476
G01 X-114.55298 Y18.74158
G01 X-114.55191 Y18.78430
G01 X-114.55191 Y19.06431
G01 X-114.55087 Y19.10703
G01 X-114.54365 Y19.25410
G01 X-114.53499 Y19.34191
G01 X-114.51691 Y19.46365
G01 X-114.51691 Y19.79974
G01 X-114.50047 Y19.88262
G01 X-114.45493 Y20.03271
G01 X-114.41818 Y20.12143
G01 X-114.34426 Y20.25976
G01 X-114.29090 Y20.33962
G01 X-114.23692 Y20.40538
G01 X-114.23692 Y20.71732
G01 X-114.23522 Y20.75176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.79692 Y20.84236 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.79692 Y20.84236
G01 X-114.79692 Y20.40533
G01 X-114.74299 Y20.33962
G01 X-114.68963 Y20.25976
G01 X-114.61569 Y20.12143
G01 X-114.57893 Y20.03271
G01 X-114.53342 Y19.88262
G01 X-114.51691 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.51691 Y19.78819 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.51691 Y19.78819
G01 X-114.51693 Y19.63063
G01 X-114.51691 Y19.58432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.60693 Y18.26827 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.60693 Y18.26827
G01 X-114.61569 Y18.24719
G01 X-114.62694 Y18.22616
G01 X-114.62694 Y14.42810
G01 X-114.61693 Y14.40397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.60077 Y18.58085 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.60077 Y18.58085
G01 X-119.59693 Y18.65908
G01 X-119.59693 Y19.79974
G01 X-119.61342 Y19.88262
G01 X-119.65893 Y20.03271
G01 X-119.69569 Y20.12143
G01 X-119.76963 Y20.25976
G01 X-119.82299 Y20.33962
G01 X-119.84192 Y20.36268
G01 X-119.92248 Y20.46085
G01 X-119.99040 Y20.52877
G01 X-120.11164 Y20.62826
G01 X-120.19150 Y20.68163
G01 X-120.32980 Y20.75557
G01 X-120.41855 Y20.79232
G01 X-120.56864 Y20.83784
G01 X-120.66284 Y20.85659
G01 X-120.81890 Y20.87195
G01 X-120.91496 Y20.87195
G01 X-121.07105 Y20.85659
G01 X-121.16526 Y20.83784
G01 X-121.31532 Y20.79232
G01 X-121.39198 Y20.76057
G01 X-121.40407 Y20.75557
G01 X-121.54237 Y20.68163
G01 X-121.62225 Y20.62826
G01 X-121.74349 Y20.52877
G01 X-121.81141 Y20.46085
G01 X-121.91090 Y20.33962
G01 X-121.96426 Y20.25976
G01 X-122.03818 Y20.12143
G01 X-122.07493 Y20.03271
G01 X-122.12047 Y19.88262
G01 X-122.13691 Y19.79974
G01 X-122.13691 Y18.73802
G01 X-122.13693 Y18.65943
G01 X-122.13307 Y18.58085
G01 X-122.12690 Y18.51829
G01 X-122.12047 Y18.48600
G01 X-122.10691 Y18.44135
G01 X-122.10691 Y14.42815
G01 X-122.11692 Y14.40392
G01 X-122.11692 Y13.19861
G01 X-122.10691 Y13.17448
G01 X-122.10691 Y12.46796
G01 X-122.13020 Y12.44466
G01 X-122.19256 Y12.31284
G01 X-122.23386 Y12.23542
G01 X-122.31181 Y12.10542
G01 X-122.35296 Y12.04378
G01 X-122.44148 Y11.92440
G01 X-122.48382 Y11.87276
G01 X-122.52733 Y11.82478
G01 X-122.54864 Y11.80006
G01 X-122.58016 Y11.76163
G01 X-122.60147 Y11.73692
G01 X-122.64498 Y11.68894
G01 X-122.68733 Y11.63730
G01 X-122.77584 Y11.51792
G01 X-122.81699 Y11.45627
G01 X-122.89492 Y11.32628
G01 X-122.93625 Y11.24886
G01 X-122.99858 Y11.11706
G01 X-122.99957 Y11.10735
G01 X-123.00190 Y11.05932
G01 X-123.00188 Y9.86166
G01 X-122.99647 Y9.85358
G01 X-122.90833 Y9.70654
G01 X-122.86881 Y9.63281
G01 X-122.79929 Y9.48579
G01 X-122.77681 Y9.43169
G01 X-122.72421 Y9.28468
G01 X-122.71194 Y9.24431
G01 X-122.67511 Y9.09730
G01 X-122.66883 Y9.06588
G01 X-122.64702 Y8.91884
G01 X-122.64445 Y8.89265
G01 X-122.63721 Y8.74564
G01 X-122.63691 Y8.73332
G01 X-122.63691 Y7.23332
G01 X-122.63721 Y7.22103
G01 X-122.64445 Y7.07401
G01 X-122.64704 Y7.04777
G01 X-122.66883 Y6.90076
G01 X-122.67508 Y6.86939
G01 X-122.71194 Y6.72235
G01 X-122.72421 Y6.68196
G01 X-122.73980 Y6.63840
G01 X-122.80937 Y6.56164
G01 X-122.84021 Y6.53078
G01 X-122.94928 Y6.43193
G01 X-122.98471 Y6.40287
G01 X-123.10409 Y6.31432
G01 X-123.14750 Y6.28537
G01 X-123.23431 Y6.23332
G01 X-124.09944 Y6.23332
G01 X-124.11575 Y6.20711
G01 X-124.12349 Y6.19510
G01 X-124.15806 Y6.13650
G01 X-124.20157 Y6.05507
G01 X-124.23523 Y5.99878
G01 X-124.26611 Y5.94734
G01 X-124.30886 Y5.86738
G01 X-124.33609 Y5.82187
G01 X-124.33924 Y5.81717
G01 X-124.36571 Y5.77305
G01 X-124.40812 Y5.69367
G01 X-124.43462 Y5.64948
G01 X-124.43772 Y5.64483
G01 X-124.46502 Y5.59924
G01 X-124.50774 Y5.51933
G01 X-124.52225 Y5.49370
G01 X-124.53784 Y5.46769
G01 X-124.56797 Y5.41125
G01 X-124.63474 Y5.27010
G01 X-124.65102 Y5.23335
G01 X-124.75194 Y4.98969
G01 X-124.75194 Y4.63691
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.75194 Y4.98969 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.75194 Y4.98969
G01 X-124.99748 Y4.74412
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.59943 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.59943 Y6.23332
G01 X-127.61546 Y6.26004
G01 X-127.65506 Y6.33388
G01 X-127.72458 Y6.48092
G01 X-127.74701 Y6.53492
G01 X-127.79961 Y6.68194
G01 X-127.81193 Y6.72240
G01 X-127.84873 Y6.86941
G01 X-127.85501 Y6.90076
G01 X-127.87680 Y7.04780
G01 X-127.87939 Y7.07401
G01 X-127.88663 Y7.22103
G01 X-127.88693 Y7.23332
G01 X-127.88693 Y8.73332
G01 X-127.88663 Y8.74564
G01 X-127.87939 Y8.89265
G01 X-127.87680 Y8.91884
G01 X-127.85501 Y9.06588
G01 X-127.84873 Y9.09727
G01 X-127.81193 Y9.24426
G01 X-127.79963 Y9.28468
G01 X-127.74701 Y9.43172
G01 X-127.72455 Y9.48579
G01 X-127.65503 Y9.63281
G01 X-127.62770 Y9.68554
G01 X-127.61106 Y9.69824
G01 X-127.49166 Y9.78678
G01 X-127.42232 Y9.83306
G01 X-127.29232 Y9.91096
G01 X-127.20728 Y9.95635
G01 X-126.49860 Y10.66501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.20728 Y9.95635 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.20728 Y9.95635
G01 X-127.20629 Y9.95653
G01 X-127.05996 Y9.97096
G01 X-126.96390 Y9.97096
G01 X-126.81759 Y9.95653
G01 X-126.72339 Y9.93781
G01 X-126.58269 Y9.89511
G01 X-126.50190 Y9.86166
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.09944 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.09944 Y6.23332
G01 X-124.11547 Y6.26004
G01 X-124.15506 Y6.33388
G01 X-124.22458 Y6.48092
G01 X-124.24701 Y6.53495
G01 X-124.29962 Y6.68196
G01 X-124.31191 Y6.72235
G01 X-124.34874 Y6.86939
G01 X-124.35501 Y6.90076
G01 X-124.37681 Y7.04780
G01 X-124.37940 Y7.07401
G01 X-124.38664 Y7.22103
G01 X-124.38694 Y7.23332
G01 X-124.38694 Y8.73332
G01 X-124.38664 Y8.74564
G01 X-124.37940 Y8.89265
G01 X-124.37681 Y8.91884
G01 X-124.35501 Y9.06588
G01 X-124.34874 Y9.09730
G01 X-124.31191 Y9.24429
G01 X-124.29964 Y9.28465
G01 X-124.24704 Y9.43169
G01 X-124.22456 Y9.48579
G01 X-124.15504 Y9.63281
G01 X-124.11549 Y9.70652
G01 X-124.02738 Y9.85356
G01 X-124.02194 Y9.86169
G01 X-124.02194 Y10.09369
G01 X-122.99858 Y11.11706
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13020 Y12.44466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13020 Y12.44466
G01 X-122.12926 Y12.45432
G01 X-122.12693 Y12.50232
G01 X-122.12693 Y13.17456
G01 X-122.11692 Y13.19861
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.11692 Y14.40392 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.11692 Y14.40392
G01 X-122.12693 Y14.42805
G01 X-122.12693 Y18.51857
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13691 Y19.58432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13691 Y19.58432
G01 X-122.13693 Y19.63063
G01 X-122.13691 Y19.78819
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13691 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13691 Y19.79974
G01 X-122.15342 Y19.88262
G01 X-122.19893 Y20.03271
G01 X-122.23569 Y20.12143
G01 X-122.30963 Y20.25976
G01 X-122.36299 Y20.33962
G01 X-122.38192 Y20.36268
G01 X-122.46248 Y20.46085
G01 X-122.53040 Y20.52877
G01 X-122.65164 Y20.62826
G01 X-122.73150 Y20.68163
G01 X-122.86980 Y20.75557
G01 X-122.95855 Y20.79232
G01 X-123.10864 Y20.83784
G01 X-123.20284 Y20.85659
G01 X-123.35890 Y20.87195
G01 X-123.45496 Y20.87195
G01 X-123.61105 Y20.85659
G01 X-123.70526 Y20.83784
G01 X-123.85532 Y20.79232
G01 X-123.93198 Y20.76057
G01 X-123.94407 Y20.75557
G01 X-124.08237 Y20.68163
G01 X-124.16225 Y20.62826
G01 X-124.28349 Y20.52877
G01 X-124.35141 Y20.46085
G01 X-124.45090 Y20.33962
G01 X-124.50426 Y20.25976
G01 X-124.57818 Y20.12143
G01 X-124.61493 Y20.03271
G01 X-124.66047 Y19.88262
G01 X-124.67693 Y19.79974
G01 X-124.67693 Y19.37074
G01 X-124.67023 Y19.29603
G01 X-124.66301 Y19.14899
G01 X-124.66192 Y19.10432
G01 X-124.66192 Y18.78430
G01 X-124.66083 Y18.73962
G01 X-124.65313 Y18.58280
G01 X-124.64407 Y18.49103
G01 X-124.62692 Y18.37539
G01 X-124.62695 Y14.42810
G01 X-124.61694 Y14.40394
G01 X-124.61694 Y13.19864
G01 X-124.62695 Y13.17451
G01 X-124.62695 Y13.05030
G01 X-124.62928 Y13.00230
G01 X-124.63022 Y12.99264
G01 X-124.69258 Y12.86082
G01 X-124.73388 Y12.78340
G01 X-124.81181 Y12.65340
G01 X-124.85295 Y12.59176
G01 X-124.94150 Y12.47238
G01 X-124.98384 Y12.42074
G01 X-125.08270 Y12.31167
G01 X-125.10492 Y12.28833
G01 X-126.02392 Y11.36933
G01 X-126.04615 Y11.34599
G01 X-126.14500 Y11.23692
G01 X-126.18734 Y11.18528
G01 X-126.27589 Y11.06590
G01 X-126.31701 Y11.00426
G01 X-126.39496 Y10.87426
G01 X-126.43626 Y10.79684
G01 X-126.49860 Y10.66501
G01 X-126.49959 Y10.65534
G01 X-126.50192 Y10.60730
G01 X-126.50190 Y9.86166
G01 X-126.49649 Y9.85358
G01 X-126.40835 Y9.70654
G01 X-126.36885 Y9.63286
G01 X-126.29931 Y9.48582
G01 X-126.27680 Y9.43169
G01 X-126.22420 Y9.28465
G01 X-126.21193 Y9.24429
G01 X-126.17510 Y9.09730
G01 X-126.16883 Y9.06588
G01 X-126.14703 Y8.91884
G01 X-126.14444 Y8.89263
G01 X-126.13723 Y8.74561
G01 X-126.13692 Y8.73332
G01 X-126.13692 Y7.23332
G01 X-126.13723 Y7.22105
G01 X-126.14444 Y7.07401
G01 X-126.14703 Y7.04780
G01 X-126.16883 Y6.90076
G01 X-126.17510 Y6.86939
G01 X-126.21193 Y6.72235
G01 X-126.22422 Y6.68196
G01 X-126.23979 Y6.63840
G01 X-126.30937 Y6.56164
G01 X-126.34023 Y6.53078
G01 X-126.44932 Y6.43190
G01 X-126.48473 Y6.40287
G01 X-126.60411 Y6.31432
G01 X-126.64752 Y6.28537
G01 X-126.73431 Y6.23332
G01 X-127.59943 Y6.23332
G01 X-127.61574 Y6.20711
G01 X-127.62349 Y6.19510
G01 X-127.65805 Y6.13650
G01 X-127.70156 Y6.05507
G01 X-127.73522 Y5.99878
G01 X-127.76608 Y5.94739
G01 X-127.80885 Y5.86738
G01 X-127.83611 Y5.82187
G01 X-127.83923 Y5.81719
G01 X-127.86573 Y5.77300
G01 X-127.90812 Y5.69367
G01 X-127.93458 Y5.64950
G01 X-127.93773 Y5.64480
G01 X-127.96501 Y5.59924
G01 X-128.00774 Y5.51933
G01 X-128.02227 Y5.49367
G01 X-128.03784 Y5.46769
G01 X-128.06796 Y5.41125
G01 X-128.13471 Y5.27010
G01 X-128.15102 Y5.23335
G01 X-128.25191 Y4.98971
G01 X-128.25193 Y4.63691
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-128.25191 Y4.98971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-128.25191 Y4.98971
G01 X-128.49752 Y4.74412
G01 X-128.71454 Y4.65603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.09942 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.09942 Y6.23332
G01 X-131.11545 Y6.26004
G01 X-131.15503 Y6.33386
G01 X-131.22457 Y6.48090
G01 X-131.24702 Y6.53495
G01 X-131.29963 Y6.68196
G01 X-131.31192 Y6.72240
G01 X-131.34873 Y6.86941
G01 X-131.35497 Y6.90073
G01 X-131.37679 Y7.04777
G01 X-131.37938 Y7.07404
G01 X-131.38662 Y7.22105
G01 X-131.38690 Y7.23332
G01 X-131.38690 Y8.73332
G01 X-131.38662 Y8.74561
G01 X-131.37938 Y8.89263
G01 X-131.37679 Y8.91886
G01 X-131.35497 Y9.06591
G01 X-131.34873 Y9.09727
G01 X-131.31192 Y9.24426
G01 X-131.29963 Y9.28465
G01 X-131.24702 Y9.43169
G01 X-131.22455 Y9.48579
G01 X-131.20798 Y9.52079
G01 X-131.12488 Y9.59613
G01 X-131.07733 Y9.63514
G01 X-130.95795 Y9.72369
G01 X-130.90072 Y9.76187
G01 X-130.77072 Y9.83979
G01 X-130.69854 Y9.87830
G01 X-130.55739 Y9.94505
G01 X-130.49465 Y9.97096
G01 X-130.46392 Y9.97096
G01 X-130.31759 Y9.95653
G01 X-130.22338 Y9.93781
G01 X-130.08269 Y9.89511
G01 X-130.00189 Y9.86166
G01 X-129.99648 Y9.85358
G01 X-129.90834 Y9.70654
G01 X-129.86885 Y9.63286
G01 X-129.79930 Y9.48582
G01 X-129.77680 Y9.43169
G01 X-129.72419 Y9.28465
G01 X-129.71192 Y9.24426
G01 X-129.67509 Y9.09727
G01 X-129.66885 Y9.06591
G01 X-129.64703 Y8.91886
G01 X-129.64444 Y8.89263
G01 X-129.63722 Y8.74561
G01 X-129.63692 Y8.73332
G01 X-129.63692 Y7.23332
G01 X-129.63722 Y7.22105
G01 X-129.64444 Y7.07401
G01 X-129.64703 Y7.04777
G01 X-129.66885 Y6.90073
G01 X-129.67509 Y6.86941
G01 X-129.71192 Y6.72237
G01 X-129.72422 Y6.68196
G01 X-129.73979 Y6.63840
G01 X-129.80936 Y6.56164
G01 X-129.84022 Y6.53078
G01 X-129.94931 Y6.43190
G01 X-129.98472 Y6.40287
G01 X-130.10410 Y6.31435
G01 X-130.14751 Y6.28537
G01 X-130.23433 Y6.23332
G01 X-131.09942 Y6.23332
G01 X-131.11573 Y6.20711
G01 X-131.12348 Y6.19510
G01 X-131.15802 Y6.13652
G01 X-131.20156 Y6.05507
G01 X-131.23521 Y5.99880
G01 X-131.26610 Y5.94734
G01 X-131.30885 Y5.86738
G01 X-131.33610 Y5.82187
G01 X-131.33925 Y5.81717
G01 X-131.36572 Y5.77300
G01 X-131.40811 Y5.69367
G01 X-131.43458 Y5.64950
G01 X-131.43773 Y5.64480
G01 X-131.46498 Y5.59929
G01 X-131.50773 Y5.51933
G01 X-131.52226 Y5.49370
G01 X-131.53780 Y5.46774
G01 X-131.56798 Y5.41118
G01 X-131.63473 Y5.27003
G01 X-131.65101 Y5.23335
G01 X-131.75190 Y4.98971
G01 X-131.75193 Y4.63693
G01 X-131.71586 Y4.57176
G01 X-131.68393 Y4.49462
G01 X-131.62840 Y4.29114
G01 X-131.61824 Y4.21402
G01 X-131.61217 Y4.12180
G01 X-131.61217 Y3.73333
G01 X-131.61134 Y3.69891
G01 X-131.60877 Y3.64699
G01 X-131.59668 Y3.55263
G01 X-131.58454 Y3.48474
G01 X-131.58261 Y3.47628
G01 X-131.54113 Y3.34425
G01 X-131.52998 Y3.31164
G01 X-131.51479 Y3.28067
G01 X-131.45076 Y3.15799
G01 X-131.44616 Y3.15065
G01 X-131.40676 Y3.09411
G01 X-131.34855 Y3.01877
G01 X-131.31367 Y2.98027
G01 X-131.26498 Y2.93158
G01 X-131.22648 Y2.89670
G01 X-131.15114 Y2.83849
G01 X-131.09460 Y2.79909
G01 X-131.08726 Y2.79449
G01 X-130.96458 Y2.73046
G01 X-130.93361 Y2.71527
G01 X-130.90100 Y2.70412
G01 X-130.76897 Y2.66264
G01 X-130.76051 Y2.66071
G01 X-130.69262 Y2.64857
G01 X-130.59826 Y2.63648
G01 X-130.54634 Y2.63391
G01 X-130.47756 Y2.63391
G01 X-130.42559 Y2.63648
G01 X-130.33125 Y2.64857
G01 X-130.26333 Y2.66071
G01 X-130.25487 Y2.66264
G01 X-130.12285 Y2.70412
G01 X-130.09023 Y2.71527
G01 X-130.05927 Y2.73046
G01 X-129.93659 Y2.79449
G01 X-129.92925 Y2.79909
G01 X-129.87271 Y2.83849
G01 X-129.79737 Y2.89670
G01 X-129.75886 Y2.93158
G01 X-129.71017 Y2.98027
G01 X-129.67530 Y3.01877
G01 X-129.61708 Y3.09411
G01 X-129.57769 Y3.15065
G01 X-129.57309 Y3.15799
G01 X-129.50905 Y3.28067
G01 X-129.49387 Y3.31164
G01 X-129.48271 Y3.34425
G01 X-129.44124 Y3.47628
G01 X-129.43931 Y3.48474
G01 X-129.42716 Y3.55263
G01 X-129.41507 Y3.64699
G01 X-129.41251 Y3.69891
G01 X-129.41167 Y3.73333
G01 X-129.41167 Y3.82081
G01 X-129.41017 Y3.86673
G01 X-129.40761 Y3.90564
G01 X-129.39105 Y4.01905
G01 X-129.37375 Y4.04255
G01 X-129.32640 Y4.10427
G01 X-129.26544 Y4.17381
G01 X-128.96445 Y4.47480
G01 X-128.93103 Y4.50612
G01 X-128.90171 Y4.53185
G01 X-128.78371 Y4.61613
G01 X-128.71454 Y4.65603
G01 X-128.49364 Y4.74570
G01 X-128.48475 Y4.74412
G01 X-128.41025 Y4.72418
G01 X-128.32991 Y4.69495
G01 X-128.26255 Y4.65606
G01 X-128.25193 Y4.63691
G01 X-128.21586 Y4.57176
G01 X-128.18394 Y4.49462
G01 X-128.12841 Y4.29114
G01 X-128.11825 Y4.21402
G01 X-128.11218 Y4.12180
G01 X-128.11218 Y3.73333
G01 X-128.11134 Y3.69886
G01 X-128.10878 Y3.64702
G01 X-128.09666 Y3.55258
G01 X-128.08455 Y3.48479
G01 X-128.08259 Y3.47628
G01 X-128.04114 Y3.34433
G01 X-128.02999 Y3.31161
G01 X-128.01480 Y3.28067
G01 X-127.95076 Y3.15799
G01 X-127.94617 Y3.15065
G01 X-127.90672 Y3.09406
G01 X-127.84855 Y3.01877
G01 X-127.81363 Y2.98024
G01 X-127.76499 Y2.93160
G01 X-127.72648 Y2.89670
G01 X-127.65120 Y2.83851
G01 X-127.59461 Y2.79909
G01 X-127.58726 Y2.79449
G01 X-127.46458 Y2.73046
G01 X-127.43362 Y2.71527
G01 X-127.40101 Y2.70412
G01 X-127.26898 Y2.66264
G01 X-127.26052 Y2.66071
G01 X-127.19260 Y2.64857
G01 X-127.09826 Y2.63648
G01 X-127.04630 Y2.63391
G01 X-126.97751 Y2.63391
G01 X-126.92560 Y2.63648
G01 X-126.83123 Y2.64857
G01 X-126.76334 Y2.66071
G01 X-126.75488 Y2.66264
G01 X-126.62285 Y2.70412
G01 X-126.59024 Y2.71527
G01 X-126.55928 Y2.73046
G01 X-126.43659 Y2.79449
G01 X-126.42925 Y2.79909
G01 X-126.37271 Y2.83849
G01 X-126.29738 Y2.89670
G01 X-126.25887 Y2.93158
G01 X-126.21018 Y2.98027
G01 X-126.17530 Y3.01877
G01 X-126.11709 Y3.09411
G01 X-126.07772 Y3.15060
G01 X-126.07309 Y3.15799
G01 X-126.00909 Y3.28065
G01 X-125.99385 Y3.31164
G01 X-125.98270 Y3.34433
G01 X-125.94124 Y3.47628
G01 X-125.93929 Y3.48479
G01 X-125.92717 Y3.55263
G01 X-125.91508 Y3.64699
G01 X-125.91252 Y3.69891
G01 X-125.91168 Y3.73333
G01 X-125.91168 Y3.82081
G01 X-125.91018 Y3.86673
G01 X-125.90761 Y3.90564
G01 X-125.89108 Y4.01905
G01 X-125.87376 Y4.04255
G01 X-125.82638 Y4.10427
G01 X-125.76545 Y4.17381
G01 X-125.46443 Y4.47483
G01 X-125.43111 Y4.50605
G01 X-125.40182 Y4.53175
G01 X-125.28366 Y4.61613
G01 X-125.21450 Y4.65606
G01 X-124.99751 Y4.74412
G01 X-124.99748 Y4.74412
G01 X-124.99365 Y4.74570
G01 X-124.98473 Y4.74412
G01 X-124.91023 Y4.72418
G01 X-124.82989 Y4.69495
G01 X-124.76256 Y4.65608
G01 X-124.75194 Y4.63691
G01 X-124.71587 Y4.57173
G01 X-124.68392 Y4.49459
G01 X-124.62839 Y4.29114
G01 X-124.61826 Y4.21402
G01 X-124.61219 Y4.12180
G01 X-124.61219 Y3.73333
G01 X-124.61132 Y3.69886
G01 X-124.60878 Y3.64699
G01 X-124.59667 Y3.55258
G01 X-124.58455 Y3.48479
G01 X-124.58260 Y3.47625
G01 X-124.54114 Y3.34433
G01 X-124.52999 Y3.31161
G01 X-124.51478 Y3.28062
G01 X-124.45077 Y3.15802
G01 X-124.44612 Y3.15060
G01 X-124.40675 Y3.09409
G01 X-124.34856 Y3.01877
G01 X-124.31366 Y2.98027
G01 X-124.26500 Y2.93160
G01 X-124.22649 Y2.89668
G01 X-124.15118 Y2.83854
G01 X-124.09461 Y2.79909
G01 X-124.08725 Y2.79449
G01 X-123.96459 Y2.73046
G01 X-123.93360 Y2.71527
G01 X-123.90101 Y2.70412
G01 X-123.76896 Y2.66264
G01 X-123.76053 Y2.66071
G01 X-123.69261 Y2.64857
G01 X-123.59825 Y2.63648
G01 X-123.54630 Y2.63391
G01 X-123.47754 Y2.63391
G01 X-123.42560 Y2.63648
G01 X-123.33124 Y2.64857
G01 X-123.26332 Y2.66071
G01 X-123.25489 Y2.66264
G01 X-123.12283 Y2.70412
G01 X-123.09025 Y2.71527
G01 X-123.05926 Y2.73046
G01 X-122.93660 Y2.79449
G01 X-122.92924 Y2.79909
G01 X-122.87267 Y2.83854
G01 X-122.79736 Y2.89668
G01 X-122.75885 Y2.93160
G01 X-122.71019 Y2.98027
G01 X-122.67529 Y3.01877
G01 X-122.61709 Y3.09409
G01 X-122.57772 Y3.15060
G01 X-122.57308 Y3.15799
G01 X-122.50907 Y3.28065
G01 X-122.49388 Y3.31161
G01 X-122.48270 Y3.34433
G01 X-122.44125 Y3.47628
G01 X-122.43929 Y3.48479
G01 X-122.42718 Y3.55258
G01 X-122.41506 Y3.64699
G01 X-122.41252 Y3.69886
G01 X-122.41168 Y3.73333
G01 X-122.41168 Y3.82081
G01 X-122.41016 Y3.86673
G01 X-122.40762 Y3.90564
G01 X-122.39106 Y4.01905
G01 X-122.37376 Y4.04255
G01 X-122.32639 Y4.10427
G01 X-122.26543 Y4.17381
G01 X-121.96444 Y4.47480
G01 X-121.93102 Y4.50612
G01 X-121.90170 Y4.53183
G01 X-121.78370 Y4.61613
G01 X-121.71453 Y4.65603
G01 X-121.49751 Y4.74410
G01 X-121.49746 Y4.74412
G01 X-121.49363 Y4.74570
G01 X-121.48474 Y4.74412
G01 X-121.41024 Y4.72418
G01 X-121.32990 Y4.69495
G01 X-121.26254 Y4.65606
G01 X-121.21585 Y4.57176
G01 X-121.18393 Y4.49462
G01 X-121.12840 Y4.29114
G01 X-121.11824 Y4.21402
G01 X-121.11217 Y4.12180
G01 X-121.11217 Y3.73333
G01 X-121.11133 Y3.69891
G01 X-121.10877 Y3.64699
G01 X-121.09668 Y3.55263
G01 X-121.08456 Y3.48479
G01 X-121.08260 Y3.47628
G01 X-121.04115 Y3.34433
G01 X-121.03000 Y3.31164
G01 X-121.01476 Y3.28065
G01 X-120.95075 Y3.15799
G01 X-120.94613 Y3.15060
G01 X-120.90676 Y3.09411
G01 X-120.84854 Y3.01877
G01 X-120.81367 Y2.98027
G01 X-120.76498 Y2.93158
G01 X-120.72647 Y2.89670
G01 X-120.65113 Y2.83849
G01 X-120.59459 Y2.79909
G01 X-120.58725 Y2.79449
G01 X-120.46457 Y2.73046
G01 X-120.43361 Y2.71527
G01 X-120.40100 Y2.70412
G01 X-120.26897 Y2.66264
G01 X-120.26051 Y2.66071
G01 X-120.19261 Y2.64857
G01 X-120.09825 Y2.63648
G01 X-120.04634 Y2.63391
G01 X-119.97755 Y2.63391
G01 X-119.92558 Y2.63648
G01 X-119.83125 Y2.64857
G01 X-119.76333 Y2.66071
G01 X-119.75487 Y2.66264
G01 X-119.62284 Y2.70412
G01 X-119.59025 Y2.71524
G01 X-119.55926 Y2.73046
G01 X-119.43661 Y2.79449
G01 X-119.42924 Y2.79909
G01 X-119.37268 Y2.83854
G01 X-119.29737 Y2.89668
G01 X-119.25886 Y2.93160
G01 X-119.21022 Y2.98024
G01 X-119.17529 Y3.01877
G01 X-119.11713 Y3.09406
G01 X-119.07768 Y3.15065
G01 X-119.07308 Y3.15802
G01 X-119.00905 Y3.28067
G01 X-118.99386 Y3.31161
G01 X-118.98271 Y3.34433
G01 X-118.94126 Y3.47628
G01 X-118.93930 Y3.48479
G01 X-118.92719 Y3.55258
G01 X-118.91507 Y3.64702
G01 X-118.91250 Y3.69886
G01 X-118.91167 Y3.73333
G01 X-118.91167 Y3.82081
G01 X-118.91017 Y3.86653
G01 X-118.90763 Y3.90541
G01 X-118.89107 Y4.01908
G01 X-118.87369 Y4.04262
G01 X-118.82632 Y4.10437
G01 X-118.76544 Y4.17381
G01 X-118.46445 Y4.47480
G01 X-118.43102 Y4.50612
G01 X-118.40171 Y4.53185
G01 X-118.28370 Y4.61613
G01 X-118.21454 Y4.65603
G01 X-117.99363 Y4.74570
G01 X-117.98474 Y4.74412
G01 X-117.91025 Y4.72418
G01 X-117.82991 Y4.69495
G01 X-117.76254 Y4.65606
G01 X-117.75193 Y4.63691
G01 X-117.71586 Y4.57176
G01 X-117.68393 Y4.49462
G01 X-117.62841 Y4.29114
G01 X-117.61825 Y4.21402
G01 X-117.61218 Y4.12180
G01 X-117.61218 Y3.73333
G01 X-117.61134 Y3.69891
G01 X-117.60877 Y3.64699
G01 X-117.59668 Y3.55263
G01 X-117.58454 Y3.48474
G01 X-117.58261 Y3.47628
G01 X-117.54113 Y3.34425
G01 X-117.52998 Y3.31164
G01 X-117.51479 Y3.28067
G01 X-117.45076 Y3.15799
G01 X-117.44616 Y3.15065
G01 X-117.40677 Y3.09411
G01 X-117.34855 Y3.01877
G01 X-117.31368 Y2.98027
G01 X-117.26498 Y2.93158
G01 X-117.22648 Y2.89670
G01 X-117.15114 Y2.83849
G01 X-117.09460 Y2.79909
G01 X-117.08726 Y2.79449
G01 X-116.96458 Y2.73046
G01 X-116.93362 Y2.71527
G01 X-116.90100 Y2.70412
G01 X-116.76897 Y2.66264
G01 X-116.76051 Y2.66071
G01 X-116.69260 Y2.64857
G01 X-116.59826 Y2.63648
G01 X-116.54629 Y2.63391
G01 X-116.47751 Y2.63391
G01 X-116.42559 Y2.63648
G01 X-116.33123 Y2.64857
G01 X-116.26334 Y2.66071
G01 X-116.25488 Y2.66264
G01 X-116.12285 Y2.70412
G01 X-116.09023 Y2.71527
G01 X-116.05927 Y2.73046
G01 X-115.93659 Y2.79449
G01 X-115.92925 Y2.79909
G01 X-115.87271 Y2.83849
G01 X-115.79737 Y2.89670
G01 X-115.75887 Y2.93158
G01 X-115.71017 Y2.98027
G01 X-115.67530 Y3.01877
G01 X-115.61708 Y3.09411
G01 X-115.57769 Y3.15065
G01 X-115.57309 Y3.15799
G01 X-115.50906 Y3.28067
G01 X-115.49387 Y3.31164
G01 X-115.48272 Y3.34425
G01 X-115.44124 Y3.47628
G01 X-115.43931 Y3.48474
G01 X-115.42717 Y3.55263
G01 X-115.41508 Y3.64699
G01 X-115.41251 Y3.69891
G01 X-115.41167 Y3.73333
G01 X-115.41167 Y3.82081
G01 X-115.41017 Y3.86673
G01 X-115.40761 Y3.90564
G01 X-115.39107 Y4.01905
G01 X-115.37375 Y4.04255
G01 X-115.32638 Y4.10427
G01 X-115.26545 Y4.17381
G01 X-114.96446 Y4.47480
G01 X-114.93103 Y4.50612
G01 X-114.90172 Y4.53183
G01 X-114.78371 Y4.61613
G01 X-114.71454 Y4.65603
G01 X-114.49750 Y4.74412
G01 X-114.49748 Y4.74412
G01 X-114.49364 Y4.74570
G01 X-114.48475 Y4.74412
G01 X-114.41025 Y4.72418
G01 X-114.32994 Y4.69497
G01 X-114.26253 Y4.65606
G01 X-114.25193 Y4.63693
G01 X-114.21592 Y4.57186
G01 X-114.18396 Y4.49469
G01 X-114.12839 Y4.29104
G01 X-114.11823 Y4.21390
G01 X-114.11218 Y4.12180
G01 X-114.11218 Y3.73333
G01 X-114.11135 Y3.69886
G01 X-114.10878 Y3.64702
G01 X-114.09666 Y3.55258
G01 X-114.08455 Y3.48479
G01 X-114.08259 Y3.47628
G01 X-114.04114 Y3.34433
G01 X-114.02999 Y3.31161
G01 X-114.01477 Y3.28062
G01 X-113.95077 Y3.15802
G01 X-113.94612 Y3.15060
G01 X-113.90675 Y3.09409
G01 X-113.84856 Y3.01877
G01 X-113.81366 Y2.98027
G01 X-113.76499 Y2.93160
G01 X-113.72648 Y2.89668
G01 X-113.65117 Y2.83854
G01 X-113.59461 Y2.79909
G01 X-113.58724 Y2.79449
G01 X-113.46459 Y2.73046
G01 X-113.43360 Y2.71524
G01 X-113.40101 Y2.70412
G01 X-113.26898 Y2.66264
G01 X-113.26052 Y2.66071
G01 X-113.19260 Y2.64857
G01 X-113.09824 Y2.63648
G01 X-113.04630 Y2.63391
G01 X-112.97752 Y2.63391
G01 X-112.92560 Y2.63648
G01 X-112.83124 Y2.64857
G01 X-112.76334 Y2.66071
G01 X-112.75488 Y2.66264
G01 X-112.62285 Y2.70412
G01 X-112.59024 Y2.71527
G01 X-112.55923 Y2.73048
G01 X-112.43660 Y2.79449
G01 X-112.42923 Y2.79912
G01 X-112.37272 Y2.83849
G01 X-112.29738 Y2.89670
G01 X-112.25887 Y2.93158
G01 X-112.21018 Y2.98027
G01 X-112.17531 Y3.01877
G01 X-112.11709 Y3.09411
G01 X-112.07772 Y3.15060
G01 X-112.07310 Y3.15799
G01 X-112.00909 Y3.28065
G01 X-111.99385 Y3.31164
G01 X-111.98270 Y3.34433
G01 X-111.94125 Y3.47628
G01 X-111.93929 Y3.48479
G01 X-111.92717 Y3.55263
G01 X-111.91508 Y3.64699
G01 X-111.91252 Y3.69891
G01 X-111.91168 Y3.73333
G01 X-111.91168 Y3.82081
G01 X-111.91018 Y3.86673
G01 X-111.90762 Y3.90564
G01 X-111.89108 Y4.01905
G01 X-111.87376 Y4.04255
G01 X-111.82639 Y4.10427
G01 X-111.76545 Y4.17381
G01 X-111.46444 Y4.47483
G01 X-111.43101 Y4.50612
G01 X-111.40170 Y4.53185
G01 X-111.28369 Y4.61613
G01 X-111.21453 Y4.65606
G01 X-110.99751 Y4.74412
G01 X-110.99748 Y4.74412
G01 X-110.75192 Y4.98971
G01 X-110.65100 Y5.23332
G01 X-110.63475 Y5.27003
G01 X-110.56799 Y5.41120
G01 X-110.53785 Y5.46769
G01 X-110.52225 Y5.49370
G01 X-110.50775 Y5.51933
G01 X-110.46502 Y5.59924
G01 X-110.43772 Y5.64483
G01 X-110.43462 Y5.64948
G01 X-110.40813 Y5.69367
G01 X-110.36571 Y5.77305
G01 X-110.33924 Y5.81717
G01 X-110.33609 Y5.82187
G01 X-110.30886 Y5.86738
G01 X-110.26612 Y5.94734
G01 X-110.23523 Y5.99878
G01 X-110.20157 Y6.05507
G01 X-110.15806 Y6.13650
G01 X-110.12349 Y6.19510
G01 X-110.11575 Y6.20711
G01 X-110.09944 Y6.23332
G01 X-108.92439 Y6.23332
G01 X-108.90838 Y6.26004
G01 X-108.86879 Y6.33388
G01 X-108.79927 Y6.48090
G01 X-108.77681 Y6.53495
G01 X-108.72421 Y6.68196
G01 X-108.71194 Y6.72235
G01 X-108.67509 Y6.86939
G01 X-108.66884 Y6.90076
G01 X-108.64704 Y7.04777
G01 X-108.64445 Y7.07401
G01 X-108.63721 Y7.22103
G01 X-108.63691 Y7.23332
G01 X-108.63691 Y9.45818
G01 X-108.63660 Y9.47048
G01 X-108.62939 Y9.61752
G01 X-108.62680 Y9.64376
G01 X-108.60498 Y9.79080
G01 X-108.59873 Y9.82211
G01 X-108.56190 Y9.96915
G01 X-108.54963 Y10.00954
G01 X-108.49703 Y10.15658
G01 X-108.48680 Y10.18310
G01 X-108.27194 Y10.70182
G01 X-107.10862 Y11.86514
G01 X-107.07298 Y11.89742
G01 X-106.95932 Y11.99069
G01 X-106.87946 Y12.04406
G01 X-106.80206 Y12.08543
G01 X-106.74979 Y12.11337
G01 X-106.66104 Y12.15013
G01 X-106.52035 Y12.19280
G01 X-106.42614 Y12.21154
G01 X-106.27981 Y12.22597
G01 X-106.23181 Y12.22831
G01 X-104.18556 Y12.22831
G01 X-103.90154 Y12.51233
G01 X-103.79808 Y12.57436
G01 X-103.72290 Y12.62452
G01 X-103.60060 Y12.71525
G01 X-103.59689 Y12.72142
G01 X-103.55531 Y12.79894
G01 X-103.48114 Y12.95579
G01 X-103.45760 Y13.01248
G01 X-103.40146 Y13.16933
G01 X-103.38866 Y13.21149
G01 X-103.34937 Y13.36831
G01 X-103.34289 Y13.40085
G01 X-103.31962 Y13.55767
G01 X-103.31693 Y13.58482
G01 X-103.30923 Y13.74166
G01 X-103.30923 Y13.76699
G01 X-103.31693 Y13.92383
G01 X-103.31962 Y13.95099
G01 X-103.34289 Y14.10781
G01 X-103.34937 Y14.14034
G01 X-103.38866 Y14.29716
G01 X-103.40146 Y14.33933
G01 X-103.45760 Y14.49617
G01 X-103.48114 Y14.55286
G01 X-103.55531 Y14.70971
G01 X-103.59689 Y14.78723
G01 X-103.66989 Y14.90902
G01 X-103.66991 Y16.21771
G01 X-105.39655 Y17.94432
G01 X-109.73249 Y17.94432
G01 X-109.76248 Y17.90777
G01 X-109.83040 Y17.83985
G01 X-109.95164 Y17.74036
G01 X-110.03150 Y17.68700
G01 X-110.16980 Y17.61306
G01 X-110.25855 Y17.57630
G01 X-110.40864 Y17.53079
G01 X-110.50284 Y17.51204
G01 X-110.65890 Y17.49667
G01 X-110.75496 Y17.49667
G01 X-110.91105 Y17.51204
G01 X-111.00526 Y17.53079
G01 X-111.15532 Y17.57630
G01 X-111.24407 Y17.61306
G01 X-111.38237 Y17.68700
G01 X-111.46225 Y17.74036
G01 X-111.58349 Y17.83985
G01 X-111.65141 Y17.90777
G01 X-111.66555 Y17.92502
G01 X-111.75090 Y18.02901
G01 X-111.80426 Y18.10886
G01 X-111.87818 Y18.24719
G01 X-111.91493 Y18.33591
G01 X-111.96047 Y18.48600
G01 X-111.97693 Y18.56873
G01 X-111.97693 Y19.79974
G01 X-111.96047 Y19.88262
G01 X-111.91493 Y20.03271
G01 X-111.87818 Y20.12143
G01 X-111.80426 Y20.25976
G01 X-111.75090 Y20.33962
G01 X-111.65141 Y20.46085
G01 X-111.58349 Y20.52877
G01 X-111.46225 Y20.62826
G01 X-111.38237 Y20.68163
G01 X-111.24407 Y20.75557
G01 X-111.15532 Y20.79232
G01 X-111.00526 Y20.83784
G01 X-110.91105 Y20.85659
G01 X-110.75496 Y20.87195
G01 X-110.65890 Y20.87195
G01 X-110.50284 Y20.85659
G01 X-110.40864 Y20.83784
G01 X-110.25855 Y20.79232
G01 X-110.16980 Y20.75557
G01 X-110.03150 Y20.68163
G01 X-109.95164 Y20.62826
G01 X-109.83040 Y20.52877
G01 X-109.76248 Y20.46085
G01 X-109.73249 Y20.42430
G01 X-104.88294 Y20.42430
G01 X-104.83491 Y20.42197
G01 X-104.68858 Y20.40754
G01 X-104.59437 Y20.38879
G01 X-104.45368 Y20.34612
G01 X-104.36493 Y20.30937
G01 X-104.23527 Y20.24005
G01 X-104.15541 Y20.18669
G01 X-104.04174 Y20.09342
G01 X-104.00613 Y20.06113
G01 X-101.87959 Y17.93465
G01 X-101.55313 Y17.60815
G01 X-101.52082 Y17.57252
G01 X-101.42755 Y17.45888
G01 X-101.42692 Y17.45791
G01 X-101.39887 Y17.36574
G01 X-101.36207 Y17.21872
G01 X-101.34579 Y17.13709
G01 X-101.32397 Y16.99007
G01 X-101.31653 Y16.91484
G01 X-101.30931 Y16.76779
G01 X-101.30842 Y16.73132
G01 X-101.30842 Y12.23031
G01 X-101.30931 Y12.19384
G01 X-101.31653 Y12.04682
G01 X-101.32397 Y11.97161
G01 X-101.34579 Y11.82460
G01 X-101.36207 Y11.74296
G01 X-101.39887 Y11.59595
G01 X-101.42692 Y11.50372
G01 X-101.42692 Y10.71871
G01 X-101.39926 Y10.61734
G01 X-101.38912 Y10.54020
G01 X-101.38145 Y10.42328
G01 X-101.38145 Y9.54086
G01 X-101.36194 Y9.47413
G01 X-101.32265 Y9.31729
G01 X-101.30787 Y9.24312
G01 X-101.28460 Y9.08630
G01 X-101.27794 Y9.01881
G01 X-101.27025 Y8.86197
G01 X-101.27025 Y8.79667
G01 X-101.27794 Y8.63985
G01 X-101.28460 Y8.57236
G01 X-101.30787 Y8.41551
G01 X-101.32265 Y8.34132
G01 X-101.36194 Y8.18450
G01 X-101.38145 Y8.11780
G01 X-101.38145 Y1.47451
G01 X-101.38285 Y1.42454
G01 X-101.38663 Y1.35695
G01 X-101.38777 Y1.27794
G01 X-101.38777 Y1.27740
G01 X-101.38800 Y1.23077
G01 X-101.38803 Y1.22724
G01 X-101.38399 Y1.21482
G01 X-101.34233 Y1.12127
G01 X-101.28214 Y1.03844
G01 X-101.26723 Y1.02500
G01 X-101.20601 Y0.96991
G01 X-101.15651 Y0.93394
G01 X-101.05608 Y0.87771
G01 X-100.94528 Y0.84641
G01 X-100.91470 Y0.84156
G01 X-100.83794 Y0.83552
G01 X-1.42450 Y0.83552
G01 X-1.34777 Y0.84156
G01 X-1.27296 Y0.85955
G01 X-1.21477 Y0.87847
G01 X-1.12125 Y0.92013
G01 X-1.03845 Y0.98027
G01 X-0.96994 Y1.05635
G01 X-0.93397 Y1.10582
G01 X-0.87766 Y1.20633
G01 X-0.84637 Y1.31720
G01 X-0.84152 Y1.34781
G01 X-0.83547 Y1.42452
G01 X-0.83547 Y13.28672
G01 X-0.84149 Y13.36336
G01 X-0.85943 Y13.43808
G01 X-0.87832 Y13.49627
G01 X-0.92000 Y13.58990
G01 X-0.98023 Y13.67278
G01 X-1.02498 Y13.71309
G01 X-1.05638 Y13.74136
G01 X-1.10588 Y13.77733
G01 X-1.19458 Y13.82853
G01 X-1.27456 Y13.85452
G01 X-1.39389 Y13.82289
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.13907 Y12.38571 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.13907 Y12.38571
G01 X-5.29216 Y12.23262
G01 X-5.32193 Y12.23262
G01 X-5.32185 Y12.45416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-6.38959 Y14.62147 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-6.38959 Y14.62147
G01 X-6.42068 Y14.59335
G01 X-6.44544 Y14.57014
G01 X-6.45413 Y14.56168
G01 X-6.47806 Y14.53925
G01 X-6.50534 Y14.51469
G01 X-6.52797 Y14.49343
G01 X-6.53361 Y14.48792
G01 X-6.55583 Y14.46709
G01 X-6.57872 Y14.44651
G01 X-6.60033 Y14.42622
G01 X-6.60458 Y14.42205
G01 X-6.62606 Y14.40189
G01 X-6.64753 Y14.38263
G01 X-6.66899 Y14.36247
G01 X-6.67366 Y14.35789
G01 X-6.69528 Y14.33757
G01 X-6.71822 Y14.31697
G01 X-6.74041 Y14.29615
G01 X-6.74588 Y14.29084
G01 X-6.76851 Y14.26958
G01 X-6.79579 Y14.24502
G01 X-6.81971 Y14.22259
G01 X-6.82840 Y14.21413
G01 X-6.85317 Y14.19091
G01 X-6.88941 Y14.15812
G01 X-6.91646 Y14.13282
G01 X-6.93203 Y14.11779
G01 X-6.94806 Y14.10280
G01 X-6.94806 Y14.10278
G01 X-6.96193 Y14.10212
G01 X-7.22190 Y14.10212
G01 X-7.26193 Y14.14215
G01 X-7.30226 Y14.18446
G01 X-7.30920 Y14.19211
G01 X-7.32896 Y14.21334
G01 X-7.34341 Y14.22843
G01 X-7.38735 Y14.27788
G01 X-7.39888 Y14.29193
G01 X-7.40986 Y14.30499
G01 X-7.44331 Y14.34392
G01 X-7.45222 Y14.35454
G01 X-7.47242 Y14.37915
G01 X-7.48987 Y14.40151
G01 X-7.50536 Y14.42241
G01 X-7.52093 Y14.44237
G01 X-7.52398 Y14.44611
G01 X-7.55250 Y14.48454
G01 X-7.56175 Y14.49836
G01 X-7.56906 Y14.50900
G01 X-7.58844 Y14.53635
G01 X-7.59586 Y14.54712
G01 X-7.61227 Y14.57169
G01 X-7.62632 Y14.59401
G01 X-7.63747 Y14.61286
G01 X-7.63886 Y14.61520
G01 X-7.65306 Y14.63887
G01 X-7.67834 Y14.68621
G01 X-7.69167 Y14.71446
G01 X-7.70394 Y14.74212
G01 X-7.82411 Y15.03221
G01 X-7.81613 Y15.06033
G01 X-7.81433 Y15.08073
G01 X-7.81110 Y15.15342
G01 X-7.81115 Y15.20407
G01 X-7.81085 Y15.22629
G01 X-7.81059 Y15.23536
G01 X-7.81113 Y15.29114
G01 X-7.81133 Y15.29518
G01 X-7.81217 Y15.32962
G01 X-7.81217 Y17.77264
G01 X-7.82096 Y17.88369
G01 X-7.83066 Y17.94488
G01 X-7.83447 Y17.96673
G01 X-7.90175 Y18.04684
G01 X-7.90843 Y18.05372
G01 X-7.91636 Y18.06203
G01 X-7.93061 Y18.07719
G01 X-7.94882 Y18.09733
G01 X-8.01981 Y18.17899
G01 X-8.04864 Y18.21826
G01 X-8.08491 Y18.27290
G01 X-8.08575 Y18.27622
G01 X-8.12505 Y18.43307
G01 X-8.13693 Y18.49271
G01 X-8.16020 Y18.64953
G01 X-8.16548 Y18.70307
G01 X-8.17320 Y18.85992
G01 X-8.17320 Y18.91135
G01 X-8.16548 Y19.06817
G01 X-8.16020 Y19.12169
G01 X-8.13693 Y19.27853
G01 X-8.12505 Y19.33822
G01 X-8.08575 Y19.49504
G01 X-8.08491 Y19.49837
G01 X-8.04867 Y19.55296
G01 X-8.01984 Y19.59225
G01 X-7.94885 Y19.67391
G01 X-7.90109 Y19.72364
G01 X-7.89162 Y19.73261
G01 X-7.79972 Y19.80607
G01 X-7.77927 Y19.82242
G01 X-7.74209 Y19.85019
G01 X-7.74049 Y19.85110
G01 X-7.71981 Y19.85661
G01 X-7.56299 Y19.89588
G01 X-7.50394 Y19.90767
G01 X-7.34707 Y19.93093
G01 X-7.29416 Y19.93617
G01 X-7.13737 Y19.94386
G01 X-7.08652 Y19.94386
G01 X-6.92967 Y19.93617
G01 X-6.87674 Y19.93093
G01 X-6.71992 Y19.90767
G01 X-6.66086 Y19.89588
G01 X-6.50404 Y19.85661
G01 X-6.48334 Y19.85110
G01 X-6.48179 Y19.85019
G01 X-6.44458 Y19.82242
G01 X-6.33216 Y19.73253
G01 X-6.32274 Y19.72367
G01 X-6.27501 Y19.67391
G01 X-6.20404 Y19.59227
G01 X-6.18951 Y19.57244
G01 X-6.17519 Y19.55293
G01 X-6.13727 Y19.49555
G01 X-6.10026 Y19.43312
G01 X-6.06340 Y19.35720
G01 X-6.03638 Y19.29380
G01 X-6.02358 Y19.25918
G01 X-5.99142 Y19.14356
G01 X-5.97623 Y19.07625
G01 X-5.97605 Y19.07518
G01 X-5.96198 Y18.92009
G01 X-5.95972 Y18.88562
G01 X-5.96198 Y18.85118
G01 X-5.97605 Y18.69606
G01 X-5.97623 Y18.69499
G01 X-5.99142 Y18.62768
G01 X-6.02360 Y18.51199
G01 X-6.03638 Y18.47744
G01 X-6.06338 Y18.41410
G01 X-6.10026 Y18.33815
G01 X-6.13724 Y18.27572
G01 X-6.17521 Y18.21826
G01 X-6.20397 Y18.17907
G01 X-6.27504 Y18.09733
G01 X-6.29216 Y18.07833
G01 X-6.32195 Y18.04663
G01 X-6.36813 Y17.99238
G01 X-6.38829 Y17.96624
G01 X-6.39462 Y17.93724
G01 X-6.41105 Y17.80432
G01 X-6.41138 Y17.79284
G01 X-6.41169 Y17.77264
G01 X-6.41169 Y15.32962
G01 X-6.41253 Y15.29518
G01 X-6.41420 Y15.26089
G01 X-6.41926 Y15.22690
G01 X-6.43267 Y15.15947
G01 X-6.44669 Y15.10343
G01 X-6.44948 Y15.09287
G01 X-6.45563 Y15.06879
G01 X-6.45726 Y15.01367
G01 X-6.45726 Y15.01232
G01 X-6.45720 Y15.00907
G01 X-6.45667 Y14.95236
G01 X-6.42352 Y14.74212
G01 X-6.41692 Y14.72045
G01 X-6.41174 Y14.70288
G01 X-6.40318 Y14.67250
G01 X-6.39901 Y14.65723
G01 X-6.38959 Y14.62147
G01 X-6.38334 Y14.61908
G01 X-6.35271 Y14.60791
G01 X-6.31194 Y14.59386
G01 X-6.17468 Y14.55970
G01 X-6.11532 Y14.55060
G01 X-6.01194 Y14.54237
G01 X-6.00793 Y14.54237
G01 X-5.97765 Y14.54154
G01 X-5.95093 Y14.54024
G01 X-5.94829 Y14.53978
G01 X-5.88093 Y14.52472
G01 X-5.85258 Y14.51690
G01 X-5.83894 Y14.51299
G01 X-5.78924 Y14.48980
G01 X-5.76310 Y14.47633
G01 X-5.74171 Y14.46483
G01 X-5.70630 Y14.43790
G01 X-5.68347 Y14.41936
G01 X-5.65716 Y14.39688
G01 X-5.63470 Y14.37059
G01 X-5.61616 Y14.34776
G01 X-5.58919 Y14.31230
G01 X-5.57773 Y14.29096
G01 X-5.56427 Y14.26483
G01 X-5.54105 Y14.21509
G01 X-5.53717 Y14.20148
G01 X-5.52934 Y14.17313
G01 X-5.51433 Y14.10608
G01 X-5.51385 Y14.10323
G01 X-5.51253 Y14.07672
G01 X-5.51169 Y14.04212
G01 X-5.51169 Y13.80400
G01 X-5.50826 Y13.73491
G01 X-5.50636 Y13.71538
G01 X-5.50130 Y13.69691
G01 X-5.49985 Y13.69132
G01 X-5.49404 Y13.67029
G01 X-5.48266 Y13.62482
G01 X-5.46925 Y13.55736
G01 X-5.46419 Y13.52335
G01 X-5.46252 Y13.48906
G01 X-5.46165 Y13.45462
G01 X-5.46165 Y12.95005
G01 X-5.45289 Y12.83918
G01 X-5.44321 Y12.77799
G01 X-5.35883 Y12.52533
G01 X-5.32764 Y12.46412
G01 X-5.32185 Y12.45416
G01 X-5.24232 Y12.40827
G01 X-5.15685 Y12.38050
G01 X-5.13907 Y12.38571
G01 X-5.04303 Y12.41390
G01 X-4.98182 Y12.43923
G01 X-4.79340 Y12.54842
G01 X-4.75685 Y12.57723
G01 X-4.69475 Y12.63240
G01 X-2.60776 Y14.71939
G01 X-2.53552 Y14.80404
G01 X-2.49910 Y14.85418
G01 X-2.49559 Y14.85904
G01 X-2.47730 Y14.99401
G01 X-2.47669 Y15.00956
G01 X-2.47616 Y15.03709
G01 X-2.47616 Y35.68719
G01 X-2.48495 Y35.79821
G01 X-2.49465 Y35.85940
G01 X-2.57901 Y36.11193
G01 X-2.61020 Y36.17314
G01 X-2.61591 Y36.18295
G01 X-2.61591 Y36.43438
G01 X-2.33242 Y37.11883
G01 X-2.32475 Y37.13870
G01 X-2.30019 Y37.20730
G01 X-2.29011 Y37.24050
G01 X-2.27291 Y37.30911
G01 X-2.26727 Y37.33735
G01 X-2.25711 Y37.40596
G01 X-2.25460 Y37.43141
G01 X-2.25122 Y37.50001
G01 X-2.25091 Y37.51231
G01 X-2.25091 Y43.89527
G01 X-2.25122 Y43.90757
G01 X-2.25460 Y43.97620
G01 X-2.25711 Y44.00167
G01 X-2.26727 Y44.07028
G01 X-2.27291 Y44.09852
G01 X-2.29011 Y44.16713
G01 X-2.30019 Y44.20033
G01 X-2.32475 Y44.26893
G01 X-2.33242 Y44.28880
G01 X-2.39862 Y44.44866
G01 X-2.41073 Y44.47597
G01 X-2.44319 Y44.54460
G01 X-2.47837 Y44.61021
G01 X-2.51949 Y44.67881
G01 X-2.57474 Y44.76119
G01 X-2.61589 Y44.81668
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.08342 Y42.84501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.08342 Y42.84501
G01 X-5.09693 Y42.85220
G01 X-5.09851 Y42.85504
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.09912 Y42.84239 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.09912 Y42.84239
G01 X-5.09851 Y42.85509
G01 X-5.11796 Y42.89040
G01 X-5.14021 Y42.92880
G01 X-5.16567 Y42.97559
G01 X-5.17212 Y42.98832
G01 X-5.25876 Y43.12482
G01 X-5.28723 Y43.16091
G01 X-5.29399 Y43.16960
G01 X-5.30229 Y43.18131
G01 X-5.32810 Y43.21534
G01 X-5.40392 Y43.31349
G01 X-5.44334 Y43.37008
G01 X-5.45004 Y43.38075
G01 X-5.52132 Y43.51732
G01 X-5.53653 Y43.54831
G01 X-5.54768 Y43.58100
G01 X-5.59383 Y43.72794
G01 X-5.59665 Y43.74028
G01 X-5.60877 Y43.80810
G01 X-5.62238 Y43.91415
G01 X-5.62533 Y43.97391
G01 X-5.62533 Y44.04272
G01 X-5.62238 Y44.10251
G01 X-5.60877 Y44.20853
G01 X-5.59665 Y44.27638
G01 X-5.59383 Y44.28872
G01 X-5.54768 Y44.43566
G01 X-5.53653 Y44.46835
G01 X-5.52129 Y44.49934
G01 X-5.47593 Y44.58626
G01 X-5.45002 Y44.63591
G01 X-5.44334 Y44.64658
G01 X-5.41179 Y44.69276
G01 X-5.40392 Y44.70315
G01 X-5.33854 Y44.78775
G01 X-5.29836 Y44.83210
G01 X-5.24971 Y44.88074
G01 X-5.18748 Y44.93716
G01 X-5.12917 Y44.99652
G01 X-5.10846 Y45.02016
G01 X-5.07852 Y45.05245
G01 X-5.06473 Y45.06652
G01 X-4.96353 Y45.19083
G01 X-4.92327 Y45.24993
G01 X-4.92307 Y45.25024
G01 X-4.90356 Y45.25831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-4.92327 Y45.24993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-4.92327 Y45.24993
G01 X-4.92416 Y45.26741
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.13828 Y47.63913 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.13828 Y47.63913
G01 X-5.14956 Y47.69224
G01 X-5.16846 Y47.75044
G01 X-5.21100 Y47.84553
G01 X-5.23620 Y47.87987
G01 X-5.23861 Y47.88437
G01 X-5.24720 Y47.89483
G01 X-5.26826 Y47.92349
G01 X-5.27265 Y47.92948
G01 X-5.28439 Y47.94233
G01 X-5.28543 Y47.94139
G01 X-5.29955 Y47.95864
G01 X-5.45063 Y48.10969
G01 X-5.49561 Y48.16832
G01 X-5.46475 Y48.16832
G01 X-5.40575 Y48.09641
G01 X-5.33783 Y48.02849
G01 X-5.20902 Y47.92280
G01 X-5.12917 Y47.86943
G01 X-4.98220 Y47.79087
G01 X-4.90356 Y47.75831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.14093 Y50.13933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.14093 Y50.13933
G01 X-5.14093 Y50.16590
G01 X-5.18314 Y50.14154
G01 X-5.32457 Y50.03301
G01 X-5.45063 Y49.90697
G01 X-5.49561 Y49.84832
G01 X-5.46475 Y49.84832
G01 X-5.40575 Y49.92020
G01 X-5.33783 Y49.98812
G01 X-5.20902 Y50.09384
G01 X-5.14093 Y50.13933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.25292 Y48.03959 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.25292 Y48.03959
G01 X-3.25292 Y47.47700
G01 X-3.26404 Y47.48813
G01 X-3.39285 Y47.59384
G01 X-3.47273 Y47.64721
G01 X-3.61967 Y47.72575
G01 X-3.69826 Y47.75831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.69826 Y45.25831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.69826 Y45.25831
G01 X-3.61967 Y45.22575
G01 X-3.47273 Y45.14721
G01 X-3.39285 Y45.09385
G01 X-3.26404 Y44.98813
G01 X-3.19612 Y44.92021
G01 X-3.13712 Y44.84831
G01 X-2.83897 Y44.84831
G01 X-2.79094 Y44.84595
G01 X-2.72264 Y44.83924
G01 X-2.62843 Y44.82049
G01 X-2.61589 Y44.81668
G01 X-2.61591 Y45.47637
G01 X-2.80789 Y45.66835
G01 X-3.13709 Y45.66835
G01 X-3.19612 Y45.59641
G01 X-3.26404 Y45.52849
G01 X-3.39285 Y45.42278
G01 X-3.47273 Y45.36941
G01 X-3.61967 Y45.29088
G01 X-3.69826 Y45.25831
G01 X-4.90356 Y45.25831
G01 X-4.92358 Y45.26659
G01 X-4.92416 Y45.26741
G01 X-4.92419 Y45.26743
G01 X-4.95848 Y45.31452
G01 X-4.96483 Y45.32336
G01 X-4.99815 Y45.37018
G01 X-5.07730 Y45.46647
G01 X-5.12886 Y45.52052
G01 X-5.14707 Y45.53985
G01 X-5.18751 Y45.57952
G01 X-5.24971 Y45.63591
G01 X-5.29836 Y45.68455
G01 X-5.33854 Y45.72887
G01 X-5.40392 Y45.81348
G01 X-5.44334 Y45.87007
G01 X-5.45004 Y45.88077
G01 X-5.52129 Y46.01732
G01 X-5.53653 Y46.04831
G01 X-5.54768 Y46.08099
G01 X-5.59383 Y46.22793
G01 X-5.59665 Y46.24028
G01 X-5.60877 Y46.30812
G01 X-5.62238 Y46.41414
G01 X-5.62533 Y46.47393
G01 X-5.62533 Y46.54274
G01 X-5.62238 Y46.60251
G01 X-5.60877 Y46.70855
G01 X-5.59665 Y46.77637
G01 X-5.59381 Y46.78877
G01 X-5.54768 Y46.93565
G01 X-5.53653 Y46.96834
G01 X-5.52129 Y46.99933
G01 X-5.45002 Y47.13591
G01 X-5.44334 Y47.14658
G01 X-5.40392 Y47.20312
G01 X-5.36188 Y47.25755
G01 X-5.34842 Y47.27497
G01 X-5.30516 Y47.33766
G01 X-5.28566 Y47.36941
G01 X-5.26567 Y47.40027
G01 X-5.25058 Y47.42234
G01 X-5.17671 Y47.55453
G01 X-5.13828 Y47.63913
G01 X-5.13701 Y47.64195
G01 X-5.12917 Y47.64721
G01 X-4.98220 Y47.72575
G01 X-4.90356 Y47.75831
G01 X-3.69826 Y47.75831
G01 X-3.61967 Y47.79087
G01 X-3.47273 Y47.86943
G01 X-3.39285 Y47.92280
G01 X-3.26404 Y48.02849
G01 X-3.25292 Y48.03959
G01 X-3.22086 Y48.11680
G01 X-3.16125 Y48.28343
G01 X-3.13821 Y48.35915
G01 X-3.09648 Y48.52577
G01 X-3.08368 Y48.58993
G01 X-3.05896 Y48.75658
G01 X-3.05330 Y48.81403
G01 X-3.04510 Y48.98068
G01 X-3.04510 Y49.03601
G01 X-3.05330 Y49.20260
G01 X-3.05896 Y49.26006
G01 X-3.08368 Y49.42671
G01 X-3.09645 Y49.49084
G01 X-3.13821 Y49.65749
G01 X-3.16125 Y49.73324
G01 X-3.22086 Y49.89986
G01 X-3.25289 Y49.97697
G01 X-3.26404 Y49.98812
G01 X-3.39285 Y50.09384
G01 X-3.46092 Y50.13933
G01 X-3.46092 Y50.28632
G01 X-3.40014 Y50.29595
G01 X-3.30448 Y50.33268
G01 X-3.25716 Y50.36341
G01 X-3.25292 Y50.37032
G01 X-3.25289 Y49.97697
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.25292 Y50.37032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.25292 Y50.37032
G01 X-3.23184 Y50.40486
G01 X-3.20265 Y50.46603
G01 X-3.12869 Y50.70387
G01 X-3.12053 Y50.76011
G01 X-3.11317 Y50.86168
G01 X-3.11317 Y54.24283
G01 X-3.12196 Y54.35385
G01 X-3.13166 Y54.41504
G01 X-3.21553 Y54.66663
G01 X-3.21657 Y54.66663
G01 X-3.28932 Y54.67056
G01 X-3.46793 Y54.68677
G01 X-3.47626 Y54.68745
G01 X-3.50725 Y54.68989
G01 X-3.56244 Y54.69208
G01 X-5.06793 Y54.69208
G01 X-5.10857 Y54.69325
G01 X-5.12607 Y54.69530
G01 X-5.21220 Y54.72177
G01 X-5.28472 Y54.76561
G01 X-5.34466 Y54.82558
G01 X-5.35162 Y54.83584
G01 X-5.41387 Y54.92952
G01 X-5.44722 Y54.98448
G01 X-5.47918 Y55.04232
G01 X-5.55794 Y55.15433
G01 X-5.55794 Y55.53221
G01 X-5.55789 Y55.53246
G01 X-5.55789 Y55.53251
G01 X-5.55611 Y55.54448
G01 X-5.54674 Y55.63932
G01 X-5.53905 Y55.79616
G01 X-5.53905 Y55.88849
G01 X-5.54212 Y55.95095
G01 X-5.58497 Y56.04155
G01 X-5.62622 Y56.11887
G01 X-5.70935 Y56.25756
G01 X-5.75020 Y56.31877
G01 X-5.84463 Y56.44610
G01 X-5.88647 Y56.49708
G01 X-5.99193 Y56.61344
G01 X-6.03681 Y56.65832
G01 X-6.15317 Y56.76378
G01 X-6.20414 Y56.80561
G01 X-6.33150 Y56.90005
G01 X-6.39269 Y56.94089
G01 X-6.53137 Y57.02403
G01 X-6.60869 Y57.06528
G01 X-6.74163 Y57.12817
G01 X-7.69619 Y58.08265
G01 X-7.87549 Y58.08265
G01 X-7.90549 Y58.04610
G01 X-7.97341 Y57.97818
G01 X-8.09462 Y57.87869
G01 X-8.17450 Y57.82532
G01 X-8.31280 Y57.75138
G01 X-8.40155 Y57.71463
G01 X-8.55164 Y57.66911
G01 X-8.64585 Y57.65036
G01 X-8.80190 Y57.63500
G01 X-8.89797 Y57.63500
G01 X-9.05405 Y57.65036
G01 X-9.14826 Y57.66911
G01 X-9.17973 Y57.67866
G01 X-9.29832 Y57.71463
G01 X-9.38707 Y57.75138
G01 X-9.52537 Y57.82532
G01 X-9.60526 Y57.87869
G01 X-9.72646 Y57.97818
G01 X-9.79441 Y58.04610
G01 X-9.89388 Y58.16733
G01 X-9.94727 Y58.24719
G01 X-10.02118 Y58.38549
G01 X-10.05793 Y58.47424
G01 X-10.10348 Y58.62433
G01 X-10.12220 Y58.71854
G01 X-10.13759 Y58.87459
G01 X-10.13759 Y58.97066
G01 X-10.13294 Y59.01772
G01 X-12.87987 Y61.76466
G01 X-13.93796 Y61.76466
G01 X-14.62242 Y62.04815
G01 X-14.64228 Y62.05582
G01 X-14.71088 Y62.08038
G01 X-14.74408 Y62.09046
G01 X-14.81269 Y62.10766
G01 X-14.84093 Y62.11330
G01 X-14.90954 Y62.12346
G01 X-14.93501 Y62.12597
G01 X-15.00364 Y62.12935
G01 X-15.01594 Y62.12965
G01 X-20.05784 Y62.12965
G01 X-20.07013 Y62.12996
G01 X-20.13874 Y62.13334
G01 X-20.16419 Y62.13585
G01 X-20.23279 Y62.14601
G01 X-20.24676 Y62.14845
G01 X-20.25840 Y62.15663
G01 X-20.31410 Y62.19793
G01 X-20.33391 Y62.21419
G01 X-20.38481 Y62.26031
G01 X-20.39370 Y62.26877
G01 X-21.25380 Y63.12887
G01 X-21.26226 Y63.13776
G01 X-21.30838 Y63.18866
G01 X-21.32464 Y63.20847
G01 X-21.36594 Y63.26417
G01 X-21.37412 Y63.27580
G01 X-21.37656 Y63.28977
G01 X-21.38672 Y63.35838
G01 X-21.38923 Y63.38383
G01 X-21.39261 Y63.45244
G01 X-21.39291 Y63.46473
G01 X-21.39291 Y64.62452
G01 X-21.39261 Y64.63681
G01 X-21.38923 Y64.70544
G01 X-21.38672 Y64.73092
G01 X-21.37656 Y64.79953
G01 X-21.37412 Y64.81352
G01 X-21.36594 Y64.82513
G01 X-21.32464 Y64.88083
G01 X-21.30838 Y64.90064
G01 X-21.26226 Y64.95154
G01 X-21.25380 Y64.96043
G01 X-17.61101 Y68.60323
G01 X-17.60209 Y68.61168
G01 X-17.55121 Y68.65781
G01 X-17.53140 Y68.67407
G01 X-17.47570 Y68.71537
G01 X-17.46409 Y68.72355
G01 X-17.45010 Y68.72598
G01 X-17.38149 Y68.73614
G01 X-17.35604 Y68.73866
G01 X-17.28743 Y68.74204
G01 X-17.27514 Y68.74234
G01 X-16.23293 Y68.74234
G01 X-16.22061 Y68.74265
G01 X-16.15200 Y68.74602
G01 X-16.12650 Y68.74854
G01 X-16.05792 Y68.75870
G01 X-16.02968 Y68.76434
G01 X-15.96107 Y68.78153
G01 X-15.92787 Y68.79162
G01 X-15.85924 Y68.81618
G01 X-15.83938 Y68.82385
G01 X-15.15498 Y69.10734
G01 X-14.98096 Y69.28136
G01 X-14.94865 Y69.31699
G01 X-14.90514 Y69.37003
G01 X-14.85178 Y69.44988
G01 X-14.81942 Y69.51039
G01 X-14.81660 Y69.51727
G01 X-14.79186 Y69.53378
G01 X-14.76938 Y69.55222
G01 X-14.66306 Y69.63949
G01 X-14.59511 Y69.70741
G01 X-14.48942 Y69.83622
G01 X-14.43606 Y69.91610
G01 X-14.35749 Y70.06304
G01 X-14.32074 Y70.15179
G01 X-14.30492 Y70.20383
G01 X-14.30492 Y71.03469
G01 X-14.28914 Y71.08684
G01 X-14.25239 Y71.17559
G01 X-14.17383 Y71.32252
G01 X-14.12046 Y71.40241
G01 X-14.01475 Y71.53121
G01 X-13.94683 Y71.59913
G01 X-13.87492 Y71.65813
G01 X-13.87492 Y72.51091
G01 X-13.91345 Y72.52262
G01 X-13.99816 Y72.56789
G01 X-14.07243 Y72.62882
G01 X-14.13336 Y72.70309
G01 X-14.13888 Y72.71343
G01 X-14.17863 Y72.78780
G01 X-14.20652 Y72.87972
G01 X-14.21594 Y72.97530
G01 X-14.21594 Y73.46537
G01 X-14.21414 Y73.47759
G01 X-14.20479 Y73.57225
G01 X-14.19707 Y73.72907
G01 X-14.19592 Y73.77533
G01 X-14.19592 Y74.57532
G01 X-14.19707 Y74.62158
G01 X-14.20479 Y74.77840
G01 X-14.21414 Y74.87306
G01 X-14.21594 Y74.88523
G01 X-14.21594 Y75.24134
G01 X-14.12709 Y75.37532
G01 X-14.10702 Y75.41551
G01 X-14.07959 Y75.46577
G01 X-14.02839 Y75.55198
G01 X-14.00263 Y75.59216
G01 X-13.94276 Y75.65203
G01 X-13.92536 Y75.66366
G01 X-13.87019 Y75.69590
G01 X-13.78409 Y75.72236
G01 X-13.76664 Y75.72440
G01 X-13.72595 Y75.72556
G01 X-12.12593 Y75.72556
G01 X-12.08521 Y75.72440
G01 X-12.06776 Y75.72236
G01 X-11.98165 Y75.69590
G01 X-11.90911 Y75.65203
G01 X-11.84919 Y75.59214
G01 X-11.80637 Y75.52153
G01 X-11.75194 Y75.41860
G01 X-11.73065 Y75.37532
G01 X-11.72298 Y75.35853
G01 X-11.63593 Y75.23207
G01 X-11.61348 Y75.19943
G01 X-11.60134 Y75.19432
G01 X-11.50065 Y75.17504
G01 X-11.43969 Y75.16989
G01 X-11.33736 Y75.17197
G01 X-11.23766 Y75.19526
G01 X-11.14498 Y75.23875
G01 X-11.09260 Y75.27040
G01 X-11.05707 Y75.29735
G01 X-11.05659 Y75.29884
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.63593 Y75.23207 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.63593 Y75.23207
G01 X-11.63593 Y72.97530
G01 X-11.64536 Y72.87972
G01 X-11.67325 Y72.78780
G01 X-11.71851 Y72.70309
G01 X-11.77944 Y72.62882
G01 X-11.85371 Y72.56789
G01 X-11.93842 Y72.52262
G01 X-12.03035 Y72.49473
G01 X-12.12593 Y72.48531
G01 X-12.19494 Y72.48531
G01 X-12.19494 Y71.65813
G01 X-12.12306 Y71.59913
G01 X-12.05511 Y71.53121
G01 X-11.94942 Y71.40241
G01 X-11.89606 Y71.32252
G01 X-11.81749 Y71.17559
G01 X-11.78074 Y71.08684
G01 X-11.73238 Y70.92738
G01 X-11.71363 Y70.83317
G01 X-11.69730 Y70.66733
G01 X-11.69730 Y70.57129
G01 X-11.71363 Y70.40546
G01 X-11.73238 Y70.31125
G01 X-11.78074 Y70.15179
G01 X-11.81749 Y70.06304
G01 X-11.89606 Y69.91610
G01 X-11.94942 Y69.83622
G01 X-12.05511 Y69.70741
G01 X-12.12306 Y69.63949
G01 X-12.19494 Y69.58049
G01 X-12.19494 Y69.24031
G01 X-12.19730 Y69.19230
G01 X-12.20401 Y69.12400
G01 X-12.22275 Y69.02979
G01 X-12.24266 Y68.96413
G01 X-12.27942 Y68.87539
G01 X-12.31178 Y68.81488
G01 X-12.36514 Y68.73503
G01 X-12.40865 Y68.68199
G01 X-12.44096 Y68.64635
G01 X-12.92999 Y68.15733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.69986 Y66.47732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.69986 Y66.47732
G01 X-16.51500 Y66.47732
G01 X-18.36894 Y64.62338
G01 X-18.34669 Y64.58177
G01 X-18.30994 Y64.49302
G01 X-18.26442 Y64.34293
G01 X-18.24568 Y64.24873
G01 X-18.23031 Y64.09267
G01 X-18.23031 Y63.99661
G01 X-18.24568 Y63.84052
G01 X-18.24778 Y63.82985
G01 X-18.26442 Y63.74631
G01 X-18.30994 Y63.59625
G01 X-18.34669 Y63.50750
G01 X-18.38030 Y63.44464
G01 X-18.46584 Y63.39336
G01 X-18.54748 Y63.34959
G01 X-18.70430 Y63.27545
G01 X-18.76465 Y63.25038
G01 X-18.92147 Y63.19427
G01 X-18.96704 Y63.18040
G01 X-19.12388 Y63.14111
G01 X-19.15974 Y63.13395
G01 X-19.31654 Y63.11070
G01 X-19.34684 Y63.10771
G01 X-19.50369 Y63.10001
G01 X-19.53216 Y63.10001
G01 X-19.68900 Y63.10771
G01 X-19.71931 Y63.11070
G01 X-19.84074 Y63.12871
G01 X-19.87201 Y63.14746
G01 X-19.89896 Y63.16544
G01 X-20.02632 Y63.25988
G01 X-20.04674 Y63.27667
G01 X-20.16310 Y63.38210
G01 X-20.18044 Y63.39948
G01 X-20.28590 Y63.51578
G01 X-20.30267 Y63.53626
G01 X-20.39713 Y63.66361
G01 X-20.40633 Y63.67667
G01 X-20.40904 Y63.69239
G01 X-20.43231 Y63.84921
G01 X-20.43490 Y63.87552
G01 X-20.44262 Y64.03237
G01 X-20.44262 Y64.05693
G01 X-20.43490 Y64.21375
G01 X-20.43231 Y64.24006
G01 X-20.40904 Y64.39691
G01 X-20.40633 Y64.41263
G01 X-20.39713 Y64.42569
G01 X-20.30269 Y64.55304
G01 X-20.28590 Y64.57346
G01 X-20.18047 Y64.68982
G01 X-20.16310 Y64.70720
G01 X-20.04674 Y64.81263
G01 X-20.02629 Y64.82942
G01 X-19.96589 Y64.87423
G01 X-19.93058 Y64.92180
G01 X-19.91352 Y64.94263
G01 X-19.86736 Y64.99353
G01 X-19.85847 Y65.00288
G01 X-17.20349 Y67.65786
G01 X-17.19412 Y67.66678
G01 X-17.14321 Y67.71293
G01 X-17.12239 Y67.73000
G01 X-17.06897 Y67.76962
G01 X-17.06615 Y67.77033
G01 X-17.03791 Y67.77597
G01 X-16.96930 Y67.78613
G01 X-16.94382 Y67.78865
G01 X-16.87524 Y67.79203
G01 X-16.86295 Y67.79233
G01 X-14.00794 Y67.79233
G01 X-13.99565 Y67.79264
G01 X-13.92701 Y67.79601
G01 X-13.90154 Y67.79853
G01 X-13.83293 Y67.80869
G01 X-13.80469 Y67.81433
G01 X-13.73608 Y67.83152
G01 X-13.70289 Y67.84161
G01 X-13.63428 Y67.86617
G01 X-13.61442 Y67.87384
G01 X-12.92999 Y68.15733
G01 X-11.74988 Y68.15730
G01 X-10.66342 Y69.24376
G01 X-10.66342 Y69.29825
G01 X-10.71902 Y69.30373
G01 X-10.81094 Y69.33162
G01 X-10.89568 Y69.37688
G01 X-10.96992 Y69.43782
G01 X-11.03086 Y69.51209
G01 X-11.07614 Y69.59680
G01 X-11.10403 Y69.68872
G01 X-11.11343 Y69.78430
G01 X-11.11343 Y71.38432
G01 X-11.10403 Y71.47990
G01 X-11.07614 Y71.57183
G01 X-11.03086 Y71.65653
G01 X-10.96992 Y71.73080
G01 X-10.89568 Y71.79174
G01 X-10.88529 Y71.79728
G01 X-10.81094 Y71.83700
G01 X-10.71902 Y71.86489
G01 X-10.62344 Y71.87431
G01 X-10.13322 Y71.87431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.52565 Y71.87254 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.52565 Y71.87254
G01 X-9.51351 Y71.87431
G01 X-9.51336 Y71.87434
G01 X-9.37506 Y71.91630
G01 X-9.28631 Y71.95308
G01 X-9.14800 Y72.02699
G01 X-9.06812 Y72.08036
G01 X-8.94689 Y72.17985
G01 X-8.87897 Y72.24777
G01 X-8.84897 Y72.28435
G01 X-8.41288 Y72.28435
G01 X-7.53792 Y71.40939
G01 X-7.53792 Y69.10957
G01 X-9.44518 Y67.20231
G01 X-10.32898 Y67.20234
G01 X-11.00634 Y66.92175
G01 X-11.02649 Y66.91397
G01 X-11.09512 Y66.88944
G01 X-11.12885 Y66.87918
G01 X-11.19743 Y66.86198
G01 X-11.22621 Y66.85624
G01 X-11.29481 Y66.84608
G01 X-11.32077 Y66.84351
G01 X-11.38940 Y66.84014
G01 X-11.40195 Y66.83983
G01 X-13.62691 Y66.83983
G01 X-13.63946 Y66.83953
G01 X-13.70807 Y66.83615
G01 X-13.73403 Y66.83358
G01 X-13.80263 Y66.82342
G01 X-13.83141 Y66.81768
G01 X-13.89999 Y66.80049
G01 X-13.93372 Y66.79022
G01 X-14.00235 Y66.76569
G01 X-14.02247 Y66.75792
G01 X-14.69986 Y66.47732
G01 X-15.15256 Y66.02462
G01 X-15.88749 Y65.28967
G01 X-15.91388 Y65.29226
G01 X-16.00997 Y65.29226
G01 X-16.16605 Y65.27689
G01 X-16.26023 Y65.25815
G01 X-16.41032 Y65.21263
G01 X-16.49907 Y65.17588
G01 X-16.63737 Y65.10194
G01 X-16.71723 Y65.04857
G01 X-16.83844 Y64.94908
G01 X-16.90638 Y64.88116
G01 X-17.00588 Y64.75993
G01 X-17.05927 Y64.68007
G01 X-17.13318 Y64.54177
G01 X-17.16993 Y64.45302
G01 X-17.21545 Y64.30293
G01 X-17.23417 Y64.20872
G01 X-17.24959 Y64.05266
G01 X-17.24959 Y63.95660
G01 X-17.23417 Y63.80052
G01 X-17.21545 Y63.70631
G01 X-17.16993 Y63.55625
G01 X-17.13318 Y63.46750
G01 X-17.12094 Y63.44464
G01 X-16.98998 Y63.36618
G01 X-16.91350 Y63.32516
G01 X-16.75668 Y63.25099
G01 X-16.70090 Y63.22780
G01 X-16.54405 Y63.17169
G01 X-16.50278 Y63.15914
G01 X-16.34593 Y63.11985
G01 X-16.31418 Y63.11352
G01 X-16.15734 Y63.09026
G01 X-16.13102 Y63.08767
G01 X-15.97420 Y63.07994
G01 X-15.94962 Y63.07994
G01 X-15.79280 Y63.08767
G01 X-15.76648 Y63.09026
G01 X-15.60964 Y63.11352
G01 X-15.57789 Y63.11985
G01 X-15.42104 Y63.15914
G01 X-15.37979 Y63.17169
G01 X-15.22295 Y63.22780
G01 X-15.16717 Y63.25099
G01 X-15.01035 Y63.32516
G01 X-14.93385 Y63.36618
G01 X-14.80291 Y63.44464
G01 X-13.54355 Y63.44464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.93796 Y61.76466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.93796 Y61.76466
G01 X-12.50098 Y60.32763
G01 X-12.45397 Y60.33227
G01 X-12.35790 Y60.33227
G01 X-12.20185 Y60.31691
G01 X-12.10764 Y60.29816
G01 X-11.95755 Y60.25262
G01 X-11.86880 Y60.21587
G01 X-11.73050 Y60.14195
G01 X-11.65062 Y60.08859
G01 X-11.52941 Y59.98910
G01 X-11.46149 Y59.92118
G01 X-11.36200 Y59.79994
G01 X-11.30863 Y59.72006
G01 X-11.23469 Y59.58176
G01 X-11.19794 Y59.49301
G01 X-11.15242 Y59.34294
G01 X-11.13368 Y59.24874
G01 X-11.11831 Y59.09265
G01 X-11.11831 Y58.99659
G01 X-11.12293 Y58.94957
G01 X-10.51414 Y58.34081
G01 X-9.30327 Y57.12994
G01 X-9.29990 Y57.12994
G01 X-9.14384 Y57.11458
G01 X-9.04963 Y57.09583
G01 X-8.89954 Y57.05032
G01 X-8.81079 Y57.01356
G01 X-8.67249 Y56.93962
G01 X-8.59263 Y56.88626
G01 X-8.47140 Y56.78676
G01 X-8.40348 Y56.71885
G01 X-8.32291 Y56.62067
G01 X-8.30399 Y56.59761
G01 X-8.25062 Y56.51775
G01 X-8.17668 Y56.37945
G01 X-8.13993 Y56.29070
G01 X-8.09441 Y56.14061
G01 X-8.07793 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.07793 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.07793 Y55.62670
G01 X-8.06147 Y55.54399
G01 X-8.01595 Y55.39393
G01 X-7.97917 Y55.30518
G01 X-7.90526 Y55.16688
G01 X-7.88286 Y55.13335
G01 X-8.86827 Y54.14793
G01 X-9.20988 Y53.80630
G01 X-11.14795 Y53.80630
G01 X-11.19596 Y53.80394
G01 X-11.23131 Y53.80046
G01 X-11.26294 Y53.78357
G01 X-11.27691 Y53.77595
G01 X-11.31879 Y53.75273
G01 X-11.34587 Y53.73711
G01 X-11.40655 Y53.70074
G01 X-11.47658 Y53.65400
G01 X-11.53228 Y53.61270
G01 X-11.59311 Y53.56279
G01 X-11.64401 Y53.51667
G01 X-11.67180 Y53.49020
G01 X-12.83578 Y52.32622
G01 X-12.86225 Y52.29843
G01 X-12.90837 Y52.24753
G01 X-12.95828 Y52.18670
G01 X-12.99958 Y52.13100
G01 X-13.04632 Y52.06097
G01 X-13.08269 Y52.00029
G01 X-13.12707 Y51.91713
G01 X-13.14716 Y51.87463
G01 X-13.14955 Y51.85035
G01 X-13.15191 Y51.80232
G01 X-13.15191 Y51.18733
G01 X-13.23860 Y51.15142
G01 X-13.28180 Y51.12833
G01 X-13.36169 Y51.07497
G01 X-13.39956 Y51.04388
G01 X-13.46748 Y50.97593
G01 X-13.49857 Y50.93806
G01 X-13.55196 Y50.85820
G01 X-13.57505 Y50.81497
G01 X-13.61180 Y50.72622
G01 X-13.62602 Y50.67933
G01 X-13.64477 Y50.58513
G01 X-13.64863 Y50.54583
G01 X-13.64667 Y50.53600
G01 X-13.63596 Y50.48830
G01 X-13.62143 Y50.43026
G01 X-13.60377 Y50.34184
G01 X-13.57906 Y50.17522
G01 X-13.57108 Y50.09425
G01 X-13.56291 Y49.92762
G01 X-13.56192 Y49.88830
G01 X-13.56192 Y49.63834
G01 X-13.56291 Y49.59902
G01 X-13.57108 Y49.43240
G01 X-13.57909 Y49.35140
G01 X-13.60377 Y49.18480
G01 X-13.62140 Y49.09643
G01 X-13.63596 Y49.03834
G01 X-13.64667 Y48.99062
G01 X-13.64863 Y48.98074
G01 X-13.64477 Y48.94152
G01 X-13.62602 Y48.84731
G01 X-13.61180 Y48.80040
G01 X-13.57505 Y48.71165
G01 X-13.55196 Y48.66844
G01 X-13.49857 Y48.58856
G01 X-13.47068 Y48.55457
G01 X-13.46748 Y48.55069
G01 X-13.39956 Y48.48277
G01 X-13.36169 Y48.45168
G01 X-13.28180 Y48.39831
G01 X-13.23860 Y48.37520
G01 X-13.15191 Y48.33931
G01 X-13.15191 Y48.03431
G01 X-13.14955 Y47.98630
G01 X-13.14284 Y47.91800
G01 X-13.12410 Y47.82379
G01 X-13.10418 Y47.75813
G01 X-13.06743 Y47.66938
G01 X-13.03507 Y47.60888
G01 X-12.98170 Y47.52902
G01 X-12.93819 Y47.47599
G01 X-12.90588 Y47.44035
G01 X-10.92377 Y45.45824
G01 X-10.94754 Y45.45590
G01 X-11.03944 Y45.42801
G01 X-11.12418 Y45.38272
G01 X-11.19842 Y45.32179
G01 X-11.25935 Y45.24754
G01 X-11.30464 Y45.16284
G01 X-11.33253 Y45.07091
G01 X-11.34193 Y44.97531
G01 X-11.34193 Y43.37531
G01 X-11.33253 Y43.27973
G01 X-11.30464 Y43.18781
G01 X-11.25935 Y43.10307
G01 X-11.19842 Y43.02883
G01 X-11.12418 Y42.96789
G01 X-11.03944 Y42.92261
G01 X-10.94754 Y42.89472
G01 X-10.85194 Y42.88532
G01 X-10.49192 Y42.88532
G01 X-10.49192 Y42.84587
G01 X-10.50033 Y42.84331
G01 X-10.58907 Y42.80655
G01 X-10.72738 Y42.73264
G01 X-10.80723 Y42.67927
G01 X-10.92847 Y42.57978
G01 X-10.99639 Y42.51186
G01 X-11.09588 Y42.39063
G01 X-11.14925 Y42.31075
G01 X-11.22318 Y42.17244
G01 X-11.25994 Y42.08370
G01 X-11.30546 Y41.93363
G01 X-11.32420 Y41.83942
G01 X-11.33957 Y41.68334
G01 X-11.33957 Y41.58728
G01 X-11.32420 Y41.43122
G01 X-11.30546 Y41.33701
G01 X-11.25994 Y41.18692
G01 X-11.22318 Y41.09818
G01 X-11.14925 Y40.95987
G01 X-11.09588 Y40.88001
G01 X-10.99639 Y40.75878
G01 X-10.92847 Y40.69086
G01 X-10.80723 Y40.59137
G01 X-10.72738 Y40.53800
G01 X-10.58907 Y40.46406
G01 X-10.50033 Y40.42731
G01 X-10.35024 Y40.38179
G01 X-10.26741 Y40.36531
G01 X-9.03640 Y40.36533
G01 X-8.95362 Y40.38179
G01 X-8.86177 Y40.40966
G01 X-8.86137 Y40.41014
G01 X-8.81557 Y40.46716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.86137 Y40.32050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.86137 Y40.32050
G01 X-8.86175 Y40.32096
G01 X-8.95362 Y40.34885
G01 X-9.03640 Y40.36533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.62327 Y42.75763 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.62327 Y42.75763
G01 X-8.62240 Y42.76807
G01 X-8.60312 Y42.86876
G01 X-8.59980 Y42.87668
G01 X-8.45194 Y42.97320
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.56592 Y40.16881 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.56592 Y40.16881
G01 X-3.53130 Y40.20514
G01 X-3.48688 Y40.25413
G01 X-3.42564 Y40.32848
G01 X-3.38929 Y40.37748
G01 X-3.35078 Y40.43491
G01 X-3.32140 Y40.48393
G01 X-3.29686 Y40.52970
G01 X-3.27367 Y40.57869
G01 X-3.25823 Y40.61591
G01 X-3.24068 Y40.66493
G01 X-3.23118 Y40.69625
G01 X-3.21888 Y40.74527
G01 X-3.21340 Y40.77275
G01 X-3.20613 Y40.82175
G01 X-3.20364 Y40.84705
G01 X-3.20123 Y40.89604
G01 X-3.20092 Y40.90831
G01 X-3.20092 Y42.10831
G01 X-3.20123 Y42.12060
G01 X-3.20364 Y42.16960
G01 X-3.20613 Y42.19487
G01 X-3.21340 Y42.24389
G01 X-3.21888 Y42.27145
G01 X-3.23118 Y42.32045
G01 X-3.24068 Y42.35172
G01 X-3.25823 Y42.40074
G01 X-3.27367 Y42.43795
G01 X-3.29686 Y42.48695
G01 X-3.32140 Y42.53272
G01 X-3.35078 Y42.58174
G01 X-3.38916 Y42.63902
G01 X-3.42551 Y42.68801
G01 X-3.48688 Y42.76254
G01 X-3.53130 Y42.81153
G01 X-3.55533 Y42.83729
G01 X-3.57593 Y42.83236
G01 X-3.63402 Y42.81781
G01 X-3.72241 Y42.80018
G01 X-3.88904 Y42.77546
G01 X-3.96999 Y42.76749
G01 X-4.13661 Y42.75931
G01 X-4.17593 Y42.75832
G01 X-4.42594 Y42.75832
G01 X-4.46524 Y42.75931
G01 X-4.63186 Y42.76749
G01 X-4.71281 Y42.77546
G01 X-4.87943 Y42.80018
G01 X-4.96783 Y42.81781
G01 X-5.02591 Y42.83236
G01 X-5.07364 Y42.84308
G01 X-5.08342 Y42.84501
G01 X-5.09790 Y42.84359
G01 X-5.09912 Y42.84239
G01 X-5.09914 Y42.84239
G01 X-5.12078 Y42.82177
G01 X-5.19587 Y42.75230
G01 X-5.23638 Y42.71699
G01 X-5.26170 Y42.69627
G01 X-5.29622 Y42.66630
G01 X-5.30935 Y42.65420
G01 X-5.33381 Y42.63264
G01 X-5.38738 Y42.58748
G01 X-5.39546 Y42.58077
G01 X-5.42525 Y42.55639
G01 X-5.45147 Y42.53386
G01 X-5.47400 Y42.50765
G01 X-5.50504 Y42.46972
G01 X-5.52840 Y42.43950
G01 X-5.54336 Y42.41263
G01 X-5.56625 Y42.36932
G01 X-5.57278 Y42.35664
G01 X-5.58748 Y42.32553
G01 X-5.59213 Y42.31501
G01 X-5.59485 Y42.30876
G01 X-5.59574 Y42.30673
G01 X-5.61692 Y42.26193
G01 X-5.64364 Y42.21009
G01 X-5.66158 Y42.19998
G01 X-5.70016 Y42.17887
G01 X-5.71624 Y42.16980
G01 X-5.76152 Y42.14354
G01 X-5.78464 Y42.13071
G01 X-5.82083 Y42.10899
G01 X-5.84306 Y42.09513
G01 X-5.87814 Y42.07072
G01 X-5.90567 Y42.05029
G01 X-5.93117 Y42.02718
G01 X-5.95606 Y42.00348
G01 X-6.84506 Y41.11448
G01 X-6.86879 Y41.08959
G01 X-6.89188 Y41.06409
G01 X-6.91232 Y41.03655
G01 X-6.92355 Y41.02096
G01 X-6.95060 Y40.97928
G01 X-6.96823 Y40.94984
G01 X-6.98291 Y40.91878
G01 X-6.99213 Y40.89848
G01 X-7.00925 Y40.85517
G01 X-7.02083 Y40.82284
G01 X-7.02916 Y40.78951
G01 X-7.04260 Y40.72205
G01 X-7.04763 Y40.68807
G01 X-7.04933 Y40.65375
G01 X-7.05017 Y40.61933
G01 X-7.05017 Y37.57781
G01 X-7.05235 Y37.52262
G01 X-7.05479 Y37.49163
G01 X-7.07996 Y37.35076
G01 X-7.10170 Y37.32668
G01 X-7.14402 Y37.28180
G01 X-7.14819 Y37.27741
G01 X-7.19784 Y37.22562
G01 X-7.27214 Y37.15790
G01 X-7.32721 Y37.14708
G01 X-7.38839 Y37.13738
G01 X-7.49944 Y37.12856
G01 X-8.01773 Y37.12856
G01 X-8.07290 Y37.13075
G01 X-8.10389 Y37.13318
G01 X-8.24120 Y37.15737
G01 X-8.25804 Y37.17550
G01 X-8.26594 Y37.18429
G01 X-8.30861 Y37.22803
G01 X-8.30930 Y37.22869
G01 X-8.37625 Y37.30115
G01 X-8.41483 Y37.34375
G01 X-8.46350 Y37.39242
G01 X-8.50490 Y37.42993
G01 X-8.54399 Y37.46013
G01 X-8.58369 Y37.49318
G01 X-8.62850 Y37.53336
G01 X-8.63645 Y37.54040
G01 X-8.67577 Y37.57466
G01 X-8.75405 Y37.65307
G01 X-8.81562 Y37.72358
G01 X-8.86137 Y37.78050
G01 X-8.86175 Y37.78096
G01 X-8.95362 Y37.80885
G01 X-9.03640 Y37.82531
G01 X-10.26741 Y37.82531
G01 X-10.35024 Y37.80885
G01 X-10.50033 Y37.76331
G01 X-10.58907 Y37.72655
G01 X-10.72738 Y37.65264
G01 X-10.80723 Y37.59927
G01 X-10.92847 Y37.49978
G01 X-10.99639 Y37.43186
G01 X-11.09588 Y37.31063
G01 X-11.14925 Y37.23075
G01 X-11.22318 Y37.09244
G01 X-11.25994 Y37.00370
G01 X-11.30546 Y36.85363
G01 X-11.32420 Y36.75942
G01 X-11.33957 Y36.60334
G01 X-11.33957 Y36.50728
G01 X-11.32420 Y36.35122
G01 X-11.30546 Y36.25701
G01 X-11.25994 Y36.10692
G01 X-11.22318 Y36.01818
G01 X-11.14925 Y35.87987
G01 X-11.09588 Y35.80001
G01 X-10.99639 Y35.67878
G01 X-10.92847 Y35.61086
G01 X-10.80723 Y35.51137
G01 X-10.72738 Y35.45800
G01 X-10.58907 Y35.38406
G01 X-10.50033 Y35.34731
G01 X-10.35024 Y35.30179
G01 X-10.26741 Y35.28533
G01 X-9.03640 Y35.28533
G01 X-8.95362 Y35.30179
G01 X-8.80356 Y35.34731
G01 X-8.71481 Y35.38406
G01 X-8.57650 Y35.45800
G01 X-8.49662 Y35.51137
G01 X-8.40284 Y35.58833
G01 X-7.32439 Y35.58833
G01 X-7.29439 Y35.55178
G01 X-7.22647 Y35.48386
G01 X-7.10524 Y35.38437
G01 X-7.02538 Y35.33100
G01 X-6.88707 Y35.25706
G01 X-6.79833 Y35.22031
G01 X-6.64824 Y35.17479
G01 X-6.55403 Y35.15605
G01 X-6.39797 Y35.14068
G01 X-6.30191 Y35.14068
G01 X-6.28372 Y35.14246
G01 X-6.15070 Y35.20538
G01 X-6.07336 Y35.24665
G01 X-5.93470 Y35.32978
G01 X-5.87351 Y35.37063
G01 X-5.74616 Y35.46504
G01 X-5.69518 Y35.50687
G01 X-5.57882 Y35.61233
G01 X-5.53394 Y35.65722
G01 X-5.42848 Y35.77357
G01 X-5.38670 Y35.82453
G01 X-5.29223 Y35.95186
G01 X-5.25131 Y36.01315
G01 X-5.16821 Y36.15183
G01 X-5.12698 Y36.22910
G01 X-5.06407 Y36.36212
G01 X-3.56592 Y37.86026
G01 X-3.56592 Y40.16881
G01 X-3.57593 Y40.16831
G01 X-5.02594 Y40.16831
G01 X-5.07397 Y40.17067
G01 X-5.12274 Y40.17547
G01 X-5.21695 Y40.19421
G01 X-5.26384 Y40.20844
G01 X-5.35258 Y40.24519
G01 X-5.39582 Y40.26831
G01 X-5.46607 Y40.31525
G01 X-5.50994 Y40.27138
G01 X-5.50994 Y37.40275
G01 X-5.47339 Y37.37278
G01 X-5.40547 Y37.30486
G01 X-5.30598 Y37.18363
G01 X-5.25261 Y37.10375
G01 X-5.17870 Y36.96544
G01 X-5.14242 Y36.87791
G01 X-5.14194 Y36.87670
G01 X-5.09640 Y36.72663
G01 X-5.07768 Y36.63242
G01 X-5.06229 Y36.47634
G01 X-5.06229 Y36.38028
G01 X-5.06407 Y36.36212
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-2.89483 Y36.22333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.89483 Y36.22333
G01 X-2.79879 Y36.25153
G01 X-2.61591 Y36.43438
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-2.61591 Y36.18295 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-2.61591 Y36.18295
G01 X-2.69554 Y36.22897
G01 X-2.78101 Y36.25673
G01 X-2.89483 Y36.22333
G01 X-2.95602 Y36.19801
G01 X-3.14444 Y36.08884
G01 X-3.18099 Y36.06001
G01 X-3.24309 Y36.00484
G01 X-5.80811 Y33.43982
G01 X-5.88032 Y33.35521
G01 X-5.91672 Y33.30510
G01 X-6.03577 Y33.06672
G01 X-6.05698 Y33.00142
G01 X-6.06003 Y32.99085
G01 X-6.06000 Y32.99083
G01 X-6.04212 Y32.92407
G01 X-6.25487 Y32.71132
G01 X-6.30191 Y32.71595
G01 X-6.33435 Y32.71597
G01 X-6.39546 Y32.69072
G01 X-6.54603 Y32.61953
G01 X-6.61773 Y32.58125
G01 X-6.75642 Y32.49812
G01 X-6.81273 Y32.46055
G01 X-6.94006 Y32.36611
G01 X-6.98669 Y32.32786
G01 X-7.10305 Y32.22240
G01 X-7.14400 Y32.18145
G01 X-7.20221 Y32.11722
G01 X-7.22736 Y32.04696
G01 X-7.24323 Y31.99471
G01 X-7.28253 Y31.83789
G01 X-7.29093 Y31.79576
G01 X-7.31420 Y31.63889
G01 X-7.31781 Y31.60244
G01 X-7.32550 Y31.44562
G01 X-7.32550 Y31.41105
G01 X-7.31781 Y31.25420
G01 X-7.31420 Y31.21773
G01 X-7.29091 Y31.06091
G01 X-7.28253 Y31.01879
G01 X-7.24326 Y30.86195
G01 X-7.22733 Y30.80965
G01 X-7.17122 Y30.65283
G01 X-7.14318 Y30.58534
G01 X-7.10092 Y30.49596
G01 X-7.10092 Y29.85974
G01 X-7.14163 Y29.68794
G01 X-7.14661 Y29.64529
G01 X-7.15545 Y29.62182
G01 X-7.21156 Y29.46498
G01 X-7.22837 Y29.40973
G01 X-7.26764 Y29.25291
G01 X-7.27663 Y29.20788
G01 X-7.29988 Y29.05103
G01 X-7.30376 Y29.01184
G01 X-7.31146 Y28.85505
G01 X-7.31146 Y28.81766
G01 X-7.30376 Y28.66081
G01 X-7.29988 Y28.62164
G01 X-7.27663 Y28.46477
G01 X-7.26764 Y28.41974
G01 X-7.22837 Y28.26292
G01 X-7.21156 Y28.20768
G01 X-7.15545 Y28.05083
G01 X-7.15167 Y28.04049
G01 X-7.15167 Y27.03244
G01 X-7.14288 Y26.92152
G01 X-7.13320 Y26.86036
G01 X-7.13224 Y26.85444
G01 X-7.05002 Y26.74639
G01 X-7.03947 Y26.73496
G01 X-7.02009 Y26.71479
G01 X-6.02845 Y25.72315
G01 X-5.94374 Y25.65089
G01 X-5.89363 Y25.61451
G01 X-5.88883 Y25.61101
G01 X-5.75385 Y25.59272
G01 X-5.73831 Y25.59211
G01 X-5.71080 Y25.59160
G01 X-4.83694 Y25.59160
G01 X-4.79627 Y25.59041
G01 X-4.77877 Y25.58838
G01 X-4.69264 Y25.56188
G01 X-4.62015 Y25.51804
G01 X-4.56021 Y25.45813
G01 X-4.51637 Y25.38558
G01 X-4.48990 Y25.29950
G01 X-4.48784 Y25.28198
G01 X-4.48667 Y25.24136
G01 X-4.48667 Y23.54131
G01 X-4.48784 Y23.50067
G01 X-4.48990 Y23.48317
G01 X-4.51637 Y23.39702
G01 X-4.56018 Y23.32455
G01 X-4.62015 Y23.26461
G01 X-4.69264 Y23.22077
G01 X-4.77877 Y23.19430
G01 X-4.79627 Y23.19224
G01 X-4.83694 Y23.19107
G01 X-6.53691 Y23.19107
G01 X-6.57758 Y23.19224
G01 X-6.59508 Y23.19430
G01 X-6.68121 Y23.22077
G01 X-6.75370 Y23.26461
G01 X-6.81364 Y23.32455
G01 X-6.85748 Y23.39704
G01 X-6.88395 Y23.48317
G01 X-6.88601 Y23.50067
G01 X-6.88718 Y23.54131
G01 X-6.88718 Y24.41520
G01 X-6.89596 Y24.52607
G01 X-6.90564 Y24.58726
G01 X-6.90661 Y24.59323
G01 X-6.98883 Y24.70131
G01 X-6.99937 Y24.71271
G01 X-7.01877 Y24.73288
G01 X-7.63094 Y25.34502
G01 X-8.27391 Y25.98802
G01 X-8.34707 Y26.06120
G01 X-8.37079 Y26.08611
G01 X-8.39388 Y26.11159
G01 X-8.41433 Y26.13912
G01 X-8.45260 Y26.19640
G01 X-8.47023 Y26.22582
G01 X-8.48494 Y26.25690
G01 X-8.51125 Y26.32051
G01 X-8.52283 Y26.35284
G01 X-8.53117 Y26.38617
G01 X-8.54145 Y26.43432
G01 X-8.54460 Y26.45360
G01 X-8.54757 Y26.47372
G01 X-8.55631 Y26.52139
G01 X-8.56396 Y26.55632
G01 X-8.57097 Y26.58553
G01 X-8.58692 Y26.64669
G01 X-8.62596 Y26.76130
G01 X-8.76330 Y26.80443
G01 X-8.82451 Y26.81789
G01 X-8.95773 Y26.83445
G01 X-8.96939 Y26.83478
G01 X-8.99004 Y26.83508
G01 X-18.41194 Y26.83508
G01 X-18.44639 Y26.83595
G01 X-18.48065 Y26.83762
G01 X-18.51466 Y26.84265
G01 X-18.58210 Y26.85607
G01 X-18.61545 Y26.86442
G01 X-18.64776 Y26.87598
G01 X-18.71136 Y26.90232
G01 X-18.74240 Y26.91703
G01 X-18.77186 Y26.93465
G01 X-18.82914 Y26.97293
G01 X-18.85670 Y26.99338
G01 X-18.88217 Y27.01647
G01 X-18.90707 Y27.04019
G01 X-19.12490 Y27.25802
G01 X-19.20961 Y27.33031
G01 X-19.25972 Y27.36668
G01 X-19.49800 Y27.48563
G01 X-19.56330 Y27.50686
G01 X-19.57463 Y27.51012
G01 X-19.64179 Y27.57725
G01 X-19.64232 Y27.60135
G01 X-19.64344 Y27.62381
G01 X-19.64486 Y27.68070
G01 X-19.64486 Y27.76947
G01 X-19.64415 Y27.80572
G01 X-19.64229 Y27.85157
G01 X-19.64171 Y27.88012
G01 X-19.64171 Y27.92967
G01 X-19.63894 Y27.98751
G01 X-19.63249 Y28.05304
G01 X-19.63173 Y28.06137
G01 X-19.62871 Y28.09866
G01 X-19.62802 Y28.10605
G01 X-19.62119 Y28.17570
G01 X-19.61875 Y28.19531
G01 X-19.60966 Y28.25675
G01 X-19.60605 Y28.29322
G01 X-19.59835 Y28.45007
G01 X-19.59835 Y28.48464
G01 X-19.60605 Y28.64146
G01 X-19.60966 Y28.67791
G01 X-19.63290 Y28.83473
G01 X-19.64133 Y28.87691
G01 X-19.68062 Y29.03373
G01 X-19.69650 Y29.08598
G01 X-19.75261 Y29.24280
G01 X-19.78065 Y29.31034
G01 X-19.85484 Y29.46716
G01 X-19.90277 Y29.55657
G01 X-19.91189 Y29.57178
G01 X-19.91192 Y29.84951
G01 X-19.86216 Y29.93787
G01 X-19.83709 Y29.99904
G01 X-19.78222 Y30.20747
G01 X-19.77691 Y30.25296
G01 X-19.77216 Y30.33465
G01 X-19.77216 Y31.48918
G01 X-19.78095 Y31.60023
G01 X-19.79066 Y31.66142
G01 X-19.79160 Y31.66723
G01 X-19.87409 Y31.77556
G01 X-19.88464 Y31.78697
G01 X-19.90376 Y31.80686
G01 X-20.28240 Y32.18549
G01 X-20.36701 Y32.25771
G01 X-20.41712 Y32.29410
G01 X-20.43503 Y32.30673
G01 X-20.53932 Y32.31587
G01 X-20.55700 Y32.31613
G01 X-20.57254 Y32.31653
G01 X-20.60008 Y32.31757
G01 X-20.60833 Y32.31793
G01 X-20.66894 Y32.32090
G01 X-20.76436 Y32.33355
G01 X-20.83216 Y32.34594
G01 X-20.85646 Y32.35163
G01 X-20.98204 Y32.39222
G01 X-21.03665 Y32.41242
G01 X-21.04618 Y32.41745
G01 X-21.18428 Y32.49172
G01 X-21.20409 Y32.50276
G01 X-21.24128 Y32.53055
G01 X-21.34153 Y32.61066
G01 X-21.35499 Y32.63916
G01 X-21.38156 Y32.70309
G01 X-21.43767 Y32.85991
G01 X-21.45253 Y32.90881
G01 X-21.49180 Y33.06563
G01 X-21.49957 Y33.10457
G01 X-21.52283 Y33.26141
G01 X-21.52614 Y33.29476
G01 X-21.53383 Y33.45158
G01 X-21.53383 Y33.48305
G01 X-21.52614 Y33.63990
G01 X-21.52283 Y33.67325
G01 X-21.49957 Y33.83007
G01 X-21.49182 Y33.86901
G01 X-21.45253 Y34.02582
G01 X-21.43764 Y34.07477
G01 X-21.38153 Y34.23159
G01 X-21.35499 Y34.29547
G01 X-21.34089 Y34.32529
G01 X-21.24669 Y34.41069
G01 X-21.19136 Y34.45605
G01 X-21.06401 Y34.55051
G01 X-20.99782 Y34.59468
G01 X-20.85913 Y34.67782
G01 X-20.77628 Y34.72201
G01 X-20.72888 Y34.74444
G01 X-20.66901 Y34.80431
G01 X-20.62197 Y34.79966
G01 X-20.52591 Y34.79966
G01 X-20.45225 Y34.80695
G01 X-20.37275 Y34.84454
G01 X-20.29195 Y34.88765
G01 X-20.15329 Y34.97076
G01 X-20.08895 Y35.01371
G01 X-19.96160 Y35.10814
G01 X-19.90793 Y35.15219
G01 X-19.79160 Y35.25762
G01 X-19.74422 Y35.30499
G01 X-19.63879 Y35.42133
G01 X-19.59475 Y35.47500
G01 X-19.50031 Y35.60235
G01 X-19.45736 Y35.66669
G01 X-19.37425 Y35.80535
G01 X-19.33114 Y35.88615
G01 X-19.29355 Y35.96562
G01 X-19.28629 Y36.03928
G01 X-19.28629 Y36.13535
G01 X-19.29094 Y36.18239
G01 X-18.95957 Y36.51373
G01 X-18.92401 Y36.59984
G01 X-18.85279 Y36.75041
G01 X-18.82421 Y36.80540
G01 X-18.81568 Y36.82038
G01 X-18.78327 Y36.88411
G01 X-18.76417 Y36.92661
G01 X-18.74865 Y36.96394
G01 X-18.73656 Y36.99557
G01 X-18.72104 Y37.02716
G01 X-18.65340 Y37.15678
G01 X-18.64773 Y37.16580
G01 X-18.60834 Y37.22236
G01 X-18.54654 Y37.30232
G01 X-18.50902 Y37.34375
G01 X-18.46036 Y37.39242
G01 X-18.41895 Y37.42993
G01 X-18.37986 Y37.46013
G01 X-18.34016 Y37.49318
G01 X-18.29536 Y37.53336
G01 X-18.28741 Y37.54040
G01 X-18.24809 Y37.57466
G01 X-18.16981 Y37.65307
G01 X-18.10821 Y37.72358
G01 X-18.06249 Y37.78050
G01 X-18.06246 Y37.78050
G01 X-18.06211 Y37.78099
G01 X-17.97024 Y37.80885
G01 X-17.88741 Y37.82531
G01 X-16.65637 Y37.82531
G01 X-16.57362 Y37.80885
G01 X-16.42356 Y37.76331
G01 X-16.33481 Y37.72655
G01 X-16.19648 Y37.65264
G01 X-16.11662 Y37.59927
G01 X-15.99539 Y37.49978
G01 X-15.92747 Y37.43186
G01 X-15.82798 Y37.31063
G01 X-15.77459 Y37.23075
G01 X-15.70067 Y37.09244
G01 X-15.66394 Y37.00370
G01 X-15.61840 Y36.85363
G01 X-15.59968 Y36.75942
G01 X-15.58429 Y36.60334
G01 X-15.58429 Y36.50728
G01 X-15.59968 Y36.35122
G01 X-15.61840 Y36.25701
G01 X-15.66394 Y36.10692
G01 X-15.70067 Y36.01818
G01 X-15.77459 Y35.87987
G01 X-15.82798 Y35.80001
G01 X-15.92747 Y35.67878
G01 X-15.99539 Y35.61086
G01 X-16.09351 Y35.53032
G01 X-16.11662 Y35.51137
G01 X-16.19648 Y35.45800
G01 X-16.33481 Y35.38406
G01 X-16.42356 Y35.34731
G01 X-16.57362 Y35.30179
G01 X-16.65637 Y35.28533
G01 X-17.62627 Y35.28531
G01 X-17.67189 Y35.26641
G01 X-17.71448 Y35.24756
G01 X-17.86506 Y35.17634
G01 X-17.93140 Y35.14094
G01 X-18.07008 Y35.05783
G01 X-18.12182 Y35.02331
G01 X-18.24915 Y34.92885
G01 X-18.29160 Y34.89402
G01 X-18.40796 Y34.78859
G01 X-18.44519 Y34.75135
G01 X-18.55063 Y34.63499
G01 X-18.58548 Y34.59252
G01 X-18.67991 Y34.46517
G01 X-18.71438 Y34.41353
G01 X-18.79752 Y34.27487
G01 X-18.83295 Y34.20845
G01 X-18.90417 Y34.05788
G01 X-18.94082 Y33.96916
G01 X-18.95566 Y33.92763
G01 X-18.94420 Y33.81122
G01 X-18.92546 Y33.71701
G01 X-18.87994 Y33.56692
G01 X-18.84318 Y33.47818
G01 X-18.76925 Y33.33987
G01 X-18.71588 Y33.26001
G01 X-18.61639 Y33.13878
G01 X-18.54847 Y33.07086
G01 X-18.42723 Y32.97137
G01 X-18.34738 Y32.91800
G01 X-18.20907 Y32.84406
G01 X-18.12033 Y32.80731
G01 X-17.97024 Y32.76179
G01 X-17.88741 Y32.74533
G01 X-16.65637 Y32.74533
G01 X-16.57362 Y32.76179
G01 X-16.42356 Y32.80731
G01 X-16.33481 Y32.84406
G01 X-16.19648 Y32.91800
G01 X-16.11662 Y32.97137
G01 X-16.09351 Y32.99032
G01 X-15.99539 Y33.07086
G01 X-15.92747 Y33.13878
G01 X-15.82798 Y33.26001
G01 X-15.77459 Y33.33987
G01 X-15.70067 Y33.47818
G01 X-15.66394 Y33.56692
G01 X-15.61840 Y33.71701
G01 X-15.59968 Y33.81122
G01 X-15.58429 Y33.96728
G01 X-15.58429 Y34.06334
G01 X-15.59968 Y34.21942
G01 X-15.61840 Y34.31363
G01 X-15.66394 Y34.46370
G01 X-15.70067 Y34.55244
G01 X-15.77459 Y34.69075
G01 X-15.82798 Y34.77063
G01 X-15.92747 Y34.89186
G01 X-15.99539 Y34.95978
G01 X-16.11662 Y35.05927
G01 X-16.19648 Y35.11264
G01 X-16.33481 Y35.18655
G01 X-16.42356 Y35.22331
G01 X-16.57362 Y35.26885
G01 X-16.65637 Y35.28533
G01 X-16.87192 Y35.28533
G01 X-17.62627 Y35.28531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.95566 Y33.92763 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.95566 Y33.92763
G01 X-19.29363 Y33.58968
G01 X-19.28629 Y33.51534
G01 X-19.28629 Y33.41927
G01 X-19.29094 Y33.37226
G01 X-18.47796 Y32.55928
G01 X-18.44565 Y32.52364
G01 X-18.43607 Y32.51198
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-20.72888 Y34.74444 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-20.72888 Y34.74444
G01 X-20.62197 Y34.75496
G01 X-20.52591 Y34.75496
G01 X-20.50617 Y34.75300
G01 X-20.45225 Y34.80695
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.29355 Y35.96562 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.29355 Y35.96562
G01 X-18.93821 Y36.32099
G01 X-18.94420 Y36.35122
G01 X-18.95957 Y36.50728
G01 X-18.95957 Y36.51373
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.06246 Y37.78050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.06246 Y37.78050
G01 X-18.06099 Y37.79473
G01 X-18.06099 Y37.85592
G01 X-18.06249 Y37.87017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.88741 Y37.82531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.88741 Y37.82531
G01 X-17.97024 Y37.84179
G01 X-18.06206 Y37.86963
G01 X-18.10829 Y37.92714
G01 X-18.16975 Y37.99755
G01 X-18.24816 Y38.07606
G01 X-18.28736 Y38.11022
G01 X-18.29541 Y38.11733
G01 X-18.34016 Y38.15747
G01 X-18.37986 Y38.19051
G01 X-18.41895 Y38.22071
G01 X-18.46036 Y38.25823
G01 X-18.50902 Y38.30689
G01 X-18.54654 Y38.34832
G01 X-18.60834 Y38.42828
G01 X-18.64773 Y38.48485
G01 X-18.65340 Y38.49386
G01 X-18.72104 Y38.62348
G01 X-18.73625 Y38.65447
G01 X-18.74740 Y38.68711
G01 X-18.79122 Y38.82658
G01 X-18.79360 Y38.83699
G01 X-18.80572 Y38.90489
G01 X-18.81860 Y39.00509
G01 X-18.82134 Y39.06092
G01 X-18.82134 Y39.12973
G01 X-18.81860 Y39.18558
G01 X-18.80572 Y39.28578
G01 X-18.79360 Y39.35370
G01 X-18.79119 Y39.36414
G01 X-18.79081 Y39.36539
G01 X-18.74740 Y39.50356
G01 X-18.73625 Y39.53618
G01 X-18.72104 Y39.56716
G01 X-18.65340 Y39.69678
G01 X-18.64773 Y39.70580
G01 X-18.60834 Y39.76236
G01 X-18.54654 Y39.84232
G01 X-18.50902 Y39.88375
G01 X-18.46036 Y39.93242
G01 X-18.41895 Y39.96993
G01 X-18.37986 Y40.00013
G01 X-18.34016 Y40.03318
G01 X-18.29536 Y40.07336
G01 X-18.28741 Y40.08040
G01 X-18.24809 Y40.11466
G01 X-18.16981 Y40.19307
G01 X-18.10821 Y40.26358
G01 X-18.06249 Y40.32050
G01 X-18.06246 Y40.32050
G01 X-18.06211 Y40.32099
G01 X-17.97024 Y40.34885
G01 X-17.88741 Y40.36531
G01 X-16.65637 Y40.36533
G01 X-16.57362 Y40.34885
G01 X-16.42356 Y40.30331
G01 X-16.33481 Y40.26655
G01 X-16.19648 Y40.19264
G01 X-16.11662 Y40.13927
G01 X-15.99539 Y40.03978
G01 X-15.92747 Y39.97186
G01 X-15.82798 Y39.85063
G01 X-15.77459 Y39.77075
G01 X-15.70067 Y39.63244
G01 X-15.66394 Y39.54370
G01 X-15.61840 Y39.39363
G01 X-15.59968 Y39.29942
G01 X-15.58429 Y39.14334
G01 X-15.58429 Y39.04728
G01 X-15.59968 Y38.89122
G01 X-15.61840 Y38.79701
G01 X-15.66394 Y38.64692
G01 X-15.70067 Y38.55818
G01 X-15.77459 Y38.41987
G01 X-15.82798 Y38.34001
G01 X-15.92747 Y38.21878
G01 X-15.99539 Y38.15086
G01 X-16.09351 Y38.07032
G01 X-16.11662 Y38.05137
G01 X-16.19648 Y37.99800
G01 X-16.33481 Y37.92406
G01 X-16.42356 Y37.88731
G01 X-16.57362 Y37.84179
G01 X-16.65637 Y37.82531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.65637 Y40.36533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.65637 Y40.36533
G01 X-16.57362 Y40.38179
G01 X-16.42356 Y40.42731
G01 X-16.33481 Y40.46406
G01 X-16.19648 Y40.53800
G01 X-16.11662 Y40.59137
G01 X-16.09351 Y40.61032
G01 X-15.99539 Y40.69086
G01 X-15.92747 Y40.75878
G01 X-15.82798 Y40.88001
G01 X-15.77459 Y40.95987
G01 X-15.70067 Y41.09818
G01 X-15.66394 Y41.18692
G01 X-15.61840 Y41.33701
G01 X-15.59968 Y41.43122
G01 X-15.58429 Y41.58728
G01 X-15.58429 Y41.68334
G01 X-15.59968 Y41.83942
G01 X-15.61840 Y41.93363
G01 X-15.66394 Y42.08370
G01 X-15.70067 Y42.17244
G01 X-15.77459 Y42.31075
G01 X-15.82798 Y42.39063
G01 X-15.92747 Y42.51186
G01 X-15.99539 Y42.57978
G01 X-16.11662 Y42.67927
G01 X-16.19648 Y42.73264
G01 X-16.33481 Y42.80655
G01 X-16.42356 Y42.84331
G01 X-16.43194 Y42.84585
G01 X-16.43194 Y42.96477
G01 X-16.42356 Y42.96731
G01 X-16.33481 Y43.00406
G01 X-16.19648 Y43.07800
G01 X-16.11662 Y43.13137
G01 X-15.99539 Y43.23086
G01 X-15.92747 Y43.29878
G01 X-15.82798 Y43.42001
G01 X-15.77459 Y43.49987
G01 X-15.70067 Y43.63818
G01 X-15.66394 Y43.72692
G01 X-15.61840 Y43.87701
G01 X-15.59968 Y43.97122
G01 X-15.58429 Y44.12728
G01 X-15.58429 Y44.22334
G01 X-15.59968 Y44.37942
G01 X-15.61840 Y44.47363
G01 X-15.66394 Y44.62370
G01 X-15.70067 Y44.71244
G01 X-15.77459 Y44.85075
G01 X-15.82798 Y44.93063
G01 X-15.92747 Y45.05186
G01 X-15.99539 Y45.11978
G01 X-16.11662 Y45.21927
G01 X-16.19648 Y45.27264
G01 X-16.33481 Y45.34655
G01 X-16.42356 Y45.38331
G01 X-16.43194 Y45.38585
G01 X-16.43194 Y45.50132
G01 X-16.43430 Y45.54935
G01 X-16.44101 Y45.61765
G01 X-16.45975 Y45.71186
G01 X-16.47964 Y45.77752
G01 X-16.51642 Y45.86626
G01 X-16.54878 Y45.92677
G01 X-16.60214 Y46.00662
G01 X-16.64565 Y46.05966
G01 X-16.67796 Y46.09530
G01 X-18.97194 Y48.38927
G01 X-18.97194 Y48.59951
G01 X-18.90006 Y48.65849
G01 X-18.83211 Y48.72643
G01 X-18.72642 Y48.85523
G01 X-18.67306 Y48.93509
G01 X-18.59449 Y49.08206
G01 X-18.56193 Y49.16064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.06194 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.06194 Y50.36592
G01 X-16.02935 Y50.44459
G01 X-15.95084 Y50.59153
G01 X-15.89747 Y50.67141
G01 X-15.79176 Y50.80021
G01 X-15.72384 Y50.86813
G01 X-15.65190 Y50.92716
G01 X-15.65190 Y51.39782
G01 X-15.64954 Y51.44586
G01 X-15.64281 Y51.51416
G01 X-15.62409 Y51.60837
G01 X-15.60415 Y51.67402
G01 X-15.56742 Y51.76277
G01 X-15.53506 Y51.82327
G01 X-15.48170 Y51.90313
G01 X-15.43816 Y51.95617
G01 X-15.40588 Y51.99180
G01 X-12.72791 Y54.66978
G01 X-12.72791 Y54.86785
G01 X-12.76448 Y54.89784
G01 X-12.83240 Y54.96576
G01 X-12.91292 Y55.06388
G01 X-12.93189 Y55.08700
G01 X-12.98526 Y55.16688
G01 X-13.05917 Y55.30518
G01 X-13.09595 Y55.39393
G01 X-13.14147 Y55.54399
G01 X-13.15790 Y55.62670
G01 X-13.15790 Y56.05771
G01 X-13.14147 Y56.14061
G01 X-13.09595 Y56.29070
G01 X-13.05917 Y56.37945
G01 X-12.98526 Y56.51775
G01 X-12.93189 Y56.59761
G01 X-12.83240 Y56.71885
G01 X-12.76448 Y56.78676
G01 X-12.64325 Y56.88626
G01 X-12.56339 Y56.93962
G01 X-12.42506 Y57.01356
G01 X-12.33631 Y57.05032
G01 X-12.23553 Y57.08090
G01 X-12.18625 Y57.09583
G01 X-12.09204 Y57.11458
G01 X-11.93596 Y57.12994
G01 X-11.83990 Y57.12994
G01 X-11.68384 Y57.11458
G01 X-11.65877 Y57.10960
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.62115 Y56.07412 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.62115 Y56.07412
G01 X-10.61793 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.61793 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.61793 Y55.62670
G01 X-10.63441 Y55.54399
G01 X-10.67993 Y55.39393
G01 X-10.71668 Y55.30518
G01 X-10.79062 Y55.16688
G01 X-10.84399 Y55.08700
G01 X-10.94348 Y54.96576
G01 X-11.01140 Y54.89784
G01 X-11.04792 Y54.86790
G01 X-11.04792 Y54.32182
G01 X-11.05029 Y54.27382
G01 X-11.05699 Y54.20552
G01 X-11.05971 Y54.19188
G01 X-11.07574 Y54.11131
G01 X-11.09565 Y54.04565
G01 X-11.13241 Y53.95690
G01 X-11.16476 Y53.89640
G01 X-11.21813 Y53.81654
G01 X-11.23131 Y53.80046
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.14716 Y51.87463 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.14716 Y51.87463
G01 X-13.97192 Y51.04990
G01 X-13.97192 Y50.92711
G01 X-13.95739 Y50.91520
G01 X-13.90004 Y50.86813
G01 X-13.83212 Y50.80021
G01 X-13.72641 Y50.67141
G01 X-13.67304 Y50.59153
G01 X-13.64863 Y50.54583
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.06194 Y49.16062 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.06194 Y49.16062
G01 X-16.09447 Y49.08206
G01 X-16.17304 Y48.93509
G01 X-16.22640 Y48.85523
G01 X-16.33212 Y48.72643
G01 X-16.40003 Y48.65849
G01 X-16.47194 Y48.59951
G01 X-16.47194 Y48.30228
G01 X-16.10456 Y47.93492
G01 X-15.58317 Y47.41350
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.64863 Y48.98074 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.64863 Y48.98074
G01 X-13.67304 Y48.93509
G01 X-13.72641 Y48.85523
G01 X-13.83212 Y48.72643
G01 X-13.90004 Y48.65849
G01 X-13.97192 Y48.59951
G01 X-13.97192 Y48.08826
G01 X-13.57456 Y47.69090
G01 X-12.45897 Y46.57528
G01 X-12.42666 Y46.53964
G01 X-12.38315 Y46.48661
G01 X-12.32979 Y46.40675
G01 X-12.29743 Y46.34622
G01 X-12.26067 Y46.25750
G01 X-12.24076 Y46.19184
G01 X-12.22201 Y46.09763
G01 X-12.21531 Y46.02933
G01 X-12.21295 Y45.98130
G01 X-12.21295 Y32.48625
G01 X-12.04198 Y32.31531
G01 X-11.02639 Y32.31531
G01 X-10.99639 Y32.35186
G01 X-10.92847 Y32.41978
G01 X-10.80723 Y32.51927
G01 X-10.72738 Y32.57264
G01 X-10.58907 Y32.64655
G01 X-10.50033 Y32.68331
G01 X-10.35024 Y32.72885
G01 X-10.26741 Y32.74533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.69192 Y30.31628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.69192 Y30.31628
G01 X-8.71481 Y30.30406
G01 X-8.80356 Y30.26731
G01 X-8.81194 Y30.26477
G01 X-8.81194 Y30.14585
G01 X-8.80356 Y30.14331
G01 X-8.71481 Y30.10655
G01 X-8.69190 Y30.09431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.03625 Y31.42832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.03625 Y31.42832
G01 X-5.04502 Y31.54529
G01 X-5.06694 Y31.52339
G01 X-5.06229 Y31.47635
G01 X-5.06229 Y31.38029
G01 X-5.06694 Y31.33327
G01 X-5.04502 Y31.31138
G01 X-5.03625 Y31.42832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-6.33435 Y32.71597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-6.33435 Y32.71597
G01 X-6.06025 Y32.99004
G01 X-6.06000 Y32.99083
G01 X-6.05698 Y33.00142
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-6.28372 Y35.14246 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-6.28372 Y35.14246
G01 X-8.44590 Y32.98028
G01 X-8.47821 Y32.94465
G01 X-8.52172 Y32.89161
G01 X-8.57508 Y32.81176
G01 X-8.60744 Y32.75125
G01 X-8.64420 Y32.66251
G01 X-8.65817 Y32.61628
G01 X-8.64811 Y32.59199
G01 X-8.61013 Y32.50962
G01 X-8.60251 Y32.49476
G01 X-8.57153 Y32.42801
G01 X-8.56927 Y32.42253
G01 X-8.55324 Y32.38631
G01 X-8.49825 Y32.27008
G01 X-8.47508 Y32.21430
G01 X-8.41897 Y32.05748
G01 X-8.40640 Y32.01618
G01 X-8.36713 Y31.85936
G01 X-8.36078 Y31.82758
G01 X-8.33752 Y31.67076
G01 X-8.33493 Y31.64445
G01 X-8.32723 Y31.48760
G01 X-8.32723 Y31.46304
G01 X-8.33493 Y31.30622
G01 X-8.33752 Y31.27991
G01 X-8.36078 Y31.12306
G01 X-8.36713 Y31.09129
G01 X-8.40640 Y30.93447
G01 X-8.41897 Y30.89317
G01 X-8.47508 Y30.73635
G01 X-8.49825 Y30.68057
G01 X-8.57244 Y30.52372
G01 X-8.61349 Y30.44717
G01 X-8.69192 Y30.31628
G01 X-8.69190 Y30.09431
G01 X-8.61346 Y29.96342
G01 X-8.57244 Y29.88692
G01 X-8.49825 Y29.73008
G01 X-8.47508 Y29.67430
G01 X-8.41897 Y29.51748
G01 X-8.40640 Y29.47618
G01 X-8.36713 Y29.31938
G01 X-8.36078 Y29.28758
G01 X-8.33752 Y29.13076
G01 X-8.33493 Y29.10445
G01 X-8.32723 Y28.94760
G01 X-8.32723 Y28.92304
G01 X-8.33493 Y28.76625
G01 X-8.33752 Y28.73991
G01 X-8.36078 Y28.58309
G01 X-8.36713 Y28.55129
G01 X-8.40640 Y28.39447
G01 X-8.41897 Y28.35317
G01 X-8.47508 Y28.19637
G01 X-8.48562 Y28.16904
G01 X-8.51295 Y28.15848
G01 X-8.66980 Y28.10237
G01 X-8.71110 Y28.08984
G01 X-8.86792 Y28.05053
G01 X-8.89964 Y28.04420
G01 X-9.05646 Y28.02093
G01 X-9.08280 Y28.01834
G01 X-9.23965 Y28.01062
G01 X-9.25194 Y28.01032
G01 X-10.05194 Y28.01032
G01 X-10.06421 Y28.01062
G01 X-10.22103 Y28.01834
G01 X-10.24737 Y28.02093
G01 X-10.40421 Y28.04420
G01 X-10.43594 Y28.05053
G01 X-10.59276 Y28.08984
G01 X-10.63406 Y28.10237
G01 X-10.79090 Y28.15848
G01 X-10.84668 Y28.18169
G01 X-11.00350 Y28.25583
G01 X-11.08008 Y28.29691
G01 X-11.21092 Y28.37534
G01 X-11.22318 Y28.39818
G01 X-11.25994 Y28.48692
G01 X-11.30546 Y28.63701
G01 X-11.32420 Y28.73125
G01 X-11.33957 Y28.88730
G01 X-11.33957 Y28.98334
G01 X-11.32420 Y29.13942
G01 X-11.30546 Y29.23366
G01 X-11.25994 Y29.38370
G01 X-11.22318 Y29.47244
G01 X-11.14925 Y29.61075
G01 X-11.09588 Y29.69063
G01 X-10.99639 Y29.81186
G01 X-10.92847 Y29.87978
G01 X-10.80723 Y29.97927
G01 X-10.72738 Y30.03264
G01 X-10.58907 Y30.10655
G01 X-10.50033 Y30.14331
G01 X-10.49192 Y30.14587
G01 X-10.49192 Y30.26477
G01 X-10.50033 Y30.26731
G01 X-10.58907 Y30.30406
G01 X-10.72738 Y30.37800
G01 X-10.80723 Y30.43137
G01 X-10.92847 Y30.53086
G01 X-10.99639 Y30.59878
G01 X-11.02639 Y30.63533
G01 X-12.38993 Y30.63533
G01 X-12.43794 Y30.63769
G01 X-12.50624 Y30.64440
G01 X-12.60045 Y30.66314
G01 X-12.66608 Y30.68306
G01 X-12.75483 Y30.71981
G01 X-12.81536 Y30.75217
G01 X-12.89522 Y30.80554
G01 X-12.94825 Y30.84905
G01 X-12.98389 Y30.88133
G01 X-13.64690 Y31.54432
G01 X-13.67919 Y31.57996
G01 X-13.72272 Y31.63299
G01 X-13.77609 Y31.71288
G01 X-13.80842 Y31.77338
G01 X-13.82966 Y31.82464
G01 X-13.82079 Y31.86957
G01 X-13.80136 Y31.94717
G01 X-13.77555 Y32.03264
G01 X-13.74998 Y32.10409
G01 X-13.73679 Y32.13833
G01 X-13.72247 Y32.17287
G01 X-13.71061 Y32.20360
G01 X-13.68607 Y32.27223
G01 X-13.66966 Y32.32616
G01 X-13.65247 Y32.39476
G01 X-13.64292 Y32.44272
G01 X-13.63273 Y32.51135
G01 X-13.62834 Y32.55593
G01 X-13.62496 Y32.62453
G01 X-13.62442 Y32.64633
G01 X-13.62442 Y44.83833
G01 X-13.62496 Y44.86009
G01 X-13.62834 Y44.92872
G01 X-13.63273 Y44.97330
G01 X-13.64292 Y45.04193
G01 X-13.65247 Y45.08989
G01 X-13.66966 Y45.15849
G01 X-13.68607 Y45.21242
G01 X-13.71061 Y45.28105
G01 X-13.72247 Y45.31178
G01 X-13.86115 Y45.64655
G01 X-15.38340 Y47.16883
G01 X-15.41441 Y47.20139
G01 X-15.46057 Y47.25229
G01 X-15.51899 Y47.32351
G01 X-15.56029 Y47.37924
G01 X-15.58317 Y47.41350
G01 X-15.60415 Y47.46413
G01 X-15.62409 Y47.52979
G01 X-15.64281 Y47.62399
G01 X-15.64954 Y47.69229
G01 X-15.65190 Y47.74030
G01 X-15.65190 Y48.59948
G01 X-15.72384 Y48.65849
G01 X-15.79176 Y48.72643
G01 X-15.81693 Y48.75709
G01 X-15.89747 Y48.85523
G01 X-15.95084 Y48.93509
G01 X-16.02935 Y49.08206
G01 X-16.06194 Y49.16062
G01 X-16.06194 Y50.36592
G01 X-16.09447 Y50.44459
G01 X-16.17304 Y50.59153
G01 X-16.22640 Y50.67141
G01 X-16.27692 Y50.73293
G01 X-16.27692 Y54.75540
G01 X-16.21261 Y54.79835
G01 X-16.09140 Y54.89784
G01 X-16.02345 Y54.96576
G01 X-15.92396 Y55.08700
G01 X-15.87062 Y55.16688
G01 X-15.79668 Y55.30518
G01 X-15.75990 Y55.39393
G01 X-15.71439 Y55.54399
G01 X-15.69790 Y55.62670
G01 X-15.69790 Y56.05771
G01 X-15.68147 Y56.14061
G01 X-15.63595 Y56.29070
G01 X-15.59915 Y56.37945
G01 X-15.52523 Y56.51775
G01 X-15.47189 Y56.59761
G01 X-15.37238 Y56.71885
G01 X-15.30448 Y56.78676
G01 X-15.26791 Y56.81679
G01 X-15.26791 Y57.12271
G01 X-15.86684 Y57.72161
G01 X-15.91388 Y57.71699
G01 X-16.00997 Y57.71699
G01 X-16.16605 Y57.73236
G01 X-16.26023 Y57.75110
G01 X-16.41032 Y57.79662
G01 X-16.49907 Y57.83337
G01 X-16.63737 Y57.90731
G01 X-16.71723 Y57.96068
G01 X-16.83844 Y58.06017
G01 X-16.90638 Y58.12809
G01 X-17.00588 Y58.24932
G01 X-17.05927 Y58.32918
G01 X-17.13318 Y58.46751
G01 X-17.16993 Y58.55623
G01 X-17.21545 Y58.70632
G01 X-17.23417 Y58.80053
G01 X-17.24959 Y58.95661
G01 X-17.24959 Y59.05265
G01 X-17.24492 Y59.09971
G01 X-18.00986 Y59.86466
G01 X-18.52706 Y59.86466
G01 X-18.60023 Y59.89926
G01 X-18.68591 Y59.93484
G01 X-18.84275 Y59.99095
G01 X-18.91192 Y60.01201
G01 X-19.06874 Y60.05130
G01 X-19.12711 Y60.06293
G01 X-19.28390 Y60.08617
G01 X-19.33605 Y60.09133
G01 X-19.49287 Y60.09903
G01 X-19.54298 Y60.09903
G01 X-19.69980 Y60.09133
G01 X-19.75195 Y60.08617
G01 X-19.90874 Y60.06293
G01 X-19.96711 Y60.05130
G01 X-20.12393 Y60.01201
G01 X-20.19309 Y59.99095
G01 X-20.33914 Y59.93870
G01 X-20.84481 Y60.14815
G01 X-20.86431 Y60.15681
G01 X-20.93020 Y60.18795
G01 X-20.96076 Y60.20426
G01 X-21.02141 Y60.24063
G01 X-21.04539 Y60.25663
G01 X-21.10109 Y60.29793
G01 X-21.12090 Y60.31419
G01 X-21.17181 Y60.36032
G01 X-21.18070 Y60.36877
G01 X-23.15377 Y62.34185
G01 X-23.16225 Y62.35074
G01 X-23.20838 Y62.40164
G01 X-23.22463 Y62.42145
G01 X-23.26593 Y62.47715
G01 X-23.27411 Y62.48879
G01 X-23.27655 Y62.50276
G01 X-23.28671 Y62.57136
G01 X-23.28923 Y62.59681
G01 X-23.29260 Y62.66542
G01 X-23.29291 Y62.67771
G01 X-23.29291 Y65.42635
G01 X-23.29260 Y65.43861
G01 X-23.28923 Y65.50725
G01 X-23.28671 Y65.53272
G01 X-23.27655 Y65.60133
G01 X-23.27091 Y65.62957
G01 X-23.26230 Y65.66391
G01 X-23.24168 Y65.69175
G01 X-23.22303 Y65.71446
G01 X-23.17691 Y65.76536
G01 X-23.16715 Y65.77560
G01 X-20.30567 Y68.63708
G01 X-20.29591 Y68.64732
G01 X-20.24979 Y68.69822
G01 X-20.23114 Y68.72093
G01 X-20.18984 Y68.77666
G01 X-20.17166 Y68.80389
G01 X-20.13528 Y68.86457
G01 X-20.11699 Y68.89886
G01 X-20.08583 Y68.96472
G01 X-20.07625 Y68.98633
G01 X-19.82764 Y69.58654
G01 X-19.75423 Y69.65308
G01 X-19.68870 Y69.71859
G01 X-19.57666 Y69.84224
G01 X-19.51598 Y69.91620
G01 X-19.34313 Y70.08905
G01 X-19.36914 Y70.15179
G01 X-19.38492 Y70.20383
G01 X-19.38492 Y71.03469
G01 X-19.36914 Y71.08684
G01 X-19.33239 Y71.17559
G01 X-19.25383 Y71.32252
G01 X-19.20046 Y71.40241
G01 X-19.09475 Y71.53121
G01 X-19.02683 Y71.59913
G01 X-18.95492 Y71.65813
G01 X-18.95492 Y72.90428
G01 X-19.03092 Y72.99689
G01 X-19.04989 Y73.02001
G01 X-19.10326 Y73.09986
G01 X-19.17719 Y73.23819
G01 X-19.21395 Y73.32691
G01 X-19.25947 Y73.47700
G01 X-19.27592 Y73.55973
G01 X-19.27592 Y74.79077
G01 X-19.25947 Y74.87362
G01 X-19.23160 Y74.96549
G01 X-19.23109 Y74.96587
G01 X-19.23109 Y74.96590
G01 X-19.17417 Y75.01162
G01 X-19.10371 Y75.07316
G01 X-19.02525 Y75.15150
G01 X-18.99104 Y75.19077
G01 X-18.98398 Y75.19877
G01 X-18.94379 Y75.24357
G01 X-18.91077 Y75.28322
G01 X-18.88057 Y75.32231
G01 X-18.84301 Y75.36374
G01 X-18.79434 Y75.41241
G01 X-18.75291 Y75.44995
G01 X-18.67295 Y75.51172
G01 X-18.61639 Y75.55114
G01 X-18.60737 Y75.55681
G01 X-18.47776 Y75.62445
G01 X-18.44677 Y75.63966
G01 X-18.41410 Y75.65081
G01 X-18.27463 Y75.69463
G01 X-18.26422 Y75.69701
G01 X-18.19642 Y75.70910
G01 X-18.09620 Y75.72198
G01 X-18.04039 Y75.72473
G01 X-17.97148 Y75.72473
G01 X-17.91565 Y75.72198
G01 X-17.81542 Y75.70913
G01 X-17.74763 Y75.69701
G01 X-17.73717 Y75.69460
G01 X-17.59772 Y75.65081
G01 X-17.56508 Y75.63966
G01 X-17.53409 Y75.62445
G01 X-17.40445 Y75.55681
G01 X-17.39541 Y75.55114
G01 X-17.33884 Y75.51175
G01 X-17.25891 Y75.44995
G01 X-17.21751 Y75.41243
G01 X-17.16882 Y75.36374
G01 X-17.13130 Y75.32231
G01 X-17.10107 Y75.28322
G01 X-17.06805 Y75.24357
G01 X-17.02787 Y75.19877
G01 X-17.02081 Y75.19077
G01 X-16.98660 Y75.15150
G01 X-16.90814 Y75.07316
G01 X-16.83768 Y75.01162
G01 X-16.78073 Y74.96590
G01 X-16.78070 Y74.96587
G01 X-16.78025 Y74.96552
G01 X-16.75241 Y74.87362
G01 X-16.73592 Y74.79077
G01 X-16.73592 Y73.55973
G01 X-16.71947 Y73.47700
G01 X-16.67395 Y73.32691
G01 X-16.63717 Y73.23819
G01 X-16.56326 Y73.09986
G01 X-16.50989 Y73.02001
G01 X-16.49092 Y72.99689
G01 X-16.41492 Y72.90428
G01 X-16.41492 Y71.65813
G01 X-16.48683 Y71.59913
G01 X-16.55475 Y71.53121
G01 X-16.66046 Y71.40241
G01 X-16.71383 Y71.32252
G01 X-16.79239 Y71.17559
G01 X-16.82914 Y71.08684
G01 X-16.84489 Y71.03469
G01 X-16.84489 Y70.20383
G01 X-16.82914 Y70.15179
G01 X-16.79239 Y70.06304
G01 X-16.78929 Y70.05732
G01 X-16.90054 Y70.05735
G01 X-17.06066 Y69.96136
G01 X-17.13394 Y69.92207
G01 X-17.30059 Y69.84325
G01 X-17.35256 Y69.82166
G01 X-17.51918 Y69.76205
G01 X-17.55622 Y69.75080
G01 X-17.66866 Y69.72263
G01 X-17.68355 Y69.71851
G01 X-17.72172 Y69.70693
G01 X-17.74903 Y69.70007
G01 X-17.75065 Y69.69974
G01 X-17.77712 Y69.69311
G01 X-17.84278 Y69.67320
G01 X-17.86849 Y69.66401
G01 X-17.89437 Y69.65329
G01 X-17.92744 Y69.62878
G01 X-17.94804 Y69.61186
G01 X-17.99894 Y69.56573
G01 X-18.00821 Y69.55692
G01 X-22.20749 Y65.35764
G01 X-22.21630 Y65.34837
G01 X-22.26243 Y65.29747
G01 X-22.27935 Y65.27687
G01 X-22.32065 Y65.22116
G01 X-22.32111 Y65.22056
G01 X-22.32654 Y65.19305
G01 X-22.33673 Y65.12442
G01 X-22.33924 Y65.09897
G01 X-22.34262 Y65.03033
G01 X-22.34292 Y65.01804
G01 X-22.34292 Y63.07123
G01 X-22.34262 Y63.05896
G01 X-22.33924 Y62.99033
G01 X-22.33673 Y62.96491
G01 X-22.32654 Y62.89628
G01 X-22.32410 Y62.88226
G01 X-22.31595 Y62.87067
G01 X-22.27465 Y62.81497
G01 X-22.25839 Y62.79516
G01 X-22.21227 Y62.74426
G01 X-22.20378 Y62.73539
G01 X-20.78717 Y61.31879
G01 X-20.77828 Y61.31033
G01 X-20.72741 Y61.26418
G01 X-20.70760 Y61.24794
G01 X-20.65189 Y61.20662
G01 X-20.64029 Y61.19844
G01 X-20.62629 Y61.19603
G01 X-20.55766 Y61.18584
G01 X-20.53223 Y61.18333
G01 X-20.46360 Y61.17995
G01 X-20.45133 Y61.17967
G01 X-17.66193 Y61.17967
G01 X-17.64961 Y61.17936
G01 X-17.58101 Y61.17599
G01 X-17.55556 Y61.17347
G01 X-17.48693 Y61.16329
G01 X-17.45868 Y61.15765
G01 X-17.39008 Y61.14048
G01 X-17.35688 Y61.13039
G01 X-17.28825 Y61.10583
G01 X-17.26838 Y61.09816
G01 X-16.58391 Y60.81465
G01 X-15.36387 Y60.81465
G01 X-14.41337 Y59.86413
G01 X-13.68894 Y59.13972
G01 X-13.69359 Y59.09265
G01 X-13.69359 Y58.99659
G01 X-13.67820 Y58.84053
G01 X-13.65948 Y58.74632
G01 X-13.61393 Y58.59624
G01 X-13.57718 Y58.50749
G01 X-13.50327 Y58.36918
G01 X-13.44988 Y58.28933
G01 X-13.35041 Y58.16809
G01 X-13.28246 Y58.10017
G01 X-13.25844 Y58.08044
G01 X-13.16126 Y58.00068
G01 X-13.08137 Y57.94732
G01 X-12.94307 Y57.87338
G01 X-12.85432 Y57.83662
G01 X-12.70426 Y57.79111
G01 X-12.61005 Y57.77236
G01 X-12.45397 Y57.75699
G01 X-12.35790 Y57.75699
G01 X-12.31084 Y57.76162
G01 X-11.65877 Y57.10960
G01 X-11.59562 Y57.07592
G01 X-11.45694 Y56.99278
G01 X-11.38691 Y56.94602
G01 X-11.25958 Y56.85159
G01 X-11.20071 Y56.80330
G01 X-11.08437 Y56.69786
G01 X-11.03238 Y56.64587
G01 X-10.92694 Y56.52954
G01 X-10.87866 Y56.47066
G01 X-10.78422 Y56.34333
G01 X-10.73746 Y56.27330
G01 X-10.65433 Y56.13462
G01 X-10.62118 Y56.07417
G01 X-10.61854 Y56.06932
G01 X-10.61612 Y56.06693
G01 X-10.61793 Y56.05771
G01 X-10.61793 Y55.62670
G01 X-10.60147 Y55.54399
G01 X-10.55595 Y55.39393
G01 X-10.51917 Y55.30518
G01 X-10.44526 Y55.16688
G01 X-10.39189 Y55.08700
G01 X-10.37292 Y55.06388
G01 X-10.29240 Y54.96576
G01 X-10.22448 Y54.89784
G01 X-10.10325 Y54.79835
G01 X-10.02339 Y54.74499
G01 X-9.88506 Y54.67107
G01 X-9.79631 Y54.63432
G01 X-9.64625 Y54.58878
G01 X-9.55204 Y54.57006
G01 X-9.39596 Y54.55466
G01 X-9.29990 Y54.55466
G01 X-9.14384 Y54.57006
G01 X-9.04963 Y54.58878
G01 X-8.89954 Y54.63432
G01 X-8.81079 Y54.67107
G01 X-8.67249 Y54.74499
G01 X-8.59263 Y54.79835
G01 X-8.47140 Y54.89784
G01 X-8.40348 Y54.96576
G01 X-8.30399 Y55.08700
G01 X-8.25062 Y55.16688
G01 X-8.17668 Y55.30518
G01 X-8.13993 Y55.39393
G01 X-8.09441 Y55.54399
G01 X-8.07793 Y55.62670
G01 X-8.07793 Y56.05771
G01 X-8.06147 Y56.14061
G01 X-8.01595 Y56.29070
G01 X-7.97917 Y56.37945
G01 X-7.90526 Y56.51775
G01 X-7.85189 Y56.59761
G01 X-7.75240 Y56.71885
G01 X-7.68448 Y56.78676
G01 X-7.56325 Y56.88626
G01 X-7.48339 Y56.93962
G01 X-7.34506 Y57.01356
G01 X-7.25751 Y57.04983
G01 X-7.25631 Y57.05032
G01 X-7.10625 Y57.09583
G01 X-7.01204 Y57.11458
G01 X-6.85596 Y57.12994
G01 X-6.75990 Y57.12994
G01 X-6.74163 Y57.12817
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.55794 Y55.15436 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.55794 Y55.15436
G01 X-5.56541 Y55.16497
G01 X-5.65665 Y55.18248
G01 X-5.70028 Y55.18618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.55789 Y55.53246 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.55789 Y55.53246
G01 X-5.59993 Y55.39393
G01 X-5.63668 Y55.30518
G01 X-5.70028 Y55.18618
G01 X-5.71857 Y55.17625
G01 X-5.81090 Y55.12555
G01 X-5.94613 Y55.03366
G01 X-5.95606 Y55.02535
G01 X-6.00486 Y54.98776
G01 X-6.09205 Y54.91560
G01 X-6.09216 Y54.91534
G01 X-6.11776 Y54.85652
G01 X-6.12154 Y54.84801
G01 X-6.13079 Y54.82746
G01 X-6.14849 Y54.78448
G01 X-6.15202 Y54.77508
G01 X-6.17491 Y54.72091
G01 X-6.18959 Y54.68984
G01 X-6.20724 Y54.66040
G01 X-6.24552 Y54.60313
G01 X-6.26602 Y54.57549
G01 X-6.28903 Y54.55009
G01 X-6.31276 Y54.52520
G01 X-8.36678 Y52.47118
G01 X-8.39167 Y52.44745
G01 X-8.41715 Y52.42439
G01 X-8.44470 Y52.40394
G01 X-8.46025 Y52.39274
G01 X-8.50198 Y52.36567
G01 X-8.53145 Y52.34801
G01 X-8.56248 Y52.33333
G01 X-8.56828 Y52.33061
G01 X-8.62609 Y52.30699
G01 X-8.65839 Y52.29544
G01 X-8.69174 Y52.28708
G01 X-8.75921 Y52.27364
G01 X-8.79322 Y52.26861
G01 X-8.82751 Y52.26691
G01 X-8.86195 Y52.26607
G01 X-10.67178 Y52.26607
G01 X-10.78267 Y52.25728
G01 X-10.84386 Y52.24761
G01 X-10.84983 Y52.24664
G01 X-10.95816 Y52.16417
G01 X-10.96957 Y52.15363
G01 X-10.98945 Y52.13450
G01 X-11.44251 Y51.68144
G01 X-11.51470 Y51.59683
G01 X-11.55110 Y51.54672
G01 X-11.58237 Y51.50016
G01 X-11.58996 Y51.32107
G01 X-11.58516 Y51.25988
G01 X-11.56133 Y51.12094
G01 X-11.54858 Y51.11116
G01 X-11.50736 Y51.08142
G01 X-11.50657 Y51.08088
G01 X-11.47282 Y51.05680
G01 X-11.44645 Y51.03689
G01 X-11.41155 Y51.01210
G01 X-11.40606 Y51.00847
G01 X-11.35044 Y50.96735
G01 X-11.31252 Y50.93631
G01 X-11.28641 Y50.91385
G01 X-11.26403 Y50.88784
G01 X-11.23299 Y50.84992
G01 X-11.20944 Y50.81949
G01 X-11.19446 Y50.79257
G01 X-11.17157 Y50.74924
G01 X-11.15308 Y50.71154
G01 X-11.14500 Y50.68591
G01 X-11.13114 Y50.63892
G01 X-11.11912 Y50.59226
G01 X-11.11686 Y50.57154
G01 X-11.11277 Y50.52787
G01 X-11.11252 Y50.52269
G01 X-11.11168 Y50.48830
G01 X-11.11168 Y49.03834
G01 X-11.11252 Y49.00393
G01 X-11.11277 Y48.99879
G01 X-11.11483 Y48.97695
G01 X-11.11686 Y48.95513
G01 X-11.11912 Y48.93435
G01 X-11.13114 Y48.88780
G01 X-11.14498 Y48.84078
G01 X-11.15308 Y48.81510
G01 X-11.17160 Y48.77733
G01 X-11.19448 Y48.73402
G01 X-11.20944 Y48.70715
G01 X-11.23291 Y48.67682
G01 X-11.26395 Y48.63888
G01 X-11.30731 Y48.59062
G01 X-11.31028 Y48.58762
G01 X-11.34378 Y48.55120
G01 X-11.38486 Y48.50334
G01 X-11.39321 Y48.49377
G01 X-11.42788 Y48.45462
G01 X-11.48834 Y48.38643
G01 X-11.50601 Y48.36598
G01 X-11.43545 Y48.20924
G01 X-11.40385 Y48.15430
G01 X-11.31361 Y48.02933
G01 X-11.29954 Y48.01366
G01 X-11.27393 Y47.98666
G01 X-9.15677 Y45.86949
G01 X-9.13307 Y45.84460
G01 X-9.10998 Y45.81912
G01 X-9.08953 Y45.79154
G01 X-9.05126 Y45.73426
G01 X-9.03360 Y45.70480
G01 X-9.01892 Y45.67376
G01 X-8.99258 Y45.61018
G01 X-8.98979 Y45.60238
G01 X-8.96695 Y45.54627
G01 X-8.94491 Y45.49804
G01 X-8.93663 Y45.47929
G01 X-8.91956 Y45.43921
G01 X-8.90792 Y45.41315
G01 X-8.89400 Y45.38333
G01 X-8.72415 Y45.33970
G01 X-8.67041 Y45.33225
G01 X-8.57358 Y45.32557
G01 X-8.45194 Y45.32557
G01 X-8.41128 Y45.32441
G01 X-8.39378 Y45.32235
G01 X-8.30765 Y45.29588
G01 X-8.23515 Y45.25204
G01 X-8.17521 Y45.19210
G01 X-8.13137 Y45.11960
G01 X-8.10490 Y45.03347
G01 X-8.10285 Y45.01597
G01 X-8.10168 Y44.97531
G01 X-8.10168 Y43.37534
G01 X-8.10285 Y43.33467
G01 X-8.10490 Y43.31717
G01 X-8.13137 Y43.23101
G01 X-8.16342 Y43.17612
G01 X-8.17518 Y43.15857
G01 X-8.23515 Y43.09858
G01 X-8.27539 Y43.07280
G01 X-8.37336 Y43.01458
G01 X-8.43094 Y42.98349
G01 X-8.45194 Y42.97320
G01 X-8.58659 Y42.88532
G01 X-8.81194 Y42.88532
G01 X-8.81194 Y42.84585
G01 X-8.80356 Y42.84331
G01 X-8.71481 Y42.80655
G01 X-8.62327 Y42.75763
G01 X-8.59431 Y42.70432
G01 X-8.59294 Y42.70180
G01 X-8.54704 Y42.61786
G01 X-8.45916 Y42.48801
G01 X-8.45489 Y42.48293
G01 X-8.42515 Y42.44478
G01 X-8.41168 Y42.42632
G01 X-8.38108 Y42.38723
G01 X-8.31552 Y42.30236
G01 X-8.27612 Y42.24582
G01 X-8.27046 Y42.23676
G01 X-8.20282 Y42.10719
G01 X-8.18761 Y42.07620
G01 X-8.17643 Y42.04349
G01 X-8.13264 Y41.90404
G01 X-8.13025 Y41.89363
G01 X-8.11814 Y41.82578
G01 X-8.10526 Y41.72558
G01 X-8.10252 Y41.66973
G01 X-8.10252 Y41.60092
G01 X-8.10526 Y41.54509
G01 X-8.11814 Y41.44489
G01 X-8.13025 Y41.37704
G01 X-8.13264 Y41.36660
G01 X-8.17643 Y41.22716
G01 X-8.18761 Y41.19444
G01 X-8.20282 Y41.16345
G01 X-8.27041 Y41.03396
G01 X-8.27615 Y41.02482
G01 X-8.31552 Y40.96828
G01 X-8.37732 Y40.88832
G01 X-8.41483 Y40.84689
G01 X-8.46350 Y40.79823
G01 X-8.50490 Y40.76071
G01 X-8.54399 Y40.73051
G01 X-8.58369 Y40.69747
G01 X-8.62845 Y40.65733
G01 X-8.63650 Y40.65022
G01 X-8.67569 Y40.61606
G01 X-8.75410 Y40.53755
G01 X-8.81557 Y40.46716
G01 X-8.86137 Y40.41017
G01 X-8.86137 Y40.41014
G01 X-8.86286 Y40.39592
G01 X-8.86286 Y40.33473
G01 X-8.86137 Y40.32050
G01 X-8.81562 Y40.26358
G01 X-8.75405 Y40.19307
G01 X-8.67577 Y40.11466
G01 X-8.63645 Y40.08040
G01 X-8.62850 Y40.07336
G01 X-8.58369 Y40.03318
G01 X-8.54399 Y40.00013
G01 X-8.50490 Y39.96993
G01 X-8.46350 Y39.93242
G01 X-8.41483 Y39.88375
G01 X-8.37729 Y39.84232
G01 X-8.31552 Y39.76236
G01 X-8.27612 Y39.70582
G01 X-8.27046 Y39.69676
G01 X-8.20282 Y39.56719
G01 X-8.18761 Y39.53620
G01 X-8.17643 Y39.50349
G01 X-8.13264 Y39.36404
G01 X-8.13025 Y39.35363
G01 X-8.11814 Y39.28578
G01 X-8.10526 Y39.18558
G01 X-8.10252 Y39.12973
G01 X-8.10252 Y39.06092
G01 X-8.10526 Y39.00509
G01 X-8.11814 Y38.90489
G01 X-8.13025 Y38.83704
G01 X-8.13264 Y38.82660
G01 X-8.17643 Y38.68716
G01 X-8.18758 Y38.65447
G01 X-8.20282 Y38.62345
G01 X-8.26294 Y38.50826
G01 X-8.27049 Y38.49384
G01 X-8.27615 Y38.48482
G01 X-8.31552 Y38.42828
G01 X-8.37732 Y38.34832
G01 X-8.41483 Y38.30689
G01 X-8.46350 Y38.25823
G01 X-8.50490 Y38.22071
G01 X-8.54399 Y38.19051
G01 X-8.58369 Y38.15747
G01 X-8.62845 Y38.11733
G01 X-8.63650 Y38.11022
G01 X-8.67569 Y38.07606
G01 X-8.75410 Y37.99755
G01 X-8.81557 Y37.92716
G01 X-8.86137 Y37.87017
G01 X-8.86137 Y37.87014
G01 X-8.86286 Y37.85592
G01 X-8.86286 Y37.79473
G01 X-8.86137 Y37.78050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.03640 Y37.82531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.03640 Y37.82531
G01 X-8.95362 Y37.84179
G01 X-8.86177 Y37.86966
G01 X-8.86137 Y37.87014
G01 X-8.81557 Y37.92716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.26741 Y40.36531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.26741 Y40.36531
G01 X-10.35024 Y40.34885
G01 X-10.50033 Y40.30331
G01 X-10.58907 Y40.26655
G01 X-10.72738 Y40.19264
G01 X-10.80723 Y40.13927
G01 X-10.92847 Y40.03978
G01 X-10.99639 Y39.97186
G01 X-11.09588 Y39.85063
G01 X-11.14925 Y39.77075
G01 X-11.22318 Y39.63244
G01 X-11.25994 Y39.54370
G01 X-11.30546 Y39.39363
G01 X-11.32420 Y39.29942
G01 X-11.33957 Y39.14334
G01 X-11.33957 Y39.04728
G01 X-11.32420 Y38.89122
G01 X-11.30546 Y38.79701
G01 X-11.25994 Y38.64692
G01 X-11.22318 Y38.55818
G01 X-11.14925 Y38.41987
G01 X-11.09588 Y38.34001
G01 X-10.99639 Y38.21878
G01 X-10.92847 Y38.15086
G01 X-10.80723 Y38.05137
G01 X-10.72738 Y37.99800
G01 X-10.58907 Y37.92406
G01 X-10.50033 Y37.88731
G01 X-10.35024 Y37.84179
G01 X-10.26741 Y37.82531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.03640 Y35.28533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.03640 Y35.28533
G01 X-8.95362 Y35.26885
G01 X-8.80356 Y35.22331
G01 X-8.71481 Y35.18655
G01 X-8.57650 Y35.11264
G01 X-8.49662 Y35.05927
G01 X-8.37539 Y34.95978
G01 X-8.30747 Y34.89186
G01 X-8.20798 Y34.77063
G01 X-8.15461 Y34.69075
G01 X-8.08070 Y34.55244
G01 X-8.04394 Y34.46370
G01 X-7.99840 Y34.31363
G01 X-7.97968 Y34.21942
G01 X-7.96749 Y34.09588
G01 X-7.96429 Y34.06334
G01 X-7.96429 Y33.96728
G01 X-7.97968 Y33.81122
G01 X-7.99840 Y33.71701
G01 X-8.04394 Y33.56692
G01 X-8.08070 Y33.47818
G01 X-8.15461 Y33.33987
G01 X-8.20798 Y33.26001
G01 X-8.30747 Y33.13878
G01 X-8.37539 Y33.07086
G01 X-8.49662 Y32.97137
G01 X-8.57650 Y32.91800
G01 X-8.71481 Y32.84406
G01 X-8.80356 Y32.80731
G01 X-8.95362 Y32.76179
G01 X-9.03640 Y32.74533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.65817 Y32.61628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.65817 Y32.61628
G01 X-8.71481 Y32.64655
G01 X-8.80356 Y32.68331
G01 X-8.95362 Y32.72885
G01 X-9.03640 Y32.74533
G01 X-10.26741 Y32.74533
G01 X-10.35024 Y32.76179
G01 X-10.50033 Y32.80731
G01 X-10.58907 Y32.84406
G01 X-10.72738 Y32.91800
G01 X-10.80723 Y32.97137
G01 X-10.92847 Y33.07086
G01 X-10.99639 Y33.13878
G01 X-11.09588 Y33.26001
G01 X-11.14925 Y33.33987
G01 X-11.22318 Y33.47818
G01 X-11.25994 Y33.56692
G01 X-11.30546 Y33.71701
G01 X-11.32420 Y33.81122
G01 X-11.33957 Y33.96728
G01 X-11.33957 Y34.06334
G01 X-11.32420 Y34.21942
G01 X-11.30546 Y34.31363
G01 X-11.25994 Y34.46370
G01 X-11.22318 Y34.55244
G01 X-11.14925 Y34.69075
G01 X-11.09588 Y34.77063
G01 X-10.99639 Y34.89186
G01 X-10.92847 Y34.95978
G01 X-10.80723 Y35.05927
G01 X-10.72738 Y35.11264
G01 X-10.58907 Y35.18655
G01 X-10.50033 Y35.22331
G01 X-10.35024 Y35.26885
G01 X-10.26741 Y35.28533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.82966 Y31.82464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.82966 Y31.82464
G01 X-14.77296 Y30.88136
G01 X-14.80860 Y30.84905
G01 X-14.86163 Y30.80554
G01 X-14.94149 Y30.75217
G01 X-15.00199 Y30.71981
G01 X-15.09074 Y30.68306
G01 X-15.15640 Y30.66314
G01 X-15.25061 Y30.64440
G01 X-15.31891 Y30.63769
G01 X-15.36694 Y30.63533
G01 X-15.89747 Y30.63533
G01 X-15.92747 Y30.59878
G01 X-15.99539 Y30.53086
G01 X-16.11662 Y30.43137
G01 X-16.19648 Y30.37800
G01 X-16.33481 Y30.30406
G01 X-16.42356 Y30.26731
G01 X-16.43194 Y30.26477
G01 X-16.43194 Y30.14585
G01 X-16.42356 Y30.14331
G01 X-16.33481 Y30.10655
G01 X-16.19648 Y30.03264
G01 X-16.11662 Y29.97927
G01 X-15.99539 Y29.87978
G01 X-15.92747 Y29.81186
G01 X-15.82798 Y29.69063
G01 X-15.77459 Y29.61075
G01 X-15.70067 Y29.47244
G01 X-15.66394 Y29.38370
G01 X-15.61840 Y29.23366
G01 X-15.59968 Y29.13942
G01 X-15.58429 Y28.98334
G01 X-15.58429 Y28.88730
G01 X-15.59734 Y28.75484
G01 X-15.59968 Y28.73125
G01 X-15.61840 Y28.63701
G01 X-15.66394 Y28.48692
G01 X-15.70067 Y28.39818
G01 X-15.71291 Y28.37534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.10499 Y24.90822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.10499 Y24.90822
G01 X-14.12574 Y24.91131
G01 X-14.32211 Y24.91131
G01 X-14.34284 Y24.90822
G01 X-14.31899 Y24.88434
G01 X-14.27197 Y24.88896
G01 X-14.17591 Y24.88896
G01 X-14.12887 Y24.88434
G01 X-14.10499 Y24.90822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-15.50695 Y23.50624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.50695 Y23.50624
G01 X-15.51157 Y23.55328
G01 X-15.51157 Y23.64934
G01 X-15.50695 Y23.69641
G01 X-15.62739 Y23.81685
G01 X-15.67723 Y23.77830
G01 X-15.75990 Y23.73641
G01 X-15.81688 Y23.71403
G01 X-15.91573 Y23.68673
G01 X-16.01810 Y23.68061
G01 X-16.11949 Y23.69592
G01 X-16.17870 Y23.71134
G01 X-16.27451 Y23.74733
G01 X-16.36074 Y23.80243
G01 X-16.37590 Y23.81739
G01 X-16.49691 Y23.69636
G01 X-16.49229 Y23.64934
G01 X-16.49229 Y23.55328
G01 X-16.49691 Y23.50626
G01 X-16.37644 Y23.38582
G01 X-16.32653 Y23.42442
G01 X-16.24382 Y23.46631
G01 X-16.18688 Y23.48866
G01 X-16.08810 Y23.51591
G01 X-15.98586 Y23.52204
G01 X-15.88457 Y23.50677
G01 X-15.82533 Y23.49138
G01 X-15.72945 Y23.45539
G01 X-15.64311 Y23.40022
G01 X-15.62793 Y23.38526
G01 X-15.50695 Y23.50624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.21092 Y28.37534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.21092 Y28.37534
G01 X-15.71291 Y28.37534
G01 X-15.84383 Y28.29685
G01 X-15.92033 Y28.25583
G01 X-16.07718 Y28.18169
G01 X-16.13295 Y28.15848
G01 X-16.28980 Y28.10237
G01 X-16.33107 Y28.08984
G01 X-16.48792 Y28.05053
G01 X-16.51964 Y28.04420
G01 X-16.67646 Y28.02093
G01 X-16.70278 Y28.01834
G01 X-16.85965 Y28.01062
G01 X-16.87192 Y28.01032
G01 X-17.67194 Y28.01032
G01 X-17.68421 Y28.01062
G01 X-17.84103 Y28.01834
G01 X-17.86737 Y28.02093
G01 X-18.02421 Y28.04420
G01 X-18.05594 Y28.05053
G01 X-18.18512 Y28.08291
G01 X-18.20755 Y28.09955
G01 X-18.23673 Y28.12347
G01 X-18.35309 Y28.22891
G01 X-18.37834 Y28.25416
G01 X-18.48377 Y28.37051
G01 X-18.50773 Y28.39972
G01 X-18.52436 Y28.42215
G01 X-18.55672 Y28.55131
G01 X-18.56305 Y28.58306
G01 X-18.58631 Y28.73988
G01 X-18.58891 Y28.76625
G01 X-18.59663 Y28.92304
G01 X-18.59663 Y28.94760
G01 X-18.58891 Y29.10445
G01 X-18.58631 Y29.13079
G01 X-18.56305 Y29.28761
G01 X-18.55672 Y29.31936
G01 X-18.51743 Y29.47615
G01 X-18.50488 Y29.51745
G01 X-18.44877 Y29.67430
G01 X-18.42558 Y29.73008
G01 X-18.35142 Y29.88689
G01 X-18.31039 Y29.96340
G01 X-18.23193 Y30.09434
G01 X-18.23188 Y30.31626
G01 X-18.31037 Y30.44717
G01 X-18.35142 Y30.52375
G01 X-18.42558 Y30.68057
G01 X-18.44877 Y30.73635
G01 X-18.50488 Y30.89319
G01 X-18.51743 Y30.93449
G01 X-18.55672 Y31.09131
G01 X-18.56305 Y31.12304
G01 X-18.58631 Y31.27988
G01 X-18.58891 Y31.30622
G01 X-18.59663 Y31.46304
G01 X-18.59663 Y31.48760
G01 X-18.58891 Y31.64445
G01 X-18.58631 Y31.67079
G01 X-18.56305 Y31.82761
G01 X-18.55672 Y31.85933
G01 X-18.53018 Y31.96533
G01 X-18.52584 Y31.98463
G01 X-18.51936 Y32.01717
G01 X-18.51006 Y32.05517
G01 X-18.50851 Y32.06045
G01 X-18.49802 Y32.10355
G01 X-18.48286 Y32.17985
G01 X-18.47425 Y32.23520
G01 X-18.47295 Y32.24655
G01 X-18.46224 Y32.31470
G01 X-18.45881 Y32.33190
G01 X-18.44349 Y32.43675
G01 X-18.43607 Y32.51198
G01 X-18.42723 Y32.51927
G01 X-18.34738 Y32.57264
G01 X-18.20907 Y32.64655
G01 X-18.12033 Y32.68331
G01 X-17.97024 Y32.72885
G01 X-17.88741 Y32.74533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.65637 Y32.74533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.65637 Y32.74533
G01 X-16.57362 Y32.72885
G01 X-16.42356 Y32.68331
G01 X-16.33481 Y32.64655
G01 X-16.19648 Y32.57264
G01 X-16.11662 Y32.51927
G01 X-15.99539 Y32.41978
G01 X-15.92747 Y32.35186
G01 X-15.89750 Y32.31531
G01 X-15.71487 Y32.31531
G01 X-15.03593 Y32.99425
G01 X-15.03593 Y44.49037
G01 X-17.90590 Y47.36037
G01 X-17.93821 Y47.39600
G01 X-17.98172 Y47.44904
G01 X-18.03508 Y47.52890
G01 X-18.06744 Y47.58940
G01 X-18.10420 Y47.67815
G01 X-18.12411 Y47.74381
G01 X-18.14286 Y47.83801
G01 X-18.14956 Y47.90632
G01 X-18.15192 Y47.95432
G01 X-18.15192 Y48.59948
G01 X-18.22383 Y48.65849
G01 X-18.29175 Y48.72643
G01 X-18.31692 Y48.75709
G01 X-18.39747 Y48.85523
G01 X-18.45083 Y48.93509
G01 X-18.52937 Y49.08206
G01 X-18.56193 Y49.16064
G01 X-18.56193 Y50.36595
G01 X-18.52937 Y50.44459
G01 X-18.45083 Y50.59153
G01 X-18.39747 Y50.67141
G01 X-18.29175 Y50.80021
G01 X-18.22383 Y50.86813
G01 X-18.09503 Y50.97385
G01 X-18.01514 Y51.02721
G01 X-17.95690 Y51.05833
G01 X-17.95690 Y55.02002
G01 X-18.01189 Y55.08700
G01 X-18.06526 Y55.16688
G01 X-18.13917 Y55.30518
G01 X-18.17595 Y55.39393
G01 X-18.22147 Y55.54399
G01 X-18.23793 Y55.62670
G01 X-18.23793 Y56.05771
G01 X-18.22147 Y56.14061
G01 X-18.17595 Y56.29070
G01 X-18.13917 Y56.37945
G01 X-18.06526 Y56.51775
G01 X-18.01189 Y56.59761
G01 X-17.91240 Y56.71885
G01 X-17.84448 Y56.78676
G01 X-17.72325 Y56.88626
G01 X-17.64339 Y56.93962
G01 X-17.50506 Y57.01356
G01 X-17.41631 Y57.05032
G01 X-17.26625 Y57.09583
G01 X-17.17204 Y57.11458
G01 X-17.01596 Y57.12994
G01 X-16.91990 Y57.12994
G01 X-16.76384 Y57.11458
G01 X-16.66961 Y57.09583
G01 X-16.51952 Y57.05032
G01 X-16.43079 Y57.01356
G01 X-16.29249 Y56.93962
G01 X-16.21261 Y56.88626
G01 X-16.09140 Y56.78676
G01 X-16.02345 Y56.71885
G01 X-15.94291 Y56.62067
G01 X-15.92396 Y56.59761
G01 X-15.87062 Y56.51775
G01 X-15.79668 Y56.37945
G01 X-15.75990 Y56.29070
G01 X-15.71439 Y56.14061
G01 X-15.69790 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-15.69790 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.69790 Y55.62670
G01 X-15.68147 Y55.54399
G01 X-15.63595 Y55.39393
G01 X-15.59915 Y55.30518
G01 X-15.52523 Y55.16688
G01 X-15.47189 Y55.08700
G01 X-15.37238 Y54.96576
G01 X-15.30448 Y54.89784
G01 X-15.18325 Y54.79835
G01 X-15.10339 Y54.74499
G01 X-14.96506 Y54.67107
G01 X-14.87631 Y54.63432
G01 X-14.72625 Y54.58878
G01 X-14.63204 Y54.57006
G01 X-14.47596 Y54.55466
G01 X-14.37990 Y54.55466
G01 X-14.22384 Y54.57006
G01 X-14.12963 Y54.58878
G01 X-13.97954 Y54.63432
G01 X-13.89079 Y54.67107
G01 X-13.75249 Y54.74499
G01 X-13.67263 Y54.79835
G01 X-13.55140 Y54.89784
G01 X-13.48348 Y54.96576
G01 X-13.38399 Y55.08700
G01 X-13.33062 Y55.16688
G01 X-13.25668 Y55.30518
G01 X-13.21993 Y55.39393
G01 X-13.17441 Y55.54399
G01 X-13.15790 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.15790 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.15790 Y56.05771
G01 X-13.17441 Y56.14061
G01 X-13.21993 Y56.29070
G01 X-13.25668 Y56.37945
G01 X-13.33062 Y56.51775
G01 X-13.38399 Y56.59761
G01 X-13.40291 Y56.62067
G01 X-13.48348 Y56.71885
G01 X-13.55140 Y56.78676
G01 X-13.58792 Y56.81674
G01 X-13.58792 Y57.47063
G01 X-13.59029 Y57.51867
G01 X-13.59699 Y57.58697
G01 X-13.61574 Y57.68117
G01 X-13.63565 Y57.74683
G01 X-13.67243 Y57.83558
G01 X-13.70476 Y57.89608
G01 X-13.75813 Y57.97594
G01 X-13.80167 Y58.02900
G01 X-13.83395 Y58.06461
G01 X-14.67893 Y58.90960
G01 X-14.67431 Y58.95661
G01 X-14.67431 Y59.05265
G01 X-14.68968 Y59.20873
G01 X-14.70842 Y59.30294
G01 X-14.75394 Y59.45300
G01 X-14.79069 Y59.54175
G01 X-14.86463 Y59.68008
G01 X-14.91800 Y59.75994
G01 X-15.01749 Y59.88117
G01 X-15.08541 Y59.94909
G01 X-15.20662 Y60.04858
G01 X-15.28650 Y60.10195
G01 X-15.39409 Y60.15948
G01 X-15.42480 Y60.17586
G01 X-15.51352 Y60.21264
G01 X-15.66364 Y60.25816
G01 X-15.75785 Y60.27690
G01 X-15.91388 Y60.29227
G01 X-16.00997 Y60.29227
G01 X-16.05696 Y60.28765
G01 X-16.58391 Y60.81465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.52706 Y59.86466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.52706 Y59.86466
G01 X-18.47400 Y59.79994
G01 X-18.42063 Y59.72006
G01 X-18.34669 Y59.58176
G01 X-18.30994 Y59.49301
G01 X-18.26442 Y59.34294
G01 X-18.24568 Y59.24874
G01 X-18.23031 Y59.09265
G01 X-18.23031 Y58.99659
G01 X-18.24568 Y58.84053
G01 X-18.26442 Y58.74632
G01 X-18.30994 Y58.59624
G01 X-18.34669 Y58.50749
G01 X-18.42063 Y58.36918
G01 X-18.47400 Y58.28933
G01 X-18.57349 Y58.16809
G01 X-18.64141 Y58.10017
G01 X-18.66792 Y58.07841
G01 X-18.66792 Y56.81674
G01 X-18.63140 Y56.78676
G01 X-18.56348 Y56.71885
G01 X-18.48291 Y56.62067
G01 X-18.46399 Y56.59761
G01 X-18.41062 Y56.51775
G01 X-18.33668 Y56.37945
G01 X-18.29993 Y56.29070
G01 X-18.25441 Y56.14061
G01 X-18.23793 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.23793 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.23793 Y55.62670
G01 X-18.25441 Y55.54399
G01 X-18.29993 Y55.39393
G01 X-18.33668 Y55.30518
G01 X-18.41062 Y55.16688
G01 X-18.46399 Y55.08700
G01 X-18.56348 Y54.96576
G01 X-18.63140 Y54.89784
G01 X-18.75263 Y54.79835
G01 X-18.83249 Y54.74499
G01 X-18.97079 Y54.67107
G01 X-19.05954 Y54.63432
G01 X-19.20963 Y54.58878
G01 X-19.30384 Y54.57006
G01 X-19.45990 Y54.55466
G01 X-19.55596 Y54.55466
G01 X-19.71204 Y54.57006
G01 X-19.80625 Y54.58878
G01 X-19.95631 Y54.63432
G01 X-20.04506 Y54.67107
G01 X-20.18339 Y54.74499
G01 X-20.26325 Y54.79835
G01 X-20.38448 Y54.89784
G01 X-20.45240 Y54.96576
G01 X-20.53292 Y55.06388
G01 X-20.55189 Y55.08700
G01 X-20.60526 Y55.16688
G01 X-20.67917 Y55.30518
G01 X-20.71595 Y55.39393
G01 X-20.76147 Y55.54399
G01 X-20.77793 Y55.62670
G01 X-20.77793 Y56.05771
G01 X-20.79441 Y56.14061
G01 X-20.83993 Y56.29070
G01 X-20.87668 Y56.37945
G01 X-20.95062 Y56.51775
G01 X-21.00399 Y56.59761
G01 X-21.02291 Y56.62067
G01 X-21.10348 Y56.71885
G01 X-21.17140 Y56.78676
G01 X-21.29263 Y56.88626
G01 X-21.37249 Y56.93962
G01 X-21.51079 Y57.01356
G01 X-21.59954 Y57.05032
G01 X-21.74963 Y57.09583
G01 X-21.84384 Y57.11458
G01 X-21.99990 Y57.12994
G01 X-22.09596 Y57.12994
G01 X-22.25204 Y57.11458
G01 X-22.34625 Y57.09583
G01 X-22.49631 Y57.05032
G01 X-22.58506 Y57.01356
G01 X-22.72339 Y56.93962
G01 X-22.80325 Y56.88626
G01 X-22.92448 Y56.78676
G01 X-22.99240 Y56.71885
G01 X-23.09189 Y56.59761
G01 X-23.14526 Y56.51775
G01 X-23.21917 Y56.37945
G01 X-23.25595 Y56.29070
G01 X-23.30147 Y56.14061
G01 X-23.32021 Y56.04641
G01 X-23.33558 Y55.89035
G01 X-23.33558 Y55.79429
G01 X-23.32021 Y55.63820
G01 X-23.30147 Y55.54399
G01 X-23.25595 Y55.39393
G01 X-23.21917 Y55.30518
G01 X-23.14526 Y55.16688
G01 X-23.09189 Y55.08700
G01 X-22.99240 Y54.96576
G01 X-22.92448 Y54.89784
G01 X-22.88791 Y54.86785
G01 X-22.88791 Y54.34130
G01 X-22.88554 Y54.29330
G01 X-22.87884 Y54.22500
G01 X-22.86009 Y54.13079
G01 X-22.84018 Y54.06513
G01 X-22.80343 Y53.97638
G01 X-22.77107 Y53.91588
G01 X-22.71770 Y53.83602
G01 X-22.67419 Y53.78299
G01 X-22.64188 Y53.74735
G01 X-20.65192 Y51.75739
G01 X-20.65192 Y50.92714
G01 X-20.72383 Y50.86813
G01 X-20.79175 Y50.80021
G01 X-20.89746 Y50.67141
G01 X-20.95083 Y50.59153
G01 X-21.02939 Y50.44459
G01 X-21.06193 Y50.36595
G01 X-21.06193 Y49.16062
G01 X-21.09449 Y49.08206
G01 X-21.17305 Y48.93509
G01 X-21.22642 Y48.85523
G01 X-21.33213 Y48.72643
G01 X-21.40005 Y48.65849
G01 X-21.47193 Y48.59951
G01 X-21.47193 Y47.77131
G01 X-21.47429 Y47.72331
G01 X-21.48100 Y47.65501
G01 X-21.49975 Y47.56080
G01 X-21.51966 Y47.49514
G01 X-21.55641 Y47.40639
G01 X-21.58877 Y47.34589
G01 X-21.64214 Y47.26603
G01 X-21.68565 Y47.21300
G01 X-21.71796 Y47.17736
G01 X-23.03594 Y45.85938
G01 X-23.03594 Y45.21132
G01 X-22.67594 Y45.21132
G01 X-22.58034 Y45.20190
G01 X-22.48841 Y45.17401
G01 X-22.40371 Y45.12872
G01 X-22.32946 Y45.06779
G01 X-22.26853 Y44.99354
G01 X-22.22324 Y44.90884
G01 X-22.19535 Y44.81691
G01 X-22.18593 Y44.72131
G01 X-22.18593 Y43.12131
G01 X-22.19535 Y43.02573
G01 X-22.22324 Y42.93381
G01 X-22.26853 Y42.84907
G01 X-22.32946 Y42.77483
G01 X-22.40371 Y42.71389
G01 X-22.48841 Y42.66861
G01 X-22.58034 Y42.64072
G01 X-22.67594 Y42.63132
G01 X-23.03594 Y42.63132
G01 X-23.03594 Y42.59185
G01 X-23.02756 Y42.58931
G01 X-22.93881 Y42.55255
G01 X-22.80050 Y42.47864
G01 X-22.72062 Y42.42527
G01 X-22.59939 Y42.32578
G01 X-22.53147 Y42.25786
G01 X-22.43198 Y42.13663
G01 X-22.37861 Y42.05675
G01 X-22.30470 Y41.91844
G01 X-22.26794 Y41.82970
G01 X-22.22517 Y41.68873
G01 X-22.22240 Y41.67963
G01 X-22.20368 Y41.58542
G01 X-22.18829 Y41.42934
G01 X-22.18829 Y41.33328
G01 X-22.20368 Y41.17722
G01 X-22.22240 Y41.08301
G01 X-22.26794 Y40.93292
G01 X-22.30470 Y40.84418
G01 X-22.37861 Y40.70587
G01 X-22.43198 Y40.62601
G01 X-22.53147 Y40.50478
G01 X-22.59939 Y40.43686
G01 X-22.72062 Y40.33737
G01 X-22.80050 Y40.28400
G01 X-22.93881 Y40.21006
G01 X-23.02756 Y40.17331
G01 X-23.17762 Y40.12779
G01 X-23.26040 Y40.11133
G01 X-24.49141 Y40.11133
G01 X-24.57424 Y40.09485
G01 X-24.72433 Y40.04931
G01 X-24.81307 Y40.01255
G01 X-24.95138 Y39.93864
G01 X-25.03123 Y39.88527
G01 X-25.15247 Y39.78578
G01 X-25.22039 Y39.71786
G01 X-25.31988 Y39.59663
G01 X-25.37325 Y39.51675
G01 X-25.44718 Y39.37844
G01 X-25.48394 Y39.28970
G01 X-25.52946 Y39.13963
G01 X-25.54820 Y39.04542
G01 X-25.56357 Y38.88934
G01 X-25.56357 Y38.79328
G01 X-25.54820 Y38.63722
G01 X-25.52946 Y38.54301
G01 X-25.48394 Y38.39292
G01 X-25.44718 Y38.30418
G01 X-25.37325 Y38.16587
G01 X-25.31988 Y38.08601
G01 X-25.22039 Y37.96478
G01 X-25.15247 Y37.89686
G01 X-25.03123 Y37.79737
G01 X-24.95138 Y37.74400
G01 X-24.81307 Y37.67006
G01 X-24.72433 Y37.63331
G01 X-24.57424 Y37.58779
G01 X-24.49141 Y37.57133
G01 X-23.26040 Y37.57133
G01 X-23.17762 Y37.55485
G01 X-23.02756 Y37.50931
G01 X-22.93881 Y37.47255
G01 X-22.80050 Y37.39864
G01 X-22.72062 Y37.34527
G01 X-22.59939 Y37.24578
G01 X-22.59741 Y37.24378
G01 X-21.41392 Y38.42726
G01 X-21.41392 Y40.11286
G01 X-21.45047 Y40.14286
G01 X-21.51839 Y40.21078
G01 X-21.61788 Y40.33201
G01 X-21.67125 Y40.41187
G01 X-21.74519 Y40.55017
G01 X-21.78194 Y40.63892
G01 X-21.82469 Y40.77981
G01 X-21.82746 Y40.78901
G01 X-21.84620 Y40.88322
G01 X-21.86157 Y41.03927
G01 X-21.86157 Y41.13534
G01 X-21.84620 Y41.29142
G01 X-21.82746 Y41.38563
G01 X-21.78194 Y41.53569
G01 X-21.74519 Y41.62444
G01 X-21.67125 Y41.76274
G01 X-21.61788 Y41.84262
G01 X-21.51839 Y41.96386
G01 X-21.45047 Y42.03178
G01 X-21.41392 Y42.06178
G01 X-21.41392 Y44.04831
G01 X-21.41156 Y44.09634
G01 X-21.40485 Y44.16464
G01 X-21.38611 Y44.25885
G01 X-21.36619 Y44.32451
G01 X-21.32944 Y44.41326
G01 X-21.29708 Y44.47376
G01 X-21.24371 Y44.55362
G01 X-21.20020 Y44.60665
G01 X-21.16789 Y44.64229
G01 X-20.99401 Y44.81620
G01 X-20.99863 Y44.86324
G01 X-20.99863 Y44.95928
G01 X-20.98326 Y45.11536
G01 X-20.96452 Y45.20957
G01 X-20.91900 Y45.35966
G01 X-20.88222 Y45.44838
G01 X-20.80831 Y45.58671
G01 X-20.75494 Y45.66657
G01 X-20.65545 Y45.78780
G01 X-20.58753 Y45.85572
G01 X-20.46630 Y45.95521
G01 X-20.38644 Y46.00858
G01 X-20.24811 Y46.08252
G01 X-20.15936 Y46.11927
G01 X-20.00930 Y46.16479
G01 X-19.91509 Y46.18353
G01 X-19.79142 Y46.19570
G01 X-19.75901 Y46.19890
G01 X-19.66297 Y46.19890
G01 X-19.50689 Y46.18353
G01 X-19.41268 Y46.16479
G01 X-19.26259 Y46.11927
G01 X-19.17387 Y46.08252
G01 X-19.03554 Y46.00858
G01 X-18.95568 Y45.95521
G01 X-18.83445 Y45.85572
G01 X-18.76653 Y45.78780
G01 X-18.66704 Y45.66657
G01 X-18.61367 Y45.58671
G01 X-18.53973 Y45.44838
G01 X-18.50298 Y45.35966
G01 X-18.45746 Y45.20957
G01 X-18.45487 Y45.19657
G01 X-18.48540 Y45.11084
G01 X-18.50409 Y45.06573
G01 X-18.53351 Y44.98382
G01 X-18.54453 Y44.94742
G01 X-18.56945 Y44.87762
G01 X-18.59020 Y44.82748
G01 X-18.61202 Y44.76670
G01 X-18.62452 Y44.72545
G01 X-18.64446 Y44.66969
G01 X-18.66597 Y44.61773
G01 X-18.68499 Y44.56462
G01 X-18.69790 Y44.52204
G01 X-18.71692 Y44.46891
G01 X-18.73844 Y44.41694
G01 X-18.75840 Y44.36111
G01 X-18.77090 Y44.31991
G01 X-18.79269 Y44.25910
G01 X-18.81347 Y44.20894
G01 X-18.83833 Y44.13924
G01 X-18.84941 Y44.10277
G01 X-18.87882 Y44.02080
G01 X-18.89746 Y43.97584
G01 X-18.92805 Y43.88997
G01 X-18.92546 Y43.87701
G01 X-18.87994 Y43.72692
G01 X-18.84318 Y43.63818
G01 X-18.79246 Y43.54328
G01 X-18.76925 Y43.49987
G01 X-18.71588 Y43.42001
G01 X-18.61639 Y43.29878
G01 X-18.54847 Y43.23086
G01 X-18.42723 Y43.13137
G01 X-18.34738 Y43.07800
G01 X-18.20907 Y43.00406
G01 X-18.12033 Y42.96731
G01 X-18.11192 Y42.96477
G01 X-18.11192 Y42.84587
G01 X-18.12033 Y42.84331
G01 X-18.20907 Y42.80655
G01 X-18.34738 Y42.73264
G01 X-18.42723 Y42.67927
G01 X-18.54847 Y42.57978
G01 X-18.61639 Y42.51186
G01 X-18.71588 Y42.39063
G01 X-18.76925 Y42.31075
G01 X-18.84318 Y42.17244
G01 X-18.87994 Y42.08370
G01 X-18.92546 Y41.93363
G01 X-18.94420 Y41.83942
G01 X-18.95957 Y41.68334
G01 X-18.95957 Y41.58728
G01 X-18.94420 Y41.43122
G01 X-18.92546 Y41.33701
G01 X-18.92472 Y41.33452
G01 X-18.92208 Y41.33193
G01 X-18.79889 Y41.21148
G01 X-18.75294 Y41.15736
G01 X-18.74649 Y41.14989
G01 X-18.71171 Y41.10999
G01 X-18.64778 Y41.02485
G01 X-18.64374 Y41.01855
G01 X-18.60834 Y40.96828
G01 X-18.54654 Y40.88830
G01 X-18.50902 Y40.84689
G01 X-18.46036 Y40.79823
G01 X-18.41895 Y40.76071
G01 X-18.37986 Y40.73051
G01 X-18.34016 Y40.69747
G01 X-18.29541 Y40.65733
G01 X-18.28736 Y40.65022
G01 X-18.24816 Y40.61606
G01 X-18.16975 Y40.53755
G01 X-18.10829 Y40.46714
G01 X-18.06206 Y40.40963
G01 X-17.97024 Y40.38179
G01 X-17.88741 Y40.36531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.06246 Y40.32050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.06246 Y40.32050
G01 X-18.06099 Y40.33473
G01 X-18.06099 Y40.39592
G01 X-18.06249 Y40.41017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.92208 Y41.33193 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.92208 Y41.33193
G01 X-18.97786 Y41.33780
G01 X-19.03904 Y41.33780
G01 X-19.14090 Y41.32708
G01 X-19.23833 Y41.29543
G01 X-19.29985 Y41.25990
G01 X-19.29988 Y41.25990
G01 X-19.31537 Y41.22815
G01 X-19.34428 Y41.16383
G01 X-19.35947 Y41.12812
G01 X-19.39101 Y41.04961
G01 X-19.41905 Y40.96668
G01 X-19.42911 Y40.93008
G01 X-19.43744 Y40.89660
G01 X-19.44473 Y40.86409
G01 X-19.45342 Y40.82939
G01 X-19.48560 Y40.71370
G01 X-19.49838 Y40.67913
G01 X-19.52540 Y40.61575
G01 X-19.56226 Y40.53986
G01 X-19.59927 Y40.47740
G01 X-19.63091 Y40.42868
G01 X-19.63719 Y40.42000
G01 X-19.66602 Y40.38070
G01 X-19.73158 Y40.30529
G01 X-19.73701 Y40.29904
G01 X-19.75517 Y40.27895
G01 X-19.78395 Y40.24834
G01 X-19.83018 Y40.19404
G01 X-19.85029 Y40.16793
G01 X-19.85664 Y40.13884
G01 X-19.87305 Y40.00603
G01 X-19.87338 Y39.99460
G01 X-19.87369 Y39.97438
G01 X-19.87369 Y38.07933
G01 X-19.87453 Y38.04487
G01 X-19.87620 Y38.01058
G01 X-19.88126 Y37.97659
G01 X-19.88347 Y37.96267
G01 X-19.89467 Y37.90915
G01 X-19.90303 Y37.87578
G01 X-19.91458 Y37.84350
G01 X-19.92004 Y37.82876
G01 X-19.93912 Y37.77895
G01 X-19.95794 Y37.72310
G01 X-19.96132 Y37.71154
G01 X-20.00579 Y37.65742
G01 X-20.05195 Y37.60651
G01 X-20.07592 Y37.58134
G01 X-20.42827 Y37.22897
G01 X-20.54438 Y37.18744
G01 X-20.60117 Y37.16397
G01 X-20.75174 Y37.09277
G01 X-20.79065 Y37.07200
G01 X-20.92934 Y36.98889
G01 X-20.95702 Y36.97040
G01 X-21.08438 Y36.87596
G01 X-21.10549 Y36.85864
G01 X-21.22182 Y36.75318
G01 X-21.23978 Y36.73522
G01 X-21.34524 Y36.61889
G01 X-21.36256 Y36.59775
G01 X-21.45700 Y36.47042
G01 X-21.47544 Y36.44276
G01 X-21.55857 Y36.30410
G01 X-21.57935 Y36.26514
G01 X-21.65057 Y36.11457
G01 X-21.67404 Y36.05777
G01 X-21.71557 Y35.94167
G01 X-21.85392 Y35.80334
G01 X-21.87909 Y35.77936
G01 X-21.93000 Y35.73321
G01 X-21.98519 Y35.68795
G01 X-22.04089 Y35.64665
G01 X-22.08529 Y35.61607
G01 X-22.10792 Y35.61513
G01 X-22.14648 Y35.61256
G01 X-22.17798 Y35.60967
G01 X-22.18227 Y35.60929
G01 X-22.24889 Y35.60553
G01 X-22.26210 Y35.60466
G01 X-22.31750 Y35.60192
G01 X-22.35194 Y35.60108
G01 X-22.36340 Y35.60108
G01 X-22.47442 Y35.59229
G01 X-22.53561 Y35.58259
G01 X-22.55707 Y35.57886
G01 X-22.63723 Y35.51160
G01 X-22.64988 Y35.49933
G01 X-22.66116 Y35.48861
G01 X-22.68140 Y35.46984
G01 X-22.68750 Y35.46423
G01 X-22.72890 Y35.42671
G01 X-22.76799 Y35.39651
G01 X-22.80769 Y35.36347
G01 X-22.85245 Y35.32333
G01 X-22.86050 Y35.31622
G01 X-22.89969 Y35.28206
G01 X-22.97810 Y35.20355
G01 X-23.03957 Y35.13316
G01 X-23.08537 Y35.07617
G01 X-23.08537 Y35.07614
G01 X-23.08686 Y35.06192
G01 X-23.08686 Y35.00073
G01 X-23.08537 Y34.98650
G01 X-23.03962 Y34.92958
G01 X-22.97805 Y34.85907
G01 X-22.89977 Y34.78066
G01 X-22.86045 Y34.74640
G01 X-22.85250 Y34.73936
G01 X-22.80769 Y34.69918
G01 X-22.76799 Y34.66613
G01 X-22.74622 Y34.64929
G01 X-22.73172 Y34.61673
G01 X-22.71008 Y34.57093
G01 X-22.68539 Y34.51152
G01 X-22.62928 Y34.35470
G01 X-22.61569 Y34.31005
G01 X-22.57640 Y34.15323
G01 X-22.56944 Y34.11823
G01 X-22.54617 Y33.96141
G01 X-22.54328 Y33.93197
G01 X-22.53556 Y33.77515
G01 X-22.53556 Y33.74749
G01 X-22.54328 Y33.59070
G01 X-22.54617 Y33.56126
G01 X-22.56944 Y33.40441
G01 X-22.57640 Y33.36941
G01 X-22.61569 Y33.21259
G01 X-22.62928 Y33.16794
G01 X-22.68539 Y33.01112
G01 X-22.71008 Y32.95171
G01 X-22.74767 Y32.87221
G01 X-22.76799 Y32.85651
G01 X-22.80769 Y32.82346
G01 X-22.85245 Y32.78333
G01 X-22.86050 Y32.77622
G01 X-22.89969 Y32.74206
G01 X-22.97810 Y32.66355
G01 X-23.03957 Y32.59316
G01 X-23.08537 Y32.53617
G01 X-23.08537 Y32.53614
G01 X-23.08686 Y32.52192
G01 X-23.08686 Y32.46073
G01 X-23.08537 Y32.44650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.03957 Y32.59316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.03957 Y32.59316
G01 X-23.08537 Y32.53614
G01 X-23.08577 Y32.53566
G01 X-23.17762 Y32.50779
G01 X-23.26040 Y32.49133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.49141 Y32.49131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.49141 Y32.49131
G01 X-24.57424 Y32.50779
G01 X-24.72433 Y32.55331
G01 X-24.81307 Y32.59006
G01 X-24.95138 Y32.66400
G01 X-25.03123 Y32.71737
G01 X-25.15247 Y32.81686
G01 X-25.22039 Y32.88478
G01 X-25.31988 Y33.00601
G01 X-25.37325 Y33.08587
G01 X-25.44718 Y33.22418
G01 X-25.48394 Y33.31292
G01 X-25.52946 Y33.46301
G01 X-25.54820 Y33.55722
G01 X-25.56357 Y33.71328
G01 X-25.56357 Y33.80934
G01 X-25.54820 Y33.96542
G01 X-25.52946 Y34.05963
G01 X-25.48394 Y34.20970
G01 X-25.44718 Y34.29844
G01 X-25.37325 Y34.43675
G01 X-25.31988 Y34.51663
G01 X-25.22039 Y34.63786
G01 X-25.15247 Y34.70578
G01 X-25.03123 Y34.80527
G01 X-24.95138 Y34.85864
G01 X-24.81307 Y34.93255
G01 X-24.72433 Y34.96931
G01 X-24.57424 Y35.01485
G01 X-24.49141 Y35.03131
G01 X-23.26040 Y35.03133
G01 X-23.17762 Y35.04779
G01 X-23.08577 Y35.07566
G01 X-23.08537 Y35.07614
G01 X-23.03957 Y35.13316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.08537 Y34.98650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.08537 Y34.98650
G01 X-23.08575 Y34.98696
G01 X-23.17762 Y35.01485
G01 X-23.26040 Y35.03133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.49141 Y35.03131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.49141 Y35.03131
G01 X-24.57424 Y35.04779
G01 X-24.72433 Y35.09331
G01 X-24.81307 Y35.13006
G01 X-24.95138 Y35.20400
G01 X-25.03123 Y35.25737
G01 X-25.15247 Y35.35686
G01 X-25.22039 Y35.42478
G01 X-25.31988 Y35.54601
G01 X-25.37325 Y35.62587
G01 X-25.44718 Y35.76418
G01 X-25.48394 Y35.85292
G01 X-25.52946 Y36.00301
G01 X-25.54820 Y36.09722
G01 X-25.56357 Y36.25328
G01 X-25.56357 Y36.34934
G01 X-25.54820 Y36.50542
G01 X-25.52946 Y36.59963
G01 X-25.48394 Y36.74970
G01 X-25.44718 Y36.83844
G01 X-25.37325 Y36.97675
G01 X-25.31988 Y37.05663
G01 X-25.22039 Y37.17786
G01 X-25.15247 Y37.24578
G01 X-25.03123 Y37.34527
G01 X-24.95138 Y37.39864
G01 X-24.81307 Y37.47255
G01 X-24.72433 Y37.50931
G01 X-24.57424 Y37.55485
G01 X-24.49141 Y37.57133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.26040 Y37.57133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.26040 Y37.57133
G01 X-23.17762 Y37.58779
G01 X-23.02756 Y37.63331
G01 X-22.93881 Y37.67006
G01 X-22.80050 Y37.74400
G01 X-22.72062 Y37.79737
G01 X-22.59939 Y37.89686
G01 X-22.53147 Y37.96478
G01 X-22.43198 Y38.08601
G01 X-22.40282 Y38.12968
G01 X-22.37861 Y38.16587
G01 X-22.30470 Y38.30418
G01 X-22.26794 Y38.39292
G01 X-22.22240 Y38.54301
G01 X-22.20368 Y38.63722
G01 X-22.18829 Y38.79328
G01 X-22.18829 Y38.88934
G01 X-22.20368 Y39.04542
G01 X-22.22240 Y39.13963
G01 X-22.26794 Y39.28970
G01 X-22.30470 Y39.37844
G01 X-22.37861 Y39.51675
G01 X-22.43198 Y39.59663
G01 X-22.53147 Y39.71786
G01 X-22.59939 Y39.78578
G01 X-22.72062 Y39.88527
G01 X-22.80050 Y39.93864
G01 X-22.93881 Y40.01255
G01 X-23.02756 Y40.04931
G01 X-23.17762 Y40.09485
G01 X-23.26040 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.31537 Y41.22815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.31537 Y41.22815
G01 X-19.29985 Y41.25990
G01 X-19.29878 Y41.26213
G01 X-19.30168 Y41.29142
G01 X-19.32040 Y41.38563
G01 X-19.36594 Y41.53569
G01 X-19.40270 Y41.62444
G01 X-19.43145 Y41.67826
G01 X-19.47661 Y41.76274
G01 X-19.52998 Y41.84262
G01 X-19.62947 Y41.96386
G01 X-19.69739 Y42.03178
G01 X-19.73394 Y42.06175
G01 X-19.73394 Y43.62362
G01 X-19.66297 Y43.62362
G01 X-19.50689 Y43.63899
G01 X-19.41268 Y43.65773
G01 X-19.26259 Y43.70325
G01 X-19.17387 Y43.74003
G01 X-19.03554 Y43.81394
G01 X-18.95568 Y43.86731
G01 X-18.92805 Y43.88997
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.45487 Y45.19657 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.45487 Y45.19657
G01 X-18.42723 Y45.21927
G01 X-18.34738 Y45.27264
G01 X-18.27166 Y45.31310
G01 X-20.40589 Y47.44736
G01 X-20.43820 Y47.48300
G01 X-20.48171 Y47.53603
G01 X-20.53508 Y47.61589
G01 X-20.56744 Y47.67639
G01 X-20.60419 Y47.76514
G01 X-20.62411 Y47.83080
G01 X-20.64285 Y47.92501
G01 X-20.64956 Y47.99331
G01 X-20.65192 Y48.04132
G01 X-20.65192 Y48.59948
G01 X-20.72383 Y48.65849
G01 X-20.79175 Y48.72643
G01 X-20.81692 Y48.75709
G01 X-20.89746 Y48.85523
G01 X-20.95083 Y48.93509
G01 X-21.02939 Y49.08206
G01 X-21.06193 Y49.16062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.56193 Y50.36595 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.56193 Y50.36595
G01 X-18.59449 Y50.44459
G01 X-18.67306 Y50.59153
G01 X-18.72642 Y50.67141
G01 X-18.83211 Y50.80021
G01 X-18.90006 Y50.86813
G01 X-18.97194 Y50.92711
G01 X-18.97194 Y52.10532
G01 X-18.97430 Y52.15335
G01 X-18.98101 Y52.22165
G01 X-18.99975 Y52.31586
G01 X-19.01966 Y52.38152
G01 X-19.05642 Y52.47026
G01 X-19.08878 Y52.53077
G01 X-19.14214 Y52.61062
G01 X-19.18565 Y52.66366
G01 X-19.21796 Y52.69930
G01 X-21.20792 Y54.68926
G01 X-21.20792 Y54.86790
G01 X-21.17140 Y54.89784
G01 X-21.10348 Y54.96576
G01 X-21.00399 Y55.08700
G01 X-20.95062 Y55.16688
G01 X-20.87668 Y55.30518
G01 X-20.83993 Y55.39393
G01 X-20.79441 Y55.54399
G01 X-20.77793 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-20.77793 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-20.77793 Y56.05771
G01 X-20.76147 Y56.14061
G01 X-20.71595 Y56.29070
G01 X-20.67917 Y56.37945
G01 X-20.60526 Y56.51775
G01 X-20.55189 Y56.59761
G01 X-20.45240 Y56.71885
G01 X-20.38448 Y56.78676
G01 X-20.34791 Y56.81679
G01 X-20.34791 Y58.06195
G01 X-20.39446 Y58.10017
G01 X-20.46241 Y58.16809
G01 X-20.49238 Y58.20464
G01 X-20.52835 Y58.20464
G01 X-20.57635 Y58.20701
G01 X-20.64465 Y58.21371
G01 X-20.73886 Y58.23246
G01 X-20.80452 Y58.25237
G01 X-20.89327 Y58.28912
G01 X-20.95377 Y58.32148
G01 X-21.03363 Y58.37485
G01 X-21.08667 Y58.41836
G01 X-21.12230 Y58.45067
G01 X-23.94488 Y61.27324
G01 X-24.18917 Y61.86298
G01 X-24.19829 Y61.88663
G01 X-24.22285 Y61.95523
G01 X-24.23512 Y61.99562
G01 X-24.25232 Y62.06422
G01 X-24.25930 Y62.09933
G01 X-24.26949 Y62.16793
G01 X-24.27266 Y62.20004
G01 X-24.27602 Y62.26864
G01 X-24.27640 Y62.28421
G01 X-24.27640 Y65.87334
G01 X-24.27602 Y65.88891
G01 X-24.27266 Y65.95754
G01 X-24.26949 Y65.98964
G01 X-24.25930 Y66.05825
G01 X-24.25232 Y66.09335
G01 X-24.23512 Y66.16196
G01 X-24.22285 Y66.20234
G01 X-24.19829 Y66.27095
G01 X-24.18917 Y66.29459
G01 X-23.94490 Y66.88428
G01 X-21.49492 Y69.33426
G01 X-21.49492 Y69.58049
G01 X-21.56683 Y69.63949
G01 X-21.63475 Y69.70741
G01 X-21.67993 Y69.76246
G01 X-21.74046 Y69.83622
G01 X-21.79383 Y69.91610
G01 X-21.87239 Y70.06304
G01 X-21.90914 Y70.15179
G01 X-21.92492 Y70.20383
G01 X-21.92492 Y71.03469
G01 X-21.90914 Y71.08684
G01 X-21.87239 Y71.17559
G01 X-21.79383 Y71.32252
G01 X-21.74046 Y71.40241
G01 X-21.63475 Y71.53121
G01 X-21.56683 Y71.59913
G01 X-21.49492 Y71.65813
G01 X-21.49492 Y72.90428
G01 X-21.57092 Y72.99689
G01 X-21.58989 Y73.02001
G01 X-21.64326 Y73.09986
G01 X-21.71719 Y73.23819
G01 X-21.75395 Y73.32691
G01 X-21.79947 Y73.47700
G01 X-21.81592 Y73.55973
G01 X-21.81592 Y74.79077
G01 X-21.79947 Y74.87362
G01 X-21.77160 Y74.96549
G01 X-21.77109 Y74.96587
G01 X-21.77109 Y74.96590
G01 X-21.71417 Y75.01162
G01 X-21.64371 Y75.07316
G01 X-21.56525 Y75.15150
G01 X-21.53104 Y75.19077
G01 X-21.52398 Y75.19877
G01 X-21.48379 Y75.24357
G01 X-21.45077 Y75.28322
G01 X-21.42057 Y75.32231
G01 X-21.38301 Y75.36374
G01 X-21.33434 Y75.41241
G01 X-21.29291 Y75.44995
G01 X-21.21295 Y75.51172
G01 X-21.15639 Y75.55114
G01 X-21.14737 Y75.55681
G01 X-21.01775 Y75.62445
G01 X-20.98677 Y75.63966
G01 X-20.95410 Y75.65081
G01 X-20.81463 Y75.69463
G01 X-20.80422 Y75.69701
G01 X-20.73642 Y75.70910
G01 X-20.63620 Y75.72198
G01 X-20.58039 Y75.72473
G01 X-20.51148 Y75.72473
G01 X-20.45565 Y75.72198
G01 X-20.35542 Y75.70910
G01 X-20.28763 Y75.69701
G01 X-20.27722 Y75.69463
G01 X-20.13775 Y75.65081
G01 X-20.10508 Y75.63966
G01 X-20.07409 Y75.62445
G01 X-19.94448 Y75.55681
G01 X-19.93546 Y75.55114
G01 X-19.87890 Y75.51172
G01 X-19.79894 Y75.44995
G01 X-19.75751 Y75.41241
G01 X-19.70884 Y75.36374
G01 X-19.67128 Y75.32231
G01 X-19.64107 Y75.28322
G01 X-19.60805 Y75.24357
G01 X-19.56787 Y75.19877
G01 X-19.56081 Y75.19077
G01 X-19.52660 Y75.15150
G01 X-19.44814 Y75.07316
G01 X-19.37768 Y75.01162
G01 X-19.32076 Y74.96590
G01 X-19.32073 Y74.96587
G01 X-19.30653 Y74.96440
G01 X-19.24534 Y74.96440
G01 X-19.23109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.32073 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.32073 Y74.96587
G01 X-19.32027 Y74.96552
G01 X-19.29241 Y74.87362
G01 X-19.27592 Y74.79077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.27592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.27592 Y73.55973
G01 X-19.29241 Y73.47700
G01 X-19.33793 Y73.32691
G01 X-19.37468 Y73.23819
G01 X-19.44862 Y73.09986
G01 X-19.50198 Y73.02001
G01 X-19.60148 Y72.89877
G01 X-19.66940 Y72.83085
G01 X-19.79063 Y72.73136
G01 X-19.81494 Y72.71513
G01 X-19.81494 Y71.65813
G01 X-19.74306 Y71.59913
G01 X-19.67511 Y71.53121
G01 X-19.56942 Y71.40241
G01 X-19.51606 Y71.32252
G01 X-19.43749 Y71.17559
G01 X-19.40074 Y71.08684
G01 X-19.38492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.84489 Y71.03469 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.84489 Y71.03469
G01 X-16.86071 Y71.08684
G01 X-16.89749 Y71.17559
G01 X-16.97603 Y71.32252
G01 X-17.02942 Y71.40241
G01 X-17.08992 Y71.47614
G01 X-17.13509 Y71.53121
G01 X-17.20303 Y71.59913
G01 X-17.27494 Y71.65813
G01 X-17.27494 Y72.71513
G01 X-17.25063 Y72.73136
G01 X-17.12940 Y72.83085
G01 X-17.06148 Y72.89877
G01 X-16.96198 Y73.02001
G01 X-16.90862 Y73.09986
G01 X-16.83468 Y73.23819
G01 X-16.79793 Y73.32691
G01 X-16.75241 Y73.47700
G01 X-16.73592 Y73.55973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.69109 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.69109 Y74.96587
G01 X-16.70534 Y74.96440
G01 X-16.76653 Y74.96440
G01 X-16.78070 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.73592 Y74.79077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.73592 Y74.79077
G01 X-16.71947 Y74.87362
G01 X-16.69160 Y74.96549
G01 X-16.69109 Y74.96587
G01 X-16.69107 Y74.96590
G01 X-16.63417 Y75.01162
G01 X-16.56371 Y75.07316
G01 X-16.48530 Y75.15142
G01 X-16.45104 Y75.19077
G01 X-16.44398 Y75.19872
G01 X-16.40379 Y75.24355
G01 X-16.37070 Y75.28330
G01 X-16.34052 Y75.32234
G01 X-16.30301 Y75.36374
G01 X-16.25434 Y75.41241
G01 X-16.21291 Y75.44995
G01 X-16.13295 Y75.51172
G01 X-16.07639 Y75.55114
G01 X-16.06735 Y75.55681
G01 X-15.93775 Y75.62445
G01 X-15.90677 Y75.63966
G01 X-15.87408 Y75.65081
G01 X-15.73463 Y75.69463
G01 X-15.72422 Y75.69701
G01 X-15.65642 Y75.70910
G01 X-15.55617 Y75.72198
G01 X-15.50037 Y75.72473
G01 X-15.43146 Y75.72473
G01 X-15.37565 Y75.72198
G01 X-15.27542 Y75.70910
G01 X-15.20763 Y75.69701
G01 X-15.19722 Y75.69463
G01 X-15.05775 Y75.65081
G01 X-15.02508 Y75.63966
G01 X-14.99409 Y75.62445
G01 X-14.86448 Y75.55681
G01 X-14.85546 Y75.55114
G01 X-14.79890 Y75.51172
G01 X-14.71403 Y75.44616
G01 X-14.67492 Y75.41556
G01 X-14.64581 Y75.39435
G01 X-14.61772 Y75.37286
G01 X-14.59669 Y75.35594
G01 X-14.48360 Y75.28005
G01 X-14.40055 Y75.23367
G01 X-14.35259 Y75.20839
G01 X-14.34355 Y75.20390
G01 X-14.29125 Y75.21218
G01 X-14.22353 Y75.22988
G01 X-14.21594 Y75.24131
G01 X-14.12709 Y75.37532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.34355 Y75.20390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.34355 Y75.20390
G01 X-14.29468 Y75.11243
G01 X-14.25793 Y75.02371
G01 X-14.21594 Y74.88523
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.21594 Y73.46537 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.21594 Y73.46537
G01 X-14.25793 Y73.32691
G01 X-14.29468 Y73.23819
G01 X-14.36862 Y73.09986
G01 X-14.42198 Y73.02001
G01 X-14.52148 Y72.89877
G01 X-14.58940 Y72.83085
G01 X-14.71063 Y72.73136
G01 X-14.73494 Y72.71513
G01 X-14.73494 Y71.65813
G01 X-14.66306 Y71.59913
G01 X-14.59511 Y71.53121
G01 X-14.48942 Y71.40241
G01 X-14.43606 Y71.32252
G01 X-14.35749 Y71.17559
G01 X-14.32074 Y71.08684
G01 X-14.30492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.30492 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.30492 Y70.20383
G01 X-14.28914 Y70.15179
G01 X-14.25239 Y70.06304
G01 X-14.17383 Y69.91610
G01 X-14.12046 Y69.83622
G01 X-14.05993 Y69.76246
G01 X-14.01475 Y69.70741
G01 X-13.94683 Y69.63949
G01 X-13.87919 Y69.58400
G01 X-14.35587 Y69.10731
G01 X-15.15498 Y69.10734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.84489 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.84489 Y70.20383
G01 X-16.86071 Y70.15179
G01 X-16.89749 Y70.06304
G01 X-16.90054 Y70.05735
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.38492 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.38492 Y70.20383
G01 X-19.40074 Y70.15179
G01 X-19.43749 Y70.06304
G01 X-19.51598 Y69.91620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.94490 Y66.88428 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.94490 Y66.88428
G01 X-23.94493 Y67.52446
G01 X-23.94493 Y68.68138
G01 X-23.33550 Y69.29078
G01 X-23.24297 Y69.28166
G01 X-23.14691 Y69.28166
G01 X-22.98107 Y69.29799
G01 X-22.88686 Y69.31674
G01 X-22.72743 Y69.36512
G01 X-22.63868 Y69.40188
G01 X-22.49172 Y69.48041
G01 X-22.41186 Y69.53378
G01 X-22.28306 Y69.63949
G01 X-22.21511 Y69.70741
G01 X-22.10942 Y69.83622
G01 X-22.05606 Y69.91610
G01 X-21.97749 Y70.06304
G01 X-21.94074 Y70.15179
G01 X-21.92492 Y70.20383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.92492 Y71.03469 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.92492 Y71.03469
G01 X-21.94074 Y71.08684
G01 X-21.97749 Y71.17559
G01 X-22.05606 Y71.32252
G01 X-22.10942 Y71.40241
G01 X-22.21511 Y71.53121
G01 X-22.28306 Y71.59913
G01 X-22.35494 Y71.65813
G01 X-22.35494 Y72.71513
G01 X-22.33063 Y72.73136
G01 X-22.20940 Y72.83085
G01 X-22.14148 Y72.89877
G01 X-22.04198 Y73.02001
G01 X-21.98862 Y73.09986
G01 X-21.91468 Y73.23819
G01 X-21.87793 Y73.32691
G01 X-21.83241 Y73.47700
G01 X-21.81592 Y73.55973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.86073 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.86073 Y74.96587
G01 X-21.84653 Y74.96440
G01 X-21.78534 Y74.96440
G01 X-21.77109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.81592 Y74.79077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.81592 Y74.79077
G01 X-21.83241 Y74.87362
G01 X-21.86027 Y74.96552
G01 X-21.86073 Y74.96587
G01 X-21.86076 Y74.96590
G01 X-21.91768 Y75.01162
G01 X-21.98814 Y75.07316
G01 X-22.06660 Y75.15150
G01 X-22.10081 Y75.19077
G01 X-22.10787 Y75.19877
G01 X-22.14805 Y75.24357
G01 X-22.18107 Y75.28322
G01 X-22.21128 Y75.32231
G01 X-22.24884 Y75.36374
G01 X-22.29751 Y75.41241
G01 X-22.33894 Y75.44995
G01 X-22.41890 Y75.51172
G01 X-22.47546 Y75.55114
G01 X-22.48448 Y75.55681
G01 X-22.61409 Y75.62445
G01 X-22.64508 Y75.63966
G01 X-22.67775 Y75.65081
G01 X-22.81722 Y75.69463
G01 X-22.82763 Y75.69701
G01 X-22.89542 Y75.70910
G01 X-22.99565 Y75.72198
G01 X-23.05148 Y75.72473
G01 X-23.12039 Y75.72473
G01 X-23.17620 Y75.72198
G01 X-23.27642 Y75.70910
G01 X-23.34422 Y75.69701
G01 X-23.35463 Y75.69463
G01 X-23.49410 Y75.65081
G01 X-23.52677 Y75.63966
G01 X-23.55775 Y75.62445
G01 X-23.68737 Y75.55681
G01 X-23.69639 Y75.55114
G01 X-23.73949 Y75.52188
G01 X-23.75308 Y75.51190
G01 X-23.79484 Y75.48345
G01 X-23.82687 Y75.46326
G01 X-23.88778 Y75.42879
G01 X-23.95864 Y75.39298
G01 X-24.00802 Y75.36986
G01 X-24.07119 Y75.34256
G01 X-24.12034 Y75.32280
G01 X-24.13827 Y75.31609
G01 X-24.14005 Y75.31543
G01 X-24.18326 Y75.25076
G01 X-24.25719 Y75.11243
G01 X-24.29395 Y75.02371
G01 X-24.33947 Y74.87362
G01 X-24.35592 Y74.79077
G01 X-24.35592 Y73.55973
G01 X-24.33947 Y73.47700
G01 X-24.29395 Y73.32691
G01 X-24.25719 Y73.23819
G01 X-24.18326 Y73.09986
G01 X-24.12989 Y73.02001
G01 X-24.11092 Y72.99689
G01 X-24.03492 Y72.90428
G01 X-24.03492 Y71.65813
G01 X-24.10683 Y71.59913
G01 X-24.17475 Y71.53121
G01 X-24.28046 Y71.40241
G01 X-24.33383 Y71.32252
G01 X-24.41239 Y71.17559
G01 X-24.44914 Y71.08684
G01 X-24.46492 Y71.03469
G01 X-24.46492 Y70.45781
G01 X-24.48628 Y70.41262
G01 X-24.52534 Y70.33944
G01 X-24.61366 Y70.19210
G01 X-24.65186 Y70.13487
G01 X-24.75219 Y69.99959
G01 X-24.79090 Y69.95240
G01 X-24.90294 Y69.82875
G01 X-24.94439 Y69.78732
G01 X-25.06799 Y69.67531
G01 X-25.07723 Y69.66708
G01 X-25.17840 Y69.42283
G01 X-25.18607 Y69.40297
G01 X-25.21063 Y69.33436
G01 X-25.22072 Y69.30117
G01 X-25.23791 Y69.23256
G01 X-25.24355 Y69.20432
G01 X-25.25371 Y69.13571
G01 X-25.25623 Y69.11024
G01 X-25.25961 Y69.04160
G01 X-25.25991 Y69.02931
G01 X-25.25991 Y62.76331
G01 X-25.26022 Y62.75101
G01 X-25.26359 Y62.68241
G01 X-25.26611 Y62.65696
G01 X-25.27627 Y62.58835
G01 X-25.28191 Y62.56011
G01 X-25.29910 Y62.49150
G01 X-25.30919 Y62.45831
G01 X-25.33375 Y62.38970
G01 X-25.34142 Y62.36984
G01 X-25.62491 Y61.68538
G01 X-27.36798 Y59.94233
G01 X-27.41601 Y59.92242
G01 X-27.46123 Y59.90497
G01 X-27.52986 Y59.88041
G01 X-27.61139 Y59.85562
G01 X-27.68000 Y59.83845
G01 X-27.75422 Y59.82364
G01 X-27.82282 Y59.81348
G01 X-27.89290 Y59.80655
G01 X-27.96153 Y59.80317
G01 X-27.99595 Y59.80233
G01 X-29.02368 Y59.80233
G01 X-29.13720 Y59.85600
G01 X-29.19295 Y59.87916
G01 X-29.34977 Y59.93527
G01 X-29.39107 Y59.94785
G01 X-29.54789 Y59.98711
G01 X-29.57966 Y59.99346
G01 X-29.73648 Y60.01673
G01 X-29.76280 Y60.01932
G01 X-29.91964 Y60.02702
G01 X-29.94420 Y60.02702
G01 X-30.10105 Y60.01932
G01 X-30.12736 Y60.01673
G01 X-30.28418 Y59.99346
G01 X-30.31596 Y59.98711
G01 X-30.47278 Y59.94785
G01 X-30.51408 Y59.93527
G01 X-30.67090 Y59.87916
G01 X-30.72665 Y59.85600
G01 X-30.88347 Y59.78186
G01 X-30.96005 Y59.74078
G01 X-31.09096 Y59.66232
G01 X-31.10318 Y59.63944
G01 X-31.13993 Y59.55069
G01 X-31.18548 Y59.40063
G01 X-31.20420 Y59.30642
G01 X-31.20653 Y59.28280
G01 X-31.21959 Y59.15034
G01 X-31.21959 Y59.05427
G01 X-31.20420 Y58.89822
G01 X-31.18548 Y58.80401
G01 X-31.13993 Y58.65392
G01 X-31.10318 Y58.56517
G01 X-31.02927 Y58.42687
G01 X-30.97588 Y58.34701
G01 X-30.87641 Y58.22578
G01 X-30.80846 Y58.15786
G01 X-30.68726 Y58.05837
G01 X-30.60737 Y58.00500
G01 X-30.46907 Y57.93106
G01 X-30.38032 Y57.89431
G01 X-30.23026 Y57.84879
G01 X-30.13605 Y57.83004
G01 X-30.02863 Y57.81945
G01 X-29.97997 Y57.81468
G01 X-29.88390 Y57.81468
G01 X-29.72785 Y57.83004
G01 X-29.63364 Y57.84879
G01 X-29.48355 Y57.89431
G01 X-29.39480 Y57.93106
G01 X-29.25650 Y58.00500
G01 X-29.17662 Y58.05837
G01 X-29.05541 Y58.15786
G01 X-28.98749 Y58.22578
G01 X-28.95749 Y58.26233
G01 X-25.96288 Y58.26233
G01 X-26.19788 Y58.02730
G01 X-26.23019 Y57.99166
G01 X-26.27370 Y57.93863
G01 X-26.32707 Y57.85877
G01 X-26.35943 Y57.79827
G01 X-26.39618 Y57.70952
G01 X-26.41609 Y57.64386
G01 X-26.43484 Y57.54965
G01 X-26.44154 Y57.48135
G01 X-26.44391 Y57.43332
G01 X-26.44391 Y57.12837
G01 X-26.49953 Y57.12291
G01 X-26.59145 Y57.09502
G01 X-26.67616 Y57.04973
G01 X-26.75041 Y56.98880
G01 X-26.81137 Y56.91455
G01 X-26.85663 Y56.82982
G01 X-26.88452 Y56.73790
G01 X-26.89394 Y56.64231
G01 X-26.89394 Y56.15243
G01 X-26.89211 Y56.14013
G01 X-26.88274 Y56.04531
G01 X-26.87505 Y55.88849
G01 X-26.87505 Y55.79616
G01 X-26.87774 Y55.74125
G01 X-26.58825 Y55.04232
G01 X-26.40393 Y54.85799
G01 X-25.66590 Y54.55230
G01 X-22.33960 Y51.22594
G01 X-22.26390 Y51.22594
G01 X-22.09809 Y51.20961
G01 X-22.00386 Y51.19089
G01 X-21.84442 Y51.14250
G01 X-21.75568 Y51.10575
G01 X-21.60871 Y51.02721
G01 X-21.52885 Y50.97385
G01 X-21.40005 Y50.86813
G01 X-21.33213 Y50.80021
G01 X-21.30693 Y50.76950
G01 X-21.22642 Y50.67141
G01 X-21.17305 Y50.59153
G01 X-21.09449 Y50.44459
G01 X-21.06193 Y50.36595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-25.66590 Y54.55230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.66590 Y54.55230
G01 X-24.80393 Y54.55230
G01 X-24.70835 Y54.56172
G01 X-24.61643 Y54.58961
G01 X-24.53172 Y54.63490
G01 X-24.45745 Y54.69584
G01 X-24.39651 Y54.77008
G01 X-24.35123 Y54.85479
G01 X-24.32336 Y54.94671
G01 X-24.31394 Y55.04232
G01 X-24.31394 Y56.64231
G01 X-24.32336 Y56.73790
G01 X-24.35123 Y56.82982
G01 X-24.39651 Y56.91455
G01 X-24.45745 Y56.98880
G01 X-24.53172 Y57.04973
G01 X-24.61643 Y57.09502
G01 X-24.70835 Y57.12291
G01 X-24.72478 Y57.12451
G01 X-24.19095 Y57.65837
G01 X-24.15864 Y57.69400
G01 X-24.11513 Y57.74704
G01 X-24.06177 Y57.82689
G01 X-24.02941 Y57.88740
G01 X-23.99265 Y57.97615
G01 X-23.97274 Y58.04180
G01 X-23.95399 Y58.13601
G01 X-23.94729 Y58.20431
G01 X-23.94493 Y58.25232
G01 X-23.94488 Y61.27324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.38030 Y63.44464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.38030 Y63.44464
G01 X-17.12094 Y63.44464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.80291 Y63.44464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.80291 Y63.44464
G01 X-14.79069 Y63.46750
G01 X-14.75394 Y63.55625
G01 X-14.70842 Y63.70631
G01 X-14.68968 Y63.80052
G01 X-14.68734 Y63.82416
G01 X-14.67431 Y63.95660
G01 X-14.67431 Y64.05266
G01 X-14.68096 Y64.12035
G01 X-13.27898 Y65.52233
G01 X-12.11617 Y65.52233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.70418 Y62.96488 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.70418 Y62.96488
G01 X-11.65062 Y63.00067
G01 X-11.52941 Y63.10016
G01 X-11.46149 Y63.16808
G01 X-11.44104 Y63.19298
G01 X-11.36200 Y63.28932
G01 X-11.30863 Y63.36917
G01 X-11.23469 Y63.50750
G01 X-11.19794 Y63.59625
G01 X-11.15242 Y63.74631
G01 X-11.15016 Y63.75764
G01 X-11.14566 Y63.76846
G01 X-11.12575 Y63.83412
G01 X-11.10701 Y63.92833
G01 X-11.10030 Y63.99663
G01 X-11.10030 Y64.09267
G01 X-11.10652 Y64.15609
G01 X-10.69029 Y64.57232
G01 X-9.96101 Y64.57232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.32898 Y67.20234 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.32898 Y67.20234
G01 X-9.22946 Y68.30185
G01 X-9.19715 Y68.33749
G01 X-9.15364 Y68.39053
G01 X-9.10028 Y68.47038
G01 X-9.06792 Y68.53089
G01 X-9.03116 Y68.61963
G01 X-9.01125 Y68.68529
G01 X-8.99251 Y68.77950
G01 X-8.98580 Y68.84780
G01 X-8.98344 Y68.89581
G01 X-8.98344 Y69.29825
G01 X-8.92784 Y69.30373
G01 X-8.83591 Y69.33162
G01 X-8.75121 Y69.37688
G01 X-8.67696 Y69.43782
G01 X-8.61603 Y69.51209
G01 X-8.57074 Y69.59680
G01 X-8.54285 Y69.68872
G01 X-8.53343 Y69.78430
G01 X-8.53343 Y71.38432
G01 X-8.54285 Y71.47990
G01 X-8.57074 Y71.57183
G01 X-8.61603 Y71.65653
G01 X-8.67696 Y71.73080
G01 X-8.75121 Y71.79174
G01 X-8.83591 Y71.83700
G01 X-8.92784 Y71.86489
G01 X-9.02344 Y71.87431
G01 X-9.51361 Y71.87431
G01 X-9.52565 Y71.87254
G01 X-9.62034 Y71.86319
G01 X-9.77719 Y71.85547
G01 X-9.86967 Y71.85547
G01 X-10.02649 Y71.86319
G01 X-10.12115 Y71.87254
G01 X-10.13322 Y71.87431
G01 X-10.13355 Y71.87436
G01 X-10.27183 Y71.91630
G01 X-10.36058 Y71.95308
G01 X-10.49888 Y72.02699
G01 X-10.57874 Y72.08036
G01 X-10.69997 Y72.17985
G01 X-10.76789 Y72.24777
G01 X-10.86738 Y72.36900
G01 X-10.92075 Y72.44886
G01 X-10.99469 Y72.58719
G01 X-11.03144 Y72.67594
G01 X-11.07696 Y72.82600
G01 X-11.09570 Y72.92021
G01 X-11.11107 Y73.07629
G01 X-11.11107 Y73.17233
G01 X-11.09570 Y73.32841
G01 X-11.07696 Y73.42262
G01 X-11.03144 Y73.57271
G01 X-10.99469 Y73.66143
G01 X-10.92075 Y73.79976
G01 X-10.86738 Y73.87962
G01 X-10.76789 Y74.00085
G01 X-10.69997 Y74.06877
G01 X-10.60180 Y74.14934
G01 X-10.57874 Y74.16826
G01 X-10.49888 Y74.22163
G01 X-10.36058 Y74.29557
G01 X-10.27183 Y74.33232
G01 X-10.12174 Y74.37784
G01 X-10.03888 Y74.39432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.60787 Y74.39432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.60787 Y74.39432
G01 X-9.52512 Y74.37784
G01 X-9.37506 Y74.33232
G01 X-9.28631 Y74.29557
G01 X-9.14800 Y74.22163
G01 X-9.06812 Y74.16826
G01 X-8.94689 Y74.06877
G01 X-8.87897 Y74.00085
G01 X-8.84902 Y73.96433
G01 X-8.06495 Y73.96433
G01 X-8.01692 Y73.96197
G01 X-7.94862 Y73.95526
G01 X-7.85441 Y73.93651
G01 X-7.78875 Y73.91660
G01 X-7.70000 Y73.87985
G01 X-7.63950 Y73.84749
G01 X-7.55964 Y73.79412
G01 X-7.50661 Y73.75061
G01 X-7.47097 Y73.71830
G01 X-7.04059 Y73.28793
G01 X-6.58789 Y72.83525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.97684 Y69.81158 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.97684 Y69.81158
G01 X-3.95795 Y69.83789
G01 X-3.95795 Y76.71530
G01 X-3.96031 Y76.76333
G01 X-3.96701 Y76.83163
G01 X-3.98576 Y76.92584
G01 X-3.98672 Y76.92902
G01 X-3.98896 Y76.93079
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.04342 Y79.17880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.04342 Y79.17880
G01 X-3.07997 Y79.14877
G01 X-3.14789 Y79.08085
G01 X-3.17789 Y79.04435
G01 X-3.20910 Y79.04435
G01 X-3.16641 Y79.09785
G01 X-3.04342 Y79.21197
G01 X-3.04342 Y79.17880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.63790 Y75.31426 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.63790 Y75.31426
G01 X-6.09061 Y75.76694
G01 X-6.58197 Y76.25830
G01 X-6.61761 Y76.29061
G01 X-6.67064 Y76.33412
G01 X-6.75050 Y76.38749
G01 X-6.81100 Y76.41985
G01 X-6.89975 Y76.45660
G01 X-6.96541 Y76.47651
G01 X-7.05962 Y76.49526
G01 X-7.12792 Y76.50197
G01 X-7.17595 Y76.50433
G01 X-8.84902 Y76.50433
G01 X-8.87897 Y76.54085
G01 X-8.94689 Y76.60877
G01 X-9.06812 Y76.70826
G01 X-9.14800 Y76.76163
G01 X-9.28631 Y76.83557
G01 X-9.37506 Y76.87232
G01 X-9.52512 Y76.91784
G01 X-9.60787 Y76.93432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.03888 Y76.93432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.03888 Y76.93432
G01 X-10.12174 Y76.91784
G01 X-10.21326 Y76.89008
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.21282 Y76.97842 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.21282 Y76.97842
G01 X-10.12174 Y76.95078
G01 X-10.03888 Y76.93432
G01 X-9.60787 Y76.93432
G01 X-9.52512 Y76.95078
G01 X-9.37506 Y76.99630
G01 X-9.28631 Y77.03308
G01 X-9.14800 Y77.10699
G01 X-9.06812 Y77.16036
G01 X-9.04501 Y77.17933
G01 X-8.94689 Y77.25985
G01 X-8.87897 Y77.32777
G01 X-8.84897 Y77.36435
G01 X-6.63488 Y77.36435
G01 X-5.63793 Y76.36737
G01 X-5.63790 Y75.31426
G01 X-5.35441 Y74.62983
G01 X-5.34674 Y74.60997
G01 X-5.32218 Y74.54136
G01 X-5.31210 Y74.50817
G01 X-5.29493 Y74.43956
G01 X-5.28929 Y74.41132
G01 X-5.27910 Y74.34269
G01 X-5.27659 Y74.31724
G01 X-5.27321 Y74.24860
G01 X-5.27293 Y74.23631
G01 X-5.27293 Y68.36812
G01 X-5.27321 Y68.35586
G01 X-5.27659 Y68.28722
G01 X-5.27910 Y68.26180
G01 X-5.28929 Y68.19317
G01 X-5.29170 Y68.17917
G01 X-5.29988 Y68.16756
G01 X-5.34121 Y68.11186
G01 X-5.35744 Y68.09205
G01 X-5.40359 Y68.04117
G01 X-5.41205 Y68.03228
G01 X-8.36787 Y65.07646
G01 X-8.37673 Y65.06798
G01 X-8.42764 Y65.02185
G01 X-8.44745 Y65.00560
G01 X-8.50315 Y64.96429
G01 X-8.52713 Y64.94829
G01 X-8.58778 Y64.91195
G01 X-8.61836 Y64.89561
G01 X-8.64338 Y64.88378
G01 X-8.67628 Y64.88528
G01 X-8.68631 Y64.88528
G01 X-8.70373 Y64.88571
G01 X-8.83322 Y64.89208
G01 X-8.86662 Y64.89208
G01 X-9.02347 Y64.88436
G01 X-9.05867 Y64.88088
G01 X-9.21549 Y64.85764
G01 X-9.25639 Y64.84946
G01 X-9.41321 Y64.81019
G01 X-9.46416 Y64.79470
G01 X-9.62098 Y64.73859
G01 X-9.68709 Y64.71113
G01 X-9.84391 Y64.63697
G01 X-9.93175 Y64.58985
G01 X-9.96101 Y64.57232
G01 X-10.02118 Y64.45975
G01 X-10.05793 Y64.37100
G01 X-10.10348 Y64.22094
G01 X-10.12220 Y64.12673
G01 X-10.13759 Y63.97065
G01 X-10.13759 Y63.87461
G01 X-10.12220 Y63.71853
G01 X-10.10348 Y63.62432
G01 X-10.05793 Y63.47423
G01 X-10.02118 Y63.38551
G01 X-9.94727 Y63.24718
G01 X-9.89388 Y63.16732
G01 X-9.79441 Y63.04609
G01 X-9.72646 Y62.97817
G01 X-9.60526 Y62.87868
G01 X-9.52537 Y62.82531
G01 X-9.38707 Y62.75137
G01 X-9.29832 Y62.71462
G01 X-9.14826 Y62.66910
G01 X-9.05405 Y62.65035
G01 X-8.89797 Y62.63499
G01 X-8.80190 Y62.63499
G01 X-8.64585 Y62.65035
G01 X-8.55164 Y62.66910
G01 X-8.40155 Y62.71462
G01 X-8.31280 Y62.75137
G01 X-8.17450 Y62.82531
G01 X-8.09462 Y62.87868
G01 X-7.97341 Y62.97817
G01 X-7.90549 Y63.04609
G01 X-7.80600 Y63.16732
G01 X-7.75263 Y63.24718
G01 X-7.67869 Y63.38551
G01 X-7.64194 Y63.47423
G01 X-7.59642 Y63.62432
G01 X-7.57768 Y63.71853
G01 X-7.56231 Y63.87461
G01 X-7.56231 Y63.97065
G01 X-7.56693 Y64.01769
G01 X-5.54783 Y66.03676
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-5.34951 Y65.71639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-5.34951 Y65.71639
G01 X-5.40989 Y65.68413
G01 X-5.48974 Y65.63077
G01 X-5.61098 Y65.53127
G01 X-5.67890 Y65.46335
G01 X-5.77839 Y65.34212
G01 X-5.83176 Y65.26226
G01 X-5.90569 Y65.12393
G01 X-5.94245 Y65.03521
G01 X-5.97085 Y64.94156
G01 X-5.98797 Y64.88512
G01 X-6.00671 Y64.79091
G01 X-6.02208 Y64.63483
G01 X-6.02208 Y64.53879
G01 X-6.00671 Y64.38271
G01 X-5.98797 Y64.28850
G01 X-5.94245 Y64.13841
G01 X-5.90569 Y64.04969
G01 X-5.83176 Y63.91136
G01 X-5.77839 Y63.83151
G01 X-5.67890 Y63.71027
G01 X-5.61098 Y63.64235
G01 X-5.48974 Y63.54286
G01 X-5.40989 Y63.48949
G01 X-5.27156 Y63.41556
G01 X-5.18284 Y63.37880
G01 X-5.03275 Y63.33328
G01 X-4.93854 Y63.31454
G01 X-4.78246 Y63.29917
G01 X-4.68642 Y63.29917
G01 X-4.63935 Y63.30380
G01 X-3.25292 Y61.91739
G01 X-3.25292 Y57.06068
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-3.21553 Y54.66663 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-3.21553 Y54.66663
G01 X-3.11543 Y55.04232
G01 X-3.11543 Y56.64231
G01 X-3.20354 Y56.99482
G01 X-3.27751 Y57.09347
G01 X-3.28043 Y57.09502
G01 X-3.37235 Y57.12291
G01 X-3.46793 Y57.13231
G01 X-4.36996 Y57.13231
G01 X-6.75428 Y59.51660
G01 X-6.78992 Y59.54891
G01 X-6.84295 Y59.59242
G01 X-6.92281 Y59.64579
G01 X-6.98332 Y59.67815
G01 X-7.07206 Y59.71490
G01 X-7.13772 Y59.73482
G01 X-7.23193 Y59.75356
G01 X-7.30023 Y59.76027
G01 X-7.34826 Y59.76263
G01 X-7.87549 Y59.76263
G01 X-7.90549 Y59.79915
G01 X-7.97341 Y59.86710
G01 X-8.09462 Y59.96659
G01 X-8.17450 Y60.01996
G01 X-8.31280 Y60.09387
G01 X-8.40155 Y60.13062
G01 X-8.55164 Y60.17617
G01 X-8.64585 Y60.19489
G01 X-8.80190 Y60.21028
G01 X-8.89797 Y60.21028
G01 X-8.94498 Y60.20563
G01 X-11.70418 Y62.96488
G01 X-11.74178 Y62.96852
G01 X-11.93492 Y62.99714
G01 X-12.01079 Y63.01213
G01 X-12.10169 Y63.03489
G01 X-12.12933 Y63.04111
G01 X-12.18691 Y63.05256
G01 X-12.20535 Y63.05660
G01 X-12.23040 Y63.06265
G01 X-12.24637 Y63.06615
G01 X-12.31668 Y63.08012
G01 X-12.35031 Y63.08515
G01 X-12.39062 Y63.08911
G01 X-12.41952 Y63.09333
G01 X-12.42079 Y63.09356
G01 X-12.44886 Y63.09767
G01 X-12.51716 Y63.10441
G01 X-12.53195 Y63.10550
G01 X-12.57700 Y63.10771
G01 X-12.60731 Y63.11070
G01 X-12.76410 Y63.13395
G01 X-12.79997 Y63.14111
G01 X-12.95681 Y63.18040
G01 X-13.00238 Y63.19427
G01 X-13.15920 Y63.25038
G01 X-13.21955 Y63.27545
G01 X-13.37637 Y63.34959
G01 X-13.45800 Y63.39336
G01 X-13.54355 Y63.44464
G01 X-13.57718 Y63.50750
G01 X-13.61393 Y63.59625
G01 X-13.65948 Y63.74631
G01 X-13.67820 Y63.84052
G01 X-13.69359 Y63.99661
G01 X-13.69359 Y64.09267
G01 X-13.67820 Y64.24873
G01 X-13.65948 Y64.34293
G01 X-13.61393 Y64.49302
G01 X-13.60471 Y64.51532
G01 X-13.57718 Y64.58177
G01 X-13.50327 Y64.72007
G01 X-13.44988 Y64.79993
G01 X-13.35041 Y64.92117
G01 X-13.28246 Y64.98909
G01 X-13.16126 Y65.08858
G01 X-13.08137 Y65.14194
G01 X-12.94307 Y65.21588
G01 X-12.85432 Y65.25264
G01 X-12.70426 Y65.29815
G01 X-12.61005 Y65.31690
G01 X-12.45397 Y65.33226
G01 X-12.35790 Y65.33226
G01 X-12.31086 Y65.32764
G01 X-12.11617 Y65.52233
G01 X-11.43172 Y65.80582
G01 X-11.41186 Y65.81349
G01 X-11.34325 Y65.83805
G01 X-11.31005 Y65.84814
G01 X-11.24145 Y65.86533
G01 X-11.21320 Y65.87097
G01 X-11.14460 Y65.88113
G01 X-11.11915 Y65.88365
G01 X-11.05054 Y65.88703
G01 X-11.03825 Y65.88733
G01 X-9.09723 Y65.88733
G01 X-9.08496 Y65.88764
G01 X-9.01633 Y65.89101
G01 X-8.99085 Y65.89353
G01 X-8.92225 Y65.90369
G01 X-8.90828 Y65.90613
G01 X-8.89665 Y65.91431
G01 X-8.84094 Y65.95561
G01 X-8.82113 Y65.97186
G01 X-8.77023 Y66.01799
G01 X-8.76137 Y66.02645
G01 X-6.36206 Y68.42576
G01 X-6.35357 Y68.43465
G01 X-6.30745 Y68.48555
G01 X-6.29119 Y68.50536
G01 X-6.24989 Y68.56106
G01 X-6.24171 Y68.57269
G01 X-6.23927 Y68.58666
G01 X-6.22911 Y68.65527
G01 X-6.22660 Y68.68072
G01 X-6.22322 Y68.74933
G01 X-6.22292 Y68.76162
G01 X-6.22292 Y71.75732
G01 X-6.22322 Y71.76962
G01 X-6.22660 Y71.83825
G01 X-6.22911 Y71.86372
G01 X-6.23927 Y71.93233
G01 X-6.24491 Y71.96057
G01 X-6.26211 Y72.02918
G01 X-6.27219 Y72.06238
G01 X-6.29675 Y72.13098
G01 X-6.30442 Y72.15084
G01 X-6.58789 Y72.83525
G01 X-6.58791 Y73.88838
G01 X-7.52388 Y74.82435
G01 X-8.84897 Y74.82435
G01 X-8.87897 Y74.78777
G01 X-8.94689 Y74.71985
G01 X-9.04501 Y74.63933
G01 X-9.06812 Y74.62036
G01 X-9.14800 Y74.56699
G01 X-9.28631 Y74.49308
G01 X-9.37506 Y74.45630
G01 X-9.52512 Y74.41078
G01 X-9.60787 Y74.39432
G01 X-10.03888 Y74.39432
G01 X-10.12174 Y74.41078
G01 X-10.27183 Y74.45630
G01 X-10.36058 Y74.49308
G01 X-10.49888 Y74.56699
G01 X-10.57874 Y74.62036
G01 X-10.69997 Y74.71985
G01 X-10.76789 Y74.78777
G01 X-10.86738 Y74.90900
G01 X-10.91148 Y74.97499
G01 X-10.92075 Y74.98886
G01 X-10.99469 Y75.12719
G01 X-11.03144 Y75.21594
G01 X-11.05659 Y75.29884
G01 X-11.03093 Y75.37992
G01 X-11.00909 Y75.46877
G01 X-10.99453 Y75.54205
G01 X-10.98509 Y75.60463
G01 X-10.98181 Y75.62904
G01 X-10.97360 Y75.69882
G01 X-10.97162 Y75.71789
G01 X-10.97078 Y75.72729
G01 X-10.95930 Y75.85386
G01 X-10.95913 Y75.85495
G01 X-10.94391 Y75.92231
G01 X-10.91173 Y76.03796
G01 X-10.89895 Y76.07258
G01 X-10.87195 Y76.13585
G01 X-10.83510 Y76.21180
G01 X-10.79812 Y76.27420
G01 X-10.76017 Y76.33163
G01 X-10.73131 Y76.37095
G01 X-10.66035 Y76.45261
G01 X-10.61259 Y76.50235
G01 X-10.60312 Y76.51131
G01 X-10.51894 Y76.57860
G01 X-10.49136 Y76.60184
G01 X-10.43848 Y76.64873
G01 X-10.43424 Y76.65254
G01 X-10.38742 Y76.69470
G01 X-10.32113 Y76.76183
G01 X-10.25948 Y76.83178
G01 X-10.21326 Y76.89008
G01 X-10.21105 Y76.92292
G01 X-10.21282 Y76.97842
G01 X-10.21709 Y76.98396
G01 X-10.25969 Y77.03620
G01 X-10.32108 Y77.10699
G01 X-10.40099 Y77.18731
G01 X-10.43850 Y77.22000
G01 X-10.44346 Y77.22434
G01 X-10.49133 Y77.26681
G01 X-10.51894 Y77.29008
G01 X-10.60312 Y77.35734
G01 X-10.61257 Y77.36628
G01 X-10.66035 Y77.41604
G01 X-10.73131 Y77.49770
G01 X-10.76017 Y77.53702
G01 X-10.79814 Y77.59447
G01 X-10.83507 Y77.65685
G01 X-10.87198 Y77.73285
G01 X-10.89895 Y77.79612
G01 X-10.91173 Y77.83069
G01 X-10.94391 Y77.94634
G01 X-10.95913 Y78.01370
G01 X-10.95930 Y78.01479
G01 X-10.97338 Y78.16991
G01 X-10.97564 Y78.20432
G01 X-10.97338 Y78.23882
G01 X-10.95930 Y78.39386
G01 X-10.95913 Y78.39498
G01 X-10.94391 Y78.46231
G01 X-10.91173 Y78.57796
G01 X-10.89895 Y78.61258
G01 X-10.87195 Y78.67585
G01 X-10.83510 Y78.75182
G01 X-10.79812 Y78.81420
G01 X-10.76017 Y78.87166
G01 X-10.73131 Y78.91095
G01 X-10.66035 Y78.99261
G01 X-10.63749 Y79.01766
G01 X-10.60320 Y79.03089
G01 X-10.44638 Y79.08700
G01 X-10.39281 Y79.10331
G01 X-10.23601 Y79.14257
G01 X-10.19261 Y79.15124
G01 X-10.03576 Y79.17448
G01 X-9.99814 Y79.17819
G01 X-9.84135 Y79.18591
G01 X-9.80553 Y79.18591
G01 X-9.64869 Y79.17819
G01 X-9.61107 Y79.17448
G01 X-9.45425 Y79.15121
G01 X-9.41084 Y79.14257
G01 X-9.25405 Y79.10331
G01 X-9.20048 Y79.08700
G01 X-9.04366 Y79.03089
G01 X-9.00582 Y79.01618
G01 X-8.98323 Y78.99531
G01 X-8.95738 Y78.97252
G01 X-8.90968 Y78.93252
G01 X-8.90409 Y78.92787
G01 X-8.76172 Y78.90641
G01 X-8.74209 Y78.90547
G01 X-8.70754 Y78.90460
G01 X-6.28695 Y78.90460
G01 X-6.25251 Y78.90374
G01 X-6.21822 Y78.90209
G01 X-6.18421 Y78.89701
G01 X-6.11674 Y78.88360
G01 X-6.08342 Y78.87524
G01 X-6.05108 Y78.86368
G01 X-5.98751 Y78.83737
G01 X-5.95642 Y78.82264
G01 X-5.92701 Y78.80501
G01 X-5.86970 Y78.76676
G01 X-5.84214 Y78.74628
G01 X-5.81667 Y78.72320
G01 X-5.79178 Y78.69952
G01 X-4.30278 Y77.21047
G01 X-4.29132 Y77.19874
G01 X-4.27888 Y77.18573
G01 X-4.22879 Y77.13808
G01 X-4.20933 Y77.12129
G01 X-4.17326 Y77.08807
G01 X-4.16280 Y77.07783
G01 X-4.12005 Y77.03874
G01 X-4.04916 Y76.97829
G01 X-3.98899 Y76.93079
G01 X-3.91230 Y76.93481
G01 X-3.85188 Y76.94438
G01 X-3.75299 Y76.97087
G01 X-3.66176 Y77.01736
G01 X-3.58218 Y77.08175
G01 X-3.53890 Y77.12500
G01 X-3.47436 Y77.20471
G01 X-3.42780 Y77.29607
G01 X-3.40954 Y77.36432
G01 X-3.17789 Y77.36432
G01 X-3.14789 Y77.32777
G01 X-3.07997 Y77.25985
G01 X-3.04342 Y77.22985
G01 X-3.04342 Y76.63877
G01 X-3.07997 Y76.60877
G01 X-3.14789 Y76.54085
G01 X-3.24738 Y76.41962
G01 X-3.30075 Y76.33976
G01 X-3.37469 Y76.20143
G01 X-3.41144 Y76.11271
G01 X-3.45696 Y75.96262
G01 X-3.47570 Y75.86841
G01 X-3.49107 Y75.71233
G01 X-3.49107 Y75.61629
G01 X-3.47570 Y75.46021
G01 X-3.45696 Y75.36600
G01 X-3.41144 Y75.21594
G01 X-3.37469 Y75.12719
G01 X-3.30075 Y74.98886
G01 X-3.24738 Y74.90900
G01 X-3.14789 Y74.78777
G01 X-3.07997 Y74.71985
G01 X-3.04342 Y74.68985
G01 X-3.04342 Y74.09877
G01 X-3.07997 Y74.06877
G01 X-3.14789 Y74.00085
G01 X-3.24738 Y73.87962
G01 X-3.30075 Y73.79976
G01 X-3.37469 Y73.66143
G01 X-3.41144 Y73.57271
G01 X-3.45696 Y73.42262
G01 X-3.47570 Y73.32841
G01 X-3.49107 Y73.17233
G01 X-3.49107 Y73.07629
G01 X-3.47570 Y72.92021
G01 X-3.45696 Y72.82600
G01 X-3.41144 Y72.67594
G01 X-3.37469 Y72.58719
G01 X-3.30075 Y72.44886
G01 X-3.24738 Y72.36900
G01 X-3.14789 Y72.24777
G01 X-3.07997 Y72.17985
G01 X-3.04342 Y72.14985
G01 X-3.04342 Y71.55877
G01 X-3.07997 Y71.52877
G01 X-3.14789 Y71.46085
G01 X-3.24738 Y71.33962
G01 X-3.30075 Y71.25976
G01 X-3.37469 Y71.12143
G01 X-3.41144 Y71.03271
G01 X-3.45696 Y70.88262
G01 X-3.47570 Y70.78841
G01 X-3.49107 Y70.63233
G01 X-3.49107 Y70.53629
G01 X-3.47570 Y70.38021
G01 X-3.46910 Y70.34696
G01 X-3.45696 Y70.28600
G01 X-3.41144 Y70.13594
G01 X-3.37469 Y70.04719
G01 X-3.30075 Y69.90886
G01 X-3.24738 Y69.82900
G01 X-3.14789 Y69.70777
G01 X-3.12592 Y69.68580
G01 X-3.12592 Y69.65324
G01 X-3.16641 Y69.69080
G01 X-3.18792 Y69.71775
G01 X-3.24045 Y69.77396
G01 X-3.30113 Y69.82123
G01 X-3.35221 Y69.85494
G01 X-3.44311 Y69.90211
G01 X-3.54184 Y69.92933
G01 X-3.64408 Y69.93546
G01 X-3.70519 Y69.93271
G01 X-3.80644 Y69.91747
G01 X-3.90232 Y69.88151
G01 X-3.94718 Y69.85286
G01 X-3.97684 Y69.81158
G01 X-4.00631 Y69.75042
G01 X-4.08175 Y69.51041
G01 X-4.09010 Y69.45344
G01 X-4.09767 Y69.35052
G01 X-4.09767 Y67.97465
G01 X-4.09851 Y67.94018
G01 X-4.10021 Y67.90594
G01 X-4.10524 Y67.87191
G01 X-4.11868 Y67.80447
G01 X-4.12703 Y67.77112
G01 X-4.13859 Y67.73881
G01 X-4.15569 Y67.69558
G01 X-4.17631 Y67.68131
G01 X-4.22261 Y67.65037
G01 X-4.24065 Y67.63790
G01 X-4.27491 Y67.61339
G01 X-4.29053 Y67.60259
G01 X-4.35015 Y67.56277
G01 X-4.37212 Y67.54885
G01 X-4.41200 Y67.52495
G01 X-4.45127 Y67.49873
G01 X-4.57860 Y67.40430
G01 X-4.61004 Y67.37851
G01 X-4.72640 Y67.27305
G01 X-4.75365 Y67.24580
G01 X-4.85911 Y67.12944
G01 X-4.88489 Y67.09800
G01 X-4.97933 Y66.97067
G01 X-5.00554 Y66.93140
G01 X-5.08865 Y66.79271
G01 X-5.11647 Y66.74057
G01 X-5.18362 Y66.59866
G01 X-5.29701 Y66.48525
G01 X-5.36925 Y66.40059
G01 X-5.40567 Y66.35045
G01 X-5.52467 Y66.11212
G01 X-5.54588 Y66.04682
G01 X-5.54783 Y66.03678
G01 X-5.54783 Y66.03676
G01 X-5.54837 Y66.03414
G01 X-5.52500 Y65.94700
G01 X-5.47849 Y65.85573
G01 X-5.41405 Y65.77613
G01 X-5.37080 Y65.73287
G01 X-5.35053 Y65.71649
G01 X-5.34951 Y65.71639
G01 X-5.24435 Y65.70722
G01 X-5.15563 Y65.70531
G01 X-5.08332 Y65.70697
G01 X-5.02068 Y65.71128
G01 X-4.99424 Y65.71357
G01 X-4.92495 Y65.72086
G01 X-4.90963 Y65.72264
G01 X-4.90521 Y65.72320
G01 X-4.84321 Y65.73143
G01 X-4.81972 Y65.72388
G01 X-4.76607 Y65.70760
G01 X-4.70496 Y65.68581
G01 X-4.66252 Y65.66823
G01 X-4.60920 Y65.64910
G01 X-4.55266 Y65.63196
G01 X-4.50455 Y65.61476
G01 X-4.45967 Y65.59617
G01 X-4.41380 Y65.57976
G01 X-4.35655 Y65.56239
G01 X-4.31068 Y65.54598
G01 X-4.26579 Y65.52739
G01 X-4.21769 Y65.51019
G01 X-4.16115 Y65.49305
G01 X-4.10783 Y65.47392
G01 X-4.06541 Y65.45637
G01 X-4.00430 Y65.43455
G01 X-3.95063 Y65.41827
G01 X-3.93252 Y65.41253
G01 X-3.89749 Y65.37511
G01 X-3.82655 Y65.29348
G01 X-3.82236 Y65.28779
G01 X-3.79767 Y65.25413
G01 X-3.75972 Y65.19670
G01 X-3.72277 Y65.13430
G01 X-3.68589 Y65.05835
G01 X-3.65886 Y64.99503
G01 X-3.64984 Y64.97057
G01 X-3.64611 Y64.96048
G01 X-3.61393 Y64.84476
G01 X-3.59874 Y64.77750
G01 X-3.59856 Y64.77636
G01 X-3.58449 Y64.62132
G01 X-3.58175 Y64.57199
G01 X-3.58134 Y64.55198
G01 X-3.57321 Y64.45729
G01 X-3.57192 Y64.44865
G01 X-3.54197 Y64.40405
G01 X-3.46366 Y64.30674
G01 X-3.45856 Y64.30143
G01 X-3.44898 Y64.29168
G01 X-1.91777 Y62.76049
G01 X-1.89407 Y62.73560
G01 X-1.87096 Y62.71010
G01 X-1.85053 Y62.68256
G01 X-1.81226 Y62.62526
G01 X-1.79968 Y62.60430
G01 X-1.77571 Y62.56702
G01 X-1.73603 Y62.50931
G01 X-1.69989 Y62.45635
G01 X-1.69384 Y62.44761
G01 X-1.64335 Y62.37563
G01 X-1.59450 Y62.31149
G01 X-1.57393 Y62.28647
G01 X-1.57294 Y62.26532
G01 X-1.57294 Y46.80926
G01 X-1.18196 Y46.41828
G01 X-1.14965 Y46.38265
G01 X-1.10614 Y46.32961
G01 X-1.05277 Y46.24975
G01 X-1.02041 Y46.18925
G01 X-0.98366 Y46.10050
G01 X-0.96374 Y46.03484
G01 X-0.94500 Y45.94063
G01 X-0.93829 Y45.87233
G01 X-0.93593 Y45.82430
G01 X-0.93593 Y14.56092
G01 X-0.93829 Y14.51291
G01 X-0.94500 Y14.44461
G01 X-0.96374 Y14.35040
G01 X-0.98366 Y14.28474
G01 X-1.02041 Y14.19599
G01 X-1.05277 Y14.13549
G01 X-1.10614 Y14.05563
G01 X-1.14965 Y14.00260
G01 X-1.18196 Y13.96696
G01 X-1.30154 Y13.84738
G01 X-1.39389 Y13.82289
G01 X-1.45506 Y13.79757
G01 X-1.64350 Y13.68838
G01 X-1.68005 Y13.65957
G01 X-1.74215 Y13.60440
G01 X-4.44906 Y10.89750
G01 X-4.47395 Y10.87380
G01 X-4.49947 Y10.85066
G01 X-4.52698 Y10.83024
G01 X-4.54260 Y10.81899
G01 X-4.58426 Y10.79199
G01 X-4.61375 Y10.77431
G01 X-4.64476 Y10.75963
G01 X-4.65149 Y10.75650
G01 X-4.70836 Y10.73331
G01 X-4.74072 Y10.72173
G01 X-4.77402 Y10.71337
G01 X-4.84149 Y10.69996
G01 X-4.87552 Y10.69491
G01 X-4.90979 Y10.69323
G01 X-4.94423 Y10.69237
G01 X-6.60615 Y10.69237
G01 X-6.71707 Y10.68361
G01 X-6.77824 Y10.67393
G01 X-7.03091 Y10.58955
G01 X-7.09213 Y10.55836
G01 X-7.09970 Y10.55264
G01 X-7.10376 Y10.54960
G01 X-7.14796 Y10.47301
G01 X-7.17961 Y10.37558
G01 X-7.19033 Y10.27370
G01 X-7.19033 Y10.21251
G01 X-7.17961 Y10.11066
G01 X-7.14826 Y10.01419
G01 X-7.14671 Y10.01325
G01 X-7.06853 Y9.96639
G01 X-7.05223 Y9.95684
G01 X-6.99403 Y9.92351
G01 X-6.91893 Y9.88523
G01 X-6.85121 Y9.85501
G01 X-6.82924 Y9.84563
G01 X-6.80193 Y9.83448
G01 X-6.75261 Y9.81650
G01 X-6.70381 Y9.80073
G01 X-6.64918 Y9.78053
G01 X-6.63968 Y9.77550
G01 X-6.50158 Y9.70124
G01 X-6.48177 Y9.69016
G01 X-6.44458 Y9.66242
G01 X-6.33221 Y9.57261
G01 X-6.32274 Y9.56364
G01 X-6.27786 Y9.51716
G01 X-6.27501 Y9.51391
G01 X-6.20404 Y9.43225
G01 X-6.17519 Y9.39296
G01 X-6.13727 Y9.33555
G01 X-6.10026 Y9.27312
G01 X-6.06340 Y9.19720
G01 X-6.03638 Y9.13380
G01 X-6.02360 Y9.09923
G01 X-5.99142 Y8.98356
G01 X-5.97623 Y8.91625
G01 X-5.97605 Y8.91518
G01 X-5.96198 Y8.76009
G01 X-5.95972 Y8.72562
G01 X-5.96198 Y8.69118
G01 X-5.97605 Y8.53604
G01 X-5.97623 Y8.53499
G01 X-5.98532 Y8.49123
G01 X-5.99142 Y8.46768
G01 X-6.02360 Y8.35201
G01 X-6.03638 Y8.31744
G01 X-6.06338 Y8.25410
G01 X-6.10026 Y8.17815
G01 X-6.13724 Y8.11572
G01 X-6.16803 Y8.06824
G01 X-6.17514 Y8.05821
G01 X-6.22736 Y7.97205
G01 X-6.25411 Y7.92016
G01 X-6.25604 Y7.91643
G01 X-6.29119 Y7.84914
G01 X-6.32485 Y7.77721
G01 X-6.32457 Y7.77675
G01 X-6.27529 Y7.70264
G01 X-6.25787 Y7.67744
G01 X-6.22091 Y7.62606
G01 X-6.13216 Y7.52367
G01 X-6.12444 Y7.51628
G01 X-6.11047 Y7.50327
G01 X-6.09523 Y7.48945
G01 X-6.04659 Y7.44081
G01 X-5.99279 Y7.38145
G01 X-5.87189 Y7.22915
G01 X-5.85108 Y7.20157
G01 X-5.83356 Y7.17178
G01 X-5.73910 Y7.00177
G01 X-5.70486 Y6.92938
G01 X-5.67852 Y6.86581
G01 X-5.65154 Y6.79040
G01 X-5.63435 Y6.73022
G01 X-5.59813 Y6.60340
G01 X-5.58946 Y6.56995
G01 X-5.58466 Y6.53574
G01 X-5.56246 Y6.34254
G01 X-5.55853 Y6.26253
G01 X-5.55769 Y6.22812
G01 X-5.55769 Y5.52812
G01 X-5.55853 Y5.49373
G01 X-5.56246 Y5.41372
G01 X-5.58466 Y5.22052
G01 X-5.58946 Y5.18631
G01 X-5.59813 Y5.15286
G01 X-5.61476 Y5.09462
G01 X-5.65152 Y4.96586
G01 X-5.67852 Y4.89045
G01 X-5.70486 Y4.82687
G01 X-5.73910 Y4.75446
G01 X-5.83356 Y4.58448
G01 X-5.83772 Y4.57709
G01 X-5.85106 Y4.55474
G01 X-5.87189 Y4.52713
G01 X-5.99279 Y4.37478
G01 X-6.04659 Y4.31544
G01 X-6.09525 Y4.26675
G01 X-6.15459 Y4.21298
G01 X-6.30691 Y4.09210
G01 X-6.33450 Y4.07127
G01 X-6.36427 Y4.05377
G01 X-6.53427 Y3.95929
G01 X-6.60666 Y3.92505
G01 X-6.67026 Y3.89871
G01 X-6.74562 Y3.87176
G01 X-6.93267 Y3.81834
G01 X-6.96609 Y3.80968
G01 X-7.00031 Y3.80488
G01 X-7.19353 Y3.78265
G01 X-7.27351 Y3.77872
G01 X-7.34232 Y3.77872
G01 X-7.42233 Y3.78265
G01 X-7.61552 Y3.80488
G01 X-7.64973 Y3.80968
G01 X-7.68316 Y3.81834
G01 X-7.87018 Y3.87173
G01 X-7.94557 Y3.89871
G01 X-8.00920 Y3.92505
G01 X-8.08161 Y3.95931
G01 X-8.25159 Y4.05377
G01 X-8.28133 Y4.07127
G01 X-8.30889 Y4.09208
G01 X-8.46126 Y4.21298
G01 X-8.52057 Y4.26675
G01 X-8.56929 Y4.31544
G01 X-8.62306 Y4.37478
G01 X-8.69931 Y4.47087
G01 X-8.74679 Y4.52482
G01 X-8.77485 Y4.55362
G01 X-8.79652 Y4.57684
G01 X-8.81722 Y4.59998
G01 X-9.02200 Y4.76751
G01 X-9.04082 Y4.77899
G01 X-9.04315 Y4.78044
G01 X-9.07343 Y4.77966
G01 X-9.07526 Y4.77846
G01 X-9.07528 Y4.77844
G01 X-9.09301 Y4.76706
G01 X-9.10330 Y4.76068
G01 X-9.30909 Y4.58931
G01 X-9.31976 Y4.57706
G01 X-9.34770 Y4.54676
G01 X-9.36906 Y4.52482
G01 X-9.41653 Y4.47087
G01 X-9.49278 Y4.37478
G01 X-9.54656 Y4.31544
G01 X-9.59527 Y4.26675
G01 X-9.65458 Y4.21298
G01 X-9.80696 Y4.09208
G01 X-9.83452 Y4.07127
G01 X-9.86426 Y4.05377
G01 X-10.03426 Y3.95929
G01 X-10.10665 Y3.92505
G01 X-10.17028 Y3.89871
G01 X-10.17996 Y3.89523
G01 X-10.24561 Y3.87176
G01 X-10.43269 Y3.81834
G01 X-10.46611 Y3.80968
G01 X-10.50033 Y3.80488
G01 X-10.69352 Y3.78265
G01 X-10.77353 Y3.77872
G01 X-10.84234 Y3.77872
G01 X-10.92232 Y3.78265
G01 X-11.11554 Y3.80488
G01 X-11.14975 Y3.80968
G01 X-11.18318 Y3.81834
G01 X-11.37020 Y3.87173
G01 X-11.44559 Y3.89871
G01 X-11.50919 Y3.92505
G01 X-11.58158 Y3.95929
G01 X-11.75158 Y4.05377
G01 X-11.78135 Y4.07127
G01 X-11.80893 Y4.09208
G01 X-11.96128 Y4.21301
G01 X-12.02059 Y4.26675
G01 X-12.06928 Y4.31544
G01 X-12.12306 Y4.37478
G01 X-12.19931 Y4.47084
G01 X-12.24678 Y4.52482
G01 X-12.27485 Y4.55362
G01 X-12.29656 Y4.57686
G01 X-12.31721 Y4.59998
G01 X-12.52201 Y4.76754
G01 X-12.54081 Y4.77902
G01 X-12.54261 Y4.78011
G01 X-12.54315 Y4.78044
G01 X-12.57342 Y4.77966
G01 X-12.57528 Y4.77844
G01 X-12.57530 Y4.77844
G01 X-12.59301 Y4.76706
G01 X-12.60329 Y4.76068
G01 X-12.80908 Y4.58931
G01 X-12.81975 Y4.57706
G01 X-12.84769 Y4.54676
G01 X-12.86905 Y4.52482
G01 X-12.91650 Y4.47089
G01 X-12.99278 Y4.37480
G01 X-13.04657 Y4.31544
G01 X-13.09527 Y4.26675
G01 X-13.15460 Y4.21298
G01 X-13.30692 Y4.09208
G01 X-13.33448 Y4.07127
G01 X-13.36425 Y4.05377
G01 X-13.53428 Y3.95929
G01 X-13.60664 Y3.92505
G01 X-13.67027 Y3.89871
G01 X-13.74563 Y3.87173
G01 X-13.93268 Y3.81834
G01 X-13.96611 Y3.80968
G01 X-14.00032 Y3.80488
G01 X-14.19354 Y3.78265
G01 X-14.27352 Y3.77872
G01 X-14.34233 Y3.77872
G01 X-14.42231 Y3.78265
G01 X-14.61553 Y3.80488
G01 X-14.64975 Y3.80968
G01 X-14.68317 Y3.81834
G01 X-14.87019 Y3.87173
G01 X-14.94558 Y3.89871
G01 X-15.00921 Y3.92507
G01 X-15.08157 Y3.95929
G01 X-15.25160 Y4.05377
G01 X-15.28132 Y4.07127
G01 X-15.30893 Y4.09210
G01 X-15.46128 Y4.21301
G01 X-15.52059 Y4.26675
G01 X-15.56928 Y4.31544
G01 X-15.62302 Y4.37478
G01 X-15.69930 Y4.47084
G01 X-15.74675 Y4.52482
G01 X-15.77492 Y4.55367
G01 X-15.79653 Y4.57686
G01 X-15.81728 Y4.60005
G01 X-16.02201 Y4.76754
G01 X-16.04080 Y4.77902
G01 X-16.05792 Y4.82032
G01 X-16.05792 Y6.93584
G01 X-16.03351 Y6.99487
G01 X-15.90410 Y7.23690
G01 X-15.85076 Y7.31676
G01 X-15.67667 Y7.52893
G01 X-15.60875 Y7.59685
G01 X-15.39658 Y7.77094
G01 X-15.31672 Y7.82430
G01 X-15.19950 Y7.88696
G01 X-15.26788 Y7.97030
G01 X-15.32125 Y8.05018
G01 X-15.39519 Y8.18849
G01 X-15.43194 Y8.27724
G01 X-15.47746 Y8.42730
G01 X-15.49618 Y8.52151
G01 X-15.51157 Y8.67759
G01 X-15.51157 Y8.77365
G01 X-15.49618 Y8.92971
G01 X-15.47746 Y9.02392
G01 X-15.43194 Y9.17401
G01 X-15.39519 Y9.26276
G01 X-15.32125 Y9.40106
G01 X-15.26788 Y9.48092
G01 X-15.16839 Y9.60215
G01 X-15.10047 Y9.67007
G01 X-14.97924 Y9.76956
G01 X-14.89938 Y9.82293
G01 X-14.76107 Y9.89687
G01 X-14.67233 Y9.93362
G01 X-14.52224 Y9.97914
G01 X-14.42803 Y9.99788
G01 X-14.27197 Y10.01325
G01 X-14.17591 Y10.01325
G01 X-14.01983 Y9.99788
G01 X-13.92562 Y9.97914
G01 X-13.77555 Y9.93362
G01 X-13.68681 Y9.89687
G01 X-13.54850 Y9.82293
G01 X-13.46862 Y9.76956
G01 X-13.34739 Y9.67007
G01 X-13.27947 Y9.60215
G01 X-13.17998 Y9.48092
G01 X-13.12661 Y9.40106
G01 X-13.05270 Y9.26276
G01 X-13.01594 Y9.17401
G01 X-12.97040 Y9.02392
G01 X-12.95168 Y8.92971
G01 X-12.93629 Y8.77365
G01 X-12.93629 Y8.67759
G01 X-12.95168 Y8.52151
G01 X-12.97040 Y8.42730
G01 X-13.01594 Y8.27724
G01 X-13.05270 Y8.18849
G01 X-13.12661 Y8.05018
G01 X-13.17998 Y7.97030
G01 X-13.27947 Y7.84907
G01 X-13.30248 Y7.82608
G01 X-13.29915 Y7.82430
G01 X-13.21929 Y7.77094
G01 X-13.00713 Y7.59685
G01 X-12.93921 Y7.52893
G01 X-12.80294 Y7.36286
G01 X-12.76512 Y7.31676
G01 X-12.71173 Y7.23690
G01 X-12.58236 Y6.99487
G01 X-12.55790 Y6.93584
G01 X-12.55790 Y6.90241
G01 X-12.55793 Y6.61559
G01 X-12.55793 Y5.14067
G01 X-12.55790 Y4.85385
G01 X-12.55790 Y4.82030
G01 X-12.54081 Y4.77902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-12.55790 Y4.82030 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-12.55790 Y4.82030
G01 X-12.57528 Y4.77844
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.05792 Y6.93584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.05792 Y6.93584
G01 X-16.08236 Y6.99487
G01 X-16.21172 Y7.23690
G01 X-16.26511 Y7.31676
G01 X-16.30293 Y7.36284
G01 X-16.43920 Y7.52893
G01 X-16.50715 Y7.59685
G01 X-16.71929 Y7.77094
G01 X-16.79915 Y7.82430
G01 X-16.83897 Y7.84559
G01 X-16.83544 Y7.84907
G01 X-16.73595 Y7.97030
G01 X-16.68261 Y8.05018
G01 X-16.60870 Y8.18849
G01 X-16.57194 Y8.27724
G01 X-16.52637 Y8.42730
G01 X-16.50765 Y8.52151
G01 X-16.49229 Y8.67759
G01 X-16.49229 Y8.77365
G01 X-16.50765 Y8.92971
G01 X-16.52637 Y9.02392
G01 X-16.57194 Y9.17401
G01 X-16.60870 Y9.26276
G01 X-16.68261 Y9.40106
G01 X-16.73595 Y9.48092
G01 X-16.83544 Y9.60215
G01 X-16.90339 Y9.67007
G01 X-17.02460 Y9.76956
G01 X-17.10450 Y9.82293
G01 X-17.24281 Y9.89687
G01 X-17.33155 Y9.93362
G01 X-17.48159 Y9.97914
G01 X-17.57583 Y9.99788
G01 X-17.73191 Y10.01325
G01 X-17.82797 Y10.01325
G01 X-17.98403 Y9.99788
G01 X-18.07824 Y9.97914
G01 X-18.22833 Y9.93362
G01 X-18.31707 Y9.89687
G01 X-18.45538 Y9.82293
G01 X-18.53524 Y9.76956
G01 X-18.65647 Y9.67007
G01 X-18.72439 Y9.60215
G01 X-18.82388 Y9.48092
G01 X-18.87725 Y9.40106
G01 X-18.95119 Y9.26276
G01 X-18.98794 Y9.17401
G01 X-19.03346 Y9.02392
G01 X-19.05220 Y8.92971
G01 X-19.06757 Y8.77365
G01 X-19.06757 Y8.67759
G01 X-19.05220 Y8.52151
G01 X-19.03346 Y8.42730
G01 X-18.98794 Y8.27724
G01 X-18.95119 Y8.18849
G01 X-18.87725 Y8.05018
G01 X-18.82388 Y7.97030
G01 X-18.73841 Y7.86616
G01 X-18.81672 Y7.82430
G01 X-18.89660 Y7.77094
G01 X-19.10874 Y7.59685
G01 X-19.17666 Y7.52893
G01 X-19.35078 Y7.31676
G01 X-19.40414 Y7.23690
G01 X-19.53351 Y6.99487
G01 X-19.55794 Y6.93586
G01 X-19.55792 Y6.90236
G01 X-19.55792 Y4.85390
G01 X-19.55794 Y4.82032
G01 X-19.57526 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.54082 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.54082 Y4.77899
G01 X-19.55794 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.55794 Y6.93586 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.55794 Y6.93586
G01 X-19.58238 Y6.99487
G01 X-19.71174 Y7.23690
G01 X-19.76510 Y7.31676
G01 X-19.80292 Y7.36284
G01 X-19.93922 Y7.52893
G01 X-20.00714 Y7.59685
G01 X-20.21928 Y7.77094
G01 X-20.29916 Y7.82430
G01 X-20.37745 Y7.86616
G01 X-20.29198 Y7.97030
G01 X-20.23861 Y8.05018
G01 X-20.16470 Y8.18849
G01 X-20.12794 Y8.27724
G01 X-20.08240 Y8.42730
G01 X-20.06368 Y8.52151
G01 X-20.04829 Y8.67759
G01 X-20.04829 Y8.77365
G01 X-20.06368 Y8.92971
G01 X-20.08240 Y9.02392
G01 X-20.12794 Y9.17401
G01 X-20.16470 Y9.26276
G01 X-20.23861 Y9.40106
G01 X-20.29198 Y9.48092
G01 X-20.39147 Y9.60215
G01 X-20.45939 Y9.67007
G01 X-20.58062 Y9.76956
G01 X-20.66050 Y9.82293
G01 X-20.79881 Y9.89687
G01 X-20.88755 Y9.93362
G01 X-21.03762 Y9.97914
G01 X-21.13183 Y9.99788
G01 X-21.28791 Y10.01325
G01 X-21.30361 Y10.01325
G01 X-21.30503 Y10.01231
G01 X-21.30505 Y10.01231
G01 X-21.37917 Y9.96468
G01 X-21.52908 Y9.88691
G01 X-21.53398 Y9.88495
G01 X-21.59134 Y9.85940
G01 X-21.59705 Y9.85656
G01 X-21.69522 Y9.81650
G01 X-21.74402 Y9.80073
G01 X-21.79865 Y9.78053
G01 X-21.80818 Y9.77550
G01 X-21.94628 Y9.70124
G01 X-21.96606 Y9.69019
G01 X-22.00327 Y9.66240
G01 X-22.06815 Y9.61056
G01 X-22.11564 Y9.57258
G01 X-22.12509 Y9.56364
G01 X-22.17285 Y9.51391
G01 X-22.24384 Y9.43225
G01 X-22.27267 Y9.39296
G01 X-22.31061 Y9.33550
G01 X-22.34757 Y9.27312
G01 X-22.38445 Y9.19715
G01 X-22.41145 Y9.13388
G01 X-22.42423 Y9.09926
G01 X-22.45641 Y8.98361
G01 X-22.47163 Y8.91625
G01 X-22.47180 Y8.91516
G01 X-22.48588 Y8.76009
G01 X-22.48814 Y8.72562
G01 X-22.48588 Y8.69118
G01 X-22.47180 Y8.53609
G01 X-22.47163 Y8.53499
G01 X-22.45641 Y8.46763
G01 X-22.42423 Y8.35199
G01 X-22.41145 Y8.31739
G01 X-22.38448 Y8.25412
G01 X-22.34760 Y8.17818
G01 X-22.34005 Y8.16545
G01 X-22.31963 Y8.12852
G01 X-22.31255 Y8.11473
G01 X-22.30884 Y8.10759
G01 X-22.27968 Y8.05250
G01 X-22.23881 Y7.96108
G01 X-22.21658 Y7.90142
G01 X-22.21623 Y7.90045
G01 X-22.19057 Y7.83187
G01 X-22.26855 Y7.73428
G01 X-22.31869 Y7.68006
G01 X-22.36048 Y7.63456
G01 X-22.44259 Y7.55808
G01 X-22.46124 Y7.54328
G01 X-22.52060 Y7.48948
G01 X-22.56926 Y7.44081
G01 X-22.62306 Y7.38148
G01 X-22.69931 Y7.28542
G01 X-22.74678 Y7.23147
G01 X-22.76817 Y7.20952
G01 X-22.79611 Y7.17917
G01 X-22.80675 Y7.16698
G01 X-23.01254 Y6.99558
G01 X-23.02288 Y6.98918
G01 X-23.04059 Y6.97780
G01 X-23.04059 Y6.97777
G01 X-23.05793 Y6.93584
G01 X-23.05793 Y4.82030
G01 X-23.07526 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.04081 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.04081 Y4.77899
G01 X-23.05793 Y4.82030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.05793 Y6.93584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.05793 Y6.93584
G01 X-23.07505 Y6.97726
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-23.02288 Y6.98918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-23.02288 Y6.98918
G01 X-23.04059 Y6.97777
G01 X-23.04241 Y6.97660
G01 X-23.07269 Y6.97582
G01 X-23.07322 Y6.97615
G01 X-23.07505 Y6.97726
G01 X-23.07508 Y6.97729
G01 X-23.09385 Y6.98874
G01 X-23.29862 Y7.15628
G01 X-23.31933 Y7.17942
G01 X-23.34099 Y7.20264
G01 X-23.36906 Y7.23144
G01 X-23.41653 Y7.28537
G01 X-23.49278 Y7.38145
G01 X-23.54655 Y7.44079
G01 X-23.59525 Y7.48948
G01 X-23.65458 Y7.54325
G01 X-23.74897 Y7.61816
G01 X-23.75963 Y7.62679
G01 X-23.76522 Y7.63141
G01 X-23.80485 Y7.66672
G01 X-23.85676 Y7.71658
G01 X-23.85727 Y7.71706
G01 X-23.90307 Y7.76116
G01 X-23.99893 Y7.87076
G01 X-23.99438 Y7.88755
G01 X-23.95821 Y7.99418
G01 X-23.93764 Y8.04383
G01 X-23.93380 Y8.05323
G01 X-23.91033 Y8.11201
G01 X-23.88948 Y8.15918
G01 X-23.84338 Y8.25410
G01 X-23.81638 Y8.31744
G01 X-23.80360 Y8.35201
G01 X-23.77142 Y8.46768
G01 X-23.75623 Y8.53499
G01 X-23.75605 Y8.53606
G01 X-23.74198 Y8.69118
G01 X-23.73972 Y8.72562
G01 X-23.74198 Y8.76009
G01 X-23.75605 Y8.91518
G01 X-23.75623 Y8.91625
G01 X-23.77142 Y8.98356
G01 X-23.80360 Y9.09923
G01 X-23.81638 Y9.13380
G01 X-23.84340 Y9.19720
G01 X-23.88026 Y9.27312
G01 X-23.91727 Y9.33555
G01 X-23.95519 Y9.39296
G01 X-23.98404 Y9.43225
G01 X-24.05501 Y9.51391
G01 X-24.05786 Y9.51716
G01 X-24.10274 Y9.56364
G01 X-24.11221 Y9.57261
G01 X-24.22458 Y9.66242
G01 X-24.26177 Y9.69016
G01 X-24.28158 Y9.70124
G01 X-24.41968 Y9.77550
G01 X-24.42918 Y9.78053
G01 X-24.48381 Y9.80073
G01 X-24.60939 Y9.84132
G01 X-24.63365 Y9.84701
G01 X-24.70147 Y9.85940
G01 X-24.79692 Y9.87205
G01 X-24.85752 Y9.87502
G01 X-24.92633 Y9.87502
G01 X-24.98694 Y9.87205
G01 X-25.08236 Y9.85940
G01 X-25.15016 Y9.84701
G01 X-25.17444 Y9.84132
G01 X-25.30002 Y9.80073
G01 X-25.35465 Y9.78053
G01 X-25.36418 Y9.77550
G01 X-25.50228 Y9.70124
G01 X-25.52206 Y9.69019
G01 X-25.55927 Y9.66240
G01 X-25.62415 Y9.61056
G01 X-25.67164 Y9.57258
G01 X-25.68109 Y9.56364
G01 X-25.72885 Y9.51391
G01 X-25.79984 Y9.43225
G01 X-25.82867 Y9.39296
G01 X-25.86661 Y9.33550
G01 X-25.90357 Y9.27312
G01 X-25.94045 Y9.19715
G01 X-25.96745 Y9.13388
G01 X-25.98023 Y9.09926
G01 X-26.01241 Y8.98361
G01 X-26.02763 Y8.91625
G01 X-26.02780 Y8.91516
G01 X-26.04187 Y8.76009
G01 X-26.04414 Y8.72562
G01 X-26.04187 Y8.69118
G01 X-26.02780 Y8.53609
G01 X-26.02763 Y8.53499
G01 X-26.01241 Y8.46763
G01 X-25.98023 Y8.35199
G01 X-25.96745 Y8.31739
G01 X-25.94048 Y8.25412
G01 X-25.90360 Y8.17818
G01 X-25.87860 Y8.13596
G01 X-25.86697 Y8.11559
G01 X-25.85795 Y8.09916
G01 X-25.84629 Y8.07868
G01 X-25.83238 Y8.05519
G01 X-25.77406 Y7.93251
G01 X-25.76484 Y7.90777
G01 X-25.75054 Y7.87193
G01 X-25.73126 Y7.82651
G01 X-25.72592 Y7.81374
G01 X-25.77538 Y7.74704
G01 X-25.82600 Y7.68493
G01 X-25.85534 Y7.65100
G01 X-25.87848 Y7.62583
G01 X-25.95079 Y7.55275
G01 X-26.02062 Y7.48945
G01 X-26.05783 Y7.45316
G01 X-26.06941 Y7.44094
G01 X-26.09676 Y7.41374
G01 X-26.11947 Y7.39230
G01 X-26.26740 Y7.28338
G01 X-26.29250 Y7.26898
G01 X-26.32407 Y7.25003
G01 X-26.37218 Y7.21981
G01 X-26.39991 Y7.20297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.05795 Y6.93586 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.05795 Y6.93586
G01 X-30.07506 Y6.97726
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.02284 Y6.98920 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.02284 Y6.98920
G01 X-30.04057 Y6.97782
G01 X-30.04057 Y6.97777
G01 X-30.05795 Y6.93586
G01 X-30.05792 Y6.90236
G01 X-30.05792 Y4.85390
G01 X-30.05795 Y4.82032
G01 X-30.07527 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.05795 Y4.82032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.05795 Y4.82032
G01 X-30.04080 Y4.77899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.59298 Y4.76708 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.59298 Y4.76708
G01 X-26.57530 Y4.77846
G01 X-26.55793 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.54081 Y4.77902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.54081 Y4.77902
G01 X-26.55793 Y4.82032
G01 X-26.55793 Y6.56009
G01 X-26.55272 Y6.57467
G01 X-26.53916 Y6.60990
G01 X-26.52717 Y6.63883
G01 X-26.50276 Y6.70703
G01 X-26.48284 Y6.77269
G01 X-26.46524 Y6.84297
G01 X-26.45937 Y6.87251
G01 X-26.45079 Y6.91049
G01 X-26.44185 Y6.94587
G01 X-26.43265 Y6.98664
G01 X-26.41866 Y7.05694
G01 X-26.40553 Y7.14607
G01 X-26.39991 Y7.20297
G01 X-26.41531 Y7.21480
G01 X-26.49247 Y7.27526
G01 X-26.54848 Y7.32311
G01 X-26.56273 Y7.33642
G01 X-26.60517 Y7.37325
G01 X-26.61048 Y7.37752
G01 X-26.65765 Y7.41892
G01 X-26.69341 Y7.45321
G01 X-26.70769 Y7.46649
G01 X-26.73316 Y7.48961
G01 X-26.76069 Y7.51003
G01 X-26.81805 Y7.54833
G01 X-26.84741 Y7.56593
G01 X-26.87858 Y7.58067
G01 X-26.92981 Y7.60246
G01 X-26.94205 Y7.60708
G01 X-26.98477 Y7.62489
G01 X-27.00550 Y7.63434
G01 X-27.01510 Y7.63863
G01 X-27.07289 Y7.66393
G01 X-27.13862 Y7.69634
G01 X-27.19458 Y7.72702
G01 X-27.22168 Y7.74135
G01 X-27.24510 Y7.75331
G01 X-27.25386 Y7.76324
G01 X-27.29755 Y7.81206
G01 X-27.28381 Y7.87724
G01 X-27.23560 Y8.03469
G01 X-27.23380 Y8.03903
G01 X-27.21337 Y8.09397
G01 X-27.20817 Y8.10980
G01 X-27.17190 Y8.19949
G01 X-27.14538 Y8.25410
G01 X-27.11838 Y8.31744
G01 X-27.10560 Y8.35201
G01 X-27.07342 Y8.46768
G01 X-27.06732 Y8.49123
G01 X-27.05823 Y8.53499
G01 X-27.05805 Y8.53604
G01 X-27.04398 Y8.69118
G01 X-27.04172 Y8.72562
G01 X-27.04398 Y8.76009
G01 X-27.05805 Y8.91518
G01 X-27.05823 Y8.91625
G01 X-27.07342 Y8.98356
G01 X-27.10560 Y9.09923
G01 X-27.11838 Y9.13380
G01 X-27.14540 Y9.19720
G01 X-27.18226 Y9.27312
G01 X-27.21927 Y9.33555
G01 X-27.25719 Y9.39296
G01 X-27.28604 Y9.43225
G01 X-27.35701 Y9.51391
G01 X-27.35986 Y9.51716
G01 X-27.40474 Y9.56364
G01 X-27.41421 Y9.57261
G01 X-27.52658 Y9.66242
G01 X-27.56377 Y9.69016
G01 X-27.58358 Y9.70124
G01 X-27.72168 Y9.77550
G01 X-27.73118 Y9.78053
G01 X-27.78581 Y9.80073
G01 X-27.91139 Y9.84132
G01 X-27.93565 Y9.84701
G01 X-28.00347 Y9.85940
G01 X-28.09892 Y9.87205
G01 X-28.15952 Y9.87502
G01 X-28.22833 Y9.87502
G01 X-28.28894 Y9.87205
G01 X-28.38436 Y9.85940
G01 X-28.45216 Y9.84701
G01 X-28.47644 Y9.84132
G01 X-28.60202 Y9.80073
G01 X-28.65665 Y9.78053
G01 X-28.66618 Y9.77550
G01 X-28.80428 Y9.70124
G01 X-28.82406 Y9.69019
G01 X-28.86127 Y9.66240
G01 X-28.92615 Y9.61056
G01 X-28.97364 Y9.57258
G01 X-28.98309 Y9.56364
G01 X-29.03085 Y9.51391
G01 X-29.10184 Y9.43225
G01 X-29.13067 Y9.39296
G01 X-29.16861 Y9.33550
G01 X-29.20557 Y9.27312
G01 X-29.24245 Y9.19715
G01 X-29.26945 Y9.13388
G01 X-29.28223 Y9.09926
G01 X-29.31441 Y8.98361
G01 X-29.32963 Y8.91625
G01 X-29.32980 Y8.91516
G01 X-29.34387 Y8.76009
G01 X-29.34614 Y8.72562
G01 X-29.34387 Y8.69118
G01 X-29.32980 Y8.53609
G01 X-29.32963 Y8.53499
G01 X-29.31441 Y8.46763
G01 X-29.28223 Y8.35201
G01 X-29.26945 Y8.31739
G01 X-29.24248 Y8.25412
G01 X-29.20456 Y8.17604
G01 X-29.19897 Y8.16426
G01 X-29.19595 Y8.15773
G01 X-29.17649 Y8.11155
G01 X-29.15012 Y8.04229
G01 X-29.14812 Y8.03698
G01 X-29.12554 Y7.97637
G01 X-29.09661 Y7.88333
G01 X-29.09620 Y7.88173
G01 X-29.21342 Y7.75212
G01 X-29.25718 Y7.71297
G01 X-29.26036 Y7.71013
G01 X-29.30986 Y7.66530
G01 X-29.34476 Y7.63571
G01 X-29.44266 Y7.55803
G01 X-29.46122 Y7.54328
G01 X-29.52061 Y7.48945
G01 X-29.56925 Y7.44081
G01 X-29.62305 Y7.38148
G01 X-29.69930 Y7.28542
G01 X-29.74677 Y7.23147
G01 X-29.76821 Y7.20944
G01 X-29.79610 Y7.17919
G01 X-29.80682 Y7.16687
G01 X-30.01256 Y6.99558
G01 X-30.02284 Y6.98920
G01 X-30.04057 Y6.97777
G01 X-30.04243 Y6.97660
G01 X-30.07270 Y6.97582
G01 X-30.07324 Y6.97615
G01 X-30.07506 Y6.97726
G01 X-30.07509 Y6.97729
G01 X-30.09384 Y6.98872
G01 X-30.29864 Y7.15628
G01 X-30.31929 Y7.17940
G01 X-30.34100 Y7.20264
G01 X-30.36907 Y7.23147
G01 X-30.41657 Y7.28542
G01 X-30.46945 Y7.35207
G01 X-30.49279 Y7.38145
G01 X-30.53991 Y7.43342
G01 X-30.54654 Y7.44086
G01 X-30.55297 Y7.44815
G01 X-30.56005 Y7.45608
G01 X-30.59292 Y7.49227
G01 X-30.64588 Y7.55775
G01 X-30.68284 Y7.60914
G01 X-30.73061 Y7.68364
G01 X-30.73209 Y7.78724
G01 X-30.69579 Y7.84897
G01 X-30.68665 Y7.86311
G01 X-30.66231 Y7.90330
G01 X-30.64814 Y7.92839
G01 X-30.60265 Y7.99905
G01 X-30.60064 Y8.00182
G01 X-30.59955 Y8.00330
G01 X-30.55921 Y8.05826
G01 X-30.52124 Y8.11572
G01 X-30.48426 Y8.17815
G01 X-30.44738 Y8.25410
G01 X-30.42038 Y8.31744
G01 X-30.40760 Y8.35201
G01 X-30.37542 Y8.46768
G01 X-30.36932 Y8.49123
G01 X-30.36023 Y8.53499
G01 X-30.36005 Y8.53604
G01 X-30.34598 Y8.69118
G01 X-30.34372 Y8.72562
G01 X-30.34598 Y8.76009
G01 X-30.36005 Y8.91518
G01 X-30.36023 Y8.91625
G01 X-30.37542 Y8.98356
G01 X-30.40760 Y9.09923
G01 X-30.42038 Y9.13380
G01 X-30.44740 Y9.19720
G01 X-30.48426 Y9.27312
G01 X-30.52127 Y9.33555
G01 X-30.55919 Y9.39296
G01 X-30.58804 Y9.43225
G01 X-30.65901 Y9.51391
G01 X-30.66186 Y9.51716
G01 X-30.70674 Y9.56364
G01 X-30.71621 Y9.57261
G01 X-30.82858 Y9.66242
G01 X-30.86577 Y9.69016
G01 X-30.88558 Y9.70124
G01 X-31.02368 Y9.77550
G01 X-31.03318 Y9.78053
G01 X-31.08781 Y9.80073
G01 X-31.21339 Y9.84132
G01 X-31.23765 Y9.84701
G01 X-31.30547 Y9.85940
G01 X-31.40092 Y9.87205
G01 X-31.46152 Y9.87502
G01 X-31.53033 Y9.87502
G01 X-31.59094 Y9.87205
G01 X-31.68636 Y9.85940
G01 X-31.75416 Y9.84701
G01 X-31.77844 Y9.84132
G01 X-31.90402 Y9.80073
G01 X-31.95865 Y9.78053
G01 X-31.96818 Y9.77550
G01 X-32.10628 Y9.70124
G01 X-32.12606 Y9.69019
G01 X-32.16327 Y9.66240
G01 X-32.22815 Y9.61056
G01 X-32.27564 Y9.57258
G01 X-32.28509 Y9.56364
G01 X-32.33285 Y9.51391
G01 X-32.40384 Y9.43225
G01 X-32.43267 Y9.39296
G01 X-32.47061 Y9.33550
G01 X-32.50757 Y9.27312
G01 X-32.54445 Y9.19715
G01 X-32.57145 Y9.13388
G01 X-32.58423 Y9.09926
G01 X-32.61641 Y8.98361
G01 X-32.63163 Y8.91625
G01 X-32.63180 Y8.91516
G01 X-32.64587 Y8.76009
G01 X-32.64814 Y8.72562
G01 X-32.64587 Y8.69118
G01 X-32.63180 Y8.53609
G01 X-32.63163 Y8.53499
G01 X-32.61641 Y8.46763
G01 X-32.58423 Y8.35199
G01 X-32.57145 Y8.31739
G01 X-32.55593 Y8.27891
G01 X-32.54496 Y8.25387
G01 X-32.54158 Y8.24609
G01 X-32.53371 Y8.22748
G01 X-32.49375 Y8.10340
G01 X-32.48817 Y8.07896
G01 X-32.47376 Y8.02451
G01 X-32.47112 Y8.01567
G01 X-32.45324 Y7.94630
G01 X-32.46800 Y7.93131
G01 X-32.52985 Y7.86984
G01 X-32.59947 Y7.80827
G01 X-32.64839 Y7.76997
G01 X-32.74194 Y7.70784
G01 X-32.75156 Y7.70248
G01 X-32.78136 Y7.68496
G01 X-32.80892 Y7.66416
G01 X-32.96127 Y7.54325
G01 X-33.02060 Y7.48948
G01 X-33.06929 Y7.44079
G01 X-33.12306 Y7.38148
G01 X-33.24397 Y7.22913
G01 X-33.26477 Y7.20155
G01 X-33.28227 Y7.17180
G01 X-33.35019 Y7.04960
G01 X-33.37673 Y7.00180
G01 X-33.41100 Y6.92941
G01 X-33.43734 Y6.86578
G01 X-33.45522 Y6.81585
G01 X-33.46434 Y6.79037
G01 X-33.51770 Y6.60338
G01 X-33.52637 Y6.56997
G01 X-33.53117 Y6.53574
G01 X-33.55339 Y6.34252
G01 X-33.55733 Y6.26253
G01 X-33.55817 Y6.22812
G01 X-33.55817 Y5.52812
G01 X-33.55733 Y5.49373
G01 X-33.55339 Y5.41374
G01 X-33.53117 Y5.22052
G01 X-33.52637 Y5.18628
G01 X-33.51770 Y5.15288
G01 X-33.46431 Y4.96586
G01 X-33.43734 Y4.89048
G01 X-33.41100 Y4.82685
G01 X-33.37676 Y4.75446
G01 X-33.30683 Y4.62863
G01 X-33.28227 Y4.58446
G01 X-33.26475 Y4.55469
G01 X-33.24397 Y4.52713
G01 X-33.12306 Y4.37480
G01 X-33.06929 Y4.31544
G01 X-33.02058 Y4.26675
G01 X-32.96127 Y4.21298
G01 X-32.80889 Y4.09208
G01 X-32.78133 Y4.07127
G01 X-32.75159 Y4.05377
G01 X-32.58161 Y3.95931
G01 X-32.50920 Y3.92505
G01 X-32.44557 Y3.89871
G01 X-32.37018 Y3.87173
G01 X-32.18316 Y3.81834
G01 X-32.14974 Y3.80968
G01 X-32.11552 Y3.80488
G01 X-31.92233 Y3.78265
G01 X-31.84232 Y3.77872
G01 X-31.77351 Y3.77872
G01 X-31.69353 Y3.78265
G01 X-31.50031 Y3.80488
G01 X-31.46610 Y3.80968
G01 X-31.43267 Y3.81834
G01 X-31.24562 Y3.87176
G01 X-31.17026 Y3.89871
G01 X-31.10666 Y3.92505
G01 X-31.03427 Y3.95929
G01 X-30.86427 Y4.05377
G01 X-30.83450 Y4.07127
G01 X-30.80691 Y4.09208
G01 X-30.65457 Y4.21301
G01 X-30.59526 Y4.26675
G01 X-30.54656 Y4.31544
G01 X-30.49279 Y4.37478
G01 X-30.41654 Y4.47084
G01 X-30.36907 Y4.52482
G01 X-30.34768 Y4.54674
G01 X-30.31974 Y4.57709
G01 X-30.30910 Y4.58928
G01 X-30.10331 Y4.76068
G01 X-30.09297 Y4.76708
G01 X-30.07529 Y4.77846
G01 X-30.07527 Y4.77846
G01 X-30.07344 Y4.77966
G01 X-30.04316 Y4.78044
G01 X-30.04263 Y4.78011
G01 X-30.04080 Y4.77899
G01 X-30.02200 Y4.76751
G01 X-29.81723 Y4.59998
G01 X-29.79653 Y4.57684
G01 X-29.77486 Y4.55362
G01 X-29.74680 Y4.52482
G01 X-29.69935 Y4.47089
G01 X-29.62307 Y4.37480
G01 X-29.56927 Y4.31544
G01 X-29.52058 Y4.26675
G01 X-29.46125 Y4.21298
G01 X-29.30892 Y4.09208
G01 X-29.28137 Y4.07127
G01 X-29.25160 Y4.05377
G01 X-29.08159 Y3.95929
G01 X-29.00920 Y3.92507
G01 X-28.94558 Y3.89871
G01 X-28.87019 Y3.87173
G01 X-28.68317 Y3.81834
G01 X-28.64974 Y3.80968
G01 X-28.61553 Y3.80488
G01 X-28.42231 Y3.78265
G01 X-28.34233 Y3.77872
G01 X-28.27352 Y3.77872
G01 X-28.19353 Y3.78265
G01 X-28.00032 Y3.80488
G01 X-27.96610 Y3.80968
G01 X-27.93268 Y3.81834
G01 X-27.74563 Y3.87173
G01 X-27.67027 Y3.89871
G01 X-27.60664 Y3.92505
G01 X-27.53428 Y3.95929
G01 X-27.36425 Y4.05377
G01 X-27.33451 Y4.07127
G01 X-27.30692 Y4.09208
G01 X-27.15457 Y4.21301
G01 X-27.09526 Y4.26675
G01 X-27.04657 Y4.31544
G01 X-26.99280 Y4.37478
G01 X-26.91655 Y4.47084
G01 X-26.86908 Y4.52482
G01 X-26.84764 Y4.54681
G01 X-26.81972 Y4.57709
G01 X-26.80903 Y4.58938
G01 X-26.60329 Y4.76071
G01 X-26.59298 Y4.76708
G01 X-26.57345 Y4.77963
G01 X-26.54314 Y4.78044
G01 X-26.54261 Y4.78011
G01 X-26.54081 Y4.77902
G01 X-26.52201 Y4.76754
G01 X-26.31721 Y4.59998
G01 X-26.29656 Y4.57686
G01 X-26.27484 Y4.55362
G01 X-26.24678 Y4.52482
G01 X-26.19930 Y4.47084
G01 X-26.12305 Y4.37478
G01 X-26.06928 Y4.31544
G01 X-26.02059 Y4.26675
G01 X-25.96128 Y4.21301
G01 X-25.80893 Y4.09208
G01 X-25.78135 Y4.07127
G01 X-25.75160 Y4.05377
G01 X-25.58160 Y3.95929
G01 X-25.50921 Y3.92507
G01 X-25.44558 Y3.89871
G01 X-25.37020 Y3.87173
G01 X-25.18318 Y3.81834
G01 X-25.14975 Y3.80968
G01 X-25.11554 Y3.80488
G01 X-24.92232 Y3.78265
G01 X-24.84233 Y3.77872
G01 X-24.77353 Y3.77872
G01 X-24.69354 Y3.78265
G01 X-24.50032 Y3.80488
G01 X-24.46611 Y3.80968
G01 X-24.43268 Y3.81834
G01 X-24.24564 Y3.87173
G01 X-24.17028 Y3.89871
G01 X-24.10665 Y3.92505
G01 X-24.03426 Y3.95929
G01 X-23.86426 Y4.05377
G01 X-23.83451 Y4.07127
G01 X-23.80695 Y4.09208
G01 X-23.65458 Y4.21298
G01 X-23.59527 Y4.26675
G01 X-23.54655 Y4.31547
G01 X-23.49278 Y4.37478
G01 X-23.41651 Y4.47089
G01 X-23.36906 Y4.52482
G01 X-23.34770 Y4.54676
G01 X-23.31976 Y4.57706
G01 X-23.30909 Y4.58931
G01 X-23.10330 Y4.76068
G01 X-23.09301 Y4.76706
G01 X-23.07528 Y4.77844
G01 X-23.07526 Y4.77846
G01 X-23.07343 Y4.77966
G01 X-23.04315 Y4.78044
G01 X-23.04081 Y4.77899
G01 X-23.02202 Y4.76754
G01 X-22.81722 Y4.59998
G01 X-22.79657 Y4.57686
G01 X-22.77485 Y4.55362
G01 X-22.74678 Y4.52482
G01 X-22.69931 Y4.47084
G01 X-22.62306 Y4.37478
G01 X-22.56926 Y4.31544
G01 X-22.52057 Y4.26675
G01 X-22.46126 Y4.21298
G01 X-22.30889 Y4.09208
G01 X-22.28133 Y4.07127
G01 X-22.25159 Y4.05377
G01 X-22.08158 Y3.95931
G01 X-22.00919 Y3.92505
G01 X-21.94559 Y3.89871
G01 X-21.87020 Y3.87173
G01 X-21.68318 Y3.81834
G01 X-21.64973 Y3.80965
G01 X-21.61554 Y3.80488
G01 X-21.42233 Y3.78265
G01 X-21.34234 Y3.77872
G01 X-21.27353 Y3.77872
G01 X-21.19352 Y3.78265
G01 X-21.00031 Y3.80488
G01 X-20.96612 Y3.80965
G01 X-20.93266 Y3.81834
G01 X-20.74562 Y3.87176
G01 X-20.67026 Y3.89871
G01 X-20.60666 Y3.92505
G01 X-20.53427 Y3.95929
G01 X-20.36426 Y4.05377
G01 X-20.33452 Y4.07127
G01 X-20.30696 Y4.09208
G01 X-20.15459 Y4.21298
G01 X-20.09528 Y4.26675
G01 X-20.04659 Y4.31544
G01 X-19.99279 Y4.37478
G01 X-19.91654 Y4.47084
G01 X-19.86907 Y4.52482
G01 X-19.84768 Y4.54674
G01 X-19.81974 Y4.57709
G01 X-19.80910 Y4.58928
G01 X-19.60331 Y4.76068
G01 X-19.59297 Y4.76708
G01 X-19.57529 Y4.77844
G01 X-19.57526 Y4.77846
G01 X-19.57343 Y4.77966
G01 X-19.54316 Y4.78044
G01 X-19.54082 Y4.77899
G01 X-19.52200 Y4.76751
G01 X-19.31722 Y4.59998
G01 X-19.29652 Y4.57684
G01 X-19.27486 Y4.55362
G01 X-19.24679 Y4.52482
G01 X-19.19934 Y4.47089
G01 X-19.12307 Y4.37478
G01 X-19.06930 Y4.31547
G01 X-19.02058 Y4.26675
G01 X-18.96127 Y4.21298
G01 X-18.80889 Y4.09208
G01 X-18.78134 Y4.07127
G01 X-18.75159 Y4.05377
G01 X-18.58162 Y3.95931
G01 X-18.50920 Y3.92505
G01 X-18.44557 Y3.89871
G01 X-18.37019 Y3.87173
G01 X-18.18317 Y3.81834
G01 X-18.14974 Y3.80968
G01 X-18.11553 Y3.80488
G01 X-17.92231 Y3.78265
G01 X-17.84232 Y3.77872
G01 X-17.77349 Y3.77872
G01 X-17.69350 Y3.78265
G01 X-17.50031 Y3.80488
G01 X-17.46610 Y3.80968
G01 X-17.43267 Y3.81834
G01 X-17.24563 Y3.87173
G01 X-17.17026 Y3.89871
G01 X-17.10664 Y3.92505
G01 X-17.03427 Y3.95929
G01 X-16.86425 Y4.05377
G01 X-16.83448 Y4.07127
G01 X-16.80692 Y4.09208
G01 X-16.65457 Y4.21301
G01 X-16.59526 Y4.26675
G01 X-16.54654 Y4.31544
G01 X-16.49280 Y4.37478
G01 X-16.41654 Y4.47082
G01 X-16.36907 Y4.52482
G01 X-16.34769 Y4.54674
G01 X-16.31975 Y4.57709
G01 X-16.30910 Y4.58928
G01 X-16.10331 Y4.76068
G01 X-16.09295 Y4.76708
G01 X-16.07527 Y4.77846
G01 X-16.07525 Y4.77846
G01 X-16.07342 Y4.77966
G01 X-16.04314 Y4.78044
G01 X-16.04263 Y4.78011
G01 X-16.02201 Y4.76754
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.07525 Y4.77846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.07525 Y4.77846
G01 X-16.05792 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-12.55790 Y6.93584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-12.55790 Y6.93584
G01 X-12.53352 Y6.99487
G01 X-12.40413 Y7.23690
G01 X-12.35077 Y7.31676
G01 X-12.17665 Y7.52893
G01 X-12.10873 Y7.59685
G01 X-11.89659 Y7.77094
G01 X-11.81673 Y7.82430
G01 X-11.66057 Y7.90777
G01 X-11.71188 Y7.97030
G01 X-11.76525 Y8.05018
G01 X-11.83919 Y8.18849
G01 X-11.87594 Y8.27724
G01 X-11.92146 Y8.42730
G01 X-11.94020 Y8.52151
G01 X-11.95557 Y8.67759
G01 X-11.95557 Y8.77365
G01 X-11.94020 Y8.92971
G01 X-11.92146 Y9.02392
G01 X-11.87594 Y9.17401
G01 X-11.83919 Y9.26276
G01 X-11.76525 Y9.40106
G01 X-11.71188 Y9.48092
G01 X-11.61239 Y9.60215
G01 X-11.54447 Y9.67007
G01 X-11.42324 Y9.76956
G01 X-11.34338 Y9.82293
G01 X-11.20507 Y9.89687
G01 X-11.11633 Y9.93362
G01 X-10.96624 Y9.97914
G01 X-10.87203 Y9.99788
G01 X-10.71597 Y10.01325
G01 X-10.61991 Y10.01325
G01 X-10.46383 Y9.99788
G01 X-10.36962 Y9.97914
G01 X-10.21955 Y9.93362
G01 X-10.13081 Y9.89687
G01 X-9.99250 Y9.82293
G01 X-9.91262 Y9.76956
G01 X-9.79139 Y9.67007
G01 X-9.72347 Y9.60215
G01 X-9.62398 Y9.48092
G01 X-9.57061 Y9.40106
G01 X-9.49670 Y9.26276
G01 X-9.45994 Y9.17401
G01 X-9.41440 Y9.02392
G01 X-9.39568 Y8.92971
G01 X-9.38029 Y8.77365
G01 X-9.38029 Y8.67759
G01 X-9.39568 Y8.52151
G01 X-9.41440 Y8.42730
G01 X-9.45994 Y8.27724
G01 X-9.49670 Y8.18849
G01 X-9.57061 Y8.05018
G01 X-9.62398 Y7.97030
G01 X-9.72347 Y7.84907
G01 X-9.76863 Y7.80391
G01 X-9.71928 Y7.77094
G01 X-9.50714 Y7.59685
G01 X-9.43922 Y7.52893
G01 X-9.30292 Y7.36284
G01 X-9.26510 Y7.31676
G01 X-9.21173 Y7.23690
G01 X-9.08237 Y6.99487
G01 X-9.05794 Y6.93586
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.05794 Y4.82032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.05794 Y4.82032
G01 X-9.04082 Y4.77899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-9.07526 Y4.77846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-9.07526 Y4.77846
G01 X-9.05794 Y4.82032
G01 X-9.05794 Y6.93586
G01 X-9.03350 Y6.99487
G01 X-8.90414 Y7.23690
G01 X-8.85077 Y7.31676
G01 X-8.67666 Y7.52893
G01 X-8.60874 Y7.59685
G01 X-8.39660 Y7.77094
G01 X-8.31671 Y7.82430
G01 X-8.12164 Y7.92857
G01 X-8.15588 Y7.97030
G01 X-8.20925 Y8.05018
G01 X-8.28319 Y8.18849
G01 X-8.31994 Y8.27724
G01 X-8.36546 Y8.42730
G01 X-8.38420 Y8.52151
G01 X-8.39957 Y8.67759
G01 X-8.39957 Y8.77365
G01 X-8.38420 Y8.92971
G01 X-8.36546 Y9.02392
G01 X-8.31994 Y9.17401
G01 X-8.28319 Y9.26276
G01 X-8.20925 Y9.40106
G01 X-8.15588 Y9.48092
G01 X-8.05639 Y9.60215
G01 X-7.98847 Y9.67007
G01 X-7.86724 Y9.76956
G01 X-7.78738 Y9.82293
G01 X-7.64907 Y9.89687
G01 X-7.56033 Y9.93362
G01 X-7.41024 Y9.97914
G01 X-7.31603 Y9.99788
G01 X-7.15997 Y10.01325
G01 X-7.14671 Y10.01325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-7.09970 Y10.55264 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-7.09970 Y10.55264
G01 X-21.36749 Y10.55264
G01 X-21.52896 Y10.63578
G01 X-21.59012 Y10.65508
G01 X-21.76022 Y10.68825
G01 X-21.78958 Y10.69044
G01 X-21.84171 Y10.69237
G01 X-23.19365 Y10.69237
G01 X-23.22809 Y10.69323
G01 X-23.26233 Y10.69491
G01 X-23.29636 Y10.69996
G01 X-23.36380 Y10.71337
G01 X-23.39713 Y10.72173
G01 X-23.42946 Y10.73329
G01 X-23.49306 Y10.75963
G01 X-23.52407 Y10.77431
G01 X-23.54343 Y10.78589
G01 X-23.55356 Y10.79196
G01 X-23.61084 Y10.83024
G01 X-23.63840 Y10.85069
G01 X-23.66388 Y10.87378
G01 X-23.68877 Y10.89750
G01 X-23.76195 Y10.97065
G01 X-24.36390 Y11.57261
G01 X-24.43705 Y11.64578
G01 X-24.46078 Y11.67068
G01 X-24.48386 Y11.69615
G01 X-24.50431 Y11.72371
G01 X-24.54259 Y11.78099
G01 X-24.56024 Y11.81045
G01 X-24.57492 Y11.84149
G01 X-24.60126 Y11.90509
G01 X-24.62428 Y11.96943
G01 X-24.62438 Y11.96976
G01 X-24.64828 Y12.03684
G01 X-24.66525 Y12.08028
G01 X-24.67500 Y12.10316
G01 X-24.68963 Y12.13994
G01 X-24.68999 Y12.14091
G01 X-24.78191 Y12.29958
G01 X-24.79984 Y12.33052
G01 X-24.87769 Y12.35808
G01 X-24.93718 Y12.37235
G01 X-25.03004 Y12.38541
G01 X-25.05191 Y12.38426
G01 X-25.05191 Y13.17301
G01 X-25.04965 Y13.17847
G01 X-25.02974 Y13.24413
G01 X-25.01099 Y13.33834
G01 X-25.00426 Y13.40664
G01 X-25.00428 Y13.50268
G01 X-25.01099 Y13.57098
G01 X-25.02974 Y13.66518
G01 X-25.04967 Y13.73084
G01 X-25.05191 Y13.73628
G01 X-25.05194 Y14.04215
G01 X-25.05430 Y14.09015
G01 X-25.05552 Y14.10255
G01 X-25.05577 Y14.10278
G01 X-25.07220 Y14.11817
G01 X-25.08737 Y14.13282
G01 X-25.11442 Y14.15810
G01 X-25.15069 Y14.19091
G01 X-25.17546 Y14.21413
G01 X-25.18412 Y14.22259
G01 X-25.20804 Y14.24499
G01 X-25.23535 Y14.26958
G01 X-25.25798 Y14.29084
G01 X-25.26342 Y14.29615
G01 X-25.28562 Y14.31697
G01 X-25.30858 Y14.33760
G01 X-25.33017 Y14.35789
G01 X-25.33471 Y14.36234
G01 X-25.35620 Y14.38251
G01 X-25.37779 Y14.40189
G01 X-25.39928 Y14.42205
G01 X-25.40352 Y14.42622
G01 X-25.42514 Y14.44651
G01 X-25.44802 Y14.46709
G01 X-25.47025 Y14.48792
G01 X-25.47606 Y14.49363
G01 X-25.49870 Y14.51487
G01 X-25.52580 Y14.53928
G01 X-25.54972 Y14.56168
G01 X-25.55155 Y14.56346
G01 X-25.55282 Y14.57181
G01 X-25.55719 Y14.60123
G01 X-25.56456 Y14.67570
G01 X-25.56601 Y14.70511
G01 X-25.56692 Y14.74212
G01 X-25.56692 Y15.06546
G01 X-25.57060 Y15.08794
G01 X-25.58076 Y15.15655
G01 X-25.58770 Y15.22660
G01 X-25.59108 Y15.29520
G01 X-25.59191 Y15.32962
G01 X-25.59191 Y17.97739
G01 X-25.64558 Y18.09088
G01 X-25.66875 Y18.14663
G01 X-25.72486 Y18.30345
G01 X-25.73743 Y18.34480
G01 X-25.75343 Y18.40861
G01 X-25.75844 Y18.42669
G01 X-25.77873 Y18.49367
G01 X-25.78059 Y18.49957
G01 X-25.78892 Y18.52537
G01 X-25.79069 Y18.53104
G01 X-25.80888 Y18.59101
G01 X-25.81998 Y18.62202
G01 X-25.82272 Y18.62862
G01 X-25.83075 Y18.68275
G01 X-25.83385 Y18.71407
G01 X-25.84155 Y18.87091
G01 X-25.84155 Y18.90038
G01 X-25.83385 Y19.05717
G01 X-25.83075 Y19.08849
G01 X-25.80748 Y19.24534
G01 X-25.80014 Y19.28217
G01 X-25.76087 Y19.43899
G01 X-25.74668 Y19.48565
G01 X-25.69057 Y19.64249
G01 X-25.66499 Y19.70401
G01 X-25.61691 Y19.80569
G01 X-25.61691 Y19.82560
G01 X-25.60764 Y20.03413
G01 X-25.61373 Y20.09535
G01 X-25.61691 Y20.12225
G01 X-25.61691 Y20.14127
G01 X-25.66499 Y20.24295
G01 X-25.69057 Y20.30447
G01 X-25.74668 Y20.46131
G01 X-25.76087 Y20.50797
G01 X-25.80014 Y20.66479
G01 X-25.80748 Y20.70162
G01 X-25.83075 Y20.85846
G01 X-25.83385 Y20.88978
G01 X-25.84155 Y21.04658
G01 X-25.84155 Y21.07604
G01 X-25.83385 Y21.23289
G01 X-25.83075 Y21.26420
G01 X-25.80748 Y21.42102
G01 X-25.80014 Y21.45785
G01 X-25.76087 Y21.61467
G01 X-25.74668 Y21.66133
G01 X-25.69057 Y21.81818
G01 X-25.66842 Y21.87238
G01 X-25.66303 Y21.87731
G01 X-25.54668 Y21.98277
G01 X-25.49572 Y22.02455
G01 X-25.36839 Y22.11902
G01 X-25.30710 Y22.15994
G01 X-25.16842 Y22.24304
G01 X-25.09115 Y22.28427
G01 X-24.99166 Y22.33131
G01 X-24.79219 Y22.33131
G01 X-24.69270 Y22.28427
G01 X-24.61541 Y22.24302
G01 X-24.47675 Y22.15991
G01 X-24.41950 Y22.12199
G01 X-24.41546 Y22.11902
G01 X-24.37647 Y22.09245
G01 X-24.35232 Y22.07708
G01 X-24.30820 Y22.05125
G01 X-24.28153 Y22.03690
G01 X-24.26177 Y22.02585
G01 X-24.22458 Y21.99811
G01 X-24.11224 Y21.90832
G01 X-24.10274 Y21.89933
G01 X-24.05501 Y21.84960
G01 X-23.98404 Y21.76796
G01 X-23.95519 Y21.72864
G01 X-23.91727 Y21.67124
G01 X-23.88026 Y21.60878
G01 X-23.87884 Y21.60583
G01 X-23.84340 Y21.53289
G01 X-23.81638 Y21.46951
G01 X-23.80360 Y21.43497
G01 X-23.77145 Y21.31927
G01 X-23.75623 Y21.25196
G01 X-23.75605 Y21.25089
G01 X-23.74198 Y21.09578
G01 X-23.73972 Y21.06133
G01 X-23.74198 Y21.02687
G01 X-23.75605 Y20.87175
G01 X-23.75623 Y20.87068
G01 X-23.77142 Y20.80340
G01 X-23.77523 Y20.78968
G01 X-23.80360 Y20.68773
G01 X-23.81638 Y20.65313
G01 X-23.84340 Y20.58976
G01 X-23.88026 Y20.51384
G01 X-23.91727 Y20.45140
G01 X-23.95519 Y20.39400
G01 X-23.98404 Y20.35468
G01 X-24.05044 Y20.27830
G01 X-24.05499 Y20.27302
G01 X-24.10010 Y20.22009
G01 X-24.12275 Y20.19215
G01 X-24.16329 Y20.13957
G01 X-24.17619 Y19.91282
G01 X-24.17010 Y19.85163
G01 X-24.16431 Y19.80690
G01 X-24.10060 Y19.72626
G01 X-24.09202 Y19.71681
G01 X-24.07683 Y19.69956
G01 X-24.05499 Y19.67394
G01 X-24.05044 Y19.66865
G01 X-23.98404 Y19.59227
G01 X-23.95519 Y19.55296
G01 X-23.91727 Y19.49555
G01 X-23.88026 Y19.43312
G01 X-23.84340 Y19.35720
G01 X-23.81638 Y19.29380
G01 X-23.80358 Y19.25918
G01 X-23.77142 Y19.14356
G01 X-23.75623 Y19.07625
G01 X-23.75605 Y19.07518
G01 X-23.74198 Y18.92009
G01 X-23.73972 Y18.88562
G01 X-23.74198 Y18.85118
G01 X-23.75605 Y18.69606
G01 X-23.75623 Y18.69499
G01 X-23.77142 Y18.62768
G01 X-23.80360 Y18.51199
G01 X-23.81638 Y18.47744
G01 X-23.84338 Y18.41410
G01 X-23.88026 Y18.33815
G01 X-23.91724 Y18.27572
G01 X-23.95521 Y18.21826
G01 X-23.98397 Y18.17907
G01 X-24.05504 Y18.09733
G01 X-24.07216 Y18.07833
G01 X-24.10195 Y18.04663
G01 X-24.14813 Y17.99238
G01 X-24.16829 Y17.96624
G01 X-24.17462 Y17.93724
G01 X-24.19105 Y17.80432
G01 X-24.19138 Y17.79284
G01 X-24.19166 Y17.77264
G01 X-24.19166 Y15.32962
G01 X-24.19253 Y15.29518
G01 X-24.19420 Y15.26089
G01 X-24.19926 Y15.22690
G01 X-24.21267 Y15.15947
G01 X-24.22669 Y15.10343
G01 X-24.22948 Y15.09287
G01 X-24.23563 Y15.06879
G01 X-24.23726 Y15.01367
G01 X-24.23726 Y15.01232
G01 X-24.23720 Y15.00907
G01 X-24.23667 Y14.95236
G01 X-24.20352 Y14.74212
G01 X-24.19692 Y14.72045
G01 X-24.19174 Y14.70288
G01 X-24.18318 Y14.67250
G01 X-24.17901 Y14.65723
G01 X-24.16959 Y14.62147
G01 X-24.16334 Y14.61908
G01 X-24.13271 Y14.60791
G01 X-24.09192 Y14.59386
G01 X-23.95468 Y14.55970
G01 X-23.89532 Y14.55060
G01 X-23.79194 Y14.54237
G01 X-23.78793 Y14.54237
G01 X-23.75765 Y14.54154
G01 X-23.73093 Y14.54024
G01 X-23.72829 Y14.53978
G01 X-23.66093 Y14.52472
G01 X-23.63258 Y14.51690
G01 X-23.61894 Y14.51299
G01 X-23.56924 Y14.48980
G01 X-23.55753 Y14.48378
G01 X-23.54300 Y14.47649
G01 X-23.49344 Y14.45238
G01 X-23.48636 Y14.43783
G01 X-23.47244 Y14.40844
G01 X-23.44605 Y14.34489
G01 X-23.43553 Y14.31548
G01 X-23.41823 Y14.25861
G01 X-23.41087 Y14.22922
G01 X-23.40030 Y14.17626
G01 X-23.39596 Y14.14687
G01 X-23.39098 Y14.09650
G01 X-23.38953 Y14.06711
G01 X-23.38892 Y14.04212
G01 X-23.38892 Y13.95462
G01 X-23.38829 Y13.92975
G01 X-23.38493 Y13.86115
G01 X-23.37990 Y13.81032
G01 X-23.36972 Y13.74169
G01 X-23.36205 Y13.70054
G01 X-23.35656 Y13.68853
G01 X-23.34869 Y13.67044
G01 X-23.32987 Y13.62500
G01 X-23.32199 Y13.60684
G01 X-23.30614 Y13.57202
G01 X-23.29771 Y13.55259
G01 X-23.27841 Y13.50600
G01 X-23.26990 Y13.48637
G01 X-23.26502 Y13.47552
G01 X-23.25595 Y13.45462
G01 X-23.10188 Y13.08266
G01 X-23.07594 Y13.05673
G01 X-23.07594 Y12.86712
G01 X-23.07358 Y12.81909
G01 X-23.07068 Y12.78982
G01 X-23.05196 Y12.69562
G01 X-23.04343 Y12.66747
G01 X-23.00665 Y12.57873
G01 X-22.99281 Y12.55279
G01 X-22.93944 Y12.47293
G01 X-22.92077 Y12.45020
G01 X-22.85285 Y12.38228
G01 X-22.83012 Y12.36361
G01 X-22.75026 Y12.31025
G01 X-22.72433 Y12.29638
G01 X-22.63558 Y12.25962
G01 X-22.60744 Y12.25109
G01 X-22.51458 Y12.23262
G01 X-22.51343 Y12.23252
G01 X-22.48402 Y12.23108
G01 X-22.43594 Y12.22988
G01 X-22.13594 Y12.22988
G01 X-22.08783 Y12.23108
G01 X-22.05842 Y12.23252
G01 X-22.05720 Y12.23265
G01 X-21.96444 Y12.25109
G01 X-21.93630 Y12.25962
G01 X-21.84755 Y12.29638
G01 X-21.82161 Y12.31025
G01 X-21.74176 Y12.36361
G01 X-21.71902 Y12.38228
G01 X-21.65110 Y12.45020
G01 X-21.63243 Y12.47293
G01 X-21.57907 Y12.55279
G01 X-21.56523 Y12.57873
G01 X-21.52845 Y12.66747
G01 X-21.51991 Y12.69562
G01 X-21.50117 Y12.78982
G01 X-21.49830 Y12.81909
G01 X-21.49594 Y12.86712
G01 X-21.49594 Y13.17293
G01 X-21.49365 Y13.17844
G01 X-21.47374 Y13.24410
G01 X-21.45499 Y13.33831
G01 X-21.44828 Y13.40661
G01 X-21.44828 Y13.50265
G01 X-21.45499 Y13.57095
G01 X-21.47374 Y13.66516
G01 X-21.49365 Y13.73082
G01 X-21.49594 Y13.73633
G01 X-21.49594 Y14.04212
G01 X-21.49830 Y14.09015
G01 X-21.49952 Y14.10255
G01 X-21.49977 Y14.10278
G01 X-21.51620 Y14.11817
G01 X-21.53137 Y14.13282
G01 X-21.55842 Y14.15810
G01 X-21.59469 Y14.19091
G01 X-21.61946 Y14.21413
G01 X-21.62812 Y14.22259
G01 X-21.65204 Y14.24499
G01 X-21.67935 Y14.26958
G01 X-21.70198 Y14.29084
G01 X-21.70742 Y14.29615
G01 X-21.72962 Y14.31697
G01 X-21.75258 Y14.33760
G01 X-21.77417 Y14.35789
G01 X-21.77871 Y14.36234
G01 X-21.80020 Y14.38251
G01 X-21.82179 Y14.40189
G01 X-21.84328 Y14.42205
G01 X-21.84752 Y14.42622
G01 X-21.86914 Y14.44651
G01 X-21.89202 Y14.46709
G01 X-21.91425 Y14.48792
G01 X-21.92006 Y14.49363
G01 X-21.94270 Y14.51487
G01 X-21.96980 Y14.53928
G01 X-21.99372 Y14.56168
G01 X-22.00239 Y14.57014
G01 X-22.02532 Y14.59170
G01 X-22.02563 Y14.59381
G01 X-22.03348 Y14.67323
G01 X-22.03495 Y14.70265
G01 X-22.03591 Y14.74212
G01 X-22.03591 Y15.06107
G01 X-22.03861 Y15.07758
G01 X-22.03833 Y15.08073
G01 X-22.03510 Y15.15342
G01 X-22.03515 Y15.20407
G01 X-22.03485 Y15.22629
G01 X-22.03459 Y15.23536
G01 X-22.03513 Y15.29114
G01 X-22.03533 Y15.29518
G01 X-22.03617 Y15.32962
G01 X-22.03617 Y17.77264
G01 X-22.04496 Y17.88369
G01 X-22.05466 Y17.94488
G01 X-22.05847 Y17.96673
G01 X-22.06675 Y17.97790
G01 X-22.10899 Y18.06726
G01 X-22.13454 Y18.12875
G01 X-22.19065 Y18.28557
G01 X-22.20487 Y18.33228
G01 X-22.24414 Y18.48913
G01 X-22.25148 Y18.52593
G01 X-22.27475 Y18.68275
G01 X-22.27785 Y18.71407
G01 X-22.28555 Y18.87091
G01 X-22.28555 Y18.90038
G01 X-22.27785 Y19.05717
G01 X-22.27475 Y19.08849
G01 X-22.25148 Y19.24534
G01 X-22.24414 Y19.28217
G01 X-22.20487 Y19.43899
G01 X-22.19068 Y19.48565
G01 X-22.13457 Y19.64249
G01 X-22.10899 Y19.70401
G01 X-22.06091 Y19.80569
G01 X-22.06091 Y19.82560
G01 X-22.05164 Y20.03413
G01 X-22.05773 Y20.09535
G01 X-22.06091 Y20.12225
G01 X-22.06091 Y20.14127
G01 X-22.10899 Y20.24295
G01 X-22.13457 Y20.30447
G01 X-22.19068 Y20.46131
G01 X-22.20487 Y20.50797
G01 X-22.24414 Y20.66479
G01 X-22.25148 Y20.70162
G01 X-22.27475 Y20.85846
G01 X-22.27785 Y20.88978
G01 X-22.28555 Y21.04658
G01 X-22.28555 Y21.07604
G01 X-22.27785 Y21.23289
G01 X-22.27475 Y21.26420
G01 X-22.25148 Y21.42102
G01 X-22.24414 Y21.45785
G01 X-22.20487 Y21.61467
G01 X-22.19068 Y21.66133
G01 X-22.13457 Y21.81818
G01 X-22.11242 Y21.87238
G01 X-22.10703 Y21.87731
G01 X-21.99068 Y21.98277
G01 X-21.93972 Y22.02455
G01 X-21.81239 Y22.11902
G01 X-21.75110 Y22.15994
G01 X-21.61242 Y22.24304
G01 X-21.53515 Y22.28427
G01 X-21.43566 Y22.33131
G01 X-21.23619 Y22.33131
G01 X-21.13670 Y22.28427
G01 X-21.05941 Y22.24302
G01 X-20.92075 Y22.15991
G01 X-20.86350 Y22.12199
G01 X-20.85946 Y22.11902
G01 X-20.82047 Y22.09245
G01 X-20.79632 Y22.07708
G01 X-20.75220 Y22.05125
G01 X-20.72553 Y22.03690
G01 X-20.70577 Y22.02585
G01 X-20.66858 Y21.99811
G01 X-20.55624 Y21.90832
G01 X-20.54674 Y21.89933
G01 X-20.49901 Y21.84960
G01 X-20.42804 Y21.76796
G01 X-20.39919 Y21.72864
G01 X-20.36127 Y21.67124
G01 X-20.32426 Y21.60878
G01 X-20.32284 Y21.60583
G01 X-20.28740 Y21.53289
G01 X-20.26038 Y21.46951
G01 X-20.24760 Y21.43497
G01 X-20.21545 Y21.31927
G01 X-20.20023 Y21.25196
G01 X-20.20005 Y21.25089
G01 X-20.18598 Y21.09578
G01 X-20.18372 Y21.06133
G01 X-20.18598 Y21.02687
G01 X-20.20005 Y20.87175
G01 X-20.20023 Y20.87068
G01 X-20.21542 Y20.80340
G01 X-20.21923 Y20.78968
G01 X-20.24760 Y20.68773
G01 X-20.26038 Y20.65313
G01 X-20.28740 Y20.58976
G01 X-20.32426 Y20.51384
G01 X-20.36127 Y20.45140
G01 X-20.39919 Y20.39400
G01 X-20.42804 Y20.35468
G01 X-20.49444 Y20.27830
G01 X-20.49899 Y20.27302
G01 X-20.54410 Y20.22009
G01 X-20.56675 Y20.19215
G01 X-20.60729 Y20.13957
G01 X-20.62019 Y19.91282
G01 X-20.61410 Y19.85163
G01 X-20.60831 Y19.80690
G01 X-20.54460 Y19.72626
G01 X-20.53602 Y19.71681
G01 X-20.52083 Y19.69956
G01 X-20.49899 Y19.67394
G01 X-20.49444 Y19.66865
G01 X-20.42804 Y19.59227
G01 X-20.39919 Y19.55296
G01 X-20.36127 Y19.49555
G01 X-20.32426 Y19.43312
G01 X-20.28740 Y19.35720
G01 X-20.26038 Y19.29380
G01 X-20.24758 Y19.25918
G01 X-20.21542 Y19.14356
G01 X-20.20023 Y19.07625
G01 X-20.20005 Y19.07518
G01 X-20.18598 Y18.92009
G01 X-20.18372 Y18.88562
G01 X-20.18598 Y18.85118
G01 X-20.20005 Y18.69606
G01 X-20.20023 Y18.69499
G01 X-20.21542 Y18.62768
G01 X-20.24760 Y18.51199
G01 X-20.26038 Y18.47744
G01 X-20.28738 Y18.41410
G01 X-20.32426 Y18.33815
G01 X-20.36124 Y18.27572
G01 X-20.39921 Y18.21826
G01 X-20.42797 Y18.17907
G01 X-20.49904 Y18.09733
G01 X-20.51616 Y18.07833
G01 X-20.54595 Y18.04663
G01 X-20.59213 Y17.99238
G01 X-20.61229 Y17.96624
G01 X-20.61862 Y17.93724
G01 X-20.63505 Y17.80432
G01 X-20.63538 Y17.79284
G01 X-20.63569 Y17.77264
G01 X-20.63569 Y15.32962
G01 X-20.63653 Y15.29518
G01 X-20.63820 Y15.26089
G01 X-20.64326 Y15.22690
G01 X-20.65667 Y15.15947
G01 X-20.67069 Y15.10343
G01 X-20.67348 Y15.09287
G01 X-20.67963 Y15.06879
G01 X-20.68126 Y15.01367
G01 X-20.68126 Y15.01232
G01 X-20.68120 Y15.00907
G01 X-20.68067 Y14.95236
G01 X-20.64752 Y14.74212
G01 X-20.64092 Y14.72045
G01 X-20.63574 Y14.70288
G01 X-20.62718 Y14.67250
G01 X-20.62301 Y14.65723
G01 X-20.61359 Y14.62147
G01 X-20.60734 Y14.61908
G01 X-20.57671 Y14.60791
G01 X-20.53594 Y14.59386
G01 X-20.39868 Y14.55970
G01 X-20.33932 Y14.55060
G01 X-20.23594 Y14.54237
G01 X-20.23193 Y14.54237
G01 X-20.20165 Y14.54154
G01 X-20.17493 Y14.54024
G01 X-20.17229 Y14.53978
G01 X-20.10493 Y14.52472
G01 X-20.07658 Y14.51690
G01 X-20.06294 Y14.51299
G01 X-20.01324 Y14.48980
G01 X-20.00153 Y14.48378
G01 X-19.98700 Y14.47649
G01 X-19.93744 Y14.45238
G01 X-19.93036 Y14.43783
G01 X-19.91644 Y14.40844
G01 X-19.89005 Y14.34489
G01 X-19.87953 Y14.31548
G01 X-19.86223 Y14.25861
G01 X-19.85487 Y14.22922
G01 X-19.84430 Y14.17626
G01 X-19.83996 Y14.14687
G01 X-19.83498 Y14.09650
G01 X-19.83353 Y14.06711
G01 X-19.83290 Y14.04212
G01 X-19.83290 Y13.95462
G01 X-19.83229 Y13.92975
G01 X-19.82893 Y13.86115
G01 X-19.82390 Y13.81032
G01 X-19.81372 Y13.74169
G01 X-19.80605 Y13.70054
G01 X-19.80056 Y13.68853
G01 X-19.79269 Y13.67044
G01 X-19.77387 Y13.62500
G01 X-19.76599 Y13.60684
G01 X-19.75014 Y13.57202
G01 X-19.74171 Y13.55259
G01 X-19.72241 Y13.50600
G01 X-19.71390 Y13.48637
G01 X-19.70902 Y13.47552
G01 X-19.69995 Y13.45464
G01 X-19.54588 Y13.08266
G01 X-19.51994 Y13.05673
G01 X-19.51994 Y12.86712
G01 X-19.51758 Y12.81909
G01 X-19.51468 Y12.78982
G01 X-19.49596 Y12.69562
G01 X-19.48743 Y12.66747
G01 X-19.45065 Y12.57873
G01 X-19.43681 Y12.55279
G01 X-19.38344 Y12.47293
G01 X-19.36477 Y12.45020
G01 X-19.29685 Y12.38228
G01 X-19.27412 Y12.36361
G01 X-19.19426 Y12.31025
G01 X-19.16833 Y12.29638
G01 X-19.07958 Y12.25962
G01 X-19.05144 Y12.25109
G01 X-18.95858 Y12.23262
G01 X-18.95743 Y12.23252
G01 X-18.92802 Y12.23108
G01 X-18.87994 Y12.22988
G01 X-18.57994 Y12.22988
G01 X-18.53183 Y12.23108
G01 X-18.50242 Y12.23252
G01 X-18.50120 Y12.23265
G01 X-18.40844 Y12.25109
G01 X-18.38030 Y12.25962
G01 X-18.29155 Y12.29638
G01 X-18.26561 Y12.31025
G01 X-18.18576 Y12.36361
G01 X-18.16302 Y12.38228
G01 X-18.09510 Y12.45020
G01 X-18.07644 Y12.47293
G01 X-18.02307 Y12.55279
G01 X-18.00923 Y12.57873
G01 X-17.97245 Y12.66747
G01 X-17.96391 Y12.69562
G01 X-17.94517 Y12.78982
G01 X-17.94230 Y12.81909
G01 X-17.93994 Y12.86712
G01 X-17.93994 Y13.17293
G01 X-17.93765 Y13.17844
G01 X-17.91774 Y13.24410
G01 X-17.89899 Y13.33831
G01 X-17.89229 Y13.40661
G01 X-17.89229 Y13.50265
G01 X-17.89899 Y13.57095
G01 X-17.91774 Y13.66516
G01 X-17.93765 Y13.73082
G01 X-17.93994 Y13.73633
G01 X-17.93994 Y14.04212
G01 X-17.94230 Y14.09015
G01 X-17.94352 Y14.10255
G01 X-17.94377 Y14.10278
G01 X-17.96020 Y14.11817
G01 X-17.97537 Y14.13282
G01 X-18.00242 Y14.15810
G01 X-18.03869 Y14.19091
G01 X-18.06346 Y14.21413
G01 X-18.07212 Y14.22259
G01 X-18.09604 Y14.24499
G01 X-18.12335 Y14.26958
G01 X-18.14598 Y14.29084
G01 X-18.15142 Y14.29615
G01 X-18.17362 Y14.31697
G01 X-18.19658 Y14.33760
G01 X-18.21817 Y14.35789
G01 X-18.22271 Y14.36234
G01 X-18.24420 Y14.38251
G01 X-18.26579 Y14.40189
G01 X-18.28728 Y14.42205
G01 X-18.29152 Y14.42622
G01 X-18.31314 Y14.44651
G01 X-18.33602 Y14.46709
G01 X-18.35825 Y14.48792
G01 X-18.36406 Y14.49363
G01 X-18.38670 Y14.51487
G01 X-18.41380 Y14.53928
G01 X-18.43772 Y14.56168
G01 X-18.44639 Y14.57014
G01 X-18.46932 Y14.59170
G01 X-18.46963 Y14.59381
G01 X-18.47748 Y14.67323
G01 X-18.47895 Y14.70265
G01 X-18.47991 Y14.74212
G01 X-18.47991 Y15.06107
G01 X-18.48261 Y15.07758
G01 X-18.48233 Y15.08073
G01 X-18.47910 Y15.15342
G01 X-18.47915 Y15.20407
G01 X-18.47885 Y15.22629
G01 X-18.47859 Y15.23536
G01 X-18.47913 Y15.29114
G01 X-18.47933 Y15.29518
G01 X-18.48017 Y15.32962
G01 X-18.48017 Y17.77264
G01 X-18.48896 Y17.88369
G01 X-18.49866 Y17.94488
G01 X-18.50247 Y17.96673
G01 X-18.51075 Y17.97790
G01 X-18.55299 Y18.06726
G01 X-18.57854 Y18.12875
G01 X-18.63465 Y18.28557
G01 X-18.64887 Y18.33228
G01 X-18.68814 Y18.48913
G01 X-18.69548 Y18.52593
G01 X-18.71875 Y18.68275
G01 X-18.72185 Y18.71407
G01 X-18.72955 Y18.87091
G01 X-18.72955 Y18.90038
G01 X-18.72185 Y19.05717
G01 X-18.71875 Y19.08849
G01 X-18.69548 Y19.24534
G01 X-18.68814 Y19.28217
G01 X-18.64887 Y19.43899
G01 X-18.63468 Y19.48565
G01 X-18.57857 Y19.64249
G01 X-18.55299 Y19.70401
G01 X-18.50491 Y19.80569
G01 X-18.50491 Y19.82560
G01 X-18.49564 Y20.03413
G01 X-18.50173 Y20.09535
G01 X-18.50491 Y20.12225
G01 X-18.50491 Y20.14127
G01 X-18.55299 Y20.24295
G01 X-18.57857 Y20.30447
G01 X-18.63468 Y20.46131
G01 X-18.64887 Y20.50797
G01 X-18.68814 Y20.66479
G01 X-18.69548 Y20.70162
G01 X-18.71875 Y20.85846
G01 X-18.72185 Y20.88978
G01 X-18.72955 Y21.04658
G01 X-18.72955 Y21.07604
G01 X-18.72185 Y21.23289
G01 X-18.71875 Y21.26420
G01 X-18.69548 Y21.42102
G01 X-18.68814 Y21.45785
G01 X-18.64887 Y21.61467
G01 X-18.63468 Y21.66133
G01 X-18.57857 Y21.81818
G01 X-18.55642 Y21.87238
G01 X-18.55103 Y21.87731
G01 X-18.43468 Y21.98277
G01 X-18.38372 Y22.02455
G01 X-18.25639 Y22.11902
G01 X-18.19510 Y22.15994
G01 X-18.05642 Y22.24304
G01 X-17.97915 Y22.28427
G01 X-17.87966 Y22.33131
G01 X-17.68019 Y22.33131
G01 X-17.58070 Y22.28427
G01 X-17.50339 Y22.24302
G01 X-17.36475 Y22.15991
G01 X-17.30750 Y22.12199
G01 X-17.30346 Y22.11902
G01 X-17.26432 Y22.09235
G01 X-17.24014 Y22.07698
G01 X-17.19622 Y22.05127
G01 X-17.16953 Y22.03690
G01 X-17.14977 Y22.02587
G01 X-17.11256 Y21.99811
G01 X-17.00024 Y21.90832
G01 X-16.99071 Y21.89933
G01 X-16.94301 Y21.84960
G01 X-16.87204 Y21.76796
G01 X-16.84319 Y21.72864
G01 X-16.80527 Y21.67124
G01 X-16.76823 Y21.60878
G01 X-16.76684 Y21.60583
G01 X-16.73140 Y21.53289
G01 X-16.70438 Y21.46951
G01 X-16.69160 Y21.43497
G01 X-16.65945 Y21.31927
G01 X-16.64423 Y21.25196
G01 X-16.64403 Y21.25089
G01 X-16.62998 Y21.09578
G01 X-16.62772 Y21.06133
G01 X-16.62998 Y21.02687
G01 X-16.64403 Y20.87175
G01 X-16.64423 Y20.87068
G01 X-16.65942 Y20.80340
G01 X-16.66323 Y20.78968
G01 X-16.69160 Y20.68773
G01 X-16.70438 Y20.65313
G01 X-16.73140 Y20.58976
G01 X-16.76823 Y20.51384
G01 X-16.80527 Y20.45140
G01 X-16.84319 Y20.39400
G01 X-16.87204 Y20.35468
G01 X-16.93841 Y20.27830
G01 X-16.94299 Y20.27302
G01 X-16.98810 Y20.22009
G01 X-17.01073 Y20.19215
G01 X-17.04906 Y20.14244
G01 X-17.05129 Y20.13957
G01 X-17.06419 Y19.91267
G01 X-17.05807 Y19.85146
G01 X-17.05228 Y19.80693
G01 X-16.98860 Y19.72626
G01 X-16.98020 Y19.71704
G01 X-16.96503 Y19.69982
G01 X-16.94299 Y19.67394
G01 X-16.93841 Y19.66865
G01 X-16.87204 Y19.59227
G01 X-16.84319 Y19.55296
G01 X-16.80527 Y19.49555
G01 X-16.76823 Y19.43312
G01 X-16.73140 Y19.35720
G01 X-16.70438 Y19.29380
G01 X-16.69158 Y19.25918
G01 X-16.65942 Y19.14356
G01 X-16.64423 Y19.07625
G01 X-16.64403 Y19.07518
G01 X-16.62998 Y18.92009
G01 X-16.62772 Y18.88562
G01 X-16.62998 Y18.85118
G01 X-16.64403 Y18.69606
G01 X-16.64423 Y18.69499
G01 X-16.65942 Y18.62768
G01 X-16.69160 Y18.51199
G01 X-16.70438 Y18.47744
G01 X-16.73135 Y18.41410
G01 X-16.76823 Y18.33815
G01 X-16.80524 Y18.27572
G01 X-16.84319 Y18.21826
G01 X-16.87197 Y18.17907
G01 X-16.94301 Y18.09733
G01 X-16.96089 Y18.07755
G01 X-16.96808 Y18.06990
G01 X-16.96844 Y18.06954
G01 X-16.98995 Y18.04663
G01 X-17.03613 Y17.99238
G01 X-17.05624 Y17.96624
G01 X-17.06262 Y17.93724
G01 X-17.07900 Y17.80508
G01 X-17.07936 Y17.79360
G01 X-17.07969 Y17.77264
G01 X-17.07969 Y15.32962
G01 X-17.08053 Y15.29518
G01 X-17.08220 Y15.26089
G01 X-17.08723 Y15.22690
G01 X-17.10067 Y15.15947
G01 X-17.11482 Y15.10285
G01 X-17.11748 Y15.09287
G01 X-17.12363 Y15.06879
G01 X-17.12528 Y15.02035
G01 X-17.12528 Y15.01900
G01 X-17.12520 Y15.00907
G01 X-17.12467 Y14.95236
G01 X-17.09150 Y14.74212
G01 X-17.08490 Y14.72045
G01 X-17.07971 Y14.70288
G01 X-17.07118 Y14.67250
G01 X-17.06701 Y14.65723
G01 X-17.05759 Y14.62147
G01 X-17.05132 Y14.61908
G01 X-17.02071 Y14.60791
G01 X-16.97994 Y14.59386
G01 X-16.84263 Y14.55970
G01 X-16.78324 Y14.55060
G01 X-16.67992 Y14.54237
G01 X-16.67590 Y14.54237
G01 X-16.64565 Y14.54154
G01 X-16.61893 Y14.54024
G01 X-16.61627 Y14.53978
G01 X-16.54893 Y14.52472
G01 X-16.52056 Y14.51690
G01 X-16.50692 Y14.51299
G01 X-16.45721 Y14.48980
G01 X-16.43107 Y14.47633
G01 X-16.39404 Y14.45581
G01 X-16.37857 Y14.44662
G01 X-16.37433 Y14.43783
G01 X-16.36044 Y14.40844
G01 X-16.33405 Y14.34489
G01 X-16.32350 Y14.31548
G01 X-16.30623 Y14.25861
G01 X-16.29887 Y14.22922
G01 X-16.28830 Y14.17626
G01 X-16.28396 Y14.14687
G01 X-16.27895 Y14.09650
G01 X-16.27751 Y14.06711
G01 X-16.27692 Y14.04212
G01 X-16.27692 Y13.87613
G01 X-16.27629 Y13.85124
G01 X-16.27293 Y13.78263
G01 X-16.26790 Y13.73181
G01 X-16.26287 Y13.69785
G01 X-16.25200 Y13.66579
G01 X-16.25175 Y13.66498
G01 X-16.23410 Y13.61560
G01 X-16.22818 Y13.60130
G01 X-16.21004 Y13.55068
G01 X-16.20992 Y13.55020
G01 X-16.19059 Y13.49643
G01 X-16.18533 Y13.48365
G01 X-16.17413 Y13.45462
G01 X-16.16488 Y13.42876
G01 X-16.15274 Y13.39729
G01 X-15.98988 Y13.00415
G01 X-15.96394 Y12.97822
G01 X-15.96394 Y12.78861
G01 X-15.96155 Y12.74057
G01 X-15.95866 Y12.71131
G01 X-15.93994 Y12.61710
G01 X-15.93143 Y12.58896
G01 X-15.89465 Y12.50021
G01 X-15.88078 Y12.47428
G01 X-15.82744 Y12.39442
G01 X-15.80877 Y12.37169
G01 X-15.74085 Y12.30377
G01 X-15.71810 Y12.28513
G01 X-15.63956 Y12.23262
G01 X-15.63814 Y12.23219
G01 X-15.60872 Y12.22483
G01 X-15.51586 Y12.20631
G01 X-15.48647 Y12.20197
G01 X-15.39717 Y12.19315
G01 X-15.36775 Y12.19171
G01 X-15.32394 Y12.19064
G01 X-15.02394 Y12.19064
G01 X-14.98010 Y12.19171
G01 X-14.95069 Y12.19315
G01 X-14.86138 Y12.20197
G01 X-14.83197 Y12.20631
G01 X-14.73913 Y12.22483
G01 X-14.70972 Y12.23219
G01 X-14.70829 Y12.23262
G01 X-14.62976 Y12.28513
G01 X-14.60702 Y12.30377
G01 X-14.53910 Y12.37169
G01 X-14.52043 Y12.39442
G01 X-14.46707 Y12.47428
G01 X-14.45323 Y12.50021
G01 X-14.41645 Y12.58896
G01 X-14.40791 Y12.61710
G01 X-14.38917 Y12.71131
G01 X-14.38630 Y12.74057
G01 X-14.38394 Y12.78861
G01 X-14.38394 Y13.09442
G01 X-14.38165 Y13.09993
G01 X-14.36174 Y13.16559
G01 X-14.34299 Y13.25980
G01 X-14.33628 Y13.32810
G01 X-14.33628 Y13.42414
G01 X-14.34299 Y13.49244
G01 X-14.36174 Y13.58665
G01 X-14.38165 Y13.65231
G01 X-14.38394 Y13.65782
G01 X-14.38394 Y13.96361
G01 X-14.38630 Y14.01164
G01 X-14.38752 Y14.02406
G01 X-14.38775 Y14.02426
G01 X-14.40418 Y14.03966
G01 X-14.41901 Y14.05398
G01 X-14.44606 Y14.07928
G01 X-14.48269 Y14.11240
G01 X-14.50746 Y14.13562
G01 X-14.51612 Y14.14408
G01 X-14.54004 Y14.16648
G01 X-14.56735 Y14.19107
G01 X-14.58998 Y14.21233
G01 X-14.59562 Y14.21781
G01 X-14.61782 Y14.23867
G01 X-14.64055 Y14.25909
G01 X-14.66217 Y14.27938
G01 X-14.66656 Y14.28370
G01 X-14.68805 Y14.30387
G01 X-14.70979 Y14.32337
G01 X-14.73128 Y14.34354
G01 X-14.73552 Y14.34771
G01 X-14.75714 Y14.36800
G01 X-14.78002 Y14.38858
G01 X-14.80225 Y14.40940
G01 X-14.80806 Y14.41512
G01 X-14.83070 Y14.43635
G01 X-14.85780 Y14.46076
G01 X-14.88172 Y14.48317
G01 X-14.89039 Y14.49162
G01 X-14.91332 Y14.51319
G01 X-14.91363 Y14.51530
G01 X-14.92148 Y14.59472
G01 X-14.92295 Y14.62414
G01 X-14.92391 Y14.66361
G01 X-14.92391 Y14.98256
G01 X-14.92661 Y14.99909
G01 X-14.92633 Y15.00222
G01 X-14.92310 Y15.07491
G01 X-14.92315 Y15.12553
G01 X-14.92285 Y15.14778
G01 X-14.92259 Y15.15680
G01 X-14.92313 Y15.21263
G01 X-14.92333 Y15.21667
G01 X-14.92417 Y15.25111
G01 X-14.92417 Y17.77264
G01 X-14.93296 Y17.88369
G01 X-14.94266 Y17.94488
G01 X-14.94647 Y17.96673
G01 X-14.95475 Y17.97790
G01 X-14.99699 Y18.06726
G01 X-15.02254 Y18.12875
G01 X-15.07865 Y18.28557
G01 X-15.09287 Y18.33228
G01 X-15.13214 Y18.48913
G01 X-15.13948 Y18.52593
G01 X-15.16275 Y18.68275
G01 X-15.16585 Y18.71407
G01 X-15.17355 Y18.87091
G01 X-15.17355 Y18.90038
G01 X-15.16585 Y19.05717
G01 X-15.16275 Y19.08849
G01 X-15.13948 Y19.24534
G01 X-15.13214 Y19.28217
G01 X-15.09287 Y19.43899
G01 X-15.07868 Y19.48565
G01 X-15.02257 Y19.64249
G01 X-14.99699 Y19.70401
G01 X-14.94891 Y19.80569
G01 X-14.94891 Y19.82560
G01 X-14.93964 Y20.03413
G01 X-14.94573 Y20.09535
G01 X-14.94891 Y20.12225
G01 X-14.94891 Y20.14127
G01 X-14.99699 Y20.24295
G01 X-15.02257 Y20.30447
G01 X-15.07868 Y20.46131
G01 X-15.09287 Y20.50797
G01 X-15.13214 Y20.66479
G01 X-15.13948 Y20.70162
G01 X-15.16275 Y20.85846
G01 X-15.16585 Y20.88978
G01 X-15.17355 Y21.04658
G01 X-15.17355 Y21.07604
G01 X-15.16585 Y21.23289
G01 X-15.16275 Y21.26420
G01 X-15.13948 Y21.42102
G01 X-15.13214 Y21.45785
G01 X-15.09287 Y21.61467
G01 X-15.07868 Y21.66133
G01 X-15.02257 Y21.81818
G01 X-15.00042 Y21.87238
G01 X-14.99503 Y21.87731
G01 X-14.87868 Y21.98277
G01 X-14.82772 Y22.02455
G01 X-14.70039 Y22.11902
G01 X-14.63910 Y22.15994
G01 X-14.50042 Y22.24304
G01 X-14.42315 Y22.28427
G01 X-14.32366 Y22.33131
G01 X-14.12419 Y22.33131
G01 X-14.02470 Y22.28427
G01 X-13.94741 Y22.24302
G01 X-13.80875 Y22.15991
G01 X-13.75150 Y22.12199
G01 X-13.74746 Y22.11902
G01 X-13.70847 Y22.09245
G01 X-13.68432 Y22.07708
G01 X-13.64020 Y22.05125
G01 X-13.61353 Y22.03690
G01 X-13.59377 Y22.02585
G01 X-13.55658 Y21.99811
G01 X-13.44424 Y21.90832
G01 X-13.43474 Y21.89933
G01 X-13.38701 Y21.84960
G01 X-13.31604 Y21.76796
G01 X-13.28719 Y21.72864
G01 X-13.24927 Y21.67124
G01 X-13.21226 Y21.60878
G01 X-13.21084 Y21.60583
G01 X-13.17540 Y21.53289
G01 X-13.14838 Y21.46951
G01 X-13.13560 Y21.43497
G01 X-13.10345 Y21.31927
G01 X-13.08823 Y21.25196
G01 X-13.08805 Y21.25089
G01 X-13.07398 Y21.09578
G01 X-13.07172 Y21.06133
G01 X-13.07398 Y21.02687
G01 X-13.08805 Y20.87175
G01 X-13.08823 Y20.87068
G01 X-13.10342 Y20.80340
G01 X-13.10723 Y20.78968
G01 X-13.13560 Y20.68773
G01 X-13.14838 Y20.65313
G01 X-13.17540 Y20.58976
G01 X-13.21226 Y20.51384
G01 X-13.24927 Y20.45140
G01 X-13.28719 Y20.39400
G01 X-13.31604 Y20.35468
G01 X-13.38244 Y20.27830
G01 X-13.38699 Y20.27302
G01 X-13.43210 Y20.22009
G01 X-13.45475 Y20.19215
G01 X-13.49529 Y20.13957
G01 X-13.50819 Y19.91282
G01 X-13.50210 Y19.85163
G01 X-13.49631 Y19.80690
G01 X-13.43260 Y19.72626
G01 X-13.42402 Y19.71681
G01 X-13.40883 Y19.69956
G01 X-13.38699 Y19.67394
G01 X-13.38244 Y19.66865
G01 X-13.31604 Y19.59227
G01 X-13.28719 Y19.55296
G01 X-13.24927 Y19.49555
G01 X-13.21226 Y19.43312
G01 X-13.17540 Y19.35720
G01 X-13.14838 Y19.29380
G01 X-13.13558 Y19.25918
G01 X-13.10342 Y19.14356
G01 X-13.08823 Y19.07625
G01 X-13.08805 Y19.07518
G01 X-13.07398 Y18.92009
G01 X-13.07172 Y18.88562
G01 X-13.07398 Y18.85118
G01 X-13.08805 Y18.69606
G01 X-13.08823 Y18.69499
G01 X-13.10342 Y18.62768
G01 X-13.13560 Y18.51199
G01 X-13.14838 Y18.47744
G01 X-13.17538 Y18.41410
G01 X-13.21226 Y18.33815
G01 X-13.24924 Y18.27572
G01 X-13.28721 Y18.21826
G01 X-13.31597 Y18.17907
G01 X-13.38704 Y18.09733
G01 X-13.40416 Y18.07833
G01 X-13.43395 Y18.04663
G01 X-13.48013 Y17.99238
G01 X-13.50029 Y17.96624
G01 X-13.50662 Y17.93724
G01 X-13.52305 Y17.80432
G01 X-13.52338 Y17.79284
G01 X-13.52366 Y17.77264
G01 X-13.52366 Y15.25111
G01 X-13.52453 Y15.21667
G01 X-13.52620 Y15.18240
G01 X-13.53126 Y15.14839
G01 X-13.54467 Y15.08096
G01 X-13.55869 Y15.02492
G01 X-13.56148 Y15.01436
G01 X-13.56763 Y14.99028
G01 X-13.56926 Y14.93516
G01 X-13.56926 Y14.93381
G01 X-13.56920 Y14.93049
G01 X-13.56867 Y14.87384
G01 X-13.53552 Y14.66361
G01 X-13.52892 Y14.64194
G01 X-13.52374 Y14.62436
G01 X-13.51518 Y14.59399
G01 X-13.51101 Y14.57872
G01 X-13.50159 Y14.54296
G01 X-13.49575 Y14.54070
G01 X-13.46509 Y14.52955
G01 X-13.42392 Y14.51537
G01 X-13.28666 Y14.48121
G01 X-13.22732 Y14.47212
G01 X-13.12394 Y14.46389
G01 X-13.11993 Y14.46386
G01 X-13.08935 Y14.46302
G01 X-13.06293 Y14.46173
G01 X-13.05999 Y14.46122
G01 X-12.99293 Y14.44621
G01 X-12.96458 Y14.43839
G01 X-12.95097 Y14.43450
G01 X-12.94015 Y14.42985
G01 X-12.90063 Y14.41245
G01 X-12.87332 Y14.40112
G01 X-12.84429 Y14.38977
G01 X-12.82244 Y14.36363
G01 X-12.81861 Y14.35899
G01 X-12.79961 Y14.33582
G01 X-12.77878 Y14.30918
G01 X-12.75877 Y14.28218
G01 X-12.74071 Y14.25896
G01 X-12.73875 Y14.25655
G01 X-12.70154 Y14.20613
G01 X-12.69819 Y14.20110
G01 X-12.68478 Y14.18177
G01 X-12.67888 Y14.17357
G01 X-12.64622 Y14.12386
G01 X-12.63062 Y14.09787
G01 X-12.59478 Y14.03069
G01 X-12.58142 Y14.00247
G01 X-12.56420 Y13.96363
G01 X-12.48389 Y13.76973
G01 X-12.48394 Y13.65779
G01 X-12.48165 Y13.65231
G01 X-12.46174 Y13.58665
G01 X-12.45790 Y13.56752
G01 X-12.45044 Y13.49175
G01 X-12.44861 Y13.45462
G01 X-12.44655 Y13.42317
G01 X-12.44525 Y13.40758
G01 X-12.44320 Y13.37611
G01 X-12.44137 Y13.33902
G01 X-12.43393 Y13.26351
G01 X-12.43393 Y12.23262
G01 X-11.84658 Y12.23262
G01 X-11.84543 Y12.23252
G01 X-11.81602 Y12.23108
G01 X-11.76791 Y12.22988
G01 X-11.46791 Y12.22988
G01 X-11.41983 Y12.23108
G01 X-11.39042 Y12.23252
G01 X-11.38920 Y12.23265
G01 X-11.29644 Y12.25109
G01 X-11.26830 Y12.25962
G01 X-11.17955 Y12.29638
G01 X-11.15361 Y12.31025
G01 X-11.07376 Y12.36361
G01 X-11.05102 Y12.38228
G01 X-10.98310 Y12.45020
G01 X-10.96443 Y12.47293
G01 X-10.91107 Y12.55279
G01 X-10.89723 Y12.57873
G01 X-10.86045 Y12.66747
G01 X-10.85191 Y12.69562
G01 X-10.83317 Y12.78982
G01 X-10.83030 Y12.81909
G01 X-10.82794 Y12.86712
G01 X-10.82794 Y13.17293
G01 X-10.82565 Y13.17844
G01 X-10.80574 Y13.24410
G01 X-10.78699 Y13.33831
G01 X-10.78028 Y13.40661
G01 X-10.77792 Y13.45462
G01 X-10.77792 Y14.09170
G01 X-10.77841 Y14.10212
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-10.50406 Y14.10278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-10.50406 Y14.10278
G01 X-10.50436 Y14.10252
G01 X-10.50558 Y14.09015
G01 X-10.50795 Y14.04212
G01 X-10.50795 Y13.73620
G01 X-10.51018 Y13.73082
G01 X-10.53009 Y13.66516
G01 X-10.54884 Y13.57095
G01 X-10.55555 Y13.50265
G01 X-10.55791 Y13.45462
G01 X-10.55791 Y12.23262
G01 X-11.38920 Y12.23265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.92789 Y13.87016 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.92789 Y13.87016
G01 X-8.90190 Y13.84418
G01 X-8.90190 Y13.64603
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-8.88537 Y13.33902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-8.88537 Y13.33902
G01 X-8.87788 Y13.26320
G01 X-8.87409 Y13.24410
G01 X-8.85418 Y13.17844
G01 X-8.85194 Y13.17306
G01 X-8.85194 Y12.86712
G01 X-8.84958 Y12.81909
G01 X-8.84668 Y12.78982
G01 X-8.82796 Y12.69562
G01 X-8.81943 Y12.66747
G01 X-8.78265 Y12.57873
G01 X-8.76881 Y12.55279
G01 X-8.71544 Y12.47293
G01 X-8.69677 Y12.45020
G01 X-8.62885 Y12.38228
G01 X-8.60612 Y12.36361
G01 X-8.52626 Y12.31025
G01 X-8.50033 Y12.29638
G01 X-8.41158 Y12.25962
G01 X-8.38344 Y12.25109
G01 X-8.29058 Y12.23262
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-7.83320 Y12.23265 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-7.83320 Y12.23265
G01 X-7.74044 Y12.25109
G01 X-7.71230 Y12.25962
G01 X-7.62355 Y12.29638
G01 X-7.59761 Y12.31025
G01 X-7.51776 Y12.36361
G01 X-7.49502 Y12.38228
G01 X-7.42710 Y12.45020
G01 X-7.40843 Y12.47293
G01 X-7.35507 Y12.55279
G01 X-7.34123 Y12.57873
G01 X-7.30445 Y12.66747
G01 X-7.29591 Y12.69562
G01 X-7.27717 Y12.78982
G01 X-7.27430 Y12.81909
G01 X-7.27194 Y12.86712
G01 X-7.27194 Y13.17293
G01 X-7.26965 Y13.17844
G01 X-7.24974 Y13.24410
G01 X-7.23099 Y13.33831
G01 X-7.22428 Y13.40661
G01 X-7.22192 Y13.45462
G01 X-7.22190 Y14.10212
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-6.94806 Y14.10278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-6.94806 Y14.10278
G01 X-6.94836 Y14.10252
G01 X-6.94958 Y14.09015
G01 X-6.95195 Y14.04212
G01 X-6.95195 Y13.73620
G01 X-6.95418 Y13.73082
G01 X-6.97409 Y13.66516
G01 X-6.99284 Y13.57095
G01 X-6.99955 Y13.50265
G01 X-7.00191 Y13.45462
G01 X-7.00191 Y12.23262
G01 X-7.83320 Y12.23265
G01 X-7.83442 Y12.23252
G01 X-7.86383 Y12.23108
G01 X-7.91194 Y12.22988
G01 X-8.21194 Y12.22988
G01 X-8.26002 Y12.23108
G01 X-8.28943 Y12.23252
G01 X-8.29058 Y12.23262
G01 X-8.87793 Y12.23262
G01 X-8.87793 Y13.26351
G01 X-8.88537 Y13.33902
G01 X-8.88875 Y13.40763
G01 X-8.88992 Y13.45462
G01 X-8.89106 Y13.50163
G01 X-8.89444 Y13.57026
G01 X-8.90190 Y13.64603
G01 X-8.90574 Y13.66516
G01 X-8.92565 Y13.73082
G01 X-8.92794 Y13.73630
G01 X-8.92789 Y13.87016
G01 X-8.99914 Y14.04212
G01 X-9.01674 Y14.08185
G01 X-9.03007 Y14.11007
G01 X-9.06675 Y14.17877
G01 X-9.08235 Y14.20476
G01 X-9.12187 Y14.26396
G01 X-9.13957 Y14.28784
G01 X-9.18207 Y14.33966
G01 X-9.20183 Y14.36147
G01 X-9.24861 Y14.40824
G01 X-9.27041 Y14.42800
G01 X-9.27211 Y14.42955
G01 X-9.29698 Y14.45192
G01 X-9.32108 Y14.47263
G01 X-9.33655 Y14.48533
G01 X-9.34524 Y14.48980
G01 X-9.39494 Y14.51299
G01 X-9.40858 Y14.51690
G01 X-9.43693 Y14.52472
G01 X-9.50429 Y14.53978
G01 X-9.50693 Y14.54024
G01 X-9.53365 Y14.54154
G01 X-9.56393 Y14.54237
G01 X-9.56794 Y14.54237
G01 X-9.67132 Y14.55060
G01 X-9.73068 Y14.55970
G01 X-9.86794 Y14.59386
G01 X-9.90871 Y14.60791
G01 X-9.93934 Y14.61908
G01 X-9.94559 Y14.62147
G01 X-9.95501 Y14.65723
G01 X-9.95918 Y14.67250
G01 X-9.96774 Y14.70288
G01 X-9.97292 Y14.72045
G01 X-9.97952 Y14.74212
G01 X-10.01267 Y14.95236
G01 X-10.01320 Y15.00907
G01 X-10.01326 Y15.01232
G01 X-10.01326 Y15.01367
G01 X-10.01163 Y15.06879
G01 X-10.00548 Y15.09287
G01 X-10.00269 Y15.10343
G01 X-9.98867 Y15.15947
G01 X-9.97526 Y15.22690
G01 X-9.97020 Y15.26089
G01 X-9.96853 Y15.29518
G01 X-9.96769 Y15.32962
G01 X-9.96769 Y17.77264
G01 X-9.96738 Y17.79284
G01 X-9.96705 Y17.80432
G01 X-9.95062 Y17.93724
G01 X-9.94429 Y17.96624
G01 X-9.92413 Y17.99238
G01 X-9.87795 Y18.04663
G01 X-9.84816 Y18.07833
G01 X-9.83104 Y18.09733
G01 X-9.75997 Y18.17907
G01 X-9.73121 Y18.21826
G01 X-9.69324 Y18.27572
G01 X-9.65626 Y18.33815
G01 X-9.61938 Y18.41410
G01 X-9.59238 Y18.47744
G01 X-9.57960 Y18.51199
G01 X-9.54742 Y18.62768
G01 X-9.53223 Y18.69499
G01 X-9.53205 Y18.69606
G01 X-9.51798 Y18.85118
G01 X-9.51572 Y18.88562
G01 X-9.51798 Y18.92009
G01 X-9.53205 Y19.07518
G01 X-9.53223 Y19.07625
G01 X-9.54742 Y19.14356
G01 X-9.57958 Y19.25918
G01 X-9.59238 Y19.29380
G01 X-9.61940 Y19.35720
G01 X-9.65626 Y19.43312
G01 X-9.69327 Y19.49555
G01 X-9.73119 Y19.55293
G01 X-9.74551 Y19.57244
G01 X-9.76004 Y19.59227
G01 X-9.83101 Y19.67391
G01 X-9.87874 Y19.72367
G01 X-9.88816 Y19.73253
G01 X-10.00058 Y19.82242
G01 X-10.03777 Y19.85016
G01 X-10.05758 Y19.86124
G01 X-10.19568 Y19.93550
G01 X-10.20518 Y19.94053
G01 X-10.25981 Y19.96073
G01 X-10.38539 Y20.00132
G01 X-10.40965 Y20.00701
G01 X-10.47747 Y20.01940
G01 X-10.57292 Y20.03205
G01 X-10.63352 Y20.03502
G01 X-10.70233 Y20.03502
G01 X-10.76294 Y20.03205
G01 X-10.85836 Y20.01940
G01 X-10.92616 Y20.00701
G01 X-10.95046 Y20.00132
G01 X-11.04089 Y19.97208
G01 X-11.07604 Y19.96073
G01 X-11.13063 Y19.94053
G01 X-11.14018 Y19.93550
G01 X-11.27828 Y19.86124
G01 X-11.29809 Y19.85016
G01 X-11.33527 Y19.82242
G01 X-11.35572 Y19.80607
G01 X-11.44762 Y19.73261
G01 X-11.45709 Y19.72364
G01 X-11.48872 Y19.69182
G01 X-11.49771 Y19.66804
G01 X-11.55382 Y19.51120
G01 X-11.57033 Y19.45687
G01 X-11.60962 Y19.30005
G01 X-11.61841 Y19.25593
G01 X-11.64168 Y19.09908
G01 X-11.64549 Y19.06068
G01 X-11.65318 Y18.90388
G01 X-11.65318 Y18.86738
G01 X-11.64549 Y18.71056
G01 X-11.64168 Y18.67216
G01 X-11.61841 Y18.51534
G01 X-11.60962 Y18.47122
G01 X-11.57035 Y18.31440
G01 X-11.55379 Y18.25999
G01 X-11.49768 Y18.10320
G01 X-11.48872 Y18.07945
G01 X-11.48658 Y18.07716
G01 X-11.47236 Y18.06203
G01 X-11.46443 Y18.05372
G01 X-11.45775 Y18.04684
G01 X-11.39047 Y17.96673
G01 X-11.38666 Y17.94488
G01 X-11.37696 Y17.88369
G01 X-11.36817 Y17.77264
G01 X-11.36817 Y15.32962
G01 X-11.36733 Y15.29518
G01 X-11.36713 Y15.29114
G01 X-11.36659 Y15.23536
G01 X-11.36685 Y15.22629
G01 X-11.36715 Y15.20407
G01 X-11.36710 Y15.15342
G01 X-11.37033 Y15.08073
G01 X-11.37213 Y15.06033
G01 X-11.38552 Y15.01499
G01 X-11.39829 Y14.97567
G01 X-11.30154 Y14.74212
G01 X-11.28752 Y14.71050
G01 X-11.27416 Y14.68228
G01 X-11.24516 Y14.62792
G01 X-11.22956 Y14.60191
G01 X-11.19860 Y14.55551
G01 X-11.18089 Y14.53163
G01 X-11.17967 Y14.52998
G01 X-11.16385 Y14.50879
G01 X-11.14876 Y14.48954
G01 X-11.13009 Y14.46681
G01 X-11.12057 Y14.45553
G01 X-11.09573 Y14.42693
G01 X-11.08572 Y14.41507
G01 X-11.07658 Y14.40392
G01 X-11.03891 Y14.36229
G01 X-11.03794 Y14.36132
G01 X-11.01663 Y14.33882
G01 X-10.99618 Y14.31616
G01 X-10.97063 Y14.28926
G01 X-10.94704 Y14.26567
G01 X-10.94218 Y14.26084
G01 X-10.88575 Y14.20539
G01 X-10.87927 Y14.19897
G01 X-10.85885 Y14.17854
G01 X-10.81793 Y14.13961
G01 X-10.81440 Y14.13641
G01 X-10.77841 Y14.10212
G01 X-10.51793 Y14.10212
G01 X-10.50406 Y14.10278
G01 X-10.50406 Y14.10280
G01 X-10.48803 Y14.11779
G01 X-10.47246 Y14.13282
G01 X-10.44541 Y14.15812
G01 X-10.40917 Y14.19091
G01 X-10.38440 Y14.21413
G01 X-10.37571 Y14.22259
G01 X-10.35179 Y14.24502
G01 X-10.32451 Y14.26958
G01 X-10.30188 Y14.29084
G01 X-10.29641 Y14.29615
G01 X-10.27422 Y14.31697
G01 X-10.25128 Y14.33757
G01 X-10.22966 Y14.35789
G01 X-10.22499 Y14.36247
G01 X-10.20353 Y14.38263
G01 X-10.18206 Y14.40189
G01 X-10.16058 Y14.42205
G01 X-10.15633 Y14.42622
G01 X-10.13472 Y14.44651
G01 X-10.11183 Y14.46709
G01 X-10.08961 Y14.48792
G01 X-10.08397 Y14.49343
G01 X-10.06134 Y14.51469
G01 X-10.03406 Y14.53925
G01 X-10.01013 Y14.56168
G01 X-10.00144 Y14.57014
G01 X-9.97668 Y14.59335
G01 X-9.94559 Y14.62147
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-11.84658 Y12.23262 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-11.84658 Y12.23262
G01 X-11.93944 Y12.25109
G01 X-11.96758 Y12.25962
G01 X-12.05633 Y12.29638
G01 X-12.08226 Y12.31025
G01 X-12.16212 Y12.36361
G01 X-12.18485 Y12.38228
G01 X-12.25277 Y12.45020
G01 X-12.27144 Y12.47293
G01 X-12.32481 Y12.55279
G01 X-12.33865 Y12.57873
G01 X-12.37543 Y12.66747
G01 X-12.38396 Y12.69562
G01 X-12.40268 Y12.78982
G01 X-12.40558 Y12.81909
G01 X-12.40794 Y12.86712
G01 X-12.40794 Y13.17306
G01 X-12.41018 Y13.17844
G01 X-12.43009 Y13.24410
G01 X-12.43388 Y13.26320
G01 X-12.44137 Y13.33902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-12.45790 Y13.56752 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-12.45790 Y13.56752
G01 X-12.45790 Y13.74377
G01 X-12.48389 Y13.76973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-14.38775 Y14.02426 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-14.38775 Y14.02426
G01 X-14.37393 Y14.02360
G01 X-14.07393 Y14.02360
G01 X-14.06006 Y14.02426
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-13.50159 Y14.54296 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-13.50159 Y14.54296
G01 X-13.53268 Y14.51484
G01 X-13.55744 Y14.49162
G01 X-13.56613 Y14.48317
G01 X-13.59006 Y14.46074
G01 X-13.61734 Y14.43618
G01 X-13.63997 Y14.41492
G01 X-13.64561 Y14.40940
G01 X-13.66783 Y14.38858
G01 X-13.69072 Y14.36800
G01 X-13.71233 Y14.34771
G01 X-13.71658 Y14.34354
G01 X-13.73806 Y14.32337
G01 X-13.75968 Y14.30397
G01 X-13.78114 Y14.28383
G01 X-13.78569 Y14.27938
G01 X-13.80730 Y14.25909
G01 X-13.83001 Y14.23867
G01 X-13.85224 Y14.21784
G01 X-13.85788 Y14.21233
G01 X-13.88051 Y14.19107
G01 X-13.90779 Y14.16650
G01 X-13.93171 Y14.14408
G01 X-13.94040 Y14.13562
G01 X-13.96517 Y14.11240
G01 X-14.00177 Y14.07931
G01 X-14.02882 Y14.05401
G01 X-14.04406 Y14.03928
G01 X-14.06006 Y14.02429
G01 X-14.06006 Y14.02426
G01 X-14.06036 Y14.02401
G01 X-14.06158 Y14.01164
G01 X-14.06395 Y13.96361
G01 X-14.06395 Y13.65769
G01 X-14.06618 Y13.65231
G01 X-14.08609 Y13.58665
G01 X-14.10484 Y13.49244
G01 X-14.11155 Y13.42414
G01 X-14.11391 Y13.37611
G01 X-14.11391 Y12.23262
G01 X-14.70829 Y12.23262
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-15.63956 Y12.23262 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-15.63956 Y12.23262
G01 X-15.98993 Y12.23262
G01 X-15.98988 Y13.00415
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.94377 Y14.10278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.94377 Y14.10278
G01 X-17.92993 Y14.10212
G01 X-17.62993 Y14.10212
G01 X-17.61606 Y14.10278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.05759 Y14.62147 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.05759 Y14.62147
G01 X-17.08868 Y14.59335
G01 X-17.11344 Y14.57014
G01 X-17.12213 Y14.56168
G01 X-17.14606 Y14.53925
G01 X-17.17334 Y14.51469
G01 X-17.19597 Y14.49343
G01 X-17.20158 Y14.48792
G01 X-17.22383 Y14.46709
G01 X-17.24669 Y14.44651
G01 X-17.26831 Y14.42622
G01 X-17.27258 Y14.42205
G01 X-17.29406 Y14.40189
G01 X-17.31553 Y14.38263
G01 X-17.33699 Y14.36247
G01 X-17.34166 Y14.35789
G01 X-17.36328 Y14.33757
G01 X-17.38622 Y14.31697
G01 X-17.40841 Y14.29615
G01 X-17.41388 Y14.29084
G01 X-17.43648 Y14.26958
G01 X-17.46376 Y14.24502
G01 X-17.48771 Y14.22259
G01 X-17.49638 Y14.21413
G01 X-17.52114 Y14.19091
G01 X-17.55741 Y14.15812
G01 X-17.58446 Y14.13282
G01 X-17.60003 Y14.11779
G01 X-17.61606 Y14.10278
G01 X-17.61636 Y14.10252
G01 X-17.61758 Y14.09015
G01 X-17.61992 Y14.04212
G01 X-17.61992 Y13.73620
G01 X-17.62218 Y13.73082
G01 X-17.64209 Y13.66516
G01 X-17.66084 Y13.57095
G01 X-17.66752 Y13.50265
G01 X-17.66991 Y13.45462
G01 X-17.66991 Y12.23262
G01 X-18.50120 Y12.23265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.95858 Y12.23262 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.95858 Y12.23262
G01 X-19.54593 Y12.23262
G01 X-19.54588 Y13.08266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.49977 Y14.10278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.49977 Y14.10278
G01 X-21.48593 Y14.10212
G01 X-21.18593 Y14.10212
G01 X-21.17206 Y14.10278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-20.61359 Y14.62147 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-20.61359 Y14.62147
G01 X-20.64468 Y14.59335
G01 X-20.66944 Y14.57014
G01 X-20.67813 Y14.56168
G01 X-20.70206 Y14.53925
G01 X-20.72934 Y14.51469
G01 X-20.75197 Y14.49343
G01 X-20.75761 Y14.48792
G01 X-20.77983 Y14.46709
G01 X-20.80272 Y14.44651
G01 X-20.82433 Y14.42622
G01 X-20.82858 Y14.42205
G01 X-20.85006 Y14.40189
G01 X-20.87153 Y14.38263
G01 X-20.89299 Y14.36247
G01 X-20.89766 Y14.35789
G01 X-20.91928 Y14.33757
G01 X-20.94222 Y14.31697
G01 X-20.96441 Y14.29615
G01 X-20.96988 Y14.29084
G01 X-20.99251 Y14.26958
G01 X-21.01979 Y14.24502
G01 X-21.04371 Y14.22259
G01 X-21.05240 Y14.21413
G01 X-21.07717 Y14.19091
G01 X-21.11341 Y14.15812
G01 X-21.14046 Y14.13282
G01 X-21.15603 Y14.11779
G01 X-21.17206 Y14.10280
G01 X-21.17206 Y14.10278
G01 X-21.17236 Y14.10252
G01 X-21.17358 Y14.09015
G01 X-21.17595 Y14.04212
G01 X-21.17595 Y13.73620
G01 X-21.17818 Y13.73082
G01 X-21.19809 Y13.66516
G01 X-21.21684 Y13.57095
G01 X-21.22355 Y13.50265
G01 X-21.22591 Y13.45462
G01 X-21.22591 Y12.23262
G01 X-22.05720 Y12.23265
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.30503 Y10.01231 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.30503 Y10.01231
G01 X-21.29215 Y10.04264
G01 X-21.27422 Y10.10113
G01 X-21.25461 Y10.20164
G01 X-21.25631 Y10.30400
G01 X-21.27922 Y10.40380
G01 X-21.29909 Y10.46169
G01 X-21.33317 Y10.53497
G01 X-21.36749 Y10.55264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-22.51458 Y12.23262 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-22.51458 Y12.23262
G01 X-22.84569 Y12.23262
G01 X-23.10193 Y12.48886
G01 X-23.10188 Y13.08266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.78191 Y12.29958 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.78191 Y12.29958
G01 X-24.78191 Y13.45462
G01 X-24.77955 Y13.50265
G01 X-24.77284 Y13.57095
G01 X-24.75409 Y13.66516
G01 X-24.73418 Y13.73082
G01 X-24.73195 Y13.73620
G01 X-24.73195 Y14.04212
G01 X-24.72958 Y14.09015
G01 X-24.72836 Y14.10252
G01 X-24.72806 Y14.10278
G01 X-24.72806 Y14.10280
G01 X-24.71203 Y14.11779
G01 X-24.69646 Y14.13282
G01 X-24.66941 Y14.15812
G01 X-24.63317 Y14.19091
G01 X-24.60840 Y14.21413
G01 X-24.59971 Y14.22259
G01 X-24.57579 Y14.24502
G01 X-24.54851 Y14.26958
G01 X-24.52588 Y14.29084
G01 X-24.52041 Y14.29615
G01 X-24.49822 Y14.31697
G01 X-24.47528 Y14.33757
G01 X-24.45366 Y14.35789
G01 X-24.44899 Y14.36247
G01 X-24.42753 Y14.38263
G01 X-24.40606 Y14.40189
G01 X-24.38458 Y14.42205
G01 X-24.38033 Y14.42622
G01 X-24.35872 Y14.44651
G01 X-24.33583 Y14.46709
G01 X-24.31361 Y14.48792
G01 X-24.30797 Y14.49343
G01 X-24.28534 Y14.51469
G01 X-24.25806 Y14.53925
G01 X-24.23413 Y14.56168
G01 X-24.22544 Y14.57014
G01 X-24.20068 Y14.59335
G01 X-24.16959 Y14.62147
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.72806 Y14.10278 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.72806 Y14.10278
G01 X-24.74193 Y14.10212
G01 X-25.04193 Y14.10212
G01 X-25.05577 Y14.10278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.07502 Y17.57877 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.07502 Y17.57877
G01 X-28.09884 Y17.60262
G01 X-28.14591 Y17.59797
G01 X-28.24197 Y17.59797
G01 X-28.28901 Y17.60262
G01 X-28.31284 Y17.57877
G01 X-28.29209 Y17.57564
G01 X-28.09574 Y17.57564
G01 X-28.07502 Y17.57877
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.47695 Y18.79055 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.47695 Y18.79055
G01 X-29.74441 Y18.52309
G01 X-29.75340 Y18.52499
G01 X-29.81423 Y18.53139
G01 X-29.91672 Y18.53139
G01 X-29.94725 Y18.52492
G01 X-30.21294 Y18.79057
G01 X-30.20829 Y18.83759
G01 X-30.20829 Y18.93365
G01 X-30.21294 Y18.98067
G01 X-29.94545 Y19.24816
G01 X-29.93643 Y19.24625
G01 X-29.87557 Y19.23985
G01 X-29.77308 Y19.23985
G01 X-29.74258 Y19.24633
G01 X-29.47695 Y18.98072
G01 X-29.48157 Y18.93365
G01 X-29.48157 Y18.83759
G01 X-29.47695 Y18.79055
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.37699 Y20.19250 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.37699 Y20.19250
G01 X-31.39774 Y20.19563
G01 X-31.59411 Y20.19563
G01 X-31.61486 Y20.19250
G01 X-31.59099 Y20.16863
G01 X-31.54397 Y20.17325
G01 X-31.44791 Y20.17325
G01 X-31.40087 Y20.16863
G01 X-31.37699 Y20.19250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.77895 Y18.79055 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.77895 Y18.79055
G01 X-32.78357 Y18.83759
G01 X-32.78357 Y18.93365
G01 X-32.77895 Y18.98072
G01 X-32.80084 Y19.00261
G01 X-32.80960 Y18.88562
G01 X-32.80084 Y18.76865
G01 X-32.77895 Y18.79055
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.37702 Y17.57877 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.37702 Y17.57877
G01 X-31.39774 Y17.57564
G01 X-31.59409 Y17.57564
G01 X-31.61484 Y17.57877
G01 X-31.59101 Y17.60262
G01 X-31.54397 Y17.59797
G01 X-31.44791 Y17.59797
G01 X-31.40084 Y17.60262
G01 X-31.37702 Y17.57877
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.07499 Y20.19250 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.07499 Y20.19250
G01 X-28.09887 Y20.16863
G01 X-28.14591 Y20.17325
G01 X-28.24197 Y20.17325
G01 X-28.28899 Y20.16863
G01 X-28.31286 Y20.19250
G01 X-28.29211 Y20.19563
G01 X-28.09574 Y20.19563
G01 X-28.07499 Y20.19250
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.17495 Y23.50624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.17495 Y23.50624
G01 X-26.19684 Y23.48434
G01 X-26.20560 Y23.60131
G01 X-26.19684 Y23.71830
G01 X-26.17495 Y23.69641
G01 X-26.17957 Y23.64934
G01 X-26.17957 Y23.55328
G01 X-26.17495 Y23.50624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.77299 Y24.90822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.77299 Y24.90822
G01 X-24.79687 Y24.88434
G01 X-24.84391 Y24.88896
G01 X-24.93997 Y24.88896
G01 X-24.98699 Y24.88434
G01 X-25.01086 Y24.90822
G01 X-24.99011 Y24.91131
G01 X-24.79374 Y24.91131
G01 X-24.77299 Y24.90822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-22.61895 Y23.50624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-22.61895 Y23.50624
G01 X-22.73993 Y23.38526
G01 X-22.75511 Y23.40022
G01 X-22.84145 Y23.45539
G01 X-22.93736 Y23.49138
G01 X-22.99657 Y23.50677
G01 X-23.09786 Y23.52204
G01 X-23.20012 Y23.51591
G01 X-23.29888 Y23.48866
G01 X-23.35582 Y23.46631
G01 X-23.43853 Y23.42442
G01 X-23.48846 Y23.38582
G01 X-23.60894 Y23.50626
G01 X-23.60429 Y23.55328
G01 X-23.60429 Y23.64934
G01 X-23.60894 Y23.69636
G01 X-23.48790 Y23.81739
G01 X-23.47274 Y23.80243
G01 X-23.38651 Y23.74733
G01 X-23.29070 Y23.71134
G01 X-23.23149 Y23.69592
G01 X-23.13010 Y23.68061
G01 X-23.02773 Y23.68673
G01 X-22.92888 Y23.71403
G01 X-22.87190 Y23.73641
G01 X-22.78923 Y23.77830
G01 X-22.73939 Y23.81685
G01 X-22.61895 Y23.69641
G01 X-22.62357 Y23.64934
G01 X-22.62357 Y23.55328
G01 X-22.61895 Y23.50624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.21699 Y24.90822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.21699 Y24.90822
G01 X-21.24087 Y24.88434
G01 X-21.28791 Y24.88896
G01 X-21.38397 Y24.88896
G01 X-21.43099 Y24.88434
G01 X-21.45486 Y24.90822
G01 X-21.43411 Y24.91131
G01 X-21.23774 Y24.91131
G01 X-21.21699 Y24.90822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.06295 Y23.50624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.06295 Y23.50624
G01 X-19.18393 Y23.38526
G01 X-19.19911 Y23.40022
G01 X-19.28545 Y23.45539
G01 X-19.38136 Y23.49138
G01 X-19.44057 Y23.50677
G01 X-19.54186 Y23.52204
G01 X-19.64412 Y23.51591
G01 X-19.74288 Y23.48866
G01 X-19.79982 Y23.46631
G01 X-19.88253 Y23.42442
G01 X-19.93246 Y23.38582
G01 X-20.05294 Y23.50626
G01 X-20.04829 Y23.55328
G01 X-20.04829 Y23.64934
G01 X-20.05294 Y23.69636
G01 X-19.93190 Y23.81739
G01 X-19.91674 Y23.80243
G01 X-19.83051 Y23.74733
G01 X-19.73470 Y23.71134
G01 X-19.67549 Y23.69592
G01 X-19.57410 Y23.68061
G01 X-19.47173 Y23.68673
G01 X-19.37288 Y23.71403
G01 X-19.31590 Y23.73641
G01 X-19.23323 Y23.77830
G01 X-19.18339 Y23.81685
G01 X-19.06295 Y23.69641
G01 X-19.06757 Y23.64934
G01 X-19.06757 Y23.55328
G01 X-19.06295 Y23.50624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.66099 Y24.90822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.66099 Y24.90822
G01 X-17.68487 Y24.88434
G01 X-17.73191 Y24.88896
G01 X-17.82797 Y24.88896
G01 X-17.87499 Y24.88434
G01 X-17.89884 Y24.90822
G01 X-17.87811 Y24.91131
G01 X-17.68174 Y24.91131
G01 X-17.66099 Y24.90822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.57410 Y27.50994 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.57410 Y27.50994
G01 X-19.57410 Y27.50996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.56330 Y27.50686 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.56330 Y27.50686
G01 X-19.57410 Y27.50994
G01 X-19.65352 Y27.48954
G01 X-19.73696 Y27.45025
G01 X-19.74778 Y27.44385
G01 X-19.77432 Y27.42701
G01 X-19.83752 Y27.38390
G01 X-19.91710 Y27.32967
G01 X-20.09398 Y27.24448
G01 X-20.28161 Y27.18660
G01 X-20.47574 Y27.15733
G01 X-20.67209 Y27.15733
G01 X-20.69286 Y27.16046
G01 X-20.66901 Y27.18431
G01 X-20.62197 Y27.17966
G01 X-20.52591 Y27.17966
G01 X-20.36983 Y27.19508
G01 X-20.27562 Y27.21380
G01 X-20.12555 Y27.25932
G01 X-20.03681 Y27.29609
G01 X-19.89850 Y27.37001
G01 X-19.81862 Y27.42337
G01 X-19.69739 Y27.52287
G01 X-19.64181 Y27.57839
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-18.23193 Y30.09434 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-18.23193 Y30.09434
G01 X-18.20907 Y30.10655
G01 X-18.12033 Y30.14331
G01 X-18.11192 Y30.14587
G01 X-18.11192 Y30.26477
G01 X-18.12033 Y30.26731
G01 X-18.20907 Y30.30406
G01 X-18.23188 Y30.31626
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.91189 Y29.57178 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.91189 Y29.57178
G01 X-20.03681 Y29.63856
G01 X-20.12555 Y29.67531
G01 X-20.23625 Y29.70889
G01 X-20.27562 Y29.72083
G01 X-20.36983 Y29.73957
G01 X-20.52591 Y29.75494
G01 X-20.62197 Y29.75494
G01 X-20.66899 Y29.75032
G01 X-20.69286 Y29.77419
G01 X-20.67211 Y29.77732
G01 X-20.47577 Y29.77732
G01 X-20.30922 Y29.75222
G01 X-20.23249 Y29.74676
G01 X-20.15586 Y29.75337
G01 X-20.09548 Y29.76340
G01 X-19.99673 Y29.79068
G01 X-19.92370 Y29.82858
G01 X-19.91192 Y29.84951
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-22.19411 Y28.78855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-22.19411 Y28.78855
G01 X-21.86157 Y28.45606
G01 X-21.86157 Y28.41928
G01 X-21.85695 Y28.37229
G01 X-22.06368 Y28.16556
G01 X-22.08499 Y28.17501
G01 X-22.18514 Y28.19630
G01 X-22.24600 Y28.20270
G01 X-22.28034 Y28.20300
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.14817 Y31.45661 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.14817 Y31.45661
G01 X-27.23700 Y31.43284
G01 X-27.31703 Y31.39205
G01 X-27.37393 Y31.28796
G01 X-27.39925 Y31.22677
G01 X-27.45528 Y31.01633
G01 X-27.46077 Y30.97010
G01 X-27.46567 Y30.88717
G01 X-27.46567 Y30.10633
G01 X-27.46651 Y30.07186
G01 X-27.46821 Y30.03762
G01 X-27.47324 Y30.00358
G01 X-27.48668 Y29.93615
G01 X-27.49503 Y29.90282
G01 X-27.50659 Y29.87049
G01 X-27.53293 Y29.80688
G01 X-27.54761 Y29.77582
G01 X-27.56524 Y29.74638
G01 X-27.60352 Y29.68910
G01 X-27.62396 Y29.66155
G01 X-27.64705 Y29.63607
G01 X-27.67078 Y29.61118
G01 X-29.02262 Y28.25934
G01 X-29.09577 Y28.18621
G01 X-29.12066 Y28.16249
G01 X-29.14616 Y28.13940
G01 X-29.17369 Y28.11895
G01 X-29.23097 Y28.08068
G01 X-29.26041 Y28.06305
G01 X-29.29147 Y28.04837
G01 X-29.35508 Y28.02200
G01 X-29.38741 Y28.01044
G01 X-29.42074 Y28.00209
G01 X-29.48820 Y27.98865
G01 X-29.51606 Y27.98451
G01 X-29.52203 Y27.98365
G01 X-29.55650 Y27.98195
G01 X-29.59094 Y27.98111
G01 X-29.98340 Y27.98111
G01 X-30.09455 Y27.97227
G01 X-30.15576 Y27.96257
G01 X-30.17707 Y27.95886
G01 X-30.25723 Y27.89160
G01 X-30.26988 Y27.87933
G01 X-30.28116 Y27.86861
G01 X-30.30130 Y27.84992
G01 X-30.30750 Y27.84423
G01 X-30.33719 Y27.81735
G01 X-30.33740 Y27.81718
G01 X-30.34898 Y27.80666
G01 X-30.42889 Y27.74494
G01 X-30.48545 Y27.70552
G01 X-30.49447 Y27.69990
G01 X-30.62409 Y27.63221
G01 X-30.65507 Y27.61700
G01 X-30.68769 Y27.60587
G01 X-30.82721 Y27.56203
G01 X-30.83755 Y27.55967
G01 X-30.90547 Y27.54755
G01 X-31.00567 Y27.53465
G01 X-31.06152 Y27.53191
G01 X-31.09594 Y27.53110
G01 X-31.89594 Y27.53110
G01 X-31.93033 Y27.53191
G01 X-31.98616 Y27.53465
G01 X-32.08636 Y27.54755
G01 X-32.15426 Y27.55967
G01 X-32.16462 Y27.56203
G01 X-32.30414 Y27.60587
G01 X-32.33681 Y27.61700
G01 X-32.36777 Y27.63221
G01 X-32.48552 Y27.69368
G01 X-32.50699 Y27.70443
G01 X-32.57102 Y27.73511
G01 X-32.58804 Y27.74301
G01 X-32.64587 Y27.76899
G01 X-32.72174 Y27.79863
G01 X-32.81120 Y27.82873
G01 X-32.86810 Y27.84618
G01 X-32.88209 Y27.84329
G01 X-32.89170 Y27.84133
G01 X-33.06553 Y27.84133
G01 X-33.11354 Y27.84372
G01 X-33.18184 Y27.85040
G01 X-33.26751 Y27.86744
G01 X-33.27427 Y27.87488
G01 X-33.30031 Y27.90661
G01 X-33.32690 Y27.93780
G01 X-33.36518 Y27.98095
G01 X-33.38717 Y28.00674
G01 X-33.43429 Y28.06411
G01 X-33.47107 Y28.11270
G01 X-33.47877 Y28.12378
G01 X-33.51214 Y28.16798
G01 X-33.52169 Y28.17961
G01 X-33.54166 Y28.20519
G01 X-33.60795 Y28.29454
G01 X-33.64592 Y28.34085
G01 X-33.75138 Y28.45720
G01 X-33.79208 Y28.49787
G01 X-33.90841 Y28.60333
G01 X-33.95471 Y28.64133
G01 X-34.08204 Y28.73577
G01 X-34.13807 Y28.77316
G01 X-34.27673 Y28.85626
G01 X-34.34803 Y28.89429
G01 X-34.49863 Y28.96551
G01 X-34.56462 Y28.99294
G01 X-34.56545 Y28.99330
G01 X-34.58448 Y29.01232
G01 X-35.67912 Y29.01232
G01 X-35.89067 Y29.10938
G01 X-35.95186 Y29.12576
G01 X-36.10388 Y29.15007
G01 X-36.12456 Y29.15113
G01 X-36.16078 Y29.15207
G01 X-38.73880 Y29.15207
G01 X-38.84967 Y29.14328
G01 X-38.91086 Y29.13361
G01 X-38.91683 Y29.13264
G01 X-39.02516 Y29.05017
G01 X-39.03657 Y29.03965
G01 X-39.05645 Y29.02050
G01 X-39.80809 Y28.26886
G01 X-39.88033 Y28.18421
G01 X-39.91675 Y28.13407
G01 X-39.92023 Y28.12927
G01 X-39.93852 Y27.99432
G01 X-39.93913 Y27.97882
G01 X-39.93969 Y27.95124
G01 X-39.93969 Y27.00029
G01 X-39.93087 Y26.88924
G01 X-39.92117 Y26.82805
G01 X-39.91739 Y26.80621
G01 X-39.85013 Y26.72612
G01 X-39.84307 Y26.71885
G01 X-39.83517 Y26.71057
G01 X-39.82125 Y26.69577
G01 X-39.80301 Y26.67560
G01 X-39.73204 Y26.59396
G01 X-39.70319 Y26.55464
G01 X-39.66621 Y26.49881
G01 X-39.66524 Y26.49724
G01 X-39.60126 Y26.40671
G01 X-39.57078 Y26.36991
G01 X-39.56151 Y26.35853
G01 X-39.52163 Y26.30849
G01 X-39.39930 Y26.18172
G01 X-39.38401 Y26.16841
G01 X-39.38277 Y26.16732
G01 X-39.36768 Y26.09145
G01 X-39.35229 Y25.93537
G01 X-39.35229 Y25.83928
G01 X-39.36768 Y25.68325
G01 X-39.38231 Y25.60966
G01 X-39.38256 Y25.60941
G01 X-39.40042 Y25.59330
G01 X-39.51172 Y25.47558
G01 X-39.51965 Y25.46559
G01 X-39.55351 Y25.42556
G01 X-39.57179 Y25.40532
G01 X-39.64340 Y25.31208
G01 X-39.65170 Y25.29922
G01 X-39.66527 Y25.27740
G01 X-39.66621 Y25.27580
G01 X-39.70319 Y25.22000
G01 X-39.73204 Y25.18068
G01 X-39.80301 Y25.09905
G01 X-39.85074 Y25.04931
G01 X-39.86021 Y25.04035
G01 X-39.97258 Y24.95053
G01 X-40.00967 Y24.92285
G01 X-40.01030 Y24.92249
G01 X-40.02943 Y24.91144
G01 X-40.10441 Y24.86143
G01 X-40.15376 Y24.82389
G01 X-40.15848 Y24.82028
G01 X-40.21982 Y24.77281
G01 X-40.34736 Y24.65292
G01 X-40.36580 Y24.63224
G01 X-40.36963 Y24.62821
G01 X-40.36963 Y24.62818
G01 X-40.37164 Y24.62612
G01 X-40.37880 Y24.57225
G01 X-40.38162 Y24.46979
G01 X-40.36308 Y24.36897
G01 X-40.32396 Y24.27423
G01 X-40.29483 Y24.22043
G01 X-40.25010 Y24.15211
G01 X-40.19465 Y24.09219
G01 X-40.19168 Y24.08947
G01 X-40.18406 Y24.08266
G01 X-40.03517 Y23.95206
G01 X-39.88736 Y23.78353
G01 X-39.76283 Y23.59717
G01 X-39.75452 Y23.58033
G01 X-39.78622 Y23.58033
G01 X-39.81703 Y23.63799
G01 X-39.87040 Y23.71784
G01 X-40.01962 Y23.89968
G01 X-40.08757 Y23.96763
G01 X-40.26941 Y24.11685
G01 X-40.34926 Y24.17022
G01 X-40.55673 Y24.28111
G01 X-40.64548 Y24.31787
G01 X-40.87060 Y24.38614
G01 X-40.96481 Y24.40489
G01 X-41.19892 Y24.42795
G01 X-41.29496 Y24.42795
G01 X-41.44174 Y24.41350
G01 X-41.52907 Y24.40489
G01 X-41.57535 Y24.39569
G01 X-41.57535 Y24.47182
G01 X-41.55543 Y24.48668
G01 X-41.48012 Y24.55625
G01 X-41.42097 Y24.63999
G01 X-41.38050 Y24.73415
G01 X-41.36237 Y24.79259
G01 X-41.35729 Y24.81744
G01 X-41.37608 Y24.86674
G01 X-41.45167 Y25.02180
G01 X-41.46788 Y25.04819
G01 X-41.49061 Y25.08774
G01 X-41.49582 Y25.09747
G01 X-41.55038 Y25.18424
G01 X-41.57667 Y25.22005
G01 X-41.61461 Y25.27746
G01 X-41.65160 Y25.33986
G01 X-41.68845 Y25.41583
G01 X-41.71398 Y25.47517
G01 X-41.71461 Y25.47933
G01 X-41.73788 Y25.63618
G01 X-41.74418 Y25.69978
G01 X-41.75188 Y25.85660
G01 X-41.75188 Y25.91804
G01 X-41.74418 Y26.07486
G01 X-41.73788 Y26.13849
G01 X-41.71461 Y26.29531
G01 X-41.71398 Y26.29947
G01 X-41.68845 Y26.35886
G01 X-41.65157 Y26.43481
G01 X-41.61461 Y26.49719
G01 X-41.57667 Y26.55464
G01 X-41.54781 Y26.59396
G01 X-41.47685 Y26.67560
G01 X-41.45861 Y26.69577
G01 X-41.42991 Y26.72632
G01 X-41.38373 Y26.78060
G01 X-41.36354 Y26.80674
G01 X-41.35721 Y26.83572
G01 X-41.34078 Y26.96864
G01 X-41.34045 Y26.98007
G01 X-41.34017 Y27.00029
G01 X-41.34017 Y28.42736
G01 X-41.33933 Y28.46178
G01 X-41.33763 Y28.49609
G01 X-41.33260 Y28.53008
G01 X-41.32828 Y28.55581
G01 X-41.32246 Y28.58375
G01 X-41.31916 Y28.59754
G01 X-41.31083 Y28.63086
G01 X-41.29925 Y28.66320
G01 X-41.27291 Y28.72680
G01 X-41.25823 Y28.75786
G01 X-41.24057 Y28.78730
G01 X-41.20230 Y28.84458
G01 X-41.18190 Y28.87209
G01 X-41.15876 Y28.89764
G01 X-41.13506 Y28.92251
G01 X-41.06191 Y28.99563
G01 X-39.78325 Y30.27432
G01 X-39.71007 Y30.34747
G01 X-39.68518 Y30.37120
G01 X-39.65975 Y30.39423
G01 X-39.63214 Y30.41471
G01 X-39.57487 Y30.45298
G01 X-39.54543 Y30.47064
G01 X-39.51437 Y30.48532
G01 X-39.45076 Y30.51166
G01 X-39.41843 Y30.52322
G01 X-39.38510 Y30.53157
G01 X-39.31767 Y30.54501
G01 X-39.28363 Y30.55004
G01 X-39.24939 Y30.55174
G01 X-39.21495 Y30.55258
G01 X-37.41805 Y30.55258
G01 X-37.30718 Y30.56137
G01 X-37.24599 Y30.57104
G01 X-36.99331 Y30.65542
G01 X-36.93212 Y30.68659
G01 X-36.92219 Y30.69238
G01 X-36.87627 Y30.77193
G01 X-36.84848 Y30.85743
G01 X-36.85366 Y30.87513
G01 X-36.85369 Y30.87516
G01 X-36.88188 Y30.97125
G01 X-36.90723 Y31.03243
G01 X-37.01648 Y31.22093
G01 X-37.04528 Y31.25748
G01 X-37.10040 Y31.31948
G01 X-38.01394 Y32.23304
G01 X-38.08706 Y32.30619
G01 X-38.11079 Y32.33109
G01 X-38.13388 Y32.35656
G01 X-38.15432 Y32.38412
G01 X-38.19260 Y32.44140
G01 X-38.21023 Y32.47084
G01 X-38.22493 Y32.50190
G01 X-38.25127 Y32.56550
G01 X-38.26283 Y32.59781
G01 X-38.27116 Y32.63116
G01 X-38.28460 Y32.69860
G01 X-38.28963 Y32.73263
G01 X-38.29133 Y32.76687
G01 X-38.29217 Y32.80134
G01 X-38.29217 Y34.89781
G01 X-38.30096 Y35.00886
G01 X-38.31066 Y35.07004
G01 X-38.32151 Y35.12509
G01 X-38.38922 Y35.19941
G01 X-38.44101 Y35.24906
G01 X-38.44536 Y35.25315
G01 X-38.49021 Y35.29547
G01 X-38.51437 Y35.31729
G01 X-38.65526 Y35.34246
G01 X-38.68625 Y35.34490
G01 X-38.74142 Y35.34708
G01 X-39.52404 Y35.34708
G01 X-39.63509 Y35.33829
G01 X-39.69628 Y35.32859
G01 X-39.72079 Y35.32427
G01 X-39.80045 Y35.25694
G01 X-39.81642 Y35.24132
G01 X-39.83067 Y35.22780
G01 X-39.85071 Y35.20926
G01 X-39.85658 Y35.20380
G01 X-39.86029 Y35.20030
G01 X-39.96189 Y35.11909
G01 X-39.97258 Y35.11053
G01 X-40.00974 Y35.08280
G01 X-40.02958 Y35.07172
G01 X-40.04794 Y35.06184
G01 X-40.16768 Y34.99745
G01 X-40.17715 Y34.99245
G01 X-40.23181 Y34.97223
G01 X-40.35739 Y34.93164
G01 X-40.38165 Y34.92595
G01 X-40.44947 Y34.91355
G01 X-40.54494 Y34.90088
G01 X-40.60552 Y34.89791
G01 X-40.67433 Y34.89791
G01 X-40.73491 Y34.90088
G01 X-40.83036 Y34.91355
G01 X-40.89816 Y34.92595
G01 X-40.92246 Y34.93164
G01 X-41.04804 Y34.97223
G01 X-41.10265 Y34.99242
G01 X-41.11218 Y34.99745
G01 X-41.25028 Y35.07172
G01 X-41.27009 Y35.08280
G01 X-41.30727 Y35.11053
G01 X-41.41962 Y35.20035
G01 X-41.42912 Y35.20931
G01 X-41.47685 Y35.25905
G01 X-41.54781 Y35.34068
G01 X-41.57667 Y35.38000
G01 X-41.61461 Y35.43746
G01 X-41.65157 Y35.49984
G01 X-41.68845 Y35.57581
G01 X-41.71398 Y35.63517
G01 X-41.71461 Y35.63933
G01 X-41.73788 Y35.79618
G01 X-41.74418 Y35.85978
G01 X-41.75188 Y36.01660
G01 X-41.75188 Y36.07804
G01 X-41.74418 Y36.23486
G01 X-41.73788 Y36.29849
G01 X-41.71461 Y36.45531
G01 X-41.71398 Y36.45947
G01 X-41.68845 Y36.51883
G01 X-41.65157 Y36.59481
G01 X-41.61461 Y36.65719
G01 X-41.57667 Y36.71464
G01 X-41.54781 Y36.75396
G01 X-41.47685 Y36.83560
G01 X-41.42912 Y36.88533
G01 X-41.41962 Y36.89430
G01 X-41.34428 Y36.95450
G01 X-41.30727 Y36.98411
G01 X-41.27006 Y37.01187
G01 X-41.25033 Y37.02290
G01 X-41.11220 Y37.09719
G01 X-41.10263 Y37.10225
G01 X-41.07131 Y37.11446
G01 X-41.04809 Y37.12287
G01 X-40.96798 Y37.15762
G01 X-40.91256 Y37.18574
G01 X-40.90453 Y37.18988
G01 X-40.83481 Y37.22630
G01 X-40.68673 Y37.32259
G01 X-40.67085 Y37.33496
G01 X-40.66951 Y37.33603
G01 X-40.66793 Y37.33971
G01 X-40.65000 Y37.39821
G01 X-40.63994 Y37.44977
G01 X-40.62958 Y37.39719
G01 X-40.61154 Y37.33875
G01 X-40.61045 Y37.33616
G01 X-40.59313 Y37.32262
G01 X-40.44502 Y37.22630
G01 X-40.37530 Y37.18985
G01 X-40.36684 Y37.18551
G01 X-40.31157 Y37.15747
G01 X-40.23174 Y37.12287
G01 X-40.20852 Y37.11446
G01 X-40.17720 Y37.10225
G01 X-40.16765 Y37.09719
G01 X-40.02953 Y37.02290
G01 X-40.00977 Y37.01185
G01 X-39.97258 Y36.98411
G01 X-39.86029 Y36.89435
G01 X-39.85663 Y36.89089
G01 X-39.85071 Y36.88538
G01 X-39.79973 Y36.83829
G01 X-39.77378 Y36.81543
G01 X-39.72607 Y36.77543
G01 X-39.72059 Y36.77085
G01 X-39.57868 Y36.74942
G01 X-39.55904 Y36.74845
G01 X-39.52404 Y36.74759
G01 X-38.70776 Y36.74759
G01 X-38.59674 Y36.75638
G01 X-38.53555 Y36.76608
G01 X-38.51104 Y36.77037
G01 X-38.43141 Y36.83771
G01 X-38.41518 Y36.85356
G01 X-38.40098 Y36.86704
G01 X-38.38114 Y36.88538
G01 X-38.37535 Y36.89077
G01 X-38.37159 Y36.89435
G01 X-38.29628 Y36.95450
G01 X-38.25927 Y36.98411
G01 X-38.22206 Y37.01187
G01 X-38.20233 Y37.02290
G01 X-38.06420 Y37.09719
G01 X-38.05463 Y37.10225
G01 X-37.99997 Y37.12247
G01 X-37.87446 Y37.16303
G01 X-37.85011 Y37.16872
G01 X-37.78236 Y37.18111
G01 X-37.68694 Y37.19376
G01 X-37.62633 Y37.19674
G01 X-37.55752 Y37.19674
G01 X-37.49692 Y37.19376
G01 X-37.40147 Y37.18111
G01 X-37.33370 Y37.16872
G01 X-37.30939 Y37.16303
G01 X-37.18386 Y37.12247
G01 X-37.12920 Y37.10225
G01 X-37.11965 Y37.09719
G01 X-36.98153 Y37.02290
G01 X-36.96177 Y37.01185
G01 X-36.92458 Y36.98411
G01 X-36.81224 Y36.89430
G01 X-36.80274 Y36.88536
G01 X-36.76817 Y36.85030
G01 X-36.75501 Y36.83560
G01 X-36.68404 Y36.75399
G01 X-36.65519 Y36.71464
G01 X-36.63505 Y36.68569
G01 X-36.61727 Y36.65724
G01 X-36.58028 Y36.59481
G01 X-36.54340 Y36.51889
G01 X-36.51638 Y36.45551
G01 X-36.50360 Y36.42099
G01 X-36.47145 Y36.30527
G01 X-36.45623 Y36.23796
G01 X-36.45605 Y36.23687
G01 X-36.44198 Y36.08178
G01 X-36.43972 Y36.04733
G01 X-36.44198 Y36.01287
G01 X-36.45605 Y35.85775
G01 X-36.45623 Y35.85668
G01 X-36.45646 Y35.85544
G01 X-36.47142 Y35.78940
G01 X-36.50360 Y35.67370
G01 X-36.51638 Y35.63913
G01 X-36.54340 Y35.57576
G01 X-36.58026 Y35.49986
G01 X-36.61727 Y35.43740
G01 X-36.64795 Y35.39006
G01 X-36.65519 Y35.38000
G01 X-36.68407 Y35.34066
G01 X-36.75501 Y35.25905
G01 X-36.77053 Y35.24177
G01 X-36.77282 Y35.23934
G01 X-36.80195 Y35.20835
G01 X-36.84818 Y35.15404
G01 X-36.86829 Y35.12793
G01 X-36.87464 Y35.09885
G01 X-36.89105 Y34.96603
G01 X-36.89138 Y34.95460
G01 X-36.89166 Y34.93436
G01 X-36.89166 Y33.27746
G01 X-36.88287 Y33.16644
G01 X-36.87317 Y33.10525
G01 X-36.87223 Y33.09944
G01 X-36.79001 Y32.99138
G01 X-36.77947 Y32.97995
G01 X-36.76009 Y32.95979
G01 X-36.44526 Y32.64495
G01 X-36.36050 Y32.57264
G01 X-36.31036 Y32.53624
G01 X-36.07233 Y32.41740
G01 X-36.00706 Y32.39616
G01 X-35.99603 Y32.39337
G01 X-35.66398 Y32.06131
G01 X-35.65804 Y32.06131
G01 X-35.62242 Y32.03998
G01 X-35.53523 Y31.99322
G01 X-35.37841 Y31.91905
G01 X-35.31295 Y31.89187
G01 X-35.15611 Y31.83574
G01 X-35.10579 Y31.82044
G01 X-34.94897 Y31.78118
G01 X-34.90866 Y31.77312
G01 X-34.75181 Y31.74986
G01 X-34.71714 Y31.74643
G01 X-34.56032 Y31.73873
G01 X-34.52753 Y31.73873
G01 X-34.37069 Y31.74643
G01 X-34.33599 Y31.74986
G01 X-34.17917 Y31.77312
G01 X-34.13889 Y31.78118
G01 X-33.98207 Y31.82044
G01 X-33.93175 Y31.83574
G01 X-33.77490 Y31.89187
G01 X-33.70945 Y31.91905
G01 X-33.55263 Y31.99322
G01 X-33.46551 Y32.03993
G01 X-33.42980 Y32.06134
G01 X-33.37270 Y32.16817
G01 X-33.33594 Y32.25692
G01 X-33.29040 Y32.40701
G01 X-33.28174 Y32.45054
G01 X-33.27168 Y32.50122
G01 X-33.25629 Y32.65727
G01 X-33.25629 Y32.75334
G01 X-33.27168 Y32.90942
G01 X-33.29040 Y33.00363
G01 X-33.33594 Y33.15369
G01 X-33.37270 Y33.24244
G01 X-33.44661 Y33.38074
G01 X-33.49998 Y33.46062
G01 X-33.59947 Y33.58186
G01 X-33.66739 Y33.64978
G01 X-33.70394 Y33.67975
G01 X-33.70394 Y34.81038
G01 X-33.05299 Y35.46133
G01 X-32.87039 Y35.46133
G01 X-32.84039 Y35.42478
G01 X-32.77247 Y35.35686
G01 X-32.65123 Y35.25737
G01 X-32.57138 Y35.20400
G01 X-32.43307 Y35.13006
G01 X-32.34433 Y35.09331
G01 X-32.19424 Y35.04779
G01 X-32.11141 Y35.03131
G01 X-30.88040 Y35.03133
G01 X-30.79762 Y35.04779
G01 X-30.64756 Y35.09331
G01 X-30.55881 Y35.13006
G01 X-30.42050 Y35.20400
G01 X-30.34062 Y35.25737
G01 X-30.21939 Y35.35686
G01 X-30.15147 Y35.42478
G01 X-30.05198 Y35.54601
G01 X-29.99861 Y35.62587
G01 X-29.92470 Y35.76418
G01 X-29.88794 Y35.85292
G01 X-29.84240 Y36.00301
G01 X-29.82368 Y36.09722
G01 X-29.80829 Y36.25328
G01 X-29.80829 Y36.34934
G01 X-29.82368 Y36.50542
G01 X-29.84240 Y36.59963
G01 X-29.88794 Y36.74970
G01 X-29.92470 Y36.83844
G01 X-29.99861 Y36.97675
G01 X-30.05198 Y37.05663
G01 X-30.15147 Y37.17786
G01 X-30.21939 Y37.24578
G01 X-30.34062 Y37.34527
G01 X-30.42050 Y37.39864
G01 X-30.55881 Y37.47255
G01 X-30.64756 Y37.50931
G01 X-30.79762 Y37.55485
G01 X-30.88040 Y37.57133
G01 X-32.11141 Y37.57133
G01 X-32.19424 Y37.58779
G01 X-32.28606 Y37.61563
G01 X-32.33229 Y37.67314
G01 X-32.39375 Y37.74355
G01 X-32.47216 Y37.82206
G01 X-32.51136 Y37.85622
G01 X-32.51941 Y37.86333
G01 X-32.56416 Y37.90346
G01 X-32.60386 Y37.93651
G01 X-32.64295 Y37.96671
G01 X-32.68436 Y38.00423
G01 X-32.73302 Y38.05289
G01 X-32.77054 Y38.09432
G01 X-32.83234 Y38.17428
G01 X-32.87173 Y38.23085
G01 X-32.87740 Y38.23986
G01 X-32.94504 Y38.36948
G01 X-32.96025 Y38.40047
G01 X-32.97140 Y38.43311
G01 X-33.01522 Y38.57260
G01 X-33.01760 Y38.58299
G01 X-33.02972 Y38.65089
G01 X-33.04260 Y38.75109
G01 X-33.04534 Y38.80692
G01 X-33.04534 Y38.87573
G01 X-33.04260 Y38.93158
G01 X-33.02972 Y39.03178
G01 X-33.01760 Y39.09970
G01 X-33.01522 Y39.11009
G01 X-32.97140 Y39.24956
G01 X-32.96025 Y39.28218
G01 X-32.94504 Y39.31316
G01 X-32.87740 Y39.44278
G01 X-32.87173 Y39.45180
G01 X-32.83234 Y39.50836
G01 X-32.77054 Y39.58832
G01 X-32.73302 Y39.62975
G01 X-32.68436 Y39.67842
G01 X-32.64295 Y39.71593
G01 X-32.60386 Y39.74613
G01 X-32.56416 Y39.77918
G01 X-32.51936 Y39.81936
G01 X-32.51141 Y39.82640
G01 X-32.47209 Y39.86066
G01 X-32.39381 Y39.93907
G01 X-32.33221 Y40.00958
G01 X-32.28649 Y40.06650
G01 X-32.28646 Y40.06650
G01 X-32.28611 Y40.06699
G01 X-32.19424 Y40.09485
G01 X-32.11141 Y40.11133
G01 X-30.88040 Y40.11133
G01 X-30.79762 Y40.12779
G01 X-30.64756 Y40.17331
G01 X-30.55881 Y40.21006
G01 X-30.42050 Y40.28400
G01 X-30.34062 Y40.33737
G01 X-30.21939 Y40.43686
G01 X-30.15147 Y40.50478
G01 X-30.05198 Y40.62601
G01 X-29.99861 Y40.70587
G01 X-29.92470 Y40.84418
G01 X-29.88794 Y40.93292
G01 X-29.84240 Y41.08301
G01 X-29.82368 Y41.17722
G01 X-29.80829 Y41.33328
G01 X-29.80829 Y41.42934
G01 X-29.82368 Y41.58542
G01 X-29.84240 Y41.67963
G01 X-29.88794 Y41.82970
G01 X-29.92470 Y41.91844
G01 X-29.99861 Y42.05675
G01 X-30.05198 Y42.13663
G01 X-30.15147 Y42.25786
G01 X-30.21939 Y42.32578
G01 X-30.34062 Y42.42527
G01 X-30.42050 Y42.47864
G01 X-30.55881 Y42.55255
G01 X-30.64756 Y42.58931
G01 X-30.79762 Y42.63485
G01 X-30.88040 Y42.65133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.49141 Y40.11133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.49141 Y40.11133
G01 X-24.57424 Y40.12779
G01 X-24.72433 Y40.17331
G01 X-24.81307 Y40.21006
G01 X-24.95138 Y40.28400
G01 X-25.03123 Y40.33737
G01 X-25.15247 Y40.43686
G01 X-25.22039 Y40.50478
G01 X-25.31988 Y40.62601
G01 X-25.37325 Y40.70587
G01 X-25.44718 Y40.84418
G01 X-25.48394 Y40.93292
G01 X-25.52946 Y41.08301
G01 X-25.54820 Y41.17722
G01 X-25.56357 Y41.33328
G01 X-25.56357 Y41.42934
G01 X-25.54820 Y41.58542
G01 X-25.52946 Y41.67963
G01 X-25.48394 Y41.82970
G01 X-25.44718 Y41.91844
G01 X-25.37325 Y42.05675
G01 X-25.31988 Y42.13663
G01 X-25.22039 Y42.25786
G01 X-25.15247 Y42.32578
G01 X-25.03123 Y42.42527
G01 X-24.95138 Y42.47864
G01 X-24.81307 Y42.55255
G01 X-24.72433 Y42.58931
G01 X-24.71592 Y42.59187
G01 X-24.71592 Y42.63132
G01 X-25.07594 Y42.63132
G01 X-25.17154 Y42.64072
G01 X-25.26344 Y42.66861
G01 X-25.34818 Y42.71389
G01 X-25.42242 Y42.77483
G01 X-25.48335 Y42.84907
G01 X-25.52864 Y42.93381
G01 X-25.55653 Y43.02573
G01 X-25.56593 Y43.12131
G01 X-25.56593 Y44.72131
G01 X-25.55653 Y44.81691
G01 X-25.52864 Y44.90884
G01 X-25.48335 Y44.99354
G01 X-25.42242 Y45.06779
G01 X-25.34818 Y45.12872
G01 X-25.26344 Y45.17401
G01 X-25.17154 Y45.20190
G01 X-25.07594 Y45.21132
G01 X-24.71592 Y45.21132
G01 X-24.71592 Y46.20731
G01 X-24.71356 Y46.25534
G01 X-24.70685 Y46.32364
G01 X-24.68811 Y46.41785
G01 X-24.66819 Y46.48351
G01 X-24.63144 Y46.57226
G01 X-24.59908 Y46.63276
G01 X-24.54571 Y46.71262
G01 X-24.50220 Y46.76565
G01 X-24.46989 Y46.80129
G01 X-23.15191 Y48.11927
G01 X-23.15191 Y48.59948
G01 X-23.22382 Y48.65849
G01 X-23.29174 Y48.72643
G01 X-23.31691 Y48.75709
G01 X-23.39746 Y48.85523
G01 X-23.45082 Y48.93509
G01 X-23.52938 Y49.08206
G01 X-23.56192 Y49.16062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.32592 Y46.35826 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.32592 Y46.35826
G01 X-27.32595 Y46.77637
G01 X-26.71795 Y47.38437
G01 X-26.68564 Y47.42001
G01 X-26.64213 Y47.47304
G01 X-26.58876 Y47.55290
G01 X-26.55640 Y47.61340
G01 X-26.51965 Y47.70215
G01 X-26.49974 Y47.76781
G01 X-26.48099 Y47.86202
G01 X-26.48043 Y47.86768
G01 X-26.47428 Y47.93032
G01 X-26.47192 Y47.97832
G01 X-26.47192 Y48.59951
G01 X-26.40004 Y48.65849
G01 X-26.33212 Y48.72643
G01 X-26.22641 Y48.85523
G01 X-26.17304 Y48.93509
G01 X-26.09450 Y49.08206
G01 X-26.06192 Y49.16059
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.06192 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.06192 Y50.36592
G01 X-26.09450 Y50.44459
G01 X-26.17304 Y50.59153
G01 X-26.22641 Y50.67141
G01 X-26.33212 Y50.80021
G01 X-26.40004 Y50.86813
G01 X-26.47192 Y50.92711
G01 X-26.47187 Y51.35434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.56194 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.56194 Y50.36592
G01 X-28.59450 Y50.44459
G01 X-28.67304 Y50.59153
G01 X-28.72640 Y50.67141
G01 X-28.80692 Y50.76950
G01 X-28.83212 Y50.80021
G01 X-28.90004 Y50.86813
G01 X-28.98480 Y50.93770
G01 X-28.99976 Y51.01286
G01 X-29.01967 Y51.07852
G01 X-29.05645 Y51.16727
G01 X-29.08878 Y51.22777
G01 X-29.14215 Y51.30765
G01 X-29.18568 Y51.36069
G01 X-29.21797 Y51.39630
G01 X-29.94796 Y52.12632
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.56691 Y54.90432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.56691 Y54.90432
G01 X-31.62840 Y54.96576
G01 X-31.72789 Y55.08700
G01 X-31.78126 Y55.16688
G01 X-31.85517 Y55.30518
G01 X-31.89195 Y55.39393
G01 X-31.93747 Y55.54399
G01 X-31.95393 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.95393 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.95393 Y56.05771
G01 X-31.97041 Y56.14061
G01 X-32.01593 Y56.29070
G01 X-32.05268 Y56.37945
G01 X-32.12662 Y56.51775
G01 X-32.17999 Y56.59761
G01 X-32.27948 Y56.71885
G01 X-32.34740 Y56.78676
G01 X-32.46863 Y56.88626
G01 X-32.54849 Y56.93962
G01 X-32.68679 Y57.01356
G01 X-32.77554 Y57.05032
G01 X-32.92563 Y57.09583
G01 X-33.01603 Y57.11382
G01 X-33.01984 Y57.11458
G01 X-33.17590 Y57.12994
G01 X-33.27196 Y57.12994
G01 X-33.42804 Y57.11458
G01 X-33.52225 Y57.09583
G01 X-33.67231 Y57.05032
G01 X-33.76106 Y57.01356
G01 X-33.89939 Y56.93962
G01 X-33.97925 Y56.88626
G01 X-34.10048 Y56.78676
G01 X-34.16840 Y56.71885
G01 X-34.26789 Y56.59761
G01 X-34.32126 Y56.51775
G01 X-34.39517 Y56.37945
G01 X-34.43195 Y56.29070
G01 X-34.47747 Y56.14061
G01 X-34.49393 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.09096 Y59.66232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.09096 Y59.66232
G01 X-32.32891 Y59.66232
G01 X-32.31669 Y59.63944
G01 X-32.27994 Y59.55069
G01 X-32.23442 Y59.40063
G01 X-32.22749 Y59.36583
G01 X-30.08995 Y57.22829
G01 X-30.05764 Y57.19266
G01 X-30.01413 Y57.13962
G01 X-29.96076 Y57.05976
G01 X-29.92841 Y56.99926
G01 X-29.89165 Y56.91051
G01 X-29.87174 Y56.84485
G01 X-29.87049 Y56.83856
G01 X-29.80740 Y56.78676
G01 X-29.73948 Y56.71885
G01 X-29.65891 Y56.62067
G01 X-29.63999 Y56.59761
G01 X-29.58662 Y56.51775
G01 X-29.51268 Y56.37945
G01 X-29.47593 Y56.29070
G01 X-29.43041 Y56.14061
G01 X-29.41390 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.41390 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.41390 Y55.62670
G01 X-29.43041 Y55.54399
G01 X-29.47593 Y55.39393
G01 X-29.51268 Y55.30518
G01 X-29.58662 Y55.16688
G01 X-29.63999 Y55.08700
G01 X-29.73948 Y54.96576
G01 X-29.80092 Y54.90435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.02691 Y54.90432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.02691 Y54.90432
G01 X-29.08840 Y54.96576
G01 X-29.18789 Y55.08700
G01 X-29.24126 Y55.16688
G01 X-29.31517 Y55.30518
G01 X-29.35195 Y55.39393
G01 X-29.39747 Y55.54399
G01 X-29.41390 Y55.62670
G01 X-29.41390 Y56.05771
G01 X-29.39747 Y56.14061
G01 X-29.35195 Y56.29070
G01 X-29.31517 Y56.37945
G01 X-29.24126 Y56.51775
G01 X-29.18789 Y56.59761
G01 X-29.08840 Y56.71885
G01 X-29.02048 Y56.78676
G01 X-28.89925 Y56.88626
G01 X-28.81939 Y56.93962
G01 X-28.68106 Y57.01356
G01 X-28.59231 Y57.05032
G01 X-28.44225 Y57.09583
G01 X-28.34804 Y57.11458
G01 X-28.19196 Y57.12994
G01 X-28.09590 Y57.12994
G01 X-27.93984 Y57.11458
G01 X-27.84563 Y57.09583
G01 X-27.69554 Y57.05032
G01 X-27.60679 Y57.01356
G01 X-27.46849 Y56.93962
G01 X-27.38863 Y56.88626
G01 X-27.26740 Y56.78676
G01 X-27.19948 Y56.71885
G01 X-27.09999 Y56.59761
G01 X-27.04662 Y56.51775
G01 X-26.97268 Y56.37945
G01 X-26.93593 Y56.29070
G01 X-26.89389 Y56.15209
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.36798 Y59.94233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.36798 Y59.94233
G01 X-25.62491 Y59.94231
G01 X-25.62491 Y61.68538
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-28.72719 Y63.64601 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-28.72719 Y63.64601
G01 X-28.49793 Y63.87527
G01 X-28.49793 Y67.35037
G01 X-30.42688 Y69.27932
G01 X-31.66493 Y69.27932
G01 X-31.76053 Y69.28872
G01 X-31.85246 Y69.31661
G01 X-31.93716 Y69.36190
G01 X-32.01141 Y69.42283
G01 X-32.07237 Y69.49708
G01 X-32.11763 Y69.58179
G01 X-32.14552 Y69.67371
G01 X-32.15494 Y69.76931
G01 X-32.15494 Y70.92659
G01 X-32.15492 Y71.31125
G01 X-32.05957 Y71.46931
G01 X-32.03257 Y71.52555
G01 X-32.01400 Y71.56174
G01 X-31.97956 Y71.62466
G01 X-31.97189 Y71.63827
G01 X-31.94163 Y71.68613
G01 X-31.88172 Y71.74604
G01 X-31.86140 Y71.75956
G01 X-31.80559 Y71.79176
G01 X-31.72660 Y71.82461
G01 X-31.66709 Y71.84645
G01 X-31.66490 Y71.84716
G01 X-31.57676 Y71.88117
G01 X-31.53473 Y72.03576
G01 X-31.52464 Y72.09694
G01 X-31.51517 Y72.21221
G01 X-31.51517 Y72.78625
G01 X-31.52396 Y72.89715
G01 X-31.53242 Y72.95069
G01 X-31.53648 Y72.95742
G01 X-31.55042 Y72.98084
G01 X-31.59879 Y73.05191
G01 X-31.64232 Y73.10830
G01 X-31.68174 Y73.16486
G01 X-31.68741 Y73.17388
G01 X-31.75505 Y73.30350
G01 X-31.77026 Y73.33448
G01 X-31.78141 Y73.36715
G01 X-31.82520 Y73.50654
G01 X-31.82761 Y73.51703
G01 X-31.83970 Y73.58483
G01 X-31.85258 Y73.68508
G01 X-31.85355 Y73.70474
G01 X-31.85624 Y73.74076
G01 X-31.85972 Y73.77533
G01 X-31.86498 Y73.81579
G01 X-31.87468 Y73.87698
G01 X-31.95896 Y74.12940
G01 X-31.99012 Y74.19057
G01 X-31.99594 Y74.19892
G01 X-31.99790 Y74.20172
G01 X-32.07544 Y74.24652
G01 X-32.17290 Y74.27820
G01 X-32.27483 Y74.28891
G01 X-32.33602 Y74.28891
G01 X-32.35560 Y74.28686
G01 X-32.43787 Y74.27820
G01 X-32.53531 Y74.24655
G01 X-32.62401 Y74.19534
G01 X-32.67351 Y74.15937
G01 X-32.74097 Y74.10019
G01 X-32.79652 Y74.02973
G01 X-32.80216 Y74.02105
G01 X-32.81552 Y73.99923
G01 X-32.86802 Y73.90830
G01 X-32.99779 Y73.74558
G01 X-33.04084 Y73.68191
G01 X-33.07343 Y73.61228
G01 X-33.09495 Y73.55498
G01 X-33.11341 Y73.48394
G01 X-33.11341 Y73.67388
G01 X-33.07689 Y73.70385
G01 X-33.00897 Y73.77177
G01 X-32.90948 Y73.89300
G01 X-32.85611 Y73.97286
G01 X-32.78220 Y74.11119
G01 X-32.74544 Y74.19994
G01 X-32.69990 Y74.35000
G01 X-32.68118 Y74.44421
G01 X-32.66579 Y74.60029
G01 X-32.66579 Y74.69633
G01 X-32.68118 Y74.85241
G01 X-32.69990 Y74.94662
G01 X-32.71194 Y74.98632
G01 X-32.67343 Y74.98632
G01 X-32.66757 Y74.97428
G01 X-32.62357 Y74.91127
G01 X-32.58471 Y74.86400
G01 X-32.51174 Y74.79211
G01 X-32.42540 Y74.73694
G01 X-32.32949 Y74.70095
G01 X-32.27029 Y74.68556
G01 X-32.16899 Y74.67030
G01 X-32.06673 Y74.67642
G01 X-31.98591 Y74.69869
G01 X-31.98591 Y74.69872
G01 X-31.97239 Y74.71492
G01 X-31.92914 Y74.77212
G01 X-31.87262 Y74.84726
G01 X-31.80524 Y74.95310
G01 X-31.78812 Y74.98553
G01 X-31.78598 Y74.98952
G01 X-31.75507 Y75.04718
G01 X-31.75141 Y75.05409
G01 X-31.71496 Y75.12396
G01 X-31.64476 Y75.16603
G01 X-31.60745 Y75.18688
G01 X-31.58738 Y75.19727
G01 X-31.58029 Y75.20100
G01 X-31.51479 Y75.23603
G01 X-31.47199 Y75.26163
G01 X-31.44255 Y75.28129
G01 X-31.41192 Y75.30004
G01 X-31.40519 Y75.30380
G01 X-31.37643 Y75.32137
G01 X-31.31911 Y75.35968
G01 X-31.28784 Y75.38287
G01 X-31.27549 Y75.39298
G01 X-31.24425 Y75.41614
G01 X-31.23272 Y75.42386
G01 X-31.21644 Y75.43534
G01 X-31.11636 Y75.50954
G01 X-31.07885 Y75.53458
G01 X-31.01916 Y75.57034
G01 X-30.92983 Y75.58360
G01 X-30.88449 Y75.58807
G01 X-30.72891 Y75.59574
G01 X-30.72769 Y75.59579
G01 X-30.70712 Y75.59686
G01 X-30.68403 Y75.59747
G01 X-30.67763 Y75.59747
G01 X-30.63280 Y75.59968
G01 X-30.60295 Y75.60263
G01 X-30.55464 Y75.60982
G01 X-30.53338 Y75.61403
G01 X-30.52820 Y75.62267
G01 X-30.50323 Y75.66925
G01 X-30.48931 Y75.69866
G01 X-30.47288 Y75.73826
G01 X-30.46236 Y75.76768
G01 X-30.45177 Y75.80247
G01 X-30.44441 Y75.83189
G01 X-30.43806 Y75.86374
G01 X-30.43369 Y75.89315
G01 X-30.43072 Y75.92325
G01 X-30.42929 Y75.95266
G01 X-30.42891 Y75.96735
G01 X-30.42894 Y76.33963
G01 X-30.42591 Y76.35162
G01 X-30.42028 Y76.37989
G01 X-30.41012 Y76.44847
G01 X-30.40760 Y76.47395
G01 X-30.40422 Y76.54258
G01 X-30.40422 Y76.56717
G01 X-30.40760 Y76.63577
G01 X-30.41012 Y76.66122
G01 X-30.42028 Y76.72983
G01 X-30.42594 Y76.75812
G01 X-30.42894 Y76.77009
G01 X-30.42891 Y77.14232
G01 X-30.42929 Y77.15701
G01 X-30.43072 Y77.18642
G01 X-30.43369 Y77.21654
G01 X-30.43806 Y77.24593
G01 X-30.44441 Y77.27776
G01 X-30.45177 Y77.30717
G01 X-30.46236 Y77.34197
G01 X-30.47288 Y77.37138
G01 X-30.48931 Y77.41098
G01 X-30.50323 Y77.44039
G01 X-30.52807 Y77.48677
G01 X-30.54570 Y77.51619
G01 X-30.58322 Y77.57212
G01 X-30.60504 Y77.60153
G01 X-30.66224 Y77.67095
G01 X-30.68891 Y77.70036
G01 X-30.72894 Y77.74232
G01 X-30.76889 Y77.78230
G01 X-30.76889 Y77.90712
G01 X-30.68870 Y78.07036
G01 X-30.66882 Y78.13158
G01 X-30.63376 Y78.30524
G01 X-30.63132 Y78.33623
G01 X-30.62917 Y78.39137
G01 X-30.62917 Y78.42980
G01 X-30.62833 Y78.46424
G01 X-30.62663 Y78.49858
G01 X-30.62160 Y78.53257
G01 X-30.60819 Y78.60003
G01 X-30.59681 Y78.64542
G01 X-30.59099 Y78.66653
G01 X-30.58947 Y78.67234
G01 X-30.58451 Y78.69048
G01 X-30.58256 Y78.71037
G01 X-30.57918 Y78.77920
G01 X-30.57918 Y79.01733
G01 X-30.57831 Y79.05187
G01 X-30.57702 Y79.07834
G01 X-30.57651 Y79.08126
G01 X-30.56147 Y79.14842
G01 X-30.55368 Y79.17679
G01 X-30.54977 Y79.19033
G01 X-30.52670 Y79.23981
G01 X-30.51327 Y79.26592
G01 X-30.49198 Y79.30430
G01 X-30.47870 Y79.32652
G01 X-30.46394 Y79.35248
G01 X-30.43488 Y79.40613
G01 X-30.42774 Y79.41900
G01 X-30.41222 Y79.44643
G01 X-30.40250 Y79.46320
G01 X-30.36620 Y79.52413
G01 X-30.34893 Y79.55423
G01 X-30.31957 Y79.60747
G01 X-30.31931 Y79.60795
G01 X-30.27857 Y79.62482
G01 X-30.25045 Y79.63333
G01 X-30.15622 Y79.65210
G01 X-30.12696 Y79.65494
G01 X-30.07893 Y79.65731
G01 X-29.77893 Y79.65731
G01 X-29.73092 Y79.65494
G01 X-29.70163 Y79.65210
G01 X-29.60743 Y79.63333
G01 X-29.57931 Y79.62482
G01 X-29.49056 Y79.58804
G01 X-29.46463 Y79.57417
G01 X-29.38474 Y79.52081
G01 X-29.36201 Y79.50216
G01 X-29.29409 Y79.43424
G01 X-29.27545 Y79.41154
G01 X-29.22208 Y79.33163
G01 X-29.20821 Y79.30569
G01 X-29.17146 Y79.21697
G01 X-29.16293 Y79.18883
G01 X-29.14418 Y79.09459
G01 X-29.14128 Y79.06533
G01 X-29.13895 Y79.01733
G01 X-29.13895 Y78.71146
G01 X-29.13666 Y78.70600
G01 X-29.11675 Y78.64034
G01 X-29.09800 Y78.54613
G01 X-29.09130 Y78.47786
G01 X-29.08894 Y78.42980
G01 X-29.08894 Y77.78230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-25.28277 Y77.76668 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.28277 Y77.76668
G01 X-25.26677 Y77.78167
G01 X-25.26651 Y77.78192
G01 X-25.26530 Y77.79429
G01 X-25.26293 Y77.84235
G01 X-25.26293 Y78.03191
G01 X-24.98341 Y78.31139
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.93903 Y77.78162 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.93903 Y77.78162
G01 X-24.95293 Y77.78230
G01 X-25.25293 Y77.78230
G01 X-25.26682 Y77.78167
G01 X-25.28277 Y77.76668
G01 X-25.29796 Y77.75205
G01 X-25.32506 Y77.72670
G01 X-25.36179 Y77.69345
G01 X-25.38653 Y77.67026
G01 X-25.39522 Y77.66181
G01 X-25.41912 Y77.63940
G01 X-25.44635 Y77.61489
G01 X-25.46898 Y77.59363
G01 X-25.47462 Y77.58815
G01 X-25.49682 Y77.56729
G01 X-25.51955 Y77.54687
G01 X-25.54116 Y77.52658
G01 X-25.54571 Y77.52211
G01 X-25.56720 Y77.50194
G01 X-25.58864 Y77.48271
G01 X-25.61013 Y77.46254
G01 X-25.61452 Y77.45822
G01 X-25.63614 Y77.43793
G01 X-25.65922 Y77.41718
G01 X-25.68142 Y77.39635
G01 X-25.68709 Y77.39081
G01 X-25.70972 Y77.36958
G01 X-25.73680 Y77.34519
G01 X-25.76072 Y77.32277
G01 X-25.76933 Y77.31441
G01 X-25.77830 Y77.30577
G01 X-25.78643 Y77.30486
G01 X-25.82542 Y77.30054
G01 X-25.83451 Y77.29960
G01 X-25.86377 Y77.29671
G01 X-25.89374 Y77.29432
G01 X-25.90294 Y77.29376
G01 X-25.97248 Y77.28650
G01 X-26.04109 Y77.27631
G01 X-26.11701 Y77.26150
G01 X-26.12288 Y77.25718
G01 X-26.17860 Y77.21588
G01 X-26.24193 Y77.16391
G01 X-26.29283 Y77.11779
G01 X-26.32178 Y77.09023
G01 X-27.39252 Y76.01947
G01 X-27.42148 Y75.99191
G01 X-27.47238 Y75.94578
G01 X-27.53570 Y75.89381
G01 X-27.59143 Y75.85251
G01 X-27.66427 Y75.80390
G01 X-27.72493 Y75.76752
G01 X-27.73252 Y75.76303
G01 X-27.81584 Y75.76745
G01 X-27.88424 Y75.77418
G01 X-27.88548 Y75.77431
G01 X-27.92793 Y75.77842
G01 X-27.96829 Y75.78137
G01 X-28.12513 Y75.78909
G01 X-28.20674 Y75.78909
G01 X-28.28952 Y75.78502
G01 X-28.35884 Y75.73362
G01 X-28.35962 Y75.73308
G01 X-28.38668 Y75.71418
G01 X-28.42168 Y75.68866
G01 X-28.44563 Y75.67192
G01 X-28.47116 Y75.65485
G01 X-28.52620 Y75.62180
G01 X-28.55266 Y75.60766
G01 X-28.55985 Y75.60387
G01 X-28.60555 Y75.58022
G01 X-28.61225 Y75.57669
G01 X-28.63148 Y75.56641
G01 X-28.68439 Y75.54141
G01 X-28.71169 Y75.53011
G01 X-28.75635 Y75.51360
G01 X-28.76892 Y75.50951
G01 X-28.79747 Y75.49943
G01 X-28.81685 Y75.49209
G01 X-28.82892 Y75.48764
G01 X-28.97359 Y75.43588
G01 X-29.05150 Y75.40352
G01 X-29.12864 Y75.36704
G01 X-29.15713 Y75.28734
G01 X-29.18157 Y75.20707
G01 X-29.22084 Y75.05025
G01 X-29.23455 Y74.98142
G01 X-29.23887 Y74.95231
G01 X-29.24459 Y74.91937
G01 X-29.25805 Y74.85175
G01 X-29.26361 Y74.82635
G01 X-29.27258 Y74.78909
G01 X-29.27814 Y74.76372
G01 X-29.28652 Y74.72163
G01 X-29.30283 Y74.65660
G01 X-29.31698 Y74.60997
G01 X-29.32287 Y74.58952
G01 X-29.32670 Y74.57532
G01 X-29.34494 Y74.51741
G01 X-29.36950 Y74.44881
G01 X-29.38505 Y74.40850
G01 X-29.43592 Y74.28569
G01 X-29.43592 Y73.55973
G01 X-29.41947 Y73.47700
G01 X-29.37395 Y73.32691
G01 X-29.33719 Y73.23819
G01 X-29.26326 Y73.09986
G01 X-29.20989 Y73.02001
G01 X-29.19092 Y72.99689
G01 X-29.11492 Y72.90428
G01 X-29.11492 Y71.65813
G01 X-29.18683 Y71.59913
G01 X-29.25475 Y71.53121
G01 X-29.36046 Y71.40241
G01 X-29.41383 Y71.32252
G01 X-29.47491 Y71.20825
G01 X-29.48418 Y71.17122
G01 X-29.50262 Y71.07879
G01 X-29.52734 Y70.91214
G01 X-29.53572 Y70.82722
G01 X-29.54319 Y70.67498
G01 X-29.53783 Y70.65999
G01 X-29.50555 Y70.58181
G01 X-29.42988 Y70.42187
G01 X-29.39968 Y70.36522
G01 X-29.31136 Y70.21788
G01 X-29.28279 Y70.17508
G01 X-29.18246 Y70.03980
G01 X-29.15429 Y70.00546
G01 X-29.04225 Y69.88181
G01 X-29.01240 Y69.85199
G01 X-28.88881 Y69.73995
G01 X-28.85449 Y69.71181
G01 X-28.71919 Y69.61145
G01 X-28.67636 Y69.58288
G01 X-28.52902 Y69.49456
G01 X-28.47238 Y69.46436
G01 X-28.31243 Y69.38870
G01 X-28.23425 Y69.35641
G01 X-28.12485 Y69.31727
G01 X-27.49950 Y68.69192
G01 X-27.25488 Y68.10137
G01 X-27.24672 Y68.08021
G01 X-27.22216 Y68.01158
G01 X-27.21132 Y67.97592
G01 X-27.19415 Y67.90732
G01 X-27.18802 Y67.87671
G01 X-27.17786 Y67.80810
G01 X-27.17512 Y67.78037
G01 X-27.17174 Y67.71174
G01 X-27.17141 Y67.69830
G01 X-27.17141 Y63.52732
G01 X-27.17174 Y63.51390
G01 X-27.17512 Y63.44530
G01 X-27.17786 Y63.41756
G01 X-27.18576 Y63.36430
G01 X-27.19389 Y63.35073
G01 X-27.20989 Y63.32676
G01 X-27.25119 Y63.27105
G01 X-27.26745 Y63.25124
G01 X-27.31358 Y63.20034
G01 X-27.32203 Y63.19145
G01 X-28.44703 Y62.06646
G01 X-28.45592 Y62.05800
G01 X-28.50682 Y62.01188
G01 X-28.52663 Y61.99562
G01 X-28.58233 Y61.95432
G01 X-28.59394 Y61.94614
G01 X-28.60794 Y61.94370
G01 X-28.67654 Y61.93354
G01 X-28.70202 Y61.93103
G01 X-28.77065 Y61.92765
G01 X-28.78292 Y61.92734
G01 X-35.02994 Y61.92734
G01 X-35.04224 Y61.92704
G01 X-35.11084 Y61.92366
G01 X-35.13629 Y61.92115
G01 X-35.20490 Y61.91099
G01 X-35.23314 Y61.90535
G01 X-35.30175 Y61.88815
G01 X-35.33495 Y61.87807
G01 X-35.40355 Y61.85351
G01 X-35.42342 Y61.84584
G01 X-36.10784 Y61.56235
G01 X-36.56055 Y61.10967
G01 X-36.94886 Y60.72133
G01 X-36.99590 Y60.72595
G01 X-37.09197 Y60.72595
G01 X-37.24805 Y60.71058
G01 X-37.34226 Y60.69184
G01 X-37.49232 Y60.64632
G01 X-37.58107 Y60.60957
G01 X-37.71937 Y60.53563
G01 X-37.79926 Y60.48226
G01 X-37.92046 Y60.38277
G01 X-37.98841 Y60.31485
G01 X-38.08788 Y60.19362
G01 X-38.14127 Y60.11376
G01 X-38.21518 Y59.97546
G01 X-38.25193 Y59.88671
G01 X-38.29748 Y59.73662
G01 X-38.31620 Y59.64241
G01 X-38.33159 Y59.48635
G01 X-38.33159 Y59.39029
G01 X-38.31620 Y59.23421
G01 X-38.29748 Y59.14000
G01 X-38.25193 Y58.98994
G01 X-38.21518 Y58.90119
G01 X-38.14127 Y58.76288
G01 X-38.08788 Y58.68300
G01 X-37.98841 Y58.56177
G01 X-37.92046 Y58.49385
G01 X-37.79926 Y58.39436
G01 X-37.71937 Y58.34099
G01 X-37.58107 Y58.26708
G01 X-37.49232 Y58.23030
G01 X-37.34226 Y58.18478
G01 X-37.24805 Y58.16604
G01 X-37.09197 Y58.15067
G01 X-36.99590 Y58.15067
G01 X-36.94884 Y58.15532
G01 X-36.60391 Y57.81038
G01 X-36.60391 Y56.81679
G01 X-36.64048 Y56.78676
G01 X-36.70840 Y56.71885
G01 X-36.80789 Y56.59761
G01 X-36.86126 Y56.51775
G01 X-36.93517 Y56.37945
G01 X-36.97195 Y56.29070
G01 X-37.01747 Y56.14061
G01 X-37.03393 Y56.05771
G01 X-37.03393 Y55.62670
G01 X-37.01747 Y55.54399
G01 X-36.97195 Y55.39393
G01 X-36.93517 Y55.30518
G01 X-36.86126 Y55.16688
G01 X-36.80789 Y55.08700
G01 X-36.78892 Y55.06388
G01 X-36.70840 Y54.96576
G01 X-36.64048 Y54.89784
G01 X-36.51925 Y54.79835
G01 X-36.43939 Y54.74499
G01 X-36.30106 Y54.67107
G01 X-36.21231 Y54.63432
G01 X-36.06225 Y54.58878
G01 X-35.96804 Y54.57006
G01 X-35.81196 Y54.55466
G01 X-35.71590 Y54.55466
G01 X-35.55984 Y54.57006
G01 X-35.46563 Y54.58878
G01 X-35.31554 Y54.63432
G01 X-35.22679 Y54.67107
G01 X-35.08849 Y54.74499
G01 X-35.00863 Y54.79835
G01 X-34.88740 Y54.89784
G01 X-34.81948 Y54.96576
G01 X-34.71999 Y55.08700
G01 X-34.66662 Y55.16688
G01 X-34.59268 Y55.30518
G01 X-34.55593 Y55.39393
G01 X-34.51041 Y55.54399
G01 X-34.49393 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.24181 Y53.80630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.24181 Y53.80630
G01 X-36.70800 Y53.80630
G01 X-37.46392 Y54.56226
G01 X-37.46392 Y54.86790
G01 X-37.42740 Y54.89784
G01 X-37.35948 Y54.96576
G01 X-37.25999 Y55.08700
G01 X-37.20662 Y55.16688
G01 X-37.13268 Y55.30518
G01 X-37.09593 Y55.39393
G01 X-37.05041 Y55.54399
G01 X-37.03393 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.03393 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.03393 Y56.05771
G01 X-37.05041 Y56.14061
G01 X-37.09593 Y56.29070
G01 X-37.13268 Y56.37945
G01 X-37.20662 Y56.51775
G01 X-37.25999 Y56.59761
G01 X-37.27891 Y56.62067
G01 X-37.35948 Y56.71885
G01 X-37.42740 Y56.78676
G01 X-37.54863 Y56.88626
G01 X-37.62849 Y56.93962
G01 X-37.76679 Y57.01356
G01 X-37.85554 Y57.05032
G01 X-38.00563 Y57.09583
G01 X-38.09984 Y57.11458
G01 X-38.25590 Y57.12994
G01 X-38.35196 Y57.12994
G01 X-38.50804 Y57.11458
G01 X-38.60225 Y57.09583
G01 X-38.75231 Y57.05032
G01 X-38.84106 Y57.01356
G01 X-38.97939 Y56.93962
G01 X-39.05925 Y56.88626
G01 X-39.18048 Y56.78676
G01 X-39.24840 Y56.71885
G01 X-39.34789 Y56.59761
G01 X-39.40126 Y56.51775
G01 X-39.47517 Y56.37945
G01 X-39.51195 Y56.29070
G01 X-39.55747 Y56.14061
G01 X-39.57390 Y56.05771
G01 X-39.57390 Y55.62670
G01 X-39.55747 Y55.54399
G01 X-39.51195 Y55.39393
G01 X-39.47517 Y55.30518
G01 X-39.40126 Y55.16688
G01 X-39.34789 Y55.08700
G01 X-39.32892 Y55.06388
G01 X-39.24840 Y54.96576
G01 X-39.18048 Y54.89784
G01 X-39.14391 Y54.86785
G01 X-39.14391 Y54.21430
G01 X-39.14154 Y54.16630
G01 X-39.13484 Y54.09800
G01 X-39.11609 Y54.00379
G01 X-39.09618 Y53.93813
G01 X-39.05943 Y53.84941
G01 X-39.02707 Y53.78888
G01 X-38.97370 Y53.70902
G01 X-38.93019 Y53.65599
G01 X-38.89788 Y53.62035
G01 X-37.94084 Y52.66330
G01 X-37.52938 Y52.49287
G01 X-37.49865 Y52.48101
G01 X-37.43002 Y52.45647
G01 X-37.37609 Y52.44006
G01 X-37.30749 Y52.42287
G01 X-37.25953 Y52.41332
G01 X-37.19090 Y52.40313
G01 X-37.14632 Y52.39874
G01 X-37.07772 Y52.39536
G01 X-37.05595 Y52.39483
G01 X-30.83295 Y52.39483
G01 X-30.81116 Y52.39429
G01 X-30.74253 Y52.39091
G01 X-30.69795 Y52.38652
G01 X-30.62932 Y52.37633
G01 X-30.58136 Y52.36678
G01 X-30.51276 Y52.34959
G01 X-30.45883 Y52.33318
G01 X-30.39020 Y52.30864
G01 X-30.35949 Y52.29678
G01 X-29.94796 Y52.12632
G01 X-28.89488 Y52.12632
G01 X-28.15190 Y51.38337
G01 X-28.15190 Y50.92714
G01 X-28.22384 Y50.86813
G01 X-28.29176 Y50.80021
G01 X-28.39747 Y50.67141
G01 X-28.45084 Y50.59153
G01 X-28.52937 Y50.44459
G01 X-28.56194 Y50.36592
G01 X-28.56194 Y49.16062
G01 X-28.59450 Y49.08206
G01 X-28.67304 Y48.93509
G01 X-28.72640 Y48.85523
G01 X-28.83212 Y48.72643
G01 X-28.90004 Y48.65849
G01 X-28.97194 Y48.59951
G01 X-28.97194 Y47.89130
G01 X-28.97430 Y47.84330
G01 X-28.98101 Y47.77500
G01 X-28.99976 Y47.68079
G01 X-29.01967 Y47.61513
G01 X-29.05642 Y47.52638
G01 X-29.08878 Y47.46588
G01 X-29.14215 Y47.38602
G01 X-29.18566 Y47.33299
G01 X-29.21797 Y47.29735
G01 X-30.65594 Y45.85938
G01 X-30.65594 Y45.13185
G01 X-30.64756 Y45.12931
G01 X-30.55881 Y45.09255
G01 X-30.42050 Y45.01864
G01 X-30.34062 Y44.96527
G01 X-30.21939 Y44.86578
G01 X-30.15147 Y44.79786
G01 X-30.05198 Y44.67663
G01 X-29.99861 Y44.59675
G01 X-29.92470 Y44.45844
G01 X-29.88794 Y44.36970
G01 X-29.84240 Y44.21963
G01 X-29.82368 Y44.12542
G01 X-29.80829 Y43.96934
G01 X-29.80829 Y43.87328
G01 X-29.82368 Y43.71722
G01 X-29.84240 Y43.62301
G01 X-29.88794 Y43.47292
G01 X-29.92470 Y43.38418
G01 X-29.99861 Y43.24587
G01 X-30.05198 Y43.16601
G01 X-30.15147 Y43.04478
G01 X-30.21939 Y42.97686
G01 X-30.34062 Y42.87737
G01 X-30.42050 Y42.82400
G01 X-30.55881 Y42.75006
G01 X-30.64756 Y42.71331
G01 X-30.79762 Y42.66779
G01 X-30.88040 Y42.65133
G01 X-32.11141 Y42.65131
G01 X-32.19424 Y42.66779
G01 X-32.28606 Y42.69563
G01 X-32.33229 Y42.75314
G01 X-32.39375 Y42.82355
G01 X-32.47216 Y42.90206
G01 X-32.51136 Y42.93622
G01 X-32.51941 Y42.94333
G01 X-32.56416 Y42.98346
G01 X-32.60386 Y43.01651
G01 X-32.64290 Y43.04669
G01 X-32.67300 Y43.07397
G01 X-32.68433 Y43.08423
G01 X-32.69043 Y43.08984
G01 X-32.73505 Y43.13124
G01 X-32.77389 Y43.16477
G01 X-32.81519 Y43.19802
G01 X-32.82451 Y43.20025
G01 X-32.96536 Y43.21994
G01 X-32.98088 Y43.22055
G01 X-33.00843 Y43.22108
G01 X-34.95679 Y43.22108
G01 X-35.06782 Y43.21229
G01 X-35.12900 Y43.20259
G01 X-35.13482 Y43.20165
G01 X-35.24315 Y43.11915
G01 X-35.25456 Y43.10861
G01 X-35.27444 Y43.08948
G01 X-36.76009 Y41.60386
G01 X-36.83233 Y41.51921
G01 X-36.86875 Y41.46907
G01 X-36.87223 Y41.46424
G01 X-36.89052 Y41.32929
G01 X-36.89113 Y41.31377
G01 X-36.89166 Y41.28621
G01 X-36.89166 Y40.46229
G01 X-36.88287 Y40.35124
G01 X-36.87317 Y40.29005
G01 X-36.86939 Y40.26820
G01 X-36.80213 Y40.18812
G01 X-36.79507 Y40.18085
G01 X-36.78717 Y40.17257
G01 X-36.77325 Y40.15777
G01 X-36.75501 Y40.13760
G01 X-36.68404 Y40.05596
G01 X-36.65519 Y40.01664
G01 X-36.61727 Y39.95924
G01 X-36.58021 Y39.89670
G01 X-36.54338 Y39.82089
G01 X-36.51638 Y39.75751
G01 X-36.50360 Y39.72297
G01 X-36.47142 Y39.60727
G01 X-36.45623 Y39.53996
G01 X-36.45605 Y39.53889
G01 X-36.44198 Y39.38378
G01 X-36.43972 Y39.34933
G01 X-36.44198 Y39.31487
G01 X-36.45605 Y39.15977
G01 X-36.45623 Y39.15868
G01 X-36.47142 Y39.09140
G01 X-36.50360 Y38.97570
G01 X-36.51638 Y38.94113
G01 X-36.54340 Y38.87776
G01 X-36.58026 Y38.80184
G01 X-36.61727 Y38.73940
G01 X-36.65519 Y38.68200
G01 X-36.68404 Y38.64268
G01 X-36.75501 Y38.56105
G01 X-36.80274 Y38.51129
G01 X-36.81221 Y38.50235
G01 X-36.92458 Y38.41253
G01 X-36.94711 Y38.39529
G01 X-36.96179 Y38.38477
G01 X-36.98158 Y38.37372
G01 X-36.99870 Y38.36450
G01 X-37.11968 Y38.29945
G01 X-37.12913 Y38.29445
G01 X-37.18381 Y38.27423
G01 X-37.30939 Y38.23364
G01 X-37.33365 Y38.22795
G01 X-37.40147 Y38.21555
G01 X-37.49694 Y38.20288
G01 X-37.55752 Y38.19991
G01 X-37.62633 Y38.19991
G01 X-37.68691 Y38.20288
G01 X-37.78236 Y38.21555
G01 X-37.85016 Y38.22795
G01 X-37.87446 Y38.23364
G01 X-38.00004 Y38.27423
G01 X-38.05465 Y38.29442
G01 X-38.06418 Y38.29945
G01 X-38.20228 Y38.37372
G01 X-38.22209 Y38.38479
G01 X-38.25927 Y38.41253
G01 X-38.37162 Y38.50235
G01 X-38.38112 Y38.51131
G01 X-38.42885 Y38.56105
G01 X-38.49981 Y38.64268
G01 X-38.52867 Y38.68200
G01 X-38.56565 Y38.73780
G01 X-38.56661 Y38.73946
G01 X-38.63067 Y38.83006
G01 X-38.66110 Y38.86676
G01 X-38.67042 Y38.87824
G01 X-38.71018 Y38.92813
G01 X-38.83253 Y39.05490
G01 X-38.84784 Y39.06826
G01 X-38.84911 Y39.06935
G01 X-38.86420 Y39.14522
G01 X-38.87957 Y39.30128
G01 X-38.87957 Y39.39734
G01 X-38.86420 Y39.55342
G01 X-38.84957 Y39.62701
G01 X-38.84932 Y39.62721
G01 X-38.84932 Y39.62724
G01 X-38.83136 Y39.64344
G01 X-38.72018 Y39.76099
G01 X-38.71213 Y39.77113
G01 X-38.67843 Y39.81098
G01 X-38.66006 Y39.83132
G01 X-38.58800 Y39.92525
G01 X-38.57970 Y39.93813
G01 X-38.56664 Y39.95919
G01 X-38.56484 Y39.96219
G01 X-38.52867 Y40.01664
G01 X-38.49976 Y40.05601
G01 X-38.42885 Y40.13760
G01 X-38.41061 Y40.15777
G01 X-38.38191 Y40.18832
G01 X-38.33573 Y40.24258
G01 X-38.31554 Y40.26874
G01 X-38.30921 Y40.29772
G01 X-38.29278 Y40.43061
G01 X-38.29245 Y40.44204
G01 X-38.29217 Y40.46229
G01 X-38.29217 Y41.76233
G01 X-38.29133 Y41.79675
G01 X-38.28963 Y41.83104
G01 X-38.28628 Y41.85367
G01 X-38.28107 Y41.86470
G01 X-38.24853 Y41.92566
G01 X-38.21218 Y41.98634
G01 X-38.17843 Y42.03691
G01 X-38.13710 Y42.09261
G01 X-38.10141 Y42.13612
G01 X-38.05526 Y42.18702
G01 X-38.03642 Y42.20683
G01 X-35.87742 Y44.36583
G01 X-35.85760 Y44.38468
G01 X-35.80670 Y44.43083
G01 X-35.76319 Y44.46652
G01 X-35.70749 Y44.50785
G01 X-35.65692 Y44.54160
G01 X-35.59624 Y44.57795
G01 X-35.53530 Y44.61046
G01 X-35.52428 Y44.61569
G01 X-35.50165 Y44.61905
G01 X-35.46738 Y44.62072
G01 X-35.43294 Y44.62156
G01 X-33.00843 Y44.62156
G01 X-32.89736 Y44.63038
G01 X-32.83620 Y44.64008
G01 X-32.81476 Y44.64379
G01 X-32.73462 Y44.71105
G01 X-32.72225 Y44.72306
G01 X-32.71095 Y44.73378
G01 X-32.69038 Y44.75285
G01 X-32.68433 Y44.75842
G01 X-32.64290 Y44.79598
G01 X-32.56297 Y44.85773
G01 X-32.50643 Y44.89713
G01 X-32.49736 Y44.90282
G01 X-32.47430 Y44.91486
G01 X-32.44064 Y44.93241
G01 X-32.37006 Y44.97465
G01 X-32.34544 Y44.99136
G01 X-32.30940 Y45.01437
G01 X-32.29223 Y45.02466
G01 X-32.23871 Y45.05979
G01 X-32.20656 Y45.20546
G01 X-32.20107 Y45.25169
G01 X-32.19617 Y45.33462
G01 X-32.19617 Y46.20731
G01 X-32.19533 Y46.24175
G01 X-32.19363 Y46.27607
G01 X-32.18860 Y46.31005
G01 X-32.17516 Y46.37751
G01 X-32.16683 Y46.41086
G01 X-32.15525 Y46.44317
G01 X-32.15370 Y46.44754
G01 X-32.12893 Y46.50678
G01 X-32.11423 Y46.53781
G01 X-32.09657 Y46.56728
G01 X-32.05832 Y46.62455
G01 X-32.05774 Y46.62532
G01 X-32.03788 Y46.65211
G01 X-32.01479 Y46.67759
G01 X-31.99106 Y46.70248
G01 X-31.11682 Y47.57675
G01 X-31.04461 Y47.66136
G01 X-31.00821 Y47.71147
G01 X-30.88916 Y47.94985
G01 X-30.86795 Y48.01515
G01 X-30.86594 Y48.02524
G01 X-30.86546 Y48.02778
G01 X-30.88886 Y48.11503
G01 X-30.93539 Y48.20631
G01 X-30.99988 Y48.28594
G01 X-31.04316 Y48.32920
G01 X-31.12274 Y48.39359
G01 X-31.15591 Y48.41048
G01 X-31.21398 Y48.44007
G01 X-31.31286 Y48.46656
G01 X-31.37328 Y48.47614
G01 X-31.45421 Y48.48216
G01 X-31.47191 Y48.48053
G01 X-31.47191 Y48.59951
G01 X-31.40006 Y48.65849
G01 X-31.33211 Y48.72643
G01 X-31.22642 Y48.85523
G01 X-31.17306 Y48.93509
G01 X-31.09449 Y49.08206
G01 X-31.06193 Y49.16064
G01 X-31.06193 Y50.36595
G01 X-31.02937 Y50.44459
G01 X-30.95083 Y50.59153
G01 X-30.89747 Y50.67141
G01 X-30.88461 Y50.68706
G01 X-31.18088 Y50.98332
G01 X-31.54298 Y50.98332
G01 X-31.61969 Y51.00664
G01 X-31.78631 Y51.04840
G01 X-31.86805 Y51.06468
G01 X-32.03465 Y51.08939
G01 X-32.10917 Y51.09676
G01 X-32.27582 Y51.10494
G01 X-32.34803 Y51.10494
G01 X-32.51466 Y51.09676
G01 X-32.58916 Y51.08939
G01 X-32.75581 Y51.06468
G01 X-32.83754 Y51.04840
G01 X-33.00417 Y51.00664
G01 X-33.08082 Y50.98332
G01 X-33.60066 Y50.98332
G01 X-33.62614 Y50.99757
G01 X-33.88778 Y51.09689
G01 X-33.94900 Y51.10905
G01 X-34.07465 Y51.12279
G01 X-34.08242 Y51.12295
G01 X-34.09616 Y51.12307
G01 X-36.48986 Y51.12307
G01 X-36.60076 Y51.11428
G01 X-36.66195 Y51.10461
G01 X-36.91462 Y51.02023
G01 X-36.97581 Y50.98906
G01 X-36.98478 Y50.98332
G01 X-41.06437 Y50.98332
G01 X-41.11992 Y51.02511
G01 X-41.16166 Y51.05023
G01 X-41.19193 Y51.06768
G01 X-41.22696 Y51.08700
G01 X-41.24990 Y51.10011
G01 X-41.29529 Y51.12704
G01 X-41.35703 Y51.15983
G01 X-41.38662 Y51.17377
G01 X-41.40463 Y51.18258
G01 X-41.41947 Y51.19010
G01 X-41.43666 Y51.19851
G01 X-41.45038 Y51.20499
G01 X-41.47987 Y51.22267
G01 X-41.53714 Y51.26092
G01 X-41.56470 Y51.28139
G01 X-41.59018 Y51.30445
G01 X-41.61507 Y51.32818
G01 X-43.36876 Y53.08184
G01 X-43.45337 Y53.15406
G01 X-43.50346 Y53.19048
G01 X-43.74186 Y53.30950
G01 X-43.80717 Y53.33071
G01 X-43.81814 Y53.33361
G01 X-43.97788 Y53.49335
G01 X-43.99589 Y53.51321
G01 X-44.00394 Y53.53404
G01 X-44.02848 Y53.60265
G01 X-44.05500 Y53.68977
G01 X-44.07217 Y53.75837
G01 X-44.08802 Y53.83790
G01 X-44.09820 Y53.90651
G01 X-44.10562 Y53.98174
G01 X-44.10900 Y54.05035
G01 X-44.10991 Y54.08733
G01 X-44.10991 Y54.92177
G01 X-44.15779 Y55.02301
G01 X-44.18342 Y55.08476
G01 X-44.23955 Y55.24158
G01 X-44.25380 Y55.28844
G01 X-44.29310 Y55.44526
G01 X-44.30049 Y55.48235
G01 X-44.32375 Y55.63917
G01 X-44.32685 Y55.67066
G01 X-44.33455 Y55.82751
G01 X-44.33455 Y55.85715
G01 X-44.32685 Y56.01397
G01 X-44.32375 Y56.04544
G01 X-44.30049 Y56.20229
G01 X-44.29310 Y56.23939
G01 X-44.25380 Y56.39621
G01 X-44.23955 Y56.44308
G01 X-44.18342 Y56.59990
G01 X-44.15779 Y56.66164
G01 X-44.08362 Y56.81846
G01 X-44.03902 Y56.90167
G01 X-44.01169 Y56.94724
G01 X-44.03282 Y56.98872
G01 X-44.11720 Y57.24140
G01 X-44.12688 Y57.30259
G01 X-44.13567 Y57.41348
G01 X-44.13567 Y78.50095
G01 X-44.13650 Y78.53539
G01 X-44.13821 Y78.56963
G01 X-44.14324 Y78.60366
G01 X-44.15667 Y78.67113
G01 X-44.16503 Y78.70445
G01 X-44.17659 Y78.73681
G01 X-44.20293 Y78.80041
G01 X-44.21761 Y78.83140
G01 X-44.23526 Y78.86086
G01 X-44.27354 Y78.91817
G01 X-44.29396 Y78.94570
G01 X-44.31707 Y78.97120
G01 X-44.34077 Y78.99609
G01 X-48.18745 Y82.84277
G01 X-48.24257 Y82.90480
G01 X-48.27137 Y82.94132
G01 X-48.38062 Y83.12982
G01 X-48.40594 Y83.19100
G01 X-48.43934 Y83.30485
G01 X-48.41158 Y83.39032
G01 X-48.36558 Y83.46992
G01 X-48.35572 Y83.47566
G01 X-48.29454 Y83.50683
G01 X-48.04186 Y83.59121
G01 X-47.98067 Y83.60088
G01 X-47.86980 Y83.60967
G01 X-38.08534 Y83.60967
G01 X-37.98076 Y83.60187
G01 X-37.92293 Y83.59324
G01 X-37.68038 Y83.51602
G01 X-37.61919 Y83.48623
G01 X-37.59303 Y83.46992
G01 X-34.74356 Y83.46992
G01 X-34.73447 Y83.47566
G01 X-34.67328 Y83.50683
G01 X-34.42060 Y83.59121
G01 X-34.35941 Y83.60088
G01 X-34.24854 Y83.60967
G01 X-32.34148 Y83.60967
G01 X-32.30483 Y83.60871
G01 X-32.28415 Y83.60764
G01 X-32.13269 Y83.58338
G01 X-32.07150 Y83.56700
G01 X-31.84057 Y83.46106
G01 X-31.82030 Y83.42598
G01 X-31.79541 Y83.37007
G01 X-31.76376 Y83.27264
G01 X-31.75304 Y83.17074
G01 X-31.76376 Y83.06886
G01 X-31.77648 Y83.00901
G01 X-31.79833 Y82.93533
G01 X-31.82027 Y82.88930
G01 X-31.79086 Y82.88930
G01 X-31.74989 Y82.95062
G01 X-31.65040 Y83.07185
G01 X-31.58248 Y83.13977
G01 X-31.46124 Y83.23926
G01 X-31.38139 Y83.29263
G01 X-31.24306 Y83.36657
G01 X-31.15434 Y83.40332
G01 X-31.00425 Y83.44884
G01 X-30.91004 Y83.46759
G01 X-30.88619 Y83.46992
G01 X-30.75340 Y83.47648
G01 X-30.65848 Y83.47648
G01 X-30.52571 Y83.46992
G01 X-29.00593 Y83.46992
G01 X-29.00593 Y83.16977
G01 X-29.04248 Y83.13977
G01 X-29.11040 Y83.07185
G01 X-29.20989 Y82.95062
G01 X-29.26326 Y82.87076
G01 X-29.33719 Y82.73243
G01 X-29.37395 Y82.64371
G01 X-29.41947 Y82.49362
G01 X-29.43592 Y82.41077
G01 X-29.43592 Y81.17973
G01 X-29.41947 Y81.09700
G01 X-29.37395 Y80.94691
G01 X-29.33719 Y80.85819
G01 X-29.26326 Y80.71986
G01 X-29.20989 Y80.64001
G01 X-29.19092 Y80.61689
G01 X-29.11040 Y80.51877
G01 X-29.04248 Y80.45085
G01 X-28.92124 Y80.35136
G01 X-28.84139 Y80.29800
G01 X-28.70306 Y80.22406
G01 X-28.61434 Y80.18730
G01 X-28.46425 Y80.14179
G01 X-28.37004 Y80.12304
G01 X-28.21396 Y80.10767
G01 X-28.11792 Y80.10767
G01 X-27.96184 Y80.12304
G01 X-27.86763 Y80.14179
G01 X-27.71754 Y80.18730
G01 X-27.62882 Y80.22406
G01 X-27.49049 Y80.29800
G01 X-27.41063 Y80.35136
G01 X-27.28940 Y80.45085
G01 X-27.22148 Y80.51877
G01 X-27.12198 Y80.64001
G01 X-27.06862 Y80.71986
G01 X-26.99468 Y80.85819
G01 X-26.95793 Y80.94691
G01 X-26.91241 Y81.09700
G01 X-26.89592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-25.56141 Y80.10932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-25.56141 Y80.10932
G01 X-25.95790 Y79.71280
G01 X-26.01338 Y79.65731
G01 X-26.20294 Y79.65731
G01 X-26.25097 Y79.65494
G01 X-26.28023 Y79.65210
G01 X-26.37444 Y79.63333
G01 X-26.40258 Y79.62482
G01 X-26.49133 Y79.58804
G01 X-26.51726 Y79.57417
G01 X-26.59712 Y79.52081
G01 X-26.61985 Y79.50216
G01 X-26.68777 Y79.43424
G01 X-26.70644 Y79.41154
G01 X-26.75981 Y79.33163
G01 X-26.77365 Y79.30569
G01 X-26.81043 Y79.21697
G01 X-26.81896 Y79.18883
G01 X-26.83771 Y79.09459
G01 X-26.84058 Y79.06533
G01 X-26.84294 Y79.01733
G01 X-26.84294 Y78.82777
G01 X-28.25287 Y77.41781
G01 X-28.25820 Y77.43069
G01 X-28.27207 Y77.45662
G01 X-28.32544 Y77.53651
G01 X-28.34411 Y77.55924
G01 X-28.41203 Y77.62716
G01 X-28.43476 Y77.64580
G01 X-28.51462 Y77.69919
G01 X-28.54055 Y77.71304
G01 X-28.62930 Y77.74979
G01 X-28.65744 Y77.75835
G01 X-28.75165 Y77.77707
G01 X-28.78091 Y77.77997
G01 X-28.82894 Y77.78230
G01 X-29.08894 Y77.78230
G01 X-29.12894 Y77.74230
G01 X-29.16895 Y77.70034
G01 X-29.19562 Y77.67092
G01 X-29.25282 Y77.60151
G01 X-29.27463 Y77.57212
G01 X-29.31212 Y77.51616
G01 X-29.32975 Y77.48677
G01 X-29.35462 Y77.44039
G01 X-29.36851 Y77.41098
G01 X-29.38497 Y77.37138
G01 X-29.39549 Y77.34197
G01 X-29.40605 Y77.30717
G01 X-29.41345 Y77.27776
G01 X-29.41977 Y77.24593
G01 X-29.42414 Y77.21654
G01 X-29.42711 Y77.18642
G01 X-29.42856 Y77.15701
G01 X-29.42891 Y77.14232
G01 X-29.42891 Y76.77004
G01 X-29.43191 Y76.75810
G01 X-29.43755 Y76.72983
G01 X-29.44771 Y76.66122
G01 X-29.45022 Y76.63575
G01 X-29.45360 Y76.56712
G01 X-29.45360 Y76.54253
G01 X-29.45022 Y76.47392
G01 X-29.44771 Y76.44847
G01 X-29.43755 Y76.37987
G01 X-29.43191 Y76.35160
G01 X-29.42891 Y76.33966
G01 X-29.42891 Y75.96735
G01 X-29.42856 Y75.95266
G01 X-29.42711 Y75.92325
G01 X-29.42414 Y75.89315
G01 X-29.41980 Y75.86374
G01 X-29.41345 Y75.83189
G01 X-29.40605 Y75.80247
G01 X-29.39549 Y75.76768
G01 X-29.38497 Y75.73826
G01 X-29.36851 Y75.69866
G01 X-29.35462 Y75.66925
G01 X-29.32965 Y75.62269
G01 X-29.31202 Y75.59331
G01 X-29.27463 Y75.53755
G01 X-29.25282 Y75.50816
G01 X-29.19589 Y75.43908
G01 X-29.16928 Y75.40966
G01 X-29.12894 Y75.36735
G01 X-29.12864 Y75.36704
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.43592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.43592 Y73.55973
G01 X-29.45241 Y73.47700
G01 X-29.49793 Y73.32691
G01 X-29.53468 Y73.23819
G01 X-29.60862 Y73.09986
G01 X-29.66198 Y73.02001
G01 X-29.76148 Y72.89877
G01 X-29.82940 Y72.83085
G01 X-29.95063 Y72.73136
G01 X-29.97494 Y72.71513
G01 X-29.97494 Y71.95930
G01 X-29.96493 Y71.95930
G01 X-29.86935 Y71.94990
G01 X-29.77743 Y71.92202
G01 X-29.69272 Y71.87673
G01 X-29.61845 Y71.81579
G01 X-29.61146 Y71.80726
G01 X-29.55751 Y71.74155
G01 X-29.51223 Y71.65684
G01 X-29.48436 Y71.56492
G01 X-29.47494 Y71.46931
G01 X-29.47491 Y71.20825
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-27.00492 Y71.03469 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-27.00492 Y71.03469
G01 X-27.02074 Y71.08684
G01 X-27.05749 Y71.17559
G01 X-27.13606 Y71.32252
G01 X-27.18942 Y71.40241
G01 X-27.29511 Y71.53121
G01 X-27.36306 Y71.59913
G01 X-27.43494 Y71.65813
G01 X-27.43494 Y72.71513
G01 X-27.41063 Y72.73136
G01 X-27.28940 Y72.83085
G01 X-27.22148 Y72.89877
G01 X-27.12198 Y73.02001
G01 X-27.06862 Y73.09986
G01 X-26.99468 Y73.23819
G01 X-26.95793 Y73.32691
G01 X-26.91241 Y73.47700
G01 X-26.89592 Y73.55973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.46492 Y71.03469 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.46492 Y71.03469
G01 X-24.48074 Y71.08684
G01 X-24.51749 Y71.17559
G01 X-24.59606 Y71.32252
G01 X-24.64942 Y71.40241
G01 X-24.75511 Y71.53121
G01 X-24.82306 Y71.59913
G01 X-24.89494 Y71.65813
G01 X-24.89494 Y72.71513
G01 X-24.87063 Y72.73136
G01 X-24.74940 Y72.83085
G01 X-24.68148 Y72.89877
G01 X-24.58198 Y73.02001
G01 X-24.52862 Y73.09986
G01 X-24.45468 Y73.23819
G01 X-24.41793 Y73.32691
G01 X-24.37241 Y73.47700
G01 X-24.35592 Y73.55973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.35592 Y74.79077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.35592 Y74.79077
G01 X-24.37241 Y74.87362
G01 X-24.41793 Y75.02371
G01 X-24.45468 Y75.11243
G01 X-24.52862 Y75.25076
G01 X-24.58198 Y75.33062
G01 X-24.64477 Y75.40717
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.47800 Y75.55833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.47800 Y75.55833
G01 X-24.47868 Y75.53946
G01 X-24.47297 Y75.53036
G01 X-24.40162 Y75.45683
G01 X-24.35465 Y75.41761
G01 X-24.26964 Y75.36057
G01 X-24.17462 Y75.32241
G01 X-24.13827 Y75.31609
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.36550 Y76.93054 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.36550 Y76.93054
G01 X-24.30487 Y77.06272
G01 X-24.25659 Y77.09780
G01 X-24.16296 Y77.13948
G01 X-24.10477 Y77.15838
G01 X-24.03004 Y77.17631
G01 X-23.95344 Y77.18233
G01 X-23.94891 Y77.18233
G01 X-23.91689 Y77.18454
G01 X-23.79227 Y77.21385
G01 X-23.68039 Y77.26325
G01 X-23.57950 Y77.33237
G01 X-23.49298 Y77.41888
G01 X-23.42387 Y77.51979
G01 X-23.39293 Y77.58982
G01 X-23.41734 Y77.58982
G01 X-23.43220 Y77.55393
G01 X-23.44607 Y77.52800
G01 X-23.49944 Y77.44812
G01 X-23.51811 Y77.42538
G01 X-23.58603 Y77.35746
G01 X-23.60876 Y77.33882
G01 X-23.68862 Y77.28545
G01 X-23.71455 Y77.27159
G01 X-23.80330 Y77.23483
G01 X-23.83144 Y77.22630
G01 X-23.92565 Y77.20755
G01 X-23.95491 Y77.20468
G01 X-24.00294 Y77.20232
G01 X-24.30294 Y77.20232
G01 X-24.31678 Y77.20301
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.98303 Y80.73033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.98303 Y80.73033
G01 X-21.91468 Y80.85819
G01 X-21.87793 Y80.94691
G01 X-21.83241 Y81.09700
G01 X-21.81592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.64882 Y80.73033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.64882 Y80.73033
G01 X-21.98303 Y80.73033
G01 X-21.99484 Y80.72324
G01 X-22.08468 Y80.67508
G01 X-22.24153 Y80.60089
G01 X-22.30940 Y80.57272
G01 X-22.46622 Y80.51659
G01 X-22.51879 Y80.50061
G01 X-22.67561 Y80.46134
G01 X-22.71808 Y80.45286
G01 X-22.87493 Y80.42959
G01 X-22.91163 Y80.42599
G01 X-23.06847 Y80.41826
G01 X-23.10340 Y80.41826
G01 X-23.26022 Y80.42599
G01 X-23.29692 Y80.42959
G01 X-23.45377 Y80.45286
G01 X-23.49624 Y80.46134
G01 X-23.65306 Y80.50061
G01 X-23.70563 Y80.51659
G01 X-23.86245 Y80.57272
G01 X-23.93032 Y80.60089
G01 X-24.08717 Y80.67508
G01 X-24.17701 Y80.72324
G01 X-24.18882 Y80.73033
G01 X-24.25719 Y80.85819
G01 X-24.29395 Y80.94691
G01 X-24.33947 Y81.09700
G01 X-24.35592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.18882 Y80.73033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.18882 Y80.73033
G01 X-24.52303 Y80.73033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.35592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.35592 Y82.41077
G01 X-24.37241 Y82.49362
G01 X-24.40027 Y82.58552
G01 X-24.40073 Y82.58587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-24.31109 Y82.58587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-24.31109 Y82.58587
G01 X-24.32534 Y82.58440
G01 X-24.38653 Y82.58440
G01 X-24.40073 Y82.58587
G01 X-24.40076 Y82.58590
G01 X-24.45768 Y82.63162
G01 X-24.52814 Y82.69316
G01 X-24.60660 Y82.77150
G01 X-24.64081 Y82.81077
G01 X-24.64787 Y82.81877
G01 X-24.68805 Y82.86357
G01 X-24.72107 Y82.90322
G01 X-24.75128 Y82.94231
G01 X-24.78884 Y82.98374
G01 X-24.83751 Y83.03241
G01 X-24.87894 Y83.06995
G01 X-24.95890 Y83.13172
G01 X-25.01546 Y83.17114
G01 X-25.02448 Y83.17681
G01 X-25.15409 Y83.24445
G01 X-25.18508 Y83.25966
G01 X-25.21775 Y83.27081
G01 X-25.35722 Y83.31463
G01 X-25.36763 Y83.31701
G01 X-25.43542 Y83.32910
G01 X-25.53565 Y83.34198
G01 X-25.59148 Y83.34473
G01 X-25.66039 Y83.34473
G01 X-25.71620 Y83.34198
G01 X-25.81642 Y83.32910
G01 X-25.88422 Y83.31701
G01 X-25.89463 Y83.31463
G01 X-26.03410 Y83.27081
G01 X-26.06677 Y83.25966
G01 X-26.09775 Y83.24445
G01 X-26.22737 Y83.17681
G01 X-26.23639 Y83.17114
G01 X-26.29295 Y83.13172
G01 X-26.37291 Y83.06995
G01 X-26.41434 Y83.03241
G01 X-26.46301 Y82.98374
G01 X-26.50057 Y82.94231
G01 X-26.53077 Y82.90322
G01 X-26.56379 Y82.86357
G01 X-26.60398 Y82.81877
G01 X-26.61104 Y82.81077
G01 X-26.64525 Y82.77150
G01 X-26.72371 Y82.69316
G01 X-26.79417 Y82.63162
G01 X-26.85109 Y82.58590
G01 X-26.85109 Y82.58587
G01 X-26.85160 Y82.58549
G01 X-26.87947 Y82.49362
G01 X-26.89592 Y82.41077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-26.85109 Y82.58587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-26.85109 Y82.58587
G01 X-26.86534 Y82.58440
G01 X-26.92653 Y82.58440
G01 X-26.94073 Y82.58587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.43592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.43592 Y82.41077
G01 X-29.45241 Y82.49362
G01 X-29.49793 Y82.64371
G01 X-29.53468 Y82.73243
G01 X-29.60862 Y82.87076
G01 X-29.66198 Y82.95062
G01 X-29.76148 Y83.07185
G01 X-29.82940 Y83.13977
G01 X-29.95063 Y83.23926
G01 X-30.03049 Y83.29263
G01 X-30.16882 Y83.36657
G01 X-30.25754 Y83.40332
G01 X-30.40763 Y83.44884
G01 X-30.50184 Y83.46759
G01 X-30.52571 Y83.46992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.88619 Y83.46992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.88619 Y83.46992
G01 X-31.85985 Y83.46992
G01 X-32.07150 Y83.56700
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-29.43592 Y81.17973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-29.43592 Y81.17973
G01 X-29.45241 Y81.09700
G01 X-29.49793 Y80.94691
G01 X-29.53468 Y80.85819
G01 X-29.60862 Y80.71986
G01 X-29.66198 Y80.64001
G01 X-29.76148 Y80.51877
G01 X-29.82940 Y80.45085
G01 X-29.95063 Y80.35136
G01 X-30.03049 Y80.29800
G01 X-30.16882 Y80.22406
G01 X-30.25754 Y80.18730
G01 X-30.40763 Y80.14179
G01 X-30.50184 Y80.12304
G01 X-30.65792 Y80.10767
G01 X-30.75396 Y80.10767
G01 X-30.91004 Y80.12304
G01 X-31.00425 Y80.14179
G01 X-31.13259 Y80.18072
G01 X-31.15139 Y80.16190
G01 X-31.12792 Y80.15217
G01 X-30.96203 Y80.10775
G01 X-30.82002 Y80.08908
G01 X-30.81006 Y80.08763
G01 X-30.80857 Y80.08740
G01 X-30.73498 Y80.07028
G01 X-30.66488 Y80.04206
G01 X-30.61004 Y80.01491
G01 X-30.52345 Y79.96000
G01 X-30.45017 Y79.88829
G01 X-30.44877 Y79.88621
G01 X-30.39343 Y79.80292
G01 X-30.36508 Y79.74869
G01 X-30.32736 Y79.65350
G01 X-30.31957 Y79.60747
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.68870 Y78.07036 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.68870 Y78.07036
G01 X-30.76892 Y77.90714
G01 X-30.76889 Y77.90712
G01 X-30.77989 Y77.88479
G01 X-30.86889 Y77.84517
G01 X-30.92708 Y77.82630
G01 X-31.00181 Y77.80834
G01 X-31.07844 Y77.80232
G01 X-31.08294 Y77.80232
G01 X-31.11497 Y77.80011
G01 X-31.23958 Y77.77080
G01 X-31.35147 Y77.72139
G01 X-31.45235 Y77.65228
G01 X-31.53884 Y77.56577
G01 X-31.62396 Y77.44154
G01 X-31.62835 Y77.43341
G01 X-31.67339 Y77.37385
G01 X-31.71316 Y77.32884
G01 X-31.78791 Y77.26013
G01 X-31.87519 Y77.20831
G01 X-31.97128 Y77.17560
G01 X-32.03092 Y77.16198
G01 X-32.13259 Y77.14974
G01 X-32.23457 Y77.15891
G01 X-32.33241 Y77.18906
G01 X-32.38867 Y77.21309
G01 X-32.47818 Y77.26297
G01 X-32.55535 Y77.33036
G01 X-32.61684 Y77.41233
G01 X-32.64824 Y77.46485
G01 X-32.68237 Y77.53376
G01 X-32.68497 Y77.54204
G01 X-32.76985 Y77.75830
G01 X-32.86802 Y77.92838
G01 X-32.99043 Y78.08187
G01 X-33.11341 Y78.19597
G01 X-33.11341 Y78.16274
G01 X-33.07689 Y78.13277
G01 X-33.00897 Y78.06485
G01 X-32.90948 Y77.94362
G01 X-32.85611 Y77.86376
G01 X-32.78220 Y77.72543
G01 X-32.74544 Y77.63671
G01 X-32.69990 Y77.48662
G01 X-32.68118 Y77.39241
G01 X-32.66579 Y77.23633
G01 X-32.66579 Y77.14029
G01 X-32.68118 Y76.98421
G01 X-32.69990 Y76.89000
G01 X-32.74544 Y76.73994
G01 X-32.77592 Y76.66630
G01 X-32.73043 Y76.66630
G01 X-32.71316 Y76.68815
G01 X-32.64610 Y76.74692
G01 X-32.59662 Y76.78289
G01 X-32.50790 Y76.83415
G01 X-32.41044 Y76.86582
G01 X-32.30854 Y76.87654
G01 X-32.24735 Y76.87654
G01 X-32.14547 Y76.86582
G01 X-32.04804 Y76.83417
G01 X-31.95934 Y76.78297
G01 X-31.90983 Y76.74700
G01 X-31.89134 Y76.73036
G01 X-31.66894 Y76.95276
G01 X-31.66894 Y77.14232
G01 X-31.66658 Y77.19033
G01 X-31.66371 Y77.21962
G01 X-31.64496 Y77.31383
G01 X-31.63643 Y77.34194
G01 X-31.59965 Y77.43069
G01 X-31.58581 Y77.45662
G01 X-31.53244 Y77.53651
G01 X-31.51377 Y77.55924
G01 X-31.44585 Y77.62716
G01 X-31.42312 Y77.64580
G01 X-31.34326 Y77.69919
G01 X-31.31733 Y77.71304
G01 X-31.22858 Y77.74979
G01 X-31.20044 Y77.75835
G01 X-31.10623 Y77.77707
G01 X-31.07697 Y77.77997
G01 X-31.05116 Y77.78121
G01 X-31.02894 Y77.78230
G01 X-30.76889 Y77.78230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-31.98591 Y74.69869 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-31.98591 Y74.69869
G01 X-31.98619 Y74.69839
G01 X-31.99358 Y74.62333
G01 X-31.99594 Y74.57532
G01 X-31.99594 Y74.19892
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.94775 Y72.94833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.94775 Y72.94833
G01 X-32.97900 Y72.94833
G01 X-33.00897 Y72.98485
G01 X-33.07689 Y73.05277
G01 X-33.11341 Y73.08274
G01 X-33.11341 Y73.28170
G01 X-33.10854 Y73.25237
G01 X-33.09225 Y73.19339
G01 X-33.06129 Y73.11096
G01 X-33.01608 Y73.03540
G01 X-33.01085 Y73.02821
G01 X-32.99779 Y73.01107
G01 X-32.94775 Y72.94833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-32.15492 Y71.31125 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-32.15492 Y71.31125
G01 X-32.21326 Y71.29227
G01 X-32.28799 Y71.27434
G01 X-32.36462 Y71.26832
G01 X-32.97897 Y71.26832
G01 X-33.00897 Y71.23177
G01 X-33.07689 Y71.16385
G01 X-33.11341 Y71.13388
G01 X-33.11341 Y70.54274
G01 X-33.07689 Y70.51277
G01 X-33.00897 Y70.44485
G01 X-32.90948 Y70.32362
G01 X-32.85611 Y70.24376
G01 X-32.78220 Y70.10543
G01 X-32.74544 Y70.01671
G01 X-32.69990 Y69.86662
G01 X-32.68118 Y69.77241
G01 X-32.66579 Y69.61633
G01 X-32.66579 Y69.52029
G01 X-32.68118 Y69.36421
G01 X-32.69990 Y69.27000
G01 X-32.74544 Y69.11994
G01 X-32.78220 Y69.03119
G01 X-32.85611 Y68.89286
G01 X-32.90948 Y68.81300
G01 X-33.00897 Y68.69177
G01 X-33.07689 Y68.62385
G01 X-33.19812 Y68.52436
G01 X-33.27800 Y68.47099
G01 X-33.41631 Y68.39708
G01 X-33.50506 Y68.36030
G01 X-33.65512 Y68.31478
G01 X-33.74933 Y68.29604
G01 X-33.90541 Y68.28067
G01 X-34.00147 Y68.28067
G01 X-34.15753 Y68.29604
G01 X-34.25174 Y68.31478
G01 X-34.30411 Y68.33066
G01 X-34.40183 Y68.36030
G01 X-34.49058 Y68.39708
G01 X-34.62888 Y68.47099
G01 X-34.70874 Y68.52436
G01 X-34.82997 Y68.62385
G01 X-34.89789 Y68.69177
G01 X-34.99738 Y68.81300
G01 X-35.05075 Y68.89286
G01 X-35.12469 Y69.03119
G01 X-35.16144 Y69.11994
G01 X-35.20696 Y69.27000
G01 X-35.21910 Y69.33096
G01 X-35.22570 Y69.36421
G01 X-35.24107 Y69.52029
G01 X-35.24107 Y69.61633
G01 X-35.22570 Y69.77241
G01 X-35.20696 Y69.86662
G01 X-35.16144 Y70.01671
G01 X-35.12469 Y70.10543
G01 X-35.05075 Y70.24376
G01 X-34.99738 Y70.32362
G01 X-34.89789 Y70.44485
G01 X-34.82997 Y70.51277
G01 X-34.79342 Y70.54277
G01 X-34.79342 Y71.13385
G01 X-34.82997 Y71.16385
G01 X-34.89789 Y71.23177
G01 X-34.99738 Y71.35300
G01 X-35.05075 Y71.43286
G01 X-35.12469 Y71.57119
G01 X-35.16144 Y71.65994
G01 X-35.20696 Y71.81000
G01 X-35.21910 Y71.87096
G01 X-35.22570 Y71.90421
G01 X-35.24107 Y72.06029
G01 X-35.24107 Y72.15633
G01 X-35.22570 Y72.31241
G01 X-35.20696 Y72.40662
G01 X-35.16144 Y72.55671
G01 X-35.12469 Y72.64543
G01 X-35.05075 Y72.78376
G01 X-34.99738 Y72.86362
G01 X-34.89789 Y72.98485
G01 X-34.82997 Y73.05277
G01 X-34.79342 Y73.08277
G01 X-34.79342 Y73.67385
G01 X-34.82997 Y73.70385
G01 X-34.89789 Y73.77177
G01 X-34.99738 Y73.89300
G01 X-35.05075 Y73.97286
G01 X-35.12469 Y74.11119
G01 X-35.16144 Y74.19994
G01 X-35.20696 Y74.35000
G01 X-35.21910 Y74.41096
G01 X-35.22570 Y74.44421
G01 X-35.24107 Y74.60029
G01 X-35.24107 Y74.69633
G01 X-35.22570 Y74.85241
G01 X-35.20696 Y74.94662
G01 X-35.16144 Y75.09671
G01 X-35.12469 Y75.18543
G01 X-35.05075 Y75.32376
G01 X-34.99738 Y75.40362
G01 X-34.89789 Y75.52485
G01 X-34.82997 Y75.59277
G01 X-34.79342 Y75.62277
G01 X-34.79342 Y76.21385
G01 X-34.82997 Y76.24385
G01 X-34.89789 Y76.31177
G01 X-34.92789 Y76.34832
G01 X-35.10005 Y76.34832
G01 X-35.10071 Y76.33506
G01 X-35.11026 Y76.27461
G01 X-35.13678 Y76.17555
G01 X-35.18333 Y76.08419
G01 X-35.24788 Y76.00448
G01 X-35.29116 Y75.96122
G01 X-35.37074 Y75.89684
G01 X-35.46197 Y75.85035
G01 X-35.56086 Y75.82386
G01 X-35.62128 Y75.81429
G01 X-35.72362 Y75.80893
G01 X-35.72639 Y75.80936
G01 X-35.72880 Y75.81142
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.79342 Y78.16277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.79342 Y78.16277
G01 X-34.82997 Y78.13277
G01 X-34.89789 Y78.06485
G01 X-34.92789 Y78.02835
G01 X-34.95910 Y78.02835
G01 X-34.91641 Y78.08187
G01 X-34.79342 Y78.19597
G01 X-34.79342 Y78.16277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.80693 Y81.16307 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.80693 Y81.16307
G01 X-34.80693 Y81.20932
G01 X-34.82695 Y81.20932
G01 X-34.82695 Y81.19931
G01 X-34.83635 Y81.10371
G01 X-34.86423 Y81.01179
G01 X-34.90952 Y80.92708
G01 X-34.97046 Y80.85283
G01 X-35.04470 Y80.79190
G01 X-35.12941 Y80.74661
G01 X-35.22133 Y80.71872
G01 X-35.31694 Y80.70932
G01 X-35.32692 Y80.70932
G01 X-35.32692 Y80.68933
G01 X-35.28067 Y80.68933
G01 X-35.22949 Y80.69388
G01 X-35.12674 Y80.72327
G01 X-35.03485 Y80.77127
G01 X-34.95443 Y80.83686
G01 X-34.88887 Y80.91722
G01 X-34.84087 Y81.00914
G01 X-34.81148 Y81.11189
G01 X-34.80693 Y81.16307
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.73447 Y83.47566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.73447 Y83.47566
G01 X-34.74491 Y83.46906
G01 X-34.78915 Y83.39293
G01 X-34.82075 Y83.29850
G01 X-34.83261 Y83.19962
G01 X-34.83363 Y83.14178
G01 X-34.83289 Y83.12865
G01 X-34.82954 Y83.06947
G01 X-34.81483 Y82.99852
G01 X-34.81148 Y82.98681
G01 X-34.80693 Y82.93558
G01 X-34.80693 Y82.88933
G01 X-34.82695 Y82.88933
G01 X-34.82695 Y82.89931
G01 X-34.83635 Y82.99492
G01 X-34.86423 Y83.08684
G01 X-34.90952 Y83.17155
G01 X-34.97046 Y83.24579
G01 X-35.04470 Y83.30673
G01 X-35.12941 Y83.35202
G01 X-35.22133 Y83.37990
G01 X-35.31694 Y83.38930
G01 X-37.01694 Y83.38930
G01 X-37.11254 Y83.37990
G01 X-37.20446 Y83.35202
G01 X-37.28917 Y83.30673
G01 X-37.36342 Y83.24579
G01 X-37.42435 Y83.17155
G01 X-37.46964 Y83.08684
G01 X-37.49753 Y82.99492
G01 X-37.50693 Y82.89931
G01 X-37.50693 Y82.88933
G01 X-37.52692 Y82.88933
G01 X-37.52692 Y82.93558
G01 X-37.52237 Y82.98681
G01 X-37.51902 Y82.99852
G01 X-37.50378 Y83.07376
G01 X-37.50045 Y83.15047
G01 X-37.50261 Y83.21163
G01 X-37.51691 Y83.31310
G01 X-37.55201 Y83.40939
G01 X-37.58788 Y83.46670
G01 X-37.59303 Y83.46992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.00693 Y80.68933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.00693 Y80.68933
G01 X-37.05318 Y80.68933
G01 X-37.10436 Y80.69388
G01 X-37.20711 Y80.72327
G01 X-37.29903 Y80.77127
G01 X-37.37939 Y80.83683
G01 X-37.44498 Y80.91725
G01 X-37.49298 Y81.00914
G01 X-37.52237 Y81.11189
G01 X-37.52692 Y81.16307
G01 X-37.52692 Y81.20932
G01 X-37.50693 Y81.20932
G01 X-37.50693 Y81.19931
G01 X-37.49753 Y81.10371
G01 X-37.46964 Y81.01179
G01 X-37.42435 Y80.92708
G01 X-37.36342 Y80.85283
G01 X-37.28917 Y80.79190
G01 X-37.20446 Y80.74661
G01 X-37.11254 Y80.71872
G01 X-37.01694 Y80.70932
G01 X-37.00693 Y80.70932
G01 X-37.00693 Y80.68933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.35787 Y75.91832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.35787 Y75.91832
G01 X-41.27512 Y75.90184
G01 X-41.12506 Y75.85632
G01 X-41.03631 Y75.81957
G01 X-40.89800 Y75.74563
G01 X-40.81812 Y75.69226
G01 X-40.69689 Y75.59277
G01 X-40.62897 Y75.52485
G01 X-40.59902 Y75.48833
G01 X-39.17995 Y75.48833
G01 X-39.13192 Y75.48597
G01 X-39.06362 Y75.47926
G01 X-38.96941 Y75.46051
G01 X-38.90375 Y75.44060
G01 X-38.81500 Y75.40382
G01 X-38.75450 Y75.37149
G01 X-38.67464 Y75.31812
G01 X-38.62158 Y75.27459
G01 X-38.58597 Y75.24230
G01 X-37.38790 Y74.04424
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-38.53090 Y71.63124 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-38.53090 Y71.63124
G01 X-39.60197 Y72.70230
G01 X-39.63758 Y72.73459
G01 X-39.69064 Y72.77812
G01 X-39.77050 Y72.83149
G01 X-39.83100 Y72.86382
G01 X-39.91975 Y72.90060
G01 X-39.98541 Y72.92051
G01 X-40.07962 Y72.93926
G01 X-40.14792 Y72.94597
G01 X-40.19595 Y72.94833
G01 X-40.59902 Y72.94833
G01 X-40.62897 Y72.98485
G01 X-40.69689 Y73.05277
G01 X-40.81812 Y73.15226
G01 X-40.89800 Y73.20563
G01 X-41.03631 Y73.27957
G01 X-41.12506 Y73.31632
G01 X-41.27512 Y73.36184
G01 X-41.35787 Y73.37832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.78888 Y75.91832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.78888 Y75.91832
G01 X-41.87174 Y75.90184
G01 X-41.96326 Y75.87408
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.78888 Y73.37832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.78888 Y73.37832
G01 X-41.87174 Y73.36184
G01 X-41.96326 Y73.33408
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-41.96282 Y73.42242 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-41.96282 Y73.42242
G01 X-41.87174 Y73.39478
G01 X-41.78888 Y73.37832
G01 X-41.35787 Y73.37832
G01 X-41.27512 Y73.39478
G01 X-41.12506 Y73.44030
G01 X-41.03631 Y73.47708
G01 X-40.89800 Y73.55099
G01 X-40.81812 Y73.60436
G01 X-40.79501 Y73.62333
G01 X-40.69689 Y73.70385
G01 X-40.62897 Y73.77177
G01 X-40.59897 Y73.80835
G01 X-39.52788 Y73.80835
G01 X-38.53093 Y72.81137
G01 X-38.53090 Y71.63124
G01 X-38.28607 Y71.04015
G01 X-38.27698 Y71.01658
G01 X-38.25242 Y70.94798
G01 X-38.24017 Y70.90769
G01 X-38.22300 Y70.83909
G01 X-38.21602 Y70.80409
G01 X-38.20583 Y70.73548
G01 X-38.20268 Y70.70348
G01 X-38.19931 Y70.63484
G01 X-38.19892 Y70.61930
G01 X-38.19892 Y68.30531
G01 X-38.19854 Y68.28979
G01 X-38.19517 Y68.22118
G01 X-38.19202 Y68.18918
G01 X-38.18183 Y68.12058
G01 X-38.17485 Y68.08557
G01 X-38.15767 Y68.01697
G01 X-38.14543 Y67.97668
G01 X-38.12087 Y67.90808
G01 X-38.11175 Y67.88451
G01 X-37.86690 Y67.29335
G01 X-35.31811 Y64.74458
G01 X-34.77094 Y64.19742
G01 X-34.77559 Y64.15035
G01 X-34.77559 Y64.05429
G01 X-34.76020 Y63.89821
G01 X-34.74148 Y63.80400
G01 X-34.69593 Y63.65393
G01 X-34.65918 Y63.56519
G01 X-34.58527 Y63.42688
G01 X-34.53188 Y63.34700
G01 X-34.44595 Y63.24233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-34.16693 Y65.96932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-34.16693 Y65.96932
G01 X-33.58298 Y65.38533
G01 X-33.53597 Y65.38995
G01 X-33.43990 Y65.38995
G01 X-33.28385 Y65.37458
G01 X-33.18964 Y65.35584
G01 X-33.03955 Y65.31032
G01 X-32.98758 Y65.28881
G01 X-32.95080 Y65.27357
G01 X-32.81250 Y65.19963
G01 X-32.73262 Y65.14626
G01 X-32.61141 Y65.04677
G01 X-32.54349 Y64.97885
G01 X-32.44400 Y64.85761
G01 X-32.39063 Y64.77776
G01 X-32.31669 Y64.63945
G01 X-32.27994 Y64.55071
G01 X-32.23442 Y64.40062
G01 X-32.21568 Y64.30641
G01 X-32.20031 Y64.15035
G01 X-32.20031 Y64.05429
G01 X-32.21568 Y63.89821
G01 X-32.23442 Y63.80400
G01 X-32.27994 Y63.65393
G01 X-32.28019 Y63.65327
G01 X-32.31669 Y63.56519
G01 X-32.39063 Y63.42688
G01 X-32.44400 Y63.34700
G01 X-32.52987 Y63.24235
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-30.88995 Y63.24233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-30.88995 Y63.24233
G01 X-30.86851 Y63.23219
G01 X-30.77824 Y63.19470
G01 X-30.62139 Y63.13859
G01 X-30.54794 Y63.11624
G01 X-30.39112 Y63.07695
G01 X-30.32868 Y63.06450
G01 X-30.17186 Y63.04124
G01 X-30.11578 Y63.03570
G01 X-29.95894 Y63.02800
G01 X-29.90491 Y63.02800
G01 X-29.74807 Y63.03570
G01 X-29.69198 Y63.04124
G01 X-29.53516 Y63.06450
G01 X-29.47273 Y63.07695
G01 X-29.31591 Y63.11624
G01 X-29.24245 Y63.13859
G01 X-29.10783 Y63.18675
G01 X-29.09135 Y63.20169
G01 X-29.03130 Y63.26173
G01 X-28.92587 Y63.37806
G01 X-28.87022 Y63.44591
G01 X-28.77575 Y63.57326
G01 X-28.72719 Y63.64601
G01 X-28.72394 Y63.65393
G01 X-28.67842 Y63.80400
G01 X-28.65968 Y63.89821
G01 X-28.64431 Y64.05429
G01 X-28.64431 Y64.15035
G01 X-28.65968 Y64.30641
G01 X-28.67842 Y64.40062
G01 X-28.72394 Y64.55071
G01 X-28.76069 Y64.63945
G01 X-28.83463 Y64.77776
G01 X-28.88800 Y64.85761
G01 X-28.95927 Y64.94446
G01 X-28.98749 Y64.97885
G01 X-29.05541 Y65.04677
G01 X-29.17662 Y65.14626
G01 X-29.25650 Y65.19963
G01 X-29.39480 Y65.27357
G01 X-29.48355 Y65.31032
G01 X-29.63364 Y65.35584
G01 X-29.72785 Y65.37458
G01 X-29.88390 Y65.38995
G01 X-29.97997 Y65.38995
G01 X-30.02698 Y65.38533
G01 X-32.04496 Y67.40328
G01 X-32.08060 Y67.43559
G01 X-32.13363 Y67.47910
G01 X-32.21349 Y67.53246
G01 X-32.27402 Y67.56482
G01 X-32.36274 Y67.60158
G01 X-32.42840 Y67.62149
G01 X-32.52261 Y67.64024
G01 X-32.59091 Y67.64694
G01 X-32.63894 Y67.64930
G01 X-34.29500 Y67.64930
G01 X-35.70795 Y69.06225
G01 X-35.70795 Y75.63580
G01 X-35.71031 Y75.68383
G01 X-35.71701 Y75.75213
G01 X-35.72880 Y75.81142
G01 X-35.72883 Y75.81144
G01 X-35.76083 Y75.83872
G01 X-35.81940 Y75.89264
G01 X-35.87599 Y75.94903
G01 X-35.88062 Y75.95360
G01 X-35.92176 Y75.99397
G01 X-35.93182 Y76.00400
G01 X-35.98247 Y76.05553
G01 X-36.00213 Y76.07639
G01 X-36.02905 Y76.10608
G01 X-36.05278 Y76.13097
G01 X-37.60528 Y77.68350
G01 X-37.63017 Y77.70720
G01 X-37.65564 Y77.73028
G01 X-37.68320 Y77.75076
G01 X-37.74051 Y77.78901
G01 X-37.76994 Y77.80669
G01 X-37.80098 Y77.82137
G01 X-37.83238 Y77.83526
G01 X-37.86458 Y77.84768
G01 X-37.87238 Y77.85050
G01 X-37.89694 Y77.85924
G01 X-37.93024 Y77.86760
G01 X-37.99771 Y77.88101
G01 X-38.03172 Y77.88609
G01 X-38.06601 Y77.88774
G01 X-38.10045 Y77.88860
G01 X-40.45757 Y77.88860
G01 X-40.49209 Y77.88944
G01 X-40.51172 Y77.89041
G01 X-40.65409 Y77.91187
G01 X-40.65968 Y77.91652
G01 X-40.70738 Y77.95655
G01 X-40.73323 Y77.97931
G01 X-40.78421 Y78.02642
G01 X-40.79000 Y78.03178
G01 X-40.79371 Y78.03531
G01 X-40.90608 Y78.12513
G01 X-40.94327 Y78.15289
G01 X-40.96308 Y78.16394
G01 X-41.10118 Y78.23821
G01 X-41.11068 Y78.24326
G01 X-41.16537 Y78.26346
G01 X-41.29089 Y78.30402
G01 X-41.31520 Y78.30971
G01 X-41.38292 Y78.32210
G01 X-41.47842 Y78.33478
G01 X-41.53897 Y78.33775
G01 X-41.60788 Y78.33775
G01 X-41.66844 Y78.33478
G01 X-41.76392 Y78.32210
G01 X-41.83161 Y78.30971
G01 X-41.85597 Y78.30402
G01 X-41.94639 Y78.27481
G01 X-41.98149 Y78.26346
G01 X-42.03613 Y78.24326
G01 X-42.04568 Y78.23821
G01 X-42.18378 Y78.16394
G01 X-42.20356 Y78.15289
G01 X-42.24078 Y78.12513
G01 X-42.29371 Y78.08279
G01 X-42.35312 Y78.03531
G01 X-42.36259 Y78.02635
G01 X-42.41035 Y77.97664
G01 X-42.48131 Y77.89495
G01 X-42.51017 Y77.85566
G01 X-42.54812 Y77.79820
G01 X-42.58510 Y77.73582
G01 X-42.62195 Y77.65985
G01 X-42.64895 Y77.59658
G01 X-42.66173 Y77.56196
G01 X-42.69391 Y77.44631
G01 X-42.70913 Y77.37895
G01 X-42.70930 Y77.37786
G01 X-42.72338 Y77.22279
G01 X-42.72564 Y77.18832
G01 X-42.72338 Y77.15388
G01 X-42.70930 Y76.99879
G01 X-42.70913 Y76.99770
G01 X-42.69391 Y76.93034
G01 X-42.66173 Y76.81469
G01 X-42.64895 Y76.78010
G01 X-42.62198 Y76.71682
G01 X-42.58507 Y76.64085
G01 X-42.54814 Y76.57847
G01 X-42.51017 Y76.52102
G01 X-42.48131 Y76.48170
G01 X-42.41035 Y76.40004
G01 X-42.36257 Y76.35028
G01 X-42.35312 Y76.34134
G01 X-42.26894 Y76.27408
G01 X-42.24133 Y76.25081
G01 X-42.19346 Y76.20834
G01 X-42.18850 Y76.20400
G01 X-42.15099 Y76.17131
G01 X-42.07108 Y76.09099
G01 X-42.00969 Y76.02020
G01 X-41.96709 Y75.96796
G01 X-41.96282 Y75.96242
G01 X-41.87174 Y75.93478
G01 X-41.78888 Y75.91832
G01 X-41.35787 Y75.91832
G01 X-41.27512 Y75.93478
G01 X-41.12506 Y75.98030
G01 X-41.03631 Y76.01708
G01 X-40.89800 Y76.09099
G01 X-40.81812 Y76.14436
G01 X-40.79501 Y76.16333
G01 X-40.69689 Y76.24385
G01 X-40.62897 Y76.31177
G01 X-40.59897 Y76.34835
G01 X-38.44838 Y76.34835
G01 X-37.38793 Y75.28787
G01 X-37.38790 Y74.04424
G01 X-37.21747 Y73.63276
G01 X-37.20561 Y73.60205
G01 X-37.18107 Y73.53342
G01 X-37.16466 Y73.47949
G01 X-37.14747 Y73.41089
G01 X-37.13792 Y73.36293
G01 X-37.12773 Y73.29430
G01 X-37.12334 Y73.24972
G01 X-37.11996 Y73.18109
G01 X-37.11942 Y73.15930
G01 X-37.11942 Y68.71433
G01 X-37.11889 Y68.69253
G01 X-37.11551 Y68.62393
G01 X-37.11112 Y68.57935
G01 X-37.10639 Y68.54745
G01 X-37.08691 Y68.51499
G01 X-37.06240 Y68.47823
G01 X-37.02108 Y68.42253
G01 X-36.99550 Y68.39136
G01 X-36.94937 Y68.34046
G01 X-36.93591 Y68.32634
G01 X-35.03091 Y66.42134
G01 X-35.01679 Y66.40788
G01 X-34.96589 Y66.36175
G01 X-34.93472 Y66.33617
G01 X-34.87902 Y66.29485
G01 X-34.84226 Y66.27034
G01 X-34.78161 Y66.23396
G01 X-34.73647 Y66.20989
G01 X-34.67061 Y66.17875
G01 X-34.64295 Y66.16648
G01 X-34.16693 Y65.96932
G01 X-32.98687 Y65.96932
G01 X-31.89724 Y64.87969
G01 X-31.21494 Y64.19742
G01 X-31.21959 Y64.15035
G01 X-31.21959 Y64.05429
G01 X-31.20420 Y63.89821
G01 X-31.18548 Y63.80400
G01 X-31.13993 Y63.65393
G01 X-31.10318 Y63.56519
G01 X-31.02927 Y63.42688
G01 X-30.97588 Y63.34700
G01 X-30.88995 Y63.24233
G01 X-32.52987 Y63.24235
G01 X-32.55134 Y63.23219
G01 X-32.64161 Y63.19470
G01 X-32.79845 Y63.13859
G01 X-32.87191 Y63.11624
G01 X-33.02873 Y63.07695
G01 X-33.09116 Y63.06450
G01 X-33.24798 Y63.04124
G01 X-33.30407 Y63.03570
G01 X-33.46091 Y63.02800
G01 X-33.51494 Y63.02800
G01 X-33.67178 Y63.03570
G01 X-33.72786 Y63.04124
G01 X-33.88468 Y63.06450
G01 X-33.94712 Y63.07695
G01 X-34.10394 Y63.11624
G01 X-34.17739 Y63.13859
G01 X-34.33424 Y63.19470
G01 X-34.42451 Y63.23219
G01 X-34.44595 Y63.24233
G01 X-36.56649 Y63.24235
G01 X-36.59733 Y63.23621
G01 X-36.75415 Y63.21294
G01 X-36.84358 Y63.20410
G01 X-37.00043 Y63.19640
G01 X-37.08742 Y63.19640
G01 X-37.24427 Y63.20410
G01 X-37.33370 Y63.21294
G01 X-37.49052 Y63.23621
G01 X-37.52130 Y63.24233
G01 X-37.58107 Y63.26707
G01 X-37.71937 Y63.34101
G01 X-37.75785 Y63.36669
G01 X-37.75788 Y63.36671
G01 X-37.76184 Y63.37626
G01 X-37.77848 Y63.41964
G01 X-37.85432 Y63.57443
G01 X-37.87619 Y63.60981
G01 X-37.89364 Y63.63956
G01 X-37.90116 Y63.65307
G01 X-37.94985 Y63.72899
G01 X-37.98066 Y63.77100
G01 X-38.01858 Y63.82841
G01 X-38.05559 Y63.89084
G01 X-38.09245 Y63.96676
G01 X-38.11947 Y64.03013
G01 X-38.13225 Y64.06470
G01 X-38.16443 Y64.18037
G01 X-38.17962 Y64.24768
G01 X-38.17980 Y64.24878
G01 X-38.19387 Y64.40387
G01 X-38.19661 Y64.45315
G01 X-38.19702 Y64.47308
G01 X-38.20515 Y64.56780
G01 X-38.20644 Y64.57651
G01 X-38.23634 Y64.62106
G01 X-38.31465 Y64.71837
G01 X-38.31975 Y64.72366
G01 X-38.32935 Y64.73346
G01 X-39.10045 Y65.50455
G01 X-39.18516 Y65.57682
G01 X-39.21195 Y65.59630
G01 X-39.23502 Y65.61372
G01 X-39.24109 Y65.61852
G01 X-39.29885 Y65.65987
G01 X-39.37159 Y65.70719
G01 X-39.44045 Y65.74816
G01 X-39.47517 Y65.76711
G01 X-39.47804 Y65.76869
G01 X-39.47931 Y65.76861
G01 X-39.53974 Y65.75904
G01 X-39.63862 Y65.73254
G01 X-39.72986 Y65.68606
G01 X-39.80944 Y65.62167
G01 X-39.85272 Y65.57842
G01 X-39.91721 Y65.49879
G01 X-39.96257 Y65.40979
G01 X-39.94281 Y65.32749
G01 X-39.93575 Y65.29988
G01 X-39.91820 Y65.23513
G01 X-39.89537 Y65.16356
G01 X-39.86946 Y65.09348
G01 X-39.86039 Y65.07014
G01 X-39.85074 Y65.04659
G01 X-39.83227 Y65.00524
G01 X-39.80540 Y64.94989
G01 X-39.77837 Y64.88649
G01 X-39.76560 Y64.85195
G01 X-39.73341 Y64.73625
G01 X-39.71823 Y64.66897
G01 X-39.71805 Y64.66788
G01 X-39.70398 Y64.51278
G01 X-39.70172 Y64.47834
G01 X-39.70398 Y64.44387
G01 X-39.71805 Y64.28878
G01 X-39.71823 Y64.28769
G01 X-39.73344 Y64.22038
G01 X-39.76560 Y64.10471
G01 X-39.77837 Y64.07014
G01 X-39.80540 Y64.00677
G01 X-39.84228 Y63.93084
G01 X-39.87926 Y63.86841
G01 X-39.91718 Y63.81101
G01 X-39.94604 Y63.77169
G01 X-40.01701 Y63.69005
G01 X-40.06473 Y63.64032
G01 X-40.07423 Y63.63135
G01 X-40.18658 Y63.54154
G01 X-40.18769 Y63.54068
G01 X-40.22384 Y63.51375
G01 X-40.24352 Y63.50275
G01 X-40.38165 Y63.42846
G01 X-40.39120 Y63.42340
G01 X-40.44586 Y63.40319
G01 X-40.57139 Y63.36262
G01 X-40.59569 Y63.35693
G01 X-40.66346 Y63.34454
G01 X-40.75891 Y63.33189
G01 X-40.81952 Y63.32892
G01 X-40.88833 Y63.32892
G01 X-40.94893 Y63.33189
G01 X-41.04438 Y63.34454
G01 X-41.11215 Y63.35693
G01 X-41.13646 Y63.36262
G01 X-41.26199 Y63.40319
G01 X-41.31665 Y63.42340
G01 X-41.32620 Y63.42846
G01 X-41.46432 Y63.50275
G01 X-41.48408 Y63.51380
G01 X-41.52127 Y63.54154
G01 X-41.63361 Y63.63133
G01 X-41.64311 Y63.64032
G01 X-41.69084 Y63.69005
G01 X-41.76181 Y63.77169
G01 X-41.79066 Y63.81101
G01 X-41.82858 Y63.86841
G01 X-41.86559 Y63.93084
G01 X-41.90245 Y64.00677
G01 X-41.92947 Y64.07014
G01 X-41.94225 Y64.10471
G01 X-41.97443 Y64.22038
G01 X-41.98962 Y64.28769
G01 X-41.98980 Y64.28876
G01 X-42.00387 Y64.44387
G01 X-42.00613 Y64.47834
G01 X-42.00387 Y64.51278
G01 X-41.98980 Y64.66790
G01 X-41.98962 Y64.66897
G01 X-41.97443 Y64.73625
G01 X-41.94225 Y64.85195
G01 X-41.92947 Y64.88652
G01 X-41.90245 Y64.94989
G01 X-41.86559 Y65.02581
G01 X-41.82858 Y65.08825
G01 X-41.79066 Y65.14565
G01 X-41.76183 Y65.18494
G01 X-41.69084 Y65.26661
G01 X-41.67263 Y65.28672
G01 X-41.64390 Y65.31730
G01 X-41.59767 Y65.37161
G01 X-41.57753 Y65.39775
G01 X-41.57121 Y65.42678
G01 X-41.55477 Y65.55962
G01 X-41.55444 Y65.57105
G01 X-41.55416 Y65.59129
G01 X-41.55416 Y67.96884
G01 X-41.56295 Y68.07986
G01 X-41.57265 Y68.14105
G01 X-41.63186 Y68.34036
G01 X-41.68248 Y68.35852
G01 X-41.74367 Y68.37841
G01 X-41.91726 Y68.41346
G01 X-41.94822 Y68.41590
G01 X-42.00341 Y68.41809
G01 X-42.37341 Y68.41809
G01 X-42.41413 Y68.41925
G01 X-42.43161 Y68.42129
G01 X-42.51769 Y68.44775
G01 X-42.59023 Y68.49162
G01 X-42.65015 Y68.55154
G01 X-42.69399 Y68.62405
G01 X-42.72045 Y68.71019
G01 X-42.72251 Y68.72769
G01 X-42.72368 Y68.76830
G01 X-42.72368 Y70.36832
G01 X-42.72251 Y70.40899
G01 X-42.72045 Y70.42646
G01 X-42.69399 Y70.51259
G01 X-42.65015 Y70.58514
G01 X-42.59020 Y70.64506
G01 X-42.54720 Y70.67249
G01 X-42.44878 Y70.73035
G01 X-42.39094 Y70.76126
G01 X-42.37341 Y70.76974
G01 X-42.23676 Y70.85831
G01 X-42.22350 Y70.86692
G01 X-42.21944 Y70.87658
G01 X-42.20016 Y70.97726
G01 X-42.19950 Y70.98460
G01 X-42.23153 Y71.04353
G01 X-42.27720 Y71.12710
G01 X-42.35985 Y71.25052
G01 X-42.36930 Y71.26207
G01 X-42.39155 Y71.29075
G01 X-42.41210 Y71.31861
G01 X-42.44748 Y71.36276
G01 X-42.48134 Y71.40170
G01 X-42.51017 Y71.44102
G01 X-42.54814 Y71.49847
G01 X-42.58507 Y71.56085
G01 X-42.62198 Y71.63682
G01 X-42.64895 Y71.70010
G01 X-42.66173 Y71.73469
G01 X-42.69391 Y71.85034
G01 X-42.70913 Y71.91770
G01 X-42.70930 Y71.91879
G01 X-42.72338 Y72.07388
G01 X-42.72564 Y72.10832
G01 X-42.72338 Y72.14279
G01 X-42.70930 Y72.29786
G01 X-42.70913 Y72.29895
G01 X-42.69391 Y72.36631
G01 X-42.66173 Y72.48196
G01 X-42.64895 Y72.51658
G01 X-42.62195 Y72.57985
G01 X-42.58510 Y72.65580
G01 X-42.54812 Y72.71820
G01 X-42.51017 Y72.77563
G01 X-42.48131 Y72.81495
G01 X-42.41035 Y72.89661
G01 X-42.36259 Y72.94635
G01 X-42.35312 Y72.95531
G01 X-42.26894 Y73.02260
G01 X-42.24136 Y73.04584
G01 X-42.18848 Y73.09273
G01 X-42.18424 Y73.09654
G01 X-42.13742 Y73.13870
G01 X-42.07113 Y73.20583
G01 X-42.00948 Y73.27578
G01 X-41.96326 Y73.33408
G01 X-41.96105 Y73.36692
G01 X-41.96282 Y73.42242
G01 X-41.96709 Y73.42796
G01 X-42.00969 Y73.48020
G01 X-42.07108 Y73.55099
G01 X-42.15099 Y73.63131
G01 X-42.18850 Y73.66400
G01 X-42.19346 Y73.66834
G01 X-42.24133 Y73.71081
G01 X-42.26894 Y73.73408
G01 X-42.35312 Y73.80134
G01 X-42.36257 Y73.81028
G01 X-42.41035 Y73.86004
G01 X-42.48131 Y73.94170
G01 X-42.51017 Y73.98102
G01 X-42.54814 Y74.03847
G01 X-42.58507 Y74.10085
G01 X-42.62198 Y74.17682
G01 X-42.64895 Y74.24010
G01 X-42.66173 Y74.27469
G01 X-42.69391 Y74.39034
G01 X-42.70913 Y74.45770
G01 X-42.70930 Y74.45879
G01 X-42.72338 Y74.61388
G01 X-42.72564 Y74.64832
G01 X-42.72338 Y74.68279
G01 X-42.70930 Y74.83786
G01 X-42.70913 Y74.83895
G01 X-42.69391 Y74.90631
G01 X-42.66173 Y75.02196
G01 X-42.64895 Y75.05658
G01 X-42.62195 Y75.11985
G01 X-42.58510 Y75.19580
G01 X-42.54812 Y75.25820
G01 X-42.51017 Y75.31563
G01 X-42.48131 Y75.35495
G01 X-42.41035 Y75.43661
G01 X-42.36259 Y75.48635
G01 X-42.35312 Y75.49531
G01 X-42.26894 Y75.56260
G01 X-42.24136 Y75.58584
G01 X-42.18848 Y75.63273
G01 X-42.18424 Y75.63654
G01 X-42.13742 Y75.67870
G01 X-42.07113 Y75.74583
G01 X-42.00948 Y75.81578
G01 X-41.96326 Y75.87408
G01 X-41.96105 Y75.90692
G01 X-41.96282 Y75.96242
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.40594 Y83.19100 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.40594 Y83.19100
G01 X-48.43413 Y83.28704
G01 X-48.61696 Y83.46992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-48.36558 Y83.46992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-48.36558 Y83.46992
G01 X-48.61696 Y83.46992
G01 X-49.20810 Y83.71478
G01 X-49.23167 Y83.72387
G01 X-49.30027 Y83.74843
G01 X-49.34056 Y83.76068
G01 X-49.40916 Y83.77785
G01 X-49.44416 Y83.78483
G01 X-49.51277 Y83.79502
G01 X-49.54477 Y83.79817
G01 X-49.61341 Y83.80154
G01 X-49.62892 Y83.80193
G01 X-76.24815 Y83.80193
G01 X-76.26367 Y83.80154
G01 X-76.33227 Y83.79817
G01 X-76.36428 Y83.79502
G01 X-76.43288 Y83.78483
G01 X-76.46789 Y83.77785
G01 X-76.53649 Y83.76068
G01 X-76.57678 Y83.74843
G01 X-76.64538 Y83.72387
G01 X-76.66895 Y83.71475
G01 X-77.26006 Y83.46992
G01 X-77.47500 Y83.46992
G01 X-78.30573 Y82.63919
G01 X-78.26989 Y82.60978
G01 X-78.20197 Y82.54186
G01 X-78.19572 Y82.53426
G01 X-78.20453 Y82.35473
G01 X-78.20527 Y82.33632
G01 X-78.20608 Y82.30924
G01 X-78.20954 Y82.25504
G01 X-78.21241 Y82.22565
G01 X-78.21561 Y82.16279
G01 X-78.21561 Y82.08499
G01 X-78.21548 Y82.07401
G01 X-78.21472 Y82.03934
G01 X-78.21459 Y82.02992
G01 X-78.21459 Y81.96761
G01 X-78.21284 Y81.93152
G01 X-78.20664 Y81.86845
G01 X-78.20606 Y81.86190
G01 X-78.20484 Y81.84613
G01 X-78.20423 Y81.83691
G01 X-78.19653 Y81.68009
G01 X-78.19653 Y81.65055
G01 X-78.20425 Y81.49375
G01 X-78.20733 Y81.46241
G01 X-78.23059 Y81.30559
G01 X-78.23796 Y81.26863
G01 X-78.27725 Y81.11181
G01 X-78.29145 Y81.06510
G01 X-78.34756 Y80.90828
G01 X-78.37314 Y80.84671
G01 X-78.38929 Y80.81252
G01 X-78.47723 Y80.73284
G01 X-78.48627 Y80.73201
G01 X-78.55688 Y80.72863
G01 X-78.66587 Y80.72863
G01 X-78.71894 Y80.72609
G01 X-78.73263 Y80.72474
G01 X-78.77847 Y80.72243
G01 X-78.88393 Y80.72243
G01 X-78.91982 Y80.72070
G01 X-78.94119 Y80.71859
G01 X-78.97420 Y80.71697
G01 X-79.07779 Y80.71697
G01 X-79.10794 Y80.71550
G01 X-79.13143 Y80.71316
G01 X-79.16158 Y80.71169
G01 X-79.26514 Y80.71169
G01 X-79.29816 Y80.71006
G01 X-79.31952 Y80.70795
G01 X-79.35541 Y80.70622
G01 X-79.46089 Y80.70622
G01 X-79.50677 Y80.70391
G01 X-79.52041 Y80.70257
G01 X-79.57347 Y80.70003
G01 X-79.68248 Y80.70003
G01 X-79.75307 Y80.69665
G01 X-79.75711 Y80.69627
G01 X-79.84344 Y80.69238
G01 X-79.89191 Y80.69238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.19572 Y82.53426 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.19572 Y82.53426
G01 X-77.26006 Y83.46992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.87966 Y86.65409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.87966 Y86.65409
G01 X-82.90008 Y86.70344
G01 X-82.97402 Y86.84175
G01 X-82.99520 Y86.87352
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.83515 Y90.58550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.83515 Y90.58550
G01 X-88.10401 Y90.85434
G01 X-88.40627 Y90.85434
G01 X-88.52562 Y90.75637
G01 X-88.60550 Y90.70300
G01 X-88.74381 Y90.62906
G01 X-88.83255 Y90.59231
G01 X-88.85486 Y90.58555
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.46804 Y89.56950 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.46804 Y89.56950
G01 X-91.88975 Y90.99119
G01 X-91.90131 Y91.01560
G01 X-91.94629 Y91.09990
G01 X-92.02940 Y91.23859
G01 X-92.07443 Y91.30605
G01 X-92.16887 Y91.43341
G01 X-92.21525 Y91.48992
G01 X-92.29102 Y91.57356
G01 X-92.33514 Y91.59442
G01 X-92.39935 Y91.62109
G01 X-92.55619 Y91.67720
G01 X-92.60534 Y91.69216
G01 X-92.76216 Y91.73142
G01 X-92.80141 Y91.73925
G01 X-92.95825 Y91.76251
G01 X-92.99180 Y91.76582
G01 X-93.14865 Y91.77354
G01 X-93.18042 Y91.77354
G01 X-93.33724 Y91.76582
G01 X-93.37080 Y91.76251
G01 X-93.52764 Y91.73925
G01 X-93.56689 Y91.73142
G01 X-93.72371 Y91.69216
G01 X-93.77285 Y91.67720
G01 X-93.92970 Y91.62109
G01 X-93.99391 Y91.59442
G01 X-94.09008 Y91.54893
G01 X-95.24702 Y91.54893
G01 X-95.42515 Y91.62271
G01 X-95.45469 Y91.63579
G01 X-95.52055 Y91.66696
G01 X-95.56907 Y91.69284
G01 X-95.62972 Y91.72919
G01 X-95.66942 Y91.75568
G01 X-95.72512 Y91.79701
G01 X-95.75893 Y91.82474
G01 X-95.80983 Y91.87087
G01 X-95.82517 Y91.88548
G01 X-98.96207 Y95.02238
G01 X-98.97742 Y95.03698
G01 X-99.02832 Y95.08311
G01 X-99.06213 Y95.11084
G01 X-99.11783 Y95.15217
G01 X-99.14986 Y95.17396
G01 X-99.15852 Y95.17533
G01 X-99.22715 Y95.18552
G01 X-99.27173 Y95.18991
G01 X-99.34036 Y95.19329
G01 X-99.36215 Y95.19383
G01 X-120.26193 Y95.19383
G01 X-120.28370 Y95.19329
G01 X-120.35230 Y95.18991
G01 X-120.39688 Y95.18552
G01 X-120.46551 Y95.17533
G01 X-120.51347 Y95.16578
G01 X-120.58207 Y95.14859
G01 X-120.63600 Y95.13218
G01 X-120.70463 Y95.10764
G01 X-120.73536 Y95.09578
G01 X-120.81598 Y95.06238
G01 X-120.87689 Y94.91531
G01 X-121.16891 Y94.62329
G01 X-121.64684 Y94.42532
G01 X-121.89632 Y94.17584
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-121.99418 Y94.42532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-121.99418 Y94.42532
G01 X-121.64684 Y94.42532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-123.35893 Y96.14775 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-123.35893 Y96.14775
G01 X-123.37432 Y96.17378
G01 X-123.43690 Y96.20990
G01 X-123.51725 Y96.23914
G01 X-123.59174 Y96.25908
G01 X-123.67577 Y96.27388
G01 X-123.76109 Y96.27388
G01 X-123.84511 Y96.25908
G01 X-123.91961 Y96.23914
G01 X-123.99995 Y96.20990
G01 X-124.07401 Y96.16715
G01 X-124.13949 Y96.11219
G01 X-124.19403 Y96.05763
G01 X-124.27180 Y95.95623
G01 X-124.38549 Y95.75933
G01 X-124.50792 Y95.60581
G01 X-124.63091 Y95.49172
G01 X-124.63091 Y95.52489
G01 X-124.59441 Y95.55486
G01 X-124.52649 Y95.62278
G01 X-124.42700 Y95.74401
G01 X-124.37363 Y95.82387
G01 X-124.29969 Y95.96218
G01 X-124.26294 Y96.05092
G01 X-124.21740 Y96.20101
G01 X-124.19868 Y96.29522
G01 X-124.18331 Y96.45128
G01 X-124.18331 Y96.54734
G01 X-124.19868 Y96.70342
G01 X-124.21740 Y96.79763
G01 X-124.26294 Y96.94770
G01 X-124.29969 Y97.03644
G01 X-124.37363 Y97.17475
G01 X-124.42700 Y97.25463
G01 X-124.52649 Y97.37586
G01 X-124.59441 Y97.44378
G01 X-124.71562 Y97.54327
G01 X-124.78900 Y97.59232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.72722 Y95.63515 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.72722 Y95.63515
G01 X-126.72095 Y95.69931
G01 X-126.72092 Y96.18928
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.72092 Y96.80932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.72092 Y96.80932
G01 X-126.67894 Y96.94770
G01 X-126.64218 Y97.03644
G01 X-126.56824 Y97.17475
G01 X-126.51488 Y97.25463
G01 X-126.41539 Y97.37586
G01 X-126.34747 Y97.44378
G01 X-126.22626 Y97.54327
G01 X-126.15283 Y97.59232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.12937 Y103.42998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.12937 Y103.42998
G01 X-133.22962 Y103.51227
G01 X-133.30950 Y103.56564
G01 X-133.43026 Y103.63018
G01 X-133.44781 Y103.63955
G01 X-133.53655 Y103.67631
G01 X-133.68662 Y103.72185
G01 X-133.78083 Y103.74057
G01 X-133.93691 Y103.75596
G01 X-134.03297 Y103.75596
G01 X-134.18903 Y103.74057
G01 X-134.28324 Y103.72185
G01 X-134.38156 Y103.69201
G01 X-134.43333 Y103.67631
G01 X-134.52207 Y103.63955
G01 X-134.66038 Y103.56564
G01 X-134.74024 Y103.51227
G01 X-134.86147 Y103.41278
G01 X-134.92939 Y103.34486
G01 X-134.95939 Y103.30831
G01 X-136.05850 Y103.30831
G01 X-136.08847 Y103.34486
G01 X-136.15639 Y103.41278
G01 X-136.27762 Y103.51227
G01 X-136.35750 Y103.56564
G01 X-136.49581 Y103.63955
G01 X-136.58455 Y103.67631
G01 X-136.63632 Y103.69201
G01 X-136.73462 Y103.72185
G01 X-136.82883 Y103.74057
G01 X-136.98491 Y103.75596
G01 X-137.08097 Y103.75596
G01 X-137.23703 Y103.74057
G01 X-137.33124 Y103.72185
G01 X-137.48133 Y103.67631
G01 X-137.57007 Y103.63955
G01 X-137.70838 Y103.56564
G01 X-137.78824 Y103.51227
G01 X-137.88773 Y103.43064
G01 X-137.89700 Y103.39759
G01 X-137.92562 Y103.30237
G01 X-137.96339 Y103.20036
G01 X-137.98620 Y103.14921
G01 X-137.99558 Y103.12724
G01 X-138.01419 Y103.08169
G01 X-138.03284 Y103.04001
G01 X-138.08148 Y102.93986
G01 X-138.10845 Y102.87656
G01 X-138.12123 Y102.84197
G01 X-138.15341 Y102.72632
G01 X-138.16863 Y102.65896
G01 X-138.16880 Y102.65787
G01 X-138.18287 Y102.50278
G01 X-138.18514 Y102.46833
G01 X-138.18287 Y102.43387
G01 X-138.16880 Y102.27877
G01 X-138.16863 Y102.27768
G01 X-138.15341 Y102.21035
G01 X-138.12123 Y102.09470
G01 X-138.10845 Y102.06008
G01 X-138.08145 Y101.99681
G01 X-138.04457 Y101.92084
G01 X-138.00761 Y101.85846
G01 X-137.96967 Y101.80100
G01 X-137.94081 Y101.76168
G01 X-137.86985 Y101.68005
G01 X-137.82212 Y101.63031
G01 X-137.81262 Y101.62135
G01 X-137.70028 Y101.53153
G01 X-137.66309 Y101.50379
G01 X-137.64328 Y101.49272
G01 X-137.50518 Y101.41845
G01 X-137.49565 Y101.41342
G01 X-137.44102 Y101.39323
G01 X-137.31544 Y101.35264
G01 X-137.29116 Y101.34695
G01 X-137.22336 Y101.33455
G01 X-137.12791 Y101.32188
G01 X-137.06733 Y101.31891
G01 X-136.99852 Y101.31891
G01 X-136.93794 Y101.32188
G01 X-136.84247 Y101.33455
G01 X-136.79108 Y101.34332
G01 X-136.77465 Y101.34695
G01 X-136.75029 Y101.35264
G01 X-136.62481 Y101.39323
G01 X-136.57015 Y101.41345
G01 X-136.56068 Y101.41843
G01 X-136.54813 Y101.42518
G01 X-136.42258 Y101.49272
G01 X-136.40277 Y101.50379
G01 X-136.36558 Y101.53153
G01 X-136.25062 Y101.62343
G01 X-136.24336 Y101.62980
G01 X-136.22540 Y101.64540
G01 X-136.19228 Y101.67603
G01 X-136.19174 Y101.67657
G01 X-136.11311 Y101.74382
G01 X-136.06449 Y101.75185
G01 X-135.98738 Y101.76201
G01 X-135.89515 Y101.76808
G01 X-135.12273 Y101.76808
G01 X-135.06942 Y101.76605
G01 X-135.02444 Y101.76262
G01 X-134.90493 Y101.74344
G01 X-134.88067 Y101.72287
G01 X-134.82723 Y101.67563
G01 X-134.82215 Y101.67116
G01 X-134.77450 Y101.62980
G01 X-134.76736 Y101.62353
G01 X-134.65228 Y101.53153
G01 X-134.61509 Y101.50379
G01 X-134.59528 Y101.49272
G01 X-134.45718 Y101.41845
G01 X-134.44765 Y101.41342
G01 X-134.39302 Y101.39323
G01 X-134.26744 Y101.35264
G01 X-134.24316 Y101.34695
G01 X-134.17536 Y101.33455
G01 X-134.07991 Y101.32188
G01 X-134.01933 Y101.31891
G01 X-133.95052 Y101.31891
G01 X-133.88994 Y101.32188
G01 X-133.79447 Y101.33455
G01 X-133.74308 Y101.34332
G01 X-133.72665 Y101.34695
G01 X-133.70229 Y101.35264
G01 X-133.57681 Y101.39323
G01 X-133.52215 Y101.41345
G01 X-133.51268 Y101.41843
G01 X-133.50013 Y101.42518
G01 X-133.37458 Y101.49272
G01 X-133.35477 Y101.50379
G01 X-133.31758 Y101.53153
G01 X-133.20521 Y101.62135
G01 X-133.19574 Y101.63029
G01 X-133.14801 Y101.68005
G01 X-133.07704 Y101.76168
G01 X-133.04819 Y101.80100
G01 X-133.01027 Y101.85840
G01 X-132.97326 Y101.92084
G01 X-132.93640 Y101.99676
G01 X-132.90938 Y102.06013
G01 X-132.89660 Y102.09470
G01 X-132.86853 Y102.19567
G01 X-132.86442 Y102.21040
G01 X-132.84923 Y102.27768
G01 X-132.84905 Y102.27877
G01 X-132.83498 Y102.43387
G01 X-132.83272 Y102.46833
G01 X-132.83498 Y102.50278
G01 X-132.84905 Y102.65789
G01 X-132.84923 Y102.65896
G01 X-132.86442 Y102.72627
G01 X-132.89660 Y102.84197
G01 X-132.90938 Y102.87651
G01 X-132.93640 Y102.93989
G01 X-132.98502 Y103.03999
G01 X-133.00366 Y103.08174
G01 X-133.01453 Y103.10829
G01 X-133.03242 Y103.14857
G01 X-133.04044 Y103.16534
G01 X-133.09170 Y103.30280
G01 X-133.10742 Y103.35909
G01 X-133.11949 Y103.39927
G01 X-133.12937 Y103.42998
G01 X-133.12566 Y103.44385
G01 X-133.09645 Y103.52411
G01 X-133.05373 Y103.59808
G01 X-132.99884 Y103.66353
G01 X-132.97034 Y103.69201
G01 X-132.94430 Y103.71807
G01 X-132.87887 Y103.77295
G01 X-132.80491 Y103.81565
G01 X-132.72464 Y103.84486
G01 X-132.65015 Y103.86483
G01 X-132.52332 Y103.88154
G01 X-101.59395 Y103.88154
G01 X-101.46710 Y103.86483
G01 X-101.39260 Y103.84486
G01 X-101.31239 Y103.81568
G01 X-101.23845 Y103.77301
G01 X-101.17304 Y103.71814
G01 X-101.14691 Y103.69201
G01 X-101.11848 Y103.66361
G01 X-101.06349 Y103.59810
G01 X-101.02074 Y103.52403
G01 X-100.99153 Y103.44369
G01 X-100.97160 Y103.36917
G01 X-100.95493 Y103.24250
G01 X-100.95493 Y97.29115
G01 X-100.94813 Y97.27909
G01 X-100.90086 Y97.16263
G01 X-100.88160 Y97.08938
G01 X-100.86723 Y97.00596
G01 X-100.86743 Y96.92133
G01 X-100.88221 Y96.83799
G01 X-100.90218 Y96.76349
G01 X-100.93139 Y96.68323
G01 X-100.96751 Y96.62067
G01 X-100.99352 Y96.60530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-97.65491 Y97.39136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-97.65491 Y97.39136
G01 X-97.61519 Y97.33190
G01 X-97.49083 Y97.18036
G01 X-97.42289 Y97.11244
G01 X-97.40993 Y97.10180
G01 X-97.27135 Y96.98806
G01 X-97.23691 Y96.96504
G01 X-97.23691 Y95.61432
G01 X-97.23454 Y95.56632
G01 X-97.22784 Y95.49802
G01 X-97.20909 Y95.40381
G01 X-97.18918 Y95.33815
G01 X-97.15243 Y95.24943
G01 X-97.12007 Y95.18890
G01 X-97.07887 Y95.12723
G01 X-97.07874 Y95.12707
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.01780 Y92.09005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.01780 Y92.09005
G01 X-95.66990 Y87.93224
G01 X-95.64298 Y87.87662
G01 X-95.62881 Y87.84192
G01 X-95.60160 Y87.75104
G01 X-95.60125 Y87.74746
G01 X-95.60666 Y87.72930
G01 X-95.60668 Y87.72930
G01 X-95.62843 Y87.65663
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-92.40100 Y86.85732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.40100 Y86.85732
G01 X-85.72217 Y86.85732
G01 X-85.70193 Y86.85688
G01 X-85.68963 Y86.85638
G01 X-85.61597 Y86.84772
G01 X-85.54445 Y86.82803
G01 X-85.47186 Y86.80200
G01 X-85.39428 Y86.76628
G01 X-85.32408 Y86.71762
G01 X-85.26388 Y86.65798
G01 X-85.26375 Y86.65722
G01 X-85.26312 Y86.65381
G01 X-85.26314 Y86.65381
G01 X-85.25463 Y86.60720
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.14742 Y86.87352 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.14742 Y86.87352
G01 X-92.38480 Y86.87352
G01 X-92.40100 Y86.85732
G01 X-92.53156 Y86.80324
G01 X-92.63468 Y86.75257
G01 X-92.70384 Y86.71266
G01 X-92.82185 Y86.62839
G01 X-92.85116 Y86.60266
G01 X-92.88459 Y86.57134
G01 X-94.24844 Y85.20751
G01 X-94.30938 Y85.13797
G01 X-94.35675 Y85.07624
G01 X-94.37407 Y85.05275
G01 X-94.39061 Y84.93934
G01 X-94.39317 Y84.90042
G01 X-94.39467 Y84.85448
G01 X-94.39467 Y82.13236
G01 X-94.38860 Y82.04011
G01 X-94.37844 Y81.96299
G01 X-94.32292 Y81.75951
G01 X-94.29099 Y81.68237
G01 X-94.26389 Y81.62255
G01 X-94.22271 Y81.59152
G01 X-94.18947 Y81.56784
G01 X-94.17875 Y81.56022
G01 X-94.17694 Y81.55918
G01 X-94.10476 Y81.53292
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.12972 Y81.50356 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.12972 Y81.50356
G01 X-94.15048 Y81.52885
G01 X-94.18947 Y81.56784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.01992 Y79.96028 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.01992 Y79.96028
G01 X-96.15017 Y79.89866
G01 X-96.20595 Y79.87547
G01 X-96.36279 Y79.81938
G01 X-96.40409 Y79.80681
G01 X-96.56091 Y79.76752
G01 X-96.59266 Y79.76119
G01 X-96.74951 Y79.73795
G01 X-96.77579 Y79.73533
G01 X-96.93261 Y79.72764
G01 X-96.95723 Y79.72764
G01 X-97.11405 Y79.73533
G01 X-97.14036 Y79.73795
G01 X-97.29718 Y79.76119
G01 X-97.32893 Y79.76752
G01 X-97.48575 Y79.80681
G01 X-97.52710 Y79.81938
G01 X-97.68392 Y79.87549
G01 X-97.73967 Y79.89866
G01 X-97.86010 Y79.95560
G01 X-97.88166 Y79.98502
G01 X-97.91958 Y80.04240
G01 X-97.95659 Y80.10485
G01 X-97.99345 Y80.18075
G01 X-98.02047 Y80.24412
G01 X-98.03325 Y80.27869
G01 X-98.06543 Y80.39439
G01 X-98.08062 Y80.46170
G01 X-98.08082 Y80.46279
G01 X-98.09487 Y80.61786
G01 X-98.09715 Y80.65233
G01 X-98.09487 Y80.68677
G01 X-98.08082 Y80.84186
G01 X-98.08062 Y80.84295
G01 X-98.06543 Y80.91026
G01 X-98.03325 Y81.02596
G01 X-98.02047 Y81.06053
G01 X-97.99345 Y81.12390
G01 X-97.95659 Y81.19980
G01 X-97.91958 Y81.26226
G01 X-97.88166 Y81.31963
G01 X-97.85281 Y81.35898
G01 X-97.78184 Y81.44061
G01 X-97.77676 Y81.44641
G01 X-97.73584 Y81.49243
G01 X-97.71526 Y81.51664
G01 X-97.66990 Y81.57241
G01 X-97.66827 Y81.57907
G01 X-97.64806 Y81.71336
G01 X-97.64623 Y81.74615
G01 X-97.64519 Y81.78478
G01 X-97.64519 Y85.20314
G01 X-97.64432 Y85.23756
G01 X-97.64265 Y85.27180
G01 X-97.63759 Y85.30586
G01 X-97.62583 Y85.36654
G01 X-97.62416 Y85.37332
G01 X-97.61582 Y85.40665
G01 X-97.60424 Y85.43898
G01 X-97.57790 Y85.50258
G01 X-97.56535 Y85.52915
G01 X-97.56319 Y85.53370
G01 X-97.54559 Y85.56309
G01 X-97.53774 Y85.57586
G01 X-97.50732 Y85.62036
G01 X-97.48689 Y85.64787
G01 X-97.46375 Y85.67340
G01 X-97.44006 Y85.69829
G01 X-95.87331 Y87.26504
G01 X-95.81237 Y87.33458
G01 X-95.76500 Y87.39630
G01 X-95.66038 Y87.57949
G01 X-95.62843 Y87.65663
G01 X-95.60666 Y87.72930
G01 X-94.01250 Y89.32348
G01 X-93.99406 Y89.34019
G01 X-93.97687 Y89.35579
G01 X-93.92383 Y89.39930
G01 X-93.84397 Y89.45266
G01 X-93.78347 Y89.48502
G01 X-93.69472 Y89.52178
G01 X-93.62907 Y89.54169
G01 X-93.53486 Y89.56044
G01 X-93.48449 Y89.56539
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-92.83077 Y89.56953 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.83077 Y89.56953
G01 X-92.71614 Y89.60430
G01 X-92.62742 Y89.64106
G01 X-92.48909 Y89.71499
G01 X-92.40923 Y89.76836
G01 X-92.28800 Y89.86785
G01 X-92.22008 Y89.93577
G01 X-92.15635 Y90.01342
G01 X-92.12058 Y90.05701
G01 X-92.06722 Y90.13686
G01 X-91.99328 Y90.27519
G01 X-91.95653 Y90.36391
G01 X-91.91101 Y90.51400
G01 X-91.89226 Y90.60821
G01 X-91.87690 Y90.76429
G01 X-91.87690 Y90.86033
G01 X-91.88975 Y90.99119
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.35611 Y93.40445 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.35611 Y93.40445
G01 X-95.07720 Y93.12550
G01 X-91.99615 Y93.12550
G01 X-91.94812 Y93.12314
G01 X-91.87982 Y93.11644
G01 X-91.78561 Y93.09769
G01 X-91.71995 Y93.07778
G01 X-91.63120 Y93.04102
G01 X-91.57070 Y93.00866
G01 X-91.49084 Y92.95530
G01 X-91.43781 Y92.91179
G01 X-91.40217 Y92.87948
G01 X-90.54886 Y92.02617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.04040 Y95.01181 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.04040 Y95.01181
G01 X-88.04040 Y94.92631
G01 X-88.07172 Y94.92631
G01 X-88.08252 Y94.92060
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.43141 Y92.27140 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.43141 Y92.27140
G01 X-87.40419 Y92.33744
G01 X-87.33025 Y92.47575
G01 X-87.27688 Y92.55563
G01 X-87.17739 Y92.67686
G01 X-87.10947 Y92.74478
G01 X-87.07292 Y92.77475
G01 X-87.07292 Y92.84938
G01 X-87.46987 Y93.24633
G01 X-94.86894 Y93.24633
G01 X-94.91695 Y93.24869
G01 X-94.98525 Y93.25540
G01 X-95.07946 Y93.27414
G01 X-95.14512 Y93.29406
G01 X-95.23386 Y93.33084
G01 X-95.29437 Y93.36317
G01 X-95.35599 Y93.40434
G01 X-95.35611 Y93.40445
G01 X-95.35621 Y93.40455
G01 X-95.37290 Y93.41824
G01 X-95.42380 Y93.46436
G01 X-95.45817 Y93.49708
G01 X-96.98616 Y95.02509
G01 X-97.01887 Y95.05946
G01 X-97.06502 Y95.11034
G01 X-97.07864 Y95.12697
G01 X-97.68959 Y95.73789
G01 X-98.31097 Y96.35928
G01 X-98.34661 Y96.39159
G01 X-98.39964 Y96.43510
G01 X-98.47950 Y96.48846
G01 X-98.54000 Y96.52082
G01 X-98.62875 Y96.55758
G01 X-98.69441 Y96.57749
G01 X-98.78862 Y96.59624
G01 X-98.85692 Y96.60294
G01 X-98.90495 Y96.60530
G01 X-100.99352 Y96.60530
G01 X-101.05445 Y96.56931
G01 X-101.13156 Y96.53736
G01 X-101.33515 Y96.48181
G01 X-101.41226 Y96.47165
G01 X-101.50451 Y96.46558
G01 X-120.38901 Y96.46558
G01 X-120.40625 Y96.46578
G01 X-120.42124 Y96.46616
G01 X-120.53252 Y96.47772
G01 X-120.60966 Y96.49187
G01 X-120.75228 Y96.53197
G01 X-120.77849 Y96.59695
G01 X-120.78504 Y96.61534
G01 X-120.79429 Y96.64000
G01 X-120.82441 Y96.70927
G01 X-120.83374 Y96.73009
G01 X-120.89221 Y96.83210
G01 X-120.95215 Y96.89204
G01 X-121.03254 Y96.93997
G01 X-121.09086 Y96.96492
G01 X-121.16538 Y96.99222
G01 X-121.16894 Y96.99331
G01 X-121.25781 Y97.02644
G01 X-121.29307 Y97.13936
G01 X-121.29843 Y97.16233
G01 X-121.30765 Y97.19791
G01 X-121.31273 Y97.21567
G01 X-121.32500 Y97.26517
G01 X-121.33366 Y97.30642
G01 X-121.33968 Y97.33251
G01 X-121.34803 Y97.36586
G01 X-121.35959 Y97.39816
G01 X-121.38593 Y97.46177
G01 X-121.40061 Y97.49283
G01 X-121.41824 Y97.52227
G01 X-121.45652 Y97.57955
G01 X-121.47696 Y97.60710
G01 X-121.50005 Y97.63258
G01 X-121.52378 Y97.65747
G01 X-122.79378 Y98.92747
G01 X-122.81867 Y98.95120
G01 X-122.84415 Y98.97429
G01 X-122.87170 Y98.99473
G01 X-122.92898 Y99.03301
G01 X-122.95842 Y99.05064
G01 X-122.98948 Y99.06532
G01 X-123.05309 Y99.09166
G01 X-123.08542 Y99.10322
G01 X-123.11874 Y99.11157
G01 X-123.18621 Y99.12501
G01 X-123.22022 Y99.13004
G01 X-123.25451 Y99.13174
G01 X-123.28895 Y99.13258
G01 X-126.84495 Y99.13258
G01 X-126.87939 Y99.13174
G01 X-126.91363 Y99.13004
G01 X-126.94767 Y99.12501
G01 X-127.01510 Y99.11157
G01 X-127.04856 Y99.10319
G01 X-127.04929 Y99.10294
G01 X-127.08076 Y99.09166
G01 X-127.14437 Y99.06534
G01 X-127.17540 Y99.05064
G01 X-127.20487 Y99.03301
G01 X-127.26214 Y98.99473
G01 X-127.28970 Y98.97429
G01 X-127.31518 Y98.95120
G01 X-127.34007 Y98.92747
G01 X-128.47167 Y97.79588
G01 X-128.50532 Y97.76436
G01 X-128.50725 Y97.76268
G01 X-128.53283 Y97.73911
G01 X-128.53405 Y97.73791
G01 X-128.58493 Y97.69311
G01 X-128.60967 Y97.67327
G01 X-128.65541 Y97.66580
G01 X-128.73253 Y97.65564
G01 X-128.81094 Y97.64970
G01 X-128.82475 Y97.64945
G01 X-128.85158 Y97.64841
G01 X-128.86913 Y97.64635
G01 X-128.88221 Y97.64310
G01 X-128.95521 Y97.61988
G01 X-128.98142 Y97.60540
G01 X-129.02770 Y97.57607
G01 X-129.08764 Y97.51610
G01 X-129.13148 Y97.44360
G01 X-129.15795 Y97.35747
G01 X-129.16001 Y97.33997
G01 X-129.16118 Y97.29931
G01 X-129.16118 Y95.69931
G01 X-129.16001 Y95.65867
G01 X-129.15795 Y95.64117
G01 X-129.13148 Y95.55504
G01 X-129.08764 Y95.48255
G01 X-129.02770 Y95.42260
G01 X-128.95521 Y95.37876
G01 X-128.86908 Y95.35230
G01 X-128.85158 Y95.35024
G01 X-128.81094 Y95.34907
G01 X-127.21091 Y95.34907
G01 X-127.17027 Y95.35024
G01 X-127.15277 Y95.35230
G01 X-127.06667 Y95.37876
G01 X-126.98206 Y95.43114
G01 X-126.94632 Y95.45692
G01 X-126.91660 Y95.47952
G01 X-126.78308 Y95.58646
G01 X-126.72725 Y95.63515
G01 X-126.72722 Y95.63515
G01 X-126.72613 Y95.63614
G01 X-126.70779 Y95.63683
G01 X-126.62245 Y95.63258
G01 X-126.53916 Y95.61359
G01 X-126.46044 Y95.58039
G01 X-126.39225 Y95.54435
G01 X-126.31094 Y95.48666
G01 X-126.31094 Y95.52486
G01 X-126.34747 Y95.55486
G01 X-126.40832 Y95.61569
G01 X-126.41539 Y95.62278
G01 X-126.51488 Y95.74401
G01 X-126.56824 Y95.82387
G01 X-126.64218 Y95.96218
G01 X-126.67894 Y96.05092
G01 X-126.72092 Y96.18928
G01 X-126.72273 Y96.20160
G01 X-126.73210 Y96.29634
G01 X-126.73979 Y96.45316
G01 X-126.73979 Y96.54549
G01 X-126.73210 Y96.70233
G01 X-126.72273 Y96.79710
G01 X-126.72092 Y96.80932
G01 X-126.72095 Y97.29931
G01 X-126.72712 Y97.36217
G01 X-126.49700 Y97.59232
G01 X-126.15283 Y97.59232
G01 X-126.14531 Y97.59461
G01 X-125.98849 Y97.63390
G01 X-125.90223 Y97.65110
G01 X-125.74543 Y97.67436
G01 X-125.66621 Y97.68219
G01 X-125.50937 Y97.68988
G01 X-125.43248 Y97.68988
G01 X-125.27564 Y97.68219
G01 X-125.19641 Y97.67436
G01 X-125.03962 Y97.65110
G01 X-124.95336 Y97.63390
G01 X-124.79654 Y97.59461
G01 X-124.78900 Y97.59232
G01 X-123.63688 Y97.59232
G01 X-123.09304 Y97.04846
G01 X-123.14117 Y97.02273
G01 X-123.21542 Y96.96179
G01 X-123.27635 Y96.88755
G01 X-123.32164 Y96.80284
G01 X-123.34953 Y96.71092
G01 X-123.35893 Y96.61531
G01 X-123.35893 Y96.14775
G01 X-123.32286 Y96.08671
G01 X-123.29093 Y96.00957
G01 X-123.23541 Y95.80609
G01 X-123.22525 Y95.72898
G01 X-123.21918 Y95.63673
G01 X-123.21918 Y94.91531
G01 X-123.21801 Y94.87467
G01 X-123.21595 Y94.85717
G01 X-123.18948 Y94.77104
G01 X-123.14564 Y94.69855
G01 X-123.08570 Y94.63861
G01 X-123.01321 Y94.59477
G01 X-122.92708 Y94.56830
G01 X-122.90958 Y94.56624
G01 X-122.86894 Y94.56507
G01 X-122.51476 Y94.56507
G01 X-122.46883 Y94.56358
G01 X-122.42992 Y94.56101
G01 X-122.28720 Y94.53721
G01 X-122.21006 Y94.51656
G01 X-121.99418 Y94.42532
G01 X-121.99030 Y94.42367
G01 X-121.98504 Y94.41613
G01 X-121.94648 Y94.34933
G01 X-121.91039 Y94.27193
G01 X-121.89027 Y94.19688
G01 X-121.91687 Y94.10437
G01 X-121.94880 Y94.02725
G01 X-122.05344 Y93.84407
G01 X-122.10079 Y93.78235
G01 X-122.16175 Y93.71280
G01 X-124.56606 Y91.30849
G01 X-124.58976 Y91.28360
G01 X-124.61287 Y91.25810
G01 X-124.63330 Y91.23056
G01 X-124.67157 Y91.17328
G01 X-124.68925 Y91.14380
G01 X-124.70391 Y91.11278
G01 X-124.73025 Y91.04918
G01 X-124.74183 Y91.01685
G01 X-124.75016 Y90.98352
G01 X-124.75697 Y90.95360
G01 X-124.76327 Y90.91829
G01 X-124.76825 Y90.88466
G01 X-124.77007 Y90.84773
G01 X-124.77091 Y90.81332
G01 X-124.77091 Y87.24754
G01 X-124.71724 Y87.13408
G01 X-124.69408 Y87.07830
G01 X-124.63797 Y86.92148
G01 X-124.62540 Y86.88018
G01 X-124.58613 Y86.72336
G01 X-124.57978 Y86.69158
G01 X-124.55651 Y86.53476
G01 X-124.55392 Y86.50845
G01 X-124.54622 Y86.35160
G01 X-124.54622 Y86.32704
G01 X-124.55392 Y86.17022
G01 X-124.55651 Y86.14391
G01 X-124.57978 Y85.98706
G01 X-124.58613 Y85.95529
G01 X-124.62540 Y85.79847
G01 X-124.63797 Y85.75717
G01 X-124.69408 Y85.60035
G01 X-124.71724 Y85.54457
G01 X-124.79144 Y85.38772
G01 X-124.83248 Y85.31117
G01 X-124.91092 Y85.18031
G01 X-124.93380 Y85.16806
G01 X-125.02255 Y85.13131
G01 X-125.17261 Y85.08579
G01 X-125.26685 Y85.06705
G01 X-125.31059 Y85.06273
G01 X-125.70960 Y84.66372
G01 X-125.76408 Y84.63464
G01 X-125.90274 Y84.55153
G01 X-125.97322 Y84.50446
G01 X-126.10058 Y84.41003
G01 X-126.15986 Y84.36141
G01 X-126.27619 Y84.25595
G01 X-126.32854 Y84.20360
G01 X-126.43400 Y84.08727
G01 X-126.48259 Y84.02801
G01 X-126.57703 Y83.90068
G01 X-126.62417 Y83.83007
G01 X-126.70728 Y83.69138
G01 X-126.73576 Y83.63987
G01 X-126.73863 Y83.63469
G01 X-126.74401 Y83.62931
G01 X-126.74091 Y83.61376
G01 X-126.74091 Y83.20901
G01 X-126.74749 Y83.19512
G01 X-126.79255 Y83.11069
G01 X-126.87566 Y82.97203
G01 X-126.92072 Y82.90452
G01 X-127.01518 Y82.77716
G01 X-127.06156 Y82.72060
G01 X-127.06603 Y82.71567
G01 X-127.21622 Y82.64465
G01 X-127.27195 Y82.62149
G01 X-127.42879 Y82.56538
G01 X-127.47007 Y82.55283
G01 X-127.62689 Y82.51354
G01 X-127.65866 Y82.50721
G01 X-127.81548 Y82.48394
G01 X-127.84180 Y82.48135
G01 X-127.99864 Y82.47363
G01 X-128.02321 Y82.47363
G01 X-128.18005 Y82.48135
G01 X-128.20636 Y82.48394
G01 X-128.36318 Y82.50721
G01 X-128.39496 Y82.51354
G01 X-128.55178 Y82.55283
G01 X-128.59305 Y82.56538
G01 X-128.74990 Y82.62149
G01 X-128.80563 Y82.64465
G01 X-128.91916 Y82.69835
G01 X-129.08294 Y82.69835
G01 X-129.10131 Y82.69857
G01 X-130.38914 Y82.69857
G01 X-130.43506 Y82.70010
G01 X-130.47397 Y82.70264
G01 X-130.61670 Y82.72644
G01 X-130.69381 Y82.74711
G01 X-130.82737 Y82.79487
G01 X-130.87936 Y82.86169
G01 X-130.88368 Y82.86784
G01 X-130.93115 Y82.92949
G01 X-130.93415 Y82.93304
G01 X-130.99823 Y83.02375
G01 X-131.00445 Y83.03256
G01 X-131.01560 Y83.07419
G01 X-131.02305 Y83.15925
G01 X-131.02305 Y83.23637
G01 X-131.01560 Y83.32146
G01 X-130.99351 Y83.40393
G01 X-130.95741 Y83.48133
G01 X-130.91886 Y83.54813
G01 X-130.86196 Y83.62232
G01 X-130.89993 Y83.62232
G01 X-130.91540 Y83.60685
G01 X-131.03664 Y83.50736
G01 X-131.04725 Y83.50025
G01 X-131.11649 Y83.45400
G01 X-131.25480 Y83.38006
G01 X-131.34354 Y83.34330
G01 X-131.49363 Y83.29779
G01 X-131.57636 Y83.28133
G01 X-131.74555 Y83.28133
G01 X-131.79193 Y83.28130
G01 X-132.63818 Y83.28130
G01 X-132.80737 Y83.28133
G01 X-132.89025 Y83.29779
G01 X-133.04031 Y83.34330
G01 X-133.12906 Y83.38006
G01 X-133.26737 Y83.45400
G01 X-133.34725 Y83.50736
G01 X-133.41298 Y83.56131
G01 X-133.45454 Y83.56131
G01 X-133.43478 Y83.54155
G01 X-133.43635 Y83.54000
G01 X-133.38664 Y83.49090
G01 X-133.34384 Y83.43662
G01 X-133.34123 Y83.43330
G01 X-133.29541 Y83.36375
G01 X-133.26203 Y83.28745
G01 X-133.24207 Y83.20657
G01 X-133.23000 Y83.13040
G01 X-133.22980 Y83.12872
G01 X-133.25378 Y83.08318
G01 X-133.30079 Y82.99870
G01 X-133.35362 Y82.91547
G01 X-133.39185 Y82.86248
G01 X-133.40016 Y82.85072
G01 X-133.43313 Y82.80315
G01 X-133.45487 Y82.77343
G01 X-133.52832 Y82.67838
G01 X-133.56772 Y82.62182
G01 X-133.57338 Y82.61277
G01 X-133.64105 Y82.48316
G01 X-133.65626 Y82.45217
G01 X-133.66742 Y82.41948
G01 X-133.71123 Y82.28003
G01 X-133.71362 Y82.26964
G01 X-133.72573 Y82.20178
G01 X-133.73859 Y82.10160
G01 X-133.74133 Y82.04572
G01 X-133.74133 Y81.97691
G01 X-133.73859 Y81.92106
G01 X-133.72573 Y81.82088
G01 X-133.71362 Y81.75303
G01 X-133.71123 Y81.74262
G01 X-133.66742 Y81.60315
G01 X-133.65626 Y81.57048
G01 X-133.64102 Y81.53945
G01 X-133.57341 Y81.40988
G01 X-133.56769 Y81.40081
G01 X-133.52832 Y81.34427
G01 X-133.46655 Y81.26434
G01 X-133.42901 Y81.22291
G01 X-133.38034 Y81.17424
G01 X-133.33892 Y81.13670
G01 X-133.25898 Y81.07496
G01 X-133.20239 Y81.03548
G01 X-133.19338 Y81.02985
G01 X-133.06373 Y80.96221
G01 X-133.03277 Y80.94699
G01 X-133.00008 Y80.93584
G01 X-132.86066 Y80.89203
G01 X-132.85025 Y80.88964
G01 X-132.78243 Y80.87755
G01 X-132.68217 Y80.86467
G01 X-132.62637 Y80.86193
G01 X-132.59190 Y80.86106
G01 X-132.20290 Y80.86106
G01 X-132.16356 Y80.85997
G01 X-132.13021 Y80.85809
G01 X-131.99510 Y80.83754
G01 X-131.91796 Y80.81842
G01 X-131.84862 Y80.79799
G01 X-131.79193 Y80.81966
G01 X-131.75454 Y80.83241
G01 X-131.70285 Y80.84808
G01 X-131.62731 Y80.86807
G01 X-131.60113 Y80.87447
G01 X-131.53684 Y80.88893
G01 X-131.53364 Y80.88964
G01 X-131.52320 Y80.89205
G01 X-131.38375 Y80.93584
G01 X-131.35106 Y80.94699
G01 X-131.32007 Y80.96221
G01 X-131.19048 Y81.02985
G01 X-131.18144 Y81.03551
G01 X-131.12490 Y81.07493
G01 X-131.04489 Y81.13673
G01 X-131.02627 Y81.15359
G01 X-131.00308 Y81.17371
G01 X-130.99130 Y81.18349
G01 X-130.96199 Y81.20919
G01 X-130.95078 Y81.21958
G01 X-130.88332 Y81.27506
G01 X-130.84103 Y81.28186
G01 X-130.76392 Y81.29200
G01 X-130.67169 Y81.29809
G01 X-126.76893 Y81.29809
G01 X-126.73449 Y81.29893
G01 X-126.70022 Y81.30061
G01 X-126.66618 Y81.30566
G01 X-126.59872 Y81.31908
G01 X-126.56540 Y81.32743
G01 X-126.53306 Y81.33901
G01 X-126.46946 Y81.36533
G01 X-126.46499 Y81.36744
G01 X-126.43845 Y81.38001
G01 X-126.40896 Y81.39766
G01 X-126.35168 Y81.43594
G01 X-126.32417 Y81.45636
G01 X-126.29865 Y81.47950
G01 X-126.27375 Y81.50320
G01 X-125.67266 Y82.10429
G01 X-125.66045 Y82.11623
G01 X-125.65003 Y82.12614
G01 X-125.56436 Y82.19586
G01 X-125.51696 Y82.22870
G01 X-125.50716 Y82.23033
G01 X-125.49616 Y82.23223
G01 X-125.43596 Y82.24313
G01 X-125.40251 Y82.24839
G01 X-125.35300 Y82.25494
G01 X-125.32407 Y82.25816
G01 X-125.29959 Y82.26037
G01 X-125.28021 Y82.26187
G01 X-125.20947 Y82.26632
G01 X-125.17414 Y82.26771
G01 X-125.09395 Y82.26904
G01 X-125.04625 Y82.26845
G01 X-124.95387 Y82.26472
G01 X-124.89791 Y82.26098
G01 X-124.87490 Y82.20952
G01 X-124.84295 Y82.13241
G01 X-124.78740 Y81.92883
G01 X-124.77724 Y81.85171
G01 X-124.77117 Y81.75949
G01 X-124.77117 Y78.71616
G01 X-124.77267 Y78.67024
G01 X-124.77523 Y78.63135
G01 X-124.79177 Y78.51791
G01 X-124.80909 Y78.49442
G01 X-124.85646 Y78.43270
G01 X-124.91742 Y78.36312
G01 X-125.06289 Y78.21768
G01 X-125.96606 Y77.31449
G01 X-125.98976 Y77.28959
G01 X-126.01287 Y77.26409
G01 X-126.03329 Y77.23656
G01 X-126.07157 Y77.17928
G01 X-126.08927 Y77.14977
G01 X-126.10088 Y77.12521
G01 X-126.10393 Y77.11878
G01 X-126.13027 Y77.05518
G01 X-126.14183 Y77.02284
G01 X-126.15018 Y76.98952
G01 X-126.16311 Y76.92523
G01 X-126.16359 Y76.92206
G01 X-126.16862 Y76.88805
G01 X-126.17033 Y76.85376
G01 X-126.17116 Y76.81931
G01 X-126.17116 Y74.78947
G01 X-126.17678 Y74.70083
G01 X-126.18618 Y74.62661
G01 X-126.23085 Y74.44827
G01 X-126.25054 Y74.43961
G01 X-126.27091 Y74.43093
G01 X-126.32593 Y74.40507
G01 X-126.41130 Y74.36092
G01 X-126.49976 Y74.30654
G01 X-126.53553 Y74.28074
G01 X-126.56525 Y74.25813
G01 X-126.69877 Y74.15120
G01 X-126.75463 Y74.10248
G01 X-126.76093 Y74.03832
G01 X-126.76090 Y73.54815
G01 X-126.75912 Y73.53606
G01 X-126.74975 Y73.44132
G01 X-126.74205 Y73.28450
G01 X-126.74205 Y73.19217
G01 X-126.74975 Y73.03532
G01 X-126.75912 Y72.94056
G01 X-126.76090 Y72.92846
G01 X-126.76093 Y72.43832
G01 X-126.75496 Y72.37769
G01 X-126.64355 Y72.27911
G01 X-126.57840 Y72.22684
G01 X-126.49984 Y72.17015
G01 X-126.41518 Y72.11777
G01 X-126.32910 Y72.09131
G01 X-126.31163 Y72.08927
G01 X-126.27094 Y72.08808
G01 X-124.67094 Y72.08808
G01 X-124.63022 Y72.08927
G01 X-124.61275 Y72.09131
G01 X-124.52667 Y72.11775
G01 X-124.45412 Y72.16161
G01 X-124.39421 Y72.22151
G01 X-124.35280 Y72.28945
G01 X-124.33657 Y72.32181
G01 X-124.29022 Y72.43060
G01 X-124.28694 Y72.43835
G01 X-124.25824 Y72.50769
G01 X-124.25349 Y72.51889
G01 X-124.06126 Y72.56984
G01 X-123.98415 Y72.58000
G01 X-123.89192 Y72.58607
G01 X-123.64884 Y72.58607
G01 X-123.63160 Y72.58587
G01 X-123.61661 Y72.58549
G01 X-123.50533 Y72.57393
G01 X-123.42819 Y72.55978
G01 X-123.28557 Y72.51968
G01 X-123.25936 Y72.45470
G01 X-123.25281 Y72.43634
G01 X-123.24356 Y72.41165
G01 X-123.21344 Y72.34239
G01 X-123.20411 Y72.32156
G01 X-123.14564 Y72.21955
G01 X-123.08570 Y72.15961
G01 X-123.01321 Y72.11577
G01 X-122.92708 Y72.08930
G01 X-122.90958 Y72.08724
G01 X-122.86894 Y72.08607
G01 X-121.16894 Y72.08607
G01 X-121.12827 Y72.08724
G01 X-121.11077 Y72.08930
G01 X-121.02464 Y72.11577
G01 X-121.01593 Y72.12041
G01 X-120.91692 Y72.43631
G01 X-120.91692 Y74.13631
G01 X-121.01593 Y74.45224
G01 X-121.02457 Y74.45686
G01 X-121.11082 Y74.48338
G01 X-121.12825 Y74.48541
G01 X-121.16894 Y74.48658
G01 X-122.86894 Y74.48658
G01 X-122.90958 Y74.48541
G01 X-122.92708 Y74.48335
G01 X-123.01321 Y74.45688
G01 X-123.06098 Y74.42935
G01 X-123.08570 Y74.41307
G01 X-123.14564 Y74.35310
G01 X-123.20251 Y74.25447
G01 X-123.20452 Y74.24980
G01 X-123.25019 Y74.14172
G01 X-123.25242 Y74.13631
G01 X-123.28214 Y74.06461
G01 X-123.28661 Y74.05401
G01 X-123.47948 Y74.00281
G01 X-123.55659 Y73.99265
G01 X-123.64884 Y73.98658
G01 X-123.94877 Y73.98658
G01 X-124.03741 Y73.99219
G01 X-124.11166 Y74.00159
G01 X-124.26865 Y74.03860
G01 X-124.28763 Y74.07746
G01 X-124.32664 Y74.14815
G01 X-124.37604 Y74.22745
G01 X-124.39421 Y74.25511
G01 X-124.45415 Y74.31505
G01 X-124.53053 Y74.36092
G01 X-124.61242 Y74.40324
G01 X-124.67094 Y74.43057
G01 X-124.68468 Y74.43636
G01 X-124.71122 Y74.44802
G01 X-124.75445 Y74.62013
G01 X-124.76459 Y74.69724
G01 X-124.77068 Y74.78947
G01 X-124.77068 Y76.32249
G01 X-124.76916 Y76.36841
G01 X-124.76662 Y76.40733
G01 X-124.75006 Y76.52076
G01 X-124.73276 Y76.54423
G01 X-124.68539 Y76.60595
G01 X-124.62446 Y76.67550
G01 X-123.57577 Y77.72421
G01 X-123.55207 Y77.74908
G01 X-123.52895 Y77.77458
G01 X-123.50853 Y77.80212
G01 X-123.47026 Y77.85939
G01 X-123.45260 Y77.88883
G01 X-123.43792 Y77.91989
G01 X-123.41158 Y77.98350
G01 X-123.40002 Y78.01581
G01 X-123.39167 Y78.04918
G01 X-123.37826 Y78.11659
G01 X-123.37320 Y78.15063
G01 X-123.37153 Y78.18487
G01 X-123.37066 Y78.21931
G01 X-123.37066 Y80.68849
G01 X-123.37008 Y80.71750
G01 X-123.36906 Y80.74209
G01 X-123.35314 Y80.86538
G01 X-123.33642 Y80.94249
G01 X-123.25639 Y81.16129
G01 X-123.23091 Y81.21074
G01 X-123.22197 Y81.21715
G01 X-123.20216 Y81.21809
G01 X-123.19566 Y81.21847
G01 X-123.02045 Y81.21361
G01 X-122.96020 Y81.20620
G01 X-122.94227 Y81.20422
G01 X-122.88194 Y81.19822
G01 X-122.78895 Y81.18283
G01 X-122.78512 Y81.18194
G01 X-122.71742 Y81.16957
G01 X-122.62195 Y81.15690
G01 X-122.56139 Y81.15392
G01 X-122.49248 Y81.15392
G01 X-122.43190 Y81.15690
G01 X-122.33642 Y81.16957
G01 X-122.26873 Y81.18194
G01 X-122.26325 Y81.18324
G01 X-122.24440 Y81.18763
G01 X-122.20470 Y81.20048
G01 X-122.11887 Y81.22819
G01 X-122.06414 Y81.24844
G01 X-122.05466 Y81.25344
G01 X-121.91656 Y81.32771
G01 X-121.89675 Y81.33879
G01 X-121.85956 Y81.36655
G01 X-121.75126 Y81.45311
G01 X-121.73691 Y81.46429
G01 X-121.73201 Y81.46800
G01 X-121.71580 Y81.48064
G01 X-121.68161 Y81.50815
G01 X-121.64689 Y81.53447
G01 X-121.61222 Y81.53985
G01 X-121.53511 Y81.55001
G01 X-121.44288 Y81.55608
G01 X-120.04588 Y81.55608
G01 X-119.99998 Y81.55458
G01 X-119.96107 Y81.55202
G01 X-119.82680 Y81.53045
G01 X-119.82015 Y81.52489
G01 X-119.76038 Y81.47417
G01 X-119.71489 Y81.43211
G01 X-119.69287 Y81.40986
G01 X-119.66572 Y81.38390
G01 X-119.62139 Y81.34371
G01 X-119.53676 Y81.27833
G01 X-119.48017 Y81.23891
G01 X-119.46950 Y81.23221
G01 X-119.33293 Y81.16093
G01 X-119.30194 Y81.14572
G01 X-119.26925 Y81.13457
G01 X-119.12231 Y81.08842
G01 X-119.10996 Y81.08560
G01 X-119.04215 Y81.07348
G01 X-118.93610 Y81.05987
G01 X-118.87633 Y81.05692
G01 X-118.84194 Y81.05608
G01 X-118.67126 Y81.05608
G01 X-118.59193 Y81.08895
G01 X-118.56196 Y81.10221
G01 X-118.40199 Y81.17788
G01 X-118.35886 Y81.20089
G01 X-118.21152 Y81.28920
G01 X-118.18053 Y81.30988
G01 X-118.04522 Y81.41024
G01 X-118.02137 Y81.42979
G01 X-117.89775 Y81.54183
G01 X-117.87743 Y81.56215
G01 X-117.76539 Y81.68578
G01 X-117.74583 Y81.70963
G01 X-117.64548 Y81.84493
G01 X-117.62480 Y81.87589
G01 X-117.53651 Y82.02321
G01 X-117.51347 Y82.06637
G01 X-117.49760 Y82.10000
G01 X-117.48513 Y82.12474
G01 X-117.43115 Y82.22570
G01 X-117.40087 Y82.28991
G01 X-117.39338 Y82.30802
G01 X-117.39546 Y82.35049
G01 X-117.40908 Y82.45654
G01 X-117.42119 Y82.52441
G01 X-117.42401 Y82.53673
G01 X-117.45358 Y82.63083
G01 X-117.47017 Y82.68366
G01 X-117.48132 Y82.71633
G01 X-117.49653 Y82.74732
G01 X-117.56780 Y82.88389
G01 X-117.57451 Y82.89459
G01 X-117.61393 Y82.95118
G01 X-117.67931 Y83.03576
G01 X-117.71949 Y83.08011
G01 X-117.76813 Y83.12875
G01 X-117.79328 Y83.15153
G01 X-117.85868 Y83.21917
G01 X-117.88449 Y83.24963
G01 X-117.91025 Y83.27846
G01 X-117.93631 Y83.30619
G01 X-118.04738 Y83.45194
G01 X-118.05721 Y83.46776
G01 X-118.07052 Y83.48818
G01 X-118.07240 Y83.49108
G01 X-118.07240 Y83.52156
G01 X-118.07052 Y83.52440
G01 X-118.07052 Y83.52443
G01 X-118.05721 Y83.54490
G01 X-118.04733 Y83.56075
G01 X-117.93628 Y83.70650
G01 X-117.91030 Y83.73416
G01 X-117.88454 Y83.76301
G01 X-117.85871 Y83.79344
G01 X-117.79325 Y83.86116
G01 X-117.76818 Y83.88387
G01 X-117.71949 Y83.93253
G01 X-117.67928 Y83.97691
G01 X-117.61393 Y84.06149
G01 X-117.57451 Y84.11808
G01 X-117.56780 Y84.12875
G01 X-117.49653 Y84.26532
G01 X-117.48132 Y84.29631
G01 X-117.47017 Y84.32900
G01 X-117.42401 Y84.47594
G01 X-117.42119 Y84.48828
G01 X-117.40908 Y84.55610
G01 X-117.39546 Y84.66215
G01 X-117.39252 Y84.72191
G01 X-117.39252 Y84.79072
G01 X-117.39546 Y84.85051
G01 X-117.40908 Y84.95653
G01 X-117.42119 Y85.02438
G01 X-117.42401 Y85.03675
G01 X-117.47017 Y85.18366
G01 X-117.48132 Y85.21635
G01 X-117.49656 Y85.24734
G01 X-117.56780 Y85.38389
G01 X-117.57451 Y85.39458
G01 X-117.61393 Y85.45117
G01 X-117.67593 Y85.53141
G01 X-117.71352 Y85.58498
G01 X-117.72340 Y85.60052
G01 X-117.75437 Y85.64553
G01 X-117.76399 Y85.65846
G01 X-117.84659 Y85.79580
G01 X-117.87260 Y85.84957
G01 X-117.89231 Y85.88841
G01 X-117.89882 Y85.90060
G01 X-117.93433 Y85.91962
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.89653 Y85.92333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.89653 Y85.92333
G01 X-117.89882 Y85.90060
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-118.07052 Y83.52440 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-118.07052 Y83.52440
G01 X-118.11426 Y83.50632
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.31956 Y83.50632 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.31956 Y83.50632
G01 X-119.39820 Y83.53888
G01 X-119.54517 Y83.61742
G01 X-119.62503 Y83.67079
G01 X-119.75383 Y83.77650
G01 X-119.82175 Y83.84442
G01 X-119.88075 Y83.91633
G01 X-121.63295 Y83.91633
G01 X-121.65040 Y83.89885
G01 X-121.74852 Y83.81833
G01 X-121.77163 Y83.79936
G01 X-121.85149 Y83.74599
G01 X-121.98982 Y83.67206
G01 X-122.07854 Y83.63530
G01 X-122.22863 Y83.58978
G01 X-122.31135 Y83.57333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.74237 Y83.57333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.74237 Y83.57333
G01 X-122.82525 Y83.55684
G01 X-122.97534 Y83.51132
G01 X-123.06406 Y83.47457
G01 X-123.20239 Y83.40063
G01 X-123.23094 Y83.38156
G01 X-123.26231 Y83.32301
G01 X-123.33650 Y83.16619
G01 X-123.36655 Y83.09382
G01 X-123.42266 Y82.93700
G01 X-123.43993 Y82.88024
G01 X-123.47920 Y82.72342
G01 X-123.48847 Y82.67693
G01 X-123.51173 Y82.52011
G01 X-123.51575 Y82.47953
G01 X-123.52344 Y82.32268
G01 X-123.52344 Y82.28392
G01 X-123.51572 Y82.12713
G01 X-123.51173 Y82.08654
G01 X-123.48847 Y81.92972
G01 X-123.47920 Y81.88323
G01 X-123.43993 Y81.72642
G01 X-123.42266 Y81.66965
G01 X-123.36655 Y81.51283
G01 X-123.33650 Y81.44046
G01 X-123.26231 Y81.28364
G01 X-123.23259 Y81.22619
G01 X-123.23094 Y81.22299
G01 X-123.23091 Y81.21074
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-123.23259 Y81.22619 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-123.23259 Y81.22619
G01 X-123.21925 Y81.21727
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.69877 Y74.15120 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.69877 Y74.15120
G01 X-126.75463 Y74.10245
G01 X-126.75572 Y74.10151
G01 X-126.77406 Y74.10083
G01 X-126.85940 Y74.10507
G01 X-126.94269 Y74.12407
G01 X-127.02140 Y74.15727
G01 X-127.08960 Y74.19331
G01 X-127.17091 Y74.25097
G01 X-127.17091 Y74.21274
G01 X-127.13441 Y74.18277
G01 X-127.07355 Y74.12193
G01 X-127.06649 Y74.11485
G01 X-126.96700 Y73.99361
G01 X-126.91363 Y73.91376
G01 X-126.83969 Y73.77545
G01 X-126.80294 Y73.68671
G01 X-126.76090 Y73.54815
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.76090 Y72.92846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.76090 Y72.92846
G01 X-126.80294 Y72.78993
G01 X-126.83969 Y72.70119
G01 X-126.91363 Y72.56288
G01 X-126.96700 Y72.48300
G01 X-127.06649 Y72.36177
G01 X-127.13441 Y72.29385
G01 X-127.17091 Y72.26390
G01 X-127.17091 Y72.22821
G01 X-127.14759 Y72.24731
G01 X-127.11813 Y72.26860
G01 X-127.03710 Y72.31605
G01 X-126.94853 Y72.34716
G01 X-126.87365 Y72.36563
G01 X-126.78922 Y72.37876
G01 X-126.75541 Y72.37810
G01 X-126.75496 Y72.37769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-128.85094 Y72.23070 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-128.85094 Y72.23070
G01 X-128.97390 Y72.34480
G01 X-129.01660 Y72.39832
G01 X-128.98538 Y72.39832
G01 X-128.95539 Y72.36177
G01 X-128.88747 Y72.29385
G01 X-128.85094 Y72.26387
G01 X-128.85094 Y72.23070
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-128.85094 Y74.21276 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-128.85094 Y74.21276
G01 X-128.88747 Y74.18277
G01 X-128.95539 Y74.11485
G01 X-128.98536 Y74.07832
G01 X-129.01657 Y74.07832
G01 X-128.97390 Y74.13184
G01 X-128.85094 Y74.24594
G01 X-128.85094 Y74.21276
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.42526 Y75.41731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.42526 Y75.41731
G01 X-130.43402 Y75.30037
G01 X-130.45592 Y75.32229
G01 X-130.45129 Y75.36928
G01 X-130.45129 Y75.46534
G01 X-130.45594 Y75.51236
G01 X-130.43402 Y75.53428
G01 X-130.42526 Y75.41731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.62000 Y74.11045 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.62000 Y74.11045
G01 X-131.64075 Y74.10733
G01 X-131.83709 Y74.10733
G01 X-131.85784 Y74.11045
G01 X-131.83399 Y74.13430
G01 X-131.78698 Y74.12968
G01 X-131.69091 Y74.12968
G01 X-131.64385 Y74.13430
G01 X-131.62000 Y74.11045
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.02195 Y75.32224 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.02195 Y75.32224
G01 X-133.02657 Y75.36928
G01 X-133.02657 Y75.46534
G01 X-133.02195 Y75.51241
G01 X-133.04385 Y75.53430
G01 X-133.05261 Y75.41731
G01 X-133.04385 Y75.30034
G01 X-133.02195 Y75.32224
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.40288 Y76.94131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.40288 Y76.94131
G01 X-131.64385 Y77.18230
G01 X-131.69091 Y77.17768
G01 X-131.78698 Y77.17768
G01 X-131.83399 Y77.18230
G01 X-132.07499 Y76.94133
G01 X-131.83399 Y76.70031
G01 X-131.78698 Y76.70496
G01 X-131.69091 Y76.70496
G01 X-131.64387 Y76.70031
G01 X-131.40288 Y76.94131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.02195 Y78.37029 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.02195 Y78.37029
G01 X-133.04385 Y78.34837
G01 X-133.05261 Y78.46533
G01 X-133.04385 Y78.58230
G01 X-133.02195 Y78.56041
G01 X-133.02657 Y78.51337
G01 X-133.02657 Y78.41728
G01 X-133.02195 Y78.37029
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.42526 Y78.46533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.42526 Y78.46533
G01 X-130.43402 Y78.58228
G01 X-130.45594 Y78.56036
G01 X-130.45129 Y78.51337
G01 X-130.45129 Y78.41728
G01 X-130.45592 Y78.37029
G01 X-130.43402 Y78.34837
G01 X-130.42526 Y78.46533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.61642 Y79.77580 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.61642 Y79.77580
G01 X-131.64387 Y79.74831
G01 X-131.69091 Y79.75296
G01 X-131.78698 Y79.75296
G01 X-131.83399 Y79.74831
G01 X-131.89333 Y79.80767
G01 X-131.83303 Y79.84555
G01 X-131.80803 Y79.86449
G01 X-131.79988 Y79.85852
G01 X-131.72216 Y79.81237
G01 X-131.63727 Y79.78128
G01 X-131.61642 Y79.77580
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.99823 Y83.02375 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.99823 Y83.02375
G01 X-131.03664 Y83.05527
G01 X-131.11649 Y83.10863
G01 X-131.25480 Y83.18255
G01 X-131.34354 Y83.21933
G01 X-131.49363 Y83.26484
G01 X-131.57636 Y83.28133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.80737 Y83.28133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.80737 Y83.28133
G01 X-132.89025 Y83.26484
G01 X-133.04031 Y83.21933
G01 X-133.12906 Y83.18255
G01 X-133.22980 Y83.12872
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.39713 Y86.08831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.39713 Y86.08831
G01 X-133.38885 Y86.07662
G01 X-133.37432 Y86.02237
G01 X-133.36688 Y85.93728
G01 X-133.36688 Y85.86016
G01 X-133.37432 Y85.77510
G01 X-133.39642 Y85.69263
G01 X-133.43252 Y85.61523
G01 X-133.47107 Y85.54843
G01 X-133.47651 Y85.54132
G01 X-133.41298 Y85.54132
G01 X-133.34725 Y85.59527
G01 X-133.33836 Y85.60121
G01 X-133.26737 Y85.64863
G01 X-133.12906 Y85.72255
G01 X-133.04031 Y85.75933
G01 X-132.89025 Y85.80484
G01 X-132.80737 Y85.82133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.57636 Y85.82133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.57636 Y85.82133
G01 X-131.49363 Y85.83779
G01 X-131.34354 Y85.88330
G01 X-131.25480 Y85.92006
G01 X-131.11649 Y85.99400
G01 X-131.03664 Y86.04736
G01 X-130.97743 Y86.09595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.90186 Y88.34131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.90186 Y88.34131
G01 X-133.39193 Y88.34131
G01 X-133.48753 Y88.35074
G01 X-133.57946 Y88.37862
G01 X-133.66416 Y88.42389
G01 X-133.73841 Y88.48482
G01 X-133.79937 Y88.55909
G01 X-133.84463 Y88.64380
G01 X-133.87252 Y88.73572
G01 X-133.88194 Y88.83130
G01 X-133.88194 Y90.43130
G01 X-133.87252 Y90.52691
G01 X-133.84463 Y90.61883
G01 X-133.79937 Y90.70354
G01 X-133.73841 Y90.77781
G01 X-133.66416 Y90.83874
G01 X-133.57946 Y90.88400
G01 X-133.48753 Y90.91189
G01 X-133.39193 Y90.92132
G01 X-133.21146 Y90.92132
G01 X-133.19663 Y90.91316
G01 X-132.97176 Y90.82365
G01 X-132.89462 Y90.80468
G01 X-132.76023 Y90.78444
G01 X-132.72744 Y90.78263
G01 X-132.68880 Y90.78157
G01 X-130.99193 Y90.78157
G01 X-130.95124 Y90.78040
G01 X-130.93369 Y90.77834
G01 X-130.84763 Y90.75187
G01 X-130.77512 Y90.70803
G01 X-130.71520 Y90.64811
G01 X-130.67136 Y90.57560
G01 X-130.64863 Y90.50443
G01 X-130.64489 Y90.48949
G01 X-130.64283 Y90.47197
G01 X-130.64167 Y90.43130
G01 X-130.64167 Y88.83130
G01 X-130.64283 Y88.79066
G01 X-130.64489 Y88.77319
G01 X-130.67136 Y88.68706
G01 X-130.72912 Y88.59508
G01 X-130.77057 Y88.54352
G01 X-130.79673 Y88.51517
G01 X-130.96275 Y88.34418
G01 X-130.96275 Y88.34416
G01 X-130.99193 Y88.34131
G01 X-131.48195 Y88.34131
G01 X-131.49419 Y88.34312
G01 X-131.58893 Y88.35249
G01 X-131.74575 Y88.36018
G01 X-131.79193 Y88.36130
G01 X-132.59190 Y88.36130
G01 X-132.63808 Y88.36018
G01 X-132.79493 Y88.35249
G01 X-132.88969 Y88.34312
G01 X-132.90186 Y88.34131
G01 X-133.04031 Y88.29933
G01 X-133.12906 Y88.26255
G01 X-133.26737 Y88.18863
G01 X-133.34725 Y88.13527
G01 X-133.46848 Y88.03578
G01 X-133.53640 Y87.96786
G01 X-133.94494 Y88.37626
G01 X-133.94494 Y91.02068
G01 X-133.93691 Y91.02068
G01 X-133.78083 Y91.03605
G01 X-133.68662 Y91.05479
G01 X-133.53655 Y91.10031
G01 X-133.44781 Y91.13706
G01 X-133.31870 Y91.20608
G01 X-133.31377 Y91.21644
G01 X-133.31309 Y91.21766
G01 X-133.27272 Y91.29533
G01 X-133.26632 Y91.30907
G01 X-133.18167 Y91.45314
G01 X-133.15931 Y91.48360
G01 X-133.13902 Y91.51268
G01 X-133.12810 Y91.52916
G01 X-133.09033 Y91.58380
G01 X-133.08591 Y91.58959
G01 X-133.04819 Y91.64100
G01 X-133.01027 Y91.69840
G01 X-132.97326 Y91.76084
G01 X-132.93640 Y91.83676
G01 X-132.90938 Y91.90013
G01 X-132.89660 Y91.93470
G01 X-132.86442 Y92.05040
G01 X-132.86246 Y92.05764
G01 X-132.84923 Y92.11771
G01 X-132.84905 Y92.11877
G01 X-132.83498 Y92.27387
G01 X-132.83272 Y92.30833
G01 X-132.83498 Y92.34278
G01 X-132.84905 Y92.49789
G01 X-132.84923 Y92.49896
G01 X-132.86442 Y92.56627
G01 X-132.89660 Y92.68194
G01 X-132.90938 Y92.71651
G01 X-132.93640 Y92.77989
G01 X-132.97326 Y92.85581
G01 X-133.01027 Y92.91824
G01 X-133.04819 Y92.97564
G01 X-133.07704 Y93.01496
G01 X-133.14801 Y93.09660
G01 X-133.19574 Y93.14636
G01 X-133.20521 Y93.15530
G01 X-133.31758 Y93.24511
G01 X-133.35477 Y93.27285
G01 X-133.37453 Y93.28390
G01 X-133.51265 Y93.35819
G01 X-133.52220 Y93.36325
G01 X-133.57686 Y93.38347
G01 X-133.70239 Y93.42403
G01 X-133.72670 Y93.42972
G01 X-133.79447 Y93.44211
G01 X-133.88992 Y93.45476
G01 X-133.95052 Y93.45774
G01 X-134.01933 Y93.45774
G01 X-134.07994 Y93.45476
G01 X-134.17536 Y93.44211
G01 X-134.24311 Y93.42972
G01 X-134.26744 Y93.42403
G01 X-134.39297 Y93.38347
G01 X-134.44763 Y93.36325
G01 X-134.45720 Y93.35819
G01 X-134.59533 Y93.28390
G01 X-134.61509 Y93.27285
G01 X-134.64486 Y93.25095
G01 X-134.65228 Y93.24511
G01 X-134.76462 Y93.15530
G01 X-134.77412 Y93.14633
G01 X-134.82185 Y93.09660
G01 X-134.89281 Y93.01496
G01 X-134.92167 Y92.97564
G01 X-134.95961 Y92.91819
G01 X-134.99657 Y92.85583
G01 X-135.01702 Y92.81372
G01 X-135.03345 Y92.77986
G01 X-135.05149 Y92.73960
G01 X-135.06086 Y92.71669
G01 X-135.06629 Y92.70381
G01 X-135.07943 Y92.67354
G01 X-135.13173 Y92.57432
G01 X-135.14697 Y92.54999
G01 X-135.17366 Y92.50419
G01 X-135.18796 Y92.47783
G01 X-135.26647 Y92.35573
G01 X-135.27257 Y92.34755
G01 X-135.27257 Y92.26028
G01 X-135.26795 Y92.21324
G01 X-135.37889 Y92.10229
G01 X-135.41120 Y92.06665
G01 X-135.45471 Y92.01362
G01 X-135.50808 Y91.93376
G01 X-135.54044 Y91.87326
G01 X-135.57719 Y91.78451
G01 X-135.59710 Y91.71885
G01 X-135.61585 Y91.62464
G01 X-135.62225 Y91.55959
G01 X-135.62177 Y91.55860
G01 X-135.62057 Y91.55619
G01 X-135.59926 Y91.50831
G01 X-135.58890 Y91.48421
G01 X-135.55695 Y91.40709
G01 X-135.50140 Y91.20351
G01 X-135.49124 Y91.12640
G01 X-135.48517 Y91.03417
G01 X-135.48517 Y88.02831
G01 X-135.48433 Y87.99387
G01 X-135.48263 Y87.95960
G01 X-135.47760 Y87.92559
G01 X-135.46419 Y87.85815
G01 X-135.45583 Y87.82480
G01 X-135.44427 Y87.79249
G01 X-135.41793 Y87.72889
G01 X-135.40323 Y87.69785
G01 X-135.38560 Y87.66839
G01 X-135.34732 Y87.61111
G01 X-135.32687 Y87.58355
G01 X-135.30378 Y87.55808
G01 X-135.28006 Y87.53319
G01 X-134.41621 Y86.66931
G01 X-134.34306 Y86.59618
G01 X-134.31816 Y86.57246
G01 X-134.29269 Y86.54937
G01 X-134.26513 Y86.52892
G01 X-134.21910 Y86.49755
G01 X-134.20785 Y86.49064
G01 X-134.17834 Y86.47296
G01 X-134.14735 Y86.45831
G01 X-134.08375 Y86.43197
G01 X-134.05154 Y86.42046
G01 X-134.04735 Y86.41940
G01 X-134.04709 Y86.41934
G01 X-134.01809 Y86.41208
G01 X-133.95065 Y86.39864
G01 X-133.90272 Y86.39153
G01 X-133.89127 Y86.38975
G01 X-133.88166 Y86.38815
G01 X-133.84791 Y86.38264
G01 X-133.77509 Y86.36692
G01 X-133.69795 Y86.34627
G01 X-133.54773 Y86.29072
G01 X-133.50773 Y86.23829
G01 X-133.50252 Y86.23090
G01 X-133.45494 Y86.16928
G01 X-133.45248 Y86.16639
G01 X-133.39716 Y86.08833
G01 X-133.39713 Y86.08831
G01 X-133.34725 Y86.04736
G01 X-133.26737 Y85.99400
G01 X-133.12906 Y85.92006
G01 X-133.04031 Y85.88330
G01 X-132.89025 Y85.83779
G01 X-132.80737 Y85.82133
G01 X-131.57636 Y85.82133
G01 X-131.49363 Y85.80484
G01 X-131.34354 Y85.75933
G01 X-131.25480 Y85.72255
G01 X-131.11649 Y85.64863
G01 X-131.03664 Y85.59527
G01 X-130.91540 Y85.49578
G01 X-130.84748 Y85.42786
G01 X-130.81789 Y85.39181
G01 X-130.78568 Y85.39186
G01 X-130.80491 Y85.41693
G01 X-130.82797 Y85.43997
G01 X-130.87027 Y85.48823
G01 X-130.89394 Y85.51909
G01 X-130.94464 Y85.60063
G01 X-130.96615 Y85.65780
G01 X-130.97844 Y85.69049
G01 X-130.99841 Y85.76499
G01 X-131.01324 Y85.84911
G01 X-131.01324 Y85.93453
G01 X-130.99841 Y86.01866
G01 X-130.97844 Y86.09316
G01 X-130.97743 Y86.09595
G01 X-130.92937 Y86.16390
G01 X-130.87339 Y86.23606
G01 X-130.83313 Y86.28442
G01 X-130.82617 Y86.28734
G01 X-130.74906 Y86.31929
G01 X-130.54548 Y86.37484
G01 X-130.46836 Y86.38500
G01 X-130.37613 Y86.39107
G01 X-129.59917 Y86.39107
G01 X-129.55089 Y86.38942
G01 X-129.50997 Y86.38660
G01 X-129.36410 Y86.36148
G01 X-129.28696 Y86.34022
G01 X-129.22965 Y86.32224
G01 X-129.21807 Y86.29923
G01 X-129.16819 Y86.17700
G01 X-129.15892 Y86.14749
G01 X-129.14324 Y86.10261
G01 X-129.13466 Y86.08043
G01 X-129.11297 Y86.01503
G01 X-129.09925 Y85.96573
G01 X-129.08647 Y85.93116
G01 X-129.05945 Y85.86776
G01 X-129.02257 Y85.79184
G01 X-128.98559 Y85.72940
G01 X-128.94766 Y85.67200
G01 X-128.91881 Y85.63268
G01 X-128.84784 Y85.55105
G01 X-128.80011 Y85.50131
G01 X-128.79062 Y85.49235
G01 X-128.73590 Y85.44861
G01 X-128.69440 Y85.41272
G01 X-128.68056 Y85.39976
G01 X-128.66024 Y85.38148
G01 X-128.62712 Y85.35277
G01 X-128.54391 Y85.26880
G01 X-128.51330 Y85.23309
G01 X-128.48932 Y85.20619
G01 X-128.44965 Y85.16339
G01 X-128.40931 Y85.11208
G01 X-128.40527 Y85.05811
G01 X-128.41376 Y84.97314
G01 X-128.42808 Y84.89735
G01 X-128.45122 Y84.81506
G01 X-128.48830 Y84.73804
G01 X-128.53822 Y84.66865
G01 X-128.58853 Y84.61020
G01 X-128.68381 Y84.52506
G01 X-128.82996 Y84.42539
G01 X-128.87774 Y84.38107
G01 X-128.86110 Y84.36443
G01 X-128.76626 Y84.44226
G01 X-128.68637 Y84.49562
G01 X-128.54807 Y84.56956
G01 X-128.45932 Y84.60632
G01 X-128.33001 Y84.64554
G01 X-128.30926 Y84.65183
G01 X-128.21503 Y84.67058
G01 X-128.06369 Y84.68549
G01 X-127.64195 Y85.10723
G01 X-127.56852 Y85.15125
G01 X-127.49209 Y85.20228
G01 X-127.36476 Y85.29672
G01 X-127.30019 Y85.34967
G01 X-127.18384 Y85.45511
G01 X-127.12671 Y85.51223
G01 X-127.02128 Y85.62859
G01 X-126.96834 Y85.69311
G01 X-126.87391 Y85.82044
G01 X-126.82280 Y85.89699
G01 X-126.77881 Y85.97037
G01 X-126.72067 Y86.02851
G01 X-126.72448 Y86.04101
G01 X-126.74091 Y86.12374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.91092 Y85.18031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.91092 Y85.18031
G01 X-124.91089 Y84.55732
G01 X-124.83248 Y84.42649
G01 X-124.79144 Y84.34993
G01 X-124.71724 Y84.19309
G01 X-124.69408 Y84.13731
G01 X-124.63797 Y83.98049
G01 X-124.62540 Y83.93919
G01 X-124.58613 Y83.78237
G01 X-124.57978 Y83.75059
G01 X-124.55651 Y83.59375
G01 X-124.55392 Y83.56743
G01 X-124.54622 Y83.41061
G01 X-124.54622 Y83.38605
G01 X-124.55392 Y83.22921
G01 X-124.55651 Y83.20289
G01 X-124.57978 Y83.04607
G01 X-124.58613 Y83.01430
G01 X-124.62540 Y82.85745
G01 X-124.63797 Y82.81615
G01 X-124.69408 Y82.65933
G01 X-124.71724 Y82.60358
G01 X-124.79144 Y82.44673
G01 X-124.83246 Y82.37023
G01 X-124.89791 Y82.26098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-123.23094 Y83.38156 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-123.23094 Y83.38156
G01 X-123.23091 Y83.76507
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.91089 Y84.55732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.91089 Y84.55732
G01 X-124.93380 Y84.56956
G01 X-125.02255 Y84.60632
G01 X-125.17261 Y84.65183
G01 X-125.26685 Y84.67058
G01 X-125.42291 Y84.68595
G01 X-125.51897 Y84.68595
G01 X-125.67503 Y84.67058
G01 X-125.70960 Y84.66372
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.73576 Y83.63987 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.73576 Y83.63987
G01 X-126.74091 Y83.61376
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.74091 Y83.60218 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.74091 Y83.60218
G01 X-126.74094 Y83.44462
G01 X-126.74094 Y83.35207
G01 X-126.74091 Y83.20901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-128.41350 Y85.11742 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-128.41350 Y85.11742
G01 X-128.30926 Y85.08579
G01 X-128.21503 Y85.06705
G01 X-128.05897 Y85.05168
G01 X-127.96291 Y85.05168
G01 X-127.80685 Y85.06705
G01 X-127.71261 Y85.08579
G01 X-127.64195 Y85.10723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.77881 Y85.97037 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.77881 Y85.97037
G01 X-126.75740 Y86.04101
G01 X-126.74091 Y86.12374
G01 X-126.74091 Y86.55475
G01 X-126.75740 Y86.63763
G01 X-126.80294 Y86.78770
G01 X-126.83969 Y86.87644
G01 X-126.89245 Y86.97517
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-126.74091 Y86.55475 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-126.74091 Y86.55475
G01 X-126.72448 Y86.63763
G01 X-126.67894 Y86.78770
G01 X-126.64218 Y86.87644
G01 X-126.56824 Y87.01475
G01 X-126.51488 Y87.09463
G01 X-126.41539 Y87.21586
G01 X-126.34747 Y87.28378
G01 X-126.31094 Y87.31375
G01 X-126.31094 Y87.34695
G01 X-126.43393 Y87.23286
G01 X-126.45374 Y87.20799
G01 X-126.54350 Y87.12102
G01 X-126.58617 Y87.08912
G01 X-126.60393 Y87.07586
G01 X-126.67571 Y87.03131
G01 X-126.75409 Y86.99973
G01 X-126.83675 Y86.98211
G01 X-126.89245 Y86.97517
G01 X-126.91505 Y86.98688
G01 X-126.94045 Y87.00045
G01 X-127.02496 Y87.04703
G01 X-127.12148 Y87.10903
G01 X-127.16082 Y87.13842
G01 X-127.18536 Y87.15600
G01 X-127.21985 Y87.17964
G01 X-127.26148 Y87.21048
G01 X-127.34358 Y87.27611
G01 X-127.38076 Y87.30387
G01 X-127.40052 Y87.31490
G01 X-127.53865 Y87.38919
G01 X-127.54820 Y87.39425
G01 X-127.60286 Y87.41447
G01 X-127.72839 Y87.45503
G01 X-127.75270 Y87.46072
G01 X-127.82046 Y87.47311
G01 X-127.91592 Y87.48576
G01 X-127.96410 Y87.48813
G01 X-127.97652 Y87.48884
G01 X-128.01002 Y87.49107
G01 X-128.04571 Y87.49257
G01 X-128.04906 Y87.49262
G01 X-128.14932 Y87.50121
G01 X-128.18584 Y87.52750
G01 X-128.24756 Y87.57487
G01 X-128.26532 Y87.58891
G01 X-128.29209 Y87.61086
G01 X-128.31815 Y87.63329
G01 X-128.34568 Y87.65371
G01 X-128.40299 Y87.69199
G01 X-128.43245 Y87.70964
G01 X-128.46346 Y87.72432
G01 X-128.52706 Y87.75066
G01 X-128.55942 Y87.76224
G01 X-128.59272 Y87.77057
G01 X-128.66019 Y87.78401
G01 X-128.69422 Y87.78904
G01 X-128.72849 Y87.79074
G01 X-128.76290 Y87.79158
G01 X-130.33105 Y87.79158
G01 X-130.37700 Y87.79308
G01 X-130.41591 Y87.79564
G01 X-130.55863 Y87.81944
G01 X-130.63577 Y87.84009
G01 X-130.82521 Y87.91495
G01 X-130.84875 Y87.94748
G01 X-130.85726 Y87.95980
G01 X-130.89455 Y88.01010
G01 X-130.90938 Y88.02884
G01 X-130.91291 Y88.03329
G01 X-130.91540 Y88.03578
G01 X-131.03664 Y88.13527
G01 X-131.11649 Y88.18863
G01 X-131.25480 Y88.26255
G01 X-131.34354 Y88.29933
G01 X-131.48195 Y88.34131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.90938 Y88.02884 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.90938 Y88.02884
G01 X-130.93544 Y88.08472
G01 X-130.95754 Y88.16719
G01 X-130.96498 Y88.25226
G01 X-130.96498 Y88.32937
G01 X-130.96381 Y88.34309
G01 X-130.96275 Y88.34416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.21146 Y90.92132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.21146 Y90.92132
G01 X-133.24481 Y90.97392
G01 X-133.28413 Y91.04982
G01 X-133.30963 Y91.13140
G01 X-133.31916 Y91.20511
G01 X-133.31377 Y91.21644
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-135.26647 Y92.35573 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-135.26647 Y92.35573
G01 X-135.27183 Y92.34857
G01 X-135.29213 Y92.33965
G01 X-135.37516 Y92.31946
G01 X-135.45141 Y92.30783
G01 X-135.53658 Y92.30234
G01 X-135.62139 Y92.31174
G01 X-135.70330 Y92.33569
G01 X-135.74508 Y92.35197
G01 X-135.74529 Y92.35228
G01 X-135.74801 Y92.35606
G01 X-135.76792 Y92.38230
G01 X-135.84709 Y92.50391
G01 X-135.88562 Y92.57440
G01 X-135.89121 Y92.58484
G01 X-135.92784 Y92.65436
G01 X-135.95695 Y92.71664
G01 X-135.96639 Y92.73965
G01 X-135.98440 Y92.77989
G01 X-136.02126 Y92.85581
G01 X-136.05827 Y92.91824
G01 X-136.09619 Y92.97564
G01 X-136.12504 Y93.01496
G01 X-136.19601 Y93.09660
G01 X-136.24374 Y93.14636
G01 X-136.25321 Y93.15530
G01 X-136.36558 Y93.24511
G01 X-136.40277 Y93.27285
G01 X-136.42253 Y93.28390
G01 X-136.56065 Y93.35819
G01 X-136.57020 Y93.36325
G01 X-136.62486 Y93.38347
G01 X-136.75039 Y93.42403
G01 X-136.77470 Y93.42972
G01 X-136.84247 Y93.44211
G01 X-136.93792 Y93.45476
G01 X-136.99852 Y93.45774
G01 X-137.06733 Y93.45774
G01 X-137.12794 Y93.45476
G01 X-137.22336 Y93.44211
G01 X-137.29111 Y93.42972
G01 X-137.31544 Y93.42403
G01 X-137.44097 Y93.38347
G01 X-137.49563 Y93.36325
G01 X-137.50520 Y93.35819
G01 X-137.64333 Y93.28390
G01 X-137.66309 Y93.27285
G01 X-137.69286 Y93.25095
G01 X-137.70028 Y93.24511
G01 X-137.81262 Y93.15530
G01 X-137.82212 Y93.14633
G01 X-137.86985 Y93.09660
G01 X-137.94081 Y93.01496
G01 X-137.96967 Y92.97564
G01 X-138.00761 Y92.91819
G01 X-138.04457 Y92.85581
G01 X-138.08145 Y92.77983
G01 X-138.10845 Y92.71656
G01 X-138.12123 Y92.68194
G01 X-138.15341 Y92.56632
G01 X-138.16863 Y92.49896
G01 X-138.16880 Y92.49787
G01 X-138.18287 Y92.34278
G01 X-138.18514 Y92.30833
G01 X-138.18287 Y92.27387
G01 X-138.16880 Y92.11877
G01 X-138.16863 Y92.11768
G01 X-138.15341 Y92.05035
G01 X-138.12123 Y91.93470
G01 X-138.10845 Y91.90008
G01 X-138.08145 Y91.83681
G01 X-138.04457 Y91.76084
G01 X-138.00761 Y91.69846
G01 X-137.96967 Y91.64100
G01 X-137.94081 Y91.60168
G01 X-137.86985 Y91.52005
G01 X-137.82212 Y91.47031
G01 X-137.81262 Y91.46135
G01 X-137.70028 Y91.37153
G01 X-137.66309 Y91.34380
G01 X-137.64328 Y91.33272
G01 X-137.50518 Y91.25845
G01 X-137.49565 Y91.25342
G01 X-137.44102 Y91.23323
G01 X-137.31544 Y91.19264
G01 X-137.29116 Y91.18695
G01 X-137.22336 Y91.17455
G01 X-137.12791 Y91.16188
G01 X-137.06733 Y91.15891
G01 X-136.99852 Y91.15891
G01 X-136.93794 Y91.16188
G01 X-136.84247 Y91.17455
G01 X-136.79108 Y91.18332
G01 X-136.77465 Y91.18695
G01 X-136.75037 Y91.19264
G01 X-136.69974 Y91.20900
G01 X-136.62481 Y91.23323
G01 X-136.57020 Y91.25342
G01 X-136.56068 Y91.25845
G01 X-136.42258 Y91.33272
G01 X-136.40274 Y91.34380
G01 X-136.36558 Y91.37153
G01 X-136.29248 Y91.42995
G01 X-136.27323 Y91.44481
G01 X-136.25674 Y91.45708
G01 X-136.24178 Y91.46792
G01 X-136.18298 Y91.50935
G01 X-136.15646 Y91.52723
G01 X-136.08839 Y91.57112
G01 X-136.04379 Y91.59802
G01 X-135.95938 Y91.64555
G01 X-135.91788 Y91.66604
G01 X-135.91786 Y91.66604
G01 X-135.91636 Y91.66681
G01 X-135.85758 Y91.65644
G01 X-135.78308 Y91.63648
G01 X-135.70282 Y91.60727
G01 X-135.62885 Y91.56457
G01 X-135.62177 Y91.55860
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-135.74529 Y92.35228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-135.74529 Y92.35228
G01 X-135.74529 Y92.26028
G01 X-135.76068 Y92.10422
G01 X-135.77940 Y92.01001
G01 X-135.82494 Y91.85992
G01 X-135.86170 Y91.77118
G01 X-135.91786 Y91.66604
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-138.98618 Y88.41660 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-138.98618 Y88.41660
G01 X-138.99174 Y88.33720
G01 X-138.98854 Y88.30669
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.19636 Y88.36133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.19636 Y88.36133
G01 X-139.11363 Y88.34484
G01 X-138.98874 Y88.30695
G01 X-138.98854 Y88.30669
G01 X-138.96893 Y88.28165
G01 X-138.90477 Y88.20641
G01 X-138.89479 Y88.19493
G01 X-138.84033 Y88.13321
G01 X-138.79260 Y88.08358
G01 X-138.74015 Y88.03354
G01 X-138.72669 Y88.02102
G01 X-138.69209 Y87.98970
G01 X-138.66931 Y87.96991
G01 X-138.62354 Y87.92846
G01 X-138.57482 Y87.87974
G01 X-138.53728 Y87.83832
G01 X-138.47553 Y87.75836
G01 X-138.43609 Y87.70179
G01 X-138.43045 Y87.69277
G01 X-138.36278 Y87.56313
G01 X-138.34764 Y87.53230
G01 X-138.33647 Y87.49956
G01 X-138.29263 Y87.36003
G01 X-138.29024 Y87.34970
G01 X-138.27812 Y87.28178
G01 X-138.26525 Y87.18157
G01 X-138.26250 Y87.12572
G01 X-138.26250 Y87.05691
G01 X-138.26525 Y87.00108
G01 X-138.27812 Y86.90088
G01 X-138.29024 Y86.83298
G01 X-138.29263 Y86.82262
G01 X-138.33647 Y86.68310
G01 X-138.34759 Y86.65048
G01 X-138.36281 Y86.61950
G01 X-138.43045 Y86.48988
G01 X-138.43611 Y86.48086
G01 X-138.47553 Y86.42430
G01 X-138.53731 Y86.34431
G01 X-138.57485 Y86.30291
G01 X-138.62331 Y86.25440
G01 X-138.68839 Y86.18711
G01 X-138.73052 Y86.13743
G01 X-138.73919 Y86.12740
G01 X-138.78186 Y86.07883
G01 X-138.88280 Y85.93939
G01 X-138.88404 Y85.93733
G01 X-138.90291 Y85.90842
G01 X-138.90291 Y85.90840
G01 X-138.90360 Y85.90738
G01 X-138.90360 Y85.86225
G01 X-138.89616 Y85.77718
G01 X-138.88201 Y85.72443
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-138.90291 Y85.90840 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-138.90291 Y85.90840
G01 X-138.96354 Y85.88330
G01 X-139.11363 Y85.83779
G01 X-139.19636 Y85.82133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-140.74182 Y85.91823 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-140.74182 Y85.91823
G01 X-140.72768 Y85.86550
G01 X-140.72023 Y85.78038
G01 X-140.72023 Y85.73525
G01 X-140.72087 Y85.73423
G01 X-140.73982 Y85.70530
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-140.42737 Y85.82133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-140.42737 Y85.82133
G01 X-140.51025 Y85.80484
G01 X-140.66031 Y85.75933
G01 X-140.72087 Y85.73423
G01 X-140.72092 Y85.73423
G01 X-140.73982 Y85.70530
G01 X-140.74104 Y85.70327
G01 X-140.84200 Y85.56375
G01 X-140.88472 Y85.51518
G01 X-140.89331 Y85.50520
G01 X-140.93552 Y85.45547
G01 X-141.00032 Y85.38843
G01 X-141.00052 Y85.38826
G01 X-141.04901 Y85.33974
G01 X-141.08653 Y85.29834
G01 X-141.14832 Y85.21838
G01 X-141.18772 Y85.16182
G01 X-141.19341 Y85.15277
G01 X-141.26105 Y85.02316
G01 X-141.27626 Y84.99217
G01 X-141.28742 Y84.95948
G01 X-141.33123 Y84.82003
G01 X-141.33362 Y84.80964
G01 X-141.34573 Y84.74178
G01 X-141.35859 Y84.64160
G01 X-141.36133 Y84.58572
G01 X-141.36133 Y84.51691
G01 X-141.35859 Y84.46106
G01 X-141.34573 Y84.36088
G01 X-141.33362 Y84.29303
G01 X-141.33123 Y84.28262
G01 X-141.28742 Y84.14315
G01 X-141.27626 Y84.11048
G01 X-141.26102 Y84.07945
G01 X-141.19341 Y83.94988
G01 X-141.18769 Y83.94081
G01 X-141.14832 Y83.88427
G01 X-141.08655 Y83.80434
G01 X-141.04901 Y83.76291
G01 X-141.00034 Y83.71424
G01 X-140.95468 Y83.67287
G01 X-140.93164 Y83.65285
G01 X-140.89704 Y83.62151
G01 X-140.88376 Y83.60914
G01 X-140.83118 Y83.55900
G01 X-140.78350 Y83.50942
G01 X-140.72905 Y83.44770
G01 X-140.71901 Y83.43614
G01 X-140.65490 Y83.36103
G01 X-140.63530 Y83.33596
G01 X-140.63527 Y83.33594
G01 X-140.63507 Y83.33566
G01 X-140.51025 Y83.29779
G01 X-140.42737 Y83.28133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-140.63527 Y83.33594 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-140.63527 Y83.33594
G01 X-140.63210 Y83.30543
G01 X-140.63751 Y83.22623
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.19636 Y83.28133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.19636 Y83.28133
G01 X-139.11363 Y83.26484
G01 X-138.96354 Y83.21933
G01 X-138.87480 Y83.18255
G01 X-138.73649 Y83.10863
G01 X-138.65664 Y83.05527
G01 X-138.53540 Y82.95578
G01 X-138.46748 Y82.88786
G01 X-138.36799 Y82.76662
G01 X-138.31462 Y82.68676
G01 X-138.24069 Y82.54844
G01 X-138.21163 Y82.47831
G01 X-138.20393 Y82.45969
G01 X-138.15841 Y82.30962
G01 X-138.13967 Y82.21542
G01 X-138.12430 Y82.05933
G01 X-138.12430 Y81.96330
G01 X-138.13967 Y81.80721
G01 X-138.15841 Y81.71300
G01 X-138.20393 Y81.56292
G01 X-138.24069 Y81.47419
G01 X-138.31462 Y81.33586
G01 X-138.36799 Y81.25601
G01 X-138.46748 Y81.13477
G01 X-138.53540 Y81.06685
G01 X-138.65664 Y80.96736
G01 X-138.73649 Y80.91400
G01 X-138.83692 Y80.86033
G01 X-138.83692 Y79.54034
G01 X-138.78298 Y79.47463
G01 X-138.72961 Y79.39475
G01 X-138.65570 Y79.25644
G01 X-138.61894 Y79.16770
G01 X-138.57340 Y79.01763
G01 X-138.56659 Y78.98334
G01 X-138.55468 Y78.92342
G01 X-138.53929 Y78.76734
G01 X-138.53929 Y78.67128
G01 X-138.54386 Y78.62467
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-138.01996 Y78.58037 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-138.01996 Y78.58037
G01 X-138.01120 Y78.66942
G01 X-137.99248 Y78.76363
G01 X-137.94693 Y78.91370
G01 X-137.91018 Y79.00247
G01 X-137.83627 Y79.14075
G01 X-137.78288 Y79.22063
G01 X-137.72893 Y79.28639
G01 X-137.72893 Y83.53225
G01 X-137.75798 Y83.56131
G01 X-138.59088 Y83.56131
G01 X-138.63355 Y83.52631
G01 X-138.65664 Y83.50736
G01 X-138.73649 Y83.45400
G01 X-138.87480 Y83.38006
G01 X-138.96354 Y83.34330
G01 X-139.11363 Y83.29779
G01 X-139.19636 Y83.28133
G01 X-139.36555 Y83.28133
G01 X-139.41190 Y83.28130
G01 X-140.25818 Y83.28130
G01 X-140.42737 Y83.28133
G01 X-140.51025 Y83.26484
G01 X-140.63751 Y83.22623
G01 X-140.64190 Y83.22085
G01 X-140.65587 Y83.20480
G01 X-140.69915 Y83.15181
G01 X-140.71884 Y83.12603
G01 X-140.83166 Y83.00439
G01 X-140.84866 Y82.98948
G01 X-140.88513 Y82.95522
G01 X-140.90464 Y82.93558
G01 X-140.95468 Y82.88979
G01 X-141.00032 Y82.84843
G01 X-141.04901 Y82.79974
G01 X-141.08655 Y82.75832
G01 X-141.14832 Y82.67838
G01 X-141.18772 Y82.62182
G01 X-141.19341 Y82.61277
G01 X-141.26105 Y82.48316
G01 X-141.27626 Y82.45217
G01 X-141.28742 Y82.41948
G01 X-141.33123 Y82.28003
G01 X-141.33362 Y82.26964
G01 X-141.34573 Y82.20178
G01 X-141.35859 Y82.10160
G01 X-141.36133 Y82.04572
G01 X-141.36133 Y81.97691
G01 X-141.35859 Y81.92106
G01 X-141.34573 Y81.82088
G01 X-141.33362 Y81.75303
G01 X-141.33123 Y81.74262
G01 X-141.28742 Y81.60315
G01 X-141.27626 Y81.57048
G01 X-141.26102 Y81.53945
G01 X-141.19341 Y81.40988
G01 X-141.18769 Y81.40081
G01 X-141.14832 Y81.34427
G01 X-141.08655 Y81.26434
G01 X-141.04901 Y81.22291
G01 X-141.00034 Y81.17424
G01 X-140.95892 Y81.13670
G01 X-140.89481 Y81.08715
G01 X-140.89450 Y81.08692
G01 X-140.88223 Y81.07745
G01 X-140.87901 Y81.07493
G01 X-140.82422 Y81.03203
G01 X-140.77472 Y80.99330
G01 X-140.71254 Y80.93894
G01 X-140.69341 Y80.84255
G01 X-140.68325 Y80.76543
G01 X-140.67718 Y80.67320
G01 X-140.67718 Y79.66962
G01 X-140.67726 Y79.65992
G01 X-140.67736 Y79.65164
G01 X-140.68625 Y79.54943
G01 X-140.69468 Y79.49663
G01 X-140.70657 Y79.47496
G01 X-140.75709 Y79.39563
G01 X-140.76367 Y79.38667
G01 X-140.80161 Y79.32921
G01 X-140.83857 Y79.26683
G01 X-140.87545 Y79.19083
G01 X-140.90245 Y79.12756
G01 X-140.91523 Y79.09294
G01 X-140.94741 Y78.97732
G01 X-140.96263 Y78.90999
G01 X-140.96280 Y78.90887
G01 X-140.97687 Y78.75378
G01 X-140.97914 Y78.71931
G01 X-140.97870 Y78.70994
G01 X-140.97687 Y78.68487
G01 X-140.96280 Y78.52977
G01 X-140.96263 Y78.52868
G01 X-140.94741 Y78.46135
G01 X-140.91523 Y78.34570
G01 X-140.90245 Y78.31108
G01 X-140.87545 Y78.24781
G01 X-140.83857 Y78.17184
G01 X-140.80161 Y78.10946
G01 X-140.76367 Y78.05200
G01 X-140.73481 Y78.01271
G01 X-140.66385 Y77.93105
G01 X-140.61612 Y77.88134
G01 X-140.60662 Y77.87237
G01 X-140.49427 Y77.78256
G01 X-140.45709 Y77.75479
G01 X-140.43728 Y77.74375
G01 X-140.29918 Y77.66945
G01 X-140.28965 Y77.66442
G01 X-140.23502 Y77.64423
G01 X-140.10944 Y77.60364
G01 X-140.08516 Y77.59795
G01 X-140.01736 Y77.58555
G01 X-139.92191 Y77.57288
G01 X-139.86133 Y77.56991
G01 X-139.79252 Y77.56991
G01 X-139.73194 Y77.57288
G01 X-139.63647 Y77.58555
G01 X-139.58508 Y77.59432
G01 X-139.56865 Y77.59795
G01 X-139.54442 Y77.60364
G01 X-139.41881 Y77.64423
G01 X-139.36418 Y77.66442
G01 X-139.35468 Y77.66945
G01 X-139.21658 Y77.74375
G01 X-139.19674 Y77.75479
G01 X-139.15958 Y77.78256
G01 X-139.04724 Y77.87232
G01 X-139.03774 Y77.88129
G01 X-139.02923 Y77.88949
G01 X-138.99001 Y77.93105
G01 X-138.91904 Y78.01271
G01 X-138.89019 Y78.05200
G01 X-138.85227 Y78.10940
G01 X-138.81528 Y78.17184
G01 X-138.78803 Y78.22795
G01 X-138.77810 Y78.24761
G01 X-138.75666 Y78.28845
G01 X-138.74602 Y78.30953
G01 X-138.73116 Y78.34026
G01 X-138.66664 Y78.44936
G01 X-138.63494 Y78.49427
G01 X-138.61655 Y78.52134
G01 X-138.58696 Y78.56653
G01 X-138.54389 Y78.62467
G01 X-138.54386 Y78.62467
G01 X-138.54183 Y78.62746
G01 X-138.52727 Y78.63399
G01 X-138.44452 Y78.65497
G01 X-138.35940 Y78.66124
G01 X-138.28229 Y78.66023
G01 X-138.19723 Y78.65159
G01 X-138.11496 Y78.62835
G01 X-138.03797 Y78.59112
G01 X-138.01996 Y78.58037
G01 X-137.99006 Y78.52119
G01 X-137.98407 Y78.50915
G01 X-137.94315 Y78.42551
G01 X-137.89781 Y78.31238
G01 X-137.88567 Y78.27362
G01 X-137.87335 Y78.23770
G01 X-137.86184 Y78.20671
G01 X-137.84343 Y78.14992
G01 X-137.82725 Y78.09170
G01 X-137.81447 Y78.05713
G01 X-137.78745 Y77.99376
G01 X-137.75059 Y77.91789
G01 X-137.71358 Y77.85543
G01 X-137.67566 Y77.79800
G01 X-137.66908 Y77.78908
G01 X-137.66304 Y77.78065
G01 X-137.65826 Y77.77395
G01 X-137.60591 Y77.68830
G01 X-137.60541 Y77.68441
G01 X-137.59525 Y77.60730
G01 X-137.58918 Y77.51504
G01 X-137.58918 Y76.36760
G01 X-137.58925 Y76.35782
G01 X-137.58935 Y76.34962
G01 X-137.59824 Y76.24743
G01 X-137.60668 Y76.19463
G01 X-137.61856 Y76.17293
G01 X-137.66908 Y76.09363
G01 X-137.67566 Y76.08464
G01 X-137.71358 Y76.02724
G01 X-137.75057 Y75.96483
G01 X-137.75364 Y75.95848
G01 X-137.78366 Y75.89671
G01 X-137.78750 Y75.88891
G01 X-137.79070 Y75.88251
G01 X-137.79662 Y75.87045
G01 X-137.81760 Y75.82648
G01 X-137.84666 Y75.77172
G01 X-137.88674 Y75.70329
G01 X-137.89679 Y75.68663
G01 X-137.94140 Y75.61454
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-138.47094 Y75.51050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-138.47094 Y75.51050
G01 X-138.46647 Y75.50352
G01 X-138.43078 Y75.49135
G01 X-138.35590 Y75.47291
G01 X-138.27157 Y75.45980
G01 X-138.18625 Y75.46151
G01 X-138.10253 Y75.47799
G01 X-138.02844 Y75.49943
G01 X-138.02331 Y75.50141
G01 X-138.02298 Y75.50184
G01 X-137.94140 Y75.61454
G01 X-138.02298 Y75.50187
G01 X-138.02659 Y75.46534
G01 X-138.02659 Y75.36928
G01 X-138.01120 Y75.21322
G01 X-137.99248 Y75.11901
G01 X-137.98470 Y75.09343
G01 X-137.94693 Y74.96892
G01 X-137.91018 Y74.88018
G01 X-137.83627 Y74.74187
G01 X-137.78288 Y74.66201
G01 X-137.72893 Y74.59625
G01 X-137.72893 Y73.40817
G01 X-137.73858 Y73.31043
G01 X-137.74094 Y73.26232
G01 X-137.74094 Y67.92632
G01 X-139.56357 Y67.92632
G01 X-139.60751 Y68.00854
G01 X-139.66844 Y68.08281
G01 X-139.74271 Y68.14374
G01 X-139.82742 Y68.18900
G01 X-139.91935 Y68.21689
G01 X-140.01493 Y68.22632
G01 X-141.61495 Y68.22632
G01 X-141.71053 Y68.21689
G01 X-141.80245 Y68.18900
G01 X-141.88716 Y68.14374
G01 X-141.96143 Y68.08281
G01 X-142.02236 Y68.00854
G01 X-142.06631 Y67.92632
G01 X-143.38894 Y67.92632
G01 X-143.38894 Y67.99731
G01 X-143.39836 Y68.09291
G01 X-143.42625 Y68.18484
G01 X-143.47151 Y68.26955
G01 X-143.53245 Y68.34379
G01 X-143.60671 Y68.40472
G01 X-143.69142 Y68.45001
G01 X-143.78335 Y68.47790
G01 X-143.87893 Y68.48730
G01 X-144.01172 Y68.48733
G01 X-144.15396 Y68.42840
G01 X-144.19549 Y68.41240
G01 X-144.39152 Y68.34224
G01 X-144.45711 Y68.32230
G01 X-144.65314 Y68.27318
G01 X-144.70620 Y68.26259
G01 X-144.90227 Y68.23353
G01 X-144.94809 Y68.22898
G01 X-145.14413 Y68.21936
G01 X-145.16592 Y68.21882
G01 X-145.87895 Y68.21882
G01 X-146.32195 Y67.99731
G01 X-146.36894 Y67.95032
G01 X-151.23972 Y67.95032
G01 X-151.32374 Y67.99007
G01 X-151.40850 Y68.02527
G01 X-151.60454 Y68.09540
G01 X-151.67017 Y68.11537
G01 X-151.86624 Y68.16447
G01 X-151.91922 Y68.17503
G01 X-152.11523 Y68.20414
G01 X-152.16113 Y68.20866
G01 X-152.35717 Y68.21829
G01 X-152.40068 Y68.21829
G01 X-152.59671 Y68.20866
G01 X-152.64261 Y68.20414
G01 X-152.83862 Y68.17503
G01 X-152.89161 Y68.16447
G01 X-153.08767 Y68.11537
G01 X-153.15330 Y68.09540
G01 X-153.34934 Y68.02527
G01 X-153.43410 Y67.99007
G01 X-153.51812 Y67.95032
G01 X-153.57053 Y67.88646
G01 X-153.57157 Y67.87767
G01 X-153.57510 Y67.85220
G01 X-153.58196 Y67.78898
G01 X-153.58475 Y67.75299
G01 X-153.61879 Y67.57168
G01 X-153.62486 Y67.55212
G01 X-153.63982 Y67.49645
G01 X-153.64281 Y67.48319
G01 X-153.66458 Y67.40701
G01 X-153.66870 Y67.39515
G01 X-153.69547 Y67.29431
G01 X-153.70987 Y67.22688
G01 X-153.71447 Y67.19861
G01 X-153.72892 Y67.03178
G01 X-153.73108 Y66.99731
G01 X-153.72892 Y66.96287
G01 X-153.71447 Y66.79604
G01 X-153.70987 Y66.76777
G01 X-153.69547 Y66.70033
G01 X-153.66870 Y66.59950
G01 X-153.63857 Y66.51275
G01 X-153.61284 Y66.44895
G01 X-153.59552 Y66.41146
G01 X-153.52031 Y66.27610
G01 X-153.49605 Y66.23569
G01 X-153.48251 Y66.21842
G01 X-153.36131 Y66.06859
G01 X-153.35917 Y66.06607
G01 X-153.35196 Y66.05749
G01 X-153.34866 Y66.05357
G01 X-153.32089 Y66.02271
G01 X-153.31266 Y66.01405
G01 X-153.25320 Y65.94321
G01 X-153.24541 Y65.89581
G01 X-153.23525 Y65.81870
G01 X-153.22917 Y65.72647
G01 X-153.22917 Y63.64131
G01 X-153.22834 Y63.60684
G01 X-153.22674 Y63.57458
G01 X-153.21835 Y63.50933
G01 X-153.20649 Y63.44263
G01 X-153.20616 Y63.44162
G01 X-153.17680 Y63.34809
G01 X-153.16565 Y63.31543
G01 X-153.15046 Y63.28449
G01 X-153.10510 Y63.19760
G01 X-153.10459 Y63.19663
G01 X-153.06578 Y63.14103
G01 X-153.02562 Y63.08904
G01 X-153.00388 Y63.06506
G01 X-152.98013 Y63.04012
G01 X-150.26604 Y60.32598
G01 X-146.11514 Y56.17511
G01 X-146.09020 Y56.15136
G01 X-146.06625 Y56.12964
G01 X-146.01423 Y56.08946
G01 X-145.95860 Y56.05065
G01 X-145.95766 Y56.05014
G01 X-145.87077 Y56.00480
G01 X-145.83978 Y55.98956
G01 X-145.80717 Y55.97844
G01 X-145.71364 Y55.94907
G01 X-145.71263 Y55.94874
G01 X-145.64593 Y55.93688
G01 X-145.58065 Y55.92850
G01 X-145.54842 Y55.92692
G01 X-145.51395 Y55.92606
G01 X-142.16443 Y55.92606
G01 X-142.07217 Y55.91999
G01 X-141.99506 Y55.90986
G01 X-141.79150 Y55.85428
G01 X-141.75295 Y55.83830
G01 X-141.73697 Y55.79975
G01 X-141.68139 Y55.59619
G01 X-141.67126 Y55.51908
G01 X-141.66969 Y55.50633
G01 X-141.66575 Y55.47168
G01 X-141.66298 Y55.44156
G01 X-141.65693 Y55.39446
G01 X-141.65437 Y55.37432
G01 X-141.64248 Y55.30754
G01 X-141.64218 Y55.30661
G01 X-141.61281 Y55.21308
G01 X-141.60169 Y55.18047
G01 X-141.58645 Y55.14948
G01 X-141.54111 Y55.06259
G01 X-141.54060 Y55.06165
G01 X-141.50179 Y55.00602
G01 X-141.46161 Y54.95400
G01 X-141.43989 Y54.93005
G01 X-141.41614 Y54.90511
G01 X-140.56915 Y54.05812
G01 X-140.55724 Y54.04593
G01 X-140.54731 Y54.03549
G01 X-140.47756 Y53.94976
G01 X-140.46329 Y53.92919
G01 X-140.45478 Y53.91809
G01 X-140.43304 Y53.82843
G01 X-140.43184 Y53.82164
G01 X-140.42661 Y53.79162
G01 X-140.41142 Y53.72439
G01 X-140.37924 Y53.60869
G01 X-140.36646 Y53.57412
G01 X-140.33946 Y53.51080
G01 X-140.30258 Y53.43485
G01 X-140.26562 Y53.37245
G01 X-140.22768 Y53.31502
G01 X-140.19882 Y53.27567
G01 X-140.12785 Y53.19404
G01 X-140.08010 Y53.14430
G01 X-140.07063 Y53.13536
G01 X-139.95828 Y53.04555
G01 X-139.92110 Y53.01779
G01 X-139.90129 Y53.00671
G01 X-139.76319 Y52.93244
G01 X-139.75364 Y52.92741
G01 X-139.69898 Y52.90719
G01 X-139.57241 Y52.86630
G01 X-139.56695 Y52.86490
G01 X-139.55303 Y52.86130
G01 X-139.54932 Y52.86033
G01 X-139.48203 Y52.84253
G01 X-139.44518 Y52.83173
G01 X-139.37002 Y52.80758
G01 X-139.32930 Y52.79325
G01 X-139.24955 Y52.76274
G01 X-139.14691 Y52.71669
G01 X-139.12638 Y52.70615
G01 X-139.08684 Y52.71004
G01 X-138.99263 Y52.72878
G01 X-138.84254 Y52.77430
G01 X-138.75382 Y52.81106
G01 X-138.67881 Y52.85116
G01 X-138.62052 Y52.89437
G01 X-138.54820 Y52.95370
G01 X-138.47848 Y53.01690
G01 X-138.44876 Y53.07974
G01 X-138.41468 Y53.16178
G01 X-138.35857 Y53.31860
G01 X-138.33855 Y53.38438
G01 X-138.29928 Y53.54120
G01 X-138.28831 Y53.59625
G01 X-138.26504 Y53.75309
G01 X-138.26022 Y53.80199
G01 X-138.25250 Y53.95880
G01 X-138.25250 Y54.00582
G01 X-138.26022 Y54.16267
G01 X-138.26504 Y54.21156
G01 X-138.28831 Y54.36841
G01 X-138.29928 Y54.42345
G01 X-138.33855 Y54.58027
G01 X-138.35857 Y54.64605
G01 X-138.41468 Y54.80287
G01 X-138.44876 Y54.88491
G01 X-138.50292 Y54.99942
G01 X-138.50294 Y62.99930
G01 X-138.50058 Y63.04733
G01 X-138.49098 Y63.14489
G01 X-138.47223 Y63.23910
G01 X-138.44378 Y63.33290
G01 X-138.40703 Y63.42165
G01 X-138.36080 Y63.50809
G01 X-138.30744 Y63.58794
G01 X-138.24526 Y63.66371
G01 X-138.21297 Y63.69935
G01 X-137.74094 Y64.17138
G01 X-137.74094 Y65.94631
G01 X-139.56357 Y65.94631
G01 X-139.60751 Y65.86409
G01 X-139.66844 Y65.78982
G01 X-139.74271 Y65.72889
G01 X-139.82742 Y65.68362
G01 X-139.91935 Y65.65573
G01 X-140.01493 Y65.64631
G01 X-141.61495 Y65.64631
G01 X-141.71053 Y65.65573
G01 X-141.80245 Y65.68362
G01 X-141.88716 Y65.72889
G01 X-141.96143 Y65.78982
G01 X-142.02236 Y65.86409
G01 X-142.06631 Y65.94631
G01 X-143.39396 Y65.94631
G01 X-143.39836 Y65.90171
G01 X-143.42625 Y65.80981
G01 X-143.47151 Y65.72508
G01 X-143.53245 Y65.65083
G01 X-143.60671 Y65.58990
G01 X-143.69142 Y65.54461
G01 X-143.78335 Y65.51672
G01 X-143.87893 Y65.50732
G01 X-145.87895 Y65.50732
G01 X-145.97453 Y65.51672
G01 X-146.06645 Y65.54461
G01 X-146.15116 Y65.58990
G01 X-146.22543 Y65.65083
G01 X-146.28636 Y65.72508
G01 X-146.33163 Y65.80981
G01 X-146.35952 Y65.90171
G01 X-146.36894 Y65.99731
G01 X-146.36894 Y67.95032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-149.18869 Y70.93035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-149.18869 Y70.93035
G01 X-148.93927 Y71.17980
G01 X-148.91872 Y71.25125
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-148.84132 Y70.93032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-148.84132 Y70.93032
G01 X-149.18869 Y70.93035
G01 X-149.60391 Y70.75836
G01 X-149.63454 Y70.74655
G01 X-149.83058 Y70.67640
G01 X-149.87546 Y70.66276
G01 X-150.07150 Y70.61364
G01 X-150.10482 Y70.60698
G01 X-150.30088 Y70.57792
G01 X-150.32755 Y70.57528
G01 X-150.52362 Y70.56563
G01 X-150.53591 Y70.56533
G01 X-156.41995 Y70.56533
G01 X-156.43222 Y70.56563
G01 X-156.62825 Y70.57528
G01 X-156.65492 Y70.57792
G01 X-156.85099 Y70.60698
G01 X-156.88431 Y70.61364
G01 X-157.08032 Y70.66273
G01 X-157.12526 Y70.67640
G01 X-157.32129 Y70.74655
G01 X-157.35190 Y70.75836
G01 X-157.76704 Y70.93032
G01 X-158.01271 Y71.17592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-158.18497 Y70.89431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-158.18497 Y70.89431
G01 X-158.11994 Y70.93032
G01 X-157.76704 Y70.93032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-155.97791 Y73.35549 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-155.97791 Y73.35549
G01 X-155.97794 Y74.68513
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-158.33661 Y76.48987 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-158.33661 Y76.48987
G01 X-158.31895 Y76.55848
G01 X-158.31893 Y76.55848
G01 X-158.31144 Y76.58766
G01 X-158.33013 Y76.65744
G01 X-158.36622 Y76.73483
G01 X-158.40478 Y76.80163
G01 X-158.45378 Y76.87164
G01 X-158.51420 Y76.93206
G01 X-158.58421 Y76.98106
G01 X-158.65101 Y77.01962
G01 X-158.73846 Y77.05924
G01 X-158.83196 Y77.08106
G01 X-158.87051 Y77.08614
G01 X-158.93452 Y77.09033
G01 X-159.36279 Y77.09033
G01 X-159.58715 Y77.11560
G01 X-159.80724 Y77.16585
G01 X-160.02035 Y77.24042
G01 X-160.22373 Y77.33834
G01 X-160.41486 Y77.45845
G01 X-160.59139 Y77.59922
G01 X-160.75100 Y77.75886
G01 X-160.89177 Y77.93539
G01 X-161.01189 Y78.12652
G01 X-161.07633 Y78.26033
G01 X-161.04920 Y78.26033
G01 X-160.92929 Y78.03597
G01 X-160.87592 Y77.95614
G01 X-160.68938 Y77.72881
G01 X-160.62144 Y77.66087
G01 X-160.39413 Y77.47433
G01 X-160.31428 Y77.42096
G01 X-160.05494 Y77.28235
G01 X-159.96619 Y77.24560
G01 X-159.68481 Y77.16023
G01 X-159.59060 Y77.14149
G01 X-159.29797 Y77.11268
G01 X-159.24994 Y77.11032
G01 X-158.24994 Y77.11032
G01 X-158.20191 Y77.11268
G01 X-157.90928 Y77.14149
G01 X-157.81507 Y77.16023
G01 X-157.67456 Y77.20285
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.58992 Y81.05921 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.58992 Y81.05921
G01 X-159.59060 Y81.05913
G01 X-159.68481 Y81.04039
G01 X-159.96619 Y80.95504
G01 X-160.05494 Y80.91826
G01 X-160.31428 Y80.77966
G01 X-160.39413 Y80.72629
G01 X-160.62144 Y80.53975
G01 X-160.68938 Y80.47183
G01 X-160.87592 Y80.24453
G01 X-160.92929 Y80.16465
G01 X-161.04917 Y79.94034
G01 X-161.07633 Y79.94034
G01 X-161.01189 Y80.07415
G01 X-160.89177 Y80.26528
G01 X-160.75100 Y80.44181
G01 X-160.59139 Y80.60145
G01 X-160.41489 Y80.74219
G01 X-160.22375 Y80.86228
G01 X-160.02032 Y80.96025
G01 X-159.80722 Y81.03482
G01 X-159.58992 Y81.08443
G01 X-159.58992 Y81.05921
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-156.89734 Y80.59032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-156.89734 Y80.59032
G01 X-156.94004 Y80.59032
G01 X-157.10572 Y80.72629
G01 X-157.18561 Y80.77966
G01 X-157.44494 Y80.91826
G01 X-157.53366 Y80.95504
G01 X-157.81507 Y81.04039
G01 X-157.90928 Y81.05913
G01 X-157.90991 Y81.05918
G01 X-157.90991 Y81.08443
G01 X-157.69261 Y81.03482
G01 X-157.47953 Y80.96025
G01 X-157.27611 Y80.86228
G01 X-157.08497 Y80.74219
G01 X-156.90844 Y80.60142
G01 X-156.89734 Y80.59032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.71330 Y77.83033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.71330 Y77.83033
G01 X-153.70139 Y77.82396
G01 X-153.62150 Y77.77057
G01 X-153.58147 Y77.73770
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.05866 Y76.89142 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.05866 Y76.89142
G01 X-153.03149 Y76.86369
G01 X-153.03146 Y76.86364
G01 X-153.02409 Y76.82645
G01 X-153.03215 Y76.80224
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-152.99626 Y76.85607 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-152.99626 Y76.85607
G01 X-153.02318 Y76.82914
G01 X-153.03215 Y76.80224
G01 X-153.10520 Y76.59805
G01 X-153.13514 Y76.52556
G01 X-153.22415 Y76.33735
G01 X-153.25076 Y76.28749
G01 X-153.35465 Y76.11413
G01 X-153.37848 Y76.07845
G01 X-153.49651 Y75.91929
G01 X-153.51896 Y75.89193
G01 X-153.65079 Y75.74649
G01 X-153.67408 Y75.72320
G01 X-153.81952 Y75.59138
G01 X-153.84688 Y75.56892
G01 X-154.00603 Y75.45089
G01 X-154.04172 Y75.42706
G01 X-154.21508 Y75.32318
G01 X-154.26494 Y75.29656
G01 X-154.31152 Y75.27454
G01 X-154.45904 Y75.26727
G01 X-154.48795 Y75.26656
G01 X-155.48795 Y75.26656
G01 X-155.66321 Y75.24042
G01 X-155.85876 Y74.97281
G01 X-155.97794 Y74.68513
G01 X-156.29295 Y74.37014
G01 X-156.29112 Y74.36097
G01 X-156.26229 Y74.06834
G01 X-156.26229 Y73.97228
G01 X-156.29112 Y73.67964
G01 X-156.29295 Y73.67050
G01 X-155.97791 Y73.35549
G01 X-155.85876 Y73.06781
G01 X-155.85401 Y73.05661
G01 X-155.48795 Y72.87909
G01 X-153.48792 Y72.87909
G01 X-153.11048 Y73.06781
G01 X-153.04993 Y73.12836
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-151.23972 Y67.95032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-151.23972 Y67.95032
G01 X-151.16870 Y67.86373
G01 X-151.11534 Y67.78387
G01 X-151.02291 Y67.61097
G01 X-150.98615 Y67.52223
G01 X-150.92926 Y67.33465
G01 X-150.91051 Y67.24044
G01 X-150.89131 Y67.04534
G01 X-150.89131 Y66.94928
G01 X-150.91051 Y66.75418
G01 X-150.92926 Y66.65997
G01 X-150.98615 Y66.47239
G01 X-151.02291 Y66.38365
G01 X-151.11534 Y66.21075
G01 X-151.16870 Y66.13089
G01 X-151.29306 Y65.97935
G01 X-151.36098 Y65.91144
G01 X-151.38892 Y65.88850
G01 X-151.38892 Y64.05139
G01 X-145.10387 Y57.76632
G01 X-141.63598 Y57.76632
G01 X-141.57024 Y57.82027
G01 X-141.49039 Y57.87363
G01 X-141.35206 Y57.94757
G01 X-141.26334 Y57.98432
G01 X-141.11325 Y58.02984
G01 X-141.01904 Y58.04859
G01 X-140.86296 Y58.06395
G01 X-140.76692 Y58.06395
G01 X-140.61084 Y58.04859
G01 X-140.51663 Y58.02984
G01 X-140.36654 Y57.98432
G01 X-140.27782 Y57.94757
G01 X-140.13949 Y57.87363
G01 X-140.05963 Y57.82027
G01 X-139.93840 Y57.72077
G01 X-139.87048 Y57.65285
G01 X-139.77098 Y57.53162
G01 X-139.71762 Y57.45176
G01 X-139.64368 Y57.31343
G01 X-139.60693 Y57.22471
G01 X-139.56141 Y57.07462
G01 X-139.54266 Y56.98041
G01 X-139.52730 Y56.82433
G01 X-139.52730 Y56.72829
G01 X-139.54266 Y56.57221
G01 X-139.56141 Y56.47800
G01 X-139.60693 Y56.32791
G01 X-139.64368 Y56.23919
G01 X-139.71762 Y56.10086
G01 X-139.77098 Y56.02101
G01 X-139.82493 Y55.95527
G01 X-139.82493 Y55.91638
G01 X-139.17147 Y55.26292
G01 X-139.08684 Y55.25459
G01 X-138.99263 Y55.23584
G01 X-138.90490 Y55.20922
G01 X-138.84254 Y55.19032
G01 X-138.75382 Y55.15357
G01 X-138.61549 Y55.07963
G01 X-138.53563 Y55.02627
G01 X-138.50292 Y54.99942
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-144.01172 Y68.48733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-144.01172 Y68.48733
G01 X-140.54378 Y71.95529
G01 X-138.96093 Y71.95529
G01 X-138.86535 Y71.96471
G01 X-138.77343 Y71.99260
G01 X-138.68872 Y72.03786
G01 X-138.61445 Y72.09880
G01 X-138.55351 Y72.17307
G01 X-138.50825 Y72.25778
G01 X-138.48036 Y72.34970
G01 X-138.47094 Y72.44528
G01 X-138.47094 Y75.51053
G01 X-138.55727 Y75.64530
G01 X-138.57960 Y75.69026
G01 X-138.61912 Y75.76046
G01 X-138.66911 Y75.83930
G01 X-138.68419 Y75.86211
G01 X-138.74411 Y75.92203
G01 X-138.81663 Y75.96587
G01 X-138.90271 Y75.99234
G01 X-138.92024 Y75.99437
G01 X-138.96093 Y75.99554
G01 X-142.16095 Y75.99554
G01 X-142.20164 Y75.99437
G01 X-142.21911 Y75.99234
G01 X-142.28091 Y75.97459
G01 X-142.30517 Y75.96587
G01 X-142.34875 Y75.94101
G01 X-142.37774 Y75.92203
G01 X-142.43763 Y75.86211
G01 X-142.48149 Y75.78957
G01 X-142.50796 Y75.70347
G01 X-142.50999 Y75.68599
G01 X-142.51116 Y75.64530
G01 X-142.51116 Y74.21137
G01 X-142.51269 Y74.16544
G01 X-142.51523 Y74.12653
G01 X-142.53179 Y74.01315
G01 X-142.54916 Y73.98955
G01 X-142.59653 Y73.92783
G01 X-142.65742 Y73.85836
G01 X-145.57897 Y70.93680
G01 X-145.61255 Y70.90535
G01 X-145.64186 Y70.87968
G01 X-145.73371 Y70.81120
G01 X-145.76264 Y70.80680
G01 X-145.83976 Y70.79667
G01 X-145.93198 Y70.79057
G01 X-148.32080 Y70.79057
G01 X-148.36675 Y70.79210
G01 X-148.40566 Y70.79464
G01 X-148.54839 Y70.81844
G01 X-148.62550 Y70.83911
G01 X-148.84529 Y70.93200
G01 X-148.85054 Y70.93952
G01 X-148.88910 Y71.00632
G01 X-148.92520 Y71.08371
G01 X-148.94531 Y71.15877
G01 X-148.91872 Y71.25125
G01 X-148.88679 Y71.32839
G01 X-148.78214 Y71.51158
G01 X-148.73480 Y71.57330
G01 X-148.67384 Y71.64284
G01 X-148.36182 Y71.95486
G01 X-148.33680 Y71.97868
G01 X-148.31514 Y71.99832
G01 X-148.21196 Y72.07609
G01 X-148.21059 Y72.07627
G01 X-148.14567 Y72.08727
G01 X-148.13376 Y72.08983
G01 X-148.04173 Y72.10352
G01 X-147.92654 Y72.11297
G01 X-147.83434 Y72.12664
G01 X-147.76688 Y72.14007
G01 X-147.67648 Y72.16271
G01 X-147.46645 Y72.23019
G01 X-147.43378 Y72.24157
G01 X-147.40267 Y72.25661
G01 X-147.20643 Y72.35740
G01 X-147.12649 Y72.40530
G01 X-147.06929 Y72.44353
G01 X-146.99444 Y72.49905
G01 X-146.82622 Y72.64177
G01 X-146.80041 Y72.66479
G01 X-146.77740 Y72.69059
G01 X-146.63467 Y72.85882
G01 X-146.57915 Y72.93367
G01 X-146.54092 Y72.99087
G01 X-146.49302 Y73.07081
G01 X-146.39223 Y73.26705
G01 X-146.39000 Y73.27144
G01 X-146.37717 Y73.29821
G01 X-146.36582 Y73.33083
G01 X-146.29833 Y73.54088
G01 X-146.27570 Y73.63126
G01 X-146.26226 Y73.69872
G01 X-146.24859 Y73.79090
G01 X-146.23056 Y74.01078
G01 X-146.22858 Y74.04530
G01 X-146.23056 Y74.07985
G01 X-146.24859 Y74.29971
G01 X-146.26226 Y74.39189
G01 X-146.27570 Y74.45935
G01 X-146.29833 Y74.54977
G01 X-146.36582 Y74.75978
G01 X-146.37719 Y74.79242
G01 X-146.38992 Y74.81901
G01 X-146.39223 Y74.82356
G01 X-146.49302 Y75.01980
G01 X-146.54092 Y75.09973
G01 X-146.57915 Y75.15693
G01 X-146.63465 Y75.23179
G01 X-146.77740 Y75.40001
G01 X-146.80041 Y75.42582
G01 X-146.82622 Y75.44883
G01 X-146.99444 Y75.59155
G01 X-147.06929 Y75.64708
G01 X-147.12649 Y75.68530
G01 X-147.20643 Y75.73321
G01 X-147.40267 Y75.83400
G01 X-147.43378 Y75.84903
G01 X-147.46645 Y75.86041
G01 X-147.55931 Y75.89026
G01 X-147.67648 Y75.92790
G01 X-147.76688 Y75.95053
G01 X-147.83434 Y75.96397
G01 X-147.92652 Y75.97763
G01 X-148.14641 Y75.99567
G01 X-148.18092 Y75.99765
G01 X-148.21547 Y75.99567
G01 X-148.43533 Y75.97763
G01 X-148.52751 Y75.96397
G01 X-148.59497 Y75.95053
G01 X-148.68537 Y75.92790
G01 X-148.89540 Y75.86041
G01 X-148.92807 Y75.84903
G01 X-148.95918 Y75.83400
G01 X-149.15542 Y75.73321
G01 X-149.23535 Y75.68530
G01 X-149.29256 Y75.64708
G01 X-149.34463 Y75.60844
G01 X-149.36738 Y75.59158
G01 X-149.53563 Y75.44883
G01 X-149.56144 Y75.42582
G01 X-149.58445 Y75.40001
G01 X-149.72717 Y75.23179
G01 X-149.78270 Y75.15693
G01 X-149.82093 Y75.09973
G01 X-149.86883 Y75.01980
G01 X-149.97193 Y74.81906
G01 X-149.98465 Y74.79242
G01 X-149.99603 Y74.75978
G01 X-150.06352 Y74.54975
G01 X-150.08615 Y74.45935
G01 X-150.09959 Y74.39189
G01 X-150.11325 Y74.29968
G01 X-150.12240 Y74.18818
G01 X-150.12268 Y74.18483
G01 X-150.12639 Y74.15010
G01 X-150.13020 Y74.12112
G01 X-150.13675 Y74.08038
G01 X-150.14942 Y74.01404
G01 X-150.16312 Y73.99559
G01 X-150.21046 Y73.93390
G01 X-150.27137 Y73.86440
G01 X-150.94897 Y73.18681
G01 X-150.98254 Y73.15536
G01 X-151.01186 Y73.12968
G01 X-151.10370 Y73.06121
G01 X-151.13263 Y73.05681
G01 X-151.20975 Y73.04668
G01 X-151.30197 Y73.04058
G01 X-152.63845 Y73.04058
G01 X-152.73067 Y73.04668
G01 X-152.80779 Y73.05681
G01 X-153.01134 Y73.11239
G01 X-153.04993 Y73.12836
G01 X-153.06590 Y73.16689
G01 X-153.12145 Y73.37048
G01 X-153.13161 Y73.44759
G01 X-153.13768 Y73.53982
G01 X-153.13768 Y73.90532
G01 X-153.13619 Y73.95125
G01 X-153.13362 Y73.99016
G01 X-153.11708 Y74.10362
G01 X-153.09971 Y74.12717
G01 X-153.05237 Y74.18886
G01 X-152.99146 Y74.25836
G01 X-149.70269 Y77.54712
G01 X-149.64290 Y77.60046
G01 X-149.61107 Y77.62576
G01 X-149.58648 Y77.63694
G01 X-149.57780 Y77.64080
G01 X-149.52575 Y77.66361
G01 X-149.51468 Y77.66945
G01 X-149.37658 Y77.74375
G01 X-149.35674 Y77.75479
G01 X-149.31958 Y77.78256
G01 X-149.20724 Y77.87232
G01 X-149.19774 Y77.88129
G01 X-149.18923 Y77.88949
G01 X-149.15001 Y77.93105
G01 X-149.07904 Y78.01271
G01 X-149.05019 Y78.05200
G01 X-149.01227 Y78.10940
G01 X-148.97526 Y78.17184
G01 X-148.93840 Y78.24778
G01 X-148.91138 Y78.31113
G01 X-148.89860 Y78.34570
G01 X-148.86645 Y78.46140
G01 X-148.85834 Y78.49345
G01 X-148.85123 Y78.52871
G01 X-148.85103 Y78.52983
G01 X-148.83698 Y78.68487
G01 X-148.83472 Y78.71931
G01 X-148.83698 Y78.75378
G01 X-148.85105 Y78.90889
G01 X-148.85123 Y78.90999
G01 X-148.86642 Y78.97730
G01 X-148.89860 Y79.09294
G01 X-148.91138 Y79.12751
G01 X-148.93840 Y79.19091
G01 X-148.97526 Y79.26683
G01 X-149.01227 Y79.32924
G01 X-149.05019 Y79.38667
G01 X-149.07904 Y79.42599
G01 X-149.15001 Y79.50760
G01 X-149.19774 Y79.55736
G01 X-149.20724 Y79.56632
G01 X-149.31958 Y79.65614
G01 X-149.35677 Y79.68390
G01 X-149.37653 Y79.69495
G01 X-149.51463 Y79.76919
G01 X-149.52418 Y79.77427
G01 X-149.57886 Y79.79447
G01 X-149.70439 Y79.83503
G01 X-149.72870 Y79.84072
G01 X-149.79647 Y79.85311
G01 X-149.89192 Y79.86579
G01 X-149.95252 Y79.86874
G01 X-150.02133 Y79.86874
G01 X-150.08194 Y79.86579
G01 X-150.17736 Y79.85311
G01 X-150.24511 Y79.84072
G01 X-150.26944 Y79.83503
G01 X-150.39497 Y79.79447
G01 X-150.44965 Y79.77427
G01 X-150.45920 Y79.76919
G01 X-150.59733 Y79.69495
G01 X-150.61706 Y79.68390
G01 X-150.65427 Y79.65614
G01 X-150.76662 Y79.56632
G01 X-150.77612 Y79.55736
G01 X-150.82385 Y79.50760
G01 X-150.89481 Y79.42599
G01 X-150.92367 Y79.38667
G01 X-150.96161 Y79.32921
G01 X-150.99857 Y79.26683
G01 X-151.03545 Y79.19083
G01 X-151.06245 Y79.12756
G01 X-151.07523 Y79.09294
G01 X-151.10741 Y78.97732
G01 X-151.12263 Y78.90999
G01 X-151.12280 Y78.90887
G01 X-151.13688 Y78.75378
G01 X-151.13975 Y78.68997
G01 X-151.13975 Y78.68642
G01 X-151.13972 Y78.68504
G01 X-151.13972 Y78.68459
G01 X-151.14018 Y78.65241
G01 X-151.14048 Y78.63356
G01 X-151.14747 Y78.54369
G01 X-151.18028 Y78.49739
G01 X-151.22763 Y78.43567
G01 X-151.28854 Y78.36617
G01 X-152.52933 Y77.12536
G01 X-152.56291 Y77.09391
G01 X-152.59222 Y77.06823
G01 X-152.70997 Y76.98411
G01 X-152.77914 Y76.94420
G01 X-152.99626 Y76.85607
G01 X-153.00017 Y76.85449
G01 X-153.00919 Y76.85609
G01 X-153.02935 Y76.86148
G01 X-153.03146 Y76.86364
G01 X-153.05866 Y76.89142
G01 X-153.07525 Y76.90750
G01 X-153.19864 Y77.05383
G01 X-153.22018 Y77.08601
G01 X-153.24106 Y77.11565
G01 X-153.26600 Y77.14926
G01 X-153.31660 Y77.22769
G01 X-153.34652 Y77.28154
G01 X-153.36473 Y77.31243
G01 X-153.38373 Y77.33976
G01 X-153.39747 Y77.36031
G01 X-153.42917 Y77.40946
G01 X-153.48406 Y77.51103
G01 X-153.51020 Y77.56953
G01 X-153.51833 Y77.58723
G01 X-153.54645 Y77.64667
G01 X-153.58389 Y77.74397
G01 X-153.56504 Y77.81428
G01 X-153.52895 Y77.89170
G01 X-153.49039 Y77.95848
G01 X-153.41254 Y78.05995
G01 X-153.33850 Y78.13399
G01 X-153.24152 Y78.26033
G01 X-153.26004 Y78.26033
G01 X-153.27769 Y78.23389
G01 X-153.40205 Y78.08235
G01 X-153.46260 Y78.02183
G01 X-153.46997 Y78.01443
G01 X-153.62150 Y77.89008
G01 X-153.70139 Y77.83671
G01 X-153.71330 Y77.83033
G01 X-156.20992 Y77.83033
G01 X-156.23648 Y77.82967
G01 X-156.43250 Y77.82007
G01 X-156.48794 Y77.81459
G01 X-156.68398 Y77.78550
G01 X-156.74692 Y77.77296
G01 X-156.94296 Y77.72383
G01 X-156.97727 Y77.71441
G01 X-157.00963 Y77.68926
G01 X-157.16117 Y77.56490
G01 X-157.17237 Y77.55553
G01 X-157.19005 Y77.54047
G01 X-157.23171 Y77.50732
G01 X-157.47044 Y77.33023
G01 X-157.54438 Y77.28088
G01 X-157.67456 Y77.20285
G01 X-158.31893 Y76.55848
G01 X-158.33661 Y76.48987
G01 X-158.36853 Y76.41276
G01 X-158.47318 Y76.22958
G01 X-158.52053 Y76.16785
G01 X-158.58149 Y76.09831
G01 X-158.66300 Y76.01680
G01 X-158.69655 Y75.98535
G01 X-158.72586 Y75.95965
G01 X-158.81773 Y75.89120
G01 X-158.84666 Y75.88680
G01 X-158.92378 Y75.87664
G01 X-159.01603 Y75.87057
G01 X-159.24994 Y75.87057
G01 X-159.28433 Y75.86973
G01 X-159.37087 Y75.86547
G01 X-159.57704 Y75.84177
G01 X-159.61125 Y75.83697
G01 X-159.64473 Y75.82831
G01 X-159.84430 Y75.77131
G01 X-159.92588 Y75.74212
G01 X-159.98944 Y75.71578
G01 X-160.06777 Y75.67875
G01 X-160.24918 Y75.57794
G01 X-160.27897 Y75.56041
G01 X-160.30655 Y75.53958
G01 X-160.46911 Y75.41058
G01 X-160.53333 Y75.35236
G01 X-160.58199 Y75.30369
G01 X-160.64016 Y75.23951
G01 X-160.76919 Y75.07695
G01 X-160.78999 Y75.04936
G01 X-160.80749 Y75.01962
G01 X-160.83401 Y74.97189
G01 X-160.90833 Y74.83816
G01 X-160.94536 Y74.75988
G01 X-160.97173 Y74.69625
G01 X-161.00091 Y74.61472
G01 X-161.05789 Y74.41510
G01 X-161.06655 Y74.38167
G01 X-161.07135 Y74.34746
G01 X-161.09507 Y74.14124
G01 X-161.09934 Y74.05475
G01 X-161.09934 Y73.98589
G01 X-161.09507 Y73.89941
G01 X-161.07135 Y73.69318
G01 X-161.06655 Y73.65897
G01 X-161.05789 Y73.62554
G01 X-161.00091 Y73.42595
G01 X-160.97173 Y73.34439
G01 X-160.95288 Y73.29717
G01 X-160.94539 Y73.28079
G01 X-160.90836 Y73.20251
G01 X-160.80749 Y73.02105
G01 X-160.78999 Y72.99130
G01 X-160.76919 Y72.96369
G01 X-160.64016 Y72.80113
G01 X-160.58199 Y72.73695
G01 X-160.53330 Y72.68826
G01 X-160.46911 Y72.63009
G01 X-160.30655 Y72.50106
G01 X-160.27894 Y72.48026
G01 X-160.24920 Y72.46276
G01 X-160.06777 Y72.36192
G01 X-159.98946 Y72.32486
G01 X-159.92583 Y72.29852
G01 X-159.84430 Y72.26933
G01 X-159.64471 Y72.21236
G01 X-159.61128 Y72.20370
G01 X-159.57707 Y72.19890
G01 X-159.37084 Y72.17518
G01 X-159.28436 Y72.17091
G01 X-159.24994 Y72.17007
G01 X-159.01603 Y72.17007
G01 X-158.97008 Y72.16857
G01 X-158.93117 Y72.16601
G01 X-158.81773 Y72.14945
G01 X-158.79426 Y72.13215
G01 X-158.73254 Y72.08480
G01 X-158.66300 Y72.02384
G01 X-158.28200 Y71.64284
G01 X-158.25055 Y71.60929
G01 X-158.22485 Y71.57998
G01 X-158.14075 Y71.46220
G01 X-158.10082 Y71.39306
G01 X-158.01113 Y71.17203
G01 X-158.01273 Y71.16299
G01 X-158.03270 Y71.08849
G01 X-158.06191 Y71.00822
G01 X-158.10074 Y70.94094
G01 X-158.11989 Y70.93032
G01 X-158.18497 Y70.89431
G01 X-158.24994 Y70.86741
G01 X-158.25456 Y70.86548
G01 X-158.26208 Y70.86235
G01 X-158.46566 Y70.80680
G01 X-158.54278 Y70.79664
G01 X-158.63503 Y70.79057
G01 X-159.24994 Y70.79057
G01 X-159.28433 Y70.78973
G01 X-159.37087 Y70.78547
G01 X-159.57704 Y70.76177
G01 X-159.61125 Y70.75697
G01 X-159.64473 Y70.74831
G01 X-159.84430 Y70.69131
G01 X-159.92588 Y70.66212
G01 X-159.98944 Y70.63578
G01 X-160.06777 Y70.59875
G01 X-160.24918 Y70.49794
G01 X-160.27897 Y70.48041
G01 X-160.30655 Y70.45958
G01 X-160.46911 Y70.33058
G01 X-160.53333 Y70.27236
G01 X-160.58199 Y70.22369
G01 X-160.64016 Y70.15951
G01 X-160.76919 Y69.99695
G01 X-160.78999 Y69.96936
G01 X-160.80749 Y69.93962
G01 X-160.90833 Y69.75819
G01 X-160.94536 Y69.67988
G01 X-160.97173 Y69.61625
G01 X-161.00091 Y69.53472
G01 X-161.05789 Y69.33510
G01 X-161.06655 Y69.30168
G01 X-161.07135 Y69.26746
G01 X-161.09507 Y69.06124
G01 X-161.09934 Y68.97475
G01 X-161.09934 Y68.90589
G01 X-161.09507 Y68.81941
G01 X-161.07135 Y68.61318
G01 X-161.06655 Y68.57894
G01 X-161.05789 Y68.54554
G01 X-161.05105 Y68.52159
G01 X-161.00091 Y68.34595
G01 X-160.97897 Y68.28461
G01 X-160.97173 Y68.26442
G01 X-160.94539 Y68.20079
G01 X-160.90836 Y68.12248
G01 X-160.80749 Y67.94105
G01 X-160.78999 Y67.91130
G01 X-160.76919 Y67.88369
G01 X-160.64016 Y67.72113
G01 X-160.58199 Y67.65695
G01 X-160.53330 Y67.60826
G01 X-160.46911 Y67.55009
G01 X-160.30655 Y67.42106
G01 X-160.27894 Y67.40026
G01 X-160.24920 Y67.38276
G01 X-160.06777 Y67.28192
G01 X-159.98946 Y67.24486
G01 X-159.92583 Y67.21852
G01 X-159.84430 Y67.18933
G01 X-159.64471 Y67.13236
G01 X-159.61128 Y67.12370
G01 X-159.57707 Y67.11890
G01 X-159.37084 Y67.09518
G01 X-159.28436 Y67.09091
G01 X-159.24994 Y67.09007
G01 X-158.24994 Y67.09007
G01 X-158.21550 Y67.09091
G01 X-158.12901 Y67.09518
G01 X-157.92279 Y67.11890
G01 X-157.88858 Y67.12370
G01 X-157.85515 Y67.13236
G01 X-157.72561 Y67.16934
G01 X-157.65553 Y67.18933
G01 X-157.57400 Y67.21852
G01 X-157.51037 Y67.24488
G01 X-157.43206 Y67.28192
G01 X-157.38868 Y67.30602
G01 X-157.25063 Y67.38276
G01 X-157.22089 Y67.40026
G01 X-157.19330 Y67.42106
G01 X-157.03074 Y67.55009
G01 X-156.96656 Y67.60826
G01 X-156.91789 Y67.65692
G01 X-156.85967 Y67.72113
G01 X-156.73067 Y67.88369
G01 X-156.72132 Y67.89573
G01 X-156.68845 Y67.93902
G01 X-156.67882 Y67.95144
G01 X-156.64210 Y67.99772
G01 X-156.59290 Y68.05385
G01 X-156.49330 Y68.07384
G01 X-156.41619 Y68.08400
G01 X-156.32396 Y68.09007
G01 X-154.13286 Y68.09007
G01 X-154.06722 Y68.08700
G01 X-154.01182 Y68.08181
G01 X-153.84459 Y68.04646
G01 X-153.76745 Y68.02108
G01 X-153.61437 Y67.95032
G01 X-153.51812 Y67.95032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-153.61434 Y67.95032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-153.61434 Y67.95032
G01 X-153.60276 Y67.94496
G01 X-153.57060 Y67.88588
G01 X-153.57157 Y67.87767
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-157.15861 Y60.07833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-157.15861 Y60.07833
G01 X-157.16046 Y60.11284
G01 X-157.17999 Y60.36245
G01 X-157.20196 Y60.52242
G01 X-157.21466 Y60.59014
G01 X-157.22734 Y60.64322
G01 X-157.30953 Y60.91597
G01 X-157.33445 Y60.98399
G01 X-157.36125 Y61.04741
G01 X-157.42360 Y61.17682
G01 X-157.55388 Y61.41122
G01 X-157.56221 Y61.42580
G01 X-157.59287 Y61.46819
G01 X-157.73615 Y61.65145
G01 X-157.85459 Y61.78599
G01 X-157.90262 Y61.83545
G01 X-157.92950 Y61.86052
G01 X-158.14870 Y62.04243
G01 X-158.22142 Y62.09595
G01 X-158.27877 Y62.13397
G01 X-158.38697 Y62.19829
G01 X-158.63991 Y62.32937
G01 X-158.64087 Y62.32981
G01 X-158.70524 Y62.35485
G01 X-158.90907 Y62.42280
G01 X-158.91776 Y62.42513
G01 X-159.09927 Y62.47413
G01 X-159.16668 Y62.48881
G01 X-159.18532 Y62.49193
G01 X-159.46856 Y62.52241
G01 X-159.57651 Y62.52772
G01 X-159.64537 Y62.52772
G01 X-159.75327 Y62.52241
G01 X-160.03650 Y62.49193
G01 X-160.05517 Y62.48881
G01 X-160.12258 Y62.47413
G01 X-160.31283 Y62.42277
G01 X-160.51661 Y62.35485
G01 X-160.58098 Y62.32981
G01 X-160.58194 Y62.32937
G01 X-160.83485 Y62.19829
G01 X-160.94308 Y62.13397
G01 X-161.00043 Y62.09592
G01 X-161.07315 Y62.04243
G01 X-161.29235 Y61.86052
G01 X-161.31923 Y61.83545
G01 X-161.36726 Y61.78599
G01 X-161.48570 Y61.65145
G01 X-161.62898 Y61.46819
G01 X-161.65964 Y61.42580
G01 X-161.66797 Y61.41122
G01 X-161.79825 Y61.17682
G01 X-161.86060 Y61.04741
G01 X-161.88740 Y60.98399
G01 X-161.89995 Y60.94972
G01 X-161.91232 Y60.91592
G01 X-161.98082 Y60.68866
G01 X-161.99449 Y60.64330
G01 X-162.00719 Y60.59014
G01 X-162.01989 Y60.52242
G01 X-162.04183 Y60.36245
G01 X-162.06139 Y60.11284
G01 X-162.06324 Y60.07833
G01 X-162.06139 Y60.04378
G01 X-162.04183 Y59.79420
G01 X-162.01989 Y59.63423
G01 X-162.00719 Y59.56652
G01 X-161.99449 Y59.51340
G01 X-161.91232 Y59.24068
G01 X-161.88740 Y59.17266
G01 X-161.86060 Y59.10924
G01 X-161.79825 Y58.97983
G01 X-161.66797 Y58.74544
G01 X-161.65964 Y58.73086
G01 X-161.62898 Y58.68846
G01 X-161.48570 Y58.50520
G01 X-161.36726 Y58.37066
G01 X-161.31923 Y58.32120
G01 X-161.29235 Y58.29613
G01 X-161.07315 Y58.11422
G01 X-161.00043 Y58.06070
G01 X-160.94308 Y58.02268
G01 X-160.83487 Y57.95837
G01 X-160.58194 Y57.82728
G01 X-160.58098 Y57.82684
G01 X-160.51661 Y57.80180
G01 X-160.31283 Y57.73388
G01 X-160.12258 Y57.68252
G01 X-160.05517 Y57.66784
G01 X-160.03653 Y57.66472
G01 X-159.75327 Y57.63424
G01 X-159.64537 Y57.62893
G01 X-159.57651 Y57.62893
G01 X-159.46851 Y57.63424
G01 X-159.41286 Y57.64020
G01 X-159.18535 Y57.66472
G01 X-159.16668 Y57.66784
G01 X-159.09927 Y57.68252
G01 X-158.90902 Y57.73388
G01 X-158.70524 Y57.80180
G01 X-158.64087 Y57.82684
G01 X-158.63991 Y57.82728
G01 X-158.38697 Y57.95837
G01 X-158.27877 Y58.02268
G01 X-158.22142 Y58.06070
G01 X-158.14870 Y58.11422
G01 X-157.92950 Y58.29613
G01 X-157.90262 Y58.32120
G01 X-157.85459 Y58.37066
G01 X-157.73615 Y58.50520
G01 X-157.59287 Y58.68846
G01 X-157.56221 Y58.73086
G01 X-157.55388 Y58.74544
G01 X-157.42365 Y58.97972
G01 X-157.36125 Y59.10924
G01 X-157.33445 Y59.17266
G01 X-157.30953 Y59.24068
G01 X-157.22734 Y59.51343
G01 X-157.21466 Y59.56652
G01 X-157.20196 Y59.63423
G01 X-157.17999 Y59.79420
G01 X-157.16046 Y60.04378
G01 X-157.15861 Y60.07833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-144.12190 Y49.35965 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-144.12190 Y49.35965
G01 X-144.13282 Y49.41728
G01 X-144.14133 Y49.50225
G01 X-144.13498 Y49.58739
G01 X-144.12404 Y49.63042
G01 X-144.09533 Y49.66364
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-142.93334 Y48.48927 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-142.93334 Y48.48927
G01 X-142.92851 Y48.44032
G01 X-142.91622 Y48.35447
G01 X-142.91497 Y48.34797
G01 X-142.90435 Y48.27502
G01 X-142.90103 Y48.24132
G01 X-142.89107 Y48.17368
G01 X-142.87108 Y48.07319
G01 X-142.86476 Y48.04495
G01 X-142.82206 Y47.87446
G01 X-142.81296 Y47.82890
G01 X-142.75480 Y47.43682
G01 X-142.75155 Y47.40383
G01 X-142.73227 Y47.01175
G01 X-142.73227 Y46.98287
G01 X-142.75155 Y46.59082
G01 X-142.75480 Y46.55783
G01 X-142.81296 Y46.16575
G01 X-142.82206 Y46.12019
G01 X-142.92025 Y45.72814
G01 X-142.94085 Y45.66040
G01 X-143.07494 Y45.28567
G01 X-143.07491 Y43.70897
G01 X-142.94085 Y43.33426
G01 X-142.92025 Y43.26652
G01 X-142.82206 Y42.87447
G01 X-142.81296 Y42.82891
G01 X-142.75480 Y42.43683
G01 X-142.75155 Y42.40384
G01 X-142.73227 Y42.01176
G01 X-142.73227 Y41.98288
G01 X-142.75155 Y41.59083
G01 X-142.75480 Y41.55784
G01 X-142.81296 Y41.16576
G01 X-142.82206 Y41.12020
G01 X-142.92025 Y40.72815
G01 X-142.94085 Y40.66041
G01 X-143.07494 Y40.28568
G01 X-143.07494 Y38.67382
G01 X-143.38894 Y38.67382
G01 X-143.38894 Y38.68380
G01 X-143.39836 Y38.77941
G01 X-143.42625 Y38.87133
G01 X-143.47151 Y38.95604
G01 X-143.53245 Y39.03029
G01 X-143.60671 Y39.09125
G01 X-143.69142 Y39.13651
G01 X-143.78335 Y39.16440
G01 X-143.87893 Y39.17382
G01 X-145.87895 Y39.17382
G01 X-145.97453 Y39.16440
G01 X-146.06645 Y39.13651
G01 X-146.15116 Y39.09125
G01 X-146.22543 Y39.03029
G01 X-146.25525 Y38.99396
G01 X-146.28636 Y38.95604
G01 X-146.33163 Y38.87133
G01 X-146.35952 Y38.77941
G01 X-146.36894 Y38.68380
G01 X-146.36894 Y36.68381
G01 X-146.35952 Y36.58823
G01 X-146.33163 Y36.49630
G01 X-146.28636 Y36.41157
G01 X-146.22543 Y36.33733
G01 X-146.15116 Y36.27639
G01 X-146.06645 Y36.23110
G01 X-145.97453 Y36.20324
G01 X-145.87895 Y36.19382
G01 X-143.87893 Y36.19382
G01 X-143.78335 Y36.20324
G01 X-143.69142 Y36.23110
G01 X-143.60671 Y36.27639
G01 X-143.53245 Y36.33733
G01 X-143.47151 Y36.41157
G01 X-143.42625 Y36.49630
G01 X-143.39836 Y36.58823
G01 X-143.38894 Y36.68381
G01 X-143.38894 Y36.69382
G01 X-143.07494 Y36.69382
G01 X-143.07494 Y34.17030
G01 X-143.07258 Y34.12229
G01 X-143.06298 Y34.02473
G01 X-143.04423 Y33.93052
G01 X-143.01578 Y33.83672
G01 X-142.97903 Y33.74797
G01 X-142.93280 Y33.66154
G01 X-142.87944 Y33.58168
G01 X-142.81726 Y33.50591
G01 X-142.78497 Y33.47028
G01 X-141.85094 Y32.53624
G01 X-141.85094 Y31.84630
G01 X-141.84152 Y31.75072
G01 X-141.81363 Y31.65880
G01 X-141.76836 Y31.57409
G01 X-141.70743 Y31.49982
G01 X-141.63316 Y31.43889
G01 X-141.54845 Y31.39362
G01 X-141.45653 Y31.36573
G01 X-141.36095 Y31.35631
G01 X-139.87937 Y31.35631
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.87934 Y34.08097 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.87934 Y34.08097
G01 X-139.87937 Y35.53192
G01 X-139.94749 Y35.57741
G01 X-140.07629 Y35.68312
G01 X-140.14421 Y35.75104
G01 X-140.24990 Y35.87985
G01 X-140.30329 Y35.95973
G01 X-140.38183 Y36.10667
G01 X-140.41858 Y36.19542
G01 X-140.46697 Y36.35488
G01 X-140.48569 Y36.44909
G01 X-140.50202 Y36.61492
G01 X-140.50202 Y36.71096
G01 X-140.48569 Y36.87680
G01 X-140.46697 Y36.97101
G01 X-140.41858 Y37.13047
G01 X-140.38183 Y37.21921
G01 X-140.30329 Y37.36615
G01 X-140.24990 Y37.44604
G01 X-140.14421 Y37.57484
G01 X-140.07629 Y37.64276
G01 X-140.04558 Y37.66796
G01 X-139.94749 Y37.74847
G01 X-139.86761 Y37.80184
G01 X-139.72067 Y37.88038
G01 X-139.64203 Y37.91294
G01 X-138.85544 Y37.91294
G01 X-138.71412 Y37.84611
G01 X-138.65252 Y37.81324
G01 X-138.50518 Y37.72493
G01 X-138.45798 Y37.69343
G01 X-138.32270 Y37.59310
G01 X-138.28453 Y37.56178
G01 X-138.16093 Y37.44977
G01 X-138.12760 Y37.41642
G01 X-138.05961 Y37.34141
G01 X-138.03616 Y37.27588
G01 X-138.02334 Y37.23369
G01 X-137.98161 Y37.06707
G01 X-137.97518 Y37.03494
G01 X-137.95047 Y36.86829
G01 X-137.94785 Y36.84187
G01 X-137.93967 Y36.67522
G01 X-137.93967 Y36.65066
G01 X-137.94785 Y36.48404
G01 X-137.95047 Y36.45762
G01 X-137.97518 Y36.29097
G01 X-137.98161 Y36.25884
G01 X-138.02334 Y36.09222
G01 X-138.03616 Y36.05003
G01 X-138.09578 Y35.88338
G01 X-138.11968 Y35.82587
G01 X-138.19847 Y35.65927
G01 X-138.24099 Y35.57997
G01 X-138.25186 Y35.56184
G01 X-138.25186 Y30.61186
G01 X-138.25293 Y30.56886
G01 X-138.25628 Y30.50023
G01 X-138.26492 Y30.41283
G01 X-138.27510 Y30.34422
G01 X-138.29347 Y30.25212
G01 X-138.30434 Y30.20864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.41384 Y27.02594 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.41384 Y27.02594
G01 X-139.44589 Y27.06501
G01 X-139.49926 Y27.14489
G01 X-139.57319 Y27.28319
G01 X-139.60995 Y27.37194
G01 X-139.65547 Y27.52200
G01 X-139.67421 Y27.61621
G01 X-139.68958 Y27.77229
G01 X-139.68958 Y27.86833
G01 X-139.67421 Y28.02441
G01 X-139.65547 Y28.11862
G01 X-139.64807 Y28.14303
G01 X-139.60995 Y28.26871
G01 X-139.57319 Y28.35746
G01 X-139.49926 Y28.49576
G01 X-139.44589 Y28.57565
G01 X-139.34640 Y28.69688
G01 X-139.27848 Y28.76480
G01 X-139.15724 Y28.86427
G01 X-139.07739 Y28.91766
G01 X-138.93906 Y28.99157
G01 X-138.85034 Y29.02832
G01 X-138.70025 Y29.07384
G01 X-138.60604 Y29.09261
G01 X-138.44996 Y29.10795
G01 X-138.35392 Y29.10795
G01 X-138.30688 Y29.10333
G01 X-138.30436 Y29.10584
G01 X-138.30436 Y29.51870
G01 X-138.30434 Y30.20864
G01 X-138.31622 Y30.18644
G01 X-138.36959 Y30.10658
G01 X-138.41310 Y30.05354
G01 X-138.44541 Y30.01791
G01 X-140.79092 Y27.67237
G01 X-140.08810 Y26.96958
G01 X-139.86090 Y26.74235
G01 X-139.82862 Y26.70671
G01 X-139.82768 Y26.70560
G01 X-139.82727 Y26.70298
G01 X-139.81033 Y26.59490
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-139.82725 Y26.70298 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-139.82725 Y26.70298
G01 X-139.82727 Y26.70298
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-142.39773 Y22.62770 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-142.39773 Y22.62770
G01 X-142.39323 Y22.61853
G01 X-142.39303 Y22.61813
G01 X-142.40306 Y22.51604
G01 X-142.40309 Y22.51602
G01 X-142.43257 Y22.47213
G01 X-142.47629 Y22.39895
G01 X-142.54464 Y22.25694
G01 X-142.56234 Y22.20881
G01 X-142.57022 Y22.18836
G01 X-142.58927 Y22.14104
G01 X-142.61690 Y22.05793
G01 X-142.62325 Y22.03403
G01 X-142.66011 Y21.92118
G01 X-142.69435 Y21.81630
G01 X-142.70585 Y21.78374
G01 X-142.72074 Y21.75254
G01 X-142.82442 Y21.54835
G01 X-142.90636 Y21.40721
G01 X-142.94385 Y21.34935
G01 X-142.96222 Y21.32387
G01 X-143.12792 Y21.11902
G01 X-143.19333 Y21.04688
G01 X-143.24197 Y20.99824
G01 X-143.31416 Y20.93281
G01 X-143.43824 Y20.83240
G01 X-143.51893 Y20.76713
G01 X-143.54443 Y20.74876
G01 X-143.60230 Y20.71127
G01 X-143.69252 Y20.65890
G01 X-143.74258 Y20.62984
G01 X-143.75322 Y20.62367
G01 X-143.83912 Y20.56748
G01 X-143.86739 Y20.54808
G01 X-143.93277 Y20.49784
G01 X-143.99480 Y20.44460
G01 X-144.03290 Y20.41000
G01 X-144.09533 Y20.35013
G01 X-144.11944 Y20.32225
G01 X-144.34652 Y20.25336
G01 X-144.44072 Y20.23462
G01 X-144.83092 Y20.19619
G01 X-144.87895 Y20.19382
G01 X-152.37954 Y20.19382
G01 X-158.11281 Y20.20114
G01 X-158.18990 Y20.17777
G01 X-158.28410 Y20.15905
G01 X-158.67430 Y20.12070
G01 X-158.77034 Y20.12070
G01 X-159.16051 Y20.15918
G01 X-159.25472 Y20.17795
G01 X-159.43673 Y20.23319
G01 X-159.43968 Y20.23662
G01 X-159.50160 Y20.29824
G01 X-159.60168 Y20.38481
G01 X-159.66388 Y20.43096
G01 X-159.67539 Y20.43934
G01 X-159.73871 Y20.48448
G01 X-159.82370 Y20.53662
G01 X-159.82863 Y20.53919
G01 X-159.83531 Y20.54262
G01 X-159.85741 Y20.55384
G01 X-159.99886 Y20.63596
G01 X-160.05669 Y20.67345
G01 X-160.08189 Y20.69161
G01 X-160.28669 Y20.85732
G01 X-160.35913 Y20.92298
G01 X-160.40780 Y20.97167
G01 X-160.47295 Y21.04353
G01 X-160.63853 Y21.24825
G01 X-160.65720 Y21.27419
G01 X-160.68451 Y21.31506
G01 X-160.69467 Y21.33200
G01 X-160.77640 Y21.47284
G01 X-160.88026 Y21.67736
G01 X-160.89497 Y21.70822
G01 X-160.90665 Y21.74117
G01 X-160.97757 Y21.95846
G01 X-161.01953 Y22.11663
G01 X-161.03391 Y22.18401
G01 X-161.03457 Y22.18803
G01 X-161.03891 Y22.21470
G01 X-161.04417 Y22.26443
G01 X-161.05474 Y22.36479
G01 X-161.06655 Y22.47665
G01 X-161.07132 Y22.57390
G01 X-161.07216 Y22.60847
G01 X-161.07132 Y22.64309
G01 X-161.06655 Y22.74000
G01 X-161.04587 Y22.93573
G01 X-161.04547 Y22.93954
G01 X-161.03886 Y23.00200
G01 X-161.03376 Y23.03339
G01 X-161.02990 Y23.05496
G01 X-161.01935 Y23.10080
G01 X-160.97757 Y23.25818
G01 X-160.90638 Y23.47621
G01 X-160.89497 Y23.50842
G01 X-160.87993 Y23.53994
G01 X-160.77643 Y23.74380
G01 X-160.69429 Y23.88528
G01 X-160.65679 Y23.94312
G01 X-160.63866 Y23.96831
G01 X-160.47292 Y24.17316
G01 X-160.40729 Y24.24555
G01 X-160.38354 Y24.27047
G01 X-160.30005 Y24.35399
G01 X-160.27511 Y24.37771
G01 X-160.20323 Y24.44284
G01 X-159.99840 Y24.60855
G01 X-159.97267 Y24.62709
G01 X-159.91481 Y24.66455
G01 X-159.77392 Y24.74634
G01 X-159.56952 Y24.85013
G01 X-159.53853 Y24.86491
G01 X-159.50579 Y24.87649
G01 X-159.28824 Y24.94751
G01 X-159.13041 Y24.98942
G01 X-159.06302 Y25.00380
G01 X-159.03211 Y25.00880
G01 X-158.77011 Y25.03646
G01 X-158.67285 Y25.04124
G01 X-158.63843 Y25.04207
G01 X-152.38691 Y25.04207
G01 X-152.35252 Y25.04124
G01 X-152.28828 Y25.03809
G01 X-152.25516 Y25.03809
G01 X-152.21196 Y25.03567
G01 X-152.19181 Y25.03481
G01 X-152.17513 Y25.03435
G01 X-152.15592 Y25.03412
G01 X-144.87895 Y25.03412
G01 X-144.84453 Y25.03326
G01 X-144.74728 Y25.02848
G01 X-144.48525 Y25.00080
G01 X-144.45424 Y24.99574
G01 X-144.38682 Y24.98137
G01 X-144.22907 Y24.93948
G01 X-144.05259 Y24.88188
G01 X-144.01139 Y24.86841
G01 X-143.97882 Y24.85691
G01 X-143.94763 Y24.84205
G01 X-143.74344 Y24.73831
G01 X-143.60230 Y24.65640
G01 X-143.54446 Y24.61891
G01 X-143.51893 Y24.60052
G01 X-143.31411 Y24.43486
G01 X-143.24197 Y24.36943
G01 X-143.19333 Y24.32079
G01 X-143.12792 Y24.24863
G01 X-142.96222 Y24.04380
G01 X-142.94385 Y24.01833
G01 X-142.90636 Y23.96047
G01 X-142.82442 Y23.81932
G01 X-142.72074 Y23.61513
G01 X-142.70588 Y23.58396
G01 X-142.69435 Y23.55137
G01 X-142.68637 Y23.52696
G01 X-142.62328 Y23.33367
G01 X-142.58139 Y23.17594
G01 X-142.56699 Y23.10852
G01 X-142.55808 Y23.05369
G01 X-142.53471 Y22.95468
G01 X-142.52269 Y22.91025
G01 X-142.44766 Y22.72630
G01 X-142.43661 Y22.70616
G01 X-142.40189 Y22.63685
G01 X-142.39773 Y22.62770
G01 X-142.39326 Y22.61856
G01 X-142.39323 Y22.61853
G01 X-142.32732 Y22.57992
G01 X-142.28251 Y22.56331
G01 X-142.29099 Y22.56197
G01 X-142.37182 Y22.53426
G01 X-142.40209 Y22.51752
G01 X-142.40306 Y22.51604
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-141.84489 Y22.56702 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-141.84489 Y22.56702
G01 X-141.84543 Y22.56634
G01 X-141.84858 Y22.53433
G01 X-141.84858 Y22.51536
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-144.09533 Y20.35013 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-144.09533 Y20.35013
G01 X-144.12404 Y20.31691
G01 X-144.13498 Y20.27388
G01 X-144.14133 Y20.18872
G01 X-144.13282 Y20.10373
G01 X-144.12190 Y20.04617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-144.09533 Y15.35014 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-144.09533 Y15.35014
G01 X-144.03290 Y15.41001
G01 X-143.99480 Y15.44461
G01 X-143.93277 Y15.49785
G01 X-143.86732 Y15.54816
G01 X-143.83920 Y15.56742
G01 X-143.75289 Y15.62386
G01 X-143.60230 Y15.71126
G01 X-143.54443 Y15.74877
G01 X-143.51896 Y15.76711
G01 X-143.31416 Y15.93282
G01 X-143.24197 Y15.99825
G01 X-143.19333 Y16.04689
G01 X-143.12792 Y16.11903
G01 X-142.97281 Y16.31077
G01 X-142.96219 Y16.32390
G01 X-142.94385 Y16.34936
G01 X-142.90634 Y16.40722
G01 X-142.82442 Y16.54834
G01 X-142.72074 Y16.75255
G01 X-142.70588 Y16.78372
G01 X-142.70242 Y16.79294
G01 X-142.69435 Y16.81631
G01 X-142.62328 Y17.03399
G01 X-142.58139 Y17.19175
G01 X-142.56699 Y17.25916
G01 X-142.56196 Y17.29015
G01 X-142.53430 Y17.55210
G01 X-142.52953 Y17.64943
G01 X-142.52953 Y17.71824
G01 X-142.53430 Y17.81552
G01 X-142.54578 Y17.92441
G01 X-142.56196 Y18.07749
G01 X-142.56702 Y18.10853
G01 X-142.58139 Y18.17595
G01 X-142.62328 Y18.33368
G01 X-142.66140 Y18.45052
G01 X-142.69435 Y18.55138
G01 X-142.70585 Y18.58392
G01 X-142.72074 Y18.61514
G01 X-142.82442 Y18.81930
G01 X-142.90636 Y18.96048
G01 X-142.94385 Y19.01831
G01 X-142.96222 Y19.04381
G01 X-143.12792 Y19.24864
G01 X-143.19333 Y19.32080
G01 X-143.24197 Y19.36944
G01 X-143.31411 Y19.43482
G01 X-143.51893 Y19.60056
G01 X-143.54446 Y19.61892
G01 X-143.60230 Y19.65641
G01 X-143.75340 Y19.74412
G01 X-143.76597 Y19.75128
G01 X-143.86714 Y19.81938
G01 X-143.92838 Y19.86845
G01 X-143.93196 Y19.87134
G01 X-143.99498 Y19.92245
G01 X-144.10743 Y20.03007
G01 X-144.12190 Y20.04617
G01 X-144.34652 Y20.11430
G01 X-144.44072 Y20.13304
G01 X-144.83092 Y20.17147
G01 X-144.87895 Y20.17383
G01 X-152.37893 Y20.17383
G01 X-152.42694 Y20.17147
G01 X-152.81714 Y20.13304
G01 X-152.91134 Y20.11430
G01 X-152.95249 Y20.10182
G01 X-158.63843 Y20.10182
G01 X-158.68644 Y20.09946
G01 X-159.07656 Y20.06106
G01 X-159.17074 Y20.04231
G01 X-159.43269 Y19.96289
G01 X-159.47643 Y19.91595
G01 X-159.52677 Y19.86560
G01 X-159.58944 Y19.80734
G01 X-159.64514 Y19.76007
G01 X-159.70709 Y19.71232
G01 X-159.78568 Y19.65951
G01 X-159.91481 Y19.58455
G01 X-159.97265 Y19.54706
G01 X-159.99840 Y19.52852
G01 X-160.20323 Y19.36284
G01 X-160.27511 Y19.29771
G01 X-160.30003 Y19.27396
G01 X-160.38354 Y19.19047
G01 X-160.40729 Y19.16553
G01 X-160.47292 Y19.09311
G01 X-160.63866 Y18.88829
G01 X-160.65679 Y18.86312
G01 X-160.69429 Y18.80528
G01 X-160.77643 Y18.66380
G01 X-160.87993 Y18.45994
G01 X-160.89497 Y18.42842
G01 X-160.90638 Y18.39621
G01 X-160.97757 Y18.17818
G01 X-161.00937 Y18.05847
G01 X-161.01935 Y18.02080
G01 X-161.03376 Y17.95339
G01 X-161.03886 Y17.92200
G01 X-161.04547 Y17.85954
G01 X-161.04587 Y17.85573
G01 X-161.06655 Y17.66000
G01 X-161.07132 Y17.56309
G01 X-161.07216 Y17.52847
G01 X-161.07132 Y17.49390
G01 X-161.06655 Y17.39665
G01 X-161.03889 Y17.13467
G01 X-161.03391 Y17.10401
G01 X-161.01953 Y17.03663
G01 X-160.97757 Y16.87846
G01 X-160.90665 Y16.66117
G01 X-160.89497 Y16.62822
G01 X-160.88026 Y16.59736
G01 X-160.77643 Y16.39284
G01 X-160.69467 Y16.25200
G01 X-160.65720 Y16.19419
G01 X-160.63863 Y16.16838
G01 X-160.47295 Y15.96353
G01 X-160.40780 Y15.89167
G01 X-160.35913 Y15.84298
G01 X-160.28669 Y15.77732
G01 X-160.08189 Y15.61161
G01 X-160.05669 Y15.59345
G01 X-159.99886 Y15.55596
G01 X-159.85741 Y15.47384
G01 X-159.84819 Y15.46917
G01 X-159.84214 Y15.46607
G01 X-159.83726 Y15.46350
G01 X-159.75154 Y15.41100
G01 X-159.68824 Y15.36587
G01 X-159.66510 Y15.34867
G01 X-159.60292 Y15.30067
G01 X-159.51603 Y15.22414
G01 X-159.45410 Y15.16249
G01 X-159.44936 Y15.15703
G01 X-159.25472 Y15.09795
G01 X-159.16051 Y15.07918
G01 X-158.79889 Y15.04354
G01 X-158.77006 Y15.04354
G01 X-158.67499 Y15.04819
G01 X-158.64674 Y15.05098
G01 X-158.59945 Y15.05446
G01 X-158.46991 Y15.06081
G01 X-153.08762 Y15.06081
G01 X-152.91134 Y15.11428
G01 X-152.87335 Y15.12185
G01 X-152.81658 Y15.12746
G01 X-152.45092 Y15.14542
G01 X-152.42455 Y15.14710
G01 X-152.40530 Y15.14857
G01 X-152.37893 Y15.15025
G01 X-152.01325 Y15.16820
G01 X-151.95628 Y15.17384
G01 X-151.91851 Y15.18136
G01 X-151.87736 Y15.19383
G01 X-144.87895 Y15.19383
G01 X-144.83092 Y15.19620
G01 X-144.44072 Y15.23463
G01 X-144.34652 Y15.25337
G01 X-144.11944 Y15.32226
G01 X-144.09533 Y15.35014
G01 X-144.12404 Y15.31692
G01 X-144.13498 Y15.27389
G01 X-144.14133 Y15.18875
G01 X-144.13282 Y15.10379
G01 X-144.12190 Y15.04616
G01 X-144.10745 Y15.03008
G01 X-143.99498 Y14.92243
G01 X-143.93196 Y14.87133
G01 X-143.92830 Y14.86838
G01 X-143.86706 Y14.81934
G01 X-143.76643 Y14.75154
G01 X-143.75289 Y14.74382
G01 X-143.60230 Y14.65639
G01 X-143.54443 Y14.61890
G01 X-143.51896 Y14.60054
G01 X-143.31413 Y14.43483
G01 X-143.24197 Y14.36943
G01 X-143.19333 Y14.32078
G01 X-143.12792 Y14.24862
G01 X-142.96222 Y14.04380
G01 X-142.94385 Y14.01832
G01 X-142.90636 Y13.96046
G01 X-142.82442 Y13.81931
G01 X-142.72074 Y13.61512
G01 X-142.70588 Y13.58396
G01 X-142.69435 Y13.55137
G01 X-142.62328 Y13.33366
G01 X-142.58139 Y13.17593
G01 X-142.56702 Y13.10852
G01 X-142.56196 Y13.07751
G01 X-142.53430 Y12.81550
G01 X-142.52953 Y12.71822
G01 X-142.52953 Y12.64941
G01 X-142.53430 Y12.55216
G01 X-142.56196 Y12.29016
G01 X-142.56702 Y12.25914
G01 X-142.58139 Y12.19173
G01 X-142.62328 Y12.03397
G01 X-142.69435 Y11.81629
G01 X-142.70585 Y11.78373
G01 X-142.72074 Y11.75254
G01 X-142.82442 Y11.54835
G01 X-142.90636 Y11.40720
G01 X-142.94385 Y11.34934
G01 X-142.96222 Y11.32386
G01 X-143.12792 Y11.11904
G01 X-143.19333 Y11.04688
G01 X-143.24197 Y10.99824
G01 X-143.31416 Y10.93283
G01 X-143.46701 Y10.80911
G01 X-143.51893 Y10.76712
G01 X-143.54443 Y10.74876
G01 X-143.60230 Y10.71127
G01 X-143.62571 Y10.69768
G01 X-143.74344 Y10.62933
G01 X-143.94763 Y10.52564
G01 X-143.97882 Y10.51078
G01 X-144.01139 Y10.49925
G01 X-144.22914 Y10.42816
G01 X-144.24118 Y10.42496
G01 X-144.38682 Y10.38630
G01 X-144.45424 Y10.37190
G01 X-144.48525 Y10.36684
G01 X-144.74725 Y10.33918
G01 X-144.84453 Y10.33441
G01 X-144.87895 Y10.33357
G01 X-151.68483 Y10.33357
G01 X-151.74391 Y10.33108
G01 X-151.79382 Y10.32686
G01 X-151.80281 Y10.32605
G01 X-151.84010 Y10.31569
G01 X-151.99981 Y10.27329
G01 X-152.04299 Y10.26329
G01 X-152.06723 Y10.25892
G01 X-152.09824 Y10.25386
G01 X-152.36024 Y10.22620
G01 X-152.45752 Y10.22143
G01 X-152.49194 Y10.22056
G01 X-157.88771 Y10.22056
G01 X-157.94695 Y10.21807
G01 X-157.99686 Y10.21386
G01 X-158.00166 Y10.21343
G01 X-158.05423 Y10.19849
G01 X-158.07039 Y10.19323
G01 X-158.07095 Y10.19306
G01 X-158.07217 Y10.19265
G01 X-158.19937 Y10.15889
G01 X-158.23008 Y10.15074
G01 X-158.29747 Y10.13636
G01 X-158.32822 Y10.13136
G01 X-158.59025 Y10.10372
G01 X-158.68776 Y10.09892
G01 X-158.75660 Y10.09892
G01 X-158.85360 Y10.10370
G01 X-159.11560 Y10.13138
G01 X-159.14687 Y10.13646
G01 X-159.21425 Y10.15087
G01 X-159.37178 Y10.19267
G01 X-159.58969 Y10.26385
G01 X-159.62202 Y10.27528
G01 X-159.65344 Y10.29026
G01 X-159.85738 Y10.39384
G01 X-159.99878 Y10.47591
G01 X-160.05662 Y10.51340
G01 X-160.08189 Y10.53161
G01 X-160.28672 Y10.69732
G01 X-160.35906 Y10.76290
G01 X-160.40772 Y10.81157
G01 X-160.47292 Y10.88355
G01 X-160.63863 Y11.08835
G01 X-160.65715 Y11.11409
G01 X-160.69462 Y11.17192
G01 X-160.77640 Y11.31284
G01 X-160.88019 Y11.51726
G01 X-160.89497 Y11.54822
G01 X-160.90660 Y11.58104
G01 X-160.97757 Y11.79846
G01 X-161.01951 Y11.95650
G01 X-161.03388 Y12.02389
G01 X-161.03889 Y12.05467
G01 X-161.05405 Y12.19826
G01 X-161.06655 Y12.31665
G01 X-161.07132 Y12.41390
G01 X-161.07216 Y12.44845
G01 X-161.07132 Y12.48302
G01 X-161.06655 Y12.58000
G01 X-161.05403 Y12.69871
G01 X-161.05370 Y12.70179
G01 X-161.04587 Y12.77573
G01 X-161.04544 Y12.77972
G01 X-161.03886 Y12.84200
G01 X-161.03378 Y12.87324
G01 X-161.01941 Y12.94068
G01 X-160.97757 Y13.09818
G01 X-160.90643 Y13.31611
G01 X-160.89500 Y13.34845
G01 X-160.87998 Y13.37987
G01 X-160.77643 Y13.58380
G01 X-160.69434 Y13.72520
G01 X-160.65685 Y13.78304
G01 X-160.63866 Y13.80829
G01 X-160.47292 Y14.01311
G01 X-160.40734 Y14.08548
G01 X-160.38362 Y14.11040
G01 X-160.26111 Y14.23287
G01 X-160.23620 Y14.25660
G01 X-160.16424 Y14.32183
G01 X-159.95939 Y14.48754
G01 X-159.93373 Y14.50600
G01 X-159.87590 Y14.54349
G01 X-159.79988 Y14.58761
G01 X-159.72177 Y14.64011
G01 X-159.65982 Y14.68787
G01 X-159.55842 Y14.78116
G01 X-159.50000 Y14.84466
G01 X-159.49543 Y14.84961
G01 X-159.44161 Y14.90732
G01 X-159.13178 Y15.00130
G01 X-159.03760 Y15.02005
G01 X-158.79889 Y15.04354
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.44161 Y14.90732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.44161 Y14.90732
G01 X-159.44095 Y14.91027
G01 X-159.42929 Y14.99485
G01 X-159.43249 Y15.08017
G01 X-159.44892 Y15.15649
G01 X-159.45410 Y15.16249
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-159.43269 Y19.96289 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-159.43269 Y19.96289
G01 X-159.42789 Y19.98397
G01 X-159.41623 Y20.06855
G01 X-159.41943 Y20.15387
G01 X-159.43643 Y20.23284
G01 X-159.43673 Y20.23319
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-158.59945 Y15.05446 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-158.59945 Y15.05446
G01 X-158.46932 Y15.06084
G01 X-158.28410 Y15.07905
G01 X-158.18990 Y15.09777
G01 X-158.11060 Y15.12182
G01 X-152.87335 Y15.12185
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-151.95628 Y15.17384 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-151.95628 Y15.17384
G01 X-144.87895 Y15.17382
G01 X-144.83092 Y15.17146
G01 X-144.44072 Y15.13303
G01 X-144.34652 Y15.11428
G01 X-144.12190 Y15.04616
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-136.39497 Y11.46463 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-136.39497 Y11.46463
G01 X-136.39304 Y11.46450
G01 X-136.38316 Y11.45757
G01 X-136.32273 Y11.39714
G01 X-136.27373 Y11.32714
G01 X-136.23518 Y11.26034
G01 X-136.19908 Y11.18294
G01 X-136.18039 Y11.11317
G01 X-136.18791 Y11.08394
G01 X-136.18793 Y11.08394
G01 X-136.20556 Y11.01538
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-136.96136 Y9.79712 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-136.96136 Y9.79712
G01 X-136.93817 Y9.75633
G01 X-136.90833 Y9.70654
G01 X-136.86881 Y9.63281
G01 X-136.79929 Y9.48579
G01 X-136.77681 Y9.43169
G01 X-136.72420 Y9.28468
G01 X-136.71194 Y9.24431
G01 X-136.67511 Y9.09730
G01 X-136.66883 Y9.06588
G01 X-136.64701 Y8.91884
G01 X-136.64445 Y8.89263
G01 X-136.63721 Y8.74561
G01 X-136.63693 Y8.73332
G01 X-136.63693 Y7.23332
G01 X-136.63721 Y7.22105
G01 X-136.64445 Y7.07401
G01 X-136.64704 Y7.04777
G01 X-136.66883 Y6.90076
G01 X-136.67508 Y6.86939
G01 X-136.71194 Y6.72235
G01 X-136.72420 Y6.68196
G01 X-136.73980 Y6.63840
G01 X-136.80937 Y6.56164
G01 X-136.84021 Y6.53078
G01 X-136.94927 Y6.43193
G01 X-136.98471 Y6.40287
G01 X-137.10409 Y6.31432
G01 X-137.14749 Y6.28534
G01 X-137.23431 Y6.23332
G01 X-138.16832 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-135.71453 Y4.65603 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-135.71453 Y4.65603
G01 X-135.49362 Y4.74570
G01 X-135.48473 Y4.74412
G01 X-135.41024 Y4.72418
G01 X-135.32990 Y4.69495
G01 X-135.26254 Y4.65606
G01 X-135.21585 Y4.57176
G01 X-135.18392 Y4.49462
G01 X-135.12840 Y4.29114
G01 X-135.11824 Y4.21402
G01 X-135.11217 Y4.12180
G01 X-135.11217 Y3.73333
G01 X-135.11133 Y3.69891
G01 X-135.10876 Y3.64699
G01 X-135.09667 Y3.55263
G01 X-135.08456 Y3.48479
G01 X-135.08260 Y3.47628
G01 X-135.04115 Y3.34433
G01 X-135.02997 Y3.31161
G01 X-135.01478 Y3.28065
G01 X-134.95078 Y3.15799
G01 X-134.94613 Y3.15060
G01 X-134.90676 Y3.09409
G01 X-134.84857 Y3.01877
G01 X-134.81367 Y2.98027
G01 X-134.76497 Y2.93158
G01 X-134.72647 Y2.89670
G01 X-134.65113 Y2.83849
G01 X-134.59462 Y2.79912
G01 X-134.58725 Y2.79449
G01 X-134.46462 Y2.73048
G01 X-134.43361 Y2.71527
G01 X-134.40099 Y2.70412
G01 X-134.26896 Y2.66264
G01 X-134.26051 Y2.66071
G01 X-134.19261 Y2.64857
G01 X-134.09825 Y2.63648
G01 X-134.04633 Y2.63391
G01 X-133.97755 Y2.63391
G01 X-133.92558 Y2.63648
G01 X-133.83125 Y2.64857
G01 X-133.76333 Y2.66071
G01 X-133.75487 Y2.66264
G01 X-133.62284 Y2.70412
G01 X-133.59025 Y2.71524
G01 X-133.55926 Y2.73046
G01 X-133.43661 Y2.79449
G01 X-133.42924 Y2.79909
G01 X-133.37267 Y2.83854
G01 X-133.29736 Y2.89668
G01 X-133.25886 Y2.93160
G01 X-133.21019 Y2.98027
G01 X-133.17529 Y3.01877
G01 X-133.11710 Y3.09409
G01 X-133.07773 Y3.15060
G01 X-133.07308 Y3.15802
G01 X-133.00907 Y3.28062
G01 X-132.99386 Y3.31161
G01 X-132.98271 Y3.34433
G01 X-132.94125 Y3.47625
G01 X-132.93930 Y3.48479
G01 X-132.92718 Y3.55258
G01 X-132.91507 Y3.64699
G01 X-132.91253 Y3.69886
G01 X-132.91169 Y3.73333
G01 X-132.91169 Y3.82081
G01 X-132.91017 Y3.86673
G01 X-132.90763 Y3.90564
G01 X-132.89106 Y4.01905
G01 X-132.87369 Y4.04262
G01 X-132.82632 Y4.10435
G01 X-132.76544 Y4.17381
G01 X-132.46445 Y4.47480
G01 X-132.43102 Y4.50612
G01 X-132.40171 Y4.53183
G01 X-132.28370 Y4.61613
G01 X-132.21454 Y4.65603
G01 X-131.99752 Y4.74410
G01 X-131.99747 Y4.74412
G01 X-131.99363 Y4.74570
G01 X-131.98474 Y4.74412
G01 X-131.91024 Y4.72418
G01 X-131.82990 Y4.69495
G01 X-131.76254 Y4.65606
G01 X-131.71586 Y4.57176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-131.75190 Y4.98971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-131.75190 Y4.98971
G01 X-131.99747 Y4.74412
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-135.25194 Y4.63693 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-135.25194 Y4.63693
G01 X-135.25189 Y4.98971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-134.59942 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-134.59942 Y6.23332
G01 X-134.61575 Y6.20708
G01 X-134.62347 Y6.19510
G01 X-134.65802 Y6.13652
G01 X-134.70155 Y6.05507
G01 X-134.73521 Y5.99880
G01 X-134.76609 Y5.94734
G01 X-134.80884 Y5.86738
G01 X-134.83609 Y5.82187
G01 X-134.83924 Y5.81717
G01 X-134.86569 Y5.77305
G01 X-134.90810 Y5.69367
G01 X-134.93457 Y5.64953
G01 X-134.93772 Y5.64483
G01 X-134.96503 Y5.59924
G01 X-135.00772 Y5.51933
G01 X-135.02225 Y5.49370
G01 X-135.03782 Y5.46769
G01 X-135.06797 Y5.41118
G01 X-135.13475 Y5.27003
G01 X-135.15100 Y5.23335
G01 X-135.25189 Y4.98971
G01 X-135.49751 Y4.74412
G01 X-135.71453 Y4.65603
G01 X-135.78369 Y4.61613
G01 X-135.90170 Y4.53185
G01 X-135.93101 Y4.50612
G01 X-135.96444 Y4.47483
G01 X-136.26545 Y4.17381
G01 X-136.32639 Y4.10427
G01 X-136.37376 Y4.04255
G01 X-136.39108 Y4.01905
G01 X-136.40762 Y3.90564
G01 X-136.41018 Y3.86673
G01 X-136.41168 Y3.82081
G01 X-136.41168 Y3.73333
G01 X-136.41252 Y3.69891
G01 X-136.41509 Y3.64699
G01 X-136.42718 Y3.55263
G01 X-136.43929 Y3.48479
G01 X-136.44125 Y3.47628
G01 X-136.48270 Y3.34433
G01 X-136.49388 Y3.31161
G01 X-136.50907 Y3.28065
G01 X-136.57307 Y3.15799
G01 X-136.57772 Y3.15060
G01 X-136.61709 Y3.09409
G01 X-136.67528 Y3.01877
G01 X-136.71018 Y2.98027
G01 X-136.75885 Y2.93160
G01 X-136.79736 Y2.89668
G01 X-136.87267 Y2.83854
G01 X-136.92923 Y2.79909
G01 X-136.93660 Y2.79449
G01 X-137.05926 Y2.73046
G01 X-137.09024 Y2.71527
G01 X-137.12286 Y2.70412
G01 X-137.25489 Y2.66264
G01 X-137.26334 Y2.66071
G01 X-137.33124 Y2.64857
G01 X-137.42560 Y2.63648
G01 X-137.47752 Y2.63391
G01 X-137.54630 Y2.63391
G01 X-137.59824 Y2.63648
G01 X-137.69260 Y2.64857
G01 X-137.76052 Y2.66071
G01 X-137.76898 Y2.66264
G01 X-137.90101 Y2.70412
G01 X-137.93360 Y2.71524
G01 X-137.96459 Y2.73046
G01 X-138.08724 Y2.79449
G01 X-138.09461 Y2.79909
G01 X-138.15118 Y2.83854
G01 X-138.22649 Y2.89668
G01 X-138.26499 Y2.93160
G01 X-138.31366 Y2.98027
G01 X-138.34856 Y3.01877
G01 X-138.40675 Y3.09409
G01 X-138.44612 Y3.15060
G01 X-138.45077 Y3.15802
G01 X-138.51478 Y3.28062
G01 X-138.52999 Y3.31161
G01 X-138.54114 Y3.34433
G01 X-138.58259 Y3.47625
G01 X-138.58455 Y3.48479
G01 X-138.59667 Y3.55258
G01 X-138.60878 Y3.64699
G01 X-138.61132 Y3.69886
G01 X-138.61216 Y3.73333
G01 X-138.61216 Y5.23335
G01 X-138.61132 Y5.26779
G01 X-138.60878 Y5.31966
G01 X-138.59667 Y5.41407
G01 X-138.58455 Y5.48186
G01 X-138.58259 Y5.49040
G01 X-138.54114 Y5.62233
G01 X-138.52999 Y5.65504
G01 X-138.51478 Y5.68603
G01 X-138.45077 Y5.80863
G01 X-138.44612 Y5.81605
G01 X-138.40675 Y5.87257
G01 X-138.35613 Y5.93807
G01 X-138.31907 Y5.99083
G01 X-138.30319 Y6.01572
G01 X-138.27873 Y6.05179
G01 X-138.25775 Y6.08087
G01 X-138.19535 Y6.18194
G01 X-138.16832 Y6.23332
G01 X-138.19677 Y6.28308
G01 X-138.19715 Y6.28379
G01 X-138.23820 Y6.35539
G01 X-138.27716 Y6.41689
G01 X-138.31645 Y6.47300
G01 X-138.31866 Y6.47615
G01 X-138.33423 Y6.49865
G01 X-138.35610 Y6.52857
G01 X-138.40673 Y6.59405
G01 X-138.44612 Y6.65059
G01 X-138.45077 Y6.65801
G01 X-138.51478 Y6.78062
G01 X-138.52999 Y6.81160
G01 X-138.54114 Y6.84432
G01 X-138.58259 Y6.97625
G01 X-138.58455 Y6.98478
G01 X-138.59667 Y7.05257
G01 X-138.60878 Y7.14699
G01 X-138.61132 Y7.19888
G01 X-138.61216 Y7.23332
G01 X-138.61216 Y8.73332
G01 X-138.61132 Y8.76779
G01 X-138.60878 Y8.81965
G01 X-138.59667 Y8.91406
G01 X-138.58455 Y8.98183
G01 X-138.58259 Y8.99039
G01 X-138.54114 Y9.12234
G01 X-138.52999 Y9.15503
G01 X-138.51475 Y9.18605
G01 X-138.45077 Y9.30863
G01 X-138.44612 Y9.31607
G01 X-138.40675 Y9.37256
G01 X-138.34856 Y9.44787
G01 X-138.31366 Y9.48638
G01 X-138.26499 Y9.53504
G01 X-138.22649 Y9.56997
G01 X-138.15118 Y9.62811
G01 X-138.09464 Y9.66753
G01 X-138.08724 Y9.67215
G01 X-137.96461 Y9.73616
G01 X-137.93360 Y9.75140
G01 X-137.90094 Y9.76255
G01 X-137.76898 Y9.80400
G01 X-137.76047 Y9.80596
G01 X-137.69260 Y9.81808
G01 X-137.59827 Y9.83017
G01 X-137.54630 Y9.83273
G01 X-137.47752 Y9.83273
G01 X-137.42555 Y9.83017
G01 X-137.40650 Y9.82773
G01 X-137.34102 Y9.81932
G01 X-137.33124 Y9.81815
G01 X-137.26210 Y9.81025
G01 X-137.24856 Y9.80883
G01 X-137.17023 Y9.80139
G01 X-137.11216 Y9.79803
G01 X-137.02710 Y9.79628
G01 X-136.96136 Y9.79712
G01 X-136.95943 Y9.80037
G01 X-136.94970 Y9.81693
G01 X-136.90769 Y9.89029
G01 X-136.88112 Y9.94040
G01 X-136.84770 Y10.00893
G01 X-136.83020 Y10.04756
G01 X-136.80914 Y10.09793
G01 X-136.79123 Y10.14543
G01 X-136.78681 Y10.15861
G01 X-136.77998 Y10.17802
G01 X-136.76477 Y10.20898
G01 X-136.70076 Y10.33164
G01 X-136.69614 Y10.33900
G01 X-136.65674 Y10.39557
G01 X-136.63736 Y10.42061
G01 X-136.59852 Y10.47091
G01 X-136.56365 Y10.50939
G01 X-136.53990 Y10.53433
G01 X-136.45044 Y10.62381
G01 X-136.38953 Y10.69331
G01 X-136.34219 Y10.75501
G01 X-136.23751 Y10.93827
G01 X-136.20556 Y11.01538
G01 X-136.18791 Y11.08394
G01 X-132.59376 Y14.67814
G01 X-132.55812 Y14.71042
G01 X-132.44448 Y14.80369
G01 X-132.36460 Y14.85705
G01 X-132.26691 Y14.90928
G01 X-132.26691 Y18.44135
G01 X-132.28047 Y18.48600
G01 X-132.29919 Y18.58021
G01 X-132.31459 Y18.73629
G01 X-132.31695 Y18.78430
G01 X-132.31695 Y19.58432
G01 X-132.31459 Y19.63233
G01 X-132.29919 Y19.78841
G01 X-132.28047 Y19.88262
G01 X-132.23493 Y20.03271
G01 X-132.19818 Y20.12143
G01 X-132.19119 Y20.13451
G01 X-132.12426 Y20.25976
G01 X-132.07090 Y20.33962
G01 X-131.97141 Y20.46085
G01 X-131.90349 Y20.52877
G01 X-131.78225 Y20.62826
G01 X-131.70237 Y20.68163
G01 X-131.56407 Y20.75557
G01 X-131.54997 Y20.76139
G01 X-131.47532 Y20.79232
G01 X-131.32526 Y20.83784
G01 X-131.23105 Y20.85659
G01 X-131.07496 Y20.87195
G01 X-130.97890 Y20.87195
G01 X-130.82284 Y20.85659
G01 X-130.72864 Y20.83784
G01 X-130.57855 Y20.79232
G01 X-130.48980 Y20.75557
G01 X-130.35150 Y20.68163
G01 X-130.27164 Y20.62826
G01 X-130.15040 Y20.52877
G01 X-130.08248 Y20.46085
G01 X-130.00192 Y20.36268
G01 X-129.98299 Y20.33962
G01 X-129.92963 Y20.25976
G01 X-129.85569 Y20.12143
G01 X-129.81893 Y20.03271
G01 X-129.77342 Y19.88262
G01 X-129.75693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-129.75693 Y18.56873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-129.75693 Y18.56873
G01 X-129.77342 Y18.48600
G01 X-129.78693 Y18.44145
G01 X-129.78693 Y15.08812
G01 X-129.77931 Y15.08187
G01 X-129.71139 Y15.01395
G01 X-129.68030 Y14.97605
G01 X-129.62694 Y14.89620
G01 X-129.60692 Y14.85873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.11693 Y14.40397 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.11693 Y14.40397
G01 X-127.12694 Y14.42810
G01 X-127.12692 Y18.26825
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.21691 Y19.58432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.21691 Y19.58432
G01 X-127.21693 Y19.63063
G01 X-127.21691 Y19.78819
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.21691 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.21691 Y19.79974
G01 X-127.23342 Y19.88262
G01 X-127.27893 Y20.03271
G01 X-127.31569 Y20.12143
G01 X-127.38963 Y20.25976
G01 X-127.44299 Y20.33962
G01 X-127.46192 Y20.36268
G01 X-127.54248 Y20.46085
G01 X-127.61040 Y20.52877
G01 X-127.73164 Y20.62826
G01 X-127.81150 Y20.68163
G01 X-127.94980 Y20.75557
G01 X-128.03855 Y20.79232
G01 X-128.18864 Y20.83784
G01 X-128.28284 Y20.85659
G01 X-128.43890 Y20.87195
G01 X-128.53496 Y20.87195
G01 X-128.69105 Y20.85659
G01 X-128.78526 Y20.83784
G01 X-128.93532 Y20.79232
G01 X-129.01198 Y20.76057
G01 X-129.02407 Y20.75557
G01 X-129.16237 Y20.68163
G01 X-129.24225 Y20.62826
G01 X-129.36349 Y20.52877
G01 X-129.43141 Y20.46085
G01 X-129.53090 Y20.33962
G01 X-129.58426 Y20.25976
G01 X-129.65818 Y20.12143
G01 X-129.69493 Y20.03271
G01 X-129.74047 Y19.88262
G01 X-129.75693 Y19.79974
G01 X-129.75693 Y18.56873
G01 X-129.74047 Y18.48600
G01 X-129.69493 Y18.33591
G01 X-129.65818 Y18.24719
G01 X-129.60692 Y18.15131
G01 X-129.60692 Y14.85873
G01 X-129.60524 Y14.85203
G01 X-129.58655 Y14.75832
G01 X-129.57929 Y14.70933
G01 X-129.57042 Y14.61977
G01 X-129.56801 Y14.57075
G01 X-129.56692 Y14.52632
G01 X-129.56692 Y14.42632
G01 X-129.57507 Y14.37984
G01 X-129.59978 Y14.21322
G01 X-129.60776 Y14.13227
G01 X-129.61594 Y13.96564
G01 X-129.61693 Y13.92635
G01 X-129.61693 Y13.67634
G01 X-129.61594 Y13.63702
G01 X-129.61345 Y13.58632
G01 X-129.82470 Y13.07634
G01 X-129.83278 Y13.05810
G01 X-129.85505 Y13.01106
G01 X-129.87067 Y12.98175
G01 X-129.89666 Y12.93841
G01 X-129.91251 Y12.91467
G01 X-129.94200 Y12.87489
G01 X-129.95841 Y12.85487
G01 X-129.99137 Y12.81850
G01 X-130.00910 Y12.80077
G01 X-130.04548 Y12.76780
G01 X-130.06549 Y12.75139
G01 X-130.10527 Y12.72191
G01 X-130.12902 Y12.70606
G01 X-130.17235 Y12.68007
G01 X-130.20174 Y12.66440
G01 X-130.24880 Y12.64215
G01 X-130.26694 Y12.63412
G01 X-130.38347 Y12.58584
G01 X-130.62394 Y12.58584
G01 X-130.64753 Y12.58525
G01 X-130.79455 Y12.57804
G01 X-130.84375 Y12.57319
G01 X-130.99076 Y12.55137
G01 X-131.04568 Y12.54042
G01 X-131.19269 Y12.50359
G01 X-131.25790 Y12.48378
G01 X-131.40491 Y12.43118
G01 X-131.44448 Y12.41591
G01 X-131.45878 Y12.40997
G01 X-133.08667 Y10.78208
G01 X-133.11489 Y10.75244
G01 X-133.21375 Y10.64335
G01 X-133.26731 Y10.57804
G01 X-133.35586 Y10.45866
G01 X-133.40724 Y10.38165
G01 X-133.44362 Y10.32100
G01 X-133.80963 Y9.95498
G01 X-133.81801 Y9.95244
G01 X-133.97115 Y9.89765
G01 X-134.04953 Y9.86527
G01 X-134.19068 Y9.79852
G01 X-134.24877 Y9.76750
G01 X-134.37882 Y9.68958
G01 X-134.42373 Y9.65960
G01 X-134.54308 Y9.57106
G01 X-134.57968 Y9.54106
G01 X-134.68875 Y9.44221
G01 X-134.72080 Y9.41015
G01 X-134.77684 Y9.34830
G01 X-134.79962 Y9.28465
G01 X-134.81189 Y9.24429
G01 X-134.84874 Y9.09727
G01 X-134.85499 Y9.06588
G01 X-134.87681 Y8.91884
G01 X-134.87938 Y8.89263
G01 X-134.88662 Y8.74561
G01 X-134.88692 Y8.73332
G01 X-134.88692 Y7.23332
G01 X-134.88662 Y7.22105
G01 X-134.87938 Y7.07404
G01 X-134.87681 Y7.04780
G01 X-134.85499 Y6.90078
G01 X-134.84874 Y6.86939
G01 X-134.81191 Y6.72235
G01 X-134.79962 Y6.68196
G01 X-134.74702 Y6.53495
G01 X-134.72456 Y6.48090
G01 X-134.65502 Y6.33386
G01 X-134.61547 Y6.26007
G01 X-134.59942 Y6.23332
G01 X-133.73432 Y6.23332
G01 X-133.64750 Y6.28537
G01 X-133.60409 Y6.31432
G01 X-133.48471 Y6.40287
G01 X-133.44928 Y6.43193
G01 X-133.34021 Y6.53078
G01 X-133.30938 Y6.56164
G01 X-133.23981 Y6.63840
G01 X-133.22421 Y6.68196
G01 X-133.21194 Y6.72235
G01 X-133.17509 Y6.86939
G01 X-133.16884 Y6.90076
G01 X-133.14705 Y7.04777
G01 X-133.14445 Y7.07401
G01 X-133.13722 Y7.22103
G01 X-133.13691 Y7.23332
G01 X-133.13691 Y8.73332
G01 X-133.13722 Y8.74564
G01 X-133.14445 Y8.89265
G01 X-133.14702 Y8.91884
G01 X-133.16884 Y9.06588
G01 X-133.17511 Y9.09730
G01 X-133.21194 Y9.24431
G01 X-133.22421 Y9.28468
G01 X-133.27681 Y9.43169
G01 X-133.29929 Y9.48579
G01 X-133.36881 Y9.63281
G01 X-133.40834 Y9.70654
G01 X-133.49647 Y9.85358
G01 X-133.50188 Y9.86166
G01 X-133.58268 Y9.89511
G01 X-133.72337 Y9.93781
G01 X-133.80963 Y9.95498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-133.50188 Y9.86166 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-133.50188 Y9.86166
G01 X-133.50191 Y9.95732
G01 X-133.49957 Y10.00535
G01 X-133.48514 Y10.15168
G01 X-133.46640 Y10.24589
G01 X-133.44362 Y10.32100
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.00189 Y9.86166 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.00189 Y9.86166
G01 X-130.00192 Y10.15531
G01 X-129.99958 Y10.20334
G01 X-129.98515 Y10.34967
G01 X-129.98393 Y10.35584
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-130.49465 Y9.97096 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-130.49465 Y9.97096
G01 X-130.11030 Y10.35534
G01 X-129.98452 Y10.35534
G01 X-129.98393 Y10.35584
G01 X-129.97321 Y10.36537
G01 X-129.92973 Y10.40342
G01 X-129.90420 Y10.42508
G01 X-129.79310 Y10.51625
G01 X-129.76826 Y10.53748
G01 X-129.73743 Y10.56496
G01 X-129.71698 Y10.58244
G01 X-129.61459 Y10.66649
G01 X-129.59463 Y10.68376
G01 X-129.57761 Y10.69923
G01 X-129.55957 Y10.71482
G01 X-129.46204 Y10.79488
G01 X-129.44423 Y10.81038
G01 X-129.43280 Y10.82094
G01 X-129.43003 Y10.82346
G01 X-129.32374 Y10.91980
G01 X-129.31038 Y10.93250
G01 X-127.70408 Y12.53880
G01 X-127.69138 Y12.55216
G01 X-127.59252 Y12.66122
G01 X-127.56791 Y12.69122
G01 X-127.47939 Y12.81063
G01 X-127.45445 Y12.84799
G01 X-127.37652 Y12.97799
G01 X-127.35003 Y13.02762
G01 X-127.28328 Y13.16877
G01 X-127.26999 Y13.19859
G01 X-127.23837 Y13.24687
G01 X-127.15005 Y13.39419
G01 X-127.11693 Y13.45497
G01 X-127.11693 Y14.40397
G01 X-127.10693 Y14.42812
G01 X-127.10693 Y18.22614
G01 X-127.11818 Y18.24719
G01 X-127.12692 Y18.26825
G01 X-127.14124 Y18.34013
G01 X-127.16451 Y18.49695
G01 X-127.17317 Y18.58476
G01 X-127.18086 Y18.74158
G01 X-127.18193 Y18.78430
G01 X-127.18193 Y19.06431
G01 X-127.18297 Y19.10703
G01 X-127.19019 Y19.25407
G01 X-127.19885 Y19.34191
G01 X-127.21691 Y19.46360
G01 X-127.21691 Y19.79974
G01 X-127.20047 Y19.88262
G01 X-127.15493 Y20.03271
G01 X-127.11818 Y20.12143
G01 X-127.04426 Y20.25976
G01 X-126.99090 Y20.33962
G01 X-126.89141 Y20.46085
G01 X-126.82349 Y20.52877
G01 X-126.70225 Y20.62826
G01 X-126.62237 Y20.68163
G01 X-126.48407 Y20.75557
G01 X-126.47198 Y20.76057
G01 X-126.39532 Y20.79232
G01 X-126.24526 Y20.83784
G01 X-126.15105 Y20.85659
G01 X-125.99496 Y20.87195
G01 X-125.89890 Y20.87195
G01 X-125.74284 Y20.85659
G01 X-125.64864 Y20.83784
G01 X-125.49855 Y20.79232
G01 X-125.40980 Y20.75557
G01 X-125.27150 Y20.68163
G01 X-125.19164 Y20.62826
G01 X-125.07040 Y20.52877
G01 X-125.00248 Y20.46085
G01 X-124.92192 Y20.36268
G01 X-124.90299 Y20.33962
G01 X-124.84963 Y20.25976
G01 X-124.77569 Y20.12143
G01 X-124.73893 Y20.03271
G01 X-124.69342 Y19.88262
G01 X-124.67693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.62692 Y18.37539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.62692 Y18.37539
G01 X-124.61493 Y18.33591
G01 X-124.60691 Y18.31656
G01 X-124.60691 Y14.42818
G01 X-124.61694 Y14.40394
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.61694 Y13.19864 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.61694 Y13.19864
G01 X-124.60691 Y13.17446
G01 X-124.60691 Y13.01596
G01 X-124.63022 Y12.99264
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.02194 Y9.86169 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.02194 Y9.86169
G01 X-123.94120 Y9.89511
G01 X-123.80051 Y9.93781
G01 X-123.70627 Y9.95653
G01 X-123.55997 Y9.97096
G01 X-123.46391 Y9.97096
G01 X-123.31760 Y9.95653
G01 X-123.22339 Y9.93781
G01 X-123.08268 Y9.89511
G01 X-123.00188 Y9.86166
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-120.52190 Y9.86169 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-120.52190 Y9.86169
G01 X-120.52192 Y10.27903
G01 X-120.52192 Y10.54571
G01 X-119.99010 Y11.07751
G01 X-119.95782 Y11.11315
G01 X-119.86455 Y11.22681
G01 X-119.81118 Y11.30667
G01 X-119.74187 Y11.43633
G01 X-119.70511 Y11.52508
G01 X-119.66244 Y11.66577
G01 X-119.64369 Y11.75998
G01 X-119.62927 Y11.90631
G01 X-119.62693 Y11.95432
G01 X-119.62693 Y13.17456
G01 X-119.61692 Y13.19861
G01 X-119.61692 Y13.38413
G01 X-119.61695 Y13.46948
G01 X-119.61695 Y14.13315
G01 X-119.61692 Y14.21847
G01 X-119.61692 Y14.40394
G01 X-119.62693 Y14.42807
G01 X-119.62693 Y18.44145
G01 X-119.61342 Y18.48600
G01 X-119.60689 Y18.51874
G01 X-119.60077 Y18.58085
G01 X-119.60692 Y18.51844
G01 X-119.60692 Y14.42815
G01 X-119.61692 Y14.40394
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.61692 Y13.19861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.61692 Y13.19861
G01 X-119.58439 Y13.12005
G01 X-119.50582 Y12.97309
G01 X-119.50191 Y12.96724
G01 X-119.50189 Y9.86166
G01 X-119.58268 Y9.89511
G01 X-119.72337 Y9.93781
G01 X-119.81758 Y9.95653
G01 X-119.96391 Y9.97096
G01 X-120.05997 Y9.97096
G01 X-120.20628 Y9.95653
G01 X-120.30049 Y9.93781
G01 X-120.44118 Y9.89511
G01 X-120.52190 Y9.86169
G01 X-120.52736 Y9.85356
G01 X-120.61547 Y9.70652
G01 X-120.65500 Y9.63283
G01 X-120.72454 Y9.48579
G01 X-120.74702 Y9.43169
G01 X-120.79962 Y9.28465
G01 X-120.81189 Y9.24429
G01 X-120.84875 Y9.09727
G01 X-120.85500 Y9.06588
G01 X-120.87681 Y8.91884
G01 X-120.87938 Y8.89263
G01 X-120.88662 Y8.74561
G01 X-120.88690 Y8.73332
G01 X-120.88690 Y7.23332
G01 X-120.88662 Y7.22105
G01 X-120.87938 Y7.07404
G01 X-120.87681 Y7.04780
G01 X-120.85500 Y6.90078
G01 X-120.84875 Y6.86939
G01 X-120.81192 Y6.72235
G01 X-120.79962 Y6.68196
G01 X-120.74702 Y6.53495
G01 X-120.72457 Y6.48090
G01 X-120.65502 Y6.33386
G01 X-120.61545 Y6.26004
G01 X-120.59942 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-121.25190 Y4.98971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-121.25190 Y4.98971
G01 X-121.49746 Y4.74412
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-121.25195 Y4.63693 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-121.25195 Y4.63693
G01 X-121.25190 Y4.98971
G01 X-121.15101 Y5.23335
G01 X-121.13473 Y5.27003
G01 X-121.06797 Y5.41118
G01 X-121.03782 Y5.46769
G01 X-121.02225 Y5.49370
G01 X-121.00773 Y5.51933
G01 X-120.96503 Y5.59924
G01 X-120.93772 Y5.64483
G01 X-120.93457 Y5.64953
G01 X-120.90811 Y5.69367
G01 X-120.86569 Y5.77305
G01 X-120.83925 Y5.81717
G01 X-120.83610 Y5.82187
G01 X-120.80884 Y5.86738
G01 X-120.76609 Y5.94734
G01 X-120.73521 Y5.99880
G01 X-120.70155 Y6.05507
G01 X-120.65802 Y6.13652
G01 X-120.62347 Y6.19510
G01 X-120.61573 Y6.20711
G01 X-120.59942 Y6.23332
G01 X-119.73432 Y6.23332
G01 X-119.64750 Y6.28537
G01 X-119.60410 Y6.31432
G01 X-119.48472 Y6.40287
G01 X-119.44928 Y6.43193
G01 X-119.34022 Y6.53078
G01 X-119.30938 Y6.56162
G01 X-119.23981 Y6.63840
G01 X-119.22421 Y6.68194
G01 X-119.21192 Y6.72237
G01 X-119.17509 Y6.86941
G01 X-119.16884 Y6.90076
G01 X-119.14705 Y7.04777
G01 X-119.14446 Y7.07401
G01 X-119.13722 Y7.22103
G01 X-119.13691 Y7.23332
G01 X-119.13691 Y8.73332
G01 X-119.13722 Y8.74564
G01 X-119.14446 Y8.89265
G01 X-119.14702 Y8.91884
G01 X-119.16884 Y9.06588
G01 X-119.17509 Y9.09727
G01 X-119.21192 Y9.24426
G01 X-119.22421 Y9.28468
G01 X-119.27682 Y9.43174
G01 X-119.29930 Y9.48579
G01 X-119.36882 Y9.63281
G01 X-119.40834 Y9.70654
G01 X-119.49648 Y9.85358
G01 X-119.50189 Y9.86166
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.49748 Y4.74412 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.49748 Y4.74412
G01 X-114.25193 Y4.98969
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.25193 Y4.63693 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.25193 Y4.63693
G01 X-114.25193 Y4.98969
G01 X-114.15102 Y5.23335
G01 X-114.13474 Y5.27010
G01 X-114.06796 Y5.41125
G01 X-114.03784 Y5.46769
G01 X-114.02224 Y5.49370
G01 X-114.00774 Y5.51933
G01 X-113.96502 Y5.59924
G01 X-113.93771 Y5.64483
G01 X-113.93461 Y5.64948
G01 X-113.90812 Y5.69367
G01 X-113.86570 Y5.77305
G01 X-113.83924 Y5.81717
G01 X-113.83609 Y5.82187
G01 X-113.80886 Y5.86738
G01 X-113.76611 Y5.94734
G01 X-113.73522 Y5.99878
G01 X-113.70157 Y6.05507
G01 X-113.65806 Y6.13650
G01 X-113.62349 Y6.19510
G01 X-113.61574 Y6.20711
G01 X-113.59943 Y6.23332
G01 X-112.73434 Y6.23332
G01 X-112.64752 Y6.28537
G01 X-112.60408 Y6.31435
G01 X-112.48470 Y6.40287
G01 X-112.44932 Y6.43190
G01 X-112.34023 Y6.53078
G01 X-112.30937 Y6.56164
G01 X-112.23980 Y6.63840
G01 X-112.22423 Y6.68196
G01 X-112.21193 Y6.72235
G01 X-112.17510 Y6.86939
G01 X-112.16883 Y6.90076
G01 X-112.14704 Y7.04780
G01 X-112.14445 Y7.07401
G01 X-112.13723 Y7.22105
G01 X-112.13693 Y7.23332
G01 X-112.13693 Y8.73332
G01 X-112.13723 Y8.74561
G01 X-112.14445 Y8.89263
G01 X-112.14704 Y8.91884
G01 X-112.16883 Y9.06588
G01 X-112.17155 Y9.08145
G01 X-112.18062 Y9.09433
G01 X-112.26916 Y9.21371
G01 X-112.28587 Y9.23405
G01 X-112.38473 Y9.34315
G01 X-112.40210 Y9.36052
G01 X-112.51117 Y9.45938
G01 X-112.53154 Y9.47609
G01 X-112.65090 Y9.56463
G01 X-112.67754 Y9.58241
G01 X-112.80756 Y9.66034
G01 X-112.84483 Y9.68020
G01 X-112.98597 Y9.74696
G01 X-113.04008 Y9.76931
G01 X-113.19321 Y9.82412
G01 X-113.27332 Y9.84830
G01 X-113.43959 Y9.88996
G01 X-113.44874 Y9.89199
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-110.75189 Y10.70179 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-110.75189 Y10.70179
G01 X-111.77193 Y11.72183
G01 X-111.77188 Y12.69079
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.11691 Y14.40394 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.11691 Y14.40394
G01 X-112.12695 Y14.42810
G01 X-112.12695 Y18.15131
G01 X-112.07569 Y18.24719
G01 X-112.03893 Y18.33591
G01 X-111.99342 Y18.48600
G01 X-111.97693 Y18.56873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-111.97693 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-111.97693 Y19.79974
G01 X-111.99342 Y19.88262
G01 X-112.03893 Y20.03271
G01 X-112.07569 Y20.12143
G01 X-112.14963 Y20.25976
G01 X-112.20299 Y20.33962
G01 X-112.21272 Y20.35148
G01 X-111.32733 Y21.23685
G01 X-110.52885 Y22.03532
G01 X-105.73194 Y22.03532
G01 X-105.68391 Y22.03769
G01 X-105.58634 Y22.04729
G01 X-105.49214 Y22.06603
G01 X-105.39833 Y22.09448
G01 X-105.30959 Y22.13123
G01 X-105.22315 Y22.17746
G01 X-105.14329 Y22.23083
G01 X-105.06752 Y22.29301
G01 X-105.03189 Y22.32529
G01 X-102.99989 Y24.35729
G01 X-102.96760 Y24.39293
G01 X-102.94533 Y24.42000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-109.70025 Y25.56435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-109.70025 Y25.56435
G01 X-109.73246 Y25.56435
G01 X-109.76248 Y25.52777
G01 X-109.83040 Y25.45988
G01 X-109.86693 Y25.42988
G01 X-109.86693 Y25.39765
G01 X-109.84130 Y25.41731
G01 X-109.71991 Y25.53872
G01 X-109.70025 Y25.56435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-111.97693 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-111.97693 Y26.18876
G01 X-111.96047 Y26.10600
G01 X-111.91493 Y25.95591
G01 X-111.87818 Y25.86719
G01 X-111.80426 Y25.72886
G01 X-111.78156 Y25.69488
G01 X-111.75090 Y25.64903
G01 X-111.65141 Y25.52777
G01 X-111.58349 Y25.45988
G01 X-111.54694 Y25.42988
G01 X-111.54694 Y25.39765
G01 X-111.57251 Y25.41728
G01 X-111.71661 Y25.56140
G01 X-111.71844 Y25.55962
G01 X-111.77236 Y25.61355
G01 X-111.83355 Y25.66051
G01 X-111.90561 Y25.70641
G01 X-111.98455 Y25.73910
G01 X-112.06799 Y25.75759
G01 X-112.12992 Y25.76574
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.46166 Y25.97862 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.46166 Y25.97862
G01 X-114.54096 Y25.98416
G01 X-114.57154 Y25.98093
G01 X-114.59671 Y25.96127
G01 X-114.67180 Y25.89719
G01 X-114.68340 Y25.88713
G01 X-114.74510 Y25.83262
G01 X-114.79463 Y25.78505
G01 X-114.84472 Y25.73252
G01 X-114.85712 Y25.71919
G01 X-114.88846 Y25.68459
G01 X-114.90845 Y25.66155
G01 X-114.94983 Y25.61591
G01 X-114.99852 Y25.56724
G01 X-115.03992 Y25.52970
G01 X-115.11990 Y25.46796
G01 X-115.17644 Y25.42851
G01 X-115.18546 Y25.42284
G01 X-115.31510 Y25.35520
G01 X-115.34604 Y25.34002
G01 X-115.37875 Y25.32884
G01 X-115.51823 Y25.28502
G01 X-115.52864 Y25.28266
G01 X-115.59643 Y25.27057
G01 X-115.69666 Y25.25767
G01 X-115.75247 Y25.25493
G01 X-115.82138 Y25.25493
G01 X-115.87718 Y25.25767
G01 X-115.97743 Y25.27057
G01 X-116.04525 Y25.28266
G01 X-116.05564 Y25.28502
G01 X-116.19509 Y25.32884
G01 X-116.22778 Y25.34002
G01 X-116.25874 Y25.35520
G01 X-116.38838 Y25.42287
G01 X-116.39740 Y25.42851
G01 X-116.45396 Y25.46790
G01 X-116.53392 Y25.52970
G01 X-116.57532 Y25.56722
G01 X-116.62402 Y25.61591
G01 X-116.66537 Y25.66155
G01 X-116.71116 Y25.71159
G01 X-116.73082 Y25.73112
G01 X-116.76509 Y25.76757
G01 X-116.78000 Y25.78457
G01 X-116.90161 Y25.89737
G01 X-116.92742 Y25.91713
G01 X-116.98040 Y25.96038
G01 X-116.99646 Y25.97436
G01 X-117.00166 Y25.97862
G01 X-117.00187 Y25.97877
G01 X-117.04047 Y26.10600
G01 X-117.05693 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.13671 Y25.96127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.13671 Y25.96127
G01 X-117.11154 Y25.98093
G01 X-117.08096 Y25.98416
G01 X-117.00166 Y25.97862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.59671 Y25.96127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.59671 Y25.96127
G01 X-114.57129 Y25.98119
G01 X-114.53342 Y26.10600
G01 X-114.51691 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-111.97693 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-111.97693 Y27.41974
G01 X-111.99342 Y27.50262
G01 X-112.03893 Y27.65271
G01 X-112.07569 Y27.74143
G01 X-112.14963 Y27.87976
G01 X-112.20299 Y27.95962
G01 X-112.25692 Y28.02533
G01 X-112.25689 Y28.60158
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.51691 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.51691 Y29.21971
G01 X-114.53342 Y29.13701
G01 X-114.57893 Y28.98692
G01 X-114.61569 Y28.89817
G01 X-114.68963 Y28.75987
G01 X-114.74299 Y28.68001
G01 X-114.79692 Y28.61428
G01 X-114.79692 Y28.02533
G01 X-114.76192 Y27.98268
G01 X-114.74299 Y27.95962
G01 X-114.68963 Y27.87976
G01 X-114.61569 Y27.74143
G01 X-114.57893 Y27.65271
G01 X-114.53342 Y27.50262
G01 X-114.51691 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.05693 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.05693 Y27.41974
G01 X-117.07342 Y27.50262
G01 X-117.11893 Y27.65271
G01 X-117.15569 Y27.74143
G01 X-117.22963 Y27.87976
G01 X-117.28299 Y27.95962
G01 X-117.30192 Y27.98268
G01 X-117.33692 Y28.02533
G01 X-117.33692 Y28.61428
G01 X-117.28299 Y28.68001
G01 X-117.22963 Y28.75987
G01 X-117.15569 Y28.89817
G01 X-117.11893 Y28.98692
G01 X-117.07342 Y29.13701
G01 X-117.05693 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.05693 Y30.45072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.05693 Y30.45072
G01 X-117.07342 Y30.53363
G01 X-117.11203 Y30.66091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.00230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.00230 Y30.65867
G01 X-117.03275 Y30.65550
G01 X-117.11203 Y30.66091
G01 X-117.11738 Y30.66530
G01 X-117.13351 Y30.67935
G01 X-117.18642 Y30.72255
G01 X-117.21215 Y30.74219
G01 X-117.33379 Y30.85504
G01 X-117.34870 Y30.87201
G01 X-117.38304 Y30.90856
G01 X-117.40260 Y30.92799
G01 X-117.44860 Y30.97826
G01 X-117.48985 Y31.02377
G01 X-117.53849 Y31.07241
G01 X-117.57992 Y31.10996
G01 X-117.65988 Y31.17173
G01 X-117.71642 Y31.21112
G01 X-117.72549 Y31.21679
G01 X-117.85505 Y31.28443
G01 X-117.88601 Y31.29964
G01 X-117.91251 Y31.30881
G01 X-117.91875 Y31.31082
G01 X-118.05823 Y31.35461
G01 X-118.06864 Y31.35700
G01 X-118.13648 Y31.36911
G01 X-118.23669 Y31.38199
G01 X-118.29252 Y31.38473
G01 X-118.36132 Y31.38473
G01 X-118.41715 Y31.38199
G01 X-118.51738 Y31.36911
G01 X-118.58523 Y31.35700
G01 X-118.59566 Y31.35461
G01 X-118.73509 Y31.31082
G01 X-118.76780 Y31.29964
G01 X-118.79879 Y31.28443
G01 X-118.92835 Y31.21679
G01 X-118.93742 Y31.21112
G01 X-118.99396 Y31.17173
G01 X-119.07392 Y31.10996
G01 X-119.11535 Y31.07241
G01 X-119.16399 Y31.02377
G01 X-119.20524 Y30.97826
G01 X-119.22548 Y30.95494
G01 X-119.25683 Y30.92037
G01 X-119.26910 Y30.90716
G01 X-119.31921 Y30.85463
G01 X-119.36874 Y30.80704
G01 X-119.43044 Y30.75255
G01 X-119.44204 Y30.74247
G01 X-119.51723 Y30.67831
G01 X-119.54230 Y30.65870
G01 X-119.54230 Y30.65867
G01 X-119.54260 Y30.65847
G01 X-119.58047 Y30.53363
G01 X-119.59693 Y30.45072
G01 X-119.59693 Y29.21971
G01 X-119.58047 Y29.13701
G01 X-119.53493 Y28.98692
G01 X-119.49818 Y28.89817
G01 X-119.42426 Y28.75987
G01 X-119.37090 Y28.68001
G01 X-119.31692 Y28.61425
G01 X-119.31692 Y28.02538
G01 X-119.37090 Y27.95962
G01 X-119.42426 Y27.87976
G01 X-119.49818 Y27.74143
G01 X-119.53493 Y27.65271
G01 X-119.58047 Y27.50262
G01 X-119.59693 Y27.41974
G01 X-119.59693 Y26.18876
G01 X-119.58047 Y26.10600
G01 X-119.53493 Y25.95591
G01 X-119.49818 Y25.86719
G01 X-119.42426 Y25.72886
G01 X-119.37090 Y25.64903
G01 X-119.35192 Y25.62589
G01 X-119.27141 Y25.52777
G01 X-119.20349 Y25.45988
G01 X-119.08225 Y25.36036
G01 X-119.00237 Y25.30700
G01 X-118.86407 Y25.23306
G01 X-118.77532 Y25.19633
G01 X-118.62526 Y25.15081
G01 X-118.53105 Y25.13204
G01 X-118.37496 Y25.11667
G01 X-118.27890 Y25.11667
G01 X-118.12284 Y25.13204
G01 X-118.02864 Y25.15081
G01 X-118.02643 Y25.15147
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.59693 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.59693 Y26.18876
G01 X-119.61342 Y26.10600
G01 X-119.65893 Y25.95591
G01 X-119.69569 Y25.86719
G01 X-119.76963 Y25.72886
G01 X-119.82299 Y25.64903
G01 X-119.92248 Y25.52777
G01 X-119.99040 Y25.45988
G01 X-120.11164 Y25.36036
G01 X-120.19150 Y25.30700
G01 X-120.32980 Y25.23306
G01 X-120.41855 Y25.19633
G01 X-120.52815 Y25.16308
G01 X-120.56864 Y25.15081
G01 X-120.66284 Y25.13204
G01 X-120.81890 Y25.11667
G01 X-120.91496 Y25.11667
G01 X-121.07105 Y25.13204
G01 X-121.16526 Y25.15081
G01 X-121.31532 Y25.19633
G01 X-121.40407 Y25.23306
G01 X-121.54237 Y25.30700
G01 X-121.62225 Y25.36036
G01 X-121.74349 Y25.45988
G01 X-121.81141 Y25.52777
G01 X-121.89192 Y25.62589
G01 X-121.91090 Y25.64903
G01 X-121.96426 Y25.72886
G01 X-122.03818 Y25.86719
G01 X-122.07493 Y25.95591
G01 X-122.12047 Y26.10600
G01 X-122.13691 Y26.18876
G01 X-122.13691 Y27.41974
G01 X-122.12047 Y27.50262
G01 X-122.07493 Y27.65271
G01 X-122.03818 Y27.74143
G01 X-121.96426 Y27.87976
G01 X-121.91090 Y27.95962
G01 X-121.85692 Y28.02538
G01 X-121.85692 Y28.61425
G01 X-121.91090 Y28.68001
G01 X-121.96426 Y28.75987
G01 X-122.03818 Y28.89817
G01 X-122.07493 Y28.98692
G01 X-122.12047 Y29.13701
G01 X-122.13691 Y29.21971
G01 X-122.13691 Y30.45072
G01 X-122.12047 Y30.53363
G01 X-122.08260 Y30.65847
G01 X-122.08230 Y30.65867
G01 X-122.08230 Y30.65870
G01 X-122.05723 Y30.67831
G01 X-121.98204 Y30.74247
G01 X-121.97044 Y30.75255
G01 X-121.90874 Y30.80704
G01 X-121.85921 Y30.85463
G01 X-121.80910 Y30.90716
G01 X-121.79683 Y30.92037
G01 X-121.76548 Y30.95494
G01 X-121.74524 Y30.97826
G01 X-121.70399 Y31.02377
G01 X-121.65535 Y31.07241
G01 X-121.61392 Y31.10996
G01 X-121.53396 Y31.17173
G01 X-121.47742 Y31.21112
G01 X-121.46835 Y31.21679
G01 X-121.33879 Y31.28443
G01 X-121.30780 Y31.29964
G01 X-121.27509 Y31.31082
G01 X-121.13567 Y31.35461
G01 X-121.12523 Y31.35700
G01 X-121.05738 Y31.36911
G01 X-120.95715 Y31.38199
G01 X-120.90132 Y31.38473
G01 X-120.83252 Y31.38473
G01 X-120.77669 Y31.38199
G01 X-120.67648 Y31.36911
G01 X-120.60864 Y31.35700
G01 X-120.59823 Y31.35461
G01 X-120.45875 Y31.31082
G01 X-120.45251 Y31.30881
G01 X-120.42601 Y31.29964
G01 X-120.39505 Y31.28443
G01 X-120.26549 Y31.21679
G01 X-120.25642 Y31.21112
G01 X-120.19988 Y31.17173
G01 X-120.11992 Y31.10996
G01 X-120.07849 Y31.07241
G01 X-120.02985 Y31.02377
G01 X-119.98860 Y30.97826
G01 X-119.94260 Y30.92799
G01 X-119.92304 Y30.90856
G01 X-119.88870 Y30.87201
G01 X-119.87379 Y30.85504
G01 X-119.75215 Y30.74219
G01 X-119.72642 Y30.72255
G01 X-119.67351 Y30.67935
G01 X-119.65738 Y30.66530
G01 X-119.65203 Y30.66091
G01 X-119.57275 Y30.65550
G01 X-119.54230 Y30.65867
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.65203 Y30.66091 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.65203 Y30.66091
G01 X-119.61342 Y30.53363
G01 X-119.59693 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.59693 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.59693 Y29.21971
G01 X-119.61342 Y29.13701
G01 X-119.65893 Y28.98692
G01 X-119.69569 Y28.89817
G01 X-119.76963 Y28.75987
G01 X-119.82299 Y28.68001
G01 X-119.87692 Y28.61428
G01 X-119.87692 Y28.02533
G01 X-119.84192 Y27.98268
G01 X-119.82299 Y27.95962
G01 X-119.76963 Y27.87976
G01 X-119.69569 Y27.74143
G01 X-119.65893 Y27.65271
G01 X-119.61342 Y27.50262
G01 X-119.59693 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13691 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13691 Y27.41974
G01 X-122.15342 Y27.50262
G01 X-122.19893 Y27.65271
G01 X-122.23569 Y27.74143
G01 X-122.30963 Y27.87976
G01 X-122.36299 Y27.95962
G01 X-122.38192 Y27.98268
G01 X-122.41692 Y28.02533
G01 X-122.41692 Y28.61428
G01 X-122.36299 Y28.68001
G01 X-122.30963 Y28.75987
G01 X-122.23569 Y28.89817
G01 X-122.19893 Y28.98692
G01 X-122.15342 Y29.13701
G01 X-122.13691 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.13691 Y30.45072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.13691 Y30.45072
G01 X-122.15342 Y30.53363
G01 X-122.19203 Y30.66091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.08230 Y30.65867 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.08230 Y30.65867
G01 X-122.11275 Y30.65550
G01 X-122.19203 Y30.66091
G01 X-122.19738 Y30.66530
G01 X-122.21351 Y30.67935
G01 X-122.26642 Y30.72255
G01 X-122.29215 Y30.74219
G01 X-122.41379 Y30.85504
G01 X-122.42870 Y30.87201
G01 X-122.46304 Y30.90856
G01 X-122.48260 Y30.92799
G01 X-122.52860 Y30.97826
G01 X-122.56985 Y31.02377
G01 X-122.61849 Y31.07241
G01 X-122.65992 Y31.10996
G01 X-122.73988 Y31.17173
G01 X-122.79642 Y31.21112
G01 X-122.80549 Y31.21679
G01 X-122.93505 Y31.28443
G01 X-122.96601 Y31.29964
G01 X-122.99251 Y31.30881
G01 X-122.99875 Y31.31082
G01 X-123.13823 Y31.35461
G01 X-123.14864 Y31.35700
G01 X-123.21648 Y31.36911
G01 X-123.31669 Y31.38199
G01 X-123.37252 Y31.38473
G01 X-123.44132 Y31.38473
G01 X-123.49715 Y31.38199
G01 X-123.59738 Y31.36911
G01 X-123.66523 Y31.35700
G01 X-123.67566 Y31.35461
G01 X-123.81509 Y31.31082
G01 X-123.84780 Y31.29964
G01 X-123.87879 Y31.28443
G01 X-124.00835 Y31.21679
G01 X-124.01742 Y31.21112
G01 X-124.07396 Y31.17173
G01 X-124.15392 Y31.10996
G01 X-124.19535 Y31.07241
G01 X-124.24399 Y31.02377
G01 X-124.28524 Y30.97826
G01 X-124.30548 Y30.95494
G01 X-124.33683 Y30.92037
G01 X-124.34910 Y30.90716
G01 X-124.39921 Y30.85463
G01 X-124.44874 Y30.80704
G01 X-124.51044 Y30.75255
G01 X-124.52204 Y30.74247
G01 X-124.59723 Y30.67831
G01 X-124.62230 Y30.65870
G01 X-124.62230 Y30.65867
G01 X-124.62260 Y30.65847
G01 X-124.66047 Y30.53363
G01 X-124.67693 Y30.45072
G01 X-124.67693 Y29.21971
G01 X-124.66047 Y29.13701
G01 X-124.61493 Y28.98692
G01 X-124.57818 Y28.89817
G01 X-124.50426 Y28.75987
G01 X-124.45090 Y28.68001
G01 X-124.39692 Y28.61425
G01 X-124.39692 Y28.02538
G01 X-124.45090 Y27.95962
G01 X-124.50426 Y27.87976
G01 X-124.57818 Y27.74143
G01 X-124.61493 Y27.65271
G01 X-124.66047 Y27.50262
G01 X-124.67693 Y27.41974
G01 X-124.67693 Y26.18876
G01 X-124.66047 Y26.10600
G01 X-124.61493 Y25.95591
G01 X-124.57818 Y25.86719
G01 X-124.50426 Y25.72886
G01 X-124.45090 Y25.64903
G01 X-124.43192 Y25.62589
G01 X-124.35141 Y25.52777
G01 X-124.28349 Y25.45988
G01 X-124.16225 Y25.36036
G01 X-124.08237 Y25.30700
G01 X-123.94407 Y25.23306
G01 X-123.85532 Y25.19633
G01 X-123.70526 Y25.15081
G01 X-123.61105 Y25.13204
G01 X-123.45496 Y25.11667
G01 X-123.35890 Y25.11667
G01 X-123.20284 Y25.13204
G01 X-123.10864 Y25.15081
G01 X-123.06815 Y25.16308
G01 X-122.95855 Y25.19633
G01 X-122.86980 Y25.23306
G01 X-122.73150 Y25.30700
G01 X-122.65164 Y25.36036
G01 X-122.53040 Y25.45988
G01 X-122.46248 Y25.52777
G01 X-122.36299 Y25.64903
G01 X-122.30963 Y25.72886
G01 X-122.23569 Y25.86719
G01 X-122.19893 Y25.95591
G01 X-122.15342 Y26.10600
G01 X-122.13691 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-117.91144 Y24.67832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-117.91144 Y24.67832
G01 X-131.63884 Y24.67832
G01 X-132.93592 Y25.97540
G01 X-132.93592 Y30.29340
G01 X-132.97196 Y30.35441
G01 X-133.00392 Y30.43155
G01 X-133.05944 Y30.63500
G01 X-133.06958 Y30.71212
G01 X-133.07567 Y30.80437
G01 X-133.07567 Y33.44234
G01 X-133.07651 Y33.47680
G01 X-133.07808 Y33.50906
G01 X-133.08647 Y33.57431
G01 X-133.09833 Y33.64101
G01 X-133.09866 Y33.64206
G01 X-133.12805 Y33.73558
G01 X-133.13917 Y33.76822
G01 X-133.15439 Y33.79918
G01 X-133.19973 Y33.88607
G01 X-133.20023 Y33.88701
G01 X-133.23904 Y33.94261
G01 X-133.27923 Y33.99463
G01 X-133.30097 Y34.01861
G01 X-133.32469 Y34.04355
G01 X-134.61146 Y35.33029
G01 X-134.64288 Y35.36387
G01 X-134.66858 Y35.39318
G01 X-134.73706 Y35.48505
G01 X-134.74145 Y35.51396
G01 X-134.75159 Y35.59107
G01 X-134.75766 Y35.68333
G01 X-134.75766 Y38.24398
G01 X-134.75426 Y38.31301
G01 X-134.74854 Y38.37116
G01 X-134.71100 Y38.54258
G01 X-134.68484 Y38.61969
G01 X-134.61793 Y38.75246
G01 X-134.61791 Y38.75249
G01 X-134.60422 Y38.77971
G01 X-134.53660 Y38.81489
G01 X-134.46533 Y38.84441
G01 X-134.42192 Y38.85810
G01 X-134.42192 Y39.09884
G01 X-134.45847 Y39.12886
G01 X-134.52639 Y39.19678
G01 X-134.61791 Y39.30826
G01 X-134.62240 Y39.32089
G01 X-134.65052 Y39.41329
G01 X-134.68979 Y39.57009
G01 X-134.70579 Y39.65040
G01 X-134.72908 Y39.80722
G01 X-134.73635 Y39.88083
G01 X-134.74405 Y40.03767
G01 X-134.74491 Y40.07331
G01 X-134.74491 Y40.87331
G01 X-134.74405 Y40.90897
G01 X-134.73635 Y41.06582
G01 X-134.72908 Y41.13942
G01 X-134.70579 Y41.29624
G01 X-134.68979 Y41.37656
G01 X-134.65052 Y41.53335
G01 X-134.62240 Y41.62576
G01 X-134.61791 Y41.63833
G01 X-134.61791 Y42.18908
G01 X-134.61793 Y42.18913
G01 X-134.65395 Y42.25263
G01 X-134.68588 Y42.32977
G01 X-134.74145 Y42.53333
G01 X-134.75159 Y42.61044
G01 X-134.75728 Y42.67933
G01 X-134.75807 Y42.70267
G01 X-134.75852 Y42.71379
G01 X-134.76010 Y42.74605
G01 X-134.76848 Y42.81130
G01 X-134.78037 Y42.87803
G01 X-134.78067 Y42.87905
G01 X-134.81003 Y42.97257
G01 X-134.82118 Y43.00521
G01 X-134.83640 Y43.03617
G01 X-134.88174 Y43.12306
G01 X-134.88227 Y43.12408
G01 X-134.92106 Y43.17963
G01 X-134.96124 Y43.23165
G01 X-134.98296 Y43.25560
G01 X-135.00671 Y43.28054
G01 X-137.99446 Y46.26829
G01 X-138.02590 Y46.30187
G01 X-138.05158 Y46.33118
G01 X-138.12006 Y46.42303
G01 X-138.12445 Y46.45196
G01 X-138.13459 Y46.52908
G01 X-138.14069 Y46.62130
G01 X-138.14069 Y47.16235
G01 X-138.14185 Y47.20301
G01 X-138.14389 Y47.22054
G01 X-138.14818 Y47.23756
G01 X-138.17035 Y47.30662
G01 X-138.20373 Y47.36354
G01 X-138.21419 Y47.37914
G01 X-138.27411 Y47.43903
G01 X-138.34665 Y47.48290
G01 X-138.43273 Y47.50936
G01 X-138.45024 Y47.51140
G01 X-138.49093 Y47.51259
G01 X-138.86606 Y47.51259
G01 X-138.91201 Y47.51409
G01 X-138.95092 Y47.51663
G01 X-139.09364 Y47.54043
G01 X-139.17076 Y47.56110
G01 X-139.39054 Y47.65399
G01 X-139.39580 Y47.66151
G01 X-139.43436 Y47.72831
G01 X-139.47045 Y47.80571
G01 X-139.49057 Y47.88076
G01 X-139.46397 Y47.97324
G01 X-139.43202 Y48.05038
G01 X-139.32735 Y48.23365
G01 X-139.28000 Y48.29534
G01 X-139.21909 Y48.36484
G01 X-137.75011 Y49.83384
G01 X-137.71653 Y49.86529
G01 X-137.68722 Y49.89097
G01 X-137.59535 Y49.95947
G01 X-137.56644 Y49.96384
G01 X-137.48933 Y49.97400
G01 X-137.39710 Y49.98007
G01 X-134.90338 Y49.98007
G01 X-134.88512 Y49.97984
G01 X-134.86950 Y49.97944
G01 X-134.75779 Y49.96763
G01 X-134.68067 Y49.95333
G01 X-134.46807 Y49.88292
G01 X-134.39096 Y49.84614
G01 X-134.38116 Y49.84032
G01 X-134.37930 Y49.83920
G01 X-134.33869 Y49.77898
G01 X-134.30394 Y49.70095
G01 X-134.28329 Y49.61807
G01 X-134.27702 Y49.57850
G01 X-134.27765 Y49.57708
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-134.38116 Y49.84032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-134.38116 Y49.84032
G01 X-131.88192 Y49.84032
G01 X-131.88192 Y49.46775
G01 X-131.91847 Y49.43778
G01 X-131.98639 Y49.36986
G01 X-132.08588 Y49.24863
G01 X-132.13925 Y49.16875
G01 X-132.21319 Y49.03044
G01 X-132.24994 Y48.94170
G01 X-132.29546 Y48.79163
G01 X-132.31194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.31194 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.31194 Y47.47777
G01 X-132.32840 Y47.39501
G01 X-132.36628 Y47.27015
G01 X-132.36653 Y47.26994
G01 X-132.39162 Y47.25033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-132.25665 Y47.26758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-132.25665 Y47.26758
G01 X-132.33605 Y47.27314
G01 X-132.36653 Y47.26994
G01 X-132.36655 Y47.26994
G01 X-132.39162 Y47.25033
G01 X-132.46683 Y47.18617
G01 X-132.47831 Y47.17619
G01 X-132.54004 Y47.12173
G01 X-132.58967 Y47.07401
G01 X-132.63973 Y47.02153
G01 X-132.65213 Y47.00820
G01 X-132.68347 Y46.97360
G01 X-132.70361 Y46.95039
G01 X-132.74484 Y46.90489
G01 X-132.79348 Y46.85625
G01 X-132.83490 Y46.81871
G01 X-132.91484 Y46.75694
G01 X-132.97146 Y46.71749
G01 X-132.98047 Y46.71185
G01 X-133.11011 Y46.64419
G01 X-133.14108 Y46.62900
G01 X-133.17369 Y46.61785
G01 X-133.31321 Y46.57403
G01 X-133.32355 Y46.57165
G01 X-133.39147 Y46.55953
G01 X-133.49167 Y46.54665
G01 X-133.54753 Y46.54391
G01 X-133.61634 Y46.54391
G01 X-133.67217 Y46.54665
G01 X-133.77237 Y46.55953
G01 X-133.84026 Y46.57165
G01 X-133.85065 Y46.57403
G01 X-133.99015 Y46.61785
G01 X-134.02279 Y46.62900
G01 X-134.05377 Y46.64421
G01 X-134.18337 Y46.71185
G01 X-134.19241 Y46.71752
G01 X-134.24897 Y46.75691
G01 X-134.32891 Y46.81869
G01 X-134.37033 Y46.85623
G01 X-134.41903 Y46.90492
G01 X-134.45654 Y46.94632
G01 X-134.51834 Y47.02628
G01 X-134.55774 Y47.08285
G01 X-134.56340 Y47.09186
G01 X-134.63104 Y47.22148
G01 X-134.64626 Y47.25247
G01 X-134.65738 Y47.28508
G01 X-134.70122 Y47.42463
G01 X-134.70361 Y47.43494
G01 X-134.71572 Y47.50286
G01 X-134.72860 Y47.60309
G01 X-134.73135 Y47.65892
G01 X-134.73218 Y47.69331
G01 X-134.73218 Y48.49331
G01 X-134.73135 Y48.52773
G01 X-134.72860 Y48.58356
G01 X-134.71572 Y48.68378
G01 X-134.70361 Y48.75170
G01 X-134.70122 Y48.76204
G01 X-134.65738 Y48.90156
G01 X-134.64626 Y48.93418
G01 X-134.63104 Y48.96516
G01 X-134.56340 Y49.09478
G01 X-134.55774 Y49.10380
G01 X-134.51834 Y49.16036
G01 X-134.49817 Y49.18645
G01 X-134.44603 Y49.26400
G01 X-134.43033 Y49.29102
G01 X-134.40536 Y49.33100
G01 X-134.38984 Y49.35417
G01 X-134.30991 Y49.50400
G01 X-134.29558 Y49.53804
G01 X-134.27765 Y49.57708
G01 X-134.25738 Y49.59064
G01 X-134.11908 Y49.66455
G01 X-134.03033 Y49.70131
G01 X-133.88024 Y49.74685
G01 X-133.78603 Y49.76557
G01 X-133.62998 Y49.78096
G01 X-133.53391 Y49.78096
G01 X-133.37783 Y49.76557
G01 X-133.28362 Y49.74685
G01 X-133.13356 Y49.70131
G01 X-133.04481 Y49.66455
G01 X-132.90651 Y49.59064
G01 X-132.82662 Y49.53727
G01 X-132.70539 Y49.43778
G01 X-132.63747 Y49.36986
G01 X-132.53798 Y49.24863
G01 X-132.48461 Y49.16875
G01 X-132.41070 Y49.03044
G01 X-132.37392 Y48.94170
G01 X-132.32840 Y48.79163
G01 X-132.31194 Y48.70880
G01 X-132.31194 Y47.47777
G01 X-132.29546 Y47.39501
G01 X-132.25688 Y47.26776
G01 X-132.25665 Y47.26758
G01 X-132.25147 Y47.26334
G01 X-132.23534 Y47.24929
G01 X-132.18243 Y47.20609
G01 X-132.15667 Y47.18643
G01 X-132.03503 Y47.07360
G01 X-132.02015 Y47.05663
G01 X-131.98583 Y47.02013
G01 X-131.96622 Y47.00065
G01 X-131.92038 Y46.95056
G01 X-131.87903 Y46.90492
G01 X-131.83033 Y46.85623
G01 X-131.78891 Y46.81869
G01 X-131.70897 Y46.75691
G01 X-131.65241 Y46.71752
G01 X-131.64337 Y46.71185
G01 X-131.51377 Y46.64421
G01 X-131.48279 Y46.62900
G01 X-131.45015 Y46.61785
G01 X-131.31065 Y46.57403
G01 X-131.30026 Y46.57165
G01 X-131.23237 Y46.55953
G01 X-131.13217 Y46.54665
G01 X-131.07634 Y46.54391
G01 X-131.00753 Y46.54391
G01 X-130.95167 Y46.54665
G01 X-130.85147 Y46.55953
G01 X-130.78355 Y46.57165
G01 X-130.77321 Y46.57403
G01 X-130.63369 Y46.61785
G01 X-130.60108 Y46.62900
G01 X-130.57011 Y46.64419
G01 X-130.44047 Y46.71185
G01 X-130.43146 Y46.71749
G01 X-130.37484 Y46.75694
G01 X-130.29490 Y46.81871
G01 X-130.25348 Y46.85625
G01 X-130.20484 Y46.90489
G01 X-130.16361 Y46.95039
G01 X-130.14347 Y46.97360
G01 X-130.11213 Y47.00820
G01 X-130.09973 Y47.02153
G01 X-130.04967 Y47.07401
G01 X-130.00004 Y47.12173
G01 X-129.93831 Y47.17619
G01 X-129.92683 Y47.18617
G01 X-129.85162 Y47.25033
G01 X-129.82653 Y47.26994
G01 X-129.82627 Y47.27015
G01 X-129.78840 Y47.39501
G01 X-129.77194 Y47.47777
G01 X-129.77194 Y48.70880
G01 X-129.75546 Y48.79163
G01 X-129.70994 Y48.94170
G01 X-129.67319 Y49.03044
G01 X-129.59925 Y49.16875
G01 X-129.54588 Y49.24863
G01 X-129.44639 Y49.36986
G01 X-129.37847 Y49.43778
G01 X-129.34192 Y49.46775
G01 X-129.34192 Y50.93237
G01 X-129.29100 Y51.05533
G01 X-129.27263 Y51.09678
G01 X-129.24147 Y51.16267
G01 X-129.20420 Y51.23250
G01 X-129.16786 Y51.29318
G01 X-129.12889 Y51.35155
G01 X-129.08759 Y51.40725
G01 X-129.04622 Y51.45769
G01 X-129.00006 Y51.50857
G01 X-128.97817 Y51.53158
G01 X-127.54215 Y52.96760
G01 X-127.51914 Y52.98949
G01 X-127.46827 Y53.03564
G01 X-127.41782 Y53.07702
G01 X-127.36212 Y53.11832
G01 X-127.30375 Y53.15728
G01 X-127.24307 Y53.19363
G01 X-127.17327 Y53.23089
G01 X-127.10738 Y53.26203
G01 X-127.06590 Y53.28042
G01 X-126.94297 Y53.33135
G01 X-117.10992 Y53.33132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-118.92127 Y58.05547 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-118.92127 Y58.05547
G01 X-118.98601 Y58.00327
G01 X-119.03503 Y57.96690
G01 X-119.09983 Y57.92347
G01 X-119.14883 Y57.89410
G01 X-119.20064 Y57.86634
G01 X-119.24964 Y57.84315
G01 X-119.29262 Y57.82529
G01 X-119.34164 Y57.80774
G01 X-119.37842 Y57.79657
G01 X-119.42744 Y57.78430
G01 X-119.45995 Y57.77782
G01 X-119.50895 Y57.77053
G01 X-119.53910 Y57.76756
G01 X-119.58812 Y57.76515
G01 X-119.60293 Y57.76477
G01 X-121.10295 Y57.76477
G01 X-121.11773 Y57.76515
G01 X-121.16675 Y57.76756
G01 X-121.19690 Y57.77053
G01 X-121.24590 Y57.77782
G01 X-121.27841 Y57.78430
G01 X-121.32743 Y57.79657
G01 X-121.36421 Y57.80774
G01 X-121.41324 Y57.82529
G01 X-121.45621 Y57.84315
G01 X-121.50521 Y57.86634
G01 X-121.55703 Y57.89410
G01 X-121.60602 Y57.92347
G01 X-121.67082 Y57.96690
G01 X-121.69759 Y57.98676
G01 X-121.70937 Y58.00642
G01 X-121.74687 Y58.07670
G01 X-121.76912 Y58.12377
G01 X-121.78728 Y58.16474
G01 X-121.84290 Y58.29903
G01 X-122.08994 Y58.54607
G01 X-122.08994 Y59.51531
G01 X-122.09228 Y59.56334
G01 X-122.11631 Y59.80721
G01 X-122.13505 Y59.90141
G01 X-122.19225 Y60.09006
G01 X-122.22446 Y60.11739
G01 X-122.23561 Y60.12697
G01 X-122.30787 Y60.18993
G01 X-122.39543 Y60.27840
G01 X-122.44648 Y60.33857
G01 X-122.47719 Y60.37733
G01 X-122.50379 Y60.41338
G01 X-122.51875 Y60.43291
G01 X-122.62746 Y60.56989
G01 X-122.67465 Y60.62196
G01 X-122.72329 Y60.67060
G01 X-122.77539 Y60.71782
G01 X-122.91234 Y60.82651
G01 X-122.93990 Y60.84731
G01 X-122.96967 Y60.86481
G01 X-123.12253 Y60.94977
G01 X-123.18608 Y60.97982
G01 X-123.24968 Y61.00616
G01 X-123.31582 Y61.02983
G01 X-123.48400 Y61.07784
G01 X-123.51740 Y61.08650
G01 X-123.55159 Y61.09130
G01 X-123.72530 Y61.11127
G01 X-123.79550 Y61.11472
G01 X-123.86436 Y61.11472
G01 X-123.93454 Y61.11127
G01 X-124.10825 Y61.09130
G01 X-124.14244 Y61.08650
G01 X-124.17584 Y61.07787
G01 X-124.34402 Y61.02983
G01 X-124.41016 Y61.00616
G01 X-124.45443 Y60.98861
G01 X-124.47376 Y60.97982
G01 X-124.53733 Y60.94977
G01 X-124.69017 Y60.86481
G01 X-124.71991 Y60.84731
G01 X-124.74749 Y60.82651
G01 X-124.88445 Y60.71782
G01 X-124.93655 Y60.67060
G01 X-124.98519 Y60.62196
G01 X-125.03241 Y60.56987
G01 X-125.14109 Y60.43291
G01 X-125.16192 Y60.40532
G01 X-125.17940 Y60.37558
G01 X-125.26436 Y60.22272
G01 X-125.26797 Y60.21513
G01 X-125.27807 Y60.19458
G01 X-125.28699 Y60.17723
G01 X-125.29608 Y60.16009
G01 X-125.32992 Y60.09837
G01 X-125.34419 Y60.07352
G01 X-125.38506 Y60.00533
G01 X-125.47216 Y59.88544
G01 X-125.53378 Y59.81394
G01 X-125.53982 Y59.80688
G01 X-125.54406 Y59.80190
G01 X-125.56758 Y59.56334
G01 X-125.56992 Y59.51531
G01 X-125.56992 Y57.82532
G01 X-125.56758 Y57.77731
G01 X-125.54356 Y57.53345
G01 X-125.52481 Y57.43924
G01 X-125.45369 Y57.20475
G01 X-125.41691 Y57.11600
G01 X-125.30142 Y56.89990
G01 X-125.24805 Y56.82001
G01 X-125.09258 Y56.63061
G01 X-125.06030 Y56.59497
G01 X-123.59980 Y55.13447
G01 X-123.56416 Y55.10219
G01 X-123.37475 Y54.94671
G01 X-123.29487 Y54.89335
G01 X-123.07876 Y54.77785
G01 X-122.99002 Y54.74107
G01 X-122.75552 Y54.66995
G01 X-122.66132 Y54.65121
G01 X-122.41745 Y54.62718
G01 X-122.36944 Y54.62484
G01 X-117.00943 Y54.62484
G01 X-117.04825 Y54.56675
G01 X-117.12219 Y54.42845
G01 X-117.15894 Y54.33970
G01 X-117.20446 Y54.18961
G01 X-117.22320 Y54.09541
G01 X-117.23857 Y53.93935
G01 X-117.23857 Y53.84329
G01 X-117.22320 Y53.68720
G01 X-117.20446 Y53.59299
G01 X-117.15894 Y53.44293
G01 X-117.12219 Y53.35418
G01 X-117.10992 Y53.33132
G01 X-116.97908 Y53.25289
G01 X-116.90250 Y53.21184
G01 X-116.74568 Y53.13767
G01 X-116.68990 Y53.11448
G01 X-116.53306 Y53.05837
G01 X-116.49178 Y53.04583
G01 X-116.33496 Y53.00653
G01 X-116.30319 Y53.00021
G01 X-116.14634 Y52.97694
G01 X-116.12003 Y52.97435
G01 X-115.96321 Y52.96663
G01 X-115.93865 Y52.96663
G01 X-115.78180 Y52.97435
G01 X-115.75549 Y52.97694
G01 X-115.59867 Y53.00021
G01 X-115.56689 Y53.00653
G01 X-115.41007 Y53.04583
G01 X-115.36880 Y53.05837
G01 X-115.21195 Y53.11448
G01 X-115.15617 Y53.13767
G01 X-114.99936 Y53.21184
G01 X-114.92285 Y53.25286
G01 X-114.79191 Y53.33132
G01 X-114.07886 Y53.33132
G01 X-110.88199 Y56.52819
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.18966 Y57.03111 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.18966 Y57.03111
G01 X-112.18989 Y57.02989
G01 X-112.20282 Y57.01051
G01 X-112.35829 Y56.82111
G01 X-112.39057 Y56.78547
G01 X-114.04157 Y55.13447
G01 X-114.07721 Y55.10219
G01 X-114.26662 Y54.94671
G01 X-114.34650 Y54.89335
G01 X-114.56260 Y54.77785
G01 X-114.65135 Y54.74107
G01 X-114.88584 Y54.66995
G01 X-114.92049 Y54.66307
G01 X-114.90698 Y54.64661
G01 X-114.85361 Y54.56675
G01 X-114.77970 Y54.42845
G01 X-114.74294 Y54.33970
G01 X-114.69740 Y54.18961
G01 X-114.67868 Y54.09541
G01 X-114.66329 Y53.93935
G01 X-114.66329 Y53.84329
G01 X-114.67634 Y53.71085
G01 X-114.67868 Y53.68720
G01 X-114.69740 Y53.59299
G01 X-114.74294 Y53.44293
G01 X-114.77970 Y53.35418
G01 X-114.79191 Y53.33132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-116.07753 Y49.75137 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-116.07753 Y49.75137
G01 X-116.10024 Y49.74685
G01 X-116.25033 Y49.70131
G01 X-116.33908 Y49.66455
G01 X-116.47738 Y49.59064
G01 X-116.55724 Y49.53727
G01 X-116.67847 Y49.43778
G01 X-116.74639 Y49.36986
G01 X-116.84588 Y49.24863
G01 X-116.89925 Y49.16875
G01 X-116.97319 Y49.03044
G01 X-117.00994 Y48.94170
G01 X-117.05546 Y48.79163
G01 X-117.07194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.61194 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.61194 Y48.70880
G01 X-119.59546 Y48.79163
G01 X-119.54994 Y48.94170
G01 X-119.51319 Y49.03044
G01 X-119.43925 Y49.16875
G01 X-119.38588 Y49.24863
G01 X-119.28639 Y49.36986
G01 X-119.21847 Y49.43778
G01 X-119.09724 Y49.53727
G01 X-119.01738 Y49.59064
G01 X-118.87908 Y49.66455
G01 X-118.79033 Y49.70131
G01 X-118.64024 Y49.74685
G01 X-118.61753 Y49.75137
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-118.06638 Y49.75137 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-118.06638 Y49.75137
G01 X-118.04362 Y49.74685
G01 X-117.89356 Y49.70131
G01 X-117.80481 Y49.66455
G01 X-117.66651 Y49.59064
G01 X-117.58662 Y49.53727
G01 X-117.46539 Y49.43778
G01 X-117.39747 Y49.36986
G01 X-117.29798 Y49.24863
G01 X-117.24461 Y49.16875
G01 X-117.17070 Y49.03044
G01 X-117.13392 Y48.94170
G01 X-117.08840 Y48.79163
G01 X-117.07194 Y48.70880
G01 X-117.07194 Y47.47777
G01 X-117.08840 Y47.39501
G01 X-117.13392 Y47.24492
G01 X-117.17070 Y47.15618
G01 X-117.24461 Y47.01787
G01 X-117.29798 Y46.93802
G01 X-117.35193 Y46.87228
G01 X-117.35193 Y46.82339
G01 X-112.98689 Y42.45837
G01 X-112.72913 Y41.83612
G01 X-112.72052 Y41.81374
G01 X-112.68544 Y41.71573
G01 X-112.67452 Y41.67986
G01 X-112.64998 Y41.58184
G01 X-112.64411 Y41.55240
G01 X-112.62956 Y41.45438
G01 X-112.62702 Y41.42868
G01 X-112.62219 Y41.33064
G01 X-112.62192 Y41.31834
G01 X-112.62192 Y40.27232
G01 X-112.62161 Y40.26005
G01 X-112.61437 Y40.11304
G01 X-112.61178 Y40.08680
G01 X-112.58996 Y39.93976
G01 X-112.58371 Y39.90844
G01 X-112.54691 Y39.76142
G01 X-112.53462 Y39.72101
G01 X-112.48201 Y39.57397
G01 X-112.47178 Y39.54748
G01 X-112.25689 Y39.02868
G01 X-111.70457 Y38.47634
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.04440 Y38.31484 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.04440 Y38.31484
G01 X-112.04409 Y38.31614
G01 X-112.07569 Y38.39244
G01 X-112.14963 Y38.53074
G01 X-112.20299 Y38.61063
G01 X-112.25692 Y38.67634
G01 X-112.25689 Y39.02868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-114.51691 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-114.51691 Y38.07072
G01 X-114.53342 Y38.15363
G01 X-114.57893 Y38.30369
G01 X-114.61569 Y38.39244
G01 X-114.68963 Y38.53074
G01 X-114.74299 Y38.61063
G01 X-114.76192 Y38.63369
G01 X-114.79692 Y38.67634
G01 X-114.79692 Y38.82996
G01 X-114.72971 Y38.86590
G01 X-114.65546 Y38.92683
G01 X-114.59450 Y39.00108
G01 X-114.54924 Y39.08581
G01 X-114.52135 Y39.17771
G01 X-114.51193 Y39.27331
G01 X-114.51193 Y41.18327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.98689 Y42.45837 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.98689 Y42.45837
G01 X-112.98691 Y43.52469
G01 X-115.86986 Y46.40764
G01 X-116.00603 Y46.42105
G01 X-116.10024 Y46.43980
G01 X-116.25033 Y46.48531
G01 X-116.33908 Y46.52207
G01 X-116.39496 Y46.55194
G01 X-116.47738 Y46.59601
G01 X-116.55724 Y46.64937
G01 X-116.67847 Y46.74886
G01 X-116.74639 Y46.81678
G01 X-116.84588 Y46.93802
G01 X-116.89925 Y47.01787
G01 X-116.97319 Y47.15618
G01 X-117.00994 Y47.24492
G01 X-117.05546 Y47.39501
G01 X-117.07194 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-115.52638 Y49.75137 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-115.52638 Y49.75137
G01 X-115.52607 Y49.75135
G01 X-113.83642 Y49.75135
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-112.28267 Y50.05584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-112.28267 Y50.05584
G01 X-112.33710 Y50.04779
G01 X-112.34556 Y50.04649
G01 X-112.39276 Y50.03910
G01 X-112.42849 Y50.03275
G01 X-112.46962 Y50.02457
G01 X-112.54274 Y50.01363
G01 X-112.59987 Y50.00801
G01 X-112.61653 Y50.00616
G01 X-112.65999 Y50.00072
G01 X-112.67490 Y49.99907
G01 X-112.74452 Y49.99221
G01 X-112.79667 Y49.98962
G01 X-112.81869 Y49.98962
G01 X-112.86542 Y49.98749
G01 X-112.86890 Y49.98718
G01 X-112.89044 Y49.98566
G01 X-113.02570 Y49.97903
G01 X-113.07764 Y49.97390
G01 X-113.23446 Y49.95063
G01 X-113.29260 Y49.93905
G01 X-113.44942 Y49.89976
G01 X-113.51838 Y49.87878
G01 X-113.67523 Y49.82267
G01 X-113.76072 Y49.78716
G01 X-113.83642 Y49.75135
G01 X-113.88788 Y49.68863
G01 X-113.94124 Y49.60875
G01 X-114.01518 Y49.47045
G01 X-114.05194 Y49.38170
G01 X-114.09748 Y49.23164
G01 X-114.11620 Y49.13740
G01 X-114.13159 Y48.98134
G01 X-114.13159 Y48.88528
G01 X-114.11620 Y48.72922
G01 X-114.09748 Y48.63499
G01 X-114.05194 Y48.48493
G01 X-114.01518 Y48.39618
G01 X-113.94124 Y48.25788
G01 X-113.88788 Y48.17799
G01 X-113.78841 Y48.05678
G01 X-113.72047 Y47.98884
G01 X-113.59926 Y47.88937
G01 X-113.51937 Y47.83601
G01 X-113.38107 Y47.76207
G01 X-113.29232 Y47.72531
G01 X-113.14226 Y47.67977
G01 X-113.04803 Y47.66105
G01 X-112.89197 Y47.64566
G01 X-112.79591 Y47.64566
G01 X-112.74884 Y47.65031
G01 X-111.04468 Y45.94615
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-111.42972 Y45.47472 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-111.42972 Y45.47472
G01 X-114.51627 Y48.56128
G01 X-114.52966 Y48.69742
G01 X-114.54840 Y48.79163
G01 X-114.59392 Y48.94170
G01 X-114.61033 Y48.98127
G01 X-114.63070 Y49.03044
G01 X-114.70461 Y49.16875
G01 X-114.75798 Y49.24863
G01 X-114.85747 Y49.36986
G01 X-114.92539 Y49.43778
G01 X-115.04662 Y49.53727
G01 X-115.12651 Y49.59064
G01 X-115.26481 Y49.66455
G01 X-115.35356 Y49.70131
G01 X-115.50362 Y49.74685
G01 X-115.52638 Y49.75137
G01 X-115.59854 Y49.75848
G01 X-115.75539 Y49.76618
G01 X-115.84850 Y49.76618
G01 X-116.00530 Y49.75848
G01 X-116.07753 Y49.75137
G01 X-118.06607 Y49.75135
G01 X-118.06638 Y49.75137
G01 X-118.13854 Y49.75848
G01 X-118.29539 Y49.76618
G01 X-118.38850 Y49.76618
G01 X-118.54530 Y49.75848
G01 X-118.61753 Y49.75137
G01 X-119.72797 Y49.75135
G01 X-120.02525 Y49.45406
G01 X-120.00539 Y49.43778
G01 X-119.93747 Y49.36986
G01 X-119.83798 Y49.24863
G01 X-119.78461 Y49.16875
G01 X-119.71070 Y49.03044
G01 X-119.67392 Y48.94170
G01 X-119.62840 Y48.79163
G01 X-119.61194 Y48.70880
G01 X-119.61194 Y47.47777
G01 X-119.62840 Y47.39501
G01 X-119.67392 Y47.24492
G01 X-119.69757 Y47.18788
G01 X-119.73008 Y47.16651
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.51471 Y47.15986 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.51471 Y47.15986
G01 X-119.54994 Y47.24492
G01 X-119.59546 Y47.39501
G01 X-119.61194 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-121.99921 Y47.05539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-121.99921 Y47.05539
G01 X-122.05319 Y47.15618
G01 X-122.08994 Y47.24492
G01 X-122.13546 Y47.39501
G01 X-122.15192 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.15192 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.15192 Y48.70880
G01 X-122.16840 Y48.79163
G01 X-122.21392 Y48.94170
G01 X-122.25070 Y49.03044
G01 X-122.32461 Y49.16875
G01 X-122.37798 Y49.24863
G01 X-122.47747 Y49.36986
G01 X-122.54539 Y49.43778
G01 X-122.66662 Y49.53727
G01 X-122.74651 Y49.59064
G01 X-122.88481 Y49.66455
G01 X-122.97356 Y49.70131
G01 X-123.12362 Y49.74685
G01 X-123.21783 Y49.76557
G01 X-123.37391 Y49.78096
G01 X-123.46998 Y49.78096
G01 X-123.62603 Y49.76557
G01 X-123.72024 Y49.74685
G01 X-123.87033 Y49.70131
G01 X-123.95908 Y49.66455
G01 X-124.09738 Y49.59064
G01 X-124.17724 Y49.53727
G01 X-124.29847 Y49.43778
G01 X-124.36639 Y49.36986
G01 X-124.46588 Y49.24863
G01 X-124.51925 Y49.16875
G01 X-124.59319 Y49.03044
G01 X-124.62994 Y48.94170
G01 X-124.67546 Y48.79163
G01 X-124.69194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-124.69194 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-124.69194 Y47.47777
G01 X-124.70840 Y47.39501
G01 X-124.75392 Y47.24492
G01 X-124.79070 Y47.15618
G01 X-124.84490 Y47.05475
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-127.23192 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-127.23192 Y48.70880
G01 X-127.21546 Y48.79163
G01 X-127.16994 Y48.94170
G01 X-127.13319 Y49.03044
G01 X-127.05925 Y49.16875
G01 X-127.00588 Y49.24863
G01 X-126.90639 Y49.36986
G01 X-126.83847 Y49.43778
G01 X-126.80192 Y49.46775
G01 X-126.80192 Y49.91231
G01 X-126.79956 Y49.96034
G01 X-126.79285 Y50.02864
G01 X-126.77411 Y50.12285
G01 X-126.75420 Y50.18851
G01 X-126.71744 Y50.27725
G01 X-126.68508 Y50.33776
G01 X-126.63172 Y50.41761
G01 X-126.58821 Y50.47065
G01 X-126.55590 Y50.50628
G01 X-125.41084 Y51.65134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-121.15385 Y50.70133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-121.15385 Y50.70133
G01 X-123.98499 Y50.70133
G01 X-125.12194 Y49.56438
G01 X-125.12194 Y49.46775
G01 X-125.08539 Y49.43778
G01 X-125.01747 Y49.36986
G01 X-124.91798 Y49.24863
G01 X-124.86461 Y49.16875
G01 X-124.79070 Y49.03044
G01 X-124.75392 Y48.94170
G01 X-124.70840 Y48.79163
G01 X-124.69194 Y48.70880
G01 X-124.69194 Y47.47777
G01 X-124.67546 Y47.39501
G01 X-124.62994 Y47.24492
G01 X-124.59319 Y47.15618
G01 X-124.51925 Y47.01787
G01 X-124.49654 Y46.98386
G01 X-124.46588 Y46.93802
G01 X-124.36639 Y46.81678
G01 X-124.29847 Y46.74886
G01 X-124.26192 Y46.71884
G01 X-124.26192 Y46.68666
G01 X-124.28753 Y46.70632
G01 X-124.43165 Y46.85046
G01 X-124.43347 Y46.84863
G01 X-124.48747 Y46.90261
G01 X-124.54866 Y46.94955
G01 X-124.62065 Y46.99539
G01 X-124.69949 Y47.02806
G01 X-124.78283 Y47.04655
G01 X-124.84490 Y47.05475
G01 X-124.86060 Y47.04670
G01 X-124.88966 Y47.03123
G01 X-124.97457 Y46.98447
G01 X-125.06530 Y46.92681
G01 X-125.11089 Y46.89346
G01 X-125.12656 Y46.88231
G01 X-125.17010 Y46.85214
G01 X-125.19982 Y46.83040
G01 X-125.29486 Y46.75697
G01 X-125.35146 Y46.71749
G01 X-125.36050 Y46.71185
G01 X-125.49011 Y46.64419
G01 X-125.52108 Y46.62900
G01 X-125.55369 Y46.61785
G01 X-125.69321 Y46.57403
G01 X-125.70355 Y46.57165
G01 X-125.77147 Y46.55953
G01 X-125.87167 Y46.54665
G01 X-125.92753 Y46.54391
G01 X-125.99634 Y46.54391
G01 X-126.05217 Y46.54665
G01 X-126.15237 Y46.55953
G01 X-126.22026 Y46.57165
G01 X-126.23065 Y46.57403
G01 X-126.37015 Y46.61785
G01 X-126.40279 Y46.62900
G01 X-126.43377 Y46.64421
G01 X-126.56337 Y46.71185
G01 X-126.57241 Y46.71752
G01 X-126.62897 Y46.75691
G01 X-126.70891 Y46.81869
G01 X-126.75033 Y46.85623
G01 X-126.79903 Y46.90492
G01 X-126.84038 Y46.95056
G01 X-126.88622 Y47.00065
G01 X-126.90583 Y47.02013
G01 X-126.94015 Y47.05663
G01 X-126.95503 Y47.07360
G01 X-127.07667 Y47.18643
G01 X-127.10243 Y47.20609
G01 X-127.15534 Y47.24929
G01 X-127.17147 Y47.26334
G01 X-127.17665 Y47.26758
G01 X-127.17688 Y47.26776
G01 X-127.21546 Y47.39501
G01 X-127.23192 Y47.47777
G01 X-127.23192 Y48.70880
G01 X-127.24840 Y48.79163
G01 X-127.29392 Y48.94170
G01 X-127.33070 Y49.03044
G01 X-127.40461 Y49.16875
G01 X-127.45798 Y49.24863
G01 X-127.55747 Y49.36986
G01 X-127.62539 Y49.43778
G01 X-127.66194 Y49.46775
G01 X-127.66194 Y50.70738
G01 X-126.71798 Y51.65134
G01 X-125.41084 Y51.65134
G01 X-124.72641 Y51.93483
G01 X-124.70655 Y51.94250
G01 X-124.63794 Y51.96706
G01 X-124.60475 Y51.97715
G01 X-124.53614 Y51.99434
G01 X-124.50790 Y51.99998
G01 X-124.43929 Y52.01014
G01 X-124.41384 Y52.01266
G01 X-124.34523 Y52.01604
G01 X-124.33292 Y52.01634
G01 X-113.73090 Y52.01634
G01 X-113.71864 Y52.01664
G01 X-113.65001 Y52.02002
G01 X-113.62453 Y52.02254
G01 X-113.55592 Y52.03270
G01 X-113.52768 Y52.03834
G01 X-113.49334 Y52.04695
G01 X-113.46550 Y52.06757
G01 X-113.44279 Y52.08622
G01 X-113.39189 Y52.13234
G01 X-113.38165 Y52.14210
G01 X-99.79517 Y65.72858
G01 X-99.78493 Y65.73833
G01 X-99.73403 Y65.78446
G01 X-99.71132 Y65.80310
G01 X-99.68349 Y65.82373
G01 X-99.64914 Y65.83234
G01 X-99.62090 Y65.83798
G01 X-99.55229 Y65.84814
G01 X-99.52684 Y65.85065
G01 X-99.45824 Y65.85403
G01 X-99.44594 Y65.85434
G01 X-95.82891 Y65.85434
G01 X-95.81664 Y65.85464
G01 X-95.74801 Y65.85802
G01 X-95.72253 Y65.86053
G01 X-95.65393 Y65.87069
G01 X-95.62568 Y65.87633
G01 X-95.55708 Y65.89353
G01 X-95.52388 Y65.90361
G01 X-95.45527 Y65.92817
G01 X-95.43541 Y65.93584
G01 X-94.75098 Y66.21933
G01 X-94.40364 Y66.21931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.75098 Y66.21933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.75098 Y66.21933
G01 X-94.50153 Y66.46879
G01 X-94.48098 Y66.54024
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-91.65711 Y71.78907 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-91.65711 Y71.78907
G01 X-91.68033 Y71.81229
G01 X-91.77291 Y71.80317
G01 X-91.86897 Y71.80317
G01 X-91.96153 Y71.81229
G01 X-91.98475 Y71.78907
G01 X-91.82092 Y71.77734
G01 X-91.65711 Y71.78907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.86547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.86547 Y74.41083
G01 X-88.81343 Y74.39501
G01 X-88.72468 Y74.35826
G01 X-88.57772 Y74.27969
G01 X-88.49786 Y74.22633
G01 X-88.36906 Y74.12064
G01 X-88.30111 Y74.05269
G01 X-88.19542 Y73.92389
G01 X-88.14206 Y73.84403
G01 X-88.06349 Y73.69707
G01 X-88.02674 Y73.60832
G01 X-88.01092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-88.01092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-88.01092 Y72.72534
G01 X-88.02674 Y72.67330
G01 X-88.03825 Y72.64543
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-87.98282 Y72.64358 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-87.98282 Y72.64358
G01 X-87.99514 Y72.67330
G01 X-88.01092 Y72.72534
G01 X-88.01092 Y73.55620
G01 X-87.99514 Y73.60832
G01 X-87.95839 Y73.69707
G01 X-87.87983 Y73.84403
G01 X-87.82646 Y73.92389
G01 X-87.72075 Y74.05269
G01 X-87.70307 Y74.07040
G01 X-87.65283 Y74.12064
G01 X-87.52402 Y74.22633
G01 X-87.44417 Y74.27969
G01 X-87.35717 Y74.32620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-86.12466 Y74.32618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-86.12466 Y74.32618
G01 X-86.03772 Y74.27969
G01 X-85.95786 Y74.22633
G01 X-85.82906 Y74.12064
G01 X-85.76111 Y74.05269
G01 X-85.65542 Y73.92389
G01 X-85.60206 Y73.84403
G01 X-85.52349 Y73.69707
G01 X-85.48674 Y73.60832
G01 X-85.47092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.47092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.47092 Y72.72534
G01 X-85.48674 Y72.67330
G01 X-85.49825 Y72.64543
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.44282 Y72.64358 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.44282 Y72.64358
G01 X-85.45514 Y72.67330
G01 X-85.47092 Y72.72534
G01 X-85.47092 Y73.55620
G01 X-85.45514 Y73.60832
G01 X-85.41839 Y73.69707
G01 X-85.33983 Y73.84403
G01 X-85.28646 Y73.92389
G01 X-85.18075 Y74.05269
G01 X-85.11283 Y74.12064
G01 X-84.98402 Y74.22633
G01 X-84.90417 Y74.27969
G01 X-84.75720 Y74.35826
G01 X-84.66845 Y74.39501
G01 X-84.61633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.78547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.78547 Y74.41083
G01 X-83.73343 Y74.39501
G01 X-83.64468 Y74.35826
G01 X-83.49772 Y74.27969
G01 X-83.41786 Y74.22633
G01 X-83.28906 Y74.12064
G01 X-83.22111 Y74.05269
G01 X-83.11542 Y73.92389
G01 X-83.06206 Y73.84403
G01 X-82.98349 Y73.69707
G01 X-82.94674 Y73.60832
G01 X-82.93092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.93092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.93092 Y72.72534
G01 X-82.94674 Y72.67330
G01 X-82.95825 Y72.64543
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.38628 Y75.06450 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.38628 Y75.06450
G01 X-85.47732 Y74.89427
G01 X-85.53068 Y74.81439
G01 X-85.65504 Y74.66285
G01 X-85.72296 Y74.59493
G01 X-85.76525 Y74.56024
G01 X-85.87450 Y74.47057
G01 X-85.95438 Y74.41721
G01 X-86.12466 Y74.32618
G01 X-86.12796 Y74.32618
G01 X-86.20056 Y74.32864
G01 X-86.22893 Y74.33060
G01 X-86.29222 Y74.33283
G01 X-86.43446 Y74.33283
G01 X-86.46614 Y74.33347
G01 X-86.50988 Y74.33524
G01 X-86.53949 Y74.33583
G01 X-86.94234 Y74.33583
G01 X-86.97195 Y74.33524
G01 X-87.01567 Y74.33347
G01 X-87.04737 Y74.33283
G01 X-87.18961 Y74.33283
G01 X-87.25290 Y74.33062
G01 X-87.28133 Y74.32864
G01 X-87.35384 Y74.32620
G01 X-87.35717 Y74.32620
G01 X-87.52748 Y74.41721
G01 X-87.60736 Y74.47057
G01 X-87.75890 Y74.59493
G01 X-87.82682 Y74.66285
G01 X-87.86151 Y74.70514
G01 X-87.95117 Y74.81439
G01 X-88.00454 Y74.89427
G01 X-88.09555 Y75.06455
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-89.69633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-89.69633 Y74.41083
G01 X-89.74845 Y74.42661
G01 X-89.83720 Y74.46336
G01 X-89.98417 Y74.54192
G01 X-90.06402 Y74.59529
G01 X-90.19283 Y74.70100
G01 X-90.26075 Y74.76892
G01 X-90.30593 Y74.82397
G01 X-90.36646 Y74.89773
G01 X-90.41983 Y74.97758
G01 X-90.49839 Y75.12455
G01 X-90.53514 Y75.21330
G01 X-90.55092 Y75.26534
G01 X-90.55092 Y76.09620
G01 X-90.53514 Y76.14832
G01 X-90.52358 Y76.17618
G01 X-90.52358 Y76.17621
G01 X-90.46316 Y76.21822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.57906 Y76.17809 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.57906 Y76.17809
G01 X-90.56674 Y76.14832
G01 X-90.55092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.55092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.55092 Y75.26534
G01 X-90.56674 Y75.21330
G01 X-90.60349 Y75.12455
G01 X-90.68206 Y74.97758
G01 X-90.73542 Y74.89773
G01 X-90.84111 Y74.76892
G01 X-90.90906 Y74.70100
G01 X-90.96410 Y74.65582
G01 X-91.03786 Y74.59529
G01 X-91.11772 Y74.54192
G01 X-91.26468 Y74.46336
G01 X-91.35343 Y74.42661
G01 X-91.40547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-90.55092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-90.55092 Y73.55620
G01 X-90.56674 Y73.60832
G01 X-90.60349 Y73.69707
G01 X-90.68206 Y73.84403
G01 X-90.73542 Y73.92389
G01 X-90.84111 Y74.05269
G01 X-90.90906 Y74.12064
G01 X-91.03786 Y74.22633
G01 X-91.11772 Y74.27969
G01 X-91.26468 Y74.35826
G01 X-91.35343 Y74.39501
G01 X-91.40547 Y74.41083
G01 X-92.23633 Y74.41083
G01 X-92.28845 Y74.42661
G01 X-92.37720 Y74.46336
G01 X-92.52417 Y74.54192
G01 X-92.60402 Y74.59529
G01 X-92.73283 Y74.70100
G01 X-92.80075 Y74.76892
G01 X-92.84593 Y74.82397
G01 X-92.90646 Y74.89773
G01 X-92.95983 Y74.97758
G01 X-93.03839 Y75.12455
G01 X-93.07514 Y75.21330
G01 X-93.09092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.94547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.94547 Y74.41083
G01 X-93.89343 Y74.39501
G01 X-93.80468 Y74.35826
G01 X-93.65772 Y74.27969
G01 X-93.57786 Y74.22633
G01 X-93.44906 Y74.12064
G01 X-93.38111 Y74.05269
G01 X-93.27542 Y73.92389
G01 X-93.22206 Y73.84403
G01 X-93.14349 Y73.69707
G01 X-93.10674 Y73.60832
G01 X-93.09092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-92.23633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-92.23633 Y74.41083
G01 X-92.28845 Y74.39501
G01 X-92.37720 Y74.35826
G01 X-92.52417 Y74.27969
G01 X-92.60402 Y74.22633
G01 X-92.73283 Y74.12064
G01 X-92.80075 Y74.05269
G01 X-92.90646 Y73.92389
G01 X-92.95983 Y73.84403
G01 X-93.03839 Y73.69707
G01 X-93.07514 Y73.60832
G01 X-93.09092 Y73.55620
G01 X-93.09092 Y72.97932
G01 X-93.11228 Y72.93413
G01 X-93.15134 Y72.86095
G01 X-93.18695 Y72.80157
G01 X-93.18888 Y72.79829
G01 X-93.23966 Y72.71361
G01 X-93.27783 Y72.65641
G01 X-93.37819 Y72.52110
G01 X-93.41692 Y72.47386
G01 X-93.52896 Y72.35026
G01 X-93.57037 Y72.30886
G01 X-93.69396 Y72.19682
G01 X-93.74121 Y72.15808
G01 X-93.87651 Y72.05773
G01 X-93.93366 Y72.01958
G01 X-93.99005 Y71.99941
G01 X-94.09325 Y71.97139
G01 X-94.16056 Y71.95661
G01 X-94.17303 Y71.95453
G01 X-94.32647 Y71.94094
G01 X-94.36094 Y71.93873
G01 X-94.39538 Y71.94094
G01 X-94.54882 Y71.95453
G01 X-94.56127 Y71.95661
G01 X-94.62858 Y71.97139
G01 X-94.73181 Y71.99941
G01 X-94.78809 Y72.01955
G01 X-94.85167 Y72.04587
G01 X-94.90580 Y72.07147
G01 X-94.99853 Y72.12461
G01 X-95.05662 Y72.16179
G01 X-95.06691 Y72.16911
G01 X-95.18502 Y72.26801
G01 X-95.21095 Y72.29082
G01 X-95.23374 Y72.31673
G01 X-95.25012 Y72.33629
G01 X-95.31438 Y72.40350
G01 X-95.35037 Y72.43657
G01 X-95.37143 Y72.45666
G01 X-95.40392 Y72.48892
G01 X-95.54519 Y72.60235
G01 X-95.54572 Y72.60268
G01 X-95.60282 Y72.64358
G01 X-95.60447 Y72.64475
G01 X-95.61966 Y72.64594
G01 X-95.65802 Y72.64561
G01 X-95.65825 Y72.64543
G01 X-95.65827 Y72.64543
G01 X-95.71870 Y72.60342
G01 X-95.82827 Y72.51437
G01 X-95.85601 Y72.48788
G01 X-95.88748 Y72.45938
G01 X-95.91280 Y72.43766
G01 X-95.97788 Y72.37444
G01 X-95.99358 Y72.35712
G01 X-96.01176 Y72.33626
G01 X-96.02812 Y72.31673
G01 X-96.05090 Y72.29082
G01 X-96.07684 Y72.26801
G01 X-96.19495 Y72.16911
G01 X-96.20523 Y72.16179
G01 X-96.26332 Y72.12461
G01 X-96.35606 Y72.07147
G01 X-96.41019 Y72.04587
G01 X-96.47374 Y72.01955
G01 X-96.53005 Y71.99941
G01 X-96.63325 Y71.97139
G01 X-96.70056 Y71.95661
G01 X-96.71303 Y71.95453
G01 X-96.86647 Y71.94094
G01 X-96.90094 Y71.93873
G01 X-96.93538 Y71.94094
G01 X-97.08882 Y71.95453
G01 X-97.10127 Y71.95661
G01 X-97.16858 Y71.97139
G01 X-97.27181 Y71.99941
G01 X-97.32809 Y72.01955
G01 X-97.39167 Y72.04587
G01 X-97.44580 Y72.07147
G01 X-97.53853 Y72.12461
G01 X-97.59662 Y72.16179
G01 X-97.60691 Y72.16911
G01 X-97.72502 Y72.26801
G01 X-97.75095 Y72.29082
G01 X-97.77374 Y72.31673
G01 X-97.79012 Y72.33629
G01 X-97.85438 Y72.40350
G01 X-97.89037 Y72.43657
G01 X-97.91143 Y72.45666
G01 X-97.94392 Y72.48892
G01 X-98.08519 Y72.60235
G01 X-98.08572 Y72.60268
G01 X-98.14282 Y72.64358
G01 X-98.14447 Y72.64475
G01 X-98.15966 Y72.64594
G01 X-98.19802 Y72.64561
G01 X-98.19825 Y72.64543
G01 X-98.19827 Y72.64543
G01 X-98.25870 Y72.60342
G01 X-98.36827 Y72.51437
G01 X-98.39601 Y72.48788
G01 X-98.42748 Y72.45938
G01 X-98.45280 Y72.43766
G01 X-98.51788 Y72.37444
G01 X-98.53358 Y72.35712
G01 X-98.55176 Y72.33626
G01 X-98.56812 Y72.31673
G01 X-98.59090 Y72.29082
G01 X-98.61684 Y72.26801
G01 X-98.73495 Y72.16911
G01 X-98.74523 Y72.16179
G01 X-98.80332 Y72.12461
G01 X-98.89606 Y72.07147
G01 X-98.95019 Y72.04587
G01 X-99.01374 Y72.01955
G01 X-99.07005 Y71.99941
G01 X-99.17325 Y71.97139
G01 X-99.24056 Y71.95661
G01 X-99.25303 Y71.95453
G01 X-99.40647 Y71.94094
G01 X-99.44094 Y71.93873
G01 X-99.47538 Y71.94094
G01 X-99.62882 Y71.95453
G01 X-99.64127 Y71.95661
G01 X-99.70858 Y71.97139
G01 X-99.81181 Y71.99941
G01 X-99.86809 Y72.01955
G01 X-99.93167 Y72.04587
G01 X-99.98580 Y72.07147
G01 X-100.07853 Y72.12461
G01 X-100.13662 Y72.16179
G01 X-100.14254 Y72.16601
G01 X-100.14693 Y72.16913
G01 X-100.20850 Y72.22069
G01 X-100.26746 Y72.26504
G01 X-100.28333 Y72.27571
G01 X-100.32595 Y72.30670
G01 X-100.34635 Y72.32267
G01 X-100.47122 Y72.40304
G01 X-100.54284 Y72.44073
G01 X-100.55841 Y72.44909
G01 X-100.59735 Y72.47040
G01 X-100.64089 Y72.55186
G01 X-100.65021 Y72.58897
G01 X-100.66862 Y72.68137
G01 X-100.69334 Y72.84802
G01 X-100.70172 Y72.93294
G01 X-100.70990 Y73.09956
G01 X-100.70990 Y73.18208
G01 X-100.70172 Y73.34873
G01 X-100.69334 Y73.43367
G01 X-100.66862 Y73.60029
G01 X-100.65021 Y73.69267
G01 X-100.64091 Y73.72976
G01 X-100.57983 Y73.84403
G01 X-100.52646 Y73.92389
G01 X-100.42075 Y74.05269
G01 X-100.35283 Y74.12064
G01 X-100.22402 Y74.22633
G01 X-100.14417 Y74.27969
G01 X-99.99720 Y74.35826
G01 X-99.90845 Y74.39501
G01 X-99.85633 Y74.41083
G01 X-99.02547 Y74.41083
G01 X-98.97343 Y74.42661
G01 X-98.88468 Y74.46336
G01 X-98.73772 Y74.54192
G01 X-98.65786 Y74.59529
G01 X-98.58410 Y74.65582
G01 X-98.52906 Y74.70100
G01 X-98.46111 Y74.76892
G01 X-98.35542 Y74.89773
G01 X-98.30206 Y74.97758
G01 X-98.25555 Y75.06455
G01 X-98.25555 Y75.06791
G01 X-98.25311 Y75.14042
G01 X-98.25113 Y75.16885
G01 X-98.24892 Y75.23214
G01 X-98.24892 Y75.37438
G01 X-98.24828 Y75.40608
G01 X-98.24651 Y75.44980
G01 X-98.24592 Y75.47941
G01 X-98.24592 Y75.68081
G01 X-98.24676 Y75.71472
G01 X-98.25494 Y75.88137
G01 X-98.26187 Y75.95147
G01 X-98.27379 Y76.03174
G01 X-98.30178 Y76.08518
G01 X-98.31349 Y76.10994
G01 X-98.32746 Y76.13791
G01 X-98.34539 Y76.17189
G01 X-98.35910 Y76.19932
G01 X-98.37155 Y76.22566
G01 X-98.42471 Y76.31843
G01 X-98.46190 Y76.37651
G01 X-98.46926 Y76.38685
G01 X-98.56810 Y76.50494
G01 X-98.59090 Y76.53085
G01 X-98.61681 Y76.55365
G01 X-98.73495 Y76.65254
G01 X-98.74523 Y76.65985
G01 X-98.80332 Y76.69704
G01 X-98.89296 Y76.74840
G01 X-98.95633 Y76.76427
G01 X-99.02123 Y76.77723
G01 X-99.18786 Y76.80194
G01 X-99.24622 Y76.80771
G01 X-99.41285 Y76.81588
G01 X-99.46901 Y76.81588
G01 X-99.63563 Y76.80771
G01 X-99.69395 Y76.80194
G01 X-99.86060 Y76.77723
G01 X-99.92552 Y76.76427
G01 X-99.98889 Y76.74840
G01 X-100.07853 Y76.69704
G01 X-100.13662 Y76.65985
G01 X-100.14691 Y76.65254
G01 X-100.26502 Y76.55363
G01 X-100.29093 Y76.53085
G01 X-100.31374 Y76.50491
G01 X-100.33007 Y76.48540
G01 X-100.34825 Y76.46455
G01 X-100.36398 Y76.44720
G01 X-100.42905 Y76.38398
G01 X-100.45438 Y76.36227
G01 X-100.48585 Y76.33377
G01 X-100.51358 Y76.30727
G01 X-100.62316 Y76.21822
G01 X-100.68358 Y76.17618
G01 X-100.68384 Y76.17603
G01 X-100.72219 Y76.17570
G01 X-100.73738 Y76.17690
G01 X-100.73906 Y76.17809
G01 X-100.79613 Y76.21896
G01 X-100.79667 Y76.21929
G01 X-100.93794 Y76.33273
G01 X-100.97048 Y76.36503
G01 X-100.99146 Y76.38507
G01 X-101.02750 Y76.41820
G01 X-101.09176 Y76.48540
G01 X-101.10810 Y76.50494
G01 X-101.13090 Y76.53082
G01 X-101.15681 Y76.55365
G01 X-101.27495 Y76.65254
G01 X-101.28523 Y76.65985
G01 X-101.34332 Y76.69704
G01 X-101.43296 Y76.74840
G01 X-101.49633 Y76.76427
G01 X-101.56123 Y76.77723
G01 X-101.72786 Y76.80194
G01 X-101.78622 Y76.80771
G01 X-101.95285 Y76.81588
G01 X-102.00901 Y76.81588
G01 X-102.17563 Y76.80771
G01 X-102.23395 Y76.80194
G01 X-102.40060 Y76.77723
G01 X-102.46552 Y76.76427
G01 X-102.52889 Y76.74840
G01 X-102.61853 Y76.69704
G01 X-102.67662 Y76.65985
G01 X-102.68691 Y76.65254
G01 X-102.80502 Y76.55363
G01 X-102.83093 Y76.53085
G01 X-102.85374 Y76.50491
G01 X-102.95264 Y76.38680
G01 X-102.95996 Y76.37651
G01 X-102.99714 Y76.31843
G01 X-103.05028 Y76.22569
G01 X-103.07588 Y76.17156
G01 X-103.10220 Y76.10801
G01 X-103.12234 Y76.05175
G01 X-103.15036 Y75.94850
G01 X-103.16514 Y75.88119
G01 X-103.16722 Y75.86872
G01 X-103.18081 Y75.71528
G01 X-103.18302 Y75.68081
G01 X-103.18081 Y75.64637
G01 X-103.16722 Y75.49292
G01 X-103.16514 Y75.48048
G01 X-103.15036 Y75.41317
G01 X-103.12234 Y75.30994
G01 X-103.10220 Y75.25366
G01 X-103.07588 Y75.19008
G01 X-103.05028 Y75.13595
G01 X-102.99714 Y75.04322
G01 X-102.95996 Y74.98513
G01 X-102.95262 Y74.97482
G01 X-102.90098 Y74.91314
G01 X-102.89892 Y74.91066
G01 X-102.89681 Y74.90814
G01 X-102.85648 Y74.85450
G01 X-102.83916 Y74.82907
G01 X-102.81510 Y74.79572
G01 X-102.79209 Y74.76565
G01 X-102.71861 Y74.65066
G01 X-102.67268 Y74.56430
G01 X-102.67240 Y74.56379
G01 X-102.65148 Y74.52445
G01 X-102.65551 Y74.48503
G01 X-102.65739 Y74.47512
G01 X-102.67606 Y74.45709
G01 X-102.75125 Y74.38675
G01 X-102.79166 Y74.35114
G01 X-102.83667 Y74.31386
G01 X-102.85234 Y74.30052
G01 X-102.89021 Y74.26738
G01 X-102.89646 Y74.26186
G01 X-102.94276 Y74.22044
G01 X-102.96636 Y74.20024
G01 X-102.98025 Y74.18889
G01 X-103.00647 Y74.16636
G01 X-103.02900 Y74.14015
G01 X-103.06003 Y74.10222
G01 X-103.08343 Y74.07197
G01 X-103.09836 Y74.04512
G01 X-103.12125 Y74.00182
G01 X-103.13976 Y73.96405
G01 X-103.14787 Y73.93837
G01 X-103.16174 Y73.89135
G01 X-103.17372 Y73.84482
G01 X-103.17599 Y73.82402
G01 X-103.18007 Y73.78038
G01 X-103.18033 Y73.77522
G01 X-103.18117 Y73.74081
G01 X-103.18117 Y72.54081
G01 X-103.18033 Y72.50642
G01 X-103.18007 Y72.50126
G01 X-103.17599 Y72.45762
G01 X-103.17372 Y72.43682
G01 X-103.16171 Y72.39024
G01 X-103.14787 Y72.34325
G01 X-103.13976 Y72.31759
G01 X-103.12130 Y72.27993
G01 X-103.09839 Y72.23659
G01 X-103.08343 Y72.20967
G01 X-103.06003 Y72.17942
G01 X-103.02900 Y72.14150
G01 X-103.00647 Y72.11528
G01 X-102.98025 Y72.09275
G01 X-102.94233 Y72.06172
G01 X-102.91208 Y72.03835
G01 X-102.88516 Y72.02336
G01 X-102.84182 Y72.00048
G01 X-102.80415 Y71.98201
G01 X-102.77850 Y71.97391
G01 X-102.73151 Y71.96004
G01 X-102.68490 Y71.94802
G01 X-102.66412 Y71.94576
G01 X-102.62046 Y71.94167
G01 X-102.61533 Y71.94142
G01 X-102.58094 Y71.94058
G01 X-101.38094 Y71.94058
G01 X-101.34652 Y71.94142
G01 X-101.34137 Y71.94167
G01 X-101.29773 Y71.94576
G01 X-101.27695 Y71.94802
G01 X-101.23040 Y71.96004
G01 X-101.18338 Y71.97388
G01 X-101.15770 Y71.98198
G01 X-101.11993 Y72.00050
G01 X-101.07662 Y72.02339
G01 X-101.04978 Y72.03835
G01 X-101.01953 Y72.06172
G01 X-100.98160 Y72.09275
G01 X-100.95539 Y72.11528
G01 X-100.93286 Y72.14150
G01 X-100.92151 Y72.15539
G01 X-100.91892 Y72.15854
G01 X-100.91673 Y72.16116
G01 X-100.90139 Y72.17906
G01 X-100.85463 Y72.23187
G01 X-100.82100 Y72.26946
G01 X-100.79971 Y72.29430
G01 X-100.77050 Y72.32984
G01 X-100.73512 Y72.37033
G01 X-100.66514 Y72.44574
G01 X-100.64714 Y72.46428
G01 X-100.64599 Y72.46547
G01 X-100.64330 Y72.49278
G01 X-100.64094 Y72.54081
G01 X-100.64089 Y72.55186
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.59735 Y72.47040 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.59735 Y72.47040
G01 X-100.62240 Y72.46842
G01 X-100.64714 Y72.46428
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.64091 Y73.72976 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.64091 Y73.72976
G01 X-100.64094 Y73.74081
G01 X-100.64330 Y73.78884
G01 X-100.64810 Y73.83761
G01 X-100.66685 Y73.93182
G01 X-100.68107 Y73.97873
G01 X-100.71782 Y74.06748
G01 X-100.74094 Y74.11068
G01 X-100.79430 Y74.19057
G01 X-100.80594 Y74.20476
G01 X-100.82539 Y74.22844
G01 X-100.89331 Y74.29636
G01 X-100.93118 Y74.32745
G01 X-101.01107 Y74.38081
G01 X-101.05427 Y74.40393
G01 X-101.14302 Y74.44068
G01 X-101.18993 Y74.45490
G01 X-101.28414 Y74.47365
G01 X-101.33291 Y74.47845
G01 X-101.38094 Y74.48081
G01 X-101.39199 Y74.48084
G01 X-101.42907 Y74.47154
G01 X-101.52145 Y74.45313
G01 X-101.68808 Y74.42841
G01 X-101.77302 Y74.42003
G01 X-101.93967 Y74.41185
G01 X-102.02219 Y74.41185
G01 X-102.18881 Y74.42003
G01 X-102.27373 Y74.42841
G01 X-102.44038 Y74.45313
G01 X-102.53278 Y74.47154
G01 X-102.56974 Y74.48081
G01 X-102.65148 Y74.52445
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-102.67606 Y74.45709 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-102.67606 Y74.45709
G01 X-102.65678 Y74.47571
G01 X-102.62897 Y74.47845
G01 X-102.58094 Y74.48081
G01 X-102.56974 Y74.48081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-101.39199 Y74.48084 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-101.39199 Y74.48084
G01 X-101.27772 Y74.54192
G01 X-101.19786 Y74.59529
G01 X-101.06906 Y74.70100
G01 X-101.00111 Y74.76892
G01 X-100.89542 Y74.89773
G01 X-100.84206 Y74.97758
G01 X-100.76349 Y75.12455
G01 X-100.72674 Y75.21330
G01 X-100.71092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.71092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.71092 Y76.09620
G01 X-100.72674 Y76.14832
G01 X-100.73906 Y76.17809
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.62316 Y76.21822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.62316 Y76.21822
G01 X-100.68358 Y76.17621
G01 X-100.68358 Y76.17618
G01 X-100.69514 Y76.14832
G01 X-100.71092 Y76.09620
G01 X-100.71092 Y75.26534
G01 X-100.69514 Y75.21330
G01 X-100.65839 Y75.12455
G01 X-100.57983 Y74.97758
G01 X-100.52646 Y74.89773
G01 X-100.46593 Y74.82397
G01 X-100.42075 Y74.76892
G01 X-100.35283 Y74.70100
G01 X-100.22402 Y74.59529
G01 X-100.14417 Y74.54192
G01 X-99.99720 Y74.46336
G01 X-99.90845 Y74.42661
G01 X-99.85633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-99.02547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-99.02547 Y74.41083
G01 X-98.97343 Y74.39501
G01 X-98.88468 Y74.35826
G01 X-98.73772 Y74.27969
G01 X-98.65786 Y74.22633
G01 X-98.52906 Y74.12064
G01 X-98.46111 Y74.05269
G01 X-98.35542 Y73.92389
G01 X-98.30206 Y73.84403
G01 X-98.22349 Y73.69707
G01 X-98.18674 Y73.60832
G01 X-98.17092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.17092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.17092 Y72.72534
G01 X-98.18674 Y72.67330
G01 X-98.19825 Y72.64543
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.14282 Y72.64358 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.14282 Y72.64358
G01 X-98.15514 Y72.67330
G01 X-98.17092 Y72.72534
G01 X-98.17092 Y73.55620
G01 X-98.15514 Y73.60832
G01 X-98.11839 Y73.69707
G01 X-98.03983 Y73.84403
G01 X-97.98646 Y73.92389
G01 X-97.88075 Y74.05269
G01 X-97.86307 Y74.07040
G01 X-97.81283 Y74.12064
G01 X-97.68402 Y74.22633
G01 X-97.60417 Y74.27969
G01 X-97.51717 Y74.32620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-98.25555 Y75.06455 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-98.25555 Y75.06455
G01 X-98.16454 Y74.89427
G01 X-98.11117 Y74.81439
G01 X-98.02151 Y74.70514
G01 X-97.98682 Y74.66285
G01 X-97.91890 Y74.59493
G01 X-97.76736 Y74.47057
G01 X-97.68748 Y74.41721
G01 X-97.51717 Y74.32620
G01 X-97.51384 Y74.32620
G01 X-97.44133 Y74.32864
G01 X-97.41290 Y74.33062
G01 X-97.34961 Y74.33283
G01 X-97.20737 Y74.33283
G01 X-97.17567 Y74.33347
G01 X-97.13195 Y74.33524
G01 X-97.10234 Y74.33583
G01 X-96.69949 Y74.33583
G01 X-96.66988 Y74.33524
G01 X-96.62614 Y74.33347
G01 X-96.59446 Y74.33283
G01 X-96.45222 Y74.33283
G01 X-96.38893 Y74.33060
G01 X-96.36056 Y74.32864
G01 X-96.28796 Y74.32618
G01 X-96.28466 Y74.32618
G01 X-96.11438 Y74.41721
G01 X-96.03450 Y74.47057
G01 X-95.92525 Y74.56024
G01 X-95.88296 Y74.59493
G01 X-95.81504 Y74.66285
G01 X-95.69068 Y74.81439
G01 X-95.63732 Y74.89427
G01 X-95.54628 Y75.06450
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-96.28466 Y74.32618 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-96.28466 Y74.32618
G01 X-96.19772 Y74.27969
G01 X-96.11786 Y74.22633
G01 X-95.98906 Y74.12064
G01 X-95.92111 Y74.05269
G01 X-95.81542 Y73.92389
G01 X-95.76206 Y73.84403
G01 X-95.68349 Y73.69707
G01 X-95.64674 Y73.60832
G01 X-95.63092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.63092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.63092 Y72.72534
G01 X-95.64674 Y72.67330
G01 X-95.65825 Y72.64543
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.60282 Y72.64358 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.60282 Y72.64358
G01 X-95.61514 Y72.67330
G01 X-95.63092 Y72.72534
G01 X-95.63092 Y73.55620
G01 X-95.61514 Y73.60832
G01 X-95.57839 Y73.69707
G01 X-95.49983 Y73.84403
G01 X-95.44646 Y73.92389
G01 X-95.34075 Y74.05269
G01 X-95.27283 Y74.12064
G01 X-95.14402 Y74.22633
G01 X-95.06417 Y74.27969
G01 X-94.91720 Y74.35826
G01 X-94.82845 Y74.39501
G01 X-94.77633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.09092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.09092 Y76.09620
G01 X-93.10674 Y76.14832
G01 X-93.11906 Y76.17809
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-93.00316 Y76.21822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-93.00316 Y76.21822
G01 X-93.06359 Y76.17621
G01 X-93.06359 Y76.17618
G01 X-93.07514 Y76.14832
G01 X-93.09092 Y76.09620
G01 X-93.09092 Y75.26534
G01 X-93.10674 Y75.21330
G01 X-93.14349 Y75.12455
G01 X-93.22206 Y74.97758
G01 X-93.27542 Y74.89773
G01 X-93.38111 Y74.76892
G01 X-93.44906 Y74.70100
G01 X-93.50410 Y74.65582
G01 X-93.57786 Y74.59529
G01 X-93.65772 Y74.54192
G01 X-93.80468 Y74.46336
G01 X-93.89343 Y74.42661
G01 X-93.94547 Y74.41083
G01 X-94.77633 Y74.41083
G01 X-94.82845 Y74.42661
G01 X-94.91720 Y74.46336
G01 X-95.06417 Y74.54192
G01 X-95.14402 Y74.59529
G01 X-95.27283 Y74.70100
G01 X-95.34075 Y74.76892
G01 X-95.44646 Y74.89773
G01 X-95.49983 Y74.97758
G01 X-95.54628 Y75.06450
G01 X-95.54628 Y75.06791
G01 X-95.54875 Y75.14045
G01 X-95.55070 Y75.16885
G01 X-95.55291 Y75.23219
G01 X-95.55291 Y75.37438
G01 X-95.55355 Y75.40613
G01 X-95.55532 Y75.44980
G01 X-95.55591 Y75.47941
G01 X-95.55591 Y75.68081
G01 X-95.55507 Y75.71472
G01 X-95.54689 Y75.88137
G01 X-95.53998 Y75.95142
G01 X-95.52805 Y76.03176
G01 X-95.50016 Y76.08505
G01 X-95.48840 Y76.10989
G01 X-95.47445 Y76.13781
G01 X-95.45647 Y76.17189
G01 X-95.44268 Y76.19945
G01 X-95.43031 Y76.22566
G01 X-95.42411 Y76.23643
G01 X-95.37714 Y76.31843
G01 X-95.33996 Y76.37651
G01 X-95.33264 Y76.38680
G01 X-95.23374 Y76.50491
G01 X-95.21093 Y76.53085
G01 X-95.18502 Y76.55363
G01 X-95.06691 Y76.65254
G01 X-95.05662 Y76.65985
G01 X-94.99853 Y76.69704
G01 X-94.90889 Y76.74840
G01 X-94.84552 Y76.76427
G01 X-94.78060 Y76.77723
G01 X-94.61395 Y76.80194
G01 X-94.55563 Y76.80771
G01 X-94.38901 Y76.81588
G01 X-94.33285 Y76.81588
G01 X-94.16622 Y76.80771
G01 X-94.10786 Y76.80194
G01 X-93.94123 Y76.77723
G01 X-93.87633 Y76.76427
G01 X-93.81296 Y76.74840
G01 X-93.72332 Y76.69704
G01 X-93.66523 Y76.65985
G01 X-93.65495 Y76.65254
G01 X-93.53681 Y76.55365
G01 X-93.51090 Y76.53082
G01 X-93.48810 Y76.50494
G01 X-93.47176 Y76.48540
G01 X-93.40750 Y76.41820
G01 X-93.37146 Y76.38507
G01 X-93.35048 Y76.36503
G01 X-93.31794 Y76.33273
G01 X-93.17667 Y76.21929
G01 X-93.17613 Y76.21896
G01 X-93.11906 Y76.17809
G01 X-93.11738 Y76.17690
G01 X-93.10219 Y76.17570
G01 X-93.06384 Y76.17603
G01 X-93.06359 Y76.17618
G01 X-93.00316 Y76.21822
G01 X-92.89358 Y76.30727
G01 X-92.86585 Y76.33377
G01 X-92.83438 Y76.36227
G01 X-92.80905 Y76.38398
G01 X-92.74398 Y76.44720
G01 X-92.72825 Y76.46455
G01 X-92.71007 Y76.48540
G01 X-92.69374 Y76.50491
G01 X-92.67093 Y76.53085
G01 X-92.64502 Y76.55363
G01 X-92.52691 Y76.65254
G01 X-92.51662 Y76.65985
G01 X-92.45853 Y76.69704
G01 X-92.36889 Y76.74840
G01 X-92.30552 Y76.76427
G01 X-92.24060 Y76.77723
G01 X-92.07395 Y76.80194
G01 X-92.01563 Y76.80771
G01 X-91.84901 Y76.81588
G01 X-91.79285 Y76.81588
G01 X-91.62622 Y76.80771
G01 X-91.56786 Y76.80194
G01 X-91.40123 Y76.77723
G01 X-91.33633 Y76.76427
G01 X-91.27296 Y76.74840
G01 X-91.18332 Y76.69704
G01 X-91.12523 Y76.65985
G01 X-91.11495 Y76.65254
G01 X-90.99681 Y76.55365
G01 X-90.97090 Y76.53082
G01 X-90.94810 Y76.50494
G01 X-90.93176 Y76.48540
G01 X-90.86750 Y76.41820
G01 X-90.83146 Y76.38507
G01 X-90.81048 Y76.36503
G01 X-90.77794 Y76.33273
G01 X-90.63667 Y76.21929
G01 X-90.63613 Y76.21896
G01 X-90.57906 Y76.17809
G01 X-90.57738 Y76.17690
G01 X-90.56219 Y76.17570
G01 X-90.52384 Y76.17603
G01 X-90.52358 Y76.17618
G01 X-90.46316 Y76.21822
G01 X-90.35358 Y76.30727
G01 X-90.32585 Y76.33377
G01 X-90.29438 Y76.36227
G01 X-90.26905 Y76.38398
G01 X-90.20398 Y76.44720
G01 X-90.18825 Y76.46455
G01 X-90.17007 Y76.48540
G01 X-90.15374 Y76.50491
G01 X-90.13093 Y76.53085
G01 X-90.10502 Y76.55363
G01 X-89.98691 Y76.65254
G01 X-89.97662 Y76.65985
G01 X-89.91853 Y76.69704
G01 X-89.82889 Y76.74840
G01 X-89.76552 Y76.76427
G01 X-89.70060 Y76.77723
G01 X-89.53395 Y76.80194
G01 X-89.47563 Y76.80771
G01 X-89.31775 Y76.81545
G01 X-89.30901 Y76.81596
G01 X-89.28963 Y76.81720
G01 X-89.25262 Y76.81840
G01 X-89.08516 Y76.81840
G01 X-89.04337 Y76.81698
G01 X-89.02369 Y76.81566
G01 X-88.97921 Y76.81418
G01 X-88.88747 Y76.81416
G01 X-88.85369 Y76.80207
G01 X-88.79019 Y76.77578
G01 X-88.73606 Y76.75017
G01 X-88.64332 Y76.69704
G01 X-88.58523 Y76.65985
G01 X-88.57495 Y76.65254
G01 X-88.45681 Y76.55365
G01 X-88.43090 Y76.53085
G01 X-88.40810 Y76.50494
G01 X-88.30926 Y76.38685
G01 X-88.30190 Y76.37651
G01 X-88.26471 Y76.31843
G01 X-88.21155 Y76.22566
G01 X-88.19910 Y76.19932
G01 X-88.18539 Y76.17189
G01 X-88.16746 Y76.13791
G01 X-88.15349 Y76.10994
G01 X-88.14178 Y76.08518
G01 X-88.11379 Y76.03174
G01 X-88.10187 Y75.95147
G01 X-88.09494 Y75.88137
G01 X-88.08676 Y75.71472
G01 X-88.08592 Y75.68081
G01 X-88.08592 Y75.47941
G01 X-88.08651 Y75.44980
G01 X-88.08828 Y75.40608
G01 X-88.08892 Y75.37438
G01 X-88.08892 Y75.23214
G01 X-88.09113 Y75.16885
G01 X-88.09311 Y75.14042
G01 X-88.09555 Y75.06791
G01 X-88.09555 Y75.06455
G01 X-88.14206 Y74.97758
G01 X-88.19542 Y74.89773
G01 X-88.30111 Y74.76892
G01 X-88.36906 Y74.70100
G01 X-88.42410 Y74.65582
G01 X-88.49786 Y74.59529
G01 X-88.57772 Y74.54192
G01 X-88.72468 Y74.46336
G01 X-88.81343 Y74.42661
G01 X-88.86547 Y74.41083
G01 X-89.69633 Y74.41083
G01 X-89.74845 Y74.39501
G01 X-89.83720 Y74.35826
G01 X-89.98417 Y74.27969
G01 X-90.06402 Y74.22633
G01 X-90.19283 Y74.12064
G01 X-90.26075 Y74.05269
G01 X-90.36646 Y73.92389
G01 X-90.41983 Y73.84403
G01 X-90.49839 Y73.69707
G01 X-90.53514 Y73.60832
G01 X-90.55092 Y73.55620
G01 X-90.55092 Y72.97932
G01 X-90.52955 Y72.93413
G01 X-90.49051 Y72.86100
G01 X-90.45488 Y72.80154
G01 X-90.42016 Y72.73662
G01 X-90.40840 Y72.71178
G01 X-90.39445 Y72.68386
G01 X-90.37647 Y72.64975
G01 X-90.36265 Y72.62214
G01 X-90.35026 Y72.59590
G01 X-90.29714 Y72.50322
G01 X-90.25996 Y72.44513
G01 X-90.25264 Y72.43484
G01 X-90.15374 Y72.31673
G01 X-90.13093 Y72.29082
G01 X-90.10502 Y72.26801
G01 X-89.98691 Y72.16911
G01 X-89.97662 Y72.16179
G01 X-89.91853 Y72.12461
G01 X-89.82580 Y72.07147
G01 X-89.77167 Y72.04587
G01 X-89.70809 Y72.01955
G01 X-89.65181 Y71.99941
G01 X-89.54858 Y71.97139
G01 X-89.48127 Y71.95661
G01 X-89.46882 Y71.95453
G01 X-89.31538 Y71.94094
G01 X-89.28094 Y71.93873
G01 X-89.24647 Y71.94094
G01 X-89.09303 Y71.95453
G01 X-89.08056 Y71.95661
G01 X-89.01325 Y71.97139
G01 X-88.91005 Y71.99941
G01 X-88.85374 Y72.01955
G01 X-88.79019 Y72.04587
G01 X-88.73606 Y72.07147
G01 X-88.64332 Y72.12461
G01 X-88.58523 Y72.16179
G01 X-88.57495 Y72.16911
G01 X-88.45684 Y72.26801
G01 X-88.43090 Y72.29082
G01 X-88.40812 Y72.31673
G01 X-88.39176 Y72.33626
G01 X-88.37358 Y72.35712
G01 X-88.35788 Y72.37444
G01 X-88.29280 Y72.43766
G01 X-88.26748 Y72.45938
G01 X-88.23601 Y72.48788
G01 X-88.20827 Y72.51437
G01 X-88.09870 Y72.60342
G01 X-88.03827 Y72.64543
G01 X-88.03825 Y72.64543
G01 X-88.03802 Y72.64561
G01 X-87.99966 Y72.64594
G01 X-87.98447 Y72.64475
G01 X-87.98282 Y72.64358
G01 X-87.92572 Y72.60268
G01 X-87.92519 Y72.60235
G01 X-87.78392 Y72.48892
G01 X-87.75143 Y72.45666
G01 X-87.73037 Y72.43657
G01 X-87.69438 Y72.40350
G01 X-87.63012 Y72.33629
G01 X-87.61374 Y72.31673
G01 X-87.59095 Y72.29082
G01 X-87.56502 Y72.26801
G01 X-87.44691 Y72.16911
G01 X-87.43662 Y72.16179
G01 X-87.37853 Y72.12461
G01 X-87.28580 Y72.07147
G01 X-87.23167 Y72.04587
G01 X-87.16809 Y72.01955
G01 X-87.11181 Y71.99941
G01 X-87.00858 Y71.97139
G01 X-86.94127 Y71.95661
G01 X-86.92882 Y71.95453
G01 X-86.77538 Y71.94094
G01 X-86.74094 Y71.93873
G01 X-86.70647 Y71.94094
G01 X-86.55303 Y71.95453
G01 X-86.54056 Y71.95661
G01 X-86.47325 Y71.97139
G01 X-86.37005 Y71.99941
G01 X-86.31374 Y72.01955
G01 X-86.25019 Y72.04587
G01 X-86.19606 Y72.07147
G01 X-86.10332 Y72.12461
G01 X-86.04523 Y72.16179
G01 X-86.03495 Y72.16911
G01 X-85.91684 Y72.26801
G01 X-85.89090 Y72.29082
G01 X-85.86812 Y72.31673
G01 X-85.85176 Y72.33626
G01 X-85.83358 Y72.35712
G01 X-85.81788 Y72.37444
G01 X-85.75280 Y72.43766
G01 X-85.72748 Y72.45938
G01 X-85.69601 Y72.48788
G01 X-85.66827 Y72.51437
G01 X-85.55870 Y72.60342
G01 X-85.49827 Y72.64543
G01 X-85.49825 Y72.64543
G01 X-85.49802 Y72.64561
G01 X-85.45966 Y72.64594
G01 X-85.44447 Y72.64475
G01 X-85.44282 Y72.64358
G01 X-85.38572 Y72.60268
G01 X-85.38519 Y72.60235
G01 X-85.24392 Y72.48892
G01 X-85.21143 Y72.45666
G01 X-85.19037 Y72.43657
G01 X-85.15438 Y72.40350
G01 X-85.09012 Y72.33629
G01 X-85.07374 Y72.31673
G01 X-85.05095 Y72.29082
G01 X-85.02502 Y72.26801
G01 X-84.90691 Y72.16911
G01 X-84.89662 Y72.16179
G01 X-84.83853 Y72.12461
G01 X-84.74580 Y72.07147
G01 X-84.69167 Y72.04587
G01 X-84.62809 Y72.01955
G01 X-84.57181 Y71.99941
G01 X-84.46858 Y71.97139
G01 X-84.40127 Y71.95661
G01 X-84.38882 Y71.95453
G01 X-84.23538 Y71.94094
G01 X-84.20094 Y71.93873
G01 X-84.16647 Y71.94094
G01 X-84.01303 Y71.95453
G01 X-84.00056 Y71.95661
G01 X-83.93325 Y71.97139
G01 X-83.83005 Y71.99941
G01 X-83.77374 Y72.01955
G01 X-83.71019 Y72.04587
G01 X-83.65606 Y72.07147
G01 X-83.56332 Y72.12461
G01 X-83.50523 Y72.16179
G01 X-83.49495 Y72.16911
G01 X-83.37684 Y72.26801
G01 X-83.35090 Y72.29082
G01 X-83.32812 Y72.31673
G01 X-83.31176 Y72.33626
G01 X-83.29358 Y72.35712
G01 X-83.27788 Y72.37444
G01 X-83.21280 Y72.43766
G01 X-83.18748 Y72.45938
G01 X-83.15601 Y72.48788
G01 X-83.12827 Y72.51437
G01 X-83.01870 Y72.60342
G01 X-82.95827 Y72.64543
G01 X-82.95825 Y72.64543
G01 X-82.95802 Y72.64561
G01 X-82.91966 Y72.64594
G01 X-82.90447 Y72.64475
G01 X-82.90282 Y72.64358
G01 X-82.84572 Y72.60268
G01 X-82.84519 Y72.60235
G01 X-82.70392 Y72.48892
G01 X-82.67143 Y72.45666
G01 X-82.65037 Y72.43657
G01 X-82.61438 Y72.40350
G01 X-82.55012 Y72.33629
G01 X-82.53374 Y72.31673
G01 X-82.51095 Y72.29082
G01 X-82.48502 Y72.26801
G01 X-82.36691 Y72.16911
G01 X-82.35662 Y72.16179
G01 X-82.29853 Y72.12461
G01 X-82.20577 Y72.07147
G01 X-82.18555 Y72.06189
G01 X-82.15167 Y72.04587
G01 X-82.10750 Y72.02682
G01 X-82.09485 Y72.02186
G01 X-82.08433 Y72.01782
G01 X-81.98659 Y71.97203
G01 X-81.93686 Y71.94406
G01 X-81.91753 Y71.93355
G01 X-81.86620 Y71.90657
G01 X-81.71238 Y71.80558
G01 X-81.70851 Y71.80769
G01 X-81.69218 Y71.81688
G01 X-81.63597 Y71.84912
G01 X-81.61845 Y71.85943
G01 X-81.61299 Y71.86271
G01 X-81.45855 Y71.93619
G01 X-81.44750 Y71.94007
G01 X-81.39063 Y71.96283
G01 X-81.38990 Y71.96316
G01 X-81.29035 Y71.99931
G01 X-81.23374 Y72.01955
G01 X-81.17019 Y72.04587
G01 X-81.11606 Y72.07147
G01 X-81.02332 Y72.12461
G01 X-80.96523 Y72.16179
G01 X-80.95495 Y72.16911
G01 X-80.83684 Y72.26801
G01 X-80.81088 Y72.29085
G01 X-80.78810 Y72.31671
G01 X-80.78210 Y72.32389
G01 X-80.73425 Y72.38104
G01 X-80.67740 Y72.44142
G01 X-80.67672 Y72.44205
G01 X-80.64372 Y72.47530
G01 X-80.62670 Y72.49359
G01 X-80.49160 Y72.61033
G01 X-80.46422 Y72.62953
G01 X-80.40697 Y72.67266
G01 X-80.40626 Y72.67271
G01 X-80.37217 Y72.67182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.40697 Y72.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.40697 Y72.67266
G01 X-80.40674 Y72.67330
G01 X-80.39092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.39092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.39092 Y73.55620
G01 X-80.40674 Y73.60832
G01 X-80.44349 Y73.69707
G01 X-80.52206 Y73.84403
G01 X-80.57542 Y73.92389
G01 X-80.68111 Y74.05269
G01 X-80.74906 Y74.12064
G01 X-80.87786 Y74.22633
G01 X-80.95772 Y74.27969
G01 X-81.10468 Y74.35826
G01 X-81.19343 Y74.39501
G01 X-81.24547 Y74.41083
G01 X-82.07633 Y74.41083
G01 X-82.12845 Y74.42661
G01 X-82.21720 Y74.46336
G01 X-82.36417 Y74.54192
G01 X-82.44402 Y74.59529
G01 X-82.57283 Y74.70100
G01 X-82.64075 Y74.76892
G01 X-82.68593 Y74.82397
G01 X-82.74646 Y74.89773
G01 X-82.79983 Y74.97758
G01 X-82.87839 Y75.12455
G01 X-82.91514 Y75.21330
G01 X-82.93092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.93092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.93092 Y76.09620
G01 X-82.94674 Y76.14832
G01 X-82.95906 Y76.17809
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.84316 Y76.21822 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.84316 Y76.21822
G01 X-82.90358 Y76.17621
G01 X-82.90358 Y76.17618
G01 X-82.91514 Y76.14832
G01 X-82.93092 Y76.09620
G01 X-82.93092 Y75.26534
G01 X-82.94674 Y75.21330
G01 X-82.98349 Y75.12455
G01 X-83.06206 Y74.97758
G01 X-83.11542 Y74.89773
G01 X-83.22111 Y74.76892
G01 X-83.28906 Y74.70100
G01 X-83.34410 Y74.65582
G01 X-83.41786 Y74.59529
G01 X-83.49772 Y74.54192
G01 X-83.64468 Y74.46336
G01 X-83.73343 Y74.42661
G01 X-83.78547 Y74.41083
G01 X-84.61633 Y74.41083
G01 X-84.66845 Y74.42661
G01 X-84.75720 Y74.46336
G01 X-84.90417 Y74.54192
G01 X-84.98402 Y74.59529
G01 X-85.11283 Y74.70100
G01 X-85.18075 Y74.76892
G01 X-85.28646 Y74.89773
G01 X-85.33983 Y74.97758
G01 X-85.38628 Y75.06450
G01 X-85.38628 Y75.06791
G01 X-85.38875 Y75.14045
G01 X-85.39070 Y75.16885
G01 X-85.39291 Y75.23219
G01 X-85.39291 Y75.37438
G01 X-85.39355 Y75.40613
G01 X-85.39532 Y75.44980
G01 X-85.39591 Y75.47941
G01 X-85.39591 Y75.68081
G01 X-85.39507 Y75.71472
G01 X-85.38689 Y75.88137
G01 X-85.37998 Y75.95142
G01 X-85.36805 Y76.03176
G01 X-85.34016 Y76.08505
G01 X-85.32840 Y76.10989
G01 X-85.31445 Y76.13781
G01 X-85.29647 Y76.17189
G01 X-85.28268 Y76.19945
G01 X-85.27031 Y76.22566
G01 X-85.26411 Y76.23643
G01 X-85.21714 Y76.31843
G01 X-85.17996 Y76.37651
G01 X-85.17264 Y76.38680
G01 X-85.07374 Y76.50491
G01 X-85.05093 Y76.53085
G01 X-85.02502 Y76.55363
G01 X-84.90691 Y76.65254
G01 X-84.89662 Y76.65985
G01 X-84.83853 Y76.69704
G01 X-84.77526 Y76.73331
G01 X-84.68153 Y76.75678
G01 X-84.61824 Y76.76940
G01 X-84.45159 Y76.79412
G01 X-84.39484 Y76.79973
G01 X-84.22822 Y76.80791
G01 X-84.17364 Y76.80791
G01 X-84.00701 Y76.79973
G01 X-83.95024 Y76.79412
G01 X-83.78362 Y76.76940
G01 X-83.72032 Y76.75678
G01 X-83.62660 Y76.73331
G01 X-83.56332 Y76.69704
G01 X-83.50523 Y76.65985
G01 X-83.49495 Y76.65254
G01 X-83.37681 Y76.55365
G01 X-83.35090 Y76.53082
G01 X-83.32810 Y76.50494
G01 X-83.31176 Y76.48540
G01 X-83.24750 Y76.41820
G01 X-83.21146 Y76.38507
G01 X-83.19048 Y76.36503
G01 X-83.15794 Y76.33273
G01 X-83.01667 Y76.21929
G01 X-83.01613 Y76.21896
G01 X-82.95906 Y76.17809
G01 X-82.95738 Y76.17690
G01 X-82.94219 Y76.17570
G01 X-82.90384 Y76.17603
G01 X-82.90358 Y76.17618
G01 X-82.84316 Y76.21822
G01 X-82.73358 Y76.30727
G01 X-82.70585 Y76.33377
G01 X-82.67438 Y76.36227
G01 X-82.64905 Y76.38398
G01 X-82.58398 Y76.44720
G01 X-82.56825 Y76.46455
G01 X-82.55007 Y76.48540
G01 X-82.53374 Y76.50491
G01 X-82.51093 Y76.53085
G01 X-82.48502 Y76.55363
G01 X-82.36691 Y76.65254
G01 X-82.35662 Y76.65985
G01 X-82.29853 Y76.69704
G01 X-82.20580 Y76.75017
G01 X-82.15167 Y76.77578
G01 X-82.08814 Y76.80209
G01 X-82.03181 Y76.82223
G01 X-81.92863 Y76.85025
G01 X-81.86127 Y76.86503
G01 X-81.84882 Y76.86714
G01 X-81.69538 Y76.88073
G01 X-81.66094 Y76.88294
G01 X-81.62647 Y76.88073
G01 X-81.47303 Y76.86714
G01 X-81.46056 Y76.86503
G01 X-81.39320 Y76.85025
G01 X-81.29005 Y76.82226
G01 X-81.23369 Y76.80207
G01 X-81.17019 Y76.77578
G01 X-81.11606 Y76.75017
G01 X-81.02332 Y76.69704
G01 X-80.96523 Y76.65985
G01 X-80.95495 Y76.65254
G01 X-80.83681 Y76.55365
G01 X-80.81090 Y76.53085
G01 X-80.78810 Y76.50494
G01 X-80.68926 Y76.38685
G01 X-80.68190 Y76.37651
G01 X-80.64471 Y76.31843
G01 X-80.59155 Y76.22566
G01 X-80.57910 Y76.19932
G01 X-80.56539 Y76.17189
G01 X-80.54746 Y76.13791
G01 X-80.53349 Y76.10994
G01 X-80.52178 Y76.08518
G01 X-80.48695 Y76.02010
G01 X-80.45134 Y75.96074
G01 X-80.41228 Y75.88751
G01 X-80.39092 Y75.84235
G01 X-80.39092 Y75.26534
G01 X-80.37514 Y75.21330
G01 X-80.33839 Y75.12455
G01 X-80.25983 Y74.97758
G01 X-80.20646 Y74.89773
G01 X-80.14593 Y74.82397
G01 X-80.10075 Y74.76892
G01 X-80.03283 Y74.70100
G01 X-79.90402 Y74.59529
G01 X-79.82417 Y74.54192
G01 X-79.67720 Y74.46336
G01 X-79.58845 Y74.42661
G01 X-79.53633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.85092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.85092 Y73.55620
G01 X-77.86674 Y73.60832
G01 X-77.90349 Y73.69707
G01 X-77.98206 Y73.84403
G01 X-78.03542 Y73.92389
G01 X-78.14111 Y74.05269
G01 X-78.20906 Y74.12064
G01 X-78.33786 Y74.22633
G01 X-78.41772 Y74.27969
G01 X-78.56468 Y74.35826
G01 X-78.65343 Y74.39501
G01 X-78.70547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.85092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.85092 Y75.26534
G01 X-77.86674 Y75.21330
G01 X-77.90349 Y75.12455
G01 X-77.98206 Y74.97758
G01 X-78.03542 Y74.89773
G01 X-78.14111 Y74.76892
G01 X-78.20906 Y74.70100
G01 X-78.26410 Y74.65582
G01 X-78.33786 Y74.59529
G01 X-78.41772 Y74.54192
G01 X-78.56468 Y74.46336
G01 X-78.65343 Y74.42661
G01 X-78.70547 Y74.41083
G01 X-79.53633 Y74.41083
G01 X-79.58845 Y74.39501
G01 X-79.67720 Y74.35826
G01 X-79.82417 Y74.27969
G01 X-79.90402 Y74.22633
G01 X-80.03283 Y74.12064
G01 X-80.10075 Y74.05269
G01 X-80.20646 Y73.92389
G01 X-80.25983 Y73.84403
G01 X-80.33839 Y73.69707
G01 X-80.37514 Y73.60832
G01 X-80.39092 Y73.55620
G01 X-80.39092 Y72.72534
G01 X-80.37540 Y72.67419
G01 X-80.37451 Y72.67352
G01 X-80.37217 Y72.67182
G01 X-80.28899 Y72.61099
G01 X-80.17011 Y72.50675
G01 X-80.15685 Y72.49268
G01 X-80.12594 Y72.46171
G01 X-80.10445 Y72.44142
G01 X-80.04769 Y72.38115
G01 X-79.99374 Y72.31673
G01 X-79.97093 Y72.29082
G01 X-79.94502 Y72.26801
G01 X-79.82691 Y72.16911
G01 X-79.81662 Y72.16179
G01 X-79.75853 Y72.12461
G01 X-79.66580 Y72.07147
G01 X-79.61167 Y72.04587
G01 X-79.54809 Y72.01955
G01 X-79.49181 Y71.99941
G01 X-79.38858 Y71.97139
G01 X-79.32127 Y71.95661
G01 X-79.30882 Y71.95453
G01 X-79.15538 Y71.94094
G01 X-79.12094 Y71.93873
G01 X-79.08647 Y71.94094
G01 X-78.93303 Y71.95453
G01 X-78.92056 Y71.95661
G01 X-78.85325 Y71.97139
G01 X-78.75013 Y71.99938
G01 X-78.74604 Y72.00083
G01 X-78.69374 Y72.01955
G01 X-78.63019 Y72.04587
G01 X-78.57603 Y72.07147
G01 X-78.48332 Y72.12461
G01 X-78.42523 Y72.16179
G01 X-78.41495 Y72.16911
G01 X-78.29684 Y72.26801
G01 X-78.27088 Y72.29085
G01 X-78.24810 Y72.31671
G01 X-78.24210 Y72.32389
G01 X-78.19425 Y72.38104
G01 X-78.13740 Y72.44142
G01 X-78.13672 Y72.44205
G01 X-78.10372 Y72.47530
G01 X-78.08670 Y72.49359
G01 X-77.95160 Y72.61033
G01 X-77.92422 Y72.62953
G01 X-77.86697 Y72.67266
G01 X-77.86626 Y72.67271
G01 X-77.83217 Y72.67182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-77.86697 Y72.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-77.86697 Y72.67266
G01 X-77.86674 Y72.67330
G01 X-77.85092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.31092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.31092 Y72.72534
G01 X-75.32674 Y72.67330
G01 X-75.32697 Y72.67266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.29217 Y72.67182 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.29217 Y72.67182
G01 X-75.32626 Y72.67271
G01 X-75.32697 Y72.67266
G01 X-75.38422 Y72.62953
G01 X-75.41160 Y72.61033
G01 X-75.54670 Y72.49359
G01 X-75.56372 Y72.47530
G01 X-75.59672 Y72.44205
G01 X-75.59740 Y72.44142
G01 X-75.65425 Y72.38104
G01 X-75.70210 Y72.32389
G01 X-75.70810 Y72.31671
G01 X-75.73088 Y72.29085
G01 X-75.75684 Y72.26801
G01 X-75.87495 Y72.16911
G01 X-75.88523 Y72.16179
G01 X-75.94332 Y72.12461
G01 X-76.03603 Y72.07147
G01 X-76.09019 Y72.04587
G01 X-76.15374 Y72.01955
G01 X-76.20604 Y72.00083
G01 X-76.21013 Y71.99938
G01 X-76.31325 Y71.97139
G01 X-76.38056 Y71.95661
G01 X-76.39303 Y71.95453
G01 X-76.54647 Y71.94094
G01 X-76.58094 Y71.93873
G01 X-76.61538 Y71.94094
G01 X-76.76882 Y71.95453
G01 X-76.78127 Y71.95661
G01 X-76.84858 Y71.97139
G01 X-76.95181 Y71.99941
G01 X-77.00809 Y72.01955
G01 X-77.07167 Y72.04587
G01 X-77.12580 Y72.07147
G01 X-77.21853 Y72.12461
G01 X-77.27662 Y72.16179
G01 X-77.28691 Y72.16911
G01 X-77.40502 Y72.26801
G01 X-77.43093 Y72.29082
G01 X-77.45374 Y72.31673
G01 X-77.50769 Y72.38115
G01 X-77.56445 Y72.44142
G01 X-77.58594 Y72.46171
G01 X-77.61685 Y72.49268
G01 X-77.63011 Y72.50675
G01 X-77.74899 Y72.61099
G01 X-77.83217 Y72.67182
G01 X-77.83451 Y72.67352
G01 X-77.83540 Y72.67419
G01 X-77.85092 Y72.72534
G01 X-77.85092 Y73.55620
G01 X-77.83514 Y73.60832
G01 X-77.79839 Y73.69707
G01 X-77.71983 Y73.84403
G01 X-77.66646 Y73.92389
G01 X-77.56075 Y74.05269
G01 X-77.49283 Y74.12064
G01 X-77.36402 Y74.22633
G01 X-77.28417 Y74.27969
G01 X-77.13720 Y74.35826
G01 X-77.04845 Y74.39501
G01 X-76.99633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.31092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.31092 Y76.09620
G01 X-75.32674 Y76.14832
G01 X-75.36349 Y76.23707
G01 X-75.41399 Y76.33153
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.74937 Y76.71901 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.74937 Y76.71901
G01 X-75.75874 Y76.73316
G01 X-75.76037 Y76.73559
G01 X-75.76733 Y76.74131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.23185 Y76.28576 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.23185 Y76.28576
G01 X-75.32245 Y76.29529
G01 X-75.40238 Y76.32127
G01 X-75.46154 Y76.37357
G01 X-75.49014 Y76.40364
G01 X-75.52570 Y76.43907
G01 X-75.53421 Y76.44708
G01 X-75.63741 Y76.56295
G01 X-75.69059 Y76.63435
G01 X-75.71340 Y76.66635
G01 X-75.74937 Y76.71901
G01 X-75.75874 Y76.73311
G01 X-75.75874 Y76.73316
G01 X-75.76070 Y76.74131
G01 X-75.76733 Y76.74131
G01 X-75.80677 Y76.75543
G01 X-75.89738 Y76.78299
G01 X-75.97401 Y76.80217
G01 X-76.07157 Y76.81058
G01 X-76.14193 Y76.82063
G01 X-76.14782 Y76.82145
G01 X-76.21935 Y76.83112
G01 X-76.31061 Y76.84956
G01 X-76.31320 Y76.85025
G01 X-76.38056 Y76.86503
G01 X-76.39301 Y76.86714
G01 X-76.53375 Y76.87961
G01 X-76.54652 Y76.88022
G01 X-76.61533 Y76.88022
G01 X-76.62808 Y76.87961
G01 X-76.76882 Y76.86714
G01 X-76.78127 Y76.86503
G01 X-76.84863 Y76.85025
G01 X-76.95181 Y76.82223
G01 X-77.00814 Y76.80209
G01 X-77.07167 Y76.77578
G01 X-77.12580 Y76.75017
G01 X-77.21853 Y76.69704
G01 X-77.27662 Y76.65985
G01 X-77.28691 Y76.65254
G01 X-77.40502 Y76.55363
G01 X-77.43093 Y76.53085
G01 X-77.45374 Y76.50491
G01 X-77.55264 Y76.38680
G01 X-77.55996 Y76.37651
G01 X-77.59714 Y76.31843
G01 X-77.64411 Y76.23643
G01 X-77.65031 Y76.22566
G01 X-77.66268 Y76.19945
G01 X-77.67647 Y76.17189
G01 X-77.69445 Y76.13781
G01 X-77.70840 Y76.10989
G01 X-77.72016 Y76.08505
G01 X-77.75490 Y76.02013
G01 X-77.79051 Y75.96069
G01 X-77.82955 Y75.88751
G01 X-77.85092 Y75.84235
G01 X-77.85092 Y75.26534
G01 X-77.83514 Y75.21330
G01 X-77.79839 Y75.12455
G01 X-77.71983 Y74.97758
G01 X-77.66646 Y74.89773
G01 X-77.60593 Y74.82397
G01 X-77.56075 Y74.76892
G01 X-77.49283 Y74.70100
G01 X-77.36402 Y74.59529
G01 X-77.28417 Y74.54192
G01 X-77.13720 Y74.46336
G01 X-77.04845 Y74.42661
G01 X-76.99633 Y74.41083
G01 X-76.16547 Y74.41083
G01 X-76.11343 Y74.42661
G01 X-76.02468 Y74.46336
G01 X-75.87772 Y74.54192
G01 X-75.79786 Y74.59529
G01 X-75.72410 Y74.65582
G01 X-75.66906 Y74.70100
G01 X-75.60111 Y74.76892
G01 X-75.49542 Y74.89773
G01 X-75.44206 Y74.97758
G01 X-75.36349 Y75.12455
G01 X-75.32674 Y75.21330
G01 X-75.31092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.16547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.16547 Y74.41083
G01 X-76.11343 Y74.39501
G01 X-76.02468 Y74.35826
G01 X-75.87772 Y74.27969
G01 X-75.79786 Y74.22633
G01 X-75.66906 Y74.12064
G01 X-75.60111 Y74.05269
G01 X-75.49542 Y73.92389
G01 X-75.44206 Y73.84403
G01 X-75.36349 Y73.69707
G01 X-75.32674 Y73.60832
G01 X-75.31092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.45633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.45633 Y74.41083
G01 X-74.50845 Y74.42661
G01 X-74.59720 Y74.46336
G01 X-74.74417 Y74.54192
G01 X-74.82402 Y74.59529
G01 X-74.95283 Y74.70100
G01 X-75.02075 Y74.76892
G01 X-75.06593 Y74.82397
G01 X-75.12646 Y74.89773
G01 X-75.17983 Y74.97758
G01 X-75.25839 Y75.12455
G01 X-75.29514 Y75.21330
G01 X-75.31092 Y75.26534
G01 X-75.31092 Y76.09620
G01 X-75.29514 Y76.14832
G01 X-75.25839 Y76.23707
G01 X-75.23258 Y76.28535
G01 X-75.22052 Y76.29203
G01 X-75.15933 Y76.32871
G01 X-75.12128 Y76.35269
G01 X-75.04914 Y76.40047
G01 X-74.97909 Y76.45264
G01 X-74.94894 Y76.47789
G01 X-74.91625 Y76.50697
G01 X-74.89674 Y76.52543
G01 X-74.86502 Y76.55363
G01 X-74.74691 Y76.65254
G01 X-74.73662 Y76.65985
G01 X-74.67853 Y76.69704
G01 X-74.58577 Y76.75017
G01 X-74.53167 Y76.77578
G01 X-74.46814 Y76.80209
G01 X-74.41181 Y76.82226
G01 X-74.30863 Y76.85025
G01 X-74.24127 Y76.86503
G01 X-74.22882 Y76.86714
G01 X-74.08808 Y76.87961
G01 X-74.07533 Y76.88022
G01 X-74.00652 Y76.88022
G01 X-73.99375 Y76.87961
G01 X-73.85303 Y76.86714
G01 X-73.84056 Y76.86503
G01 X-73.77320 Y76.85025
G01 X-73.67005 Y76.82226
G01 X-73.61369 Y76.80207
G01 X-73.55019 Y76.77578
G01 X-73.49606 Y76.75017
G01 X-73.40332 Y76.69704
G01 X-73.34521 Y76.65985
G01 X-73.33492 Y76.65254
G01 X-73.21681 Y76.55365
G01 X-73.19093 Y76.53087
G01 X-73.16812 Y76.50491
G01 X-73.11422 Y76.44055
G01 X-73.05740 Y76.38022
G01 X-73.03581 Y76.35983
G01 X-73.00500 Y76.32897
G01 X-72.99164 Y76.31479
G01 X-72.87287 Y76.21065
G01 X-72.78969 Y76.14985
G01 X-72.78966 Y76.14982
G01 X-72.75560 Y76.14896
G01 X-72.75486 Y76.14901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-72.78966 Y76.14982 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-72.78966 Y76.14982
G01 X-72.78649 Y76.14751
G01 X-72.77092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.91633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.91633 Y74.41083
G01 X-71.96845 Y74.39501
G01 X-72.05720 Y74.35826
G01 X-72.20417 Y74.27969
G01 X-72.28402 Y74.22633
G01 X-72.41283 Y74.12064
G01 X-72.48075 Y74.05269
G01 X-72.58646 Y73.92389
G01 X-72.63983 Y73.84403
G01 X-72.71839 Y73.69707
G01 X-72.75514 Y73.60832
G01 X-72.77092 Y73.55620
G01 X-72.77092 Y72.97932
G01 X-72.79228 Y72.93413
G01 X-72.83134 Y72.86095
G01 X-72.87221 Y72.79275
G01 X-72.90688 Y72.72796
G01 X-72.91443 Y72.71201
G01 X-72.92382 Y72.69285
G01 X-72.94569 Y72.64993
G01 X-72.95481 Y72.63136
G01 X-72.97155 Y72.59603
G01 X-73.02471 Y72.50322
G01 X-73.06190 Y72.44513
G01 X-73.06924 Y72.43482
G01 X-73.16208 Y72.32392
G01 X-73.16810 Y72.31671
G01 X-73.19088 Y72.29085
G01 X-73.21684 Y72.26801
G01 X-73.33495 Y72.16911
G01 X-73.34523 Y72.16179
G01 X-73.40332 Y72.12461
G01 X-73.49603 Y72.07147
G01 X-73.55019 Y72.04587
G01 X-73.61374 Y72.01955
G01 X-73.66604 Y72.00083
G01 X-73.67013 Y71.99938
G01 X-73.77325 Y71.97139
G01 X-73.84056 Y71.95661
G01 X-73.85303 Y71.95453
G01 X-74.00647 Y71.94094
G01 X-74.04094 Y71.93873
G01 X-74.07538 Y71.94094
G01 X-74.22882 Y71.95453
G01 X-74.24127 Y71.95661
G01 X-74.30858 Y71.97139
G01 X-74.41181 Y71.99941
G01 X-74.46809 Y72.01955
G01 X-74.53167 Y72.04587
G01 X-74.58580 Y72.07147
G01 X-74.67853 Y72.12461
G01 X-74.73662 Y72.16179
G01 X-74.74691 Y72.16911
G01 X-74.86502 Y72.26801
G01 X-74.89093 Y72.29082
G01 X-74.91374 Y72.31673
G01 X-74.96769 Y72.38115
G01 X-75.02445 Y72.44142
G01 X-75.04594 Y72.46171
G01 X-75.07685 Y72.49268
G01 X-75.09011 Y72.50675
G01 X-75.20899 Y72.61099
G01 X-75.29217 Y72.67182
G01 X-75.29451 Y72.67352
G01 X-75.29540 Y72.67419
G01 X-75.31092 Y72.72534
G01 X-75.31092 Y73.55620
G01 X-75.29514 Y73.60832
G01 X-75.25839 Y73.69707
G01 X-75.17983 Y73.84403
G01 X-75.12646 Y73.92389
G01 X-75.02075 Y74.05269
G01 X-74.95283 Y74.12064
G01 X-74.82402 Y74.22633
G01 X-74.74417 Y74.27969
G01 X-74.59720 Y74.35826
G01 X-74.50845 Y74.39501
G01 X-74.45633 Y74.41083
G01 X-73.62547 Y74.41083
G01 X-73.57343 Y74.42661
G01 X-73.48468 Y74.46336
G01 X-73.33772 Y74.54192
G01 X-73.25786 Y74.59529
G01 X-73.18410 Y74.65582
G01 X-73.12906 Y74.70100
G01 X-73.06111 Y74.76892
G01 X-72.95542 Y74.89773
G01 X-72.90206 Y74.97758
G01 X-72.82349 Y75.12455
G01 X-72.78674 Y75.21330
G01 X-72.77092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.62547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.62547 Y74.41083
G01 X-73.57343 Y74.39501
G01 X-73.48468 Y74.35826
G01 X-73.33772 Y74.27969
G01 X-73.25786 Y74.22633
G01 X-73.12906 Y74.12064
G01 X-73.06111 Y74.05269
G01 X-72.95542 Y73.92389
G01 X-72.90206 Y73.84403
G01 X-72.82349 Y73.69707
G01 X-72.78674 Y73.60832
G01 X-72.77092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.33711 Y71.78907 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.33711 Y71.78907
G01 X-71.36033 Y71.81229
G01 X-71.45291 Y71.80317
G01 X-71.54897 Y71.80317
G01 X-71.64153 Y71.81229
G01 X-71.66475 Y71.78907
G01 X-71.50094 Y71.77734
G01 X-71.33711 Y71.78907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.23092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.23092 Y73.55620
G01 X-70.24674 Y73.60832
G01 X-70.28349 Y73.69707
G01 X-70.36206 Y73.84403
G01 X-70.41540 Y73.92389
G01 X-70.47592 Y73.99763
G01 X-70.52111 Y74.05269
G01 X-70.58906 Y74.12064
G01 X-70.71786 Y74.22633
G01 X-70.79772 Y74.27969
G01 X-70.94468 Y74.35826
G01 X-71.03340 Y74.39501
G01 X-71.08547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.23092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.23092 Y75.26534
G01 X-70.24674 Y75.21330
G01 X-70.28349 Y75.12455
G01 X-70.36206 Y74.97758
G01 X-70.41540 Y74.89773
G01 X-70.52111 Y74.76892
G01 X-70.58906 Y74.70100
G01 X-70.64410 Y74.65582
G01 X-70.71786 Y74.59529
G01 X-70.79772 Y74.54192
G01 X-70.94468 Y74.46336
G01 X-71.03340 Y74.42661
G01 X-71.08547 Y74.41083
G01 X-71.91633 Y74.41083
G01 X-71.96845 Y74.42661
G01 X-72.05720 Y74.46336
G01 X-72.20417 Y74.54192
G01 X-72.28402 Y74.59529
G01 X-72.41283 Y74.70100
G01 X-72.48075 Y74.76892
G01 X-72.52593 Y74.82397
G01 X-72.58646 Y74.89773
G01 X-72.63983 Y74.97758
G01 X-72.71839 Y75.12455
G01 X-72.75514 Y75.21330
G01 X-72.77092 Y75.26534
G01 X-72.77092 Y76.09620
G01 X-72.75514 Y76.14832
G01 X-72.75486 Y76.14901
G01 X-72.69761 Y76.19214
G01 X-72.67028 Y76.21134
G01 X-72.53515 Y76.32805
G01 X-72.51813 Y76.34634
G01 X-72.48517 Y76.37956
G01 X-72.48445 Y76.38022
G01 X-72.42763 Y76.44055
G01 X-72.37374 Y76.50491
G01 X-72.36175 Y76.51888
G01 X-72.35095 Y76.53082
G01 X-72.32502 Y76.55363
G01 X-72.20691 Y76.65254
G01 X-72.19662 Y76.65985
G01 X-72.13853 Y76.69704
G01 X-72.04577 Y76.75017
G01 X-71.99167 Y76.77578
G01 X-71.92814 Y76.80209
G01 X-71.87181 Y76.82226
G01 X-71.76863 Y76.85025
G01 X-71.70127 Y76.86503
G01 X-71.68882 Y76.86714
G01 X-71.54808 Y76.87961
G01 X-71.53533 Y76.88022
G01 X-71.46652 Y76.88022
G01 X-71.45375 Y76.87961
G01 X-71.31303 Y76.86714
G01 X-71.30056 Y76.86503
G01 X-71.23320 Y76.85025
G01 X-71.13002 Y76.82223
G01 X-71.07369 Y76.80209
G01 X-71.01016 Y76.77578
G01 X-70.95606 Y76.75017
G01 X-70.86332 Y76.69704
G01 X-70.80518 Y76.65985
G01 X-70.79492 Y76.65254
G01 X-70.67681 Y76.55365
G01 X-70.65093 Y76.53087
G01 X-70.62812 Y76.50491
G01 X-70.57420 Y76.44055
G01 X-70.51740 Y76.38022
G01 X-70.49579 Y76.35983
G01 X-70.46500 Y76.32897
G01 X-70.45164 Y76.31479
G01 X-70.33287 Y76.21065
G01 X-70.24966 Y76.14985
G01 X-70.24964 Y76.14982
G01 X-70.21557 Y76.14896
G01 X-70.21486 Y76.14901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.54545 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.54545 Y74.41083
G01 X-68.49343 Y74.39501
G01 X-68.40468 Y74.35826
G01 X-68.25769 Y74.27969
G01 X-68.17786 Y74.22633
G01 X-68.04906 Y74.12064
G01 X-67.98111 Y74.05269
G01 X-67.87542 Y73.92389
G01 X-67.82206 Y73.84403
G01 X-67.74347 Y73.69707
G01 X-67.70674 Y73.60832
G01 X-67.69092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.69092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.69092 Y72.72534
G01 X-67.70674 Y72.67330
G01 X-67.70697 Y72.67266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.58899 Y72.61099 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.58899 Y72.61099
G01 X-67.67217 Y72.67182
G01 X-67.67451 Y72.67352
G01 X-67.67537 Y72.67419
G01 X-67.69092 Y72.72534
G01 X-67.69092 Y73.55620
G01 X-67.67514 Y73.60832
G01 X-67.63839 Y73.69707
G01 X-67.55980 Y73.84403
G01 X-67.50646 Y73.92389
G01 X-67.40075 Y74.05269
G01 X-67.33283 Y74.12064
G01 X-67.20402 Y74.22633
G01 X-67.12417 Y74.27969
G01 X-66.97718 Y74.35826
G01 X-66.88845 Y74.39501
G01 X-66.83633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-67.69092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-67.69092 Y75.26534
G01 X-67.67514 Y75.21330
G01 X-67.63839 Y75.12455
G01 X-67.55980 Y74.97758
G01 X-67.50646 Y74.89773
G01 X-67.44593 Y74.82397
G01 X-67.40075 Y74.76892
G01 X-67.33283 Y74.70100
G01 X-67.20402 Y74.59529
G01 X-67.12417 Y74.54192
G01 X-66.97718 Y74.46336
G01 X-66.88845 Y74.42661
G01 X-66.83633 Y74.41083
G01 X-66.00547 Y74.41083
G01 X-65.95343 Y74.39501
G01 X-65.86468 Y74.35826
G01 X-65.71772 Y74.27969
G01 X-65.63786 Y74.22633
G01 X-65.50906 Y74.12064
G01 X-65.44111 Y74.05269
G01 X-65.33542 Y73.92389
G01 X-65.28206 Y73.84403
G01 X-65.20349 Y73.69707
G01 X-65.16674 Y73.60832
G01 X-65.15092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.00547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.00547 Y74.41083
G01 X-65.95343 Y74.42661
G01 X-65.86468 Y74.46336
G01 X-65.71772 Y74.54192
G01 X-65.63786 Y74.59529
G01 X-65.56410 Y74.65582
G01 X-65.50906 Y74.70100
G01 X-65.44111 Y74.76892
G01 X-65.33542 Y74.89773
G01 X-65.28206 Y74.97758
G01 X-65.20349 Y75.12455
G01 X-65.16674 Y75.21330
G01 X-65.15092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.29633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.29633 Y74.41083
G01 X-64.34845 Y74.39501
G01 X-64.43720 Y74.35826
G01 X-64.58417 Y74.27969
G01 X-64.66402 Y74.22633
G01 X-64.79283 Y74.12064
G01 X-64.86075 Y74.05269
G01 X-64.96646 Y73.92389
G01 X-65.01983 Y73.84403
G01 X-65.09839 Y73.69707
G01 X-65.13514 Y73.60832
G01 X-65.15092 Y73.55620
G01 X-65.15092 Y72.72534
G01 X-65.13540 Y72.67419
G01 X-65.13451 Y72.67352
G01 X-65.13217 Y72.67182
G01 X-65.04899 Y72.61099
G01 X-64.93011 Y72.50675
G01 X-64.91685 Y72.49268
G01 X-64.88594 Y72.46171
G01 X-64.86445 Y72.44142
G01 X-64.80769 Y72.38115
G01 X-64.75374 Y72.31673
G01 X-64.73093 Y72.29082
G01 X-64.70502 Y72.26801
G01 X-64.58691 Y72.16911
G01 X-64.57662 Y72.16179
G01 X-64.51853 Y72.12461
G01 X-64.42580 Y72.07147
G01 X-64.37167 Y72.04587
G01 X-64.30809 Y72.01955
G01 X-64.25181 Y71.99941
G01 X-64.14858 Y71.97139
G01 X-64.08127 Y71.95661
G01 X-64.06882 Y71.95453
G01 X-63.91538 Y71.94094
G01 X-63.88094 Y71.93873
G01 X-63.84647 Y71.94094
G01 X-63.69303 Y71.95453
G01 X-63.68056 Y71.95661
G01 X-63.61325 Y71.97139
G01 X-63.51013 Y71.99938
G01 X-63.50604 Y72.00083
G01 X-63.45374 Y72.01955
G01 X-63.39019 Y72.04587
G01 X-63.33603 Y72.07147
G01 X-63.24332 Y72.12461
G01 X-63.18523 Y72.16179
G01 X-63.17495 Y72.16911
G01 X-63.05684 Y72.26801
G01 X-63.03088 Y72.29085
G01 X-63.00810 Y72.31671
G01 X-63.00210 Y72.32389
G01 X-62.95425 Y72.38104
G01 X-62.89740 Y72.44142
G01 X-62.89672 Y72.44205
G01 X-62.86372 Y72.47530
G01 X-62.84670 Y72.49359
G01 X-62.71160 Y72.61033
G01 X-62.68422 Y72.62953
G01 X-62.62697 Y72.67266
G01 X-62.62626 Y72.67271
G01 X-62.59217 Y72.67182
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.62697 Y72.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.62697 Y72.67266
G01 X-62.62674 Y72.67330
G01 X-62.61092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.15092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.15092 Y72.72534
G01 X-65.16674 Y72.67330
G01 X-65.16697 Y72.67266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-65.13217 Y72.67182 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-65.13217 Y72.67182
G01 X-65.16626 Y72.67271
G01 X-65.16697 Y72.67266
G01 X-65.22422 Y72.62953
G01 X-65.25160 Y72.61033
G01 X-65.38670 Y72.49359
G01 X-65.40372 Y72.47530
G01 X-65.43672 Y72.44205
G01 X-65.43740 Y72.44142
G01 X-65.49425 Y72.38104
G01 X-65.54210 Y72.32389
G01 X-65.54810 Y72.31671
G01 X-65.57088 Y72.29085
G01 X-65.59684 Y72.26801
G01 X-65.71495 Y72.16911
G01 X-65.72523 Y72.16179
G01 X-65.78332 Y72.12461
G01 X-65.87603 Y72.07147
G01 X-65.93019 Y72.04587
G01 X-65.99374 Y72.01955
G01 X-66.04604 Y72.00083
G01 X-66.05013 Y71.99938
G01 X-66.15322 Y71.97139
G01 X-66.22053 Y71.95661
G01 X-66.23301 Y71.95453
G01 X-66.38645 Y71.94094
G01 X-66.42092 Y71.93873
G01 X-66.45536 Y71.94094
G01 X-66.60880 Y71.95453
G01 X-66.62127 Y71.95661
G01 X-66.68858 Y71.97139
G01 X-66.79181 Y71.99941
G01 X-66.84809 Y72.01955
G01 X-66.91164 Y72.04587
G01 X-66.96580 Y72.07147
G01 X-67.05851 Y72.12461
G01 X-67.11660 Y72.16179
G01 X-67.12691 Y72.16911
G01 X-67.24502 Y72.26801
G01 X-67.27090 Y72.29080
G01 X-67.29374 Y72.31673
G01 X-67.34763 Y72.38112
G01 X-67.40445 Y72.44142
G01 X-67.42599 Y72.46177
G01 X-67.45683 Y72.49268
G01 X-67.47019 Y72.50682
G01 X-67.58899 Y72.61099
G01 X-67.67214 Y72.67182
G01 X-67.70626 Y72.67271
G01 X-67.70697 Y72.67266
G01 X-67.76422 Y72.62956
G01 X-67.79158 Y72.61033
G01 X-67.92670 Y72.49359
G01 X-67.94359 Y72.47540
G01 X-67.97664 Y72.44213
G01 X-67.97740 Y72.44142
G01 X-68.03430 Y72.38099
G01 X-68.08807 Y72.31671
G01 X-68.11083 Y72.29085
G01 X-68.13679 Y72.26799
G01 X-68.25492 Y72.16911
G01 X-68.26521 Y72.16179
G01 X-68.32332 Y72.12461
G01 X-68.41601 Y72.07147
G01 X-68.47019 Y72.04587
G01 X-68.53374 Y72.01955
G01 X-68.58604 Y72.00083
G01 X-68.59013 Y71.99938
G01 X-68.69325 Y71.97139
G01 X-68.76056 Y71.95661
G01 X-68.77301 Y71.95453
G01 X-68.92647 Y71.94094
G01 X-68.96094 Y71.93873
G01 X-68.99538 Y71.94094
G01 X-69.14882 Y71.95453
G01 X-69.16127 Y71.95661
G01 X-69.22858 Y71.97139
G01 X-69.33178 Y71.99941
G01 X-69.38809 Y72.01955
G01 X-69.44534 Y72.05773
G01 X-69.58065 Y72.15808
G01 X-69.62789 Y72.19682
G01 X-69.75149 Y72.30886
G01 X-69.79289 Y72.35026
G01 X-69.90491 Y72.47386
G01 X-69.94364 Y72.52110
G01 X-70.04402 Y72.65641
G01 X-70.08222 Y72.71366
G01 X-70.12957 Y72.79268
G01 X-70.17051 Y72.86100
G01 X-70.20955 Y72.93413
G01 X-70.23092 Y72.97932
G01 X-70.23092 Y73.55620
G01 X-70.21512 Y73.60832
G01 X-70.17839 Y73.69707
G01 X-70.09983 Y73.84403
G01 X-70.04644 Y73.92389
G01 X-69.94072 Y74.05269
G01 X-69.87283 Y74.12064
G01 X-69.81773 Y74.16583
G01 X-69.74400 Y74.22633
G01 X-69.66417 Y74.27969
G01 X-69.51720 Y74.35826
G01 X-69.42845 Y74.39501
G01 X-69.37631 Y74.41083
G01 X-68.54545 Y74.41083
G01 X-68.49343 Y74.42661
G01 X-68.40468 Y74.46336
G01 X-68.25769 Y74.54192
G01 X-68.17786 Y74.59529
G01 X-68.10410 Y74.65582
G01 X-68.04906 Y74.70100
G01 X-67.98111 Y74.76892
G01 X-67.87542 Y74.89773
G01 X-67.82206 Y74.97758
G01 X-67.74347 Y75.12455
G01 X-67.70674 Y75.21330
G01 X-67.69092 Y75.26534
G01 X-67.69092 Y75.84235
G01 X-67.71228 Y75.88751
G01 X-67.75134 Y75.96074
G01 X-67.79221 Y76.02892
G01 X-67.82683 Y76.09358
G01 X-67.83443 Y76.10964
G01 X-67.84377 Y76.12869
G01 X-67.86567 Y76.17171
G01 X-67.87486 Y76.19043
G01 X-67.89158 Y76.22571
G01 X-67.94471 Y76.31845
G01 X-67.98187 Y76.37654
G01 X-67.98919 Y76.38680
G01 X-68.08807 Y76.50494
G01 X-68.11090 Y76.53082
G01 X-68.13679 Y76.55365
G01 X-68.25490 Y76.65251
G01 X-68.26521 Y76.65985
G01 X-68.32332 Y76.69704
G01 X-68.41601 Y76.75017
G01 X-68.47019 Y76.77578
G01 X-68.53366 Y76.80207
G01 X-68.59005 Y76.82226
G01 X-68.69320 Y76.85025
G01 X-68.76056 Y76.86503
G01 X-68.77301 Y76.86714
G01 X-68.91375 Y76.87961
G01 X-68.92650 Y76.88022
G01 X-68.99533 Y76.88022
G01 X-69.00808 Y76.87961
G01 X-69.14882 Y76.86714
G01 X-69.16127 Y76.86503
G01 X-69.22863 Y76.85025
G01 X-69.33178 Y76.82226
G01 X-69.38812 Y76.80207
G01 X-69.45167 Y76.77575
G01 X-69.50575 Y76.75017
G01 X-69.59853 Y76.69704
G01 X-69.65662 Y76.65985
G01 X-69.66691 Y76.65254
G01 X-69.78499 Y76.55363
G01 X-69.81095 Y76.53079
G01 X-69.82177 Y76.51881
G01 X-69.83371 Y76.50491
G01 X-69.88763 Y76.44055
G01 X-69.94443 Y76.38022
G01 X-69.94517 Y76.37956
G01 X-69.97813 Y76.34634
G01 X-69.99513 Y76.32805
G01 X-70.13028 Y76.21134
G01 X-70.15761 Y76.19214
G01 X-70.21486 Y76.14901
G01 X-70.21512 Y76.14832
G01 X-70.23092 Y76.09620
G01 X-70.23092 Y75.26534
G01 X-70.21512 Y75.21330
G01 X-70.17839 Y75.12455
G01 X-70.09983 Y74.97758
G01 X-70.04644 Y74.89773
G01 X-69.98591 Y74.82397
G01 X-69.94072 Y74.76892
G01 X-69.87283 Y74.70100
G01 X-69.74400 Y74.59529
G01 X-69.66417 Y74.54192
G01 X-69.51720 Y74.46336
G01 X-69.42845 Y74.42661
G01 X-69.37631 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.23092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.23092 Y76.09620
G01 X-70.24649 Y76.14751
G01 X-70.24740 Y76.14819
G01 X-70.24964 Y76.14982
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.89054 Y82.17500 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.89054 Y82.17500
G01 X-64.91873 Y82.27104
G01 X-65.10156 Y82.45392
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.85018 Y82.45392 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.85018 Y82.45392
G01 X-65.10156 Y82.45392
G01 X-65.62084 Y82.66901
G01 X-65.64728 Y82.67922
G01 X-65.71589 Y82.70378
G01 X-65.76163 Y82.71768
G01 X-65.83024 Y82.73487
G01 X-65.87042 Y82.74287
G01 X-65.93903 Y82.75306
G01 X-65.97609 Y82.75672
G01 X-66.04472 Y82.76009
G01 X-66.06275 Y82.76053
G01 X-75.07972 Y82.76053
G01 X-75.09778 Y82.76009
G01 X-75.16639 Y82.75672
G01 X-75.20342 Y82.75306
G01 X-75.27203 Y82.74287
G01 X-75.31221 Y82.73487
G01 X-75.38082 Y82.71768
G01 X-75.42656 Y82.70378
G01 X-75.49517 Y82.67922
G01 X-75.52161 Y82.66901
G01 X-75.92079 Y82.50366
G01 X-76.75872 Y81.66573
G01 X-76.78851 Y81.63444
G01 X-76.83466 Y81.58354
G01 X-76.89080 Y81.51509
G01 X-76.89219 Y81.51321
G01 X-76.90880 Y81.44691
G01 X-76.92554 Y81.36289
G01 X-76.93573 Y81.29429
G01 X-76.94358 Y81.21468
G01 X-76.94695 Y81.14605
G01 X-76.94792 Y81.10691
G01 X-76.94792 Y81.04727
G01 X-76.99087 Y80.95649
G01 X-77.01863 Y80.88964
G01 X-77.07474 Y80.73282
G01 X-77.09044 Y80.68121
G01 X-77.12948 Y80.52533
G01 X-77.12971 Y80.52439
G01 X-77.13474 Y80.50450
G01 X-77.13951 Y80.48331
G01 X-77.14876 Y80.43693
G01 X-77.15846 Y80.39815
G01 X-77.17837 Y80.33249
G01 X-77.17873 Y80.33135
G01 X-77.19059 Y80.29269
G01 X-77.21051 Y80.22698
G01 X-77.22592 Y80.18397
G01 X-77.24401 Y80.14036
G01 X-77.25290 Y80.11733
G01 X-77.26217 Y80.09157
G01 X-77.26258 Y80.09045
G01 X-77.32102 Y79.92713
G01 X-77.34393 Y79.85121
G01 X-77.38927 Y79.67016
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.39092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.39092 Y75.26534
G01 X-80.40674 Y75.21330
G01 X-80.44349 Y75.12455
G01 X-80.52206 Y74.97758
G01 X-80.57542 Y74.89773
G01 X-80.68111 Y74.76892
G01 X-80.74906 Y74.70100
G01 X-80.80410 Y74.65582
G01 X-80.87786 Y74.59529
G01 X-80.95772 Y74.54192
G01 X-81.10468 Y74.46336
G01 X-81.19343 Y74.42661
G01 X-81.24547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.07633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.07633 Y74.41083
G01 X-82.12845 Y74.39501
G01 X-82.21720 Y74.35826
G01 X-82.36417 Y74.27969
G01 X-82.44402 Y74.22633
G01 X-82.57283 Y74.12064
G01 X-82.64075 Y74.05269
G01 X-82.74646 Y73.92389
G01 X-82.79983 Y73.84403
G01 X-82.87839 Y73.69707
G01 X-82.91514 Y73.60832
G01 X-82.93092 Y73.55620
G01 X-82.93092 Y72.72534
G01 X-82.91514 Y72.67330
G01 X-82.90282 Y72.64358
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.00508 Y69.51181 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.00508 Y69.51181
G01 X-83.00331 Y69.51176
G01 X-82.91804 Y69.51567
G01 X-82.85220 Y69.53043
G01 X-82.86444 Y69.50597
G01 X-82.87829 Y69.47828
G01 X-82.88898 Y69.45687
G01 X-82.89048 Y69.45387
G01 X-82.89109 Y69.45268
G01 X-82.94384 Y69.34717
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.22797 Y65.97229 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.22797 Y65.97229
G01 X-80.35594 Y65.84430
G01 X-80.65594 Y65.69434
G01 X-82.35594 Y65.69434
G01 X-82.65591 Y65.84430
G01 X-82.74991 Y65.93833
G01 X-82.79436 Y65.93833
G01 X-82.84034 Y65.91484
G01 X-82.99716 Y65.84067
G01 X-83.05294 Y65.81748
G01 X-83.20978 Y65.76137
G01 X-83.25106 Y65.74882
G01 X-83.40788 Y65.70953
G01 X-83.43965 Y65.70321
G01 X-83.59650 Y65.67994
G01 X-83.62281 Y65.67735
G01 X-83.77966 Y65.66963
G01 X-83.80422 Y65.66963
G01 X-83.96104 Y65.67735
G01 X-83.98735 Y65.67994
G01 X-84.14420 Y65.70321
G01 X-84.17597 Y65.70953
G01 X-84.33279 Y65.74882
G01 X-84.37407 Y65.76137
G01 X-84.53091 Y65.81748
G01 X-84.58669 Y65.84067
G01 X-84.74351 Y65.91484
G01 X-84.82009 Y65.95589
G01 X-84.95093 Y66.03432
G01 X-84.96319 Y66.05718
G01 X-84.99995 Y66.14593
G01 X-85.01051 Y66.18078
G01 X-84.97640 Y66.31697
G01 X-84.95093 Y66.40133
G01 X-84.89248 Y66.56470
G01 X-84.86896 Y66.62164
G01 X-84.79774 Y66.77222
G01 X-84.77694 Y66.81120
G01 X-84.69383 Y66.94986
G01 X-84.67531 Y66.97760
G01 X-84.58087 Y67.10493
G01 X-84.56353 Y67.12609
G01 X-84.45806 Y67.24245
G01 X-84.44006 Y67.26045
G01 X-84.32370 Y67.36592
G01 X-84.30254 Y67.38326
G01 X-84.17521 Y67.47770
G01 X-84.14745 Y67.49624
G01 X-84.00876 Y67.57935
G01 X-83.96978 Y67.60015
G01 X-83.81923 Y67.67138
G01 X-83.76236 Y67.69487
G01 X-83.68804 Y67.72144
G01 X-83.65281 Y67.73505
G01 X-83.59858 Y67.75751
G01 X-83.58075 Y67.76467
G01 X-83.51062 Y67.79192
G01 X-83.48763 Y67.80117
G01 X-83.42510 Y67.82708
G01 X-83.41743 Y67.84138
G01 X-83.38067 Y67.93013
G01 X-83.37077 Y67.96282
G01 X-83.29640 Y68.02385
G01 X-83.29038 Y68.02990
G01 X-83.28969 Y68.03279
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.82932 Y67.66320 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.82932 Y67.66320
G01 X-82.83653 Y67.63991
G01 X-82.84593 Y67.54433
G01 X-82.84593 Y67.52230
G01 X-82.89894 Y67.52230
G01 X-82.91540 Y67.53876
G01 X-83.03663 Y67.63825
G01 X-83.11649 Y67.69162
G01 X-83.25482 Y67.76556
G01 X-83.34354 Y67.80231
G01 X-83.42510 Y67.82708
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.15697 Y66.03435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.15697 Y66.03435
G01 X-84.95093 Y66.03432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.01051 Y66.18078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.01051 Y66.18078
G01 X-85.15697 Y66.03435
G01 X-85.79901 Y65.76841
G01 X-85.82055 Y65.76008
G01 X-85.88918 Y65.73554
G01 X-85.92558 Y65.72447
G01 X-85.99418 Y65.70727
G01 X-86.02550 Y65.70102
G01 X-86.09410 Y65.69086
G01 X-86.12255 Y65.68804
G01 X-86.19118 Y65.68466
G01 X-86.20495 Y65.68433
G01 X-87.85344 Y65.68433
G01 X-87.86720 Y65.68400
G01 X-87.93581 Y65.68063
G01 X-87.96423 Y65.67781
G01 X-88.00853 Y65.67125
G01 X-88.03002 Y65.65838
G01 X-88.05399 Y65.64237
G01 X-88.10970 Y65.60105
G01 X-88.12948 Y65.58482
G01 X-88.18038 Y65.53866
G01 X-88.18927 Y65.53021
G01 X-90.57604 Y63.14347
G01 X-90.58493 Y63.13501
G01 X-90.63583 Y63.08886
G01 X-90.65561 Y63.07263
G01 X-90.71132 Y63.03130
G01 X-90.72292 Y63.02313
G01 X-90.73692 Y63.02071
G01 X-90.80555 Y63.01053
G01 X-90.83100 Y63.00801
G01 X-90.89963 Y63.00463
G01 X-90.91193 Y63.00435
G01 X-98.26543 Y63.00435
G01 X-98.27770 Y63.00405
G01 X-98.34633 Y63.00067
G01 X-98.37175 Y62.99816
G01 X-98.44038 Y62.98797
G01 X-98.45438 Y62.98556
G01 X-98.46599 Y62.97738
G01 X-98.52169 Y62.93605
G01 X-98.54150 Y62.91982
G01 X-98.59238 Y62.87367
G01 X-98.60127 Y62.86521
G01 X-100.87497 Y60.59151
G01 X-100.88346 Y60.58264
G01 X-100.92958 Y60.53174
G01 X-100.94584 Y60.51193
G01 X-100.98714 Y60.45623
G01 X-100.99532 Y60.44459
G01 X-100.99776 Y60.43062
G01 X-101.00792 Y60.36202
G01 X-101.01043 Y60.33654
G01 X-101.01381 Y60.26791
G01 X-101.01412 Y60.25562
G01 X-101.01412 Y47.74251
G01 X-101.01381 Y47.73022
G01 X-101.01043 Y47.66161
G01 X-101.00792 Y47.63616
G01 X-100.99776 Y47.56756
G01 X-100.99532 Y47.55359
G01 X-100.98714 Y47.54195
G01 X-100.94584 Y47.48625
G01 X-100.92958 Y47.46644
G01 X-100.88346 Y47.41554
G01 X-100.87500 Y47.40667
G01 X-99.24079 Y45.77246
G01 X-99.23190 Y45.76400
G01 X-99.18100 Y45.71785
G01 X-99.16121 Y45.70162
G01 X-99.10551 Y45.66029
G01 X-99.08153 Y45.64432
G01 X-99.02085 Y45.60795
G01 X-98.99032 Y45.59164
G01 X-98.92443 Y45.56047
G01 X-98.90492 Y45.55184
G01 X-98.22042 Y45.26832
G01 X-95.05609 Y42.10391
G01 X-95.00145 Y42.12050
G01 X-94.90724 Y42.13922
G01 X-94.75116 Y42.15461
G01 X-94.65510 Y42.15461
G01 X-94.63686 Y42.15281
G01 X-94.50389 Y42.08992
G01 X-94.42663 Y42.04869
G01 X-94.28794 Y41.96559
G01 X-94.22665 Y41.92467
G01 X-94.09932 Y41.83023
G01 X-94.04837 Y41.78842
G01 X-93.93201 Y41.68296
G01 X-93.88713 Y41.63808
G01 X-93.78167 Y41.52175
G01 X-93.73983 Y41.47074
G01 X-93.64540 Y41.34341
G01 X-93.60455 Y41.28222
G01 X-93.52145 Y41.14357
G01 X-93.48017 Y41.06620
G01 X-93.43313 Y40.96673
G01 X-93.43313 Y40.76726
G01 X-93.38606 Y40.66775
G01 X-93.34484 Y40.59051
G01 X-93.26170 Y40.45180
G01 X-93.22081 Y40.39051
G01 X-93.12635 Y40.26318
G01 X-93.08454 Y40.21222
G01 X-92.97910 Y40.09587
G01 X-92.93425 Y40.05101
G01 X-92.81792 Y39.94557
G01 X-92.76686 Y39.90369
G01 X-92.63951 Y39.80925
G01 X-92.57834 Y39.76843
G01 X-92.43968 Y39.68530
G01 X-92.36234 Y39.64405
G01 X-92.22927 Y39.58111
G01 X-91.82152 Y39.17331
G01 X-91.65736 Y39.17331
G01 X-91.23268 Y38.99742
G01 X-91.20248 Y38.98576
G01 X-91.13385 Y38.96120
G01 X-91.08094 Y38.94509
G01 X-91.01233 Y38.92792
G01 X-90.96532 Y38.91855
G01 X-90.89671 Y38.90837
G01 X-90.85305 Y38.90405
G01 X-90.78444 Y38.90069
G01 X-90.76313 Y38.90016
G01 X-88.02537 Y38.90016
G01 X-88.00406 Y38.89963
G01 X-87.93543 Y38.89627
G01 X-87.89176 Y38.89196
G01 X-87.82316 Y38.88177
G01 X-87.77614 Y38.87240
G01 X-87.70754 Y38.85523
G01 X-87.65463 Y38.83912
G01 X-87.58600 Y38.81456
G01 X-87.55580 Y38.80290
G01 X-87.13106 Y38.62698
G01 X-84.42698 Y38.62698
G01 X-82.75182 Y36.95185
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.45106 Y40.02698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.45106 Y40.02698
G01 X-80.74697 Y40.02698
G01 X-77.67182 Y36.95185
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.14373 Y35.38429 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.14373 Y35.38429
G01 X-76.14371 Y34.94901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-74.29372 Y34.40431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-74.29372 Y34.40431
G01 X-74.29370 Y33.17787
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.59893 Y34.40431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.59893 Y34.40431
G01 X-74.29372 Y34.40431
G01 X-74.05372 Y34.64431
G01 X-73.92872 Y34.89433
G01 X-73.92872 Y36.49435
G01 X-74.05372 Y36.74436
G01 X-74.23167 Y36.92229
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.66584 Y37.76547 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.66584 Y37.76547
G01 X-70.65614 Y37.75907
G01 X-70.64189 Y37.71197
G01 X-70.62982 Y37.65198
G01 X-70.62855 Y37.63862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.31225 Y37.76547 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.31225 Y37.76547
G01 X-70.45073 Y37.72346
G01 X-70.53947 Y37.68670
G01 X-70.62822 Y37.63928
G01 X-70.62855 Y37.63862
G01 X-70.65954 Y37.57860
G01 X-70.70592 Y37.49646
G01 X-70.77008 Y37.39938
G01 X-70.79871 Y37.36227
G01 X-70.80823 Y37.34959
G01 X-70.84097 Y37.30522
G01 X-70.87635 Y37.26102
G01 X-70.91021 Y37.22211
G01 X-70.93904 Y37.18284
G01 X-70.97704 Y37.12534
G01 X-71.01397 Y37.06295
G01 X-71.05088 Y36.98698
G01 X-71.07785 Y36.92371
G01 X-71.09063 Y36.88912
G01 X-71.12281 Y36.77347
G01 X-71.13803 Y36.70611
G01 X-71.13820 Y36.70502
G01 X-71.15227 Y36.54992
G01 X-71.15454 Y36.51548
G01 X-71.15227 Y36.48101
G01 X-71.13820 Y36.32595
G01 X-71.13803 Y36.32485
G01 X-71.12281 Y36.25749
G01 X-71.09063 Y36.14185
G01 X-71.07785 Y36.10723
G01 X-71.05083 Y36.04396
G01 X-71.01397 Y35.96799
G01 X-70.97701 Y35.90560
G01 X-70.93907 Y35.84815
G01 X-70.91024 Y35.80885
G01 X-70.83922 Y35.72719
G01 X-70.79147 Y35.67746
G01 X-70.78204 Y35.66852
G01 X-70.69784 Y35.60123
G01 X-70.67023 Y35.57799
G01 X-70.62235 Y35.53550
G01 X-70.61735 Y35.53110
G01 X-70.57986 Y35.49847
G01 X-70.49995 Y35.41813
G01 X-70.43864 Y35.34744
G01 X-70.39581 Y35.29491
G01 X-70.39172 Y35.28955
G01 X-70.30064 Y35.26194
G01 X-70.21781 Y35.24546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y35.28955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y35.28955
G01 X-70.38994 Y35.23408
G01 X-70.39228 Y35.20103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.78677 Y35.24546 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.78677 Y35.24546
G01 X-69.70402 Y35.26194
G01 X-69.61230 Y35.28988
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61283 Y35.20134 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61283 Y35.20134
G01 X-69.70402 Y35.22900
G01 X-69.78677 Y35.24546
G01 X-70.21781 Y35.24546
G01 X-70.30064 Y35.22900
G01 X-70.39215 Y35.20124
G01 X-70.39228 Y35.20103
G01 X-70.39231 Y35.20103
G01 X-70.43838 Y35.14294
G01 X-70.50008 Y35.07297
G01 X-70.56620 Y35.00593
G01 X-70.61301 Y34.96377
G01 X-70.61743 Y34.95983
G01 X-70.67023 Y34.91297
G01 X-70.69784 Y34.88973
G01 X-70.78202 Y34.82245
G01 X-70.79152 Y34.81348
G01 X-70.83922 Y34.76377
G01 X-70.91021 Y34.68211
G01 X-70.93904 Y34.64284
G01 X-70.97704 Y34.58534
G01 X-71.01397 Y34.52295
G01 X-71.05088 Y34.44698
G01 X-71.07785 Y34.38371
G01 X-71.09063 Y34.34912
G01 X-71.12281 Y34.23347
G01 X-71.13803 Y34.16611
G01 X-71.13820 Y34.16502
G01 X-71.15227 Y34.00992
G01 X-71.15454 Y33.97548
G01 X-71.15227 Y33.94101
G01 X-71.13820 Y33.78595
G01 X-71.13803 Y33.78485
G01 X-71.12281 Y33.71749
G01 X-71.09063 Y33.60185
G01 X-71.07785 Y33.56723
G01 X-71.05083 Y33.50396
G01 X-71.01397 Y33.42798
G01 X-70.97701 Y33.36560
G01 X-70.93907 Y33.30815
G01 X-70.91024 Y33.26885
G01 X-70.83922 Y33.18719
G01 X-70.79147 Y33.13746
G01 X-70.78204 Y33.12852
G01 X-70.69784 Y33.06123
G01 X-70.67023 Y33.03799
G01 X-70.62235 Y32.99550
G01 X-70.61735 Y32.99110
G01 X-70.57986 Y32.95847
G01 X-70.49995 Y32.87813
G01 X-70.43864 Y32.80744
G01 X-70.39581 Y32.75491
G01 X-70.39172 Y32.74955
G01 X-70.38994 Y32.69408
G01 X-70.39215 Y32.66124
G01 X-70.43838 Y32.60294
G01 X-70.50008 Y32.53297
G01 X-70.56620 Y32.46593
G01 X-70.61301 Y32.42377
G01 X-70.61743 Y32.41983
G01 X-70.67023 Y32.37297
G01 X-70.69784 Y32.34973
G01 X-70.78202 Y32.28244
G01 X-70.79152 Y32.27348
G01 X-70.83922 Y32.22377
G01 X-70.91021 Y32.14211
G01 X-70.93904 Y32.10284
G01 X-70.97704 Y32.04534
G01 X-71.01397 Y31.98295
G01 X-71.05088 Y31.90698
G01 X-71.07785 Y31.84371
G01 X-71.09063 Y31.80912
G01 X-71.12281 Y31.69347
G01 X-71.13803 Y31.62611
G01 X-71.13820 Y31.62502
G01 X-71.15227 Y31.46992
G01 X-71.15454 Y31.43548
G01 X-71.15227 Y31.40101
G01 X-71.13820 Y31.24595
G01 X-71.13803 Y31.24486
G01 X-71.12281 Y31.17749
G01 X-71.09063 Y31.06185
G01 X-71.07785 Y31.02723
G01 X-71.05083 Y30.96396
G01 X-71.01397 Y30.88798
G01 X-70.97701 Y30.82560
G01 X-70.93907 Y30.76815
G01 X-70.91024 Y30.72885
G01 X-70.83922 Y30.64719
G01 X-70.79147 Y30.59746
G01 X-70.78204 Y30.58852
G01 X-70.69784 Y30.52123
G01 X-70.67023 Y30.49799
G01 X-70.62235 Y30.45550
G01 X-70.61735 Y30.45111
G01 X-70.57986 Y30.41847
G01 X-70.49995 Y30.33813
G01 X-70.43864 Y30.26744
G01 X-70.39581 Y30.21491
G01 X-70.39172 Y30.20955
G01 X-70.30064 Y30.18194
G01 X-70.21781 Y30.16548
G01 X-69.78677 Y30.16548
G01 X-69.70402 Y30.18194
G01 X-69.61230 Y30.20988
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61283 Y30.12134 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61283 Y30.12134
G01 X-69.70402 Y30.14900
G01 X-69.78677 Y30.16548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.78677 Y27.62551 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.78677 Y27.62551
G01 X-69.70402 Y27.60900
G01 X-69.61283 Y27.58134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61230 Y27.66991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61230 Y27.66991
G01 X-69.70402 Y27.64197
G01 X-69.78677 Y27.62551
G01 X-70.21781 Y27.62546
G01 X-70.30064 Y27.60900
G01 X-70.39215 Y27.58124
G01 X-70.39228 Y27.58103
G01 X-70.39231 Y27.58103
G01 X-70.43838 Y27.52294
G01 X-70.50008 Y27.45299
G01 X-70.56627 Y27.38588
G01 X-70.61306 Y27.34375
G01 X-70.61743 Y27.33983
G01 X-70.67023 Y27.29297
G01 X-70.69782 Y27.26981
G01 X-70.78202 Y27.20250
G01 X-70.79152 Y27.19348
G01 X-70.83922 Y27.14377
G01 X-70.91021 Y27.06211
G01 X-70.93904 Y27.02287
G01 X-70.97704 Y26.96534
G01 X-71.01397 Y26.90298
G01 X-71.05088 Y26.82698
G01 X-71.07785 Y26.76371
G01 X-71.09063 Y26.72912
G01 X-71.12281 Y26.61347
G01 X-71.13803 Y26.54611
G01 X-71.13820 Y26.54502
G01 X-71.15227 Y26.38992
G01 X-71.15454 Y26.35548
G01 X-71.15227 Y26.32101
G01 X-71.13820 Y26.16595
G01 X-71.13803 Y26.16488
G01 X-71.12281 Y26.09749
G01 X-71.09063 Y25.98187
G01 X-71.07785 Y25.94723
G01 X-71.05083 Y25.88396
G01 X-71.01397 Y25.80801
G01 X-70.97701 Y25.74560
G01 X-70.93907 Y25.68815
G01 X-70.91021 Y25.64883
G01 X-70.83922 Y25.56722
G01 X-70.79147 Y25.51746
G01 X-70.78204 Y25.50852
G01 X-70.69784 Y25.44123
G01 X-70.67023 Y25.41799
G01 X-70.62243 Y25.37555
G01 X-70.61735 Y25.37113
G01 X-70.57996 Y25.33857
G01 X-70.49993 Y25.25815
G01 X-70.43864 Y25.18746
G01 X-70.39584 Y25.13494
G01 X-70.39172 Y25.12955
G01 X-70.30064 Y25.10194
G01 X-70.21781 Y25.08548
G01 X-69.78677 Y25.08548
G01 X-69.70402 Y25.10194
G01 X-69.61230 Y25.12988
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61283 Y25.04134 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61283 Y25.04134
G01 X-69.70402 Y25.06900
G01 X-69.78677 Y25.08548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.78677 Y22.54548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.78677 Y22.54548
G01 X-69.70402 Y22.52900
G01 X-69.61283 Y22.50134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61230 Y22.58988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61230 Y22.58988
G01 X-69.70402 Y22.56194
G01 X-69.78677 Y22.54548
G01 X-70.21781 Y22.54546
G01 X-70.30064 Y22.52900
G01 X-70.39215 Y22.50124
G01 X-70.39228 Y22.50103
G01 X-70.39231 Y22.50103
G01 X-70.43838 Y22.44294
G01 X-70.50008 Y22.37297
G01 X-70.56620 Y22.30593
G01 X-70.61301 Y22.26377
G01 X-70.61743 Y22.25983
G01 X-70.67023 Y22.21297
G01 X-70.69784 Y22.18973
G01 X-70.78202 Y22.12244
G01 X-70.79152 Y22.11348
G01 X-70.83922 Y22.06377
G01 X-70.91021 Y21.98211
G01 X-70.93904 Y21.94284
G01 X-70.97704 Y21.88534
G01 X-71.01397 Y21.82295
G01 X-71.05088 Y21.74698
G01 X-71.07785 Y21.68371
G01 X-71.09063 Y21.64912
G01 X-71.12281 Y21.53347
G01 X-71.13803 Y21.46611
G01 X-71.13820 Y21.46502
G01 X-71.15227 Y21.30992
G01 X-71.15454 Y21.27548
G01 X-71.15227 Y21.24101
G01 X-71.13820 Y21.08595
G01 X-71.13803 Y21.08486
G01 X-71.12281 Y21.01749
G01 X-71.09063 Y20.90185
G01 X-71.07785 Y20.86723
G01 X-71.05083 Y20.80396
G01 X-71.01397 Y20.72799
G01 X-70.97701 Y20.66560
G01 X-70.93907 Y20.60815
G01 X-70.91024 Y20.56885
G01 X-70.83922 Y20.48719
G01 X-70.79147 Y20.43746
G01 X-70.78204 Y20.42852
G01 X-70.69784 Y20.36123
G01 X-70.67023 Y20.33799
G01 X-70.62235 Y20.29550
G01 X-70.61735 Y20.29111
G01 X-70.57986 Y20.25847
G01 X-70.49995 Y20.17813
G01 X-70.43864 Y20.10744
G01 X-70.39581 Y20.05491
G01 X-70.39172 Y20.04955
G01 X-70.38994 Y19.99408
G01 X-70.39228 Y19.96103
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.39172 Y20.04955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.39172 Y20.04955
G01 X-70.30064 Y20.02194
G01 X-70.21781 Y20.00546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.78677 Y20.00548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.78677 Y20.00548
G01 X-69.70402 Y19.98900
G01 X-69.61283 Y19.96134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.61230 Y20.04988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.61230 Y20.04988
G01 X-69.70402 Y20.02194
G01 X-69.78677 Y20.00548
G01 X-70.21781 Y20.00546
G01 X-70.30064 Y19.98900
G01 X-70.39215 Y19.96124
G01 X-70.39228 Y19.96103
G01 X-70.39231 Y19.96103
G01 X-70.43838 Y19.90294
G01 X-70.50008 Y19.83297
G01 X-70.56620 Y19.76593
G01 X-70.61301 Y19.72377
G01 X-70.61743 Y19.71983
G01 X-70.67023 Y19.67297
G01 X-70.69784 Y19.64973
G01 X-70.78202 Y19.58245
G01 X-70.79152 Y19.57348
G01 X-70.83922 Y19.52377
G01 X-70.91021 Y19.44211
G01 X-70.93904 Y19.40284
G01 X-70.97704 Y19.34534
G01 X-71.01397 Y19.28295
G01 X-71.05088 Y19.20698
G01 X-71.07785 Y19.14371
G01 X-71.09063 Y19.10912
G01 X-71.12281 Y18.99347
G01 X-71.13803 Y18.92611
G01 X-71.13820 Y18.92502
G01 X-71.15227 Y18.76992
G01 X-71.15454 Y18.73548
G01 X-71.15227 Y18.70101
G01 X-71.13820 Y18.54595
G01 X-71.13803 Y18.54485
G01 X-71.12281 Y18.47749
G01 X-71.09063 Y18.36185
G01 X-71.07785 Y18.32723
G01 X-71.05083 Y18.26396
G01 X-71.01397 Y18.18798
G01 X-70.97701 Y18.12560
G01 X-70.93907 Y18.06815
G01 X-70.91024 Y18.02885
G01 X-70.83922 Y17.94719
G01 X-70.79147 Y17.89746
G01 X-70.78202 Y17.88849
G01 X-70.66967 Y17.79870
G01 X-70.63246 Y17.77092
G01 X-70.61268 Y17.75987
G01 X-70.47458 Y17.68560
G01 X-70.46505 Y17.68057
G01 X-70.41044 Y17.66038
G01 X-70.28484 Y17.61979
G01 X-70.26056 Y17.61410
G01 X-70.19276 Y17.60170
G01 X-70.09729 Y17.58903
G01 X-70.03673 Y17.58606
G01 X-69.96792 Y17.58606
G01 X-69.90732 Y17.58903
G01 X-69.81187 Y17.60170
G01 X-69.74405 Y17.61410
G01 X-69.71977 Y17.61979
G01 X-69.59421 Y17.66038
G01 X-69.53958 Y17.68057
G01 X-69.53008 Y17.68560
G01 X-69.39198 Y17.75987
G01 X-69.37214 Y17.77094
G01 X-69.33498 Y17.79868
G01 X-69.22261 Y17.88849
G01 X-69.21314 Y17.89746
G01 X-69.16539 Y17.94719
G01 X-69.09442 Y18.02885
G01 X-69.06559 Y18.06815
G01 X-69.02764 Y18.12555
G01 X-68.99066 Y18.18798
G01 X-68.95378 Y18.26391
G01 X-68.92678 Y18.32728
G01 X-68.91400 Y18.36185
G01 X-68.88179 Y18.47754
G01 X-68.86663 Y18.54483
G01 X-68.86643 Y18.54592
G01 X-68.85238 Y18.70101
G01 X-68.85012 Y18.73548
G01 X-68.85238 Y18.76992
G01 X-68.86643 Y18.92504
G01 X-68.86663 Y18.92611
G01 X-68.88179 Y18.99342
G01 X-68.91398 Y19.10899
G01 X-68.91667 Y19.11630
G01 X-68.92678 Y19.14366
G01 X-68.95378 Y19.20701
G01 X-68.99066 Y19.28295
G01 X-69.02764 Y19.34539
G01 X-69.06561 Y19.40284
G01 X-69.09444 Y19.44211
G01 X-69.16544 Y19.52377
G01 X-69.21314 Y19.57350
G01 X-69.22264 Y19.58247
G01 X-69.30676 Y19.64970
G01 X-69.33437 Y19.67297
G01 X-69.38230 Y19.71549
G01 X-69.38723 Y19.71983
G01 X-69.42480 Y19.75255
G01 X-69.50463 Y19.83284
G01 X-69.56604 Y19.90363
G01 X-69.60834 Y19.95544
G01 X-69.61283 Y19.96134
G01 X-69.61471 Y20.01666
G01 X-69.61230 Y20.04988
G01 X-69.56620 Y20.10810
G01 X-69.50463 Y20.17795
G01 X-69.43823 Y20.24521
G01 X-69.39134 Y20.28740
G01 X-69.38725 Y20.29105
G01 X-69.33437 Y20.33797
G01 X-69.30686 Y20.36116
G01 X-69.22259 Y20.42852
G01 X-69.21314 Y20.43746
G01 X-69.16539 Y20.48719
G01 X-69.09442 Y20.56885
G01 X-69.06559 Y20.60815
G01 X-69.02764 Y20.66555
G01 X-68.99066 Y20.72799
G01 X-68.95378 Y20.80391
G01 X-68.92678 Y20.86728
G01 X-68.91400 Y20.90185
G01 X-68.88179 Y21.01755
G01 X-68.86663 Y21.08483
G01 X-68.86643 Y21.08592
G01 X-68.85238 Y21.24101
G01 X-68.85012 Y21.27548
G01 X-68.85238 Y21.30992
G01 X-68.86643 Y21.46502
G01 X-68.86663 Y21.46611
G01 X-68.88179 Y21.53342
G01 X-68.91403 Y21.64917
G01 X-68.92678 Y21.68366
G01 X-68.95378 Y21.74701
G01 X-68.99066 Y21.82295
G01 X-69.02764 Y21.88539
G01 X-69.04819 Y21.91800
G01 X-69.06561 Y21.94284
G01 X-69.09444 Y21.98211
G01 X-69.13026 Y22.02333
G01 X-69.16544 Y22.06377
G01 X-69.21314 Y22.11350
G01 X-69.22261 Y22.12244
G01 X-69.30676 Y22.18970
G01 X-69.33437 Y22.21297
G01 X-69.38230 Y22.25549
G01 X-69.38723 Y22.25983
G01 X-69.42480 Y22.29255
G01 X-69.50463 Y22.37284
G01 X-69.56604 Y22.44363
G01 X-69.60834 Y22.49544
G01 X-69.61283 Y22.50134
G01 X-69.61471 Y22.55666
G01 X-69.61230 Y22.58988
G01 X-69.56620 Y22.64810
G01 X-69.50463 Y22.71795
G01 X-69.43823 Y22.78521
G01 X-69.39134 Y22.82740
G01 X-69.38725 Y22.83105
G01 X-69.33437 Y22.87797
G01 X-69.30676 Y22.90123
G01 X-69.22266 Y22.96842
G01 X-69.21314 Y22.97746
G01 X-69.16539 Y23.02719
G01 X-69.09442 Y23.10885
G01 X-69.06559 Y23.14815
G01 X-69.02764 Y23.20555
G01 X-68.99066 Y23.26798
G01 X-68.95378 Y23.34391
G01 X-68.92678 Y23.40728
G01 X-68.91400 Y23.44182
G01 X-68.88439 Y23.54830
G01 X-68.88179 Y23.55754
G01 X-68.86663 Y23.62483
G01 X-68.86643 Y23.62597
G01 X-68.85238 Y23.78101
G01 X-68.85012 Y23.81548
G01 X-68.85238 Y23.84992
G01 X-68.86643 Y24.00502
G01 X-68.86663 Y24.00611
G01 X-68.88179 Y24.07342
G01 X-68.91403 Y24.18919
G01 X-68.92678 Y24.22366
G01 X-68.95378 Y24.28701
G01 X-68.98314 Y24.34746
G01 X-68.99068 Y24.36300
G01 X-69.02472 Y24.42043
G01 X-69.02764 Y24.42539
G01 X-69.06561 Y24.48284
G01 X-69.08946 Y24.51538
G01 X-69.09437 Y24.52206
G01 X-69.16544 Y24.60377
G01 X-69.21314 Y24.65353
G01 X-69.22266 Y24.66247
G01 X-69.30674 Y24.72973
G01 X-69.33437 Y24.75297
G01 X-69.38230 Y24.79549
G01 X-69.38723 Y24.79983
G01 X-69.42480 Y24.83255
G01 X-69.50463 Y24.91284
G01 X-69.56604 Y24.98363
G01 X-69.60834 Y25.03544
G01 X-69.61283 Y25.04134
G01 X-69.61471 Y25.09666
G01 X-69.61230 Y25.12988
G01 X-69.56620 Y25.18810
G01 X-69.50463 Y25.25797
G01 X-69.43823 Y25.32521
G01 X-69.39134 Y25.36742
G01 X-69.38725 Y25.37105
G01 X-69.33437 Y25.41797
G01 X-69.30676 Y25.44121
G01 X-69.22264 Y25.50849
G01 X-69.21314 Y25.51746
G01 X-69.16539 Y25.56722
G01 X-69.09444 Y25.64883
G01 X-69.06559 Y25.68815
G01 X-69.02767 Y25.74558
G01 X-68.99066 Y25.80804
G01 X-68.95378 Y25.88391
G01 X-68.92678 Y25.94730
G01 X-68.91400 Y25.98187
G01 X-68.88456 Y26.08764
G01 X-68.88179 Y26.09757
G01 X-68.86663 Y26.16486
G01 X-68.86643 Y26.16595
G01 X-68.85238 Y26.32101
G01 X-68.85012 Y26.35548
G01 X-68.85238 Y26.38992
G01 X-68.86643 Y26.54504
G01 X-68.86663 Y26.54611
G01 X-68.88179 Y26.61342
G01 X-68.91400 Y26.72912
G01 X-68.92678 Y26.76366
G01 X-68.95378 Y26.82701
G01 X-68.99074 Y26.90311
G01 X-68.99503 Y26.91035
G01 X-69.02764 Y26.96541
G01 X-69.06561 Y27.02287
G01 X-69.06958 Y27.02823
G01 X-69.09447 Y27.06216
G01 X-69.16544 Y27.14377
G01 X-69.21314 Y27.19350
G01 X-69.22261 Y27.20247
G01 X-69.30676 Y27.26970
G01 X-69.33437 Y27.29297
G01 X-69.38230 Y27.33549
G01 X-69.38723 Y27.33983
G01 X-69.42480 Y27.37255
G01 X-69.50463 Y27.45284
G01 X-69.56604 Y27.52365
G01 X-69.60834 Y27.57549
G01 X-69.61283 Y27.58134
G01 X-69.61471 Y27.63666
G01 X-69.61230 Y27.66991
G01 X-69.56620 Y27.72810
G01 X-69.50463 Y27.79797
G01 X-69.43821 Y27.86523
G01 X-69.38728 Y27.91105
G01 X-69.33437 Y27.95799
G01 X-69.30674 Y27.98126
G01 X-69.22261 Y28.04852
G01 X-69.21314 Y28.05746
G01 X-69.16539 Y28.10719
G01 X-69.09442 Y28.18885
G01 X-69.06559 Y28.22817
G01 X-69.02764 Y28.28555
G01 X-68.99066 Y28.34798
G01 X-68.95378 Y28.42393
G01 X-68.92678 Y28.48728
G01 X-68.91400 Y28.52185
G01 X-68.88179 Y28.63754
G01 X-68.87778 Y28.65263
G01 X-68.86663 Y28.70483
G01 X-68.86643 Y28.70595
G01 X-68.85238 Y28.86101
G01 X-68.85012 Y28.89548
G01 X-68.85238 Y28.92992
G01 X-68.86643 Y29.08502
G01 X-68.86663 Y29.08613
G01 X-68.88179 Y29.15344
G01 X-68.90902 Y29.25118
G01 X-68.91403 Y29.26919
G01 X-68.92678 Y29.30366
G01 X-68.95378 Y29.36701
G01 X-68.99063 Y29.44293
G01 X-69.02764 Y29.50539
G01 X-69.06071 Y29.55606
G01 X-69.06561 Y29.56284
G01 X-69.09444 Y29.60214
G01 X-69.16544 Y29.68377
G01 X-69.21314 Y29.73348
G01 X-69.22266 Y29.74247
G01 X-69.30676 Y29.80973
G01 X-69.33437 Y29.83297
G01 X-69.38230 Y29.87549
G01 X-69.38723 Y29.87983
G01 X-69.42480 Y29.91255
G01 X-69.50463 Y29.99284
G01 X-69.56604 Y30.06363
G01 X-69.60834 Y30.11544
G01 X-69.61283 Y30.12134
G01 X-69.61471 Y30.17666
G01 X-69.61230 Y30.20988
G01 X-69.56620 Y30.26810
G01 X-69.50463 Y30.33795
G01 X-69.43823 Y30.40521
G01 X-69.39134 Y30.44740
G01 X-69.38725 Y30.45105
G01 X-69.33437 Y30.49797
G01 X-69.30676 Y30.52121
G01 X-69.25362 Y30.56370
G01 X-69.22264 Y30.58849
G01 X-69.21314 Y30.59746
G01 X-69.16539 Y30.64719
G01 X-69.09442 Y30.72885
G01 X-69.06559 Y30.76815
G01 X-69.02764 Y30.82555
G01 X-68.99066 Y30.88798
G01 X-68.95378 Y30.96391
G01 X-68.92678 Y31.02728
G01 X-68.91400 Y31.06182
G01 X-68.88134 Y31.17920
G01 X-68.86663 Y31.24483
G01 X-68.86643 Y31.24597
G01 X-68.85238 Y31.40101
G01 X-68.85012 Y31.43548
G01 X-68.85238 Y31.46992
G01 X-68.86643 Y31.62504
G01 X-68.86663 Y31.62611
G01 X-68.88179 Y31.69342
G01 X-68.91400 Y31.80912
G01 X-68.92678 Y31.84366
G01 X-68.95378 Y31.90701
G01 X-68.99066 Y31.98293
G01 X-69.02764 Y32.04539
G01 X-69.06561 Y32.10284
G01 X-69.09442 Y32.14211
G01 X-69.16544 Y32.22377
G01 X-69.19297 Y32.25367
G01 X-69.21314 Y32.27350
G01 X-69.22264 Y32.28247
G01 X-69.30676 Y32.34970
G01 X-69.33437 Y32.37297
G01 X-69.38230 Y32.41549
G01 X-69.38723 Y32.41983
G01 X-69.42480 Y32.45255
G01 X-69.50463 Y32.53284
G01 X-69.56604 Y32.60363
G01 X-69.60834 Y32.65544
G01 X-69.61283 Y32.66134
G01 X-69.61471 Y32.71666
G01 X-69.61230 Y32.74988
G01 X-69.56620 Y32.80810
G01 X-69.50463 Y32.87795
G01 X-69.43823 Y32.94521
G01 X-69.39134 Y32.98740
G01 X-69.38725 Y32.99105
G01 X-69.33437 Y33.03797
G01 X-69.30676 Y33.06121
G01 X-69.25362 Y33.10370
G01 X-69.22264 Y33.12849
G01 X-69.21314 Y33.13746
G01 X-69.16539 Y33.18719
G01 X-69.09442 Y33.26885
G01 X-69.06559 Y33.30815
G01 X-69.02764 Y33.36555
G01 X-68.99066 Y33.42798
G01 X-68.95378 Y33.50391
G01 X-68.92678 Y33.56728
G01 X-68.91400 Y33.60185
G01 X-68.88179 Y33.71755
G01 X-68.87130 Y33.76062
G01 X-68.86663 Y33.78483
G01 X-68.86643 Y33.78597
G01 X-68.85238 Y33.94101
G01 X-68.85012 Y33.97548
G01 X-68.85238 Y34.00992
G01 X-68.86643 Y34.16502
G01 X-68.86663 Y34.16611
G01 X-68.88179 Y34.23342
G01 X-68.90732 Y34.32511
G01 X-68.91400 Y34.34914
G01 X-68.92678 Y34.38366
G01 X-68.95378 Y34.44701
G01 X-68.99066 Y34.52298
G01 X-68.99462 Y34.52968
G01 X-69.02764 Y34.58539
G01 X-69.06561 Y34.64284
G01 X-69.09444 Y34.68214
G01 X-69.13546 Y34.72933
G01 X-69.16544 Y34.76377
G01 X-69.21314 Y34.81350
G01 X-69.22261 Y34.82245
G01 X-69.30676 Y34.88970
G01 X-69.33437 Y34.91297
G01 X-69.38230 Y34.95549
G01 X-69.38723 Y34.95983
G01 X-69.42480 Y34.99255
G01 X-69.50463 Y35.07284
G01 X-69.56604 Y35.14363
G01 X-69.60834 Y35.19544
G01 X-69.61283 Y35.20134
G01 X-69.61471 Y35.25666
G01 X-69.61230 Y35.28988
G01 X-69.56620 Y35.34810
G01 X-69.50463 Y35.41795
G01 X-69.43823 Y35.48521
G01 X-69.39134 Y35.52740
G01 X-69.38725 Y35.53105
G01 X-69.33437 Y35.57797
G01 X-69.30676 Y35.60121
G01 X-69.22256 Y35.66854
G01 X-69.21880 Y35.67210
G01 X-69.21311 Y35.67741
G01 X-69.19348 Y35.69552
G01 X-69.17925 Y35.70903
G01 X-69.16285 Y35.72508
G01 X-69.08319 Y35.79245
G01 X-69.05853 Y35.79676
G01 X-68.99734 Y35.80644
G01 X-68.88644 Y35.81523
G01 X-67.04779 Y35.81523
G01 X-67.01317 Y35.81437
G01 X-66.99358 Y35.81340
G01 X-66.85127 Y35.79196
G01 X-66.84568 Y35.78729
G01 X-66.79798 Y35.74728
G01 X-66.77212 Y35.72450
G01 X-66.72114 Y35.67741
G01 X-66.71563 Y35.67228
G01 X-66.71175 Y35.66860
G01 X-66.59927 Y35.57868
G01 X-66.56206 Y35.55094
G01 X-66.54228 Y35.53987
G01 X-66.40418 Y35.46560
G01 X-66.39465 Y35.46057
G01 X-66.34002 Y35.44038
G01 X-66.21439 Y35.39979
G01 X-66.19016 Y35.39410
G01 X-66.12236 Y35.38170
G01 X-66.02691 Y35.36903
G01 X-65.96633 Y35.36606
G01 X-65.95808 Y35.36570
G01 X-65.93054 Y35.36468
G01 X-65.91500 Y35.36428
G01 X-65.89732 Y35.36400
G01 X-65.79303 Y35.35488
G01 X-65.77522 Y35.34233
G01 X-65.72511 Y35.30593
G01 X-65.64040 Y35.23365
G01 X-65.12673 Y34.71998
G01 X-65.08142 Y34.67010
G01 X-65.05737 Y34.64094
G01 X-64.95445 Y34.47670
G01 X-64.92691 Y34.41775
G01 X-64.89120 Y34.28681
G01 X-64.40565 Y33.80131
G01 X-64.23365 Y33.73007
G01 X-64.19194 Y33.68834
G01 X-64.00342 Y33.31135
G01 X-64.00342 Y31.51130
G01 X-64.03116 Y31.36667
G01 X-64.03654 Y31.36170
G01 X-64.07837 Y31.32766
G01 X-64.11383 Y31.30231
G01 X-64.16194 Y31.27208
G01 X-64.19194 Y31.25555
G01 X-64.21061 Y31.24478
G01 X-64.21934 Y31.23955
G01 X-64.23067 Y31.19439
G01 X-64.24066 Y31.14425
G01 X-64.24866 Y31.09035
G01 X-64.25330 Y31.04328
G01 X-64.25595 Y30.98938
G01 X-64.25651 Y30.96634
G01 X-64.25651 Y29.71633
G01 X-64.25595 Y29.69327
G01 X-64.25330 Y29.63937
G01 X-64.24866 Y29.59231
G01 X-64.24066 Y29.53841
G01 X-64.23067 Y29.48827
G01 X-64.21716 Y29.43437
G01 X-64.20037 Y29.37915
G01 X-64.18109 Y29.32525
G01 X-64.15651 Y29.26564
G01 X-64.15651 Y28.85248
G01 X-64.15572 Y28.81956
G01 X-64.15234 Y28.75096
G01 X-64.14571 Y28.68395
G01 X-64.13555 Y28.61537
G01 X-64.13207 Y28.59416
G01 X-64.10190 Y28.55469
G01 X-64.06258 Y28.50676
G01 X-64.05757 Y28.50061
G01 X-64.02158 Y28.45568
G01 X-64.01673 Y28.44971
G01 X-63.97319 Y28.39668
G01 X-63.95214 Y28.37229
G01 X-63.91968 Y28.33645
G01 X-63.87789 Y28.28548
G01 X-63.78343 Y28.15815
G01 X-63.74251 Y28.09686
G01 X-63.65940 Y27.95817
G01 X-63.61818 Y27.88090
G01 X-63.57114 Y27.78144
G01 X-63.57111 Y27.72800
G01 X-63.57111 Y27.46610
G01 X-63.55468 Y27.38334
G01 X-63.50914 Y27.23331
G01 X-63.47238 Y27.14456
G01 X-63.42915 Y27.06368
G01 X-63.35821 Y27.02769
G01 X-63.27972 Y26.98002
G01 X-63.23182 Y26.94862
G01 X-63.18000 Y26.91200
G01 X-63.14622 Y26.88670
G01 X-63.09098 Y26.84283
G01 X-63.08915 Y26.84136
G01 X-62.96847 Y26.74491
G01 X-62.93129 Y26.71718
G01 X-62.91152 Y26.70610
G01 X-62.77340 Y26.63181
G01 X-62.76385 Y26.62678
G01 X-62.70919 Y26.60656
G01 X-62.58366 Y26.56597
G01 X-62.55935 Y26.56031
G01 X-62.49159 Y26.54791
G01 X-62.39613 Y26.53529
G01 X-62.33553 Y26.53229
G01 X-62.26672 Y26.53229
G01 X-62.20612 Y26.53529
G01 X-62.11066 Y26.54791
G01 X-62.04290 Y26.56031
G01 X-62.01859 Y26.56597
G01 X-61.89306 Y26.60656
G01 X-61.83835 Y26.62680
G01 X-61.82885 Y26.63181
G01 X-61.78270 Y26.65665
G01 X-61.69072 Y26.70610
G01 X-61.67096 Y26.71715
G01 X-61.63378 Y26.74491
G01 X-61.52143 Y26.83468
G01 X-61.51193 Y26.84370
G01 X-61.46421 Y26.89343
G01 X-61.39324 Y26.97506
G01 X-61.36438 Y27.01436
G01 X-61.32646 Y27.07176
G01 X-61.28945 Y27.13422
G01 X-61.25260 Y27.21012
G01 X-61.25189 Y27.21156
G01 X-61.22245 Y27.27255
G01 X-61.21552 Y27.28649
G01 X-61.19431 Y27.32812
G01 X-61.14412 Y27.41266
G01 X-61.09540 Y27.48413
G01 X-61.06665 Y27.52416
G01 X-61.02339 Y27.58136
G01 X-61.01798 Y27.58812
G01 X-61.01351 Y27.63364
G01 X-61.01351 Y27.72970
G01 X-61.02222 Y27.81837
G01 X-61.02237 Y27.81855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.01839 Y27.58761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.01839 Y27.58761
G01 X-60.92621 Y27.61309
G01 X-60.82395 Y27.61921
G01 X-60.72268 Y27.60394
G01 X-60.66345 Y27.58855
G01 X-60.56749 Y27.55256
G01 X-60.48115 Y27.49736
G01 X-60.40815 Y27.42546
G01 X-60.36931 Y27.37824
G01 X-60.32532 Y27.31520
G01 X-60.29172 Y27.24608
G01 X-60.25890 Y27.16249
G01 X-60.16073 Y26.99244
G01 X-60.03830 Y26.83895
G01 X-59.91534 Y26.72485
G01 X-59.91534 Y26.75802
G01 X-59.95187 Y26.78802
G01 X-60.01979 Y26.85591
G01 X-60.11928 Y26.97717
G01 X-60.17264 Y27.05706
G01 X-60.24658 Y27.19533
G01 X-60.28334 Y27.28408
G01 X-60.32888 Y27.43414
G01 X-60.34760 Y27.52835
G01 X-60.36299 Y27.68444
G01 X-60.36299 Y27.78050
G01 X-60.34760 Y27.93656
G01 X-60.32888 Y28.03079
G01 X-60.28334 Y28.18088
G01 X-60.24658 Y28.26963
G01 X-60.17264 Y28.40790
G01 X-60.11928 Y28.48776
G01 X-60.01979 Y28.60900
G01 X-59.95187 Y28.67691
G01 X-59.91534 Y28.70691
G01 X-59.91534 Y28.74011
G01 X-60.03830 Y28.62601
G01 X-60.16073 Y28.47252
G01 X-60.25890 Y28.30244
G01 X-60.31275 Y28.16528
G01 X-60.36683 Y28.06419
G01 X-60.39314 Y28.02642
G01 X-60.45085 Y27.95792
G01 X-60.52006 Y27.90105
G01 X-60.59847 Y27.85776
G01 X-60.65451 Y27.83318
G01 X-60.70421 Y27.81733
G01 X-60.75199 Y27.80211
G01 X-60.85384 Y27.79195
G01 X-60.95555 Y27.80321
G01 X-61.01534 Y27.81624
G01 X-61.02237 Y27.81855
G01 X-61.02240 Y27.81857
G01 X-61.07399 Y27.88134
G01 X-61.12966 Y27.95507
G01 X-61.18973 Y28.04666
G01 X-61.21564 Y28.09287
G01 X-61.22042 Y28.10125
G01 X-61.25097 Y28.15411
G01 X-61.27485 Y28.19906
G01 X-61.28951 Y28.22921
G01 X-61.32644 Y28.29160
G01 X-61.36438 Y28.34900
G01 X-61.39324 Y28.38832
G01 X-61.45605 Y28.46058
G01 X-61.46421 Y28.46996
G01 X-61.51193 Y28.51969
G01 X-61.52143 Y28.52871
G01 X-61.63378 Y28.61847
G01 X-61.67096 Y28.64623
G01 X-61.69077 Y28.65733
G01 X-61.82887 Y28.73158
G01 X-61.83837 Y28.73658
G01 X-61.89301 Y28.75677
G01 X-62.01859 Y28.79736
G01 X-62.04284 Y28.80308
G01 X-62.11066 Y28.81550
G01 X-62.20617 Y28.82812
G01 X-62.21198 Y28.82840
G01 X-62.24071 Y28.83041
G01 X-62.25717 Y28.83188
G01 X-62.26657 Y28.83279
G01 X-62.33642 Y28.84003
G01 X-62.40284 Y28.84994
G01 X-62.43502 Y28.85619
G01 X-62.45930 Y28.87402
G01 X-62.62529 Y29.04179
G01 X-62.66146 Y29.09213
G01 X-62.70992 Y29.16813
G01 X-62.71526 Y29.23399
G01 X-62.70045 Y29.27412
G01 X-62.67911 Y29.32634
G01 X-62.67805 Y29.32873
G01 X-62.65470 Y29.38679
G01 X-62.65199 Y29.39441
G01 X-62.63197 Y29.44486
G01 X-62.61490 Y29.48354
G01 X-62.60680 Y29.50917
G01 X-62.59156 Y29.56089
G01 X-62.57947 Y29.60793
G01 X-62.57726 Y29.62822
G01 X-62.57647 Y29.63650
G01 X-62.57284 Y29.67536
G01 X-62.57251 Y29.68192
G01 X-62.57167 Y29.71633
G01 X-62.57167 Y30.71181
G01 X-62.56949 Y30.76700
G01 X-62.56705 Y30.79799
G01 X-62.53370 Y30.96634
G01 X-62.53205 Y30.97158
G01 X-62.52202 Y31.00571
G01 X-62.51427 Y31.03426
G01 X-62.50642 Y31.06142
G01 X-62.50048 Y31.08090
G01 X-62.47693 Y31.09060
G01 X-62.29466 Y31.14257
G01 X-62.23347 Y31.15227
G01 X-62.12242 Y31.16106
G01 X-61.92694 Y31.16106
G01 X-61.89253 Y31.16192
G01 X-61.88592 Y31.16225
G01 X-61.83883 Y31.16665
G01 X-61.81849 Y31.16886
G01 X-61.78252 Y31.17780
G01 X-61.77134 Y31.18100
G01 X-61.71963 Y31.19626
G01 X-61.69441 Y31.20421
G01 X-61.65641 Y31.22283
G01 X-61.60873 Y31.24803
G01 X-61.58196 Y31.26291
G01 X-61.55153 Y31.28646
G01 X-61.50980 Y31.32060
G01 X-61.48369 Y31.34305
G01 X-61.46118 Y31.36924
G01 X-61.42705 Y31.41095
G01 X-61.40353 Y31.44137
G01 X-61.38869 Y31.46799
G01 X-61.36350 Y31.51567
G01 X-61.35207 Y31.53833
G01 X-61.34483 Y31.55374
G01 X-61.33683 Y31.57917
G01 X-61.32159 Y31.63088
G01 X-61.30944 Y31.67795
G01 X-61.30726 Y31.69822
G01 X-61.30284 Y31.74536
G01 X-61.30251 Y31.75192
G01 X-61.30167 Y31.78633
G01 X-61.30167 Y33.03634
G01 X-61.30251 Y33.07073
G01 X-61.30284 Y33.07731
G01 X-61.30726 Y33.12443
G01 X-61.30947 Y33.14475
G01 X-61.31061 Y33.14983
G01 X-61.32143 Y33.19730
G01 X-61.32349 Y33.20667
G01 X-61.32476 Y33.22461
G01 X-61.32649 Y33.27368
G01 X-61.32649 Y34.43316
G01 X-61.32646 Y34.43857
G01 X-61.32644 Y34.44023
G01 X-61.31671 Y34.55171
G01 X-61.30650 Y34.61290
G01 X-61.21917 Y34.86720
G01 X-61.18737 Y34.92839
G01 X-61.18674 Y34.92958
G01 X-61.18669 Y34.98287
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.86693 Y33.70416 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.86693 Y33.70416
G01 X-59.86693 Y33.73291
G01 X-59.93939 Y33.67381
G01 X-60.00498 Y33.59339
G01 X-60.05298 Y33.50149
G01 X-60.08237 Y33.39875
G01 X-60.08692 Y33.34757
G01 X-60.08692 Y33.25133
G01 X-60.06693 Y33.25133
G01 X-60.06693 Y33.31132
G01 X-60.05753 Y33.40690
G01 X-60.02964 Y33.49883
G01 X-59.98435 Y33.58353
G01 X-59.92342 Y33.65780
G01 X-59.86693 Y33.70416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.14752 Y34.95127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.14752 Y34.95127
G01 X-61.18674 Y34.92958
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.86654 Y34.63756 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.86654 Y34.63756
G01 X-62.87017 Y34.64157
G01 X-62.87132 Y34.64208
G01 X-62.87472 Y34.64363
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.40565 Y33.80131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.40565 Y33.80131
G01 X-65.29194 Y33.80131
G01 X-65.38754 Y33.79189
G01 X-65.47946 Y33.76400
G01 X-65.56417 Y33.71874
G01 X-65.63842 Y33.65780
G01 X-65.69935 Y33.58353
G01 X-65.74464 Y33.49883
G01 X-65.77253 Y33.40690
G01 X-65.78193 Y33.31132
G01 X-65.78193 Y33.25133
G01 X-65.80192 Y33.25133
G01 X-65.80192 Y33.34757
G01 X-65.79737 Y33.39875
G01 X-65.76798 Y33.50149
G01 X-65.71998 Y33.59339
G01 X-65.65439 Y33.67381
G01 X-65.57403 Y33.73936
G01 X-65.48208 Y33.78737
G01 X-65.37057 Y33.81930
G01 X-65.31640 Y33.82844
G01 X-65.24360 Y33.85290
G01 X-65.18731 Y33.87688
G01 X-65.09775 Y33.92669
G01 X-65.02054 Y33.99400
G01 X-64.95899 Y34.07591
G01 X-64.92755 Y34.12842
G01 X-64.88437 Y34.22135
G01 X-64.87934 Y34.24327
G01 X-64.89120 Y34.28681
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.50048 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.50048 Y31.08090
G01 X-62.51775 Y31.09672
G01 X-62.55824 Y31.13188
G01 X-62.56768 Y31.13965
G01 X-62.60660 Y31.17356
G01 X-62.62859 Y31.19393
G01 X-62.66105 Y31.22225
G01 X-62.67327 Y31.23228
G01 X-62.70487 Y31.25997
G01 X-62.72003 Y31.27414
G01 X-62.74876 Y31.29929
G01 X-62.76194 Y31.31011
G01 X-62.79024 Y31.33495
G01 X-62.80281 Y31.34676
G01 X-62.83012 Y31.37074
G01 X-62.84327 Y31.38153
G01 X-62.84355 Y31.38214
G01 X-62.86476 Y31.43317
G01 X-62.88404 Y31.48707
G01 X-62.89740 Y31.53096
G01 X-62.91089 Y31.58488
G01 X-62.91874 Y31.62415
G01 X-62.92674 Y31.67805
G01 X-62.93035 Y31.71458
G01 X-62.93299 Y31.76848
G01 X-62.93342 Y31.78633
G01 X-62.93342 Y33.03634
G01 X-62.93299 Y33.05417
G01 X-62.93035 Y33.10807
G01 X-62.92674 Y33.14460
G01 X-62.91874 Y33.19850
G01 X-62.91089 Y33.23776
G01 X-62.89740 Y33.29169
G01 X-62.88407 Y33.33550
G01 X-62.86479 Y33.38943
G01 X-62.84350 Y33.44063
G01 X-62.81800 Y33.49456
G01 X-62.78511 Y33.55590
G01 X-62.75277 Y33.60980
G01 X-62.74581 Y33.62120
G01 X-62.74581 Y34.04846
G01 X-62.74670 Y34.08475
G01 X-62.75008 Y34.15338
G01 X-62.75737 Y34.22725
G01 X-62.76756 Y34.29585
G01 X-62.78313 Y34.37398
G01 X-62.80030 Y34.44259
G01 X-62.82636 Y34.52821
G01 X-62.85092 Y34.59684
G01 X-62.86654 Y34.63756
G01 X-62.86672 Y34.63804
G01 X-62.86672 Y34.64363
G01 X-62.87475 Y34.64363
G01 X-62.90172 Y34.65585
G01 X-63.05232 Y34.72707
G01 X-63.12636 Y34.76656
G01 X-63.26502 Y34.84970
G01 X-63.32331 Y34.88861
G01 X-63.45064 Y34.98305
G01 X-63.49905 Y35.02277
G01 X-63.61541 Y35.12821
G01 X-63.65798 Y35.17078
G01 X-63.76341 Y35.28714
G01 X-63.80312 Y35.33552
G01 X-63.89755 Y35.46286
G01 X-63.93654 Y35.52125
G01 X-64.01968 Y35.65993
G01 X-64.05912 Y35.73390
G01 X-64.13034 Y35.88444
G01 X-64.14259 Y35.91343
G01 X-64.14259 Y35.97929
G01 X-64.14099 Y35.99549
G01 X-64.04871 Y36.12762
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.20875 Y35.97903 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.20875 Y35.97903
G01 X-64.20700 Y35.97848
G01 X-64.14304 Y35.91454
G01 X-64.14259 Y35.91348
G01 X-64.13034 Y35.88444
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.58493 Y36.14667 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.58493 Y36.14667
G01 X-61.60142 Y36.22958
G01 X-61.63164 Y36.32925
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.53815 Y36.32935 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.53815 Y36.32935
G01 X-61.56847 Y36.22958
G01 X-61.58493 Y36.14667
G01 X-61.58493 Y35.83156
G01 X-61.53787 Y35.73204
G01 X-61.49664 Y35.65480
G01 X-61.48854 Y35.64126
G01 X-61.46840 Y35.60573
G01 X-61.43540 Y35.54403
G01 X-61.42021 Y35.51406
G01 X-61.40188 Y35.47594
G01 X-61.38722 Y35.44701
G01 X-61.37015 Y35.41510
G01 X-61.33830 Y35.34774
G01 X-61.32052 Y35.30482
G01 X-61.31160 Y35.28414
G01 X-61.28887 Y35.23342
G01 X-61.27929 Y35.21122
G01 X-61.25184 Y35.14495
G01 X-61.23568 Y35.10306
G01 X-61.22771 Y35.08074
G01 X-61.18961 Y34.98904
G01 X-61.18669 Y34.98287
G01 X-61.14831 Y34.95138
G01 X-61.03010 Y34.93621
G01 X-60.94475 Y34.91924
G01 X-60.89992 Y34.90898
G01 X-60.83901 Y34.89318
G01 X-60.78882 Y34.87827
G01 X-60.73111 Y34.85884
G01 X-60.72303 Y34.85618
G01 X-60.59746 Y34.81559
G01 X-60.57320 Y34.80990
G01 X-60.50538 Y34.79750
G01 X-60.40990 Y34.78483
G01 X-60.34932 Y34.78186
G01 X-60.28052 Y34.78186
G01 X-60.21994 Y34.78483
G01 X-60.12448 Y34.79750
G01 X-60.05669 Y34.80990
G01 X-60.03238 Y34.81559
G01 X-59.90681 Y34.85618
G01 X-59.85215 Y34.87639
G01 X-59.84267 Y34.88140
G01 X-59.70457 Y34.95567
G01 X-59.68489 Y34.96664
G01 X-59.64757 Y34.99450
G01 X-59.53523 Y35.08429
G01 X-59.52576 Y35.09326
G01 X-59.47800 Y35.14299
G01 X-59.39832 Y35.23466
G01 X-59.37531 Y35.26161
G01 X-59.32764 Y35.31467
G01 X-59.32278 Y35.32003
G01 X-59.28011 Y35.36664
G01 X-59.21354 Y35.43151
G01 X-59.14237 Y35.49359
G01 X-59.09164 Y35.53324
G01 X-59.04641 Y35.53570
G01 X-58.99822 Y35.53329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.09164 Y35.53324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.09164 Y35.53324
G01 X-59.06142 Y35.63296
G01 X-59.04491 Y35.71566
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-59.04491 Y36.14667 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-59.04491 Y36.14667
G01 X-59.02847 Y36.22958
G01 X-58.98293 Y36.37964
G01 X-58.94618 Y36.46839
G01 X-58.87226 Y36.60669
G01 X-58.81890 Y36.68658
G01 X-58.71941 Y36.80781
G01 X-58.65149 Y36.87573
G01 X-58.53025 Y36.97522
G01 X-58.45037 Y37.02859
G01 X-58.31207 Y37.10250
G01 X-58.22332 Y37.13926
G01 X-58.07326 Y37.18480
G01 X-57.97905 Y37.20354
G01 X-57.82296 Y37.21891
G01 X-57.72690 Y37.21891
G01 X-57.57084 Y37.20354
G01 X-57.47664 Y37.18480
G01 X-57.32655 Y37.13926
G01 X-57.23780 Y37.10250
G01 X-57.09950 Y37.02859
G01 X-57.01964 Y36.97522
G01 X-56.89840 Y36.87573
G01 X-56.83048 Y36.80781
G01 X-56.74992 Y36.70964
G01 X-56.73099 Y36.68658
G01 X-56.67763 Y36.60669
G01 X-56.60369 Y36.46839
G01 X-56.56693 Y36.37964
G01 X-56.52142 Y36.22958
G01 X-56.50493 Y36.14667
G01 X-56.50491 Y35.83156
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.15193 Y33.70416 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.15193 Y33.70416
G01 X-54.20842 Y33.65780
G01 X-54.26935 Y33.58353
G01 X-54.31464 Y33.49883
G01 X-54.34253 Y33.40690
G01 X-54.35193 Y33.31132
G01 X-54.35193 Y33.25133
G01 X-54.37192 Y33.25133
G01 X-54.37192 Y33.34757
G01 X-54.36737 Y33.39875
G01 X-54.33798 Y33.50149
G01 X-54.28998 Y33.59339
G01 X-54.22439 Y33.67381
G01 X-54.15193 Y33.73291
G01 X-54.15193 Y33.70416
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-55.68990 Y34.76072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-55.68990 Y34.76072
G01 X-55.67092 Y34.76425
G01 X-55.51515 Y34.77993
G01 X-55.50227 Y34.78005
G01 X-55.45154 Y34.78216
G01 X-55.42670 Y34.78401
G01 X-55.33745 Y34.78521
G01 X-55.26932 Y34.78186
G01 X-55.20052 Y34.78186
G01 X-55.13994 Y34.78483
G01 X-55.04448 Y34.79750
G01 X-54.97669 Y34.80990
G01 X-54.95238 Y34.81559
G01 X-54.82681 Y34.85618
G01 X-54.77215 Y34.87639
G01 X-54.76267 Y34.88140
G01 X-54.62457 Y34.95567
G01 X-54.60489 Y34.96664
G01 X-54.56757 Y34.99450
G01 X-54.45523 Y35.08429
G01 X-54.44576 Y35.09326
G01 X-54.39800 Y35.14299
G01 X-54.31832 Y35.23466
G01 X-54.29531 Y35.26161
G01 X-54.24764 Y35.31467
G01 X-54.24278 Y35.32003
G01 X-54.20011 Y35.36664
G01 X-54.13354 Y35.43151
G01 X-54.06237 Y35.49359
G01 X-54.01164 Y35.53324
G01 X-53.96641 Y35.53570
G01 X-53.91822 Y35.53329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.01164 Y35.53324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.01164 Y35.53324
G01 X-53.98142 Y35.63296
G01 X-53.96493 Y35.71566
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-53.96493 Y36.14667 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-53.96493 Y36.14667
G01 X-53.94847 Y36.22958
G01 X-53.90293 Y36.37964
G01 X-53.86618 Y36.46839
G01 X-53.79226 Y36.60669
G01 X-53.73890 Y36.68658
G01 X-53.63941 Y36.80781
G01 X-53.57149 Y36.87573
G01 X-53.45025 Y36.97522
G01 X-53.37037 Y37.02859
G01 X-53.23207 Y37.10250
G01 X-53.14332 Y37.13926
G01 X-52.99326 Y37.18480
G01 X-52.89905 Y37.20354
G01 X-52.74296 Y37.21891
G01 X-52.64690 Y37.21891
G01 X-52.49084 Y37.20354
G01 X-52.39664 Y37.18480
G01 X-52.24655 Y37.13926
G01 X-52.15780 Y37.10250
G01 X-52.01950 Y37.02859
G01 X-51.93964 Y36.97522
G01 X-51.81840 Y36.87573
G01 X-51.75048 Y36.80781
G01 X-51.66992 Y36.70964
G01 X-51.65099 Y36.68658
G01 X-51.59763 Y36.60669
G01 X-51.52369 Y36.46839
G01 X-51.48693 Y36.37964
G01 X-51.44142 Y36.22958
G01 X-51.42493 Y36.14667
G01 X-51.42491 Y35.83156
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-52.49539 Y34.54381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.49539 Y34.54381
G01 X-52.48211 Y34.52382
G01 X-52.47299 Y34.48973
G01 X-52.46341 Y34.42930
G01 X-52.45805 Y34.32697
G01 X-52.47192 Y34.23934
G01 X-52.47192 Y33.70413
G01 X-52.41546 Y33.65780
G01 X-52.35452 Y33.58353
G01 X-52.30923 Y33.49883
G01 X-52.28134 Y33.40690
G01 X-52.27195 Y33.31132
G01 X-52.27195 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-54.15193 Y31.08974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-54.15193 Y31.08974
G01 X-54.22439 Y31.14884
G01 X-54.28998 Y31.22926
G01 X-54.33798 Y31.32116
G01 X-54.36737 Y31.42390
G01 X-54.37192 Y31.47508
G01 X-54.37192 Y31.57132
G01 X-54.35193 Y31.57132
G01 X-54.35193 Y31.51130
G01 X-54.34253 Y31.41572
G01 X-54.31464 Y31.32380
G01 X-54.26935 Y31.23909
G01 X-54.20842 Y31.16482
G01 X-54.15193 Y31.11846
G01 X-54.15193 Y31.08974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-56.78548 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-56.78548 Y31.08090
G01 X-56.80275 Y31.09672
G01 X-56.84324 Y31.13188
G01 X-56.85268 Y31.13965
G01 X-56.89160 Y31.17356
G01 X-56.91359 Y31.19393
G01 X-56.94605 Y31.22225
G01 X-56.95827 Y31.23228
G01 X-56.98987 Y31.25997
G01 X-57.00503 Y31.27414
G01 X-57.03376 Y31.29929
G01 X-57.04694 Y31.31011
G01 X-57.07524 Y31.33495
G01 X-57.08781 Y31.34676
G01 X-57.11512 Y31.37074
G01 X-57.12873 Y31.38191
G01 X-57.15604 Y31.40589
G01 X-57.16861 Y31.41770
G01 X-57.19691 Y31.44254
G01 X-57.21009 Y31.45336
G01 X-57.23882 Y31.47851
G01 X-57.25398 Y31.49268
G01 X-57.28558 Y31.52037
G01 X-57.29779 Y31.53040
G01 X-57.33026 Y31.55872
G01 X-57.35225 Y31.57909
G01 X-57.39116 Y31.61300
G01 X-57.40061 Y31.62077
G01 X-57.44110 Y31.65593
G01 X-57.47699 Y31.68882
G01 X-57.48194 Y31.69332
G01 X-57.52385 Y31.73132
G01 X-57.98695 Y31.73132
G01 X-58.03190 Y31.68636
G01 X-58.07163 Y31.64468
G01 X-58.12050 Y31.59078
G01 X-58.17371 Y31.52619
G01 X-58.18474 Y31.51130
G01 X-58.21425 Y31.47419
G01 X-58.25027 Y31.43215
G01 X-58.28956 Y31.39126
G01 X-58.32154 Y31.36170
G01 X-58.36337 Y31.32766
G01 X-58.39883 Y31.30231
G01 X-58.44694 Y31.27208
G01 X-58.47214 Y31.25819
G01 X-58.47836 Y31.23556
G01 X-58.49187 Y31.18163
G01 X-58.50081 Y31.13673
G01 X-58.50882 Y31.08280
G01 X-58.51296 Y31.04079
G01 X-58.51562 Y30.98689
G01 X-58.51611 Y30.96634
G01 X-58.51611 Y29.71633
G01 X-58.51562 Y29.69576
G01 X-58.51296 Y29.64186
G01 X-58.50882 Y29.59985
G01 X-58.50081 Y29.54593
G01 X-58.49187 Y29.50102
G01 X-58.47836 Y29.44709
G01 X-58.46322 Y29.39731
G01 X-58.44394 Y29.34344
G01 X-58.41999 Y29.28580
G01 X-58.41611 Y29.27760
G01 X-58.41611 Y28.95405
G01 X-58.41537 Y28.92365
G01 X-58.41199 Y28.85505
G01 X-58.40587 Y28.79307
G01 X-58.39571 Y28.72446
G01 X-58.38258 Y28.65860
G01 X-58.37780 Y28.63955
G01 X-58.34575 Y28.60051
G01 X-58.30142 Y28.55154
G01 X-58.25855 Y28.50422
G01 X-58.25548 Y28.50049
G01 X-58.23465 Y28.47638
G01 X-58.15388 Y28.38723
G01 X-58.11209 Y28.33630
G01 X-58.01763 Y28.20897
G01 X-57.97671 Y28.14766
G01 X-57.89360 Y28.00900
G01 X-57.85238 Y27.93170
G01 X-57.80534 Y27.83221
G01 X-57.80531 Y27.51690
G01 X-57.82180 Y27.43414
G01 X-57.86734 Y27.28408
G01 X-57.90409 Y27.19533
G01 X-57.97803 Y27.05706
G01 X-58.03140 Y26.97717
G01 X-58.13089 Y26.85591
G01 X-58.16414 Y26.82266
G01 X-58.16414 Y26.79094
G01 X-58.11232 Y26.83897
G01 X-58.06165 Y26.90250
G01 X-58.01125 Y26.95670
G01 X-57.98936 Y26.97694
G01 X-57.96289 Y26.99625
G01 X-57.89746 Y27.04395
G01 X-57.79261 Y27.08794
G01 X-57.73384 Y27.10491
G01 X-57.66777 Y27.11669
G01 X-57.66335 Y27.11446
G01 X-57.59241 Y27.07852
G01 X-57.51392 Y27.03082
G01 X-57.46589 Y26.99930
G01 X-57.41408 Y26.96269
G01 X-57.38045 Y26.93747
G01 X-57.32520 Y26.89363
G01 X-57.32337 Y26.89218
G01 X-57.20267 Y26.79571
G01 X-57.16549 Y26.76795
G01 X-57.14572 Y26.75690
G01 X-57.00760 Y26.68263
G01 X-56.99802 Y26.67755
G01 X-56.94339 Y26.65734
G01 X-56.81786 Y26.61680
G01 X-56.79355 Y26.61108
G01 X-56.72579 Y26.59871
G01 X-56.63033 Y26.58604
G01 X-56.56973 Y26.58307
G01 X-56.50092 Y26.58307
G01 X-56.44032 Y26.58604
G01 X-56.34486 Y26.59871
G01 X-56.27710 Y26.61108
G01 X-56.25279 Y26.61680
G01 X-56.12726 Y26.65734
G01 X-56.07260 Y26.67755
G01 X-56.06305 Y26.68263
G01 X-56.00585 Y26.71337
G01 X-55.92492 Y26.75690
G01 X-55.90516 Y26.76795
G01 X-55.86798 Y26.79571
G01 X-55.75563 Y26.88550
G01 X-55.74613 Y26.89447
G01 X-55.69841 Y26.94420
G01 X-55.62744 Y27.02586
G01 X-55.59858 Y27.06516
G01 X-55.56066 Y27.12259
G01 X-55.52368 Y27.18500
G01 X-55.48680 Y27.26092
G01 X-55.48304 Y27.26882
G01 X-55.45728 Y27.32355
G01 X-55.44730 Y27.34390
G01 X-55.42607 Y27.38558
G01 X-55.38007 Y27.46399
G01 X-55.33249 Y27.53524
G01 X-55.29823 Y27.58337
G01 X-55.25492 Y27.64057
G01 X-55.25190 Y27.64440
G01 X-55.25187 Y27.64440
G01 X-55.15744 Y27.67047
G01 X-55.05520 Y27.67656
G01 X-54.95393 Y27.66132
G01 X-54.89473 Y27.64590
G01 X-54.79882 Y27.60991
G01 X-54.71248 Y27.55474
G01 X-54.63951 Y27.48286
G01 X-54.60064 Y27.43559
G01 X-54.55663 Y27.37255
G01 X-54.52302 Y27.30341
G01 X-54.46770 Y27.16247
G01 X-54.36953 Y26.99244
G01 X-54.24710 Y26.83895
G01 X-54.17992 Y26.77661
G01 X-54.17992 Y26.80725
G01 X-54.22859 Y26.85591
G01 X-54.32808 Y26.97717
G01 X-54.38144 Y27.05706
G01 X-54.45538 Y27.19533
G01 X-54.49214 Y27.28408
G01 X-54.53768 Y27.43414
G01 X-54.55640 Y27.52835
G01 X-54.57179 Y27.68444
G01 X-54.57179 Y27.78050
G01 X-54.55640 Y27.93656
G01 X-54.53768 Y28.03079
G01 X-54.49214 Y28.18088
G01 X-54.45538 Y28.26963
G01 X-54.38144 Y28.40790
G01 X-54.32808 Y28.48776
G01 X-54.22859 Y28.60900
G01 X-54.16067 Y28.67691
G01 X-54.12411 Y28.70691
G01 X-54.12411 Y28.74014
G01 X-54.24710 Y28.62601
G01 X-54.36953 Y28.47252
G01 X-54.46770 Y28.30247
G01 X-54.52302 Y28.16152
G01 X-54.57717 Y28.06033
G01 X-54.60349 Y28.02256
G01 X-54.66115 Y27.95413
G01 X-54.73026 Y27.89736
G01 X-54.80857 Y27.85408
G01 X-54.86460 Y27.82952
G01 X-54.94403 Y27.80417
G01 X-54.96221 Y27.79838
G01 X-55.06417 Y27.78819
G01 X-55.16602 Y27.79950
G01 X-55.22581 Y27.81255
G01 X-55.25022 Y27.82063
G01 X-55.25182 Y27.82274
G01 X-55.25185 Y27.82276
G01 X-55.33343 Y27.92962
G01 X-55.37923 Y28.00122
G01 X-55.40283 Y28.04057
G01 X-55.43348 Y28.09520
G01 X-55.45726 Y28.14141
G01 X-55.48301 Y28.19614
G01 X-55.48680 Y28.20404
G01 X-55.52365 Y28.27996
G01 X-55.56066 Y28.34242
G01 X-55.59858 Y28.39980
G01 X-55.62746 Y28.43915
G01 X-55.69028 Y28.51143
G01 X-55.69841 Y28.52078
G01 X-55.74613 Y28.57051
G01 X-55.75561 Y28.57946
G01 X-55.86798 Y28.66927
G01 X-55.90514 Y28.69703
G01 X-55.92497 Y28.70808
G01 X-56.06307 Y28.78235
G01 X-56.07257 Y28.78740
G01 X-56.12721 Y28.80760
G01 X-56.25279 Y28.84816
G01 X-56.27704 Y28.85385
G01 X-56.34486 Y28.86625
G01 X-56.44034 Y28.87892
G01 X-56.47430 Y28.88057
G01 X-56.50087 Y28.88240
G01 X-56.57036 Y28.88845
G01 X-56.57928 Y28.88928
G01 X-56.63795 Y28.89510
G01 X-56.67196 Y28.89927
G01 X-56.81702 Y29.02515
G01 X-56.85764 Y29.07105
G01 X-56.97664 Y29.25144
G01 X-56.97280 Y29.26376
G01 X-56.96630 Y29.28385
G01 X-56.95459 Y29.31857
G01 X-56.94590 Y29.34577
G01 X-56.93216 Y29.39182
G01 X-56.91456 Y29.44356
G01 X-56.90961 Y29.45654
G01 X-56.89180 Y29.50917
G01 X-56.87656 Y29.56089
G01 X-56.86447 Y29.60795
G01 X-56.86226 Y29.62822
G01 X-56.86147 Y29.63650
G01 X-56.85784 Y29.67536
G01 X-56.85751 Y29.68192
G01 X-56.85667 Y29.71633
G01 X-56.85667 Y30.71181
G01 X-56.85449 Y30.76700
G01 X-56.85205 Y30.79799
G01 X-56.81870 Y30.96634
G01 X-56.81705 Y30.97158
G01 X-56.80702 Y31.00571
G01 X-56.79927 Y31.03426
G01 X-56.79142 Y31.06142
G01 X-56.78548 Y31.08090
G01 X-56.76193 Y31.09060
G01 X-56.57966 Y31.14257
G01 X-56.51847 Y31.15227
G01 X-56.40745 Y31.16106
G01 X-56.21192 Y31.16106
G01 X-56.17753 Y31.16192
G01 X-56.17092 Y31.16225
G01 X-56.12383 Y31.16665
G01 X-56.10349 Y31.16886
G01 X-56.06752 Y31.17780
G01 X-56.05634 Y31.18100
G01 X-56.00463 Y31.19626
G01 X-55.97941 Y31.20421
G01 X-55.94141 Y31.22283
G01 X-55.89373 Y31.24803
G01 X-55.86696 Y31.26291
G01 X-55.83653 Y31.28646
G01 X-55.79480 Y31.32060
G01 X-55.76869 Y31.34305
G01 X-55.74618 Y31.36924
G01 X-55.71205 Y31.41095
G01 X-55.68853 Y31.44137
G01 X-55.67369 Y31.46799
G01 X-55.64850 Y31.51567
G01 X-55.63707 Y31.53833
G01 X-55.62983 Y31.55374
G01 X-55.62183 Y31.57917
G01 X-55.60659 Y31.63088
G01 X-55.59444 Y31.67795
G01 X-55.59226 Y31.69822
G01 X-55.58784 Y31.74536
G01 X-55.58751 Y31.75192
G01 X-55.58667 Y31.78633
G01 X-55.58667 Y33.03634
G01 X-55.58751 Y33.07073
G01 X-55.58784 Y33.07731
G01 X-55.59226 Y33.12443
G01 X-55.59444 Y33.14470
G01 X-55.60656 Y33.19176
G01 X-55.62180 Y33.24348
G01 X-55.62980 Y33.26885
G01 X-55.64850 Y33.30698
G01 X-55.67369 Y33.35466
G01 X-55.68855 Y33.38135
G01 X-55.69229 Y33.38651
G01 X-55.69556 Y33.39095
G01 X-55.71123 Y33.41224
G01 X-55.74166 Y33.45702
G01 X-55.76437 Y33.49331
G01 X-55.76976 Y33.50182
G01 X-55.77788 Y33.55326
G01 X-55.78667 Y33.66413
G01 X-55.78667 Y34.33179
G01 X-55.78449 Y34.38699
G01 X-55.78205 Y34.41798
G01 X-55.74705 Y34.59141
G01 X-55.73021 Y34.64330
G01 X-55.72724 Y34.65262
G01 X-55.71725 Y34.68465
G01 X-55.69175 Y34.75613
G01 X-55.68990 Y34.76072
G01 X-55.73884 Y34.82209
G01 X-55.74682 Y34.83194
G01 X-55.79394 Y34.88935
G01 X-55.84603 Y34.94693
G01 X-55.84857 Y34.94947
G01 X-55.89389 Y34.99915
G01 X-55.89617 Y35.00192
G01 X-55.93884 Y35.04878
G01 X-55.98759 Y35.09753
G01 X-56.00603 Y35.11526
G01 X-56.01067 Y35.11955
G01 X-56.05091 Y35.16016
G01 X-56.15634 Y35.27652
G01 X-56.19815 Y35.32747
G01 X-56.29261 Y35.45480
G01 X-56.33351 Y35.51609
G01 X-56.41664 Y35.65480
G01 X-56.45787 Y35.73204
G01 X-56.50491 Y35.83156
G01 X-56.50493 Y35.88498
G01 X-56.50493 Y36.14667
G01 X-56.48847 Y36.22958
G01 X-56.44293 Y36.37964
G01 X-56.40618 Y36.46839
G01 X-56.33226 Y36.60669
G01 X-56.27890 Y36.68658
G01 X-56.17941 Y36.80781
G01 X-56.11149 Y36.87573
G01 X-56.07491 Y36.90573
G01 X-56.07491 Y40.15929
G01 X-56.09645 Y40.19152
G01 X-56.17039 Y40.32983
G01 X-56.20714 Y40.41857
G01 X-56.25266 Y40.56866
G01 X-56.26912 Y40.65144
G01 X-56.26912 Y40.89101
G01 X-56.26914 Y40.91324
G01 X-56.26914 Y40.96670
G01 X-56.22208 Y41.06620
G01 X-56.18080 Y41.14354
G01 X-56.09767 Y41.28220
G01 X-56.05683 Y41.34339
G01 X-55.96241 Y41.47074
G01 X-55.92058 Y41.52172
G01 X-55.81512 Y41.63808
G01 X-55.77024 Y41.68296
G01 X-55.65388 Y41.78842
G01 X-55.60293 Y41.83020
G01 X-55.47560 Y41.92467
G01 X-55.41431 Y41.96559
G01 X-55.27562 Y42.04869
G01 X-55.19836 Y42.08992
G01 X-55.06534 Y42.15283
G01 X-52.43118 Y44.78699
G01 X-52.26704 Y44.78699
G01 X-51.58262 Y45.07048
G01 X-51.56275 Y45.07815
G01 X-51.49415 Y45.10271
G01 X-51.46095 Y45.11280
G01 X-51.39234 Y45.12999
G01 X-51.36410 Y45.13563
G01 X-51.29549 Y45.14579
G01 X-51.27004 Y45.14831
G01 X-51.20144 Y45.15169
G01 X-51.18914 Y45.15199
G01 X-49.09428 Y45.15199
G01 X-49.08199 Y45.15229
G01 X-49.01336 Y45.15567
G01 X-48.98788 Y45.15819
G01 X-48.91927 Y45.16835
G01 X-48.89103 Y45.17399
G01 X-48.85669 Y45.18260
G01 X-48.82885 Y45.20322
G01 X-48.80614 Y45.22187
G01 X-48.75524 Y45.26799
G01 X-48.74500 Y45.27775
G01 X-47.33665 Y46.68610
G01 X-47.32690 Y46.69634
G01 X-47.28077 Y46.74724
G01 X-47.26213 Y46.76994
G01 X-47.24150 Y46.79776
G01 X-47.23292 Y46.83212
G01 X-47.22728 Y46.86037
G01 X-47.21709 Y46.92900
G01 X-47.21458 Y46.95442
G01 X-47.21120 Y47.02306
G01 X-47.21090 Y47.03535
G01 X-47.21090 Y63.90382
G01 X-47.21120 Y63.91611
G01 X-47.21458 Y63.98474
G01 X-47.21709 Y64.01019
G01 X-47.22728 Y64.07883
G01 X-47.22969 Y64.09282
G01 X-47.23787 Y64.10443
G01 X-47.27920 Y64.16013
G01 X-47.29543 Y64.17992
G01 X-47.34158 Y64.23082
G01 X-47.35004 Y64.23971
G01 X-49.87454 Y66.76419
G01 X-49.88343 Y66.77265
G01 X-49.93431 Y66.81880
G01 X-49.95412 Y66.83503
G01 X-50.00982 Y66.87636
G01 X-50.03380 Y66.89236
G01 X-50.09446 Y66.92871
G01 X-50.09611 Y66.92967
G01 X-50.12626 Y66.93257
G01 X-50.19489 Y66.93594
G01 X-50.21043 Y66.93633
G01 X-54.52295 Y66.93633
G01 X-54.53847 Y66.93671
G01 X-54.60707 Y66.94008
G01 X-54.63907 Y66.94323
G01 X-54.70768 Y66.95342
G01 X-54.74268 Y66.96040
G01 X-54.81129 Y66.97758
G01 X-54.85157 Y66.98982
G01 X-54.92018 Y67.01438
G01 X-54.94375 Y67.02350
G01 X-55.53483 Y67.26830
G01 X-55.94037 Y67.67379
G01 X-56.05596 Y67.86503
G01 X-56.09582 Y67.91169
G01 X-56.11545 Y67.93388
G01 X-56.19432 Y67.96203
G01 X-56.26932 Y67.98489
G01 X-56.30412 Y67.99459
G01 X-56.34867 Y68.00582
G01 X-56.42337 Y68.02052
G01 X-56.42929 Y68.02136
G01 X-56.49117 Y68.03294
G01 X-56.51545 Y68.03863
G01 X-56.64103 Y68.07922
G01 X-56.69566 Y68.09942
G01 X-56.70519 Y68.10445
G01 X-56.84329 Y68.17872
G01 X-56.86310 Y68.18976
G01 X-56.90028 Y68.21755
G01 X-57.01263 Y68.30734
G01 X-57.02210 Y68.31631
G01 X-57.06985 Y68.36604
G01 X-57.14082 Y68.44768
G01 X-57.16968 Y68.48700
G01 X-57.20762 Y68.54445
G01 X-57.24458 Y68.60683
G01 X-57.28146 Y68.68280
G01 X-57.30846 Y68.74613
G01 X-57.32124 Y68.78070
G01 X-57.35342 Y68.89639
G01 X-57.36861 Y68.96363
G01 X-57.36881 Y68.96479
G01 X-57.38286 Y69.11981
G01 X-57.38514 Y69.15433
G01 X-57.38288 Y69.18882
G01 X-57.36881 Y69.34386
G01 X-57.36861 Y69.34501
G01 X-57.35342 Y69.41227
G01 X-57.32124 Y69.52796
G01 X-57.30846 Y69.56251
G01 X-57.28149 Y69.62580
G01 X-57.24458 Y69.70180
G01 X-57.20765 Y69.76418
G01 X-57.16965 Y69.82169
G01 X-57.14082 Y69.86096
G01 X-57.06983 Y69.94262
G01 X-57.02213 Y69.99233
G01 X-57.01263 Y70.00129
G01 X-56.94819 Y70.05280
G01 X-56.90028 Y70.09111
G01 X-56.86307 Y70.11887
G01 X-56.84334 Y70.12989
G01 X-56.76671 Y70.17112
G01 X-56.69688 Y70.18862
G01 X-56.63249 Y70.20144
G01 X-56.47565 Y70.22471
G01 X-56.41771 Y70.23043
G01 X-56.26089 Y70.23812
G01 X-56.20498 Y70.23812
G01 X-56.04816 Y70.23043
G01 X-55.99020 Y70.22471
G01 X-55.83336 Y70.20144
G01 X-55.76897 Y70.18862
G01 X-55.69912 Y70.17112
G01 X-55.62251 Y70.12989
G01 X-55.60278 Y70.11887
G01 X-55.56556 Y70.09111
G01 X-55.45322 Y70.00129
G01 X-55.44372 Y69.99233
G01 X-55.39602 Y69.94262
G01 X-55.32505 Y69.86098
G01 X-55.30064 Y69.82771
G01 X-55.29620 Y69.82166
G01 X-55.25822 Y69.76418
G01 X-55.23209 Y69.72009
G01 X-55.22124 Y69.70178
G01 X-55.18436 Y69.62583
G01 X-55.15739 Y69.56251
G01 X-55.14464 Y69.52801
G01 X-55.11243 Y69.41227
G01 X-55.09724 Y69.34501
G01 X-55.09704 Y69.34386
G01 X-55.08299 Y69.18882
G01 X-55.08025 Y69.13950
G01 X-55.07984 Y69.11948
G01 X-55.07171 Y69.02479
G01 X-55.07042 Y69.01615
G01 X-55.04047 Y68.97155
G01 X-54.96216 Y68.87424
G01 X-54.95706 Y68.86894
G01 X-54.94748 Y68.85918
G01 X-54.55975 Y68.47148
G01 X-54.52759 Y68.43599
G01 X-54.47926 Y68.38766
G01 X-54.44380 Y68.35550
G01 X-54.36448 Y68.27618
G01 X-54.27974 Y68.20389
G01 X-54.22963 Y68.16746
G01 X-54.22483 Y68.16401
G01 X-54.10039 Y68.14623
G01 X-53.94441 Y68.12309
G01 X-53.88066 Y68.11679
G01 X-53.72384 Y68.10907
G01 X-53.66204 Y68.10907
G01 X-53.50522 Y68.11679
G01 X-53.44144 Y68.12309
G01 X-53.29656 Y68.14458
G01 X-49.88295 Y68.14458
G01 X-49.84851 Y68.14374
G01 X-49.81422 Y68.14204
G01 X-49.78021 Y68.13701
G01 X-49.71274 Y68.12357
G01 X-49.67942 Y68.11522
G01 X-49.64709 Y68.10366
G01 X-49.58348 Y68.07732
G01 X-49.55242 Y68.06264
G01 X-49.52298 Y68.04501
G01 X-49.46570 Y68.00673
G01 X-49.43815 Y67.98629
G01 X-49.41267 Y67.96320
G01 X-49.38778 Y67.93947
G01 X-47.25308 Y65.80481
G01 X-47.16848 Y65.73262
G01 X-47.11836 Y65.69620
G01 X-46.87998 Y65.57717
G01 X-46.81468 Y65.55596
G01 X-46.80358 Y65.55304
G01 X-46.71491 Y65.57679
G01 X-46.63477 Y65.61761
G01 X-46.62588 Y65.63381
G01 X-46.62591 Y65.63384
G01 X-46.57798 Y65.72157
G01 X-46.62588 Y65.63381
G01 X-46.62588 Y65.37522
G01 X-46.80358 Y65.55304
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.57798 Y65.72157 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.57798 Y65.72157
G01 X-46.55263 Y65.78276
G01 X-46.49652 Y65.99350
G01 X-46.49106 Y66.03973
G01 X-46.48618 Y66.12246
G01 X-46.48618 Y77.47618
G01 X-46.49495 Y77.58710
G01 X-46.50462 Y77.64827
G01 X-46.50559 Y77.65424
G01 X-46.58809 Y77.76257
G01 X-46.59863 Y77.77400
G01 X-46.61775 Y77.79386
G01 X-50.21920 Y81.39530
G01 X-50.30390 Y81.46756
G01 X-50.35402 Y81.50399
G01 X-50.35882 Y81.50744
G01 X-50.49379 Y81.52573
G01 X-50.50934 Y81.52634
G01 X-50.53687 Y81.52687
G01 X-56.97598 Y81.52687
G01 X-57.08687 Y81.51808
G01 X-57.14806 Y81.50841
G01 X-57.15403 Y81.50744
G01 X-57.26236 Y81.42497
G01 X-57.27377 Y81.41443
G01 X-57.29365 Y81.39530
G01 X-57.79444 Y80.89449
G01 X-57.86665 Y80.80988
G01 X-57.90305 Y80.75977
G01 X-57.99871 Y80.58565
G01 X-57.99866 Y80.57971
G01 X-57.97191 Y80.52934
G01 X-57.95822 Y80.50544
G01 X-57.94029 Y80.47242
G01 X-57.92175 Y80.43632
G01 X-57.87222 Y80.35367
G01 X-57.86614 Y80.34491
G01 X-57.85522 Y80.32962
G01 X-57.83617 Y80.30363
G01 X-57.79822 Y80.24620
G01 X-57.76127 Y80.18382
G01 X-57.72898 Y80.11735
G01 X-57.72439 Y80.10788
G01 X-57.69739 Y80.04453
G01 X-57.68461 Y80.00998
G01 X-57.67559 Y79.97755
G01 X-57.65243 Y79.89426
G01 X-57.63724 Y79.82700
G01 X-57.63706 Y79.82586
G01 X-57.62296 Y79.67082
G01 X-57.62070 Y79.63635
G01 X-57.62299 Y79.60181
G01 X-57.63704 Y79.44679
G01 X-57.63724 Y79.44562
G01 X-57.65243 Y79.37839
G01 X-57.68461 Y79.26272
G01 X-57.69739 Y79.22812
G01 X-57.72439 Y79.16480
G01 X-57.76127 Y79.08885
G01 X-57.79822 Y79.02645
G01 X-57.83617 Y78.96902
G01 X-57.86500 Y78.92972
G01 X-57.93602 Y78.84806
G01 X-57.98375 Y78.79830
G01 X-57.99322 Y78.78936
G01 X-58.10556 Y78.69955
G01 X-58.14278 Y78.67179
G01 X-58.16256 Y78.66071
G01 X-58.25029 Y78.61352
G01 X-58.30066 Y78.58647
G01 X-58.31019 Y78.58141
G01 X-58.36487 Y78.56122
G01 X-58.49037 Y78.52066
G01 X-58.51473 Y78.51497
G01 X-58.58242 Y78.50257
G01 X-58.67790 Y78.48992
G01 X-58.73848 Y78.48692
G01 X-58.80739 Y78.48692
G01 X-58.86795 Y78.48992
G01 X-58.96342 Y78.50257
G01 X-59.03112 Y78.51497
G01 X-59.05547 Y78.52066
G01 X-59.18098 Y78.56122
G01 X-59.23566 Y78.58141
G01 X-59.24519 Y78.58647
G01 X-59.38329 Y78.66071
G01 X-59.40307 Y78.67179
G01 X-59.44028 Y78.69955
G01 X-59.55263 Y78.78936
G01 X-59.56210 Y78.79830
G01 X-59.60983 Y78.84806
G01 X-59.68085 Y78.92972
G01 X-59.70968 Y78.96902
G01 X-59.74762 Y79.02645
G01 X-59.78458 Y79.08885
G01 X-59.82146 Y79.16480
G01 X-59.84846 Y79.22812
G01 X-59.86124 Y79.26272
G01 X-59.89342 Y79.37839
G01 X-59.90861 Y79.44562
G01 X-59.90881 Y79.44679
G01 X-59.92286 Y79.60181
G01 X-59.92514 Y79.63635
G01 X-59.92288 Y79.67082
G01 X-59.90879 Y79.82586
G01 X-59.90861 Y79.82700
G01 X-59.89342 Y79.89426
G01 X-59.86124 Y80.00998
G01 X-59.84846 Y80.04453
G01 X-59.82146 Y80.10788
G01 X-59.78458 Y80.18380
G01 X-59.74762 Y80.24620
G01 X-59.70968 Y80.30363
G01 X-59.68082 Y80.34298
G01 X-59.60985 Y80.42461
G01 X-59.59162 Y80.44476
G01 X-59.56292 Y80.47531
G01 X-59.51669 Y80.52962
G01 X-59.49655 Y80.55575
G01 X-59.49022 Y80.58479
G01 X-59.47379 Y80.71763
G01 X-59.47346 Y80.72906
G01 X-59.47318 Y80.74930
G01 X-59.47318 Y80.90630
G01 X-59.47234 Y80.94074
G01 X-59.47064 Y80.97503
G01 X-59.46561 Y81.00904
G01 X-59.45217 Y81.07651
G01 X-59.44381 Y81.10983
G01 X-59.43226 Y81.14216
G01 X-59.40592 Y81.20577
G01 X-59.39124 Y81.23683
G01 X-59.37361 Y81.26627
G01 X-59.33533 Y81.32355
G01 X-59.31488 Y81.35110
G01 X-59.29180 Y81.37658
G01 X-59.26807 Y81.40147
G01 X-58.84280 Y81.82677
G01 X-58.77059 Y81.91138
G01 X-58.73419 Y81.96149
G01 X-58.61514 Y82.19987
G01 X-58.59393 Y82.26517
G01 X-58.59101 Y82.27625
G01 X-58.61481 Y82.36500
G01 X-58.65560 Y82.44503
G01 X-58.75969 Y82.50193
G01 X-58.82088 Y82.52725
G01 X-59.03132 Y82.58328
G01 X-59.07755 Y82.58877
G01 X-59.16048 Y82.59367
G01 X-64.35437 Y82.59367
G01 X-64.46527 Y82.58488
G01 X-64.52646 Y82.57521
G01 X-64.77914 Y82.49083
G01 X-64.84032 Y82.45966
G01 X-64.85018 Y82.45392
G01 X-64.89618 Y82.37432
G01 X-64.92394 Y82.28885
G01 X-64.89054 Y82.17500
G01 X-64.86522 Y82.11382
G01 X-64.75597 Y81.92532
G01 X-64.72717 Y81.88880
G01 X-64.67205 Y81.82677
G01 X-63.69014 Y80.84486
G01 X-63.63047 Y80.79162
G01 X-63.59920 Y80.76675
G01 X-63.59468 Y80.76472
G01 X-63.59285 Y80.76391
G01 X-63.51904 Y80.73541
G01 X-63.44487 Y80.71146
G01 X-63.43139 Y80.70694
G01 X-63.39021 Y80.69124
G01 X-63.38066 Y80.68621
G01 X-63.24256 Y80.61194
G01 X-63.22275 Y80.60086
G01 X-63.18556 Y80.57310
G01 X-63.07322 Y80.48329
G01 X-63.06375 Y80.47435
G01 X-63.01599 Y80.42461
G01 X-62.94503 Y80.34298
G01 X-62.91617 Y80.30363
G01 X-62.87822 Y80.24620
G01 X-62.84127 Y80.18380
G01 X-62.80439 Y80.10788
G01 X-62.77739 Y80.04453
G01 X-62.76461 Y80.00998
G01 X-62.75559 Y79.97755
G01 X-62.73243 Y79.89426
G01 X-62.71724 Y79.82700
G01 X-62.71706 Y79.82586
G01 X-62.70296 Y79.67082
G01 X-62.70070 Y79.63635
G01 X-62.70299 Y79.60181
G01 X-62.71706 Y79.44679
G01 X-62.71724 Y79.44562
G01 X-62.71920 Y79.43503
G01 X-62.74749 Y79.38296
G01 X-62.83063 Y79.24428
G01 X-62.86283 Y79.19602
G01 X-62.95724 Y79.06869
G01 X-62.98960 Y79.02927
G01 X-63.09504 Y78.91291
G01 X-63.12951 Y78.87844
G01 X-63.24586 Y78.77300
G01 X-63.28529 Y78.74065
G01 X-63.41262 Y78.64623
G01 X-63.46088 Y78.61403
G01 X-63.55915 Y78.55512
G01 X-63.60484 Y78.54834
G01 X-63.66634 Y78.54227
G01 X-63.82318 Y78.53457
G01 X-63.88269 Y78.53457
G01 X-64.03951 Y78.54227
G01 X-64.10101 Y78.54834
G01 X-64.25783 Y78.57161
G01 X-64.32016 Y78.58375
G01 X-64.32519 Y78.58647
G01 X-64.46329 Y78.66071
G01 X-64.48307 Y78.67179
G01 X-64.52028 Y78.69955
G01 X-64.63263 Y78.78936
G01 X-64.64210 Y78.79830
G01 X-64.68983 Y78.84806
G01 X-64.76085 Y78.92972
G01 X-64.78968 Y78.96902
G01 X-64.82762 Y79.02645
G01 X-64.86458 Y79.08885
G01 X-64.90146 Y79.16480
G01 X-64.92846 Y79.22812
G01 X-64.94124 Y79.26272
G01 X-64.97342 Y79.37839
G01 X-64.98861 Y79.44562
G01 X-64.98881 Y79.44679
G01 X-65.00286 Y79.60181
G01 X-65.00514 Y79.63635
G01 X-65.00288 Y79.67082
G01 X-64.98879 Y79.82591
G01 X-64.98861 Y79.82705
G01 X-64.98434 Y79.84933
G01 X-64.97489 Y79.89469
G01 X-64.96450 Y79.95931
G01 X-64.95742 Y80.02114
G01 X-64.95447 Y80.05240
G01 X-64.95264 Y80.07750
G01 X-65.03027 Y80.19355
G01 X-65.05556 Y80.22456
G01 X-65.10334 Y80.27745
G01 X-66.22117 Y81.39530
G01 X-66.30590 Y81.46756
G01 X-66.35602 Y81.50399
G01 X-66.36079 Y81.50744
G01 X-66.49579 Y81.52573
G01 X-66.51134 Y81.52634
G01 X-66.53887 Y81.52687
G01 X-74.60360 Y81.52687
G01 X-74.71447 Y81.51808
G01 X-74.77566 Y81.50841
G01 X-74.78163 Y81.50744
G01 X-74.88996 Y81.42497
G01 X-74.90137 Y81.41443
G01 X-74.92125 Y81.39530
G01 X-75.11104 Y81.20551
G01 X-75.18331 Y81.12080
G01 X-75.21973 Y81.07069
G01 X-75.30238 Y80.92695
G01 X-75.27025 Y80.84346
G01 X-75.24871 Y80.79551
G01 X-75.24434 Y80.78557
G01 X-75.21993 Y80.72908
G01 X-75.19263 Y80.67277
G01 X-75.15140 Y80.58789
G01 X-75.12438 Y80.52451
G01 X-75.11160 Y80.48994
G01 X-75.07942 Y80.37427
G01 X-75.06423 Y80.30696
G01 X-75.06405 Y80.30589
G01 X-75.04998 Y80.15078
G01 X-75.04772 Y80.11636
G01 X-75.04998 Y80.08189
G01 X-75.06405 Y79.92680
G01 X-75.06423 Y79.92568
G01 X-75.06781 Y79.90671
G01 X-75.07942 Y79.85840
G01 X-75.11160 Y79.74273
G01 X-75.12438 Y79.70813
G01 X-75.15140 Y79.64476
G01 X-75.18826 Y79.56889
G01 X-75.22527 Y79.50643
G01 X-75.26319 Y79.44900
G01 X-75.29204 Y79.40968
G01 X-75.36301 Y79.32805
G01 X-75.41074 Y79.27829
G01 X-75.42024 Y79.26935
G01 X-75.46720 Y79.23180
G01 X-75.52943 Y79.17570
G01 X-75.54904 Y79.15581
G01 X-75.58120 Y79.12505
G01 X-75.59476 Y79.11286
G01 X-75.69479 Y79.00488
G01 X-75.72554 Y78.96536
G01 X-75.74579 Y78.94021
G01 X-75.75704 Y78.92665
G01 X-75.76491 Y78.91702
G01 X-75.79171 Y78.92373
G01 X-75.92737 Y78.94793
G01 X-76.00688 Y78.95609
G01 X-76.02252 Y78.95754
G01 X-76.10065 Y78.96394
G01 X-76.16547 Y78.96635
G01 X-76.19395 Y78.96610
G01 X-76.23433 Y78.96691
G01 X-76.29491 Y78.96988
G01 X-76.39036 Y78.98253
G01 X-76.45816 Y78.99498
G01 X-76.48236 Y79.00061
G01 X-76.60802 Y79.04123
G01 X-76.66265 Y79.06142
G01 X-76.67218 Y79.06648
G01 X-76.81028 Y79.14072
G01 X-76.83009 Y79.15179
G01 X-76.86727 Y79.17953
G01 X-76.97962 Y79.26935
G01 X-76.98912 Y79.27831
G01 X-77.03685 Y79.32805
G01 X-77.09760 Y79.39797
G01 X-77.14205 Y79.44461
G01 X-77.16336 Y79.46505
G01 X-77.19392 Y79.49614
G01 X-77.21833 Y79.52243
G01 X-77.31348 Y79.61006
G01 X-77.38927 Y79.67016
G01 X-77.40352 Y79.66472
G01 X-77.48201 Y79.63412
G01 X-77.67169 Y79.53099
G01 X-77.73456 Y79.48476
G01 X-77.81086 Y79.41997
G01 X-77.81525 Y79.41565
G01 X-77.82033 Y79.41065
G01 X-77.96278 Y79.26818
G01 X-77.98767 Y79.24448
G01 X-78.01320 Y79.22134
G01 X-78.03875 Y79.20237
G01 X-78.04070 Y79.20092
G01 X-78.09552 Y79.16000
G01 X-78.09625 Y79.15944
G01 X-78.11406 Y79.14613
G01 X-78.13697 Y79.11710
G01 X-78.15518 Y79.09520
G01 X-78.18160 Y79.06137
G01 X-78.18505 Y79.05665
G01 X-78.25599 Y78.97504
G01 X-78.30375 Y78.92533
G01 X-78.31320 Y78.91636
G01 X-78.42559 Y78.82655
G01 X-78.46275 Y78.79881
G01 X-78.48256 Y78.78774
G01 X-78.62066 Y78.71344
G01 X-78.63021 Y78.70841
G01 X-78.68487 Y78.68819
G01 X-78.81043 Y78.64763
G01 X-78.83473 Y78.64194
G01 X-78.85099 Y78.63836
G01 X-78.90242 Y78.62957
G01 X-78.99793 Y78.61690
G01 X-79.05848 Y78.61392
G01 X-79.12739 Y78.61392
G01 X-79.14941 Y78.61504
G01 X-79.27883 Y78.67623
G01 X-79.33212 Y78.70465
G01 X-79.47080 Y78.78776
G01 X-79.51108 Y78.81469
G01 X-79.63841 Y78.90910
G01 X-79.67075 Y78.93562
G01 X-79.78711 Y79.04108
G01 X-79.81517 Y79.06914
G01 X-79.92063 Y79.18550
G01 X-79.94715 Y79.21786
G01 X-80.04159 Y79.34519
G01 X-80.06849 Y79.38547
G01 X-80.15160 Y79.52413
G01 X-80.18002 Y79.57745
G01 X-80.23351 Y79.69045
G01 X-80.23735 Y79.72934
G01 X-80.24070 Y79.79762
G01 X-80.24070 Y79.82187
G01 X-80.22881 Y79.95286
G01 X-80.22861 Y79.95400
G01 X-80.21342 Y80.02129
G01 X-80.18124 Y80.13696
G01 X-80.16846 Y80.17153
G01 X-80.14146 Y80.23485
G01 X-80.10458 Y80.31082
G01 X-80.06762 Y80.37320
G01 X-80.05071 Y80.40036
G01 X-80.03044 Y80.43127
G01 X-80.00148 Y80.47945
G01 X-79.96371 Y80.54824
G01 X-79.95223 Y80.56998
G01 X-79.91555 Y80.64211
G01 X-79.89191 Y80.69238
G01 X-79.92312 Y80.74834
G01 X-79.95597 Y80.80249
G01 X-79.96531 Y80.81831
G01 X-79.99407 Y80.86825
G01 X-80.02650 Y80.91956
G01 X-80.03590 Y80.93312
G01 X-80.04692 Y80.94859
G01 X-80.05678 Y80.96203
G01 X-80.05696 Y80.96228
G01 X-80.08317 Y80.99802
G01 X-80.12112 Y81.05545
G01 X-80.15810 Y81.11786
G01 X-80.19495 Y81.19380
G01 X-80.22195 Y81.25707
G01 X-80.23473 Y81.29169
G01 X-80.26691 Y81.40734
G01 X-80.28213 Y81.47470
G01 X-80.28230 Y81.47579
G01 X-80.29638 Y81.63086
G01 X-80.29864 Y81.66533
G01 X-80.29638 Y81.69977
G01 X-80.28230 Y81.85486
G01 X-80.28213 Y81.85596
G01 X-80.26691 Y81.92332
G01 X-80.23473 Y82.03896
G01 X-80.22195 Y82.07356
G01 X-80.19498 Y82.13683
G01 X-80.15807 Y82.21280
G01 X-80.12114 Y82.27518
G01 X-80.08314 Y82.33269
G01 X-80.05431 Y82.37196
G01 X-79.98332 Y82.45362
G01 X-79.97827 Y82.45936
G01 X-79.93732 Y82.50543
G01 X-79.91675 Y82.52964
G01 X-79.87141 Y82.58537
G01 X-79.86976 Y82.59207
G01 X-79.84954 Y82.72636
G01 X-79.84774 Y82.75915
G01 X-79.84667 Y82.79779
G01 X-79.84667 Y82.98643
G01 X-79.84583 Y83.02085
G01 X-79.84413 Y83.05511
G01 X-79.83910 Y83.08915
G01 X-79.82566 Y83.15661
G01 X-79.81733 Y83.18994
G01 X-79.80575 Y83.22227
G01 X-79.77944 Y83.28587
G01 X-79.76473 Y83.31694
G01 X-79.74710 Y83.34638
G01 X-79.70882 Y83.40365
G01 X-79.68838 Y83.43121
G01 X-79.66529 Y83.45669
G01 X-79.64156 Y83.48158
G01 X-78.31807 Y84.80507
G01 X-78.29318 Y84.82880
G01 X-78.26768 Y84.85189
G01 X-78.24014 Y84.87233
G01 X-78.18287 Y84.91061
G01 X-78.15343 Y84.92824
G01 X-78.12237 Y84.94292
G01 X-78.05876 Y84.96926
G01 X-78.02643 Y84.98082
G01 X-77.99310 Y84.98917
G01 X-77.92567 Y85.00261
G01 X-77.89163 Y85.00764
G01 X-77.85739 Y85.00934
G01 X-77.82295 Y85.01018
G01 X-76.37538 Y85.01018
G01 X-76.28313 Y85.01625
G01 X-76.20601 Y85.02641
G01 X-76.00243 Y85.08196
G01 X-75.92532 Y85.11391
G01 X-75.84111 Y85.16052
G01 X-75.80225 Y85.22783
G01 X-75.77304 Y85.30809
G01 X-75.75308 Y85.38259
G01 X-75.75148 Y85.39161
G01 X-75.84119 Y85.61264
G01 X-75.88109 Y85.68180
G01 X-75.96522 Y85.79956
G01 X-75.99090 Y85.82887
G01 X-76.02234 Y85.86245
G01 X-76.73126 Y86.57134
G01 X-76.80068 Y86.63220
G01 X-76.86237 Y86.67957
G01 X-76.99351 Y86.76067
G01 X-77.03037 Y86.77883
G01 X-77.08427 Y86.80324
G01 X-77.21485 Y86.85732
G01 X-77.23108 Y86.87352
G01 X-82.99520 Y86.87352
G01 X-83.05009 Y86.90296
G01 X-83.20694 Y86.97713
G01 X-83.27968 Y87.00735
G01 X-83.43650 Y87.06346
G01 X-83.49358 Y87.08081
G01 X-83.65040 Y87.12011
G01 X-83.69723 Y87.12945
G01 X-83.85408 Y87.15269
G01 X-83.89500 Y87.15673
G01 X-84.05184 Y87.16445
G01 X-84.09086 Y87.16445
G01 X-84.24765 Y87.15673
G01 X-84.28857 Y87.15269
G01 X-84.44542 Y87.12945
G01 X-84.49225 Y87.12011
G01 X-84.64907 Y87.08081
G01 X-84.70615 Y87.06346
G01 X-84.86297 Y87.00735
G01 X-84.93571 Y86.97713
G01 X-85.09256 Y86.90296
G01 X-85.14742 Y86.87352
G01 X-85.16866 Y86.84175
G01 X-85.24259 Y86.70344
G01 X-85.26312 Y86.65381
G01 X-85.25463 Y86.60720
G01 X-85.24699 Y86.57032
G01 X-85.22906 Y86.43558
G01 X-85.22481 Y86.35879
G01 X-85.22428 Y86.34767
G01 X-85.22113 Y86.26984
G01 X-85.22167 Y86.20088
G01 X-85.22304 Y86.17685
G01 X-85.22354 Y86.16628
G01 X-85.22126 Y86.13182
G01 X-85.20719 Y85.97677
G01 X-85.20701 Y85.97563
G01 X-85.19182 Y85.90840
G01 X-85.15964 Y85.79270
G01 X-85.14686 Y85.75813
G01 X-85.11986 Y85.69481
G01 X-85.08298 Y85.61884
G01 X-85.04602 Y85.55646
G01 X-85.00808 Y85.49900
G01 X-84.96952 Y85.44647
G01 X-84.95631 Y85.42887
G01 X-84.91618 Y85.37154
G01 X-84.89233 Y85.33367
G01 X-84.88941 Y85.31358
G01 X-84.87925 Y85.23647
G01 X-84.87318 Y85.14421
G01 X-84.87318 Y80.89182
G01 X-84.87645 Y80.82405
G01 X-84.88199 Y80.76693
G01 X-84.90343 Y80.64796
G01 X-84.92078 Y80.63155
G01 X-84.94051 Y80.61346
G01 X-84.97374 Y80.58100
G01 X-84.99550 Y80.55835
G01 X-85.06408 Y80.49573
G01 X-85.07963 Y80.48331
G01 X-85.08910 Y80.47435
G01 X-85.13685 Y80.42461
G01 X-85.20782 Y80.34298
G01 X-85.23668 Y80.30363
G01 X-85.27462 Y80.24620
G01 X-85.31158 Y80.18380
G01 X-85.34846 Y80.10788
G01 X-85.37546 Y80.04453
G01 X-85.38824 Y80.00998
G01 X-85.42042 Y79.89426
G01 X-85.43561 Y79.82700
G01 X-85.43579 Y79.82586
G01 X-85.44988 Y79.67082
G01 X-85.45214 Y79.63635
G01 X-85.44986 Y79.60181
G01 X-85.43581 Y79.44679
G01 X-85.43561 Y79.44562
G01 X-85.42042 Y79.37839
G01 X-85.38824 Y79.26272
G01 X-85.37546 Y79.22812
G01 X-85.34846 Y79.16480
G01 X-85.31158 Y79.08885
G01 X-85.27462 Y79.02645
G01 X-85.23668 Y78.96902
G01 X-85.21509 Y78.93960
G01 X-85.09469 Y78.88266
G01 X-85.03891 Y78.85947
G01 X-84.88207 Y78.80338
G01 X-84.84077 Y78.79081
G01 X-84.68395 Y78.75152
G01 X-84.65220 Y78.74519
G01 X-84.49535 Y78.72193
G01 X-84.46906 Y78.71933
G01 X-84.31224 Y78.71164
G01 X-84.28763 Y78.71164
G01 X-84.13081 Y78.71933
G01 X-84.10450 Y78.72193
G01 X-83.94765 Y78.74519
G01 X-83.91590 Y78.75152
G01 X-83.75908 Y78.79081
G01 X-83.71778 Y78.80338
G01 X-83.59472 Y78.84740
G01 X-83.56967 Y78.87013
G01 X-83.53371 Y78.90608
G01 X-83.42825 Y79.02241
G01 X-83.39454 Y79.06350
G01 X-83.30010 Y79.19083
G01 X-83.26665 Y79.24095
G01 X-83.18354 Y79.37966
G01 X-83.17539 Y79.39358
G01 X-83.16424 Y79.44562
G01 X-83.16406 Y79.44679
G01 X-83.14999 Y79.60181
G01 X-83.14770 Y79.63635
G01 X-83.14996 Y79.67082
G01 X-83.16406 Y79.82586
G01 X-83.16424 Y79.82700
G01 X-83.17943 Y79.89426
G01 X-83.21161 Y80.00998
G01 X-83.22439 Y80.04453
G01 X-83.25139 Y80.10788
G01 X-83.28827 Y80.18380
G01 X-83.32522 Y80.24620
G01 X-83.36317 Y80.30363
G01 X-83.39469 Y80.34659
G01 X-83.40043 Y80.35454
G01 X-83.40521 Y80.36124
G01 X-83.45101 Y80.43444
G01 X-83.45494 Y80.44163
G01 X-83.45644 Y80.45243
G01 X-83.46660 Y80.52954
G01 X-83.47267 Y80.62177
G01 X-83.47267 Y84.93063
G01 X-83.46940 Y84.99837
G01 X-83.46386 Y85.05549
G01 X-83.44379 Y85.16916
G01 X-83.40460 Y85.20840
G01 X-83.39482 Y85.21841
G01 X-83.35068 Y85.26433
G01 X-83.29279 Y85.31823
G01 X-83.28212 Y85.32831
G01 X-83.23439 Y85.37805
G01 X-83.16343 Y85.45968
G01 X-83.13457 Y85.49900
G01 X-83.09662 Y85.55646
G01 X-83.05967 Y85.61884
G01 X-83.02279 Y85.69481
G01 X-82.99579 Y85.75813
G01 X-82.98301 Y85.79273
G01 X-82.95083 Y85.90840
G01 X-82.93625 Y85.97225
G01 X-82.93564 Y85.97563
G01 X-82.93546 Y85.97672
G01 X-82.92139 Y86.13182
G01 X-82.91910 Y86.16628
G01 X-82.91961 Y86.17685
G01 X-82.92045 Y86.19151
G01 X-82.92103 Y86.20085
G01 X-82.92124 Y86.20377
G01 X-82.92053 Y86.31239
G01 X-82.91672 Y86.35889
G01 X-82.91479 Y86.39069
G01 X-82.91296 Y86.43578
G01 X-82.88944 Y86.60677
G01 X-82.88461 Y86.62775
G01 X-82.87966 Y86.65409
G01 X-82.87930 Y86.65602
G01 X-82.84156 Y86.69377
G01 X-82.77608 Y86.74873
G01 X-82.70201 Y86.79148
G01 X-82.62167 Y86.82072
G01 X-82.54717 Y86.84065
G01 X-82.42050 Y86.85732
G01 X-77.21485 Y86.85732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.75305 Y85.39550 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.75305 Y85.39550
G01 X-75.50744 Y85.14990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-75.86029 Y85.14990 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-75.86029 Y85.14990
G01 X-75.50744 Y85.14990
G01 X-74.91635 Y84.90510
G01 X-74.89278 Y84.89598
G01 X-74.82418 Y84.87142
G01 X-74.78389 Y84.85917
G01 X-74.71529 Y84.84200
G01 X-74.68028 Y84.83502
G01 X-74.61168 Y84.82483
G01 X-74.57967 Y84.82168
G01 X-74.51107 Y84.81831
G01 X-74.49555 Y84.81793
G01 X-63.87835 Y84.81793
G01 X-63.86281 Y84.81831
G01 X-63.79417 Y84.82168
G01 X-63.76217 Y84.82483
G01 X-63.69356 Y84.83502
G01 X-63.65856 Y84.84200
G01 X-63.58996 Y84.85917
G01 X-63.54967 Y84.87142
G01 X-63.48107 Y84.89598
G01 X-63.45750 Y84.90510
G01 X-62.86639 Y85.14993
G01 X-62.60777 Y85.14990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.86639 Y85.14993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.86639 Y85.14993
G01 X-62.68859 Y85.32770
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-62.02593 Y90.13110 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-62.02593 Y90.13110
G01 X-62.04396 Y90.16198
G01 X-62.08143 Y90.18202
G01 X-62.17335 Y90.20989
G01 X-62.26893 Y90.21931
G01 X-62.52999 Y90.21934
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.34053 Y92.02934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.34053 Y92.02934
G01 X-61.32288 Y92.01329
G01 X-60.83800 Y91.52840
G01 X-58.39126 Y91.52840
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-61.97569 Y93.29490 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-61.97569 Y93.29490
G01 X-61.97652 Y93.44321
G01 X-61.97071 Y93.52393
G01 X-61.96822 Y93.55164
G01 X-61.96151 Y93.61354
G01 X-61.94874 Y93.69139
G01 X-61.94157 Y93.72380
G01 X-61.93472 Y93.75898
G01 X-61.93261 Y93.77143
G01 X-61.91902 Y93.92487
G01 X-61.91681 Y93.95931
G01 X-61.91902 Y93.99378
G01 X-61.93261 Y94.14722
G01 X-61.93472 Y94.15969
G01 X-61.94950 Y94.22705
G01 X-61.97749 Y94.33020
G01 X-61.99768 Y94.38656
G01 X-62.02397 Y94.45006
G01 X-62.04958 Y94.50419
G01 X-62.10271 Y94.59693
G01 X-62.13990 Y94.65502
G01 X-62.14721 Y94.66530
G01 X-62.24612 Y94.78341
G01 X-62.26890 Y94.80935
G01 X-62.29484 Y94.83213
G01 X-62.41292 Y94.93104
G01 X-62.42321 Y94.93835
G01 X-62.48132 Y94.97554
G01 X-62.57406 Y95.02867
G01 X-62.62819 Y95.05428
G01 X-62.69169 Y95.08057
G01 X-62.74805 Y95.10076
G01 X-62.85120 Y95.12875
G01 X-62.91856 Y95.14353
G01 X-62.93103 Y95.14564
G01 X-63.08447 Y95.15923
G01 X-63.11973 Y95.16147
G01 X-63.15186 Y95.16060
G01 X-63.17518 Y95.15992
G01 X-63.30261 Y95.16738
G01 X-63.32872 Y95.18554
G01 X-63.37883 Y95.22197
G01 X-63.46344 Y95.29416
G01 X-63.97810 Y95.80881
G01 X-63.99722 Y95.82870
G01 X-64.00776 Y95.84010
G01 X-64.09024 Y95.94843
G01 X-64.09120 Y95.95440
G01 X-64.10088 Y96.01559
G01 X-64.10967 Y96.12646
G01 X-64.10967 Y96.53251
G01 X-64.10713 Y96.59212
G01 X-64.10428 Y96.62565
G01 X-64.06616 Y96.80525
G01 X-64.04538 Y96.86647
G01 X-63.98015 Y97.01493
G01 X-63.91160 Y97.05796
G01 X-63.89839 Y97.06626
G01 X-63.85567 Y97.08394
G01 X-63.79702 Y97.10131
G01 X-63.69631 Y97.11998
G01 X-63.59392 Y97.11732
G01 X-63.49430 Y97.09342
G01 X-63.43662 Y97.07299
G01 X-63.36639 Y97.04173
G01 X-63.30187 Y96.99984
G01 X-63.21363 Y96.93213
G01 X-63.21292 Y96.93172
G01 X-63.21292 Y96.96240
G01 X-63.23936 Y96.98008
G01 X-63.39090 Y97.10444
G01 X-63.45882 Y97.17236
G01 X-63.58318 Y97.32389
G01 X-63.62293 Y97.38338
G01 X-63.62293 Y100.49722
G01 X-63.58318 Y100.55673
G01 X-63.45882 Y100.70827
G01 X-63.39090 Y100.77619
G01 X-63.23936 Y100.90054
G01 X-63.21292 Y100.91822
G01 X-63.21292 Y100.94893
G01 X-63.21363 Y100.94853
G01 X-63.37068 Y100.82803
G01 X-63.43807 Y100.76062
G01 X-63.47114 Y100.73047
G01 X-63.48506 Y100.71888
G01 X-63.56745 Y100.66341
G01 X-63.65935 Y100.62569
G01 X-63.70756 Y100.61142
G01 X-63.72008 Y100.61528
G01 X-63.84376 Y100.66173
G01 X-63.92039 Y100.69648
G01 X-63.98137 Y100.72742
G01 X-64.03545 Y100.75795
G01 X-64.09356 Y100.79447
G01 X-64.12107 Y100.81368
G01 X-64.15170 Y100.83171
G01 X-64.27599 Y100.90077
G01 X-64.32475 Y100.92384
G01 X-64.38831 Y100.95018
G01 X-64.43911 Y100.96834
G01 X-64.57578 Y101.00738
G01 X-64.60923 Y101.01604
G01 X-64.64340 Y101.02084
G01 X-64.78467 Y101.03710
G01 X-64.83855 Y101.03974
G01 X-64.90730 Y101.03974
G01 X-64.96118 Y101.03710
G01 X-65.10245 Y101.02084
G01 X-65.13664 Y101.01604
G01 X-65.17007 Y101.00738
G01 X-65.23453 Y100.98899
G01 X-65.30674 Y100.96836
G01 X-65.35754 Y100.95018
G01 X-65.42110 Y100.92386
G01 X-65.46986 Y100.90080
G01 X-65.59415 Y100.83174
G01 X-65.62386 Y100.81424
G01 X-65.65142 Y100.79343
G01 X-65.76280 Y100.70504
G01 X-65.80276 Y100.66885
G01 X-65.84563 Y100.62970
G01 X-65.85381 Y100.62211
G01 X-65.86839 Y100.60837
G01 X-66.01472 Y100.50057
G01 X-66.01512 Y100.50034
G01 X-66.07149 Y100.46514
G01 X-66.09051 Y100.45226
G01 X-66.12292 Y100.43123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.70756 Y100.61142 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.70756 Y100.61142
G01 X-63.66270 Y100.55673
G01 X-63.62293 Y100.49722
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.86294 Y99.78033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.86294 Y99.78033
G01 X-60.88943 Y99.78033
G01 X-60.90452 Y99.93344
G01 X-60.92326 Y100.02765
G01 X-60.98016 Y100.21523
G01 X-61.01691 Y100.30398
G01 X-61.10932 Y100.47687
G01 X-61.16268 Y100.55673
G01 X-61.28707 Y100.70827
G01 X-61.35499 Y100.77619
G01 X-61.50652 Y100.90054
G01 X-61.53291 Y100.91820
G01 X-61.53291 Y100.94893
G01 X-61.53223 Y100.94853
G01 X-61.37521 Y100.82803
G01 X-61.23520 Y100.68805
G01 X-61.11470 Y100.53103
G01 X-61.01574 Y100.35960
G01 X-60.93998 Y100.17675
G01 X-60.88877 Y99.98554
G01 X-60.86294 Y99.78929
G01 X-60.86294 Y99.78033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-60.86294 Y98.09136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-60.86294 Y98.09136
G01 X-60.88877 Y97.89512
G01 X-60.93998 Y97.70390
G01 X-61.01574 Y97.52105
G01 X-61.11470 Y97.34962
G01 X-61.23520 Y97.19260
G01 X-61.37521 Y97.05262
G01 X-61.53223 Y96.93213
G01 X-61.53291 Y96.93172
G01 X-61.53291 Y96.96243
G01 X-61.50652 Y96.98008
G01 X-61.35499 Y97.10444
G01 X-61.28707 Y97.17236
G01 X-61.16268 Y97.32389
G01 X-61.10932 Y97.40375
G01 X-61.01691 Y97.57665
G01 X-60.98016 Y97.66540
G01 X-60.92326 Y97.85298
G01 X-60.90452 Y97.94719
G01 X-60.88943 Y98.10032
G01 X-60.86294 Y98.10032
G01 X-60.86294 Y98.09136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.62293 Y97.38338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.62293 Y97.38338
G01 X-63.66270 Y97.32389
G01 X-63.78706 Y97.17236
G01 X-63.85498 Y97.10444
G01 X-63.91152 Y97.05801
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-68.62094 Y100.46852 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-68.62094 Y100.46852
G01 X-68.64789 Y100.45564
G01 X-68.64789 Y100.45561
G01 X-68.72896 Y100.30398
G01 X-68.76572 Y100.21523
G01 X-68.82259 Y100.02765
G01 X-68.84136 Y99.93344
G01 X-68.86059 Y99.73834
G01 X-68.86292 Y99.69031
G01 X-68.86292 Y98.19031
G01 X-68.86059 Y98.14228
G01 X-68.84136 Y97.94719
G01 X-68.82259 Y97.85298
G01 X-68.76572 Y97.66540
G01 X-68.72896 Y97.57665
G01 X-68.63656 Y97.40375
G01 X-68.58319 Y97.32389
G01 X-68.45878 Y97.17236
G01 X-68.42607 Y97.13962
G01 X-68.40389 Y97.11747
G01 X-68.40389 Y94.99814
G01 X-68.47583 Y94.93914
G01 X-68.54375 Y94.87119
G01 X-68.64946 Y94.74239
G01 X-68.70280 Y94.66253
G01 X-68.78139 Y94.51557
G01 X-68.81814 Y94.42682
G01 X-68.86648 Y94.26739
G01 X-68.88289 Y94.18496
G01 X-68.88406 Y94.17308
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.12292 Y97.38336 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.12292 Y97.38336
G01 X-66.16270 Y97.32389
G01 X-66.28703 Y97.17236
G01 X-66.35498 Y97.10444
G01 X-66.50651 Y96.98008
G01 X-66.58637 Y96.92669
G01 X-66.72391 Y96.85318
G01 X-66.72391 Y94.99812
G01 X-66.65206 Y94.93914
G01 X-66.58411 Y94.87119
G01 X-66.47842 Y94.74239
G01 X-66.42503 Y94.66253
G01 X-66.34649 Y94.51557
G01 X-66.30974 Y94.42682
G01 X-66.26135 Y94.26739
G01 X-66.24263 Y94.17318
G01 X-66.22630 Y94.00734
G01 X-66.22630 Y93.91128
G01 X-66.24263 Y93.74547
G01 X-66.25201 Y93.69822
G01 X-66.26135 Y93.65126
G01 X-66.30974 Y93.49180
G01 X-66.34649 Y93.40305
G01 X-66.40016 Y93.30262
G01 X-66.40075 Y93.30219
G01 X-66.44799 Y93.26843
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-64.28625 Y93.30932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-64.28625 Y93.30932
G01 X-66.31393 Y93.30932
G01 X-66.36191 Y93.30696
G01 X-66.39120 Y93.30409
G01 X-66.40075 Y93.30219
G01 X-66.40080 Y93.30219
G01 X-66.44799 Y93.26843
G01 X-66.47456 Y93.24806
G01 X-66.49963 Y93.22949
G01 X-66.52297 Y93.21278
G01 X-66.56872 Y93.17775
G01 X-66.59188 Y93.15875
G01 X-66.65200 Y93.10429
G01 X-66.65264 Y93.10366
G01 X-66.67321 Y93.08380
G01 X-66.70176 Y93.05720
G01 X-66.70974 Y93.04986
G01 X-66.83334 Y92.93782
G01 X-66.89602 Y92.88644
G01 X-67.03135 Y92.78608
G01 X-67.10588 Y92.73632
G01 X-67.18431 Y92.68933
G01 X-67.72541 Y92.68933
G01 X-67.77060 Y92.71070
G01 X-67.84375 Y92.74974
G01 X-67.99107 Y92.83803
G01 X-68.04834 Y92.87623
G01 X-68.18365 Y92.97658
G01 X-68.23089 Y93.01532
G01 X-68.35449 Y93.12736
G01 X-68.39589 Y93.16876
G01 X-68.50793 Y93.29236
G01 X-68.54667 Y93.33960
G01 X-68.64702 Y93.47491
G01 X-68.68522 Y93.53216
G01 X-68.77349 Y93.67950
G01 X-68.81255 Y93.75263
G01 X-68.88822 Y93.91260
G01 X-68.89269 Y93.92223
G01 X-68.89226 Y94.00643
G01 X-68.88406 Y94.17308
G01 X-68.88294 Y94.18466
G01 X-68.88294 Y100.53943
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.57790 Y102.99897 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.57790 Y102.99897
G01 X-73.99474 Y102.99897
G01 X-74.23317 Y102.89155
G01 X-74.29433 Y102.87560
G01 X-74.29949 Y102.87428
G01 X-74.33462 Y102.86536
G01 X-74.40220 Y102.85165
G01 X-74.40510 Y102.85121
G01 X-74.46964 Y102.83823
G01 X-74.50302 Y102.82988
G01 X-74.53530 Y102.81832
G01 X-74.59890 Y102.79198
G01 X-74.62997 Y102.77727
G01 X-74.65941 Y102.75965
G01 X-74.71668 Y102.72137
G01 X-74.74427 Y102.70092
G01 X-74.76972 Y102.67786
G01 X-74.79461 Y102.65414
G01 X-76.74327 Y100.70547
G01 X-76.76700 Y100.68058
G01 X-76.79008 Y100.65510
G01 X-76.81053 Y100.62755
G01 X-76.84881 Y100.57027
G01 X-76.86644 Y100.54083
G01 X-76.88112 Y100.50977
G01 X-76.90746 Y100.44616
G01 X-76.91901 Y100.41383
G01 X-76.92737 Y100.38051
G01 X-76.94081 Y100.31304
G01 X-76.94584 Y100.27903
G01 X-76.94754 Y100.24474
G01 X-76.94838 Y100.21030
G01 X-76.94838 Y92.64110
G01 X-76.94754 Y92.60666
G01 X-76.94584 Y92.57242
G01 X-76.94081 Y92.53838
G01 X-76.92737 Y92.47095
G01 X-76.91901 Y92.43762
G01 X-76.90746 Y92.40529
G01 X-76.88112 Y92.34168
G01 X-76.86644 Y92.31062
G01 X-76.84881 Y92.28118
G01 X-76.81053 Y92.22391
G01 X-76.79008 Y92.19637
G01 X-76.76700 Y92.17087
G01 X-76.74327 Y92.14598
G01 X-76.68282 Y92.08553
G01 X-76.61396 Y92.01664
G01 X-76.54449 Y91.93574
G01 X-76.50919 Y91.88781
G01 X-76.39158 Y91.65797
G01 X-76.36969 Y91.59332
G01 X-76.36202 Y91.56937
G01 X-76.36202 Y91.56935
G01 X-76.36669 Y91.54999
G01 X-76.36672 Y91.54999
G01 X-76.40121 Y91.52035
G01 X-76.47662 Y91.45876
G01 X-76.56702 Y91.39419
G01 X-76.61244 Y91.36620
G01 X-76.62084 Y91.36094
G01 X-76.67307 Y91.32782
G01 X-76.71688 Y91.30216
G01 X-76.81033 Y91.25190
G01 X-76.83009 Y91.24087
G01 X-76.86727 Y91.21311
G01 X-76.91772 Y91.17278
G01 X-76.97962 Y91.12332
G01 X-76.98912 Y91.11433
G01 X-77.03685 Y91.06460
G01 X-77.10781 Y90.98296
G01 X-77.13667 Y90.94364
G01 X-77.17461 Y90.88619
G01 X-77.21157 Y90.82381
G01 X-77.24845 Y90.74786
G01 X-77.26359 Y90.71454
G01 X-77.27616 Y90.68479
G01 X-77.30291 Y90.62848
G01 X-77.32755 Y90.58182
G01 X-77.34947 Y90.54316
G01 X-77.37881 Y90.49465
G01 X-77.50309 Y90.46424
G01 X-77.56428 Y90.45457
G01 X-77.67515 Y90.44578
G01 X-84.29721 Y90.44578
G01 X-84.32621 Y90.43470
G01 X-84.39484 Y90.41014
G01 X-84.45476 Y90.39190
G01 X-84.52334 Y90.37473
G01 X-84.57701 Y90.36404
G01 X-84.64564 Y90.35386
G01 X-84.69576 Y90.34890
G01 X-84.76436 Y90.34552
G01 X-84.81341 Y90.34552
G01 X-84.82113 Y90.34591
G01 X-84.86909 Y90.32604
G01 X-84.89119 Y90.31751
G01 X-84.92060 Y90.30699
G01 X-84.96086 Y90.29472
G01 X-84.99027 Y90.28736
G01 X-85.02715 Y90.28002
G01 X-85.05654 Y90.27565
G01 X-85.09162 Y90.27219
G01 X-85.12106 Y90.27075
G01 X-85.13815 Y90.27031
G01 X-86.93972 Y90.27031
G01 X-86.95682 Y90.27075
G01 X-86.98620 Y90.27219
G01 X-87.02143 Y90.27567
G01 X-87.05082 Y90.28004
G01 X-87.08742 Y90.28733
G01 X-87.11681 Y90.29470
G01 X-87.15722 Y90.30699
G01 X-87.18663 Y90.31751
G01 X-87.20876 Y90.32607
G01 X-87.83515 Y90.58550
G01 X-88.85486 Y90.58555
G01 X-88.98828 Y90.56574
G01 X-89.07965 Y90.55673
G01 X-89.12097 Y90.55469
G01 X-89.24129 Y90.59775
G01 X-89.31747 Y90.62922
G01 X-89.46804 Y90.70041
G01 X-89.52364 Y90.73011
G01 X-89.66232 Y90.81321
G01 X-89.70456 Y90.84141
G01 X-89.83189 Y90.93585
G01 X-89.86598 Y90.96381
G01 X-89.98234 Y91.06925
G01 X-90.01200 Y91.09891
G01 X-90.11744 Y91.21527
G01 X-90.14540 Y91.24936
G01 X-90.23984 Y91.37669
G01 X-90.26804 Y91.41893
G01 X-90.35114 Y91.55761
G01 X-90.38084 Y91.61321
G01 X-90.45203 Y91.76378
G01 X-90.48350 Y91.83996
G01 X-90.54195 Y92.00331
G01 X-90.54886 Y92.02617
G01 X-90.53446 Y92.09863
G01 X-90.48894 Y92.24870
G01 X-90.45219 Y92.33744
G01 X-90.37825 Y92.47575
G01 X-90.32488 Y92.55563
G01 X-90.22539 Y92.67686
G01 X-90.15747 Y92.74478
G01 X-90.10850 Y92.78497
G01 X-90.03624 Y92.84427
G01 X-89.95638 Y92.89764
G01 X-89.81807 Y92.97155
G01 X-89.72933 Y93.00831
G01 X-89.57924 Y93.05385
G01 X-89.48503 Y93.07257
G01 X-89.32897 Y93.08796
G01 X-89.23291 Y93.08796
G01 X-89.07683 Y93.07257
G01 X-88.98262 Y93.05385
G01 X-88.83255 Y93.00831
G01 X-88.74381 Y92.97155
G01 X-88.60550 Y92.89764
G01 X-88.52562 Y92.84427
G01 X-88.40439 Y92.74478
G01 X-88.33647 Y92.67686
G01 X-88.23698 Y92.55563
G01 X-88.22275 Y92.53432
G01 X-88.03893 Y92.53432
G01 X-87.99090 Y92.53196
G01 X-87.92260 Y92.52525
G01 X-87.82839 Y92.50651
G01 X-87.76273 Y92.48659
G01 X-87.67398 Y92.44984
G01 X-87.61348 Y92.41748
G01 X-87.53362 Y92.36411
G01 X-87.48059 Y92.32060
G01 X-87.43141 Y92.27140
G01 X-87.42593 Y92.24423
G01 X-87.41036 Y92.16587
G01 X-87.39697 Y92.07633
G01 X-87.39649 Y92.07140
G01 X-87.38702 Y92.00386
G01 X-87.38496 Y91.99259
G01 X-87.37630 Y91.93120
G01 X-87.36944 Y91.86157
G01 X-87.36723 Y91.83323
G01 X-87.36507 Y91.79520
G01 X-87.36294 Y91.76782
G01 X-87.35890 Y91.72685
G01 X-87.35648 Y91.69416
G01 X-87.31887 Y91.61458
G01 X-87.29050 Y91.56145
G01 X-87.20736 Y91.42276
G01 X-87.18061 Y91.38268
G01 X-87.08618 Y91.25535
G01 X-87.05979 Y91.22317
G01 X-86.95435 Y91.10684
G01 X-86.92641 Y91.07890
G01 X-86.81008 Y90.97346
G01 X-86.79004 Y90.95642
G01 X-86.77505 Y90.95238
G01 X-86.61823 Y90.91309
G01 X-86.58598 Y90.90666
G01 X-86.42913 Y90.88339
G01 X-86.40228 Y90.88073
G01 X-86.24546 Y90.87303
G01 X-86.22039 Y90.87303
G01 X-86.06355 Y90.88073
G01 X-86.03670 Y90.88339
G01 X-85.87988 Y90.90666
G01 X-85.84762 Y90.91309
G01 X-85.69080 Y90.95238
G01 X-85.64894 Y90.96511
G01 X-85.49210 Y91.02121
G01 X-85.43571 Y91.04463
G01 X-85.43167 Y91.04654
G01 X-85.40797 Y91.09627
G01 X-85.37500 Y91.15797
G01 X-85.35954 Y91.18499
G01 X-85.34785 Y91.20420
G01 X-85.33292 Y91.23033
G01 X-85.31476 Y91.26429
G01 X-85.28773 Y91.30938
G01 X-85.25098 Y91.36437
G01 X-85.24943 Y91.36671
G01 X-85.23424 Y91.38967
G01 X-85.22062 Y91.41133
G01 X-85.13749 Y91.55002
G01 X-85.10523 Y91.61050
G01 X-85.09512 Y91.63183
G01 X-85.08298 Y91.76587
G01 X-85.08072 Y91.80031
G01 X-85.08298 Y91.83478
G01 X-85.09705 Y91.98989
G01 X-85.09723 Y91.99096
G01 X-85.11242 Y92.05827
G01 X-85.14460 Y92.17392
G01 X-85.15738 Y92.20851
G01 X-85.18440 Y92.27189
G01 X-85.21031 Y92.32528
G01 X-85.22126 Y92.34781
G01 X-85.25827 Y92.41024
G01 X-85.29619 Y92.46764
G01 X-85.32504 Y92.50696
G01 X-85.39601 Y92.58860
G01 X-85.41425 Y92.60877
G01 X-85.42817 Y92.62357
G01 X-85.43607 Y92.63185
G01 X-85.44313 Y92.63912
G01 X-85.51039 Y92.71920
G01 X-85.51417 Y92.74105
G01 X-85.52387 Y92.80224
G01 X-85.53269 Y92.91326
G01 X-85.53269 Y93.19731
G01 X-85.53353 Y93.23175
G01 X-85.53520 Y93.26607
G01 X-85.54026 Y93.30005
G01 X-85.55367 Y93.36751
G01 X-85.56203 Y93.40084
G01 X-85.57358 Y93.43317
G01 X-85.59992 Y93.49675
G01 X-85.61460 Y93.52784
G01 X-85.63226 Y93.55725
G01 X-85.67053 Y93.61455
G01 X-85.69098 Y93.64211
G01 X-85.71407 Y93.66759
G01 X-85.73777 Y93.69248
G01 X-86.36860 Y94.32329
G01 X-86.38773 Y94.34318
G01 X-86.39827 Y94.35461
G01 X-86.48072 Y94.46291
G01 X-86.48171 Y94.46888
G01 X-86.49139 Y94.53007
G01 X-86.50017 Y94.64094
G01 X-86.50017 Y95.01384
G01 X-86.49862 Y95.06025
G01 X-86.49690 Y95.08643
G01 X-86.46713 Y95.24976
G01 X-86.46266 Y95.26472
G01 X-86.44508 Y95.27787
G01 X-86.42369 Y95.29449
G01 X-86.38603 Y95.32476
G01 X-86.36240 Y95.34295
G01 X-86.33297 Y95.36469
G01 X-86.30731 Y95.38455
G01 X-86.28448 Y95.40310
G01 X-86.25816 Y95.42555
G01 X-86.23584 Y95.45169
G01 X-86.21729 Y95.47452
G01 X-86.19019 Y95.51013
G01 X-86.17861 Y95.53172
G01 X-86.16515 Y95.55786
G01 X-86.14206 Y95.60739
G01 X-86.13822 Y95.62070
G01 X-86.13040 Y95.64904
G01 X-86.11529 Y95.71668
G01 X-86.11481 Y95.71935
G01 X-86.11351 Y95.74605
G01 X-86.11267 Y95.78031
G01 X-86.11267 Y96.07978
G01 X-86.11290 Y96.08031
G01 X-86.12748 Y96.11323
G01 X-86.14081 Y96.14147
G01 X-86.17155 Y96.19908
G01 X-86.18717 Y96.22509
G01 X-86.19144 Y96.23208
G01 X-86.23888 Y96.26342
G01 X-86.26827 Y96.28105
G01 X-86.31486 Y96.30602
G01 X-86.34427 Y96.31993
G01 X-86.38387 Y96.33637
G01 X-86.41328 Y96.34688
G01 X-86.44808 Y96.35748
G01 X-86.47749 Y96.36484
G01 X-86.50932 Y96.37119
G01 X-86.53871 Y96.37556
G01 X-86.56870 Y96.37851
G01 X-86.59812 Y96.37998
G01 X-86.61292 Y96.38034
G01 X-86.98516 Y96.38034
G01 X-86.99720 Y96.38336
G01 X-87.02542 Y96.38897
G01 X-87.09405 Y96.39916
G01 X-87.11950 Y96.40167
G01 X-87.18813 Y96.40505
G01 X-87.21269 Y96.40505
G01 X-87.28133 Y96.40167
G01 X-87.30675 Y96.39916
G01 X-87.37538 Y96.38897
G01 X-87.40360 Y96.38336
G01 X-87.41564 Y96.38034
G01 X-87.78793 Y96.38034
G01 X-87.80271 Y96.37998
G01 X-87.83212 Y96.37851
G01 X-87.86210 Y96.37556
G01 X-87.89151 Y96.37119
G01 X-87.92336 Y96.36484
G01 X-87.95277 Y96.35748
G01 X-87.98757 Y96.34688
G01 X-88.01699 Y96.33637
G01 X-88.05658 Y96.31993
G01 X-88.08600 Y96.30602
G01 X-88.13258 Y96.28105
G01 X-88.16197 Y96.26342
G01 X-88.21770 Y96.22603
G01 X-88.24711 Y96.20421
G01 X-88.31620 Y96.14732
G01 X-88.34561 Y96.12067
G01 X-88.35610 Y96.11102
G01 X-88.35669 Y96.08031
G01 X-88.35669 Y95.87582
G01 X-88.31920 Y95.78031
G01 X-88.31102 Y95.75504
G01 X-88.30728 Y95.74379
G01 X-88.29755 Y95.71519
G01 X-88.29059 Y95.69568
G01 X-88.27307 Y95.64856
G01 X-88.26339 Y95.62075
G01 X-88.25984 Y95.60988
G01 X-88.23571 Y95.55786
G01 X-88.22224 Y95.53172
G01 X-88.21023 Y95.50937
G01 X-88.18524 Y95.47312
G01 X-88.18043 Y95.46609
G01 X-88.16870 Y95.44864
G01 X-88.16027 Y95.43637
G01 X-88.12743 Y95.38961
G01 X-88.11028 Y95.36416
G01 X-88.06479 Y95.29370
G01 X-88.04782 Y95.26639
G01 X-88.04688 Y95.26484
G01 X-88.01236 Y95.21105
G01 X-88.01236 Y95.20523
G01 X-88.04040 Y95.01181
G01 X-88.04617 Y94.97216
G01 X-88.07304 Y94.92563
G01 X-88.08252 Y94.92060
G01 X-88.14371 Y94.88943
G01 X-88.39623 Y94.80508
G01 X-88.45742 Y94.79538
G01 X-88.56847 Y94.78656
G01 X-94.39279 Y94.78656
G01 X-94.42030 Y94.78712
G01 X-94.43585 Y94.78773
G01 X-94.57082 Y94.80602
G01 X-94.57572 Y94.80955
G01 X-94.62584 Y94.84597
G01 X-94.71044 Y94.91816
G01 X-95.56508 Y95.77279
G01 X-95.58420 Y95.79271
G01 X-95.59477 Y95.80411
G01 X-95.67724 Y95.91244
G01 X-95.67821 Y95.91839
G01 X-95.68789 Y95.97957
G01 X-95.69668 Y96.09045
G01 X-95.69668 Y96.81831
G01 X-95.69485 Y96.86865
G01 X-95.69282 Y96.89707
G01 X-95.66940 Y97.03500
G01 X-95.64755 Y97.05628
G01 X-95.61877 Y97.08590
G01 X-95.60478 Y97.10114
G01 X-95.52256 Y97.17764
G01 X-95.51700 Y97.18204
G01 X-95.51509 Y97.18356
G01 X-95.47509 Y97.21983
G01 X-95.47316 Y97.22158
G01 X-95.43211 Y97.25905
G01 X-95.42403 Y97.26654
G01 X-95.40933 Y97.28041
G01 X-95.26312 Y97.38808
G01 X-95.26272 Y97.38831
G01 X-95.20635 Y97.42351
G01 X-95.18733 Y97.43639
G01 X-95.15492 Y97.45742
G01 X-95.15492 Y100.43923
G01 X-95.12251 Y100.46026
G01 X-95.10348 Y100.47314
G01 X-95.04712 Y100.50834
G01 X-95.04672 Y100.50857
G01 X-94.90039 Y100.61637
G01 X-94.88581 Y100.63011
G01 X-94.87763 Y100.63771
G01 X-94.83475 Y100.67685
G01 X-94.79480 Y100.71307
G01 X-94.71794 Y100.77405
G01 X-94.68431 Y100.80253
G01 X-94.64801 Y100.83522
G01 X-94.63145 Y100.84969
G01 X-94.60834 Y100.86933
G01 X-94.60511 Y100.87758
G01 X-94.57956 Y100.94456
G01 X-94.57433 Y100.95866
G01 X-94.55624 Y101.00918
G01 X-94.52990 Y101.07278
G01 X-94.51525 Y101.10380
G01 X-94.49757 Y101.13329
G01 X-94.45929 Y101.19056
G01 X-94.43887 Y101.21810
G01 X-94.41575 Y101.24360
G01 X-94.39206 Y101.26849
G01 X-93.20506 Y102.45548
G01 X-93.18017 Y102.47918
G01 X-93.15469 Y102.50229
G01 X-93.12714 Y102.52272
G01 X-93.10666 Y102.53735
G01 X-93.06986 Y102.56099
G01 X-93.04042 Y102.57862
G01 X-93.00936 Y102.59333
G01 X-92.94575 Y102.61967
G01 X-92.91345 Y102.63122
G01 X-92.88010 Y102.63958
G01 X-92.81266 Y102.65299
G01 X-92.77865 Y102.65805
G01 X-92.74438 Y102.65972
G01 X-92.70992 Y102.66056
G01 X-90.39676 Y102.66056
G01 X-90.28574 Y102.66938
G01 X-90.22455 Y102.67908
G01 X-90.20004 Y102.68337
G01 X-90.12041 Y102.75071
G01 X-90.10418 Y102.76656
G01 X-90.08998 Y102.78004
G01 X-90.07014 Y102.79838
G01 X-90.06435 Y102.80377
G01 X-90.06062 Y102.80730
G01 X-89.94827 Y102.89711
G01 X-89.89552 Y102.93542
G01 X-89.89222 Y102.93757
G01 X-89.80431 Y103.00560
G01 X-89.76816 Y103.03813
G01 X-89.75734 Y103.04771
G01 X-89.70616 Y103.09216
G01 X-89.59372 Y103.20946
G01 X-89.57924 Y103.21385
G01 X-89.48503 Y103.23257
G01 X-89.32897 Y103.24796
G01 X-89.23291 Y103.24796
G01 X-89.07683 Y103.23257
G01 X-88.98262 Y103.21385
G01 X-88.83255 Y103.16831
G01 X-88.74381 Y103.13155
G01 X-88.60550 Y103.05764
G01 X-88.52562 Y103.00427
G01 X-88.40439 Y102.90478
G01 X-88.33647 Y102.83686
G01 X-88.23698 Y102.71563
G01 X-88.18361 Y102.63575
G01 X-88.10970 Y102.49744
G01 X-88.07294 Y102.40870
G01 X-88.02740 Y102.25863
G01 X-88.00868 Y102.16442
G01 X-88.00192 Y102.09597
G01 X-87.99329 Y102.00834
G01 X-87.99329 Y101.91228
G01 X-87.99794 Y101.86526
G01 X-85.75799 Y99.62531
G01 X-84.15939 Y99.62531
G01 X-84.12939 Y99.66186
G01 X-84.06147 Y99.72978
G01 X-83.94024 Y99.82927
G01 X-83.86038 Y99.88264
G01 X-83.72207 Y99.95655
G01 X-83.63333 Y99.99331
G01 X-83.48324 Y100.03885
G01 X-83.38903 Y100.05757
G01 X-83.23297 Y100.07296
G01 X-83.13691 Y100.07296
G01 X-82.98083 Y100.05757
G01 X-82.88662 Y100.03885
G01 X-82.73655 Y99.99331
G01 X-82.64781 Y99.95655
G01 X-82.50950 Y99.88264
G01 X-82.42962 Y99.82927
G01 X-82.30839 Y99.72978
G01 X-82.24047 Y99.66186
G01 X-82.21050 Y99.62531
G01 X-81.29289 Y99.62531
G01 X-81.28413 Y99.62168
G01 X-81.12731 Y99.56557
G01 X-81.04542 Y99.54065
G01 X-80.88860 Y99.50139
G01 X-80.81830 Y99.48737
G01 X-80.77194 Y99.48048
G01 X-80.73849 Y99.47469
G01 X-80.67085 Y99.46123
G01 X-80.66282 Y99.45958
G01 X-80.60684 Y99.44772
G01 X-80.59874 Y99.44606
G01 X-80.53923 Y99.43423
G01 X-80.47288 Y99.41759
G01 X-80.44481 Y99.40908
G01 X-80.40994 Y99.39943
G01 X-80.40542 Y99.39829
G01 X-80.33161 Y99.37586
G01 X-80.26300 Y99.35130
G01 X-80.22185 Y99.33540
G01 X-80.12025 Y99.29331
G01 X-79.39440 Y99.29331
G01 X-79.31162 Y99.27685
G01 X-79.21975 Y99.24896
G01 X-79.21937 Y99.24850
G01 X-79.17362 Y99.19158
G01 X-79.11205 Y99.12107
G01 X-79.03377 Y99.04266
G01 X-78.99445 Y99.00840
G01 X-78.98650 Y99.00136
G01 X-78.94169 Y98.96118
G01 X-78.90199 Y98.92813
G01 X-78.86290 Y98.89793
G01 X-78.82150 Y98.86042
G01 X-78.77283 Y98.81175
G01 X-78.73529 Y98.77032
G01 X-78.67352 Y98.69036
G01 X-78.63412 Y98.63382
G01 X-78.62846 Y98.62476
G01 X-78.56082 Y98.49519
G01 X-78.54561 Y98.46420
G01 X-78.53443 Y98.43149
G01 X-78.49064 Y98.29204
G01 X-78.48825 Y98.28163
G01 X-78.47614 Y98.21378
G01 X-78.46326 Y98.11358
G01 X-78.46052 Y98.05773
G01 X-78.46052 Y97.98892
G01 X-78.46326 Y97.93309
G01 X-78.47614 Y97.83289
G01 X-78.48825 Y97.76504
G01 X-78.49064 Y97.75460
G01 X-78.53443 Y97.61516
G01 X-78.54558 Y97.58244
G01 X-78.56082 Y97.55145
G01 X-78.62843 Y97.42191
G01 X-78.63415 Y97.41282
G01 X-78.67352 Y97.35628
G01 X-78.73532 Y97.27632
G01 X-78.77283 Y97.23489
G01 X-78.82150 Y97.18623
G01 X-78.86290 Y97.14871
G01 X-78.90199 Y97.11851
G01 X-78.94169 Y97.08546
G01 X-78.98645 Y97.04533
G01 X-78.99450 Y97.03822
G01 X-79.03369 Y97.00406
G01 X-79.11210 Y96.92555
G01 X-79.17357 Y96.85516
G01 X-79.21937 Y96.79817
G01 X-79.21937 Y96.79814
G01 X-79.22086 Y96.78392
G01 X-79.22086 Y96.72273
G01 X-79.21937 Y96.70850
G01 X-79.17362 Y96.65158
G01 X-79.11205 Y96.58107
G01 X-79.03377 Y96.50266
G01 X-78.99445 Y96.46840
G01 X-78.98650 Y96.46136
G01 X-78.94169 Y96.42118
G01 X-78.90199 Y96.38813
G01 X-78.86290 Y96.35793
G01 X-78.82150 Y96.32042
G01 X-78.77283 Y96.27175
G01 X-78.73529 Y96.23032
G01 X-78.67352 Y96.15036
G01 X-78.63412 Y96.09382
G01 X-78.62846 Y96.08476
G01 X-78.56082 Y95.95519
G01 X-78.54561 Y95.92420
G01 X-78.53443 Y95.89149
G01 X-78.49064 Y95.75204
G01 X-78.48825 Y95.74163
G01 X-78.47614 Y95.67378
G01 X-78.46326 Y95.57358
G01 X-78.46052 Y95.51773
G01 X-78.46052 Y95.44892
G01 X-78.46326 Y95.39309
G01 X-78.47614 Y95.29289
G01 X-78.48825 Y95.22504
G01 X-78.49064 Y95.21460
G01 X-78.53443 Y95.07516
G01 X-78.54558 Y95.04244
G01 X-78.56082 Y95.01145
G01 X-78.62846 Y94.88189
G01 X-78.63415 Y94.87282
G01 X-78.67352 Y94.81628
G01 X-78.73529 Y94.73632
G01 X-78.77093 Y94.69334
G01 X-78.80301 Y94.65141
G01 X-78.81411 Y94.63724
G01 X-78.84197 Y94.60256
G01 X-78.90883 Y94.50538
G01 X-78.95566 Y94.42555
G01 X-78.99229 Y94.35773
G01 X-78.99407 Y94.35415
G01 X-78.98503 Y94.29695
G01 X-78.96366 Y94.21196
G01 X-78.92749 Y94.13213
G01 X-78.87771 Y94.06005
G01 X-78.84977 Y94.02647
G01 X-78.77134 Y93.95108
G01 X-78.74431 Y93.93035
G01 X-78.62290 Y93.80892
G01 X-78.60367 Y93.78387
G01 X-78.63590 Y93.78380
G01 X-78.66547 Y93.81986
G01 X-78.73339 Y93.88778
G01 X-78.85462 Y93.98727
G01 X-78.93450 Y94.04064
G01 X-79.07281 Y94.11455
G01 X-79.16156 Y94.15131
G01 X-79.31162 Y94.19685
G01 X-79.39440 Y94.21331
G01 X-80.62541 Y94.21331
G01 X-80.70824 Y94.19685
G01 X-80.85833 Y94.15131
G01 X-80.94707 Y94.11455
G01 X-81.08538 Y94.04064
G01 X-81.11037 Y94.02393
G01 X-81.16523 Y93.98727
G01 X-81.28647 Y93.88778
G01 X-81.35439 Y93.81986
G01 X-81.38436 Y93.78334
G01 X-81.41657 Y93.78334
G01 X-81.39693 Y93.80892
G01 X-81.27555 Y93.93033
G01 X-81.24857 Y93.95103
G01 X-81.19132 Y94.00257
G01 X-81.14283 Y94.06243
G01 X-81.10819 Y94.11288
G01 X-81.05937 Y94.20287
G01 X-81.03031 Y94.30104
G01 X-81.02625 Y94.35268
G01 X-81.02749 Y94.35507
G01 X-81.05226 Y94.40231
G01 X-81.06531 Y94.42347
G01 X-81.08827 Y94.46258
G01 X-81.11167 Y94.50465
G01 X-81.20473 Y94.63845
G01 X-81.20918 Y94.64359
G01 X-81.23696 Y94.67772
G01 X-81.24893 Y94.69334
G01 X-81.28456 Y94.73632
G01 X-81.34634 Y94.81628
G01 X-81.38573 Y94.87285
G01 X-81.39140 Y94.88186
G01 X-81.45904 Y95.01148
G01 X-81.47425 Y95.04247
G01 X-81.48540 Y95.07511
G01 X-81.53239 Y95.22476
G01 X-81.53569 Y95.23556
G01 X-81.55246 Y95.29202
G01 X-81.57049 Y95.34536
G01 X-81.59302 Y95.40459
G01 X-81.60918 Y95.44402
G01 X-81.62510 Y95.48013
G01 X-81.79360 Y95.52659
G01 X-81.85479 Y95.53629
G01 X-81.96584 Y95.54508
G01 X-82.06907 Y95.54508
G01 X-82.18009 Y95.53629
G01 X-82.24128 Y95.52659
G01 X-82.26579 Y95.52227
G01 X-82.34545 Y95.45494
G01 X-82.36142 Y95.43932
G01 X-82.37567 Y95.42580
G01 X-82.39571 Y95.40726
G01 X-82.40153 Y95.40183
G01 X-82.40516 Y95.39840
G01 X-82.51758 Y95.30853
G01 X-82.55477 Y95.28077
G01 X-82.57458 Y95.26972
G01 X-82.71268 Y95.19545
G01 X-82.72218 Y95.19042
G01 X-82.77681 Y95.17023
G01 X-82.90239 Y95.12964
G01 X-82.92665 Y95.12395
G01 X-82.99447 Y95.11155
G01 X-83.08994 Y95.09888
G01 X-83.14692 Y95.09609
G01 X-83.15068 Y95.09743
G01 X-83.21651 Y95.12464
G01 X-83.36706 Y95.19583
G01 X-83.41379 Y95.22077
G01 X-83.55248 Y95.30391
G01 X-83.58692 Y95.32690
G01 X-83.71425 Y95.42133
G01 X-83.74143 Y95.44361
G01 X-83.85776 Y95.54907
G01 X-83.88118 Y95.57249
G01 X-83.98664 Y95.68882
G01 X-84.00892 Y95.71600
G01 X-84.10335 Y95.84333
G01 X-84.12634 Y95.87777
G01 X-84.20948 Y96.01646
G01 X-84.23442 Y96.06319
G01 X-84.30561 Y96.21374
G01 X-84.33282 Y96.27957
G01 X-84.33447 Y96.28420
G01 X-84.32080 Y96.43487
G01 X-84.32063 Y96.43596
G01 X-84.30541 Y96.50332
G01 X-84.27323 Y96.61894
G01 X-84.26045 Y96.65356
G01 X-84.23345 Y96.71683
G01 X-84.19657 Y96.79281
G01 X-84.15962 Y96.85519
G01 X-84.12167 Y96.91264
G01 X-84.09281 Y96.95196
G01 X-84.02185 Y97.03360
G01 X-83.97412 Y97.08333
G01 X-83.96462 Y97.09230
G01 X-83.88049 Y97.15953
G01 X-83.85286 Y97.18282
G01 X-83.80003 Y97.22969
G01 X-83.79566 Y97.23357
G01 X-83.74885 Y97.27576
G01 X-83.68268 Y97.34282
G01 X-83.62098 Y97.41279
G01 X-83.57478 Y97.47109
G01 X-83.57254 Y97.50393
G01 X-83.57432 Y97.55940
G01 X-83.57856 Y97.56494
G01 X-83.62124 Y97.61726
G01 X-83.68255 Y97.68795
G01 X-83.76241 Y97.76824
G01 X-83.79998 Y97.80096
G01 X-83.80490 Y97.80528
G01 X-83.85286 Y97.84782
G01 X-83.88049 Y97.87111
G01 X-83.96464 Y97.93835
G01 X-83.96835 Y97.94188
G01 X-83.97414 Y97.94726
G01 X-84.02512 Y97.99435
G01 X-84.05108 Y98.01721
G01 X-84.09878 Y98.05722
G01 X-84.10429 Y98.06182
G01 X-84.24615 Y98.08323
G01 X-84.26574 Y98.08422
G01 X-84.30079 Y98.08508
G01 X-85.66345 Y98.08508
G01 X-85.77447 Y98.07629
G01 X-85.83566 Y98.06659
G01 X-85.93797 Y98.04310
G01 X-86.03774 Y97.94551
G01 X-86.06850 Y97.90947
G01 X-86.07302 Y97.89557
G01 X-86.10805 Y97.72199
G01 X-86.11049 Y97.69100
G01 X-86.11125 Y97.68031
G01 X-86.11343 Y97.64604
G01 X-86.11402 Y97.63583
G01 X-86.11481 Y97.61937
G01 X-86.11529 Y97.61668
G01 X-86.11648 Y97.60985
G01 X-86.12243 Y97.58082
G01 X-86.15400 Y97.55623
G01 X-86.18341 Y97.53444
G01 X-86.23891 Y97.49722
G01 X-86.26830 Y97.47960
G01 X-86.31486 Y97.45463
G01 X-86.34427 Y97.44073
G01 X-86.38387 Y97.42428
G01 X-86.41328 Y97.41376
G01 X-86.44808 Y97.40319
G01 X-86.47749 Y97.39580
G01 X-86.50932 Y97.38948
G01 X-86.53871 Y97.38511
G01 X-86.56883 Y97.38214
G01 X-86.59824 Y97.38069
G01 X-86.61292 Y97.38033
G01 X-86.98521 Y97.38033
G01 X-86.99715 Y97.37734
G01 X-87.02542 Y97.37170
G01 X-87.09403 Y97.36154
G01 X-87.11950 Y97.35902
G01 X-87.18813 Y97.35564
G01 X-87.21272 Y97.35564
G01 X-87.28133 Y97.35902
G01 X-87.30678 Y97.36154
G01 X-87.37538 Y97.37170
G01 X-87.40365 Y97.37734
G01 X-87.41559 Y97.38033
G01 X-87.78793 Y97.38033
G01 X-87.80258 Y97.38069
G01 X-87.83200 Y97.38214
G01 X-87.86210 Y97.38511
G01 X-87.89151 Y97.38945
G01 X-87.92336 Y97.39580
G01 X-87.95277 Y97.40319
G01 X-87.98757 Y97.41376
G01 X-88.01699 Y97.42428
G01 X-88.05658 Y97.44073
G01 X-88.08600 Y97.45463
G01 X-88.13256 Y97.47960
G01 X-88.16194 Y97.49722
G01 X-88.21770 Y97.53461
G01 X-88.24708 Y97.55643
G01 X-88.31617 Y97.61335
G01 X-88.34559 Y97.63997
G01 X-88.35610 Y97.64965
G01 X-88.35669 Y97.68031
G01 X-88.35669 Y97.88531
G01 X-88.32262 Y97.97304
G01 X-88.32026 Y97.98031
G01 X-88.30738 Y98.01688
G01 X-88.30121 Y98.03311
G01 X-88.29667 Y98.04536
G01 X-88.27264 Y98.11196
G01 X-88.26321 Y98.13984
G01 X-88.25961 Y98.15130
G01 X-88.23571 Y98.20279
G01 X-88.22224 Y98.22892
G01 X-88.21064 Y98.25054
G01 X-88.18356 Y98.28612
G01 X-88.16502 Y98.30896
G01 X-88.14269 Y98.33509
G01 X-88.11638 Y98.35757
G01 X-88.09354 Y98.37609
G01 X-88.05811 Y98.40304
G01 X-88.03675 Y98.41452
G01 X-88.01061 Y98.42798
G01 X-87.96090 Y98.45120
G01 X-87.94726 Y98.45508
G01 X-87.91892 Y98.46291
G01 X-87.89222 Y98.46971
G01 X-87.85186 Y98.47792
G01 X-87.84861 Y98.47848
G01 X-87.84503 Y98.47878
G01 X-87.82263 Y98.48099
G01 X-87.78793 Y98.48501
G01 X-87.73329 Y98.49344
G01 X-87.67210 Y98.50527
G01 X-87.56286 Y98.53464
G01 X-87.46642 Y98.63624
G01 X-87.42804 Y98.68437
G01 X-87.32171 Y98.85506
G01 X-87.35333 Y98.93387
G01 X-87.38036 Y98.99339
G01 X-87.48496 Y99.16331
G01 X-87.51015 Y99.19420
G01 X-87.55770 Y99.24680
G01 X-88.98940 Y100.67850
G01 X-89.07411 Y100.75076
G01 X-89.12422 Y100.78718
G01 X-89.14205 Y100.79973
G01 X-89.24632 Y100.80885
G01 X-89.26400 Y100.80913
G01 X-89.27954 Y100.80954
G01 X-89.30708 Y100.81055
G01 X-89.31533 Y100.81091
G01 X-89.37591 Y100.81388
G01 X-89.47136 Y100.82655
G01 X-89.53916 Y100.83895
G01 X-89.56346 Y100.84464
G01 X-89.68904 Y100.88523
G01 X-89.74365 Y100.90542
G01 X-89.75318 Y100.91045
G01 X-89.89128 Y100.98472
G01 X-89.91109 Y100.99579
G01 X-89.94827 Y101.02353
G01 X-90.06062 Y101.11335
G01 X-90.06435 Y101.11688
G01 X-90.07014 Y101.12226
G01 X-90.12112 Y101.16935
G01 X-90.14708 Y101.19221
G01 X-90.19478 Y101.23222
G01 X-90.20029 Y101.23682
G01 X-90.34215 Y101.25823
G01 X-90.36174 Y101.25922
G01 X-90.39676 Y101.26008
G01 X-92.23379 Y101.26008
G01 X-92.34482 Y101.25129
G01 X-92.40600 Y101.24159
G01 X-92.41182 Y101.24065
G01 X-92.52015 Y101.15815
G01 X-92.53156 Y101.14761
G01 X-92.55142 Y101.12851
G01 X-92.70077 Y100.97918
G01 X-92.77306 Y100.89445
G01 X-92.80948 Y100.84433
G01 X-92.89622 Y100.69135
G01 X-92.88512 Y100.66204
G01 X-92.86607 Y100.61596
G01 X-92.84009 Y100.55813
G01 X-92.79889 Y100.47921
G01 X-92.78063 Y100.44891
G01 X-92.77316 Y100.43633
G01 X-92.76353 Y100.41955
G01 X-92.69447 Y100.29526
G01 X-92.67141 Y100.24649
G01 X-92.64507 Y100.18292
G01 X-92.62691 Y100.13214
G01 X-92.58787 Y99.99542
G01 X-92.57921 Y99.96201
G01 X-92.57443 Y99.92788
G01 X-92.55815 Y99.78658
G01 X-92.55551 Y99.73275
G01 X-92.55467 Y99.69831
G01 X-92.55467 Y98.19832
G01 X-92.55551 Y98.16390
G01 X-92.55818 Y98.11005
G01 X-92.57443 Y97.96878
G01 X-92.57489 Y97.96474
G01 X-92.57921 Y97.93464
G01 X-92.58787 Y97.90124
G01 X-92.62691 Y97.76451
G01 X-92.64507 Y97.71373
G01 X-92.67141 Y97.65016
G01 X-92.69447 Y97.60139
G01 X-92.74873 Y97.50373
G01 X-92.76353 Y97.47711
G01 X-92.78104 Y97.44736
G01 X-92.80181 Y97.41983
G01 X-92.89020 Y97.30845
G01 X-92.92640 Y97.26850
G01 X-92.97509 Y97.21981
G01 X-93.01502 Y97.18361
G01 X-93.12642 Y97.09522
G01 X-93.15398 Y97.07442
G01 X-93.18370 Y97.05694
G01 X-93.30798 Y96.98788
G01 X-93.35675 Y96.96482
G01 X-93.42030 Y96.93848
G01 X-93.47110 Y96.92031
G01 X-93.60778 Y96.88127
G01 X-93.64123 Y96.87261
G01 X-93.67539 Y96.86781
G01 X-93.81667 Y96.85156
G01 X-93.87054 Y96.84891
G01 X-93.93930 Y96.84891
G01 X-93.99317 Y96.85156
G01 X-94.13445 Y96.86781
G01 X-94.16861 Y96.87261
G01 X-94.20206 Y96.88127
G01 X-94.33877 Y96.92031
G01 X-94.38954 Y96.93848
G01 X-94.45309 Y96.96479
G01 X-94.50183 Y96.98785
G01 X-94.62614 Y97.05694
G01 X-94.65589 Y97.07444
G01 X-94.68342 Y97.09522
G01 X-94.79480 Y97.18361
G01 X-94.83475 Y97.21981
G01 X-94.88588 Y97.26649
G01 X-94.92055 Y97.29621
G01 X-94.96925 Y97.33538
G01 X-95.04517 Y97.38938
G01 X-95.12116 Y97.43710
G01 X-95.15492 Y97.45742
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-97.65491 Y100.50519 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-97.65491 Y100.50519
G01 X-97.69469 Y100.56473
G01 X-97.81905 Y100.71627
G01 X-97.88697 Y100.78419
G01 X-98.03851 Y100.90855
G01 X-98.06492 Y100.92620
G01 X-98.06492 Y100.95693
G01 X-98.06421 Y100.95653
G01 X-97.90716 Y100.83603
G01 X-97.83978 Y100.76862
G01 X-97.78125 Y100.71868
G01 X-97.71567 Y100.67847
G01 X-97.66116 Y100.65071
G01 X-97.57968 Y100.61947
G01 X-97.56650 Y100.62407
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.15492 Y100.43923 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.15492 Y100.43923
G01 X-95.18868 Y100.45955
G01 X-95.26467 Y100.50728
G01 X-95.34054 Y100.56123
G01 X-95.38926 Y100.60042
G01 X-95.42398 Y100.63016
G01 X-95.47316 Y100.67507
G01 X-95.51507 Y100.71307
G01 X-95.62642 Y100.80143
G01 X-95.65395 Y100.82221
G01 X-95.68370 Y100.83971
G01 X-95.80800 Y100.90877
G01 X-95.85675 Y100.93184
G01 X-95.92030 Y100.95818
G01 X-95.97110 Y100.97634
G01 X-96.10783 Y101.01540
G01 X-96.14123 Y101.02404
G01 X-96.17542 Y101.02884
G01 X-96.31666 Y101.04510
G01 X-96.37051 Y101.04774
G01 X-96.43930 Y101.04774
G01 X-96.49317 Y101.04510
G01 X-96.63444 Y101.02884
G01 X-96.66861 Y101.02407
G01 X-96.70203 Y101.01538
G01 X-96.76655 Y100.99696
G01 X-96.83879 Y100.97634
G01 X-96.88956 Y100.95818
G01 X-96.95314 Y100.93184
G01 X-97.00183 Y100.90880
G01 X-97.12616 Y100.83971
G01 X-97.15682 Y100.82165
G01 X-97.17534 Y100.80872
G01 X-97.18423 Y100.80240
G01 X-97.19009 Y100.79818
G01 X-97.31923 Y100.72394
G01 X-97.35880 Y100.70616
G01 X-97.37701 Y100.69770
G01 X-97.43457 Y100.67012
G01 X-97.56650 Y100.62407
G01 X-97.61519 Y100.56473
G01 X-97.65491 Y100.50519
G01 X-97.65491 Y100.25533
G01 X-97.65494 Y100.17992
G01 X-97.65494 Y99.97507
G01 X-97.65491 Y99.91993
G01 X-97.65491 Y97.97673
G01 X-97.65494 Y97.92158
G01 X-97.65494 Y97.71673
G01 X-97.65491 Y97.64132
G01 X-97.65491 Y97.39136
G01 X-97.69469 Y97.33190
G01 X-97.81905 Y97.18036
G01 X-97.88697 Y97.11244
G01 X-98.03851 Y96.98806
G01 X-98.11839 Y96.93469
G01 X-98.26111 Y96.85841
G01 X-98.29126 Y96.84229
G01 X-98.38001 Y96.80553
G01 X-98.56761 Y96.74864
G01 X-98.66182 Y96.72989
G01 X-98.85692 Y96.71066
G01 X-98.95296 Y96.71066
G01 X-99.14805 Y96.72989
G01 X-99.24226 Y96.74864
G01 X-99.42987 Y96.80553
G01 X-99.51861 Y96.84229
G01 X-99.69149 Y96.93469
G01 X-99.77137 Y96.98806
G01 X-99.92291 Y97.11244
G01 X-99.99083 Y97.18036
G01 X-100.11518 Y97.33190
G01 X-100.16855 Y97.41175
G01 X-100.26095 Y97.58465
G01 X-100.29771 Y97.67340
G01 X-100.35463 Y97.86098
G01 X-100.37337 Y97.95519
G01 X-100.39258 Y98.15028
G01 X-100.39494 Y98.19832
G01 X-100.39494 Y99.69831
G01 X-100.39258 Y99.74634
G01 X-100.37337 Y99.94144
G01 X-100.35463 Y100.03565
G01 X-100.29771 Y100.22323
G01 X-100.26095 Y100.31198
G01 X-100.16855 Y100.48487
G01 X-100.11518 Y100.56473
G01 X-99.99083 Y100.71627
G01 X-99.92291 Y100.78419
G01 X-99.77137 Y100.90855
G01 X-99.74493 Y100.92622
G01 X-99.74493 Y100.95693
G01 X-99.74564 Y100.95653
G01 X-99.90269 Y100.83603
G01 X-99.91343 Y100.82526
G01 X-100.00380 Y100.75404
G01 X-100.04320 Y100.72988
G01 X-100.12364 Y100.69018
G01 X-100.20998 Y100.66580
G01 X-100.29933 Y100.65759
G01 X-100.36052 Y100.65759
G01 X-100.46238 Y100.66831
G01 X-100.55981 Y100.69996
G01 X-100.64851 Y100.75117
G01 X-100.69801 Y100.78713
G01 X-100.77414 Y100.85566
G01 X-100.83433 Y100.93849
G01 X-100.87599 Y101.03204
G01 X-100.89491 Y101.09023
G01 X-100.91290 Y101.16504
G01 X-100.91894 Y101.24174
G01 X-100.91894 Y103.29251
G01 X-100.91290 Y103.36930
G01 X-100.90804 Y103.39988
G01 X-100.87675 Y103.51067
G01 X-100.82052 Y103.61111
G01 X-100.78455 Y103.66061
G01 X-100.71602 Y103.73673
G01 X-100.63319 Y103.79693
G01 X-100.53964 Y103.83859
G01 X-100.48145 Y103.85751
G01 X-100.40665 Y103.87549
G01 X-100.32994 Y103.88154
G01 X-90.17347 Y103.88154
G01 X-90.10073 Y103.87610
G01 X-90.02961 Y103.85995
G01 X-89.97411 Y103.84291
G01 X-89.88229 Y103.80410
G01 X-89.80024 Y103.74753
G01 X-89.73131 Y103.67549
G01 X-89.69372 Y103.62721
G01 X-89.63959 Y103.54027
G01 X-89.63893 Y103.53841
G01 X-89.60471 Y103.44395
G01 X-89.59064 Y103.34248
G01 X-89.58861 Y103.28134
G01 X-89.59372 Y103.20946
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-85.91912 Y103.20895 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-85.91912 Y103.20895
G01 X-85.91935 Y103.20920
G01 X-85.93462 Y103.21385
G01 X-86.02883 Y103.23257
G01 X-86.18491 Y103.24796
G01 X-86.28097 Y103.24796
G01 X-86.43703 Y103.23257
G01 X-86.53124 Y103.21385
G01 X-86.68133 Y103.16831
G01 X-86.77007 Y103.13155
G01 X-86.90838 Y103.05764
G01 X-86.98824 Y103.00427
G01 X-87.10947 Y102.90478
G01 X-87.17739 Y102.83686
G01 X-87.27688 Y102.71563
G01 X-87.33025 Y102.63575
G01 X-87.40419 Y102.49744
G01 X-87.44094 Y102.40870
G01 X-87.48646 Y102.25863
G01 X-87.50520 Y102.16442
G01 X-87.52057 Y102.00834
G01 X-87.52057 Y101.91228
G01 X-87.50520 Y101.75622
G01 X-87.48646 Y101.66201
G01 X-87.44094 Y101.51192
G01 X-87.40419 Y101.42318
G01 X-87.33025 Y101.28487
G01 X-87.27688 Y101.20501
G01 X-87.17739 Y101.08378
G01 X-87.10947 Y101.01586
G01 X-86.98824 Y100.91637
G01 X-86.90838 Y100.86300
G01 X-86.77007 Y100.78906
G01 X-86.68133 Y100.75231
G01 X-86.53124 Y100.70679
G01 X-86.43703 Y100.68805
G01 X-86.28097 Y100.67268
G01 X-86.18491 Y100.67268
G01 X-86.16766 Y100.67438
G01 X-86.02883 Y100.68805
G01 X-85.93462 Y100.70679
G01 X-85.78455 Y100.75231
G01 X-85.69581 Y100.78906
G01 X-85.55750 Y100.86300
G01 X-85.47762 Y100.91637
G01 X-85.35639 Y101.01586
G01 X-85.28847 Y101.08378
G01 X-85.25850 Y101.12033
G01 X-81.75487 Y101.12033
G01 X-81.62452 Y100.98998
G01 X-81.66346 Y100.86163
G01 X-81.68220 Y100.76742
G01 X-81.69757 Y100.61134
G01 X-81.69757 Y100.51528
G01 X-81.68220 Y100.35922
G01 X-81.66346 Y100.26501
G01 X-81.61794 Y100.11492
G01 X-81.58118 Y100.02618
G01 X-81.50725 Y99.88787
G01 X-81.45388 Y99.80801
G01 X-81.35439 Y99.68678
G01 X-81.29289 Y99.62531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.40928 Y96.75331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.40928 Y96.75331
G01 X-79.40606 Y96.75333
G01 X-79.39440 Y96.75333
G01 X-79.31162 Y96.73685
G01 X-79.21975 Y96.70896
G01 X-79.21937 Y96.70850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.99407 Y94.35415 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.99407 Y94.35415
G01 X-79.07281 Y94.31206
G01 X-79.16156 Y94.27531
G01 X-79.31162 Y94.22979
G01 X-79.39440 Y94.21331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-78.60324 Y92.10333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-78.60324 Y92.10333
G01 X-78.62287 Y92.07775
G01 X-78.74433 Y91.95632
G01 X-78.88058 Y91.85177
G01 X-79.02927 Y91.76592
G01 X-79.16991 Y91.70765
G01 X-79.16991 Y91.73277
G01 X-79.16156 Y91.73531
G01 X-79.07281 Y91.77206
G01 X-78.93450 Y91.84600
G01 X-78.85462 Y91.89937
G01 X-78.73339 Y91.99886
G01 X-78.66547 Y92.06678
G01 X-78.63547 Y92.10333
G01 X-78.60324 Y92.10333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.84992 Y91.70765 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.84992 Y91.70765
G01 X-80.84992 Y91.73275
G01 X-80.85833 Y91.73531
G01 X-80.94707 Y91.77206
G01 X-81.08538 Y91.84600
G01 X-81.16523 Y91.89937
G01 X-81.28647 Y91.99886
G01 X-81.35439 Y92.06678
G01 X-81.38441 Y92.10333
G01 X-81.41659 Y92.10333
G01 X-81.39693 Y92.07773
G01 X-81.27552 Y91.95632
G01 X-81.13928 Y91.85177
G01 X-80.99053 Y91.76589
G01 X-80.84992 Y91.70765
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-80.62541 Y94.21331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-80.62541 Y94.21331
G01 X-80.70824 Y94.22979
G01 X-80.85833 Y94.27531
G01 X-80.94707 Y94.31206
G01 X-81.02749 Y94.35507
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.17357 Y96.85516 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.17357 Y96.85516
G01 X-79.21937 Y96.79814
G01 X-79.21977 Y96.79766
G01 X-79.31162 Y96.76979
G01 X-79.39440 Y96.75333
G01 X-79.40928 Y96.75331
G01 X-80.12025 Y96.75331
G01 X-80.22185 Y96.79540
G01 X-80.26300 Y96.81130
G01 X-80.33161 Y96.83586
G01 X-80.40542 Y96.85829
G01 X-80.40994 Y96.85943
G01 X-80.44481 Y96.86908
G01 X-80.47288 Y96.87759
G01 X-80.53923 Y96.89423
G01 X-80.59874 Y96.90606
G01 X-80.60684 Y96.90772
G01 X-80.66282 Y96.91958
G01 X-80.67085 Y96.92123
G01 X-80.73849 Y96.93469
G01 X-80.77194 Y96.94048
G01 X-80.81830 Y96.94737
G01 X-80.88860 Y96.96139
G01 X-81.04542 Y97.00065
G01 X-81.12731 Y97.02557
G01 X-81.28413 Y97.08168
G01 X-81.29289 Y97.08531
G01 X-81.35439 Y97.14678
G01 X-81.45388 Y97.26801
G01 X-81.50725 Y97.34787
G01 X-81.58118 Y97.48618
G01 X-81.61794 Y97.57492
G01 X-81.66346 Y97.72501
G01 X-81.68220 Y97.81922
G01 X-81.69462 Y97.94533
G01 X-82.21050 Y97.94533
G01 X-82.24047 Y97.90878
G01 X-82.30839 Y97.84086
G01 X-82.42962 Y97.74137
G01 X-82.50950 Y97.68800
G01 X-82.64781 Y97.61406
G01 X-82.73655 Y97.57731
G01 X-82.88662 Y97.53179
G01 X-82.96940 Y97.51533
G01 X-83.40041 Y97.51533
G01 X-83.48324 Y97.53179
G01 X-83.57432 Y97.55940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-83.57478 Y97.47109 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-83.57478 Y97.47109
G01 X-83.48324 Y97.49885
G01 X-83.40041 Y97.51533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-82.96940 Y97.51533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-82.96940 Y97.51533
G01 X-82.88662 Y97.49885
G01 X-82.73655 Y97.45331
G01 X-82.64781 Y97.41655
G01 X-82.50950 Y97.34264
G01 X-82.42962 Y97.28927
G01 X-82.30839 Y97.18978
G01 X-82.24047 Y97.12186
G01 X-82.21050 Y97.08531
G01 X-81.29289 Y97.08531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.39440 Y99.29331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.39440 Y99.29331
G01 X-79.31162 Y99.30979
G01 X-79.21977 Y99.33766
G01 X-79.21937 Y99.33814
G01 X-79.17357 Y99.39516
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-79.21937 Y99.24850 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-79.21937 Y99.24850
G01 X-79.22086 Y99.26273
G01 X-79.22086 Y99.32392
G01 X-79.21937 Y99.33814
G01 X-79.21937 Y99.33817
G01 X-79.17357 Y99.39516
G01 X-79.11210 Y99.46555
G01 X-79.03369 Y99.54406
G01 X-78.99450 Y99.57822
G01 X-78.98645 Y99.58533
G01 X-78.94169 Y99.62546
G01 X-78.90199 Y99.65851
G01 X-78.86290 Y99.68871
G01 X-78.82150 Y99.72623
G01 X-78.77283 Y99.77489
G01 X-78.73532 Y99.81632
G01 X-78.67352 Y99.89628
G01 X-78.63415 Y99.95282
G01 X-78.62843 Y99.96191
G01 X-78.62732 Y99.96407
G01 X-78.56082 Y100.09145
G01 X-78.54558 Y100.12244
G01 X-78.53443 Y100.15516
G01 X-78.49064 Y100.29460
G01 X-78.48825 Y100.30504
G01 X-78.47614 Y100.37289
G01 X-78.46326 Y100.47309
G01 X-78.46052 Y100.52892
G01 X-78.46052 Y100.59773
G01 X-78.46326 Y100.65358
G01 X-78.47614 Y100.75378
G01 X-78.48825 Y100.82163
G01 X-78.49064 Y100.83204
G01 X-78.53443 Y100.97149
G01 X-78.54561 Y101.00420
G01 X-78.56082 Y101.03519
G01 X-78.62846 Y101.16476
G01 X-78.63412 Y101.17382
G01 X-78.67352 Y101.23036
G01 X-78.73529 Y101.31032
G01 X-78.77283 Y101.35175
G01 X-78.82150 Y101.40042
G01 X-78.86293 Y101.43796
G01 X-78.94289 Y101.49973
G01 X-78.99943 Y101.53913
G01 X-79.00849 Y101.54479
G01 X-79.13806 Y101.61243
G01 X-79.16905 Y101.62765
G01 X-79.20176 Y101.63882
G01 X-79.34121 Y101.68261
G01 X-79.35162 Y101.68500
G01 X-79.41947 Y101.69711
G01 X-79.51967 Y101.70999
G01 X-79.57552 Y101.71274
G01 X-79.60994 Y101.71357
G01 X-79.98378 Y101.71357
G01 X-80.01136 Y101.71411
G01 X-80.02688 Y101.71472
G01 X-80.16181 Y101.73300
G01 X-80.16666 Y101.73651
G01 X-80.21680 Y101.77293
G01 X-80.30146 Y101.84517
G01 X-80.55734 Y102.10105
G01 X-80.83862 Y102.38230
G01 X-80.91177 Y102.45548
G01 X-80.93666 Y102.47918
G01 X-80.96214 Y102.50229
G01 X-80.98969 Y102.52272
G01 X-81.04700 Y102.56099
G01 X-81.07641 Y102.57865
G01 X-81.10750 Y102.59333
G01 X-81.17108 Y102.61967
G01 X-81.20341 Y102.63125
G01 X-81.23674 Y102.63958
G01 X-81.29617 Y102.65177
G01 X-81.30420 Y102.65302
G01 X-81.33813 Y102.65805
G01 X-81.37250 Y102.65972
G01 X-81.40694 Y102.66056
G01 X-85.11707 Y102.66056
G01 X-85.15204 Y102.66145
G01 X-85.17168 Y102.66242
G01 X-85.31359 Y102.68385
G01 X-85.31907 Y102.68843
G01 X-85.36678 Y102.72843
G01 X-85.39273 Y102.75129
G01 X-85.44371 Y102.79838
G01 X-85.44963 Y102.80389
G01 X-85.45329 Y102.80735
G01 X-85.56558 Y102.89711
G01 X-85.61834 Y102.93539
G01 X-85.62164 Y102.93757
G01 X-85.70498 Y103.00151
G01 X-85.74590 Y103.03778
G01 X-85.74965 Y103.04108
G01 X-85.80774 Y103.09190
G01 X-85.91912 Y103.20895
G01 X-85.92453 Y103.26193
G01 X-85.92453 Y103.32310
G01 X-85.91384 Y103.42492
G01 X-85.88222 Y103.52231
G01 X-85.83104 Y103.61098
G01 X-85.79510 Y103.66048
G01 X-85.72657 Y103.73666
G01 X-85.64371 Y103.79691
G01 X-85.55011 Y103.83859
G01 X-85.49192 Y103.85751
G01 X-85.41712 Y103.87549
G01 X-85.34041 Y103.88154
G01 X-74.49286 Y103.88154
G01 X-74.38785 Y103.87016
G01 X-74.34640 Y103.86107
G01 X-74.26385 Y103.83513
G01 X-74.18717 Y103.79510
G01 X-74.11869 Y103.74220
G01 X-74.07376 Y103.70064
G01 X-74.06621 Y103.69201
G01 X-74.00627 Y103.62363
G01 X-73.95626 Y103.53430
G01 X-73.92588 Y103.43651
G01 X-73.91394 Y103.37651
G01 X-73.90457 Y103.27448
G01 X-73.91661 Y103.17273
G01 X-73.94955 Y103.07570
G01 X-73.97518 Y103.02012
G01 X-73.98521 Y103.00328
G01 X-73.99474 Y102.99897
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-70.69993 Y101.31898 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-70.69993 Y101.31898
G01 X-70.69993 Y99.76331
G01 X-70.70935 Y99.66773
G01 X-70.73721 Y99.57581
G01 X-70.78253 Y99.49107
G01 X-70.84344 Y99.41683
G01 X-70.91768 Y99.35589
G01 X-71.00239 Y99.31061
G01 X-71.09434 Y99.28272
G01 X-71.18994 Y99.27332
G01 X-71.67988 Y99.27332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.09982 Y99.27332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.09982 Y99.27332
G01 X-73.23833 Y99.23131
G01 X-73.32707 Y99.19455
G01 X-73.46538 Y99.12064
G01 X-73.54523 Y99.06727
G01 X-73.66647 Y98.96778
G01 X-73.73439 Y98.89986
G01 X-73.75964 Y98.86910
G01 X-73.83388 Y98.77863
G01 X-73.88725 Y98.69875
G01 X-73.96118 Y98.56044
G01 X-73.99794 Y98.47170
G01 X-74.04346 Y98.32163
G01 X-74.06220 Y98.22742
G01 X-74.07757 Y98.07134
G01 X-74.07757 Y97.97528
G01 X-74.06220 Y97.81922
G01 X-74.04346 Y97.72501
G01 X-73.99794 Y97.57492
G01 X-73.96118 Y97.48618
G01 X-73.88725 Y97.34787
G01 X-73.84587 Y97.28592
G01 X-73.83388 Y97.26801
G01 X-73.73439 Y97.14678
G01 X-73.66647 Y97.07886
G01 X-73.54523 Y96.97937
G01 X-73.46538 Y96.92600
G01 X-73.32707 Y96.85206
G01 X-73.23833 Y96.81531
G01 X-73.22992 Y96.81277
G01 X-73.22992 Y96.69387
G01 X-73.23833 Y96.69131
G01 X-73.32707 Y96.65455
G01 X-73.46538 Y96.58064
G01 X-73.54523 Y96.52727
G01 X-73.66647 Y96.42778
G01 X-73.73439 Y96.35986
G01 X-73.83388 Y96.23863
G01 X-73.88725 Y96.15875
G01 X-73.96118 Y96.02044
G01 X-73.99794 Y95.93170
G01 X-74.04346 Y95.78163
G01 X-74.06220 Y95.68742
G01 X-74.07757 Y95.53134
G01 X-74.07757 Y95.43528
G01 X-74.06220 Y95.27922
G01 X-74.04346 Y95.18501
G01 X-73.99794 Y95.03492
G01 X-73.96118 Y94.94618
G01 X-73.88725 Y94.80787
G01 X-73.84587 Y94.74592
G01 X-73.83388 Y94.72801
G01 X-73.73439 Y94.60678
G01 X-73.66647 Y94.53886
G01 X-73.54523 Y94.43937
G01 X-73.46538 Y94.38600
G01 X-73.32707 Y94.31206
G01 X-73.23833 Y94.27531
G01 X-73.08824 Y94.22979
G01 X-73.00541 Y94.21331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-71.77440 Y94.21333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-71.77440 Y94.21333
G01 X-71.69162 Y94.19685
G01 X-71.54156 Y94.15131
G01 X-71.45281 Y94.11455
G01 X-71.31450 Y94.04064
G01 X-71.23462 Y93.98727
G01 X-71.11339 Y93.88778
G01 X-71.04547 Y93.81986
G01 X-71.02426 Y93.79401
G01 X-70.94598 Y93.69863
G01 X-70.89261 Y93.61875
G01 X-70.81870 Y93.48044
G01 X-70.78192 Y93.39170
G01 X-70.73640 Y93.24163
G01 X-70.71768 Y93.14742
G01 X-70.70229 Y92.99134
G01 X-70.70229 Y92.89528
G01 X-70.71768 Y92.73922
G01 X-70.73640 Y92.64501
G01 X-70.78192 Y92.49492
G01 X-70.81870 Y92.40618
G01 X-70.89261 Y92.26787
G01 X-70.94598 Y92.18801
G01 X-71.04547 Y92.06678
G01 X-71.11339 Y91.99886
G01 X-71.23074 Y91.90257
G01 X-69.04748 Y89.71931
G01 X-68.90392 Y89.71931
G01 X-68.90392 Y89.72932
G01 X-68.89452 Y89.82490
G01 X-68.86663 Y89.91682
G01 X-68.82137 Y90.00153
G01 X-68.76041 Y90.07580
G01 X-68.70862 Y90.11832
G01 X-68.68616 Y90.13674
G01 X-68.60145 Y90.18202
G01 X-68.50953 Y90.20989
G01 X-68.41390 Y90.21931
G01 X-68.15274 Y90.21931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-66.97499 Y90.21934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-66.97499 Y90.21934
G01 X-66.71390 Y90.21931
G01 X-66.61835 Y90.20989
G01 X-66.52643 Y90.18202
G01 X-66.44172 Y90.13674
G01 X-66.36745 Y90.07580
G01 X-66.30651 Y90.00153
G01 X-66.26120 Y89.91682
G01 X-66.23336 Y89.82490
G01 X-66.22391 Y89.72932
G01 X-66.22391 Y88.02932
G01 X-66.23336 Y87.93372
G01 X-66.26120 Y87.84180
G01 X-66.30651 Y87.75709
G01 X-66.36745 Y87.68284
G01 X-66.44172 Y87.62188
G01 X-66.52643 Y87.57662
G01 X-66.61835 Y87.54873
G01 X-66.71390 Y87.53931
G01 X-68.37768 Y87.53931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-69.38017 Y86.16590 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-69.38017 Y86.16590
G01 X-73.45489 Y90.24057
G01 X-73.64020 Y90.68792
G01 X-73.65293 Y90.71669
G01 X-73.68410 Y90.78261
G01 X-73.70927 Y90.82975
G01 X-73.74562 Y90.89040
G01 X-73.77132 Y90.92891
G01 X-73.81262 Y90.98461
G01 X-73.83949 Y91.01735
G01 X-73.88562 Y91.06826
G01 X-73.89977 Y91.08309
G01 X-75.55107 Y92.73442
G01 X-75.56522 Y92.74925
G01 X-75.61135 Y92.80015
G01 X-75.63822 Y92.83290
G01 X-75.67274 Y92.87945
G01 X-75.67556 Y92.89073
G01 X-75.68409 Y92.93350
G01 X-75.69428 Y93.00211
G01 X-75.69819 Y93.04166
G01 X-75.70154 Y93.11026
G01 X-75.70202 Y93.12954
G01 X-75.70202 Y99.75582
G01 X-75.70154 Y99.77512
G01 X-75.69819 Y99.84375
G01 X-75.69428 Y99.88330
G01 X-75.68409 Y99.95191
G01 X-75.68003 Y99.97502
G01 X-75.66870 Y99.99102
G01 X-75.62740 Y100.04672
G01 X-75.60205 Y100.07761
G01 X-75.55592 Y100.12851
G01 X-75.54259 Y100.14251
G01 X-74.73507 Y100.95002
G01 X-74.72110 Y100.96333
G01 X-74.67020 Y101.00949
G01 X-74.63929 Y101.03481
G01 X-74.58359 Y101.07614
G01 X-74.54719 Y101.10042
G01 X-74.48651 Y101.13679
G01 X-74.44175 Y101.16067
G01 X-74.37587 Y101.19183
G01 X-74.34843 Y101.20400
G01 X-74.01762 Y101.34103
G01 X-74.00838 Y101.36333
G01 X-73.98841 Y101.40801
G01 X-73.58994 Y101.58614
G01 X-71.18994 Y101.58614
G01 X-70.74427 Y101.36331
G01 X-70.69993 Y101.31898
G01 X-70.62050 Y101.31898
G01 X-70.56292 Y101.26140
G01 X-70.56292 Y93.57831
G01 X-70.56056 Y93.53030
G01 X-70.55385 Y93.46200
G01 X-70.53511 Y93.36779
G01 X-70.51519 Y93.30213
G01 X-70.47844 Y93.21339
G01 X-70.44605 Y93.15288
G01 X-70.39271 Y93.07303
G01 X-70.34920 Y93.01999
G01 X-70.31689 Y92.98436
G01 X-68.89244 Y91.55992
G01 X-68.90158 Y91.46734
G01 X-68.90158 Y91.37128
G01 X-68.88525 Y91.20547
G01 X-68.86648 Y91.11126
G01 X-68.81814 Y90.95180
G01 X-68.78139 Y90.86305
G01 X-68.70280 Y90.71608
G01 X-68.64946 Y90.63623
G01 X-68.54375 Y90.50742
G01 X-68.47583 Y90.43950
G01 X-68.34702 Y90.33379
G01 X-68.26717 Y90.28042
G01 X-68.15274 Y90.21931
G01 X-68.11578 Y90.21004
G01 X-68.02335 Y90.19163
G01 X-67.85673 Y90.16691
G01 X-67.77181 Y90.15853
G01 X-67.60516 Y90.15035
G01 X-67.52267 Y90.15035
G01 X-67.35602 Y90.15853
G01 X-67.27105 Y90.16691
G01 X-67.10445 Y90.19163
G01 X-67.01207 Y90.21004
G01 X-66.97499 Y90.21934
G01 X-66.86072 Y90.28042
G01 X-66.78086 Y90.33379
G01 X-66.65206 Y90.43950
G01 X-66.58411 Y90.50742
G01 X-66.50748 Y90.60079
G01 X-66.47842 Y90.63623
G01 X-66.42503 Y90.71608
G01 X-66.34649 Y90.86305
G01 X-66.30974 Y90.95180
G01 X-66.26135 Y91.11126
G01 X-66.24263 Y91.20547
G01 X-66.22630 Y91.37128
G01 X-66.22630 Y91.46734
G01 X-66.24263 Y91.63318
G01 X-66.26135 Y91.72739
G01 X-66.28218 Y91.79597
G01 X-66.04883 Y92.02934
G01 X-64.30764 Y92.02934
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-63.70774 Y90.21931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-63.70774 Y90.21931
G01 X-63.96893 Y90.21931
G01 X-64.06453 Y90.20989
G01 X-64.15645 Y90.18202
G01 X-64.24116 Y90.13674
G01 X-64.26362 Y90.11832
G01 X-64.31541 Y90.07580
G01 X-64.37637 Y90.00153
G01 X-64.42163 Y89.91682
G01 X-64.44952 Y89.82490
G01 X-64.45894 Y89.72932
G01 X-64.45894 Y88.02932
G01 X-64.44952 Y87.93372
G01 X-64.42163 Y87.84180
G01 X-64.37637 Y87.75709
G01 X-64.31541 Y87.68284
G01 X-64.25640 Y87.63440
G01 X-64.65808 Y87.23270
G01 X-68.07110 Y87.23270
G01 X-68.37768 Y87.53931
G01 X-68.41390 Y87.55432
G01 X-68.70062 Y87.74263
G01 X-68.88891 Y88.02935
G01 X-68.89625 Y88.04700
G01 X-69.39543 Y88.25376
G01 X-69.42144 Y88.26529
G01 X-69.48733 Y88.29646
G01 X-69.52955 Y88.31899
G01 X-69.59018 Y88.35533
G01 X-69.62439 Y88.37817
G01 X-69.68007 Y88.41947
G01 X-69.70897 Y88.44319
G01 X-69.75990 Y88.48932
G01 X-69.77298 Y88.50176
G01 X-72.76749 Y91.49627
G01 X-72.77993 Y91.50935
G01 X-72.82608 Y91.56025
G01 X-72.84978 Y91.58916
G01 X-72.89111 Y91.64486
G01 X-72.91392 Y91.67905
G01 X-72.95026 Y91.73970
G01 X-72.97279 Y91.78192
G01 X-73.00396 Y91.84781
G01 X-73.01549 Y91.87382
G01 X-73.02121 Y91.88763
G01 X-73.02715 Y91.89117
G01 X-73.16583 Y91.97430
G01 X-73.20500 Y92.00044
G01 X-73.33233 Y92.09485
G01 X-73.36370 Y92.12058
G01 X-73.48003 Y92.22601
G01 X-73.50724 Y92.25322
G01 X-73.61267 Y92.36955
G01 X-73.63840 Y92.40092
G01 X-73.73281 Y92.52825
G01 X-73.75895 Y92.56741
G01 X-73.84208 Y92.70607
G01 X-73.86990 Y92.75819
G01 X-73.94109 Y92.90874
G01 X-73.97086 Y92.98082
G01 X-74.02933 Y93.14417
G01 X-74.04953 Y93.21108
G01 X-74.04346 Y93.24163
G01 X-73.99794 Y93.39170
G01 X-73.96118 Y93.48044
G01 X-73.88725 Y93.61875
G01 X-73.83388 Y93.69863
G01 X-73.73439 Y93.81986
G01 X-73.66647 Y93.88778
G01 X-73.54523 Y93.98727
G01 X-73.46538 Y94.04064
G01 X-73.32707 Y94.11455
G01 X-73.23833 Y94.15131
G01 X-73.08824 Y94.19685
G01 X-73.00541 Y94.21331
G01 X-71.77440 Y94.21333
G01 X-71.69162 Y94.22979
G01 X-71.54156 Y94.27531
G01 X-71.45281 Y94.31206
G01 X-71.31450 Y94.38600
G01 X-71.23462 Y94.43937
G01 X-71.11339 Y94.53886
G01 X-71.04547 Y94.60678
G01 X-70.94598 Y94.72801
G01 X-70.89261 Y94.80787
G01 X-70.81870 Y94.94618
G01 X-70.78192 Y95.03492
G01 X-70.73640 Y95.18501
G01 X-70.71768 Y95.27922
G01 X-70.70229 Y95.43528
G01 X-70.70229 Y95.53134
G01 X-70.71768 Y95.68742
G01 X-70.73640 Y95.78163
G01 X-70.78192 Y95.93170
G01 X-70.81870 Y96.02044
G01 X-70.89261 Y96.15875
G01 X-70.94598 Y96.23863
G01 X-71.02426 Y96.33401
G01 X-71.04547 Y96.35986
G01 X-71.11339 Y96.42778
G01 X-71.23462 Y96.52727
G01 X-71.31450 Y96.58064
G01 X-71.45281 Y96.65455
G01 X-71.54156 Y96.69131
G01 X-71.54994 Y96.69385
G01 X-71.54994 Y96.81277
G01 X-71.54156 Y96.81531
G01 X-71.45281 Y96.85206
G01 X-71.31450 Y96.92600
G01 X-71.23462 Y96.97937
G01 X-71.11339 Y97.07886
G01 X-71.04547 Y97.14678
G01 X-70.94598 Y97.26801
G01 X-70.89261 Y97.34787
G01 X-70.81870 Y97.48618
G01 X-70.78192 Y97.57492
G01 X-70.73640 Y97.72501
G01 X-70.71768 Y97.81922
G01 X-70.70229 Y97.97528
G01 X-70.70229 Y98.07134
G01 X-70.71768 Y98.22742
G01 X-70.73640 Y98.32163
G01 X-70.78192 Y98.47170
G01 X-70.81870 Y98.56044
G01 X-70.89261 Y98.69875
G01 X-70.94598 Y98.77863
G01 X-71.04547 Y98.89986
G01 X-71.11339 Y98.96778
G01 X-71.23462 Y99.06727
G01 X-71.31450 Y99.12064
G01 X-71.45281 Y99.19455
G01 X-71.54156 Y99.23131
G01 X-71.67988 Y99.27332
G01 X-71.69215 Y99.27512
G01 X-71.78692 Y99.28450
G01 X-71.94376 Y99.29219
G01 X-71.98994 Y99.29331
G01 X-72.78994 Y99.29331
G01 X-72.83609 Y99.29219
G01 X-72.99291 Y99.28450
G01 X-73.08765 Y99.27512
G01 X-73.09982 Y99.27332
G01 X-73.58994 Y99.27332
G01 X-73.68554 Y99.28272
G01 X-73.77744 Y99.31061
G01 X-73.86218 Y99.35589
G01 X-73.93642 Y99.41683
G01 X-73.99735 Y99.49107
G01 X-74.04264 Y99.57581
G01 X-74.06715 Y99.65666
G01 X-74.31595 Y99.40789
G01 X-74.31595 Y93.47750
G01 X-74.04953 Y93.21108
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-73.45489 Y90.24057 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-73.45489 Y90.24057
G01 X-73.45494 Y89.64131
G01 X-73.45730 Y89.59330
G01 X-73.46401 Y89.52500
G01 X-73.48275 Y89.43079
G01 X-73.50266 Y89.36513
G01 X-73.53942 Y89.27639
G01 X-73.57178 Y89.21588
G01 X-73.62514 Y89.13603
G01 X-73.66865 Y89.08299
G01 X-73.70096 Y89.04736
G01 X-74.61277 Y88.13555
G01 X-74.64841 Y88.10324
G01 X-74.70144 Y88.05973
G01 X-74.78130 Y88.00636
G01 X-74.84180 Y87.97400
G01 X-74.93055 Y87.93725
G01 X-74.99621 Y87.91733
G01 X-75.09042 Y87.89859
G01 X-75.15872 Y87.89188
G01 X-75.20675 Y87.88952
G01 X-75.87116 Y87.88952
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.36669 Y91.54999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.36669 Y91.54999
G01 X-76.36375 Y91.55256
G01 X-76.34891 Y91.55401
G01 X-76.36095 Y91.56599
G01 X-76.36202 Y91.56935
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-76.34891 Y91.55401 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-76.34891 Y91.55401
G01 X-76.24325 Y91.51618
G01 X-76.16001 Y91.48182
G01 X-76.00942 Y91.41060
G01 X-75.94777 Y91.37770
G01 X-75.80911 Y91.29460
G01 X-75.76151 Y91.26282
G01 X-75.63418 Y91.16838
G01 X-75.59540 Y91.13656
G01 X-75.47904 Y91.03112
G01 X-75.44513 Y90.99721
G01 X-75.33969 Y90.88085
G01 X-75.30787 Y90.84207
G01 X-75.21340 Y90.71474
G01 X-75.18165 Y90.66714
G01 X-75.09855 Y90.52848
G01 X-75.06565 Y90.46683
G01 X-75.02684 Y90.38477
G01 X-75.02334 Y90.31339
G01 X-75.02334 Y90.23925
G01 X-75.03103 Y90.08243
G01 X-75.03858 Y90.00603
G01 X-75.04650 Y89.95264
G01 X-75.10131 Y89.86115
G01 X-75.14223 Y89.79986
G01 X-75.23670 Y89.67253
G01 X-75.27848 Y89.62157
G01 X-75.38394 Y89.50522
G01 X-75.42882 Y89.46033
G01 X-75.48742 Y89.40722
G01 X-75.56527 Y89.37936
G01 X-75.62232 Y89.36201
G01 X-75.77914 Y89.32274
G01 X-75.82585 Y89.31342
G01 X-75.98267 Y89.29015
G01 X-76.02361 Y89.28612
G01 X-76.18043 Y89.27839
G01 X-76.21942 Y89.27839
G01 X-76.37624 Y89.28612
G01 X-76.40814 Y89.28891
G01 X-76.44236 Y89.27877
G01 X-76.51096 Y89.26160
G01 X-76.54596 Y89.25462
G01 X-76.61457 Y89.24443
G01 X-76.64657 Y89.24128
G01 X-76.71521 Y89.23791
G01 X-76.73075 Y89.23753
G01 X-89.45615 Y89.23753
G01 X-89.47167 Y89.23791
G01 X-89.54027 Y89.24128
G01 X-89.57228 Y89.24443
G01 X-89.64088 Y89.25462
G01 X-89.67589 Y89.26160
G01 X-89.74449 Y89.27877
G01 X-89.78478 Y89.29102
G01 X-89.85338 Y89.31558
G01 X-89.87695 Y89.32470
G01 X-90.46804 Y89.56950
G01 X-92.83077 Y89.56953
G01 X-92.86785 Y89.56404
G01 X-92.96181 Y89.55477
G01 X-93.11865 Y89.54705
G01 X-93.21042 Y89.54705
G01 X-93.36724 Y89.55477
G01 X-93.41855 Y89.55868
G01 X-93.46150 Y89.56310
G01 X-93.46625 Y89.56359
G01 X-93.48449 Y89.56539
G01 X-93.61294 Y89.60430
G01 X-93.70166 Y89.64106
G01 X-93.83999 Y89.71499
G01 X-93.91984 Y89.76836
G01 X-94.04108 Y89.86785
G01 X-94.10900 Y89.93577
G01 X-94.13900 Y89.97232
G01 X-95.55215 Y89.97232
G01 X-95.60016 Y89.97468
G01 X-95.66846 Y89.98139
G01 X-95.76267 Y90.00013
G01 X-95.82832 Y90.02005
G01 X-95.91707 Y90.05680
G01 X-95.97757 Y90.08916
G01 X-96.05743 Y90.14253
G01 X-96.11047 Y90.18604
G01 X-96.14610 Y90.21835
G01 X-98.01780 Y92.09005
G01 X-98.60142 Y92.85817
G01 X-98.63228 Y92.89604
G01 X-98.65882 Y92.92644
G01 X-98.69121 Y92.96109
G01 X-99.50596 Y93.77584
G01 X-99.57546 Y93.83675
G01 X-99.63716 Y93.88410
G01 X-99.66070 Y93.90147
G01 X-99.77416 Y93.91801
G01 X-99.81308 Y93.92057
G01 X-99.85897 Y93.92207
G01 X-119.76506 Y93.92207
G01 X-119.85731 Y93.91600
G01 X-119.93442 Y93.90584
G01 X-119.96333 Y93.90147
G01 X-120.05520 Y93.83297
G01 X-120.08451 Y93.80729
G01 X-120.11809 Y93.77584
G01 X-123.22443 Y90.66950
G01 X-123.28532 Y90.60006
G01 X-123.33269 Y90.53831
G01 X-123.35006 Y90.51476
G01 X-123.36662 Y90.40133
G01 X-123.36916 Y90.36242
G01 X-123.37066 Y90.31647
G01 X-123.37066 Y88.87113
G01 X-123.36459 Y88.77890
G01 X-123.35446 Y88.70179
G01 X-123.29888 Y88.49823
G01 X-123.26695 Y88.42109
G01 X-123.23104 Y88.34413
G01 X-123.23094 Y88.34388
G01 X-123.23094 Y88.33687
G01 X-123.23274 Y88.33334
G01 X-123.26231 Y88.27601
G01 X-123.33650 Y88.11919
G01 X-123.36655 Y88.04682
G01 X-123.42266 Y87.89000
G01 X-123.43993 Y87.83324
G01 X-123.47920 Y87.67642
G01 X-123.48847 Y87.62993
G01 X-123.51173 Y87.47311
G01 X-123.51575 Y87.43253
G01 X-123.52344 Y87.27568
G01 X-123.52344 Y87.23692
G01 X-123.51572 Y87.08013
G01 X-123.51173 Y87.03954
G01 X-123.48847 Y86.88272
G01 X-123.47920 Y86.83623
G01 X-123.43993 Y86.67942
G01 X-123.42266 Y86.62265
G01 X-123.36655 Y86.46583
G01 X-123.33650 Y86.39346
G01 X-123.26231 Y86.23664
G01 X-123.23091 Y86.17807
G01 X-123.20239 Y86.15899
G01 X-123.06406 Y86.08506
G01 X-122.97892 Y86.04983
G01 X-122.07488 Y86.04983
G01 X-121.98982 Y86.08506
G01 X-121.85149 Y86.15899
G01 X-121.77163 Y86.21236
G01 X-121.67115 Y86.29483
G01 X-121.65040 Y86.31185
G01 X-121.58248 Y86.37977
G01 X-121.55248 Y86.41632
G01 X-120.14095 Y86.41632
G01 X-120.10506 Y86.32966
G01 X-120.08195 Y86.28643
G01 X-120.02858 Y86.20657
G01 X-119.99749 Y86.16867
G01 X-119.92957 Y86.10075
G01 X-119.89167 Y86.06966
G01 X-119.81182 Y86.01630
G01 X-119.76859 Y85.99321
G01 X-119.67984 Y85.95643
G01 X-119.63295 Y85.94221
G01 X-119.53874 Y85.92349
G01 X-119.49945 Y85.91962
G01 X-119.48964 Y85.92158
G01 X-119.44194 Y85.93230
G01 X-119.38383 Y85.94685
G01 X-119.29543 Y85.96448
G01 X-119.12881 Y85.98920
G01 X-119.04786 Y85.99717
G01 X-118.88124 Y86.00535
G01 X-118.84194 Y86.00632
G01 X-118.59193 Y86.00632
G01 X-118.55261 Y86.00535
G01 X-118.38599 Y85.99717
G01 X-118.30504 Y85.98920
G01 X-118.13841 Y85.96448
G01 X-118.05002 Y85.94685
G01 X-117.99193 Y85.93230
G01 X-117.94421 Y85.92158
G01 X-117.93433 Y85.91962
G01 X-117.89653 Y85.92333
G01 X-117.89089 Y85.92897
G01 X-117.81888 Y86.00146
G01 X-117.77913 Y86.03923
G01 X-117.71870 Y86.09326
G01 X-117.71223 Y86.09900
G01 X-117.68086 Y86.12643
G01 X-117.65340 Y86.15168
G01 X-117.62897 Y86.17535
G01 X-117.59254 Y86.20822
G01 X-117.58500 Y86.21457
G01 X-117.56636 Y86.23083
G01 X-117.54393 Y86.25691
G01 X-117.51289 Y86.29483
G01 X-117.48944 Y86.32516
G01 X-117.47446 Y86.35209
G01 X-117.45157 Y86.39542
G01 X-117.43308 Y86.43309
G01 X-117.42500 Y86.45874
G01 X-117.41114 Y86.50573
G01 X-117.39912 Y86.55234
G01 X-117.39686 Y86.57312
G01 X-117.39277 Y86.61678
G01 X-117.39252 Y86.62191
G01 X-117.39168 Y86.65630
G01 X-117.39168 Y87.85632
G01 X-117.39252 Y87.89074
G01 X-117.39277 Y87.89587
G01 X-117.39686 Y87.93953
G01 X-117.39912 Y87.96029
G01 X-117.41114 Y88.00692
G01 X-117.42500 Y88.05391
G01 X-117.43308 Y88.07956
G01 X-117.45157 Y88.11723
G01 X-117.47446 Y88.16057
G01 X-117.48944 Y88.18749
G01 X-117.51289 Y88.21782
G01 X-117.54393 Y88.25574
G01 X-117.56638 Y88.28185
G01 X-117.59259 Y88.30438
G01 X-117.63052 Y88.33542
G01 X-117.66077 Y88.35879
G01 X-117.68754 Y88.37370
G01 X-117.73090 Y88.39661
G01 X-117.76869 Y88.41517
G01 X-117.79435 Y88.42325
G01 X-117.84134 Y88.43712
G01 X-117.88794 Y88.44913
G01 X-117.90872 Y88.45140
G01 X-117.95236 Y88.45548
G01 X-117.95752 Y88.45574
G01 X-117.99193 Y88.45658
G01 X-119.44192 Y88.45658
G01 X-119.47633 Y88.45574
G01 X-119.48149 Y88.45548
G01 X-119.52513 Y88.45140
G01 X-119.54590 Y88.44913
G01 X-119.57550 Y88.44190
G01 X-119.59251 Y88.43712
G01 X-119.63950 Y88.42325
G01 X-119.66513 Y88.41517
G01 X-119.70295 Y88.39661
G01 X-119.74631 Y88.37370
G01 X-119.77308 Y88.35879
G01 X-119.80333 Y88.33542
G01 X-119.84126 Y88.30438
G01 X-119.86747 Y88.28185
G01 X-119.88992 Y88.25574
G01 X-119.92096 Y88.21782
G01 X-119.95596 Y88.17118
G01 X-119.96191 Y88.16191
G01 X-119.98995 Y88.12132
G01 X-120.00882 Y88.09587
G01 X-120.03026 Y88.06232
G01 X-120.03125 Y88.06069
G01 X-120.05896 Y88.01792
G01 X-120.07036 Y88.00151
G01 X-120.19988 Y87.97281
G01 X-120.27699 Y87.96265
G01 X-120.36925 Y87.95658
G01 X-121.38916 Y87.95658
G01 X-121.44224 Y87.95858
G01 X-121.48723 Y87.96201
G01 X-121.60691 Y87.98119
G01 X-121.63132 Y88.00189
G01 X-121.68461 Y88.04903
G01 X-121.68982 Y88.05361
G01 X-121.73734 Y88.09486
G01 X-121.74435 Y88.10100
G01 X-121.85956 Y88.19310
G01 X-121.89675 Y88.22086
G01 X-121.91656 Y88.23194
G01 X-122.05466 Y88.30621
G01 X-122.06421 Y88.31124
G01 X-122.11887 Y88.33146
G01 X-122.24440 Y88.37202
G01 X-122.26873 Y88.37771
G01 X-122.33642 Y88.39008
G01 X-122.43190 Y88.40275
G01 X-122.49248 Y88.40573
G01 X-122.56139 Y88.40573
G01 X-122.62195 Y88.40275
G01 X-122.71742 Y88.39008
G01 X-122.78512 Y88.37771
G01 X-122.78895 Y88.37682
G01 X-122.81760 Y88.37072
G01 X-122.84188 Y88.36610
G01 X-122.94183 Y88.35406
G01 X-122.97043 Y88.35256
G01 X-123.02164 Y88.34825
G01 X-123.05240 Y88.34472
G01 X-123.19456 Y88.33913
G01 X-123.22278 Y88.33999
G01 X-123.22591 Y88.34009
G01 X-123.22697 Y88.34073
G01 X-123.23104 Y88.34413
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-123.22278 Y88.33999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-123.22278 Y88.33999
G01 X-123.23274 Y88.33334
G01 X-123.23277 Y88.33334
G01 X-123.26231 Y88.27601
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-119.49945 Y85.91962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-119.49945 Y85.91962
G01 X-119.54517 Y85.89522
G01 X-119.62503 Y85.84182
G01 X-119.75383 Y85.73614
G01 X-119.82175 Y85.66822
G01 X-119.86881 Y85.61086
G01 X-119.88075 Y85.59631
G01 X-121.48144 Y85.59631
G01 X-121.48298 Y85.59862
G01 X-121.58248 Y85.71985
G01 X-121.65040 Y85.78777
G01 X-121.77163 Y85.88727
G01 X-121.85149 Y85.94063
G01 X-121.98982 Y86.01457
G01 X-122.07488 Y86.04983
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-123.23091 Y86.17807 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-123.23091 Y86.17807
G01 X-123.23094 Y85.92156
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-122.97892 Y86.04983 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-122.97892 Y86.04983
G01 X-123.06406 Y86.01457
G01 X-123.20239 Y85.94063
G01 X-123.23094 Y85.92156
G01 X-123.26231 Y85.86301
G01 X-123.33650 Y85.70619
G01 X-123.36655 Y85.63382
G01 X-123.42266 Y85.47700
G01 X-123.43993 Y85.42024
G01 X-123.47920 Y85.26342
G01 X-123.48847 Y85.21693
G01 X-123.51173 Y85.06011
G01 X-123.51575 Y85.01953
G01 X-123.52344 Y84.86268
G01 X-123.52344 Y84.82392
G01 X-123.51572 Y84.66713
G01 X-123.51173 Y84.62654
G01 X-123.48847 Y84.46972
G01 X-123.47920 Y84.42323
G01 X-123.43993 Y84.26642
G01 X-123.42266 Y84.20965
G01 X-123.36655 Y84.05283
G01 X-123.33650 Y83.98046
G01 X-123.26231 Y83.82364
G01 X-123.23091 Y83.76507
G01 X-123.20239 Y83.74599
G01 X-123.06406 Y83.67206
G01 X-122.97534 Y83.63530
G01 X-122.82525 Y83.58978
G01 X-122.74237 Y83.57333
G01 X-122.31135 Y83.57333
G01 X-122.22863 Y83.55684
G01 X-122.07854 Y83.51132
G01 X-121.98982 Y83.47457
G01 X-121.85149 Y83.40063
G01 X-121.77163 Y83.34727
G01 X-121.65040 Y83.24777
G01 X-121.58248 Y83.17985
G01 X-121.51392 Y83.09631
G01 X-119.88075 Y83.09631
G01 X-119.82175 Y83.16820
G01 X-119.75383 Y83.23614
G01 X-119.62503 Y83.34183
G01 X-119.54517 Y83.39520
G01 X-119.39820 Y83.47376
G01 X-119.31956 Y83.50632
G01 X-118.11426 Y83.50632
G01 X-118.07052 Y83.48818
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-110.41613 Y90.84641 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-110.41613 Y90.84641
G01 X-110.41816 Y90.81238
G01 X-110.42052 Y90.80338
G01 X-111.91031 Y86.33398
G01 X-111.91526 Y86.32186
G01 X-111.92857 Y86.29880
G01 X-111.94147 Y86.28589
G01 X-111.95740 Y86.27670
G01 X-111.97508 Y86.27197
G01 X-111.99337 Y86.27197
G01 X-112.01107 Y86.27670
G01 X-112.02695 Y86.28587
G01 X-112.03990 Y86.29882
G01 X-112.05318 Y86.32186
G01 X-112.05646 Y86.32991
G01 X-113.54792 Y90.80338
G01 X-113.55026 Y90.81233
G01 X-113.55232 Y90.84636
G01 X-113.54874 Y90.86384
G01 X-113.54076 Y90.87979
G01 X-113.52895 Y90.89312
G01 X-113.51409 Y90.90293
G01 X-113.49715 Y90.90857
G01 X-113.47937 Y90.90963
G01 X-113.46194 Y90.90608
G01 X-113.44599 Y90.89810
G01 X-113.43266 Y90.88626
G01 X-113.41386 Y90.85782
G01 X-113.41036 Y90.84923
G01 X-112.44907 Y87.96537
G01 X-112.41092 Y87.87944
G01 X-112.35707 Y87.80237
G01 X-112.28948 Y87.73702
G01 X-112.21066 Y87.68579
G01 X-112.12349 Y87.65053
G01 X-112.03121 Y87.63258
G01 X-111.93721 Y87.63258
G01 X-111.84493 Y87.65053
G01 X-111.75776 Y87.68579
G01 X-111.67894 Y87.73702
G01 X-111.61135 Y87.80237
G01 X-111.55750 Y87.87944
G01 X-111.51935 Y87.96537
G01 X-110.55809 Y90.84923
G01 X-110.55458 Y90.85782
G01 X-110.53579 Y90.88626
G01 X-110.52245 Y90.89810
G01 X-110.50650 Y90.90608
G01 X-110.48908 Y90.90963
G01 X-110.47130 Y90.90857
G01 X-110.45433 Y90.90293
G01 X-110.43950 Y90.89312
G01 X-110.42766 Y90.87979
G01 X-110.41968 Y90.86381
G01 X-110.41613 Y90.84641
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-106.55939 Y86.33263 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-106.55939 Y86.33263
G01 X-106.56399 Y86.31543
G01 X-106.57291 Y86.29999
G01 X-106.58553 Y86.28737
G01 X-106.60097 Y86.27845
G01 X-106.63381 Y86.26966
G01 X-106.64309 Y86.26905
G01 X-109.18250 Y86.26905
G01 X-109.19177 Y86.26966
G01 X-109.22461 Y86.27845
G01 X-109.24006 Y86.28737
G01 X-109.25268 Y86.29999
G01 X-109.26160 Y86.31543
G01 X-109.26619 Y86.33263
G01 X-109.26619 Y86.35046
G01 X-109.26160 Y86.36766
G01 X-109.25268 Y86.38310
G01 X-109.24008 Y86.39570
G01 X-109.22461 Y86.40461
G01 X-109.19172 Y86.41343
G01 X-109.18250 Y86.41404
G01 X-108.47531 Y86.41404
G01 X-108.37971 Y86.42346
G01 X-108.28779 Y86.45135
G01 X-108.20308 Y86.49661
G01 X-108.12881 Y86.55755
G01 X-108.06787 Y86.63182
G01 X-108.02261 Y86.71652
G01 X-107.99472 Y86.80845
G01 X-107.98530 Y86.90403
G01 X-107.98530 Y89.29219
G01 X-107.99421 Y89.38518
G01 X-108.02058 Y89.47479
G01 X-108.06350 Y89.55774
G01 X-108.12137 Y89.63107
G01 X-108.19210 Y89.69206
G01 X-108.27313 Y89.73854
G01 X-108.36150 Y89.76879
G01 X-108.45400 Y89.78175
G01 X-108.54727 Y89.77689
G01 X-108.63795 Y89.75442
G01 X-108.72268 Y89.71517
G01 X-108.75189 Y89.69808
G01 X-109.15174 Y89.49815
G01 X-109.16028 Y89.49455
G01 X-109.19368 Y89.48772
G01 X-109.21143 Y89.48878
G01 X-109.22835 Y89.49442
G01 X-109.24326 Y89.50428
G01 X-109.25507 Y89.51759
G01 X-109.26304 Y89.53354
G01 X-109.26660 Y89.55096
G01 X-109.26553 Y89.56874
G01 X-109.25990 Y89.58571
G01 X-109.25007 Y89.60057
G01 X-109.22456 Y89.62317
G01 X-109.21659 Y89.62785
G01 X-108.88403 Y89.79414
G01 X-108.81664 Y89.83488
G01 X-108.75664 Y89.88591
G01 X-108.43201 Y90.21055
G01 X-108.37079 Y90.28525
G01 X-108.15454 Y90.60961
G01 X-107.98202 Y90.86838
G01 X-107.97636 Y90.87577
G01 X-107.97100 Y90.88050
G01 X-107.95286 Y90.89749
G01 X-107.93709 Y90.90592
G01 X-107.91959 Y90.91001
G01 X-107.90160 Y90.90945
G01 X-107.88448 Y90.90427
G01 X-107.86912 Y90.89472
G01 X-107.85690 Y90.88169
G01 X-107.84839 Y90.86579
G01 X-107.84278 Y90.84171
G01 X-107.84090 Y90.83475
G01 X-107.84029 Y90.82541
G01 X-107.84029 Y86.90403
G01 X-107.83087 Y86.80845
G01 X-107.80298 Y86.71652
G01 X-107.75771 Y86.63182
G01 X-107.69678 Y86.55755
G01 X-107.62251 Y86.49661
G01 X-107.53780 Y86.45135
G01 X-107.44588 Y86.42346
G01 X-107.35030 Y86.41404
G01 X-106.64309 Y86.41404
G01 X-106.63387 Y86.41343
G01 X-106.60097 Y86.40461
G01 X-106.58550 Y86.39570
G01 X-106.57291 Y86.38310
G01 X-106.56399 Y86.36766
G01 X-106.55939 Y86.35046
G01 X-106.55939 Y86.33263
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-104.41655 Y86.54685 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-104.41655 Y86.54685
G01 X-104.42114 Y86.52973
G01 X-104.43819 Y86.50019
G01 X-104.44431 Y86.49321
G01 X-104.63590 Y86.30162
G01 X-104.64289 Y86.29549
G01 X-104.67240 Y86.27845
G01 X-104.68957 Y86.27385
G01 X-104.70743 Y86.27385
G01 X-104.72460 Y86.27845
G01 X-104.75419 Y86.29554
G01 X-104.76112 Y86.30162
G01 X-104.95272 Y86.49321
G01 X-104.95884 Y86.50019
G01 X-104.97588 Y86.52971
G01 X-104.97911 Y86.54177
G01 X-104.98048 Y86.54688
G01 X-104.98048 Y86.56476
G01 X-104.97588 Y86.58196
G01 X-104.95884 Y86.61144
G01 X-104.95269 Y86.61846
G01 X-104.76112 Y86.81005
G01 X-104.75416 Y86.81614
G01 X-104.72467 Y86.83316
G01 X-104.70743 Y86.83778
G01 X-104.68960 Y86.83778
G01 X-104.67235 Y86.83316
G01 X-104.64286 Y86.81614
G01 X-104.63590 Y86.81005
G01 X-104.44433 Y86.61848
G01 X-104.43821 Y86.61150
G01 X-104.42117 Y86.58198
G01 X-104.41655 Y86.56473
G01 X-104.41655 Y86.54685
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.27101 Y88.12506 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.27101 Y88.12506
G01 X-100.27101 Y89.05800
G01 X-100.28564 Y89.17684
G01 X-100.46814 Y89.90689
G01 X-100.50525 Y90.00717
G01 X-100.65110 Y90.29889
G01 X-100.69184 Y90.36628
G01 X-100.74287 Y90.42627
G01 X-100.82806 Y90.51146
G01 X-100.88805 Y90.56249
G01 X-100.95544 Y90.60326
G01 X-101.18361 Y90.71733
G01 X-101.29016 Y90.75594
G01 X-101.40274 Y90.76904
G01 X-101.56573 Y90.76904
G01 X-101.67827 Y90.75594
G01 X-101.78483 Y90.71733
G01 X-102.01300 Y90.60326
G01 X-102.08038 Y90.56249
G01 X-102.14038 Y90.51146
G01 X-102.22557 Y90.42627
G01 X-102.27660 Y90.36628
G01 X-102.31734 Y90.29889
G01 X-102.46319 Y90.00717
G01 X-102.50029 Y89.90692
G01 X-102.68282 Y89.17687
G01 X-102.69745 Y89.05800
G01 X-102.69745 Y88.12506
G01 X-102.68282 Y88.00621
G01 X-102.50029 Y87.27616
G01 X-102.46319 Y87.17591
G01 X-102.31734 Y86.88419
G01 X-102.27660 Y86.81680
G01 X-102.22557 Y86.75681
G01 X-102.14038 Y86.67162
G01 X-102.08038 Y86.62059
G01 X-102.01300 Y86.57982
G01 X-101.78483 Y86.46575
G01 X-101.67827 Y86.42714
G01 X-101.56573 Y86.41404
G01 X-101.40274 Y86.41404
G01 X-101.29016 Y86.42714
G01 X-101.18361 Y86.46575
G01 X-100.95544 Y86.57982
G01 X-100.88805 Y86.62059
G01 X-100.82806 Y86.67162
G01 X-100.74287 Y86.75681
G01 X-100.69184 Y86.81680
G01 X-100.65110 Y86.88419
G01 X-100.50525 Y87.17591
G01 X-100.46814 Y87.27619
G01 X-100.28564 Y88.00623
G01 X-100.27101 Y88.12506
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-100.12600 Y88.07194 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-100.12600 Y88.07194
G01 X-100.12600 Y89.11113
G01 X-100.12763 Y89.13593
G01 X-100.13207 Y89.16039
G01 X-100.33858 Y89.98642
G01 X-100.34577 Y90.00885
G01 X-100.34584 Y90.00915
G01 X-100.34602 Y90.00951
G01 X-100.35514 Y90.03120
G01 X-100.55506 Y90.43105
G01 X-100.56893 Y90.45477
G01 X-100.58719 Y90.47560
G01 X-100.77876 Y90.66719
G01 X-100.79949 Y90.68535
G01 X-100.82328 Y90.69927
G01 X-101.22308 Y90.89917
G01 X-101.23179 Y90.90283
G01 X-101.23990 Y90.90448
G01 X-101.26857 Y90.91126
G01 X-101.27670 Y90.91342
G01 X-101.28592 Y90.91403
G01 X-101.68252 Y90.91403
G01 X-101.69174 Y90.91342
G01 X-101.69981 Y90.91126
G01 X-101.72857 Y90.90448
G01 X-101.73669 Y90.90283
G01 X-101.74528 Y90.89919
G01 X-102.14518 Y90.69927
G01 X-102.16893 Y90.68538
G01 X-102.18968 Y90.66719
G01 X-102.38130 Y90.47557
G01 X-102.39946 Y90.45485
G01 X-102.41340 Y90.43102
G01 X-102.61332 Y90.03117
G01 X-102.62244 Y90.00951
G01 X-102.62257 Y90.00925
G01 X-102.62267 Y90.00885
G01 X-102.62986 Y89.98642
G01 X-102.83639 Y89.16039
G01 X-102.84081 Y89.13598
G01 X-102.84243 Y89.11124
G01 X-102.84243 Y88.07184
G01 X-102.84081 Y88.04710
G01 X-102.83639 Y88.02269
G01 X-102.62986 Y87.19666
G01 X-102.62267 Y87.17423
G01 X-102.62257 Y87.17383
G01 X-102.62244 Y87.17357
G01 X-102.61332 Y87.15191
G01 X-102.46156 Y86.84838
G01 X-102.41340 Y86.75203
G01 X-102.39946 Y86.72823
G01 X-102.38130 Y86.70751
G01 X-102.18968 Y86.51589
G01 X-102.16893 Y86.49770
G01 X-102.14518 Y86.48381
G01 X-101.74528 Y86.28389
G01 X-101.73669 Y86.28025
G01 X-101.72857 Y86.27860
G01 X-101.69981 Y86.27182
G01 X-101.69174 Y86.26966
G01 X-101.68252 Y86.26905
G01 X-101.28592 Y86.26905
G01 X-101.27673 Y86.26964
G01 X-101.26865 Y86.27182
G01 X-101.23990 Y86.27860
G01 X-101.23177 Y86.28025
G01 X-101.22308 Y86.28391
G01 X-100.82328 Y86.48381
G01 X-100.79949 Y86.49773
G01 X-100.77876 Y86.51589
G01 X-100.58719 Y86.70748
G01 X-100.56893 Y86.72831
G01 X-100.55506 Y86.75203
G01 X-100.35509 Y87.15196
G01 X-100.34584 Y87.17393
G01 X-100.34577 Y87.17423
G01 X-100.33858 Y87.19666
G01 X-100.13207 Y88.02269
G01 X-100.12763 Y88.04715
G01 X-100.12600 Y88.07194
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-95.93493 Y85.02516 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-95.93493 Y85.02516
G01 X-96.10493 Y84.85519
G01 X-96.10493 Y81.62675
G01 X-96.06840 Y81.59677
G01 X-96.01994 Y81.54831
G01 X-96.01992 Y81.01486
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-94.12972 Y79.97940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-94.12972 Y79.97940
G01 X-94.12972 Y81.50356
G01 X-94.10900 Y81.52885
G01 X-94.10501 Y81.53284
G01 X-94.09503 Y81.53589
G01 X-94.00918 Y81.55829
G01 X-93.84827 Y81.60909
G01 X-93.80534 Y81.62758
G01 X-93.78020 Y81.63785
G01 X-93.73674 Y81.65469
G01 X-93.65685 Y81.69141
G01 X-93.63679 Y81.70221
G01 X-93.62729 Y81.70724
G01 X-93.57258 Y81.72746
G01 X-93.44705 Y81.76802
G01 X-93.42272 Y81.77371
G01 X-93.35502 Y81.78608
G01 X-93.25955 Y81.79875
G01 X-93.19899 Y81.80173
G01 X-93.13008 Y81.80173
G01 X-93.06950 Y81.79875
G01 X-92.97402 Y81.78608
G01 X-92.90633 Y81.77371
G01 X-92.88200 Y81.76802
G01 X-92.75647 Y81.72746
G01 X-92.70181 Y81.70724
G01 X-92.69226 Y81.70221
G01 X-92.55416 Y81.62794
G01 X-92.53435 Y81.61686
G01 X-92.49716 Y81.58910
G01 X-92.38482 Y81.49929
G01 X-92.37535 Y81.49035
G01 X-92.32759 Y81.44061
G01 X-92.25663 Y81.35898
G01 X-92.22777 Y81.31963
G01 X-92.18982 Y81.26220
G01 X-92.15287 Y81.19980
G01 X-92.11599 Y81.12385
G01 X-92.08899 Y81.06053
G01 X-92.07621 Y81.02596
G01 X-92.04403 Y80.91026
G01 X-92.02884 Y80.84300
G01 X-92.02864 Y80.84186
G01 X-92.01456 Y80.68682
G01 X-92.01230 Y80.65233
G01 X-92.01459 Y80.61781
G01 X-92.02864 Y80.46279
G01 X-92.02884 Y80.46162
G01 X-92.04403 Y80.39439
G01 X-92.07621 Y80.27869
G01 X-92.08899 Y80.24412
G01 X-92.11599 Y80.18080
G01 X-92.15287 Y80.10485
G01 X-92.18982 Y80.04245
G01 X-92.22777 Y79.98502
G01 X-92.24934 Y79.95560
G01 X-92.36976 Y79.89866
G01 X-92.42554 Y79.87547
G01 X-92.58238 Y79.81938
G01 X-92.62368 Y79.80681
G01 X-92.78050 Y79.76752
G01 X-92.81225 Y79.76119
G01 X-92.96910 Y79.73795
G01 X-92.99541 Y79.73533
G01 X-93.15223 Y79.72764
G01 X-93.17684 Y79.72764
G01 X-93.33366 Y79.73533
G01 X-93.35995 Y79.73795
G01 X-93.51680 Y79.76119
G01 X-93.54855 Y79.76752
G01 X-93.70537 Y79.80681
G01 X-93.74667 Y79.81938
G01 X-93.90351 Y79.87547
G01 X-93.95929 Y79.89866
G01 X-94.11611 Y79.97282
G01 X-94.12972 Y79.97940
G01 X-94.14334 Y79.97282
G01 X-94.30016 Y79.89866
G01 X-94.35594 Y79.87547
G01 X-94.51278 Y79.81938
G01 X-94.55408 Y79.80681
G01 X-94.71090 Y79.76752
G01 X-94.74265 Y79.76119
G01 X-94.89950 Y79.73795
G01 X-94.92581 Y79.73533
G01 X-95.08263 Y79.72764
G01 X-95.10724 Y79.72764
G01 X-95.26406 Y79.73533
G01 X-95.29035 Y79.73795
G01 X-95.44720 Y79.76119
G01 X-95.47895 Y79.76752
G01 X-95.63577 Y79.80681
G01 X-95.67707 Y79.81938
G01 X-95.83391 Y79.87547
G01 X-95.88969 Y79.89866
G01 X-96.01992 Y79.96028
G01 X-96.01994 Y79.99467
G01 X-96.01994 Y80.24681
G01 X-96.01992 Y80.28979
G01 X-96.01992 Y81.01486
G01 X-96.01994 Y81.05784
G01 X-96.01994 Y81.54831
G01 X-95.97148 Y81.59677
G01 X-95.93493 Y81.62677
G01 X-95.93493 Y85.02516
G01 X-95.79985 Y85.35130
G01 X-95.78499 Y85.38483
G01 X-95.75383 Y85.45072
G01 X-95.72416 Y85.50634
G01 X-95.68779 Y85.56702
G01 X-95.65713 Y85.61292
G01 X-95.61583 Y85.66862
G01 X-95.58354 Y85.70799
G01 X-95.53742 Y85.75889
G01 X-95.52037 Y85.77678
G01 X-93.16930 Y88.12785
G01 X-93.15355 Y88.13435
G01 X-93.12998 Y88.14347
G01 X-93.06138 Y88.16803
G01 X-93.02109 Y88.18028
G01 X-92.95249 Y88.19745
G01 X-92.91748 Y88.20443
G01 X-92.84888 Y88.21462
G01 X-92.81687 Y88.21777
G01 X-92.74827 Y88.22114
G01 X-92.73275 Y88.22153
G01 X-76.88315 Y88.22153
G01 X-76.86761 Y88.22114
G01 X-76.79897 Y88.21777
G01 X-76.76697 Y88.21462
G01 X-76.69836 Y88.20443
G01 X-76.66336 Y88.19745
G01 X-76.59476 Y88.18028
G01 X-76.55447 Y88.16803
G01 X-76.48587 Y88.14347
G01 X-76.46230 Y88.13435
G01 X-75.87116 Y87.88952
G01 X-74.14760 Y86.16590
G01 X-69.38017 Y86.16590
G01 X-68.86094 Y85.95084
G01 X-68.83450 Y85.94063
G01 X-68.76589 Y85.91607
G01 X-68.72015 Y85.90218
G01 X-68.65154 Y85.88498
G01 X-68.61136 Y85.87698
G01 X-68.54276 Y85.86679
G01 X-68.50572 Y85.86314
G01 X-68.43712 Y85.85976
G01 X-68.41906 Y85.85933
G01 X-64.31015 Y85.85933
G01 X-64.29212 Y85.85976
G01 X-64.22349 Y85.86314
G01 X-64.18643 Y85.86679
G01 X-64.11782 Y85.87698
G01 X-64.10728 Y85.87868
G01 X-64.08312 Y85.89527
G01 X-64.02742 Y85.93657
G01 X-63.99915 Y85.95976
G01 X-63.94825 Y86.00591
G01 X-63.93547 Y86.01808
G01 X-62.74427 Y87.20928
G01 X-62.73210 Y87.22206
G01 X-62.68595 Y87.27296
G01 X-62.66276 Y87.30123
G01 X-62.62146 Y87.35693
G01 X-62.59913 Y87.39041
G01 X-62.56276 Y87.45107
G01 X-62.54066 Y87.49247
G01 X-62.50952 Y87.55836
G01 X-62.49819 Y87.58391
G01 X-62.44701 Y87.70743
G01 X-62.26890 Y87.78122
G01 X-62.02080 Y88.02932
G01 X-61.90243 Y88.31510
G01 X-61.90243 Y89.72932
G01 X-61.95791 Y90.01454
G01 X-62.02593 Y90.13110
G01 X-62.02593 Y90.34047
G01 X-62.16601 Y90.48053
G01 X-62.20706 Y90.43950
G01 X-62.33586 Y90.33379
G01 X-62.41572 Y90.28042
G01 X-62.52999 Y90.21934
G01 X-62.56707 Y90.21004
G01 X-62.65945 Y90.19163
G01 X-62.82608 Y90.16691
G01 X-62.91102 Y90.15853
G01 X-63.07767 Y90.15035
G01 X-63.16019 Y90.15035
G01 X-63.32681 Y90.15853
G01 X-63.41173 Y90.16691
G01 X-63.57838 Y90.19163
G01 X-63.67078 Y90.21004
G01 X-63.70774 Y90.21931
G01 X-63.82217 Y90.28042
G01 X-63.90202 Y90.33379
G01 X-64.03083 Y90.43950
G01 X-64.09875 Y90.50742
G01 X-64.20446 Y90.63623
G01 X-64.25783 Y90.71608
G01 X-64.33639 Y90.86305
G01 X-64.37314 Y90.95180
G01 X-64.42150 Y91.11126
G01 X-64.44025 Y91.20547
G01 X-64.45658 Y91.37128
G01 X-64.45658 Y91.46734
G01 X-64.44025 Y91.63318
G01 X-64.43806 Y91.64407
G01 X-64.42150 Y91.72739
G01 X-64.37314 Y91.88682
G01 X-64.33639 Y91.97557
G01 X-64.30764 Y92.02934
G01 X-64.20200 Y92.09266
G01 X-64.12260 Y92.13523
G01 X-63.95595 Y92.21405
G01 X-63.89852 Y92.23790
G01 X-63.73189 Y92.29754
G01 X-63.68965 Y92.31037
G01 X-63.52303 Y92.35210
G01 X-63.49090 Y92.35853
G01 X-63.32425 Y92.38324
G01 X-63.29783 Y92.38586
G01 X-63.13121 Y92.39403
G01 X-63.10665 Y92.39403
G01 X-62.94000 Y92.38586
G01 X-62.91356 Y92.38324
G01 X-62.74696 Y92.35853
G01 X-62.71483 Y92.35210
G01 X-62.54820 Y92.31037
G01 X-62.50596 Y92.29754
G01 X-62.33934 Y92.23790
G01 X-62.28191 Y92.21405
G01 X-62.13451 Y92.14433
G01 X-61.91686 Y92.14433
G01 X-61.87998 Y92.14344
G01 X-61.81135 Y92.14006
G01 X-61.73632 Y92.13264
G01 X-61.66771 Y92.12248
G01 X-61.58836 Y92.10666
G01 X-61.51978 Y92.08949
G01 X-61.43286 Y92.06305
G01 X-61.36426 Y92.03848
G01 X-61.34053 Y92.02934
G01 X-58.46193 Y92.02934
G01 X-58.46193 Y91.74031
G01 X-58.45253 Y91.64471
G01 X-58.42489 Y91.55362
G01 X-58.32289 Y91.47712
G01 X-57.97194 Y91.38936
G01 X-56.27194 Y91.38936
G01 X-55.89739 Y91.48929
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.80650 Y94.21247 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.80650 Y94.21247
G01 X-46.71768 Y94.26652
G01 X-46.70135 Y94.30485
G01 X-46.68341 Y94.36335
G01 X-46.66380 Y94.46385
G01 X-46.66551 Y94.56627
G01 X-46.68844 Y94.66606
G01 X-46.70831 Y94.72393
G01 X-46.71722 Y94.74325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-46.01783 Y94.98108 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-46.01783 Y94.98108
G01 X-46.02058 Y94.97747
G01 X-46.08862 Y94.93200
G01 X-46.22692 Y94.85806
G01 X-46.31567 Y94.82131
G01 X-46.46574 Y94.77579
G01 X-46.55994 Y94.75705
G01 X-46.71486 Y94.74178
G01 X-46.71613 Y94.74259
G01 X-46.71722 Y94.74325
G01 X-46.71725 Y94.74328
G01 X-46.80650 Y94.79804
G01 X-46.95042 Y94.86937
G01 X-46.95682 Y94.87180
G01 X-47.00554 Y94.89228
G01 X-47.02438 Y94.90101
G01 X-47.10429 Y94.93228
G01 X-47.17216 Y94.95423
G01 X-47.22677 Y94.97442
G01 X-47.23630 Y94.97945
G01 X-47.37440 Y95.05372
G01 X-47.39423 Y95.06479
G01 X-47.43139 Y95.09253
G01 X-47.54374 Y95.18232
G01 X-47.55324 Y95.19131
G01 X-47.60096 Y95.24104
G01 X-47.67193 Y95.32268
G01 X-47.70079 Y95.36200
G01 X-47.73873 Y95.41945
G01 X-47.77569 Y95.48184
G01 X-47.81257 Y95.55781
G01 X-47.83957 Y95.62108
G01 X-47.85235 Y95.65570
G01 X-47.88453 Y95.77135
G01 X-47.89974 Y95.83868
G01 X-47.89992 Y95.83977
G01 X-47.91399 Y95.99487
G01 X-47.91625 Y96.02933
G01 X-47.91399 Y96.06378
G01 X-47.89992 Y96.21887
G01 X-47.89974 Y96.21996
G01 X-47.88453 Y96.28732
G01 X-47.85235 Y96.40294
G01 X-47.83957 Y96.43756
G01 X-47.81257 Y96.50083
G01 X-47.77569 Y96.57680
G01 X-47.73873 Y96.63919
G01 X-47.70079 Y96.69664
G01 X-47.67196 Y96.73594
G01 X-47.66032 Y96.74932
G01 X-47.60543 Y96.82125
G01 X-47.59365 Y96.83896
G01 X-47.56390 Y96.88036
G01 X-47.55692 Y96.88943
G01 X-47.47518 Y97.01945
G01 X-47.45966 Y97.04988
G01 X-47.49949 Y97.12387
G01 X-47.53294 Y97.17955
G01 X-47.54242 Y97.19489
G01 X-47.58186 Y97.25732
G01 X-47.61097 Y97.29992
G01 X-47.61928 Y97.31122
G01 X-47.63441 Y97.33101
G01 X-47.70015 Y97.41384
G01 X-47.72093 Y97.44137
G01 X-47.73843 Y97.47109
G01 X-47.80747 Y97.59532
G01 X-47.83055 Y97.64411
G01 X-47.85689 Y97.70769
G01 X-47.87508 Y97.75859
G01 X-47.91409 Y97.89522
G01 X-47.92276 Y97.92862
G01 X-47.92756 Y97.96281
G01 X-47.94381 Y98.10408
G01 X-47.94645 Y98.15795
G01 X-47.94729 Y98.19232
G01 X-47.94729 Y99.69234
G01 X-47.94645 Y99.72671
G01 X-47.94381 Y99.78058
G01 X-47.92756 Y99.92186
G01 X-47.92276 Y99.95602
G01 X-47.91409 Y99.98947
G01 X-47.89294 Y100.06359
G01 X-47.82989 Y100.16877
G01 X-47.79477 Y100.22137
G01 X-47.67671 Y100.38056
G01 X-47.64188 Y100.42302
G01 X-47.51008 Y100.56844
G01 X-47.47315 Y100.60537
G01 X-47.32774 Y100.73717
G01 X-47.28527 Y100.77200
G01 X-47.12608 Y100.89005
G01 X-47.08760 Y100.91647
G01 X-47.06975 Y100.93506
G01 X-46.13358 Y101.87123
G01 X-46.08260 Y101.99435
G01 X-46.07140 Y102.01957
G01 X-46.04915 Y102.06661
G01 X-46.02662 Y102.10885
G01 X-46.00064 Y102.15218
G01 X-45.97745 Y102.18690
G01 X-45.94796 Y102.22670
G01 X-45.92334 Y102.25670
G01 X-45.89040 Y102.29305
G01 X-45.88151 Y102.30252
G01 X-45.85746 Y102.31202
G01 X-45.80843 Y102.32957
G01 X-45.77717 Y102.33907
G01 X-45.72817 Y102.35137
G01 X-45.70061 Y102.35685
G01 X-45.65159 Y102.36412
G01 X-45.62632 Y102.36661
G01 X-45.57732 Y102.36902
G01 X-45.56505 Y102.36933
G01 X-45.06503 Y102.36933
G01 X-45.05276 Y102.36902
G01 X-45.00376 Y102.36661
G01 X-44.97846 Y102.36412
G01 X-44.92947 Y102.35685
G01 X-44.90198 Y102.35137
G01 X-44.85296 Y102.33907
G01 X-44.82164 Y102.32957
G01 X-44.77262 Y102.31202
G01 X-44.73541 Y102.29658
G01 X-44.68641 Y102.27339
G01 X-44.64064 Y102.24885
G01 X-44.59162 Y102.21947
G01 X-44.53419 Y102.18096
G01 X-44.48520 Y102.14461
G01 X-44.41085 Y102.08337
G01 X-44.36185 Y102.03895
G01 X-44.32553 Y102.00433
G01 X-43.80455 Y102.00433
G01 X-43.80506 Y101.99432
G01 X-43.80506 Y101.49432
G01 X-43.80270 Y101.44629
G01 X-43.79790 Y101.39752
G01 X-43.77915 Y101.30331
G01 X-43.76493 Y101.25640
G01 X-43.72817 Y101.16765
G01 X-43.70567 Y101.12559
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.34704 Y100.49922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.34704 Y100.49922
G01 X-45.35713 Y100.51431
G01 X-45.28260 Y100.58884
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.43155 Y101.13275 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.43155 Y101.13275
G01 X-44.41471 Y101.14591
G01 X-44.41273 Y101.14748
G01 X-44.40193 Y101.16765
G01 X-44.36518 Y101.25640
G01 X-44.35096 Y101.30331
G01 X-44.33221 Y101.39752
G01 X-44.32741 Y101.44629
G01 X-44.32505 Y101.49432
G01 X-44.32505 Y101.99432
G01 X-44.32553 Y102.00433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-43.05678 Y100.75587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-43.05678 Y100.75587
G01 X-43.01118 Y100.71027
G01 X-42.88680 Y100.55874
G01 X-42.84705 Y100.49922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.25861 Y100.61807 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.25861 Y100.61807
G01 X-40.27179 Y100.61347
G01 X-40.35320 Y100.64469
G01 X-40.40773 Y100.67245
G01 X-40.47339 Y100.71266
G01 X-40.53194 Y100.76267
G01 X-40.59930 Y100.83006
G01 X-40.69526 Y100.90367
G01 X-40.73207 Y100.90352
G01 X-40.73064 Y100.90255
G01 X-40.57911 Y100.77819
G01 X-40.53898 Y100.73806
G01 X-40.51116 Y100.71027
G01 X-40.38680 Y100.55874
G01 X-40.34705 Y100.49922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.84705 Y97.38539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.84705 Y97.38539
G01 X-42.80730 Y97.32590
G01 X-42.68294 Y97.17436
G01 X-42.63430 Y97.12572
G01 X-42.61502 Y97.10642
G01 X-42.46348 Y96.98206
G01 X-42.43704 Y96.96441
G01 X-42.43704 Y96.93370
G01 X-42.43773 Y96.93411
G01 X-42.58896 Y97.05016
G01 X-42.65348 Y97.09204
G01 X-42.72373 Y97.12334
G01 X-42.78141 Y97.14376
G01 X-42.88106 Y97.16766
G01 X-42.98350 Y97.17033
G01 X-43.02442 Y97.16273
G01 X-43.02447 Y97.16273
G01 X-43.07865 Y97.13271
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-45.34704 Y97.38536 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-45.34704 Y97.38536
G01 X-45.30729 Y97.32590
G01 X-45.18293 Y97.17436
G01 X-45.11501 Y97.10642
G01 X-45.10203 Y97.09578
G01 X-44.96348 Y96.98206
G01 X-44.93704 Y96.96441
G01 X-44.93704 Y96.15527
G01 X-45.58761 Y95.50470
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.42368 Y94.28946 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.42368 Y94.28946
G01 X-44.38222 Y94.11986
G01 X-44.37006 Y94.09596
G01 X-44.30552 Y94.01628
G01 X-44.26251 Y93.97333
G01 X-44.26196 Y93.97330
G01 X-44.20458 Y93.96764
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-44.25886 Y93.97300 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-44.25886 Y93.97300
G01 X-44.25886 Y93.97297
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-42.63468 Y92.76320 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-42.63468 Y92.76320
G01 X-42.61804 Y92.78052
G01 X-42.61614 Y92.78253
G01 X-42.61342 Y92.81029
G01 X-42.61106 Y92.85832
G01 X-42.61106 Y93.35832
G01 X-42.61342 Y93.40635
G01 X-42.61624 Y93.43490
G01 X-42.61718 Y93.43587
G01 X-42.63460 Y93.45349
G01 X-42.70537 Y93.52880
G01 X-42.74110 Y93.56917
G01 X-42.76635 Y93.59952
G01 X-42.79224 Y93.62908
G01 X-42.80862 Y93.64689
G01 X-42.82609 Y93.66655
G01 X-42.87186 Y93.71994
G01 X-42.88230 Y93.73239
G01 X-42.90306 Y93.75773
G01 X-42.92551 Y93.78385
G01 X-42.95170 Y93.80638
G01 X-42.98964 Y93.83741
G01 X-43.01987 Y93.86078
G01 X-43.04659 Y93.87567
G01 X-43.08992 Y93.89858
G01 X-43.12782 Y93.91717
G01 X-43.15350 Y93.92527
G01 X-43.20051 Y93.93912
G01 X-43.24707 Y93.95113
G01 X-43.26221 Y93.95283
G01 X-43.26785 Y93.95339
G01 X-43.31151 Y93.95748
G01 X-43.31664 Y93.95773
G01 X-43.35106 Y93.95857
G01 X-43.85106 Y93.95857
G01 X-43.87092 Y93.95829
G01 X-43.88545 Y93.95789
G01 X-43.93473 Y93.95819
G01 X-43.95495 Y93.95903
G01 X-44.00237 Y93.95946
G01 X-44.00775 Y93.95933
G01 X-44.05911 Y93.95987
G01 X-44.14682 Y93.96358
G01 X-44.20458 Y93.96764
G01 X-44.25886 Y93.97297
G01 X-44.30079 Y93.94496
G01 X-44.33869 Y93.91387
G01 X-44.40404 Y93.84851
G01 X-44.40404 Y94.20907
G01 X-44.42368 Y94.28946
G01 X-44.42622 Y94.32161
G01 X-44.41613 Y94.35258
G01 X-44.29729 Y94.59060
G01 X-44.26089 Y94.64074
G01 X-44.18857 Y94.72550
G01 X-43.60189 Y95.31219
G01 X-43.57819 Y95.33708
G01 X-43.55507 Y95.36258
G01 X-43.53465 Y95.39012
G01 X-43.49637 Y95.44739
G01 X-43.47872 Y95.47683
G01 X-43.46404 Y95.50790
G01 X-43.43770 Y95.57150
G01 X-43.42614 Y95.60381
G01 X-43.41779 Y95.63716
G01 X-43.40438 Y95.70459
G01 X-43.39932 Y95.73860
G01 X-43.39764 Y95.77287
G01 X-43.39681 Y95.80731
G01 X-43.39681 Y96.58285
G01 X-43.39424 Y96.64272
G01 X-43.39137 Y96.67625
G01 X-43.35327 Y96.85557
G01 X-43.33252 Y96.91676
G01 X-43.30514 Y96.98747
G01 X-43.26224 Y97.02062
G01 X-43.13376 Y97.10330
G01 X-43.09389 Y97.12445
G01 X-43.07865 Y97.13271
G01 X-43.02442 Y97.16273
G01 X-43.02073 Y97.16479
G01 X-43.01118 Y97.17436
G01 X-42.88680 Y97.32590
G01 X-42.84705 Y97.38539
G01 X-42.84705 Y100.49922
G01 X-42.80730 Y100.55874
G01 X-42.68294 Y100.71027
G01 X-42.63890 Y100.75432
G01 X-43.05314 Y100.75432
G01 X-43.05678 Y100.75587
G01 X-43.06506 Y100.75942
G01 X-43.08746 Y100.76803
G01 X-43.11101 Y100.77743
G01 X-43.15833 Y100.79704
G01 X-43.23930 Y100.83527
G01 X-43.27166 Y100.85256
G01 X-43.28339 Y100.85871
G01 X-43.34542 Y100.89064
G01 X-43.35690 Y100.89666
G01 X-43.40011 Y100.91977
G01 X-43.47024 Y100.96184
G01 X-43.51403 Y100.99107
G01 X-43.58294 Y101.03753
G01 X-43.58596 Y101.03953
G01 X-43.62551 Y101.06598
G01 X-43.70470 Y101.12480
G01 X-43.70567 Y101.12559
G01 X-43.75972 Y101.14200
G01 X-43.85393 Y101.16074
G01 X-44.04903 Y101.17994
G01 X-44.14509 Y101.17994
G01 X-44.34019 Y101.16074
G01 X-44.41471 Y101.14591
G01 X-44.41476 Y101.14591
G01 X-44.43155 Y101.13275
G01 X-44.43498 Y101.12993
G01 X-44.51240 Y101.07240
G01 X-44.55500 Y101.04395
G01 X-44.60079 Y101.01535
G01 X-44.62754 Y100.99976
G01 X-44.66950 Y100.97360
G01 X-44.67041 Y100.97299
G01 X-44.73719 Y100.93303
G01 X-44.78042 Y100.90992
G01 X-44.84293 Y100.87989
G01 X-44.85190 Y100.87606
G01 X-44.89678 Y100.85521
G01 X-44.91649 Y100.84533
G01 X-44.97394 Y100.81909
G01 X-45.02126 Y100.79950
G01 X-45.06505 Y100.78261
G01 X-45.10645 Y100.76780
G01 X-45.12055 Y100.76265
G01 X-45.17696 Y100.70540
G01 X-45.28260 Y100.58884
G01 X-45.30729 Y100.55874
G01 X-45.34704 Y100.49922
G01 X-45.34704 Y97.38536
G01 X-45.38682 Y97.32590
G01 X-45.51118 Y97.17436
G01 X-45.57910 Y97.10642
G01 X-45.73063 Y96.98206
G01 X-45.75705 Y96.96443
G01 X-45.75705 Y96.82964
G01 X-45.72009 Y96.78463
G01 X-45.66673 Y96.70474
G01 X-45.59281 Y96.56644
G01 X-45.55606 Y96.47769
G01 X-45.51052 Y96.32763
G01 X-45.49180 Y96.23342
G01 X-45.47641 Y96.07734
G01 X-45.47641 Y95.98128
G01 X-45.49180 Y95.82522
G01 X-45.51052 Y95.73101
G01 X-45.55606 Y95.58092
G01 X-45.58761 Y95.50470
G01 X-45.59515 Y95.49339
G01 X-45.68959 Y95.36606
G01 X-45.74699 Y95.29611
G01 X-45.81011 Y95.22644
G01 X-45.83894 Y95.19304
G01 X-45.85088 Y95.17848
G01 X-45.88354 Y95.14087
G01 X-45.90991 Y95.11214
G01 X-45.94371 Y95.07320
G01 X-45.98809 Y95.01912
G01 X-46.01179 Y94.98908
G01 X-46.01783 Y94.98108
G01 X-46.03630 Y94.93652
G01 X-46.05621 Y94.87086
G01 X-46.07496 Y94.77666
G01 X-46.08166 Y94.70836
G01 X-46.08402 Y94.66032
G01 X-46.08402 Y94.07556
G01 X-46.08862 Y94.07864
G01 X-46.22692 Y94.15255
G01 X-46.31567 Y94.18931
G01 X-46.46574 Y94.23485
G01 X-46.55994 Y94.25359
G01 X-46.71407 Y94.26876
G01 X-46.71618 Y94.26741
G01 X-46.80650 Y94.21247
G01 X-46.94171 Y94.14519
G01 X-46.95687 Y94.13927
G01 X-47.00000 Y94.12093
G01 X-47.02433 Y94.10968
G01 X-47.10429 Y94.07838
G01 X-47.17208 Y94.05646
G01 X-47.21587 Y94.04069
G01 X-47.22677 Y94.03625
G01 X-47.23632 Y94.03119
G01 X-47.37445 Y93.95690
G01 X-47.39421 Y93.94585
G01 X-47.43139 Y93.91811
G01 X-47.50076 Y93.86266
G01 X-47.54374 Y93.82832
G01 X-47.55324 Y93.81933
G01 X-47.60096 Y93.76960
G01 X-47.67193 Y93.68796
G01 X-47.70079 Y93.64864
G01 X-47.73873 Y93.59119
G01 X-47.77569 Y93.52880
G01 X-47.81257 Y93.45283
G01 X-47.83957 Y93.38956
G01 X-47.85235 Y93.35494
G01 X-47.88453 Y93.23932
G01 X-47.89974 Y93.17196
G01 X-47.89992 Y93.17087
G01 X-47.91399 Y93.01578
G01 X-47.91625 Y92.98133
G01 X-47.91399 Y92.94687
G01 X-47.89992 Y92.79177
G01 X-47.89974 Y92.79068
G01 X-47.88453 Y92.72335
G01 X-47.85235 Y92.60770
G01 X-47.83957 Y92.57308
G01 X-47.81257 Y92.50981
G01 X-47.77569 Y92.43384
G01 X-47.73873 Y92.37145
G01 X-47.70079 Y92.31400
G01 X-47.67193 Y92.27468
G01 X-47.60096 Y92.19304
G01 X-47.55324 Y92.14331
G01 X-47.54374 Y92.13432
G01 X-47.43139 Y92.04453
G01 X-47.39423 Y92.01679
G01 X-47.37440 Y92.00572
G01 X-47.23630 Y91.93145
G01 X-47.22677 Y91.92642
G01 X-47.17216 Y91.90623
G01 X-47.04658 Y91.86564
G01 X-47.02227 Y91.85995
G01 X-46.95448 Y91.84755
G01 X-46.85903 Y91.83488
G01 X-46.79845 Y91.83191
G01 X-46.72964 Y91.83191
G01 X-46.66906 Y91.83488
G01 X-46.57358 Y91.84755
G01 X-46.50577 Y91.85995
G01 X-46.48151 Y91.86564
G01 X-46.35593 Y91.90623
G01 X-46.30130 Y91.92642
G01 X-46.29180 Y91.93145
G01 X-46.15370 Y92.00572
G01 X-46.13386 Y92.01679
G01 X-46.09670 Y92.04453
G01 X-45.98435 Y92.13434
G01 X-45.98062 Y92.13788
G01 X-45.97483 Y92.14326
G01 X-45.95502 Y92.16157
G01 X-45.94079 Y92.17509
G01 X-45.92456 Y92.19094
G01 X-45.84491 Y92.25830
G01 X-45.82025 Y92.26261
G01 X-45.75906 Y92.27229
G01 X-45.64816 Y92.28108
G01 X-44.07864 Y92.28108
G01 X-44.02990 Y92.27938
G01 X-44.01225 Y92.27816
G01 X-44.00260 Y92.27603
G01 X-44.00211 Y92.27592
G01 X-43.95489 Y92.26548
G01 X-43.93424 Y92.26325
G01 X-43.89061 Y92.25916
G01 X-43.88545 Y92.25891
G01 X-43.85106 Y92.25807
G01 X-43.35106 Y92.25807
G01 X-43.31664 Y92.25891
G01 X-43.31149 Y92.25916
G01 X-43.26785 Y92.26325
G01 X-43.24707 Y92.26551
G01 X-43.20051 Y92.27752
G01 X-43.15350 Y92.29137
G01 X-43.12782 Y92.29947
G01 X-43.08992 Y92.31809
G01 X-43.04659 Y92.34097
G01 X-43.01990 Y92.35586
G01 X-42.98964 Y92.37923
G01 X-42.95172 Y92.41026
G01 X-42.94535 Y92.41552
G01 X-42.92548 Y92.43282
G01 X-42.90306 Y92.45891
G01 X-42.88228 Y92.48428
G01 X-42.87189 Y92.49670
G01 X-42.86579 Y92.50381
G01 X-42.85647 Y92.51489
G01 X-42.82711 Y92.55063
G01 X-42.79381 Y92.58839
G01 X-42.75993 Y92.62439
G01 X-42.73935 Y92.64702
G01 X-42.71540 Y92.67435
G01 X-42.70372 Y92.68743
G01 X-42.63468 Y92.76320
G01 X-42.61807 Y92.78052
G01 X-42.61804 Y92.78052
G01 X-42.54834 Y92.78837
G01 X-42.44644 Y92.77844
G01 X-42.38652 Y92.76617
G01 X-42.28965 Y92.73559
G01 X-42.20118 Y92.68568
G01 X-42.12488 Y92.61862
G01 X-42.08487 Y92.57531
G01 X-42.03880 Y92.51715
G01 X-42.03752 Y92.51527
G01 X-42.03570 Y92.51204
G01 X-41.94106 Y92.37542
G01 X-41.94106 Y92.41359
G01 X-41.99107 Y92.48845
G01 X-42.01416 Y92.53165
G01 X-42.05094 Y92.62040
G01 X-42.06516 Y92.66731
G01 X-42.08391 Y92.76152
G01 X-42.08871 Y92.81029
G01 X-42.09107 Y92.85832
G01 X-42.09107 Y92.91039
G01 X-42.17227 Y92.99162
G01 X-42.19102 Y93.01037
G01 X-42.22333 Y93.04600
G01 X-42.26684 Y93.09904
G01 X-42.32020 Y93.17889
G01 X-42.35256 Y93.23940
G01 X-42.38931 Y93.32814
G01 X-42.40923 Y93.39380
G01 X-42.41911 Y93.44344
G01 X-42.47042 Y93.43510
G01 X-42.53153 Y93.43167
G01 X-42.61718 Y93.43587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-40.16892 Y97.16207 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-40.16892 Y97.16207
G01 X-40.21596 Y97.16702
G01 X-40.27715 Y97.16702
G01 X-40.39473 Y97.15270
G01 X-40.50542 Y97.11059
G01 X-40.53509 Y97.09496
G01 X-40.60509 Y97.05016
G01 X-40.75632 Y96.93411
G01 X-40.75703 Y96.93370
G01 X-40.75703 Y96.96443
G01 X-40.73064 Y96.98206
G01 X-40.57911 Y97.10642
G01 X-40.51116 Y97.17436
G01 X-40.38680 Y97.32590
G01 X-40.34705 Y97.38539
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.84703 Y97.38536 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.84703 Y97.38536
G01 X-37.88681 Y97.32590
G01 X-38.01117 Y97.17436
G01 X-38.07909 Y97.10642
G01 X-38.22905 Y96.98338
G01 X-38.11498 Y96.86931
G01 X-37.57850 Y96.86931
G01 X-37.54851 Y96.90586
G01 X-37.48059 Y96.97378
G01 X-37.46697 Y96.98496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-33.87983 Y92.41733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-33.87983 Y92.41733
G01 X-34.98290 Y93.52035
G01 X-35.01519 Y93.55596
G01 X-35.05872 Y93.60899
G01 X-35.11209 Y93.68888
G01 X-35.14442 Y93.74938
G01 X-35.18120 Y93.83813
G01 X-35.20111 Y93.90378
G01 X-35.21986 Y93.99799
G01 X-35.22657 Y94.06629
G01 X-35.22893 Y94.11430
G01 X-35.22893 Y97.60784
G01 X-35.24104 Y97.57866
G01 X-35.33345 Y97.40576
G01 X-35.38681 Y97.32590
G01 X-35.48311 Y97.20855
G01 X-35.51117 Y97.17436
G01 X-35.57909 Y97.10642
G01 X-35.73063 Y96.98206
G01 X-35.73446 Y96.97950
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-37.84703 Y100.43324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-37.84703 Y100.43324
G01 X-37.88079 Y100.45356
G01 X-37.95684 Y100.50131
G01 X-38.03273 Y100.55528
G01 X-38.08142 Y100.59445
G01 X-38.11612 Y100.62419
G01 X-38.16723 Y100.67085
G01 X-38.20715 Y100.70702
G01 X-38.31856 Y100.79544
G01 X-38.34609 Y100.81622
G01 X-38.37581 Y100.83372
G01 X-38.50012 Y100.90278
G01 X-38.54883 Y100.92584
G01 X-38.61246 Y100.95218
G01 X-38.66321 Y100.97034
G01 X-38.79996 Y101.00938
G01 X-38.83337 Y101.01805
G01 X-38.86750 Y101.02282
G01 X-39.00878 Y101.03908
G01 X-39.06263 Y101.04174
G01 X-39.13149 Y101.04174
G01 X-39.18531 Y101.03908
G01 X-39.32661 Y101.02282
G01 X-39.36072 Y101.01805
G01 X-39.39412 Y101.00938
G01 X-39.45866 Y100.99097
G01 X-39.53090 Y100.97034
G01 X-39.58162 Y100.95218
G01 X-39.64525 Y100.92584
G01 X-39.69397 Y100.90278
G01 X-39.81828 Y100.83372
G01 X-39.84893 Y100.81563
G01 X-39.86709 Y100.80296
G01 X-39.87632 Y100.79640
G01 X-39.88185 Y100.79242
G01 X-40.01149 Y100.71784
G01 X-40.05091 Y100.70016
G01 X-40.06928 Y100.69163
G01 X-40.12663 Y100.66415
G01 X-40.25861 Y100.61807
G01 X-40.30730 Y100.55874
G01 X-40.34705 Y100.49922
G01 X-40.34705 Y97.38539
G01 X-40.30730 Y97.32590
G01 X-40.18294 Y97.17436
G01 X-40.17245 Y97.16387
G01 X-40.16892 Y97.16207
G01 X-40.09869 Y97.12628
G01 X-39.95533 Y97.03573
G01 X-39.93336 Y97.01874
G01 X-39.90652 Y96.99883
G01 X-39.88990 Y96.98694
G01 X-39.81576 Y96.75493
G01 X-39.80608 Y96.69375
G01 X-39.80194 Y96.66344
G01 X-39.79796 Y96.62885
G01 X-39.79493 Y96.59596
G01 X-39.78973 Y96.56073
G01 X-39.77629 Y96.49329
G01 X-39.76793 Y96.45994
G01 X-39.75638 Y96.42763
G01 X-39.73006 Y96.36403
G01 X-39.71536 Y96.33296
G01 X-39.70718 Y96.31932
G01 X-39.69773 Y96.30353
G01 X-39.65945 Y96.24625
G01 X-39.63898 Y96.21866
G01 X-39.61591 Y96.19321
G01 X-39.59219 Y96.16832
G01 X-39.03121 Y95.60731
G01 X-38.95805 Y95.53419
G01 X-38.93316 Y95.51046
G01 X-38.90769 Y95.48737
G01 X-38.88013 Y95.46693
G01 X-38.82285 Y95.42865
G01 X-38.79339 Y95.41100
G01 X-38.76235 Y95.39631
G01 X-38.69875 Y95.36997
G01 X-38.66644 Y95.35842
G01 X-38.63309 Y95.35006
G01 X-38.56565 Y95.33665
G01 X-38.53166 Y95.33162
G01 X-38.49737 Y95.32992
G01 X-38.46293 Y95.32908
G01 X-37.75356 Y95.32908
G01 X-37.69837 Y95.32690
G01 X-37.66738 Y95.32446
G01 X-37.52648 Y95.29929
G01 X-37.50233 Y95.27747
G01 X-37.45747 Y95.23515
G01 X-37.45313 Y95.23106
G01 X-37.40134 Y95.18140
G01 X-37.33362 Y95.10708
G01 X-37.32278 Y95.05204
G01 X-37.31307 Y94.99085
G01 X-37.30429 Y94.87981
G01 X-37.30429 Y94.09428
G01 X-37.30457 Y94.07412
G01 X-37.30490 Y94.06264
G01 X-37.32133 Y93.92972
G01 X-37.32765 Y93.90074
G01 X-37.34785 Y93.87457
G01 X-37.39402 Y93.82032
G01 X-37.42278 Y93.78974
G01 X-37.44096 Y93.76960
G01 X-37.48838 Y93.71506
G01 X-37.51191 Y93.68799
G01 X-37.54079 Y93.64864
G01 X-37.57873 Y93.59119
G01 X-37.61569 Y93.52880
G01 X-37.65257 Y93.45283
G01 X-37.67957 Y93.38956
G01 X-37.69240 Y93.35484
G01 X-37.72453 Y93.23932
G01 X-37.73974 Y93.17196
G01 X-37.73992 Y93.17087
G01 X-37.75399 Y93.01578
G01 X-37.75625 Y92.98133
G01 X-37.75399 Y92.94687
G01 X-37.73992 Y92.79177
G01 X-37.73974 Y92.79068
G01 X-37.72453 Y92.72335
G01 X-37.69235 Y92.60770
G01 X-37.67957 Y92.57308
G01 X-37.65257 Y92.50981
G01 X-37.61569 Y92.43384
G01 X-37.57873 Y92.37145
G01 X-37.54079 Y92.31400
G01 X-37.51193 Y92.27468
G01 X-37.44096 Y92.19304
G01 X-37.39324 Y92.14331
G01 X-37.38374 Y92.13432
G01 X-37.27139 Y92.04453
G01 X-37.23423 Y92.01679
G01 X-37.21440 Y92.00572
G01 X-37.07630 Y91.93145
G01 X-37.06677 Y91.92642
G01 X-37.01216 Y91.90623
G01 X-36.88658 Y91.86564
G01 X-36.86227 Y91.85995
G01 X-36.79448 Y91.84755
G01 X-36.69903 Y91.83488
G01 X-36.63845 Y91.83191
G01 X-36.63020 Y91.83155
G01 X-36.60266 Y91.83054
G01 X-36.58712 Y91.83013
G01 X-36.56944 Y91.82985
G01 X-36.46512 Y91.82073
G01 X-36.44734 Y91.80818
G01 X-36.39723 Y91.77178
G01 X-36.31252 Y91.69952
G01 X-35.69520 Y91.08217
G01 X-35.67028 Y91.05848
G01 X-35.64480 Y91.03539
G01 X-35.61724 Y91.01494
G01 X-35.55997 Y90.97666
G01 X-35.53053 Y90.95901
G01 X-35.49946 Y90.94433
G01 X-35.43586 Y90.91799
G01 X-35.40355 Y90.90643
G01 X-35.37020 Y90.89808
G01 X-35.30277 Y90.88466
G01 X-35.26876 Y90.87961
G01 X-35.23449 Y90.87793
G01 X-35.20005 Y90.87707
G01 X-19.04171 Y90.87707
G01 X-18.92769 Y90.93102
G01 X-18.87191 Y90.95418
G01 X-18.71509 Y91.01029
G01 X-18.67377 Y91.02287
G01 X-18.51695 Y91.06213
G01 X-18.48520 Y91.06846
G01 X-18.32835 Y91.09173
G01 X-18.30206 Y91.09432
G01 X-18.14524 Y91.10204
G01 X-18.12063 Y91.10204
G01 X-17.96381 Y91.09432
G01 X-17.93750 Y91.09173
G01 X-17.78065 Y91.06846
G01 X-17.74888 Y91.06213
G01 X-17.59208 Y91.02287
G01 X-17.55076 Y91.01029
G01 X-17.39394 Y90.95418
G01 X-17.33816 Y90.93102
G01 X-17.22414 Y90.87707
G01 X-16.73841 Y90.87707
G01 X-16.71779 Y90.87679
G01 X-16.70613 Y90.87644
G01 X-16.57293 Y90.85987
G01 X-16.51174 Y90.84646
G01 X-16.36910 Y90.80115
G01 X-16.33186 Y90.69068
G01 X-16.31588 Y90.62950
G01 X-16.30143 Y90.56135
G01 X-16.29574 Y90.52655
G01 X-16.29412 Y90.51621
G01 X-16.28558 Y90.45860
G01 X-16.27215 Y90.39117
G01 X-16.26379 Y90.35779
G01 X-16.25223 Y90.32551
G01 X-16.22592 Y90.26191
G01 X-16.21121 Y90.23079
G01 X-16.19358 Y90.20140
G01 X-16.15531 Y90.14413
G01 X-16.13488 Y90.11657
G01 X-16.11174 Y90.09109
G01 X-16.08807 Y90.06618
G01 X-16.01489 Y89.99302
G01 X-15.65691 Y89.63504
G01 X-14.20835 Y88.18645
G01 X-14.19935 Y88.17730
G01 X-14.19425 Y88.17200
G01 X-14.11536 Y88.07408
G01 X-14.08947 Y88.03555
G01 X-14.08543 Y88.02953
G01 X-14.08416 Y88.02097
G01 X-14.07601 Y87.92607
G01 X-14.07560 Y87.90616
G01 X-14.07286 Y87.85686
G01 X-14.05879 Y87.70179
G01 X-14.05861 Y87.70070
G01 X-14.04342 Y87.63339
G01 X-14.01124 Y87.51769
G01 X-13.99846 Y87.48312
G01 X-13.97144 Y87.41975
G01 X-13.93458 Y87.34385
G01 X-13.89758 Y87.28140
G01 X-13.85965 Y87.22399
G01 X-13.83082 Y87.18470
G01 X-13.75983 Y87.10304
G01 X-13.74162 Y87.08289
G01 X-13.72778 Y87.06816
G01 X-13.71985 Y87.05986
G01 X-13.71274 Y87.05254
G01 X-13.64543 Y86.97240
G01 X-13.64162 Y86.95043
G01 X-13.63194 Y86.88927
G01 X-13.62318 Y86.77837
G01 X-13.62318 Y85.98668
G01 X-13.62346 Y85.96646
G01 X-13.62379 Y85.95503
G01 X-13.64022 Y85.82214
G01 X-13.64802 Y85.78645
G01 X-13.66397 Y85.76573
G01 X-13.74012 Y85.68137
G01 X-13.74038 Y85.68112
G01 X-13.78785 Y85.63161
G01 X-13.85884 Y85.54993
G01 X-13.88767 Y85.51063
G01 X-13.92562 Y85.45320
G01 X-13.96260 Y85.39080
G01 X-13.99946 Y85.31485
G01 X-14.02646 Y85.25158
G01 X-14.03923 Y85.21696
G01 X-14.07141 Y85.10131
G01 X-14.08663 Y85.03395
G01 X-14.08681 Y85.03286
G01 X-14.10088 Y84.87777
G01 X-14.10314 Y84.84333
G01 X-14.10088 Y84.80886
G01 X-14.08681 Y84.65379
G01 X-14.08663 Y84.65270
G01 X-14.07141 Y84.58534
G01 X-14.03923 Y84.46969
G01 X-14.02646 Y84.43507
G01 X-13.99946 Y84.37180
G01 X-13.96260 Y84.29585
G01 X-13.92562 Y84.23345
G01 X-13.88767 Y84.17602
G01 X-13.85884 Y84.13670
G01 X-13.78785 Y84.05504
G01 X-13.74721 Y84.01211
G01 X-13.74700 Y84.01191
G01 X-13.74010 Y84.00530
G01 X-13.72580 Y83.99138
G01 X-13.71767 Y83.98323
G01 X-13.64675 Y83.90081
G01 X-13.64162 Y83.87203
G01 X-13.63194 Y83.81087
G01 X-13.62318 Y83.69997
G01 X-13.62318 Y83.31084
G01 X-13.62371 Y83.28328
G01 X-13.62432 Y83.26776
G01 X-13.64396 Y83.12705
G01 X-13.64634 Y83.11714
G01 X-13.67919 Y83.07630
G01 X-13.71579 Y83.03418
G01 X-13.75452 Y82.99296
G01 X-13.76301 Y82.98374
G01 X-13.80057 Y82.94231
G01 X-13.83077 Y82.90322
G01 X-13.86379 Y82.86357
G01 X-13.90398 Y82.81877
G01 X-13.91104 Y82.81077
G01 X-13.94525 Y82.77150
G01 X-14.02371 Y82.69316
G01 X-14.09417 Y82.63162
G01 X-14.11848 Y82.61105
G01 X-14.16534 Y82.60985
G01 X-14.22651 Y82.60985
G01 X-14.27337 Y82.61105
G01 X-14.29768 Y82.63162
G01 X-14.36814 Y82.69316
G01 X-14.44660 Y82.77150
G01 X-14.48081 Y82.81077
G01 X-14.48787 Y82.81877
G01 X-14.52805 Y82.86357
G01 X-14.56107 Y82.90322
G01 X-14.59128 Y82.94231
G01 X-14.62884 Y82.98374
G01 X-14.67751 Y83.03241
G01 X-14.71894 Y83.06995
G01 X-14.79890 Y83.13172
G01 X-14.85546 Y83.17114
G01 X-14.86448 Y83.17681
G01 X-14.99409 Y83.24445
G01 X-15.02508 Y83.25966
G01 X-15.05775 Y83.27081
G01 X-15.19722 Y83.31463
G01 X-15.20763 Y83.31701
G01 X-15.27542 Y83.32910
G01 X-15.37565 Y83.34198
G01 X-15.43146 Y83.34473
G01 X-15.50037 Y83.34473
G01 X-15.55617 Y83.34198
G01 X-15.65642 Y83.32910
G01 X-15.72422 Y83.31701
G01 X-15.73463 Y83.31463
G01 X-15.87408 Y83.27081
G01 X-15.90677 Y83.25966
G01 X-15.93775 Y83.24445
G01 X-16.06735 Y83.17681
G01 X-16.07639 Y83.17114
G01 X-16.13295 Y83.13172
G01 X-16.21294 Y83.06990
G01 X-16.25592 Y83.03431
G01 X-16.27166 Y83.02227
G01 X-16.30580 Y82.99448
G01 X-16.31080 Y82.99014
G01 X-16.44461 Y82.89708
G01 X-16.48650 Y82.87378
G01 X-16.52579 Y82.85072
G01 X-16.54677 Y82.83777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.73592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.73592 Y82.41077
G01 X-16.71947 Y82.49362
G01 X-16.67395 Y82.64371
G01 X-16.63717 Y82.73243
G01 X-16.59417 Y82.81287
G01 X-16.59417 Y82.81293
G01 X-16.54677 Y82.83777
G01 X-16.59417 Y82.81287
G01 X-16.59658 Y82.81163
G01 X-16.64819 Y82.81569
G01 X-16.74652 Y82.84480
G01 X-16.77496 Y82.86025
G01 X-16.83399 Y82.85090
G01 X-16.89625 Y82.84762
G01 X-16.83468 Y82.73243
G01 X-16.79793 Y82.64371
G01 X-16.75241 Y82.49362
G01 X-16.73592 Y82.41077
G01 X-16.73592 Y81.43096
G01 X-16.75068 Y81.39530
G01 X-16.76976 Y81.35230
G01 X-16.84098 Y81.20175
G01 X-16.87669 Y81.13475
G01 X-16.95980 Y80.99606
G01 X-16.99475 Y80.94376
G01 X-17.08916 Y80.81641
G01 X-17.12447 Y80.77338
G01 X-17.22990 Y80.65705
G01 X-17.26765 Y80.61933
G01 X-17.37758 Y80.51969
G01 X-17.38622 Y80.51659
G01 X-17.43879 Y80.50061
G01 X-17.59561 Y80.46134
G01 X-17.63808 Y80.45286
G01 X-17.79493 Y80.42959
G01 X-17.83163 Y80.42599
G01 X-17.98847 Y80.41826
G01 X-18.02340 Y80.41826
G01 X-18.18022 Y80.42599
G01 X-18.21692 Y80.42959
G01 X-18.37377 Y80.45286
G01 X-18.41624 Y80.46134
G01 X-18.57306 Y80.50061
G01 X-18.62563 Y80.51659
G01 X-18.78245 Y80.57272
G01 X-18.85032 Y80.60089
G01 X-19.00717 Y80.67508
G01 X-19.09701 Y80.72324
G01 X-19.10882 Y80.73033
G01 X-19.17719 Y80.85819
G01 X-19.21395 Y80.94691
G01 X-19.25947 Y81.09700
G01 X-19.27592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.10882 Y80.73033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.10882 Y80.73033
G01 X-19.44303 Y80.73033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.63725 Y84.84333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.63725 Y84.84333
G01 X-16.64601 Y84.96032
G01 X-16.66793 Y84.93840
G01 X-16.66331 Y84.89133
G01 X-16.66331 Y84.79529
G01 X-16.66793 Y84.74828
G01 X-16.64601 Y84.72636
G01 X-16.63725 Y84.84333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-17.60087 Y86.38132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-17.60087 Y86.38132
G01 X-17.85586 Y86.12633
G01 X-17.90290 Y86.13095
G01 X-17.99896 Y86.13095
G01 X-18.04598 Y86.12633
G01 X-18.27298 Y86.35333
G01 X-18.01802 Y86.60830
G01 X-17.97097 Y86.60367
G01 X-17.87491 Y86.60367
G01 X-17.82787 Y86.60830
G01 X-17.60087 Y86.38132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-16.60925 Y87.89133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-16.60925 Y87.89133
G01 X-16.61802 Y88.00829
G01 X-16.63991 Y87.98637
G01 X-16.63529 Y87.93933
G01 X-16.63529 Y87.84329
G01 X-16.63991 Y87.79628
G01 X-16.61802 Y87.77436
G01 X-16.60925 Y87.89133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.20595 Y87.79625 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.20595 Y87.79625
G01 X-19.21057 Y87.84329
G01 X-19.21057 Y87.93933
G01 X-19.20595 Y87.98640
G01 X-19.22784 Y88.00829
G01 X-19.23661 Y87.89133
G01 X-19.22784 Y87.77436
G01 X-19.20595 Y87.79625
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.23394 Y84.74825 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.23394 Y84.74825
G01 X-19.25583 Y84.72636
G01 X-19.26460 Y84.84333
G01 X-19.25583 Y84.96029
G01 X-19.23394 Y84.93840
G01 X-19.23859 Y84.89133
G01 X-19.23859 Y84.79529
G01 X-19.23394 Y84.74825
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-19.41674 Y82.81117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-19.41674 Y82.81117
G01 X-19.37468 Y82.73243
G01 X-19.33793 Y82.64371
G01 X-19.29241 Y82.49362
G01 X-19.27592 Y82.41077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.77109 Y82.58587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.77109 Y82.58587
G01 X-21.78534 Y82.58440
G01 X-21.84653 Y82.58440
G01 X-21.86073 Y82.58587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X-21.81592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-21.81592 Y82.41077
G01 X-21.79947 Y82.49362
G01 X-21.77160 Y82.58549
G01 X-21.77109 Y82.58587
G01 X-21.77109 Y82.58590
G01 X-21.71417 Y82.63162
G01 X-21.64371 Y82.69316
G01 X-21.56525 Y82.77150
G01 X-21.53104 Y82.81077
G01 X-21.52398 Y82.81877
G01 X-21.48379 Y82.86357
G01 X-21.45077 Y82.90322
G01 X-21.42057 Y82.94231
G01 X-21.38301 Y82.98374
G01 X-21.33434 Y83.03241
G01 X-21.29291 Y83.06995
G01 X-21.21295 Y83.13172
G01 X-21.15639 Y83.17114
G01 X-21.14737 Y83.17681
G01 X-21.01775 Y83.24445
G01 X-20.98677 Y83.25966
G01 X-20.95410 Y83.27081
G01 X-20.81463 Y83.31463
G01 X-20.80422 Y83.31701
G01 X-20.73642 Y83.32910
G01 X-20.63620 Y83.34198
G01 X-20.58039 Y83.34473
G01 X-20.51148 Y83.34473
G01 X-20.45565 Y83.34198
G01 X-20.35542 Y83.32910
G01 X-20.28763 Y83.31701
G01 X-20.27722 Y83.31463
G01 X-20.13775 Y83.27081
G01 X-20.10508 Y83.25966
G01 X-20.07409 Y83.24445
G01 X-19.94448 Y83.17681
G01 X-19.93546 Y83.17114
G01 X-19.87890 Y83.13172
G01 X-19.79883 Y83.06990
G01 X-19.75593 Y83.03431
G01 X-19.71405 Y83.00228
G01 X-19.69983 Y82.99113
G01 X-19.66523 Y82.96332
G01 X-19.56800 Y82.89644
G01 X-19.48814 Y82.84960
G01 X-19.42017 Y82.81287
G01 X-19.41674 Y82.81117
G01 X-19.35936 Y82.82027
G01 X-19.27445 Y82.84163
G01 X-19.19467 Y82.87780
G01 X-19.19345 Y82.87864
G01 X-19.14892 Y82.86154
G01 X-19.11136 Y82.85560
G01 X-19.17719 Y82.73243
G01 X-19.21395 Y82.64371
G01 X-19.25947 Y82.49362
G01 X-19.27592 Y82.41077
G01 X-19.27592 Y81.17973
G01 X-19.29241 Y81.09700
G01 X-19.33793 Y80.94691
G01 X-19.37468 Y80.85819
G01 X-19.44303 Y80.73033
G01 X-19.45484 Y80.72324
G01 X-19.54468 Y80.67508
G01 X-19.70153 Y80.60089
G01 X-19.76940 Y80.57272
G01 X-19.92622 Y80.51659
G01 X-19.97879 Y80.50061
G01 X-20.13561 Y80.46134
G01 X-20.17808 Y80.45286
G01 X-20.33493 Y80.42959
G01 X-20.37163 Y80.42599
G01 X-20.52847 Y80.41826
G01 X-20.56340 Y80.41826
G01 X-20.72022 Y80.42599
G01 X-20.75692 Y80.42959
G01 X-20.91377 Y80.45286
G01 X-20.95624 Y80.46134
G01 X-21.11306 Y80.50061
G01 X-21.16563 Y80.51659
G01 X-21.32245 Y80.57272
G01 X-21.39032 Y80.60089
G01 X-21.54717 Y80.67508
G01 X-21.63701 Y80.72324
G01 X-21.64882 Y80.73033
G01 X-21.71719 Y80.85819
G01 X-21.75395 Y80.94691
G01 X-21.79947 Y81.09700
G01 X-21.81592 Y81.17973
G01 X-21.81592 Y82.41077
G01 X-21.83241 Y82.49362
G01 X-21.86027 Y82.58552
G01 X-21.86073 Y82.58587
G01 X-21.86076 Y82.58590
G01 X-21.91768 Y82.63162
G01 X-21.98814 Y82.69316
G01 X-22.06660 Y82.77150
G01 X-22.10081 Y82.81077
G01 X-22.10787 Y82.81877
G01 X-22.14805 Y82.86357
G01 X-22.18107 Y82.90322
G01 X-22.21128 Y82.94231
G01 X-22.24884 Y82.98374
G01 X-22.29751 Y83.03241
G01 X-22.33894 Y83.06995
G01 X-22.41890 Y83.13172
G01 X-22.47546 Y83.17114
G01 X-22.48448 Y83.17681
G01 X-22.61409 Y83.24445
G01 X-22.64508 Y83.25966
G01 X-22.67775 Y83.27081
G01 X-22.81722 Y83.31463
G01 X-22.82763 Y83.31701
G01 X-22.89542 Y83.32910
G01 X-22.99565 Y83.34198
G01 X-23.05148 Y83.34473
G01 X-23.12039 Y83.34473
G01 X-23.17620 Y83.34198
G01 X-23.27642 Y83.32910
G01 X-23.34422 Y83.31701
G01 X-23.35463 Y83.31463
G01 X-23.49410 Y83.27081
G01 X-23.52677 Y83.25966
G01 X-23.55775 Y83.24445
G01 X-23.68737 Y83.17681
G01 X-23.69639 Y83.17114
G01 X-23.75295 Y83.13172
G01 X-23.83291 Y83.06995
G01 X-23.87434 Y83.03241
G01 X-23.92301 Y82.98374
G01 X-23.96057 Y82.94231
G01 X-23.99077 Y82.90322
G01 X-24.02379 Y82.86357
G01 X-24.06398 Y82.81877
G01 X-24.07104 Y82.81077
G01 X-24.10525 Y82.77150
G01 X-24.18371 Y82.69316
G01 X-24.25417 Y82.63162
G01 X-24.31109 Y82.58590
G01 X-24.31109 Y82.58587
G01 X-24.31160 Y82.58549
G01 X-24.33947 Y82.49362
G01 X-24.35592 Y82.41077
G01 X-24.35592 Y81.17973
G01 X-24.37241 Y81.09700
G01 X-24.41793 Y80.94691
G01 X-24.45468 Y80.85819
G01 X-24.52303 Y80.73033
G01 X-24.53484 Y80.72324
G01 X-24.59245 Y80.69106
G01 X-24.62415 Y80.67463
G01 X-24.63471 Y80.66906
G01 X-24.70020 Y80.63406
G01 X-24.76956 Y80.59256
G01 X-24.77055 Y80.59190
G01 X-24.83014 Y80.55591
G01 X-24.83390 Y80.55385
G01 X-24.89006 Y80.51999
G01 X-24.94739 Y80.48171
G01 X-24.96664 Y80.46835
G01 X-25.00174 Y80.44313
G01 X-25.02095 Y80.42980
G01 X-25.05882 Y80.40450
G01 X-25.08683 Y80.38476
G01 X-25.14975 Y80.33810
G01 X-25.21091 Y80.29728
G01 X-25.34960 Y80.21418
G01 X-25.42669 Y80.17303
G01 X-25.56141 Y80.10932
G01 X-25.57792 Y80.10767
G01 X-25.67396 Y80.10767
G01 X-25.83004 Y80.12304
G01 X-25.92425 Y80.14179
G01 X-26.07434 Y80.18730
G01 X-26.16306 Y80.22406
G01 X-26.30139 Y80.29800
G01 X-26.38124 Y80.35136
G01 X-26.50248 Y80.45085
G01 X-26.57040 Y80.51877
G01 X-26.65092 Y80.61689
G01 X-26.66989 Y80.64001
G01 X-26.72326 Y80.71986
G01 X-26.79719 Y80.85819
G01 X-26.83395 Y80.94691
G01 X-26.87947 Y81.09700
G01 X-26.89592 Y81.17973
G01 X-26.89592 Y82.41077
G01 X-26.91241 Y82.49362
G01 X-26.94027 Y82.58552
G01 X-26.94073 Y82.58587
G01 X-26.94076 Y82.58590
G01 X-26.99768 Y82.63162
G01 X-27.06814 Y82.69316
G01 X-27.14660 Y82.77150
G01 X-27.18081 Y82.81077
G01 X-27.18787 Y82.81877
G01 X-27.22805 Y82.86357
G01 X-27.26107 Y82.90322
G01 X-27.29128 Y82.94231
G01 X-27.32884 Y82.98374
G01 X-27.33443 Y82.98986
G01 X-27.35323 Y83.01008
G01 X-27.36392 Y83.02136
G01 X-27.37619 Y83.03401
G01 X-27.44347 Y83.11419
G01 X-27.44721 Y83.13578
G01 X-27.45688 Y83.19697
G01 X-27.46567 Y83.30784
G01 X-27.46567 Y83.82730
G01 X-27.46651 Y83.86174
G01 X-27.46821 Y83.89603
G01 X-27.47324 Y83.93004
G01 X-27.48668 Y83.99751
G01 X-27.49503 Y84.03083
G01 X-27.50659 Y84.06316
G01 X-27.53293 Y84.12677
G01 X-27.54761 Y84.15783
G01 X-27.56524 Y84.18727
G01 X-27.60352 Y84.24455
G01 X-27.62396 Y84.27210
G01 X-27.64705 Y84.29758
G01 X-27.67078 Y84.32247
G01 X-28.15338 Y84.80507
G01 X-28.17827 Y84.82880
G01 X-28.20375 Y84.85189
G01 X-28.23130 Y84.87233
G01 X-28.28858 Y84.91061
G01 X-28.31802 Y84.92824
G01 X-28.34908 Y84.94292
G01 X-28.41269 Y84.96926
G01 X-28.44502 Y84.98084
G01 X-28.47834 Y84.98917
G01 X-28.53778 Y85.00136
G01 X-28.54581 Y85.00261
G01 X-28.57984 Y85.00764
G01 X-28.61411 Y85.00934
G01 X-28.64855 Y85.01018
G01 X-62.11920 Y85.01018
G01 X-62.20210 Y85.01508
G01 X-62.24833 Y85.02057
G01 X-62.45877 Y85.07660
G01 X-62.51996 Y85.10192
G01 X-62.60777 Y85.14990
G01 X-62.62405 Y85.15882
G01 X-62.66484 Y85.23885
G01 X-62.68859 Y85.32770
G01 X-62.68572 Y85.33868
G01 X-62.66451 Y85.40398
G01 X-62.54546 Y85.64236
G01 X-62.50906 Y85.69247
G01 X-62.43685 Y85.77708
G01 X-60.69078 Y87.52318
G01 X-60.66705 Y87.54807
G01 X-60.64396 Y87.57355
G01 X-60.62352 Y87.60110
G01 X-60.58524 Y87.65838
G01 X-60.56761 Y87.68782
G01 X-60.55293 Y87.71888
G01 X-60.52659 Y87.78249
G01 X-60.51503 Y87.81482
G01 X-60.50668 Y87.84815
G01 X-60.49324 Y87.91558
G01 X-60.48821 Y87.94962
G01 X-60.48651 Y87.98386
G01 X-60.48567 Y88.01830
G01 X-60.48567 Y89.53890
G01 X-60.48349 Y89.59412
G01 X-60.48105 Y89.62510
G01 X-60.44605 Y89.79854
G01 X-60.42619 Y89.85972
G01 X-60.40797 Y89.91047
G01 X-60.20866 Y89.96968
G01 X-60.14747 Y89.97938
G01 X-60.03642 Y89.98817
G01 X-54.12165 Y89.98817
G01 X-54.08721 Y89.98901
G01 X-54.05294 Y89.99069
G01 X-54.01891 Y89.99574
G01 X-53.95145 Y90.00915
G01 X-53.91812 Y90.01751
G01 X-53.88579 Y90.02909
G01 X-53.82219 Y90.05541
G01 X-53.80174 Y90.06508
G01 X-53.79115 Y90.07009
G01 X-53.76168 Y90.08774
G01 X-53.70441 Y90.12602
G01 X-53.70354 Y90.12668
G01 X-53.67692 Y90.14641
G01 X-53.65137 Y90.16958
G01 X-53.62648 Y90.19328
G01 X-52.56125 Y91.25850
G01 X-52.54136 Y91.27763
G01 X-52.52996 Y91.28817
G01 X-52.42163 Y91.37064
G01 X-52.41566 Y91.37161
G01 X-52.35447 Y91.38129
G01 X-52.24358 Y91.39007
G01 X-51.36974 Y91.39007
G01 X-51.32907 Y91.39124
G01 X-51.31157 Y91.39330
G01 X-51.22544 Y91.41977
G01 X-51.15295 Y91.46361
G01 X-51.09301 Y91.52353
G01 X-51.05684 Y91.58184
G01 X-51.04914 Y91.59607
G01 X-51.02270 Y91.68217
G01 X-51.02064 Y91.69967
G01 X-51.01947 Y91.74031
G01 X-51.01947 Y93.44031
G01 X-51.02064 Y93.48098
G01 X-51.02270 Y93.49848
G01 X-51.04917 Y93.58461
G01 X-51.09301 Y93.65710
G01 X-51.15295 Y93.71704
G01 X-51.22544 Y93.76088
G01 X-51.31157 Y93.78735
G01 X-51.32907 Y93.78941
G01 X-51.36974 Y93.79058
G01 X-53.06974 Y93.79058
G01 X-53.11038 Y93.78941
G01 X-53.12788 Y93.78735
G01 X-53.21401 Y93.76088
G01 X-53.27682 Y93.72362
G01 X-53.28647 Y93.71707
G01 X-53.34644 Y93.65710
G01 X-53.39028 Y93.58461
G01 X-53.41675 Y93.49848
G01 X-53.41881 Y93.48098
G01 X-53.41998 Y93.44031
G01 X-53.41998 Y92.56645
G01 X-53.42051 Y92.53894
G01 X-53.42112 Y92.52340
G01 X-53.43941 Y92.38842
G01 X-53.44286 Y92.38362
G01 X-53.47929 Y92.33351
G01 X-53.55155 Y92.24880
G01 X-54.28012 Y91.52025
G01 X-54.29968 Y91.50143
G01 X-54.31111 Y91.49086
G01 X-54.41972 Y91.40811
G01 X-54.42571 Y91.40712
G01 X-54.48690 Y91.39744
G01 X-54.59777 Y91.38868
G01 X-55.47245 Y91.38868
G01 X-55.52764 Y91.39084
G01 X-55.55861 Y91.39327
G01 X-55.73219 Y91.42833
G01 X-55.79338 Y91.44821
G01 X-55.89739 Y91.48929
G01 X-55.90699 Y91.66460
G01 X-55.91301 Y91.72698
G01 X-55.91487 Y91.74031
G01 X-55.92167 Y91.83793
G01 X-55.92167 Y93.44031
G01 X-55.92284 Y93.48098
G01 X-55.92490 Y93.49848
G01 X-55.95137 Y93.58461
G01 X-55.99521 Y93.65710
G01 X-56.05515 Y93.71704
G01 X-56.12764 Y93.76088
G01 X-56.21377 Y93.78735
G01 X-56.23127 Y93.78941
G01 X-56.27194 Y93.79058
G01 X-57.97194 Y93.79058
G01 X-58.01258 Y93.78941
G01 X-58.03008 Y93.78735
G01 X-58.11621 Y93.76088
G01 X-58.17902 Y93.72362
G01 X-58.18867 Y93.71707
G01 X-58.24864 Y93.65710
G01 X-58.29248 Y93.58458
G01 X-58.32182 Y93.48595
G01 X-58.33165 Y93.44031
G01 X-58.35202 Y93.36480
G01 X-58.37191 Y93.30361
G01 X-58.39457 Y93.24199
G01 X-58.58164 Y93.18804
G01 X-58.64283 Y93.17836
G01 X-58.75372 Y93.16957
G01 X-61.50429 Y93.16957
G01 X-61.60111 Y93.17628
G01 X-61.65486 Y93.18369
G01 X-61.88577 Y93.25291
G01 X-61.94696 Y93.28110
G01 X-61.97569 Y93.29490
G01 X-62.01191 Y93.27318
G01 X-62.09636 Y93.22789
G01 X-62.26301 Y93.14907
G01 X-62.32504 Y93.12332
G01 X-62.49166 Y93.06368
G01 X-62.53820 Y93.04953
G01 X-62.70482 Y93.00780
G01 X-62.74104 Y93.00059
G01 X-62.90766 Y92.97587
G01 X-62.93804 Y92.97287
G01 X-63.10469 Y92.96470
G01 X-63.13316 Y92.96470
G01 X-63.29979 Y92.97287
G01 X-63.33017 Y92.97587
G01 X-63.49679 Y93.00059
G01 X-63.53304 Y93.00780
G01 X-63.69966 Y93.04953
G01 X-63.74619 Y93.06368
G01 X-63.91282 Y93.12332
G01 X-63.97484 Y93.14907
G01 X-64.14149 Y93.22789
G01 X-64.22595 Y93.27318
G01 X-64.28625 Y93.30932
G01 X-64.33639 Y93.40305
G01 X-64.37314 Y93.49180
G01 X-64.42150 Y93.65126
G01 X-64.44025 Y93.74547
G01 X-64.45658 Y93.91128
G01 X-64.45658 Y94.00734
G01 X-64.44746 Y94.09992
G01 X-65.40390 Y95.05636
G01 X-65.43621 Y95.09200
G01 X-65.47972 Y95.14503
G01 X-65.53308 Y95.22489
G01 X-65.56544 Y95.28539
G01 X-65.60220 Y95.37414
G01 X-65.62211 Y95.43980
G01 X-65.64086 Y95.53401
G01 X-65.64756 Y95.60231
G01 X-65.64992 Y95.65031
G01 X-65.64992 Y96.92158
G01 X-65.65950 Y96.92669
G01 X-65.73936 Y96.98008
G01 X-65.87791 Y97.09377
G01 X-65.89089 Y97.10444
G01 X-65.95881 Y97.17236
G01 X-66.08317 Y97.32389
G01 X-66.12292 Y97.38336
G01 X-66.12292 Y100.43123
G01 X-66.15668 Y100.45155
G01 X-66.23265 Y100.49928
G01 X-66.30860 Y100.55328
G01 X-66.35729 Y100.59244
G01 X-66.39193 Y100.62216
G01 X-66.44309 Y100.66885
G01 X-66.48304 Y100.70504
G01 X-66.59442 Y100.79343
G01 X-66.62193 Y100.81421
G01 X-66.65170 Y100.83171
G01 X-66.77598 Y100.90077
G01 X-66.82475 Y100.92384
G01 X-66.88830 Y100.95018
G01 X-66.93905 Y100.96834
G01 X-67.07578 Y101.00738
G01 X-67.10918 Y101.01604
G01 X-67.14339 Y101.02084
G01 X-67.28467 Y101.03710
G01 X-67.33852 Y101.03974
G01 X-67.40727 Y101.03974
G01 X-67.46117 Y101.03710
G01 X-67.60242 Y101.02084
G01 X-67.63661 Y101.01604
G01 X-67.67004 Y101.00738
G01 X-67.73453 Y100.98899
G01 X-67.80669 Y100.96836
G01 X-67.85754 Y100.95018
G01 X-67.92109 Y100.92384
G01 X-67.96983 Y100.90080
G01 X-68.09414 Y100.83174
G01 X-68.12388 Y100.81424
G01 X-68.15142 Y100.79346
G01 X-68.26503 Y100.70326
G01 X-68.30478 Y100.67131
G01 X-68.31771 Y100.66166
G01 X-68.35413 Y100.63260
G01 X-68.36026 Y100.62739
G01 X-68.53300 Y100.51556
G01 X-68.54283 Y100.51076
G01 X-68.60399 Y100.47827
G01 X-68.62094 Y100.46852
G01 X-68.64789 Y100.45561
G01 X-68.64872 Y100.45523
G01 X-68.70587 Y100.46125
G01 X-68.80331 Y100.49290
G01 X-68.88238 Y100.53854
G01 X-68.88294 Y100.53943
G01 X-68.88865 Y100.54875
G01 X-68.91982 Y100.60994
G01 X-69.00415 Y100.86247
G01 X-69.01387 Y100.92366
G01 X-69.02266 Y101.03468
G01 X-69.02266 Y101.60933
G01 X-69.02350 Y101.64375
G01 X-69.02520 Y101.67806
G01 X-69.03026 Y101.71205
G01 X-69.04367 Y101.77956
G01 X-69.05203 Y101.81284
G01 X-69.06358 Y101.84520
G01 X-69.08990 Y101.90867
G01 X-69.10463 Y101.93984
G01 X-69.12223 Y101.96920
G01 X-69.16046 Y102.02645
G01 X-69.18098 Y102.05411
G01 X-69.20394 Y102.07951
G01 X-69.22774 Y102.10445
G01 X-69.77735 Y102.65411
G01 X-69.80239 Y102.67794
G01 X-69.82777 Y102.70095
G01 X-69.85545 Y102.72147
G01 X-69.91248 Y102.75957
G01 X-69.94202 Y102.77727
G01 X-69.97300 Y102.79193
G01 X-70.03668 Y102.81830
G01 X-70.06902 Y102.82988
G01 X-70.10234 Y102.83821
G01 X-70.14212 Y102.84697
G01 X-70.16709 Y102.85124
G01 X-70.16980 Y102.85165
G01 X-70.23739 Y102.86536
G01 X-70.24237 Y102.86663
G01 X-70.27252 Y102.87359
G01 X-70.28459 Y102.87611
G01 X-70.49584 Y102.95203
G01 X-70.55703 Y102.98322
G01 X-70.57790 Y102.99897
G01 X-70.58913 Y103.00745
G01 X-70.62101 Y103.06264
G01 X-70.65263 Y103.16008
G01 X-70.66338 Y103.26193
G01 X-70.66338 Y103.32310
G01 X-70.65263 Y103.42497
G01 X-70.62101 Y103.52241
G01 X-70.56980 Y103.61111
G01 X-70.53384 Y103.66061
G01 X-70.46528 Y103.73673
G01 X-70.38248 Y103.79693
G01 X-70.28893 Y103.83859
G01 X-70.23074 Y103.85751
G01 X-70.15593 Y103.87549
G01 X-70.07920 Y103.88154
G01 X-43.43402 Y103.88154
G01 X-43.34090 Y103.87260
G01 X-43.30402 Y103.86546
G01 X-43.22485 Y103.84311
G01 X-43.15053 Y103.80783
G01 X-43.08317 Y103.76061
G01 X-43.03620 Y103.72142
G01 X-42.98868 Y103.67247
G01 X-42.90839 Y103.65650
G01 X-42.84273 Y103.63658
G01 X-42.75398 Y103.59983
G01 X-42.70753 Y103.57499
G01 X-42.68667 Y103.61111
G01 X-42.65071 Y103.66061
G01 X-42.58218 Y103.73673
G01 X-42.49935 Y103.79693
G01 X-42.40580 Y103.83859
G01 X-42.34761 Y103.85751
G01 X-42.27281 Y103.87549
G01 X-42.19610 Y103.88154
G01 X-1.42450 Y103.88154
G01 X-1.34777 Y103.87549
G01 X-1.31716 Y103.87064
G01 X-1.20634 Y103.83938
G01 X-1.10588 Y103.78311
G01 X-1.05638 Y103.74715
G01 X-0.98023 Y103.67857
G01 X-0.92000 Y103.59569
G01 X-0.87832 Y103.50206
G01 X-0.85943 Y103.44387
G01 X-0.84149 Y103.36915
G01 X-0.83547 Y103.29251
G01 X-0.83547 Y79.93691
G01 X-0.83657 Y79.90419
G01 X-0.83745 Y79.89091
G01 X-0.85257 Y79.79873
G01 X-0.88490 Y79.71103
G01 X-0.91145 Y79.65591
G01 X-0.96527 Y79.56881
G01 X-1.03606 Y79.49475
G01 X-1.12069 Y79.43704
G01 X-1.17459 Y79.40806
G01 X-1.26943 Y79.36917
G01 X-1.36341 Y79.35212
G01 X-1.36341 Y79.17874
G01 X-1.32689 Y79.14877
G01 X-1.25897 Y79.08085
G01 X-1.15948 Y78.95962
G01 X-1.10611 Y78.87976
G01 X-1.03220 Y78.74143
G01 X-1.02498 Y78.72401
G01 X-0.99544 Y78.65271
G01 X-0.94990 Y78.50262
G01 X-0.93118 Y78.40841
G01 X-0.91579 Y78.25233
G01 X-0.91579 Y78.15629
G01 X-0.93118 Y78.00021
G01 X-0.94990 Y77.90603
G01 X-0.99544 Y77.75594
G01 X-1.03220 Y77.66719
G01 X-1.10611 Y77.52886
G01 X-1.15948 Y77.44900
G01 X-1.25897 Y77.32777
G01 X-1.32689 Y77.25985
G01 X-1.36341 Y77.22988
G01 X-1.36341 Y76.63874
G01 X-1.32689 Y76.60877
G01 X-1.25897 Y76.54085
G01 X-1.15948 Y76.41962
G01 X-1.10611 Y76.33976
G01 X-1.03220 Y76.20143
G01 X-1.02498 Y76.18401
G01 X-0.99544 Y76.11271
G01 X-0.94990 Y75.96262
G01 X-0.93118 Y75.86841
G01 X-0.91579 Y75.71233
G01 X-0.91579 Y75.61629
G01 X-0.93118 Y75.46021
G01 X-0.94990 Y75.36600
G01 X-0.99544 Y75.21594
G01 X-1.03220 Y75.12719
G01 X-1.10611 Y74.98886
G01 X-1.15948 Y74.90900
G01 X-1.25897 Y74.78777
G01 X-1.32689 Y74.71985
G01 X-1.36341 Y74.68988
G01 X-1.36341 Y74.09874
G01 X-1.32689 Y74.06877
G01 X-1.25897 Y74.00085
G01 X-1.15948 Y73.87962
G01 X-1.10611 Y73.79976
G01 X-1.03220 Y73.66143
G01 X-1.02498 Y73.64401
G01 X-0.99544 Y73.57271
G01 X-0.94990 Y73.42262
G01 X-0.93118 Y73.32841
G01 X-0.91579 Y73.17233
G01 X-0.91579 Y73.07629
G01 X-0.93118 Y72.92021
G01 X-0.94990 Y72.82600
G01 X-0.99544 Y72.67594
G01 X-1.03220 Y72.58719
G01 X-1.10611 Y72.44886
G01 X-1.15948 Y72.36900
G01 X-1.25897 Y72.24777
G01 X-1.32689 Y72.17985
G01 X-1.36341 Y72.14988
G01 X-1.36341 Y71.55874
G01 X-1.32689 Y71.52877
G01 X-1.25897 Y71.46085
G01 X-1.15948 Y71.33962
G01 X-1.10611 Y71.25976
G01 X-1.03220 Y71.12143
G01 X-1.02498 Y71.10401
G01 X-0.99544 Y71.03271
G01 X-0.94990 Y70.88262
G01 X-0.93118 Y70.78841
G01 X-0.91579 Y70.63233
G01 X-0.91579 Y70.53629
G01 X-0.93118 Y70.38021
G01 X-0.94990 Y70.28600
G01 X-0.99544 Y70.13594
G01 X-1.03220 Y70.04719
G01 X-1.10611 Y69.90886
G01 X-1.15948 Y69.82900
G01 X-1.25897 Y69.70777
G01 X-1.32689 Y69.63985
G01 X-1.36341 Y69.60988
G01 X-1.36341 Y69.43269
G01 X-1.29201 Y69.42517
G01 X-1.19458 Y69.39352
G01 X-1.10588 Y69.34231
G01 X-1.05638 Y69.30635
G01 X-1.02498 Y69.27808
G01 X-0.98023 Y69.23777
G01 X-0.92000 Y69.15489
G01 X-0.87832 Y69.06126
G01 X-0.85943 Y69.00307
G01 X-0.84149 Y68.92835
G01 X-0.83547 Y68.85171
G01 X-0.83547 Y62.85503
G01 X-0.83558 Y62.84543
G01 X-0.83565 Y62.84154
G01 X-0.84406 Y62.76026
G01 X-0.86585 Y62.68152
G01 X-0.88704 Y62.62412
G01 X-0.93235 Y62.53224
G01 X-0.99580 Y62.45180
G01 X-1.02498 Y62.42752
G01 X-1.07456 Y62.38630
G01 X-1.12544 Y62.35231
G01 X-1.21612 Y62.30464
G01 X-1.31472 Y62.27682
G01 X-1.41693 Y62.27014
G01 X-1.47807 Y62.27256
G01 X-1.57393 Y62.28647

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )