( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.98000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.91567 Y83.99331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.91567 Y83.99331
G01 X7.91567 Y85.69334
G01 X7.91684 Y85.73398
G01 X7.91890 Y85.75148
G01 X7.94537 Y85.83761
G01 X7.98921 Y85.91010
G01 X8.04915 Y85.97004
G01 X8.12164 Y86.01388
G01 X8.20777 Y86.04035
G01 X8.22527 Y86.04241
G01 X8.26591 Y86.04358
G01 X9.96591 Y86.04358
G01 X10.00658 Y86.04241
G01 X10.02408 Y86.04035
G01 X10.11018 Y86.01388
G01 X10.13004 Y86.00306
G01 X10.18272 Y85.97004
G01 X10.24264 Y85.91010
G01 X10.28648 Y85.83761
G01 X10.31295 Y85.75148
G01 X10.31501 Y85.73398
G01 X10.31618 Y85.69334
G01 X10.31618 Y83.99331
G01 X10.31501 Y83.95267
G01 X10.31295 Y83.93517
G01 X10.28648 Y83.84904
G01 X10.24264 Y83.77655
G01 X10.18270 Y83.71661
G01 X10.11021 Y83.67277
G01 X10.02408 Y83.64630
G01 X10.00658 Y83.64424
G01 X9.96591 Y83.64307
G01 X8.26591 Y83.64307
G01 X8.22527 Y83.64424
G01 X8.20777 Y83.64630
G01 X8.12164 Y83.67277
G01 X8.04915 Y83.71661
G01 X7.98921 Y83.77655
G01 X7.94994 Y83.84048
G01 X7.94537 Y83.84904
G01 X7.91890 Y83.93517
G01 X7.91684 Y83.95267
G01 X7.91567 Y83.99331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.77071 Y87.89133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.77071 Y87.89133
G01 X11.77297 Y87.92582
G01 X11.78704 Y88.08086
G01 X11.78724 Y88.08200
G01 X11.80243 Y88.14926
G01 X11.83461 Y88.26496
G01 X11.84739 Y88.29953
G01 X11.87439 Y88.36285
G01 X11.91130 Y88.43885
G01 X11.94823 Y88.50120
G01 X11.98618 Y88.55863
G01 X12.01503 Y88.59795
G01 X12.08600 Y88.67961
G01 X12.13375 Y88.72935
G01 X12.14322 Y88.73829
G01 X12.25557 Y88.82810
G01 X12.29275 Y88.85586
G01 X12.31257 Y88.86694
G01 X12.45067 Y88.94121
G01 X12.46022 Y88.94624
G01 X12.51488 Y88.96646
G01 X12.64040 Y89.00702
G01 X12.66474 Y89.01271
G01 X12.73243 Y89.02508
G01 X12.82791 Y89.03775
G01 X12.88846 Y89.04073
G01 X12.95737 Y89.04073
G01 X13.01802 Y89.03775
G01 X13.11343 Y89.02511
G01 X13.18114 Y89.01271
G01 X13.20553 Y89.00699
G01 X13.33098 Y88.96646
G01 X13.38564 Y88.94624
G01 X13.39514 Y88.94123
G01 X13.53326 Y88.86694
G01 X13.54779 Y88.85891
G01 X13.55308 Y88.85586
G01 X13.59031 Y88.82808
G01 X13.70263 Y88.73829
G01 X13.71213 Y88.72932
G01 X13.75983 Y88.67961
G01 X13.83082 Y88.59795
G01 X13.85965 Y88.55866
G01 X13.89758 Y88.50126
G01 X13.93458 Y88.43880
G01 X13.97144 Y88.36290
G01 X13.99846 Y88.29953
G01 X14.01124 Y88.26496
G01 X14.04342 Y88.14926
G01 X14.05861 Y88.08195
G01 X14.05882 Y88.08086
G01 X14.07286 Y87.92577
G01 X14.07515 Y87.89133
G01 X14.07286 Y87.85686
G01 X14.05882 Y87.70179
G01 X14.05861 Y87.70070
G01 X14.04342 Y87.63339
G01 X14.01124 Y87.51769
G01 X13.99846 Y87.48312
G01 X13.97144 Y87.41975
G01 X13.93458 Y87.34385
G01 X13.89758 Y87.28140
G01 X13.85965 Y87.22399
G01 X13.83082 Y87.18470
G01 X13.75983 Y87.10304
G01 X13.71213 Y87.05333
G01 X13.70263 Y87.04436
G01 X13.59031 Y86.95457
G01 X13.55310 Y86.92679
G01 X13.53326 Y86.91571
G01 X13.39514 Y86.84142
G01 X13.38564 Y86.83641
G01 X13.33098 Y86.81619
G01 X13.27726 Y86.79885
G01 X13.18381 Y86.76113
G01 X13.17893 Y86.75874
G01 X13.12453 Y86.73484
G01 X13.11599 Y86.73149
G01 X12.96601 Y86.65424
G01 X12.93474 Y86.63425
G01 X12.88092 Y86.66562
G01 X12.76029 Y86.72417
G01 X12.73027 Y86.73588
G01 X12.70146 Y86.74777
G01 X12.66309 Y86.76456
G01 X12.59674 Y86.78975
G01 X12.51488 Y86.81619
G01 X12.46019 Y86.83641
G01 X12.45067 Y86.84144
G01 X12.31257 Y86.91571
G01 X12.29275 Y86.92679
G01 X12.25557 Y86.95455
G01 X12.14322 Y87.04436
G01 X12.13375 Y87.05330
G01 X12.08600 Y87.10304
G01 X12.01503 Y87.18467
G01 X11.98618 Y87.22402
G01 X11.94823 Y87.28145
G01 X11.91127 Y87.34385
G01 X11.87439 Y87.41980
G01 X11.84739 Y87.48312
G01 X11.83461 Y87.51772
G01 X11.80302 Y87.63131
G01 X11.80243 Y87.63339
G01 X11.78724 Y87.70062
G01 X11.78706 Y87.70177
G01 X11.77299 Y87.85681
G01 X11.77071 Y87.89133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.52341 Y83.70408 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.52341 Y83.70408
G01 X12.46169 Y83.76156
G01 X12.45186 Y83.77058
G01 X12.40505 Y83.81275
G01 X12.33939 Y83.86548
G01 X12.31475 Y83.88300
G01 X12.28353 Y83.90655
G01 X12.22316 Y83.95481
G01 X12.17124 Y83.99634
G01 X12.16171 Y84.00533
G01 X12.11401 Y84.05504
G01 X12.04305 Y84.13670
G01 X12.01419 Y84.17602
G01 X11.97627 Y84.23340
G01 X11.93926 Y84.29585
G01 X11.90241 Y84.37175
G01 X11.87538 Y84.43512
G01 X11.86260 Y84.46972
G01 X11.83106 Y84.58313
G01 X11.83042 Y84.58539
G01 X11.81523 Y84.65270
G01 X11.81506 Y84.65379
G01 X11.80098 Y84.80886
G01 X11.79870 Y84.84333
G01 X11.80098 Y84.87777
G01 X11.81503 Y85.03286
G01 X11.81523 Y85.03395
G01 X11.83042 Y85.10126
G01 X11.86260 Y85.21693
G01 X11.87279 Y85.24452
G01 X11.87538 Y85.25150
G01 X11.90241 Y85.31490
G01 X11.93926 Y85.39080
G01 X11.97627 Y85.45326
G01 X11.98397 Y85.46596
G01 X12.01419 Y85.51066
G01 X12.04302 Y85.54995
G01 X12.11401 Y85.63161
G01 X12.16171 Y85.68132
G01 X12.17121 Y85.69031
G01 X12.28353 Y85.78008
G01 X12.32074 Y85.80786
G01 X12.34058 Y85.81894
G01 X12.47871 Y85.89323
G01 X12.48821 Y85.89824
G01 X12.54287 Y85.91846
G01 X12.59659 Y85.93580
G01 X12.69003 Y85.97352
G01 X12.69491 Y85.97591
G01 X12.74932 Y85.99981
G01 X12.75785 Y86.00317
G01 X12.90784 Y86.08041
G01 X12.93911 Y86.10042
G01 X12.99293 Y86.06905
G01 X13.11348 Y86.01051
G01 X13.14358 Y85.99880
G01 X13.17230 Y85.98691
G01 X13.21076 Y85.97009
G01 X13.27710 Y85.94490
G01 X13.35897 Y85.91846
G01 X13.41366 Y85.89824
G01 X13.42318 Y85.89321
G01 X13.56128 Y85.81894
G01 X13.58109 Y85.80786
G01 X13.61828 Y85.78010
G01 X13.73062 Y85.69029
G01 X13.74010 Y85.68135
G01 X13.78785 Y85.63161
G01 X13.85882 Y85.54995
G01 X13.88767 Y85.51063
G01 X13.92562 Y85.45320
G01 X13.96260 Y85.39080
G01 X13.99946 Y85.31485
G01 X14.02646 Y85.25158
G01 X14.03923 Y85.21696
G01 X14.07141 Y85.10131
G01 X14.08663 Y85.03395
G01 X14.08681 Y85.03286
G01 X14.10088 Y84.87777
G01 X14.10314 Y84.84333
G01 X14.10088 Y84.80886
G01 X14.08681 Y84.65379
G01 X14.08663 Y84.65270
G01 X14.07141 Y84.58534
G01 X14.03923 Y84.46969
G01 X14.02646 Y84.43507
G01 X13.99946 Y84.37180
G01 X13.96260 Y84.29585
G01 X13.92562 Y84.23345
G01 X13.88767 Y84.17602
G01 X13.85882 Y84.13670
G01 X13.78785 Y84.05504
G01 X13.74010 Y84.00530
G01 X13.73062 Y83.99634
G01 X13.61828 Y83.90655
G01 X13.56217 Y83.86606
G01 X13.56174 Y83.86578
G01 X13.47510 Y83.79972
G01 X13.43758 Y83.76647
G01 X13.43037 Y83.76017
G01 X13.37573 Y83.71295
G01 X13.26136 Y83.59410
G01 X13.26049 Y83.59319
G01 X13.24924 Y83.58978
G01 X13.15503 Y83.57104
G01 X12.99897 Y83.55567
G01 X12.90291 Y83.55567
G01 X12.74683 Y83.57104
G01 X12.65262 Y83.58978
G01 X12.61607 Y83.60088
G01 X12.52341 Y83.70408
G01 X12.61833 Y83.59834
G01 X12.62262 Y83.53855
G01 X12.62062 Y83.47739
G01 X12.61622 Y83.44490
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.26136 Y83.59410 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.26136 Y83.59410
G01 X13.25574 Y83.53893
G01 X13.25574 Y83.47777
G01 X13.25971 Y83.44015
G01 X13.26217 Y83.43733
G01 X13.35333 Y83.33426
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.15109 Y82.58587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.15109 Y82.58587
G01 X14.16534 Y82.58440
G01 X14.22653 Y82.58440
G01 X14.24073 Y82.58587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.19592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.19592 Y82.41077
G01 X14.21241 Y82.49362
G01 X14.24027 Y82.58552
G01 X14.24073 Y82.58587
G01 X14.24076 Y82.58590
G01 X14.29768 Y82.63162
G01 X14.36814 Y82.69316
G01 X14.44660 Y82.77150
G01 X14.48081 Y82.81077
G01 X14.48787 Y82.81877
G01 X14.52805 Y82.86357
G01 X14.56107 Y82.90322
G01 X14.59128 Y82.94231
G01 X14.62884 Y82.98374
G01 X14.67751 Y83.03241
G01 X14.71894 Y83.06995
G01 X14.79890 Y83.13172
G01 X14.85546 Y83.17114
G01 X14.86448 Y83.17681
G01 X14.99409 Y83.24445
G01 X15.02508 Y83.25966
G01 X15.05775 Y83.27081
G01 X15.19722 Y83.31463
G01 X15.20763 Y83.31701
G01 X15.27542 Y83.32910
G01 X15.37565 Y83.34198
G01 X15.43146 Y83.34473
G01 X15.50037 Y83.34473
G01 X15.55617 Y83.34198
G01 X15.65642 Y83.32910
G01 X15.72422 Y83.31701
G01 X15.73463 Y83.31463
G01 X15.87408 Y83.27081
G01 X15.90677 Y83.25966
G01 X15.93775 Y83.24445
G01 X16.06735 Y83.17681
G01 X16.07639 Y83.17114
G01 X16.13295 Y83.13172
G01 X16.21294 Y83.06990
G01 X16.25592 Y83.03431
G01 X16.27166 Y83.02227
G01 X16.30580 Y82.99448
G01 X16.31080 Y82.99014
G01 X16.44461 Y82.89708
G01 X16.48650 Y82.87378
G01 X16.52579 Y82.85072
G01 X16.54677 Y82.83777
G01 X16.59417 Y82.81293
G01 X16.59417 Y82.81287
G01 X16.63717 Y82.73243
G01 X16.67395 Y82.64371
G01 X16.71947 Y82.49362
G01 X16.73592 Y82.41077
G01 X16.73592 Y81.17973
G01 X16.75241 Y81.09700
G01 X16.79793 Y80.94691
G01 X16.83468 Y80.85819
G01 X16.90862 Y80.71986
G01 X16.96198 Y80.64001
G01 X17.06148 Y80.51877
G01 X17.12940 Y80.45085
G01 X17.16546 Y80.42126
G01 X17.16539 Y80.38905
G01 X17.14032 Y80.40831
G01 X17.01888 Y80.52975
G01 X16.99813 Y80.55680
G01 X16.92267 Y80.63526
G01 X16.89252 Y80.66033
G01 X16.88904 Y80.66320
G01 X16.81705 Y80.71290
G01 X16.73732 Y80.74902
G01 X16.65249 Y80.77038
G01 X16.59511 Y80.77948
G01 X16.59170 Y80.77780
G01 X16.52371 Y80.74105
G01 X16.44382 Y80.69421
G01 X16.34667 Y80.62738
G01 X16.31202 Y80.59952
G01 X16.29783 Y80.58839
G01 X16.25592 Y80.55634
G01 X16.21299 Y80.52075
G01 X16.13295 Y80.45893
G01 X16.07639 Y80.41951
G01 X16.06737 Y80.41384
G01 X15.93775 Y80.34620
G01 X15.90677 Y80.33099
G01 X15.87408 Y80.31984
G01 X15.73463 Y80.27602
G01 X15.72422 Y80.27364
G01 X15.65642 Y80.26155
G01 X15.55617 Y80.24867
G01 X15.50037 Y80.24593
G01 X15.43146 Y80.24593
G01 X15.37565 Y80.24867
G01 X15.27542 Y80.26155
G01 X15.20763 Y80.27364
G01 X15.19722 Y80.27602
G01 X15.05775 Y80.31984
G01 X15.02508 Y80.33099
G01 X14.99409 Y80.34620
G01 X14.86448 Y80.41387
G01 X14.85546 Y80.41951
G01 X14.79890 Y80.45893
G01 X14.71891 Y80.52070
G01 X14.67751 Y80.55824
G01 X14.62884 Y80.60691
G01 X14.59130 Y80.64831
G01 X14.56113 Y80.68740
G01 X14.52805 Y80.72710
G01 X14.48780 Y80.77198
G01 X14.48081 Y80.77988
G01 X14.44650 Y80.81925
G01 X14.36814 Y80.89749
G01 X14.29768 Y80.95903
G01 X14.24076 Y81.00475
G01 X14.24073 Y81.00475
G01 X14.22653 Y81.00625
G01 X14.16534 Y81.00625
G01 X14.15109 Y81.00475
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.19592 Y81.17973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.19592 Y81.17973
G01 X14.21241 Y81.09700
G01 X14.24027 Y81.00513
G01 X14.24073 Y81.00475
G01 X14.29768 Y80.95903
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.59511 Y80.77948 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.59511 Y80.77948
G01 X16.63717 Y80.85819
G01 X16.67395 Y80.94691
G01 X16.71947 Y81.09700
G01 X16.73592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.73592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.73592 Y82.41077
G01 X16.75241 Y82.49362
G01 X16.79793 Y82.64371
G01 X16.83468 Y82.73243
G01 X16.89625 Y82.84762
G01 X16.83399 Y82.85090
G01 X16.77496 Y82.86025
G01 X16.74652 Y82.84480
G01 X16.64819 Y82.81569
G01 X16.59658 Y82.81163
G01 X16.59417 Y82.81287
G01 X16.54677 Y82.83777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.75347 Y83.45796 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.75347 Y83.45796
G01 X17.80181 Y83.46759
G01 X17.95792 Y83.48295
G01 X18.05396 Y83.48295
G01 X18.13092 Y83.47538
G01 X18.04601 Y83.56030
G01 X17.99896 Y83.55567
G01 X17.90290 Y83.55567
G01 X17.85586 Y83.56030
G01 X17.75347 Y83.45796
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.63725 Y84.84333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.63725 Y84.84333
G01 X16.64601 Y84.72636
G01 X16.66793 Y84.74828
G01 X16.66331 Y84.79529
G01 X16.66331 Y84.89133
G01 X16.66793 Y84.93840
G01 X16.64601 Y84.96032
G01 X16.63725 Y84.84333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.60087 Y86.38132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.60087 Y86.38132
G01 X17.82787 Y86.60830
G01 X17.87491 Y86.60367
G01 X17.97097 Y86.60367
G01 X18.01802 Y86.60830
G01 X18.27298 Y86.35333
G01 X18.04598 Y86.12633
G01 X17.99896 Y86.13095
G01 X17.90290 Y86.13095
G01 X17.85586 Y86.12633
G01 X17.60087 Y86.38132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.20595 Y87.79625 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.20595 Y87.79625
G01 X19.22784 Y87.77436
G01 X19.23661 Y87.89133
G01 X19.22784 Y88.00832
G01 X19.20595 Y87.98642
G01 X19.21057 Y87.93933
G01 X19.21057 Y87.84329
G01 X19.20595 Y87.79625
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.60925 Y87.89133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.60925 Y87.89133
G01 X16.61802 Y88.00829
G01 X16.63991 Y87.98637
G01 X16.63529 Y87.93933
G01 X16.63529 Y87.84329
G01 X16.63991 Y87.79628
G01 X16.61802 Y87.77436
G01 X16.60925 Y87.89133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.27054 Y91.93186 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.27054 Y91.93186
G01 X18.18195 Y92.11136
G01 X18.18190 Y92.48296
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.01829 Y92.19937 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.01829 Y92.19937
G01 X18.02068 Y92.20023
G01 X18.05167 Y92.19198
G01 X18.10885 Y92.17021
G01 X18.16754 Y92.14052
G01 X18.27054 Y91.93186
G01 X18.28875 Y91.87067
G01 X18.31842 Y91.70747
G01 X18.32015 Y91.68136
G01 X18.32167 Y91.63516
G01 X18.32167 Y91.59970
G01 X18.32251 Y91.56526
G01 X18.32421 Y91.53102
G01 X18.32924 Y91.49698
G01 X18.34268 Y91.42955
G01 X18.35103 Y91.39622
G01 X18.36259 Y91.36389
G01 X18.38893 Y91.30028
G01 X18.38985 Y91.29835
G01 X18.39079 Y91.29759
G01 X18.44545 Y91.25271
G01 X18.49774 Y91.21387
G01 X18.52398 Y91.19635
G01 X18.55629 Y91.17316
G01 X18.57046 Y91.16226
G01 X18.57844 Y91.15624
G01 X18.69777 Y91.06775
G01 X18.73630 Y91.03615
G01 X18.85263 Y90.93069
G01 X18.88629 Y90.89703
G01 X18.99175 Y90.78070
G01 X19.02335 Y90.74217
G01 X19.11778 Y90.61482
G01 X19.14931 Y90.56757
G01 X19.23244 Y90.42889
G01 X19.26510 Y90.36767
G01 X19.26640 Y90.36496
G01 X22.04640 Y87.58493
G01 X22.11862 Y87.50032
G01 X22.15501 Y87.45020
G01 X22.27406 Y87.21182
G01 X22.28679 Y87.17261
G01 X22.33878 Y87.15556
G01 X22.41026 Y87.12999
G01 X22.45095 Y87.11431
G01 X22.81750 Y86.96250
G01 X22.84107 Y86.95338
G01 X22.90967 Y86.92882
G01 X22.94996 Y86.91657
G01 X23.01856 Y86.89940
G01 X23.05356 Y86.89242
G01 X23.12217 Y86.88223
G01 X23.15417 Y86.87908
G01 X23.22281 Y86.87571
G01 X23.23835 Y86.87533
G01 X42.38995 Y86.87533
G01 X42.40547 Y86.87494
G01 X42.47407 Y86.87157
G01 X42.50608 Y86.86842
G01 X42.57468 Y86.85823
G01 X42.60969 Y86.85125
G01 X42.67115 Y86.83585
G01 X42.67694 Y86.83156
G01 X42.70661 Y86.80725
G01 X42.75751 Y86.76110
G01 X42.77092 Y86.74833
G01 X46.64691 Y82.87234
G01 X46.65969 Y82.85892
G01 X46.70584 Y82.80802
G01 X46.73015 Y82.77836
G01 X46.77148 Y82.72265
G01 X46.78296 Y82.70637
G01 X46.78666 Y82.68514
G01 X46.79682 Y82.61653
G01 X46.80058 Y82.57848
G01 X46.80396 Y82.50985
G01 X46.80442 Y82.49131
G01 X46.80442 Y69.97785
G01 X46.80488 Y69.95933
G01 X46.80825 Y69.89073
G01 X46.81201 Y69.85268
G01 X46.81730 Y69.81694
G01 X46.83472 Y69.78786
G01 X46.85575 Y69.75639
G01 X46.89705 Y69.70066
G01 X46.91880 Y69.67417
G01 X46.96495 Y69.62326
G01 X46.97633 Y69.61130
G01 X49.40827 Y67.17935
G01 X49.42024 Y67.16795
G01 X49.47114 Y67.12180
G01 X49.49766 Y67.10005
G01 X49.54587 Y67.06429
G01 X49.55509 Y67.06200
G01 X49.59009 Y67.05502
G01 X49.65869 Y67.04483
G01 X49.69070 Y67.04168
G01 X49.75933 Y67.03831
G01 X49.77485 Y67.03793
G01 X57.32134 Y67.03793
G01 X57.33686 Y67.03831
G01 X57.40546 Y67.04168
G01 X57.43747 Y67.04483
G01 X57.50607 Y67.05502
G01 X57.54108 Y67.06200
G01 X57.60968 Y67.07918
G01 X57.64997 Y67.09142
G01 X57.71857 Y67.11598
G01 X57.74217 Y67.12510
G01 X58.33320 Y67.36990
G01 X66.84664 Y67.36990
G01 X66.85513 Y67.36419
G01 X66.91632 Y67.33302
G01 X67.16902 Y67.24864
G01 X67.23021 Y67.23897
G01 X67.34108 Y67.23018
G01 X71.22540 Y67.23018
G01 X71.25291 Y67.23071
G01 X71.26845 Y67.23132
G01 X71.40343 Y67.24961
G01 X71.40823 Y67.25309
G01 X71.45835 Y67.28949
G01 X71.54305 Y67.36175
G01 X73.20909 Y69.02779
G01 X73.22847 Y69.04795
G01 X73.23901 Y69.05938
G01 X73.32123 Y69.16744
G01 X73.32217 Y69.17320
G01 X73.33187 Y69.23436
G01 X73.34066 Y69.34546
G01 X73.34066 Y69.87480
G01 X73.34183 Y69.87935
G01 X73.35900 Y69.94793
G01 X73.37173 Y70.01173
G01 X73.38191 Y70.08036
G01 X73.38783 Y70.14031
G01 X73.39121 Y70.20891
G01 X73.39192 Y70.23833
G01 X73.39192 Y71.89885
G01 X73.39121 Y71.92824
G01 X73.38783 Y71.99687
G01 X73.38191 Y72.05681
G01 X73.37173 Y72.12544
G01 X73.36169 Y72.17807
G01 X73.36017 Y72.18000
G01 X73.35458 Y72.18689
G01 X73.31023 Y72.24094
G01 X73.26911 Y72.28635
G01 X73.24866 Y72.30680
G01 X73.22138 Y72.33593
G01 X73.20889 Y72.35021
G01 X73.20200 Y72.35793
G01 X73.09692 Y72.47386
G01 X73.05819 Y72.52110
G01 X72.95783 Y72.65641
G01 X72.91966 Y72.71361
G01 X72.83134 Y72.86095
G01 X72.79228 Y72.93413
G01 X72.77092 Y72.97934
G01 X72.77092 Y73.55620
G01 X72.75514 Y73.60832
G01 X72.71839 Y73.69707
G01 X72.63983 Y73.84403
G01 X72.58646 Y73.92389
G01 X72.48075 Y74.05269
G01 X72.41283 Y74.12064
G01 X72.28402 Y74.22633
G01 X72.20417 Y74.27969
G01 X72.05720 Y74.35826
G01 X71.96845 Y74.39501
G01 X71.91633 Y74.41083
G01 X71.08547 Y74.41083
G01 X71.03340 Y74.42661
G01 X70.94468 Y74.46336
G01 X70.79772 Y74.54192
G01 X70.71786 Y74.59529
G01 X70.64410 Y74.65582
G01 X70.58906 Y74.70100
G01 X70.52111 Y74.76892
G01 X70.41540 Y74.89773
G01 X70.36206 Y74.97758
G01 X70.28349 Y75.12455
G01 X70.24674 Y75.21330
G01 X70.23092 Y75.26534
G01 X70.23092 Y76.09620
G01 X70.21512 Y76.14832
G01 X70.21486 Y76.14901
G01 X70.15761 Y76.19214
G01 X70.13028 Y76.21134
G01 X69.99513 Y76.32805
G01 X69.97813 Y76.34634
G01 X69.94517 Y76.37956
G01 X69.94443 Y76.38022
G01 X69.88769 Y76.44050
G01 X69.83371 Y76.50491
G01 X69.81093 Y76.53085
G01 X69.78499 Y76.55363
G01 X69.66691 Y76.65254
G01 X69.65662 Y76.65985
G01 X69.59853 Y76.69704
G01 X69.50575 Y76.75017
G01 X69.45167 Y76.77575
G01 X69.38812 Y76.80207
G01 X69.33178 Y76.82226
G01 X69.22863 Y76.85025
G01 X69.16127 Y76.86503
G01 X69.14882 Y76.86714
G01 X68.99538 Y76.88073
G01 X68.96094 Y76.88294
G01 X68.92647 Y76.88073
G01 X68.77301 Y76.86714
G01 X68.76056 Y76.86503
G01 X68.69320 Y76.85025
G01 X68.59005 Y76.82226
G01 X68.53366 Y76.80207
G01 X68.47019 Y76.77578
G01 X68.41601 Y76.75017
G01 X68.32553 Y76.69831
G01 X68.32378 Y76.69617
G01 X68.31751 Y76.68843
G01 X68.28012 Y76.64167
G01 X68.27458 Y76.63481
G01 X68.23023 Y76.58073
G01 X68.18909 Y76.53534
G01 X68.16864 Y76.51487
G01 X68.14138 Y76.48573
G01 X68.12889 Y76.47146
G01 X68.12200 Y76.46374
G01 X68.01687 Y76.34779
G01 X67.97814 Y76.30057
G01 X67.87781 Y76.16524
G01 X67.83966 Y76.10806
G01 X67.79495 Y76.03351
G01 X67.79221 Y76.02892
G01 X67.75134 Y75.96074
G01 X67.71228 Y75.88751
G01 X67.69092 Y75.84235
G01 X67.69092 Y75.26534
G01 X67.67514 Y75.21330
G01 X67.63839 Y75.12455
G01 X67.55980 Y74.97758
G01 X67.50646 Y74.89773
G01 X67.44593 Y74.82397
G01 X67.40075 Y74.76892
G01 X67.33283 Y74.70100
G01 X67.20402 Y74.59529
G01 X67.12417 Y74.54192
G01 X66.97718 Y74.46336
G01 X66.88845 Y74.42661
G01 X66.83633 Y74.41083
G01 X66.00547 Y74.41083
G01 X65.95343 Y74.42661
G01 X65.86468 Y74.46336
G01 X65.71772 Y74.54192
G01 X65.63786 Y74.59529
G01 X65.56410 Y74.65582
G01 X65.50906 Y74.70100
G01 X65.44111 Y74.76892
G01 X65.33542 Y74.89773
G01 X65.28206 Y74.97758
G01 X65.20349 Y75.12455
G01 X65.16674 Y75.21330
G01 X65.15092 Y75.26534
G01 X65.15092 Y75.84235
G01 X65.12955 Y75.88751
G01 X65.09051 Y75.96069
G01 X65.04962 Y76.02892
G01 X65.01510 Y76.09341
G01 X65.00746 Y76.10961
G01 X64.99816 Y76.12851
G01 X64.97614 Y76.17171
G01 X64.96694 Y76.19043
G01 X64.95028 Y76.22571
G01 X64.89714 Y76.31843
G01 X64.85996 Y76.37651
G01 X64.85264 Y76.38680
G01 X64.83466 Y76.40829
G01 X64.75374 Y76.50491
G01 X64.73093 Y76.53087
G01 X64.70977 Y76.54964
G01 X64.70504 Y76.55365
G01 X64.62994 Y76.62803
G01 X64.58904 Y76.67496
G01 X64.57792 Y76.68777
G01 X64.55574 Y76.82787
G01 X64.55437 Y76.85111
G01 X64.55318 Y76.89219
G01 X64.55318 Y78.52337
G01 X64.56197 Y78.63432
G01 X64.57164 Y78.69548
G01 X64.57545 Y78.71745
G01 X64.64274 Y78.79754
G01 X64.64949 Y78.80453
G01 X64.65744 Y78.81283
G01 X64.67182 Y78.82810
G01 X64.68013 Y78.83711
G01 X64.68985 Y78.84804
G01 X64.76082 Y78.92970
G01 X64.78968 Y78.96902
G01 X64.82762 Y79.02645
G01 X64.86458 Y79.08885
G01 X64.90146 Y79.16480
G01 X64.92846 Y79.22812
G01 X64.94124 Y79.26272
G01 X64.97342 Y79.37839
G01 X64.98861 Y79.44562
G01 X64.98881 Y79.44679
G01 X65.00286 Y79.60181
G01 X65.00514 Y79.63635
G01 X65.00288 Y79.67082
G01 X64.98879 Y79.82586
G01 X64.98861 Y79.82700
G01 X64.97342 Y79.89426
G01 X64.94124 Y80.00998
G01 X64.92846 Y80.04453
G01 X64.90146 Y80.10788
G01 X64.86458 Y80.18380
G01 X64.82762 Y80.24620
G01 X64.78968 Y80.30363
G01 X64.76082 Y80.34298
G01 X64.71345 Y80.39746
G01 X64.67748 Y80.41445
G01 X64.61444 Y80.44064
G01 X64.45762 Y80.49675
G01 X64.40954 Y80.51138
G01 X64.25272 Y80.55065
G01 X64.21454 Y80.55827
G01 X64.05770 Y80.58154
G01 X64.02516 Y80.58474
G01 X63.86834 Y80.59246
G01 X63.83753 Y80.59246
G01 X63.68071 Y80.58474
G01 X63.64815 Y80.58154
G01 X63.49130 Y80.55827
G01 X63.45313 Y80.55065
G01 X63.29631 Y80.51138
G01 X63.24823 Y80.49675
G01 X63.09141 Y80.44064
G01 X63.02836 Y80.41445
G01 X62.99240 Y80.39746
G01 X62.94508 Y80.34303
G01 X62.91617 Y80.30363
G01 X62.87822 Y80.24620
G01 X62.84127 Y80.18380
G01 X62.80439 Y80.10788
G01 X62.78534 Y80.06503
G01 X62.77739 Y80.04453
G01 X62.76461 Y80.00993
G01 X62.73243 Y79.89426
G01 X62.71724 Y79.82700
G01 X62.71706 Y79.82586
G01 X62.70296 Y79.67082
G01 X62.70070 Y79.63635
G01 X62.70299 Y79.60181
G01 X62.71706 Y79.44679
G01 X62.71724 Y79.44562
G01 X62.73162 Y79.38139
G01 X62.73243 Y79.37839
G01 X62.76461 Y79.26272
G01 X62.77739 Y79.22812
G01 X62.80439 Y79.16480
G01 X62.84127 Y79.08885
G01 X62.87822 Y79.02645
G01 X62.91617 Y78.96902
G01 X62.94500 Y78.92972
G01 X63.01599 Y78.84804
G01 X63.02140 Y78.84189
G01 X63.03410 Y78.82802
G01 X63.06293 Y78.79734
G01 X63.10919 Y78.74303
G01 X63.12930 Y78.71690
G01 X63.13565 Y78.68779
G01 X63.15204 Y78.55507
G01 X63.15237 Y78.54364
G01 X63.15267 Y78.52337
G01 X63.15267 Y76.84200
G01 X63.14388 Y76.73112
G01 X63.13421 Y76.66994
G01 X63.12918 Y76.64167
G01 X63.06276 Y76.56366
G01 X63.05727 Y76.55807
G01 X63.04747 Y76.54814
G01 X63.00812 Y76.50491
G01 X62.90921 Y76.38680
G01 X62.90190 Y76.37651
G01 X62.86471 Y76.31843
G01 X62.81155 Y76.22566
G01 X62.79484 Y76.19033
G01 X62.78569 Y76.17171
G01 X62.76377 Y76.12869
G01 X62.75443 Y76.10964
G01 X62.74683 Y76.09358
G01 X62.71221 Y76.02892
G01 X62.67134 Y75.96074
G01 X62.63228 Y75.88751
G01 X62.61092 Y75.84235
G01 X62.61092 Y75.26534
G01 X62.59514 Y75.21330
G01 X62.55839 Y75.12455
G01 X62.47983 Y74.97758
G01 X62.42646 Y74.89773
G01 X62.36593 Y74.82397
G01 X62.32075 Y74.76892
G01 X62.25283 Y74.70100
G01 X62.12402 Y74.59529
G01 X62.04417 Y74.54192
G01 X61.89720 Y74.46336
G01 X61.80845 Y74.42661
G01 X61.75633 Y74.41083
G01 X60.92547 Y74.41083
G01 X60.87343 Y74.42661
G01 X60.78468 Y74.46336
G01 X60.63772 Y74.54192
G01 X60.55786 Y74.59529
G01 X60.48410 Y74.65582
G01 X60.42906 Y74.70100
G01 X60.36111 Y74.76892
G01 X60.25542 Y74.89773
G01 X60.20206 Y74.97758
G01 X60.12349 Y75.12455
G01 X60.08674 Y75.21330
G01 X60.07092 Y75.26534
G01 X60.07092 Y75.84235
G01 X60.04955 Y75.88751
G01 X60.01051 Y75.96069
G01 X59.96957 Y76.02899
G01 X59.92222 Y76.10801
G01 X59.88402 Y76.16524
G01 X59.78369 Y76.30054
G01 X59.74493 Y76.34779
G01 X59.70734 Y76.38929
G01 X59.68788 Y76.41182
G01 X59.64435 Y76.46486
G01 X59.63663 Y76.47446
G01 X59.60701 Y76.51210
G01 X59.59906 Y76.52198
G01 X59.56274 Y76.56623
G01 X59.52306 Y76.61980
G01 X59.49644 Y76.65962
G01 X59.48285 Y76.67928
G01 X59.48242 Y76.67989
G01 X59.47564 Y76.74895
G01 X59.47226 Y76.81756
G01 X59.47142 Y76.85183
G01 X59.47142 Y78.49330
G01 X59.47226 Y78.52756
G01 X59.47564 Y78.59620
G01 X59.48252 Y78.66599
G01 X59.49050 Y78.71979
G01 X59.49911 Y78.73264
G01 X59.54173 Y78.79018
G01 X59.55524 Y78.80666
G01 X59.58458 Y78.84506
G01 X59.59520 Y78.86008
G01 X59.62362 Y78.89731
G01 X59.66716 Y78.95037
G01 X59.68832 Y78.97488
G01 X59.69436 Y78.98156
G01 X59.73619 Y79.03257
G01 X59.79718 Y79.11481
G01 X59.82146 Y79.16480
G01 X59.84846 Y79.22812
G01 X59.86124 Y79.26272
G01 X59.89342 Y79.37839
G01 X59.90861 Y79.44562
G01 X59.90881 Y79.44679
G01 X59.92286 Y79.60181
G01 X59.92514 Y79.63635
G01 X59.92288 Y79.67082
G01 X59.90879 Y79.82586
G01 X59.90861 Y79.82700
G01 X59.89342 Y79.89426
G01 X59.86124 Y80.00998
G01 X59.84846 Y80.04453
G01 X59.82146 Y80.10788
G01 X59.78458 Y80.18380
G01 X59.74762 Y80.24620
G01 X59.70968 Y80.30363
G01 X59.68082 Y80.34298
G01 X59.60985 Y80.42461
G01 X59.56210 Y80.47435
G01 X59.55263 Y80.48329
G01 X59.44028 Y80.57310
G01 X59.40310 Y80.60086
G01 X59.38329 Y80.61194
G01 X59.24519 Y80.68621
G01 X59.23564 Y80.69124
G01 X59.18098 Y80.71146
G01 X59.05552 Y80.75199
G01 X59.03112 Y80.75771
G01 X58.96342 Y80.77008
G01 X58.86795 Y80.78275
G01 X58.80739 Y80.78573
G01 X58.73848 Y80.78573
G01 X58.67790 Y80.78275
G01 X58.58242 Y80.77008
G01 X58.51473 Y80.75771
G01 X58.49040 Y80.75202
G01 X58.36487 Y80.71146
G01 X58.31021 Y80.69124
G01 X58.30066 Y80.68621
G01 X58.16256 Y80.61194
G01 X58.14275 Y80.60086
G01 X58.10556 Y80.57310
G01 X57.99322 Y80.48329
G01 X57.98375 Y80.47435
G01 X57.93599 Y80.42461
G01 X57.86508 Y80.34303
G01 X57.83617 Y80.30363
G01 X57.79822 Y80.24620
G01 X57.76127 Y80.18380
G01 X57.73343 Y80.12647
G01 X57.72411 Y80.10800
G01 X57.69182 Y80.04623
G01 X57.68154 Y80.02721
G01 X57.65088 Y79.97255
G01 X57.60988 Y79.90719
G01 X57.55946 Y79.83467
G01 X57.49167 Y79.74910
G01 X57.49165 Y79.74908
G01 X57.49137 Y79.74869
G01 X57.47524 Y79.74336
G01 X57.41545 Y79.73028
G01 X57.31359 Y79.71900
G01 X57.21164 Y79.72916
G01 X57.11403 Y79.76030
G01 X57.10092 Y79.76604
G01 X57.07029 Y79.81293
G01 X57.03993 Y79.86233
G01 X57.01687 Y79.90234
G01 X56.98271 Y79.96795
G01 X56.95746 Y80.02210
G01 X56.95093 Y80.03582
G01 X56.93785 Y80.06244
G01 X56.92137 Y80.09850
G01 X56.90562 Y80.13564
G01 X56.89391 Y80.16178
G01 X56.87923 Y80.19284
G01 X56.86157 Y80.22228
G01 X56.82332 Y80.27956
G01 X56.81921 Y80.28507
G01 X56.80285 Y80.30711
G01 X56.77979 Y80.33259
G01 X56.75606 Y80.35748
G01 X55.89640 Y81.21717
G01 X55.82419 Y81.30178
G01 X55.78779 Y81.35189
G01 X55.66874 Y81.59027
G01 X55.64753 Y81.65557
G01 X55.64461 Y81.66665
G01 X55.66841 Y81.75540
G01 X55.70920 Y81.83543
G01 X55.81329 Y81.89233
G01 X55.87448 Y81.91765
G01 X56.08492 Y81.97368
G01 X56.13115 Y81.97917
G01 X56.21408 Y81.98407
G01 X69.34578 Y81.98407
G01 X69.45667 Y81.97528
G01 X69.51786 Y81.96561
G01 X69.52380 Y81.96464
G01 X69.63214 Y81.88217
G01 X69.64357 Y81.87163
G01 X69.66345 Y81.85250
G01 X70.66909 Y80.84686
G01 X70.74133 Y80.76221
G01 X70.78123 Y80.70724
G01 X70.79952 Y80.57171
G01 X70.80015 Y80.55619
G01 X70.80064 Y80.52921
G01 X70.80064 Y76.86828
G01 X70.79187 Y76.75741
G01 X70.78220 Y76.69622
G01 X70.77656 Y76.66493
G01 X70.69177 Y76.56955
G01 X70.67600 Y76.55467
G01 X70.67478 Y76.55355
G01 X70.65144 Y76.53140
G01 X70.62812 Y76.50491
G01 X70.57420 Y76.44055
G01 X70.51740 Y76.38022
G01 X70.49579 Y76.35983
G01 X70.46500 Y76.32897
G01 X70.45164 Y76.31479
G01 X70.33287 Y76.21065
G01 X70.24966 Y76.14985
G01 X70.24964 Y76.14982
G01 X70.24740 Y76.14819
G01 X70.24649 Y76.14751
G01 X70.23092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.24964 Y76.14982 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.24964 Y76.14982
G01 X70.21557 Y76.14896
G01 X70.21486 Y76.14901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.37631 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.37631 Y74.41083
G01 X69.42845 Y74.42661
G01 X69.51720 Y74.46336
G01 X69.66417 Y74.54192
G01 X69.74400 Y74.59529
G01 X69.87283 Y74.70100
G01 X69.94072 Y74.76892
G01 X69.98591 Y74.82397
G01 X70.04644 Y74.89773
G01 X70.09983 Y74.97758
G01 X70.17839 Y75.12455
G01 X70.21512 Y75.21330
G01 X70.23092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.08547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.08547 Y74.41083
G01 X71.03340 Y74.39501
G01 X70.94468 Y74.35826
G01 X70.79772 Y74.27969
G01 X70.71786 Y74.22633
G01 X70.58906 Y74.12064
G01 X70.52111 Y74.05269
G01 X70.47592 Y73.99763
G01 X70.41540 Y73.92389
G01 X70.36206 Y73.84403
G01 X70.28349 Y73.69707
G01 X70.24674 Y73.60832
G01 X70.23092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.91633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.91633 Y74.41083
G01 X71.96845 Y74.42661
G01 X72.05720 Y74.46336
G01 X72.20417 Y74.54192
G01 X72.28402 Y74.59529
G01 X72.41283 Y74.70100
G01 X72.48075 Y74.76892
G01 X72.52593 Y74.82397
G01 X72.58646 Y74.89773
G01 X72.63983 Y74.97758
G01 X72.71839 Y75.12455
G01 X72.75514 Y75.21330
G01 X72.77092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.62547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.62547 Y74.41083
G01 X73.57343 Y74.39501
G01 X73.48468 Y74.35826
G01 X73.33772 Y74.27969
G01 X73.25786 Y74.22633
G01 X73.12906 Y74.12064
G01 X73.06111 Y74.05269
G01 X72.95542 Y73.92389
G01 X72.90206 Y73.84403
G01 X72.82349 Y73.69707
G01 X72.78674 Y73.60832
G01 X72.77092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.45633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.45633 Y74.41083
G01 X74.50845 Y74.42661
G01 X74.59720 Y74.46336
G01 X74.74417 Y74.54192
G01 X74.82402 Y74.59529
G01 X74.95283 Y74.70100
G01 X75.02075 Y74.76892
G01 X75.06593 Y74.82397
G01 X75.12646 Y74.89773
G01 X75.17983 Y74.97758
G01 X75.25839 Y75.12455
G01 X75.29514 Y75.21330
G01 X75.31092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.31092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.31092 Y76.09620
G01 X75.32674 Y76.14832
G01 X75.36349 Y76.23707
G01 X75.44206 Y76.38403
G01 X75.49542 Y76.46389
G01 X75.60111 Y76.59269
G01 X75.66906 Y76.66064
G01 X75.74094 Y76.71962
G01 X75.74094 Y78.01332
G01 X75.74330 Y78.06137
G01 X75.75001 Y78.12965
G01 X75.76875 Y78.22386
G01 X75.78866 Y78.28952
G01 X75.82542 Y78.37826
G01 X75.85778 Y78.43879
G01 X75.91114 Y78.51862
G01 X75.95468 Y78.57171
G01 X75.98696 Y78.60730
G01 X76.20830 Y78.82868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.48754 Y80.10788 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.48754 Y80.10788
G01 X77.73697 Y80.35728
G01 X77.77261 Y80.38959
G01 X77.82564 Y80.43310
G01 X77.90550 Y80.48646
G01 X77.96603 Y80.51882
G01 X78.05475 Y80.55558
G01 X78.08744 Y80.56548
G01 X78.14848 Y80.63985
G01 X78.21640 Y80.70777
G01 X78.25246 Y80.73736
G01 X78.28251 Y80.73630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.27482 Y80.82532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.27482 Y80.82532
G01 X78.17200 Y80.82532
G01 X78.20197 Y80.78877
G01 X78.25343 Y80.73734
G01 X78.28251 Y80.73630
G01 X78.39590 Y80.73627
G01 X78.48218 Y80.73239
G01 X78.48627 Y80.73201
G01 X78.55688 Y80.72863
G01 X78.66587 Y80.72863
G01 X78.71894 Y80.72609
G01 X78.73263 Y80.72474
G01 X78.77847 Y80.72243
G01 X78.88393 Y80.72243
G01 X78.91982 Y80.72070
G01 X78.94119 Y80.71859
G01 X78.97420 Y80.71697
G01 X79.07779 Y80.71697
G01 X79.10794 Y80.71550
G01 X79.13143 Y80.71316
G01 X79.16158 Y80.71169
G01 X79.26514 Y80.71169
G01 X79.29816 Y80.71006
G01 X79.31952 Y80.70795
G01 X79.35541 Y80.70622
G01 X79.46089 Y80.70622
G01 X79.50677 Y80.70391
G01 X79.52041 Y80.70257
G01 X79.57347 Y80.70003
G01 X79.68248 Y80.70003
G01 X79.75307 Y80.69665
G01 X79.75711 Y80.69627
G01 X79.84344 Y80.69238
G01 X79.89191 Y80.69238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.62617 Y82.86032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.62617 Y82.86032
G01 X80.05091 Y82.86032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.95731 Y82.66365 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.95731 Y82.66365
G01 X79.95838 Y82.66863
G01 X79.98312 Y82.75042
G01 X80.02170 Y82.82664
G01 X80.04410 Y82.85654
G01 X80.05091 Y82.86032
G01 X80.08845 Y82.88115
G01 X80.16557 Y82.91559
G01 X80.37362 Y82.97869
G01 X80.45073 Y82.99100
G01 X80.55294 Y82.99989
G01 X80.56120 Y83.00000
G01 X80.57093 Y83.00007
G01 X82.73508 Y83.00007
G01 X82.82731 Y82.99400
G01 X82.90442 Y82.98384
G01 X83.10800 Y82.92829
G01 X83.18512 Y82.89634
G01 X83.26932 Y82.84973
G01 X83.30818 Y82.78242
G01 X83.33739 Y82.70216
G01 X83.35736 Y82.62766
G01 X83.35896 Y82.61864
G01 X83.35736 Y82.61468
G01 X83.26924 Y82.39761
G01 X83.22934 Y82.32845
G01 X83.14522 Y82.21069
G01 X83.11954 Y82.18138
G01 X83.08809 Y82.14780
G01 X82.35698 Y81.41669
G01 X82.33328 Y81.39180
G01 X82.31016 Y81.36629
G01 X82.28974 Y81.33876
G01 X82.25147 Y81.28148
G01 X82.23381 Y81.25202
G01 X82.21913 Y81.22098
G01 X82.19279 Y81.15738
G01 X82.18123 Y81.12504
G01 X82.17288 Y81.09172
G01 X82.15944 Y81.02426
G01 X82.15441 Y80.99022
G01 X82.15271 Y80.95596
G01 X82.15187 Y80.92151
G01 X82.15187 Y80.48255
G01 X82.15919 Y80.46711
G01 X82.18598 Y80.40257
G01 X82.24209 Y80.24575
G01 X82.25713 Y80.19629
G01 X82.29642 Y80.03947
G01 X82.30432 Y79.99990
G01 X82.32759 Y79.84306
G01 X82.33092 Y79.80917
G01 X82.33864 Y79.65233
G01 X82.33864 Y79.62030
G01 X82.33092 Y79.46350
G01 X82.32759 Y79.42959
G01 X82.31072 Y79.31598
G01 X82.30633 Y79.22665
G01 X82.30252 Y79.18784
G01 X82.28070 Y79.04082
G01 X82.27189 Y78.99660
G01 X82.23506 Y78.84959
G01 X82.21865 Y78.79564
G01 X82.16605 Y78.64860
G01 X82.15307 Y78.61497
G01 X82.15187 Y78.61210
G01 X82.15187 Y77.38492
G01 X82.14580 Y77.29269
G01 X82.13564 Y77.21558
G01 X82.12855 Y77.17176
G01 X82.03513 Y77.05696
G01 X81.98060 Y77.00242
G01 X81.84265 Y76.89434
G01 X81.83950 Y76.89401
G01 X81.77275 Y76.88721
G01 X81.69566 Y76.88345
G01 X81.69211 Y76.88347
G01 X81.62647 Y76.88073
G01 X81.47303 Y76.86714
G01 X81.46056 Y76.86503
G01 X81.39320 Y76.85025
G01 X81.29005 Y76.82226
G01 X81.23369 Y76.80207
G01 X81.17019 Y76.77578
G01 X81.11606 Y76.75017
G01 X81.02332 Y76.69704
G01 X80.96523 Y76.65985
G01 X80.95495 Y76.65254
G01 X80.83681 Y76.55365
G01 X80.81090 Y76.53085
G01 X80.78810 Y76.50494
G01 X80.68921 Y76.38680
G01 X80.68190 Y76.37651
G01 X80.64471 Y76.31843
G01 X80.59155 Y76.22566
G01 X80.57910 Y76.19932
G01 X80.56539 Y76.17189
G01 X80.54746 Y76.13791
G01 X80.53349 Y76.10994
G01 X80.52178 Y76.08518
G01 X80.48695 Y76.02010
G01 X80.45134 Y75.96074
G01 X80.41228 Y75.88751
G01 X80.39092 Y75.84235
G01 X80.39092 Y75.26534
G01 X80.37514 Y75.21330
G01 X80.33839 Y75.12455
G01 X80.25983 Y74.97758
G01 X80.20646 Y74.89773
G01 X80.14593 Y74.82397
G01 X80.10075 Y74.76892
G01 X80.03283 Y74.70100
G01 X79.90402 Y74.59529
G01 X79.82417 Y74.54192
G01 X79.67720 Y74.46336
G01 X79.58845 Y74.42661
G01 X79.53633 Y74.41083
G01 X78.70547 Y74.41083
G01 X78.65343 Y74.39501
G01 X78.56468 Y74.35826
G01 X78.41772 Y74.27969
G01 X78.33786 Y74.22633
G01 X78.20906 Y74.12064
G01 X78.14111 Y74.05269
G01 X78.03542 Y73.92389
G01 X77.98206 Y73.84403
G01 X77.90349 Y73.69707
G01 X77.86674 Y73.60832
G01 X77.85092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.85092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.85092 Y72.72534
G01 X77.83514 Y72.67330
G01 X77.79839 Y72.58455
G01 X77.71983 Y72.43758
G01 X77.66646 Y72.35773
G01 X77.60593 Y72.28397
G01 X77.56075 Y72.22892
G01 X77.49283 Y72.16100
G01 X77.42092 Y72.10200
G01 X77.42092 Y67.47232
G01 X77.41856 Y67.42431
G01 X77.41185 Y67.35601
G01 X77.39311 Y67.26180
G01 X77.37319 Y67.19614
G01 X77.33644 Y67.10742
G01 X77.30408 Y67.04689
G01 X77.25071 Y66.96703
G01 X77.20720 Y66.91400
G01 X77.17489 Y66.87836
G01 X75.58364 Y65.28710
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.00169 Y61.66588 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.00169 Y61.66588
G01 X77.00141 Y61.66567
G01 X76.99334 Y61.64614
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.98422 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.98422 Y61.66677
G01 X77.00172 Y61.66588
G01 X77.06082 Y61.70614
G01 X77.18513 Y61.80733
G01 X77.19920 Y61.82112
G01 X77.23149 Y61.85107
G01 X77.25513 Y61.87177
G01 X77.31449 Y61.93009
G01 X77.37091 Y61.99232
G01 X77.41955 Y62.04096
G01 X77.46390 Y62.08117
G01 X77.50134 Y62.11007
G01 X77.54848 Y62.14652
G01 X77.60507 Y62.18594
G01 X77.61576 Y62.19265
G01 X77.75231 Y62.26389
G01 X77.78328 Y62.27913
G01 X77.81599 Y62.29028
G01 X77.96295 Y62.33644
G01 X77.97527 Y62.33926
G01 X78.04312 Y62.35137
G01 X78.14916 Y62.36499
G01 X78.20893 Y62.36793
G01 X78.27774 Y62.36793
G01 X78.33750 Y62.36499
G01 X78.44355 Y62.35137
G01 X78.51137 Y62.33926
G01 X78.52371 Y62.33644
G01 X78.67065 Y62.29028
G01 X78.70334 Y62.27913
G01 X78.73433 Y62.26392
G01 X78.87090 Y62.19262
G01 X78.88157 Y62.18594
G01 X78.93819 Y62.14652
G01 X78.94926 Y62.13794
G01 X79.02277 Y62.08117
G01 X79.06712 Y62.04096
G01 X79.11578 Y61.99227
G01 X79.17212 Y61.93011
G01 X79.21180 Y61.88968
G01 X79.23115 Y61.87141
G01 X79.23450 Y61.86824
G01 X79.28518 Y61.81990
G01 X79.38147 Y61.74076
G01 X79.42828 Y61.70743
G01 X79.43712 Y61.70108
G01 X79.48421 Y61.66679
G01 X79.48421 Y61.66677
G01 X79.48505 Y61.66618
G01 X79.49333 Y61.64614
G01 X79.49333 Y60.44083
G01 X79.48528 Y60.42143
G01 X79.48492 Y60.42117
G01 X79.42582 Y60.38092
G01 X79.30159 Y60.27977
G01 X79.28746 Y60.26593
G01 X79.25521 Y60.23603
G01 X79.23153 Y60.21531
G01 X79.17212 Y60.15694
G01 X79.11578 Y60.09478
G01 X79.06712 Y60.04609
G01 X79.02277 Y60.00591
G01 X78.93816 Y59.94053
G01 X78.88157 Y59.90111
G01 X78.87090 Y59.89440
G01 X78.73433 Y59.82313
G01 X78.70334 Y59.80792
G01 X78.67065 Y59.79677
G01 X78.52371 Y59.75061
G01 X78.51137 Y59.74780
G01 X78.44355 Y59.73568
G01 X78.33750 Y59.72206
G01 X78.27774 Y59.71912
G01 X78.20893 Y59.71912
G01 X78.14914 Y59.72206
G01 X78.04312 Y59.73568
G01 X77.97527 Y59.74780
G01 X77.96293 Y59.75061
G01 X77.81599 Y59.79677
G01 X77.78330 Y59.80792
G01 X77.75231 Y59.82316
G01 X77.65483 Y59.87403
G01 X77.61574 Y59.89443
G01 X77.60507 Y59.90111
G01 X77.54848 Y59.94053
G01 X77.46390 Y60.00588
G01 X77.41955 Y60.04609
G01 X77.37091 Y60.09473
G01 X77.31449 Y60.15696
G01 X77.27497 Y60.19725
G01 X77.25551 Y60.21561
G01 X77.25226 Y60.21866
G01 X77.20146 Y60.26715
G01 X77.10517 Y60.34630
G01 X77.05838 Y60.37962
G01 X77.04949 Y60.38600
G01 X77.00240 Y60.42026
G01 X77.00162 Y60.42084
G01 X76.99334 Y60.44081
G01 X76.99334 Y61.64614
G01 X76.98505 Y61.66618
G01 X76.98422 Y61.66677
G01 X76.98422 Y61.66679
G01 X76.93713 Y61.70108
G01 X76.92829 Y61.70743
G01 X76.88147 Y61.74076
G01 X76.78518 Y61.81990
G01 X76.73451 Y61.86824
G01 X76.73116 Y61.87141
G01 X76.71180 Y61.88968
G01 X76.67213 Y61.93011
G01 X76.61579 Y61.99227
G01 X76.56710 Y62.04098
G01 X76.52277 Y62.08114
G01 X76.44924 Y62.13796
G01 X76.43814 Y62.14655
G01 X76.38158 Y62.18594
G01 X76.37088 Y62.19265
G01 X76.23433 Y62.26389
G01 X76.20334 Y62.27913
G01 X76.17065 Y62.29028
G01 X76.02372 Y62.33644
G01 X76.01137 Y62.33926
G01 X75.94353 Y62.35137
G01 X75.83751 Y62.36499
G01 X75.77772 Y62.36793
G01 X75.70891 Y62.36793
G01 X75.64914 Y62.36499
G01 X75.54310 Y62.35137
G01 X75.47528 Y62.33926
G01 X75.46293 Y62.33644
G01 X75.31600 Y62.29028
G01 X75.28331 Y62.27913
G01 X75.25232 Y62.26389
G01 X75.11577 Y62.19265
G01 X75.10507 Y62.18594
G01 X75.04851 Y62.14655
G01 X75.00129 Y62.11005
G01 X74.96388 Y62.08114
G01 X74.91955 Y62.04098
G01 X74.87086 Y61.99227
G01 X74.81452 Y61.93011
G01 X74.75511 Y61.87174
G01 X74.73149 Y61.85107
G01 X74.69921 Y61.82112
G01 X74.68514 Y61.80733
G01 X74.56083 Y61.70614
G01 X74.50172 Y61.66588
G01 X74.50170 Y61.66588
G01 X74.50142 Y61.66567
G01 X74.49334 Y61.64614
G01 X74.49334 Y60.44083
G01 X74.48529 Y60.42140
G01 X74.48493 Y60.42117
G01 X74.42583 Y60.38092
G01 X74.30152 Y60.27972
G01 X74.28745 Y60.26593
G01 X74.25516 Y60.23598
G01 X74.23152 Y60.21528
G01 X74.17216 Y60.15696
G01 X74.11574 Y60.09473
G01 X74.06710 Y60.04609
G01 X74.02275 Y60.00591
G01 X73.93817 Y59.94053
G01 X73.88158 Y59.90111
G01 X73.87089 Y59.89440
G01 X73.73434 Y59.82316
G01 X73.70337 Y59.80792
G01 X73.67066 Y59.79677
G01 X73.52370 Y59.75061
G01 X73.51138 Y59.74780
G01 X73.44353 Y59.73568
G01 X73.33749 Y59.72206
G01 X73.27772 Y59.71912
G01 X73.20891 Y59.71912
G01 X73.14915 Y59.72206
G01 X73.04310 Y59.73568
G01 X72.97528 Y59.74780
G01 X72.96294 Y59.75061
G01 X72.81600 Y59.79677
G01 X72.78331 Y59.80792
G01 X72.75232 Y59.82313
G01 X72.65484 Y59.87403
G01 X72.61572 Y59.89443
G01 X72.60508 Y59.90111
G01 X72.54849 Y59.94053
G01 X72.46388 Y60.00591
G01 X72.41953 Y60.04609
G01 X72.37087 Y60.09478
G01 X72.31453 Y60.15694
G01 X72.27485 Y60.19738
G01 X72.25550 Y60.21564
G01 X72.25215 Y60.21881
G01 X72.20147 Y60.26715
G01 X72.10518 Y60.34630
G01 X72.05837 Y60.37962
G01 X72.04953 Y60.38597
G01 X72.00244 Y60.42026
G01 X71.98491 Y60.42115
G01 X71.92586 Y60.38097
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.98491 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.98491 Y60.42117
G01 X71.98491 Y60.42115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.04953 Y60.38597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.04953 Y60.38597
G01 X72.00241 Y60.42026
G01 X72.00163 Y60.42084
G01 X71.99332 Y60.44081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.99332 Y61.64611 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.99332 Y61.64611
G01 X72.00142 Y61.66567
G01 X72.00170 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.98420 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.98420 Y61.66677
G01 X72.00173 Y61.66588
G01 X72.06083 Y61.70614
G01 X72.18506 Y61.80728
G01 X72.19919 Y61.82112
G01 X72.23144 Y61.85102
G01 X72.25512 Y61.87174
G01 X72.31453 Y61.93011
G01 X72.37087 Y61.99227
G01 X72.41953 Y62.04096
G01 X72.46385 Y62.08114
G01 X72.50129 Y62.11005
G01 X72.54849 Y62.14649
G01 X72.60508 Y62.18594
G01 X72.61577 Y62.19265
G01 X72.75232 Y62.26392
G01 X72.78331 Y62.27913
G01 X72.81600 Y62.29028
G01 X72.96294 Y62.33644
G01 X72.97528 Y62.33926
G01 X73.04310 Y62.35137
G01 X73.14915 Y62.36499
G01 X73.20891 Y62.36793
G01 X73.27772 Y62.36793
G01 X73.33749 Y62.36499
G01 X73.44353 Y62.35137
G01 X73.51138 Y62.33926
G01 X73.52370 Y62.33644
G01 X73.67066 Y62.29028
G01 X73.70337 Y62.27913
G01 X73.73434 Y62.26389
G01 X73.87089 Y62.19265
G01 X73.88158 Y62.18594
G01 X73.93817 Y62.14652
G01 X74.02275 Y62.08114
G01 X74.06710 Y62.04096
G01 X74.11574 Y61.99232
G01 X74.17216 Y61.93009
G01 X74.21168 Y61.88980
G01 X74.23114 Y61.87144
G01 X74.23439 Y61.86839
G01 X74.28519 Y61.81990
G01 X74.38148 Y61.74076
G01 X74.42827 Y61.70743
G01 X74.43716 Y61.70106
G01 X74.48422 Y61.66679
G01 X74.50170 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.43716 Y61.70106 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.43716 Y61.70106
G01 X74.48503 Y61.66618
G01 X74.49334 Y61.64614
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.49334 Y60.44083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.49334 Y60.44083
G01 X74.50162 Y60.42084
G01 X74.50241 Y60.42026
G01 X74.54952 Y60.38597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.48493 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.48493 Y60.42117
G01 X74.48493 Y60.42115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.42583 Y60.38092 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.42583 Y60.38092
G01 X74.48493 Y60.42115
G01 X74.50243 Y60.42026
G01 X74.54952 Y60.38597
G01 X74.55836 Y60.37962
G01 X74.60518 Y60.34630
G01 X74.70147 Y60.26715
G01 X74.75214 Y60.21881
G01 X74.75549 Y60.21564
G01 X74.77485 Y60.19738
G01 X74.81452 Y60.15694
G01 X74.87086 Y60.09478
G01 X74.91955 Y60.04607
G01 X74.96388 Y60.00591
G01 X75.04851 Y59.94051
G01 X75.10507 Y59.90111
G01 X75.11574 Y59.89443
G01 X75.15483 Y59.87403
G01 X75.25232 Y59.82316
G01 X75.28331 Y59.80792
G01 X75.31600 Y59.79677
G01 X75.46293 Y59.75061
G01 X75.47528 Y59.74780
G01 X75.54310 Y59.73568
G01 X75.64914 Y59.72206
G01 X75.70891 Y59.71912
G01 X75.77772 Y59.71912
G01 X75.83751 Y59.72206
G01 X75.94353 Y59.73568
G01 X76.01137 Y59.74780
G01 X76.02372 Y59.75061
G01 X76.17065 Y59.79677
G01 X76.20334 Y59.80792
G01 X76.23433 Y59.82316
G01 X76.37088 Y59.89440
G01 X76.38158 Y59.90111
G01 X76.43814 Y59.94051
G01 X76.52277 Y60.00591
G01 X76.56710 Y60.04607
G01 X76.61579 Y60.09478
G01 X76.67213 Y60.15694
G01 X76.73154 Y60.21531
G01 X76.75516 Y60.23598
G01 X76.78744 Y60.26593
G01 X76.80151 Y60.27972
G01 X76.92582 Y60.38092
G01 X76.98493 Y60.42117
G01 X76.98528 Y60.42140
G01 X76.99334 Y60.44081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.98493 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.98493 Y60.42117
G01 X76.98493 Y60.42115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.92582 Y60.38092 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.92582 Y60.38092
G01 X76.98493 Y60.42115
G01 X77.00243 Y60.42026
G01 X77.04949 Y60.38600
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.49333 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.49333 Y61.64614
G01 X79.50141 Y61.66565
G01 X79.50174 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.48421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.48421 Y61.66677
G01 X79.50174 Y61.66588
G01 X79.56079 Y61.70608
G01 X79.68513 Y61.80733
G01 X79.69915 Y61.82110
G01 X79.73148 Y61.85107
G01 X79.75513 Y61.87177
G01 X79.81449 Y61.93009
G01 X79.87090 Y61.99232
G01 X79.91954 Y62.04096
G01 X79.96389 Y62.08117
G01 X80.00133 Y62.11007
G01 X80.04847 Y62.14652
G01 X80.10506 Y62.18594
G01 X80.11576 Y62.19265
G01 X80.25233 Y62.26392
G01 X80.28330 Y62.27911
G01 X80.31599 Y62.29028
G01 X80.46295 Y62.33644
G01 X80.47524 Y62.33926
G01 X80.54311 Y62.35137
G01 X80.64916 Y62.36499
G01 X80.70892 Y62.36793
G01 X80.77773 Y62.36793
G01 X80.83750 Y62.36499
G01 X80.94354 Y62.35137
G01 X81.01136 Y62.33926
G01 X81.02371 Y62.33644
G01 X81.17064 Y62.29028
G01 X81.20333 Y62.27913
G01 X81.23432 Y62.26392
G01 X81.37090 Y62.19262
G01 X81.38157 Y62.18594
G01 X81.43818 Y62.14652
G01 X81.44926 Y62.13794
G01 X81.52276 Y62.08114
G01 X81.56711 Y62.04096
G01 X81.61575 Y61.99232
G01 X81.67217 Y61.93009
G01 X81.71169 Y61.88980
G01 X81.73115 Y61.87144
G01 X81.73440 Y61.86839
G01 X81.78522 Y61.81988
G01 X81.88146 Y61.74076
G01 X81.92833 Y61.70741
G01 X81.93711 Y61.70108
G01 X81.98421 Y61.66679
G01 X81.98421 Y61.66677
G01 X81.98504 Y61.66618
G01 X81.99333 Y61.64614
G01 X81.99333 Y60.44083
G01 X81.98530 Y60.42143
G01 X81.98492 Y60.42117
G01 X81.92586 Y60.38097
G01 X81.80158 Y60.27977
G01 X81.78751 Y60.26596
G01 X81.75520 Y60.23601
G01 X81.73153 Y60.21528
G01 X81.67212 Y60.15694
G01 X81.61575 Y60.09473
G01 X81.56711 Y60.04609
G01 X81.52276 Y60.00588
G01 X81.43818 Y59.94053
G01 X81.38159 Y59.90111
G01 X81.37090 Y59.89440
G01 X81.23432 Y59.82313
G01 X81.20336 Y59.80792
G01 X81.17064 Y59.79677
G01 X81.02371 Y59.75061
G01 X81.01136 Y59.74780
G01 X80.94354 Y59.73568
G01 X80.83750 Y59.72206
G01 X80.77773 Y59.71912
G01 X80.70892 Y59.71912
G01 X80.64916 Y59.72206
G01 X80.54311 Y59.73568
G01 X80.47524 Y59.74780
G01 X80.46295 Y59.75061
G01 X80.31599 Y59.79677
G01 X80.28330 Y59.80792
G01 X80.25233 Y59.82313
G01 X80.15482 Y59.87403
G01 X80.11573 Y59.89443
G01 X80.10506 Y59.90111
G01 X80.04847 Y59.94053
G01 X79.96389 Y60.00588
G01 X79.91954 Y60.04609
G01 X79.87090 Y60.09473
G01 X79.81449 Y60.15696
G01 X79.77497 Y60.19725
G01 X79.75551 Y60.21561
G01 X79.75226 Y60.21866
G01 X79.70143 Y60.26717
G01 X79.60519 Y60.34630
G01 X79.55833 Y60.37965
G01 X79.54954 Y60.38597
G01 X79.50242 Y60.42026
G01 X79.50161 Y60.42087
G01 X79.49333 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.48492 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.48492 Y60.42117
G01 X79.50245 Y60.42026
G01 X79.54954 Y60.38597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.98421 Y61.66677 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.98421 Y61.66677
G01 X82.00173 Y61.66588
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.99333 Y61.64614 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.99333 Y61.64614
G01 X82.00140 Y61.66565
G01 X82.00173 Y61.66588
G01 X82.06079 Y61.70608
G01 X82.18512 Y61.80733
G01 X82.19914 Y61.82110
G01 X82.23148 Y61.85107
G01 X82.25512 Y61.87177
G01 X82.31448 Y61.93009
G01 X82.37090 Y61.99232
G01 X82.41954 Y62.04096
G01 X82.46389 Y62.08117
G01 X82.50133 Y62.11007
G01 X82.54847 Y62.14652
G01 X82.60506 Y62.18594
G01 X82.61573 Y62.19262
G01 X82.75233 Y62.26392
G01 X82.78329 Y62.27913
G01 X82.81598 Y62.29028
G01 X82.96294 Y62.33644
G01 X82.97524 Y62.33926
G01 X83.04311 Y62.35137
G01 X83.14915 Y62.36499
G01 X83.20892 Y62.36793
G01 X83.27773 Y62.36793
G01 X83.33749 Y62.36499
G01 X83.44354 Y62.35137
G01 X83.51141 Y62.33926
G01 X83.52370 Y62.33644
G01 X83.67066 Y62.29028
G01 X83.70335 Y62.27911
G01 X83.73432 Y62.26392
G01 X83.87089 Y62.19265
G01 X83.88159 Y62.18594
G01 X83.93818 Y62.14652
G01 X84.02276 Y62.08114
G01 X84.06711 Y62.04096
G01 X84.11575 Y61.99232
G01 X84.15593 Y61.94797
G01 X84.22131 Y61.86339
G01 X84.24631 Y61.82892
G01 X84.26073 Y61.80680
G01 X84.26741 Y61.79610
G01 X84.33871 Y61.65953
G01 X84.35393 Y61.62856
G01 X84.36505 Y61.59590
G01 X84.41123 Y61.44891
G01 X84.41405 Y61.43662
G01 X84.42619 Y61.36875
G01 X84.43980 Y61.26270
G01 X84.44272 Y61.20294
G01 X84.44359 Y61.16854
G01 X84.44359 Y60.91853
G01 X84.44272 Y60.88412
G01 X84.43980 Y60.82435
G01 X84.42619 Y60.71830
G01 X84.41405 Y60.65043
G01 X84.41123 Y60.63814
G01 X84.36505 Y60.49115
G01 X84.35393 Y60.45851
G01 X84.33871 Y60.42752
G01 X84.26744 Y60.29095
G01 X84.26073 Y60.28028
G01 X84.22131 Y60.22369
G01 X84.15593 Y60.13906
G01 X84.11575 Y60.09473
G01 X84.06711 Y60.04609
G01 X84.02276 Y60.00591
G01 X83.93818 Y59.94053
G01 X83.88159 Y59.90111
G01 X83.87089 Y59.89440
G01 X83.73432 Y59.82313
G01 X83.70335 Y59.80794
G01 X83.67066 Y59.79677
G01 X83.52370 Y59.75061
G01 X83.51141 Y59.74780
G01 X83.44354 Y59.73568
G01 X83.33749 Y59.72206
G01 X83.27773 Y59.71912
G01 X83.20892 Y59.71912
G01 X83.14915 Y59.72206
G01 X83.04311 Y59.73568
G01 X82.97524 Y59.74780
G01 X82.96294 Y59.75061
G01 X82.81598 Y59.79677
G01 X82.78332 Y59.80792
G01 X82.75233 Y59.82313
G01 X82.65479 Y59.87406
G01 X82.61570 Y59.89443
G01 X82.60506 Y59.90111
G01 X82.54847 Y59.94053
G01 X82.50879 Y59.97119
G01 X82.46389 Y60.00591
G01 X82.41954 Y60.04609
G01 X82.37090 Y60.09473
G01 X82.31448 Y60.15696
G01 X82.27496 Y60.19725
G01 X82.25550 Y60.21561
G01 X82.25225 Y60.21866
G01 X82.20143 Y60.26717
G01 X82.10519 Y60.34630
G01 X82.05832 Y60.37965
G01 X82.04954 Y60.38597
G01 X82.00244 Y60.42026
G01 X81.98492 Y60.42115
G01 X81.92586 Y60.38097
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.99333 Y60.44083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.99333 Y60.44083
G01 X82.00163 Y60.42087
G01 X82.00244 Y60.42026
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.98492 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.98492 Y60.42117
G01 X81.98492 Y60.42115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.00093 Y54.37153 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.00093 Y54.37153
G01 X76.00093 Y54.46777
G01 X76.00548 Y54.51895
G01 X76.03487 Y54.62169
G01 X76.08290 Y54.71362
G01 X76.14843 Y54.79401
G01 X76.22092 Y54.85311
G01 X76.22092 Y54.82434
G01 X76.16446 Y54.77801
G01 X76.10352 Y54.70374
G01 X76.05823 Y54.61903
G01 X76.03034 Y54.52710
G01 X76.02095 Y54.43152
G01 X76.02095 Y54.37153
G01 X76.00093 Y54.37153
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.00093 Y52.59528 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.00093 Y52.59528
G01 X76.00093 Y52.69152
G01 X76.02095 Y52.69152
G01 X76.02095 Y52.63150
G01 X76.03034 Y52.53592
G01 X76.05823 Y52.44400
G01 X76.10352 Y52.35929
G01 X76.16446 Y52.28502
G01 X76.22092 Y52.23869
G01 X76.22092 Y52.12703
G01 X76.20972 Y52.15596
G01 X76.17637 Y52.22523
G01 X76.13263 Y52.28845
G01 X76.08287 Y52.34944
G01 X76.03487 Y52.44136
G01 X76.00548 Y52.54410
G01 X76.00093 Y52.59528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.16319 Y51.58965 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.16319 Y51.58965
G01 X76.19666 Y51.64154
G01 X76.22092 Y51.70539
G01 X76.22092 Y51.66115
G01 X76.21122 Y51.59861
G01 X76.21234 Y51.57824
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.10093 Y54.21151 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.10093 Y54.21151
G01 X78.05592 Y54.25652
G01 X78.01622 Y54.29817
G01 X77.96735 Y54.35207
G01 X77.91414 Y54.41667
G01 X77.90311 Y54.43152
G01 X77.87360 Y54.46866
G01 X77.83758 Y54.51070
G01 X77.79829 Y54.55159
G01 X77.76631 Y54.58116
G01 X77.72447 Y54.61519
G01 X77.68902 Y54.64054
G01 X77.64091 Y54.67077
G01 X77.61091 Y54.68730
G01 X77.59224 Y54.69807
G01 X77.53832 Y54.73038
G01 X77.47571 Y54.77237
G01 X77.46191 Y54.78260
G01 X77.45056 Y54.82108
G01 X77.43844 Y54.86815
G01 X77.43626 Y54.88842
G01 X77.43415 Y54.91085
G01 X77.43184 Y54.93554
G01 X77.43151 Y54.94212
G01 X77.43067 Y54.97651
G01 X77.43067 Y56.22652
G01 X77.43151 Y56.26093
G01 X77.43184 Y56.26751
G01 X77.43626 Y56.31463
G01 X77.43844 Y56.33490
G01 X77.45056 Y56.38196
G01 X77.46580 Y56.43368
G01 X77.47380 Y56.45905
G01 X77.49250 Y56.49718
G01 X77.51769 Y56.54486
G01 X77.53253 Y56.57147
G01 X77.55600 Y56.60183
G01 X77.59011 Y56.64356
G01 X77.61266 Y56.66980
G01 X77.63890 Y56.69235
G01 X77.68063 Y56.72647
G01 X77.71099 Y56.74993
G01 X77.73773 Y56.76482
G01 X77.78541 Y56.79002
G01 X77.82341 Y56.80863
G01 X77.84863 Y56.81658
G01 X77.90034 Y56.83185
G01 X77.94754 Y56.84402
G01 X77.96783 Y56.84620
G01 X77.97225 Y56.84661
G01 X78.01487 Y56.85059
G01 X78.02153 Y56.85093
G01 X78.05594 Y56.85176
G01 X78.60593 Y56.85176
G01 X78.64032 Y56.85093
G01 X78.64698 Y56.85059
G01 X78.69402 Y56.84620
G01 X78.69790 Y56.84582
G01 X78.71429 Y56.84402
G01 X78.76151 Y56.83185
G01 X78.81322 Y56.81658
G01 X78.83842 Y56.80863
G01 X78.87644 Y56.78999
G01 X78.90687 Y56.77394
G01 X78.92412 Y56.76482
G01 X78.95089 Y56.74991
G01 X78.98122 Y56.72647
G01 X79.02295 Y56.69235
G01 X79.04919 Y56.66980
G01 X79.07174 Y56.64356
G01 X79.10585 Y56.60183
G01 X79.12932 Y56.57147
G01 X79.14416 Y56.54486
G01 X79.16935 Y56.49718
G01 X79.18805 Y56.45905
G01 X79.19605 Y56.43368
G01 X79.21129 Y56.38196
G01 X79.22340 Y56.33490
G01 X79.22559 Y56.31463
G01 X79.23001 Y56.26751
G01 X79.23034 Y56.26093
G01 X79.23118 Y56.22652
G01 X79.23118 Y55.23101
G01 X79.23336 Y55.17585
G01 X79.23580 Y55.14486
G01 X79.26915 Y54.97651
G01 X79.27080 Y54.97127
G01 X79.28083 Y54.93714
G01 X79.28858 Y54.90859
G01 X79.29643 Y54.88143
G01 X79.30237 Y54.86195
G01 X79.32592 Y54.85225
G01 X79.50819 Y54.80028
G01 X79.56938 Y54.79058
G01 X79.68043 Y54.78177
G01 X79.87593 Y54.78177
G01 X79.91032 Y54.78093
G01 X79.91690 Y54.78060
G01 X79.96402 Y54.77620
G01 X79.96788 Y54.77582
G01 X79.98436 Y54.77399
G01 X80.03151 Y54.76185
G01 X80.08322 Y54.74659
G01 X80.10844 Y54.73864
G01 X80.12358 Y54.73155
G01 X80.14644 Y54.71999
G01 X80.19412 Y54.69482
G01 X80.22089 Y54.67994
G01 X80.25132 Y54.65639
G01 X80.29305 Y54.62225
G01 X80.31916 Y54.59977
G01 X80.34166 Y54.57361
G01 X80.37580 Y54.53191
G01 X80.39932 Y54.50148
G01 X80.41416 Y54.47486
G01 X80.43935 Y54.42718
G01 X80.45805 Y54.38906
G01 X80.46605 Y54.36368
G01 X80.48129 Y54.31197
G01 X80.49340 Y54.26490
G01 X80.49559 Y54.24463
G01 X80.50001 Y54.19751
G01 X80.50034 Y54.19094
G01 X80.50118 Y54.15652
G01 X80.50118 Y52.90651
G01 X80.50034 Y52.87212
G01 X80.50001 Y52.86554
G01 X80.49559 Y52.81842
G01 X80.49340 Y52.79815
G01 X80.48129 Y52.75109
G01 X80.46605 Y52.69937
G01 X80.45805 Y52.67400
G01 X80.43935 Y52.63587
G01 X80.41416 Y52.58820
G01 X80.39932 Y52.56158
G01 X80.37585 Y52.53122
G01 X80.34174 Y52.48949
G01 X80.31916 Y52.46325
G01 X80.29295 Y52.44070
G01 X80.25122 Y52.40659
G01 X80.22089 Y52.38312
G01 X80.19412 Y52.36823
G01 X80.14644 Y52.34303
G01 X80.10844 Y52.32442
G01 X80.08322 Y52.31647
G01 X80.03151 Y52.30120
G01 X79.98434 Y52.28906
G01 X79.96402 Y52.28685
G01 X79.91693 Y52.28246
G01 X79.91032 Y52.28213
G01 X79.87593 Y52.28126
G01 X79.32592 Y52.28126
G01 X79.29153 Y52.28213
G01 X79.28492 Y52.28246
G01 X79.23783 Y52.28685
G01 X79.21749 Y52.28906
G01 X79.21121 Y52.29048
G01 X79.17034 Y52.30120
G01 X79.11863 Y52.31647
G01 X79.09341 Y52.32442
G01 X79.05541 Y52.34303
G01 X79.00773 Y52.36823
G01 X78.98096 Y52.38312
G01 X78.95063 Y52.40659
G01 X78.90890 Y52.44070
G01 X78.87113 Y52.47392
G01 X78.85719 Y52.48708
G01 X78.81609 Y52.52310
G01 X78.80027 Y52.53592
G01 X78.76041 Y52.57059
G01 X78.75836 Y52.57250
G01 X78.71474 Y52.61034
G01 X78.64053 Y52.67047
G01 X78.58978 Y52.70918
G01 X78.58769 Y52.71078
G01 X78.58724 Y52.71111
G01 X78.56859 Y52.80483
G01 X78.56331 Y52.85848
G01 X78.56095 Y52.90651
G01 X78.56095 Y54.15652
G01 X78.56331 Y54.20455
G01 X78.56397 Y54.21151
G01 X78.60593 Y54.24953
G01 X78.61086 Y54.25403
G01 X78.64675 Y54.28692
G01 X78.68724 Y54.32208
G01 X78.69668 Y54.32985
G01 X78.73560 Y54.36376
G01 X78.75759 Y54.38413
G01 X78.79005 Y54.41245
G01 X78.80227 Y54.42248
G01 X78.83387 Y54.45017
G01 X78.84903 Y54.46434
G01 X78.87776 Y54.48949
G01 X78.89094 Y54.50031
G01 X78.91924 Y54.52515
G01 X78.93181 Y54.53696
G01 X78.95912 Y54.56094
G01 X78.97273 Y54.57211
G01 X79.00004 Y54.59609
G01 X79.01261 Y54.60790
G01 X79.04091 Y54.63274
G01 X79.05409 Y54.64356
G01 X79.08282 Y54.66871
G01 X79.09798 Y54.68288
G01 X79.12958 Y54.71057
G01 X79.14179 Y54.72060
G01 X79.17426 Y54.74892
G01 X79.19625 Y54.76929
G01 X79.23516 Y54.80320
G01 X79.24461 Y54.81097
G01 X79.28510 Y54.84613
G01 X79.30237 Y54.86195
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.56397 Y54.21151 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.56397 Y54.21151
G01 X78.10093 Y54.21151
G01 X78.10093 Y52.63150
G01 X78.09153 Y52.53592
G01 X78.06364 Y52.44400
G01 X78.01835 Y52.35929
G01 X77.95742 Y52.28502
G01 X77.90093 Y52.23867
G01 X77.90093 Y52.20994
G01 X77.97339 Y52.26904
G01 X78.03898 Y52.34944
G01 X78.06351 Y52.39643
G01 X78.10438 Y52.46163
G01 X78.15493 Y52.51962
G01 X78.19864 Y52.56244
G01 X78.27888 Y52.62607
G01 X78.37057 Y52.67161
G01 X78.46974 Y52.69711
G01 X78.53024 Y52.70608
G01 X78.58978 Y52.70918
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.58893 Y54.37153 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.58893 Y54.37153
G01 X81.60895 Y54.37153
G01 X81.60895 Y54.43152
G01 X81.61834 Y54.52710
G01 X81.64623 Y54.61903
G01 X81.69152 Y54.70374
G01 X81.75246 Y54.77801
G01 X81.80892 Y54.82434
G01 X81.80892 Y54.85311
G01 X81.73643 Y54.79401
G01 X81.67090 Y54.71362
G01 X81.62287 Y54.62169
G01 X81.59348 Y54.51895
G01 X81.58893 Y54.46777
G01 X81.58893 Y54.37153
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.17778 Y52.70918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.17778 Y52.70918
G01 X84.11824 Y52.70608
G01 X84.05774 Y52.69711
G01 X83.95857 Y52.67161
G01 X83.86688 Y52.62607
G01 X83.78664 Y52.56244
G01 X83.74293 Y52.51962
G01 X83.69238 Y52.46163
G01 X83.65151 Y52.39643
G01 X83.62698 Y52.34944
G01 X83.56139 Y52.26904
G01 X83.48893 Y52.20994
G01 X83.48893 Y52.23867
G01 X83.54542 Y52.28502
G01 X83.60635 Y52.35929
G01 X83.65164 Y52.44400
G01 X83.67953 Y52.53592
G01 X83.68893 Y52.63150
G01 X83.68893 Y54.21151
G01 X84.15197 Y54.21151
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.89037 Y54.86195 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.89037 Y54.86195
G01 X84.87310 Y54.84613
G01 X84.83261 Y54.81097
G01 X84.82316 Y54.80320
G01 X84.78425 Y54.76929
G01 X84.76226 Y54.74892
G01 X84.72979 Y54.72060
G01 X84.71758 Y54.71057
G01 X84.68598 Y54.68288
G01 X84.67082 Y54.66871
G01 X84.64209 Y54.64356
G01 X84.62891 Y54.63274
G01 X84.60061 Y54.60790
G01 X84.58804 Y54.59609
G01 X84.56073 Y54.57211
G01 X84.54712 Y54.56094
G01 X84.51981 Y54.53696
G01 X84.50724 Y54.52515
G01 X84.47894 Y54.50031
G01 X84.46576 Y54.48949
G01 X84.43703 Y54.46434
G01 X84.42187 Y54.45017
G01 X84.39027 Y54.42248
G01 X84.37805 Y54.41245
G01 X84.34559 Y54.38413
G01 X84.32360 Y54.36376
G01 X84.28468 Y54.32985
G01 X84.27524 Y54.32208
G01 X84.23475 Y54.28692
G01 X84.19886 Y54.25403
G01 X84.19393 Y54.24953
G01 X84.15197 Y54.21151
G01 X84.15131 Y54.20455
G01 X84.14895 Y54.15652
G01 X84.14895 Y52.90651
G01 X84.15131 Y52.85848
G01 X84.15659 Y52.80483
G01 X84.17524 Y52.71111
G01 X84.17569 Y52.71078
G01 X84.17778 Y52.70918
G01 X84.22853 Y52.67047
G01 X84.30274 Y52.61034
G01 X84.34636 Y52.57250
G01 X84.34841 Y52.57059
G01 X84.38827 Y52.53592
G01 X84.40409 Y52.52310
G01 X84.44519 Y52.48708
G01 X84.45913 Y52.47392
G01 X84.49690 Y52.44070
G01 X84.53863 Y52.40659
G01 X84.56896 Y52.38312
G01 X84.59573 Y52.36823
G01 X84.64341 Y52.34303
G01 X84.68141 Y52.32442
G01 X84.70663 Y52.31647
G01 X84.75834 Y52.30120
G01 X84.79921 Y52.29048
G01 X84.80549 Y52.28906
G01 X84.82583 Y52.28685
G01 X84.87292 Y52.28246
G01 X84.87953 Y52.28213
G01 X84.91394 Y52.28126
G01 X85.46393 Y52.28126
G01 X85.49832 Y52.28213
G01 X85.50493 Y52.28246
G01 X85.55202 Y52.28685
G01 X85.57234 Y52.28906
G01 X85.61951 Y52.30120
G01 X85.67122 Y52.31647
G01 X85.69644 Y52.32442
G01 X85.73444 Y52.34303
G01 X85.78212 Y52.36823
G01 X85.80889 Y52.38312
G01 X85.83922 Y52.40659
G01 X85.88095 Y52.44070
G01 X85.90716 Y52.46325
G01 X85.92974 Y52.48949
G01 X85.96385 Y52.53122
G01 X85.98732 Y52.56158
G01 X86.00216 Y52.58820
G01 X86.02735 Y52.63587
G01 X86.04605 Y52.67400
G01 X86.05405 Y52.69937
G01 X86.06929 Y52.75109
G01 X86.08140 Y52.79815
G01 X86.08359 Y52.81842
G01 X86.08801 Y52.86554
G01 X86.08834 Y52.87212
G01 X86.08918 Y52.90651
G01 X86.08918 Y54.15652
G01 X86.08834 Y54.19094
G01 X86.08801 Y54.19751
G01 X86.08359 Y54.24463
G01 X86.08140 Y54.26490
G01 X86.06929 Y54.31197
G01 X86.05405 Y54.36368
G01 X86.04605 Y54.38906
G01 X86.02735 Y54.42718
G01 X86.00216 Y54.47486
G01 X85.98732 Y54.50148
G01 X85.96380 Y54.53191
G01 X85.92966 Y54.57361
G01 X85.90716 Y54.59977
G01 X85.88105 Y54.62225
G01 X85.83932 Y54.65639
G01 X85.80889 Y54.67994
G01 X85.78212 Y54.69482
G01 X85.73444 Y54.71999
G01 X85.71158 Y54.73155
G01 X85.69644 Y54.73864
G01 X85.67122 Y54.74659
G01 X85.61951 Y54.76185
G01 X85.57236 Y54.77399
G01 X85.55588 Y54.77582
G01 X85.55202 Y54.77620
G01 X85.50490 Y54.78060
G01 X85.49832 Y54.78093
G01 X85.46393 Y54.78177
G01 X85.26840 Y54.78177
G01 X85.15738 Y54.79058
G01 X85.09619 Y54.80028
G01 X84.91394 Y54.85225
G01 X84.89037 Y54.86195
G01 X84.88443 Y54.88143
G01 X84.87658 Y54.90859
G01 X84.86883 Y54.93714
G01 X84.85880 Y54.97127
G01 X84.85715 Y54.97651
G01 X84.82380 Y55.14486
G01 X84.82136 Y55.17585
G01 X84.81918 Y55.23101
G01 X84.81918 Y56.22652
G01 X84.81834 Y56.26093
G01 X84.81801 Y56.26751
G01 X84.81359 Y56.31463
G01 X84.81140 Y56.33490
G01 X84.79929 Y56.38196
G01 X84.78405 Y56.43368
G01 X84.77605 Y56.45905
G01 X84.75735 Y56.49718
G01 X84.73216 Y56.54486
G01 X84.71732 Y56.57147
G01 X84.69385 Y56.60183
G01 X84.65974 Y56.64356
G01 X84.63719 Y56.66980
G01 X84.61095 Y56.69235
G01 X84.56922 Y56.72647
G01 X84.53889 Y56.74991
G01 X84.51212 Y56.76482
G01 X84.49487 Y56.77394
G01 X84.46444 Y56.78999
G01 X84.42642 Y56.80863
G01 X84.40122 Y56.81658
G01 X84.34951 Y56.83185
G01 X84.30229 Y56.84402
G01 X84.28590 Y56.84582
G01 X84.28202 Y56.84620
G01 X84.23498 Y56.85059
G01 X84.22832 Y56.85093
G01 X84.19393 Y56.85176
G01 X83.64392 Y56.85176
G01 X83.60953 Y56.85093
G01 X83.60287 Y56.85059
G01 X83.56025 Y56.84661
G01 X83.55583 Y56.84620
G01 X83.53554 Y56.84402
G01 X83.48834 Y56.83185
G01 X83.43663 Y56.81658
G01 X83.41141 Y56.80863
G01 X83.37341 Y56.79002
G01 X83.32573 Y56.76482
G01 X83.29899 Y56.74993
G01 X83.26863 Y56.72647
G01 X83.22690 Y56.69235
G01 X83.20066 Y56.66980
G01 X83.17811 Y56.64356
G01 X83.14400 Y56.60183
G01 X83.12053 Y56.57147
G01 X83.10569 Y56.54486
G01 X83.08050 Y56.49718
G01 X83.06180 Y56.45905
G01 X83.05380 Y56.43368
G01 X83.03856 Y56.38196
G01 X83.02644 Y56.33490
G01 X83.02426 Y56.31463
G01 X83.01984 Y56.26751
G01 X83.01951 Y56.26093
G01 X83.01867 Y56.22652
G01 X83.01867 Y54.97651
G01 X83.01951 Y54.94212
G01 X83.01984 Y54.93554
G01 X83.02215 Y54.91085
G01 X83.02426 Y54.88842
G01 X83.02644 Y54.86815
G01 X83.03856 Y54.82108
G01 X83.04991 Y54.78260
G01 X83.06371 Y54.77237
G01 X83.12632 Y54.73038
G01 X83.18024 Y54.69807
G01 X83.19894 Y54.68730
G01 X83.22891 Y54.67077
G01 X83.27702 Y54.64054
G01 X83.31247 Y54.61519
G01 X83.35431 Y54.58116
G01 X83.38629 Y54.55159
G01 X83.42558 Y54.51070
G01 X83.46160 Y54.46866
G01 X83.49111 Y54.43152
G01 X83.50214 Y54.41667
G01 X83.55535 Y54.35207
G01 X83.60422 Y54.29817
G01 X83.64392 Y54.25652
G01 X83.68893 Y54.21151
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.58893 Y52.59528 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.58893 Y52.59528
G01 X81.58893 Y52.69152
G01 X81.60895 Y52.69152
G01 X81.60895 Y52.63150
G01 X81.61834 Y52.53592
G01 X81.64623 Y52.44400
G01 X81.69152 Y52.35929
G01 X81.75246 Y52.28502
G01 X81.80892 Y52.23869
G01 X81.80892 Y52.12774
G01 X81.79823 Y52.15535
G01 X81.76488 Y52.22465
G01 X81.72111 Y52.28787
G01 X81.67087 Y52.34946
G01 X81.62287 Y52.44136
G01 X81.59348 Y52.54410
G01 X81.58893 Y52.59528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.75744 Y51.60671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.75744 Y51.60671
G01 X81.83910 Y51.60671
G01 X81.83968 Y51.60626
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.57897 Y49.47715 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.57897 Y49.47715
G01 X82.56170 Y49.46133
G01 X82.52121 Y49.42617
G01 X82.51176 Y49.41840
G01 X82.47285 Y49.38449
G01 X82.45086 Y49.36412
G01 X82.41839 Y49.33580
G01 X82.40618 Y49.32577
G01 X82.37458 Y49.29808
G01 X82.35942 Y49.28391
G01 X82.33069 Y49.25876
G01 X82.31751 Y49.24794
G01 X82.28921 Y49.22310
G01 X82.27664 Y49.21129
G01 X82.24933 Y49.18731
G01 X82.23572 Y49.17614
G01 X82.20841 Y49.15216
G01 X82.19584 Y49.14035
G01 X82.16754 Y49.11551
G01 X82.15436 Y49.10469
G01 X82.12563 Y49.07954
G01 X82.11047 Y49.06537
G01 X82.07887 Y49.03768
G01 X82.06665 Y49.02765
G01 X82.03419 Y48.99933
G01 X82.01220 Y48.97896
G01 X81.97328 Y48.94505
G01 X81.96384 Y48.93728
G01 X81.92335 Y48.90212
G01 X81.88746 Y48.86923
G01 X81.88253 Y48.86473
G01 X81.84057 Y48.82671
G01 X81.83991 Y48.81975
G01 X81.83755 Y48.77172
G01 X81.83755 Y47.52171
G01 X81.83991 Y47.47368
G01 X81.84519 Y47.42003
G01 X81.86384 Y47.32631
G01 X81.86429 Y47.32598
G01 X81.86638 Y47.32438
G01 X81.91713 Y47.28567
G01 X81.99134 Y47.22554
G01 X82.03496 Y47.18770
G01 X82.03701 Y47.18579
G01 X82.07687 Y47.15112
G01 X82.09269 Y47.13830
G01 X82.13379 Y47.10228
G01 X82.14735 Y47.08948
G01 X82.15700 Y47.08054
G01 X82.15741 Y47.08015
G01 X82.18550 Y47.05592
G01 X82.22723 Y47.02179
G01 X82.25756 Y46.99832
G01 X82.28433 Y46.98343
G01 X82.33201 Y46.95823
G01 X82.37001 Y46.93962
G01 X82.39523 Y46.93167
G01 X82.44694 Y46.91640
G01 X82.48781 Y46.90568
G01 X82.49409 Y46.90426
G01 X82.51443 Y46.90205
G01 X82.56152 Y46.89766
G01 X82.56813 Y46.89733
G01 X82.60254 Y46.89646
G01 X83.15253 Y46.89646
G01 X83.18692 Y46.89733
G01 X83.19353 Y46.89766
G01 X83.24062 Y46.90205
G01 X83.26094 Y46.90426
G01 X83.30811 Y46.91640
G01 X83.35982 Y46.93167
G01 X83.38504 Y46.93962
G01 X83.42304 Y46.95823
G01 X83.47072 Y46.98343
G01 X83.49749 Y46.99832
G01 X83.52782 Y47.02179
G01 X83.56955 Y47.05590
G01 X83.59576 Y47.07845
G01 X83.61834 Y47.10469
G01 X83.65245 Y47.14642
G01 X83.67592 Y47.17678
G01 X83.69076 Y47.20340
G01 X83.71595 Y47.25107
G01 X83.73465 Y47.28920
G01 X83.74265 Y47.31457
G01 X83.75789 Y47.36629
G01 X83.77000 Y47.41335
G01 X83.77219 Y47.43362
G01 X83.77661 Y47.48074
G01 X83.77694 Y47.48732
G01 X83.77778 Y47.52171
G01 X83.77778 Y48.77172
G01 X83.77694 Y48.80614
G01 X83.77661 Y48.81271
G01 X83.77219 Y48.85983
G01 X83.77000 Y48.88010
G01 X83.75789 Y48.92717
G01 X83.74265 Y48.97888
G01 X83.73465 Y49.00426
G01 X83.71595 Y49.04238
G01 X83.69076 Y49.09006
G01 X83.67592 Y49.11668
G01 X83.65240 Y49.14711
G01 X83.61826 Y49.18881
G01 X83.59576 Y49.21497
G01 X83.56965 Y49.23745
G01 X83.52792 Y49.27159
G01 X83.49749 Y49.29514
G01 X83.47072 Y49.31002
G01 X83.42304 Y49.33519
G01 X83.39373 Y49.34982
G01 X83.38502 Y49.35384
G01 X83.35982 Y49.36179
G01 X83.30811 Y49.37705
G01 X83.26096 Y49.38919
G01 X83.24448 Y49.39102
G01 X83.24062 Y49.39140
G01 X83.19350 Y49.39580
G01 X83.18692 Y49.39613
G01 X83.15253 Y49.39696
G01 X82.95703 Y49.39696
G01 X82.84598 Y49.40578
G01 X82.78479 Y49.41548
G01 X82.60254 Y49.46745
G01 X82.57897 Y49.47715
G01 X82.57303 Y49.49663
G01 X82.56518 Y49.52379
G01 X82.55743 Y49.55234
G01 X82.54740 Y49.58647
G01 X82.54575 Y49.59171
G01 X82.51240 Y49.76006
G01 X82.50996 Y49.79105
G01 X82.50778 Y49.84621
G01 X82.50778 Y50.84172
G01 X82.50694 Y50.87613
G01 X82.50661 Y50.88253
G01 X82.50219 Y50.92983
G01 X82.49998 Y50.95012
G01 X82.48789 Y50.99717
G01 X82.47265 Y51.04888
G01 X82.46465 Y51.07425
G01 X82.44595 Y51.11238
G01 X82.42076 Y51.16006
G01 X82.40592 Y51.18667
G01 X82.38245 Y51.21703
G01 X82.34834 Y51.25876
G01 X82.32576 Y51.28500
G01 X82.29955 Y51.30755
G01 X82.25782 Y51.34167
G01 X82.22749 Y51.36513
G01 X82.20072 Y51.38002
G01 X82.18959 Y51.38591
G01 X82.15362 Y51.40628
G01 X82.09320 Y51.44288
G01 X82.09297 Y51.44304
G01 X82.04562 Y51.47174
G01 X82.03894 Y51.47575
G01 X81.97572 Y51.51324
G01 X81.92477 Y51.54575
G01 X81.88253 Y51.57466
G01 X81.83971 Y51.60626
G01 X81.83968 Y51.60626
G01 X81.83224 Y51.62874
G01 X81.82190 Y51.67278
G01 X81.81613 Y51.72244
G01 X81.78517 Y51.64093
G01 X81.76566 Y51.61073
G01 X81.75744 Y51.60671
G01 X81.61311 Y51.53656
G01 X81.55195 Y51.51479
G01 X81.38200 Y51.47474
G01 X81.35424 Y51.47154
G01 X81.33254 Y51.46935
G01 X81.30448 Y51.46699
G01 X81.29810 Y51.46643
G01 X81.24443 Y51.46140
G01 X81.22411 Y51.45919
G01 X81.17694 Y51.44705
G01 X81.12523 Y51.43178
G01 X81.10001 Y51.42383
G01 X81.06201 Y51.40522
G01 X81.01433 Y51.38002
G01 X80.98759 Y51.36513
G01 X80.95723 Y51.34167
G01 X80.91550 Y51.30755
G01 X80.88926 Y51.28500
G01 X80.86671 Y51.25876
G01 X80.83260 Y51.21703
G01 X80.80913 Y51.18667
G01 X80.79429 Y51.16006
G01 X80.76910 Y51.11238
G01 X80.75040 Y51.07425
G01 X80.74240 Y51.04888
G01 X80.72716 Y50.99717
G01 X80.71507 Y50.95012
G01 X80.71322 Y50.93354
G01 X80.71286 Y50.92983
G01 X80.70844 Y50.88269
G01 X80.70811 Y50.87613
G01 X80.70727 Y50.84172
G01 X80.70727 Y49.59171
G01 X80.70811 Y49.55732
G01 X80.70844 Y49.55084
G01 X80.70938 Y49.54068
G01 X80.71286 Y49.50362
G01 X80.71507 Y49.48332
G01 X80.72716 Y49.43628
G01 X80.73851 Y49.39780
G01 X80.75231 Y49.38757
G01 X80.81492 Y49.34558
G01 X80.86884 Y49.31327
G01 X80.88754 Y49.30250
G01 X80.91751 Y49.28597
G01 X80.96562 Y49.25574
G01 X81.00107 Y49.23039
G01 X81.04291 Y49.19636
G01 X81.07489 Y49.16679
G01 X81.11418 Y49.12590
G01 X81.15020 Y49.08386
G01 X81.17971 Y49.04675
G01 X81.19074 Y49.03187
G01 X81.24395 Y48.96727
G01 X81.29282 Y48.91337
G01 X81.33252 Y48.87172
G01 X81.37753 Y48.82671
G01 X81.37753 Y47.24670
G01 X81.36813 Y47.15112
G01 X81.34024 Y47.05920
G01 X81.29495 Y46.97449
G01 X81.23402 Y46.90022
G01 X81.15977 Y46.83929
G01 X81.07506 Y46.79402
G01 X80.98314 Y46.76613
G01 X80.88754 Y46.75671
G01 X79.78754 Y46.75671
G01 X79.69193 Y46.76613
G01 X79.60001 Y46.79402
G01 X79.51530 Y46.83929
G01 X79.44106 Y46.90022
G01 X79.38012 Y46.97449
G01 X79.33483 Y47.05920
G01 X79.30694 Y47.15112
G01 X79.29755 Y47.24670
G01 X79.29755 Y47.30672
G01 X79.27753 Y47.30672
G01 X79.27753 Y47.21048
G01 X79.28208 Y47.15930
G01 X79.31147 Y47.05656
G01 X79.35950 Y46.96464
G01 X79.42503 Y46.88424
G01 X79.50542 Y46.81871
G01 X79.59734 Y46.77068
G01 X79.74766 Y46.72768
G01 X79.81969 Y46.70078
G01 X79.88665 Y46.66296
G01 X79.93740 Y46.62877
G01 X80.01591 Y46.56296
G01 X80.07903 Y46.48226
G01 X80.12399 Y46.39021
G01 X80.14494 Y46.33273
G01 X80.16978 Y46.23334
G01 X80.17339 Y46.13096
G01 X80.16488 Y46.08247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.72421 Y46.10457 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.72421 Y46.10457
G01 X80.72264 Y46.10619
G01 X80.72089 Y46.11343
G01 X80.71281 Y46.17409
G01 X80.70999 Y46.27652
G01 X80.72851 Y46.37731
G01 X80.75022 Y46.42994
G01 X80.76760 Y46.47203
G01 X80.79673 Y46.52585
G01 X80.84126 Y46.59392
G01 X80.89643 Y46.65369
G01 X80.96074 Y46.70350
G01 X80.98901 Y46.72186
G01 X81.01316 Y46.73659
G01 X81.01642 Y46.73845
G01 X81.03260 Y46.74729
G01 X81.16976 Y46.81879
G01 X81.24999 Y46.88424
G01 X81.31558 Y46.96464
G01 X81.34011 Y47.01163
G01 X81.38098 Y47.07683
G01 X81.43153 Y47.13482
G01 X81.47524 Y47.17764
G01 X81.55548 Y47.24127
G01 X81.64717 Y47.28681
G01 X81.74634 Y47.31231
G01 X81.80684 Y47.32128
G01 X81.86638 Y47.32438
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.84057 Y48.82671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.84057 Y48.82671
G01 X81.37753 Y48.82671
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.27753 Y48.98673 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.27753 Y48.98673
G01 X79.29755 Y48.98673
G01 X79.29755 Y49.04672
G01 X79.30694 Y49.14230
G01 X79.33483 Y49.23423
G01 X79.38012 Y49.31894
G01 X79.44106 Y49.39321
G01 X79.49752 Y49.43954
G01 X79.49752 Y49.46831
G01 X79.42503 Y49.40921
G01 X79.35950 Y49.32882
G01 X79.31147 Y49.23689
G01 X79.28208 Y49.13415
G01 X79.27753 Y49.08297
G01 X79.27753 Y48.98673
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.99898 Y47.32438 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.99898 Y47.32438
G01 X75.93944 Y47.32128
G01 X75.87894 Y47.31231
G01 X75.77977 Y47.28681
G01 X75.68808 Y47.24127
G01 X75.60784 Y47.17764
G01 X75.56413 Y47.13482
G01 X75.51358 Y47.07683
G01 X75.47271 Y47.01163
G01 X75.44818 Y46.96464
G01 X75.38259 Y46.88424
G01 X75.35674 Y46.86316
G01 X75.31013 Y46.81650
G01 X75.31013 Y46.85387
G01 X75.36662 Y46.90022
G01 X75.42755 Y46.97449
G01 X75.47284 Y47.05920
G01 X75.50073 Y47.15112
G01 X75.51013 Y47.24670
G01 X75.51013 Y48.82671
G01 X75.97317 Y48.82671
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.71157 Y49.47715 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.71157 Y49.47715
G01 X76.69430 Y49.46133
G01 X76.65381 Y49.42617
G01 X76.64436 Y49.41840
G01 X76.60545 Y49.38449
G01 X76.58346 Y49.36412
G01 X76.55099 Y49.33580
G01 X76.53878 Y49.32577
G01 X76.50718 Y49.29808
G01 X76.49202 Y49.28391
G01 X76.46329 Y49.25876
G01 X76.45011 Y49.24794
G01 X76.42181 Y49.22310
G01 X76.40924 Y49.21129
G01 X76.38193 Y49.18731
G01 X76.36832 Y49.17614
G01 X76.34101 Y49.15216
G01 X76.32844 Y49.14035
G01 X76.30014 Y49.11551
G01 X76.28696 Y49.10469
G01 X76.25823 Y49.07954
G01 X76.24307 Y49.06537
G01 X76.21147 Y49.03768
G01 X76.19925 Y49.02765
G01 X76.16679 Y48.99933
G01 X76.14480 Y48.97896
G01 X76.10588 Y48.94505
G01 X76.09644 Y48.93728
G01 X76.05595 Y48.90212
G01 X76.02006 Y48.86923
G01 X76.01513 Y48.86473
G01 X75.97317 Y48.82671
G01 X75.97251 Y48.81975
G01 X75.97015 Y48.77172
G01 X75.97015 Y47.52171
G01 X75.97251 Y47.47368
G01 X75.97779 Y47.42003
G01 X75.99644 Y47.32631
G01 X75.99689 Y47.32598
G01 X75.99898 Y47.32438
G01 X76.04973 Y47.28567
G01 X76.12394 Y47.22554
G01 X76.16756 Y47.18770
G01 X76.16961 Y47.18579
G01 X76.20947 Y47.15112
G01 X76.22529 Y47.13830
G01 X76.26639 Y47.10228
G01 X76.27995 Y47.08948
G01 X76.28960 Y47.08054
G01 X76.29001 Y47.08015
G01 X76.31810 Y47.05592
G01 X76.35983 Y47.02179
G01 X76.39016 Y46.99832
G01 X76.41693 Y46.98343
G01 X76.46461 Y46.95823
G01 X76.50261 Y46.93962
G01 X76.52783 Y46.93167
G01 X76.57954 Y46.91640
G01 X76.62041 Y46.90568
G01 X76.62669 Y46.90426
G01 X76.64703 Y46.90205
G01 X76.69412 Y46.89766
G01 X76.70073 Y46.89733
G01 X76.73514 Y46.89646
G01 X77.28513 Y46.89646
G01 X77.31952 Y46.89733
G01 X77.32613 Y46.89766
G01 X77.37322 Y46.90205
G01 X77.39354 Y46.90426
G01 X77.44071 Y46.91640
G01 X77.49242 Y46.93167
G01 X77.51764 Y46.93962
G01 X77.55564 Y46.95823
G01 X77.60332 Y46.98343
G01 X77.63009 Y46.99832
G01 X77.66042 Y47.02179
G01 X77.70215 Y47.05590
G01 X77.72836 Y47.07845
G01 X77.75094 Y47.10469
G01 X77.78505 Y47.14642
G01 X77.80852 Y47.17678
G01 X77.82336 Y47.20340
G01 X77.84855 Y47.25107
G01 X77.86725 Y47.28920
G01 X77.87525 Y47.31457
G01 X77.89049 Y47.36629
G01 X77.90260 Y47.41335
G01 X77.90479 Y47.43362
G01 X77.90921 Y47.48074
G01 X77.90954 Y47.48732
G01 X77.91038 Y47.52171
G01 X77.91038 Y48.77172
G01 X77.90954 Y48.80614
G01 X77.90921 Y48.81271
G01 X77.90479 Y48.85983
G01 X77.90260 Y48.88010
G01 X77.89049 Y48.92717
G01 X77.87525 Y48.97888
G01 X77.86725 Y49.00426
G01 X77.84855 Y49.04238
G01 X77.82336 Y49.09006
G01 X77.80852 Y49.11668
G01 X77.78500 Y49.14711
G01 X77.75086 Y49.18881
G01 X77.72836 Y49.21497
G01 X77.70225 Y49.23745
G01 X77.66052 Y49.27159
G01 X77.63009 Y49.29514
G01 X77.60332 Y49.31002
G01 X77.55564 Y49.33519
G01 X77.52633 Y49.34982
G01 X77.51762 Y49.35384
G01 X77.49242 Y49.36179
G01 X77.44071 Y49.37705
G01 X77.39356 Y49.38919
G01 X77.37708 Y49.39102
G01 X77.37322 Y49.39140
G01 X77.32610 Y49.39580
G01 X77.31952 Y49.39613
G01 X77.28513 Y49.39696
G01 X77.08960 Y49.39696
G01 X76.97858 Y49.40578
G01 X76.91739 Y49.41548
G01 X76.73514 Y49.46745
G01 X76.71157 Y49.47715
G01 X76.70563 Y49.49663
G01 X76.69778 Y49.52379
G01 X76.69003 Y49.55234
G01 X76.68000 Y49.58647
G01 X76.67835 Y49.59171
G01 X76.64500 Y49.76006
G01 X76.64256 Y49.79105
G01 X76.64038 Y49.84621
G01 X76.64038 Y50.84172
G01 X76.63954 Y50.87613
G01 X76.63921 Y50.88253
G01 X76.63479 Y50.92983
G01 X76.63258 Y50.95012
G01 X76.62049 Y50.99717
G01 X76.60525 Y51.04888
G01 X76.59725 Y51.07425
G01 X76.57855 Y51.11238
G01 X76.55336 Y51.16006
G01 X76.53852 Y51.18667
G01 X76.51505 Y51.21703
G01 X76.48092 Y51.25876
G01 X76.44947 Y51.29468
G01 X76.43459 Y51.31052
G01 X76.39872 Y51.35180
G01 X76.37411 Y51.38233
G01 X76.34985 Y51.41101
G01 X76.33172 Y51.43151
G01 X76.31201 Y51.45454
G01 X76.25158 Y51.52777
G01 X76.21236 Y51.57824
G01 X76.21234 Y51.57824
G01 X76.21107 Y51.57992
G01 X76.21071 Y51.58040
G01 X76.16352 Y51.58977
G01 X76.16319 Y51.58965
G01 X76.11386 Y51.56933
G01 X76.05760 Y51.54809
G01 X76.02486 Y51.53686
G01 X76.01513 Y51.53346
G01 X75.96364 Y51.51512
G01 X75.77759 Y51.47339
G01 X75.74119 Y51.46999
G01 X75.67614 Y51.46696
G01 X75.46514 Y51.46696
G01 X75.43073 Y51.46613
G01 X75.42412 Y51.46579
G01 X75.38475 Y51.46211
G01 X75.37703 Y51.46140
G01 X75.35671 Y51.45919
G01 X75.30954 Y51.44705
G01 X75.25783 Y51.43178
G01 X75.23261 Y51.42383
G01 X75.19461 Y51.40522
G01 X75.14693 Y51.38002
G01 X75.12019 Y51.36513
G01 X75.08983 Y51.34167
G01 X75.04810 Y51.30755
G01 X75.02186 Y51.28500
G01 X74.99931 Y51.25876
G01 X74.96520 Y51.21703
G01 X74.94173 Y51.18667
G01 X74.92689 Y51.16006
G01 X74.90170 Y51.11238
G01 X74.88300 Y51.07425
G01 X74.87500 Y51.04888
G01 X74.85976 Y50.99717
G01 X74.84767 Y50.95012
G01 X74.84582 Y50.93354
G01 X74.84546 Y50.92983
G01 X74.84104 Y50.88269
G01 X74.84071 Y50.87613
G01 X74.83987 Y50.84172
G01 X74.83987 Y49.59171
G01 X74.84071 Y49.55732
G01 X74.84104 Y49.55084
G01 X74.84198 Y49.54068
G01 X74.84546 Y49.50362
G01 X74.84767 Y49.48332
G01 X74.85976 Y49.43628
G01 X74.87111 Y49.39780
G01 X74.88491 Y49.38757
G01 X74.94752 Y49.34558
G01 X75.00144 Y49.31327
G01 X75.02014 Y49.30250
G01 X75.05011 Y49.28597
G01 X75.09822 Y49.25574
G01 X75.13367 Y49.23039
G01 X75.17551 Y49.19636
G01 X75.20749 Y49.16679
G01 X75.24678 Y49.12590
G01 X75.28280 Y49.08386
G01 X75.31231 Y49.04675
G01 X75.32334 Y49.03187
G01 X75.37655 Y48.96727
G01 X75.42542 Y48.91337
G01 X75.46512 Y48.87172
G01 X75.51013 Y48.82671
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.41013 Y47.21048 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.41013 Y47.21048
G01 X73.41013 Y47.30672
G01 X73.43015 Y47.30672
G01 X73.43015 Y47.24670
G01 X73.43954 Y47.15112
G01 X73.46743 Y47.05920
G01 X73.51272 Y46.97449
G01 X73.57366 Y46.90022
G01 X73.63012 Y46.85389
G01 X73.63012 Y46.81940
G01 X73.58920 Y46.85849
G01 X73.55763 Y46.88424
G01 X73.49210 Y46.96464
G01 X73.44407 Y47.05656
G01 X73.41468 Y47.15930
G01 X73.41013 Y47.21048
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.41013 Y48.98673 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.41013 Y48.98673
G01 X73.41013 Y49.08297
G01 X73.41468 Y49.13415
G01 X73.44407 Y49.23689
G01 X73.49210 Y49.32882
G01 X73.55763 Y49.40921
G01 X73.63012 Y49.46831
G01 X73.63012 Y49.43954
G01 X73.57366 Y49.39321
G01 X73.51272 Y49.31894
G01 X73.46743 Y49.23423
G01 X73.43954 Y49.14230
G01 X73.43015 Y49.04672
G01 X73.43015 Y48.98673
G01 X73.41013 Y48.98673
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.39916 Y51.54164 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.39916 Y51.54164
G01 X70.40531 Y51.58139
G01 X70.42096 Y51.64055
G01 X70.45736 Y51.73625
G01 X70.51280 Y51.82231
G01 X70.52078 Y51.83036
G01 X70.58494 Y51.89495
G01 X70.63236 Y51.93364
G01 X70.72604 Y51.99373
G01 X70.83084 Y52.03115
G01 X70.85789 Y52.03745
G01 X70.92578 Y52.04832
G01 X70.99276 Y52.05426
G01 X71.09548 Y52.08368
G01 X71.18743 Y52.13168
G01 X71.26779 Y52.19724
G01 X71.33335 Y52.27760
G01 X71.35789 Y52.32459
G01 X71.39876 Y52.38982
G01 X71.44933 Y52.44784
G01 X71.49304 Y52.49066
G01 X71.57333 Y52.55431
G01 X71.66510 Y52.59988
G01 X71.76431 Y52.62538
G01 X71.82482 Y52.63432
G01 X71.88418 Y52.63737
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.39533 Y54.13973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.39533 Y54.13973
G01 X71.85834 Y54.13970
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.59677 Y54.79015 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.59677 Y54.79015
G01 X72.57950 Y54.77432
G01 X72.53901 Y54.73917
G01 X72.52956 Y54.73140
G01 X72.49065 Y54.69749
G01 X72.46878 Y54.67724
G01 X72.43619 Y54.64880
G01 X72.42408 Y54.63886
G01 X72.39235 Y54.61110
G01 X72.37711 Y54.59685
G01 X72.34849 Y54.57176
G01 X72.33520 Y54.56086
G01 X72.30701 Y54.53610
G01 X72.29451 Y54.52436
G01 X72.26713 Y54.50031
G01 X72.25359 Y54.48921
G01 X72.22621 Y54.46515
G01 X72.21359 Y54.45332
G01 X72.18534 Y54.42850
G01 X72.17208 Y54.41763
G01 X72.14343 Y54.39254
G01 X72.12827 Y54.37836
G01 X72.09657 Y54.35060
G01 X72.08445 Y54.34064
G01 X72.05187 Y54.31222
G01 X72.03000 Y54.29195
G01 X71.99108 Y54.25807
G01 X71.98161 Y54.25030
G01 X71.94115 Y54.21514
G01 X71.90523 Y54.18222
G01 X71.90033 Y54.17775
G01 X71.85834 Y54.13970
G01 X71.85771 Y54.13274
G01 X71.85535 Y54.08471
G01 X71.85535 Y52.83470
G01 X71.85771 Y52.78670
G01 X71.86299 Y52.73303
G01 X71.88164 Y52.63930
G01 X71.88209 Y52.63897
G01 X71.88418 Y52.63737
G01 X71.93493 Y52.59866
G01 X72.00914 Y52.53854
G01 X72.05276 Y52.50069
G01 X72.05466 Y52.49891
G01 X72.09454 Y52.46424
G01 X72.11057 Y52.45121
G01 X72.15166 Y52.41522
G01 X72.16556 Y52.40212
G01 X72.20320 Y52.36899
G01 X72.24493 Y52.33486
G01 X72.27536 Y52.31131
G01 X72.30213 Y52.29643
G01 X72.34981 Y52.27123
G01 X72.38778 Y52.25261
G01 X72.41318 Y52.24461
G01 X72.46490 Y52.22937
G01 X72.50559 Y52.21870
G01 X72.51199 Y52.21725
G01 X72.53223 Y52.21507
G01 X72.57932 Y52.21065
G01 X72.58593 Y52.21032
G01 X72.62034 Y52.20948
G01 X73.17033 Y52.20948
G01 X73.20472 Y52.21032
G01 X73.21133 Y52.21065
G01 X73.25842 Y52.21507
G01 X73.27874 Y52.21725
G01 X73.32575 Y52.22937
G01 X73.37747 Y52.24461
G01 X73.40284 Y52.25261
G01 X73.44084 Y52.27123
G01 X73.48852 Y52.29643
G01 X73.51529 Y52.31131
G01 X73.54572 Y52.33486
G01 X73.58745 Y52.36899
G01 X73.61356 Y52.39147
G01 X73.63606 Y52.41763
G01 X73.67018 Y52.45934
G01 X73.69375 Y52.48980
G01 X73.70856 Y52.51639
G01 X73.73375 Y52.56407
G01 X73.75245 Y52.60219
G01 X73.76045 Y52.62757
G01 X73.77569 Y52.67928
G01 X73.78780 Y52.72632
G01 X73.78999 Y52.74662
G01 X73.79441 Y52.79376
G01 X73.79474 Y52.80031
G01 X73.79558 Y52.83473
G01 X73.79558 Y54.08471
G01 X73.79474 Y54.11913
G01 X73.79441 Y54.12571
G01 X73.78999 Y54.17283
G01 X73.78780 Y54.19309
G01 X73.77569 Y54.24016
G01 X73.76045 Y54.29188
G01 X73.75245 Y54.31725
G01 X73.74800 Y54.32683
G01 X73.73375 Y54.35538
G01 X73.70856 Y54.40305
G01 X73.69372 Y54.42967
G01 X73.67025 Y54.46002
G01 X73.63614 Y54.50176
G01 X73.61359 Y54.52799
G01 X73.58735 Y54.55055
G01 X73.54562 Y54.58466
G01 X73.51526 Y54.60813
G01 X73.48864 Y54.62296
G01 X73.45882 Y54.63871
G01 X73.44097 Y54.64816
G01 X73.40287 Y54.66683
G01 X73.37747 Y54.67486
G01 X73.32575 Y54.69010
G01 X73.27869 Y54.70221
G01 X73.26225 Y54.70404
G01 X73.25842 Y54.70440
G01 X73.21130 Y54.70882
G01 X73.20472 Y54.70915
G01 X73.17033 Y54.70998
G01 X72.97480 Y54.70998
G01 X72.86393 Y54.71877
G01 X72.80274 Y54.72845
G01 X72.62034 Y54.78044
G01 X72.59677 Y54.79015
G01 X72.59083 Y54.80963
G01 X72.58296 Y54.83688
G01 X72.57526 Y54.86533
G01 X72.56518 Y54.89957
G01 X72.56355 Y54.90473
G01 X72.53020 Y55.07303
G01 X72.52776 Y55.10401
G01 X72.52558 Y55.15921
G01 X72.52558 Y56.15474
G01 X72.52474 Y56.18913
G01 X72.52441 Y56.19563
G01 X72.52354 Y56.20490
G01 X72.51999 Y56.24282
G01 X72.51778 Y56.26312
G01 X72.50569 Y56.31016
G01 X72.49045 Y56.36187
G01 X72.48245 Y56.38725
G01 X72.46375 Y56.42537
G01 X72.43856 Y56.47305
G01 X72.42372 Y56.49967
G01 X72.40025 Y56.53002
G01 X72.36614 Y56.57175
G01 X72.34359 Y56.59799
G01 X72.31735 Y56.62055
G01 X72.27562 Y56.65466
G01 X72.24526 Y56.67813
G01 X72.21864 Y56.69296
G01 X72.20127 Y56.70213
G01 X72.17097 Y56.71816
G01 X72.13287 Y56.73683
G01 X72.10747 Y56.74485
G01 X72.05575 Y56.76009
G01 X72.00869 Y56.77221
G01 X71.99225 Y56.77404
G01 X71.98842 Y56.77439
G01 X71.94130 Y56.77881
G01 X71.93472 Y56.77914
G01 X71.90033 Y56.77998
G01 X71.35032 Y56.77998
G01 X71.31593 Y56.77914
G01 X71.30935 Y56.77881
G01 X71.26223 Y56.77439
G01 X71.24194 Y56.77221
G01 X71.19490 Y56.76009
G01 X71.14318 Y56.74485
G01 X71.11778 Y56.73683
G01 X71.07968 Y56.71816
G01 X71.03201 Y56.69296
G01 X71.00539 Y56.67813
G01 X70.97503 Y56.65466
G01 X70.93330 Y56.62055
G01 X70.90706 Y56.59797
G01 X70.88451 Y56.57175
G01 X70.85037 Y56.53002
G01 X70.82690 Y56.49967
G01 X70.81209 Y56.47305
G01 X70.78690 Y56.42537
G01 X70.76820 Y56.38727
G01 X70.76020 Y56.36187
G01 X70.74496 Y56.31016
G01 X70.73287 Y56.26312
G01 X70.73066 Y56.24282
G01 X70.72624 Y56.19571
G01 X70.72591 Y56.18913
G01 X70.72507 Y56.15474
G01 X70.72507 Y54.90473
G01 X70.72591 Y54.87031
G01 X70.72624 Y54.86373
G01 X70.72888 Y54.83554
G01 X70.73066 Y54.81661
G01 X70.73284 Y54.79634
G01 X70.74496 Y54.74928
G01 X70.75626 Y54.71080
G01 X70.77011 Y54.70056
G01 X70.83272 Y54.65857
G01 X70.88664 Y54.62627
G01 X70.90534 Y54.61550
G01 X70.93531 Y54.59896
G01 X70.98342 Y54.56874
G01 X71.01885 Y54.54339
G01 X71.06071 Y54.50935
G01 X71.09269 Y54.47978
G01 X71.13198 Y54.43889
G01 X71.16807 Y54.39673
G01 X71.19754 Y54.35972
G01 X71.20864 Y54.34476
G01 X71.26175 Y54.28029
G01 X71.31062 Y54.22639
G01 X71.35032 Y54.18474
G01 X71.39533 Y54.13973
G01 X71.39533 Y52.55972
G01 X71.38593 Y52.46412
G01 X71.35804 Y52.37219
G01 X71.31275 Y52.28748
G01 X71.25182 Y52.21324
G01 X71.17757 Y52.15228
G01 X71.09286 Y52.10702
G01 X71.00094 Y52.07913
G01 X70.90534 Y52.06971
G01 X69.80531 Y52.06971
G01 X69.77427 Y52.07278
G01 X69.70973 Y52.07913
G01 X69.61778 Y52.10702
G01 X69.53310 Y52.15228
G01 X69.45886 Y52.21324
G01 X69.39792 Y52.28748
G01 X69.35261 Y52.37219
G01 X69.32474 Y52.46412
G01 X69.31532 Y52.55972
G01 X69.31532 Y52.61972
G01 X69.29531 Y52.61972
G01 X69.29531 Y52.52348
G01 X69.29988 Y52.47230
G01 X69.32927 Y52.36955
G01 X69.37727 Y52.27763
G01 X69.47750 Y52.15472
G01 X69.54092 Y52.05408
G01 X69.56411 Y52.00491
G01 X69.59670 Y51.91311
G01 X69.61047 Y51.81670
G01 X69.60493 Y51.71944
G01 X69.59536 Y51.65899
G01 X69.58128 Y51.60618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.29531 Y54.29972 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.29531 Y54.29972
G01 X69.31532 Y54.29972
G01 X69.31532 Y54.35972
G01 X69.32474 Y54.45530
G01 X69.35261 Y54.54722
G01 X69.39792 Y54.63193
G01 X69.45886 Y54.70620
G01 X69.51530 Y54.75253
G01 X69.51530 Y54.78131
G01 X69.44280 Y54.72220
G01 X69.37730 Y54.64181
G01 X69.32927 Y54.54989
G01 X69.29988 Y54.44715
G01 X69.29531 Y54.39596
G01 X69.29531 Y54.29972
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.50244 Y60.42026 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.50244 Y60.42026
G01 X69.48492 Y60.42117
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.49332 Y60.44083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.49332 Y60.44083
G01 X69.50163 Y60.42087
G01 X69.50244 Y60.42026
G01 X69.54948 Y60.38602
G01 X69.55832 Y60.37965
G01 X69.60516 Y60.34632
G01 X69.70143 Y60.26717
G01 X69.75223 Y60.21866
G01 X69.75550 Y60.21561
G01 X69.77496 Y60.19725
G01 X69.81448 Y60.15696
G01 X69.87090 Y60.09473
G01 X69.91954 Y60.04609
G01 X69.96389 Y60.00591
G01 X70.00879 Y59.97119
G01 X70.04847 Y59.94053
G01 X70.10503 Y59.90111
G01 X70.11568 Y59.89443
G01 X70.15479 Y59.87406
G01 X70.25233 Y59.82313
G01 X70.28329 Y59.80792
G01 X70.31598 Y59.79677
G01 X70.46294 Y59.75061
G01 X70.47524 Y59.74780
G01 X70.54311 Y59.73568
G01 X70.64915 Y59.72206
G01 X70.70892 Y59.71912
G01 X70.77773 Y59.71912
G01 X70.83747 Y59.72206
G01 X70.94354 Y59.73568
G01 X71.01141 Y59.74780
G01 X71.02370 Y59.75061
G01 X71.17066 Y59.79677
G01 X71.20335 Y59.80794
G01 X71.23432 Y59.82313
G01 X71.37089 Y59.89440
G01 X71.38159 Y59.90111
G01 X71.43818 Y59.94053
G01 X71.52276 Y60.00591
G01 X71.56711 Y60.04609
G01 X71.61575 Y60.09473
G01 X71.67216 Y60.15696
G01 X71.73152 Y60.21528
G01 X71.75517 Y60.23598
G01 X71.78750 Y60.26596
G01 X71.80152 Y60.27972
G01 X71.92586 Y60.38097
G01 X71.98491 Y60.42117
G01 X71.98529 Y60.42143
G01 X71.99332 Y60.44081
G01 X71.99332 Y60.62638
G01 X71.99335 Y60.71170
G01 X71.99335 Y61.37535
G01 X71.99332 Y61.46067
G01 X71.99332 Y61.64611
G01 X71.98504 Y61.66618
G01 X71.98420 Y61.66677
G01 X71.98420 Y61.66679
G01 X71.93711 Y61.70108
G01 X71.92832 Y61.70741
G01 X71.88146 Y61.74076
G01 X71.78522 Y61.81988
G01 X71.73439 Y61.86839
G01 X71.73114 Y61.87144
G01 X71.71168 Y61.88980
G01 X71.67216 Y61.93009
G01 X71.61575 Y61.99232
G01 X71.56711 Y62.04096
G01 X71.52276 Y62.08114
G01 X71.43818 Y62.14652
G01 X71.38159 Y62.18594
G01 X71.37089 Y62.19265
G01 X71.23432 Y62.26392
G01 X71.20335 Y62.27911
G01 X71.17066 Y62.29028
G01 X71.02370 Y62.33644
G01 X71.01141 Y62.33926
G01 X70.94354 Y62.35137
G01 X70.83747 Y62.36499
G01 X70.77773 Y62.36793
G01 X70.70892 Y62.36793
G01 X70.64915 Y62.36499
G01 X70.54311 Y62.35137
G01 X70.47524 Y62.33926
G01 X70.46294 Y62.33644
G01 X70.31598 Y62.29028
G01 X70.28329 Y62.27911
G01 X70.25233 Y62.26392
G01 X70.11570 Y62.19262
G01 X70.10503 Y62.18594
G01 X70.04847 Y62.14652
G01 X70.00130 Y62.11007
G01 X69.96391 Y62.08119
G01 X69.91954 Y62.04096
G01 X69.87090 Y61.99232
G01 X69.81448 Y61.93009
G01 X69.75512 Y61.87177
G01 X69.73148 Y61.85107
G01 X69.69912 Y61.82110
G01 X69.68509 Y61.80733
G01 X69.56079 Y61.70608
G01 X69.50173 Y61.66588
G01 X69.48421 Y61.66677
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.50173 Y61.66588 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.50173 Y61.66588
G01 X69.50140 Y61.66565
G01 X69.49332 Y61.64614
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.04954 Y60.38597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.04954 Y60.38597
G01 X67.00242 Y60.42026
G01 X67.00161 Y60.42087
G01 X66.99330 Y60.44083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.98490 Y60.42117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.98490 Y60.42117
G01 X66.98490 Y60.42115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.92582 Y60.38092 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.92582 Y60.38092
G01 X66.98490 Y60.42115
G01 X67.00245 Y60.42026
G01 X67.04954 Y60.38597
G01 X67.05833 Y60.37965
G01 X67.10519 Y60.34630
G01 X67.20143 Y60.26717
G01 X67.25226 Y60.21866
G01 X67.25551 Y60.21561
G01 X67.27494 Y60.19725
G01 X67.31446 Y60.15696
G01 X67.37090 Y60.09473
G01 X67.41954 Y60.04609
G01 X67.46389 Y60.00588
G01 X67.54847 Y59.94053
G01 X67.60506 Y59.90108
G01 X67.61571 Y59.89443
G01 X67.65480 Y59.87403
G01 X67.75233 Y59.82313
G01 X67.78330 Y59.80794
G01 X67.81598 Y59.79677
G01 X67.96295 Y59.75061
G01 X67.97524 Y59.74780
G01 X68.04311 Y59.73568
G01 X68.14916 Y59.72206
G01 X68.20892 Y59.71912
G01 X68.27771 Y59.71912
G01 X68.33747 Y59.72206
G01 X68.44354 Y59.73568
G01 X68.51139 Y59.74780
G01 X68.52368 Y59.75061
G01 X68.67067 Y59.79677
G01 X68.70331 Y59.80792
G01 X68.73430 Y59.82313
G01 X68.87090 Y59.89440
G01 X68.88157 Y59.90111
G01 X68.93813 Y59.94053
G01 X69.02279 Y60.00591
G01 X69.06709 Y60.04609
G01 X69.11575 Y60.09473
G01 X69.17214 Y60.15696
G01 X69.23153 Y60.21528
G01 X69.25510 Y60.23593
G01 X69.28751 Y60.26596
G01 X69.30143 Y60.27965
G01 X69.42586 Y60.38097
G01 X69.48492 Y60.42117
G01 X69.48527 Y60.42143
G01 X69.49332 Y60.44083
G01 X69.49332 Y61.64614
G01 X69.48504 Y61.66618
G01 X69.48421 Y61.66677
G01 X69.48421 Y61.66679
G01 X69.43711 Y61.70108
G01 X69.42830 Y61.70741
G01 X69.38146 Y61.74076
G01 X69.28522 Y61.81988
G01 X69.23440 Y61.86839
G01 X69.23115 Y61.87144
G01 X69.21169 Y61.88980
G01 X69.17214 Y61.93009
G01 X69.11575 Y61.99232
G01 X69.06709 Y62.04096
G01 X69.02276 Y62.08114
G01 X68.94926 Y62.13794
G01 X68.93818 Y62.14652
G01 X68.88157 Y62.18594
G01 X68.87090 Y62.19262
G01 X68.73430 Y62.26392
G01 X68.70331 Y62.27913
G01 X68.67067 Y62.29028
G01 X68.52368 Y62.33644
G01 X68.51139 Y62.33926
G01 X68.44354 Y62.35137
G01 X68.33747 Y62.36499
G01 X68.27771 Y62.36793
G01 X68.20892 Y62.36793
G01 X68.14916 Y62.36499
G01 X68.04311 Y62.35137
G01 X67.97524 Y62.33926
G01 X67.96295 Y62.33644
G01 X67.81598 Y62.29028
G01 X67.78327 Y62.27911
G01 X67.75233 Y62.26392
G01 X67.61573 Y62.19265
G01 X67.60506 Y62.18597
G01 X67.54847 Y62.14652
G01 X67.46389 Y62.08117
G01 X67.41954 Y62.04096
G01 X67.37090 Y61.99232
G01 X67.31446 Y61.93009
G01 X67.25510 Y61.87177
G01 X67.23143 Y61.85102
G01 X67.19915 Y61.82110
G01 X67.18502 Y61.80728
G01 X67.06077 Y61.70608
G01 X67.00174 Y61.66588
G01 X66.98421 Y61.66677
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.00171 Y61.66588 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.00171 Y61.66588
G01 X67.00138 Y61.66565
G01 X66.99330 Y61.64614
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.58897 Y61.84284 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.58897 Y61.84284
G01 X64.58000 Y61.82602
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.57822 Y61.84451 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.57822 Y61.84451
G01 X64.58897 Y61.84284
G01 X64.60451 Y61.85056
G01 X64.62481 Y61.86087
G01 X64.71259 Y61.90667
G01 X64.84794 Y61.99460
G01 X64.85813 Y62.00281
G01 X64.86704 Y62.00984
G01 X64.91632 Y62.04492
G01 X64.95005 Y62.07047
G01 X65.04848 Y62.14652
G01 X65.10507 Y62.18594
G01 X65.11576 Y62.19265
G01 X65.25231 Y62.26389
G01 X65.28327 Y62.27913
G01 X65.31599 Y62.29028
G01 X65.46295 Y62.33644
G01 X65.47527 Y62.33926
G01 X65.54312 Y62.35137
G01 X65.64916 Y62.36499
G01 X65.70893 Y62.36793
G01 X65.77774 Y62.36793
G01 X65.83750 Y62.36499
G01 X65.94355 Y62.35137
G01 X66.01137 Y62.33926
G01 X66.02371 Y62.33644
G01 X66.17065 Y62.29028
G01 X66.20331 Y62.27913
G01 X66.23433 Y62.26392
G01 X66.37090 Y62.19262
G01 X66.38157 Y62.18594
G01 X66.43819 Y62.14652
G01 X66.44924 Y62.13794
G01 X66.52277 Y62.08117
G01 X66.56712 Y62.04096
G01 X66.61578 Y61.99227
G01 X66.67212 Y61.93011
G01 X66.71180 Y61.88968
G01 X66.73115 Y61.87141
G01 X66.73450 Y61.86824
G01 X66.78518 Y61.81990
G01 X66.88144 Y61.74078
G01 X66.92826 Y61.70743
G01 X66.93707 Y61.70111
G01 X66.98421 Y61.66679
G01 X66.98421 Y61.66677
G01 X66.98505 Y61.66618
G01 X66.99330 Y61.64614
G01 X66.99330 Y60.44083
G01 X66.98528 Y60.42143
G01 X66.98490 Y60.42117
G01 X66.92582 Y60.38092
G01 X66.80156 Y60.27977
G01 X66.78746 Y60.26593
G01 X66.75520 Y60.23603
G01 X66.73151 Y60.21531
G01 X66.67212 Y60.15694
G01 X66.61578 Y60.09478
G01 X66.56712 Y60.04609
G01 X66.52277 Y60.00591
G01 X66.43816 Y59.94053
G01 X66.38157 Y59.90111
G01 X66.37090 Y59.89440
G01 X66.23433 Y59.82313
G01 X66.20331 Y59.80792
G01 X66.17065 Y59.79677
G01 X66.02371 Y59.75061
G01 X66.01137 Y59.74780
G01 X65.94355 Y59.73568
G01 X65.83750 Y59.72206
G01 X65.77774 Y59.71912
G01 X65.70893 Y59.71912
G01 X65.64914 Y59.72206
G01 X65.54312 Y59.73568
G01 X65.47527 Y59.74780
G01 X65.46293 Y59.75061
G01 X65.31599 Y59.79677
G01 X65.28330 Y59.80792
G01 X65.25231 Y59.82316
G01 X65.15483 Y59.87403
G01 X65.11574 Y59.89443
G01 X65.10507 Y59.90111
G01 X65.04848 Y59.94053
G01 X64.95033 Y60.01637
G01 X64.91632 Y60.04213
G01 X64.90476 Y60.05036
G01 X64.89592 Y60.05722
G01 X64.85986 Y60.08567
G01 X64.72333 Y60.17233
G01 X64.71063 Y60.17876
G01 X64.66382 Y60.20421
G01 X64.62539 Y60.22648
G01 X64.59003 Y60.24591
G01 X64.57738 Y60.24531
G01 X64.57863 Y60.24660
G01 X64.58002 Y60.26090
G01 X64.57807 Y60.27081
G01 X64.56735 Y60.31851
G01 X64.55280 Y60.37662
G01 X64.53517 Y60.46501
G01 X64.51045 Y60.63164
G01 X64.50248 Y60.71259
G01 X64.49430 Y60.87921
G01 X64.49333 Y60.91853
G01 X64.49333 Y61.16854
G01 X64.49430 Y61.20784
G01 X64.50248 Y61.37446
G01 X64.51045 Y61.45541
G01 X64.53517 Y61.62204
G01 X64.55280 Y61.71043
G01 X64.56735 Y61.76852
G01 X64.57807 Y61.81624
G01 X64.58000 Y61.82602
G01 X64.57822 Y61.84451
G01 X64.56014 Y61.86372
G01 X64.54685 Y61.87759
G01 X64.48767 Y61.93839
G01 X64.45092 Y61.97845
G01 X64.39953 Y62.03806
G01 X64.38975 Y62.04962
G01 X64.36748 Y62.07654
G01 X64.36319 Y62.08167
G01 X64.32247 Y62.12998
G01 X64.31576 Y62.13806
G01 X64.29138 Y62.16786
G01 X64.26885 Y62.19407
G01 X64.24274 Y62.21652
G01 X64.20482 Y62.24756
G01 X64.17449 Y62.27101
G01 X64.14756 Y62.28599
G01 X64.10423 Y62.30888
G01 X64.06654 Y62.32737
G01 X64.04091 Y62.33545
G01 X63.99392 Y62.34931
G01 X63.94734 Y62.36133
G01 X63.94287 Y62.36186
G01 X63.92653 Y62.36359
G01 X63.88285 Y62.36768
G01 X63.87774 Y62.36793
G01 X63.84332 Y62.36877
G01 X62.64333 Y62.36877
G01 X62.60891 Y62.36793
G01 X62.60378 Y62.36768
G01 X62.56012 Y62.36359
G01 X62.55448 Y62.36303
G01 X62.53934 Y62.36133
G01 X62.49273 Y62.34931
G01 X62.44574 Y62.33545
G01 X62.42009 Y62.32737
G01 X62.38242 Y62.30888
G01 X62.33908 Y62.28599
G01 X62.31216 Y62.27101
G01 X62.28183 Y62.24756
G01 X62.24391 Y62.21652
G01 X62.21780 Y62.19407
G01 X62.19527 Y62.16786
G01 X62.16423 Y62.12993
G01 X62.14086 Y62.09968
G01 X62.12595 Y62.07291
G01 X62.10304 Y62.02955
G01 X62.08447 Y61.99176
G01 X62.07640 Y61.96610
G01 X62.06253 Y61.91911
G01 X62.05052 Y61.87251
G01 X62.04825 Y61.85173
G01 X62.04417 Y61.80809
G01 X62.04391 Y61.80293
G01 X62.04307 Y61.76854
G01 X62.04307 Y60.31853
G01 X62.04391 Y60.28412
G01 X62.04417 Y60.27899
G01 X62.04825 Y60.23532
G01 X62.05052 Y60.21452
G01 X62.06253 Y60.16794
G01 X62.07640 Y60.12095
G01 X62.08447 Y60.09532
G01 X62.10304 Y60.05750
G01 X62.12595 Y60.01414
G01 X62.12816 Y60.00997
G01 X62.14086 Y59.98734
G01 X62.16423 Y59.95712
G01 X62.16705 Y59.95369
G01 X62.19527 Y59.91919
G01 X62.21777 Y59.89301
G01 X62.24391 Y59.87053
G01 X62.28183 Y59.83949
G01 X62.31216 Y59.81604
G01 X62.33908 Y59.80106
G01 X62.38242 Y59.77817
G01 X62.42009 Y59.75968
G01 X62.44574 Y59.75161
G01 X62.49273 Y59.73774
G01 X62.53936 Y59.72572
G01 X62.56012 Y59.72346
G01 X62.60378 Y59.71937
G01 X62.60891 Y59.71912
G01 X62.64333 Y59.71828
G01 X63.84332 Y59.71828
G01 X63.87774 Y59.71912
G01 X63.88287 Y59.71937
G01 X63.92653 Y59.72346
G01 X63.94729 Y59.72572
G01 X63.99392 Y59.73774
G01 X64.04091 Y59.75161
G01 X64.06656 Y59.75968
G01 X64.10423 Y59.77817
G01 X64.14756 Y59.80106
G01 X64.17449 Y59.81604
G01 X64.20482 Y59.83949
G01 X64.24274 Y59.87053
G01 X64.26885 Y59.89298
G01 X64.29138 Y59.91919
G01 X64.31576 Y59.94899
G01 X64.32247 Y59.95707
G01 X64.36753 Y60.01051
G01 X64.38925 Y60.03515
G01 X64.40118 Y60.04810
G01 X64.43133 Y60.08282
G01 X64.45216 Y60.10825
G01 X64.48744 Y60.14873
G01 X64.55676 Y60.22366
G01 X64.57738 Y60.24531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.58002 Y60.26090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.58002 Y60.26090
G01 X64.58724 Y60.24749
G01 X64.59003 Y60.24591
G01 X64.59006 Y60.24594
G01 X64.62539 Y60.22648
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.32633 Y54.40132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.32633 Y54.40132
G01 X63.32633 Y54.49756
G01 X63.33088 Y54.54875
G01 X63.36027 Y54.65149
G01 X63.40830 Y54.74341
G01 X63.47383 Y54.82380
G01 X63.54632 Y54.88291
G01 X63.54632 Y54.85413
G01 X63.48986 Y54.80780
G01 X63.42892 Y54.73353
G01 X63.38363 Y54.64882
G01 X63.35574 Y54.55690
G01 X63.34635 Y54.46132
G01 X63.34635 Y54.40132
G01 X63.32633 Y54.40132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.49193 Y48.98673 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.49193 Y48.98673
G01 X67.51195 Y48.98673
G01 X67.51195 Y49.04672
G01 X67.52134 Y49.14230
G01 X67.54923 Y49.23423
G01 X67.59450 Y49.31894
G01 X67.65546 Y49.39321
G01 X67.71192 Y49.43954
G01 X67.71192 Y49.46831
G01 X67.63943 Y49.40921
G01 X67.57390 Y49.32882
G01 X67.52587 Y49.23689
G01 X67.49648 Y49.13415
G01 X67.49193 Y49.08297
G01 X67.49193 Y48.98673
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.59193 Y48.82671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.59193 Y48.82671
G01 X70.05497 Y48.82671
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.79337 Y49.47715 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.79337 Y49.47715
G01 X70.77610 Y49.46133
G01 X70.73561 Y49.42617
G01 X70.72616 Y49.41840
G01 X70.68725 Y49.38449
G01 X70.66523 Y49.36412
G01 X70.63279 Y49.33580
G01 X70.62055 Y49.32577
G01 X70.58898 Y49.29808
G01 X70.57382 Y49.28391
G01 X70.54509 Y49.25876
G01 X70.53191 Y49.24794
G01 X70.50361 Y49.22310
G01 X70.49104 Y49.21129
G01 X70.46373 Y49.18731
G01 X70.45009 Y49.17614
G01 X70.42281 Y49.15216
G01 X70.41021 Y49.14035
G01 X70.38194 Y49.11551
G01 X70.36874 Y49.10469
G01 X70.34001 Y49.07954
G01 X70.32484 Y49.06537
G01 X70.29327 Y49.03768
G01 X70.28105 Y49.02765
G01 X70.24859 Y48.99933
G01 X70.22657 Y48.97896
G01 X70.18766 Y48.94505
G01 X70.17824 Y48.93728
G01 X70.13775 Y48.90212
G01 X70.10186 Y48.86923
G01 X70.09693 Y48.86473
G01 X70.05497 Y48.82671
G01 X70.05431 Y48.81975
G01 X70.05192 Y48.77172
G01 X70.05192 Y47.52171
G01 X70.05431 Y47.47368
G01 X70.05959 Y47.42003
G01 X70.07824 Y47.32631
G01 X70.07869 Y47.32598
G01 X70.08078 Y47.32438
G01 X70.13150 Y47.28567
G01 X70.20574 Y47.22554
G01 X70.24933 Y47.18770
G01 X70.25141 Y47.18579
G01 X70.29127 Y47.15112
G01 X70.30709 Y47.13830
G01 X70.34819 Y47.10228
G01 X70.36175 Y47.08948
G01 X70.37140 Y47.08054
G01 X70.37181 Y47.08015
G01 X70.39990 Y47.05592
G01 X70.44163 Y47.02179
G01 X70.47196 Y46.99832
G01 X70.49873 Y46.98343
G01 X70.54641 Y46.95823
G01 X70.58438 Y46.93962
G01 X70.60963 Y46.93167
G01 X70.66134 Y46.91640
G01 X70.70221 Y46.90566
G01 X70.70849 Y46.90426
G01 X70.72883 Y46.90205
G01 X70.77590 Y46.89766
G01 X70.78253 Y46.89733
G01 X70.81692 Y46.89646
G01 X71.36693 Y46.89646
G01 X71.40132 Y46.89733
G01 X71.40793 Y46.89766
G01 X71.45502 Y46.90205
G01 X71.47534 Y46.90426
G01 X71.52251 Y46.91640
G01 X71.57422 Y46.93167
G01 X71.59944 Y46.93962
G01 X71.63744 Y46.95823
G01 X71.68512 Y46.98343
G01 X71.71189 Y46.99832
G01 X71.74222 Y47.02179
G01 X71.78395 Y47.05590
G01 X71.81016 Y47.07845
G01 X71.83274 Y47.10469
G01 X71.86685 Y47.14642
G01 X71.89032 Y47.17678
G01 X71.90516 Y47.20340
G01 X71.93035 Y47.25107
G01 X71.94905 Y47.28920
G01 X71.95705 Y47.31457
G01 X71.97229 Y47.36629
G01 X71.98440 Y47.41335
G01 X71.98659 Y47.43362
G01 X71.99101 Y47.48074
G01 X71.99134 Y47.48732
G01 X71.99218 Y47.52171
G01 X71.99218 Y48.77172
G01 X71.99134 Y48.80614
G01 X71.99101 Y48.81271
G01 X71.98659 Y48.85983
G01 X71.98440 Y48.88010
G01 X71.97229 Y48.92717
G01 X71.95705 Y48.97888
G01 X71.94905 Y49.00426
G01 X71.93035 Y49.04238
G01 X71.90516 Y49.09006
G01 X71.89032 Y49.11668
G01 X71.86680 Y49.14711
G01 X71.83266 Y49.18881
G01 X71.81016 Y49.21497
G01 X71.78405 Y49.23745
G01 X71.74232 Y49.27159
G01 X71.71189 Y49.29514
G01 X71.68512 Y49.31002
G01 X71.63744 Y49.33519
G01 X71.60813 Y49.34982
G01 X71.59942 Y49.35384
G01 X71.57422 Y49.36179
G01 X71.52251 Y49.37705
G01 X71.47536 Y49.38919
G01 X71.45888 Y49.39102
G01 X71.45502 Y49.39140
G01 X71.40790 Y49.39580
G01 X71.40132 Y49.39613
G01 X71.36693 Y49.39696
G01 X71.17143 Y49.39696
G01 X71.06035 Y49.40578
G01 X70.99916 Y49.41548
G01 X70.81692 Y49.46745
G01 X70.79337 Y49.47715
G01 X70.78740 Y49.49663
G01 X70.77958 Y49.52379
G01 X70.77183 Y49.55234
G01 X70.76180 Y49.58647
G01 X70.76012 Y49.59171
G01 X70.72680 Y49.76006
G01 X70.72436 Y49.79105
G01 X70.72218 Y49.84621
G01 X70.72218 Y50.84172
G01 X70.72134 Y50.87613
G01 X70.72101 Y50.88253
G01 X70.71656 Y50.92983
G01 X70.71438 Y50.95012
G01 X70.70229 Y50.99717
G01 X70.68702 Y51.04888
G01 X70.67905 Y51.07425
G01 X70.66035 Y51.11238
G01 X70.63516 Y51.16006
G01 X70.61956 Y51.18797
G01 X70.59828 Y51.21822
G01 X70.56881 Y51.26376
G01 X70.56574 Y51.26894
G01 X70.53152 Y51.32127
G01 X70.52855 Y51.32538
G01 X70.49744 Y51.37242
G01 X70.45129 Y51.44774
G01 X70.41971 Y51.50303
G01 X70.39891 Y51.54212
G01 X70.34438 Y51.56468
G01 X70.29282 Y51.58032
G01 X70.19861 Y51.59907
G01 X70.14496 Y51.60435
G01 X70.09693 Y51.60671
G01 X69.58195 Y51.60671
G01 X69.58128 Y51.60618
G01 X69.54692 Y51.57941
G01 X69.50430 Y51.54941
G01 X69.45345 Y51.51593
G01 X69.38342 Y51.47308
G01 X69.37905 Y51.47044
G01 X69.33579 Y51.44436
G01 X69.32591 Y51.43829
G01 X69.27555 Y51.40682
G01 X69.23148 Y51.38147
G01 X69.22873 Y51.38002
G01 X69.20196 Y51.36511
G01 X69.17163 Y51.34167
G01 X69.12988 Y51.30755
G01 X69.10366 Y51.28500
G01 X69.08111 Y51.25876
G01 X69.04700 Y51.21703
G01 X69.02350 Y51.18667
G01 X69.00867 Y51.16006
G01 X68.98347 Y51.11238
G01 X68.96475 Y51.07423
G01 X68.95680 Y51.04888
G01 X68.94154 Y50.99717
G01 X68.92947 Y50.95020
G01 X68.92762 Y50.93354
G01 X68.92726 Y50.92983
G01 X68.92282 Y50.88269
G01 X68.92249 Y50.87613
G01 X68.92167 Y50.84172
G01 X68.92167 Y49.59171
G01 X68.92249 Y49.55732
G01 X68.92282 Y49.55084
G01 X68.92376 Y49.54068
G01 X68.92383 Y49.54035
G01 X68.92726 Y49.50362
G01 X68.92947 Y49.48327
G01 X68.94154 Y49.43628
G01 X68.95289 Y49.39780
G01 X68.96668 Y49.38757
G01 X69.02932 Y49.34558
G01 X69.08322 Y49.31327
G01 X69.10191 Y49.30250
G01 X69.13191 Y49.28597
G01 X69.18002 Y49.25574
G01 X69.21547 Y49.23039
G01 X69.25731 Y49.19636
G01 X69.28929 Y49.16679
G01 X69.32856 Y49.12590
G01 X69.36460 Y49.08386
G01 X69.39409 Y49.04675
G01 X69.40514 Y49.03187
G01 X69.45832 Y48.96727
G01 X69.50722 Y48.91337
G01 X69.54692 Y48.87172
G01 X69.59193 Y48.82671
G01 X69.59193 Y47.24670
G01 X69.58253 Y47.15112
G01 X69.55464 Y47.05920
G01 X69.50933 Y46.97449
G01 X69.44842 Y46.90022
G01 X69.37417 Y46.83929
G01 X69.28946 Y46.79402
G01 X69.19754 Y46.76613
G01 X69.10194 Y46.75671
G01 X68.00194 Y46.75671
G01 X67.90631 Y46.76613
G01 X67.81441 Y46.79402
G01 X67.72970 Y46.83929
G01 X67.65546 Y46.90022
G01 X67.59450 Y46.97449
G01 X67.54923 Y47.05920
G01 X67.52134 Y47.15112
G01 X67.51195 Y47.24670
G01 X67.51195 Y47.30672
G01 X67.49193 Y47.30672
G01 X67.49193 Y47.21048
G01 X67.49648 Y47.15930
G01 X67.52587 Y47.05656
G01 X67.57390 Y46.96464
G01 X67.63943 Y46.88422
G01 X67.70651 Y46.82951
G01 X67.76204 Y46.77647
G01 X67.80859 Y46.71544
G01 X67.84177 Y46.66403
G01 X67.88804 Y46.57249
G01 X67.91428 Y46.47335
G01 X67.91929 Y46.37089
G01 X67.91583 Y46.30980
G01 X67.89947 Y46.20876
G01 X67.86724 Y46.12567
G01 X67.86364 Y46.12341
G01 X67.83608 Y46.10622
G01 X67.75911 Y46.06621
G01 X67.74829 Y46.06050
G01 X67.70067 Y46.03492
G01 X67.59780 Y45.98844
G01 X67.54387 Y45.96855
G01 X67.53057 Y45.96349
G01 X67.52147 Y45.95994
G01 X67.48111 Y45.94551
G01 X67.42696 Y45.92801
G01 X67.38187 Y45.91346
G01 X67.32719 Y45.89324
G01 X67.31766 Y45.88821
G01 X67.17954 Y45.81394
G01 X67.15975 Y45.80287
G01 X67.12256 Y45.77510
G01 X67.01022 Y45.68531
G01 X67.00072 Y45.67635
G01 X66.95299 Y45.62661
G01 X66.87006 Y45.53119
G01 X66.85007 Y45.50820
G01 X66.80186 Y45.45511
G01 X66.78749 Y45.43774
G01 X66.68868 Y45.33802
G01 X66.61622 Y45.27630
G01 X66.57890 Y45.24587
G01 X66.56664 Y45.23629
G01 X66.53638 Y45.13662
G01 X66.51992 Y45.05374
G01 X66.51992 Y44.77500
G01 X66.45635 Y44.64064
G01 X66.41672 Y44.56634
G01 X66.33359 Y44.42766
G01 X66.29442 Y44.36896
G01 X66.19999 Y44.24163
G01 X66.16001 Y44.19289
G01 X66.05457 Y44.07653
G01 X66.01172 Y44.03368
G01 X65.91540 Y43.94640
G01 X65.80641 Y43.68329
G01 X65.79778 Y43.66378
G01 X65.76661 Y43.59789
G01 X65.75030 Y43.56733
G01 X65.71396 Y43.50668
G01 X65.69796 Y43.48270
G01 X65.65663 Y43.42700
G01 X65.64040 Y43.40719
G01 X65.59425 Y43.35631
G01 X65.58579 Y43.34742
G01 X61.23924 Y39.00085
G01 X61.23035 Y38.99239
G01 X61.17945 Y38.94626
G01 X61.15964 Y38.93001
G01 X61.10393 Y38.88871
G01 X61.09233 Y38.88053
G01 X61.07833 Y38.87809
G01 X61.00972 Y38.86793
G01 X60.98427 Y38.86541
G01 X60.91567 Y38.86204
G01 X60.90337 Y38.86173
G01 X55.15038 Y38.86173
G01 X55.13808 Y38.86143
G01 X55.06945 Y38.85805
G01 X55.04398 Y38.85553
G01 X54.97537 Y38.84537
G01 X54.94713 Y38.83973
G01 X54.87852 Y38.82254
G01 X54.84532 Y38.81245
G01 X54.77672 Y38.78789
G01 X54.75685 Y38.78022
G01 X54.07240 Y38.49673
G01 X51.36832 Y38.49673
G01 X50.08866 Y37.21711
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.97622 Y39.48050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.97622 Y39.48050
G01 X50.08678 Y39.59109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.94637 Y39.57999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.94637 Y39.57999
G01 X49.94742 Y39.57933
G01 X49.96718 Y39.57933
G01 X50.08678 Y39.59109
G01 X50.12191 Y39.60773
G01 X50.20566 Y39.65241
G01 X50.34434 Y39.73554
G01 X50.41114 Y39.78012
G01 X50.50637 Y39.85073
G01 X50.53662 Y39.87204
G01 X50.53898 Y39.87362
G01 X50.59207 Y39.91263
G01 X50.59738 Y39.91690
G01 X50.65054 Y39.95594
G01 X50.70784 Y39.99422
G01 X50.72676 Y40.00646
G01 X50.77266 Y40.03521
G01 X50.79301 Y40.04837
G01 X50.83238 Y40.07468
G01 X50.90868 Y40.12033
G01 X50.93525 Y40.13452
G01 X50.97408 Y40.15642
G01 X51.00540 Y40.17496
G01 X51.00540 Y40.17499
G01 X51.01645 Y40.19152
G01 X51.09039 Y40.32983
G01 X51.12714 Y40.41857
G01 X51.17266 Y40.56866
G01 X51.18914 Y40.65144
G01 X51.18914 Y41.08245
G01 X51.20560 Y41.16528
G01 X51.23583 Y41.26495
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.14236 Y41.26505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.14236 Y41.26505
G01 X51.17266 Y41.16528
G01 X51.18914 Y41.08245
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.18914 Y40.65144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.18914 Y40.65144
G01 X51.20560 Y40.56866
G01 X51.25112 Y40.41857
G01 X51.28790 Y40.32983
G01 X51.36181 Y40.19152
G01 X51.37169 Y40.17674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.00540 Y40.17499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.00540 Y40.17499
G01 X51.00726 Y40.17608
G01 X51.02039 Y40.17671
G01 X51.37169 Y40.17674
G01 X51.44594 Y40.13694
G01 X51.60278 Y40.06274
G01 X51.67352 Y40.03336
G01 X51.83034 Y39.97725
G01 X51.88569 Y39.96041
G01 X52.04251 Y39.92114
G01 X52.08752 Y39.91217
G01 X52.24434 Y39.88891
G01 X52.28363 Y39.88502
G01 X52.44045 Y39.87732
G01 X52.47781 Y39.87732
G01 X52.63461 Y39.88502
G01 X52.67388 Y39.88888
G01 X52.83075 Y39.91217
G01 X52.87576 Y39.92114
G01 X53.03258 Y39.96041
G01 X53.08787 Y39.97722
G01 X53.24469 Y40.03336
G01 X53.31548 Y40.06274
G01 X53.47233 Y40.13694
G01 X53.54654 Y40.17671
G01 X53.55645 Y40.19152
G01 X53.63039 Y40.32983
G01 X53.66714 Y40.41857
G01 X53.71266 Y40.56866
G01 X53.72914 Y40.65144
G01 X53.72914 Y41.08245
G01 X53.74560 Y41.16528
G01 X53.77583 Y41.26495
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.68236 Y41.26505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.68236 Y41.26505
G01 X53.71266 Y41.16528
G01 X53.72914 Y41.08245
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.72914 Y40.65144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.72914 Y40.65144
G01 X53.74560 Y40.56866
G01 X53.79112 Y40.41857
G01 X53.82790 Y40.32983
G01 X53.90181 Y40.19152
G01 X53.91169 Y40.17674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.54654 Y40.17671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.54654 Y40.17671
G01 X53.91169 Y40.17674
G01 X53.98594 Y40.13694
G01 X54.14278 Y40.06274
G01 X54.21352 Y40.03336
G01 X54.37034 Y39.97725
G01 X54.42569 Y39.96041
G01 X54.58251 Y39.92114
G01 X54.62752 Y39.91217
G01 X54.78434 Y39.88891
G01 X54.82363 Y39.88502
G01 X54.98045 Y39.87732
G01 X55.01781 Y39.87732
G01 X55.17461 Y39.88502
G01 X55.21388 Y39.88888
G01 X55.37075 Y39.91217
G01 X55.41576 Y39.92114
G01 X55.57258 Y39.96041
G01 X55.62787 Y39.97722
G01 X55.78469 Y40.03336
G01 X55.85548 Y40.06274
G01 X56.01233 Y40.13694
G01 X56.08654 Y40.17671
G01 X56.09645 Y40.19152
G01 X56.17039 Y40.32983
G01 X56.20714 Y40.41857
G01 X56.25266 Y40.56866
G01 X56.26912 Y40.65144
G01 X56.26912 Y41.08245
G01 X56.25266 Y41.16528
G01 X56.22236 Y41.26505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.31583 Y41.26495 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.31583 Y41.26495
G01 X56.28560 Y41.16528
G01 X56.26912 Y41.08245
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.26912 Y40.65144 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.26912 Y40.65144
G01 X56.28560 Y40.56866
G01 X56.33112 Y40.41857
G01 X56.36790 Y40.32983
G01 X56.44181 Y40.19152
G01 X56.45169 Y40.17674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.08654 Y40.17671 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.08654 Y40.17671
G01 X56.45169 Y40.17674
G01 X56.52594 Y40.13694
G01 X56.68278 Y40.06274
G01 X56.75352 Y40.03336
G01 X56.91034 Y39.97725
G01 X56.96569 Y39.96041
G01 X57.12251 Y39.92114
G01 X57.16752 Y39.91217
G01 X57.32434 Y39.88891
G01 X57.36363 Y39.88502
G01 X57.52045 Y39.87732
G01 X57.55781 Y39.87732
G01 X57.71461 Y39.88502
G01 X57.75388 Y39.88888
G01 X57.91075 Y39.91217
G01 X57.95576 Y39.92114
G01 X58.11258 Y39.96041
G01 X58.16787 Y39.97722
G01 X58.32469 Y40.03336
G01 X58.39548 Y40.06274
G01 X58.55233 Y40.13694
G01 X58.61270 Y40.16798
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.20239 Y37.54672 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.20239 Y37.54672
G01 X57.86998 Y37.21426
G01 X57.82296 Y37.21891
G01 X57.72690 Y37.21891
G01 X57.57084 Y37.20354
G01 X57.47664 Y37.18480
G01 X57.32655 Y37.13926
G01 X57.23780 Y37.10250
G01 X57.09950 Y37.02859
G01 X57.01964 Y36.97522
G01 X56.89840 Y36.87573
G01 X56.83048 Y36.80781
G01 X56.74992 Y36.70964
G01 X56.73099 Y36.68658
G01 X56.67763 Y36.60669
G01 X56.60369 Y36.46839
G01 X56.56693 Y36.37964
G01 X56.52142 Y36.22958
G01 X56.50493 Y36.14667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.50493 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.50493 Y35.71566
G01 X56.52142 Y35.63296
G01 X56.55164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.45822 Y35.53329 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.45822 Y35.53329
G01 X56.48847 Y35.63296
G01 X56.50493 Y35.71566
G01 X56.50493 Y36.14667
G01 X56.48847 Y36.22958
G01 X56.44293 Y36.37964
G01 X56.40618 Y36.46839
G01 X56.33226 Y36.60669
G01 X56.27890 Y36.68658
G01 X56.17941 Y36.80781
G01 X56.11149 Y36.87573
G01 X55.99025 Y36.97522
G01 X55.91037 Y37.02859
G01 X55.83023 Y37.07141
G01 X55.77207 Y37.10250
G01 X55.68332 Y37.13926
G01 X55.53326 Y37.18480
G01 X55.43905 Y37.20354
G01 X55.28296 Y37.21891
G01 X55.18690 Y37.21891
G01 X55.16866 Y37.21711
G01 X55.03570 Y37.15422
G01 X54.95843 Y37.11299
G01 X54.81974 Y37.02988
G01 X54.75845 Y36.98896
G01 X54.63112 Y36.89453
G01 X54.58015 Y36.85272
G01 X54.46381 Y36.74726
G01 X54.41893 Y36.70240
G01 X54.31350 Y36.58607
G01 X54.27164 Y36.53504
G01 X54.17720 Y36.40768
G01 X54.13636 Y36.34652
G01 X54.05325 Y36.20786
G01 X54.01197 Y36.13049
G01 X53.96493 Y36.03103
G01 X53.96493 Y35.71566
G01 X53.94847 Y35.63296
G01 X53.91822 Y35.53329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.96493 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.96493 Y35.71566
G01 X53.98142 Y35.63296
G01 X54.01164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.35007 Y33.33032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.35007 Y33.33032
G01 X54.37192 Y33.33032
G01 X54.37192 Y33.25133
G01 X54.35193 Y33.25133
G01 X54.35193 Y33.31132
G01 X54.35007 Y33.33032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.15193 Y31.08974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.15193 Y31.08974
G01 X54.22439 Y31.14884
G01 X54.28998 Y31.22926
G01 X54.33798 Y31.32116
G01 X54.36737 Y31.42390
G01 X54.37192 Y31.47508
G01 X54.37192 Y31.57132
G01 X54.35193 Y31.57132
G01 X54.35193 Y31.51130
G01 X54.34253 Y31.41572
G01 X54.31464 Y31.32380
G01 X54.26935 Y31.23909
G01 X54.20842 Y31.16482
G01 X54.15193 Y31.11846
G01 X54.15193 Y31.08974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.27195 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.27195 Y31.73132
G01 X52.27195 Y33.31132
G01 X52.27380 Y33.33032
G01 X52.11101 Y33.33032
G01 X52.09397 Y33.31678
G01 X52.00228 Y33.27124
G01 X51.90309 Y33.24571
G01 X51.84256 Y33.23675
G01 X51.78305 Y33.23368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.61226 Y33.33032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.61226 Y33.33032
G01 X48.63411 Y33.33032
G01 X48.63411 Y33.25133
G01 X48.61414 Y33.25133
G01 X48.61414 Y33.31132
G01 X48.61226 Y33.33032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.41412 Y31.08974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.41412 Y31.08974
G01 X48.48661 Y31.14884
G01 X48.55214 Y31.22923
G01 X48.60017 Y31.32118
G01 X48.62956 Y31.42387
G01 X48.63411 Y31.47503
G01 X48.63411 Y31.57132
G01 X48.61414 Y31.57132
G01 X48.61414 Y31.51130
G01 X48.60472 Y31.41572
G01 X48.57683 Y31.32380
G01 X48.53157 Y31.23909
G01 X48.47061 Y31.16482
G01 X48.41412 Y31.11846
G01 X48.41412 Y31.08974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.53414 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.53414 Y31.73132
G01 X46.53414 Y33.31132
G01 X46.53602 Y33.33032
G01 X46.37325 Y33.33032
G01 X46.35626 Y33.31683
G01 X46.26452 Y33.27124
G01 X46.16530 Y33.24571
G01 X46.10478 Y33.23675
G01 X46.04526 Y33.23368
G01 X45.99451 Y33.27238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.88493 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.88493 Y35.71566
G01 X48.90142 Y35.63296
G01 X48.93164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.83822 Y35.53329 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.83822 Y35.53329
G01 X48.86847 Y35.63296
G01 X48.88493 Y35.71566
G01 X48.88493 Y36.03103
G01 X48.93197 Y36.13049
G01 X48.97325 Y36.20786
G01 X49.05636 Y36.34652
G01 X49.09720 Y36.40768
G01 X49.19164 Y36.53504
G01 X49.23350 Y36.58607
G01 X49.33893 Y36.70240
G01 X49.38381 Y36.74726
G01 X49.50015 Y36.85272
G01 X49.55112 Y36.89453
G01 X49.67845 Y36.98896
G01 X49.73974 Y37.02988
G01 X49.87843 Y37.11299
G01 X49.95570 Y37.15422
G01 X50.08866 Y37.21711
G01 X50.10690 Y37.21891
G01 X50.20296 Y37.21891
G01 X50.35905 Y37.20354
G01 X50.45326 Y37.18480
G01 X50.60332 Y37.13926
G01 X50.69207 Y37.10250
G01 X50.83037 Y37.02859
G01 X50.91025 Y36.97522
G01 X51.03149 Y36.87573
G01 X51.09941 Y36.80781
G01 X51.19890 Y36.68658
G01 X51.25226 Y36.60669
G01 X51.32618 Y36.46839
G01 X51.36293 Y36.37964
G01 X51.40847 Y36.22958
G01 X51.42493 Y36.14667
G01 X51.42493 Y35.71566
G01 X51.40847 Y35.63296
G01 X51.37822 Y35.53329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.47164 Y35.53324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.47164 Y35.53324
G01 X51.44142 Y35.63296
G01 X51.42493 Y35.71566
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.42493 Y36.14667 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.42493 Y36.14667
G01 X51.44142 Y36.22958
G01 X51.48693 Y36.37964
G01 X51.52369 Y36.46839
G01 X51.59763 Y36.60669
G01 X51.65099 Y36.68658
G01 X51.66992 Y36.70964
G01 X51.75048 Y36.80781
G01 X51.81840 Y36.87573
G01 X51.93964 Y36.97522
G01 X52.01950 Y37.02859
G01 X52.15780 Y37.10250
G01 X52.24655 Y37.13926
G01 X52.39664 Y37.18480
G01 X52.49084 Y37.20354
G01 X52.64690 Y37.21891
G01 X52.74296 Y37.21891
G01 X52.78998 Y37.21426
G01 X54.07240 Y38.49673
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.16866 Y37.21711 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.16866 Y37.21711
G01 X55.49831 Y37.54672
G01 X58.20239 Y37.54672
G01 X58.86536 Y37.82132
G01 X58.88608 Y37.82932
G01 X58.95469 Y37.85388
G01 X58.98951 Y37.86448
G01 X59.05812 Y37.88165
G01 X59.08791 Y37.88759
G01 X59.15654 Y37.89778
G01 X59.18349 Y37.90044
G01 X59.25212 Y37.90380
G01 X59.26518 Y37.90413
G01 X61.29687 Y37.90413
G01 X61.30993 Y37.90446
G01 X61.37853 Y37.90781
G01 X61.40548 Y37.91048
G01 X61.46873 Y37.91987
G01 X61.47348 Y37.92269
G01 X61.49746 Y37.93869
G01 X61.55316 Y37.98002
G01 X61.57294 Y37.99625
G01 X61.62385 Y38.04240
G01 X61.63274 Y38.05086
G01 X66.72406 Y43.14219
G01 X66.73295 Y43.15065
G01 X66.78386 Y43.19680
G01 X66.80364 Y43.21303
G01 X66.85934 Y43.25436
G01 X66.88332 Y43.27036
G01 X66.94398 Y43.30671
G01 X66.97456 Y43.32301
G01 X67.04042 Y43.35418
G01 X67.05993 Y43.36281
G01 X67.64113 Y43.60358
G01 X67.74654 Y43.59840
G01 X67.83333 Y43.59840
G01 X67.99015 Y43.60610
G01 X68.07908 Y43.61488
G01 X68.23590 Y43.63815
G01 X68.27689 Y43.64630
G01 X68.32706 Y43.66706
G01 X68.46539 Y43.74099
G01 X68.54524 Y43.79436
G01 X68.66648 Y43.89385
G01 X68.73440 Y43.96177
G01 X68.83386 Y44.08301
G01 X68.88726 Y44.16286
G01 X68.96119 Y44.30119
G01 X68.99795 Y44.38991
G01 X69.04347 Y44.54000
G01 X69.05992 Y44.62273
G01 X69.05992 Y45.05374
G01 X69.04347 Y45.13662
G01 X69.01316 Y45.23639
G01 X68.96252 Y45.27597
G01 X68.89132 Y45.33810
G01 X68.82464 Y45.40307
G01 X68.78200 Y45.44965
G01 X68.77722 Y45.45494
G01 X68.72955 Y45.50800
G01 X68.70636 Y45.53515
G01 X68.62685 Y45.62661
G01 X68.57910 Y45.67635
G01 X68.56960 Y45.68531
G01 X68.45728 Y45.77510
G01 X68.43498 Y45.79220
G01 X68.40176 Y45.81666
G01 X68.34550 Y45.86253
G01 X68.29866 Y45.90469
G01 X68.28017 Y45.92189
G01 X68.21845 Y45.98105
G01 X68.13371 Y46.07802
G01 X68.13082 Y46.08138
G01 X68.12691 Y46.13652
G01 X68.12894 Y46.19768
G01 X68.14301 Y46.29916
G01 X68.17788 Y46.39547
G01 X68.18180 Y46.40175
G01 X68.23201 Y46.48242
G01 X68.26960 Y46.53070
G01 X68.33859 Y46.60276
G01 X68.42068 Y46.65938
G01 X68.51261 Y46.69816
G01 X68.56810 Y46.71518
G01 X68.63912 Y46.73131
G01 X68.71177 Y46.73672
G01 X69.13818 Y46.73672
G01 X69.18934 Y46.74127
G01 X69.29208 Y46.77068
G01 X69.38403 Y46.81869
G01 X69.46439 Y46.88424
G01 X69.52998 Y46.96464
G01 X69.55449 Y47.01163
G01 X69.59536 Y47.07683
G01 X69.64593 Y47.13482
G01 X69.68964 Y47.17764
G01 X69.76988 Y47.24127
G01 X69.86157 Y47.28681
G01 X69.96074 Y47.31231
G01 X70.02124 Y47.32128
G01 X70.08078 Y47.32438
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.10664 Y45.23629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.10664 Y45.23629
G01 X69.05820 Y45.23391
G01 X69.01316 Y45.23639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.21845 Y45.98105 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.21845 Y45.98105
G01 X68.13379 Y46.07802
G01 X68.13371 Y46.07802
G01 X68.08822 Y46.09184
G01 X67.99404 Y46.11059
G01 X67.86364 Y46.12341
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.56664 Y45.23629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.56664 Y45.23629
G01 X66.51822 Y45.23391
G01 X66.47316 Y45.23639
G01 X66.42254 Y45.27597
G01 X66.35132 Y45.33810
G01 X66.28477 Y45.40292
G01 X66.24210 Y45.44953
G01 X66.23717 Y45.45494
G01 X66.18952 Y45.50800
G01 X66.16631 Y45.53517
G01 X66.08685 Y45.62661
G01 X66.03910 Y45.67635
G01 X66.02963 Y45.68531
G01 X65.91728 Y45.77510
G01 X65.88990 Y45.79591
G01 X65.88012 Y45.80284
G01 X65.86029 Y45.81394
G01 X65.72219 Y45.88821
G01 X65.71264 Y45.89324
G01 X65.65798 Y45.91346
G01 X65.53245 Y45.95402
G01 X65.50812 Y45.95971
G01 X65.44042 Y45.97211
G01 X65.37758 Y45.98044
G01 X65.28551 Y45.99888
G01 X65.26689 Y46.00388
G01 X65.21266 Y46.01638
G01 X65.20517 Y46.01783
G01 X65.05043 Y46.06321
G01 X64.97073 Y46.09446
G01 X64.97070 Y46.09446
G01 X64.94302 Y46.13792
G01 X64.91569 Y46.19265
G01 X64.87977 Y46.28856
G01 X64.86456 Y46.38986
G01 X64.87075 Y46.49209
G01 X64.88081 Y46.55244
G01 X64.90812 Y46.65120
G01 X64.95539 Y46.74211
G01 X64.95838 Y46.74576
G01 X64.95973 Y46.74637
G01 X64.97586 Y46.75361
G01 X65.03235 Y46.77708
G01 X65.05528 Y46.78585
G01 X65.07654 Y46.79425
G01 X65.11673 Y46.81069
G01 X65.32513 Y46.86547
G01 X65.37055 Y46.87076
G01 X65.45196 Y46.87548
G01 X65.62650 Y46.87548
G01 X65.66092 Y46.87632
G01 X65.66753 Y46.87665
G01 X65.71462 Y46.88107
G01 X65.73494 Y46.88325
G01 X65.78195 Y46.89537
G01 X65.83367 Y46.91061
G01 X65.85904 Y46.91861
G01 X65.89704 Y46.93723
G01 X65.94472 Y46.96243
G01 X65.97149 Y46.97731
G01 X66.00192 Y47.00086
G01 X66.04365 Y47.03499
G01 X66.06976 Y47.05747
G01 X66.09226 Y47.08363
G01 X66.12638 Y47.12534
G01 X66.14995 Y47.15580
G01 X66.16476 Y47.18239
G01 X66.18995 Y47.23007
G01 X66.20865 Y47.26819
G01 X66.21665 Y47.29357
G01 X66.23189 Y47.34528
G01 X66.24400 Y47.39232
G01 X66.24619 Y47.41262
G01 X66.25061 Y47.45976
G01 X66.25094 Y47.46631
G01 X66.25178 Y47.50073
G01 X66.25178 Y48.75074
G01 X66.25094 Y48.78513
G01 X66.25061 Y48.79171
G01 X66.24619 Y48.83883
G01 X66.24400 Y48.85909
G01 X66.23189 Y48.90616
G01 X66.21665 Y48.95788
G01 X66.20865 Y48.98325
G01 X66.18995 Y49.02138
G01 X66.16476 Y49.06905
G01 X66.14992 Y49.09567
G01 X66.12645 Y49.12602
G01 X66.09234 Y49.16776
G01 X66.06979 Y49.19399
G01 X66.04355 Y49.21655
G01 X66.00182 Y49.25066
G01 X65.97146 Y49.27413
G01 X65.94484 Y49.28896
G01 X65.92747 Y49.29813
G01 X65.89717 Y49.31416
G01 X65.85904 Y49.33286
G01 X65.83367 Y49.34086
G01 X65.78195 Y49.35610
G01 X65.73489 Y49.36821
G01 X65.71845 Y49.37004
G01 X65.71462 Y49.37040
G01 X65.66750 Y49.37482
G01 X65.66092 Y49.37515
G01 X65.62650 Y49.37598
G01 X65.43103 Y49.37598
G01 X65.32013 Y49.38477
G01 X65.25894 Y49.39445
G01 X65.07654 Y49.44644
G01 X65.05297 Y49.45615
G01 X65.04703 Y49.47563
G01 X65.03916 Y49.50288
G01 X65.03146 Y49.53133
G01 X65.02138 Y49.56557
G01 X65.01975 Y49.57073
G01 X64.98640 Y49.73903
G01 X64.98396 Y49.77001
G01 X64.98178 Y49.82523
G01 X64.98178 Y50.82074
G01 X64.98094 Y50.85513
G01 X64.98061 Y50.86171
G01 X64.97619 Y50.90882
G01 X64.97400 Y50.92909
G01 X64.96189 Y50.97616
G01 X64.94665 Y51.02787
G01 X64.93865 Y51.05325
G01 X64.91995 Y51.09137
G01 X64.89476 Y51.13905
G01 X64.87992 Y51.16567
G01 X64.85645 Y51.19602
G01 X64.82232 Y51.23775
G01 X64.77741 Y51.28761
G01 X64.77578 Y51.28926
G01 X64.73895 Y51.32937
G01 X64.70009 Y51.37502
G01 X64.68978 Y51.38688
G01 X64.65696 Y51.42394
G01 X64.65168 Y51.42998
G01 X64.59074 Y51.50008
G01 X64.54965 Y51.55030
G01 X64.54226 Y51.55988
G01 X64.54223 Y51.55988
G01 X64.54091 Y51.56163
G01 X64.45821 Y51.57806
G01 X64.40456 Y51.58335
G01 X64.35653 Y51.58571
G01 X63.80654 Y51.58571
G01 X63.80515 Y51.58558
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.75153 Y48.96572 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.75153 Y48.96572
G01 X61.75153 Y49.06196
G01 X61.75608 Y49.11315
G01 X61.78547 Y49.21589
G01 X61.83350 Y49.30781
G01 X61.89903 Y49.38820
G01 X61.97152 Y49.44731
G01 X61.97152 Y49.41853
G01 X61.91506 Y49.37220
G01 X61.85412 Y49.29793
G01 X61.80883 Y49.21322
G01 X61.78094 Y49.12130
G01 X61.77155 Y49.02572
G01 X61.77155 Y48.96572
G01 X61.75153 Y48.96572
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.99550 Y46.06413 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.99550 Y46.06413
G01 X62.08582 Y46.12832
G01 X63.50995 Y46.12832
G01 X63.60553 Y46.11889
G01 X63.69745 Y46.09100
G01 X63.78216 Y46.04574
G01 X63.85643 Y45.98481
G01 X63.91736 Y45.91054
G01 X63.96263 Y45.82583
G01 X63.99052 Y45.73390
G01 X63.99994 Y45.63832
G01 X63.99994 Y45.14823
G01 X63.99814 Y45.13606
G01 X63.98879 Y45.04140
G01 X63.98107 Y44.88455
G01 X63.98107 Y44.79207
G01 X63.98879 Y44.63525
G01 X63.99814 Y44.54059
G01 X63.99994 Y44.52837
G01 X63.99994 Y44.03830
G01 X63.99052 Y43.94272
G01 X63.96263 Y43.85080
G01 X63.91736 Y43.76609
G01 X63.85643 Y43.69182
G01 X63.78216 Y43.63089
G01 X63.69745 Y43.58562
G01 X63.65704 Y43.57335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.74149 Y43.36276 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.74149 Y43.36276
G01 X64.32298 Y43.94427
G01 X64.30548 Y43.96177
G01 X64.20598 Y44.08301
G01 X64.15262 Y44.16286
G01 X64.07868 Y44.30119
G01 X64.04193 Y44.38991
G01 X63.99994 Y44.52837
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.99994 Y45.14823 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.99994 Y45.14823
G01 X64.04193 Y45.28671
G01 X64.07868 Y45.37543
G01 X64.15262 Y45.51376
G01 X64.20598 Y45.59362
G01 X64.30548 Y45.71485
G01 X64.37340 Y45.78277
G01 X64.40416 Y45.80800
G01 X64.49463 Y45.88227
G01 X64.57449 Y45.93563
G01 X64.71282 Y46.00957
G01 X64.80154 Y46.04632
G01 X64.95163 Y46.09184
G01 X64.96872 Y46.09524
G01 X64.97070 Y46.09446
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.51992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.51992 Y45.05374
G01 X66.50344 Y45.13662
G01 X66.47316 Y45.23639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.95973 Y46.74637 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.95973 Y46.74637
G01 X64.88066 Y46.76210
G01 X64.82907 Y46.77774
G01 X64.74032 Y46.81450
G01 X64.69278 Y46.83992
G01 X64.64746 Y46.87020
G01 X64.61289 Y46.89329
G01 X64.57124 Y46.92748
G01 X64.50332 Y46.99539
G01 X64.46910 Y47.03708
G01 X64.41574 Y47.11693
G01 X64.39034 Y47.16448
G01 X64.35356 Y47.25323
G01 X64.33791 Y47.30482
G01 X64.31919 Y47.39903
G01 X64.31391 Y47.45270
G01 X64.31155 Y47.50070
G01 X64.31155 Y48.75071
G01 X64.31391 Y48.79874
G01 X64.31454 Y48.80570
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.85153 Y48.80573 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.85153 Y48.80573
G01 X64.31454 Y48.80570
G01 X64.36143 Y48.84822
G01 X64.39735 Y48.88114
G01 X64.43781 Y48.91630
G01 X64.44728 Y48.92407
G01 X64.48620 Y48.95795
G01 X64.50807 Y48.97822
G01 X64.54066 Y49.00664
G01 X64.55277 Y49.01660
G01 X64.58447 Y49.04436
G01 X64.59963 Y49.05854
G01 X64.62828 Y49.08363
G01 X64.64154 Y49.09450
G01 X64.66979 Y49.11932
G01 X64.68241 Y49.13115
G01 X64.70979 Y49.15521
G01 X64.72333 Y49.16631
G01 X64.75071 Y49.19036
G01 X64.76321 Y49.20210
G01 X64.79140 Y49.22686
G01 X64.80469 Y49.23776
G01 X64.83331 Y49.26285
G01 X64.84855 Y49.27710
G01 X64.88028 Y49.30486
G01 X64.89239 Y49.31480
G01 X64.92498 Y49.34324
G01 X64.94685 Y49.36349
G01 X64.98576 Y49.39740
G01 X64.99521 Y49.40517
G01 X65.03570 Y49.44032
G01 X65.05297 Y49.45615
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.54223 Y51.55988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.54223 Y51.55988
G01 X64.54043 Y51.59257
G01 X64.55612 Y51.69381
G01 X64.57177 Y51.75297
G01 X64.60817 Y51.84873
G01 X64.66369 Y51.93481
G01 X64.73588 Y52.00748
G01 X64.78330 Y52.04613
G01 X64.86656 Y52.10092
G01 X64.95920 Y52.13775
G01 X64.97672 Y52.14270
G01 X65.12681 Y52.18543
G01 X65.21843 Y52.23328
G01 X65.29879 Y52.29884
G01 X65.36435 Y52.37920
G01 X65.38889 Y52.42619
G01 X65.42976 Y52.49142
G01 X65.48033 Y52.54944
G01 X65.52404 Y52.59226
G01 X65.60433 Y52.65591
G01 X65.69610 Y52.70148
G01 X65.79531 Y52.72698
G01 X65.85582 Y52.73592
G01 X65.91518 Y52.73897
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.42633 Y54.24133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.42633 Y54.24133
G01 X65.88934 Y54.24130
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.62775 Y54.89175 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.62775 Y54.89175
G01 X66.61048 Y54.87592
G01 X66.57001 Y54.84077
G01 X66.56056 Y54.83300
G01 X66.52165 Y54.79909
G01 X66.49976 Y54.77884
G01 X66.46719 Y54.75040
G01 X66.45505 Y54.74046
G01 X66.42335 Y54.71270
G01 X66.40809 Y54.69845
G01 X66.37949 Y54.67336
G01 X66.36620 Y54.66246
G01 X66.33801 Y54.63770
G01 X66.32551 Y54.62596
G01 X66.29813 Y54.60191
G01 X66.28459 Y54.59081
G01 X66.25721 Y54.56675
G01 X66.24456 Y54.55492
G01 X66.21632 Y54.53010
G01 X66.20309 Y54.51923
G01 X66.17443 Y54.49414
G01 X66.15927 Y54.47996
G01 X66.12757 Y54.45220
G01 X66.11545 Y54.44224
G01 X66.08287 Y54.41382
G01 X66.06100 Y54.39355
G01 X66.02208 Y54.35967
G01 X66.01261 Y54.35190
G01 X65.97215 Y54.31674
G01 X65.93623 Y54.28382
G01 X65.88934 Y54.24130
G01 X65.88871 Y54.23434
G01 X65.88635 Y54.18631
G01 X65.88635 Y52.93630
G01 X65.88871 Y52.88830
G01 X65.89399 Y52.83463
G01 X65.91264 Y52.74090
G01 X65.91309 Y52.74057
G01 X65.91518 Y52.73897
G01 X65.96593 Y52.70026
G01 X66.04014 Y52.64014
G01 X66.08376 Y52.60229
G01 X66.08566 Y52.60051
G01 X66.12554 Y52.56584
G01 X66.14157 Y52.55281
G01 X66.18266 Y52.51682
G01 X66.19661 Y52.50366
G01 X66.21665 Y52.48545
G01 X66.23420 Y52.47059
G01 X66.27591 Y52.43646
G01 X66.30636 Y52.41291
G01 X66.33313 Y52.39803
G01 X66.38078 Y52.37283
G01 X66.41878 Y52.35421
G01 X66.44418 Y52.34621
G01 X66.49587 Y52.33097
G01 X66.53656 Y52.32030
G01 X66.54296 Y52.31885
G01 X66.56323 Y52.31667
G01 X66.61030 Y52.31225
G01 X66.61690 Y52.31192
G01 X66.65134 Y52.31108
G01 X67.20130 Y52.31108
G01 X67.23572 Y52.31192
G01 X67.24233 Y52.31225
G01 X67.28942 Y52.31667
G01 X67.30974 Y52.31885
G01 X67.35675 Y52.33097
G01 X67.40847 Y52.34621
G01 X67.43384 Y52.35421
G01 X67.47184 Y52.37283
G01 X67.51952 Y52.39803
G01 X67.54624 Y52.41291
G01 X67.57672 Y52.43646
G01 X67.61845 Y52.47062
G01 X67.64459 Y52.49307
G01 X67.66706 Y52.51923
G01 X67.70118 Y52.56094
G01 X67.72475 Y52.59140
G01 X67.73956 Y52.61799
G01 X67.76475 Y52.66567
G01 X67.78345 Y52.70379
G01 X67.79142 Y52.72917
G01 X67.80669 Y52.78088
G01 X67.81878 Y52.82790
G01 X67.82099 Y52.84822
G01 X67.82538 Y52.89533
G01 X67.82571 Y52.90191
G01 X67.82655 Y52.93633
G01 X67.82655 Y54.18634
G01 X67.82571 Y54.22073
G01 X67.82538 Y54.22733
G01 X67.82099 Y54.27443
G01 X67.81878 Y54.29475
G01 X67.80669 Y54.34176
G01 X67.79142 Y54.39348
G01 X67.78345 Y54.41885
G01 X67.76475 Y54.45698
G01 X67.73956 Y54.50465
G01 X67.72472 Y54.53127
G01 X67.70125 Y54.56162
G01 X67.66712 Y54.60336
G01 X67.64459 Y54.62957
G01 X67.61835 Y54.65212
G01 X67.57659 Y54.68626
G01 X67.54624 Y54.70973
G01 X67.51962 Y54.72454
G01 X67.47197 Y54.74974
G01 X67.43384 Y54.76846
G01 X67.40847 Y54.77646
G01 X67.35675 Y54.79170
G01 X67.30969 Y54.80381
G01 X67.29325 Y54.80564
G01 X67.28942 Y54.80600
G01 X67.24230 Y54.81042
G01 X67.23572 Y54.81075
G01 X67.20130 Y54.81158
G01 X67.00583 Y54.81158
G01 X66.89496 Y54.82035
G01 X66.83377 Y54.83005
G01 X66.65134 Y54.88204
G01 X66.62775 Y54.89175
G01 X66.62178 Y54.91123
G01 X66.61390 Y54.93864
G01 X66.60623 Y54.96693
G01 X66.59610 Y55.00132
G01 X66.59455 Y55.00633
G01 X66.56120 Y55.17463
G01 X66.55876 Y55.20561
G01 X66.55655 Y55.26081
G01 X66.55655 Y56.25634
G01 X66.55574 Y56.29073
G01 X66.55541 Y56.29726
G01 X66.55099 Y56.34442
G01 X66.54878 Y56.36467
G01 X66.53666 Y56.41176
G01 X66.52142 Y56.46347
G01 X66.51342 Y56.48887
G01 X66.49473 Y56.52697
G01 X66.46956 Y56.57465
G01 X66.45472 Y56.60127
G01 X66.43125 Y56.63162
G01 X66.39709 Y56.67335
G01 X66.37456 Y56.69959
G01 X66.34835 Y56.72212
G01 X66.30662 Y56.75626
G01 X66.27626 Y56.77973
G01 X66.24964 Y56.79456
G01 X66.20197 Y56.81973
G01 X66.16384 Y56.83843
G01 X66.13847 Y56.84645
G01 X66.08675 Y56.86169
G01 X66.03969 Y56.87381
G01 X66.02325 Y56.87564
G01 X66.01942 Y56.87599
G01 X65.97230 Y56.88041
G01 X65.96572 Y56.88074
G01 X65.93130 Y56.88158
G01 X65.38134 Y56.88158
G01 X65.34693 Y56.88074
G01 X65.34035 Y56.88041
G01 X65.29323 Y56.87599
G01 X65.27296 Y56.87381
G01 X65.22590 Y56.86169
G01 X65.17418 Y56.84645
G01 X65.14881 Y56.83843
G01 X65.11068 Y56.81973
G01 X65.06301 Y56.79456
G01 X65.03639 Y56.77973
G01 X65.00603 Y56.75626
G01 X64.96430 Y56.72215
G01 X64.93806 Y56.69959
G01 X64.91551 Y56.67335
G01 X64.88140 Y56.63162
G01 X64.85793 Y56.60127
G01 X64.84309 Y56.57465
G01 X64.81790 Y56.52697
G01 X64.79920 Y56.48885
G01 X64.79120 Y56.46347
G01 X64.77596 Y56.41176
G01 X64.76384 Y56.36467
G01 X64.76166 Y56.34442
G01 X64.75724 Y56.29733
G01 X64.75691 Y56.29073
G01 X64.75607 Y56.25634
G01 X64.75607 Y55.00633
G01 X64.75691 Y54.97191
G01 X64.75724 Y54.96533
G01 X64.76011 Y54.93460
G01 X64.76166 Y54.91821
G01 X64.76384 Y54.89797
G01 X64.77599 Y54.85088
G01 X64.78731 Y54.81237
G01 X64.80111 Y54.80216
G01 X64.86372 Y54.76017
G01 X64.91764 Y54.72787
G01 X64.93631 Y54.71710
G01 X64.96631 Y54.70056
G01 X65.01442 Y54.67034
G01 X65.04987 Y54.64499
G01 X65.09171 Y54.61095
G01 X65.12369 Y54.58138
G01 X65.16298 Y54.54049
G01 X65.19907 Y54.49833
G01 X65.22854 Y54.46134
G01 X65.23964 Y54.44636
G01 X65.29275 Y54.38189
G01 X65.34162 Y54.32799
G01 X65.38134 Y54.28634
G01 X65.42633 Y54.24133
G01 X65.42633 Y52.66132
G01 X65.41693 Y52.56572
G01 X65.38904 Y52.47379
G01 X65.34375 Y52.38908
G01 X65.28282 Y52.31484
G01 X65.20857 Y52.25388
G01 X65.12386 Y52.20862
G01 X65.03194 Y52.18073
G01 X64.93634 Y52.17131
G01 X63.83634 Y52.17131
G01 X63.74073 Y52.18073
G01 X63.64881 Y52.20862
G01 X63.56410 Y52.25388
G01 X63.48986 Y52.31484
G01 X63.42892 Y52.38908
G01 X63.38363 Y52.47379
G01 X63.35574 Y52.56572
G01 X63.34635 Y52.66132
G01 X63.34635 Y52.72132
G01 X63.32633 Y52.72132
G01 X63.32633 Y52.62508
G01 X63.33088 Y52.57390
G01 X63.36027 Y52.47115
G01 X63.40830 Y52.37923
G01 X63.47383 Y52.29884
G01 X63.59283 Y52.20181
G01 X63.59105 Y52.19963
G01 X63.64665 Y52.15246
G01 X63.68396 Y52.11222
G01 X63.74307 Y52.03412
G01 X63.78544 Y51.94580
G01 X63.80941 Y51.85083
G01 X63.81838 Y51.79031
G01 X63.82270 Y51.68789
G01 X63.80563 Y51.58683
G01 X63.80515 Y51.58558
G01 X63.76154 Y51.55249
G01 X63.71505 Y51.51916
G01 X63.71094 Y51.51639
G01 X63.65955 Y51.47910
G01 X63.63969 Y51.46364
G01 X63.59351 Y51.43013
G01 X63.53301 Y51.38949
G01 X63.51404 Y51.37717
G01 X63.48739 Y51.36049
G01 X63.46451 Y51.34624
G01 X63.43123 Y51.32066
G01 X63.38950 Y51.28655
G01 X63.36326 Y51.26399
G01 X63.34071 Y51.23775
G01 X63.30660 Y51.19602
G01 X63.28313 Y51.16567
G01 X63.26829 Y51.13905
G01 X63.24310 Y51.09137
G01 X63.22440 Y51.05325
G01 X63.21640 Y51.02787
G01 X63.20116 Y50.97616
G01 X63.18904 Y50.92907
G01 X63.18686 Y50.90882
G01 X63.18244 Y50.86173
G01 X63.18211 Y50.85513
G01 X63.18127 Y50.82074
G01 X63.18127 Y49.57073
G01 X63.18211 Y49.53631
G01 X63.18244 Y49.52973
G01 X63.18686 Y49.48261
G01 X63.18904 Y49.46237
G01 X63.20116 Y49.41528
G01 X63.21251 Y49.37677
G01 X63.22631 Y49.36656
G01 X63.28892 Y49.32457
G01 X63.34284 Y49.29227
G01 X63.36154 Y49.28150
G01 X63.39151 Y49.26496
G01 X63.43962 Y49.23474
G01 X63.47507 Y49.20939
G01 X63.51691 Y49.17535
G01 X63.54889 Y49.14578
G01 X63.58818 Y49.10489
G01 X63.62427 Y49.06273
G01 X63.65374 Y49.02572
G01 X63.66484 Y49.01076
G01 X63.71795 Y48.94629
G01 X63.76682 Y48.89239
G01 X63.80652 Y48.85074
G01 X63.85153 Y48.80573
G01 X63.85153 Y47.22572
G01 X63.84213 Y47.13012
G01 X63.81424 Y47.03819
G01 X63.76895 Y46.95348
G01 X63.70802 Y46.87924
G01 X63.63377 Y46.81828
G01 X63.54906 Y46.77302
G01 X63.45714 Y46.74513
G01 X63.36154 Y46.73571
G01 X62.26154 Y46.73571
G01 X62.16593 Y46.74513
G01 X62.07401 Y46.77302
G01 X61.98930 Y46.81828
G01 X61.91506 Y46.87924
G01 X61.85412 Y46.95348
G01 X61.80883 Y47.03819
G01 X61.78094 Y47.13012
G01 X61.77155 Y47.22572
G01 X61.77155 Y47.28572
G01 X61.75153 Y47.28572
G01 X61.75153 Y47.18948
G01 X61.75608 Y47.13830
G01 X61.78547 Y47.03555
G01 X61.83350 Y46.94363
G01 X61.89903 Y46.86324
G01 X61.94533 Y46.82549
G01 X62.00096 Y46.77233
G01 X62.04759 Y46.71114
G01 X62.08074 Y46.65971
G01 X62.12692 Y46.56829
G01 X62.15308 Y46.46928
G01 X62.15811 Y46.36700
G01 X62.15471 Y46.30591
G01 X62.13835 Y46.20479
G01 X62.11739 Y46.15072
G01 X62.08585 Y46.12832
G01 X61.99550 Y46.06413
G01 X61.93431 Y46.03507
G01 X61.90993 Y46.02395
G01 X61.81358 Y45.98183
G01 X61.80853 Y45.97960
G01 X61.69311 Y45.91506
G01 X61.63322 Y45.85514
G01 X61.58935 Y45.78260
G01 X61.56289 Y45.69649
G01 X61.56085 Y45.67904
G01 X61.55969 Y45.63832
G01 X61.55969 Y44.03830
G01 X61.56085 Y43.99761
G01 X61.56289 Y43.98016
G01 X61.58935 Y43.89405
G01 X61.59044 Y43.89197
G01 X61.63322 Y43.82149
G01 X61.69311 Y43.76162
G01 X61.76565 Y43.71775
G01 X61.85176 Y43.69129
G01 X61.86921 Y43.68925
G01 X61.90993 Y43.68806
G01 X63.17982 Y43.68806
G01 X63.29087 Y43.67927
G01 X63.35206 Y43.66957
G01 X63.50995 Y43.62723
G01 X63.61010 Y43.58936
G01 X63.65704 Y43.57335
G01 X63.65945 Y43.57254
G01 X63.67035 Y43.55753
G01 X63.72161 Y43.46881
G01 X63.74815 Y43.38715
G01 X63.74149 Y43.36276
G01 X63.71599 Y43.26942
G01 X63.69067 Y43.20823
G01 X63.58147 Y43.01984
G01 X63.55267 Y42.98326
G01 X63.49750 Y42.92116
G01 X60.74490 Y40.16856
G01 X60.66030 Y40.09637
G01 X60.61018 Y40.05995
G01 X60.60526 Y40.05639
G01 X60.47030 Y40.03813
G01 X60.45476 Y40.03752
G01 X60.42725 Y40.03696
G01 X59.09269 Y40.03696
G01 X58.98166 Y40.04578
G01 X58.92047 Y40.05548
G01 X58.66795 Y40.13983
G01 X58.61270 Y40.16798
G01 X58.61242 Y40.17511
G01 X58.61118 Y40.20509
G01 X58.61943 Y40.37847
G01 X58.62893 Y40.44349
G01 X58.63038 Y40.45398
G01 X58.63627 Y40.49868
G01 X58.65621 Y40.59675
G01 X58.65962 Y40.60900
G01 X58.67483 Y40.67636
G01 X58.67501 Y40.67742
G01 X58.68908 Y40.83252
G01 X58.69134 Y40.86698
G01 X58.68908 Y40.90143
G01 X58.67501 Y41.05652
G01 X58.67483 Y41.05761
G01 X58.65962 Y41.12497
G01 X58.62746 Y41.24057
G01 X58.61463 Y41.27521
G01 X58.58766 Y41.33848
G01 X58.55078 Y41.41446
G01 X58.51382 Y41.47684
G01 X58.47587 Y41.53429
G01 X58.44702 Y41.57361
G01 X58.37605 Y41.65525
G01 X58.32832 Y41.70498
G01 X58.31882 Y41.71395
G01 X58.20648 Y41.80376
G01 X58.16929 Y41.83152
G01 X58.14953 Y41.84255
G01 X58.01141 Y41.91684
G01 X58.00183 Y41.92190
G01 X57.94717 Y41.94212
G01 X57.82164 Y41.98268
G01 X57.79731 Y41.98837
G01 X57.72957 Y42.00076
G01 X57.63414 Y42.01341
G01 X57.57354 Y42.01639
G01 X57.50473 Y42.01639
G01 X57.44412 Y42.01341
G01 X57.34867 Y42.00076
G01 X57.28090 Y41.98837
G01 X57.25660 Y41.98268
G01 X57.13107 Y41.94212
G01 X57.07641 Y41.92190
G01 X57.06686 Y41.91687
G01 X56.92873 Y41.84257
G01 X56.90895 Y41.83152
G01 X56.87173 Y41.80374
G01 X56.75942 Y41.71395
G01 X56.74992 Y41.70498
G01 X56.70221 Y41.65525
G01 X56.61941 Y41.56002
G01 X56.59927 Y41.53683
G01 X56.55124 Y41.48395
G01 X56.55108 Y41.48375
G01 X56.53668 Y41.46640
G01 X56.43790 Y41.36670
G01 X56.36541 Y41.30493
G01 X56.32810 Y41.27453
G01 X56.31583 Y41.26495
G01 X56.26742 Y41.26256
G01 X56.22236 Y41.26505
G01 X56.17169 Y41.30468
G01 X56.10051 Y41.36675
G01 X56.03386 Y41.43170
G01 X55.99122 Y41.47829
G01 X55.98642 Y41.48357
G01 X55.93874 Y41.53666
G01 X55.91573 Y41.56358
G01 X55.83605 Y41.65525
G01 X55.78832 Y41.70498
G01 X55.77882 Y41.71395
G01 X55.66648 Y41.80376
G01 X55.62929 Y41.83152
G01 X55.60953 Y41.84255
G01 X55.47141 Y41.91684
G01 X55.46183 Y41.92190
G01 X55.40717 Y41.94212
G01 X55.28164 Y41.98268
G01 X55.25731 Y41.98837
G01 X55.18957 Y42.00076
G01 X55.09414 Y42.01341
G01 X55.03354 Y42.01639
G01 X54.96473 Y42.01639
G01 X54.90412 Y42.01341
G01 X54.80867 Y42.00076
G01 X54.74090 Y41.98837
G01 X54.71660 Y41.98268
G01 X54.59107 Y41.94212
G01 X54.53641 Y41.92190
G01 X54.52686 Y41.91687
G01 X54.38873 Y41.84257
G01 X54.36895 Y41.83152
G01 X54.33173 Y41.80374
G01 X54.21942 Y41.71395
G01 X54.20992 Y41.70498
G01 X54.16221 Y41.65525
G01 X54.07941 Y41.56002
G01 X54.05927 Y41.53683
G01 X54.01124 Y41.48395
G01 X54.01108 Y41.48375
G01 X53.99668 Y41.46640
G01 X53.89790 Y41.36670
G01 X53.82541 Y41.30493
G01 X53.78810 Y41.27453
G01 X53.77583 Y41.26495
G01 X53.72742 Y41.26256
G01 X53.68236 Y41.26505
G01 X53.63169 Y41.30468
G01 X53.56051 Y41.36675
G01 X53.49386 Y41.43170
G01 X53.45122 Y41.47829
G01 X53.44642 Y41.48357
G01 X53.39874 Y41.53666
G01 X53.37573 Y41.56358
G01 X53.29605 Y41.65525
G01 X53.24832 Y41.70498
G01 X53.23882 Y41.71395
G01 X53.12648 Y41.80376
G01 X53.08929 Y41.83152
G01 X53.06953 Y41.84255
G01 X52.93141 Y41.91684
G01 X52.92183 Y41.92190
G01 X52.86717 Y41.94212
G01 X52.74164 Y41.98268
G01 X52.71731 Y41.98837
G01 X52.64957 Y42.00076
G01 X52.55414 Y42.01341
G01 X52.49354 Y42.01639
G01 X52.42473 Y42.01639
G01 X52.36412 Y42.01341
G01 X52.26867 Y42.00076
G01 X52.20090 Y41.98837
G01 X52.17660 Y41.98268
G01 X52.05107 Y41.94212
G01 X51.99641 Y41.92190
G01 X51.98686 Y41.91687
G01 X51.84873 Y41.84257
G01 X51.82895 Y41.83152
G01 X51.79173 Y41.80374
G01 X51.67942 Y41.71395
G01 X51.66992 Y41.70498
G01 X51.62221 Y41.65525
G01 X51.53941 Y41.56002
G01 X51.51927 Y41.53683
G01 X51.47124 Y41.48395
G01 X51.47108 Y41.48375
G01 X51.45668 Y41.46640
G01 X51.35790 Y41.36670
G01 X51.28541 Y41.30493
G01 X51.24810 Y41.27453
G01 X51.23583 Y41.26495
G01 X51.18742 Y41.26256
G01 X51.14236 Y41.26505
G01 X51.09169 Y41.30468
G01 X51.02051 Y41.36675
G01 X50.95386 Y41.43170
G01 X50.91122 Y41.47829
G01 X50.90642 Y41.48357
G01 X50.85874 Y41.53666
G01 X50.83573 Y41.56358
G01 X50.75605 Y41.65525
G01 X50.70832 Y41.70498
G01 X50.69882 Y41.71395
G01 X50.58648 Y41.80376
G01 X50.54929 Y41.83152
G01 X50.52953 Y41.84255
G01 X50.39141 Y41.91684
G01 X50.38183 Y41.92190
G01 X50.32717 Y41.94212
G01 X50.20164 Y41.98268
G01 X50.17731 Y41.98837
G01 X50.10957 Y42.00076
G01 X50.01414 Y42.01341
G01 X49.95354 Y42.01639
G01 X49.88473 Y42.01639
G01 X49.82412 Y42.01341
G01 X49.72867 Y42.00076
G01 X49.66090 Y41.98837
G01 X49.63660 Y41.98268
G01 X49.51107 Y41.94212
G01 X49.45641 Y41.92190
G01 X49.44686 Y41.91687
G01 X49.30873 Y41.84257
G01 X49.28895 Y41.83152
G01 X49.25173 Y41.80374
G01 X49.13942 Y41.71395
G01 X49.12992 Y41.70498
G01 X49.08221 Y41.65525
G01 X49.01122 Y41.57359
G01 X48.98679 Y41.54029
G01 X48.98239 Y41.53429
G01 X48.94445 Y41.47689
G01 X48.90751 Y41.41453
G01 X48.87061 Y41.33854
G01 X48.84358 Y41.27516
G01 X48.83081 Y41.24059
G01 X48.79862 Y41.12492
G01 X48.78343 Y41.05761
G01 X48.78323 Y41.05652
G01 X48.76919 Y40.90143
G01 X48.76690 Y40.86698
G01 X48.76919 Y40.83252
G01 X48.78323 Y40.67745
G01 X48.78343 Y40.67633
G01 X48.79029 Y40.64217
G01 X48.79862 Y40.60905
G01 X48.83081 Y40.49335
G01 X48.84358 Y40.45878
G01 X48.87061 Y40.39541
G01 X48.90746 Y40.31949
G01 X48.94447 Y40.25705
G01 X48.98239 Y40.19965
G01 X49.01125 Y40.16033
G01 X49.08221 Y40.07870
G01 X49.12992 Y40.02896
G01 X49.13942 Y40.02000
G01 X49.25173 Y39.93021
G01 X49.28895 Y39.90244
G01 X49.30878 Y39.89135
G01 X49.44691 Y39.81708
G01 X49.45638 Y39.81207
G01 X49.51102 Y39.79188
G01 X49.55542 Y39.77753
G01 X49.65775 Y39.73539
G01 X49.65928 Y39.73463
G01 X49.71635 Y39.70874
G01 X49.72588 Y39.70488
G01 X49.87571 Y39.62599
G01 X49.94637 Y39.57999
G01 X49.95851 Y39.55147
G01 X49.97645 Y39.49297
G01 X49.97802 Y39.48487
G01 X49.97622 Y39.48050
G01 X49.87086 Y39.22482
G01 X49.83761 Y39.17153
G01 X49.75313 Y39.06110
G01 X49.74363 Y39.05091
G01 X49.72664 Y39.03331
G01 X47.90645 Y37.21312
G01 X47.82184 Y37.14093
G01 X47.77173 Y37.10451
G01 X47.75377 Y37.09186
G01 X47.64953 Y37.08274
G01 X47.63185 Y37.08246
G01 X47.61630 Y37.08205
G01 X47.58880 Y37.08104
G01 X47.58052 Y37.08068
G01 X47.51991 Y37.07771
G01 X47.42448 Y37.06506
G01 X47.35674 Y37.05267
G01 X47.33241 Y37.04698
G01 X47.20688 Y37.00641
G01 X47.15220 Y36.98619
G01 X47.14265 Y36.98114
G01 X47.00452 Y36.90685
G01 X46.98476 Y36.89580
G01 X46.94757 Y36.86806
G01 X46.84031 Y36.78231
G01 X46.82489 Y36.77035
G01 X46.76825 Y36.72760
G01 X46.74905 Y36.71355
G01 X46.69723 Y36.67692
G01 X46.63292 Y36.63580
G01 X46.55128 Y36.58866
G01 X46.49243 Y36.55955
G01 X46.49050 Y36.55861
G01 X46.42997 Y36.56941
G01 X46.37120 Y36.58637
G01 X46.36543 Y36.58861
G01 X46.36495 Y36.58935
G01 X46.27501 Y36.73128
G01 X46.36495 Y36.58937
G01 X46.36495 Y36.24134
G01 X46.36490 Y36.24111
G01 X46.36490 Y36.24106
G01 X46.36312 Y36.22912
G01 X46.35375 Y36.13428
G01 X46.34605 Y35.97743
G01 X46.34605 Y35.88510
G01 X46.35375 Y35.72829
G01 X46.36312 Y35.63347
G01 X46.36490 Y35.62143
G01 X46.36492 Y35.26679
G01 X46.27673 Y35.13126
G01 X46.26726 Y35.11185
G01 X46.23627 Y35.05417
G01 X46.17813 Y34.95590
G01 X46.15164 Y34.91449
G01 X46.10945 Y34.87081
G01 X45.87493 Y34.82580
G01 X44.27491 Y34.82580
G01 X44.04039 Y34.87081
G01 X43.99820 Y34.91447
G01 X43.98477 Y34.93466
G01 X43.95436 Y34.98699
G01 X43.92789 Y35.07314
G01 X43.92584 Y35.09062
G01 X43.92467 Y35.13126
G01 X43.92467 Y36.73128
G01 X43.92584 Y36.77192
G01 X43.92789 Y36.78942
G01 X43.95436 Y36.87555
G01 X43.99820 Y36.94807
G01 X44.05812 Y37.00799
G01 X44.13066 Y37.05185
G01 X44.21674 Y37.07830
G01 X44.23422 Y37.08033
G01 X44.27491 Y37.08152
G01 X45.87493 Y37.08152
G01 X45.91562 Y37.08033
G01 X45.93310 Y37.07830
G01 X46.01920 Y37.05183
G01 X46.07618 Y37.01843
G01 X46.09167 Y37.00801
G01 X46.15164 Y36.94807
G01 X46.17811 Y36.90669
G01 X46.21737 Y36.84030
G01 X46.23858 Y36.80194
G01 X46.27501 Y36.73128
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.49243 Y36.55955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.49243 Y36.55955
G01 X46.44369 Y36.46839
G01 X46.40693 Y36.37964
G01 X46.36490 Y36.24111
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.36490 Y35.62143 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.36490 Y35.62143
G01 X46.40693 Y35.48287
G01 X46.44369 Y35.39412
G01 X46.49202 Y35.30370
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.36495 Y35.26679 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.36495 Y35.26679
G01 X46.36492 Y35.26679
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.27673 Y35.13126 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.27673 Y35.13126
G01 X46.36495 Y35.26679
G01 X46.37353 Y35.28000
G01 X46.38212 Y35.28361
G01 X46.48268 Y35.30291
G01 X46.49202 Y35.30370
G01 X46.54651 Y35.27411
G01 X46.54910 Y35.27269
G01 X46.63297 Y35.22684
G01 X46.74460 Y35.15364
G01 X46.76833 Y35.13504
G01 X46.77887 Y35.12694
G01 X46.82489 Y35.09219
G01 X46.84028 Y35.08023
G01 X46.94757 Y34.99448
G01 X46.98001 Y34.97007
G01 X46.98473 Y34.96674
G01 X47.00457 Y34.95567
G01 X47.14267 Y34.88140
G01 X47.15215 Y34.87639
G01 X47.16243 Y34.87218
G01 X47.20909 Y34.86364
G01 X47.36594 Y34.84038
G01 X47.42809 Y34.83423
G01 X47.58491 Y34.82653
G01 X47.64493 Y34.82653
G01 X47.80175 Y34.83423
G01 X47.86395 Y34.84038
G01 X48.02077 Y34.86364
G01 X48.06741 Y34.87220
G01 X48.07770 Y34.87639
G01 X48.08717 Y34.88140
G01 X48.22527 Y34.95567
G01 X48.24508 Y34.96674
G01 X48.28227 Y34.99448
G01 X48.39464 Y35.08429
G01 X48.40411 Y35.09326
G01 X48.45184 Y35.14299
G01 X48.53439 Y35.23794
G01 X48.55476 Y35.26141
G01 X48.60279 Y35.31429
G01 X48.60309 Y35.31465
G01 X48.61737 Y35.33187
G01 X48.71615 Y35.43154
G01 X48.78867 Y35.49331
G01 X48.82573 Y35.52354
G01 X48.83822 Y35.53329
G01 X48.88641 Y35.53570
G01 X48.93164 Y35.53324
G01 X48.98237 Y35.49359
G01 X49.05354 Y35.43151
G01 X49.12011 Y35.36664
G01 X49.16278 Y35.32003
G01 X49.16764 Y35.31467
G01 X49.21531 Y35.26161
G01 X49.23832 Y35.23466
G01 X49.31800 Y35.14299
G01 X49.36576 Y35.09326
G01 X49.37523 Y35.08429
G01 X49.48757 Y34.99448
G01 X49.52003 Y34.97004
G01 X49.52473 Y34.96674
G01 X49.54457 Y34.95567
G01 X49.68267 Y34.88140
G01 X49.69215 Y34.87639
G01 X49.70243 Y34.87218
G01 X49.74909 Y34.86364
G01 X49.90594 Y34.84038
G01 X49.96809 Y34.83423
G01 X50.12491 Y34.82653
G01 X50.18493 Y34.82653
G01 X50.34175 Y34.83423
G01 X50.40395 Y34.84038
G01 X50.56077 Y34.86364
G01 X50.60741 Y34.87220
G01 X50.61770 Y34.87639
G01 X50.62717 Y34.88140
G01 X50.76527 Y34.95567
G01 X50.78508 Y34.96674
G01 X50.82227 Y34.99448
G01 X50.93464 Y35.08429
G01 X50.94411 Y35.09326
G01 X50.99184 Y35.14299
G01 X51.07439 Y35.23794
G01 X51.09476 Y35.26141
G01 X51.14279 Y35.31429
G01 X51.14309 Y35.31465
G01 X51.15737 Y35.33187
G01 X51.25615 Y35.43154
G01 X51.32867 Y35.49331
G01 X51.36573 Y35.52354
G01 X51.37822 Y35.53329
G01 X51.42641 Y35.53570
G01 X51.47164 Y35.53324
G01 X51.52237 Y35.49359
G01 X51.59354 Y35.43151
G01 X51.66011 Y35.36664
G01 X51.70278 Y35.32003
G01 X51.70764 Y35.31467
G01 X51.75531 Y35.26161
G01 X51.77832 Y35.23466
G01 X51.85800 Y35.14299
G01 X51.90576 Y35.09326
G01 X51.91523 Y35.08429
G01 X52.02757 Y34.99448
G01 X52.06003 Y34.97004
G01 X52.06473 Y34.96674
G01 X52.08457 Y34.95567
G01 X52.22267 Y34.88140
G01 X52.23215 Y34.87639
G01 X52.24243 Y34.87218
G01 X52.28909 Y34.86364
G01 X52.44594 Y34.84038
G01 X52.50809 Y34.83423
G01 X52.66491 Y34.82653
G01 X52.72493 Y34.82653
G01 X52.88175 Y34.83423
G01 X52.94395 Y34.84038
G01 X53.10077 Y34.86364
G01 X53.14741 Y34.87220
G01 X53.15770 Y34.87639
G01 X53.16717 Y34.88140
G01 X53.30527 Y34.95567
G01 X53.32508 Y34.96674
G01 X53.36227 Y34.99448
G01 X53.47464 Y35.08429
G01 X53.48411 Y35.09326
G01 X53.53184 Y35.14299
G01 X53.61439 Y35.23794
G01 X53.63476 Y35.26141
G01 X53.68279 Y35.31429
G01 X53.68309 Y35.31465
G01 X53.69737 Y35.33187
G01 X53.79615 Y35.43154
G01 X53.86867 Y35.49331
G01 X53.90573 Y35.52354
G01 X53.91822 Y35.53329
G01 X53.96641 Y35.53570
G01 X54.01164 Y35.53324
G01 X54.06237 Y35.49359
G01 X54.13354 Y35.43151
G01 X54.20011 Y35.36664
G01 X54.24278 Y35.32003
G01 X54.24764 Y35.31467
G01 X54.29531 Y35.26161
G01 X54.31832 Y35.23466
G01 X54.39800 Y35.14299
G01 X54.44576 Y35.09326
G01 X54.45523 Y35.08429
G01 X54.56757 Y34.99448
G01 X54.60003 Y34.97004
G01 X54.60473 Y34.96674
G01 X54.62457 Y34.95567
G01 X54.76267 Y34.88140
G01 X54.77215 Y34.87639
G01 X54.78243 Y34.87218
G01 X54.82909 Y34.86364
G01 X54.98594 Y34.84038
G01 X55.04809 Y34.83423
G01 X55.20491 Y34.82653
G01 X55.26493 Y34.82653
G01 X55.42175 Y34.83423
G01 X55.48395 Y34.84038
G01 X55.64077 Y34.86364
G01 X55.68741 Y34.87220
G01 X55.69770 Y34.87639
G01 X55.70717 Y34.88140
G01 X55.84527 Y34.95567
G01 X55.86508 Y34.96674
G01 X55.90227 Y34.99448
G01 X56.01464 Y35.08429
G01 X56.02411 Y35.09326
G01 X56.07184 Y35.14299
G01 X56.15439 Y35.23794
G01 X56.17476 Y35.26141
G01 X56.22279 Y35.31429
G01 X56.22309 Y35.31465
G01 X56.23737 Y35.33187
G01 X56.33615 Y35.43154
G01 X56.40867 Y35.49331
G01 X56.44573 Y35.52354
G01 X56.45822 Y35.53329
G01 X56.50641 Y35.53570
G01 X56.55164 Y35.53324
G01 X56.60237 Y35.49359
G01 X56.67354 Y35.43151
G01 X56.74011 Y35.36664
G01 X56.78278 Y35.32003
G01 X56.78764 Y35.31467
G01 X56.83531 Y35.26161
G01 X56.85832 Y35.23466
G01 X56.93800 Y35.14299
G01 X56.98576 Y35.09326
G01 X56.99523 Y35.08429
G01 X57.10757 Y34.99448
G01 X57.14003 Y34.97004
G01 X57.14473 Y34.96674
G01 X57.16457 Y34.95567
G01 X57.30267 Y34.88140
G01 X57.31215 Y34.87639
G01 X57.32243 Y34.87218
G01 X57.36909 Y34.86364
G01 X57.52594 Y34.84038
G01 X57.58809 Y34.83423
G01 X57.74491 Y34.82653
G01 X57.80493 Y34.82653
G01 X57.96175 Y34.83423
G01 X58.02395 Y34.84038
G01 X58.18077 Y34.86364
G01 X58.22741 Y34.87220
G01 X58.23770 Y34.87639
G01 X58.24717 Y34.88140
G01 X58.38527 Y34.95567
G01 X58.40508 Y34.96674
G01 X58.44227 Y34.99448
G01 X58.55464 Y35.08429
G01 X58.56411 Y35.09326
G01 X58.61184 Y35.14299
G01 X58.69439 Y35.23794
G01 X58.71476 Y35.26141
G01 X58.76279 Y35.31429
G01 X58.76309 Y35.31465
G01 X58.77737 Y35.33187
G01 X58.87615 Y35.43154
G01 X58.94867 Y35.49331
G01 X58.98573 Y35.52354
G01 X58.99822 Y35.53329
G01 X59.04641 Y35.53570
G01 X59.09164 Y35.53324
G01 X59.14237 Y35.49359
G01 X59.21354 Y35.43151
G01 X59.28011 Y35.36664
G01 X59.32278 Y35.32003
G01 X59.32764 Y35.31467
G01 X59.37531 Y35.26161
G01 X59.39832 Y35.23466
G01 X59.47800 Y35.14299
G01 X59.52576 Y35.09326
G01 X59.53523 Y35.08429
G01 X59.64757 Y34.99448
G01 X59.68003 Y34.97004
G01 X59.68473 Y34.96674
G01 X59.70457 Y34.95567
G01 X59.84267 Y34.88140
G01 X59.85215 Y34.87639
G01 X59.86243 Y34.87218
G01 X59.90909 Y34.86364
G01 X60.06594 Y34.84038
G01 X60.12809 Y34.83423
G01 X60.28491 Y34.82653
G01 X60.34493 Y34.82653
G01 X60.50175 Y34.83423
G01 X60.56395 Y34.84038
G01 X60.72077 Y34.86364
G01 X60.76741 Y34.87220
G01 X60.77770 Y34.87639
G01 X60.78717 Y34.88140
G01 X60.92527 Y34.95567
G01 X60.94508 Y34.96674
G01 X60.98227 Y34.99448
G01 X61.09464 Y35.08429
G01 X61.10411 Y35.09326
G01 X61.15184 Y35.14299
G01 X61.23439 Y35.23794
G01 X61.25476 Y35.26141
G01 X61.30279 Y35.31429
G01 X61.30309 Y35.31465
G01 X61.31737 Y35.33187
G01 X61.41615 Y35.43154
G01 X61.48867 Y35.49331
G01 X61.52573 Y35.52354
G01 X61.53822 Y35.53329
G01 X61.58641 Y35.53570
G01 X61.63164 Y35.53324
G01 X61.68237 Y35.49359
G01 X61.75354 Y35.43151
G01 X61.82011 Y35.36664
G01 X61.86278 Y35.32003
G01 X61.86764 Y35.31467
G01 X61.91531 Y35.26161
G01 X61.93832 Y35.23466
G01 X62.01800 Y35.14299
G01 X62.06576 Y35.09326
G01 X62.07523 Y35.08429
G01 X62.18757 Y34.99448
G01 X62.22003 Y34.97004
G01 X62.22473 Y34.96674
G01 X62.24457 Y34.95567
G01 X62.38267 Y34.88140
G01 X62.39215 Y34.87639
G01 X62.40243 Y34.87218
G01 X62.44909 Y34.86364
G01 X62.60594 Y34.84038
G01 X62.66809 Y34.83423
G01 X62.82491 Y34.82653
G01 X62.88493 Y34.82653
G01 X63.04175 Y34.83423
G01 X63.10395 Y34.84038
G01 X63.26077 Y34.86364
G01 X63.30741 Y34.87220
G01 X63.31770 Y34.87639
G01 X63.32717 Y34.88140
G01 X63.46527 Y34.95567
G01 X63.48508 Y34.96674
G01 X63.52227 Y34.99448
G01 X63.63464 Y35.08429
G01 X63.64411 Y35.09326
G01 X63.69184 Y35.14299
G01 X63.76281 Y35.22463
G01 X63.79166 Y35.26395
G01 X63.82958 Y35.32135
G01 X63.86659 Y35.38378
G01 X63.90345 Y35.45971
G01 X63.93047 Y35.52308
G01 X63.94325 Y35.55765
G01 X63.97543 Y35.67335
G01 X63.99062 Y35.74066
G01 X63.99080 Y35.74172
G01 X64.00487 Y35.89681
G01 X64.00723 Y35.93336
G01 X64.00847 Y35.96608
G01 X64.01620 Y36.04769
G01 X64.02559 Y36.11010
G01 X64.02808 Y36.12562
G01 X64.04241 Y36.20954
G01 X64.07594 Y36.33679
G01 X64.07708 Y36.34106
G01 X64.12768 Y36.37957
G01 X64.17997 Y36.41132
G01 X64.27263 Y36.45503
G01 X64.37233 Y36.47852
G01 X64.47474 Y36.48079
G01 X64.53573 Y36.47573
G01 X64.63639 Y36.45663
G01 X64.64446 Y36.45325
G01 X64.64586 Y36.45119
G01 X64.64589 Y36.45119
G01 X64.73814 Y36.31911
G01 X64.75521 Y36.28919
G01 X64.78028 Y36.24810
G01 X64.78899 Y36.23468
G01 X64.85424 Y36.11063
G01 X64.85569 Y36.10708
G01 X64.85925 Y36.09852
G01 X64.86854 Y36.07662
G01 X64.88340 Y36.04391
G01 X64.92028 Y35.96799
G01 X64.95727 Y35.90555
G01 X64.99519 Y35.84815
G01 X65.02404 Y35.80883
G01 X65.09501 Y35.72719
G01 X65.14274 Y35.67746
G01 X65.15224 Y35.66849
G01 X65.18320 Y35.64373
G01 X65.26458 Y35.57868
G01 X65.30174 Y35.55094
G01 X65.32158 Y35.53987
G01 X65.36793 Y35.51493
G01 X65.45968 Y35.46560
G01 X65.46918 Y35.46057
G01 X65.52381 Y35.44038
G01 X65.64939 Y35.39979
G01 X65.67365 Y35.39410
G01 X65.74147 Y35.38170
G01 X65.83694 Y35.36903
G01 X65.89752 Y35.36606
G01 X65.96633 Y35.36606
G01 X66.02691 Y35.36903
G01 X66.12236 Y35.38170
G01 X66.19016 Y35.39410
G01 X66.21439 Y35.39979
G01 X66.34002 Y35.44038
G01 X66.39465 Y35.46057
G01 X66.40418 Y35.46560
G01 X66.54228 Y35.53987
G01 X66.56206 Y35.55094
G01 X66.59927 Y35.57868
G01 X66.71175 Y35.66860
G01 X66.71563 Y35.67228
G01 X66.72114 Y35.67741
G01 X66.77212 Y35.72450
G01 X66.79798 Y35.74728
G01 X66.84568 Y35.78729
G01 X66.85127 Y35.79196
G01 X66.99358 Y35.81340
G01 X67.01317 Y35.81437
G01 X67.04779 Y35.81523
G01 X68.88644 Y35.81523
G01 X68.99734 Y35.80644
G01 X69.05853 Y35.79676
G01 X69.08319 Y35.79245
G01 X69.16285 Y35.72508
G01 X69.17925 Y35.70903
G01 X69.19348 Y35.69552
G01 X69.21311 Y35.67741
G01 X69.21880 Y35.67210
G01 X69.22256 Y35.66854
G01 X69.30676 Y35.60121
G01 X69.33437 Y35.57797
G01 X69.38725 Y35.53105
G01 X69.39134 Y35.52740
G01 X69.43823 Y35.48521
G01 X69.50463 Y35.41795
G01 X69.56620 Y35.34810
G01 X69.61230 Y35.28988
G01 X69.61471 Y35.25666
G01 X69.61283 Y35.20134
G01 X69.60834 Y35.19544
G01 X69.56604 Y35.14363
G01 X69.50463 Y35.07284
G01 X69.42480 Y34.99255
G01 X69.38723 Y34.95983
G01 X69.38230 Y34.95549
G01 X69.33437 Y34.91297
G01 X69.30676 Y34.88970
G01 X69.22261 Y34.82245
G01 X69.21888 Y34.81891
G01 X69.21311 Y34.81353
G01 X69.16213 Y34.76646
G01 X69.13618 Y34.74360
G01 X69.08855 Y34.70362
G01 X69.08299 Y34.69900
G01 X68.94062 Y34.67756
G01 X68.92099 Y34.67660
G01 X68.88644 Y34.67573
G01 X68.43326 Y34.67573
G01 X68.39884 Y34.67490
G01 X68.36457 Y34.67319
G01 X68.33054 Y34.66817
G01 X68.26308 Y34.65473
G01 X68.22975 Y34.64640
G01 X68.19742 Y34.63482
G01 X68.13384 Y34.60848
G01 X68.10275 Y34.59379
G01 X68.07334 Y34.57614
G01 X68.01604 Y34.53786
G01 X67.98848 Y34.51744
G01 X67.96303 Y34.49433
G01 X67.93811 Y34.47063
G01 X66.68784 Y33.22034
G01 X66.60313 Y33.14808
G01 X66.55297 Y33.11163
G01 X66.31464 Y32.99268
G01 X66.24939 Y32.97147
G01 X66.23941 Y32.96954
G01 X65.78190 Y32.51204
G01 X65.76214 Y32.46431
G01 X65.74469 Y32.41907
G01 X65.72013 Y32.35047
G01 X65.69531 Y32.26891
G01 X65.67814 Y32.20030
G01 X65.66333 Y32.12606
G01 X65.65317 Y32.05745
G01 X65.64624 Y31.98737
G01 X65.64286 Y31.91874
G01 X65.64202 Y31.88430
G01 X65.64202 Y31.51130
G01 X65.54202 Y31.13708
G01 X65.54202 Y30.83564
G01 X65.58239 Y30.73315
G01 X65.60225 Y30.67196
G01 X65.63725 Y30.49853
G01 X65.63969 Y30.46754
G01 X65.64187 Y30.41234
G01 X65.64187 Y29.54913
G01 X65.63308 Y29.43825
G01 X65.62341 Y29.37707
G01 X65.59163 Y29.24869
G01 X65.59163 Y28.61377
G01 X65.63400 Y28.52421
G01 X65.66199 Y28.45680
G01 X65.71812 Y28.29998
G01 X65.73397 Y28.24786
G01 X65.77327 Y28.09101
G01 X65.78165 Y28.04890
G01 X65.80491 Y27.89208
G01 X65.80850 Y27.85573
G01 X65.81619 Y27.69894
G01 X65.81619 Y27.66445
G01 X65.80850 Y27.50760
G01 X65.80491 Y27.47125
G01 X65.78165 Y27.31443
G01 X65.77327 Y27.27237
G01 X65.73397 Y27.11553
G01 X65.71812 Y27.06341
G01 X65.67045 Y26.93016
G01 X65.65457 Y26.91266
G01 X65.61015 Y26.86823
G01 X65.49379 Y26.76277
G01 X65.44335 Y26.72139
G01 X65.39445 Y26.68512
G01 X65.29785 Y26.66092
G01 X65.23641 Y26.64867
G01 X65.07959 Y26.62541
G01 X65.02447 Y26.62000
G01 X64.86765 Y26.61228
G01 X64.81459 Y26.61228
G01 X64.65777 Y26.62000
G01 X64.60266 Y26.62541
G01 X64.44584 Y26.64867
G01 X64.38439 Y26.66092
G01 X64.22757 Y26.70024
G01 X64.15518 Y26.72223
G01 X63.99834 Y26.77834
G01 X63.90916 Y26.81540
G01 X63.87500 Y26.83158
G01 X63.79720 Y26.92635
G01 X63.74383 Y27.00623
G01 X63.66989 Y27.14456
G01 X63.63314 Y27.23331
G01 X63.58760 Y27.38334
G01 X63.57111 Y27.46610
G01 X63.57111 Y27.89713
G01 X63.55468 Y27.97996
G01 X63.50914 Y28.13005
G01 X63.47238 Y28.21880
G01 X63.39844 Y28.35713
G01 X63.34508 Y28.43696
G01 X63.24559 Y28.55822
G01 X63.17767 Y28.62612
G01 X63.05646 Y28.72561
G01 X62.97657 Y28.77900
G01 X62.83827 Y28.85294
G01 X62.74952 Y28.88967
G01 X62.66492 Y28.91532
G01 X62.58567 Y28.88961
G01 X62.49684 Y28.86881
G01 X62.46553 Y28.86213
G01 X62.40284 Y28.84994
G01 X62.33642 Y28.84003
G01 X62.26657 Y28.83279
G01 X62.25717 Y28.83188
G01 X62.24071 Y28.83041
G01 X62.21198 Y28.82840
G01 X62.20617 Y28.82812
G01 X62.11066 Y28.81550
G01 X62.04284 Y28.80308
G01 X62.01859 Y28.79736
G01 X61.89301 Y28.75677
G01 X61.83837 Y28.73658
G01 X61.82887 Y28.73158
G01 X61.69077 Y28.65733
G01 X61.67096 Y28.64623
G01 X61.63378 Y28.61847
G01 X61.52143 Y28.52871
G01 X61.51193 Y28.51969
G01 X61.46421 Y28.46996
G01 X61.39324 Y28.38835
G01 X61.36438 Y28.34900
G01 X61.32644 Y28.29160
G01 X61.28951 Y28.22921
G01 X61.27485 Y28.19906
G01 X61.25097 Y28.15411
G01 X61.22042 Y28.10125
G01 X61.21564 Y28.09287
G01 X61.18973 Y28.04666
G01 X61.12966 Y27.95507
G01 X61.07399 Y27.88134
G01 X61.02240 Y27.81857
G01 X61.02222 Y27.81837
G01 X61.01351 Y27.72970
G01 X61.01351 Y27.63364
G01 X61.02888 Y27.47755
G01 X61.04760 Y27.38334
G01 X61.09083 Y27.24090
G01 X61.09314 Y27.23331
G01 X61.12989 Y27.14456
G01 X61.20383 Y27.00623
G01 X61.25720 Y26.92635
G01 X61.33500 Y26.83158
G01 X61.36916 Y26.81540
G01 X61.45834 Y26.77834
G01 X61.61518 Y26.72223
G01 X61.68757 Y26.70024
G01 X61.84439 Y26.66092
G01 X61.90584 Y26.64867
G01 X62.06266 Y26.62541
G01 X62.11777 Y26.62000
G01 X62.27459 Y26.61228
G01 X62.32765 Y26.61228
G01 X62.48447 Y26.62000
G01 X62.53959 Y26.62541
G01 X62.69641 Y26.64867
G01 X62.75785 Y26.66092
G01 X62.91467 Y26.70024
G01 X62.98706 Y26.72223
G01 X63.14391 Y26.77834
G01 X63.23309 Y26.81540
G01 X63.26723 Y26.83153
G01 X63.87500 Y26.83158
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.26723 Y26.83153 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.26723 Y26.83153
G01 X63.34508 Y26.92635
G01 X63.39844 Y27.00623
G01 X63.47238 Y27.14456
G01 X63.50914 Y27.23331
G01 X63.55468 Y27.38334
G01 X63.57111 Y27.46610
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.57111 Y27.89713 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.57111 Y27.89713
G01 X63.58760 Y27.97996
G01 X63.63314 Y28.13005
G01 X63.66989 Y28.21880
G01 X63.74383 Y28.35713
G01 X63.79720 Y28.43696
G01 X63.89669 Y28.55822
G01 X63.96461 Y28.62612
G01 X64.00111 Y28.65609
G01 X64.00111 Y28.99591
G01 X64.00134 Y28.99624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.75125 Y29.13056 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.75125 Y29.13056
G01 X62.76372 Y29.08903
G01 X62.76392 Y29.08842
G01 X62.81318 Y29.05553
G01 X62.86072 Y29.03010
G01 X62.94947 Y28.99335
G01 X63.00106 Y28.97770
G01 X63.09527 Y28.95898
G01 X63.14891 Y28.95367
G01 X63.19694 Y28.95131
G01 X63.74693 Y28.95131
G01 X63.79496 Y28.95367
G01 X63.84861 Y28.95898
G01 X63.94282 Y28.97770
G01 X63.99440 Y28.99335
G01 X64.00134 Y28.99624
G01 X64.03870 Y29.05009
G01 X64.05709 Y29.07862
G01 X64.09156 Y29.12853
G01 X64.12227 Y29.17008
G01 X64.13989 Y29.19482
G01 X64.15879 Y29.22253
G01 X64.17180 Y29.24095
G01 X64.21366 Y29.29855
G01 X64.23154 Y29.32202
G01 X64.23497 Y29.32634
G01 X64.24144 Y29.33439
G01 X64.24685 Y29.34102
G01 X64.27032 Y29.37138
G01 X64.28516 Y29.39800
G01 X64.31035 Y29.44567
G01 X64.32905 Y29.48380
G01 X64.33705 Y29.50917
G01 X64.35229 Y29.56089
G01 X64.36440 Y29.60795
G01 X64.36659 Y29.62822
G01 X64.37101 Y29.67534
G01 X64.37134 Y29.68192
G01 X64.37218 Y29.71633
G01 X64.37218 Y30.96634
G01 X64.37134 Y31.00074
G01 X64.37101 Y31.00731
G01 X64.36659 Y31.05443
G01 X64.36440 Y31.07470
G01 X64.35229 Y31.12177
G01 X64.34093 Y31.16025
G01 X64.32714 Y31.17048
G01 X64.26453 Y31.21247
G01 X64.21061 Y31.24478
G01 X64.19194 Y31.25555
G01 X64.16194 Y31.27208
G01 X64.11383 Y31.30231
G01 X64.07837 Y31.32766
G01 X64.03654 Y31.36170
G01 X64.00456 Y31.39126
G01 X63.96527 Y31.43215
G01 X63.92925 Y31.47419
G01 X63.89974 Y31.51130
G01 X63.88871 Y31.52619
G01 X63.83550 Y31.59078
G01 X63.78663 Y31.64468
G01 X63.74693 Y31.68636
G01 X63.70195 Y31.73132
G01 X63.23885 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.70195 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.70195 Y31.73132
G01 X63.70195 Y32.93017
G01 X63.37548 Y33.25664
G01 X63.33309 Y33.24571
G01 X63.27256 Y33.23675
G01 X63.21305 Y33.23368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.78190 Y32.51204 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.78190 Y32.51204
G01 X65.78193 Y33.31132
G01 X65.77253 Y33.40690
G01 X65.74464 Y33.49883
G01 X65.69935 Y33.58353
G01 X65.63842 Y33.65780
G01 X65.58193 Y33.70416
G01 X65.58193 Y33.73291
G01 X65.65439 Y33.67381
G01 X65.71998 Y33.59339
G01 X65.76798 Y33.50149
G01 X65.80387 Y33.37602
G01 X65.81916 Y33.33093
G01 X65.82615 Y33.31323
G01 X65.87222 Y33.22435
G01 X65.92595 Y33.15829
G01 X65.93537 Y33.14668
G01 X65.97863 Y33.10340
G01 X66.05825 Y33.03891
G01 X66.14952 Y32.99238
G01 X66.23666 Y32.96901
G01 X66.23938 Y32.96952
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.07594 Y36.33679 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.07594 Y36.33679
G01 X64.06293 Y36.37964
G01 X64.02618 Y36.46839
G01 X63.95226 Y36.60669
G01 X63.89890 Y36.68658
G01 X63.79941 Y36.80781
G01 X63.73149 Y36.87573
G01 X63.70444 Y36.89790
G01 X65.17654 Y38.36999
G01 X65.48508 Y38.67855
G01 X65.50837 Y38.77151
G01 X65.53524 Y38.86054
G01 X65.59369 Y39.02386
G01 X65.61878 Y39.08462
G01 X65.69000 Y39.23519
G01 X65.71259 Y39.27753
G01 X65.79569 Y39.41621
G01 X65.81617 Y39.44687
G01 X65.91063 Y39.57423
G01 X65.93014 Y39.59800
G01 X66.03557 Y39.71433
G01 X66.05592 Y39.73468
G01 X66.17225 Y39.84011
G01 X66.19600 Y39.85962
G01 X66.32335 Y39.95408
G01 X66.35401 Y39.97456
G01 X66.49272 Y40.05766
G01 X66.53506 Y40.08024
G01 X66.68563 Y40.15147
G01 X66.74637 Y40.17656
G01 X66.90969 Y40.23501
G01 X66.99874 Y40.26188
G01 X67.09165 Y40.28517
G01 X67.80765 Y41.00112
G01 X70.96495 Y41.00112
G01 X71.01296 Y41.00348
G01 X71.08126 Y41.01019
G01 X71.17547 Y41.02893
G01 X71.24112 Y41.04885
G01 X71.32987 Y41.08560
G01 X71.39037 Y41.11796
G01 X71.47023 Y41.17133
G01 X71.52327 Y41.21484
G01 X71.55890 Y41.24715
G01 X73.46390 Y43.15215
G01 X73.49621 Y43.18778
G01 X73.53972 Y43.24082
G01 X73.59309 Y43.32068
G01 X73.62545 Y43.38118
G01 X73.66220 Y43.46993
G01 X73.68211 Y43.53558
G01 X73.70086 Y43.62979
G01 X73.70757 Y43.69809
G01 X73.70993 Y43.74610
G01 X73.70993 Y43.86385
G01 X73.74648 Y43.89385
G01 X73.81440 Y43.96177
G01 X73.89492 Y44.05989
G01 X73.91389 Y44.08301
G01 X73.96726 Y44.16286
G01 X74.04119 Y44.30119
G01 X74.07795 Y44.38991
G01 X74.12347 Y44.54000
G01 X74.13992 Y44.62273
G01 X74.13992 Y45.05374
G01 X74.12347 Y45.13662
G01 X74.09316 Y45.23639
G01 X74.04254 Y45.27597
G01 X73.97132 Y45.33810
G01 X73.90472 Y45.40299
G01 X73.86205 Y45.44958
G01 X73.85722 Y45.45494
G01 X73.80955 Y45.50800
G01 X73.78636 Y45.53515
G01 X73.70685 Y45.62661
G01 X73.65910 Y45.67635
G01 X73.64963 Y45.68531
G01 X73.53728 Y45.77510
G01 X73.50988 Y45.79593
G01 X73.50939 Y45.79629
G01 X73.50581 Y45.79885
G01 X73.48148 Y45.81617
G01 X73.41610 Y45.86868
G01 X73.36929 Y45.91087
G01 X73.35920 Y45.92009
G01 X73.34643 Y45.93200
G01 X73.30894 Y45.93469
G01 X73.28478 Y45.93586
G01 X73.17231 Y45.94996
G01 X73.16164 Y45.95214
G01 X73.14262 Y45.95631
G01 X73.12812 Y45.95971
G01 X73.06042 Y45.97208
G01 X72.96495 Y45.98475
G01 X72.90439 Y45.98773
G01 X72.83548 Y45.98773
G01 X72.77490 Y45.98475
G01 X72.67942 Y45.97208
G01 X72.61173 Y45.95971
G01 X72.58740 Y45.95402
G01 X72.46187 Y45.91346
G01 X72.40721 Y45.89324
G01 X72.39766 Y45.88821
G01 X72.25956 Y45.81394
G01 X72.23975 Y45.80287
G01 X72.20256 Y45.77510
G01 X72.09022 Y45.68531
G01 X72.08075 Y45.67635
G01 X72.03299 Y45.62661
G01 X71.95006 Y45.53119
G01 X71.93007 Y45.50820
G01 X71.88186 Y45.45511
G01 X71.86749 Y45.43774
G01 X71.76868 Y45.33802
G01 X71.69622 Y45.27630
G01 X71.65890 Y45.24587
G01 X71.64664 Y45.23629
G01 X71.59822 Y45.23391
G01 X71.55316 Y45.23639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.64664 Y45.23629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.64664 Y45.23629
G01 X71.61641 Y45.13662
G01 X71.59992 Y45.05374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.59992 Y44.62273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.59992 Y44.62273
G01 X71.61641 Y44.54000
G01 X71.66193 Y44.38991
G01 X71.69868 Y44.30119
G01 X71.77262 Y44.16286
G01 X71.82598 Y44.08301
G01 X71.91293 Y43.97706
G01 X71.81473 Y43.87884
G01 X71.13137 Y43.19548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.66372 Y35.90977 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.66372 Y35.90977
G01 X78.68020 Y35.99262
G01 X78.72574 Y36.14271
G01 X78.76250 Y36.23143
G01 X78.83641 Y36.36976
G01 X78.88978 Y36.44962
G01 X78.98927 Y36.57085
G01 X79.05719 Y36.63877
G01 X79.17842 Y36.73827
G01 X79.25830 Y36.79163
G01 X79.39661 Y36.86557
G01 X79.48535 Y36.90232
G01 X79.63542 Y36.94784
G01 X79.72963 Y36.96659
G01 X79.88571 Y36.98195
G01 X79.98177 Y36.98195
G01 X80.13783 Y36.96659
G01 X80.23204 Y36.94784
G01 X80.38213 Y36.90232
G01 X80.47087 Y36.86557
G01 X80.60918 Y36.79163
G01 X80.68904 Y36.73827
G01 X80.81027 Y36.63877
G01 X80.87819 Y36.57085
G01 X80.97768 Y36.44962
G01 X81.03105 Y36.36976
G01 X81.10499 Y36.23143
G01 X81.14174 Y36.14271
G01 X81.18726 Y35.99262
G01 X81.20374 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.20374 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.20374 Y35.47876
G01 X81.18726 Y35.39600
G01 X81.15700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.25045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.25045 Y35.29628
G01 X81.22020 Y35.39600
G01 X81.20374 Y35.47876
G01 X81.20374 Y35.90977
G01 X81.22020 Y35.99262
G01 X81.26574 Y36.14271
G01 X81.30250 Y36.23143
G01 X81.37641 Y36.36976
G01 X81.42978 Y36.44962
G01 X81.52927 Y36.57085
G01 X81.59719 Y36.63877
G01 X81.63374 Y36.66875
G01 X81.63374 Y37.85838
G01 X77.35597 Y42.13615
G01 X77.32366 Y42.17178
G01 X77.28015 Y42.22482
G01 X77.22679 Y42.30468
G01 X77.19443 Y42.36518
G01 X77.15767 Y42.45393
G01 X77.13776 Y42.51958
G01 X77.11901 Y42.61379
G01 X77.11846 Y42.61946
G01 X77.11231 Y42.68209
G01 X77.10995 Y42.73010
G01 X77.10995 Y43.86385
G01 X77.07340 Y43.89385
G01 X77.00548 Y43.96177
G01 X76.90598 Y44.08301
G01 X76.85262 Y44.16286
G01 X76.77868 Y44.30119
G01 X76.74193 Y44.38991
G01 X76.69641 Y44.54000
G01 X76.67992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.67992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.67992 Y45.05374
G01 X76.69641 Y45.13662
G01 X76.72664 Y45.23629
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.63316 Y45.23639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.63316 Y45.23639
G01 X76.66347 Y45.13662
G01 X76.67992 Y45.05374
G01 X76.67992 Y44.62273
G01 X76.66347 Y44.54000
G01 X76.61795 Y44.38991
G01 X76.58119 Y44.30119
G01 X76.50726 Y44.16286
G01 X76.45389 Y44.08301
G01 X76.43492 Y44.05989
G01 X76.35440 Y43.96177
G01 X76.28648 Y43.89385
G01 X76.24993 Y43.86385
G01 X76.24993 Y42.82405
G01 X77.98769 Y41.08629
G01 X78.02000 Y41.05065
G01 X78.06351 Y40.99762
G01 X78.11688 Y40.91776
G01 X78.14924 Y40.85726
G01 X78.18599 Y40.76851
G01 X78.20591 Y40.70285
G01 X78.22465 Y40.60864
G01 X78.23136 Y40.54034
G01 X78.23372 Y40.49231
G01 X78.23372 Y36.66877
G01 X78.27027 Y36.63877
G01 X78.33819 Y36.57085
G01 X78.43768 Y36.44962
G01 X78.49105 Y36.36976
G01 X78.56499 Y36.23143
G01 X78.60174 Y36.14271
G01 X78.64726 Y35.99262
G01 X78.66372 Y35.90977
G01 X78.66372 Y35.47876
G01 X78.64726 Y35.39600
G01 X78.61700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.66372 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.66372 Y35.47876
G01 X78.68020 Y35.39600
G01 X78.71045 Y35.29628
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.66293 Y30.96274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.66293 Y30.96274
G01 X78.66293 Y30.99146
G01 X78.71942 Y31.03782
G01 X78.78035 Y31.11209
G01 X78.82564 Y31.19680
G01 X78.85353 Y31.28872
G01 X78.86293 Y31.38430
G01 X78.86293 Y31.44432
G01 X78.88292 Y31.44432
G01 X78.88292 Y31.34808
G01 X78.87837 Y31.29690
G01 X78.84898 Y31.19416
G01 X78.80098 Y31.10226
G01 X78.73539 Y31.02184
G01 X78.66293 Y30.96274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.47317 Y29.18250 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.47317 Y29.18250
G01 X77.43537 Y29.12571
G01 X77.40116 Y29.08400
G01 X77.33324 Y29.01611
G01 X77.29158 Y28.98189
G01 X77.21170 Y28.92853
G01 X77.16415 Y28.90313
G01 X77.07540 Y28.86635
G01 X77.02382 Y28.85070
G01 X76.92961 Y28.83196
G01 X76.87596 Y28.82667
G01 X76.82793 Y28.82431
G01 X76.27794 Y28.82431
G01 X76.22991 Y28.82667
G01 X76.17627 Y28.83196
G01 X76.08206 Y28.85070
G01 X76.03047 Y28.86635
G01 X75.94172 Y28.90313
G01 X75.89418 Y28.92853
G01 X75.81429 Y28.98189
G01 X75.77264 Y29.01611
G01 X75.70472 Y29.08400
G01 X75.67050 Y29.12571
G01 X75.61714 Y29.20554
G01 X75.59174 Y29.25309
G01 X75.55496 Y29.34184
G01 X75.53931 Y29.39342
G01 X75.52059 Y29.48763
G01 X75.51531 Y29.54128
G01 X75.51295 Y29.58931
G01 X75.51295 Y30.83932
G01 X75.51531 Y30.88735
G01 X75.51597 Y30.89431
G01 X75.55793 Y30.93233
G01 X75.56286 Y30.93683
G01 X75.59875 Y30.96972
G01 X75.63924 Y31.00488
G01 X75.64868 Y31.01265
G01 X75.68760 Y31.04656
G01 X75.70959 Y31.06693
G01 X75.74205 Y31.09525
G01 X75.75427 Y31.10528
G01 X75.78587 Y31.13297
G01 X75.80103 Y31.14714
G01 X75.82976 Y31.17229
G01 X75.84294 Y31.18311
G01 X75.87124 Y31.20795
G01 X75.88381 Y31.21976
G01 X75.91112 Y31.24374
G01 X75.92473 Y31.25491
G01 X75.95204 Y31.27889
G01 X75.96461 Y31.29070
G01 X75.99291 Y31.31554
G01 X76.00609 Y31.32636
G01 X76.03482 Y31.35151
G01 X76.04998 Y31.36568
G01 X76.08158 Y31.39337
G01 X76.09379 Y31.40340
G01 X76.12626 Y31.43172
G01 X76.14825 Y31.45209
G01 X76.18716 Y31.48600
G01 X76.19661 Y31.49377
G01 X76.23710 Y31.52893
G01 X76.27299 Y31.56182
G01 X76.27794 Y31.56632
G01 X76.31985 Y31.60432
G01 X76.32057 Y31.61128
G01 X76.32293 Y31.65931
G01 X76.32293 Y32.90932
G01 X76.32057 Y32.95735
G01 X76.31528 Y33.01099
G01 X76.29656 Y33.10520
G01 X76.28092 Y33.15679
G01 X76.24414 Y33.24554
G01 X76.21874 Y33.29309
G01 X76.16537 Y33.37294
G01 X76.13116 Y33.41462
G01 X76.06324 Y33.48254
G01 X76.02158 Y33.51673
G01 X75.94170 Y33.57010
G01 X75.89415 Y33.59552
G01 X75.80540 Y33.63228
G01 X75.75382 Y33.64792
G01 X75.65961 Y33.66667
G01 X75.60596 Y33.67195
G01 X75.55793 Y33.67431
G01 X75.00794 Y33.67431
G01 X74.95991 Y33.67195
G01 X74.90627 Y33.66667
G01 X74.81206 Y33.64792
G01 X74.76047 Y33.63228
G01 X74.67172 Y33.59552
G01 X74.62418 Y33.57010
G01 X74.54429 Y33.51673
G01 X74.50264 Y33.48254
G01 X74.43472 Y33.41462
G01 X74.40050 Y33.37294
G01 X74.34714 Y33.29309
G01 X74.32174 Y33.24554
G01 X74.28496 Y33.15679
G01 X74.26931 Y33.10520
G01 X74.25059 Y33.01099
G01 X74.24531 Y32.95735
G01 X74.24295 Y32.90932
G01 X74.24295 Y31.65931
G01 X74.24531 Y31.61128
G01 X74.25059 Y31.55763
G01 X74.26931 Y31.46342
G01 X74.28496 Y31.41183
G01 X74.32174 Y31.32309
G01 X74.34714 Y31.27554
G01 X74.40050 Y31.19568
G01 X74.43472 Y31.15400
G01 X74.50264 Y31.08608
G01 X74.54429 Y31.05189
G01 X74.62418 Y30.99853
G01 X74.67172 Y30.97310
G01 X74.76047 Y30.93635
G01 X74.81206 Y30.92070
G01 X74.90627 Y30.90196
G01 X74.95991 Y30.89667
G01 X75.00794 Y30.89431
G01 X75.51597 Y30.89431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.31985 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.31985 Y31.60432
G01 X76.78295 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.57713 Y34.42001 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.57713 Y34.42001
G01 X77.44177 Y34.40667
G01 X77.34571 Y34.40667
G01 X77.18963 Y34.42204
G01 X77.09542 Y34.44078
G01 X76.94535 Y34.48630
G01 X76.85661 Y34.52306
G01 X76.71830 Y34.59699
G01 X76.63842 Y34.65036
G01 X76.51719 Y34.74985
G01 X76.44927 Y34.81777
G01 X76.34978 Y34.93901
G01 X76.29641 Y35.01886
G01 X76.22250 Y35.15719
G01 X76.18574 Y35.24591
G01 X76.14373 Y35.38429
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.14371 Y36.00418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.14371 Y36.00418
G01 X76.14373 Y36.49432
G01 X76.13433 Y36.58990
G01 X76.10644 Y36.68183
G01 X76.06116 Y36.76654
G01 X76.00022 Y36.84081
G01 X75.92598 Y36.90174
G01 X75.84124 Y36.94700
G01 X75.74932 Y36.97489
G01 X75.65374 Y36.98432
G01 X74.05374 Y36.98432
G01 X73.95814 Y36.97489
G01 X73.86621 Y36.94700
G01 X73.78151 Y36.90174
G01 X73.70726 Y36.84081
G01 X73.64633 Y36.76654
G01 X73.60104 Y36.68183
G01 X73.57315 Y36.58990
G01 X73.56373 Y36.49432
G01 X73.56373 Y34.89430
G01 X73.57315 Y34.79872
G01 X73.60104 Y34.70680
G01 X73.64633 Y34.62209
G01 X73.70726 Y34.54782
G01 X73.78151 Y34.48689
G01 X73.86621 Y34.44162
G01 X73.95814 Y34.41373
G01 X74.05374 Y34.40431
G01 X75.65374 Y34.40431
G01 X75.74932 Y34.41373
G01 X75.84124 Y34.44162
G01 X75.92598 Y34.48689
G01 X76.00022 Y34.54782
G01 X76.06116 Y34.62209
G01 X76.06669 Y34.63243
G01 X76.10644 Y34.70680
G01 X76.13433 Y34.79872
G01 X76.14373 Y34.89430
G01 X76.14373 Y35.38429
G01 X76.14193 Y35.39659
G01 X76.13255 Y35.49133
G01 X76.12486 Y35.64815
G01 X76.12486 Y35.74048
G01 X76.13255 Y35.89732
G01 X76.14193 Y35.99206
G01 X76.14371 Y36.00418
G01 X76.18574 Y36.14271
G01 X76.22250 Y36.23143
G01 X76.29641 Y36.36976
G01 X76.34978 Y36.44962
G01 X76.44927 Y36.57085
G01 X76.51719 Y36.63877
G01 X76.55374 Y36.66875
G01 X76.55374 Y40.14438
G01 X74.81597 Y41.88215
G01 X74.78366 Y41.91778
G01 X74.74015 Y41.97082
G01 X74.68679 Y42.05068
G01 X74.65443 Y42.11118
G01 X74.61767 Y42.19993
G01 X74.59776 Y42.26558
G01 X74.57901 Y42.35979
G01 X74.57231 Y42.42809
G01 X74.56995 Y42.47610
G01 X74.56995 Y43.86385
G01 X74.53340 Y43.89385
G01 X74.46548 Y43.96177
G01 X74.36598 Y44.08301
G01 X74.31262 Y44.16286
G01 X74.23868 Y44.30119
G01 X74.20193 Y44.38991
G01 X74.15641 Y44.54000
G01 X74.13992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.13992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.13992 Y45.05374
G01 X74.15641 Y45.13662
G01 X74.18664 Y45.23629
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.09316 Y45.23639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.09316 Y45.23639
G01 X74.13822 Y45.23391
G01 X74.18664 Y45.23629
G01 X74.19890 Y45.24587
G01 X74.23622 Y45.27630
G01 X74.30868 Y45.33802
G01 X74.40749 Y45.43774
G01 X74.42186 Y45.45511
G01 X74.47007 Y45.50820
G01 X74.49006 Y45.53119
G01 X74.57299 Y45.62661
G01 X74.62075 Y45.67635
G01 X74.63022 Y45.68531
G01 X74.74256 Y45.77510
G01 X74.77978 Y45.80287
G01 X74.79956 Y45.81394
G01 X74.93599 Y45.88732
G01 X74.93766 Y45.88823
G01 X74.99938 Y45.92164
G01 X75.00604 Y45.92529
G01 X75.04526 Y45.94704
G01 X75.13741 Y46.00695
G01 X75.21056 Y46.06187
G01 X75.23893 Y46.08392
G01 X75.25404 Y46.09608
G01 X75.36972 Y46.04627
G01 X75.44744 Y46.01864
G01 X75.48620 Y46.00599
G01 X75.54592 Y45.98823
G01 X75.60065 Y45.97426
G01 X75.65491 Y45.96268
G01 X75.66812 Y45.95971
G01 X75.69245 Y45.95402
G01 X75.81798 Y45.91346
G01 X75.87264 Y45.89324
G01 X75.88219 Y45.88821
G01 X76.02029 Y45.81394
G01 X76.04012 Y45.80284
G01 X76.04990 Y45.79591
G01 X76.07728 Y45.77510
G01 X76.18963 Y45.68531
G01 X76.19910 Y45.67635
G01 X76.24685 Y45.62661
G01 X76.32636 Y45.53515
G01 X76.34955 Y45.50800
G01 X76.39722 Y45.45494
G01 X76.40205 Y45.44958
G01 X76.44472 Y45.40299
G01 X76.51132 Y45.33810
G01 X76.58254 Y45.27597
G01 X76.63316 Y45.23639
G01 X76.67822 Y45.23391
G01 X76.72664 Y45.23629
G01 X76.73890 Y45.24587
G01 X76.77622 Y45.27630
G01 X76.84868 Y45.33802
G01 X76.94749 Y45.43774
G01 X76.96186 Y45.45511
G01 X77.01007 Y45.50820
G01 X77.03006 Y45.53119
G01 X77.11299 Y45.62661
G01 X77.16075 Y45.67635
G01 X77.17022 Y45.68531
G01 X77.28256 Y45.77510
G01 X77.31975 Y45.80287
G01 X77.33956 Y45.81394
G01 X77.47766 Y45.88821
G01 X77.48721 Y45.89324
G01 X77.54187 Y45.91346
G01 X77.66740 Y45.95402
G01 X77.69173 Y45.95971
G01 X77.75942 Y45.97208
G01 X77.85490 Y45.98475
G01 X77.91548 Y45.98773
G01 X77.98439 Y45.98773
G01 X78.04495 Y45.98475
G01 X78.14042 Y45.97208
G01 X78.20812 Y45.95971
G01 X78.23245 Y45.95402
G01 X78.35798 Y45.91346
G01 X78.41264 Y45.89324
G01 X78.42219 Y45.88821
G01 X78.56029 Y45.81394
G01 X78.58012 Y45.80284
G01 X78.58990 Y45.79591
G01 X78.61728 Y45.77510
G01 X78.72963 Y45.68531
G01 X78.73910 Y45.67635
G01 X78.78685 Y45.62661
G01 X78.86636 Y45.53515
G01 X78.88955 Y45.50800
G01 X78.93722 Y45.45494
G01 X78.94205 Y45.44958
G01 X78.98472 Y45.40299
G01 X79.05132 Y45.33810
G01 X79.12254 Y45.27597
G01 X79.17316 Y45.23639
G01 X79.21822 Y45.23391
G01 X79.26664 Y45.23629
G01 X79.27890 Y45.24587
G01 X79.31622 Y45.27630
G01 X79.38868 Y45.33802
G01 X79.48749 Y45.43774
G01 X79.50186 Y45.45511
G01 X79.55007 Y45.50820
G01 X79.57006 Y45.53119
G01 X79.65299 Y45.62661
G01 X79.70075 Y45.67635
G01 X79.71022 Y45.68531
G01 X79.82256 Y45.77510
G01 X79.86298 Y45.80510
G01 X79.87855 Y45.81582
G01 X79.90918 Y45.83809
G01 X79.93425 Y45.85737
G01 X80.00247 Y45.91663
G01 X80.06298 Y45.97571
G01 X80.07641 Y45.98910
G01 X80.12531 Y46.03873
G01 X80.16488 Y46.08247
G01 X80.16646 Y46.08420
G01 X80.19163 Y46.09184
G01 X80.28584 Y46.11059
G01 X80.44192 Y46.12595
G01 X80.53796 Y46.12595
G01 X80.69404 Y46.11059
G01 X80.72421 Y46.10457
G01 X80.77616 Y46.05214
G01 X80.90676 Y45.94241
G01 X80.93707 Y45.92171
G01 X80.96810 Y45.89931
G01 X80.98708 Y45.88486
G01 X81.08121 Y45.82420
G01 X81.10029 Y45.81394
G01 X81.12012 Y45.80284
G01 X81.12990 Y45.79591
G01 X81.15728 Y45.77510
G01 X81.26963 Y45.68531
G01 X81.27910 Y45.67635
G01 X81.32685 Y45.62661
G01 X81.40636 Y45.53515
G01 X81.42955 Y45.50800
G01 X81.47722 Y45.45494
G01 X81.48205 Y45.44958
G01 X81.52472 Y45.40299
G01 X81.59132 Y45.33810
G01 X81.66254 Y45.27597
G01 X81.71316 Y45.23639
G01 X81.75822 Y45.23391
G01 X81.80664 Y45.23629
G01 X81.81890 Y45.24587
G01 X81.85622 Y45.27630
G01 X81.92868 Y45.33802
G01 X82.02749 Y45.43774
G01 X82.04186 Y45.45511
G01 X82.09007 Y45.50820
G01 X82.11006 Y45.53119
G01 X82.19299 Y45.62661
G01 X82.24075 Y45.67635
G01 X82.25022 Y45.68531
G01 X82.36256 Y45.77510
G01 X82.39975 Y45.80287
G01 X82.41956 Y45.81394
G01 X82.55766 Y45.88821
G01 X82.56721 Y45.89324
G01 X82.62187 Y45.91346
G01 X82.74740 Y45.95402
G01 X82.77173 Y45.95971
G01 X82.83942 Y45.97208
G01 X82.93490 Y45.98475
G01 X82.99548 Y45.98773
G01 X83.06439 Y45.98773
G01 X83.12495 Y45.98475
G01 X83.22042 Y45.97208
G01 X83.28812 Y45.95971
G01 X83.31245 Y45.95402
G01 X83.43798 Y45.91346
G01 X83.49264 Y45.89324
G01 X83.50219 Y45.88821
G01 X83.64029 Y45.81394
G01 X83.66012 Y45.80284
G01 X83.66990 Y45.79591
G01 X83.69728 Y45.77510
G01 X83.80963 Y45.68531
G01 X83.81910 Y45.67635
G01 X83.86685 Y45.62661
G01 X83.93782 Y45.54498
G01 X83.96668 Y45.50563
G01 X84.00462 Y45.44820
G01 X84.04158 Y45.38580
G01 X84.07846 Y45.30985
G01 X84.10546 Y45.24653
G01 X84.11824 Y45.21196
G01 X84.15042 Y45.09626
G01 X84.16561 Y45.02900
G01 X84.16581 Y45.02786
G01 X84.17988 Y44.87282
G01 X84.18214 Y44.83833
G01 X84.17986 Y44.80381
G01 X84.16581 Y44.64879
G01 X84.16561 Y44.64762
G01 X84.15042 Y44.58039
G01 X84.11824 Y44.46469
G01 X84.10546 Y44.43012
G01 X84.07846 Y44.36680
G01 X84.04158 Y44.29085
G01 X84.00462 Y44.22845
G01 X83.96668 Y44.17102
G01 X83.93780 Y44.13165
G01 X83.89104 Y44.07785
G01 X83.86759 Y44.04943
G01 X83.86091 Y44.04087
G01 X83.84389 Y44.01991
G01 X83.82317 Y43.99538
G01 X83.76345 Y43.91422
G01 X83.75959 Y43.87686
G01 X83.75476 Y43.81567
G01 X83.76124 Y43.64265
G01 X83.79647 Y43.58961
G01 X83.83289 Y43.53947
G01 X83.90513 Y43.45481
G01 X87.78580 Y39.57415
G01 X87.80568 Y39.55502
G01 X87.81709 Y39.54448
G01 X87.92542 Y39.46201
G01 X87.93139 Y39.46104
G01 X87.99258 Y39.45137
G01 X88.10347 Y39.44258
G01 X88.34962 Y39.44258
G01 X88.39580 Y39.44410
G01 X88.42191 Y39.44583
G01 X88.58511 Y39.47550
G01 X88.64630 Y39.49371
G01 X88.82580 Y39.58230
G01 X88.85496 Y39.59671
G01 X88.88465 Y39.65540
G01 X88.90642 Y39.71258
G01 X88.92554 Y39.78472
G01 X88.89484 Y39.85594
G01 X88.82438 Y39.98875
G01 X88.81406 Y40.00473
G01 X88.79077 Y40.04306
G01 X88.77551 Y40.06991
G01 X88.72994 Y40.14029
G01 X88.68638 Y40.19965
G01 X88.64843 Y40.25711
G01 X88.61147 Y40.31949
G01 X88.57459 Y40.39546
G01 X88.54759 Y40.45873
G01 X88.53479 Y40.49338
G01 X88.50263 Y40.60900
G01 X88.48742 Y40.67633
G01 X88.48724 Y40.67742
G01 X88.47317 Y40.83252
G01 X88.47091 Y40.86698
G01 X88.47317 Y40.90143
G01 X88.48724 Y41.05652
G01 X88.48742 Y41.05761
G01 X88.50263 Y41.12497
G01 X88.53482 Y41.24059
G01 X88.54759 Y41.27521
G01 X88.57459 Y41.33848
G01 X88.61145 Y41.41443
G01 X88.64843 Y41.47684
G01 X88.68638 Y41.53429
G01 X88.71523 Y41.57361
G01 X88.78620 Y41.65525
G01 X88.83393 Y41.70498
G01 X88.84343 Y41.71395
G01 X88.95577 Y41.80376
G01 X88.99296 Y41.83152
G01 X89.01272 Y41.84255
G01 X89.15084 Y41.91684
G01 X89.16042 Y41.92190
G01 X89.21508 Y41.94212
G01 X89.34061 Y41.98268
G01 X89.36494 Y41.98837
G01 X89.43268 Y42.00076
G01 X89.52811 Y42.01341
G01 X89.58871 Y42.01639
G01 X89.65752 Y42.01639
G01 X89.71813 Y42.01341
G01 X89.81358 Y42.00076
G01 X89.88135 Y41.98837
G01 X89.90565 Y41.98268
G01 X90.03118 Y41.94212
G01 X90.08584 Y41.92190
G01 X90.09539 Y41.91687
G01 X90.23352 Y41.84257
G01 X90.25330 Y41.83152
G01 X90.29051 Y41.80374
G01 X90.40283 Y41.71395
G01 X90.41233 Y41.70498
G01 X90.46003 Y41.65525
G01 X90.53971 Y41.56361
G01 X90.56273 Y41.53666
G01 X90.61038 Y41.48362
G01 X90.61525 Y41.47824
G01 X90.65793 Y41.43163
G01 X90.72447 Y41.36678
G01 X90.79575 Y41.30460
G01 X90.84634 Y41.26505
G01 X90.89145 Y41.26256
G01 X90.93984 Y41.26495
G01 X90.95208 Y41.27453
G01 X90.98947 Y41.30501
G01 X91.06186 Y41.36668
G01 X91.16067 Y41.46640
G01 X91.17497 Y41.48365
G01 X91.22325 Y41.53683
G01 X91.24342 Y41.56002
G01 X91.32620 Y41.65525
G01 X91.37393 Y41.70498
G01 X91.38343 Y41.71395
G01 X91.49577 Y41.80376
G01 X91.53296 Y41.83152
G01 X91.55272 Y41.84255
G01 X91.69084 Y41.91684
G01 X91.70042 Y41.92190
G01 X91.75508 Y41.94212
G01 X91.88061 Y41.98268
G01 X91.90494 Y41.98837
G01 X91.97268 Y42.00076
G01 X92.06811 Y42.01341
G01 X92.12871 Y42.01639
G01 X92.19752 Y42.01639
G01 X92.25813 Y42.01341
G01 X92.35358 Y42.00076
G01 X92.42135 Y41.98837
G01 X92.44565 Y41.98268
G01 X92.57118 Y41.94212
G01 X92.62584 Y41.92190
G01 X92.63539 Y41.91687
G01 X92.77352 Y41.84257
G01 X92.79330 Y41.83152
G01 X92.83051 Y41.80374
G01 X92.94283 Y41.71395
G01 X92.95233 Y41.70498
G01 X93.00003 Y41.65525
G01 X93.07971 Y41.56361
G01 X93.10273 Y41.53666
G01 X93.15038 Y41.48362
G01 X93.15525 Y41.47824
G01 X93.19793 Y41.43163
G01 X93.26447 Y41.36678
G01 X93.33575 Y41.30460
G01 X93.38634 Y41.26505
G01 X93.43145 Y41.26256
G01 X93.47984 Y41.26495
G01 X93.49208 Y41.27453
G01 X93.52947 Y41.30501
G01 X93.60186 Y41.36668
G01 X93.70067 Y41.46640
G01 X93.71497 Y41.48365
G01 X93.76325 Y41.53683
G01 X93.78342 Y41.56002
G01 X93.86620 Y41.65525
G01 X93.91393 Y41.70498
G01 X93.92343 Y41.71395
G01 X94.03577 Y41.80376
G01 X94.07296 Y41.83152
G01 X94.09272 Y41.84255
G01 X94.23084 Y41.91684
G01 X94.24042 Y41.92190
G01 X94.29508 Y41.94212
G01 X94.42061 Y41.98268
G01 X94.44494 Y41.98837
G01 X94.51268 Y42.00076
G01 X94.60811 Y42.01341
G01 X94.66871 Y42.01639
G01 X94.73752 Y42.01639
G01 X94.79813 Y42.01341
G01 X94.89358 Y42.00076
G01 X94.96135 Y41.98837
G01 X94.98565 Y41.98268
G01 X95.11118 Y41.94212
G01 X95.16584 Y41.92190
G01 X95.17539 Y41.91687
G01 X95.31352 Y41.84257
G01 X95.33330 Y41.83152
G01 X95.37051 Y41.80374
G01 X95.48283 Y41.71395
G01 X95.49233 Y41.70498
G01 X95.54003 Y41.65525
G01 X95.61971 Y41.56361
G01 X95.64273 Y41.53666
G01 X95.69038 Y41.48362
G01 X95.69525 Y41.47824
G01 X95.73793 Y41.43163
G01 X95.80447 Y41.36678
G01 X95.87575 Y41.30460
G01 X95.92634 Y41.26505
G01 X95.97145 Y41.26256
G01 X96.01984 Y41.26495
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.92634 Y41.26505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.92634 Y41.26505
G01 X95.95667 Y41.16528
G01 X95.97313 Y41.08238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.97313 Y40.65136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.97313 Y40.65136
G01 X95.98961 Y40.56866
G01 X96.01987 Y40.46894
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.92642 Y40.46899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.92642 Y40.46899
G01 X95.95667 Y40.56866
G01 X95.97313 Y40.65136
G01 X95.97313 Y41.08238
G01 X95.98961 Y41.16528
G01 X96.01984 Y41.26495
G01 X96.03208 Y41.27453
G01 X96.06947 Y41.30501
G01 X96.14186 Y41.36668
G01 X96.24067 Y41.46640
G01 X96.25497 Y41.48365
G01 X96.30325 Y41.53683
G01 X96.32342 Y41.56002
G01 X96.40620 Y41.65525
G01 X96.45393 Y41.70498
G01 X96.46343 Y41.71395
G01 X96.57577 Y41.80376
G01 X96.61296 Y41.83152
G01 X96.63272 Y41.84255
G01 X96.77084 Y41.91684
G01 X96.78042 Y41.92190
G01 X96.83508 Y41.94212
G01 X96.96061 Y41.98268
G01 X96.98494 Y41.98837
G01 X97.05268 Y42.00076
G01 X97.14811 Y42.01341
G01 X97.20871 Y42.01639
G01 X97.27752 Y42.01639
G01 X97.33813 Y42.01341
G01 X97.43358 Y42.00076
G01 X97.50135 Y41.98837
G01 X97.52565 Y41.98268
G01 X97.65118 Y41.94212
G01 X97.70584 Y41.92190
G01 X97.71539 Y41.91687
G01 X97.85352 Y41.84257
G01 X97.87330 Y41.83152
G01 X97.91051 Y41.80374
G01 X98.02283 Y41.71395
G01 X98.03233 Y41.70498
G01 X98.08003 Y41.65525
G01 X98.15100 Y41.57361
G01 X98.17986 Y41.53429
G01 X98.21778 Y41.47689
G01 X98.25479 Y41.41446
G01 X98.29164 Y41.33854
G01 X98.31867 Y41.27516
G01 X98.33144 Y41.24059
G01 X98.36363 Y41.12492
G01 X98.37881 Y41.05761
G01 X98.37902 Y41.05652
G01 X98.39306 Y40.90143
G01 X98.39535 Y40.86698
G01 X98.39306 Y40.83252
G01 X98.37899 Y40.67742
G01 X98.37881 Y40.67633
G01 X98.36363 Y40.60905
G01 X98.33144 Y40.49335
G01 X98.31867 Y40.45878
G01 X98.29164 Y40.39541
G01 X98.25479 Y40.31949
G01 X98.21778 Y40.25705
G01 X98.17986 Y40.19965
G01 X98.15100 Y40.16033
G01 X98.08003 Y40.07870
G01 X98.03233 Y40.02896
G01 X98.02283 Y40.02000
G01 X97.91051 Y39.93021
G01 X97.87330 Y39.90244
G01 X97.85347 Y39.89135
G01 X97.71534 Y39.81708
G01 X97.70587 Y39.81207
G01 X97.65123 Y39.79188
G01 X97.52565 Y39.75129
G01 X97.50140 Y39.74560
G01 X97.43358 Y39.73320
G01 X97.33810 Y39.72053
G01 X97.27752 Y39.71756
G01 X97.20871 Y39.71756
G01 X97.14813 Y39.72053
G01 X97.05268 Y39.73320
G01 X96.98489 Y39.74560
G01 X96.96061 Y39.75129
G01 X96.83503 Y39.79188
G01 X96.78039 Y39.81207
G01 X96.77087 Y39.81710
G01 X96.63277 Y39.89137
G01 X96.61296 Y39.90244
G01 X96.57577 Y39.93018
G01 X96.46343 Y40.01997
G01 X96.45393 Y40.02896
G01 X96.40620 Y40.07870
G01 X96.32652 Y40.17036
G01 X96.30351 Y40.19731
G01 X96.25583 Y40.25037
G01 X96.25098 Y40.25573
G01 X96.20831 Y40.30234
G01 X96.14173 Y40.36721
G01 X96.07056 Y40.42929
G01 X96.01987 Y40.46894
G01 X95.97460 Y40.47140
G01 X95.92642 Y40.46899
G01 X95.91392 Y40.45924
G01 X95.87686 Y40.42901
G01 X95.80435 Y40.36724
G01 X95.70557 Y40.26757
G01 X95.69119 Y40.25022
G01 X95.69099 Y40.24999
G01 X95.64298 Y40.19711
G01 X95.54003 Y40.07870
G01 X95.49233 Y40.02896
G01 X95.48283 Y40.02000
G01 X95.37051 Y39.93021
G01 X95.33330 Y39.90244
G01 X95.31347 Y39.89135
G01 X95.17534 Y39.81708
G01 X95.16587 Y39.81207
G01 X95.11123 Y39.79188
G01 X94.98565 Y39.75129
G01 X94.96140 Y39.74560
G01 X94.89358 Y39.73320
G01 X94.79810 Y39.72053
G01 X94.73752 Y39.71756
G01 X94.66871 Y39.71756
G01 X94.60813 Y39.72053
G01 X94.51268 Y39.73320
G01 X94.44489 Y39.74560
G01 X94.42061 Y39.75129
G01 X94.29503 Y39.79188
G01 X94.24039 Y39.81207
G01 X94.23087 Y39.81710
G01 X94.09277 Y39.89137
G01 X94.07296 Y39.90244
G01 X94.03577 Y39.93018
G01 X93.92343 Y40.01997
G01 X93.91393 Y40.02896
G01 X93.86620 Y40.07870
G01 X93.78652 Y40.17036
G01 X93.76351 Y40.19731
G01 X93.71583 Y40.25037
G01 X93.71098 Y40.25573
G01 X93.66831 Y40.30234
G01 X93.60173 Y40.36721
G01 X93.53056 Y40.42929
G01 X93.47987 Y40.46894
G01 X93.43460 Y40.47140
G01 X93.38642 Y40.46899
G01 X93.37392 Y40.45924
G01 X93.33686 Y40.42901
G01 X93.26435 Y40.36724
G01 X93.16557 Y40.26757
G01 X93.15119 Y40.25022
G01 X93.15099 Y40.24999
G01 X93.10298 Y40.19711
G01 X93.00003 Y40.07870
G01 X92.95233 Y40.02896
G01 X92.94283 Y40.02000
G01 X92.83051 Y39.93021
G01 X92.79330 Y39.90244
G01 X92.77347 Y39.89135
G01 X92.63534 Y39.81708
G01 X92.62587 Y39.81207
G01 X92.57123 Y39.79188
G01 X92.44565 Y39.75129
G01 X92.42140 Y39.74560
G01 X92.35358 Y39.73320
G01 X92.25810 Y39.72053
G01 X92.19752 Y39.71756
G01 X92.12871 Y39.71756
G01 X92.06813 Y39.72053
G01 X91.97268 Y39.73320
G01 X91.90489 Y39.74560
G01 X91.88061 Y39.75129
G01 X91.78185 Y39.78322
G01 X91.75485 Y39.79135
G01 X91.75249 Y39.79201
G01 X91.73600 Y39.79683
G01 X91.68790 Y39.81154
G01 X91.59084 Y39.83435
G01 X91.52795 Y39.84494
G01 X91.43826 Y39.86013
G01 X91.35401 Y39.86716
G01 X91.34657 Y39.86780
G01 X91.32376 Y39.85617
G01 X91.24418 Y39.79178
G01 X91.20090 Y39.74852
G01 X91.13636 Y39.66884
G01 X91.08983 Y39.57748
G01 X91.06331 Y39.47842
G01 X91.06026 Y39.45922
G01 X91.06067 Y39.45833
G01 X91.08137 Y39.41362
G01 X91.09846 Y39.37379
G01 X91.13105 Y39.30539
G01 X91.15061 Y39.26841
G01 X91.20913 Y39.17420
G01 X91.24553 Y39.12406
G01 X91.31784 Y39.03930
G01 X93.12886 Y37.22828
G01 X93.15259 Y37.20339
G01 X93.17565 Y37.17794
G01 X93.19610 Y37.15035
G01 X93.19869 Y37.14688
G01 X93.23437 Y37.09308
G01 X93.25203 Y37.06361
G01 X93.26671 Y37.03258
G01 X93.28223 Y36.99729
G01 X93.29305 Y36.96897
G01 X93.30463 Y36.93661
G01 X93.31299 Y36.90331
G01 X93.32640 Y36.83585
G01 X93.33145 Y36.80169
G01 X93.33247 Y36.78696
G01 X93.33336 Y36.77555
G01 X93.33402 Y36.76765
G01 X93.33712 Y36.73313
G01 X93.35101 Y36.64279
G01 X93.35734 Y36.61375
G01 X93.37748 Y36.58762
G01 X93.42371 Y36.53331
G01 X93.45241 Y36.50276
G01 X93.47065 Y36.48261
G01 X93.54161 Y36.40095
G01 X93.57047 Y36.36163
G01 X93.60841 Y36.30420
G01 X93.64540 Y36.24180
G01 X93.68225 Y36.16585
G01 X93.70925 Y36.10258
G01 X93.72203 Y36.06796
G01 X93.75421 Y35.95231
G01 X93.76943 Y35.88495
G01 X93.76960 Y35.88386
G01 X93.78367 Y35.72877
G01 X93.78594 Y35.69433
G01 X93.78367 Y35.65986
G01 X93.76960 Y35.50479
G01 X93.76943 Y35.50370
G01 X93.75421 Y35.43634
G01 X93.72203 Y35.32069
G01 X93.70925 Y35.28607
G01 X93.68225 Y35.22280
G01 X93.64540 Y35.14685
G01 X93.60841 Y35.08445
G01 X93.57047 Y35.02702
G01 X93.54161 Y34.98770
G01 X93.47065 Y34.90604
G01 X93.42289 Y34.85630
G01 X93.41342 Y34.84736
G01 X93.30107 Y34.75755
G01 X93.26389 Y34.72979
G01 X93.24408 Y34.71871
G01 X93.10598 Y34.64444
G01 X93.09643 Y34.63941
G01 X93.04177 Y34.61919
G01 X92.91626 Y34.57863
G01 X92.89191 Y34.57294
G01 X92.82422 Y34.56057
G01 X92.72874 Y34.54790
G01 X92.66818 Y34.54492
G01 X92.59927 Y34.54492
G01 X92.53872 Y34.54790
G01 X92.44322 Y34.56057
G01 X92.37550 Y34.57294
G01 X92.35119 Y34.57863
G01 X92.22566 Y34.61919
G01 X92.17100 Y34.63941
G01 X92.16148 Y34.64444
G01 X92.12800 Y34.66245
G01 X92.02338 Y34.71871
G01 X92.00349 Y34.72981
G01 X91.98688 Y34.74177
G01 X91.96638 Y34.75752
G01 X91.85401 Y34.84734
G01 X91.84454 Y34.85630
G01 X91.79681 Y34.90604
G01 X91.71726 Y34.99755
G01 X91.69412 Y35.02465
G01 X91.64649 Y35.07769
G01 X91.64154 Y35.08315
G01 X91.59889 Y35.12971
G01 X91.53237 Y35.19450
G01 X91.46110 Y35.25668
G01 X91.41045 Y35.29628
G01 X91.36521 Y35.29875
G01 X91.31700 Y35.29633
G01 X91.30453 Y35.28660
G01 X91.26737 Y35.25630
G01 X91.19498 Y35.19461
G01 X91.09618 Y35.09491
G01 X91.08190 Y35.07769
G01 X91.03357 Y35.02445
G01 X91.01345 Y35.00129
G01 X90.93065 Y34.90604
G01 X90.88289 Y34.85630
G01 X90.87342 Y34.84736
G01 X90.76108 Y34.75755
G01 X90.72389 Y34.72979
G01 X90.70408 Y34.71871
G01 X90.56598 Y34.64444
G01 X90.55643 Y34.63941
G01 X90.50177 Y34.61919
G01 X90.37626 Y34.57863
G01 X90.35191 Y34.57294
G01 X90.28422 Y34.56057
G01 X90.21139 Y34.55089
G01 X90.12917 Y34.53504
G01 X90.12204 Y34.53324
G01 X90.07238 Y34.52239
G01 X90.05676 Y34.51955
G01 X89.89453 Y34.47259
G01 X89.89295 Y34.47195
G01 X89.82072 Y34.52425
G01 X89.76987 Y34.55828
G01 X89.71599 Y34.59151
G01 X89.68307 Y34.61066
G01 X89.62148 Y34.64442
G01 X89.61995 Y34.64523
G01 X89.61632 Y34.64721
G01 X89.48338 Y34.71871
G01 X89.46349 Y34.72981
G01 X89.44688 Y34.74177
G01 X89.42638 Y34.75752
G01 X89.31401 Y34.84734
G01 X89.30454 Y34.85630
G01 X89.25681 Y34.90604
G01 X89.17726 Y34.99755
G01 X89.15412 Y35.02465
G01 X89.10649 Y35.07769
G01 X89.10154 Y35.08315
G01 X89.05889 Y35.12971
G01 X88.99237 Y35.19450
G01 X88.92110 Y35.25668
G01 X88.87045 Y35.29628
G01 X88.82521 Y35.29875
G01 X88.77700 Y35.29633
G01 X88.76453 Y35.28660
G01 X88.72737 Y35.25630
G01 X88.65498 Y35.19461
G01 X88.55618 Y35.09491
G01 X88.54190 Y35.07769
G01 X88.49357 Y35.02445
G01 X88.47345 Y35.00129
G01 X88.39065 Y34.90604
G01 X88.34289 Y34.85630
G01 X88.33342 Y34.84736
G01 X88.22107 Y34.75755
G01 X88.18389 Y34.72979
G01 X88.16408 Y34.71871
G01 X88.02598 Y34.64444
G01 X88.01643 Y34.63941
G01 X87.96177 Y34.61919
G01 X87.83626 Y34.57863
G01 X87.81191 Y34.57294
G01 X87.74422 Y34.56057
G01 X87.64874 Y34.54790
G01 X87.58818 Y34.54492
G01 X87.51927 Y34.54492
G01 X87.45872 Y34.54790
G01 X87.36322 Y34.56057
G01 X87.29550 Y34.57294
G01 X87.27119 Y34.57863
G01 X87.14566 Y34.61919
G01 X87.09100 Y34.63941
G01 X87.08148 Y34.64444
G01 X87.04800 Y34.66245
G01 X86.94338 Y34.71871
G01 X86.92349 Y34.72981
G01 X86.90688 Y34.74177
G01 X86.88638 Y34.75752
G01 X86.77401 Y34.84734
G01 X86.76454 Y34.85630
G01 X86.71681 Y34.90604
G01 X86.63726 Y34.99755
G01 X86.61412 Y35.02465
G01 X86.56649 Y35.07769
G01 X86.56154 Y35.08315
G01 X86.51889 Y35.12971
G01 X86.45237 Y35.19450
G01 X86.38110 Y35.25668
G01 X86.33045 Y35.29628
G01 X86.28521 Y35.29875
G01 X86.23700 Y35.29633
G01 X86.22453 Y35.28660
G01 X86.18737 Y35.25630
G01 X86.11498 Y35.19461
G01 X86.01618 Y35.09491
G01 X86.00190 Y35.07769
G01 X85.95357 Y35.02445
G01 X85.93345 Y35.00129
G01 X85.85065 Y34.90604
G01 X85.80289 Y34.85630
G01 X85.79342 Y34.84736
G01 X85.68107 Y34.75755
G01 X85.64389 Y34.72979
G01 X85.62408 Y34.71871
G01 X85.48598 Y34.64444
G01 X85.47643 Y34.63941
G01 X85.42177 Y34.61919
G01 X85.29626 Y34.57863
G01 X85.27191 Y34.57294
G01 X85.20422 Y34.56057
G01 X85.10874 Y34.54790
G01 X85.04818 Y34.54492
G01 X84.97927 Y34.54492
G01 X84.91874 Y34.54790
G01 X84.82322 Y34.56057
G01 X84.75550 Y34.57294
G01 X84.71681 Y34.58201
G01 X84.66175 Y34.59263
G01 X84.63101 Y34.59732
G01 X84.60795 Y34.60050
G01 X84.60124 Y34.60464
G01 X84.59388 Y34.60921
G01 X84.54067 Y34.64289
G01 X84.49769 Y34.66799
G01 X84.40338 Y34.71871
G01 X84.38349 Y34.72981
G01 X84.36688 Y34.74177
G01 X84.34638 Y34.75752
G01 X84.23401 Y34.84734
G01 X84.22454 Y34.85630
G01 X84.17681 Y34.90604
G01 X84.09726 Y34.99755
G01 X84.07412 Y35.02465
G01 X84.02649 Y35.07769
G01 X84.02154 Y35.08315
G01 X83.97889 Y35.12971
G01 X83.91237 Y35.19450
G01 X83.84110 Y35.25668
G01 X83.79045 Y35.29628
G01 X83.74521 Y35.29875
G01 X83.69700 Y35.29633
G01 X83.68453 Y35.28660
G01 X83.64737 Y35.25630
G01 X83.57498 Y35.19461
G01 X83.47618 Y35.09491
G01 X83.46190 Y35.07769
G01 X83.41357 Y35.02445
G01 X83.39345 Y35.00129
G01 X83.31065 Y34.90604
G01 X83.26289 Y34.85630
G01 X83.25342 Y34.84736
G01 X83.14107 Y34.75755
G01 X83.10384 Y34.72976
G01 X83.08408 Y34.71871
G01 X83.04857 Y34.69961
G01 X83.01237 Y34.68015
G01 X82.99236 Y34.66895
G01 X82.98103 Y34.66237
G01 X82.94748 Y34.64162
G01 X82.88702 Y34.60190
G01 X82.86315 Y34.58556
G01 X82.81057 Y34.54812
G01 X82.75299 Y34.50342
G01 X82.73114 Y34.48496
G01 X82.66998 Y34.50213
G01 X82.53841 Y34.52781
G01 X82.50958 Y34.53093
G01 X82.47651 Y34.53527
G01 X82.43889 Y34.54109
G01 X82.38070 Y34.54764
G01 X82.28322 Y34.56057
G01 X82.21550 Y34.57294
G01 X82.19119 Y34.57863
G01 X82.06566 Y34.61919
G01 X82.01100 Y34.63941
G01 X82.00148 Y34.64444
G01 X81.96800 Y34.66245
G01 X81.86338 Y34.71871
G01 X81.84349 Y34.72981
G01 X81.82688 Y34.74177
G01 X81.80638 Y34.75752
G01 X81.69401 Y34.84734
G01 X81.68454 Y34.85630
G01 X81.63681 Y34.90604
G01 X81.55726 Y34.99755
G01 X81.53412 Y35.02465
G01 X81.48649 Y35.07769
G01 X81.48154 Y35.08315
G01 X81.43889 Y35.12971
G01 X81.37237 Y35.19450
G01 X81.30110 Y35.25668
G01 X81.25045 Y35.29628
G01 X81.20521 Y35.29875
G01 X81.15700 Y35.29633
G01 X81.14453 Y35.28660
G01 X81.10737 Y35.25630
G01 X81.03498 Y35.19461
G01 X80.93618 Y35.09491
G01 X80.92190 Y35.07769
G01 X80.87357 Y35.02445
G01 X80.85345 Y35.00129
G01 X80.77065 Y34.90604
G01 X80.72289 Y34.85630
G01 X80.71342 Y34.84736
G01 X80.60107 Y34.75755
G01 X80.56389 Y34.72979
G01 X80.54408 Y34.71871
G01 X80.40598 Y34.64444
G01 X80.39643 Y34.63941
G01 X80.34177 Y34.61919
G01 X80.21626 Y34.57863
G01 X80.19191 Y34.57294
G01 X80.12422 Y34.56057
G01 X80.02874 Y34.54790
G01 X79.96818 Y34.54492
G01 X79.89927 Y34.54492
G01 X79.83872 Y34.54790
G01 X79.74322 Y34.56057
G01 X79.67550 Y34.57294
G01 X79.65119 Y34.57863
G01 X79.52566 Y34.61919
G01 X79.47100 Y34.63941
G01 X79.46148 Y34.64444
G01 X79.42800 Y34.66245
G01 X79.32338 Y34.71871
G01 X79.30349 Y34.72981
G01 X79.28688 Y34.74177
G01 X79.26638 Y34.75752
G01 X79.15401 Y34.84734
G01 X79.14454 Y34.85630
G01 X79.09681 Y34.90604
G01 X79.01726 Y34.99755
G01 X78.99412 Y35.02465
G01 X78.94649 Y35.07769
G01 X78.94154 Y35.08315
G01 X78.89889 Y35.12971
G01 X78.83237 Y35.19450
G01 X78.76110 Y35.25668
G01 X78.71045 Y35.29628
G01 X78.66521 Y35.29875
G01 X78.61700 Y35.29633
G01 X78.60453 Y35.28660
G01 X78.56737 Y35.25630
G01 X78.49498 Y35.19461
G01 X78.39618 Y35.09491
G01 X78.38190 Y35.07769
G01 X78.33357 Y35.02445
G01 X78.31345 Y35.00129
G01 X78.23065 Y34.90604
G01 X78.18289 Y34.85630
G01 X78.17342 Y34.84736
G01 X78.06108 Y34.75755
G01 X78.02384 Y34.72976
G01 X78.00408 Y34.71871
G01 X77.96857 Y34.69961
G01 X77.93237 Y34.68015
G01 X77.91236 Y34.66895
G01 X77.90103 Y34.66237
G01 X77.86748 Y34.64162
G01 X77.80702 Y34.60190
G01 X77.78315 Y34.58556
G01 X77.73057 Y34.54812
G01 X77.67299 Y34.50342
G01 X77.59625 Y34.43860
G01 X77.57713 Y34.42001
G01 X77.57403 Y34.41698
G01 X77.57365 Y34.41579
G01 X77.56293 Y34.31391
G01 X77.56293 Y34.25272
G01 X77.57365 Y34.15087
G01 X77.60530 Y34.05343
G01 X77.65650 Y33.96474
G01 X77.69247 Y33.91523
G01 X77.76105 Y33.83908
G01 X77.84393 Y33.77886
G01 X77.93755 Y33.73718
G01 X77.99575 Y33.71828
G01 X78.07047 Y33.70035
G01 X78.14710 Y33.69433
G01 X78.40918 Y33.69433
G01 X78.46034 Y33.68978
G01 X78.56308 Y33.66037
G01 X78.65503 Y33.61236
G01 X78.73539 Y33.54681
G01 X78.80098 Y33.46639
G01 X78.84898 Y33.37449
G01 X78.87837 Y33.27175
G01 X78.88292 Y33.22057
G01 X78.88292 Y33.12433
G01 X78.86293 Y33.12433
G01 X78.86293 Y33.18432
G01 X78.85353 Y33.27990
G01 X78.82564 Y33.37183
G01 X78.78035 Y33.45653
G01 X78.71942 Y33.53080
G01 X78.64517 Y33.59174
G01 X78.56046 Y33.63700
G01 X78.46854 Y33.66489
G01 X78.37294 Y33.67431
G01 X77.27294 Y33.67431
G01 X77.17733 Y33.66489
G01 X77.08541 Y33.63700
G01 X77.00070 Y33.59174
G01 X76.92646 Y33.53080
G01 X76.86552 Y33.45653
G01 X76.82023 Y33.37183
G01 X76.79234 Y33.27990
G01 X76.78295 Y33.18432
G01 X76.78295 Y31.60432
G01 X76.82790 Y31.55936
G01 X76.86763 Y31.51768
G01 X76.91650 Y31.46378
G01 X76.96971 Y31.39919
G01 X76.98074 Y31.38430
G01 X77.01025 Y31.34719
G01 X77.04627 Y31.30515
G01 X77.08556 Y31.26426
G01 X77.11754 Y31.23470
G01 X77.15937 Y31.20066
G01 X77.19483 Y31.17531
G01 X77.24294 Y31.14508
G01 X77.27294 Y31.12855
G01 X77.29161 Y31.11778
G01 X77.34553 Y31.08547
G01 X77.40814 Y31.04348
G01 X77.42193 Y31.03325
G01 X77.43329 Y30.99477
G01 X77.44540 Y30.94773
G01 X77.44759 Y30.92743
G01 X77.45201 Y30.88029
G01 X77.45234 Y30.87374
G01 X77.45318 Y30.83932
G01 X77.45318 Y29.58931
G01 X77.45315 Y29.58263
G01 X77.45287 Y29.55487
G01 X77.45287 Y29.55408
G01 X77.45274 Y29.53775
G01 X77.45338 Y29.50064
G01 X77.45661 Y29.42680
G01 X77.45930 Y29.38710
G01 X77.46097 Y29.36914
G01 X77.46410 Y29.32065
G01 X77.46565 Y29.27895
G01 X77.46997 Y29.21550
G01 X77.47317 Y29.18250
G01 X77.52745 Y29.12904
G01 X77.61373 Y29.07389
G01 X77.66847 Y29.04651
G01 X77.73976 Y29.01761
G01 X77.81469 Y29.00021
G01 X77.98825 Y28.97407
G01 X78.17586 Y28.91621
G01 X78.35277 Y28.83102
G01 X78.51500 Y28.72043
G01 X78.65891 Y28.58685
G01 X78.78132 Y28.43335
G01 X78.87949 Y28.26335
G01 X78.96425 Y28.04740
G01 X79.01832 Y27.94631
G01 X79.04464 Y27.90854
G01 X79.10230 Y27.84006
G01 X79.17146 Y27.78324
G01 X79.24979 Y27.73993
G01 X79.30583 Y27.71535
G01 X79.40344 Y27.68421
G01 X79.50540 Y27.67407
G01 X79.60725 Y27.68532
G01 X79.66704 Y27.69838
G01 X79.69386 Y27.70727
G01 X79.69597 Y27.71009
G01 X79.69600 Y27.71011
G01 X79.78144 Y27.82332
G01 X79.82589 Y27.89462
G01 X79.84449 Y27.92604
G01 X79.87512 Y27.98068
G01 X79.90278 Y28.03521
G01 X79.92409 Y28.08210
G01 X79.93161 Y28.09807
G01 X79.96846 Y28.17397
G01 X80.00547 Y28.23640
G01 X80.04339 Y28.29381
G01 X80.07225 Y28.33313
G01 X80.14321 Y28.41476
G01 X80.19092 Y28.46449
G01 X80.20042 Y28.47344
G01 X80.31273 Y28.56322
G01 X80.34995 Y28.59101
G01 X80.36978 Y28.60211
G01 X80.50791 Y28.67638
G01 X80.51741 Y28.68139
G01 X80.57207 Y28.70160
G01 X80.69759 Y28.74217
G01 X80.72190 Y28.74788
G01 X80.78962 Y28.76028
G01 X80.88515 Y28.77290
G01 X80.94568 Y28.77590
G01 X80.97926 Y28.77676
G01 X81.01469 Y28.77679
G01 X81.08512 Y28.78034
G01 X81.14380 Y28.78616
G01 X81.17354 Y28.78972
G01 X81.25441 Y28.80092
G01 X81.41634 Y28.83815
G01 X81.42853 Y28.83447
G01 X81.51728 Y28.79774
G01 X81.65558 Y28.72380
G01 X81.73544 Y28.67041
G01 X81.85667 Y28.57092
G01 X81.92459 Y28.50303
G01 X82.02408 Y28.38177
G01 X82.07745 Y28.30193
G01 X82.15139 Y28.16361
G01 X82.18814 Y28.07486
G01 X82.23366 Y27.92477
G01 X82.25012 Y27.84194
G01 X82.25012 Y27.41093
G01 X82.23366 Y27.32815
G01 X82.18814 Y27.17811
G01 X82.15139 Y27.08936
G01 X82.07745 Y26.95104
G01 X82.04682 Y26.90521
G01 X82.00958 Y26.88301
G01 X81.87776 Y26.78835
G01 X81.84941 Y26.76386
G01 X81.81354 Y26.73455
G01 X81.80171 Y26.72541
G01 X81.75228 Y26.68411
G01 X81.69884 Y26.49820
G01 X81.68916 Y26.43702
G01 X81.68037 Y26.32614
G01 X81.68037 Y25.74512
G01 X81.67953 Y25.71070
G01 X81.67783 Y25.67639
G01 X81.67280 Y25.64243
G01 X81.65939 Y25.57497
G01 X81.65103 Y25.54162
G01 X81.63948 Y25.50931
G01 X81.61314 Y25.44570
G01 X81.59843 Y25.41464
G01 X81.58080 Y25.38520
G01 X81.54253 Y25.32792
G01 X81.52208 Y25.30037
G01 X81.49899 Y25.27492
G01 X81.47527 Y25.25000
G01 X81.40211 Y25.17682
G01 X79.61876 Y23.39346
G01 X79.54560 Y23.32033
G01 X79.52071 Y23.29661
G01 X79.49524 Y23.27352
G01 X79.46768 Y23.25308
G01 X79.41040 Y23.21480
G01 X79.38482 Y23.19946
G01 X79.38099 Y23.19717
G01 X79.34990 Y23.18246
G01 X79.28629 Y23.15612
G01 X79.25399 Y23.14457
G01 X79.22064 Y23.13621
G01 X79.15320 Y23.12280
G01 X79.11921 Y23.11777
G01 X79.08492 Y23.11607
G01 X79.05048 Y23.11523
G01 X71.11819 Y23.11523
G01 X71.08359 Y23.11437
G01 X71.06398 Y23.11340
G01 X70.92169 Y23.09196
G01 X70.91613 Y23.08734
G01 X70.86843 Y23.04731
G01 X70.84252 Y23.02450
G01 X70.79152 Y22.97741
G01 X70.78573 Y22.97200
G01 X70.78204 Y22.96852
G01 X70.69784 Y22.90123
G01 X70.67023 Y22.87799
G01 X70.62235 Y22.83550
G01 X70.61735 Y22.83110
G01 X70.57986 Y22.79847
G01 X70.49995 Y22.71813
G01 X70.43864 Y22.64744
G01 X70.39581 Y22.59491
G01 X70.39172 Y22.58955
G01 X70.30064 Y22.56194
G01 X70.21781 Y22.54546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.39228 Y22.50103 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.39228 Y22.50103
G01 X70.38994 Y22.53408
G01 X70.39172 Y22.58955
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.78677 Y22.54548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.78677 Y22.54548
G01 X69.70402 Y22.52900
G01 X69.61283 Y22.50134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.61230 Y22.58988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.61230 Y22.58988
G01 X69.70402 Y22.56194
G01 X69.78677 Y22.54548
G01 X70.21781 Y22.54546
G01 X70.30064 Y22.52900
G01 X70.39215 Y22.50124
G01 X70.39228 Y22.50103
G01 X70.39231 Y22.50103
G01 X70.43838 Y22.44294
G01 X70.50008 Y22.37297
G01 X70.56620 Y22.30593
G01 X70.61301 Y22.26377
G01 X70.61743 Y22.25983
G01 X70.67023 Y22.21297
G01 X70.69792 Y22.18968
G01 X70.75273 Y22.14584
G01 X70.78199 Y22.12247
G01 X70.79152 Y22.11348
G01 X70.79401 Y22.11112
G01 X70.81920 Y22.08709
G01 X70.83323 Y22.07332
G01 X70.84115 Y22.06535
G01 X70.92837 Y21.99031
G01 X70.95380 Y21.98584
G01 X71.01499 Y21.97617
G01 X71.12588 Y21.96738
G01 X84.00158 Y21.96738
G01 X84.02911 Y21.96791
G01 X84.04465 Y21.96852
G01 X84.17963 Y21.98681
G01 X84.18443 Y21.99029
G01 X84.23454 Y22.02669
G01 X84.31925 Y22.09895
G01 X85.93949 Y23.71919
G01 X85.95862 Y23.73908
G01 X85.96916 Y23.75051
G01 X86.05164 Y23.85884
G01 X86.05260 Y23.86478
G01 X86.06228 Y23.92597
G01 X86.07107 Y24.03684
G01 X86.07107 Y26.52231
G01 X86.07079 Y26.54255
G01 X86.07046 Y26.55401
G01 X86.05402 Y26.68682
G01 X86.04770 Y26.71588
G01 X86.02756 Y26.74202
G01 X85.98133 Y26.79630
G01 X85.95341 Y26.82599
G01 X85.94823 Y26.83160
G01 X85.94739 Y26.83249
G01 X85.93441 Y26.84700
G01 X85.86342 Y26.92866
G01 X85.83459 Y26.96798
G01 X85.79667 Y27.02536
G01 X85.75966 Y27.08779
G01 X85.72281 Y27.16374
G01 X85.72095 Y27.16755
G01 X85.69289 Y27.22622
G01 X85.68491 Y27.24237
G01 X85.66368 Y27.28408
G01 X85.61498 Y27.36648
G01 X85.56670 Y27.43783
G01 X85.53574 Y27.48106
G01 X85.49248 Y27.53826
G01 X85.48834 Y27.54341
G01 X85.48796 Y27.54390
G01 X85.48369 Y27.58725
G01 X85.48369 Y27.68329
G01 X85.48750 Y27.72215
G01 X85.48753 Y27.72218
G01 X85.57112 Y27.83226
G01 X85.61623 Y27.90376
G01 X85.63734 Y27.93917
G01 X85.66794 Y27.99383
G01 X85.69365 Y28.04412
G01 X85.71707 Y28.09477
G01 X85.72278 Y28.10684
G01 X85.75966 Y28.18273
G01 X85.79667 Y28.24519
G01 X85.83459 Y28.30260
G01 X85.86345 Y28.34194
G01 X85.93441 Y28.42355
G01 X85.98212 Y28.47331
G01 X85.99164 Y28.48227
G01 X86.10393 Y28.57204
G01 X86.14115 Y28.59980
G01 X86.16093 Y28.61087
G01 X86.29906 Y28.68517
G01 X86.30861 Y28.69020
G01 X86.36327 Y28.71042
G01 X86.48879 Y28.75098
G01 X86.51310 Y28.75667
G01 X86.58087 Y28.76907
G01 X86.64244 Y28.77724
G01 X86.71750 Y28.79129
G01 X86.73584 Y28.79579
G01 X86.75887 Y28.80097
G01 X86.80835 Y28.81133
G01 X86.97101 Y28.86287
G01 X86.97594 Y28.86493
G01 X87.04262 Y28.89045
G01 X87.05092 Y28.89332
G01 X87.10139 Y28.97397
G01 X87.10764 Y28.99109
G01 X87.10767 Y28.99111
G01 X87.09532 Y29.03991
G01 X87.06860 Y29.13411
G01 X87.05588 Y29.17514
G01 X87.05102 Y29.18946
G01 X87.03655 Y29.23706
G01 X87.02931 Y29.26386
G01 X87.01303 Y29.31631
G01 X87.00213 Y29.34717
G01 X86.99080 Y29.38217
G01 X86.97556 Y29.43389
G01 X86.96347 Y29.48093
G01 X86.96126 Y29.50122
G01 X86.95844 Y29.53137
G01 X86.95684 Y29.54841
G01 X86.95651 Y29.55492
G01 X86.95567 Y29.58931
G01 X86.95567 Y30.58481
G01 X86.95349 Y30.64000
G01 X86.95105 Y30.67099
G01 X86.91770 Y30.83932
G01 X86.91605 Y30.84458
G01 X86.90602 Y30.87871
G01 X86.89827 Y30.90726
G01 X86.89042 Y30.93442
G01 X86.88448 Y30.95390
G01 X86.86091 Y30.96360
G01 X86.67866 Y31.01557
G01 X86.61747 Y31.02527
G01 X86.50645 Y31.03406
G01 X86.31094 Y31.03406
G01 X86.27653 Y31.03492
G01 X86.26992 Y31.03525
G01 X86.22283 Y31.03965
G01 X86.20251 Y31.04186
G01 X86.15534 Y31.05400
G01 X86.14816 Y31.05611
G01 X86.10363 Y31.06926
G01 X86.07841 Y31.07721
G01 X86.04041 Y31.09583
G01 X85.99273 Y31.12103
G01 X85.96596 Y31.13591
G01 X85.93553 Y31.15946
G01 X85.89380 Y31.19360
G01 X85.86769 Y31.21605
G01 X85.84518 Y31.24224
G01 X85.81105 Y31.28395
G01 X85.78750 Y31.31440
G01 X85.77269 Y31.34099
G01 X85.74750 Y31.38867
G01 X85.73701 Y31.40935
G01 X85.72880 Y31.42682
G01 X85.72080 Y31.45217
G01 X85.70556 Y31.50388
G01 X85.69347 Y31.55090
G01 X85.69126 Y31.57122
G01 X85.68684 Y31.61839
G01 X85.68651 Y31.62492
G01 X85.68567 Y31.65931
G01 X85.68567 Y32.90932
G01 X85.68651 Y32.94373
G01 X85.68684 Y32.95031
G01 X85.69126 Y32.99743
G01 X85.69344 Y33.01770
G01 X85.70556 Y33.06477
G01 X85.72080 Y33.11648
G01 X85.72880 Y33.14185
G01 X85.74750 Y33.17998
G01 X85.77269 Y33.22766
G01 X85.78753 Y33.25427
G01 X85.81100 Y33.28463
G01 X85.84511 Y33.32636
G01 X85.86766 Y33.35260
G01 X85.89390 Y33.37515
G01 X85.93563 Y33.40927
G01 X85.96599 Y33.43273
G01 X85.99273 Y33.44762
G01 X86.04041 Y33.47282
G01 X86.07841 Y33.49143
G01 X86.10363 Y33.49938
G01 X86.15534 Y33.51465
G01 X86.20254 Y33.52682
G01 X86.22283 Y33.52900
G01 X86.22725 Y33.52941
G01 X86.26987 Y33.53340
G01 X86.27653 Y33.53373
G01 X86.31094 Y33.53456
G01 X86.86091 Y33.53456
G01 X86.89532 Y33.53373
G01 X86.90195 Y33.53340
G01 X86.94887 Y33.52903
G01 X86.96931 Y33.52679
G01 X87.01651 Y33.51465
G01 X87.06822 Y33.49938
G01 X87.09347 Y33.49143
G01 X87.13144 Y33.47282
G01 X87.17912 Y33.44762
G01 X87.20586 Y33.43273
G01 X87.23256 Y33.41224
G01 X87.23622 Y33.40927
G01 X87.27795 Y33.37515
G01 X87.31574 Y33.34190
G01 X87.32966 Y33.32877
G01 X87.37076 Y33.29276
G01 X87.38653 Y33.27998
G01 X87.42636 Y33.24533
G01 X87.42849 Y33.24335
G01 X87.47211 Y33.20551
G01 X87.54632 Y33.14538
G01 X87.59705 Y33.10667
G01 X87.59916 Y33.10507
G01 X87.59964 Y33.10474
G01 X87.61828 Y33.01099
G01 X87.62357 Y32.95735
G01 X87.62593 Y32.90932
G01 X87.62593 Y31.65931
G01 X87.62357 Y31.61128
G01 X87.62285 Y31.60432
G01 X87.58094 Y31.56632
G01 X87.57599 Y31.56182
G01 X87.54010 Y31.52893
G01 X87.49961 Y31.49377
G01 X87.49016 Y31.48600
G01 X87.45125 Y31.45209
G01 X87.42926 Y31.43172
G01 X87.39679 Y31.40340
G01 X87.38458 Y31.39337
G01 X87.35298 Y31.36568
G01 X87.33782 Y31.35151
G01 X87.30909 Y31.32636
G01 X87.29591 Y31.31554
G01 X87.26761 Y31.29070
G01 X87.25504 Y31.27889
G01 X87.22773 Y31.25491
G01 X87.21412 Y31.24374
G01 X87.18681 Y31.21976
G01 X87.17424 Y31.20795
G01 X87.14594 Y31.18311
G01 X87.13276 Y31.17229
G01 X87.10403 Y31.14714
G01 X87.08887 Y31.13297
G01 X87.05727 Y31.10528
G01 X87.04505 Y31.09525
G01 X87.01259 Y31.06693
G01 X86.99060 Y31.04656
G01 X86.95168 Y31.01265
G01 X86.94224 Y31.00488
G01 X86.90175 Y30.96972
G01 X86.88448 Y30.95390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.62285 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.62285 Y31.60432
G01 X88.08595 Y31.60432
G01 X88.13090 Y31.55936
G01 X88.17063 Y31.51768
G01 X88.21950 Y31.46378
G01 X88.27271 Y31.39919
G01 X88.28374 Y31.38430
G01 X88.31325 Y31.34719
G01 X88.34927 Y31.30515
G01 X88.38856 Y31.26426
G01 X88.42054 Y31.23470
G01 X88.46237 Y31.20066
G01 X88.49783 Y31.17531
G01 X88.54594 Y31.14508
G01 X88.57591 Y31.12855
G01 X88.59461 Y31.11778
G01 X88.64853 Y31.08547
G01 X88.71114 Y31.04348
G01 X88.72493 Y31.03325
G01 X88.73629 Y30.99477
G01 X88.74840 Y30.94770
G01 X88.75059 Y30.92743
G01 X88.75501 Y30.88031
G01 X88.75534 Y30.87374
G01 X88.75618 Y30.83932
G01 X88.75618 Y29.58931
G01 X88.75534 Y29.55492
G01 X88.75501 Y29.54834
G01 X88.75059 Y29.50122
G01 X88.74840 Y29.48095
G01 X88.73629 Y29.43389
G01 X88.72105 Y29.38217
G01 X88.71305 Y29.35680
G01 X88.69435 Y29.31867
G01 X88.66916 Y29.27100
G01 X88.66116 Y29.25629
G01 X88.63543 Y29.21029
G01 X88.61955 Y29.18032
G01 X88.61005 Y29.16137
G01 X88.59743 Y29.13719
G01 X88.57317 Y29.09276
G01 X88.55034 Y29.04781
G01 X88.54668 Y29.04006
G01 X88.50073 Y28.95444
G01 X88.47129 Y28.90531
G01 X88.47132 Y28.60971
G01 X88.43479 Y28.57973
G01 X88.36687 Y28.51179
G01 X88.26738 Y28.39058
G01 X88.21401 Y28.31070
G01 X88.14010 Y28.17239
G01 X88.10332 Y28.08365
G01 X88.05780 Y27.93361
G01 X88.04134 Y27.85075
G01 X88.04134 Y27.41974
G01 X88.02486 Y27.33696
G01 X87.97934 Y27.18687
G01 X87.94259 Y27.09813
G01 X87.86865 Y26.95982
G01 X87.83804 Y26.91400
G01 X87.83720 Y26.91349
G01 X87.80083 Y26.89185
G01 X87.66898 Y26.79716
G01 X87.64051 Y26.77258
G01 X87.60474 Y26.74334
G01 X87.59281 Y26.73412
G01 X87.54348 Y26.69290
G01 X87.49004 Y26.50702
G01 X87.48036 Y26.44580
G01 X87.47157 Y26.33491
G01 X87.47157 Y23.56072
G01 X87.47073 Y23.52628
G01 X87.46903 Y23.49199
G01 X87.46400 Y23.45800
G01 X87.45059 Y23.39057
G01 X87.44223 Y23.35722
G01 X87.43068 Y23.32491
G01 X87.40434 Y23.26130
G01 X87.38963 Y23.23024
G01 X87.37200 Y23.20080
G01 X87.33373 Y23.14352
G01 X87.31328 Y23.11597
G01 X87.29019 Y23.09049
G01 X87.26647 Y23.06560
G01 X87.19331 Y22.99242
G01 X86.18232 Y21.98142
G01 X85.20800 Y21.00708
G01 X85.15288 Y20.94505
G01 X85.12408 Y20.90853
G01 X85.01780 Y20.72707
G01 X85.01481 Y20.72003
G01 X84.99939 Y20.68564
G01 X84.98672 Y20.65885
G01 X84.96769 Y20.61610
G01 X84.95088 Y20.57584
G01 X84.90317 Y20.54396
G01 X84.84267 Y20.51160
G01 X84.75392 Y20.47485
G01 X84.68827 Y20.45494
G01 X84.59406 Y20.43619
G01 X84.52576 Y20.42948
G01 X84.47775 Y20.42712
G01 X70.96993 Y20.42712
G01 X70.94679 Y20.39893
G01 X70.87887 Y20.33101
G01 X70.75764 Y20.23152
G01 X70.67778 Y20.17815
G01 X70.53947 Y20.10421
G01 X70.45073 Y20.06746
G01 X70.30064 Y20.02194
G01 X70.21781 Y20.00546
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.78677 Y20.00548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.78677 Y20.00548
G01 X69.70402 Y19.98900
G01 X69.61283 Y19.96134
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.61230 Y20.04988 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.61230 Y20.04988
G01 X69.70402 Y20.02194
G01 X69.78677 Y20.00548
G01 X70.21781 Y20.00546
G01 X70.30064 Y19.98900
G01 X70.45073 Y19.94346
G01 X70.53947 Y19.90670
G01 X70.67778 Y19.83279
G01 X70.75764 Y19.77942
G01 X70.87887 Y19.67993
G01 X70.94679 Y19.61201
G01 X70.97679 Y19.57546
G01 X72.25093 Y19.57546
G01 X72.80937 Y20.13390
G01 X72.84501 Y20.16619
G01 X72.89804 Y20.20970
G01 X72.97790 Y20.26306
G01 X73.03843 Y20.29542
G01 X73.12718 Y20.33218
G01 X73.19281 Y20.35209
G01 X73.28702 Y20.37084
G01 X73.35532 Y20.37754
G01 X73.40335 Y20.37990
G01 X85.03017 Y20.37990
G01 X85.03973 Y20.37419
G01 X85.10091 Y20.34302
G01 X85.35359 Y20.25864
G01 X85.41478 Y20.24897
G01 X85.52565 Y20.24018
G01 X88.92920 Y20.24018
G01 X88.95671 Y20.24071
G01 X88.97225 Y20.24132
G01 X89.10723 Y20.25961
G01 X89.11203 Y20.26309
G01 X89.16214 Y20.29949
G01 X89.24685 Y20.37175
G01 X91.70529 Y22.83019
G01 X91.72442 Y22.85008
G01 X91.73496 Y22.86151
G01 X91.81744 Y22.96984
G01 X91.81840 Y22.97578
G01 X91.82808 Y23.03697
G01 X91.83687 Y23.14784
G01 X91.83687 Y26.51791
G01 X91.83659 Y26.53818
G01 X91.83626 Y26.54959
G01 X91.81982 Y26.68246
G01 X91.81350 Y26.71146
G01 X91.79336 Y26.73760
G01 X91.74713 Y26.79190
G01 X91.71850 Y26.82238
G01 X91.70021 Y26.84260
G01 X91.62925 Y26.92424
G01 X91.60039 Y26.96356
G01 X91.57301 Y27.00374
G01 X91.56247 Y27.02096
G01 X91.52546 Y27.08342
G01 X91.49836 Y27.13922
G01 X91.48828 Y27.15914
G01 X91.46013 Y27.21271
G01 X91.45587 Y27.22096
G01 X91.43885 Y27.25436
G01 X91.37382 Y27.35992
G01 X91.32107 Y27.43231
G01 X91.31015 Y27.44705
G01 X91.26687 Y27.50425
G01 X91.25637 Y27.51705
G01 X91.25630 Y27.51705
G01 X91.17179 Y27.54037
G01 X91.06953 Y27.54649
G01 X90.96824 Y27.53125
G01 X90.90903 Y27.51583
G01 X90.81312 Y27.47984
G01 X90.72678 Y27.42467
G01 X90.65381 Y27.35279
G01 X90.61495 Y27.30552
G01 X90.57093 Y27.24253
G01 X90.53733 Y27.17336
G01 X90.49491 Y27.06531
G01 X90.39674 Y26.89526
G01 X90.27431 Y26.74177
G01 X90.15132 Y26.62764
G01 X90.15132 Y26.66079
G01 X90.18787 Y26.69081
G01 X90.25579 Y26.75873
G01 X90.35528 Y26.87994
G01 X90.40865 Y26.95982
G01 X90.48259 Y27.09813
G01 X90.51934 Y27.18687
G01 X90.56486 Y27.33696
G01 X90.58361 Y27.43120
G01 X90.59897 Y27.58725
G01 X90.59897 Y27.68329
G01 X90.58361 Y27.83938
G01 X90.56486 Y27.93361
G01 X90.51934 Y28.08365
G01 X90.48259 Y28.17239
G01 X90.40865 Y28.31070
G01 X90.35528 Y28.39058
G01 X90.25579 Y28.51179
G01 X90.18787 Y28.57973
G01 X90.15132 Y28.60973
G01 X90.15132 Y28.64296
G01 X90.27431 Y28.52883
G01 X90.39671 Y28.37534
G01 X90.49488 Y28.20529
G01 X90.53910 Y28.09259
G01 X90.59341 Y27.99117
G01 X90.61975 Y27.95342
G01 X90.67738 Y27.88507
G01 X90.74647 Y27.82838
G01 X90.82470 Y27.78515
G01 X90.88073 Y27.76053
G01 X90.93786 Y27.74235
G01 X90.97837 Y27.72939
G01 X91.08033 Y27.71923
G01 X91.18221 Y27.73056
G01 X91.24197 Y27.74359
G01 X91.25622 Y27.74834
G01 X91.32097 Y27.82944
G01 X91.37245 Y27.90219
G01 X91.41728 Y27.97303
G01 X91.44792 Y28.02772
G01 X91.45521 Y28.04100
G01 X91.48815 Y28.10270
G01 X91.50032 Y28.12660
G01 X91.52546 Y28.17831
G01 X91.56247 Y28.24080
G01 X91.60039 Y28.29823
G01 X91.62925 Y28.33752
G01 X91.70021 Y28.41916
G01 X91.74792 Y28.46889
G01 X91.75744 Y28.47786
G01 X91.86973 Y28.56764
G01 X91.90695 Y28.59541
G01 X91.92678 Y28.60651
G01 X92.06491 Y28.68078
G01 X92.07438 Y28.68578
G01 X92.12902 Y28.70597
G01 X92.25459 Y28.74659
G01 X92.27885 Y28.75225
G01 X92.34667 Y28.76465
G01 X92.46117 Y28.77984
G01 X92.50219 Y28.78568
G01 X92.53554 Y28.79144
G01 X92.57319 Y28.79696
G01 X92.58601 Y28.79848
G01 X92.73407 Y28.83074
G01 X92.82813 Y28.86025
G01 X92.83051 Y28.86101
G01 X92.87070 Y28.87369
G01 X92.98553 Y28.83889
G01 X93.07428 Y28.80211
G01 X93.21258 Y28.72817
G01 X93.29244 Y28.67481
G01 X93.41367 Y28.57534
G01 X93.48159 Y28.50740
G01 X93.58108 Y28.38619
G01 X93.63445 Y28.30630
G01 X93.70839 Y28.16800
G01 X93.74514 Y28.07925
G01 X93.79066 Y27.92916
G01 X93.80714 Y27.84633
G01 X93.80714 Y27.41532
G01 X93.82360 Y27.33257
G01 X93.86912 Y27.18248
G01 X93.90590 Y27.09373
G01 X93.97981 Y26.95543
G01 X94.03318 Y26.87555
G01 X94.13267 Y26.75431
G01 X94.20059 Y26.68639
G01 X94.23712 Y26.65642
G01 X94.23712 Y26.62325
G01 X94.08726 Y26.76229
G01 X94.00217 Y26.82561
G01 X93.96541 Y26.84718
G01 X93.88710 Y26.88428
G01 X93.80351 Y26.90702
G01 X93.71723 Y26.91471
G01 X93.65604 Y26.91471
G01 X93.60308 Y26.90913
G01 X93.60303 Y26.90913
G01 X93.56663 Y26.88746
G01 X93.43478 Y26.79277
G01 X93.40651 Y26.76836
G01 X93.37054 Y26.73897
G01 X93.35883 Y26.72993
G01 X93.30928 Y26.68850
G01 X93.25584 Y26.50257
G01 X93.24613 Y26.44138
G01 X93.23737 Y26.33051
G01 X93.23737 Y22.67172
G01 X93.23653 Y22.63728
G01 X93.23483 Y22.60299
G01 X93.22980 Y22.56900
G01 X93.21639 Y22.50157
G01 X93.20803 Y22.46822
G01 X93.19648 Y22.43591
G01 X93.17014 Y22.37230
G01 X93.15543 Y22.34124
G01 X93.13780 Y22.31180
G01 X93.09953 Y22.25453
G01 X93.07908 Y22.22697
G01 X93.05599 Y22.20149
G01 X93.03227 Y22.17660
G01 X92.95911 Y22.10342
G01 X89.97870 Y19.12301
G01 X89.97342 Y19.11770
G01 X89.93951 Y19.08382
G01 X89.90200 Y19.04325
G01 X89.88762 Y19.02641
G01 X89.87916 Y19.01669
G01 X89.85882 Y18.99372
G01 X89.83375 Y18.96388
G01 X89.78490 Y18.90251
G01 X89.74005 Y18.84092
G01 X89.72224 Y18.81422
G01 X89.67934 Y18.75443
G01 X89.67289 Y18.74577
G01 X89.67218 Y18.74483
G01 X89.61587 Y18.72773
G01 X89.61388 Y18.72735
G01 X89.60916 Y18.72735
G01 X89.51983 Y18.72796
G01 X89.45089 Y18.72796
G01 X89.40535 Y18.72908
G01 X89.35625 Y18.73149
G01 X89.26641 Y18.73149
G01 X89.10957 Y18.72380
G01 X89.01731 Y18.71468
G01 X88.91795 Y18.69995
G01 X88.91770 Y18.69992
G01 X87.75392 Y18.69992
G01 X87.57134 Y18.73259
G01 X85.97135 Y18.73259
G01 X85.84059 Y18.69992
G01 X83.88461 Y18.69992
G01 X83.81542 Y18.71018
G01 X83.72238 Y18.71938
G01 X83.56556 Y18.72710
G01 X83.47470 Y18.72710
G01 X83.31786 Y18.71938
G01 X83.22479 Y18.71018
G01 X83.15555 Y18.69992
G01 X81.93940 Y18.69992
G01 X81.78012 Y18.72822
G01 X80.18015 Y18.72822
G01 X80.06696 Y18.69992
G01 X79.88383 Y18.65413
G01 X79.83366 Y18.61295
G01 X79.77270 Y18.53868
G01 X79.72744 Y18.45397
G01 X79.69955 Y18.36205
G01 X79.69013 Y18.26647
G01 X79.69013 Y16.66647
G01 X79.69955 Y16.57087
G01 X79.72744 Y16.47895
G01 X79.77270 Y16.39424
G01 X79.83366 Y16.31999
G01 X79.90791 Y16.25903
G01 X79.99262 Y16.21377
G01 X80.00936 Y16.20869
G01 X79.20220 Y15.40150
G01 X78.33095 Y15.40150
G01 X78.28292 Y15.39914
G01 X78.21462 Y15.39244
G01 X78.12041 Y15.37369
G01 X78.05475 Y15.35378
G01 X77.96603 Y15.31702
G01 X77.90550 Y15.28466
G01 X77.82564 Y15.23130
G01 X77.77261 Y15.18779
G01 X77.73697 Y15.15548
G01 X76.31338 Y13.73191
G01 X76.24797 Y13.73836
G01 X76.15191 Y13.73836
G01 X75.99583 Y13.72297
G01 X75.90162 Y13.70425
G01 X75.75155 Y13.65871
G01 X75.66281 Y13.62195
G01 X75.52450 Y13.54804
G01 X75.44462 Y13.49467
G01 X75.32339 Y13.39518
G01 X75.25547 Y13.32726
G01 X75.15598 Y13.20603
G01 X75.10261 Y13.12615
G01 X75.02870 Y12.98784
G01 X74.99194 Y12.89910
G01 X74.94640 Y12.74903
G01 X74.92768 Y12.65482
G01 X74.91229 Y12.49874
G01 X74.91229 Y12.40268
G01 X74.92768 Y12.24662
G01 X74.94640 Y12.15241
G01 X74.99194 Y12.00232
G01 X75.02870 Y11.91358
G01 X75.10261 Y11.77527
G01 X75.15598 Y11.69541
G01 X75.25547 Y11.57418
G01 X75.32339 Y11.50626
G01 X75.44462 Y11.40677
G01 X75.52450 Y11.35340
G01 X75.66281 Y11.27946
G01 X75.75155 Y11.24271
G01 X75.90162 Y11.19719
G01 X75.98440 Y11.18073
G01 X76.41541 Y11.18071
G01 X76.49824 Y11.16425
G01 X76.64833 Y11.11871
G01 X76.73707 Y11.08195
G01 X76.87538 Y11.00804
G01 X76.95524 Y10.95467
G01 X77.07647 Y10.85518
G01 X77.14439 Y10.78726
G01 X77.24388 Y10.66603
G01 X77.29725 Y10.58615
G01 X77.37119 Y10.44784
G01 X77.40794 Y10.35910
G01 X77.45346 Y10.20903
G01 X77.47220 Y10.11482
G01 X77.48757 Y9.95874
G01 X77.48757 Y9.86268
G01 X77.47220 Y9.70662
G01 X77.45346 Y9.61241
G01 X77.40794 Y9.46232
G01 X77.37119 Y9.37358
G01 X77.29725 Y9.23527
G01 X77.24388 Y9.15541
G01 X77.14439 Y9.03418
G01 X77.07647 Y8.96626
G01 X76.95524 Y8.86677
G01 X76.87538 Y8.81340
G01 X76.73707 Y8.73946
G01 X76.64833 Y8.70271
G01 X76.49824 Y8.65719
G01 X76.40403 Y8.63845
G01 X76.24797 Y8.62308
G01 X76.15191 Y8.62308
G01 X75.99583 Y8.63845
G01 X75.95496 Y8.64658
G01 X75.90162 Y8.65719
G01 X75.75155 Y8.70271
G01 X75.66281 Y8.73946
G01 X75.52450 Y8.81340
G01 X75.44462 Y8.86677
G01 X75.32339 Y8.96626
G01 X75.25547 Y9.03418
G01 X75.15598 Y9.15541
G01 X75.10261 Y9.23527
G01 X75.02870 Y9.37358
G01 X74.99194 Y9.46232
G01 X74.94640 Y9.61241
G01 X74.92768 Y9.70662
G01 X74.91229 Y9.86268
G01 X74.91229 Y9.95874
G01 X74.92768 Y10.11482
G01 X74.94640 Y10.20903
G01 X74.99194 Y10.35910
G01 X75.02870 Y10.44784
G01 X75.10261 Y10.58615
G01 X75.15598 Y10.66603
G01 X75.25547 Y10.78726
G01 X75.32339 Y10.85518
G01 X75.44462 Y10.95467
G01 X75.52450 Y11.00804
G01 X75.66281 Y11.08195
G01 X75.75155 Y11.11871
G01 X75.90162 Y11.16425
G01 X75.98440 Y11.18073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.41541 Y11.18071 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.41541 Y11.18071
G01 X76.49824 Y11.19719
G01 X76.64833 Y11.24271
G01 X76.73707 Y11.27946
G01 X76.87538 Y11.35340
G01 X76.95524 Y11.40677
G01 X77.07647 Y11.50626
G01 X77.14439 Y11.57418
G01 X77.24388 Y11.69541
G01 X77.29725 Y11.77527
G01 X77.37119 Y11.91358
G01 X77.40794 Y12.00232
G01 X77.45346 Y12.15241
G01 X77.47220 Y12.24662
G01 X77.48757 Y12.40268
G01 X77.48757 Y12.49874
G01 X77.48475 Y12.52742
G01 X78.67888 Y13.72152
G01 X79.55015 Y13.72152
G01 X79.59816 Y13.72388
G01 X79.60829 Y13.72487
G01 X79.66442 Y13.75142
G01 X79.74670 Y13.79531
G01 X79.80735 Y13.83168
G01 X79.87662 Y13.87791
G01 X79.93232 Y13.91921
G01 X79.99244 Y13.96854
G01 X80.04334 Y14.01469
G01 X80.07082 Y14.04083
G01 X81.11222 Y15.08223
G01 X81.13968 Y15.10839
G01 X81.19058 Y15.15451
G01 X81.25073 Y15.20387
G01 X81.30643 Y15.24517
G01 X81.37570 Y15.29139
G01 X81.43635 Y15.32774
G01 X81.51862 Y15.37166
G01 X81.57390 Y15.39779
G01 X81.57463 Y15.39815
G01 X81.58492 Y15.39914
G01 X81.63295 Y15.40150
G01 X84.94260 Y15.40150
G01 X85.77066 Y16.22959
G01 X85.69911 Y16.26785
G01 X85.62486 Y16.32878
G01 X85.56390 Y16.40303
G01 X85.51864 Y16.48776
G01 X85.49075 Y16.57966
G01 X85.48133 Y16.67526
G01 X85.48133 Y18.27526
G01 X85.49075 Y18.37086
G01 X85.51864 Y18.46279
G01 X85.56390 Y18.54750
G01 X85.62486 Y18.62174
G01 X85.66733 Y18.65659
G01 X85.97135 Y18.73259
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.06133 Y17.16525 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.06133 Y17.16525
G01 X88.10332 Y17.02687
G01 X88.14010 Y16.93813
G01 X88.18844 Y16.84770
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.06133 Y16.81080 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.06133 Y16.81080
G01 X88.06995 Y16.82401
G01 X88.07853 Y16.82761
G01 X88.17909 Y16.84692
G01 X88.18844 Y16.84770
G01 X88.24292 Y16.81811
G01 X88.24556 Y16.81666
G01 X88.32938 Y16.77084
G01 X88.44101 Y16.69764
G01 X88.46474 Y16.67905
G01 X88.47528 Y16.67094
G01 X88.52128 Y16.63622
G01 X88.53672 Y16.62423
G01 X88.64393 Y16.53851
G01 X88.67718 Y16.51352
G01 X88.68120 Y16.51072
G01 X88.70093 Y16.49967
G01 X88.83906 Y16.42538
G01 X88.84858 Y16.42035
G01 X88.90327 Y16.40016
G01 X89.02880 Y16.35959
G01 X89.05310 Y16.35390
G01 X89.12087 Y16.34151
G01 X89.21635 Y16.32883
G01 X89.27693 Y16.32586
G01 X89.34574 Y16.32586
G01 X89.40632 Y16.32883
G01 X89.50177 Y16.34151
G01 X89.56951 Y16.35388
G01 X89.59384 Y16.35959
G01 X89.71937 Y16.40013
G01 X89.77406 Y16.42035
G01 X89.78361 Y16.42540
G01 X89.92173 Y16.49970
G01 X89.94149 Y16.51072
G01 X89.97868 Y16.53848
G01 X90.09102 Y16.62830
G01 X90.10052 Y16.63726
G01 X90.14825 Y16.68700
G01 X90.21922 Y16.76863
G01 X90.24807 Y16.80795
G01 X90.28602 Y16.86541
G01 X90.32298 Y16.92779
G01 X90.35986 Y17.00376
G01 X90.38686 Y17.06703
G01 X90.39963 Y17.10165
G01 X90.43181 Y17.21727
G01 X90.44703 Y17.28463
G01 X90.44721 Y17.28573
G01 X90.46128 Y17.44082
G01 X90.46354 Y17.47529
G01 X90.46128 Y17.50973
G01 X90.44721 Y17.66482
G01 X90.44703 Y17.66591
G01 X90.43181 Y17.73327
G01 X90.39963 Y17.84889
G01 X90.38686 Y17.88352
G01 X90.35986 Y17.94679
G01 X90.32298 Y18.02276
G01 X90.28602 Y18.08514
G01 X90.24807 Y18.14260
G01 X90.21922 Y18.18191
G01 X90.14825 Y18.26355
G01 X90.10052 Y18.31328
G01 X90.09102 Y18.32225
G01 X90.07794 Y18.33271
G01 X89.98048 Y18.41062
G01 X89.92435 Y18.45575
G01 X89.89285 Y18.48260
G01 X89.84601 Y18.52479
G01 X89.80476 Y18.56472
G01 X89.74314 Y18.62875
G01 X89.67472 Y18.70904
G01 X89.61442 Y18.72735
G01 X89.61388 Y18.72735
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.67289 Y18.74577 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.67289 Y18.74577
G01 X89.67561 Y18.70802
G01 X89.74314 Y18.62875
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.91795 Y18.69995 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.91795 Y18.69995
G01 X88.86296 Y18.68326
G01 X88.77421 Y18.64651
G01 X88.63591 Y18.57259
G01 X88.55602 Y18.51920
G01 X88.43479 Y18.41973
G01 X88.36687 Y18.35179
G01 X88.26738 Y18.23058
G01 X88.21401 Y18.15070
G01 X88.14010 Y18.01239
G01 X88.10332 Y17.92365
G01 X88.06131 Y17.78514
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.57134 Y18.73259 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.57134 Y18.73259
G01 X87.84025 Y18.68445
G01 X87.84355 Y18.68268
G01 X87.91782 Y18.62174
G01 X87.97876 Y18.54750
G01 X88.02405 Y18.46279
G01 X88.05191 Y18.37086
G01 X88.06133 Y18.27526
G01 X88.06131 Y17.78514
G01 X88.05953 Y17.77305
G01 X88.05016 Y17.67828
G01 X88.04246 Y17.52144
G01 X88.04246 Y17.42911
G01 X88.05016 Y17.27226
G01 X88.05953 Y17.17750
G01 X88.06133 Y17.16525
G01 X88.06133 Y16.81077
G01 X87.97315 Y16.67526
G01 X87.96367 Y16.65586
G01 X87.93268 Y16.59817
G01 X87.87454 Y16.49990
G01 X87.84805 Y16.45850
G01 X87.78813 Y16.39856
G01 X87.68635 Y16.34021
G01 X87.61963 Y16.30905
G01 X87.58158 Y16.29246
G01 X87.57134 Y16.28832
G01 X87.52750 Y16.26909
G01 X87.49004 Y16.12439
G01 X87.48036 Y16.06320
G01 X87.47736 Y16.04232
G01 X87.47289 Y16.00767
G01 X87.46977 Y15.97852
G01 X87.46400 Y15.93960
G01 X87.45059 Y15.87217
G01 X87.44223 Y15.83882
G01 X87.43068 Y15.80651
G01 X87.40434 Y15.74290
G01 X87.38963 Y15.71184
G01 X87.37200 Y15.68240
G01 X87.33373 Y15.62513
G01 X87.31328 Y15.59757
G01 X87.29019 Y15.57209
G01 X87.26647 Y15.54720
G01 X87.19331 Y15.47402
G01 X85.78567 Y14.06638
G01 X85.76078 Y14.04265
G01 X85.73533 Y14.01959
G01 X85.70775 Y13.99914
G01 X85.70231 Y13.99516
G01 X85.65047 Y13.96087
G01 X85.63165 Y13.94956
G01 X85.62832 Y13.94753
G01 X85.59233 Y13.92406
G01 X85.53238 Y13.88235
G01 X85.52565 Y13.87760
G01 X85.47305 Y13.84017
G01 X85.40112 Y13.78904
G01 X85.33706 Y13.73963
G01 X85.31775 Y13.72358
G01 X85.31773 Y13.72355
G01 X85.31681 Y13.72279
G01 X85.29055 Y13.72152
G01 X81.98088 Y13.72152
G01 X80.78449 Y12.52513
G01 X80.78957 Y12.47334
G01 X80.78957 Y12.37728
G01 X80.77420 Y12.22122
G01 X80.75546 Y12.12701
G01 X80.70994 Y11.97692
G01 X80.67319 Y11.88818
G01 X80.59925 Y11.74987
G01 X80.54588 Y11.67001
G01 X80.44639 Y11.54878
G01 X80.37847 Y11.48086
G01 X80.25724 Y11.38137
G01 X80.17738 Y11.32800
G01 X80.03907 Y11.25406
G01 X79.95033 Y11.21731
G01 X79.80024 Y11.17179
G01 X79.71741 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.28640 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.28640 Y11.15533
G01 X79.20362 Y11.13885
G01 X79.05355 Y11.09331
G01 X78.96481 Y11.05655
G01 X78.82650 Y10.98264
G01 X78.74662 Y10.92927
G01 X78.62539 Y10.82978
G01 X78.55747 Y10.76186
G01 X78.45798 Y10.64063
G01 X78.40461 Y10.56075
G01 X78.33070 Y10.42244
G01 X78.29394 Y10.33370
G01 X78.24840 Y10.18363
G01 X78.22968 Y10.08942
G01 X78.21429 Y9.93334
G01 X78.21429 Y9.83728
G01 X78.22968 Y9.68122
G01 X78.24840 Y9.58701
G01 X78.29394 Y9.43692
G01 X78.33070 Y9.34818
G01 X78.40461 Y9.20987
G01 X78.45798 Y9.13001
G01 X78.55747 Y9.00878
G01 X78.62539 Y8.94086
G01 X78.74662 Y8.84137
G01 X78.82650 Y8.78800
G01 X78.96481 Y8.71406
G01 X79.05355 Y8.67731
G01 X79.20362 Y8.63179
G01 X79.27164 Y8.61826
G01 X79.29783 Y8.61305
G01 X79.45391 Y8.59768
G01 X79.54997 Y8.59768
G01 X79.70603 Y8.61305
G01 X79.80024 Y8.63179
G01 X79.95033 Y8.67731
G01 X80.03907 Y8.71406
G01 X80.17738 Y8.78800
G01 X80.25724 Y8.84137
G01 X80.37847 Y8.94086
G01 X80.44639 Y9.00878
G01 X80.54588 Y9.13001
G01 X80.59925 Y9.20987
G01 X80.67319 Y9.34818
G01 X80.70994 Y9.43692
G01 X80.75546 Y9.58701
G01 X80.77420 Y9.68122
G01 X80.78957 Y9.83728
G01 X80.78957 Y9.93334
G01 X80.77420 Y10.08942
G01 X80.75546 Y10.18363
G01 X80.70994 Y10.33370
G01 X80.67319 Y10.42244
G01 X80.59925 Y10.56075
G01 X80.54588 Y10.64063
G01 X80.44639 Y10.76186
G01 X80.37847 Y10.82978
G01 X80.25724 Y10.92927
G01 X80.17738 Y10.98264
G01 X80.03907 Y11.05655
G01 X79.95033 Y11.09331
G01 X79.80024 Y11.13885
G01 X79.71741 Y11.15533
G01 X79.28640 Y11.15533
G01 X79.20362 Y11.17179
G01 X79.05355 Y11.21731
G01 X78.96481 Y11.25406
G01 X78.82650 Y11.32800
G01 X78.74662 Y11.38137
G01 X78.62539 Y11.48086
G01 X78.55747 Y11.54878
G01 X78.45798 Y11.67001
G01 X78.40461 Y11.74987
G01 X78.33070 Y11.88818
G01 X78.29394 Y11.97692
G01 X78.24840 Y12.12701
G01 X78.22968 Y12.22122
G01 X78.21429 Y12.37728
G01 X78.21429 Y12.47334
G01 X78.22968 Y12.62942
G01 X78.24840 Y12.72363
G01 X78.29394 Y12.87370
G01 X78.33070 Y12.96244
G01 X78.40461 Y13.10075
G01 X78.45798 Y13.18063
G01 X78.55747 Y13.30186
G01 X78.62539 Y13.36978
G01 X78.74662 Y13.46927
G01 X78.82650 Y13.52264
G01 X78.96481 Y13.59655
G01 X79.05355 Y13.63331
G01 X79.20362 Y13.67885
G01 X79.29783 Y13.69757
G01 X79.45391 Y13.71296
G01 X79.54997 Y13.71296
G01 X79.59226 Y13.70880
G01 X79.60829 Y13.72487
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.57463 Y15.39815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.57463 Y15.39815
G01 X81.60641 Y15.43320
G01 X81.64992 Y15.48624
G01 X81.70328 Y15.56610
G01 X81.73564 Y15.62662
G01 X81.77240 Y15.71535
G01 X81.79231 Y15.78100
G01 X81.81105 Y15.87521
G01 X81.81776 Y15.94351
G01 X81.82012 Y15.99152
G01 X81.82012 Y16.18039
G01 X81.87572 Y16.18588
G01 X81.96765 Y16.21377
G01 X82.05235 Y16.25903
G01 X82.12662 Y16.31999
G01 X82.18756 Y16.39424
G01 X82.19310 Y16.40460
G01 X82.23285 Y16.47895
G01 X82.26071 Y16.57087
G01 X82.27013 Y16.66647
G01 X82.27013 Y17.15647
G01 X82.26833 Y17.16871
G01 X82.25896 Y17.26348
G01 X82.25126 Y17.42032
G01 X82.25126 Y17.51265
G01 X82.25896 Y17.66947
G01 X82.26833 Y17.76421
G01 X82.27011 Y17.77635
G01 X82.27013 Y18.26647
G01 X82.26071 Y18.36205
G01 X82.23285 Y18.45397
G01 X82.18756 Y18.53868
G01 X82.12662 Y18.61295
G01 X82.05235 Y18.67389
G01 X82.03567 Y18.68280
G01 X81.78012 Y18.72822
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.24172 Y18.69995 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.24172 Y18.69995
G01 X78.37139 Y18.63063
G01 X78.45124 Y18.57727
G01 X78.57248 Y18.47777
G01 X78.64040 Y18.40985
G01 X78.73989 Y18.28862
G01 X78.75879 Y18.26032
G01 X78.79326 Y18.20876
G01 X78.86719 Y18.07043
G01 X78.90395 Y17.98171
G01 X78.94947 Y17.83162
G01 X78.96821 Y17.73741
G01 X78.98358 Y17.58133
G01 X78.98358 Y17.48529
G01 X78.96821 Y17.32921
G01 X78.94947 Y17.23500
G01 X78.90395 Y17.08491
G01 X78.86719 Y16.99619
G01 X78.79326 Y16.85786
G01 X78.73989 Y16.77801
G01 X78.64040 Y16.65677
G01 X78.57248 Y16.58885
G01 X78.45124 Y16.48936
G01 X78.37139 Y16.43599
G01 X78.23306 Y16.36206
G01 X78.14434 Y16.32530
G01 X77.99425 Y16.27978
G01 X77.90004 Y16.26104
G01 X77.74396 Y16.24567
G01 X77.64792 Y16.24567
G01 X77.49184 Y16.26104
G01 X77.39763 Y16.27978
G01 X77.24754 Y16.32530
G01 X77.15882 Y16.36206
G01 X77.02049 Y16.43599
G01 X76.94063 Y16.48936
G01 X76.81940 Y16.58885
G01 X76.75148 Y16.65677
G01 X76.65198 Y16.77801
G01 X76.59862 Y16.85786
G01 X76.52468 Y16.99619
G01 X76.48793 Y17.08491
G01 X76.44594 Y17.22337
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.44594 Y17.84323 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.44594 Y17.84323
G01 X76.48793 Y17.98171
G01 X76.52468 Y18.07043
G01 X76.59862 Y18.20876
G01 X76.65198 Y18.28862
G01 X76.75148 Y18.40985
G01 X76.81940 Y18.47777
G01 X76.94063 Y18.57727
G01 X77.02049 Y18.63063
G01 X77.15005 Y18.69992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.06696 Y18.69992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.06696 Y18.69992
G01 X78.24172 Y18.69995
G01 X78.23186 Y18.70241
G01 X78.13814 Y18.72108
G01 X77.98132 Y18.74435
G01 X77.89488 Y18.75288
G01 X77.73809 Y18.76060
G01 X77.65381 Y18.76060
G01 X77.49697 Y18.75288
G01 X77.41053 Y18.74435
G01 X77.25371 Y18.72108
G01 X77.15998 Y18.70241
G01 X77.15005 Y18.69992
G01 X76.28059 Y18.69992
G01 X76.27952 Y18.70051
G01 X76.27647 Y18.70106
G01 X75.95595 Y18.76164
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.92367 Y18.47788 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.92367 Y18.47788
G01 X73.91092 Y18.53200
G01 X73.91089 Y18.53200
G01 X73.86825 Y18.56655
G01 X73.77698 Y18.61303
G01 X73.68791 Y18.63690
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.35593 Y18.76164 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.35593 Y18.76164
G01 X73.99570 Y18.66304
G01 X73.94851 Y18.60554
G01 X73.91038 Y18.53421
G01 X73.91089 Y18.53200
G01 X73.92367 Y18.47788
G01 X73.94216 Y18.40985
G01 X73.96593 Y18.33332
G01 X73.99530 Y18.19657
G01 X74.00076 Y18.15037
G01 X74.00569 Y18.06739
G01 X74.00569 Y16.73330
G01 X74.00685 Y16.69261
G01 X74.00889 Y16.67516
G01 X74.03535 Y16.58905
G01 X74.07922 Y16.51651
G01 X74.13911 Y16.45659
G01 X74.24089 Y16.39825
G01 X74.34960 Y16.34745
G01 X74.35593 Y16.34453
G01 X74.39794 Y16.32533
G01 X74.40269 Y16.31250
G01 X74.44823 Y16.11971
G01 X74.45217 Y16.08050
G01 X74.45567 Y16.01037
G01 X74.45567 Y15.06307
G01 X74.44688 Y14.95218
G01 X74.43721 Y14.89099
G01 X74.43624 Y14.88502
G01 X74.35377 Y14.77671
G01 X74.34323 Y14.76528
G01 X74.32410 Y14.74540
G01 X73.10444 Y13.52576
G01 X73.01984 Y13.45358
G01 X72.96972 Y13.41715
G01 X72.95014 Y13.40339
G01 X72.83086 Y13.39450
G01 X72.82989 Y13.39452
G01 X72.81432 Y13.39447
G01 X72.78677 Y13.39409
G01 X72.76192 Y13.39333
G01 X72.70132 Y13.39036
G01 X72.60587 Y13.37771
G01 X72.53810 Y13.36531
G01 X72.51379 Y13.35962
G01 X72.38826 Y13.31906
G01 X72.33360 Y13.29884
G01 X72.32405 Y13.29379
G01 X72.18593 Y13.21949
G01 X72.16617 Y13.20844
G01 X72.12898 Y13.18071
G01 X72.01661 Y13.09089
G01 X72.00714 Y13.08195
G01 X71.95944 Y13.03222
G01 X71.93594 Y13.00522
G01 X71.88842 Y12.95056
G01 X71.88684 Y12.94837
G01 X71.85961 Y12.91129
G01 X71.82164 Y12.85383
G01 X71.78466 Y12.79140
G01 X71.74778 Y12.71545
G01 X71.72078 Y12.65211
G01 X71.71369 Y12.63290
G01 X71.70798 Y12.61749
G01 X71.67582 Y12.50186
G01 X71.66063 Y12.43455
G01 X71.66045 Y12.43349
G01 X71.64638 Y12.27837
G01 X71.64412 Y12.24393
G01 X71.64638 Y12.20946
G01 X71.66045 Y12.05437
G01 X71.66063 Y12.05330
G01 X71.67582 Y11.98599
G01 X71.70800 Y11.87029
G01 X71.72078 Y11.83572
G01 X71.74780 Y11.77235
G01 X71.78466 Y11.69646
G01 X71.82167 Y11.63400
G01 X71.85959 Y11.57662
G01 X71.88844 Y11.53730
G01 X71.95941 Y11.45564
G01 X72.00714 Y11.40591
G01 X72.01666 Y11.39691
G01 X72.03650 Y11.38104
G01 X72.10076 Y11.32971
G01 X72.12840 Y11.30641
G01 X72.18128 Y11.25950
G01 X72.18542 Y11.25582
G01 X72.23223 Y11.21365
G01 X72.29863 Y11.14642
G01 X72.36025 Y11.07649
G01 X72.40632 Y11.01835
G01 X72.40650 Y11.01815
G01 X72.49802 Y10.99039
G01 X72.58075 Y10.97393
G01 X72.74999 Y10.97393
G01 X72.84262 Y10.97390
G01 X73.01176 Y10.97393
G01 X73.09464 Y10.99039
G01 X73.24473 Y11.03590
G01 X73.33347 Y11.07266
G01 X73.47178 Y11.14660
G01 X73.55164 Y11.19996
G01 X73.67287 Y11.29945
G01 X73.74079 Y11.36737
G01 X73.84028 Y11.48861
G01 X73.89365 Y11.56847
G01 X73.96759 Y11.70679
G01 X74.00434 Y11.79552
G01 X74.04986 Y11.94560
G01 X74.06860 Y12.03981
G01 X74.08397 Y12.19590
G01 X74.08397 Y12.29193
G01 X74.08084 Y12.32389
G01 X75.74990 Y13.99295
G01 X75.78219 Y14.02856
G01 X75.82572 Y14.08162
G01 X75.87909 Y14.16148
G01 X75.91145 Y14.22198
G01 X75.94820 Y14.31073
G01 X75.96811 Y14.37638
G01 X75.98686 Y14.47059
G01 X75.99357 Y14.53889
G01 X75.99593 Y14.58690
G01 X75.99593 Y16.24725
G01 X76.05153 Y16.25273
G01 X76.14345 Y16.28062
G01 X76.22816 Y16.32589
G01 X76.30243 Y16.38682
G01 X76.36336 Y16.46109
G01 X76.36888 Y16.47143
G01 X76.40863 Y16.54580
G01 X76.43652 Y16.63772
G01 X76.44594 Y16.73330
G01 X76.44594 Y17.22337
G01 X76.44414 Y17.23559
G01 X76.43479 Y17.33025
G01 X76.42707 Y17.48707
G01 X76.42707 Y17.57955
G01 X76.43479 Y17.73640
G01 X76.44414 Y17.83106
G01 X76.44594 Y17.84323
G01 X76.44594 Y18.33332
G01 X76.43652 Y18.42890
G01 X76.40863 Y18.52083
G01 X76.36336 Y18.60554
G01 X76.30243 Y18.67981
G01 X76.27647 Y18.70106
G01 X76.27647 Y18.70109
G01 X75.95595 Y18.76164
G01 X74.35593 Y18.76164
G01 X74.13040 Y18.69992
G01 X73.75128 Y18.69992
G01 X73.68841 Y18.63706
G01 X73.68791 Y18.63690
G01 X73.67714 Y18.63391
G01 X73.61181 Y18.61267
G01 X73.37358 Y18.49375
G01 X73.32347 Y18.45735
G01 X73.23876 Y18.38506
G01 X73.09400 Y18.24031
G01 X73.06911 Y18.21661
G01 X73.04364 Y18.19352
G01 X73.01608 Y18.17308
G01 X72.95880 Y18.13480
G01 X72.92934 Y18.11714
G01 X72.89830 Y18.10246
G01 X72.83469 Y18.07612
G01 X72.80239 Y18.06457
G01 X72.76904 Y18.05621
G01 X72.70160 Y18.04280
G01 X72.66761 Y18.03777
G01 X72.63332 Y18.03607
G01 X72.59888 Y18.03523
G01 X71.11819 Y18.03523
G01 X71.08359 Y18.03437
G01 X71.06398 Y18.03340
G01 X70.92169 Y18.01196
G01 X70.91613 Y18.00734
G01 X70.86843 Y17.96731
G01 X70.84252 Y17.94450
G01 X70.79152 Y17.89741
G01 X70.78573 Y17.89200
G01 X70.78202 Y17.88849
G01 X70.66967 Y17.79870
G01 X70.63246 Y17.77092
G01 X70.61268 Y17.75987
G01 X70.47458 Y17.68560
G01 X70.46505 Y17.68057
G01 X70.41044 Y17.66038
G01 X70.28484 Y17.61979
G01 X70.26056 Y17.61410
G01 X70.19276 Y17.60170
G01 X70.09729 Y17.58903
G01 X70.03673 Y17.58606
G01 X69.96792 Y17.58606
G01 X69.90732 Y17.58903
G01 X69.81187 Y17.60170
G01 X69.74405 Y17.61410
G01 X69.71977 Y17.61979
G01 X69.59421 Y17.66038
G01 X69.53958 Y17.68057
G01 X69.53008 Y17.68560
G01 X69.39198 Y17.75987
G01 X69.37214 Y17.77094
G01 X69.33498 Y17.79868
G01 X69.22261 Y17.88849
G01 X69.21314 Y17.89746
G01 X69.16539 Y17.94719
G01 X69.09442 Y18.02885
G01 X69.06559 Y18.06815
G01 X69.02764 Y18.12555
G01 X68.99066 Y18.18798
G01 X68.95378 Y18.26391
G01 X68.92678 Y18.32728
G01 X68.91400 Y18.36185
G01 X68.88179 Y18.47754
G01 X68.86663 Y18.54483
G01 X68.86643 Y18.54592
G01 X68.85238 Y18.70101
G01 X68.85012 Y18.73548
G01 X68.85238 Y18.76992
G01 X68.86643 Y18.92504
G01 X68.86663 Y18.92611
G01 X68.88179 Y18.99342
G01 X68.91398 Y19.10899
G01 X68.91667 Y19.11630
G01 X68.92678 Y19.14366
G01 X68.95378 Y19.20701
G01 X68.99066 Y19.28295
G01 X69.02764 Y19.34539
G01 X69.06561 Y19.40284
G01 X69.09442 Y19.44211
G01 X69.16544 Y19.52377
G01 X69.21149 Y19.57193
G01 X69.21314 Y19.57350
G01 X69.22264 Y19.58247
G01 X69.30676 Y19.64970
G01 X69.33437 Y19.67297
G01 X69.38230 Y19.71549
G01 X69.38723 Y19.71983
G01 X69.42480 Y19.75255
G01 X69.50463 Y19.83284
G01 X69.56604 Y19.90363
G01 X69.60834 Y19.95544
G01 X69.61283 Y19.96134
G01 X69.61471 Y20.01666
G01 X69.61230 Y20.04988
G01 X69.56620 Y20.10810
G01 X69.50463 Y20.17795
G01 X69.43823 Y20.24521
G01 X69.39134 Y20.28740
G01 X69.38725 Y20.29105
G01 X69.33437 Y20.33797
G01 X69.30676 Y20.36121
G01 X69.28657 Y20.37736
G01 X69.22264 Y20.42849
G01 X69.21314 Y20.43746
G01 X69.16539 Y20.48719
G01 X69.09442 Y20.56885
G01 X69.06559 Y20.60815
G01 X69.02764 Y20.66555
G01 X68.99066 Y20.72799
G01 X68.95378 Y20.80391
G01 X68.92678 Y20.86728
G01 X68.91400 Y20.90185
G01 X68.88179 Y21.01755
G01 X68.87905 Y21.02783
G01 X68.86663 Y21.08483
G01 X68.86643 Y21.08595
G01 X68.85238 Y21.24101
G01 X68.85012 Y21.27548
G01 X68.85238 Y21.30992
G01 X68.86643 Y21.46502
G01 X68.86663 Y21.46611
G01 X68.88179 Y21.53342
G01 X68.91403 Y21.64917
G01 X68.92678 Y21.68366
G01 X68.95378 Y21.74701
G01 X68.99063 Y21.82293
G01 X69.02764 Y21.88539
G01 X69.03534 Y21.89809
G01 X69.06561 Y21.94284
G01 X69.09444 Y21.98211
G01 X69.16544 Y22.06377
G01 X69.18403 Y22.08432
G01 X69.21314 Y22.11350
G01 X69.22261 Y22.12244
G01 X69.30676 Y22.18970
G01 X69.33437 Y22.21297
G01 X69.38230 Y22.25549
G01 X69.38723 Y22.25983
G01 X69.42480 Y22.29255
G01 X69.50463 Y22.37284
G01 X69.56604 Y22.44363
G01 X69.60834 Y22.49544
G01 X69.61283 Y22.50134
G01 X69.61471 Y22.55666
G01 X69.61230 Y22.58988
G01 X69.56620 Y22.64810
G01 X69.50463 Y22.71795
G01 X69.43823 Y22.78521
G01 X69.39134 Y22.82740
G01 X69.38725 Y22.83105
G01 X69.33437 Y22.87797
G01 X69.30676 Y22.90121
G01 X69.22264 Y22.96849
G01 X69.21314 Y22.97746
G01 X69.16539 Y23.02719
G01 X69.09442 Y23.10885
G01 X69.06559 Y23.14815
G01 X69.02764 Y23.20555
G01 X68.99066 Y23.26798
G01 X68.95378 Y23.34391
G01 X68.92678 Y23.40728
G01 X68.91400 Y23.44182
G01 X68.88439 Y23.54830
G01 X68.88179 Y23.55754
G01 X68.86663 Y23.62483
G01 X68.86643 Y23.62597
G01 X68.85238 Y23.78101
G01 X68.85012 Y23.81548
G01 X68.85238 Y23.84992
G01 X68.86643 Y24.00504
G01 X68.86663 Y24.00611
G01 X68.88179 Y24.07342
G01 X68.91400 Y24.18909
G01 X68.92678 Y24.22366
G01 X68.95378 Y24.28701
G01 X68.96655 Y24.31337
G01 X68.98510 Y24.35490
G01 X68.99475 Y24.37847
G01 X69.01436 Y24.43247
G01 X69.03772 Y24.50570
G01 X69.04837 Y24.54177
G01 X69.06597 Y24.60651
G01 X69.08151 Y24.67266
G01 X69.09256 Y24.72818
G01 X69.05271 Y24.80639
G01 X68.98827 Y24.88599
G01 X68.94501 Y24.92925
G01 X68.86541 Y24.99369
G01 X68.77415 Y25.04019
G01 X68.68715 Y25.06351
G01 X68.68431 Y25.06295
G01 X68.67433 Y25.06107
G01 X68.60902 Y25.03986
G01 X68.37062 Y24.92084
G01 X68.32053 Y24.88442
G01 X68.23590 Y24.81220
G01 X66.98967 Y23.56598
G01 X66.96478 Y23.54225
G01 X66.93933 Y23.51919
G01 X66.91174 Y23.49874
G01 X66.88820 Y23.48201
G01 X66.85447 Y23.46047
G01 X66.82498 Y23.44281
G01 X66.79397 Y23.42813
G01 X66.73036 Y23.40179
G01 X66.69803 Y23.39021
G01 X66.66468 Y23.38188
G01 X66.59724 Y23.36847
G01 X66.56323 Y23.36341
G01 X66.52897 Y23.36171
G01 X66.49455 Y23.36087
G01 X48.75125 Y23.36087
G01 X48.71684 Y23.36171
G01 X48.68257 Y23.36341
G01 X48.64854 Y23.36847
G01 X48.58107 Y23.38188
G01 X48.54777 Y23.39021
G01 X48.51541 Y23.40179
G01 X48.45181 Y23.42813
G01 X48.42077 Y23.44281
G01 X48.39131 Y23.46047
G01 X48.33403 Y23.49874
G01 X48.30650 Y23.51917
G01 X48.28100 Y23.54228
G01 X48.25611 Y23.56598
G01 X45.32065 Y26.50146
G01 X45.30076 Y26.52058
G01 X45.28936 Y26.53112
G01 X45.17580 Y26.61682
G01 X45.16769 Y26.62180
G01 X45.11494 Y26.62752
G01 X45.06378 Y26.63125
G01 X45.00297 Y26.63351
G01 X44.99472 Y26.63389
G01 X44.93412 Y26.63684
G01 X44.83866 Y26.64949
G01 X44.77090 Y26.66188
G01 X44.74659 Y26.66757
G01 X44.62106 Y26.70814
G01 X44.56640 Y26.72835
G01 X44.55685 Y26.73341
G01 X44.41872 Y26.80773
G01 X44.39896 Y26.81875
G01 X44.36178 Y26.84649
G01 X44.24943 Y26.93628
G01 X44.23993 Y26.94527
G01 X44.19221 Y26.99500
G01 X44.12124 Y27.07664
G01 X44.09238 Y27.11598
G01 X44.05446 Y27.17336
G01 X44.01748 Y27.23580
G01 X43.98060 Y27.31174
G01 X43.95357 Y27.37509
G01 X43.94080 Y27.40966
G01 X43.90864 Y27.52533
G01 X43.89343 Y27.59264
G01 X43.89322 Y27.59376
G01 X43.87918 Y27.74882
G01 X43.87692 Y27.78329
G01 X43.87918 Y27.81773
G01 X43.89325 Y27.97285
G01 X43.89343 Y27.97392
G01 X43.90862 Y28.04120
G01 X43.93597 Y28.13958
G01 X43.94077 Y28.15682
G01 X43.95357 Y28.19144
G01 X43.98060 Y28.25484
G01 X44.01748 Y28.33076
G01 X44.05446 Y28.39320
G01 X44.09238 Y28.45060
G01 X44.12124 Y28.48995
G01 X44.19221 Y28.57156
G01 X44.23993 Y28.62134
G01 X44.24946 Y28.63028
G01 X44.36178 Y28.72010
G01 X44.39894 Y28.74781
G01 X44.41877 Y28.75888
G01 X44.55687 Y28.83315
G01 X44.56640 Y28.83818
G01 X44.62101 Y28.85837
G01 X44.74659 Y28.89899
G01 X44.77084 Y28.90465
G01 X44.83866 Y28.91707
G01 X44.93412 Y28.92975
G01 X44.99472 Y28.93269
G01 X45.00694 Y28.93318
G01 X45.06376 Y28.93498
G01 X45.11253 Y28.93818
G01 X45.17120 Y28.94402
G01 X45.22291 Y28.95093
G01 X45.30567 Y28.96482
G01 X45.44722 Y28.99932
G01 X45.44908 Y28.99990
G01 X45.48580 Y29.04682
G01 X45.53836 Y29.13074
G01 X45.53823 Y29.13124
G01 X45.53823 Y29.13127
G01 X45.53343 Y29.15461
G01 X45.50970 Y29.25532
G01 X45.49429 Y29.31242
G01 X45.48730 Y29.33518
G01 X45.47298 Y29.38842
G01 X45.47100 Y29.39698
G01 X45.45903 Y29.44212
G01 X45.43975 Y29.50661
G01 X45.43899 Y29.50917
G01 X45.42375 Y29.56089
G01 X45.41166 Y29.60790
G01 X45.40945 Y29.62822
G01 X45.40653 Y29.65949
G01 X45.40503 Y29.67534
G01 X45.40473 Y29.68192
G01 X45.40389 Y29.71633
G01 X45.40389 Y30.71181
G01 X45.40170 Y30.76700
G01 X45.39927 Y30.79799
G01 X45.36592 Y30.96634
G01 X45.36421 Y30.97170
G01 X45.35421 Y31.00571
G01 X45.34641 Y31.03439
G01 X45.33861 Y31.06142
G01 X45.33267 Y31.08090
G01 X45.34996 Y31.09675
G01 X45.39043 Y31.13188
G01 X45.39990 Y31.13965
G01 X45.43879 Y31.17356
G01 X45.46081 Y31.19393
G01 X45.49325 Y31.22225
G01 X45.50549 Y31.23231
G01 X45.53709 Y31.25994
G01 X45.55225 Y31.27414
G01 X45.58095 Y31.29929
G01 X45.59416 Y31.31011
G01 X45.62243 Y31.33495
G01 X45.63508 Y31.34684
G01 X45.66231 Y31.37074
G01 X45.67597 Y31.38196
G01 X45.70323 Y31.40589
G01 X45.71572 Y31.41763
G01 X45.74410 Y31.44254
G01 X45.75723 Y31.45331
G01 X45.78601 Y31.47851
G01 X45.80127 Y31.49278
G01 X45.83277 Y31.52034
G01 X45.84511 Y31.53048
G01 X45.87745 Y31.55872
G01 X45.89944 Y31.57909
G01 X45.93836 Y31.61300
G01 X45.94780 Y31.62077
G01 X45.98829 Y31.65593
G01 X46.02418 Y31.68882
G01 X46.02911 Y31.69332
G01 X46.07104 Y31.73132
G01 X46.07178 Y31.73828
G01 X46.07414 Y31.78631
G01 X46.07414 Y33.03632
G01 X46.07178 Y33.08435
G01 X46.06650 Y33.13799
G01 X46.04785 Y33.23172
G01 X46.04735 Y33.23207
G01 X45.99451 Y33.27238
G01 X45.92042 Y33.33240
G01 X45.87684 Y33.37023
G01 X45.87463 Y33.37226
G01 X45.83477 Y33.40693
G01 X45.81887 Y33.41983
G01 X45.77775 Y33.45585
G01 X45.76561 Y33.46733
G01 X45.71453 Y33.48783
G01 X45.66063 Y33.50711
G01 X45.60094 Y33.52524
G01 X45.54704 Y33.53875
G01 X45.49309 Y33.54950
G01 X45.43917 Y33.55753
G01 X45.38804 Y33.56258
G01 X45.33414 Y33.56522
G01 X45.30915 Y33.56583
G01 X44.75911 Y33.56583
G01 X44.73412 Y33.56522
G01 X44.68022 Y33.56258
G01 X44.62909 Y33.55753
G01 X44.57516 Y33.54950
G01 X44.52121 Y33.53875
G01 X44.46731 Y33.52524
G01 X44.40773 Y33.50713
G01 X44.35380 Y33.48785
G01 X44.30653 Y33.46906
G01 X44.29330 Y33.45336
G01 X44.25919 Y33.41163
G01 X44.23572 Y33.38127
G01 X44.22088 Y33.35466
G01 X44.19571 Y33.30698
G01 X44.17702 Y33.26885
G01 X44.16902 Y33.24348
G01 X44.15378 Y33.19176
G01 X44.14166 Y33.14472
G01 X44.13945 Y33.12443
G01 X44.13506 Y33.07734
G01 X44.13473 Y33.07073
G01 X44.13386 Y33.03634
G01 X44.13386 Y31.78633
G01 X44.13473 Y31.75192
G01 X44.13506 Y31.74534
G01 X44.13945 Y31.69822
G01 X44.14166 Y31.67792
G01 X44.15378 Y31.63088
G01 X44.16902 Y31.57917
G01 X44.17702 Y31.55380
G01 X44.19363 Y31.51966
G01 X44.19571 Y31.51567
G01 X44.22088 Y31.46799
G01 X44.23572 Y31.44137
G01 X44.25924 Y31.41095
G01 X44.29338 Y31.36924
G01 X44.31588 Y31.34308
G01 X44.34199 Y31.32060
G01 X44.38372 Y31.28646
G01 X44.41418 Y31.26291
G01 X44.44092 Y31.24803
G01 X44.48860 Y31.22283
G01 X44.52660 Y31.20421
G01 X44.55182 Y31.19626
G01 X44.60353 Y31.18100
G01 X44.61471 Y31.17780
G01 X44.65073 Y31.16886
G01 X44.67102 Y31.16665
G01 X44.71811 Y31.16225
G01 X44.72472 Y31.16192
G01 X44.75911 Y31.16106
G01 X44.95464 Y31.16106
G01 X45.06566 Y31.15227
G01 X45.12685 Y31.14257
G01 X45.30915 Y31.09058
G01 X45.33267 Y31.08090
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.07104 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.07104 Y31.73132
G01 X46.53414 Y31.73132
G01 X46.57912 Y31.68633
G01 X46.61885 Y31.64465
G01 X46.66772 Y31.59075
G01 X46.72090 Y31.52616
G01 X46.73193 Y31.51130
G01 X46.76147 Y31.47419
G01 X46.79748 Y31.43213
G01 X46.83675 Y31.39126
G01 X46.86881 Y31.36164
G01 X46.91062 Y31.32763
G01 X46.94597 Y31.30236
G01 X46.99408 Y31.27211
G01 X47.02413 Y31.25555
G01 X47.04293 Y31.24473
G01 X47.09682 Y31.21239
G01 X47.15933 Y31.17048
G01 X47.17313 Y31.16025
G01 X47.18448 Y31.12177
G01 X47.19660 Y31.07473
G01 X47.19878 Y31.05443
G01 X47.20320 Y31.00731
G01 X47.20353 Y31.00074
G01 X47.20437 Y30.96634
G01 X47.20437 Y29.71633
G01 X47.20353 Y29.68227
G01 X47.20353 Y29.68192
G01 X47.20297 Y29.62779
G01 X47.20300 Y29.62654
G01 X47.20320 Y29.59520
G01 X47.20256 Y29.55537
G01 X47.20373 Y29.49871
G01 X47.20866 Y29.41052
G01 X47.20950 Y29.39741
G01 X47.21295 Y29.34709
G01 X47.21425 Y29.32522
G01 X47.21567 Y29.29624
G01 X47.21565 Y29.29622
G01 X47.18656 Y29.25271
G01 X47.15237 Y29.21100
G01 X47.08445 Y29.14311
G01 X47.04277 Y29.10892
G01 X46.96292 Y29.05553
G01 X46.91537 Y29.03010
G01 X46.82662 Y28.99335
G01 X46.77503 Y28.97770
G01 X46.68082 Y28.95898
G01 X46.62718 Y28.95367
G01 X46.57915 Y28.95131
G01 X46.02913 Y28.95131
G01 X45.98110 Y28.95367
G01 X45.92746 Y28.95898
G01 X45.83325 Y28.97770
G01 X45.78166 Y28.99335
G01 X45.69292 Y29.03010
G01 X45.64537 Y29.05553
G01 X45.56551 Y29.10892
G01 X45.53823 Y29.13124
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.21425 Y29.32522 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.21425 Y29.32522
G01 X47.21565 Y29.29622
G01 X47.21570 Y29.29566
G01 X47.26759 Y29.23803
G01 X47.35047 Y29.17783
G01 X47.44409 Y29.13612
G01 X47.50228 Y29.11722
G01 X47.57701 Y29.09929
G01 X47.65364 Y29.09327
G01 X47.66731 Y29.09327
G01 X47.86144 Y29.06404
G01 X48.04907 Y29.00612
G01 X48.22593 Y28.92096
G01 X48.38819 Y28.81034
G01 X48.53210 Y28.67679
G01 X48.65453 Y28.52330
G01 X48.75273 Y28.35324
G01 X48.78260 Y28.27714
G01 X48.83622 Y28.17674
G01 X48.86230 Y28.13917
G01 X48.91965 Y28.07082
G01 X48.98849 Y28.01400
G01 X49.06647 Y27.97059
G01 X49.12242 Y27.94583
G01 X49.21998 Y27.91436
G01 X49.32194 Y27.90392
G01 X49.42387 Y27.91489
G01 X49.47071 Y27.92495
G01 X49.48031 Y27.93572
G01 X49.48148 Y27.93704
G01 X49.54940 Y28.01291
G01 X49.64808 Y28.14687
G01 X49.65590 Y28.16013
G01 X49.66377 Y28.17321
G01 X49.68798 Y28.20811
G01 X49.72341 Y28.26472
G01 X49.76944 Y28.34242
G01 X49.80738 Y28.39980
G01 X49.83624 Y28.43915
G01 X49.90721 Y28.52078
G01 X49.95493 Y28.57051
G01 X49.96441 Y28.57946
G01 X50.07678 Y28.66927
G01 X50.11394 Y28.69703
G01 X50.13377 Y28.70808
G01 X50.27187 Y28.78235
G01 X50.28137 Y28.78740
G01 X50.33601 Y28.80760
G01 X50.46159 Y28.84816
G01 X50.48584 Y28.85385
G01 X50.55366 Y28.86625
G01 X50.64914 Y28.87892
G01 X50.70972 Y28.88189
G01 X50.75928 Y28.88258
G01 X50.77855 Y28.88215
G01 X50.86542 Y28.88555
G01 X50.92410 Y28.89139
G01 X50.93720 Y28.89281
G01 X51.01706 Y28.90216
G01 X51.19224 Y28.93942
G01 X51.19389 Y28.93993
G01 X51.28127 Y28.90371
G01 X51.41957 Y28.82977
G01 X51.49946 Y28.77643
G01 X51.62067 Y28.67691
G01 X51.68859 Y28.60900
G01 X51.78808 Y28.48776
G01 X51.84144 Y28.40790
G01 X51.91538 Y28.26963
G01 X51.95214 Y28.18088
G01 X51.99768 Y28.03079
G01 X52.01414 Y27.94791
G01 X52.01414 Y27.63277
G01 X52.06118 Y27.53325
G01 X52.10243 Y27.45596
G01 X52.18554 Y27.31730
G01 X52.22643 Y27.25601
G01 X52.32089 Y27.12868
G01 X52.36268 Y27.07773
G01 X52.46814 Y26.96137
G01 X52.51302 Y26.91649
G01 X52.62938 Y26.81103
G01 X52.68033 Y26.76925
G01 X52.80766 Y26.67479
G01 X52.86895 Y26.63389
G01 X53.00761 Y26.55078
G01 X53.08490 Y26.50956
G01 X53.21794 Y26.44662
G01 X53.23611 Y26.44481
G01 X53.33217 Y26.44481
G01 X53.48823 Y26.46023
G01 X53.58246 Y26.47895
G01 X53.73252 Y26.52447
G01 X53.82127 Y26.56125
G01 X53.95957 Y26.63516
G01 X54.03946 Y26.68850
G01 X54.16067 Y26.78802
G01 X54.22859 Y26.85591
G01 X54.32808 Y26.97717
G01 X54.38144 Y27.05706
G01 X54.45538 Y27.19533
G01 X54.49214 Y27.28408
G01 X54.53768 Y27.43414
G01 X54.55640 Y27.52835
G01 X54.55673 Y27.53150
G01 X54.57179 Y27.68444
G01 X54.57179 Y27.78050
G01 X54.55640 Y27.93656
G01 X54.53768 Y28.03079
G01 X54.49214 Y28.18088
G01 X54.45538 Y28.26963
G01 X54.38144 Y28.40790
G01 X54.32808 Y28.48776
G01 X54.22859 Y28.60900
G01 X54.16067 Y28.67691
G01 X54.03946 Y28.77643
G01 X53.95957 Y28.82977
G01 X53.82127 Y28.90371
G01 X53.73252 Y28.94047
G01 X53.58246 Y28.98598
G01 X53.48823 Y29.00473
G01 X53.33217 Y29.02009
G01 X53.23611 Y29.02009
G01 X53.08005 Y29.00473
G01 X52.98581 Y28.98598
G01 X52.83575 Y28.94047
G01 X52.74700 Y28.90371
G01 X52.60870 Y28.82977
G01 X52.52882 Y28.77643
G01 X52.40761 Y28.67691
G01 X52.33969 Y28.60900
G01 X52.24020 Y28.48776
G01 X52.18683 Y28.40790
G01 X52.11289 Y28.26963
G01 X52.07614 Y28.18088
G01 X52.03060 Y28.03079
G01 X52.01414 Y27.94791
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.21794 Y26.44662 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.21794 Y26.44662
G01 X53.61495 Y26.04964
G01 X53.78302 Y25.88154
G01 X57.19830 Y25.88157
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.25182 Y27.82274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.25182 Y27.82274
G01 X55.25022 Y27.82063
G01 X55.22581 Y27.81255
G01 X55.16602 Y27.79950
G01 X55.06417 Y27.78819
G01 X54.96221 Y27.79838
G01 X54.86460 Y27.82952
G01 X54.80857 Y27.85408
G01 X54.73026 Y27.89736
G01 X54.66115 Y27.95413
G01 X54.60349 Y28.02256
G01 X54.57717 Y28.06033
G01 X54.52302 Y28.16152
G01 X54.46770 Y28.30247
G01 X54.36953 Y28.47252
G01 X54.24710 Y28.62601
G01 X54.10319 Y28.75954
G01 X53.94093 Y28.87018
G01 X53.76407 Y28.95532
G01 X53.57644 Y29.01321
G01 X53.37466 Y29.04364
G01 X53.31269 Y29.04849
G01 X53.23796 Y29.06645
G01 X53.17977 Y29.08535
G01 X53.08614 Y29.12700
G01 X53.00326 Y29.18723
G01 X52.93468 Y29.26338
G01 X52.93374 Y29.26467
G01 X52.93369 Y29.26663
G01 X52.93255 Y29.33744
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.28610 Y29.17272 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.28610 Y29.17272
G01 X51.30304 Y29.11181
G01 X51.30378 Y29.10927
G01 X51.30400 Y29.10844
G01 X51.38318 Y29.05553
G01 X51.43072 Y29.03010
G01 X51.51947 Y28.99335
G01 X51.57106 Y28.97770
G01 X51.66527 Y28.95898
G01 X51.71891 Y28.95367
G01 X51.76694 Y28.95131
G01 X52.31693 Y28.95131
G01 X52.36496 Y28.95367
G01 X52.41861 Y28.95898
G01 X52.51282 Y28.97770
G01 X52.56440 Y28.99335
G01 X52.65315 Y29.03010
G01 X52.70070 Y29.05553
G01 X52.78058 Y29.10892
G01 X52.82224 Y29.14311
G01 X52.89016 Y29.21100
G01 X52.92437 Y29.25271
G01 X52.93369 Y29.26663
G01 X52.93372 Y29.26665
G01 X52.93255 Y29.33744
G01 X52.93156 Y29.35713
G01 X52.93044 Y29.41890
G01 X52.93161 Y29.50173
G01 X52.93438 Y29.55720
G01 X52.93466 Y29.56017
G01 X52.93705 Y29.60031
G01 X52.93793 Y29.62807
G01 X52.94063 Y29.67127
G01 X52.94101 Y29.67529
G01 X52.94134 Y29.68192
G01 X52.94218 Y29.71633
G01 X52.94218 Y30.96634
G01 X52.94134 Y31.00074
G01 X52.94101 Y31.00731
G01 X52.93659 Y31.05443
G01 X52.93440 Y31.07470
G01 X52.92229 Y31.12177
G01 X52.91093 Y31.16025
G01 X52.89714 Y31.17048
G01 X52.83453 Y31.21247
G01 X52.78061 Y31.24478
G01 X52.76194 Y31.25555
G01 X52.73194 Y31.27208
G01 X52.68383 Y31.30231
G01 X52.64837 Y31.32766
G01 X52.60654 Y31.36170
G01 X52.57456 Y31.39126
G01 X52.53527 Y31.43215
G01 X52.49925 Y31.47419
G01 X52.46974 Y31.51130
G01 X52.45871 Y31.52619
G01 X52.40550 Y31.59078
G01 X52.35663 Y31.64468
G01 X52.31690 Y31.68636
G01 X52.27195 Y31.73132
G01 X51.80885 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.07048 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.07048 Y31.08090
G01 X51.04693 Y31.09060
G01 X50.86466 Y31.14257
G01 X50.80347 Y31.15227
G01 X50.69245 Y31.16106
G01 X50.49692 Y31.16106
G01 X50.46253 Y31.16192
G01 X50.45592 Y31.16225
G01 X50.40883 Y31.16665
G01 X50.38849 Y31.16886
G01 X50.35252 Y31.17780
G01 X50.34134 Y31.18100
G01 X50.28963 Y31.19626
G01 X50.26441 Y31.20421
G01 X50.22641 Y31.22283
G01 X50.17873 Y31.24803
G01 X50.15196 Y31.26291
G01 X50.12153 Y31.28646
G01 X50.07980 Y31.32060
G01 X50.05369 Y31.34305
G01 X50.03118 Y31.36924
G01 X49.99705 Y31.41095
G01 X49.97353 Y31.44137
G01 X49.95869 Y31.46799
G01 X49.93352 Y31.51567
G01 X49.93139 Y31.51973
G01 X49.91480 Y31.55382
G01 X49.90680 Y31.57917
G01 X49.89156 Y31.63088
G01 X49.87944 Y31.67792
G01 X49.87726 Y31.69822
G01 X49.87284 Y31.74536
G01 X49.87251 Y31.75192
G01 X49.87167 Y31.78633
G01 X49.87167 Y33.03634
G01 X49.87251 Y33.07073
G01 X49.87284 Y33.07731
G01 X49.87726 Y33.12443
G01 X49.87944 Y33.14470
G01 X49.89156 Y33.19176
G01 X49.90680 Y33.24348
G01 X49.91480 Y33.26885
G01 X49.93350 Y33.30698
G01 X49.95869 Y33.35466
G01 X49.97353 Y33.38127
G01 X49.99700 Y33.41163
G01 X50.03111 Y33.45336
G01 X50.04434 Y33.46906
G01 X50.09161 Y33.48785
G01 X50.14554 Y33.50713
G01 X50.20512 Y33.52524
G01 X50.25902 Y33.53875
G01 X50.31297 Y33.54950
G01 X50.36690 Y33.55753
G01 X50.41803 Y33.56258
G01 X50.47193 Y33.56522
G01 X50.49692 Y33.56583
G01 X51.04693 Y33.56583
G01 X51.07192 Y33.56522
G01 X51.12582 Y33.56258
G01 X51.17695 Y33.55753
G01 X51.23088 Y33.54950
G01 X51.28483 Y33.53875
G01 X51.33873 Y33.52524
G01 X51.39831 Y33.50713
G01 X51.45224 Y33.48785
G01 X51.50342 Y33.46733
G01 X51.51566 Y33.45577
G01 X51.55676 Y33.41976
G01 X51.57253 Y33.40698
G01 X51.61236 Y33.37233
G01 X51.61449 Y33.37035
G01 X51.65811 Y33.33251
G01 X51.73232 Y33.27238
G01 X51.78305 Y33.23368
G01 X51.78516 Y33.23207
G01 X51.78564 Y33.23174
G01 X51.80428 Y33.13799
G01 X51.80957 Y33.08435
G01 X51.81193 Y33.03632
G01 X51.81193 Y31.78631
G01 X51.80957 Y31.73828
G01 X51.80885 Y31.73132
G01 X51.76694 Y31.69332
G01 X51.76199 Y31.68882
G01 X51.72610 Y31.65593
G01 X51.68561 Y31.62077
G01 X51.67616 Y31.61300
G01 X51.63725 Y31.57909
G01 X51.61526 Y31.55872
G01 X51.58279 Y31.53040
G01 X51.57058 Y31.52037
G01 X51.53898 Y31.49268
G01 X51.52382 Y31.47851
G01 X51.49509 Y31.45336
G01 X51.48191 Y31.44254
G01 X51.45361 Y31.41770
G01 X51.44104 Y31.40589
G01 X51.41373 Y31.38191
G01 X51.40012 Y31.37074
G01 X51.37281 Y31.34676
G01 X51.36024 Y31.33495
G01 X51.33194 Y31.31011
G01 X51.31876 Y31.29929
G01 X51.29003 Y31.27414
G01 X51.27487 Y31.25997
G01 X51.24327 Y31.23228
G01 X51.23105 Y31.22225
G01 X51.19859 Y31.19393
G01 X51.17660 Y31.17356
G01 X51.13768 Y31.13965
G01 X51.12824 Y31.13188
G01 X51.08775 Y31.09672
G01 X51.07048 Y31.08090
G01 X51.07642 Y31.06142
G01 X51.08427 Y31.03426
G01 X51.09202 Y31.00571
G01 X51.10205 Y30.97158
G01 X51.10370 Y30.96634
G01 X51.13705 Y30.79799
G01 X51.13949 Y30.76700
G01 X51.14167 Y30.71181
G01 X51.14167 Y29.71633
G01 X51.14251 Y29.68192
G01 X51.14284 Y29.67534
G01 X51.14726 Y29.62822
G01 X51.14944 Y29.60793
G01 X51.16156 Y29.56089
G01 X51.16471 Y29.55024
G01 X51.17680 Y29.50917
G01 X51.19458 Y29.45657
G01 X51.19956 Y29.44356
G01 X51.21716 Y29.39182
G01 X51.23090 Y29.34577
G01 X51.23959 Y29.31857
G01 X51.25130 Y29.28385
G01 X51.25780 Y29.26376
G01 X51.28610 Y29.17272
G01 X51.30306 Y29.11184
G01 X51.30304 Y29.11181
G01 X51.29255 Y29.08296
G01 X51.23822 Y28.99614
G01 X51.20052 Y28.94798
G01 X51.19224 Y28.93942
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.47071 Y27.92495 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.47071 Y27.92495
G01 X49.45651 Y27.78050
G01 X49.45651 Y27.68444
G01 X49.47188 Y27.52835
G01 X49.49060 Y27.43414
G01 X49.53614 Y27.28408
G01 X49.57289 Y27.19533
G01 X49.64683 Y27.05706
G01 X49.70020 Y26.97717
G01 X49.79969 Y26.85591
G01 X49.86761 Y26.78802
G01 X49.98882 Y26.68850
G01 X50.06870 Y26.63516
G01 X50.20700 Y26.56125
G01 X50.29575 Y26.52447
G01 X50.44581 Y26.47895
G01 X50.54005 Y26.46023
G01 X50.69611 Y26.44481
G01 X50.79217 Y26.44481
G01 X50.83921 Y26.44946
G01 X51.93486 Y25.35386
G01 X52.38757 Y24.90113
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.01179 Y18.22990 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.01179 Y18.22990
G01 X57.95281 Y18.20076
G01 X57.90409 Y18.10960
G01 X57.86734 Y18.02085
G01 X57.82530 Y17.88230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.82533 Y18.23056 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.82533 Y18.23056
G01 X57.82530 Y17.88230
G01 X57.82352 Y17.87021
G01 X57.81415 Y17.77546
G01 X57.80645 Y17.61864
G01 X57.80645 Y17.52631
G01 X57.81415 Y17.36947
G01 X57.82352 Y17.27470
G01 X57.82530 Y17.26261
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.42687 Y16.33505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.42687 Y16.33505
G01 X59.37366 Y16.31893
G01 X59.27943 Y16.30021
G01 X59.12337 Y16.28481
G01 X59.02731 Y16.28481
G01 X58.87125 Y16.30021
G01 X58.77701 Y16.31893
G01 X58.62695 Y16.36447
G01 X58.53820 Y16.40122
G01 X58.47381 Y16.43564
G01 X58.39990 Y16.47514
G01 X58.32002 Y16.52850
G01 X58.19881 Y16.62799
G01 X58.13089 Y16.69591
G01 X58.03140 Y16.81715
G01 X57.97803 Y16.89703
G01 X57.90409 Y17.03533
G01 X57.86734 Y17.12408
G01 X57.82530 Y17.26261
G01 X57.82533 Y16.77247
G01 X57.81593 Y16.67686
G01 X57.78804 Y16.58494
G01 X57.74829 Y16.51057
G01 X57.74275 Y16.50023
G01 X57.68182 Y16.42599
G01 X57.60757 Y16.36505
G01 X57.52286 Y16.31976
G01 X57.43094 Y16.29188
G01 X57.41890 Y16.29068
G01 X57.74928 Y15.96030
G01 X59.51143 Y15.96030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.25445 Y14.28032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.25445 Y14.28032
G01 X62.89540 Y14.28032
G01 X64.53060 Y12.64510
G01 X64.52369 Y12.57494
G01 X64.52369 Y12.47888
G01 X64.53908 Y12.32282
G01 X64.55780 Y12.22861
G01 X64.60334 Y12.07852
G01 X64.64010 Y11.98978
G01 X64.71401 Y11.85147
G01 X64.76738 Y11.77161
G01 X64.86687 Y11.65038
G01 X64.93479 Y11.58246
G01 X65.05602 Y11.48297
G01 X65.13590 Y11.42960
G01 X65.27421 Y11.35566
G01 X65.36295 Y11.31891
G01 X65.51302 Y11.27339
G01 X65.59580 Y11.25691
G01 X66.02681 Y11.25691
G01 X66.10964 Y11.24045
G01 X66.25973 Y11.19491
G01 X66.34847 Y11.15815
G01 X66.48678 Y11.08424
G01 X66.56664 Y11.03087
G01 X66.68787 Y10.93138
G01 X66.75579 Y10.86346
G01 X66.85528 Y10.74223
G01 X66.90865 Y10.66235
G01 X66.98259 Y10.52404
G01 X67.01934 Y10.43530
G01 X67.06486 Y10.28523
G01 X67.08360 Y10.19102
G01 X67.09897 Y10.03494
G01 X67.09897 Y9.93888
G01 X67.08360 Y9.78282
G01 X67.06486 Y9.68861
G01 X67.01934 Y9.53852
G01 X66.98259 Y9.44978
G01 X66.90865 Y9.31147
G01 X66.85528 Y9.23161
G01 X66.75579 Y9.11038
G01 X66.68787 Y9.04246
G01 X66.56664 Y8.94297
G01 X66.48678 Y8.88960
G01 X66.34847 Y8.81566
G01 X66.25973 Y8.77891
G01 X66.10964 Y8.73339
G01 X66.01543 Y8.71465
G01 X65.85937 Y8.69928
G01 X65.76331 Y8.69928
G01 X65.60723 Y8.71465
G01 X65.51302 Y8.73339
G01 X65.36295 Y8.77891
G01 X65.27421 Y8.81566
G01 X65.13590 Y8.88960
G01 X65.05602 Y8.94297
G01 X64.93479 Y9.04246
G01 X64.86687 Y9.11038
G01 X64.76738 Y9.23161
G01 X64.71401 Y9.31147
G01 X64.64010 Y9.44978
G01 X64.60334 Y9.53852
G01 X64.55780 Y9.68861
G01 X64.53908 Y9.78282
G01 X64.52369 Y9.93888
G01 X64.52369 Y10.03494
G01 X64.53908 Y10.19102
G01 X64.55780 Y10.28523
G01 X64.60334 Y10.43530
G01 X64.64010 Y10.52404
G01 X64.71401 Y10.66235
G01 X64.76738 Y10.74223
G01 X64.86687 Y10.86346
G01 X64.93479 Y10.93138
G01 X65.05602 Y11.03087
G01 X65.13590 Y11.08424
G01 X65.27421 Y11.15815
G01 X65.36295 Y11.19491
G01 X65.51302 Y11.24045
G01 X65.59580 Y11.25691
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.02681 Y11.25691 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.02681 Y11.25691
G01 X66.10964 Y11.27339
G01 X66.25973 Y11.31891
G01 X66.34847 Y11.35566
G01 X66.48678 Y11.42960
G01 X66.56664 Y11.48297
G01 X66.68787 Y11.58246
G01 X66.75579 Y11.65038
G01 X66.85528 Y11.77161
G01 X66.90865 Y11.85147
G01 X66.98259 Y11.98978
G01 X67.01934 Y12.07852
G01 X67.06486 Y12.22861
G01 X67.08360 Y12.32282
G01 X67.09897 Y12.47888
G01 X67.09897 Y12.57494
G01 X67.08360 Y12.73102
G01 X67.06486 Y12.82523
G01 X67.01934 Y12.97530
G01 X66.98259 Y13.06404
G01 X66.90865 Y13.20235
G01 X66.85528 Y13.28223
G01 X66.75579 Y13.40346
G01 X66.68787 Y13.47138
G01 X66.56664 Y13.57087
G01 X66.48678 Y13.62424
G01 X66.34847 Y13.69815
G01 X66.25973 Y13.73491
G01 X66.10964 Y13.78045
G01 X66.01543 Y13.79917
G01 X65.85937 Y13.81456
G01 X65.76331 Y13.81456
G01 X65.73938 Y13.81220
G01 X64.45846 Y15.09312
G01 X63.88965 Y15.32873
G01 X63.86565 Y15.33937
G01 X63.79976 Y15.37054
G01 X63.76110 Y15.39117
G01 X63.70042 Y15.42751
G01 X63.66938 Y15.44824
G01 X63.61368 Y15.48957
G01 X63.61302 Y15.49002
G01 X63.59946 Y15.50016
G01 X63.58681 Y15.51006
G01 X63.54617 Y15.54339
G01 X63.53352 Y15.55329
G01 X63.51993 Y15.56343
G01 X63.51930 Y15.56389
G01 X63.46359 Y15.60521
G01 X63.43255 Y15.62594
G01 X63.37187 Y15.66229
G01 X63.33324 Y15.68291
G01 X63.26738 Y15.71408
G01 X63.24332 Y15.72472
G01 X62.67452 Y15.96033
G01 X61.31933 Y15.96030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.33286 Y16.35352 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.33286 Y16.35352
G01 X61.42590 Y16.23978
G01 X61.42656 Y16.23902
G01 X61.50114 Y16.23165
G01 X62.40319 Y16.23165
G01 X62.67452 Y15.96033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.59110 Y17.83150 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.59110 Y17.83150
G01 X63.63314 Y17.97005
G01 X63.66989 Y18.05880
G01 X63.71861 Y18.14996
G01 X63.77759 Y18.17910
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.59113 Y18.17976 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.59113 Y18.17976
G01 X63.59110 Y17.83150
G01 X63.58932 Y17.81941
G01 X63.57995 Y17.72466
G01 X63.57225 Y17.56784
G01 X63.57225 Y17.47552
G01 X63.57533 Y17.41306
G01 X63.61818 Y17.32245
G01 X63.65943 Y17.24516
G01 X63.74254 Y17.10650
G01 X63.78343 Y17.04521
G01 X63.87787 Y16.91788
G01 X63.91968 Y16.86693
G01 X64.02514 Y16.75057
G01 X64.07002 Y16.70569
G01 X64.17154 Y16.61367
G01 X64.19153 Y16.60650
G01 X64.25303 Y16.58781
G01 X64.40984 Y16.54852
G01 X64.46090 Y16.53833
G01 X64.61772 Y16.51509
G01 X64.66275 Y16.51065
G01 X64.81960 Y16.50292
G01 X64.86265 Y16.50292
G01 X65.01950 Y16.51065
G01 X65.06453 Y16.51509
G01 X65.22135 Y16.53833
G01 X65.27240 Y16.54852
G01 X65.42922 Y16.58781
G01 X65.49072 Y16.60650
G01 X65.64756 Y16.66264
G01 X65.72506 Y16.69482
G01 X65.88190 Y16.76899
G01 X65.88655 Y16.77122
G01 X65.88983 Y16.87219
G01 X65.91098 Y17.03871
G01 X65.91116 Y17.03955
G01 X65.92186 Y17.09487
G01 X65.92437 Y17.11115
G01 X65.94210 Y17.19352
G01 X65.96161 Y17.26373
G01 X65.97682 Y17.33104
G01 X65.97700 Y17.33213
G01 X65.99105 Y17.48722
G01 X65.99333 Y17.52167
G01 X65.99105 Y17.55613
G01 X65.97700 Y17.71125
G01 X65.97682 Y17.71232
G01 X65.96163 Y17.77960
G01 X65.92945 Y17.89530
G01 X65.91667 Y17.92984
G01 X65.88965 Y17.99324
G01 X65.85277 Y18.06916
G01 X65.81579 Y18.13160
G01 X65.77786 Y18.18900
G01 X65.74901 Y18.22832
G01 X65.67804 Y18.30996
G01 X65.63031 Y18.35969
G01 X65.62082 Y18.36866
G01 X65.54614 Y18.42835
G01 X65.50847 Y18.45847
G01 X65.47129 Y18.48623
G01 X65.45147 Y18.49728
G01 X65.31337 Y18.57155
G01 X65.30385 Y18.57658
G01 X65.24924 Y18.59677
G01 X65.17088 Y18.62212
G01 X65.12369 Y18.63736
G01 X65.09940 Y18.64305
G01 X65.03159 Y18.65545
G01 X64.93611 Y18.66812
G01 X64.87553 Y18.67109
G01 X64.80672 Y18.67109
G01 X64.74614 Y18.66812
G01 X64.65066 Y18.65545
G01 X64.58284 Y18.64305
G01 X64.55859 Y18.63736
G01 X64.43301 Y18.59677
G01 X64.37837 Y18.57658
G01 X64.36887 Y18.57155
G01 X64.23077 Y18.49728
G01 X64.21094 Y18.48621
G01 X64.17378 Y18.45847
G01 X64.06651 Y18.37272
G01 X64.05110 Y18.36076
G01 X63.99443 Y18.31798
G01 X63.97535 Y18.30404
G01 X63.92356 Y18.26741
G01 X63.85907 Y18.22616
G01 X63.77759 Y18.17910
G01 X63.71858 Y18.14991
G01 X63.71670 Y18.14900
G01 X63.65618 Y18.15979
G01 X63.59740 Y18.17676
G01 X63.59163 Y18.17899
G01 X63.59113 Y18.17976
G01 X63.50119 Y18.32167
G01 X63.46471 Y18.39246
G01 X63.44350 Y18.43083
G01 X63.40434 Y18.49705
G01 X63.37784 Y18.53845
G01 X63.31790 Y18.59840
G01 X63.24541 Y18.64224
G01 X63.15928 Y18.66871
G01 X63.14178 Y18.67076
G01 X63.10114 Y18.67193
G01 X61.50111 Y18.67193
G01 X61.46047 Y18.67076
G01 X61.44297 Y18.66871
G01 X61.35684 Y18.64224
G01 X61.28435 Y18.59840
G01 X61.22441 Y18.53845
G01 X61.18057 Y18.46596
G01 X61.15410 Y18.37983
G01 X61.15204 Y18.36233
G01 X61.15087 Y18.32167
G01 X61.15087 Y16.72167
G01 X61.15204 Y16.68103
G01 X61.15410 Y16.66353
G01 X61.18057 Y16.57742
G01 X61.22570 Y16.50300
G01 X61.29248 Y16.40694
G01 X61.33286 Y16.35352
G01 X61.42593 Y16.23980
G01 X61.42590 Y16.23978
G01 X61.41993 Y16.16927
G01 X61.39027 Y16.07128
G01 X61.36652 Y16.01489
G01 X61.34249 Y15.97123
G01 X61.31933 Y15.96030
G01 X61.11971 Y15.86622
G01 X61.05849 Y15.84918
G01 X60.90287 Y15.82302
G01 X60.88018 Y15.82172
G01 X60.84005 Y15.82058
G01 X60.00584 Y15.82058
G01 X59.89494 Y15.82937
G01 X59.83376 Y15.83904
G01 X59.58108 Y15.92342
G01 X59.51989 Y15.95459
G01 X59.51143 Y15.96030
G01 X59.50907 Y15.96190
G01 X59.46403 Y16.03993
G01 X59.43238 Y16.13737
G01 X59.42167 Y16.23922
G01 X59.42167 Y16.30041
G01 X59.42499 Y16.33287
G01 X59.42687 Y16.33505
G01 X59.42690 Y16.33508
G01 X59.50500 Y16.42606
G01 X59.56652 Y16.48725
G01 X59.60028 Y16.51895
G01 X59.64493 Y16.55852
G01 X59.68753 Y16.59353
G01 X59.72832 Y16.62451
G01 X59.73081 Y16.62642
G01 X59.73170 Y16.62710
G01 X59.74267 Y16.63569
G01 X59.85502 Y16.72550
G01 X59.86451 Y16.73447
G01 X59.91224 Y16.78420
G01 X59.98321 Y16.86584
G01 X60.01206 Y16.90516
G01 X60.04999 Y16.96256
G01 X60.08697 Y17.02500
G01 X60.12385 Y17.10092
G01 X60.15087 Y17.16429
G01 X60.16365 Y17.19886
G01 X60.19581 Y17.31453
G01 X60.21102 Y17.38184
G01 X60.21120 Y17.38293
G01 X60.22527 Y17.53802
G01 X60.22753 Y17.57249
G01 X60.22527 Y17.60693
G01 X60.21120 Y17.76203
G01 X60.21102 Y17.76312
G01 X60.19583 Y17.83040
G01 X60.16365 Y17.94610
G01 X60.15087 Y17.98064
G01 X60.12385 Y18.04404
G01 X60.08697 Y18.11996
G01 X60.04999 Y18.18240
G01 X60.01206 Y18.23980
G01 X59.98321 Y18.27912
G01 X59.91224 Y18.36076
G01 X59.86451 Y18.41049
G01 X59.85504 Y18.41946
G01 X59.81176 Y18.45402
G01 X59.74267 Y18.50927
G01 X59.70549 Y18.53703
G01 X59.68567 Y18.54808
G01 X59.54757 Y18.62235
G01 X59.53807 Y18.62738
G01 X59.48344 Y18.64757
G01 X59.40343 Y18.67346
G01 X59.35786 Y18.68816
G01 X59.33360 Y18.69385
G01 X59.26579 Y18.70625
G01 X59.17031 Y18.71892
G01 X59.10973 Y18.72189
G01 X59.04092 Y18.72189
G01 X58.98034 Y18.71892
G01 X58.88486 Y18.70625
G01 X58.81704 Y18.69385
G01 X58.79279 Y18.68816
G01 X58.66721 Y18.64757
G01 X58.61257 Y18.62738
G01 X58.60307 Y18.62235
G01 X58.46497 Y18.54808
G01 X58.44514 Y18.53701
G01 X58.40798 Y18.50927
G01 X58.30071 Y18.42352
G01 X58.28530 Y18.41156
G01 X58.22863 Y18.36878
G01 X58.20955 Y18.35484
G01 X58.15776 Y18.31821
G01 X58.09327 Y18.27696
G01 X58.01179 Y18.22990
G01 X57.95278 Y18.20071
G01 X57.95090 Y18.19980
G01 X57.89038 Y18.21059
G01 X57.83160 Y18.22756
G01 X57.82583 Y18.22979
G01 X57.82533 Y18.23056
G01 X57.73539 Y18.37249
G01 X57.69891 Y18.44326
G01 X57.67770 Y18.48163
G01 X57.63854 Y18.54785
G01 X57.61204 Y18.58925
G01 X57.55210 Y18.64920
G01 X57.47961 Y18.69304
G01 X57.39348 Y18.71951
G01 X57.37598 Y18.72156
G01 X57.33531 Y18.72273
G01 X55.73531 Y18.72273
G01 X55.69467 Y18.72156
G01 X55.67717 Y18.71951
G01 X55.59104 Y18.69304
G01 X55.51855 Y18.64920
G01 X55.45861 Y18.58925
G01 X55.41477 Y18.51676
G01 X55.38830 Y18.43063
G01 X55.38624 Y18.41313
G01 X55.38507 Y18.37249
G01 X55.38507 Y16.77247
G01 X55.38624 Y16.73183
G01 X55.38830 Y16.71433
G01 X55.41477 Y16.62822
G01 X55.43950 Y16.58489
G01 X55.45861 Y16.55568
G01 X55.51855 Y16.49576
G01 X55.62035 Y16.43739
G01 X55.72901 Y16.38662
G01 X55.73534 Y16.38370
G01 X55.77732 Y16.36449
G01 X55.78210 Y16.35164
G01 X55.82764 Y16.15886
G01 X55.83155 Y16.11964
G01 X55.83506 Y16.04953
G01 X55.83506 Y15.98631
G01 X55.83592 Y15.95187
G01 X55.83760 Y15.91758
G01 X55.84265 Y15.88360
G01 X55.85606 Y15.81616
G01 X55.86442 Y15.78281
G01 X55.87598 Y15.75050
G01 X55.90232 Y15.68690
G01 X55.91700 Y15.65583
G01 X55.93465 Y15.62640
G01 X55.97293 Y15.56912
G01 X55.97392 Y15.56777
G01 X55.99335 Y15.54158
G01 X56.01647 Y15.51608
G01 X56.04016 Y15.49119
G01 X56.11334 Y15.41801
G01 X56.21347 Y15.31786
G01 X56.28565 Y15.23328
G01 X56.32205 Y15.18316
G01 X56.44110 Y14.94479
G01 X56.46231 Y14.87948
G01 X56.46518 Y14.86851
G01 X56.44146 Y14.77971
G01 X56.40064 Y14.69960
G01 X56.38438 Y14.69071
G01 X56.29668 Y14.64281
G01 X56.23549 Y14.61743
G01 X56.02475 Y14.56132
G01 X55.97852 Y14.55586
G01 X55.89579 Y14.55098
G01 X52.69547 Y14.55098
G01 X52.58457 Y14.55977
G01 X52.52338 Y14.56945
G01 X52.51741 Y14.57042
G01 X52.40908 Y14.65289
G01 X52.39768 Y14.66343
G01 X52.37779 Y14.68256
G01 X51.57596 Y15.48441
G01 X51.50375 Y15.56902
G01 X51.46735 Y15.61913
G01 X51.46380 Y15.62403
G01 X51.44551 Y15.75901
G01 X51.44490 Y15.77455
G01 X51.44436 Y15.80209
G01 X51.44436 Y16.04953
G01 X51.45315 Y16.16056
G01 X51.46286 Y16.22175
G01 X51.50029 Y16.36630
G01 X51.54414 Y16.38550
G01 X51.55442 Y16.38967
G01 X51.59242 Y16.40623
G01 X51.65910 Y16.43739
G01 X51.76090 Y16.49576
G01 X51.82084 Y16.55570
G01 X51.84734 Y16.59711
G01 X51.90548 Y16.69538
G01 X51.93646 Y16.75306
G01 X51.94594 Y16.77247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.16123 Y16.94491 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.16123 Y16.94491
G01 X52.15208 Y16.94412
G01 X52.05145 Y16.92487
G01 X52.04274 Y16.92119
G01 X51.94594 Y16.77247
G01 X52.03413 Y16.90800
G01 X52.03410 Y17.26261
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.03410 Y17.88230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.03410 Y17.88230
G01 X52.07614 Y18.02085
G01 X52.11289 Y18.10960
G01 X52.16161 Y18.20076
G01 X52.22059 Y18.22990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.03413 Y18.23056 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.03413 Y18.23056
G01 X52.03410 Y17.88230
G01 X52.03232 Y17.87021
G01 X52.02295 Y17.77546
G01 X52.01525 Y17.61864
G01 X52.01525 Y17.52631
G01 X52.02295 Y17.36947
G01 X52.03232 Y17.27470
G01 X52.03410 Y17.26261
G01 X52.07614 Y17.12408
G01 X52.11289 Y17.03533
G01 X52.16123 Y16.94491
G01 X52.21591 Y16.91519
G01 X52.21835 Y16.91387
G01 X52.30215 Y16.86805
G01 X52.41365 Y16.79495
G01 X52.43753 Y16.77625
G01 X52.44792 Y16.76828
G01 X52.49410 Y16.73340
G01 X52.50951 Y16.72144
G01 X52.61678 Y16.63569
G01 X52.65396 Y16.60795
G01 X52.67372 Y16.59690
G01 X52.81185 Y16.52261
G01 X52.82140 Y16.51755
G01 X52.87606 Y16.49734
G01 X53.00159 Y16.45677
G01 X53.02590 Y16.45108
G01 X53.09366 Y16.43869
G01 X53.18912 Y16.42604
G01 X53.24972 Y16.42307
G01 X53.31853 Y16.42307
G01 X53.37913 Y16.42604
G01 X53.47459 Y16.43869
G01 X53.54235 Y16.45108
G01 X53.56666 Y16.45677
G01 X53.69219 Y16.49734
G01 X53.74685 Y16.51755
G01 X53.75640 Y16.52261
G01 X53.89452 Y16.59690
G01 X53.91429 Y16.60795
G01 X53.95147 Y16.63569
G01 X54.06382 Y16.72548
G01 X54.07331 Y16.73447
G01 X54.12104 Y16.78420
G01 X54.19201 Y16.86584
G01 X54.22086 Y16.90516
G01 X54.25879 Y16.96256
G01 X54.29577 Y17.02500
G01 X54.33265 Y17.10092
G01 X54.35967 Y17.16429
G01 X54.37245 Y17.19886
G01 X54.40461 Y17.31453
G01 X54.41982 Y17.38184
G01 X54.42000 Y17.38293
G01 X54.43407 Y17.53802
G01 X54.43633 Y17.57249
G01 X54.43407 Y17.60693
G01 X54.42000 Y17.76203
G01 X54.41982 Y17.76312
G01 X54.40463 Y17.83040
G01 X54.37245 Y17.94610
G01 X54.35967 Y17.98064
G01 X54.33265 Y18.04404
G01 X54.29577 Y18.11996
G01 X54.25879 Y18.18240
G01 X54.22086 Y18.23980
G01 X54.19201 Y18.27912
G01 X54.12104 Y18.36076
G01 X54.07331 Y18.41049
G01 X54.06384 Y18.41946
G01 X54.02056 Y18.45402
G01 X53.95147 Y18.50927
G01 X53.91429 Y18.53703
G01 X53.89447 Y18.54808
G01 X53.75637 Y18.62235
G01 X53.74687 Y18.62738
G01 X53.69224 Y18.64757
G01 X53.61223 Y18.67346
G01 X53.56666 Y18.68816
G01 X53.54240 Y18.69385
G01 X53.47459 Y18.70625
G01 X53.37911 Y18.71892
G01 X53.31853 Y18.72189
G01 X53.24972 Y18.72189
G01 X53.18914 Y18.71892
G01 X53.09366 Y18.70625
G01 X53.02584 Y18.69385
G01 X53.00159 Y18.68816
G01 X52.87601 Y18.64757
G01 X52.82137 Y18.62738
G01 X52.81187 Y18.62235
G01 X52.67377 Y18.54808
G01 X52.65394 Y18.53701
G01 X52.61678 Y18.50927
G01 X52.50951 Y18.42352
G01 X52.49410 Y18.41156
G01 X52.43743 Y18.36878
G01 X52.41835 Y18.35484
G01 X52.36656 Y18.31821
G01 X52.30207 Y18.27696
G01 X52.22059 Y18.22990
G01 X52.16158 Y18.20071
G01 X52.15970 Y18.19980
G01 X52.09918 Y18.21059
G01 X52.04040 Y18.22756
G01 X52.03463 Y18.22979
G01 X52.03413 Y18.23056
G01 X51.94419 Y18.37249
G01 X51.90771 Y18.44326
G01 X51.88650 Y18.48163
G01 X51.84734 Y18.54785
G01 X51.82084 Y18.58925
G01 X51.76090 Y18.64920
G01 X51.68841 Y18.69304
G01 X51.60228 Y18.71951
G01 X51.58478 Y18.72156
G01 X51.54414 Y18.72273
G01 X49.94414 Y18.72273
G01 X49.90347 Y18.72156
G01 X49.88597 Y18.71951
G01 X49.79984 Y18.69304
G01 X49.72735 Y18.64920
G01 X49.66741 Y18.58925
G01 X49.62357 Y18.51676
G01 X49.59710 Y18.43063
G01 X49.59504 Y18.41313
G01 X49.59387 Y18.37249
G01 X49.59387 Y17.91742
G01 X49.58508 Y17.80655
G01 X49.57541 Y17.74536
G01 X49.49103 Y17.49269
G01 X49.45986 Y17.43150
G01 X49.45415 Y17.42393
G01 X49.45105 Y17.41984
G01 X49.37452 Y17.37564
G01 X49.27708 Y17.34399
G01 X49.17523 Y17.33327
G01 X49.11404 Y17.33327
G01 X49.01216 Y17.34399
G01 X48.91473 Y17.37564
G01 X48.83992 Y17.41880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.45415 Y17.42393 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.45415 Y17.42393
G01 X49.45415 Y16.77247
G01 X49.46355 Y16.67686
G01 X49.49143 Y16.58494
G01 X49.53672 Y16.50023
G01 X49.59766 Y16.42599
G01 X49.67190 Y16.36505
G01 X49.75661 Y16.31976
G01 X49.84853 Y16.29188
G01 X49.90413 Y16.28641
G01 X49.90413 Y15.32591
G01 X49.90650 Y15.27791
G01 X49.91320 Y15.20961
G01 X49.93195 Y15.11540
G01 X49.95186 Y15.04974
G01 X49.98861 Y14.96099
G01 X50.02097 Y14.90049
G01 X50.07434 Y14.82063
G01 X50.11785 Y14.76760
G01 X50.15016 Y14.73196
G01 X51.59138 Y13.29074
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.46518 Y14.86851 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.46518 Y14.86851
G01 X56.64298 Y14.69074
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.38438 Y14.69071 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.38438 Y14.69071
G01 X56.64298 Y14.69074
G01 X56.87544 Y14.59444
G01 X56.91331 Y14.57981
G01 X56.98192 Y14.55528
G01 X57.04946 Y14.53473
G01 X57.11804 Y14.51756
G01 X57.17895 Y14.50542
G01 X57.24755 Y14.49523
G01 X57.30470 Y14.48959
G01 X57.37333 Y14.48621
G01 X57.40132 Y14.48553
G01 X60.49611 Y14.48553
G01 X60.52413 Y14.48484
G01 X60.59273 Y14.48146
G01 X60.64988 Y14.47583
G01 X60.71849 Y14.46564
G01 X60.77940 Y14.45350
G01 X60.84798 Y14.43633
G01 X60.91552 Y14.41578
G01 X60.98412 Y14.39124
G01 X61.02199 Y14.37661
G01 X61.25445 Y14.28032
G01 X61.95707 Y13.57771
G01 X62.00411 Y13.58236
G01 X62.10017 Y13.58236
G01 X62.25623 Y13.56699
G01 X62.35044 Y13.54824
G01 X62.50053 Y13.50273
G01 X62.58927 Y13.46595
G01 X62.72758 Y13.39203
G01 X62.80744 Y13.33867
G01 X62.92867 Y13.23918
G01 X62.99659 Y13.17126
G01 X63.09608 Y13.05002
G01 X63.14945 Y12.97016
G01 X63.22339 Y12.83184
G01 X63.26014 Y12.74309
G01 X63.30566 Y12.59303
G01 X63.32440 Y12.49882
G01 X63.33977 Y12.34273
G01 X63.33977 Y12.24670
G01 X63.32440 Y12.09061
G01 X63.30566 Y11.99640
G01 X63.26014 Y11.84632
G01 X63.22339 Y11.75759
G01 X63.14945 Y11.61927
G01 X63.09608 Y11.53941
G01 X62.99659 Y11.41817
G01 X62.92867 Y11.35025
G01 X62.80744 Y11.25076
G01 X62.72758 Y11.19740
G01 X62.58927 Y11.12346
G01 X62.50053 Y11.08670
G01 X62.35044 Y11.04119
G01 X62.26756 Y11.02473
G01 X62.09842 Y11.02470
G01 X62.00579 Y11.02473
G01 X61.83655 Y11.02473
G01 X61.75382 Y11.04119
G01 X61.60375 Y11.08670
G01 X61.51501 Y11.12346
G01 X61.37670 Y11.19740
G01 X61.29682 Y11.25076
G01 X61.17559 Y11.35025
G01 X61.10767 Y11.41817
G01 X61.00818 Y11.53941
G01 X60.95481 Y11.61927
G01 X60.88090 Y11.75759
G01 X60.84414 Y11.84632
G01 X60.79860 Y11.99640
G01 X60.77988 Y12.09061
G01 X60.76449 Y12.24670
G01 X60.76449 Y12.34273
G01 X60.76914 Y12.38977
G01 X60.14818 Y13.01073
G01 X59.75674 Y13.01073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.81321 Y11.18071 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.81321 Y11.18071
G01 X58.89604 Y11.19719
G01 X59.04613 Y11.24271
G01 X59.13487 Y11.27946
G01 X59.27318 Y11.35340
G01 X59.35304 Y11.40677
G01 X59.47427 Y11.50626
G01 X59.54219 Y11.57418
G01 X59.64168 Y11.69541
G01 X59.69505 Y11.77527
G01 X59.76899 Y11.91358
G01 X59.80574 Y12.00232
G01 X59.85126 Y12.15241
G01 X59.87000 Y12.24662
G01 X59.88537 Y12.40268
G01 X59.88537 Y12.49874
G01 X59.87282 Y12.62630
G01 X59.87000 Y12.65482
G01 X59.85126 Y12.74903
G01 X59.80574 Y12.89910
G01 X59.76899 Y12.98784
G01 X59.75674 Y13.01073
G01 X59.62588 Y13.08916
G01 X59.54933 Y13.13021
G01 X59.39248 Y13.20440
G01 X59.33670 Y13.22757
G01 X59.17988 Y13.28368
G01 X59.13858 Y13.29625
G01 X58.98176 Y13.33552
G01 X58.94999 Y13.34187
G01 X58.79314 Y13.36513
G01 X58.76683 Y13.36773
G01 X58.61001 Y13.37542
G01 X58.58545 Y13.37542
G01 X58.42860 Y13.36773
G01 X58.40229 Y13.36513
G01 X58.24547 Y13.34187
G01 X58.21369 Y13.33552
G01 X58.05687 Y13.29625
G01 X58.01557 Y13.28368
G01 X57.85875 Y13.22757
G01 X57.80297 Y13.20440
G01 X57.68951 Y13.15073
G01 X52.21934 Y13.15073
G01 X52.18493 Y13.15157
G01 X52.11630 Y13.15495
G01 X52.04622 Y13.16188
G01 X51.97761 Y13.17204
G01 X51.90339 Y13.18685
G01 X51.83479 Y13.20402
G01 X51.75325 Y13.22881
G01 X51.68462 Y13.25337
G01 X51.63941 Y13.27082
G01 X51.59138 Y13.29074
G01 X47.82047 Y13.29071
G01 X45.86911 Y15.24207
G01 X45.86911 Y16.33719
G01 X45.92474 Y16.34268
G01 X46.01666 Y16.37056
G01 X46.10137 Y16.41585
G01 X46.17562 Y16.47679
G01 X46.23655 Y16.55103
G01 X46.24209 Y16.56137
G01 X46.28184 Y16.63574
G01 X46.30973 Y16.72766
G01 X46.31913 Y16.82327
G01 X46.31910 Y17.31341
G01 X46.36114 Y17.17488
G01 X46.39789 Y17.08613
G01 X46.47183 Y16.94783
G01 X46.52520 Y16.86795
G01 X46.62469 Y16.74671
G01 X46.69261 Y16.67879
G01 X46.81382 Y16.57930
G01 X46.89370 Y16.52594
G01 X47.03200 Y16.45202
G01 X47.12075 Y16.41527
G01 X47.27081 Y16.36973
G01 X47.36505 Y16.35101
G01 X47.52111 Y16.33561
G01 X47.61717 Y16.33561
G01 X47.77323 Y16.35101
G01 X47.86746 Y16.36973
G01 X48.01752 Y16.41527
G01 X48.10627 Y16.45202
G01 X48.24457 Y16.52594
G01 X48.32446 Y16.57930
G01 X48.44567 Y16.67879
G01 X48.51359 Y16.74671
G01 X48.61308 Y16.86795
G01 X48.66644 Y16.94783
G01 X48.74038 Y17.08613
G01 X48.77714 Y17.17488
G01 X48.82268 Y17.32494
G01 X48.84091 Y17.41671
G01 X48.83992 Y17.41880
G01 X48.83992 Y17.41882
G01 X48.83970 Y17.41936
G01 X48.83228 Y17.43548
G01 X48.80340 Y17.49982
G01 X48.77025 Y17.58380
G01 X48.74432 Y17.66022
G01 X48.73116 Y17.70307
G01 X48.72110 Y17.73967
G01 X48.70619 Y17.80610
G01 X48.70482 Y17.81389
G01 X48.68961 Y17.88120
G01 X48.65745 Y17.99690
G01 X48.64467 Y18.03144
G01 X48.61765 Y18.09484
G01 X48.58077 Y18.17076
G01 X48.54379 Y18.23320
G01 X48.50586 Y18.29060
G01 X48.47701 Y18.32992
G01 X48.40604 Y18.41156
G01 X48.35831 Y18.46129
G01 X48.34882 Y18.47026
G01 X48.25039 Y18.54892
G01 X48.23647 Y18.56007
G01 X48.19929 Y18.58783
G01 X48.17947 Y18.59888
G01 X48.04137 Y18.67315
G01 X48.03185 Y18.67818
G01 X47.97724 Y18.69837
G01 X47.85166 Y18.73896
G01 X47.82740 Y18.74465
G01 X47.75959 Y18.75705
G01 X47.66411 Y18.76972
G01 X47.60353 Y18.77269
G01 X47.53472 Y18.77269
G01 X47.47414 Y18.76972
G01 X47.37866 Y18.75705
G01 X47.31084 Y18.74465
G01 X47.28659 Y18.73896
G01 X47.16101 Y18.69837
G01 X47.10637 Y18.67818
G01 X47.09687 Y18.67315
G01 X46.95877 Y18.59888
G01 X46.93894 Y18.58781
G01 X46.90178 Y18.56007
G01 X46.79451 Y18.47432
G01 X46.77910 Y18.46236
G01 X46.72243 Y18.41958
G01 X46.70335 Y18.40564
G01 X46.65156 Y18.36901
G01 X46.58707 Y18.32776
G01 X46.50559 Y18.28069
G01 X46.44661 Y18.25156
G01 X46.39789 Y18.16040
G01 X46.36114 Y18.07165
G01 X46.31910 Y17.93310
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.31913 Y18.28136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.31913 Y18.28136
G01 X46.31963 Y18.28059
G01 X46.32540 Y18.27836
G01 X46.38418 Y18.26139
G01 X46.44470 Y18.25060
G01 X46.44658 Y18.25151
G01 X46.50559 Y18.28069
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.31910 Y17.31341 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.31910 Y17.31341
G01 X46.31732 Y17.32550
G01 X46.30795 Y17.42027
G01 X46.30025 Y17.57711
G01 X46.30025 Y17.66944
G01 X46.30795 Y17.82626
G01 X46.31732 Y17.92101
G01 X46.31910 Y17.93310
G01 X46.31913 Y18.28136
G01 X46.22919 Y18.42327
G01 X46.19271 Y18.49405
G01 X46.17150 Y18.53243
G01 X46.13234 Y18.59865
G01 X46.10584 Y18.64005
G01 X46.04590 Y18.70000
G01 X45.97341 Y18.74384
G01 X45.88728 Y18.77031
G01 X45.86978 Y18.77236
G01 X45.82914 Y18.77353
G01 X44.22914 Y18.77353
G01 X44.18847 Y18.77236
G01 X44.17097 Y18.77031
G01 X44.08484 Y18.74384
G01 X44.01235 Y18.70000
G01 X43.95241 Y18.64005
G01 X43.90857 Y18.56756
G01 X43.88210 Y18.48143
G01 X43.88004 Y18.46393
G01 X43.87887 Y18.42327
G01 X43.87887 Y16.82327
G01 X43.88004 Y16.78263
G01 X43.88210 Y16.76513
G01 X43.90857 Y16.67900
G01 X43.95241 Y16.60650
G01 X44.01235 Y16.54656
G01 X44.11415 Y16.48819
G01 X44.22281 Y16.43742
G01 X44.22914 Y16.43450
G01 X44.27112 Y16.41529
G01 X44.27590 Y16.40244
G01 X44.32144 Y16.20966
G01 X44.32535 Y16.17044
G01 X44.32888 Y16.10031
G01 X44.32888 Y14.89411
G01 X44.32972 Y14.85967
G01 X44.33140 Y14.82538
G01 X44.33645 Y14.79140
G01 X44.34986 Y14.72396
G01 X44.35822 Y14.69061
G01 X44.36978 Y14.65830
G01 X44.39612 Y14.59470
G01 X44.41080 Y14.56363
G01 X44.42845 Y14.53419
G01 X44.46673 Y14.47692
G01 X44.48715 Y14.44938
G01 X44.51027 Y14.42388
G01 X44.53396 Y14.39899
G01 X46.97737 Y11.95559
G01 X46.99969 Y11.93423
G01 X47.00226 Y11.93186
G01 X47.05080 Y11.88287
G01 X47.07818 Y11.85244
G01 X47.10091 Y11.82823
G01 X47.12240 Y11.80631
G01 X47.15075 Y11.77593
G01 X47.21128 Y11.70766
G01 X47.25415 Y11.65612
G01 X47.26718 Y11.65559
G01 X47.35926 Y11.65112
G01 X47.42789 Y11.64774
G01 X47.47252 Y11.64662
G01 X49.75973 Y11.64662
G01 X49.99204 Y11.61073
G01 X50.05630 Y11.61073
G01 X50.05702 Y11.61106
G01 X50.18833 Y11.67339
G01 X50.24950 Y11.69641
G01 X50.44396 Y11.74284
G01 X50.48376 Y11.74688
G01 X50.55491 Y11.75048
G01 X50.93154 Y11.75048
G01 X51.04256 Y11.74169
G01 X51.10375 Y11.73199
G01 X51.35618 Y11.64769
G01 X51.41734 Y11.61652
G01 X51.42092 Y11.61469
G01 X51.73093 Y11.67052
G01 X54.13095 Y11.67052
G01 X54.43816 Y11.61568
G01 X54.58698 Y11.68261
G01 X54.64814 Y11.70403
G01 X54.83181 Y11.74444
G01 X54.86719 Y11.74764
G01 X54.93034 Y11.75048
G01 X57.48187 Y11.75048
G01 X57.59289 Y11.74169
G01 X57.65408 Y11.73199
G01 X57.67859 Y11.72767
G01 X57.75825 Y11.66034
G01 X57.77422 Y11.64472
G01 X57.78847 Y11.63120
G01 X57.80851 Y11.61266
G01 X57.81443 Y11.60715
G01 X57.81806 Y11.60372
G01 X57.85080 Y11.57753
G01 X57.90219 Y11.53649
G01 X57.92980 Y11.51322
G01 X57.98268 Y11.46631
G01 X57.98687 Y11.46255
G01 X58.03373 Y11.42036
G01 X58.10003 Y11.35320
G01 X58.16160 Y11.28335
G01 X58.20772 Y11.22513
G01 X58.21011 Y11.19191
G01 X58.20826 Y11.13659
G01 X58.20389 Y11.13090
G01 X58.16144 Y11.07886
G01 X58.10005 Y11.00807
G01 X58.02022 Y10.92780
G01 X57.98265 Y10.89506
G01 X57.97775 Y10.89074
G01 X57.92980 Y10.84822
G01 X57.90214 Y10.82493
G01 X57.81801 Y10.75770
G01 X57.80854 Y10.74876
G01 X57.76081 Y10.69900
G01 X57.68984 Y10.61736
G01 X57.66099 Y10.57804
G01 X57.63079 Y10.53336
G01 X57.62304 Y10.52064
G01 X57.58601 Y10.45810
G01 X57.54920 Y10.38229
G01 X57.52218 Y10.31891
G01 X57.50938 Y10.28427
G01 X57.47722 Y10.16867
G01 X57.46203 Y10.10136
G01 X57.46185 Y10.10029
G01 X57.44778 Y9.94518
G01 X57.44552 Y9.91071
G01 X57.44778 Y9.87627
G01 X57.46185 Y9.72112
G01 X57.46203 Y9.72008
G01 X57.47722 Y9.65280
G01 X57.50940 Y9.53710
G01 X57.52218 Y9.50253
G01 X57.54920 Y9.43916
G01 X57.58606 Y9.36324
G01 X57.62307 Y9.30080
G01 X57.66099 Y9.24340
G01 X57.68984 Y9.20408
G01 X57.76081 Y9.12245
G01 X57.80854 Y9.07269
G01 X57.81801 Y9.06375
G01 X57.93038 Y8.97393
G01 X57.96754 Y8.94620
G01 X57.98738 Y8.93512
G01 X58.10280 Y8.87304
G01 X58.12548 Y8.86085
G01 X58.13498 Y8.85582
G01 X58.18961 Y8.83563
G01 X58.23013 Y8.82252
G01 X58.33381 Y8.77970
G01 X58.33615 Y8.77850
G01 X58.39065 Y8.75354
G01 X58.40440 Y8.74787
G01 X58.55413 Y8.66799
G01 X58.62174 Y8.62349
G01 X58.62238 Y8.62308
G01 X58.64577 Y8.62308
G01 X58.80183 Y8.63845
G01 X58.89604 Y8.65719
G01 X59.04613 Y8.70271
G01 X59.13487 Y8.73946
G01 X59.27318 Y8.81340
G01 X59.35304 Y8.86677
G01 X59.47427 Y8.96626
G01 X59.54219 Y9.03418
G01 X59.64168 Y9.15541
G01 X59.69505 Y9.23527
G01 X59.76899 Y9.37358
G01 X59.80574 Y9.46232
G01 X59.85126 Y9.61241
G01 X59.87000 Y9.70662
G01 X59.88537 Y9.86268
G01 X59.88537 Y9.95874
G01 X59.87000 Y10.11482
G01 X59.85126 Y10.20903
G01 X59.80574 Y10.35910
G01 X59.76899 Y10.44784
G01 X59.69505 Y10.58615
G01 X59.64168 Y10.66603
G01 X59.54219 Y10.78726
G01 X59.47427 Y10.85518
G01 X59.35304 Y10.95467
G01 X59.27318 Y11.00804
G01 X59.13487 Y11.08195
G01 X59.04613 Y11.11871
G01 X58.89604 Y11.16425
G01 X58.81321 Y11.18071
G01 X58.38220 Y11.18073
G01 X58.29942 Y11.19719
G01 X58.20772 Y11.22513
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.20826 Y11.13659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.20826 Y11.13659
G01 X58.29942 Y11.16425
G01 X58.38220 Y11.18073
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.77093 Y6.42105 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.77093 Y6.42105
G01 X53.77093 Y6.45273
G01 X53.78777 Y6.44442
G01 X53.97413 Y6.31989
G01 X54.14266 Y6.17211
G01 X54.29046 Y6.00355
G01 X54.41500 Y5.81717
G01 X54.42330 Y5.80033
G01 X54.39165 Y5.80033
G01 X54.36084 Y5.85799
G01 X54.30748 Y5.93784
G01 X54.15825 Y6.11968
G01 X54.09031 Y6.18763
G01 X53.90847 Y6.33685
G01 X53.82861 Y6.39022
G01 X53.77093 Y6.42105
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.77093 Y3.46795 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.77093 Y3.46795
G01 X53.78777 Y3.47625
G01 X53.97415 Y3.60077
G01 X54.14266 Y3.74854
G01 X54.29046 Y3.91710
G01 X54.41500 Y4.10348
G01 X54.42330 Y4.12032
G01 X54.39168 Y4.12032
G01 X54.36084 Y4.06264
G01 X54.30748 Y3.98278
G01 X54.15825 Y3.80094
G01 X54.09031 Y3.73300
G01 X53.90847 Y3.58377
G01 X53.82861 Y3.53041
G01 X53.77093 Y3.49957
G01 X53.77093 Y3.46795
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.43852 Y4.12032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.43852 Y4.12032
G01 X51.44683 Y4.10348
G01 X51.57136 Y3.91712
G01 X51.71914 Y3.74859
G01 X51.88770 Y3.60079
G01 X52.07408 Y3.47625
G01 X52.09092 Y3.46795
G01 X52.09092 Y3.49960
G01 X52.03326 Y3.53041
G01 X51.95341 Y3.58377
G01 X51.77157 Y3.73300
G01 X51.70362 Y3.80094
G01 X51.55440 Y3.98278
G01 X51.50103 Y4.06264
G01 X51.47020 Y4.12032
G01 X51.43852 Y4.12032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.39974 Y3.42015 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.39974 Y3.42015
G01 X49.41656 Y3.42845
G01 X49.60294 Y3.55296
G01 X49.77144 Y3.70076
G01 X49.91927 Y3.86932
G01 X50.04381 Y4.05570
G01 X50.05211 Y4.07252
G01 X50.02047 Y4.07252
G01 X49.98963 Y4.01484
G01 X49.93626 Y3.93498
G01 X49.78704 Y3.75314
G01 X49.71912 Y3.68522
G01 X49.53728 Y3.53597
G01 X49.45740 Y3.48260
G01 X49.39974 Y3.45179
G01 X49.39974 Y3.42015
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.06733 Y5.75253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.06733 Y5.75253
G01 X47.07564 Y5.76937
G01 X47.20018 Y5.95573
G01 X47.34798 Y6.12425
G01 X47.51651 Y6.27206
G01 X47.70289 Y6.39662
G01 X47.71971 Y6.40490
G01 X47.71971 Y6.37323
G01 X47.66208 Y6.34242
G01 X47.58219 Y6.28905
G01 X47.40035 Y6.13983
G01 X47.33243 Y6.07191
G01 X47.18321 Y5.89004
G01 X47.12984 Y5.81018
G01 X47.09901 Y5.75253
G01 X47.06733 Y5.75253
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X45.14974 Y6.37325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X45.14974 Y6.37325
G01 X45.14974 Y6.40490
G01 X45.16655 Y6.39662
G01 X45.35294 Y6.27208
G01 X45.52147 Y6.12428
G01 X45.66927 Y5.95575
G01 X45.79380 Y5.76937
G01 X45.80211 Y5.75253
G01 X45.77046 Y5.75253
G01 X45.73965 Y5.81018
G01 X45.68629 Y5.89004
G01 X45.53704 Y6.07191
G01 X45.46912 Y6.13983
G01 X45.28728 Y6.28905
G01 X45.20739 Y6.34242
G01 X45.14974 Y6.37325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.81736 Y4.07252 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.81736 Y4.07252
G01 X42.82564 Y4.05570
G01 X42.95017 Y3.86929
G01 X43.09797 Y3.70079
G01 X43.26648 Y3.55299
G01 X43.45289 Y3.42845
G01 X43.46973 Y3.42015
G01 X43.46973 Y3.45179
G01 X43.41207 Y3.48260
G01 X43.33219 Y3.53597
G01 X43.15035 Y3.68522
G01 X43.08243 Y3.75314
G01 X42.93321 Y3.93498
G01 X42.87984 Y4.01484
G01 X42.84900 Y4.07252
G01 X42.81736 Y4.07252
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.81733 Y5.75253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.81733 Y5.75253
G01 X42.82564 Y5.76937
G01 X42.95017 Y5.95573
G01 X43.09797 Y6.12425
G01 X43.26650 Y6.27206
G01 X43.45289 Y6.39662
G01 X43.46973 Y6.40492
G01 X43.46973 Y6.37325
G01 X43.41207 Y6.34242
G01 X43.33219 Y6.28905
G01 X43.15035 Y6.13983
G01 X43.08243 Y6.07191
G01 X42.93321 Y5.89004
G01 X42.87984 Y5.81018
G01 X42.84900 Y5.75253
G01 X42.81733 Y5.75253
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X45.14974 Y3.42015 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X45.14974 Y3.42015
G01 X45.14974 Y3.45177
G01 X45.20739 Y3.48260
G01 X45.28728 Y3.53597
G01 X45.46912 Y3.68522
G01 X45.53704 Y3.75314
G01 X45.68629 Y3.93498
G01 X45.73965 Y4.01484
G01 X45.77046 Y4.07252
G01 X45.80211 Y4.07252
G01 X45.79380 Y4.05570
G01 X45.66924 Y3.86929
G01 X45.52147 Y3.70076
G01 X45.35294 Y3.55299
G01 X45.16655 Y3.42845
G01 X45.14974 Y3.42015
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.06733 Y4.07252 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.06733 Y4.07252
G01 X47.09901 Y4.07252
G01 X47.12984 Y4.01484
G01 X47.18321 Y3.93498
G01 X47.33243 Y3.75314
G01 X47.40035 Y3.68522
G01 X47.58219 Y3.53597
G01 X47.66208 Y3.48260
G01 X47.71971 Y3.45179
G01 X47.71971 Y3.42015
G01 X47.70289 Y3.42845
G01 X47.51648 Y3.55299
G01 X47.34798 Y3.70079
G01 X47.20018 Y3.86929
G01 X47.07564 Y4.05570
G01 X47.06733 Y4.07252
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.39974 Y6.37325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.39974 Y6.37325
G01 X49.45740 Y6.34242
G01 X49.53728 Y6.28905
G01 X49.71912 Y6.13983
G01 X49.78704 Y6.07191
G01 X49.93626 Y5.89004
G01 X49.98963 Y5.81018
G01 X50.02047 Y5.75253
G01 X50.05211 Y5.75253
G01 X50.04381 Y5.76937
G01 X49.91927 Y5.95573
G01 X49.77144 Y6.12428
G01 X49.60291 Y6.27208
G01 X49.41656 Y6.39662
G01 X49.39974 Y6.40490
G01 X49.39974 Y6.37325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.43852 Y5.80033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.43852 Y5.80033
G01 X51.47022 Y5.80033
G01 X51.50103 Y5.85799
G01 X51.55440 Y5.93784
G01 X51.70362 Y6.11968
G01 X51.77157 Y6.18763
G01 X51.95341 Y6.33685
G01 X52.03326 Y6.39022
G01 X52.09092 Y6.42103
G01 X52.09092 Y6.45273
G01 X52.07408 Y6.44442
G01 X51.88772 Y6.31986
G01 X51.71914 Y6.17206
G01 X51.57136 Y6.00353
G01 X51.44683 Y5.81717
G01 X51.43852 Y5.80033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.43816 Y11.61568 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.43816 Y11.61568
G01 X54.46295 Y11.46184
G01 X54.46834 Y11.42264
G01 X54.47870 Y11.29917
G01 X54.48116 Y11.24032
G01 X54.48116 Y8.84030
G01 X54.47999 Y8.79961
G01 X54.47796 Y8.78216
G01 X54.45150 Y8.69606
G01 X54.40763 Y8.62351
G01 X54.34774 Y8.56362
G01 X54.27519 Y8.51975
G01 X54.18909 Y8.49329
G01 X54.17161 Y8.49126
G01 X54.13095 Y8.49006
G01 X51.73093 Y8.49006
G01 X51.69021 Y8.49126
G01 X51.67276 Y8.49329
G01 X51.58665 Y8.51975
G01 X51.51411 Y8.56362
G01 X51.45422 Y8.62351
G01 X51.41035 Y8.69606
G01 X51.38389 Y8.78216
G01 X51.38185 Y8.79961
G01 X51.38066 Y8.84030
G01 X51.38066 Y11.24032
G01 X51.38315 Y11.29917
G01 X51.38856 Y11.36356
G01 X51.39062 Y11.38096
G01 X51.42092 Y11.61469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.07685 Y11.44131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.07685 Y11.44131
G01 X50.04335 Y11.59059
G01 X50.03197 Y11.59994
G01 X50.01981 Y11.60644
G01 X49.75973 Y11.64662
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.05702 Y11.61106 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.05702 Y11.61106
G01 X50.04376 Y11.58879
G01 X50.07685 Y11.44131
G01 X50.08892 Y11.37583
G01 X50.10543 Y11.26047
G01 X50.10878 Y11.23324
G01 X50.10998 Y11.19252
G01 X50.10998 Y8.79253
G01 X50.10881 Y8.75189
G01 X50.10675 Y8.73438
G01 X50.08028 Y8.64825
G01 X50.03644 Y8.57574
G01 X49.97652 Y8.51582
G01 X49.90398 Y8.47195
G01 X49.81790 Y8.44551
G01 X49.80043 Y8.44348
G01 X49.75973 Y8.44228
G01 X47.35974 Y8.44228
G01 X47.31902 Y8.44348
G01 X47.30155 Y8.44551
G01 X47.21547 Y8.47195
G01 X47.17226 Y8.49661
G01 X47.14292 Y8.51582
G01 X47.08301 Y8.57574
G01 X47.03917 Y8.64825
G01 X47.01270 Y8.73438
G01 X47.01064 Y8.75186
G01 X47.00947 Y8.79253
G01 X47.00947 Y11.19252
G01 X47.01064 Y11.23319
G01 X47.01270 Y11.25066
G01 X47.03917 Y11.33682
G01 X47.06606 Y11.38363
G01 X47.07272 Y11.39420
G01 X47.07655 Y11.40024
G01 X47.14778 Y11.51124
G01 X47.18674 Y11.56704
G01 X47.25415 Y11.65612
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.75947 Y8.79253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.75947 Y8.79253
G01 X42.75947 Y11.19252
G01 X42.76064 Y11.23319
G01 X42.76269 Y11.25066
G01 X42.78916 Y11.33682
G01 X42.83300 Y11.40931
G01 X42.89292 Y11.46925
G01 X42.96544 Y11.51309
G01 X43.05154 Y11.53956
G01 X43.06902 Y11.54159
G01 X43.10971 Y11.54276
G01 X45.50973 Y11.54276
G01 X45.55042 Y11.54159
G01 X45.56792 Y11.53956
G01 X45.65395 Y11.51312
G01 X45.66767 Y11.50573
G01 X45.72654 Y11.46923
G01 X45.78644 Y11.40933
G01 X45.83028 Y11.33682
G01 X45.85675 Y11.25066
G01 X45.85880 Y11.23319
G01 X45.85997 Y11.19252
G01 X45.85997 Y8.79253
G01 X45.85880 Y8.75189
G01 X45.85675 Y8.73438
G01 X45.83028 Y8.64825
G01 X45.78644 Y8.57574
G01 X45.72652 Y8.51582
G01 X45.65398 Y8.47198
G01 X45.56790 Y8.44551
G01 X45.55042 Y8.44348
G01 X45.50973 Y8.44228
G01 X43.10971 Y8.44228
G01 X43.06902 Y8.44348
G01 X43.05154 Y8.44551
G01 X42.96546 Y8.47195
G01 X42.92226 Y8.49661
G01 X42.89292 Y8.51582
G01 X42.83300 Y8.57574
G01 X42.78916 Y8.64825
G01 X42.76269 Y8.73438
G01 X42.76064 Y8.75186
G01 X42.75947 Y8.79253
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.69666 Y16.46030 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.69666 Y16.46030
G01 X39.69666 Y18.86032
G01 X39.69785 Y18.90104
G01 X39.69989 Y18.91849
G01 X39.72635 Y19.00460
G01 X39.77022 Y19.07714
G01 X39.83011 Y19.13703
G01 X39.90265 Y19.18090
G01 X39.98876 Y19.20736
G01 X40.00621 Y19.20940
G01 X40.04693 Y19.21056
G01 X42.44695 Y19.21056
G01 X42.48764 Y19.20940
G01 X42.50509 Y19.20736
G01 X42.59119 Y19.18090
G01 X42.66374 Y19.13703
G01 X42.72363 Y19.07716
G01 X42.72404 Y19.07658
G01 X42.76747 Y19.00462
G01 X42.79396 Y18.91849
G01 X42.79599 Y18.90104
G01 X42.79716 Y18.86032
G01 X42.79716 Y16.46030
G01 X42.79599 Y16.41961
G01 X42.79396 Y16.40216
G01 X42.76750 Y16.31606
G01 X42.72363 Y16.24351
G01 X42.66374 Y16.18362
G01 X42.59119 Y16.13975
G01 X42.50509 Y16.11329
G01 X42.48761 Y16.11126
G01 X42.44695 Y16.11006
G01 X40.04693 Y16.11006
G01 X40.00621 Y16.11126
G01 X39.98876 Y16.11329
G01 X39.90265 Y16.13975
G01 X39.83011 Y16.18362
G01 X39.77022 Y16.24351
G01 X39.72635 Y16.31606
G01 X39.69989 Y16.40216
G01 X39.69785 Y16.41961
G01 X39.69666 Y16.46030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.77895 Y18.79055 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.77895 Y18.79055
G01 X32.80084 Y18.76865
G01 X32.80960 Y18.88562
G01 X32.80084 Y19.00261
G01 X32.77895 Y18.98072
G01 X32.78357 Y18.93365
G01 X32.78357 Y18.83759
G01 X32.77895 Y18.79055
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.67544 Y20.04457 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.67544 Y20.04457
G01 X30.68929 Y20.03370
G01 X30.76714 Y20.03619
G01 X30.82777 Y20.04442
G01 X30.90283 Y20.06070
G01 X30.97443 Y20.08849
G01 X31.01598 Y20.10848
G01 X31.20361 Y20.16637
G01 X31.39774 Y20.19563
G01 X31.59411 Y20.19563
G01 X31.61486 Y20.19250
G01 X31.59099 Y20.16863
G01 X31.54397 Y20.17325
G01 X31.44791 Y20.17325
G01 X31.29183 Y20.15788
G01 X31.19762 Y20.13914
G01 X31.04755 Y20.09362
G01 X30.97836 Y20.06497
G01 X30.95881 Y20.05687
G01 X30.82050 Y19.98293
G01 X30.74062 Y19.92956
G01 X30.71057 Y19.90490
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.71487 Y17.86279 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.71487 Y17.86279
G01 X30.71487 Y17.53907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.03483 Y17.91191 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.03483 Y17.91191
G01 X29.03488 Y15.26556
G01 X29.03725 Y15.21756
G01 X29.04395 Y15.14926
G01 X29.06270 Y15.05505
G01 X29.08261 Y14.98939
G01 X29.11936 Y14.90064
G01 X29.15172 Y14.84014
G01 X29.20509 Y14.76028
G01 X29.24860 Y14.70725
G01 X29.28091 Y14.67161
G01 X30.65594 Y13.29658
G01 X30.65594 Y9.70004
G01 X30.61939 Y9.67007
G01 X30.55147 Y9.60215
G01 X30.45198 Y9.48092
G01 X30.39861 Y9.40106
G01 X30.32470 Y9.26276
G01 X30.28794 Y9.17401
G01 X30.24240 Y9.02392
G01 X30.22368 Y8.92971
G01 X30.20829 Y8.77365
G01 X30.20829 Y8.67759
G01 X30.22368 Y8.52151
G01 X30.24240 Y8.42730
G01 X30.28794 Y8.27724
G01 X30.32470 Y8.18849
G01 X30.39861 Y8.05018
G01 X30.44039 Y7.98768
G01 X30.45198 Y7.97030
G01 X30.55147 Y7.84907
G01 X30.61939 Y7.78115
G01 X30.67552 Y7.73507
G01 X30.74867 Y7.73510
G01 X30.78400 Y7.73454
G01 X30.84827 Y7.73248
G01 X30.87590 Y7.73202
G01 X31.05373 Y7.73202
G01 X31.11347 Y7.73487
G01 X31.15594 Y7.73906
G01 X31.20544 Y7.74155
G01 X31.27935 Y7.74155
G01 X31.32040 Y7.74353
G01 X31.47953 Y7.75923
G01 X31.48662 Y7.75999
G01 X31.51194 Y7.76301
G01 X31.51878 Y7.76377
G01 X31.66800 Y7.77846
G01 X31.69985 Y7.78318
G01 X31.79086 Y7.80129
G01 X31.82548 Y7.80642
G01 X31.85578 Y7.80939
G01 X31.89376 Y7.81506
G01 X32.05449 Y7.84704
G01 X32.10508 Y7.85976
G01 X32.10656 Y7.86019
G01 X32.16396 Y7.87449
G01 X32.27735 Y7.89705
G01 X32.35733 Y7.91722
G01 X32.45324 Y7.94630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.67552 Y7.73507 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.67552 Y7.73507
G01 X30.50714 Y7.59685
G01 X30.43922 Y7.52893
G01 X30.26511 Y7.31676
G01 X30.21174 Y7.23690
G01 X30.08235 Y6.99487
G01 X30.05795 Y6.93586
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.17862 Y7.89811 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.17862 Y7.89811
G01 X29.23788 Y7.97030
G01 X29.29125 Y8.05018
G01 X29.36519 Y8.18849
G01 X29.40194 Y8.27724
G01 X29.44746 Y8.42730
G01 X29.46620 Y8.52151
G01 X29.48157 Y8.67759
G01 X29.48157 Y8.77365
G01 X29.46620 Y8.92971
G01 X29.44746 Y9.02392
G01 X29.40194 Y9.17401
G01 X29.36519 Y9.26276
G01 X29.29125 Y9.40106
G01 X29.23788 Y9.48092
G01 X29.13839 Y9.60215
G01 X29.07047 Y9.67007
G01 X29.03392 Y9.70007
G01 X29.03392 Y13.13651
G01 X29.03156 Y13.18454
G01 X29.02485 Y13.25284
G01 X29.00611 Y13.34705
G01 X28.98619 Y13.41271
G01 X28.94944 Y13.50146
G01 X28.91708 Y13.56196
G01 X28.86371 Y13.64182
G01 X28.82020 Y13.69485
G01 X28.78789 Y13.73049
G01 X27.63392 Y14.88446
G01 X27.63392 Y17.72659
G01 X27.65681 Y17.71438
G01 X27.74555 Y17.67760
G01 X27.89562 Y17.63208
G01 X27.98983 Y17.61334
G01 X28.14591 Y17.59797
G01 X28.24197 Y17.59797
G01 X28.39803 Y17.61334
G01 X28.49224 Y17.63208
G01 X28.64233 Y17.67760
G01 X28.73107 Y17.71438
G01 X28.86938 Y17.78829
G01 X28.94924 Y17.84166
G01 X29.03483 Y17.91191
G01 X29.05665 Y17.95801
G01 X29.09323 Y18.04610
G01 X29.14936 Y18.20292
G01 X29.17110 Y18.27445
G01 X29.21037 Y18.43129
G01 X29.22241 Y18.49167
G01 X29.24570 Y18.64849
G01 X29.25106 Y18.70272
G01 X29.25876 Y18.85956
G01 X29.25876 Y18.91171
G01 X29.25106 Y19.06853
G01 X29.24570 Y19.12276
G01 X29.22244 Y19.27960
G01 X29.21037 Y19.34000
G01 X29.17110 Y19.49682
G01 X29.15861 Y19.54092
G01 X29.14083 Y19.56129
G01 X29.03537 Y19.67762
G01 X28.98591 Y19.72707
G01 X28.86958 Y19.83253
G01 X28.81350 Y19.87851
G01 X28.68617 Y19.97294
G01 X28.61929 Y20.01760
G01 X28.52041 Y20.07686
G01 X28.46948 Y20.06411
G01 X28.38629 Y20.03898
G01 X28.22297 Y19.98054
G01 X28.16717 Y19.95748
G01 X28.01657 Y19.88628
G01 X27.97847 Y19.86593
G01 X27.83981 Y19.78280
G01 X27.81289 Y19.76484
G01 X27.68556 Y19.67041
G01 X27.66509 Y19.65364
G01 X27.54876 Y19.54818
G01 X27.53138 Y19.53081
G01 X27.42592 Y19.41447
G01 X27.40916 Y19.39403
G01 X27.31472 Y19.26667
G01 X27.30552 Y19.25362
G01 X27.30278 Y19.23789
G01 X27.27952 Y19.08105
G01 X27.27692 Y19.05473
G01 X27.26923 Y18.89792
G01 X27.26923 Y18.87335
G01 X27.27692 Y18.71651
G01 X27.27952 Y18.69019
G01 X27.30278 Y18.53337
G01 X27.30913 Y18.50160
G01 X27.34840 Y18.34475
G01 X27.36097 Y18.30345
G01 X27.41708 Y18.14663
G01 X27.44025 Y18.09088
G01 X27.51444 Y17.93404
G01 X27.55546 Y17.85753
G01 X27.63392 Y17.72659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.05488 Y17.73096 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.05488 Y17.73096
G01 X25.95394 Y17.95956
G01 X25.95391 Y18.15728
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.82570 Y18.01781 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.82570 Y18.01781
G01 X25.84551 Y18.02263
G01 X25.84805 Y18.02327
G01 X25.93588 Y18.13030
G01 X25.95391 Y18.15728
G01 X25.97271 Y18.21910
G01 X26.01198 Y18.37592
G01 X26.02851 Y18.45885
G01 X26.05178 Y18.61567
G01 X26.05932 Y18.69187
G01 X26.06702 Y18.84872
G01 X26.06702 Y18.92258
G01 X26.05932 Y19.07937
G01 X26.05178 Y19.15555
G01 X26.02851 Y19.31239
G01 X26.01198 Y19.39537
G01 X25.99440 Y19.46550
G01 X25.98424 Y19.51082
G01 X25.97571 Y19.55379
G01 X25.96984 Y19.58120
G01 X25.96674 Y19.59471
G01 X25.93588 Y19.64092
G01 X25.83639 Y19.76215
G01 X25.76847 Y19.83007
G01 X25.64724 Y19.92956
G01 X25.58153 Y19.97348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.96984 Y19.58120 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.96984 Y19.58120
G01 X25.96677 Y19.59471
G01 X25.96674 Y19.59471
G01 X25.96613 Y19.59748
G01 X25.98175 Y19.67604
G01 X26.00167 Y19.74170
G01 X26.03842 Y19.83045
G01 X26.07078 Y19.89095
G01 X26.12415 Y19.97081
G01 X26.16766 Y20.02385
G01 X26.19996 Y20.05948
G01 X27.19895 Y21.05846
G01 X27.19890 Y22.13476
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.52041 Y20.07686 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.52041 Y20.07686
G01 X28.52041 Y20.22461
G01 X28.52043 Y20.22903
G01 X28.52061 Y20.26708
G01 X28.52061 Y20.35587
G01 X28.52064 Y20.35956
G01 X28.52091 Y20.41117
G01 X28.52094 Y20.41402
G01 X28.52094 Y20.49179
G01 X28.52117 Y20.52598
G01 X28.52119 Y20.52839
G01 X28.52119 Y20.60010
G01 X28.52140 Y20.62628
G01 X28.52142 Y20.62852
G01 X28.52142 Y20.69745
G01 X28.52152 Y20.70830
G01 X28.52152 Y32.59550
G01 X28.52185 Y32.60856
G01 X28.52521 Y32.67719
G01 X28.52787 Y32.70414
G01 X28.53806 Y32.77277
G01 X28.54400 Y32.80256
G01 X28.56117 Y32.87117
G01 X28.57177 Y32.90599
G01 X28.59633 Y32.97459
G01 X28.60433 Y32.99532
G01 X28.87890 Y33.65824
G01 X28.87893 Y36.97197
G01 X29.90826 Y38.00133
G01 X30.12147 Y38.00133
G01 X30.15147 Y37.96478
G01 X30.21939 Y37.89686
G01 X30.34062 Y37.79737
G01 X30.42050 Y37.74400
G01 X30.55881 Y37.67006
G01 X30.64756 Y37.63331
G01 X30.79762 Y37.58779
G01 X30.88040 Y37.57133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X27.63252 Y38.10143 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X27.63252 Y38.10143
G01 X27.87753 Y38.34644
G01 X28.96635 Y39.43529
G01 X29.00197 Y39.46757
G01 X29.05503 Y39.51111
G01 X29.13488 Y39.56447
G01 X29.19539 Y39.59681
G01 X29.28413 Y39.63359
G01 X29.34979 Y39.65350
G01 X29.44400 Y39.67224
G01 X29.51230 Y39.67895
G01 X29.56033 Y39.68131
G01 X30.12150 Y39.68131
G01 X30.15147 Y39.71786
G01 X30.21939 Y39.78578
G01 X30.34062 Y39.88527
G01 X30.42050 Y39.93864
G01 X30.55881 Y40.01255
G01 X30.64756 Y40.04931
G01 X30.79762 Y40.09485
G01 X30.88040 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.11141 Y37.57133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.11141 Y37.57133
G01 X32.19424 Y37.55485
G01 X32.34433 Y37.50931
G01 X32.43307 Y37.47255
G01 X32.57138 Y37.39864
G01 X32.65123 Y37.34527
G01 X32.77247 Y37.24578
G01 X32.84039 Y37.17786
G01 X32.87039 Y37.14131
G01 X33.17999 Y37.14131
G01 X33.90455 Y37.86587
G01 X33.90455 Y39.96150
G01 X33.90691 Y40.00953
G01 X33.91361 Y40.07783
G01 X33.93236 Y40.17204
G01 X33.95227 Y40.23770
G01 X33.98903 Y40.32645
G01 X34.02139 Y40.38695
G01 X34.07475 Y40.46681
G01 X34.11826 Y40.51984
G01 X34.14526 Y40.54971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.12834 Y40.16551 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.12834 Y40.16551
G01 X36.13843 Y40.16747
G01 X36.76796 Y40.79701
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.08389 Y40.46607 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.08389 Y40.46607
G01 X36.96977 Y40.47511
G01 X36.96974 Y40.47509
G01 X36.91650 Y40.44664
G01 X36.83662 Y40.39327
G01 X36.71539 Y40.29378
G01 X36.64747 Y40.22586
G01 X36.54798 Y40.10463
G01 X36.49461 Y40.02475
G01 X36.46230 Y39.96429
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.28649 Y35.07617 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.28649 Y35.07617
G01 X32.28499 Y35.06192
G01 X32.28499 Y35.00073
G01 X32.28646 Y34.98650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.11141 Y35.03131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.11141 Y35.03131
G01 X32.19424 Y35.01485
G01 X32.28611 Y34.98699
G01 X32.28646 Y34.98650
G01 X32.28649 Y34.98650
G01 X32.33221 Y34.92958
G01 X32.39381 Y34.85907
G01 X32.47209 Y34.78066
G01 X32.51141 Y34.74640
G01 X32.51936 Y34.73936
G01 X32.56416 Y34.69918
G01 X32.60386 Y34.66613
G01 X32.64295 Y34.63593
G01 X32.68436 Y34.59842
G01 X32.73302 Y34.54975
G01 X32.77054 Y34.50832
G01 X32.83234 Y34.42836
G01 X32.87173 Y34.37180
G01 X32.87740 Y34.36278
G01 X32.94504 Y34.23316
G01 X32.96025 Y34.20218
G01 X32.97140 Y34.16956
G01 X33.01522 Y34.03004
G01 X33.01760 Y34.01970
G01 X33.02972 Y33.95178
G01 X33.04382 Y33.84208
G01 X33.04895 Y33.80843
G01 X33.05111 Y33.79628
G01 X33.05220 Y33.78986
G01 X33.06307 Y33.72516
G01 X33.08380 Y33.63461
G01 X33.10211 Y33.57134
G01 X33.10440 Y33.56352
G01 X33.13295 Y33.46799
G01 X33.14305 Y33.44185
G01 X33.14303 Y33.44183
G01 X33.10394 Y33.31292
G01 X33.06718 Y33.22418
G01 X32.99325 Y33.08587
G01 X32.93988 Y33.00601
G01 X32.84039 Y32.88478
G01 X32.80033 Y32.84470
G01 X32.77247 Y32.81686
G01 X32.65123 Y32.71737
G01 X32.57138 Y32.66400
G01 X32.43307 Y32.59006
G01 X32.34433 Y32.55331
G01 X32.19424 Y32.50779
G01 X32.11141 Y32.49131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.00689 Y31.87122 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.00689 Y31.87122
G01 X33.00699 Y31.87315
G01 X33.03411 Y31.90668
G01 X33.07737 Y31.94993
G01 X33.15697 Y32.01437
G01 X33.24824 Y32.06088
G01 X33.34717 Y32.08740
G01 X33.40760 Y32.09697
G01 X33.41064 Y32.09718
G01 X33.49045 Y32.05329
G01 X33.56815 Y32.00597
G01 X33.63503 Y31.96063
G01 X33.67562 Y31.92999
G01 X33.69970 Y31.91105
G01 X33.74681 Y31.87234
G01 X33.75408 Y31.86647
G01 X33.87658 Y31.76853
G01 X33.91374 Y31.74079
G01 X33.93358 Y31.72972
G01 X34.04900 Y31.66764
G01 X34.07168 Y31.65545
G01 X34.08120 Y31.65042
G01 X34.13581 Y31.63022
G01 X34.26139 Y31.58963
G01 X34.28565 Y31.58394
G01 X34.35347 Y31.57155
G01 X34.44892 Y31.55890
G01 X34.50952 Y31.55593
G01 X34.57833 Y31.55593
G01 X34.63894 Y31.55890
G01 X34.73436 Y31.57155
G01 X34.80216 Y31.58394
G01 X34.82646 Y31.58963
G01 X34.95204 Y31.63022
G01 X35.00665 Y31.65042
G01 X35.01618 Y31.65545
G01 X35.15428 Y31.72972
G01 X35.17409 Y31.74076
G01 X35.21127 Y31.76855
G01 X35.32362 Y31.85834
G01 X35.33309 Y31.86731
G01 X35.38085 Y31.91704
G01 X35.45184 Y31.99870
G01 X35.48067 Y32.03800
G01 X35.51861 Y32.09545
G01 X35.55557 Y32.15783
G01 X35.59245 Y32.23380
G01 X35.61945 Y32.29708
G01 X35.63223 Y32.33170
G01 X35.66441 Y32.44734
G01 X35.67963 Y32.51470
G01 X35.67980 Y32.51579
G01 X35.69387 Y32.67086
G01 X35.69614 Y32.70533
G01 X35.69387 Y32.73977
G01 X35.67980 Y32.89486
G01 X35.67963 Y32.89596
G01 X35.66441 Y32.96332
G01 X35.63223 Y33.07896
G01 X35.61945 Y33.11356
G01 X35.59248 Y33.17683
G01 X35.55557 Y33.25280
G01 X35.51864 Y33.31518
G01 X35.48064 Y33.37269
G01 X35.45181 Y33.41196
G01 X35.38082 Y33.49362
G01 X35.33312 Y33.54333
G01 X35.32359 Y33.55232
G01 X35.21127 Y33.64211
G01 X35.17409 Y33.66984
G01 X35.15433 Y33.68089
G01 X35.01620 Y33.75519
G01 X35.00663 Y33.76024
G01 X34.95197 Y33.78046
G01 X34.82644 Y33.82102
G01 X34.80211 Y33.82671
G01 X34.73436 Y33.83911
G01 X34.63894 Y33.85176
G01 X34.57833 Y33.85473
G01 X34.50952 Y33.85473
G01 X34.44892 Y33.85176
G01 X34.35347 Y33.83911
G01 X34.28570 Y33.82671
G01 X34.26139 Y33.82102
G01 X34.13586 Y33.78046
G01 X34.08120 Y33.76024
G01 X34.07165 Y33.75519
G01 X33.93353 Y33.68089
G01 X33.91377 Y33.66987
G01 X33.87658 Y33.64211
G01 X33.76906 Y33.55615
G01 X33.75390 Y33.54437
G01 X33.69731 Y33.50159
G01 X33.67780 Y33.48734
G01 X33.62598 Y33.45074
G01 X33.56200 Y33.40980
G01 X33.48049 Y33.36266
G01 X33.41936 Y33.33246
G01 X33.35878 Y33.34323
G01 X33.29998 Y33.36019
G01 X33.20501 Y33.39878
G01 X33.14364 Y33.44030
G01 X33.14303 Y33.44183
G01 X33.13295 Y33.46799
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.42131 Y33.33342 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.42131 Y33.33342
G01 X33.37270 Y33.24244
G01 X33.33594 Y33.15369
G01 X33.29040 Y33.00363
G01 X33.27168 Y32.90942
G01 X33.25629 Y32.75334
G01 X33.25629 Y32.65727
G01 X33.27168 Y32.50122
G01 X33.28578 Y32.43022
G01 X33.29040 Y32.40701
G01 X33.33594 Y32.25692
G01 X33.37270 Y32.16817
G01 X33.41064 Y32.09718
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.43972 Y36.04733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.43972 Y36.04733
G01 X36.44198 Y36.01287
G01 X36.45605 Y35.85777
G01 X36.45623 Y35.85668
G01 X36.47142 Y35.78940
G01 X36.47388 Y35.78056
G01 X36.50360 Y35.67370
G01 X36.51638 Y35.63913
G01 X36.54340 Y35.57576
G01 X36.58026 Y35.49984
G01 X36.61727 Y35.43740
G01 X36.65519 Y35.38000
G01 X36.68404 Y35.34068
G01 X36.75501 Y35.25905
G01 X36.80274 Y35.20929
G01 X36.81224 Y35.20035
G01 X36.91389 Y35.11909
G01 X36.92458 Y35.11053
G01 X36.96177 Y35.08280
G01 X36.98158 Y35.07172
G01 X37.02471 Y35.04853
G01 X37.11968 Y34.99745
G01 X37.12915 Y34.99245
G01 X37.18381 Y34.97223
G01 X37.30939 Y34.93164
G01 X37.33365 Y34.92595
G01 X37.40147 Y34.91355
G01 X37.49694 Y34.90088
G01 X37.55752 Y34.89791
G01 X37.62633 Y34.89791
G01 X37.68691 Y34.90088
G01 X37.78236 Y34.91355
G01 X37.85016 Y34.92595
G01 X37.87446 Y34.93164
G01 X38.00004 Y34.97223
G01 X38.05465 Y34.99242
G01 X38.06418 Y34.99745
G01 X38.20228 Y35.07172
G01 X38.22209 Y35.08280
G01 X38.25927 Y35.11053
G01 X38.37162 Y35.20035
G01 X38.38112 Y35.20931
G01 X38.42885 Y35.25905
G01 X38.49981 Y35.34068
G01 X38.52867 Y35.38000
G01 X38.56661 Y35.43746
G01 X38.60357 Y35.49984
G01 X38.64045 Y35.57581
G01 X38.66745 Y35.63908
G01 X38.68097 Y35.67566
G01 X38.71508 Y35.76606
G01 X38.72409 Y35.78582
G01 X38.73977 Y35.82280
G01 X38.75214 Y35.85427
G01 X38.82920 Y36.00426
G01 X38.85584 Y36.04604
G01 X38.82857 Y36.09031
G01 X38.76519 Y36.21302
G01 X38.75369 Y36.24053
G01 X38.73989 Y36.27157
G01 X38.72257 Y36.30842
G01 X38.68724 Y36.39882
G01 X38.68333 Y36.41132
G01 X38.68099 Y36.41894
G01 X38.66745 Y36.45556
G01 X38.64045 Y36.51883
G01 X38.60357 Y36.59481
G01 X38.56661 Y36.65719
G01 X38.52867 Y36.71464
G01 X38.49981 Y36.75396
G01 X38.42885 Y36.83560
G01 X38.38112 Y36.88533
G01 X38.37162 Y36.89430
G01 X38.29471 Y36.95577
G01 X38.25927 Y36.98411
G01 X38.22206 Y37.01187
G01 X38.20233 Y37.02290
G01 X38.06420 Y37.09719
G01 X38.05463 Y37.10225
G01 X37.99997 Y37.12247
G01 X37.87444 Y37.16303
G01 X37.85011 Y37.16872
G01 X37.78236 Y37.18111
G01 X37.68694 Y37.19376
G01 X37.62633 Y37.19674
G01 X37.55752 Y37.19674
G01 X37.49692 Y37.19376
G01 X37.40147 Y37.18111
G01 X37.33370 Y37.16872
G01 X37.30939 Y37.16303
G01 X37.18386 Y37.12247
G01 X37.12920 Y37.10225
G01 X37.11965 Y37.09719
G01 X36.98153 Y37.02290
G01 X36.96177 Y37.01185
G01 X36.92458 Y36.98411
G01 X36.81224 Y36.89430
G01 X36.80274 Y36.88536
G01 X36.76817 Y36.85030
G01 X36.75501 Y36.83560
G01 X36.68404 Y36.75399
G01 X36.65519 Y36.71464
G01 X36.61727 Y36.65724
G01 X36.58023 Y36.59473
G01 X36.54340 Y36.51889
G01 X36.51638 Y36.45551
G01 X36.50360 Y36.42094
G01 X36.47142 Y36.30527
G01 X36.45623 Y36.23796
G01 X36.45605 Y36.23689
G01 X36.44198 Y36.08178
G01 X36.43972 Y36.04733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.84784 Y39.06826 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.84784 Y39.06826
G01 X38.88264 Y39.07367
G01 X38.94375 Y39.07672
G01 X39.04612 Y39.07108
G01 X39.14507 Y39.04428
G01 X39.14629 Y39.04365
G01 X39.33372 Y39.23107
G01 X39.35694 Y39.25426
G01 X39.35229 Y39.30128
G01 X39.35229 Y39.39734
G01 X39.35694 Y39.44436
G01 X39.14566 Y39.65563
G01 X39.13397 Y39.65045
G01 X39.03377 Y39.62914
G01 X38.97291 Y39.62274
G01 X38.87050 Y39.62274
G01 X38.84932 Y39.62721
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.52099 Y40.65619 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.52099 Y40.65619
G01 X40.54174 Y40.65931
G01 X40.73811 Y40.65931
G01 X40.75886 Y40.65619
G01 X40.73499 Y40.63231
G01 X40.68797 Y40.63696
G01 X40.59191 Y40.63696
G01 X40.54487 Y40.63231
G01 X40.52099 Y40.65619
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.45307 Y37.97453 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.45307 Y37.97453
G01 X40.54484 Y38.06630
G01 X40.59191 Y38.06168
G01 X40.68797 Y38.06168
G01 X40.73501 Y38.06630
G01 X40.82676 Y37.97456
G01 X40.77949 Y37.93331
G01 X40.71802 Y37.85155
G01 X40.67489 Y37.75879
G01 X40.65503 Y37.70093
G01 X40.63989 Y37.63506
G01 X40.62506 Y37.70009
G01 X40.60527 Y37.75800
G01 X40.56222 Y37.85086
G01 X40.50082 Y37.93278
G01 X40.45307 Y37.97453
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.68673 Y37.32259 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.68673 Y37.32259
G01 X40.67088 Y37.33496
G01 X40.60893 Y37.33496
G01 X40.61045 Y37.33616
G01 X40.61154 Y37.33875
G01 X40.62958 Y37.39719
G01 X40.63994 Y37.44977
G01 X40.65000 Y37.39821
G01 X40.66793 Y37.33971
G01 X40.66951 Y37.33603
G01 X40.67085 Y37.33496
G01 X40.68673 Y37.32259
G01 X40.83481 Y37.22630
G01 X40.90453 Y37.18988
G01 X40.91256 Y37.18574
G01 X40.96798 Y37.15762
G01 X41.04809 Y37.12287
G01 X41.07131 Y37.11446
G01 X41.10263 Y37.10225
G01 X41.11220 Y37.09719
G01 X41.25033 Y37.02290
G01 X41.27006 Y37.01187
G01 X41.30727 Y36.98411
G01 X41.34271 Y36.95577
G01 X41.41962 Y36.89430
G01 X41.42912 Y36.88533
G01 X41.47685 Y36.83560
G01 X41.54781 Y36.75396
G01 X41.57667 Y36.71464
G01 X41.61461 Y36.65719
G01 X41.65157 Y36.59481
G01 X41.68845 Y36.51883
G01 X41.71545 Y36.45556
G01 X41.72823 Y36.42094
G01 X41.76041 Y36.30532
G01 X41.77563 Y36.23796
G01 X41.77580 Y36.23687
G01 X41.78987 Y36.08178
G01 X41.79214 Y36.04733
G01 X41.78987 Y36.01287
G01 X41.77580 Y35.85777
G01 X41.77563 Y35.85668
G01 X41.76041 Y35.78935
G01 X41.72823 Y35.67370
G01 X41.71545 Y35.63908
G01 X41.68845 Y35.57581
G01 X41.65157 Y35.49984
G01 X41.61461 Y35.43746
G01 X41.57667 Y35.38000
G01 X41.54781 Y35.34068
G01 X41.47685 Y35.25905
G01 X41.42912 Y35.20931
G01 X41.41962 Y35.20035
G01 X41.30727 Y35.11053
G01 X41.27009 Y35.08280
G01 X41.25028 Y35.07172
G01 X41.11218 Y34.99745
G01 X41.10265 Y34.99242
G01 X41.04804 Y34.97223
G01 X40.92246 Y34.93164
G01 X40.89816 Y34.92595
G01 X40.83036 Y34.91355
G01 X40.73491 Y34.90088
G01 X40.67433 Y34.89791
G01 X40.60552 Y34.89791
G01 X40.54494 Y34.90088
G01 X40.44947 Y34.91355
G01 X40.38165 Y34.92595
G01 X40.35739 Y34.93164
G01 X40.23181 Y34.97223
G01 X40.17715 Y34.99245
G01 X40.16768 Y34.99745
G01 X40.07271 Y35.04853
G01 X40.02958 Y35.07172
G01 X40.00977 Y35.08280
G01 X39.97258 Y35.11053
G01 X39.96189 Y35.11909
G01 X39.86024 Y35.20035
G01 X39.85074 Y35.20929
G01 X39.80301 Y35.25905
G01 X39.73204 Y35.34068
G01 X39.70319 Y35.38000
G01 X39.66527 Y35.43740
G01 X39.62826 Y35.49984
G01 X39.59140 Y35.57576
G01 X39.56438 Y35.63913
G01 X39.55094 Y35.67550
G01 X39.54853 Y35.68335
G01 X39.54459 Y35.69585
G01 X39.50926 Y35.78632
G01 X39.49186 Y35.82331
G01 X39.47817 Y35.85412
G01 X39.46656 Y35.88185
G01 X39.40329 Y36.00433
G01 X39.37599 Y36.04860
G01 X39.40263 Y36.09039
G01 X39.47972 Y36.24037
G01 X39.49201 Y36.27174
G01 X39.50776 Y36.30883
G01 X39.51673 Y36.32849
G01 X39.55089 Y36.41899
G01 X39.56438 Y36.45551
G01 X39.59140 Y36.51889
G01 X39.62823 Y36.59473
G01 X39.66527 Y36.65724
G01 X39.70319 Y36.71464
G01 X39.73204 Y36.75399
G01 X39.80301 Y36.83560
G01 X39.81617 Y36.85030
G01 X39.85074 Y36.88536
G01 X39.86024 Y36.89430
G01 X39.97258 Y36.98411
G01 X40.00977 Y37.01185
G01 X40.02953 Y37.02290
G01 X40.16765 Y37.09719
G01 X40.17720 Y37.10225
G01 X40.20852 Y37.11446
G01 X40.23174 Y37.12287
G01 X40.31157 Y37.15747
G01 X40.36684 Y37.18551
G01 X40.37530 Y37.18985
G01 X40.44502 Y37.22630
G01 X40.59313 Y37.32262
G01 X40.60893 Y37.33496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.23586 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.23586 Y48.08894
G01 X51.20560 Y48.18866
G01 X51.18914 Y48.27144
G01 X51.18914 Y48.70245
G01 X51.17266 Y48.78528
G01 X51.12714 Y48.93535
G01 X51.09039 Y49.02409
G01 X51.01645 Y49.16240
G01 X50.96308 Y49.24228
G01 X50.86359 Y49.36351
G01 X50.79567 Y49.43143
G01 X50.67444 Y49.53092
G01 X50.59458 Y49.58429
G01 X50.45628 Y49.65820
G01 X50.36753 Y49.69496
G01 X50.21744 Y49.74050
G01 X50.12323 Y49.75922
G01 X49.99367 Y49.77200
G01 X49.96718 Y49.77461
G01 X49.87111 Y49.77461
G01 X49.71503 Y49.75922
G01 X49.62082 Y49.74050
G01 X49.50929 Y49.70667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.14241 Y48.08899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.14241 Y48.08899
G01 X51.17266 Y48.18866
G01 X51.18914 Y48.27144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.18914 Y48.70245 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.18914 Y48.70245
G01 X51.20560 Y48.78528
G01 X51.25112 Y48.93535
G01 X51.28790 Y49.02409
G01 X51.36181 Y49.16240
G01 X51.41518 Y49.24228
G01 X51.51467 Y49.36351
G01 X51.58259 Y49.43143
G01 X51.70383 Y49.53092
G01 X51.78371 Y49.58429
G01 X51.92201 Y49.65820
G01 X52.01076 Y49.69496
G01 X52.16082 Y49.74050
G01 X52.25503 Y49.75922
G01 X52.41111 Y49.77461
G01 X52.50718 Y49.77461
G01 X52.66323 Y49.75922
G01 X52.75744 Y49.74050
G01 X52.82437 Y49.72018
G01 X52.90753 Y49.69496
G01 X52.99628 Y49.65820
G01 X53.13458 Y49.58429
G01 X53.21444 Y49.53092
G01 X53.33567 Y49.43143
G01 X53.40359 Y49.36351
G01 X53.50308 Y49.24228
G01 X53.55645 Y49.16240
G01 X53.63039 Y49.02409
G01 X53.66714 Y48.93535
G01 X53.71266 Y48.78528
G01 X53.72914 Y48.70245
G01 X53.72914 Y48.27144
G01 X53.74560 Y48.18866
G01 X53.77586 Y48.08894
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.68241 Y48.08899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.68241 Y48.08899
G01 X53.71266 Y48.18866
G01 X53.72914 Y48.27144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.72914 Y48.70245 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.72914 Y48.70245
G01 X53.74560 Y48.78528
G01 X53.79112 Y48.93535
G01 X53.82790 Y49.02409
G01 X53.90181 Y49.16240
G01 X53.95518 Y49.24228
G01 X54.05467 Y49.36351
G01 X54.12259 Y49.43143
G01 X54.24383 Y49.53092
G01 X54.32371 Y49.58429
G01 X54.46201 Y49.65820
G01 X54.55076 Y49.69496
G01 X54.70082 Y49.74050
G01 X54.79503 Y49.75922
G01 X54.95111 Y49.77461
G01 X55.04718 Y49.77461
G01 X55.20323 Y49.75922
G01 X55.29744 Y49.74050
G01 X55.44753 Y49.69496
G01 X55.53628 Y49.65820
G01 X55.67458 Y49.58429
G01 X55.75444 Y49.53092
G01 X55.87567 Y49.43143
G01 X55.94359 Y49.36351
G01 X56.04308 Y49.24228
G01 X56.09645 Y49.16240
G01 X56.17039 Y49.02409
G01 X56.20714 Y48.93535
G01 X56.24913 Y48.79692
G01 X56.25093 Y48.78482
G01 X56.26031 Y48.68998
G01 X56.26800 Y48.53314
G01 X56.26800 Y48.44081
G01 X56.26031 Y48.28399
G01 X56.25093 Y48.18917
G01 X56.24913 Y48.17698
G01 X56.24913 Y47.82885
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.12170 Y47.85874 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.12170 Y47.85874
G01 X56.17039 Y47.94983
G01 X56.20714 Y48.03857
G01 X56.24913 Y48.17698
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.24913 Y48.79692 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.24913 Y48.79692
G01 X56.24913 Y49.28696
G01 X56.25855 Y49.38256
G01 X56.28644 Y49.47449
G01 X56.33171 Y49.55919
G01 X56.39267 Y49.63344
G01 X56.46691 Y49.69437
G01 X56.55162 Y49.73966
G01 X56.64354 Y49.76755
G01 X56.73915 Y49.77697
G01 X58.31006 Y49.77697
G01 X58.33912 Y49.74903
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.33747 Y50.07583 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.33747 Y50.07583
G01 X58.26312 Y50.07583
G01 X58.10704 Y50.09120
G01 X58.01283 Y50.10994
G01 X57.86274 Y50.15546
G01 X57.77402 Y50.19221
G01 X57.66162 Y50.25228
G01 X57.63569 Y50.26615
G01 X57.55583 Y50.31952
G01 X57.43460 Y50.41901
G01 X57.36668 Y50.48693
G01 X57.26719 Y50.60816
G01 X57.21382 Y50.68802
G01 X57.13988 Y50.82632
G01 X57.10313 Y50.91507
G01 X57.05761 Y51.06516
G01 X57.03887 Y51.15937
G01 X57.02350 Y51.31543
G01 X57.02350 Y51.32739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.19218 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.19218 Y55.05659
G01 X58.21605 Y55.08047
G01 X58.26312 Y55.07582
G01 X58.35916 Y55.07582
G01 X58.40620 Y55.08044
G01 X58.43005 Y55.05659
G01 X58.40930 Y55.05347
G01 X58.21298 Y55.05347
G01 X58.19218 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.59413 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.59413 Y56.45855
G01 X59.59878 Y56.41148
G01 X59.59878 Y56.31544
G01 X59.59416 Y56.26840
G01 X59.61603 Y56.24653
G01 X59.62479 Y56.36347
G01 X59.61603 Y56.48044
G01 X59.59413 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.19220 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.19220 Y57.67035
G01 X58.21296 Y57.67348
G01 X58.40930 Y57.67348
G01 X58.43005 Y57.67035
G01 X58.40617 Y57.64648
G01 X58.35916 Y57.65110
G01 X58.26312 Y57.65110
G01 X58.21608 Y57.64648
G01 X58.19220 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.54613 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.54613 Y56.45855
G01 X56.55078 Y56.41148
G01 X56.55078 Y56.31544
G01 X56.54616 Y56.26840
G01 X56.78713 Y56.02741
G01 X57.02812 Y56.26843
G01 X57.02350 Y56.31544
G01 X57.02350 Y56.41148
G01 X57.02812 Y56.45855
G01 X56.78713 Y56.69954
G01 X56.54613 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.14420 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.14420 Y57.67035
G01 X55.16496 Y57.67348
G01 X55.36130 Y57.67348
G01 X55.38205 Y57.67035
G01 X55.35817 Y57.64648
G01 X55.31116 Y57.65110
G01 X55.21512 Y57.65110
G01 X55.16808 Y57.64648
G01 X55.14420 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.49813 Y56.45855 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.49813 Y56.45855
G01 X53.50278 Y56.41148
G01 X53.50278 Y56.31544
G01 X53.49816 Y56.26840
G01 X53.73913 Y56.02741
G01 X53.98012 Y56.26843
G01 X53.97550 Y56.31544
G01 X53.97550 Y56.41148
G01 X53.98012 Y56.45855
G01 X53.73913 Y56.69954
G01 X53.49813 Y56.45855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.09620 Y57.67035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.09620 Y57.67035
G01 X52.11696 Y57.67348
G01 X52.31330 Y57.67348
G01 X52.33405 Y57.67035
G01 X52.31017 Y57.64648
G01 X52.26316 Y57.65110
G01 X52.16712 Y57.65110
G01 X52.12008 Y57.64648
G01 X52.09620 Y57.67035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.45013 Y56.41854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.45013 Y56.41854
G01 X50.45478 Y56.37150
G01 X50.45478 Y56.27544
G01 X50.45016 Y56.22842
G01 X50.67114 Y56.00744
G01 X50.93212 Y56.26843
G01 X50.92750 Y56.31544
G01 X50.92750 Y56.41148
G01 X50.93212 Y56.45855
G01 X50.71114 Y56.67953
G01 X50.45013 Y56.41854
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.04820 Y57.63035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.04820 Y57.63035
G01 X49.06896 Y57.63347
G01 X49.26530 Y57.63347
G01 X49.28605 Y57.63035
G01 X49.26217 Y57.60647
G01 X49.21516 Y57.61110
G01 X49.11912 Y57.61110
G01 X49.07208 Y57.60647
G01 X49.04820 Y57.63035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.09618 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.09618 Y55.05659
G01 X52.11698 Y55.05347
G01 X52.31330 Y55.05347
G01 X52.33405 Y55.05659
G01 X52.31020 Y55.08044
G01 X52.26316 Y55.07582
G01 X52.16712 Y55.07582
G01 X52.12005 Y55.08047
G01 X52.09618 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.14418 Y55.05659 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.14418 Y55.05659
G01 X55.16498 Y55.05347
G01 X55.36130 Y55.05347
G01 X55.38205 Y55.05659
G01 X55.35820 Y55.08044
G01 X55.31116 Y55.07582
G01 X55.21512 Y55.07582
G01 X55.16805 Y55.08047
G01 X55.14418 Y55.05659
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.54931 Y51.32604 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.54931 Y51.32604
G01 X56.55078 Y51.32371
G01 X56.55078 Y51.31543
G01 X56.53541 Y51.15937
G01 X56.51667 Y51.06516
G01 X56.49084 Y50.97999
G01 X56.47115 Y50.91507
G01 X56.43437 Y50.82632
G01 X56.36046 Y50.68802
G01 X56.30709 Y50.60816
G01 X56.20760 Y50.48693
G01 X56.13968 Y50.41901
G01 X56.01845 Y50.31952
G01 X55.93859 Y50.26615
G01 X55.80026 Y50.19221
G01 X55.71151 Y50.15546
G01 X55.56145 Y50.10994
G01 X55.46724 Y50.09120
G01 X55.31116 Y50.07583
G01 X55.21512 Y50.07583
G01 X55.05904 Y50.09120
G01 X54.96483 Y50.10994
G01 X54.81474 Y50.15546
G01 X54.72602 Y50.19221
G01 X54.68982 Y50.21157
G01 X54.58769 Y50.26615
G01 X54.50783 Y50.31952
G01 X54.38660 Y50.41901
G01 X54.31868 Y50.48693
G01 X54.21919 Y50.60816
G01 X54.16582 Y50.68802
G01 X54.09188 Y50.82632
G01 X54.05513 Y50.91507
G01 X54.00961 Y51.06516
G01 X53.99087 Y51.15937
G01 X53.97550 Y51.31543
G01 X53.97550 Y51.32739
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.50131 Y51.32604 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.50131 Y51.32604
G01 X53.50278 Y51.32371
G01 X53.50278 Y51.31543
G01 X53.48741 Y51.15937
G01 X53.46867 Y51.06516
G01 X53.44284 Y50.97999
G01 X53.42315 Y50.91507
G01 X53.38637 Y50.82632
G01 X53.31246 Y50.68802
G01 X53.25909 Y50.60816
G01 X53.15960 Y50.48693
G01 X53.09168 Y50.41901
G01 X52.97045 Y50.31952
G01 X52.89059 Y50.26615
G01 X52.75226 Y50.19221
G01 X52.66351 Y50.15546
G01 X52.51345 Y50.10994
G01 X52.41924 Y50.09120
G01 X52.26316 Y50.07583
G01 X52.16712 Y50.07583
G01 X52.01104 Y50.09120
G01 X51.91683 Y50.10994
G01 X51.84980 Y50.13026
G01 X51.76674 Y50.15546
G01 X51.67802 Y50.19221
G01 X51.53969 Y50.26615
G01 X51.45983 Y50.31952
G01 X51.33860 Y50.41901
G01 X51.27068 Y50.48693
G01 X51.17119 Y50.60816
G01 X51.11782 Y50.68802
G01 X51.04388 Y50.82632
G01 X51.00713 Y50.91507
G01 X50.96161 Y51.06516
G01 X50.94287 Y51.15937
G01 X50.92816 Y51.30862
G01 X50.93032 Y51.31218
G01 X50.98673 Y51.40572
G01 X51.05897 Y51.55619
G01 X51.06298 Y51.56732
G01 X51.08607 Y51.62404
G01 X51.08645 Y51.62482
G01 X51.12481 Y51.72985
G01 X51.12681 Y51.73709
G01 X51.13959 Y51.77166
G01 X51.16659 Y51.83498
G01 X51.20350 Y51.91103
G01 X51.24043 Y51.97334
G01 X51.26220 Y52.00778
G01 X51.27838 Y52.03079
G01 X51.30723 Y52.07011
G01 X51.37820 Y52.15175
G01 X51.42592 Y52.20148
G01 X51.43542 Y52.21045
G01 X51.54777 Y52.30026
G01 X51.58495 Y52.32802
G01 X51.60471 Y52.33905
G01 X51.74284 Y52.41334
G01 X51.75242 Y52.41840
G01 X51.80708 Y52.43861
G01 X51.93260 Y52.47918
G01 X51.95694 Y52.48487
G01 X52.02468 Y52.49726
G01 X52.12011 Y52.50991
G01 X52.18071 Y52.51288
G01 X52.24952 Y52.51288
G01 X52.31012 Y52.50991
G01 X52.40558 Y52.49726
G01 X52.47334 Y52.48487
G01 X52.49765 Y52.47918
G01 X52.62318 Y52.43861
G01 X52.67784 Y52.41840
G01 X52.68739 Y52.41337
G01 X52.82551 Y52.33907
G01 X52.84530 Y52.32802
G01 X52.88251 Y52.30024
G01 X52.99483 Y52.21045
G01 X53.00433 Y52.20148
G01 X53.05203 Y52.15175
G01 X53.12302 Y52.07011
G01 X53.15185 Y52.03079
G01 X53.18980 Y51.97339
G01 X53.22676 Y51.91096
G01 X53.26364 Y51.83503
G01 X53.29066 Y51.77166
G01 X53.30413 Y51.73524
G01 X53.30651 Y51.72747
G01 X53.31043 Y51.71497
G01 X53.34578 Y51.62452
G01 X53.36313 Y51.58761
G01 X53.37687 Y51.55668
G01 X53.38843 Y51.52904
G01 X53.45175 Y51.40646
G01 X53.50131 Y51.32607
G01 X53.50131 Y51.32604
G01 X53.56595 Y51.30227
G01 X53.62526 Y51.28723
G01 X53.72673 Y51.27258
G01 X53.82902 Y51.27933
G01 X53.92770 Y51.30725
G01 X53.97466 Y51.32607
G01 X53.97550 Y51.32739
G01 X53.98162 Y51.33722
G01 X54.02587 Y51.40659
G01 X54.10296 Y51.55660
G01 X54.11522 Y51.58789
G01 X54.13097 Y51.62498
G01 X54.13994 Y51.64464
G01 X54.17413 Y51.73524
G01 X54.18759 Y51.77166
G01 X54.21459 Y51.83498
G01 X54.25150 Y51.91103
G01 X54.28843 Y51.97334
G01 X54.31020 Y52.00778
G01 X54.32638 Y52.03079
G01 X54.35523 Y52.07011
G01 X54.42620 Y52.15175
G01 X54.47392 Y52.20148
G01 X54.48342 Y52.21045
G01 X54.59577 Y52.30026
G01 X54.63295 Y52.32802
G01 X54.65271 Y52.33905
G01 X54.79084 Y52.41334
G01 X54.80042 Y52.41840
G01 X54.85508 Y52.43861
G01 X54.98060 Y52.47918
G01 X55.00494 Y52.48487
G01 X55.07268 Y52.49726
G01 X55.16811 Y52.50991
G01 X55.22871 Y52.51288
G01 X55.29752 Y52.51288
G01 X55.35812 Y52.50991
G01 X55.45358 Y52.49726
G01 X55.52134 Y52.48487
G01 X55.54565 Y52.47918
G01 X55.67118 Y52.43861
G01 X55.72584 Y52.41840
G01 X55.73539 Y52.41337
G01 X55.87351 Y52.33907
G01 X55.89330 Y52.32802
G01 X55.93051 Y52.30024
G01 X56.04283 Y52.21045
G01 X56.05233 Y52.20148
G01 X56.10003 Y52.15175
G01 X56.17102 Y52.07011
G01 X56.19985 Y52.03079
G01 X56.23780 Y51.97339
G01 X56.27476 Y51.91096
G01 X56.31164 Y51.83503
G01 X56.33866 Y51.77166
G01 X56.35213 Y51.73524
G01 X56.35451 Y51.72747
G01 X56.35843 Y51.71497
G01 X56.39378 Y51.62452
G01 X56.41113 Y51.58761
G01 X56.42487 Y51.55668
G01 X56.43643 Y51.52904
G01 X56.49975 Y51.40646
G01 X56.54931 Y51.32607
G01 X56.54931 Y51.32604
G01 X56.61395 Y51.30227
G01 X56.67326 Y51.28723
G01 X56.77473 Y51.27258
G01 X56.87702 Y51.27933
G01 X56.97570 Y51.30725
G01 X57.02266 Y51.32607
G01 X57.02350 Y51.32739
G01 X57.02962 Y51.33722
G01 X57.07387 Y51.40659
G01 X57.15096 Y51.55660
G01 X57.16322 Y51.58789
G01 X57.17897 Y51.62498
G01 X57.18794 Y51.64464
G01 X57.22213 Y51.73524
G01 X57.23559 Y51.77166
G01 X57.26259 Y51.83498
G01 X57.29950 Y51.91103
G01 X57.33643 Y51.97334
G01 X57.35820 Y52.00778
G01 X57.37438 Y52.03079
G01 X57.40323 Y52.07011
G01 X57.47420 Y52.15175
G01 X57.52192 Y52.20148
G01 X57.53142 Y52.21045
G01 X57.64377 Y52.30026
G01 X57.68095 Y52.32802
G01 X57.70071 Y52.33905
G01 X57.83884 Y52.41334
G01 X57.84842 Y52.41840
G01 X57.90308 Y52.43861
G01 X58.02860 Y52.47918
G01 X58.05294 Y52.48487
G01 X58.12068 Y52.49726
G01 X58.21611 Y52.50991
G01 X58.27671 Y52.51288
G01 X58.34552 Y52.51288
G01 X58.40612 Y52.50991
G01 X58.50158 Y52.49726
G01 X58.56934 Y52.48487
G01 X58.59365 Y52.47918
G01 X58.71918 Y52.43861
G01 X58.77384 Y52.41840
G01 X58.78339 Y52.41337
G01 X58.92151 Y52.33907
G01 X58.94130 Y52.32802
G01 X58.97851 Y52.30024
G01 X59.09083 Y52.21045
G01 X59.10033 Y52.20148
G01 X59.14803 Y52.15175
G01 X59.21902 Y52.07011
G01 X59.24785 Y52.03079
G01 X59.28580 Y51.97339
G01 X59.32276 Y51.91096
G01 X59.35964 Y51.83503
G01 X59.38666 Y51.77166
G01 X59.39944 Y51.73709
G01 X59.43162 Y51.62142
G01 X59.44681 Y51.55411
G01 X59.44702 Y51.55302
G01 X59.46106 Y51.39793
G01 X59.46335 Y51.36346
G01 X59.46106 Y51.32902
G01 X59.44699 Y51.17392
G01 X59.44681 Y51.17283
G01 X59.43162 Y51.10555
G01 X59.39944 Y50.98985
G01 X59.38666 Y50.95528
G01 X59.35964 Y50.89191
G01 X59.32276 Y50.81599
G01 X59.28580 Y50.75355
G01 X59.24785 Y50.69615
G01 X59.21902 Y50.65683
G01 X59.14803 Y50.57519
G01 X59.10033 Y50.52546
G01 X59.09083 Y50.51650
G01 X58.97851 Y50.42671
G01 X58.94130 Y50.39894
G01 X58.92146 Y50.38784
G01 X58.78334 Y50.31357
G01 X58.77384 Y50.30857
G01 X58.74056 Y50.29564
G01 X58.71933 Y50.28802
G01 X58.71778 Y50.28746
G01 X58.70470 Y50.28271
G01 X58.57773 Y50.22216
G01 X58.57580 Y50.22099
G01 X58.52187 Y50.19145
G01 X58.50612 Y50.18360
G01 X58.35763 Y50.09097
G01 X58.33749 Y50.07583
G01 X58.33747 Y50.07583
G01 X58.33711 Y50.07555
G01 X58.31463 Y49.99160
G01 X58.30506 Y49.93118
G01 X58.29967 Y49.82889
G01 X58.30752 Y49.77941
G01 X58.31003 Y49.77697
G01 X58.33912 Y49.74903
G01 X58.43414 Y49.67372
G01 X58.48433 Y49.63064
G01 X58.56881 Y49.55201
G01 X58.61588 Y49.50375
G01 X58.64072 Y49.46511
G01 X58.65969 Y49.43125
G01 X58.68616 Y49.34512
G01 X58.68822 Y49.32762
G01 X58.68938 Y49.28698
G01 X58.68938 Y47.68699
G01 X58.68822 Y47.64632
G01 X58.68616 Y47.62882
G01 X58.65969 Y47.54269
G01 X58.61585 Y47.47020
G01 X58.55591 Y47.41025
G01 X58.48342 Y47.36641
G01 X58.39726 Y47.33995
G01 X58.37978 Y47.33789
G01 X58.33912 Y47.33672
G01 X56.73912 Y47.33672
G01 X56.69848 Y47.33789
G01 X56.68098 Y47.33995
G01 X56.59485 Y47.36641
G01 X56.52233 Y47.41025
G01 X56.46241 Y47.47017
G01 X56.43592 Y47.51160
G01 X56.39675 Y47.57782
G01 X56.37555 Y47.61620
G01 X56.33907 Y47.68699
G01 X56.24913 Y47.82885
G01 X56.24862 Y47.82966
G01 X56.24286 Y47.83189
G01 X56.18408 Y47.84886
G01 X56.12355 Y47.85966
G01 X56.06272 Y47.82961
G01 X55.98119 Y47.78249
G01 X55.91675 Y47.74129
G01 X55.86490 Y47.70464
G01 X55.84583 Y47.69069
G01 X55.78916 Y47.64792
G01 X55.77392 Y47.63606
G01 X55.76308 Y47.62742
G01 X55.76287 Y47.62725
G01 X55.66648 Y47.55021
G01 X55.62927 Y47.52242
G01 X55.60948 Y47.51137
G01 X55.47138 Y47.43710
G01 X55.46186 Y47.43207
G01 X55.40722 Y47.41188
G01 X55.28164 Y47.37129
G01 X55.25736 Y47.36560
G01 X55.18957 Y47.35320
G01 X55.09412 Y47.34053
G01 X55.03354 Y47.33756
G01 X54.96473 Y47.33756
G01 X54.90415 Y47.34053
G01 X54.80867 Y47.35320
G01 X54.74085 Y47.36560
G01 X54.71660 Y47.37129
G01 X54.59102 Y47.41188
G01 X54.53638 Y47.43207
G01 X54.52691 Y47.43708
G01 X54.38878 Y47.51135
G01 X54.36895 Y47.52244
G01 X54.33173 Y47.55021
G01 X54.21942 Y47.64000
G01 X54.20992 Y47.64896
G01 X54.16221 Y47.69870
G01 X54.08251 Y47.79036
G01 X54.05952 Y47.81729
G01 X54.01187 Y47.87032
G01 X54.00697 Y47.87576
G01 X53.96430 Y47.92234
G01 X53.89778 Y47.98716
G01 X53.82650 Y48.04934
G01 X53.77586 Y48.08894
G01 X53.73057 Y48.09140
G01 X53.68241 Y48.08899
G01 X53.66994 Y48.07926
G01 X53.63278 Y48.04896
G01 X53.56039 Y47.98727
G01 X53.46158 Y47.88757
G01 X53.44731 Y47.87035
G01 X53.39897 Y47.81711
G01 X53.37860 Y47.79364
G01 X53.29605 Y47.69870
G01 X53.24832 Y47.64896
G01 X53.23882 Y47.64000
G01 X53.12648 Y47.55018
G01 X53.08929 Y47.52244
G01 X53.06948 Y47.51137
G01 X52.93138 Y47.43710
G01 X52.92186 Y47.43207
G01 X52.86722 Y47.41188
G01 X52.74164 Y47.37129
G01 X52.71736 Y47.36560
G01 X52.64957 Y47.35320
G01 X52.55412 Y47.34053
G01 X52.49354 Y47.33756
G01 X52.42473 Y47.33756
G01 X52.36415 Y47.34053
G01 X52.26867 Y47.35320
G01 X52.20085 Y47.36560
G01 X52.17660 Y47.37129
G01 X52.05102 Y47.41188
G01 X51.99638 Y47.43207
G01 X51.98691 Y47.43708
G01 X51.84878 Y47.51135
G01 X51.82895 Y47.52244
G01 X51.79173 Y47.55021
G01 X51.67942 Y47.64000
G01 X51.66992 Y47.64896
G01 X51.62221 Y47.69870
G01 X51.54251 Y47.79036
G01 X51.51952 Y47.81729
G01 X51.47187 Y47.87032
G01 X51.46697 Y47.87576
G01 X51.42430 Y47.92234
G01 X51.35778 Y47.98716
G01 X51.28650 Y48.04934
G01 X51.23586 Y48.08894
G01 X51.19057 Y48.09140
G01 X51.14241 Y48.08899
G01 X51.12994 Y48.07926
G01 X51.09278 Y48.04896
G01 X51.02039 Y47.98727
G01 X50.92158 Y47.88757
G01 X50.90731 Y47.87035
G01 X50.85897 Y47.81711
G01 X50.83860 Y47.79364
G01 X50.75605 Y47.69870
G01 X50.70832 Y47.64896
G01 X50.69882 Y47.64000
G01 X50.58648 Y47.55018
G01 X50.54929 Y47.52244
G01 X50.52948 Y47.51137
G01 X50.39138 Y47.43710
G01 X50.38186 Y47.43207
G01 X50.32722 Y47.41188
G01 X50.20164 Y47.37129
G01 X50.17736 Y47.36560
G01 X50.10957 Y47.35320
G01 X50.01412 Y47.34053
G01 X49.95354 Y47.33756
G01 X49.88473 Y47.33756
G01 X49.82415 Y47.34053
G01 X49.72867 Y47.35320
G01 X49.66085 Y47.36560
G01 X49.63660 Y47.37129
G01 X49.51102 Y47.41188
G01 X49.45638 Y47.43207
G01 X49.44691 Y47.43708
G01 X49.30878 Y47.51135
G01 X49.28895 Y47.52244
G01 X49.25173 Y47.55021
G01 X49.13942 Y47.64000
G01 X49.12992 Y47.64896
G01 X49.08221 Y47.69870
G01 X49.01125 Y47.78033
G01 X48.98239 Y47.81965
G01 X48.94447 Y47.87705
G01 X48.90746 Y47.93949
G01 X48.87061 Y48.01541
G01 X48.84358 Y48.07878
G01 X48.83081 Y48.11335
G01 X48.79862 Y48.22905
G01 X48.78343 Y48.29633
G01 X48.78326 Y48.29742
G01 X48.76919 Y48.45252
G01 X48.76690 Y48.48696
G01 X48.76919 Y48.52143
G01 X48.78323 Y48.67652
G01 X48.78343 Y48.67761
G01 X48.79862 Y48.74492
G01 X48.83078 Y48.86057
G01 X48.84358 Y48.89516
G01 X48.87061 Y48.95854
G01 X48.90746 Y49.03446
G01 X48.94447 Y49.09689
G01 X48.97747 Y49.14749
G01 X48.98239 Y49.15429
G01 X49.01125 Y49.19361
G01 X49.08221 Y49.27525
G01 X49.12992 Y49.32498
G01 X49.13942 Y49.33395
G01 X49.20434 Y49.38584
G01 X49.25008 Y49.42574
G01 X49.26123 Y49.43636
G01 X49.29303 Y49.46483
G01 X49.30302 Y49.47327
G01 X49.41722 Y49.59234
G01 X49.44284 Y49.62493
G01 X49.47886 Y49.66824
G01 X49.48861 Y49.67934
G01 X49.50929 Y49.70667
G01 X49.51046 Y49.70822
G01 X49.51470 Y49.77824
G01 X49.49949 Y49.87954
G01 X49.46357 Y49.97545
G01 X49.43624 Y50.03019
G01 X49.41699 Y50.06039
G01 X49.46545 Y50.06994
G01 X49.61551 Y50.11545
G01 X49.70426 Y50.15221
G01 X49.84259 Y50.22615
G01 X49.92245 Y50.27951
G01 X50.04368 Y50.37901
G01 X50.11160 Y50.44692
G01 X50.21109 Y50.56816
G01 X50.26446 Y50.64802
G01 X50.33837 Y50.78632
G01 X50.37515 Y50.87507
G01 X50.39951 Y50.95543
G01 X50.42067 Y51.02516
G01 X50.43941 Y51.11936
G01 X50.45478 Y51.27542
G01 X50.45478 Y51.30288
G01 X50.41282 Y51.36734
G01 X50.33667 Y51.51007
G01 X50.33370 Y51.51715
G01 X50.31036 Y51.56780
G01 X50.30136 Y51.58561
G01 X50.26141 Y51.68096
G01 X50.24266 Y51.73166
G01 X50.21566 Y51.79500
G01 X50.17878 Y51.87095
G01 X50.14180 Y51.93338
G01 X50.10383 Y51.99084
G01 X50.07502 Y52.03011
G01 X50.00401 Y52.11177
G01 X49.95633 Y52.16148
G01 X49.94683 Y52.17044
G01 X49.83451 Y52.26023
G01 X49.79725 Y52.28802
G01 X49.77751 Y52.29907
G01 X49.63939 Y52.37336
G01 X49.62984 Y52.37839
G01 X49.57518 Y52.39861
G01 X49.44965 Y52.43917
G01 X49.42534 Y52.44486
G01 X49.35758 Y52.45726
G01 X49.26212 Y52.46991
G01 X49.20152 Y52.47288
G01 X49.13271 Y52.47288
G01 X49.07211 Y52.46991
G01 X48.97668 Y52.45726
G01 X48.90894 Y52.44486
G01 X48.88460 Y52.43917
G01 X48.75908 Y52.39861
G01 X48.70442 Y52.37839
G01 X48.69484 Y52.37334
G01 X48.55671 Y52.29904
G01 X48.53695 Y52.28802
G01 X48.49977 Y52.26026
G01 X48.38742 Y52.17044
G01 X48.37792 Y52.16148
G01 X48.33022 Y52.11177
G01 X48.25923 Y52.03011
G01 X48.23040 Y51.99084
G01 X48.19240 Y51.93333
G01 X48.15547 Y51.87095
G01 X48.11856 Y51.79495
G01 X48.09159 Y51.73166
G01 X48.07881 Y51.69709
G01 X48.07490 Y51.68309
G01 X48.04663 Y51.58142
G01 X48.03144 Y51.51416
G01 X48.03126 Y51.51301
G01 X48.01717 Y51.35797
G01 X48.01491 Y51.32348
G01 X48.01719 Y51.28896
G01 X48.03124 Y51.13394
G01 X48.03144 Y51.13278
G01 X48.04648 Y51.06615
G01 X48.04663 Y51.06554
G01 X48.07881 Y50.94984
G01 X48.09159 Y50.91528
G01 X48.11859 Y50.85195
G01 X48.15547 Y50.77598
G01 X48.19243 Y50.71360
G01 X48.23038 Y50.65617
G01 X48.25923 Y50.61685
G01 X48.33020 Y50.53519
G01 X48.37795 Y50.48546
G01 X48.38742 Y50.47649
G01 X48.49977 Y50.38670
G01 X48.53698 Y50.35891
G01 X48.55677 Y50.34786
G01 X48.69486 Y50.27360
G01 X48.70434 Y50.26859
G01 X48.75903 Y50.24837
G01 X48.88460 Y50.20778
G01 X48.90889 Y50.20209
G01 X48.97668 Y50.18970
G01 X49.00149 Y50.18640
G01 X49.11163 Y50.16280
G01 X49.13103 Y50.15703
G01 X49.17193 Y50.14614
G01 X49.20505 Y50.13826
G01 X49.36814 Y50.08221
G01 X49.41699 Y50.06039
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.41282 Y51.36734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.41282 Y51.36734
G01 X50.45417 Y51.30382
G01 X50.51305 Y51.28215
G01 X50.57236 Y51.26714
G01 X50.67370 Y51.25251
G01 X50.77589 Y51.25929
G01 X50.87444 Y51.28716
G01 X50.92816 Y51.30862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.04820 Y55.01661 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.04820 Y55.01661
G01 X49.07203 Y55.04046
G01 X49.11912 Y55.03582
G01 X49.21516 Y55.03582
G01 X49.26220 Y55.04046
G01 X49.28605 Y55.01661
G01 X49.26530 Y55.01349
G01 X49.06896 Y55.01349
G01 X49.04820 Y55.01661
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.85346 Y56.32347 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.85346 Y56.32347
G01 X47.86223 Y56.44044
G01 X47.88412 Y56.41854
G01 X47.87950 Y56.37150
G01 X47.87950 Y56.27544
G01 X47.88412 Y56.22842
G01 X47.86223 Y56.20653
G01 X47.85346 Y56.32347
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.11390 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.11390 Y55.62670
G01 X42.13041 Y55.54399
G01 X42.16066 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.06722 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.06722 Y55.44435
G01 X42.09747 Y55.54399
G01 X42.11390 Y55.62670
G01 X42.11390 Y56.05771
G01 X42.09747 Y56.14061
G01 X42.06714 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.16064 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.16064 Y56.24031
G01 X42.13041 Y56.14061
G01 X42.11390 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.57390 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.57390 Y55.62670
G01 X39.59041 Y55.54399
G01 X39.62066 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.52722 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.52722 Y55.44435
G01 X39.55747 Y55.54399
G01 X39.57390 Y55.62670
G01 X39.57390 Y56.05771
G01 X39.55747 Y56.14061
G01 X39.52714 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.62064 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.62064 Y56.24031
G01 X39.59041 Y56.14061
G01 X39.57390 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.03393 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.03393 Y55.62670
G01 X37.05041 Y55.54399
G01 X37.08066 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.98722 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.98722 Y55.44435
G01 X37.01747 Y55.54399
G01 X37.03393 Y55.62670
G01 X37.03393 Y56.05771
G01 X37.01747 Y56.14061
G01 X36.98714 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.08064 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.08064 Y56.24031
G01 X37.05041 Y56.14061
G01 X37.03393 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.49393 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.49393 Y56.05771
G01 X34.51041 Y56.14061
G01 X34.54064 Y56.24031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.44714 Y56.24041 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.44714 Y56.24041
G01 X34.47747 Y56.14061
G01 X34.49393 Y56.05771
G01 X34.49393 Y55.62670
G01 X34.47747 Y55.54399
G01 X34.44722 Y55.44435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.54066 Y55.44427 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.54066 Y55.44427
G01 X34.51041 Y55.54399
G01 X34.49393 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.95711 Y50.52564 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.95711 Y50.52564
G01 X39.94733 Y50.49663
G01 X39.94276 Y50.48243
G01 X39.91779 Y50.41406
G01 X39.88800 Y50.34215
G01 X39.87654 Y50.31591
G01 X39.87393 Y50.31032
G01 X39.85219 Y50.25724
G01 X39.79608 Y50.10042
G01 X39.78269 Y50.05645
G01 X39.74342 Y49.89963
G01 X39.73656 Y49.86529
G01 X39.71330 Y49.70847
G01 X39.71045 Y49.67967
G01 X39.70276 Y49.52282
G01 X39.70276 Y49.49582
G01 X39.71045 Y49.33900
G01 X39.71330 Y49.31020
G01 X39.73656 Y49.15335
G01 X39.74342 Y49.11901
G01 X39.78269 Y48.96219
G01 X39.79608 Y48.91823
G01 X39.85219 Y48.76141
G01 X39.87654 Y48.70273
G01 X39.95074 Y48.54591
G01 X39.99349 Y48.46618
G01 X40.03641 Y48.39455
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.30739 Y49.42963 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.30739 Y49.42963
G01 X32.99909 Y46.12136
G01 X32.96345 Y46.08905
G01 X32.91042 Y46.04554
G01 X32.83056 Y45.99217
G01 X32.77006 Y45.95981
G01 X32.68131 Y45.92306
G01 X32.61565 Y45.90314
G01 X32.52144 Y45.88440
G01 X32.45314 Y45.87769
G01 X32.40513 Y45.87533
G01 X23.84287 Y45.87533
G01 X23.17881 Y45.21132
G01 X22.67592 Y45.00302
G01 X22.39423 Y44.72133
G01 X22.18590 Y44.21836
G01 X20.31646 Y42.34897
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.86157 Y41.10643 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.86157 Y41.10643
G01 X21.86299 Y41.10864
G01 X21.90444 Y41.12525
G01 X22.00294 Y41.15319
G01 X22.10513 Y41.16005
G01 X22.20650 Y41.14552
G01 X22.20797 Y41.14517
G01 X22.25689 Y41.09515
G01 X22.25819 Y41.09391
G01 X22.37112 Y40.96427
G01 X22.41468 Y40.90295
G01 X22.41564 Y40.90160
G01 X22.44625 Y40.85830
G01 X22.49436 Y40.78001
G01 X22.50015 Y40.77082
G01 X22.50117 Y40.76919
G01 X22.53952 Y40.71428
G01 X22.60132 Y40.63432
G01 X22.63883 Y40.59289
G01 X22.68750 Y40.54423
G01 X22.72890 Y40.50671
G01 X22.76799 Y40.47651
G01 X22.80769 Y40.44346
G01 X22.85245 Y40.40333
G01 X22.86050 Y40.39622
G01 X22.89969 Y40.36206
G01 X22.97810 Y40.28355
G01 X23.03957 Y40.21316
G01 X23.08537 Y40.15614
G01 X23.08577 Y40.15566
G01 X23.17762 Y40.12779
G01 X23.26040 Y40.11133
G01 X24.49141 Y40.11133
G01 X24.57424 Y40.09485
G01 X24.72433 Y40.04931
G01 X24.81307 Y40.01255
G01 X24.95138 Y39.93864
G01 X25.03123 Y39.88527
G01 X25.15247 Y39.78578
G01 X25.22039 Y39.71786
G01 X25.25039 Y39.68131
G01 X25.70474 Y39.68131
G01 X25.75275 Y39.67895
G01 X25.82105 Y39.67224
G01 X25.91526 Y39.65350
G01 X25.98091 Y39.63359
G01 X26.06966 Y39.59683
G01 X26.13017 Y39.56447
G01 X26.21002 Y39.51111
G01 X26.26306 Y39.46760
G01 X26.29869 Y39.43529
G01 X27.63252 Y38.10143
G01 X27.63252 Y38.00075
G01 X27.63123 Y37.94664
G01 X27.62668 Y37.85414
G01 X27.61949 Y37.77961
G01 X27.61429 Y37.74454
G01 X27.61073 Y37.71576
G01 X27.60880 Y37.69610
G01 X27.60182 Y37.64858
G01 X27.59938 Y37.63631
G01 X27.59348 Y37.59691
G01 X27.59117 Y37.57365
G01 X27.58632 Y37.54063
G01 X27.58315 Y37.52465
G01 X27.57878 Y37.49536
G01 X27.57634 Y37.47067
G01 X27.57469 Y37.45711
G01 X27.57012 Y37.42630
G01 X27.56760 Y37.40082
G01 X27.56422 Y37.33219
G01 X27.56392 Y37.31990
G01 X27.56392 Y23.21271
G01 X27.56361 Y23.20042
G01 X27.56024 Y23.13182
G01 X27.55772 Y23.10636
G01 X27.54756 Y23.03776
G01 X27.54192 Y23.00951
G01 X27.52473 Y22.94091
G01 X27.51464 Y22.90771
G01 X27.49008 Y22.83911
G01 X27.48241 Y22.81924
G01 X27.19890 Y22.13476
G01 X26.17903 Y21.11490
G01 X26.17957 Y21.10934
G01 X26.17957 Y21.01328
G01 X26.16420 Y20.85722
G01 X26.14546 Y20.76301
G01 X26.09994 Y20.61292
G01 X26.06319 Y20.52418
G01 X25.98925 Y20.38587
G01 X25.93588 Y20.30601
G01 X25.83639 Y20.18478
G01 X25.76847 Y20.11686
G01 X25.64724 Y20.01737
G01 X25.58153 Y19.97348
G01 X24.27266 Y19.97348
G01 X24.24531 Y20.01785
G01 X24.19733 Y20.09133
G01 X24.16121 Y20.14224
G01 X24.12288 Y20.19199
G01 X24.10010 Y20.22009
G01 X24.05499 Y20.27302
G01 X24.05044 Y20.27830
G01 X23.98404 Y20.35468
G01 X23.95519 Y20.39400
G01 X23.91727 Y20.45140
G01 X23.88026 Y20.51384
G01 X23.84340 Y20.58976
G01 X23.81638 Y20.65313
G01 X23.80360 Y20.68770
G01 X23.77142 Y20.80340
G01 X23.76741 Y20.81854
G01 X23.75623 Y20.87071
G01 X23.75605 Y20.87177
G01 X23.74198 Y21.02687
G01 X23.73972 Y21.06133
G01 X23.74198 Y21.09578
G01 X23.75605 Y21.25092
G01 X23.75623 Y21.25196
G01 X23.75864 Y21.26509
G01 X23.76154 Y21.28003
G01 X23.76332 Y21.28884
G01 X23.76974 Y21.31978
G01 X23.78315 Y21.41787
G01 X23.78747 Y21.48051
G01 X23.79314 Y21.55976
G01 X23.78973 Y21.72575
G01 X23.78971 Y21.72758
G01 X23.79461 Y21.73675
G01 X23.84798 Y21.81663
G01 X23.94747 Y21.93786
G01 X24.01539 Y22.00578
G01 X24.13662 Y22.10527
G01 X24.21650 Y22.15864
G01 X24.35481 Y22.23255
G01 X24.44355 Y22.26931
G01 X24.59362 Y22.31485
G01 X24.67640 Y22.33131
G01 X25.03167 Y22.33131
G01 X25.09293 Y22.36029
G01 X25.17345 Y22.40324
G01 X25.31213 Y22.48638
G01 X25.37612 Y22.52910
G01 X25.50345 Y22.62354
G01 X25.55694 Y22.66740
G01 X25.67327 Y22.77284
G01 X25.72041 Y22.81998
G01 X25.82585 Y22.93631
G01 X25.86971 Y22.98980
G01 X25.96415 Y23.11713
G01 X26.00687 Y23.18112
G01 X26.09001 Y23.31980
G01 X26.13296 Y23.40032
G01 X26.17279 Y23.48452
G01 X26.24894 Y23.56067
G01 X26.24888 Y26.26478
G01 X26.53240 Y26.94926
G01 X26.54007 Y26.96912
G01 X26.56463 Y27.03773
G01 X26.57472 Y27.07095
G01 X26.59191 Y27.13955
G01 X26.59755 Y27.16780
G01 X26.60771 Y27.23638
G01 X26.61023 Y27.26188
G01 X26.61360 Y27.33049
G01 X26.61391 Y27.34278
G01 X26.61391 Y32.20952
G01 X26.61360 Y32.22182
G01 X26.61023 Y32.29045
G01 X26.60771 Y32.31592
G01 X26.59755 Y32.38453
G01 X26.59191 Y32.41277
G01 X26.57472 Y32.48138
G01 X26.56463 Y32.51458
G01 X26.54007 Y32.58318
G01 X26.53240 Y32.60304
G01 X26.24891 Y33.28747
G01 X25.54256 Y33.99385
G01 X25.52946 Y34.05963
G01 X25.48394 Y34.20970
G01 X25.44718 Y34.29844
G01 X25.37325 Y34.43675
G01 X25.31988 Y34.51663
G01 X25.22039 Y34.63786
G01 X25.15247 Y34.70578
G01 X25.03123 Y34.80527
G01 X24.95138 Y34.85864
G01 X24.81307 Y34.93255
G01 X24.72433 Y34.96931
G01 X24.57424 Y35.01485
G01 X24.49141 Y35.03131
G01 X23.26040 Y35.03133
G01 X23.17762 Y35.01485
G01 X23.08575 Y34.98696
G01 X23.08537 Y34.98650
G01 X23.03962 Y34.92958
G01 X22.97805 Y34.85907
G01 X22.89977 Y34.78066
G01 X22.86045 Y34.74640
G01 X22.85250 Y34.73936
G01 X22.80769 Y34.69918
G01 X22.76799 Y34.66613
G01 X22.72890 Y34.63593
G01 X22.68750 Y34.59842
G01 X22.63883 Y34.54975
G01 X22.60129 Y34.50832
G01 X22.53952 Y34.42836
G01 X22.50012 Y34.37182
G01 X22.49446 Y34.36276
G01 X22.42682 Y34.23319
G01 X22.41158 Y34.20218
G01 X22.40043 Y34.16949
G01 X22.38847 Y34.13141
G01 X22.34653 Y34.02748
G01 X22.34417 Y34.02270
G01 X22.32070 Y33.97061
G01 X22.31420 Y33.95453
G01 X22.23515 Y33.80472
G01 X22.18849 Y33.73322
G01 X22.18847 Y33.73319
G01 X22.16916 Y33.72461
G01 X22.11097 Y33.70571
G01 X22.01082 Y33.68445
G01 X21.90843 Y33.68445
G01 X21.84036 Y33.69888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.08537 Y34.98650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.08537 Y34.98650
G01 X23.08686 Y35.00073
G01 X23.08686 Y35.06192
G01 X23.08537 Y35.07614
G01 X23.08537 Y35.07617
G01 X23.03957 Y35.13316
G01 X22.97810 Y35.20355
G01 X22.89969 Y35.28206
G01 X22.86050 Y35.31622
G01 X22.85245 Y35.32333
G01 X22.80769 Y35.36347
G01 X22.76799 Y35.39651
G01 X22.72893 Y35.42669
G01 X22.68753 Y35.46423
G01 X22.63883 Y35.51292
G01 X22.59710 Y35.55897
G01 X22.52850 Y35.62524
G01 X22.52164 Y35.63100
G01 X22.47886 Y35.67009
G01 X22.47272 Y35.67616
G01 X22.34016 Y35.78312
G01 X22.28034 Y35.82298
G01 X22.24600 Y35.82270
G01 X22.18514 Y35.81630
G01 X22.08499 Y35.79501
G01 X22.06368 Y35.78551
G01 X21.85695 Y35.99224
G01 X21.86157 Y36.03928
G01 X21.86157 Y36.13535
G01 X21.85695 Y36.18241
G01 X22.20952 Y36.53499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.26040 Y37.57133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.26040 Y37.57133
G01 X23.17762 Y37.58779
G01 X23.08577 Y37.61566
G01 X23.08537 Y37.61614
G01 X23.03957 Y37.67316
G01 X23.08537 Y37.61617
G01 X23.08537 Y37.61614
G01 X23.08686 Y37.60192
G01 X23.08686 Y37.54073
G01 X23.08537 Y37.52650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.03957 Y37.67316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.03957 Y37.67316
G01 X22.97810 Y37.74355
G01 X22.89969 Y37.82206
G01 X22.86050 Y37.85622
G01 X22.85245 Y37.86333
G01 X22.80769 Y37.90346
G01 X22.76799 Y37.93651
G01 X22.72890 Y37.96671
G01 X22.68750 Y38.00423
G01 X22.63883 Y38.05289
G01 X22.60132 Y38.09432
G01 X22.53952 Y38.17428
G01 X22.50015 Y38.23082
G01 X22.49446 Y38.23986
G01 X22.42682 Y38.36945
G01 X22.41158 Y38.40047
G01 X22.40043 Y38.43316
G01 X22.35664 Y38.57260
G01 X22.35425 Y38.58304
G01 X22.34214 Y38.65089
G01 X22.32926 Y38.75109
G01 X22.32652 Y38.80692
G01 X22.32652 Y38.87573
G01 X22.32926 Y38.93158
G01 X22.34214 Y39.03178
G01 X22.35425 Y39.09963
G01 X22.35664 Y39.11004
G01 X22.40043 Y39.24949
G01 X22.41161 Y39.28220
G01 X22.42682 Y39.31319
G01 X22.49446 Y39.44276
G01 X22.50012 Y39.45182
G01 X22.53952 Y39.50836
G01 X22.60129 Y39.58832
G01 X22.63883 Y39.62975
G01 X22.68750 Y39.67842
G01 X22.72890 Y39.71593
G01 X22.76799 Y39.74613
G01 X22.80769 Y39.77918
G01 X22.85250 Y39.81936
G01 X22.86045 Y39.82640
G01 X22.89977 Y39.86066
G01 X22.97805 Y39.93907
G01 X23.03962 Y40.00958
G01 X23.08537 Y40.06650
G01 X23.08575 Y40.06696
G01 X23.17762 Y40.09485
G01 X23.26040 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.08537 Y40.06650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.08537 Y40.06650
G01 X23.08686 Y40.08073
G01 X23.08686 Y40.14192
G01 X23.08537 Y40.15614
G01 X23.08537 Y40.15617
G01 X23.03957 Y40.21316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.25689 Y41.09515 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.25689 Y41.09515
G01 X22.21056 Y41.14252
G01 X22.20368 Y41.17722
G01 X22.18829 Y41.33328
G01 X22.18829 Y41.42934
G01 X22.20368 Y41.58542
G01 X22.22240 Y41.67963
G01 X22.22517 Y41.68873
G01 X22.26794 Y41.82970
G01 X22.30470 Y41.91844
G01 X22.37861 Y42.05675
G01 X22.43198 Y42.13663
G01 X22.53147 Y42.25786
G01 X22.59939 Y42.32578
G01 X22.72062 Y42.42527
G01 X22.80050 Y42.47864
G01 X22.93881 Y42.55255
G01 X23.02756 Y42.58931
G01 X23.16588 Y42.63132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.18590 Y44.21836 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.18590 Y44.21836
G01 X22.18593 Y43.12131
G01 X22.19535 Y43.02573
G01 X22.22324 Y42.93381
G01 X22.26853 Y42.84907
G01 X22.32946 Y42.77483
G01 X22.40371 Y42.71389
G01 X22.41404 Y42.70836
G01 X22.48841 Y42.66861
G01 X22.58034 Y42.64072
G01 X22.67594 Y42.63132
G01 X23.16588 Y42.63132
G01 X23.17815 Y42.63312
G01 X23.27292 Y42.64250
G01 X23.42976 Y42.65019
G01 X23.47594 Y42.65131
G01 X24.27594 Y42.65131
G01 X24.32209 Y42.65019
G01 X24.47891 Y42.64250
G01 X24.57365 Y42.63312
G01 X24.58582 Y42.63132
G01 X25.07594 Y42.63132
G01 X25.17154 Y42.64072
G01 X25.26344 Y42.66861
G01 X25.34818 Y42.71389
G01 X25.42242 Y42.77483
G01 X25.48335 Y42.84907
G01 X25.52864 Y42.93381
G01 X25.55653 Y43.02573
G01 X25.56593 Y43.12131
G01 X25.56593 Y44.72131
G01 X25.55653 Y44.81691
G01 X25.52864 Y44.90884
G01 X25.48335 Y44.99354
G01 X25.42242 Y45.06779
G01 X25.34818 Y45.12872
G01 X25.26344 Y45.17401
G01 X25.17154 Y45.20190
G01 X25.07594 Y45.21132
G01 X23.17881 Y45.21132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.58582 Y42.63132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.58582 Y42.63132
G01 X24.72433 Y42.58931
G01 X24.81307 Y42.55255
G01 X24.95138 Y42.47864
G01 X25.03123 Y42.42527
G01 X25.15247 Y42.32578
G01 X25.22039 Y42.25786
G01 X25.24564 Y42.22710
G01 X25.31988 Y42.13663
G01 X25.37325 Y42.05675
G01 X25.44718 Y41.91844
G01 X25.48394 Y41.82970
G01 X25.52946 Y41.67963
G01 X25.54820 Y41.58542
G01 X25.56357 Y41.42934
G01 X25.56357 Y41.33328
G01 X25.54820 Y41.17722
G01 X25.52946 Y41.08301
G01 X25.48394 Y40.93292
G01 X25.44718 Y40.84418
G01 X25.37325 Y40.70587
G01 X25.31988 Y40.62601
G01 X25.22039 Y40.50478
G01 X25.15247 Y40.43686
G01 X25.03123 Y40.33737
G01 X24.95138 Y40.28400
G01 X24.81307 Y40.21006
G01 X24.72433 Y40.17331
G01 X24.57424 Y40.12779
G01 X24.49141 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.49141 Y37.57133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.49141 Y37.57133
G01 X24.57424 Y37.55485
G01 X24.72433 Y37.50931
G01 X24.81307 Y37.47255
G01 X24.95138 Y37.39864
G01 X25.03123 Y37.34527
G01 X25.15247 Y37.24578
G01 X25.22039 Y37.17786
G01 X25.31988 Y37.05663
G01 X25.37325 Y36.97675
G01 X25.44718 Y36.83844
G01 X25.48394 Y36.74970
G01 X25.52946 Y36.59963
G01 X25.54820 Y36.50542
G01 X25.56357 Y36.34934
G01 X25.56357 Y36.25328
G01 X25.54820 Y36.09722
G01 X25.52946 Y36.00301
G01 X25.48394 Y35.85292
G01 X25.44718 Y35.76418
G01 X25.37325 Y35.62587
G01 X25.31988 Y35.54601
G01 X25.22039 Y35.42478
G01 X25.15247 Y35.35686
G01 X25.03123 Y35.25737
G01 X24.95138 Y35.20400
G01 X24.81307 Y35.13006
G01 X24.72433 Y35.09331
G01 X24.57424 Y35.04779
G01 X24.49141 Y35.03131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.24891 Y33.28747 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.24891 Y33.28747
G01 X26.24894 Y33.92765
G01 X26.24894 Y37.10918
G01 X25.35679 Y38.00133
G01 X25.25039 Y38.00133
G01 X25.22039 Y37.96478
G01 X25.15247 Y37.89686
G01 X25.03123 Y37.79737
G01 X24.95138 Y37.74400
G01 X24.81307 Y37.67006
G01 X24.72433 Y37.63331
G01 X24.57424 Y37.58779
G01 X24.49141 Y37.57133
G01 X23.26040 Y37.57133
G01 X23.17762 Y37.55485
G01 X23.08575 Y37.52696
G01 X23.08537 Y37.52650
G01 X23.03962 Y37.46958
G01 X22.97805 Y37.39907
G01 X22.89977 Y37.32066
G01 X22.86045 Y37.28640
G01 X22.85250 Y37.27936
G01 X22.80769 Y37.23918
G01 X22.76799 Y37.20613
G01 X22.72890 Y37.17593
G01 X22.68750 Y37.13842
G01 X22.63883 Y37.08975
G01 X22.60129 Y37.04832
G01 X22.53952 Y36.96836
G01 X22.50137 Y36.91380
G01 X22.50012 Y36.91185
G01 X22.43337 Y36.82231
G01 X22.40211 Y36.78642
G01 X22.39223 Y36.77484
G01 X22.35024 Y36.72473
G01 X22.26721 Y36.63771
G01 X22.24102 Y36.59399
G01 X22.20952 Y36.53499
G01 X22.20368 Y36.50542
G01 X22.18829 Y36.34934
G01 X22.18829 Y36.25328
G01 X22.20368 Y36.09722
G01 X22.22240 Y36.00301
G01 X22.26794 Y35.85292
G01 X22.28034 Y35.82298
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.03957 Y35.13316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.03957 Y35.13316
G01 X23.08537 Y35.07614
G01 X23.08577 Y35.07566
G01 X23.17762 Y35.04779
G01 X23.26040 Y35.03133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.18847 Y33.73319 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.18847 Y33.73319
G01 X22.18829 Y33.73291
G01 X22.18829 Y33.71328
G01 X22.20368 Y33.55722
G01 X22.21056 Y33.52252
G01 X22.25689 Y33.47515
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.86157 Y33.48643 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.86157 Y33.48643
G01 X21.86299 Y33.48864
G01 X21.90444 Y33.50525
G01 X22.00294 Y33.53319
G01 X22.10513 Y33.54005
G01 X22.20650 Y33.52552
G01 X22.20797 Y33.52517
G01 X22.25689 Y33.47515
G01 X22.25819 Y33.47391
G01 X22.37112 Y33.34427
G01 X22.41468 Y33.28295
G01 X22.41564 Y33.28160
G01 X22.44625 Y33.23830
G01 X22.49441 Y33.15996
G01 X22.50012 Y33.15082
G01 X22.53952 Y33.09428
G01 X22.60129 Y33.01432
G01 X22.63883 Y32.97289
G01 X22.68750 Y32.92423
G01 X22.72890 Y32.88671
G01 X22.76799 Y32.85651
G01 X22.80769 Y32.82346
G01 X22.85245 Y32.78333
G01 X22.86050 Y32.77622
G01 X22.89969 Y32.74206
G01 X22.97810 Y32.66355
G01 X23.03957 Y32.59316
G01 X23.08537 Y32.53617
G01 X23.08537 Y32.53614
G01 X23.08686 Y32.52192
G01 X23.08686 Y32.46073
G01 X23.08537 Y32.44650
G01 X23.03962 Y32.38958
G01 X22.97805 Y32.31907
G01 X22.89977 Y32.24066
G01 X22.86045 Y32.20640
G01 X22.85250 Y32.19936
G01 X22.80769 Y32.15918
G01 X22.76799 Y32.12613
G01 X22.72890 Y32.09593
G01 X22.68750 Y32.05842
G01 X22.63883 Y32.00975
G01 X22.60129 Y31.96832
G01 X22.53952 Y31.88836
G01 X22.50012 Y31.83182
G01 X22.49446 Y31.82276
G01 X22.42682 Y31.69319
G01 X22.41161 Y31.66220
G01 X22.40043 Y31.62949
G01 X22.35664 Y31.49004
G01 X22.35425 Y31.47963
G01 X22.34214 Y31.41178
G01 X22.32926 Y31.31158
G01 X22.32652 Y31.25573
G01 X22.32652 Y31.18692
G01 X22.32926 Y31.13109
G01 X22.34214 Y31.03089
G01 X22.35425 Y30.96304
G01 X22.35664 Y30.95260
G01 X22.40043 Y30.81316
G01 X22.41161 Y30.78044
G01 X22.42682 Y30.74945
G01 X22.49438 Y30.61999
G01 X22.50015 Y30.61082
G01 X22.53952 Y30.55428
G01 X22.60132 Y30.47432
G01 X22.63883 Y30.43289
G01 X22.68750 Y30.38423
G01 X22.72890 Y30.34671
G01 X22.76799 Y30.31651
G01 X22.80769 Y30.28346
G01 X22.85245 Y30.24333
G01 X22.86050 Y30.23622
G01 X22.89969 Y30.20206
G01 X22.97810 Y30.12355
G01 X23.03957 Y30.05316
G01 X23.08537 Y29.99617
G01 X23.08537 Y29.99614
G01 X23.08686 Y29.98192
G01 X23.08686 Y29.92073
G01 X23.08537 Y29.90650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.20952 Y28.91499 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.20952 Y28.91499
G01 X21.85695 Y28.56244
G01 X21.86157 Y28.51535
G01 X21.86157 Y28.41928
G01 X21.85695 Y28.37224
G01 X22.06368 Y28.16554
G01 X22.08499 Y28.17501
G01 X22.18514 Y28.19630
G01 X22.24600 Y28.20270
G01 X22.28034 Y28.20300
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.45499 Y27.16046 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.45499 Y27.16046
G01 X20.47574 Y27.15733
G01 X20.67209 Y27.15733
G01 X20.69286 Y27.16046
G01 X20.66901 Y27.18431
G01 X20.62197 Y27.17966
G01 X20.52591 Y27.17966
G01 X20.47884 Y27.18431
G01 X20.45499 Y27.16046
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.83351 Y28.38009 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.83351 Y28.38009
G01 X18.83485 Y28.38093
G01 X18.85782 Y28.37973
G01 X18.91824 Y28.37013
G01 X19.01712 Y28.34364
G01 X19.10836 Y28.29716
G01 X19.14115 Y28.27062
G01 X19.16775 Y28.24910
G01 X19.29094 Y28.37229
G01 X19.28629 Y28.41928
G01 X19.28629 Y28.51535
G01 X19.29094 Y28.56241
G01 X18.95957 Y28.89375
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.45499 Y29.77419 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.45499 Y29.77419
G01 X20.47887 Y29.75032
G01 X20.52591 Y29.75494
G01 X20.62197 Y29.75494
G01 X20.66899 Y29.75032
G01 X20.69286 Y29.77419
G01 X20.67211 Y29.77732
G01 X20.47574 Y29.77732
G01 X20.45499 Y29.77419
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.03957 Y30.05316 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.03957 Y30.05316
G01 X23.08537 Y29.99614
G01 X23.08577 Y29.99566
G01 X23.17762 Y29.96779
G01 X23.26040 Y29.95133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.49141 Y29.95131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.49141 Y29.95131
G01 X24.57424 Y29.96779
G01 X24.72433 Y30.01331
G01 X24.81307 Y30.05006
G01 X24.95138 Y30.12400
G01 X25.03123 Y30.17737
G01 X25.15247 Y30.27686
G01 X25.22039 Y30.34478
G01 X25.29887 Y30.44041
G01 X25.31074 Y30.47353
G01 X25.33842 Y30.56454
G01 X25.37769 Y30.72136
G01 X25.39344 Y30.80035
G01 X25.41670 Y30.95720
G01 X25.42384 Y31.02949
G01 X25.43156 Y31.18631
G01 X25.43156 Y31.25634
G01 X25.42384 Y31.41318
G01 X25.41670 Y31.48549
G01 X25.39344 Y31.64231
G01 X25.37769 Y31.72128
G01 X25.33837 Y31.87808
G01 X25.28262 Y31.94605
G01 X25.17718 Y32.06238
G01 X25.11698 Y32.12258
G01 X25.00065 Y32.22801
G01 X24.93273 Y32.28371
G01 X24.80540 Y32.37818
G01 X24.73604 Y32.42448
G01 X24.72433 Y32.42931
G01 X24.57424 Y32.47485
G01 X24.49141 Y32.49131
G01 X23.26040 Y32.49133
G01 X23.17762 Y32.50779
G01 X23.08577 Y32.53566
G01 X23.08537 Y32.53614
G01 X23.03957 Y32.59316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.08537 Y32.44650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.08537 Y32.44650
G01 X23.08575 Y32.44696
G01 X23.17762 Y32.47485
G01 X23.26040 Y32.49133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.49141 Y32.49131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.49141 Y32.49131
G01 X24.57424 Y32.50779
G01 X24.63446 Y32.52606
G01 X24.73604 Y32.42448
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.29887 Y30.44041 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.29887 Y30.44041
G01 X25.29890 Y29.46221
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.87890 Y33.65824 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.87890 Y33.65824
G01 X29.57595 Y34.35529
G01 X29.61157 Y34.38757
G01 X29.66460 Y34.43111
G01 X29.74448 Y34.48447
G01 X29.80499 Y34.51681
G01 X29.89373 Y34.55359
G01 X29.95939 Y34.57350
G01 X30.05360 Y34.59224
G01 X30.11936 Y34.59872
G01 X30.15147 Y34.63786
G01 X30.21939 Y34.70578
G01 X30.34062 Y34.80527
G01 X30.42050 Y34.85864
G01 X30.55881 Y34.93255
G01 X30.64756 Y34.96931
G01 X30.79762 Y35.01485
G01 X30.88040 Y35.03133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.88040 Y32.49133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.88040 Y32.49133
G01 X30.79762 Y32.47485
G01 X30.64756 Y32.42931
G01 X30.55881 Y32.39255
G01 X30.42050 Y32.31864
G01 X30.34062 Y32.26527
G01 X30.21939 Y32.16578
G01 X30.15147 Y32.09786
G01 X30.05198 Y31.97663
G01 X29.99861 Y31.89675
G01 X29.92470 Y31.75844
G01 X29.88794 Y31.66970
G01 X29.84410 Y31.52522
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.84413 Y30.91725 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.84413 Y30.91725
G01 X29.84410 Y28.98522
G01 X29.88794 Y29.12972
G01 X29.92470 Y29.21844
G01 X29.99861 Y29.35675
G01 X30.05198 Y29.43663
G01 X30.15147 Y29.55786
G01 X30.21939 Y29.62578
G01 X30.34062 Y29.72527
G01 X30.42050 Y29.77864
G01 X30.55881 Y29.85255
G01 X30.64756 Y29.88931
G01 X30.79762 Y29.93485
G01 X30.88040 Y29.95133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.84410 Y28.98522 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.84410 Y28.98522
G01 X29.84324 Y28.97938
G01 X29.83387 Y28.88441
G01 X29.82617 Y28.72756
G01 X29.82617 Y28.63506
G01 X29.83387 Y28.47826
G01 X29.84324 Y28.38332
G01 X29.84413 Y28.37725
G01 X29.84413 Y27.88446
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.07291 Y27.94321 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.07291 Y27.94321
G01 X30.02833 Y27.96142
G01 X29.99861 Y28.00587
G01 X29.92470 Y28.14418
G01 X29.88794 Y28.23292
G01 X29.84413 Y28.37725
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.24888 Y26.26478 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.24888 Y26.26478
G01 X24.87304 Y24.88896
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.81198 Y27.20377 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.81198 Y27.20377
G01 X25.29892 Y27.69071
G01 X25.29887 Y27.90041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.55255 Y27.49935 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.55255 Y27.49935
G01 X24.69306 Y27.46384
G01 X24.72433 Y27.47331
G01 X24.81307 Y27.51006
G01 X24.95138 Y27.58403
G01 X25.03123 Y27.63737
G01 X25.15247 Y27.73689
G01 X25.22039 Y27.80481
G01 X25.29887 Y27.90041
G01 X25.31074 Y27.93353
G01 X25.33842 Y28.02454
G01 X25.37769 Y28.18136
G01 X25.39344 Y28.26035
G01 X25.41670 Y28.41720
G01 X25.42384 Y28.48949
G01 X25.43156 Y28.64633
G01 X25.43156 Y28.71634
G01 X25.42384 Y28.87318
G01 X25.41670 Y28.94549
G01 X25.39344 Y29.10231
G01 X25.37769 Y29.18128
G01 X25.33842 Y29.33810
G01 X25.31074 Y29.42911
G01 X25.29890 Y29.46221
G01 X25.22039 Y29.55786
G01 X25.15247 Y29.62578
G01 X25.03123 Y29.72527
G01 X24.95138 Y29.77864
G01 X24.81307 Y29.85255
G01 X24.72433 Y29.88931
G01 X24.57424 Y29.93485
G01 X24.49141 Y29.95131
G01 X23.26040 Y29.95133
G01 X23.17762 Y29.93485
G01 X23.08575 Y29.90696
G01 X23.08537 Y29.90650
G01 X23.03962 Y29.84958
G01 X22.97805 Y29.77907
G01 X22.89977 Y29.70066
G01 X22.86045 Y29.66640
G01 X22.85250 Y29.65936
G01 X22.80769 Y29.61918
G01 X22.76799 Y29.58613
G01 X22.72890 Y29.55593
G01 X22.68750 Y29.51842
G01 X22.63883 Y29.46975
G01 X22.60129 Y29.42832
G01 X22.53952 Y29.34836
G01 X22.50137 Y29.29380
G01 X22.50012 Y29.29185
G01 X22.43337 Y29.20234
G01 X22.40211 Y29.16642
G01 X22.39223 Y29.15484
G01 X22.35024 Y29.10473
G01 X22.26721 Y29.01773
G01 X22.24102 Y28.97399
G01 X22.20952 Y28.91499
G01 X22.20368 Y28.88542
G01 X22.18829 Y28.72934
G01 X22.18829 Y28.63328
G01 X22.20368 Y28.47722
G01 X22.22240 Y28.38301
G01 X22.26794 Y28.23292
G01 X22.28034 Y28.20300
G01 X22.34018 Y28.16312
G01 X22.47274 Y28.05616
G01 X22.47899 Y28.05002
G01 X22.52177 Y28.01093
G01 X22.52850 Y28.00526
G01 X22.59710 Y27.93897
G01 X22.63883 Y27.89294
G01 X22.68753 Y27.84423
G01 X22.72893 Y27.80669
G01 X22.80889 Y27.74494
G01 X22.86545 Y27.70552
G01 X22.87447 Y27.69990
G01 X23.00409 Y27.63221
G01 X23.03507 Y27.61700
G01 X23.06769 Y27.60587
G01 X23.20721 Y27.56203
G01 X23.21755 Y27.55967
G01 X23.28547 Y27.54755
G01 X23.38567 Y27.53465
G01 X23.44152 Y27.53191
G01 X23.47594 Y27.53110
G01 X24.25239 Y27.53110
G01 X24.27594 Y27.53066
G01 X24.31056 Y27.52952
G01 X24.36438 Y27.52569
G01 X24.42651 Y27.51898
G01 X24.46977 Y27.51304
G01 X24.55255 Y27.49935
G01 X24.69489 Y27.46335
G01 X24.70700 Y27.44992
G01 X24.74297 Y27.40041
G01 X24.79418 Y27.31174
G01 X24.81960 Y27.23346
G01 X24.78854 Y27.11245
G01 X24.76319 Y27.05121
G01 X24.65397 Y26.86275
G01 X24.62514 Y26.82619
G01 X24.57005 Y26.76417
G01 X22.68483 Y24.87895
G01 X22.61140 Y24.81505
G01 X22.60017 Y24.80656
G01 X22.58300 Y24.79315
G01 X22.55133 Y24.76768
G01 X22.52791 Y24.74959
G01 X22.46235 Y24.70088
G01 X22.39832 Y24.65731
G01 X22.32834 Y24.61368
G01 X22.30599 Y24.61487
G01 X22.24554 Y24.62445
G01 X22.15621 Y24.64741
G01 X22.07274 Y24.68668
G01 X22.06192 Y24.69310
G01 X22.05235 Y24.69915
G01 X22.03538 Y24.70994
G01 X21.99273 Y24.73900
G01 X21.81587 Y24.82419
G01 X21.62824 Y24.88208
G01 X21.43411 Y24.91131
G01 X21.23774 Y24.91131
G01 X21.21699 Y24.90822
G01 X21.24087 Y24.88434
G01 X21.28791 Y24.88896
G01 X21.38397 Y24.88896
G01 X21.54003 Y24.87357
G01 X21.63424 Y24.85485
G01 X21.78433 Y24.80931
G01 X21.87307 Y24.77255
G01 X22.01138 Y24.69864
G01 X22.09124 Y24.64530
G01 X22.21247 Y24.54578
G01 X22.28039 Y24.47786
G01 X22.28626 Y24.47070
G01 X22.29756 Y24.42978
G01 X22.31912 Y24.35869
G01 X22.33256 Y24.31779
G01 X22.33350 Y24.31513
G01 X22.35738 Y24.23618
G01 X22.39664 Y24.07936
G01 X22.41061 Y24.00931
G01 X22.43388 Y23.85249
G01 X22.44018 Y23.78886
G01 X22.44788 Y23.63204
G01 X22.44788 Y23.57060
G01 X22.44018 Y23.41378
G01 X22.43388 Y23.35018
G01 X22.41061 Y23.19333
G01 X22.39664 Y23.12328
G01 X22.38844 Y23.09054
G01 X22.31374 Y22.98980
G01 X22.26985 Y22.93631
G01 X22.16441 Y22.81998
G01 X22.11727 Y22.77284
G01 X22.00094 Y22.66740
G01 X21.94745 Y22.62354
G01 X21.82012 Y22.52910
G01 X21.75613 Y22.48638
G01 X21.61745 Y22.40324
G01 X21.53693 Y22.36029
G01 X21.47569 Y22.33133
G01 X21.38222 Y22.33131
G01 X21.23619 Y22.33131
G01 X21.13670 Y22.28427
G01 X21.05941 Y22.24302
G01 X20.92075 Y22.15991
G01 X20.86350 Y22.12199
G01 X20.85946 Y22.11902
G01 X20.82047 Y22.09245
G01 X20.79632 Y22.07708
G01 X20.75220 Y22.05125
G01 X20.72553 Y22.03690
G01 X20.70577 Y22.02585
G01 X20.66858 Y21.99811
G01 X20.55624 Y21.90832
G01 X20.54674 Y21.89933
G01 X20.49901 Y21.84960
G01 X20.42804 Y21.76796
G01 X20.39919 Y21.72864
G01 X20.36127 Y21.67124
G01 X20.32431 Y21.60886
G01 X20.32347 Y21.60716
G01 X20.28740 Y21.53289
G01 X20.26038 Y21.46951
G01 X20.24763 Y21.43499
G01 X20.21545 Y21.31927
G01 X20.20023 Y21.25196
G01 X20.20005 Y21.25087
G01 X20.18598 Y21.09578
G01 X20.18372 Y21.06133
G01 X20.18598 Y21.02687
G01 X20.20005 Y20.87177
G01 X20.20023 Y20.87071
G01 X20.21141 Y20.81854
G01 X20.21542 Y20.80340
G01 X20.24760 Y20.68770
G01 X20.26038 Y20.65313
G01 X20.28740 Y20.58976
G01 X20.32426 Y20.51384
G01 X20.36127 Y20.45140
G01 X20.39919 Y20.39400
G01 X20.42804 Y20.35468
G01 X20.49444 Y20.27830
G01 X20.49899 Y20.27302
G01 X20.54410 Y20.22009
G01 X20.56688 Y20.19199
G01 X20.60521 Y20.14224
G01 X20.64133 Y20.09133
G01 X20.68931 Y20.01785
G01 X20.71666 Y19.97348
G01 X21.95517 Y19.97348
G01 X21.98255 Y19.92910
G01 X22.03053 Y19.85562
G01 X22.06677 Y19.80452
G01 X22.10510 Y19.75481
G01 X22.12776 Y19.72687
G01 X22.17287 Y19.67394
G01 X22.17742 Y19.66865
G01 X22.24381 Y19.59227
G01 X22.27267 Y19.55296
G01 X22.31061 Y19.49550
G01 X22.34757 Y19.43312
G01 X22.38445 Y19.35715
G01 X22.41145 Y19.29388
G01 X22.42423 Y19.25926
G01 X22.45641 Y19.14361
G01 X22.47163 Y19.07625
G01 X22.47180 Y19.07516
G01 X22.48588 Y18.92009
G01 X22.48814 Y18.88562
G01 X22.48588 Y18.85118
G01 X22.47180 Y18.69609
G01 X22.47163 Y18.69499
G01 X22.45641 Y18.62763
G01 X22.42423 Y18.51199
G01 X22.41145 Y18.47739
G01 X22.38448 Y18.41412
G01 X22.34757 Y18.33815
G01 X22.31064 Y18.27577
G01 X22.27264 Y18.21826
G01 X22.24381 Y18.17899
G01 X22.17282 Y18.09733
G01 X22.12512 Y18.04762
G01 X22.11562 Y18.03866
G01 X22.00327 Y17.94884
G01 X21.96609 Y17.92108
G01 X21.94633 Y17.91006
G01 X21.80820 Y17.83576
G01 X21.79863 Y17.83071
G01 X21.74397 Y17.81049
G01 X21.61846 Y17.76993
G01 X21.59411 Y17.76424
G01 X21.52636 Y17.75184
G01 X21.43094 Y17.73919
G01 X21.37033 Y17.73622
G01 X21.30152 Y17.73622
G01 X21.24092 Y17.73919
G01 X21.14547 Y17.75184
G01 X21.07770 Y17.76424
G01 X21.05339 Y17.76993
G01 X20.92786 Y17.81049
G01 X20.87320 Y17.83071
G01 X20.86365 Y17.83576
G01 X20.72553 Y17.91006
G01 X20.70577 Y17.92108
G01 X20.66858 Y17.94884
G01 X20.55621 Y18.03866
G01 X20.54674 Y18.04760
G01 X20.49904 Y18.09733
G01 X20.42804 Y18.17899
G01 X20.39921 Y18.21826
G01 X20.36124 Y18.27572
G01 X20.32426 Y18.33815
G01 X20.28738 Y18.41410
G01 X20.26038 Y18.47744
G01 X20.24760 Y18.51199
G01 X20.21545 Y18.62768
G01 X20.20993 Y18.64869
G01 X20.20023 Y18.69499
G01 X20.20005 Y18.69609
G01 X20.18598 Y18.85118
G01 X20.18372 Y18.88562
G01 X20.18598 Y18.92009
G01 X20.20005 Y19.07518
G01 X20.20023 Y19.07625
G01 X20.21542 Y19.14356
G01 X20.24758 Y19.25915
G01 X20.26038 Y19.29380
G01 X20.28740 Y19.35720
G01 X20.32428 Y19.43312
G01 X20.36127 Y19.49555
G01 X20.39919 Y19.55296
G01 X20.42804 Y19.59227
G01 X20.49444 Y19.66865
G01 X20.49899 Y19.67394
G01 X20.52083 Y19.69956
G01 X20.53602 Y19.71681
G01 X20.54460 Y19.72626
G01 X20.63444 Y19.84767
G01 X20.64011 Y19.85710
G01 X20.66967 Y19.90297
G01 X20.68860 Y19.93042
G01 X20.71666 Y19.97348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.39917 Y19.97348 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.39917 Y19.97348
G01 X18.42655 Y19.92910
G01 X18.47453 Y19.85562
G01 X18.51077 Y19.80452
G01 X18.54910 Y19.75481
G01 X18.57176 Y19.72687
G01 X18.61687 Y19.67394
G01 X18.62142 Y19.66865
G01 X18.68781 Y19.59227
G01 X18.71667 Y19.55296
G01 X18.75461 Y19.49550
G01 X18.79157 Y19.43312
G01 X18.82845 Y19.35715
G01 X18.85545 Y19.29388
G01 X18.86823 Y19.25926
G01 X18.90041 Y19.14361
G01 X18.91563 Y19.07625
G01 X18.91580 Y19.07516
G01 X18.92987 Y18.92009
G01 X18.93214 Y18.88562
G01 X18.92987 Y18.85118
G01 X18.91580 Y18.69609
G01 X18.91563 Y18.69499
G01 X18.90041 Y18.62763
G01 X18.86823 Y18.51199
G01 X18.85545 Y18.47739
G01 X18.82848 Y18.41412
G01 X18.79157 Y18.33815
G01 X18.75464 Y18.27577
G01 X18.71664 Y18.21826
G01 X18.68781 Y18.17899
G01 X18.61682 Y18.09733
G01 X18.56912 Y18.04762
G01 X18.55962 Y18.03866
G01 X18.44727 Y17.94884
G01 X18.41009 Y17.92108
G01 X18.39033 Y17.91006
G01 X18.25220 Y17.83576
G01 X18.24263 Y17.83071
G01 X18.18797 Y17.81049
G01 X18.06246 Y17.76993
G01 X18.03811 Y17.76424
G01 X17.97036 Y17.75184
G01 X17.87494 Y17.73919
G01 X17.81433 Y17.73622
G01 X17.74552 Y17.73622
G01 X17.68489 Y17.73919
G01 X17.58947 Y17.75184
G01 X17.52170 Y17.76424
G01 X17.49739 Y17.76993
G01 X17.37186 Y17.81049
G01 X17.31720 Y17.83071
G01 X17.30765 Y17.83576
G01 X17.16953 Y17.91006
G01 X17.14977 Y17.92108
G01 X17.11256 Y17.94884
G01 X17.04697 Y18.00129
G01 X17.00016 Y18.03868
G01 X16.99071 Y18.04760
G01 X16.94301 Y18.09733
G01 X16.87204 Y18.17897
G01 X16.84319 Y18.21826
G01 X16.80524 Y18.27572
G01 X16.76823 Y18.33815
G01 X16.73135 Y18.41410
G01 X16.70438 Y18.47744
G01 X16.69160 Y18.51199
G01 X16.65945 Y18.62768
G01 X16.65393 Y18.64869
G01 X16.64423 Y18.69499
G01 X16.64403 Y18.69609
G01 X16.62998 Y18.85118
G01 X16.62772 Y18.88562
G01 X16.62998 Y18.92009
G01 X16.64403 Y19.07518
G01 X16.64423 Y19.07625
G01 X16.65942 Y19.14356
G01 X16.69158 Y19.25915
G01 X16.70438 Y19.29380
G01 X16.73140 Y19.35720
G01 X16.76828 Y19.43312
G01 X16.80527 Y19.49555
G01 X16.84319 Y19.55296
G01 X16.87204 Y19.59227
G01 X16.93841 Y19.66865
G01 X16.94299 Y19.67394
G01 X16.96503 Y19.69982
G01 X16.98020 Y19.71704
G01 X16.98860 Y19.72626
G01 X17.07834 Y19.84752
G01 X17.08408 Y19.85712
G01 X17.11357 Y19.90282
G01 X17.13257 Y19.93042
G01 X17.16066 Y19.97348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.64723 Y22.00606 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.64723 Y22.00606
G01 X15.40535 Y22.24795
G01 X15.37304 Y22.28356
G01 X15.32953 Y22.33662
G01 X15.27616 Y22.41648
G01 X15.24380 Y22.47698
G01 X15.20705 Y22.56573
G01 X15.18713 Y22.63138
G01 X15.16852 Y22.72503
G01 X15.16867 Y22.72559
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.29933 Y21.76956 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.29933 Y21.76956
G01 X15.26788 Y21.81663
G01 X15.16839 Y21.93786
G01 X15.10047 Y22.00578
G01 X14.97924 Y22.10527
G01 X14.89938 Y22.15864
G01 X14.76107 Y22.23255
G01 X14.67233 Y22.26931
G01 X14.52224 Y22.31485
G01 X14.43941 Y22.33131
G01 X14.12419 Y22.33131
G01 X14.02470 Y22.37838
G01 X13.94736 Y22.41965
G01 X13.80870 Y22.50278
G01 X13.74751 Y22.54363
G01 X13.62016 Y22.63804
G01 X13.56918 Y22.67987
G01 X13.50090 Y22.74175
G01 X13.47025 Y22.80657
G01 X13.44708 Y22.86235
G01 X13.39097 Y23.01917
G01 X13.37840 Y23.06047
G01 X13.33913 Y23.21729
G01 X13.33278 Y23.24906
G01 X13.30952 Y23.40591
G01 X13.30692 Y23.43222
G01 X13.29923 Y23.58904
G01 X13.29923 Y23.61360
G01 X13.30692 Y23.77045
G01 X13.30952 Y23.79676
G01 X13.33278 Y23.95358
G01 X13.33913 Y23.98536
G01 X13.37840 Y24.14218
G01 X13.39097 Y24.18348
G01 X13.44708 Y24.34030
G01 X13.47025 Y24.39608
G01 X13.54444 Y24.55292
G01 X13.58546 Y24.62943
G01 X13.66390 Y24.76031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.15930 Y24.48698 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.15930 Y24.48698
G01 X15.15932 Y25.03623
G01 X15.15932 Y26.76122
G01 X14.53936 Y27.38116
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.05237 Y27.70178 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.05237 Y27.70178
G01 X10.07884 Y27.72281
G01 X10.09154 Y27.73305
G01 X10.14280 Y27.77514
G01 X10.20637 Y27.82241
G01 X10.23822 Y27.84367
G01 X10.26992 Y27.86620
G01 X10.28976 Y27.88118
G01 X10.31734 Y27.90084
G01 X10.37696 Y27.94067
G01 X10.39817 Y27.95411
G01 X10.42641 Y27.97105
G01 X10.46477 Y27.99663
G01 X10.59210 Y28.09104
G01 X10.62273 Y28.11618
G01 X10.73909 Y28.22162
G01 X10.76563 Y28.24819
G01 X10.87106 Y28.36455
G01 X10.89621 Y28.39515
G01 X10.99065 Y28.52248
G01 X11.01623 Y28.56084
G01 X11.09936 Y28.69952
G01 X11.12666 Y28.75070
G01 X11.19789 Y28.90125
G01 X11.22722 Y28.97227
G01 X11.28567 Y29.13561
G01 X11.30634 Y29.20000
G01 X11.30205 Y29.23269
G01 X11.29852 Y29.25652
G01 X11.25994 Y29.38370
G01 X11.22318 Y29.47244
G01 X11.14925 Y29.61075
G01 X11.09588 Y29.69063
G01 X10.99639 Y29.81186
G01 X10.92847 Y29.87978
G01 X10.80723 Y29.97927
G01 X10.72738 Y30.03264
G01 X10.58907 Y30.10655
G01 X10.50033 Y30.14331
G01 X10.35024 Y30.18885
G01 X10.26741 Y30.20531
G01 X9.03640 Y30.20533
G01 X8.95362 Y30.22179
G01 X8.86177 Y30.24966
G01 X8.86137 Y30.25014
G01 X8.81557 Y30.30716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.03640 Y30.20533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.03640 Y30.20533
G01 X8.95362 Y30.18885
G01 X8.86175 Y30.16096
G01 X8.86137 Y30.16050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.03213 Y31.06573 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.03213 Y31.06573
G01 X7.99840 Y31.17701
G01 X7.97968 Y31.27122
G01 X7.96429 Y31.42728
G01 X7.96429 Y31.52334
G01 X7.97968 Y31.67942
G01 X7.99840 Y31.77363
G01 X8.02017 Y31.84541
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.86137 Y32.70050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.86137 Y32.70050
G01 X8.86175 Y32.70096
G01 X8.95362 Y32.72885
G01 X9.03640 Y32.74533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.26741 Y32.74533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.26741 Y32.74533
G01 X10.35024 Y32.72885
G01 X10.50033 Y32.68331
G01 X10.58907 Y32.64655
G01 X10.72738 Y32.57264
G01 X10.80723 Y32.51927
G01 X10.92847 Y32.41978
G01 X10.99639 Y32.35186
G01 X11.09588 Y32.23063
G01 X11.14925 Y32.15075
G01 X11.22318 Y32.01244
G01 X11.25994 Y31.92370
G01 X11.29852 Y31.79652
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.29852 Y31.15408 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.29852 Y31.15408
G01 X11.25994 Y31.02692
G01 X11.22318 Y30.93818
G01 X11.14925 Y30.79987
G01 X11.09588 Y30.72001
G01 X10.99639 Y30.59878
G01 X10.92847 Y30.53086
G01 X10.80723 Y30.43137
G01 X10.72738 Y30.37800
G01 X10.58907 Y30.30406
G01 X10.50033 Y30.26731
G01 X10.35024 Y30.22179
G01 X10.26741 Y30.20531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.29852 Y29.25652 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.29852 Y29.25652
G01 X11.29852 Y31.15408
G01 X11.30205 Y31.17800
G01 X11.31140 Y31.27252
G01 X11.31910 Y31.42931
G01 X11.31910 Y31.52131
G01 X11.31140 Y31.67815
G01 X11.30205 Y31.77267
G01 X11.29852 Y31.79652
G01 X11.29855 Y32.70477
G01 X10.93048 Y33.07284
G01 X10.92847 Y33.07086
G01 X10.80723 Y32.97137
G01 X10.72738 Y32.91800
G01 X10.58907 Y32.84406
G01 X10.50033 Y32.80731
G01 X10.35024 Y32.76179
G01 X10.26741 Y32.74533
G01 X9.03640 Y32.74533
G01 X8.95362 Y32.76179
G01 X8.86177 Y32.78966
G01 X8.86137 Y32.79014
G01 X8.81557 Y32.84716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.23099 Y32.73520 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.23099 Y32.73520
G01 X6.25487 Y32.71132
G01 X6.30191 Y32.71595
G01 X6.39797 Y32.71595
G01 X6.44499 Y32.71132
G01 X6.46886 Y32.73520
G01 X6.44811 Y32.73832
G01 X6.25174 Y32.73832
G01 X6.23099 Y32.73520
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.03625 Y31.42832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.03625 Y31.42832
G01 X5.04502 Y31.54529
G01 X5.06694 Y31.52337
G01 X5.06229 Y31.47635
G01 X5.06229 Y31.38029
G01 X5.06694 Y31.33327
G01 X5.04502 Y31.31138
G01 X5.03625 Y31.42832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.23099 Y30.12146 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.23099 Y30.12146
G01 X6.25484 Y30.14531
G01 X6.30191 Y30.14067
G01 X6.39797 Y30.14067
G01 X6.44501 Y30.14531
G01 X6.46886 Y30.12146
G01 X6.44809 Y30.11834
G01 X6.42700 Y30.11834
G01 X6.36996 Y30.12395
G01 X6.27392 Y30.12395
G01 X6.23795 Y30.12042
G01 X6.23099 Y30.12146
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.48667 Y23.54131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.48667 Y23.54131
G01 X4.48667 Y25.24136
G01 X4.48784 Y25.28198
G01 X4.48990 Y25.29950
G01 X4.51637 Y25.38558
G01 X4.56021 Y25.45813
G01 X4.62015 Y25.51804
G01 X4.69264 Y25.56188
G01 X4.77877 Y25.58838
G01 X4.79627 Y25.59041
G01 X4.83694 Y25.59160
G01 X6.53691 Y25.59160
G01 X6.57758 Y25.59041
G01 X6.59508 Y25.58838
G01 X6.68121 Y25.56188
G01 X6.75370 Y25.51804
G01 X6.81364 Y25.45813
G01 X6.85748 Y25.38558
G01 X6.88395 Y25.29950
G01 X6.88601 Y25.28198
G01 X6.88718 Y25.24136
G01 X6.88718 Y23.54131
G01 X6.88601 Y23.50067
G01 X6.88395 Y23.48317
G01 X6.85748 Y23.39704
G01 X6.81364 Y23.32455
G01 X6.75370 Y23.26461
G01 X6.68121 Y23.22077
G01 X6.59508 Y23.19430
G01 X6.57758 Y23.19224
G01 X6.53691 Y23.19107
G01 X4.83694 Y23.19107
G01 X4.79627 Y23.19224
G01 X4.77877 Y23.19430
G01 X4.69264 Y23.22077
G01 X4.62015 Y23.26461
G01 X4.56018 Y23.32455
G01 X4.51812 Y23.39371
G01 X4.51637 Y23.39704
G01 X4.48990 Y23.48317
G01 X4.48784 Y23.50067
G01 X4.48667 Y23.54131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.82311 Y22.37055 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.82311 Y22.37055
G01 X11.00083 Y22.54828
G01 X11.24152 Y23.12933
G01 X11.25077 Y23.15330
G01 X11.27533 Y23.22193
G01 X11.28783 Y23.26298
G01 X11.30500 Y23.33159
G01 X11.31214 Y23.36730
G01 X11.32230 Y23.43590
G01 X11.32552 Y23.46862
G01 X11.32890 Y23.53722
G01 X11.32931 Y23.55310
G01 X11.32931 Y27.21413
G01 X11.32969 Y27.23000
G01 X11.33307 Y27.29863
G01 X11.33484 Y27.32033
G01 X11.34046 Y27.33008
G01 X11.37683 Y27.39074
G01 X11.39283 Y27.41474
G01 X11.43413 Y27.47041
G01 X11.45039 Y27.49025
G01 X11.49651 Y27.54113
G01 X11.50497 Y27.55002
G01 X12.47439 Y28.51941
G01 X12.48287 Y28.52830
G01 X12.52900 Y28.57920
G01 X12.54525 Y28.59904
G01 X12.58656 Y28.65474
G01 X12.60256 Y28.67869
G01 X12.61569 Y28.70061
G01 X12.62219 Y28.74443
G01 X12.62501 Y28.77290
G01 X12.62839 Y28.84151
G01 X12.62872 Y28.85527
G01 X12.62872 Y33.05273
G01 X12.62839 Y33.06649
G01 X12.62501 Y33.13512
G01 X12.62219 Y33.16360
G01 X12.61203 Y33.23220
G01 X12.60576 Y33.26357
G01 X12.58859 Y33.33218
G01 X12.57749 Y33.36863
G01 X12.55295 Y33.43723
G01 X12.54462 Y33.45882
G01 X12.27891 Y34.10027
G01 X11.76989 Y34.60929
G01 X11.73426 Y34.64160
G01 X11.68122 Y34.68511
G01 X11.60137 Y34.73847
G01 X11.54086 Y34.77083
G01 X11.45211 Y34.80759
G01 X11.38646 Y34.82750
G01 X11.29225 Y34.84624
G01 X11.22395 Y34.85295
G01 X11.17594 Y34.85531
G01 X11.02639 Y34.85531
G01 X10.99639 Y34.89186
G01 X10.92847 Y34.95978
G01 X10.80723 Y35.05927
G01 X10.72738 Y35.11264
G01 X10.58907 Y35.18655
G01 X10.50033 Y35.22331
G01 X10.35024 Y35.26885
G01 X10.26741 Y35.28533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.61172 Y38.10143 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.61172 Y38.10143
G01 X13.85673 Y38.34644
G01 X15.19955 Y39.68929
G01 X15.23517 Y39.72157
G01 X15.28823 Y39.76511
G01 X15.36808 Y39.81847
G01 X15.42859 Y39.85083
G01 X15.51731 Y39.88759
G01 X15.58299 Y39.90750
G01 X15.67718 Y39.92624
G01 X15.74550 Y39.93295
G01 X15.79353 Y39.93531
G01 X15.89750 Y39.93531
G01 X15.92747 Y39.97186
G01 X15.99539 Y40.03978
G01 X16.11662 Y40.13927
G01 X16.19648 Y40.19264
G01 X16.33481 Y40.26655
G01 X16.42356 Y40.30331
G01 X16.57362 Y40.34885
G01 X16.65637 Y40.36533
G01 X17.88741 Y40.36531
G01 X17.97024 Y40.34885
G01 X18.12033 Y40.30331
G01 X18.20907 Y40.26655
G01 X18.33391 Y40.19983
G01 X18.34308 Y40.18454
G01 X18.39101 Y40.09515
G01 X18.46518 Y39.93831
G01 X18.49322 Y39.87080
G01 X18.54936 Y39.71395
G01 X18.56523 Y39.66170
G01 X18.60453 Y39.50488
G01 X18.61291 Y39.46275
G01 X18.63620 Y39.30593
G01 X18.63981 Y39.26945
G01 X18.64750 Y39.11261
G01 X18.64750 Y39.07804
G01 X18.63981 Y38.92122
G01 X18.63620 Y38.88477
G01 X18.61293 Y38.72790
G01 X18.60453 Y38.68576
G01 X18.56523 Y38.52894
G01 X18.54936 Y38.47669
G01 X18.49322 Y38.31985
G01 X18.46518 Y38.25233
G01 X18.39101 Y38.09549
G01 X18.34303 Y38.00603
G01 X18.33389 Y37.99079
G01 X18.20907 Y37.92406
G01 X18.12033 Y37.88731
G01 X17.97024 Y37.84179
G01 X17.88741 Y37.82531
G01 X16.65637 Y37.82531
G01 X16.57362 Y37.80885
G01 X16.42356 Y37.76331
G01 X16.33481 Y37.72655
G01 X16.19648 Y37.65264
G01 X16.11662 Y37.59927
G01 X15.99539 Y37.49978
G01 X15.92747 Y37.43186
G01 X15.82798 Y37.31063
G01 X15.77459 Y37.23075
G01 X15.70067 Y37.09244
G01 X15.66394 Y37.00370
G01 X15.61840 Y36.85363
G01 X15.59968 Y36.75942
G01 X15.58429 Y36.60334
G01 X15.58429 Y36.50728
G01 X15.59968 Y36.35122
G01 X15.61840 Y36.25701
G01 X15.66394 Y36.10692
G01 X15.70067 Y36.01818
G01 X15.77459 Y35.87987
G01 X15.82798 Y35.80001
G01 X15.92747 Y35.67878
G01 X15.99539 Y35.61086
G01 X16.09351 Y35.53032
G01 X16.11662 Y35.51137
G01 X16.19648 Y35.45800
G01 X16.33481 Y35.38406
G01 X16.42356 Y35.34731
G01 X16.57362 Y35.30179
G01 X16.65637 Y35.28533
G01 X17.88741 Y35.28533
G01 X17.97024 Y35.30179
G01 X18.06206 Y35.32963
G01 X18.10829 Y35.38714
G01 X18.16975 Y35.45755
G01 X18.24816 Y35.53606
G01 X18.28736 Y35.57022
G01 X18.29541 Y35.57733
G01 X18.34016 Y35.61746
G01 X18.37986 Y35.65051
G01 X18.41893 Y35.68069
G01 X18.46033 Y35.71823
G01 X18.47887 Y35.73565
G01 X18.51006 Y35.76606
G01 X18.56170 Y35.81177
G01 X18.61039 Y35.85094
G01 X18.63275 Y35.86824
G01 X18.66269 Y35.89059
G01 X18.71674 Y35.91106
G01 X18.79594 Y35.93786
G01 X18.85065 Y35.95450
G01 X18.86734 Y35.95902
G01 X18.91547 Y35.97337
G01 X18.95177 Y35.98114
G01 X19.01712 Y35.96364
G01 X19.10836 Y35.91716
G01 X19.16775 Y35.86910
G01 X19.29094 Y35.99227
G01 X19.28629 Y36.03928
G01 X19.28629 Y36.13535
G01 X19.30168 Y36.29140
G01 X19.31258 Y36.34645
G01 X19.33168 Y36.38221
G01 X19.41476 Y36.52087
G01 X19.46256 Y36.59247
G01 X19.55703 Y36.71983
G01 X19.60635 Y36.77995
G01 X19.69353 Y36.87614
G01 X19.71141 Y36.89661
G01 X19.71819 Y36.90464
G01 X19.76233 Y36.95267
G01 X19.76482 Y36.95513
G01 X19.81725 Y37.01302
G01 X19.86162 Y37.06709
G01 X19.86645 Y37.07301
G01 X19.91616 Y37.13476
G01 X19.92157 Y37.14139
G01 X19.96325 Y37.19216
G01 X19.99634 Y37.23694
G01 X20.00485 Y37.27941
G01 X20.01156 Y37.34771
G01 X20.01392 Y37.39572
G01 X20.01392 Y37.47885
G01 X19.96416 Y37.57324
G01 X19.93909 Y37.63440
G01 X19.88423 Y37.84289
G01 X19.87892 Y37.88840
G01 X19.87417 Y37.97001
G01 X19.87417 Y39.50750
G01 X19.88296 Y39.61840
G01 X19.89264 Y39.67959
G01 X19.97702 Y39.93226
G01 X19.99289 Y39.96340
G01 X19.93549 Y40.05916
G01 X19.89444 Y40.13572
G01 X19.82025 Y40.29256
G01 X19.79708 Y40.34834
G01 X19.74097 Y40.50516
G01 X19.72840 Y40.54646
G01 X19.68913 Y40.70328
G01 X19.68278 Y40.73506
G01 X19.65952 Y40.89190
G01 X19.65692 Y40.91822
G01 X19.64923 Y41.07504
G01 X19.64923 Y41.09960
G01 X19.65692 Y41.25644
G01 X19.65952 Y41.28276
G01 X19.68278 Y41.43958
G01 X19.68913 Y41.47135
G01 X19.72840 Y41.62820
G01 X19.74097 Y41.66950
G01 X19.79708 Y41.82632
G01 X19.82025 Y41.88207
G01 X19.89444 Y42.03892
G01 X19.91849 Y42.08593
G01 X19.94168 Y42.10379
G01 X20.06901 Y42.19822
G01 X20.14054 Y42.24598
G01 X20.27920 Y42.32908
G01 X20.31646 Y42.34897
G01 X20.36983 Y42.35959
G01 X20.52591 Y42.37496
G01 X20.62197 Y42.37496
G01 X20.77803 Y42.35959
G01 X20.87224 Y42.34084
G01 X20.90587 Y42.33063
G01 X21.02233 Y42.29533
G01 X21.11107 Y42.25855
G01 X21.24938 Y42.18464
G01 X21.32924 Y42.13127
G01 X21.45047 Y42.03178
G01 X21.51839 Y41.96386
G01 X21.61788 Y41.84262
G01 X21.67125 Y41.76274
G01 X21.74519 Y41.62444
G01 X21.78194 Y41.53569
G01 X21.82746 Y41.38563
G01 X21.84620 Y41.29142
G01 X21.86157 Y41.13534
G01 X21.86157 Y41.10640
G01 X21.85204 Y41.09147
G01 X21.81984 Y41.04341
G01 X21.73835 Y40.89386
G01 X21.71740 Y40.84428
G01 X21.70975 Y40.82680
G01 X21.70881 Y40.82497
G01 X21.66853 Y40.73074
G01 X21.64945 Y40.67908
G01 X21.62245 Y40.61580
G01 X21.58557 Y40.53983
G01 X21.54861 Y40.47745
G01 X21.51067 Y40.42000
G01 X21.48184 Y40.38070
G01 X21.41085 Y40.29904
G01 X21.36309 Y40.24931
G01 X21.35362 Y40.24034
G01 X21.24128 Y40.15055
G01 X21.20409 Y40.12276
G01 X21.18428 Y40.11172
G01 X21.04618 Y40.03745
G01 X21.03665 Y40.03242
G01 X20.98204 Y40.01222
G01 X20.85646 Y39.97163
G01 X20.83216 Y39.96595
G01 X20.76436 Y39.95355
G01 X20.66894 Y39.94090
G01 X20.60833 Y39.93793
G01 X20.53952 Y39.93793
G01 X20.47889 Y39.94090
G01 X20.39746 Y39.95167
G01 X20.38347 Y39.95340
G01 X20.31420 Y39.96114
G01 X20.26574 Y39.96653
G01 X20.15322 Y39.97069
G01 X20.06442 Y39.96770
G01 X20.02825 Y39.96584
G01 X19.99289 Y39.96340
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.65637 Y42.90533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.65637 Y42.90533
G01 X16.57362 Y42.88885
G01 X16.42356 Y42.84331
G01 X16.33481 Y42.80655
G01 X16.19648 Y42.73264
G01 X16.11662 Y42.67927
G01 X15.99539 Y42.57978
G01 X15.92747 Y42.51186
G01 X15.82798 Y42.39063
G01 X15.77459 Y42.31075
G01 X15.70067 Y42.17244
G01 X15.66394 Y42.08370
G01 X15.61840 Y41.93363
G01 X15.59968 Y41.83942
G01 X15.58429 Y41.68334
G01 X15.58429 Y41.58728
G01 X15.59968 Y41.43122
G01 X15.61840 Y41.33701
G01 X15.66394 Y41.18692
G01 X15.70067 Y41.09818
G01 X15.77459 Y40.95987
G01 X15.82798 Y40.88001
G01 X15.92747 Y40.75878
G01 X15.99539 Y40.69086
G01 X16.09351 Y40.61032
G01 X16.11662 Y40.59137
G01 X16.19648 Y40.53800
G01 X16.33481 Y40.46406
G01 X16.42356 Y40.42731
G01 X16.57362 Y40.38179
G01 X16.65637 Y40.36533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.33389 Y40.53079 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.33389 Y40.53079
G01 X18.33391 Y40.19983
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.88741 Y40.36531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.88741 Y40.36531
G01 X17.97024 Y40.38179
G01 X18.12033 Y40.42731
G01 X18.20907 Y40.46406
G01 X18.33389 Y40.53079
G01 X18.34303 Y40.54603
G01 X18.39101 Y40.63549
G01 X18.46518 Y40.79233
G01 X18.49322 Y40.85985
G01 X18.54936 Y41.01669
G01 X18.56523 Y41.06894
G01 X18.60453 Y41.22576
G01 X18.61293 Y41.26790
G01 X18.63620 Y41.42477
G01 X18.63981 Y41.46122
G01 X18.64750 Y41.61804
G01 X18.64750 Y41.65261
G01 X18.63981 Y41.80945
G01 X18.63620 Y41.84593
G01 X18.61291 Y42.00275
G01 X18.60453 Y42.04488
G01 X18.56523 Y42.20170
G01 X18.54936 Y42.25395
G01 X18.49912 Y42.39431
G01 X18.49343 Y42.41092
G01 X18.48797 Y42.42743
G01 X18.46785 Y42.48154
G01 X18.46056 Y42.49909
G01 X18.43031 Y42.58405
G01 X18.40839 Y42.65631
G01 X18.40633 Y42.66302
G01 X18.39444 Y42.70135
G01 X18.34738 Y42.73264
G01 X18.20907 Y42.80655
G01 X18.12033 Y42.84331
G01 X17.97024 Y42.88885
G01 X17.88741 Y42.90531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.92805 Y43.88997 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.92805 Y43.88997
G01 X18.95568 Y43.86731
G01 X19.03554 Y43.81394
G01 X19.17387 Y43.74003
G01 X19.26259 Y43.70325
G01 X19.28738 Y43.69573
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.39444 Y42.70135 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.39444 Y42.70135
G01 X18.41842 Y42.75926
G01 X18.45078 Y42.81976
G01 X18.50415 Y42.89962
G01 X18.54766 Y42.95265
G01 X18.57996 Y42.98829
G01 X19.28738 Y43.69573
G01 X19.43549 Y43.73284
G01 X19.51855 Y43.75791
G01 X19.68187 Y43.81636
G01 X19.73777 Y43.83944
G01 X19.88834 Y43.91067
G01 X19.92639 Y43.93099
G01 X20.06505 Y44.01407
G01 X20.09200 Y44.03205
G01 X20.21936 Y44.12652
G01 X20.23980 Y44.14328
G01 X20.35614 Y44.24872
G01 X20.37353 Y44.26611
G01 X20.47897 Y44.38245
G01 X20.49573 Y44.40289
G01 X20.59020 Y44.53025
G01 X20.60818 Y44.55720
G01 X20.69126 Y44.69586
G01 X20.71158 Y44.73391
G01 X20.78280 Y44.88448
G01 X20.80589 Y44.94038
G01 X20.86434 Y45.10370
G01 X20.88941 Y45.18676
G01 X20.91682 Y45.29616
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.55351 Y49.14096 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.55351 Y49.14096
G01 X23.55351 Y49.14098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.61813 Y49.10578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.61813 Y49.10578
G01 X23.57104 Y49.14007
G01 X23.57023 Y49.14068
G01 X23.56192 Y49.16062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.49446 Y49.10078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.49446 Y49.10078
G01 X23.55351 Y49.14096
G01 X23.57106 Y49.14007
G01 X23.61813 Y49.10578
G01 X23.62692 Y49.09945
G01 X23.67378 Y49.06610
G01 X23.77002 Y48.98698
G01 X23.82090 Y48.93844
G01 X23.82410 Y48.93542
G01 X23.84363 Y48.91701
G01 X23.88310 Y48.87675
G01 X23.93949 Y48.81454
G01 X23.98813 Y48.76590
G01 X24.03246 Y48.72572
G01 X24.11709 Y48.66034
G01 X24.17368 Y48.62092
G01 X24.18437 Y48.61421
G01 X24.26789 Y48.57063
G01 X24.32092 Y48.54294
G01 X24.35189 Y48.52773
G01 X24.38455 Y48.51660
G01 X24.53154 Y48.47042
G01 X24.54383 Y48.46760
G01 X24.61170 Y48.45546
G01 X24.71775 Y48.44185
G01 X24.77751 Y48.43893
G01 X24.84632 Y48.43893
G01 X24.90611 Y48.44185
G01 X25.01213 Y48.45546
G01 X25.08003 Y48.46760
G01 X25.09230 Y48.47042
G01 X25.23931 Y48.51660
G01 X25.27198 Y48.52773
G01 X25.30294 Y48.54297
G01 X25.43949 Y48.61421
G01 X25.45018 Y48.62092
G01 X25.50677 Y48.66034
G01 X25.59138 Y48.72572
G01 X25.63570 Y48.76590
G01 X25.68434 Y48.81454
G01 X25.74076 Y48.87677
G01 X25.80012 Y48.93509
G01 X25.82364 Y48.95567
G01 X25.85610 Y48.98576
G01 X25.87002 Y48.99943
G01 X25.99445 Y49.10078
G01 X26.05351 Y49.14098
G01 X26.05389 Y49.14124
G01 X26.06192 Y49.16059
G01 X26.06192 Y50.36592
G01 X26.05364 Y50.38599
G01 X26.05280 Y50.38657
G01 X26.05280 Y50.38660
G01 X26.00593 Y50.42071
G01 X25.99689 Y50.42724
G01 X25.95023 Y50.46041
G01 X25.85381 Y50.53969
G01 X25.80281 Y50.58833
G01 X25.79974 Y50.59125
G01 X25.78010 Y50.60976
G01 X25.74076 Y50.64990
G01 X25.68434 Y50.71210
G01 X25.63570 Y50.76074
G01 X25.59136 Y50.80095
G01 X25.52587 Y50.85152
G01 X25.50677 Y50.86630
G01 X25.45023 Y50.90570
G01 X25.43951 Y50.91241
G01 X25.30299 Y50.98368
G01 X25.27195 Y50.99892
G01 X25.23926 Y51.01009
G01 X25.09230 Y51.05625
G01 X25.07998 Y51.05906
G01 X25.01213 Y51.07118
G01 X24.90609 Y51.08479
G01 X24.84632 Y51.08774
G01 X24.77751 Y51.08774
G01 X24.71775 Y51.08479
G01 X24.61170 Y51.07118
G01 X24.54388 Y51.05906
G01 X24.53154 Y51.05625
G01 X24.38460 Y51.01009
G01 X24.35191 Y50.99892
G01 X24.32090 Y50.98370
G01 X24.18435 Y50.91243
G01 X24.17363 Y50.90570
G01 X24.11709 Y50.86630
G01 X24.03240 Y50.80090
G01 X23.98813 Y50.76074
G01 X23.93949 Y50.71210
G01 X23.88313 Y50.64992
G01 X23.82372 Y50.59155
G01 X23.80005 Y50.57083
G01 X23.76774 Y50.54090
G01 X23.75367 Y50.52709
G01 X23.62941 Y50.42592
G01 X23.57033 Y50.38569
G01 X23.55280 Y50.38657
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.57030 Y50.38569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.57030 Y50.38569
G01 X23.57002 Y50.38548
G01 X23.56192 Y50.36592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.11814 Y49.10578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.11814 Y49.10578
G01 X21.07102 Y49.14007
G01 X21.07021 Y49.14068
G01 X21.06193 Y49.16062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.05352 Y49.14098 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.05352 Y49.14098
G01 X21.05352 Y49.14096
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.99446 Y49.10078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.99446 Y49.10078
G01 X21.05352 Y49.14096
G01 X21.07104 Y49.14007
G01 X21.11814 Y49.10578
G01 X21.12692 Y49.09945
G01 X21.17379 Y49.06610
G01 X21.27003 Y48.98698
G01 X21.32103 Y48.93832
G01 X21.32410 Y48.93540
G01 X21.34374 Y48.91688
G01 X21.38308 Y48.87677
G01 X21.43950 Y48.81454
G01 X21.48814 Y48.76590
G01 X21.53246 Y48.72572
G01 X21.61709 Y48.66034
G01 X21.63208 Y48.64909
G01 X21.67366 Y48.62092
G01 X21.68435 Y48.61421
G01 X21.82093 Y48.54294
G01 X21.85189 Y48.52773
G01 X21.88456 Y48.51660
G01 X22.03155 Y48.47042
G01 X22.04379 Y48.46760
G01 X22.11171 Y48.45546
G01 X22.21775 Y48.44185
G01 X22.27752 Y48.43893
G01 X22.34633 Y48.43893
G01 X22.40609 Y48.44185
G01 X22.51214 Y48.45546
G01 X22.58006 Y48.46760
G01 X22.59233 Y48.47042
G01 X22.73929 Y48.51660
G01 X22.77196 Y48.52775
G01 X22.80292 Y48.54294
G01 X22.93949 Y48.61421
G01 X22.95019 Y48.62092
G01 X23.00678 Y48.66034
G01 X23.09139 Y48.72572
G01 X23.13571 Y48.76590
G01 X23.18435 Y48.81454
G01 X23.24076 Y48.87677
G01 X23.30012 Y48.93509
G01 X23.32364 Y48.95567
G01 X23.35610 Y48.98576
G01 X23.37002 Y48.99943
G01 X23.49446 Y49.10078
G01 X23.55351 Y49.14098
G01 X23.55389 Y49.14124
G01 X23.56192 Y49.16062
G01 X23.56192 Y49.34614
G01 X23.56195 Y49.43148
G01 X23.56195 Y50.09516
G01 X23.56192 Y50.18048
G01 X23.56192 Y50.36592
G01 X23.55364 Y50.38599
G01 X23.55280 Y50.38657
G01 X23.55280 Y50.38660
G01 X23.50589 Y50.42076
G01 X23.49687 Y50.42724
G01 X23.45021 Y50.46044
G01 X23.35382 Y50.53969
G01 X23.30282 Y50.58833
G01 X23.29974 Y50.59125
G01 X23.28011 Y50.60976
G01 X23.24076 Y50.64990
G01 X23.18435 Y50.71210
G01 X23.13571 Y50.76074
G01 X23.09136 Y50.80095
G01 X23.02588 Y50.85152
G01 X23.00678 Y50.86630
G01 X22.95021 Y50.90570
G01 X22.93952 Y50.91241
G01 X22.80294 Y50.98370
G01 X22.77196 Y50.99892
G01 X22.73924 Y51.01009
G01 X22.59230 Y51.05625
G01 X22.58001 Y51.05906
G01 X22.51214 Y51.07118
G01 X22.40609 Y51.08479
G01 X22.34633 Y51.08774
G01 X22.27752 Y51.08774
G01 X22.21775 Y51.08479
G01 X22.11171 Y51.07118
G01 X22.04384 Y51.05906
G01 X22.03155 Y51.05625
G01 X21.88461 Y51.01009
G01 X21.85192 Y50.99892
G01 X21.82090 Y50.98370
G01 X21.68433 Y50.91243
G01 X21.67363 Y50.90570
G01 X21.61707 Y50.86630
G01 X21.53241 Y50.80087
G01 X21.48814 Y50.76074
G01 X21.43950 Y50.71210
G01 X21.38308 Y50.64990
G01 X21.32372 Y50.59155
G01 X21.30008 Y50.57088
G01 X21.26774 Y50.54090
G01 X21.25372 Y50.52714
G01 X21.12941 Y50.42592
G01 X21.07033 Y50.38569
G01 X21.05281 Y50.38657
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.07031 Y50.38569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.07031 Y50.38569
G01 X21.07003 Y50.38548
G01 X21.06193 Y50.36595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.61814 Y49.10578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.61814 Y49.10578
G01 X18.57102 Y49.14007
G01 X18.57021 Y49.14068
G01 X18.56193 Y49.16064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.55352 Y49.14098 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.55352 Y49.14098
G01 X18.55352 Y49.14096
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.49442 Y49.10072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.49442 Y49.10072
G01 X18.55352 Y49.14096
G01 X18.57105 Y49.14007
G01 X18.61814 Y49.10578
G01 X18.62693 Y49.09945
G01 X18.67379 Y49.06610
G01 X18.77003 Y48.98698
G01 X18.82104 Y48.93832
G01 X18.82411 Y48.93540
G01 X18.84374 Y48.91688
G01 X18.88309 Y48.87677
G01 X18.93950 Y48.81454
G01 X18.98814 Y48.76590
G01 X19.03249 Y48.72572
G01 X19.11707 Y48.66034
G01 X19.13208 Y48.64909
G01 X19.17366 Y48.62092
G01 X19.18433 Y48.61424
G01 X19.26790 Y48.57063
G01 X19.32093 Y48.54294
G01 X19.35190 Y48.52773
G01 X19.38456 Y48.51660
G01 X19.53152 Y48.47042
G01 X19.54379 Y48.46760
G01 X19.61171 Y48.45546
G01 X19.71776 Y48.44185
G01 X19.77752 Y48.43893
G01 X19.84633 Y48.43893
G01 X19.90610 Y48.44185
G01 X20.01214 Y48.45546
G01 X20.08001 Y48.46760
G01 X20.09231 Y48.47042
G01 X20.23930 Y48.51660
G01 X20.27196 Y48.52773
G01 X20.30292 Y48.54294
G01 X20.43950 Y48.61421
G01 X20.45019 Y48.62092
G01 X20.50678 Y48.66034
G01 X20.59137 Y48.72572
G01 X20.63571 Y48.76590
G01 X20.68435 Y48.81454
G01 X20.74074 Y48.87675
G01 X20.80013 Y48.93509
G01 X20.82370 Y48.95572
G01 X20.85611 Y48.98576
G01 X20.87008 Y48.99948
G01 X20.99446 Y49.10078
G01 X21.05352 Y49.14098
G01 X21.05390 Y49.14124
G01 X21.06193 Y49.16062
G01 X21.06193 Y50.36595
G01 X21.05365 Y50.38599
G01 X21.05281 Y50.38657
G01 X21.05281 Y50.38660
G01 X21.00589 Y50.42076
G01 X20.99688 Y50.42724
G01 X20.95022 Y50.46044
G01 X20.85382 Y50.53969
G01 X20.80282 Y50.58833
G01 X20.79975 Y50.59125
G01 X20.78011 Y50.60976
G01 X20.74077 Y50.64990
G01 X20.68435 Y50.71210
G01 X20.63571 Y50.76074
G01 X20.59137 Y50.80095
G01 X20.52591 Y50.85152
G01 X20.50678 Y50.86630
G01 X20.45022 Y50.90570
G01 X20.43952 Y50.91241
G01 X20.30295 Y50.98370
G01 X20.27193 Y50.99892
G01 X20.23924 Y51.01009
G01 X20.09231 Y51.05625
G01 X20.07996 Y51.05906
G01 X20.01214 Y51.07118
G01 X19.90610 Y51.08479
G01 X19.84633 Y51.08774
G01 X19.77752 Y51.08774
G01 X19.71776 Y51.08479
G01 X19.61171 Y51.07118
G01 X19.54384 Y51.05906
G01 X19.53155 Y51.05625
G01 X19.38461 Y51.01009
G01 X19.35190 Y50.99892
G01 X19.32091 Y50.98370
G01 X19.18436 Y50.91243
G01 X19.17364 Y50.90570
G01 X19.11707 Y50.86630
G01 X19.03241 Y50.80087
G01 X18.98814 Y50.76074
G01 X18.93950 Y50.71210
G01 X18.88309 Y50.64990
G01 X18.82373 Y50.59155
G01 X18.80008 Y50.57088
G01 X18.76775 Y50.54090
G01 X18.75373 Y50.52714
G01 X18.62942 Y50.42592
G01 X18.57034 Y50.38569
G01 X18.57001 Y50.38546
G01 X18.56193 Y50.36595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.57034 Y50.38569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.57034 Y50.38569
G01 X18.55281 Y50.38657
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.82466 Y55.44427 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.82466 Y55.44427
G01 X20.79441 Y55.54399
G01 X20.77793 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.73122 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.73122 Y55.44435
G01 X20.76147 Y55.54399
G01 X20.77793 Y55.62670
G01 X20.77793 Y56.05771
G01 X20.76147 Y56.14061
G01 X20.73114 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.82464 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.82464 Y56.24031
G01 X20.79441 Y56.14061
G01 X20.77793 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.23793 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.23793 Y55.62670
G01 X18.25441 Y55.54399
G01 X18.28466 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.19122 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.19122 Y55.44435
G01 X18.22147 Y55.54399
G01 X18.23793 Y55.62670
G01 X18.23793 Y56.05771
G01 X18.22147 Y56.14061
G01 X18.19114 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.28464 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.28464 Y56.24031
G01 X18.25441 Y56.14061
G01 X18.23793 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.69790 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.69790 Y55.62670
G01 X15.71439 Y55.54399
G01 X15.74464 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.65119 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.65119 Y55.44435
G01 X15.68147 Y55.54399
G01 X15.69790 Y55.62670
G01 X15.69790 Y56.05771
G01 X15.68147 Y56.14061
G01 X15.65112 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.74464 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.74464 Y56.24031
G01 X15.71439 Y56.14061
G01 X15.69790 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.15790 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.15790 Y55.62670
G01 X13.17441 Y55.54399
G01 X13.20466 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.65760 Y50.56262 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.65760 Y50.56262
G01 X13.64863 Y50.54583
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.64680 Y50.56435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.64680 Y50.56435
G01 X13.64863 Y50.54583
G01 X13.64667 Y50.53600
G01 X13.63596 Y50.48830
G01 X13.62143 Y50.43026
G01 X13.60377 Y50.34184
G01 X13.57906 Y50.17522
G01 X13.57108 Y50.09425
G01 X13.56291 Y49.92762
G01 X13.56192 Y49.88830
G01 X13.56192 Y49.63834
G01 X13.56291 Y49.59902
G01 X13.57108 Y49.43240
G01 X13.57909 Y49.35140
G01 X13.60377 Y49.18480
G01 X13.62140 Y49.09643
G01 X13.63596 Y49.03834
G01 X13.64667 Y48.99062
G01 X13.64863 Y48.98074
G01 X13.64723 Y48.96641
G01 X13.64599 Y48.96511
G01 X13.65864 Y48.96572
G01 X13.65869 Y48.96575
G01 X13.69400 Y48.94629
G01 X13.73240 Y48.92404
G01 X13.77919 Y48.89859
G01 X13.79191 Y48.89214
G01 X13.92841 Y48.80550
G01 X13.96463 Y48.77693
G01 X13.97332 Y48.77019
G01 X13.98493 Y48.76194
G01 X14.01894 Y48.73616
G01 X14.11711 Y48.66031
G01 X14.17367 Y48.62092
G01 X14.18437 Y48.61421
G01 X14.26788 Y48.57063
G01 X14.32089 Y48.54294
G01 X14.35188 Y48.52773
G01 X14.38454 Y48.51660
G01 X14.53153 Y48.47042
G01 X14.54383 Y48.46760
G01 X14.61170 Y48.45546
G01 X14.71774 Y48.44185
G01 X14.77751 Y48.43893
G01 X14.84632 Y48.43893
G01 X14.90611 Y48.44185
G01 X15.01213 Y48.45546
G01 X15.08002 Y48.46760
G01 X15.09232 Y48.47042
G01 X15.23931 Y48.51660
G01 X15.27194 Y48.52773
G01 X15.30293 Y48.54297
G01 X15.43948 Y48.61421
G01 X15.45018 Y48.62092
G01 X15.50674 Y48.66034
G01 X15.59138 Y48.72572
G01 X15.63570 Y48.76590
G01 X15.68434 Y48.81454
G01 X15.74070 Y48.87672
G01 X15.80009 Y48.93509
G01 X15.82366 Y48.95572
G01 X15.85607 Y48.98574
G01 X15.87006 Y48.99948
G01 X15.99442 Y49.10072
G01 X16.05353 Y49.14098
G01 X16.05388 Y49.14124
G01 X16.06194 Y49.16062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.05353 Y49.14098 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.05353 Y49.14098
G01 X16.07098 Y49.14007
G01 X16.07105 Y49.14007
G01 X16.11809 Y49.10580
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.06194 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.06194 Y50.36592
G01 X16.05363 Y50.38599
G01 X16.00590 Y50.42076
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.07029 Y50.38569 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.07029 Y50.38569
G01 X16.07001 Y50.38548
G01 X16.06194 Y50.36592
G01 X16.06194 Y49.16062
G01 X16.07019 Y49.14065
G01 X16.07098 Y49.14007
G01 X16.11809 Y49.10580
G01 X16.12698 Y49.09943
G01 X16.17377 Y49.06610
G01 X16.27006 Y48.98696
G01 X16.32117 Y48.93819
G01 X16.32411 Y48.93540
G01 X16.34388 Y48.91678
G01 X16.38304 Y48.87680
G01 X16.43951 Y48.81454
G01 X16.48812 Y48.76590
G01 X16.53247 Y48.72572
G01 X16.61708 Y48.66034
G01 X16.63209 Y48.64909
G01 X16.67364 Y48.62092
G01 X16.68434 Y48.61424
G01 X16.82091 Y48.54297
G01 X16.85190 Y48.52773
G01 X16.88451 Y48.51660
G01 X17.03150 Y48.47042
G01 X17.04382 Y48.46758
G01 X17.11172 Y48.45546
G01 X17.21771 Y48.44185
G01 X17.27750 Y48.43893
G01 X17.34634 Y48.43893
G01 X17.40610 Y48.44185
G01 X17.51215 Y48.45546
G01 X17.58002 Y48.46760
G01 X17.59231 Y48.47042
G01 X17.73928 Y48.51660
G01 X17.77194 Y48.52773
G01 X17.80293 Y48.54294
G01 X17.93950 Y48.61421
G01 X17.95017 Y48.62092
G01 X18.00676 Y48.66034
G01 X18.09140 Y48.72572
G01 X18.13572 Y48.76590
G01 X18.18438 Y48.81457
G01 X18.24075 Y48.87675
G01 X18.30016 Y48.93512
G01 X18.32368 Y48.95572
G01 X18.35606 Y48.98574
G01 X18.37008 Y48.99948
G01 X18.49442 Y49.10072
G01 X18.55352 Y49.14098
G01 X18.55390 Y49.14124
G01 X18.56193 Y49.16064
G01 X18.56193 Y50.36595
G01 X18.55365 Y50.38599
G01 X18.55281 Y50.38657
G01 X18.55281 Y50.38660
G01 X18.50590 Y50.42076
G01 X18.49683 Y50.42727
G01 X18.45022 Y50.46044
G01 X18.35375 Y50.53971
G01 X18.30293 Y50.58820
G01 X18.29978 Y50.59122
G01 X18.28022 Y50.60964
G01 X18.24072 Y50.64990
G01 X18.18438 Y50.71208
G01 X18.13572 Y50.76074
G01 X18.09137 Y50.80095
G01 X18.02591 Y50.85152
G01 X18.00679 Y50.86630
G01 X17.95022 Y50.90570
G01 X17.93953 Y50.91241
G01 X17.80295 Y50.98370
G01 X17.77194 Y50.99892
G01 X17.73925 Y51.01009
G01 X17.59231 Y51.05625
G01 X17.57997 Y51.05906
G01 X17.51215 Y51.07118
G01 X17.40610 Y51.08479
G01 X17.34634 Y51.08774
G01 X17.27750 Y51.08774
G01 X17.21771 Y51.08479
G01 X17.11172 Y51.07118
G01 X17.04387 Y51.05906
G01 X17.03153 Y51.05625
G01 X16.88459 Y51.01009
G01 X16.85190 Y50.99894
G01 X16.82084 Y50.98368
G01 X16.68434 Y50.91241
G01 X16.67362 Y50.90570
G01 X16.61708 Y50.86630
G01 X16.53247 Y50.80092
G01 X16.48812 Y50.76074
G01 X16.43946 Y50.71210
G01 X16.38304 Y50.64987
G01 X16.32371 Y50.59155
G01 X16.30014 Y50.57090
G01 X16.26780 Y50.54093
G01 X16.25378 Y50.52719
G01 X16.12942 Y50.42597
G01 X16.07032 Y50.38569
G01 X16.05282 Y50.38660
G01 X16.00590 Y50.42076
G01 X15.99684 Y50.42727
G01 X15.95023 Y50.46044
G01 X15.85376 Y50.53971
G01 X15.79973 Y50.59125
G01 X15.78033 Y50.60954
G01 X15.74068 Y50.64992
G01 X15.68434 Y50.71210
G01 X15.63570 Y50.76074
G01 X15.59138 Y50.80095
G01 X15.50674 Y50.86630
G01 X15.45023 Y50.90570
G01 X15.43951 Y50.91241
G01 X15.30298 Y50.98368
G01 X15.27194 Y50.99892
G01 X15.23925 Y51.01009
G01 X15.09232 Y51.05625
G01 X15.07997 Y51.05906
G01 X15.01213 Y51.07118
G01 X14.90611 Y51.08479
G01 X14.84632 Y51.08774
G01 X14.77751 Y51.08774
G01 X14.71774 Y51.08479
G01 X14.61170 Y51.07118
G01 X14.54388 Y51.05906
G01 X14.53153 Y51.05625
G01 X14.38460 Y51.01009
G01 X14.35191 Y50.99892
G01 X14.32087 Y50.98368
G01 X14.18434 Y50.91241
G01 X14.17362 Y50.90570
G01 X14.11711 Y50.86633
G01 X14.01929 Y50.79076
G01 X13.98493 Y50.76470
G01 X13.93552 Y50.72955
G01 X13.92668 Y50.72257
G01 X13.91642 Y50.71431
G01 X13.78114 Y50.62645
G01 X13.69344 Y50.58071
G01 X13.67312 Y50.57034
G01 X13.65760 Y50.56262
G01 X13.64680 Y50.56435
G01 X13.62877 Y50.58350
G01 X13.61546 Y50.59739
G01 X13.55628 Y50.65820
G01 X13.51952 Y50.69826
G01 X13.46814 Y50.75787
G01 X13.45836 Y50.76943
G01 X13.43608 Y50.79635
G01 X13.43179 Y50.80148
G01 X13.39100 Y50.84987
G01 X13.38439 Y50.85782
G01 X13.35991 Y50.88774
G01 X13.33746 Y50.91385
G01 X13.31134 Y50.93631
G01 X13.27342 Y50.96735
G01 X13.24309 Y50.99079
G01 X13.21632 Y51.00570
G01 X13.17296 Y51.02861
G01 X13.13514 Y51.04718
G01 X13.10946 Y51.05528
G01 X13.06245 Y51.06912
G01 X13.01592 Y51.08114
G01 X13.01147 Y51.08167
G01 X12.99511 Y51.08340
G01 X12.95145 Y51.08749
G01 X12.94632 Y51.08774
G01 X12.91193 Y51.08858
G01 X11.71191 Y51.08858
G01 X11.67751 Y51.08774
G01 X11.67238 Y51.08749
G01 X11.62872 Y51.08340
G01 X11.62308 Y51.08284
G01 X11.60794 Y51.08114
G01 X11.56133 Y51.06912
G01 X11.51434 Y51.05525
G01 X11.48869 Y51.04718
G01 X11.45090 Y51.02861
G01 X11.40754 Y51.00570
G01 X11.38077 Y50.99079
G01 X11.35044 Y50.96735
G01 X11.31252 Y50.93631
G01 X11.28641 Y50.91385
G01 X11.26403 Y50.88784
G01 X11.23299 Y50.84992
G01 X11.20944 Y50.81949
G01 X11.19446 Y50.79257
G01 X11.17157 Y50.74924
G01 X11.15308 Y50.71154
G01 X11.14500 Y50.68591
G01 X11.13114 Y50.63892
G01 X11.11912 Y50.59229
G01 X11.11686 Y50.57154
G01 X11.11277 Y50.52787
G01 X11.11252 Y50.52269
G01 X11.11168 Y50.48830
G01 X11.11168 Y49.03834
G01 X11.11252 Y49.00393
G01 X11.11277 Y48.99877
G01 X11.11686 Y48.95513
G01 X11.11689 Y48.95483
G01 X11.11912 Y48.93438
G01 X11.13114 Y48.88780
G01 X11.14498 Y48.84078
G01 X11.15308 Y48.81510
G01 X11.17162 Y48.77733
G01 X11.19451 Y48.73402
G01 X11.20947 Y48.70713
G01 X11.23291 Y48.67682
G01 X11.23820 Y48.67040
G01 X11.26398 Y48.63888
G01 X11.28641 Y48.61279
G01 X11.31252 Y48.59034
G01 X11.35044 Y48.55930
G01 X11.38077 Y48.53583
G01 X11.40769 Y48.52087
G01 X11.45102 Y48.49796
G01 X11.48869 Y48.47949
G01 X11.51417 Y48.47144
G01 X11.56118 Y48.45757
G01 X11.60792 Y48.44553
G01 X11.62872 Y48.44327
G01 X11.67236 Y48.43918
G01 X11.67751 Y48.43893
G01 X11.71191 Y48.43806
G01 X12.91193 Y48.43806
G01 X12.94632 Y48.43893
G01 X12.95148 Y48.43918
G01 X12.99511 Y48.44327
G01 X13.01592 Y48.44553
G01 X13.06260 Y48.45757
G01 X13.10964 Y48.47144
G01 X13.13514 Y48.47949
G01 X13.17284 Y48.49798
G01 X13.21617 Y48.52087
G01 X13.24307 Y48.53585
G01 X13.27342 Y48.55930
G01 X13.31134 Y48.59034
G01 X13.33746 Y48.61279
G01 X13.35999 Y48.63900
G01 X13.38437 Y48.66880
G01 X13.39107 Y48.67687
G01 X13.43606 Y48.73024
G01 X13.45780 Y48.75490
G01 X13.46971 Y48.76781
G01 X13.49986 Y48.80253
G01 X13.52079 Y48.82808
G01 X13.55610 Y48.86859
G01 X13.62536 Y48.94347
G01 X13.64599 Y48.96511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.64863 Y48.98074 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.64863 Y48.98074
G01 X13.65582 Y48.96730
G01 X13.65864 Y48.96572
G01 X13.69400 Y48.94629
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.02078 Y45.41353 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.02078 Y45.41353
G01 X17.97024 Y45.42885
G01 X17.87603 Y45.44757
G01 X17.71997 Y45.46296
G01 X17.67194 Y45.46532
G01 X16.87192 Y45.46532
G01 X16.82391 Y45.46296
G01 X16.66783 Y45.44757
G01 X16.57362 Y45.42885
G01 X16.42356 Y45.38331
G01 X16.33481 Y45.34655
G01 X16.19648 Y45.27264
G01 X16.11662 Y45.21927
G01 X15.99539 Y45.11978
G01 X15.92747 Y45.05186
G01 X15.82798 Y44.93063
G01 X15.77459 Y44.85075
G01 X15.70067 Y44.71244
G01 X15.66394 Y44.62370
G01 X15.61840 Y44.47363
G01 X15.59968 Y44.37942
G01 X15.58429 Y44.22334
G01 X15.58429 Y44.12728
G01 X15.59968 Y43.97122
G01 X15.61840 Y43.87701
G01 X15.66394 Y43.72692
G01 X15.70067 Y43.63818
G01 X15.77459 Y43.49987
G01 X15.82798 Y43.42001
G01 X15.92747 Y43.29878
G01 X15.99539 Y43.23086
G01 X16.09351 Y43.15032
G01 X16.11662 Y43.13137
G01 X16.19648 Y43.07800
G01 X16.33481 Y43.00406
G01 X16.42356 Y42.96731
G01 X16.57362 Y42.92179
G01 X16.65637 Y42.90533
G01 X17.88741 Y42.90531
G01 X17.97024 Y42.92179
G01 X18.12033 Y42.96731
G01 X18.20907 Y43.00406
G01 X18.34738 Y43.07800
G01 X18.42723 Y43.13137
G01 X18.54847 Y43.23086
G01 X18.61639 Y43.29878
G01 X18.71588 Y43.42001
G01 X18.76925 Y43.49987
G01 X18.84318 Y43.63818
G01 X18.87994 Y43.72692
G01 X18.92546 Y43.87701
G01 X18.92805 Y43.88997
G01 X18.89746 Y43.97584
G01 X18.87882 Y44.02080
G01 X18.84941 Y44.10277
G01 X18.83833 Y44.13924
G01 X18.81347 Y44.20894
G01 X18.79269 Y44.25910
G01 X18.77090 Y44.31991
G01 X18.75840 Y44.36111
G01 X18.73844 Y44.41694
G01 X18.71692 Y44.46891
G01 X18.69790 Y44.52204
G01 X18.68499 Y44.56462
G01 X18.66597 Y44.61773
G01 X18.64446 Y44.66969
G01 X18.62452 Y44.72545
G01 X18.61202 Y44.76670
G01 X18.59020 Y44.82748
G01 X18.56945 Y44.87762
G01 X18.54453 Y44.94742
G01 X18.53351 Y44.98382
G01 X18.51522 Y45.03756
G01 X18.49587 Y45.05570
G01 X18.37951 Y45.16113
G01 X18.31575 Y45.21346
G01 X18.18842 Y45.30790
G01 X18.11273 Y45.35842
G01 X18.02078 Y45.41353
G01 X17.60717 Y45.82712
G01 X8.33292 Y45.82712
G01 X8.33292 Y45.42567
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.33292 Y42.92421 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.33292 Y42.92421
G01 X8.22116 Y43.07564
G01 X8.14742 Y43.37534
G01 X8.14742 Y44.97531
G01 X8.22355 Y45.27983
G01 X8.33292 Y45.42567
G01 X8.35537 Y45.45560
G01 X8.35634 Y45.45590
G01 X8.45194 Y45.46532
G01 X10.85194 Y45.46532
G01 X10.94754 Y45.45590
G01 X11.03944 Y45.42801
G01 X11.12418 Y45.38272
G01 X11.19842 Y45.32179
G01 X11.21363 Y45.30325
G01 X11.25935 Y45.24754
G01 X11.30464 Y45.16284
G01 X11.33253 Y45.07091
G01 X11.34193 Y44.97531
G01 X11.34193 Y43.37531
G01 X11.33253 Y43.27973
G01 X11.30464 Y43.18781
G01 X11.25935 Y43.10307
G01 X11.19842 Y43.02883
G01 X11.12418 Y42.96789
G01 X11.03944 Y42.92261
G01 X10.94754 Y42.89472
G01 X10.85194 Y42.88532
G01 X10.36182 Y42.88532
G01 X10.34965 Y42.88712
G01 X10.25491 Y42.89650
G01 X10.09809 Y42.90419
G01 X10.05194 Y42.90531
G01 X9.25194 Y42.90531
G01 X9.20576 Y42.90419
G01 X9.04892 Y42.89650
G01 X8.95415 Y42.88712
G01 X8.94188 Y42.88532
G01 X8.45194 Y42.88532
G01 X8.35634 Y42.89472
G01 X8.35420 Y42.89538
G01 X8.33292 Y42.92421
G01 X8.33289 Y42.53729
G01 X8.37539 Y42.57978
G01 X8.49662 Y42.67927
G01 X8.57650 Y42.73264
G01 X8.71481 Y42.80655
G01 X8.80356 Y42.84331
G01 X8.94188 Y42.88532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.36182 Y42.88532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.36182 Y42.88532
G01 X10.50033 Y42.84331
G01 X10.58907 Y42.80655
G01 X10.72738 Y42.73264
G01 X10.80723 Y42.67927
G01 X10.92847 Y42.57978
G01 X10.99639 Y42.51186
G01 X11.02164 Y42.48110
G01 X11.09588 Y42.39063
G01 X11.14925 Y42.31075
G01 X11.22318 Y42.17244
G01 X11.25994 Y42.08370
G01 X11.30546 Y41.93363
G01 X11.32420 Y41.83942
G01 X11.33957 Y41.68334
G01 X11.33957 Y41.58728
G01 X11.32420 Y41.43122
G01 X11.30546 Y41.33701
G01 X11.25994 Y41.18692
G01 X11.22318 Y41.09818
G01 X11.14925 Y40.95987
G01 X11.09588 Y40.88001
G01 X10.99639 Y40.75878
G01 X10.92847 Y40.69086
G01 X10.80723 Y40.59137
G01 X10.72738 Y40.53800
G01 X10.58907 Y40.46406
G01 X10.50033 Y40.42731
G01 X10.35024 Y40.38179
G01 X10.26741 Y40.36531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.03640 Y40.36531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.03640 Y40.36531
G01 X8.95362 Y40.34885
G01 X8.80356 Y40.30331
G01 X8.71481 Y40.26655
G01 X8.57650 Y40.19264
G01 X8.49662 Y40.13927
G01 X8.37539 Y40.03978
G01 X8.33289 Y39.99729
G01 X8.33292 Y40.73330
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.33289 Y39.99729 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.33289 Y39.99729
G01 X8.31857 Y39.96274
G01 X8.26246 Y39.80593
G01 X8.23818 Y39.72612
G01 X8.19888 Y39.56930
G01 X8.18524 Y39.50082
G01 X8.16198 Y39.34403
G01 X8.15586 Y39.28208
G01 X8.14816 Y39.12523
G01 X8.14816 Y39.06541
G01 X8.15586 Y38.90859
G01 X8.16198 Y38.84667
G01 X8.18524 Y38.68982
G01 X8.19888 Y38.62135
G01 X8.23818 Y38.46453
G01 X8.26246 Y38.38472
G01 X8.31857 Y38.22790
G01 X8.33292 Y38.19330
G01 X8.37539 Y38.15086
G01 X8.49662 Y38.05137
G01 X8.57650 Y37.99800
G01 X8.71481 Y37.92406
G01 X8.80356 Y37.88731
G01 X8.95362 Y37.84179
G01 X9.03640 Y37.82531
G01 X10.26741 Y37.82531
G01 X10.35024 Y37.80885
G01 X10.50033 Y37.76331
G01 X10.58907 Y37.72655
G01 X10.72738 Y37.65264
G01 X10.80723 Y37.59927
G01 X10.92847 Y37.49978
G01 X10.99639 Y37.43186
G01 X11.09588 Y37.31063
G01 X11.14925 Y37.23075
G01 X11.22318 Y37.09244
G01 X11.25994 Y37.00370
G01 X11.30546 Y36.85363
G01 X11.32420 Y36.75942
G01 X11.33957 Y36.60334
G01 X11.33957 Y36.50728
G01 X11.32420 Y36.35122
G01 X11.30546 Y36.25701
G01 X11.25994 Y36.10692
G01 X11.22318 Y36.01818
G01 X11.14925 Y35.87987
G01 X11.09588 Y35.80001
G01 X10.99639 Y35.67878
G01 X10.92847 Y35.61086
G01 X10.80723 Y35.51137
G01 X10.72738 Y35.45800
G01 X10.58907 Y35.38406
G01 X10.50033 Y35.34731
G01 X10.35024 Y35.30179
G01 X10.26741 Y35.28533
G01 X9.03640 Y35.28533
G01 X8.95362 Y35.30179
G01 X8.86177 Y35.32966
G01 X8.86137 Y35.33014
G01 X8.81557 Y35.38716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.03640 Y35.28533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.03640 Y35.28533
G01 X8.95362 Y35.26885
G01 X8.86175 Y35.24096
G01 X8.86137 Y35.24050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.58583 Y36.14101 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.58583 Y36.14101
G01 X7.58118 Y36.13674
G01 X7.46353 Y36.00852
G01 X7.43815 Y35.97489
G01 X7.41631 Y35.94726
G01 X7.39883 Y35.92615
G01 X7.33366 Y35.83370
G01 X7.32461 Y35.81846
G01 X7.28667 Y35.76100
G01 X7.25781 Y35.72168
G01 X7.18685 Y35.64005
G01 X7.13912 Y35.59031
G01 X7.12962 Y35.58135
G01 X7.01727 Y35.49153
G01 X6.98009 Y35.46379
G01 X6.96028 Y35.45272
G01 X6.82218 Y35.37845
G01 X6.81265 Y35.37342
G01 X6.75804 Y35.35323
G01 X6.63246 Y35.31264
G01 X6.60816 Y35.30695
G01 X6.54036 Y35.29455
G01 X6.44491 Y35.28188
G01 X6.38433 Y35.27891
G01 X6.31552 Y35.27891
G01 X6.25494 Y35.28188
G01 X6.15947 Y35.29455
G01 X6.09165 Y35.30695
G01 X6.06739 Y35.31264
G01 X5.94181 Y35.35323
G01 X5.88715 Y35.37345
G01 X5.87768 Y35.37845
G01 X5.79830 Y35.42112
G01 X5.73958 Y35.45272
G01 X5.71974 Y35.46379
G01 X5.68258 Y35.49153
G01 X5.57021 Y35.58135
G01 X5.56074 Y35.59029
G01 X5.51301 Y35.64005
G01 X5.44204 Y35.72168
G01 X5.41319 Y35.76100
G01 X5.37527 Y35.81840
G01 X5.33826 Y35.88084
G01 X5.30140 Y35.95676
G01 X5.27438 Y36.02013
G01 X5.26160 Y36.05470
G01 X5.22942 Y36.17040
G01 X5.22858 Y36.17347
G01 X5.21423 Y36.23768
G01 X5.21405 Y36.23877
G01 X5.19998 Y36.39387
G01 X5.19772 Y36.42833
G01 X5.19998 Y36.46278
G01 X5.21405 Y36.61787
G01 X5.21423 Y36.61896
G01 X5.22945 Y36.68627
G01 X5.26163 Y36.80204
G01 X5.27438 Y36.83651
G01 X5.30140 Y36.89989
G01 X5.33826 Y36.97578
G01 X5.37527 Y37.03824
G01 X5.41319 Y37.09564
G01 X5.44207 Y37.13499
G01 X5.51301 Y37.21660
G01 X5.53978 Y37.24571
G01 X5.56074 Y37.26636
G01 X5.57021 Y37.27530
G01 X5.68258 Y37.36511
G01 X5.71977 Y37.39285
G01 X5.73953 Y37.40390
G01 X5.87765 Y37.47819
G01 X5.88720 Y37.48325
G01 X5.94186 Y37.50347
G01 X6.06739 Y37.54403
G01 X6.09170 Y37.54972
G01 X6.15947 Y37.56211
G01 X6.25492 Y37.57476
G01 X6.31552 Y37.57774
G01 X6.34344 Y37.57855
G01 X6.38446 Y37.57893
G01 X6.39889 Y37.57921
G01 X6.43010 Y37.58012
G01 X6.54334 Y37.59224
G01 X6.61283 Y37.60496
G01 X6.62556 Y37.60720
G01 X6.68014 Y37.61639
G01 X6.69805 Y37.61959
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.33292 Y38.19330 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.33292 Y38.19330
G01 X8.33292 Y37.74146
G01 X8.48481 Y37.58957
G01 X8.49662 Y37.59927
G01 X8.57650 Y37.65264
G01 X8.71481 Y37.72655
G01 X8.80356 Y37.76331
G01 X8.95362 Y37.80885
G01 X9.03640 Y37.82531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.26741 Y37.82531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.26741 Y37.82531
G01 X10.35024 Y37.84179
G01 X10.50033 Y37.88731
G01 X10.58907 Y37.92406
G01 X10.72738 Y37.99800
G01 X10.80723 Y38.05137
G01 X10.92847 Y38.15086
G01 X10.99639 Y38.21878
G01 X11.02639 Y38.25533
G01 X11.08199 Y38.25533
G01 X12.27894 Y37.05838
G01 X12.27894 Y34.74045
G01 X12.27891 Y34.10027
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.90890 Y34.06466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.90890 Y34.06466
G01 X15.45353 Y34.60929
G01 X15.48914 Y34.64157
G01 X15.54218 Y34.68511
G01 X15.62206 Y34.73847
G01 X15.68256 Y34.77081
G01 X15.77128 Y34.80759
G01 X15.83697 Y34.82750
G01 X15.88200 Y34.83647
G01 X15.92747 Y34.89186
G01 X15.99539 Y34.95978
G01 X16.11662 Y35.05927
G01 X16.19648 Y35.11264
G01 X16.33481 Y35.18655
G01 X16.42356 Y35.22331
G01 X16.57362 Y35.26885
G01 X16.65637 Y35.28533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.94697 Y33.84109 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.94697 Y33.84109
G01 X19.03600 Y33.79545
G01 X19.13480 Y33.76868
G01 X19.23699 Y33.76304
G01 X19.29810 Y33.76606
G01 X19.32299 Y33.76992
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.41892 Y34.74442 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.41892 Y34.74442
G01 X20.47884 Y34.80431
G01 X20.52591 Y34.79966
G01 X20.62197 Y34.79966
G01 X20.66901 Y34.80431
G01 X20.72891 Y34.74442
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.31537 Y33.60815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.31537 Y33.60815
G01 X19.29985 Y33.63990
G01 X19.29878 Y33.64213
G01 X19.30168 Y33.67142
G01 X19.32040 Y33.76563
G01 X19.32119 Y33.76817
G01 X19.32299 Y33.76992
G01 X19.44806 Y33.89077
G01 X19.50071 Y33.95204
G01 X19.50971 Y33.96268
G01 X19.54953 Y34.01076
G01 X19.59871 Y34.07751
G01 X19.61479 Y34.10223
G01 X19.63721 Y34.13469
G01 X19.66602 Y34.17396
G01 X19.73704 Y34.25562
G01 X19.78474 Y34.30533
G01 X19.79883 Y34.31866
G01 X19.80391 Y34.32298
G01 X19.82030 Y34.33736
G01 X19.90117 Y34.41069
G01 X19.95649 Y34.45605
G01 X20.08382 Y34.55051
G01 X20.15001 Y34.59468
G01 X20.28867 Y34.67779
G01 X20.37155 Y34.72201
G01 X20.41892 Y34.74442
G01 X20.52591 Y34.75496
G01 X20.62197 Y34.75496
G01 X20.72891 Y34.74442
G01 X20.77628 Y34.72201
G01 X20.85913 Y34.67782
G01 X20.99782 Y34.59468
G01 X21.06401 Y34.55051
G01 X21.19136 Y34.45605
G01 X21.24669 Y34.41069
G01 X21.32756 Y34.33736
G01 X21.34394 Y34.32298
G01 X21.34905 Y34.31864
G01 X21.35936 Y34.30888
G01 X21.36312 Y34.30535
G01 X21.41082 Y34.25562
G01 X21.48181 Y34.17398
G01 X21.51064 Y34.13469
G01 X21.54864 Y34.07718
G01 X21.58062 Y34.02316
G01 X21.61633 Y33.96870
G01 X21.63363 Y33.94477
G01 X21.63749 Y33.93939
G01 X21.67683 Y33.88389
G01 X21.76698 Y33.77663
G01 X21.78910 Y33.75407
G01 X21.81506 Y33.72661
G01 X21.84033 Y33.69890
G01 X21.84084 Y33.69837
G01 X21.84620 Y33.67142
G01 X21.86157 Y33.51534
G01 X21.86157 Y33.48640
G01 X21.85204 Y33.47147
G01 X21.81984 Y33.42341
G01 X21.73835 Y33.27386
G01 X21.71740 Y33.22428
G01 X21.70975 Y33.20680
G01 X21.70881 Y33.20497
G01 X21.66853 Y33.11074
G01 X21.64945 Y33.05908
G01 X21.62245 Y32.99580
G01 X21.58557 Y32.91983
G01 X21.54861 Y32.85745
G01 X21.51067 Y32.80000
G01 X21.48184 Y32.76070
G01 X21.41085 Y32.67904
G01 X21.36309 Y32.62931
G01 X21.35362 Y32.62034
G01 X21.24128 Y32.53055
G01 X21.20409 Y32.50276
G01 X21.18428 Y32.49172
G01 X21.04618 Y32.41745
G01 X21.03665 Y32.41242
G01 X20.98204 Y32.39222
G01 X20.85646 Y32.35163
G01 X20.83216 Y32.34594
G01 X20.76436 Y32.33355
G01 X20.66894 Y32.32090
G01 X20.60833 Y32.31793
G01 X20.53952 Y32.31793
G01 X20.47892 Y32.32090
G01 X20.38347 Y32.33355
G01 X20.31565 Y32.34594
G01 X20.29139 Y32.35163
G01 X20.16581 Y32.39222
G01 X20.11118 Y32.41242
G01 X20.10168 Y32.41745
G01 X19.96358 Y32.49172
G01 X19.94377 Y32.50279
G01 X19.90658 Y32.53053
G01 X19.79421 Y32.62034
G01 X19.78474 Y32.62931
G01 X19.73701 Y32.67904
G01 X19.66604 Y32.76068
G01 X19.63719 Y32.80000
G01 X19.59927 Y32.85740
G01 X19.56226 Y32.91983
G01 X19.52540 Y32.99575
G01 X19.49838 Y33.05913
G01 X19.48560 Y33.09370
G01 X19.45342 Y33.20939
G01 X19.44473 Y33.24409
G01 X19.43744 Y33.27660
G01 X19.42911 Y33.31008
G01 X19.41905 Y33.34668
G01 X19.39101 Y33.42961
G01 X19.35947 Y33.50812
G01 X19.34428 Y33.54383
G01 X19.31537 Y33.60815
G01 X19.29988 Y33.63990
G01 X19.29985 Y33.63990
G01 X19.23833 Y33.67543
G01 X19.14090 Y33.70708
G01 X19.03904 Y33.71780
G01 X18.97786 Y33.71780
G01 X18.92208 Y33.71193
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.06249 Y32.79017 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.06249 Y32.79017
G01 X18.06099 Y32.77592
G01 X18.06099 Y32.71473
G01 X18.06246 Y32.70050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.88741 Y32.74533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.88741 Y32.74533
G01 X17.97024 Y32.72885
G01 X18.06211 Y32.70099
G01 X18.06246 Y32.70050
G01 X18.06249 Y32.70050
G01 X18.10821 Y32.64358
G01 X18.16981 Y32.57307
G01 X18.24809 Y32.49466
G01 X18.28741 Y32.46040
G01 X18.29536 Y32.45336
G01 X18.34016 Y32.41318
G01 X18.37986 Y32.38013
G01 X18.41895 Y32.34993
G01 X18.46036 Y32.31242
G01 X18.50902 Y32.26375
G01 X18.54654 Y32.22232
G01 X18.60834 Y32.14236
G01 X18.64773 Y32.08580
G01 X18.65340 Y32.07678
G01 X18.72104 Y31.94717
G01 X18.73625 Y31.91618
G01 X18.74740 Y31.88356
G01 X18.79122 Y31.74404
G01 X18.79360 Y31.73370
G01 X18.80572 Y31.66578
G01 X18.81860 Y31.56558
G01 X18.82134 Y31.50973
G01 X18.82134 Y31.44092
G01 X18.81860 Y31.38509
G01 X18.80575 Y31.28489
G01 X18.79360 Y31.21699
G01 X18.79124 Y31.20665
G01 X18.74740 Y31.06711
G01 X18.73625 Y31.03447
G01 X18.72104 Y31.00348
G01 X18.65340 Y30.87386
G01 X18.64773 Y30.86485
G01 X18.60834 Y30.80828
G01 X18.54654 Y30.72832
G01 X18.50902 Y30.68689
G01 X18.46036 Y30.63823
G01 X18.41895 Y30.60071
G01 X18.37986 Y30.57051
G01 X18.34016 Y30.53747
G01 X18.29541 Y30.49733
G01 X18.28736 Y30.49022
G01 X18.24816 Y30.45606
G01 X18.16975 Y30.37755
G01 X18.10829 Y30.30714
G01 X18.06206 Y30.24963
G01 X17.97024 Y30.22179
G01 X17.88741 Y30.20531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.06246 Y30.16050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.06246 Y30.16050
G01 X18.06099 Y30.17473
G01 X18.06099 Y30.23592
G01 X18.06249 Y30.25017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.65637 Y32.74533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.65637 Y32.74533
G01 X16.57362 Y32.76179
G01 X16.42356 Y32.80731
G01 X16.33481 Y32.84406
G01 X16.19648 Y32.91800
G01 X16.16150 Y32.94137
G01 X15.85891 Y32.63878
G01 X15.85891 Y32.26830
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.85891 Y30.68230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.85891 Y30.68230
G01 X15.92747 Y30.59878
G01 X15.99539 Y30.53086
G01 X16.11662 Y30.43137
G01 X16.19648 Y30.37800
G01 X16.33481 Y30.30406
G01 X16.42356 Y30.26731
G01 X16.57362 Y30.22179
G01 X16.65637 Y30.20533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.61789 Y27.67295 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.61789 Y27.67295
G01 X16.64395 Y27.66780
G01 X16.64558 Y27.66846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X15.85891 Y29.72830 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X15.85891 Y29.72830
G01 X15.85891 Y30.68230
G01 X15.84146 Y30.73109
G01 X15.81413 Y30.82095
G01 X15.77484 Y30.97780
G01 X15.75924 Y31.05588
G01 X15.73600 Y31.21272
G01 X15.72897 Y31.28397
G01 X15.72125 Y31.44079
G01 X15.72125 Y31.50985
G01 X15.72897 Y31.66667
G01 X15.73600 Y31.73797
G01 X15.75924 Y31.89476
G01 X15.77484 Y31.97284
G01 X15.81413 Y32.12969
G01 X15.84146 Y32.21955
G01 X15.85891 Y32.26830
G01 X15.92747 Y32.35186
G01 X15.99539 Y32.41978
G01 X16.11662 Y32.51927
G01 X16.19648 Y32.57264
G01 X16.33481 Y32.64655
G01 X16.42356 Y32.68331
G01 X16.57362 Y32.72885
G01 X16.65637 Y32.74533
G01 X17.88741 Y32.74533
G01 X17.97024 Y32.76179
G01 X18.06206 Y32.78963
G01 X18.10829 Y32.84714
G01 X18.16975 Y32.91755
G01 X18.24816 Y32.99606
G01 X18.28736 Y33.03022
G01 X18.29541 Y33.03733
G01 X18.34016 Y33.07746
G01 X18.37986 Y33.11051
G01 X18.41895 Y33.14071
G01 X18.46036 Y33.17823
G01 X18.50902 Y33.22689
G01 X18.54654 Y33.26830
G01 X18.60834 Y33.34828
G01 X18.64374 Y33.39855
G01 X18.64778 Y33.40485
G01 X18.71171 Y33.48999
G01 X18.74649 Y33.52989
G01 X18.75294 Y33.53736
G01 X18.79889 Y33.59148
G01 X18.92208 Y33.71193
G01 X18.92472 Y33.71452
G01 X18.92546 Y33.71701
G01 X18.94420 Y33.81122
G01 X18.94712 Y33.84079
G01 X18.94578 Y33.84348
G01 X18.91484 Y33.90802
G01 X18.88581 Y33.97457
G01 X18.85502 Y34.05303
G01 X18.82731 Y34.13761
G01 X18.81415 Y34.18755
G01 X18.80950 Y34.20616
G01 X18.79360 Y34.27370
G01 X18.79274 Y34.27739
G01 X18.79122 Y34.28407
G01 X18.74740 Y34.42356
G01 X18.73625 Y34.45618
G01 X18.72104 Y34.48717
G01 X18.65340 Y34.61678
G01 X18.64773 Y34.62580
G01 X18.60834 Y34.68236
G01 X18.54654 Y34.76232
G01 X18.50902 Y34.80375
G01 X18.46036 Y34.85242
G01 X18.41895 Y34.88993
G01 X18.37986 Y34.92013
G01 X18.34016 Y34.95318
G01 X18.29536 Y34.99336
G01 X18.28741 Y35.00040
G01 X18.24809 Y35.03466
G01 X18.16981 Y35.11307
G01 X18.10821 Y35.18358
G01 X18.06249 Y35.24050
G01 X18.06246 Y35.24050
G01 X18.06211 Y35.24099
G01 X17.97024 Y35.26885
G01 X17.88741 Y35.28533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.06246 Y35.24050 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.06246 Y35.24050
G01 X18.06099 Y35.25473
G01 X18.06099 Y35.31592
G01 X18.06249 Y35.33017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.94608 Y35.97992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.94608 Y35.97992
G01 X19.31258 Y36.34645
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.99634 Y37.23694 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.99634 Y37.23694
G01 X20.03681 Y37.25856
G01 X20.12555 Y37.29531
G01 X20.27562 Y37.34083
G01 X20.36983 Y37.35957
G01 X20.52591 Y37.37494
G01 X20.62197 Y37.37494
G01 X20.66899 Y37.37032
G01 X20.69286 Y37.39419
G01 X20.67211 Y37.39732
G01 X20.47572 Y37.39732
G01 X20.41118 Y37.38759
G01 X20.33457 Y37.38216
G01 X20.25807 Y37.38873
G01 X20.19769 Y37.39874
G01 X20.09886 Y37.42600
G01 X20.02032 Y37.46674
G01 X20.01392 Y37.47885
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.33389 Y37.99079 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.33389 Y37.99079
G01 X18.33394 Y37.74367
G01 X18.27928 Y37.68904
G01 X18.20907 Y37.72655
G01 X18.12033 Y37.76331
G01 X17.97024 Y37.80885
G01 X17.88741 Y37.82531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.65637 Y37.82531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.65637 Y37.82531
G01 X16.57362 Y37.84179
G01 X16.42356 Y37.88731
G01 X16.33481 Y37.92406
G01 X16.19648 Y37.99800
G01 X16.11662 Y38.05137
G01 X16.09351 Y38.07032
G01 X16.01822 Y38.13209
G01 X14.90893 Y37.02277
G01 X14.90890 Y34.06466
G01 X14.62541 Y33.38023
G01 X14.61774 Y33.36037
G01 X14.59318 Y33.29176
G01 X14.58310 Y33.25857
G01 X14.56593 Y33.18996
G01 X14.56029 Y33.16172
G01 X14.55010 Y33.09309
G01 X14.54759 Y33.06764
G01 X14.54421 Y32.99900
G01 X14.54393 Y32.98671
G01 X14.54393 Y28.09866
G01 X14.54375 Y28.08957
G01 X14.54363 Y28.08636
G01 X14.54347 Y28.07720
G01 X14.54347 Y28.01745
G01 X14.54332 Y28.00823
G01 X14.54271 Y27.99081
G01 X14.54253 Y27.98090
G01 X14.54253 Y27.91916
G01 X14.54238 Y27.90917
G01 X14.54164 Y27.88492
G01 X14.54149 Y27.87328
G01 X14.54149 Y27.80724
G01 X14.54134 Y27.79541
G01 X14.54035 Y27.75614
G01 X14.54017 Y27.74105
G01 X14.54017 Y27.66752
G01 X14.54002 Y27.65215
G01 X14.53954 Y27.62810
G01 X14.53936 Y27.61004
G01 X14.53936 Y27.38116
G01 X14.29435 Y27.13615
G01 X13.66392 Y26.50575
G01 X13.66390 Y24.76031
G01 X13.68681 Y24.77255
G01 X13.77555 Y24.80931
G01 X13.92562 Y24.85485
G01 X14.01983 Y24.87357
G01 X14.04342 Y24.87591
G01 X14.17591 Y24.88896
G01 X14.27197 Y24.88896
G01 X14.42803 Y24.87357
G01 X14.52224 Y24.85485
G01 X14.67233 Y24.80931
G01 X14.76107 Y24.77255
G01 X14.89938 Y24.69864
G01 X14.97924 Y24.64530
G01 X15.10047 Y24.54578
G01 X15.15930 Y24.48698
G01 X15.16443 Y24.47461
G01 X15.22054 Y24.31777
G01 X15.24535 Y24.23616
G01 X15.28464 Y24.07936
G01 X15.29859 Y24.00931
G01 X15.32188 Y23.85249
G01 X15.32815 Y23.78886
G01 X15.33585 Y23.63204
G01 X15.33585 Y23.57060
G01 X15.32815 Y23.41378
G01 X15.32188 Y23.35020
G01 X15.29861 Y23.19333
G01 X15.28464 Y23.12328
G01 X15.24535 Y22.96649
G01 X15.22054 Y22.88488
G01 X15.20517 Y22.84190
G01 X15.19023 Y22.79666
G01 X15.16867 Y22.72559
G01 X15.16839 Y22.72478
G01 X15.10047 Y22.65686
G01 X14.97924 Y22.55737
G01 X14.89938 Y22.50400
G01 X14.76107 Y22.43006
G01 X14.67233 Y22.39331
G01 X14.52224 Y22.34779
G01 X14.43941 Y22.33131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.93629 Y21.07873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.93629 Y21.07873
G01 X12.93629 Y21.10934
G01 X12.94094 Y21.15638
G01 X12.68087 Y21.41643
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.84317 Y19.97348 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.84317 Y19.97348
G01 X14.87055 Y19.92910
G01 X14.91853 Y19.85562
G01 X14.95477 Y19.80452
G01 X14.99310 Y19.75481
G01 X15.01576 Y19.72687
G01 X15.06087 Y19.67394
G01 X15.06542 Y19.66865
G01 X15.13181 Y19.59227
G01 X15.16067 Y19.55296
G01 X15.19861 Y19.49550
G01 X15.23557 Y19.43314
G01 X15.27245 Y19.35715
G01 X15.29943 Y19.29385
G01 X15.31223 Y19.25926
G01 X15.34439 Y19.14361
G01 X15.35963 Y19.07625
G01 X15.35980 Y19.07516
G01 X15.37385 Y18.92009
G01 X15.37614 Y18.88562
G01 X15.37385 Y18.85118
G01 X15.35980 Y18.69609
G01 X15.35963 Y18.69499
G01 X15.34439 Y18.62763
G01 X15.31223 Y18.51199
G01 X15.29943 Y18.47739
G01 X15.27248 Y18.41415
G01 X15.23557 Y18.33812
G01 X15.19864 Y18.27577
G01 X15.16064 Y18.21826
G01 X15.13181 Y18.17899
G01 X15.06082 Y18.09733
G01 X15.01312 Y18.04762
G01 X15.00362 Y18.03866
G01 X14.89127 Y17.94884
G01 X14.85409 Y17.92108
G01 X14.83433 Y17.91006
G01 X14.69620 Y17.83576
G01 X14.68663 Y17.83071
G01 X14.63197 Y17.81049
G01 X14.50646 Y17.76993
G01 X14.48211 Y17.76424
G01 X14.41436 Y17.75184
G01 X14.31894 Y17.73919
G01 X14.25833 Y17.73622
G01 X14.18952 Y17.73622
G01 X14.12892 Y17.73919
G01 X14.03347 Y17.75184
G01 X13.96570 Y17.76424
G01 X13.94139 Y17.76993
G01 X13.81586 Y17.81049
G01 X13.76120 Y17.83071
G01 X13.75165 Y17.83576
G01 X13.61353 Y17.91006
G01 X13.59377 Y17.92108
G01 X13.55658 Y17.94884
G01 X13.44421 Y18.03866
G01 X13.43474 Y18.04760
G01 X13.38704 Y18.09733
G01 X13.31604 Y18.17899
G01 X13.28721 Y18.21826
G01 X13.24924 Y18.27572
G01 X13.21226 Y18.33815
G01 X13.17538 Y18.41410
G01 X13.14838 Y18.47744
G01 X13.13560 Y18.51199
G01 X13.10345 Y18.62768
G01 X13.09793 Y18.64869
G01 X13.08823 Y18.69499
G01 X13.08805 Y18.69609
G01 X13.07398 Y18.85118
G01 X13.07172 Y18.88562
G01 X13.07398 Y18.92009
G01 X13.08805 Y19.07518
G01 X13.08823 Y19.07625
G01 X13.10342 Y19.14356
G01 X13.13558 Y19.25915
G01 X13.14838 Y19.29380
G01 X13.17540 Y19.35720
G01 X13.21228 Y19.43312
G01 X13.24927 Y19.49555
G01 X13.28719 Y19.55296
G01 X13.31604 Y19.59227
G01 X13.38244 Y19.66865
G01 X13.38699 Y19.67394
G01 X13.40883 Y19.69956
G01 X13.42402 Y19.71681
G01 X13.43260 Y19.72626
G01 X13.52244 Y19.84767
G01 X13.52811 Y19.85710
G01 X13.55767 Y19.90297
G01 X13.57660 Y19.93042
G01 X13.60466 Y19.97348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.04886 Y22.20187 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.04886 Y22.20187
G01 X11.00088 Y22.28973
G01 X11.00083 Y22.54828
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.66006 Y21.12341 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.66006 Y21.12341
G01 X12.67180 Y21.18231
G01 X12.67850 Y21.25062
G01 X12.68087 Y21.29862
G01 X12.68087 Y21.41643
G01 X12.41673 Y22.05414
G01 X12.40835 Y22.07586
G01 X12.38379 Y22.14447
G01 X12.37261 Y22.18122
G01 X12.35542 Y22.24983
G01 X12.34912 Y22.28145
G01 X12.33893 Y22.35005
G01 X12.33611 Y22.37878
G01 X12.33273 Y22.44741
G01 X12.33240 Y22.46133
G01 X12.33240 Y26.85365
G01 X12.33273 Y26.86760
G01 X12.33611 Y26.93620
G01 X12.33893 Y26.96495
G01 X12.34492 Y27.00534
G01 X12.35989 Y27.03028
G01 X12.37589 Y27.05426
G01 X12.41719 Y27.10999
G01 X12.43344 Y27.12978
G01 X12.47957 Y27.18070
G01 X12.48803 Y27.18959
G01 X13.45480 Y28.15629
G01 X13.46326 Y28.16521
G01 X13.50939 Y28.21608
G01 X13.52564 Y28.23592
G01 X13.56694 Y28.29160
G01 X13.57512 Y28.30323
G01 X13.57756 Y28.31720
G01 X13.58772 Y28.38581
G01 X13.59024 Y28.41126
G01 X13.59361 Y28.47986
G01 X13.59392 Y28.49216
G01 X13.59392 Y37.37073
G01 X13.59422 Y37.38299
G01 X13.59537 Y37.40631
G01 X13.59567 Y37.41881
G01 X13.59567 Y37.45183
G01 X13.59697 Y37.47804
G01 X13.59796 Y37.48800
G01 X13.59933 Y37.51622
G01 X13.59933 Y37.54903
G01 X13.60095 Y37.58195
G01 X13.60162 Y37.58861
G01 X13.60344 Y37.62640
G01 X13.60344 Y37.65841
G01 X13.60578 Y37.70545
G01 X13.60586 Y37.70641
G01 X13.60852 Y37.76382
G01 X13.60852 Y37.79298
G01 X13.60946 Y37.83019
G01 X13.61066 Y37.85432
G01 X13.61172 Y37.89915
G01 X13.61172 Y38.10143
G01 X12.02389 Y39.68929
G01 X11.98826 Y39.72160
G01 X11.93522 Y39.76511
G01 X11.85537 Y39.81847
G01 X11.79486 Y39.85083
G01 X11.70611 Y39.88759
G01 X11.64046 Y39.90750
G01 X11.54625 Y39.92624
G01 X11.47795 Y39.93295
G01 X11.42994 Y39.93531
G01 X11.02639 Y39.93531
G01 X10.99639 Y39.97186
G01 X10.92847 Y40.03978
G01 X10.80723 Y40.13927
G01 X10.72738 Y40.19264
G01 X10.58907 Y40.26655
G01 X10.50033 Y40.30331
G01 X10.35024 Y40.34885
G01 X10.26741 Y40.36531
G01 X9.03640 Y40.36531
G01 X8.95362 Y40.38179
G01 X8.80356 Y40.42731
G01 X8.71481 Y40.46406
G01 X8.57650 Y40.53800
G01 X8.49662 Y40.59137
G01 X8.37539 Y40.69086
G01 X8.33292 Y40.73330
G01 X8.31857 Y40.76790
G01 X8.26246 Y40.92472
G01 X8.23818 Y41.00453
G01 X8.19888 Y41.16135
G01 X8.18524 Y41.22982
G01 X8.16198 Y41.38667
G01 X8.15586 Y41.44859
G01 X8.14816 Y41.60541
G01 X8.14816 Y41.66523
G01 X8.15586 Y41.82208
G01 X8.16198 Y41.88403
G01 X8.18524 Y42.04082
G01 X8.19888 Y42.10930
G01 X8.23818 Y42.26612
G01 X8.26246 Y42.34592
G01 X8.31857 Y42.50274
G01 X8.33289 Y42.53729
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.92416 Y45.26741 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.92416 Y45.26741
G01 X4.92327 Y45.24993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.90356 Y45.25831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.90356 Y45.25831
G01 X4.92307 Y45.25024
G01 X4.92327 Y45.24993
G01 X4.96353 Y45.19083
G01 X5.06473 Y45.06652
G01 X5.07852 Y45.05245
G01 X5.10846 Y45.02016
G01 X5.12917 Y44.99652
G01 X5.18748 Y44.93716
G01 X5.24971 Y44.88074
G01 X5.29836 Y44.83210
G01 X5.33854 Y44.78775
G01 X5.40392 Y44.70315
G01 X5.41179 Y44.69276
G01 X5.44334 Y44.64658
G01 X5.45004 Y44.63589
G01 X5.52129 Y44.49934
G01 X5.53651 Y44.46837
G01 X5.54768 Y44.43566
G01 X5.56246 Y44.38857
G01 X5.59383 Y44.28872
G01 X5.59665 Y44.27638
G01 X5.60877 Y44.20853
G01 X5.62238 Y44.10251
G01 X5.62533 Y44.04272
G01 X5.62533 Y43.97391
G01 X5.62238 Y43.91415
G01 X5.60877 Y43.80810
G01 X5.59665 Y43.74028
G01 X5.59383 Y43.72794
G01 X5.54768 Y43.58100
G01 X5.53653 Y43.54831
G01 X5.52132 Y43.51732
G01 X5.45004 Y43.38075
G01 X5.44334 Y43.37008
G01 X5.40392 Y43.31349
G01 X5.32810 Y43.21534
G01 X5.30229 Y43.18131
G01 X5.29399 Y43.16960
G01 X5.28723 Y43.16091
G01 X5.25876 Y43.12482
G01 X5.17212 Y42.98832
G01 X5.16567 Y42.97559
G01 X5.14021 Y42.92880
G01 X5.11796 Y42.89040
G01 X5.09851 Y42.85509
G01 X5.09912 Y42.84239
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.09851 Y42.85504 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.09851 Y42.85504
G01 X5.09693 Y42.85220
G01 X5.08342 Y42.84501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.51832 Y42.84503 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.51832 Y42.84503
G01 X3.50164 Y42.85398
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.49988 Y42.84321 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.49988 Y42.84321
G01 X3.48073 Y42.82512
G01 X3.46709 Y42.81207
G01 X3.40590 Y42.75250
G01 X3.36585 Y42.71577
G01 X3.30651 Y42.66462
G01 X3.29483 Y42.65476
G01 X3.26803 Y42.63261
G01 X3.26275 Y42.62817
G01 X3.21439 Y42.58740
G01 X3.20644 Y42.58080
G01 X3.17652 Y42.55631
G01 X3.15040 Y42.53386
G01 X3.12787 Y42.50767
G01 X3.09684 Y42.46972
G01 X3.07344 Y42.43947
G01 X3.05858 Y42.41278
G01 X3.03567 Y42.36945
G01 X3.01708 Y42.33155
G01 X3.00898 Y42.30587
G01 X2.99513 Y42.25885
G01 X2.98312 Y42.21230
G01 X2.98086 Y42.19152
G01 X2.97677 Y42.14788
G01 X2.97652 Y42.14272
G01 X2.97568 Y42.10831
G01 X2.97568 Y40.90831
G01 X2.97652 Y40.87392
G01 X2.97677 Y40.86876
G01 X2.98086 Y40.82513
G01 X2.98312 Y40.80435
G01 X2.99513 Y40.75774
G01 X3.00900 Y40.71075
G01 X3.01708 Y40.68510
G01 X3.03565 Y40.64727
G01 X3.05856 Y40.60394
G01 X3.07347 Y40.57715
G01 X3.08911 Y40.55655
G01 X3.09684 Y40.54692
G01 X3.12787 Y40.50900
G01 X3.15040 Y40.48278
G01 X3.17652 Y40.46033
G01 X3.21444 Y40.42929
G01 X3.24477 Y40.40582
G01 X3.27169 Y40.39086
G01 X3.31502 Y40.36795
G01 X3.35269 Y40.34949
G01 X3.37834 Y40.34138
G01 X3.42533 Y40.32754
G01 X3.47192 Y40.31553
G01 X3.49272 Y40.31326
G01 X3.53636 Y40.30918
G01 X3.54151 Y40.30892
G01 X3.57593 Y40.30808
G01 X5.02591 Y40.30808
G01 X5.06033 Y40.30892
G01 X5.06549 Y40.30918
G01 X5.10913 Y40.31326
G01 X5.12993 Y40.31553
G01 X5.17651 Y40.32754
G01 X5.22350 Y40.34138
G01 X5.24916 Y40.34949
G01 X5.28682 Y40.36795
G01 X5.33016 Y40.39086
G01 X5.35708 Y40.40582
G01 X5.38733 Y40.42922
G01 X5.42525 Y40.46025
G01 X5.45147 Y40.48278
G01 X5.47400 Y40.50900
G01 X5.50504 Y40.54692
G01 X5.52840 Y40.57717
G01 X5.54339 Y40.60409
G01 X5.56627 Y40.64743
G01 X5.58474 Y40.68510
G01 X5.59284 Y40.71075
G01 X5.60671 Y40.75774
G01 X5.61873 Y40.80435
G01 X5.62099 Y40.82513
G01 X5.62508 Y40.86876
G01 X5.62533 Y40.87392
G01 X5.62617 Y40.90831
G01 X5.62617 Y42.10831
G01 X5.62533 Y42.14272
G01 X5.62508 Y42.14788
G01 X5.62099 Y42.19152
G01 X5.61873 Y42.21230
G01 X5.60671 Y42.25885
G01 X5.59287 Y42.30587
G01 X5.58477 Y42.33155
G01 X5.56625 Y42.36932
G01 X5.54336 Y42.41263
G01 X5.52840 Y42.43950
G01 X5.50504 Y42.46972
G01 X5.47400 Y42.50765
G01 X5.47232 Y42.50970
G01 X5.45144 Y42.53388
G01 X5.42525 Y42.55639
G01 X5.39546 Y42.58077
G01 X5.38738 Y42.58748
G01 X5.33381 Y42.63264
G01 X5.30935 Y42.65420
G01 X5.29622 Y42.66630
G01 X5.26170 Y42.69627
G01 X5.23638 Y42.71699
G01 X5.19587 Y42.75230
G01 X5.12078 Y42.82177
G01 X5.09914 Y42.84239
G01 X5.09912 Y42.84239
G01 X5.09790 Y42.84359
G01 X5.08342 Y42.84501
G01 X5.07364 Y42.84308
G01 X5.02591 Y42.83236
G01 X4.96783 Y42.81781
G01 X4.87943 Y42.80018
G01 X4.71281 Y42.77546
G01 X4.63186 Y42.76749
G01 X4.46524 Y42.75931
G01 X4.42594 Y42.75832
G01 X4.17593 Y42.75832
G01 X4.13661 Y42.75931
G01 X3.96999 Y42.76749
G01 X3.88904 Y42.77546
G01 X3.72241 Y42.80018
G01 X3.63402 Y42.81781
G01 X3.57593 Y42.83236
G01 X3.52820 Y42.84308
G01 X3.51832 Y42.84503
G01 X3.49988 Y42.84321
G01 X3.50164 Y42.85398
G01 X3.49376 Y42.86977
G01 X3.48355 Y42.88982
G01 X3.43781 Y42.97755
G01 X3.34979 Y43.11303
G01 X3.34169 Y43.12309
G01 X3.33471 Y43.13190
G01 X3.29953 Y43.18133
G01 X3.27349 Y43.21567
G01 X3.25571 Y43.23868
G01 X3.19793 Y43.31351
G01 X3.17674 Y43.34242
G01 X3.15853 Y43.37003
G01 X3.15183 Y43.38077
G01 X3.08055 Y43.51730
G01 X3.06531 Y43.54831
G01 X3.05416 Y43.58100
G01 X3.00801 Y43.72794
G01 X3.00519 Y43.74028
G01 X2.99308 Y43.80810
G01 X2.97946 Y43.91415
G01 X2.97652 Y43.97391
G01 X2.97652 Y44.04272
G01 X2.97946 Y44.10251
G01 X2.99308 Y44.20853
G01 X3.00519 Y44.27638
G01 X3.00801 Y44.28872
G01 X3.05416 Y44.43566
G01 X3.06531 Y44.46835
G01 X3.08055 Y44.49939
G01 X3.15183 Y44.63589
G01 X3.15856 Y44.64663
G01 X3.19793 Y44.70315
G01 X3.26331 Y44.78775
G01 X3.30346 Y44.83208
G01 X3.35213 Y44.88074
G01 X3.41436 Y44.93716
G01 X3.45465 Y44.97668
G01 X3.47301 Y44.99614
G01 X3.47606 Y44.99939
G01 X3.52455 Y45.05019
G01 X3.60369 Y45.14648
G01 X3.63702 Y45.19327
G01 X3.64339 Y45.20215
G01 X3.67766 Y45.24922
G01 X3.67824 Y45.25001
G01 X3.69826 Y45.25831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.67766 Y45.24922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.67766 Y45.24922
G01 X3.67857 Y45.26672
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.42424 Y47.55562 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.42424 Y47.55562
G01 X3.46557 Y47.64119
G01 X3.44995 Y47.71378
G01 X3.41007 Y47.80441
G01 X3.38208 Y47.85379
G01 X3.30232 Y47.95861
G01 X3.15124 Y48.10969
G01 X3.10626 Y48.16832
G01 X3.13712 Y48.16832
G01 X3.19612 Y48.09641
G01 X3.26404 Y48.02849
G01 X3.36265 Y47.94756
G01 X3.39285 Y47.92280
G01 X3.47273 Y47.86943
G01 X3.61967 Y47.79087
G01 X3.69826 Y47.75831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.90356 Y47.75831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.90356 Y47.75831
G01 X4.98220 Y47.72575
G01 X5.12917 Y47.64721
G01 X5.13701 Y47.64195
G01 X5.13828 Y47.63913
G01 X5.17671 Y47.55453
G01 X5.25058 Y47.42234
G01 X5.26567 Y47.40027
G01 X5.28566 Y47.36941
G01 X5.30516 Y47.33766
G01 X5.34849 Y47.27490
G01 X5.40392 Y47.20312
G01 X5.44334 Y47.14658
G01 X5.45004 Y47.13586
G01 X5.52129 Y46.99933
G01 X5.53653 Y46.96834
G01 X5.54768 Y46.93565
G01 X5.59383 Y46.78872
G01 X5.59665 Y46.77637
G01 X5.60877 Y46.70855
G01 X5.62238 Y46.60251
G01 X5.62533 Y46.54274
G01 X5.62533 Y46.47393
G01 X5.62238 Y46.41414
G01 X5.60877 Y46.30812
G01 X5.59731 Y46.24312
G01 X5.59665 Y46.24028
G01 X5.59383 Y46.22793
G01 X5.54768 Y46.08099
G01 X5.53653 Y46.04831
G01 X5.52129 Y46.01732
G01 X5.45004 Y45.88077
G01 X5.44334 Y45.87007
G01 X5.40392 Y45.81348
G01 X5.33854 Y45.72887
G01 X5.29836 Y45.68455
G01 X5.24971 Y45.63591
G01 X5.18751 Y45.57952
G01 X5.14707 Y45.53985
G01 X5.12886 Y45.52052
G01 X5.07730 Y45.46647
G01 X4.99815 Y45.37018
G01 X4.96483 Y45.32336
G01 X4.95848 Y45.31452
G01 X4.92419 Y45.26743
G01 X4.92416 Y45.26741
G01 X4.92358 Y45.26659
G01 X4.90356 Y45.25831
G01 X3.69826 Y45.25831
G01 X3.67880 Y45.26639
G01 X3.67857 Y45.26672
G01 X3.63831 Y45.32583
G01 X3.53712 Y45.45014
G01 X3.52333 Y45.46421
G01 X3.49338 Y45.49649
G01 X3.47268 Y45.52014
G01 X3.41434 Y45.57952
G01 X3.35213 Y45.63591
G01 X3.30346 Y45.68458
G01 X3.26331 Y45.72887
G01 X3.19793 Y45.81351
G01 X3.19092 Y45.82273
G01 X3.15856 Y45.87002
G01 X3.15183 Y45.88077
G01 X3.08055 Y46.01727
G01 X3.06531 Y46.04831
G01 X3.05416 Y46.08099
G01 X3.00801 Y46.22793
G01 X3.00519 Y46.24028
G01 X2.99308 Y46.30812
G01 X2.97946 Y46.41414
G01 X2.97652 Y46.47393
G01 X2.97652 Y46.54274
G01 X2.97946 Y46.60251
G01 X2.99308 Y46.70855
G01 X3.00519 Y46.77637
G01 X3.00801 Y46.78872
G01 X3.05416 Y46.93565
G01 X3.06531 Y46.96834
G01 X3.08055 Y46.99938
G01 X3.15183 Y47.13588
G01 X3.15856 Y47.14663
G01 X3.19790 Y47.20309
G01 X3.25335 Y47.27490
G01 X3.27667 Y47.30688
G01 X3.28916 Y47.32509
G01 X3.29727 Y47.33713
G01 X3.33763 Y47.39849
G01 X3.37710 Y47.46524
G01 X3.40816 Y47.52384
G01 X3.42424 Y47.55562
G01 X3.46648 Y47.64302
G01 X3.47273 Y47.64721
G01 X3.61967 Y47.72575
G01 X3.69826 Y47.75831
G01 X4.90356 Y47.75831
G01 X4.98220 Y47.79087
G01 X5.12917 Y47.86943
G01 X5.20902 Y47.92280
G01 X5.33783 Y48.02849
G01 X5.40575 Y48.09641
G01 X5.51146 Y48.22524
G01 X5.56483 Y48.30510
G01 X5.64339 Y48.45206
G01 X5.68014 Y48.54078
G01 X5.69434 Y48.58762
G01 X5.72850 Y48.70024
G01 X5.74725 Y48.79445
G01 X5.76358 Y48.96029
G01 X5.76356 Y49.01525
G01 X5.74725 Y49.05475
G01 X5.67158 Y49.21472
G01 X5.63282 Y49.28734
G01 X5.54453 Y49.43468
G01 X5.50664 Y49.49148
G01 X5.40628 Y49.62678
G01 X5.36788 Y49.67360
G01 X5.25584 Y49.79722
G01 X5.21479 Y49.83826
G01 X5.09117 Y49.95028
G01 X5.04441 Y49.98863
G01 X4.90910 Y50.08901
G01 X4.85228 Y50.12694
G01 X4.70494 Y50.21523
G01 X4.63232 Y50.25399
G01 X4.47235 Y50.32965
G01 X4.43072 Y50.34809
G01 X4.42594 Y50.34832
G01 X4.17593 Y50.34832
G01 X4.12790 Y50.34596
G01 X3.96209 Y50.32963
G01 X3.86788 Y50.31088
G01 X3.70842 Y50.26252
G01 X3.61967 Y50.22574
G01 X3.47273 Y50.14720
G01 X3.39285 Y50.09384
G01 X3.26404 Y49.98812
G01 X3.19612 Y49.92020
G01 X3.13712 Y49.84832
G01 X3.10623 Y49.84832
G01 X3.15124 Y49.90697
G01 X3.27728 Y50.03301
G01 X3.41873 Y50.14154
G01 X3.57314 Y50.23069
G01 X3.72764 Y50.29470
G01 X3.74507 Y50.30230
G01 X3.75213 Y50.30555
G01 X3.82734 Y50.34863
G01 X3.88906 Y50.40032
G01 X3.89379 Y50.40425
G01 X3.93704 Y50.44753
G01 X4.00143 Y50.52711
G01 X4.04791 Y50.61835
G01 X4.07138 Y50.70595
G01 X4.07098 Y50.70778
G01 X4.07098 Y50.70781
G01 X4.06877 Y50.71812
G01 X4.04756 Y50.78342
G01 X3.92861 Y51.02170
G01 X3.89219 Y51.07182
G01 X3.81992 Y51.15652
G01 X1.74215 Y53.23430
G01 X1.68005 Y53.28946
G01 X1.64350 Y53.31827
G01 X1.45506 Y53.42746
G01 X1.39389 Y53.45279
G01 X1.34177 Y53.47267
G01 X1.29199 Y53.49007
G01 X1.24815 Y53.54351
G01 X1.19478 Y53.62337
G01 X1.16242 Y53.68388
G01 X1.12567 Y53.77262
G01 X1.11901 Y53.79462
G01 X1.10576 Y53.83828
G01 X1.08701 Y53.93249
G01 X1.08030 Y54.00079
G01 X1.07794 Y54.04880
G01 X1.07794 Y66.41720
G01 X1.08030 Y66.46523
G01 X1.08701 Y66.53353
G01 X1.10576 Y66.62774
G01 X1.12567 Y66.69340
G01 X1.16242 Y66.78215
G01 X1.19478 Y66.84265
G01 X1.24815 Y66.92251
G01 X1.29166 Y66.97554
G01 X1.29463 Y66.97882
G01 X1.29559 Y66.97918
G01 X1.30360 Y66.98210
G01 X1.34035 Y66.99480
G01 X1.36903 Y67.00409
G01 X1.60735 Y67.12309
G01 X1.65749 Y67.15952
G01 X1.74215 Y67.23175
G01 X2.91614 Y68.40577
G01 X2.98756 Y68.48928
G01 X3.02363 Y68.53874
G01 X3.12716 Y68.73203
G01 X3.12511 Y68.77186
G01 X3.12053 Y68.83304
G01 X3.06361 Y69.07706
G01 X3.04342 Y69.10241
G01 X3.04342 Y69.60985
G01 X3.06892 Y69.63078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.19718 Y72.00121 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.19718 Y72.00121
G01 X9.19753 Y72.00053
G01 X9.28631 Y71.95308
G01 X9.37506 Y71.91630
G01 X9.51336 Y71.87434
G01 X9.51351 Y71.87431
G01 X9.52565 Y71.87254
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.15987 Y71.87431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.15987 Y71.87431
G01 X9.51361 Y71.87431
G01 X9.52565 Y71.87254
G01 X9.62034 Y71.86319
G01 X9.77719 Y71.85547
G01 X9.86967 Y71.85547
G01 X10.02649 Y71.86319
G01 X10.12115 Y71.87254
G01 X10.13355 Y71.87436
G01 X10.27183 Y71.91630
G01 X10.36058 Y71.95308
G01 X10.49888 Y72.02699
G01 X10.56190 Y72.06911
G01 X10.57218 Y72.08826
G01 X10.64635 Y72.24508
G01 X10.67810 Y72.32148
G01 X10.73421 Y72.47830
G01 X10.75260 Y72.53880
G01 X10.79187 Y72.69565
G01 X10.80182 Y72.74556
G01 X10.82512 Y72.90238
G01 X10.82946 Y72.94645
G01 X10.83716 Y73.10329
G01 X10.83716 Y73.14538
G01 X10.82946 Y73.30220
G01 X10.82512 Y73.34624
G01 X10.80182 Y73.50309
G01 X10.79187 Y73.55305
G01 X10.75260 Y73.70987
G01 X10.73421 Y73.77035
G01 X10.67810 Y73.92717
G01 X10.64638 Y74.00352
G01 X10.57221 Y74.16034
G01 X10.56195 Y74.17949
G01 X10.49888 Y74.22163
G01 X10.36058 Y74.29557
G01 X10.27183 Y74.33232
G01 X10.12174 Y74.37784
G01 X10.03888 Y74.39432
G01 X9.60787 Y74.39432
G01 X9.52512 Y74.41078
G01 X9.43360 Y74.43855
G01 X9.43342 Y74.43875
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.43396 Y74.35018 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.43396 Y74.35018
G01 X9.52512 Y74.37784
G01 X9.60787 Y74.39432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.03888 Y74.39432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.03888 Y74.39432
G01 X10.12174 Y74.41078
G01 X10.27183 Y74.45630
G01 X10.36058 Y74.49308
G01 X10.49888 Y74.56699
G01 X10.56190 Y74.60911
G01 X10.57218 Y74.62826
G01 X10.64635 Y74.78508
G01 X10.67810 Y74.86148
G01 X10.73421 Y75.01830
G01 X10.75260 Y75.07880
G01 X10.79187 Y75.23565
G01 X10.80182 Y75.28556
G01 X10.82512 Y75.44238
G01 X10.82946 Y75.48645
G01 X10.83716 Y75.64329
G01 X10.83716 Y75.68538
G01 X10.82946 Y75.84220
G01 X10.82512 Y75.88624
G01 X10.80182 Y76.04309
G01 X10.79187 Y76.09305
G01 X10.75260 Y76.24987
G01 X10.73421 Y76.31035
G01 X10.67810 Y76.46717
G01 X10.64638 Y76.54352
G01 X10.57221 Y76.70034
G01 X10.56195 Y76.71949
G01 X10.49888 Y76.76163
G01 X10.36058 Y76.83557
G01 X10.27183 Y76.87232
G01 X10.12174 Y76.91784
G01 X10.03888 Y76.93432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.56195 Y76.71949 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.56195 Y76.71949
G01 X10.56190 Y77.14911
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.56454 Y79.25619 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.56454 Y79.25619
G01 X10.56759 Y79.26211
G01 X10.59875 Y79.32327
G01 X10.68321 Y79.57610
G01 X10.69288 Y79.63729
G01 X10.70167 Y79.74816
G01 X10.70167 Y80.27130
G01 X10.70251 Y80.30574
G01 X10.70421 Y80.34003
G01 X10.70924 Y80.37404
G01 X10.72268 Y80.44151
G01 X10.73103 Y80.47483
G01 X10.74259 Y80.50716
G01 X10.76893 Y80.57077
G01 X10.78361 Y80.60183
G01 X10.80124 Y80.63127
G01 X10.83952 Y80.68855
G01 X10.85996 Y80.71610
G01 X10.88305 Y80.74158
G01 X10.90678 Y80.76647
G01 X11.64409 Y81.50381
G01 X11.66321 Y81.52370
G01 X11.67376 Y81.53510
G01 X11.75623 Y81.64343
G01 X11.75717 Y81.64925
G01 X11.76687 Y81.71044
G01 X11.77566 Y81.82146
G01 X11.77566 Y82.19535
G01 X11.77652 Y82.22979
G01 X11.77927 Y82.28560
G01 X11.79214 Y82.38582
G01 X11.80424 Y82.45362
G01 X11.80662 Y82.46403
G01 X11.85044 Y82.60350
G01 X11.86159 Y82.63617
G01 X11.87680 Y82.66716
G01 X11.94444 Y82.79677
G01 X11.95011 Y82.80579
G01 X11.98953 Y82.86235
G01 X12.05130 Y82.94231
G01 X12.08884 Y82.98374
G01 X12.13751 Y83.03241
G01 X12.17891 Y83.06995
G01 X12.25890 Y83.13172
G01 X12.30248 Y83.16281
G01 X12.31536 Y83.17129
G01 X12.38897 Y83.22672
G01 X12.43413 Y83.26540
G01 X12.44010 Y83.27058
G01 X12.50154 Y83.32430
G01 X12.61622 Y83.44490
G01 X12.61686 Y83.44556
G01 X12.62763 Y83.44884
G01 X12.72184 Y83.46759
G01 X12.87792 Y83.48295
G01 X12.97396 Y83.48295
G01 X13.13004 Y83.46759
G01 X13.22425 Y83.44884
G01 X13.26217 Y83.43733
G01 X13.26222 Y83.43733
G01 X13.35333 Y83.33426
G01 X13.41475 Y83.27622
G01 X13.43857 Y83.25461
G01 X13.48589 Y83.21336
G01 X13.53715 Y83.17256
G01 X13.57566 Y83.14467
G01 X13.59295 Y83.13172
G01 X13.67291 Y83.06995
G01 X13.71434 Y83.03241
G01 X13.76301 Y82.98374
G01 X13.80057 Y82.94231
G01 X13.83077 Y82.90322
G01 X13.86379 Y82.86357
G01 X13.90398 Y82.81877
G01 X13.91104 Y82.81077
G01 X13.94525 Y82.77150
G01 X14.02371 Y82.69316
G01 X14.09417 Y82.63162
G01 X14.15109 Y82.58590
G01 X14.15109 Y82.58587
G01 X14.15160 Y82.58549
G01 X14.17947 Y82.49362
G01 X14.19592 Y82.41077
G01 X14.19592 Y81.17973
G01 X14.17947 Y81.09700
G01 X14.15160 Y81.00516
G01 X14.09417 Y80.95903
G01 X14.02371 Y80.89749
G01 X13.94535 Y80.81925
G01 X13.91104 Y80.77988
G01 X13.90405 Y80.77198
G01 X13.86379 Y80.72710
G01 X13.83072 Y80.68740
G01 X13.80055 Y80.64831
G01 X13.76301 Y80.60691
G01 X13.71434 Y80.55824
G01 X13.67294 Y80.52070
G01 X13.59295 Y80.45893
G01 X13.53639 Y80.41951
G01 X13.52737 Y80.41387
G01 X13.39775 Y80.34620
G01 X13.36677 Y80.33099
G01 X13.33410 Y80.31984
G01 X13.19463 Y80.27602
G01 X13.18422 Y80.27364
G01 X13.11642 Y80.26155
G01 X13.01620 Y80.24867
G01 X12.96039 Y80.24593
G01 X12.89148 Y80.24593
G01 X12.83568 Y80.24867
G01 X12.73542 Y80.26155
G01 X12.66763 Y80.27364
G01 X12.65668 Y80.27618
G01 X12.60144 Y80.28657
G01 X12.57048 Y80.29116
G01 X12.51099 Y80.29756
G01 X12.47129 Y80.30026
G01 X12.40309 Y80.25606
G01 X12.35295 Y80.21964
G01 X12.26829 Y80.14740
G01 X12.23375 Y80.11288
G01 X12.21462 Y80.09297
G01 X12.20408 Y80.08156
G01 X12.12161 Y79.97323
G01 X12.12064 Y79.96726
G01 X12.11097 Y79.90607
G01 X12.10218 Y79.79518
G01 X12.10218 Y76.17481
G01 X12.10436 Y76.11962
G01 X12.10680 Y76.08863
G01 X12.14180 Y75.91520
G01 X12.16166 Y75.85401
G01 X12.17988 Y75.80329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.56195 Y74.17949 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.56195 Y74.17949
G01 X10.56190 Y74.60911
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.60787 Y76.93432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.60787 Y76.93432
G01 X9.52512 Y76.91784
G01 X9.43396 Y76.89018
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.43342 Y76.97875 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.43342 Y76.97875
G01 X9.43360 Y76.97855
G01 X9.52512 Y76.95078
G01 X9.60787 Y76.93432
G01 X10.03888 Y76.93432
G01 X10.12174 Y76.95078
G01 X10.27183 Y76.99630
G01 X10.36058 Y77.03308
G01 X10.49888 Y77.10699
G01 X10.56190 Y77.14911
G01 X10.57218 Y77.16826
G01 X10.64635 Y77.32508
G01 X10.67810 Y77.40148
G01 X10.73421 Y77.55830
G01 X10.75260 Y77.61880
G01 X10.79187 Y77.77565
G01 X10.80182 Y77.82556
G01 X10.82512 Y77.98238
G01 X10.82946 Y78.02645
G01 X10.83716 Y78.18329
G01 X10.83716 Y78.22538
G01 X10.82946 Y78.38223
G01 X10.82512 Y78.42624
G01 X10.80182 Y78.58309
G01 X10.79187 Y78.63305
G01 X10.75260 Y78.78987
G01 X10.73421 Y78.85035
G01 X10.67810 Y79.00717
G01 X10.64638 Y79.08352
G01 X10.57221 Y79.24036
G01 X10.56454 Y79.25619
G01 X10.47546 Y79.25792
G01 X10.30774 Y79.27684
G01 X10.28303 Y79.28217
G01 X10.23495 Y79.29091
G01 X10.22184 Y79.29287
G01 X10.10739 Y79.31956
G01 X10.10612 Y79.31997
G01 X10.08161 Y79.32571
G01 X10.01392 Y79.33810
G01 X9.91844 Y79.35075
G01 X9.85788 Y79.35375
G01 X9.78897 Y79.35375
G01 X9.72842 Y79.35075
G01 X9.63292 Y79.33810
G01 X9.56520 Y79.32571
G01 X9.54089 Y79.32002
G01 X9.41537 Y79.27946
G01 X9.36068 Y79.25926
G01 X9.35118 Y79.25421
G01 X9.21308 Y79.17994
G01 X9.19327 Y79.16886
G01 X9.15608 Y79.14113
G01 X9.04374 Y79.05131
G01 X9.03424 Y79.04235
G01 X8.98651 Y78.99261
G01 X8.91549 Y78.91090
G01 X8.88669 Y78.87166
G01 X8.88072 Y78.86343
G01 X8.84874 Y78.81428
G01 X8.81178 Y78.75182
G01 X8.77490 Y78.67590
G01 X8.74788 Y78.61253
G01 X8.73510 Y78.57798
G01 X8.70292 Y78.46229
G01 X8.68773 Y78.39498
G01 X8.68755 Y78.39388
G01 X8.67348 Y78.23882
G01 X8.67122 Y78.20432
G01 X8.67348 Y78.16991
G01 X8.68755 Y78.01476
G01 X8.68773 Y78.01370
G01 X8.70292 Y77.94639
G01 X8.73510 Y77.83069
G01 X8.74788 Y77.79615
G01 X8.77488 Y77.73280
G01 X8.81176 Y77.65685
G01 X8.84874 Y77.59442
G01 X8.88669 Y77.53702
G01 X8.91554 Y77.49770
G01 X8.98651 Y77.41604
G01 X9.03429 Y77.36625
G01 X9.04371 Y77.35736
G01 X9.12799 Y77.29000
G01 X9.15552 Y77.26681
G01 X9.20833 Y77.21997
G01 X9.21252 Y77.21621
G01 X9.25936 Y77.17405
G01 X9.32568 Y77.10684
G01 X9.38735 Y77.03689
G01 X9.43342 Y76.97875
G01 X9.43581 Y76.94553
G01 X9.43396 Y76.89018
G01 X9.42959 Y76.88449
G01 X9.38715 Y76.83244
G01 X9.32580 Y76.76171
G01 X9.24582 Y76.68134
G01 X9.20838 Y76.64870
G01 X9.20338 Y76.64431
G01 X9.15550 Y76.60184
G01 X9.12789 Y76.57857
G01 X9.04374 Y76.51134
G01 X9.03426 Y76.50235
G01 X8.99479 Y76.46196
G01 X8.98651 Y76.45261
G01 X8.91549 Y76.37090
G01 X8.90190 Y76.35241
G01 X8.88669 Y76.33166
G01 X8.84877 Y76.27425
G01 X8.81176 Y76.21180
G01 X8.77490 Y76.13590
G01 X8.74788 Y76.07253
G01 X8.73510 Y76.03793
G01 X8.70292 Y75.92226
G01 X8.68773 Y75.85495
G01 X8.68755 Y75.85388
G01 X8.67348 Y75.69879
G01 X8.67122 Y75.66432
G01 X8.67348 Y75.62988
G01 X8.68755 Y75.47479
G01 X8.68773 Y75.47370
G01 X8.70295 Y75.40639
G01 X8.70866 Y75.38579
G01 X8.73510 Y75.29069
G01 X8.74788 Y75.25615
G01 X8.77488 Y75.19280
G01 X8.81176 Y75.11685
G01 X8.84874 Y75.05442
G01 X8.88669 Y74.99702
G01 X8.91554 Y74.95770
G01 X8.98651 Y74.87604
G01 X9.03429 Y74.82625
G01 X9.04374 Y74.81734
G01 X9.12789 Y74.75008
G01 X9.15552 Y74.72681
G01 X9.20833 Y74.67997
G01 X9.21252 Y74.67621
G01 X9.25936 Y74.63405
G01 X9.32568 Y74.56684
G01 X9.38735 Y74.49689
G01 X9.43342 Y74.43875
G01 X9.43581 Y74.40553
G01 X9.43396 Y74.35018
G01 X9.42959 Y74.34449
G01 X9.38715 Y74.29244
G01 X9.32580 Y74.22171
G01 X9.24582 Y74.14134
G01 X9.20838 Y74.10870
G01 X9.20338 Y74.10431
G01 X9.15550 Y74.06184
G01 X9.12791 Y74.03860
G01 X9.04376 Y73.97131
G01 X9.03426 Y73.96235
G01 X8.98651 Y73.91261
G01 X8.91552 Y73.83095
G01 X8.88669 Y73.79166
G01 X8.85646 Y73.74695
G01 X8.84877 Y73.73425
G01 X8.81176 Y73.67180
G01 X8.77490 Y73.59590
G01 X8.74788 Y73.53253
G01 X8.73510 Y73.49796
G01 X8.73487 Y73.49717
G01 X8.70292 Y73.38226
G01 X8.68773 Y73.31495
G01 X8.68755 Y73.31388
G01 X8.67348 Y73.15879
G01 X8.67122 Y73.12432
G01 X8.67348 Y73.08988
G01 X8.68755 Y72.93479
G01 X8.68773 Y72.93370
G01 X8.69830 Y72.88399
G01 X8.70295 Y72.86639
G01 X8.73510 Y72.75069
G01 X8.74788 Y72.71615
G01 X8.77488 Y72.65280
G01 X8.81176 Y72.57685
G01 X8.84874 Y72.51442
G01 X8.88669 Y72.45702
G01 X8.91554 Y72.41767
G01 X8.94940 Y72.37871
G01 X8.98476 Y72.33459
G01 X9.01750 Y72.29016
G01 X9.02708 Y72.27749
G01 X9.05570 Y72.24035
G01 X9.11984 Y72.14330
G01 X9.16622 Y72.06118
G01 X9.19718 Y72.00121
G01 X9.19591 Y71.98778
G01 X9.18384 Y71.92781
G01 X9.16962 Y71.88074
G01 X9.15987 Y71.87431
G01 X9.02344 Y71.78435
G01 X8.97579 Y71.76055
G01 X8.92939 Y71.73538
G01 X8.84966 Y71.68849
G01 X8.80665 Y71.66106
G01 X8.74671 Y71.60114
G01 X8.70287 Y71.52859
G01 X8.67640 Y71.44246
G01 X8.67435 Y71.42499
G01 X8.67318 Y71.38432
G01 X8.67318 Y69.78430
G01 X8.67435 Y69.74366
G01 X8.67640 Y69.72619
G01 X8.70287 Y69.64005
G01 X8.72263 Y69.60490
G01 X8.74671 Y69.56754
G01 X8.80663 Y69.50762
G01 X8.87915 Y69.46375
G01 X8.96525 Y69.43729
G01 X8.98273 Y69.43525
G01 X9.02344 Y69.43409
G01 X9.66581 Y69.43409
G01 X9.77683 Y69.42527
G01 X9.83802 Y69.41557
G01 X10.09060 Y69.33122
G01 X10.15174 Y69.30005
G01 X10.16154 Y69.29431
G01 X10.20759 Y69.21471
G01 X10.23535 Y69.12923
G01 X10.23012 Y69.11143
G01 X10.20195 Y69.01542
G01 X10.17660 Y68.95425
G01 X10.06754 Y68.76596
G01 X10.03873 Y68.72939
G01 X9.98346 Y68.66716
G01 X8.42146 Y67.10516
G01 X8.33680 Y67.03292
G01 X8.28667 Y66.99650
G01 X8.28181 Y66.99302
G01 X8.14689 Y66.97473
G01 X8.13137 Y66.97412
G01 X8.10381 Y66.97359
G01 X6.42091 Y66.97359
G01 X6.38649 Y66.97272
G01 X6.35220 Y66.97105
G01 X6.31819 Y66.96599
G01 X6.25073 Y66.95258
G01 X6.21740 Y66.94422
G01 X6.18507 Y66.93267
G01 X6.12149 Y66.90633
G01 X6.09043 Y66.89165
G01 X6.06099 Y66.87399
G01 X6.00371 Y66.83572
G01 X5.97615 Y66.81527
G01 X5.95068 Y66.79218
G01 X5.92576 Y66.76848
G01 X5.85261 Y66.69530
G01 X5.02594 Y65.86866
G01 X4.94133 Y65.79645
G01 X4.88964 Y65.75891
G01 X4.88672 Y65.75568
G01 X4.87489 Y65.74293
G01 X4.81972 Y65.72388
G01 X4.76607 Y65.70760
G01 X4.70496 Y65.68581
G01 X4.66252 Y65.66823
G01 X4.60920 Y65.64910
G01 X4.55266 Y65.63196
G01 X4.50455 Y65.61476
G01 X4.45967 Y65.59617
G01 X4.41380 Y65.57976
G01 X4.35655 Y65.56239
G01 X4.31068 Y65.54598
G01 X4.26579 Y65.52739
G01 X4.21769 Y65.51019
G01 X4.16115 Y65.49305
G01 X4.10783 Y65.47392
G01 X4.06541 Y65.45637
G01 X4.00430 Y65.43455
G01 X3.95401 Y65.41931
G01 X3.95160 Y65.41710
G01 X3.90415 Y65.36965
G01 X3.79869 Y65.25330
G01 X3.79020 Y65.24375
G01 X3.77258 Y65.21756
G01 X3.75972 Y65.19670
G01 X3.72394 Y65.13628
G01 X3.70224 Y65.04961
G01 X3.68949 Y64.98573
G01 X3.66625 Y64.82889
G01 X3.66056 Y64.77141
G01 X3.65284 Y64.61459
G01 X3.65284 Y64.55904
G01 X3.66056 Y64.40222
G01 X3.66625 Y64.34476
G01 X3.68949 Y64.18792
G01 X3.70224 Y64.12404
G01 X3.72394 Y64.03735
G01 X3.75972 Y63.97695
G01 X3.79767 Y63.91952
G01 X3.82653 Y63.88017
G01 X3.89749 Y63.79854
G01 X3.94525 Y63.74880
G01 X3.95472 Y63.73984
G01 X4.03674 Y63.67428
G01 X4.06706 Y63.65005
G01 X4.10420 Y63.62234
G01 X4.12406 Y63.61121
G01 X4.23953 Y63.54911
G01 X4.26216 Y63.53694
G01 X4.27171 Y63.53191
G01 X4.32637 Y63.51169
G01 X4.45190 Y63.47113
G01 X4.47623 Y63.46544
G01 X4.54392 Y63.45307
G01 X4.63940 Y63.44040
G01 X4.69998 Y63.43742
G01 X4.76889 Y63.43742
G01 X4.82945 Y63.44040
G01 X4.92492 Y63.45307
G01 X4.99262 Y63.46544
G01 X5.01695 Y63.47113
G01 X5.14248 Y63.51169
G01 X5.19714 Y63.53191
G01 X5.20669 Y63.53694
G01 X5.34479 Y63.61121
G01 X5.36460 Y63.62229
G01 X5.40178 Y63.65005
G01 X5.51413 Y63.73986
G01 X5.52360 Y63.74880
G01 X5.57135 Y63.79854
G01 X5.64232 Y63.88017
G01 X5.67118 Y63.91952
G01 X5.70912 Y63.97695
G01 X5.74608 Y64.03935
G01 X5.78296 Y64.11530
G01 X5.80996 Y64.17862
G01 X5.82274 Y64.21319
G01 X5.85492 Y64.32889
G01 X5.87011 Y64.39612
G01 X5.87029 Y64.39729
G01 X5.88436 Y64.55231
G01 X5.88710 Y64.60166
G01 X5.88751 Y64.62162
G01 X5.89564 Y64.71637
G01 X5.89693 Y64.72500
G01 X5.92688 Y64.76960
G01 X6.00519 Y64.86691
G01 X6.01029 Y64.87222
G01 X6.01987 Y64.88197
G01 X6.57940 Y65.44151
G01 X6.66401 Y65.51370
G01 X6.71410 Y65.55012
G01 X6.71900 Y65.55365
G01 X6.85400 Y65.57194
G01 X6.86955 Y65.57255
G01 X6.89708 Y65.57308
G01 X7.78908 Y65.57308
G01 X7.90010 Y65.56429
G01 X7.96129 Y65.55459
G01 X8.21372 Y65.47029
G01 X8.27488 Y65.43912
G01 X8.28382 Y65.43333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.78214 Y65.46125 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.78214 Y65.46125
G01 X8.78103 Y65.39439
G01 X8.80063 Y65.29389
G01 X8.81857 Y65.23539
G01 X8.82931 Y65.21012
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.37196 Y65.11837 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.37196 Y65.11837
G01 X8.35443 Y65.09323
G01 X8.33175 Y65.05850
G01 X8.22558 Y64.92447
G01 X8.18446 Y64.88197
G01 X8.17353 Y64.87044
G01 X8.14445 Y64.83907
G01 X8.07033 Y64.76973
G01 X8.06076 Y64.76066
G01 X8.01301 Y64.71093
G01 X7.94204 Y64.62927
G01 X7.91318 Y64.58995
G01 X7.87526 Y64.53257
G01 X7.83825 Y64.47011
G01 X7.80140 Y64.39422
G01 X7.77437 Y64.33082
G01 X7.76160 Y64.29622
G01 X7.72941 Y64.18058
G01 X7.71423 Y64.11327
G01 X7.71405 Y64.11218
G01 X7.69998 Y63.95708
G01 X7.69772 Y63.92264
G01 X7.69998 Y63.88817
G01 X7.71405 Y63.73308
G01 X7.71423 Y63.73201
G01 X7.72068 Y63.69963
G01 X7.72941 Y63.66470
G01 X7.76160 Y63.54901
G01 X7.77437 Y63.51446
G01 X7.80140 Y63.45106
G01 X7.83825 Y63.37517
G01 X7.87526 Y63.31271
G01 X7.91318 Y63.25533
G01 X7.94204 Y63.21601
G01 X8.01301 Y63.13435
G01 X8.06076 Y63.08462
G01 X8.07023 Y63.07565
G01 X8.16363 Y63.00100
G01 X8.18258 Y62.98584
G01 X8.21974 Y62.95813
G01 X8.23957 Y62.94703
G01 X8.33647 Y62.89491
G01 X8.37767 Y62.87276
G01 X8.38722 Y62.86770
G01 X8.44186 Y62.84751
G01 X8.56739 Y62.80695
G01 X8.59169 Y62.80126
G01 X8.65941 Y62.78889
G01 X8.75491 Y62.77621
G01 X8.81547 Y62.77324
G01 X8.88438 Y62.77324
G01 X8.94493 Y62.77621
G01 X9.04044 Y62.78889
G01 X9.10815 Y62.80126
G01 X9.13246 Y62.80695
G01 X9.25799 Y62.84751
G01 X9.31265 Y62.86773
G01 X9.32217 Y62.87276
G01 X9.46027 Y62.94703
G01 X9.48011 Y62.95810
G01 X9.51727 Y62.98586
G01 X9.62961 Y63.07565
G01 X9.63909 Y63.08462
G01 X9.68684 Y63.13435
G01 X9.75781 Y63.21601
G01 X9.78666 Y63.25533
G01 X9.82458 Y63.31271
G01 X9.86159 Y63.37517
G01 X9.89845 Y63.45106
G01 X9.92547 Y63.51444
G01 X9.93825 Y63.54901
G01 X9.97043 Y63.66470
G01 X9.98562 Y63.73201
G01 X9.98580 Y63.73308
G01 X9.99987 Y63.88817
G01 X10.00213 Y63.92262
G01 X9.99987 Y63.95708
G01 X9.98580 Y64.11220
G01 X9.98562 Y64.11327
G01 X9.97043 Y64.18058
G01 X9.93825 Y64.29627
G01 X9.92547 Y64.33084
G01 X9.89845 Y64.39422
G01 X9.86159 Y64.47011
G01 X9.82458 Y64.53257
G01 X9.78666 Y64.58995
G01 X9.75781 Y64.62927
G01 X9.68684 Y64.71093
G01 X9.63909 Y64.76066
G01 X9.62961 Y64.76963
G01 X9.51973 Y64.85746
G01 X9.51727 Y64.85944
G01 X9.48014 Y64.88716
G01 X9.46027 Y64.89825
G01 X9.32217 Y64.97252
G01 X9.31265 Y64.97755
G01 X9.25799 Y64.99777
G01 X9.22177 Y65.00946
G01 X9.11801 Y65.05231
G01 X9.11166 Y65.05556
G01 X9.06134 Y65.07877
G01 X9.04338 Y65.08629
G01 X8.89375 Y65.16719
G01 X8.82934 Y65.21012
G01 X8.82931 Y65.21012
G01 X8.82911 Y65.21027
G01 X8.80190 Y65.21027
G01 X8.64585 Y65.19490
G01 X8.55164 Y65.17616
G01 X8.40155 Y65.13064
G01 X8.37196 Y65.11837
G01 X8.37323 Y65.12017
G01 X8.37323 Y65.15441
G01 X8.36251 Y65.25634
G01 X8.33084 Y65.35380
G01 X8.28555 Y65.43221
G01 X8.28382 Y65.43333
G01 X8.57993 Y65.43333
G01 X8.62794 Y65.43569
G01 X8.69624 Y65.44240
G01 X8.78047 Y65.45916
G01 X8.78214 Y65.46125
G01 X8.78811 Y65.46876
G01 X8.84102 Y65.53071
G01 X8.87869 Y65.57153
G01 X8.90203 Y65.59785
G01 X8.92205 Y65.62134
G01 X8.95039 Y65.65294
G01 X9.00091 Y65.70633
G01 X9.02187 Y65.72756
G01 X9.03185 Y65.73729
G01 X9.05016 Y65.75446
G01 X9.07506 Y65.77819
G01 X11.89707 Y68.60018
G01 X11.92080 Y68.62507
G01 X11.94388 Y68.65055
G01 X11.96433 Y68.67811
G01 X12.00261 Y68.73538
G01 X12.02024 Y68.76482
G01 X12.03492 Y68.79588
G01 X12.06126 Y68.85949
G01 X12.07281 Y68.89182
G01 X12.08117 Y68.92515
G01 X12.09461 Y68.99258
G01 X12.09964 Y69.02662
G01 X12.10025 Y69.03904
G01 X12.10167 Y69.06083
G01 X12.10444 Y69.09530
G01 X12.11097 Y69.14991
G01 X12.12064 Y69.21110
G01 X12.20502 Y69.46378
G01 X12.23619 Y69.52497
G01 X12.24112 Y69.53447
G01 X12.24193 Y69.53604
G01 X12.24193 Y69.54191
G01 X12.16921 Y69.69571
G01 X12.13654 Y69.77429
G01 X12.07693 Y69.94094
G01 X12.05813 Y70.00277
G01 X12.01640 Y70.16936
G01 X12.00627 Y70.22019
G01 X11.98153 Y70.38684
G01 X11.97713 Y70.43142
G01 X11.96895 Y70.59804
G01 X11.96895 Y70.64059
G01 X11.97713 Y70.80721
G01 X11.98153 Y70.85181
G01 X12.00627 Y71.01846
G01 X12.01640 Y71.06929
G01 X12.05813 Y71.23588
G01 X12.07693 Y71.29771
G01 X12.13654 Y71.46436
G01 X12.16921 Y71.54295
G01 X12.24190 Y71.69669
G01 X12.24193 Y72.48531
G01 X12.12593 Y72.60134
G01 X11.93891 Y72.97530
G01 X11.93891 Y75.37532
G01 X12.12593 Y75.74934
G01 X12.17988 Y75.80329
G01 X12.37919 Y75.74408
G01 X12.44038 Y75.73438
G01 X12.55143 Y75.72556
G01 X13.72595 Y75.72556
G01 X13.76664 Y75.72440
G01 X13.78409 Y75.72236
G01 X13.87019 Y75.69590
G01 X13.94190 Y75.65261
G01 X13.94276 Y75.65203
G01 X14.00263 Y75.59216
G01 X14.02839 Y75.55198
G01 X14.07959 Y75.46577
G01 X14.10702 Y75.41551
G01 X14.12709 Y75.37532
G01 X14.21594 Y75.24131
G01 X14.22353 Y75.22988
G01 X14.29125 Y75.21218
G01 X14.34355 Y75.20390
G01 X14.35259 Y75.20839
G01 X14.40055 Y75.23367
G01 X14.48360 Y75.28005
G01 X14.59669 Y75.35594
G01 X14.61772 Y75.37286
G01 X14.64581 Y75.39435
G01 X14.67492 Y75.41556
G01 X14.71403 Y75.44616
G01 X14.79890 Y75.51172
G01 X14.85546 Y75.55114
G01 X14.86448 Y75.55681
G01 X14.99409 Y75.62445
G01 X15.02508 Y75.63966
G01 X15.05775 Y75.65081
G01 X15.19722 Y75.69463
G01 X15.20763 Y75.69701
G01 X15.27542 Y75.70910
G01 X15.37565 Y75.72198
G01 X15.43146 Y75.72473
G01 X15.50037 Y75.72473
G01 X15.55617 Y75.72198
G01 X15.65642 Y75.70910
G01 X15.72422 Y75.69701
G01 X15.73463 Y75.69463
G01 X15.87408 Y75.65081
G01 X15.90677 Y75.63966
G01 X15.93775 Y75.62445
G01 X16.06735 Y75.55681
G01 X16.07639 Y75.55114
G01 X16.13295 Y75.51172
G01 X16.21291 Y75.44995
G01 X16.25434 Y75.41241
G01 X16.30301 Y75.36374
G01 X16.34052 Y75.32234
G01 X16.37070 Y75.28330
G01 X16.40379 Y75.24355
G01 X16.44398 Y75.19872
G01 X16.45104 Y75.19077
G01 X16.48530 Y75.15142
G01 X16.56371 Y75.07316
G01 X16.63417 Y75.01162
G01 X16.69107 Y74.96590
G01 X16.69109 Y74.96587
G01 X16.69160 Y74.96549
G01 X16.71947 Y74.87362
G01 X16.73592 Y74.79077
G01 X16.73592 Y73.55973
G01 X16.71947 Y73.47700
G01 X16.67395 Y73.32691
G01 X16.63717 Y73.23819
G01 X16.56326 Y73.09986
G01 X16.50989 Y73.02001
G01 X16.49092 Y72.99689
G01 X16.41040 Y72.89877
G01 X16.34245 Y72.83085
G01 X16.22124 Y72.73136
G01 X16.14136 Y72.67800
G01 X16.00303 Y72.60406
G01 X15.91434 Y72.56730
G01 X15.76425 Y72.52179
G01 X15.67004 Y72.50304
G01 X15.51393 Y72.48767
G01 X15.41789 Y72.48767
G01 X15.26184 Y72.50304
G01 X15.16763 Y72.52179
G01 X15.01754 Y72.56730
G01 X14.92882 Y72.60406
G01 X14.79049 Y72.67800
G01 X14.71063 Y72.73136
G01 X14.58940 Y72.83085
G01 X14.52148 Y72.89877
G01 X14.42198 Y73.02001
G01 X14.36862 Y73.09986
G01 X14.29468 Y73.23819
G01 X14.25793 Y73.32691
G01 X14.21594 Y73.46537
G01 X14.21414 Y73.47759
G01 X14.20479 Y73.57225
G01 X14.19707 Y73.72907
G01 X14.19592 Y73.77533
G01 X14.19592 Y74.57532
G01 X14.19707 Y74.62158
G01 X14.20479 Y74.77840
G01 X14.21414 Y74.87306
G01 X14.21594 Y74.88523
G01 X14.21594 Y75.24134
G01 X14.12709 Y75.37532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.34355 Y75.20390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.34355 Y75.20390
G01 X14.29468 Y75.11243
G01 X14.25793 Y75.02371
G01 X14.21594 Y74.88523
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.21594 Y73.46537 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.21594 Y73.46537
G01 X14.21594 Y72.97530
G01 X14.20652 Y72.87972
G01 X14.17863 Y72.78780
G01 X14.13888 Y72.71343
G01 X14.13336 Y72.70309
G01 X14.07243 Y72.62882
G01 X13.99816 Y72.56789
G01 X13.91345 Y72.52262
G01 X13.82153 Y72.49473
G01 X13.72595 Y72.48531
G01 X12.24193 Y72.48531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.24190 Y71.69669 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.24190 Y71.69669
G01 X12.25186 Y71.70485
G01 X12.33172 Y71.75821
G01 X12.47868 Y71.83675
G01 X12.56743 Y71.87350
G01 X12.72686 Y71.92189
G01 X12.82107 Y71.94063
G01 X12.98691 Y71.95697
G01 X13.08297 Y71.95697
G01 X13.24878 Y71.94063
G01 X13.34299 Y71.92189
G01 X13.50245 Y71.87350
G01 X13.59120 Y71.83675
G01 X13.73817 Y71.75821
G01 X13.81802 Y71.70485
G01 X13.94683 Y71.59913
G01 X14.01475 Y71.53121
G01 X14.12046 Y71.40241
G01 X14.17383 Y71.32252
G01 X14.25239 Y71.17559
G01 X14.28914 Y71.08684
G01 X14.30492 Y71.03469
G01 X14.30492 Y70.20383
G01 X14.28940 Y70.15268
G01 X14.28851 Y70.15202
G01 X14.28617 Y70.15031
G01 X14.20296 Y70.08948
G01 X14.08411 Y69.98527
G01 X14.07085 Y69.97117
G01 X14.03994 Y69.94023
G01 X14.01851 Y69.91996
G01 X13.96169 Y69.85964
G01 X13.90776 Y69.79525
G01 X13.88495 Y69.76931
G01 X13.85899 Y69.74648
G01 X13.74091 Y69.64762
G01 X13.73060 Y69.64028
G01 X13.67258 Y69.60315
G01 X13.57977 Y69.54996
G01 X13.52572 Y69.52438
G01 X13.46209 Y69.49804
G01 X13.40581 Y69.47790
G01 X13.30258 Y69.44988
G01 X13.23527 Y69.43510
G01 X13.22283 Y69.43302
G01 X13.06938 Y69.41943
G01 X13.03494 Y69.41722
G01 X13.00047 Y69.41943
G01 X12.84703 Y69.43302
G01 X12.83456 Y69.43510
G01 X12.76725 Y69.44988
G01 X12.65722 Y69.47975
G01 X12.60581 Y69.49167
G01 X12.56019 Y69.50051
G01 X12.53428 Y69.50597
G01 X12.50594 Y69.51249
G01 X12.35961 Y69.53266
G01 X12.25554 Y69.53825
G01 X12.24820 Y69.53861
G01 X12.24112 Y69.53447
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.24820 Y69.53861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.24820 Y69.53861
G01 X12.24584 Y69.53873
G01 X12.24193 Y69.54191
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.56195 Y71.87431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.56195 Y71.87431
G01 X10.56190 Y72.06911
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.13322 Y71.87431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.13322 Y71.87431
G01 X10.56195 Y71.87431
G01 X10.62344 Y71.81282
G01 X10.83766 Y71.38432
G01 X10.83766 Y69.78430
G01 X10.66560 Y69.40030
G01 X10.62344 Y69.38148
G01 X10.41298 Y69.29431
G01 X10.16154 Y69.29431
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.41298 Y69.29431 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.41298 Y69.29431
G01 X10.23012 Y69.11143
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.25372 Y64.04464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.25372 Y64.04464
G01 X11.25598 Y64.07910
G01 X11.27005 Y64.23417
G01 X11.27023 Y64.23526
G01 X11.28541 Y64.30257
G01 X11.31760 Y64.41827
G01 X11.33037 Y64.45282
G01 X11.35740 Y64.51621
G01 X11.39428 Y64.59213
G01 X11.43126 Y64.65457
G01 X11.46918 Y64.71197
G01 X11.48707 Y64.73636
G01 X11.49801 Y64.75124
G01 X11.56901 Y64.83293
G01 X11.57363 Y64.83818
G01 X11.61676 Y64.88266
G01 X11.62623 Y64.89163
G01 X11.73858 Y64.98144
G01 X11.77576 Y65.00920
G01 X11.79557 Y65.02025
G01 X11.93367 Y65.09452
G01 X11.94317 Y65.09955
G01 X11.99781 Y65.11974
G01 X12.12339 Y65.16033
G01 X12.14764 Y65.16602
G01 X12.21546 Y65.17842
G01 X12.31091 Y65.19107
G01 X12.37152 Y65.19404
G01 X12.44033 Y65.19404
G01 X12.50093 Y65.19107
G01 X12.59638 Y65.17842
G01 X12.66420 Y65.16602
G01 X12.68846 Y65.16033
G01 X12.81404 Y65.11974
G01 X12.86867 Y65.09955
G01 X12.87817 Y65.09452
G01 X13.01627 Y65.02025
G01 X13.03611 Y65.00918
G01 X13.07327 Y64.98144
G01 X13.14680 Y64.92266
G01 X13.18559 Y64.89165
G01 X13.19509 Y64.88266
G01 X13.24284 Y64.83293
G01 X13.31383 Y64.75127
G01 X13.34266 Y64.71197
G01 X13.38058 Y64.65457
G01 X13.41759 Y64.59211
G01 X13.45445 Y64.51621
G01 X13.48147 Y64.45284
G01 X13.49425 Y64.41827
G01 X13.52643 Y64.30257
G01 X13.54162 Y64.23526
G01 X13.54180 Y64.23420
G01 X13.55587 Y64.07910
G01 X13.55813 Y64.04461
G01 X13.55760 Y64.03364
G01 X13.55587 Y64.01019
G01 X13.54180 Y63.85510
G01 X13.54162 Y63.85401
G01 X13.52643 Y63.78670
G01 X13.49425 Y63.67100
G01 X13.48147 Y63.63646
G01 X13.45447 Y63.57311
G01 X13.41759 Y63.49717
G01 X13.38061 Y63.43473
G01 X13.34264 Y63.37728
G01 X13.31381 Y63.33801
G01 X13.24281 Y63.25635
G01 X13.19511 Y63.20664
G01 X13.18561 Y63.19765
G01 X13.07327 Y63.10786
G01 X13.03608 Y63.08012
G01 X13.01632 Y63.06907
G01 X12.87820 Y62.99478
G01 X12.86865 Y62.98972
G01 X12.81399 Y62.96951
G01 X12.68846 Y62.92894
G01 X12.66415 Y62.92325
G01 X12.59638 Y62.91086
G01 X12.50093 Y62.89821
G01 X12.44033 Y62.89524
G01 X12.37152 Y62.89524
G01 X12.31091 Y62.89821
G01 X12.21546 Y62.91086
G01 X12.14769 Y62.92325
G01 X12.12339 Y62.92894
G01 X11.99786 Y62.96951
G01 X11.94320 Y62.98972
G01 X11.94104 Y62.99084
G01 X11.93365 Y62.99478
G01 X11.87490 Y63.02635
G01 X11.79552 Y63.06907
G01 X11.77576 Y63.08010
G01 X11.73858 Y63.10786
G01 X11.62623 Y63.19765
G01 X11.61673 Y63.20664
G01 X11.56903 Y63.25635
G01 X11.49804 Y63.33801
G01 X11.46921 Y63.37728
G01 X11.43124 Y63.43473
G01 X11.39425 Y63.49717
G01 X11.35737 Y63.57311
G01 X11.33037 Y63.63646
G01 X11.31760 Y63.67100
G01 X11.28544 Y63.78670
G01 X11.27023 Y63.85401
G01 X11.27005 Y63.85510
G01 X11.25598 Y64.01019
G01 X11.25372 Y64.04464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.80972 Y64.00466 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.80972 Y64.00466
G01 X14.81198 Y64.03910
G01 X14.82605 Y64.19419
G01 X14.82623 Y64.19528
G01 X14.84141 Y64.26257
G01 X14.87362 Y64.37832
G01 X14.87860 Y64.39183
G01 X14.88637 Y64.41284
G01 X14.91340 Y64.47621
G01 X14.95025 Y64.55210
G01 X14.98726 Y64.61456
G01 X15.01360 Y64.65568
G01 X15.02518 Y64.67197
G01 X15.05404 Y64.71129
G01 X15.12501 Y64.79292
G01 X15.17276 Y64.84265
G01 X15.18226 Y64.85165
G01 X15.29458 Y64.94143
G01 X15.33174 Y64.96917
G01 X15.35157 Y64.98025
G01 X15.48967 Y65.05452
G01 X15.49917 Y65.05954
G01 X15.55381 Y65.07974
G01 X15.67936 Y65.12033
G01 X15.70364 Y65.12602
G01 X15.77144 Y65.13841
G01 X15.86694 Y65.15109
G01 X15.92752 Y65.15406
G01 X15.99633 Y65.15406
G01 X16.05688 Y65.15109
G01 X16.15238 Y65.13841
G01 X16.22020 Y65.12602
G01 X16.24449 Y65.12033
G01 X16.37004 Y65.07974
G01 X16.42465 Y65.05954
G01 X16.43417 Y65.05452
G01 X16.57227 Y64.98025
G01 X16.59206 Y64.96917
G01 X16.62927 Y64.94143
G01 X16.67451 Y64.90527
G01 X16.74159 Y64.85162
G01 X16.75111 Y64.84265
G01 X16.79881 Y64.79292
G01 X16.86981 Y64.71129
G01 X16.89864 Y64.67197
G01 X16.93656 Y64.61456
G01 X16.97359 Y64.55213
G01 X17.01045 Y64.47621
G01 X17.03747 Y64.41284
G01 X17.05025 Y64.37827
G01 X17.08243 Y64.26257
G01 X17.09762 Y64.19528
G01 X17.09780 Y64.19422
G01 X17.11184 Y64.03910
G01 X17.11360 Y64.01563
G01 X17.11411 Y64.00458
G01 X17.11184 Y63.97019
G01 X17.09780 Y63.81507
G01 X17.09762 Y63.81400
G01 X17.08243 Y63.74669
G01 X17.05025 Y63.63102
G01 X17.03747 Y63.59645
G01 X17.01045 Y63.53308
G01 X16.97359 Y63.45716
G01 X16.93656 Y63.39473
G01 X16.89864 Y63.33732
G01 X16.86981 Y63.29800
G01 X16.79881 Y63.21637
G01 X16.75111 Y63.16664
G01 X16.74159 Y63.15764
G01 X16.62927 Y63.06785
G01 X16.59206 Y63.04012
G01 X16.57230 Y63.02907
G01 X16.43420 Y62.95477
G01 X16.42465 Y62.94972
G01 X16.36999 Y62.92950
G01 X16.24446 Y62.88894
G01 X16.22013 Y62.88325
G01 X16.15238 Y62.87085
G01 X16.05691 Y62.85820
G01 X15.99633 Y62.85523
G01 X15.92752 Y62.85523
G01 X15.86691 Y62.85820
G01 X15.77144 Y62.87085
G01 X15.70369 Y62.88325
G01 X15.67936 Y62.88894
G01 X15.55386 Y62.92950
G01 X15.49922 Y62.94972
G01 X15.48965 Y62.95477
G01 X15.35152 Y63.02907
G01 X15.33176 Y63.04012
G01 X15.29458 Y63.06785
G01 X15.18223 Y63.15764
G01 X15.17273 Y63.16664
G01 X15.12501 Y63.21637
G01 X15.05404 Y63.29800
G01 X15.02518 Y63.33732
G01 X14.98726 Y63.39473
G01 X14.95028 Y63.45716
G01 X14.91340 Y63.53308
G01 X14.88637 Y63.59645
G01 X14.87360 Y63.63102
G01 X14.84144 Y63.74669
G01 X14.82976 Y63.79529
G01 X14.82623 Y63.81400
G01 X14.82602 Y63.81512
G01 X14.81198 Y63.97019
G01 X14.80972 Y64.00466
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.25372 Y59.04465 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.25372 Y59.04465
G01 X11.25598 Y59.07909
G01 X11.27005 Y59.23418
G01 X11.27023 Y59.23527
G01 X11.28544 Y59.30258
G01 X11.31762 Y59.41828
G01 X11.33037 Y59.45282
G01 X11.35737 Y59.51617
G01 X11.39428 Y59.59212
G01 X11.43124 Y59.65455
G01 X11.45148 Y59.68671
G01 X11.46921 Y59.71201
G01 X11.49801 Y59.75127
G01 X11.56903 Y59.83294
G01 X11.60175 Y59.86806
G01 X11.61673 Y59.88267
G01 X11.62623 Y59.89161
G01 X11.73858 Y59.98142
G01 X11.77576 Y60.00919
G01 X11.79552 Y60.02021
G01 X11.93365 Y60.09451
G01 X11.94320 Y60.09956
G01 X11.99786 Y60.11978
G01 X12.12339 Y60.16034
G01 X12.14769 Y60.16603
G01 X12.21546 Y60.17843
G01 X12.31091 Y60.19108
G01 X12.37152 Y60.19405
G01 X12.44033 Y60.19405
G01 X12.50093 Y60.19108
G01 X12.59638 Y60.17843
G01 X12.66415 Y60.16603
G01 X12.68846 Y60.16034
G01 X12.81399 Y60.11978
G01 X12.86865 Y60.09956
G01 X12.87820 Y60.09451
G01 X13.01632 Y60.02021
G01 X13.03611 Y60.00916
G01 X13.07327 Y59.98142
G01 X13.18561 Y59.89164
G01 X13.19511 Y59.88264
G01 X13.24281 Y59.83294
G01 X13.31381 Y59.75127
G01 X13.34264 Y59.71201
G01 X13.38061 Y59.65455
G01 X13.41759 Y59.59212
G01 X13.45447 Y59.51617
G01 X13.48147 Y59.45282
G01 X13.49425 Y59.41828
G01 X13.52643 Y59.30258
G01 X13.54162 Y59.23527
G01 X13.54180 Y59.23421
G01 X13.55587 Y59.07909
G01 X13.55813 Y59.04460
G01 X13.55760 Y59.03362
G01 X13.55587 Y59.01018
G01 X13.54180 Y58.85511
G01 X13.54162 Y58.85402
G01 X13.52643 Y58.78671
G01 X13.49425 Y58.67101
G01 X13.48147 Y58.63644
G01 X13.45445 Y58.57307
G01 X13.41759 Y58.49715
G01 X13.38058 Y58.43472
G01 X13.34266 Y58.37731
G01 X13.31383 Y58.33802
G01 X13.24284 Y58.25636
G01 X13.19509 Y58.20662
G01 X13.18561 Y58.19766
G01 X13.07327 Y58.10784
G01 X13.03608 Y58.08011
G01 X13.01627 Y58.06903
G01 X12.87817 Y57.99476
G01 X12.86865 Y57.98973
G01 X12.81404 Y57.96954
G01 X12.68846 Y57.92895
G01 X12.66420 Y57.92326
G01 X12.59638 Y57.91087
G01 X12.50091 Y57.89819
G01 X12.44033 Y57.89522
G01 X12.37152 Y57.89522
G01 X12.31094 Y57.89819
G01 X12.21546 Y57.91087
G01 X12.14764 Y57.92326
G01 X12.12339 Y57.92895
G01 X11.99781 Y57.96954
G01 X11.94320 Y57.98973
G01 X11.93367 Y57.99476
G01 X11.79557 Y58.06903
G01 X11.77579 Y58.08008
G01 X11.75293 Y58.09669
G01 X11.73858 Y58.10784
G01 X11.73792 Y58.10838
G01 X11.62623 Y58.19766
G01 X11.61676 Y58.20662
G01 X11.56901 Y58.25636
G01 X11.49801 Y58.33802
G01 X11.46918 Y58.37731
G01 X11.43126 Y58.43472
G01 X11.39428 Y58.49715
G01 X11.35740 Y58.57307
G01 X11.33037 Y58.63647
G01 X11.31760 Y58.67101
G01 X11.28541 Y58.78671
G01 X11.27023 Y58.85402
G01 X11.27005 Y58.85511
G01 X11.25598 Y59.01018
G01 X11.25372 Y59.04465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.69772 Y58.92263 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.69772 Y58.92263
G01 X7.69998 Y58.95709
G01 X7.71405 Y59.11221
G01 X7.71423 Y59.11328
G01 X7.72941 Y59.18059
G01 X7.76017 Y59.29118
G01 X7.76157 Y59.29616
G01 X7.77437 Y59.33083
G01 X7.80140 Y59.39420
G01 X7.83828 Y59.47012
G01 X7.87526 Y59.53256
G01 X7.91318 Y59.58996
G01 X7.94204 Y59.62928
G01 X8.01301 Y59.71091
G01 X8.06073 Y59.76065
G01 X8.07023 Y59.76964
G01 X8.18258 Y59.85943
G01 X8.21976 Y59.88719
G01 X8.23952 Y59.89821
G01 X8.37765 Y59.97251
G01 X8.38720 Y59.97756
G01 X8.44186 Y59.99778
G01 X8.56739 Y60.03835
G01 X8.59169 Y60.04404
G01 X8.65946 Y60.05643
G01 X8.75491 Y60.06908
G01 X8.81552 Y60.07205
G01 X8.88433 Y60.07205
G01 X8.94493 Y60.06908
G01 X9.04038 Y60.05643
G01 X9.10815 Y60.04404
G01 X9.13246 Y60.03835
G01 X9.25799 Y59.99778
G01 X9.31265 Y59.97756
G01 X9.32220 Y59.97251
G01 X9.46032 Y59.89821
G01 X9.48008 Y59.88719
G01 X9.51727 Y59.85943
G01 X9.62961 Y59.76961
G01 X9.63911 Y59.76065
G01 X9.68684 Y59.71091
G01 X9.75781 Y59.62928
G01 X9.78666 Y59.58996
G01 X9.82458 Y59.53256
G01 X9.86159 Y59.47012
G01 X9.89845 Y59.39420
G01 X9.92547 Y59.33083
G01 X9.93825 Y59.29626
G01 X9.97043 Y59.18059
G01 X9.98562 Y59.11328
G01 X9.98580 Y59.11221
G01 X9.99987 Y58.95709
G01 X10.00213 Y58.92263
G01 X9.99987 Y58.88818
G01 X9.98580 Y58.73307
G01 X9.98562 Y58.73200
G01 X9.97043 Y58.66471
G01 X9.93825 Y58.54902
G01 X9.92547 Y58.51445
G01 X9.89845 Y58.45107
G01 X9.86159 Y58.37515
G01 X9.82458 Y58.31272
G01 X9.78666 Y58.25532
G01 X9.75781 Y58.21600
G01 X9.68684 Y58.13436
G01 X9.63911 Y58.08463
G01 X9.62961 Y58.07564
G01 X9.51727 Y57.98585
G01 X9.48011 Y57.95811
G01 X9.46027 Y57.94704
G01 X9.32217 Y57.87277
G01 X9.31250 Y57.86766
G01 X9.26769 Y57.84869
G01 X9.25882 Y57.84501
G01 X9.24041 Y57.83751
G01 X9.11684 Y57.77284
G01 X9.08623 Y57.75306
G01 X9.04630 Y57.72875
G01 X9.04569 Y57.72839
G01 X8.90800 Y57.75583
G01 X8.88580 Y57.75824
G01 X8.84620 Y57.76362
G01 X8.81509 Y57.76870
G01 X8.76020 Y57.77551
G01 X8.65946 Y57.78887
G01 X8.59164 Y57.80127
G01 X8.56739 Y57.80696
G01 X8.44181 Y57.84754
G01 X8.38715 Y57.86776
G01 X8.37767 Y57.87277
G01 X8.33653 Y57.89489
G01 X8.23957 Y57.94704
G01 X8.21981 Y57.95806
G01 X8.18258 Y57.98585
G01 X8.07023 Y58.07566
G01 X8.06073 Y58.08463
G01 X8.01301 Y58.13436
G01 X7.94204 Y58.21600
G01 X7.91318 Y58.25532
G01 X7.87526 Y58.31272
G01 X7.83828 Y58.37515
G01 X7.80140 Y58.45107
G01 X7.77437 Y58.51447
G01 X7.76160 Y58.54902
G01 X7.72941 Y58.66471
G01 X7.71423 Y58.73200
G01 X7.71405 Y58.73309
G01 X7.69998 Y58.88818
G01 X7.69772 Y58.92263
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.68540 Y56.47059 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.68540 Y56.47059
G01 X5.68350 Y56.46965
G01 X5.62297 Y56.48044
G01 X5.56419 Y56.49741
G01 X5.55843 Y56.49964
G01 X5.55794 Y56.50038
G01 X5.46798 Y56.64231
G01 X5.55794 Y56.50041
G01 X5.55794 Y56.15243
G01 X5.55789 Y56.15209
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.46798 Y56.64231 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.46798 Y56.64231
G01 X5.43150 Y56.71310
G01 X5.41029 Y56.75148
G01 X5.37113 Y56.81770
G01 X5.34463 Y56.85913
G01 X5.28472 Y56.91905
G01 X5.28218 Y56.92080
G01 X5.21220 Y56.96289
G01 X5.12607 Y56.98936
G01 X5.10857 Y56.99141
G01 X5.06793 Y56.99258
G01 X3.67382 Y56.99258
G01 X3.62259 Y56.95905
G01 X3.55396 Y56.91793
G01 X3.50270 Y56.89045
G01 X3.46793 Y56.87399
G01 X3.43524 Y56.85702
G01 X3.43496 Y56.85687
G01 X3.34291 Y56.64231
G01 X3.34291 Y55.04232
G01 X3.46793 Y54.79233
G01 X3.53966 Y54.72058
G01 X3.60847 Y54.69208
G01 X5.06793 Y54.69208
G01 X5.10857 Y54.69325
G01 X5.12607 Y54.69530
G01 X5.21220 Y54.72177
G01 X5.28472 Y54.76561
G01 X5.34463 Y54.82553
G01 X5.37113 Y54.86696
G01 X5.42927 Y54.96523
G01 X5.46025 Y55.02291
G01 X5.46973 Y55.04232
G01 X5.55794 Y55.17785
G01 X5.56653 Y55.19104
G01 X5.57524 Y55.19472
G01 X5.67588 Y55.21397
G01 X5.68502 Y55.21476
G01 X5.73976 Y55.18502
G01 X5.74207 Y55.18375
G01 X5.82594 Y55.13790
G01 X5.93747 Y55.06480
G01 X5.96132 Y55.04613
G01 X5.97173 Y55.03813
G01 X6.01789 Y55.00328
G01 X6.03338 Y54.99121
G01 X6.07074 Y54.96137
G01 X6.14057 Y54.90554
G01 X6.17775 Y54.87778
G01 X6.19752 Y54.86675
G01 X6.30003 Y54.81161
G01 X6.34047 Y54.80148
G01 X6.40628 Y54.78834
G01 X6.56312 Y54.76510
G01 X6.62246 Y54.75924
G01 X6.77928 Y54.75154
G01 X6.83655 Y54.75154
G01 X6.99337 Y54.75924
G01 X7.05276 Y54.76510
G01 X7.20955 Y54.78834
G01 X7.27534 Y54.80148
G01 X7.31583 Y54.81161
G01 X7.41832 Y54.86673
G01 X7.43810 Y54.87778
G01 X7.47531 Y54.90556
G01 X7.58763 Y54.99535
G01 X7.59713 Y55.00432
G01 X7.64483 Y55.05405
G01 X7.72792 Y55.14961
G01 X7.74778 Y55.17247
G01 X7.79581 Y55.22535
G01 X7.81029 Y55.24283
G01 X7.90915 Y55.34260
G01 X7.98164 Y55.40437
G01 X8.01892 Y55.43475
G01 X8.03122 Y55.44435
G01 X8.06147 Y55.54399
G01 X8.07793 Y55.62670
G01 X8.07793 Y56.05771
G01 X8.06147 Y56.14061
G01 X8.03114 Y56.24041
G01 X7.98057 Y56.27996
G01 X7.90927 Y56.34214
G01 X7.84280 Y56.40688
G01 X7.80015 Y56.45347
G01 X7.79515 Y56.45895
G01 X7.74752 Y56.51199
G01 X7.72436 Y56.53914
G01 X7.64483 Y56.63061
G01 X7.59713 Y56.68034
G01 X7.58763 Y56.68928
G01 X7.54829 Y56.72072
G01 X7.47531 Y56.77909
G01 X7.43810 Y56.80688
G01 X7.41826 Y56.81796
G01 X7.28014 Y56.89223
G01 X7.27067 Y56.89723
G01 X7.21603 Y56.91742
G01 X7.09045 Y56.95801
G01 X7.06620 Y56.96370
G01 X6.99838 Y56.97610
G01 X6.90290 Y56.98877
G01 X6.84232 Y56.99174
G01 X6.77351 Y56.99174
G01 X6.71293 Y56.98877
G01 X6.61748 Y56.97610
G01 X6.54969 Y56.96370
G01 X6.52540 Y56.95801
G01 X6.39983 Y56.91742
G01 X6.34519 Y56.89723
G01 X6.33567 Y56.89220
G01 X6.19757 Y56.81793
G01 X6.17775 Y56.80686
G01 X6.14057 Y56.77909
G01 X6.03333 Y56.69339
G01 X6.01789 Y56.68138
G01 X5.96122 Y56.63861
G01 X5.94214 Y56.62466
G01 X5.89030 Y56.58801
G01 X5.82586 Y56.54681
G01 X5.74433 Y56.49969
G01 X5.68543 Y56.47061
G01 X5.68540 Y56.47059
G01 X5.63668 Y56.37945
G01 X5.59993 Y56.29070
G01 X5.55789 Y56.15209
G01 X5.55611 Y56.14013
G01 X5.54674 Y56.04531
G01 X5.53905 Y55.88849
G01 X5.53905 Y55.79616
G01 X5.54674 Y55.63932
G01 X5.55611 Y55.54448
G01 X5.55789 Y55.53251
G01 X5.55789 Y55.53246
G01 X5.55794 Y55.53221
G01 X5.55794 Y55.17785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.68502 Y55.21476 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.68502 Y55.21476
G01 X5.63668 Y55.30518
G01 X5.59993 Y55.39393
G01 X5.55789 Y55.53246
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.07793 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.07793 Y56.05771
G01 X8.09441 Y56.14061
G01 X8.12464 Y56.24031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.03114 Y56.24041 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.03114 Y56.24041
G01 X8.07623 Y56.23792
G01 X8.12464 Y56.24031
G01 X8.13691 Y56.24988
G01 X8.17427 Y56.28034
G01 X8.24666 Y56.34204
G01 X8.34547 Y56.44173
G01 X8.35974 Y56.45895
G01 X8.40808 Y56.51219
G01 X8.51100 Y56.63061
G01 X8.55872 Y56.68034
G01 X8.56822 Y56.68930
G01 X8.68057 Y56.77912
G01 X8.71775 Y56.80686
G01 X8.73757 Y56.81793
G01 X8.87567 Y56.89220
G01 X8.88529 Y56.89728
G01 X8.93030 Y56.91633
G01 X8.93904 Y56.91996
G01 X8.95756 Y56.92751
G01 X9.08105 Y56.99215
G01 X9.11161 Y57.01191
G01 X9.15156 Y57.03622
G01 X9.15214 Y57.03655
G01 X9.28984 Y57.00914
G01 X9.31204 Y57.00673
G01 X9.35164 Y57.00134
G01 X9.38275 Y56.99626
G01 X9.43764 Y56.98946
G01 X9.53838 Y56.97610
G01 X9.60620 Y56.96370
G01 X9.63045 Y56.95801
G01 X9.75603 Y56.91742
G01 X9.81067 Y56.89723
G01 X9.82014 Y56.89223
G01 X9.95826 Y56.81796
G01 X9.97810 Y56.80688
G01 X10.01531 Y56.77909
G01 X10.08829 Y56.72072
G01 X10.12763 Y56.68928
G01 X10.13713 Y56.68034
G01 X10.18483 Y56.63061
G01 X10.26436 Y56.53914
G01 X10.28752 Y56.51199
G01 X10.33515 Y56.45895
G01 X10.34015 Y56.45347
G01 X10.38280 Y56.40688
G01 X10.44927 Y56.34214
G01 X10.52057 Y56.27996
G01 X10.57114 Y56.24041
G01 X10.61623 Y56.23792
G01 X10.66464 Y56.24031
G01 X10.67691 Y56.24988
G01 X10.71427 Y56.28034
G01 X10.78666 Y56.34204
G01 X10.88547 Y56.44173
G01 X10.89974 Y56.45895
G01 X10.94808 Y56.51219
G01 X11.05100 Y56.63061
G01 X11.09872 Y56.68034
G01 X11.10822 Y56.68930
G01 X11.22057 Y56.77912
G01 X11.25775 Y56.80686
G01 X11.27757 Y56.81793
G01 X11.41567 Y56.89220
G01 X11.42519 Y56.89723
G01 X11.47983 Y56.91742
G01 X11.60540 Y56.95801
G01 X11.62969 Y56.96370
G01 X11.69748 Y56.97610
G01 X11.79293 Y56.98877
G01 X11.85351 Y56.99174
G01 X11.92232 Y56.99174
G01 X11.98290 Y56.98877
G01 X12.07838 Y56.97610
G01 X12.14620 Y56.96370
G01 X12.17045 Y56.95801
G01 X12.29603 Y56.91742
G01 X12.35067 Y56.89723
G01 X12.36014 Y56.89223
G01 X12.49826 Y56.81796
G01 X12.51810 Y56.80688
G01 X12.55531 Y56.77909
G01 X12.62829 Y56.72072
G01 X12.66763 Y56.68928
G01 X12.67713 Y56.68034
G01 X12.72483 Y56.63061
G01 X12.80436 Y56.53914
G01 X12.82752 Y56.51199
G01 X12.87515 Y56.45895
G01 X12.88015 Y56.45347
G01 X12.92280 Y56.40688
G01 X12.98927 Y56.34214
G01 X13.06057 Y56.27996
G01 X13.11114 Y56.24041
G01 X13.15623 Y56.23792
G01 X13.20464 Y56.24031
G01 X13.21691 Y56.24988
G01 X13.25427 Y56.28034
G01 X13.32666 Y56.34204
G01 X13.42547 Y56.44173
G01 X13.43974 Y56.45895
G01 X13.48808 Y56.51219
G01 X13.59100 Y56.63061
G01 X13.63872 Y56.68034
G01 X13.64822 Y56.68930
G01 X13.76057 Y56.77912
G01 X13.79775 Y56.80686
G01 X13.81757 Y56.81793
G01 X13.95567 Y56.89220
G01 X13.96519 Y56.89723
G01 X14.01983 Y56.91742
G01 X14.14540 Y56.95801
G01 X14.16969 Y56.96370
G01 X14.23748 Y56.97610
G01 X14.33293 Y56.98877
G01 X14.39351 Y56.99174
G01 X14.46232 Y56.99174
G01 X14.52290 Y56.98877
G01 X14.61838 Y56.97610
G01 X14.68620 Y56.96370
G01 X14.71045 Y56.95801
G01 X14.83603 Y56.91742
G01 X14.89067 Y56.89723
G01 X14.90014 Y56.89223
G01 X15.03826 Y56.81796
G01 X15.05810 Y56.80688
G01 X15.09531 Y56.77909
G01 X15.16829 Y56.72072
G01 X15.20763 Y56.68928
G01 X15.21713 Y56.68034
G01 X15.26483 Y56.63061
G01 X15.34436 Y56.53914
G01 X15.36752 Y56.51199
G01 X15.41515 Y56.45895
G01 X15.42008 Y56.45352
G01 X15.46272 Y56.40696
G01 X15.52927 Y56.34214
G01 X15.60057 Y56.27996
G01 X15.65112 Y56.24041
G01 X15.69623 Y56.23792
G01 X15.74464 Y56.24031
G01 X15.75691 Y56.24988
G01 X15.79427 Y56.28034
G01 X15.86666 Y56.34204
G01 X15.96544 Y56.44173
G01 X15.97972 Y56.45895
G01 X15.98002 Y56.45926
G01 X16.02805 Y56.51219
G01 X16.13100 Y56.63061
G01 X16.17872 Y56.68036
G01 X16.18817 Y56.68930
G01 X16.30057 Y56.77912
G01 X16.33775 Y56.80686
G01 X16.35757 Y56.81793
G01 X16.49567 Y56.89220
G01 X16.50519 Y56.89723
G01 X16.55983 Y56.91742
G01 X16.68540 Y56.95801
G01 X16.70969 Y56.96370
G01 X16.77748 Y56.97610
G01 X16.87293 Y56.98877
G01 X16.93349 Y56.99174
G01 X17.00232 Y56.99174
G01 X17.06285 Y56.98877
G01 X17.15838 Y56.97610
G01 X17.22620 Y56.96370
G01 X17.25045 Y56.95801
G01 X17.37603 Y56.91742
G01 X17.43067 Y56.89723
G01 X17.44011 Y56.89223
G01 X17.57826 Y56.81796
G01 X17.59810 Y56.80688
G01 X17.63531 Y56.77909
G01 X17.70829 Y56.72072
G01 X17.74763 Y56.68928
G01 X17.75711 Y56.68034
G01 X17.80483 Y56.63061
G01 X17.88436 Y56.53914
G01 X17.90752 Y56.51199
G01 X17.95515 Y56.45895
G01 X17.96015 Y56.45347
G01 X18.00280 Y56.40688
G01 X18.06927 Y56.34214
G01 X18.14057 Y56.27996
G01 X18.19114 Y56.24041
G01 X18.23623 Y56.23792
G01 X18.28464 Y56.24031
G01 X18.29691 Y56.24988
G01 X18.33427 Y56.28034
G01 X18.40666 Y56.34204
G01 X18.50547 Y56.44173
G01 X18.51974 Y56.45895
G01 X18.56808 Y56.51219
G01 X18.67100 Y56.63061
G01 X18.71872 Y56.68034
G01 X18.72822 Y56.68930
G01 X18.84057 Y56.77912
G01 X18.87775 Y56.80686
G01 X18.89757 Y56.81793
G01 X19.03567 Y56.89220
G01 X19.04519 Y56.89723
G01 X19.09983 Y56.91742
G01 X19.22540 Y56.95801
G01 X19.24969 Y56.96370
G01 X19.31748 Y56.97610
G01 X19.41293 Y56.98877
G01 X19.47351 Y56.99174
G01 X19.54232 Y56.99174
G01 X19.60290 Y56.98877
G01 X19.69838 Y56.97610
G01 X19.76620 Y56.96370
G01 X19.79045 Y56.95801
G01 X19.91603 Y56.91742
G01 X19.97067 Y56.89723
G01 X19.98014 Y56.89223
G01 X20.11826 Y56.81796
G01 X20.13810 Y56.80688
G01 X20.17531 Y56.77909
G01 X20.24829 Y56.72072
G01 X20.28763 Y56.68928
G01 X20.29713 Y56.68034
G01 X20.34483 Y56.63061
G01 X20.42436 Y56.53914
G01 X20.44752 Y56.51199
G01 X20.49515 Y56.45895
G01 X20.50015 Y56.45347
G01 X20.54280 Y56.40688
G01 X20.60927 Y56.34214
G01 X20.68057 Y56.27996
G01 X20.73114 Y56.24041
G01 X20.77623 Y56.23792
G01 X20.82464 Y56.24031
G01 X20.83691 Y56.24988
G01 X20.87427 Y56.28034
G01 X20.94666 Y56.34204
G01 X21.04547 Y56.44173
G01 X21.05974 Y56.45895
G01 X21.10808 Y56.51219
G01 X21.21100 Y56.63061
G01 X21.25872 Y56.68034
G01 X21.26822 Y56.68930
G01 X21.38057 Y56.77912
G01 X21.41775 Y56.80686
G01 X21.43757 Y56.81793
G01 X21.57567 Y56.89220
G01 X21.58519 Y56.89723
G01 X21.63983 Y56.91742
G01 X21.76540 Y56.95801
G01 X21.78969 Y56.96370
G01 X21.85748 Y56.97610
G01 X21.95293 Y56.98877
G01 X22.01351 Y56.99174
G01 X22.08232 Y56.99174
G01 X22.14290 Y56.98877
G01 X22.23838 Y56.97610
G01 X22.30620 Y56.96370
G01 X22.33045 Y56.95801
G01 X22.45603 Y56.91742
G01 X22.51067 Y56.89723
G01 X22.52014 Y56.89223
G01 X22.65826 Y56.81796
G01 X22.67810 Y56.80688
G01 X22.71531 Y56.77909
G01 X22.78829 Y56.72072
G01 X22.82763 Y56.68928
G01 X22.83713 Y56.68034
G01 X22.88483 Y56.63061
G01 X22.95580 Y56.54897
G01 X22.98669 Y56.50688
G01 X23.02258 Y56.45225
G01 X23.05958 Y56.38981
G01 X23.09644 Y56.31389
G01 X23.12347 Y56.25052
G01 X23.13624 Y56.21595
G01 X23.16842 Y56.10025
G01 X23.18361 Y56.03297
G01 X23.18379 Y56.03188
G01 X23.19786 Y55.87678
G01 X23.20015 Y55.84232
G01 X23.19786 Y55.80787
G01 X23.18382 Y55.65278
G01 X23.18361 Y55.65169
G01 X23.16842 Y55.58438
G01 X23.13624 Y55.46871
G01 X23.12347 Y55.43414
G01 X23.09644 Y55.37077
G01 X23.05958 Y55.29485
G01 X23.02258 Y55.23241
G01 X22.98465 Y55.17501
G01 X22.95580 Y55.13569
G01 X22.88483 Y55.05405
G01 X22.83713 Y55.00432
G01 X22.82763 Y54.99535
G01 X22.71531 Y54.90556
G01 X22.67810 Y54.87778
G01 X22.65832 Y54.86673
G01 X22.55583 Y54.81161
G01 X22.51534 Y54.80148
G01 X22.44955 Y54.78834
G01 X22.29276 Y54.76510
G01 X22.23337 Y54.75924
G01 X22.07655 Y54.75154
G01 X22.01928 Y54.75154
G01 X21.86246 Y54.75924
G01 X21.80312 Y54.76510
G01 X21.64628 Y54.78834
G01 X21.58047 Y54.80148
G01 X21.54003 Y54.81161
G01 X21.43752 Y54.86675
G01 X21.41775 Y54.87778
G01 X21.38057 Y54.90554
G01 X21.26822 Y54.99535
G01 X21.25872 Y55.00432
G01 X21.21100 Y55.05405
G01 X21.13147 Y55.14554
G01 X21.10831 Y55.17267
G01 X21.06063 Y55.22573
G01 X21.05568 Y55.23119
G01 X21.01303 Y55.27778
G01 X20.94651 Y55.34255
G01 X20.87536 Y55.40462
G01 X20.82466 Y55.44427
G01 X20.77960 Y55.44674
G01 X20.73122 Y55.44435
G01 X20.71892 Y55.43475
G01 X20.68164 Y55.40437
G01 X20.60915 Y55.34260
G01 X20.51029 Y55.24283
G01 X20.49581 Y55.22535
G01 X20.44778 Y55.17247
G01 X20.42792 Y55.14961
G01 X20.34483 Y55.05405
G01 X20.29713 Y55.00432
G01 X20.28763 Y54.99535
G01 X20.17531 Y54.90556
G01 X20.13810 Y54.87778
G01 X20.11832 Y54.86673
G01 X20.01583 Y54.81161
G01 X19.97534 Y54.80148
G01 X19.90955 Y54.78834
G01 X19.75276 Y54.76510
G01 X19.69337 Y54.75924
G01 X19.53655 Y54.75154
G01 X19.47928 Y54.75154
G01 X19.32246 Y54.75924
G01 X19.26312 Y54.76510
G01 X19.10628 Y54.78834
G01 X19.04047 Y54.80148
G01 X19.00003 Y54.81161
G01 X18.89752 Y54.86675
G01 X18.87775 Y54.87778
G01 X18.84057 Y54.90554
G01 X18.72822 Y54.99535
G01 X18.71872 Y55.00432
G01 X18.67100 Y55.05405
G01 X18.59147 Y55.14554
G01 X18.56831 Y55.17267
G01 X18.52063 Y55.22573
G01 X18.51568 Y55.23119
G01 X18.47303 Y55.27778
G01 X18.40651 Y55.34255
G01 X18.33536 Y55.40462
G01 X18.28466 Y55.44427
G01 X18.23960 Y55.44674
G01 X18.19122 Y55.44435
G01 X18.17892 Y55.43475
G01 X18.14164 Y55.40437
G01 X18.06915 Y55.34260
G01 X17.97029 Y55.24283
G01 X17.95581 Y55.22535
G01 X17.90778 Y55.17247
G01 X17.88792 Y55.14961
G01 X17.80483 Y55.05405
G01 X17.75711 Y55.00432
G01 X17.74763 Y54.99535
G01 X17.63531 Y54.90556
G01 X17.59810 Y54.87778
G01 X17.57832 Y54.86673
G01 X17.47583 Y54.81161
G01 X17.43534 Y54.80148
G01 X17.36955 Y54.78834
G01 X17.21276 Y54.76510
G01 X17.15337 Y54.75924
G01 X16.99653 Y54.75154
G01 X16.93928 Y54.75154
G01 X16.78243 Y54.75924
G01 X16.72312 Y54.76510
G01 X16.56628 Y54.78834
G01 X16.50047 Y54.80148
G01 X16.46003 Y54.81161
G01 X16.35752 Y54.86675
G01 X16.33775 Y54.87780
G01 X16.30057 Y54.90554
G01 X16.18817 Y54.99535
G01 X16.17872 Y55.00429
G01 X16.13100 Y55.05405
G01 X16.05162 Y55.14532
G01 X16.02831 Y55.17267
G01 X15.98060 Y55.22573
G01 X15.97568 Y55.23119
G01 X15.93301 Y55.27778
G01 X15.86651 Y55.34255
G01 X15.79536 Y55.40462
G01 X15.74464 Y55.44427
G01 X15.69960 Y55.44674
G01 X15.65119 Y55.44435
G01 X15.63892 Y55.43475
G01 X15.60164 Y55.40437
G01 X15.52915 Y55.34260
G01 X15.43029 Y55.24283
G01 X15.41601 Y55.22558
G01 X15.41578 Y55.22535
G01 X15.36778 Y55.17247
G01 X15.34761 Y55.14928
G01 X15.26483 Y55.05405
G01 X15.21713 Y55.00432
G01 X15.20763 Y54.99535
G01 X15.09531 Y54.90556
G01 X15.05810 Y54.87778
G01 X15.03832 Y54.86673
G01 X14.93583 Y54.81161
G01 X14.89534 Y54.80148
G01 X14.82955 Y54.78834
G01 X14.67276 Y54.76510
G01 X14.61337 Y54.75924
G01 X14.45655 Y54.75154
G01 X14.39928 Y54.75154
G01 X14.24246 Y54.75924
G01 X14.18312 Y54.76510
G01 X14.02628 Y54.78834
G01 X13.96047 Y54.80148
G01 X13.92003 Y54.81161
G01 X13.81752 Y54.86675
G01 X13.79775 Y54.87778
G01 X13.76057 Y54.90554
G01 X13.64822 Y54.99535
G01 X13.63872 Y55.00432
G01 X13.59100 Y55.05405
G01 X13.51147 Y55.14554
G01 X13.48831 Y55.17267
G01 X13.44063 Y55.22573
G01 X13.43568 Y55.23119
G01 X13.39303 Y55.27778
G01 X13.32651 Y55.34255
G01 X13.25536 Y55.40462
G01 X13.20466 Y55.44427
G01 X13.15960 Y55.44674
G01 X13.11122 Y55.44435
G01 X13.09892 Y55.43475
G01 X13.06164 Y55.40437
G01 X12.98915 Y55.34260
G01 X12.89029 Y55.24283
G01 X12.87581 Y55.22535
G01 X12.82778 Y55.17247
G01 X12.80792 Y55.14961
G01 X12.72483 Y55.05405
G01 X12.67713 Y55.00432
G01 X12.66763 Y54.99535
G01 X12.55531 Y54.90556
G01 X12.51810 Y54.87778
G01 X12.49832 Y54.86673
G01 X12.39583 Y54.81161
G01 X12.35534 Y54.80148
G01 X12.28955 Y54.78834
G01 X12.13276 Y54.76510
G01 X12.07337 Y54.75924
G01 X11.91655 Y54.75154
G01 X11.85928 Y54.75154
G01 X11.70246 Y54.75924
G01 X11.64312 Y54.76510
G01 X11.48628 Y54.78834
G01 X11.42047 Y54.80148
G01 X11.38003 Y54.81161
G01 X11.27752 Y54.86675
G01 X11.25775 Y54.87778
G01 X11.22057 Y54.90554
G01 X11.10822 Y54.99535
G01 X11.09872 Y55.00432
G01 X11.05100 Y55.05405
G01 X10.97147 Y55.14554
G01 X10.94831 Y55.17267
G01 X10.90063 Y55.22573
G01 X10.89568 Y55.23119
G01 X10.85303 Y55.27778
G01 X10.78651 Y55.34255
G01 X10.71536 Y55.40462
G01 X10.66466 Y55.44427
G01 X10.61960 Y55.44674
G01 X10.57122 Y55.44435
G01 X10.55892 Y55.43475
G01 X10.52164 Y55.40437
G01 X10.44915 Y55.34260
G01 X10.35029 Y55.24283
G01 X10.33581 Y55.22535
G01 X10.28778 Y55.17247
G01 X10.26792 Y55.14961
G01 X10.18483 Y55.05405
G01 X10.13713 Y55.00432
G01 X10.12763 Y54.99535
G01 X10.01531 Y54.90556
G01 X9.97810 Y54.87778
G01 X9.95832 Y54.86673
G01 X9.85583 Y54.81161
G01 X9.81534 Y54.80148
G01 X9.74955 Y54.78834
G01 X9.59276 Y54.76510
G01 X9.53337 Y54.75924
G01 X9.37655 Y54.75154
G01 X9.31928 Y54.75154
G01 X9.16246 Y54.75924
G01 X9.10312 Y54.76510
G01 X8.94628 Y54.78834
G01 X8.88047 Y54.80148
G01 X8.84003 Y54.81161
G01 X8.73752 Y54.86675
G01 X8.71775 Y54.87778
G01 X8.68057 Y54.90554
G01 X8.56822 Y54.99535
G01 X8.55872 Y55.00432
G01 X8.51100 Y55.05405
G01 X8.43147 Y55.14554
G01 X8.40831 Y55.17267
G01 X8.36063 Y55.22573
G01 X8.35568 Y55.23119
G01 X8.31303 Y55.27778
G01 X8.24651 Y55.34255
G01 X8.17536 Y55.40462
G01 X8.12466 Y55.44427
G01 X8.07960 Y55.44674
G01 X8.03122 Y55.44435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.12466 Y55.44427 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.12466 Y55.44427
G01 X8.09441 Y55.54399
G01 X8.07793 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.61793 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.61793 Y56.05771
G01 X10.63441 Y56.14061
G01 X10.66464 Y56.24031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.57114 Y56.24041 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.57114 Y56.24041
G01 X10.60147 Y56.14061
G01 X10.61793 Y56.05771
G01 X10.61793 Y55.62670
G01 X10.60147 Y55.54399
G01 X10.57122 Y55.44435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X10.66466 Y55.44427 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X10.66466 Y55.44427
G01 X10.63441 Y55.54399
G01 X10.61793 Y55.62670
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.11122 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.11122 Y55.44435
G01 X13.14147 Y55.54399
G01 X13.15790 Y55.62670
G01 X13.15790 Y56.05771
G01 X13.14147 Y56.14061
G01 X13.11114 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.15790 Y56.05771 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.15790 Y56.05771
G01 X13.17441 Y56.14061
G01 X13.20464 Y56.24031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.80972 Y59.00464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.80972 Y59.00464
G01 X14.81198 Y58.97017
G01 X14.82605 Y58.81511
G01 X14.82623 Y58.81401
G01 X14.83763 Y58.76095
G01 X14.84141 Y58.74670
G01 X14.87360 Y58.63101
G01 X14.88637 Y58.59646
G01 X14.91340 Y58.53307
G01 X14.95025 Y58.45717
G01 X14.98726 Y58.39471
G01 X15.02518 Y58.33733
G01 X15.05404 Y58.29801
G01 X15.12501 Y58.21635
G01 X15.17276 Y58.16662
G01 X15.18223 Y58.15765
G01 X15.26366 Y58.09255
G01 X15.29458 Y58.06786
G01 X15.31203 Y58.05435
G01 X15.33181 Y58.04005
G01 X15.35157 Y58.02903
G01 X15.45759 Y57.97200
G01 X15.48967 Y57.95476
G01 X15.49917 Y57.94975
G01 X15.55386 Y57.92951
G01 X15.67936 Y57.88895
G01 X15.70369 Y57.88326
G01 X15.77141 Y57.87089
G01 X15.86691 Y57.85821
G01 X15.92747 Y57.85524
G01 X15.99635 Y57.85524
G01 X16.05691 Y57.85821
G01 X16.15241 Y57.87089
G01 X16.22013 Y57.88326
G01 X16.24446 Y57.88895
G01 X16.36999 Y57.92951
G01 X16.42465 Y57.94973
G01 X16.43417 Y57.95476
G01 X16.57227 Y58.02903
G01 X16.59206 Y58.04010
G01 X16.62927 Y58.06784
G01 X16.74159 Y58.15765
G01 X16.75109 Y58.16662
G01 X16.79881 Y58.21635
G01 X16.86981 Y58.29801
G01 X16.89864 Y58.33733
G01 X16.93656 Y58.39471
G01 X16.97359 Y58.45717
G01 X17.01045 Y58.53307
G01 X17.03747 Y58.59644
G01 X17.05025 Y58.63101
G01 X17.08243 Y58.74670
G01 X17.09762 Y58.81401
G01 X17.09780 Y58.81508
G01 X17.11184 Y58.97017
G01 X17.11411 Y59.00457
G01 X17.11360 Y59.01561
G01 X17.11184 Y59.03908
G01 X17.09780 Y59.19420
G01 X17.09762 Y59.19527
G01 X17.08243 Y59.26258
G01 X17.05025 Y59.37828
G01 X17.03747 Y59.41282
G01 X17.01047 Y59.47617
G01 X16.97359 Y59.55211
G01 X16.93661 Y59.61455
G01 X16.89864 Y59.67195
G01 X16.86981 Y59.71127
G01 X16.79881 Y59.79293
G01 X16.75104 Y59.84269
G01 X16.74159 Y59.85163
G01 X16.67451 Y59.90525
G01 X16.62924 Y59.94144
G01 X16.59211 Y59.96916
G01 X16.57230 Y59.98021
G01 X16.43420 Y60.05450
G01 X16.42465 Y60.05955
G01 X16.36999 Y60.07977
G01 X16.24446 Y60.12034
G01 X16.22013 Y60.12603
G01 X16.15238 Y60.13842
G01 X16.05691 Y60.15107
G01 X15.99633 Y60.15404
G01 X15.92752 Y60.15404
G01 X15.86691 Y60.15107
G01 X15.77144 Y60.13842
G01 X15.70369 Y60.12603
G01 X15.67936 Y60.12034
G01 X15.55386 Y60.07977
G01 X15.49920 Y60.05955
G01 X15.48965 Y60.05450
G01 X15.35152 Y59.98021
G01 X15.33176 Y59.96918
G01 X15.29460 Y59.94144
G01 X15.18223 Y59.85163
G01 X15.17278 Y59.84269
G01 X15.12485 Y59.79273
G01 X15.05401 Y59.71127
G01 X15.03522 Y59.68564
G01 X15.02518 Y59.67198
G01 X14.98724 Y59.61455
G01 X14.95028 Y59.55211
G01 X14.91337 Y59.47617
G01 X14.88637 Y59.41282
G01 X14.87360 Y59.37823
G01 X14.84144 Y59.26258
G01 X14.82623 Y59.19527
G01 X14.82605 Y59.19418
G01 X14.81198 Y59.03908
G01 X14.80972 Y59.00464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.36572 Y59.04465 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.36572 Y59.04465
G01 X18.36798 Y59.01018
G01 X18.38205 Y58.85511
G01 X18.38223 Y58.85402
G01 X18.39741 Y58.78671
G01 X18.42960 Y58.67101
G01 X18.44237 Y58.63647
G01 X18.46940 Y58.57307
G01 X18.50628 Y58.49715
G01 X18.54326 Y58.43472
G01 X18.58118 Y58.37731
G01 X18.61001 Y58.33802
G01 X18.68101 Y58.25636
G01 X18.72876 Y58.20662
G01 X18.73823 Y58.19766
G01 X18.84992 Y58.10838
G01 X18.85058 Y58.10784
G01 X18.86493 Y58.09669
G01 X18.88779 Y58.08008
G01 X18.90757 Y58.06903
G01 X19.04567 Y57.99476
G01 X19.05520 Y57.98973
G01 X19.10981 Y57.96954
G01 X19.23539 Y57.92895
G01 X19.25964 Y57.92326
G01 X19.32746 Y57.91087
G01 X19.42294 Y57.89819
G01 X19.48352 Y57.89522
G01 X19.55233 Y57.89522
G01 X19.61291 Y57.89819
G01 X19.70838 Y57.91087
G01 X19.77620 Y57.92326
G01 X19.80046 Y57.92895
G01 X19.92604 Y57.96954
G01 X19.98065 Y57.98973
G01 X19.99017 Y57.99476
G01 X20.12827 Y58.06903
G01 X20.14808 Y58.08011
G01 X20.18527 Y58.10784
G01 X20.29761 Y58.19766
G01 X20.30709 Y58.20662
G01 X20.35484 Y58.25636
G01 X20.42583 Y58.33802
G01 X20.45466 Y58.37731
G01 X20.49258 Y58.43472
G01 X20.52959 Y58.49715
G01 X20.56645 Y58.57307
G01 X20.59347 Y58.63644
G01 X20.60625 Y58.67101
G01 X20.63843 Y58.78671
G01 X20.65362 Y58.85402
G01 X20.65380 Y58.85509
G01 X20.66787 Y59.01018
G01 X20.67013 Y59.04465
G01 X20.66787 Y59.07909
G01 X20.65380 Y59.23421
G01 X20.65362 Y59.23527
G01 X20.63843 Y59.30258
G01 X20.60625 Y59.41828
G01 X20.59347 Y59.45282
G01 X20.56647 Y59.51617
G01 X20.52959 Y59.59212
G01 X20.49261 Y59.65455
G01 X20.45464 Y59.71201
G01 X20.42581 Y59.75127
G01 X20.35481 Y59.83294
G01 X20.30711 Y59.88264
G01 X20.29761 Y59.89164
G01 X20.18527 Y59.98142
G01 X20.14811 Y60.00916
G01 X20.12832 Y60.02021
G01 X19.99020 Y60.09451
G01 X19.98065 Y60.09956
G01 X19.92599 Y60.11978
G01 X19.80046 Y60.16034
G01 X19.77615 Y60.16603
G01 X19.70838 Y60.17843
G01 X19.61293 Y60.19108
G01 X19.55233 Y60.19405
G01 X19.48352 Y60.19405
G01 X19.42291 Y60.19108
G01 X19.32746 Y60.17843
G01 X19.25969 Y60.16603
G01 X19.23539 Y60.16034
G01 X19.10986 Y60.11978
G01 X19.05520 Y60.09956
G01 X19.04565 Y60.09451
G01 X18.90752 Y60.02021
G01 X18.88776 Y60.00919
G01 X18.85058 Y59.98142
G01 X18.73823 Y59.89161
G01 X18.72873 Y59.88267
G01 X18.71375 Y59.86806
G01 X18.68103 Y59.83294
G01 X18.61001 Y59.75127
G01 X18.58121 Y59.71201
G01 X18.56348 Y59.68671
G01 X18.54324 Y59.65455
G01 X18.50628 Y59.59212
G01 X18.46937 Y59.51617
G01 X18.44237 Y59.45282
G01 X18.42962 Y59.41828
G01 X18.39744 Y59.30258
G01 X18.38223 Y59.23527
G01 X18.38205 Y59.23418
G01 X18.36798 Y59.07909
G01 X18.36572 Y59.04465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.36572 Y64.04464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.36572 Y64.04464
G01 X18.36798 Y64.07910
G01 X18.38205 Y64.23417
G01 X18.38223 Y64.23526
G01 X18.39741 Y64.30257
G01 X18.42960 Y64.41827
G01 X18.44237 Y64.45282
G01 X18.46940 Y64.51621
G01 X18.50628 Y64.59213
G01 X18.54326 Y64.65457
G01 X18.58118 Y64.71197
G01 X18.59907 Y64.73636
G01 X18.61001 Y64.75124
G01 X18.68101 Y64.83293
G01 X18.68563 Y64.83818
G01 X18.72876 Y64.88266
G01 X18.73823 Y64.89163
G01 X18.85058 Y64.98144
G01 X18.88776 Y65.00920
G01 X18.90757 Y65.02025
G01 X19.04567 Y65.09452
G01 X19.05517 Y65.09955
G01 X19.10981 Y65.11974
G01 X19.23539 Y65.16033
G01 X19.25964 Y65.16602
G01 X19.32746 Y65.17842
G01 X19.42291 Y65.19107
G01 X19.48352 Y65.19404
G01 X19.55233 Y65.19404
G01 X19.61293 Y65.19107
G01 X19.70838 Y65.17842
G01 X19.77620 Y65.16602
G01 X19.80046 Y65.16033
G01 X19.92604 Y65.11974
G01 X19.98067 Y65.09955
G01 X19.99017 Y65.09452
G01 X20.12827 Y65.02025
G01 X20.14811 Y65.00918
G01 X20.18527 Y64.98144
G01 X20.25880 Y64.92266
G01 X20.29759 Y64.89165
G01 X20.30709 Y64.88266
G01 X20.35484 Y64.83293
G01 X20.42583 Y64.75127
G01 X20.45466 Y64.71197
G01 X20.49258 Y64.65457
G01 X20.52959 Y64.59211
G01 X20.56645 Y64.51621
G01 X20.59347 Y64.45284
G01 X20.60625 Y64.41827
G01 X20.63843 Y64.30257
G01 X20.65362 Y64.23526
G01 X20.65380 Y64.23420
G01 X20.66787 Y64.07910
G01 X20.67013 Y64.04464
G01 X20.66787 Y64.01019
G01 X20.65380 Y63.85508
G01 X20.65362 Y63.85401
G01 X20.63843 Y63.78670
G01 X20.60625 Y63.67100
G01 X20.59347 Y63.63646
G01 X20.56647 Y63.57311
G01 X20.52959 Y63.49717
G01 X20.49261 Y63.43473
G01 X20.45464 Y63.37728
G01 X20.42581 Y63.33801
G01 X20.35481 Y63.25635
G01 X20.30711 Y63.20664
G01 X20.29761 Y63.19765
G01 X20.18527 Y63.10786
G01 X20.14808 Y63.08012
G01 X20.12832 Y63.06907
G01 X19.99020 Y62.99478
G01 X19.98065 Y62.98972
G01 X19.92599 Y62.96951
G01 X19.80046 Y62.92894
G01 X19.77615 Y62.92325
G01 X19.70838 Y62.91086
G01 X19.61293 Y62.89821
G01 X19.55233 Y62.89524
G01 X19.48352 Y62.89524
G01 X19.42291 Y62.89821
G01 X19.32746 Y62.91086
G01 X19.25969 Y62.92325
G01 X19.23539 Y62.92894
G01 X19.10986 Y62.96951
G01 X19.05520 Y62.98972
G01 X19.05304 Y62.99084
G01 X19.04565 Y62.99478
G01 X18.98690 Y63.02635
G01 X18.90752 Y63.06907
G01 X18.88776 Y63.08010
G01 X18.85058 Y63.10786
G01 X18.73823 Y63.19765
G01 X18.72873 Y63.20664
G01 X18.68103 Y63.25635
G01 X18.61004 Y63.33801
G01 X18.58121 Y63.37728
G01 X18.54324 Y63.43473
G01 X18.50625 Y63.49717
G01 X18.46937 Y63.57311
G01 X18.44237 Y63.63646
G01 X18.42960 Y63.67100
G01 X18.39744 Y63.78670
G01 X18.38223 Y63.85401
G01 X18.38205 Y63.85510
G01 X18.36798 Y64.01019
G01 X18.36572 Y64.04464
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.48097 Y70.15115 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.48097 Y70.15115
G01 X24.48074 Y70.15179
G01 X24.46492 Y70.20383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.44617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.44617 Y70.15031
G01 X24.48026 Y70.15120
G01 X24.48097 Y70.15115
G01 X24.53822 Y70.10802
G01 X24.56563 Y70.08880
G01 X24.70070 Y69.97208
G01 X24.71772 Y69.95379
G01 X24.75072 Y69.92055
G01 X24.75135 Y69.91996
G01 X24.80820 Y69.85961
G01 X24.86210 Y69.79525
G01 X24.88490 Y69.76929
G01 X24.91086 Y69.74648
G01 X25.00390 Y69.66858
G01 X25.02892 Y69.64762
G01 X25.03926 Y69.64028
G01 X25.07335 Y69.61747
G01 X25.09727 Y69.60312
G01 X25.19006 Y69.54996
G01 X25.24414 Y69.52438
G01 X25.30774 Y69.49804
G01 X25.36405 Y69.47790
G01 X25.46725 Y69.44988
G01 X25.53456 Y69.43510
G01 X25.54703 Y69.43302
G01 X25.70047 Y69.41943
G01 X25.73494 Y69.41722
G01 X25.76938 Y69.41943
G01 X25.92283 Y69.43302
G01 X25.93527 Y69.43510
G01 X26.00258 Y69.44988
G01 X26.10581 Y69.47790
G01 X26.16209 Y69.49804
G01 X26.22572 Y69.52438
G01 X26.27977 Y69.54996
G01 X26.37258 Y69.60315
G01 X26.43060 Y69.64028
G01 X26.44091 Y69.64762
G01 X26.55899 Y69.74648
G01 X26.58495 Y69.76931
G01 X26.60776 Y69.79525
G01 X26.66169 Y69.85964
G01 X26.71851 Y69.91996
G01 X26.73994 Y69.94023
G01 X26.77085 Y69.97117
G01 X26.78411 Y69.98527
G01 X26.90296 Y70.08948
G01 X26.98617 Y70.15031
G01 X26.98851 Y70.15202
G01 X26.98940 Y70.15268
G01 X27.00492 Y70.20383
G01 X27.00492 Y71.03469
G01 X26.98914 Y71.08684
G01 X26.95239 Y71.17559
G01 X26.87383 Y71.32252
G01 X26.82046 Y71.40241
G01 X26.71475 Y71.53121
G01 X26.64683 Y71.59913
G01 X26.51802 Y71.70485
G01 X26.43817 Y71.75821
G01 X26.29120 Y71.83675
G01 X26.20245 Y71.87350
G01 X26.04299 Y71.92189
G01 X25.94878 Y71.94063
G01 X25.78297 Y71.95697
G01 X25.68691 Y71.95697
G01 X25.52107 Y71.94063
G01 X25.42686 Y71.92189
G01 X25.26743 Y71.87350
G01 X25.17868 Y71.83675
G01 X25.03172 Y71.75821
G01 X24.95186 Y71.70485
G01 X24.82306 Y71.59913
G01 X24.75511 Y71.53121
G01 X24.64942 Y71.40241
G01 X24.59606 Y71.32252
G01 X24.51749 Y71.17559
G01 X24.48074 Y71.08684
G01 X24.46492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.92492 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.92492 Y70.20383
G01 X21.94074 Y70.15179
G01 X21.94097 Y70.15115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.90617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.90617 Y70.15031
G01 X21.94026 Y70.15120
G01 X21.94097 Y70.15115
G01 X21.99822 Y70.10802
G01 X22.02563 Y70.08880
G01 X22.16070 Y69.97208
G01 X22.17772 Y69.95379
G01 X22.21072 Y69.92055
G01 X22.21135 Y69.91996
G01 X22.26820 Y69.85961
G01 X22.32210 Y69.79525
G01 X22.34491 Y69.76929
G01 X22.37086 Y69.74648
G01 X22.46390 Y69.66858
G01 X22.48892 Y69.64762
G01 X22.49926 Y69.64028
G01 X22.53335 Y69.61747
G01 X22.55727 Y69.60312
G01 X22.65006 Y69.54996
G01 X22.70414 Y69.52438
G01 X22.76774 Y69.49804
G01 X22.82405 Y69.47790
G01 X22.92725 Y69.44988
G01 X22.99456 Y69.43510
G01 X23.00703 Y69.43302
G01 X23.16047 Y69.41943
G01 X23.19494 Y69.41722
G01 X23.22938 Y69.41943
G01 X23.38283 Y69.43302
G01 X23.39527 Y69.43510
G01 X23.46258 Y69.44988
G01 X23.56581 Y69.47790
G01 X23.62209 Y69.49804
G01 X23.68572 Y69.52438
G01 X23.73977 Y69.54996
G01 X23.83258 Y69.60315
G01 X23.89060 Y69.64028
G01 X23.90091 Y69.64762
G01 X24.01899 Y69.74648
G01 X24.04495 Y69.76931
G01 X24.06776 Y69.79525
G01 X24.12169 Y69.85964
G01 X24.17851 Y69.91996
G01 X24.19994 Y69.94023
G01 X24.23085 Y69.97117
G01 X24.24411 Y69.98527
G01 X24.36296 Y70.08948
G01 X24.44617 Y70.15031
G01 X24.44851 Y70.15202
G01 X24.44940 Y70.15268
G01 X24.46492 Y70.20383
G01 X24.46492 Y71.03469
G01 X24.44914 Y71.08684
G01 X24.41239 Y71.17559
G01 X24.33383 Y71.32252
G01 X24.28046 Y71.40241
G01 X24.17475 Y71.53121
G01 X24.10683 Y71.59913
G01 X23.97802 Y71.70485
G01 X23.89817 Y71.75821
G01 X23.75120 Y71.83675
G01 X23.66245 Y71.87350
G01 X23.50299 Y71.92189
G01 X23.40878 Y71.94063
G01 X23.24297 Y71.95697
G01 X23.14691 Y71.95697
G01 X22.98107 Y71.94063
G01 X22.88686 Y71.92189
G01 X22.72743 Y71.87350
G01 X22.63868 Y71.83675
G01 X22.49172 Y71.75821
G01 X22.41186 Y71.70485
G01 X22.28306 Y71.59913
G01 X22.21511 Y71.53121
G01 X22.10942 Y71.40241
G01 X22.05606 Y71.32252
G01 X21.97749 Y71.17559
G01 X21.94074 Y71.08684
G01 X21.92492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.38492 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.38492 Y70.20383
G01 X19.40074 Y70.15179
G01 X19.40097 Y70.15115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.36617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.36617 Y70.15031
G01 X19.40026 Y70.15120
G01 X19.40097 Y70.15115
G01 X19.45822 Y70.10802
G01 X19.48563 Y70.08880
G01 X19.62070 Y69.97208
G01 X19.63772 Y69.95379
G01 X19.67072 Y69.92055
G01 X19.67135 Y69.91996
G01 X19.72820 Y69.85961
G01 X19.78210 Y69.79525
G01 X19.80490 Y69.76929
G01 X19.83086 Y69.74648
G01 X19.92390 Y69.66858
G01 X19.94892 Y69.64762
G01 X19.95926 Y69.64028
G01 X19.99335 Y69.61747
G01 X20.01727 Y69.60312
G01 X20.11006 Y69.54996
G01 X20.16414 Y69.52438
G01 X20.22774 Y69.49804
G01 X20.28405 Y69.47790
G01 X20.38725 Y69.44988
G01 X20.45456 Y69.43510
G01 X20.46703 Y69.43302
G01 X20.62047 Y69.41943
G01 X20.65494 Y69.41722
G01 X20.68938 Y69.41943
G01 X20.84283 Y69.43302
G01 X20.85527 Y69.43510
G01 X20.92258 Y69.44988
G01 X21.02581 Y69.47790
G01 X21.08209 Y69.49804
G01 X21.14572 Y69.52438
G01 X21.19977 Y69.54996
G01 X21.29258 Y69.60315
G01 X21.35060 Y69.64028
G01 X21.36091 Y69.64762
G01 X21.47899 Y69.74648
G01 X21.50495 Y69.76931
G01 X21.52776 Y69.79525
G01 X21.58169 Y69.85964
G01 X21.63851 Y69.91996
G01 X21.65994 Y69.94023
G01 X21.69085 Y69.97117
G01 X21.70411 Y69.98527
G01 X21.82296 Y70.08948
G01 X21.90617 Y70.15031
G01 X21.90851 Y70.15202
G01 X21.90940 Y70.15268
G01 X21.92492 Y70.20383
G01 X21.92492 Y71.03469
G01 X21.90914 Y71.08684
G01 X21.87239 Y71.17559
G01 X21.79383 Y71.32252
G01 X21.74046 Y71.40241
G01 X21.63475 Y71.53121
G01 X21.56683 Y71.59913
G01 X21.43802 Y71.70485
G01 X21.35817 Y71.75821
G01 X21.21120 Y71.83675
G01 X21.12245 Y71.87350
G01 X20.96299 Y71.92189
G01 X20.86878 Y71.94063
G01 X20.70297 Y71.95697
G01 X20.60691 Y71.95697
G01 X20.44107 Y71.94063
G01 X20.34686 Y71.92189
G01 X20.18743 Y71.87350
G01 X20.09868 Y71.83675
G01 X19.95172 Y71.75821
G01 X19.87186 Y71.70485
G01 X19.74306 Y71.59913
G01 X19.67511 Y71.53121
G01 X19.56942 Y71.40241
G01 X19.51606 Y71.32252
G01 X19.43749 Y71.17559
G01 X19.40074 Y71.08684
G01 X19.38492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.84489 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.84489 Y70.20383
G01 X16.86071 Y70.15179
G01 X16.86094 Y70.15115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.82617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.82617 Y70.15031
G01 X16.86026 Y70.15120
G01 X16.86094 Y70.15115
G01 X16.91822 Y70.10805
G01 X16.94560 Y70.08880
G01 X17.08070 Y69.97208
G01 X17.09772 Y69.95379
G01 X17.13072 Y69.92055
G01 X17.13135 Y69.91996
G01 X17.18817 Y69.85961
G01 X17.24210 Y69.79525
G01 X17.26490 Y69.76929
G01 X17.29086 Y69.74648
G01 X17.38388 Y69.66858
G01 X17.40895 Y69.64760
G01 X17.41926 Y69.64028
G01 X17.45332 Y69.61747
G01 X17.47725 Y69.60312
G01 X17.57004 Y69.54996
G01 X17.62411 Y69.52438
G01 X17.68774 Y69.49804
G01 X17.74403 Y69.47790
G01 X17.84725 Y69.44988
G01 X17.91456 Y69.43510
G01 X17.92703 Y69.43302
G01 X18.08047 Y69.41943
G01 X18.11494 Y69.41722
G01 X18.14938 Y69.41943
G01 X18.30283 Y69.43302
G01 X18.31527 Y69.43510
G01 X18.38258 Y69.44988
G01 X18.48581 Y69.47790
G01 X18.54209 Y69.49804
G01 X18.60572 Y69.52438
G01 X18.65977 Y69.54996
G01 X18.75258 Y69.60315
G01 X18.81060 Y69.64028
G01 X18.82091 Y69.64762
G01 X18.93899 Y69.74648
G01 X18.96495 Y69.76931
G01 X18.98776 Y69.79525
G01 X19.04169 Y69.85964
G01 X19.09851 Y69.91996
G01 X19.11994 Y69.94023
G01 X19.15085 Y69.97117
G01 X19.16411 Y69.98527
G01 X19.28296 Y70.08948
G01 X19.36617 Y70.15031
G01 X19.36851 Y70.15202
G01 X19.36940 Y70.15268
G01 X19.38492 Y70.20383
G01 X19.38492 Y71.03469
G01 X19.36914 Y71.08684
G01 X19.33239 Y71.17559
G01 X19.25383 Y71.32252
G01 X19.20046 Y71.40241
G01 X19.09475 Y71.53121
G01 X19.02683 Y71.59913
G01 X18.89802 Y71.70485
G01 X18.81817 Y71.75821
G01 X18.67120 Y71.83675
G01 X18.58245 Y71.87350
G01 X18.42299 Y71.92189
G01 X18.32878 Y71.94063
G01 X18.16297 Y71.95697
G01 X18.06691 Y71.95697
G01 X17.90107 Y71.94063
G01 X17.80686 Y71.92189
G01 X17.64743 Y71.87350
G01 X17.55868 Y71.83675
G01 X17.41172 Y71.75821
G01 X17.33186 Y71.70485
G01 X17.20303 Y71.59913
G01 X17.13509 Y71.53121
G01 X17.08992 Y71.47614
G01 X17.02942 Y71.40241
G01 X16.97603 Y71.32252
G01 X16.89749 Y71.17559
G01 X16.86071 Y71.08684
G01 X16.84489 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.30492 Y70.20383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.30492 Y70.20383
G01 X14.32074 Y70.15179
G01 X14.32097 Y70.15115
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.28617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.28617 Y70.15031
G01 X14.32026 Y70.15120
G01 X14.32097 Y70.15115
G01 X14.37822 Y70.10802
G01 X14.40563 Y70.08880
G01 X14.54070 Y69.97208
G01 X14.55772 Y69.95379
G01 X14.59072 Y69.92055
G01 X14.59135 Y69.91996
G01 X14.64820 Y69.85961
G01 X14.70210 Y69.79525
G01 X14.72490 Y69.76929
G01 X14.75086 Y69.74648
G01 X14.84390 Y69.66858
G01 X14.86892 Y69.64762
G01 X14.87926 Y69.64028
G01 X14.91335 Y69.61747
G01 X14.93727 Y69.60312
G01 X15.03006 Y69.54996
G01 X15.08414 Y69.52438
G01 X15.14774 Y69.49804
G01 X15.20405 Y69.47790
G01 X15.30725 Y69.44988
G01 X15.37456 Y69.43510
G01 X15.38703 Y69.43302
G01 X15.54047 Y69.41943
G01 X15.57492 Y69.41722
G01 X15.60938 Y69.41943
G01 X15.76280 Y69.43302
G01 X15.77527 Y69.43510
G01 X15.84258 Y69.44988
G01 X15.94581 Y69.47790
G01 X16.00207 Y69.49804
G01 X16.06572 Y69.52438
G01 X16.11977 Y69.54996
G01 X16.21258 Y69.60315
G01 X16.27060 Y69.64028
G01 X16.28088 Y69.64760
G01 X16.39899 Y69.74648
G01 X16.42493 Y69.76931
G01 X16.44776 Y69.79525
G01 X16.50169 Y69.85964
G01 X16.55848 Y69.91996
G01 X16.57987 Y69.94015
G01 X16.61083 Y69.97117
G01 X16.62401 Y69.98519
G01 X16.74296 Y70.08948
G01 X16.82617 Y70.15031
G01 X16.82851 Y70.15202
G01 X16.82940 Y70.15268
G01 X16.84489 Y70.20383
G01 X16.84489 Y71.03469
G01 X16.82914 Y71.08684
G01 X16.79239 Y71.17559
G01 X16.71383 Y71.32252
G01 X16.66046 Y71.40241
G01 X16.55475 Y71.53121
G01 X16.48683 Y71.59913
G01 X16.35802 Y71.70485
G01 X16.27814 Y71.75821
G01 X16.13120 Y71.83675
G01 X16.04243 Y71.87350
G01 X15.88297 Y71.92189
G01 X15.78878 Y71.94063
G01 X15.62295 Y71.95697
G01 X15.52691 Y71.95697
G01 X15.36107 Y71.94063
G01 X15.26686 Y71.92189
G01 X15.10743 Y71.87350
G01 X15.01868 Y71.83675
G01 X14.87172 Y71.75821
G01 X14.79186 Y71.70485
G01 X14.66306 Y71.59913
G01 X14.59511 Y71.53121
G01 X14.48942 Y71.40241
G01 X14.43606 Y71.32252
G01 X14.35749 Y71.17559
G01 X14.32074 Y71.08684
G01 X14.30492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.73592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.73592 Y73.55973
G01 X16.75241 Y73.47700
G01 X16.79793 Y73.32691
G01 X16.83468 Y73.23819
G01 X16.90862 Y73.09986
G01 X16.96198 Y73.02001
G01 X17.06148 Y72.89877
G01 X17.12940 Y72.83085
G01 X17.25063 Y72.73136
G01 X17.33049 Y72.67800
G01 X17.46882 Y72.60406
G01 X17.55754 Y72.56730
G01 X17.70763 Y72.52179
G01 X17.80181 Y72.50304
G01 X17.95792 Y72.48767
G01 X18.05396 Y72.48767
G01 X18.21004 Y72.50304
G01 X18.30425 Y72.52179
G01 X18.45434 Y72.56730
G01 X18.54306 Y72.60406
G01 X18.68139 Y72.67800
G01 X18.76124 Y72.73136
G01 X18.88248 Y72.83085
G01 X18.95040 Y72.89877
G01 X19.03092 Y72.99689
G01 X19.04989 Y73.02001
G01 X19.10326 Y73.09986
G01 X19.17719 Y73.23819
G01 X19.21395 Y73.32691
G01 X19.25947 Y73.47700
G01 X19.27592 Y73.55973
G01 X19.27592 Y74.79077
G01 X19.25947 Y74.87362
G01 X19.23160 Y74.96549
G01 X19.23109 Y74.96587
G01 X19.23109 Y74.96590
G01 X19.17417 Y75.01162
G01 X19.10371 Y75.07316
G01 X19.02525 Y75.15150
G01 X18.99104 Y75.19077
G01 X18.98398 Y75.19877
G01 X18.94379 Y75.24357
G01 X18.91077 Y75.28322
G01 X18.88057 Y75.32231
G01 X18.84301 Y75.36374
G01 X18.79434 Y75.41241
G01 X18.75291 Y75.44995
G01 X18.67295 Y75.51172
G01 X18.61639 Y75.55114
G01 X18.60737 Y75.55681
G01 X18.47776 Y75.62445
G01 X18.44677 Y75.63966
G01 X18.41410 Y75.65081
G01 X18.27463 Y75.69463
G01 X18.26422 Y75.69701
G01 X18.19642 Y75.70910
G01 X18.09620 Y75.72198
G01 X18.04039 Y75.72473
G01 X17.97148 Y75.72473
G01 X17.91565 Y75.72198
G01 X17.81542 Y75.70913
G01 X17.74763 Y75.69701
G01 X17.73717 Y75.69460
G01 X17.59772 Y75.65081
G01 X17.56508 Y75.63966
G01 X17.53409 Y75.62445
G01 X17.40445 Y75.55681
G01 X17.39541 Y75.55114
G01 X17.33884 Y75.51175
G01 X17.25891 Y75.44995
G01 X17.21751 Y75.41243
G01 X17.16882 Y75.36374
G01 X17.13130 Y75.32231
G01 X17.10107 Y75.28322
G01 X17.06805 Y75.24357
G01 X17.02787 Y75.19877
G01 X17.02081 Y75.19077
G01 X16.98660 Y75.15150
G01 X16.90814 Y75.07316
G01 X16.83768 Y75.01162
G01 X16.78073 Y74.96590
G01 X16.78070 Y74.96587
G01 X16.76653 Y74.96440
G01 X16.70534 Y74.96440
G01 X16.69109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.78070 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.78070 Y74.96587
G01 X16.78025 Y74.96552
G01 X16.75241 Y74.87362
G01 X16.73592 Y74.79077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.27592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.27592 Y73.55973
G01 X19.29241 Y73.47700
G01 X19.33793 Y73.32691
G01 X19.37468 Y73.23819
G01 X19.44862 Y73.09986
G01 X19.50198 Y73.02001
G01 X19.60148 Y72.89877
G01 X19.66940 Y72.83085
G01 X19.79063 Y72.73136
G01 X19.87049 Y72.67800
G01 X20.00882 Y72.60406
G01 X20.09754 Y72.56730
G01 X20.24763 Y72.52179
G01 X20.34184 Y72.50304
G01 X20.49792 Y72.48767
G01 X20.59396 Y72.48767
G01 X20.75004 Y72.50304
G01 X20.84425 Y72.52179
G01 X20.99434 Y72.56730
G01 X21.08306 Y72.60406
G01 X21.22139 Y72.67800
G01 X21.30124 Y72.73136
G01 X21.42248 Y72.83085
G01 X21.49040 Y72.89877
G01 X21.57092 Y72.99689
G01 X21.58989 Y73.02001
G01 X21.64326 Y73.09986
G01 X21.71719 Y73.23819
G01 X21.75395 Y73.32691
G01 X21.79947 Y73.47700
G01 X21.81592 Y73.55973
G01 X21.81592 Y74.79077
G01 X21.79947 Y74.87362
G01 X21.77160 Y74.96549
G01 X21.77109 Y74.96587
G01 X21.77109 Y74.96590
G01 X21.71417 Y75.01162
G01 X21.64371 Y75.07316
G01 X21.56525 Y75.15150
G01 X21.53104 Y75.19077
G01 X21.52398 Y75.19877
G01 X21.48379 Y75.24357
G01 X21.45077 Y75.28322
G01 X21.42057 Y75.32231
G01 X21.38301 Y75.36374
G01 X21.33434 Y75.41241
G01 X21.29291 Y75.44995
G01 X21.21295 Y75.51172
G01 X21.15639 Y75.55114
G01 X21.14737 Y75.55681
G01 X21.01775 Y75.62445
G01 X20.98677 Y75.63966
G01 X20.95410 Y75.65081
G01 X20.81463 Y75.69463
G01 X20.80422 Y75.69701
G01 X20.73642 Y75.70910
G01 X20.63620 Y75.72198
G01 X20.58039 Y75.72473
G01 X20.51148 Y75.72473
G01 X20.45565 Y75.72198
G01 X20.35542 Y75.70910
G01 X20.28763 Y75.69701
G01 X20.27722 Y75.69463
G01 X20.13775 Y75.65081
G01 X20.10508 Y75.63966
G01 X20.07409 Y75.62445
G01 X19.94448 Y75.55681
G01 X19.93546 Y75.55114
G01 X19.87890 Y75.51172
G01 X19.79894 Y75.44995
G01 X19.75751 Y75.41241
G01 X19.70884 Y75.36374
G01 X19.67128 Y75.32231
G01 X19.64107 Y75.28322
G01 X19.60805 Y75.24357
G01 X19.56787 Y75.19877
G01 X19.56081 Y75.19077
G01 X19.52660 Y75.15150
G01 X19.44814 Y75.07316
G01 X19.37768 Y75.01162
G01 X19.32076 Y74.96590
G01 X19.32073 Y74.96587
G01 X19.30653 Y74.96440
G01 X19.24534 Y74.96440
G01 X19.23109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.32073 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.32073 Y74.96587
G01 X19.32027 Y74.96552
G01 X19.29241 Y74.87362
G01 X19.27592 Y74.79077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.81592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.81592 Y73.55973
G01 X21.83241 Y73.47700
G01 X21.87793 Y73.32691
G01 X21.91468 Y73.23819
G01 X21.98862 Y73.09986
G01 X22.04198 Y73.02001
G01 X22.14148 Y72.89877
G01 X22.20940 Y72.83085
G01 X22.33063 Y72.73136
G01 X22.41049 Y72.67800
G01 X22.54882 Y72.60406
G01 X22.63754 Y72.56730
G01 X22.78763 Y72.52179
G01 X22.88184 Y72.50304
G01 X23.03792 Y72.48767
G01 X23.13396 Y72.48767
G01 X23.29004 Y72.50304
G01 X23.38425 Y72.52179
G01 X23.53434 Y72.56730
G01 X23.62306 Y72.60406
G01 X23.76139 Y72.67800
G01 X23.84124 Y72.73136
G01 X23.96248 Y72.83085
G01 X24.03040 Y72.89877
G01 X24.11092 Y72.99689
G01 X24.12989 Y73.02001
G01 X24.18326 Y73.09986
G01 X24.25719 Y73.23819
G01 X24.29395 Y73.32691
G01 X24.33947 Y73.47700
G01 X24.35592 Y73.55973
G01 X24.35592 Y74.79077
G01 X24.33947 Y74.87362
G01 X24.31160 Y74.96549
G01 X24.31109 Y74.96587
G01 X24.31109 Y74.96590
G01 X24.25417 Y75.01162
G01 X24.18371 Y75.07316
G01 X24.10525 Y75.15150
G01 X24.07104 Y75.19077
G01 X24.06398 Y75.19877
G01 X24.02379 Y75.24357
G01 X23.99077 Y75.28322
G01 X23.96057 Y75.32231
G01 X23.92301 Y75.36374
G01 X23.87434 Y75.41241
G01 X23.83291 Y75.44995
G01 X23.75295 Y75.51172
G01 X23.69639 Y75.55114
G01 X23.68737 Y75.55681
G01 X23.55775 Y75.62445
G01 X23.52677 Y75.63966
G01 X23.49410 Y75.65081
G01 X23.35463 Y75.69463
G01 X23.34422 Y75.69701
G01 X23.27642 Y75.70910
G01 X23.17620 Y75.72198
G01 X23.12039 Y75.72473
G01 X23.05148 Y75.72473
G01 X22.99565 Y75.72198
G01 X22.89542 Y75.70910
G01 X22.82763 Y75.69701
G01 X22.81722 Y75.69463
G01 X22.67775 Y75.65081
G01 X22.64508 Y75.63966
G01 X22.61409 Y75.62445
G01 X22.48448 Y75.55681
G01 X22.47546 Y75.55114
G01 X22.41890 Y75.51172
G01 X22.33894 Y75.44995
G01 X22.29751 Y75.41241
G01 X22.24884 Y75.36374
G01 X22.21128 Y75.32231
G01 X22.18107 Y75.28322
G01 X22.14805 Y75.24357
G01 X22.10787 Y75.19877
G01 X22.10081 Y75.19077
G01 X22.06660 Y75.15150
G01 X21.98814 Y75.07316
G01 X21.91768 Y75.01162
G01 X21.86076 Y74.96590
G01 X21.86073 Y74.96587
G01 X21.84653 Y74.96440
G01 X21.78534 Y74.96440
G01 X21.77109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.86073 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.86073 Y74.96587
G01 X21.86027 Y74.96552
G01 X21.83241 Y74.87362
G01 X21.81592 Y74.79077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.35592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.35592 Y73.55973
G01 X24.37241 Y73.47700
G01 X24.41793 Y73.32691
G01 X24.45468 Y73.23819
G01 X24.52862 Y73.09986
G01 X24.58198 Y73.02001
G01 X24.68148 Y72.89877
G01 X24.74940 Y72.83085
G01 X24.87063 Y72.73136
G01 X24.95049 Y72.67800
G01 X25.08882 Y72.60406
G01 X25.17754 Y72.56730
G01 X25.32763 Y72.52179
G01 X25.42184 Y72.50304
G01 X25.57792 Y72.48767
G01 X25.67396 Y72.48767
G01 X25.83004 Y72.50304
G01 X25.92425 Y72.52179
G01 X26.07434 Y72.56730
G01 X26.16306 Y72.60406
G01 X26.30139 Y72.67800
G01 X26.38124 Y72.73136
G01 X26.50248 Y72.83085
G01 X26.57040 Y72.89877
G01 X26.65092 Y72.99689
G01 X26.66989 Y73.02001
G01 X26.72326 Y73.09986
G01 X26.79719 Y73.23819
G01 X26.83395 Y73.32691
G01 X26.87947 Y73.47700
G01 X26.89592 Y73.55973
G01 X26.89592 Y74.79077
G01 X26.87947 Y74.87362
G01 X26.85160 Y74.96549
G01 X26.85109 Y74.96587
G01 X26.85109 Y74.96590
G01 X26.79417 Y75.01162
G01 X26.72371 Y75.07316
G01 X26.64525 Y75.15150
G01 X26.61104 Y75.19077
G01 X26.60398 Y75.19877
G01 X26.56379 Y75.24357
G01 X26.53077 Y75.28322
G01 X26.50057 Y75.32231
G01 X26.46301 Y75.36374
G01 X26.41434 Y75.41241
G01 X26.37291 Y75.44995
G01 X26.29295 Y75.51172
G01 X26.23639 Y75.55114
G01 X26.22737 Y75.55681
G01 X26.09775 Y75.62445
G01 X26.06677 Y75.63966
G01 X26.03410 Y75.65081
G01 X25.89463 Y75.69463
G01 X25.88422 Y75.69701
G01 X25.81642 Y75.70910
G01 X25.71620 Y75.72198
G01 X25.66039 Y75.72473
G01 X25.59148 Y75.72473
G01 X25.53565 Y75.72198
G01 X25.43542 Y75.70910
G01 X25.36763 Y75.69701
G01 X25.35722 Y75.69463
G01 X25.21775 Y75.65081
G01 X25.18508 Y75.63966
G01 X25.15409 Y75.62445
G01 X25.02448 Y75.55681
G01 X25.01546 Y75.55114
G01 X24.95890 Y75.51172
G01 X24.87894 Y75.44995
G01 X24.83751 Y75.41241
G01 X24.78884 Y75.36374
G01 X24.75128 Y75.32231
G01 X24.72107 Y75.28322
G01 X24.68805 Y75.24357
G01 X24.64787 Y75.19877
G01 X24.64081 Y75.19077
G01 X24.60660 Y75.15150
G01 X24.52814 Y75.07316
G01 X24.45768 Y75.01162
G01 X24.40076 Y74.96590
G01 X24.40073 Y74.96587
G01 X24.38653 Y74.96440
G01 X24.32534 Y74.96440
G01 X24.31109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.35592 Y74.79077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.35592 Y74.79077
G01 X24.37241 Y74.87362
G01 X24.40027 Y74.96552
G01 X24.40073 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.41766 Y80.77775 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.41766 Y80.77775
G01 X19.37468 Y80.85819
G01 X19.33793 Y80.94691
G01 X19.29241 Y81.09700
G01 X19.27592 Y81.17973
G01 X19.27592 Y82.41077
G01 X19.29241 Y82.49362
G01 X19.33793 Y82.64371
G01 X19.37468 Y82.73243
G01 X19.44862 Y82.87076
G01 X19.47554 Y82.91107
G01 X19.47608 Y82.91138
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.70592 Y84.27627 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.70592 Y84.27627
G01 X19.70595 Y84.46230
G01 X19.70831 Y84.51033
G01 X19.71501 Y84.57863
G01 X19.73376 Y84.67284
G01 X19.75367 Y84.73850
G01 X19.75631 Y84.74487
G01 X19.75852 Y84.74635
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.81592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.81592 Y82.41077
G01 X21.83241 Y82.49362
G01 X21.87793 Y82.64371
G01 X21.91468 Y82.73243
G01 X21.98862 Y82.87076
G01 X22.04198 Y82.95062
G01 X22.14148 Y83.07185
G01 X22.20940 Y83.13977
G01 X22.24595 Y83.16977
G01 X22.24595 Y83.82730
G01 X22.24831 Y83.87533
G01 X22.25501 Y83.94363
G01 X22.27376 Y84.03784
G01 X22.29367 Y84.10350
G01 X22.33043 Y84.19225
G01 X22.36279 Y84.25275
G01 X22.41615 Y84.33261
G01 X22.45966 Y84.38564
G01 X22.49197 Y84.42128
G01 X23.59796 Y85.52732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.62996 Y84.51132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.62996 Y84.51132
G01 X25.03197 Y83.91328
G01 X24.99966 Y83.87764
G01 X24.95615 Y83.82461
G01 X24.90279 Y83.74475
G01 X24.87043 Y83.68425
G01 X24.83367 Y83.59550
G01 X24.81376 Y83.52984
G01 X24.79501 Y83.43563
G01 X24.78831 Y83.36733
G01 X24.78595 Y83.31930
G01 X24.78595 Y83.16977
G01 X24.74940 Y83.13977
G01 X24.68148 Y83.07185
G01 X24.58198 Y82.95062
G01 X24.52862 Y82.87076
G01 X24.45468 Y82.73243
G01 X24.41793 Y82.64371
G01 X24.37241 Y82.49362
G01 X24.35592 Y82.41077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89592 Y82.41077
G01 X26.91241 Y82.49362
G01 X26.95793 Y82.64371
G01 X26.99468 Y82.73243
G01 X27.06862 Y82.87076
G01 X27.12198 Y82.95062
G01 X27.22148 Y83.07185
G01 X27.28940 Y83.13977
G01 X27.41063 Y83.23926
G01 X27.49049 Y83.29263
G01 X27.62882 Y83.36657
G01 X27.71754 Y83.40332
G01 X27.86763 Y83.44884
G01 X27.96184 Y83.46759
G01 X28.11792 Y83.48295
G01 X28.21396 Y83.48295
G01 X28.37004 Y83.46759
G01 X28.46425 Y83.44884
G01 X28.61434 Y83.40332
G01 X28.70306 Y83.36657
G01 X28.84139 Y83.29263
G01 X28.92124 Y83.23926
G01 X29.04248 Y83.13977
G01 X29.11040 Y83.07185
G01 X29.20989 Y82.95062
G01 X29.26326 Y82.87076
G01 X29.33719 Y82.73243
G01 X29.37395 Y82.64371
G01 X29.41947 Y82.49362
G01 X29.43592 Y82.41077
G01 X29.43592 Y81.17973
G01 X29.45241 Y81.09700
G01 X29.49793 Y80.94691
G01 X29.53468 Y80.85819
G01 X29.60862 Y80.71986
G01 X29.66198 Y80.64001
G01 X29.76148 Y80.51877
G01 X29.82940 Y80.45085
G01 X29.86546 Y80.42126
G01 X29.86539 Y80.38905
G01 X29.84032 Y80.40831
G01 X29.71888 Y80.52975
G01 X29.69813 Y80.55680
G01 X29.62267 Y80.63526
G01 X29.58906 Y80.66320
G01 X29.51705 Y80.71290
G01 X29.43735 Y80.74902
G01 X29.35249 Y80.77038
G01 X29.29511 Y80.77948
G01 X29.29170 Y80.77780
G01 X29.22371 Y80.74105
G01 X29.14385 Y80.69421
G01 X29.04662 Y80.62733
G01 X29.01202 Y80.59952
G01 X28.99780 Y80.58837
G01 X28.95592 Y80.55634
G01 X28.91301 Y80.52078
G01 X28.83295 Y80.45893
G01 X28.77639 Y80.41951
G01 X28.76737 Y80.41387
G01 X28.63775 Y80.34620
G01 X28.60677 Y80.33099
G01 X28.57410 Y80.31984
G01 X28.43463 Y80.27602
G01 X28.42422 Y80.27364
G01 X28.35642 Y80.26155
G01 X28.25620 Y80.24867
G01 X28.20039 Y80.24593
G01 X28.13148 Y80.24593
G01 X28.07565 Y80.24867
G01 X27.97542 Y80.26155
G01 X27.90763 Y80.27364
G01 X27.89722 Y80.27602
G01 X27.75775 Y80.31984
G01 X27.72508 Y80.33099
G01 X27.69409 Y80.34620
G01 X27.56448 Y80.41387
G01 X27.55546 Y80.41951
G01 X27.49890 Y80.45893
G01 X27.41891 Y80.52070
G01 X27.37751 Y80.55824
G01 X27.32884 Y80.60691
G01 X27.29130 Y80.64831
G01 X27.26113 Y80.68740
G01 X27.22805 Y80.72710
G01 X27.18780 Y80.77198
G01 X27.18081 Y80.77988
G01 X27.14650 Y80.81925
G01 X27.06814 Y80.89749
G01 X26.99768 Y80.95903
G01 X26.94076 Y81.00475
G01 X26.94073 Y81.00475
G01 X26.92653 Y81.00625
G01 X26.86534 Y81.00625
G01 X26.85109 Y81.00475
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89592 Y81.17973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89592 Y81.17973
G01 X26.91241 Y81.09700
G01 X26.94027 Y81.00513
G01 X26.94073 Y81.00475
G01 X26.99768 Y80.95903
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.29511 Y80.77948 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.29511 Y80.77948
G01 X29.33719 Y80.85819
G01 X29.37395 Y80.94691
G01 X29.41947 Y81.09700
G01 X29.43592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.43592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.43592 Y82.41077
G01 X29.45241 Y82.49362
G01 X29.49793 Y82.64371
G01 X29.53468 Y82.73243
G01 X29.60862 Y82.87076
G01 X29.66198 Y82.95062
G01 X29.76148 Y83.07185
G01 X29.82940 Y83.13977
G01 X29.95063 Y83.23926
G01 X30.03049 Y83.29263
G01 X30.16882 Y83.36657
G01 X30.25754 Y83.40332
G01 X30.40763 Y83.44884
G01 X30.50184 Y83.46759
G01 X30.65792 Y83.48295
G01 X30.75396 Y83.48295
G01 X30.91004 Y83.46759
G01 X31.00425 Y83.44884
G01 X31.15434 Y83.40332
G01 X31.24306 Y83.36657
G01 X31.38139 Y83.29263
G01 X31.46124 Y83.23926
G01 X31.58248 Y83.13977
G01 X31.65040 Y83.07185
G01 X31.74989 Y82.95062
G01 X31.80326 Y82.87076
G01 X31.87719 Y82.73243
G01 X31.91395 Y82.64371
G01 X31.91649 Y82.63533
G01 X31.94161 Y82.63533
G01 X31.88337 Y82.77594
G01 X31.81674 Y82.89131
G01 X31.78362 Y82.96078
G01 X31.76175 Y83.03462
G01 X31.74905 Y83.09446
G01 X31.73838 Y83.19621
G01 X31.74908 Y83.29799
G01 X31.78067 Y83.39532
G01 X31.80554 Y83.45123
G01 X31.82586 Y83.48643
G01 X31.84522 Y83.49532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.74173 Y83.50106 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.74173 Y83.50106
G01 X34.75222 Y83.49438
G01 X34.79639 Y83.41839
G01 X34.82799 Y83.32405
G01 X34.83988 Y83.22524
G01 X34.84092 Y83.16741
G01 X34.83683 Y83.09489
G01 X34.82207 Y83.02375
G01 X34.81148 Y82.98674
G01 X34.80693 Y82.93558
G01 X34.80693 Y82.88933
G01 X34.82695 Y82.88933
G01 X34.82695 Y82.89931
G01 X34.83635 Y82.99492
G01 X34.86423 Y83.08684
G01 X34.90952 Y83.17155
G01 X34.97046 Y83.24579
G01 X35.04470 Y83.30673
G01 X35.12941 Y83.35202
G01 X35.22133 Y83.37990
G01 X35.31694 Y83.38930
G01 X37.01694 Y83.38930
G01 X37.11254 Y83.37990
G01 X37.20446 Y83.35202
G01 X37.28917 Y83.30673
G01 X37.36342 Y83.24579
G01 X37.42435 Y83.17155
G01 X37.44350 Y83.13571
G01 X37.46964 Y83.08684
G01 X37.49753 Y82.99492
G01 X37.50693 Y82.89931
G01 X37.50693 Y82.88933
G01 X37.52692 Y82.88933
G01 X37.52692 Y82.93558
G01 X37.52237 Y82.98674
G01 X37.51178 Y83.02375
G01 X37.49646 Y83.09918
G01 X37.49316 Y83.17607
G01 X37.49534 Y83.23723
G01 X37.50970 Y83.33863
G01 X37.54477 Y83.43484
G01 X37.58043 Y83.49184
G01 X37.58597 Y83.49532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.58106 Y91.19792 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.58106 Y91.19792
G01 X44.60806 Y91.16310
G01 X44.65893 Y91.09449
G01 X44.70265 Y91.02932
G01 X44.73358 Y90.97768
G01 X44.74392 Y90.96102
G01 X44.74994 Y90.95164
G01 X44.77275 Y90.91286
G01 X44.78692 Y90.88637
G01 X44.80910 Y90.84898
G01 X44.81113 Y90.84583
G01 X44.82088 Y90.83028
G01 X44.84788 Y90.78527
G01 X44.86980 Y90.75243
G01 X44.91110 Y90.69673
G01 X44.93384 Y90.66902
G01 X44.97999 Y90.61812
G01 X44.99190 Y90.60559
G01 X52.26928 Y83.32822
G01 X52.28180 Y83.31628
G01 X52.33270 Y83.27015
G01 X52.36042 Y83.24742
G01 X52.39234 Y83.22372
G01 X52.42163 Y83.21640
G01 X52.45663 Y83.20942
G01 X52.52524 Y83.19923
G01 X52.55724 Y83.19608
G01 X52.62587 Y83.19271
G01 X52.64142 Y83.19233
G01 X69.82190 Y83.19233
G01 X69.83742 Y83.19194
G01 X69.90602 Y83.18857
G01 X69.93805 Y83.18542
G01 X70.00666 Y83.17523
G01 X70.04166 Y83.16825
G01 X70.11027 Y83.15108
G01 X70.15055 Y83.13883
G01 X70.21913 Y83.11427
G01 X70.24270 Y83.10518
G01 X70.83384 Y82.86032
G01 X71.28656 Y82.40762
G01 X72.09489 Y81.59929
G01 X72.12718 Y81.56368
G01 X72.17071 Y81.51062
G01 X72.22408 Y81.43076
G01 X72.25644 Y81.37026
G01 X72.29319 Y81.28151
G01 X72.31311 Y81.21585
G01 X72.33185 Y81.12164
G01 X72.33856 Y81.05334
G01 X72.34092 Y81.00531
G01 X72.34092 Y76.71964
G01 X72.41283 Y76.66064
G01 X72.48075 Y76.59269
G01 X72.58646 Y76.46389
G01 X72.63983 Y76.38403
G01 X72.71839 Y76.23707
G01 X72.75514 Y76.14832
G01 X72.77092 Y76.09620
G01 X72.77092 Y75.26534
G01 X72.78674 Y75.21330
G01 X72.82349 Y75.12455
G01 X72.90206 Y74.97758
G01 X72.95542 Y74.89773
G01 X73.06111 Y74.76892
G01 X73.12906 Y74.70100
G01 X73.18410 Y74.65582
G01 X73.25786 Y74.59529
G01 X73.33772 Y74.54192
G01 X73.48468 Y74.46336
G01 X73.57343 Y74.42661
G01 X73.62547 Y74.41083
G01 X74.45633 Y74.41083
G01 X74.50845 Y74.39501
G01 X74.59720 Y74.35826
G01 X74.74417 Y74.27969
G01 X74.82402 Y74.22633
G01 X74.95283 Y74.12064
G01 X75.02075 Y74.05269
G01 X75.12646 Y73.92389
G01 X75.17983 Y73.84403
G01 X75.25839 Y73.69707
G01 X75.29514 Y73.60832
G01 X75.31092 Y73.55620
G01 X75.31092 Y72.72534
G01 X75.32674 Y72.67330
G01 X75.36349 Y72.58455
G01 X75.44206 Y72.43758
G01 X75.49542 Y72.35773
G01 X75.60111 Y72.22892
G01 X75.66906 Y72.16100
G01 X75.74094 Y72.10200
G01 X75.74094 Y67.82027
G01 X74.27460 Y66.35390
G01 X72.71344 Y66.35390
G01 X72.12238 Y66.10910
G01 X72.09878 Y66.09998
G01 X72.03018 Y66.07542
G01 X71.98989 Y66.06318
G01 X71.92129 Y66.04600
G01 X71.88628 Y66.03902
G01 X71.81768 Y66.02883
G01 X71.78567 Y66.02568
G01 X71.71707 Y66.02231
G01 X71.70152 Y66.02193
G01 X49.32453 Y66.02193
G01 X49.30901 Y66.02231
G01 X49.24038 Y66.02568
G01 X49.20838 Y66.02883
G01 X49.13977 Y66.03902
G01 X49.13550 Y66.03968
G01 X49.11043 Y66.05662
G01 X49.05473 Y66.09792
G01 X49.03060 Y66.11773
G01 X48.97970 Y66.16386
G01 X48.96883 Y66.17422
G01 X45.91021 Y69.23284
G01 X45.89985 Y69.24371
G01 X45.85372 Y69.29461
G01 X45.83391 Y69.31874
G01 X45.79261 Y69.37445
G01 X45.77336 Y69.40327
G01 X45.73701 Y69.46396
G01 X45.73099 Y69.47432
G01 X45.72875 Y69.50114
G01 X45.72538 Y69.56975
G01 X45.72492 Y69.58854
G01 X45.72492 Y82.04933
G01 X45.72446 Y82.06810
G01 X45.72108 Y82.13673
G01 X45.71727 Y82.17526
G01 X45.70711 Y82.24386
G01 X45.70460 Y82.25885
G01 X45.68949 Y82.28064
G01 X45.64816 Y82.33635
G01 X45.62385 Y82.36601
G01 X45.57770 Y82.41691
G01 X45.56492 Y82.43033
G01 X42.26292 Y85.73233
G01 X42.24951 Y85.74510
G01 X42.19861 Y85.79125
G01 X42.16894 Y85.81556
G01 X42.16315 Y85.81985
G01 X42.10169 Y85.83525
G01 X42.06668 Y85.84223
G01 X41.99808 Y85.85242
G01 X41.96607 Y85.85557
G01 X41.89747 Y85.85894
G01 X41.88195 Y85.85933
G01 X24.60995 Y85.85933
G01 X24.59441 Y85.85894
G01 X24.52577 Y85.85557
G01 X24.49377 Y85.85242
G01 X24.42516 Y85.84223
G01 X24.39016 Y85.83525
G01 X24.32156 Y85.81808
G01 X24.28127 Y85.80583
G01 X24.21267 Y85.78127
G01 X24.18910 Y85.77215
G01 X23.59796 Y85.52732
G01 X22.79888 Y85.52732
G01 X21.38593 Y84.11437
G01 X21.38593 Y83.16977
G01 X21.42248 Y83.13977
G01 X21.49040 Y83.07185
G01 X21.58989 Y82.95062
G01 X21.64326 Y82.87076
G01 X21.71719 Y82.73243
G01 X21.75395 Y82.64371
G01 X21.79947 Y82.49362
G01 X21.81592 Y82.41077
G01 X21.81592 Y81.17973
G01 X21.79947 Y81.09700
G01 X21.77160 Y81.00516
G01 X21.71417 Y80.95903
G01 X21.64371 Y80.89749
G01 X21.56535 Y80.81925
G01 X21.53104 Y80.77988
G01 X21.52405 Y80.77198
G01 X21.48379 Y80.72710
G01 X21.45072 Y80.68740
G01 X21.42055 Y80.64831
G01 X21.38301 Y80.60691
G01 X21.33434 Y80.55824
G01 X21.29294 Y80.52070
G01 X21.21295 Y80.45893
G01 X21.15639 Y80.41951
G01 X21.14737 Y80.41387
G01 X21.01775 Y80.34620
G01 X20.98677 Y80.33099
G01 X20.95410 Y80.31984
G01 X20.81463 Y80.27602
G01 X20.80422 Y80.27364
G01 X20.73642 Y80.26155
G01 X20.63620 Y80.24867
G01 X20.58039 Y80.24593
G01 X20.51148 Y80.24593
G01 X20.45565 Y80.24867
G01 X20.35542 Y80.26155
G01 X20.28763 Y80.27364
G01 X20.27722 Y80.27602
G01 X20.13775 Y80.31984
G01 X20.10508 Y80.33099
G01 X20.07409 Y80.34620
G01 X19.94448 Y80.41387
G01 X19.93546 Y80.41951
G01 X19.87890 Y80.45893
G01 X19.79883 Y80.52078
G01 X19.75593 Y80.55634
G01 X19.74031 Y80.56828
G01 X19.70618 Y80.59609
G01 X19.70104 Y80.60051
G01 X19.56724 Y80.69360
G01 X19.52517 Y80.71699
G01 X19.48606 Y80.73993
G01 X19.46490 Y80.75301
G01 X19.41768 Y80.77775
G01 X19.41766 Y80.77775
G01 X19.41527 Y80.77902
G01 X19.36353 Y80.77493
G01 X19.26528 Y80.74582
G01 X19.17524 Y80.69690
G01 X19.12482 Y80.66223
G01 X19.06513 Y80.61390
G01 X19.01372 Y80.55680
G01 X18.99297 Y80.52975
G01 X18.87153 Y80.40831
G01 X18.84593 Y80.38865
G01 X18.84593 Y80.42086
G01 X18.88248 Y80.45085
G01 X18.95040 Y80.51877
G01 X19.04989 Y80.64001
G01 X19.08654 Y80.69487
G01 X19.10326 Y80.71986
G01 X19.17719 Y80.85819
G01 X19.21395 Y80.94691
G01 X19.25947 Y81.09700
G01 X19.27592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.27592 Y82.41077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.27592 Y82.41077
G01 X19.25947 Y82.49362
G01 X19.21395 Y82.64371
G01 X19.17719 Y82.73243
G01 X19.11136 Y82.85560
G01 X19.14892 Y82.86154
G01 X19.24458 Y82.89827
G01 X19.27641 Y82.91447
G01 X19.36584 Y82.90625
G01 X19.42703 Y82.90625
G01 X19.47608 Y82.91138
G01 X19.47613 Y82.91140
G01 X19.51867 Y82.93693
G01 X19.65004 Y83.03198
G01 X19.67554 Y83.05417
G01 X19.71385 Y83.08562
G01 X19.72312 Y83.09278
G01 X19.77559 Y83.13685
G01 X19.82721 Y83.31833
G01 X19.83688 Y83.37952
G01 X19.84567 Y83.49039
G01 X19.84567 Y83.75278
G01 X19.84514 Y83.78031
G01 X19.84453 Y83.79585
G01 X19.82484 Y83.93670
G01 X19.81016 Y83.99786
G01 X19.76861 Y84.12496
G01 X19.70592 Y84.27627
G01 X19.23394 Y84.74825
G01 X19.23859 Y84.79529
G01 X19.23859 Y84.89133
G01 X19.23394 Y84.93842
G01 X19.30000 Y85.00449
G01 X19.35294 Y84.93845
G01 X19.39619 Y84.89517
G01 X19.45812 Y84.84500
G01 X19.47582 Y84.83068
G01 X19.56711 Y84.78414
G01 X19.66609 Y84.75760
G01 X19.72652 Y84.74802
G01 X19.75855 Y84.74635
G01 X19.84054 Y84.80042
G01 X19.90259 Y84.84505
G01 X19.96543 Y84.89440
G01 X19.97247 Y84.89999
G01 X20.02009 Y84.93832
G01 X20.02116 Y84.93918
G01 X20.04775 Y84.96050
G01 X20.10539 Y85.01211
G01 X21.95578 Y86.86247
G01 X21.98067 Y86.88620
G01 X22.01892 Y86.92087
G01 X22.03175 Y86.93209
G01 X22.04996 Y86.94845
G01 X22.08547 Y86.97832
G01 X22.08870 Y86.98086
G01 X22.13881 Y87.02407
G01 X22.19875 Y87.08046
G01 X22.25349 Y87.13636
G01 X22.26677 Y87.15104
G01 X22.28679 Y87.17261
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.70749 Y88.22333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.70749 Y88.22333
G01 X20.07897 Y91.85187
G01 X20.04666 Y91.88751
G01 X20.00315 Y91.94054
G01 X19.94979 Y92.02040
G01 X19.91743 Y92.08090
G01 X19.88067 Y92.16965
G01 X19.86193 Y92.23137
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.83292 Y93.43980 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.83292 Y93.43980
G01 X19.83295 Y94.25451
G01 X19.76104 Y94.31349
G01 X19.69312 Y94.38143
G01 X19.58740 Y94.51024
G01 X19.53404 Y94.59009
G01 X19.45550 Y94.73706
G01 X19.41875 Y94.82580
G01 X19.40292 Y94.87785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.40292 Y95.70871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.40292 Y95.70871
G01 X19.41875 Y95.76083
G01 X19.45550 Y95.84958
G01 X19.53404 Y95.99654
G01 X19.58740 Y96.07640
G01 X19.64793 Y96.15014
G01 X19.69312 Y96.20520
G01 X19.76104 Y96.27312
G01 X19.88984 Y96.37884
G01 X19.96973 Y96.43220
G01 X20.11666 Y96.51074
G01 X20.20541 Y96.54752
G01 X20.36487 Y96.59588
G01 X20.45908 Y96.61463
G01 X20.62492 Y96.63096
G01 X20.72096 Y96.63096
G01 X20.88679 Y96.61463
G01 X20.98100 Y96.59588
G01 X21.14046 Y96.54752
G01 X21.22921 Y96.51074
G01 X21.36058 Y96.44053
G01 X21.37615 Y96.43220
G01 X21.45603 Y96.37884
G01 X21.58484 Y96.27312
G01 X21.65275 Y96.20520
G01 X21.75847 Y96.07640
G01 X21.81184 Y95.99654
G01 X21.89037 Y95.84958
G01 X21.92713 Y95.76083
G01 X21.94292 Y95.70871
G01 X21.94292 Y94.87785
G01 X21.95875 Y94.82580
G01 X21.99550 Y94.73706
G01 X22.07404 Y94.59009
G01 X22.12740 Y94.51024
G01 X22.23312 Y94.38143
G01 X22.30104 Y94.31349
G01 X22.37295 Y94.25451
G01 X22.37295 Y92.53950
G01 X22.37531 Y92.49149
G01 X22.38201 Y92.42319
G01 X22.40076 Y92.32898
G01 X22.42067 Y92.26333
G01 X22.45743 Y92.17458
G01 X22.48979 Y92.11408
G01 X22.54315 Y92.03422
G01 X22.58666 Y91.98118
G01 X22.61897 Y91.94555
G01 X25.32519 Y89.23933
G01 X25.91630 Y88.99450
G01 X25.93987 Y88.98538
G01 X26.00847 Y88.96082
G01 X26.04876 Y88.94857
G01 X26.11736 Y88.93140
G01 X26.15236 Y88.92442
G01 X26.22097 Y88.91423
G01 X26.25297 Y88.91108
G01 X26.32161 Y88.90771
G01 X26.33715 Y88.90733
G01 X43.40595 Y88.90733
G01 X43.42147 Y88.90694
G01 X43.49007 Y88.90357
G01 X43.52208 Y88.90042
G01 X43.59068 Y88.89023
G01 X43.62569 Y88.88325
G01 X43.68715 Y88.86785
G01 X43.69294 Y88.86356
G01 X43.72261 Y88.83925
G01 X43.77351 Y88.79310
G01 X43.78692 Y88.78033
G01 X51.27992 Y81.28733
G01 X51.29334 Y81.27455
G01 X51.34424 Y81.22840
G01 X51.37390 Y81.20409
G01 X51.42961 Y81.16276
G01 X51.46463 Y81.13940
G01 X51.52529 Y81.10302
G01 X51.56849 Y81.07999
G01 X51.63438 Y81.04882
G01 X51.66095 Y81.03706
G01 X51.89687 Y80.93932
G01 X52.61091 Y80.93932
G01 X52.64820 Y80.93841
G01 X52.71680 Y80.93505
G01 X52.79262 Y80.92756
G01 X52.86123 Y80.91737
G01 X52.94136 Y80.90140
G01 X53.00997 Y80.88423
G01 X53.09773 Y80.85753
G01 X53.16636 Y80.83297
G01 X53.17837 Y80.82832
G01 X53.20489 Y80.80429
G01 X54.31489 Y79.69429
G01 X54.34720 Y79.65865
G01 X54.39071 Y79.60562
G01 X54.44408 Y79.52576
G01 X54.47644 Y79.46528
G01 X54.51319 Y79.37651
G01 X54.53311 Y79.31085
G01 X54.55185 Y79.21664
G01 X54.55856 Y79.14834
G01 X54.56092 Y79.10031
G01 X54.56092 Y76.71964
G01 X54.63283 Y76.66064
G01 X54.70075 Y76.59269
G01 X54.80646 Y76.46389
G01 X54.85983 Y76.38403
G01 X54.93839 Y76.23707
G01 X54.97514 Y76.14832
G01 X54.99092 Y76.09620
G01 X54.99092 Y75.26534
G01 X55.00674 Y75.21330
G01 X55.04349 Y75.12455
G01 X55.12206 Y74.97758
G01 X55.17542 Y74.89773
G01 X55.28111 Y74.76892
G01 X55.34906 Y74.70100
G01 X55.40410 Y74.65582
G01 X55.47786 Y74.59529
G01 X55.55772 Y74.54192
G01 X55.70468 Y74.46336
G01 X55.79343 Y74.42661
G01 X55.84547 Y74.41083
G01 X56.67633 Y74.41083
G01 X56.72845 Y74.39501
G01 X56.81720 Y74.35826
G01 X56.96417 Y74.27969
G01 X57.04402 Y74.22633
G01 X57.17283 Y74.12064
G01 X57.24075 Y74.05269
G01 X57.34646 Y73.92389
G01 X57.39983 Y73.84403
G01 X57.47839 Y73.69707
G01 X57.51514 Y73.60832
G01 X57.53092 Y73.55620
G01 X57.53092 Y72.72534
G01 X57.51514 Y72.67330
G01 X57.47839 Y72.58455
G01 X57.39983 Y72.43758
G01 X57.34646 Y72.35773
G01 X57.28593 Y72.28397
G01 X57.24075 Y72.22892
G01 X57.17283 Y72.16100
G01 X57.07585 Y72.08140
G01 X57.07328 Y70.12847
G01 X57.10948 Y70.09878
G01 X57.17740 Y70.03086
G01 X57.27689 Y69.90962
G01 X57.33026 Y69.82974
G01 X57.40419 Y69.69144
G01 X57.44095 Y69.60269
G01 X57.48647 Y69.45263
G01 X57.50521 Y69.35842
G01 X57.52058 Y69.20234
G01 X57.52058 Y69.10627
G01 X57.50521 Y68.95022
G01 X57.49711 Y68.90963
G01 X57.47100 Y68.86073
G01 X57.38789 Y68.72205
G01 X57.34059 Y68.65118
G01 X57.24616 Y68.52385
G01 X57.19734 Y68.46431
G01 X57.09188 Y68.34798
G01 X57.03927 Y68.29538
G01 X57.01865 Y68.27666
G01 X56.88964 Y68.23051
G01 X56.82596 Y68.21115
G01 X56.66914 Y68.17186
G01 X56.61613 Y68.16129
G01 X56.45929 Y68.13802
G01 X56.41227 Y68.13338
G01 X56.25545 Y68.12568
G01 X56.21042 Y68.12568
G01 X56.05360 Y68.13338
G01 X56.00656 Y68.13802
G01 X55.84971 Y68.16129
G01 X55.79670 Y68.17186
G01 X55.63989 Y68.21115
G01 X55.57621 Y68.23051
G01 X55.41939 Y68.28661
G01 X55.33961 Y68.31976
G01 X55.19973 Y68.38590
G01 X55.19808 Y68.38590
G01 X55.19330 Y68.38352
G01 X55.14842 Y68.36101
G01 X55.08723 Y68.33233
G01 X54.85317 Y68.26096
G01 X54.79823 Y68.25319
G01 X54.69915 Y68.24618
G01 X54.29864 Y68.24618
G01 X54.14619 Y68.20800
G01 X54.08617 Y68.19604
G01 X53.92935 Y68.17277
G01 X53.87565 Y68.16746
G01 X53.71883 Y68.15977
G01 X53.66704 Y68.15977
G01 X53.51020 Y68.16746
G01 X53.45650 Y68.17277
G01 X53.29968 Y68.19604
G01 X53.23966 Y68.20800
G01 X53.08721 Y68.24618
G01 X50.25102 Y68.24618
G01 X50.14012 Y68.25497
G01 X50.07894 Y68.26464
G01 X50.07294 Y68.26561
G01 X49.96464 Y68.34808
G01 X49.95323 Y68.35862
G01 X49.93334 Y68.37775
G01 X48.17475 Y70.13634
G01 X48.10249 Y70.22105
G01 X48.06606 Y70.27117
G01 X48.06261 Y70.27597
G01 X48.04432 Y70.41094
G01 X48.04371 Y70.42649
G01 X48.04318 Y70.45402
G01 X48.04318 Y81.68717
G01 X48.05197 Y81.79807
G01 X48.06164 Y81.85926
G01 X48.14602 Y82.11194
G01 X48.17719 Y82.17312
G01 X48.18293 Y82.18298
G01 X48.18293 Y82.43436
G01 X47.97419 Y82.93830
G01 X47.96243 Y82.96487
G01 X47.93126 Y83.03076
G01 X47.90823 Y83.07396
G01 X47.87185 Y83.13462
G01 X47.84849 Y83.16964
G01 X47.80716 Y83.22535
G01 X47.78285 Y83.25501
G01 X47.73670 Y83.30591
G01 X47.72392 Y83.31933
G01 X43.27892 Y87.76433
G01 X43.26551 Y87.77710
G01 X43.21461 Y87.82325
G01 X43.18494 Y87.84756
G01 X43.17915 Y87.85185
G01 X43.11769 Y87.86725
G01 X43.08268 Y87.87423
G01 X43.01408 Y87.88442
G01 X42.98207 Y87.88757
G01 X42.91347 Y87.89094
G01 X42.89795 Y87.89133
G01 X24.71942 Y87.89133
G01 X24.70390 Y87.89171
G01 X24.63527 Y87.89508
G01 X24.60327 Y87.89823
G01 X24.53466 Y87.90842
G01 X24.49966 Y87.91540
G01 X24.43106 Y87.93257
G01 X24.39077 Y87.94482
G01 X24.32217 Y87.96938
G01 X24.29857 Y87.97850
G01 X23.70749 Y88.22333
G01 X23.58628 Y88.22330
G01 X19.86193 Y91.94765
G01 X19.86193 Y92.23137
G01 X19.86132 Y92.23551
G01 X19.85195 Y92.33046
G01 X19.84857 Y92.39906
G01 X19.84742 Y92.44582
G01 X19.84742 Y93.22533
G01 X19.84628 Y93.27206
G01 X19.84290 Y93.34069
G01 X19.83353 Y93.43566
G01 X19.83292 Y93.43980
G01 X19.81420 Y93.50150
G01 X19.77745 Y93.59025
G01 X19.74509 Y93.65075
G01 X19.69172 Y93.73061
G01 X19.64821 Y93.78364
G01 X19.61590 Y93.81928
G01 X19.08327 Y94.35192
G01 X19.11275 Y94.38143
G01 X19.15792 Y94.43645
G01 X19.21847 Y94.51024
G01 X19.27184 Y94.59009
G01 X19.35037 Y94.73706
G01 X19.38713 Y94.82580
G01 X19.40292 Y94.87785
G01 X19.40292 Y95.70871
G01 X19.38713 Y95.76083
G01 X19.35037 Y95.84958
G01 X19.27184 Y95.99654
G01 X19.21847 Y96.07640
G01 X19.11275 Y96.20520
G01 X19.04484 Y96.27312
G01 X18.91603 Y96.37884
G01 X18.83970 Y96.42984
G01 X18.83615 Y96.43220
G01 X18.68921 Y96.51074
G01 X18.60046 Y96.54752
G01 X18.44100 Y96.59588
G01 X18.34679 Y96.61463
G01 X18.18096 Y96.63096
G01 X18.08492 Y96.63096
G01 X17.91908 Y96.61463
G01 X17.82487 Y96.59588
G01 X17.66541 Y96.54752
G01 X17.57666 Y96.51074
G01 X17.42973 Y96.43220
G01 X17.34982 Y96.37884
G01 X17.22104 Y96.27312
G01 X17.15312 Y96.20520
G01 X17.10793 Y96.15014
G01 X17.04740 Y96.07640
G01 X16.99401 Y95.99654
G01 X16.91550 Y95.84958
G01 X16.87875 Y95.76083
G01 X16.86292 Y95.70871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.86292 Y94.87785 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.86292 Y94.87785
G01 X16.87875 Y94.82580
G01 X16.91550 Y94.73706
G01 X16.99401 Y94.59009
G01 X17.04740 Y94.51024
G01 X17.15312 Y94.38143
G01 X17.22104 Y94.31349
G01 X17.29292 Y94.25451
G01 X17.29292 Y94.23033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.39290 Y94.70447 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.39290 Y94.70447
G01 X14.45404 Y94.59009
G01 X14.50740 Y94.51024
G01 X14.61312 Y94.38143
G01 X14.68104 Y94.31349
G01 X14.80984 Y94.20780
G01 X14.88973 Y94.15443
G01 X15.03666 Y94.07587
G01 X15.12541 Y94.03912
G01 X15.28487 Y93.99075
G01 X15.37908 Y93.97201
G01 X15.54492 Y93.95568
G01 X15.64096 Y93.95568
G01 X15.80679 Y93.97201
G01 X15.90100 Y93.99075
G01 X16.06046 Y94.03912
G01 X16.14918 Y94.07587
G01 X16.29615 Y94.15443
G01 X16.37603 Y94.20780
G01 X16.50484 Y94.31349
G01 X16.57275 Y94.38143
G01 X16.67847 Y94.51024
G01 X16.73184 Y94.59009
G01 X16.81035 Y94.73706
G01 X16.84713 Y94.82580
G01 X16.86292 Y94.87785
G01 X16.86292 Y95.70871
G01 X16.84713 Y95.76083
G01 X16.81035 Y95.84958
G01 X16.73184 Y95.99654
G01 X16.67847 Y96.07640
G01 X16.57275 Y96.20520
G01 X16.50484 Y96.27312
G01 X16.37603 Y96.37884
G01 X16.31571 Y96.41915
G01 X16.29615 Y96.43220
G01 X16.14918 Y96.51074
G01 X16.06046 Y96.54752
G01 X15.90100 Y96.59588
G01 X15.80679 Y96.61463
G01 X15.64096 Y96.63096
G01 X15.54492 Y96.63096
G01 X15.37908 Y96.61463
G01 X15.28487 Y96.59588
G01 X15.12541 Y96.54752
G01 X15.03666 Y96.51074
G01 X14.88973 Y96.43220
G01 X14.80984 Y96.37884
G01 X14.77436 Y96.34970
G01 X14.68104 Y96.27312
G01 X14.61312 Y96.20520
G01 X14.50740 Y96.07640
G01 X14.45404 Y95.99654
G01 X14.39290 Y95.88214
G01 X14.38366 Y95.84523
G01 X14.36522 Y95.75278
G01 X14.34050 Y95.58613
G01 X14.33212 Y95.50122
G01 X14.32394 Y95.33459
G01 X14.32394 Y95.25207
G01 X14.33212 Y95.08542
G01 X14.34050 Y95.00051
G01 X14.36522 Y94.83386
G01 X14.38366 Y94.74135
G01 X14.39290 Y94.70447
G01 X14.39293 Y94.44331
G01 X14.38353 Y94.34773
G01 X14.35564 Y94.25580
G01 X14.31035 Y94.17109
G01 X14.24942 Y94.09682
G01 X14.17517 Y94.03589
G01 X14.09046 Y93.99060
G01 X13.99854 Y93.96274
G01 X13.90294 Y93.95331
G01 X12.20294 Y93.95331
G01 X12.10733 Y93.96274
G01 X12.01541 Y93.99060
G01 X11.93070 Y94.03589
G01 X11.85646 Y94.09682
G01 X11.79552 Y94.17109
G01 X11.78920 Y94.18288
G01 X11.75023 Y94.25580
G01 X11.72235 Y94.34773
G01 X11.71295 Y94.44331
G01 X11.71295 Y94.45331
G01 X11.69293 Y94.45331
G01 X11.69293 Y94.40709
G01 X11.69748 Y94.35588
G01 X11.71668 Y94.28877
G01 X11.73192 Y94.21351
G01 X11.73525 Y94.13678
G01 X11.73309 Y94.07562
G01 X11.71879 Y93.97414
G01 X11.68369 Y93.87785
G01 X11.64820 Y93.82116
G01 X11.64218 Y93.81732
G01 X11.61648 Y93.80104
G01 X11.55532 Y93.77122
G01 X11.31277 Y93.69403
G01 X11.25493 Y93.68540
G01 X11.15036 Y93.67757
G01 X8.35994 Y93.67757
G01 X8.32550 Y93.67673
G01 X8.29121 Y93.67506
G01 X8.25720 Y93.67000
G01 X8.18974 Y93.65659
G01 X8.16411 Y93.65017
G01 X8.15644 Y93.64826
G01 X8.12408 Y93.63668
G01 X8.06050 Y93.61034
G01 X8.02939 Y93.59563
G01 X8.00000 Y93.57800
G01 X7.94270 Y93.53973
G01 X7.91514 Y93.51928
G01 X7.88966 Y93.49619
G01 X7.86477 Y93.47249
G01 X3.41378 Y89.02147
G01 X3.39005 Y88.99658
G01 X3.36696 Y88.97110
G01 X3.34652 Y88.94355
G01 X3.30824 Y88.88627
G01 X3.29061 Y88.85683
G01 X3.27593 Y88.82577
G01 X3.24959 Y88.76216
G01 X3.23803 Y88.72983
G01 X3.22968 Y88.69651
G01 X3.21624 Y88.62904
G01 X3.21121 Y88.59503
G01 X3.20951 Y88.56074
G01 X3.20867 Y88.52630
G01 X3.20867 Y80.02009
G01 X3.19988 Y79.90922
G01 X3.19021 Y79.84803
G01 X3.10583 Y79.59536
G01 X3.07466 Y79.53419
G01 X3.06958 Y79.52467
G01 X3.04342 Y79.50950
G01 X3.04342 Y79.17880
G01 X3.06895 Y79.15784
G01 X3.07568 Y79.14362
G01 X3.11347 Y79.05261
G01 X3.16958 Y78.89579
G01 X3.19211 Y78.82167
G01 X3.23138 Y78.66490
G01 X3.24393 Y78.60196
G01 X3.26722 Y78.44509
G01 X3.27281 Y78.38842
G01 X3.28050 Y78.23163
G01 X3.28050 Y78.17710
G01 X3.27281 Y78.02022
G01 X3.26722 Y77.96356
G01 X3.24393 Y77.80671
G01 X3.23140 Y77.74382
G01 X3.19211 Y77.58700
G01 X3.16958 Y77.51286
G01 X3.11347 Y77.35604
G01 X3.07565 Y77.26501
G01 X3.06892 Y77.25078
G01 X3.06895 Y76.61784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.06895 Y79.15784 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.06895 Y79.15784
G01 X3.06895 Y79.52342
G01 X3.07466 Y79.53419
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.06892 Y77.25078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.06892 Y77.25078
G01 X3.04342 Y77.22985
G01 X3.04342 Y76.63877
G01 X3.06895 Y76.61784
G01 X3.07568 Y76.60359
G01 X3.11347 Y76.51261
G01 X3.16958 Y76.35579
G01 X3.19211 Y76.28167
G01 X3.23138 Y76.12488
G01 X3.24393 Y76.06194
G01 X3.26722 Y75.90509
G01 X3.27281 Y75.84842
G01 X3.28050 Y75.69163
G01 X3.28050 Y75.63707
G01 X3.27281 Y75.48022
G01 X3.26722 Y75.42353
G01 X3.24393 Y75.26671
G01 X3.23140 Y75.20382
G01 X3.19211 Y75.04700
G01 X3.16958 Y74.97286
G01 X3.11347 Y74.81604
G01 X3.07565 Y74.72501
G01 X3.06892 Y74.71078
G01 X3.06895 Y74.07784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.06892 Y74.71078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.06892 Y74.71078
G01 X3.04342 Y74.68985
G01 X3.04342 Y74.09877
G01 X3.06895 Y74.07784
G01 X3.07568 Y74.06359
G01 X3.11347 Y73.97261
G01 X3.16958 Y73.81579
G01 X3.19211 Y73.74167
G01 X3.23138 Y73.58488
G01 X3.24393 Y73.52194
G01 X3.26722 Y73.36509
G01 X3.27281 Y73.30842
G01 X3.28050 Y73.15163
G01 X3.28050 Y73.09707
G01 X3.27281 Y72.94022
G01 X3.26722 Y72.88353
G01 X3.24393 Y72.72671
G01 X3.23140 Y72.66382
G01 X3.19211 Y72.50700
G01 X3.16958 Y72.43286
G01 X3.11347 Y72.27604
G01 X3.07565 Y72.18501
G01 X3.06892 Y72.17078
G01 X3.06895 Y71.53784
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.06892 Y72.17078 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.06892 Y72.17078
G01 X3.04342 Y72.14985
G01 X3.04342 Y71.55877
G01 X3.06895 Y71.53784
G01 X3.07568 Y71.52359
G01 X3.11347 Y71.43261
G01 X3.16958 Y71.27579
G01 X3.19211 Y71.20167
G01 X3.23138 Y71.04488
G01 X3.24393 Y70.98194
G01 X3.26722 Y70.82509
G01 X3.27281 Y70.76842
G01 X3.28050 Y70.61163
G01 X3.28050 Y70.55707
G01 X3.27281 Y70.40022
G01 X3.26722 Y70.34353
G01 X3.24393 Y70.18671
G01 X3.23140 Y70.12382
G01 X3.19211 Y69.96700
G01 X3.16958 Y69.89286
G01 X3.11347 Y69.73604
G01 X3.07565 Y69.64501
G01 X3.06892 Y69.63078
G01 X3.06895 Y69.05425
G01 X3.12053 Y68.83304
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X1.29559 Y66.97918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X1.29559 Y66.97918
G01 X1.20390 Y67.00376
G01 X1.11264 Y67.05027
G01 X1.03303 Y67.11471
G01 X0.98978 Y67.15797
G01 X0.93245 Y67.22693
G01 X0.88864 Y67.30516
G01 X0.85981 Y67.39005
G01 X0.84901 Y67.43500
G01 X0.83547 Y67.54941
G01 X0.83547 Y68.85171
G01 X0.84149 Y68.92835
G01 X0.85943 Y69.00307
G01 X0.87832 Y69.06126
G01 X0.92000 Y69.15489
G01 X0.98023 Y69.23777
G01 X1.02498 Y69.27808
G01 X1.05638 Y69.30635
G01 X1.10588 Y69.34231
G01 X1.19458 Y69.39352
G01 X1.29201 Y69.42517
G01 X1.36341 Y69.43269
G01 X1.36341 Y69.60988
G01 X1.32689 Y69.63985
G01 X1.25897 Y69.70777
G01 X1.15948 Y69.82900
G01 X1.10611 Y69.90886
G01 X1.03220 Y70.04719
G01 X0.99544 Y70.13594
G01 X0.94990 Y70.28600
G01 X0.93118 Y70.38021
G01 X0.91579 Y70.53629
G01 X0.91579 Y70.63233
G01 X0.93118 Y70.78841
G01 X0.94990 Y70.88262
G01 X0.99544 Y71.03271
G01 X1.02498 Y71.10401
G01 X1.03220 Y71.12143
G01 X1.10611 Y71.25976
G01 X1.15948 Y71.33962
G01 X1.25897 Y71.46085
G01 X1.32689 Y71.52877
G01 X1.36341 Y71.55874
G01 X1.36341 Y72.14988
G01 X1.32689 Y72.17985
G01 X1.25897 Y72.24777
G01 X1.15948 Y72.36900
G01 X1.10611 Y72.44886
G01 X1.03220 Y72.58719
G01 X0.99544 Y72.67594
G01 X0.94990 Y72.82600
G01 X0.93118 Y72.92021
G01 X0.91579 Y73.07629
G01 X0.91579 Y73.17233
G01 X0.93118 Y73.32841
G01 X0.94990 Y73.42262
G01 X0.99544 Y73.57271
G01 X1.02498 Y73.64401
G01 X1.03220 Y73.66143
G01 X1.10611 Y73.79976
G01 X1.15948 Y73.87962
G01 X1.25897 Y74.00085
G01 X1.32689 Y74.06877
G01 X1.36341 Y74.09874
G01 X1.36341 Y74.68988
G01 X1.32689 Y74.71985
G01 X1.25897 Y74.78777
G01 X1.15948 Y74.90900
G01 X1.10611 Y74.98886
G01 X1.03220 Y75.12719
G01 X0.99544 Y75.21594
G01 X0.94990 Y75.36600
G01 X0.93118 Y75.46021
G01 X0.91579 Y75.61629
G01 X0.91579 Y75.71233
G01 X0.93118 Y75.86841
G01 X0.94990 Y75.96262
G01 X0.99544 Y76.11271
G01 X1.02498 Y76.18401
G01 X1.03220 Y76.20143
G01 X1.10611 Y76.33976
G01 X1.15948 Y76.41962
G01 X1.25897 Y76.54085
G01 X1.32689 Y76.60877
G01 X1.36341 Y76.63874
G01 X1.36341 Y77.22988
G01 X1.32689 Y77.25985
G01 X1.25897 Y77.32777
G01 X1.15948 Y77.44900
G01 X1.10611 Y77.52886
G01 X1.03220 Y77.66719
G01 X0.99544 Y77.75594
G01 X0.94990 Y77.90603
G01 X0.93118 Y78.00021
G01 X0.91579 Y78.15629
G01 X0.91579 Y78.25233
G01 X0.93118 Y78.40841
G01 X0.94990 Y78.50262
G01 X0.99544 Y78.65271
G01 X1.02498 Y78.72401
G01 X1.03220 Y78.74143
G01 X1.10611 Y78.87976
G01 X1.15948 Y78.95962
G01 X1.25897 Y79.08085
G01 X1.32689 Y79.14877
G01 X1.36341 Y79.17874
G01 X1.36341 Y79.35212
G01 X1.26943 Y79.36917
G01 X1.17459 Y79.40806
G01 X1.12069 Y79.43704
G01 X1.03606 Y79.49475
G01 X0.96527 Y79.56881
G01 X0.91145 Y79.65591
G01 X0.88490 Y79.71103
G01 X0.85257 Y79.79873
G01 X0.83745 Y79.89091
G01 X0.83657 Y79.90419
G01 X0.83547 Y79.93691
G01 X0.83547 Y103.29251
G01 X0.84149 Y103.36915
G01 X0.85943 Y103.44387
G01 X0.87832 Y103.50206
G01 X0.92000 Y103.59569
G01 X0.98023 Y103.67857
G01 X1.05638 Y103.74715
G01 X1.10588 Y103.78311
G01 X1.20634 Y103.83938
G01 X1.31716 Y103.87064
G01 X1.34777 Y103.87549
G01 X1.42450 Y103.88154
G01 X36.41592 Y103.88154
G01 X36.49263 Y103.87549
G01 X36.56743 Y103.85751
G01 X36.62562 Y103.83859
G01 X36.71917 Y103.79693
G01 X36.80200 Y103.73673
G01 X36.84226 Y103.69201
G01 X36.87053 Y103.66061
G01 X36.90650 Y103.61111
G01 X36.95770 Y103.52241
G01 X36.98935 Y103.42497
G01 X37.00007 Y103.32310
G01 X37.00007 Y103.26193
G01 X36.98935 Y103.16008
G01 X36.96913 Y103.09782
G01 X36.94922 Y103.08230
G01 X36.88432 Y103.03171
G01 X36.85189 Y103.01360
G01 X36.84328 Y103.00872
G01 X36.79364 Y102.98027
G01 X36.77797 Y102.97151
G01 X36.71018 Y102.93453
G01 X36.64767 Y102.90420
G01 X36.64706 Y102.90394
G01 X36.62575 Y102.89442
G01 X36.58806 Y102.87682
G01 X36.58486 Y102.87532
G01 X36.55379 Y102.86064
G01 X36.52435 Y102.84301
G01 X36.46708 Y102.80473
G01 X36.43952 Y102.78429
G01 X36.41404 Y102.76120
G01 X36.38915 Y102.73747
G01 X34.48989 Y100.83824
G01 X34.46619 Y100.81335
G01 X34.44308 Y100.78785
G01 X34.42266 Y100.76031
G01 X34.38438 Y100.70301
G01 X34.36672 Y100.67357
G01 X34.35204 Y100.64253
G01 X34.32570 Y100.57893
G01 X34.31412 Y100.54657
G01 X34.30579 Y100.51327
G01 X34.29238 Y100.44581
G01 X34.28732 Y100.41177
G01 X34.28562 Y100.37751
G01 X34.28478 Y100.34309
G01 X34.28478 Y96.51694
G01 X34.28562 Y96.48249
G01 X34.28732 Y96.44826
G01 X34.29235 Y96.41422
G01 X34.30579 Y96.34678
G01 X34.31415 Y96.31346
G01 X34.32570 Y96.28112
G01 X34.35204 Y96.21752
G01 X34.36675 Y96.18643
G01 X34.36873 Y96.18313
G01 X34.38435 Y96.15702
G01 X34.42266 Y96.09974
G01 X34.44308 Y96.07218
G01 X34.46619 Y96.04671
G01 X34.48989 Y96.02181
G01 X34.97752 Y95.53419
G01 X35.00241 Y95.51046
G01 X35.02789 Y95.48737
G01 X35.05545 Y95.46693
G01 X35.11272 Y95.42865
G01 X35.14216 Y95.41102
G01 X35.17323 Y95.39631
G01 X35.23683 Y95.37000
G01 X35.26916 Y95.35842
G01 X35.30249 Y95.35009
G01 X35.36995 Y95.33665
G01 X35.40393 Y95.33162
G01 X35.43825 Y95.32992
G01 X35.47269 Y95.32908
G01 X35.48819 Y95.32908
G01 X35.59906 Y95.32029
G01 X35.66025 Y95.31061
G01 X35.68491 Y95.30630
G01 X35.76456 Y95.23894
G01 X35.78079 Y95.22309
G01 X35.79502 Y95.20957
G01 X35.81483 Y95.19126
G01 X35.82062 Y95.18588
G01 X35.82435 Y95.18234
G01 X35.93670 Y95.09253
G01 X35.97386 Y95.06479
G01 X35.99370 Y95.05372
G01 X36.13180 Y94.97945
G01 X36.14130 Y94.97442
G01 X36.19593 Y94.95423
G01 X36.26377 Y94.93231
G01 X36.34366 Y94.90101
G01 X36.36807 Y94.88974
G01 X36.41122 Y94.87140
G01 X36.42639 Y94.86548
G01 X36.56159 Y94.79817
G01 X36.60434 Y94.77216
G01 X36.60454 Y94.70462
G01 X36.60444 Y94.68671
G01 X36.60365 Y94.64026
G01 X36.60355 Y94.62245
G01 X36.60454 Y94.38821
G01 X36.60444 Y94.37048
G01 X36.60365 Y94.32395
G01 X36.60355 Y94.30607
G01 X36.60375 Y94.23848
G01 X36.64650 Y94.21247
G01 X36.78171 Y94.14519
G01 X36.79687 Y94.13927
G01 X36.84000 Y94.12093
G01 X36.86433 Y94.10968
G01 X36.94429 Y94.07838
G01 X37.01208 Y94.05646
G01 X37.05587 Y94.04069
G01 X37.06677 Y94.03625
G01 X37.07632 Y94.03119
G01 X37.21445 Y93.95690
G01 X37.23421 Y93.94585
G01 X37.27139 Y93.91811
G01 X37.34076 Y93.86266
G01 X37.38374 Y93.82832
G01 X37.39324 Y93.81933
G01 X37.44096 Y93.76960
G01 X37.51193 Y93.68796
G01 X37.54079 Y93.64864
G01 X37.57873 Y93.59119
G01 X37.61569 Y93.52880
G01 X37.65257 Y93.45283
G01 X37.67957 Y93.38956
G01 X37.69235 Y93.35494
G01 X37.72453 Y93.23932
G01 X37.73974 Y93.17196
G01 X37.73992 Y93.17087
G01 X37.75399 Y93.01578
G01 X37.75625 Y92.98133
G01 X37.75399 Y92.94687
G01 X37.73992 Y92.79177
G01 X37.73974 Y92.79068
G01 X37.72453 Y92.72335
G01 X37.69235 Y92.60770
G01 X37.67957 Y92.57308
G01 X37.65257 Y92.50981
G01 X37.61569 Y92.43384
G01 X37.57873 Y92.37145
G01 X37.54079 Y92.31400
G01 X37.51193 Y92.27468
G01 X37.44096 Y92.19304
G01 X37.39324 Y92.14331
G01 X37.38374 Y92.13432
G01 X37.27139 Y92.04453
G01 X37.23426 Y92.01679
G01 X37.21440 Y92.00572
G01 X37.19120 Y91.99325
G01 X37.16197 Y91.97750
G01 X37.14211 Y91.96640
G01 X37.13078 Y91.95985
G01 X37.07886 Y91.92660
G01 X37.01876 Y91.88438
G01 X37.01485 Y91.88161
G01 X36.96227 Y91.84420
G01 X36.88567 Y91.78288
G01 X36.80772 Y91.71326
G01 X36.80286 Y91.70844
G01 X36.79265 Y91.61141
G01 X36.79265 Y91.55022
G01 X36.80337 Y91.44837
G01 X36.83502 Y91.35093
G01 X36.87988 Y91.27323
G01 X36.88265 Y91.27130
G01 X36.89088 Y91.26559
G01 X36.95206 Y91.23442
G01 X37.20474 Y91.15004
G01 X37.26593 Y91.14037
G01 X37.37680 Y91.13158
G01 X44.21456 Y91.13158
G01 X44.26975 Y91.13376
G01 X44.30074 Y91.13620
G01 X44.42195 Y91.15617
G01 X44.45982 Y91.16566
G01 X44.47526 Y91.16970
G01 X44.53064 Y91.18471
G01 X44.53846 Y91.18680
G01 X44.58106 Y91.19792
G01 X44.64529 Y91.40859
G01 X44.65499 Y91.46978
G01 X44.66381 Y91.58080
G01 X44.66381 Y94.62931
G01 X44.66465 Y94.66375
G01 X44.66632 Y94.69807
G01 X44.67138 Y94.73205
G01 X44.68479 Y94.79952
G01 X44.69315 Y94.83284
G01 X44.70470 Y94.86517
G01 X44.73104 Y94.92875
G01 X44.74572 Y94.95982
G01 X44.76338 Y94.98925
G01 X44.80165 Y95.04656
G01 X44.82210 Y95.07409
G01 X44.84519 Y95.09959
G01 X44.86889 Y95.12448
G01 X45.47859 Y95.73418
G01 X45.48758 Y95.74335
G01 X45.49269 Y95.74864
G01 X45.57160 Y95.84658
G01 X45.60153 Y95.89116
G01 X45.60282 Y95.89984
G01 X45.61095 Y95.99456
G01 X45.61136 Y96.01450
G01 X45.61410 Y96.06378
G01 X45.62817 Y96.21887
G01 X45.62835 Y96.21996
G01 X45.64354 Y96.28727
G01 X45.67569 Y96.40289
G01 X45.68850 Y96.43751
G01 X45.70899 Y96.48707
G01 X45.71552 Y96.50088
G01 X45.75240 Y96.57683
G01 X45.76965 Y96.60596
G01 X45.77894 Y96.62214
G01 X45.78413 Y96.63144
G01 X45.78862 Y96.63962
G01 X45.82182 Y96.70114
G01 X45.84592 Y96.74998
G01 X45.87191 Y96.80782
G01 X45.88903 Y96.84886
G01 X45.92073 Y96.93108
G01 X45.85570 Y97.01338
G01 X45.83010 Y97.04208
G01 X45.80457 Y97.07221
G01 X45.78999 Y97.09034
G01 X45.71181 Y97.17340
G01 X45.66721 Y97.21381
G01 X45.66513 Y97.21569
G01 X45.62451 Y97.25277
G01 X45.61616 Y97.26055
G01 X45.60175 Y97.27414
G01 X45.45525 Y97.38209
G01 X45.45484 Y97.38231
G01 X45.39848 Y97.41752
G01 X45.37948 Y97.43040
G01 X45.34704 Y97.45143
G01 X45.34704 Y99.99349
G01 X45.43856 Y100.14616
G01 X45.46523 Y100.18614
G01 X45.58329 Y100.34533
G01 X45.60887 Y100.37652
G01 X45.74067 Y100.52193
G01 X45.76744 Y100.54870
G01 X45.91285 Y100.68050
G01 X45.94404 Y100.70608
G01 X45.97602 Y100.72981
G01 X46.13269 Y100.76905
G01 X46.16599 Y100.77568
G01 X46.36200 Y100.80476
G01 X46.38870 Y100.80740
G01 X46.58476 Y100.81703
G01 X46.60932 Y100.81703
G01 X46.80538 Y100.80740
G01 X46.83208 Y100.80476
G01 X47.02809 Y100.77568
G01 X47.06139 Y100.76905
G01 X47.25745 Y100.71995
G01 X47.28991 Y100.71055
G01 X47.29919 Y100.70240
G01 X47.44460 Y100.57057
G01 X47.47528 Y100.53989
G01 X47.60711 Y100.39448
G01 X47.63624 Y100.35894
G01 X47.75430 Y100.19973
G01 X47.78422 Y100.15490
G01 X47.83619 Y100.06821
G01 X47.85075 Y99.97024
G01 X47.85621 Y99.91482
G01 X47.86583 Y99.71878
G01 X47.86647 Y99.69234
G01 X47.86647 Y98.19232
G01 X47.86583 Y98.16588
G01 X47.85621 Y97.96984
G01 X47.85075 Y97.91444
G01 X47.82166 Y97.71838
G01 X47.80912 Y97.65557
G01 X47.76002 Y97.45956
G01 X47.73693 Y97.38366
G01 X47.66680 Y97.18762
G01 X47.64590 Y97.13733
G01 X47.61501 Y97.10642
G01 X47.54696 Y97.05062
G01 X47.50073 Y97.05062
G01 X47.41023 Y97.04693
G01 X47.39629 Y97.04576
G01 X47.32276 Y97.04262
G01 X47.21679 Y97.04262
G01 X47.15240 Y97.03952
G01 X47.10460 Y97.03482
G01 X47.05138 Y97.03215
G01 X46.98628 Y97.03215
G01 X46.94138 Y97.02997
G01 X46.84994 Y97.02097
G01 X46.81107 Y97.01904
G01 X46.78273 Y97.01904
G01 X46.74554 Y97.01722
G01 X46.61554 Y97.00444
G01 X46.58938 Y97.00276
G01 X46.57836 Y97.00246
G01 X46.55131 Y97.00073
G01 X46.39220 Y96.98506
G01 X46.37950 Y96.98361
G01 X46.34519 Y96.97929
G01 X46.33101 Y96.97769
G01 X46.17635 Y96.96245
G01 X46.11910 Y96.95435
G01 X46.10800 Y96.95232
G01 X46.04031 Y96.94287
G01 X45.92240 Y96.93126
G01 X45.92073 Y96.93108
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.64590 Y97.13733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.64590 Y97.13733
G01 X47.64592 Y96.96845
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.54696 Y97.05062 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.54696 Y97.05062
G01 X47.64059 Y96.97378
G01 X47.64592 Y96.96845
G01 X47.68123 Y96.88346
G01 X47.73734 Y96.72664
G01 X47.76040 Y96.65077
G01 X47.79969 Y96.49395
G01 X47.81257 Y96.42938
G01 X47.83584 Y96.27256
G01 X47.84160 Y96.21424
G01 X47.84930 Y96.05740
G01 X47.84930 Y96.00124
G01 X47.84160 Y95.84442
G01 X47.83584 Y95.78613
G01 X47.81257 Y95.62928
G01 X47.79969 Y95.56469
G01 X47.76040 Y95.40787
G01 X47.73734 Y95.33200
G01 X47.68123 Y95.17518
G01 X47.64592 Y95.09017
G01 X47.64059 Y95.08486
G01 X47.51935 Y94.98537
G01 X47.43950 Y94.93200
G01 X47.30119 Y94.85806
G01 X47.21244 Y94.82131
G01 X47.06236 Y94.77579
G01 X46.96815 Y94.75705
G01 X46.81209 Y94.74168
G01 X46.71603 Y94.74168
G01 X46.70096 Y94.74315
G01 X46.66896 Y94.74630
G01 X46.20404 Y94.28138
G01 X46.20401 Y94.14031
G01 X46.22692 Y94.15255
G01 X46.31567 Y94.18931
G01 X46.46574 Y94.23485
G01 X46.55994 Y94.25359
G01 X46.71603 Y94.26896
G01 X46.81209 Y94.26896
G01 X46.82705 Y94.26749
G01 X46.85911 Y94.26431
G01 X47.64595 Y95.05115
G01 X47.64592 Y95.09017
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.20401 Y94.14031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.20401 Y94.14031
G01 X46.12558 Y94.00942
G01 X46.08456 Y93.93292
G01 X46.01036 Y93.77607
G01 X45.98720 Y93.72030
G01 X45.93109 Y93.56348
G01 X45.91852 Y93.52218
G01 X45.87925 Y93.36536
G01 X45.87290 Y93.33358
G01 X45.84963 Y93.17676
G01 X45.84704 Y93.15045
G01 X45.83935 Y92.99360
G01 X45.83935 Y92.96904
G01 X45.84704 Y92.81222
G01 X45.84963 Y92.78591
G01 X45.87290 Y92.62906
G01 X45.87925 Y92.59728
G01 X45.91852 Y92.44047
G01 X45.93109 Y92.39916
G01 X45.98720 Y92.24235
G01 X46.01036 Y92.18657
G01 X46.06403 Y92.07311
G01 X46.06403 Y91.26765
G01 X46.12807 Y91.11304
G01 X46.14003 Y91.08604
G01 X46.17120 Y91.02017
G01 X46.19467 Y90.97621
G01 X46.23101 Y90.91553
G01 X46.25486 Y90.87981
G01 X46.29617 Y90.82411
G01 X46.32101 Y90.79383
G01 X46.36713 Y90.74293
G01 X46.38019 Y90.72922
G01 X52.77690 Y84.33248
G01 X52.79061 Y84.31942
G01 X52.84152 Y84.27330
G01 X52.86923 Y84.25039
G01 X52.87238 Y84.24957
G01 X52.94098 Y84.23240
G01 X52.97598 Y84.22542
G01 X53.04459 Y84.21523
G01 X53.07659 Y84.21208
G01 X53.14522 Y84.20871
G01 X53.16077 Y84.20833
G01 X107.23343 Y84.20833
G01 X107.24895 Y84.20794
G01 X107.31756 Y84.20457
G01 X107.34956 Y84.20142
G01 X107.41817 Y84.19123
G01 X107.44806 Y84.18549
G01 X107.45220 Y84.18247
G01 X107.50790 Y84.14114
G01 X107.53356 Y84.12011
G01 X107.58446 Y84.07398
G01 X107.59604 Y84.06296
G01 X111.86593 Y79.79307
G01 X111.87696 Y79.78149
G01 X111.92311 Y79.73061
G01 X111.94414 Y79.70496
G01 X111.98544 Y79.64923
G01 X111.98852 Y79.64506
G01 X111.99423 Y79.61522
G01 X112.00442 Y79.54659
G01 X112.00757 Y79.51458
G01 X112.01094 Y79.44595
G01 X112.01132 Y79.43043
G01 X112.01132 Y71.25430
G01 X112.01094 Y71.23878
G01 X112.00757 Y71.17018
G01 X112.00442 Y71.13817
G01 X111.99530 Y71.07665
G01 X111.99154 Y71.07038
G01 X111.97279 Y71.04229
G01 X111.93147 Y70.98658
G01 X111.91221 Y70.96311
G01 X111.86609 Y70.91221
G01 X111.85600 Y70.90165
G01 X108.99680 Y68.04247
G01 X108.98624 Y68.03239
G01 X108.93533 Y67.98626
G01 X108.91186 Y67.96701
G01 X108.85616 Y67.92568
G01 X108.82807 Y67.90694
G01 X108.80163 Y67.89111
G01 X108.76292 Y67.88535
G01 X108.72916 Y67.88202
G01 X108.66056 Y67.87864
G01 X108.64415 Y67.87823
G01 X100.24013 Y67.87823
G01 X100.22369 Y67.87864
G01 X100.15506 Y67.88202
G01 X100.12131 Y67.88535
G01 X100.05270 Y67.89553
G01 X100.01587 Y67.90287
G01 X99.94729 Y67.92004
G01 X99.90507 Y67.93289
G01 X99.83647 Y67.95746
G01 X99.81188 Y67.96693
G01 X99.24597 Y68.20135
G01 X98.84696 Y68.60036
G01 X98.81465 Y68.63599
G01 X98.77114 Y68.68903
G01 X98.71778 Y68.76888
G01 X98.68542 Y68.82939
G01 X98.64866 Y68.91814
G01 X98.62875 Y68.98379
G01 X98.61001 Y69.07800
G01 X98.60330 Y69.14630
G01 X98.60094 Y69.19431
G01 X98.60094 Y72.10200
G01 X98.52906 Y72.16100
G01 X98.46111 Y72.22892
G01 X98.35542 Y72.35773
G01 X98.30206 Y72.43758
G01 X98.22349 Y72.58455
G01 X98.18674 Y72.67330
G01 X98.17092 Y72.72534
G01 X98.17092 Y73.55620
G01 X98.15514 Y73.60832
G01 X98.11839 Y73.69707
G01 X98.03983 Y73.84403
G01 X97.98646 Y73.92389
G01 X97.88075 Y74.05269
G01 X97.81283 Y74.12064
G01 X97.68402 Y74.22633
G01 X97.60417 Y74.27969
G01 X97.45720 Y74.35826
G01 X97.36845 Y74.39501
G01 X97.31633 Y74.41083
G01 X96.48547 Y74.41083
G01 X96.43343 Y74.42661
G01 X96.34468 Y74.46336
G01 X96.19772 Y74.54192
G01 X96.11786 Y74.59529
G01 X96.04410 Y74.65582
G01 X95.98906 Y74.70100
G01 X95.92111 Y74.76892
G01 X95.81542 Y74.89773
G01 X95.76206 Y74.97758
G01 X95.68349 Y75.12455
G01 X95.64674 Y75.21330
G01 X95.63092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.48547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.48547 Y74.41083
G01 X96.43343 Y74.39501
G01 X96.34468 Y74.35826
G01 X96.19772 Y74.27969
G01 X96.11786 Y74.22633
G01 X95.98906 Y74.12064
G01 X95.92111 Y74.05269
G01 X95.81542 Y73.92389
G01 X95.76206 Y73.84403
G01 X95.68349 Y73.69707
G01 X95.64674 Y73.60832
G01 X95.63092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X94.77633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X94.77633 Y74.41083
G01 X94.82845 Y74.39501
G01 X94.91720 Y74.35826
G01 X95.06417 Y74.27969
G01 X95.14402 Y74.22633
G01 X95.27283 Y74.12064
G01 X95.34075 Y74.05269
G01 X95.44646 Y73.92389
G01 X95.49983 Y73.84403
G01 X95.57839 Y73.69707
G01 X95.61514 Y73.60832
G01 X95.63092 Y73.55620
G01 X95.63092 Y72.72534
G01 X95.61514 Y72.67330
G01 X95.57839 Y72.58455
G01 X95.49983 Y72.43758
G01 X95.44646 Y72.35773
G01 X95.38593 Y72.28397
G01 X95.34075 Y72.22892
G01 X95.27283 Y72.16100
G01 X95.17587 Y72.08143
G01 X95.17326 Y69.94249
G01 X95.20948 Y69.91277
G01 X95.27740 Y69.84485
G01 X95.37689 Y69.72362
G01 X95.43026 Y69.64376
G01 X95.50419 Y69.50543
G01 X95.54095 Y69.41671
G01 X95.58647 Y69.26662
G01 X95.60521 Y69.17241
G01 X95.60851 Y69.13878
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.06810 Y69.22403 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.06810 Y69.22403
G01 X96.06330 Y69.27330
G01 X96.06094 Y69.32131
G01 X96.06094 Y72.10200
G01 X95.98906 Y72.16100
G01 X95.92111 Y72.22892
G01 X95.81542 Y72.35773
G01 X95.76206 Y72.43758
G01 X95.68349 Y72.58455
G01 X95.64674 Y72.67330
G01 X95.63092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.17092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.17092 Y72.72534
G01 X98.15514 Y72.67330
G01 X98.11839 Y72.58455
G01 X98.03983 Y72.43758
G01 X97.98646 Y72.35773
G01 X97.92593 Y72.28397
G01 X97.88075 Y72.22892
G01 X97.81283 Y72.16100
G01 X97.74092 Y72.10200
G01 X97.74092 Y69.66926
G01 X99.20886 Y68.20132
G01 X99.24597 Y68.20135
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X100.64089 Y72.55186 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X100.64089 Y72.55186
G01 X100.64094 Y72.54081
G01 X100.64330 Y72.49278
G01 X100.64810 Y72.44401
G01 X100.66685 Y72.34980
G01 X100.68107 Y72.30291
G01 X100.71782 Y72.21417
G01 X100.74094 Y72.17094
G01 X100.79430 Y72.09108
G01 X100.82539 Y72.05318
G01 X100.89331 Y71.98526
G01 X100.93118 Y71.95417
G01 X101.01107 Y71.90081
G01 X101.05427 Y71.87769
G01 X101.14302 Y71.84094
G01 X101.18993 Y71.82671
G01 X101.28414 Y71.80797
G01 X101.33291 Y71.80317
G01 X101.38094 Y71.80081
G01 X102.58094 Y71.80081
G01 X102.62897 Y71.80317
G01 X102.67774 Y71.80797
G01 X102.77195 Y71.82671
G01 X102.81884 Y71.84094
G01 X102.90758 Y71.87769
G01 X102.95081 Y71.90081
G01 X103.03067 Y71.95417
G01 X103.06857 Y71.98526
G01 X103.13649 Y72.05318
G01 X103.16758 Y72.09108
G01 X103.22094 Y72.17094
G01 X103.24406 Y72.21417
G01 X103.28081 Y72.30291
G01 X103.28579 Y72.31932
G01 X107.45548 Y72.31932
G01 X107.48548 Y72.28277
G01 X107.55340 Y72.21485
G01 X107.67463 Y72.11536
G01 X107.75449 Y72.06199
G01 X107.89282 Y71.98806
G01 X107.93117 Y71.97218
G01 X107.98154 Y71.95130
G01 X108.13163 Y71.90578
G01 X108.22584 Y71.88704
G01 X108.38192 Y71.87167
G01 X108.47796 Y71.87167
G01 X108.63404 Y71.88704
G01 X108.72825 Y71.90578
G01 X108.87834 Y71.95130
G01 X108.96706 Y71.98806
G01 X108.97399 Y71.99176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X109.22141 Y74.17360 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X109.22141 Y74.17360
G01 X109.30648 Y74.10377
G01 X109.37440 Y74.03585
G01 X109.47389 Y73.91462
G01 X109.52726 Y73.83476
G01 X109.60119 Y73.69643
G01 X109.63795 Y73.60771
G01 X109.64732 Y73.57680
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X109.64732 Y72.74180 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X109.64732 Y72.74180
G01 X109.64735 Y72.66507
G01 X109.59736 Y72.61510
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X107.77742 Y69.23515 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X107.77742 Y69.23515
G01 X100.58806 Y69.23513
G01 X100.28092 Y69.54226
G01 X100.28092 Y72.10200
G01 X100.31922 Y72.13342
G01 X100.35283 Y72.16100
G01 X100.42075 Y72.22892
G01 X100.52646 Y72.35773
G01 X100.57983 Y72.43758
G01 X100.64089 Y72.55186
G01 X100.65021 Y72.58897
G01 X100.66862 Y72.68137
G01 X100.69334 Y72.84802
G01 X100.70172 Y72.93294
G01 X100.70990 Y73.09956
G01 X100.70990 Y73.18208
G01 X100.70172 Y73.34873
G01 X100.69334 Y73.43367
G01 X100.66862 Y73.60029
G01 X100.65021 Y73.69267
G01 X100.64091 Y73.72976
G01 X100.57983 Y73.84403
G01 X100.52646 Y73.92389
G01 X100.51257 Y73.94083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X100.66954 Y73.94083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X100.66954 Y73.94083
G01 X100.66685 Y73.93182
G01 X100.64810 Y73.83761
G01 X100.64330 Y73.78884
G01 X100.64094 Y73.74081
G01 X100.64091 Y73.72976
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.17092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.17092 Y73.55620
G01 X98.18674 Y73.60832
G01 X98.22349 Y73.69707
G01 X98.30206 Y73.84403
G01 X98.35542 Y73.92389
G01 X98.46111 Y74.05269
G01 X98.52906 Y74.12064
G01 X98.58913 Y74.16997
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.93007 Y74.82902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.93007 Y74.82902
G01 X97.96944 Y74.75539
G01 X98.02281 Y74.67550
G01 X98.17828 Y74.48609
G01 X98.24620 Y74.41817
G01 X98.28600 Y74.38551
G01 X98.43561 Y74.26270
G01 X98.51549 Y74.20934
G01 X98.58913 Y74.16997
G01 X98.69548 Y74.18046
G01 X98.78036 Y74.18510
G01 X98.78829 Y74.18518
G01 X98.86035 Y74.18899
G01 X98.96944 Y74.19971
G01 X99.03167 Y74.20283
G01 X99.12062 Y74.20283
G01 X99.17249 Y74.20537
G01 X99.20409 Y74.20847
G01 X99.25181 Y74.21083
G01 X99.44094 Y74.21083
G01 X99.46256 Y74.21030
G01 X99.62915 Y74.20212
G01 X99.67444 Y74.19765
G01 X99.84109 Y74.17291
G01 X99.89260 Y74.16265
G01 X100.05923 Y74.12092
G01 X100.12186 Y74.10187
G01 X100.28851 Y74.04223
G01 X100.36781 Y74.00929
G01 X100.51257 Y73.94083
G01 X100.66954 Y73.94083
G01 X100.70934 Y73.97035
G01 X100.79369 Y74.02689
G01 X100.84269 Y74.05625
G01 X100.91234 Y74.09359
G01 X100.96136 Y74.11678
G01 X101.02057 Y74.14139
G01 X101.06959 Y74.15892
G01 X101.12118 Y74.17461
G01 X101.17017 Y74.18691
G01 X101.21719 Y74.19628
G01 X101.26621 Y74.20354
G01 X101.31033 Y74.20789
G01 X101.35933 Y74.21030
G01 X101.38094 Y74.21083
G01 X102.58094 Y74.21083
G01 X102.60253 Y74.21030
G01 X102.65153 Y74.20789
G01 X102.69567 Y74.20354
G01 X102.74467 Y74.19628
G01 X102.79158 Y74.18691
G01 X102.84060 Y74.17464
G01 X102.89227 Y74.15892
G01 X102.94129 Y74.14139
G01 X103.00050 Y74.11678
G01 X103.04952 Y74.09359
G01 X103.11917 Y74.05625
G01 X103.16816 Y74.02689
G01 X103.25274 Y73.97017
G01 X107.46930 Y73.97007
G01 X107.53041 Y73.99897
G01 X107.61169 Y74.03276
G01 X107.76851 Y74.08886
G01 X107.83361 Y74.10865
G01 X107.99043 Y74.14794
G01 X108.04481 Y74.15879
G01 X108.20165 Y74.18203
G01 X108.24991 Y74.18681
G01 X108.36292 Y74.19237
G01 X108.38626 Y74.19410
G01 X108.40658 Y74.19608
G01 X108.45352 Y74.19839
G01 X108.61110 Y74.19839
G01 X108.63208 Y74.19796
G01 X108.66264 Y74.19671
G01 X108.68519 Y74.19625
G01 X108.82639 Y74.19625
G01 X108.89347 Y74.19290
G01 X108.94379 Y74.18795
G01 X109.02401 Y74.18409
G01 X109.06655 Y74.18409
G01 X109.16538 Y74.17911
G01 X109.22141 Y74.17360
G01 X109.28837 Y74.20934
G01 X109.36825 Y74.26270
G01 X109.55766 Y74.41817
G01 X109.62558 Y74.48609
G01 X109.64730 Y74.51254
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X109.51585 Y76.97758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X109.51585 Y76.97758
G01 X109.56942 Y76.99709
G01 X109.64133 Y77.03859
G01 X109.64735 Y77.05028
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X109.64732 Y76.84908 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X109.64732 Y76.84908
G01 X109.62558 Y76.87555
G01 X109.55766 Y76.94347
G01 X109.51618 Y76.97753
G01 X109.51585 Y76.97758
G01 X109.48514 Y76.98289
G01 X109.40038 Y77.00120
G01 X109.30843 Y77.02604
G01 X109.23396 Y77.05050
G01 X109.21544 Y77.05688
G01 X109.16010 Y77.07667
G01 X109.09307 Y77.10450
G01 X109.09058 Y77.10567
G01 X109.00676 Y77.14532
G01 X108.94400 Y77.17136
G01 X108.94316 Y77.17166
G01 X108.87702 Y77.19533
G01 X108.70884 Y77.24337
G01 X108.67544 Y77.25200
G01 X108.64125 Y77.25680
G01 X108.46754 Y77.27677
G01 X108.39736 Y77.28022
G01 X108.36294 Y77.28106
G01 X99.44094 Y77.28106
G01 X99.40650 Y77.28022
G01 X99.33629 Y77.27677
G01 X99.16258 Y77.25680
G01 X99.12839 Y77.25200
G01 X99.09499 Y77.24334
G01 X98.92682 Y77.19533
G01 X98.86068 Y77.17166
G01 X98.79708 Y77.14532
G01 X98.73350 Y77.11525
G01 X98.68224 Y77.08677
G01 X98.58788 Y77.01680
G01 X98.53716 Y76.97517
G01 X98.35537 Y76.81042
G01 X98.31133 Y76.76638
G01 X98.14658 Y76.58459
G01 X98.10495 Y76.53387
G01 X98.01051 Y76.40654
G01 X97.98842 Y76.31827
G01 X97.97549 Y76.25338
G01 X97.96007 Y76.14957
G01 X97.96294 Y76.09003
G01 X97.96294 Y76.00113
G01 X97.96545 Y75.94926
G01 X97.96855 Y75.91764
G01 X97.97092 Y75.86994
G01 X97.97092 Y75.49173
G01 X97.96855 Y75.44406
G01 X97.96545 Y75.41241
G01 X97.96294 Y75.36054
G01 X97.96294 Y75.27161
G01 X97.95982 Y75.20933
G01 X97.94907 Y75.10029
G01 X97.94529 Y75.02818
G01 X97.94521 Y75.02031
G01 X97.94056 Y74.93539
G01 X97.93007 Y74.82902
G01 X97.88075 Y74.76892
G01 X97.81283 Y74.70100
G01 X97.68402 Y74.59529
G01 X97.60417 Y74.54192
G01 X97.45720 Y74.46336
G01 X97.36845 Y74.42661
G01 X97.31633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.63092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.63092 Y76.09620
G01 X95.61514 Y76.14832
G01 X95.57839 Y76.23707
G01 X95.49983 Y76.38403
G01 X95.44646 Y76.46389
G01 X95.34075 Y76.59269
G01 X95.27283 Y76.66064
G01 X95.20092 Y76.71964
G01 X95.20092 Y76.77639
G01 X95.56988 Y77.14532
G01 X95.69454 Y77.14532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.56828 Y77.39932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.56828 Y77.39932
G01 X93.54875 Y77.33486
G01 X93.53001 Y77.24065
G01 X93.52330 Y77.17235
G01 X93.52094 Y77.12432
G01 X93.52094 Y76.71962
G01 X93.44906 Y76.66064
G01 X93.38111 Y76.59269
G01 X93.27542 Y76.46389
G01 X93.22206 Y76.38403
G01 X93.14349 Y76.23707
G01 X93.10674 Y76.14832
G01 X93.09092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.09092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.09092 Y75.26534
G01 X93.07514 Y75.21330
G01 X93.03839 Y75.12455
G01 X92.95983 Y74.97758
G01 X92.90646 Y74.89773
G01 X92.80075 Y74.76892
G01 X92.73283 Y74.70100
G01 X92.67270 Y74.65168
G01 X92.56635 Y74.64119
G01 X92.48144 Y74.63654
G01 X92.47357 Y74.63646
G01 X92.40146 Y74.63268
G01 X92.29242 Y74.62193
G01 X92.23013 Y74.61881
G01 X92.14121 Y74.61881
G01 X92.08934 Y74.61629
G01 X92.05769 Y74.61320
G01 X92.01002 Y74.61083
G01 X91.63181 Y74.61083
G01 X91.58411 Y74.61320
G01 X91.55249 Y74.61629
G01 X91.50062 Y74.61881
G01 X91.41172 Y74.61881
G01 X91.34944 Y74.62193
G01 X91.24037 Y74.63268
G01 X91.16829 Y74.63649
G01 X91.16039 Y74.63654
G01 X91.07550 Y74.64121
G01 X90.96913 Y74.65168
G01 X90.89549 Y74.61231
G01 X90.81561 Y74.55894
G01 X90.62620 Y74.40347
G01 X90.55828 Y74.33555
G01 X90.52559 Y74.29575
G01 X90.40281 Y74.14614
G01 X90.34944 Y74.06626
G01 X90.31007 Y73.99260
G01 X90.32054 Y73.88625
G01 X90.32521 Y73.80136
G01 X90.32526 Y73.79346
G01 X90.32907 Y73.72138
G01 X90.33982 Y73.61231
G01 X90.34294 Y73.55003
G01 X90.34294 Y73.46113
G01 X90.34545 Y73.40926
G01 X90.34855 Y73.37764
G01 X90.35092 Y73.32994
G01 X90.35092 Y73.14081
G01 X90.35038 Y73.11919
G01 X90.34220 Y72.95259
G01 X90.33773 Y72.90733
G01 X90.31302 Y72.74071
G01 X90.30273 Y72.68915
G01 X90.26100 Y72.52252
G01 X90.24195 Y72.45989
G01 X90.21835 Y72.39387
G01 X90.15374 Y72.31673
G01 X90.13090 Y72.29077
G01 X90.12699 Y72.28719
G01 X90.10542 Y72.26753
G01 X90.08305 Y72.24627
G01 X90.04711 Y72.21053
G01 X89.98950 Y72.14609
G01 X89.97926 Y72.13322
G01 X89.96941 Y72.07574
G01 X89.95925 Y71.99862
G01 X89.95318 Y71.90637
G01 X89.95318 Y70.10081
G01 X89.95424 Y70.06215
G01 X89.95605 Y70.02936
G01 X89.97627 Y69.89507
G01 X89.97792 Y69.88839
G01 X90.02326 Y69.83264
G01 X90.04383 Y69.80846
G01 X90.08477 Y69.76235
G01 X90.08985 Y69.75661
G01 X90.16082 Y69.67498
G01 X90.18968 Y69.63563
G01 X90.22046 Y69.59004
G01 X90.22404 Y69.57627
G01 X90.26331 Y69.41948
G01 X90.27510 Y69.36032
G01 X90.29836 Y69.20350
G01 X90.30360 Y69.15062
G01 X90.31129 Y68.99380
G01 X90.31129 Y68.94282
G01 X90.30360 Y68.78600
G01 X90.29836 Y68.73315
G01 X90.27510 Y68.57633
G01 X90.26331 Y68.51717
G01 X90.22404 Y68.36038
G01 X90.22046 Y68.34661
G01 X90.18968 Y68.30102
G01 X90.16082 Y68.26167
G01 X90.08985 Y68.18004
G01 X90.04210 Y68.13030
G01 X90.03263 Y68.12136
G01 X89.92028 Y68.03155
G01 X89.88310 Y68.00379
G01 X89.86329 Y67.99271
G01 X89.72519 Y67.91844
G01 X89.71564 Y67.91341
G01 X89.66098 Y67.89319
G01 X89.53545 Y67.85263
G01 X89.51112 Y67.84694
G01 X89.44342 Y67.83457
G01 X89.34795 Y67.82190
G01 X89.28739 Y67.81892
G01 X89.21848 Y67.81892
G01 X89.15790 Y67.82190
G01 X89.06242 Y67.83455
G01 X89.01107 Y67.84331
G01 X88.99473 Y67.84694
G01 X88.97043 Y67.85263
G01 X88.84487 Y67.89319
G01 X88.79021 Y67.91341
G01 X88.78066 Y67.91844
G01 X88.64256 Y67.99271
G01 X88.62275 Y68.00379
G01 X88.58556 Y68.03155
G01 X88.47322 Y68.12134
G01 X88.46375 Y68.13030
G01 X88.41599 Y68.18004
G01 X88.35270 Y68.25286
G01 X88.34297 Y68.26381
G01 X88.33471 Y68.27292
G01 X88.31160 Y68.29726
G01 X88.26024 Y68.34884
G01 X88.25669 Y68.35238
G01 X88.19936 Y68.40922
G01 X88.14030 Y68.46254
G01 X88.06375 Y68.52568
G01 X88.03786 Y68.54544
G01 X87.99532 Y68.54740
G01 X87.92842 Y68.54465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.03786 Y68.54544 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.03786 Y68.54544
G01 X88.03698 Y68.54613
G01 X87.99941 Y68.67000
G01 X87.98292 Y68.75273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.98292 Y69.18374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.98292 Y69.18374
G01 X87.99941 Y69.26662
G01 X88.04493 Y69.41671
G01 X88.08168 Y69.50543
G01 X88.15562 Y69.64376
G01 X88.20898 Y69.72362
G01 X88.30848 Y69.84485
G01 X88.37640 Y69.91277
G01 X88.41295 Y69.94277
G01 X88.41295 Y72.12499
G01 X88.36906 Y72.16100
G01 X88.30111 Y72.22892
G01 X88.19542 Y72.35773
G01 X88.14206 Y72.43758
G01 X88.06349 Y72.58455
G01 X88.02674 Y72.67330
G01 X88.01092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.47092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.47092 Y73.55620
G01 X85.48674 Y73.60832
G01 X85.52349 Y73.69707
G01 X85.60206 Y73.84403
G01 X85.65542 Y73.92389
G01 X85.76111 Y74.05269
G01 X85.82906 Y74.12064
G01 X85.88913 Y74.16997
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.23007 Y74.82902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.23007 Y74.82902
G01 X85.26944 Y74.75539
G01 X85.32281 Y74.67550
G01 X85.47828 Y74.48609
G01 X85.54620 Y74.41817
G01 X85.58600 Y74.38551
G01 X85.73561 Y74.26270
G01 X85.81549 Y74.20934
G01 X85.88913 Y74.16997
G01 X85.99548 Y74.18046
G01 X86.08036 Y74.18510
G01 X86.08829 Y74.18518
G01 X86.16035 Y74.18899
G01 X86.26944 Y74.19971
G01 X86.33167 Y74.20283
G01 X86.42062 Y74.20283
G01 X86.47249 Y74.20537
G01 X86.50409 Y74.20847
G01 X86.55181 Y74.21083
G01 X86.93002 Y74.21083
G01 X86.97774 Y74.20847
G01 X87.00934 Y74.20537
G01 X87.06121 Y74.20283
G01 X87.15016 Y74.20283
G01 X87.21242 Y74.19973
G01 X87.32146 Y74.18899
G01 X87.39359 Y74.18518
G01 X87.40144 Y74.18510
G01 X87.48638 Y74.18046
G01 X87.59268 Y74.16999
G01 X87.66636 Y74.20934
G01 X87.74625 Y74.26270
G01 X87.93566 Y74.41817
G01 X88.00357 Y74.48609
G01 X88.03624 Y74.52587
G01 X88.15905 Y74.67550
G01 X88.21241 Y74.75539
G01 X88.25176 Y74.82902
G01 X88.24129 Y74.93537
G01 X88.23665 Y75.02031
G01 X88.23657 Y75.02816
G01 X88.23276 Y75.10029
G01 X88.22201 Y75.20933
G01 X88.21892 Y75.27159
G01 X88.21892 Y75.36054
G01 X88.21638 Y75.41241
G01 X88.21328 Y75.44400
G01 X88.21091 Y75.49173
G01 X88.21091 Y75.68081
G01 X88.21145 Y75.70242
G01 X88.21963 Y75.86907
G01 X88.22410 Y75.91439
G01 X88.24884 Y76.08099
G01 X88.25910 Y76.13250
G01 X88.30083 Y76.29912
G01 X88.31988 Y76.36176
G01 X88.34350 Y76.42775
G01 X88.40810 Y76.50494
G01 X88.44162 Y76.54217
G01 X88.45524 Y76.55556
G01 X88.47802 Y76.57900
G01 X88.48638 Y76.58733
G01 X88.55486 Y76.66574
G01 X88.56446 Y76.72198
G01 X88.57459 Y76.79909
G01 X88.58069 Y76.89135
G01 X88.58069 Y79.03783
G01 X88.59578 Y79.07422
G01 X88.60822 Y79.10651
G01 X88.67149 Y79.28332
G01 X88.68099 Y79.30795
G01 X88.69826 Y79.34964
G01 X88.70771 Y79.37432
G01 X88.71450 Y79.39360
G01 X88.72331 Y79.41664
G01 X88.74970 Y79.48037
G01 X88.76784 Y79.51870
G01 X88.80017 Y79.57918
G01 X88.82120 Y79.61443
G01 X88.82201 Y79.61562
G01 X88.84365 Y79.65190
G01 X88.85656 Y79.67603
G01 X88.86801 Y79.69624
G01 X88.97164 Y79.86917
G01 X88.99974 Y79.92180
G01 X89.06314 Y80.05586
G01 X90.13911 Y81.13180
G01 X90.15452 Y81.14773
G01 X90.17086 Y81.16513
G01 X90.17827 Y81.17290
G01 X90.19803 Y81.19332
G01 X90.22557 Y81.22342
G01 X90.27515 Y81.28080
G01 X90.29752 Y81.30785
G01 X90.32199 Y81.33866
G01 X90.35097 Y81.37338
G01 X90.38396 Y81.41100
G01 X90.42320 Y81.45928
G01 X90.42353 Y81.45966
G01 X90.43941 Y81.46449
G01 X90.53362 Y81.48324
G01 X90.60192 Y81.48994
G01 X90.64995 Y81.49230
G01 X92.19008 Y81.49230
G01 X92.22008 Y81.52885
G01 X92.28800 Y81.59677
G01 X92.40923 Y81.69627
G01 X92.48909 Y81.74963
G01 X92.62742 Y81.82357
G01 X92.67743 Y81.84432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.42320 Y81.45928 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.42320 Y81.45928
G01 X90.42320 Y81.52753
G01 X90.40837 Y81.61166
G01 X90.38841 Y81.68616
G01 X90.35920 Y81.76642
G01 X90.32308 Y81.82898
G01 X90.23613 Y81.88034
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.19195 Y85.54932 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.19195 Y85.54932
G01 X85.25568 Y85.52031
G01 X85.33279 Y85.48836
G01 X85.53637 Y85.43281
G01 X85.61349 Y85.42265
G01 X85.70574 Y85.41658
G01 X107.66795 Y85.41658
G01 X107.70239 Y85.41574
G01 X107.73663 Y85.41404
G01 X107.77067 Y85.40901
G01 X107.83810 Y85.39557
G01 X107.87156 Y85.38719
G01 X107.87229 Y85.38694
G01 X107.90376 Y85.37566
G01 X107.96737 Y85.34934
G01 X107.99840 Y85.33464
G01 X108.02787 Y85.31701
G01 X108.08514 Y85.27873
G01 X108.11268 Y85.25829
G01 X108.13818 Y85.23520
G01 X108.16307 Y85.21147
G01 X113.01447 Y80.36007
G01 X113.03820 Y80.33518
G01 X113.06126 Y80.30973
G01 X113.08171 Y80.28215
G01 X113.11112 Y80.23925
G01 X113.11998 Y80.22487
G01 X113.13764 Y80.19543
G01 X113.15232 Y80.16437
G01 X113.17866 Y80.10076
G01 X113.19021 Y80.06846
G01 X113.19857 Y80.03511
G01 X113.21198 Y79.96764
G01 X113.21704 Y79.93358
G01 X113.21874 Y79.89934
G01 X113.21958 Y79.86490
G01 X113.21958 Y70.85956
G01 X113.21874 Y70.82512
G01 X113.21704 Y70.79088
G01 X113.21201 Y70.75684
G01 X113.19857 Y70.68940
G01 X113.19021 Y70.65608
G01 X113.17866 Y70.62374
G01 X113.15232 Y70.56014
G01 X113.13764 Y70.52908
G01 X113.12001 Y70.49964
G01 X113.08173 Y70.44236
G01 X113.06128 Y70.41480
G01 X113.03820 Y70.38933
G01 X113.01447 Y70.36444
G01 X109.76160 Y67.11159
G01 X109.41456 Y66.96785
G01 X109.39469 Y66.96018
G01 X109.32609 Y66.93561
G01 X109.29289 Y66.92553
G01 X109.22428 Y66.90833
G01 X109.19604 Y66.90270
G01 X109.12743 Y66.89254
G01 X109.10198 Y66.89002
G01 X109.03338 Y66.88664
G01 X109.02108 Y66.88634
G01 X98.86091 Y66.88634
G01 X98.84864 Y66.88664
G01 X98.78001 Y66.89002
G01 X98.75453 Y66.89254
G01 X98.68593 Y66.90270
G01 X98.65768 Y66.90833
G01 X98.58908 Y66.92553
G01 X98.55588 Y66.93561
G01 X98.48727 Y66.96018
G01 X98.46741 Y66.96785
G01 X98.12037 Y67.11159
G01 X96.40577 Y68.82619
G01 X96.38207 Y68.85108
G01 X96.35890 Y68.87663
G01 X96.35799 Y68.87785
G01 X96.33792 Y68.90363
G01 X96.33533 Y68.90678
G01 X96.31611 Y68.93144
G01 X96.29563 Y68.95893
G01 X96.25118 Y69.01298
G01 X96.22985 Y69.03658
G01 X96.19911 Y69.07262
G01 X96.17699 Y69.10010
G01 X96.15187 Y69.12997
G01 X96.08471 Y69.20642
G01 X96.06810 Y69.22403
G01 X96.05596 Y69.22710
G01 X95.97077 Y69.23337
G01 X95.89365 Y69.23231
G01 X95.80866 Y69.22370
G01 X95.72647 Y69.20043
G01 X95.64956 Y69.16327
G01 X95.60851 Y69.13878
G01 X95.59284 Y69.10775
G01 X95.54933 Y69.00937
G01 X95.51936 Y68.93020
G01 X95.50450 Y68.88722
G01 X95.48090 Y68.81206
G01 X95.47095 Y68.77739
G01 X95.45644 Y68.72164
G01 X95.45342 Y68.71039
G01 X95.42124 Y68.59469
G01 X95.40846 Y68.56012
G01 X95.38146 Y68.49680
G01 X95.34458 Y68.42085
G01 X95.30762 Y68.35845
G01 X95.26968 Y68.30102
G01 X95.24082 Y68.26167
G01 X95.16985 Y68.18004
G01 X95.12210 Y68.13030
G01 X95.11263 Y68.12136
G01 X95.00028 Y68.03155
G01 X94.96310 Y68.00379
G01 X94.94329 Y67.99271
G01 X94.80519 Y67.91844
G01 X94.79564 Y67.91341
G01 X94.74098 Y67.89319
G01 X94.61545 Y67.85263
G01 X94.59112 Y67.84694
G01 X94.52342 Y67.83457
G01 X94.42795 Y67.82190
G01 X94.36739 Y67.81892
G01 X94.29848 Y67.81892
G01 X94.23790 Y67.82190
G01 X94.14242 Y67.83455
G01 X94.09107 Y67.84331
G01 X94.07473 Y67.84694
G01 X94.05921 Y67.85057
G01 X93.93458 Y67.92527
G01 X93.88279 Y67.95984
G01 X93.75546 Y68.05426
G01 X93.71289 Y68.08918
G01 X93.59653 Y68.19464
G01 X93.55924 Y68.23193
G01 X93.45378 Y68.34829
G01 X93.41888 Y68.39086
G01 X93.36610 Y68.46203
G01 X93.34878 Y68.53119
G01 X93.33811 Y68.58461
G01 X93.31487 Y68.74145
G01 X93.31019 Y68.78877
G01 X93.30247 Y68.94559
G01 X93.30247 Y68.99103
G01 X93.31019 Y69.14788
G01 X93.31487 Y69.19520
G01 X93.33811 Y69.35204
G01 X93.34878 Y69.40546
G01 X93.38804 Y69.56225
G01 X93.40753 Y69.62634
G01 X93.42485 Y69.67472
G01 X93.42500 Y69.67495
G01 X93.49599 Y69.75661
G01 X93.50107 Y69.76235
G01 X93.52686 Y69.79139
G01 X93.54225 Y69.80815
G01 X93.54928 Y69.81559
G01 X93.60935 Y69.88773
G01 X93.61644 Y69.93144
G01 X93.62660 Y70.00856
G01 X93.63267 Y70.10081
G01 X93.63267 Y71.62682
G01 X93.63188 Y71.66017
G01 X93.63054 Y71.68849
G01 X93.61273 Y71.81673
G01 X93.59498 Y71.89390
G01 X93.52691 Y72.08361
G01 X93.52691 Y72.14106
G01 X93.49246 Y72.21394
G01 X93.45952 Y72.29324
G01 X93.39988 Y72.45989
G01 X93.38083 Y72.52252
G01 X93.33910 Y72.68915
G01 X93.32884 Y72.74066
G01 X93.30410 Y72.90731
G01 X93.29963 Y72.95259
G01 X93.29145 Y73.11919
G01 X93.29091 Y73.14081
G01 X93.29091 Y73.32994
G01 X93.29328 Y73.37766
G01 X93.29638 Y73.40926
G01 X93.29892 Y73.46113
G01 X93.29892 Y73.55008
G01 X93.30204 Y73.61231
G01 X93.31276 Y73.72140
G01 X93.31657 Y73.79346
G01 X93.31665 Y73.80139
G01 X93.32129 Y73.88627
G01 X93.33178 Y73.99257
G01 X93.38111 Y74.05269
G01 X93.44906 Y74.12064
G01 X93.57786 Y74.22633
G01 X93.65772 Y74.27969
G01 X93.80468 Y74.35826
G01 X93.89343 Y74.39501
G01 X93.94547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.33178 Y73.99257 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.33178 Y73.99257
G01 X93.29241 Y74.06626
G01 X93.23905 Y74.14614
G01 X93.08357 Y74.33555
G01 X93.01566 Y74.40347
G01 X92.97585 Y74.43616
G01 X92.82625 Y74.55894
G01 X92.74636 Y74.61231
G01 X92.67270 Y74.65168
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.55092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.55092 Y76.09620
G01 X90.56674 Y76.14832
G01 X90.60349 Y76.23707
G01 X90.68206 Y76.38403
G01 X90.73542 Y76.46389
G01 X90.84111 Y76.59269
G01 X90.90906 Y76.66064
G01 X90.98094 Y76.71962
G01 X90.98094 Y77.25132
G01 X90.98330 Y77.29935
G01 X90.99001 Y77.36765
G01 X91.00875 Y77.46186
G01 X91.02866 Y77.52752
G01 X91.06544 Y77.61626
G01 X91.09778 Y77.67677
G01 X91.15114 Y77.75665
G01 X91.19468 Y77.80968
G01 X91.22696 Y77.84530
G01 X92.21497 Y78.83328
G01 X92.25061 Y78.86561
G01 X92.30364 Y78.90910
G01 X92.38350 Y78.96246
G01 X92.44403 Y78.99482
G01 X92.53275 Y79.03160
G01 X92.59841 Y79.05149
G01 X92.69262 Y79.07026
G01 X92.76092 Y79.07697
G01 X92.80895 Y79.07930
G01 X93.60400 Y79.07930
G01 X94.22614 Y79.70148
G01 X94.21840 Y79.70785
G01 X94.15048 Y79.77580
G01 X94.12972 Y79.80102
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.72223 Y78.82530 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.72223 Y78.82530
G01 X95.76472 Y78.87707
G01 X95.81809 Y78.95690
G01 X95.85045 Y79.01743
G01 X95.88720 Y79.10618
G01 X95.90711 Y79.17181
G01 X95.92586 Y79.26602
G01 X95.93257 Y79.33432
G01 X95.93493 Y79.38233
G01 X95.93493 Y79.67785
G01 X95.97148 Y79.70785
G01 X96.01994 Y79.75632
G01 X96.01994 Y80.24681
G01 X96.01992 Y80.28979
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X94.60783 Y81.84432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X94.60783 Y81.84432
G01 X94.55782 Y81.82357
G01 X94.41949 Y81.74963
G01 X94.33963 Y81.69627
G01 X94.21840 Y81.59677
G01 X94.15048 Y81.52885
G01 X94.12972 Y81.50356
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.65152 Y81.84435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.65152 Y81.84435
G01 X93.70166 Y81.82357
G01 X93.83999 Y81.74963
G01 X93.91984 Y81.69627
G01 X94.04108 Y81.59677
G01 X94.10900 Y81.52885
G01 X94.12972 Y81.50356
G01 X94.12972 Y79.80102
G01 X94.10900 Y79.77580
G01 X94.04108 Y79.70785
G01 X93.91984 Y79.60836
G01 X93.83999 Y79.55502
G01 X93.70166 Y79.48106
G01 X93.61294 Y79.44430
G01 X93.46285 Y79.39878
G01 X93.36864 Y79.38006
G01 X93.21256 Y79.36467
G01 X93.11652 Y79.36467
G01 X92.96044 Y79.38006
G01 X92.86623 Y79.39878
G01 X92.71614 Y79.44430
G01 X92.62742 Y79.48106
G01 X92.56458 Y79.51466
G01 X92.48909 Y79.55502
G01 X92.40923 Y79.60836
G01 X92.28800 Y79.70785
G01 X92.22008 Y79.77580
G01 X92.19008 Y79.81232
G01 X90.99788 Y79.81232
G01 X90.12092 Y78.93541
G01 X90.12092 Y76.71964
G01 X90.19283 Y76.66064
G01 X90.26075 Y76.59269
G01 X90.36646 Y76.46389
G01 X90.41983 Y76.38403
G01 X90.49839 Y76.23707
G01 X90.53514 Y76.14832
G01 X90.55092 Y76.09620
G01 X90.55092 Y75.26534
G01 X90.53514 Y75.21330
G01 X90.49839 Y75.12455
G01 X90.41983 Y74.97758
G01 X90.36646 Y74.89773
G01 X90.30593 Y74.82397
G01 X90.26075 Y74.76892
G01 X90.19283 Y74.70100
G01 X90.06402 Y74.59529
G01 X89.98417 Y74.54192
G01 X89.83720 Y74.46336
G01 X89.74845 Y74.42661
G01 X89.69633 Y74.41083
G01 X88.86547 Y74.41083
G01 X88.81343 Y74.39501
G01 X88.72468 Y74.35826
G01 X88.57772 Y74.27969
G01 X88.49786 Y74.22633
G01 X88.36906 Y74.12064
G01 X88.30111 Y74.05269
G01 X88.19542 Y73.92389
G01 X88.14206 Y73.84403
G01 X88.06349 Y73.69707
G01 X88.02674 Y73.60832
G01 X88.01092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.55092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.55092 Y75.26534
G01 X90.56674 Y75.21330
G01 X90.60349 Y75.12455
G01 X90.68206 Y74.97758
G01 X90.73542 Y74.89773
G01 X90.84111 Y74.76892
G01 X90.90906 Y74.70100
G01 X90.96913 Y74.65168
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.31007 Y73.99260 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.31007 Y73.99260
G01 X90.26075 Y74.05269
G01 X90.19283 Y74.12064
G01 X90.06402 Y74.22633
G01 X89.98417 Y74.27969
G01 X89.83720 Y74.35826
G01 X89.74845 Y74.39501
G01 X89.69633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.86547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.86547 Y74.41083
G01 X88.81343 Y74.42661
G01 X88.72468 Y74.46336
G01 X88.57772 Y74.54192
G01 X88.49786 Y74.59529
G01 X88.36906 Y74.70100
G01 X88.30111 Y74.76892
G01 X88.25176 Y74.82902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.59268 Y74.16999 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.59268 Y74.16999
G01 X87.65283 Y74.12064
G01 X87.72075 Y74.05269
G01 X87.82646 Y73.92389
G01 X87.87983 Y73.84403
G01 X87.95839 Y73.69707
G01 X87.99514 Y73.60832
G01 X88.01092 Y73.55620
G01 X88.01092 Y72.72534
G01 X87.99514 Y72.67330
G01 X87.95839 Y72.58455
G01 X87.87983 Y72.43758
G01 X87.82646 Y72.35773
G01 X87.76593 Y72.28397
G01 X87.72075 Y72.22892
G01 X87.65283 Y72.16100
G01 X87.55587 Y72.08143
G01 X87.55326 Y69.94249
G01 X87.58948 Y69.91277
G01 X87.65740 Y69.84485
G01 X87.75689 Y69.72362
G01 X87.81026 Y69.64376
G01 X87.88419 Y69.50543
G01 X87.92095 Y69.41671
G01 X87.96647 Y69.26662
G01 X87.98292 Y69.18374
G01 X87.98292 Y68.75273
G01 X87.96647 Y68.67000
G01 X87.92842 Y68.54465
G01 X87.91856 Y68.53701
G01 X87.90357 Y68.52522
G01 X87.82539 Y68.46264
G01 X87.73360 Y68.37762
G01 X87.70647 Y68.34839
G01 X87.67878 Y68.32009
G01 X87.65478 Y68.29680
G01 X87.61315 Y68.25286
G01 X87.54985 Y68.18004
G01 X87.50210 Y68.13030
G01 X87.49265 Y68.12136
G01 X87.38028 Y68.03155
G01 X87.34310 Y68.00379
G01 X87.32329 Y67.99271
G01 X87.18519 Y67.91844
G01 X87.17564 Y67.91341
G01 X87.12098 Y67.89319
G01 X86.99545 Y67.85263
G01 X86.98956 Y67.85126
G01 X86.97112 Y67.84694
G01 X86.90342 Y67.83457
G01 X86.80795 Y67.82190
G01 X86.74739 Y67.81892
G01 X86.67848 Y67.81892
G01 X86.61790 Y67.82190
G01 X86.52242 Y67.83455
G01 X86.47107 Y67.84331
G01 X86.45473 Y67.84694
G01 X86.43043 Y67.85263
G01 X86.30487 Y67.89319
G01 X86.25021 Y67.91341
G01 X86.24066 Y67.91844
G01 X86.10256 Y67.99271
G01 X86.08275 Y68.00379
G01 X86.04556 Y68.03155
G01 X85.93322 Y68.12134
G01 X85.92375 Y68.13030
G01 X85.87599 Y68.18004
G01 X85.81270 Y68.25286
G01 X85.80297 Y68.26381
G01 X85.79471 Y68.27292
G01 X85.77160 Y68.29726
G01 X85.72024 Y68.34884
G01 X85.71669 Y68.35238
G01 X85.65936 Y68.40922
G01 X85.60030 Y68.46254
G01 X85.52375 Y68.52568
G01 X85.49786 Y68.54544
G01 X85.45532 Y68.54740
G01 X85.38842 Y68.54465
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.49786 Y68.54544 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.49786 Y68.54544
G01 X85.49698 Y68.54613
G01 X85.45941 Y68.67000
G01 X85.44292 Y68.75273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.44292 Y69.18374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.44292 Y69.18374
G01 X85.45941 Y69.26662
G01 X85.50493 Y69.41671
G01 X85.54168 Y69.50543
G01 X85.61562 Y69.64376
G01 X85.66898 Y69.72362
G01 X85.76848 Y69.84485
G01 X85.83640 Y69.91277
G01 X85.87295 Y69.94277
G01 X85.87295 Y72.12499
G01 X85.82906 Y72.16100
G01 X85.76111 Y72.22892
G01 X85.65542 Y72.35773
G01 X85.60206 Y72.43758
G01 X85.52349 Y72.58455
G01 X85.48674 Y72.67330
G01 X85.47092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.93092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.93092 Y72.72534
G01 X82.94674 Y72.67330
G01 X82.98349 Y72.58455
G01 X83.06206 Y72.43758
G01 X83.11542 Y72.35773
G01 X83.22111 Y72.22892
G01 X83.28906 Y72.16100
G01 X83.33295 Y72.12499
G01 X83.33295 Y69.94277
G01 X83.29640 Y69.91277
G01 X83.22848 Y69.84485
G01 X83.12898 Y69.72362
G01 X83.07562 Y69.64376
G01 X83.00168 Y69.50543
G01 X82.98266 Y69.45946
G01 X82.96493 Y69.41671
G01 X82.91941 Y69.26662
G01 X82.90066 Y69.17241
G01 X82.88530 Y69.01633
G01 X82.88530 Y68.92029
G01 X82.90066 Y68.76421
G01 X82.91941 Y68.67000
G01 X82.92601 Y68.64818
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.37501 Y67.71707 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.37501 Y67.71707
G01 X84.43620 Y67.70782
G01 X84.47125 Y67.71478
G01 X84.48001 Y67.71743
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.51527 Y67.59934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.51527 Y67.59934
G01 X84.47447 Y67.68690
G01 X84.47445 Y67.68690
G01 X84.46739 Y67.69162
G01 X84.43747 Y67.70762
G01 X84.37501 Y67.71707
G01 X84.31008 Y67.73000
G01 X84.22230 Y67.74305
G01 X84.21481 Y67.74379
G01 X84.13228 Y67.75601
G01 X84.06632 Y67.76914
G01 X83.98756 Y67.78082
G01 X83.97722 Y67.78184
G01 X83.89853 Y67.79352
G01 X83.83254 Y67.80666
G01 X83.75014 Y67.81885
G01 X83.74255 Y67.81959
G01 X83.67925 Y67.82812
G01 X83.65987 Y67.84211
G01 X83.53254 Y67.93653
G01 X83.46983 Y67.98799
G01 X83.35347 Y68.09342
G01 X83.29802 Y68.14887
G01 X83.19259 Y68.26523
G01 X83.14113 Y68.32794
G01 X83.04671 Y68.45527
G01 X82.99703 Y68.52969
G01 X82.92601 Y68.64818
G01 X82.50092 Y69.07328
G01 X82.50092 Y72.10200
G01 X82.57283 Y72.16100
G01 X82.64075 Y72.22892
G01 X82.68593 Y72.28397
G01 X82.74646 Y72.35773
G01 X82.79983 Y72.43758
G01 X82.87839 Y72.58455
G01 X82.91514 Y72.67330
G01 X82.93092 Y72.72534
G01 X82.93092 Y73.55620
G01 X82.91514 Y73.60832
G01 X82.87839 Y73.69707
G01 X82.79983 Y73.84403
G01 X82.74646 Y73.92389
G01 X82.64075 Y74.05269
G01 X82.57283 Y74.12064
G01 X82.44402 Y74.22633
G01 X82.36417 Y74.27969
G01 X82.21720 Y74.35826
G01 X82.12845 Y74.39501
G01 X82.07633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.24547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.24547 Y74.41083
G01 X81.19343 Y74.42661
G01 X81.10468 Y74.46336
G01 X80.95772 Y74.54192
G01 X80.87786 Y74.59529
G01 X80.80410 Y74.65582
G01 X80.74906 Y74.70100
G01 X80.68111 Y74.76892
G01 X80.57542 Y74.89773
G01 X80.52206 Y74.97758
G01 X80.44349 Y75.12455
G01 X80.40674 Y75.21330
G01 X80.39092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.53633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.53633 Y74.41083
G01 X79.58845 Y74.39501
G01 X79.67720 Y74.35826
G01 X79.82417 Y74.27969
G01 X79.90402 Y74.22633
G01 X80.03283 Y74.12064
G01 X80.10075 Y74.05269
G01 X80.20646 Y73.92389
G01 X80.25983 Y73.84403
G01 X80.33839 Y73.69707
G01 X80.37514 Y73.60832
G01 X80.39092 Y73.55620
G01 X80.39092 Y72.72534
G01 X80.37514 Y72.67330
G01 X80.33839 Y72.58455
G01 X80.25983 Y72.43758
G01 X80.20646 Y72.35773
G01 X80.14593 Y72.28397
G01 X80.10075 Y72.22892
G01 X80.03283 Y72.16100
G01 X79.96092 Y72.10200
G01 X79.96092 Y67.28182
G01 X79.95856 Y67.23381
G01 X79.95185 Y67.16551
G01 X79.93311 Y67.07130
G01 X79.91319 Y67.00564
G01 X79.89996 Y66.97374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.16595 Y66.87300 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.16595 Y66.87300
G01 X80.16595 Y67.54433
G01 X80.17535 Y67.63991
G01 X80.20323 Y67.73183
G01 X80.24852 Y67.81654
G01 X80.30946 Y67.89081
G01 X80.38370 Y67.95174
G01 X80.41647 Y67.96924
G01 X80.46841 Y67.99700
G01 X80.56033 Y68.02489
G01 X80.65594 Y68.03432
G01 X81.16402 Y68.03432
G01 X81.06696 Y68.13137
G01 X81.03465 Y68.16701
G01 X80.99114 Y68.22004
G01 X80.93778 Y68.29990
G01 X80.90542 Y68.36040
G01 X80.86866 Y68.44915
G01 X80.84875 Y68.51481
G01 X80.83001 Y68.60902
G01 X80.82330 Y68.67732
G01 X80.82094 Y68.72532
G01 X80.82094 Y72.10200
G01 X80.74906 Y72.16100
G01 X80.68111 Y72.22892
G01 X80.57542 Y72.35773
G01 X80.52206 Y72.43758
G01 X80.44349 Y72.58455
G01 X80.40674 Y72.67330
G01 X80.39092 Y72.72534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.85092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.85092 Y75.26534
G01 X77.86674 Y75.21330
G01 X77.90349 Y75.12455
G01 X77.98206 Y74.97758
G01 X78.03542 Y74.89773
G01 X78.14111 Y74.76892
G01 X78.20906 Y74.70100
G01 X78.26410 Y74.65582
G01 X78.33786 Y74.59529
G01 X78.41772 Y74.54192
G01 X78.56468 Y74.46336
G01 X78.65343 Y74.42661
G01 X78.70547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.39092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.39092 Y73.55620
G01 X80.40674 Y73.60832
G01 X80.44349 Y73.69707
G01 X80.52206 Y73.84403
G01 X80.57542 Y73.92389
G01 X80.68111 Y74.05269
G01 X80.74906 Y74.12064
G01 X80.87786 Y74.22633
G01 X80.95772 Y74.27969
G01 X81.10468 Y74.35826
G01 X81.19343 Y74.39501
G01 X81.24547 Y74.41083
G01 X82.07633 Y74.41083
G01 X82.12845 Y74.42661
G01 X82.21720 Y74.46336
G01 X82.36417 Y74.54192
G01 X82.44402 Y74.59529
G01 X82.57283 Y74.70100
G01 X82.64075 Y74.76892
G01 X82.68593 Y74.82397
G01 X82.74646 Y74.89773
G01 X82.79983 Y74.97758
G01 X82.87839 Y75.12455
G01 X82.91514 Y75.21330
G01 X82.93092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.78547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.78547 Y74.41083
G01 X83.73343 Y74.39501
G01 X83.64468 Y74.35826
G01 X83.49772 Y74.27969
G01 X83.41786 Y74.22633
G01 X83.28906 Y74.12064
G01 X83.22111 Y74.05269
G01 X83.11542 Y73.92389
G01 X83.06206 Y73.84403
G01 X82.98349 Y73.69707
G01 X82.94674 Y73.60832
G01 X82.93092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.61633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.61633 Y74.41083
G01 X84.66845 Y74.42661
G01 X84.75720 Y74.46336
G01 X84.90417 Y74.54192
G01 X84.98402 Y74.59529
G01 X85.11283 Y74.70100
G01 X85.18075 Y74.76892
G01 X85.23007 Y74.82902
G01 X85.24056 Y74.93539
G01 X85.24521 Y75.02031
G01 X85.24529 Y75.02818
G01 X85.24907 Y75.10029
G01 X85.25982 Y75.20933
G01 X85.26294 Y75.27161
G01 X85.26294 Y75.36054
G01 X85.26545 Y75.41241
G01 X85.26855 Y75.44406
G01 X85.27092 Y75.49173
G01 X85.27092 Y75.68081
G01 X85.27038 Y75.70242
G01 X85.26220 Y75.86907
G01 X85.25773 Y75.91434
G01 X85.23302 Y76.08096
G01 X85.22273 Y76.13250
G01 X85.18100 Y76.29912
G01 X85.16195 Y76.36176
G01 X85.10234 Y76.52838
G01 X85.07043 Y76.60552
G01 X85.07043 Y76.87481
G01 X85.02860 Y77.01845
G01 X85.01374 Y77.09556
G01 X85.00099 Y77.21019
G01 X85.00048 Y77.22790
G01 X85.00018 Y77.24850
G01 X85.00018 Y78.50384
G01 X85.00625 Y78.59609
G01 X85.01641 Y78.67321
G01 X85.02349 Y78.71692
G01 X85.08357 Y78.78906
G01 X85.09060 Y78.79653
G01 X85.10599 Y78.81326
G01 X85.13175 Y78.84225
G01 X85.13685 Y78.84804
G01 X85.13993 Y78.85157
G01 X85.19436 Y79.00376
G01 X85.21153 Y79.06018
G01 X85.25080 Y79.21700
G01 X85.25999 Y79.26315
G01 X85.28326 Y79.41999
G01 X85.28725 Y79.46028
G01 X85.28727 Y79.46112
G01 X85.28875 Y79.48106
G01 X85.30208 Y79.61636
G01 X85.30406 Y79.65644
G01 X85.30406 Y79.72581
G01 X85.30615 Y79.76838
G01 X85.31072 Y79.81471
G01 X85.31300 Y79.86167
G01 X85.31300 Y80.02558
G01 X85.31333 Y80.08530
G01 X85.31333 Y80.18016
G01 X85.31158 Y80.18382
G01 X85.27462 Y80.24620
G01 X85.23668 Y80.30363
G01 X85.20782 Y80.34298
G01 X85.13685 Y80.42461
G01 X85.08910 Y80.47435
G01 X85.07963 Y80.48331
G01 X84.96474 Y80.57513
G01 X84.93007 Y80.60089
G01 X84.91029 Y80.61194
G01 X84.77219 Y80.68621
G01 X84.76266 Y80.69124
G01 X84.70798 Y80.71146
G01 X84.66386 Y80.72571
G01 X84.57717 Y80.76017
G01 X84.56116 Y80.76777
G01 X84.50533 Y80.79154
G01 X84.49302 Y80.79622
G01 X84.34283 Y80.87122
G01 X84.29886 Y80.89860
G01 X84.25586 Y80.92395
G01 X84.25192 Y80.92395
G01 X84.09584 Y80.90859
G01 X84.01001 Y80.89152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.29886 Y80.89860 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.29886 Y80.89860
G01 X84.25583 Y80.92395
G01 X84.25550 Y80.92416
G01 X84.24006 Y80.95573
G01 X84.20937 Y81.03546
G01 X84.20249 Y81.07059
G01 X84.20879 Y81.09022
G01 X84.24443 Y81.20104
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.35736 Y82.61468 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.35736 Y82.61468
G01 X83.60295 Y82.86032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.18512 Y82.89634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.18512 Y82.89634
G01 X83.25019 Y82.86032
G01 X83.60295 Y82.86032
G01 X84.19408 Y83.10515
G01 X84.21765 Y83.11427
G01 X84.28626 Y83.13883
G01 X84.32654 Y83.15108
G01 X84.39515 Y83.16825
G01 X84.43015 Y83.17523
G01 X84.49876 Y83.18542
G01 X84.53076 Y83.18857
G01 X84.59939 Y83.19194
G01 X84.61491 Y83.19233
G01 X106.71055 Y83.19233
G01 X106.72607 Y83.19194
G01 X106.79467 Y83.18857
G01 X106.82668 Y83.18542
G01 X106.89528 Y83.17523
G01 X106.93028 Y83.16825
G01 X106.99889 Y83.15108
G01 X107.00521 Y83.14942
G01 X107.03054 Y83.12832
G01 X107.08144 Y83.08219
G01 X107.09523 Y83.06906
G01 X110.87203 Y79.29228
G01 X110.88519 Y79.27846
G01 X110.93132 Y79.22756
G01 X110.95242 Y79.20224
G01 X110.95408 Y79.19591
G01 X110.97125 Y79.12731
G01 X110.97823 Y79.09231
G01 X110.98842 Y79.02370
G01 X110.99157 Y78.99170
G01 X110.99494 Y78.92307
G01 X110.99532 Y78.90752
G01 X110.99532 Y72.31711
G01 X110.99494 Y72.30159
G01 X110.99157 Y72.23299
G01 X110.98842 Y72.20098
G01 X110.97823 Y72.13238
G01 X110.97125 Y72.09738
G01 X110.95408 Y72.02877
G01 X110.94183 Y71.98849
G01 X110.91727 Y71.91988
G01 X110.90815 Y71.89631
G01 X110.76835 Y71.55877
G01 X109.65634 Y70.44676
G01 X109.62019 Y70.34577
G01 X109.59383 Y70.28191
G01 X109.52261 Y70.13132
G01 X109.49858 Y70.08631
G01 X109.41547 Y69.94765
G01 X109.39345 Y69.91463
G01 X109.29899 Y69.78730
G01 X109.27780 Y69.76147
G01 X109.17237 Y69.64513
G01 X109.15012 Y69.62288
G01 X109.03378 Y69.51745
G01 X109.00795 Y69.49626
G01 X108.88062 Y69.40180
G01 X108.84760 Y69.37978
G01 X108.70894 Y69.29667
G01 X108.66393 Y69.27264
G01 X108.51334 Y69.20142
G01 X108.44948 Y69.17506
G01 X108.33765 Y69.13505
G01 X108.28822 Y69.13746
G01 X108.21057 Y69.14513
G01 X108.05375 Y69.16840
G01 X107.96907 Y69.18527
G01 X107.81225 Y69.22456
G01 X107.77742 Y69.23515
G01 X107.72744 Y69.26855
G01 X107.60620 Y69.36805
G01 X107.53828 Y69.43596
G01 X107.43879 Y69.55720
G01 X107.38543 Y69.63708
G01 X107.37039 Y69.66520
G01 X107.31149 Y69.77538
G01 X107.27473 Y69.86413
G01 X107.22922 Y70.01420
G01 X107.21047 Y70.10840
G01 X107.19510 Y70.26449
G01 X107.19510 Y70.36055
G01 X107.21047 Y70.51661
G01 X107.22922 Y70.61082
G01 X107.27473 Y70.76090
G01 X107.31149 Y70.84965
G01 X107.38543 Y70.98796
G01 X107.43879 Y71.06781
G01 X107.53828 Y71.18905
G01 X107.60620 Y71.25697
G01 X107.72744 Y71.35646
G01 X107.80729 Y71.40982
G01 X107.94560 Y71.48376
G01 X108.03434 Y71.52052
G01 X108.18443 Y71.56603
G01 X108.27864 Y71.58478
G01 X108.43470 Y71.60015
G01 X108.53076 Y71.60015
G01 X108.57778 Y71.59552
G01 X108.97399 Y71.99176
G01 X109.09495 Y72.08145
G01 X109.16553 Y72.13936
G01 X109.28187 Y72.24482
G01 X109.34443 Y72.30738
G01 X109.44989 Y72.42372
G01 X109.50780 Y72.49430
G01 X109.59736 Y72.61510
G01 X109.60119 Y72.62219
G01 X109.63795 Y72.71091
G01 X109.64732 Y72.74180
G01 X109.66579 Y72.86641
G01 X109.67483 Y72.95785
G01 X109.68253 Y73.11467
G01 X109.68253 Y73.20395
G01 X109.67483 Y73.36080
G01 X109.66579 Y73.45224
G01 X109.64732 Y73.57680
G01 X109.64730 Y74.51254
G01 X109.72273 Y74.72333
G01 X109.74674 Y74.80225
G01 X109.80810 Y75.04731
G01 X109.82073 Y75.11060
G01 X109.85707 Y75.35564
G01 X109.86243 Y75.41002
G01 X109.87450 Y75.65505
G01 X109.87450 Y75.70659
G01 X109.86243 Y75.95165
G01 X109.85707 Y76.00603
G01 X109.82073 Y76.25106
G01 X109.80810 Y76.31436
G01 X109.74674 Y76.55942
G01 X109.72273 Y76.63834
G01 X109.64732 Y76.84908
G01 X109.64735 Y77.05028
G01 X109.68334 Y77.12015
G01 X109.71529 Y77.19726
G01 X109.77084 Y77.40085
G01 X109.78100 Y77.47796
G01 X109.78707 Y77.57019
G01 X109.78707 Y78.41067
G01 X109.78557 Y78.45662
G01 X109.78301 Y78.49554
G01 X109.76645 Y78.60895
G01 X109.74915 Y78.63247
G01 X109.70180 Y78.69416
G01 X109.64084 Y78.76371
G01 X106.56671 Y81.83785
G01 X106.53313 Y81.86929
G01 X106.50382 Y81.89497
G01 X106.41195 Y81.96347
G01 X106.38304 Y81.96784
G01 X106.30593 Y81.97800
G01 X106.21367 Y81.98407
G01 X98.37137 Y81.98407
G01 X98.36159 Y81.98400
G01 X98.35339 Y81.98389
G01 X98.25120 Y81.97500
G01 X98.17409 Y81.96269
G01 X97.96604 Y81.89959
G01 X97.88892 Y81.86515
G01 X97.85136 Y81.84432
G01 X97.84460 Y81.84056
G01 X97.82217 Y81.81064
G01 X97.78359 Y81.73442
G01 X97.75885 Y81.65263
G01 X97.75804 Y81.64884
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.85136 Y81.84432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.85136 Y81.84432
G01 X97.43193 Y81.84432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.01992 Y81.01486 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.01992 Y81.01486
G01 X96.01994 Y81.05784
G01 X96.01994 Y81.54831
G01 X95.97148 Y81.59677
G01 X95.85024 Y81.69627
G01 X95.77039 Y81.74963
G01 X95.63206 Y81.82357
G01 X95.58192 Y81.84435
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.45784 Y81.84432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.45784 Y81.84432
G01 X96.40780 Y81.82357
G01 X96.26950 Y81.74963
G01 X96.18964 Y81.69627
G01 X96.06840 Y81.59677
G01 X96.01994 Y81.54831
G01 X96.01992 Y81.01486
G01 X96.01992 Y80.28979
G01 X96.01994 Y79.75632
G01 X96.06840 Y79.70785
G01 X96.10493 Y79.67788
G01 X96.10493 Y79.16726
G01 X95.76300 Y78.82530
G01 X95.72223 Y78.82530
G01 X95.72050 Y78.82449
G01 X95.67359 Y78.80371
G01 X95.22192 Y78.61659
G01 X95.19538 Y78.60483
G01 X95.12949 Y78.57367
G01 X95.08629 Y78.55063
G01 X95.02563 Y78.51425
G01 X94.99061 Y78.49089
G01 X94.93490 Y78.44956
G01 X94.90524 Y78.42525
G01 X94.85434 Y78.37910
G01 X94.84092 Y78.36633
G01 X94.33292 Y77.85833
G01 X94.31949 Y77.84557
G01 X94.26859 Y77.79942
G01 X94.23894 Y77.77509
G01 X94.18324 Y77.73381
G01 X94.14822 Y77.71040
G01 X94.08754 Y77.67405
G01 X94.04438 Y77.65101
G01 X93.97849 Y77.61984
G01 X93.95195 Y77.60808
G01 X93.89907 Y77.58619
G01 X93.86871 Y77.57270
G01 X93.80008 Y77.54027
G01 X93.72790 Y77.50156
G01 X93.65929 Y77.46043
G01 X93.56953 Y77.40024
G01 X93.56828 Y77.39932
G01 X93.15688 Y77.39932
G01 X92.66092 Y76.90339
G01 X92.66092 Y76.71964
G01 X92.73283 Y76.66064
G01 X92.80075 Y76.59269
G01 X92.90646 Y76.46389
G01 X92.95983 Y76.38403
G01 X93.03839 Y76.23707
G01 X93.07514 Y76.14832
G01 X93.09092 Y76.09620
G01 X93.09092 Y75.26534
G01 X93.10674 Y75.21330
G01 X93.14349 Y75.12455
G01 X93.22206 Y74.97758
G01 X93.27542 Y74.89773
G01 X93.38111 Y74.76892
G01 X93.44906 Y74.70100
G01 X93.50410 Y74.65582
G01 X93.57786 Y74.59529
G01 X93.65772 Y74.54192
G01 X93.80468 Y74.46336
G01 X93.89343 Y74.42661
G01 X93.94547 Y74.41083
G01 X94.77633 Y74.41083
G01 X94.82845 Y74.42661
G01 X94.91720 Y74.46336
G01 X95.06417 Y74.54192
G01 X95.14402 Y74.59529
G01 X95.27283 Y74.70100
G01 X95.34075 Y74.76892
G01 X95.38593 Y74.82397
G01 X95.44646 Y74.89773
G01 X95.49983 Y74.97758
G01 X95.57839 Y75.12455
G01 X95.61514 Y75.21330
G01 X95.63092 Y75.26534
G01 X95.63092 Y76.09620
G01 X95.64674 Y76.14832
G01 X95.66094 Y76.18259
G01 X95.66094 Y76.86613
G01 X95.66327 Y76.91416
G01 X95.67770 Y77.06049
G01 X95.69454 Y77.14532
G01 X95.70343 Y77.15264
G01 X95.85047 Y77.26168
G01 X95.91898 Y77.30760
G01 X96.06599 Y77.39574
G01 X96.11057 Y77.41964
G01 X96.11095 Y77.41982
G01 X96.13117 Y77.43001
G01 X96.19667 Y77.46501
G01 X96.22733 Y77.48337
G01 X96.24793 Y77.49711
G01 X96.26142 Y77.50565
G01 X96.28753 Y77.52132
G01 X96.31148 Y77.53729
G01 X96.36721 Y77.57862
G01 X96.38700 Y77.59485
G01 X96.43790 Y77.64100
G01 X96.44679 Y77.64946
G01 X97.28077 Y78.48350
G01 X97.28926 Y78.49233
G01 X97.33538 Y78.54324
G01 X97.35164 Y78.56307
G01 X97.39294 Y78.61875
G01 X97.40894 Y78.64273
G01 X97.44529 Y78.70341
G01 X97.46159 Y78.73394
G01 X97.49276 Y78.79983
G01 X97.50140 Y78.81931
G01 X97.64519 Y79.16645
G01 X97.64519 Y79.51984
G01 X97.65123 Y79.61199
G01 X97.66137 Y79.68913
G01 X97.66848 Y79.73295
G01 X97.72857 Y79.80511
G01 X97.73561 Y79.81253
G01 X97.75103 Y79.82934
G01 X97.77711 Y79.85868
G01 X97.78184 Y79.86404
G01 X97.79083 Y79.87437
G01 X97.85278 Y79.94567
G01 X97.88166 Y79.98502
G01 X97.91958 Y80.04240
G01 X97.95659 Y80.10485
G01 X97.99345 Y80.18075
G01 X98.02047 Y80.24412
G01 X98.03325 Y80.27869
G01 X98.06543 Y80.39439
G01 X98.08062 Y80.46170
G01 X98.08082 Y80.46279
G01 X98.09487 Y80.61786
G01 X98.09715 Y80.65233
G01 X98.09487 Y80.68677
G01 X98.08082 Y80.84186
G01 X98.08062 Y80.84295
G01 X98.06543 Y80.91026
G01 X98.03325 Y81.02596
G01 X98.02047 Y81.06053
G01 X97.99345 Y81.12390
G01 X97.95659 Y81.19982
G01 X97.95057 Y81.20998
G01 X97.92189 Y81.26347
G01 X97.90800 Y81.29230
G01 X97.89030 Y81.32672
G01 X97.87125 Y81.36142
G01 X97.82103 Y81.47277
G01 X97.78994 Y81.55834
G01 X97.78649 Y81.56805
G01 X97.75804 Y81.64884
G01 X97.70025 Y81.69627
G01 X97.62037 Y81.74963
G01 X97.48207 Y81.82357
G01 X97.43193 Y81.84432
G01 X97.39093 Y81.85250
G01 X97.23411 Y81.87577
G01 X97.14514 Y81.88456
G01 X96.98832 Y81.89225
G01 X96.90152 Y81.89225
G01 X96.74471 Y81.88456
G01 X96.65578 Y81.87577
G01 X96.49893 Y81.85250
G01 X96.45784 Y81.84432
G01 X95.58192 Y81.84435
G01 X95.54092 Y81.85250
G01 X95.38408 Y81.87577
G01 X95.29515 Y81.88456
G01 X95.13833 Y81.89225
G01 X95.05154 Y81.89225
G01 X94.89472 Y81.88456
G01 X94.80577 Y81.87577
G01 X94.64893 Y81.85250
G01 X94.60783 Y81.84432
G01 X93.65152 Y81.84435
G01 X93.61052 Y81.85250
G01 X93.45368 Y81.87577
G01 X93.36475 Y81.88456
G01 X93.20793 Y81.89225
G01 X93.12114 Y81.89225
G01 X92.96432 Y81.88456
G01 X92.87537 Y81.87577
G01 X92.71853 Y81.85250
G01 X92.67743 Y81.84432
G01 X90.29712 Y81.84432
G01 X90.23613 Y81.88034
G01 X90.15902 Y81.91229
G01 X89.95544 Y81.96784
G01 X89.87832 Y81.97800
G01 X89.78610 Y81.98407
G01 X85.11178 Y81.98407
G01 X85.06584 Y81.98257
G01 X85.02692 Y81.98001
G01 X84.91351 Y81.96345
G01 X84.89002 Y81.94615
G01 X84.82830 Y81.89880
G01 X84.75875 Y81.83785
G01 X84.47348 Y81.55258
G01 X84.42017 Y81.49281
G01 X84.37808 Y81.43988
G01 X84.27854 Y81.27600
G01 X84.24443 Y81.20104
G01 X84.20884 Y81.09027
G01 X84.01001 Y80.89152
G01 X84.00239 Y80.88743
G01 X83.86370 Y80.80432
G01 X83.79063 Y80.75555
G01 X83.66327 Y80.66111
G01 X83.60206 Y80.61092
G01 X83.60188 Y80.61052
G01 X83.52769 Y80.45370
G01 X83.50224 Y80.39241
G01 X83.44613 Y80.23559
G01 X83.43201 Y80.18913
G01 X83.39271 Y80.03231
G01 X83.38542 Y79.99571
G01 X83.36216 Y79.83884
G01 X83.35908 Y79.80780
G01 X83.35139 Y79.65096
G01 X83.35139 Y79.62167
G01 X83.35908 Y79.46488
G01 X83.36216 Y79.43381
G01 X83.38542 Y79.27697
G01 X83.39271 Y79.24036
G01 X83.43201 Y79.08352
G01 X83.44613 Y79.03709
G01 X83.50224 Y78.88024
G01 X83.52769 Y78.81895
G01 X83.57602 Y78.71679
G01 X83.57602 Y76.87202
G01 X83.57511 Y76.83526
G01 X83.57176 Y76.76666
G01 X83.56942 Y76.73389
G01 X83.55431 Y76.71390
G01 X83.54232 Y76.69854
G01 X83.51006 Y76.65396
G01 X83.50043 Y76.63953
G01 X83.46058 Y76.58573
G01 X83.41621 Y76.53166
G01 X83.40539 Y76.51883
G01 X83.37679 Y76.48581
G01 X83.36640 Y76.47349
G01 X83.33307 Y76.43290
G01 X83.31372 Y76.41045
G01 X83.25692 Y76.34779
G01 X83.21816 Y76.30054
G01 X83.11783 Y76.16524
G01 X83.07966 Y76.10806
G01 X82.99134 Y75.96074
G01 X82.95228 Y75.88751
G01 X82.93092 Y75.84235
G01 X82.93092 Y75.26534
G01 X82.94674 Y75.21330
G01 X82.98349 Y75.12455
G01 X83.06206 Y74.97758
G01 X83.11542 Y74.89773
G01 X83.22111 Y74.76892
G01 X83.28906 Y74.70100
G01 X83.34410 Y74.65582
G01 X83.41786 Y74.59529
G01 X83.49772 Y74.54192
G01 X83.64468 Y74.46336
G01 X83.73343 Y74.42661
G01 X83.78547 Y74.41083
G01 X84.61633 Y74.41083
G01 X84.66845 Y74.39501
G01 X84.75720 Y74.35826
G01 X84.90417 Y74.27969
G01 X84.98402 Y74.22633
G01 X85.11283 Y74.12064
G01 X85.18075 Y74.05269
G01 X85.28646 Y73.92389
G01 X85.33983 Y73.84403
G01 X85.41839 Y73.69707
G01 X85.45514 Y73.60832
G01 X85.47092 Y73.55620
G01 X85.47092 Y72.72534
G01 X85.45514 Y72.67330
G01 X85.41839 Y72.58455
G01 X85.33983 Y72.43758
G01 X85.28646 Y72.35773
G01 X85.22593 Y72.28397
G01 X85.18075 Y72.22892
G01 X85.11283 Y72.16100
G01 X85.01587 Y72.08143
G01 X85.01326 Y69.94249
G01 X85.04948 Y69.91277
G01 X85.11740 Y69.84485
G01 X85.21689 Y69.72362
G01 X85.27026 Y69.64376
G01 X85.34419 Y69.50543
G01 X85.38095 Y69.41671
G01 X85.42647 Y69.26662
G01 X85.44292 Y69.18374
G01 X85.44292 Y68.75273
G01 X85.42647 Y68.67000
G01 X85.38842 Y68.54465
G01 X85.37856 Y68.53701
G01 X85.36357 Y68.52522
G01 X85.28539 Y68.46264
G01 X85.19360 Y68.37762
G01 X85.16647 Y68.34839
G01 X85.13878 Y68.32009
G01 X85.11478 Y68.29680
G01 X85.07315 Y68.25286
G01 X85.00985 Y68.18004
G01 X84.96210 Y68.13030
G01 X84.95263 Y68.12134
G01 X84.84028 Y68.03152
G01 X84.79535 Y67.99845
G01 X84.78423 Y67.99093
G01 X84.73124 Y67.95139
G01 X84.67986 Y67.90930
G01 X84.65936 Y67.89190
G01 X84.59779 Y67.83782
G01 X84.52238 Y67.76371
G01 X84.48001 Y67.71743
G01 X84.47529 Y67.69477
G01 X84.47435 Y67.68715
G01 X84.47445 Y67.68690
G01 X84.51527 Y67.59934
G01 X84.58656 Y67.47348
G01 X84.59944 Y67.45469
G01 X84.62987 Y67.40653
G01 X84.63896 Y67.39091
G01 X84.68176 Y67.32561
G01 X84.68275 Y67.32423
G01 X84.72868 Y67.26165
G01 X84.76662 Y67.20419
G01 X84.80358 Y67.14181
G01 X84.84046 Y67.06584
G01 X84.86746 Y67.00252
G01 X84.88024 Y66.96795
G01 X84.91242 Y66.85228
G01 X84.92761 Y66.78502
G01 X84.92779 Y66.78387
G01 X84.94186 Y66.62883
G01 X84.94399 Y66.59787
G01 X84.94547 Y66.56612
G01 X84.94574 Y66.55944
G01 X84.94648 Y66.53925
G01 X84.95430 Y66.45611
G01 X84.98202 Y66.41748
G01 X85.02939 Y66.35576
G01 X85.09032 Y66.28621
G01 X87.31874 Y64.05779
G01 X87.35232 Y64.02635
G01 X87.38163 Y64.00067
G01 X87.47348 Y63.93219
G01 X87.50241 Y63.92780
G01 X87.57952 Y63.91766
G01 X87.67175 Y63.91157
G01 X94.11319 Y63.91157
G01 X94.13158 Y63.91134
G01 X104.60070 Y63.91134
G01 X104.71416 Y63.96501
G01 X104.76994 Y63.98817
G01 X104.92676 Y64.04428
G01 X104.96806 Y64.05685
G01 X105.12488 Y64.09612
G01 X105.15665 Y64.10247
G01 X105.31350 Y64.12574
G01 X105.33981 Y64.12833
G01 X105.49666 Y64.13603
G01 X105.52122 Y64.13603
G01 X105.67804 Y64.12833
G01 X105.70435 Y64.12574
G01 X105.86120 Y64.10247
G01 X105.89297 Y64.09612
G01 X106.04979 Y64.05685
G01 X106.09109 Y64.04428
G01 X106.24791 Y63.98817
G01 X106.30369 Y63.96501
G01 X106.46054 Y63.89081
G01 X106.53709 Y63.84977
G01 X106.58842 Y63.81901
G01 X106.58842 Y62.88411
G01 X106.54674 Y62.81457
G01 X106.51278 Y62.76369
G01 X106.41835 Y62.63636
G01 X106.38408 Y62.59458
G01 X106.27862 Y62.47822
G01 X106.24204 Y62.44164
G01 X106.12569 Y62.33618
G01 X106.08396 Y62.30194
G01 X105.95660 Y62.20751
G01 X105.90567 Y62.17350
G01 X105.76699 Y62.09039
G01 X105.70156 Y62.05546
G01 X105.55099 Y61.98427
G01 X105.46333 Y61.94804
G01 X105.40938 Y61.92874
G01 X105.30484 Y61.93905
G01 X105.21063 Y61.95777
G01 X105.06054 Y62.00332
G01 X104.97182 Y62.04007
G01 X104.83349 Y62.11398
G01 X104.75363 Y62.16737
G01 X104.63240 Y62.26684
G01 X104.56448 Y62.33479
G01 X104.53448 Y62.37134
G01 X104.25363 Y62.37134
G01 X104.24489 Y62.37705
G01 X104.18368 Y62.40824
G01 X103.93115 Y62.49260
G01 X103.86996 Y62.50230
G01 X103.75894 Y62.51109
G01 X87.17493 Y62.51109
G01 X87.14048 Y62.51192
G01 X87.10612 Y62.51363
G01 X87.07218 Y62.51866
G01 X87.00472 Y62.53209
G01 X86.97142 Y62.54042
G01 X86.93906 Y62.55201
G01 X86.87546 Y62.57835
G01 X86.84442 Y62.59303
G01 X86.81496 Y62.61068
G01 X86.75768 Y62.64896
G01 X86.73015 Y62.66938
G01 X86.70464 Y62.69249
G01 X86.67975 Y62.71619
G01 X86.17594 Y63.22000
G01 X86.15519 Y63.23991
G01 X86.14325 Y63.25091
G01 X86.02827 Y63.33722
G01 X85.97447 Y63.36994
G01 X85.85463 Y63.43016
G01 X85.83825 Y63.43687
G01 X85.56959 Y63.80964
G01 X85.53381 Y63.85531
G01 X85.51318 Y63.87954
G01 X85.47485 Y63.92109
G01 X84.08344 Y65.31250
G01 X84.06355 Y65.33163
G01 X84.05215 Y65.34217
G01 X83.93858 Y65.42787
G01 X83.93048 Y65.43285
G01 X83.87773 Y65.43856
G01 X83.82660 Y65.44230
G01 X83.76579 Y65.44456
G01 X83.75753 Y65.44491
G01 X83.69693 Y65.44789
G01 X83.60148 Y65.46056
G01 X83.53373 Y65.47293
G01 X83.50940 Y65.47864
G01 X83.38387 Y65.51918
G01 X83.32926 Y65.53938
G01 X83.31964 Y65.54446
G01 X83.26305 Y65.57489
G01 X83.18151 Y65.61875
G01 X83.15512 Y65.63369
G01 X83.15205 Y65.63569
G01 X83.13643 Y65.64616
G01 X83.12286 Y65.65548
G01 X83.00620 Y65.72094
G01 X82.98245 Y65.73160
G01 X82.94852 Y65.74781
G01 X82.90864 Y65.76800
G01 X82.81288 Y65.80999
G01 X82.71217 Y65.70011
G01 X82.66676 Y65.65444
G01 X82.58418 Y65.57796
G01 X82.57272 Y65.56760
G01 X82.50021 Y65.52376
G01 X82.41410 Y65.49729
G01 X82.39663 Y65.49526
G01 X82.35594 Y65.49406
G01 X80.65594 Y65.49406
G01 X80.61522 Y65.49526
G01 X80.59775 Y65.49729
G01 X80.51164 Y65.52376
G01 X80.43912 Y65.56760
G01 X80.37921 Y65.62754
G01 X80.34314 Y65.68565
G01 X80.33537 Y65.70003
G01 X80.30890 Y65.78619
G01 X80.30684 Y65.80366
G01 X80.30567 Y65.84430
G01 X80.30567 Y66.39167
G01 X80.30077 Y66.47460
G01 X80.29528 Y66.52083
G01 X80.23925 Y66.73127
G01 X80.21393 Y66.79246
G01 X80.16595 Y66.87300
G01 X80.14969 Y66.90031
G01 X80.07700 Y66.93734
G01 X79.97806 Y66.96386
G01 X79.91764 Y66.97343
G01 X79.90146 Y66.97463
G01 X79.89996 Y66.97374
G01 X79.83895 Y66.93696
G01 X79.77367 Y66.89406
G01 X79.70631 Y66.84575
G01 X79.69953 Y66.84082
G01 X79.64908 Y66.80397
G01 X79.62109 Y66.78166
G01 X79.60285 Y66.76668
G01 X79.59234 Y66.75771
G01 X79.53875 Y66.70935
G01 X76.78137 Y63.95198
G01 X76.75648 Y63.92825
G01 X76.73100 Y63.90517
G01 X76.70344 Y63.88472
G01 X76.64617 Y63.84644
G01 X76.61673 Y63.82881
G01 X76.58567 Y63.81413
G01 X76.52206 Y63.78779
G01 X76.48973 Y63.77624
G01 X76.45640 Y63.76788
G01 X76.38897 Y63.75444
G01 X76.35493 Y63.74941
G01 X76.32069 Y63.74771
G01 X76.28625 Y63.74687
G01 X48.56215 Y63.74687
G01 X48.52771 Y63.74771
G01 X48.49342 Y63.74941
G01 X48.45941 Y63.75444
G01 X48.39194 Y63.76788
G01 X48.35862 Y63.77624
G01 X48.32629 Y63.78779
G01 X48.26268 Y63.81413
G01 X48.23162 Y63.82881
G01 X48.20218 Y63.84644
G01 X48.14490 Y63.88472
G01 X48.11735 Y63.90517
G01 X48.09187 Y63.92825
G01 X48.06698 Y63.95198
G01 X43.60171 Y68.41725
G01 X43.57801 Y68.44214
G01 X43.55492 Y68.46762
G01 X43.53447 Y68.49517
G01 X43.49620 Y68.55248
G01 X43.47029 Y68.59568
G01 X43.46559 Y68.60396
G01 X43.46122 Y68.61156
G01 X43.45017 Y68.63155
G01 X43.42777 Y68.67358
G01 X43.39162 Y68.73432
G01 X43.35576 Y68.78875
G01 X43.34598 Y68.80391
G01 X43.31916 Y68.84646
G01 X43.30465 Y68.86878
G01 X43.27547 Y68.91237
G01 X43.25101 Y68.94079
G01 X43.15655 Y68.96286
G01 X43.05411 Y68.96492
G01 X42.99315 Y68.95974
G01 X42.89262 Y68.94046
G01 X42.88578 Y68.93757
G01 X42.86343 Y68.90510
G01 X42.77326 Y68.77404
G01 X42.77065 Y68.76830
G01 X42.74372 Y68.71460
G01 X42.68804 Y68.61295
G01 X42.65015 Y68.55151
G01 X42.59023 Y68.49162
G01 X42.51769 Y68.44775
G01 X42.43161 Y68.42129
G01 X42.41413 Y68.41925
G01 X42.37341 Y68.41809
G01 X40.77342 Y68.41809
G01 X40.73273 Y68.41925
G01 X40.71525 Y68.42129
G01 X40.62917 Y68.44775
G01 X40.55663 Y68.49162
G01 X40.49671 Y68.55151
G01 X40.46839 Y68.59606
G01 X40.45287 Y68.62408
G01 X40.42640 Y68.71019
G01 X40.42435 Y68.72766
G01 X40.42318 Y68.76830
G01 X40.42318 Y70.36832
G01 X40.42435 Y70.40899
G01 X40.42640 Y70.42646
G01 X40.45287 Y70.51259
G01 X40.49671 Y70.58514
G01 X40.55665 Y70.64506
G01 X40.59966 Y70.67249
G01 X40.67939 Y70.71938
G01 X40.72579 Y70.74455
G01 X40.77342 Y70.76835
G01 X40.90987 Y70.85831
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.94718 Y70.98521 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.94718 Y70.98521
G01 X40.91622 Y71.04518
G01 X40.86984 Y71.12730
G01 X40.80570 Y71.22435
G01 X40.77708 Y71.26149
G01 X40.76750 Y71.27416
G01 X40.73476 Y71.31859
G01 X40.69940 Y71.36271
G01 X40.66554 Y71.40167
G01 X40.63669 Y71.44102
G01 X40.59874 Y71.49842
G01 X40.56176 Y71.56085
G01 X40.52488 Y71.63680
G01 X40.49788 Y71.70015
G01 X40.48510 Y71.73472
G01 X40.45292 Y71.85039
G01 X40.44947 Y71.86332
G01 X40.43773 Y71.91770
G01 X40.43755 Y71.91876
G01 X40.42348 Y72.07388
G01 X40.42122 Y72.10832
G01 X40.42348 Y72.14279
G01 X40.43755 Y72.29788
G01 X40.43773 Y72.29895
G01 X40.45292 Y72.36626
G01 X40.48508 Y72.48188
G01 X40.48762 Y72.48874
G01 X40.49788 Y72.51650
G01 X40.52490 Y72.57990
G01 X40.56176 Y72.65580
G01 X40.59877 Y72.71825
G01 X40.63669 Y72.77563
G01 X40.66554 Y72.81498
G01 X40.73651 Y72.89661
G01 X40.78424 Y72.94635
G01 X40.79371 Y72.95531
G01 X40.87789 Y73.02257
G01 X40.90550 Y73.04584
G01 X40.95338 Y73.08831
G01 X40.95838 Y73.09270
G01 X40.99582 Y73.12534
G01 X41.07580 Y73.20571
G01 X41.13715 Y73.27644
G01 X41.17959 Y73.32849
G01 X41.18396 Y73.33418
G01 X41.18581 Y73.38953
G01 X41.18342 Y73.42275
G01 X41.13735 Y73.48089
G01 X41.07568 Y73.55084
G01 X41.00936 Y73.61805
G01 X40.96252 Y73.66021
G01 X40.95833 Y73.66397
G01 X40.90552 Y73.71081
G01 X40.87789 Y73.73408
G01 X40.79374 Y73.80134
G01 X40.78429 Y73.81025
G01 X40.73651 Y73.86004
G01 X40.66554 Y73.94170
G01 X40.63669 Y73.98102
G01 X40.59874 Y74.03842
G01 X40.56176 Y74.10085
G01 X40.52488 Y74.17680
G01 X40.49788 Y74.24015
G01 X40.48510 Y74.27469
G01 X40.45295 Y74.39039
G01 X40.44972 Y74.40238
G01 X40.43773 Y74.45770
G01 X40.43755 Y74.45879
G01 X40.42348 Y74.61388
G01 X40.42122 Y74.64832
G01 X40.42348 Y74.68279
G01 X40.43755 Y74.83788
G01 X40.43773 Y74.83895
G01 X40.45292 Y74.90626
G01 X40.48510 Y75.02196
G01 X40.49788 Y75.05653
G01 X40.52490 Y75.11990
G01 X40.56176 Y75.19580
G01 X40.59877 Y75.25825
G01 X40.62290 Y75.29615
G01 X40.63669 Y75.31566
G01 X40.66554 Y75.35495
G01 X40.73651 Y75.43661
G01 X40.78424 Y75.48635
G01 X40.79371 Y75.49531
G01 X40.87789 Y75.56257
G01 X40.90550 Y75.58584
G01 X40.95338 Y75.62831
G01 X40.95838 Y75.63270
G01 X40.99582 Y75.66534
G01 X41.07580 Y75.74571
G01 X41.13715 Y75.81644
G01 X41.17959 Y75.86849
G01 X41.18396 Y75.87418
G01 X41.18581 Y75.92953
G01 X41.18342 Y75.96275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.18396 Y75.87418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.18396 Y75.87418
G01 X41.27512 Y75.90184
G01 X41.35787 Y75.91832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.78888 Y75.91832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.78888 Y75.91832
G01 X41.87174 Y75.90184
G01 X42.02183 Y75.85632
G01 X42.11058 Y75.81957
G01 X42.24888 Y75.74563
G01 X42.32874 Y75.69226
G01 X42.35180 Y75.67334
G01 X42.44997 Y75.59277
G01 X42.51789 Y75.52485
G01 X42.61738 Y75.40362
G01 X42.67075 Y75.32376
G01 X42.74469 Y75.18543
G01 X42.78144 Y75.09671
G01 X42.82696 Y74.94662
G01 X42.84570 Y74.85241
G01 X42.86107 Y74.69633
G01 X42.86107 Y74.60029
G01 X42.84570 Y74.44421
G01 X42.82696 Y74.35000
G01 X42.78144 Y74.19994
G01 X42.74469 Y74.11119
G01 X42.67075 Y73.97286
G01 X42.61738 Y73.89300
G01 X42.51789 Y73.77177
G01 X42.44997 Y73.70385
G01 X42.32874 Y73.60436
G01 X42.24888 Y73.55099
G01 X42.11058 Y73.47708
G01 X42.02183 Y73.44030
G01 X41.87174 Y73.39478
G01 X41.78888 Y73.37832
G01 X41.35787 Y73.37832
G01 X41.27512 Y73.39478
G01 X41.18360 Y73.42255
G01 X41.18342 Y73.42275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.18396 Y73.33418 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.18396 Y73.33418
G01 X41.27512 Y73.36184
G01 X41.35787 Y73.37832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.78888 Y73.37832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.78888 Y73.37832
G01 X41.87174 Y73.36184
G01 X42.02183 Y73.31632
G01 X42.11058 Y73.27957
G01 X42.24888 Y73.20563
G01 X42.32874 Y73.15226
G01 X42.35180 Y73.13334
G01 X42.44997 Y73.05277
G01 X42.51789 Y72.98485
G01 X42.61738 Y72.86362
G01 X42.67075 Y72.78376
G01 X42.74469 Y72.64543
G01 X42.78144 Y72.55671
G01 X42.82696 Y72.40662
G01 X42.84570 Y72.31241
G01 X42.86107 Y72.15633
G01 X42.86107 Y72.06029
G01 X42.84570 Y71.90421
G01 X42.82696 Y71.81000
G01 X42.78144 Y71.65994
G01 X42.74469 Y71.57119
G01 X42.67075 Y71.43286
G01 X42.61738 Y71.35300
G01 X42.51789 Y71.23177
G01 X42.44997 Y71.16385
G01 X42.32874 Y71.06436
G01 X42.24888 Y71.01099
G01 X42.11058 Y70.93708
G01 X42.02183 Y70.90030
G01 X41.88355 Y70.85836
G01 X41.87115 Y70.85654
G01 X41.77649 Y70.84719
G01 X41.61967 Y70.83947
G01 X41.52719 Y70.83947
G01 X41.37034 Y70.84719
G01 X41.27565 Y70.85654
G01 X41.26361 Y70.85831
G01 X40.90987 Y70.85831
G01 X40.91962 Y70.86474
G01 X40.93384 Y70.91181
G01 X40.94591 Y70.97178
G01 X40.94718 Y70.98521
G01 X40.94753 Y70.98453
G01 X41.03631 Y70.93708
G01 X41.12506 Y70.90030
G01 X41.26336 Y70.85834
G01 X41.26351 Y70.85831
G01 X41.27565 Y70.85654
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.88322 Y70.85831 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.88322 Y70.85831
G01 X42.37344 Y70.85831
G01 X42.46902 Y70.84889
G01 X42.56094 Y70.82100
G01 X42.63529 Y70.78128
G01 X42.64568 Y70.77574
G01 X42.71992 Y70.71480
G01 X42.78086 Y70.64053
G01 X42.82614 Y70.55583
G01 X42.85403 Y70.46390
G01 X42.86343 Y70.36832
G01 X42.86343 Y68.90510
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.27547 Y68.91237 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.27547 Y68.91237
G01 X43.25688 Y68.93398
G01 X43.25688 Y77.51560
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.18293 Y82.43436 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.18293 Y82.43436
G01 X48.36578 Y82.25153
G01 X48.46185 Y82.22334
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X48.18293 Y82.18298 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X48.18293 Y82.18298
G01 X48.26253 Y82.22898
G01 X48.34800 Y82.25674
G01 X48.46185 Y82.22334
G01 X48.52301 Y82.19802
G01 X48.71153 Y82.08877
G01 X48.74805 Y82.05997
G01 X48.81008 Y82.00485
G01 X51.09976 Y79.71519
G01 X51.12465 Y79.69149
G01 X51.15016 Y79.66841
G01 X51.17769 Y79.64798
G01 X51.23497 Y79.60968
G01 X51.26446 Y79.59200
G01 X51.29547 Y79.57732
G01 X51.35907 Y79.55101
G01 X51.39138 Y79.53945
G01 X51.42473 Y79.53109
G01 X51.49219 Y79.51766
G01 X51.52620 Y79.51265
G01 X51.56049 Y79.51095
G01 X51.59491 Y79.51009
G01 X52.13479 Y79.51009
G01 X52.24581 Y79.50130
G01 X52.30700 Y79.49160
G01 X52.31282 Y79.49066
G01 X52.42087 Y79.40841
G01 X52.43230 Y79.39790
G01 X52.45246 Y79.37849
G01 X52.88907 Y78.94189
G01 X52.96135 Y78.85718
G01 X52.99780 Y78.80702
G01 X53.00123 Y78.80227
G01 X53.01952 Y78.66729
G01 X53.02013 Y78.65177
G01 X53.02069 Y78.62419
G01 X53.02069 Y76.86828
G01 X53.01187 Y76.75726
G01 X53.00217 Y76.69607
G01 X52.99656 Y76.66493
G01 X52.91177 Y76.56955
G01 X52.89600 Y76.55467
G01 X52.89481 Y76.55355
G01 X52.87141 Y76.53138
G01 X52.84810 Y76.50494
G01 X52.74921 Y76.38680
G01 X52.74190 Y76.37651
G01 X52.70471 Y76.31843
G01 X52.65158 Y76.22569
G01 X52.62597 Y76.17156
G01 X52.59968 Y76.10806
G01 X52.57949 Y76.05170
G01 X52.55150 Y75.94855
G01 X52.53672 Y75.88119
G01 X52.53461 Y75.86872
G01 X52.52102 Y75.71528
G01 X52.51881 Y75.68081
G01 X52.52102 Y75.64637
G01 X52.53461 Y75.49292
G01 X52.53672 Y75.48048
G01 X52.55150 Y75.41312
G01 X52.57949 Y75.30994
G01 X52.59966 Y75.25361
G01 X52.62597 Y75.19008
G01 X52.65158 Y75.13598
G01 X52.70471 Y75.04322
G01 X52.74190 Y74.98513
G01 X52.74921 Y74.97482
G01 X52.84812 Y74.85673
G01 X52.87085 Y74.83087
G01 X52.89684 Y74.80801
G01 X53.01495 Y74.70911
G01 X53.02523 Y74.70179
G01 X53.08332 Y74.66461
G01 X53.17603 Y74.61147
G01 X53.21132 Y74.59481
G01 X53.23003 Y74.58561
G01 X53.27324 Y74.56359
G01 X53.29214 Y74.55429
G01 X53.30834 Y74.54665
G01 X53.37283 Y74.51213
G01 X53.44106 Y74.47124
G01 X53.51424 Y74.43220
G01 X53.55940 Y74.41083
G01 X54.13633 Y74.41083
G01 X54.18845 Y74.42661
G01 X54.27720 Y74.46336
G01 X54.42417 Y74.54192
G01 X54.50402 Y74.59529
G01 X54.63283 Y74.70100
G01 X54.70075 Y74.76892
G01 X54.74593 Y74.82397
G01 X54.80646 Y74.89773
G01 X54.85983 Y74.97758
G01 X54.93839 Y75.12455
G01 X54.97514 Y75.21330
G01 X54.99092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.99092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.99092 Y73.55620
G01 X55.00674 Y73.60832
G01 X55.04349 Y73.69707
G01 X55.12206 Y73.84403
G01 X55.17542 Y73.92389
G01 X55.28111 Y74.05269
G01 X55.34906 Y74.12064
G01 X55.47786 Y74.22633
G01 X55.55772 Y74.27969
G01 X55.70468 Y74.35826
G01 X55.79343 Y74.39501
G01 X55.84547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X54.99092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X54.99092 Y76.09620
G01 X55.00674 Y76.14832
G01 X55.04349 Y76.23707
G01 X55.12206 Y76.38403
G01 X55.17542 Y76.46389
G01 X55.28111 Y76.59269
G01 X55.34906 Y76.66064
G01 X55.42094 Y76.71962
G01 X55.42094 Y79.51438
G01 X54.10700 Y80.82832
G01 X53.17837 Y80.82832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.01947 Y91.74031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.01947 Y91.74031
G01 X51.02064 Y91.69967
G01 X51.02270 Y91.68217
G01 X51.04917 Y91.59602
G01 X51.09298 Y91.52355
G01 X51.15295 Y91.46361
G01 X51.22544 Y91.41977
G01 X51.31157 Y91.39330
G01 X51.32907 Y91.39124
G01 X51.36974 Y91.39007
G01 X53.06974 Y91.39007
G01 X53.11038 Y91.39124
G01 X53.12788 Y91.39330
G01 X53.21401 Y91.41977
G01 X53.28650 Y91.46361
G01 X53.34644 Y91.52355
G01 X53.39028 Y91.59604
G01 X53.41675 Y91.68217
G01 X53.41881 Y91.69967
G01 X53.41998 Y91.74031
G01 X53.41998 Y93.44031
G01 X53.41881 Y93.48098
G01 X53.41675 Y93.49848
G01 X53.39028 Y93.58461
G01 X53.34644 Y93.65710
G01 X53.28650 Y93.71707
G01 X53.28348 Y93.71913
G01 X53.21401 Y93.76088
G01 X53.12788 Y93.78735
G01 X53.11038 Y93.78941
G01 X53.06974 Y93.79058
G01 X51.36974 Y93.79058
G01 X51.32907 Y93.78941
G01 X51.31157 Y93.78735
G01 X51.22544 Y93.76088
G01 X51.15295 Y93.71704
G01 X51.09301 Y93.65710
G01 X51.04917 Y93.58461
G01 X51.02270 Y93.49848
G01 X51.02064 Y93.48098
G01 X51.01947 Y93.44031
G01 X51.01947 Y91.74031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.92167 Y91.74031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.92167 Y91.74031
G01 X55.92167 Y93.44031
G01 X55.92284 Y93.48098
G01 X55.92490 Y93.49848
G01 X55.95137 Y93.58461
G01 X55.99521 Y93.65710
G01 X56.05515 Y93.71704
G01 X56.12764 Y93.76088
G01 X56.21377 Y93.78735
G01 X56.23127 Y93.78941
G01 X56.27194 Y93.79058
G01 X57.97194 Y93.79058
G01 X58.01258 Y93.78941
G01 X58.03008 Y93.78735
G01 X58.11621 Y93.76088
G01 X58.18568 Y93.71913
G01 X58.18870 Y93.71707
G01 X58.24864 Y93.65710
G01 X58.29248 Y93.58461
G01 X58.31895 Y93.49848
G01 X58.32101 Y93.48098
G01 X58.32218 Y93.44031
G01 X58.32218 Y91.74031
G01 X58.32101 Y91.69967
G01 X58.31895 Y91.68217
G01 X58.29248 Y91.59604
G01 X58.24864 Y91.52355
G01 X58.18870 Y91.46361
G01 X58.11621 Y91.41977
G01 X58.03008 Y91.39330
G01 X58.01258 Y91.39124
G01 X57.97194 Y91.39007
G01 X56.27194 Y91.39007
G01 X56.23127 Y91.39124
G01 X56.21377 Y91.39330
G01 X56.12764 Y91.41977
G01 X56.05515 Y91.46361
G01 X55.99518 Y91.52355
G01 X55.95137 Y91.59602
G01 X55.92490 Y91.68217
G01 X55.92284 Y91.69967
G01 X55.92167 Y91.74031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.38171 Y90.21931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.38171 Y90.21931
G01 X62.26890 Y90.14179
G01 X62.16802 Y90.08263
G01 X62.12743 Y90.05706
G01 X62.05747 Y90.00971
G01 X62.05212 Y90.00605
G01 X61.99220 Y89.94611
G01 X61.94836 Y89.87362
G01 X61.92189 Y89.78754
G01 X61.91986 Y89.77004
G01 X61.91866 Y89.72932
G01 X61.91866 Y88.02932
G01 X61.91986 Y87.98861
G01 X61.92189 Y87.97113
G01 X61.94836 Y87.88508
G01 X61.99220 Y87.81253
G01 X62.05212 Y87.75262
G01 X62.12466 Y87.70878
G01 X62.21076 Y87.68228
G01 X62.22821 Y87.68028
G01 X62.26890 Y87.67908
G01 X63.96893 Y87.67908
G01 X64.00962 Y87.68028
G01 X64.02709 Y87.68231
G01 X64.11317 Y87.70878
G01 X64.18572 Y87.75262
G01 X64.24563 Y87.81253
G01 X64.28947 Y87.88508
G01 X64.31594 Y87.97116
G01 X64.31797 Y87.98863
G01 X64.31917 Y88.02932
G01 X64.31917 Y89.72932
G01 X64.31797 Y89.77004
G01 X64.31597 Y89.78749
G01 X64.28947 Y89.87359
G01 X64.24563 Y89.94613
G01 X64.18574 Y90.00603
G01 X64.18046 Y90.00966
G01 X64.08726 Y90.07270
G01 X64.03271 Y90.10641
G01 X63.96893 Y90.14232
G01 X63.85643 Y90.21931
G01 X63.85148 Y90.22272
G01 X63.83827 Y90.29165
G01 X63.83827 Y90.29168
G01 X63.85044 Y90.31662
G01 X63.87385 Y90.36813
G01 X63.87906 Y90.38045
G01 X63.95813 Y90.52810
G01 X63.99354 Y90.58080
G01 X63.99908 Y90.58921
G01 X64.01929 Y90.62023
G01 X64.06976 Y90.68842
G01 X64.09067 Y90.71337
G01 X64.09796 Y90.72363
G01 X64.13514 Y90.78172
G01 X64.18828 Y90.87445
G01 X64.21388 Y90.92858
G01 X64.24020 Y90.99216
G01 X64.26034 Y91.04844
G01 X64.28836 Y91.15167
G01 X64.30314 Y91.21898
G01 X64.30522 Y91.23143
G01 X64.31881 Y91.38487
G01 X64.32102 Y91.41931
G01 X64.31881 Y91.45378
G01 X64.30522 Y91.60722
G01 X64.30314 Y91.61969
G01 X64.28836 Y91.68700
G01 X64.26034 Y91.79020
G01 X64.24020 Y91.84651
G01 X64.21388 Y91.91006
G01 X64.18828 Y91.96419
G01 X64.13514 Y92.05693
G01 X64.12036 Y92.08156
G01 X64.09796 Y92.11502
G01 X64.09059 Y92.12535
G01 X64.08312 Y92.13429
G01 X63.99174 Y92.24341
G01 X63.96895 Y92.26935
G01 X63.94302 Y92.29213
G01 X63.87863 Y92.34605
G01 X63.81833 Y92.40285
G01 X63.79804 Y92.42434
G01 X63.76707 Y92.45525
G01 X63.75300 Y92.46851
G01 X63.64876 Y92.58738
G01 X63.58793 Y92.67056
G01 X63.58790 Y92.67056
G01 X63.58628 Y92.67282
G01 X63.58559 Y92.67376
G01 X63.53433 Y92.68933
G01 X62.70347 Y92.68933
G01 X62.65227 Y92.70485
G01 X62.65161 Y92.70574
G01 X62.64990 Y92.70805
G01 X62.58910 Y92.79126
G01 X62.48496 Y92.91004
G01 X62.47078 Y92.92340
G01 X62.43992 Y92.95421
G01 X62.41953 Y92.97580
G01 X62.35920 Y93.03262
G01 X62.29720 Y93.08451
G01 X62.29484 Y93.08651
G01 X62.26888 Y93.10932
G01 X62.24612 Y93.13523
G01 X62.14721 Y93.25334
G01 X62.13990 Y93.26363
G01 X62.10271 Y93.32172
G01 X62.04958 Y93.41448
G01 X62.02397 Y93.46858
G01 X61.99766 Y93.53211
G01 X61.97749 Y93.58844
G01 X61.94950 Y93.69162
G01 X61.93472 Y93.75898
G01 X61.93261 Y93.77143
G01 X61.91902 Y93.92487
G01 X61.91681 Y93.95931
G01 X61.91902 Y93.99378
G01 X61.93261 Y94.14722
G01 X61.93472 Y94.15969
G01 X61.94950 Y94.22705
G01 X61.97749 Y94.33020
G01 X61.99768 Y94.38656
G01 X62.02397 Y94.45006
G01 X62.04958 Y94.50419
G01 X62.10271 Y94.59693
G01 X62.13990 Y94.65502
G01 X62.14721 Y94.66530
G01 X62.24612 Y94.78341
G01 X62.26890 Y94.80935
G01 X62.29484 Y94.83213
G01 X62.41292 Y94.93104
G01 X62.42321 Y94.93835
G01 X62.48132 Y94.97554
G01 X62.57406 Y95.02867
G01 X62.62819 Y95.05428
G01 X62.69169 Y95.08057
G01 X62.74805 Y95.10076
G01 X62.85120 Y95.12875
G01 X62.91856 Y95.14353
G01 X62.93103 Y95.14564
G01 X63.08447 Y95.15923
G01 X63.11894 Y95.16144
G01 X63.15338 Y95.15923
G01 X63.30682 Y95.14564
G01 X63.31927 Y95.14353
G01 X63.38663 Y95.12875
G01 X63.48981 Y95.10076
G01 X63.54614 Y95.08059
G01 X63.60967 Y95.05428
G01 X63.66377 Y95.02867
G01 X63.75653 Y94.97554
G01 X63.81462 Y94.93835
G01 X63.82491 Y94.93104
G01 X63.94302 Y94.83213
G01 X63.96893 Y94.80935
G01 X63.99174 Y94.78341
G01 X64.09067 Y94.66528
G01 X64.09796 Y94.65502
G01 X64.13514 Y94.59693
G01 X64.18828 Y94.50419
G01 X64.21388 Y94.45006
G01 X64.22051 Y94.43564
G01 X64.24020 Y94.38651
G01 X64.26034 Y94.33020
G01 X64.28836 Y94.22700
G01 X64.30314 Y94.15969
G01 X64.30522 Y94.14722
G01 X64.31881 Y93.99378
G01 X64.32102 Y93.95931
G01 X64.31881 Y93.92487
G01 X64.30522 Y93.77143
G01 X64.30314 Y93.75898
G01 X64.28836 Y93.69167
G01 X64.26034 Y93.58844
G01 X64.24020 Y93.53216
G01 X64.21388 Y93.46858
G01 X64.18828 Y93.41445
G01 X64.13514 Y93.32172
G01 X64.09796 Y93.26363
G01 X64.09064 Y93.25334
G01 X63.99174 Y93.13523
G01 X63.96890 Y93.10927
G01 X63.94302 Y93.08651
G01 X63.94063 Y93.08448
G01 X63.87865 Y93.03262
G01 X63.81833 Y92.97580
G01 X63.81777 Y92.97521
G01 X63.78455 Y92.94222
G01 X63.76616 Y92.92510
G01 X63.64942 Y92.78999
G01 X63.63022 Y92.76264
G01 X63.58709 Y92.70536
G01 X63.58645 Y92.70511
G01 X63.53433 Y92.68933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.58709 Y92.70536 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.58709 Y92.70536
G01 X63.58704 Y92.70465
G01 X63.58790 Y92.67056
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.58910 Y92.79126 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.58910 Y92.79126
G01 X62.64990 Y92.70808
G01 X62.65079 Y92.67399
G01 X62.65072 Y92.67321
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.70347 Y92.68933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.70347 Y92.68933
G01 X62.65143 Y92.67351
G01 X62.65072 Y92.67321
G01 X62.60764 Y92.61603
G01 X62.58841 Y92.58867
G01 X62.47170 Y92.45355
G01 X62.45351 Y92.43663
G01 X62.42026 Y92.40364
G01 X62.41953 Y92.40285
G01 X62.35923 Y92.34605
G01 X62.29484 Y92.29213
G01 X62.26890 Y92.26932
G01 X62.24612 Y92.24341
G01 X62.14721 Y92.12530
G01 X62.13990 Y92.11502
G01 X62.10271 Y92.05693
G01 X62.04958 Y91.96419
G01 X62.02397 Y91.91006
G01 X61.99768 Y91.84656
G01 X61.97749 Y91.79020
G01 X61.94950 Y91.68705
G01 X61.93472 Y91.61969
G01 X61.93261 Y91.60722
G01 X61.91902 Y91.45378
G01 X61.91681 Y91.41933
G01 X61.91902 Y91.38487
G01 X61.93261 Y91.23143
G01 X61.93472 Y91.21898
G01 X61.94950 Y91.15162
G01 X61.97749 Y91.04844
G01 X61.99766 Y90.99211
G01 X62.02397 Y90.92858
G01 X62.04958 Y90.87448
G01 X62.10271 Y90.78172
G01 X62.13990 Y90.72363
G01 X62.14721 Y90.71334
G01 X62.16809 Y90.68842
G01 X62.23301 Y90.59709
G01 X62.23809 Y90.58863
G01 X62.26654 Y90.54474
G01 X62.27889 Y90.52708
G01 X62.36542 Y90.36986
G01 X62.39890 Y90.29165
G01 X62.39893 Y90.29163
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.52999 Y90.21934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.52999 Y90.21934
G01 X62.38171 Y90.21931
G01 X62.38237 Y90.21977
G01 X62.38546 Y90.22889
G01 X62.39974 Y90.28837
G01 X62.39989 Y90.28939
G01 X62.39893 Y90.29163
G01 X62.41572 Y90.28042
G01 X62.52999 Y90.21934
G01 X62.56707 Y90.21004
G01 X62.65945 Y90.19163
G01 X62.82608 Y90.16691
G01 X62.91102 Y90.15853
G01 X63.07767 Y90.15035
G01 X63.16019 Y90.15035
G01 X63.32681 Y90.15853
G01 X63.41173 Y90.16691
G01 X63.57838 Y90.19163
G01 X63.67078 Y90.21004
G01 X63.70774 Y90.21931
G01 X63.82217 Y90.28042
G01 X63.83794 Y90.29096
G01 X63.83827 Y90.29165
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.85643 Y90.21931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.85643 Y90.21931
G01 X63.70774 Y90.21931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.83384 Y82.86032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.83384 Y82.86032
G01 X78.66659 Y82.86032
G01 X78.69999 Y82.86698
G01 X78.85681 Y82.89024
G01 X78.94614 Y82.89906
G01 X79.10296 Y82.90675
G01 X79.18990 Y82.90675
G01 X79.34672 Y82.89906
G01 X79.43600 Y82.89024
G01 X79.59285 Y82.86698
G01 X79.62617 Y82.86032
G01 X79.68358 Y82.83655
G01 X79.82188 Y82.76263
G01 X79.90174 Y82.70927
G01 X79.95731 Y82.66365
G01 X79.98530 Y82.58420
G01 X79.99038 Y82.57008
G01 X80.02168 Y82.48511
G01 X80.07065 Y82.37724
G01 X80.09140 Y82.33947
G01 X80.10760 Y82.30820
G01 X80.12317 Y82.27627
G01 X80.15022 Y82.22606
G01 X80.15807 Y82.21283
G01 X80.19498 Y82.13683
G01 X80.22195 Y82.07356
G01 X80.23473 Y82.03896
G01 X80.26691 Y81.92332
G01 X80.28213 Y81.85596
G01 X80.28230 Y81.85486
G01 X80.29638 Y81.69977
G01 X80.29864 Y81.66533
G01 X80.29638 Y81.63086
G01 X80.28230 Y81.47579
G01 X80.28213 Y81.47470
G01 X80.26691 Y81.40734
G01 X80.23473 Y81.29169
G01 X80.22195 Y81.25707
G01 X80.19495 Y81.19380
G01 X80.15810 Y81.11786
G01 X80.12112 Y81.05545
G01 X80.08317 Y80.99802
G01 X80.05696 Y80.96228
G01 X80.05678 Y80.96203
G01 X80.04692 Y80.94859
G01 X80.03590 Y80.93312
G01 X80.02650 Y80.91956
G01 X79.99407 Y80.86825
G01 X79.96531 Y80.81831
G01 X79.95597 Y80.80249
G01 X79.92312 Y80.74834
G01 X79.89191 Y80.69238
G01 X79.91555 Y80.64211
G01 X79.95223 Y80.56998
G01 X79.96371 Y80.54824
G01 X80.00148 Y80.47945
G01 X80.03044 Y80.43127
G01 X80.05071 Y80.40036
G01 X80.06762 Y80.37320
G01 X80.10458 Y80.31082
G01 X80.14146 Y80.23485
G01 X80.16846 Y80.17153
G01 X80.18124 Y80.13696
G01 X80.21342 Y80.02129
G01 X80.22861 Y79.95400
G01 X80.22881 Y79.95286
G01 X80.24070 Y79.82187
G01 X80.24070 Y79.81405
G01 X80.23458 Y79.79703
G01 X80.20783 Y79.73226
G01 X80.13664 Y79.58169
G01 X80.11228 Y79.53607
G01 X80.02917 Y79.39741
G01 X80.00674 Y79.36378
G01 X79.91230 Y79.23645
G01 X79.89066 Y79.21011
G01 X79.78523 Y79.09373
G01 X79.76252 Y79.07102
G01 X79.64616 Y78.96559
G01 X79.61980 Y78.94397
G01 X79.49247 Y78.84951
G01 X79.45886 Y78.82711
G01 X79.32018 Y78.74400
G01 X79.27456 Y78.71961
G01 X79.12399 Y78.64839
G01 X79.05924 Y78.62165
G01 X79.04014 Y78.61481
G01 X78.99793 Y78.61690
G01 X78.90242 Y78.62957
G01 X78.85099 Y78.63836
G01 X78.83473 Y78.64194
G01 X78.81035 Y78.64766
G01 X78.68487 Y78.68819
G01 X78.65267 Y78.69947
G01 X78.64121 Y78.70382
G01 X78.63161 Y78.70752
G01 X78.61995 Y78.71212
G01 X78.52877 Y78.74133
G01 X78.46613 Y78.75698
G01 X78.45163 Y78.76079
G01 X78.40773 Y78.77265
G01 X78.26852 Y78.68766
G01 X78.20679 Y78.64032
G01 X78.13717 Y78.57930
G01 X77.42740 Y77.86950
G01 X77.39595 Y77.83592
G01 X77.37025 Y77.80664
G01 X77.30179 Y77.71476
G01 X77.29740 Y77.68583
G01 X77.28724 Y77.60872
G01 X77.28117 Y77.51647
G01 X77.28117 Y76.89135
G01 X77.28371 Y76.83161
G01 X77.28800 Y76.78119
G01 X77.30723 Y76.66587
G01 X77.33583 Y76.63283
G01 X77.35567 Y76.61121
G01 X77.40662 Y76.55556
G01 X77.41998 Y76.54243
G01 X77.45374 Y76.50491
G01 X77.55264 Y76.38680
G01 X77.55996 Y76.37651
G01 X77.59714 Y76.31843
G01 X77.64411 Y76.23643
G01 X77.65031 Y76.22566
G01 X77.66268 Y76.19945
G01 X77.67647 Y76.17189
G01 X77.69445 Y76.13781
G01 X77.70840 Y76.10989
G01 X77.72016 Y76.08505
G01 X77.75490 Y76.02013
G01 X77.79051 Y75.96069
G01 X77.82955 Y75.88751
G01 X77.85092 Y75.84235
G01 X77.85092 Y75.26534
G01 X77.83514 Y75.21330
G01 X77.79839 Y75.12455
G01 X77.71983 Y74.97758
G01 X77.66646 Y74.89773
G01 X77.60593 Y74.82397
G01 X77.56075 Y74.76892
G01 X77.49283 Y74.70100
G01 X77.36402 Y74.59529
G01 X77.28417 Y74.54192
G01 X77.13720 Y74.46336
G01 X77.04845 Y74.42661
G01 X76.99633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.16547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.16547 Y74.41083
G01 X76.11343 Y74.39501
G01 X76.02468 Y74.35826
G01 X75.87772 Y74.27969
G01 X75.79786 Y74.22633
G01 X75.66906 Y74.12064
G01 X75.60111 Y74.05269
G01 X75.49542 Y73.92389
G01 X75.44206 Y73.84403
G01 X75.36349 Y73.69707
G01 X75.32674 Y73.60832
G01 X75.31092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.31092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.31092 Y72.72534
G01 X75.29514 Y72.67330
G01 X75.25839 Y72.58455
G01 X75.17983 Y72.43758
G01 X75.12646 Y72.35773
G01 X75.06593 Y72.28397
G01 X75.02075 Y72.22892
G01 X74.95283 Y72.16100
G01 X74.88092 Y72.10200
G01 X74.88092 Y68.86932
G01 X74.87856 Y68.82131
G01 X74.87185 Y68.75301
G01 X74.85311 Y68.65880
G01 X74.83319 Y68.59314
G01 X74.79644 Y68.50442
G01 X74.76408 Y68.44389
G01 X74.71071 Y68.36403
G01 X74.66720 Y68.31100
G01 X74.63489 Y68.27536
G01 X72.71344 Y66.35390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.33711 Y71.78907 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.33711 Y71.78907
G01 X71.36033 Y71.81229
G01 X71.45291 Y71.80317
G01 X71.54897 Y71.80317
G01 X71.64153 Y71.81229
G01 X71.66475 Y71.78907
G01 X71.50094 Y71.77734
G01 X71.33711 Y71.78907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.84664 Y67.36990 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.84664 Y67.36990
G01 X66.84438 Y67.37143
G01 X66.79930 Y67.44953
G01 X66.76765 Y67.54697
G01 X66.75693 Y67.64882
G01 X66.75693 Y67.71001
G01 X66.75950 Y67.73503
G01 X66.76001 Y67.73564
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.12292 Y68.75273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.12292 Y68.75273
G01 X65.13941 Y68.67000
G01 X65.18493 Y68.51991
G01 X65.22168 Y68.43119
G01 X65.29562 Y68.29286
G01 X65.34898 Y68.21301
G01 X65.44848 Y68.09177
G01 X65.51640 Y68.02385
G01 X65.63763 Y67.92436
G01 X65.71749 Y67.87099
G01 X65.76570 Y67.84524
G01 X65.85582 Y67.79706
G01 X65.94454 Y67.76030
G01 X66.09463 Y67.71478
G01 X66.18884 Y67.69604
G01 X66.34492 Y67.68067
G01 X66.44096 Y67.68067
G01 X66.59704 Y67.69604
G01 X66.69125 Y67.71478
G01 X66.76001 Y67.73564
G01 X66.82511 Y67.81359
G01 X66.88657 Y67.87841
G01 X66.93707 Y67.92731
G01 X66.98175 Y67.96688
G01 X67.00603 Y67.98750
G01 X67.06028 Y68.03152
G01 X67.17260 Y68.12134
G01 X67.18210 Y68.13030
G01 X67.22985 Y68.18004
G01 X67.30082 Y68.26167
G01 X67.32965 Y68.30102
G01 X67.36762 Y68.35845
G01 X67.40456 Y68.42085
G01 X67.44146 Y68.49680
G01 X67.46844 Y68.56012
G01 X67.48121 Y68.59469
G01 X67.51342 Y68.71039
G01 X67.52861 Y68.77762
G01 X67.52879 Y68.77877
G01 X67.54286 Y68.93381
G01 X67.54512 Y68.96833
G01 X67.54286 Y69.00282
G01 X67.52879 Y69.15789
G01 X67.52861 Y69.15900
G01 X67.51342 Y69.22626
G01 X67.48121 Y69.34196
G01 X67.46844 Y69.37653
G01 X67.44146 Y69.43985
G01 X67.40456 Y69.51580
G01 X67.36762 Y69.57820
G01 X67.32965 Y69.63563
G01 X67.30082 Y69.67495
G01 X67.22985 Y69.75661
G01 X67.21164 Y69.77676
G01 X67.18289 Y69.80731
G01 X67.13669 Y69.86162
G01 X67.11655 Y69.88775
G01 X67.11020 Y69.91681
G01 X67.09379 Y70.04963
G01 X67.09346 Y70.06106
G01 X67.09315 Y70.08128
G01 X67.09315 Y71.92943
G01 X67.10191 Y72.04033
G01 X67.11159 Y72.10152
G01 X67.11751 Y72.13408
G01 X67.12820 Y72.14769
G01 X67.20197 Y72.22862
G01 X67.21898 Y72.24462
G01 X67.24504 Y72.26799
G01 X67.24974 Y72.27203
G01 X67.27090 Y72.29080
G01 X67.29374 Y72.31673
G01 X67.34763 Y72.38112
G01 X67.40445 Y72.44142
G01 X67.42599 Y72.46177
G01 X67.45683 Y72.49268
G01 X67.47019 Y72.50682
G01 X67.58899 Y72.61099
G01 X67.67214 Y72.67182
G01 X67.70626 Y72.67271
G01 X67.70697 Y72.67266
G01 X67.76422 Y72.62956
G01 X67.79158 Y72.61033
G01 X67.92670 Y72.49359
G01 X67.94359 Y72.47540
G01 X67.97664 Y72.44213
G01 X67.97740 Y72.44142
G01 X68.03422 Y72.38109
G01 X68.08812 Y72.31673
G01 X68.11096 Y72.29077
G01 X68.13679 Y72.26799
G01 X68.25490 Y72.16913
G01 X68.26523 Y72.16179
G01 X68.32332 Y72.12461
G01 X68.41601 Y72.07147
G01 X68.47019 Y72.04589
G01 X68.50163 Y72.03195
G01 X68.53374 Y72.01955
G01 X68.59008 Y71.99938
G01 X68.69325 Y71.97139
G01 X68.76056 Y71.95661
G01 X68.77301 Y71.95453
G01 X68.92647 Y71.94094
G01 X68.96094 Y71.93873
G01 X68.99538 Y71.94094
G01 X69.14882 Y71.95453
G01 X69.16127 Y71.95661
G01 X69.22858 Y71.97139
G01 X69.33178 Y71.99941
G01 X69.38809 Y72.01955
G01 X69.45167 Y72.04589
G01 X69.50577 Y72.07147
G01 X69.59853 Y72.12461
G01 X69.65662 Y72.16179
G01 X69.66688 Y72.16911
G01 X69.78499 Y72.26801
G01 X69.81093 Y72.29080
G01 X69.83371 Y72.31673
G01 X69.93264 Y72.43487
G01 X69.93993 Y72.44513
G01 X69.97714 Y72.50322
G01 X70.03028 Y72.59593
G01 X70.04692 Y72.63121
G01 X70.05611 Y72.64993
G01 X70.07808 Y72.69301
G01 X70.08743 Y72.71206
G01 X70.09503 Y72.72813
G01 X70.12962 Y72.79273
G01 X70.17051 Y72.86100
G01 X70.20955 Y72.93413
G01 X70.23092 Y72.97932
G01 X70.23092 Y73.55620
G01 X70.21512 Y73.60832
G01 X70.17839 Y73.69707
G01 X70.09983 Y73.84403
G01 X70.04644 Y73.92389
G01 X69.94072 Y74.05269
G01 X69.87283 Y74.12064
G01 X69.81773 Y74.16583
G01 X69.74400 Y74.22633
G01 X69.66417 Y74.27969
G01 X69.51720 Y74.35826
G01 X69.42845 Y74.39501
G01 X69.37631 Y74.41083
G01 X68.54545 Y74.41083
G01 X68.49343 Y74.42661
G01 X68.40468 Y74.46336
G01 X68.25769 Y74.54192
G01 X68.17786 Y74.59529
G01 X68.10410 Y74.65582
G01 X68.04906 Y74.70100
G01 X67.98111 Y74.76892
G01 X67.87542 Y74.89773
G01 X67.82206 Y74.97758
G01 X67.74347 Y75.12455
G01 X67.70674 Y75.21330
G01 X67.69092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.54545 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.54545 Y74.41083
G01 X68.49343 Y74.39501
G01 X68.40468 Y74.35826
G01 X68.25769 Y74.27969
G01 X68.17786 Y74.22633
G01 X68.04906 Y74.12064
G01 X67.98111 Y74.05269
G01 X67.87542 Y73.92389
G01 X67.82206 Y73.84403
G01 X67.74347 Y73.69707
G01 X67.70674 Y73.60832
G01 X67.69092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.69092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.69092 Y72.72534
G01 X67.70674 Y72.67330
G01 X67.70697 Y72.67266
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.58899 Y72.61099 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.58899 Y72.61099
G01 X67.67217 Y72.67182
G01 X67.67451 Y72.67352
G01 X67.67537 Y72.67419
G01 X67.69092 Y72.72534
G01 X67.69092 Y73.55620
G01 X67.67514 Y73.60832
G01 X67.63839 Y73.69707
G01 X67.55980 Y73.84403
G01 X67.50646 Y73.92389
G01 X67.40075 Y74.05269
G01 X67.33283 Y74.12064
G01 X67.20402 Y74.22633
G01 X67.12417 Y74.27969
G01 X66.97718 Y74.35826
G01 X66.88845 Y74.39501
G01 X66.83633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.25709 Y77.03260 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.25709 Y77.03260
G01 X66.28035 Y77.00933
G01 X66.37288 Y77.01845
G01 X66.46897 Y77.01845
G01 X66.56150 Y77.00933
G01 X66.58475 Y77.03260
G01 X66.42094 Y77.04431
G01 X66.25709 Y77.03260
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.29633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.29633 Y74.41083
G01 X64.34845 Y74.42661
G01 X64.43720 Y74.46336
G01 X64.58417 Y74.54192
G01 X64.66402 Y74.59529
G01 X64.79283 Y74.70100
G01 X64.86075 Y74.76892
G01 X64.90593 Y74.82397
G01 X64.96646 Y74.89773
G01 X65.01983 Y74.97758
G01 X65.09839 Y75.12455
G01 X65.13514 Y75.21330
G01 X65.15092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.00547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.00547 Y74.41083
G01 X65.95343 Y74.39501
G01 X65.86468 Y74.35826
G01 X65.71772 Y74.27969
G01 X65.63786 Y74.22633
G01 X65.50906 Y74.12064
G01 X65.44111 Y74.05269
G01 X65.33542 Y73.92389
G01 X65.28206 Y73.84403
G01 X65.20349 Y73.69707
G01 X65.16674 Y73.60832
G01 X65.15092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.15092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.15092 Y72.72534
G01 X65.16674 Y72.67330
G01 X65.20349 Y72.58455
G01 X65.28206 Y72.43758
G01 X65.33542 Y72.35773
G01 X65.44111 Y72.22892
G01 X65.50906 Y72.16100
G01 X65.55295 Y72.12499
G01 X65.55295 Y69.94277
G01 X65.51640 Y69.91277
G01 X65.44848 Y69.84485
G01 X65.34898 Y69.72362
G01 X65.29562 Y69.64376
G01 X65.22168 Y69.50543
G01 X65.18493 Y69.41671
G01 X65.13941 Y69.26662
G01 X65.12292 Y69.18374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.34925 Y68.38593 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.34925 Y68.38593
G01 X59.37998 Y68.34001
G01 X59.47948 Y68.21877
G01 X59.54740 Y68.15085
G01 X59.66863 Y68.05136
G01 X59.74849 Y67.99799
G01 X59.88682 Y67.92406
G01 X59.97554 Y67.88730
G01 X60.08326 Y67.85464
G01 X60.12563 Y67.84178
G01 X60.21984 Y67.82304
G01 X60.37592 Y67.80767
G01 X60.47196 Y67.80767
G01 X60.62804 Y67.82304
G01 X60.72225 Y67.84178
G01 X60.87234 Y67.88730
G01 X60.96106 Y67.92406
G01 X61.09939 Y67.99799
G01 X61.17924 Y68.05136
G01 X61.30048 Y68.15085
G01 X61.36840 Y68.21877
G01 X61.46789 Y68.34001
G01 X61.52126 Y68.41986
G01 X61.59519 Y68.55819
G01 X61.63195 Y68.64691
G01 X61.67747 Y68.79700
G01 X61.69621 Y68.89121
G01 X61.71158 Y69.04729
G01 X61.71158 Y69.14333
G01 X61.70695 Y69.19037
G01 X61.90690 Y69.39035
G01 X61.93921 Y69.42598
G01 X61.98272 Y69.47902
G01 X62.03609 Y69.55888
G01 X62.06845 Y69.61938
G01 X62.10520 Y69.70813
G01 X62.12511 Y69.77378
G01 X62.14386 Y69.86799
G01 X62.15057 Y69.93629
G01 X62.15293 Y69.98364
G01 X62.15585 Y72.08140
G01 X62.25283 Y72.16100
G01 X62.32075 Y72.22892
G01 X62.36593 Y72.28397
G01 X62.42646 Y72.35773
G01 X62.47983 Y72.43758
G01 X62.55839 Y72.58455
G01 X62.59514 Y72.67330
G01 X62.61092 Y72.72534
G01 X62.61092 Y73.55620
G01 X62.59514 Y73.60832
G01 X62.55839 Y73.69707
G01 X62.47983 Y73.84403
G01 X62.42646 Y73.92389
G01 X62.32075 Y74.05269
G01 X62.25283 Y74.12064
G01 X62.12402 Y74.22633
G01 X62.04417 Y74.27969
G01 X61.89720 Y74.35826
G01 X61.80845 Y74.39501
G01 X61.75633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.07092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.07092 Y72.72534
G01 X60.05514 Y72.67330
G01 X60.01839 Y72.58455
G01 X59.93983 Y72.43758
G01 X59.88646 Y72.35773
G01 X59.82593 Y72.28397
G01 X59.78075 Y72.22892
G01 X59.71283 Y72.16100
G01 X59.64092 Y72.10200
G01 X59.64089 Y70.11648
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.53092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.53092 Y72.72534
G01 X57.54674 Y72.67330
G01 X57.58349 Y72.58455
G01 X57.66206 Y72.43758
G01 X57.71542 Y72.35773
G01 X57.82111 Y72.22892
G01 X57.88906 Y72.16100
G01 X57.96094 Y72.10200
G01 X57.96094 Y69.37348
G01 X57.49711 Y68.90963
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.19772 Y68.40622 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.19772 Y68.40622
G01 X55.19856 Y68.39139
G01 X55.19884 Y68.38700
G01 X55.19973 Y68.38590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.19330 Y68.38352 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.19330 Y68.38352
G01 X55.19856 Y68.39139
G01 X55.19859 Y68.39142
G01 X55.19772 Y68.40622
G01 X55.19099 Y68.50851
G01 X55.17377 Y68.63338
G01 X55.16531 Y68.67259
G01 X55.16071 Y68.69553
G01 X55.15175 Y68.74442
G01 X55.13745 Y68.80645
G01 X55.11243 Y68.89639
G01 X55.10834 Y68.91178
G01 X55.09724 Y68.96363
G01 X55.09706 Y68.96477
G01 X55.08299 Y69.11981
G01 X55.08070 Y69.15433
G01 X55.08296 Y69.18882
G01 X55.09706 Y69.34386
G01 X55.09724 Y69.34501
G01 X55.11243 Y69.41227
G01 X55.14461 Y69.52794
G01 X55.15739 Y69.56251
G01 X55.18436 Y69.62583
G01 X55.22124 Y69.70178
G01 X55.25820 Y69.76418
G01 X55.29620 Y69.82169
G01 X55.32503 Y69.86096
G01 X55.39602 Y69.94262
G01 X55.41423 Y69.96276
G01 X55.42807 Y69.97749
G01 X55.43600 Y69.98580
G01 X55.44311 Y69.99311
G01 X55.51040 Y70.07323
G01 X55.51421 Y70.09522
G01 X55.52388 Y70.15641
G01 X55.53267 Y70.26728
G01 X55.53267 Y71.97965
G01 X55.53254 Y71.99344
G01 X55.53239 Y72.00119
G01 X55.51865 Y72.12679
G01 X55.50819 Y72.17949
G01 X55.50295 Y72.18653
G01 X55.43503 Y72.26583
G01 X55.42747 Y72.27350
G01 X55.38812 Y72.31673
G01 X55.28921 Y72.43482
G01 X55.28190 Y72.44513
G01 X55.24471 Y72.50322
G01 X55.19155 Y72.59603
G01 X55.17481 Y72.63136
G01 X55.16569 Y72.64993
G01 X55.14382 Y72.69285
G01 X55.13443 Y72.71201
G01 X55.12688 Y72.72796
G01 X55.09221 Y72.79275
G01 X55.05134 Y72.86095
G01 X55.01228 Y72.93413
G01 X54.99092 Y72.97932
G01 X54.99092 Y73.55620
G01 X54.97514 Y73.60832
G01 X54.93839 Y73.69707
G01 X54.85983 Y73.84403
G01 X54.80646 Y73.92389
G01 X54.70075 Y74.05269
G01 X54.63283 Y74.12064
G01 X54.50402 Y74.22633
G01 X54.42417 Y74.27969
G01 X54.27720 Y74.35826
G01 X54.18845 Y74.39501
G01 X54.13633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.35744 Y73.14081 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.35744 Y73.14081
G01 X52.36915 Y72.97700
G01 X52.39242 Y73.00025
G01 X52.38330 Y73.09278
G01 X52.38330 Y73.18884
G01 X52.39242 Y73.28140
G01 X52.36915 Y73.30466
G01 X52.35744 Y73.14081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.55711 Y71.78907 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.55711 Y71.78907
G01 X53.58033 Y71.81229
G01 X53.67291 Y71.80317
G01 X53.76897 Y71.80317
G01 X53.86153 Y71.81229
G01 X53.88475 Y71.78907
G01 X53.72094 Y71.77734
G01 X53.55711 Y71.78907
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.33320 Y67.36990 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.33320 Y67.36990
G01 X59.34925 Y68.38593
G01 X59.35395 Y68.43452
G01 X59.35885 Y68.46762
G01 X59.36510 Y68.51808
G01 X59.37320 Y68.60020
G01 X59.37518 Y68.62370
G01 X59.37902 Y68.67767
G01 X59.38064 Y68.69693
G01 X59.38603 Y68.75171
G01 X59.38900 Y68.81130
G01 X59.38900 Y68.86335
G01 X59.38936 Y68.88291
G01 X59.39053 Y68.91471
G01 X59.39086 Y68.93294
G01 X59.39086 Y69.00188
G01 X59.39027 Y69.02553
G01 X59.38799 Y69.07203
G01 X59.38799 Y69.11857
G01 X59.39571 Y69.27541
G01 X59.40048 Y69.32382
G01 X59.42375 Y69.48067
G01 X59.43462 Y69.53520
G01 X59.47389 Y69.69202
G01 X59.49373 Y69.75727
G01 X59.54983 Y69.91409
G01 X59.58369 Y69.99555
G01 X59.64089 Y70.11648
G01 X59.66863 Y70.13927
G01 X59.74849 Y70.19263
G01 X59.88682 Y70.26657
G01 X59.97554 Y70.30332
G01 X60.04242 Y70.32359
G01 X60.12563 Y70.34884
G01 X60.21984 Y70.36759
G01 X60.37592 Y70.38295
G01 X60.47196 Y70.38295
G01 X60.47295 Y70.38285
G01 X60.47295 Y72.12499
G01 X60.42906 Y72.16100
G01 X60.36111 Y72.22892
G01 X60.25542 Y72.35773
G01 X60.20206 Y72.43758
G01 X60.12349 Y72.58455
G01 X60.08674 Y72.67330
G01 X60.07092 Y72.72534
G01 X60.07092 Y73.55620
G01 X60.05514 Y73.60832
G01 X60.01839 Y73.69707
G01 X59.93983 Y73.84403
G01 X59.88646 Y73.92389
G01 X59.78075 Y74.05269
G01 X59.71283 Y74.12064
G01 X59.58402 Y74.22633
G01 X59.50417 Y74.27969
G01 X59.35720 Y74.35826
G01 X59.26845 Y74.39501
G01 X59.21633 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.07092 Y73.55620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.07092 Y73.55620
G01 X60.08674 Y73.60832
G01 X60.12349 Y73.69707
G01 X60.20206 Y73.84403
G01 X60.25542 Y73.92389
G01 X60.36111 Y74.05269
G01 X60.42906 Y74.12064
G01 X60.55786 Y74.22633
G01 X60.63772 Y74.27969
G01 X60.78468 Y74.35826
G01 X60.87343 Y74.39501
G01 X60.92547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.07092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.07092 Y75.26534
G01 X60.05514 Y75.21330
G01 X60.01839 Y75.12455
G01 X59.93983 Y74.97758
G01 X59.88646 Y74.89773
G01 X59.82593 Y74.82397
G01 X59.78075 Y74.76892
G01 X59.71283 Y74.70100
G01 X59.58402 Y74.59529
G01 X59.50417 Y74.54192
G01 X59.35720 Y74.46336
G01 X59.26845 Y74.42661
G01 X59.21633 Y74.41083
G01 X58.38547 Y74.41083
G01 X58.33343 Y74.39501
G01 X58.24468 Y74.35826
G01 X58.09772 Y74.27969
G01 X58.01786 Y74.22633
G01 X57.88906 Y74.12064
G01 X57.82111 Y74.05269
G01 X57.71542 Y73.92389
G01 X57.66206 Y73.84403
G01 X57.58349 Y73.69707
G01 X57.54674 Y73.60832
G01 X57.53092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.67633 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.67633 Y74.41083
G01 X56.72845 Y74.42661
G01 X56.81720 Y74.46336
G01 X56.96417 Y74.54192
G01 X57.04402 Y74.59529
G01 X57.17283 Y74.70100
G01 X57.24075 Y74.76892
G01 X57.28593 Y74.82397
G01 X57.34646 Y74.89773
G01 X57.39983 Y74.97758
G01 X57.47839 Y75.12455
G01 X57.51514 Y75.21330
G01 X57.53092 Y75.26534
G01 X57.53092 Y76.09620
G01 X57.51514 Y76.14832
G01 X57.47839 Y76.23707
G01 X57.39983 Y76.38403
G01 X57.34646 Y76.46389
G01 X57.24075 Y76.59269
G01 X57.17283 Y76.66064
G01 X57.10092 Y76.71964
G01 X57.10092 Y79.76604
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.49165 Y79.74908 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.49165 Y79.74908
G01 X57.48530 Y79.68433
G01 X57.48530 Y79.58829
G01 X57.50066 Y79.43221
G01 X57.51941 Y79.33800
G01 X57.56493 Y79.18791
G01 X57.60168 Y79.09919
G01 X57.67562 Y78.96086
G01 X57.72898 Y78.88103
G01 X57.82848 Y78.75977
G01 X57.89640 Y78.69185
G01 X57.93295 Y78.66185
G01 X57.93295 Y76.69666
G01 X57.88906 Y76.66064
G01 X57.82111 Y76.59269
G01 X57.71542 Y76.46389
G01 X57.66206 Y76.38403
G01 X57.58349 Y76.23707
G01 X57.54674 Y76.14832
G01 X57.53092 Y76.09620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.53092 Y75.26534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.53092 Y75.26534
G01 X57.54674 Y75.21330
G01 X57.58349 Y75.12455
G01 X57.66206 Y74.97758
G01 X57.71542 Y74.89773
G01 X57.82111 Y74.76892
G01 X57.88906 Y74.70100
G01 X57.94410 Y74.65582
G01 X58.01786 Y74.59529
G01 X58.09772 Y74.54192
G01 X58.24468 Y74.46336
G01 X58.33343 Y74.42661
G01 X58.38547 Y74.41083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.17711 Y77.03260 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.17711 Y77.03260
G01 X61.34094 Y77.04431
G01 X61.50477 Y77.03260
G01 X61.48150 Y77.00933
G01 X61.38897 Y77.01845
G01 X61.29291 Y77.01845
G01 X61.20038 Y77.00933
G01 X61.17711 Y77.03260
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.46547 Y74.41083 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.46547 Y74.41083
G01 X63.41343 Y74.39501
G01 X63.32468 Y74.35826
G01 X63.17772 Y74.27969
G01 X63.09786 Y74.22633
G01 X62.96906 Y74.12064
G01 X62.90111 Y74.05269
G01 X62.79542 Y73.92389
G01 X62.74206 Y73.84403
G01 X62.66349 Y73.69707
G01 X62.62674 Y73.60832
G01 X62.61092 Y73.55620
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.61092 Y72.72534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.61092 Y72.72534
G01 X62.62674 Y72.67330
G01 X62.66349 Y72.58455
G01 X62.74206 Y72.43758
G01 X62.79542 Y72.35773
G01 X62.90111 Y72.22892
G01 X62.96906 Y72.16100
G01 X63.01295 Y72.12499
G01 X63.01295 Y69.94277
G01 X62.97640 Y69.91277
G01 X62.90848 Y69.84485
G01 X62.80898 Y69.72362
G01 X62.75562 Y69.64376
G01 X62.68168 Y69.50543
G01 X62.64493 Y69.41671
G01 X62.59941 Y69.26662
G01 X62.58066 Y69.17241
G01 X62.56530 Y69.01633
G01 X62.56530 Y68.92029
G01 X62.58066 Y68.76421
G01 X62.59941 Y68.67000
G01 X62.64493 Y68.51991
G01 X62.68168 Y68.43119
G01 X62.75562 Y68.29286
G01 X62.80898 Y68.21301
G01 X62.90848 Y68.09177
G01 X62.97640 Y68.02385
G01 X63.09763 Y67.92436
G01 X63.17749 Y67.87099
G01 X63.22570 Y67.84524
G01 X63.31582 Y67.79706
G01 X63.40454 Y67.76030
G01 X63.55463 Y67.71478
G01 X63.64884 Y67.69604
G01 X63.80492 Y67.68067
G01 X63.90096 Y67.68067
G01 X64.05704 Y67.69604
G01 X64.15125 Y67.71478
G01 X64.30134 Y67.76030
G01 X64.39006 Y67.79706
G01 X64.52839 Y67.87099
G01 X64.60824 Y67.92436
G01 X64.72948 Y68.02385
G01 X64.79740 Y68.09177
G01 X64.87792 Y68.18989
G01 X64.89689 Y68.21301
G01 X64.95026 Y68.29286
G01 X65.02419 Y68.43119
G01 X65.06095 Y68.51991
G01 X65.10647 Y68.67000
G01 X65.12292 Y68.75273
G01 X65.12292 Y69.18374
G01 X65.10647 Y69.26662
G01 X65.06095 Y69.41671
G01 X65.02419 Y69.50543
G01 X64.95026 Y69.64376
G01 X64.89689 Y69.72362
G01 X64.79740 Y69.84485
G01 X64.72948 Y69.91277
G01 X64.69326 Y69.94249
G01 X64.69587 Y72.08143
G01 X64.79283 Y72.16100
G01 X64.86075 Y72.22892
G01 X64.90593 Y72.28397
G01 X64.96646 Y72.35773
G01 X65.01983 Y72.43758
G01 X65.09839 Y72.58455
G01 X65.13514 Y72.67330
G01 X65.15092 Y72.72534
G01 X65.15092 Y73.55620
G01 X65.13514 Y73.60832
G01 X65.09839 Y73.69707
G01 X65.01983 Y73.84403
G01 X64.96646 Y73.92389
G01 X64.86075 Y74.05269
G01 X64.79283 Y74.12064
G01 X64.66402 Y74.22633
G01 X64.58417 Y74.27969
G01 X64.43720 Y74.35826
G01 X64.34845 Y74.39501
G01 X64.29633 Y74.41083
G01 X63.46547 Y74.41083
G01 X63.41343 Y74.42661
G01 X63.32468 Y74.46336
G01 X63.17772 Y74.54192
G01 X63.09786 Y74.59529
G01 X63.02410 Y74.65582
G01 X62.96906 Y74.70100
G01 X62.90111 Y74.76892
G01 X62.79542 Y74.89773
G01 X62.74206 Y74.97758
G01 X62.66349 Y75.12455
G01 X62.62674 Y75.21330
G01 X62.61092 Y75.26534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.81329 Y81.89233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.81329 Y81.89233
G01 X55.72543 Y81.84432
G01 X55.46686 Y81.84432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X55.64461 Y81.66665 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X55.64461 Y81.66665
G01 X55.46686 Y81.84432
G01 X54.87575 Y82.08915
G01 X54.85218 Y82.09827
G01 X54.78358 Y82.12283
G01 X54.74329 Y82.13508
G01 X54.67469 Y82.15225
G01 X54.63968 Y82.15923
G01 X54.57108 Y82.16942
G01 X54.53907 Y82.17257
G01 X54.47047 Y82.17594
G01 X54.45495 Y82.17633
G01 X52.16892 Y82.17633
G01 X52.15341 Y82.17671
G01 X52.08477 Y82.18008
G01 X52.05277 Y82.18323
G01 X51.98416 Y82.19342
G01 X51.94916 Y82.20040
G01 X51.88770 Y82.21580
G01 X51.88190 Y82.22009
G01 X51.85224 Y82.24440
G01 X51.80134 Y82.29055
G01 X51.78792 Y82.30333
G01 X44.29492 Y89.79633
G01 X44.28151 Y89.80910
G01 X44.23061 Y89.85525
G01 X44.20094 Y89.87956
G01 X44.19515 Y89.88385
G01 X44.13369 Y89.89925
G01 X44.09868 Y89.90623
G01 X44.03008 Y89.91642
G01 X43.99807 Y89.91957
G01 X43.92947 Y89.92294
G01 X43.91395 Y89.92333
G01 X27.91195 Y89.92333
G01 X27.89641 Y89.92371
G01 X27.82777 Y89.92708
G01 X27.79577 Y89.93023
G01 X27.72716 Y89.94042
G01 X27.69216 Y89.94740
G01 X27.62356 Y89.96457
G01 X27.58327 Y89.97682
G01 X27.51467 Y90.00138
G01 X27.49110 Y90.01050
G01 X26.89999 Y90.25533
G01 X26.68508 Y90.25530
G01 X24.05293 Y92.88745
G01 X24.05293 Y94.25451
G01 X24.12484 Y94.31349
G01 X24.19275 Y94.38143
G01 X24.23792 Y94.43645
G01 X24.29847 Y94.51024
G01 X24.35184 Y94.59009
G01 X24.43037 Y94.73706
G01 X24.46713 Y94.82580
G01 X24.48292 Y94.87785
G01 X24.48292 Y95.70871
G01 X24.46713 Y95.76083
G01 X24.43037 Y95.84958
G01 X24.35184 Y95.99654
G01 X24.29847 Y96.07640
G01 X24.19275 Y96.20520
G01 X24.12484 Y96.27312
G01 X23.99603 Y96.37884
G01 X23.91615 Y96.43220
G01 X23.88059 Y96.45123
G01 X23.76921 Y96.51074
G01 X23.68046 Y96.54752
G01 X23.52100 Y96.59588
G01 X23.42679 Y96.61463
G01 X23.26096 Y96.63096
G01 X23.16492 Y96.63096
G01 X22.99908 Y96.61463
G01 X22.90487 Y96.59588
G01 X22.74541 Y96.54752
G01 X22.65666 Y96.51074
G01 X22.50973 Y96.43220
G01 X22.42984 Y96.37884
G01 X22.30104 Y96.27312
G01 X22.23312 Y96.20520
G01 X22.18793 Y96.15014
G01 X22.12740 Y96.07640
G01 X22.07404 Y95.99654
G01 X21.99550 Y95.84958
G01 X21.95875 Y95.76083
G01 X21.94292 Y95.70871
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.94292 Y94.87785 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.94292 Y94.87785
G01 X21.92713 Y94.82580
G01 X21.89037 Y94.73706
G01 X21.81184 Y94.59009
G01 X21.75847 Y94.51024
G01 X21.69792 Y94.43645
G01 X21.65275 Y94.38143
G01 X21.58484 Y94.31349
G01 X21.51293 Y94.25451
G01 X21.51293 Y92.79378
G01 X25.06738 Y89.23930
G01 X25.32519 Y89.23933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89999 Y90.25533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89999 Y90.25533
G01 X25.15897 Y91.99635
G01 X25.12666 Y92.03198
G01 X25.08315 Y92.08502
G01 X25.02979 Y92.16488
G01 X24.99743 Y92.22538
G01 X24.96067 Y92.31413
G01 X24.94076 Y92.37978
G01 X24.92201 Y92.47399
G01 X24.91531 Y92.54229
G01 X24.91295 Y92.59030
G01 X24.91295 Y94.25451
G01 X24.84104 Y94.31349
G01 X24.77312 Y94.38143
G01 X24.66740 Y94.51024
G01 X24.61404 Y94.59009
G01 X24.53550 Y94.73706
G01 X24.49875 Y94.82580
G01 X24.48292 Y94.87785
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.81692 Y97.38336 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.81692 Y97.38336
G01 X21.85669 Y97.32389
G01 X21.98105 Y97.17236
G01 X22.04897 Y97.10444
G01 X22.20051 Y96.98008
G01 X22.28039 Y96.92669
G01 X22.39680 Y96.86448
G01 X22.45326 Y96.83428
G01 X22.54201 Y96.79753
G01 X22.72961 Y96.74063
G01 X22.82382 Y96.72189
G01 X23.01892 Y96.70266
G01 X23.11496 Y96.70266
G01 X23.31005 Y96.72189
G01 X23.40426 Y96.74063
G01 X23.59187 Y96.79753
G01 X23.68061 Y96.83428
G01 X23.85349 Y96.92669
G01 X23.93337 Y96.98008
G01 X24.07193 Y97.09377
G01 X24.08491 Y97.10444
G01 X24.15283 Y97.17236
G01 X24.27718 Y97.32389
G01 X24.31694 Y97.38336
G01 X24.31694 Y100.43120
G01 X24.28445 Y100.45229
G01 X24.26550 Y100.46511
G01 X24.20914 Y100.50034
G01 X24.20871 Y100.50057
G01 X24.06250 Y100.60824
G01 X24.04780 Y100.62211
G01 X24.03975 Y100.62958
G01 X23.99870 Y100.66707
G01 X23.99674 Y100.66885
G01 X23.95679 Y100.70507
G01 X23.84541 Y100.79343
G01 X23.81783 Y100.81426
G01 X23.78816 Y100.83171
G01 X23.66385 Y100.90080
G01 X23.61513 Y100.92384
G01 X23.55156 Y100.95018
G01 X23.50076 Y100.96836
G01 X23.42855 Y100.98899
G01 X23.36403 Y101.00740
G01 X23.33063 Y101.01604
G01 X23.29644 Y101.02084
G01 X23.15519 Y101.03710
G01 X23.10129 Y101.03974
G01 X23.03251 Y101.03974
G01 X22.97866 Y101.03710
G01 X22.83741 Y101.02084
G01 X22.80322 Y101.01604
G01 X22.76982 Y101.00740
G01 X22.63309 Y100.96834
G01 X22.58229 Y100.95018
G01 X22.51872 Y100.92384
G01 X22.47000 Y100.90077
G01 X22.34569 Y100.83171
G01 X22.31595 Y100.81421
G01 X22.28844 Y100.79343
G01 X22.17706 Y100.70507
G01 X22.13711 Y100.66885
G01 X22.13515 Y100.66707
G01 X22.08600 Y100.62219
G01 X22.05131 Y100.59244
G01 X22.00261 Y100.55328
G01 X21.92672 Y100.49930
G01 X21.85067 Y100.45155
G01 X21.81692 Y100.43123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.31692 Y100.43123 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.31692 Y100.43123
G01 X19.35068 Y100.45155
G01 X19.42667 Y100.49928
G01 X19.50254 Y100.55323
G01 X19.55126 Y100.59242
G01 X19.58598 Y100.62216
G01 X19.63516 Y100.66707
G01 X19.67707 Y100.70507
G01 X19.78842 Y100.79343
G01 X19.81595 Y100.81421
G01 X19.84570 Y100.83171
G01 X19.97000 Y100.90077
G01 X20.01875 Y100.92384
G01 X20.08230 Y100.95018
G01 X20.13310 Y100.96834
G01 X20.26983 Y101.00740
G01 X20.30323 Y101.01604
G01 X20.33742 Y101.02084
G01 X20.47867 Y101.03710
G01 X20.53251 Y101.03974
G01 X20.60130 Y101.03974
G01 X20.65517 Y101.03710
G01 X20.79644 Y101.02084
G01 X20.83066 Y101.01604
G01 X20.86403 Y101.00740
G01 X20.92855 Y100.98899
G01 X21.00071 Y100.96836
G01 X21.05156 Y100.95018
G01 X21.11514 Y100.92384
G01 X21.16383 Y100.90080
G01 X21.28816 Y100.83171
G01 X21.31788 Y100.81421
G01 X21.34541 Y100.79343
G01 X21.45679 Y100.70504
G01 X21.49675 Y100.66885
G01 X21.53962 Y100.62970
G01 X21.54780 Y100.62211
G01 X21.56238 Y100.60837
G01 X21.70871 Y100.50057
G01 X21.70914 Y100.50032
G01 X21.76553 Y100.46509
G01 X21.78450 Y100.45226
G01 X21.81692 Y100.43123
G01 X21.81692 Y97.38336
G01 X21.77719 Y97.32389
G01 X21.65283 Y97.17236
G01 X21.58489 Y97.10444
G01 X21.57193 Y97.09380
G01 X21.43335 Y96.98008
G01 X21.35349 Y96.92669
G01 X21.18059 Y96.83428
G01 X21.09187 Y96.79753
G01 X20.90427 Y96.74063
G01 X20.81006 Y96.72189
G01 X20.61496 Y96.70266
G01 X20.51890 Y96.70266
G01 X20.32383 Y96.72189
G01 X20.22962 Y96.74063
G01 X20.04201 Y96.79753
G01 X19.95327 Y96.83428
G01 X19.87702 Y96.87505
G01 X19.78039 Y96.92669
G01 X19.70051 Y96.98008
G01 X19.54897 Y97.10444
G01 X19.48105 Y97.17236
G01 X19.35670 Y97.32389
G01 X19.31692 Y97.38336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.81693 Y97.38338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.81693 Y97.38338
G01 X16.85668 Y97.32389
G01 X16.98103 Y97.17236
G01 X17.04898 Y97.10444
G01 X17.20052 Y96.98008
G01 X17.28037 Y96.92669
G01 X17.35789 Y96.88526
G01 X17.45327 Y96.83428
G01 X17.54202 Y96.79753
G01 X17.72960 Y96.74063
G01 X17.82381 Y96.72189
G01 X18.01890 Y96.70266
G01 X18.11497 Y96.70266
G01 X18.31006 Y96.72189
G01 X18.40427 Y96.74063
G01 X18.59185 Y96.79753
G01 X18.68060 Y96.83428
G01 X18.85350 Y96.92669
G01 X18.93335 Y96.98008
G01 X19.07191 Y97.09377
G01 X19.08489 Y97.10444
G01 X19.15281 Y97.17236
G01 X19.27719 Y97.32389
G01 X19.31692 Y97.38336
G01 X19.31692 Y100.43123
G01 X19.28451 Y100.45226
G01 X19.26549 Y100.46514
G01 X19.20912 Y100.50034
G01 X19.20872 Y100.50057
G01 X19.06239 Y100.60837
G01 X19.04781 Y100.62211
G01 X19.03963 Y100.62970
G01 X18.99675 Y100.66885
G01 X18.95680 Y100.70504
G01 X18.84542 Y100.79343
G01 X18.81789 Y100.81421
G01 X18.78814 Y100.83171
G01 X18.66384 Y100.90080
G01 X18.61509 Y100.92386
G01 X18.55154 Y100.95018
G01 X18.50074 Y100.96836
G01 X18.42853 Y100.98899
G01 X18.36406 Y101.00738
G01 X18.33064 Y101.01604
G01 X18.29645 Y101.02084
G01 X18.15517 Y101.03710
G01 X18.10130 Y101.03974
G01 X18.03254 Y101.03974
G01 X17.97867 Y101.03710
G01 X17.83740 Y101.02084
G01 X17.80323 Y101.01604
G01 X17.76978 Y101.00738
G01 X17.63308 Y100.96834
G01 X17.58230 Y100.95018
G01 X17.51873 Y100.92384
G01 X17.46998 Y100.90077
G01 X17.34570 Y100.83171
G01 X17.31593 Y100.81421
G01 X17.28840 Y100.79343
G01 X17.17705 Y100.70504
G01 X17.13709 Y100.66885
G01 X17.08594 Y100.62216
G01 X17.05129 Y100.59244
G01 X17.00257 Y100.55328
G01 X16.92668 Y100.49928
G01 X16.85068 Y100.45155
G01 X16.81693 Y100.43123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.40156 Y100.61142 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.40156 Y100.61142
G01 X14.35668 Y100.55673
G01 X14.31693 Y100.49722
G01 X14.31693 Y97.38338
G01 X14.35668 Y97.32389
G01 X14.48106 Y97.17236
G01 X14.54898 Y97.10444
G01 X14.70052 Y96.98008
G01 X14.78038 Y96.92669
G01 X14.83923 Y96.89524
G01 X14.95328 Y96.83428
G01 X15.04202 Y96.79753
G01 X15.22960 Y96.74063
G01 X15.32381 Y96.72189
G01 X15.51891 Y96.70266
G01 X15.61497 Y96.70266
G01 X15.81002 Y96.72189
G01 X15.90428 Y96.74063
G01 X16.09186 Y96.79753
G01 X16.18058 Y96.83428
G01 X16.35350 Y96.92669
G01 X16.43333 Y96.98008
G01 X16.57189 Y97.09380
G01 X16.58487 Y97.10444
G01 X16.65282 Y97.17236
G01 X16.77717 Y97.32389
G01 X16.81693 Y97.38338
G01 X16.81693 Y100.43123
G01 X16.78451 Y100.45226
G01 X16.76549 Y100.46514
G01 X16.70913 Y100.50034
G01 X16.70872 Y100.50057
G01 X16.56252 Y100.60824
G01 X16.54781 Y100.62211
G01 X16.53973 Y100.62960
G01 X16.49869 Y100.66707
G01 X16.45678 Y100.70507
G01 X16.34542 Y100.79343
G01 X16.31782 Y100.81426
G01 X16.28815 Y100.83171
G01 X16.16384 Y100.90080
G01 X16.11510 Y100.92386
G01 X16.05155 Y100.95018
G01 X16.00075 Y100.96834
G01 X15.92848 Y100.98899
G01 X15.86407 Y101.00738
G01 X15.83064 Y101.01604
G01 X15.79645 Y101.02084
G01 X15.65515 Y101.03710
G01 X15.60131 Y101.03974
G01 X15.53255 Y101.03974
G01 X15.47868 Y101.03710
G01 X15.33740 Y101.02084
G01 X15.30324 Y101.01604
G01 X15.26979 Y101.00738
G01 X15.13311 Y100.96834
G01 X15.08231 Y100.95018
G01 X15.01876 Y100.92384
G01 X14.96999 Y100.90077
G01 X14.84571 Y100.83174
G01 X14.81518 Y100.81373
G01 X14.78757 Y100.79447
G01 X14.72945 Y100.75795
G01 X14.67537 Y100.72742
G01 X14.61439 Y100.69648
G01 X14.53776 Y100.66173
G01 X14.41409 Y100.61528
G01 X14.40156 Y100.61142
G01 X14.35335 Y100.62569
G01 X14.26146 Y100.66341
G01 X14.17906 Y100.71888
G01 X14.16514 Y100.73047
G01 X14.13936 Y100.75399
G01 X14.13207 Y100.76062
G01 X14.06468 Y100.82803
G01 X13.90763 Y100.94853
G01 X13.90692 Y100.94893
G01 X13.90692 Y100.91822
G01 X13.93336 Y100.90054
G01 X14.08490 Y100.77619
G01 X14.15282 Y100.70827
G01 X14.27718 Y100.55673
G01 X14.31693 Y100.49722
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.55694 Y98.09136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.55694 Y98.09136
G01 X11.55694 Y98.10032
G01 X11.58343 Y98.10032
G01 X11.59852 Y97.94719
G01 X11.61724 Y97.85298
G01 X11.67416 Y97.66540
G01 X11.71092 Y97.57665
G01 X11.80332 Y97.40375
G01 X11.85669 Y97.32389
G01 X11.98104 Y97.17236
G01 X12.04899 Y97.10444
G01 X12.20053 Y96.98008
G01 X12.21292 Y96.97177
G01 X12.21292 Y96.63332
G01 X12.20294 Y96.63332
G01 X12.10733 Y96.62390
G01 X12.01541 Y96.59601
G01 X11.93070 Y96.55074
G01 X11.85646 Y96.48978
G01 X11.79552 Y96.41554
G01 X11.75023 Y96.33083
G01 X11.72235 Y96.23891
G01 X11.71295 Y96.14330
G01 X11.71295 Y96.13332
G01 X11.69293 Y96.13332
G01 X11.69293 Y96.17957
G01 X11.69748 Y96.23076
G01 X11.72687 Y96.33350
G01 X11.77487 Y96.42542
G01 X11.86321 Y96.53375
G01 X11.87490 Y96.54866
G01 X11.87977 Y96.55514
G01 X11.92593 Y96.62943
G01 X11.95816 Y96.71074
G01 X11.97553 Y96.76941
G01 X11.99418 Y96.87012
G01 X11.99151 Y96.97249
G01 X11.96761 Y97.07208
G01 X11.94719 Y97.12976
G01 X11.91589 Y97.20004
G01 X11.87398 Y97.26456
G01 X11.80871 Y97.34962
G01 X11.70975 Y97.52105
G01 X11.63398 Y97.70390
G01 X11.58277 Y97.89512
G01 X11.55694 Y98.09136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.55694 Y99.78033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.55694 Y99.78033
G01 X11.55694 Y99.78929
G01 X11.58277 Y99.98554
G01 X11.63398 Y100.17675
G01 X11.70975 Y100.35960
G01 X11.80871 Y100.53103
G01 X11.92920 Y100.68805
G01 X12.06918 Y100.82803
G01 X12.22621 Y100.94853
G01 X12.22692 Y100.94893
G01 X12.22692 Y100.91820
G01 X12.20053 Y100.90054
G01 X12.04899 Y100.77619
G01 X11.98104 Y100.70827
G01 X11.85669 Y100.55673
G01 X11.80332 Y100.47687
G01 X11.71092 Y100.30398
G01 X11.67416 Y100.21523
G01 X11.61724 Y100.02765
G01 X11.59852 Y99.93344
G01 X11.58343 Y99.78033
G01 X11.55694 Y99.78033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.31693 Y97.38338 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.31693 Y97.38338
G01 X14.27718 Y97.32389
G01 X14.15282 Y97.17236
G01 X14.08490 Y97.10444
G01 X14.07192 Y97.09380
G01 X13.93336 Y96.98008
G01 X13.90692 Y96.96240
G01 X13.90692 Y96.63291
G01 X13.99854 Y96.62390
G01 X14.09046 Y96.59601
G01 X14.17517 Y96.55074
G01 X14.24942 Y96.48978
G01 X14.31035 Y96.41554
G01 X14.35564 Y96.33083
G01 X14.38353 Y96.23891
G01 X14.39293 Y96.14330
G01 X14.39290 Y95.88214
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.64218 Y93.81732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.64218 Y93.81732
G01 X16.01850 Y93.81732
G01 X16.04847 Y93.85385
G01 X16.11639 Y93.92177
G01 X16.23763 Y94.02126
G01 X16.31748 Y94.07463
G01 X16.45581 Y94.14856
G01 X16.54454 Y94.18532
G01 X16.69462 Y94.23084
G01 X16.78881 Y94.24958
G01 X16.94492 Y94.26495
G01 X17.04095 Y94.26495
G01 X17.19704 Y94.24958
G01 X17.29124 Y94.23084
G01 X17.29292 Y94.23033
G01 X17.37895 Y94.11430
G01 X17.40781 Y94.07734
G01 X17.40839 Y94.07663
G01 X17.45576 Y94.01313
G01 X17.45680 Y94.01156
G01 X17.49706 Y93.95730
G01 X17.54418 Y93.89990
G01 X17.56318 Y93.87788
G01 X17.58101 Y93.85822
G01 X17.59813 Y93.83838
G01 X17.62597 Y93.80447
G01 X17.65810 Y93.76899
G01 X17.70529 Y93.72179
G01 X17.70686 Y93.72024
G01 X17.72277 Y93.70417
G01 X17.73686 Y93.68931
G01 X17.84232 Y93.57295
G01 X17.87240 Y93.53630
G01 X17.96681 Y93.40897
G01 X17.99696 Y93.36383
G01 X18.08007 Y93.22515
G01 X18.11144 Y93.16632
G01 X18.18266 Y93.01578
G01 X18.21578 Y92.93564
G01 X18.22955 Y92.89711
G01 X18.22365 Y92.77724
G01 X18.21489 Y92.68860
G01 X18.19162 Y92.53178
G01 X18.18190 Y92.48296
G01 X18.16419 Y92.44019
G01 X18.09025 Y92.30188
G01 X18.03689 Y92.22200
G01 X18.01829 Y92.19937
G01 X18.01829 Y92.19934
G01 X17.87905 Y92.14862
G01 X17.80359 Y92.11314
G01 X17.77801 Y92.10054
G01 X17.73658 Y92.07915
G01 X17.68045 Y92.04847
G01 X17.66277 Y92.03752
G01 X17.64070 Y92.02335
G01 X17.60333 Y92.00176
G01 X17.46521 Y91.92746
G01 X17.45561 Y91.92241
G01 X17.40097 Y91.90219
G01 X17.27542 Y91.86162
G01 X17.25111 Y91.85594
G01 X17.18335 Y91.84354
G01 X17.08792 Y91.83089
G01 X17.02734 Y91.82792
G01 X16.95850 Y91.82792
G01 X16.89790 Y91.83089
G01 X16.80245 Y91.84354
G01 X16.73471 Y91.85594
G01 X16.71037 Y91.86162
G01 X16.58487 Y91.90219
G01 X16.53016 Y91.92241
G01 X16.52063 Y91.92744
G01 X16.43051 Y91.97592
G01 X16.38253 Y92.00173
G01 X16.36272 Y92.01281
G01 X16.33557 Y92.03269
G01 X16.32551 Y92.04057
G01 X16.21327 Y92.13033
G01 X16.20992 Y92.13351
G01 X16.20367 Y92.13930
G01 X16.18365 Y92.15781
G01 X16.16943 Y92.17133
G01 X16.15348 Y92.18692
G01 X16.07377 Y92.25428
G01 X16.04913 Y92.25863
G01 X15.98795 Y92.26830
G01 X15.87705 Y92.27707
G01 X8.83607 Y92.27707
G01 X8.80848 Y92.27653
G01 X8.79296 Y92.27592
G01 X8.65804 Y92.25764
G01 X8.65329 Y92.25423
G01 X8.60315 Y92.21781
G01 X8.51839 Y92.14550
G01 X4.74075 Y88.36785
G01 X4.72162 Y88.34797
G01 X4.71108 Y88.33656
G01 X4.62861 Y88.22823
G01 X4.62764 Y88.22226
G01 X4.61797 Y88.16107
G01 X4.60918 Y88.05018
G01 X4.60918 Y68.40820
G01 X4.60834 Y68.37376
G01 X4.60664 Y68.33952
G01 X4.60161 Y68.30549
G01 X4.58817 Y68.23805
G01 X4.57981 Y68.20470
G01 X4.56826 Y68.17239
G01 X4.54192 Y68.10879
G01 X4.52724 Y68.07773
G01 X4.50961 Y68.04829
G01 X4.47133 Y67.99101
G01 X4.45088 Y67.96345
G01 X4.42780 Y67.93797
G01 X4.40407 Y67.91308
G01 X4.18370 Y67.69271
G01 X4.06503 Y67.65027
G01 X4.00913 Y67.62718
G01 X3.85856 Y67.55593
G01 X3.82051 Y67.53564
G01 X3.68182 Y67.45253
G01 X3.65487 Y67.43455
G01 X3.52754 Y67.34011
G01 X3.50710 Y67.32332
G01 X3.39074 Y67.21788
G01 X3.37337 Y67.20051
G01 X3.26793 Y67.08415
G01 X3.25114 Y67.06371
G01 X3.15670 Y66.93638
G01 X3.13872 Y66.90943
G01 X3.05561 Y66.77074
G01 X3.03532 Y66.73269
G01 X2.96407 Y66.58212
G01 X2.94098 Y66.52622
G01 X2.89854 Y66.40755
G01 X2.74974 Y66.25875
G01 X2.73062 Y66.23887
G01 X2.72008 Y66.22746
G01 X2.63760 Y66.11913
G01 X2.63664 Y66.11316
G01 X2.63265 Y66.08791
G01 X2.56346 Y65.92091
G01 X2.55249 Y65.89249
G01 X2.52793 Y65.82388
G01 X2.51286 Y65.77435
G01 X2.49569 Y65.70575
G01 X2.48696 Y65.66196
G01 X2.47677 Y65.59335
G01 X2.47278 Y65.55284
G01 X2.46940 Y65.48418
G01 X2.46892 Y65.46445
G01 X2.46892 Y57.46992
G01 X2.46676 Y57.46401
G01 X2.44220 Y57.39540
G01 X2.43212 Y57.36223
G01 X2.41492 Y57.29360
G01 X2.40928 Y57.26533
G01 X2.39910 Y57.19670
G01 X2.39658 Y57.17124
G01 X2.39320 Y57.10261
G01 X2.39293 Y57.09032
G01 X2.39293 Y54.44232
G01 X2.39320 Y54.43005
G01 X2.39658 Y54.36142
G01 X2.39910 Y54.33600
G01 X2.40928 Y54.26736
G01 X2.41172 Y54.25334
G01 X2.41987 Y54.24176
G01 X2.46118 Y54.18606
G01 X2.47743 Y54.16625
G01 X2.52356 Y54.11535
G01 X2.53202 Y54.10648
G01 X3.62704 Y53.01146
G01 X3.63593 Y53.00300
G01 X3.68683 Y52.95685
G01 X3.70661 Y52.94062
G01 X3.76232 Y52.89929
G01 X3.78629 Y52.88329
G01 X3.84695 Y52.84695
G01 X3.87753 Y52.83064
G01 X3.94342 Y52.79947
G01 X3.96290 Y52.79084
G01 X4.06468 Y52.74867
G01 X4.06773 Y52.74529
G01 X4.17316 Y52.62894
G01 X4.20654 Y52.59556
G01 X4.32289 Y52.49013
G01 X4.36110 Y52.45878
G01 X4.48843 Y52.36435
G01 X4.53531 Y52.33305
G01 X4.67400 Y52.24994
G01 X4.73483 Y52.21748
G01 X4.74382 Y52.21322
G01 X7.98806 Y48.96898
G01 X8.01179 Y48.94408
G01 X8.03488 Y48.91861
G01 X8.05532 Y48.89105
G01 X8.05700 Y48.88876
G01 X8.09357 Y48.83377
G01 X8.11123 Y48.80433
G01 X8.12591 Y48.77327
G01 X8.13007 Y48.76433
G01 X8.14237 Y48.73570
G01 X8.15225 Y48.70967
G01 X8.16383 Y48.67731
G01 X8.17216 Y48.64401
G01 X8.18560 Y48.57655
G01 X8.19063 Y48.54251
G01 X8.19233 Y48.50824
G01 X8.19317 Y48.47380
G01 X8.19317 Y47.81660
G01 X8.19535 Y47.76141
G01 X8.19779 Y47.73042
G01 X8.23282 Y47.55686
G01 X8.25271 Y47.49567
G01 X8.27087 Y47.44508
G01 X8.47036 Y47.38584
G01 X8.53155 Y47.37617
G01 X8.64242 Y47.36738
G01 X17.95512 Y47.36738
G01 X17.98959 Y47.36654
G01 X18.02383 Y47.36484
G01 X18.05787 Y47.35981
G01 X18.12530 Y47.34637
G01 X18.15863 Y47.33802
G01 X18.19096 Y47.32646
G01 X18.25457 Y47.30012
G01 X18.28563 Y47.28544
G01 X18.31507 Y47.26781
G01 X18.37234 Y47.22953
G01 X18.39990 Y47.20909
G01 X18.42538 Y47.18600
G01 X18.45027 Y47.16227
G01 X19.41946 Y46.19311
G01 X19.43935 Y46.17398
G01 X19.45075 Y46.16344
G01 X19.56419 Y46.07782
G01 X19.57242 Y46.07277
G01 X19.62502 Y46.06705
G01 X19.67625 Y46.06332
G01 X19.73714 Y46.06103
G01 X19.74542 Y46.06067
G01 X19.80600 Y46.05770
G01 X19.90148 Y46.04503
G01 X19.96919 Y46.03266
G01 X19.99350 Y46.02697
G01 X20.11903 Y45.98641
G01 X20.17371 Y45.96619
G01 X20.18319 Y45.96118
G01 X20.32131 Y45.88691
G01 X20.34115 Y45.87584
G01 X20.37834 Y45.84805
G01 X20.49068 Y45.75826
G01 X20.50015 Y45.74930
G01 X20.54793 Y45.69951
G01 X20.61887 Y45.61793
G01 X20.62804 Y45.60538
G01 X20.64834 Y45.57907
G01 X20.68540 Y45.53322
G01 X20.69218 Y45.52471
G01 X20.71743 Y45.49253
G01 X20.79888 Y45.40391
G01 X20.86403 Y45.34297
G01 X20.89116 Y45.31851
G01 X20.91682 Y45.29616
G01 X20.95133 Y45.30739
G01 X21.18941 Y45.42626
G01 X21.23952 Y45.46268
G01 X21.32423 Y45.53495
G01 X22.99977 Y47.21048
G01 X23.02466 Y47.23418
G01 X23.05014 Y47.25727
G01 X23.07769 Y47.27772
G01 X23.13500 Y47.31599
G01 X23.16441 Y47.33365
G01 X23.19550 Y47.34833
G01 X23.25908 Y47.37467
G01 X23.29141 Y47.38622
G01 X23.32474 Y47.39458
G01 X23.39220 Y47.40799
G01 X23.42618 Y47.41305
G01 X23.46050 Y47.41472
G01 X23.49494 Y47.41559
G01 X31.50056 Y47.41559
G01 X31.54197 Y47.41681
G01 X31.56526 Y47.41818
G01 X31.72203 Y47.44492
G01 X31.78324 Y47.46220
G01 X31.98545 Y47.55531
G01 X32.00115 Y47.56255
G01 X32.02850 Y47.61295
G01 X32.05192 Y47.66946
G01 X32.08106 Y47.76773
G01 X32.08908 Y47.86992
G01 X32.07570 Y47.97154
G01 X32.06140 Y48.03105
G01 X32.02721 Y48.12757
G01 X31.97369 Y48.21487
G01 X31.90320 Y48.28914
G01 X31.85670 Y48.32887
G01 X31.79444 Y48.37411
G01 X31.72586 Y48.40903
G01 X31.70907 Y48.41597
G01 X31.55472 Y48.50509
G01 X31.41331 Y48.61360
G01 X31.26224 Y48.76471
G01 X31.24458 Y48.77919
G01 X31.24555 Y48.78023
G01 X31.23270 Y48.79194
G01 X31.22711 Y48.79603
G01 X31.19835 Y48.81711
G01 X31.18797 Y48.82564
G01 X31.18342 Y48.82808
G01 X31.14898 Y48.85333
G01 X31.05421 Y48.89570
G01 X30.99602 Y48.91462
G01 X30.94273 Y48.92595
G01 X30.85812 Y48.88754
G01 X30.72581 Y48.81358
G01 X30.70387 Y48.79859
G01 X30.67288 Y48.77850
G01 X30.64131 Y48.75909
G01 X30.57852 Y48.71576
G01 X30.50679 Y48.66034
G01 X30.45017 Y48.62092
G01 X30.43950 Y48.61421
G01 X30.30293 Y48.54294
G01 X30.27194 Y48.52773
G01 X30.23930 Y48.51660
G01 X30.09231 Y48.47042
G01 X30.08002 Y48.46760
G01 X30.01215 Y48.45546
G01 X29.90610 Y48.44185
G01 X29.84634 Y48.43893
G01 X29.77753 Y48.43893
G01 X29.71774 Y48.44185
G01 X29.61172 Y48.45546
G01 X29.54382 Y48.46760
G01 X29.53153 Y48.47042
G01 X29.38454 Y48.51660
G01 X29.35190 Y48.52773
G01 X29.32091 Y48.54297
G01 X29.18434 Y48.61424
G01 X29.17367 Y48.62092
G01 X29.13209 Y48.64909
G01 X29.11708 Y48.66034
G01 X29.03250 Y48.72572
G01 X28.98815 Y48.76590
G01 X28.93951 Y48.81454
G01 X28.88309 Y48.87677
G01 X28.84375 Y48.91688
G01 X28.82411 Y48.93540
G01 X28.82104 Y48.93832
G01 X28.77006 Y48.98696
G01 X28.67377 Y49.06610
G01 X28.62699 Y49.09943
G01 X28.61810 Y49.10580
G01 X28.57100 Y49.14007
G01 X28.57022 Y49.14065
G01 X28.56194 Y49.16062
G01 X28.56194 Y50.36592
G01 X28.57001 Y50.38548
G01 X28.57029 Y50.38569
G01 X28.57032 Y50.38569
G01 X28.62945 Y50.42597
G01 X28.75373 Y50.52714
G01 X28.76780 Y50.54093
G01 X28.80009 Y50.57088
G01 X28.82373 Y50.59155
G01 X28.88309 Y50.64990
G01 X28.93951 Y50.71210
G01 X28.98815 Y50.76074
G01 X29.03250 Y50.80095
G01 X29.11708 Y50.86630
G01 X29.17362 Y50.90570
G01 X29.18434 Y50.91241
G01 X29.32086 Y50.98368
G01 X29.35190 Y50.99892
G01 X29.38459 Y51.01009
G01 X29.53153 Y51.05625
G01 X29.54387 Y51.05906
G01 X29.61172 Y51.07118
G01 X29.71774 Y51.08479
G01 X29.77753 Y51.08774
G01 X29.84634 Y51.08774
G01 X29.90610 Y51.08479
G01 X30.01215 Y51.07118
G01 X30.07997 Y51.05906
G01 X30.09231 Y51.05625
G01 X30.23925 Y51.01009
G01 X30.27194 Y50.99892
G01 X30.30295 Y50.98370
G01 X30.43950 Y50.91243
G01 X30.45022 Y50.90570
G01 X30.50679 Y50.86630
G01 X30.57852 Y50.81088
G01 X30.61027 Y50.78772
G01 X30.62840 Y50.77525
G01 X30.64077 Y50.76691
G01 X30.70211 Y50.72660
G01 X30.76846 Y50.68736
G01 X30.82703 Y50.65627
G01 X30.85921 Y50.63999
G01 X30.94667 Y50.59775
G01 X30.95083 Y50.59153
G01 X31.02937 Y50.44459
G01 X31.06193 Y50.36595
G01 X31.06193 Y49.16064
G01 X31.09449 Y49.08206
G01 X31.17306 Y48.93509
G01 X31.22642 Y48.85523
G01 X31.33211 Y48.72643
G01 X31.40006 Y48.65849
G01 X31.52886 Y48.55280
G01 X31.60872 Y48.49943
G01 X31.75568 Y48.42087
G01 X31.84443 Y48.38411
G01 X32.00386 Y48.33575
G01 X32.09807 Y48.31701
G01 X32.18324 Y48.30863
G01 X32.26391 Y48.30068
G01 X32.35997 Y48.30068
G01 X32.52578 Y48.31701
G01 X32.61999 Y48.33575
G01 X32.77945 Y48.38411
G01 X32.86820 Y48.42087
G01 X32.98527 Y48.48345
G01 X33.01275 Y48.50382
G01 X33.08596 Y48.56387
G01 X33.20958 Y48.67591
G01 X33.27435 Y48.74068
G01 X33.38639 Y48.86430
G01 X33.44643 Y48.93750
G01 X33.46668 Y48.96481
G01 X33.52939 Y49.08206
G01 X33.56614 Y49.17080
G01 X33.61450 Y49.33024
G01 X33.63325 Y49.42445
G01 X33.64958 Y49.59028
G01 X33.65194 Y49.63832
G01 X33.65194 Y49.88830
G01 X33.64958 Y49.93633
G01 X33.63325 Y50.10217
G01 X33.61450 Y50.19638
G01 X33.56614 Y50.35584
G01 X33.52939 Y50.44459
G01 X33.45083 Y50.59153
G01 X33.39746 Y50.67141
G01 X33.29175 Y50.80021
G01 X33.22383 Y50.86813
G01 X33.15192 Y50.92714
G01 X33.15192 Y50.95802
G01 X33.21054 Y50.91304
G01 X33.33663 Y50.78695
G01 X33.44514 Y50.64553
G01 X33.53432 Y50.49110
G01 X33.60252 Y50.32645
G01 X33.64864 Y50.15422
G01 X33.65593 Y50.09884
G01 X33.67386 Y50.01726
G01 X33.68382 Y49.98525
G01 X33.73228 Y49.87748
G01 X33.79578 Y49.79635
G01 X33.80511 Y49.78442
G01 X33.84836 Y49.74113
G01 X33.92799 Y49.67664
G01 X34.01928 Y49.63011
G01 X34.10637 Y49.60674
G01 X34.10917 Y49.60728
G01 X34.11915 Y49.60921
G01 X34.18445 Y49.63044
G01 X34.42278 Y49.74942
G01 X34.47292 Y49.78584
G01 X34.55758 Y49.85808
G01 X36.28138 Y51.58187
G01 X36.30627 Y51.60560
G01 X36.33175 Y51.62869
G01 X36.35930 Y51.64913
G01 X36.41658 Y51.68741
G01 X36.44602 Y51.70504
G01 X36.47708 Y51.71972
G01 X36.54069 Y51.74606
G01 X36.57302 Y51.75762
G01 X36.60634 Y51.76597
G01 X36.67381 Y51.77941
G01 X36.70782 Y51.78444
G01 X36.74211 Y51.78614
G01 X36.77655 Y51.78698
G01 X38.43852 Y51.78698
G01 X38.47297 Y51.78614
G01 X38.50723 Y51.78444
G01 X38.54124 Y51.77941
G01 X38.60868 Y51.76597
G01 X38.64203 Y51.75762
G01 X38.67434 Y51.74606
G01 X38.73794 Y51.71974
G01 X38.76903 Y51.70504
G01 X38.79844 Y51.68741
G01 X38.85572 Y51.64913
G01 X38.88328 Y51.62869
G01 X38.90875 Y51.60560
G01 X38.93364 Y51.58190
G01 X39.71007 Y50.80547
G01 X39.73380 Y50.78058
G01 X39.75881 Y50.75297
G01 X39.77868 Y50.72864
G01 X39.82447 Y50.67502
G01 X39.83334 Y50.66483
G01 X39.87113 Y50.62216
G01 X39.87502 Y50.61774
G01 X39.92424 Y50.56133
G01 X39.95711 Y50.52564
G01 X40.00431 Y50.53209
G01 X40.09864 Y50.55058
G01 X40.15958 Y50.56638
G01 X40.16328 Y50.56735
G01 X40.23156 Y50.58543
G01 X40.26798 Y50.59612
G01 X40.35742 Y50.62503
G01 X40.38170 Y50.63072
G01 X40.44947 Y50.64311
G01 X40.54492 Y50.65576
G01 X40.60552 Y50.65874
G01 X40.67433 Y50.65874
G01 X40.73494 Y50.65576
G01 X40.83036 Y50.64311
G01 X40.89811 Y50.63072
G01 X40.92246 Y50.62503
G01 X40.96524 Y50.61121
G01 X41.04797 Y50.58447
G01 X41.10263 Y50.56425
G01 X41.11220 Y50.55919
G01 X41.25033 Y50.48490
G01 X41.27011 Y50.47385
G01 X41.27611 Y50.46963
G01 X41.30727 Y50.44611
G01 X41.41962 Y50.35630
G01 X41.42912 Y50.34733
G01 X41.47685 Y50.29760
G01 X41.54781 Y50.21596
G01 X41.57667 Y50.17664
G01 X41.61461 Y50.11919
G01 X41.65157 Y50.05681
G01 X41.68845 Y49.98083
G01 X41.71545 Y49.91756
G01 X41.72823 Y49.88294
G01 X41.76041 Y49.76732
G01 X41.77563 Y49.69996
G01 X41.77580 Y49.69887
G01 X41.78987 Y49.54378
G01 X41.79214 Y49.50933
G01 X41.78987 Y49.47487
G01 X41.77580 Y49.31977
G01 X41.77563 Y49.31868
G01 X41.76041 Y49.25135
G01 X41.72823 Y49.13570
G01 X41.71545 Y49.10108
G01 X41.68845 Y49.03781
G01 X41.65157 Y48.96184
G01 X41.61461 Y48.89946
G01 X41.57667 Y48.84200
G01 X41.54781 Y48.80268
G01 X41.47685 Y48.72105
G01 X41.42912 Y48.67131
G01 X41.41962 Y48.66235
G01 X41.30727 Y48.57253
G01 X41.27009 Y48.54479
G01 X41.25028 Y48.53372
G01 X41.11218 Y48.45945
G01 X41.10265 Y48.45442
G01 X41.04804 Y48.43423
G01 X40.92246 Y48.39364
G01 X40.89816 Y48.38795
G01 X40.83036 Y48.37555
G01 X40.73491 Y48.36288
G01 X40.67433 Y48.35991
G01 X40.60552 Y48.35991
G01 X40.54492 Y48.36288
G01 X40.44947 Y48.37553
G01 X40.43842 Y48.37710
G01 X40.38094 Y48.38564
G01 X40.35417 Y48.38912
G01 X40.30664 Y48.39438
G01 X40.22112 Y48.39902
G01 X40.13540 Y48.39902
G01 X40.06593 Y48.39659
G01 X40.03641 Y48.39455
G01 X40.01802 Y48.35844
G01 X39.93364 Y48.10576
G01 X39.92397 Y48.04457
G01 X39.91518 Y47.93367
G01 X39.91518 Y44.43193
G01 X39.91434 Y44.39746
G01 X39.91264 Y44.36322
G01 X39.90761 Y44.32918
G01 X39.89417 Y44.26175
G01 X39.88581 Y44.22842
G01 X39.87426 Y44.19609
G01 X39.84792 Y44.13248
G01 X39.83324 Y44.10142
G01 X39.81561 Y44.07198
G01 X39.77733 Y44.01470
G01 X39.75688 Y43.98715
G01 X39.73380 Y43.96167
G01 X39.71007 Y43.93678
G01 X37.01882 Y41.24550
G01 X36.94482 Y41.15842
G01 X36.90860 Y41.10813
G01 X36.79006 Y40.86825
G01 X36.76908 Y40.80272
G01 X36.76796 Y40.79701
G01 X36.76771 Y40.79559
G01 X36.79321 Y40.70338
G01 X36.84051 Y40.61245
G01 X36.90568 Y40.53333
G01 X36.94932 Y40.49043
G01 X36.96842 Y40.47521
G01 X36.96974 Y40.47509
G01 X37.08389 Y40.46607
G01 X37.17149 Y40.46526
G01 X37.23685 Y40.46729
G01 X37.29941 Y40.47184
G01 X37.33240 Y40.47499
G01 X37.40147 Y40.48317
G01 X37.41117 Y40.48438
G01 X37.49694 Y40.49576
G01 X37.55752 Y40.49874
G01 X37.62633 Y40.49874
G01 X37.68689 Y40.49576
G01 X37.78236 Y40.48311
G01 X37.85011 Y40.47072
G01 X37.87441 Y40.46503
G01 X37.90365 Y40.45558
G01 X37.99997 Y40.42447
G01 X38.05465 Y40.40425
G01 X38.06420 Y40.39919
G01 X38.20233 Y40.32490
G01 X38.22209 Y40.31385
G01 X38.25927 Y40.28611
G01 X38.27685 Y40.27207
G01 X38.37162 Y40.19630
G01 X38.38112 Y40.18733
G01 X38.42885 Y40.13760
G01 X38.49981 Y40.05596
G01 X38.52867 Y40.01664
G01 X38.56481 Y39.96221
G01 X38.56522 Y39.96155
G01 X38.56664 Y39.95919
G01 X38.57970 Y39.93813
G01 X38.58800 Y39.92525
G01 X38.66006 Y39.83132
G01 X38.67843 Y39.81098
G01 X38.71213 Y39.77113
G01 X38.72018 Y39.76099
G01 X38.83136 Y39.64344
G01 X38.84932 Y39.62724
G01 X38.84932 Y39.62721
G01 X38.84957 Y39.62701
G01 X38.86420 Y39.55342
G01 X38.87957 Y39.39734
G01 X38.87957 Y39.30128
G01 X38.86420 Y39.14522
G01 X38.84911 Y39.06935
G01 X38.84784 Y39.06826
G01 X38.83253 Y39.05490
G01 X38.71018 Y38.92813
G01 X38.67042 Y38.87824
G01 X38.66110 Y38.86676
G01 X38.63067 Y38.83006
G01 X38.56661 Y38.73946
G01 X38.56565 Y38.73780
G01 X38.52867 Y38.68200
G01 X38.49981 Y38.64268
G01 X38.42885 Y38.56105
G01 X38.38112 Y38.51131
G01 X38.37162 Y38.50235
G01 X38.25927 Y38.41253
G01 X38.22209 Y38.38479
G01 X38.20228 Y38.37372
G01 X38.06418 Y38.29945
G01 X38.05465 Y38.29442
G01 X38.00004 Y38.27423
G01 X37.87446 Y38.23364
G01 X37.85016 Y38.22795
G01 X37.78236 Y38.21555
G01 X37.68691 Y38.20288
G01 X37.62633 Y38.19991
G01 X37.55752 Y38.19991
G01 X37.49694 Y38.20288
G01 X37.40147 Y38.21555
G01 X37.33365 Y38.22795
G01 X37.30939 Y38.23364
G01 X37.18381 Y38.27423
G01 X37.12918 Y38.29442
G01 X37.11968 Y38.29945
G01 X36.98158 Y38.37372
G01 X36.96174 Y38.38479
G01 X36.92458 Y38.41253
G01 X36.81221 Y38.50235
G01 X36.80274 Y38.51129
G01 X36.75501 Y38.56105
G01 X36.68404 Y38.64268
G01 X36.65519 Y38.68200
G01 X36.61727 Y38.73940
G01 X36.58026 Y38.80184
G01 X36.54340 Y38.87776
G01 X36.51638 Y38.94113
G01 X36.50360 Y38.97570
G01 X36.47142 Y39.09140
G01 X36.45623 Y39.15868
G01 X36.45605 Y39.15977
G01 X36.44198 Y39.31487
G01 X36.43972 Y39.34933
G01 X36.44198 Y39.38378
G01 X36.45613 Y39.53999
G01 X36.45844 Y39.56168
G01 X36.46426 Y39.60946
G01 X36.46878 Y39.66208
G01 X36.47157 Y39.71779
G01 X36.47249 Y39.77082
G01 X36.47114 Y39.85952
G01 X36.46230 Y39.96429
G01 X36.46215 Y39.96625
G01 X36.44234 Y39.99043
G01 X36.39908 Y40.03369
G01 X36.31945 Y40.09815
G01 X36.22819 Y40.14463
G01 X36.14112 Y40.16798
G01 X36.12834 Y40.16551
G01 X36.06301 Y40.14428
G01 X35.82479 Y40.02536
G01 X35.77467 Y39.98893
G01 X35.68994 Y39.91664
G01 X35.57632 Y39.80300
G01 X35.55748 Y39.78342
G01 X35.54694 Y39.77202
G01 X35.46421 Y39.66343
G01 X35.46324 Y39.65746
G01 X35.45357 Y39.59627
G01 X35.44478 Y39.48538
G01 X35.44478 Y37.51792
G01 X35.44394 Y37.48348
G01 X35.44224 Y37.44921
G01 X35.43721 Y37.41520
G01 X35.42377 Y37.34776
G01 X35.41541 Y37.31441
G01 X35.40386 Y37.28210
G01 X35.37754 Y37.21850
G01 X35.36284 Y37.18741
G01 X35.34521 Y37.15800
G01 X35.30693 Y37.10072
G01 X35.28648 Y37.07316
G01 X35.26340 Y37.04769
G01 X35.23967 Y37.02280
G01 X35.16652 Y36.94962
G01 X34.02306 Y35.80619
G01 X33.99817 Y35.78246
G01 X33.97267 Y35.75937
G01 X33.94514 Y35.73893
G01 X33.89106 Y35.70261
G01 X33.88786 Y35.70065
G01 X33.85842 Y35.68302
G01 X33.82736 Y35.66832
G01 X33.76375 Y35.64198
G01 X33.73145 Y35.63042
G01 X33.69810 Y35.62206
G01 X33.63066 Y35.60865
G01 X33.59665 Y35.60362
G01 X33.56238 Y35.60192
G01 X33.52794 Y35.60108
G01 X33.00843 Y35.60108
G01 X32.98088 Y35.60055
G01 X32.96536 Y35.59994
G01 X32.82451 Y35.58025
G01 X32.81519 Y35.57802
G01 X32.77389 Y35.54477
G01 X32.73505 Y35.51124
G01 X32.69043 Y35.46984
G01 X32.68433 Y35.46423
G01 X32.64290 Y35.42669
G01 X32.60386 Y35.39651
G01 X32.56416 Y35.36347
G01 X32.51941 Y35.32333
G01 X32.51136 Y35.31622
G01 X32.47216 Y35.28206
G01 X32.39375 Y35.20355
G01 X32.33229 Y35.13314
G01 X32.28606 Y35.07563
G01 X32.19424 Y35.04779
G01 X32.11141 Y35.03131
G01 X30.88040 Y35.03133
G01 X30.79762 Y35.04779
G01 X30.64756 Y35.09331
G01 X30.55881 Y35.13006
G01 X30.42050 Y35.20400
G01 X30.34062 Y35.25737
G01 X30.21939 Y35.35686
G01 X30.15147 Y35.42478
G01 X30.05198 Y35.54601
G01 X29.99861 Y35.62587
G01 X29.92470 Y35.76418
G01 X29.88794 Y35.85292
G01 X29.84240 Y36.00301
G01 X29.82368 Y36.09722
G01 X29.80829 Y36.25328
G01 X29.80829 Y36.34934
G01 X29.82368 Y36.50542
G01 X29.84240 Y36.59963
G01 X29.88794 Y36.74970
G01 X29.92470 Y36.83844
G01 X29.99861 Y36.97675
G01 X30.05198 Y37.05663
G01 X30.15147 Y37.17786
G01 X30.21939 Y37.24578
G01 X30.34062 Y37.34527
G01 X30.42050 Y37.39864
G01 X30.55881 Y37.47255
G01 X30.64756 Y37.50931
G01 X30.79762 Y37.55485
G01 X30.88040 Y37.57133
G01 X32.11141 Y37.57133
G01 X32.19424 Y37.58779
G01 X32.34433 Y37.63331
G01 X32.43307 Y37.67006
G01 X32.57138 Y37.74400
G01 X32.65123 Y37.79737
G01 X32.77247 Y37.89686
G01 X32.84039 Y37.96478
G01 X32.93988 Y38.08601
G01 X32.99325 Y38.16587
G01 X33.06718 Y38.30418
G01 X33.10394 Y38.39292
G01 X33.14946 Y38.54301
G01 X33.16820 Y38.63722
G01 X33.18357 Y38.79328
G01 X33.18357 Y38.88934
G01 X33.16820 Y39.04542
G01 X33.14946 Y39.13963
G01 X33.10394 Y39.28970
G01 X33.06718 Y39.37844
G01 X32.99325 Y39.51675
G01 X32.93988 Y39.59663
G01 X32.84039 Y39.71786
G01 X32.77247 Y39.78578
G01 X32.65123 Y39.88527
G01 X32.57138 Y39.93864
G01 X32.43307 Y40.01255
G01 X32.34433 Y40.04931
G01 X32.19424 Y40.09485
G01 X32.11141 Y40.11133
G01 X30.88040 Y40.11133
G01 X30.79762 Y40.12779
G01 X30.64756 Y40.17331
G01 X30.55881 Y40.21006
G01 X30.42050 Y40.28400
G01 X30.34062 Y40.33737
G01 X30.21939 Y40.43686
G01 X30.15147 Y40.50478
G01 X30.05198 Y40.62601
G01 X29.99861 Y40.70587
G01 X29.92470 Y40.84418
G01 X29.88794 Y40.93292
G01 X29.84240 Y41.08301
G01 X29.82368 Y41.17722
G01 X29.80829 Y41.33328
G01 X29.80829 Y41.42934
G01 X29.82368 Y41.58542
G01 X29.84240 Y41.67963
G01 X29.88794 Y41.82970
G01 X29.92470 Y41.91844
G01 X29.99861 Y42.05675
G01 X30.05198 Y42.13663
G01 X30.15147 Y42.25786
G01 X30.21939 Y42.32578
G01 X30.34062 Y42.42527
G01 X30.42050 Y42.47864
G01 X30.55881 Y42.55255
G01 X30.64756 Y42.58931
G01 X30.79762 Y42.63485
G01 X30.88040 Y42.65133
G01 X32.11141 Y42.65131
G01 X32.19424 Y42.63485
G01 X32.34433 Y42.58931
G01 X32.43307 Y42.55255
G01 X32.57138 Y42.47864
G01 X32.65123 Y42.42527
G01 X32.77247 Y42.32578
G01 X32.84039 Y42.25786
G01 X32.87039 Y42.22131
G01 X33.68799 Y42.22131
G01 X36.75194 Y45.28526
G01 X36.75194 Y48.53486
G01 X36.71539 Y48.56486
G01 X36.64747 Y48.63278
G01 X36.54798 Y48.75401
G01 X36.49461 Y48.83387
G01 X36.42070 Y48.97218
G01 X36.38394 Y49.06092
G01 X36.33840 Y49.21101
G01 X36.31968 Y49.30522
G01 X36.30739 Y49.42963
G01 X36.31925 Y49.46278
G01 X36.35618 Y49.55221
G01 X36.42740 Y49.70281
G01 X36.46314 Y49.76979
G01 X36.54625 Y49.90844
G01 X36.58115 Y49.96072
G01 X36.67558 Y50.08805
G01 X36.71081 Y50.13097
G01 X36.81625 Y50.24733
G01 X36.85392 Y50.28500
G01 X36.97028 Y50.39044
G01 X37.01320 Y50.42567
G01 X37.04162 Y50.44672
G01 X37.16344 Y50.47725
G01 X37.21335 Y50.48721
G01 X37.37017 Y50.51048
G01 X37.41409 Y50.51479
G01 X37.57093 Y50.52252
G01 X37.61292 Y50.52252
G01 X37.76974 Y50.51479
G01 X37.81366 Y50.51048
G01 X37.97048 Y50.48721
G01 X38.02041 Y50.47725
G01 X38.17048 Y50.43966
G01 X38.17596 Y50.43560
G01 X38.22059 Y50.39897
G01 X38.33695 Y50.29353
G01 X38.37614 Y50.25434
G01 X38.48158 Y50.13798
G01 X38.51823 Y50.09333
G01 X38.55884 Y50.03857
G01 X38.58122 Y49.94919
G01 X38.59209 Y49.89470
G01 X38.61536 Y49.73788
G01 X38.62016 Y49.68940
G01 X38.62785 Y49.53255
G01 X38.62785 Y49.48609
G01 X38.62016 Y49.32927
G01 X38.61536 Y49.28081
G01 X38.59209 Y49.12397
G01 X38.58122 Y49.06946
G01 X38.54195 Y48.91264
G01 X38.52211 Y48.84739
G01 X38.46601 Y48.69057
G01 X38.43215 Y48.60911
G01 X38.40342 Y48.54835
G01 X38.40342 Y44.93733
G01 X38.40230 Y44.89194
G01 X38.39892 Y44.82334
G01 X38.39494 Y44.77157
G01 X38.37454 Y44.73579
G01 X38.33817 Y44.67513
G01 X38.29009 Y44.60307
G01 X38.24878 Y44.54737
G01 X38.19740 Y44.48476
G01 X38.15127 Y44.43386
G01 X38.12402 Y44.40523
G01 X34.56802 Y40.84923
G01 X34.53939 Y40.82198
G01 X34.48849 Y40.77585
G01 X34.42588 Y40.72447
G01 X34.37018 Y40.68316
G01 X34.29812 Y40.63508
G01 X34.23746 Y40.59871
G01 X34.15263 Y40.55342
G01 X34.14526 Y40.54971
G01 X34.08395 Y40.54369
G01 X34.03594 Y40.54133
G01 X32.87039 Y40.54133
G01 X32.84039 Y40.50478
G01 X32.77247 Y40.43686
G01 X32.65123 Y40.33737
G01 X32.57138 Y40.28400
G01 X32.43307 Y40.21006
G01 X32.34433 Y40.17331
G01 X32.19424 Y40.12779
G01 X32.11141 Y40.11133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.11141 Y42.65131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.11141 Y42.65131
G01 X32.19424 Y42.66779
G01 X32.34433 Y42.71331
G01 X32.43307 Y42.75006
G01 X32.57138 Y42.82400
G01 X32.65123 Y42.87737
G01 X32.77247 Y42.97686
G01 X32.84039 Y43.04478
G01 X32.93988 Y43.16601
G01 X32.99325 Y43.24587
G01 X33.06718 Y43.38418
G01 X33.10394 Y43.47292
G01 X33.14946 Y43.62301
G01 X33.16820 Y43.71722
G01 X33.18357 Y43.87328
G01 X33.18357 Y43.96934
G01 X33.16820 Y44.12542
G01 X33.14946 Y44.21963
G01 X33.10394 Y44.36970
G01 X33.06718 Y44.45844
G01 X32.99325 Y44.59675
G01 X32.93988 Y44.67663
G01 X32.84039 Y44.79786
G01 X32.77247 Y44.86578
G01 X32.65123 Y44.96527
G01 X32.57138 Y45.01864
G01 X32.43307 Y45.09255
G01 X32.34433 Y45.12931
G01 X32.19424 Y45.17485
G01 X32.10003 Y45.19357
G01 X31.94397 Y45.20896
G01 X31.89594 Y45.21132
G01 X31.09594 Y45.21132
G01 X31.04791 Y45.20896
G01 X30.89183 Y45.19357
G01 X30.79762 Y45.17485
G01 X30.64756 Y45.12931
G01 X30.55881 Y45.09255
G01 X30.42050 Y45.01864
G01 X30.34062 Y44.96527
G01 X30.21939 Y44.86578
G01 X30.15147 Y44.79786
G01 X30.05198 Y44.67663
G01 X29.99861 Y44.59675
G01 X29.92470 Y44.45844
G01 X29.88794 Y44.36970
G01 X29.84240 Y44.21963
G01 X29.82368 Y44.12542
G01 X29.80829 Y43.96934
G01 X29.80829 Y43.87328
G01 X29.82368 Y43.71722
G01 X29.84240 Y43.62301
G01 X29.88794 Y43.47292
G01 X29.92470 Y43.38418
G01 X29.99861 Y43.24587
G01 X30.05198 Y43.16601
G01 X30.15147 Y43.04478
G01 X30.21939 Y42.97686
G01 X30.34062 Y42.87737
G01 X30.42050 Y42.82400
G01 X30.55881 Y42.75006
G01 X30.64756 Y42.71331
G01 X30.79762 Y42.66779
G01 X30.88040 Y42.65133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.98545 Y47.55531 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.98545 Y47.55531
G01 X32.05718 Y47.55531
G01 X32.98527 Y48.48345
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.46668 Y48.96481 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.46668 Y48.96481
G01 X34.10917 Y49.60728
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.94273 Y48.92595 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.94273 Y48.92595
G01 X30.94273 Y48.92597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.85812 Y48.88754 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.85812 Y48.88754
G01 X30.94273 Y48.92597
G01 X30.94560 Y48.92727
G01 X30.95083 Y48.93509
G01 X31.02937 Y49.08206
G01 X31.06193 Y49.16064
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.06193 Y50.36595 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.06193 Y50.36595
G01 X31.09449 Y50.44459
G01 X31.17306 Y50.59153
G01 X31.22642 Y50.67141
G01 X31.25119 Y50.70159
G01 X31.33211 Y50.80021
G01 X31.40006 Y50.86813
G01 X31.47191 Y50.92711
G01 X31.47191 Y50.95800
G01 X31.41331 Y50.91304
G01 X31.26224 Y50.76194
G01 X31.15710 Y50.68200
G01 X31.10765 Y50.65401
G01 X31.01697 Y50.61418
G01 X30.94474 Y50.59869
G01 X30.85921 Y50.63999
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.61810 Y49.10580 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.61810 Y49.10580
G01 X28.57105 Y49.14007
G01 X28.57100 Y49.14007
G01 X28.55353 Y49.14098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.56194 Y49.16062 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.56194 Y49.16062
G01 X28.55388 Y49.14124
G01 X28.55353 Y49.14098
G01 X28.49442 Y49.10072
G01 X28.37001 Y48.99943
G01 X28.35607 Y48.98574
G01 X28.32363 Y48.95567
G01 X28.30011 Y48.93509
G01 X28.24075 Y48.87675
G01 X28.18434 Y48.81454
G01 X28.13570 Y48.76590
G01 X28.09138 Y48.72572
G01 X28.00677 Y48.66034
G01 X27.95018 Y48.62092
G01 X27.93948 Y48.61421
G01 X27.80293 Y48.54297
G01 X27.77195 Y48.52773
G01 X27.73931 Y48.51660
G01 X27.59232 Y48.47042
G01 X27.58002 Y48.46760
G01 X27.51213 Y48.45546
G01 X27.40611 Y48.44185
G01 X27.34632 Y48.43893
G01 X27.27751 Y48.43893
G01 X27.21774 Y48.44185
G01 X27.11170 Y48.45546
G01 X27.04383 Y48.46760
G01 X27.03154 Y48.47042
G01 X26.88455 Y48.51660
G01 X26.85188 Y48.52773
G01 X26.82089 Y48.54294
G01 X26.76788 Y48.57063
G01 X26.68437 Y48.61421
G01 X26.67367 Y48.62092
G01 X26.61711 Y48.66031
G01 X26.53248 Y48.72572
G01 X26.48815 Y48.76588
G01 X26.43946 Y48.81457
G01 X26.38310 Y48.87675
G01 X26.34363 Y48.91701
G01 X26.32407 Y48.93542
G01 X26.32092 Y48.93844
G01 X26.27007 Y48.98696
G01 X26.17378 Y49.06610
G01 X26.12696 Y49.09943
G01 X26.11813 Y49.10578
G01 X26.07106 Y49.14007
G01 X26.07101 Y49.14007
G01 X26.05351 Y49.14096
G01 X25.99445 Y49.10078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.05351 Y49.14096 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.05351 Y49.14096
G01 X26.05351 Y49.14098
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.11813 Y49.10578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.11813 Y49.10578
G01 X26.07101 Y49.14007
G01 X26.07022 Y49.14065
G01 X26.06192 Y49.16059
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.06192 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.06192 Y50.36592
G01 X26.07002 Y50.38548
G01 X26.07030 Y50.38569
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.05280 Y50.38657 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.05280 Y50.38657
G01 X26.07032 Y50.38569
G01 X26.12945 Y50.42597
G01 X26.25374 Y50.52714
G01 X26.26781 Y50.54093
G01 X26.30009 Y50.57088
G01 X26.32369 Y50.59153
G01 X26.38312 Y50.64990
G01 X26.43946 Y50.71208
G01 X26.48815 Y50.76077
G01 X26.53240 Y50.80090
G01 X26.61711 Y50.86633
G01 X26.67362 Y50.90570
G01 X26.68434 Y50.91241
G01 X26.82087 Y50.98368
G01 X26.85191 Y50.99892
G01 X26.88460 Y51.01009
G01 X27.03154 Y51.05625
G01 X27.04388 Y51.05906
G01 X27.11170 Y51.07118
G01 X27.21774 Y51.08479
G01 X27.27751 Y51.08774
G01 X27.34632 Y51.08774
G01 X27.40611 Y51.08479
G01 X27.51213 Y51.07118
G01 X27.57997 Y51.05906
G01 X27.59232 Y51.05625
G01 X27.73926 Y51.01009
G01 X27.77195 Y50.99892
G01 X27.80298 Y50.98368
G01 X27.93951 Y50.91241
G01 X27.95023 Y50.90570
G01 X28.00677 Y50.86630
G01 X28.09138 Y50.80092
G01 X28.13570 Y50.76077
G01 X28.18434 Y50.71210
G01 X28.24073 Y50.64990
G01 X28.28022 Y50.60964
G01 X28.29973 Y50.59125
G01 X28.30293 Y50.58820
G01 X28.35376 Y50.53971
G01 X28.45023 Y50.46044
G01 X28.49684 Y50.42727
G01 X28.50590 Y50.42076
G01 X28.55282 Y50.38660
G01 X28.57029 Y50.38569
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.56194 Y50.36592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.56194 Y50.36592
G01 X28.55363 Y50.38599
G01 X28.50590 Y50.42076
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89394 Y55.17785 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89394 Y55.17785
G01 X26.89394 Y55.53221
G01 X26.89389 Y55.53246
G01 X26.89389 Y55.53251
G01 X26.89211 Y55.54448
G01 X26.88274 Y55.63932
G01 X26.87505 Y55.79616
G01 X26.87505 Y55.88849
G01 X26.88274 Y56.04531
G01 X26.89211 Y56.14013
G01 X26.89389 Y56.15209
G01 X26.93593 Y56.29070
G01 X26.97268 Y56.37945
G01 X27.02140 Y56.47059
G01 X27.02143 Y56.47061
G01 X27.08033 Y56.49969
G01 X27.16186 Y56.54681
G01 X27.22630 Y56.58801
G01 X27.27814 Y56.62466
G01 X27.29722 Y56.63861
G01 X27.35389 Y56.68138
G01 X27.36933 Y56.69339
G01 X27.47657 Y56.77909
G01 X27.51375 Y56.80686
G01 X27.53357 Y56.81793
G01 X27.67167 Y56.89220
G01 X27.68119 Y56.89723
G01 X27.73583 Y56.91742
G01 X27.86140 Y56.95801
G01 X27.88569 Y56.96370
G01 X27.95348 Y56.97610
G01 X28.04893 Y56.98877
G01 X28.10951 Y56.99174
G01 X28.17832 Y56.99174
G01 X28.23890 Y56.98877
G01 X28.33438 Y56.97610
G01 X28.40220 Y56.96370
G01 X28.42645 Y56.95801
G01 X28.55203 Y56.91742
G01 X28.60667 Y56.89723
G01 X28.61614 Y56.89223
G01 X28.75426 Y56.81796
G01 X28.77410 Y56.80688
G01 X28.81131 Y56.77909
G01 X28.88429 Y56.72072
G01 X28.92363 Y56.68928
G01 X28.93313 Y56.68034
G01 X28.98083 Y56.63061
G01 X29.06036 Y56.53914
G01 X29.08352 Y56.51199
G01 X29.13115 Y56.45895
G01 X29.13615 Y56.45347
G01 X29.17880 Y56.40688
G01 X29.24527 Y56.34214
G01 X29.31657 Y56.27996
G01 X29.36714 Y56.24041
G01 X29.39747 Y56.14061
G01 X29.41390 Y56.05771
G01 X29.41390 Y55.62670
G01 X29.39747 Y55.54399
G01 X29.36722 Y55.44435
G01 X29.35492 Y55.43475
G01 X29.31764 Y55.40437
G01 X29.24515 Y55.34260
G01 X29.14629 Y55.24283
G01 X29.13181 Y55.22535
G01 X29.08378 Y55.17247
G01 X29.06392 Y55.14961
G01 X28.98083 Y55.05405
G01 X28.93313 Y55.00432
G01 X28.92363 Y54.99535
G01 X28.81131 Y54.90556
G01 X28.77410 Y54.87778
G01 X28.75432 Y54.86673
G01 X28.65183 Y54.81161
G01 X28.61134 Y54.80148
G01 X28.54555 Y54.78834
G01 X28.38876 Y54.76510
G01 X28.32937 Y54.75924
G01 X28.17255 Y54.75154
G01 X28.11528 Y54.75154
G01 X27.95846 Y54.75924
G01 X27.89912 Y54.76510
G01 X27.74228 Y54.78834
G01 X27.67647 Y54.80148
G01 X27.63603 Y54.81161
G01 X27.53352 Y54.86675
G01 X27.51375 Y54.87778
G01 X27.47657 Y54.90554
G01 X27.40674 Y54.96137
G01 X27.36938 Y54.99121
G01 X27.35389 Y55.00328
G01 X27.30773 Y55.03813
G01 X27.29732 Y55.04613
G01 X27.27347 Y55.06480
G01 X27.16194 Y55.13790
G01 X27.07807 Y55.18375
G01 X27.07576 Y55.18502
G01 X27.02102 Y55.21476
G01 X27.01188 Y55.21397
G01 X26.91124 Y55.19472
G01 X26.90253 Y55.19104
G01 X26.89394 Y55.17785
G01 X26.80573 Y55.04232
G01 X26.79625 Y55.02291
G01 X26.76527 Y54.96523
G01 X26.70713 Y54.86696
G01 X26.68063 Y54.82553
G01 X26.66636 Y54.80991
G01 X26.40393 Y54.75083
G01 X24.80393 Y54.75083
G01 X24.54147 Y54.80988
G01 X24.52720 Y54.82553
G01 X24.49461 Y54.87747
G01 X24.48336 Y54.89807
G01 X24.45689 Y54.98413
G01 X24.45486 Y55.00163
G01 X24.45369 Y55.04232
G01 X24.45369 Y56.64231
G01 X24.45486 Y56.68303
G01 X24.45689 Y56.70053
G01 X24.48336 Y56.78661
G01 X24.52720 Y56.85910
G01 X24.58714 Y56.91905
G01 X24.65963 Y56.96289
G01 X24.74579 Y56.98936
G01 X24.76326 Y56.99141
G01 X24.80393 Y56.99258
G01 X26.40393 Y56.99258
G01 X26.44457 Y56.99141
G01 X26.46207 Y56.98936
G01 X26.54820 Y56.96289
G01 X26.61818 Y56.92080
G01 X26.62072 Y56.91905
G01 X26.68063 Y56.85913
G01 X26.70713 Y56.81770
G01 X26.74629 Y56.75148
G01 X26.76750 Y56.71310
G01 X26.80398 Y56.64231
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X27.02140 Y56.47059 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X27.02140 Y56.47059
G01 X27.01950 Y56.46965
G01 X26.95897 Y56.48044
G01 X26.90019 Y56.49741
G01 X26.89443 Y56.49964
G01 X26.89394 Y56.50038
G01 X26.80398 Y56.64231
G01 X26.89394 Y56.50041
G01 X26.89394 Y56.15243
G01 X26.89389 Y56.15209
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89389 Y55.53246 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89389 Y55.53246
G01 X26.93593 Y55.39393
G01 X26.97268 Y55.30518
G01 X27.02102 Y55.21476
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.41390 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.41390 Y55.62670
G01 X29.43041 Y55.54399
G01 X29.46066 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.36722 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.36722 Y55.44435
G01 X29.41560 Y55.44674
G01 X29.46066 Y55.44427
G01 X29.51136 Y55.40462
G01 X29.58251 Y55.34255
G01 X29.64903 Y55.27778
G01 X29.69168 Y55.23119
G01 X29.69663 Y55.22573
G01 X29.74431 Y55.17267
G01 X29.76747 Y55.14554
G01 X29.84700 Y55.05405
G01 X29.89472 Y55.00432
G01 X29.90422 Y54.99535
G01 X30.01657 Y54.90554
G01 X30.05375 Y54.87778
G01 X30.07352 Y54.86675
G01 X30.17603 Y54.81161
G01 X30.21647 Y54.80148
G01 X30.28228 Y54.78834
G01 X30.43912 Y54.76510
G01 X30.49846 Y54.75924
G01 X30.65528 Y54.75154
G01 X30.71255 Y54.75154
G01 X30.86937 Y54.75924
G01 X30.92876 Y54.76510
G01 X31.08555 Y54.78834
G01 X31.15134 Y54.80148
G01 X31.19183 Y54.81161
G01 X31.29432 Y54.86673
G01 X31.31410 Y54.87778
G01 X31.35131 Y54.90556
G01 X31.46363 Y54.99535
G01 X31.47313 Y55.00432
G01 X31.52083 Y55.05405
G01 X31.60392 Y55.14961
G01 X31.62378 Y55.17247
G01 X31.67181 Y55.22535
G01 X31.68629 Y55.24283
G01 X31.78515 Y55.34260
G01 X31.85764 Y55.40437
G01 X31.89492 Y55.43475
G01 X31.90722 Y55.44435
G01 X31.95560 Y55.44674
G01 X32.00066 Y55.44427
G01 X32.05136 Y55.40462
G01 X32.12251 Y55.34255
G01 X32.18903 Y55.27778
G01 X32.23168 Y55.23119
G01 X32.23663 Y55.22573
G01 X32.28431 Y55.17267
G01 X32.30747 Y55.14554
G01 X32.38700 Y55.05405
G01 X32.43472 Y55.00432
G01 X32.44422 Y54.99535
G01 X32.55657 Y54.90554
G01 X32.59375 Y54.87778
G01 X32.61352 Y54.86675
G01 X32.71603 Y54.81161
G01 X32.75647 Y54.80148
G01 X32.82228 Y54.78834
G01 X32.97912 Y54.76510
G01 X33.03846 Y54.75924
G01 X33.19528 Y54.75154
G01 X33.25255 Y54.75154
G01 X33.40937 Y54.75924
G01 X33.46876 Y54.76510
G01 X33.62555 Y54.78834
G01 X33.69134 Y54.80148
G01 X33.73183 Y54.81161
G01 X33.83432 Y54.86673
G01 X33.85410 Y54.87778
G01 X33.89131 Y54.90556
G01 X34.00363 Y54.99535
G01 X34.01313 Y55.00432
G01 X34.06083 Y55.05405
G01 X34.14392 Y55.14961
G01 X34.16378 Y55.17247
G01 X34.21181 Y55.22535
G01 X34.22629 Y55.24283
G01 X34.32515 Y55.34260
G01 X34.39764 Y55.40437
G01 X34.43492 Y55.43475
G01 X34.44722 Y55.44435
G01 X34.49560 Y55.44674
G01 X34.54066 Y55.44427
G01 X34.59136 Y55.40462
G01 X34.66251 Y55.34255
G01 X34.72903 Y55.27778
G01 X34.77168 Y55.23119
G01 X34.77663 Y55.22573
G01 X34.82431 Y55.17267
G01 X34.84747 Y55.14554
G01 X34.92700 Y55.05405
G01 X34.97472 Y55.00432
G01 X34.98422 Y54.99535
G01 X35.09657 Y54.90554
G01 X35.13375 Y54.87778
G01 X35.15352 Y54.86675
G01 X35.25603 Y54.81161
G01 X35.29647 Y54.80148
G01 X35.36228 Y54.78834
G01 X35.51912 Y54.76510
G01 X35.57846 Y54.75924
G01 X35.73528 Y54.75154
G01 X35.79255 Y54.75154
G01 X35.94937 Y54.75924
G01 X36.00876 Y54.76510
G01 X36.16555 Y54.78834
G01 X36.23134 Y54.80148
G01 X36.27183 Y54.81161
G01 X36.37432 Y54.86673
G01 X36.39410 Y54.87778
G01 X36.43131 Y54.90556
G01 X36.54363 Y54.99535
G01 X36.55313 Y55.00432
G01 X36.60083 Y55.05405
G01 X36.68392 Y55.14961
G01 X36.70378 Y55.17247
G01 X36.75181 Y55.22535
G01 X36.76629 Y55.24283
G01 X36.86515 Y55.34260
G01 X36.93764 Y55.40437
G01 X36.97492 Y55.43475
G01 X36.98722 Y55.44435
G01 X37.03560 Y55.44674
G01 X37.08066 Y55.44427
G01 X37.13136 Y55.40462
G01 X37.20251 Y55.34255
G01 X37.26903 Y55.27778
G01 X37.31168 Y55.23119
G01 X37.31663 Y55.22573
G01 X37.36431 Y55.17267
G01 X37.38747 Y55.14554
G01 X37.46700 Y55.05405
G01 X37.51472 Y55.00432
G01 X37.52422 Y54.99535
G01 X37.63657 Y54.90554
G01 X37.67375 Y54.87778
G01 X37.69352 Y54.86675
G01 X37.79603 Y54.81161
G01 X37.83647 Y54.80148
G01 X37.90228 Y54.78834
G01 X38.05912 Y54.76510
G01 X38.11846 Y54.75924
G01 X38.27528 Y54.75154
G01 X38.33255 Y54.75154
G01 X38.48937 Y54.75924
G01 X38.54876 Y54.76510
G01 X38.70555 Y54.78834
G01 X38.77134 Y54.80148
G01 X38.81183 Y54.81161
G01 X38.91432 Y54.86673
G01 X38.93410 Y54.87778
G01 X38.97131 Y54.90556
G01 X39.08363 Y54.99535
G01 X39.09313 Y55.00432
G01 X39.14083 Y55.05405
G01 X39.22392 Y55.14961
G01 X39.24378 Y55.17247
G01 X39.29181 Y55.22535
G01 X39.30629 Y55.24283
G01 X39.40515 Y55.34260
G01 X39.47764 Y55.40437
G01 X39.51492 Y55.43475
G01 X39.52722 Y55.44435
G01 X39.57560 Y55.44674
G01 X39.62066 Y55.44427
G01 X39.67136 Y55.40462
G01 X39.74251 Y55.34255
G01 X39.80903 Y55.27778
G01 X39.85168 Y55.23119
G01 X39.85663 Y55.22573
G01 X39.90431 Y55.17267
G01 X39.92747 Y55.14554
G01 X40.00700 Y55.05405
G01 X40.05472 Y55.00432
G01 X40.06422 Y54.99535
G01 X40.17657 Y54.90554
G01 X40.21375 Y54.87778
G01 X40.23352 Y54.86675
G01 X40.37164 Y54.79246
G01 X40.38122 Y54.78740
G01 X40.43588 Y54.76719
G01 X40.56140 Y54.72662
G01 X40.58574 Y54.72093
G01 X40.65348 Y54.70854
G01 X40.74891 Y54.69589
G01 X40.80951 Y54.69292
G01 X40.87832 Y54.69292
G01 X40.93892 Y54.69589
G01 X41.03438 Y54.70854
G01 X41.10214 Y54.72093
G01 X41.12645 Y54.72662
G01 X41.25198 Y54.76719
G01 X41.30664 Y54.78740
G01 X41.31619 Y54.79243
G01 X41.45432 Y54.86673
G01 X41.47410 Y54.87778
G01 X41.51131 Y54.90556
G01 X41.62363 Y54.99535
G01 X41.63313 Y55.00432
G01 X41.68083 Y55.05405
G01 X41.76392 Y55.14961
G01 X41.78378 Y55.17247
G01 X41.83181 Y55.22535
G01 X41.84629 Y55.24283
G01 X41.94515 Y55.34260
G01 X42.01764 Y55.40437
G01 X42.05492 Y55.43475
G01 X42.06722 Y55.44435
G01 X42.11560 Y55.44674
G01 X42.16066 Y55.44427
G01 X42.21136 Y55.40462
G01 X42.28251 Y55.34255
G01 X42.34903 Y55.27778
G01 X42.39168 Y55.23119
G01 X42.39663 Y55.22573
G01 X42.44431 Y55.17267
G01 X42.46747 Y55.14554
G01 X42.54700 Y55.05405
G01 X42.59472 Y55.00432
G01 X42.60422 Y54.99535
G01 X42.71657 Y54.90554
G01 X42.75375 Y54.87778
G01 X42.77352 Y54.86675
G01 X42.91164 Y54.79246
G01 X42.92122 Y54.78740
G01 X42.97588 Y54.76719
G01 X43.10140 Y54.72662
G01 X43.12574 Y54.72093
G01 X43.19348 Y54.70854
G01 X43.28891 Y54.69589
G01 X43.34951 Y54.69292
G01 X43.41832 Y54.69292
G01 X43.47892 Y54.69589
G01 X43.57438 Y54.70854
G01 X43.64214 Y54.72093
G01 X43.66645 Y54.72662
G01 X43.79198 Y54.76719
G01 X43.84664 Y54.78740
G01 X43.85619 Y54.79243
G01 X43.99432 Y54.86673
G01 X44.01410 Y54.87778
G01 X44.05131 Y54.90556
G01 X44.16361 Y54.99535
G01 X44.17313 Y55.00432
G01 X44.22083 Y55.05405
G01 X44.23066 Y55.06536
G01 X44.29180 Y55.13569
G01 X44.32065 Y55.17501
G01 X44.35858 Y55.23241
G01 X44.39558 Y55.29485
G01 X44.43244 Y55.37077
G01 X44.45947 Y55.43414
G01 X44.47224 Y55.46871
G01 X44.50442 Y55.58438
G01 X44.51961 Y55.65169
G01 X44.51982 Y55.65278
G01 X44.53386 Y55.80787
G01 X44.53615 Y55.84232
G01 X44.53386 Y55.87678
G01 X44.51979 Y56.03188
G01 X44.51961 Y56.03297
G01 X44.50442 Y56.10025
G01 X44.47224 Y56.21595
G01 X44.45947 Y56.25052
G01 X44.43244 Y56.31389
G01 X44.39558 Y56.38981
G01 X44.35858 Y56.45225
G01 X44.32065 Y56.50965
G01 X44.29180 Y56.54897
G01 X44.22083 Y56.63061
G01 X44.17313 Y56.68034
G01 X44.16363 Y56.68928
G01 X44.12429 Y56.72072
G01 X44.05131 Y56.77909
G01 X44.01410 Y56.80688
G01 X43.99426 Y56.81796
G01 X43.85614 Y56.89223
G01 X43.84667 Y56.89723
G01 X43.79203 Y56.91742
G01 X43.66645 Y56.95801
G01 X43.64220 Y56.96370
G01 X43.57438 Y56.97610
G01 X43.47890 Y56.98877
G01 X43.41832 Y56.99174
G01 X43.34951 Y56.99174
G01 X43.28893 Y56.98877
G01 X43.19348 Y56.97610
G01 X43.12569 Y56.96370
G01 X43.10140 Y56.95801
G01 X42.97583 Y56.91742
G01 X42.92119 Y56.89723
G01 X42.91167 Y56.89220
G01 X42.77357 Y56.81793
G01 X42.75375 Y56.80686
G01 X42.71657 Y56.77912
G01 X42.60422 Y56.68930
G01 X42.59472 Y56.68034
G01 X42.54700 Y56.63061
G01 X42.44408 Y56.51219
G01 X42.39574 Y56.45895
G01 X42.38147 Y56.44173
G01 X42.28266 Y56.34204
G01 X42.21027 Y56.28034
G01 X42.17291 Y56.24988
G01 X42.16064 Y56.24031
G01 X42.11223 Y56.23792
G01 X42.06714 Y56.24041
G01 X42.01657 Y56.27996
G01 X41.94527 Y56.34214
G01 X41.87880 Y56.40688
G01 X41.83615 Y56.45347
G01 X41.83115 Y56.45895
G01 X41.78352 Y56.51199
G01 X41.76036 Y56.53914
G01 X41.68083 Y56.63061
G01 X41.63313 Y56.68034
G01 X41.62363 Y56.68928
G01 X41.58429 Y56.72072
G01 X41.51131 Y56.77909
G01 X41.47410 Y56.80688
G01 X41.45426 Y56.81796
G01 X41.31614 Y56.89223
G01 X41.30667 Y56.89723
G01 X41.25203 Y56.91742
G01 X41.12645 Y56.95801
G01 X41.10220 Y56.96370
G01 X41.03438 Y56.97610
G01 X40.93890 Y56.98877
G01 X40.87832 Y56.99174
G01 X40.80951 Y56.99174
G01 X40.74893 Y56.98877
G01 X40.65348 Y56.97610
G01 X40.58569 Y56.96370
G01 X40.56140 Y56.95801
G01 X40.43583 Y56.91742
G01 X40.38119 Y56.89723
G01 X40.37167 Y56.89220
G01 X40.23357 Y56.81793
G01 X40.21375 Y56.80686
G01 X40.17657 Y56.77912
G01 X40.06422 Y56.68930
G01 X40.05472 Y56.68034
G01 X40.00700 Y56.63061
G01 X39.90408 Y56.51219
G01 X39.85574 Y56.45895
G01 X39.84147 Y56.44173
G01 X39.74266 Y56.34204
G01 X39.67027 Y56.28034
G01 X39.63291 Y56.24988
G01 X39.62064 Y56.24031
G01 X39.57223 Y56.23792
G01 X39.52714 Y56.24041
G01 X39.47657 Y56.27996
G01 X39.40527 Y56.34214
G01 X39.33880 Y56.40688
G01 X39.29615 Y56.45347
G01 X39.29115 Y56.45895
G01 X39.24352 Y56.51199
G01 X39.22036 Y56.53914
G01 X39.14083 Y56.63061
G01 X39.09313 Y56.68034
G01 X39.08363 Y56.68928
G01 X39.04429 Y56.72072
G01 X38.97131 Y56.77909
G01 X38.93410 Y56.80688
G01 X38.91426 Y56.81796
G01 X38.77614 Y56.89223
G01 X38.76667 Y56.89723
G01 X38.71203 Y56.91742
G01 X38.58645 Y56.95801
G01 X38.56220 Y56.96370
G01 X38.49438 Y56.97610
G01 X38.39890 Y56.98877
G01 X38.33832 Y56.99174
G01 X38.26951 Y56.99174
G01 X38.20893 Y56.98877
G01 X38.11348 Y56.97610
G01 X38.04569 Y56.96370
G01 X38.02140 Y56.95801
G01 X37.89583 Y56.91742
G01 X37.84119 Y56.89723
G01 X37.83167 Y56.89220
G01 X37.69357 Y56.81793
G01 X37.67375 Y56.80686
G01 X37.63657 Y56.77912
G01 X37.52422 Y56.68930
G01 X37.51472 Y56.68034
G01 X37.46700 Y56.63061
G01 X37.36408 Y56.51219
G01 X37.31574 Y56.45895
G01 X37.30147 Y56.44173
G01 X37.20266 Y56.34204
G01 X37.13027 Y56.28034
G01 X37.09291 Y56.24988
G01 X37.08064 Y56.24031
G01 X37.03223 Y56.23792
G01 X36.98714 Y56.24041
G01 X36.93657 Y56.27996
G01 X36.86527 Y56.34214
G01 X36.79880 Y56.40688
G01 X36.75615 Y56.45347
G01 X36.75115 Y56.45895
G01 X36.70352 Y56.51199
G01 X36.68036 Y56.53914
G01 X36.60083 Y56.63061
G01 X36.55313 Y56.68034
G01 X36.54363 Y56.68928
G01 X36.50429 Y56.72072
G01 X36.43131 Y56.77909
G01 X36.39410 Y56.80688
G01 X36.37426 Y56.81796
G01 X36.23614 Y56.89223
G01 X36.22667 Y56.89723
G01 X36.17203 Y56.91742
G01 X36.04645 Y56.95801
G01 X36.02220 Y56.96370
G01 X35.95438 Y56.97610
G01 X35.85890 Y56.98877
G01 X35.79832 Y56.99174
G01 X35.72951 Y56.99174
G01 X35.66893 Y56.98877
G01 X35.57348 Y56.97610
G01 X35.50569 Y56.96370
G01 X35.48140 Y56.95801
G01 X35.35583 Y56.91742
G01 X35.30119 Y56.89723
G01 X35.29167 Y56.89220
G01 X35.15357 Y56.81793
G01 X35.13375 Y56.80686
G01 X35.09657 Y56.77912
G01 X34.98422 Y56.68930
G01 X34.97472 Y56.68034
G01 X34.92700 Y56.63061
G01 X34.82408 Y56.51219
G01 X34.77574 Y56.45895
G01 X34.76147 Y56.44173
G01 X34.66266 Y56.34204
G01 X34.59027 Y56.28034
G01 X34.55291 Y56.24988
G01 X34.54064 Y56.24031
G01 X34.49223 Y56.23792
G01 X34.44714 Y56.24041
G01 X34.39657 Y56.27996
G01 X34.32527 Y56.34214
G01 X34.25880 Y56.40688
G01 X34.21615 Y56.45347
G01 X34.21115 Y56.45895
G01 X34.16352 Y56.51199
G01 X34.14036 Y56.53914
G01 X34.06083 Y56.63061
G01 X34.01313 Y56.68034
G01 X34.00363 Y56.68928
G01 X33.96429 Y56.72072
G01 X33.89131 Y56.77909
G01 X33.85410 Y56.80688
G01 X33.83426 Y56.81796
G01 X33.69614 Y56.89223
G01 X33.68667 Y56.89723
G01 X33.63203 Y56.91742
G01 X33.50645 Y56.95801
G01 X33.48220 Y56.96370
G01 X33.41438 Y56.97610
G01 X33.31890 Y56.98877
G01 X33.25832 Y56.99174
G01 X33.18951 Y56.99174
G01 X33.12893 Y56.98877
G01 X33.03348 Y56.97610
G01 X32.96569 Y56.96370
G01 X32.94140 Y56.95801
G01 X32.81583 Y56.91742
G01 X32.76119 Y56.89723
G01 X32.75167 Y56.89220
G01 X32.61357 Y56.81793
G01 X32.59375 Y56.80686
G01 X32.55657 Y56.77912
G01 X32.44422 Y56.68930
G01 X32.43472 Y56.68034
G01 X32.38700 Y56.63061
G01 X32.28408 Y56.51219
G01 X32.23574 Y56.45895
G01 X32.22147 Y56.44173
G01 X32.12266 Y56.34204
G01 X32.05027 Y56.28034
G01 X32.01291 Y56.24988
G01 X32.00064 Y56.24031
G01 X31.95223 Y56.23792
G01 X31.90714 Y56.24041
G01 X31.85657 Y56.27996
G01 X31.78527 Y56.34214
G01 X31.71880 Y56.40688
G01 X31.67615 Y56.45347
G01 X31.67115 Y56.45895
G01 X31.62352 Y56.51199
G01 X31.60036 Y56.53914
G01 X31.52083 Y56.63061
G01 X31.47313 Y56.68034
G01 X31.46363 Y56.68928
G01 X31.42429 Y56.72072
G01 X31.35131 Y56.77909
G01 X31.31410 Y56.80688
G01 X31.29426 Y56.81796
G01 X31.15614 Y56.89223
G01 X31.14667 Y56.89723
G01 X31.09203 Y56.91742
G01 X30.96645 Y56.95801
G01 X30.94220 Y56.96370
G01 X30.87438 Y56.97610
G01 X30.77890 Y56.98877
G01 X30.71832 Y56.99174
G01 X30.64951 Y56.99174
G01 X30.58893 Y56.98877
G01 X30.49348 Y56.97610
G01 X30.42569 Y56.96370
G01 X30.40140 Y56.95801
G01 X30.27583 Y56.91742
G01 X30.22119 Y56.89723
G01 X30.21167 Y56.89220
G01 X30.07357 Y56.81793
G01 X30.05375 Y56.80686
G01 X30.01657 Y56.77912
G01 X29.90422 Y56.68930
G01 X29.89472 Y56.68034
G01 X29.84700 Y56.63061
G01 X29.74408 Y56.51219
G01 X29.69574 Y56.45895
G01 X29.68147 Y56.44173
G01 X29.58266 Y56.34204
G01 X29.51027 Y56.28034
G01 X29.47291 Y56.24988
G01 X29.46064 Y56.24031
G01 X29.41223 Y56.23792
G01 X29.36714 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.46064 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.46064 Y56.24031
G01 X29.43041 Y56.14061
G01 X29.41390 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.95393 Y55.62670 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.95393 Y55.62670
G01 X31.97041 Y55.54399
G01 X32.00066 Y55.44427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.90722 Y55.44435 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.90722 Y55.44435
G01 X31.93747 Y55.54399
G01 X31.95393 Y55.62670
G01 X31.95393 Y56.05771
G01 X31.93747 Y56.14061
G01 X31.90714 Y56.24041
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.00064 Y56.24031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.00064 Y56.24031
G01 X31.97041 Y56.14061
G01 X31.95393 Y56.05771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.77972 Y59.10233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.77972 Y59.10233
G01 X28.78198 Y59.13677
G01 X28.79605 Y59.29187
G01 X28.79623 Y59.29296
G01 X28.81144 Y59.36027
G01 X28.84360 Y59.47591
G01 X28.85637 Y59.51051
G01 X28.88337 Y59.57386
G01 X28.92025 Y59.64980
G01 X28.95724 Y59.71224
G01 X28.99521 Y59.76969
G01 X29.02404 Y59.80898
G01 X29.08086 Y59.87431
G01 X29.09503 Y59.89062
G01 X29.14273 Y59.94033
G01 X29.15223 Y59.94929
G01 X29.26458 Y60.03911
G01 X29.30176 Y60.06687
G01 X29.32152 Y60.07789
G01 X29.45965 Y60.15219
G01 X29.46920 Y60.15724
G01 X29.52386 Y60.17746
G01 X29.64939 Y60.21803
G01 X29.67369 Y60.22371
G01 X29.74146 Y60.23611
G01 X29.83691 Y60.24876
G01 X29.89752 Y60.25173
G01 X29.96633 Y60.25173
G01 X30.02693 Y60.24876
G01 X30.12238 Y60.23611
G01 X30.19015 Y60.22371
G01 X30.21446 Y60.21803
G01 X30.33999 Y60.17746
G01 X30.39465 Y60.15724
G01 X30.40420 Y60.15219
G01 X30.54232 Y60.07789
G01 X30.56208 Y60.06687
G01 X30.59927 Y60.03911
G01 X30.63359 Y60.01168
G01 X30.71161 Y59.94932
G01 X30.72111 Y59.94033
G01 X30.76881 Y59.89062
G01 X30.83981 Y59.80896
G01 X30.86864 Y59.76969
G01 X30.90661 Y59.71224
G01 X30.94359 Y59.64980
G01 X30.98047 Y59.57386
G01 X31.00747 Y59.51051
G01 X31.02025 Y59.47596
G01 X31.05243 Y59.36027
G01 X31.06762 Y59.29296
G01 X31.06780 Y59.29189
G01 X31.08187 Y59.13677
G01 X31.08413 Y59.10233
G01 X31.08187 Y59.06786
G01 X31.06780 Y58.91277
G01 X31.06762 Y58.91170
G01 X31.05243 Y58.84439
G01 X31.02025 Y58.72870
G01 X31.00747 Y58.69413
G01 X30.98045 Y58.63075
G01 X30.94359 Y58.55483
G01 X30.90658 Y58.49240
G01 X30.86866 Y58.43500
G01 X30.83983 Y58.39570
G01 X30.76884 Y58.31404
G01 X30.72109 Y58.26431
G01 X30.71161 Y58.25534
G01 X30.59927 Y58.16553
G01 X30.56208 Y58.13779
G01 X30.54227 Y58.12672
G01 X30.40417 Y58.05245
G01 X30.39465 Y58.04742
G01 X30.34004 Y58.02722
G01 X30.21446 Y57.98664
G01 X30.19020 Y57.98095
G01 X30.12238 Y57.96855
G01 X30.02691 Y57.95588
G01 X29.96633 Y57.95290
G01 X29.89752 Y57.95290
G01 X29.83694 Y57.95588
G01 X29.74146 Y57.96855
G01 X29.67364 Y57.98095
G01 X29.64939 Y57.98664
G01 X29.52381 Y58.02722
G01 X29.46910 Y58.04747
G01 X29.45967 Y58.05245
G01 X29.32157 Y58.12672
G01 X29.30174 Y58.13779
G01 X29.26458 Y58.16553
G01 X29.15223 Y58.25534
G01 X29.14276 Y58.26431
G01 X29.09501 Y58.31404
G01 X29.02401 Y58.39570
G01 X28.99518 Y58.43500
G01 X28.95726 Y58.49240
G01 X28.92028 Y58.55483
G01 X28.88340 Y58.63075
G01 X28.85637 Y58.69415
G01 X28.84360 Y58.72870
G01 X28.81141 Y58.84439
G01 X28.79623 Y58.91170
G01 X28.79605 Y58.91280
G01 X28.78198 Y59.06786
G01 X28.77972 Y59.10233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.33572 Y59.10233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.33572 Y59.10233
G01 X32.33798 Y59.13677
G01 X32.35205 Y59.29187
G01 X32.35223 Y59.29296
G01 X32.36744 Y59.36027
G01 X32.39960 Y59.47591
G01 X32.41237 Y59.51051
G01 X32.43937 Y59.57386
G01 X32.47625 Y59.64980
G01 X32.51324 Y59.71224
G01 X32.55121 Y59.76969
G01 X32.58004 Y59.80898
G01 X32.63686 Y59.87431
G01 X32.65103 Y59.89062
G01 X32.69873 Y59.94033
G01 X32.70823 Y59.94929
G01 X32.82058 Y60.03911
G01 X32.85776 Y60.06687
G01 X32.87752 Y60.07789
G01 X33.01565 Y60.15219
G01 X33.02520 Y60.15724
G01 X33.07986 Y60.17746
G01 X33.20539 Y60.21803
G01 X33.22969 Y60.22371
G01 X33.29746 Y60.23611
G01 X33.39291 Y60.24876
G01 X33.45352 Y60.25173
G01 X33.52233 Y60.25173
G01 X33.58293 Y60.24876
G01 X33.67838 Y60.23611
G01 X33.74615 Y60.22371
G01 X33.77046 Y60.21803
G01 X33.89599 Y60.17746
G01 X33.95065 Y60.15724
G01 X33.96020 Y60.15219
G01 X34.09832 Y60.07789
G01 X34.11808 Y60.06687
G01 X34.15527 Y60.03911
G01 X34.18959 Y60.01168
G01 X34.26761 Y59.94932
G01 X34.27711 Y59.94033
G01 X34.32481 Y59.89062
G01 X34.39581 Y59.80896
G01 X34.42464 Y59.76969
G01 X34.46261 Y59.71224
G01 X34.49959 Y59.64980
G01 X34.53647 Y59.57386
G01 X34.56347 Y59.51051
G01 X34.57625 Y59.47596
G01 X34.60843 Y59.36027
G01 X34.62362 Y59.29296
G01 X34.62380 Y59.29189
G01 X34.63787 Y59.13677
G01 X34.64013 Y59.10233
G01 X34.63787 Y59.06786
G01 X34.62380 Y58.91277
G01 X34.62362 Y58.91170
G01 X34.60843 Y58.84439
G01 X34.57625 Y58.72870
G01 X34.56347 Y58.69413
G01 X34.53645 Y58.63075
G01 X34.49959 Y58.55483
G01 X34.46258 Y58.49240
G01 X34.42466 Y58.43500
G01 X34.39583 Y58.39570
G01 X34.32484 Y58.31404
G01 X34.27709 Y58.26431
G01 X34.26761 Y58.25534
G01 X34.15527 Y58.16553
G01 X34.11811 Y58.13779
G01 X34.10267 Y58.12908
G01 X33.96017 Y58.05245
G01 X33.95065 Y58.04742
G01 X33.89604 Y58.02722
G01 X33.77046 Y57.98664
G01 X33.74620 Y57.98095
G01 X33.67838 Y57.96855
G01 X33.58291 Y57.95588
G01 X33.52233 Y57.95290
G01 X33.45352 Y57.95290
G01 X33.39294 Y57.95588
G01 X33.29746 Y57.96855
G01 X33.22964 Y57.98095
G01 X33.20539 Y57.98664
G01 X33.07981 Y58.02722
G01 X33.02510 Y58.04747
G01 X33.01567 Y58.05245
G01 X32.87757 Y58.12672
G01 X32.85774 Y58.13779
G01 X32.82058 Y58.16553
G01 X32.70823 Y58.25534
G01 X32.69876 Y58.26431
G01 X32.65101 Y58.31404
G01 X32.58001 Y58.39570
G01 X32.55118 Y58.43500
G01 X32.51326 Y58.49240
G01 X32.47628 Y58.55483
G01 X32.43940 Y58.63075
G01 X32.41237 Y58.69415
G01 X32.39960 Y58.72870
G01 X32.36741 Y58.84439
G01 X32.35223 Y58.91170
G01 X32.35205 Y58.91280
G01 X32.33798 Y59.06786
G01 X32.33572 Y59.10233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.89172 Y59.43832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.89172 Y59.43832
G01 X35.89398 Y59.47279
G01 X35.90805 Y59.62786
G01 X35.90823 Y59.62895
G01 X35.92341 Y59.69626
G01 X35.95562 Y59.81198
G01 X35.96837 Y59.84650
G01 X35.99540 Y59.90990
G01 X36.02499 Y59.97083
G01 X36.03225 Y59.98577
G01 X36.06926 Y60.04825
G01 X36.10718 Y60.10563
G01 X36.13604 Y60.14495
G01 X36.17035 Y60.18442
G01 X36.20701 Y60.22661
G01 X36.25476 Y60.27634
G01 X36.26423 Y60.28531
G01 X36.37658 Y60.37512
G01 X36.41376 Y60.40289
G01 X36.43357 Y60.41394
G01 X36.57167 Y60.48821
G01 X36.58117 Y60.49323
G01 X36.63581 Y60.51343
G01 X36.76139 Y60.55402
G01 X36.78564 Y60.55971
G01 X36.85346 Y60.57210
G01 X36.94891 Y60.58475
G01 X37.00952 Y60.58772
G01 X37.07833 Y60.58772
G01 X37.13893 Y60.58475
G01 X37.23438 Y60.57210
G01 X37.30220 Y60.55971
G01 X37.32646 Y60.55402
G01 X37.45204 Y60.51343
G01 X37.50665 Y60.49323
G01 X37.51617 Y60.48821
G01 X37.65427 Y60.41394
G01 X37.66812 Y60.40629
G01 X37.67416 Y60.40281
G01 X37.71127 Y60.37512
G01 X37.82361 Y60.28531
G01 X37.83309 Y60.27634
G01 X37.88084 Y60.22661
G01 X37.95183 Y60.14495
G01 X37.98066 Y60.10566
G01 X38.01858 Y60.04825
G01 X38.05559 Y59.98582
G01 X38.09245 Y59.90990
G01 X38.11947 Y59.84652
G01 X38.13225 Y59.81196
G01 X38.16443 Y59.69626
G01 X38.17962 Y59.62895
G01 X38.17980 Y59.62786
G01 X38.19387 Y59.47279
G01 X38.19560 Y59.44929
G01 X38.19613 Y59.43837
G01 X38.19387 Y59.40388
G01 X38.17980 Y59.24876
G01 X38.17962 Y59.24769
G01 X38.16443 Y59.18038
G01 X38.13225 Y59.06469
G01 X38.11947 Y59.03014
G01 X38.09247 Y58.96680
G01 X38.05559 Y58.89085
G01 X38.01861 Y58.82842
G01 X37.98064 Y58.77096
G01 X37.95181 Y58.73169
G01 X37.88081 Y58.65003
G01 X37.83311 Y58.60032
G01 X37.82361 Y58.59133
G01 X37.71127 Y58.50154
G01 X37.67408 Y58.47381
G01 X37.65432 Y58.46276
G01 X37.51620 Y58.38846
G01 X37.50665 Y58.38341
G01 X37.45199 Y58.36319
G01 X37.32646 Y58.32263
G01 X37.30215 Y58.31694
G01 X37.23438 Y58.30454
G01 X37.13893 Y58.29189
G01 X37.07833 Y58.28892
G01 X37.00952 Y58.28892
G01 X36.94891 Y58.29189
G01 X36.85346 Y58.30454
G01 X36.78569 Y58.31694
G01 X36.76139 Y58.32263
G01 X36.63586 Y58.36319
G01 X36.58120 Y58.38341
G01 X36.57165 Y58.38846
G01 X36.43352 Y58.46276
G01 X36.41376 Y58.47381
G01 X36.37658 Y58.50154
G01 X36.26423 Y58.59133
G01 X36.25473 Y58.60032
G01 X36.20703 Y58.65003
G01 X36.13604 Y58.73169
G01 X36.10721 Y58.77096
G01 X36.06924 Y58.82842
G01 X36.03225 Y58.89085
G01 X35.99537 Y58.96680
G01 X35.96837 Y59.03014
G01 X35.95560 Y59.06471
G01 X35.92341 Y59.18038
G01 X35.91562 Y59.21112
G01 X35.90823 Y59.24769
G01 X35.90805 Y59.24876
G01 X35.89398 Y59.40388
G01 X35.89172 Y59.43832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.70172 Y59.47833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.70172 Y59.47833
G01 X39.70398 Y59.51277
G01 X39.71805 Y59.66786
G01 X39.71823 Y59.66895
G01 X39.73344 Y59.73626
G01 X39.76415 Y59.84668
G01 X39.76560 Y59.85191
G01 X39.77837 Y59.88650
G01 X39.80537 Y59.94985
G01 X39.83598 Y60.01287
G01 X39.84223 Y60.02575
G01 X39.87924 Y60.08823
G01 X39.91718 Y60.14564
G01 X39.94604 Y60.18495
G01 X40.01701 Y60.26662
G01 X40.06478 Y60.31637
G01 X40.07423 Y60.32531
G01 X40.18660 Y60.41513
G01 X40.22376 Y60.44287
G01 X40.24352 Y60.45389
G01 X40.38165 Y60.52818
G01 X40.39120 Y60.53324
G01 X40.44586 Y60.55346
G01 X40.57139 Y60.59402
G01 X40.59569 Y60.59971
G01 X40.66341 Y60.61208
G01 X40.75891 Y60.62476
G01 X40.81947 Y60.62773
G01 X40.88838 Y60.62773
G01 X40.94893 Y60.62476
G01 X41.04444 Y60.61208
G01 X41.11215 Y60.59971
G01 X41.13646 Y60.59402
G01 X41.26199 Y60.55346
G01 X41.31660 Y60.53326
G01 X41.32198 Y60.53045
G01 X41.32620 Y60.52818
G01 X41.46432 Y60.45389
G01 X41.48408 Y60.44284
G01 X41.52124 Y60.41513
G01 X41.63361 Y60.32531
G01 X41.64306 Y60.31637
G01 X41.69084 Y60.26662
G01 X41.76181 Y60.18495
G01 X41.79066 Y60.14564
G01 X41.82861 Y60.08823
G01 X41.86559 Y60.02580
G01 X41.90247 Y59.94985
G01 X41.92947 Y59.88650
G01 X41.94225 Y59.85196
G01 X41.97443 Y59.73626
G01 X41.98962 Y59.66895
G01 X41.98980 Y59.66789
G01 X42.00387 Y59.51277
G01 X42.00613 Y59.47833
G01 X42.00387 Y59.44386
G01 X41.98980 Y59.28877
G01 X41.98962 Y59.28770
G01 X41.97443 Y59.22039
G01 X41.94225 Y59.10469
G01 X41.92947 Y59.07012
G01 X41.90245 Y59.00675
G01 X41.86559 Y58.93085
G01 X41.82858 Y58.86840
G01 X41.79066 Y58.81102
G01 X41.76181 Y58.77170
G01 X41.69084 Y58.69004
G01 X41.64309 Y58.64030
G01 X41.63361 Y58.63134
G01 X41.52127 Y58.54152
G01 X41.48408 Y58.51379
G01 X41.46427 Y58.50271
G01 X41.32617 Y58.42844
G01 X41.31665 Y58.42341
G01 X41.26199 Y58.40320
G01 X41.13646 Y58.36263
G01 X41.11215 Y58.35694
G01 X41.04444 Y58.34457
G01 X40.94893 Y58.33190
G01 X40.88838 Y58.32893
G01 X40.81947 Y58.32893
G01 X40.75891 Y58.33190
G01 X40.66341 Y58.34457
G01 X40.59569 Y58.35694
G01 X40.57139 Y58.36263
G01 X40.44586 Y58.40320
G01 X40.39117 Y58.42341
G01 X40.38167 Y58.42844
G01 X40.37248 Y58.43337
G01 X40.24357 Y58.50271
G01 X40.22374 Y58.51379
G01 X40.18658 Y58.54152
G01 X40.07423 Y58.63134
G01 X40.06476 Y58.64030
G01 X40.01701 Y58.69004
G01 X39.94604 Y58.77170
G01 X39.91718 Y58.81102
G01 X39.87926 Y58.86840
G01 X39.84225 Y58.93085
G01 X39.80540 Y59.00675
G01 X39.77837 Y59.07015
G01 X39.76560 Y59.10469
G01 X39.73341 Y59.22039
G01 X39.71823 Y59.28770
G01 X39.71805 Y59.28879
G01 X39.70398 Y59.44386
G01 X39.70172 Y59.47833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.70172 Y64.47834 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.70172 Y64.47834
G01 X39.70398 Y64.51278
G01 X39.71805 Y64.66788
G01 X39.71823 Y64.66897
G01 X39.73341 Y64.73625
G01 X39.76562 Y64.85198
G01 X39.77837 Y64.88649
G01 X39.80540 Y64.94989
G01 X39.84228 Y65.02581
G01 X39.87926 Y65.08825
G01 X39.91718 Y65.14565
G01 X39.94601 Y65.18494
G01 X40.01701 Y65.26661
G01 X40.05508 Y65.30704
G01 X40.06476 Y65.31634
G01 X40.07428 Y65.32536
G01 X40.18658 Y65.41512
G01 X40.22374 Y65.44286
G01 X40.24357 Y65.45393
G01 X40.38167 Y65.52820
G01 X40.39117 Y65.53323
G01 X40.44581 Y65.55342
G01 X40.57139 Y65.59401
G01 X40.59564 Y65.59970
G01 X40.66346 Y65.61210
G01 X40.75894 Y65.62477
G01 X40.81952 Y65.62774
G01 X40.88833 Y65.62774
G01 X40.94891 Y65.62477
G01 X41.04438 Y65.61210
G01 X41.11220 Y65.59970
G01 X41.13646 Y65.59401
G01 X41.26204 Y65.55342
G01 X41.31667 Y65.53323
G01 X41.32617 Y65.52820
G01 X41.46427 Y65.45393
G01 X41.48408 Y65.44286
G01 X41.52127 Y65.41512
G01 X41.60735 Y65.34631
G01 X41.63361 Y65.32531
G01 X41.64311 Y65.31634
G01 X41.69084 Y65.26661
G01 X41.76181 Y65.18497
G01 X41.79066 Y65.14565
G01 X41.82858 Y65.08825
G01 X41.86559 Y65.02581
G01 X41.90245 Y64.94989
G01 X41.92947 Y64.88652
G01 X41.94225 Y64.85195
G01 X41.97443 Y64.73625
G01 X41.98962 Y64.66897
G01 X41.98980 Y64.66790
G01 X42.00387 Y64.51278
G01 X42.00613 Y64.47834
G01 X42.00387 Y64.44387
G01 X41.98980 Y64.28876
G01 X41.98962 Y64.28769
G01 X41.97443 Y64.22038
G01 X41.94225 Y64.10471
G01 X41.92947 Y64.07014
G01 X41.90245 Y64.00677
G01 X41.86559 Y63.93084
G01 X41.82858 Y63.86841
G01 X41.79066 Y63.81101
G01 X41.76181 Y63.77169
G01 X41.69084 Y63.69005
G01 X41.64311 Y63.64032
G01 X41.63361 Y63.63133
G01 X41.52127 Y63.54154
G01 X41.48408 Y63.51380
G01 X41.46432 Y63.50275
G01 X41.32620 Y63.42846
G01 X41.31665 Y63.42340
G01 X41.26199 Y63.40319
G01 X41.13646 Y63.36262
G01 X41.11215 Y63.35693
G01 X41.04438 Y63.34454
G01 X40.94893 Y63.33189
G01 X40.88833 Y63.32892
G01 X40.81952 Y63.32892
G01 X40.75891 Y63.33189
G01 X40.66346 Y63.34454
G01 X40.59569 Y63.35693
G01 X40.57139 Y63.36262
G01 X40.44586 Y63.40319
G01 X40.39120 Y63.42340
G01 X40.38165 Y63.42846
G01 X40.24352 Y63.50275
G01 X40.22376 Y63.51380
G01 X40.18658 Y63.54154
G01 X40.07423 Y63.63133
G01 X40.06473 Y63.64032
G01 X40.01701 Y63.69005
G01 X39.94604 Y63.77169
G01 X39.91718 Y63.81101
G01 X39.87926 Y63.86841
G01 X39.84228 Y63.93084
G01 X39.80540 Y64.00677
G01 X39.77837 Y64.07014
G01 X39.76560 Y64.10471
G01 X39.73344 Y64.22038
G01 X39.71823 Y64.28769
G01 X39.71805 Y64.28878
G01 X39.70398 Y64.44387
G01 X39.70172 Y64.47834
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.89172 Y64.43834 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.89172 Y64.43834
G01 X35.89398 Y64.40387
G01 X35.90805 Y64.24878
G01 X35.90823 Y64.24768
G01 X35.92123 Y64.18848
G01 X35.92344 Y64.18037
G01 X35.95560 Y64.06470
G01 X35.96837 Y64.03013
G01 X35.99540 Y63.96676
G01 X36.03228 Y63.89084
G01 X36.06926 Y63.82841
G01 X36.10718 Y63.77100
G01 X36.13604 Y63.73168
G01 X36.20701 Y63.65005
G01 X36.25473 Y63.60031
G01 X36.26423 Y63.59132
G01 X36.37658 Y63.50153
G01 X36.41376 Y63.47380
G01 X36.43352 Y63.46275
G01 X36.57165 Y63.38845
G01 X36.58120 Y63.38340
G01 X36.63586 Y63.36321
G01 X36.76139 Y63.32264
G01 X36.78569 Y63.31695
G01 X36.85346 Y63.30456
G01 X36.94894 Y63.29188
G01 X37.00952 Y63.28891
G01 X37.07833 Y63.28891
G01 X37.13891 Y63.29188
G01 X37.23438 Y63.30456
G01 X37.30215 Y63.31695
G01 X37.32646 Y63.32264
G01 X37.45199 Y63.36321
G01 X37.50665 Y63.38340
G01 X37.51620 Y63.38845
G01 X37.65432 Y63.46275
G01 X37.67408 Y63.47380
G01 X37.71127 Y63.50153
G01 X37.82361 Y63.59132
G01 X37.83311 Y63.60031
G01 X37.88084 Y63.65005
G01 X37.95181 Y63.73168
G01 X37.98066 Y63.77100
G01 X38.01858 Y63.82841
G01 X38.05559 Y63.89084
G01 X38.09245 Y63.96676
G01 X38.11947 Y64.03013
G01 X38.13225 Y64.06470
G01 X38.16443 Y64.18037
G01 X38.17962 Y64.24768
G01 X38.17980 Y64.24875
G01 X38.19387 Y64.40387
G01 X38.19613 Y64.43836
G01 X38.19560 Y64.44934
G01 X38.19387 Y64.47278
G01 X38.17980 Y64.62787
G01 X38.17962 Y64.62896
G01 X38.16443 Y64.69627
G01 X38.13225 Y64.81195
G01 X38.11947 Y64.84651
G01 X38.09245 Y64.90989
G01 X38.05559 Y64.98581
G01 X38.01858 Y65.04824
G01 X37.98066 Y65.10565
G01 X37.95181 Y65.14496
G01 X37.88084 Y65.22660
G01 X37.83311 Y65.27633
G01 X37.82361 Y65.28533
G01 X37.71127 Y65.37511
G01 X37.67408 Y65.40288
G01 X37.65432 Y65.41390
G01 X37.51620 Y65.48820
G01 X37.50665 Y65.49325
G01 X37.45199 Y65.51347
G01 X37.32646 Y65.55403
G01 X37.30215 Y65.55972
G01 X37.23438 Y65.57212
G01 X37.13893 Y65.58477
G01 X37.07833 Y65.58774
G01 X37.00952 Y65.58774
G01 X36.94891 Y65.58477
G01 X36.85346 Y65.57212
G01 X36.78569 Y65.55972
G01 X36.76139 Y65.55403
G01 X36.63586 Y65.51347
G01 X36.58120 Y65.49325
G01 X36.57165 Y65.48820
G01 X36.43352 Y65.41390
G01 X36.41376 Y65.40288
G01 X36.37658 Y65.37511
G01 X36.26423 Y65.28530
G01 X36.25473 Y65.27633
G01 X36.20701 Y65.22660
G01 X36.13604 Y65.14496
G01 X36.10718 Y65.10565
G01 X36.06926 Y65.04824
G01 X36.03228 Y64.98583
G01 X35.99540 Y64.90989
G01 X35.96837 Y64.84651
G01 X35.95562 Y64.81200
G01 X35.92344 Y64.69627
G01 X35.90823 Y64.62896
G01 X35.90805 Y64.62787
G01 X35.89398 Y64.47278
G01 X35.89172 Y64.43834
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.33572 Y64.10232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.33572 Y64.10232
G01 X32.33798 Y64.06788
G01 X32.35205 Y63.91276
G01 X32.35223 Y63.91169
G01 X32.35784 Y63.88304
G01 X32.36744 Y63.84438
G01 X32.39960 Y63.72871
G01 X32.41237 Y63.69414
G01 X32.43937 Y63.63079
G01 X32.47625 Y63.55485
G01 X32.51324 Y63.49242
G01 X32.55121 Y63.43496
G01 X32.58004 Y63.39569
G01 X32.65103 Y63.31403
G01 X32.69873 Y63.26432
G01 X32.70823 Y63.25533
G01 X32.82058 Y63.16554
G01 X32.85776 Y63.13781
G01 X32.87752 Y63.12676
G01 X33.01565 Y63.05246
G01 X33.02520 Y63.04741
G01 X33.07986 Y63.02719
G01 X33.20539 Y62.98663
G01 X33.22969 Y62.98094
G01 X33.29746 Y62.96854
G01 X33.39291 Y62.95589
G01 X33.45352 Y62.95292
G01 X33.52233 Y62.95292
G01 X33.58293 Y62.95589
G01 X33.67838 Y62.96854
G01 X33.74615 Y62.98094
G01 X33.77046 Y62.98663
G01 X33.89599 Y63.02719
G01 X33.95065 Y63.04741
G01 X33.96020 Y63.05246
G01 X34.09832 Y63.12676
G01 X34.11808 Y63.13781
G01 X34.15527 Y63.16554
G01 X34.26761 Y63.25533
G01 X34.27711 Y63.26432
G01 X34.32481 Y63.31403
G01 X34.39581 Y63.39569
G01 X34.42464 Y63.43496
G01 X34.46261 Y63.49242
G01 X34.49959 Y63.55485
G01 X34.53647 Y63.63079
G01 X34.56347 Y63.69414
G01 X34.57625 Y63.72869
G01 X34.60843 Y63.84438
G01 X34.62362 Y63.91169
G01 X34.62380 Y63.91276
G01 X34.63787 Y64.06788
G01 X34.64013 Y64.10232
G01 X34.63787 Y64.13679
G01 X34.62380 Y64.29188
G01 X34.62362 Y64.29295
G01 X34.60843 Y64.36026
G01 X34.57625 Y64.47595
G01 X34.56347 Y64.51052
G01 X34.53645 Y64.57390
G01 X34.49959 Y64.64982
G01 X34.46258 Y64.71225
G01 X34.42466 Y64.76965
G01 X34.39583 Y64.80895
G01 X34.32484 Y64.89061
G01 X34.27709 Y64.94034
G01 X34.26761 Y64.94931
G01 X34.19022 Y65.01116
G01 X34.15527 Y65.03912
G01 X34.11808 Y65.06689
G01 X34.09827 Y65.07793
G01 X33.96017 Y65.15220
G01 X33.95067 Y65.15723
G01 X33.89604 Y65.17743
G01 X33.77046 Y65.21802
G01 X33.74620 Y65.22370
G01 X33.67838 Y65.23610
G01 X33.58293 Y65.24875
G01 X33.52233 Y65.25172
G01 X33.45352 Y65.25172
G01 X33.39291 Y65.24875
G01 X33.29746 Y65.23610
G01 X33.22964 Y65.22370
G01 X33.20539 Y65.21802
G01 X33.07981 Y65.17743
G01 X33.02517 Y65.15723
G01 X33.01567 Y65.15220
G01 X32.87757 Y65.07793
G01 X32.85776 Y65.06689
G01 X32.82058 Y65.03912
G01 X32.70821 Y64.94928
G01 X32.69876 Y64.94034
G01 X32.65101 Y64.89061
G01 X32.58006 Y64.80900
G01 X32.55657 Y64.77697
G01 X32.55118 Y64.76965
G01 X32.51326 Y64.71225
G01 X32.47625 Y64.64982
G01 X32.43940 Y64.57390
G01 X32.41237 Y64.51050
G01 X32.39960 Y64.47590
G01 X32.36741 Y64.36026
G01 X32.35223 Y64.29295
G01 X32.35205 Y64.29188
G01 X32.33798 Y64.13679
G01 X32.33572 Y64.10232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.77972 Y64.10232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.77972 Y64.10232
G01 X28.78198 Y64.06788
G01 X28.79605 Y63.91276
G01 X28.79623 Y63.91169
G01 X28.80184 Y63.88304
G01 X28.81144 Y63.84438
G01 X28.84360 Y63.72871
G01 X28.85637 Y63.69414
G01 X28.88337 Y63.63079
G01 X28.92025 Y63.55485
G01 X28.95724 Y63.49242
G01 X28.99521 Y63.43496
G01 X29.02404 Y63.39569
G01 X29.09503 Y63.31403
G01 X29.14273 Y63.26432
G01 X29.15223 Y63.25533
G01 X29.26458 Y63.16554
G01 X29.30176 Y63.13781
G01 X29.32152 Y63.12676
G01 X29.45965 Y63.05246
G01 X29.46920 Y63.04741
G01 X29.52386 Y63.02719
G01 X29.64939 Y62.98663
G01 X29.67369 Y62.98094
G01 X29.74146 Y62.96854
G01 X29.83691 Y62.95589
G01 X29.89752 Y62.95292
G01 X29.96633 Y62.95292
G01 X30.02693 Y62.95589
G01 X30.12238 Y62.96854
G01 X30.19015 Y62.98094
G01 X30.21446 Y62.98663
G01 X30.33999 Y63.02719
G01 X30.39465 Y63.04741
G01 X30.40420 Y63.05246
G01 X30.54232 Y63.12676
G01 X30.56208 Y63.13781
G01 X30.59927 Y63.16554
G01 X30.71161 Y63.25533
G01 X30.72111 Y63.26432
G01 X30.76881 Y63.31403
G01 X30.83981 Y63.39569
G01 X30.86864 Y63.43496
G01 X30.90661 Y63.49242
G01 X30.94359 Y63.55485
G01 X30.98047 Y63.63079
G01 X31.00747 Y63.69414
G01 X31.02025 Y63.72869
G01 X31.05243 Y63.84438
G01 X31.06762 Y63.91169
G01 X31.06780 Y63.91276
G01 X31.08187 Y64.06788
G01 X31.08413 Y64.10232
G01 X31.08187 Y64.13679
G01 X31.06780 Y64.29188
G01 X31.06762 Y64.29295
G01 X31.05243 Y64.36026
G01 X31.02025 Y64.47595
G01 X31.00747 Y64.51052
G01 X30.98045 Y64.57390
G01 X30.94359 Y64.64982
G01 X30.90658 Y64.71225
G01 X30.86866 Y64.76965
G01 X30.83983 Y64.80895
G01 X30.76884 Y64.89061
G01 X30.72109 Y64.94034
G01 X30.71161 Y64.94931
G01 X30.63422 Y65.01116
G01 X30.59927 Y65.03912
G01 X30.56208 Y65.06689
G01 X30.54227 Y65.07793
G01 X30.40417 Y65.15220
G01 X30.39467 Y65.15723
G01 X30.34004 Y65.17743
G01 X30.21446 Y65.21802
G01 X30.19020 Y65.22370
G01 X30.12238 Y65.23610
G01 X30.02693 Y65.24875
G01 X29.96633 Y65.25172
G01 X29.89752 Y65.25172
G01 X29.83691 Y65.24875
G01 X29.74146 Y65.23610
G01 X29.67364 Y65.22370
G01 X29.64939 Y65.21802
G01 X29.52381 Y65.17743
G01 X29.46917 Y65.15723
G01 X29.45967 Y65.15220
G01 X29.32157 Y65.07793
G01 X29.30176 Y65.06689
G01 X29.26458 Y65.03912
G01 X29.15221 Y64.94928
G01 X29.14276 Y64.94034
G01 X29.09501 Y64.89061
G01 X29.02406 Y64.80900
G01 X29.00057 Y64.77697
G01 X28.99518 Y64.76965
G01 X28.95726 Y64.71225
G01 X28.92025 Y64.64982
G01 X28.88340 Y64.57390
G01 X28.85637 Y64.51050
G01 X28.84360 Y64.47590
G01 X28.81141 Y64.36026
G01 X28.79623 Y64.29295
G01 X28.79605 Y64.29188
G01 X28.78198 Y64.13679
G01 X28.77972 Y64.10232
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X27.02097 Y70.15115 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X27.02097 Y70.15115
G01 X27.02074 Y70.15179
G01 X27.00492 Y70.20383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.98617 Y70.15031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.98617 Y70.15031
G01 X27.02026 Y70.15120
G01 X27.02097 Y70.15115
G01 X27.07822 Y70.10802
G01 X27.10563 Y70.08880
G01 X27.24070 Y69.97208
G01 X27.25772 Y69.95379
G01 X27.29072 Y69.92055
G01 X27.29135 Y69.91996
G01 X27.34820 Y69.85961
G01 X27.40210 Y69.79525
G01 X27.42490 Y69.76929
G01 X27.45086 Y69.74648
G01 X27.54390 Y69.66858
G01 X27.56892 Y69.64762
G01 X27.57926 Y69.64028
G01 X27.61335 Y69.61747
G01 X27.63727 Y69.60312
G01 X27.73006 Y69.54996
G01 X27.78414 Y69.52438
G01 X27.84774 Y69.49804
G01 X27.90405 Y69.47790
G01 X28.00725 Y69.44988
G01 X28.07456 Y69.43510
G01 X28.08703 Y69.43302
G01 X28.24047 Y69.41943
G01 X28.27494 Y69.41722
G01 X28.30938 Y69.41943
G01 X28.46283 Y69.43302
G01 X28.47527 Y69.43510
G01 X28.54258 Y69.44988
G01 X28.64581 Y69.47790
G01 X28.70209 Y69.49804
G01 X28.76572 Y69.52438
G01 X28.81977 Y69.54996
G01 X28.91258 Y69.60315
G01 X28.97060 Y69.64028
G01 X28.98091 Y69.64762
G01 X29.00590 Y69.66855
G01 X29.09704 Y69.73332
G01 X29.10557 Y69.73845
G01 X29.14939 Y69.76685
G01 X29.16719 Y69.77930
G01 X29.32444 Y69.86583
G01 X29.40263 Y69.89934
G01 X29.40486 Y69.90030
G01 X29.40588 Y69.90015
G01 X29.46536 Y69.88587
G01 X29.47448 Y69.88278
G01 X29.55246 Y69.76931
G01 X29.61162 Y69.66843
G01 X29.63719 Y69.62784
G01 X29.68454 Y69.55788
G01 X29.68820 Y69.55253
G01 X29.74814 Y69.49258
G01 X29.76734 Y69.47981
G01 X29.82063 Y69.44877
G01 X29.90679 Y69.42230
G01 X29.92426 Y69.42024
G01 X29.96490 Y69.41907
G01 X31.66490 Y69.41907
G01 X31.70557 Y69.42024
G01 X31.72307 Y69.42230
G01 X31.80922 Y69.44877
G01 X31.87841 Y69.49035
G01 X31.97443 Y69.55580
G01 X32.02794 Y69.59553
G01 X32.14603 Y69.69042
G01 X32.21192 Y69.68486
G01 X32.31006 Y69.65512
G01 X32.36645 Y69.63134
G01 X32.45614 Y69.58194
G01 X32.53358 Y69.51496
G01 X32.59541 Y69.43335
G01 X32.62705 Y69.38100
G01 X32.66012 Y69.31577
G01 X32.68311 Y69.24633
G01 X32.68324 Y69.24582
G01 X32.68558 Y69.23602
G01 X32.69810 Y69.18113
G01 X32.76985 Y68.99835
G01 X32.86802 Y68.82830
G01 X32.99043 Y68.67478
G01 X33.11341 Y68.56068
G01 X33.11341 Y68.59388
G01 X33.07689 Y68.62385
G01 X33.00897 Y68.69177
G01 X32.90948 Y68.81300
G01 X32.85611 Y68.89286
G01 X32.78220 Y69.03119
G01 X32.74544 Y69.11994
G01 X32.69990 Y69.27000
G01 X32.68118 Y69.36421
G01 X32.66579 Y69.52029
G01 X32.66579 Y69.61633
G01 X32.68118 Y69.77241
G01 X32.69990 Y69.86662
G01 X32.74544 Y70.01671
G01 X32.78220 Y70.10543
G01 X32.85611 Y70.24376
G01 X32.90948 Y70.32362
G01 X33.00897 Y70.44485
G01 X33.07689 Y70.51277
G01 X33.11341 Y70.54274
G01 X33.11341 Y71.13388
G01 X33.07689 Y71.16385
G01 X33.00897 Y71.23177
G01 X32.97897 Y71.26832
G01 X32.36462 Y71.26832
G01 X32.28799 Y71.27434
G01 X32.21326 Y71.29227
G01 X32.15492 Y71.31125
G01 X32.05957 Y71.46931
G01 X32.03257 Y71.52555
G01 X32.01400 Y71.56174
G01 X31.97958 Y71.62458
G01 X31.94163 Y71.68613
G01 X31.88174 Y71.74602
G01 X31.86655 Y71.75620
G01 X31.80917 Y71.78988
G01 X31.72312 Y71.81635
G01 X31.70557 Y71.81841
G01 X31.66490 Y71.81958
G01 X31.24550 Y71.81958
G01 X31.13460 Y71.82837
G01 X31.07341 Y71.83804
G01 X30.82073 Y71.92242
G01 X30.75954 Y71.95359
G01 X30.75197 Y71.95930
G01 X30.74789 Y71.96240
G01 X30.70369 Y72.03893
G01 X30.67204 Y72.13637
G01 X30.66132 Y72.23822
G01 X30.66132 Y72.29941
G01 X30.67204 Y72.40129
G01 X30.69973 Y72.48653
G01 X30.70145 Y72.48767
G01 X30.75083 Y72.52021
G01 X30.80310 Y72.55239
G01 X30.86132 Y72.58577
G01 X30.89988 Y72.60657
G01 X30.96803 Y72.64111
G01 X31.02541 Y72.66715
G01 X31.05423 Y72.67876
G01 X31.10615 Y72.69732
G01 X31.11410 Y72.69984
G01 X31.14674 Y72.71096
G01 X31.17776 Y72.72620
G01 X31.30737 Y72.79384
G01 X31.31639 Y72.79951
G01 X31.37295 Y72.83893
G01 X31.45291 Y72.90070
G01 X31.49434 Y72.93824
G01 X31.54301 Y72.98691
G01 X31.58055 Y73.02834
G01 X31.64232 Y73.10830
G01 X31.68174 Y73.16486
G01 X31.68741 Y73.17388
G01 X31.75505 Y73.30350
G01 X31.77026 Y73.33448
G01 X31.78141 Y73.36715
G01 X31.82520 Y73.50654
G01 X31.82761 Y73.51703
G01 X31.83970 Y73.58483
G01 X31.85258 Y73.68508
G01 X31.85355 Y73.70474
G01 X31.85624 Y73.74076
G01 X31.85972 Y73.77533
G01 X31.86498 Y73.81579
G01 X31.87468 Y73.87698
G01 X31.95896 Y74.12940
G01 X31.99012 Y74.19057
G01 X31.99594 Y74.19892
G01 X31.99790 Y74.20172
G01 X32.07544 Y74.24652
G01 X32.17290 Y74.27820
G01 X32.27483 Y74.28891
G01 X32.33602 Y74.28891
G01 X32.35560 Y74.28686
G01 X32.43787 Y74.27820
G01 X32.53531 Y74.24655
G01 X32.62401 Y74.19534
G01 X32.67351 Y74.15937
G01 X32.74097 Y74.10019
G01 X32.79652 Y74.02973
G01 X32.80216 Y74.02105
G01 X32.81552 Y73.99923
G01 X32.86802 Y73.90830
G01 X32.99779 Y73.74558
G01 X33.04084 Y73.68191
G01 X33.07343 Y73.61228
G01 X33.09495 Y73.55498
G01 X33.11341 Y73.48394
G01 X33.11341 Y73.67388
G01 X33.07689 Y73.70385
G01 X33.00897 Y73.77177
G01 X32.90948 Y73.89300
G01 X32.85611 Y73.97286
G01 X32.78220 Y74.11119
G01 X32.74544 Y74.19994
G01 X32.69990 Y74.35000
G01 X32.68118 Y74.44421
G01 X32.66579 Y74.60029
G01 X32.66579 Y74.69633
G01 X32.68118 Y74.85241
G01 X32.69990 Y74.94662
G01 X32.74544 Y75.09671
G01 X32.78220 Y75.18543
G01 X32.85611 Y75.32376
G01 X32.90948 Y75.40362
G01 X33.00897 Y75.52485
G01 X33.07689 Y75.59277
G01 X33.11341 Y75.62274
G01 X33.11341 Y75.82170
G01 X33.10854 Y75.79237
G01 X33.09225 Y75.73339
G01 X33.06129 Y75.65096
G01 X33.01608 Y75.57540
G01 X33.01085 Y75.56821
G01 X32.99779 Y75.55107
G01 X32.86802 Y75.38835
G01 X32.76985 Y75.21830
G01 X32.70120 Y75.04340
G01 X32.66757 Y74.97428
G01 X32.62357 Y74.91127
G01 X32.58471 Y74.86400
G01 X32.51174 Y74.79211
G01 X32.42540 Y74.73694
G01 X32.32949 Y74.70095
G01 X32.27029 Y74.68556
G01 X32.16899 Y74.67030
G01 X32.06673 Y74.67642
G01 X31.98591 Y74.69869
G01 X31.98591 Y74.69872
G01 X31.97239 Y74.71492
G01 X31.92914 Y74.77212
G01 X31.87262 Y74.84726
G01 X31.80524 Y74.95310
G01 X31.78812 Y74.98553
G01 X31.78598 Y74.98952
G01 X31.75507 Y75.04718
G01 X31.75144 Y75.05406
G01 X31.68741 Y75.17677
G01 X31.68174 Y75.18579
G01 X31.64232 Y75.24235
G01 X31.58055 Y75.32231
G01 X31.54301 Y75.36374
G01 X31.49434 Y75.41241
G01 X31.45291 Y75.44995
G01 X31.37295 Y75.51172
G01 X31.31639 Y75.55114
G01 X31.30737 Y75.55681
G01 X31.17776 Y75.62445
G01 X31.14677 Y75.63966
G01 X31.11410 Y75.65081
G01 X30.97463 Y75.69463
G01 X30.96422 Y75.69701
G01 X30.89642 Y75.70910
G01 X30.79620 Y75.72198
G01 X30.74039 Y75.72473
G01 X30.67148 Y75.72473
G01 X30.61565 Y75.72198
G01 X30.51542 Y75.70910
G01 X30.44763 Y75.69701
G01 X30.43722 Y75.69463
G01 X30.29775 Y75.65081
G01 X30.26508 Y75.63966
G01 X30.23409 Y75.62445
G01 X30.10448 Y75.55681
G01 X30.09546 Y75.55114
G01 X30.03890 Y75.51172
G01 X29.95894 Y75.44995
G01 X29.91751 Y75.41241
G01 X29.86884 Y75.36374
G01 X29.83128 Y75.32231
G01 X29.80107 Y75.28322
G01 X29.76805 Y75.24357
G01 X29.72787 Y75.19877
G01 X29.72081 Y75.19077
G01 X29.68660 Y75.15150
G01 X29.60814 Y75.07316
G01 X29.53768 Y75.01162
G01 X29.48076 Y74.96590
G01 X29.48073 Y74.96587
G01 X29.48027 Y74.96552
G01 X29.45241 Y74.87362
G01 X29.43592 Y74.79077
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.39109 Y74.96587 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.39109 Y74.96587
G01 X29.40534 Y74.96440
G01 X29.46653 Y74.96440
G01 X29.48073 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.43592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.43592 Y73.55973
G01 X29.45241 Y73.47700
G01 X29.49793 Y73.32691
G01 X29.53468 Y73.23819
G01 X29.60862 Y73.09986
G01 X29.66198 Y73.02001
G01 X29.76148 Y72.89877
G01 X29.82940 Y72.83085
G01 X29.95063 Y72.73136
G01 X30.03049 Y72.67800
G01 X30.16882 Y72.60406
G01 X30.25754 Y72.56730
G01 X30.40763 Y72.52179
G01 X30.50184 Y72.50304
G01 X30.65792 Y72.48767
G01 X30.70145 Y72.48767
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.75197 Y71.95930 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.75197 Y71.95930
G01 X29.96493 Y71.95930
G01 X29.86935 Y71.94990
G01 X29.77743 Y71.92202
G01 X29.69272 Y71.87673
G01 X29.61845 Y71.81579
G01 X29.57595 Y71.76400
G01 X29.55751 Y71.74155
G01 X29.51223 Y71.65684
G01 X29.48436 Y71.56492
G01 X29.47494 Y71.46931
G01 X29.47491 Y71.20825
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.47491 Y70.03035 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.47491 Y70.03035
G01 X29.41383 Y69.91610
G01 X29.40263 Y69.89934
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.55246 Y69.76931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.55246 Y69.76931
G01 X29.47494 Y69.88212
G01 X29.47491 Y70.03035
G01 X29.48418 Y70.06743
G01 X29.50262 Y70.15986
G01 X29.52734 Y70.32651
G01 X29.53572 Y70.41143
G01 X29.54390 Y70.57805
G01 X29.54390 Y70.66057
G01 X29.53572 Y70.82722
G01 X29.52734 Y70.91214
G01 X29.50262 Y71.07879
G01 X29.48418 Y71.17122
G01 X29.47491 Y71.20825
G01 X29.41383 Y71.32252
G01 X29.36046 Y71.40241
G01 X29.25475 Y71.53121
G01 X29.18683 Y71.59913
G01 X29.05802 Y71.70485
G01 X28.97817 Y71.75821
G01 X28.83120 Y71.83675
G01 X28.74245 Y71.87350
G01 X28.58299 Y71.92189
G01 X28.48878 Y71.94063
G01 X28.32297 Y71.95697
G01 X28.22691 Y71.95697
G01 X28.06107 Y71.94063
G01 X27.96686 Y71.92189
G01 X27.80743 Y71.87350
G01 X27.71868 Y71.83675
G01 X27.57172 Y71.75821
G01 X27.49186 Y71.70485
G01 X27.36306 Y71.59913
G01 X27.29511 Y71.53121
G01 X27.18942 Y71.40241
G01 X27.13606 Y71.32252
G01 X27.05749 Y71.17559
G01 X27.02074 Y71.08684
G01 X27.00492 Y71.03469
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89592 Y73.55973 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89592 Y73.55973
G01 X26.91241 Y73.47700
G01 X26.95793 Y73.32691
G01 X26.99468 Y73.23819
G01 X27.06862 Y73.09986
G01 X27.12198 Y73.02001
G01 X27.22148 Y72.89877
G01 X27.28940 Y72.83085
G01 X27.41063 Y72.73136
G01 X27.49049 Y72.67800
G01 X27.62882 Y72.60406
G01 X27.71754 Y72.56730
G01 X27.86763 Y72.52179
G01 X27.96184 Y72.50304
G01 X28.11792 Y72.48767
G01 X28.21396 Y72.48767
G01 X28.37004 Y72.50304
G01 X28.46425 Y72.52179
G01 X28.61434 Y72.56730
G01 X28.70306 Y72.60406
G01 X28.84139 Y72.67800
G01 X28.92124 Y72.73136
G01 X29.04248 Y72.83085
G01 X29.11040 Y72.89877
G01 X29.19092 Y72.99689
G01 X29.20989 Y73.02001
G01 X29.26326 Y73.09986
G01 X29.33719 Y73.23819
G01 X29.37395 Y73.32691
G01 X29.41947 Y73.47700
G01 X29.43592 Y73.55973
G01 X29.43592 Y74.79077
G01 X29.41947 Y74.87362
G01 X29.39160 Y74.96549
G01 X29.39109 Y74.96587
G01 X29.39109 Y74.96590
G01 X29.33417 Y75.01162
G01 X29.26371 Y75.07316
G01 X29.18525 Y75.15150
G01 X29.15104 Y75.19077
G01 X29.14398 Y75.19877
G01 X29.10379 Y75.24357
G01 X29.07077 Y75.28322
G01 X29.04057 Y75.32231
G01 X29.00301 Y75.36374
G01 X28.95434 Y75.41241
G01 X28.91291 Y75.44995
G01 X28.83295 Y75.51172
G01 X28.77639 Y75.55114
G01 X28.76737 Y75.55681
G01 X28.63775 Y75.62445
G01 X28.60677 Y75.63966
G01 X28.57410 Y75.65081
G01 X28.43463 Y75.69463
G01 X28.42422 Y75.69701
G01 X28.35642 Y75.70910
G01 X28.25620 Y75.72198
G01 X28.20039 Y75.72473
G01 X28.13148 Y75.72473
G01 X28.07565 Y75.72198
G01 X27.97542 Y75.70910
G01 X27.90763 Y75.69701
G01 X27.89722 Y75.69463
G01 X27.75775 Y75.65081
G01 X27.72508 Y75.63966
G01 X27.69409 Y75.62445
G01 X27.56448 Y75.55681
G01 X27.55546 Y75.55114
G01 X27.49890 Y75.51172
G01 X27.41894 Y75.44995
G01 X27.37751 Y75.41241
G01 X27.32884 Y75.36374
G01 X27.29128 Y75.32231
G01 X27.26107 Y75.28322
G01 X27.22805 Y75.24357
G01 X27.18787 Y75.19877
G01 X27.18081 Y75.19077
G01 X27.14660 Y75.15150
G01 X27.06814 Y75.07316
G01 X26.99768 Y75.01162
G01 X26.94076 Y74.96590
G01 X26.94073 Y74.96587
G01 X26.92653 Y74.96440
G01 X26.86534 Y74.96440
G01 X26.85109 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.89592 Y74.79077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.89592 Y74.79077
G01 X26.91241 Y74.87362
G01 X26.94027 Y74.96552
G01 X26.94073 Y74.96587
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.54593 Y80.38865 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.54593 Y80.38865
G01 X31.57153 Y80.40831
G01 X31.69294 Y80.52972
G01 X31.79749 Y80.66597
G01 X31.88337 Y80.81471
G01 X31.94161 Y80.95532
G01 X31.91649 Y80.95532
G01 X31.91395 Y80.94691
G01 X31.87719 Y80.85819
G01 X31.80326 Y80.71986
G01 X31.74989 Y80.64001
G01 X31.65040 Y80.51877
G01 X31.58248 Y80.45085
G01 X31.54593 Y80.42086
G01 X31.54593 Y80.38865
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.94773 Y78.02835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.94773 Y78.02835
G01 X32.99043 Y78.08187
G01 X33.11341 Y78.19597
G01 X33.11341 Y78.16274
G01 X33.07689 Y78.13277
G01 X33.00897 Y78.06485
G01 X32.97900 Y78.02835
G01 X32.94773 Y78.02835
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.94775 Y76.34832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.94775 Y76.34832
G01 X32.97897 Y76.34832
G01 X33.00897 Y76.31177
G01 X33.07689 Y76.24385
G01 X33.11341 Y76.21388
G01 X33.11341 Y76.02394
G01 X33.09495 Y76.09498
G01 X33.07343 Y76.15228
G01 X33.04087 Y76.22191
G01 X32.99779 Y76.28556
G01 X32.94775 Y76.34832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.98591 Y74.69869 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.98591 Y74.69869
G01 X31.98619 Y74.69839
G01 X31.99358 Y74.62333
G01 X31.99594 Y74.57532
G01 X31.99594 Y74.19892
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.94775 Y72.94833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.94775 Y72.94833
G01 X32.97900 Y72.94833
G01 X33.00897 Y72.98485
G01 X33.07689 Y73.05277
G01 X33.11341 Y73.08274
G01 X33.11341 Y73.28170
G01 X33.10854 Y73.25237
G01 X33.09225 Y73.19339
G01 X33.06129 Y73.11096
G01 X33.01608 Y73.03540
G01 X33.01085 Y73.02821
G01 X32.99779 Y73.01107
G01 X32.94775 Y72.94833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.15492 Y71.31125 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.15492 Y71.31125
G01 X32.15494 Y69.76931
G01 X32.14727 Y69.69144
G01 X32.14603 Y69.69045
G01 X32.02794 Y69.59553
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.14603 Y69.69045 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.14603 Y69.69045
G01 X32.14603 Y69.69042
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y68.56068 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y68.56068
G01 X34.79342 Y68.59385
G01 X34.82997 Y68.62385
G01 X34.89789 Y68.69177
G01 X34.92789 Y68.72832
G01 X34.95910 Y68.72832
G01 X34.91641 Y68.67480
G01 X34.79342 Y68.56068
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y70.54277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y70.54277
G01 X34.79342 Y70.73281
G01 X34.81183 Y70.66184
G01 X34.83332 Y70.60454
G01 X34.86594 Y70.53482
G01 X34.90904 Y70.47107
G01 X34.95908 Y70.40833
G01 X34.92789 Y70.40833
G01 X34.89789 Y70.44485
G01 X34.82997 Y70.51277
G01 X34.79342 Y70.54277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y70.93479 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y70.93479
G01 X34.79342 Y71.13385
G01 X34.82997 Y71.16385
G01 X34.89789 Y71.23177
G01 X34.92789 Y71.26832
G01 X34.95908 Y71.26832
G01 X34.90904 Y71.20558
G01 X34.89530 Y71.18752
G01 X34.89009 Y71.18034
G01 X34.84531 Y71.10518
G01 X34.81460 Y71.02326
G01 X34.79832 Y70.96428
G01 X34.79342 Y70.93479
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y73.08277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y73.08277
G01 X34.79342 Y73.27281
G01 X34.81183 Y73.20185
G01 X34.83332 Y73.14454
G01 X34.86594 Y73.07482
G01 X34.90904 Y73.01107
G01 X34.95908 Y72.94833
G01 X34.92789 Y72.94833
G01 X34.89789 Y72.98485
G01 X34.82997 Y73.05277
G01 X34.79342 Y73.08277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y73.47479 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y73.47479
G01 X34.79342 Y73.67385
G01 X34.82997 Y73.70385
G01 X34.89789 Y73.77177
G01 X34.92789 Y73.80832
G01 X34.95908 Y73.80832
G01 X34.90904 Y73.74558
G01 X34.89530 Y73.72752
G01 X34.89009 Y73.72034
G01 X34.84531 Y73.64518
G01 X34.81460 Y73.56326
G01 X34.79832 Y73.50428
G01 X34.79342 Y73.47479
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y75.62277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y75.62277
G01 X34.79342 Y75.81281
G01 X34.81183 Y75.74184
G01 X34.83332 Y75.68454
G01 X34.86594 Y75.61482
G01 X34.90904 Y75.55107
G01 X34.95908 Y75.48833
G01 X34.92789 Y75.48833
G01 X34.89789 Y75.52485
G01 X34.82997 Y75.59277
G01 X34.79342 Y75.62277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y76.01479 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y76.01479
G01 X34.79342 Y76.21385
G01 X34.82997 Y76.24385
G01 X34.89789 Y76.31177
G01 X34.92789 Y76.34832
G01 X34.95908 Y76.34832
G01 X34.90904 Y76.28558
G01 X34.89530 Y76.26752
G01 X34.89009 Y76.26034
G01 X34.84531 Y76.18518
G01 X34.81460 Y76.10326
G01 X34.79832 Y76.04428
G01 X34.79342 Y76.01479
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.79342 Y78.16277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.79342 Y78.16277
G01 X34.82997 Y78.13277
G01 X34.89789 Y78.06485
G01 X34.92789 Y78.02835
G01 X34.95910 Y78.02835
G01 X34.91641 Y78.08187
G01 X34.79342 Y78.19597
G01 X34.79342 Y78.16277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.80693 Y81.16307 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.80693 Y81.16307
G01 X34.81148 Y81.11189
G01 X34.84087 Y81.00914
G01 X34.88887 Y80.91722
G01 X34.95443 Y80.83686
G01 X35.03485 Y80.77127
G01 X35.12674 Y80.72327
G01 X35.22949 Y80.69388
G01 X35.28067 Y80.68933
G01 X35.32692 Y80.68933
G01 X35.32692 Y80.70932
G01 X35.31694 Y80.70932
G01 X35.22133 Y80.71872
G01 X35.12941 Y80.74661
G01 X35.04470 Y80.79190
G01 X34.97046 Y80.85283
G01 X34.90952 Y80.92708
G01 X34.86423 Y81.01179
G01 X34.83635 Y81.10371
G01 X34.82695 Y81.19931
G01 X34.82695 Y81.20932
G01 X34.80693 Y81.20932
G01 X34.80693 Y81.16307
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.00693 Y80.68933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.00693 Y80.68933
G01 X37.05318 Y80.68933
G01 X37.10436 Y80.69388
G01 X37.20711 Y80.72327
G01 X37.29903 Y80.77127
G01 X37.37939 Y80.83683
G01 X37.44498 Y80.91725
G01 X37.49298 Y81.00914
G01 X37.52237 Y81.11189
G01 X37.52692 Y81.16307
G01 X37.52692 Y81.20932
G01 X37.50693 Y81.20932
G01 X37.50693 Y81.19931
G01 X37.49753 Y81.10371
G01 X37.46964 Y81.01179
G01 X37.42435 Y80.92708
G01 X37.36342 Y80.85283
G01 X37.28917 Y80.79190
G01 X37.20446 Y80.74661
G01 X37.11254 Y80.71872
G01 X37.01694 Y80.70932
G01 X37.00693 Y80.70932
G01 X37.00693 Y80.68933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.79417 Y77.47672 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.79417 Y77.47672
G01 X42.83735 Y77.43448
G01 X42.83735 Y77.43445
G01 X42.84570 Y77.39241
G01 X42.86107 Y77.23633
G01 X42.86107 Y77.14029
G01 X42.84570 Y76.98421
G01 X42.82696 Y76.89000
G01 X42.78144 Y76.73994
G01 X42.74469 Y76.65119
G01 X42.67075 Y76.51286
G01 X42.61738 Y76.43300
G01 X42.51789 Y76.31177
G01 X42.44997 Y76.24385
G01 X42.32874 Y76.14436
G01 X42.24888 Y76.09099
G01 X42.11058 Y76.01708
G01 X42.02183 Y75.98030
G01 X41.87174 Y75.93478
G01 X41.78888 Y75.91832
G01 X41.35787 Y75.91832
G01 X41.27512 Y75.93478
G01 X41.18360 Y75.96255
G01 X41.18342 Y75.96275
G01 X41.13735 Y76.02089
G01 X41.07568 Y76.09084
G01 X41.00936 Y76.15805
G01 X40.96252 Y76.20021
G01 X40.95833 Y76.20397
G01 X40.90552 Y76.25081
G01 X40.87791 Y76.27405
G01 X40.79419 Y76.34095
G01 X40.79369 Y76.34139
G01 X40.78429 Y76.35025
G01 X40.73651 Y76.40004
G01 X40.66554 Y76.48170
G01 X40.63669 Y76.52102
G01 X40.59874 Y76.57842
G01 X40.56176 Y76.64085
G01 X40.52488 Y76.71680
G01 X40.49788 Y76.78015
G01 X40.48510 Y76.81469
G01 X40.45295 Y76.93039
G01 X40.44972 Y76.94238
G01 X40.43773 Y76.99770
G01 X40.43755 Y76.99879
G01 X40.42348 Y77.15388
G01 X40.42122 Y77.18832
G01 X40.42348 Y77.22279
G01 X40.43755 Y77.37788
G01 X40.43773 Y77.37895
G01 X40.45292 Y77.44626
G01 X40.48510 Y77.56196
G01 X40.49788 Y77.59653
G01 X40.52490 Y77.65990
G01 X40.56176 Y77.73582
G01 X40.57769 Y77.76269
G01 X40.59877 Y77.79825
G01 X40.63669 Y77.85566
G01 X40.66554 Y77.89495
G01 X40.73651 Y77.97664
G01 X40.78424 Y78.02635
G01 X40.79374 Y78.03531
G01 X40.90608 Y78.12513
G01 X40.94327 Y78.15289
G01 X40.96308 Y78.16394
G01 X41.10118 Y78.23821
G01 X41.11068 Y78.24326
G01 X41.16537 Y78.26346
G01 X41.29089 Y78.30402
G01 X41.31520 Y78.30971
G01 X41.38292 Y78.32210
G01 X41.47842 Y78.33478
G01 X41.53897 Y78.33775
G01 X41.60788 Y78.33775
G01 X41.66844 Y78.33478
G01 X41.76392 Y78.32210
G01 X41.83161 Y78.30971
G01 X41.85594 Y78.30402
G01 X41.98147 Y78.26346
G01 X42.03615 Y78.24326
G01 X42.04568 Y78.23821
G01 X42.18378 Y78.16394
G01 X42.20359 Y78.15289
G01 X42.24078 Y78.12513
G01 X42.24100 Y78.12495
G01 X42.35312 Y78.03531
G01 X42.36259 Y78.02635
G01 X42.41035 Y77.97664
G01 X42.48131 Y77.89495
G01 X42.51017 Y77.85566
G01 X42.54812 Y77.79820
G01 X42.56917 Y77.76269
G01 X42.57400 Y77.75462
G01 X42.57656 Y77.75043
G01 X42.63582 Y77.66727
G01 X42.64923 Y77.65101
G01 X42.68302 Y77.60692
G01 X42.68787 Y77.60011
G01 X42.79417 Y77.47672
G01 X42.83735 Y77.43445
G01 X42.83793 Y77.43389
G01 X42.91680 Y77.42561
G01 X42.97799 Y77.42561
G01 X43.07984 Y77.43633
G01 X43.17725 Y77.46795
G01 X43.25490 Y77.51278
G01 X43.25688 Y77.51560
G01 X43.26249 Y77.52366
G01 X43.29366 Y77.58479
G01 X43.37811 Y77.83752
G01 X43.38781 Y77.89871
G01 X43.39660 Y78.00973
G01 X43.39660 Y81.23919
G01 X43.39607 Y81.26670
G01 X43.39546 Y81.28225
G01 X43.37717 Y81.41725
G01 X43.37369 Y81.42207
G01 X43.33727 Y81.47221
G01 X43.26503 Y81.55687
G01 X41.31840 Y83.50350
G01 X41.29851 Y83.52263
G01 X41.28711 Y83.53317
G01 X41.17878 Y83.61564
G01 X41.17281 Y83.61661
G01 X41.11162 Y83.62628
G01 X41.00075 Y83.63507
G01 X38.07807 Y83.63507
G01 X37.97350 Y83.62727
G01 X37.91566 Y83.61864
G01 X37.67312 Y83.54142
G01 X37.61193 Y83.51163
G01 X37.58597 Y83.49532
G01 X34.75075 Y83.49532
G01 X34.74173 Y83.50106
G01 X34.68054 Y83.53223
G01 X34.42786 Y83.61661
G01 X34.36667 Y83.62628
G01 X34.25580 Y83.63507
G01 X32.32685 Y83.63507
G01 X32.29017 Y83.63411
G01 X32.26950 Y83.63304
G01 X32.11811 Y83.60881
G01 X32.05693 Y83.59243
G01 X31.84524 Y83.49532
G01 X26.98988 Y83.49532
G01 X26.71017 Y83.21562
G01 X26.56842 Y83.07383
G01 X26.57040 Y83.07185
G01 X26.66989 Y82.95062
G01 X26.72326 Y82.87076
G01 X26.79719 Y82.73243
G01 X26.83395 Y82.64371
G01 X26.87947 Y82.49362
G01 X26.89592 Y82.41077
G01 X26.89592 Y81.17973
G01 X26.87947 Y81.09700
G01 X26.85160 Y81.00516
G01 X26.79417 Y80.95903
G01 X26.72371 Y80.89749
G01 X26.64535 Y80.81925
G01 X26.61104 Y80.77988
G01 X26.60405 Y80.77198
G01 X26.56379 Y80.72710
G01 X26.53072 Y80.68740
G01 X26.50055 Y80.64831
G01 X26.46301 Y80.60691
G01 X26.41434 Y80.55824
G01 X26.37294 Y80.52070
G01 X26.29295 Y80.45893
G01 X26.23639 Y80.41951
G01 X26.22737 Y80.41387
G01 X26.09775 Y80.34620
G01 X26.06677 Y80.33099
G01 X26.03410 Y80.31984
G01 X25.89463 Y80.27602
G01 X25.88422 Y80.27364
G01 X25.81642 Y80.26155
G01 X25.71620 Y80.24867
G01 X25.66039 Y80.24593
G01 X25.59148 Y80.24593
G01 X25.53565 Y80.24867
G01 X25.43542 Y80.26155
G01 X25.36763 Y80.27364
G01 X25.35722 Y80.27602
G01 X25.21775 Y80.31984
G01 X25.18508 Y80.33099
G01 X25.15409 Y80.34620
G01 X25.02448 Y80.41387
G01 X25.01546 Y80.41951
G01 X24.95890 Y80.45893
G01 X24.87891 Y80.52070
G01 X24.83751 Y80.55824
G01 X24.78884 Y80.60691
G01 X24.75130 Y80.64831
G01 X24.72113 Y80.68740
G01 X24.68805 Y80.72710
G01 X24.64780 Y80.77198
G01 X24.64081 Y80.77988
G01 X24.60650 Y80.81925
G01 X24.52814 Y80.89749
G01 X24.45768 Y80.95903
G01 X24.40076 Y81.00475
G01 X24.40073 Y81.00475
G01 X24.38653 Y81.00625
G01 X24.32534 Y81.00625
G01 X24.31109 Y81.00475
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.45768 Y80.95903 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.45768 Y80.95903
G01 X24.40073 Y81.00475
G01 X24.40027 Y81.00513
G01 X24.37241 Y81.09700
G01 X24.35592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.91768 Y80.95903 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.91768 Y80.95903
G01 X21.86073 Y81.00475
G01 X21.86027 Y81.00513
G01 X21.83241 Y81.09700
G01 X21.81592 Y81.17973
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.77109 Y81.00475 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.77109 Y81.00475
G01 X21.78534 Y81.00625
G01 X21.84653 Y81.00625
G01 X21.86073 Y81.00475
G01 X21.86076 Y81.00475
G01 X21.91768 Y80.95903
G01 X21.98814 Y80.89749
G01 X22.06650 Y80.81925
G01 X22.10081 Y80.77988
G01 X22.10780 Y80.77198
G01 X22.14805 Y80.72710
G01 X22.18113 Y80.68740
G01 X22.21130 Y80.64831
G01 X22.24884 Y80.60691
G01 X22.29751 Y80.55824
G01 X22.33891 Y80.52070
G01 X22.41890 Y80.45893
G01 X22.47546 Y80.41951
G01 X22.48448 Y80.41387
G01 X22.61409 Y80.34620
G01 X22.64508 Y80.33099
G01 X22.67775 Y80.31984
G01 X22.81722 Y80.27602
G01 X22.82763 Y80.27364
G01 X22.89542 Y80.26155
G01 X22.99565 Y80.24867
G01 X23.05148 Y80.24593
G01 X23.12039 Y80.24593
G01 X23.17620 Y80.24867
G01 X23.27642 Y80.26155
G01 X23.34422 Y80.27364
G01 X23.35463 Y80.27602
G01 X23.49410 Y80.31984
G01 X23.52677 Y80.33099
G01 X23.55775 Y80.34620
G01 X23.68737 Y80.41387
G01 X23.69639 Y80.41951
G01 X23.75295 Y80.45893
G01 X23.83294 Y80.52070
G01 X23.87434 Y80.55824
G01 X23.92301 Y80.60691
G01 X23.96055 Y80.64831
G01 X23.99072 Y80.68740
G01 X24.02379 Y80.72710
G01 X24.06405 Y80.77198
G01 X24.07104 Y80.77988
G01 X24.10535 Y80.81925
G01 X24.18371 Y80.89749
G01 X24.25417 Y80.95903
G01 X24.31160 Y81.00516
G01 X24.33947 Y81.09700
G01 X24.35592 Y81.17973
G01 X24.35592 Y82.41077
G01 X24.33947 Y82.49362
G01 X24.29395 Y82.64371
G01 X24.25719 Y82.73243
G01 X24.18326 Y82.87076
G01 X24.12989 Y82.95062
G01 X24.03040 Y83.07185
G01 X23.96248 Y83.13977
G01 X23.92593 Y83.16977
G01 X23.92593 Y83.47937
G01 X24.57213 Y84.12555
G01 X24.95788 Y84.51132
G01 X25.62996 Y84.51132
G01 X26.22110 Y84.75615
G01 X26.24467 Y84.76527
G01 X26.31327 Y84.78983
G01 X26.35356 Y84.80208
G01 X26.42216 Y84.81925
G01 X26.45716 Y84.82623
G01 X26.52577 Y84.83642
G01 X26.55777 Y84.83957
G01 X26.62641 Y84.84294
G01 X26.64195 Y84.84333
G01 X41.47690 Y84.84333
G01 X41.49242 Y84.84294
G01 X41.56102 Y84.83957
G01 X41.59302 Y84.83642
G01 X41.66163 Y84.82623
G01 X41.66427 Y84.82582
G01 X41.69066 Y84.80807
G01 X41.74636 Y84.76677
G01 X41.77039 Y84.74703
G01 X41.82129 Y84.70091
G01 X41.83214 Y84.69060
G01 X44.45213 Y82.07061
G01 X44.46244 Y82.05976
G01 X44.50856 Y82.00886
G01 X44.52830 Y81.98483
G01 X44.56960 Y81.92913
G01 X44.58878 Y81.90041
G01 X44.62512 Y81.83975
G01 X44.63516 Y81.82202
G01 X44.63655 Y81.80300
G01 X44.63993 Y81.73437
G01 X44.64039 Y81.71532
G01 X44.64039 Y69.24770
G01 X44.64085 Y69.22868
G01 X44.64423 Y69.16007
G01 X44.64575 Y69.13975
G01 X44.65517 Y69.12319
G01 X44.69152 Y69.06251
G01 X44.71075 Y69.03370
G01 X44.75205 Y68.97800
G01 X44.77183 Y68.95390
G01 X44.81799 Y68.90300
G01 X44.82832 Y68.89213
G01 X48.56212 Y65.15833
G01 X48.57300 Y65.14799
G01 X48.62390 Y65.10184
G01 X48.64800 Y65.08205
G01 X48.70370 Y65.04075
G01 X48.73251 Y65.02152
G01 X48.78661 Y64.98911
G01 X48.79403 Y64.98799
G01 X48.83109 Y64.98434
G01 X48.89972 Y64.98096
G01 X48.91775 Y64.98053
G01 X74.62255 Y64.98053
G01 X74.64058 Y64.98096
G01 X74.70919 Y64.98434
G01 X74.74622 Y64.98799
G01 X74.81483 Y64.99818
G01 X74.85501 Y65.00618
G01 X74.92362 Y65.02338
G01 X74.96936 Y65.03727
G01 X75.03797 Y65.06183
G01 X75.06441 Y65.07204
G01 X75.58364 Y65.28710
G01 X75.93830 Y65.28710
G01 X77.85935 Y67.20818
G01 X78.28094 Y67.62977
G01 X78.28094 Y72.10200
G01 X78.20906 Y72.16100
G01 X78.14111 Y72.22892
G01 X78.03542 Y72.35773
G01 X77.98206 Y72.43758
G01 X77.90349 Y72.58455
G01 X77.86674 Y72.67330
G01 X77.85092 Y72.72534
G01 X77.85092 Y73.55620
G01 X77.83514 Y73.60832
G01 X77.79839 Y73.69707
G01 X77.71983 Y73.84403
G01 X77.66646 Y73.92389
G01 X77.56075 Y74.05269
G01 X77.49283 Y74.12064
G01 X77.36402 Y74.22633
G01 X77.28417 Y74.27969
G01 X77.13720 Y74.35826
G01 X77.04845 Y74.39501
G01 X76.99633 Y74.41083
G01 X76.16547 Y74.41083
G01 X76.11343 Y74.42661
G01 X76.02468 Y74.46336
G01 X75.87772 Y74.54192
G01 X75.79786 Y74.59529
G01 X75.72410 Y74.65582
G01 X75.66906 Y74.70100
G01 X75.60111 Y74.76892
G01 X75.49542 Y74.89773
G01 X75.44206 Y74.97758
G01 X75.36349 Y75.12455
G01 X75.32674 Y75.21330
G01 X75.31092 Y75.26534
G01 X75.31092 Y76.09620
G01 X75.29514 Y76.14832
G01 X75.25839 Y76.23707
G01 X75.17983 Y76.38403
G01 X75.12646 Y76.46389
G01 X75.02075 Y76.59269
G01 X74.95283 Y76.66064
G01 X74.88092 Y76.71964
G01 X74.88092 Y80.20539
G01 X74.92016 Y80.24463
G01 X74.95476 Y80.31776
G01 X74.99809 Y80.39896
G01 X75.08120 Y80.53762
G01 X75.12438 Y80.60234
G01 X75.21884 Y80.72967
G01 X75.26314 Y80.78367
G01 X75.36857 Y80.90003
G01 X75.41622 Y80.94768
G01 X75.44091 Y80.97003
G01 X75.56448 Y81.01425
G01 X75.62174 Y81.03165
G01 X75.77855 Y81.07094
G01 X75.82557 Y81.08032
G01 X75.98239 Y81.10358
G01 X76.02349 Y81.10765
G01 X76.18033 Y81.11534
G01 X76.21952 Y81.11534
G01 X76.37634 Y81.10765
G01 X76.41744 Y81.10358
G01 X76.57429 Y81.08032
G01 X76.62130 Y81.07094
G01 X76.77812 Y81.03165
G01 X76.83537 Y81.01425
G01 X76.99222 Y80.95812
G01 X77.06517 Y80.92784
G01 X77.22199 Y80.85365
G01 X77.27482 Y80.82532
G01 X77.29725 Y80.79175
G01 X77.37119 Y80.65344
G01 X77.40794 Y80.56470
G01 X77.45346 Y80.41463
G01 X77.47220 Y80.32042
G01 X77.48757 Y80.16434
G01 X77.48754 Y80.10788
G01 X77.47185 Y80.06988
G01 X77.40065 Y79.91928
G01 X77.36148 Y79.84593
G01 X77.27835 Y79.70722
G01 X77.23979 Y79.64943
G01 X77.14535 Y79.52210
G01 X77.10603 Y79.47417
G01 X77.00057 Y79.35781
G01 X76.95844 Y79.31568
G01 X76.84208 Y79.21027
G01 X76.79415 Y79.17090
G01 X76.66682 Y79.07648
G01 X76.60903 Y79.03790
G01 X76.47035 Y78.95477
G01 X76.39697 Y78.91563
G01 X76.24640 Y78.84440
G01 X76.20830 Y78.82868
G01 X76.15191 Y78.82868
G01 X75.99583 Y78.84405
G01 X75.90162 Y78.86279
G01 X75.75155 Y78.90831
G01 X75.71927 Y78.92170
G01 X75.66281 Y78.94509
G01 X75.52450 Y79.01900
G01 X75.44462 Y79.07237
G01 X75.32339 Y79.17186
G01 X75.25547 Y79.23981
G01 X75.15598 Y79.36101
G01 X75.10261 Y79.44087
G01 X75.02870 Y79.57918
G01 X74.99194 Y79.66792
G01 X74.94640 Y79.81801
G01 X74.92768 Y79.91222
G01 X74.91229 Y80.06828
G01 X74.91229 Y80.16434
G01 X74.92016 Y80.24463
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.77092 Y76.09620 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.77092 Y76.09620
G01 X72.78674 Y76.14832
G01 X72.82349 Y76.23707
G01 X72.90206 Y76.38403
G01 X72.95542 Y76.46389
G01 X73.06111 Y76.59269
G01 X73.12906 Y76.66064
G01 X73.20094 Y76.71962
G01 X73.20094 Y80.55332
G01 X73.20330 Y80.60135
G01 X73.21001 Y80.66965
G01 X73.22875 Y80.76386
G01 X73.24866 Y80.82952
G01 X73.28542 Y80.91826
G01 X73.31778 Y80.97877
G01 X73.37114 Y81.05862
G01 X73.41465 Y81.11166
G01 X73.44696 Y81.14730
G01 X74.55895 Y82.25928
G01 X74.59458 Y82.29159
G01 X74.64762 Y82.33510
G01 X74.72748 Y82.38847
G01 X74.78798 Y82.42083
G01 X74.87673 Y82.45758
G01 X74.94239 Y82.47749
G01 X75.03660 Y82.49624
G01 X75.10490 Y82.50294
G01 X75.15293 Y82.50531
G01 X78.17200 Y82.50531
G01 X78.20197 Y82.54186
G01 X78.26989 Y82.60978
G01 X78.39112 Y82.70927
G01 X78.47101 Y82.76263
G01 X78.60931 Y82.83655
G01 X78.66659 Y82.86032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X75.66347 Y85.55630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X75.66347 Y85.55630
G01 X80.05099 Y85.55633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.44281 Y87.17258 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.44281 Y87.17258
G01 X78.44413 Y87.16321
G01 X80.05099 Y85.55633
G01 X80.10326 Y85.53466
G01 X80.14832 Y85.51729
G01 X80.21693 Y85.49273
G01 X80.29813 Y85.46801
G01 X80.36673 Y85.45084
G01 X80.44065 Y85.43611
G01 X80.50925 Y85.42593
G01 X80.57905 Y85.41904
G01 X80.64768 Y85.41566
G01 X80.68195 Y85.41483
G01 X83.20729 Y85.41483
G01 X83.25291 Y85.39324
G01 X83.31446 Y85.36768
G01 X83.47128 Y85.31157
G01 X83.51796 Y85.29738
G01 X83.67478 Y85.25811
G01 X83.71161 Y85.25074
G01 X83.86845 Y85.22747
G01 X83.89977 Y85.22438
G01 X84.05659 Y85.21668
G01 X84.08608 Y85.21668
G01 X84.24288 Y85.22438
G01 X84.27419 Y85.22747
G01 X84.43104 Y85.25074
G01 X84.46787 Y85.25811
G01 X84.62469 Y85.29738
G01 X84.67137 Y85.31157
G01 X84.82819 Y85.36768
G01 X84.88974 Y85.39324
G01 X85.04656 Y85.46743
G01 X85.12946 Y85.51188
G01 X85.19195 Y85.54932
G01 X85.18882 Y85.65795
G01 X85.19078 Y85.73791
G01 X85.19093 Y85.74477
G01 X85.19212 Y85.81813
G01 X85.19870 Y85.90632
G01 X85.20195 Y85.93050
G01 X85.20350 Y85.94274
G01 X85.20521 Y85.95729
G01 X85.20711 Y85.97563
G01 X85.22128 Y86.13182
G01 X85.22354 Y86.16626
G01 X85.22304 Y86.17685
G01 X85.22167 Y86.20088
G01 X85.22113 Y86.26984
G01 X85.22428 Y86.34767
G01 X85.22481 Y86.35879
G01 X85.22906 Y86.43558
G01 X85.24699 Y86.57032
G01 X85.25463 Y86.60720
G01 X85.26312 Y86.65381
G01 X85.24259 Y86.70344
G01 X85.24209 Y86.70433
G01 X85.20790 Y86.72483
G01 X85.09576 Y86.80276
G01 X85.08384 Y86.81238
G01 X85.03205 Y86.85099
G01 X85.03053 Y86.85206
G01 X84.91496 Y86.94967
G01 X84.90937 Y86.95551
G01 X84.90129 Y86.96377
G01 X84.87673 Y86.98851
G01 X84.86050 Y87.00433
G01 X84.85100 Y87.01332
G01 X84.73868 Y87.10311
G01 X84.70150 Y87.13087
G01 X84.68174 Y87.14190
G01 X84.54361 Y87.21619
G01 X84.53404 Y87.22125
G01 X84.47938 Y87.24147
G01 X84.35385 Y87.28203
G01 X84.32952 Y87.28772
G01 X84.26177 Y87.30011
G01 X84.16635 Y87.31276
G01 X84.10574 Y87.31574
G01 X84.03693 Y87.31574
G01 X83.97630 Y87.31276
G01 X83.88088 Y87.30011
G01 X83.81313 Y87.28772
G01 X83.78880 Y87.28203
G01 X83.66327 Y87.24147
G01 X83.60861 Y87.22125
G01 X83.59904 Y87.21619
G01 X83.46091 Y87.14190
G01 X83.44115 Y87.13087
G01 X83.40396 Y87.10311
G01 X83.29165 Y87.01332
G01 X83.28215 Y87.00433
G01 X83.26592 Y86.98851
G01 X83.23323 Y86.95556
G01 X83.18489 Y86.91114
G01 X83.13721 Y86.87113
G01 X83.11280 Y86.85150
G01 X83.10468 Y86.84523
G01 X82.99045 Y86.83070
G01 X82.97084 Y86.82973
G01 X82.93475 Y86.82884
G01 X81.12757 Y86.82884
G01 X81.01182 Y86.83799
G01 X80.98393 Y86.84241
G01 X80.95474 Y86.86029
G01 X80.84118 Y86.94599
G01 X80.82978 Y86.95653
G01 X80.80989 Y86.97566
G01 X78.65475 Y89.13079
G01 X78.58249 Y89.21550
G01 X78.54609 Y89.26562
G01 X78.54261 Y89.27044
G01 X78.52432 Y89.40539
G01 X78.52371 Y89.42094
G01 X78.52318 Y89.44845
G01 X78.52318 Y91.15195
G01 X78.53197 Y91.26282
G01 X78.54164 Y91.32401
G01 X78.62610 Y91.57684
G01 X78.65726 Y91.63800
G01 X78.66293 Y91.64699
G01 X78.66293 Y92.06985
G01 X78.60824 Y92.22271
G01 X78.58307 Y92.30552
G01 X78.54378 Y92.46233
G01 X78.52955 Y92.53368
G01 X78.52115 Y92.59030
G01 X78.51530 Y92.62406
G01 X78.50232 Y92.68931
G01 X78.50184 Y92.69170
G01 X78.48965 Y92.75421
G01 X78.48917 Y92.75657
G01 X78.47573 Y92.82418
G01 X78.45889 Y92.89134
G01 X78.45376 Y92.90826
G01 X78.44027 Y92.95916
G01 X78.43547 Y92.98019
G01 X78.42054 Y93.03645
G01 X78.39897 Y93.10752
G01 X78.38759 Y93.14250
G01 X78.38437 Y93.15177
G01 X78.35785 Y93.24120
G01 X78.35714 Y93.24402
G01 X78.40194 Y93.39170
G01 X78.43870 Y93.48044
G01 X78.51261 Y93.61875
G01 X78.52224 Y93.63312
G01 X78.56598 Y93.69863
G01 X78.66547 Y93.81986
G01 X78.73339 Y93.88778
G01 X78.85462 Y93.98727
G01 X78.93450 Y94.04064
G01 X79.07281 Y94.11455
G01 X79.16156 Y94.15131
G01 X79.31162 Y94.19685
G01 X79.39440 Y94.21331
G01 X80.62541 Y94.21331
G01 X80.70824 Y94.22979
G01 X80.85833 Y94.27531
G01 X80.94707 Y94.31206
G01 X81.08538 Y94.38600
G01 X81.16523 Y94.43937
G01 X81.28647 Y94.53886
G01 X81.35439 Y94.60678
G01 X81.45388 Y94.72801
G01 X81.50725 Y94.80787
G01 X81.58118 Y94.94618
G01 X81.61794 Y95.03492
G01 X81.66346 Y95.18501
G01 X81.68220 Y95.27922
G01 X81.68771 Y95.33505
G01 X81.69757 Y95.43528
G01 X81.69757 Y95.53134
G01 X81.68220 Y95.68742
G01 X81.66346 Y95.78163
G01 X81.61794 Y95.93170
G01 X81.58118 Y96.02044
G01 X81.50725 Y96.15875
G01 X81.45388 Y96.23863
G01 X81.35439 Y96.35986
G01 X81.28647 Y96.42778
G01 X81.16523 Y96.52727
G01 X81.08538 Y96.58064
G01 X80.94707 Y96.65455
G01 X80.85833 Y96.69131
G01 X80.70824 Y96.73685
G01 X80.62541 Y96.75331
G01 X79.39440 Y96.75333
G01 X79.31162 Y96.76979
G01 X79.16156 Y96.81531
G01 X79.07281 Y96.85206
G01 X78.93450 Y96.92600
G01 X78.85462 Y96.97937
G01 X78.73339 Y97.07886
G01 X78.66547 Y97.14678
G01 X78.56598 Y97.26801
G01 X78.51261 Y97.34787
G01 X78.43870 Y97.48618
G01 X78.40194 Y97.57492
G01 X78.35640 Y97.72501
G01 X78.33768 Y97.81922
G01 X78.32229 Y97.97528
G01 X78.32229 Y98.07134
G01 X78.33768 Y98.22742
G01 X78.35640 Y98.32163
G01 X78.40194 Y98.47170
G01 X78.43870 Y98.56044
G01 X78.51261 Y98.69875
G01 X78.56598 Y98.77863
G01 X78.66547 Y98.89986
G01 X78.73339 Y98.96778
G01 X78.85462 Y99.06727
G01 X78.93450 Y99.12064
G01 X79.07281 Y99.19455
G01 X79.16156 Y99.23131
G01 X79.31162 Y99.27685
G01 X79.39440 Y99.29331
G01 X80.62541 Y99.29331
G01 X80.70824 Y99.30979
G01 X80.80006 Y99.33763
G01 X80.84629 Y99.39514
G01 X80.90775 Y99.46555
G01 X80.98616 Y99.54406
G01 X81.02536 Y99.57822
G01 X81.03341 Y99.58533
G01 X81.07816 Y99.62546
G01 X81.11786 Y99.65851
G01 X81.15695 Y99.68871
G01 X81.19836 Y99.72623
G01 X81.24702 Y99.77489
G01 X81.28454 Y99.81632
G01 X81.34634 Y99.89628
G01 X81.38573 Y99.95285
G01 X81.39140 Y99.96186
G01 X81.45904 Y100.09148
G01 X81.47425 Y100.12247
G01 X81.48540 Y100.15511
G01 X81.52922 Y100.29460
G01 X81.53160 Y100.30499
G01 X81.54372 Y100.37289
G01 X81.55660 Y100.47309
G01 X81.55934 Y100.52892
G01 X81.55934 Y100.59773
G01 X81.55660 Y100.65358
G01 X81.54372 Y100.75378
G01 X81.53160 Y100.82170
G01 X81.52922 Y100.83204
G01 X81.48540 Y100.97156
G01 X81.47425 Y101.00418
G01 X81.45904 Y101.03516
G01 X81.39140 Y101.16478
G01 X81.38573 Y101.17380
G01 X81.34634 Y101.23036
G01 X81.28454 Y101.31032
G01 X81.24702 Y101.35175
G01 X81.19836 Y101.40042
G01 X81.15693 Y101.43796
G01 X81.07697 Y101.49973
G01 X81.02043 Y101.53913
G01 X81.01136 Y101.54479
G01 X80.88180 Y101.61243
G01 X80.85081 Y101.62765
G01 X80.81809 Y101.63882
G01 X80.67865 Y101.68261
G01 X80.66821 Y101.68500
G01 X80.60036 Y101.69711
G01 X80.50016 Y101.70999
G01 X80.44433 Y101.71274
G01 X80.40994 Y101.71357
G01 X80.03605 Y101.71357
G01 X79.92518 Y101.72236
G01 X79.86399 Y101.73204
G01 X79.85802 Y101.73300
G01 X79.74939 Y101.81578
G01 X79.73796 Y101.82635
G01 X79.71840 Y101.84517
G01 X79.08007 Y102.48347
G01 X79.05518 Y102.50720
G01 X79.02970 Y102.53029
G01 X79.00214 Y102.55073
G01 X78.94487 Y102.58901
G01 X78.91543 Y102.60664
G01 X78.88437 Y102.62132
G01 X78.82076 Y102.64766
G01 X78.78843 Y102.65922
G01 X78.75510 Y102.66757
G01 X78.68767 Y102.68101
G01 X78.65363 Y102.68604
G01 X78.61939 Y102.68774
G01 X78.58495 Y102.68858
G01 X61.82092 Y102.68858
G01 X61.78651 Y102.68774
G01 X61.75224 Y102.68604
G01 X61.71821 Y102.68101
G01 X61.65074 Y102.66757
G01 X61.61739 Y102.65922
G01 X61.58509 Y102.64766
G01 X61.52148 Y102.62132
G01 X61.49042 Y102.60664
G01 X61.46098 Y102.58901
G01 X61.40370 Y102.55073
G01 X61.37615 Y102.53029
G01 X61.35067 Y102.50720
G01 X61.32578 Y102.48347
G01 X56.07445 Y97.23215
G01 X55.98974 Y97.15989
G01 X55.93963 Y97.12346
G01 X55.93483 Y97.12001
G01 X55.79985 Y97.10172
G01 X55.78431 Y97.10111
G01 X55.75678 Y97.10058
G01 X54.29605 Y97.10058
G01 X54.18518 Y97.10937
G01 X54.12399 Y97.11904
G01 X54.11802 Y97.12001
G01 X54.00969 Y97.20248
G01 X53.99828 Y97.21302
G01 X53.97840 Y97.23215
G01 X48.47307 Y102.73747
G01 X48.44818 Y102.76120
G01 X48.42270 Y102.78426
G01 X48.39514 Y102.80473
G01 X48.33787 Y102.84298
G01 X48.30843 Y102.86064
G01 X48.27737 Y102.87532
G01 X48.27416 Y102.87682
G01 X48.21465 Y102.90460
G01 X48.17323 Y102.92559
G01 X48.15273 Y102.93679
G01 X48.11773 Y102.95480
G01 X48.08420 Y102.97092
G01 X48.01872 Y103.00608
G01 X47.97792 Y103.03021
G01 X47.90246 Y103.08230
G01 X36.94922 Y103.08230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.96316 Y101.13326 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.96316 Y101.13326
G01 X37.12199 Y101.08510
G01 X37.21071 Y101.04832
G01 X37.38361 Y100.95592
G01 X37.42039 Y100.93136
G01 X37.46347 Y100.90255
G01 X37.61500 Y100.77819
G01 X37.68295 Y100.71027
G01 X37.80731 Y100.55874
G01 X37.84703 Y100.49920
G01 X37.84703 Y97.97073
G01 X37.84706 Y97.91559
G01 X37.84703 Y97.71074
G01 X37.84703 Y97.38536
G01 X37.80731 Y97.32590
G01 X37.72229 Y97.22232
G01 X37.67474 Y97.18110
G01 X37.60802 Y97.11493
G01 X37.55270 Y97.05526
G01 X37.46697 Y96.98496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.49974 Y96.95359 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.49974 Y96.95359
G01 X37.52181 Y97.00243
G01 X37.55270 Y97.05526
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.84703 Y97.38536 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.84703 Y97.38536
G01 X37.88681 Y97.32590
G01 X37.90736 Y97.30083
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.72229 Y97.22232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.72229 Y97.22232
G01 X37.72941 Y97.22849
G01 X37.77901 Y97.25674
G01 X37.83504 Y97.28130
G01 X37.90253 Y97.30281
G01 X37.90736 Y97.30083
G01 X37.90738 Y97.30083
G01 X38.07990 Y97.23073
G01 X38.11444 Y97.21178
G01 X38.15033 Y97.19324
G01 X38.17083 Y97.18331
G01 X38.28869 Y97.11198
G01 X38.29864 Y97.10457
G01 X38.31576 Y97.09141
G01 X38.31853 Y97.08920
G01 X38.34609 Y97.06842
G01 X38.37578 Y97.05095
G01 X38.39750 Y97.03888
G01 X38.50009 Y96.98186
G01 X38.54881 Y96.95882
G01 X38.61246 Y96.93246
G01 X38.63260 Y96.92524
G01 X38.66321 Y96.91429
G01 X38.79996 Y96.87525
G01 X38.83334 Y96.86659
G01 X38.86753 Y96.86182
G01 X39.00875 Y96.84556
G01 X39.06268 Y96.84292
G01 X39.13146 Y96.84292
G01 X39.18533 Y96.84556
G01 X39.32656 Y96.86182
G01 X39.36075 Y96.86659
G01 X39.39412 Y96.87525
G01 X39.53088 Y96.91429
G01 X39.58162 Y96.93246
G01 X39.64528 Y96.95882
G01 X39.66019 Y96.96588
G01 X39.69402 Y96.98188
G01 X39.81830 Y97.05095
G01 X39.84893 Y97.06901
G01 X39.87639 Y97.08818
G01 X39.93438 Y97.12463
G01 X39.98846 Y97.15516
G01 X40.04957 Y97.18618
G01 X40.12617 Y97.22090
G01 X40.25008 Y97.26743
G01 X40.26242 Y97.27122
G01 X40.31078 Y97.25689
G01 X40.40237 Y97.21930
G01 X40.48457 Y97.16403
G01 X40.49851 Y97.15244
G01 X40.52462 Y97.12864
G01 X40.53191 Y97.12202
G01 X40.59930 Y97.05460
G01 X40.75632 Y96.93411
G01 X40.75703 Y96.93370
G01 X40.75703 Y96.96443
G01 X40.73064 Y96.98206
G01 X40.57911 Y97.10642
G01 X40.51116 Y97.17436
G01 X40.38680 Y97.32590
G01 X40.34705 Y97.38539
G01 X40.34705 Y100.49922
G01 X40.30730 Y100.55874
G01 X40.18294 Y100.71027
G01 X40.11502 Y100.77819
G01 X39.96349 Y100.90255
G01 X39.92038 Y100.93136
G01 X39.88360 Y100.95592
G01 X39.71073 Y101.04832
G01 X39.62198 Y101.08510
G01 X39.43438 Y101.14200
G01 X39.34017 Y101.16074
G01 X39.14507 Y101.17994
G01 X39.04904 Y101.17994
G01 X38.85394 Y101.16074
G01 X38.75973 Y101.14200
G01 X38.57213 Y101.08510
G01 X38.48338 Y101.04832
G01 X38.31051 Y100.95592
G01 X38.23062 Y100.90255
G01 X38.09204 Y100.78881
G01 X38.07909 Y100.77819
G01 X38.01117 Y100.71027
G01 X37.88681 Y100.55874
G01 X37.84703 Y100.49920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X44.66505 Y101.40232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X44.66505 Y101.40232
G01 X44.40968 Y101.14690
G01 X44.34019 Y101.16074
G01 X44.14509 Y101.17994
G01 X44.04903 Y101.17994
G01 X43.85393 Y101.16074
G01 X43.75972 Y101.14200
G01 X43.57214 Y101.08510
G01 X43.48339 Y101.04832
G01 X43.31050 Y100.95592
G01 X43.23064 Y100.90255
G01 X43.09206 Y100.78884
G01 X43.07910 Y100.77819
G01 X43.01118 Y100.71027
G01 X42.88680 Y100.55874
G01 X42.84705 Y100.49922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.34705 Y100.49922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.34705 Y100.49922
G01 X40.38680 Y100.55874
G01 X40.51116 Y100.71027
G01 X40.57911 Y100.77819
G01 X40.59204 Y100.78881
G01 X40.73064 Y100.90255
G01 X40.81050 Y100.95592
G01 X40.98340 Y101.04832
G01 X41.07212 Y101.08510
G01 X41.25973 Y101.14200
G01 X41.35393 Y101.16074
G01 X41.54903 Y101.17994
G01 X41.64509 Y101.17994
G01 X41.84017 Y101.16074
G01 X41.93438 Y101.14200
G01 X42.12198 Y101.08510
G01 X42.21073 Y101.04832
G01 X42.38360 Y100.95592
G01 X42.42038 Y100.93136
G01 X42.46348 Y100.90255
G01 X42.61502 Y100.77819
G01 X42.68294 Y100.71027
G01 X42.80730 Y100.55874
G01 X42.84705 Y100.49922
G01 X42.84705 Y97.38539
G01 X42.88680 Y97.32590
G01 X42.93544 Y97.26662
G01 X42.93547 Y97.26659
G01 X43.06739 Y97.22054
G01 X43.12495 Y97.19296
G01 X43.14316 Y97.18450
G01 X43.18273 Y97.16672
G01 X43.31187 Y97.09248
G01 X43.31774 Y97.08826
G01 X43.32663 Y97.08193
G01 X43.34532 Y97.06890
G01 X43.37580 Y97.05095
G01 X43.50011 Y96.98186
G01 X43.54885 Y96.95882
G01 X43.61245 Y96.93246
G01 X43.66323 Y96.91429
G01 X43.79995 Y96.87525
G01 X43.83336 Y96.86659
G01 X43.86752 Y96.86182
G01 X44.00877 Y96.84556
G01 X44.06267 Y96.84292
G01 X44.13142 Y96.84292
G01 X44.18532 Y96.84556
G01 X44.32657 Y96.86182
G01 X44.36074 Y96.86659
G01 X44.39414 Y96.87525
G01 X44.53087 Y96.91429
G01 X44.58164 Y96.93246
G01 X44.64524 Y96.95882
G01 X44.69401 Y96.98188
G01 X44.81829 Y97.05095
G01 X44.84798 Y97.06842
G01 X44.87554 Y97.08922
G01 X44.98695 Y97.17764
G01 X45.02688 Y97.21381
G01 X45.02893 Y97.21567
G01 X45.07801 Y97.26050
G01 X45.11255 Y97.29011
G01 X45.16127 Y97.32930
G01 X45.23729 Y97.38338
G01 X45.31326 Y97.43111
G01 X45.34704 Y97.45143
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.93544 Y97.26662 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.93544 Y97.26662
G01 X42.92228 Y97.27122
G01 X42.84065 Y97.23985
G01 X42.78614 Y97.21206
G01 X42.72066 Y97.17193
G01 X42.66224 Y97.12204
G01 X42.59480 Y97.05463
G01 X42.43775 Y96.93411
G01 X42.43704 Y96.93370
G01 X42.43704 Y96.96441
G01 X42.46348 Y96.98206
G01 X42.61502 Y97.10642
G01 X42.65515 Y97.14658
G01 X42.68294 Y97.17436
G01 X42.80730 Y97.32590
G01 X42.84705 Y97.38539
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X40.34705 Y97.38539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X40.34705 Y97.38539
G01 X40.30730 Y97.32590
G01 X40.26242 Y97.27122
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.40081 Y91.71085 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.40081 Y91.71085
G01 X36.40307 Y91.70874
G01 X36.55603 Y91.69368
G01 X36.65209 Y91.69368
G01 X36.80286 Y91.70844
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.88265 Y91.27130 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.88265 Y91.27130
G01 X36.32562 Y91.27130
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.31694 Y100.43120 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.31694 Y100.43120
G01 X24.35074 Y100.45157
G01 X24.42669 Y100.49928
G01 X24.50261 Y100.55328
G01 X24.55130 Y100.59244
G01 X24.58597 Y100.62216
G01 X24.63515 Y100.66707
G01 X24.63710 Y100.66885
G01 X24.67706 Y100.70507
G01 X24.78844 Y100.79343
G01 X24.81594 Y100.81421
G01 X24.84569 Y100.83171
G01 X24.96999 Y100.90077
G01 X25.01871 Y100.92384
G01 X25.08229 Y100.95018
G01 X25.13309 Y100.96834
G01 X25.26982 Y101.00738
G01 X25.30322 Y101.01604
G01 X25.33741 Y101.02084
G01 X25.47868 Y101.03710
G01 X25.53255 Y101.03974
G01 X25.60134 Y101.03974
G01 X25.65519 Y101.03710
G01 X25.79643 Y101.02084
G01 X25.83065 Y101.01604
G01 X25.86402 Y101.00740
G01 X25.92854 Y100.98899
G01 X26.00075 Y100.96836
G01 X26.05155 Y100.95018
G01 X26.11510 Y100.92386
G01 X26.16385 Y100.90080
G01 X26.28815 Y100.83171
G01 X26.31782 Y100.81426
G01 X26.34543 Y100.79343
G01 X26.45681 Y100.70504
G01 X26.49676 Y100.66885
G01 X26.54543 Y100.62015
G01 X26.58165 Y100.58023
G01 X26.67004 Y100.46882
G01 X26.69082 Y100.44129
G01 X26.70832 Y100.41154
G01 X26.77738 Y100.28726
G01 X26.80045 Y100.23849
G01 X26.81706 Y100.20055
G01 X26.82679 Y100.17492
G01 X26.84495 Y100.12414
G01 X26.88399 Y99.98741
G01 X26.89265 Y99.95404
G01 X26.89742 Y99.91988
G01 X26.91368 Y99.77860
G01 X26.91632 Y99.72475
G01 X26.91716 Y99.69031
G01 X26.91716 Y98.19034
G01 X26.91632 Y98.15590
G01 X26.91368 Y98.10205
G01 X26.89742 Y97.96077
G01 X26.89265 Y97.92661
G01 X26.88399 Y97.89324
G01 X26.84495 Y97.75651
G01 X26.82679 Y97.70573
G01 X26.81823 Y97.68303
G01 X26.80045 Y97.64216
G01 X26.77743 Y97.59349
G01 X26.70832 Y97.46911
G01 X26.69082 Y97.43936
G01 X26.67004 Y97.41183
G01 X26.58165 Y97.30043
G01 X26.54543 Y97.26050
G01 X26.49676 Y97.21180
G01 X26.45681 Y97.17558
G01 X26.34543 Y97.08719
G01 X26.32135 Y97.06890
G01 X26.31383 Y97.06347
G01 X26.30964 Y97.06045
G01 X26.28963 Y97.04615
G01 X26.21223 Y96.98237
G01 X26.16608 Y96.93888
G01 X26.13898 Y96.91211
G01 X26.07667 Y96.84770
G01 X26.01813 Y96.77518
G01 X25.90426 Y96.74063
G01 X25.81005 Y96.72189
G01 X25.61498 Y96.70266
G01 X25.51891 Y96.70266
G01 X25.32382 Y96.72189
G01 X25.22961 Y96.74063
G01 X25.04200 Y96.79753
G01 X24.95328 Y96.83428
G01 X24.78038 Y96.92669
G01 X24.70053 Y96.98008
G01 X24.54899 Y97.10444
G01 X24.48104 Y97.17236
G01 X24.35669 Y97.32389
G01 X24.31694 Y97.38336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.01813 Y96.77518 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.01813 Y96.77518
G01 X26.01279 Y96.76855
G01 X26.01091 Y96.69613
G01 X26.01571 Y96.63515
G01 X26.02153 Y96.60373
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.48292 Y95.70871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.48292 Y95.70871
G01 X24.49875 Y95.76083
G01 X24.53550 Y95.84958
G01 X24.61404 Y95.99654
G01 X24.66740 Y96.07640
G01 X24.72793 Y96.15014
G01 X24.77312 Y96.20520
G01 X24.84104 Y96.27312
G01 X24.96984 Y96.37884
G01 X25.04973 Y96.43220
G01 X25.19666 Y96.51074
G01 X25.28541 Y96.54752
G01 X25.44487 Y96.59588
G01 X25.53908 Y96.61463
G01 X25.70492 Y96.63096
G01 X25.80096 Y96.63096
G01 X25.96679 Y96.61463
G01 X26.02153 Y96.60373
G01 X26.05308 Y96.56992
G01 X26.19034 Y96.44833
G01 X26.21752 Y96.42885
G01 X26.25158 Y96.40299
G01 X26.26697 Y96.39062
G01 X26.36006 Y96.32700
G01 X26.39054 Y96.30952
G01 X26.44858 Y96.27239
G01 X26.45892 Y96.26502
G01 X26.57700 Y96.16616
G01 X26.60294 Y96.14335
G01 X26.62577 Y96.11739
G01 X26.70629 Y96.02120
G01 X26.72463 Y95.99931
G01 X26.73197 Y95.98900
G01 X26.76910 Y95.93098
G01 X26.82234 Y95.83807
G01 X26.84787 Y95.78412
G01 X26.87421 Y95.72049
G01 X26.89435 Y95.66421
G01 X26.92237 Y95.56098
G01 X26.93715 Y95.49367
G01 X26.93923 Y95.48123
G01 X26.95282 Y95.32778
G01 X26.95503 Y95.29332
G01 X26.95282 Y95.25887
G01 X26.93923 Y95.10543
G01 X26.93715 Y95.09296
G01 X26.92237 Y95.02565
G01 X26.89435 Y94.92245
G01 X26.87421 Y94.86614
G01 X26.84784 Y94.80249
G01 X26.82229 Y94.74846
G01 X26.76910 Y94.65565
G01 X26.73197 Y94.59766
G01 X26.72463 Y94.58735
G01 X26.62577 Y94.46926
G01 X26.60243 Y94.44275
G01 X26.57903 Y94.42060
G01 X26.57784 Y94.41948
G01 X26.56207 Y94.40460
G01 X26.47728 Y94.30922
G01 X26.47164 Y94.27793
G01 X26.46197 Y94.21674
G01 X26.45318 Y94.10587
G01 X26.45318 Y93.06647
G01 X26.45371 Y93.03894
G01 X26.45432 Y93.02340
G01 X26.47261 Y92.88842
G01 X26.47606 Y92.88362
G01 X26.51249 Y92.83351
G01 X26.58475 Y92.74880
G01 X28.07040 Y91.26315
G01 X28.09028 Y91.24402
G01 X28.10169 Y91.23348
G01 X28.21002 Y91.15101
G01 X28.21599 Y91.15004
G01 X28.27718 Y91.14037
G01 X28.38805 Y91.13158
G01 X35.83129 Y91.13158
G01 X35.85443 Y91.13196
G01 X35.86751 Y91.13239
G01 X36.00353 Y91.15007
G01 X36.06471 Y91.16396
G01 X36.32562 Y91.27130
G01 X36.32799 Y91.27229
G01 X36.33048 Y91.27593
G01 X36.35958 Y91.32972
G01 X36.39865 Y91.42436
G01 X36.41717 Y91.52505
G01 X36.41437 Y91.62739
G01 X36.40632 Y91.68804
G01 X36.40081 Y91.71085
G01 X36.40020 Y91.71143
G01 X36.32242 Y91.78301
G01 X36.19232 Y91.88222
G01 X36.18923 Y91.88413
G01 X36.14018 Y91.91707
G01 X36.12862 Y91.92551
G01 X36.04612 Y91.97750
G01 X36.01666 Y91.99337
G01 X35.99370 Y92.00572
G01 X35.97383 Y92.01682
G01 X35.96334 Y92.02426
G01 X35.93670 Y92.04453
G01 X35.82435 Y92.13434
G01 X35.81486 Y92.14331
G01 X35.76713 Y92.19304
G01 X35.69616 Y92.27468
G01 X35.66731 Y92.31400
G01 X35.62938 Y92.37140
G01 X35.59238 Y92.43384
G01 X35.55552 Y92.50976
G01 X35.52850 Y92.57313
G01 X35.51572 Y92.60770
G01 X35.48755 Y92.70902
G01 X35.48354 Y92.72340
G01 X35.46835 Y92.79071
G01 X35.46817 Y92.79177
G01 X35.45410 Y92.94687
G01 X35.45184 Y92.98133
G01 X35.45410 Y93.01578
G01 X35.46817 Y93.17089
G01 X35.46835 Y93.17196
G01 X35.48354 Y93.23927
G01 X35.51572 Y93.35492
G01 X35.52850 Y93.38951
G01 X35.55552 Y93.45288
G01 X35.59238 Y93.52880
G01 X35.62938 Y93.59124
G01 X35.66731 Y93.64864
G01 X35.69616 Y93.68796
G01 X35.76713 Y93.76960
G01 X35.81486 Y93.81933
G01 X35.82435 Y93.82832
G01 X35.93670 Y93.91811
G01 X35.97388 Y93.94587
G01 X35.99365 Y93.95690
G01 X36.13177 Y94.03119
G01 X36.14130 Y94.03625
G01 X36.19598 Y94.05646
G01 X36.26377 Y94.07836
G01 X36.34371 Y94.10965
G01 X36.36245 Y94.11831
G01 X36.41125 Y94.13884
G01 X36.41755 Y94.14122
G01 X36.56159 Y94.21260
G01 X36.60375 Y94.23848
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.60434 Y94.77216 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.60434 Y94.77216
G01 X36.64650 Y94.79804
G01 X36.79042 Y94.86937
G01 X36.79682 Y94.87180
G01 X36.84554 Y94.89228
G01 X36.86438 Y94.90101
G01 X36.94429 Y94.93228
G01 X37.01216 Y94.95423
G01 X37.06677 Y94.97442
G01 X37.07630 Y94.97945
G01 X37.21440 Y95.05372
G01 X37.23423 Y95.06479
G01 X37.27139 Y95.09253
G01 X37.38374 Y95.18232
G01 X37.39324 Y95.19131
G01 X37.44096 Y95.24104
G01 X37.51193 Y95.32268
G01 X37.54079 Y95.36200
G01 X37.57873 Y95.41945
G01 X37.61569 Y95.48184
G01 X37.65257 Y95.55781
G01 X37.67957 Y95.62108
G01 X37.69235 Y95.65570
G01 X37.72453 Y95.77135
G01 X37.73974 Y95.83868
G01 X37.73992 Y95.83977
G01 X37.75399 Y95.99487
G01 X37.75625 Y96.02933
G01 X37.75399 Y96.06378
G01 X37.73992 Y96.21887
G01 X37.73974 Y96.21996
G01 X37.72453 Y96.28732
G01 X37.69235 Y96.40292
G01 X37.67955 Y96.43756
G01 X37.65257 Y96.50083
G01 X37.62753 Y96.55242
G01 X37.59021 Y96.64533
G01 X37.58610 Y96.65803
G01 X37.56464 Y96.71623
G01 X37.56418 Y96.71734
G01 X37.51526 Y96.87856
G01 X37.49974 Y96.95356
G01 X37.49974 Y96.95359
G01 X37.49948 Y96.95488
G01 X37.48059 Y96.97378
G01 X37.46697 Y96.98496
G01 X37.46111 Y96.98496
G01 X37.35082 Y96.99016
G01 X37.29560 Y96.99560
G01 X37.21175 Y96.99984
G01 X37.12334 Y96.99984
G01 X37.06027 Y97.00286
G01 X37.03677 Y97.00520
G01 X36.98280 Y97.00789
G01 X36.85389 Y97.00789
G01 X36.81932 Y97.00926
G01 X36.81198 Y97.00985
G01 X36.77952 Y97.01117
G01 X36.62197 Y97.01117
G01 X36.61488 Y97.01109
G01 X36.58620 Y97.01056
G01 X36.57914 Y97.01048
G01 X36.42862 Y97.01048
G01 X36.38895 Y97.00853
G01 X36.38191 Y97.00782
G01 X36.33957 Y97.00576
G01 X36.22590 Y97.00576
G01 X36.17244 Y97.00309
G01 X36.13271 Y96.99918
G01 X36.06878 Y96.99611
G01 X35.99834 Y96.99611
G01 X35.91552 Y96.99192
G01 X35.84026 Y96.98450
G01 X35.79050 Y96.98079
G01 X35.76726 Y97.02674
G01 X35.67455 Y97.22278
G01 X35.64800 Y97.28668
G01 X35.57785 Y97.48272
G01 X35.56380 Y97.52892
G01 X35.51470 Y97.72494
G01 X35.50782 Y97.75948
G01 X35.47874 Y97.95552
G01 X35.47599 Y97.98341
G01 X35.46634 Y98.17944
G01 X35.46604 Y98.19232
G01 X35.46604 Y99.69234
G01 X35.46634 Y99.70522
G01 X35.47599 Y99.90126
G01 X35.47874 Y99.92915
G01 X35.50782 Y100.12516
G01 X35.50802 Y100.12648
G01 X35.52618 Y100.15356
G01 X35.64424 Y100.31276
G01 X35.66126 Y100.33352
G01 X35.79306 Y100.47893
G01 X35.81044 Y100.49630
G01 X35.95585 Y100.62810
G01 X35.97663 Y100.64512
G01 X36.13581 Y100.76318
G01 X36.16405 Y100.78205
G01 X36.33741 Y100.88594
G01 X36.37881 Y100.90804
G01 X36.56700 Y100.99704
G01 X36.62961 Y101.02290
G01 X36.83380 Y101.09597
G01 X36.92910 Y101.12473
G01 X36.96316 Y101.13326
G01 X37.23225 Y101.40232
G01 X44.66505 Y101.40232
G01 X45.34953 Y101.68584
G01 X45.36940 Y101.69351
G01 X45.43800 Y101.71807
G01 X45.47120 Y101.72815
G01 X45.53980 Y101.74532
G01 X45.56805 Y101.75096
G01 X45.63668 Y101.76115
G01 X45.66213 Y101.76366
G01 X45.73076 Y101.76704
G01 X45.74305 Y101.76732
G01 X47.53094 Y101.76732
G01 X47.54320 Y101.76704
G01 X47.61183 Y101.76366
G01 X47.63726 Y101.76115
G01 X47.70589 Y101.75096
G01 X47.73414 Y101.74532
G01 X47.76850 Y101.73674
G01 X47.79631 Y101.71611
G01 X47.81902 Y101.69747
G01 X47.86992 Y101.65134
G01 X47.88016 Y101.64159
G01 X48.83517 Y100.68658
G01 X48.84493 Y100.67634
G01 X48.89105 Y100.62544
G01 X48.90970 Y100.60273
G01 X48.95100 Y100.54700
G01 X48.96918 Y100.51977
G01 X49.00556 Y100.45909
G01 X49.02385 Y100.42480
G01 X49.05501 Y100.35892
G01 X49.06459 Y100.33733
G01 X49.32593 Y99.70636
G01 X49.32593 Y99.45498
G01 X49.32019 Y99.44512
G01 X49.28902 Y99.38394
G01 X49.20464 Y99.13126
G01 X49.19497 Y99.07007
G01 X49.18618 Y98.95920
G01 X49.18618 Y94.70320
G01 X49.18534 Y94.66876
G01 X49.18364 Y94.63449
G01 X49.17861 Y94.60048
G01 X49.16517 Y94.53304
G01 X49.15681 Y94.49969
G01 X49.14526 Y94.46739
G01 X49.11894 Y94.40378
G01 X49.10424 Y94.37269
G01 X49.08661 Y94.34328
G01 X49.04833 Y94.28600
G01 X49.02788 Y94.25844
G01 X49.00480 Y94.23297
G01 X48.98107 Y94.20808
G01 X48.90792 Y94.13490
G01 X48.04948 Y93.27646
G01 X48.04048 Y93.26729
G01 X48.03538 Y93.26200
G01 X47.95646 Y93.16406
G01 X47.92657 Y93.11951
G01 X47.92524 Y93.11077
G01 X47.91712 Y93.01608
G01 X47.91671 Y92.99609
G01 X47.91399 Y92.94687
G01 X47.89992 Y92.79177
G01 X47.89974 Y92.79068
G01 X47.88453 Y92.72335
G01 X47.85235 Y92.60770
G01 X47.83957 Y92.57308
G01 X47.81257 Y92.50981
G01 X47.77569 Y92.43384
G01 X47.73873 Y92.37145
G01 X47.70079 Y92.31400
G01 X47.67196 Y92.27470
G01 X47.60096 Y92.19304
G01 X47.58275 Y92.17293
G01 X47.56848 Y92.15771
G01 X47.56055 Y92.14943
G01 X47.55385 Y92.14252
G01 X47.48659 Y92.06241
G01 X47.48278 Y92.04059
G01 X47.47307 Y91.97940
G01 X47.46429 Y91.86838
G01 X47.46429 Y91.58916
G01 X47.46482 Y91.56160
G01 X47.46543 Y91.54608
G01 X47.48372 Y91.41116
G01 X47.48722 Y91.40630
G01 X47.52365 Y91.35616
G01 X47.59588 Y91.27151
G01 X53.31924 Y85.54815
G01 X53.33913 Y85.52902
G01 X53.35053 Y85.51848
G01 X53.45884 Y85.43601
G01 X53.46483 Y85.43504
G01 X53.52602 Y85.42537
G01 X53.63689 Y85.41658
G01 X75.18994 Y85.41658
G01 X75.24510 Y85.41876
G01 X75.27609 Y85.42120
G01 X75.44968 Y85.45623
G01 X75.51084 Y85.47609
G01 X75.66347 Y85.55630
G01 X75.70012 Y85.57558
G01 X75.73598 Y85.65610
G01 X75.75491 Y85.71429
G01 X75.77289 Y85.78909
G01 X75.77894 Y85.86580
G01 X75.77894 Y86.70433
G01 X77.87629 Y86.70433
G01 X77.99044 Y86.71782
G01 X78.03540 Y86.72859
G01 X78.12043 Y86.75742
G01 X78.19879 Y86.80128
G01 X78.24228 Y86.83748
G01 X78.26783 Y86.85871
G01 X78.31109 Y86.90200
G01 X78.37548 Y86.98157
G01 X78.42196 Y87.07281
G01 X78.44482 Y87.15818
G01 X78.44281 Y87.17258
G01 X78.42160 Y87.23789
G01 X78.30258 Y87.47629
G01 X78.26615 Y87.52638
G01 X78.19394 Y87.61099
G01 X77.32775 Y88.47720
G01 X77.30405 Y88.50209
G01 X77.28096 Y88.52754
G01 X77.26052 Y88.55513
G01 X77.22224 Y88.61241
G01 X77.20461 Y88.64182
G01 X77.18991 Y88.67291
G01 X77.16359 Y88.73651
G01 X77.15203 Y88.76879
G01 X77.14368 Y88.80217
G01 X77.13481 Y88.84253
G01 X77.12971 Y88.86956
G01 X77.11815 Y88.92048
G01 X77.11381 Y88.93694
G01 X77.10720 Y88.96381
G01 X77.10527 Y88.97232
G01 X77.02849 Y89.17824
G01 X76.99666 Y89.23943
G01 X76.98544 Y89.26044
G01 X77.04015 Y89.37611
G01 X77.07401 Y89.45757
G01 X77.13011 Y89.61439
G01 X77.14995 Y89.67964
G01 X77.18922 Y89.83646
G01 X77.20009 Y89.89097
G01 X77.22336 Y90.04781
G01 X77.22816 Y90.09627
G01 X77.23585 Y90.25309
G01 X77.23585 Y90.29955
G01 X77.22816 Y90.45640
G01 X77.22336 Y90.50488
G01 X77.20009 Y90.66170
G01 X77.18922 Y90.71619
G01 X77.14995 Y90.87301
G01 X77.13011 Y90.93826
G01 X77.07401 Y91.09508
G01 X77.04015 Y91.17654
G01 X76.98292 Y91.29754
G01 X76.97596 Y91.30326
G01 X76.94294 Y91.30529
G01 X76.84302 Y91.31304
G01 X76.70403 Y91.33534
G01 X76.68028 Y91.34128
G01 X76.64284 Y91.34966
G01 X76.60941 Y91.35622
G01 X76.53299 Y91.37572
G01 X76.53144 Y91.37621
G01 X76.52671 Y91.37773
G01 X76.48244 Y91.39203
G01 X76.45811 Y91.39772
G01 X76.39036 Y91.41011
G01 X76.29494 Y91.42276
G01 X76.23433 Y91.42574
G01 X76.16552 Y91.42574
G01 X76.10492 Y91.42276
G01 X76.00947 Y91.41011
G01 X75.94170 Y91.39772
G01 X75.91739 Y91.39203
G01 X75.79186 Y91.35147
G01 X75.73720 Y91.33125
G01 X75.72765 Y91.32619
G01 X75.58953 Y91.25190
G01 X75.56977 Y91.24085
G01 X75.53258 Y91.21311
G01 X75.42021 Y91.12330
G01 X75.41074 Y91.11436
G01 X75.36301 Y91.06460
G01 X75.29204 Y90.98296
G01 X75.26319 Y90.94364
G01 X75.22527 Y90.88624
G01 X75.18828 Y90.82381
G01 X75.15140 Y90.74789
G01 X75.12438 Y90.68451
G01 X75.11158 Y90.64984
G01 X75.07942 Y90.53427
G01 X75.06423 Y90.46696
G01 X75.06405 Y90.46589
G01 X75.04998 Y90.31078
G01 X75.04772 Y90.27633
G01 X75.04998 Y90.24187
G01 X75.06405 Y90.08672
G01 X75.06423 Y90.08568
G01 X75.07942 Y90.01840
G01 X75.11160 Y89.90270
G01 X75.12438 Y89.86813
G01 X75.15140 Y89.80476
G01 X75.18826 Y89.72884
G01 X75.22527 Y89.66640
G01 X75.26319 Y89.60900
G01 X75.29204 Y89.56968
G01 X75.36301 Y89.48805
G01 X75.41074 Y89.43829
G01 X75.42021 Y89.42935
G01 X75.53258 Y89.33953
G01 X75.56974 Y89.31179
G01 X75.58958 Y89.30072
G01 X75.72768 Y89.22645
G01 X75.73718 Y89.22142
G01 X75.79181 Y89.20123
G01 X75.91739 Y89.16064
G01 X75.94165 Y89.15495
G01 X76.00947 Y89.14255
G01 X76.10494 Y89.12988
G01 X76.16552 Y89.12691
G01 X76.23433 Y89.12691
G01 X76.29491 Y89.12988
G01 X76.39036 Y89.14255
G01 X76.45816 Y89.15495
G01 X76.48244 Y89.16064
G01 X76.54759 Y89.18170
G01 X76.60886 Y89.19849
G01 X76.65618 Y89.20920
G01 X76.67848 Y89.21461
G01 X76.71711 Y89.22462
G01 X76.83931 Y89.24642
G01 X76.93552 Y89.25637
G01 X76.98544 Y89.26044
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.66293 Y91.64702 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.66293 Y91.64702
G01 X78.66369 Y91.64821
G01 X78.74263 Y91.69376
G01 X78.84002 Y91.72538
G01 X78.94185 Y91.73607
G01 X79.00303 Y91.73607
G01 X79.08924 Y91.72843
G01 X79.16991 Y91.70651
G01 X79.16991 Y91.73277
G01 X79.16156 Y91.73531
G01 X79.07281 Y91.77206
G01 X78.93450 Y91.84600
G01 X78.85462 Y91.89937
G01 X78.73339 Y91.99886
G01 X78.66547 Y92.06678
G01 X78.66293 Y92.06985
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.98376 Y91.30956 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.98376 Y91.30956
G01 X76.97317 Y91.30343
G01 X76.94294 Y91.30529
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.98292 Y91.29754 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.98292 Y91.29754
G01 X76.98295 Y91.30798
G01 X76.98376 Y91.30956
G01 X76.98859 Y91.31883
G01 X77.01975 Y91.37999
G01 X77.10421 Y91.63282
G01 X77.11388 Y91.69401
G01 X77.12267 Y91.80488
G01 X77.12267 Y92.11418
G01 X77.12214 Y92.14171
G01 X77.12153 Y92.15726
G01 X77.10324 Y92.29223
G01 X77.09979 Y92.29703
G01 X77.06336 Y92.34715
G01 X76.99110 Y92.43185
G01 X74.77144 Y94.65148
G01 X74.75156 Y94.67061
G01 X74.74015 Y94.68115
G01 X74.63182 Y94.76365
G01 X74.62600 Y94.76459
G01 X74.56482 Y94.77429
G01 X74.45379 Y94.78308
G01 X73.90246 Y94.78308
G01 X73.87488 Y94.78255
G01 X73.85936 Y94.78194
G01 X73.71851 Y94.76225
G01 X73.70919 Y94.76002
G01 X73.66789 Y94.72677
G01 X73.62905 Y94.69324
G01 X73.58443 Y94.65184
G01 X73.57833 Y94.64623
G01 X73.56500 Y94.63414
G01 X73.53690 Y94.60869
G01 X73.49786 Y94.57851
G01 X73.45816 Y94.54547
G01 X73.41341 Y94.50533
G01 X73.40536 Y94.49822
G01 X73.36616 Y94.46406
G01 X73.28775 Y94.38555
G01 X73.22629 Y94.31514
G01 X73.18006 Y94.25763
G01 X73.08824 Y94.22979
G01 X73.00541 Y94.21331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.18046 Y94.16850 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.18046 Y94.16850
G01 X73.17899 Y94.18273
G01 X73.17899 Y94.24392
G01 X73.18049 Y94.25817
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X73.00541 Y96.75331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X73.00541 Y96.75331
G01 X73.08824 Y96.76979
G01 X73.23833 Y96.81531
G01 X73.32707 Y96.85206
G01 X73.46538 Y96.92600
G01 X73.54523 Y96.97937
G01 X73.66647 Y97.07886
G01 X73.73439 Y97.14678
G01 X73.83388 Y97.26801
G01 X73.88725 Y97.34787
G01 X73.96118 Y97.48618
G01 X73.99794 Y97.57492
G01 X74.04346 Y97.72501
G01 X74.06220 Y97.81922
G01 X74.07757 Y97.97528
G01 X74.07757 Y98.07134
G01 X74.06220 Y98.22742
G01 X74.04346 Y98.32163
G01 X73.99794 Y98.47170
G01 X73.96118 Y98.56044
G01 X73.88725 Y98.69875
G01 X73.83388 Y98.77863
G01 X73.75964 Y98.86910
G01 X73.73439 Y98.89986
G01 X73.66647 Y98.96778
G01 X73.54523 Y99.06727
G01 X73.46538 Y99.12064
G01 X73.32707 Y99.19455
G01 X73.23833 Y99.23131
G01 X73.09982 Y99.27332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.07993 Y101.14832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.07993 Y101.14832
G01 X78.23700 Y101.14832
G01 X78.39534 Y100.98998
G01 X78.35640 Y100.86163
G01 X78.33768 Y100.76742
G01 X78.32229 Y100.61134
G01 X78.32229 Y100.51528
G01 X78.33768 Y100.35922
G01 X78.35640 Y100.26501
G01 X78.40194 Y100.11492
G01 X78.43870 Y100.02618
G01 X78.51261 Y99.88787
G01 X78.56598 Y99.80801
G01 X78.66547 Y99.68678
G01 X78.73339 Y99.61886
G01 X78.85462 Y99.51937
G01 X78.93450 Y99.46600
G01 X79.07281 Y99.39206
G01 X79.16156 Y99.35531
G01 X79.31162 Y99.30979
G01 X79.39440 Y99.29331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.80047 Y99.24850 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.80047 Y99.24850
G01 X80.79899 Y99.26273
G01 X80.79899 Y99.32392
G01 X80.80049 Y99.33817
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X80.62541 Y99.29331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X80.62541 Y99.29331
G01 X80.70824 Y99.27685
G01 X80.80011 Y99.24899
G01 X80.80047 Y99.24850
G01 X80.80049 Y99.24850
G01 X80.84621 Y99.19158
G01 X80.90781 Y99.12107
G01 X80.98609 Y99.04266
G01 X81.02541 Y99.00840
G01 X81.03336 Y99.00136
G01 X81.07816 Y98.96118
G01 X81.11786 Y98.92813
G01 X81.15693 Y98.89796
G01 X81.19833 Y98.86042
G01 X81.24702 Y98.81173
G01 X81.29020 Y98.76407
G01 X81.31784 Y98.73525
G01 X81.33361 Y98.71970
G01 X81.35614 Y98.69842
G01 X81.41200 Y98.64782
G01 X81.45855 Y98.60865
G01 X81.51123 Y98.56740
G01 X81.54583 Y98.54155
G01 X81.60712 Y98.49778
G01 X81.60852 Y98.49682
G01 X81.70056 Y98.50291
G01 X81.79917 Y98.53080
G01 X81.85596 Y98.55351
G01 X81.91436 Y98.58427
G01 X81.91438 Y98.58429
G01 X81.98202 Y98.74563
G01 X82.00008 Y98.80319
G01 X82.00643 Y98.82260
G01 X82.02022 Y98.86283
G01 X82.04882 Y98.97362
G01 X82.04923 Y98.97596
G01 X82.06442 Y99.04327
G01 X82.08758 Y99.12656
G01 X82.09660 Y99.15892
G01 X82.10938 Y99.19351
G01 X82.13640 Y99.25689
G01 X82.17326 Y99.33281
G01 X82.21027 Y99.39524
G01 X82.24819 Y99.45264
G01 X82.27704 Y99.49196
G01 X82.34801 Y99.57360
G01 X82.39574 Y99.62336
G01 X82.40521 Y99.63230
G01 X82.51758 Y99.72211
G01 X82.55477 Y99.74985
G01 X82.57453 Y99.76090
G01 X82.71265 Y99.83519
G01 X82.72220 Y99.84025
G01 X82.77686 Y99.86047
G01 X82.90239 Y99.90103
G01 X82.92670 Y99.90672
G01 X82.99447 Y99.91911
G01 X83.08992 Y99.93176
G01 X83.15052 Y99.93474
G01 X83.21933 Y99.93474
G01 X83.27994 Y99.93176
G01 X83.37536 Y99.91911
G01 X83.44311 Y99.90672
G01 X83.46744 Y99.90103
G01 X83.53607 Y99.87886
G01 X83.59297 Y99.86047
G01 X83.64765 Y99.84025
G01 X83.65720 Y99.83519
G01 X83.79533 Y99.76090
G01 X83.81509 Y99.74987
G01 X83.85227 Y99.72211
G01 X83.86759 Y99.70984
G01 X83.96462 Y99.63230
G01 X83.97412 Y99.62333
G01 X84.02185 Y99.57360
G01 X84.09281 Y99.49196
G01 X84.12167 Y99.45264
G01 X84.15962 Y99.39519
G01 X84.19657 Y99.33281
G01 X84.23345 Y99.25683
G01 X84.26045 Y99.19356
G01 X84.27323 Y99.15894
G01 X84.30541 Y99.04332
G01 X84.32063 Y98.97596
G01 X84.32080 Y98.97487
G01 X84.33487 Y98.81978
G01 X84.33714 Y98.78533
G01 X84.33487 Y98.75087
G01 X84.32080 Y98.59577
G01 X84.32063 Y98.59468
G01 X84.30541 Y98.52735
G01 X84.27323 Y98.41170
G01 X84.26045 Y98.37708
G01 X84.23345 Y98.31381
G01 X84.19657 Y98.23784
G01 X84.15962 Y98.17546
G01 X84.12167 Y98.11800
G01 X84.09281 Y98.07868
G01 X84.02185 Y97.99705
G01 X83.97412 Y97.94731
G01 X83.96462 Y97.93835
G01 X83.88049 Y97.87111
G01 X83.85286 Y97.84782
G01 X83.80490 Y97.80528
G01 X83.79998 Y97.80096
G01 X83.76241 Y97.76824
G01 X83.68255 Y97.68795
G01 X83.62124 Y97.61726
G01 X83.57856 Y97.56494
G01 X83.57432 Y97.55940
G01 X83.57254 Y97.50393
G01 X83.57478 Y97.47109
G01 X83.62098 Y97.41279
G01 X83.68268 Y97.34282
G01 X83.74885 Y97.27576
G01 X83.79566 Y97.23357
G01 X83.80003 Y97.22969
G01 X83.85286 Y97.18282
G01 X83.88049 Y97.15953
G01 X83.96462 Y97.09230
G01 X83.97412 Y97.08333
G01 X84.02185 Y97.03360
G01 X84.09281 Y96.95196
G01 X84.12167 Y96.91264
G01 X84.15962 Y96.85519
G01 X84.19657 Y96.79281
G01 X84.23345 Y96.71683
G01 X84.26045 Y96.65356
G01 X84.27323 Y96.61894
G01 X84.30541 Y96.50332
G01 X84.32063 Y96.43596
G01 X84.32080 Y96.43487
G01 X84.33487 Y96.27978
G01 X84.33714 Y96.24533
G01 X84.33487 Y96.21087
G01 X84.32080 Y96.05577
G01 X84.32063 Y96.05468
G01 X84.30541 Y95.98735
G01 X84.27323 Y95.87170
G01 X84.26045 Y95.83708
G01 X84.23345 Y95.77381
G01 X84.19657 Y95.69784
G01 X84.15962 Y95.63546
G01 X84.12167 Y95.57800
G01 X84.09284 Y95.53871
G01 X84.02185 Y95.45705
G01 X84.00363 Y95.43693
G01 X83.98936 Y95.42171
G01 X83.98143 Y95.41343
G01 X83.97473 Y95.40653
G01 X83.90747 Y95.32641
G01 X83.90366 Y95.30459
G01 X83.89396 Y95.24341
G01 X83.88517 Y95.13236
G01 X83.88517 Y93.67348
G01 X83.88570 Y93.64595
G01 X83.88631 Y93.63040
G01 X83.90460 Y93.49543
G01 X83.90815 Y93.49053
G01 X83.94455 Y93.44041
G01 X84.01677 Y93.35581
G01 X84.74039 Y92.63216
G01 X84.76055 Y92.61278
G01 X84.77198 Y92.60224
G01 X84.88001 Y92.52002
G01 X84.88580 Y92.51908
G01 X84.94696 Y92.50938
G01 X85.05806 Y92.50056
G01 X85.11707 Y92.50056
G01 X85.15204 Y92.50145
G01 X85.17168 Y92.50242
G01 X85.31359 Y92.52385
G01 X85.31907 Y92.52843
G01 X85.36678 Y92.56843
G01 X85.39273 Y92.59129
G01 X85.44371 Y92.63838
G01 X85.44963 Y92.64389
G01 X85.45329 Y92.64735
G01 X85.56558 Y92.73711
G01 X85.60277 Y92.76485
G01 X85.62253 Y92.77590
G01 X85.76065 Y92.85019
G01 X85.77020 Y92.85525
G01 X85.82486 Y92.87547
G01 X85.95039 Y92.91603
G01 X85.97470 Y92.92172
G01 X86.04247 Y92.93411
G01 X86.13792 Y92.94676
G01 X86.19852 Y92.94974
G01 X86.26733 Y92.94974
G01 X86.32794 Y92.94676
G01 X86.42336 Y92.93411
G01 X86.49111 Y92.92172
G01 X86.51544 Y92.91603
G01 X86.64097 Y92.87547
G01 X86.69563 Y92.85525
G01 X86.70520 Y92.85019
G01 X86.84333 Y92.77590
G01 X86.86306 Y92.76487
G01 X86.90027 Y92.73711
G01 X87.01262 Y92.64730
G01 X87.02212 Y92.63833
G01 X87.06985 Y92.58860
G01 X87.14081 Y92.50696
G01 X87.16967 Y92.46764
G01 X87.20665 Y92.41181
G01 X87.20764 Y92.41019
G01 X87.22070 Y92.38913
G01 X87.22900 Y92.37625
G01 X87.30106 Y92.28233
G01 X87.31943 Y92.26198
G01 X87.35313 Y92.22213
G01 X87.36118 Y92.21199
G01 X87.47236 Y92.09444
G01 X87.49032 Y92.07824
G01 X87.49032 Y92.07821
G01 X87.49057 Y92.07801
G01 X87.50520 Y92.00442
G01 X87.52057 Y91.84834
G01 X87.52057 Y91.75228
G01 X87.50520 Y91.59622
G01 X87.49011 Y91.52035
G01 X87.48884 Y91.51926
G01 X87.47353 Y91.50590
G01 X87.35118 Y91.37913
G01 X87.31142 Y91.32924
G01 X87.30210 Y91.31776
G01 X87.27167 Y91.28106
G01 X87.20762 Y91.19046
G01 X87.20665 Y91.18880
G01 X87.16967 Y91.13300
G01 X87.14081 Y91.09368
G01 X87.06985 Y91.01205
G01 X87.02212 Y90.96231
G01 X87.01262 Y90.95335
G01 X86.90027 Y90.86353
G01 X86.86309 Y90.83579
G01 X86.84328 Y90.82472
G01 X86.70518 Y90.75045
G01 X86.69565 Y90.74542
G01 X86.64104 Y90.72523
G01 X86.51546 Y90.68464
G01 X86.49116 Y90.67895
G01 X86.42336 Y90.66655
G01 X86.32791 Y90.65388
G01 X86.26733 Y90.65091
G01 X86.19852 Y90.65091
G01 X86.13794 Y90.65388
G01 X86.04247 Y90.66655
G01 X85.97465 Y90.67895
G01 X85.95039 Y90.68464
G01 X85.82481 Y90.72523
G01 X85.77018 Y90.74542
G01 X85.76068 Y90.75045
G01 X85.62258 Y90.82472
G01 X85.60274 Y90.83579
G01 X85.56558 Y90.86353
G01 X85.45329 Y90.95330
G01 X85.44963 Y90.95675
G01 X85.44371 Y90.96226
G01 X85.42367 Y90.98080
G01 X85.40942 Y90.99432
G01 X85.39345 Y91.00994
G01 X85.31379 Y91.07727
G01 X85.28928 Y91.08159
G01 X85.22809 Y91.09129
G01 X85.11707 Y91.10008
G01 X84.58194 Y91.10008
G01 X84.54750 Y91.10092
G01 X84.51326 Y91.10262
G01 X84.47920 Y91.10765
G01 X84.41174 Y91.12109
G01 X84.37839 Y91.12942
G01 X84.34608 Y91.14100
G01 X84.28247 Y91.16732
G01 X84.25141 Y91.18202
G01 X84.22197 Y91.19965
G01 X84.16469 Y91.23793
G01 X84.13716 Y91.25837
G01 X84.11166 Y91.28146
G01 X84.08677 Y91.30519
G01 X82.68977 Y92.70219
G01 X82.66607 Y92.72708
G01 X82.64298 Y92.75256
G01 X82.63546 Y92.76266
G01 X82.62225 Y92.77991
G01 X82.59132 Y92.81905
G01 X82.57925 Y92.83475
G01 X82.56698 Y92.85118
G01 X82.53628 Y92.88954
G01 X82.48520 Y92.94925
G01 X82.43308 Y93.00513
G01 X82.42609 Y93.01202
G01 X82.37674 Y93.06426
G01 X82.36135 Y93.08169
G01 X82.35492 Y93.08847
G01 X82.28083 Y93.10021
G01 X82.17847 Y93.09485
G01 X82.07943 Y93.06830
G01 X82.02231 Y93.04636
G01 X81.93110 Y92.99985
G01 X81.85154 Y92.93541
G01 X81.78710 Y92.85583
G01 X81.75378 Y92.80452
G01 X81.71707 Y92.73696
G01 X81.69140 Y92.66444
G01 X81.65307 Y92.52134
G01 X81.58736 Y92.36272
G01 X81.50148 Y92.21397
G01 X81.39693 Y92.07773
G01 X81.27552 Y91.95632
G01 X81.13928 Y91.85177
G01 X80.99053 Y91.76589
G01 X80.84992 Y91.70765
G01 X80.84992 Y91.73275
G01 X80.85833 Y91.73531
G01 X80.94707 Y91.77206
G01 X81.08538 Y91.84600
G01 X81.16523 Y91.89937
G01 X81.28647 Y91.99886
G01 X81.35439 Y92.06678
G01 X81.45388 Y92.18801
G01 X81.50725 Y92.26787
G01 X81.58118 Y92.40618
G01 X81.61794 Y92.49492
G01 X81.66346 Y92.64501
G01 X81.68220 Y92.73922
G01 X81.69757 Y92.89528
G01 X81.69757 Y92.99134
G01 X81.68220 Y93.14742
G01 X81.66346 Y93.24163
G01 X81.61794 Y93.39170
G01 X81.58118 Y93.48044
G01 X81.50725 Y93.61875
G01 X81.45388 Y93.69863
G01 X81.35439 Y93.81986
G01 X81.28647 Y93.88778
G01 X81.16523 Y93.98727
G01 X81.08538 Y94.04064
G01 X80.94707 Y94.11455
G01 X80.85833 Y94.15131
G01 X80.70824 Y94.19685
G01 X80.62541 Y94.21331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.35492 Y93.08847 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.35492 Y93.08847
G01 X82.35309 Y93.09040
G01 X82.34730 Y93.14930
G01 X82.34494 Y93.19731
G01 X82.34494 Y95.27086
G01 X82.30839 Y95.30086
G01 X82.24047 Y95.36878
G01 X82.14098 Y95.49001
G01 X82.08761 Y95.56987
G01 X82.01370 Y95.70818
G01 X81.97694 Y95.79692
G01 X81.93140 Y95.94701
G01 X81.91268 Y96.04122
G01 X81.89729 Y96.19728
G01 X81.89729 Y96.29334
G01 X81.91268 Y96.44942
G01 X81.93140 Y96.54363
G01 X81.97694 Y96.69370
G01 X82.01370 Y96.78244
G01 X82.08761 Y96.92075
G01 X82.14098 Y97.00063
G01 X82.24047 Y97.12186
G01 X82.30839 Y97.18978
G01 X82.42962 Y97.28927
G01 X82.50950 Y97.34264
G01 X82.64781 Y97.41655
G01 X82.73655 Y97.45331
G01 X82.88662 Y97.49885
G01 X82.96940 Y97.51533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.98202 Y98.74563 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.98202 Y98.74563
G01 X81.91311 Y98.58130
G01 X81.91278 Y98.58064
G01 X81.93140 Y98.48701
G01 X81.97694 Y98.33692
G01 X82.01370 Y98.24818
G01 X82.08761 Y98.10987
G01 X82.14098 Y98.03001
G01 X82.24047 Y97.90878
G01 X82.30839 Y97.84086
G01 X82.42962 Y97.74137
G01 X82.50950 Y97.68800
G01 X82.64781 Y97.61406
G01 X82.73655 Y97.57731
G01 X82.88662 Y97.53179
G01 X82.96940 Y97.51533
G01 X83.40041 Y97.51533
G01 X83.48324 Y97.53179
G01 X83.57432 Y97.55940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.57478 Y97.47109 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.57478 Y97.47109
G01 X83.48324 Y97.49885
G01 X83.40041 Y97.51533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.52057 Y101.99648 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.52057 Y101.99648
G01 X87.52057 Y102.00834
G01 X87.50520 Y102.16442
G01 X87.48646 Y102.25863
G01 X87.44094 Y102.40870
G01 X87.40419 Y102.49744
G01 X87.33025 Y102.63575
G01 X87.27688 Y102.71563
G01 X87.17739 Y102.83686
G01 X87.10947 Y102.90478
G01 X86.98824 Y103.00427
G01 X86.90838 Y103.05764
G01 X86.77007 Y103.13155
G01 X86.68133 Y103.16831
G01 X86.53124 Y103.21385
G01 X86.43703 Y103.23257
G01 X86.28097 Y103.24796
G01 X86.18491 Y103.24796
G01 X86.02883 Y103.23257
G01 X85.93462 Y103.21385
G01 X85.91935 Y103.20920
G01 X85.91912 Y103.20895
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.54583 Y98.54155 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.54583 Y98.54155
G01 X81.60712 Y98.49783
G01 X81.60712 Y98.49778
G01 X81.61794 Y98.47170
G01 X81.66346 Y98.32163
G01 X81.68220 Y98.22742
G01 X81.69757 Y98.07134
G01 X81.69757 Y97.97528
G01 X81.68771 Y97.87505
G01 X81.68220 Y97.81922
G01 X81.66346 Y97.72501
G01 X81.61794 Y97.57492
G01 X81.58118 Y97.48618
G01 X81.50725 Y97.34787
G01 X81.45388 Y97.26801
G01 X81.35439 Y97.14678
G01 X81.28647 Y97.07886
G01 X81.16523 Y96.97937
G01 X81.08538 Y96.92600
G01 X80.94707 Y96.85206
G01 X80.85833 Y96.81531
G01 X80.70824 Y96.76979
G01 X80.62541 Y96.75331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.39440 Y96.75333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.39440 Y96.75333
G01 X79.31162 Y96.73685
G01 X79.16156 Y96.69131
G01 X79.07281 Y96.65455
G01 X78.93450 Y96.58064
G01 X78.85462 Y96.52727
G01 X78.73339 Y96.42778
G01 X78.66547 Y96.35986
G01 X78.56598 Y96.23863
G01 X78.51261 Y96.15875
G01 X78.43870 Y96.02044
G01 X78.40194 Y95.93170
G01 X78.35640 Y95.78163
G01 X78.33768 Y95.68742
G01 X78.32229 Y95.53134
G01 X78.32229 Y95.43528
G01 X78.33768 Y95.27922
G01 X78.35640 Y95.18501
G01 X78.40194 Y95.03492
G01 X78.43870 Y94.94618
G01 X78.51261 Y94.80787
G01 X78.56598 Y94.72801
G01 X78.66547 Y94.60678
G01 X78.73339 Y94.53886
G01 X78.85462 Y94.43937
G01 X78.93450 Y94.38600
G01 X79.07281 Y94.31206
G01 X79.16156 Y94.27531
G01 X79.31162 Y94.22979
G01 X79.39440 Y94.21331
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X78.35714 Y93.24402 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X78.35714 Y93.24402
G01 X75.52389 Y96.07729
G01 X75.48826 Y96.10960
G01 X75.43522 Y96.15311
G01 X75.35537 Y96.20647
G01 X75.29486 Y96.23883
G01 X75.20611 Y96.27559
G01 X75.14046 Y96.29550
G01 X75.04625 Y96.31424
G01 X74.97795 Y96.32095
G01 X74.92994 Y96.32331
G01 X73.76439 Y96.32331
G01 X73.73439 Y96.35986
G01 X73.66647 Y96.42778
G01 X73.54523 Y96.52727
G01 X73.46538 Y96.58064
G01 X73.32707 Y96.65455
G01 X73.23833 Y96.69131
G01 X73.08824 Y96.73685
G01 X73.00541 Y96.75331
G01 X71.77440 Y96.75333
G01 X71.69162 Y96.76979
G01 X71.59977 Y96.79766
G01 X71.59937 Y96.79814
G01 X71.55357 Y96.85516
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.59937 Y96.70850 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.59937 Y96.70850
G01 X71.59975 Y96.70896
G01 X71.69162 Y96.73685
G01 X71.77440 Y96.75333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.67988 Y99.27332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.67988 Y99.27332
G01 X71.54156 Y99.23131
G01 X71.45281 Y99.19455
G01 X71.36127 Y99.14563
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.18994 Y99.36118 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.18994 Y99.36118
G01 X71.33780 Y99.26466
G01 X71.34112 Y99.25676
G01 X71.36040 Y99.15607
G01 X71.36127 Y99.14563
G01 X71.33241 Y99.09250
G01 X71.28504 Y99.00586
G01 X71.19716 Y98.87601
G01 X71.19289 Y98.87093
G01 X71.16315 Y98.83278
G01 X71.14968 Y98.81432
G01 X71.11908 Y98.77520
G01 X71.05352 Y98.69036
G01 X71.01412 Y98.63385
G01 X71.00843 Y98.62476
G01 X70.94082 Y98.49519
G01 X70.92558 Y98.46423
G01 X70.91443 Y98.43149
G01 X70.87064 Y98.29204
G01 X70.86825 Y98.28163
G01 X70.85614 Y98.21378
G01 X70.84326 Y98.11358
G01 X70.84052 Y98.05773
G01 X70.84052 Y97.98892
G01 X70.84326 Y97.93309
G01 X70.85614 Y97.83289
G01 X70.86825 Y97.76504
G01 X70.87064 Y97.75460
G01 X70.91443 Y97.61516
G01 X70.92558 Y97.58244
G01 X70.94082 Y97.55145
G01 X71.00836 Y97.42204
G01 X71.01415 Y97.41282
G01 X71.05352 Y97.35628
G01 X71.11532 Y97.27630
G01 X71.15283 Y97.23489
G01 X71.20150 Y97.18623
G01 X71.24288 Y97.14874
G01 X71.28194 Y97.11856
G01 X71.32169 Y97.08546
G01 X71.36645 Y97.04533
G01 X71.37450 Y97.03822
G01 X71.41369 Y97.00406
G01 X71.49210 Y96.92555
G01 X71.55357 Y96.85516
G01 X71.59937 Y96.79817
G01 X71.59937 Y96.79814
G01 X71.60086 Y96.78392
G01 X71.60086 Y96.72273
G01 X71.59937 Y96.70850
G01 X71.55362 Y96.65158
G01 X71.49205 Y96.58107
G01 X71.41377 Y96.50266
G01 X71.37445 Y96.46840
G01 X71.36650 Y96.46136
G01 X71.32169 Y96.42118
G01 X71.28194 Y96.38808
G01 X71.24288 Y96.35791
G01 X71.20150 Y96.32042
G01 X71.15283 Y96.27175
G01 X71.11529 Y96.23032
G01 X71.05352 Y96.15036
G01 X71.01412 Y96.09385
G01 X71.00843 Y96.08476
G01 X70.94082 Y95.95519
G01 X70.92558 Y95.92423
G01 X70.91443 Y95.89149
G01 X70.87064 Y95.75204
G01 X70.86825 Y95.74163
G01 X70.85614 Y95.67378
G01 X70.84326 Y95.57358
G01 X70.84052 Y95.51773
G01 X70.84052 Y95.44892
G01 X70.84326 Y95.39309
G01 X70.85614 Y95.29289
G01 X70.86825 Y95.22504
G01 X70.87064 Y95.21460
G01 X70.91443 Y95.07516
G01 X70.92558 Y95.04244
G01 X70.94082 Y95.01145
G01 X71.00264 Y94.89304
G01 X71.00843 Y94.88191
G01 X71.01415 Y94.87282
G01 X71.05352 Y94.81628
G01 X71.11532 Y94.73630
G01 X71.15283 Y94.69489
G01 X71.20150 Y94.64623
G01 X71.24288 Y94.60874
G01 X71.28194 Y94.57856
G01 X71.32169 Y94.54547
G01 X71.36645 Y94.50533
G01 X71.37450 Y94.49822
G01 X71.41369 Y94.46406
G01 X71.49210 Y94.38555
G01 X71.55357 Y94.31516
G01 X71.59937 Y94.25817
G01 X71.59937 Y94.25814
G01 X71.60086 Y94.24392
G01 X71.60086 Y94.18273
G01 X71.59937 Y94.16850
G01 X71.55362 Y94.11158
G01 X71.49205 Y94.04107
G01 X71.41377 Y93.96266
G01 X71.37445 Y93.92840
G01 X71.36650 Y93.92136
G01 X71.32169 Y93.88118
G01 X71.28194 Y93.84808
G01 X71.24288 Y93.81791
G01 X71.20150 Y93.78042
G01 X71.15283 Y93.73175
G01 X71.11529 Y93.69032
G01 X71.05352 Y93.61036
G01 X71.01412 Y93.55385
G01 X71.00843 Y93.54476
G01 X70.94082 Y93.41519
G01 X70.92558 Y93.38423
G01 X70.91443 Y93.35149
G01 X70.87064 Y93.21204
G01 X70.86825 Y93.20163
G01 X70.85614 Y93.13378
G01 X70.84326 Y93.03358
G01 X70.84052 Y92.97773
G01 X70.84052 Y92.90892
G01 X70.84326 Y92.85309
G01 X70.85614 Y92.75289
G01 X70.86825 Y92.68504
G01 X70.87064 Y92.67460
G01 X70.91443 Y92.53516
G01 X70.92558 Y92.50244
G01 X70.94082 Y92.47145
G01 X71.00348 Y92.35141
G01 X71.00843 Y92.34191
G01 X71.01415 Y92.33282
G01 X71.05352 Y92.27628
G01 X71.11532 Y92.19630
G01 X71.15283 Y92.15489
G01 X71.20150 Y92.10623
G01 X71.24290 Y92.06871
G01 X71.32289 Y92.00691
G01 X71.37945 Y91.96749
G01 X71.38847 Y91.96185
G01 X71.51809 Y91.89421
G01 X71.54907 Y91.87900
G01 X71.58169 Y91.86785
G01 X71.72121 Y91.82403
G01 X71.73155 Y91.82165
G01 X71.79947 Y91.80953
G01 X71.89967 Y91.79665
G01 X71.95552 Y91.79391
G01 X71.98994 Y91.79307
G01 X72.78994 Y91.79307
G01 X72.82433 Y91.79391
G01 X72.88016 Y91.79665
G01 X72.98036 Y91.80953
G01 X73.04826 Y91.82165
G01 X73.05865 Y91.82403
G01 X73.19814 Y91.86785
G01 X73.23078 Y91.87900
G01 X73.26177 Y91.89421
G01 X73.39139 Y91.96185
G01 X73.40040 Y91.96752
G01 X73.45697 Y92.00691
G01 X73.53693 Y92.06871
G01 X73.57836 Y92.10623
G01 X73.62702 Y92.15489
G01 X73.66454 Y92.19632
G01 X73.72634 Y92.27628
G01 X73.76573 Y92.33285
G01 X73.77140 Y92.34186
G01 X73.83904 Y92.47148
G01 X73.85425 Y92.50247
G01 X73.86540 Y92.53511
G01 X73.90922 Y92.67458
G01 X73.91160 Y92.68499
G01 X73.92372 Y92.75289
G01 X73.93660 Y92.85309
G01 X73.93934 Y92.90892
G01 X73.93934 Y92.97773
G01 X73.93660 Y93.03358
G01 X73.92372 Y93.13378
G01 X73.91160 Y93.20170
G01 X73.90922 Y93.21204
G01 X73.86540 Y93.35156
G01 X73.85425 Y93.38418
G01 X73.83904 Y93.41517
G01 X73.77140 Y93.54478
G01 X73.76573 Y93.55380
G01 X73.72634 Y93.61036
G01 X73.66454 Y93.69032
G01 X73.62702 Y93.73175
G01 X73.57836 Y93.78042
G01 X73.53695 Y93.81793
G01 X73.49786 Y93.84813
G01 X73.45816 Y93.88118
G01 X73.41336 Y93.92136
G01 X73.40541 Y93.92840
G01 X73.36609 Y93.96266
G01 X73.28781 Y94.04107
G01 X73.22621 Y94.11158
G01 X73.18049 Y94.16850
G01 X73.18046 Y94.16850
G01 X73.18011 Y94.16899
G01 X73.08824 Y94.19685
G01 X73.00541 Y94.21331
G01 X71.77440 Y94.21333
G01 X71.69162 Y94.22979
G01 X71.59977 Y94.25766
G01 X71.59937 Y94.25814
G01 X71.55357 Y94.31516
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.77440 Y94.21333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.77440 Y94.21333
G01 X71.69162 Y94.19685
G01 X71.59975 Y94.16896
G01 X71.59937 Y94.16850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.09376 Y92.58738 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.09376 Y92.58738
G01 X68.03293 Y92.67056
G01 X68.03204 Y92.70465
G01 X68.03206 Y92.70536
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.97933 Y92.68933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.97933 Y92.68933
G01 X68.03145 Y92.70511
G01 X68.03206 Y92.70536
G01 X68.07522 Y92.76264
G01 X68.09442 Y92.78999
G01 X68.21116 Y92.92510
G01 X68.22955 Y92.94222
G01 X68.26277 Y92.97521
G01 X68.26333 Y92.97580
G01 X68.32365 Y93.03262
G01 X68.38563 Y93.08448
G01 X68.38802 Y93.08651
G01 X68.41390 Y93.10927
G01 X68.43674 Y93.13523
G01 X68.53562 Y93.25334
G01 X68.54296 Y93.26363
G01 X68.58014 Y93.32172
G01 X68.63326 Y93.41445
G01 X68.65888 Y93.46858
G01 X68.68520 Y93.53216
G01 X68.70534 Y93.58844
G01 X68.73333 Y93.69167
G01 X68.74814 Y93.75898
G01 X68.75022 Y93.77140
G01 X68.76381 Y93.92487
G01 X68.76602 Y93.95931
G01 X68.76381 Y93.99378
G01 X68.75022 Y94.14724
G01 X68.74814 Y94.15969
G01 X68.73333 Y94.22700
G01 X68.70537 Y94.33017
G01 X68.68520 Y94.38651
G01 X68.66546 Y94.43571
G01 X68.65886 Y94.45006
G01 X68.63326 Y94.50422
G01 X68.58014 Y94.59693
G01 X68.54296 Y94.65502
G01 X68.53574 Y94.66518
G01 X68.43674 Y94.78341
G01 X68.41390 Y94.80937
G01 X68.38802 Y94.83213
G01 X68.26991 Y94.93104
G01 X68.25962 Y94.93835
G01 X68.20151 Y94.97554
G01 X68.10877 Y95.02867
G01 X68.05464 Y95.05428
G01 X67.99114 Y95.08059
G01 X67.93481 Y95.10073
G01 X67.83161 Y95.12875
G01 X67.76427 Y95.14353
G01 X67.75180 Y95.14564
G01 X67.59836 Y95.15923
G01 X67.56392 Y95.16144
G01 X67.52945 Y95.15923
G01 X67.37598 Y95.14564
G01 X67.36353 Y95.14353
G01 X67.29620 Y95.12875
G01 X67.19305 Y95.10076
G01 X67.13669 Y95.08057
G01 X67.07319 Y95.05428
G01 X67.01906 Y95.02867
G01 X66.92632 Y94.97554
G01 X66.86821 Y94.93835
G01 X66.85790 Y94.93104
G01 X66.73984 Y94.83213
G01 X66.71390 Y94.80935
G01 X66.69112 Y94.78341
G01 X66.59221 Y94.66530
G01 X66.58490 Y94.65502
G01 X66.54769 Y94.59693
G01 X66.49458 Y94.50419
G01 X66.46897 Y94.45006
G01 X66.44268 Y94.38656
G01 X66.42249 Y94.33020
G01 X66.39450 Y94.22705
G01 X66.37972 Y94.15969
G01 X66.37758 Y94.14722
G01 X66.36399 Y93.99378
G01 X66.36181 Y93.95931
G01 X66.36399 Y93.92487
G01 X66.37758 Y93.77143
G01 X66.37972 Y93.75898
G01 X66.39450 Y93.69162
G01 X66.42249 Y93.58844
G01 X66.44266 Y93.53211
G01 X66.46897 Y93.46858
G01 X66.49458 Y93.41448
G01 X66.54769 Y93.32172
G01 X66.58490 Y93.26363
G01 X66.59221 Y93.25334
G01 X66.69112 Y93.13523
G01 X66.71388 Y93.10932
G01 X66.73984 Y93.08651
G01 X66.74217 Y93.08451
G01 X66.80420 Y93.03262
G01 X66.86450 Y92.97580
G01 X66.88492 Y92.95421
G01 X66.91578 Y92.92340
G01 X66.92996 Y92.91004
G01 X67.03410 Y92.79126
G01 X67.09490 Y92.70803
G01 X67.09658 Y92.70574
G01 X67.09724 Y92.70485
G01 X67.14847 Y92.68933
G01 X67.97933 Y92.68933
G01 X68.03059 Y92.67376
G01 X68.03125 Y92.67282
G01 X68.09376 Y92.58738
G01 X68.19798 Y92.46851
G01 X68.21207 Y92.45525
G01 X68.24301 Y92.42434
G01 X68.26333 Y92.40285
G01 X68.32363 Y92.34605
G01 X68.38802 Y92.29213
G01 X68.41393 Y92.26935
G01 X68.43674 Y92.24341
G01 X68.52812 Y92.13429
G01 X68.53559 Y92.12535
G01 X68.54296 Y92.11502
G01 X68.56536 Y92.08156
G01 X68.58014 Y92.05693
G01 X68.63326 Y91.96419
G01 X68.65888 Y91.91006
G01 X68.68520 Y91.84651
G01 X68.70534 Y91.79020
G01 X68.73333 Y91.68700
G01 X68.74814 Y91.61969
G01 X68.75022 Y91.60724
G01 X68.76381 Y91.45378
G01 X68.76602 Y91.41933
G01 X68.76381 Y91.38487
G01 X68.75022 Y91.23140
G01 X68.74814 Y91.21898
G01 X68.73333 Y91.15167
G01 X68.70534 Y91.04844
G01 X68.68520 Y90.99216
G01 X68.65888 Y90.92858
G01 X68.63326 Y90.87445
G01 X68.58014 Y90.78172
G01 X68.54296 Y90.72363
G01 X68.53567 Y90.71337
G01 X68.51476 Y90.68842
G01 X68.46427 Y90.62023
G01 X68.44408 Y90.58921
G01 X68.43854 Y90.58080
G01 X68.40311 Y90.52810
G01 X68.32406 Y90.38045
G01 X68.31885 Y90.36813
G01 X68.29544 Y90.31662
G01 X68.28327 Y90.29168
G01 X68.28327 Y90.29165
G01 X68.29648 Y90.22272
G01 X68.30140 Y90.21931
G01 X68.41390 Y90.14232
G01 X68.47768 Y90.10641
G01 X68.53226 Y90.07270
G01 X68.62546 Y90.00966
G01 X68.63074 Y90.00603
G01 X68.69061 Y89.94616
G01 X68.73445 Y89.87359
G01 X68.76097 Y89.78746
G01 X68.76297 Y89.77004
G01 X68.76414 Y89.72932
G01 X68.76414 Y88.02932
G01 X68.76297 Y87.98863
G01 X68.76097 Y87.97118
G01 X68.73445 Y87.88508
G01 X68.69061 Y87.81251
G01 X68.63072 Y87.75262
G01 X68.55820 Y87.70878
G01 X68.47207 Y87.68228
G01 X68.45459 Y87.68028
G01 X68.41390 Y87.67908
G01 X66.71390 Y87.67908
G01 X66.67319 Y87.68028
G01 X66.65574 Y87.68231
G01 X66.56963 Y87.70875
G01 X66.49712 Y87.75262
G01 X66.43720 Y87.81253
G01 X66.39336 Y87.88508
G01 X66.36689 Y87.97113
G01 X66.36483 Y87.98861
G01 X66.36366 Y88.02932
G01 X66.36366 Y89.72932
G01 X66.36483 Y89.77004
G01 X66.36689 Y89.78754
G01 X66.39336 Y89.87362
G01 X66.43720 Y89.94611
G01 X66.49712 Y90.00605
G01 X66.50247 Y90.00971
G01 X66.57253 Y90.05713
G01 X66.61312 Y90.08268
G01 X66.71390 Y90.14179
G01 X66.82671 Y90.21931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.97499 Y90.21934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.97499 Y90.21934
G01 X66.82671 Y90.21931
G01 X66.82737 Y90.21977
G01 X66.83044 Y90.22889
G01 X66.84474 Y90.28837
G01 X66.84489 Y90.28939
G01 X66.84393 Y90.29163
G01 X66.86072 Y90.28042
G01 X66.97499 Y90.21934
G01 X67.01207 Y90.21004
G01 X67.10445 Y90.19163
G01 X67.27105 Y90.16691
G01 X67.35602 Y90.15853
G01 X67.52267 Y90.15035
G01 X67.60516 Y90.15035
G01 X67.77181 Y90.15853
G01 X67.85673 Y90.16691
G01 X68.02335 Y90.19163
G01 X68.11578 Y90.21004
G01 X68.15274 Y90.21931
G01 X68.26717 Y90.28042
G01 X68.28294 Y90.29096
G01 X68.28327 Y90.29165
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.30140 Y90.21931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.30140 Y90.21931
G01 X68.15274 Y90.21931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X66.84393 Y90.29163 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X66.84393 Y90.29163
G01 X66.84390 Y90.29165
G01 X66.81042 Y90.36986
G01 X66.72389 Y90.52708
G01 X66.71152 Y90.54474
G01 X66.68309 Y90.58863
G01 X66.67801 Y90.59709
G01 X66.61307 Y90.68842
G01 X66.59221 Y90.71334
G01 X66.58490 Y90.72363
G01 X66.54769 Y90.78172
G01 X66.49458 Y90.87448
G01 X66.46897 Y90.92858
G01 X66.44266 Y90.99211
G01 X66.42249 Y91.04844
G01 X66.39450 Y91.15162
G01 X66.37972 Y91.21898
G01 X66.37758 Y91.23143
G01 X66.36399 Y91.38487
G01 X66.36181 Y91.41933
G01 X66.36399 Y91.45378
G01 X66.37758 Y91.60722
G01 X66.37972 Y91.61969
G01 X66.39450 Y91.68705
G01 X66.42249 Y91.79020
G01 X66.44268 Y91.84656
G01 X66.46897 Y91.91006
G01 X66.49458 Y91.96419
G01 X66.54769 Y92.05693
G01 X66.58490 Y92.11502
G01 X66.59221 Y92.12530
G01 X66.69112 Y92.24341
G01 X66.71390 Y92.26932
G01 X66.73984 Y92.29213
G01 X66.80423 Y92.34605
G01 X66.86450 Y92.40285
G01 X66.86526 Y92.40364
G01 X66.89851 Y92.43663
G01 X66.91670 Y92.45355
G01 X67.03341 Y92.58867
G01 X67.05264 Y92.61603
G01 X67.09572 Y92.67321
G01 X67.09643 Y92.67351
G01 X67.14847 Y92.68933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.09572 Y92.67321 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.09572 Y92.67321
G01 X67.09577 Y92.67399
G01 X67.09490 Y92.70808
G01 X67.03410 Y92.79126
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.84327 Y97.21854 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.84327 Y97.21854
G01 X63.71137 Y97.26459
G01 X63.66270 Y97.32389
G01 X63.62293 Y97.38338
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.39466 Y99.38221 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.39466 Y99.38221
G01 X60.40752 Y99.38465
G01 X60.49443 Y99.36136
G01 X60.58567 Y99.31487
G01 X60.66525 Y99.25048
G01 X60.70853 Y99.20723
G01 X60.71922 Y99.19435
G01 X60.76591 Y99.13827
G01 X60.80975 Y99.05998
G01 X60.83860 Y98.97505
G01 X60.84940 Y98.93009
G01 X60.86294 Y98.81566
G01 X60.86294 Y98.09136
G01 X60.88877 Y97.89512
G01 X60.93998 Y97.70390
G01 X61.01574 Y97.52105
G01 X61.11470 Y97.34962
G01 X61.23520 Y97.19260
G01 X61.37521 Y97.05262
G01 X61.53223 Y96.93213
G01 X61.53291 Y96.93172
G01 X61.53291 Y96.96243
G01 X61.50652 Y96.98008
G01 X61.35499 Y97.10444
G01 X61.28707 Y97.17236
G01 X61.16268 Y97.32389
G01 X61.10932 Y97.40375
G01 X61.01691 Y97.57665
G01 X60.98016 Y97.66540
G01 X60.92326 Y97.85298
G01 X60.90452 Y97.94719
G01 X60.88529 Y98.14228
G01 X60.88293 Y98.19031
G01 X60.88293 Y99.69031
G01 X60.88529 Y99.73834
G01 X60.89906 Y99.87850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.57759 Y101.14835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.57759 Y101.14835
G01 X64.53560 Y101.13999
G01 X64.34802 Y101.08309
G01 X64.25927 Y101.04634
G01 X64.08638 Y100.95394
G01 X64.00652 Y100.90054
G01 X63.85498 Y100.77619
G01 X63.78706 Y100.70827
G01 X63.66270 Y100.55673
G01 X63.62293 Y100.49722
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.66832 Y101.14835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.66832 Y101.14835
G01 X62.71025 Y101.13999
G01 X62.89786 Y101.08309
G01 X62.98661 Y101.04634
G01 X63.15950 Y100.95394
G01 X63.23936 Y100.90054
G01 X63.39090 Y100.77619
G01 X63.45882 Y100.70827
G01 X63.58318 Y100.55673
G01 X63.62293 Y100.49722
G01 X63.62293 Y97.38338
G01 X63.58318 Y97.32389
G01 X63.45882 Y97.17236
G01 X63.39090 Y97.10444
G01 X63.23936 Y96.98008
G01 X63.21292 Y96.96240
G01 X63.21292 Y96.93172
G01 X63.21363 Y96.93213
G01 X63.37068 Y97.05262
G01 X63.43807 Y97.12003
G01 X63.49659 Y97.16997
G01 X63.56217 Y97.21018
G01 X63.61668 Y97.23794
G01 X63.69816 Y97.26918
G01 X63.84327 Y97.21854
G01 X63.90083 Y97.19095
G01 X63.91904 Y97.18249
G01 X63.95861 Y97.16471
G01 X64.08775 Y97.09047
G01 X64.09361 Y97.08625
G01 X64.10250 Y97.07993
G01 X64.12102 Y97.06702
G01 X64.15170 Y97.04894
G01 X64.27601 Y96.97985
G01 X64.32475 Y96.95681
G01 X64.37604 Y96.93500
G01 X64.38831 Y96.93047
G01 X64.43908 Y96.91231
G01 X64.57578 Y96.87327
G01 X64.60923 Y96.86461
G01 X64.64340 Y96.85981
G01 X64.78467 Y96.84356
G01 X64.83855 Y96.84091
G01 X64.90730 Y96.84091
G01 X64.96118 Y96.84356
G01 X65.10245 Y96.85981
G01 X65.13662 Y96.86461
G01 X65.17007 Y96.87327
G01 X65.30677 Y96.91231
G01 X65.35754 Y96.93047
G01 X65.42110 Y96.95679
G01 X65.45599 Y96.97330
G01 X65.46984 Y96.97985
G01 X65.59415 Y97.04894
G01 X65.62389 Y97.06644
G01 X65.65142 Y97.08722
G01 X65.76280 Y97.17561
G01 X65.80276 Y97.21180
G01 X65.85389 Y97.25849
G01 X65.88856 Y97.28821
G01 X65.93725 Y97.32737
G01 X66.01317 Y97.38138
G01 X66.08917 Y97.42910
G01 X66.12292 Y97.44942
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.18393 Y100.93697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.18393 Y100.93697
G01 X68.19109 Y100.97542
G01 X68.20844 Y101.03407
G01 X68.24718 Y101.12757
G01 X68.28571 Y101.14832
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.76198 Y101.21037 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.76198 Y101.21037
G01 X70.91491 Y101.36331
G01 X71.18994 Y101.50082
G01 X73.58994 Y101.50082
G01 X73.86494 Y101.36331
G01 X74.07993 Y101.14832
G01 X74.07993 Y99.76331
G01 X74.07053 Y99.66773
G01 X74.04264 Y99.57581
G01 X73.99735 Y99.49107
G01 X73.93642 Y99.41683
G01 X73.86218 Y99.35589
G01 X73.77744 Y99.31061
G01 X73.68554 Y99.28272
G01 X73.58994 Y99.27332
G01 X73.09982 Y99.27332
G01 X73.08765 Y99.27512
G01 X72.99291 Y99.28450
G01 X72.83609 Y99.29219
G01 X72.78994 Y99.29331
G01 X71.98994 Y99.29331
G01 X71.94376 Y99.29219
G01 X71.78692 Y99.28450
G01 X71.69215 Y99.27512
G01 X71.67988 Y99.27332
G01 X71.32456 Y99.27332
G01 X71.18994 Y99.36118
G01 X71.16891 Y99.37149
G01 X71.11133 Y99.40261
G01 X71.01336 Y99.46077
G01 X70.97318 Y99.48658
G01 X70.91316 Y99.54657
G01 X70.90742 Y99.55506
G01 X70.86937 Y99.61904
G01 X70.84290 Y99.70514
G01 X70.84082 Y99.72267
G01 X70.83968 Y99.76331
G01 X70.83968 Y100.83882
G01 X70.83747 Y100.89404
G01 X70.83503 Y100.92503
G01 X70.80000 Y101.09859
G01 X70.78014 Y101.15978
G01 X70.76198 Y101.21037
G01 X70.56249 Y101.26961
G01 X70.50127 Y101.27928
G01 X70.39043 Y101.28807
G01 X68.75987 Y101.28807
G01 X68.70024 Y101.28553
G01 X68.66673 Y101.28269
G01 X68.48713 Y101.24456
G01 X68.42592 Y101.22379
G01 X68.28571 Y101.14832
G01 X67.66833 Y101.14832
G01 X67.61548 Y101.15355
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.07756 Y101.14835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.07756 Y101.14835
G01 X67.03557 Y101.13999
G01 X66.84802 Y101.08309
G01 X66.75927 Y101.04634
G01 X66.58637 Y100.95394
G01 X66.50651 Y100.90054
G01 X66.35498 Y100.77619
G01 X66.28703 Y100.70827
G01 X66.16270 Y100.55673
G01 X66.12292 Y100.49722
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.16831 Y101.14835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.16831 Y101.14835
G01 X65.21028 Y101.13999
G01 X65.39785 Y101.08309
G01 X65.48660 Y101.04634
G01 X65.65950 Y100.95394
G01 X65.73936 Y100.90054
G01 X65.89089 Y100.77619
G01 X65.95881 Y100.70827
G01 X66.08317 Y100.55673
G01 X66.12292 Y100.49722
G01 X66.12292 Y97.44942
G01 X66.15531 Y97.42839
G01 X66.17436 Y97.41551
G01 X66.23069 Y97.38031
G01 X66.23113 Y97.38008
G01 X66.37746 Y97.27228
G01 X66.39204 Y97.25854
G01 X66.40021 Y97.25095
G01 X66.44309 Y97.21180
G01 X66.48304 Y97.17561
G01 X66.59442 Y97.08722
G01 X66.62191 Y97.06644
G01 X66.65170 Y97.04894
G01 X66.68993 Y97.02771
G01 X66.77598 Y96.97988
G01 X66.82475 Y96.95681
G01 X66.88830 Y96.93047
G01 X66.93905 Y96.91231
G01 X67.07578 Y96.87327
G01 X67.10918 Y96.86461
G01 X67.14339 Y96.85981
G01 X67.28467 Y96.84356
G01 X67.33852 Y96.84091
G01 X67.40727 Y96.84091
G01 X67.46117 Y96.84356
G01 X67.60242 Y96.85981
G01 X67.63658 Y96.86459
G01 X67.67004 Y96.87327
G01 X67.80674 Y96.91231
G01 X67.85754 Y96.93047
G01 X67.92109 Y96.95679
G01 X67.96976 Y96.97983
G01 X68.09414 Y97.04894
G01 X68.12388 Y97.06644
G01 X68.15142 Y97.08722
G01 X68.26280 Y97.17561
G01 X68.30273 Y97.21180
G01 X68.35144 Y97.26050
G01 X68.38766 Y97.30045
G01 X68.47605 Y97.41183
G01 X68.49681 Y97.43934
G01 X68.51431 Y97.46911
G01 X68.58337 Y97.59336
G01 X68.60643 Y97.64216
G01 X68.62421 Y97.68310
G01 X68.63277 Y97.70571
G01 X68.65093 Y97.75648
G01 X68.68997 Y97.89318
G01 X68.69861 Y97.92664
G01 X68.70344 Y97.96080
G01 X68.71969 Y98.10207
G01 X68.72233 Y98.15595
G01 X68.72315 Y98.19034
G01 X68.72315 Y99.69031
G01 X68.72233 Y99.72470
G01 X68.71969 Y99.77858
G01 X68.70344 Y99.91985
G01 X68.69861 Y99.95401
G01 X68.68997 Y99.98747
G01 X68.65093 Y100.12414
G01 X68.63277 Y100.17494
G01 X68.62304 Y100.20055
G01 X68.60643 Y100.23849
G01 X68.58337 Y100.28726
G01 X68.51431 Y100.41154
G01 X68.49681 Y100.44129
G01 X68.47605 Y100.46882
G01 X68.40097 Y100.56341
G01 X68.35726 Y100.62495
G01 X68.33709 Y100.65670
G01 X68.31723 Y100.68650
G01 X68.30143 Y100.70898
G01 X68.21324 Y100.86877
G01 X68.18393 Y100.93697
G01 X68.18357 Y100.93783
G01 X68.15949 Y100.95394
G01 X67.98660 Y101.04634
G01 X67.89785 Y101.08309
G01 X67.71027 Y101.13999
G01 X67.66833 Y101.14832
G01 X67.66833 Y101.14835
G01 X67.61548 Y101.15355
G01 X67.41947 Y101.16318
G01 X67.32637 Y101.16318
G01 X67.13031 Y101.15355
G01 X67.07756 Y101.14835
G01 X67.07723 Y101.14832
G01 X65.16862 Y101.14832
G01 X65.16831 Y101.14835
G01 X65.11551 Y101.15355
G01 X64.91947 Y101.16318
G01 X64.82638 Y101.16318
G01 X64.63034 Y101.15355
G01 X64.57759 Y101.14835
G01 X64.57723 Y101.14832
G01 X62.66862 Y101.14832
G01 X62.66832 Y101.14835
G01 X62.61551 Y101.15355
G01 X62.41948 Y101.16318
G01 X62.32638 Y101.16318
G01 X62.16596 Y101.15531
G01 X62.13177 Y101.13913
G01 X62.04919 Y101.09506
G01 X61.87586 Y100.99117
G01 X61.81168 Y100.94832
G01 X61.65250 Y100.83026
G01 X61.59972 Y100.78698
G01 X61.45430 Y100.65518
G01 X61.40807 Y100.60895
G01 X61.27627 Y100.46354
G01 X61.23299 Y100.41076
G01 X61.11493 Y100.25157
G01 X61.07208 Y100.18739
G01 X60.96820 Y100.01406
G01 X60.92413 Y99.93148
G01 X60.89906 Y99.87850
G01 X60.40467 Y99.38411
G01 X60.39466 Y99.38221
G01 X60.32936 Y99.36100
G01 X60.09108 Y99.24205
G01 X60.04097 Y99.20563
G01 X59.95626 Y99.13337
G01 X56.72807 Y95.90518
G01 X56.70318 Y95.88145
G01 X56.67770 Y95.85837
G01 X56.65014 Y95.83792
G01 X56.59287 Y95.79964
G01 X56.56343 Y95.78201
G01 X56.53237 Y95.76733
G01 X56.46876 Y95.74099
G01 X56.43643 Y95.72944
G01 X56.40310 Y95.72108
G01 X56.33567 Y95.70764
G01 X56.30163 Y95.70261
G01 X56.26739 Y95.70091
G01 X56.23295 Y95.70007
G01 X53.81992 Y95.70007
G01 X53.78551 Y95.70091
G01 X53.75122 Y95.70261
G01 X53.71721 Y95.70764
G01 X53.64974 Y95.72108
G01 X53.61642 Y95.72944
G01 X53.58409 Y95.74099
G01 X53.52048 Y95.76733
G01 X53.48942 Y95.78201
G01 X53.45998 Y95.79967
G01 X53.41076 Y95.83205
G01 X53.40270 Y95.83794
G01 X53.37515 Y95.85839
G01 X53.34967 Y95.88145
G01 X53.32478 Y95.90518
G01 X49.95308 Y99.27685
G01 X49.89105 Y99.33197
G01 X49.85453 Y99.36077
G01 X49.66603 Y99.47002
G01 X49.60485 Y99.49534
G01 X49.49100 Y99.52874
G01 X49.40553 Y99.50098
G01 X49.32593 Y99.45498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.60485 Y99.49534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X49.60485 Y99.49534
G01 X49.50878 Y99.52353
G01 X49.32593 Y99.70636
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X47.90246 Y103.08230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X47.90246 Y103.08230
G01 X47.90058 Y103.08362
G01 X47.88539 Y103.12650
G01 X47.87112 Y103.18601
G01 X47.85778 Y103.28756
G01 X47.86583 Y103.38967
G01 X47.89494 Y103.48789
G01 X47.91836 Y103.54441
G01 X47.96723 Y103.63437
G01 X48.03373 Y103.71225
G01 X48.11496 Y103.77458
G01 X48.16713 Y103.80656
G01 X48.26256 Y103.85172
G01 X48.36545 Y103.87537
G01 X48.38857 Y103.87811
G01 X48.44633 Y103.88154
G01 X85.34041 Y103.88154
G01 X85.41712 Y103.87549
G01 X85.49192 Y103.85751
G01 X85.55011 Y103.83859
G01 X85.64371 Y103.79691
G01 X85.72657 Y103.73666
G01 X85.79510 Y103.66048
G01 X85.83104 Y103.61098
G01 X85.88222 Y103.52231
G01 X85.91384 Y103.42492
G01 X85.92453 Y103.32310
G01 X85.92453 Y103.26193
G01 X85.91912 Y103.20895
G01 X85.80774 Y103.09190
G01 X85.74965 Y103.04108
G01 X85.74590 Y103.03778
G01 X85.70498 Y103.00151
G01 X85.62164 Y102.93757
G01 X85.61834 Y102.93539
G01 X85.56558 Y102.89711
G01 X85.45324 Y102.80732
G01 X85.44562 Y102.80011
G01 X85.44374 Y102.79836
G01 X85.39601 Y102.74860
G01 X85.32504 Y102.66696
G01 X85.29619 Y102.62764
G01 X85.25827 Y102.57024
G01 X85.22126 Y102.50778
G01 X85.21031 Y102.48528
G01 X85.18440 Y102.43189
G01 X85.15738 Y102.36851
G01 X85.14460 Y102.33394
G01 X85.11242 Y102.21827
G01 X85.09723 Y102.15096
G01 X85.09705 Y102.14989
G01 X85.08298 Y101.99478
G01 X85.08072 Y101.96033
G01 X85.08298 Y101.92587
G01 X85.09705 Y101.77075
G01 X85.09723 Y101.76968
G01 X85.10256 Y101.74233
G01 X85.11242 Y101.70240
G01 X85.14460 Y101.58670
G01 X85.15738 Y101.55213
G01 X85.18440 Y101.48876
G01 X85.22126 Y101.41284
G01 X85.25827 Y101.35040
G01 X85.29619 Y101.29300
G01 X85.32504 Y101.25368
G01 X85.39601 Y101.17205
G01 X85.44374 Y101.12229
G01 X85.45321 Y101.11335
G01 X85.56558 Y101.02353
G01 X85.60274 Y100.99579
G01 X85.62258 Y100.98472
G01 X85.76068 Y100.91045
G01 X85.77018 Y100.90542
G01 X85.82481 Y100.88523
G01 X85.95039 Y100.84464
G01 X85.97465 Y100.83895
G01 X86.04247 Y100.82655
G01 X86.13794 Y100.81388
G01 X86.19852 Y100.81091
G01 X86.26733 Y100.81091
G01 X86.32791 Y100.81388
G01 X86.42336 Y100.82655
G01 X86.49116 Y100.83895
G01 X86.51546 Y100.84464
G01 X86.64104 Y100.88523
G01 X86.69565 Y100.90542
G01 X86.70518 Y100.91045
G01 X86.84328 Y100.98472
G01 X86.86309 Y100.99579
G01 X86.90027 Y101.02353
G01 X87.01262 Y101.11335
G01 X87.02212 Y101.12231
G01 X87.06985 Y101.17205
G01 X87.14081 Y101.25368
G01 X87.16967 Y101.29300
G01 X87.20762 Y101.35046
G01 X87.24457 Y101.41284
G01 X87.28145 Y101.48881
G01 X87.30845 Y101.55208
G01 X87.32197 Y101.58866
G01 X87.35608 Y101.67906
G01 X87.36509 Y101.69882
G01 X87.38077 Y101.73580
G01 X87.39314 Y101.76727
G01 X87.47020 Y101.91726
G01 X87.51455 Y101.98680
G01 X87.52057 Y101.99648
G01 X87.52138 Y101.99775
G01 X87.56852 Y102.01660
G01 X87.66713 Y102.04446
G01 X87.76939 Y102.05122
G01 X87.87078 Y102.03656
G01 X87.93009 Y102.02152
G01 X87.99468 Y101.99772
G01 X87.99474 Y101.99772
G01 X88.04429 Y101.91733
G01 X88.10756 Y101.79485
G01 X88.11917 Y101.76712
G01 X88.13286 Y101.73631
G01 X88.15026 Y101.69932
G01 X88.18559 Y101.60885
G01 X88.18953 Y101.59635
G01 X88.19194 Y101.58850
G01 X88.20538 Y101.55213
G01 X88.23240 Y101.48876
G01 X88.26926 Y101.41284
G01 X88.30627 Y101.35040
G01 X88.34419 Y101.29300
G01 X88.37304 Y101.25368
G01 X88.44401 Y101.17205
G01 X88.49174 Y101.12229
G01 X88.50121 Y101.11335
G01 X88.61358 Y101.02353
G01 X88.65074 Y100.99579
G01 X88.67058 Y100.98472
G01 X88.80868 Y100.91045
G01 X88.81818 Y100.90542
G01 X88.87281 Y100.88523
G01 X88.99839 Y100.84464
G01 X89.02265 Y100.83895
G01 X89.09047 Y100.82655
G01 X89.18594 Y100.81388
G01 X89.24652 Y100.81091
G01 X89.31533 Y100.81091
G01 X89.37591 Y100.81388
G01 X89.47136 Y100.82655
G01 X89.53916 Y100.83895
G01 X89.56346 Y100.84464
G01 X89.68904 Y100.88523
G01 X89.74365 Y100.90542
G01 X89.75318 Y100.91045
G01 X89.89128 Y100.98472
G01 X89.91109 Y100.99579
G01 X89.94827 Y101.02353
G01 X90.06062 Y101.11335
G01 X90.07012 Y101.12231
G01 X90.11785 Y101.17205
G01 X90.18881 Y101.25368
G01 X90.21767 Y101.29300
G01 X90.25561 Y101.35046
G01 X90.29257 Y101.41284
G01 X90.32945 Y101.48881
G01 X90.35645 Y101.55208
G01 X90.36923 Y101.58670
G01 X90.40141 Y101.70235
G01 X90.41663 Y101.76968
G01 X90.41680 Y101.77077
G01 X90.43088 Y101.92587
G01 X90.43314 Y101.96033
G01 X90.43088 Y101.99478
G01 X90.41680 Y102.14987
G01 X90.41663 Y102.15096
G01 X90.40141 Y102.21832
G01 X90.36923 Y102.33394
G01 X90.35645 Y102.36856
G01 X90.32945 Y102.43183
G01 X90.29257 Y102.50781
G01 X90.25561 Y102.57019
G01 X90.21767 Y102.62764
G01 X90.18881 Y102.66696
G01 X90.11785 Y102.74860
G01 X90.07012 Y102.79833
G01 X90.06062 Y102.80730
G01 X89.94827 Y102.89711
G01 X89.89552 Y102.93542
G01 X89.89222 Y102.93757
G01 X89.80431 Y103.00560
G01 X89.76816 Y103.03813
G01 X89.75734 Y103.04771
G01 X89.70616 Y103.09216
G01 X89.59372 Y103.20946
G01 X89.57924 Y103.21385
G01 X89.48503 Y103.23257
G01 X89.32897 Y103.24796
G01 X89.23291 Y103.24796
G01 X89.07683 Y103.23257
G01 X88.98262 Y103.21385
G01 X88.83255 Y103.16831
G01 X88.74381 Y103.13155
G01 X88.60550 Y103.05764
G01 X88.52562 Y103.00427
G01 X88.40439 Y102.90478
G01 X88.33647 Y102.83686
G01 X88.23698 Y102.71563
G01 X88.18361 Y102.63575
G01 X88.10970 Y102.49744
G01 X88.07294 Y102.40870
G01 X88.05323 Y102.34377
G01 X88.02740 Y102.25863
G01 X88.00868 Y102.16442
G01 X87.99329 Y102.00834
G01 X87.99329 Y102.00003
G01 X87.99468 Y101.99772
G01 X88.04429 Y101.91733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.59372 Y103.20946 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.59372 Y103.20946
G01 X89.58861 Y103.28134
G01 X89.59064 Y103.34248
G01 X89.60471 Y103.44395
G01 X89.63893 Y103.53841
G01 X89.63959 Y103.54027
G01 X89.69372 Y103.62721
G01 X89.73131 Y103.67549
G01 X89.80024 Y103.74753
G01 X89.88229 Y103.80410
G01 X89.97411 Y103.84291
G01 X90.02961 Y103.85995
G01 X90.10073 Y103.87610
G01 X90.17347 Y103.88154
G01 X100.32994 Y103.88154
G01 X100.40665 Y103.87549
G01 X100.48145 Y103.85751
G01 X100.53964 Y103.83859
G01 X100.63319 Y103.79693
G01 X100.71602 Y103.73673
G01 X100.78455 Y103.66061
G01 X100.82052 Y103.61111
G01 X100.87675 Y103.51067
G01 X100.90804 Y103.39988
G01 X100.91290 Y103.36930
G01 X100.91894 Y103.29251
G01 X100.91894 Y101.24174
G01 X100.91290 Y101.16504
G01 X100.89491 Y101.09023
G01 X100.87599 Y101.03204
G01 X100.83433 Y100.93849
G01 X100.77414 Y100.85566
G01 X100.69801 Y100.78713
G01 X100.64851 Y100.75117
G01 X100.55981 Y100.69996
G01 X100.46238 Y100.66831
G01 X100.36052 Y100.65759
G01 X100.29933 Y100.65759
G01 X100.20998 Y100.66580
G01 X100.12364 Y100.69018
G01 X100.04320 Y100.72988
G01 X100.00380 Y100.75404
G01 X99.91343 Y100.82526
G01 X99.90269 Y100.83603
G01 X99.74564 Y100.95653
G01 X99.74493 Y100.95693
G01 X99.74493 Y100.92622
G01 X99.77137 Y100.90855
G01 X99.92291 Y100.78419
G01 X99.99083 Y100.71627
G01 X100.11518 Y100.56473
G01 X100.16855 Y100.48487
G01 X100.26095 Y100.31198
G01 X100.29771 Y100.22323
G01 X100.35463 Y100.03565
G01 X100.37337 Y99.94144
G01 X100.39258 Y99.74634
G01 X100.39494 Y99.69831
G01 X100.39494 Y98.19832
G01 X100.39258 Y98.15028
G01 X100.37337 Y97.95519
G01 X100.35463 Y97.86098
G01 X100.29771 Y97.67340
G01 X100.26095 Y97.58465
G01 X100.16855 Y97.41175
G01 X100.11518 Y97.33190
G01 X99.99083 Y97.18036
G01 X99.92291 Y97.11244
G01 X99.77137 Y96.98806
G01 X99.74493 Y96.97040
G01 X99.74493 Y96.82489
G01 X99.75537 Y96.82461
G01 X99.85501 Y96.80068
G01 X99.94752 Y96.75653
G01 X99.99966 Y96.72456
G01 X100.08084 Y96.66222
G01 X100.14731 Y96.58437
G01 X100.19616 Y96.49443
G01 X100.21958 Y96.43792
G01 X100.24800 Y96.34333
G01 X100.25689 Y96.24498
G01 X100.24587 Y96.14683
G01 X100.23385 Y96.09123
G01 X100.18392 Y95.95801
G01 X99.40944 Y94.55433
G01 X98.88986 Y93.62352
G01 X95.47788 Y87.51116
G01 X95.20892 Y87.02935
G01 X95.13008 Y86.91111
G01 X95.09180 Y86.86245
G01 X95.07323 Y86.83959
G01 X94.86439 Y86.79054
G01 X94.82137 Y86.78582
G01 X94.73046 Y86.78084
G01 X85.72217 Y86.78084
G01 X85.70508 Y86.78066
G01 X85.69278 Y86.78041
G01 X85.56596 Y86.76806
G01 X85.48885 Y86.75465
G01 X85.32273 Y86.70433
G01 X85.24209 Y86.70433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.25463 Y86.60720 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.25463 Y86.60720
G01 X85.26314 Y86.65381
G01 X85.26312 Y86.65381
G01 X85.26375 Y86.65722
G01 X85.26388 Y86.65798
G01 X85.30538 Y86.69907
G01 X85.32273 Y86.70433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.48884 Y91.51926 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.48884 Y91.51926
G01 X87.52364 Y91.52467
G01 X87.58475 Y91.52772
G01 X87.68707 Y91.52208
G01 X87.78600 Y91.49531
G01 X87.81577 Y91.48002
G01 X87.87718 Y91.44852
G01 X87.92842 Y91.41504
G01 X88.00309 Y91.35507
G01 X88.06466 Y91.28172
G01 X88.07327 Y91.26914
G01 X88.09336 Y91.23727
G01 X88.19552 Y91.06031
G01 X88.31793 Y90.90681
G01 X88.44091 Y90.79269
G01 X88.44091 Y90.82589
G01 X88.40439 Y90.85586
G01 X88.33647 Y90.92378
G01 X88.23698 Y91.04501
G01 X88.18361 Y91.12487
G01 X88.10970 Y91.26318
G01 X88.07294 Y91.35192
G01 X88.02740 Y91.50201
G01 X88.00868 Y91.59622
G01 X87.99329 Y91.75228
G01 X87.99329 Y91.84834
G01 X87.99804 Y91.89637
G01 X88.00868 Y92.00442
G01 X88.02740 Y92.09863
G01 X88.07294 Y92.24870
G01 X88.10970 Y92.33744
G01 X88.18361 Y92.47575
G01 X88.23698 Y92.55563
G01 X88.33647 Y92.67686
G01 X88.40439 Y92.74478
G01 X88.44091 Y92.77473
G01 X88.44091 Y92.80798
G01 X88.31793 Y92.69386
G01 X88.19550 Y92.54034
G01 X88.09334 Y92.36338
G01 X88.04980 Y92.30003
G01 X87.99689 Y92.24428
G01 X87.95143 Y92.20333
G01 X87.86857 Y92.14311
G01 X87.77497 Y92.10145
G01 X87.67477 Y92.08014
G01 X87.61391 Y92.07374
G01 X87.51150 Y92.07374
G01 X87.49032 Y92.07821
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.12092 Y90.79269 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.12092 Y90.79269
G01 X90.24391 Y90.90681
G01 X90.28660 Y90.96033
G01 X90.25541 Y90.96033
G01 X90.22539 Y90.92378
G01 X90.15747 Y90.85586
G01 X90.12092 Y90.82584
G01 X90.12092 Y90.79269
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X92.01230 Y90.81233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X92.01230 Y90.81233
G01 X92.01459 Y90.77781
G01 X92.02866 Y90.62279
G01 X92.02884 Y90.62162
G01 X92.04403 Y90.55439
G01 X92.07621 Y90.43872
G01 X92.08899 Y90.40412
G01 X92.11599 Y90.34080
G01 X92.15287 Y90.26485
G01 X92.18982 Y90.20245
G01 X92.22777 Y90.14502
G01 X92.25663 Y90.10567
G01 X92.32759 Y90.02404
G01 X92.37535 Y89.97430
G01 X92.38482 Y89.96536
G01 X92.49716 Y89.87555
G01 X92.53435 Y89.84779
G01 X92.55416 Y89.83671
G01 X92.66963 Y89.77461
G01 X92.69226 Y89.76244
G01 X92.69983 Y89.75843
G01 X92.70176 Y89.75744
G01 X92.75647 Y89.73719
G01 X92.88200 Y89.69663
G01 X92.90633 Y89.69094
G01 X92.97402 Y89.67857
G01 X93.06950 Y89.66590
G01 X93.13008 Y89.66292
G01 X93.19899 Y89.66292
G01 X93.25955 Y89.66590
G01 X93.35502 Y89.67857
G01 X93.42272 Y89.69094
G01 X93.44705 Y89.69663
G01 X93.57258 Y89.73719
G01 X93.62724 Y89.75741
G01 X93.63679 Y89.76244
G01 X93.77489 Y89.83671
G01 X93.79470 Y89.84779
G01 X93.83188 Y89.87555
G01 X93.94423 Y89.96536
G01 X93.95370 Y89.97430
G01 X94.00145 Y90.02404
G01 X94.07242 Y90.10567
G01 X94.10128 Y90.14502
G01 X94.13922 Y90.20245
G01 X94.17618 Y90.26485
G01 X94.21306 Y90.34080
G01 X94.24006 Y90.40412
G01 X94.25284 Y90.43869
G01 X94.28502 Y90.55439
G01 X94.30021 Y90.62162
G01 X94.30041 Y90.62279
G01 X94.31446 Y90.77781
G01 X94.31674 Y90.81233
G01 X94.31448 Y90.84682
G01 X94.30041 Y91.00186
G01 X94.30021 Y91.00300
G01 X94.28502 Y91.07026
G01 X94.25284 Y91.18596
G01 X94.24006 Y91.22053
G01 X94.21306 Y91.28385
G01 X94.17618 Y91.35980
G01 X94.13922 Y91.42220
G01 X94.10128 Y91.47963
G01 X94.07242 Y91.51898
G01 X94.00145 Y91.60061
G01 X93.95370 Y91.65035
G01 X93.94423 Y91.65931
G01 X93.83188 Y91.74910
G01 X93.79475 Y91.77684
G01 X93.77489 Y91.78794
G01 X93.63679 Y91.86221
G01 X93.62724 Y91.86724
G01 X93.57258 Y91.88746
G01 X93.44705 Y91.92802
G01 X93.42272 Y91.93371
G01 X93.35502 Y91.94608
G01 X93.25955 Y91.95875
G01 X93.19899 Y91.96173
G01 X93.13008 Y91.96173
G01 X93.06950 Y91.95875
G01 X92.97402 Y91.94608
G01 X92.90633 Y91.93371
G01 X92.88200 Y91.92802
G01 X92.75647 Y91.88746
G01 X92.70181 Y91.86724
G01 X92.69226 Y91.86221
G01 X92.55416 Y91.78794
G01 X92.53435 Y91.77687
G01 X92.49716 Y91.74910
G01 X92.38482 Y91.65929
G01 X92.37535 Y91.65035
G01 X92.32759 Y91.60061
G01 X92.29242 Y91.56013
G01 X92.25663 Y91.51898
G01 X92.22777 Y91.47963
G01 X92.18982 Y91.42220
G01 X92.15287 Y91.35980
G01 X92.11599 Y91.28385
G01 X92.08899 Y91.22053
G01 X92.07621 Y91.18596
G01 X92.04403 Y91.07026
G01 X92.02884 Y91.00300
G01 X92.02864 Y91.00186
G01 X92.01456 Y90.84682
G01 X92.01230 Y90.81233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.12092 Y92.77478 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.12092 Y92.77478
G01 X90.15747 Y92.74478
G01 X90.22539 Y92.67686
G01 X90.25536 Y92.64034
G01 X90.28660 Y92.64034
G01 X90.24391 Y92.69386
G01 X90.12092 Y92.80798
G01 X90.12092 Y92.77478
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.15492 Y97.45742 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.15492 Y97.45742
G01 X95.12116 Y97.43710
G01 X95.04517 Y97.38938
G01 X94.96925 Y97.33538
G01 X94.92055 Y97.29621
G01 X94.88588 Y97.26649
G01 X94.83475 Y97.21981
G01 X94.79480 Y97.18361
G01 X94.68342 Y97.09522
G01 X94.65589 Y97.07444
G01 X94.62614 Y97.05694
G01 X94.50181 Y96.98785
G01 X94.46907 Y96.97236
G01 X94.45309 Y96.96479
G01 X94.38954 Y96.93848
G01 X94.33877 Y96.92031
G01 X94.20206 Y96.88127
G01 X94.16861 Y96.87261
G01 X94.13445 Y96.86781
G01 X93.99317 Y96.85156
G01 X93.93930 Y96.84891
G01 X93.87054 Y96.84891
G01 X93.81667 Y96.85156
G01 X93.67539 Y96.86781
G01 X93.64123 Y96.87261
G01 X93.60778 Y96.88127
G01 X93.47110 Y96.92029
G01 X93.42216 Y96.93781
G01 X93.42030 Y96.93850
G01 X93.35675 Y96.96482
G01 X93.30798 Y96.98788
G01 X93.18370 Y97.05694
G01 X93.17027 Y97.06459
G01 X93.15401 Y97.07442
G01 X93.12642 Y97.09522
G01 X93.01502 Y97.18361
G01 X92.97509 Y97.21981
G01 X92.92640 Y97.26850
G01 X92.89020 Y97.30845
G01 X92.80181 Y97.41983
G01 X92.78106 Y97.44734
G01 X92.76353 Y97.47711
G01 X92.76216 Y97.47960
G01 X92.69447 Y97.60142
G01 X92.67141 Y97.65016
G01 X92.64507 Y97.71373
G01 X92.62691 Y97.76451
G01 X92.58787 Y97.90124
G01 X92.57921 Y97.93464
G01 X92.57443 Y97.96878
G01 X92.55815 Y98.11008
G01 X92.55551 Y98.16390
G01 X92.55467 Y98.19832
G01 X92.55467 Y99.69831
G01 X92.55551 Y99.73275
G01 X92.55815 Y99.78658
G01 X92.57443 Y99.92788
G01 X92.57921 Y99.96201
G01 X92.58787 Y99.99542
G01 X92.62691 Y100.13214
G01 X92.64507 Y100.18292
G01 X92.67141 Y100.24649
G01 X92.69447 Y100.29526
G01 X92.76353 Y100.41955
G01 X92.78104 Y100.44931
G01 X92.80181 Y100.47682
G01 X92.89020 Y100.58820
G01 X92.92640 Y100.62816
G01 X92.97509 Y100.67685
G01 X93.01502 Y100.71304
G01 X93.12642 Y100.80143
G01 X93.15396 Y100.82221
G01 X93.18370 Y100.83971
G01 X93.30801 Y100.90877
G01 X93.35675 Y100.93184
G01 X93.42030 Y100.95818
G01 X93.47110 Y100.97634
G01 X93.60778 Y101.01538
G01 X93.64123 Y101.02404
G01 X93.67539 Y101.02884
G01 X93.81667 Y101.04510
G01 X93.87054 Y101.04774
G01 X93.93930 Y101.04774
G01 X93.99317 Y101.04510
G01 X94.13445 Y101.02884
G01 X94.16861 Y101.02407
G01 X94.20206 Y101.01538
G01 X94.26650 Y100.99696
G01 X94.33879 Y100.97634
G01 X94.38954 Y100.95818
G01 X94.45309 Y100.93186
G01 X94.50183 Y100.90880
G01 X94.62614 Y100.83971
G01 X94.65589 Y100.82221
G01 X94.68342 Y100.80143
G01 X94.79480 Y100.71304
G01 X94.83475 Y100.67685
G01 X94.87763 Y100.63771
G01 X94.88581 Y100.63011
G01 X94.90039 Y100.61637
G01 X95.04672 Y100.50857
G01 X95.04712 Y100.50834
G01 X95.10348 Y100.47314
G01 X95.12251 Y100.46026
G01 X95.15492 Y100.43923
G01 X95.15492 Y97.45742
G01 X95.18733 Y97.43639
G01 X95.20635 Y97.42351
G01 X95.26272 Y97.38831
G01 X95.26312 Y97.38808
G01 X95.40933 Y97.28041
G01 X95.42403 Y97.26654
G01 X95.43211 Y97.25905
G01 X95.47316 Y97.22158
G01 X95.51507 Y97.18359
G01 X95.62642 Y97.09522
G01 X95.65395 Y97.07444
G01 X95.68370 Y97.05694
G01 X95.80800 Y96.98788
G01 X95.85675 Y96.96482
G01 X95.92030 Y96.93848
G01 X95.97110 Y96.92031
G01 X96.10783 Y96.88125
G01 X96.14123 Y96.87261
G01 X96.17542 Y96.86781
G01 X96.31666 Y96.85156
G01 X96.37051 Y96.84891
G01 X96.43930 Y96.84891
G01 X96.49317 Y96.85156
G01 X96.63444 Y96.86781
G01 X96.66861 Y96.87261
G01 X96.70203 Y96.88127
G01 X96.83876 Y96.92031
G01 X96.88956 Y96.93848
G01 X96.95314 Y96.96482
G01 X97.00180 Y96.98783
G01 X97.12616 Y97.05694
G01 X97.15682 Y97.07500
G01 X97.18428 Y97.09418
G01 X97.24239 Y97.13070
G01 X97.29647 Y97.16123
G01 X97.35745 Y97.19217
G01 X97.43409 Y97.22692
G01 X97.55776 Y97.27337
G01 X97.57028 Y97.27723
G01 X97.61519 Y97.33190
G01 X97.65491 Y97.39136
G01 X97.65491 Y97.64132
G01 X97.65494 Y97.71673
G01 X97.65494 Y97.92158
G01 X97.65491 Y97.97673
G01 X97.65491 Y99.91993
G01 X97.65494 Y99.97507
G01 X97.65494 Y100.17992
G01 X97.65491 Y100.25533
G01 X97.65491 Y100.50519
G01 X97.61519 Y100.56473
G01 X97.56650 Y100.62407
G01 X97.43457 Y100.67012
G01 X97.37701 Y100.69770
G01 X97.35880 Y100.70616
G01 X97.31923 Y100.72394
G01 X97.19009 Y100.79818
G01 X97.18423 Y100.80240
G01 X97.17534 Y100.80872
G01 X97.15682 Y100.82165
G01 X97.12616 Y100.83971
G01 X97.00183 Y100.90880
G01 X96.95314 Y100.93184
G01 X96.88956 Y100.95818
G01 X96.83879 Y100.97634
G01 X96.76655 Y100.99696
G01 X96.70203 Y101.01538
G01 X96.66861 Y101.02407
G01 X96.63444 Y101.02884
G01 X96.49317 Y101.04510
G01 X96.43930 Y101.04774
G01 X96.37051 Y101.04774
G01 X96.31666 Y101.04510
G01 X96.17542 Y101.02884
G01 X96.14123 Y101.02404
G01 X96.10783 Y101.01540
G01 X95.97110 Y100.97634
G01 X95.92030 Y100.95818
G01 X95.85675 Y100.93184
G01 X95.80800 Y100.90877
G01 X95.68370 Y100.83971
G01 X95.65395 Y100.82221
G01 X95.62642 Y100.80143
G01 X95.51507 Y100.71307
G01 X95.47316 Y100.67507
G01 X95.42398 Y100.63016
G01 X95.38926 Y100.60042
G01 X95.34054 Y100.56123
G01 X95.26467 Y100.50728
G01 X95.18868 Y100.45955
G01 X95.15492 Y100.43923
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.56650 Y100.62407 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.56650 Y100.62407
G01 X97.57968 Y100.61947
G01 X97.66116 Y100.65071
G01 X97.71567 Y100.67847
G01 X97.78125 Y100.71868
G01 X97.83978 Y100.76862
G01 X97.90716 Y100.83603
G01 X98.06421 Y100.95653
G01 X98.06492 Y100.95693
G01 X98.06492 Y100.92620
G01 X98.03851 Y100.90855
G01 X97.88697 Y100.78419
G01 X97.81905 Y100.71627
G01 X97.69469 Y100.56473
G01 X97.65491 Y100.50519
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.65491 Y97.39136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.65491 Y97.39136
G01 X97.69469 Y97.33190
G01 X97.81905 Y97.18036
G01 X97.88697 Y97.11244
G01 X98.03851 Y96.98806
G01 X98.06492 Y96.97043
G01 X98.06492 Y96.93972
G01 X98.06421 Y96.94013
G01 X97.90716 Y97.06062
G01 X97.83978 Y97.12804
G01 X97.83249 Y97.13466
G01 X97.80670 Y97.15819
G01 X97.79279 Y97.16977
G01 X97.71039 Y97.22524
G01 X97.61849 Y97.26296
G01 X97.57028 Y97.27723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X103.29920 Y93.90993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X103.29920 Y93.90993
G01 X103.29928 Y93.90884
G01 X103.30387 Y93.89162
G01 X103.30464 Y93.89032
G01 X103.30568 Y93.88928
G01 X103.30697 Y93.88852
G01 X103.30845 Y93.88814
G01 X103.30994 Y93.88814
G01 X103.31142 Y93.88852
G01 X103.31271 Y93.88928
G01 X103.31378 Y93.89032
G01 X103.31454 Y93.89167
G01 X103.31911 Y93.90876
G01 X103.31919 Y93.90986
G01 X103.31919 Y96.01104
G01 X103.32912 Y96.10924
G01 X103.35854 Y96.20342
G01 X103.40621 Y96.28984
G01 X103.47024 Y96.36492
G01 X103.54802 Y96.42565
G01 X103.63639 Y96.46957
G01 X103.73176 Y96.49489
G01 X103.83026 Y96.50060
G01 X103.92793 Y96.48646
G01 X104.02076 Y96.45303
G01 X104.10504 Y96.40167
G01 X104.17730 Y96.33449
G01 X104.23463 Y96.25417
G01 X105.57827 Y93.90284
G01 X105.57893 Y93.90183
G01 X105.59137 Y93.88928
G01 X105.59269 Y93.88852
G01 X105.59409 Y93.88814
G01 X105.59561 Y93.88814
G01 X105.59714 Y93.88852
G01 X105.59838 Y93.88923
G01 X105.59950 Y93.89035
G01 X105.60024 Y93.89159
G01 X105.60069 Y93.89332
G01 X105.60473 Y93.90810
G01 X105.60491 Y93.91069
G01 X105.60491 Y97.87784
G01 X105.60483 Y97.87894
G01 X105.60026 Y97.89603
G01 X105.59953 Y97.89733
G01 X105.59843 Y97.89842
G01 X105.59714 Y97.89918
G01 X105.59567 Y97.89956
G01 X105.59417 Y97.89956
G01 X105.59269 Y97.89918
G01 X105.59140 Y97.89842
G01 X105.59033 Y97.89738
G01 X105.58957 Y97.89603
G01 X105.58500 Y97.87894
G01 X105.58492 Y97.87784
G01 X105.58492 Y95.77663
G01 X105.57499 Y95.67846
G01 X105.54558 Y95.58427
G01 X105.49790 Y95.49786
G01 X105.43387 Y95.42278
G01 X105.35609 Y95.36205
G01 X105.26773 Y95.31813
G01 X105.17235 Y95.29281
G01 X105.07385 Y95.28709
G01 X104.97618 Y95.30124
G01 X104.88335 Y95.33467
G01 X104.79907 Y95.38603
G01 X104.72681 Y95.45321
G01 X104.66948 Y95.53352
G01 X103.32587 Y97.88485
G01 X103.32524 Y97.88579
G01 X103.31274 Y97.89842
G01 X103.31144 Y97.89918
G01 X103.31002 Y97.89956
G01 X103.30847 Y97.89956
G01 X103.30697 Y97.89918
G01 X103.30573 Y97.89847
G01 X103.30461 Y97.89735
G01 X103.30387 Y97.89611
G01 X103.30342 Y97.89438
G01 X103.29938 Y97.87960
G01 X103.29920 Y97.87701
G01 X103.29920 Y93.90993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X107.29919 Y94.67191 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X107.29919 Y94.67191
G01 X107.29927 Y94.67069
G01 X107.29983 Y94.66855
G01 X107.30656 Y94.64011
G01 X107.30699 Y94.63800
G01 X107.30740 Y94.63698
G01 X107.48360 Y94.28461
G01 X107.49241 Y94.26954
G01 X107.50394 Y94.25639
G01 X107.67173 Y94.08860
G01 X107.68489 Y94.07706
G01 X107.69995 Y94.06825
G01 X108.05233 Y93.89205
G01 X108.05334 Y93.89164
G01 X108.05545 Y93.89121
G01 X108.08390 Y93.88448
G01 X108.08603 Y93.88392
G01 X108.08725 Y93.88385
G01 X108.62639 Y93.88385
G01 X108.62761 Y93.88392
G01 X108.62982 Y93.88451
G01 X108.65819 Y93.89121
G01 X108.66033 Y93.89164
G01 X108.66137 Y93.89208
G01 X109.01364 Y94.06825
G01 X109.02875 Y94.07706
G01 X109.04184 Y94.08854
G01 X109.20968 Y94.25636
G01 X109.22124 Y94.26954
G01 X109.23010 Y94.28468
G01 X109.40615 Y94.63680
G01 X109.40663 Y94.63795
G01 X109.40706 Y94.64011
G01 X109.41384 Y94.66878
G01 X109.41438 Y94.67076
G01 X109.41443 Y94.67168
G01 X109.41443 Y95.78270
G01 X109.41438 Y95.78361
G01 X109.41382 Y95.78565
G01 X109.40706 Y95.81427
G01 X109.40663 Y95.81640
G01 X109.40617 Y95.81747
G01 X109.23010 Y96.16964
G01 X109.22121 Y96.18486
G01 X109.20970 Y96.19799
G01 X109.16889 Y96.23878
G01 X109.04194 Y96.36573
G01 X109.02873 Y96.37731
G01 X109.01359 Y96.38618
G01 X108.66119 Y96.56235
G01 X108.66040 Y96.56268
G01 X108.65845 Y96.56309
G01 X108.62957 Y96.56990
G01 X108.62754 Y96.57045
G01 X108.62662 Y96.57051
G01 X108.08702 Y96.57051
G01 X108.08611 Y96.57045
G01 X108.08413 Y96.56992
G01 X108.05520 Y96.56309
G01 X108.05329 Y96.56271
G01 X108.05215 Y96.56222
G01 X107.70003 Y96.38618
G01 X107.68489 Y96.37731
G01 X107.67168 Y96.36573
G01 X107.50394 Y96.19799
G01 X107.49241 Y96.18486
G01 X107.48357 Y96.16972
G01 X107.30737 Y95.81729
G01 X107.30699 Y95.81635
G01 X107.30656 Y95.81427
G01 X107.29985 Y95.78590
G01 X107.29927 Y95.78369
G01 X107.29919 Y95.78247
G01 X107.29919 Y94.67191
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X107.31918 Y94.77379 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X107.31918 Y94.77379
G01 X107.33229 Y94.66121
G01 X107.37092 Y94.55463
G01 X107.47234 Y94.35182
G01 X107.51311 Y94.28445
G01 X107.56411 Y94.22449
G01 X107.63983 Y94.14877
G01 X107.69980 Y94.09776
G01 X107.76716 Y94.05700
G01 X107.96998 Y93.95558
G01 X108.07656 Y93.91694
G01 X108.18916 Y93.90384
G01 X108.52451 Y93.90384
G01 X108.63711 Y93.91694
G01 X108.74369 Y93.95560
G01 X108.94648 Y94.05702
G01 X109.01379 Y94.09774
G01 X109.07371 Y94.14872
G01 X109.14946 Y94.22443
G01 X109.20054 Y94.28445
G01 X109.24133 Y94.35187
G01 X109.34272 Y94.55469
G01 X109.38133 Y94.66124
G01 X109.39444 Y94.77379
G01 X109.39444 Y95.68057
G01 X109.38133 Y95.79314
G01 X109.34272 Y95.89969
G01 X109.24133 Y96.10251
G01 X109.20054 Y96.16992
G01 X109.14946 Y96.22994
G01 X109.07371 Y96.30566
G01 X109.01377 Y96.35664
G01 X108.94643 Y96.39738
G01 X108.74364 Y96.49878
G01 X108.63709 Y96.53741
G01 X108.52451 Y96.55052
G01 X108.18916 Y96.55052
G01 X108.07659 Y96.53741
G01 X107.97003 Y96.49880
G01 X107.76721 Y96.39740
G01 X107.69983 Y96.35664
G01 X107.63983 Y96.30561
G01 X107.56411 Y96.22989
G01 X107.51311 Y96.16992
G01 X107.47234 Y96.10256
G01 X107.37092 Y95.89974
G01 X107.33229 Y95.79316
G01 X107.31918 Y95.68057
G01 X107.31918 Y94.77379
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X110.73200 Y96.56080 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X110.73200 Y96.56080
G01 X110.73345 Y96.54305
G01 X110.73376 Y96.54198
G01 X111.67538 Y93.90551
G01 X111.67917 Y93.89677
G01 X111.68519 Y93.88893
G01 X111.68664 Y93.88778
G01 X111.68831 Y93.88710
G01 X111.69014 Y93.88687
G01 X111.69202 Y93.88710
G01 X111.69365 Y93.88778
G01 X111.69509 Y93.88890
G01 X111.70114 Y93.89675
G01 X111.70495 Y93.90559
G01 X111.85097 Y94.31440
G01 X112.64655 Y96.54206
G01 X112.64686 Y96.54312
G01 X112.64831 Y96.56080
G01 X112.64803 Y96.56228
G01 X112.64737 Y96.56365
G01 X112.64638 Y96.56482
G01 X112.64516 Y96.56565
G01 X112.64376 Y96.56616
G01 X112.64226 Y96.56629
G01 X112.64076 Y96.56601
G01 X112.63942 Y96.56537
G01 X112.63827 Y96.56438
G01 X112.62814 Y96.54975
G01 X112.62771 Y96.54876
G01 X112.15161 Y95.21564
G01 X112.11247 Y95.13193
G01 X112.05829 Y95.05707
G01 X111.99100 Y94.99370
G01 X111.91303 Y94.94407
G01 X111.82715 Y94.90998
G01 X111.73637 Y94.89263
G01 X111.64394 Y94.89263
G01 X111.55316 Y94.90998
G01 X111.46728 Y94.94407
G01 X111.38930 Y94.99370
G01 X111.32202 Y95.05707
G01 X111.26784 Y95.13193
G01 X111.22870 Y95.21564
G01 X110.75260 Y96.54876
G01 X110.75217 Y96.54975
G01 X110.74206 Y96.56436
G01 X110.74089 Y96.56535
G01 X110.73952 Y96.56601
G01 X110.73805 Y96.56629
G01 X110.73655 Y96.56616
G01 X110.73513 Y96.56565
G01 X110.73391 Y96.56482
G01 X110.73294 Y96.56367
G01 X110.73228 Y96.56228
G01 X110.73200 Y96.56080
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.97015 Y94.08357 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.97015 Y94.08357
G01 X113.97053 Y94.08214
G01 X113.97944 Y94.06673
G01 X113.98018 Y94.06586
G01 X114.14787 Y93.89817
G01 X114.14876 Y93.89741
G01 X114.16410 Y93.88854
G01 X114.16560 Y93.88814
G01 X114.16707 Y93.88814
G01 X114.16857 Y93.88852
G01 X114.18391 Y93.89741
G01 X114.18475 Y93.89812
G01 X114.35254 Y94.06591
G01 X114.35326 Y94.06673
G01 X114.36215 Y94.08212
G01 X114.36253 Y94.08357
G01 X114.36253 Y94.08509
G01 X114.36215 Y94.08656
G01 X114.35328 Y94.10190
G01 X114.35254 Y94.10274
G01 X114.18475 Y94.27054
G01 X114.18391 Y94.27127
G01 X114.16857 Y94.28014
G01 X114.16710 Y94.28052
G01 X114.16560 Y94.28052
G01 X114.16415 Y94.28014
G01 X114.14871 Y94.27122
G01 X114.14787 Y94.27048
G01 X113.98013 Y94.10274
G01 X113.97942 Y94.10193
G01 X113.97053 Y94.08654
G01 X113.97015 Y94.08509
G01 X113.97015 Y94.08357
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.74711 Y89.13059 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.74711 Y89.13059
G01 X111.74752 Y89.14436
G01 X111.74887 Y89.14957
G01 X112.69108 Y91.97620
G01 X112.69151 Y91.97725
G01 X112.70134 Y91.99210
G01 X112.70246 Y91.99312
G01 X112.70378 Y91.99378
G01 X112.70525 Y91.99409
G01 X112.70675 Y91.99398
G01 X112.70822 Y91.99350
G01 X112.70947 Y91.99266
G01 X112.71043 Y91.99157
G01 X112.71115 Y91.99020
G01 X112.71145 Y91.98870
G01 X112.71038 Y91.97105
G01 X112.71010 Y91.96998
G01 X111.98214 Y89.78614
G01 X111.96129 Y89.69592
G01 X111.95778 Y89.60339
G01 X111.97175 Y89.51185
G01 X112.00269 Y89.42457
G01 X112.04950 Y89.34469
G01 X112.11049 Y89.27502
G01 X112.18351 Y89.21807
G01 X112.26593 Y89.17588
G01 X112.35481 Y89.14995
G01 X112.44701 Y89.14118
G01 X113.15806 Y89.14118
G01 X113.25364 Y89.15061
G01 X113.34556 Y89.17850
G01 X113.43027 Y89.22376
G01 X113.50454 Y89.28469
G01 X113.56547 Y89.35896
G01 X113.61074 Y89.44367
G01 X113.63863 Y89.53559
G01 X113.64805 Y89.63117
G01 X113.64805 Y90.44842
G01 X113.64813 Y90.44951
G01 X113.65272 Y90.46673
G01 X113.65349 Y90.46803
G01 X113.65453 Y90.46910
G01 X113.65587 Y90.46986
G01 X113.65730 Y90.47024
G01 X113.65882 Y90.47024
G01 X113.66024 Y90.46986
G01 X113.66159 Y90.46910
G01 X113.66263 Y90.46803
G01 X113.66339 Y90.46673
G01 X113.66799 Y90.44951
G01 X113.66806 Y90.44842
G01 X113.66806 Y89.63117
G01 X113.67749 Y89.53559
G01 X113.70538 Y89.44367
G01 X113.75064 Y89.35896
G01 X113.81157 Y89.28469
G01 X113.88584 Y89.22376
G01 X113.97055 Y89.17850
G01 X114.06248 Y89.15061
G01 X114.15808 Y89.14118
G01 X114.21340 Y89.14118
G01 X114.21450 Y89.14111
G01 X114.23172 Y89.13651
G01 X114.23301 Y89.13575
G01 X114.23405 Y89.13471
G01 X114.23482 Y89.13341
G01 X114.23520 Y89.13194
G01 X114.23520 Y89.13044
G01 X114.23482 Y89.12897
G01 X114.23405 Y89.12767
G01 X114.23301 Y89.12660
G01 X114.23167 Y89.12584
G01 X114.21457 Y89.12127
G01 X114.21348 Y89.12119
G01 X114.15808 Y89.12119
G01 X114.06248 Y89.11177
G01 X113.97055 Y89.08388
G01 X113.88584 Y89.03862
G01 X113.81157 Y88.97768
G01 X113.75064 Y88.90341
G01 X113.70538 Y88.81870
G01 X113.67749 Y88.72678
G01 X113.66806 Y88.63118
G01 X113.66806 Y87.81393
G01 X113.66799 Y87.81284
G01 X113.66339 Y87.79562
G01 X113.66263 Y87.79432
G01 X113.66159 Y87.79328
G01 X113.66029 Y87.79252
G01 X113.65882 Y87.79214
G01 X113.65730 Y87.79214
G01 X113.65582 Y87.79252
G01 X113.65453 Y87.79328
G01 X113.65349 Y87.79432
G01 X113.65272 Y87.79562
G01 X113.64813 Y87.81284
G01 X113.64805 Y87.81393
G01 X113.64805 Y88.63118
G01 X113.63863 Y88.72678
G01 X113.61074 Y88.81870
G01 X113.56547 Y88.90341
G01 X113.50454 Y88.97768
G01 X113.43027 Y89.03862
G01 X113.34556 Y89.08388
G01 X113.25364 Y89.11177
G01 X113.15806 Y89.12119
G01 X111.76929 Y89.12119
G01 X111.76403 Y89.12152
G01 X111.75070 Y89.12554
G01 X111.74937 Y89.12635
G01 X111.74823 Y89.12757
G01 X111.74749 Y89.12894
G01 X111.74711 Y89.13059
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X107.74758 Y87.79707 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X107.74758 Y87.79707
G01 X107.74758 Y87.79859
G01 X107.74799 Y87.80011
G01 X107.75682 Y87.81543
G01 X107.75756 Y87.81627
G01 X109.94849 Y90.00717
G01 X110.01882 Y90.09607
G01 X110.06685 Y90.19871
G01 X110.19434 Y90.58119
G01 X110.21316 Y90.65766
G01 X110.21948 Y90.73613
G01 X110.21948 Y90.91789
G01 X110.20638 Y91.03046
G01 X110.16777 Y91.13701
G01 X110.06637 Y91.33983
G01 X110.02560 Y91.40722
G01 X109.97457 Y91.46721
G01 X109.89886 Y91.54293
G01 X109.83889 Y91.59393
G01 X109.77153 Y91.63470
G01 X109.56871 Y91.73612
G01 X109.46213 Y91.77476
G01 X109.34956 Y91.78786
G01 X108.63325 Y91.78786
G01 X108.52065 Y91.77476
G01 X108.41407 Y91.73612
G01 X108.21126 Y91.63470
G01 X108.14390 Y91.59393
G01 X108.08393 Y91.54293
G01 X107.96218 Y91.42116
G01 X107.96135 Y91.42043
G01 X107.94600 Y91.41156
G01 X107.94453 Y91.41118
G01 X107.94301 Y91.41118
G01 X107.94153 Y91.41156
G01 X107.94024 Y91.41232
G01 X107.93920 Y91.41337
G01 X107.93843 Y91.41466
G01 X107.93805 Y91.41613
G01 X107.93805 Y91.41766
G01 X107.93843 Y91.41913
G01 X107.94730 Y91.43447
G01 X107.94804 Y91.43531
G01 X108.11583 Y91.60310
G01 X108.12899 Y91.61464
G01 X108.14407 Y91.62345
G01 X108.49624 Y91.79957
G01 X108.49739 Y91.80006
G01 X108.49955 Y91.80049
G01 X108.52799 Y91.80722
G01 X108.53013 Y91.80778
G01 X108.53135 Y91.80785
G01 X109.45144 Y91.80785
G01 X109.45266 Y91.80778
G01 X109.45479 Y91.80722
G01 X109.48324 Y91.80049
G01 X109.48540 Y91.80006
G01 X109.48654 Y91.79957
G01 X109.83866 Y91.62347
G01 X109.85382 Y91.61464
G01 X109.86695 Y91.60310
G01 X110.03470 Y91.43536
G01 X110.04628 Y91.42215
G01 X110.05514 Y91.40702
G01 X110.23132 Y91.05462
G01 X110.23165 Y91.05385
G01 X110.23205 Y91.05185
G01 X110.23889 Y91.02292
G01 X110.23942 Y91.02094
G01 X110.23947 Y91.02002
G01 X110.23947 Y90.67100
G01 X110.23833 Y90.65352
G01 X110.23391 Y90.63663
G01 X110.05359 Y90.09569
G01 X110.05316 Y90.09462
G01 X110.05202 Y90.09292
G01 X110.03653 Y90.06785
G01 X110.03541 Y90.06592
G01 X110.03477 Y90.06518
G01 X108.61390 Y88.64433
G01 X108.55296 Y88.57006
G01 X108.50770 Y88.48536
G01 X108.47981 Y88.39343
G01 X108.47039 Y88.29783
G01 X108.47981 Y88.20225
G01 X108.50770 Y88.11032
G01 X108.55296 Y88.02562
G01 X108.61390 Y87.95135
G01 X108.68817 Y87.89041
G01 X108.77288 Y87.84515
G01 X108.86480 Y87.81726
G01 X108.96040 Y87.80784
G01 X110.21349 Y87.80784
G01 X110.21460 Y87.80776
G01 X110.23172 Y87.80319
G01 X110.23302 Y87.80243
G01 X110.23406 Y87.80138
G01 X110.23482 Y87.80006
G01 X110.23520 Y87.79859
G01 X110.23520 Y87.79709
G01 X110.23482 Y87.79562
G01 X110.23406 Y87.79432
G01 X110.23302 Y87.79328
G01 X110.23172 Y87.79252
G01 X110.21450 Y87.78792
G01 X110.21339 Y87.78785
G01 X107.76940 Y87.78785
G01 X107.76828 Y87.78792
G01 X107.75106 Y87.79252
G01 X107.74976 Y87.79328
G01 X107.74872 Y87.79432
G01 X107.74796 Y87.79564
G01 X107.74758 Y87.79707
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X104.14423 Y89.38319 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X104.14423 Y89.38319
G01 X104.14423 Y90.21248
G01 X104.15886 Y90.33135
G01 X104.32112 Y90.98030
G01 X104.35823 Y91.08057
G01 X104.48787 Y91.33986
G01 X104.52864 Y91.40722
G01 X104.57964 Y91.46721
G01 X104.65536 Y91.54293
G01 X104.71533 Y91.59393
G01 X104.78269 Y91.63470
G01 X104.98551 Y91.73612
G01 X105.09209 Y91.77476
G01 X105.20468 Y91.78786
G01 X105.34956 Y91.78786
G01 X105.46216 Y91.77476
G01 X105.56874 Y91.73610
G01 X105.77154 Y91.63468
G01 X105.83885 Y91.59396
G01 X105.89876 Y91.54298
G01 X105.97451 Y91.46726
G01 X106.02559 Y91.40727
G01 X106.06635 Y91.33986
G01 X106.19599 Y91.08057
G01 X106.23310 Y90.98027
G01 X106.39533 Y90.33133
G01 X106.40996 Y90.21248
G01 X106.40996 Y89.38319
G01 X106.39533 Y89.26437
G01 X106.23310 Y88.61543
G01 X106.19599 Y88.51512
G01 X106.06635 Y88.25584
G01 X106.02559 Y88.18843
G01 X105.97451 Y88.12843
G01 X105.89876 Y88.05272
G01 X105.83885 Y88.00174
G01 X105.77154 Y87.96102
G01 X105.56874 Y87.85960
G01 X105.46216 Y87.82094
G01 X105.34956 Y87.80784
G01 X105.20468 Y87.80784
G01 X105.09209 Y87.82094
G01 X104.98551 Y87.85958
G01 X104.78269 Y87.96100
G01 X104.71533 Y88.00176
G01 X104.65536 Y88.05277
G01 X104.57964 Y88.12849
G01 X104.52864 Y88.18848
G01 X104.48787 Y88.25584
G01 X104.35823 Y88.51512
G01 X104.32112 Y88.61540
G01 X104.15886 Y89.26435
G01 X104.14423 Y89.38319
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X104.12424 Y89.33773 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X104.12424 Y89.33773
G01 X104.12424 Y90.25797
G01 X104.12536 Y90.27512
G01 X104.12843 Y90.29206
G01 X104.31114 Y91.02284
G01 X104.31634 Y91.03907
G01 X104.32290 Y91.05464
G01 X104.49912 Y91.40709
G01 X104.50794 Y91.42215
G01 X104.51947 Y91.43531
G01 X104.68726 Y91.60310
G01 X104.70042 Y91.61464
G01 X104.71548 Y91.62345
G01 X105.06785 Y91.79965
G01 X105.06887 Y91.80006
G01 X105.07098 Y91.80049
G01 X105.09943 Y91.80722
G01 X105.10156 Y91.80778
G01 X105.10278 Y91.80785
G01 X105.45144 Y91.80785
G01 X105.45266 Y91.80778
G01 X105.45487 Y91.80719
G01 X105.48325 Y91.80049
G01 X105.48538 Y91.80006
G01 X105.48642 Y91.79962
G01 X105.83869 Y91.62345
G01 X105.85378 Y91.61464
G01 X105.86694 Y91.60310
G01 X106.03473 Y91.43531
G01 X106.04631 Y91.42210
G01 X106.05515 Y91.40702
G01 X106.23125 Y91.05479
G01 X106.23785 Y91.03907
G01 X106.24306 Y91.02284
G01 X106.42576 Y90.29206
G01 X106.42884 Y90.27512
G01 X106.42995 Y90.25797
G01 X106.42995 Y89.33773
G01 X106.42884 Y89.32058
G01 X106.42576 Y89.30369
G01 X106.24306 Y88.57286
G01 X106.23785 Y88.55663
G01 X106.23125 Y88.54090
G01 X106.05515 Y88.18868
G01 X106.04629 Y88.17357
G01 X106.03476 Y88.16041
G01 X105.86694 Y87.99260
G01 X105.85378 Y87.98106
G01 X105.83869 Y87.97225
G01 X105.48642 Y87.79608
G01 X105.48538 Y87.79564
G01 X105.48325 Y87.79521
G01 X105.45487 Y87.78851
G01 X105.45266 Y87.78792
G01 X105.45144 Y87.78785
G01 X105.10278 Y87.78785
G01 X105.10156 Y87.78792
G01 X105.09943 Y87.78848
G01 X105.07098 Y87.79521
G01 X105.06887 Y87.79564
G01 X105.06785 Y87.79605
G01 X104.71548 Y87.97225
G01 X104.70042 Y87.98106
G01 X104.68726 Y87.99260
G01 X104.51947 Y88.16039
G01 X104.50794 Y88.17354
G01 X104.49912 Y88.18861
G01 X104.32290 Y88.54106
G01 X104.31634 Y88.55663
G01 X104.31114 Y88.57286
G01 X104.12843 Y89.30369
G01 X104.12536 Y89.32058
G01 X104.12424 Y89.33773
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X100.12852 Y87.79712 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X100.12852 Y87.79712
G01 X100.12852 Y87.79859
G01 X100.12890 Y87.80001
G01 X100.13779 Y87.81543
G01 X100.13853 Y87.81627
G01 X102.32943 Y90.00720
G01 X102.39976 Y90.09605
G01 X102.44779 Y90.19869
G01 X102.57530 Y90.58116
G01 X102.59412 Y90.65764
G01 X102.60045 Y90.73613
G01 X102.60045 Y90.91789
G01 X102.58734 Y91.03046
G01 X102.54873 Y91.13701
G01 X102.44734 Y91.33983
G01 X102.40654 Y91.40724
G01 X102.35546 Y91.46726
G01 X102.27972 Y91.54298
G01 X102.21980 Y91.59396
G01 X102.15249 Y91.63468
G01 X101.94970 Y91.73610
G01 X101.84312 Y91.77476
G01 X101.73052 Y91.78786
G01 X101.01419 Y91.78786
G01 X100.90157 Y91.77476
G01 X100.79499 Y91.73610
G01 X100.59220 Y91.63468
G01 X100.52489 Y91.59393
G01 X100.46494 Y91.54296
G01 X100.34310 Y91.42114
G01 X100.34229 Y91.42043
G01 X100.32697 Y91.41159
G01 X100.32547 Y91.41118
G01 X100.32397 Y91.41118
G01 X100.32250 Y91.41156
G01 X100.32120 Y91.41232
G01 X100.32011 Y91.41342
G01 X100.31937 Y91.41471
G01 X100.31899 Y91.41613
G01 X100.31899 Y91.41766
G01 X100.31937 Y91.41908
G01 X100.32824 Y91.43445
G01 X100.32900 Y91.43531
G01 X100.49679 Y91.60310
G01 X100.50995 Y91.61464
G01 X100.52504 Y91.62345
G01 X100.87731 Y91.79962
G01 X100.87835 Y91.80006
G01 X100.88049 Y91.80049
G01 X100.90886 Y91.80719
G01 X100.91107 Y91.80778
G01 X100.91229 Y91.80785
G01 X101.83240 Y91.80785
G01 X101.83362 Y91.80778
G01 X101.83583 Y91.80719
G01 X101.86420 Y91.80049
G01 X101.86631 Y91.80006
G01 X101.86748 Y91.79957
G01 X102.21965 Y91.62345
G01 X102.23474 Y91.61464
G01 X102.24789 Y91.60310
G01 X102.41569 Y91.43531
G01 X102.42727 Y91.42210
G01 X102.43611 Y91.40702
G01 X102.61218 Y91.05482
G01 X102.61264 Y91.05378
G01 X102.61307 Y91.05159
G01 X102.61980 Y91.02315
G01 X102.62036 Y91.02101
G01 X102.62044 Y91.01979
G01 X102.62044 Y90.67108
G01 X102.61929 Y90.65352
G01 X102.61485 Y90.63656
G01 X102.54563 Y90.42896
G01 X102.43456 Y90.09566
G01 X102.43413 Y90.09462
G01 X102.43288 Y90.09274
G01 X102.41749 Y90.06785
G01 X102.41642 Y90.06600
G01 X102.41571 Y90.06518
G01 X100.99486 Y88.64431
G01 X100.93393 Y88.57006
G01 X100.88866 Y88.48536
G01 X100.86078 Y88.39343
G01 X100.85135 Y88.29783
G01 X100.86078 Y88.20225
G01 X100.88866 Y88.11032
G01 X100.93393 Y88.02562
G01 X100.99489 Y87.95135
G01 X101.06913 Y87.89041
G01 X101.15384 Y87.84515
G01 X101.24576 Y87.81726
G01 X101.34137 Y87.80784
G01 X102.59443 Y87.80784
G01 X102.59552 Y87.80776
G01 X102.61266 Y87.80319
G01 X102.61396 Y87.80243
G01 X102.61500 Y87.80138
G01 X102.61576 Y87.80006
G01 X102.61614 Y87.79859
G01 X102.61614 Y87.79709
G01 X102.61576 Y87.79562
G01 X102.61500 Y87.79432
G01 X102.61396 Y87.79328
G01 X102.61266 Y87.79252
G01 X102.59544 Y87.78792
G01 X102.59435 Y87.78785
G01 X100.15034 Y87.78785
G01 X100.14925 Y87.78792
G01 X100.13202 Y87.79252
G01 X100.13073 Y87.79328
G01 X100.12964 Y87.79437
G01 X100.12893 Y87.79564
G01 X100.12852 Y87.79712
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.40944 Y94.55433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.40944 Y94.55433
G01 X100.95493 Y97.29110
G01 X100.95493 Y103.24250
G01 X100.97160 Y103.36917
G01 X100.99153 Y103.44369
G01 X101.02074 Y103.52403
G01 X101.06349 Y103.59810
G01 X101.11848 Y103.66361
G01 X101.14691 Y103.69201
G01 X101.17304 Y103.71814
G01 X101.23845 Y103.77301
G01 X101.31239 Y103.81568
G01 X101.39260 Y103.84486
G01 X101.46710 Y103.86483
G01 X101.59395 Y103.88154
G01 X132.52332 Y103.88154
G01 X132.65015 Y103.86483
G01 X132.72464 Y103.84486
G01 X132.80491 Y103.81565
G01 X132.87887 Y103.77295
G01 X132.94430 Y103.71807
G01 X132.97034 Y103.69201
G01 X132.99884 Y103.66353
G01 X133.05373 Y103.59808
G01 X133.09645 Y103.52411
G01 X133.12566 Y103.44385
G01 X133.12937 Y103.42998
G01 X133.11949 Y103.39927
G01 X133.10742 Y103.35909
G01 X133.09170 Y103.30280
G01 X133.04044 Y103.16534
G01 X133.03242 Y103.14857
G01 X133.01453 Y103.10829
G01 X133.00366 Y103.08174
G01 X132.98502 Y103.03999
G01 X132.93640 Y102.93989
G01 X132.90938 Y102.87651
G01 X132.89660 Y102.84197
G01 X132.86442 Y102.72627
G01 X132.84923 Y102.65896
G01 X132.84905 Y102.65789
G01 X132.83498 Y102.50278
G01 X132.83272 Y102.46833
G01 X132.83498 Y102.43387
G01 X132.84905 Y102.27877
G01 X132.84923 Y102.27768
G01 X132.86442 Y102.21040
G01 X132.86853 Y102.19567
G01 X132.89660 Y102.09470
G01 X132.90938 Y102.06013
G01 X132.93640 Y101.99676
G01 X132.97326 Y101.92084
G01 X133.01027 Y101.85840
G01 X133.04819 Y101.80100
G01 X133.07704 Y101.76168
G01 X133.14801 Y101.68005
G01 X133.15307 Y101.67431
G01 X133.19404 Y101.62820
G01 X133.21451 Y101.60412
G01 X133.25992 Y101.54830
G01 X133.26155 Y101.54169
G01 X133.28179 Y101.40730
G01 X133.28362 Y101.37451
G01 X133.28469 Y101.33585
G01 X133.28469 Y96.79817
G01 X133.27859 Y96.70594
G01 X133.26846 Y96.62882
G01 X133.26406 Y96.59992
G01 X133.19546 Y96.50789
G01 X133.16975 Y96.47858
G01 X133.13843 Y96.44516
G01 X129.62211 Y92.92881
G01 X129.55256 Y92.86787
G01 X129.49084 Y92.82050
G01 X129.46735 Y92.80318
G01 X129.35394 Y92.78664
G01 X129.31502 Y92.78408
G01 X129.26908 Y92.78258
G01 X124.55895 Y92.78258
G01 X124.52451 Y92.78174
G01 X124.49022 Y92.78004
G01 X124.45621 Y92.77501
G01 X124.38874 Y92.76157
G01 X124.35542 Y92.75322
G01 X124.32309 Y92.74166
G01 X124.25948 Y92.71532
G01 X124.22842 Y92.70064
G01 X124.19898 Y92.68301
G01 X124.14170 Y92.64473
G01 X124.11415 Y92.62429
G01 X124.08867 Y92.60120
G01 X124.06378 Y92.57747
G01 X122.03178 Y90.54547
G01 X122.00805 Y90.52058
G01 X121.98496 Y90.49510
G01 X121.96452 Y90.46755
G01 X121.92624 Y90.41027
G01 X121.90861 Y90.38083
G01 X121.89393 Y90.34977
G01 X121.86759 Y90.28616
G01 X121.85603 Y90.25383
G01 X121.84768 Y90.22051
G01 X121.83424 Y90.15304
G01 X121.82921 Y90.11903
G01 X121.82751 Y90.08474
G01 X121.82667 Y90.05033
G01 X121.82667 Y88.38878
G01 X121.82060 Y88.29656
G01 X121.81044 Y88.21944
G01 X121.80335 Y88.17573
G01 X121.74328 Y88.10359
G01 X121.73625 Y88.09615
G01 X121.72086 Y88.07939
G01 X121.69507 Y88.05035
G01 X121.68999 Y88.04461
G01 X121.61903 Y87.96298
G01 X121.59017 Y87.92363
G01 X121.55222 Y87.86620
G01 X121.51527 Y87.80380
G01 X121.47839 Y87.72785
G01 X121.45139 Y87.66453
G01 X121.43861 Y87.62996
G01 X121.40643 Y87.51426
G01 X121.39124 Y87.44700
G01 X121.39106 Y87.44589
G01 X121.37699 Y87.29082
G01 X121.37486 Y87.25988
G01 X121.37308 Y87.22140
G01 X121.36830 Y87.16539
G01 X121.36254 Y87.11881
G01 X121.34532 Y87.09166
G01 X121.26810 Y86.99046
G01 X121.25009 Y86.97078
G01 X121.22850 Y86.94822
G01 X120.89444 Y86.61416
G01 X120.82500 Y86.55328
G01 X120.76328 Y86.50591
G01 X120.57996 Y86.40121
G01 X120.50287 Y86.36926
G01 X120.43356 Y86.35087
G01 X120.40651 Y86.34370
G01 X120.33523 Y86.36280
G01 X120.25779 Y86.39892
G01 X120.19099 Y86.43751
G01 X120.15368 Y86.46362
G01 X120.15368 Y86.46364
G01 X120.15271 Y86.46631
G01 X120.11918 Y86.56501
G01 X120.10356 Y86.61579
G01 X120.09236 Y86.65630
G01 X120.09071 Y86.66242
G01 X120.07003 Y86.73954
G01 X120.04623 Y86.88236
G01 X120.04367 Y86.92127
G01 X120.04217 Y86.96717
G01 X120.04217 Y87.85632
G01 X120.04133 Y87.89074
G01 X120.04108 Y87.89587
G01 X120.03699 Y87.93953
G01 X120.03473 Y87.96029
G01 X120.02271 Y88.00692
G01 X120.00884 Y88.05391
G01 X120.00077 Y88.07956
G01 X119.98228 Y88.11723
G01 X119.95939 Y88.16057
G01 X119.94440 Y88.18749
G01 X119.92096 Y88.21782
G01 X119.88992 Y88.25574
G01 X119.86747 Y88.28185
G01 X119.84126 Y88.30438
G01 X119.80333 Y88.33542
G01 X119.77308 Y88.35879
G01 X119.74631 Y88.37370
G01 X119.70295 Y88.39661
G01 X119.66516 Y88.41517
G01 X119.63950 Y88.42325
G01 X119.59251 Y88.43712
G01 X119.54590 Y88.44913
G01 X119.52513 Y88.45140
G01 X119.48149 Y88.45548
G01 X119.47633 Y88.45574
G01 X119.44192 Y88.45658
G01 X117.99193 Y88.45658
G01 X117.95752 Y88.45574
G01 X117.95236 Y88.45548
G01 X117.90872 Y88.45140
G01 X117.88794 Y88.44913
G01 X117.84134 Y88.43712
G01 X117.79435 Y88.42325
G01 X117.76869 Y88.41517
G01 X117.73090 Y88.39661
G01 X117.68754 Y88.37370
G01 X117.66077 Y88.35879
G01 X117.63052 Y88.33542
G01 X117.59259 Y88.30438
G01 X117.56638 Y88.28185
G01 X117.54393 Y88.25574
G01 X117.51289 Y88.21782
G01 X117.48944 Y88.18749
G01 X117.47446 Y88.16057
G01 X117.45157 Y88.11723
G01 X117.43308 Y88.07956
G01 X117.42500 Y88.05391
G01 X117.41114 Y88.00692
G01 X117.39912 Y87.96029
G01 X117.39686 Y87.93953
G01 X117.39277 Y87.89587
G01 X117.39252 Y87.89074
G01 X117.39168 Y87.85632
G01 X117.39168 Y86.65630
G01 X117.39252 Y86.62191
G01 X117.39277 Y86.61678
G01 X117.39686 Y86.57312
G01 X117.39912 Y86.55234
G01 X117.41114 Y86.50573
G01 X117.42500 Y86.45874
G01 X117.43308 Y86.43309
G01 X117.45157 Y86.39542
G01 X117.47446 Y86.35209
G01 X117.48944 Y86.32516
G01 X117.51289 Y86.29483
G01 X117.54393 Y86.25691
G01 X117.56636 Y86.23083
G01 X117.58500 Y86.21457
G01 X117.59254 Y86.20822
G01 X117.62897 Y86.17535
G01 X117.65340 Y86.15168
G01 X117.68086 Y86.12643
G01 X117.71223 Y86.09900
G01 X117.71870 Y86.09326
G01 X117.77913 Y86.03923
G01 X117.81888 Y86.00146
G01 X117.89089 Y85.92897
G01 X117.89653 Y85.92333
G01 X117.89882 Y85.90060
G01 X117.89231 Y85.88841
G01 X117.87260 Y85.84957
G01 X117.84659 Y85.79580
G01 X117.76399 Y85.65846
G01 X117.75437 Y85.64553
G01 X117.72340 Y85.60052
G01 X117.71352 Y85.58498
G01 X117.67593 Y85.53141
G01 X117.61393 Y85.45117
G01 X117.57451 Y85.39458
G01 X117.56780 Y85.38389
G01 X117.49656 Y85.24734
G01 X117.48132 Y85.21638
G01 X117.47017 Y85.18366
G01 X117.43181 Y85.06151
G01 X117.42401 Y85.03670
G01 X117.42119 Y85.02438
G01 X117.40908 Y84.95653
G01 X117.39546 Y84.85051
G01 X117.39252 Y84.79072
G01 X117.39252 Y84.72191
G01 X117.39546 Y84.66215
G01 X117.40908 Y84.55610
G01 X117.42119 Y84.48828
G01 X117.42401 Y84.47594
G01 X117.47017 Y84.32900
G01 X117.48132 Y84.29631
G01 X117.49653 Y84.26532
G01 X117.56780 Y84.12875
G01 X117.57451 Y84.11808
G01 X117.61393 Y84.06149
G01 X117.67928 Y83.97691
G01 X117.71949 Y83.93253
G01 X117.76818 Y83.88387
G01 X117.79325 Y83.86116
G01 X117.85871 Y83.79344
G01 X117.88454 Y83.76301
G01 X117.91030 Y83.73416
G01 X117.93628 Y83.70650
G01 X118.04733 Y83.56075
G01 X118.05721 Y83.54490
G01 X118.07052 Y83.52443
G01 X118.07052 Y83.52440
G01 X118.07240 Y83.52156
G01 X118.07240 Y83.49108
G01 X118.07052 Y83.48818
G01 X118.05721 Y83.46776
G01 X118.04738 Y83.45194
G01 X117.93631 Y83.30619
G01 X117.91025 Y83.27846
G01 X117.88449 Y83.24963
G01 X117.85868 Y83.21917
G01 X117.79328 Y83.15153
G01 X117.76813 Y83.12875
G01 X117.71949 Y83.08011
G01 X117.67931 Y83.03576
G01 X117.61393 Y82.95118
G01 X117.57451 Y82.89459
G01 X117.56780 Y82.88389
G01 X117.49653 Y82.74732
G01 X117.48132 Y82.71635
G01 X117.47017 Y82.68366
G01 X117.42404 Y82.53678
G01 X117.42119 Y82.52441
G01 X117.40908 Y82.45654
G01 X117.39546 Y82.35047
G01 X117.39252 Y82.29073
G01 X117.39252 Y82.22192
G01 X117.39546 Y82.16215
G01 X117.40908 Y82.05611
G01 X117.42119 Y81.98824
G01 X117.42401 Y81.97594
G01 X117.47017 Y81.82898
G01 X117.48132 Y81.79632
G01 X117.49653 Y81.76533
G01 X117.56783 Y81.62875
G01 X117.57451 Y81.61808
G01 X117.59615 Y81.58555
G01 X117.61393 Y81.56147
G01 X117.67931 Y81.47689
G01 X117.71949 Y81.43254
G01 X117.76813 Y81.38390
G01 X117.81246 Y81.34371
G01 X117.89709 Y81.27833
G01 X117.95368 Y81.23891
G01 X117.96435 Y81.23221
G01 X118.10092 Y81.16093
G01 X118.13191 Y81.14572
G01 X118.16460 Y81.13457
G01 X118.31154 Y81.08842
G01 X118.32388 Y81.08560
G01 X118.39170 Y81.07348
G01 X118.49775 Y81.05987
G01 X118.55751 Y81.05692
G01 X118.59193 Y81.05608
G01 X118.84194 Y81.05608
G01 X118.87633 Y81.05692
G01 X118.93610 Y81.05987
G01 X119.04215 Y81.07348
G01 X119.10996 Y81.08560
G01 X119.12231 Y81.08842
G01 X119.26925 Y81.13457
G01 X119.30194 Y81.14572
G01 X119.33293 Y81.16093
G01 X119.45934 Y81.22692
G01 X119.48083 Y81.23767
G01 X119.54405 Y81.26797
G01 X119.54494 Y81.26840
G01 X119.61560 Y81.30239
G01 X119.70308 Y81.33835
G01 X119.76848 Y81.36104
G01 X119.80034 Y81.33599
G01 X119.82175 Y81.31859
G01 X119.85744 Y81.28872
G01 X119.88578 Y81.26604
G01 X119.91939 Y81.24031
G01 X119.97275 Y81.19535
G01 X119.99056 Y81.17884
G01 X119.99833 Y81.17173
G01 X120.01367 Y81.15791
G01 X120.04026 Y81.13266
G01 X123.42878 Y77.74418
G01 X123.45367 Y77.72045
G01 X123.47917 Y77.69737
G01 X123.50670 Y77.67692
G01 X123.56398 Y77.63864
G01 X123.59339 Y77.62101
G01 X123.62448 Y77.60633
G01 X123.63960 Y77.59940
G01 X123.68809 Y77.57999
G01 X123.72042 Y77.56841
G01 X123.75374 Y77.56008
G01 X123.82121 Y77.54664
G01 X123.85522 Y77.54161
G01 X123.88951 Y77.53991
G01 X123.92392 Y77.53907
G01 X127.49110 Y77.53907
G01 X127.58333 Y77.53300
G01 X127.66044 Y77.52284
G01 X127.68935 Y77.51847
G01 X127.78122 Y77.44997
G01 X127.81053 Y77.42429
G01 X127.84411 Y77.39284
G01 X128.09646 Y77.14050
G01 X128.15739 Y77.07095
G01 X128.20476 Y77.00923
G01 X128.22206 Y76.98576
G01 X128.23862 Y76.87232
G01 X128.24116 Y76.83341
G01 X128.24269 Y76.78749
G01 X128.24269 Y75.16900
G01 X128.23659 Y75.07677
G01 X128.22646 Y74.99966
G01 X128.17088 Y74.79610
G01 X128.13895 Y74.71896
G01 X128.10294 Y74.64863
G01 X128.09933 Y74.64159
G01 X128.07858 Y74.62506
G01 X127.97967 Y74.57743
G01 X127.92737 Y74.55914
G01 X127.83867 Y74.53717
G01 X127.81876 Y74.53418
G01 X127.71861 Y74.51906
G01 X127.53098 Y74.46118
G01 X127.35412 Y74.37601
G01 X127.17571 Y74.25437
G01 X127.08960 Y74.19331
G01 X127.02140 Y74.15727
G01 X126.94269 Y74.12407
G01 X126.85940 Y74.10507
G01 X126.77406 Y74.10083
G01 X126.75572 Y74.10151
G01 X126.75463 Y74.10245
G01 X126.69877 Y74.15120
G01 X126.56525 Y74.25813
G01 X126.53553 Y74.28074
G01 X126.49987 Y74.30647
G01 X126.44505 Y74.34228
G01 X126.41521 Y74.35889
G01 X126.32905 Y74.38536
G01 X126.31158 Y74.38742
G01 X126.27094 Y74.38858
G01 X124.67094 Y74.38858
G01 X124.63025 Y74.38742
G01 X124.61282 Y74.38538
G01 X124.52664 Y74.35889
G01 X124.45412 Y74.31505
G01 X124.39421 Y74.25511
G01 X124.35037 Y74.18262
G01 X124.32387 Y74.09646
G01 X124.32187 Y74.07901
G01 X124.32067 Y74.03832
G01 X124.32067 Y72.43832
G01 X124.32184 Y72.39768
G01 X124.32390 Y72.38018
G01 X124.35037 Y72.29402
G01 X124.36540 Y72.26685
G01 X124.39421 Y72.22153
G01 X124.45412 Y72.16161
G01 X124.52667 Y72.11775
G01 X124.61275 Y72.09131
G01 X124.63022 Y72.08927
G01 X124.67094 Y72.08808
G01 X126.27094 Y72.08808
G01 X126.31163 Y72.08927
G01 X126.32910 Y72.09131
G01 X126.41518 Y72.11777
G01 X126.49984 Y72.17015
G01 X126.57840 Y72.22684
G01 X126.64355 Y72.27911
G01 X126.75541 Y72.37810
G01 X126.78922 Y72.37876
G01 X126.87365 Y72.36563
G01 X126.94853 Y72.34716
G01 X127.03710 Y72.31605
G01 X127.11813 Y72.26860
G01 X127.14759 Y72.24731
G01 X127.17091 Y72.22821
G01 X127.17091 Y72.26390
G01 X127.13441 Y72.29385
G01 X127.06649 Y72.36177
G01 X126.96700 Y72.48300
G01 X126.91363 Y72.56288
G01 X126.83969 Y72.70119
G01 X126.80294 Y72.78993
G01 X126.76090 Y72.92846
G01 X126.75912 Y72.94056
G01 X126.74975 Y73.03532
G01 X126.74205 Y73.19217
G01 X126.74205 Y73.28450
G01 X126.74975 Y73.44132
G01 X126.75912 Y73.53606
G01 X126.76090 Y73.54815
G01 X126.76093 Y74.03832
G01 X126.75463 Y74.10248
G01 X126.69877 Y74.15120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.76090 Y73.54815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.76090 Y73.54815
G01 X126.80294 Y73.68671
G01 X126.83969 Y73.77545
G01 X126.91363 Y73.91376
G01 X126.96700 Y73.99361
G01 X127.06649 Y74.11485
G01 X127.07355 Y74.12193
G01 X127.13441 Y74.18277
G01 X127.25562 Y74.28226
G01 X127.33550 Y74.33562
G01 X127.47380 Y74.40956
G01 X127.56255 Y74.44632
G01 X127.71261 Y74.49183
G01 X127.80685 Y74.51058
G01 X127.96291 Y74.52595
G01 X128.05897 Y74.52595
G01 X128.10294 Y74.52163
G01 X128.20502 Y74.40901
G01 X128.26285 Y74.33880
G01 X128.29918 Y74.28980
G01 X128.32016 Y74.26293
G01 X128.37248 Y74.19915
G01 X128.38122 Y74.18879
G01 X128.40413 Y74.16224
G01 X128.41129 Y74.15374
G01 X128.45140 Y74.10489
G01 X128.47510 Y74.07868
G01 X128.52326 Y74.03052
G01 X128.52577 Y74.02798
G01 X128.54302 Y74.01030
G01 X128.59412 Y73.95920
G01 X128.60342 Y73.95033
G01 X128.65691 Y73.90187
G01 X128.67446 Y73.88432
G01 X128.77990 Y73.76796
G01 X128.79684 Y73.74734
G01 X128.89128 Y73.61998
G01 X128.90941 Y73.59280
G01 X128.99255 Y73.45412
G01 X129.01299 Y73.41579
G01 X129.08419 Y73.26524
G01 X129.10738 Y73.20913
G01 X129.16582 Y73.04579
G01 X129.19102 Y72.96230
G01 X129.22729 Y72.81749
G01 X129.21894 Y72.78993
G01 X129.18218 Y72.70119
G01 X129.10824 Y72.56288
G01 X129.07530 Y72.51356
G01 X129.05488 Y72.48300
G01 X128.95539 Y72.36177
G01 X128.88747 Y72.29385
G01 X128.85094 Y72.26387
G01 X128.85094 Y72.23070
G01 X128.97390 Y72.34480
G01 X129.02557 Y72.40959
G01 X129.11769 Y72.49834
G01 X129.17977 Y72.54416
G01 X129.25264 Y72.58869
G01 X129.33217 Y72.61991
G01 X129.40890 Y72.63542
G01 X129.41627 Y72.63342
G01 X129.49707 Y72.60515
G01 X129.69859 Y72.50484
G01 X129.76344 Y72.46062
G01 X129.85175 Y72.38963
G01 X129.86389 Y72.37815
G01 X129.87822 Y72.36423
G01 X135.52344 Y66.71900
G01 X135.58440 Y66.64946
G01 X135.63175 Y66.58774
G01 X135.64905 Y66.56424
G01 X135.66561 Y66.45083
G01 X135.66817 Y66.41192
G01 X135.66967 Y66.36597
G01 X135.66967 Y60.88251
G01 X135.68720 Y60.81251
G01 X135.69995 Y60.74856
G01 X135.73630 Y60.50350
G01 X135.74173 Y60.44845
G01 X135.75377 Y60.20342
G01 X135.75443 Y60.17731
G01 X135.75443 Y57.25631
G01 X135.75377 Y57.23022
G01 X135.74173 Y56.98519
G01 X135.73630 Y56.93017
G01 X135.69995 Y56.68511
G01 X135.68720 Y56.62116
G01 X135.66967 Y56.55115
G01 X135.66967 Y55.60285
G01 X135.66360 Y55.51062
G01 X135.65344 Y55.43348
G01 X135.59789 Y55.22987
G01 X135.58793 Y55.20587
G01 X135.53261 Y55.18608
G01 X135.52035 Y55.18179
G01 X135.44412 Y55.15575
G01 X135.36690 Y55.13391
G01 X135.31473 Y55.12218
G01 X135.29032 Y55.11712
G01 X135.25260 Y55.11001
G01 X135.22273 Y55.10371
G01 X135.19837 Y55.09802
G01 X135.07287 Y55.05746
G01 X135.01821 Y55.03724
G01 X135.00866 Y55.03221
G01 X134.87056 Y54.95794
G01 X134.85075 Y54.94686
G01 X134.81357 Y54.91910
G01 X134.70122 Y54.82929
G01 X134.69175 Y54.82035
G01 X134.64399 Y54.77061
G01 X134.57303 Y54.68898
G01 X134.54417 Y54.64963
G01 X134.50623 Y54.59220
G01 X134.46927 Y54.52980
G01 X134.43239 Y54.45385
G01 X134.40539 Y54.39053
G01 X134.39261 Y54.35596
G01 X134.36043 Y54.24026
G01 X134.34524 Y54.17300
G01 X134.34504 Y54.17186
G01 X134.33096 Y54.01682
G01 X134.32870 Y53.98233
G01 X134.33099 Y53.94781
G01 X134.34506 Y53.79277
G01 X134.34524 Y53.79162
G01 X134.36043 Y53.72439
G01 X134.36703 Y53.70069
G01 X134.39261 Y53.60872
G01 X134.40539 Y53.57412
G01 X134.43239 Y53.51080
G01 X134.46927 Y53.43485
G01 X134.50623 Y53.37245
G01 X134.54417 Y53.31502
G01 X134.57303 Y53.27567
G01 X134.64399 Y53.19404
G01 X134.69175 Y53.14430
G01 X134.70122 Y53.13536
G01 X134.81357 Y53.04555
G01 X134.85075 Y53.01779
G01 X134.87056 Y53.00671
G01 X135.00866 Y52.93244
G01 X135.01821 Y52.92741
G01 X135.07287 Y52.90719
G01 X135.19837 Y52.86663
G01 X135.22273 Y52.86094
G01 X135.23866 Y52.85741
G01 X135.29042 Y52.84857
G01 X135.38593 Y52.83590
G01 X135.44648 Y52.83292
G01 X135.51539 Y52.83292
G01 X135.57595 Y52.83590
G01 X135.67142 Y52.84857
G01 X135.73912 Y52.86094
G01 X135.76345 Y52.86663
G01 X135.88898 Y52.90719
G01 X135.94364 Y52.92741
G01 X135.95319 Y52.93244
G01 X136.09129 Y53.00671
G01 X136.11110 Y53.01779
G01 X136.14828 Y53.04555
G01 X136.26063 Y53.13536
G01 X136.27010 Y53.14430
G01 X136.31785 Y53.19404
G01 X136.38882 Y53.27567
G01 X136.41768 Y53.31502
G01 X136.45562 Y53.37245
G01 X136.49258 Y53.43485
G01 X136.52946 Y53.51080
G01 X136.55646 Y53.57412
G01 X136.56924 Y53.60869
G01 X136.60142 Y53.72439
G01 X136.61661 Y53.79162
G01 X136.61679 Y53.79277
G01 X136.63086 Y53.94781
G01 X136.63299 Y53.97879
G01 X136.63477 Y54.01720
G01 X136.63955 Y54.07333
G01 X136.64531 Y54.11984
G01 X136.66253 Y54.14702
G01 X136.73957 Y54.24798
G01 X136.75755 Y54.26767
G01 X136.77935 Y54.29045
G01 X136.86507 Y54.37618
G01 X136.88880 Y54.40107
G01 X136.91188 Y54.42657
G01 X136.93233 Y54.45410
G01 X136.97061 Y54.51138
G01 X136.98824 Y54.54082
G01 X137.00292 Y54.57188
G01 X137.02926 Y54.63549
G01 X137.04081 Y54.66782
G01 X137.04917 Y54.70115
G01 X137.06261 Y54.76858
G01 X137.06764 Y54.80262
G01 X137.06934 Y54.83686
G01 X137.07018 Y54.87133
G01 X137.07018 Y66.86282
G01 X137.06934 Y66.89726
G01 X137.06764 Y66.93152
G01 X137.06258 Y66.96556
G01 X137.04917 Y67.03302
G01 X137.04084 Y67.06635
G01 X137.02926 Y67.09868
G01 X137.00292 Y67.16228
G01 X136.98824 Y67.19332
G01 X136.97058 Y67.22279
G01 X136.93231 Y67.28006
G01 X136.91191 Y67.30760
G01 X136.88877 Y67.33310
G01 X136.86507 Y67.35799
G01 X136.78814 Y67.43490
G01 X136.67775 Y67.54532
G01 X134.39426 Y69.82880
G01 X134.33338 Y69.89824
G01 X134.28601 Y69.95999
G01 X134.18131 Y70.14325
G01 X134.14935 Y70.22037
G01 X134.12881 Y70.29187
G01 X134.12279 Y70.31293
G01 X134.14290 Y70.38801
G01 X134.17902 Y70.46545
G01 X134.21760 Y70.53225
G01 X134.22281 Y70.53970
G01 X134.22665 Y70.54132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X134.14935 Y70.22037 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X134.14935 Y70.22037
G01 X134.12883 Y70.29187
G01 X134.12881 Y70.29187
G01 X133.87938 Y70.54132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.98322 Y73.78096 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.98322 Y73.78096
G01 X131.62835 Y74.13583
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X133.02195 Y75.32224 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X133.02195 Y75.32224
G01 X133.02657 Y75.36928
G01 X133.02657 Y75.46534
G01 X133.02195 Y75.51241
G01 X133.04385 Y75.53430
G01 X133.05261 Y75.41731
G01 X133.04385 Y75.30034
G01 X133.02195 Y75.32224
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X135.78545 Y79.32982 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X135.78545 Y79.32982
G01 X135.78567 Y79.33112
G01 X135.79449 Y79.34189
G01 X135.86241 Y79.40978
G01 X135.88859 Y79.43132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X135.72507 Y79.43132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X135.72507 Y79.43132
G01 X135.88859 Y79.43132
G01 X136.01151 Y79.47529
G01 X136.09634 Y79.50110
G01 X136.25316 Y79.54041
G01 X136.32644 Y79.55502
G01 X136.48326 Y79.57826
G01 X136.54986 Y79.58486
G01 X136.70670 Y79.59254
G01 X136.77114 Y79.59254
G01 X136.92799 Y79.58486
G01 X136.99459 Y79.57826
G01 X137.15141 Y79.55502
G01 X137.22469 Y79.54041
G01 X137.38151 Y79.50110
G01 X137.46634 Y79.47529
G01 X137.58923 Y79.43132
G01 X138.75402 Y79.43132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.86626 Y79.45014 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.86626 Y79.45014
G01 X140.94195 Y79.49312
G01 X140.94393 Y79.49426
G01 X140.98190 Y79.51595
G01 X141.04751 Y79.54979
G01 X141.11104 Y79.57905
G01 X141.16242 Y79.60310
G01 X141.17827 Y79.61032
G01 X141.22356 Y79.63023
G01 X141.24137 Y79.63833
G01 X141.27240 Y79.65301
G01 X141.30187 Y79.67067
G01 X141.35914 Y79.70894
G01 X141.38670 Y79.72939
G01 X141.41218 Y79.75248
G01 X141.43707 Y79.77620
G01 X141.51012 Y79.84923
G01 X143.08807 Y81.42718
G01 X143.11180 Y81.45207
G01 X143.13488 Y81.47755
G01 X143.15533 Y81.50511
G01 X143.19361 Y81.56238
G01 X143.21124 Y81.59182
G01 X143.22592 Y81.62288
G01 X143.25226 Y81.68649
G01 X143.26381 Y81.71877
G01 X143.26986 Y81.74282
G01 X143.27217 Y81.75215
G01 X143.28561 Y81.81958
G01 X143.29064 Y81.85362
G01 X143.29234 Y81.88786
G01 X143.29318 Y81.92230
G01 X143.29318 Y85.37647
G01 X143.29925 Y85.46872
G01 X143.30941 Y85.54584
G01 X143.31380 Y85.57477
G01 X143.38225 Y85.66664
G01 X143.40796 Y85.69595
G01 X143.43940 Y85.72951
G01 X145.92114 Y88.21124
G01 X145.99063 Y88.27215
G01 X146.05233 Y88.31949
G01 X146.15693 Y88.38693
G01 X146.21695 Y88.37954
G01 X146.23559 Y88.37700
G01 X146.31270 Y88.36557
G01 X146.41651 Y88.34225
G01 X146.42584 Y88.33941
G01 X146.43429 Y88.33679
G01 X146.52487 Y88.31408
G01 X146.59238 Y88.30065
G01 X146.68453 Y88.28698
G01 X146.90442 Y88.26897
G01 X146.93892 Y88.26699
G01 X146.97343 Y88.26897
G01 X147.19332 Y88.28698
G01 X147.28547 Y88.30065
G01 X147.35299 Y88.31408
G01 X147.44336 Y88.33674
G01 X147.65342 Y88.40423
G01 X147.68606 Y88.41561
G01 X147.71717 Y88.43064
G01 X147.91341 Y88.53143
G01 X147.99335 Y88.57934
G01 X148.05055 Y88.61756
G01 X148.12540 Y88.67309
G01 X148.29365 Y88.81581
G01 X148.31943 Y88.83882
G01 X148.34244 Y88.86460
G01 X148.48519 Y89.03285
G01 X148.54066 Y89.10766
G01 X148.57892 Y89.16491
G01 X148.62682 Y89.24482
G01 X148.72763 Y89.44108
G01 X148.74265 Y89.47220
G01 X148.75402 Y89.50483
G01 X148.75819 Y89.51781
G01 X148.82151 Y89.71489
G01 X148.84417 Y89.80527
G01 X148.85761 Y89.87278
G01 X148.87127 Y89.96493
G01 X148.88928 Y90.18482
G01 X148.89126 Y90.21931
G01 X148.88928 Y90.25383
G01 X148.87127 Y90.47372
G01 X148.85761 Y90.56587
G01 X148.84417 Y90.63338
G01 X148.82151 Y90.72376
G01 X148.75402 Y90.93381
G01 X148.74265 Y90.96645
G01 X148.72761 Y90.99757
G01 X148.62680 Y91.19386
G01 X148.57892 Y91.27374
G01 X148.54066 Y91.33099
G01 X148.48519 Y91.40580
G01 X148.34244 Y91.57405
G01 X148.31943 Y91.59983
G01 X148.29365 Y91.62284
G01 X148.12540 Y91.76556
G01 X148.05055 Y91.82109
G01 X147.99335 Y91.85931
G01 X147.91341 Y91.90722
G01 X147.73919 Y91.99670
G01 X147.71717 Y92.00800
G01 X147.68606 Y92.02304
G01 X147.65342 Y92.03442
G01 X147.44333 Y92.10193
G01 X147.35299 Y92.12457
G01 X147.28547 Y92.13800
G01 X147.19332 Y92.15167
G01 X146.97343 Y92.16968
G01 X146.93892 Y92.17166
G01 X146.90442 Y92.16968
G01 X146.68453 Y92.15167
G01 X146.59238 Y92.13800
G01 X146.52487 Y92.12457
G01 X146.43450 Y92.10191
G01 X146.22444 Y92.03442
G01 X146.19180 Y92.02304
G01 X146.16068 Y92.00803
G01 X145.96442 Y91.90722
G01 X145.88451 Y91.85931
G01 X145.82726 Y91.82106
G01 X145.75246 Y91.76559
G01 X145.58421 Y91.62284
G01 X145.55843 Y91.59983
G01 X145.53541 Y91.57405
G01 X145.39266 Y91.40580
G01 X145.33719 Y91.33099
G01 X145.29894 Y91.27374
G01 X145.25103 Y91.19383
G01 X145.15022 Y90.99757
G01 X145.13521 Y90.96645
G01 X145.12383 Y90.93381
G01 X145.05632 Y90.72370
G01 X145.03369 Y90.63338
G01 X145.02025 Y90.56587
G01 X145.00659 Y90.47372
G01 X144.98858 Y90.25383
G01 X144.98660 Y90.21931
G01 X144.98858 Y90.18482
G01 X145.00659 Y89.96493
G01 X145.02025 Y89.87278
G01 X145.03369 Y89.80527
G01 X145.05632 Y89.71489
G01 X145.07842 Y89.62607
G01 X145.09234 Y89.54969
G01 X145.09993 Y89.49757
G01 X145.10661 Y89.43735
G01 X145.05822 Y89.36069
G01 X145.01268 Y89.29714
G01 X144.94529 Y89.21637
G01 X144.93851 Y89.20936
G01 X144.93082 Y89.20153
G01 X142.19125 Y86.46194
G01 X142.12170 Y86.40101
G01 X142.08978 Y86.37649
G01 X142.06163 Y86.35379
G01 X142.06046 Y86.35280
G01 X142.00601 Y86.31068
G01 X141.93760 Y86.26250
G01 X141.87680 Y86.22298
G01 X141.87169 Y86.21993
G01 X141.81431 Y86.18241
G01 X141.81429 Y86.18239
G01 X141.81223 Y86.18104
G01 X141.79966 Y86.18104
G01 X141.71454 Y86.18848
G01 X141.63204 Y86.21061
G01 X141.55462 Y86.24670
G01 X141.48785 Y86.28526
G01 X141.41792 Y86.33423
G01 X141.35754 Y86.39460
G01 X141.32318 Y86.44360
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X141.81429 Y86.18239 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X141.81429 Y86.18239
G01 X141.80067 Y86.14952
G01 X141.78076 Y86.08386
G01 X141.76201 Y85.98965
G01 X141.75531 Y85.92135
G01 X141.75295 Y85.87332
G01 X141.75295 Y82.27025
G01 X141.49953 Y82.01686
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X144.98868 Y80.99931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X144.98868 Y80.99931
G01 X144.98868 Y84.19933
G01 X144.98985 Y84.23997
G01 X144.99190 Y84.25747
G01 X145.01299 Y84.32887
G01 X145.01837 Y84.34361
G01 X145.06221 Y84.41612
G01 X145.12213 Y84.47604
G01 X145.19465 Y84.51988
G01 X145.28080 Y84.54637
G01 X145.29825 Y84.54838
G01 X145.33894 Y84.54957
G01 X148.53894 Y84.54957
G01 X148.57958 Y84.54841
G01 X148.59708 Y84.54635
G01 X148.68316 Y84.51991
G01 X148.70206 Y84.50959
G01 X148.75573 Y84.47604
G01 X148.81565 Y84.41610
G01 X148.85949 Y84.34361
G01 X148.88595 Y84.25747
G01 X148.88801 Y84.23997
G01 X148.88918 Y84.19933
G01 X148.88918 Y80.99931
G01 X148.88801 Y80.95867
G01 X148.88595 Y80.94117
G01 X148.85949 Y80.85504
G01 X148.81565 Y80.78255
G01 X148.75570 Y80.72261
G01 X148.68321 Y80.67877
G01 X148.59708 Y80.65230
G01 X148.57958 Y80.65024
G01 X148.53894 Y80.64907
G01 X145.33894 Y80.64907
G01 X145.29828 Y80.65024
G01 X145.28078 Y80.65230
G01 X145.19465 Y80.67877
G01 X145.12213 Y80.72261
G01 X145.06216 Y80.78258
G01 X145.01840 Y80.85499
G01 X144.99190 Y80.94117
G01 X144.98985 Y80.95867
G01 X144.98868 Y80.99931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X148.83472 Y78.71931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X148.83472 Y78.71931
G01 X148.83698 Y78.68487
G01 X148.85105 Y78.52975
G01 X148.85123 Y78.52868
G01 X148.85756 Y78.49686
G01 X148.86642 Y78.46140
G01 X148.89860 Y78.34570
G01 X148.91138 Y78.31113
G01 X148.93840 Y78.24778
G01 X148.97526 Y78.17184
G01 X149.01227 Y78.10940
G01 X149.05019 Y78.05200
G01 X149.07904 Y78.01271
G01 X149.15001 Y77.93105
G01 X149.19774 Y77.88134
G01 X149.20320 Y77.87616
G01 X149.20729 Y77.87230
G01 X149.31958 Y77.78256
G01 X149.35674 Y77.75479
G01 X149.37658 Y77.74375
G01 X149.51468 Y77.66945
G01 X149.52418 Y77.66442
G01 X149.57881 Y77.64423
G01 X149.70442 Y77.60364
G01 X149.72865 Y77.59795
G01 X149.74252 Y77.59485
G01 X149.79647 Y77.58555
G01 X149.89194 Y77.57288
G01 X149.95252 Y77.56991
G01 X150.02133 Y77.56991
G01 X150.08191 Y77.57288
G01 X150.17736 Y77.58555
G01 X150.24516 Y77.59795
G01 X150.26944 Y77.60364
G01 X150.39502 Y77.64423
G01 X150.44965 Y77.66442
G01 X150.45918 Y77.66945
G01 X150.59728 Y77.74375
G01 X150.61709 Y77.75479
G01 X150.65427 Y77.78256
G01 X150.76662 Y77.87237
G01 X150.77612 Y77.88134
G01 X150.82385 Y77.93105
G01 X150.89481 Y78.01271
G01 X150.92367 Y78.05200
G01 X150.96161 Y78.10946
G01 X150.99857 Y78.17184
G01 X151.03545 Y78.24781
G01 X151.06245 Y78.31108
G01 X151.07523 Y78.34570
G01 X151.10741 Y78.46135
G01 X151.12263 Y78.52868
G01 X151.12280 Y78.52977
G01 X151.13688 Y78.68487
G01 X151.13870 Y78.70994
G01 X151.13914 Y78.71931
G01 X151.13688 Y78.75378
G01 X151.12283 Y78.90887
G01 X151.12263 Y78.90999
G01 X151.10741 Y78.97732
G01 X151.07523 Y79.09294
G01 X151.06245 Y79.12756
G01 X151.03545 Y79.19083
G01 X150.99857 Y79.26683
G01 X150.96161 Y79.32921
G01 X150.92367 Y79.38667
G01 X150.89481 Y79.42599
G01 X150.82385 Y79.50760
G01 X150.77612 Y79.55736
G01 X150.76662 Y79.56632
G01 X150.65427 Y79.65614
G01 X150.61706 Y79.68390
G01 X150.59733 Y79.69495
G01 X150.45920 Y79.76919
G01 X150.44965 Y79.77427
G01 X150.39497 Y79.79447
G01 X150.26944 Y79.83503
G01 X150.24511 Y79.84072
G01 X150.17736 Y79.85311
G01 X150.08194 Y79.86579
G01 X150.02133 Y79.86874
G01 X149.95252 Y79.86874
G01 X149.89192 Y79.86579
G01 X149.79647 Y79.85311
G01 X149.72870 Y79.84072
G01 X149.70439 Y79.83503
G01 X149.57886 Y79.79447
G01 X149.52418 Y79.77427
G01 X149.51463 Y79.76919
G01 X149.37653 Y79.69495
G01 X149.35677 Y79.68390
G01 X149.31958 Y79.65614
G01 X149.20724 Y79.56632
G01 X149.19774 Y79.55736
G01 X149.15001 Y79.50760
G01 X149.07904 Y79.42599
G01 X149.05019 Y79.38667
G01 X149.01227 Y79.32924
G01 X148.97526 Y79.26683
G01 X148.93840 Y79.19091
G01 X148.91138 Y79.12751
G01 X148.89860 Y79.09294
G01 X148.86642 Y78.97730
G01 X148.85123 Y78.90999
G01 X148.85105 Y78.90889
G01 X148.83698 Y78.75378
G01 X148.83472 Y78.71931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X153.24154 Y79.94034 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X153.24154 Y79.94034
G01 X153.26969 Y79.94034
G01 X153.38815 Y80.08471
G01 X153.45607 Y80.15261
G01 X153.60040 Y80.27107
G01 X153.64792 Y80.30282
G01 X153.64792 Y80.33152
G01 X153.62615 Y80.31895
G01 X153.47406 Y80.20224
G01 X153.33850 Y80.06668
G01 X153.24154 Y79.94034
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.32793 Y80.30282 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.32793 Y80.30282
G01 X155.32793 Y80.33152
G01 X155.34967 Y80.31895
G01 X155.50179 Y80.20224
G01 X155.59031 Y80.11377
G01 X155.63125 Y80.07717
G01 X155.65734 Y80.05639
G01 X155.73387 Y80.00628
G01 X155.81837 Y79.97125
G01 X155.89206 Y79.94852
G01 X155.93003 Y79.94034
G01 X155.70618 Y79.94034
G01 X155.58774 Y80.08471
G01 X155.51980 Y80.15261
G01 X155.37547 Y80.27107
G01 X155.32793 Y80.30282
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.15134 Y79.94034 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.15134 Y79.94034
G01 X156.22063 Y79.95616
G01 X156.30202 Y79.98232
G01 X156.37758 Y80.02225
G01 X156.44507 Y80.07473
G01 X156.50161 Y80.12721
G01 X156.58319 Y80.22571
G01 X156.60806 Y80.26531
G01 X156.74883 Y80.44181
G01 X156.90844 Y80.60142
G01 X157.08497 Y80.74219
G01 X157.27611 Y80.86228
G01 X157.47953 Y80.96025
G01 X157.69261 Y81.03482
G01 X157.90991 Y81.08443
G01 X157.90991 Y81.05918
G01 X157.90928 Y81.05913
G01 X157.81507 Y81.04039
G01 X157.53366 Y80.95504
G01 X157.44494 Y80.91826
G01 X157.18561 Y80.77966
G01 X157.10572 Y80.72629
G01 X156.87842 Y80.53975
G01 X156.81050 Y80.47183
G01 X156.62396 Y80.24453
G01 X156.57060 Y80.16465
G01 X156.45068 Y79.94034
G01 X156.15134 Y79.94034
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.17019 Y78.26033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.17019 Y78.26033
G01 X156.24829 Y78.23940
G01 X156.32574 Y78.20331
G01 X156.39254 Y78.16470
G01 X156.46712 Y78.11177
G01 X156.53056 Y78.04588
G01 X156.55137 Y78.01979
G01 X156.58319 Y77.97494
G01 X156.60806 Y77.93539
G01 X156.74880 Y77.75891
G01 X156.90847 Y77.59922
G01 X157.08497 Y77.45848
G01 X157.27611 Y77.33836
G01 X157.47953 Y77.24039
G01 X157.69259 Y77.16585
G01 X157.90991 Y77.11624
G01 X157.90991 Y77.14144
G01 X157.90928 Y77.14149
G01 X157.81507 Y77.16023
G01 X157.53366 Y77.24560
G01 X157.44494 Y77.28235
G01 X157.18561 Y77.42096
G01 X157.10572 Y77.47433
G01 X156.87842 Y77.66087
G01 X156.81050 Y77.72881
G01 X156.62396 Y77.95614
G01 X156.57060 Y78.03597
G01 X156.45066 Y78.26033
G01 X156.17019 Y78.26033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.38495 Y77.72327 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.38495 Y77.72327
G01 X155.37547 Y77.73107
G01 X155.29559 Y77.78444
G01 X155.20974 Y77.83033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X153.76608 Y77.83033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X153.76608 Y77.83033
G01 X153.68028 Y77.87621
G01 X153.60040 Y77.92957
G01 X153.48427 Y78.02490
G01 X153.45607 Y78.04801
G01 X153.38815 Y78.11593
G01 X153.26966 Y78.26033
G01 X153.24152 Y78.26033
G01 X153.33850 Y78.13399
G01 X153.42041 Y78.05208
G01 X153.49829 Y77.95053
G01 X153.53684 Y77.88375
G01 X153.57294 Y77.80636
G01 X153.59430 Y77.72663
G01 X153.55800 Y77.63877
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X153.52608 Y75.45747 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X153.52608 Y75.45747
G01 X153.48792 Y75.42648
G01 X153.35757 Y75.32498
G01 X153.31442 Y75.28876
G01 X153.26567 Y75.24467
G01 X153.21122 Y75.18962
G01 X153.16738 Y75.11708
G01 X153.14406 Y75.04375
G01 X153.14088 Y75.03098
G01 X153.13888 Y75.01353
G01 X153.13768 Y74.97281
G01 X153.13768 Y73.06781
G01 X153.13885 Y73.02717
G01 X153.14091 Y73.00959
G01 X153.15163 Y72.96984
G01 X153.16738 Y72.92356
G01 X153.21122 Y72.85102
G01 X153.27114 Y72.79110
G01 X153.34365 Y72.74726
G01 X153.42978 Y72.72079
G01 X153.44728 Y72.71874
G01 X153.48792 Y72.71757
G01 X155.48795 Y72.71757
G01 X155.52856 Y72.71874
G01 X155.54606 Y72.72079
G01 X155.63219 Y72.74726
G01 X155.70473 Y72.79110
G01 X155.76465 Y72.85102
G01 X155.81540 Y72.93708
G01 X155.83222 Y72.97545
G01 X155.85990 Y73.04917
G01 X155.86582 Y73.06781
G01 X155.95675 Y73.26524
G01 X155.97794 Y73.30027
G01 X156.01522 Y73.31985
G01 X156.09409 Y73.35285
G01 X156.17748 Y73.37162
G01 X156.26287 Y73.37563
G01 X156.33994 Y73.37251
G01 X156.37496 Y73.36801
G01 X156.37608 Y73.36702
G01 X156.37611 Y73.36702
G01 X156.43514 Y73.31617
G01 X156.50123 Y73.25237
G01 X156.53305 Y73.21993
G01 X156.58736 Y73.16151
G01 X156.67171 Y73.05221
G01 X156.68931 Y73.02427
G01 X156.69158 Y73.02067
G01 X156.70974 Y72.99146
G01 X156.73067 Y72.96369
G01 X156.85967 Y72.80113
G01 X156.91789 Y72.73692
G01 X156.96656 Y72.68826
G01 X157.03074 Y72.63009
G01 X157.19330 Y72.50106
G01 X157.22089 Y72.48026
G01 X157.25063 Y72.46276
G01 X157.43219 Y72.36187
G01 X157.51037 Y72.32488
G01 X157.57400 Y72.29852
G01 X157.65556 Y72.26933
G01 X157.69549 Y72.25793
G01 X157.85515 Y72.21236
G01 X157.88855 Y72.20370
G01 X157.92279 Y72.19890
G01 X158.12901 Y72.17518
G01 X158.21550 Y72.17091
G01 X158.24994 Y72.17007
G01 X159.24994 Y72.17007
G01 X159.28436 Y72.17091
G01 X159.37084 Y72.17518
G01 X159.57707 Y72.19890
G01 X159.61128 Y72.20370
G01 X159.64471 Y72.21236
G01 X159.84430 Y72.26933
G01 X159.92583 Y72.29852
G01 X159.98946 Y72.32486
G01 X160.06777 Y72.36192
G01 X160.24920 Y72.46276
G01 X160.27894 Y72.48026
G01 X160.30655 Y72.50106
G01 X160.46911 Y72.63009
G01 X160.53330 Y72.68826
G01 X160.58199 Y72.73695
G01 X160.64016 Y72.80113
G01 X160.76919 Y72.96369
G01 X160.78999 Y72.99130
G01 X160.80749 Y73.02105
G01 X160.90836 Y73.20251
G01 X160.94539 Y73.28079
G01 X160.95288 Y73.29717
G01 X160.97173 Y73.34439
G01 X161.00089 Y73.42592
G01 X161.05789 Y73.62554
G01 X161.06655 Y73.65897
G01 X161.07135 Y73.69318
G01 X161.09507 Y73.89941
G01 X161.09934 Y73.98589
G01 X161.09934 Y74.05475
G01 X161.09507 Y74.14124
G01 X161.07135 Y74.34746
G01 X161.06655 Y74.38167
G01 X161.05789 Y74.41510
G01 X161.00935 Y74.58513
G01 X161.00091 Y74.61469
G01 X160.97173 Y74.69625
G01 X160.94536 Y74.75988
G01 X160.90831 Y74.83824
G01 X160.90503 Y74.84416
G01 X160.80749 Y75.01962
G01 X160.78999 Y75.04936
G01 X160.76919 Y75.07695
G01 X160.64016 Y75.23951
G01 X160.58199 Y75.30369
G01 X160.53333 Y75.35236
G01 X160.46911 Y75.41058
G01 X160.30655 Y75.53958
G01 X160.27897 Y75.56041
G01 X160.24918 Y75.57794
G01 X160.06777 Y75.67875
G01 X159.98944 Y75.71578
G01 X159.92588 Y75.74212
G01 X159.84430 Y75.77131
G01 X159.64473 Y75.82831
G01 X159.61125 Y75.83697
G01 X159.57704 Y75.84177
G01 X159.37087 Y75.86547
G01 X159.28433 Y75.86973
G01 X159.24994 Y75.87057
G01 X158.24994 Y75.87057
G01 X158.21552 Y75.86973
G01 X158.12896 Y75.86547
G01 X157.92282 Y75.84177
G01 X157.88858 Y75.83697
G01 X157.85512 Y75.82831
G01 X157.65553 Y75.77131
G01 X157.57397 Y75.74212
G01 X157.51037 Y75.71578
G01 X157.43206 Y75.67875
G01 X157.25065 Y75.57794
G01 X157.22086 Y75.56039
G01 X157.19330 Y75.53958
G01 X157.03072 Y75.41055
G01 X156.96653 Y75.35236
G01 X156.91789 Y75.30372
G01 X156.85970 Y75.23953
G01 X156.82221 Y75.19229
G01 X156.73067 Y75.07695
G01 X156.70974 Y75.04919
G01 X156.69158 Y75.01998
G01 X156.65866 Y74.97162
G01 X156.61223 Y74.90898
G01 X156.50130 Y74.78828
G01 X156.46216 Y74.75340
G01 X156.43206 Y74.72544
G01 X156.39851 Y74.69298
G01 X156.37710 Y74.67685
G01 X156.37707 Y74.67682
G01 X156.37075 Y74.67205
G01 X156.31847 Y74.66285
G01 X156.23305 Y74.66285
G01 X156.14893 Y74.67769
G01 X156.07443 Y74.69765
G01 X155.99417 Y74.72686
G01 X155.99328 Y74.72737
G01 X155.97794 Y74.75333
G01 X155.90580 Y74.87548
G01 X155.87385 Y74.95259
G01 X155.86577 Y74.97281
G01 X155.82320 Y75.08386
G01 X155.81474 Y75.10491
G01 X155.76465 Y75.18962
G01 X155.71022 Y75.24464
G01 X155.63938 Y75.30872
G01 X155.57542 Y75.36087
G01 X155.48795 Y75.42526
G01 X155.44728 Y75.45658
G01 X155.34931 Y75.42153
G01 X155.26384 Y75.39554
G01 X155.07710 Y75.34878
G01 X155.00489 Y75.33438
G01 X154.81817 Y75.30667
G01 X154.75338 Y75.30027
G01 X154.56664 Y75.29110
G01 X154.53542 Y75.29031
G01 X154.44045 Y75.29031
G01 X154.40923 Y75.29110
G01 X154.22249 Y75.30027
G01 X154.15770 Y75.30667
G01 X153.97098 Y75.33435
G01 X153.89872 Y75.34878
G01 X153.71200 Y75.39554
G01 X153.62661 Y75.42150
G01 X153.52608 Y75.45747
G01 X153.52430 Y75.46224
G01 X153.49270 Y75.54533
G01 X153.49077 Y75.55035
G01 X153.45859 Y75.63372
G01 X153.40482 Y75.74611
G01 X153.37134 Y75.80367
G01 X153.36562 Y75.81368
G01 X153.33700 Y75.86470
G01 X153.33100 Y75.87519
G01 X153.31924 Y75.89775
G01 X153.25021 Y76.03006
G01 X153.23499 Y76.06102
G01 X153.22384 Y76.09371
G01 X153.17286 Y76.25594
G01 X153.16913 Y76.27222
G01 X153.15699 Y76.34012
G01 X153.14185 Y76.45812
G01 X153.13852 Y76.52594
G01 X153.13852 Y76.59470
G01 X153.14185 Y76.66252
G01 X153.15699 Y76.78053
G01 X153.16913 Y76.84840
G01 X153.17238 Y76.86257
G01 X153.17286 Y76.86470
G01 X153.22382 Y77.02693
G01 X153.23499 Y77.05962
G01 X153.25021 Y77.09064
G01 X153.32892 Y77.24146
G01 X153.33776 Y77.25556
G01 X153.37284 Y77.30646
G01 X153.37715 Y77.31215
G01 X153.41010 Y77.35962
G01 X153.43944 Y77.40580
G01 X153.47682 Y77.47192
G01 X153.51274 Y77.54362
G01 X153.52153 Y77.56165
G01 X153.55800 Y77.63877
G01 X153.59397 Y77.72576
G01 X153.60040 Y77.73107
G01 X153.68028 Y77.78444
G01 X153.76608 Y77.83033
G01 X155.20974 Y77.83033
G01 X155.29559 Y77.87621
G01 X155.37547 Y77.92957
G01 X155.51980 Y78.04801
G01 X155.58774 Y78.11593
G01 X155.70618 Y78.26028
G01 X155.91401 Y78.26033
G01 X155.83585 Y78.23938
G01 X155.75838 Y78.20323
G01 X155.69160 Y78.16465
G01 X155.59038 Y78.08703
G01 X155.55556 Y78.05220
G01 X155.51576 Y78.00432
G01 X155.49811 Y77.98312
G01 X155.46735 Y77.93839
G01 X155.41606 Y77.84242
G01 X155.38721 Y77.73747
G01 X155.38495 Y77.72327
G01 X155.41065 Y77.65568
G01 X155.46216 Y77.54243
G01 X155.49983 Y77.47260
G01 X155.51175 Y77.45134
G01 X155.55104 Y77.38380
G01 X155.59869 Y77.31215
G01 X155.60298 Y77.30648
G01 X155.63633 Y77.25835
G01 X155.63809 Y77.25556
G01 X155.64692 Y77.24144
G01 X155.72564 Y77.09064
G01 X155.74085 Y77.05965
G01 X155.75203 Y77.02693
G01 X155.78241 Y76.93021
G01 X155.80301 Y76.86460
G01 X155.80674 Y76.84840
G01 X155.81886 Y76.78055
G01 X155.83400 Y76.66254
G01 X155.83732 Y76.59475
G01 X155.83732 Y76.52589
G01 X155.83400 Y76.45810
G01 X155.81886 Y76.34009
G01 X155.80672 Y76.27222
G01 X155.80301 Y76.25602
G01 X155.75200 Y76.09371
G01 X155.74085 Y76.06102
G01 X155.72564 Y76.03006
G01 X155.64487 Y75.87527
G01 X155.63885 Y75.86470
G01 X155.62391 Y75.83809
G01 X155.60374 Y75.80430
G01 X155.59557 Y75.79145
G01 X155.52051 Y75.63682
G01 X155.51891 Y75.63237
G01 X155.48919 Y75.55970
G01 X155.48497 Y75.55053
G01 X155.44728 Y75.45658
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.90580 Y74.87548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.90580 Y74.87548
G01 X155.97794 Y74.75335
G01 X155.97794 Y73.30027
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37608 Y73.36702 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37608 Y73.36702
G01 X156.30986 Y73.58544
G01 X156.29112 Y73.67964
G01 X156.26229 Y73.97228
G01 X156.26229 Y74.06834
G01 X156.29112 Y74.36097
G01 X156.30986 Y74.45518
G01 X156.37707 Y74.67682
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X159.58992 Y77.11624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X159.58992 Y77.11624
G01 X159.58992 Y77.14144
G01 X159.59060 Y77.14149
G01 X159.68481 Y77.16023
G01 X159.96619 Y77.24560
G01 X160.05494 Y77.28235
G01 X160.31428 Y77.42096
G01 X160.39413 Y77.47433
G01 X160.62144 Y77.66087
G01 X160.68938 Y77.72881
G01 X160.87592 Y77.95614
G01 X160.92929 Y78.03597
G01 X161.04920 Y78.26033
G01 X161.07633 Y78.26033
G01 X161.01189 Y78.12652
G01 X160.89177 Y77.93539
G01 X160.75100 Y77.75886
G01 X160.59139 Y77.59922
G01 X160.41486 Y77.45845
G01 X160.22373 Y77.33834
G01 X160.02035 Y77.24042
G01 X159.80724 Y77.16585
G01 X159.58992 Y77.11624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X159.58992 Y81.05921 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X159.58992 Y81.05921
G01 X159.58992 Y81.08443
G01 X159.80722 Y81.03482
G01 X160.02032 Y80.96025
G01 X160.22375 Y80.86228
G01 X160.41489 Y80.74219
G01 X160.59139 Y80.60145
G01 X160.75100 Y80.44181
G01 X160.89177 Y80.26528
G01 X161.01189 Y80.07415
G01 X161.07633 Y79.94034
G01 X161.04917 Y79.94034
G01 X160.92929 Y80.16465
G01 X160.87592 Y80.24453
G01 X160.68938 Y80.47183
G01 X160.62144 Y80.53975
G01 X160.39413 Y80.72629
G01 X160.31428 Y80.77966
G01 X160.05494 Y80.91826
G01 X159.96619 Y80.95504
G01 X159.68481 Y81.04039
G01 X159.59060 Y81.05913
G01 X159.58992 Y81.05921
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.40052 Y89.22592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.40052 Y89.22592
G01 X156.40052 Y89.29473
G01 X156.40478 Y89.38129
G01 X156.42848 Y89.58744
G01 X156.43326 Y89.62165
G01 X156.44194 Y89.65513
G01 X156.49894 Y89.85469
G01 X156.52813 Y89.93628
G01 X156.55447 Y89.99988
G01 X156.59150 Y90.07816
G01 X156.69231 Y90.25957
G01 X156.70986 Y90.28936
G01 X156.73067 Y90.31695
G01 X156.85970 Y90.47953
G01 X156.91789 Y90.54372
G01 X156.96653 Y90.59236
G01 X157.03072 Y90.65055
G01 X157.19330 Y90.77958
G01 X157.22086 Y90.80039
G01 X157.25065 Y90.81794
G01 X157.43206 Y90.91875
G01 X157.51037 Y90.95578
G01 X157.57397 Y90.98212
G01 X157.65553 Y91.01131
G01 X157.85512 Y91.06831
G01 X157.88858 Y91.07697
G01 X157.92282 Y91.08177
G01 X158.12896 Y91.10547
G01 X158.21552 Y91.10973
G01 X158.24994 Y91.11057
G01 X159.24994 Y91.11057
G01 X159.28433 Y91.10973
G01 X159.37087 Y91.10547
G01 X159.57704 Y91.08177
G01 X159.61125 Y91.07697
G01 X159.64473 Y91.06831
G01 X159.84430 Y91.01131
G01 X159.92588 Y90.98212
G01 X159.98944 Y90.95578
G01 X160.06777 Y90.91875
G01 X160.15626 Y90.86958
G01 X160.24918 Y90.81794
G01 X160.27894 Y90.80041
G01 X160.30655 Y90.77958
G01 X160.46911 Y90.65058
G01 X160.53333 Y90.59236
G01 X160.58199 Y90.54369
G01 X160.64016 Y90.47951
G01 X160.76919 Y90.31695
G01 X160.78997 Y90.28939
G01 X160.80749 Y90.25960
G01 X160.81748 Y90.24166
G01 X160.90836 Y90.07816
G01 X160.94536 Y89.99988
G01 X160.97173 Y89.93625
G01 X161.00091 Y89.85469
G01 X161.00894 Y89.82655
G01 X161.05789 Y89.65510
G01 X161.06655 Y89.62167
G01 X161.07135 Y89.58746
G01 X161.09507 Y89.38124
G01 X161.09934 Y89.29475
G01 X161.09934 Y89.22589
G01 X161.09507 Y89.13941
G01 X161.07135 Y88.93318
G01 X161.06655 Y88.89897
G01 X161.05789 Y88.86554
G01 X161.02362 Y88.74545
G01 X161.00089 Y88.66592
G01 X160.98514 Y88.62191
G01 X160.97173 Y88.58439
G01 X160.94539 Y88.52079
G01 X160.90836 Y88.44251
G01 X160.80749 Y88.26105
G01 X160.78999 Y88.23130
G01 X160.76919 Y88.20369
G01 X160.64016 Y88.04113
G01 X160.58199 Y87.97695
G01 X160.53330 Y87.92826
G01 X160.46911 Y87.87009
G01 X160.30655 Y87.74106
G01 X160.27894 Y87.72026
G01 X160.24920 Y87.70276
G01 X160.06777 Y87.60192
G01 X159.98946 Y87.56486
G01 X159.92583 Y87.53852
G01 X159.84430 Y87.50933
G01 X159.64471 Y87.45236
G01 X159.61128 Y87.44370
G01 X159.57707 Y87.43890
G01 X159.37084 Y87.41518
G01 X159.28436 Y87.41091
G01 X159.24994 Y87.41007
G01 X158.24994 Y87.41007
G01 X158.21550 Y87.41091
G01 X158.12901 Y87.41518
G01 X157.92279 Y87.43890
G01 X157.88858 Y87.44370
G01 X157.85515 Y87.45236
G01 X157.72561 Y87.48935
G01 X157.65553 Y87.50933
G01 X157.57400 Y87.53852
G01 X157.51037 Y87.56488
G01 X157.43206 Y87.60192
G01 X157.25063 Y87.70276
G01 X157.22089 Y87.72026
G01 X157.19330 Y87.74106
G01 X157.03074 Y87.87009
G01 X156.96656 Y87.92826
G01 X156.91789 Y87.97692
G01 X156.85967 Y88.04113
G01 X156.73067 Y88.20369
G01 X156.70984 Y88.23128
G01 X156.69231 Y88.26107
G01 X156.62183 Y88.38795
G01 X156.59150 Y88.44251
G01 X156.55447 Y88.52081
G01 X156.52813 Y88.58436
G01 X156.49894 Y88.66595
G01 X156.44194 Y88.86552
G01 X156.43328 Y88.89899
G01 X156.42848 Y88.93321
G01 X156.40478 Y89.13938
G01 X156.40052 Y89.22592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.17593 Y93.50384 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.17593 Y93.50384
G01 X156.17593 Y95.17511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.42879 Y93.54369 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.42879 Y93.54369
G01 X156.42838 Y93.54397
G01 X156.39521 Y93.62405
G01 X156.30986 Y93.90544
G01 X156.29112 Y93.99964
G01 X156.26229 Y94.29228
G01 X156.26229 Y94.38834
G01 X156.29112 Y94.68097
G01 X156.30986 Y94.77518
G01 X156.39521 Y95.05659
G01 X156.42978 Y95.14003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.64527 Y95.77658 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.64527 Y95.77658
G01 X155.68297 Y95.87053
G01 X155.68718 Y95.87970
G01 X155.71690 Y95.95237
G01 X155.71850 Y95.95682
G01 X155.79356 Y96.11145
G01 X155.80174 Y96.12430
G01 X155.82190 Y96.15809
G01 X155.83684 Y96.18470
G01 X155.84289 Y96.19527
G01 X155.92366 Y96.35003
G01 X155.93887 Y96.38102
G01 X155.95002 Y96.41371
G01 X156.00100 Y96.57602
G01 X156.00473 Y96.59222
G01 X156.01685 Y96.66007
G01 X156.03201 Y96.77813
G01 X156.03534 Y96.84589
G01 X156.03534 Y96.91475
G01 X156.03201 Y96.98252
G01 X156.01685 Y97.10058
G01 X156.00473 Y97.16840
G01 X156.00100 Y97.18468
G01 X155.95185 Y97.34107
G01 X155.95005 Y97.34696
G01 X155.92968 Y97.41386
G01 X155.92472 Y97.43083
G01 X155.90354 Y97.50693
G01 X155.88335 Y97.60083
G01 X155.86928 Y97.69171
G01 X155.86285 Y97.74061
G01 X155.85909 Y97.77528
G01 X155.88086 Y97.81803
G01 X155.92612 Y97.89042
G01 X155.98325 Y97.95387
G01 X156.05050 Y98.00644
G01 X156.08660 Y98.02989
G01 X156.11517 Y98.04846
G01 X156.19061 Y98.08856
G01 X156.27187 Y98.11498
G01 X156.35647 Y98.12686
G01 X156.43351 Y98.13090
G01 X156.51891 Y98.12793
G01 X156.60247 Y98.11015
G01 X156.68169 Y98.07812
G01 X156.75040 Y98.04310
G01 X156.86463 Y97.96248
G01 X156.87029 Y97.95712
G01 X156.88002 Y97.94769
G01 X156.90847 Y97.91922
G01 X157.08497 Y97.77848
G01 X157.27611 Y97.65836
G01 X157.47953 Y97.56039
G01 X157.69259 Y97.48585
G01 X157.90991 Y97.43624
G01 X157.90991 Y97.46144
G01 X157.90928 Y97.46149
G01 X157.81507 Y97.48023
G01 X157.53366 Y97.56560
G01 X157.44494 Y97.60235
G01 X157.18561 Y97.74096
G01 X157.10572 Y97.79433
G01 X156.87842 Y97.98087
G01 X156.81050 Y98.04881
G01 X156.62396 Y98.27612
G01 X156.57060 Y98.35597
G01 X156.45066 Y98.58033
G01 X155.90418 Y98.58028
G01 X155.78574 Y98.43593
G01 X155.71782 Y98.36801
G01 X155.57347 Y98.24957
G01 X155.49361 Y98.19621
G01 X155.40773 Y98.15033
G01 X154.95231 Y98.15033
G01 X154.76468 Y98.15031
G01 X154.63844 Y98.15031
G01 X154.60715 Y98.15033
G01 X153.96407 Y98.15033
G01 X153.87827 Y98.10444
G01 X153.79841 Y98.05107
G01 X153.79199 Y98.04579
G01 X153.79196 Y98.04579
G01 X153.75602 Y97.95879
G01 X153.71955 Y97.88165
G01 X153.71076 Y97.86359
G01 X153.67482 Y97.79186
G01 X153.63738 Y97.72567
G01 X153.60802 Y97.67949
G01 X153.57515 Y97.63212
G01 X153.57086 Y97.62646
G01 X153.53578 Y97.57561
G01 X153.52691 Y97.56146
G01 X153.44822 Y97.41069
G01 X153.43298 Y97.37965
G01 X153.42183 Y97.34693
G01 X153.37086 Y97.18465
G01 X153.36712 Y97.16840
G01 X153.35498 Y97.10053
G01 X153.33984 Y96.98252
G01 X153.33651 Y96.91470
G01 X153.33651 Y96.84594
G01 X153.33984 Y96.77813
G01 X153.35498 Y96.66012
G01 X153.36712 Y96.59222
G01 X153.37086 Y96.57602
G01 X153.40926 Y96.45374
G01 X153.42181 Y96.41371
G01 X153.43296 Y96.38110
G01 X153.44820 Y96.35001
G01 X153.52887 Y96.19547
G01 X153.53504 Y96.18468
G01 X153.56364 Y96.13368
G01 X153.56933 Y96.12372
G01 X153.60283 Y96.06611
G01 X153.65655 Y95.95377
G01 X153.68879 Y95.87038
G01 X153.72234 Y95.78209
G01 X153.72407 Y95.77747
G01 X153.82460 Y95.74150
G01 X153.91000 Y95.71554
G01 X154.09671 Y95.66878
G01 X154.16897 Y95.65435
G01 X154.35569 Y95.62667
G01 X154.42049 Y95.62027
G01 X154.60723 Y95.61110
G01 X154.63844 Y95.61033
G01 X154.73344 Y95.61033
G01 X154.76463 Y95.61110
G01 X154.95137 Y95.62027
G01 X155.01617 Y95.62667
G01 X155.20288 Y95.65435
G01 X155.27514 Y95.66878
G01 X155.46186 Y95.71554
G01 X155.54731 Y95.74153
G01 X155.64527 Y95.77658
G01 X155.68594 Y95.74526
G01 X155.77342 Y95.68087
G01 X155.83737 Y95.62872
G01 X155.90821 Y95.56464
G01 X155.96275 Y95.50950
G01 X155.99719 Y95.46045
G01 X156.02752 Y95.41348
G01 X156.09902 Y95.29281
G01 X156.12813 Y95.24663
G01 X156.17593 Y95.17511
G01 X156.18109 Y95.17297
G01 X156.26254 Y95.14729
G01 X156.34723 Y95.13614
G01 X156.42930 Y95.13970
G01 X156.42978 Y95.14003
G01 X156.42980 Y95.14005
G01 X156.43229 Y95.14178
G01 X156.43506 Y95.14371
G01 X156.50356 Y95.19113
G01 X156.67113 Y95.34109
G01 X156.67687 Y95.34785
G01 X156.72421 Y95.39865
G01 X156.72622 Y95.40061
G01 X156.78670 Y95.46756
G01 X156.85970 Y95.55953
G01 X156.91789 Y95.62372
G01 X156.96653 Y95.67236
G01 X157.03072 Y95.73055
G01 X157.16691 Y95.83866
G01 X157.19330 Y95.85958
G01 X157.22089 Y95.88041
G01 X157.25065 Y95.89794
G01 X157.43206 Y95.99875
G01 X157.51037 Y96.03578
G01 X157.57397 Y96.06212
G01 X157.65553 Y96.09131
G01 X157.85512 Y96.14831
G01 X157.88858 Y96.15697
G01 X157.92282 Y96.16177
G01 X158.12896 Y96.18547
G01 X158.21552 Y96.18973
G01 X158.24994 Y96.19057
G01 X159.24994 Y96.19057
G01 X159.28433 Y96.18973
G01 X159.37087 Y96.18547
G01 X159.57704 Y96.16177
G01 X159.61125 Y96.15697
G01 X159.64473 Y96.14831
G01 X159.84430 Y96.09131
G01 X159.92588 Y96.06212
G01 X159.98944 Y96.03578
G01 X160.06777 Y95.99875
G01 X160.24918 Y95.89794
G01 X160.27897 Y95.88041
G01 X160.30655 Y95.85958
G01 X160.46911 Y95.73058
G01 X160.53333 Y95.67236
G01 X160.58199 Y95.62369
G01 X160.64016 Y95.55951
G01 X160.76919 Y95.39695
G01 X160.78999 Y95.36936
G01 X160.80749 Y95.33962
G01 X160.90836 Y95.15814
G01 X160.94536 Y95.07988
G01 X160.97173 Y95.01625
G01 X161.00091 Y94.93469
G01 X161.02090 Y94.86464
G01 X161.05789 Y94.73510
G01 X161.06655 Y94.70167
G01 X161.07135 Y94.66746
G01 X161.09507 Y94.46124
G01 X161.09934 Y94.37475
G01 X161.09934 Y94.30589
G01 X161.09507 Y94.21941
G01 X161.07135 Y94.01318
G01 X161.06655 Y93.97897
G01 X161.05789 Y93.94554
G01 X161.01031 Y93.77894
G01 X161.00089 Y93.74590
G01 X160.98588 Y93.70394
G01 X160.97173 Y93.66442
G01 X160.94539 Y93.60079
G01 X160.90833 Y93.52248
G01 X160.80749 Y93.34105
G01 X160.78999 Y93.31130
G01 X160.76919 Y93.28369
G01 X160.64016 Y93.12113
G01 X160.58199 Y93.05695
G01 X160.53330 Y93.00826
G01 X160.46911 Y92.95009
G01 X160.30655 Y92.82106
G01 X160.27894 Y92.80026
G01 X160.24920 Y92.78276
G01 X160.06777 Y92.68192
G01 X159.98946 Y92.64486
G01 X159.92583 Y92.61852
G01 X159.84430 Y92.58933
G01 X159.64471 Y92.53236
G01 X159.61128 Y92.52370
G01 X159.57707 Y92.51890
G01 X159.37084 Y92.49518
G01 X159.28436 Y92.49091
G01 X159.24994 Y92.49007
G01 X158.24994 Y92.49007
G01 X158.21550 Y92.49091
G01 X158.12901 Y92.49518
G01 X157.92279 Y92.51890
G01 X157.88858 Y92.52370
G01 X157.85515 Y92.53236
G01 X157.72561 Y92.56934
G01 X157.65553 Y92.58933
G01 X157.57400 Y92.61852
G01 X157.51037 Y92.64488
G01 X157.43206 Y92.68192
G01 X157.25063 Y92.78276
G01 X157.22089 Y92.80026
G01 X157.19330 Y92.82106
G01 X157.03074 Y92.95009
G01 X156.96656 Y93.00826
G01 X156.91789 Y93.05692
G01 X156.85967 Y93.12113
G01 X156.78665 Y93.21313
G01 X156.74332 Y93.26279
G01 X156.72655 Y93.28029
G01 X156.70547 Y93.30328
G01 X156.67867 Y93.33378
G01 X156.57933 Y93.42880
G01 X156.51431 Y93.48148
G01 X156.43717 Y93.53813
G01 X156.42879 Y93.54369
G01 X156.35823 Y93.54511
G01 X156.27380 Y93.53198
G01 X156.19889 Y93.51351
G01 X156.17753 Y93.50622
G01 X156.09828 Y93.38781
G01 X156.05492 Y93.30981
G01 X156.01276 Y93.24237
G01 X155.96275 Y93.17115
G01 X155.90270 Y93.11110
G01 X155.83021 Y93.06726
G01 X155.74408 Y93.04079
G01 X155.72658 Y93.03874
G01 X155.68594 Y93.03757
G01 X153.68594 Y93.03757
G01 X153.64528 Y93.03874
G01 X153.62778 Y93.04079
G01 X153.54165 Y93.06726
G01 X153.46915 Y93.11110
G01 X153.40921 Y93.17105
G01 X153.36534 Y93.24359
G01 X153.33890 Y93.32967
G01 X153.33685 Y93.34717
G01 X153.33568 Y93.38781
G01 X153.33568 Y95.29281
G01 X153.33685 Y95.33347
G01 X153.33890 Y95.35100
G01 X153.34596 Y95.37825
G01 X153.36537 Y95.43708
G01 X153.40921 Y95.50960
G01 X153.46364 Y95.56464
G01 X153.51254 Y95.60886
G01 X153.55569 Y95.64506
G01 X153.68594 Y95.74648
G01 X153.72407 Y95.77747
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X153.79199 Y98.04579 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X153.79199 Y98.04579
G01 X153.79232 Y98.04660
G01 X153.77093 Y98.12641
G01 X153.73481 Y98.20385
G01 X153.69623 Y98.27065
G01 X153.61843 Y98.37203
G01 X153.53651 Y98.45397
G01 X153.43954 Y98.58033
G01 X153.46766 Y98.58033
G01 X153.58615 Y98.43593
G01 X153.65407 Y98.36801
G01 X153.68226 Y98.34487
G01 X153.79841 Y98.24957
G01 X153.87827 Y98.19621
G01 X153.96407 Y98.15033
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.40773 Y98.15033 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.40773 Y98.15033
G01 X155.49361 Y98.10444
G01 X155.57347 Y98.05107
G01 X155.71782 Y97.93261
G01 X155.78574 Y97.86469
G01 X155.85909 Y97.77528
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X159.58992 Y101.37921 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X159.58992 Y101.37921
G01 X159.59060 Y101.37913
G01 X159.68481 Y101.36039
G01 X159.96619 Y101.27504
G01 X160.05494 Y101.23826
G01 X160.31428 Y101.09966
G01 X160.39413 Y101.04629
G01 X160.62144 Y100.85975
G01 X160.68938 Y100.79183
G01 X160.87592 Y100.56453
G01 X160.92929 Y100.48465
G01 X161.04917 Y100.26034
G01 X161.07633 Y100.26034
G01 X161.01189 Y100.39415
G01 X160.89177 Y100.58528
G01 X160.75100 Y100.76181
G01 X160.59139 Y100.92145
G01 X160.41489 Y101.06219
G01 X160.22375 Y101.18228
G01 X160.02032 Y101.28025
G01 X159.80722 Y101.35482
G01 X159.58992 Y101.40443
G01 X159.58992 Y101.37921
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X159.58992 Y97.43624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X159.58992 Y97.43624
G01 X159.80724 Y97.48585
G01 X160.02035 Y97.56042
G01 X160.22373 Y97.65834
G01 X160.41486 Y97.77845
G01 X160.59139 Y97.91922
G01 X160.75100 Y98.07886
G01 X160.89177 Y98.25539
G01 X161.01189 Y98.44652
G01 X161.07633 Y98.58033
G01 X161.04920 Y98.58033
G01 X160.92929 Y98.35597
G01 X160.87592 Y98.27612
G01 X160.68938 Y98.04881
G01 X160.62144 Y97.98087
G01 X160.39413 Y97.79433
G01 X160.31428 Y97.74096
G01 X160.05494 Y97.60235
G01 X159.96619 Y97.56560
G01 X159.68481 Y97.48023
G01 X159.59060 Y97.46149
G01 X159.58992 Y97.46144
G01 X159.58992 Y97.43624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X155.52592 Y100.62285 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X155.52592 Y100.62285
G01 X155.57347 Y100.59107
G01 X155.71782 Y100.47261
G01 X155.78574 Y100.40469
G01 X155.90418 Y100.26034
G01 X156.45068 Y100.26034
G01 X156.57060 Y100.48465
G01 X156.62396 Y100.56453
G01 X156.81050 Y100.79183
G01 X156.87842 Y100.85975
G01 X157.10572 Y101.04629
G01 X157.18561 Y101.09966
G01 X157.44494 Y101.23826
G01 X157.53366 Y101.27504
G01 X157.81507 Y101.36039
G01 X157.90928 Y101.37913
G01 X157.90991 Y101.37918
G01 X157.90991 Y101.40443
G01 X157.69261 Y101.35482
G01 X157.47953 Y101.28025
G01 X157.27611 Y101.18228
G01 X157.08497 Y101.06219
G01 X156.90844 Y100.92142
G01 X156.74880 Y100.76178
G01 X156.62282 Y100.60380
G01 X156.53079 Y100.51515
G01 X156.46874 Y100.46933
G01 X156.39584 Y100.42475
G01 X156.31629 Y100.39351
G01 X156.23255 Y100.37659
G01 X156.15591 Y100.36796
G01 X156.07049 Y100.36582
G01 X155.98601 Y100.37855
G01 X155.90504 Y100.40578
G01 X155.83433 Y100.43664
G01 X155.72749 Y100.50281
G01 X155.72653 Y100.50156
G01 X155.54758 Y100.63900
G01 X155.52592 Y100.65152
G01 X155.52592 Y100.62285
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X153.43956 Y100.26034 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X153.43956 Y100.26034
G01 X153.46768 Y100.26034
G01 X153.58615 Y100.40469
G01 X153.65407 Y100.47261
G01 X153.79841 Y100.59107
G01 X153.84591 Y100.62282
G01 X153.84591 Y100.65152
G01 X153.82414 Y100.63895
G01 X153.67205 Y100.52224
G01 X153.53651 Y100.38670
G01 X153.43956 Y100.26034
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X148.96172 Y96.11833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X148.96172 Y96.11833
G01 X148.96398 Y96.08387
G01 X148.97805 Y95.92877
G01 X148.97823 Y95.92771
G01 X148.99342 Y95.86040
G01 X149.02560 Y95.74470
G01 X149.03838 Y95.71013
G01 X149.06540 Y95.64676
G01 X149.10226 Y95.57084
G01 X149.13927 Y95.50840
G01 X149.17719 Y95.45100
G01 X149.20602 Y95.41171
G01 X149.27701 Y95.33005
G01 X149.28087 Y95.32568
G01 X149.32474 Y95.28029
G01 X149.33426 Y95.27132
G01 X149.44658 Y95.18153
G01 X149.48374 Y95.15379
G01 X149.50358 Y95.14272
G01 X149.64168 Y95.06845
G01 X149.65120 Y95.06342
G01 X149.70581 Y95.04323
G01 X149.74747 Y95.02974
G01 X149.83139 Y95.00264
G01 X149.85565 Y94.99695
G01 X149.87208 Y94.99332
G01 X149.92347 Y94.98455
G01 X150.01894 Y94.97188
G01 X150.07952 Y94.96891
G01 X150.14833 Y94.96891
G01 X150.20891 Y94.97188
G01 X150.30436 Y94.98455
G01 X150.37216 Y94.99695
G01 X150.39644 Y95.00264
G01 X150.52202 Y95.04323
G01 X150.57665 Y95.06342
G01 X150.58618 Y95.06845
G01 X150.72428 Y95.14272
G01 X150.74409 Y95.15379
G01 X150.78127 Y95.18153
G01 X150.89362 Y95.27135
G01 X150.90312 Y95.28031
G01 X150.95085 Y95.33005
G01 X151.02181 Y95.41168
G01 X151.05067 Y95.45100
G01 X151.08861 Y95.50846
G01 X151.12557 Y95.57084
G01 X151.16245 Y95.64681
G01 X151.18945 Y95.71008
G01 X151.20223 Y95.74470
G01 X151.23441 Y95.86035
G01 X151.24963 Y95.92768
G01 X151.24980 Y95.92877
G01 X151.26387 Y96.08387
G01 X151.26614 Y96.11833
G01 X151.26588 Y96.12392
G01 X151.26387 Y96.15278
G01 X151.25151 Y96.28912
G01 X151.24980 Y96.30792
G01 X151.24963 Y96.30896
G01 X151.23441 Y96.37632
G01 X151.20223 Y96.49194
G01 X151.18945 Y96.52656
G01 X151.16245 Y96.58983
G01 X151.12557 Y96.66581
G01 X151.08861 Y96.72819
G01 X151.05067 Y96.78564
G01 X151.02181 Y96.82496
G01 X150.95085 Y96.90660
G01 X150.90312 Y96.95633
G01 X150.89362 Y96.96532
G01 X150.80233 Y97.03827
G01 X150.78127 Y97.05511
G01 X150.74409 Y97.08285
G01 X150.72433 Y97.09390
G01 X150.58620 Y97.16819
G01 X150.57663 Y97.17325
G01 X150.52197 Y97.19347
G01 X150.39644 Y97.23403
G01 X150.37211 Y97.23972
G01 X150.30436 Y97.25211
G01 X150.20894 Y97.26476
G01 X150.14833 Y97.26774
G01 X150.07952 Y97.26774
G01 X150.01892 Y97.26476
G01 X149.92347 Y97.25211
G01 X149.85570 Y97.23972
G01 X149.83139 Y97.23403
G01 X149.70586 Y97.19347
G01 X149.65120 Y97.17325
G01 X149.64165 Y97.16819
G01 X149.50353 Y97.09390
G01 X149.48377 Y97.08285
G01 X149.44658 Y97.05511
G01 X149.33421 Y96.96530
G01 X149.32474 Y96.95636
G01 X149.27701 Y96.90660
G01 X149.20604 Y96.82496
G01 X149.17719 Y96.78564
G01 X149.13927 Y96.72824
G01 X149.10226 Y96.66581
G01 X149.06540 Y96.58989
G01 X149.03838 Y96.52651
G01 X149.02560 Y96.49194
G01 X148.99342 Y96.37627
G01 X148.97823 Y96.30896
G01 X148.97805 Y96.30789
G01 X148.96398 Y96.15278
G01 X148.96172 Y96.11833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.80172 Y96.11833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.80172 Y96.11833
G01 X138.80398 Y96.08387
G01 X138.81805 Y95.92877
G01 X138.81823 Y95.92771
G01 X138.83342 Y95.86040
G01 X138.86560 Y95.74470
G01 X138.87838 Y95.71013
G01 X138.90540 Y95.64676
G01 X138.94226 Y95.57084
G01 X138.97927 Y95.50840
G01 X139.01719 Y95.45100
G01 X139.04602 Y95.41171
G01 X139.11701 Y95.33005
G01 X139.12087 Y95.32568
G01 X139.16474 Y95.28029
G01 X139.17426 Y95.27132
G01 X139.28658 Y95.18153
G01 X139.32374 Y95.15379
G01 X139.34358 Y95.14272
G01 X139.48168 Y95.06845
G01 X139.49120 Y95.06342
G01 X139.54581 Y95.04323
G01 X139.58747 Y95.02974
G01 X139.67139 Y95.00264
G01 X139.69565 Y94.99695
G01 X139.71208 Y94.99332
G01 X139.76347 Y94.98455
G01 X139.85894 Y94.97188
G01 X139.91952 Y94.96891
G01 X139.98833 Y94.96891
G01 X140.04891 Y94.97188
G01 X140.14436 Y94.98455
G01 X140.21216 Y94.99695
G01 X140.23644 Y95.00264
G01 X140.36202 Y95.04323
G01 X140.41665 Y95.06342
G01 X140.42618 Y95.06845
G01 X140.56428 Y95.14272
G01 X140.58409 Y95.15379
G01 X140.62127 Y95.18153
G01 X140.73362 Y95.27135
G01 X140.74312 Y95.28031
G01 X140.79085 Y95.33005
G01 X140.86181 Y95.41168
G01 X140.89067 Y95.45100
G01 X140.92861 Y95.50846
G01 X140.96557 Y95.57084
G01 X141.00245 Y95.64681
G01 X141.02945 Y95.71008
G01 X141.04223 Y95.74470
G01 X141.07441 Y95.86035
G01 X141.08963 Y95.92768
G01 X141.08980 Y95.92877
G01 X141.10387 Y96.08387
G01 X141.10614 Y96.11833
G01 X141.10588 Y96.12392
G01 X141.10387 Y96.15278
G01 X141.09151 Y96.28912
G01 X141.08980 Y96.30792
G01 X141.08963 Y96.30896
G01 X141.07441 Y96.37632
G01 X141.04223 Y96.49194
G01 X141.02945 Y96.52656
G01 X141.00245 Y96.58983
G01 X140.96557 Y96.66581
G01 X140.92861 Y96.72819
G01 X140.89067 Y96.78564
G01 X140.86181 Y96.82496
G01 X140.79085 Y96.90660
G01 X140.74312 Y96.95633
G01 X140.73362 Y96.96532
G01 X140.64233 Y97.03827
G01 X140.62127 Y97.05511
G01 X140.58409 Y97.08285
G01 X140.56433 Y97.09390
G01 X140.42620 Y97.16819
G01 X140.41663 Y97.17325
G01 X140.36197 Y97.19347
G01 X140.23644 Y97.23403
G01 X140.21211 Y97.23972
G01 X140.14436 Y97.25211
G01 X140.04894 Y97.26476
G01 X139.98833 Y97.26774
G01 X139.91952 Y97.26774
G01 X139.85892 Y97.26476
G01 X139.76347 Y97.25211
G01 X139.69570 Y97.23972
G01 X139.67139 Y97.23403
G01 X139.54586 Y97.19347
G01 X139.49120 Y97.17325
G01 X139.48165 Y97.16819
G01 X139.34353 Y97.09390
G01 X139.32377 Y97.08285
G01 X139.28658 Y97.05511
G01 X139.17421 Y96.96530
G01 X139.16474 Y96.95636
G01 X139.11701 Y96.90660
G01 X139.04604 Y96.82496
G01 X139.01719 Y96.78564
G01 X138.97927 Y96.72824
G01 X138.94226 Y96.66581
G01 X138.90540 Y96.58989
G01 X138.87838 Y96.52651
G01 X138.86560 Y96.49194
G01 X138.83342 Y96.37627
G01 X138.81823 Y96.30896
G01 X138.81805 Y96.30789
G01 X138.80398 Y96.15278
G01 X138.80172 Y96.11833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.88790 Y103.43000 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.88790 Y103.43000
G01 X137.88773 Y103.43064
G01 X137.78824 Y103.51227
G01 X137.70838 Y103.56564
G01 X137.57007 Y103.63955
G01 X137.48133 Y103.67631
G01 X137.33124 Y103.72185
G01 X137.23703 Y103.74057
G01 X137.08097 Y103.75596
G01 X136.98491 Y103.75596
G01 X136.82883 Y103.74057
G01 X136.73462 Y103.72185
G01 X136.63632 Y103.69201
G01 X136.58455 Y103.67631
G01 X136.49581 Y103.63955
G01 X136.35750 Y103.56564
G01 X136.27762 Y103.51227
G01 X136.15639 Y103.41278
G01 X136.08847 Y103.34486
G01 X135.98898 Y103.22363
G01 X135.93561 Y103.14375
G01 X135.86170 Y103.00544
G01 X135.82494 Y102.91670
G01 X135.78423 Y102.78248
G01 X135.77940 Y102.76663
G01 X135.76068 Y102.67242
G01 X135.74529 Y102.51634
G01 X135.74529 Y102.42904
G01 X135.74600 Y102.42808
G01 X135.75138 Y102.42091
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X135.26983 Y102.42058 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X135.26983 Y102.42058
G01 X135.27257 Y102.42439
G01 X135.27257 Y102.51634
G01 X135.25720 Y102.67242
G01 X135.23846 Y102.76663
G01 X135.19294 Y102.91670
G01 X135.15619 Y103.00544
G01 X135.08225 Y103.14375
G01 X135.02888 Y103.22363
G01 X134.92939 Y103.34486
G01 X134.86147 Y103.41278
G01 X134.74024 Y103.51227
G01 X134.66038 Y103.56564
G01 X134.52207 Y103.63955
G01 X134.43333 Y103.67631
G01 X134.38156 Y103.69201
G01 X134.28324 Y103.72185
G01 X134.18903 Y103.74057
G01 X134.03297 Y103.75596
G01 X133.93691 Y103.75596
G01 X133.78083 Y103.74057
G01 X133.68662 Y103.72185
G01 X133.58832 Y103.69201
G01 X133.53655 Y103.67631
G01 X133.44781 Y103.63955
G01 X133.43026 Y103.63018
G01 X133.30950 Y103.56564
G01 X133.22962 Y103.51227
G01 X133.12937 Y103.42998
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.72689 Y97.35996 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.72689 Y97.35996
G01 X126.72095 Y97.29931
G01 X126.72092 Y96.80932
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.72092 Y96.18928 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.72092 Y96.18928
G01 X126.67894 Y96.05092
G01 X126.64218 Y95.96218
G01 X126.56824 Y95.82387
G01 X126.51488 Y95.74401
G01 X126.41539 Y95.62278
G01 X126.40832 Y95.61569
G01 X126.34747 Y95.55486
G01 X126.31094 Y95.52486
G01 X126.31094 Y95.48666
G01 X126.39225 Y95.54435
G01 X126.46044 Y95.58039
G01 X126.53916 Y95.61359
G01 X126.62245 Y95.63258
G01 X126.70779 Y95.63683
G01 X126.72613 Y95.63614
G01 X126.72722 Y95.63515
G01 X126.72725 Y95.63515
G01 X126.78308 Y95.58646
G01 X126.91660 Y95.47952
G01 X126.94632 Y95.45692
G01 X126.98206 Y95.43114
G01 X127.06667 Y95.37876
G01 X127.15277 Y95.35230
G01 X127.17027 Y95.35024
G01 X127.21091 Y95.34907
G01 X128.81094 Y95.34907
G01 X128.85158 Y95.35024
G01 X128.86908 Y95.35230
G01 X128.95521 Y95.37876
G01 X129.02770 Y95.42260
G01 X129.08764 Y95.48255
G01 X129.13148 Y95.55504
G01 X129.15795 Y95.64117
G01 X129.16001 Y95.65867
G01 X129.16118 Y95.69931
G01 X129.16118 Y97.29931
G01 X129.16001 Y97.33997
G01 X129.15795 Y97.35747
G01 X129.13148 Y97.44360
G01 X129.08764 Y97.51610
G01 X129.02770 Y97.57607
G01 X128.98142 Y97.60540
G01 X128.95523 Y97.61988
G01 X128.86908 Y97.64635
G01 X128.85158 Y97.64841
G01 X128.81094 Y97.64957
G01 X127.21091 Y97.64957
G01 X127.17025 Y97.64841
G01 X127.15280 Y97.64637
G01 X127.06664 Y97.61988
G01 X126.98201 Y97.56751
G01 X126.90345 Y97.51081
G01 X126.83830 Y97.45854
G01 X126.72692 Y97.35999
G01 X126.72643 Y97.35956
G01 X126.69273 Y97.35887
G01 X126.60835 Y97.37200
G01 X126.53347 Y97.39044
G01 X126.44470 Y97.42161
G01 X126.43639 Y97.42649
G01 X126.36349 Y97.46918
G01 X126.33403 Y97.49049
G01 X126.31094 Y97.50944
G01 X126.31094 Y97.47375
G01 X126.34747 Y97.44378
G01 X126.41539 Y97.37586
G01 X126.51488 Y97.25463
G01 X126.56824 Y97.17475
G01 X126.64218 Y97.03644
G01 X126.67894 Y96.94770
G01 X126.72092 Y96.80932
G01 X126.72273 Y96.79710
G01 X126.73210 Y96.70233
G01 X126.73979 Y96.54549
G01 X126.73979 Y96.45316
G01 X126.73210 Y96.29634
G01 X126.72273 Y96.20160
G01 X126.72092 Y96.18928
G01 X126.72095 Y95.69931
G01 X126.72722 Y95.63515
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X123.35893 Y96.46507 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X123.35893 Y96.46507
G01 X123.35893 Y96.15019
G01 X123.37140 Y96.17211
G01 X123.43690 Y96.20990
G01 X123.51725 Y96.23914
G01 X123.59174 Y96.25908
G01 X123.67577 Y96.27388
G01 X123.76109 Y96.27388
G01 X123.84511 Y96.25908
G01 X123.91961 Y96.23914
G01 X123.99995 Y96.20990
G01 X124.07401 Y96.16715
G01 X124.13949 Y96.11219
G01 X124.19403 Y96.05763
G01 X124.27180 Y95.95623
G01 X124.38549 Y95.75933
G01 X124.50792 Y95.60581
G01 X124.63091 Y95.49172
G01 X124.63091 Y95.52489
G01 X124.59441 Y95.55486
G01 X124.52649 Y95.62278
G01 X124.42700 Y95.74401
G01 X124.37363 Y95.82387
G01 X124.29969 Y95.96218
G01 X124.26294 Y96.05092
G01 X124.21740 Y96.20101
G01 X124.19868 Y96.29522
G01 X124.18331 Y96.45128
G01 X124.18331 Y96.54734
G01 X124.19868 Y96.70342
G01 X124.21740 Y96.79763
G01 X124.26294 Y96.94770
G01 X124.29969 Y97.03644
G01 X124.37363 Y97.17475
G01 X124.42700 Y97.25463
G01 X124.52649 Y97.37586
G01 X124.59441 Y97.44378
G01 X124.63091 Y97.47373
G01 X124.63091 Y97.50695
G01 X124.50795 Y97.39286
G01 X124.38552 Y97.23934
G01 X124.28735 Y97.06931
G01 X124.20218 Y96.85234
G01 X124.19995 Y96.85321
G01 X124.17630 Y96.78940
G01 X124.14026 Y96.72123
G01 X124.09393 Y96.64952
G01 X124.03586 Y96.58694
G01 X123.96784 Y96.53540
G01 X123.90254 Y96.49436
G01 X123.82646 Y96.45534
G01 X123.74480 Y96.43014
G01 X123.65999 Y96.41955
G01 X123.58290 Y96.41668
G01 X123.49761 Y96.42095
G01 X123.41435 Y96.43995
G01 X123.36073 Y96.46258
G01 X123.35893 Y96.46507
G01 X123.34308 Y96.48717
G01 X123.29662 Y96.56428
G01 X123.26794 Y96.61531
G01 X123.21636 Y96.71427
G01 X123.19586 Y96.75100
G01 X123.17059 Y96.79331
G01 X123.14567 Y96.83207
G01 X123.08570 Y96.89204
G01 X123.01321 Y96.93588
G01 X122.92708 Y96.96235
G01 X122.90958 Y96.96441
G01 X122.86894 Y96.96558
G01 X121.16894 Y96.96558
G01 X121.12825 Y96.96441
G01 X121.11080 Y96.96238
G01 X121.02464 Y96.93588
G01 X120.95215 Y96.89204
G01 X120.89221 Y96.83210
G01 X120.84837 Y96.75958
G01 X120.82190 Y96.67355
G01 X120.81984 Y96.65598
G01 X120.81867 Y96.61531
G01 X120.81867 Y94.91531
G01 X120.81984 Y94.87467
G01 X120.82190 Y94.85717
G01 X120.84837 Y94.77104
G01 X120.88433 Y94.71018
G01 X120.89218 Y94.69855
G01 X120.95215 Y94.63861
G01 X121.02464 Y94.59477
G01 X121.11077 Y94.56830
G01 X121.12827 Y94.56624
G01 X121.16894 Y94.56507
G01 X122.86894 Y94.56507
G01 X122.90958 Y94.56624
G01 X122.92708 Y94.56830
G01 X123.01321 Y94.59477
G01 X123.08570 Y94.63861
G01 X123.14564 Y94.69855
G01 X123.18948 Y94.77104
G01 X123.21595 Y94.85717
G01 X123.21801 Y94.87467
G01 X123.21918 Y94.91531
G01 X123.21918 Y95.63673
G01 X123.22525 Y95.72898
G01 X123.23541 Y95.80609
G01 X123.29093 Y96.00957
G01 X123.32286 Y96.08671
G01 X123.35893 Y96.15016
G01 X123.35893 Y96.15019
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.99193 Y88.41794 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.99193 Y88.41794
G01 X130.91047 Y88.46369
G01 X130.84334 Y88.50613
G01 X130.77550 Y88.55427
G01 X130.71517 Y88.61454
G01 X130.70461 Y88.63031
G01 X130.67136 Y88.68703
G01 X130.64489 Y88.77319
G01 X130.64283 Y88.79066
G01 X130.64167 Y88.83130
G01 X130.64167 Y90.43130
G01 X130.64283 Y90.47197
G01 X130.64489 Y90.48949
G01 X130.64863 Y90.50443
G01 X130.67136 Y90.57560
G01 X130.71520 Y90.64811
G01 X130.77512 Y90.70803
G01 X130.84763 Y90.75187
G01 X130.93369 Y90.77834
G01 X130.95124 Y90.78040
G01 X130.99193 Y90.78157
G01 X132.68880 Y90.78157
G01 X132.72744 Y90.78263
G01 X132.76023 Y90.78444
G01 X132.89462 Y90.80468
G01 X132.97176 Y90.82365
G01 X133.19663 Y90.91316
G01 X133.21146 Y90.92132
G01 X133.39193 Y90.92132
G01 X133.48753 Y90.91189
G01 X133.57946 Y90.88400
G01 X133.66416 Y90.83874
G01 X133.73841 Y90.77781
G01 X133.79937 Y90.70354
G01 X133.84463 Y90.61883
G01 X133.84999 Y90.60118
G01 X133.87252 Y90.52691
G01 X133.88194 Y90.43130
G01 X133.88194 Y88.83130
G01 X133.87252 Y88.73572
G01 X133.84463 Y88.64380
G01 X133.79937 Y88.55909
G01 X133.73841 Y88.48482
G01 X133.66416 Y88.42389
G01 X133.57946 Y88.37862
G01 X133.48753 Y88.35074
G01 X133.39193 Y88.34131
G01 X132.90186 Y88.34131
G01 X132.88969 Y88.34312
G01 X132.79493 Y88.35249
G01 X132.63808 Y88.36018
G01 X132.59190 Y88.36130
G01 X131.79193 Y88.36130
G01 X131.74575 Y88.36018
G01 X131.58893 Y88.35249
G01 X131.49419 Y88.34312
G01 X131.48195 Y88.34131
G01 X131.10585 Y88.34131
G01 X130.99193 Y88.41794
G01 X131.10788 Y88.33994
G01 X131.11464 Y88.32020
G01 X131.13310 Y88.24533
G01 X131.14004 Y88.20060
G01 X131.14047 Y88.20146
G01 X131.25480 Y88.26255
G01 X131.34354 Y88.29933
G01 X131.48195 Y88.34131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.90186 Y88.34131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.90186 Y88.34131
G01 X133.04031 Y88.29933
G01 X133.12906 Y88.26255
G01 X133.26737 Y88.18863
G01 X133.34725 Y88.13527
G01 X133.46848 Y88.03578
G01 X133.53640 Y87.96786
G01 X133.56165 Y87.93710
G01 X133.63589 Y87.84662
G01 X133.68926 Y87.76676
G01 X133.76317 Y87.62844
G01 X133.79995 Y87.53969
G01 X133.84547 Y87.38962
G01 X133.86421 Y87.29542
G01 X133.87958 Y87.13933
G01 X133.87958 Y87.04330
G01 X133.86421 Y86.88721
G01 X133.84547 Y86.79300
G01 X133.79995 Y86.64292
G01 X133.76317 Y86.55419
G01 X133.68926 Y86.41586
G01 X133.63589 Y86.33601
G01 X133.53640 Y86.21477
G01 X133.46848 Y86.14685
G01 X133.34725 Y86.04736
G01 X133.26737 Y85.99400
G01 X133.12906 Y85.92006
G01 X133.04031 Y85.88330
G01 X132.89025 Y85.83779
G01 X132.80737 Y85.82133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.57636 Y85.82133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.57636 Y85.82133
G01 X131.49363 Y85.80484
G01 X131.34354 Y85.75933
G01 X131.25480 Y85.72255
G01 X131.11649 Y85.64863
G01 X131.03664 Y85.59527
G01 X130.91540 Y85.49578
G01 X130.84748 Y85.42786
G01 X130.81789 Y85.39181
G01 X130.78568 Y85.39186
G01 X130.80491 Y85.41693
G01 X130.94906 Y85.56105
G01 X130.94748 Y85.56263
G01 X130.99721 Y85.61175
G01 X131.04001 Y85.66603
G01 X131.04263 Y85.66936
G01 X131.08845 Y85.73890
G01 X131.12183 Y85.81521
G01 X131.14179 Y85.89608
G01 X131.15386 Y85.97225
G01 X131.15398 Y85.97403
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.12571 Y88.17128 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.12571 Y88.17128
G01 X131.14004 Y88.20060
G01 X131.14006 Y88.20060
G01 X131.12571 Y88.17128
G01 X131.07875 Y88.08404
G01 X131.03902 Y88.01744
G01 X130.99457 Y87.95000
G01 X130.99066 Y87.94413
G01 X130.95005 Y87.88368
G01 X130.93168 Y87.85765
G01 X130.92419 Y87.84751
G01 X130.91512 Y87.83550
G01 X130.85553 Y87.75836
G01 X130.81609 Y87.70179
G01 X130.81045 Y87.69277
G01 X130.74278 Y87.56313
G01 X130.72759 Y87.53222
G01 X130.71647 Y87.49956
G01 X130.71461 Y87.49369
G01 X130.67263 Y87.36003
G01 X130.67024 Y87.34970
G01 X130.65812 Y87.28178
G01 X130.64525 Y87.18157
G01 X130.64250 Y87.12572
G01 X130.64250 Y87.05691
G01 X130.64525 Y87.00108
G01 X130.65812 Y86.90088
G01 X130.67024 Y86.83298
G01 X130.67263 Y86.82262
G01 X130.71647 Y86.68310
G01 X130.72759 Y86.65048
G01 X130.74281 Y86.61950
G01 X130.81045 Y86.48988
G01 X130.81611 Y86.48086
G01 X130.85553 Y86.42430
G01 X130.92884 Y86.32938
G01 X130.95071 Y86.29951
G01 X130.98368 Y86.25193
G01 X130.99198 Y86.24020
G01 X131.03024 Y86.18719
G01 X131.08304 Y86.10395
G01 X131.13011 Y86.01942
G01 X131.15398 Y85.97403
G01 X131.25480 Y85.92006
G01 X131.34354 Y85.88330
G01 X131.49363 Y85.83779
G01 X131.57636 Y85.82133
G01 X132.80737 Y85.82133
G01 X132.89025 Y85.80484
G01 X133.04031 Y85.75933
G01 X133.12906 Y85.72255
G01 X133.26737 Y85.64863
G01 X133.34725 Y85.59527
G01 X133.46848 Y85.49578
G01 X133.53640 Y85.42786
G01 X133.63589 Y85.30662
G01 X133.68926 Y85.22676
G01 X133.76317 Y85.08844
G01 X133.79995 Y84.99969
G01 X133.80745 Y84.97490
G01 X133.77036 Y84.82684
G01 X133.74524 Y84.74371
G01 X133.68680 Y84.58036
G01 X133.66376 Y84.52456
G01 X133.59254 Y84.37398
G01 X133.57222 Y84.33591
G01 X133.48911 Y84.19723
G01 X133.47112 Y84.17028
G01 X133.37666 Y84.04295
G01 X133.35990 Y84.02250
G01 X133.25446 Y83.90614
G01 X133.23709 Y83.88879
G01 X133.12076 Y83.78336
G01 X133.10028 Y83.76654
G01 X132.97293 Y83.67211
G01 X132.94600 Y83.65415
G01 X132.80735 Y83.57104
G01 X132.76930 Y83.55072
G01 X132.61873 Y83.47950
G01 X132.59190 Y83.46764
G01 X132.14212 Y83.28130
G01 X131.79193 Y83.28130
G01 X131.74555 Y83.28133
G01 X131.57636 Y83.28133
G01 X131.49363 Y83.29779
G01 X131.34354 Y83.34330
G01 X131.25480 Y83.38006
G01 X131.11649 Y83.45400
G01 X131.08248 Y83.47673
G01 X131.03664 Y83.50736
G01 X130.91540 Y83.60685
G01 X130.84748 Y83.67477
G01 X130.81748 Y83.71132
G01 X130.78525 Y83.71132
G01 X130.80491 Y83.68572
G01 X130.94906 Y83.54160
G01 X130.94723 Y83.53977
G01 X131.00113 Y83.48587
G01 X131.04809 Y83.42468
G01 X131.09401 Y83.35262
G01 X131.12670 Y83.27368
G01 X131.14520 Y83.19027
G01 X131.15332 Y83.12832
G01 X131.14520 Y83.11249
G01 X131.12983 Y83.08359
G01 X131.08309 Y82.99873
G01 X131.02538 Y82.90795
G01 X130.99208 Y82.86240
G01 X130.98091 Y82.84671
G01 X130.95071 Y82.80315
G01 X130.92897 Y82.77345
G01 X130.85553 Y82.67836
G01 X130.81609 Y82.62179
G01 X130.81045 Y82.61275
G01 X130.74278 Y82.48313
G01 X130.72759 Y82.45217
G01 X130.71644 Y82.41956
G01 X130.67263 Y82.28001
G01 X130.67024 Y82.26970
G01 X130.65812 Y82.20178
G01 X130.64525 Y82.10157
G01 X130.64250 Y82.04572
G01 X130.64250 Y81.97691
G01 X130.64525 Y81.92108
G01 X130.65812 Y81.82088
G01 X130.67024 Y81.75298
G01 X130.67265 Y81.74254
G01 X130.70938 Y81.62555
G01 X130.71606 Y81.60300
G01 X130.73476 Y81.53574
G01 X130.73488 Y81.53525
G01 X130.75594 Y81.45961
G01 X130.77405 Y81.37836
G01 X130.78909 Y81.28976
G01 X130.79788 Y81.22639
G01 X130.80176 Y81.19045
G01 X130.78050 Y81.14872
G01 X130.76122 Y81.11786
G01 X130.74682 Y81.11130
G01 X130.56600 Y81.02913
G01 X130.48886 Y81.00627
G01 X130.33486 Y80.97742
G01 X130.28825 Y80.97374
G01 X130.23316 Y80.97158
G01 X128.29963 Y80.97158
G01 X128.20738 Y80.97765
G01 X128.13027 Y80.98781
G01 X127.92669 Y81.04336
G01 X127.84957 Y81.07531
G01 X127.78864 Y81.11130
G01 X126.96596 Y81.11130
G01 X126.19601 Y81.88128
G01 X125.89448 Y82.18278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.25537 Y83.82192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.25537 Y83.82192
G01 X124.26294 Y83.84671
G01 X124.29969 Y83.93545
G01 X124.37363 Y84.07376
G01 X124.42700 Y84.15361
G01 X124.44203 Y84.17195
G01 X124.52649 Y84.27485
G01 X124.59441 Y84.34277
G01 X124.71562 Y84.44226
G01 X124.79550 Y84.49562
G01 X124.93380 Y84.56956
G01 X125.02255 Y84.60632
G01 X125.17261 Y84.65183
G01 X125.26685 Y84.67058
G01 X125.42291 Y84.68595
G01 X125.51897 Y84.68595
G01 X125.67503 Y84.67058
G01 X125.76926 Y84.65183
G01 X125.86159 Y84.62382
G01 X125.91932 Y84.60632
G01 X126.00807 Y84.56956
G01 X126.14637 Y84.49562
G01 X126.22626 Y84.44226
G01 X126.34747 Y84.34277
G01 X126.41539 Y84.27485
G01 X126.51488 Y84.15361
G01 X126.56824 Y84.07376
G01 X126.64218 Y83.93545
G01 X126.67894 Y83.84671
G01 X126.72448 Y83.69662
G01 X126.74091 Y83.61376
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.74091 Y83.18275 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.74091 Y83.18275
G01 X126.75740 Y83.10000
G01 X126.80294 Y82.94993
G01 X126.83969 Y82.86119
G01 X126.91363 Y82.72288
G01 X126.96700 Y82.64300
G01 X127.06649 Y82.52177
G01 X127.13441 Y82.45385
G01 X127.25562 Y82.35435
G01 X127.33550 Y82.30099
G01 X127.47380 Y82.22707
G01 X127.56255 Y82.19032
G01 X127.71261 Y82.14478
G01 X127.80685 Y82.12603
G01 X127.96291 Y82.11067
G01 X128.05897 Y82.11067
G01 X128.21503 Y82.12603
G01 X128.30926 Y82.14478
G01 X128.45932 Y82.19032
G01 X128.54807 Y82.22707
G01 X128.68637 Y82.30099
G01 X128.76626 Y82.35435
G01 X128.88747 Y82.45385
G01 X128.95539 Y82.52177
G01 X128.98538 Y82.55832
G01 X129.01660 Y82.55832
G01 X128.97390 Y82.50480
G01 X128.82999 Y82.37127
G01 X128.66773 Y82.26065
G01 X128.49087 Y82.17546
G01 X128.30324 Y82.11760
G01 X128.20438 Y82.10269
G01 X128.11548 Y82.08064
G01 X128.06318 Y82.06233
G01 X127.96438 Y82.01473
G01 X127.87863 Y81.94635
G01 X127.82409 Y81.89182
G01 X127.76921 Y81.82639
G01 X127.72651 Y81.75242
G01 X127.69730 Y81.67216
G01 X127.67733 Y81.59766
G01 X127.66250 Y81.51354
G01 X127.66250 Y81.42812
G01 X127.67733 Y81.34399
G01 X127.69730 Y81.26949
G01 X127.72651 Y81.18923
G01 X127.76263 Y81.12667
G01 X127.78864 Y81.11130
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.32737 Y79.43132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.32737 Y79.43132
G01 X130.88860 Y79.43132
G01 X131.01146 Y79.47529
G01 X131.09635 Y79.50110
G01 X131.25322 Y79.54041
G01 X131.32645 Y79.55502
G01 X131.48327 Y79.57826
G01 X131.54987 Y79.58486
G01 X131.70671 Y79.59254
G01 X131.77115 Y79.59254
G01 X131.92797 Y79.58486
G01 X131.99455 Y79.57826
G01 X132.15139 Y79.55502
G01 X132.22470 Y79.54041
G01 X132.38151 Y79.50110
G01 X132.46635 Y79.47529
G01 X132.58921 Y79.43132
G01 X132.61547 Y79.40978
G01 X132.68339 Y79.34189
G01 X132.78289 Y79.22063
G01 X132.83625 Y79.14075
G01 X132.91019 Y79.00247
G01 X132.94694 Y78.91370
G01 X132.99246 Y78.76363
G01 X133.01121 Y78.66942
G01 X133.02657 Y78.51337
G01 X133.02657 Y78.41728
G01 X133.02195 Y78.37024
G01 X133.04385 Y78.34834
G01 X133.05261 Y78.46533
G01 X133.03793 Y78.66112
G01 X132.98606 Y78.88832
G01 X132.98733 Y78.88860
G01 X132.96902 Y78.96251
G01 X132.96038 Y79.03915
G01 X132.95825 Y79.12452
G01 X132.97095 Y79.20894
G01 X132.99813 Y79.28992
G01 X133.02896 Y79.36061
G01 X133.06091 Y79.41931
G01 X133.08532 Y79.43132
G01 X133.08535 Y79.43132
G01 X133.22929 Y79.50211
G01 X133.30638 Y79.52749
G01 X133.47364 Y79.56284
G01 X133.52906 Y79.56800
G01 X133.59464 Y79.57107
G01 X135.20376 Y79.57107
G01 X135.29599 Y79.56503
G01 X135.37310 Y79.55484
G01 X135.57668 Y79.49929
G01 X135.65380 Y79.46734
G01 X135.72507 Y79.43132
G01 X135.73470 Y79.42647
G01 X135.77686 Y79.35342
G01 X135.78545 Y79.32982
G01 X135.77399 Y79.26457
G01 X135.75570 Y79.17981
G01 X135.75400 Y79.17219
G01 X135.73566 Y79.09053
G01 X135.70841 Y78.99724
G01 X135.68710 Y78.93864
G01 X135.66335 Y78.87351
G01 X135.66236 Y78.87085
G01 X135.65062 Y78.83899
G01 X135.61844 Y78.72327
G01 X135.60323 Y78.65596
G01 X135.60305 Y78.65489
G01 X135.58898 Y78.49980
G01 X135.58672 Y78.46533
G01 X135.58898 Y78.43089
G01 X135.60302 Y78.27583
G01 X135.60323 Y78.27473
G01 X135.61115 Y78.23592
G01 X135.61844 Y78.20742
G01 X135.65062 Y78.09170
G01 X135.66337 Y78.05716
G01 X135.69040 Y77.99376
G01 X135.72728 Y77.91784
G01 X135.76426 Y77.85543
G01 X135.80218 Y77.79800
G01 X135.83104 Y77.75868
G01 X135.90201 Y77.67705
G01 X135.94973 Y77.62731
G01 X135.95923 Y77.61832
G01 X136.07158 Y77.52853
G01 X136.10874 Y77.50079
G01 X136.12857 Y77.48972
G01 X136.26667 Y77.41545
G01 X136.27909 Y77.40892
G01 X136.32967 Y77.38644
G01 X136.34615 Y77.37885
G01 X136.41658 Y77.34540
G01 X136.47218 Y77.31609
G01 X136.54290 Y77.27504
G01 X136.60797 Y77.23359
G01 X136.68052 Y77.18319
G01 X136.68704 Y77.17860
G01 X136.68796 Y77.17796
G01 X136.69090 Y77.17768
G01 X136.78636 Y77.17768
G01 X136.78689 Y77.17806
G01 X136.78750 Y77.17847
G01 X136.78753 Y77.17849
G01 X136.87333 Y77.23580
G01 X136.93518 Y77.27273
G01 X136.94643 Y77.27956
G01 X137.00566 Y77.31611
G01 X137.10155 Y77.36625
G01 X137.14818 Y77.38647
G01 X137.15430 Y77.38916
G01 X137.19857 Y77.40885
G01 X137.21117 Y77.41545
G01 X137.34927 Y77.48972
G01 X137.36911 Y77.50079
G01 X137.40627 Y77.52853
G01 X137.51861 Y77.61832
G01 X137.52811 Y77.62731
G01 X137.57584 Y77.67705
G01 X137.64681 Y77.75868
G01 X137.67566 Y77.79800
G01 X137.71358 Y77.85543
G01 X137.75059 Y77.91784
G01 X137.78745 Y77.99376
G01 X137.81447 Y78.05713
G01 X137.82725 Y78.09170
G01 X137.84343 Y78.14992
G01 X137.86184 Y78.20671
G01 X137.87335 Y78.23770
G01 X137.88567 Y78.27362
G01 X137.89781 Y78.31238
G01 X137.94315 Y78.42551
G01 X137.98407 Y78.50915
G01 X137.99006 Y78.52119
G01 X138.01996 Y78.58037
G01 X138.03797 Y78.59112
G01 X138.11496 Y78.62835
G01 X138.19723 Y78.65159
G01 X138.28229 Y78.66023
G01 X138.35940 Y78.66124
G01 X138.44452 Y78.65497
G01 X138.52727 Y78.63399
G01 X138.54183 Y78.62746
G01 X138.54386 Y78.62467
G01 X138.54389 Y78.62467
G01 X138.58696 Y78.56653
G01 X138.61655 Y78.52134
G01 X138.63494 Y78.49427
G01 X138.66664 Y78.44936
G01 X138.73116 Y78.34026
G01 X138.74602 Y78.30953
G01 X138.75666 Y78.28845
G01 X138.77810 Y78.24761
G01 X138.78803 Y78.22795
G01 X138.81528 Y78.17184
G01 X138.85227 Y78.10940
G01 X138.89019 Y78.05200
G01 X138.91904 Y78.01271
G01 X138.99001 Y77.93105
G01 X139.03774 Y77.88134
G01 X139.04320 Y77.87616
G01 X139.04729 Y77.87230
G01 X139.15958 Y77.78256
G01 X139.19674 Y77.75479
G01 X139.21658 Y77.74375
G01 X139.35468 Y77.66945
G01 X139.36418 Y77.66442
G01 X139.41881 Y77.64423
G01 X139.54442 Y77.60364
G01 X139.56865 Y77.59795
G01 X139.58252 Y77.59485
G01 X139.63647 Y77.58555
G01 X139.73194 Y77.57288
G01 X139.79252 Y77.56991
G01 X139.86133 Y77.56991
G01 X139.92191 Y77.57288
G01 X140.01736 Y77.58555
G01 X140.08516 Y77.59795
G01 X140.10944 Y77.60364
G01 X140.23502 Y77.64423
G01 X140.28965 Y77.66442
G01 X140.29918 Y77.66945
G01 X140.43728 Y77.74375
G01 X140.45709 Y77.75479
G01 X140.49427 Y77.78256
G01 X140.60662 Y77.87237
G01 X140.61612 Y77.88134
G01 X140.66385 Y77.93105
G01 X140.73481 Y78.01271
G01 X140.76367 Y78.05200
G01 X140.80161 Y78.10946
G01 X140.83857 Y78.17184
G01 X140.87545 Y78.24781
G01 X140.90245 Y78.31108
G01 X140.91523 Y78.34570
G01 X140.94741 Y78.46135
G01 X140.96263 Y78.52868
G01 X140.96280 Y78.52977
G01 X140.97687 Y78.68487
G01 X140.97870 Y78.70994
G01 X140.97914 Y78.71931
G01 X140.97687 Y78.75378
G01 X140.97096 Y78.81913
G01 X140.96280 Y78.90887
G01 X140.96263 Y78.90999
G01 X140.94741 Y78.97732
G01 X140.92839 Y79.04567
G01 X140.91038 Y79.12998
G01 X140.90926 Y79.13724
G01 X140.89648 Y79.20211
G01 X140.89344 Y79.21463
G01 X140.87119 Y79.36635
G01 X140.86626 Y79.45014
G01 X140.85041 Y79.45781
G01 X140.69356 Y79.53201
G01 X140.62028 Y79.56244
G01 X140.46346 Y79.61855
G01 X140.40586 Y79.63607
G01 X140.24904 Y79.67537
G01 X140.20172 Y79.68479
G01 X140.04487 Y79.70806
G01 X140.00350 Y79.71214
G01 X139.84668 Y79.71984
G01 X139.80718 Y79.71984
G01 X139.65036 Y79.71214
G01 X139.60893 Y79.70806
G01 X139.45211 Y79.68479
G01 X139.40482 Y79.67537
G01 X139.24800 Y79.63607
G01 X139.19039 Y79.61855
G01 X139.03357 Y79.56244
G01 X138.96029 Y79.53201
G01 X138.80345 Y79.45781
G01 X138.75402 Y79.43132
G01 X138.72961 Y79.39475
G01 X138.65570 Y79.25644
G01 X138.61894 Y79.16770
G01 X138.57340 Y79.01763
G01 X138.56659 Y78.98334
G01 X138.55468 Y78.92342
G01 X138.53929 Y78.76734
G01 X138.53929 Y78.67128
G01 X138.54386 Y78.62467
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.58923 Y79.43132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.58923 Y79.43132
G01 X137.61546 Y79.40978
G01 X137.68341 Y79.34189
G01 X137.78288 Y79.22063
G01 X137.83627 Y79.14075
G01 X137.90558 Y79.01103
G01 X137.91018 Y79.00247
G01 X137.94693 Y78.91370
G01 X137.99248 Y78.76363
G01 X138.01120 Y78.66942
G01 X138.01996 Y78.58037
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X136.68704 Y77.17860 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X136.68704 Y77.17860
G01 X136.71521 Y77.10542
G01 X136.73160 Y77.02160
G01 X136.73317 Y76.93618
G01 X136.72786 Y76.85922
G01 X136.71458 Y76.77484
G01 X136.69032 Y76.70415
G01 X136.60452 Y76.64685
G01 X136.54267 Y76.60992
G01 X136.53142 Y76.60308
G01 X136.47224 Y76.56658
G01 X136.37638 Y76.51642
G01 X136.32972 Y76.49620
G01 X136.32365 Y76.49353
G01 X136.27894 Y76.47367
G01 X136.26665 Y76.46719
G01 X136.12852 Y76.39290
G01 X136.10876 Y76.38187
G01 X136.07158 Y76.35411
G01 X135.95923 Y76.26432
G01 X135.94973 Y76.25533
G01 X135.90201 Y76.20560
G01 X135.83104 Y76.12396
G01 X135.80218 Y76.08464
G01 X135.76426 Y76.02724
G01 X135.72728 Y75.96481
G01 X135.69040 Y75.88889
G01 X135.66337 Y75.82551
G01 X135.65060 Y75.79094
G01 X135.61844 Y75.67527
G01 X135.60323 Y75.60796
G01 X135.60305 Y75.60687
G01 X135.58898 Y75.45178
G01 X135.58672 Y75.41733
G01 X135.58898 Y75.38287
G01 X135.60302 Y75.22785
G01 X135.60323 Y75.22671
G01 X135.61844 Y75.15940
G01 X135.65060 Y75.04370
G01 X135.66337 Y75.00916
G01 X135.69040 Y74.94576
G01 X135.72728 Y74.86984
G01 X135.76426 Y74.80740
G01 X135.80218 Y74.75000
G01 X135.83104 Y74.71068
G01 X135.89515 Y74.63694
G01 X135.90201 Y74.62905
G01 X135.94973 Y74.57931
G01 X135.95923 Y74.57032
G01 X136.07158 Y74.48053
G01 X136.10874 Y74.45279
G01 X136.12857 Y74.44172
G01 X136.26667 Y74.36745
G01 X136.27617 Y74.36242
G01 X136.33081 Y74.34223
G01 X136.40909 Y74.31693
G01 X136.45641 Y74.30161
G01 X136.48064 Y74.29595
G01 X136.49708 Y74.29232
G01 X136.54846 Y74.28355
G01 X136.64394 Y74.27088
G01 X136.70452 Y74.26791
G01 X136.77333 Y74.26791
G01 X136.83391 Y74.27088
G01 X136.92938 Y74.28355
G01 X136.99720 Y74.29595
G01 X137.01552 Y74.30024
G01 X137.02146 Y74.30164
G01 X137.14704 Y74.34223
G01 X137.20165 Y74.36242
G01 X137.21117 Y74.36745
G01 X137.34927 Y74.44172
G01 X137.36911 Y74.45279
G01 X137.40627 Y74.48053
G01 X137.51861 Y74.57032
G01 X137.52811 Y74.57931
G01 X137.57584 Y74.62905
G01 X137.64681 Y74.71068
G01 X137.67566 Y74.75000
G01 X137.69344 Y74.77537
G01 X137.71450 Y74.80692
G01 X137.74691 Y74.85163
G01 X137.79530 Y74.91320
G01 X137.81135 Y74.93298
G01 X137.86301 Y74.99442
G01 X137.94993 Y75.08470
G01 X137.98869 Y75.12021
G01 X137.99364 Y75.12488
G01 X137.99364 Y75.12490
G01 X138.01120 Y75.21322
G01 X138.02659 Y75.36928
G01 X138.02659 Y75.46534
G01 X138.02298 Y75.50187
G01 X137.94140 Y75.61454
G01 X137.89679 Y75.68663
G01 X137.88674 Y75.70329
G01 X137.84666 Y75.77172
G01 X137.81760 Y75.82648
G01 X137.79662 Y75.87045
G01 X137.79070 Y75.88251
G01 X137.78750 Y75.88891
G01 X137.78366 Y75.89668
G01 X137.76304 Y75.93918
G01 X137.75057 Y75.96483
G01 X137.71358 Y76.02724
G01 X137.67566 Y76.08464
G01 X137.64681 Y76.12396
G01 X137.57584 Y76.20560
G01 X137.52811 Y76.25533
G01 X137.51861 Y76.26432
G01 X137.40627 Y76.35411
G01 X137.36911 Y76.38185
G01 X137.34932 Y76.39290
G01 X137.21120 Y76.46719
G01 X137.19883 Y76.47370
G01 X137.14813 Y76.49625
G01 X137.13170 Y76.50379
G01 X137.06124 Y76.53727
G01 X137.00561 Y76.56661
G01 X136.93495 Y76.60760
G01 X136.86987 Y76.64908
G01 X136.79733 Y76.69948
G01 X136.79080 Y76.70405
G01 X136.79078 Y76.70405
G01 X136.78994 Y76.70466
G01 X136.78697 Y76.70496
G01 X136.69146 Y76.70496
G01 X136.69096 Y76.70458
G01 X136.69032 Y76.70415
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X136.78750 Y77.17847 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X136.78750 Y77.17847
G01 X136.76327 Y77.10783
G01 X136.74998 Y77.02343
G01 X136.74468 Y76.94649
G01 X136.74625 Y76.86110
G01 X136.76263 Y76.77725
G01 X136.79078 Y76.70405
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.94140 Y75.61454 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.94140 Y75.61454
G01 X138.02298 Y75.50184
G01 X138.02331 Y75.50141
G01 X138.02844 Y75.49943
G01 X138.10253 Y75.47799
G01 X138.18625 Y75.46151
G01 X138.27157 Y75.45980
G01 X138.35590 Y75.47291
G01 X138.43078 Y75.49135
G01 X138.46647 Y75.50352
G01 X138.47094 Y75.51050
G01 X138.47094 Y75.51053
G01 X138.55727 Y75.64530
G01 X138.57960 Y75.69026
G01 X138.61912 Y75.76046
G01 X138.66911 Y75.83930
G01 X138.68419 Y75.86211
G01 X138.74411 Y75.92203
G01 X138.81663 Y75.96587
G01 X138.90271 Y75.99234
G01 X138.92024 Y75.99437
G01 X138.96093 Y75.99554
G01 X142.16095 Y75.99554
G01 X142.20164 Y75.99437
G01 X142.21909 Y75.99234
G01 X142.30522 Y75.96587
G01 X142.36613 Y75.92988
G01 X142.37774 Y75.92203
G01 X142.43763 Y75.86211
G01 X142.48149 Y75.78957
G01 X142.50796 Y75.70347
G01 X142.50999 Y75.68599
G01 X142.51116 Y75.64530
G01 X142.51116 Y72.58084
G01 X142.51726 Y72.48859
G01 X142.52295 Y72.44528
G01 X142.52663 Y72.41127
G01 X142.54522 Y72.19174
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.47094 Y75.01071 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.47094 Y75.01071
G01 X138.47094 Y75.51050
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.98869 Y75.12021 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.98869 Y75.12021
G01 X137.99415 Y75.12539
G01 X138.01912 Y75.13059
G01 X138.10391 Y75.14078
G01 X138.18917 Y75.13608
G01 X138.27231 Y75.11665
G01 X138.34559 Y75.09262
G01 X138.42412 Y75.05902
G01 X138.45557 Y75.03849
G01 X138.47094 Y75.01071
G01 X138.52077 Y74.92066
G01 X138.55026 Y74.84352
G01 X138.59768 Y74.65384
G01 X138.60584 Y74.58467
G01 X138.61069 Y74.50225
G01 X138.61069 Y72.58084
G01 X138.60459 Y72.48859
G01 X138.59890 Y72.44528
G01 X138.59522 Y72.41127
G01 X138.57663 Y72.19174
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.66469 Y66.13633 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.66469 Y66.13633
G01 X139.66469 Y67.73635
G01 X139.66585 Y67.77704
G01 X139.66789 Y67.79449
G01 X139.69435 Y67.88060
G01 X139.73822 Y67.95314
G01 X139.79811 Y68.01303
G01 X139.87065 Y68.05690
G01 X139.95673 Y68.08336
G01 X139.97424 Y68.08540
G01 X140.01493 Y68.08656
G01 X141.61492 Y68.08656
G01 X141.65564 Y68.08540
G01 X141.67309 Y68.08336
G01 X141.75922 Y68.05687
G01 X141.80481 Y68.03074
G01 X141.83171 Y68.01306
G01 X141.89166 Y67.95314
G01 X141.93547 Y67.88065
G01 X141.96196 Y67.79449
G01 X141.96400 Y67.77704
G01 X141.96516 Y67.73635
G01 X141.96516 Y66.13633
G01 X141.96400 Y66.09561
G01 X141.96196 Y66.07816
G01 X141.93550 Y65.99205
G01 X141.89163 Y65.91951
G01 X141.83174 Y65.85962
G01 X141.75919 Y65.81575
G01 X141.67309 Y65.78929
G01 X141.65561 Y65.78725
G01 X141.61492 Y65.78606
G01 X140.01493 Y65.78606
G01 X139.97421 Y65.78725
G01 X139.95676 Y65.78929
G01 X139.87065 Y65.81575
G01 X139.79811 Y65.85962
G01 X139.73822 Y65.91949
G01 X139.69438 Y65.99200
G01 X139.66789 Y66.07816
G01 X139.66585 Y66.09561
G01 X139.66469 Y66.13633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52869 Y65.99731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52869 Y65.99731
G01 X143.52869 Y67.99731
G01 X143.52985 Y68.03803
G01 X143.53189 Y68.05550
G01 X143.55835 Y68.14161
G01 X143.60219 Y68.21412
G01 X143.66214 Y68.27404
G01 X143.73463 Y68.31788
G01 X143.82081 Y68.34437
G01 X143.83824 Y68.34641
G01 X143.87893 Y68.34757
G01 X145.87895 Y68.34757
G01 X145.91959 Y68.34641
G01 X145.93706 Y68.34435
G01 X146.02319 Y68.31788
G01 X146.09574 Y68.27404
G01 X146.15566 Y68.21412
G01 X146.19950 Y68.14161
G01 X146.22596 Y68.05550
G01 X146.22799 Y68.03803
G01 X146.22919 Y67.99731
G01 X146.22919 Y65.99731
G01 X146.22799 Y65.95662
G01 X146.22596 Y65.93915
G01 X146.19950 Y65.85304
G01 X146.15566 Y65.78052
G01 X146.09574 Y65.72061
G01 X146.02319 Y65.67676
G01 X145.93706 Y65.65030
G01 X145.91956 Y65.64824
G01 X145.87895 Y65.64707
G01 X143.87893 Y65.64707
G01 X143.83826 Y65.64824
G01 X143.82079 Y65.65030
G01 X143.73465 Y65.67676
G01 X143.66211 Y65.72061
G01 X143.60219 Y65.78052
G01 X143.56226 Y65.84573
G01 X143.55835 Y65.85307
G01 X143.53189 Y65.93915
G01 X143.52985 Y65.95662
G01 X143.52869 Y65.99731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y66.99731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y66.99731
G01 X151.02892 Y66.96287
G01 X151.04338 Y66.79602
G01 X151.04798 Y66.76777
G01 X151.06238 Y66.70033
G01 X151.08915 Y66.59950
G01 X151.11927 Y66.51275
G01 X151.14500 Y66.44895
G01 X151.16233 Y66.41146
G01 X151.23754 Y66.27610
G01 X151.26179 Y66.23569
G01 X151.27533 Y66.21842
G01 X151.38856 Y66.07844
G01 X151.39954 Y66.06678
G01 X151.44919 Y66.01895
G01 X151.53733 Y65.94202
G01 X151.60070 Y65.89454
G01 X151.65778 Y65.85604
G01 X151.70390 Y65.82810
G01 X151.83070 Y65.76371
G01 X151.88506 Y65.73897
G01 X151.89390 Y65.73620
G01 X152.07820 Y65.67981
G01 X152.08142 Y65.67908
G01 X152.14945 Y65.66719
G01 X152.27805 Y65.65119
G01 X152.34454 Y65.64791
G01 X152.41330 Y65.64791
G01 X152.47980 Y65.65119
G01 X152.60840 Y65.66719
G01 X152.67642 Y65.67908
G01 X152.67965 Y65.67981
G01 X152.86395 Y65.73620
G01 X152.87279 Y65.73897
G01 X152.92714 Y65.76371
G01 X153.05394 Y65.82810
G01 X153.10007 Y65.85604
G01 X153.15714 Y65.89454
G01 X153.22051 Y65.94202
G01 X153.30865 Y66.01895
G01 X153.35831 Y66.06678
G01 X153.36928 Y66.07844
G01 X153.48251 Y66.21842
G01 X153.49605 Y66.23569
G01 X153.52031 Y66.27610
G01 X153.59552 Y66.41146
G01 X153.61284 Y66.44895
G01 X153.63857 Y66.51275
G01 X153.66870 Y66.59950
G01 X153.69547 Y66.70033
G01 X153.70987 Y66.76777
G01 X153.71447 Y66.79602
G01 X153.72892 Y66.96287
G01 X153.73088 Y66.99259
G01 X153.73105 Y66.99739
G01 X153.72892 Y67.03178
G01 X153.71447 Y67.19863
G01 X153.70987 Y67.22688
G01 X153.69547 Y67.29431
G01 X153.66872 Y67.39510
G01 X153.63857 Y67.48189
G01 X153.61284 Y67.54570
G01 X153.61096 Y67.54976
G01 X153.59552 Y67.58324
G01 X153.52031 Y67.71854
G01 X153.49605 Y67.75896
G01 X153.48251 Y67.77623
G01 X153.36920 Y67.91628
G01 X153.35831 Y67.92787
G01 X153.30865 Y67.97572
G01 X153.22051 Y68.05263
G01 X153.15714 Y68.10010
G01 X153.10007 Y68.13861
G01 X153.05397 Y68.16652
G01 X152.92714 Y68.23094
G01 X152.87276 Y68.25568
G01 X152.86395 Y68.25845
G01 X152.67965 Y68.31483
G01 X152.67642 Y68.31557
G01 X152.60840 Y68.32746
G01 X152.47980 Y68.34346
G01 X152.41330 Y68.34674
G01 X152.34454 Y68.34674
G01 X152.27805 Y68.34346
G01 X152.14945 Y68.32746
G01 X152.08142 Y68.31557
G01 X152.07820 Y68.31483
G01 X151.89390 Y68.25845
G01 X151.88506 Y68.25568
G01 X151.83070 Y68.23094
G01 X151.70390 Y68.16655
G01 X151.65778 Y68.13861
G01 X151.60070 Y68.10010
G01 X151.53733 Y68.05263
G01 X151.44919 Y67.97569
G01 X151.39954 Y67.92787
G01 X151.38856 Y67.91621
G01 X151.27533 Y67.77623
G01 X151.26179 Y67.75896
G01 X151.23754 Y67.71854
G01 X151.16233 Y67.58319
G01 X151.14500 Y67.54570
G01 X151.11927 Y67.48189
G01 X151.08915 Y67.39515
G01 X151.06238 Y67.29431
G01 X151.04798 Y67.22688
G01 X151.04338 Y67.19863
G01 X151.02892 Y67.03178
G01 X151.02679 Y66.99731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.40052 Y68.90592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.40052 Y68.90592
G01 X156.40052 Y68.97473
G01 X156.40478 Y69.06129
G01 X156.42848 Y69.26744
G01 X156.43326 Y69.30165
G01 X156.44194 Y69.33513
G01 X156.49894 Y69.53469
G01 X156.52813 Y69.61628
G01 X156.55447 Y69.67988
G01 X156.59150 Y69.75816
G01 X156.69231 Y69.93957
G01 X156.70986 Y69.96939
G01 X156.73067 Y69.99695
G01 X156.81007 Y70.09700
G01 X156.85970 Y70.15951
G01 X156.91789 Y70.22372
G01 X156.96653 Y70.27236
G01 X157.03072 Y70.33055
G01 X157.19330 Y70.45958
G01 X157.22086 Y70.48039
G01 X157.25065 Y70.49794
G01 X157.43206 Y70.59875
G01 X157.51037 Y70.63578
G01 X157.57397 Y70.66212
G01 X157.65553 Y70.69131
G01 X157.85512 Y70.74831
G01 X157.88858 Y70.75697
G01 X157.92282 Y70.76177
G01 X158.12896 Y70.78547
G01 X158.21552 Y70.78973
G01 X158.24994 Y70.79057
G01 X159.24994 Y70.79057
G01 X159.28433 Y70.78973
G01 X159.37087 Y70.78547
G01 X159.57704 Y70.76177
G01 X159.61125 Y70.75697
G01 X159.64473 Y70.74831
G01 X159.84430 Y70.69131
G01 X159.92588 Y70.66212
G01 X159.98944 Y70.63578
G01 X160.06777 Y70.59875
G01 X160.24918 Y70.49794
G01 X160.27897 Y70.48041
G01 X160.30655 Y70.45958
G01 X160.46911 Y70.33058
G01 X160.53333 Y70.27236
G01 X160.58199 Y70.22369
G01 X160.64016 Y70.15951
G01 X160.76919 Y69.99695
G01 X160.78999 Y69.96936
G01 X160.80749 Y69.93962
G01 X160.90828 Y69.75827
G01 X160.94536 Y69.67988
G01 X160.97173 Y69.61625
G01 X161.00091 Y69.53472
G01 X161.05789 Y69.33510
G01 X161.06655 Y69.30168
G01 X161.07135 Y69.26746
G01 X161.09507 Y69.06124
G01 X161.09934 Y68.97475
G01 X161.09934 Y68.90589
G01 X161.09507 Y68.81941
G01 X161.07135 Y68.61318
G01 X161.06655 Y68.57897
G01 X161.05789 Y68.54554
G01 X161.00091 Y68.34595
G01 X160.97173 Y68.26442
G01 X160.94536 Y68.20079
G01 X160.93990 Y68.18923
G01 X160.90833 Y68.12248
G01 X160.80749 Y67.94105
G01 X160.78999 Y67.91130
G01 X160.76919 Y67.88369
G01 X160.64016 Y67.72113
G01 X160.58199 Y67.65695
G01 X160.53330 Y67.60826
G01 X160.46911 Y67.55009
G01 X160.30655 Y67.42106
G01 X160.27894 Y67.40026
G01 X160.24920 Y67.38276
G01 X160.06777 Y67.28192
G01 X159.98946 Y67.24486
G01 X159.92583 Y67.21852
G01 X159.84430 Y67.18933
G01 X159.64471 Y67.13236
G01 X159.61128 Y67.12370
G01 X159.57707 Y67.11890
G01 X159.37084 Y67.09518
G01 X159.28436 Y67.09091
G01 X159.24994 Y67.09007
G01 X158.24994 Y67.09007
G01 X158.21550 Y67.09091
G01 X158.12901 Y67.09518
G01 X157.92279 Y67.11890
G01 X157.88858 Y67.12370
G01 X157.85515 Y67.13236
G01 X157.72561 Y67.16934
G01 X157.65553 Y67.18933
G01 X157.57400 Y67.21852
G01 X157.51037 Y67.24488
G01 X157.43206 Y67.28192
G01 X157.25063 Y67.38276
G01 X157.22089 Y67.40026
G01 X157.19330 Y67.42106
G01 X157.03074 Y67.55009
G01 X156.96656 Y67.60826
G01 X156.91789 Y67.65692
G01 X156.85967 Y67.72113
G01 X156.73067 Y67.88369
G01 X156.70984 Y67.91128
G01 X156.69231 Y67.94107
G01 X156.63874 Y68.03749
G01 X156.59150 Y68.12248
G01 X156.55447 Y68.20081
G01 X156.52813 Y68.26436
G01 X156.49894 Y68.34595
G01 X156.44194 Y68.54552
G01 X156.43328 Y68.57899
G01 X156.42848 Y68.61321
G01 X156.40478 Y68.81938
G01 X156.40052 Y68.90592
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X157.15861 Y60.07833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X157.15861 Y60.07833
G01 X157.16046 Y60.04378
G01 X157.17999 Y59.79420
G01 X157.20196 Y59.63423
G01 X157.21466 Y59.56652
G01 X157.22734 Y59.51343
G01 X157.30953 Y59.24068
G01 X157.33445 Y59.17266
G01 X157.36125 Y59.10924
G01 X157.42365 Y58.97972
G01 X157.55388 Y58.74544
G01 X157.56221 Y58.73086
G01 X157.59287 Y58.68846
G01 X157.73615 Y58.50520
G01 X157.85459 Y58.37066
G01 X157.90262 Y58.32120
G01 X157.92950 Y58.29613
G01 X158.14870 Y58.11422
G01 X158.22142 Y58.06070
G01 X158.27877 Y58.02268
G01 X158.38697 Y57.95837
G01 X158.63991 Y57.82728
G01 X158.64087 Y57.82684
G01 X158.70524 Y57.80180
G01 X158.90902 Y57.73388
G01 X159.09927 Y57.68252
G01 X159.16668 Y57.66784
G01 X159.18535 Y57.66472
G01 X159.41286 Y57.64020
G01 X159.46851 Y57.63424
G01 X159.57651 Y57.62893
G01 X159.64537 Y57.62893
G01 X159.75327 Y57.63424
G01 X160.03653 Y57.66472
G01 X160.05517 Y57.66784
G01 X160.12258 Y57.68252
G01 X160.31283 Y57.73388
G01 X160.51661 Y57.80180
G01 X160.58098 Y57.82684
G01 X160.58194 Y57.82728
G01 X160.83487 Y57.95837
G01 X160.94308 Y58.02268
G01 X161.00043 Y58.06070
G01 X161.07315 Y58.11422
G01 X161.29235 Y58.29613
G01 X161.31923 Y58.32120
G01 X161.36726 Y58.37066
G01 X161.48570 Y58.50520
G01 X161.62898 Y58.68846
G01 X161.65964 Y58.73086
G01 X161.66797 Y58.74544
G01 X161.79825 Y58.97983
G01 X161.86060 Y59.10924
G01 X161.88740 Y59.17266
G01 X161.91232 Y59.24068
G01 X161.99449 Y59.51340
G01 X162.00719 Y59.56652
G01 X162.01989 Y59.63423
G01 X162.04183 Y59.79420
G01 X162.06139 Y60.04378
G01 X162.06324 Y60.07833
G01 X162.06139 Y60.11284
G01 X162.04183 Y60.36245
G01 X162.01989 Y60.52242
G01 X162.00719 Y60.59014
G01 X161.99446 Y60.64335
G01 X161.91232 Y60.91594
G01 X161.88740 Y60.98399
G01 X161.86060 Y61.04741
G01 X161.85171 Y61.06583
G01 X161.79822 Y61.17685
G01 X161.66797 Y61.41122
G01 X161.65964 Y61.42580
G01 X161.62898 Y61.46819
G01 X161.48570 Y61.65145
G01 X161.36726 Y61.78599
G01 X161.31923 Y61.83545
G01 X161.29235 Y61.86052
G01 X161.07315 Y62.04243
G01 X161.00043 Y62.09592
G01 X160.94308 Y62.13397
G01 X160.83485 Y62.19829
G01 X160.58194 Y62.32937
G01 X160.58098 Y62.32981
G01 X160.51661 Y62.35485
G01 X160.31283 Y62.42277
G01 X160.12258 Y62.47413
G01 X160.05517 Y62.48881
G01 X160.03650 Y62.49193
G01 X159.75327 Y62.52241
G01 X159.64537 Y62.52772
G01 X159.57651 Y62.52772
G01 X159.46856 Y62.52241
G01 X159.18535 Y62.49193
G01 X159.16668 Y62.48881
G01 X159.09927 Y62.47413
G01 X158.90902 Y62.42277
G01 X158.70524 Y62.35485
G01 X158.64087 Y62.32981
G01 X158.63991 Y62.32937
G01 X158.38697 Y62.19829
G01 X158.27877 Y62.13397
G01 X158.22142 Y62.09595
G01 X158.14870 Y62.04243
G01 X157.92950 Y61.86052
G01 X157.90262 Y61.83545
G01 X157.85459 Y61.78599
G01 X157.73615 Y61.65145
G01 X157.59287 Y61.46819
G01 X157.56221 Y61.42580
G01 X157.55388 Y61.41122
G01 X157.42360 Y61.17682
G01 X157.36125 Y61.04741
G01 X157.33445 Y60.98399
G01 X157.30953 Y60.91597
G01 X157.22734 Y60.64322
G01 X157.21466 Y60.59014
G01 X157.20196 Y60.52242
G01 X157.17999 Y60.36245
G01 X157.16046 Y60.11284
G01 X157.15861 Y60.07833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y51.74639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y51.74639
G01 X156.37677 Y51.65988
G01 X156.40049 Y51.45368
G01 X156.40529 Y51.41947
G01 X156.41395 Y51.38601
G01 X156.47095 Y51.18645
G01 X156.50014 Y51.10486
G01 X156.52648 Y51.04131
G01 X156.56348 Y50.96300
G01 X156.57946 Y50.93430
G01 X156.66432 Y50.78157
G01 X156.68185 Y50.75178
G01 X156.70265 Y50.72419
G01 X156.83168 Y50.56163
G01 X156.88985 Y50.49745
G01 X156.93854 Y50.44875
G01 X157.00273 Y50.39059
G01 X157.16529 Y50.26156
G01 X157.19287 Y50.24075
G01 X157.22264 Y50.22325
G01 X157.39229 Y50.12897
G01 X157.40415 Y50.12239
G01 X157.48238 Y50.08536
G01 X157.54601 Y50.05902
G01 X157.62754 Y50.02983
G01 X157.69762 Y50.00984
G01 X157.82713 Y49.97286
G01 X157.86059 Y49.96420
G01 X157.89477 Y49.95940
G01 X158.10100 Y49.93567
G01 X158.18748 Y49.93141
G01 X158.22190 Y49.93057
G01 X159.22192 Y49.93057
G01 X159.25637 Y49.93141
G01 X159.34285 Y49.93567
G01 X159.54908 Y49.95940
G01 X159.58326 Y49.96417
G01 X159.61672 Y49.97286
G01 X159.81631 Y50.02983
G01 X159.89784 Y50.05902
G01 X159.96147 Y50.08536
G01 X160.03978 Y50.12241
G01 X160.22121 Y50.22325
G01 X160.25095 Y50.24075
G01 X160.27856 Y50.26156
G01 X160.44112 Y50.39059
G01 X160.50531 Y50.44875
G01 X160.55400 Y50.49745
G01 X160.61217 Y50.56163
G01 X160.74120 Y50.72419
G01 X160.76200 Y50.75180
G01 X160.77953 Y50.78157
G01 X160.88034 Y50.96298
G01 X160.91737 Y51.04131
G01 X160.94371 Y51.10486
G01 X160.97290 Y51.18645
G01 X161.02990 Y51.38601
G01 X161.03856 Y51.41947
G01 X161.04336 Y51.45368
G01 X161.06708 Y51.65988
G01 X161.07132 Y51.74639
G01 X161.07132 Y51.81525
G01 X161.06708 Y51.90179
G01 X161.04336 Y52.10796
G01 X161.03856 Y52.14220
G01 X161.02990 Y52.17562
G01 X160.97290 Y52.37522
G01 X160.94371 Y52.45678
G01 X160.91737 Y52.52035
G01 X160.88034 Y52.59869
G01 X160.77953 Y52.78009
G01 X160.76200 Y52.80986
G01 X160.74120 Y52.83747
G01 X160.61217 Y53.00003
G01 X160.55400 Y53.06422
G01 X160.50531 Y53.11291
G01 X160.44115 Y53.17107
G01 X160.27856 Y53.30011
G01 X160.25098 Y53.32091
G01 X160.22118 Y53.33844
G01 X160.03975 Y53.43925
G01 X159.96144 Y53.47628
G01 X159.89789 Y53.50262
G01 X159.81631 Y53.53181
G01 X159.61674 Y53.58880
G01 X159.58329 Y53.59746
G01 X159.54905 Y53.60227
G01 X159.34288 Y53.62596
G01 X159.25634 Y53.63023
G01 X159.22192 Y53.63107
G01 X158.22190 Y53.63107
G01 X158.18751 Y53.63023
G01 X158.10097 Y53.62596
G01 X157.89480 Y53.60227
G01 X157.86056 Y53.59746
G01 X157.82711 Y53.58880
G01 X157.62754 Y53.53181
G01 X157.54596 Y53.50262
G01 X157.48240 Y53.47628
G01 X157.40410 Y53.43925
G01 X157.22266 Y53.33844
G01 X157.19284 Y53.32088
G01 X157.17225 Y53.30554
G01 X157.16529 Y53.30011
G01 X157.00273 Y53.17107
G01 X156.93854 Y53.11291
G01 X156.88985 Y53.06422
G01 X156.83171 Y53.00006
G01 X156.75990 Y52.90958
G01 X156.70265 Y52.83747
G01 X156.68182 Y52.80986
G01 X156.66432 Y52.78009
G01 X156.56351 Y52.59869
G01 X156.52648 Y52.52035
G01 X156.50014 Y52.45678
G01 X156.47095 Y52.37522
G01 X156.41395 Y52.17562
G01 X156.40529 Y52.14217
G01 X156.40049 Y52.10796
G01 X156.37677 Y51.90179
G01 X156.37253 Y51.81525
G01 X156.37253 Y51.74639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y46.66639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y46.66639
G01 X156.37677 Y46.57988
G01 X156.40049 Y46.37368
G01 X156.40529 Y46.33947
G01 X156.41395 Y46.30601
G01 X156.47095 Y46.10645
G01 X156.50014 Y46.02486
G01 X156.52648 Y45.96131
G01 X156.56351 Y45.88298
G01 X156.66432 Y45.70157
G01 X156.68185 Y45.67180
G01 X156.70265 Y45.64419
G01 X156.83168 Y45.48163
G01 X156.88985 Y45.41745
G01 X156.93854 Y45.36875
G01 X157.00273 Y45.31059
G01 X157.16529 Y45.18156
G01 X157.19287 Y45.16075
G01 X157.22264 Y45.14325
G01 X157.30935 Y45.09504
G01 X157.40410 Y45.04239
G01 X157.48238 Y45.00536
G01 X157.54601 Y44.97902
G01 X157.62751 Y44.94986
G01 X157.68736 Y44.93276
G01 X157.82713 Y44.89286
G01 X157.86059 Y44.88417
G01 X157.89477 Y44.87940
G01 X158.10100 Y44.85567
G01 X158.18748 Y44.85141
G01 X158.22190 Y44.85057
G01 X159.22192 Y44.85057
G01 X159.25637 Y44.85141
G01 X159.34285 Y44.85567
G01 X159.54908 Y44.87940
G01 X159.58326 Y44.88417
G01 X159.61672 Y44.89286
G01 X159.81631 Y44.94983
G01 X159.89784 Y44.97902
G01 X159.96147 Y45.00536
G01 X160.03978 Y45.04241
G01 X160.22121 Y45.14325
G01 X160.25095 Y45.16075
G01 X160.27856 Y45.18156
G01 X160.44112 Y45.31059
G01 X160.50531 Y45.36875
G01 X160.55400 Y45.41745
G01 X160.61217 Y45.48163
G01 X160.74120 Y45.64419
G01 X160.76200 Y45.67180
G01 X160.77953 Y45.70157
G01 X160.88034 Y45.88298
G01 X160.91737 Y45.96131
G01 X160.94371 Y46.02486
G01 X160.97290 Y46.10645
G01 X161.02990 Y46.30601
G01 X161.03856 Y46.33947
G01 X161.04336 Y46.37368
G01 X161.06708 Y46.57988
G01 X161.07132 Y46.66639
G01 X161.07132 Y46.73525
G01 X161.06708 Y46.82179
G01 X161.04336 Y47.02796
G01 X161.03856 Y47.06220
G01 X161.02990 Y47.09562
G01 X160.98385 Y47.25694
G01 X160.97290 Y47.29519
G01 X160.94371 Y47.37678
G01 X160.91737 Y47.44035
G01 X160.88039 Y47.51858
G01 X160.77953 Y47.70009
G01 X160.76200 Y47.72989
G01 X160.74120 Y47.75747
G01 X160.61217 Y47.92003
G01 X160.55400 Y47.98422
G01 X160.50531 Y48.03291
G01 X160.44115 Y48.09107
G01 X160.27856 Y48.22011
G01 X160.25098 Y48.24088
G01 X160.22118 Y48.25844
G01 X160.13686 Y48.30527
G01 X160.03973 Y48.35927
G01 X159.96144 Y48.39628
G01 X159.89789 Y48.42262
G01 X159.81631 Y48.45181
G01 X159.61674 Y48.50880
G01 X159.58329 Y48.51746
G01 X159.54905 Y48.52227
G01 X159.34288 Y48.54596
G01 X159.25634 Y48.55023
G01 X159.22192 Y48.55107
G01 X158.22190 Y48.55107
G01 X158.18751 Y48.55023
G01 X158.10097 Y48.54596
G01 X157.89480 Y48.52227
G01 X157.86056 Y48.51746
G01 X157.82711 Y48.50880
G01 X157.62754 Y48.45181
G01 X157.54596 Y48.42262
G01 X157.48240 Y48.39628
G01 X157.40410 Y48.35925
G01 X157.22266 Y48.25844
G01 X157.19287 Y48.24091
G01 X157.16529 Y48.22011
G01 X157.00270 Y48.09107
G01 X156.93854 Y48.03291
G01 X156.88985 Y47.98422
G01 X156.83168 Y47.92006
G01 X156.73427 Y47.79727
G01 X156.70265 Y47.75747
G01 X156.68182 Y47.72986
G01 X156.66432 Y47.70009
G01 X156.56351 Y47.51869
G01 X156.52648 Y47.44035
G01 X156.50014 Y47.37678
G01 X156.47095 Y47.29522
G01 X156.41395 Y47.09562
G01 X156.40529 Y47.06217
G01 X156.40049 Y47.02796
G01 X156.37677 Y46.82179
G01 X156.37253 Y46.73525
G01 X156.37253 Y46.66639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y41.58639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y41.58639
G01 X156.37677 Y41.49988
G01 X156.40049 Y41.29368
G01 X156.40529 Y41.25947
G01 X156.41395 Y41.22601
G01 X156.47095 Y41.02645
G01 X156.50014 Y40.94486
G01 X156.52648 Y40.88131
G01 X156.56351 Y40.80298
G01 X156.66432 Y40.62157
G01 X156.68185 Y40.59180
G01 X156.70265 Y40.56419
G01 X156.83168 Y40.40163
G01 X156.88985 Y40.33745
G01 X156.93854 Y40.28875
G01 X157.00273 Y40.23059
G01 X157.16529 Y40.10156
G01 X157.19290 Y40.08075
G01 X157.22264 Y40.06325
G01 X157.40407 Y39.96241
G01 X157.48238 Y39.92536
G01 X157.54601 Y39.89902
G01 X157.62754 Y39.86983
G01 X157.69762 Y39.84984
G01 X157.82713 Y39.81286
G01 X157.86059 Y39.80420
G01 X157.89477 Y39.79940
G01 X158.10100 Y39.77567
G01 X158.18748 Y39.77141
G01 X158.22190 Y39.77057
G01 X159.22192 Y39.77057
G01 X159.25637 Y39.77141
G01 X159.34285 Y39.77567
G01 X159.54908 Y39.79940
G01 X159.58326 Y39.80417
G01 X159.61672 Y39.81286
G01 X159.81631 Y39.86983
G01 X159.89784 Y39.89902
G01 X159.96147 Y39.92536
G01 X160.03978 Y39.96241
G01 X160.22121 Y40.06325
G01 X160.25095 Y40.08075
G01 X160.27856 Y40.10156
G01 X160.44112 Y40.23059
G01 X160.50531 Y40.28875
G01 X160.55400 Y40.33745
G01 X160.61217 Y40.40163
G01 X160.74120 Y40.56419
G01 X160.76200 Y40.59180
G01 X160.77953 Y40.62157
G01 X160.88034 Y40.80298
G01 X160.91737 Y40.88131
G01 X160.94371 Y40.94486
G01 X160.97290 Y41.02645
G01 X160.99375 Y41.09945
G01 X161.02990 Y41.22601
G01 X161.03856 Y41.25947
G01 X161.04336 Y41.29368
G01 X161.06708 Y41.49988
G01 X161.07132 Y41.58639
G01 X161.07132 Y41.65525
G01 X161.06708 Y41.74179
G01 X161.04336 Y41.94796
G01 X161.03856 Y41.98220
G01 X161.02990 Y42.01562
G01 X160.97292 Y42.21519
G01 X160.94371 Y42.29678
G01 X160.91737 Y42.36035
G01 X160.88037 Y42.43861
G01 X160.87976 Y42.43973
G01 X160.77953 Y42.62009
G01 X160.76200 Y42.64989
G01 X160.74120 Y42.67747
G01 X160.61217 Y42.84003
G01 X160.55400 Y42.90422
G01 X160.50531 Y42.95291
G01 X160.44115 Y43.01107
G01 X160.27856 Y43.14011
G01 X160.25095 Y43.16091
G01 X160.22118 Y43.17844
G01 X160.17925 Y43.20173
G01 X160.03975 Y43.27925
G01 X159.96144 Y43.31628
G01 X159.89789 Y43.34262
G01 X159.81631 Y43.37181
G01 X159.61674 Y43.42880
G01 X159.58329 Y43.43746
G01 X159.54905 Y43.44227
G01 X159.34288 Y43.46596
G01 X159.25634 Y43.47023
G01 X159.22192 Y43.47107
G01 X158.22190 Y43.47107
G01 X158.18751 Y43.47023
G01 X158.10097 Y43.46596
G01 X157.89480 Y43.44227
G01 X157.86056 Y43.43746
G01 X157.82711 Y43.42880
G01 X157.62754 Y43.37181
G01 X157.54596 Y43.34262
G01 X157.48240 Y43.31628
G01 X157.40410 Y43.27925
G01 X157.22266 Y43.17844
G01 X157.19287 Y43.16091
G01 X157.16529 Y43.14011
G01 X157.00270 Y43.01107
G01 X156.93854 Y42.95291
G01 X156.88985 Y42.90422
G01 X156.83168 Y42.84006
G01 X156.75454 Y42.74285
G01 X156.70265 Y42.67747
G01 X156.68182 Y42.64986
G01 X156.66432 Y42.62009
G01 X156.56351 Y42.43869
G01 X156.52648 Y42.36035
G01 X156.50014 Y42.29678
G01 X156.47095 Y42.21522
G01 X156.41395 Y42.01562
G01 X156.40529 Y41.98217
G01 X156.40049 Y41.94796
G01 X156.37677 Y41.74179
G01 X156.37253 Y41.65525
G01 X156.37253 Y41.58639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y37.68383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y37.68383
G01 X151.02892 Y37.71827
G01 X151.04338 Y37.88513
G01 X151.04798 Y37.91337
G01 X151.06238 Y37.98078
G01 X151.08915 Y38.08167
G01 X151.11927 Y38.16839
G01 X151.14503 Y38.23224
G01 X151.16233 Y38.26971
G01 X151.23754 Y38.40506
G01 X151.26182 Y38.44550
G01 X151.27530 Y38.46272
G01 X151.38859 Y38.60273
G01 X151.39954 Y38.61436
G01 X151.44919 Y38.66221
G01 X151.53733 Y38.73912
G01 X151.60070 Y38.78660
G01 X151.65778 Y38.82510
G01 X151.70388 Y38.85304
G01 X151.83070 Y38.91743
G01 X151.88506 Y38.94217
G01 X151.89390 Y38.94494
G01 X152.07820 Y39.00133
G01 X152.08142 Y39.00207
G01 X152.14945 Y39.01395
G01 X152.27805 Y39.02995
G01 X152.34454 Y39.03323
G01 X152.41330 Y39.03323
G01 X152.47980 Y39.02995
G01 X152.60840 Y39.01395
G01 X152.67642 Y39.00207
G01 X152.67965 Y39.00133
G01 X152.86395 Y38.94494
G01 X152.87276 Y38.94220
G01 X152.92714 Y38.91743
G01 X153.05397 Y38.85302
G01 X153.10007 Y38.82510
G01 X153.15714 Y38.78660
G01 X153.22049 Y38.73915
G01 X153.28038 Y38.68688
G01 X153.30865 Y38.66219
G01 X153.35831 Y38.61436
G01 X153.36928 Y38.60273
G01 X153.43415 Y38.52251
G01 X153.48251 Y38.46272
G01 X153.49605 Y38.44545
G01 X153.52031 Y38.40506
G01 X153.56865 Y38.31809
G01 X153.59552 Y38.26973
G01 X153.61282 Y38.23224
G01 X153.63857 Y38.16839
G01 X153.66872 Y38.08165
G01 X153.67073 Y38.07403
G01 X153.69547 Y37.98078
G01 X153.70987 Y37.91337
G01 X153.71447 Y37.88513
G01 X153.72892 Y37.71827
G01 X153.73108 Y37.68383
G01 X153.72892 Y37.64936
G01 X153.71762 Y37.51878
G01 X153.71447 Y37.48251
G01 X153.70987 Y37.45427
G01 X153.69549 Y37.38688
G01 X153.66870 Y37.28599
G01 X153.63857 Y37.19925
G01 X153.61284 Y37.13545
G01 X153.59552 Y37.09795
G01 X153.52031 Y36.96260
G01 X153.49605 Y36.92219
G01 X153.48251 Y36.90491
G01 X153.36928 Y36.76494
G01 X153.35831 Y36.75328
G01 X153.30865 Y36.70545
G01 X153.22051 Y36.62851
G01 X153.15714 Y36.58104
G01 X153.10007 Y36.54253
G01 X153.05397 Y36.51459
G01 X152.92714 Y36.45020
G01 X152.87281 Y36.42546
G01 X152.86390 Y36.42270
G01 X152.67962 Y36.36631
G01 X152.67637 Y36.36557
G01 X152.60845 Y36.35371
G01 X152.47980 Y36.33768
G01 X152.41335 Y36.33441
G01 X152.34449 Y36.33441
G01 X152.27805 Y36.33768
G01 X152.14940 Y36.35371
G01 X152.08148 Y36.36557
G01 X152.07820 Y36.36633
G01 X151.89395 Y36.42270
G01 X151.88506 Y36.42546
G01 X151.83070 Y36.45020
G01 X151.70388 Y36.51459
G01 X151.65778 Y36.54253
G01 X151.60070 Y36.58104
G01 X151.53733 Y36.62851
G01 X151.44919 Y36.70545
G01 X151.39954 Y36.75328
G01 X151.38856 Y36.76494
G01 X151.27533 Y36.90491
G01 X151.26179 Y36.92219
G01 X151.23754 Y36.96260
G01 X151.16233 Y37.09793
G01 X151.14500 Y37.13545
G01 X151.11927 Y37.19928
G01 X151.08915 Y37.28599
G01 X151.06238 Y37.38688
G01 X151.04798 Y37.45427
G01 X151.04338 Y37.48254
G01 X151.02892 Y37.64936
G01 X151.02679 Y37.68383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y41.99734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y41.99734
G01 X151.02892 Y42.03178
G01 X151.04338 Y42.19863
G01 X151.04798 Y42.22688
G01 X151.06238 Y42.29431
G01 X151.08915 Y42.39515
G01 X151.11927 Y42.48189
G01 X151.14500 Y42.54570
G01 X151.16233 Y42.58319
G01 X151.23754 Y42.71854
G01 X151.26179 Y42.75895
G01 X151.27533 Y42.77623
G01 X151.38856 Y42.91621
G01 X151.39954 Y42.92786
G01 X151.44919 Y42.97569
G01 X151.53733 Y43.05263
G01 X151.60070 Y43.10010
G01 X151.65778 Y43.13861
G01 X151.70390 Y43.16655
G01 X151.83070 Y43.23094
G01 X151.88506 Y43.25568
G01 X151.89390 Y43.25845
G01 X152.07820 Y43.31483
G01 X152.08142 Y43.31557
G01 X152.14945 Y43.32746
G01 X152.27805 Y43.34346
G01 X152.34454 Y43.34674
G01 X152.41330 Y43.34674
G01 X152.47980 Y43.34346
G01 X152.60840 Y43.32746
G01 X152.67642 Y43.31557
G01 X152.67965 Y43.31483
G01 X152.86395 Y43.25845
G01 X152.87276 Y43.25568
G01 X152.92714 Y43.23094
G01 X153.05397 Y43.16652
G01 X153.10007 Y43.13861
G01 X153.15714 Y43.10010
G01 X153.22051 Y43.05265
G01 X153.30865 Y42.97569
G01 X153.35447 Y42.93190
G01 X153.35831 Y42.92786
G01 X153.36928 Y42.91621
G01 X153.48251 Y42.77623
G01 X153.49605 Y42.75895
G01 X153.52031 Y42.71854
G01 X153.59552 Y42.58321
G01 X153.61284 Y42.54570
G01 X153.63857 Y42.48189
G01 X153.66870 Y42.39518
G01 X153.69547 Y42.29431
G01 X153.70987 Y42.22688
G01 X153.71447 Y42.19861
G01 X153.72892 Y42.03178
G01 X153.73108 Y41.99734
G01 X153.72892 Y41.96287
G01 X153.71444 Y41.79594
G01 X153.70987 Y41.76777
G01 X153.69547 Y41.70033
G01 X153.66870 Y41.59950
G01 X153.63857 Y41.51275
G01 X153.61284 Y41.44895
G01 X153.59552 Y41.41146
G01 X153.52031 Y41.27610
G01 X153.49605 Y41.23569
G01 X153.48251 Y41.21842
G01 X153.36928 Y41.07844
G01 X153.35831 Y41.06678
G01 X153.30865 Y41.01895
G01 X153.22051 Y40.94202
G01 X153.15714 Y40.89454
G01 X153.10007 Y40.85604
G01 X153.05394 Y40.82810
G01 X152.92714 Y40.76371
G01 X152.87279 Y40.73897
G01 X152.86390 Y40.73617
G01 X152.67962 Y40.67981
G01 X152.67637 Y40.67908
G01 X152.60845 Y40.66721
G01 X152.47980 Y40.65119
G01 X152.41335 Y40.64791
G01 X152.34449 Y40.64791
G01 X152.27805 Y40.65119
G01 X152.14940 Y40.66721
G01 X152.08148 Y40.67908
G01 X152.07822 Y40.67981
G01 X151.89395 Y40.73617
G01 X151.88506 Y40.73897
G01 X151.83070 Y40.76371
G01 X151.70390 Y40.82810
G01 X151.65778 Y40.85604
G01 X151.60070 Y40.89454
G01 X151.53733 Y40.94202
G01 X151.44919 Y41.01895
G01 X151.39954 Y41.06678
G01 X151.38856 Y41.07844
G01 X151.27533 Y41.21842
G01 X151.26179 Y41.23569
G01 X151.23754 Y41.27610
G01 X151.16233 Y41.41146
G01 X151.14500 Y41.44895
G01 X151.11927 Y41.51275
G01 X151.08915 Y41.59950
G01 X151.06238 Y41.70033
G01 X151.04798 Y41.76777
G01 X151.04338 Y41.79602
G01 X151.02892 Y41.96287
G01 X151.02679 Y41.99734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y46.99733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y46.99733
G01 X151.02892 Y47.03177
G01 X151.04338 Y47.19862
G01 X151.04798 Y47.22687
G01 X151.06238 Y47.29428
G01 X151.08915 Y47.39517
G01 X151.11927 Y47.48188
G01 X151.14503 Y47.54574
G01 X151.16233 Y47.58320
G01 X151.23754 Y47.71856
G01 X151.26179 Y47.75897
G01 X151.27530 Y47.77622
G01 X151.38859 Y47.91622
G01 X151.39954 Y47.92785
G01 X151.44917 Y47.97568
G01 X151.53733 Y48.05264
G01 X151.60068 Y48.10009
G01 X151.65778 Y48.13862
G01 X151.70388 Y48.16656
G01 X151.83070 Y48.23095
G01 X151.88503 Y48.25569
G01 X151.89395 Y48.25846
G01 X152.07820 Y48.31485
G01 X152.08148 Y48.31556
G01 X152.14940 Y48.32745
G01 X152.27805 Y48.34347
G01 X152.34449 Y48.34673
G01 X152.41335 Y48.34673
G01 X152.47980 Y48.34347
G01 X152.60845 Y48.32745
G01 X152.67637 Y48.31559
G01 X152.67965 Y48.31482
G01 X152.86390 Y48.25846
G01 X152.87279 Y48.25569
G01 X152.92714 Y48.23095
G01 X153.05397 Y48.16654
G01 X153.10007 Y48.13862
G01 X153.15717 Y48.10009
G01 X153.22049 Y48.05264
G01 X153.30868 Y47.97568
G01 X153.35447 Y47.93189
G01 X153.35831 Y47.92785
G01 X153.36931 Y47.91617
G01 X153.48254 Y47.77622
G01 X153.49605 Y47.75897
G01 X153.52031 Y47.71856
G01 X153.56318 Y47.64142
G01 X153.59552 Y47.58323
G01 X153.61282 Y47.54574
G01 X153.63857 Y47.48188
G01 X153.66870 Y47.39517
G01 X153.69547 Y47.29428
G01 X153.70987 Y47.22687
G01 X153.71447 Y47.19859
G01 X153.72460 Y47.08183
G01 X153.72892 Y47.03177
G01 X153.73108 Y46.99733
G01 X153.72892 Y46.96286
G01 X153.71447 Y46.79601
G01 X153.70987 Y46.76776
G01 X153.69547 Y46.70037
G01 X153.66870 Y46.59949
G01 X153.63857 Y46.51277
G01 X153.61282 Y46.44891
G01 X153.59552 Y46.41145
G01 X153.52031 Y46.27609
G01 X153.49605 Y46.23568
G01 X153.48254 Y46.21843
G01 X153.36926 Y46.07843
G01 X153.35831 Y46.06680
G01 X153.30868 Y46.01897
G01 X153.22051 Y45.94203
G01 X153.15717 Y45.89456
G01 X153.10007 Y45.85603
G01 X153.05397 Y45.82811
G01 X152.92714 Y45.76372
G01 X152.87279 Y45.73896
G01 X152.86390 Y45.73619
G01 X152.67965 Y45.67980
G01 X152.67637 Y45.67909
G01 X152.60845 Y45.66720
G01 X152.47980 Y45.65118
G01 X152.41335 Y45.64793
G01 X152.34449 Y45.64793
G01 X152.27805 Y45.65118
G01 X152.14940 Y45.66720
G01 X152.08148 Y45.67909
G01 X152.07820 Y45.67980
G01 X151.89395 Y45.73619
G01 X151.88506 Y45.73896
G01 X151.83070 Y45.76372
G01 X151.70388 Y45.82811
G01 X151.65778 Y45.85603
G01 X151.60068 Y45.89456
G01 X151.53733 Y45.94203
G01 X151.44917 Y46.01897
G01 X151.39954 Y46.06680
G01 X151.38859 Y46.07843
G01 X151.27530 Y46.21843
G01 X151.26182 Y46.23568
G01 X151.23754 Y46.27609
G01 X151.18567 Y46.36941
G01 X151.16233 Y46.41145
G01 X151.14503 Y46.44891
G01 X151.11927 Y46.51277
G01 X151.08915 Y46.59949
G01 X151.06238 Y46.70037
G01 X151.04798 Y46.76776
G01 X151.04338 Y46.79603
G01 X151.02892 Y46.96286
G01 X151.02679 Y46.99733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y51.99732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y51.99732
G01 X151.02892 Y52.03178
G01 X151.04338 Y52.19864
G01 X151.04798 Y52.22688
G01 X151.06238 Y52.29432
G01 X151.08915 Y52.39516
G01 X151.11927 Y52.48190
G01 X151.14500 Y52.54570
G01 X151.16233 Y52.58319
G01 X151.23754 Y52.71855
G01 X151.26179 Y52.75896
G01 X151.27533 Y52.77623
G01 X151.38856 Y52.91621
G01 X151.39954 Y52.92787
G01 X151.44919 Y52.97570
G01 X151.53733 Y53.05263
G01 X151.60070 Y53.10011
G01 X151.65778 Y53.13861
G01 X151.70388 Y53.16655
G01 X151.83070 Y53.23094
G01 X151.88503 Y53.25568
G01 X151.89395 Y53.25845
G01 X152.07822 Y53.31484
G01 X152.08148 Y53.31558
G01 X152.14940 Y53.32744
G01 X152.27805 Y53.34346
G01 X152.34449 Y53.34674
G01 X152.41335 Y53.34674
G01 X152.47980 Y53.34346
G01 X152.60845 Y53.32744
G01 X152.67637 Y53.31558
G01 X152.67965 Y53.31484
G01 X152.86390 Y53.25848
G01 X152.87276 Y53.25568
G01 X152.92714 Y53.23094
G01 X153.05397 Y53.16655
G01 X153.10007 Y53.13861
G01 X153.15714 Y53.10011
G01 X153.22054 Y53.05263
G01 X153.30657 Y52.97753
G01 X153.30865 Y52.97572
G01 X153.35831 Y52.92787
G01 X153.36923 Y52.91626
G01 X153.37863 Y52.90465
G01 X153.48251 Y52.77623
G01 X153.49605 Y52.75896
G01 X153.52031 Y52.71855
G01 X153.59552 Y52.58324
G01 X153.61284 Y52.54570
G01 X153.63857 Y52.48190
G01 X153.66870 Y52.39516
G01 X153.69547 Y52.29432
G01 X153.70987 Y52.22688
G01 X153.71447 Y52.19861
G01 X153.72892 Y52.03178
G01 X153.73105 Y51.99737
G01 X153.72892 Y51.96287
G01 X153.72793 Y51.95134
G01 X153.71701 Y51.82523
G01 X153.71447 Y51.79599
G01 X153.70987 Y51.76778
G01 X153.69547 Y51.70034
G01 X153.66870 Y51.59948
G01 X153.63857 Y51.51276
G01 X153.61284 Y51.44895
G01 X153.59552 Y51.41144
G01 X153.52031 Y51.27611
G01 X153.49605 Y51.23570
G01 X153.48251 Y51.21842
G01 X153.36926 Y51.07842
G01 X153.35831 Y51.06679
G01 X153.30865 Y51.01893
G01 X153.22051 Y50.94202
G01 X153.15714 Y50.89455
G01 X153.10007 Y50.85604
G01 X153.05397 Y50.82810
G01 X152.92714 Y50.76371
G01 X152.87279 Y50.73897
G01 X152.86395 Y50.73621
G01 X152.67965 Y50.67982
G01 X152.67642 Y50.67908
G01 X152.60840 Y50.66719
G01 X152.47980 Y50.65119
G01 X152.41330 Y50.64792
G01 X152.34454 Y50.64792
G01 X152.27805 Y50.65119
G01 X152.14945 Y50.66719
G01 X152.08142 Y50.67908
G01 X152.07820 Y50.67982
G01 X151.89390 Y50.73621
G01 X151.88506 Y50.73897
G01 X151.83070 Y50.76371
G01 X151.70388 Y50.82810
G01 X151.65778 Y50.85604
G01 X151.60070 Y50.89455
G01 X151.53733 Y50.94200
G01 X151.44919 Y51.01896
G01 X151.39954 Y51.06679
G01 X151.38859 Y51.07842
G01 X151.27533 Y51.21842
G01 X151.26179 Y51.23570
G01 X151.23754 Y51.27611
G01 X151.16233 Y51.41146
G01 X151.14500 Y51.44895
G01 X151.11927 Y51.51276
G01 X151.08915 Y51.59950
G01 X151.06238 Y51.70034
G01 X151.04798 Y51.76778
G01 X151.04338 Y51.79602
G01 X151.02892 Y51.96287
G01 X151.02679 Y51.99732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y41.99734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y41.99734
G01 X143.52891 Y41.96282
G01 X143.54339 Y41.79604
G01 X143.54799 Y41.76772
G01 X143.56237 Y41.70038
G01 X143.58916 Y41.59947
G01 X143.61926 Y41.51280
G01 X143.64502 Y41.44895
G01 X143.66232 Y41.41146
G01 X143.73752 Y41.27610
G01 X143.76181 Y41.23569
G01 X143.77535 Y41.21839
G01 X143.88858 Y41.07844
G01 X143.89958 Y41.06676
G01 X143.94921 Y41.01895
G01 X144.03735 Y40.94202
G01 X144.10072 Y40.89454
G01 X144.15777 Y40.85604
G01 X144.20389 Y40.82810
G01 X144.33069 Y40.76373
G01 X144.38505 Y40.73897
G01 X144.39394 Y40.73617
G01 X144.55708 Y40.68629
G01 X144.57821 Y40.67981
G01 X144.58149 Y40.67908
G01 X144.64941 Y40.66721
G01 X144.77804 Y40.65119
G01 X144.84451 Y40.64791
G01 X144.91337 Y40.64791
G01 X144.97981 Y40.65119
G01 X145.10844 Y40.66721
G01 X145.17636 Y40.67908
G01 X145.17964 Y40.67981
G01 X145.36391 Y40.73617
G01 X145.37280 Y40.73897
G01 X145.42716 Y40.76373
G01 X145.55395 Y40.82810
G01 X145.60008 Y40.85604
G01 X145.65713 Y40.89454
G01 X145.72050 Y40.94202
G01 X145.80864 Y41.01895
G01 X145.85827 Y41.06676
G01 X145.86927 Y41.07844
G01 X145.98250 Y41.21839
G01 X145.99604 Y41.23569
G01 X146.02032 Y41.27610
G01 X146.09553 Y41.41146
G01 X146.11283 Y41.44895
G01 X146.13859 Y41.51280
G01 X146.16869 Y41.59947
G01 X146.19548 Y41.70038
G01 X146.20986 Y41.76772
G01 X146.21448 Y41.79609
G01 X146.22893 Y41.96282
G01 X146.23107 Y41.99731
G01 X146.22893 Y42.03183
G01 X146.21446 Y42.19861
G01 X146.20986 Y42.22693
G01 X146.19548 Y42.29426
G01 X146.16869 Y42.39518
G01 X146.13859 Y42.48184
G01 X146.11283 Y42.54570
G01 X146.09553 Y42.58321
G01 X146.02032 Y42.71854
G01 X145.99604 Y42.75898
G01 X145.98250 Y42.77625
G01 X145.93026 Y42.84084
G01 X145.86925 Y42.91626
G01 X145.85446 Y42.93193
G01 X145.80864 Y42.97572
G01 X145.72050 Y43.05265
G01 X145.65713 Y43.10010
G01 X145.60008 Y43.13861
G01 X145.55398 Y43.16652
G01 X145.42716 Y43.23091
G01 X145.37280 Y43.25568
G01 X145.36394 Y43.25845
G01 X145.17964 Y43.31483
G01 X145.17638 Y43.31557
G01 X145.10839 Y43.32746
G01 X144.97981 Y43.34346
G01 X144.91334 Y43.34674
G01 X144.84456 Y43.34674
G01 X144.77804 Y43.34346
G01 X144.64946 Y43.32746
G01 X144.58147 Y43.31557
G01 X144.57819 Y43.31483
G01 X144.39391 Y43.25845
G01 X144.38505 Y43.25568
G01 X144.33067 Y43.23094
G01 X144.20389 Y43.16655
G01 X144.15777 Y43.13861
G01 X144.10072 Y43.10010
G01 X144.03735 Y43.05263
G01 X143.94921 Y42.97569
G01 X143.89958 Y42.92789
G01 X143.88860 Y42.91623
G01 X143.77535 Y42.77625
G01 X143.76181 Y42.75895
G01 X143.73752 Y42.71854
G01 X143.66232 Y42.58319
G01 X143.64502 Y42.54570
G01 X143.61926 Y42.48184
G01 X143.58916 Y42.39518
G01 X143.56237 Y42.29426
G01 X143.54799 Y42.22693
G01 X143.54339 Y42.19861
G01 X143.52891 Y42.03183
G01 X143.52678 Y41.99734
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.02691 Y45.12430 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.02691 Y45.12430
G01 X140.09095 Y45.18831
G01 X140.27792 Y45.56230
G01 X140.27792 Y47.16235
G01 X140.09095 Y47.53634
G01 X140.02691 Y47.60035
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y46.99733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y46.99733
G01 X143.52891 Y46.96281
G01 X143.54339 Y46.79606
G01 X143.54799 Y46.76773
G01 X143.56237 Y46.70040
G01 X143.58916 Y46.59949
G01 X143.61926 Y46.51279
G01 X143.64502 Y46.44891
G01 X143.66234 Y46.41140
G01 X143.68568 Y46.36939
G01 X143.73752 Y46.27612
G01 X143.76181 Y46.23568
G01 X143.77535 Y46.21841
G01 X143.88860 Y46.07843
G01 X143.89958 Y46.06677
G01 X143.94918 Y46.01897
G01 X144.03735 Y45.94201
G01 X144.10069 Y45.89456
G01 X144.15777 Y45.85605
G01 X144.20387 Y45.82811
G01 X144.33069 Y45.76372
G01 X144.38507 Y45.73896
G01 X144.39396 Y45.73619
G01 X144.57821 Y45.67983
G01 X144.58149 Y45.67907
G01 X144.64941 Y45.66720
G01 X144.77804 Y45.65118
G01 X144.84451 Y45.64793
G01 X144.91337 Y45.64793
G01 X144.97981 Y45.65118
G01 X145.10844 Y45.66720
G01 X145.17636 Y45.67907
G01 X145.17964 Y45.67983
G01 X145.36389 Y45.73619
G01 X145.37278 Y45.73896
G01 X145.42716 Y45.76372
G01 X145.55398 Y45.82811
G01 X145.60008 Y45.85605
G01 X145.65716 Y45.89456
G01 X145.72050 Y45.94201
G01 X145.80867 Y46.01897
G01 X145.85827 Y46.06677
G01 X145.86925 Y46.07843
G01 X145.98250 Y46.21841
G01 X145.99604 Y46.23568
G01 X146.02032 Y46.27612
G01 X146.09553 Y46.41142
G01 X146.11283 Y46.44891
G01 X146.13859 Y46.51279
G01 X146.16869 Y46.59949
G01 X146.19548 Y46.70040
G01 X146.20986 Y46.76773
G01 X146.21446 Y46.79603
G01 X146.22893 Y46.96281
G01 X146.23107 Y46.99733
G01 X146.22893 Y47.03182
G01 X146.21446 Y47.19859
G01 X146.20986 Y47.22692
G01 X146.19548 Y47.29425
G01 X146.16869 Y47.39517
G01 X146.13859 Y47.48186
G01 X146.11283 Y47.54574
G01 X146.09551 Y47.58323
G01 X146.02032 Y47.71853
G01 X145.99604 Y47.75897
G01 X145.98250 Y47.77624
G01 X145.86927 Y47.91622
G01 X145.85827 Y47.92788
G01 X145.80867 Y47.97568
G01 X145.72050 Y48.05264
G01 X145.65716 Y48.10009
G01 X145.60008 Y48.13862
G01 X145.55398 Y48.16654
G01 X145.42716 Y48.23093
G01 X145.37280 Y48.25569
G01 X145.36389 Y48.25846
G01 X145.17964 Y48.31482
G01 X145.17636 Y48.31559
G01 X145.10844 Y48.32745
G01 X144.97981 Y48.34347
G01 X144.91337 Y48.34673
G01 X144.84451 Y48.34673
G01 X144.77804 Y48.34347
G01 X144.64941 Y48.32745
G01 X144.58149 Y48.31559
G01 X144.57821 Y48.31482
G01 X144.39396 Y48.25849
G01 X144.38502 Y48.25569
G01 X144.33069 Y48.23093
G01 X144.20387 Y48.16654
G01 X144.15777 Y48.13862
G01 X144.10069 Y48.10009
G01 X144.03735 Y48.05264
G01 X143.94918 Y47.97568
G01 X143.89958 Y47.92788
G01 X143.88860 Y47.91622
G01 X143.77535 Y47.77624
G01 X143.76181 Y47.75897
G01 X143.73752 Y47.71853
G01 X143.66232 Y47.58323
G01 X143.64502 Y47.54574
G01 X143.61926 Y47.48186
G01 X143.58916 Y47.39517
G01 X143.56237 Y47.29425
G01 X143.54799 Y47.22692
G01 X143.54339 Y47.19859
G01 X143.52891 Y47.03182
G01 X143.52678 Y46.99733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y51.99732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y51.99732
G01 X143.52891 Y51.96282
G01 X143.54339 Y51.79605
G01 X143.54799 Y51.76772
G01 X143.56237 Y51.70039
G01 X143.58916 Y51.59948
G01 X143.61926 Y51.51281
G01 X143.64502 Y51.44895
G01 X143.66234 Y51.41141
G01 X143.71134 Y51.32320
G01 X143.73752 Y51.27611
G01 X143.76178 Y51.23572
G01 X143.77535 Y51.21840
G01 X143.88860 Y51.07842
G01 X143.89958 Y51.06676
G01 X143.94921 Y51.01896
G01 X144.03737 Y50.94200
G01 X144.10072 Y50.89455
G01 X144.15777 Y50.85604
G01 X144.20387 Y50.82813
G01 X144.33069 Y50.76374
G01 X144.38505 Y50.73897
G01 X144.39391 Y50.73621
G01 X144.57821 Y50.67982
G01 X144.58147 Y50.67908
G01 X144.64946 Y50.66719
G01 X144.77804 Y50.65119
G01 X144.84456 Y50.64792
G01 X144.91334 Y50.64792
G01 X144.97981 Y50.65119
G01 X145.10839 Y50.66719
G01 X145.17638 Y50.67908
G01 X145.17964 Y50.67982
G01 X145.36394 Y50.73621
G01 X145.37280 Y50.73897
G01 X145.42716 Y50.76374
G01 X145.55398 Y50.82813
G01 X145.60008 Y50.85604
G01 X145.65713 Y50.89455
G01 X145.72050 Y50.94200
G01 X145.80864 Y51.01893
G01 X145.85827 Y51.06676
G01 X145.86925 Y51.07842
G01 X145.98250 Y51.21840
G01 X145.99604 Y51.23567
G01 X146.02032 Y51.27611
G01 X146.09553 Y51.41144
G01 X146.11283 Y51.44895
G01 X146.13859 Y51.51281
G01 X146.16869 Y51.59948
G01 X146.19548 Y51.70039
G01 X146.20986 Y51.76772
G01 X146.21446 Y51.79607
G01 X146.21702 Y51.82533
G01 X146.22893 Y51.96282
G01 X146.23107 Y51.99732
G01 X146.22893 Y52.03183
G01 X146.21446 Y52.19861
G01 X146.20986 Y52.22693
G01 X146.19548 Y52.29427
G01 X146.16869 Y52.39518
G01 X146.13859 Y52.48185
G01 X146.11283 Y52.54570
G01 X146.09546 Y52.58337
G01 X146.06368 Y52.64054
G01 X146.02032 Y52.71855
G01 X145.99604 Y52.75896
G01 X145.98250 Y52.77626
G01 X145.87872 Y52.90455
G01 X145.86927 Y52.91621
G01 X145.85827 Y52.92790
G01 X145.80864 Y52.97572
G01 X145.80656 Y52.97753
G01 X145.72050 Y53.05263
G01 X145.65713 Y53.10011
G01 X145.60008 Y53.13861
G01 X145.55395 Y53.16655
G01 X145.42716 Y53.23092
G01 X145.37280 Y53.25568
G01 X145.36391 Y53.25848
G01 X145.17964 Y53.31484
G01 X145.17636 Y53.31558
G01 X145.10844 Y53.32744
G01 X144.97981 Y53.34346
G01 X144.91337 Y53.34674
G01 X144.84451 Y53.34674
G01 X144.77804 Y53.34346
G01 X144.64941 Y53.32744
G01 X144.58149 Y53.31558
G01 X144.57821 Y53.31484
G01 X144.39396 Y53.25848
G01 X144.38502 Y53.25568
G01 X144.33069 Y53.23092
G01 X144.20387 Y53.16653
G01 X144.15777 Y53.13861
G01 X144.10072 Y53.10011
G01 X144.03735 Y53.05263
G01 X143.94921 Y52.97570
G01 X143.89958 Y52.92790
G01 X143.88860 Y52.91624
G01 X143.77535 Y52.77626
G01 X143.76181 Y52.75896
G01 X143.73752 Y52.71855
G01 X143.66232 Y52.58319
G01 X143.64502 Y52.54570
G01 X143.61926 Y52.48185
G01 X143.58916 Y52.39518
G01 X143.56237 Y52.29427
G01 X143.54799 Y52.22693
G01 X143.54339 Y52.19861
G01 X143.52891 Y52.03183
G01 X143.52678 Y51.99732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.97586 Y55.07328 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.97586 Y55.07328
G01 X139.97490 Y55.07394
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.97551 Y55.07399 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.97551 Y55.07399
G01 X139.97586 Y55.07328
G01 X140.01856 Y54.99256
G01 X140.09273 Y54.83574
G01 X140.12183 Y54.76566
G01 X140.17794 Y54.60884
G01 X140.19455 Y54.55423
G01 X140.23382 Y54.39741
G01 X140.24269 Y54.35299
G01 X140.26595 Y54.19614
G01 X140.26976 Y54.15756
G01 X140.27749 Y54.00071
G01 X140.27749 Y53.96391
G01 X140.26976 Y53.80709
G01 X140.26595 Y53.76851
G01 X140.24269 Y53.61166
G01 X140.23382 Y53.56724
G01 X140.19455 Y53.41042
G01 X140.17794 Y53.35581
G01 X140.12183 Y53.19899
G01 X140.09273 Y53.12891
G01 X140.01856 Y52.97209
G01 X139.97563 Y52.89119
G01 X139.97134 Y52.88832
G01 X139.96433 Y52.88873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.97492 Y52.88642 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.97492 Y52.88642
G01 X139.97495 Y52.88987
G01 X139.97563 Y52.89119
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.50981 Y47.08882 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.50981 Y47.08882
G01 X132.41375 Y47.15244
G01 X132.41207 Y47.15359
G01 X132.41070 Y47.15618
G01 X132.37392 Y47.24492
G01 X132.32840 Y47.39501
G01 X132.31194 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.26556 Y47.12915 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.26556 Y47.12915
G01 X132.26805 Y47.12994
G01 X132.35129 Y47.14919
G01 X132.41375 Y47.15244
G01 X132.41377 Y47.15247
G01 X132.50981 Y47.08882
G01 X132.55451 Y47.05521
G01 X132.57791 Y47.03822
G01 X132.62218 Y47.00713
G01 X132.70628 Y46.93873
G01 X132.74049 Y46.90649
G01 X132.74339 Y46.90373
G01 X132.78055 Y46.86829
G01 X132.79350 Y46.85625
G01 X132.83493 Y46.81869
G01 X132.91484 Y46.75694
G01 X132.97146 Y46.71749
G01 X132.98047 Y46.71185
G01 X133.11011 Y46.64419
G01 X133.14108 Y46.62900
G01 X133.17369 Y46.61785
G01 X133.31321 Y46.57403
G01 X133.32355 Y46.57165
G01 X133.39147 Y46.55953
G01 X133.49167 Y46.54665
G01 X133.54753 Y46.54391
G01 X133.61634 Y46.54391
G01 X133.67217 Y46.54665
G01 X133.77237 Y46.55953
G01 X133.84026 Y46.57165
G01 X133.85065 Y46.57403
G01 X133.99015 Y46.61785
G01 X134.02279 Y46.62900
G01 X134.05377 Y46.64421
G01 X134.18337 Y46.71185
G01 X134.19241 Y46.71752
G01 X134.24897 Y46.75691
G01 X134.32891 Y46.81869
G01 X134.37033 Y46.85623
G01 X134.41903 Y46.90492
G01 X134.44587 Y46.93454
G01 X134.48768 Y47.05143
G01 X134.50572 Y47.11066
G01 X134.54499 Y47.26748
G01 X134.55471 Y47.31625
G01 X134.57798 Y47.47307
G01 X134.58222 Y47.51602
G01 X134.58992 Y47.67284
G01 X134.59043 Y47.69331
G01 X134.59043 Y48.49331
G01 X134.58992 Y48.51381
G01 X134.58222 Y48.67063
G01 X134.57798 Y48.71358
G01 X134.56406 Y48.80738
G01 X134.53066 Y48.86308
G01 X134.50683 Y48.89877
G01 X134.41242 Y49.02613
G01 X134.38921 Y49.05440
G01 X134.28377 Y49.17073
G01 X134.25934 Y49.19516
G01 X134.14300 Y49.30060
G01 X134.11473 Y49.32379
G01 X133.98740 Y49.41822
G01 X133.95167 Y49.44210
G01 X133.81298 Y49.52521
G01 X133.76488 Y49.55086
G01 X133.61430 Y49.62209
G01 X133.56457 Y49.64337
G01 X133.54753 Y49.64274
G01 X133.49167 Y49.63999
G01 X133.39147 Y49.62711
G01 X133.32363 Y49.61500
G01 X133.31319 Y49.61261
G01 X133.17377 Y49.56882
G01 X133.14108 Y49.55767
G01 X133.11009 Y49.54243
G01 X132.98047 Y49.47479
G01 X132.97143 Y49.46913
G01 X132.91484 Y49.42971
G01 X132.83490 Y49.36793
G01 X132.79348 Y49.33039
G01 X132.74484 Y49.28175
G01 X132.70346 Y49.23608
G01 X132.65766 Y49.18602
G01 X132.63803 Y49.16651
G01 X132.60376 Y49.13006
G01 X132.58886 Y49.11307
G01 X132.46724 Y49.00027
G01 X132.44141 Y48.98056
G01 X132.38845 Y48.93728
G01 X132.37237 Y48.92328
G01 X132.36701 Y48.91891
G01 X132.32840 Y48.79163
G01 X132.31194 Y48.70880
G01 X132.31194 Y47.47777
G01 X132.29546 Y47.39501
G01 X132.28192 Y47.35039
G01 X132.28192 Y47.31932
G01 X132.27958 Y47.27132
G01 X132.26556 Y47.12915
G01 X132.26247 Y47.12529
G01 X132.20864 Y47.06319
G01 X132.19330 Y47.04686
G01 X132.09599 Y46.92273
G01 X132.07273 Y46.88643
G01 X132.05561 Y46.86093
G01 X132.02856 Y46.82242
G01 X131.98078 Y46.74404
G01 X131.97616 Y46.73667
G01 X131.95208 Y46.70073
G01 X131.93676 Y46.68010
G01 X131.87854 Y46.60477
G01 X131.84367 Y46.56629
G01 X131.81992 Y46.54134
G01 X129.33893 Y44.06032
G01 X129.31398 Y44.03657
G01 X129.27550 Y44.00170
G01 X129.20204 Y43.94496
G01 X129.20014 Y43.94351
G01 X129.19290 Y43.93797
G01 X129.13471 Y43.92070
G01 X128.98769 Y43.88387
G01 X128.93075 Y43.87252
G01 X128.78373 Y43.85070
G01 X128.73255 Y43.84564
G01 X128.58554 Y43.83843
G01 X128.56095 Y43.83782
G01 X117.15693 Y43.83782
G01 X117.13232 Y43.83843
G01 X116.98528 Y43.84564
G01 X116.93410 Y43.85070
G01 X116.78708 Y43.87252
G01 X116.73014 Y43.88387
G01 X116.58312 Y43.92070
G01 X116.52496 Y43.93797
G01 X116.51764 Y43.94353
G01 X116.44238 Y44.00170
G01 X116.40382 Y44.03663
G01 X116.37891 Y44.06035
G01 X115.02392 Y45.41536
G01 X115.00019 Y45.44028
G01 X114.96529 Y45.47879
G01 X114.90710 Y45.55407
G01 X114.89651 Y45.56819
G01 X114.86768 Y45.61066
G01 X114.86308 Y45.61800
G01 X114.79905 Y45.74069
G01 X114.78386 Y45.77162
G01 X114.77271 Y45.80426
G01 X114.73126 Y45.93629
G01 X114.72930 Y45.94475
G01 X114.71716 Y46.01264
G01 X114.70507 Y46.10703
G01 X114.70251 Y46.15892
G01 X114.70167 Y46.19334
G01 X114.70167 Y47.27817
G01 X114.69951 Y47.33329
G01 X114.69659 Y47.37040
G01 X114.69445 Y47.37970
G01 X114.68282 Y47.42374
G01 X114.68026 Y47.43499
G01 X114.66811 Y47.50286
G01 X114.65526 Y47.60309
G01 X114.65252 Y47.65892
G01 X114.65168 Y47.69331
G01 X114.65168 Y47.92054
G01 X114.64840 Y47.98828
G01 X114.64289 Y48.04543
G01 X114.60611 Y48.21551
G01 X114.58020 Y48.29265
G01 X114.51193 Y48.43850
G01 X114.51193 Y48.49331
G01 X114.51429 Y48.54134
G01 X114.52966 Y48.69742
G01 X114.54840 Y48.79163
G01 X114.59392 Y48.94170
G01 X114.63070 Y49.03044
G01 X114.70461 Y49.16875
G01 X114.75798 Y49.24863
G01 X114.85747 Y49.36986
G01 X114.92539 Y49.43778
G01 X115.04662 Y49.53727
G01 X115.12651 Y49.59064
G01 X115.26481 Y49.66455
G01 X115.26621 Y49.66514
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X115.06245 Y50.02892 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X115.06245 Y50.02892
G01 X114.12112 Y49.08757
G01 X114.13159 Y48.98134
G01 X114.13159 Y48.88528
G01 X114.11620 Y48.72922
G01 X114.09748 Y48.63499
G01 X114.07147 Y48.54929
G01 X114.11221 Y48.55437
G01 X114.19758 Y48.55752
G01 X114.28219 Y48.54581
G01 X114.36349 Y48.51957
G01 X114.43454 Y48.48958
G01 X114.50566 Y48.45193
G01 X114.51193 Y48.43852
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X116.99214 Y48.93639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X116.99214 Y48.93639
G01 X117.01731 Y48.91670
G01 X117.04776 Y48.91350
G01 X117.12701 Y48.91891
G01 X117.13237 Y48.92328
G01 X117.14845 Y48.93728
G01 X117.20141 Y48.98056
G01 X117.22724 Y49.00027
G01 X117.34886 Y49.11307
G01 X117.36376 Y49.13006
G01 X117.39803 Y49.16651
G01 X117.41766 Y49.18602
G01 X117.46346 Y49.23608
G01 X117.50484 Y49.28175
G01 X117.55348 Y49.33039
G01 X117.59490 Y49.36793
G01 X117.67484 Y49.42971
G01 X117.73143 Y49.46913
G01 X117.74047 Y49.47479
G01 X117.87009 Y49.54243
G01 X117.90108 Y49.55767
G01 X117.93377 Y49.56882
G01 X118.07319 Y49.61261
G01 X118.08363 Y49.61500
G01 X118.15147 Y49.62711
G01 X118.25167 Y49.63999
G01 X118.30753 Y49.64274
G01 X118.37634 Y49.64274
G01 X118.43217 Y49.63999
G01 X118.53237 Y49.62711
G01 X118.60021 Y49.61500
G01 X118.61065 Y49.61261
G01 X118.75010 Y49.56882
G01 X118.78279 Y49.55767
G01 X118.81380 Y49.54243
G01 X118.94337 Y49.47479
G01 X118.95243 Y49.46910
G01 X119.00897 Y49.42973
G01 X119.08891 Y49.36796
G01 X119.13033 Y49.33042
G01 X119.17903 Y49.28173
G01 X119.22038 Y49.23608
G01 X119.24039 Y49.21304
G01 X119.27174 Y49.17845
G01 X119.28413 Y49.16511
G01 X119.33422 Y49.11259
G01 X119.38380 Y49.06496
G01 X119.44547 Y49.01048
G01 X119.45706 Y49.00045
G01 X119.53214 Y48.93639
G01 X119.55759 Y48.91647
G01 X119.59546 Y48.79163
G01 X119.61194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.53214 Y48.93639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.53214 Y48.93639
G01 X119.55731 Y48.91670
G01 X119.58776 Y48.91350
G01 X119.66701 Y48.91891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X121.99893 Y49.13192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X121.99893 Y49.13192
G01 X122.05319 Y49.03044
G01 X122.08994 Y48.94170
G01 X122.13546 Y48.79163
G01 X122.15192 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.15192 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.15192 Y47.47777
G01 X122.16840 Y47.39501
G01 X122.21392 Y47.24492
G01 X122.25070 Y47.15618
G01 X122.32461 Y47.01787
G01 X122.37798 Y46.93802
G01 X122.47747 Y46.81678
G01 X122.54539 Y46.74886
G01 X122.66662 Y46.64937
G01 X122.74651 Y46.59601
G01 X122.88481 Y46.52207
G01 X122.97356 Y46.48531
G01 X123.12362 Y46.43980
G01 X123.21783 Y46.42105
G01 X123.37391 Y46.40568
G01 X123.46998 Y46.40568
G01 X123.62603 Y46.42105
G01 X123.72024 Y46.43980
G01 X123.87033 Y46.48531
G01 X123.95908 Y46.52207
G01 X124.09738 Y46.59601
G01 X124.17724 Y46.64937
G01 X124.29847 Y46.74886
G01 X124.36639 Y46.81678
G01 X124.44694 Y46.91490
G01 X124.46588 Y46.93802
G01 X124.51925 Y47.01787
G01 X124.59319 Y47.15618
G01 X124.62994 Y47.24492
G01 X124.67546 Y47.39501
G01 X124.69194 Y47.47777
G01 X124.69194 Y48.70880
G01 X124.70840 Y48.79163
G01 X124.75392 Y48.94170
G01 X124.79070 Y49.03044
G01 X124.84455 Y49.13120
G01 X124.89012 Y49.15518
G01 X124.97454 Y49.20220
G01 X125.05788 Y49.25506
G01 X125.11079 Y49.29326
G01 X125.12263 Y49.30164
G01 X125.17010 Y49.33453
G01 X125.19979 Y49.35625
G01 X125.29484 Y49.42971
G01 X125.35143 Y49.46913
G01 X125.36047 Y49.47479
G01 X125.49009 Y49.54243
G01 X125.52108 Y49.55767
G01 X125.55377 Y49.56882
G01 X125.69319 Y49.61261
G01 X125.70363 Y49.61500
G01 X125.77147 Y49.62711
G01 X125.87167 Y49.63999
G01 X125.92753 Y49.64274
G01 X125.99634 Y49.64274
G01 X126.05217 Y49.63999
G01 X126.15237 Y49.62711
G01 X126.22021 Y49.61500
G01 X126.23065 Y49.61261
G01 X126.37010 Y49.56882
G01 X126.40279 Y49.55767
G01 X126.43380 Y49.54243
G01 X126.56337 Y49.47479
G01 X126.57243 Y49.46910
G01 X126.62897 Y49.42973
G01 X126.70891 Y49.36796
G01 X126.75033 Y49.33042
G01 X126.79903 Y49.28173
G01 X126.84038 Y49.23608
G01 X126.86039 Y49.21304
G01 X126.89174 Y49.17845
G01 X126.90413 Y49.16511
G01 X126.95422 Y49.11259
G01 X127.00380 Y49.06496
G01 X127.06547 Y49.01048
G01 X127.07706 Y49.00045
G01 X127.15214 Y48.93639
G01 X127.17759 Y48.91647
G01 X127.21546 Y48.79163
G01 X127.23192 Y48.70880
G01 X127.23192 Y47.47777
G01 X127.21546 Y47.39501
G01 X127.16994 Y47.24492
G01 X127.13319 Y47.15618
G01 X127.05925 Y47.01787
G01 X127.00588 Y46.93802
G01 X126.98694 Y46.91490
G01 X126.90639 Y46.81678
G01 X126.83847 Y46.74886
G01 X126.71724 Y46.64937
G01 X126.63738 Y46.59601
G01 X126.49908 Y46.52207
G01 X126.41033 Y46.48531
G01 X126.26024 Y46.43980
G01 X126.16603 Y46.42105
G01 X126.00998 Y46.40568
G01 X125.91391 Y46.40568
G01 X125.75783 Y46.42105
G01 X125.66362 Y46.43980
G01 X125.51356 Y46.48531
G01 X125.42481 Y46.52207
G01 X125.28651 Y46.59601
G01 X125.20662 Y46.64937
G01 X125.08539 Y46.74886
G01 X125.01747 Y46.81678
G01 X124.91798 Y46.93802
G01 X124.86461 Y47.01787
G01 X124.79070 Y47.15618
G01 X124.75392 Y47.24492
G01 X124.70840 Y47.39501
G01 X124.69194 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.69194 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.69194 Y48.70880
G01 X124.67546 Y48.79163
G01 X124.62994 Y48.94170
G01 X124.59319 Y49.03044
G01 X124.51925 Y49.16875
G01 X124.46588 Y49.24863
G01 X124.36639 Y49.36986
G01 X124.29847 Y49.43778
G01 X124.26241 Y49.46737
G01 X124.26246 Y49.49958
G01 X124.28753 Y49.48033
G01 X124.43170 Y49.33618
G01 X124.43327 Y49.33778
G01 X124.48234 Y49.28802
G01 X124.53662 Y49.24523
G01 X124.53995 Y49.24261
G01 X124.60950 Y49.19679
G01 X124.68580 Y49.16341
G01 X124.76667 Y49.14345
G01 X124.84285 Y49.13138
G01 X124.84455 Y49.13120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.23192 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.23192 Y47.47777
G01 X127.24840 Y47.39501
G01 X127.29392 Y47.24492
G01 X127.33070 Y47.15618
G01 X127.40461 Y47.01787
G01 X127.45798 Y46.93802
G01 X127.55747 Y46.81678
G01 X127.62539 Y46.74886
G01 X127.74662 Y46.64937
G01 X127.82651 Y46.59601
G01 X127.96481 Y46.52207
G01 X128.05356 Y46.48531
G01 X128.20362 Y46.43980
G01 X128.29783 Y46.42105
G01 X128.38175 Y46.41277
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X134.42192 Y41.84775 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X134.42192 Y41.84775
G01 X134.42192 Y41.87996
G01 X134.44753 Y41.86033
G01 X134.56896 Y41.73892
G01 X134.67348 Y41.60270
G01 X134.75934 Y41.45398
G01 X134.81760 Y41.31334
G01 X134.79248 Y41.31334
G01 X134.78994 Y41.32170
G01 X134.75319 Y41.41044
G01 X134.67925 Y41.54875
G01 X134.62588 Y41.62863
G01 X134.52639 Y41.74986
G01 X134.45847 Y41.81778
G01 X134.42192 Y41.84775
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.15893 Y41.51192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.15893 Y41.51192
G01 X132.21319 Y41.41044
G01 X132.24994 Y41.32170
G01 X132.29546 Y41.17163
G01 X132.31194 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.31194 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.31194 Y39.85777
G01 X132.29546 Y39.77501
G01 X132.24994 Y39.62492
G01 X132.21319 Y39.53618
G01 X132.13925 Y39.39787
G01 X132.08588 Y39.31802
G01 X131.98639 Y39.19678
G01 X131.92439 Y39.13478
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.15693 Y39.13841 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.15693 Y39.13841
G01 X130.13135 Y39.13590
G01 X130.03943 Y39.10801
G01 X129.95470 Y39.06272
G01 X129.88045 Y39.00179
G01 X129.81952 Y38.92754
G01 X129.77423 Y38.84283
G01 X129.74634 Y38.75091
G01 X129.73694 Y38.65530
G01 X129.73692 Y38.16534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.14802 Y38.96031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.14802 Y38.96031
G01 X129.17738 Y38.97601
G01 X129.25724 Y39.02937
G01 X129.37847 Y39.12886
G01 X129.44639 Y39.19678
G01 X129.54588 Y39.31802
G01 X129.59925 Y39.39787
G01 X129.67319 Y39.53618
G01 X129.70994 Y39.62492
G01 X129.75546 Y39.77501
G01 X129.77194 Y39.85777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.77194 Y41.08880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.77194 Y41.08880
G01 X129.78840 Y41.17163
G01 X129.82701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.69214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.69214 Y41.31639
G01 X129.71731 Y41.29670
G01 X129.74776 Y41.29350
G01 X129.82701 Y41.29891
G01 X129.83237 Y41.30328
G01 X129.84845 Y41.31728
G01 X129.90141 Y41.36056
G01 X129.92724 Y41.38027
G01 X130.04886 Y41.49307
G01 X130.06376 Y41.51006
G01 X130.09803 Y41.54651
G01 X130.11766 Y41.56602
G01 X130.16346 Y41.61608
G01 X130.20484 Y41.66175
G01 X130.25348 Y41.71039
G01 X130.28007 Y41.73447
G01 X130.40105 Y41.77778
G01 X130.45998 Y41.79571
G01 X130.61682 Y41.83498
G01 X130.66534 Y41.84466
G01 X130.82216 Y41.86792
G01 X130.86475 Y41.87214
G01 X131.02160 Y41.87983
G01 X131.06226 Y41.87983
G01 X131.21908 Y41.87214
G01 X131.26165 Y41.86792
G01 X131.41850 Y41.84466
G01 X131.46706 Y41.83498
G01 X131.62388 Y41.79568
G01 X131.68276 Y41.77778
G01 X131.80864 Y41.73274
G01 X131.83374 Y41.71453
G01 X131.87715 Y41.68446
G01 X131.89297 Y41.67318
G01 X131.93836 Y41.63996
G01 X132.02929 Y41.58217
G01 X132.11428 Y41.53539
G01 X132.14319 Y41.51999
G01 X132.15893 Y41.51192
G01 X132.22099 Y41.52009
G01 X132.30432 Y41.53859
G01 X132.38319 Y41.57125
G01 X132.42414 Y41.59734
G01 X132.51707 Y41.59734
G01 X132.50732 Y41.58273
G01 X132.48461 Y41.54875
G01 X132.41070 Y41.41044
G01 X132.37392 Y41.32170
G01 X132.32840 Y41.17163
G01 X132.31194 Y41.08880
G01 X132.31194 Y39.85777
G01 X132.32840 Y39.77501
G01 X132.37392 Y39.62492
G01 X132.41070 Y39.53618
G01 X132.48461 Y39.39787
G01 X132.53798 Y39.31802
G01 X132.63747 Y39.19678
G01 X132.70539 Y39.12886
G01 X132.74146 Y39.09927
G01 X132.74123 Y38.97885
G01 X132.71913 Y38.98274
G01 X132.63371 Y38.98274
G01 X132.56036 Y38.96981
G01 X132.54959 Y38.96790
G01 X132.47509 Y38.94794
G01 X132.39482 Y38.91873
G01 X132.32086 Y38.87603
G01 X132.27867 Y38.84062
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X134.42192 Y39.06666 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X134.42192 Y39.06666
G01 X134.42192 Y39.09884
G01 X134.45847 Y39.12886
G01 X134.52639 Y39.19678
G01 X134.62588 Y39.31802
G01 X134.67925 Y39.39787
G01 X134.75319 Y39.53618
G01 X134.78994 Y39.62492
G01 X134.79248 Y39.63333
G01 X134.81760 Y39.63333
G01 X134.75936 Y39.49272
G01 X134.67348 Y39.34398
G01 X134.56894 Y39.20770
G01 X134.44753 Y39.08632
G01 X134.42192 Y39.06666
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.06426 Y35.13758 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.06426 Y35.13758
G01 X139.25623 Y35.32961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.00754 Y35.32295 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.00754 Y35.32295
G01 X139.16438 Y35.32295
G01 X139.21241 Y35.32529
G01 X139.25623 Y35.32961
G01 X139.37393 Y35.38528
G01 X139.45219 Y35.42704
G01 X139.59953 Y35.51536
G01 X139.66133 Y35.55658
G01 X139.79661 Y35.65694
G01 X139.84774 Y35.69890
G01 X139.97137 Y35.81091
G01 X140.01640 Y35.85595
G01 X140.12844 Y35.97957
G01 X140.13179 Y35.98330
G01 X140.14939 Y36.04195
G01 X140.19113 Y36.20857
G01 X140.20164 Y36.26125
G01 X140.22636 Y36.42788
G01 X140.23093 Y36.47418
G01 X140.23911 Y36.64081
G01 X140.23911 Y36.68508
G01 X140.23093 Y36.85170
G01 X140.22636 Y36.89803
G01 X140.20164 Y37.06466
G01 X140.19113 Y37.11733
G01 X140.14939 Y37.28396
G01 X140.13001 Y37.34764
G01 X140.07040 Y37.51429
G01 X140.03692 Y37.59488
G01 X139.97492 Y37.72594
G01 X139.94749 Y37.74847
G01 X139.86761 Y37.80184
G01 X139.72067 Y37.88038
G01 X139.64203 Y37.91294
G01 X138.43670 Y37.91294
G01 X138.39296 Y37.93107
G01 X138.37965 Y37.95152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.39293 Y37.89480 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.39293 Y37.89480
G01 X138.43670 Y37.91294
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.22128 Y40.30724 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.22128 Y40.30724
G01 X138.25681 Y40.32624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.21899 Y40.32998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.21899 Y40.32998
G01 X138.25681 Y40.32624
G01 X138.26667 Y40.32820
G01 X138.31437 Y40.33892
G01 X138.37244 Y40.35345
G01 X138.46085 Y40.37110
G01 X138.62748 Y40.39581
G01 X138.70845 Y40.40379
G01 X138.87508 Y40.41197
G01 X138.91439 Y40.41293
G01 X139.16438 Y40.41293
G01 X139.20368 Y40.41197
G01 X139.37030 Y40.40379
G01 X139.45127 Y40.39581
G01 X139.61790 Y40.37110
G01 X139.70632 Y40.35345
G01 X139.76436 Y40.33892
G01 X139.81206 Y40.32820
G01 X139.82194 Y40.32624
G01 X139.86118 Y40.33010
G01 X139.95541 Y40.34885
G01 X139.97492 Y40.35477
G01 X139.99631 Y40.38362
G01 X140.05376 Y40.46930
G01 X140.08315 Y40.51832
G01 X140.12130 Y40.58949
G01 X140.14447 Y40.63849
G01 X140.16954 Y40.69881
G01 X140.18706 Y40.74783
G01 X140.20311 Y40.80056
G01 X140.21538 Y40.84956
G01 X140.22498 Y40.89767
G01 X140.23225 Y40.94669
G01 X140.23669 Y40.99183
G01 X140.23911 Y41.04085
G01 X140.23967 Y41.06295
G01 X140.23967 Y42.26294
G01 X140.23911 Y42.28507
G01 X140.23669 Y42.33409
G01 X140.23225 Y42.37922
G01 X140.22498 Y42.42825
G01 X140.21538 Y42.47635
G01 X140.20311 Y42.52535
G01 X140.18706 Y42.57808
G01 X140.16954 Y42.62710
G01 X140.14447 Y42.68743
G01 X140.12130 Y42.73642
G01 X140.08315 Y42.80760
G01 X140.05376 Y42.85662
G01 X140.01348 Y42.91852
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.97492 Y40.35477 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.97492 Y40.35477
G01 X139.97492 Y40.22594
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.82194 Y40.32624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.82194 Y40.32624
G01 X139.86761 Y40.30183
G01 X139.94749 Y40.24847
G01 X139.97492 Y40.22594
G01 X140.03692 Y40.09488
G01 X140.07037 Y40.01431
G01 X140.13001 Y39.84768
G01 X140.14939 Y39.78395
G01 X140.19115 Y39.61730
G01 X140.20164 Y39.56465
G01 X140.22636 Y39.39803
G01 X140.23093 Y39.35172
G01 X140.23911 Y39.18510
G01 X140.23911 Y39.14083
G01 X140.23093 Y38.97420
G01 X140.22636 Y38.92787
G01 X140.20164 Y38.76125
G01 X140.19113 Y38.70857
G01 X140.14939 Y38.54194
G01 X140.13001 Y38.47824
G01 X140.07037 Y38.31162
G01 X140.03695 Y38.23110
G01 X139.97490 Y38.09993
G01 X139.94749 Y38.07743
G01 X139.86761 Y38.02404
G01 X139.72067 Y37.94550
G01 X139.64203 Y37.91294
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.97490 Y38.09993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.97490 Y38.09993
G01 X139.97492 Y37.72594
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52869 Y36.68383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52869 Y36.68383
G01 X143.52869 Y38.68380
G01 X143.52985 Y38.72452
G01 X143.53189 Y38.74200
G01 X143.55838 Y38.82810
G01 X143.60219 Y38.90064
G01 X143.66211 Y38.96054
G01 X143.73463 Y39.00438
G01 X143.82074 Y39.03084
G01 X143.83824 Y39.03290
G01 X143.87893 Y39.03407
G01 X145.87895 Y39.03407
G01 X145.91964 Y39.03288
G01 X145.93709 Y39.03087
G01 X146.02319 Y39.00438
G01 X146.05736 Y38.98523
G01 X146.09571 Y38.96054
G01 X146.15566 Y38.90064
G01 X146.19947 Y38.82810
G01 X146.22596 Y38.74200
G01 X146.22799 Y38.72452
G01 X146.22919 Y38.68380
G01 X146.22919 Y36.68383
G01 X146.22799 Y36.64312
G01 X146.22596 Y36.62564
G01 X146.19950 Y36.53954
G01 X146.15566 Y36.46702
G01 X146.09574 Y36.40710
G01 X146.02319 Y36.36326
G01 X145.93706 Y36.33679
G01 X145.91956 Y36.33474
G01 X145.87895 Y36.33357
G01 X143.87893 Y36.33357
G01 X143.83826 Y36.33474
G01 X143.82079 Y36.33679
G01 X143.73465 Y36.36326
G01 X143.66211 Y36.40710
G01 X143.60222 Y36.46702
G01 X143.56226 Y36.53222
G01 X143.55835 Y36.53956
G01 X143.53189 Y36.62564
G01 X143.52985 Y36.64312
G01 X143.52869 Y36.68383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.59171 Y33.93632 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.59171 Y33.93632
G01 X140.23880 Y33.93632
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.48445 Y34.18191 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.48445 Y34.18191
G01 X140.23880 Y33.93632
G01 X139.76093 Y33.73837
G01 X139.46888 Y33.44635
G01 X139.27088 Y32.96835
G01 X139.27093 Y31.84630
G01 X139.28036 Y31.75072
G01 X139.30825 Y31.65880
G01 X139.34536 Y31.58936
G01 X139.41119 Y31.56769
G01 X139.49753 Y31.54343
G01 X139.63621 Y31.51140
G01 X139.66499 Y31.50538
G01 X139.67840 Y31.50287
G01 X139.72021 Y31.49725
G01 X139.76093 Y31.49606
G01 X141.36092 Y31.49606
G01 X141.40161 Y31.49725
G01 X141.41909 Y31.49929
G01 X141.50519 Y31.52575
G01 X141.57774 Y31.56962
G01 X141.63763 Y31.62951
G01 X141.68150 Y31.70205
G01 X141.70796 Y31.78816
G01 X141.71000 Y31.80561
G01 X141.71116 Y31.84630
G01 X141.71116 Y33.44632
G01 X141.71000 Y33.48704
G01 X141.70796 Y33.50449
G01 X141.68150 Y33.59060
G01 X141.63763 Y33.66314
G01 X141.57774 Y33.72303
G01 X141.50519 Y33.76690
G01 X141.41909 Y33.79336
G01 X141.40161 Y33.79540
G01 X141.36092 Y33.79659
G01 X141.10680 Y33.79659
G01 X141.01454 Y33.80266
G01 X140.93743 Y33.81279
G01 X140.73397 Y33.86832
G01 X140.65683 Y33.90027
G01 X140.57248 Y33.94696
G01 X140.53364 Y34.01419
G01 X140.50443 Y34.09448
G01 X140.48447 Y34.16898
G01 X140.48287 Y34.17802
G01 X140.57256 Y34.39900
G01 X140.61249 Y34.46819
G01 X140.69681 Y34.58622
G01 X140.72252 Y34.61551
G01 X140.75374 Y34.64884
G01 X141.01569 Y34.91081
G01 X141.23692 Y35.13202
G01 X141.31007 Y35.20520
G01 X141.33380 Y35.23009
G01 X141.35688 Y35.25557
G01 X141.37733 Y35.28312
G01 X141.41561 Y35.34040
G01 X141.43324 Y35.36981
G01 X141.44794 Y35.40090
G01 X141.47426 Y35.46451
G01 X141.48581 Y35.49681
G01 X141.49417 Y35.53017
G01 X141.50761 Y35.59760
G01 X141.51264 Y35.63161
G01 X141.51434 Y35.66588
G01 X141.51518 Y35.70035
G01 X141.51518 Y55.64384
G01 X141.52125 Y55.73609
G01 X141.53141 Y55.81321
G01 X141.53849 Y55.85692
G01 X141.59857 Y55.92906
G01 X141.60560 Y55.93650
G01 X141.62099 Y55.95326
G01 X141.64675 Y55.98225
G01 X141.65185 Y55.98804
G01 X141.72280 Y56.06967
G01 X141.75168 Y56.10902
G01 X141.78962 Y56.16645
G01 X141.82658 Y56.22885
G01 X141.86346 Y56.30480
G01 X141.89046 Y56.36812
G01 X141.90324 Y56.40269
G01 X141.93542 Y56.51839
G01 X141.95061 Y56.58562
G01 X141.95081 Y56.58679
G01 X141.96486 Y56.74181
G01 X141.96714 Y56.77633
G01 X141.96488 Y56.81082
G01 X141.95081 Y56.96586
G01 X141.95061 Y56.96700
G01 X141.93542 Y57.03426
G01 X141.90324 Y57.14996
G01 X141.89046 Y57.18453
G01 X141.86346 Y57.24785
G01 X141.82658 Y57.32380
G01 X141.78962 Y57.38620
G01 X141.75168 Y57.44363
G01 X141.72282 Y57.48298
G01 X141.65185 Y57.56461
G01 X141.60410 Y57.61435
G01 X141.59463 Y57.62331
G01 X141.48228 Y57.71310
G01 X141.47482 Y57.71900
G01 X141.44507 Y57.74089
G01 X141.42529 Y57.75194
G01 X141.28719 Y57.82621
G01 X141.27766 Y57.83124
G01 X141.22298 Y57.85146
G01 X141.09745 Y57.89202
G01 X141.07312 Y57.89771
G01 X141.00542 Y57.91008
G01 X140.90995 Y57.92275
G01 X140.84939 Y57.92573
G01 X140.78048 Y57.92573
G01 X140.71990 Y57.92275
G01 X140.62442 Y57.91008
G01 X140.55673 Y57.89771
G01 X140.53240 Y57.89202
G01 X140.40687 Y57.85146
G01 X140.35221 Y57.83124
G01 X140.34266 Y57.82621
G01 X140.20456 Y57.75194
G01 X140.18475 Y57.74086
G01 X140.14756 Y57.71310
G01 X140.03522 Y57.62329
G01 X140.02575 Y57.61435
G01 X139.97799 Y57.56461
G01 X139.90703 Y57.48298
G01 X139.87817 Y57.44363
G01 X139.84023 Y57.38620
G01 X139.80327 Y57.32380
G01 X139.76639 Y57.24785
G01 X139.73939 Y57.18453
G01 X139.72661 Y57.14996
G01 X139.69443 Y57.03426
G01 X139.67924 Y56.96700
G01 X139.67904 Y56.96586
G01 X139.66496 Y56.81082
G01 X139.66270 Y56.77633
G01 X139.66499 Y56.74181
G01 X139.67906 Y56.58671
G01 X139.67924 Y56.58562
G01 X139.69443 Y56.51839
G01 X139.72661 Y56.40272
G01 X139.73939 Y56.36812
G01 X139.76639 Y56.30480
G01 X139.80327 Y56.22885
G01 X139.84023 Y56.16645
G01 X139.87817 Y56.10902
G01 X139.90703 Y56.06967
G01 X139.97799 Y55.98804
G01 X139.98307 Y55.98230
G01 X140.02402 Y55.93619
G01 X140.04459 Y55.91201
G01 X140.08993 Y55.85626
G01 X140.09158 Y55.84958
G01 X140.11180 Y55.71529
G01 X140.11361 Y55.68250
G01 X140.11467 Y55.64384
G01 X140.11467 Y55.60051
G01 X140.10860 Y55.50826
G01 X140.09844 Y55.43114
G01 X140.04292 Y55.22766
G01 X140.01099 Y55.15052
G01 X139.97551 Y55.07399
G01 X139.97490 Y55.07394
G01 X139.96293 Y55.07328
G01 X139.79544 Y55.07765
G01 X139.78793 Y55.07851
G01 X139.71396 Y55.08375
G01 X139.70703 Y55.08392
G01 X139.58602 Y55.09675
G01 X139.56171 Y55.10137
G01 X139.54917 Y55.10389
G01 X139.53314 Y55.10727
G01 X139.48142 Y55.11608
G01 X139.38592 Y55.12875
G01 X139.32539 Y55.13173
G01 X139.25648 Y55.13173
G01 X139.19590 Y55.12875
G01 X139.10042 Y55.11608
G01 X139.03273 Y55.10371
G01 X139.00840 Y55.09802
G01 X138.88287 Y55.05746
G01 X138.82821 Y55.03724
G01 X138.81866 Y55.03221
G01 X138.68056 Y54.95794
G01 X138.66075 Y54.94686
G01 X138.62356 Y54.91910
G01 X138.51122 Y54.82929
G01 X138.50175 Y54.82035
G01 X138.45399 Y54.77061
G01 X138.38303 Y54.68898
G01 X138.35417 Y54.64963
G01 X138.31622 Y54.59220
G01 X138.27927 Y54.52980
G01 X138.24239 Y54.45385
G01 X138.21539 Y54.39053
G01 X138.20261 Y54.35596
G01 X138.17043 Y54.24026
G01 X138.15524 Y54.17300
G01 X138.15504 Y54.17186
G01 X138.14096 Y54.01682
G01 X138.13870 Y53.98233
G01 X138.14099 Y53.94781
G01 X138.15506 Y53.79277
G01 X138.15524 Y53.79162
G01 X138.17043 Y53.72439
G01 X138.17703 Y53.70069
G01 X138.20261 Y53.60872
G01 X138.21539 Y53.57412
G01 X138.24239 Y53.51080
G01 X138.27927 Y53.43485
G01 X138.31622 Y53.37245
G01 X138.35417 Y53.31502
G01 X138.38303 Y53.27567
G01 X138.45399 Y53.19404
G01 X138.50175 Y53.14430
G01 X138.51122 Y53.13536
G01 X138.62356 Y53.04555
G01 X138.66075 Y53.01779
G01 X138.68056 Y53.00671
G01 X138.81866 Y52.93244
G01 X138.82821 Y52.92741
G01 X138.88287 Y52.90719
G01 X139.00838 Y52.86663
G01 X139.03273 Y52.86094
G01 X139.04866 Y52.85741
G01 X139.10042 Y52.84857
G01 X139.19593 Y52.83590
G01 X139.25648 Y52.83292
G01 X139.32539 Y52.83292
G01 X139.38592 Y52.83590
G01 X139.48142 Y52.84857
G01 X139.53314 Y52.85738
G01 X139.54917 Y52.86076
G01 X139.62595 Y52.87255
G01 X139.70418 Y52.88032
G01 X139.70705 Y52.88060
G01 X139.78681 Y52.88820
G01 X139.94350 Y52.89007
G01 X139.96433 Y52.88873
G01 X139.97233 Y52.88825
G01 X139.97492 Y52.88642
G01 X140.00035 Y52.83701
G01 X140.08041 Y52.61819
G01 X140.09715 Y52.54105
G01 X140.11305 Y52.41774
G01 X140.11406 Y52.39312
G01 X140.11467 Y52.36417
G01 X140.11467 Y48.01180
G01 X140.10860 Y47.91957
G01 X140.09844 Y47.84246
G01 X140.04289 Y47.63888
G01 X140.02691 Y47.60035
G01 X139.98833 Y47.58437
G01 X139.78478 Y47.52879
G01 X139.70766 Y47.51866
G01 X139.61541 Y47.51259
G01 X138.49093 Y47.51259
G01 X138.45024 Y47.51140
G01 X138.43273 Y47.50936
G01 X138.34665 Y47.48290
G01 X138.27411 Y47.43903
G01 X138.21422 Y47.37914
G01 X138.17035 Y47.30660
G01 X138.14389 Y47.22049
G01 X138.14185 Y47.20304
G01 X138.14069 Y47.16235
G01 X138.14069 Y45.56230
G01 X138.14185 Y45.52156
G01 X138.14345 Y45.50744
G01 X138.14389 Y45.50416
G01 X138.16537 Y45.43162
G01 X138.17035 Y45.41808
G01 X138.21422 Y45.34551
G01 X138.27411 Y45.28562
G01 X138.34665 Y45.24175
G01 X138.43276 Y45.21529
G01 X138.45021 Y45.21325
G01 X138.49093 Y45.21206
G01 X139.61541 Y45.21206
G01 X139.70766 Y45.20599
G01 X139.78478 Y45.19586
G01 X139.98833 Y45.14028
G01 X140.02691 Y45.12430
G01 X140.04289 Y45.08577
G01 X140.09844 Y44.88219
G01 X140.10860 Y44.80508
G01 X140.11467 Y44.71285
G01 X140.11467 Y43.36243
G01 X140.10860 Y43.27021
G01 X140.09844 Y43.19309
G01 X140.04289 Y42.98951
G01 X140.01348 Y42.91852
G01 X140.00642 Y42.91692
G01 X139.98701 Y42.91245
G01 X139.93250 Y42.90152
G01 X139.85049 Y42.88758
G01 X139.80055 Y42.88077
G01 X139.78485 Y42.87915
G01 X139.76436 Y42.87673
G01 X139.70766 Y42.86927
G01 X139.61541 Y42.86320
G01 X138.31437 Y42.86320
G01 X138.27998 Y42.86236
G01 X138.27482 Y42.86210
G01 X138.23119 Y42.85801
G01 X138.21038 Y42.85575
G01 X138.16385 Y42.84376
G01 X138.11683 Y42.82990
G01 X138.09116 Y42.82179
G01 X138.05339 Y42.80328
G01 X138.01008 Y42.78039
G01 X137.98323 Y42.76543
G01 X137.95298 Y42.74206
G01 X137.91506 Y42.71102
G01 X137.88884 Y42.68849
G01 X137.86631 Y42.66228
G01 X137.83528 Y42.62436
G01 X137.81191 Y42.59411
G01 X137.79702 Y42.56741
G01 X137.77414 Y42.52408
G01 X137.75552 Y42.48618
G01 X137.74742 Y42.46050
G01 X137.73357 Y42.41349
G01 X137.72156 Y42.36685
G01 X137.71930 Y42.34615
G01 X137.71521 Y42.30252
G01 X137.71496 Y42.29736
G01 X137.71412 Y42.26294
G01 X137.71412 Y41.06295
G01 X137.71496 Y41.02855
G01 X137.71521 Y41.02340
G01 X137.71930 Y40.97976
G01 X137.72156 Y40.95898
G01 X137.73357 Y40.91243
G01 X137.74742 Y40.86541
G01 X137.75552 Y40.83973
G01 X137.77414 Y40.80183
G01 X137.79702 Y40.75850
G01 X137.81191 Y40.73181
G01 X137.83528 Y40.70155
G01 X137.86631 Y40.66363
G01 X137.88884 Y40.63742
G01 X137.90754 Y40.62111
G01 X137.91501 Y40.61484
G01 X137.95143 Y40.58195
G01 X137.97579 Y40.55837
G01 X138.00337 Y40.53300
G01 X138.03462 Y40.50569
G01 X138.04122 Y40.49985
G01 X138.10147 Y40.44598
G01 X138.14122 Y40.40821
G01 X138.21335 Y40.33559
G01 X138.21772 Y40.33122
G01 X138.21899 Y40.32998
G01 X138.22128 Y40.30724
G01 X138.21475 Y40.29498
G01 X138.19507 Y40.25619
G01 X138.16908 Y40.20247
G01 X138.08641 Y40.06506
G01 X138.07686 Y40.05220
G01 X138.04584 Y40.00714
G01 X138.03599 Y39.99162
G01 X137.99842 Y39.93808
G01 X137.93639 Y39.85779
G01 X137.89697 Y39.80120
G01 X137.89027 Y39.79053
G01 X137.81899 Y39.65396
G01 X137.80378 Y39.62297
G01 X137.79265 Y39.59033
G01 X137.74648 Y39.44339
G01 X137.74363 Y39.43105
G01 X137.73152 Y39.36318
G01 X137.71790 Y39.25711
G01 X137.71496 Y39.19737
G01 X137.71496 Y39.12856
G01 X137.71790 Y39.06879
G01 X137.73152 Y38.96275
G01 X137.74363 Y38.89485
G01 X137.74648 Y38.88256
G01 X137.79265 Y38.73557
G01 X137.80378 Y38.70293
G01 X137.81902 Y38.67194
G01 X137.89027 Y38.53539
G01 X137.89697 Y38.52470
G01 X137.93639 Y38.46811
G01 X138.00177 Y38.38350
G01 X138.04196 Y38.33918
G01 X138.09060 Y38.29054
G01 X138.11574 Y38.26773
G01 X138.18117 Y38.20006
G01 X138.20695 Y38.16966
G01 X138.23274 Y38.14078
G01 X138.25872 Y38.11312
G01 X138.36974 Y37.96742
G01 X138.37965 Y37.95152
G01 X138.39484 Y37.92818
G01 X138.39484 Y37.89772
G01 X138.39293 Y37.89480
G01 X138.37965 Y37.87438
G01 X138.36974 Y37.85848
G01 X138.25872 Y37.71279
G01 X138.23274 Y37.68513
G01 X138.20698 Y37.65630
G01 X138.18115 Y37.62584
G01 X138.11572 Y37.55815
G01 X138.09062 Y37.53542
G01 X138.04193 Y37.48673
G01 X138.00177 Y37.44240
G01 X137.93637 Y37.35777
G01 X137.89697 Y37.30121
G01 X137.89027 Y37.29051
G01 X137.81902 Y37.15396
G01 X137.80378 Y37.12297
G01 X137.79265 Y37.09033
G01 X137.74648 Y36.94334
G01 X137.74363 Y36.93105
G01 X137.73152 Y36.86316
G01 X137.71790 Y36.75711
G01 X137.71496 Y36.69735
G01 X137.71496 Y36.62854
G01 X137.71790 Y36.56880
G01 X137.73152 Y36.46273
G01 X137.74363 Y36.39486
G01 X137.74648 Y36.38256
G01 X137.79265 Y36.23557
G01 X137.80378 Y36.20293
G01 X137.81902 Y36.17195
G01 X137.89027 Y36.03540
G01 X137.89697 Y36.02470
G01 X137.93637 Y35.96814
G01 X138.00177 Y35.88350
G01 X138.04193 Y35.83918
G01 X138.09062 Y35.79049
G01 X138.13495 Y35.75033
G01 X138.21958 Y35.68495
G01 X138.22928 Y35.67759
G01 X138.27607 Y35.64558
G01 X138.28679 Y35.63888
G01 X138.42331 Y35.56758
G01 X138.45435 Y35.55234
G01 X138.48704 Y35.54119
G01 X138.60137 Y35.50530
G01 X138.64559 Y35.48978
G01 X138.68917 Y35.47284
G01 X138.71259 Y35.46420
G01 X138.76385 Y35.44622
G01 X138.87355 Y35.39847
G01 X138.91439 Y35.37718
G01 X138.97698 Y35.34170
G01 X139.00754 Y35.32295
G01 X139.02867 Y35.28147
G01 X139.06065 Y35.20235
G01 X139.07033 Y35.15684
G01 X139.06426 Y35.13758
G01 X139.03230 Y35.03614
G01 X138.99870 Y34.96062
G01 X138.89778 Y34.79207
G01 X138.85440 Y34.73705
G01 X138.79933 Y34.67505
G01 X137.90678 Y33.78249
G01 X137.88308 Y33.75760
G01 X137.85996 Y33.73210
G01 X137.83954 Y33.70457
G01 X137.80127 Y33.64729
G01 X137.78361 Y33.61782
G01 X137.76893 Y33.58679
G01 X137.74259 Y33.52318
G01 X137.73101 Y33.49082
G01 X137.72268 Y33.45753
G01 X137.70927 Y33.39006
G01 X137.70421 Y33.35603
G01 X137.70251 Y33.32176
G01 X137.70167 Y33.28732
G01 X137.70167 Y33.11010
G01 X137.69560 Y33.01785
G01 X137.68544 Y32.94074
G01 X137.62989 Y32.73716
G01 X137.59794 Y32.66004
G01 X137.54658 Y32.57310
G01 X137.48402 Y32.53698
G01 X137.40376 Y32.50777
G01 X137.32926 Y32.48780
G01 X137.24513 Y32.47297
G01 X137.23462 Y32.47297
G01 X137.23248 Y32.47432
G01 X137.17937 Y32.50802
G01 X137.11585 Y32.55186
G01 X137.09662 Y32.56629
G01 X137.04691 Y32.60096
G01 X137.02913 Y32.61242
G01 X136.98765 Y32.64109
G01 X136.95839 Y32.66273
G01 X136.91227 Y32.69992
G01 X136.88295 Y32.72562
G01 X136.84940 Y32.75707
G01 X132.32340 Y37.28307
G01 X132.26244 Y37.35262
G01 X132.21509 Y37.41434
G01 X132.19780 Y37.43783
G01 X132.18124 Y37.55124
G01 X132.17867 Y37.59016
G01 X132.17717 Y37.63608
G01 X132.17717 Y38.34560
G01 X132.18324 Y38.43786
G01 X132.19340 Y38.51497
G01 X132.22556 Y38.65530
G01 X132.24687 Y38.72063
G01 X132.27059 Y38.80598
G01 X132.27867 Y38.84062
G01 X132.27933 Y38.84342
G01 X132.23435 Y38.92754
G01 X132.17341 Y39.00179
G01 X132.09917 Y39.06272
G01 X132.01446 Y39.10801
G01 X131.92538 Y39.13503
G01 X131.91550 Y39.13249
G01 X131.82691 Y39.10539
G01 X131.75574 Y39.07992
G01 X131.67494 Y39.05535
G01 X131.51812 Y39.01606
G01 X131.44880 Y39.00224
G01 X131.29196 Y38.97898
G01 X131.22909 Y38.97278
G01 X131.07230 Y38.96506
G01 X131.01159 Y38.96506
G01 X130.85475 Y38.97278
G01 X130.79186 Y38.97898
G01 X130.63504 Y39.00224
G01 X130.56577 Y39.01606
G01 X130.40893 Y39.05533
G01 X130.32805 Y39.07994
G01 X130.22693 Y39.11614
G01 X130.17004 Y39.13458
G01 X130.15693 Y39.13841
G01 X130.15538 Y39.13887
G01 X130.09747 Y39.19678
G01 X129.99798 Y39.31802
G01 X129.94461 Y39.39787
G01 X129.87070 Y39.53618
G01 X129.83392 Y39.62492
G01 X129.78840 Y39.77501
G01 X129.77194 Y39.85777
G01 X129.77194 Y41.08880
G01 X129.75546 Y41.17163
G01 X129.71759 Y41.29647
G01 X129.69214 Y41.31639
G01 X129.61706 Y41.38045
G01 X129.60547 Y41.39048
G01 X129.54380 Y41.44496
G01 X129.49422 Y41.49259
G01 X129.44413 Y41.54511
G01 X129.43174 Y41.55845
G01 X129.40039 Y41.59304
G01 X129.38038 Y41.61608
G01 X129.33903 Y41.66173
G01 X129.29033 Y41.71042
G01 X129.26377 Y41.73450
G01 X129.14276 Y41.77778
G01 X129.08388 Y41.79568
G01 X128.92706 Y41.83498
G01 X128.87850 Y41.84466
G01 X128.72165 Y41.86792
G01 X128.67908 Y41.87214
G01 X128.52226 Y41.87983
G01 X128.48160 Y41.87983
G01 X128.32475 Y41.87214
G01 X128.28216 Y41.86792
G01 X128.12534 Y41.84466
G01 X128.07682 Y41.83498
G01 X127.91998 Y41.79571
G01 X127.86105 Y41.77778
G01 X127.74007 Y41.73447
G01 X127.71348 Y41.71039
G01 X127.66484 Y41.66175
G01 X127.62346 Y41.61608
G01 X127.57766 Y41.56602
G01 X127.55803 Y41.54651
G01 X127.52376 Y41.51006
G01 X127.50886 Y41.49307
G01 X127.38724 Y41.38027
G01 X127.36141 Y41.36056
G01 X127.30845 Y41.31728
G01 X127.29237 Y41.30328
G01 X127.28701 Y41.29891
G01 X127.20776 Y41.29350
G01 X127.17731 Y41.29670
G01 X127.15214 Y41.31639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.28701 Y41.29891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.28701 Y41.29891
G01 X127.24840 Y41.17163
G01 X127.23192 Y41.08880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.23192 Y39.85777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.23192 Y39.85777
G01 X127.24840 Y39.77501
G01 X127.29392 Y39.62492
G01 X127.33070 Y39.53618
G01 X127.40461 Y39.39787
G01 X127.45798 Y39.31802
G01 X127.55747 Y39.19678
G01 X127.62539 Y39.12886
G01 X127.74662 Y39.02937
G01 X127.82651 Y38.97601
G01 X127.84083 Y38.96833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.73689 Y36.74525 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.73689 Y36.74525
G01 X129.69493 Y36.60692
G01 X129.65818 Y36.51817
G01 X129.58426 Y36.37987
G01 X129.53090 Y36.30001
G01 X129.43141 Y36.17878
G01 X129.36349 Y36.11086
G01 X129.33268 Y36.08559
G01 X129.32691 Y36.08086
G01 X129.32691 Y35.90327
G01 X129.39887 Y35.83131
G01 X130.04276 Y35.83131
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y36.83971
G01 X127.23342 Y36.75701
G01 X127.27893 Y36.60692
G01 X127.31569 Y36.51817
G01 X127.38963 Y36.37987
G01 X127.44299 Y36.30001
G01 X127.54248 Y36.17878
G01 X127.61040 Y36.11086
G01 X127.64693 Y36.08089
G01 X127.64693 Y35.55531
G01 X127.64929 Y35.50731
G01 X127.65600 Y35.43900
G01 X127.67474 Y35.34480
G01 X127.69138 Y35.29001
G01 X127.69466 Y35.27914
G01 X127.73141 Y35.19039
G01 X127.76377 Y35.12989
G01 X127.81713 Y35.05003
G01 X127.86065 Y34.99699
G01 X127.89295 Y34.96136
G01 X127.97296 Y34.88135
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.29711 Y31.29634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.29711 Y31.29634
G01 X130.27164 Y31.27927
G01 X130.15040 Y31.17978
G01 X130.08248 Y31.11186
G01 X129.98299 Y30.99063
G01 X129.92963 Y30.91074
G01 X129.85569 Y30.77244
G01 X129.81893 Y30.68369
G01 X129.77342 Y30.53363
G01 X129.75693 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.75693 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.75693 Y29.21971
G01 X129.77342 Y29.13701
G01 X129.81893 Y28.98692
G01 X129.85569 Y28.89817
G01 X129.92963 Y28.75987
G01 X129.98299 Y28.68001
G01 X130.08248 Y28.55878
G01 X130.15040 Y28.49086
G01 X130.15327 Y28.48850
G01 X130.15675 Y28.48741
G01 X130.22693 Y28.46543
G01 X130.30847 Y28.43625
G01 X130.39066 Y28.41126
G01 X130.54748 Y28.37199
G01 X130.61812 Y28.35792
G01 X130.77496 Y28.33462
G01 X130.83913 Y28.32830
G01 X130.99592 Y28.32058
G01 X131.05790 Y28.32058
G01 X131.21474 Y28.32830
G01 X131.27893 Y28.33462
G01 X131.43575 Y28.35792
G01 X131.50636 Y28.37199
G01 X131.66318 Y28.41126
G01 X131.74537 Y28.43625
G01 X131.82693 Y28.46543
G01 X131.84004 Y28.47003
G01 X131.86948 Y28.53226
G01 X131.90359 Y28.61441
G01 X131.95972 Y28.77128
G01 X131.97974 Y28.83711
G01 X132.01903 Y28.99391
G01 X132.03003 Y29.04910
G01 X132.05330 Y29.20595
G01 X132.05815 Y29.25499
G01 X132.06584 Y29.41179
G01 X132.06640 Y29.43533
G01 X132.06640 Y30.23531
G01 X132.06584 Y30.25885
G01 X132.06186 Y30.34016
G01 X132.02757 Y30.41267
G01 X132.00722 Y30.45075
G01 X131.92414 Y30.58941
G01 X131.90615 Y30.61636
G01 X131.81169 Y30.74371
G01 X131.79490 Y30.76419
G01 X131.68947 Y30.88052
G01 X131.67209 Y30.89787
G01 X131.55576 Y31.00333
G01 X131.53531 Y31.02009
G01 X131.40796 Y31.11453
G01 X131.38101 Y31.13254
G01 X131.24235 Y31.21562
G01 X131.20428 Y31.23597
G01 X131.05368 Y31.30716
G01 X130.99788 Y31.33022
G01 X130.83455 Y31.38867
G01 X130.80077 Y31.39995
G01 X130.75721 Y31.39472
G01 X130.60037 Y31.37147
G01 X130.51736 Y31.35491
G01 X130.36054 Y31.31562
G01 X130.29711 Y31.29634
G01 X129.21670 Y31.29634
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.75711 Y31.29634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.75711 Y31.29634
G01 X127.73164 Y31.27927
G01 X127.61040 Y31.17978
G01 X127.54248 Y31.11186
G01 X127.44299 Y30.99063
G01 X127.38963 Y30.91074
G01 X127.31569 Y30.77244
G01 X127.27893 Y30.68369
G01 X127.23342 Y30.53363
G01 X127.21691 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.30548 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.30548 Y28.31984
G01 X125.27150 Y28.30163
G01 X125.19164 Y28.24826
G01 X125.07040 Y28.14877
G01 X125.00248 Y28.08085
G01 X124.90299 Y27.95962
G01 X124.84963 Y27.87976
G01 X124.77569 Y27.74143
G01 X124.73893 Y27.65271
G01 X124.69342 Y27.50262
G01 X124.67693 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.67693 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.67693 Y26.18876
G01 X124.69342 Y26.10600
G01 X124.73129 Y25.98119
G01 X124.75671 Y25.96127
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.62166 Y25.97862 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.62166 Y25.97862
G01 X124.70096 Y25.98416
G01 X124.73154 Y25.98093
G01 X124.75671 Y25.96127
G01 X124.83180 Y25.89719
G01 X124.84340 Y25.88713
G01 X124.90510 Y25.83262
G01 X124.95463 Y25.78505
G01 X125.00472 Y25.73252
G01 X125.01712 Y25.71919
G01 X125.04846 Y25.68459
G01 X125.06845 Y25.66155
G01 X125.10983 Y25.61591
G01 X125.15852 Y25.56724
G01 X125.19992 Y25.52970
G01 X125.27990 Y25.46796
G01 X125.33644 Y25.42851
G01 X125.34546 Y25.42284
G01 X125.47510 Y25.35520
G01 X125.50604 Y25.34002
G01 X125.53875 Y25.32884
G01 X125.67823 Y25.28502
G01 X125.68864 Y25.28266
G01 X125.75643 Y25.27057
G01 X125.85666 Y25.25767
G01 X125.91247 Y25.25493
G01 X125.98138 Y25.25493
G01 X126.03718 Y25.25767
G01 X126.13743 Y25.27057
G01 X126.20525 Y25.28266
G01 X126.21564 Y25.28502
G01 X126.35509 Y25.32884
G01 X126.38778 Y25.34002
G01 X126.41874 Y25.35520
G01 X126.54838 Y25.42287
G01 X126.55740 Y25.42851
G01 X126.61396 Y25.46790
G01 X126.69392 Y25.52970
G01 X126.73532 Y25.56722
G01 X126.78402 Y25.61591
G01 X126.82537 Y25.66155
G01 X126.87116 Y25.71159
G01 X126.89082 Y25.73112
G01 X126.92509 Y25.76757
G01 X126.94000 Y25.78457
G01 X127.06161 Y25.89737
G01 X127.08742 Y25.91713
G01 X127.14040 Y25.96038
G01 X127.15646 Y25.97436
G01 X127.16166 Y25.97862
G01 X127.16187 Y25.97877
G01 X127.20047 Y26.10600
G01 X127.21691 Y26.18876
G01 X127.21691 Y27.41974
G01 X127.20047 Y27.50262
G01 X127.15493 Y27.65271
G01 X127.11818 Y27.74143
G01 X127.04426 Y27.87976
G01 X126.99090 Y27.95962
G01 X126.89141 Y28.08085
G01 X126.82349 Y28.14877
G01 X126.70225 Y28.24826
G01 X126.62237 Y28.30163
G01 X126.58833 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y27.41974
G01 X127.23342 Y27.50262
G01 X127.27893 Y27.65271
G01 X127.31569 Y27.74143
G01 X127.38963 Y27.87976
G01 X127.44299 Y27.95962
G01 X127.54248 Y28.08085
G01 X127.61040 Y28.14877
G01 X127.73164 Y28.24826
G01 X127.81150 Y28.30163
G01 X127.84548 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y29.21971
G01 X127.23342 Y29.13701
G01 X127.27893 Y28.98692
G01 X127.31569 Y28.89817
G01 X127.38963 Y28.75987
G01 X127.44299 Y28.68001
G01 X127.54248 Y28.55878
G01 X127.61040 Y28.49086
G01 X127.73164 Y28.39137
G01 X127.81150 Y28.33800
G01 X127.84548 Y28.31984
G01 X129.12833 Y28.31984
G01 X129.16237 Y28.33800
G01 X129.24225 Y28.39137
G01 X129.36349 Y28.49086
G01 X129.43141 Y28.55878
G01 X129.53090 Y28.68001
G01 X129.58426 Y28.75987
G01 X129.65818 Y28.89817
G01 X129.69493 Y28.98692
G01 X129.74047 Y29.13701
G01 X129.75693 Y29.21971
G01 X129.75693 Y30.45072
G01 X129.74047 Y30.53363
G01 X129.69493 Y30.68369
G01 X129.65818 Y30.77244
G01 X129.58426 Y30.91074
G01 X129.53090 Y30.99063
G01 X129.43141 Y31.11186
G01 X129.36349 Y31.17978
G01 X129.24225 Y31.27927
G01 X129.21670 Y31.29634
G01 X129.15330 Y31.31562
G01 X128.99648 Y31.35491
G01 X128.91350 Y31.37145
G01 X128.75668 Y31.39472
G01 X128.68063 Y31.40223
G01 X128.52381 Y31.40993
G01 X128.45003 Y31.40993
G01 X128.29323 Y31.40223
G01 X128.21721 Y31.39472
G01 X128.06037 Y31.37147
G01 X127.97736 Y31.35491
G01 X127.82054 Y31.31562
G01 X127.75711 Y31.29634
G01 X126.67670 Y31.29634
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.21711 Y31.29634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.21711 Y31.29634
G01 X125.19164 Y31.27927
G01 X125.07040 Y31.17978
G01 X125.00248 Y31.11186
G01 X124.90299 Y30.99063
G01 X124.84963 Y30.91074
G01 X124.77569 Y30.77244
G01 X124.73893 Y30.68369
G01 X124.69342 Y30.53363
G01 X124.67693 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.67693 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.67693 Y29.21971
G01 X124.69342 Y29.13701
G01 X124.73893 Y28.98692
G01 X124.77569 Y28.89817
G01 X124.84963 Y28.75987
G01 X124.90299 Y28.68001
G01 X125.00248 Y28.55878
G01 X125.07040 Y28.49086
G01 X125.19164 Y28.39137
G01 X125.27150 Y28.33800
G01 X125.30548 Y28.31984
G01 X126.58833 Y28.31984
G01 X126.62237 Y28.33800
G01 X126.70225 Y28.39137
G01 X126.82349 Y28.49086
G01 X126.89141 Y28.55878
G01 X126.99090 Y28.68001
G01 X127.04426 Y28.75987
G01 X127.11818 Y28.89817
G01 X127.15493 Y28.98692
G01 X127.20047 Y29.13701
G01 X127.21691 Y29.21971
G01 X127.21691 Y30.45072
G01 X127.20047 Y30.53363
G01 X127.15493 Y30.68369
G01 X127.11818 Y30.77244
G01 X127.04426 Y30.91074
G01 X126.99090 Y30.99063
G01 X126.89141 Y31.11186
G01 X126.82349 Y31.17978
G01 X126.70225 Y31.27927
G01 X126.67670 Y31.29634
G01 X126.61330 Y31.31562
G01 X126.45648 Y31.35491
G01 X126.37350 Y31.37145
G01 X126.21668 Y31.39472
G01 X126.14063 Y31.40223
G01 X125.98381 Y31.40993
G01 X125.91003 Y31.40993
G01 X125.75323 Y31.40223
G01 X125.67721 Y31.39472
G01 X125.52037 Y31.37147
G01 X125.43736 Y31.35491
G01 X125.28054 Y31.31562
G01 X125.21711 Y31.29634
G01 X124.13670 Y31.29634
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.13691 Y30.45072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.13691 Y30.45072
G01 X122.15342 Y30.53363
G01 X122.19893 Y30.68369
G01 X122.23569 Y30.77244
G01 X122.30963 Y30.91074
G01 X122.36299 Y30.99063
G01 X122.46248 Y31.11186
G01 X122.53040 Y31.17978
G01 X122.65164 Y31.27927
G01 X122.67711 Y31.29634
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X123.29497 Y32.97635 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X123.29497 Y32.97635
G01 X122.62286 Y32.97632
G01 X121.70691 Y33.89227
G01 X121.70691 Y36.08086
G01 X121.74349 Y36.11086
G01 X121.81141 Y36.17878
G01 X121.89192 Y36.27690
G01 X121.91090 Y36.30001
G01 X121.96426 Y36.37987
G01 X122.03818 Y36.51817
G01 X122.07493 Y36.60692
G01 X122.12047 Y36.75701
G01 X122.13691 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.76898 Y33.92633 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.76898 Y33.92633
G01 X125.35295 Y34.34236
G01 X125.32176 Y34.37675
G01 X125.32065 Y34.37800
G01 X125.27713 Y34.43103
G01 X125.22377 Y34.51089
G01 X125.19141 Y34.57139
G01 X125.15466 Y34.66014
G01 X125.13474 Y34.72580
G01 X125.11600 Y34.82001
G01 X125.10929 Y34.88831
G01 X125.10693 Y34.93631
G01 X125.10693 Y36.08089
G01 X125.07040 Y36.11086
G01 X125.00248 Y36.17878
G01 X124.90299 Y36.30001
G01 X124.84963 Y36.37987
G01 X124.77569 Y36.51817
G01 X124.73893 Y36.60692
G01 X124.69342 Y36.75701
G01 X124.67693 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.67693 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.67693 Y38.07072
G01 X124.69342 Y38.15363
G01 X124.73893 Y38.30369
G01 X124.77569 Y38.39244
G01 X124.84963 Y38.53074
G01 X124.90299 Y38.61063
G01 X125.00248 Y38.73186
G01 X125.07040 Y38.79978
G01 X125.19164 Y38.89927
G01 X125.27150 Y38.95264
G01 X125.30083 Y38.96833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.06802 Y38.96031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.06802 Y38.96031
G01 X124.09738 Y38.97601
G01 X124.17724 Y39.02937
G01 X124.29847 Y39.12886
G01 X124.36639 Y39.19678
G01 X124.46588 Y39.31802
G01 X124.51925 Y39.39787
G01 X124.59319 Y39.53618
G01 X124.62994 Y39.62492
G01 X124.67546 Y39.77501
G01 X124.69194 Y39.85777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.69194 Y41.08880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.69194 Y41.08880
G01 X124.70840 Y41.17163
G01 X124.74701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.61214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.61214 Y41.31639
G01 X124.63731 Y41.29670
G01 X124.66776 Y41.29350
G01 X124.74701 Y41.29891
G01 X124.75237 Y41.30328
G01 X124.76845 Y41.31728
G01 X124.82141 Y41.36056
G01 X124.84724 Y41.38027
G01 X124.96886 Y41.49307
G01 X124.98376 Y41.51006
G01 X125.01803 Y41.54651
G01 X125.03766 Y41.56602
G01 X125.08346 Y41.61608
G01 X125.12484 Y41.66175
G01 X125.17348 Y41.71039
G01 X125.20007 Y41.73447
G01 X125.32105 Y41.77778
G01 X125.37998 Y41.79571
G01 X125.53682 Y41.83498
G01 X125.58534 Y41.84466
G01 X125.74216 Y41.86792
G01 X125.78475 Y41.87214
G01 X125.94160 Y41.87983
G01 X125.98226 Y41.87983
G01 X126.13908 Y41.87214
G01 X126.18165 Y41.86792
G01 X126.33850 Y41.84466
G01 X126.38706 Y41.83498
G01 X126.54388 Y41.79568
G01 X126.60276 Y41.77778
G01 X126.72377 Y41.73450
G01 X126.75033 Y41.71042
G01 X126.79903 Y41.66173
G01 X126.84038 Y41.61608
G01 X126.86039 Y41.59304
G01 X126.89174 Y41.55845
G01 X126.90413 Y41.54511
G01 X126.95422 Y41.49259
G01 X127.00380 Y41.44496
G01 X127.06547 Y41.39048
G01 X127.07706 Y41.38045
G01 X127.15214 Y41.31639
G01 X127.17759 Y41.29647
G01 X127.21546 Y41.17163
G01 X127.23192 Y41.08880
G01 X127.23192 Y39.85777
G01 X127.21546 Y39.77501
G01 X127.16994 Y39.62492
G01 X127.13319 Y39.53618
G01 X127.05925 Y39.39787
G01 X127.00588 Y39.31802
G01 X126.90639 Y39.19678
G01 X126.83847 Y39.12886
G01 X126.71724 Y39.02937
G01 X126.63738 Y38.97601
G01 X126.60802 Y38.96031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y38.07072
G01 X127.23342 Y38.15363
G01 X127.27893 Y38.30369
G01 X127.31569 Y38.39244
G01 X127.38963 Y38.53074
G01 X127.44299 Y38.61063
G01 X127.54248 Y38.73186
G01 X127.61040 Y38.79978
G01 X127.73164 Y38.89927
G01 X127.81150 Y38.95264
G01 X127.84083 Y38.96833
G01 X127.98086 Y38.96833
G01 X128.00017 Y38.96816
G01 X128.06786 Y38.96679
G01 X128.08422 Y38.96661
G01 X128.23179 Y38.96661
G01 X128.24805 Y38.96640
G01 X128.29882 Y38.96524
G01 X128.31398 Y38.96506
G01 X128.45643 Y38.96506
G01 X128.47157 Y38.96488
G01 X128.51729 Y38.96376
G01 X128.53242 Y38.96358
G01 X128.67487 Y38.96358
G01 X128.69003 Y38.96341
G01 X128.74076 Y38.96224
G01 X128.75711 Y38.96206
G01 X128.90459 Y38.96206
G01 X128.92107 Y38.96188
G01 X128.98879 Y38.96051
G01 X129.00791 Y38.96033
G01 X129.14802 Y38.96031
G01 X129.16237 Y38.95264
G01 X129.24225 Y38.89927
G01 X129.36349 Y38.79978
G01 X129.43141 Y38.73186
G01 X129.53090 Y38.61063
G01 X129.58426 Y38.53074
G01 X129.65818 Y38.39244
G01 X129.69493 Y38.30369
G01 X129.73692 Y38.16534
G01 X129.73872 Y38.15310
G01 X129.74809 Y38.05833
G01 X129.75579 Y37.90148
G01 X129.75693 Y37.85533
G01 X129.75693 Y37.05531
G01 X129.75579 Y37.00916
G01 X129.74809 Y36.85234
G01 X129.73872 Y36.75759
G01 X129.73689 Y36.74525
G01 X129.73694 Y36.25531
G01 X129.74634 Y36.15973
G01 X129.77423 Y36.06781
G01 X129.81952 Y35.98307
G01 X129.88045 Y35.90883
G01 X129.95470 Y35.84789
G01 X129.95698 Y35.84667
G01 X130.22693 Y35.79831
G01 X131.67656 Y35.79831
G01 X132.28134 Y35.54782
G01 X132.30082 Y35.53918
G01 X132.36671 Y35.50802
G01 X132.39726 Y35.49173
G01 X132.45792 Y35.45536
G01 X132.48190 Y35.43936
G01 X132.53760 Y35.39806
G01 X132.55741 Y35.38180
G01 X132.60831 Y35.33568
G01 X132.61718 Y35.32722
G01 X135.84178 Y32.10261
G01 X135.85024 Y32.09372
G01 X135.89639 Y32.04282
G01 X135.91262 Y32.02303
G01 X135.95395 Y31.96733
G01 X135.96213 Y31.95572
G01 X135.96454 Y31.94173
G01 X135.97473 Y31.87310
G01 X135.97724 Y31.84765
G01 X135.98062 Y31.77902
G01 X135.98090 Y31.76672
G01 X135.98090 Y11.87581
G01 X135.98062 Y11.86354
G01 X135.97724 Y11.79491
G01 X135.97473 Y11.76948
G01 X135.96454 Y11.70085
G01 X135.95890 Y11.67261
G01 X135.94173 Y11.60400
G01 X135.93165 Y11.57080
G01 X135.90709 Y11.50220
G01 X135.89942 Y11.48233
G01 X135.61587 Y10.79783
G01 X134.85192 Y10.03387
G01 X134.85192 Y9.64340
G01 X134.85311 Y9.64241
G01 X134.92103 Y9.57449
G01 X135.01433 Y9.46085
G01 X135.06769 Y9.38097
G01 X135.13698 Y9.25130
G01 X135.17374 Y9.16255
G01 X135.21643 Y9.02186
G01 X135.23515 Y8.92765
G01 X135.24958 Y8.78135
G01 X135.25194 Y8.73332
G01 X135.25194 Y8.71323
G01 X135.21590 Y8.63753
G01 X135.18395 Y8.56042
G01 X135.12840 Y8.35684
G01 X135.11824 Y8.27972
G01 X135.11217 Y8.18747
G01 X135.11217 Y7.23332
G01 X135.11133 Y7.19895
G01 X135.10876 Y7.14699
G01 X135.09667 Y7.05265
G01 X135.08456 Y6.98478
G01 X135.08260 Y6.97627
G01 X135.04115 Y6.84432
G01 X135.02997 Y6.81160
G01 X135.01478 Y6.78064
G01 X134.95078 Y6.65799
G01 X134.94613 Y6.65059
G01 X134.90673 Y6.59405
G01 X134.85611 Y6.52857
G01 X134.83424 Y6.49865
G01 X134.81867 Y6.47615
G01 X134.81646 Y6.47300
G01 X134.77714 Y6.41684
G01 X134.73818 Y6.35539
G01 X134.69716 Y6.28379
G01 X134.69672 Y6.28303
G01 X134.66830 Y6.23332
G01 X134.69533 Y6.18199
G01 X134.75776 Y6.08087
G01 X134.77872 Y6.05181
G01 X134.80320 Y6.01572
G01 X134.81908 Y5.99083
G01 X134.85614 Y5.93807
G01 X134.90676 Y5.87257
G01 X134.94613 Y5.81605
G01 X134.95078 Y5.80866
G01 X135.01478 Y5.68600
G01 X135.02997 Y5.65504
G01 X135.04115 Y5.62233
G01 X135.08260 Y5.49037
G01 X135.08456 Y5.48186
G01 X135.09667 Y5.41402
G01 X135.10876 Y5.31966
G01 X135.11133 Y5.26774
G01 X135.11217 Y5.23335
G01 X135.11217 Y3.73333
G01 X135.11133 Y3.69891
G01 X135.10876 Y3.64699
G01 X135.09667 Y3.55263
G01 X135.08456 Y3.48479
G01 X135.08260 Y3.47628
G01 X135.04115 Y3.34433
G01 X135.02997 Y3.31161
G01 X135.01478 Y3.28065
G01 X134.95078 Y3.15799
G01 X134.94613 Y3.15060
G01 X134.90676 Y3.09409
G01 X134.84857 Y3.01877
G01 X134.81367 Y2.98027
G01 X134.76497 Y2.93158
G01 X134.72647 Y2.89670
G01 X134.65113 Y2.83849
G01 X134.59462 Y2.79912
G01 X134.58725 Y2.79449
G01 X134.46462 Y2.73048
G01 X134.43361 Y2.71527
G01 X134.40099 Y2.70412
G01 X134.26896 Y2.66264
G01 X134.26051 Y2.66071
G01 X134.19261 Y2.64857
G01 X134.09825 Y2.63648
G01 X134.04633 Y2.63391
G01 X133.97755 Y2.63391
G01 X133.92558 Y2.63648
G01 X133.83125 Y2.64857
G01 X133.76333 Y2.66071
G01 X133.75487 Y2.66264
G01 X133.62284 Y2.70412
G01 X133.59025 Y2.71524
G01 X133.55926 Y2.73046
G01 X133.43661 Y2.79449
G01 X133.42924 Y2.79909
G01 X133.37267 Y2.83854
G01 X133.29736 Y2.89668
G01 X133.25886 Y2.93160
G01 X133.21019 Y2.98027
G01 X133.17529 Y3.01877
G01 X133.11710 Y3.09409
G01 X133.07773 Y3.15060
G01 X133.07308 Y3.15802
G01 X133.00907 Y3.28062
G01 X132.99386 Y3.31161
G01 X132.98271 Y3.34433
G01 X132.94125 Y3.47625
G01 X132.93930 Y3.48479
G01 X132.92718 Y3.55258
G01 X132.91507 Y3.64699
G01 X132.91253 Y3.69886
G01 X132.91169 Y3.73333
G01 X132.91169 Y5.23335
G01 X132.91253 Y5.26779
G01 X132.91507 Y5.31966
G01 X132.92718 Y5.41407
G01 X132.93930 Y5.48186
G01 X132.94125 Y5.49040
G01 X132.98271 Y5.62233
G01 X132.99386 Y5.65504
G01 X133.00907 Y5.68603
G01 X133.07308 Y5.80866
G01 X133.07773 Y5.81605
G01 X133.11710 Y5.87257
G01 X133.16775 Y5.93810
G01 X133.18954 Y5.96789
G01 X133.20519 Y5.99050
G01 X133.20735 Y5.99360
G01 X133.24672 Y6.04983
G01 X133.28565 Y6.11125
G01 X133.32667 Y6.18285
G01 X133.32713 Y6.18361
G01 X133.35553 Y6.23332
G01 X133.32848 Y6.28476
G01 X133.26607 Y6.38585
G01 X133.24509 Y6.41491
G01 X133.22058 Y6.45100
G01 X133.20478 Y6.47582
G01 X133.16772 Y6.52857
G01 X133.11712 Y6.59405
G01 X133.07773 Y6.65059
G01 X133.07308 Y6.65801
G01 X133.00907 Y6.78062
G01 X132.99559 Y6.80792
G01 X132.99383 Y6.81166
G01 X132.98271 Y6.84432
G01 X132.94125 Y6.97625
G01 X132.93930 Y6.98478
G01 X132.92718 Y7.05257
G01 X132.91507 Y7.14699
G01 X132.91253 Y7.19888
G01 X132.91169 Y7.23332
G01 X132.91169 Y8.73332
G01 X132.91253 Y8.76779
G01 X132.91507 Y8.81965
G01 X132.92017 Y8.85940
G01 X132.92317 Y8.88696
G01 X132.92523 Y8.91023
G01 X132.93137 Y8.98424
G01 X132.93384 Y9.03428
G01 X132.93513 Y9.11450
G01 X132.93521 Y9.13675
G01 X132.93427 Y9.22608
G01 X132.92617 Y9.32481
G01 X132.95619 Y9.38097
G01 X133.00956 Y9.46085
G01 X133.10282 Y9.57449
G01 X133.17074 Y9.64241
G01 X133.17194 Y9.64337
G01 X133.17189 Y9.69732
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.84654 Y9.41267 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.84654 Y9.41267
G01 X132.90041 Y9.35882
G01 X132.92586 Y9.32846
G01 X132.93427 Y9.22608
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.11995 Y10.24734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.11995 Y10.24734
G01 X129.98718 Y10.11452
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.84446 Y10.28335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.84446 Y10.28335
G01 X129.91401 Y10.24734
G01 X130.11995 Y10.24734
G01 X130.80440 Y10.53082
G01 X130.82427 Y10.53850
G01 X130.89287 Y10.56306
G01 X130.92607 Y10.57314
G01 X130.99468 Y10.59034
G01 X131.02292 Y10.59598
G01 X131.09153 Y10.60614
G01 X131.11700 Y10.60865
G01 X131.18563 Y10.61203
G01 X131.19790 Y10.61233
G01 X132.03046 Y10.61233
G01 X132.04276 Y10.61264
G01 X132.11136 Y10.61602
G01 X132.13681 Y10.61853
G01 X132.20542 Y10.62869
G01 X132.21939 Y10.63113
G01 X132.23102 Y10.63931
G01 X132.28672 Y10.68061
G01 X132.30653 Y10.69686
G01 X132.35744 Y10.74299
G01 X132.36630 Y10.75147
G01 X133.94179 Y12.32696
G01 X133.95024 Y12.33585
G01 X133.99640 Y12.38673
G01 X134.01263 Y12.40654
G01 X134.05395 Y12.46224
G01 X134.06213 Y12.47385
G01 X134.06454 Y12.48784
G01 X134.07473 Y12.55647
G01 X134.07724 Y12.58190
G01 X134.08062 Y12.65053
G01 X134.08093 Y12.66280
G01 X134.08093 Y30.97973
G01 X134.08062 Y30.99200
G01 X134.07724 Y31.06063
G01 X134.07473 Y31.08608
G01 X134.06454 Y31.15471
G01 X134.06211 Y31.16873
G01 X134.05395 Y31.18031
G01 X134.01265 Y31.23602
G01 X133.99640 Y31.25583
G01 X133.95027 Y31.30673
G01 X133.94181 Y31.31559
G01 X131.83521 Y33.42219
G01 X131.82632 Y33.43068
G01 X131.77542 Y33.47680
G01 X131.75561 Y33.49306
G01 X131.69991 Y33.53436
G01 X131.68271 Y33.54617
G01 X131.67504 Y33.54742
G01 X131.60643 Y33.55760
G01 X131.58048 Y33.56017
G01 X131.51187 Y33.56352
G01 X131.49935 Y33.56385
G01 X126.84193 Y33.56385
G01 X126.82938 Y33.56415
G01 X126.76075 Y33.56751
G01 X126.73479 Y33.57007
G01 X126.66618 Y33.58026
G01 X126.63741 Y33.58600
G01 X126.56880 Y33.60317
G01 X126.53507 Y33.61343
G01 X126.46646 Y33.63799
G01 X126.44632 Y33.64576
G01 X125.76898 Y33.92633
G01 X124.72087 Y33.92631
G01 X124.24691 Y34.40027
G01 X124.24691 Y36.08086
G01 X124.28349 Y36.11086
G01 X124.35141 Y36.17878
G01 X124.43192 Y36.27690
G01 X124.45090 Y36.30001
G01 X124.50426 Y36.37987
G01 X124.57818 Y36.51817
G01 X124.61493 Y36.60692
G01 X124.66047 Y36.75701
G01 X124.67693 Y36.83971
G01 X124.67693 Y38.07072
G01 X124.66047 Y38.15363
G01 X124.61493 Y38.30369
G01 X124.57818 Y38.39244
G01 X124.50426 Y38.53074
G01 X124.45090 Y38.61063
G01 X124.35141 Y38.73186
G01 X124.28349 Y38.79978
G01 X124.16225 Y38.89927
G01 X124.08237 Y38.95264
G01 X124.06802 Y38.96031
G01 X123.92791 Y38.96033
G01 X123.90879 Y38.96051
G01 X123.84107 Y38.96188
G01 X123.82459 Y38.96206
G01 X123.67711 Y38.96206
G01 X123.66076 Y38.96224
G01 X123.61003 Y38.96341
G01 X123.59487 Y38.96358
G01 X123.45242 Y38.96358
G01 X123.43729 Y38.96376
G01 X123.39157 Y38.96488
G01 X123.37643 Y38.96506
G01 X123.23398 Y38.96506
G01 X123.21882 Y38.96524
G01 X123.16805 Y38.96640
G01 X123.15179 Y38.96661
G01 X123.00422 Y38.96661
G01 X122.98786 Y38.96679
G01 X122.92017 Y38.96816
G01 X122.90086 Y38.96833
G01 X122.76083 Y38.96833
G01 X122.73150 Y38.95264
G01 X122.65164 Y38.89927
G01 X122.53040 Y38.79978
G01 X122.46248 Y38.73186
G01 X122.36299 Y38.61063
G01 X122.30963 Y38.53074
G01 X122.23569 Y38.39244
G01 X122.19893 Y38.30369
G01 X122.15342 Y38.15363
G01 X122.13691 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X120.22083 Y38.96833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X120.22083 Y38.96833
G01 X120.20651 Y38.97601
G01 X120.12662 Y39.02937
G01 X120.00539 Y39.12886
G01 X119.93747 Y39.19678
G01 X119.83798 Y39.31802
G01 X119.78461 Y39.39787
G01 X119.71070 Y39.53618
G01 X119.67392 Y39.62492
G01 X119.62840 Y39.77501
G01 X119.61194 Y39.85777
G01 X119.61194 Y41.08880
G01 X119.59546 Y41.17163
G01 X119.55759 Y41.29647
G01 X119.53214 Y41.31639
G01 X119.45706 Y41.38045
G01 X119.44547 Y41.39048
G01 X119.38380 Y41.44496
G01 X119.33422 Y41.49259
G01 X119.28413 Y41.54511
G01 X119.27174 Y41.55845
G01 X119.24039 Y41.59304
G01 X119.22038 Y41.61608
G01 X119.17903 Y41.66173
G01 X119.13033 Y41.71042
G01 X119.10377 Y41.73450
G01 X118.98276 Y41.77778
G01 X118.92388 Y41.79568
G01 X118.76706 Y41.83498
G01 X118.71850 Y41.84466
G01 X118.56165 Y41.86792
G01 X118.51908 Y41.87214
G01 X118.36226 Y41.87983
G01 X118.32160 Y41.87983
G01 X118.16475 Y41.87214
G01 X118.12216 Y41.86792
G01 X117.96534 Y41.84466
G01 X117.91682 Y41.83498
G01 X117.75998 Y41.79571
G01 X117.70105 Y41.77778
G01 X117.57326 Y41.73206
G01 X117.54911 Y41.71573
G01 X117.52020 Y41.69701
G01 X117.48838 Y41.67524
G01 X117.45515 Y41.65126
G01 X117.34941 Y41.58641
G01 X117.26059 Y41.54026
G01 X117.24218 Y41.53092
G01 X117.23250 Y41.52609
G01 X117.16504 Y41.53678
G01 X117.09915 Y41.55319
G01 X117.09191 Y41.56361
G01 X117.01637 Y41.67290
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.23250 Y41.52609 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.23250 Y41.52609
G01 X117.17070 Y41.41044
G01 X117.13392 Y41.32170
G01 X117.09191 Y41.18319
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.09191 Y39.76343 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.09191 Y39.76343
G01 X117.13392 Y39.62492
G01 X117.17070 Y39.53618
G01 X117.24461 Y39.39787
G01 X117.29798 Y39.31802
G01 X117.39747 Y39.19678
G01 X117.46539 Y39.12886
G01 X117.58662 Y39.02937
G01 X117.66651 Y38.97601
G01 X117.68083 Y38.96833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X118.98802 Y38.96031 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X118.98802 Y38.96031
G01 X119.01738 Y38.97601
G01 X119.09724 Y39.02937
G01 X119.21847 Y39.12886
G01 X119.28639 Y39.19678
G01 X119.38588 Y39.31802
G01 X119.43925 Y39.39787
G01 X119.51319 Y39.53618
G01 X119.54994 Y39.62492
G01 X119.59546 Y39.77501
G01 X119.61194 Y39.85777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.61194 Y41.08880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.61194 Y41.08880
G01 X119.62840 Y41.17163
G01 X119.66701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.53214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.53214 Y41.31639
G01 X119.55731 Y41.29670
G01 X119.58776 Y41.29350
G01 X119.66701 Y41.29891
G01 X119.67237 Y41.30328
G01 X119.68845 Y41.31728
G01 X119.74141 Y41.36056
G01 X119.76724 Y41.38027
G01 X119.88886 Y41.49307
G01 X119.90376 Y41.51006
G01 X119.93803 Y41.54651
G01 X119.95766 Y41.56602
G01 X120.00346 Y41.61608
G01 X120.04484 Y41.66175
G01 X120.09348 Y41.71039
G01 X120.12007 Y41.73447
G01 X120.24105 Y41.77778
G01 X120.29998 Y41.79571
G01 X120.45682 Y41.83498
G01 X120.50534 Y41.84466
G01 X120.66216 Y41.86792
G01 X120.70475 Y41.87214
G01 X120.86160 Y41.87983
G01 X120.90226 Y41.87983
G01 X121.05908 Y41.87214
G01 X121.10165 Y41.86792
G01 X121.25850 Y41.84466
G01 X121.30706 Y41.83498
G01 X121.46388 Y41.79568
G01 X121.52276 Y41.77778
G01 X121.64377 Y41.73450
G01 X121.67033 Y41.71042
G01 X121.71903 Y41.66173
G01 X121.76038 Y41.61608
G01 X121.78039 Y41.59304
G01 X121.81174 Y41.55845
G01 X121.82413 Y41.54511
G01 X121.87422 Y41.49259
G01 X121.92380 Y41.44496
G01 X121.98547 Y41.39048
G01 X121.99706 Y41.38045
G01 X122.07214 Y41.31639
G01 X122.09759 Y41.29647
G01 X122.13546 Y41.17163
G01 X122.15192 Y41.08880
G01 X122.15192 Y39.85777
G01 X122.13546 Y39.77501
G01 X122.08994 Y39.62492
G01 X122.05319 Y39.53618
G01 X121.97925 Y39.39787
G01 X121.92588 Y39.31802
G01 X121.82639 Y39.19678
G01 X121.75847 Y39.12886
G01 X121.63724 Y39.02937
G01 X121.55738 Y38.97601
G01 X121.52802 Y38.96031
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.76083 Y38.96833 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.76083 Y38.96833
G01 X122.74651 Y38.97601
G01 X122.66662 Y39.02937
G01 X122.54539 Y39.12886
G01 X122.47747 Y39.19678
G01 X122.37798 Y39.31802
G01 X122.32461 Y39.39787
G01 X122.25070 Y39.53618
G01 X122.21392 Y39.62492
G01 X122.16840 Y39.77501
G01 X122.15192 Y39.85777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.15192 Y41.08880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.15192 Y41.08880
G01 X122.16840 Y41.17163
G01 X122.20701 Y41.29891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.07214 Y41.31639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.07214 Y41.31639
G01 X122.09731 Y41.29670
G01 X122.12776 Y41.29350
G01 X122.20701 Y41.29891
G01 X122.21237 Y41.30328
G01 X122.22845 Y41.31728
G01 X122.28141 Y41.36056
G01 X122.30724 Y41.38027
G01 X122.42886 Y41.49307
G01 X122.44376 Y41.51006
G01 X122.47803 Y41.54651
G01 X122.49766 Y41.56602
G01 X122.54346 Y41.61608
G01 X122.58484 Y41.66175
G01 X122.63348 Y41.71039
G01 X122.66007 Y41.73447
G01 X122.78105 Y41.77778
G01 X122.83998 Y41.79571
G01 X122.99682 Y41.83498
G01 X123.04534 Y41.84466
G01 X123.20216 Y41.86792
G01 X123.24475 Y41.87214
G01 X123.40160 Y41.87983
G01 X123.44226 Y41.87983
G01 X123.59908 Y41.87214
G01 X123.64165 Y41.86792
G01 X123.79850 Y41.84466
G01 X123.84706 Y41.83498
G01 X124.00388 Y41.79568
G01 X124.06276 Y41.77778
G01 X124.18377 Y41.73450
G01 X124.21033 Y41.71042
G01 X124.25903 Y41.66173
G01 X124.30038 Y41.61608
G01 X124.32039 Y41.59304
G01 X124.35174 Y41.55845
G01 X124.36413 Y41.54511
G01 X124.41422 Y41.49259
G01 X124.46380 Y41.44496
G01 X124.52547 Y41.39048
G01 X124.53706 Y41.38045
G01 X124.61214 Y41.31639
G01 X124.63759 Y41.29647
G01 X124.67546 Y41.17163
G01 X124.69194 Y41.08880
G01 X124.69194 Y39.85777
G01 X124.70840 Y39.77501
G01 X124.75392 Y39.62492
G01 X124.79070 Y39.53618
G01 X124.86461 Y39.39787
G01 X124.91798 Y39.31802
G01 X125.01747 Y39.19678
G01 X125.08539 Y39.12886
G01 X125.20662 Y39.02937
G01 X125.28651 Y38.97601
G01 X125.30083 Y38.96833
G01 X125.44086 Y38.96833
G01 X125.46017 Y38.96816
G01 X125.52786 Y38.96679
G01 X125.54422 Y38.96661
G01 X125.69179 Y38.96661
G01 X125.70805 Y38.96640
G01 X125.75882 Y38.96524
G01 X125.77398 Y38.96506
G01 X125.91643 Y38.96506
G01 X125.93157 Y38.96488
G01 X125.97729 Y38.96376
G01 X125.99242 Y38.96358
G01 X126.13487 Y38.96358
G01 X126.15003 Y38.96341
G01 X126.20076 Y38.96224
G01 X126.21711 Y38.96206
G01 X126.36459 Y38.96206
G01 X126.38107 Y38.96188
G01 X126.44879 Y38.96051
G01 X126.46791 Y38.96033
G01 X126.60802 Y38.96031
G01 X126.62237 Y38.95264
G01 X126.70225 Y38.89927
G01 X126.82349 Y38.79978
G01 X126.89141 Y38.73186
G01 X126.99090 Y38.61063
G01 X127.04426 Y38.53074
G01 X127.11818 Y38.39244
G01 X127.15493 Y38.30369
G01 X127.20047 Y38.15363
G01 X127.21691 Y38.07072
G01 X127.21691 Y36.83971
G01 X127.20047 Y36.75701
G01 X127.15493 Y36.60692
G01 X127.11818 Y36.51817
G01 X127.04426 Y36.37987
G01 X126.99090 Y36.30001
G01 X126.97192 Y36.27690
G01 X126.89141 Y36.17878
G01 X126.82349 Y36.11086
G01 X126.78691 Y36.08086
G01 X126.78691 Y35.28427
G01 X127.18986 Y34.88132
G01 X127.97296 Y34.88135
G01 X128.65742 Y34.59783
G01 X128.67728 Y34.59016
G01 X128.74589 Y34.56560
G01 X128.77908 Y34.55552
G01 X128.84769 Y34.53835
G01 X128.87593 Y34.53271
G01 X128.94456 Y34.52252
G01 X128.97002 Y34.52001
G01 X129.03865 Y34.51663
G01 X129.05094 Y34.51635
G01 X131.88784 Y34.51635
G01 X131.90011 Y34.51604
G01 X131.96874 Y34.51267
G01 X131.99416 Y34.51015
G01 X132.06280 Y34.49997
G01 X132.07679 Y34.49755
G01 X132.08840 Y34.48937
G01 X132.14410 Y34.44805
G01 X132.16391 Y34.43182
G01 X132.21479 Y34.38567
G01 X132.22368 Y34.37721
G01 X134.89177 Y31.70912
G01 X134.90026 Y31.70025
G01 X134.94638 Y31.64935
G01 X134.96264 Y31.62954
G01 X135.00394 Y31.57384
G01 X135.01212 Y31.56220
G01 X135.01456 Y31.54823
G01 X135.02472 Y31.47963
G01 X135.02723 Y31.45415
G01 X135.03061 Y31.38552
G01 X135.03091 Y31.37323
G01 X135.03091 Y12.26930
G01 X135.03061 Y12.25701
G01 X135.02723 Y12.18840
G01 X135.02472 Y12.16295
G01 X135.01456 Y12.09435
G01 X135.01212 Y12.08038
G01 X135.00394 Y12.06874
G01 X134.96264 Y12.01304
G01 X134.94638 Y11.99323
G01 X134.90026 Y11.94233
G01 X134.89180 Y11.93346
G01 X133.67605 Y10.71769
G01 X133.66759 Y10.70880
G01 X133.62144 Y10.65793
G01 X133.60519 Y10.63811
G01 X133.56388 Y10.58241
G01 X133.54788 Y10.55843
G01 X133.51154 Y10.49778
G01 X133.49523 Y10.46720
G01 X133.46406 Y10.40131
G01 X133.45543 Y10.38183
G01 X133.17189 Y9.69732
G01 X133.01791 Y9.54335
G01 X132.98230 Y9.51107
G01 X132.92924 Y9.46753
G01 X132.84938 Y9.41416
G01 X132.84654 Y9.41267
G01 X132.84537 Y9.41284
G01 X132.76752 Y9.42171
G01 X132.67463 Y9.42897
G01 X132.60219 Y9.43151
G01 X132.59708 Y9.43146
G01 X132.52772 Y9.43393
G01 X132.51812 Y9.43471
G01 X132.45848 Y9.43713
G01 X132.42487 Y9.43708
G01 X132.09897 Y9.43708
G01 X132.07156 Y9.43654
G01 X132.04817 Y9.43563
G01 X131.92637 Y9.42029
G01 X131.84926 Y9.40390
G01 X131.63135 Y9.32524
G01 X131.59594 Y9.30718
G01 X131.59257 Y9.25806
G01 X131.59086 Y9.22669
G01 X131.58738 Y9.13644
G01 X131.59025 Y9.03001
G01 X131.59455 Y8.98493
G01 X131.59696 Y8.95176
G01 X131.59881 Y8.91422
G01 X131.60369 Y8.85938
G01 X131.60877 Y8.81965
G01 X131.61134 Y8.76773
G01 X131.61217 Y8.73332
G01 X131.61217 Y7.23332
G01 X131.61134 Y7.19895
G01 X131.60877 Y7.14699
G01 X131.59668 Y7.05265
G01 X131.58454 Y6.98473
G01 X131.58261 Y6.97627
G01 X131.54113 Y6.84424
G01 X131.52998 Y6.81163
G01 X131.51479 Y6.78067
G01 X131.45076 Y6.65799
G01 X131.44616 Y6.65064
G01 X131.40674 Y6.59405
G01 X131.35612 Y6.52852
G01 X131.33425 Y6.49865
G01 X131.31868 Y6.47615
G01 X131.31647 Y6.47300
G01 X131.27715 Y6.41684
G01 X131.23818 Y6.35539
G01 X131.19716 Y6.28379
G01 X131.19673 Y6.28303
G01 X131.16831 Y6.23332
G01 X131.19534 Y6.18199
G01 X131.25777 Y6.08087
G01 X131.27872 Y6.05181
G01 X131.30321 Y6.01572
G01 X131.31908 Y5.99083
G01 X131.35612 Y5.93812
G01 X131.40676 Y5.87254
G01 X131.44616 Y5.81600
G01 X131.45076 Y5.80866
G01 X131.51479 Y5.68598
G01 X131.52998 Y5.65502
G01 X131.54113 Y5.62240
G01 X131.58261 Y5.49037
G01 X131.58454 Y5.48191
G01 X131.59668 Y5.41402
G01 X131.60877 Y5.31966
G01 X131.61134 Y5.26774
G01 X131.61217 Y5.23335
G01 X131.61217 Y3.73333
G01 X131.61134 Y3.69891
G01 X131.60877 Y3.64699
G01 X131.59668 Y3.55263
G01 X131.58454 Y3.48474
G01 X131.58261 Y3.47628
G01 X131.54113 Y3.34425
G01 X131.52998 Y3.31164
G01 X131.51479 Y3.28067
G01 X131.45076 Y3.15799
G01 X131.44616 Y3.15065
G01 X131.40676 Y3.09411
G01 X131.34855 Y3.01877
G01 X131.31367 Y2.98027
G01 X131.26498 Y2.93158
G01 X131.22648 Y2.89670
G01 X131.15114 Y2.83849
G01 X131.09460 Y2.79909
G01 X131.08726 Y2.79449
G01 X130.96458 Y2.73046
G01 X130.93361 Y2.71527
G01 X130.90100 Y2.70412
G01 X130.76897 Y2.66264
G01 X130.76051 Y2.66071
G01 X130.69262 Y2.64857
G01 X130.59826 Y2.63648
G01 X130.54634 Y2.63391
G01 X130.47756 Y2.63391
G01 X130.42559 Y2.63648
G01 X130.33125 Y2.64857
G01 X130.26333 Y2.66071
G01 X130.25487 Y2.66264
G01 X130.12285 Y2.70412
G01 X130.09023 Y2.71527
G01 X130.05927 Y2.73046
G01 X129.93659 Y2.79449
G01 X129.92925 Y2.79909
G01 X129.87271 Y2.83849
G01 X129.79737 Y2.89670
G01 X129.75886 Y2.93158
G01 X129.71017 Y2.98027
G01 X129.67530 Y3.01877
G01 X129.61708 Y3.09411
G01 X129.57769 Y3.15065
G01 X129.57309 Y3.15799
G01 X129.50905 Y3.28067
G01 X129.49387 Y3.31164
G01 X129.48271 Y3.34425
G01 X129.44124 Y3.47628
G01 X129.43931 Y3.48474
G01 X129.42716 Y3.55263
G01 X129.41507 Y3.64699
G01 X129.41251 Y3.69891
G01 X129.41167 Y3.73333
G01 X129.41167 Y5.23335
G01 X129.41251 Y5.26774
G01 X129.41507 Y5.31966
G01 X129.42716 Y5.41402
G01 X129.43931 Y5.48191
G01 X129.44124 Y5.49037
G01 X129.48271 Y5.62240
G01 X129.49387 Y5.65502
G01 X129.50905 Y5.68598
G01 X129.57309 Y5.80866
G01 X129.57769 Y5.81600
G01 X129.61708 Y5.87254
G01 X129.66773 Y5.93812
G01 X129.68967 Y5.96812
G01 X129.70517 Y5.99050
G01 X129.74672 Y6.04988
G01 X129.78563 Y6.11125
G01 X129.82714 Y6.18367
G01 X129.85554 Y6.23332
G01 X129.82848 Y6.28471
G01 X129.76613 Y6.38575
G01 X129.74510 Y6.41488
G01 X129.72064 Y6.45090
G01 X129.70479 Y6.47582
G01 X129.66773 Y6.52857
G01 X129.61713 Y6.59405
G01 X129.57769 Y6.65064
G01 X129.57309 Y6.65799
G01 X129.50905 Y6.78067
G01 X129.49559 Y6.80792
G01 X129.49384 Y6.81166
G01 X129.48271 Y6.84424
G01 X129.44124 Y6.97627
G01 X129.43931 Y6.98473
G01 X129.42716 Y7.05265
G01 X129.41507 Y7.14699
G01 X129.41251 Y7.19895
G01 X129.41167 Y7.23332
G01 X129.41167 Y8.73332
G01 X129.41251 Y8.76773
G01 X129.41507 Y8.81965
G01 X129.42716 Y8.91401
G01 X129.43931 Y8.98191
G01 X129.44124 Y8.99037
G01 X129.48271 Y9.12239
G01 X129.49387 Y9.15501
G01 X129.50908 Y9.18602
G01 X129.57309 Y9.30863
G01 X129.57771 Y9.31602
G01 X129.61711 Y9.37253
G01 X129.67530 Y9.44790
G01 X129.71017 Y9.48638
G01 X129.74042 Y9.51775
G01 X129.75858 Y9.53542
G01 X129.78922 Y9.56720
G01 X129.81439 Y9.59496
G01 X129.82300 Y9.61455
G01 X129.82699 Y9.62326
G01 X129.84972 Y9.67921
G01 X129.85259 Y9.68719
G01 X129.85602 Y9.69656
G01 X129.87672 Y9.75196
G01 X129.88022 Y9.76148
G01 X129.90004 Y9.81686
G01 X129.92554 Y9.88826
G01 X129.94738 Y9.95910
G01 X129.95780 Y9.99890
G01 X129.95919 Y10.00408
G01 X129.98083 Y10.08490
G01 X129.98731 Y10.11510
G01 X129.96752 Y10.16943
G01 X129.92620 Y10.24101
G01 X129.84446 Y10.28335
G01 X129.76735 Y10.31531
G01 X129.56374 Y10.37086
G01 X129.48660 Y10.38102
G01 X129.39440 Y10.38709
G01 X128.53875 Y10.38709
G01 X128.49283 Y10.38559
G01 X128.45391 Y10.38302
G01 X128.34050 Y10.36646
G01 X128.31696 Y10.34914
G01 X128.25526 Y10.30179
G01 X128.18577 Y10.24088
G01 X127.96070 Y10.01584
G01 X127.91726 Y9.96821
G01 X127.88239 Y9.92628
G01 X127.78973 Y9.78480
G01 X127.76882 Y9.74381
G01 X127.76621 Y9.71043
G01 X127.76496 Y9.60230
G01 X127.78780 Y9.56283
G01 X127.81802 Y9.51371
G01 X127.82752 Y9.49783
G01 X127.85755 Y9.44624
G01 X127.90675 Y9.37258
G01 X127.90944 Y9.36905
G01 X127.94614 Y9.31602
G01 X127.95076 Y9.30865
G01 X128.01477 Y9.18602
G01 X128.02999 Y9.15503
G01 X128.04114 Y9.12234
G01 X128.08259 Y8.99037
G01 X128.08455 Y8.98183
G01 X128.09666 Y8.91406
G01 X128.10878 Y8.81963
G01 X128.11134 Y8.76779
G01 X128.11218 Y8.73332
G01 X128.11218 Y7.23332
G01 X128.11134 Y7.19888
G01 X128.10878 Y7.14701
G01 X128.09666 Y7.05257
G01 X128.08455 Y6.98478
G01 X128.08259 Y6.97627
G01 X128.04114 Y6.84432
G01 X128.02999 Y6.81160
G01 X128.01480 Y6.78067
G01 X127.95076 Y6.65801
G01 X127.94617 Y6.65064
G01 X127.90670 Y6.59403
G01 X127.85612 Y6.52857
G01 X127.83423 Y6.49865
G01 X127.81861 Y6.47612
G01 X127.81645 Y6.47300
G01 X127.77716 Y6.41689
G01 X127.73819 Y6.35539
G01 X127.69715 Y6.28379
G01 X127.69676 Y6.28308
G01 X127.66832 Y6.23332
G01 X127.69534 Y6.18194
G01 X127.75780 Y6.08077
G01 X127.77873 Y6.05179
G01 X127.80329 Y6.01562
G01 X127.81907 Y5.99085
G01 X127.85612 Y5.93812
G01 X127.90672 Y5.87259
G01 X127.94617 Y5.81600
G01 X127.95076 Y5.80866
G01 X128.01480 Y5.68598
G01 X128.02999 Y5.65504
G01 X128.04114 Y5.62233
G01 X128.08259 Y5.49037
G01 X128.08455 Y5.48186
G01 X128.09666 Y5.41407
G01 X128.10878 Y5.31963
G01 X128.11134 Y5.26779
G01 X128.11218 Y5.23335
G01 X128.11218 Y3.73333
G01 X128.11134 Y3.69886
G01 X128.10878 Y3.64702
G01 X128.09666 Y3.55258
G01 X128.08455 Y3.48479
G01 X128.08259 Y3.47628
G01 X128.04114 Y3.34433
G01 X128.02999 Y3.31161
G01 X128.01480 Y3.28067
G01 X127.95076 Y3.15799
G01 X127.94617 Y3.15065
G01 X127.90672 Y3.09406
G01 X127.84855 Y3.01877
G01 X127.81363 Y2.98024
G01 X127.76499 Y2.93160
G01 X127.72648 Y2.89670
G01 X127.65120 Y2.83851
G01 X127.59461 Y2.79909
G01 X127.58726 Y2.79449
G01 X127.46458 Y2.73046
G01 X127.43362 Y2.71527
G01 X127.40101 Y2.70412
G01 X127.26898 Y2.66264
G01 X127.26052 Y2.66071
G01 X127.19260 Y2.64857
G01 X127.09826 Y2.63648
G01 X127.04630 Y2.63391
G01 X126.97751 Y2.63391
G01 X126.92560 Y2.63648
G01 X126.83123 Y2.64857
G01 X126.76334 Y2.66071
G01 X126.75488 Y2.66264
G01 X126.62285 Y2.70412
G01 X126.59024 Y2.71527
G01 X126.55928 Y2.73046
G01 X126.43659 Y2.79449
G01 X126.42925 Y2.79909
G01 X126.37271 Y2.83849
G01 X126.29738 Y2.89670
G01 X126.25887 Y2.93158
G01 X126.21018 Y2.98027
G01 X126.17530 Y3.01877
G01 X126.11709 Y3.09411
G01 X126.07772 Y3.15060
G01 X126.07309 Y3.15799
G01 X126.00909 Y3.28065
G01 X125.99385 Y3.31164
G01 X125.98270 Y3.34433
G01 X125.94124 Y3.47628
G01 X125.93929 Y3.48479
G01 X125.92717 Y3.55263
G01 X125.91508 Y3.64699
G01 X125.91252 Y3.69891
G01 X125.91168 Y3.73333
G01 X125.91168 Y5.23335
G01 X125.91252 Y5.26774
G01 X125.91508 Y5.31966
G01 X125.92717 Y5.41402
G01 X125.93929 Y5.48186
G01 X125.94124 Y5.49037
G01 X125.98270 Y5.62233
G01 X125.99385 Y5.65502
G01 X126.00909 Y5.68600
G01 X126.07309 Y5.80866
G01 X126.07772 Y5.81605
G01 X126.11709 Y5.87254
G01 X126.16774 Y5.93812
G01 X126.18968 Y5.96812
G01 X126.20517 Y5.99050
G01 X126.24673 Y6.04988
G01 X126.28564 Y6.11125
G01 X126.32715 Y6.18367
G01 X126.35554 Y6.23332
G01 X126.32849 Y6.28471
G01 X126.26613 Y6.38575
G01 X126.24510 Y6.41488
G01 X126.22064 Y6.45090
G01 X126.20479 Y6.47582
G01 X126.16774 Y6.52857
G01 X126.11714 Y6.59405
G01 X126.07772 Y6.65062
G01 X126.07309 Y6.65799
G01 X126.00909 Y6.78064
G01 X125.99557 Y6.80790
G01 X125.99385 Y6.81166
G01 X125.98270 Y6.84432
G01 X125.94124 Y6.97627
G01 X125.93929 Y6.98478
G01 X125.92717 Y7.05265
G01 X125.91508 Y7.14699
G01 X125.91252 Y7.19895
G01 X125.91168 Y7.23332
G01 X125.91168 Y8.73332
G01 X125.91252 Y8.76773
G01 X125.91508 Y8.81965
G01 X125.92717 Y8.91401
G01 X125.93929 Y8.98183
G01 X125.94124 Y8.99037
G01 X125.98270 Y9.12234
G01 X125.99385 Y9.15501
G01 X126.00909 Y9.18605
G01 X126.07309 Y9.30865
G01 X126.07774 Y9.31604
G01 X126.11709 Y9.37253
G01 X126.17607 Y9.44886
G01 X126.19819 Y9.47540
G01 X126.20820 Y9.48800
G01 X126.22268 Y9.50566
G01 X126.25333 Y9.54185
G01 X126.28930 Y9.58785
G01 X126.29545 Y9.62651
G01 X126.30558 Y9.70362
G01 X126.31168 Y9.79588
G01 X126.31168 Y10.05734
G01 X126.31252 Y10.09176
G01 X126.31419 Y10.12605
G01 X126.31925 Y10.16006
G01 X126.33266 Y10.22752
G01 X126.34099 Y10.26082
G01 X126.35257 Y10.29318
G01 X126.37891 Y10.35676
G01 X126.39359 Y10.38782
G01 X126.41124 Y10.41726
G01 X126.44952 Y10.47454
G01 X126.46997 Y10.50210
G01 X126.49306 Y10.52757
G01 X126.51511 Y10.55081
G01 X126.51676 Y10.55249
G01 X126.54645 Y10.58429
G01 X126.57213 Y10.61358
G01 X126.65633 Y10.73146
G01 X126.69628 Y10.80065
G01 X126.78597 Y11.02165
G01 X126.78437 Y11.03067
G01 X126.76441 Y11.10517
G01 X126.73520 Y11.18543
G01 X126.69633 Y11.25274
G01 X126.61213 Y11.29935
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.02994 Y11.26334 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.02994 Y11.26334
G01 X126.78437 Y11.01772
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.74793 Y12.94334 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.74793 Y12.94334
G01 X124.72804 Y12.97309
G01 X124.64950 Y13.12005
G01 X124.61694 Y13.19864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.61694 Y14.40394 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.61694 Y14.40394
G01 X124.64950 Y14.48258
G01 X124.72804 Y14.62952
G01 X124.78140 Y14.70940
G01 X124.86192 Y14.80750
G01 X124.88712 Y14.83821
G01 X124.95504 Y14.90613
G01 X125.08384 Y15.01184
G01 X125.16372 Y15.06521
G01 X125.31066 Y15.14374
G01 X125.39941 Y15.18052
G01 X125.55887 Y15.22889
G01 X125.65308 Y15.24763
G01 X125.81892 Y15.26396
G01 X125.91495 Y15.26396
G01 X126.08079 Y15.24763
G01 X126.17500 Y15.22889
G01 X126.33446 Y15.18052
G01 X126.42321 Y15.14374
G01 X126.57015 Y15.06521
G01 X126.65003 Y15.01184
G01 X126.77883 Y14.90613
G01 X126.84675 Y14.83821
G01 X126.95247 Y14.70940
G01 X127.00583 Y14.62952
G01 X127.08437 Y14.48258
G01 X127.11693 Y14.40397
G01 X127.11693 Y13.19864
G01 X127.08437 Y13.12005
G01 X127.00583 Y12.97309
G01 X126.98589 Y12.94332
G01 X126.92877 Y12.91271
G01 X126.76217 Y12.83389
G01 X126.69049 Y12.80412
G01 X126.52384 Y12.74449
G01 X126.46845 Y12.72765
G01 X126.30185 Y12.68591
G01 X126.25712 Y12.67700
G01 X126.09049 Y12.65228
G01 X126.05189 Y12.64847
G01 X125.88526 Y12.64029
G01 X125.84861 Y12.64029
G01 X125.68199 Y12.64847
G01 X125.64335 Y12.65228
G01 X125.47673 Y12.67700
G01 X125.43200 Y12.68591
G01 X125.26540 Y12.72765
G01 X125.20998 Y12.74451
G01 X125.04335 Y12.80412
G01 X124.97175 Y12.83387
G01 X124.80513 Y12.91268
G01 X124.74793 Y12.94334
G01 X124.52794 Y12.94332
G01 X124.48689 Y12.94131
G01 X124.48303 Y12.93897
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X123.59428 Y12.35769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X123.59428 Y12.35769
G01 X123.42050 Y12.18383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X123.32220 Y12.37248 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X123.32220 Y12.37248
G01 X123.37592 Y12.33867
G01 X123.41496 Y12.33867
G01 X123.58080 Y12.35500
G01 X123.59428 Y12.35769
G01 X123.66792 Y12.39699
G01 X123.81526 Y12.48528
G01 X123.88440 Y12.53143
G01 X124.00810 Y12.62315
G01 X124.01976 Y12.63166
G01 X124.03878 Y12.64520
G01 X124.07968 Y12.67652
G01 X124.09291 Y12.68739
G01 X124.15303 Y12.73196
G01 X124.21036 Y12.77027
G01 X124.21549 Y12.77367
G01 X124.27655 Y12.81378
G01 X124.28209 Y12.81746
G01 X124.33619 Y12.85358
G01 X124.41488 Y12.90064
G01 X124.43213 Y12.90989
G01 X124.48024 Y12.93727
G01 X124.48303 Y12.93897
G01 X124.50584 Y12.97309
G01 X124.58438 Y13.12005
G01 X124.61694 Y13.19864
G01 X124.61694 Y14.40394
G01 X124.58438 Y14.48258
G01 X124.50584 Y14.62952
G01 X124.45247 Y14.70940
G01 X124.34676 Y14.83821
G01 X124.27884 Y14.90613
G01 X124.15004 Y15.01184
G01 X124.07015 Y15.06521
G01 X123.92321 Y15.14374
G01 X123.83447 Y15.18052
G01 X123.67500 Y15.22889
G01 X123.58080 Y15.24763
G01 X123.41496 Y15.26396
G01 X123.31890 Y15.26396
G01 X123.15309 Y15.24763
G01 X123.05888 Y15.22889
G01 X122.89942 Y15.18052
G01 X122.81067 Y15.14374
G01 X122.66373 Y15.06521
G01 X122.58385 Y15.01184
G01 X122.45504 Y14.90613
G01 X122.38712 Y14.83821
G01 X122.36193 Y14.80750
G01 X122.28141 Y14.70940
G01 X122.22804 Y14.62952
G01 X122.14951 Y14.48258
G01 X122.11692 Y14.40392
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.11692 Y13.19861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.11692 Y13.19861
G01 X122.13505 Y13.15492
G01 X122.15547 Y13.14161
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.09883 Y13.15495 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.09883 Y13.15495
G01 X122.11692 Y13.19861
G01 X122.11692 Y14.40392
G01 X122.08438 Y14.48258
G01 X122.00582 Y14.62952
G01 X121.95245 Y14.70940
G01 X121.84676 Y14.83821
G01 X121.77882 Y14.90613
G01 X121.65001 Y15.01184
G01 X121.57016 Y15.06521
G01 X121.42319 Y15.14374
G01 X121.33445 Y15.18052
G01 X121.17501 Y15.22889
G01 X121.08080 Y15.24763
G01 X120.91496 Y15.26396
G01 X120.81890 Y15.26396
G01 X120.65309 Y15.24763
G01 X120.55888 Y15.22889
G01 X120.39942 Y15.18052
G01 X120.31067 Y15.14374
G01 X120.16371 Y15.06521
G01 X120.08385 Y15.01184
G01 X119.95505 Y14.90613
G01 X119.88713 Y14.83821
G01 X119.86193 Y14.80750
G01 X119.78141 Y14.70940
G01 X119.72805 Y14.62952
G01 X119.64949 Y14.48258
G01 X119.61692 Y14.40394
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.11693 Y14.40394 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.11693 Y14.40394
G01 X117.14949 Y14.48258
G01 X117.22805 Y14.62952
G01 X117.28142 Y14.70940
G01 X117.36194 Y14.80750
G01 X117.38713 Y14.83821
G01 X117.45505 Y14.90613
G01 X117.58386 Y15.01184
G01 X117.66371 Y15.06521
G01 X117.81068 Y15.14374
G01 X117.89943 Y15.18052
G01 X118.05886 Y15.22889
G01 X118.15307 Y15.24763
G01 X118.31891 Y15.26396
G01 X118.41497 Y15.26396
G01 X118.58078 Y15.24763
G01 X118.67501 Y15.22889
G01 X118.83445 Y15.18052
G01 X118.92320 Y15.14374
G01 X119.07016 Y15.06521
G01 X119.15002 Y15.01184
G01 X119.27882 Y14.90613
G01 X119.34674 Y14.83821
G01 X119.45246 Y14.70940
G01 X119.50582 Y14.62952
G01 X119.58439 Y14.48258
G01 X119.61692 Y14.40394
G01 X119.61692 Y14.21847
G01 X119.61695 Y14.13315
G01 X119.61695 Y13.46948
G01 X119.61692 Y13.38413
G01 X119.61692 Y13.19861
G01 X119.58439 Y13.12005
G01 X119.50582 Y12.97309
G01 X119.45256 Y12.89338
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.61692 Y13.19861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.61692 Y13.19861
G01 X119.64949 Y13.12005
G01 X119.72805 Y12.97309
G01 X119.78141 Y12.89323
G01 X119.88713 Y12.76442
G01 X119.95505 Y12.69650
G01 X120.08385 Y12.59079
G01 X120.16371 Y12.53742
G01 X120.31067 Y12.45886
G01 X120.39942 Y12.42211
G01 X120.42873 Y12.41322
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X120.27422 Y12.08396 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X120.27422 Y12.08396
G01 X119.53790 Y12.82028
G01 X119.50227 Y12.85259
G01 X119.45256 Y12.89338
G01 X119.44656 Y12.89280
G01 X119.32990 Y12.87575
G01 X119.24288 Y12.85843
G01 X119.23430 Y12.85668
G01 X119.16668 Y12.84255
G01 X119.16008 Y12.84121
G01 X119.09038 Y12.82734
G01 X119.03630 Y12.81385
G01 X118.98078 Y12.79701
G01 X118.96526 Y12.79259
G01 X118.94395 Y12.78690
G01 X118.93765 Y12.78528
G01 X118.77100 Y12.74355
G01 X118.73887 Y12.73714
G01 X118.57227 Y12.71243
G01 X118.54586 Y12.70981
G01 X118.37921 Y12.70164
G01 X118.35464 Y12.70164
G01 X118.18799 Y12.70981
G01 X118.16158 Y12.71243
G01 X117.99498 Y12.73714
G01 X117.96285 Y12.74355
G01 X117.79620 Y12.78528
G01 X117.75399 Y12.79813
G01 X117.58734 Y12.85774
G01 X117.52991 Y12.88159
G01 X117.36328 Y12.96041
G01 X117.28386 Y13.00298
G01 X117.17822 Y13.06633
G01 X117.05561 Y13.06630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.17822 Y13.06633 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.17822 Y13.06633
G01 X117.14949 Y13.12005
G01 X117.11693 Y13.19864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.47635 Y10.43634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.47635 Y10.43634
G01 X113.57952 Y10.33316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.78376 Y10.50324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.78376 Y10.50324
G01 X113.62615 Y10.42724
G01 X113.58856 Y10.35501
G01 X113.57952 Y10.33316
G01 X113.58826 Y10.28919
G01 X113.59189 Y10.27014
G01 X113.59768 Y10.23801
G01 X113.61437 Y10.16296
G01 X113.63520 Y10.08488
G01 X113.64597 Y10.04817
G01 X113.65564 Y10.01802
G01 X113.65925 Y10.00652
G01 X113.67416 Y9.94957
G01 X113.67812 Y9.93512
G01 X113.68562 Y9.90522
G01 X113.69115 Y9.88302
G01 X113.70459 Y9.81556
G01 X113.70990 Y9.77967
G01 X113.71269 Y9.74980
G01 X113.71297 Y9.74744
G01 X113.71610 Y9.71282
G01 X113.71622 Y9.71101
G01 X113.73499 Y9.58810
G01 X113.74777 Y9.57264
G01 X113.77220 Y9.54383
G01 X113.79750 Y9.51228
G01 X113.81579 Y9.48813
G01 X113.84769 Y9.44896
G01 X113.90675 Y9.37256
G01 X113.94612 Y9.31607
G01 X113.95077 Y9.30863
G01 X114.01475 Y9.18605
G01 X114.02999 Y9.15503
G01 X114.04114 Y9.12234
G01 X114.08259 Y8.99037
G01 X114.08455 Y8.98183
G01 X114.09666 Y8.91406
G01 X114.10878 Y8.81963
G01 X114.11135 Y8.76779
G01 X114.11218 Y8.73332
G01 X114.11218 Y7.23332
G01 X114.11135 Y7.19888
G01 X114.10878 Y7.14701
G01 X114.09666 Y7.05257
G01 X114.08455 Y6.98478
G01 X114.08259 Y6.97627
G01 X114.04114 Y6.84432
G01 X114.02999 Y6.81160
G01 X114.01477 Y6.78062
G01 X113.95077 Y6.65801
G01 X113.94612 Y6.65059
G01 X113.90672 Y6.59405
G01 X113.85610 Y6.52857
G01 X113.83423 Y6.49865
G01 X113.81866 Y6.47615
G01 X113.81645 Y6.47300
G01 X113.77716 Y6.41689
G01 X113.73819 Y6.35539
G01 X113.69715 Y6.28379
G01 X113.69677 Y6.28308
G01 X113.66832 Y6.23332
G01 X113.69534 Y6.18194
G01 X113.75775 Y6.08087
G01 X113.77873 Y6.05179
G01 X113.80319 Y6.01572
G01 X113.81907 Y5.99083
G01 X113.85613 Y5.93807
G01 X113.90675 Y5.87257
G01 X113.94612 Y5.81605
G01 X113.95077 Y5.80863
G01 X114.01477 Y5.68603
G01 X114.02999 Y5.65504
G01 X114.04114 Y5.62233
G01 X114.08259 Y5.49037
G01 X114.08455 Y5.48186
G01 X114.09666 Y5.41407
G01 X114.10878 Y5.31963
G01 X114.11135 Y5.26779
G01 X114.11218 Y5.23335
G01 X114.11218 Y3.73333
G01 X114.11135 Y3.69886
G01 X114.10878 Y3.64702
G01 X114.09666 Y3.55258
G01 X114.08455 Y3.48479
G01 X114.08259 Y3.47628
G01 X114.04114 Y3.34433
G01 X114.02999 Y3.31161
G01 X114.01477 Y3.28062
G01 X113.95077 Y3.15802
G01 X113.94612 Y3.15060
G01 X113.90675 Y3.09409
G01 X113.84856 Y3.01877
G01 X113.81366 Y2.98027
G01 X113.76499 Y2.93160
G01 X113.72648 Y2.89668
G01 X113.65117 Y2.83854
G01 X113.59461 Y2.79909
G01 X113.58724 Y2.79449
G01 X113.46459 Y2.73046
G01 X113.43360 Y2.71524
G01 X113.40101 Y2.70412
G01 X113.26898 Y2.66264
G01 X113.26052 Y2.66071
G01 X113.19260 Y2.64857
G01 X113.09824 Y2.63648
G01 X113.04630 Y2.63391
G01 X112.97752 Y2.63391
G01 X112.92560 Y2.63648
G01 X112.83124 Y2.64857
G01 X112.76334 Y2.66071
G01 X112.75488 Y2.66264
G01 X112.62285 Y2.70412
G01 X112.59024 Y2.71527
G01 X112.55923 Y2.73048
G01 X112.43660 Y2.79449
G01 X112.42923 Y2.79912
G01 X112.37272 Y2.83849
G01 X112.29738 Y2.89670
G01 X112.25887 Y2.93158
G01 X112.21018 Y2.98027
G01 X112.17531 Y3.01877
G01 X112.11709 Y3.09411
G01 X112.07772 Y3.15060
G01 X112.07310 Y3.15799
G01 X112.00909 Y3.28065
G01 X111.99385 Y3.31164
G01 X111.98270 Y3.34433
G01 X111.94125 Y3.47628
G01 X111.93929 Y3.48479
G01 X111.92717 Y3.55263
G01 X111.91508 Y3.64699
G01 X111.91252 Y3.69891
G01 X111.91168 Y3.73333
G01 X111.91168 Y5.23335
G01 X111.91252 Y5.26774
G01 X111.91508 Y5.31966
G01 X111.92717 Y5.41402
G01 X111.93929 Y5.48186
G01 X111.94125 Y5.49037
G01 X111.98270 Y5.62233
G01 X111.99385 Y5.65502
G01 X112.00909 Y5.68600
G01 X112.07310 Y5.80866
G01 X112.07772 Y5.81605
G01 X112.11709 Y5.87254
G01 X112.16774 Y5.93812
G01 X112.18968 Y5.96812
G01 X112.20518 Y5.99050
G01 X112.24673 Y6.04988
G01 X112.28564 Y6.11125
G01 X112.32715 Y6.18367
G01 X112.35555 Y6.23332
G01 X112.32849 Y6.28471
G01 X112.26614 Y6.38575
G01 X112.24511 Y6.41488
G01 X112.22065 Y6.45090
G01 X112.20480 Y6.47582
G01 X112.16774 Y6.52857
G01 X112.11714 Y6.59405
G01 X112.07772 Y6.65062
G01 X112.07310 Y6.65799
G01 X112.00909 Y6.78064
G01 X111.99558 Y6.80790
G01 X111.99385 Y6.81166
G01 X111.98270 Y6.84432
G01 X111.94125 Y6.97627
G01 X111.93929 Y6.98478
G01 X111.92717 Y7.05265
G01 X111.91508 Y7.14699
G01 X111.91252 Y7.19895
G01 X111.91168 Y7.23332
G01 X111.91168 Y8.73332
G01 X111.91252 Y8.76773
G01 X111.91508 Y8.81965
G01 X111.92717 Y8.91401
G01 X111.93929 Y8.98183
G01 X111.94254 Y8.99595
G01 X111.94993 Y9.02534
G01 X111.96040 Y9.07088
G01 X111.97081 Y9.12595
G01 X111.98196 Y9.20055
G01 X111.98565 Y9.22831
G01 X111.99512 Y9.31068
G01 X111.99934 Y9.35798
G01 X112.00556 Y9.45483
G01 X112.00957 Y9.46085
G01 X112.03048 Y9.48633
G01 X111.98341 Y9.48633
G01 X111.90802 Y9.52234
G01 X111.83091 Y9.55430
G01 X111.62733 Y9.60985
G01 X111.55021 Y9.62001
G01 X111.45796 Y9.62608
G01 X111.06589 Y9.62608
G01 X111.01074 Y9.62392
G01 X110.96413 Y9.62023
G01 X110.81018 Y9.59138
G01 X110.73304 Y9.56852
G01 X110.54585 Y9.48633
G01 X110.49340 Y9.48633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X110.52111 Y9.44779 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X110.52111 Y9.44779
G01 X110.52078 Y9.45115
G01 X110.52067 Y9.45239
G01 X110.54039 Y9.48391
G01 X110.73304 Y9.56852
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.90802 Y9.52234 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.90802 Y9.52234
G01 X111.98620 Y9.48498
G01 X111.98839 Y9.48239
G01 X112.00543 Y9.45287
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.17823 Y13.06630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.17823 Y13.06630
G01 X112.14950 Y13.12005
G01 X112.11691 Y13.19864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.05562 Y13.06630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.05562 Y13.06630
G01 X112.17823 Y13.06630
G01 X112.28394 Y13.00296
G01 X112.36329 Y12.96041
G01 X112.52992 Y12.88159
G01 X112.58735 Y12.85774
G01 X112.75400 Y12.79813
G01 X112.79621 Y12.78528
G01 X112.96281 Y12.74355
G01 X112.99496 Y12.73714
G01 X113.16159 Y12.71243
G01 X113.18801 Y12.70981
G01 X113.35465 Y12.70164
G01 X113.37922 Y12.70164
G01 X113.54584 Y12.70981
G01 X113.57226 Y12.71243
G01 X113.73888 Y12.73714
G01 X113.77104 Y12.74355
G01 X113.93764 Y12.78528
G01 X113.97985 Y12.79811
G01 X114.14650 Y12.85774
G01 X114.20398 Y12.88162
G01 X114.37060 Y12.96044
G01 X114.44990 Y13.00296
G01 X114.55562 Y13.06630
G01 X114.67822 Y13.06633
G01 X114.78386 Y13.00298
G01 X114.86329 Y12.96041
G01 X115.02991 Y12.88159
G01 X115.08734 Y12.85774
G01 X115.25399 Y12.79813
G01 X115.29620 Y12.78528
G01 X115.46280 Y12.74355
G01 X115.49496 Y12.73714
G01 X115.66158 Y12.71243
G01 X115.68800 Y12.70981
G01 X115.85465 Y12.70164
G01 X115.87921 Y12.70164
G01 X116.04584 Y12.70981
G01 X116.07225 Y12.71243
G01 X116.23888 Y12.73714
G01 X116.27101 Y12.74355
G01 X116.43766 Y12.78528
G01 X116.47987 Y12.79813
G01 X116.64652 Y12.85774
G01 X116.70395 Y12.88159
G01 X116.87057 Y12.96041
G01 X116.95000 Y13.00298
G01 X117.05561 Y13.06630
G01 X117.08436 Y13.12005
G01 X117.11693 Y13.19864
G01 X117.11693 Y14.40394
G01 X117.08436 Y14.48258
G01 X117.00583 Y14.62952
G01 X116.95246 Y14.70940
G01 X116.84675 Y14.83821
G01 X116.77883 Y14.90613
G01 X116.65002 Y15.01184
G01 X116.57017 Y15.06521
G01 X116.42320 Y15.14374
G01 X116.33446 Y15.18052
G01 X116.17499 Y15.22889
G01 X116.08079 Y15.24763
G01 X115.91497 Y15.26396
G01 X115.81891 Y15.26396
G01 X115.65307 Y15.24763
G01 X115.55887 Y15.22889
G01 X115.39941 Y15.18052
G01 X115.31068 Y15.14374
G01 X115.16372 Y15.06521
G01 X115.08386 Y15.01184
G01 X114.95503 Y14.90613
G01 X114.88711 Y14.83821
G01 X114.78142 Y14.70940
G01 X114.72806 Y14.62952
G01 X114.64950 Y14.48258
G01 X114.61693 Y14.40397
G01 X114.61693 Y13.19864
G01 X114.58437 Y13.12005
G01 X114.55562 Y13.06630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.61693 Y13.19864 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.61693 Y13.19864
G01 X114.64950 Y13.12005
G01 X114.67822 Y13.06633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X116.39986 Y11.38632 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X116.39986 Y11.38632
G01 X116.74718 Y11.38632
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X116.66986 Y11.06537 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X116.66986 Y11.06537
G01 X116.64934 Y11.13687
G01 X116.64931 Y11.13687
G01 X116.39986 Y11.38632
G01 X115.71541 Y11.66984
G01 X115.69554 Y11.67751
G01 X115.62694 Y11.70207
G01 X115.59374 Y11.71215
G01 X115.52514 Y11.72932
G01 X115.49689 Y11.73496
G01 X115.42826 Y11.74515
G01 X115.40283 Y11.74766
G01 X115.33420 Y11.75104
G01 X115.32194 Y11.75135
G01 X109.92692 Y11.75135
G01 X109.91466 Y11.75163
G01 X109.84603 Y11.75500
G01 X109.82057 Y11.75752
G01 X109.75194 Y11.76770
G01 X109.73792 Y11.77014
G01 X109.72634 Y11.77829
G01 X109.67064 Y11.81960
G01 X109.65083 Y11.83585
G01 X109.59992 Y11.88198
G01 X109.59106 Y11.89044
G01 X108.95205 Y12.52945
G01 X108.94356 Y12.53834
G01 X108.89744 Y12.58924
G01 X108.88118 Y12.60905
G01 X108.83988 Y12.66476
G01 X108.83170 Y12.67639
G01 X108.82926 Y12.69036
G01 X108.81910 Y12.75896
G01 X108.81659 Y12.78441
G01 X108.81321 Y12.85302
G01 X108.81291 Y12.86531
G01 X108.81291 Y29.97585
G01 X108.81321 Y29.98811
G01 X108.81659 Y30.05674
G01 X108.81910 Y30.08222
G01 X108.82926 Y30.15083
G01 X108.83170 Y30.16480
G01 X108.83988 Y30.17643
G01 X108.88118 Y30.23213
G01 X108.89744 Y30.25194
G01 X108.94356 Y30.30285
G01 X108.95205 Y30.31174
G01 X111.17353 Y32.53322
G01 X111.18242 Y32.54168
G01 X111.23332 Y32.58780
G01 X111.25313 Y32.60406
G01 X111.30884 Y32.64536
G01 X111.32044 Y32.65354
G01 X111.33444 Y32.65598
G01 X111.40305 Y32.66614
G01 X111.42852 Y32.66865
G01 X111.49715 Y32.67203
G01 X111.50942 Y32.67234
G01 X114.01993 Y32.67234
G01 X114.03222 Y32.67264
G01 X114.10083 Y32.67602
G01 X114.12628 Y32.67853
G01 X114.19489 Y32.68869
G01 X114.22313 Y32.69433
G01 X114.29174 Y32.71153
G01 X114.32493 Y32.72161
G01 X114.39354 Y32.74617
G01 X114.41340 Y32.75384
G01 X115.09781 Y33.03731
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.50281 Y33.98732 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.50281 Y33.98732
G01 X113.67198 Y33.98732
G01 X114.94693 Y35.26227
G01 X114.94693 Y36.08089
G01 X114.91040 Y36.11086
G01 X114.84248 Y36.17878
G01 X114.74299 Y36.30001
G01 X114.68963 Y36.37987
G01 X114.61569 Y36.51817
G01 X114.57893 Y36.60692
G01 X114.53342 Y36.75701
G01 X114.51691 Y36.83971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.51691 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.51691 Y38.07072
G01 X114.53342 Y38.15363
G01 X114.57893 Y38.30369
G01 X114.61569 Y38.39244
G01 X114.68963 Y38.53074
G01 X114.74299 Y38.61063
G01 X114.84248 Y38.73186
G01 X114.90451 Y38.79389
G01 X114.91335 Y38.79615
G01 X115.00195 Y38.82325
G01 X115.07312 Y38.84873
G01 X115.15386 Y38.87329
G01 X115.31068 Y38.91258
G01 X115.38010 Y38.92642
G01 X115.53695 Y38.94967
G01 X115.59976 Y38.95586
G01 X115.75655 Y38.96358
G01 X115.81726 Y38.96358
G01 X115.97411 Y38.95586
G01 X116.03695 Y38.94967
G01 X116.19376 Y38.92640
G01 X116.26316 Y38.91258
G01 X116.41998 Y38.87329
G01 X116.50072 Y38.84873
G01 X116.60192 Y38.81251
G01 X116.65876 Y38.79407
G01 X116.67197 Y38.79020
G01 X116.67200 Y38.79020
G01 X116.69752 Y38.79272
G01 X116.78945 Y38.82061
G01 X116.87415 Y38.86590
G01 X116.94842 Y38.92683
G01 X117.00936 Y39.00108
G01 X117.05465 Y39.08581
G01 X117.08251 Y39.17771
G01 X117.09193 Y39.27331
G01 X117.09191 Y39.76343
G01 X117.09013 Y39.77555
G01 X117.08076 Y39.87031
G01 X117.07306 Y40.02716
G01 X117.07194 Y40.07331
G01 X117.07194 Y40.87331
G01 X117.07306 Y40.91949
G01 X117.08076 Y41.07633
G01 X117.09013 Y41.17110
G01 X117.09191 Y41.18319
G01 X117.09191 Y41.56361
G01 X117.09193 Y41.56363
G01 X117.01637 Y41.67290
G01 X117.01594 Y41.67333
G01 X116.60194 Y41.88032
G01 X115.00195 Y41.88032
G01 X114.65592 Y41.73574
G01 X114.65491 Y41.73152
G01 X114.65287 Y41.71402
G01 X114.65168 Y41.67333
G01 X114.65168 Y39.27331
G01 X114.65265 Y39.23633
G01 X114.65770 Y39.14088
G01 X114.66628 Y39.05871
G01 X114.69148 Y38.89577
G01 X114.68290 Y38.88086
G01 X114.62803 Y38.81545
G01 X114.57350 Y38.76089
G01 X114.50802 Y38.70593
G01 X114.43395 Y38.66318
G01 X114.35361 Y38.63394
G01 X114.28648 Y38.61599
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.66628 Y39.05871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.66628 Y39.05871
G01 X114.69123 Y38.89747
G01 X114.72971 Y38.86590
G01 X114.81442 Y38.82061
G01 X114.90344 Y38.79361
G01 X114.90449 Y38.79386
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.05693 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.05693 Y36.83971
G01 X117.07342 Y36.75701
G01 X117.11893 Y36.60692
G01 X117.15569 Y36.51817
G01 X117.22963 Y36.37987
G01 X117.28299 Y36.30001
G01 X117.38248 Y36.17878
G01 X117.45040 Y36.11086
G01 X117.48693 Y36.08089
G01 X117.48693 Y33.86527
G01 X116.65899 Y33.03731
G01 X115.09781 Y33.03731
G01 X116.38089 Y34.32036
G01 X116.41320 Y34.35600
G01 X116.45671 Y34.40903
G01 X116.51007 Y34.48889
G01 X116.54243 Y34.54939
G01 X116.57918 Y34.63814
G01 X116.59910 Y34.70380
G01 X116.61784 Y34.79801
G01 X116.62455 Y34.86631
G01 X116.62691 Y34.91432
G01 X116.62691 Y36.08086
G01 X116.66349 Y36.11086
G01 X116.73141 Y36.17878
G01 X116.81192 Y36.27690
G01 X116.83090 Y36.30001
G01 X116.88426 Y36.37987
G01 X116.95818 Y36.51817
G01 X116.99493 Y36.60692
G01 X117.04047 Y36.75701
G01 X117.05693 Y36.83971
G01 X117.05693 Y38.07072
G01 X117.04047 Y38.15363
G01 X116.99493 Y38.30369
G01 X116.95818 Y38.39244
G01 X116.88426 Y38.53074
G01 X116.83090 Y38.61063
G01 X116.73141 Y38.73186
G01 X116.67349 Y38.78977
G01 X116.67200 Y38.79020
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.05693 Y38.07072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.05693 Y38.07072
G01 X117.07342 Y38.15363
G01 X117.11893 Y38.30369
G01 X117.15569 Y38.39244
G01 X117.22963 Y38.53074
G01 X117.28299 Y38.61063
G01 X117.38248 Y38.73186
G01 X117.45040 Y38.79978
G01 X117.57164 Y38.89927
G01 X117.65150 Y38.95264
G01 X117.68083 Y38.96833
G01 X117.82086 Y38.96833
G01 X117.84017 Y38.96816
G01 X117.90786 Y38.96679
G01 X117.92422 Y38.96661
G01 X118.07179 Y38.96661
G01 X118.08805 Y38.96640
G01 X118.13882 Y38.96524
G01 X118.15398 Y38.96506
G01 X118.29643 Y38.96506
G01 X118.31157 Y38.96488
G01 X118.35729 Y38.96376
G01 X118.37242 Y38.96358
G01 X118.51487 Y38.96358
G01 X118.53003 Y38.96341
G01 X118.58076 Y38.96224
G01 X118.59711 Y38.96206
G01 X118.74459 Y38.96206
G01 X118.76107 Y38.96188
G01 X118.82879 Y38.96051
G01 X118.84791 Y38.96033
G01 X118.98802 Y38.96031
G01 X119.00237 Y38.95264
G01 X119.08225 Y38.89927
G01 X119.20349 Y38.79978
G01 X119.27141 Y38.73186
G01 X119.37090 Y38.61063
G01 X119.42426 Y38.53074
G01 X119.49818 Y38.39244
G01 X119.53493 Y38.30369
G01 X119.58047 Y38.15363
G01 X119.59693 Y38.07072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.59693 Y36.83971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.59693 Y36.83971
G01 X119.61342 Y36.75701
G01 X119.65893 Y36.60692
G01 X119.69569 Y36.51817
G01 X119.76963 Y36.37987
G01 X119.82299 Y36.30001
G01 X119.92248 Y36.17878
G01 X119.99040 Y36.11086
G01 X120.02693 Y36.08089
G01 X120.02693 Y33.54432
G01 X120.02929 Y33.49631
G01 X120.03600 Y33.42801
G01 X120.05474 Y33.33380
G01 X120.07466 Y33.26814
G01 X120.11141 Y33.17940
G01 X120.14377 Y33.11889
G01 X120.19714 Y33.03903
G01 X120.24065 Y32.98600
G01 X120.27295 Y32.95036
G01 X121.68095 Y31.54237
G01 X121.71659 Y31.51006
G01 X121.76962 Y31.46655
G01 X121.84948 Y31.41318
G01 X121.90998 Y31.38082
G01 X121.99873 Y31.34407
G01 X122.06439 Y31.32415
G01 X122.15860 Y31.30541
G01 X122.22690 Y31.29870
G01 X122.27493 Y31.29634
G01 X122.67711 Y31.29634
G01 X122.74054 Y31.31562
G01 X122.89736 Y31.35491
G01 X122.98037 Y31.37147
G01 X123.13721 Y31.39472
G01 X123.21323 Y31.40223
G01 X123.37003 Y31.40993
G01 X123.44381 Y31.40993
G01 X123.60063 Y31.40223
G01 X123.67668 Y31.39472
G01 X123.83350 Y31.37145
G01 X123.91648 Y31.35491
G01 X124.07330 Y31.31562
G01 X124.13670 Y31.29634
G01 X124.16225 Y31.27927
G01 X124.28349 Y31.17978
G01 X124.35141 Y31.11186
G01 X124.45090 Y30.99063
G01 X124.50426 Y30.91074
G01 X124.57818 Y30.77244
G01 X124.61493 Y30.68369
G01 X124.66047 Y30.53363
G01 X124.67693 Y30.45072
G01 X124.67693 Y29.21971
G01 X124.66047 Y29.13701
G01 X124.61493 Y28.98692
G01 X124.57818 Y28.89817
G01 X124.50426 Y28.75987
G01 X124.45090 Y28.68001
G01 X124.35141 Y28.55878
G01 X124.28349 Y28.49086
G01 X124.16225 Y28.39137
G01 X124.08237 Y28.33800
G01 X124.04833 Y28.31984
G01 X122.76548 Y28.31984
G01 X122.73150 Y28.33800
G01 X122.65164 Y28.39137
G01 X122.53040 Y28.49086
G01 X122.46248 Y28.55878
G01 X122.36299 Y28.68001
G01 X122.30963 Y28.75987
G01 X122.23569 Y28.89817
G01 X122.19893 Y28.98692
G01 X122.15342 Y29.13701
G01 X122.13691 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X121.50833 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X121.50833 Y28.31984
G01 X121.54237 Y28.33800
G01 X121.62225 Y28.39137
G01 X121.74349 Y28.49086
G01 X121.81141 Y28.55878
G01 X121.91090 Y28.68001
G01 X121.96426 Y28.75987
G01 X122.03818 Y28.89817
G01 X122.07493 Y28.98692
G01 X122.12047 Y29.13701
G01 X122.13691 Y29.21971
G01 X122.13691 Y30.45072
G01 X122.12047 Y30.53363
G01 X122.07493 Y30.68369
G01 X122.03818 Y30.77244
G01 X121.96426 Y30.91074
G01 X121.91090 Y30.99063
G01 X121.81141 Y31.11186
G01 X121.74349 Y31.17978
G01 X121.62225 Y31.27927
G01 X121.54237 Y31.33264
G01 X121.40407 Y31.40655
G01 X121.31532 Y31.44331
G01 X121.16526 Y31.48885
G01 X121.07105 Y31.50759
G01 X120.91496 Y31.52296
G01 X120.81890 Y31.52296
G01 X120.66284 Y31.50759
G01 X120.56864 Y31.48885
G01 X120.41855 Y31.44331
G01 X120.32980 Y31.40655
G01 X120.19150 Y31.33264
G01 X120.11164 Y31.27927
G01 X119.99040 Y31.17978
G01 X119.92248 Y31.11186
G01 X119.84192 Y31.01369
G01 X119.82299 Y30.99063
G01 X119.76963 Y30.91074
G01 X119.69569 Y30.77244
G01 X119.65893 Y30.68369
G01 X119.61342 Y30.53363
G01 X119.59693 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.59693 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.59693 Y29.21971
G01 X119.61342 Y29.13701
G01 X119.65893 Y28.98692
G01 X119.69569 Y28.89817
G01 X119.76963 Y28.75987
G01 X119.82299 Y28.68001
G01 X119.92248 Y28.55878
G01 X119.99040 Y28.49086
G01 X120.11164 Y28.39137
G01 X120.19150 Y28.33800
G01 X120.22548 Y28.31984
G01 X121.50833 Y28.31984
G01 X121.54237 Y28.30163
G01 X121.62225 Y28.24826
G01 X121.74349 Y28.14877
G01 X121.81141 Y28.08085
G01 X121.91090 Y27.95962
G01 X121.96426 Y27.87976
G01 X122.03818 Y27.74143
G01 X122.07493 Y27.65271
G01 X122.12047 Y27.50262
G01 X122.13691 Y27.41974
G01 X122.13691 Y26.18876
G01 X122.12047 Y26.10600
G01 X122.08187 Y25.97877
G01 X122.08166 Y25.97862
G01 X122.07646 Y25.97436
G01 X122.06040 Y25.96038
G01 X122.00742 Y25.91713
G01 X121.98161 Y25.89737
G01 X121.86000 Y25.78457
G01 X121.84509 Y25.76757
G01 X121.81082 Y25.73112
G01 X121.79116 Y25.71159
G01 X121.74537 Y25.66155
G01 X121.70402 Y25.61591
G01 X121.65532 Y25.56722
G01 X121.61392 Y25.52970
G01 X121.53396 Y25.46790
G01 X121.47740 Y25.42851
G01 X121.46838 Y25.42287
G01 X121.33874 Y25.35520
G01 X121.30778 Y25.34002
G01 X121.27509 Y25.32884
G01 X121.13564 Y25.28502
G01 X121.12525 Y25.28266
G01 X121.05743 Y25.27057
G01 X120.95718 Y25.25767
G01 X120.90138 Y25.25493
G01 X120.83247 Y25.25493
G01 X120.77666 Y25.25767
G01 X120.67643 Y25.27057
G01 X120.60864 Y25.28266
G01 X120.59823 Y25.28502
G01 X120.45875 Y25.32884
G01 X120.42604 Y25.34002
G01 X120.39510 Y25.35520
G01 X120.26546 Y25.42284
G01 X120.25644 Y25.42851
G01 X120.19990 Y25.46796
G01 X120.11992 Y25.52970
G01 X120.07852 Y25.56724
G01 X120.02983 Y25.61591
G01 X119.98845 Y25.66155
G01 X119.96846 Y25.68459
G01 X119.93712 Y25.71919
G01 X119.92472 Y25.73252
G01 X119.87463 Y25.78505
G01 X119.82510 Y25.83262
G01 X119.76340 Y25.88713
G01 X119.75180 Y25.89719
G01 X119.67671 Y25.96127
G01 X119.65154 Y25.98093
G01 X119.62096 Y25.98416
G01 X119.54166 Y25.97862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.67671 Y25.96127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.67671 Y25.96127
G01 X119.65129 Y25.98119
G01 X119.61342 Y26.10600
G01 X119.59693 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.13671 Y25.96127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.13671 Y25.96127
G01 X117.11129 Y25.98119
G01 X117.07342 Y26.10600
G01 X117.05693 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.00166 Y25.97862 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.00166 Y25.97862
G01 X117.08096 Y25.98416
G01 X117.11154 Y25.98093
G01 X117.13671 Y25.96127
G01 X117.21180 Y25.89719
G01 X117.22340 Y25.88713
G01 X117.28510 Y25.83262
G01 X117.33463 Y25.78505
G01 X117.38472 Y25.73252
G01 X117.39712 Y25.71919
G01 X117.42846 Y25.68459
G01 X117.44845 Y25.66155
G01 X117.48983 Y25.61591
G01 X117.53852 Y25.56724
G01 X117.57992 Y25.52970
G01 X117.65990 Y25.46796
G01 X117.71644 Y25.42851
G01 X117.72546 Y25.42284
G01 X117.85510 Y25.35520
G01 X117.88604 Y25.34002
G01 X117.91875 Y25.32884
G01 X118.05823 Y25.28502
G01 X118.06864 Y25.28266
G01 X118.13643 Y25.27057
G01 X118.23666 Y25.25767
G01 X118.29247 Y25.25493
G01 X118.36138 Y25.25493
G01 X118.41718 Y25.25767
G01 X118.51743 Y25.27057
G01 X118.58525 Y25.28266
G01 X118.59564 Y25.28502
G01 X118.73509 Y25.32884
G01 X118.76778 Y25.34002
G01 X118.79874 Y25.35520
G01 X118.92838 Y25.42287
G01 X118.93740 Y25.42851
G01 X118.99396 Y25.46790
G01 X119.07392 Y25.52970
G01 X119.11532 Y25.56722
G01 X119.16402 Y25.61591
G01 X119.20537 Y25.66155
G01 X119.25116 Y25.71159
G01 X119.27082 Y25.73112
G01 X119.30509 Y25.76757
G01 X119.32000 Y25.78457
G01 X119.44161 Y25.89737
G01 X119.46742 Y25.91713
G01 X119.52040 Y25.96038
G01 X119.53646 Y25.97436
G01 X119.54166 Y25.97862
G01 X119.54187 Y25.97877
G01 X119.58047 Y26.10600
G01 X119.59693 Y26.18876
G01 X119.59693 Y27.41974
G01 X119.58047 Y27.50262
G01 X119.53493 Y27.65271
G01 X119.49818 Y27.74143
G01 X119.42426 Y27.87976
G01 X119.37090 Y27.95962
G01 X119.27141 Y28.08085
G01 X119.20349 Y28.14877
G01 X119.08225 Y28.24826
G01 X119.00237 Y28.30163
G01 X118.96833 Y28.31984
G01 X117.68548 Y28.31984
G01 X117.65150 Y28.33800
G01 X117.57164 Y28.39137
G01 X117.45040 Y28.49086
G01 X117.38248 Y28.55878
G01 X117.28299 Y28.68001
G01 X117.22963 Y28.75987
G01 X117.15569 Y28.89817
G01 X117.11893 Y28.98692
G01 X117.07342 Y29.13701
G01 X117.05693 Y29.21971
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.68548 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.68548 Y28.31984
G01 X117.65150 Y28.30163
G01 X117.57164 Y28.24826
G01 X117.45040 Y28.14877
G01 X117.38248 Y28.08085
G01 X117.28299 Y27.95962
G01 X117.22963 Y27.87976
G01 X117.15569 Y27.74143
G01 X117.11893 Y27.65271
G01 X117.07342 Y27.50262
G01 X117.05693 Y27.41974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X116.42833 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X116.42833 Y28.31984
G01 X116.46237 Y28.33800
G01 X116.54225 Y28.39137
G01 X116.66349 Y28.49086
G01 X116.73141 Y28.55878
G01 X116.83090 Y28.68001
G01 X116.88426 Y28.75987
G01 X116.95818 Y28.89817
G01 X116.99493 Y28.98692
G01 X117.04047 Y29.13701
G01 X117.05693 Y29.21971
G01 X117.05693 Y30.45072
G01 X117.04047 Y30.53363
G01 X116.99493 Y30.68369
G01 X116.95818 Y30.77244
G01 X116.88426 Y30.91074
G01 X116.83090 Y30.99063
G01 X116.73141 Y31.11186
G01 X116.66349 Y31.17978
G01 X116.54225 Y31.27927
G01 X116.46237 Y31.33264
G01 X116.41617 Y31.35733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.05693 Y30.45072 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.05693 Y30.45072
G01 X117.07342 Y30.53363
G01 X117.11893 Y30.68369
G01 X117.15569 Y30.77244
G01 X117.22963 Y30.91074
G01 X117.28299 Y30.99063
G01 X117.38248 Y31.11186
G01 X117.45040 Y31.17978
G01 X117.57164 Y31.27927
G01 X117.65150 Y31.33264
G01 X117.78980 Y31.40655
G01 X117.87855 Y31.44331
G01 X118.02864 Y31.48885
G01 X118.12284 Y31.50759
G01 X118.16795 Y31.51201
G01 X118.27890 Y31.52296
G01 X118.37496 Y31.52296
G01 X118.53105 Y31.50759
G01 X118.62526 Y31.48885
G01 X118.77532 Y31.44331
G01 X118.86407 Y31.40655
G01 X119.00237 Y31.33264
G01 X119.08225 Y31.27927
G01 X119.20349 Y31.17978
G01 X119.27141 Y31.11186
G01 X119.37090 Y30.99063
G01 X119.42426 Y30.91074
G01 X119.49818 Y30.77244
G01 X119.53493 Y30.68369
G01 X119.58047 Y30.53363
G01 X119.59693 Y30.45072
G01 X119.59693 Y29.21971
G01 X119.58047 Y29.13701
G01 X119.53493 Y28.98692
G01 X119.49818 Y28.89817
G01 X119.42426 Y28.75987
G01 X119.37090 Y28.68001
G01 X119.27141 Y28.55878
G01 X119.20349 Y28.49086
G01 X119.08225 Y28.39137
G01 X119.00237 Y28.33800
G01 X118.96833 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.59693 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.59693 Y27.41974
G01 X119.61342 Y27.50262
G01 X119.65893 Y27.65271
G01 X119.69569 Y27.74143
G01 X119.76963 Y27.87976
G01 X119.82299 Y27.95962
G01 X119.92248 Y28.08085
G01 X119.99040 Y28.14877
G01 X120.11164 Y28.24826
G01 X120.19150 Y28.30163
G01 X120.22548 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.13691 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.13691 Y27.41974
G01 X122.15342 Y27.50262
G01 X122.19893 Y27.65271
G01 X122.23569 Y27.74143
G01 X122.30963 Y27.87976
G01 X122.36299 Y27.95962
G01 X122.46248 Y28.08085
G01 X122.53040 Y28.14877
G01 X122.65164 Y28.24826
G01 X122.73150 Y28.30163
G01 X122.76548 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.04833 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.04833 Y28.31984
G01 X124.08237 Y28.30163
G01 X124.16225 Y28.24826
G01 X124.28349 Y28.14877
G01 X124.35141 Y28.08085
G01 X124.45090 Y27.95962
G01 X124.50426 Y27.87976
G01 X124.57818 Y27.74143
G01 X124.61493 Y27.65271
G01 X124.66047 Y27.50262
G01 X124.67693 Y27.41974
G01 X124.67693 Y26.18876
G01 X124.66047 Y26.10600
G01 X124.62187 Y25.97877
G01 X124.62166 Y25.97862
G01 X124.61646 Y25.97436
G01 X124.60040 Y25.96038
G01 X124.54742 Y25.91713
G01 X124.52161 Y25.89737
G01 X124.40000 Y25.78457
G01 X124.38509 Y25.76757
G01 X124.35082 Y25.73112
G01 X124.33116 Y25.71159
G01 X124.28537 Y25.66155
G01 X124.24402 Y25.61591
G01 X124.19532 Y25.56722
G01 X124.15392 Y25.52970
G01 X124.07396 Y25.46790
G01 X124.01740 Y25.42851
G01 X124.00838 Y25.42287
G01 X123.87874 Y25.35520
G01 X123.84778 Y25.34002
G01 X123.81509 Y25.32884
G01 X123.67564 Y25.28502
G01 X123.66525 Y25.28266
G01 X123.59743 Y25.27057
G01 X123.49718 Y25.25767
G01 X123.44138 Y25.25493
G01 X123.37247 Y25.25493
G01 X123.31666 Y25.25767
G01 X123.21643 Y25.27057
G01 X123.14864 Y25.28266
G01 X123.13823 Y25.28502
G01 X122.99875 Y25.32884
G01 X122.96604 Y25.34002
G01 X122.93510 Y25.35520
G01 X122.80546 Y25.42284
G01 X122.79644 Y25.42851
G01 X122.73990 Y25.46796
G01 X122.65992 Y25.52970
G01 X122.61852 Y25.56724
G01 X122.56983 Y25.61591
G01 X122.52845 Y25.66155
G01 X122.50846 Y25.68459
G01 X122.47712 Y25.71919
G01 X122.46472 Y25.73252
G01 X122.41463 Y25.78505
G01 X122.36510 Y25.83262
G01 X122.30340 Y25.88713
G01 X122.29180 Y25.89719
G01 X122.21671 Y25.96127
G01 X122.19154 Y25.98093
G01 X122.16096 Y25.98416
G01 X122.08166 Y25.97862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.13691 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.13691 Y26.18876
G01 X122.15342 Y26.10600
G01 X122.19129 Y25.98119
G01 X122.21671 Y25.96127
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.11203 Y20.00993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.11203 Y20.00993
G01 X117.07342 Y19.88262
G01 X117.05693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.00230 Y20.00769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.00230 Y20.00769
G01 X117.03280 Y20.00452
G01 X117.11203 Y20.00993
G01 X117.11738 Y20.01432
G01 X117.13351 Y20.02834
G01 X117.18642 Y20.07157
G01 X117.21218 Y20.09123
G01 X117.33382 Y20.20406
G01 X117.34863 Y20.22095
G01 X117.38302 Y20.25753
G01 X117.40255 Y20.27691
G01 X117.44860 Y20.32725
G01 X117.48983 Y20.37274
G01 X117.53852 Y20.42143
G01 X117.57992 Y20.45895
G01 X117.65988 Y20.52075
G01 X117.71644 Y20.56014
G01 X117.72546 Y20.56581
G01 X117.85508 Y20.63345
G01 X117.88609 Y20.64866
G01 X117.91875 Y20.65981
G01 X117.93745 Y20.66568
G01 X118.05818 Y20.70360
G01 X118.06864 Y20.70601
G01 X118.13643 Y20.71810
G01 X118.23669 Y20.73098
G01 X118.29247 Y20.73373
G01 X118.36138 Y20.73373
G01 X118.41718 Y20.73098
G01 X118.51743 Y20.71810
G01 X118.58525 Y20.70601
G01 X118.59566 Y20.70363
G01 X118.73509 Y20.65981
G01 X118.76778 Y20.64866
G01 X118.79876 Y20.63345
G01 X118.92838 Y20.56581
G01 X118.93740 Y20.56014
G01 X118.99396 Y20.52075
G01 X119.07392 Y20.45895
G01 X119.11532 Y20.42143
G01 X119.16402 Y20.37274
G01 X119.20524 Y20.32725
G01 X119.22548 Y20.30393
G01 X119.25683 Y20.26936
G01 X119.26912 Y20.25613
G01 X119.31918 Y20.20365
G01 X119.36882 Y20.15593
G01 X119.43054 Y20.10147
G01 X119.44202 Y20.09149
G01 X119.51725 Y20.02733
G01 X119.54230 Y20.00772
G01 X119.54230 Y20.00769
G01 X119.54258 Y20.00751
G01 X119.58047 Y19.88262
G01 X119.59693 Y19.79974
G01 X119.59693 Y18.56873
G01 X119.58047 Y18.48600
G01 X119.53493 Y18.33591
G01 X119.49818 Y18.24719
G01 X119.42426 Y18.10886
G01 X119.37090 Y18.02901
G01 X119.35192 Y18.00589
G01 X119.27141 Y17.90777
G01 X119.20349 Y17.83985
G01 X119.08225 Y17.74036
G01 X119.00237 Y17.68700
G01 X118.86407 Y17.61306
G01 X118.77532 Y17.57630
G01 X118.62526 Y17.53079
G01 X118.53105 Y17.51204
G01 X118.37496 Y17.49667
G01 X118.27890 Y17.49667
G01 X118.12284 Y17.51204
G01 X118.02864 Y17.53079
G01 X117.87855 Y17.57630
G01 X117.78980 Y17.61306
G01 X117.65150 Y17.68700
G01 X117.57164 Y17.74036
G01 X117.45040 Y17.83985
G01 X117.38248 Y17.90777
G01 X117.28299 Y18.02901
G01 X117.22963 Y18.10886
G01 X117.15569 Y18.24719
G01 X117.11893 Y18.33591
G01 X117.07342 Y18.48600
G01 X117.05693 Y18.56873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.59693 Y18.56873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.59693 Y18.56873
G01 X119.61342 Y18.48600
G01 X119.65893 Y18.33591
G01 X119.69569 Y18.24719
G01 X119.76963 Y18.10886
G01 X119.82299 Y18.02901
G01 X119.92248 Y17.90777
G01 X119.99040 Y17.83985
G01 X120.11164 Y17.74036
G01 X120.19150 Y17.68700
G01 X120.32980 Y17.61306
G01 X120.41855 Y17.57630
G01 X120.56864 Y17.53079
G01 X120.66284 Y17.51204
G01 X120.81890 Y17.49667
G01 X120.91496 Y17.49667
G01 X121.07105 Y17.51204
G01 X121.16526 Y17.53079
G01 X121.31532 Y17.57630
G01 X121.40407 Y17.61306
G01 X121.54237 Y17.68700
G01 X121.62225 Y17.74036
G01 X121.74349 Y17.83985
G01 X121.81141 Y17.90777
G01 X121.89192 Y18.00589
G01 X121.91090 Y18.02901
G01 X121.96426 Y18.10886
G01 X122.03818 Y18.24719
G01 X122.07493 Y18.33591
G01 X122.12047 Y18.48600
G01 X122.13691 Y18.56873
G01 X122.13691 Y19.79974
G01 X122.12047 Y19.88262
G01 X122.08258 Y20.00751
G01 X122.08230 Y20.00769
G01 X122.08230 Y20.00772
G01 X122.05725 Y20.02733
G01 X121.98202 Y20.09149
G01 X121.97054 Y20.10147
G01 X121.90882 Y20.15593
G01 X121.85918 Y20.20365
G01 X121.80912 Y20.25613
G01 X121.79683 Y20.26936
G01 X121.76548 Y20.30393
G01 X121.74524 Y20.32725
G01 X121.70402 Y20.37274
G01 X121.65532 Y20.42143
G01 X121.61392 Y20.45895
G01 X121.53396 Y20.52075
G01 X121.47740 Y20.56014
G01 X121.46838 Y20.56581
G01 X121.33876 Y20.63345
G01 X121.30778 Y20.64866
G01 X121.27509 Y20.65981
G01 X121.13567 Y20.70363
G01 X121.12525 Y20.70601
G01 X121.05743 Y20.71810
G01 X120.95718 Y20.73098
G01 X120.90138 Y20.73373
G01 X120.83247 Y20.73373
G01 X120.77669 Y20.73098
G01 X120.67643 Y20.71810
G01 X120.60864 Y20.70601
G01 X120.59818 Y20.70360
G01 X120.47745 Y20.66568
G01 X120.45875 Y20.65981
G01 X120.42609 Y20.64866
G01 X120.39508 Y20.63345
G01 X120.26546 Y20.56581
G01 X120.25644 Y20.56014
G01 X120.19988 Y20.52075
G01 X120.11992 Y20.45895
G01 X120.07852 Y20.42143
G01 X120.02983 Y20.37274
G01 X119.98860 Y20.32725
G01 X119.94255 Y20.27691
G01 X119.92302 Y20.25753
G01 X119.88863 Y20.22095
G01 X119.87382 Y20.20406
G01 X119.75218 Y20.09123
G01 X119.72642 Y20.07157
G01 X119.67351 Y20.02834
G01 X119.65738 Y20.01432
G01 X119.65203 Y20.00993
G01 X119.57280 Y20.00452
G01 X119.54230 Y20.00769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.65203 Y20.00993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.65203 Y20.00993
G01 X119.61342 Y19.88262
G01 X119.59693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.13691 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.13691 Y19.79974
G01 X122.15342 Y19.88262
G01 X122.19203 Y20.00993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.08230 Y20.00769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.08230 Y20.00769
G01 X122.11280 Y20.00452
G01 X122.19203 Y20.00993
G01 X122.19738 Y20.01432
G01 X122.21351 Y20.02834
G01 X122.26642 Y20.07157
G01 X122.29218 Y20.09123
G01 X122.41382 Y20.20406
G01 X122.42863 Y20.22095
G01 X122.46302 Y20.25753
G01 X122.48255 Y20.27691
G01 X122.52860 Y20.32725
G01 X122.56983 Y20.37274
G01 X122.61852 Y20.42143
G01 X122.65992 Y20.45895
G01 X122.73988 Y20.52075
G01 X122.79644 Y20.56014
G01 X122.80546 Y20.56581
G01 X122.93508 Y20.63345
G01 X122.96609 Y20.64866
G01 X122.99875 Y20.65981
G01 X123.01745 Y20.66568
G01 X123.13818 Y20.70360
G01 X123.14864 Y20.70601
G01 X123.21643 Y20.71810
G01 X123.31669 Y20.73098
G01 X123.37247 Y20.73373
G01 X123.44138 Y20.73373
G01 X123.49718 Y20.73098
G01 X123.59743 Y20.71810
G01 X123.66525 Y20.70601
G01 X123.67566 Y20.70363
G01 X123.81509 Y20.65981
G01 X123.84778 Y20.64866
G01 X123.87876 Y20.63345
G01 X124.00838 Y20.56581
G01 X124.01740 Y20.56014
G01 X124.07396 Y20.52075
G01 X124.15392 Y20.45895
G01 X124.19532 Y20.42143
G01 X124.24402 Y20.37274
G01 X124.28524 Y20.32725
G01 X124.30548 Y20.30393
G01 X124.33683 Y20.26936
G01 X124.34912 Y20.25613
G01 X124.39918 Y20.20365
G01 X124.44882 Y20.15593
G01 X124.51054 Y20.10147
G01 X124.52202 Y20.09149
G01 X124.59725 Y20.02733
G01 X124.62230 Y20.00772
G01 X124.62230 Y20.00769
G01 X124.62258 Y20.00751
G01 X124.66047 Y19.88262
G01 X124.67693 Y19.79974
G01 X124.67693 Y18.56873
G01 X124.66047 Y18.48600
G01 X124.61493 Y18.33591
G01 X124.57818 Y18.24719
G01 X124.50426 Y18.10886
G01 X124.45090 Y18.02901
G01 X124.43192 Y18.00589
G01 X124.35141 Y17.90777
G01 X124.28349 Y17.83985
G01 X124.16225 Y17.74036
G01 X124.08237 Y17.68700
G01 X123.94407 Y17.61306
G01 X123.85532 Y17.57630
G01 X123.70526 Y17.53079
G01 X123.61105 Y17.51204
G01 X123.45496 Y17.49667
G01 X123.35890 Y17.49667
G01 X123.20284 Y17.51204
G01 X123.10864 Y17.53079
G01 X122.95855 Y17.57630
G01 X122.86980 Y17.61306
G01 X122.73150 Y17.68700
G01 X122.65164 Y17.74036
G01 X122.53040 Y17.83985
G01 X122.46248 Y17.90777
G01 X122.36299 Y18.02901
G01 X122.30963 Y18.10886
G01 X122.23569 Y18.24719
G01 X122.19893 Y18.33591
G01 X122.15342 Y18.48600
G01 X122.13691 Y18.56873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.67693 Y18.56873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.67693 Y18.56873
G01 X124.69342 Y18.48600
G01 X124.73893 Y18.33591
G01 X124.77569 Y18.24719
G01 X124.84963 Y18.10886
G01 X124.90299 Y18.02901
G01 X125.00248 Y17.90777
G01 X125.07040 Y17.83985
G01 X125.19164 Y17.74036
G01 X125.27150 Y17.68700
G01 X125.40980 Y17.61306
G01 X125.49855 Y17.57630
G01 X125.64864 Y17.53079
G01 X125.74284 Y17.51204
G01 X125.89890 Y17.49667
G01 X125.99496 Y17.49667
G01 X126.15105 Y17.51204
G01 X126.24526 Y17.53079
G01 X126.39532 Y17.57630
G01 X126.48407 Y17.61306
G01 X126.62237 Y17.68700
G01 X126.70225 Y17.74036
G01 X126.82349 Y17.83985
G01 X126.89141 Y17.90777
G01 X126.97192 Y18.00589
G01 X126.99090 Y18.02901
G01 X127.04426 Y18.10886
G01 X127.11818 Y18.24719
G01 X127.15493 Y18.33591
G01 X127.20047 Y18.48600
G01 X127.21691 Y18.56873
G01 X127.21691 Y19.79974
G01 X127.20047 Y19.88262
G01 X127.16258 Y20.00751
G01 X127.16230 Y20.00769
G01 X127.16230 Y20.00772
G01 X127.13725 Y20.02733
G01 X127.06202 Y20.09149
G01 X127.05054 Y20.10147
G01 X126.98882 Y20.15593
G01 X126.93918 Y20.20365
G01 X126.88912 Y20.25613
G01 X126.87683 Y20.26936
G01 X126.84548 Y20.30393
G01 X126.82524 Y20.32725
G01 X126.78402 Y20.37274
G01 X126.73532 Y20.42143
G01 X126.69392 Y20.45895
G01 X126.61396 Y20.52075
G01 X126.55740 Y20.56014
G01 X126.54838 Y20.56581
G01 X126.41876 Y20.63345
G01 X126.38778 Y20.64866
G01 X126.35509 Y20.65981
G01 X126.21566 Y20.70363
G01 X126.20525 Y20.70601
G01 X126.13743 Y20.71810
G01 X126.03718 Y20.73098
G01 X125.98138 Y20.73373
G01 X125.91247 Y20.73373
G01 X125.85669 Y20.73098
G01 X125.75643 Y20.71810
G01 X125.68864 Y20.70601
G01 X125.67818 Y20.70360
G01 X125.55745 Y20.66568
G01 X125.53875 Y20.65981
G01 X125.50609 Y20.64866
G01 X125.47508 Y20.63345
G01 X125.34546 Y20.56581
G01 X125.33644 Y20.56014
G01 X125.27988 Y20.52075
G01 X125.19992 Y20.45895
G01 X125.15852 Y20.42143
G01 X125.10983 Y20.37274
G01 X125.06860 Y20.32725
G01 X125.02255 Y20.27691
G01 X125.00302 Y20.25753
G01 X124.96863 Y20.22095
G01 X124.95382 Y20.20406
G01 X124.83218 Y20.09123
G01 X124.80642 Y20.07157
G01 X124.75351 Y20.02834
G01 X124.73739 Y20.01432
G01 X124.73203 Y20.00993
G01 X124.65280 Y20.00452
G01 X124.62230 Y20.00769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.73203 Y20.00993 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.73203 Y20.00993
G01 X124.69342 Y19.88262
G01 X124.67693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y18.56873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y18.56873
G01 X127.23342 Y18.48600
G01 X127.27893 Y18.33591
G01 X127.31569 Y18.24719
G01 X127.38963 Y18.10886
G01 X127.44299 Y18.02901
G01 X127.54248 Y17.90777
G01 X127.61040 Y17.83985
G01 X127.73164 Y17.74036
G01 X127.81150 Y17.68700
G01 X127.94980 Y17.61306
G01 X128.03855 Y17.57630
G01 X128.18864 Y17.53079
G01 X128.28284 Y17.51204
G01 X128.43890 Y17.49667
G01 X128.53496 Y17.49667
G01 X128.69105 Y17.51204
G01 X128.78526 Y17.53079
G01 X128.93532 Y17.57630
G01 X129.02407 Y17.61306
G01 X129.16237 Y17.68700
G01 X129.24225 Y17.74036
G01 X129.36349 Y17.83985
G01 X129.43141 Y17.90777
G01 X129.51192 Y18.00589
G01 X129.53090 Y18.02901
G01 X129.58426 Y18.10886
G01 X129.65818 Y18.24719
G01 X129.69493 Y18.33591
G01 X129.74047 Y18.48600
G01 X129.75693 Y18.56873
G01 X129.75693 Y19.79974
G01 X129.77342 Y19.88262
G01 X129.81203 Y20.00993
G01 X129.81738 Y20.01432
G01 X129.83351 Y20.02834
G01 X129.88642 Y20.07157
G01 X129.91218 Y20.09123
G01 X130.03382 Y20.20406
G01 X130.04863 Y20.22095
G01 X130.08302 Y20.25753
G01 X130.10255 Y20.27691
G01 X130.14860 Y20.32725
G01 X130.18983 Y20.37274
G01 X130.23852 Y20.42143
G01 X130.27992 Y20.45895
G01 X130.35988 Y20.52075
G01 X130.41644 Y20.56014
G01 X130.42546 Y20.56581
G01 X130.55508 Y20.63345
G01 X130.58609 Y20.64866
G01 X130.61875 Y20.65981
G01 X130.63745 Y20.66568
G01 X130.75818 Y20.70360
G01 X130.76864 Y20.70601
G01 X130.83643 Y20.71810
G01 X130.93669 Y20.73098
G01 X130.99247 Y20.73373
G01 X131.06138 Y20.73373
G01 X131.11715 Y20.73098
G01 X131.21743 Y20.71810
G01 X131.27474 Y20.70833
G01 X131.28523 Y20.70599
G01 X131.29564 Y20.70360
G01 X131.30125 Y20.70185
G01 X131.35495 Y20.68727
G01 X131.40049 Y20.67680
G01 X131.43796 Y20.66926
G01 X131.51106 Y20.65648
G01 X131.55840 Y20.64965
G01 X131.64080 Y20.64018
G01 X131.67827 Y20.63665
G01 X131.78116 Y20.62898
G01 X131.78225 Y20.62826
G01 X131.81591 Y20.60063
G01 X131.86948 Y20.48740
G01 X131.90359 Y20.40525
G01 X131.95972 Y20.24841
G01 X131.97974 Y20.18257
G01 X132.01903 Y20.02575
G01 X132.03003 Y19.97056
G01 X132.05330 Y19.81371
G01 X132.05815 Y19.76466
G01 X132.06584 Y19.60787
G01 X132.06640 Y19.58432
G01 X132.06640 Y18.78430
G01 X132.06584 Y18.76078
G01 X132.05815 Y18.60399
G01 X132.05330 Y18.55494
G01 X132.03003 Y18.39809
G01 X132.01903 Y18.34290
G01 X131.97974 Y18.18608
G01 X131.95972 Y18.12024
G01 X131.90359 Y17.96340
G01 X131.86948 Y17.88125
G01 X131.81591 Y17.76797
G01 X131.81591 Y15.17750
G01 X131.83021 Y15.15362
G01 X131.87753 Y15.06539
G01 X131.90072 Y15.01636
G01 X131.93239 Y14.94009
G01 X131.94994 Y14.89109
G01 X131.97059 Y14.82320
G01 X131.98286 Y14.77417
G01 X131.99521 Y14.71220
G01 X132.00247 Y14.66318
G01 X132.00829 Y14.60440
G01 X132.01070 Y14.55540
G01 X132.01144 Y14.52632
G01 X132.01144 Y13.32328
G01 X131.90913 Y13.07631
G01 X131.90105 Y13.05810
G01 X131.87880 Y13.01106
G01 X131.86315 Y12.98175
G01 X131.83719 Y12.93841
G01 X131.82134 Y12.91467
G01 X131.79183 Y12.87489
G01 X131.77542 Y12.85487
G01 X131.74248 Y12.81853
G01 X131.72472 Y12.80077
G01 X131.68837 Y12.76783
G01 X131.66836 Y12.75142
G01 X131.62858 Y12.72191
G01 X131.60483 Y12.70606
G01 X131.56150 Y12.68010
G01 X131.53211 Y12.66440
G01 X131.48505 Y12.64215
G01 X131.48060 Y12.64009
G01 X131.46694 Y12.63984
G01 X130.26694 Y12.63984
G01 X130.24860 Y12.64029
G01 X130.19960 Y12.64268
G01 X130.16214 Y12.64639
G01 X130.11312 Y12.65366
G01 X130.07306 Y12.66166
G01 X130.02409 Y12.67392
G01 X129.97956 Y12.68746
G01 X129.93054 Y12.70499
G01 X129.87906 Y12.72638
G01 X129.83003 Y12.74957
G01 X129.76887 Y12.78236
G01 X129.71987 Y12.81172
G01 X129.64484 Y12.86206
G01 X129.59582 Y12.89841
G01 X129.54027 Y12.94332
G01 X129.48627 Y12.94332
G01 X129.42874 Y12.91268
G01 X129.26212 Y12.83387
G01 X129.19051 Y12.80412
G01 X129.02389 Y12.74451
G01 X128.96844 Y12.72765
G01 X128.80182 Y12.68591
G01 X128.75711 Y12.67700
G01 X128.59049 Y12.65228
G01 X128.55188 Y12.64847
G01 X128.38526 Y12.64029
G01 X128.34860 Y12.64029
G01 X128.18198 Y12.64847
G01 X128.14335 Y12.65228
G01 X127.97672 Y12.67700
G01 X127.93199 Y12.68591
G01 X127.76540 Y12.72765
G01 X127.70997 Y12.74451
G01 X127.54335 Y12.80412
G01 X127.47175 Y12.83387
G01 X127.30512 Y12.91268
G01 X127.24792 Y12.94334
G01 X126.98589 Y12.94332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.24792 Y12.94334 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.24792 Y12.94334
G01 X127.22806 Y12.97309
G01 X127.14950 Y13.12005
G01 X127.11693 Y13.19864
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.11693 Y14.40397 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.11693 Y14.40397
G01 X127.14950 Y14.48258
G01 X127.22806 Y14.62952
G01 X127.28142 Y14.70940
G01 X127.38711 Y14.83821
G01 X127.45503 Y14.90613
G01 X127.58386 Y15.01184
G01 X127.66372 Y15.06521
G01 X127.81068 Y15.14374
G01 X127.89941 Y15.18052
G01 X128.05887 Y15.22889
G01 X128.15308 Y15.24763
G01 X128.31891 Y15.26396
G01 X128.41497 Y15.26396
G01 X128.58079 Y15.24763
G01 X128.67499 Y15.22889
G01 X128.83446 Y15.18052
G01 X128.92320 Y15.14374
G01 X129.07017 Y15.06521
G01 X129.15003 Y15.01184
G01 X129.27883 Y14.90613
G01 X129.34675 Y14.83821
G01 X129.45246 Y14.70940
G01 X129.50583 Y14.62952
G01 X129.53021 Y14.58390
G01 X129.53212 Y14.57430
G01 X129.54289 Y14.52632
G01 X129.55744 Y14.46815
G01 X129.57507 Y14.37984
G01 X129.59978 Y14.21322
G01 X129.60776 Y14.13227
G01 X129.61594 Y13.96564
G01 X129.61693 Y13.92635
G01 X129.61693 Y13.67634
G01 X129.61594 Y13.63702
G01 X129.60776 Y13.47039
G01 X129.59976 Y13.38939
G01 X129.57507 Y13.22279
G01 X129.55744 Y13.13450
G01 X129.54289 Y13.07631
G01 X129.53212 Y13.02836
G01 X129.53021 Y13.01870
G01 X129.53410 Y12.97951
G01 X129.54149 Y12.94235
G01 X129.59582 Y12.89841
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.42874 Y12.91268 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.42874 Y12.91268
G01 X129.48576 Y12.94306
G01 X129.50583 Y12.97309
G01 X129.53021 Y13.01870
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.53021 Y14.58390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.53021 Y14.58390
G01 X129.53410 Y14.62312
G01 X129.55284 Y14.71733
G01 X129.56707 Y14.76422
G01 X129.60382 Y14.85297
G01 X129.62694 Y14.89620
G01 X129.68030 Y14.97605
G01 X129.70816 Y15.01001
G01 X129.71139 Y15.01395
G01 X129.77931 Y15.08187
G01 X129.81718 Y15.11296
G01 X129.89706 Y15.16632
G01 X129.94027 Y15.18941
G01 X130.02902 Y15.22619
G01 X130.07593 Y15.24042
G01 X130.17014 Y15.25916
G01 X130.21891 Y15.26396
G01 X130.26694 Y15.26632
G01 X131.46694 Y15.26632
G01 X131.51497 Y15.26396
G01 X131.56374 Y15.25916
G01 X131.65795 Y15.24042
G01 X131.70486 Y15.22619
G01 X131.79358 Y15.18941
G01 X131.81591 Y15.17750
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.81591 Y17.76797 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.81591 Y17.76797
G01 X131.78225 Y17.74036
G01 X131.70237 Y17.68700
G01 X131.56407 Y17.61306
G01 X131.47532 Y17.57630
G01 X131.41383 Y17.55766
G01 X131.32526 Y17.53079
G01 X131.23105 Y17.51204
G01 X131.07496 Y17.49667
G01 X130.97890 Y17.49667
G01 X130.82284 Y17.51204
G01 X130.72864 Y17.53079
G01 X130.57855 Y17.57630
G01 X130.48980 Y17.61306
G01 X130.35150 Y17.68700
G01 X130.27164 Y17.74036
G01 X130.15040 Y17.83985
G01 X130.08248 Y17.90777
G01 X129.98299 Y18.02901
G01 X129.92963 Y18.10886
G01 X129.85569 Y18.24719
G01 X129.81893 Y18.33591
G01 X129.77342 Y18.48600
G01 X129.75693 Y18.56873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y19.79974
G01 X127.23342 Y19.88262
G01 X127.27203 Y20.00993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.16230 Y20.00769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.16230 Y20.00769
G01 X127.19280 Y20.00452
G01 X127.27203 Y20.00993
G01 X127.27738 Y20.01432
G01 X127.29351 Y20.02834
G01 X127.34642 Y20.07157
G01 X127.37218 Y20.09123
G01 X127.49382 Y20.20406
G01 X127.50863 Y20.22095
G01 X127.54302 Y20.25753
G01 X127.56255 Y20.27691
G01 X127.60860 Y20.32725
G01 X127.64983 Y20.37274
G01 X127.69852 Y20.42143
G01 X127.73992 Y20.45895
G01 X127.81988 Y20.52075
G01 X127.87644 Y20.56014
G01 X127.88546 Y20.56581
G01 X128.01508 Y20.63345
G01 X128.04609 Y20.64866
G01 X128.07876 Y20.65981
G01 X128.09745 Y20.66568
G01 X128.21818 Y20.70360
G01 X128.22864 Y20.70601
G01 X128.29643 Y20.71810
G01 X128.39669 Y20.73098
G01 X128.45247 Y20.73373
G01 X128.52138 Y20.73373
G01 X128.57718 Y20.73098
G01 X128.67743 Y20.71810
G01 X128.74525 Y20.70601
G01 X128.75566 Y20.70363
G01 X128.89509 Y20.65981
G01 X128.92778 Y20.64866
G01 X128.95876 Y20.63345
G01 X129.08838 Y20.56581
G01 X129.09740 Y20.56014
G01 X129.15396 Y20.52075
G01 X129.23392 Y20.45895
G01 X129.27532 Y20.42143
G01 X129.32402 Y20.37274
G01 X129.36524 Y20.32725
G01 X129.38548 Y20.30393
G01 X129.41683 Y20.26936
G01 X129.42912 Y20.25613
G01 X129.47918 Y20.20365
G01 X129.52882 Y20.15593
G01 X129.59054 Y20.10147
G01 X129.60202 Y20.09149
G01 X129.67725 Y20.02733
G01 X129.70230 Y20.00772
G01 X129.70230 Y20.00769
G01 X129.70258 Y20.00751
G01 X129.74047 Y19.88262
G01 X129.75693 Y19.79974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.70230 Y20.00769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.70230 Y20.00769
G01 X129.73280 Y20.00452
G01 X129.81203 Y20.00993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.67827 Y20.63665 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.67827 Y20.63665
G01 X131.77816 Y20.62920
G01 X131.81200 Y20.64874
G01 X131.81431 Y20.65069
G01 X131.85195 Y20.72910
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.81591 Y20.60063 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.81591 Y20.60063
G01 X131.81593 Y20.65405
G01 X131.85195 Y20.72910
G01 X131.88388 Y20.80624
G01 X131.93945 Y21.00980
G01 X131.94959 Y21.08691
G01 X131.95566 Y21.17914
G01 X131.95566 Y24.75482
G01 X131.94959 Y24.84708
G01 X131.93945 Y24.92422
G01 X131.88388 Y25.12775
G01 X131.86737 Y25.16763
G01 X131.82934 Y25.18228
G01 X131.82693 Y25.18330
G01 X131.62579 Y25.23786
G01 X131.54867 Y25.24799
G01 X131.45645 Y25.25411
G01 X130.22693 Y25.25411
G01 X130.18622 Y25.25526
G01 X130.16874 Y25.25729
G01 X130.08264 Y25.28375
G01 X130.01012 Y25.32759
G01 X129.94982 Y25.38797
G01 X129.94687 Y25.39211
G01 X129.93966 Y25.40245
G01 X129.87774 Y25.49315
G01 X129.83511 Y25.56308
G01 X129.81271 Y25.60435
G01 X129.73694 Y25.71393
G01 X129.73692 Y25.71393
G01 X129.72968 Y25.72444
G01 X129.66382 Y25.74088
G01 X129.59633 Y25.75155
G01 X129.58683 Y25.74685
G01 X129.56824 Y25.73737
G01 X129.47941 Y25.69125
G01 X129.37380 Y25.62645
G01 X129.34045 Y25.60240
G01 X129.30875 Y25.58071
G01 X129.27969 Y25.56191
G01 X129.23105 Y25.52752
G01 X129.15394 Y25.46796
G01 X129.09740 Y25.42851
G01 X129.08838 Y25.42284
G01 X128.95874 Y25.35520
G01 X128.92778 Y25.34002
G01 X128.89509 Y25.32884
G01 X128.75564 Y25.28502
G01 X128.74525 Y25.28266
G01 X128.67743 Y25.27057
G01 X128.57718 Y25.25767
G01 X128.52138 Y25.25493
G01 X128.45247 Y25.25493
G01 X128.39666 Y25.25767
G01 X128.29643 Y25.27057
G01 X128.22864 Y25.28266
G01 X128.21823 Y25.28502
G01 X128.07876 Y25.32884
G01 X128.04604 Y25.34002
G01 X128.01510 Y25.35520
G01 X127.88546 Y25.42284
G01 X127.87644 Y25.42851
G01 X127.81990 Y25.46796
G01 X127.73992 Y25.52970
G01 X127.69852 Y25.56724
G01 X127.64983 Y25.61591
G01 X127.60845 Y25.66155
G01 X127.58846 Y25.68459
G01 X127.55712 Y25.71919
G01 X127.54472 Y25.73252
G01 X127.49463 Y25.78505
G01 X127.44510 Y25.83262
G01 X127.38340 Y25.88713
G01 X127.37180 Y25.89719
G01 X127.29671 Y25.96127
G01 X127.27154 Y25.98093
G01 X127.24096 Y25.98416
G01 X127.16166 Y25.97862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.21691 Y26.18876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.21691 Y26.18876
G01 X127.23342 Y26.10600
G01 X127.27129 Y25.98119
G01 X127.29671 Y25.96127
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.73692 Y27.51433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.73692 Y27.51433
G01 X129.73694 Y28.00432
G01 X129.74634 Y28.09990
G01 X129.77423 Y28.19185
G01 X129.81952 Y28.27653
G01 X129.88045 Y28.35083
G01 X129.95470 Y28.41174
G01 X130.03943 Y28.45703
G01 X130.13135 Y28.48489
G01 X130.15675 Y28.48741
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.12833 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.12833 Y28.31984
G01 X129.16237 Y28.30163
G01 X129.24225 Y28.24826
G01 X129.36349 Y28.14877
G01 X129.43141 Y28.08085
G01 X129.53090 Y27.95962
G01 X129.58426 Y27.87976
G01 X129.65818 Y27.74143
G01 X129.69493 Y27.65271
G01 X129.73692 Y27.51433
G01 X129.73872 Y27.50206
G01 X129.74809 Y27.40732
G01 X129.75579 Y27.25050
G01 X129.75693 Y27.20432
G01 X129.75693 Y26.40430
G01 X129.75579 Y26.35815
G01 X129.74809 Y26.20135
G01 X129.73872 Y26.10661
G01 X129.73689 Y26.09427
G01 X129.73692 Y25.71393
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.59633 Y25.75155 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.59633 Y25.75155
G01 X129.65818 Y25.86719
G01 X129.69493 Y25.95591
G01 X129.73689 Y26.09427
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.86737 Y25.16763 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.86737 Y25.16763
G01 X132.06640 Y25.60435
G01 X132.06640 Y28.00435
G01 X132.00981 Y28.23722
G01 X131.84004 Y28.47003
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.23248 Y32.47432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.23248 Y32.47432
G01 X137.24818 Y32.43642
G01 X137.26809 Y32.37076
G01 X137.28684 Y32.27655
G01 X137.29354 Y32.20825
G01 X137.29591 Y32.16022
G01 X137.29588 Y28.47938
G01 X137.26124 Y28.34113
G01 X137.24379 Y28.25357
G01 X137.22052 Y28.09673
G01 X137.21259 Y28.01631
G01 X137.20487 Y27.85952
G01 X137.20487 Y27.78118
G01 X137.21259 Y27.62436
G01 X137.22052 Y27.54392
G01 X137.24379 Y27.38708
G01 X137.26124 Y27.29955
G01 X137.29588 Y27.16122
G01 X137.29591 Y26.86689
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.45207 Y26.95040 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.45207 Y26.95040
G01 X137.35798 Y27.06501
G01 X137.30462 Y27.14489
G01 X137.29588 Y27.16122
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.29588 Y28.47938 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.29588 Y28.47938
G01 X137.30462 Y28.49576
G01 X137.35798 Y28.57565
G01 X137.45748 Y28.69688
G01 X137.52540 Y28.76480
G01 X137.56195 Y28.79477
G01 X137.56195 Y32.59911
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.27088 Y32.96835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.27088 Y32.96835
G01 X139.24193 Y32.93939
G01 X139.24193 Y31.52705
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.34566 Y31.58925 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.34566 Y31.58925
G01 X139.31983 Y31.57986
G01 X139.24764 Y31.53817
G01 X139.24193 Y31.52705
G01 X139.20591 Y31.45679
G01 X139.17396 Y31.37968
G01 X139.11841 Y31.17610
G01 X139.10825 Y31.09898
G01 X139.10218 Y31.00673
G01 X139.10218 Y28.95278
G01 X139.10324 Y28.91413
G01 X139.10505 Y28.88136
G01 X139.12524 Y28.74717
G01 X139.12692 Y28.74039
G01 X139.17223 Y28.68469
G01 X139.19283 Y28.66046
G01 X139.23377 Y28.61441
G01 X139.23885 Y28.60861
G01 X139.30980 Y28.52698
G01 X139.33868 Y28.48763
G01 X139.37662 Y28.43023
G01 X139.41358 Y28.36782
G01 X139.45046 Y28.29185
G01 X139.47746 Y28.22853
G01 X139.49024 Y28.19396
G01 X139.52242 Y28.07826
G01 X139.53761 Y28.01103
G01 X139.53781 Y28.00986
G01 X139.55186 Y27.85487
G01 X139.55414 Y27.82033
G01 X139.55188 Y27.78583
G01 X139.53781 Y27.63079
G01 X139.53761 Y27.62965
G01 X139.52242 Y27.56241
G01 X139.49024 Y27.44672
G01 X139.47746 Y27.41215
G01 X139.45046 Y27.34880
G01 X139.41358 Y27.27285
G01 X139.37662 Y27.21045
G01 X139.33868 Y27.15302
G01 X139.30982 Y27.11367
G01 X139.23885 Y27.03206
G01 X139.19110 Y26.98233
G01 X139.18163 Y26.97336
G01 X139.06928 Y26.88357
G01 X139.03210 Y26.85581
G01 X139.01229 Y26.84471
G01 X138.87416 Y26.77044
G01 X138.86466 Y26.76544
G01 X138.80998 Y26.74524
G01 X138.68442 Y26.70463
G01 X138.67856 Y26.70328
G01 X138.66012 Y26.69894
G01 X138.59242 Y26.68657
G01 X138.49695 Y26.67392
G01 X138.43639 Y26.67092
G01 X138.36748 Y26.67092
G01 X138.30690 Y26.67392
G01 X138.21142 Y26.68655
G01 X138.16007 Y26.69531
G01 X138.14373 Y26.69894
G01 X138.11943 Y26.70463
G01 X137.99387 Y26.74524
G01 X137.93916 Y26.76544
G01 X137.92966 Y26.77044
G01 X137.89395 Y26.78964
G01 X137.81412 Y26.82637
G01 X137.78732 Y26.83676
G01 X137.74572 Y26.85436
G01 X137.72024 Y26.86607
G01 X137.56174 Y26.92020
G01 X137.54104 Y26.92510
G01 X137.46179 Y26.94735
G01 X137.45466 Y26.94966
G01 X137.45207 Y26.95040
G01 X137.37383 Y26.92188
G01 X137.30355 Y26.88131
G01 X137.29591 Y26.86689
G01 X137.25992 Y26.79884
G01 X137.22796 Y26.72172
G01 X137.17239 Y26.51812
G01 X137.16223 Y26.44100
G01 X137.15618 Y26.34875
G01 X137.15618 Y10.33001
G01 X137.15913 Y10.26575
G01 X137.16411 Y10.21145
G01 X137.19862 Y10.04574
G01 X137.22369 Y9.96862
G01 X137.25006 Y9.89776
G01 X137.32535 Y9.87794
G01 X137.40444 Y9.86113
G01 X137.47587 Y9.84957
G01 X137.48318 Y9.84835
G01 X137.54678 Y9.83743
G01 X137.57668 Y9.83296
G01 X137.69260 Y9.81808
G01 X137.76047 Y9.80596
G01 X137.76896 Y9.80400
G01 X137.90094 Y9.76255
G01 X137.93360 Y9.75140
G01 X137.96461 Y9.73616
G01 X138.08724 Y9.67215
G01 X138.09464 Y9.66753
G01 X138.15118 Y9.62811
G01 X138.22649 Y9.56997
G01 X138.26499 Y9.53504
G01 X138.31366 Y9.48638
G01 X138.34856 Y9.44787
G01 X138.40675 Y9.37256
G01 X138.44612 Y9.31607
G01 X138.45077 Y9.30863
G01 X138.51475 Y9.18605
G01 X138.52999 Y9.15503
G01 X138.54114 Y9.12234
G01 X138.58259 Y8.99039
G01 X138.58455 Y8.98183
G01 X138.59667 Y8.91406
G01 X138.60878 Y8.81965
G01 X138.61132 Y8.76779
G01 X138.61216 Y8.73332
G01 X138.61216 Y7.23332
G01 X138.61132 Y7.19888
G01 X138.60878 Y7.14699
G01 X138.59667 Y7.05257
G01 X138.58455 Y6.98478
G01 X138.58259 Y6.97625
G01 X138.54114 Y6.84432
G01 X138.52999 Y6.81160
G01 X138.51478 Y6.78062
G01 X138.45077 Y6.65801
G01 X138.44612 Y6.65059
G01 X138.40673 Y6.59405
G01 X138.35610 Y6.52857
G01 X138.33423 Y6.49865
G01 X138.31866 Y6.47615
G01 X138.31645 Y6.47300
G01 X138.27716 Y6.41689
G01 X138.23820 Y6.35539
G01 X138.19715 Y6.28379
G01 X138.19677 Y6.28308
G01 X138.16832 Y6.23332
G01 X138.19535 Y6.18194
G01 X138.25775 Y6.08087
G01 X138.27873 Y6.05179
G01 X138.30319 Y6.01572
G01 X138.31907 Y5.99083
G01 X138.35613 Y5.93807
G01 X138.40675 Y5.87257
G01 X138.44612 Y5.81605
G01 X138.45077 Y5.80863
G01 X138.51478 Y5.68603
G01 X138.52999 Y5.65504
G01 X138.54114 Y5.62233
G01 X138.58259 Y5.49040
G01 X138.58455 Y5.48186
G01 X138.59667 Y5.41407
G01 X138.60878 Y5.31966
G01 X138.61132 Y5.26779
G01 X138.61216 Y5.23335
G01 X138.61216 Y3.73333
G01 X138.61132 Y3.69886
G01 X138.60878 Y3.64699
G01 X138.59667 Y3.55258
G01 X138.58455 Y3.48479
G01 X138.58259 Y3.47625
G01 X138.54114 Y3.34433
G01 X138.52999 Y3.31161
G01 X138.51478 Y3.28062
G01 X138.45077 Y3.15802
G01 X138.44612 Y3.15060
G01 X138.40675 Y3.09409
G01 X138.34856 Y3.01877
G01 X138.31366 Y2.98027
G01 X138.26499 Y2.93160
G01 X138.22649 Y2.89668
G01 X138.15118 Y2.83854
G01 X138.09461 Y2.79909
G01 X138.08724 Y2.79449
G01 X137.96459 Y2.73046
G01 X137.93360 Y2.71524
G01 X137.90101 Y2.70412
G01 X137.76898 Y2.66264
G01 X137.76052 Y2.66071
G01 X137.69260 Y2.64857
G01 X137.59824 Y2.63648
G01 X137.54630 Y2.63391
G01 X137.47752 Y2.63391
G01 X137.42560 Y2.63648
G01 X137.33124 Y2.64857
G01 X137.26334 Y2.66071
G01 X137.25489 Y2.66264
G01 X137.12286 Y2.70412
G01 X137.09024 Y2.71527
G01 X137.05926 Y2.73046
G01 X136.93660 Y2.79449
G01 X136.92923 Y2.79909
G01 X136.87267 Y2.83854
G01 X136.79736 Y2.89668
G01 X136.75885 Y2.93160
G01 X136.71018 Y2.98027
G01 X136.67528 Y3.01877
G01 X136.61709 Y3.09409
G01 X136.57772 Y3.15060
G01 X136.57307 Y3.15799
G01 X136.50907 Y3.28065
G01 X136.49388 Y3.31161
G01 X136.48270 Y3.34433
G01 X136.44125 Y3.47628
G01 X136.43929 Y3.48479
G01 X136.42718 Y3.55263
G01 X136.41509 Y3.64699
G01 X136.41252 Y3.69891
G01 X136.41168 Y3.73333
G01 X136.41168 Y5.23335
G01 X136.41252 Y5.26774
G01 X136.41509 Y5.31966
G01 X136.42718 Y5.41402
G01 X136.43929 Y5.48186
G01 X136.44125 Y5.49037
G01 X136.48270 Y5.62233
G01 X136.49388 Y5.65504
G01 X136.50907 Y5.68600
G01 X136.57307 Y5.80866
G01 X136.57772 Y5.81605
G01 X136.61709 Y5.87257
G01 X136.66771 Y5.93807
G01 X136.68969 Y5.96812
G01 X136.70518 Y5.99050
G01 X136.74671 Y6.04983
G01 X136.78565 Y6.11125
G01 X136.82667 Y6.18285
G01 X136.82712 Y6.18361
G01 X136.85552 Y6.23332
G01 X136.82847 Y6.28476
G01 X136.76614 Y6.38575
G01 X136.74508 Y6.41493
G01 X136.72065 Y6.45090
G01 X136.70480 Y6.47582
G01 X136.66771 Y6.52860
G01 X136.61712 Y6.59405
G01 X136.57772 Y6.65059
G01 X136.57307 Y6.65801
G01 X136.50909 Y6.78064
G01 X136.49558 Y6.80790
G01 X136.49385 Y6.81166
G01 X136.48270 Y6.84432
G01 X136.44125 Y6.97627
G01 X136.43929 Y6.98478
G01 X136.42718 Y7.05265
G01 X136.41509 Y7.14699
G01 X136.41252 Y7.19895
G01 X136.41168 Y7.23332
G01 X136.41168 Y7.88646
G01 X136.41018 Y7.93238
G01 X136.40762 Y7.97129
G01 X136.39108 Y8.08473
G01 X136.37371 Y8.10830
G01 X136.32636 Y8.17000
G01 X136.26545 Y8.23949
G01 X135.96444 Y8.54051
G01 X135.93617 Y8.56837
G01 X135.93157 Y8.57287
G01 X135.90343 Y8.60009
G01 X135.88626 Y8.61617
G01 X135.83089 Y8.66639
G01 X135.78915 Y8.70177
G01 X135.77402 Y8.71379
G01 X135.72398 Y8.75651
G01 X135.70350 Y8.77525
G01 X135.64541 Y8.82461
G01 X135.56871 Y8.82461
G01 X135.48458 Y8.80977
G01 X135.41008 Y8.78981
G01 X135.32982 Y8.76060
G01 X135.25586 Y8.71790
G01 X135.25301 Y8.71551
G01 X135.25194 Y8.71328
G01 X135.21590 Y8.63753
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X135.64541 Y8.82461 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X135.64541 Y8.82461
G01 X135.64488 Y8.82506
G01 X135.64374 Y8.82880
G01 X135.62499 Y8.92300
G01 X135.61829 Y8.99131
G01 X135.61593 Y9.03931
G01 X135.61587 Y10.79783
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.26769 Y11.52630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.26769 Y11.52630
G01 X138.26885 Y11.48561
G01 X138.27089 Y11.46816
G01 X138.29735 Y11.38205
G01 X138.34122 Y11.30951
G01 X138.40111 Y11.24962
G01 X138.47365 Y11.20575
G01 X138.55976 Y11.17929
G01 X138.57721 Y11.17725
G01 X138.61793 Y11.17606
G01 X140.21792 Y11.17606
G01 X140.25861 Y11.17725
G01 X140.27609 Y11.17929
G01 X140.36219 Y11.20575
G01 X140.43474 Y11.24962
G01 X140.49463 Y11.30951
G01 X140.53850 Y11.38205
G01 X140.56496 Y11.46816
G01 X140.56700 Y11.48561
G01 X140.56819 Y11.52630
G01 X140.56819 Y13.12632
G01 X140.56700 Y13.16704
G01 X140.56496 Y13.18449
G01 X140.53850 Y13.27060
G01 X140.49463 Y13.34314
G01 X140.43474 Y13.40303
G01 X140.36595 Y13.44492
G01 X140.36217 Y13.44690
G01 X140.27609 Y13.47336
G01 X140.25864 Y13.47540
G01 X140.21792 Y13.47656
G01 X138.61793 Y13.47656
G01 X138.57724 Y13.47540
G01 X138.55973 Y13.47336
G01 X138.47365 Y13.44690
G01 X138.40111 Y13.40303
G01 X138.34119 Y13.34314
G01 X138.29735 Y13.27060
G01 X138.28719 Y13.24194
G01 X138.27089 Y13.18452
G01 X138.26885 Y13.16704
G01 X138.26769 Y13.12632
G01 X138.26769 Y11.52630
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y12.68383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y12.68383
G01 X143.52891 Y12.71832
G01 X143.54339 Y12.88510
G01 X143.54799 Y12.91342
G01 X143.56237 Y12.98076
G01 X143.58916 Y13.08167
G01 X143.61926 Y13.16836
G01 X143.64502 Y13.23224
G01 X143.66232 Y13.26973
G01 X143.73752 Y13.40504
G01 X143.76181 Y13.44547
G01 X143.77535 Y13.46275
G01 X143.88860 Y13.60273
G01 X143.89958 Y13.61438
G01 X143.94921 Y13.66221
G01 X144.03732 Y13.73912
G01 X144.10072 Y13.78660
G01 X144.15772 Y13.82508
G01 X144.20387 Y13.85304
G01 X144.33064 Y13.91741
G01 X144.38505 Y13.94220
G01 X144.39396 Y13.94499
G01 X144.57821 Y14.00133
G01 X144.58149 Y14.00209
G01 X144.64946 Y14.01395
G01 X144.77804 Y14.02995
G01 X144.84456 Y14.03323
G01 X144.91334 Y14.03323
G01 X144.97981 Y14.02995
G01 X145.10839 Y14.01395
G01 X145.17636 Y14.00209
G01 X145.17964 Y14.00133
G01 X145.36389 Y13.94497
G01 X145.37278 Y13.94220
G01 X145.42721 Y13.91741
G01 X145.55398 Y13.85304
G01 X145.60013 Y13.82508
G01 X145.65713 Y13.78660
G01 X145.72053 Y13.73912
G01 X145.80864 Y13.66221
G01 X145.85827 Y13.61438
G01 X145.86925 Y13.60273
G01 X145.98250 Y13.46275
G01 X145.99604 Y13.44547
G01 X146.02032 Y13.40504
G01 X146.09553 Y13.26973
G01 X146.11283 Y13.23224
G01 X146.13859 Y13.16836
G01 X146.16874 Y13.08154
G01 X146.19548 Y12.98076
G01 X146.20986 Y12.91342
G01 X146.21446 Y12.88513
G01 X146.22893 Y12.71832
G01 X146.23107 Y12.68383
G01 X146.22893 Y12.64931
G01 X146.22264 Y12.57669
G01 X146.21446 Y12.48251
G01 X146.20986 Y12.45424
G01 X146.19548 Y12.38690
G01 X146.16869 Y12.28596
G01 X146.13859 Y12.19930
G01 X146.11283 Y12.13544
G01 X146.09553 Y12.09795
G01 X146.02032 Y11.96260
G01 X145.99604 Y11.92219
G01 X145.98250 Y11.90489
G01 X145.86927 Y11.76493
G01 X145.85827 Y11.75325
G01 X145.80864 Y11.70545
G01 X145.72050 Y11.62851
G01 X145.65713 Y11.58104
G01 X145.60008 Y11.54253
G01 X145.55398 Y11.51462
G01 X145.42716 Y11.45023
G01 X145.37280 Y11.42546
G01 X145.36389 Y11.42270
G01 X145.17964 Y11.36631
G01 X145.17636 Y11.36557
G01 X145.10844 Y11.35371
G01 X144.97981 Y11.33768
G01 X144.91337 Y11.33440
G01 X144.84451 Y11.33440
G01 X144.77804 Y11.33768
G01 X144.64941 Y11.35371
G01 X144.58149 Y11.36557
G01 X144.57821 Y11.36631
G01 X144.39396 Y11.42270
G01 X144.38505 Y11.42546
G01 X144.33069 Y11.45023
G01 X144.20387 Y11.51462
G01 X144.15777 Y11.54253
G01 X144.10072 Y11.58104
G01 X144.03735 Y11.62851
G01 X143.94921 Y11.70545
G01 X143.89958 Y11.75325
G01 X143.88858 Y11.76493
G01 X143.77535 Y11.90489
G01 X143.76181 Y11.92219
G01 X143.73752 Y11.96260
G01 X143.69008 Y12.04797
G01 X143.66232 Y12.09793
G01 X143.64502 Y12.13544
G01 X143.61926 Y12.19930
G01 X143.58916 Y12.28599
G01 X143.56237 Y12.38690
G01 X143.54799 Y12.45424
G01 X143.54339 Y12.48256
G01 X143.52891 Y12.64931
G01 X143.52678 Y12.68383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y17.68382 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y17.68382
G01 X143.52891 Y17.71834
G01 X143.54339 Y17.88509
G01 X143.54799 Y17.91341
G01 X143.56237 Y17.98075
G01 X143.58916 Y18.08166
G01 X143.61926 Y18.16835
G01 X143.64502 Y18.23221
G01 X143.66232 Y18.26972
G01 X143.73752 Y18.40505
G01 X143.76181 Y18.44546
G01 X143.77535 Y18.46276
G01 X143.88860 Y18.60274
G01 X143.89958 Y18.61440
G01 X143.94921 Y18.66220
G01 X144.03735 Y18.73914
G01 X144.10072 Y18.78661
G01 X144.15777 Y18.82512
G01 X144.20387 Y18.85303
G01 X144.33069 Y18.91742
G01 X144.38502 Y18.94219
G01 X144.39396 Y18.94498
G01 X144.57821 Y19.00134
G01 X144.58149 Y19.00208
G01 X144.64941 Y19.01394
G01 X144.77804 Y19.02997
G01 X144.84451 Y19.03325
G01 X144.91337 Y19.03325
G01 X144.97981 Y19.02997
G01 X145.10844 Y19.01394
G01 X145.17636 Y19.00208
G01 X145.17964 Y19.00134
G01 X145.36389 Y18.94496
G01 X145.37280 Y18.94219
G01 X145.42716 Y18.91742
G01 X145.55398 Y18.85303
G01 X145.60008 Y18.82512
G01 X145.65713 Y18.78661
G01 X145.72053 Y18.73911
G01 X145.73899 Y18.72301
G01 X145.80864 Y18.66220
G01 X145.85827 Y18.61440
G01 X145.86925 Y18.60274
G01 X145.98250 Y18.46276
G01 X145.99604 Y18.44546
G01 X146.02032 Y18.40505
G01 X146.09553 Y18.26970
G01 X146.11283 Y18.23221
G01 X146.13859 Y18.16835
G01 X146.15505 Y18.12101
G01 X146.16869 Y18.08166
G01 X146.18370 Y18.02520
G01 X146.19548 Y17.98075
G01 X146.20986 Y17.91341
G01 X146.21446 Y17.88512
G01 X146.22893 Y17.71834
G01 X146.23107 Y17.68382
G01 X146.23018 Y17.66609
G01 X146.22893 Y17.64933
G01 X146.21446 Y17.48255
G01 X146.20986 Y17.45423
G01 X146.19548 Y17.38689
G01 X146.16869 Y17.28598
G01 X146.13859 Y17.19929
G01 X146.11283 Y17.13541
G01 X146.09553 Y17.09792
G01 X146.02032 Y16.96261
G01 X145.99604 Y16.92218
G01 X145.98250 Y16.90490
G01 X145.86925 Y16.76492
G01 X145.85827 Y16.75327
G01 X145.80864 Y16.70544
G01 X145.72050 Y16.62850
G01 X145.65713 Y16.58105
G01 X145.60013 Y16.54257
G01 X145.55398 Y16.51461
G01 X145.42721 Y16.45024
G01 X145.37278 Y16.42545
G01 X145.36389 Y16.42268
G01 X145.17964 Y16.36632
G01 X145.17636 Y16.36556
G01 X145.10839 Y16.35370
G01 X144.97981 Y16.33770
G01 X144.91334 Y16.33442
G01 X144.84456 Y16.33442
G01 X144.77804 Y16.33770
G01 X144.64946 Y16.35370
G01 X144.58149 Y16.36559
G01 X144.57821 Y16.36632
G01 X144.39396 Y16.42268
G01 X144.38505 Y16.42545
G01 X144.33064 Y16.45024
G01 X144.20387 Y16.51461
G01 X144.15772 Y16.54257
G01 X144.10072 Y16.58105
G01 X144.03735 Y16.62850
G01 X143.94921 Y16.70544
G01 X143.89958 Y16.75327
G01 X143.88860 Y16.76492
G01 X143.77535 Y16.90490
G01 X143.76181 Y16.92218
G01 X143.73752 Y16.96261
G01 X143.71134 Y17.00970
G01 X143.66234 Y17.09792
G01 X143.64502 Y17.13541
G01 X143.61926 Y17.19929
G01 X143.58916 Y17.28598
G01 X143.56237 Y17.38689
G01 X143.54799 Y17.45423
G01 X143.54339 Y17.48255
G01 X143.52891 Y17.64933
G01 X143.52678 Y17.68382
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.17627 Y20.98780 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.17627 Y20.98780
G01 X140.17324 Y20.99027
G01 X140.09339 Y21.04363
G01 X139.95506 Y21.11757
G01 X139.86634 Y21.15432
G01 X139.71625 Y21.19984
G01 X139.69494 Y21.20408
G01 X139.69522 Y21.20418
G01 X139.73227 Y21.25364
G01 X139.77086 Y21.32986
G01 X139.79560 Y21.41165
G01 X139.80256 Y21.44487
G01 X139.78579 Y21.49250
G01 X139.73756 Y21.60667
G01 X139.70113 Y21.67927
G01 X139.68793 Y21.70441
G01 X139.65016 Y21.77320
G01 X139.62326 Y21.81825
G01 X139.60106 Y21.85252
G01 X139.58622 Y21.87645
G01 X139.54927 Y21.93885
G01 X139.51239 Y22.01480
G01 X139.48539 Y22.07812
G01 X139.47261 Y22.11269
G01 X139.44043 Y22.22839
G01 X139.43238 Y22.26029
G01 X139.42527 Y22.29562
G01 X139.42504 Y22.29679
G01 X139.41099 Y22.45181
G01 X139.40870 Y22.48633
G01 X139.41097 Y22.52082
G01 X139.42504 Y22.67586
G01 X139.42524 Y22.67700
G01 X139.44043 Y22.74426
G01 X139.47261 Y22.85996
G01 X139.48539 Y22.89453
G01 X139.51239 Y22.95785
G01 X139.54927 Y23.03380
G01 X139.58622 Y23.09620
G01 X139.62417 Y23.15363
G01 X139.65303 Y23.19298
G01 X139.72399 Y23.27461
G01 X139.77175 Y23.32435
G01 X139.78122 Y23.33329
G01 X139.89356 Y23.42310
G01 X139.93075 Y23.45086
G01 X139.95056 Y23.46194
G01 X140.08866 Y23.53621
G01 X140.09821 Y23.54124
G01 X140.15287 Y23.56146
G01 X140.27840 Y23.60202
G01 X140.30273 Y23.60771
G01 X140.37042 Y23.62008
G01 X140.46590 Y23.63275
G01 X140.52648 Y23.63573
G01 X140.59539 Y23.63573
G01 X140.65595 Y23.63275
G01 X140.75142 Y23.62008
G01 X140.81912 Y23.60771
G01 X140.84345 Y23.60202
G01 X140.96898 Y23.56146
G01 X141.02366 Y23.54124
G01 X141.03319 Y23.53621
G01 X141.17129 Y23.46194
G01 X141.19110 Y23.45089
G01 X141.22828 Y23.42310
G01 X141.34063 Y23.33331
G01 X141.35010 Y23.32435
G01 X141.39785 Y23.27461
G01 X141.46882 Y23.19298
G01 X141.49768 Y23.15363
G01 X141.53562 Y23.09620
G01 X141.57258 Y23.03380
G01 X141.60946 Y22.95785
G01 X141.63646 Y22.89453
G01 X141.64924 Y22.85996
G01 X141.68142 Y22.74426
G01 X141.69661 Y22.67700
G01 X141.69679 Y22.67589
G01 X141.69872 Y22.65473
G01 X141.71086 Y22.52082
G01 X141.71314 Y22.48630
G01 X141.71086 Y22.45181
G01 X141.69681 Y22.29679
G01 X141.69661 Y22.29562
G01 X141.68142 Y22.22839
G01 X141.64924 Y22.11269
G01 X141.63646 Y22.07812
G01 X141.60946 Y22.01480
G01 X141.57258 Y21.93885
G01 X141.53562 Y21.87645
G01 X141.49768 Y21.81902
G01 X141.46882 Y21.77967
G01 X141.39785 Y21.69804
G01 X141.35010 Y21.64830
G01 X141.34063 Y21.63936
G01 X141.22828 Y21.54955
G01 X141.19110 Y21.52179
G01 X141.17129 Y21.51071
G01 X141.03319 Y21.43644
G01 X141.02364 Y21.43141
G01 X140.96898 Y21.41119
G01 X140.84345 Y21.37063
G01 X140.81912 Y21.36494
G01 X140.75142 Y21.35257
G01 X140.71332 Y21.34752
G01 X140.64086 Y21.33405
G01 X140.59674 Y21.32346
G01 X140.58076 Y21.31980
G01 X140.52359 Y21.30744
G01 X140.39123 Y21.26728
G01 X140.36085 Y21.25544
G01 X140.30944 Y21.23700
G01 X140.28363 Y21.22847
G01 X140.24657 Y21.17901
G01 X140.20799 Y21.10279
G01 X140.18325 Y21.02100
G01 X140.17627 Y20.98780
G01 X140.19306 Y20.94015
G01 X140.24129 Y20.82598
G01 X140.27771 Y20.75338
G01 X140.29092 Y20.72824
G01 X140.32869 Y20.65946
G01 X140.35559 Y20.61440
G01 X140.37779 Y20.58013
G01 X140.39262 Y20.55620
G01 X140.42958 Y20.49380
G01 X140.46646 Y20.41785
G01 X140.49346 Y20.35453
G01 X140.50624 Y20.31996
G01 X140.53842 Y20.20426
G01 X140.55361 Y20.13700
G01 X140.55381 Y20.13586
G01 X140.56788 Y19.98082
G01 X140.57014 Y19.94633
G01 X140.56786 Y19.91181
G01 X140.55381 Y19.75679
G01 X140.55361 Y19.75562
G01 X140.53842 Y19.68839
G01 X140.50624 Y19.57269
G01 X140.49346 Y19.53812
G01 X140.46646 Y19.47480
G01 X140.42958 Y19.39885
G01 X140.39262 Y19.33645
G01 X140.35468 Y19.27902
G01 X140.32582 Y19.23967
G01 X140.25485 Y19.15804
G01 X140.20710 Y19.10830
G01 X140.19763 Y19.09936
G01 X140.08528 Y19.00955
G01 X140.04810 Y18.98179
G01 X140.02829 Y18.97071
G01 X139.89019 Y18.89644
G01 X139.88064 Y18.89141
G01 X139.82598 Y18.87119
G01 X139.70045 Y18.83063
G01 X139.69456 Y18.82926
G01 X139.67612 Y18.82494
G01 X139.60842 Y18.81257
G01 X139.51295 Y18.79990
G01 X139.45239 Y18.79692
G01 X139.38348 Y18.79692
G01 X139.32290 Y18.79990
G01 X139.22742 Y18.81255
G01 X139.17607 Y18.82131
G01 X139.15973 Y18.82494
G01 X139.13543 Y18.83063
G01 X139.00987 Y18.87119
G01 X138.95521 Y18.89141
G01 X138.94566 Y18.89644
G01 X138.80756 Y18.97071
G01 X138.78775 Y18.98179
G01 X138.75056 Y19.00955
G01 X138.63822 Y19.09936
G01 X138.62875 Y19.10830
G01 X138.58099 Y19.15804
G01 X138.51003 Y19.23967
G01 X138.48117 Y19.27902
G01 X138.44323 Y19.33645
G01 X138.40627 Y19.39885
G01 X138.36939 Y19.47480
G01 X138.34239 Y19.53812
G01 X138.32961 Y19.57272
G01 X138.29743 Y19.68839
G01 X138.28729 Y19.72959
G01 X138.28224 Y19.75562
G01 X138.28206 Y19.75677
G01 X138.26799 Y19.91181
G01 X138.26570 Y19.94633
G01 X138.26796 Y19.98082
G01 X138.28204 Y20.13586
G01 X138.28224 Y20.13700
G01 X138.29743 Y20.20426
G01 X138.32961 Y20.31996
G01 X138.34239 Y20.35453
G01 X138.36939 Y20.41785
G01 X138.40627 Y20.49380
G01 X138.44323 Y20.55620
G01 X138.48117 Y20.61363
G01 X138.51003 Y20.65298
G01 X138.58099 Y20.73461
G01 X138.62875 Y20.78435
G01 X138.63822 Y20.79329
G01 X138.75056 Y20.88310
G01 X138.78775 Y20.91087
G01 X138.80756 Y20.92194
G01 X138.94566 Y20.99621
G01 X138.95521 Y21.00124
G01 X139.00987 Y21.02146
G01 X139.13540 Y21.06202
G01 X139.15973 Y21.06771
G01 X139.22742 Y21.08008
G01 X139.26552 Y21.08513
G01 X139.33799 Y21.09860
G01 X139.38216 Y21.10919
G01 X139.39809 Y21.11282
G01 X139.45531 Y21.12522
G01 X139.58762 Y21.16537
G01 X139.61800 Y21.17721
G01 X139.66941 Y21.19565
G01 X139.69494 Y21.20408
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.80256 Y21.44487 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.80256 Y21.44487
G01 X139.80563 Y21.44236
G01 X139.88549 Y21.38899
G01 X140.02382 Y21.31506
G01 X140.11254 Y21.27830
G01 X140.26263 Y21.23278
G01 X140.28389 Y21.22857
G01 X140.30944 Y21.23700
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X143.52678 Y22.68381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X143.52678 Y22.68381
G01 X143.52891 Y22.71833
G01 X143.54339 Y22.88511
G01 X143.54799 Y22.91343
G01 X143.56237 Y22.98076
G01 X143.58916 Y23.08168
G01 X143.61926 Y23.16834
G01 X143.64502 Y23.23220
G01 X143.66232 Y23.26969
G01 X143.73752 Y23.40504
G01 X143.76181 Y23.44545
G01 X143.77535 Y23.46275
G01 X143.88860 Y23.60273
G01 X143.89958 Y23.61439
G01 X143.94921 Y23.66219
G01 X144.03735 Y23.73913
G01 X144.10072 Y23.78660
G01 X144.15777 Y23.82511
G01 X144.20389 Y23.85305
G01 X144.33067 Y23.91744
G01 X144.38505 Y23.94218
G01 X144.39391 Y23.94495
G01 X144.57819 Y24.00133
G01 X144.58147 Y24.00207
G01 X144.64946 Y24.01396
G01 X144.77804 Y24.02996
G01 X144.84456 Y24.03324
G01 X144.91334 Y24.03324
G01 X144.97981 Y24.02996
G01 X145.10839 Y24.01396
G01 X145.17638 Y24.00207
G01 X145.17964 Y24.00133
G01 X145.36394 Y23.94495
G01 X145.37280 Y23.94218
G01 X145.42716 Y23.91741
G01 X145.55398 Y23.85302
G01 X145.60008 Y23.82511
G01 X145.65713 Y23.78660
G01 X145.72050 Y23.73916
G01 X145.80864 Y23.66219
G01 X145.84524 Y23.62788
G01 X145.85827 Y23.61439
G01 X145.86927 Y23.60271
G01 X145.93059 Y23.52694
G01 X145.98250 Y23.46275
G01 X145.99604 Y23.44548
G01 X146.02032 Y23.40504
G01 X146.09553 Y23.26971
G01 X146.11283 Y23.23220
G01 X146.13859 Y23.16834
G01 X146.16869 Y23.08168
G01 X146.19548 Y22.98076
G01 X146.20986 Y22.91343
G01 X146.21446 Y22.88511
G01 X146.22893 Y22.71833
G01 X146.22977 Y22.70789
G01 X146.23107 Y22.68386
G01 X146.22893 Y22.64932
G01 X146.21446 Y22.48254
G01 X146.20986 Y22.45422
G01 X146.19548 Y22.38688
G01 X146.16869 Y22.28597
G01 X146.13859 Y22.19931
G01 X146.11283 Y22.13545
G01 X146.09553 Y22.09796
G01 X146.02032 Y21.96260
G01 X145.99604 Y21.92219
G01 X145.98250 Y21.90489
G01 X145.86927 Y21.76494
G01 X145.85827 Y21.75326
G01 X145.80864 Y21.70545
G01 X145.72050 Y21.62852
G01 X145.65713 Y21.58104
G01 X145.60008 Y21.54254
G01 X145.55395 Y21.51460
G01 X145.42716 Y21.45023
G01 X145.37280 Y21.42547
G01 X145.36394 Y21.42270
G01 X145.17964 Y21.36631
G01 X145.17638 Y21.36558
G01 X145.10839 Y21.35369
G01 X144.97981 Y21.33769
G01 X144.91334 Y21.33441
G01 X144.84456 Y21.33441
G01 X144.77804 Y21.33769
G01 X144.64946 Y21.35369
G01 X144.58147 Y21.36558
G01 X144.57821 Y21.36631
G01 X144.39391 Y21.42270
G01 X144.38505 Y21.42547
G01 X144.33069 Y21.45023
G01 X144.20389 Y21.51460
G01 X144.15777 Y21.54254
G01 X144.10072 Y21.58104
G01 X144.03735 Y21.62852
G01 X143.94921 Y21.70545
G01 X143.89958 Y21.75326
G01 X143.88858 Y21.76494
G01 X143.77535 Y21.90489
G01 X143.76181 Y21.92219
G01 X143.73752 Y21.96260
G01 X143.66234 Y22.09793
G01 X143.64502 Y22.13545
G01 X143.61926 Y22.19931
G01 X143.58916 Y22.28597
G01 X143.56237 Y22.38688
G01 X143.54799 Y22.45422
G01 X143.54339 Y22.48254
G01 X143.52891 Y22.64932
G01 X143.52678 Y22.68381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y22.68381 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y22.68381
G01 X151.02892 Y22.64937
G01 X151.04338 Y22.48252
G01 X151.04798 Y22.45427
G01 X151.06238 Y22.38683
G01 X151.08915 Y22.28600
G01 X151.11927 Y22.19925
G01 X151.14500 Y22.13545
G01 X151.16230 Y22.09796
G01 X151.19890 Y22.03215
G01 X151.23754 Y21.96260
G01 X151.26182 Y21.92217
G01 X151.27533 Y21.90492
G01 X151.38856 Y21.76494
G01 X151.39954 Y21.75328
G01 X151.44919 Y21.70545
G01 X151.53733 Y21.62852
G01 X151.60070 Y21.58104
G01 X151.65778 Y21.54254
G01 X151.70390 Y21.51460
G01 X151.83070 Y21.45021
G01 X151.88506 Y21.42547
G01 X151.89390 Y21.42270
G01 X152.07815 Y21.36631
G01 X152.08142 Y21.36558
G01 X152.14945 Y21.35369
G01 X152.27805 Y21.33769
G01 X152.34454 Y21.33441
G01 X152.41330 Y21.33441
G01 X152.47980 Y21.33769
G01 X152.60840 Y21.35369
G01 X152.67642 Y21.36558
G01 X152.67965 Y21.36631
G01 X152.86395 Y21.42270
G01 X152.87279 Y21.42547
G01 X152.92714 Y21.45021
G01 X153.05394 Y21.51460
G01 X153.10007 Y21.54254
G01 X153.15714 Y21.58104
G01 X153.22051 Y21.62852
G01 X153.30865 Y21.70545
G01 X153.35831 Y21.75328
G01 X153.36928 Y21.76494
G01 X153.48251 Y21.90492
G01 X153.49605 Y21.92219
G01 X153.52031 Y21.96260
G01 X153.59552 Y22.09796
G01 X153.61284 Y22.13545
G01 X153.63857 Y22.19925
G01 X153.66870 Y22.28600
G01 X153.69547 Y22.38683
G01 X153.70987 Y22.45427
G01 X153.71447 Y22.48254
G01 X153.72892 Y22.64937
G01 X153.73105 Y22.68379
G01 X153.72976 Y22.70776
G01 X153.72973 Y22.70802
G01 X153.72892 Y22.71828
G01 X153.72823 Y22.72636
G01 X153.71447 Y22.88513
G01 X153.70987 Y22.91338
G01 X153.69547 Y22.98081
G01 X153.66870 Y23.08168
G01 X153.63857 Y23.16839
G01 X153.61284 Y23.23220
G01 X153.59552 Y23.26971
G01 X153.52031 Y23.40504
G01 X153.49605 Y23.44545
G01 X153.48251 Y23.46273
G01 X153.43055 Y23.52696
G01 X153.36926 Y23.60273
G01 X153.35831 Y23.61436
G01 X153.34525 Y23.62788
G01 X153.30865 Y23.66219
G01 X153.22051 Y23.73916
G01 X153.15714 Y23.78660
G01 X153.10007 Y23.82511
G01 X153.05397 Y23.85302
G01 X152.92714 Y23.91744
G01 X152.87276 Y23.94218
G01 X152.86395 Y23.94495
G01 X152.67965 Y24.00133
G01 X152.67642 Y24.00207
G01 X152.60840 Y24.01396
G01 X152.47980 Y24.02996
G01 X152.41330 Y24.03324
G01 X152.34454 Y24.03324
G01 X152.27805 Y24.02996
G01 X152.14945 Y24.01396
G01 X152.08142 Y24.00207
G01 X152.07820 Y24.00133
G01 X151.89390 Y23.94495
G01 X151.88506 Y23.94218
G01 X151.83070 Y23.91744
G01 X151.70390 Y23.85305
G01 X151.65778 Y23.82511
G01 X151.60070 Y23.78660
G01 X151.53733 Y23.73913
G01 X151.44919 Y23.66219
G01 X151.39954 Y23.61436
G01 X151.38856 Y23.60271
G01 X151.27533 Y23.46273
G01 X151.26179 Y23.44545
G01 X151.23754 Y23.40504
G01 X151.16233 Y23.26969
G01 X151.14500 Y23.23220
G01 X151.11927 Y23.16839
G01 X151.08915 Y23.08165
G01 X151.06238 Y22.98081
G01 X151.04798 Y22.91338
G01 X151.04338 Y22.88513
G01 X151.02892 Y22.71828
G01 X151.02679 Y22.68381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y22.57390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y22.57390
G01 X156.37677 Y22.48737
G01 X156.40049 Y22.28119
G01 X156.40529 Y22.24698
G01 X156.41395 Y22.21353
G01 X156.47095 Y22.01394
G01 X156.50014 Y21.93238
G01 X156.52648 Y21.86880
G01 X156.56351 Y21.79047
G01 X156.66432 Y21.60906
G01 X156.68185 Y21.57929
G01 X156.70265 Y21.55168
G01 X156.83168 Y21.38912
G01 X156.88985 Y21.32494
G01 X156.93854 Y21.27624
G01 X157.00270 Y21.21808
G01 X157.16529 Y21.08905
G01 X157.19287 Y21.06824
G01 X157.22266 Y21.05072
G01 X157.40410 Y20.94990
G01 X157.48240 Y20.91287
G01 X157.54596 Y20.88653
G01 X157.62746 Y20.85737
G01 X157.82711 Y20.80035
G01 X157.86059 Y20.79169
G01 X157.89480 Y20.78689
G01 X158.10097 Y20.76319
G01 X158.18751 Y20.75892
G01 X158.22190 Y20.75808
G01 X159.22192 Y20.75808
G01 X159.25634 Y20.75892
G01 X159.34288 Y20.76319
G01 X159.54905 Y20.78689
G01 X159.58329 Y20.79169
G01 X159.61674 Y20.80035
G01 X159.81631 Y20.85735
G01 X159.89789 Y20.88653
G01 X159.96144 Y20.91287
G01 X160.03975 Y20.94990
G01 X160.22118 Y21.05072
G01 X160.25098 Y21.06824
G01 X160.27856 Y21.08905
G01 X160.44115 Y21.21808
G01 X160.50531 Y21.27624
G01 X160.55400 Y21.32494
G01 X160.61217 Y21.38912
G01 X160.74120 Y21.55168
G01 X160.76200 Y21.57929
G01 X160.77953 Y21.60906
G01 X160.88034 Y21.79047
G01 X160.91737 Y21.86880
G01 X160.94371 Y21.93238
G01 X160.97290 Y22.01394
G01 X161.02990 Y22.21353
G01 X161.03856 Y22.24696
G01 X161.04336 Y22.28119
G01 X161.06708 Y22.48737
G01 X161.07132 Y22.57390
G01 X161.07132 Y22.64276
G01 X161.06708 Y22.72928
G01 X161.04336 Y22.93547
G01 X161.03856 Y22.96969
G01 X161.02990 Y23.00314
G01 X160.97290 Y23.20271
G01 X160.94371 Y23.28429
G01 X160.91737 Y23.34784
G01 X160.88034 Y23.42618
G01 X160.77953 Y23.60758
G01 X160.76200 Y23.63735
G01 X160.74120 Y23.66496
G01 X160.61217 Y23.82752
G01 X160.55400 Y23.89171
G01 X160.50531 Y23.94040
G01 X160.44112 Y23.99857
G01 X160.27856 Y24.12760
G01 X160.25095 Y24.14840
G01 X160.22118 Y24.16593
G01 X160.03983 Y24.26671
G01 X159.96144 Y24.30377
G01 X159.89789 Y24.33011
G01 X159.81631 Y24.35930
G01 X159.61674 Y24.41629
G01 X159.58326 Y24.42501
G01 X159.54908 Y24.42976
G01 X159.34285 Y24.45348
G01 X159.25637 Y24.45777
G01 X159.22192 Y24.45858
G01 X158.22190 Y24.45858
G01 X158.18748 Y24.45777
G01 X158.10100 Y24.45348
G01 X157.89477 Y24.42976
G01 X157.86059 Y24.42501
G01 X157.82711 Y24.41629
G01 X157.62754 Y24.35930
G01 X157.54596 Y24.33011
G01 X157.48240 Y24.30377
G01 X157.40407 Y24.26674
G01 X157.22266 Y24.16593
G01 X157.19290 Y24.14840
G01 X157.16529 Y24.12760
G01 X157.00273 Y23.99857
G01 X156.93854 Y23.94040
G01 X156.88985 Y23.89171
G01 X156.83171 Y23.82755
G01 X156.75490 Y23.73077
G01 X156.70265 Y23.66496
G01 X156.68182 Y23.63735
G01 X156.66432 Y23.60758
G01 X156.56351 Y23.42618
G01 X156.52648 Y23.34784
G01 X156.50014 Y23.28429
G01 X156.47095 Y23.20271
G01 X156.41395 Y23.00314
G01 X156.40529 Y22.96969
G01 X156.40049 Y22.93547
G01 X156.37677 Y22.72928
G01 X156.37253 Y22.64276
G01 X156.37253 Y22.57390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y17.49390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y17.49390
G01 X156.37677 Y17.40737
G01 X156.40049 Y17.20120
G01 X156.40529 Y17.16698
G01 X156.41395 Y17.13353
G01 X156.47095 Y16.93394
G01 X156.50014 Y16.85238
G01 X156.52648 Y16.78880
G01 X156.56351 Y16.71049
G01 X156.66432 Y16.52906
G01 X156.68185 Y16.49927
G01 X156.70265 Y16.47168
G01 X156.83168 Y16.30912
G01 X156.88985 Y16.24494
G01 X156.93854 Y16.19624
G01 X157.00270 Y16.13808
G01 X157.16529 Y16.00905
G01 X157.19287 Y15.98824
G01 X157.22266 Y15.97072
G01 X157.40410 Y15.86990
G01 X157.48240 Y15.83287
G01 X157.54596 Y15.80653
G01 X157.62751 Y15.77735
G01 X157.69754 Y15.75736
G01 X157.82711 Y15.72035
G01 X157.86051 Y15.71169
G01 X157.89480 Y15.70689
G01 X158.10100 Y15.68319
G01 X158.18751 Y15.67892
G01 X158.22190 Y15.67808
G01 X159.22192 Y15.67808
G01 X159.25634 Y15.67892
G01 X159.34288 Y15.68319
G01 X159.54905 Y15.70689
G01 X159.58329 Y15.71169
G01 X159.61674 Y15.72035
G01 X159.81631 Y15.77735
G01 X159.89789 Y15.80653
G01 X159.96144 Y15.83287
G01 X160.03975 Y15.86990
G01 X160.22118 Y15.97072
G01 X160.25098 Y15.98824
G01 X160.27856 Y16.00905
G01 X160.44115 Y16.13808
G01 X160.50531 Y16.19624
G01 X160.55400 Y16.24494
G01 X160.61217 Y16.30912
G01 X160.74120 Y16.47168
G01 X160.76200 Y16.49929
G01 X160.77953 Y16.52906
G01 X160.88034 Y16.71047
G01 X160.91737 Y16.78880
G01 X160.94371 Y16.85238
G01 X160.97290 Y16.93394
G01 X161.01397 Y17.07773
G01 X161.02990 Y17.13353
G01 X161.03856 Y17.16696
G01 X161.04336 Y17.20120
G01 X161.06708 Y17.40737
G01 X161.07132 Y17.49390
G01 X161.07132 Y17.56276
G01 X161.06708 Y17.64928
G01 X161.04336 Y17.85547
G01 X161.03856 Y17.88969
G01 X161.02990 Y17.92314
G01 X160.97290 Y18.12271
G01 X160.94371 Y18.20429
G01 X160.91737 Y18.26784
G01 X160.88034 Y18.34618
G01 X160.77953 Y18.52758
G01 X160.76200 Y18.55735
G01 X160.74120 Y18.58496
G01 X160.61217 Y18.74752
G01 X160.55400 Y18.81171
G01 X160.50531 Y18.86040
G01 X160.44112 Y18.91857
G01 X160.27856 Y19.04760
G01 X160.25098 Y19.06840
G01 X160.22118 Y19.08593
G01 X160.14123 Y19.13035
G01 X160.03975 Y19.18674
G01 X159.96144 Y19.22377
G01 X159.89789 Y19.25011
G01 X159.81631 Y19.27930
G01 X159.61674 Y19.33629
G01 X159.58326 Y19.34498
G01 X159.54908 Y19.34976
G01 X159.34285 Y19.37348
G01 X159.25637 Y19.37775
G01 X159.22192 Y19.37858
G01 X158.22190 Y19.37858
G01 X158.18748 Y19.37775
G01 X158.10100 Y19.37348
G01 X157.89477 Y19.34976
G01 X157.86059 Y19.34498
G01 X157.82711 Y19.33629
G01 X157.62754 Y19.27930
G01 X157.54596 Y19.25011
G01 X157.48240 Y19.22377
G01 X157.40407 Y19.18674
G01 X157.22266 Y19.08593
G01 X157.19290 Y19.06840
G01 X157.16529 Y19.04760
G01 X157.00273 Y18.91857
G01 X156.93854 Y18.86040
G01 X156.88985 Y18.81171
G01 X156.83168 Y18.74752
G01 X156.70265 Y18.58496
G01 X156.68185 Y18.55735
G01 X156.66432 Y18.52758
G01 X156.56351 Y18.34618
G01 X156.52648 Y18.26784
G01 X156.50014 Y18.20429
G01 X156.47095 Y18.12271
G01 X156.41395 Y17.92314
G01 X156.40529 Y17.88969
G01 X156.40049 Y17.85547
G01 X156.37677 Y17.64928
G01 X156.37253 Y17.56276
G01 X156.37253 Y17.49390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X156.37253 Y12.41390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X156.37253 Y12.41390
G01 X156.37677 Y12.32737
G01 X156.40049 Y12.12120
G01 X156.40529 Y12.08698
G01 X156.41395 Y12.05353
G01 X156.47095 Y11.85394
G01 X156.50014 Y11.77238
G01 X156.52648 Y11.70880
G01 X156.56351 Y11.63049
G01 X156.66432 Y11.44906
G01 X156.68185 Y11.41927
G01 X156.70265 Y11.39168
G01 X156.83168 Y11.22912
G01 X156.88985 Y11.16494
G01 X156.93854 Y11.11624
G01 X157.00270 Y11.05808
G01 X157.16529 Y10.92905
G01 X157.19287 Y10.90824
G01 X157.22266 Y10.89072
G01 X157.40410 Y10.78990
G01 X157.48240 Y10.75287
G01 X157.54596 Y10.72653
G01 X157.62751 Y10.69735
G01 X157.69754 Y10.67736
G01 X157.82711 Y10.64035
G01 X157.86059 Y10.63169
G01 X157.89480 Y10.62689
G01 X158.10097 Y10.60319
G01 X158.18751 Y10.59892
G01 X158.22190 Y10.59808
G01 X159.22192 Y10.59808
G01 X159.25634 Y10.59892
G01 X159.34288 Y10.60319
G01 X159.54905 Y10.62689
G01 X159.58329 Y10.63169
G01 X159.61674 Y10.64035
G01 X159.81631 Y10.69735
G01 X159.89789 Y10.72653
G01 X159.96144 Y10.75287
G01 X160.03975 Y10.78990
G01 X160.22118 Y10.89072
G01 X160.25098 Y10.90824
G01 X160.27856 Y10.92905
G01 X160.44115 Y11.05808
G01 X160.50531 Y11.11624
G01 X160.55400 Y11.16494
G01 X160.61217 Y11.22912
G01 X160.74120 Y11.39168
G01 X160.76200 Y11.41929
G01 X160.77953 Y11.44906
G01 X160.88034 Y11.63047
G01 X160.91737 Y11.70880
G01 X160.94054 Y11.76369
G01 X160.94371 Y11.77238
G01 X160.97290 Y11.85394
G01 X160.99164 Y11.91960
G01 X161.02990 Y12.05353
G01 X161.03856 Y12.08698
G01 X161.04336 Y12.12120
G01 X161.06708 Y12.32737
G01 X161.07132 Y12.41390
G01 X161.07132 Y12.48276
G01 X161.06708 Y12.56928
G01 X161.04336 Y12.77547
G01 X161.03856 Y12.80969
G01 X161.02990 Y12.84314
G01 X160.97290 Y13.04271
G01 X160.94371 Y13.12429
G01 X160.91737 Y13.18784
G01 X160.88034 Y13.26615
G01 X160.86093 Y13.30110
G01 X160.77953 Y13.44758
G01 X160.76200 Y13.47738
G01 X160.74120 Y13.50496
G01 X160.61217 Y13.66752
G01 X160.55400 Y13.73171
G01 X160.50531 Y13.78040
G01 X160.44112 Y13.83857
G01 X160.27856 Y13.96760
G01 X160.25095 Y13.98840
G01 X160.22118 Y14.00593
G01 X160.15890 Y14.04052
G01 X160.03978 Y14.10674
G01 X159.96144 Y14.14377
G01 X159.89789 Y14.17011
G01 X159.81631 Y14.19930
G01 X159.61674 Y14.25629
G01 X159.58326 Y14.26498
G01 X159.54908 Y14.26976
G01 X159.34285 Y14.29348
G01 X159.25637 Y14.29775
G01 X159.22192 Y14.29858
G01 X158.22190 Y14.29858
G01 X158.18748 Y14.29775
G01 X158.10100 Y14.29348
G01 X157.89477 Y14.26976
G01 X157.86059 Y14.26498
G01 X157.82711 Y14.25629
G01 X157.62754 Y14.19930
G01 X157.54596 Y14.17011
G01 X157.48240 Y14.14377
G01 X157.40407 Y14.10674
G01 X157.22266 Y14.00593
G01 X157.19292 Y13.98843
G01 X157.16529 Y13.96760
G01 X157.16064 Y13.96389
G01 X157.00270 Y13.83857
G01 X156.93854 Y13.78040
G01 X156.88985 Y13.73171
G01 X156.83168 Y13.66752
G01 X156.70265 Y13.50496
G01 X156.68185 Y13.47735
G01 X156.66432 Y13.44758
G01 X156.56351 Y13.26618
G01 X156.52648 Y13.18784
G01 X156.50014 Y13.12429
G01 X156.47095 Y13.04271
G01 X156.41395 Y12.84314
G01 X156.40529 Y12.80969
G01 X156.40049 Y12.77547
G01 X156.37677 Y12.56928
G01 X156.37253 Y12.48276
G01 X156.37253 Y12.41390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y12.68383 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y12.68383
G01 X151.02892 Y12.71827
G01 X151.04338 Y12.88513
G01 X151.04798 Y12.91337
G01 X151.06238 Y12.98078
G01 X151.08915 Y13.08167
G01 X151.11927 Y13.16839
G01 X151.14503 Y13.23224
G01 X151.16233 Y13.26971
G01 X151.23754 Y13.40506
G01 X151.26179 Y13.44547
G01 X151.27530 Y13.46272
G01 X151.38859 Y13.60273
G01 X151.39954 Y13.61436
G01 X151.44919 Y13.66221
G01 X151.53733 Y13.73912
G01 X151.60070 Y13.78660
G01 X151.65773 Y13.82508
G01 X151.70388 Y13.85304
G01 X151.83068 Y13.91743
G01 X151.88506 Y13.94220
G01 X151.89395 Y13.94497
G01 X152.07820 Y14.00135
G01 X152.08148 Y14.00206
G01 X152.14945 Y14.01395
G01 X152.27805 Y14.02995
G01 X152.34454 Y14.03323
G01 X152.41330 Y14.03323
G01 X152.47980 Y14.02995
G01 X152.60840 Y14.01395
G01 X152.67637 Y14.00209
G01 X152.67965 Y14.00133
G01 X152.86390 Y13.94497
G01 X152.87276 Y13.94220
G01 X152.92717 Y13.91743
G01 X153.05397 Y13.85304
G01 X153.10012 Y13.82508
G01 X153.15714 Y13.78660
G01 X153.22054 Y13.73910
G01 X153.30865 Y13.66221
G01 X153.35831 Y13.61436
G01 X153.36926 Y13.60273
G01 X153.47098 Y13.47700
G01 X153.48251 Y13.46272
G01 X153.49605 Y13.44545
G01 X153.52031 Y13.40506
G01 X153.59552 Y13.26971
G01 X153.61282 Y13.23224
G01 X153.63857 Y13.16839
G01 X153.66870 Y13.08170
G01 X153.69547 Y12.98078
G01 X153.70987 Y12.91337
G01 X153.71447 Y12.88510
G01 X153.72892 Y12.71827
G01 X153.73108 Y12.68386
G01 X153.72892 Y12.64936
G01 X153.72628 Y12.61876
G01 X153.72262 Y12.57662
G01 X153.71447 Y12.48251
G01 X153.70987 Y12.45427
G01 X153.69549 Y12.38688
G01 X153.66870 Y12.28599
G01 X153.63857 Y12.19925
G01 X153.61284 Y12.13544
G01 X153.59552 Y12.09795
G01 X153.52031 Y11.96260
G01 X153.49605 Y11.92219
G01 X153.48251 Y11.90491
G01 X153.36928 Y11.76493
G01 X153.35831 Y11.75328
G01 X153.30865 Y11.70545
G01 X153.22051 Y11.62851
G01 X153.15714 Y11.58104
G01 X153.10007 Y11.54253
G01 X153.05397 Y11.51459
G01 X152.92714 Y11.45020
G01 X152.87281 Y11.42546
G01 X152.86390 Y11.42270
G01 X152.67962 Y11.36631
G01 X152.67637 Y11.36557
G01 X152.60845 Y11.35371
G01 X152.47980 Y11.33768
G01 X152.41335 Y11.33440
G01 X152.34449 Y11.33440
G01 X152.27805 Y11.33768
G01 X152.14940 Y11.35371
G01 X152.08148 Y11.36557
G01 X152.07825 Y11.36631
G01 X152.01775 Y11.38482
G01 X151.89395 Y11.42270
G01 X151.88503 Y11.42546
G01 X151.83070 Y11.45020
G01 X151.70388 Y11.51459
G01 X151.65778 Y11.54253
G01 X151.60070 Y11.58104
G01 X151.53733 Y11.62851
G01 X151.44919 Y11.70545
G01 X151.39954 Y11.75328
G01 X151.38856 Y11.76493
G01 X151.27533 Y11.90491
G01 X151.26179 Y11.92219
G01 X151.23754 Y11.96260
G01 X151.19009 Y12.04797
G01 X151.16233 Y12.09793
G01 X151.14500 Y12.13544
G01 X151.11927 Y12.19927
G01 X151.08915 Y12.28599
G01 X151.06238 Y12.38688
G01 X151.04798 Y12.45427
G01 X151.04338 Y12.48254
G01 X151.02892 Y12.64936
G01 X151.02679 Y12.68383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X151.02679 Y17.68382 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X151.02679 Y17.68382
G01 X151.02892 Y17.71829
G01 X151.04338 Y17.88512
G01 X151.04798 Y17.91339
G01 X151.06238 Y17.98077
G01 X151.08915 Y18.08166
G01 X151.11927 Y18.16838
G01 X151.14500 Y18.23221
G01 X151.16233 Y18.26972
G01 X151.23754 Y18.40505
G01 X151.26179 Y18.44546
G01 X151.27533 Y18.46274
G01 X151.38856 Y18.60272
G01 X151.39954 Y18.61437
G01 X151.44919 Y18.66220
G01 X151.53733 Y18.73914
G01 X151.60070 Y18.78661
G01 X151.65778 Y18.82512
G01 X151.70388 Y18.85306
G01 X151.83070 Y18.91745
G01 X151.88503 Y18.94219
G01 X151.89395 Y18.94496
G01 X152.07822 Y19.00134
G01 X152.08148 Y19.00208
G01 X152.14940 Y19.01394
G01 X152.27805 Y19.02997
G01 X152.34449 Y19.03325
G01 X152.41335 Y19.03325
G01 X152.47980 Y19.02997
G01 X152.60845 Y19.01394
G01 X152.67637 Y19.00208
G01 X152.67965 Y19.00134
G01 X152.86390 Y18.94496
G01 X152.87279 Y18.94219
G01 X152.92714 Y18.91745
G01 X153.05397 Y18.85303
G01 X153.10007 Y18.82512
G01 X153.15714 Y18.78661
G01 X153.22049 Y18.73914
G01 X153.23893 Y18.72306
G01 X153.30865 Y18.66220
G01 X153.35831 Y18.61437
G01 X153.36928 Y18.60272
G01 X153.43946 Y18.51598
G01 X153.48251 Y18.46274
G01 X153.49605 Y18.44546
G01 X153.52031 Y18.40505
G01 X153.59552 Y18.26972
G01 X153.61284 Y18.23221
G01 X153.63857 Y18.16838
G01 X153.65503 Y18.12101
G01 X153.66870 Y18.08166
G01 X153.68368 Y18.02525
G01 X153.69547 Y17.98077
G01 X153.70987 Y17.91339
G01 X153.71447 Y17.88509
G01 X153.72892 Y17.71829
G01 X153.73105 Y17.68390
G01 X153.73016 Y17.66602
G01 X153.72892 Y17.64938
G01 X153.71447 Y17.48255
G01 X153.70987 Y17.45428
G01 X153.69547 Y17.38687
G01 X153.66870 Y17.28598
G01 X153.63857 Y17.19926
G01 X153.61282 Y17.13541
G01 X153.59552 Y17.09794
G01 X153.52031 Y16.96259
G01 X153.49605 Y16.92218
G01 X153.48254 Y16.90493
G01 X153.36926 Y16.76492
G01 X153.35831 Y16.75329
G01 X153.30865 Y16.70544
G01 X153.22051 Y16.62853
G01 X153.15714 Y16.58105
G01 X153.10012 Y16.54257
G01 X153.05397 Y16.51461
G01 X152.92717 Y16.45022
G01 X152.87279 Y16.42545
G01 X152.86390 Y16.42268
G01 X152.67965 Y16.36630
G01 X152.67637 Y16.36559
G01 X152.60840 Y16.35370
G01 X152.47980 Y16.33770
G01 X152.41330 Y16.33442
G01 X152.34454 Y16.33442
G01 X152.27805 Y16.33770
G01 X152.14945 Y16.35370
G01 X152.08148 Y16.36559
G01 X152.07820 Y16.36632
G01 X151.89395 Y16.42268
G01 X151.88503 Y16.42545
G01 X151.83068 Y16.45022
G01 X151.70388 Y16.51461
G01 X151.65773 Y16.54257
G01 X151.60070 Y16.58105
G01 X151.53733 Y16.62853
G01 X151.44919 Y16.70544
G01 X151.39954 Y16.75329
G01 X151.38859 Y16.76492
G01 X151.27530 Y16.90493
G01 X151.26182 Y16.92218
G01 X151.23754 Y16.96259
G01 X151.21135 Y17.00973
G01 X151.16233 Y17.09794
G01 X151.14503 Y17.13541
G01 X151.11927 Y17.19926
G01 X151.08915 Y17.28598
G01 X151.06238 Y17.38687
G01 X151.04798 Y17.45428
G01 X151.04338 Y17.48253
G01 X151.02892 Y17.64938
G01 X151.02679 Y17.68382
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.16832 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.16832 Y6.23332
G01 X136.85552 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X134.66830 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X134.66830 Y6.23332
G01 X133.35553 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.16831 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.16831 Y6.23332
G01 X129.85554 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.66832 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.66832 Y6.23332
G01 X126.35554 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X124.16832 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X124.16832 Y6.23332
G01 X122.85552 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X120.66830 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X120.66830 Y6.23332
G01 X119.35553 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.16831 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.16831 Y6.23332
G01 X115.85554 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.66832 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.66832 Y6.23332
G01 X112.35555 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X110.16833 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X110.16833 Y6.23332
G01 X108.85553 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X106.82899 Y6.16223 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X106.82899 Y6.16223
G01 X106.84156 Y6.20089
G01 X106.87699 Y6.28336
G01 X106.92688 Y6.35799
G01 X106.94283 Y6.37767
G01 X106.97199 Y6.41549
G01 X107.06216 Y6.53236
G01 X107.14441 Y6.67483
G01 X107.20760 Y6.82743
G01 X107.25035 Y6.98699
G01 X107.27095 Y7.14333
G01 X107.24545 Y7.14333
G01 X107.23516 Y7.03896
G01 X107.21644 Y6.94475
G01 X107.17374 Y6.80406
G01 X107.13699 Y6.71531
G01 X107.06767 Y6.58565
G01 X107.01431 Y6.50579
G01 X106.92104 Y6.39212
G01 X106.85312 Y6.32420
G01 X106.74235 Y6.23332
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X105.28149 Y6.23332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X105.28149 Y6.23332
G01 X105.19714 Y6.16408
G01 X105.19780 Y6.16650
G01 X105.19564 Y6.17455
G01 X105.15955 Y6.25197
G01 X105.12099 Y6.31874
G01 X105.07936 Y6.37323
G01 X105.08210 Y6.37533
G01 X104.96201 Y6.53182
G01 X104.87944 Y6.67483
G01 X104.81622 Y6.82745
G01 X104.77349 Y6.98699
G01 X104.75289 Y7.14333
G01 X104.77842 Y7.14333
G01 X104.78871 Y7.03896
G01 X104.80745 Y6.94475
G01 X104.85012 Y6.80406
G01 X104.88688 Y6.71531
G01 X104.95620 Y6.58565
G01 X105.00956 Y6.50579
G01 X105.07174 Y6.43002
G01 X105.10283 Y6.39212
G01 X105.17075 Y6.32420
G01 X105.28149 Y6.23332
G01 X106.74235 Y6.23332
G01 X106.82899 Y6.16223
G01 X106.83961 Y6.12603
G01 X106.86709 Y6.03020
G01 X106.91695 Y5.89822
G01 X106.92292 Y5.88583
G01 X106.94852 Y5.82608
G01 X106.95126 Y5.81879
G01 X106.98614 Y5.74087
G01 X107.01476 Y5.68600
G01 X107.03000 Y5.65502
G01 X107.04115 Y5.62233
G01 X107.08261 Y5.49037
G01 X107.08456 Y5.48186
G01 X107.09668 Y5.41402
G01 X107.10877 Y5.31966
G01 X107.11133 Y5.26774
G01 X107.11217 Y5.23335
G01 X107.11217 Y3.73333
G01 X107.11133 Y3.69891
G01 X107.10877 Y3.64699
G01 X107.09668 Y3.55263
G01 X107.08456 Y3.48479
G01 X107.08261 Y3.47628
G01 X107.04115 Y3.34433
G01 X107.03000 Y3.31164
G01 X107.01476 Y3.28065
G01 X106.95076 Y3.15799
G01 X106.94613 Y3.15060
G01 X106.90676 Y3.09411
G01 X106.84855 Y3.01877
G01 X106.81367 Y2.98027
G01 X106.76498 Y2.93158
G01 X106.72647 Y2.89670
G01 X106.65114 Y2.83849
G01 X106.59460 Y2.79909
G01 X106.58726 Y2.79449
G01 X106.46457 Y2.73046
G01 X106.43361 Y2.71527
G01 X106.40100 Y2.70412
G01 X106.26897 Y2.66264
G01 X106.26051 Y2.66071
G01 X106.19262 Y2.64857
G01 X106.09826 Y2.63648
G01 X106.04634 Y2.63391
G01 X105.97755 Y2.63391
G01 X105.92559 Y2.63648
G01 X105.83125 Y2.64857
G01 X105.76333 Y2.66071
G01 X105.75487 Y2.66264
G01 X105.62284 Y2.70412
G01 X105.59023 Y2.71527
G01 X105.55927 Y2.73046
G01 X105.43659 Y2.79449
G01 X105.42924 Y2.79909
G01 X105.37265 Y2.83851
G01 X105.29737 Y2.89670
G01 X105.25886 Y2.93160
G01 X105.21022 Y2.98024
G01 X105.17530 Y3.01877
G01 X105.11713 Y3.09406
G01 X105.07768 Y3.15065
G01 X105.07309 Y3.15799
G01 X105.00905 Y3.28067
G01 X104.99386 Y3.31164
G01 X104.98271 Y3.34425
G01 X104.94123 Y3.47628
G01 X104.93930 Y3.48474
G01 X104.92716 Y3.55263
G01 X104.91507 Y3.64699
G01 X104.91251 Y3.69891
G01 X104.91167 Y3.73333
G01 X104.91167 Y5.23335
G01 X104.91251 Y5.26774
G01 X104.91507 Y5.31966
G01 X104.92716 Y5.41402
G01 X104.93930 Y5.48191
G01 X104.94123 Y5.49037
G01 X104.98271 Y5.62240
G01 X104.99386 Y5.65502
G01 X105.00905 Y5.68598
G01 X105.03770 Y5.74087
G01 X105.05401 Y5.77422
G01 X105.06699 Y5.80259
G01 X105.07382 Y5.81806
G01 X105.10237 Y5.88471
G01 X105.12008 Y5.92982
G01 X105.14766 Y6.00696
G01 X105.15589 Y6.03101
G01 X105.18612 Y6.12370
G01 X105.19714 Y6.16408
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X104.75289 Y8.82334 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X104.75289 Y8.82334
G01 X104.77842 Y8.82334
G01 X104.78871 Y8.92765
G01 X104.79793 Y8.97396
G01 X104.79793 Y9.07088
G01 X104.77349 Y8.97967
G01 X104.75289 Y8.82334
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X108.74991 Y9.64167 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X108.74991 Y9.64167
G01 X108.72119 Y9.58094
G01 X108.71362 Y9.56453
G01 X108.68707 Y9.50533
G01 X108.63556 Y9.40944
G01 X108.61382 Y9.37525
G01 X108.60635 Y9.36324
G01 X108.57768 Y9.31610
G01 X108.57310 Y9.30868
G01 X108.50910 Y9.18605
G01 X108.49381 Y9.15493
G01 X108.48271 Y9.12234
G01 X108.44125 Y8.99039
G01 X108.43930 Y8.98183
G01 X108.42718 Y8.91406
G01 X108.41507 Y8.81965
G01 X108.41253 Y8.76779
G01 X108.41169 Y8.73332
G01 X108.41169 Y7.23332
G01 X108.41253 Y7.19888
G01 X108.41507 Y7.14699
G01 X108.42718 Y7.05257
G01 X108.43930 Y6.98478
G01 X108.44125 Y6.97625
G01 X108.48271 Y6.84432
G01 X108.49383 Y6.81166
G01 X108.49558 Y6.80792
G01 X108.50907 Y6.78062
G01 X108.57308 Y6.65801
G01 X108.57773 Y6.65059
G01 X108.61712 Y6.59405
G01 X108.66772 Y6.52860
G01 X108.70480 Y6.47582
G01 X108.72065 Y6.45090
G01 X108.74509 Y6.41493
G01 X108.76614 Y6.38575
G01 X108.82848 Y6.28476
G01 X108.85553 Y6.23332
G01 X108.82713 Y6.18361
G01 X108.82667 Y6.18285
G01 X108.78565 Y6.11125
G01 X108.74671 Y6.04983
G01 X108.70518 Y5.99050
G01 X108.68969 Y5.96812
G01 X108.66772 Y5.93807
G01 X108.61710 Y5.87257
G01 X108.57773 Y5.81605
G01 X108.57308 Y5.80863
G01 X108.50907 Y5.68603
G01 X108.49386 Y5.65504
G01 X108.48271 Y5.62233
G01 X108.44125 Y5.49040
G01 X108.43930 Y5.48186
G01 X108.42718 Y5.41407
G01 X108.41507 Y5.31966
G01 X108.41253 Y5.26779
G01 X108.41169 Y5.23335
G01 X108.41169 Y3.73333
G01 X108.41253 Y3.69886
G01 X108.41507 Y3.64699
G01 X108.42718 Y3.55258
G01 X108.43930 Y3.48479
G01 X108.44125 Y3.47625
G01 X108.48271 Y3.34433
G01 X108.49386 Y3.31161
G01 X108.50907 Y3.28062
G01 X108.57308 Y3.15802
G01 X108.57773 Y3.15060
G01 X108.61710 Y3.09409
G01 X108.67529 Y3.01877
G01 X108.71019 Y2.98027
G01 X108.75885 Y2.93160
G01 X108.79736 Y2.89668
G01 X108.87267 Y2.83854
G01 X108.92924 Y2.79909
G01 X108.93660 Y2.79449
G01 X109.05926 Y2.73046
G01 X109.09025 Y2.71524
G01 X109.12284 Y2.70412
G01 X109.25487 Y2.66264
G01 X109.26332 Y2.66071
G01 X109.33124 Y2.64857
G01 X109.42560 Y2.63648
G01 X109.47755 Y2.63391
G01 X109.54633 Y2.63391
G01 X109.59825 Y2.63648
G01 X109.69261 Y2.64857
G01 X109.76050 Y2.66071
G01 X109.76896 Y2.66264
G01 X109.90099 Y2.70412
G01 X109.93360 Y2.71527
G01 X109.96459 Y2.73046
G01 X110.08725 Y2.79449
G01 X110.09462 Y2.79909
G01 X110.15118 Y2.83854
G01 X110.22649 Y2.89668
G01 X110.26500 Y2.93160
G01 X110.31366 Y2.98027
G01 X110.34856 Y3.01877
G01 X110.40676 Y3.09409
G01 X110.44613 Y3.15060
G01 X110.45077 Y3.15799
G01 X110.51478 Y3.28065
G01 X110.52997 Y3.31161
G01 X110.54115 Y3.34433
G01 X110.58260 Y3.47628
G01 X110.58456 Y3.48479
G01 X110.59667 Y3.55263
G01 X110.60876 Y3.64699
G01 X110.61133 Y3.69891
G01 X110.61217 Y3.73333
G01 X110.61217 Y5.23335
G01 X110.61133 Y5.26774
G01 X110.60876 Y5.31966
G01 X110.59667 Y5.41402
G01 X110.58456 Y5.48186
G01 X110.58260 Y5.49037
G01 X110.54115 Y5.62233
G01 X110.52997 Y5.65504
G01 X110.51478 Y5.68600
G01 X110.45077 Y5.80866
G01 X110.44613 Y5.81605
G01 X110.40676 Y5.87257
G01 X110.35613 Y5.93807
G01 X110.31907 Y5.99083
G01 X110.30320 Y6.01572
G01 X110.27874 Y6.05179
G01 X110.25776 Y6.08087
G01 X110.19535 Y6.18194
G01 X110.16833 Y6.23332
G01 X110.19677 Y6.28308
G01 X110.19715 Y6.28379
G01 X110.23820 Y6.35539
G01 X110.27716 Y6.41689
G01 X110.31646 Y6.47300
G01 X110.31867 Y6.47615
G01 X110.33424 Y6.49865
G01 X110.35611 Y6.52857
G01 X110.40673 Y6.59405
G01 X110.44613 Y6.65059
G01 X110.45077 Y6.65799
G01 X110.51478 Y6.78064
G01 X110.52997 Y6.81160
G01 X110.54115 Y6.84432
G01 X110.58260 Y6.97627
G01 X110.58456 Y6.98478
G01 X110.59667 Y7.05265
G01 X110.60876 Y7.14699
G01 X110.61133 Y7.19895
G01 X110.61217 Y7.23332
G01 X110.61217 Y8.73332
G01 X110.61133 Y8.76773
G01 X110.60876 Y8.81965
G01 X110.59667 Y8.91401
G01 X110.58456 Y8.98183
G01 X110.58130 Y8.99595
G01 X110.56647 Y9.06202
G01 X110.55517 Y9.12659
G01 X110.55298 Y9.13857
G01 X110.54115 Y9.20017
G01 X110.52578 Y9.35884
G01 X110.52111 Y9.44779
G01 X110.52080 Y9.45115
G01 X110.52078 Y9.45115
G01 X110.51432 Y9.46085
G01 X110.49340 Y9.48633
G01 X110.37935 Y9.54028
G01 X110.29726 Y9.57436
G01 X110.15024 Y9.62697
G01 X110.08379 Y9.64718
G01 X109.93675 Y9.68401
G01 X109.88052 Y9.69524
G01 X109.73348 Y9.71703
G01 X109.68314 Y9.72201
G01 X109.53615 Y9.72923
G01 X109.48773 Y9.72923
G01 X109.34069 Y9.72201
G01 X109.29035 Y9.71703
G01 X109.14331 Y9.69524
G01 X109.13993 Y9.69473
G01 X109.11174 Y9.69036
G01 X109.08613 Y9.68584
G01 X109.04145 Y9.67695
G01 X108.97585 Y9.66728
G01 X108.93165 Y9.66293
G01 X108.90175 Y9.65938
G01 X108.85258 Y9.65259
G01 X108.81641 Y9.64833
G01 X108.74991 Y9.64167
G01 X108.74207 Y9.65470
G01 X108.69513 Y9.73037
G01 X108.65482 Y9.78940
G01 X108.63257 Y9.81899
G01 X108.62804 Y9.82496
G01 X108.58067 Y9.88668
G01 X108.51979 Y9.95615
G01 X107.13816 Y11.33778
G01 X106.99442 Y11.68485
G01 X106.98675 Y11.70471
G01 X106.96219 Y11.77332
G01 X106.95210 Y11.80651
G01 X106.93491 Y11.87512
G01 X106.92927 Y11.90336
G01 X106.91911 Y11.97197
G01 X106.91659 Y11.99742
G01 X106.91321 Y12.06603
G01 X106.91291 Y12.07835
G01 X106.91291 Y30.76281
G01 X106.91321 Y30.77511
G01 X106.91659 Y30.84374
G01 X106.91911 Y30.86921
G01 X106.92927 Y30.93782
G01 X106.93491 Y30.96606
G01 X106.94740 Y31.01600
G01 X106.95865 Y31.03116
G01 X106.97806 Y31.05484
G01 X107.02421 Y31.10574
G01 X107.03437 Y31.11638
G01 X109.17928 Y33.26131
G01 X109.25812 Y33.31978
G01 X109.27854 Y33.33655
G01 X109.39490 Y33.44198
G01 X109.41224 Y33.45933
G01 X109.42083 Y33.46880
G01 X109.43023 Y33.47734
G01 X109.43914 Y33.48582
G01 X110.38654 Y34.43319
G01 X110.39543 Y34.44165
G01 X110.44633 Y34.48780
G01 X110.46612 Y34.50403
G01 X110.52182 Y34.54536
G01 X110.54580 Y34.56136
G01 X110.60645 Y34.59771
G01 X110.63703 Y34.61401
G01 X110.70292 Y34.64518
G01 X110.72243 Y34.65381
G01 X111.06947 Y34.79758
G01 X111.92809 Y34.79758
G01 X111.97401 Y34.79908
G01 X112.01292 Y34.80164
G01 X112.12631 Y34.81818
G01 X112.14983 Y34.83550
G01 X112.21155 Y34.88287
G01 X112.28110 Y34.94381
G01 X112.40045 Y35.06316
G01 X112.43190 Y35.09674
G01 X112.45758 Y35.12605
G01 X112.52606 Y35.21792
G01 X112.53045 Y35.24683
G01 X112.54058 Y35.32394
G01 X112.54668 Y35.41617
G01 X112.54668 Y35.92206
G01 X112.54516 Y35.96799
G01 X112.54262 Y36.00690
G01 X112.52245 Y36.13555
G01 X112.51328 Y36.14655
G01 X112.46258 Y36.20631
G01 X112.45549 Y36.21454
G01 X112.40975 Y36.26684
G01 X112.40149 Y36.27614
G01 X112.37228 Y36.30835
G01 X112.31051 Y36.38828
G01 X112.27112 Y36.44484
G01 X112.26545 Y36.45389
G01 X112.19781 Y36.58348
G01 X112.18260 Y36.61447
G01 X112.17145 Y36.64710
G01 X112.16756 Y36.65947
G01 X112.14622 Y36.80337
G01 X112.13987 Y36.86753
G01 X112.13218 Y37.02432
G01 X112.13142 Y37.05531
G01 X112.13142 Y37.85533
G01 X112.13218 Y37.88629
G01 X112.13987 Y38.04314
G01 X112.14622 Y38.10733
G01 X112.16756 Y38.25119
G01 X112.17145 Y38.26356
G01 X112.18257 Y38.29615
G01 X112.19779 Y38.32714
G01 X112.24282 Y38.41345
G01 X112.26545 Y38.45675
G01 X112.27109 Y38.46580
G01 X112.31054 Y38.52241
G01 X112.37231 Y38.60235
G01 X112.40985 Y38.64377
G01 X112.45849 Y38.69241
G01 X112.49992 Y38.72996
G01 X112.57988 Y38.79173
G01 X112.63642 Y38.83112
G01 X112.64549 Y38.83679
G01 X112.77505 Y38.90443
G01 X112.80604 Y38.91964
G01 X112.83875 Y38.93082
G01 X112.90594 Y38.95190
G01 X112.97820 Y38.97461
G01 X112.98864 Y38.97700
G01 X113.05648 Y38.98911
G01 X113.15669 Y39.00199
G01 X113.21252 Y39.00473
G01 X113.28132 Y39.00473
G01 X113.33715 Y39.00199
G01 X113.43738 Y38.98911
G01 X113.50523 Y38.97700
G01 X113.51566 Y38.97461
G01 X113.65509 Y38.93082
G01 X113.68780 Y38.91964
G01 X113.71879 Y38.90443
G01 X113.84835 Y38.83679
G01 X113.85783 Y38.83087
G01 X113.87322 Y38.82122
G01 X113.88635 Y38.81276
G01 X113.91549 Y38.79358
G01 X113.98338 Y38.75398
G01 X114.05549 Y38.71695
G01 X114.12806 Y38.67994
G01 X114.27784 Y38.61875
G01 X114.28648 Y38.61599
G01 X114.29090 Y38.61063
G01 X114.34426 Y38.53074
G01 X114.41818 Y38.39244
G01 X114.45493 Y38.30369
G01 X114.50047 Y38.15363
G01 X114.51691 Y38.07072
G01 X114.51691 Y36.83971
G01 X114.50047 Y36.75701
G01 X114.45493 Y36.60692
G01 X114.41818 Y36.51817
G01 X114.34426 Y36.37987
G01 X114.29090 Y36.30001
G01 X114.27192 Y36.27690
G01 X114.19141 Y36.17878
G01 X114.12349 Y36.11086
G01 X114.08691 Y36.08086
G01 X114.08691 Y34.91932
G01 X114.08455 Y34.87131
G01 X114.07784 Y34.80301
G01 X114.05910 Y34.70881
G01 X114.03918 Y34.64317
G01 X114.00243 Y34.55442
G01 X113.97007 Y34.49390
G01 X113.91671 Y34.41404
G01 X113.87320 Y34.36100
G01 X113.84089 Y34.32537
G01 X113.50281 Y33.98732
G01 X112.81841 Y33.70383
G01 X112.79855 Y33.69616
G01 X112.72994 Y33.67160
G01 X112.69674 Y33.66151
G01 X112.62814 Y33.64434
G01 X112.59989 Y33.63870
G01 X112.53126 Y33.62852
G01 X112.50584 Y33.62600
G01 X112.43721 Y33.62263
G01 X112.42494 Y33.62232
G01 X111.11592 Y33.62232
G01 X111.10363 Y33.62204
G01 X111.03500 Y33.61866
G01 X111.00955 Y33.61615
G01 X110.94092 Y33.60596
G01 X110.92692 Y33.60355
G01 X110.91531 Y33.59537
G01 X110.85961 Y33.55405
G01 X110.83983 Y33.53781
G01 X110.78892 Y33.49166
G01 X110.78003 Y33.48320
G01 X108.00204 Y30.70521
G01 X107.99358 Y30.69632
G01 X107.94743 Y30.64541
G01 X107.93120 Y30.62563
G01 X107.88987 Y30.56993
G01 X107.88169 Y30.55832
G01 X107.87928 Y30.54432
G01 X107.86909 Y30.47569
G01 X107.86658 Y30.45024
G01 X107.86320 Y30.38161
G01 X107.86292 Y30.36934
G01 X107.86292 Y12.47184
G01 X107.86320 Y12.45955
G01 X107.86658 Y12.39092
G01 X107.86909 Y12.36549
G01 X107.87928 Y12.29686
G01 X107.88169 Y12.28287
G01 X107.88987 Y12.27126
G01 X107.93120 Y12.21556
G01 X107.94743 Y12.19574
G01 X107.99358 Y12.14487
G01 X108.00204 Y12.13598
G01 X109.19754 Y10.94048
G01 X109.20640 Y10.93199
G01 X109.25730 Y10.88587
G01 X109.27712 Y10.86961
G01 X109.33282 Y10.82831
G01 X109.34445 Y10.82013
G01 X109.35842 Y10.81769
G01 X109.42703 Y10.80753
G01 X109.45250 Y10.80502
G01 X109.52113 Y10.80164
G01 X109.53343 Y10.80133
G01 X112.39842 Y10.80133
G01 X112.41074 Y10.80103
G01 X112.47934 Y10.79765
G01 X112.50480 Y10.79514
G01 X112.57340 Y10.78498
G01 X112.60165 Y10.77934
G01 X112.67025 Y10.76214
G01 X112.70345 Y10.75206
G01 X112.77205 Y10.72750
G01 X112.79192 Y10.71983
G01 X113.47635 Y10.43634
G01 X113.64498 Y10.43634
G01 X113.78376 Y10.50324
G01 X113.86088 Y10.52940
G01 X114.03230 Y10.56694
G01 X114.09044 Y10.57268
G01 X114.15950 Y10.57609
G01 X114.82509 Y10.57609
G01 X114.91731 Y10.57002
G01 X114.99443 Y10.55986
G01 X115.02333 Y10.55549
G01 X115.11536 Y10.48688
G01 X115.14467 Y10.46115
G01 X115.17809 Y10.42986
G01 X115.57535 Y10.03260
G01 X115.63629 Y9.96306
G01 X115.68366 Y9.90134
G01 X115.76199 Y9.77573
G01 X115.76407 Y9.71813
G01 X115.76407 Y9.64101
G01 X115.76303 Y9.60030
G01 X115.73928 Y9.55894
G01 X115.69994 Y9.49476
G01 X115.69377 Y9.48490
G01 X115.66443 Y9.43873
G01 X115.62712 Y9.38551
G01 X115.61711 Y9.37253
G01 X115.57771 Y9.31602
G01 X115.57309 Y9.30865
G01 X115.50908 Y9.18602
G01 X115.49387 Y9.15501
G01 X115.48272 Y9.12239
G01 X115.44124 Y8.99037
G01 X115.43931 Y8.98191
G01 X115.42717 Y8.91401
G01 X115.41508 Y8.81965
G01 X115.41251 Y8.76773
G01 X115.41167 Y8.73332
G01 X115.41167 Y7.23332
G01 X115.41251 Y7.19895
G01 X115.41508 Y7.14699
G01 X115.42717 Y7.05265
G01 X115.43931 Y6.98473
G01 X115.44124 Y6.97627
G01 X115.48272 Y6.84424
G01 X115.49384 Y6.81166
G01 X115.49559 Y6.80792
G01 X115.50906 Y6.78067
G01 X115.57309 Y6.65799
G01 X115.57769 Y6.65064
G01 X115.61713 Y6.59405
G01 X115.66773 Y6.52857
G01 X115.70479 Y6.47582
G01 X115.72064 Y6.45090
G01 X115.74510 Y6.41488
G01 X115.76613 Y6.38575
G01 X115.82849 Y6.28471
G01 X115.85554 Y6.23332
G01 X115.82714 Y6.18367
G01 X115.78564 Y6.11125
G01 X115.74672 Y6.04988
G01 X115.70517 Y5.99050
G01 X115.68968 Y5.96812
G01 X115.66773 Y5.93812
G01 X115.61708 Y5.87254
G01 X115.57769 Y5.81600
G01 X115.57309 Y5.80866
G01 X115.50906 Y5.68598
G01 X115.49387 Y5.65502
G01 X115.48272 Y5.62240
G01 X115.44124 Y5.49037
G01 X115.43931 Y5.48191
G01 X115.42717 Y5.41402
G01 X115.41508 Y5.31966
G01 X115.41251 Y5.26774
G01 X115.41167 Y5.23335
G01 X115.41167 Y3.73333
G01 X115.41251 Y3.69891
G01 X115.41508 Y3.64699
G01 X115.42717 Y3.55263
G01 X115.43931 Y3.48474
G01 X115.44124 Y3.47628
G01 X115.48272 Y3.34425
G01 X115.49387 Y3.31164
G01 X115.50906 Y3.28067
G01 X115.57309 Y3.15799
G01 X115.57769 Y3.15065
G01 X115.61708 Y3.09411
G01 X115.67530 Y3.01877
G01 X115.71017 Y2.98027
G01 X115.75887 Y2.93158
G01 X115.79737 Y2.89670
G01 X115.87271 Y2.83849
G01 X115.92925 Y2.79909
G01 X115.93659 Y2.79449
G01 X116.05927 Y2.73046
G01 X116.09023 Y2.71527
G01 X116.12285 Y2.70412
G01 X116.25488 Y2.66264
G01 X116.26334 Y2.66071
G01 X116.33123 Y2.64857
G01 X116.42559 Y2.63648
G01 X116.47751 Y2.63391
G01 X116.54629 Y2.63391
G01 X116.59826 Y2.63648
G01 X116.69260 Y2.64857
G01 X116.76051 Y2.66071
G01 X116.76897 Y2.66264
G01 X116.90100 Y2.70412
G01 X116.93362 Y2.71527
G01 X116.96458 Y2.73046
G01 X117.08726 Y2.79449
G01 X117.09460 Y2.79909
G01 X117.15114 Y2.83849
G01 X117.22648 Y2.89670
G01 X117.26498 Y2.93158
G01 X117.31368 Y2.98027
G01 X117.34855 Y3.01877
G01 X117.40677 Y3.09411
G01 X117.44616 Y3.15065
G01 X117.45076 Y3.15799
G01 X117.51479 Y3.28067
G01 X117.52998 Y3.31164
G01 X117.54113 Y3.34425
G01 X117.58261 Y3.47628
G01 X117.58454 Y3.48474
G01 X117.59668 Y3.55263
G01 X117.60877 Y3.64699
G01 X117.61134 Y3.69891
G01 X117.61218 Y3.73333
G01 X117.61218 Y5.23335
G01 X117.61134 Y5.26774
G01 X117.60877 Y5.31966
G01 X117.59668 Y5.41402
G01 X117.58454 Y5.48191
G01 X117.58261 Y5.49037
G01 X117.54113 Y5.62240
G01 X117.52998 Y5.65502
G01 X117.51479 Y5.68598
G01 X117.45076 Y5.80866
G01 X117.44616 Y5.81600
G01 X117.40677 Y5.87254
G01 X117.35612 Y5.93812
G01 X117.31909 Y5.99083
G01 X117.30321 Y6.01572
G01 X117.27873 Y6.05181
G01 X117.25777 Y6.08087
G01 X117.19534 Y6.18199
G01 X117.16831 Y6.23332
G01 X117.19673 Y6.28303
G01 X117.19717 Y6.28379
G01 X117.23819 Y6.35539
G01 X117.27715 Y6.41684
G01 X117.31647 Y6.47300
G01 X117.31868 Y6.47615
G01 X117.33425 Y6.49865
G01 X117.35612 Y6.52852
G01 X117.40674 Y6.59405
G01 X117.44616 Y6.65064
G01 X117.45076 Y6.65799
G01 X117.51479 Y6.78067
G01 X117.52998 Y6.81163
G01 X117.54113 Y6.84424
G01 X117.58261 Y6.97627
G01 X117.58454 Y6.98473
G01 X117.59668 Y7.05265
G01 X117.60877 Y7.14699
G01 X117.61134 Y7.19895
G01 X117.61218 Y7.23332
G01 X117.61218 Y8.73332
G01 X117.61134 Y8.76773
G01 X117.60877 Y8.81965
G01 X117.59668 Y8.91401
G01 X117.58454 Y8.98191
G01 X117.58261 Y8.99037
G01 X117.54113 Y9.12239
G01 X117.52998 Y9.15501
G01 X117.51477 Y9.18602
G01 X117.45076 Y9.30865
G01 X117.44614 Y9.31602
G01 X117.40677 Y9.37253
G01 X117.34779 Y9.44886
G01 X117.31581 Y9.48813
G01 X117.29745 Y9.51236
G01 X117.27220 Y9.54386
G01 X117.24771 Y9.57271
G01 X117.23499 Y9.58813
G01 X117.21622 Y9.71101
G01 X117.21368 Y9.74990
G01 X117.21218 Y9.79588
G01 X117.21218 Y10.08632
G01 X117.21131 Y10.12077
G01 X117.20964 Y10.15503
G01 X117.20458 Y10.18907
G01 X117.19117 Y10.25653
G01 X117.18282 Y10.28983
G01 X117.17123 Y10.32219
G01 X117.14492 Y10.38579
G01 X117.13024 Y10.41683
G01 X117.11258 Y10.44629
G01 X117.07431 Y10.50357
G01 X117.05388 Y10.53108
G01 X117.03077 Y10.55661
G01 X117.00705 Y10.58150
G01 X116.91477 Y10.67378
G01 X116.85381 Y10.74335
G01 X116.80644 Y10.80507
G01 X116.70182 Y10.98825
G01 X116.66986 Y11.06537
G01 X116.64931 Y11.13687
G01 X116.64329 Y11.15790
G01 X116.66339 Y11.23293
G01 X116.69948 Y11.31033
G01 X116.73804 Y11.37713
G01 X116.74329 Y11.38467
G01 X116.74718 Y11.38632
G01 X116.96305 Y11.47756
G01 X117.04019 Y11.49821
G01 X117.18292 Y11.52201
G01 X117.22183 Y11.52457
G01 X117.26775 Y11.52607
G01 X118.44707 Y11.52607
G01 X118.53933 Y11.52000
G01 X118.61644 Y11.50984
G01 X118.64535 Y11.50547
G01 X118.73722 Y11.43697
G01 X118.76653 Y11.41129
G01 X118.80011 Y11.37985
G01 X119.16546 Y11.01449
G01 X119.22630 Y10.94507
G01 X119.27367 Y10.88338
G01 X119.29107 Y10.85975
G01 X119.30763 Y10.74606
G01 X119.31017 Y10.70715
G01 X119.31167 Y10.66146
G01 X119.31167 Y9.79588
G01 X119.30562 Y9.70375
G01 X119.29546 Y9.62661
G01 X119.28934 Y9.58788
G01 X119.25332 Y9.54180
G01 X119.22256 Y9.50553
G01 X119.20824 Y9.48805
G01 X119.19808 Y9.47525
G01 X119.17605 Y9.44886
G01 X119.11713 Y9.37258
G01 X119.07771 Y9.31602
G01 X119.07308 Y9.30865
G01 X119.00908 Y9.18602
G01 X118.99386 Y9.15503
G01 X118.98271 Y9.12234
G01 X118.94126 Y8.99037
G01 X118.93930 Y8.98183
G01 X118.92719 Y8.91406
G01 X118.91507 Y8.81963
G01 X118.91250 Y8.76779
G01 X118.91167 Y8.73332
G01 X118.91167 Y7.23332
G01 X118.91250 Y7.19888
G01 X118.91507 Y7.14701
G01 X118.92719 Y7.05257
G01 X118.93930 Y6.98478
G01 X118.94126 Y6.97627
G01 X118.98271 Y6.84432
G01 X118.99384 Y6.81166
G01 X118.99559 Y6.80792
G01 X119.00905 Y6.78067
G01 X119.07308 Y6.65799
G01 X119.07768 Y6.65064
G01 X119.11715 Y6.59403
G01 X119.16772 Y6.52857
G01 X119.20481 Y6.47577
G01 X119.22058 Y6.45100
G01 X119.24509 Y6.41491
G01 X119.26607 Y6.38585
G01 X119.32848 Y6.28476
G01 X119.35553 Y6.23332
G01 X119.32713 Y6.18361
G01 X119.32668 Y6.18285
G01 X119.28566 Y6.11125
G01 X119.24672 Y6.04983
G01 X119.20735 Y5.99360
G01 X119.20521 Y5.99052
G01 X119.18954 Y5.96789
G01 X119.16772 Y5.93812
G01 X119.11713 Y5.87259
G01 X119.07768 Y5.81600
G01 X119.07308 Y5.80866
G01 X119.00905 Y5.68598
G01 X118.99386 Y5.65504
G01 X118.98271 Y5.62233
G01 X118.94126 Y5.49037
G01 X118.93930 Y5.48186
G01 X118.92719 Y5.41407
G01 X118.91507 Y5.31963
G01 X118.91250 Y5.26779
G01 X118.91167 Y5.23335
G01 X118.91167 Y3.73333
G01 X118.91250 Y3.69886
G01 X118.91507 Y3.64702
G01 X118.92719 Y3.55258
G01 X118.93930 Y3.48479
G01 X118.94126 Y3.47628
G01 X118.98271 Y3.34433
G01 X118.99386 Y3.31161
G01 X119.00905 Y3.28067
G01 X119.07308 Y3.15802
G01 X119.07768 Y3.15065
G01 X119.11713 Y3.09406
G01 X119.17529 Y3.01877
G01 X119.21022 Y2.98024
G01 X119.25886 Y2.93160
G01 X119.29737 Y2.89668
G01 X119.37268 Y2.83854
G01 X119.42924 Y2.79909
G01 X119.43661 Y2.79449
G01 X119.55926 Y2.73046
G01 X119.59025 Y2.71524
G01 X119.62284 Y2.70412
G01 X119.75487 Y2.66264
G01 X119.76333 Y2.66071
G01 X119.83125 Y2.64857
G01 X119.92558 Y2.63648
G01 X119.97755 Y2.63391
G01 X120.04634 Y2.63391
G01 X120.09825 Y2.63648
G01 X120.19261 Y2.64857
G01 X120.26051 Y2.66071
G01 X120.26897 Y2.66264
G01 X120.40100 Y2.70412
G01 X120.43361 Y2.71527
G01 X120.46457 Y2.73046
G01 X120.58725 Y2.79449
G01 X120.59459 Y2.79909
G01 X120.65113 Y2.83849
G01 X120.72647 Y2.89670
G01 X120.76498 Y2.93158
G01 X120.81367 Y2.98027
G01 X120.84854 Y3.01877
G01 X120.90676 Y3.09411
G01 X120.94613 Y3.15060
G01 X120.95075 Y3.15799
G01 X121.01476 Y3.28065
G01 X121.03000 Y3.31164
G01 X121.04115 Y3.34433
G01 X121.08260 Y3.47628
G01 X121.08456 Y3.48479
G01 X121.09668 Y3.55263
G01 X121.10877 Y3.64699
G01 X121.11133 Y3.69891
G01 X121.11217 Y3.73333
G01 X121.11217 Y5.23335
G01 X121.11133 Y5.26774
G01 X121.10877 Y5.31966
G01 X121.09668 Y5.41402
G01 X121.08456 Y5.48186
G01 X121.08260 Y5.49037
G01 X121.04115 Y5.62233
G01 X121.03000 Y5.65502
G01 X121.01476 Y5.68600
G01 X120.95075 Y5.80866
G01 X120.94613 Y5.81605
G01 X120.90676 Y5.87254
G01 X120.85611 Y5.93812
G01 X120.81908 Y5.99083
G01 X120.80320 Y6.01572
G01 X120.77872 Y6.05181
G01 X120.75776 Y6.08087
G01 X120.69533 Y6.18199
G01 X120.66830 Y6.23332
G01 X120.69673 Y6.28303
G01 X120.69716 Y6.28379
G01 X120.73818 Y6.35539
G01 X120.77714 Y6.41684
G01 X120.81646 Y6.47300
G01 X120.81867 Y6.47615
G01 X120.83424 Y6.49865
G01 X120.85611 Y6.52852
G01 X120.90673 Y6.59405
G01 X120.94613 Y6.65059
G01 X120.95075 Y6.65799
G01 X121.01476 Y6.78064
G01 X121.03000 Y6.81163
G01 X121.04115 Y6.84432
G01 X121.08260 Y6.97627
G01 X121.08456 Y6.98478
G01 X121.09668 Y7.05265
G01 X121.10877 Y7.14699
G01 X121.11133 Y7.19895
G01 X121.11217 Y7.23332
G01 X121.11217 Y8.73332
G01 X121.11133 Y8.76773
G01 X121.10877 Y8.81965
G01 X121.09668 Y8.91401
G01 X121.08456 Y8.98183
G01 X121.08260 Y8.99037
G01 X121.04115 Y9.12234
G01 X121.03000 Y9.15501
G01 X121.01476 Y9.18605
G01 X120.95075 Y9.30865
G01 X120.94610 Y9.31604
G01 X120.90676 Y9.37253
G01 X120.84778 Y9.44886
G01 X120.81580 Y9.48813
G01 X120.79744 Y9.51236
G01 X120.77219 Y9.54386
G01 X120.74771 Y9.57271
G01 X120.73501 Y9.58810
G01 X120.71623 Y9.71101
G01 X120.71367 Y9.74993
G01 X120.71217 Y9.79588
G01 X120.71217 Y11.15831
G01 X120.71133 Y11.19275
G01 X120.70963 Y11.22706
G01 X120.70460 Y11.26105
G01 X120.70112 Y11.28226
G01 X120.69119 Y11.32851
G01 X120.68283 Y11.36184
G01 X120.67125 Y11.39417
G01 X120.64494 Y11.45777
G01 X120.63026 Y11.48881
G01 X120.61260 Y11.51828
G01 X120.57433 Y11.57555
G01 X120.55388 Y11.60311
G01 X120.53589 Y11.62295
G01 X120.53081 Y11.62861
G01 X120.50795 Y11.65437
G01 X120.47585 Y11.69331
G01 X120.42850 Y11.75500
G01 X120.32383 Y11.93824
G01 X120.29188 Y12.01540
G01 X120.26671 Y12.11317
G01 X120.28540 Y12.18294
G01 X120.32149 Y12.26034
G01 X120.36005 Y12.32714
G01 X120.40905 Y12.39714
G01 X120.42416 Y12.41225
G01 X120.42873 Y12.41322
G01 X120.57554 Y12.44411
G01 X120.58040 Y12.44466
G01 X120.65715 Y12.45696
G01 X120.66325 Y12.45823
G01 X120.80465 Y12.47423
G01 X120.83229 Y12.47466
G01 X120.84379 Y12.47497
G01 X120.88979 Y12.47646
G01 X120.90132 Y12.47692
G01 X120.96109 Y12.47987
G01 X121.06714 Y12.49348
G01 X121.13498 Y12.50560
G01 X121.14732 Y12.50842
G01 X121.29426 Y12.55457
G01 X121.32695 Y12.56572
G01 X121.35794 Y12.58096
G01 X121.49449 Y12.65221
G01 X121.50518 Y12.65891
G01 X121.56178 Y12.69833
G01 X121.64638 Y12.76371
G01 X121.69071 Y12.80390
G01 X121.73935 Y12.85254
G01 X121.76216 Y12.87768
G01 X121.82975 Y12.94304
G01 X121.86023 Y12.96889
G01 X121.88903 Y12.99462
G01 X121.91682 Y13.02071
G01 X122.06254 Y13.13178
G01 X122.07836 Y13.14164
G01 X122.09883 Y13.15495
G01 X122.10168 Y13.15680
G01 X122.13216 Y13.15680
G01 X122.15547 Y13.14161
G01 X122.17135 Y13.13173
G01 X122.31710 Y13.02069
G01 X122.34483 Y12.99462
G01 X122.37361 Y12.96892
G01 X122.40412 Y12.94304
G01 X122.47173 Y12.87766
G01 X122.49446 Y12.85256
G01 X122.54313 Y12.80390
G01 X122.58745 Y12.76371
G01 X122.67209 Y12.69833
G01 X122.72868 Y12.65891
G01 X122.73934 Y12.65221
G01 X122.87592 Y12.58093
G01 X122.90691 Y12.56572
G01 X122.93960 Y12.55457
G01 X122.95611 Y12.54939
G01 X123.04282 Y12.51573
G01 X123.09464 Y12.49165
G01 X123.11361 Y12.48314
G01 X123.16358 Y12.46161
G01 X123.31432 Y12.37786
G01 X123.32220 Y12.37248
G01 X123.37833 Y12.33715
G01 X123.38367 Y12.32666
G01 X123.41570 Y12.24743
G01 X123.42575 Y12.20014
G01 X123.42050 Y12.18383
G01 X123.38730 Y12.08104
G01 X123.35369 Y12.00555
G01 X123.25291 Y11.83720
G01 X123.20955 Y11.78218
G01 X123.15441 Y11.72010
G01 X123.01676 Y11.58249
G01 X122.99307 Y11.55757
G01 X122.96998 Y11.53209
G01 X122.94953 Y11.50453
G01 X122.91125 Y11.44726
G01 X122.89360 Y11.41782
G01 X122.87892 Y11.38675
G01 X122.85258 Y11.32318
G01 X122.84102 Y11.29084
G01 X122.83266 Y11.25752
G01 X122.81925 Y11.19006
G01 X122.81420 Y11.15605
G01 X122.81252 Y11.12176
G01 X122.81168 Y11.08731
G01 X122.81168 Y9.79588
G01 X122.80559 Y9.70362
G01 X122.79545 Y9.62651
G01 X122.78933 Y9.58788
G01 X122.75331 Y9.54180
G01 X122.72268 Y9.50566
G01 X122.70820 Y9.48800
G01 X122.69820 Y9.47540
G01 X122.67605 Y9.44886
G01 X122.61709 Y9.37256
G01 X122.57772 Y9.31607
G01 X122.57308 Y9.30865
G01 X122.50909 Y9.18605
G01 X122.49385 Y9.15503
G01 X122.48270 Y9.12234
G01 X122.44125 Y8.99037
G01 X122.43929 Y8.98183
G01 X122.42718 Y8.91406
G01 X122.41506 Y8.81965
G01 X122.41252 Y8.76779
G01 X122.41168 Y8.73332
G01 X122.41168 Y7.23332
G01 X122.41252 Y7.19888
G01 X122.41506 Y7.14699
G01 X122.42718 Y7.05257
G01 X122.43929 Y6.98478
G01 X122.44125 Y6.97627
G01 X122.48270 Y6.84432
G01 X122.49385 Y6.81166
G01 X122.49558 Y6.80790
G01 X122.50909 Y6.78064
G01 X122.57308 Y6.65801
G01 X122.57772 Y6.65059
G01 X122.61712 Y6.59405
G01 X122.66772 Y6.52860
G01 X122.70480 Y6.47582
G01 X122.72065 Y6.45090
G01 X122.74509 Y6.41493
G01 X122.76614 Y6.38575
G01 X122.82847 Y6.28476
G01 X122.85552 Y6.23332
G01 X122.82713 Y6.18361
G01 X122.82667 Y6.18285
G01 X122.78565 Y6.11125
G01 X122.74671 Y6.04983
G01 X122.70518 Y5.99050
G01 X122.68969 Y5.96812
G01 X122.66772 Y5.93807
G01 X122.61709 Y5.87257
G01 X122.57772 Y5.81605
G01 X122.57308 Y5.80866
G01 X122.50907 Y5.68600
G01 X122.49388 Y5.65504
G01 X122.48270 Y5.62233
G01 X122.44125 Y5.49037
G01 X122.43929 Y5.48186
G01 X122.42718 Y5.41407
G01 X122.41506 Y5.31966
G01 X122.41252 Y5.26779
G01 X122.41168 Y5.23335
G01 X122.41168 Y3.73333
G01 X122.41252 Y3.69886
G01 X122.41506 Y3.64699
G01 X122.42718 Y3.55258
G01 X122.43929 Y3.48479
G01 X122.44125 Y3.47628
G01 X122.48270 Y3.34433
G01 X122.49388 Y3.31161
G01 X122.50907 Y3.28065
G01 X122.57308 Y3.15799
G01 X122.57772 Y3.15060
G01 X122.61709 Y3.09409
G01 X122.67529 Y3.01877
G01 X122.71019 Y2.98027
G01 X122.75885 Y2.93160
G01 X122.79736 Y2.89668
G01 X122.87267 Y2.83854
G01 X122.92924 Y2.79909
G01 X122.93660 Y2.79449
G01 X123.05926 Y2.73046
G01 X123.09025 Y2.71527
G01 X123.12283 Y2.70412
G01 X123.25489 Y2.66264
G01 X123.26332 Y2.66071
G01 X123.33124 Y2.64857
G01 X123.42560 Y2.63648
G01 X123.47754 Y2.63391
G01 X123.54630 Y2.63391
G01 X123.59825 Y2.63648
G01 X123.69261 Y2.64857
G01 X123.76053 Y2.66071
G01 X123.76896 Y2.66264
G01 X123.90101 Y2.70412
G01 X123.93360 Y2.71527
G01 X123.96459 Y2.73046
G01 X124.08725 Y2.79449
G01 X124.09461 Y2.79909
G01 X124.15118 Y2.83854
G01 X124.22649 Y2.89668
G01 X124.26500 Y2.93160
G01 X124.31366 Y2.98027
G01 X124.34856 Y3.01877
G01 X124.40675 Y3.09409
G01 X124.44612 Y3.15060
G01 X124.45077 Y3.15802
G01 X124.51478 Y3.28062
G01 X124.52999 Y3.31161
G01 X124.54114 Y3.34433
G01 X124.58260 Y3.47625
G01 X124.58455 Y3.48479
G01 X124.59667 Y3.55258
G01 X124.60878 Y3.64699
G01 X124.61132 Y3.69886
G01 X124.61219 Y3.73333
G01 X124.61219 Y5.23335
G01 X124.61132 Y5.26779
G01 X124.60878 Y5.31966
G01 X124.59667 Y5.41407
G01 X124.58455 Y5.48186
G01 X124.58260 Y5.49040
G01 X124.54114 Y5.62233
G01 X124.52999 Y5.65504
G01 X124.51478 Y5.68603
G01 X124.45077 Y5.80863
G01 X124.44612 Y5.81605
G01 X124.40675 Y5.87257
G01 X124.35613 Y5.93807
G01 X124.31907 Y5.99083
G01 X124.30320 Y6.01572
G01 X124.27874 Y6.05179
G01 X124.25776 Y6.08087
G01 X124.19535 Y6.18194
G01 X124.16832 Y6.23332
G01 X124.19677 Y6.28308
G01 X124.19715 Y6.28379
G01 X124.23820 Y6.35539
G01 X124.27716 Y6.41689
G01 X124.31646 Y6.47300
G01 X124.31867 Y6.47615
G01 X124.33424 Y6.49865
G01 X124.35611 Y6.52857
G01 X124.40673 Y6.59405
G01 X124.44612 Y6.65059
G01 X124.45077 Y6.65801
G01 X124.51478 Y6.78062
G01 X124.52999 Y6.81160
G01 X124.54114 Y6.84432
G01 X124.58260 Y6.97625
G01 X124.58455 Y6.98478
G01 X124.59667 Y7.05257
G01 X124.60878 Y7.14699
G01 X124.61132 Y7.19888
G01 X124.61219 Y7.23332
G01 X124.61219 Y8.73332
G01 X124.61132 Y8.76779
G01 X124.60878 Y8.81965
G01 X124.59667 Y8.91406
G01 X124.58455 Y8.98183
G01 X124.58260 Y8.99039
G01 X124.54114 Y9.12234
G01 X124.52999 Y9.15503
G01 X124.51475 Y9.18605
G01 X124.45077 Y9.30863
G01 X124.44612 Y9.31607
G01 X124.40675 Y9.37256
G01 X124.34780 Y9.44886
G01 X124.31580 Y9.48813
G01 X124.29743 Y9.51236
G01 X124.27221 Y9.54383
G01 X124.24770 Y9.57271
G01 X124.23500 Y9.58810
G01 X124.21623 Y9.71101
G01 X124.21366 Y9.74993
G01 X124.21216 Y9.79588
G01 X124.21216 Y10.59046
G01 X124.21823 Y10.68272
G01 X124.22839 Y10.75983
G01 X124.23279 Y10.78876
G01 X124.30124 Y10.88063
G01 X124.32695 Y10.90995
G01 X124.35839 Y10.94350
G01 X124.67175 Y11.25686
G01 X124.74130 Y11.31782
G01 X124.80302 Y11.36516
G01 X124.82651 Y11.38246
G01 X124.93992 Y11.39902
G01 X124.97884 Y11.40159
G01 X125.02479 Y11.40309
G01 X126.16210 Y11.40309
G01 X126.25432 Y11.39702
G01 X126.33144 Y11.38686
G01 X126.53502 Y11.33131
G01 X126.61213 Y11.29935
G01 X126.67721 Y11.26334
G01 X127.02994 Y11.26334
G01 X127.62107 Y11.50817
G01 X127.64464 Y11.51728
G01 X127.71325 Y11.54185
G01 X127.75353 Y11.55409
G01 X127.82214 Y11.57126
G01 X127.85714 Y11.57824
G01 X127.92575 Y11.58843
G01 X127.95775 Y11.59158
G01 X128.02638 Y11.59496
G01 X128.04192 Y11.59534
G01 X131.70293 Y11.59534
G01 X131.71847 Y11.59572
G01 X131.78708 Y11.59910
G01 X131.81725 Y11.60199
G01 X131.81888 Y11.60293
G01 X131.87953 Y11.63931
G01 X131.90351 Y11.65531
G01 X131.95921 Y11.69661
G01 X131.97903 Y11.71286
G01 X132.02993 Y11.75899
G01 X132.03879 Y11.76745
G01 X132.99180 Y12.72043
G01 X133.00026 Y12.72932
G01 X133.04639 Y12.78022
G01 X133.06264 Y12.80004
G01 X133.10394 Y12.85574
G01 X133.11212 Y12.86737
G01 X133.11456 Y12.88134
G01 X133.12472 Y12.94995
G01 X133.12723 Y12.97540
G01 X133.13061 Y13.04400
G01 X133.13092 Y13.05630
G01 X133.13092 Y30.58621
G01 X133.13061 Y30.59850
G01 X133.12723 Y30.66713
G01 X133.12472 Y30.69261
G01 X133.11456 Y30.76121
G01 X133.11212 Y30.77518
G01 X133.10394 Y30.78682
G01 X133.06264 Y30.84252
G01 X133.04639 Y30.86233
G01 X133.00026 Y30.91323
G01 X132.99180 Y30.92212
G01 X131.44169 Y32.47221
G01 X131.43280 Y32.48069
G01 X131.38190 Y32.52682
G01 X131.36209 Y32.54307
G01 X131.30638 Y32.58437
G01 X131.29480 Y32.59253
G01 X131.28078 Y32.59497
G01 X131.21215 Y32.60515
G01 X131.18672 Y32.60767
G01 X131.11809 Y32.61104
G01 X131.10583 Y32.61132
G01 X124.37292 Y32.61132
G01 X124.36065 Y32.61163
G01 X124.29202 Y32.61501
G01 X124.26657 Y32.61752
G01 X124.19794 Y32.62771
G01 X124.16969 Y32.63335
G01 X124.10109 Y32.65052
G01 X124.06789 Y32.66060
G01 X123.99929 Y32.68516
G01 X123.97942 Y32.69283
G01 X123.29497 Y32.97635
G01 X122.81295 Y33.45836
G01 X122.78065 Y33.49400
G01 X122.73713 Y33.54703
G01 X122.72441 Y33.56608
G01 X122.68377 Y33.62689
G01 X122.65141 Y33.68740
G01 X122.61466 Y33.77614
G01 X122.59474 Y33.84180
G01 X122.57600 Y33.93601
G01 X122.56929 Y34.00431
G01 X122.56693 Y34.05232
G01 X122.56693 Y36.08089
G01 X122.53040 Y36.11086
G01 X122.46248 Y36.17878
G01 X122.36299 Y36.30001
G01 X122.30963 Y36.37987
G01 X122.23569 Y36.51817
G01 X122.19893 Y36.60692
G01 X122.15342 Y36.75701
G01 X122.13691 Y36.83971
G01 X122.13691 Y38.07072
G01 X122.12047 Y38.15363
G01 X122.07493 Y38.30369
G01 X122.03818 Y38.39244
G01 X121.96426 Y38.53074
G01 X121.91090 Y38.61063
G01 X121.81141 Y38.73186
G01 X121.74349 Y38.79978
G01 X121.62225 Y38.89927
G01 X121.54237 Y38.95264
G01 X121.52802 Y38.96031
G01 X121.38791 Y38.96033
G01 X121.36879 Y38.96051
G01 X121.30107 Y38.96188
G01 X121.28459 Y38.96206
G01 X121.13711 Y38.96206
G01 X121.12076 Y38.96224
G01 X121.07003 Y38.96341
G01 X121.05487 Y38.96358
G01 X120.91242 Y38.96358
G01 X120.89729 Y38.96376
G01 X120.85157 Y38.96488
G01 X120.83643 Y38.96506
G01 X120.69398 Y38.96506
G01 X120.67882 Y38.96524
G01 X120.62805 Y38.96640
G01 X120.61179 Y38.96661
G01 X120.46422 Y38.96661
G01 X120.44786 Y38.96679
G01 X120.38017 Y38.96816
G01 X120.36086 Y38.96833
G01 X120.22083 Y38.96833
G01 X120.19150 Y38.95264
G01 X120.11164 Y38.89927
G01 X119.99040 Y38.79978
G01 X119.92248 Y38.73186
G01 X119.82299 Y38.61063
G01 X119.76963 Y38.53074
G01 X119.69569 Y38.39244
G01 X119.65893 Y38.30369
G01 X119.61342 Y38.15363
G01 X119.59693 Y38.07072
G01 X119.59693 Y36.83971
G01 X119.58047 Y36.75701
G01 X119.53493 Y36.60692
G01 X119.49818 Y36.51817
G01 X119.42426 Y36.37987
G01 X119.37090 Y36.30001
G01 X119.35192 Y36.27690
G01 X119.27141 Y36.17878
G01 X119.20349 Y36.11086
G01 X119.16691 Y36.08086
G01 X119.16691 Y33.51732
G01 X119.16455 Y33.46931
G01 X119.15784 Y33.40101
G01 X119.13910 Y33.30680
G01 X119.11918 Y33.24114
G01 X119.08243 Y33.15242
G01 X119.05007 Y33.09189
G01 X118.99671 Y33.01203
G01 X118.95320 Y32.95900
G01 X118.92089 Y32.92336
G01 X117.60090 Y31.60335
G01 X117.56529 Y31.57107
G01 X117.51223 Y31.52753
G01 X117.43237 Y31.47417
G01 X117.37187 Y31.44183
G01 X117.28312 Y31.40505
G01 X117.21746 Y31.38514
G01 X117.12325 Y31.36639
G01 X117.05495 Y31.35969
G01 X117.00695 Y31.35733
G01 X116.41617 Y31.35733
G01 X116.31175 Y31.38349
G01 X116.22254 Y31.40127
G01 X116.06572 Y31.42453
G01 X115.98363 Y31.43264
G01 X115.82679 Y31.44033
G01 X115.74703 Y31.44033
G01 X115.59024 Y31.43264
G01 X115.50817 Y31.42453
G01 X115.35132 Y31.40129
G01 X115.26209 Y31.38349
G01 X115.15762 Y31.35733
G01 X113.87617 Y31.35733
G01 X113.77175 Y31.38349
G01 X113.68254 Y31.40127
G01 X113.52572 Y31.42453
G01 X113.44363 Y31.43264
G01 X113.28679 Y31.44033
G01 X113.20703 Y31.44033
G01 X113.05024 Y31.43264
G01 X112.96817 Y31.42453
G01 X112.81132 Y31.40129
G01 X112.72209 Y31.38349
G01 X112.61762 Y31.35733
G01 X111.85738 Y31.35733
G01 X111.75354 Y31.25349
G01 X111.68046 Y31.23137
G01 X111.60335 Y31.19941
G01 X111.42014 Y31.09479
G01 X111.35842 Y31.04742
G01 X111.28887 Y30.98649
G01 X110.13444 Y29.83206
G01 X110.10295 Y29.79845
G01 X110.07724 Y29.76914
G01 X110.00879 Y29.67724
G01 X110.00439 Y29.64834
G01 X109.99423 Y29.57122
G01 X109.98816 Y29.47900
G01 X109.98816 Y29.05751
G01 X109.99053 Y28.99998
G01 X109.99451 Y28.95141
G01 X109.99743 Y28.92299
G01 X109.99741 Y28.11707
G01 X109.94587 Y28.00808
G01 X109.92179 Y27.95012
G01 X109.86568 Y27.79327
G01 X109.85250 Y27.74994
G01 X109.81321 Y27.59312
G01 X109.80650 Y27.55944
G01 X109.78324 Y27.40262
G01 X109.78044 Y27.37438
G01 X109.77275 Y27.21756
G01 X109.77242 Y27.20432
G01 X109.77242 Y26.40430
G01 X109.77275 Y26.39109
G01 X109.78044 Y26.23430
G01 X109.78324 Y26.20605
G01 X109.80650 Y26.04921
G01 X109.81321 Y26.01553
G01 X109.85250 Y25.85873
G01 X109.86568 Y25.81538
G01 X109.92179 Y25.65856
G01 X109.94587 Y25.60057
G01 X109.99743 Y25.49158
G01 X109.99743 Y24.66758
G01 X109.99423 Y24.64339
G01 X109.98816 Y24.55112
G01 X109.98816 Y21.21960
G01 X109.98872 Y21.19176
G01 X109.98964 Y21.16842
G01 X110.00495 Y21.04703
G01 X110.02134 Y20.96992
G01 X110.09997 Y20.75209
G01 X110.11801 Y20.71668
G01 X110.06238 Y20.62390
G01 X110.02004 Y20.54490
G01 X109.94587 Y20.38808
G01 X109.92179 Y20.33012
G01 X109.86568 Y20.17327
G01 X109.85250 Y20.12992
G01 X109.81321 Y19.97312
G01 X109.80650 Y19.93944
G01 X109.78324 Y19.78260
G01 X109.78044 Y19.75435
G01 X109.77275 Y19.59756
G01 X109.77242 Y19.58432
G01 X109.77242 Y18.78430
G01 X109.77275 Y18.77109
G01 X109.78044 Y18.61430
G01 X109.78324 Y18.58605
G01 X109.80650 Y18.42921
G01 X109.81321 Y18.39553
G01 X109.85250 Y18.23873
G01 X109.86568 Y18.19538
G01 X109.92179 Y18.03853
G01 X109.94587 Y17.98057
G01 X110.02004 Y17.82375
G01 X110.06238 Y17.74476
G01 X110.12791 Y17.63543
G01 X110.12789 Y15.04126
G01 X110.10097 Y14.99101
G01 X110.02215 Y14.82442
G01 X109.99208 Y14.75203
G01 X109.93246 Y14.58543
G01 X109.91544 Y14.52939
G01 X109.87369 Y14.36277
G01 X109.86464 Y14.31741
G01 X109.83993 Y14.15078
G01 X109.83607 Y14.11156
G01 X109.82789 Y13.94497
G01 X109.82743 Y13.92635
G01 X109.82743 Y13.67634
G01 X109.82789 Y13.65769
G01 X109.83607 Y13.49107
G01 X109.83993 Y13.45185
G01 X109.86464 Y13.28523
G01 X109.87369 Y13.23989
G01 X109.90363 Y13.12038
G01 X109.93200 Y13.08210
G01 X109.96401 Y13.04311
G01 X110.07602 Y12.91949
G01 X110.11008 Y12.88546
G01 X110.17541 Y12.82622
G01 X110.25397 Y12.79813
G01 X110.29619 Y12.78528
G01 X110.46284 Y12.74355
G01 X110.49497 Y12.73714
G01 X110.66159 Y12.71243
G01 X110.68801 Y12.70981
G01 X110.85463 Y12.70164
G01 X110.87920 Y12.70164
G01 X111.04585 Y12.70981
G01 X111.07226 Y12.71243
G01 X111.23889 Y12.73714
G01 X111.27104 Y12.74355
G01 X111.43764 Y12.78528
G01 X111.47985 Y12.79813
G01 X111.64650 Y12.85774
G01 X111.70393 Y12.88159
G01 X111.87056 Y12.96041
G01 X111.94991 Y13.00296
G01 X112.05562 Y13.06630
G01 X112.08437 Y13.12005
G01 X112.11691 Y13.19864
G01 X112.11691 Y14.40394
G01 X112.08437 Y14.48258
G01 X112.00584 Y14.62952
G01 X111.95247 Y14.70940
G01 X111.84676 Y14.83821
G01 X111.77884 Y14.90613
G01 X111.65004 Y15.01184
G01 X111.57015 Y15.06521
G01 X111.42321 Y15.14374
G01 X111.33447 Y15.18052
G01 X111.17500 Y15.22889
G01 X111.08080 Y15.24763
G01 X110.91496 Y15.26396
G01 X110.81890 Y15.26396
G01 X110.65309 Y15.24763
G01 X110.55888 Y15.22889
G01 X110.52352 Y15.21817
G01 X110.39942 Y15.18052
G01 X110.31067 Y15.14374
G01 X110.16373 Y15.06521
G01 X110.12789 Y15.04126
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.11691 Y14.40394 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.11691 Y14.40394
G01 X112.14950 Y14.48258
G01 X112.22804 Y14.62952
G01 X112.28140 Y14.70940
G01 X112.36192 Y14.80750
G01 X112.38712 Y14.83821
G01 X112.45504 Y14.90613
G01 X112.58384 Y15.01184
G01 X112.66372 Y15.06521
G01 X112.81066 Y15.14374
G01 X112.89941 Y15.18052
G01 X113.05887 Y15.22889
G01 X113.15308 Y15.24763
G01 X113.31892 Y15.26396
G01 X113.41495 Y15.26396
G01 X113.58079 Y15.24763
G01 X113.67500 Y15.22889
G01 X113.83446 Y15.18052
G01 X113.92321 Y15.14374
G01 X114.07015 Y15.06521
G01 X114.15003 Y15.01184
G01 X114.27883 Y14.90613
G01 X114.34675 Y14.83821
G01 X114.45247 Y14.70940
G01 X114.50583 Y14.62952
G01 X114.58437 Y14.48258
G01 X114.61693 Y14.40397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X110.12791 Y17.63543 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X110.12791 Y17.63543
G01 X110.16980 Y17.61306
G01 X110.25855 Y17.57630
G01 X110.40864 Y17.53079
G01 X110.50284 Y17.51204
G01 X110.65890 Y17.49667
G01 X110.75496 Y17.49667
G01 X110.91105 Y17.51204
G01 X111.00526 Y17.53079
G01 X111.15532 Y17.57630
G01 X111.24407 Y17.61306
G01 X111.38237 Y17.68700
G01 X111.46225 Y17.74036
G01 X111.58349 Y17.83985
G01 X111.65141 Y17.90777
G01 X111.73192 Y18.00589
G01 X111.75090 Y18.02901
G01 X111.80426 Y18.10886
G01 X111.87818 Y18.24719
G01 X111.91493 Y18.33591
G01 X111.96047 Y18.48600
G01 X111.97693 Y18.56873
G01 X111.97693 Y19.79974
G01 X111.96047 Y19.88262
G01 X111.92258 Y20.00751
G01 X111.92230 Y20.00769
G01 X111.92230 Y20.00772
G01 X111.89725 Y20.02733
G01 X111.82202 Y20.09149
G01 X111.81054 Y20.10147
G01 X111.74882 Y20.15593
G01 X111.69918 Y20.20365
G01 X111.64912 Y20.25613
G01 X111.63683 Y20.26936
G01 X111.60548 Y20.30393
G01 X111.58524 Y20.32725
G01 X111.54402 Y20.37274
G01 X111.49532 Y20.42143
G01 X111.45392 Y20.45895
G01 X111.37396 Y20.52075
G01 X111.31740 Y20.56014
G01 X111.30838 Y20.56581
G01 X111.17876 Y20.63345
G01 X111.14778 Y20.64866
G01 X111.11509 Y20.65981
G01 X110.97566 Y20.70363
G01 X110.96525 Y20.70601
G01 X110.89743 Y20.71810
G01 X110.79718 Y20.73098
G01 X110.74138 Y20.73373
G01 X110.67247 Y20.73373
G01 X110.61669 Y20.73098
G01 X110.56584 Y20.72445
G01 X110.51626 Y20.71986
G01 X110.47335 Y20.71742
G01 X110.44582 Y20.71534
G01 X110.39507 Y20.71051
G01 X110.28420 Y20.70782
G01 X110.19319 Y20.71183
G01 X110.16713 Y20.71330
G01 X110.11801 Y20.71668
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.97693 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.97693 Y19.79974
G01 X111.99342 Y19.88262
G01 X112.03203 Y20.00993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.92230 Y20.00769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.92230 Y20.00769
G01 X111.95280 Y20.00452
G01 X112.03203 Y20.00993
G01 X112.03739 Y20.01432
G01 X112.05351 Y20.02834
G01 X112.10642 Y20.07157
G01 X112.13218 Y20.09123
G01 X112.25382 Y20.20406
G01 X112.26863 Y20.22095
G01 X112.30302 Y20.25753
G01 X112.32255 Y20.27691
G01 X112.36860 Y20.32725
G01 X112.40983 Y20.37274
G01 X112.45852 Y20.42143
G01 X112.49992 Y20.45895
G01 X112.57988 Y20.52075
G01 X112.63644 Y20.56014
G01 X112.64546 Y20.56581
G01 X112.77508 Y20.63345
G01 X112.80609 Y20.64866
G01 X112.83875 Y20.65981
G01 X112.85745 Y20.66568
G01 X112.97818 Y20.70360
G01 X112.98864 Y20.70601
G01 X113.05643 Y20.71810
G01 X113.15669 Y20.73098
G01 X113.21247 Y20.73373
G01 X113.28138 Y20.73373
G01 X113.33718 Y20.73098
G01 X113.43743 Y20.71810
G01 X113.50525 Y20.70601
G01 X113.51566 Y20.70363
G01 X113.65509 Y20.65981
G01 X113.68778 Y20.64866
G01 X113.71876 Y20.63345
G01 X113.84838 Y20.56581
G01 X113.85740 Y20.56014
G01 X113.91396 Y20.52075
G01 X113.99392 Y20.45895
G01 X114.03532 Y20.42143
G01 X114.08402 Y20.37274
G01 X114.12524 Y20.32725
G01 X114.14548 Y20.30393
G01 X114.17683 Y20.26936
G01 X114.18912 Y20.25613
G01 X114.23918 Y20.20365
G01 X114.28882 Y20.15593
G01 X114.35054 Y20.10147
G01 X114.36202 Y20.09149
G01 X114.43725 Y20.02733
G01 X114.46230 Y20.00772
G01 X114.46230 Y20.00769
G01 X114.46258 Y20.00751
G01 X114.50047 Y19.88262
G01 X114.51691 Y19.79974
G01 X114.51691 Y18.56873
G01 X114.50047 Y18.48600
G01 X114.45493 Y18.33591
G01 X114.41818 Y18.24719
G01 X114.34426 Y18.10886
G01 X114.29090 Y18.02901
G01 X114.27192 Y18.00589
G01 X114.19141 Y17.90777
G01 X114.12349 Y17.83985
G01 X114.00225 Y17.74036
G01 X113.92237 Y17.68700
G01 X113.78407 Y17.61306
G01 X113.69532 Y17.57630
G01 X113.54526 Y17.53079
G01 X113.45105 Y17.51204
G01 X113.29496 Y17.49667
G01 X113.19890 Y17.49667
G01 X113.04284 Y17.51204
G01 X112.94864 Y17.53079
G01 X112.79855 Y17.57630
G01 X112.70980 Y17.61306
G01 X112.57150 Y17.68700
G01 X112.49164 Y17.74036
G01 X112.37040 Y17.83985
G01 X112.30248 Y17.90777
G01 X112.20299 Y18.02901
G01 X112.14963 Y18.10886
G01 X112.07569 Y18.24719
G01 X112.03893 Y18.33591
G01 X111.99342 Y18.48600
G01 X111.97693 Y18.56873
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.51691 Y18.56873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.51691 Y18.56873
G01 X114.53342 Y18.48600
G01 X114.57893 Y18.33591
G01 X114.61569 Y18.24719
G01 X114.68963 Y18.10886
G01 X114.74299 Y18.02901
G01 X114.84248 Y17.90777
G01 X114.91040 Y17.83985
G01 X115.03164 Y17.74036
G01 X115.11150 Y17.68700
G01 X115.24980 Y17.61306
G01 X115.33855 Y17.57630
G01 X115.48864 Y17.53079
G01 X115.58284 Y17.51204
G01 X115.73890 Y17.49667
G01 X115.83496 Y17.49667
G01 X115.99105 Y17.51204
G01 X116.08526 Y17.53079
G01 X116.23532 Y17.57630
G01 X116.32407 Y17.61306
G01 X116.46237 Y17.68700
G01 X116.54225 Y17.74036
G01 X116.66349 Y17.83985
G01 X116.73141 Y17.90777
G01 X116.81192 Y18.00589
G01 X116.83090 Y18.02901
G01 X116.88426 Y18.10886
G01 X116.95818 Y18.24719
G01 X116.99493 Y18.33591
G01 X117.04047 Y18.48600
G01 X117.05693 Y18.56873
G01 X117.05693 Y19.79974
G01 X117.04047 Y19.88262
G01 X117.00258 Y20.00751
G01 X117.00230 Y20.00769
G01 X117.00230 Y20.00772
G01 X116.97725 Y20.02733
G01 X116.90202 Y20.09149
G01 X116.89054 Y20.10147
G01 X116.82882 Y20.15593
G01 X116.77918 Y20.20365
G01 X116.72912 Y20.25613
G01 X116.71683 Y20.26936
G01 X116.68548 Y20.30393
G01 X116.66524 Y20.32725
G01 X116.62402 Y20.37274
G01 X116.57532 Y20.42143
G01 X116.53392 Y20.45895
G01 X116.45396 Y20.52075
G01 X116.39740 Y20.56014
G01 X116.38838 Y20.56581
G01 X116.25876 Y20.63345
G01 X116.22778 Y20.64866
G01 X116.19509 Y20.65981
G01 X116.05566 Y20.70363
G01 X116.04525 Y20.70601
G01 X115.97743 Y20.71810
G01 X115.87718 Y20.73098
G01 X115.82138 Y20.73373
G01 X115.75247 Y20.73373
G01 X115.69669 Y20.73098
G01 X115.59643 Y20.71810
G01 X115.52864 Y20.70601
G01 X115.51818 Y20.70360
G01 X115.39745 Y20.66568
G01 X115.37875 Y20.65981
G01 X115.34609 Y20.64866
G01 X115.31508 Y20.63345
G01 X115.18546 Y20.56581
G01 X115.17644 Y20.56014
G01 X115.11988 Y20.52075
G01 X115.03992 Y20.45895
G01 X114.99852 Y20.42143
G01 X114.94983 Y20.37274
G01 X114.90860 Y20.32725
G01 X114.86255 Y20.27691
G01 X114.84302 Y20.25753
G01 X114.80863 Y20.22095
G01 X114.79382 Y20.20406
G01 X114.67218 Y20.09123
G01 X114.64642 Y20.07157
G01 X114.59351 Y20.02834
G01 X114.57738 Y20.01432
G01 X114.57203 Y20.00993
G01 X114.49280 Y20.00452
G01 X114.46230 Y20.00769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.51691 Y19.79974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.51691 Y19.79974
G01 X114.53342 Y19.88262
G01 X114.57203 Y20.00993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.12992 Y25.76574 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.12992 Y25.76574
G01 X112.07569 Y25.86719
G01 X112.03893 Y25.95591
G01 X111.99342 Y26.10600
G01 X111.97693 Y26.18876
G01 X111.97693 Y27.41974
G01 X111.99342 Y27.50262
G01 X112.03893 Y27.65271
G01 X112.07569 Y27.74143
G01 X112.14963 Y27.87976
G01 X112.20299 Y27.95962
G01 X112.30248 Y28.08085
G01 X112.37040 Y28.14877
G01 X112.49164 Y28.24826
G01 X112.57150 Y28.30163
G01 X112.60548 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.97693 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.97693 Y27.41974
G01 X111.96047 Y27.50262
G01 X111.91493 Y27.65271
G01 X111.87818 Y27.74143
G01 X111.80426 Y27.87976
G01 X111.75090 Y27.95962
G01 X111.65141 Y28.08085
G01 X111.58349 Y28.14877
G01 X111.54739 Y28.17839
G01 X111.54757 Y28.26665
G01 X111.58321 Y28.25710
G01 X111.68542 Y28.25177
G01 X111.76246 Y28.25581
G01 X111.84704 Y28.26770
G01 X111.85163 Y28.26917
G01 X111.92824 Y28.29406
G01 X112.00365 Y28.33414
G01 X112.06832 Y28.37615
G01 X112.13563 Y28.42871
G01 X112.19278 Y28.49221
G01 X112.23807 Y28.56462
G01 X112.26090 Y28.60943
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.18158 Y30.90046 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.18158 Y30.90046
G01 X112.18351 Y30.96147
G01 X112.20299 Y30.99063
G01 X112.30248 Y31.11186
G01 X112.37040 Y31.17978
G01 X112.49164 Y31.27927
G01 X112.57150 Y31.33264
G01 X112.61762 Y31.35733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X111.75354 Y31.25349 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X111.75354 Y31.25349
G01 X111.77046 Y31.25862
G01 X111.84800 Y31.23784
G01 X111.92540 Y31.20175
G01 X111.99220 Y31.16319
G01 X112.06220 Y31.11420
G01 X112.12263 Y31.05377
G01 X112.17162 Y30.98377
G01 X112.18356 Y30.96312
G01 X112.18158 Y30.90046
G01 X112.18166 Y30.89357
G01 X112.16786 Y30.72311
G01 X112.15862 Y30.67203
G01 X112.15478 Y30.64862
G01 X112.14681 Y30.59487
G01 X112.12938 Y30.51176
G01 X112.12524 Y30.49370
G01 X112.11310 Y30.42578
G01 X112.10025 Y30.32558
G01 X112.09751 Y30.26972
G01 X112.09667 Y30.23531
G01 X112.09667 Y29.43533
G01 X112.09751 Y29.40092
G01 X112.10025 Y29.34509
G01 X112.11313 Y29.24488
G01 X112.12524 Y29.17702
G01 X112.12763 Y29.16660
G01 X112.14762 Y29.10300
G01 X112.16692 Y29.04156
G01 X112.17129 Y29.02708
G01 X112.19085 Y28.95979
G01 X112.19314 Y28.95177
G01 X112.21432 Y28.87570
G01 X112.23088 Y28.80338
G01 X112.24671 Y28.71593
G01 X112.25743 Y28.64135
G01 X112.26090 Y28.60943
G01 X112.30248 Y28.55878
G01 X112.37040 Y28.49086
G01 X112.49164 Y28.39137
G01 X112.57150 Y28.33800
G01 X112.60548 Y28.31984
G01 X113.88833 Y28.31984
G01 X113.92237 Y28.33800
G01 X114.00225 Y28.39137
G01 X114.12349 Y28.49086
G01 X114.19141 Y28.55878
G01 X114.29090 Y28.68001
G01 X114.34426 Y28.75987
G01 X114.41818 Y28.89817
G01 X114.45493 Y28.98692
G01 X114.50047 Y29.13701
G01 X114.51691 Y29.21971
G01 X114.51691 Y30.45072
G01 X114.50047 Y30.53363
G01 X114.45493 Y30.68369
G01 X114.41818 Y30.77244
G01 X114.34426 Y30.91074
G01 X114.29090 Y30.99063
G01 X114.19141 Y31.11186
G01 X114.12349 Y31.17978
G01 X114.00225 Y31.27927
G01 X113.92237 Y31.33264
G01 X113.87617 Y31.35733
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X115.15762 Y31.35733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X115.15762 Y31.35733
G01 X115.11150 Y31.33264
G01 X115.03164 Y31.27927
G01 X114.91040 Y31.17978
G01 X114.84248 Y31.11186
G01 X114.74299 Y30.99063
G01 X114.68963 Y30.91074
G01 X114.61569 Y30.77244
G01 X114.57893 Y30.68369
G01 X114.53342 Y30.53363
G01 X114.51691 Y30.45072
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.51691 Y29.21971 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.51691 Y29.21971
G01 X114.53342 Y29.13701
G01 X114.57893 Y28.98692
G01 X114.61569 Y28.89817
G01 X114.68963 Y28.75987
G01 X114.74299 Y28.68001
G01 X114.84248 Y28.55878
G01 X114.91040 Y28.49086
G01 X115.03164 Y28.39137
G01 X115.11150 Y28.33800
G01 X115.14548 Y28.31984
G01 X116.42833 Y28.31984
G01 X116.46237 Y28.30163
G01 X116.54225 Y28.24826
G01 X116.66349 Y28.14877
G01 X116.73141 Y28.08085
G01 X116.83090 Y27.95962
G01 X116.88426 Y27.87976
G01 X116.95818 Y27.74143
G01 X116.99493 Y27.65271
G01 X117.04047 Y27.50262
G01 X117.05693 Y27.41974
G01 X117.05693 Y26.18876
G01 X117.04047 Y26.10600
G01 X117.00187 Y25.97877
G01 X117.00166 Y25.97862
G01 X116.99646 Y25.97436
G01 X116.98040 Y25.96038
G01 X116.92742 Y25.91713
G01 X116.90161 Y25.89737
G01 X116.78000 Y25.78457
G01 X116.76509 Y25.76757
G01 X116.73082 Y25.73112
G01 X116.71116 Y25.71159
G01 X116.66537 Y25.66155
G01 X116.62402 Y25.61591
G01 X116.57532 Y25.56722
G01 X116.53392 Y25.52970
G01 X116.45396 Y25.46790
G01 X116.39740 Y25.42851
G01 X116.38838 Y25.42287
G01 X116.25874 Y25.35520
G01 X116.22778 Y25.34002
G01 X116.19509 Y25.32884
G01 X116.05564 Y25.28502
G01 X116.04525 Y25.28266
G01 X115.97743 Y25.27057
G01 X115.87718 Y25.25767
G01 X115.82138 Y25.25493
G01 X115.75247 Y25.25493
G01 X115.69666 Y25.25767
G01 X115.59643 Y25.27057
G01 X115.52864 Y25.28266
G01 X115.51823 Y25.28502
G01 X115.37875 Y25.32884
G01 X115.34604 Y25.34002
G01 X115.31510 Y25.35520
G01 X115.18546 Y25.42284
G01 X115.17644 Y25.42851
G01 X115.11990 Y25.46796
G01 X115.03992 Y25.52970
G01 X114.99852 Y25.56724
G01 X114.94983 Y25.61591
G01 X114.90845 Y25.66155
G01 X114.88846 Y25.68459
G01 X114.85712 Y25.71919
G01 X114.84472 Y25.73252
G01 X114.79463 Y25.78505
G01 X114.74510 Y25.83262
G01 X114.68340 Y25.88713
G01 X114.67180 Y25.89719
G01 X114.59671 Y25.96127
G01 X114.57154 Y25.98093
G01 X114.54096 Y25.98416
G01 X114.46166 Y25.97862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.59671 Y25.96127 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.59671 Y25.96127
G01 X114.57129 Y25.98119
G01 X114.53342 Y26.10600
G01 X114.51691 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.51691 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.51691 Y27.41974
G01 X114.53342 Y27.50262
G01 X114.57893 Y27.65271
G01 X114.61569 Y27.74143
G01 X114.68963 Y27.87976
G01 X114.74299 Y27.95962
G01 X114.84248 Y28.08085
G01 X114.91040 Y28.14877
G01 X115.03164 Y28.24826
G01 X115.11150 Y28.30163
G01 X115.14548 Y28.31984
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X113.88833 Y28.31984 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X113.88833 Y28.31984
G01 X113.92237 Y28.30163
G01 X114.00225 Y28.24826
G01 X114.12349 Y28.14877
G01 X114.19141 Y28.08085
G01 X114.29090 Y27.95962
G01 X114.34426 Y27.87976
G01 X114.41818 Y27.74143
G01 X114.45493 Y27.65271
G01 X114.50047 Y27.50262
G01 X114.51691 Y27.41974
G01 X114.51691 Y26.18876
G01 X114.50047 Y26.10600
G01 X114.46187 Y25.97877
G01 X114.46166 Y25.97862
G01 X114.45646 Y25.97436
G01 X114.44040 Y25.96038
G01 X114.38742 Y25.91713
G01 X114.36161 Y25.89737
G01 X114.24000 Y25.78457
G01 X114.22509 Y25.76757
G01 X114.19082 Y25.73112
G01 X114.17116 Y25.71159
G01 X114.12537 Y25.66155
G01 X114.08402 Y25.61591
G01 X114.03532 Y25.56722
G01 X113.99392 Y25.52970
G01 X113.91396 Y25.46790
G01 X113.85740 Y25.42851
G01 X113.84838 Y25.42287
G01 X113.71874 Y25.35520
G01 X113.68778 Y25.34002
G01 X113.65509 Y25.32884
G01 X113.51564 Y25.28502
G01 X113.50525 Y25.28266
G01 X113.43743 Y25.27057
G01 X113.33718 Y25.25767
G01 X113.28138 Y25.25493
G01 X113.21247 Y25.25493
G01 X113.15666 Y25.25767
G01 X113.05643 Y25.27057
G01 X112.98864 Y25.28266
G01 X112.97823 Y25.28502
G01 X112.83875 Y25.32884
G01 X112.80604 Y25.34002
G01 X112.77510 Y25.35520
G01 X112.64546 Y25.42287
G01 X112.63644 Y25.42851
G01 X112.57988 Y25.46790
G01 X112.48481 Y25.54139
G01 X112.45511 Y25.56310
G01 X112.41168 Y25.59320
G01 X112.39588 Y25.60448
G01 X112.35047 Y25.63773
G01 X112.25958 Y25.69546
G01 X112.17460 Y25.74228
G01 X112.14564 Y25.75767
G01 X112.12992 Y25.76574
G01 X112.06799 Y25.75759
G01 X111.98455 Y25.73910
G01 X111.90561 Y25.70641
G01 X111.83355 Y25.66051
G01 X111.77236 Y25.61355
G01 X111.71844 Y25.55962
G01 X111.71661 Y25.56140
G01 X111.57251 Y25.41728
G01 X111.54694 Y25.39765
G01 X111.54694 Y25.42988
G01 X111.58349 Y25.45988
G01 X111.65141 Y25.52777
G01 X111.75090 Y25.64903
G01 X111.78156 Y25.69488
G01 X111.80426 Y25.72886
G01 X111.87818 Y25.86719
G01 X111.91493 Y25.95591
G01 X111.96047 Y26.10600
G01 X111.97693 Y26.18876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X102.54772 Y35.76783 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X102.54772 Y35.76783
G01 X102.54998 Y35.80228
G01 X102.56405 Y35.95737
G01 X102.56423 Y35.95846
G01 X102.57944 Y36.02577
G01 X102.61160 Y36.14147
G01 X102.62437 Y36.17601
G01 X102.65140 Y36.23938
G01 X102.68825 Y36.31530
G01 X102.72526 Y36.37774
G01 X102.76318 Y36.43514
G01 X102.79204 Y36.47446
G01 X102.86301 Y36.55610
G01 X102.91073 Y36.60583
G01 X102.92023 Y36.61482
G01 X103.03258 Y36.70461
G01 X103.06976 Y36.73237
G01 X103.08952 Y36.74340
G01 X103.22765 Y36.81769
G01 X103.23720 Y36.82275
G01 X103.29186 Y36.84296
G01 X103.41739 Y36.88353
G01 X103.44169 Y36.88922
G01 X103.50946 Y36.90161
G01 X103.60492 Y36.91426
G01 X103.66552 Y36.91723
G01 X103.73433 Y36.91723
G01 X103.79493 Y36.91426
G01 X103.89039 Y36.90161
G01 X103.95815 Y36.88922
G01 X103.98246 Y36.88353
G01 X104.10799 Y36.84296
G01 X104.16262 Y36.82275
G01 X104.17220 Y36.81769
G01 X104.31032 Y36.74340
G01 X104.33009 Y36.73237
G01 X104.36727 Y36.70461
G01 X104.47961 Y36.61480
G01 X104.48911 Y36.60583
G01 X104.53684 Y36.55610
G01 X104.60781 Y36.47446
G01 X104.63666 Y36.43514
G01 X104.67459 Y36.37774
G01 X104.71159 Y36.31530
G01 X104.74845 Y36.23938
G01 X104.77547 Y36.17601
G01 X104.78825 Y36.14144
G01 X104.82043 Y36.02577
G01 X104.83562 Y35.95846
G01 X104.83580 Y35.95739
G01 X104.84987 Y35.80228
G01 X104.85213 Y35.76783
G01 X104.84987 Y35.73337
G01 X104.83580 Y35.57825
G01 X104.83562 Y35.57718
G01 X104.82043 Y35.50990
G01 X104.78825 Y35.39420
G01 X104.77547 Y35.35963
G01 X104.74845 Y35.29626
G01 X104.71159 Y35.22034
G01 X104.67459 Y35.15790
G01 X104.63666 Y35.10050
G01 X104.60781 Y35.06118
G01 X104.53684 Y34.97954
G01 X104.48911 Y34.92981
G01 X104.47961 Y34.92082
G01 X104.36727 Y34.83103
G01 X104.33011 Y34.80329
G01 X104.31027 Y34.79222
G01 X104.17217 Y34.71795
G01 X104.16265 Y34.71292
G01 X104.10804 Y34.69273
G01 X103.98246 Y34.65214
G01 X103.97652 Y34.65074
G01 X103.95820 Y34.64645
G01 X103.89039 Y34.63405
G01 X103.79491 Y34.62138
G01 X103.73433 Y34.61841
G01 X103.66552 Y34.61841
G01 X103.60494 Y34.62138
G01 X103.50946 Y34.63405
G01 X103.45808 Y34.64282
G01 X103.44164 Y34.64645
G01 X103.41741 Y34.65211
G01 X103.29181 Y34.69273
G01 X103.23720 Y34.71292
G01 X103.22767 Y34.71795
G01 X103.08957 Y34.79222
G01 X103.06974 Y34.80329
G01 X103.03258 Y34.83103
G01 X102.92026 Y34.92082
G01 X102.91076 Y34.92981
G01 X102.86301 Y34.97954
G01 X102.79204 Y35.06118
G01 X102.76318 Y35.10050
G01 X102.72526 Y35.15790
G01 X102.68828 Y35.22034
G01 X102.65140 Y35.29626
G01 X102.62437 Y35.35965
G01 X102.61160 Y35.39422
G01 X102.57942 Y35.50990
G01 X102.56423 Y35.57721
G01 X102.56405 Y35.57827
G01 X102.54998 Y35.73337
G01 X102.54772 Y35.76783
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.20292 Y36.79834 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.20292 Y36.79834
G01 X99.16947 Y37.02732
G01 X99.14635 Y37.07055
G01 X99.14356 Y37.07395
G01 X98.94015 Y37.12023
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.17742 Y37.09592 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.17742 Y37.09592
G01 X99.14168 Y37.07438
G01 X98.94015 Y37.12023
G01 X98.89918 Y37.12843
G01 X98.82646 Y37.14093
G01 X98.77960 Y37.14738
G01 X98.73891 Y37.14858
G01 X97.03891 Y37.14858
G01 X96.99827 Y37.14741
G01 X96.98077 Y37.14535
G01 X96.89464 Y37.11888
G01 X96.82215 Y37.07504
G01 X96.76221 Y37.01510
G01 X96.71837 Y36.94261
G01 X96.69190 Y36.85648
G01 X96.68984 Y36.83898
G01 X96.68867 Y36.79834
G01 X96.68867 Y35.09834
G01 X96.68984 Y35.05767
G01 X96.69190 Y35.04017
G01 X96.71837 Y34.95402
G01 X96.75276 Y34.89555
G01 X96.76216 Y34.88158
G01 X96.82212 Y34.82161
G01 X96.84930 Y34.80378
G01 X96.89469 Y34.77774
G01 X96.98077 Y34.75130
G01 X96.99827 Y34.74924
G01 X97.03891 Y34.74807
G01 X98.73891 Y34.74807
G01 X98.77960 Y34.74927
G01 X98.82646 Y34.75572
G01 X98.94308 Y34.77576
G01 X99.00901 Y34.78981
G01 X99.14478 Y34.82415
G01 X99.14635 Y34.82608
G01 X99.16977 Y34.86987
G01 X99.17693 Y34.91922
G01 X99.20292 Y35.09834
G01 X99.20292 Y36.79834
G01 X99.17693 Y36.97626
G01 X99.17693 Y37.09501
G01 X99.17742 Y37.09592
G01 X99.18272 Y37.10588
G01 X99.21389 Y37.16704
G01 X99.29817 Y37.41947
G01 X99.30787 Y37.48066
G01 X99.31668 Y37.59168
G01 X99.31668 Y49.85437
G01 X99.31592 Y49.88658
G01 X99.31511 Y49.90456
G01 X99.29334 Y50.05005
G01 X99.27785 Y50.11121
G01 X99.17693 Y50.33976
G01 X99.17691 Y50.51347
G01 X99.18255 Y50.52925
G01 X99.21059 Y50.62142
G01 X99.24986 Y50.77824
G01 X99.26583 Y50.85843
G01 X99.28910 Y51.01528
G01 X99.29634 Y51.08853
G01 X99.30406 Y51.24535
G01 X99.30406 Y51.31660
G01 X99.29634 Y51.47341
G01 X99.28910 Y51.54672
G01 X99.26583 Y51.70354
G01 X99.24986 Y51.78370
G01 X99.21059 Y51.94052
G01 X99.18255 Y52.03270
G01 X99.17691 Y52.04842
G01 X99.17693 Y52.21139
G01 X99.17724 Y52.21195
G01 X99.18265 Y52.22165
G01 X99.21381 Y52.28279
G01 X99.29817 Y52.53536
G01 X99.30787 Y52.59655
G01 X99.31668 Y52.70758
G01 X99.31668 Y54.52213
G01 X99.31625 Y54.54618
G01 X99.31579 Y54.55951
G01 X99.29794 Y54.69553
G01 X99.28399 Y54.75672
G01 X99.17569 Y55.01895
G01 X99.17112 Y55.02210
G01 X99.11724 Y55.05108
G01 X99.02250 Y55.08989
G01 X98.92174 Y55.10818
G01 X98.81940 Y55.10513
G01 X98.75877 Y55.09693
G01 X98.68356 Y55.08065
G01 X98.63574 Y55.06208
G01 X98.43523 Y55.00023
G01 X98.24110 Y54.97097
G01 X98.04475 Y54.97097
G01 X98.02398 Y54.97409
G01 X98.04785 Y54.99797
G01 X98.09492 Y54.99332
G01 X98.19096 Y54.99332
G01 X98.34704 Y55.00869
G01 X98.44125 Y55.02743
G01 X98.59134 Y55.07295
G01 X98.68006 Y55.10973
G01 X98.81252 Y55.18052
G01 X98.81839 Y55.18364
G01 X98.89824 Y55.23701
G01 X99.01948 Y55.33650
G01 X99.08740 Y55.40442
G01 X99.17691 Y55.51349
G01 X99.18255 Y55.52924
G01 X99.21059 Y55.62146
G01 X99.24986 Y55.77828
G01 X99.26583 Y55.85842
G01 X99.28910 Y56.01524
G01 X99.29634 Y56.08854
G01 X99.30406 Y56.24536
G01 X99.30406 Y56.31661
G01 X99.29634 Y56.47343
G01 X99.28910 Y56.54668
G01 X99.26583 Y56.70353
G01 X99.25819 Y56.74706
G01 X99.23708 Y56.77688
G01 X99.14264 Y56.90421
G01 X99.09570 Y56.96144
G01 X98.99024 Y57.07780
G01 X98.93975 Y57.12829
G01 X98.82339 Y57.23375
G01 X98.76616 Y57.28069
G01 X98.63883 Y57.37513
G01 X98.57058 Y57.42067
G01 X98.43190 Y57.50381
G01 X98.34671 Y57.54925
G01 X98.33599 Y57.55433
G01 X97.66800 Y58.22232
G01 X97.66231 Y58.22232
G01 X97.66065 Y58.22316
G01 X97.65126 Y58.22806
G01 X97.59007 Y58.25923
G01 X97.33739 Y58.34361
G01 X97.27620 Y58.35328
G01 X97.16533 Y58.36207
G01 X97.09980 Y58.36207
G01 X97.06520 Y58.36121
G01 X97.04559 Y58.36024
G01 X96.90330 Y58.33881
G01 X96.89774 Y58.33418
G01 X96.85004 Y58.29415
G01 X96.82413 Y58.27134
G01 X96.77313 Y58.22425
G01 X96.76734 Y58.21884
G01 X96.76363 Y58.21536
G01 X96.65128 Y58.12555
G01 X96.61410 Y58.09779
G01 X96.59429 Y58.08671
G01 X96.45619 Y58.01244
G01 X96.44666 Y58.00741
G01 X96.39198 Y57.98719
G01 X96.36393 Y57.97815
G01 X96.35553 Y57.97538
G01 X96.24829 Y57.92961
G01 X96.24593 Y57.92839
G01 X96.19159 Y57.90254
G01 X96.17760 Y57.89654
G01 X96.02815 Y57.81417
G01 X95.97036 Y57.77508
G01 X95.95530 Y57.73665
G01 X95.93904 Y57.67767
G01 X95.92228 Y57.57668
G01 X95.92690 Y57.47442
G01 X95.95263 Y57.37533
G01 X95.97412 Y57.31806
G01 X96.00671 Y57.24841
G01 X96.04979 Y57.18468
G01 X96.18314 Y57.01745
G01 X96.25164 Y56.94729
G01 X96.28182 Y56.92202
G01 X96.35045 Y56.87389
G01 X96.37242 Y56.86352
G01 X96.85992 Y56.37605
G01 X96.85530 Y56.32898
G01 X96.85530 Y56.23294
G01 X96.85992 Y56.18593
G01 X96.61892 Y55.94491
G01 X96.37795 Y56.18590
G01 X96.38258 Y56.23294
G01 X96.38258 Y56.32898
G01 X96.36721 Y56.48506
G01 X96.34847 Y56.57927
G01 X96.30295 Y56.72936
G01 X96.26619 Y56.81808
G01 X96.19226 Y56.95641
G01 X96.13889 Y57.03627
G01 X96.03940 Y57.15750
G01 X95.97148 Y57.22542
G01 X95.85024 Y57.32491
G01 X95.78550 Y57.36817
G01 X95.77039 Y57.37828
G01 X95.63206 Y57.45222
G01 X95.54334 Y57.48897
G01 X95.39325 Y57.53449
G01 X95.29904 Y57.55324
G01 X95.14296 Y57.56860
G01 X95.04692 Y57.56860
G01 X94.99988 Y57.56398
G01 X94.94489 Y57.61897
G01 X94.97085 Y57.63266
G01 X95.02208 Y57.66614
G01 X95.08733 Y57.71930
G01 X95.10150 Y57.73083
G01 X95.16574 Y57.81061
G01 X95.21197 Y57.90200
G01 X95.23374 Y57.95918
G01 X95.24659 Y58.00764
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.97036 Y57.77508 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.97036 Y57.77508
G01 X95.96975 Y57.77467
G01 X95.93592 Y57.77467
G01 X95.77984 Y57.79004
G01 X95.68563 Y57.80878
G01 X95.53554 Y57.85430
G01 X95.44682 Y57.89106
G01 X95.30849 Y57.96499
G01 X95.24717 Y58.00596
G01 X95.24659 Y58.00764
G01 X95.23866 Y58.03060
G01 X95.16726 Y58.19080
G01 X95.14336 Y58.23309
G01 X95.12914 Y58.25941
G01 X95.11410 Y58.28857
G01 X95.05449 Y58.38506
G01 X95.04717 Y58.39502
G01 X95.00923 Y58.45245
G01 X94.97227 Y58.51485
G01 X94.93539 Y58.59080
G01 X94.90839 Y58.65412
G01 X94.89561 Y58.68872
G01 X94.86343 Y58.80439
G01 X94.85281 Y58.84797
G01 X94.84824 Y58.87162
G01 X94.84806 Y58.87279
G01 X94.83399 Y59.02781
G01 X94.83170 Y59.06233
G01 X94.83396 Y59.09682
G01 X94.84804 Y59.25186
G01 X94.84824 Y59.25300
G01 X94.86343 Y59.32026
G01 X94.89561 Y59.43593
G01 X94.90839 Y59.47053
G01 X94.93539 Y59.53385
G01 X94.96452 Y59.59385
G01 X94.97224 Y59.60977
G01 X95.00923 Y59.67220
G01 X95.04717 Y59.72963
G01 X95.05258 Y59.73700
G01 X95.07603 Y59.76898
G01 X95.13290 Y59.83436
G01 X95.14699 Y59.85061
G01 X95.19475 Y59.90035
G01 X95.20422 Y59.90931
G01 X95.31656 Y59.99910
G01 X95.35375 Y60.02686
G01 X95.37356 Y60.03794
G01 X95.51166 Y60.11221
G01 X95.51669 Y60.11490
G01 X95.57902 Y60.12704
G01 X95.73584 Y60.15031
G01 X95.79734 Y60.15638
G01 X95.95418 Y60.16410
G01 X96.01369 Y60.16410
G01 X96.17051 Y60.15638
G01 X96.23201 Y60.15031
G01 X96.38883 Y60.12704
G01 X96.45116 Y60.11490
G01 X96.45619 Y60.11221
G01 X96.59429 Y60.03794
G01 X96.61410 Y60.02686
G01 X96.65128 Y59.99910
G01 X96.76363 Y59.90929
G01 X96.76734 Y59.90581
G01 X96.77313 Y59.90040
G01 X96.79294 Y59.88211
G01 X96.80716 Y59.86857
G01 X96.82342 Y59.85272
G01 X96.90307 Y59.78536
G01 X96.92771 Y59.78104
G01 X96.98890 Y59.77137
G01 X97.09980 Y59.76258
G01 X98.01595 Y59.76258
G01 X98.05039 Y59.76174
G01 X98.08463 Y59.76004
G01 X98.11867 Y59.75501
G01 X98.16020 Y59.74754
G01 X98.18382 Y59.73400
G01 X98.24447 Y59.69763
G01 X98.29764 Y59.66217
G01 X98.35334 Y59.62085
G01 X98.39913 Y59.58328
G01 X98.45004 Y59.53715
G01 X98.47089 Y59.51729
G01 X100.47188 Y57.51630
G01 X100.49174 Y57.49545
G01 X100.53787 Y57.44455
G01 X100.57543 Y57.39875
G01 X100.61676 Y57.34305
G01 X100.62824 Y57.32705
G01 X100.63593 Y57.28496
G01 X100.64612 Y57.21636
G01 X100.65183 Y57.15837
G01 X100.65521 Y57.08974
G01 X100.65592 Y57.06131
G01 X100.65592 Y55.63330
G01 X100.65661 Y55.60485
G01 X100.66144 Y55.50686
G01 X100.66718 Y55.44864
G01 X100.68173 Y55.35060
G01 X100.69428 Y55.28766
G01 X100.71716 Y55.19629
G01 X100.71716 Y39.60333
G01 X100.71935 Y39.54811
G01 X100.72179 Y39.51713
G01 X100.75681 Y39.34357
G01 X100.77670 Y39.28238
G01 X100.85691 Y39.12975
G01 X100.87617 Y39.09312
G01 X100.95671 Y39.05726
G01 X101.01490 Y39.03834
G01 X101.08971 Y39.02035
G01 X101.16644 Y39.01431
G01 X101.49938 Y39.01431
G01 X101.44447 Y38.94883
G01 X101.40174 Y38.87481
G01 X101.37253 Y38.79450
G01 X101.35260 Y38.72000
G01 X101.34675 Y38.67550
G01 X101.33593 Y38.59330
G01 X101.33593 Y28.53998
G01 X101.39004 Y28.40940
G01 X101.41444 Y28.35543
G01 X101.43258 Y28.31857
G01 X101.51368 Y28.18751
G01 X101.56105 Y28.12579
G01 X101.62186 Y28.05639
G01 X101.69735 Y27.98090
G01 X101.73083 Y27.94954
G01 X101.76014 Y27.92383
G01 X101.87805 Y27.83960
G01 X101.94721 Y27.79968
G01 X102.16430 Y27.71154
G01 X102.16824 Y27.70996
G01 X102.17726 Y27.71156
G01 X102.25176 Y27.73155
G01 X102.33202 Y27.76076
G01 X102.39933 Y27.79960
G01 X102.44594 Y27.88380
G01 X102.47789 Y27.96091
G01 X102.53344 Y28.16452
G01 X102.54360 Y28.24166
G01 X102.54967 Y28.33389
G01 X102.54967 Y28.94783
G01 X102.55084 Y28.98850
G01 X102.55290 Y29.00600
G01 X102.57936 Y29.09213
G01 X102.62321 Y29.16462
G01 X102.68312 Y29.22454
G01 X102.75564 Y29.26838
G01 X102.84180 Y29.29487
G01 X102.85925 Y29.29693
G01 X102.89994 Y29.29807
G01 X104.49993 Y29.29807
G01 X104.54057 Y29.29693
G01 X104.55808 Y29.29485
G01 X104.64423 Y29.26838
G01 X104.69196 Y29.24087
G01 X104.71670 Y29.22456
G01 X104.77664 Y29.16462
G01 X104.82048 Y29.09213
G01 X104.84695 Y29.00600
G01 X104.84901 Y28.98850
G01 X104.85018 Y28.94783
G01 X104.85018 Y27.34781
G01 X104.84901 Y27.30717
G01 X104.84695 Y27.28967
G01 X104.82048 Y27.20354
G01 X104.77667 Y27.13105
G01 X104.71670 Y27.07113
G01 X104.64421 Y27.02726
G01 X104.55805 Y27.00079
G01 X104.54052 Y26.99874
G01 X104.49993 Y26.99757
G01 X103.88597 Y26.99757
G01 X103.84045 Y26.99610
G01 X103.80159 Y26.99356
G01 X103.65828 Y26.96970
G01 X103.58114 Y26.94903
G01 X103.36537 Y26.85782
G01 X103.36148 Y26.85617
G01 X103.35625 Y26.84872
G01 X103.31769 Y26.78192
G01 X103.28160 Y26.70450
G01 X103.26148 Y26.62942
G01 X103.26753 Y26.60834
G01 X103.28805 Y26.53691
G01 X103.32000 Y26.45977
G01 X103.42463 Y26.27656
G01 X103.47200 Y26.21484
G01 X103.53293 Y26.14532
G01 X104.65825 Y25.02000
G01 X104.68200 Y24.99506
G01 X104.71690 Y24.95653
G01 X104.77509 Y24.88127
G01 X104.81449 Y24.82467
G01 X104.81911 Y24.81728
G01 X104.88312 Y24.69465
G01 X104.89833 Y24.66371
G01 X104.90946 Y24.63110
G01 X104.93560 Y24.54784
G01 X104.94449 Y24.48805
G01 X104.95106 Y24.42130
G01 X104.95828 Y24.27428
G01 X104.95909 Y24.24197
G01 X104.95909 Y14.61781
G01 X104.99158 Y14.54908
G01 X105.01477 Y14.49330
G01 X105.07088 Y14.33646
G01 X105.08342 Y14.29518
G01 X105.12272 Y14.13836
G01 X105.12904 Y14.10659
G01 X105.15231 Y13.94977
G01 X105.15490 Y13.92345
G01 X105.16262 Y13.76661
G01 X105.16262 Y13.74205
G01 X105.15490 Y13.58520
G01 X105.15231 Y13.55889
G01 X105.12904 Y13.40207
G01 X105.12272 Y13.37029
G01 X105.08342 Y13.21347
G01 X105.07088 Y13.17220
G01 X105.01477 Y13.01535
G01 X104.99158 Y12.95957
G01 X104.93603 Y12.84212
G01 X104.90527 Y12.81754
G01 X104.86808 Y12.78980
G01 X104.84832 Y12.77875
G01 X104.71020 Y12.70446
G01 X104.70067 Y12.69940
G01 X104.64598 Y12.67921
G01 X104.52048 Y12.63864
G01 X104.49615 Y12.63295
G01 X104.42838 Y12.62056
G01 X104.33290 Y12.60788
G01 X104.27233 Y12.60491
G01 X104.20352 Y12.60491
G01 X104.14294 Y12.60788
G01 X104.04748 Y12.62053
G01 X103.99608 Y12.62932
G01 X103.97974 Y12.63293
G01 X103.95538 Y12.63864
G01 X103.82988 Y12.67921
G01 X103.82899 Y12.67949
G01 X103.77520 Y12.69943
G01 X103.76565 Y12.70446
G01 X103.62752 Y12.77875
G01 X103.60776 Y12.78977
G01 X103.57057 Y12.81754
G01 X103.45823 Y12.90735
G01 X103.44873 Y12.91632
G01 X103.40100 Y12.96605
G01 X103.33004 Y13.04769
G01 X103.30118 Y13.08700
G01 X103.26326 Y13.14441
G01 X103.23771 Y13.18754
G01 X103.22902 Y13.20181
G01 X103.21596 Y13.21670
G01 X103.19534 Y13.23958
G01 X103.17035 Y13.26592
G01 X103.10225 Y13.33399
G01 X103.07850 Y13.35896
G01 X103.04355 Y13.39752
G01 X102.98541 Y13.47278
G01 X102.94601 Y13.52932
G01 X102.94147 Y13.53658
G01 X102.91696 Y13.58357
G01 X102.88848 Y13.63811
G01 X102.87741 Y13.65937
G01 X102.86219 Y13.69031
G01 X102.85107 Y13.72292
G01 X102.80959 Y13.85492
G01 X102.80763 Y13.86341
G01 X102.79552 Y13.93130
G01 X102.78340 Y14.02564
G01 X102.78086 Y14.07758
G01 X102.78002 Y14.11197
G01 X102.78002 Y23.57944
G01 X102.77850 Y23.62539
G01 X102.77596 Y23.66430
G01 X102.75940 Y23.77774
G01 X102.74210 Y23.80121
G01 X102.69473 Y23.86293
G01 X102.63380 Y23.93247
G01 X102.32796 Y24.23832
G01 X102.29438 Y24.26976
G01 X102.26507 Y24.29544
G01 X102.14731 Y24.37957
G01 X102.07815 Y24.41947
G01 X101.86103 Y24.50763
G01 X101.42694 Y24.94169
G01 X101.36428 Y25.09303
G01 X101.35006 Y25.12549
G01 X101.34312 Y25.14055
G01 X101.26425 Y25.27591
G01 X101.22783 Y25.32602
G01 X101.15559 Y25.41068
G01 X99.43972 Y27.12655
G01 X99.39123 Y27.17072
G01 X99.38605 Y27.17499
G01 X99.36060 Y27.19655
G01 X99.35892 Y27.19734
G01 X99.33601 Y27.20786
G01 X99.33228 Y27.20961
G01 X99.33203 Y27.20968
G01 X99.29626 Y27.22767
G01 X99.15816 Y27.30191
G01 X99.13835 Y27.31299
G01 X99.10116 Y27.34075
G01 X98.98882 Y27.43054
G01 X98.97935 Y27.43950
G01 X98.93159 Y27.48924
G01 X98.86063 Y27.57090
G01 X98.83177 Y27.61022
G01 X98.79382 Y27.66765
G01 X98.75687 Y27.73010
G01 X98.71999 Y27.80600
G01 X98.69299 Y27.86937
G01 X98.68021 Y27.90392
G01 X98.64742 Y28.02177
G01 X98.63284 Y28.08682
G01 X98.63266 Y28.08797
G01 X98.61859 Y28.24303
G01 X98.61630 Y28.27755
G01 X98.61856 Y28.31202
G01 X98.63266 Y28.46706
G01 X98.63284 Y28.46820
G01 X98.64803 Y28.53546
G01 X98.68021 Y28.65118
G01 X98.69299 Y28.68573
G01 X98.71999 Y28.74905
G01 X98.75687 Y28.82502
G01 X98.79382 Y28.88740
G01 X98.80973 Y28.91301
G01 X98.83177 Y28.94483
G01 X98.86063 Y28.98415
G01 X98.93159 Y29.06581
G01 X98.97935 Y29.11555
G01 X98.98882 Y29.12451
G01 X99.10116 Y29.21430
G01 X99.14490 Y29.24659
G01 X99.15720 Y29.25497
G01 X99.18608 Y29.27564
G01 X99.20848 Y29.29256
G01 X99.28138 Y29.35527
G01 X99.28252 Y29.35636
G01 X99.29817 Y29.43084
G01 X99.30787 Y29.49203
G01 X99.31668 Y29.60305
G01 X99.31668 Y34.30495
G01 X99.31305 Y34.37609
G01 X99.30901 Y34.41589
G01 X99.26258 Y34.61033
G01 X99.23959 Y34.67152
G01 X99.17693 Y34.80174
G01 X99.17607 Y34.80355
G01 X99.14247 Y34.82354
G01 X99.00901 Y34.78981
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.14247 Y34.82354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.14247 Y34.82354
G01 X99.14247 Y34.82356
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.17693 Y34.80174 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.17693 Y34.80174
G01 X99.17693 Y34.91922
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.80793 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.80793 Y33.57716
G01 X95.80793 Y33.60591
G01 X95.88039 Y33.54681
G01 X95.94598 Y33.46639
G01 X95.99398 Y33.37449
G01 X96.02337 Y33.27175
G01 X96.02792 Y33.22057
G01 X96.02792 Y33.12433
G01 X96.00793 Y33.12433
G01 X96.00793 Y33.18432
G01 X95.99853 Y33.27990
G01 X95.97064 Y33.37183
G01 X95.92535 Y33.45653
G01 X95.86442 Y33.53080
G01 X95.80793 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X101.33593 Y28.53998 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X101.33593 Y28.53998
G01 X100.85691 Y29.01895
G01 X100.85691 Y39.12975
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X105.39577 Y41.48934 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X105.39577 Y41.48934
G01 X105.39793 Y41.45487
G01 X105.41238 Y41.28804
G01 X105.41698 Y41.25977
G01 X105.43138 Y41.19233
G01 X105.45815 Y41.09150
G01 X105.48827 Y41.00475
G01 X105.51400 Y40.94095
G01 X105.53133 Y40.90346
G01 X105.56630 Y40.84049
G01 X105.60654 Y40.76810
G01 X105.63079 Y40.72769
G01 X105.64433 Y40.71042
G01 X105.75757 Y40.57044
G01 X105.76854 Y40.55878
G01 X105.81819 Y40.51095
G01 X105.90633 Y40.43402
G01 X105.96971 Y40.38654
G01 X106.02678 Y40.34804
G01 X106.07291 Y40.32010
G01 X106.19970 Y40.25571
G01 X106.25406 Y40.23097
G01 X106.26295 Y40.22817
G01 X106.44723 Y40.17181
G01 X106.45048 Y40.17108
G01 X106.51840 Y40.15921
G01 X106.64705 Y40.14319
G01 X106.71349 Y40.13991
G01 X106.78235 Y40.13991
G01 X106.84880 Y40.14319
G01 X106.97745 Y40.15921
G01 X107.04537 Y40.17108
G01 X107.04862 Y40.17181
G01 X107.23290 Y40.22817
G01 X107.24179 Y40.23097
G01 X107.29614 Y40.25571
G01 X107.42294 Y40.32010
G01 X107.46907 Y40.34804
G01 X107.52614 Y40.38654
G01 X107.58951 Y40.43402
G01 X107.67765 Y40.51095
G01 X107.72731 Y40.55878
G01 X107.73828 Y40.57044
G01 X107.85152 Y40.71042
G01 X107.86505 Y40.72769
G01 X107.88931 Y40.76810
G01 X107.96452 Y40.90346
G01 X107.98184 Y40.94095
G01 X108.00757 Y41.00475
G01 X108.03770 Y41.09150
G01 X108.06447 Y41.19233
G01 X108.07887 Y41.25977
G01 X108.08347 Y41.28802
G01 X108.09792 Y41.45487
G01 X108.10005 Y41.48939
G01 X108.09792 Y41.52378
G01 X108.08347 Y41.69060
G01 X108.07887 Y41.71888
G01 X108.06447 Y41.78631
G01 X108.03854 Y41.88405
G01 X108.03770 Y41.88715
G01 X108.00757 Y41.97389
G01 X107.98184 Y42.03770
G01 X107.96452 Y42.07521
G01 X107.92827 Y42.14044
G01 X107.88931 Y42.21054
G01 X107.86505 Y42.25095
G01 X107.85152 Y42.26823
G01 X107.76429 Y42.37607
G01 X107.73831 Y42.40818
G01 X107.73536 Y42.41130
G01 X107.72731 Y42.41986
G01 X107.67765 Y42.46769
G01 X107.58951 Y42.54465
G01 X107.52614 Y42.59210
G01 X107.46907 Y42.63061
G01 X107.42297 Y42.65852
G01 X107.29614 Y42.72294
G01 X107.24179 Y42.74768
G01 X107.23295 Y42.75045
G01 X107.04862 Y42.80683
G01 X107.04542 Y42.80757
G01 X106.97740 Y42.81946
G01 X106.84880 Y42.83546
G01 X106.78230 Y42.83874
G01 X106.71354 Y42.83874
G01 X106.64705 Y42.83546
G01 X106.51845 Y42.81946
G01 X106.45043 Y42.80757
G01 X106.44720 Y42.80683
G01 X106.26290 Y42.75045
G01 X106.25406 Y42.74768
G01 X106.19970 Y42.72294
G01 X106.07291 Y42.65855
G01 X106.02678 Y42.63061
G01 X105.96971 Y42.59210
G01 X105.90633 Y42.54463
G01 X105.81819 Y42.46769
G01 X105.76854 Y42.41986
G01 X105.75757 Y42.40821
G01 X105.64433 Y42.26823
G01 X105.63079 Y42.25095
G01 X105.60654 Y42.21054
G01 X105.53133 Y42.07519
G01 X105.51400 Y42.03770
G01 X105.48827 Y41.97389
G01 X105.45815 Y41.88715
G01 X105.43138 Y41.78631
G01 X105.41698 Y41.71888
G01 X105.41238 Y41.69060
G01 X105.39793 Y41.52378
G01 X105.39577 Y41.48934
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X105.39767 Y45.48933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X105.39767 Y45.48933
G01 X105.39767 Y47.48935
G01 X105.39884 Y47.52999
G01 X105.40090 Y47.54746
G01 X105.42737 Y47.63360
G01 X105.47121 Y47.70614
G01 X105.53112 Y47.76606
G01 X105.60364 Y47.80990
G01 X105.68970 Y47.83636
G01 X105.70725 Y47.83840
G01 X105.74794 Y47.83959
G01 X107.74791 Y47.83959
G01 X107.78863 Y47.83840
G01 X107.80610 Y47.83636
G01 X107.89063 Y47.81048
G01 X107.89223 Y47.80987
G01 X107.95309 Y47.77390
G01 X107.96470 Y47.76608
G01 X108.02464 Y47.70614
G01 X108.06848 Y47.63360
G01 X108.09495 Y47.54746
G01 X108.09701 Y47.52999
G01 X108.09818 Y47.48935
G01 X108.09818 Y45.48933
G01 X108.09701 Y45.44866
G01 X108.09495 Y45.43119
G01 X108.06848 Y45.34506
G01 X108.02464 Y45.27251
G01 X107.96472 Y45.21259
G01 X107.89221 Y45.16875
G01 X107.80610 Y45.14229
G01 X107.78863 Y45.14026
G01 X107.74791 Y45.13909
G01 X105.74794 Y45.13909
G01 X105.70722 Y45.14026
G01 X105.68975 Y45.14229
G01 X105.60364 Y45.16875
G01 X105.53112 Y45.21259
G01 X105.47118 Y45.27254
G01 X105.44804 Y45.30835
G01 X105.42737 Y45.34506
G01 X105.40090 Y45.43119
G01 X105.39884 Y45.44866
G01 X105.39767 Y45.48933
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.07147 Y48.54929 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.07147 Y48.54929
G01 X114.03857 Y48.52158
G01 X114.01086 Y48.49742
G01 X113.94200 Y48.43527
G01 X113.86847 Y48.35986
G01 X113.83144 Y48.31655
G01 X113.81696 Y48.30009
G01 X113.78376 Y48.26346
G01 X113.76331 Y48.23992
G01 X113.68084 Y48.14505
G01 X113.63311 Y48.09532
G01 X113.62362 Y48.08632
G01 X113.51127 Y47.99654
G01 X113.47409 Y47.96880
G01 X113.45432 Y47.95775
G01 X113.31620 Y47.88346
G01 X113.30665 Y47.87840
G01 X113.25199 Y47.85821
G01 X113.12649 Y47.81764
G01 X113.10215 Y47.81195
G01 X113.03439 Y47.79956
G01 X112.93891 Y47.78688
G01 X112.87833 Y47.78391
G01 X112.80952 Y47.78391
G01 X112.74894 Y47.78688
G01 X112.65346 Y47.79956
G01 X112.60208 Y47.80832
G01 X112.58569 Y47.81193
G01 X112.56139 Y47.81762
G01 X112.43586 Y47.85821
G01 X112.38117 Y47.87843
G01 X112.37165 Y47.88346
G01 X112.23352 Y47.95775
G01 X112.21374 Y47.96880
G01 X112.17658 Y47.99654
G01 X112.06431 Y48.08627
G01 X112.06362 Y48.08693
G01 X112.05476 Y48.09532
G01 X112.00701 Y48.14505
G01 X111.93604 Y48.22671
G01 X111.90718 Y48.26600
G01 X111.86926 Y48.32341
G01 X111.83228 Y48.38584
G01 X111.79540 Y48.46176
G01 X111.76837 Y48.52514
G01 X111.75560 Y48.55970
G01 X111.72466 Y48.67093
G01 X111.72344 Y48.67538
G01 X111.70823 Y48.74269
G01 X111.70805 Y48.74378
G01 X111.69398 Y48.89887
G01 X111.69172 Y48.93331
G01 X111.69398 Y48.96778
G01 X111.70805 Y49.12287
G01 X111.70823 Y49.12397
G01 X111.72344 Y49.19128
G01 X111.75560 Y49.30695
G01 X111.76837 Y49.34152
G01 X111.79540 Y49.40489
G01 X111.83228 Y49.48081
G01 X111.86926 Y49.54324
G01 X111.90718 Y49.60065
G01 X111.93604 Y49.63997
G01 X112.00701 Y49.72160
G01 X112.05473 Y49.77134
G01 X112.06423 Y49.78033
G01 X112.17658 Y49.87012
G01 X112.21374 Y49.89785
G01 X112.23352 Y49.90890
G01 X112.37165 Y49.98320
G01 X112.38117 Y49.98823
G01 X112.43586 Y50.00844
G01 X112.56139 Y50.04901
G01 X112.58569 Y50.05470
G01 X112.65346 Y50.06709
G01 X112.75247 Y50.08022
G01 X112.77835 Y50.08271
G01 X112.80916 Y50.08627
G01 X112.81699 Y50.08713
G01 X112.87940 Y50.09361
G01 X112.92367 Y50.09955
G01 X112.95384 Y50.12153
G01 X113.01556 Y50.16887
G01 X113.08511 Y50.22983
G01 X115.10443 Y52.24916
G01 X115.13575 Y52.28258
G01 X115.16146 Y52.31189
G01 X115.23006 Y52.40392
G01 X115.23446 Y52.43282
G01 X115.24459 Y52.50994
G01 X115.25069 Y52.60217
G01 X115.25069 Y52.75883
G01 X115.24962 Y52.79749
G01 X115.24779 Y52.83028
G01 X115.22755 Y52.96467
G01 X115.22592 Y52.97130
G01 X115.18053 Y53.02711
G01 X115.16001 Y53.05121
G01 X115.11909 Y53.09726
G01 X115.11401 Y53.10305
G01 X115.04304 Y53.18466
G01 X115.01419 Y53.22401
G01 X114.97627 Y53.28141
G01 X114.93926 Y53.34387
G01 X114.90240 Y53.41977
G01 X114.87538 Y53.48314
G01 X114.86260 Y53.51768
G01 X114.83042 Y53.63338
G01 X114.81523 Y53.70069
G01 X114.81505 Y53.70176
G01 X114.80098 Y53.85687
G01 X114.79872 Y53.89132
G01 X114.80098 Y53.92578
G01 X114.81505 Y54.08088
G01 X114.81523 Y54.08194
G01 X114.83042 Y54.14925
G01 X114.86260 Y54.26495
G01 X114.87538 Y54.29952
G01 X114.90240 Y54.36289
G01 X114.93926 Y54.43881
G01 X114.97627 Y54.50125
G01 X115.01419 Y54.55865
G01 X115.04304 Y54.59797
G01 X115.11401 Y54.67961
G01 X115.16174 Y54.72936
G01 X115.17121 Y54.73831
G01 X115.28358 Y54.82812
G01 X115.32074 Y54.85586
G01 X115.34058 Y54.86693
G01 X115.47868 Y54.94120
G01 X115.48818 Y54.94623
G01 X115.54281 Y54.96642
G01 X115.66839 Y55.00701
G01 X115.69265 Y55.01270
G01 X115.76047 Y55.02510
G01 X115.85594 Y55.03777
G01 X115.91652 Y55.04074
G01 X115.98533 Y55.04074
G01 X116.04591 Y55.03777
G01 X116.14136 Y55.02510
G01 X116.20916 Y55.01270
G01 X116.23344 Y55.00701
G01 X116.35902 Y54.96642
G01 X116.41365 Y54.94623
G01 X116.42318 Y54.94120
G01 X116.56128 Y54.86693
G01 X116.58109 Y54.85586
G01 X116.61827 Y54.82812
G01 X116.73062 Y54.73831
G01 X116.74012 Y54.72934
G01 X116.78785 Y54.67961
G01 X116.85881 Y54.59797
G01 X116.88767 Y54.55865
G01 X116.92561 Y54.50120
G01 X116.96257 Y54.43881
G01 X116.99945 Y54.36284
G01 X117.02645 Y54.29957
G01 X117.03923 Y54.26495
G01 X117.07141 Y54.14930
G01 X117.08663 Y54.08197
G01 X117.08680 Y54.08088
G01 X117.10088 Y53.92578
G01 X117.10314 Y53.89134
G01 X117.10088 Y53.85687
G01 X117.08680 Y53.70178
G01 X117.08663 Y53.70069
G01 X117.07141 Y53.63333
G01 X117.03923 Y53.51771
G01 X117.02645 Y53.48309
G01 X116.99945 Y53.41982
G01 X116.96257 Y53.34385
G01 X116.92561 Y53.28146
G01 X116.88767 Y53.22401
G01 X116.85884 Y53.18471
G01 X116.79590 Y53.11232
G01 X116.78785 Y53.10305
G01 X116.78264 Y53.09714
G01 X116.75709 Y53.06838
G01 X116.74159 Y53.05149
G01 X116.73466 Y53.04420
G01 X116.67449 Y52.97194
G01 X116.66740 Y52.92820
G01 X116.65724 Y52.85106
G01 X116.65117 Y52.75883
G01 X116.65117 Y52.10532
G01 X116.65033 Y52.07087
G01 X116.64863 Y52.03658
G01 X116.64360 Y52.00260
G01 X116.63019 Y51.93516
G01 X116.62798 Y51.92637
G01 X116.62183 Y51.90179
G01 X116.61027 Y51.86950
G01 X116.58393 Y51.80590
G01 X116.56923 Y51.77484
G01 X116.55160 Y51.74540
G01 X116.51332 Y51.68812
G01 X116.49288 Y51.66054
G01 X116.46979 Y51.63509
G01 X116.44606 Y51.61017
G01 X115.64794 Y50.81205
G01 X115.33174 Y50.49587
G01 X115.30029 Y50.46229
G01 X115.27459 Y50.43298
G01 X115.19049 Y50.31520
G01 X115.15056 Y50.24606
G01 X115.06087 Y50.02503
G01 X115.06247 Y50.01599
G01 X115.08244 Y49.94149
G01 X115.11165 Y49.86123
G01 X115.15435 Y49.78726
G01 X115.20924 Y49.72183
G01 X115.26377 Y49.66730
G01 X115.26621 Y49.66514
G01 X115.36910 Y49.65005
G01 X115.51025 Y49.64058
G01 X115.53573 Y49.64101
G01 X115.58993 Y49.63999
G01 X115.61030 Y49.63887
G01 X115.68475 Y49.63867
G01 X115.76753 Y49.64274
G01 X115.83634 Y49.64274
G01 X115.89217 Y49.63999
G01 X115.99237 Y49.62711
G01 X116.06021 Y49.61500
G01 X116.07065 Y49.61261
G01 X116.21010 Y49.56882
G01 X116.24279 Y49.55767
G01 X116.27380 Y49.54243
G01 X116.40337 Y49.47479
G01 X116.41243 Y49.46910
G01 X116.46897 Y49.42973
G01 X116.54891 Y49.36796
G01 X116.59033 Y49.33042
G01 X116.63903 Y49.28173
G01 X116.68038 Y49.23608
G01 X116.70039 Y49.21304
G01 X116.73174 Y49.17845
G01 X116.74413 Y49.16511
G01 X116.79422 Y49.11259
G01 X116.84380 Y49.06496
G01 X116.90547 Y49.01048
G01 X116.91706 Y49.00045
G01 X116.99214 Y48.93639
G01 X117.01759 Y48.91647
G01 X117.05546 Y48.79163
G01 X117.07194 Y48.70880
G01 X117.07194 Y47.47777
G01 X117.08840 Y47.39501
G01 X117.13392 Y47.24492
G01 X117.17070 Y47.15618
G01 X117.24461 Y47.01787
G01 X117.29798 Y46.93802
G01 X117.39747 Y46.81678
G01 X117.46539 Y46.74886
G01 X117.58662 Y46.64937
G01 X117.66651 Y46.59601
G01 X117.80481 Y46.52207
G01 X117.89356 Y46.48531
G01 X118.04362 Y46.43980
G01 X118.13783 Y46.42105
G01 X118.29391 Y46.40568
G01 X118.38998 Y46.40568
G01 X118.54603 Y46.42105
G01 X118.64024 Y46.43980
G01 X118.79033 Y46.48531
G01 X118.87908 Y46.52207
G01 X119.01738 Y46.59601
G01 X119.09724 Y46.64937
G01 X119.21847 Y46.74886
G01 X119.28639 Y46.81678
G01 X119.36694 Y46.91490
G01 X119.38588 Y46.93802
G01 X119.43925 Y47.01787
G01 X119.51319 Y47.15618
G01 X119.54994 Y47.24492
G01 X119.59546 Y47.39501
G01 X119.61194 Y47.47777
G01 X119.61194 Y48.70880
G01 X119.62840 Y48.79163
G01 X119.66701 Y48.91891
G01 X119.67237 Y48.92328
G01 X119.68845 Y48.93728
G01 X119.74141 Y48.98056
G01 X119.76724 Y49.00027
G01 X119.88886 Y49.11307
G01 X119.90376 Y49.13006
G01 X119.93803 Y49.16651
G01 X119.95766 Y49.18602
G01 X120.00346 Y49.23608
G01 X120.04484 Y49.28175
G01 X120.09348 Y49.33039
G01 X120.13490 Y49.36793
G01 X120.21484 Y49.42971
G01 X120.27143 Y49.46913
G01 X120.28047 Y49.47479
G01 X120.41009 Y49.54243
G01 X120.44108 Y49.55767
G01 X120.47377 Y49.56882
G01 X120.61319 Y49.61261
G01 X120.62363 Y49.61500
G01 X120.69147 Y49.62711
G01 X120.79167 Y49.63999
G01 X120.84753 Y49.64274
G01 X120.91634 Y49.64274
G01 X120.97217 Y49.63999
G01 X121.07237 Y49.62711
G01 X121.14021 Y49.61500
G01 X121.15065 Y49.61261
G01 X121.29010 Y49.56882
G01 X121.32279 Y49.55767
G01 X121.35380 Y49.54243
G01 X121.48337 Y49.47479
G01 X121.49243 Y49.46910
G01 X121.54897 Y49.42973
G01 X121.63467 Y49.36349
G01 X121.64412 Y49.35622
G01 X121.67374 Y49.33453
G01 X121.71715 Y49.30446
G01 X121.73297 Y49.29318
G01 X121.77836 Y49.25996
G01 X121.86929 Y49.20217
G01 X121.95428 Y49.15539
G01 X121.98319 Y49.13999
G01 X121.99893 Y49.13192
G01 X122.06099 Y49.14009
G01 X122.14432 Y49.15859
G01 X122.22319 Y49.19125
G01 X122.29517 Y49.23710
G01 X122.35636 Y49.28404
G01 X122.41041 Y49.33801
G01 X122.41222 Y49.33621
G01 X122.55634 Y49.48035
G01 X122.58192 Y49.49999
G01 X122.58192 Y49.46775
G01 X122.54539 Y49.43778
G01 X122.47747 Y49.36986
G01 X122.37798 Y49.24863
G01 X122.34732 Y49.20273
G01 X122.32461 Y49.16875
G01 X122.25070 Y49.03044
G01 X122.21392 Y48.94170
G01 X122.16840 Y48.79163
G01 X122.15192 Y48.70880
G01 X122.15192 Y47.47777
G01 X122.13546 Y47.39501
G01 X122.08994 Y47.24492
G01 X122.05319 Y47.15618
G01 X121.97925 Y47.01787
G01 X121.92588 Y46.93802
G01 X121.90694 Y46.91490
G01 X121.82639 Y46.81678
G01 X121.75847 Y46.74886
G01 X121.63724 Y46.64937
G01 X121.55738 Y46.59601
G01 X121.41908 Y46.52207
G01 X121.33033 Y46.48531
G01 X121.18024 Y46.43980
G01 X121.08603 Y46.42105
G01 X120.92998 Y46.40568
G01 X120.83391 Y46.40568
G01 X120.67783 Y46.42105
G01 X120.58362 Y46.43980
G01 X120.43356 Y46.48531
G01 X120.34481 Y46.52207
G01 X120.20651 Y46.59601
G01 X120.12662 Y46.64937
G01 X120.00539 Y46.74886
G01 X119.93747 Y46.81678
G01 X119.83798 Y46.93802
G01 X119.78461 Y47.01787
G01 X119.71070 Y47.15618
G01 X119.67392 Y47.24492
G01 X119.62840 Y47.39501
G01 X119.61194 Y47.47777
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.12701 Y48.91891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.12701 Y48.91891
G01 X117.08840 Y48.79163
G01 X117.07194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.07194 Y47.47777 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.07194 Y47.47777
G01 X117.05546 Y47.39501
G01 X117.04192 Y47.35039
G01 X117.04192 Y46.70695
G01 X117.67055 Y46.07830
G01 X128.04731 Y46.07830
G01 X128.38175 Y46.41277
G01 X128.45729 Y46.43982
G01 X128.54309 Y46.47525
G01 X128.69366 Y46.54648
G01 X128.75754 Y46.58056
G01 X128.89623 Y46.66370
G01 X128.94571 Y46.69672
G01 X129.07304 Y46.79115
G01 X129.11358 Y46.82440
G01 X129.22993 Y46.92986
G01 X129.26539 Y46.96532
G01 X129.37085 Y47.08168
G01 X129.40410 Y47.12222
G01 X129.49854 Y47.24955
G01 X129.53156 Y47.29900
G01 X129.61467 Y47.43766
G01 X129.64878 Y47.50159
G01 X129.72000 Y47.65216
G01 X129.73824 Y47.69331
G01 X129.77194 Y47.77469
G01 X129.77194 Y48.70880
G01 X129.78840 Y48.79163
G01 X129.82701 Y48.91891
G01 X129.83237 Y48.92328
G01 X129.84845 Y48.93728
G01 X129.90141 Y48.98056
G01 X129.92724 Y49.00027
G01 X130.04886 Y49.11307
G01 X130.06376 Y49.13006
G01 X130.09803 Y49.16651
G01 X130.11766 Y49.18602
G01 X130.16346 Y49.23608
G01 X130.20484 Y49.28175
G01 X130.25348 Y49.33039
G01 X130.29490 Y49.36793
G01 X130.37484 Y49.42971
G01 X130.43143 Y49.46913
G01 X130.44047 Y49.47479
G01 X130.57009 Y49.54243
G01 X130.60108 Y49.55767
G01 X130.63377 Y49.56882
G01 X130.77319 Y49.61261
G01 X130.78363 Y49.61500
G01 X130.85147 Y49.62711
G01 X130.95167 Y49.63999
G01 X131.00753 Y49.64274
G01 X131.07634 Y49.64274
G01 X131.13217 Y49.63999
G01 X131.23237 Y49.62711
G01 X131.30021 Y49.61500
G01 X131.31065 Y49.61261
G01 X131.45010 Y49.56882
G01 X131.48279 Y49.55767
G01 X131.51380 Y49.54243
G01 X131.64337 Y49.47479
G01 X131.65243 Y49.46910
G01 X131.70897 Y49.42973
G01 X131.78891 Y49.36796
G01 X131.83033 Y49.33042
G01 X131.87903 Y49.28173
G01 X131.92038 Y49.23608
G01 X131.94039 Y49.21304
G01 X131.97174 Y49.17845
G01 X131.98413 Y49.16511
G01 X132.03422 Y49.11259
G01 X132.08380 Y49.06496
G01 X132.14547 Y49.01048
G01 X132.15706 Y49.00045
G01 X132.23214 Y48.93639
G01 X132.25759 Y48.91647
G01 X132.29546 Y48.79163
G01 X132.31194 Y48.70880
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X132.36701 Y48.91891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X132.36701 Y48.91891
G01 X132.28776 Y48.91350
G01 X132.25731 Y48.91670
G01 X132.23214 Y48.93639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.82701 Y48.91891 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.82701 Y48.91891
G01 X129.74776 Y48.91350
G01 X129.71731 Y48.91670
G01 X129.69214 Y48.93639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.77194 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.77194 Y48.70880
G01 X129.75546 Y48.79163
G01 X129.71759 Y48.91647
G01 X129.69214 Y48.93639
G01 X129.61706 Y49.00045
G01 X129.60547 Y49.01048
G01 X129.54380 Y49.06496
G01 X129.49422 Y49.11259
G01 X129.44413 Y49.16511
G01 X129.43174 Y49.17845
G01 X129.40039 Y49.21304
G01 X129.38038 Y49.23608
G01 X129.33903 Y49.28173
G01 X129.29033 Y49.33042
G01 X129.24891 Y49.36796
G01 X129.16897 Y49.42973
G01 X129.11243 Y49.46910
G01 X129.10337 Y49.47479
G01 X128.97380 Y49.54243
G01 X128.94279 Y49.55767
G01 X128.91010 Y49.56882
G01 X128.77065 Y49.61261
G01 X128.76021 Y49.61500
G01 X128.69237 Y49.62711
G01 X128.59217 Y49.63999
G01 X128.53634 Y49.64274
G01 X128.46753 Y49.64274
G01 X128.41167 Y49.63999
G01 X128.31147 Y49.62711
G01 X128.24363 Y49.61500
G01 X128.23319 Y49.61261
G01 X128.09377 Y49.56882
G01 X128.06108 Y49.55767
G01 X128.03009 Y49.54243
G01 X127.90047 Y49.47479
G01 X127.89143 Y49.46913
G01 X127.83484 Y49.42971
G01 X127.75490 Y49.36793
G01 X127.71348 Y49.33039
G01 X127.66484 Y49.28175
G01 X127.62346 Y49.23608
G01 X127.57766 Y49.18602
G01 X127.55803 Y49.16651
G01 X127.52376 Y49.13006
G01 X127.50886 Y49.11307
G01 X127.38724 Y49.00027
G01 X127.36141 Y48.98056
G01 X127.30845 Y48.93728
G01 X127.29237 Y48.92328
G01 X127.28701 Y48.91891
G01 X127.20776 Y48.91350
G01 X127.17731 Y48.91670
G01 X127.15214 Y48.93639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X127.23192 Y48.70880 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X127.23192 Y48.70880
G01 X127.24840 Y48.79163
G01 X127.28701 Y48.91891
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.69292 Y57.65611 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.69292 Y57.65611
G01 X131.69292 Y57.68679
G01 X131.71936 Y57.70447
G01 X131.87090 Y57.82883
G01 X131.93882 Y57.89674
G01 X132.06318 Y58.04828
G01 X132.11654 Y58.12816
G01 X132.20895 Y58.30104
G01 X132.23948 Y58.37472
G01 X132.26366 Y58.37472
G01 X132.21012 Y58.24544
G01 X132.11113 Y58.07401
G01 X131.99063 Y57.91699
G01 X131.85068 Y57.77703
G01 X131.69361 Y57.65651
G01 X131.69292 Y57.65611
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X128.79999 Y58.56878 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X128.79999 Y58.56878
G01 X128.80316 Y58.56962
G01 X128.88729 Y58.58445
G01 X128.97271 Y58.58445
G01 X129.05683 Y58.56962
G01 X129.13133 Y58.54965
G01 X129.14180 Y58.54587
G01 X129.21154 Y58.52047
G01 X129.28548 Y58.47780
G01 X129.35089 Y58.42293
G01 X129.40545 Y58.36840
G01 X129.48343 Y58.26680
G01 X129.59470 Y58.07401
G01 X129.71520 Y57.91699
G01 X129.85518 Y57.77701
G01 X130.01220 Y57.65651
G01 X130.01291 Y57.65611
G01 X130.01291 Y57.68681
G01 X129.98652 Y57.70447
G01 X129.83499 Y57.82883
G01 X129.76707 Y57.89674
G01 X129.64268 Y58.04828
G01 X129.58932 Y58.12816
G01 X129.49691 Y58.30104
G01 X129.46016 Y58.38978
G01 X129.40326 Y58.57739
G01 X129.38452 Y58.67160
G01 X129.36529 Y58.86669
G01 X129.36293 Y58.91470
G01 X129.36293 Y59.51472
G01 X129.36529 Y59.56273
G01 X129.38452 Y59.75783
G01 X129.40326 Y59.85204
G01 X129.46016 Y60.03964
G01 X129.49691 Y60.12839
G01 X129.58932 Y60.30126
G01 X129.64268 Y60.38114
G01 X129.76707 Y60.53268
G01 X129.83499 Y60.60060
G01 X129.98652 Y60.72496
G01 X130.01291 Y60.74261
G01 X130.01291 Y60.77335
G01 X130.01220 Y60.77294
G01 X129.85518 Y60.65244
G01 X129.71520 Y60.51246
G01 X129.59470 Y60.35544
G01 X129.48343 Y60.16265
G01 X129.40545 Y60.06105
G01 X129.35089 Y60.00652
G01 X129.28548 Y59.95166
G01 X129.21154 Y59.90898
G01 X129.13133 Y59.87980
G01 X129.05683 Y59.85983
G01 X128.97271 Y59.84500
G01 X128.88729 Y59.84500
G01 X128.80316 Y59.85983
G01 X128.79999 Y59.86067
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.86512 Y58.88765 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.86512 Y58.88765
G01 X125.80728 Y58.91160
G01 X125.72384 Y58.93009
G01 X125.64737 Y58.94015
G01 X125.56205 Y58.94386
G01 X125.47739 Y58.93271
G01 X125.39593 Y58.90703
G01 X125.34142 Y58.88445
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.86441 Y59.54500 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.86441 Y59.54500
G01 X125.86294 Y59.51472
G01 X125.86294 Y58.91470
G01 X125.86421 Y58.88902
G01 X125.86512 Y58.88765
G01 X125.87851 Y58.86794
G01 X125.92600 Y58.79093
G01 X125.96685 Y58.71744
G01 X125.98569 Y58.68155
G01 X126.01975 Y58.61277
G01 X126.03555 Y58.57871
G01 X126.05112 Y58.54279
G01 X126.06827 Y58.49944
G01 X126.09306 Y58.43014
G01 X126.10279 Y58.40457
G01 X126.11940 Y58.36652
G01 X126.14246 Y58.31778
G01 X126.21152 Y58.19349
G01 X126.22903 Y58.16378
G01 X126.24980 Y58.13622
G01 X126.33822 Y58.02484
G01 X126.37444 Y57.98486
G01 X126.42306 Y57.93624
G01 X126.46304 Y57.90002
G01 X126.57441 Y57.81160
G01 X126.60190 Y57.79085
G01 X126.63169 Y57.77333
G01 X126.75597 Y57.70426
G01 X126.80472 Y57.68120
G01 X126.86834 Y57.65486
G01 X126.89890 Y57.64391
G01 X126.91907 Y57.63670
G01 X126.98424 Y57.61808
G01 X127.05585 Y57.59766
G01 X127.08920 Y57.58900
G01 X127.12338 Y57.58422
G01 X127.26463 Y57.56797
G01 X127.31851 Y57.56533
G01 X127.38737 Y57.56533
G01 X127.44121 Y57.56797
G01 X127.58249 Y57.58422
G01 X127.61663 Y57.58900
G01 X127.65000 Y57.59766
G01 X127.78676 Y57.63670
G01 X127.83751 Y57.65486
G01 X127.90113 Y57.68120
G01 X127.94988 Y57.70426
G01 X128.07416 Y57.77333
G01 X128.10388 Y57.79083
G01 X128.13143 Y57.81160
G01 X128.24281 Y57.90002
G01 X128.28279 Y57.93624
G01 X128.33141 Y57.98486
G01 X128.36763 Y58.02484
G01 X128.45605 Y58.13622
G01 X128.47680 Y58.16375
G01 X128.49432 Y58.19352
G01 X128.49653 Y58.19751
G01 X128.54703 Y58.27576
G01 X128.59349 Y58.33837
G01 X128.60672 Y58.35570
G01 X128.65521 Y58.41729
G01 X128.73928 Y58.51003
G01 X128.79999 Y58.56878
G01 X128.80263 Y58.57739
G01 X128.82137 Y58.67160
G01 X128.84058 Y58.86669
G01 X128.84294 Y58.91470
G01 X128.84294 Y59.51472
G01 X128.84058 Y59.56273
G01 X128.82137 Y59.75783
G01 X128.80263 Y59.85204
G01 X128.79999 Y59.86067
G01 X128.73928 Y59.91942
G01 X128.65521 Y60.01216
G01 X128.60672 Y60.07375
G01 X128.59344 Y60.09113
G01 X128.54698 Y60.15379
G01 X128.49656 Y60.23189
G01 X128.49432 Y60.23596
G01 X128.47682 Y60.26568
G01 X128.45605 Y60.29323
G01 X128.36763 Y60.40461
G01 X128.33141 Y60.44459
G01 X128.28279 Y60.49321
G01 X128.24281 Y60.52943
G01 X128.13143 Y60.61785
G01 X128.10388 Y60.63862
G01 X128.07416 Y60.65612
G01 X127.94988 Y60.72519
G01 X127.90113 Y60.74825
G01 X127.83751 Y60.77459
G01 X127.78676 Y60.79275
G01 X127.65000 Y60.83179
G01 X127.61660 Y60.84045
G01 X127.58249 Y60.84523
G01 X127.44121 Y60.86148
G01 X127.38737 Y60.86413
G01 X127.31851 Y60.86413
G01 X127.26463 Y60.86148
G01 X127.12338 Y60.84523
G01 X127.08922 Y60.84045
G01 X127.05585 Y60.83179
G01 X126.91909 Y60.79275
G01 X126.86834 Y60.77459
G01 X126.80472 Y60.74825
G01 X126.75597 Y60.72519
G01 X126.63169 Y60.65612
G01 X126.60197 Y60.63862
G01 X126.57441 Y60.61785
G01 X126.46304 Y60.52943
G01 X126.42306 Y60.49321
G01 X126.37444 Y60.44459
G01 X126.33822 Y60.40461
G01 X126.24980 Y60.29323
G01 X126.22903 Y60.26568
G01 X126.21152 Y60.23596
G01 X126.14246 Y60.11165
G01 X126.11940 Y60.06293
G01 X126.09306 Y59.99931
G01 X126.06827 Y59.93007
G01 X126.03063 Y59.84330
G01 X126.01732 Y59.81742
G01 X125.99611 Y59.77259
G01 X125.98539 Y59.74792
G01 X125.87678 Y59.56253
G01 X125.87617 Y59.56174
G01 X125.86441 Y59.54500
G01 X125.80993 Y59.52242
G01 X125.72847 Y59.49674
G01 X125.64381 Y59.48559
G01 X125.55849 Y59.48930
G01 X125.48201 Y59.49936
G01 X125.39857 Y59.51785
G01 X125.34071 Y59.54183
G01 X125.32738 Y59.56144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.38314 Y59.74388 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.38314 Y59.74388
G01 X122.36530 Y59.56273
G01 X122.36294 Y59.51472
G01 X122.36294 Y58.91470
G01 X122.36530 Y58.86669
G01 X122.38306 Y58.68641
G01 X122.39383 Y58.67249
G01 X122.43874 Y58.61823
G01 X122.45972 Y58.59456
G01 X122.56193 Y58.45293
G01 X122.57760 Y58.42545
G01 X122.59517 Y58.39619
G01 X122.61529 Y58.36433
G01 X122.63581 Y58.32976
G01 X122.71153 Y58.19352
G01 X122.72903 Y58.16375
G01 X122.74981 Y58.13624
G01 X122.83820 Y58.02484
G01 X122.87440 Y57.98491
G01 X122.92306 Y57.93624
G01 X122.96304 Y57.90002
G01 X123.07440 Y57.81163
G01 X123.10190 Y57.79085
G01 X123.13170 Y57.77333
G01 X123.25601 Y57.70426
G01 X123.30475 Y57.68120
G01 X123.36835 Y57.65486
G01 X123.39886 Y57.64394
G01 X123.41905 Y57.63672
G01 X123.48425 Y57.61808
G01 X123.55585 Y57.59766
G01 X123.58920 Y57.58900
G01 X123.62337 Y57.58422
G01 X123.76464 Y57.56797
G01 X123.81849 Y57.56533
G01 X123.88735 Y57.56533
G01 X123.94120 Y57.56797
G01 X124.08247 Y57.58422
G01 X124.11661 Y57.58900
G01 X124.15001 Y57.59766
G01 X124.28674 Y57.63670
G01 X124.33751 Y57.65486
G01 X124.40111 Y57.68120
G01 X124.44986 Y57.70426
G01 X124.57414 Y57.77333
G01 X124.60388 Y57.79083
G01 X124.63144 Y57.81163
G01 X124.74280 Y57.90002
G01 X124.78277 Y57.93624
G01 X124.83144 Y57.98491
G01 X124.86764 Y58.02484
G01 X124.95605 Y58.13622
G01 X124.97683 Y58.16378
G01 X124.99431 Y58.19349
G01 X125.06339 Y58.31778
G01 X125.08643 Y58.36652
G01 X125.11277 Y58.43009
G01 X125.13754 Y58.49936
G01 X125.17526 Y58.58623
G01 X125.18851 Y58.61198
G01 X125.20977 Y58.65697
G01 X125.22047 Y58.68158
G01 X125.32908 Y58.86695
G01 X125.32969 Y58.86779
G01 X125.34142 Y58.88445
G01 X125.34295 Y58.91470
G01 X125.34295 Y59.51472
G01 X125.34168 Y59.54038
G01 X125.32738 Y59.56144
G01 X125.27983 Y59.63852
G01 X125.23901 Y59.71201
G01 X125.22016 Y59.74785
G01 X125.18608 Y59.81673
G01 X125.17038 Y59.85054
G01 X125.15481 Y59.88648
G01 X125.13754 Y59.93009
G01 X125.11277 Y59.99936
G01 X125.10304 Y60.02491
G01 X125.08643 Y60.06293
G01 X125.06337 Y60.11165
G01 X124.99431 Y60.23596
G01 X124.97681 Y60.26570
G01 X124.95605 Y60.29323
G01 X124.86764 Y60.40461
G01 X124.83144 Y60.44454
G01 X124.78277 Y60.49321
G01 X124.74280 Y60.52943
G01 X124.63144 Y60.61782
G01 X124.60388 Y60.63862
G01 X124.57416 Y60.65612
G01 X124.44988 Y60.72519
G01 X124.40114 Y60.74825
G01 X124.33751 Y60.77459
G01 X124.28676 Y60.79275
G01 X124.15001 Y60.83179
G01 X124.11661 Y60.84045
G01 X124.08247 Y60.84523
G01 X123.94120 Y60.86148
G01 X123.88735 Y60.86413
G01 X123.81849 Y60.86413
G01 X123.76464 Y60.86148
G01 X123.62337 Y60.84523
G01 X123.58923 Y60.84045
G01 X123.55585 Y60.83179
G01 X123.41910 Y60.79275
G01 X123.36835 Y60.77459
G01 X123.30475 Y60.74825
G01 X123.25598 Y60.72519
G01 X123.13170 Y60.65612
G01 X123.10198 Y60.63862
G01 X123.07440 Y60.61782
G01 X122.96302 Y60.52943
G01 X122.92306 Y60.49321
G01 X122.87440 Y60.44454
G01 X122.83820 Y60.40461
G01 X122.74981 Y60.29321
G01 X122.72903 Y60.26570
G01 X122.71153 Y60.23593
G01 X122.63581 Y60.09969
G01 X122.61529 Y60.06512
G01 X122.58641 Y60.01942
G01 X122.57701 Y60.00418
G01 X122.54536 Y59.95135
G01 X122.46076 Y59.83459
G01 X122.39815 Y59.76156
G01 X122.39418 Y59.75691
G01 X122.38314 Y59.74388
G01 X122.32705 Y59.72887
G01 X122.24293 Y59.71404
G01 X122.15751 Y59.71404
G01 X122.07338 Y59.72887
G01 X121.99888 Y59.74884
G01 X121.91859 Y59.77805
G01 X121.85829 Y59.81290
G01 X121.84293 Y59.83888
G01 X121.80556 Y59.90213
G01 X121.77364 Y59.97927
G01 X121.72060 Y60.16583
G01 X121.71070 Y60.23012
G01 X121.70620 Y60.26471
G01 X121.70259 Y60.29915
G01 X121.70183 Y60.30693
G01 X121.69800 Y60.34792
G01 X121.69573 Y60.36872
G01 X121.68372 Y60.41526
G01 X121.66988 Y60.46227
G01 X121.66178 Y60.48795
G01 X121.64316 Y60.52585
G01 X121.62027 Y60.56918
G01 X121.60539 Y60.59590
G01 X121.58202 Y60.62613
G01 X121.55098 Y60.66407
G01 X121.52845 Y60.69026
G01 X121.50234 Y60.71272
G01 X121.46442 Y60.74375
G01 X121.43409 Y60.76720
G01 X121.40717 Y60.78218
G01 X121.36383 Y60.80507
G01 X121.32616 Y60.82356
G01 X121.30051 Y60.83166
G01 X121.25352 Y60.84551
G01 X121.20691 Y60.85752
G01 X121.18634 Y60.85976
G01 X121.14247 Y60.86387
G01 X121.13752 Y60.86413
G01 X121.10295 Y60.86496
G01 X119.60293 Y60.86496
G01 X119.56833 Y60.86413
G01 X119.56338 Y60.86387
G01 X119.51951 Y60.85976
G01 X119.49891 Y60.85752
G01 X119.45233 Y60.84551
G01 X119.40534 Y60.83166
G01 X119.37969 Y60.82356
G01 X119.34202 Y60.80510
G01 X119.29869 Y60.78218
G01 X119.27176 Y60.76722
G01 X119.24143 Y60.74375
G01 X119.20351 Y60.71272
G01 X119.17740 Y60.69026
G01 X119.15487 Y60.66405
G01 X119.12383 Y60.62613
G01 X119.10046 Y60.59588
G01 X119.08558 Y60.56918
G01 X119.06269 Y60.52585
G01 X119.04408 Y60.48793
G01 X119.03597 Y60.46227
G01 X119.02211 Y60.41526
G01 X119.01012 Y60.36872
G01 X119.00786 Y60.34792
G01 X119.00377 Y60.30428
G01 X119.00351 Y60.29913
G01 X119.00267 Y60.26471
G01 X119.00267 Y58.16471
G01 X119.00351 Y58.13032
G01 X119.00377 Y58.12517
G01 X119.00786 Y58.08153
G01 X119.01012 Y58.06075
G01 X119.02213 Y58.01419
G01 X119.03597 Y57.96718
G01 X119.04408 Y57.94150
G01 X119.06269 Y57.90360
G01 X119.08558 Y57.86027
G01 X119.10046 Y57.83357
G01 X119.12383 Y57.80332
G01 X119.15487 Y57.76540
G01 X119.17740 Y57.73919
G01 X119.20351 Y57.71673
G01 X119.24143 Y57.68570
G01 X119.27176 Y57.66225
G01 X119.29869 Y57.64727
G01 X119.34202 Y57.62438
G01 X119.34916 Y57.62065
G01 X119.37971 Y57.60589
G01 X119.40534 Y57.59779
G01 X119.45233 Y57.58394
G01 X119.49891 Y57.57193
G01 X119.51951 Y57.56969
G01 X119.56338 Y57.56558
G01 X119.56833 Y57.56533
G01 X119.60293 Y57.56446
G01 X121.10295 Y57.56446
G01 X121.13752 Y57.56533
G01 X121.14247 Y57.56558
G01 X121.18634 Y57.56969
G01 X121.20691 Y57.57193
G01 X121.25352 Y57.58394
G01 X121.30051 Y57.59779
G01 X121.32616 Y57.60589
G01 X121.36383 Y57.62438
G01 X121.40717 Y57.64727
G01 X121.43406 Y57.66223
G01 X121.46442 Y57.68570
G01 X121.50234 Y57.71673
G01 X121.52845 Y57.73919
G01 X121.55098 Y57.76540
G01 X121.58202 Y57.80332
G01 X121.60539 Y57.83357
G01 X121.62027 Y57.86027
G01 X121.64316 Y57.90360
G01 X121.66178 Y57.94150
G01 X121.66988 Y57.96718
G01 X121.68372 Y58.01419
G01 X121.69573 Y58.06073
G01 X121.69800 Y58.08153
G01 X121.70183 Y58.12253
G01 X121.70259 Y58.13030
G01 X121.70620 Y58.16471
G01 X121.71334 Y58.21526
G01 X121.72698 Y58.29240
G01 X121.79479 Y58.50286
G01 X121.83084 Y58.57998
G01 X121.84293 Y58.59850
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.38306 Y58.68641 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.38306 Y58.68641
G01 X122.38171 Y58.68689
G01 X122.29919 Y58.70914
G01 X122.21405 Y58.71671
G01 X122.12888 Y58.70934
G01 X122.05291 Y58.69603
G01 X121.97044 Y58.67406
G01 X121.89307 Y58.63809
G01 X121.84849 Y58.60698
G01 X121.84293 Y58.59850
G01 X121.84293 Y59.83888
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X114.34167 Y68.37231 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X114.34167 Y68.37231
G01 X114.34167 Y70.07231
G01 X114.34284 Y70.11298
G01 X114.34490 Y70.13048
G01 X114.37137 Y70.21661
G01 X114.41521 Y70.28910
G01 X114.47515 Y70.34904
G01 X114.54764 Y70.39288
G01 X114.63380 Y70.41938
G01 X114.65125 Y70.42141
G01 X114.69194 Y70.42258
G01 X116.39194 Y70.42258
G01 X116.43258 Y70.42141
G01 X116.45008 Y70.41935
G01 X116.53621 Y70.39288
G01 X116.59707 Y70.35692
G01 X116.60870 Y70.34907
G01 X116.66864 Y70.28910
G01 X116.71248 Y70.21661
G01 X116.73895 Y70.13048
G01 X116.74101 Y70.11298
G01 X116.74218 Y70.07231
G01 X116.74218 Y68.37231
G01 X116.74101 Y68.33167
G01 X116.73895 Y68.31417
G01 X116.71248 Y68.22804
G01 X116.66864 Y68.15555
G01 X116.60870 Y68.09561
G01 X116.53621 Y68.05177
G01 X116.45008 Y68.02530
G01 X116.43258 Y68.02324
G01 X116.39194 Y68.02207
G01 X114.69194 Y68.02207
G01 X114.65127 Y68.02324
G01 X114.63377 Y68.02530
G01 X114.54764 Y68.05177
G01 X114.47515 Y68.09561
G01 X114.41518 Y68.15558
G01 X114.40733 Y68.16716
G01 X114.37137 Y68.22804
G01 X114.34490 Y68.31417
G01 X114.34284 Y68.33167
G01 X114.34167 Y68.37231
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21094 Y62.58995 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21094 Y62.58995
G01 X112.21089 Y62.41464
G01 X112.27206 Y62.52904
G01 X112.29994 Y62.57078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21089 Y62.41464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21089 Y62.41464
G01 X112.20165 Y62.37769
G01 X112.18323 Y62.28536
G01 X112.15852 Y62.11871
G01 X112.15011 Y62.03372
G01 X112.14193 Y61.86709
G01 X112.14193 Y61.78457
G01 X112.15011 Y61.61792
G01 X112.15852 Y61.53293
G01 X112.18323 Y61.36628
G01 X112.20165 Y61.27393
G01 X112.21092 Y61.23697
G01 X112.27206 Y61.12260
G01 X112.30030 Y61.08025
G01 X112.30033 Y61.08025
G01 X112.34650 Y61.06004
G01 X112.36510 Y61.05257
G01 X112.51061 Y60.97916
G01 X112.56537 Y60.94480
G01 X112.57515 Y60.93878
G01 X112.63197 Y60.90433
G01 X112.69860 Y60.85864
G01 X112.71523 Y60.84680
G01 X112.77327 Y60.80964
G01 X112.86606 Y60.75648
G01 X112.92014 Y60.73090
G01 X112.98374 Y60.70454
G01 X113.04005 Y60.68439
G01 X113.14325 Y60.65638
G01 X113.21056 Y60.64162
G01 X113.22303 Y60.63951
G01 X113.37647 Y60.62592
G01 X113.41094 Y60.62371
G01 X113.44538 Y60.62592
G01 X113.59882 Y60.63951
G01 X113.61127 Y60.64162
G01 X113.67858 Y60.65638
G01 X113.69788 Y60.66161
G01 X113.78181 Y60.68439
G01 X113.83809 Y60.70454
G01 X113.90172 Y60.73090
G01 X113.95580 Y60.75648
G01 X114.04858 Y60.80964
G01 X114.10662 Y60.84680
G01 X114.11691 Y60.85412
G01 X114.23502 Y60.95303
G01 X114.26095 Y60.97581
G01 X114.28374 Y61.00174
G01 X114.38264 Y61.11983
G01 X114.38996 Y61.13011
G01 X114.42714 Y61.18820
G01 X114.48028 Y61.28094
G01 X114.50586 Y61.33504
G01 X114.53220 Y61.39864
G01 X114.55234 Y61.45495
G01 X114.58036 Y61.55815
G01 X114.59514 Y61.62546
G01 X114.59722 Y61.63794
G01 X114.61081 Y61.79138
G01 X114.61302 Y61.82582
G01 X114.61081 Y61.86029
G01 X114.59722 Y62.01373
G01 X114.59514 Y62.02618
G01 X114.58036 Y62.09349
G01 X114.55234 Y62.19676
G01 X114.53220 Y62.25300
G01 X114.50588 Y62.31657
G01 X114.48028 Y62.37073
G01 X114.42714 Y62.46344
G01 X114.41371 Y62.48592
G01 X114.38996 Y62.52153
G01 X114.38264 Y62.53181
G01 X114.28374 Y62.64992
G01 X114.26093 Y62.67583
G01 X114.23499 Y62.69867
G01 X114.11688 Y62.79755
G01 X114.10660 Y62.80486
G01 X114.04858 Y62.84202
G01 X113.95580 Y62.89519
G01 X113.90172 Y62.92076
G01 X113.83809 Y62.94710
G01 X113.78181 Y62.96725
G01 X113.67858 Y62.99526
G01 X113.61127 Y63.01004
G01 X113.59882 Y63.01213
G01 X113.44538 Y63.02572
G01 X113.41094 Y63.02793
G01 X113.37647 Y63.02572
G01 X113.22303 Y63.01213
G01 X113.21056 Y63.01004
G01 X113.14325 Y62.99526
G01 X113.04005 Y62.96725
G01 X112.98374 Y62.94710
G01 X112.92014 Y62.92076
G01 X112.86606 Y62.89519
G01 X112.77327 Y62.84200
G01 X112.71526 Y62.80486
G01 X112.69215 Y62.78843
G01 X112.62768 Y62.74530
G01 X112.58440 Y62.71779
G01 X112.57566 Y62.71233
G01 X112.51079 Y62.67235
G01 X112.39128 Y62.61091
G01 X112.34633 Y62.59176
G01 X112.31117 Y62.57603
G01 X112.29994 Y62.57078
G01 X112.29748 Y62.56963
G01 X112.22631 Y62.58155
G01 X112.21376 Y62.58599
G01 X112.21094 Y62.58995
G01 X112.14998 Y62.67583
G01 X112.12090 Y62.72391
G01 X112.07455 Y62.79267
G01 X112.01290 Y62.87481
G01 X111.93772 Y62.95254
G01 X111.92608 Y62.96041
G01 X111.86520 Y62.99638
G01 X111.77907 Y63.02285
G01 X111.76157 Y63.02490
G01 X111.72093 Y63.02607
G01 X110.02093 Y63.02607
G01 X109.98024 Y63.02490
G01 X109.96281 Y63.02287
G01 X109.87663 Y62.99638
G01 X109.80412 Y62.95254
G01 X109.74407 Y62.89249
G01 X109.69385 Y62.82084
G01 X109.65172 Y62.75335
G01 X109.64877 Y62.74804
G01 X109.65781 Y62.68101
G01 X109.65875 Y62.67583
G01 X109.66995 Y62.56857
G01 X109.67041 Y62.55216
G01 X109.67069 Y62.53260
G01 X109.67069 Y60.97583
G01 X109.67186 Y60.93512
G01 X109.67389 Y60.91764
G01 X109.70036 Y60.83154
G01 X109.72771 Y60.78404
G01 X109.74422 Y60.75902
G01 X109.80414 Y60.69910
G01 X109.87663 Y60.65526
G01 X109.96279 Y60.62879
G01 X109.98026 Y60.62674
G01 X110.02093 Y60.62557
G01 X111.72093 Y60.62557
G01 X111.76157 Y60.62674
G01 X111.77907 Y60.62879
G01 X111.86520 Y60.65526
G01 X111.93772 Y60.69910
G01 X112.01343 Y60.77751
G01 X112.06136 Y60.84017
G01 X112.10741 Y60.90733
G01 X112.14950 Y60.97583
G01 X112.21094 Y61.06123
G01 X112.21371 Y61.06506
G01 X112.28410 Y61.07992
G01 X112.29740 Y61.08155
G01 X112.30030 Y61.08025
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21092 Y61.23697 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21092 Y61.23697
G01 X112.21094 Y61.06123
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21094 Y58.77995 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21094 Y58.77995
G01 X112.21089 Y58.60464
G01 X112.27206 Y58.71904
G01 X112.29994 Y58.76078
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21089 Y58.60464 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21089 Y58.60464
G01 X112.20165 Y58.56769
G01 X112.18323 Y58.47536
G01 X112.15852 Y58.30871
G01 X112.15011 Y58.22372
G01 X112.14193 Y58.05709
G01 X112.14193 Y57.97457
G01 X112.15011 Y57.80792
G01 X112.15852 Y57.72293
G01 X112.18323 Y57.55628
G01 X112.20165 Y57.46393
G01 X112.21092 Y57.42697
G01 X112.27206 Y57.31260
G01 X112.30030 Y57.27025
G01 X112.30033 Y57.27025
G01 X112.34650 Y57.25004
G01 X112.36510 Y57.24257
G01 X112.51061 Y57.16916
G01 X112.56537 Y57.13480
G01 X112.57515 Y57.12878
G01 X112.63197 Y57.09433
G01 X112.69860 Y57.04864
G01 X112.71523 Y57.03680
G01 X112.77327 Y56.99964
G01 X112.86606 Y56.94648
G01 X112.92014 Y56.92090
G01 X112.98374 Y56.89454
G01 X113.04005 Y56.87439
G01 X113.14325 Y56.84638
G01 X113.21056 Y56.83162
G01 X113.22303 Y56.82951
G01 X113.37647 Y56.81592
G01 X113.41094 Y56.81371
G01 X113.44538 Y56.81592
G01 X113.59882 Y56.82951
G01 X113.61127 Y56.83162
G01 X113.67858 Y56.84638
G01 X113.78181 Y56.87439
G01 X113.83809 Y56.89454
G01 X113.90172 Y56.92090
G01 X113.95580 Y56.94648
G01 X114.04858 Y56.99964
G01 X114.10662 Y57.03680
G01 X114.11691 Y57.04412
G01 X114.23502 Y57.14303
G01 X114.26095 Y57.16581
G01 X114.28374 Y57.19174
G01 X114.38264 Y57.30983
G01 X114.38996 Y57.32011
G01 X114.42714 Y57.37820
G01 X114.48028 Y57.47094
G01 X114.50586 Y57.52504
G01 X114.53220 Y57.58864
G01 X114.55234 Y57.64495
G01 X114.58036 Y57.74815
G01 X114.59514 Y57.81546
G01 X114.59722 Y57.82794
G01 X114.61081 Y57.98138
G01 X114.61302 Y58.01582
G01 X114.61081 Y58.05029
G01 X114.59722 Y58.20373
G01 X114.59514 Y58.21618
G01 X114.58036 Y58.28349
G01 X114.55237 Y58.38666
G01 X114.53220 Y58.44300
G01 X114.50588 Y58.50657
G01 X114.48028 Y58.56070
G01 X114.42714 Y58.65344
G01 X114.38996 Y58.71153
G01 X114.38264 Y58.72181
G01 X114.28374 Y58.83992
G01 X114.26093 Y58.86583
G01 X114.23499 Y58.88867
G01 X114.11688 Y58.98755
G01 X114.10660 Y58.99486
G01 X114.04858 Y59.03202
G01 X113.95580 Y59.08519
G01 X113.90172 Y59.11076
G01 X113.83809 Y59.13710
G01 X113.78181 Y59.15725
G01 X113.67858 Y59.18526
G01 X113.61127 Y59.20004
G01 X113.59882 Y59.20213
G01 X113.44538 Y59.21572
G01 X113.41094 Y59.21793
G01 X113.37647 Y59.21572
G01 X113.22303 Y59.20213
G01 X113.21056 Y59.20004
G01 X113.14325 Y59.18526
G01 X113.04005 Y59.15725
G01 X112.98374 Y59.13710
G01 X112.92014 Y59.11076
G01 X112.86606 Y59.08519
G01 X112.77327 Y59.03200
G01 X112.71526 Y58.99486
G01 X112.69215 Y58.97843
G01 X112.62768 Y58.93530
G01 X112.58440 Y58.90779
G01 X112.57566 Y58.90233
G01 X112.51079 Y58.86235
G01 X112.39128 Y58.80091
G01 X112.34633 Y58.78176
G01 X112.31117 Y58.76603
G01 X112.29994 Y58.76078
G01 X112.29748 Y58.75963
G01 X112.22631 Y58.77155
G01 X112.21376 Y58.77599
G01 X112.21094 Y58.77995
G01 X112.14998 Y58.86581
G01 X112.12090 Y58.91391
G01 X112.07455 Y58.98267
G01 X112.01290 Y59.06481
G01 X111.93772 Y59.14254
G01 X111.86520 Y59.18638
G01 X111.77907 Y59.21285
G01 X111.76157 Y59.21490
G01 X111.72093 Y59.21607
G01 X110.02093 Y59.21607
G01 X109.98024 Y59.21490
G01 X109.96281 Y59.21287
G01 X109.87663 Y59.18638
G01 X109.80412 Y59.14254
G01 X109.74420 Y59.08262
G01 X109.70036 Y59.01010
G01 X109.67389 Y58.92402
G01 X109.67186 Y58.90652
G01 X109.67069 Y58.86581
G01 X109.67069 Y57.16581
G01 X109.67186 Y57.12512
G01 X109.67389 Y57.10764
G01 X109.70036 Y57.02154
G01 X109.74422 Y56.94899
G01 X109.80414 Y56.88910
G01 X109.87663 Y56.84526
G01 X109.96279 Y56.81879
G01 X109.98026 Y56.81674
G01 X110.02093 Y56.81557
G01 X111.72093 Y56.81557
G01 X111.76157 Y56.81674
G01 X111.77907 Y56.81879
G01 X111.86520 Y56.84526
G01 X111.93772 Y56.88910
G01 X112.01343 Y56.96751
G01 X112.06136 Y57.03017
G01 X112.10741 Y57.09733
G01 X112.14950 Y57.16581
G01 X112.21094 Y57.25123
G01 X112.21371 Y57.25506
G01 X112.28410 Y57.26992
G01 X112.29740 Y57.27155
G01 X112.30030 Y57.27025
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X112.21094 Y57.25123 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X112.21094 Y57.25123
G01 X112.21092 Y57.42697
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X104.12993 Y56.99075 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X104.12993 Y56.99075
G01 X104.06839 Y56.91577
G01 X104.00507 Y56.85245
G01 X104.00245 Y56.85212
G01 X103.99745 Y56.85153
G01 X104.00245 Y56.85214
G01 X104.00245 Y56.85212
G01 X104.06930 Y56.81501
G01 X104.11939 Y56.77988
G01 X104.12993 Y56.77071
G01 X104.12993 Y56.99075
G01 X104.15135 Y57.05059
G01 X104.17847 Y57.13977
G01 X104.21774 Y57.29659
G01 X104.23313 Y57.37386
G01 X104.25643 Y57.53071
G01 X104.26338 Y57.60132
G01 X104.26676 Y57.66977
G01 X104.26763 Y57.68430
G01 X104.26846 Y57.69662
G01 X104.26963 Y57.71112
G01 X104.27388 Y57.75786
G01 X104.27614 Y57.79233
G01 X104.27388 Y57.82677
G01 X104.26963 Y57.87353
G01 X104.26846 Y57.88803
G01 X104.26763 Y57.90035
G01 X104.26676 Y57.91485
G01 X104.26338 Y57.98333
G01 X104.25643 Y58.05395
G01 X104.23313 Y58.21079
G01 X104.21774 Y58.28806
G01 X104.18871 Y58.40398
G01 X104.18696 Y58.41104
G01 X104.23466 Y58.50708
G01 X104.27459 Y58.57625
G01 X104.35886 Y58.69425
G01 X104.38459 Y58.72357
G01 X104.41591 Y58.75699
G01 X107.59823 Y61.93931
G01 X107.66762 Y62.00017
G01 X107.72934 Y62.04754
G01 X107.73127 Y62.04901
G01 X107.83861 Y62.07438
G01 X107.85284 Y62.07662
G01 X107.85837 Y62.07746
G01 X107.86891 Y62.07903
G01 X107.92612 Y62.08993
G01 X107.93368 Y62.09171
G01 X107.95052 Y62.09564
G01 X108.07598 Y62.13618
G01 X108.13064 Y62.15640
G01 X108.14021 Y62.16146
G01 X108.27834 Y62.23575
G01 X108.29810 Y62.24677
G01 X108.33528 Y62.27454
G01 X108.44763 Y62.36435
G01 X108.45713 Y62.37332
G01 X108.50485 Y62.42305
G01 X108.57582 Y62.50469
G01 X108.60468 Y62.54400
G01 X108.64262 Y62.60146
G01 X108.67958 Y62.66384
G01 X108.71341 Y62.73351
G01 X108.71649 Y62.73979
G01 X108.74745 Y62.80192
G01 X108.75497 Y62.81660
G01 X108.79157 Y62.88612
G01 X108.82436 Y62.94245
G01 X108.82517 Y62.94378
G01 X108.82322 Y62.99409
G01 X108.82185 Y63.01883
G01 X108.81801 Y63.07227
G01 X108.81809 Y63.17680
G01 X108.81814 Y63.17718
G01 X108.81875 Y63.18645
G01 X108.81943 Y63.19734
G01 X108.82014 Y63.21136
G01 X108.81788 Y63.24583
G01 X108.80823 Y63.35200
G01 X108.80381 Y63.40085
G01 X108.80361 Y63.40202
G01 X108.78842 Y63.46928
G01 X108.75624 Y63.58495
G01 X108.74346 Y63.61952
G01 X108.71646 Y63.68284
G01 X108.67958 Y63.75881
G01 X108.64262 Y63.82119
G01 X108.60468 Y63.87865
G01 X108.58309 Y63.90806
G01 X108.46269 Y63.96501
G01 X108.40691 Y63.98817
G01 X108.25009 Y64.04428
G01 X108.20879 Y64.05685
G01 X108.05197 Y64.09612
G01 X108.02020 Y64.10247
G01 X107.86335 Y64.12574
G01 X107.83704 Y64.12833
G01 X107.68022 Y64.13603
G01 X107.65566 Y64.13603
G01 X107.49881 Y64.12833
G01 X107.47250 Y64.12574
G01 X107.31565 Y64.10247
G01 X107.28388 Y64.09612
G01 X107.12706 Y64.05685
G01 X107.08576 Y64.04428
G01 X106.92894 Y63.98817
G01 X106.87316 Y63.96501
G01 X106.71631 Y63.89081
G01 X106.63976 Y63.84977
G01 X106.58842 Y63.81901
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X105.40938 Y61.92874 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X105.40938 Y61.92874
G01 X104.34792 Y60.86725
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X104.24489 Y62.37705 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X104.24489 Y62.37705
G01 X104.25516 Y62.37032
G01 X104.30575 Y62.27997
G01 X104.33704 Y62.16918
G01 X104.34190 Y62.13860
G01 X104.34794 Y62.06181
G01 X104.34792 Y60.86725
G01 X104.28525 Y60.71597
G01 X104.22478 Y60.59666
G01 X104.19188 Y60.54302
G01 X104.10626 Y60.42961
G01 X104.09572 Y60.41818
G01 X104.07659 Y60.39829
G01 X102.62877 Y58.95049
G01 X102.60507 Y58.92557
G01 X102.58196 Y58.90010
G01 X102.56153 Y58.87256
G01 X102.52326 Y58.81526
G01 X102.51693 Y58.80472
G01 X102.48594 Y58.75742
G01 X102.48571 Y58.75707
G01 X102.46194 Y58.73621
G01 X102.45557 Y58.73037
G01 X102.41919 Y58.69923
G01 X102.34424 Y58.63931
G01 X102.33476 Y58.63035
G01 X102.28701 Y58.58061
G01 X102.21602 Y58.49893
G01 X102.18719 Y58.45966
G01 X102.16131 Y58.42184
G01 X102.14927 Y58.40226
G01 X102.11226 Y58.33982
G01 X102.07540 Y58.26390
G01 X102.06641 Y58.24465
G01 X102.06712 Y58.23934
G01 X102.07492 Y58.19245
G01 X102.08749 Y58.12928
G01 X102.09649 Y58.06916
G01 X102.10129 Y58.02057
G01 X102.10858 Y57.97112
G01 X102.10977 Y57.96512
G01 X102.11645 Y57.92024
G01 X102.12625 Y57.82077
G01 X102.12704 Y57.81171
G01 X102.12928 Y57.78201
G01 X102.13004 Y57.77322
G01 X102.13880 Y57.68445
G01 X102.14022 Y57.66530
G01 X102.14259 Y57.61689
G01 X102.14645 Y57.57777
G01 X102.16971 Y57.42093
G01 X102.17868 Y57.37597
G01 X102.21797 Y57.21912
G01 X102.23474 Y57.16403
G01 X102.29085 Y57.00719
G01 X102.29557 Y56.99438
G01 X102.33474 Y56.95430
G01 X102.34421 Y56.94534
G01 X102.45658 Y56.85555
G01 X102.49377 Y56.82779
G01 X102.51358 Y56.81671
G01 X102.56778 Y56.78755
G01 X102.65168 Y56.74244
G01 X102.66118 Y56.73741
G01 X102.71586 Y56.71719
G01 X102.84139 Y56.67663
G01 X102.86570 Y56.67094
G01 X102.93342 Y56.65857
G01 X103.02892 Y56.64590
G01 X103.08947 Y56.64292
G01 X103.15838 Y56.64292
G01 X103.21894 Y56.64590
G01 X103.31442 Y56.65857
G01 X103.38211 Y56.67094
G01 X103.40646 Y56.67663
G01 X103.53197 Y56.71719
G01 X103.59658 Y56.74165
G01 X103.61162 Y56.74821
G01 X103.72074 Y56.78572
G01 X103.74718 Y56.79258
G01 X103.78167 Y56.80233
G01 X103.82419 Y56.81544
G01 X103.99745 Y56.85153
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.27785 Y50.11121 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.27785 Y50.11121
G01 X99.17084 Y50.35353
G01 X99.14722 Y50.36806
G01 X99.09202 Y50.39447
G01 X99.08095 Y50.39841
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.17691 Y50.51347 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.17691 Y50.51347
G01 X99.08740 Y50.40443
G01 X99.08151 Y50.39854
G01 X98.98620 Y50.37705
G01 X98.82613 Y50.32488
G01 X98.81315 Y50.31914
G01 X98.75766 Y50.29719
G01 X98.75514 Y50.29633
G01 X98.65265 Y50.25124
G01 X98.61519 Y50.23110
G01 X98.60564 Y50.22607
G01 X98.55105 Y50.20588
G01 X98.53604 Y50.20103
G01 X98.44905 Y50.16638
G01 X98.40541 Y50.14560
G01 X98.40193 Y50.14395
G01 X98.33670 Y50.11332
G01 X98.18786 Y50.02468
G01 X98.18072 Y50.01949
G01 X98.14201 Y49.99333
G01 X98.09492 Y49.99333
G01 X97.93884 Y50.00870
G01 X97.84463 Y50.02744
G01 X97.69454 Y50.07296
G01 X97.60582 Y50.10971
G01 X97.46749 Y50.18365
G01 X97.38763 Y50.23702
G01 X97.37709 Y50.24566
G01 X97.26640 Y50.33651
G01 X97.19848 Y50.40443
G01 X97.09898 Y50.52566
G01 X97.04562 Y50.60552
G01 X96.97168 Y50.74383
G01 X96.93493 Y50.83257
G01 X96.88941 Y50.98266
G01 X96.87066 Y51.07687
G01 X96.85530 Y51.23293
G01 X96.85530 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.14198 Y49.99333 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.14198 Y49.99333
G01 X98.13977 Y49.99183
G01 X98.13210 Y49.97357
G01 X98.10244 Y49.87558
G01 X98.09383 Y49.77426
G01 X98.09611 Y49.77174
G01 X98.17346 Y49.68757
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.38113 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.38113 Y51.24354
G01 X96.44575 Y51.21977
G01 X96.50506 Y51.20473
G01 X96.60653 Y51.19008
G01 X96.70882 Y51.19683
G01 X96.80749 Y51.22475
G01 X96.85446 Y51.24357
G01 X96.85530 Y51.24489
G01 X96.86142 Y51.25472
G01 X96.90567 Y51.32409
G01 X96.98275 Y51.47410
G01 X96.99502 Y51.50539
G01 X97.01077 Y51.54248
G01 X97.01974 Y51.56214
G01 X97.05395 Y51.65284
G01 X97.06739 Y51.68916
G01 X97.09439 Y51.75248
G01 X97.13127 Y51.82846
G01 X97.16823 Y51.89084
G01 X97.20617 Y51.94829
G01 X97.23503 Y51.98761
G01 X97.30599 Y52.06925
G01 X97.35372 Y52.11898
G01 X97.36322 Y52.12795
G01 X97.47556 Y52.21776
G01 X97.51275 Y52.24552
G01 X97.53251 Y52.25655
G01 X97.67064 Y52.33084
G01 X97.68021 Y52.33590
G01 X97.73487 Y52.35612
G01 X97.86040 Y52.39668
G01 X97.88473 Y52.40237
G01 X97.95248 Y52.41476
G01 X98.04790 Y52.42741
G01 X98.10853 Y52.43039
G01 X98.17734 Y52.43039
G01 X98.23795 Y52.42741
G01 X98.33337 Y52.41476
G01 X98.40112 Y52.40237
G01 X98.42545 Y52.39668
G01 X98.55098 Y52.35612
G01 X98.60566 Y52.33590
G01 X98.61521 Y52.33084
G01 X98.65265 Y52.31073
G01 X98.68128 Y52.29615
G01 X98.69751 Y52.28835
G01 X98.75682 Y52.26308
G01 X98.82621 Y52.23714
G01 X98.83685 Y52.23326
G01 X98.89804 Y52.21136
G01 X98.98620 Y52.18489
G01 X99.08422 Y52.16066
G01 X99.08740 Y52.15751
G01 X99.17691 Y52.04842
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.08267 Y52.16104 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.08267 Y52.16104
G01 X99.09730 Y52.16579
G01 X99.17724 Y52.21195
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.28399 Y54.75672 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.28399 Y54.75672
G01 X99.17693 Y55.01600
G01 X99.17691 Y55.51349
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.33599 Y57.55433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.33599 Y57.55433
G01 X98.19096 Y57.56860
G01 X98.09492 Y57.56860
G01 X98.04788 Y57.56398
G01 X97.74760 Y57.86428
G01 X97.74948 Y57.88222
G01 X97.74948 Y57.94340
G01 X97.73876 Y58.04528
G01 X97.70711 Y58.14272
G01 X97.66065 Y58.22316
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X94.97600 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X94.97600 Y54.97409
G01 X94.99985 Y54.99794
G01 X95.04692 Y54.99332
G01 X95.14296 Y54.99332
G01 X95.19000 Y54.99794
G01 X95.21385 Y54.97409
G01 X95.19310 Y54.97097
G01 X94.99675 Y54.97097
G01 X94.97600 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.32995 Y56.18590 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.32995 Y56.18590
G01 X93.33458 Y56.23294
G01 X93.33458 Y56.32898
G01 X93.32995 Y56.37605
G01 X93.57092 Y56.61704
G01 X93.81192 Y56.37605
G01 X93.80730 Y56.32898
G01 X93.80730 Y56.23294
G01 X93.81192 Y56.18593
G01 X93.57092 Y55.94491
G01 X93.32995 Y56.18590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.92800 Y57.58786 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.92800 Y57.58786
G01 X91.94875 Y57.59098
G01 X92.14510 Y57.59098
G01 X92.16585 Y57.58786
G01 X92.14197 Y57.56398
G01 X92.09496 Y57.56860
G01 X91.99892 Y57.56860
G01 X91.95188 Y57.56398
G01 X91.92800 Y57.58786
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.92800 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.92800 Y54.97409
G01 X91.95185 Y54.99794
G01 X91.99892 Y54.99332
G01 X92.09496 Y54.99332
G01 X92.14200 Y54.99794
G01 X92.16585 Y54.97409
G01 X92.14510 Y54.97097
G01 X91.94875 Y54.97097
G01 X91.92800 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.28195 Y56.18590 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.28195 Y56.18590
G01 X90.52292 Y55.94491
G01 X90.76392 Y56.18593
G01 X90.75930 Y56.23294
G01 X90.75930 Y56.32898
G01 X90.76392 Y56.37605
G01 X90.52292 Y56.61704
G01 X90.28195 Y56.37605
G01 X90.28658 Y56.32898
G01 X90.28658 Y56.23294
G01 X90.28195 Y56.18590
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.88000 Y57.58786 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.88000 Y57.58786
G01 X88.90388 Y57.56398
G01 X88.95092 Y57.56860
G01 X89.04696 Y57.56860
G01 X89.09397 Y57.56398
G01 X89.11785 Y57.58786
G01 X89.09710 Y57.59098
G01 X88.90075 Y57.59098
G01 X88.88000 Y57.58786
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.68526 Y56.28097 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.68526 Y56.28097
G01 X87.69402 Y56.39794
G01 X87.71592 Y56.37605
G01 X87.71130 Y56.32898
G01 X87.71130 Y56.23294
G01 X87.71592 Y56.18593
G01 X87.69402 Y56.16401
G01 X87.68526 Y56.28097
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.88000 Y54.97409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.88000 Y54.97409
G01 X88.90385 Y54.99794
G01 X88.95092 Y54.99332
G01 X89.04696 Y54.99332
G01 X89.09400 Y54.99794
G01 X89.11785 Y54.97409
G01 X89.09710 Y54.97097
G01 X88.90075 Y54.97097
G01 X88.88000 Y54.97409
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.28513 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.28513 Y51.24354
G01 X90.34975 Y51.21977
G01 X90.40906 Y51.20473
G01 X90.51053 Y51.19008
G01 X90.61282 Y51.19683
G01 X90.71149 Y51.22475
G01 X90.75846 Y51.24357
G01 X90.75930 Y51.24489
G01 X90.76542 Y51.25472
G01 X90.80967 Y51.32409
G01 X90.88675 Y51.47410
G01 X90.89902 Y51.50539
G01 X90.91477 Y51.54248
G01 X90.92374 Y51.56214
G01 X90.95795 Y51.65284
G01 X90.97139 Y51.68916
G01 X90.99839 Y51.75248
G01 X91.03527 Y51.82846
G01 X91.07222 Y51.89084
G01 X91.11017 Y51.94829
G01 X91.13903 Y51.98761
G01 X91.20999 Y52.06925
G01 X91.25772 Y52.11898
G01 X91.26722 Y52.12795
G01 X91.37956 Y52.21776
G01 X91.41675 Y52.24552
G01 X91.43651 Y52.25655
G01 X91.57464 Y52.33084
G01 X91.58421 Y52.33590
G01 X91.63887 Y52.35612
G01 X91.76440 Y52.39668
G01 X91.78873 Y52.40237
G01 X91.85648 Y52.41476
G01 X91.95190 Y52.42741
G01 X92.01253 Y52.43039
G01 X92.08134 Y52.43039
G01 X92.14195 Y52.42741
G01 X92.23737 Y52.41476
G01 X92.30512 Y52.40237
G01 X92.32945 Y52.39668
G01 X92.45498 Y52.35612
G01 X92.50964 Y52.33590
G01 X92.51921 Y52.33084
G01 X92.65734 Y52.25655
G01 X92.67707 Y52.24552
G01 X92.71428 Y52.21776
G01 X92.79544 Y52.15289
G01 X92.82665 Y52.12795
G01 X92.83613 Y52.11898
G01 X92.88385 Y52.06925
G01 X92.95482 Y51.98761
G01 X92.98368 Y51.94829
G01 X93.02162 Y51.89084
G01 X93.05858 Y51.82846
G01 X93.09546 Y51.75248
G01 X93.12246 Y51.68916
G01 X93.13592 Y51.65274
G01 X93.13831 Y51.64497
G01 X93.14222 Y51.63247
G01 X93.17758 Y51.54202
G01 X93.19493 Y51.50511
G01 X93.20864 Y51.47425
G01 X93.22023 Y51.44654
G01 X93.28352 Y51.32404
G01 X93.33313 Y51.24357
G01 X93.33313 Y51.24354
G01 X93.33458 Y51.24123
G01 X93.33458 Y51.23293
G01 X93.31921 Y51.07687
G01 X93.30047 Y50.98266
G01 X93.27463 Y50.89750
G01 X93.25495 Y50.83257
G01 X93.21819 Y50.74383
G01 X93.14426 Y50.60552
G01 X93.09089 Y50.52566
G01 X92.99140 Y50.40443
G01 X92.92348 Y50.33651
G01 X92.80224 Y50.23702
G01 X92.72239 Y50.18365
G01 X92.58406 Y50.10971
G01 X92.49534 Y50.07296
G01 X92.34525 Y50.02744
G01 X92.25104 Y50.00870
G01 X92.09496 Y49.99333
G01 X91.99892 Y49.99333
G01 X91.84284 Y50.00870
G01 X91.74863 Y50.02744
G01 X91.59854 Y50.07296
G01 X91.52074 Y50.10519
G01 X91.50982 Y50.10971
G01 X91.37149 Y50.18365
G01 X91.29163 Y50.23702
G01 X91.17040 Y50.33651
G01 X91.10248 Y50.40443
G01 X91.00298 Y50.52566
G01 X90.94962 Y50.60552
G01 X90.87568 Y50.74383
G01 X90.83893 Y50.83257
G01 X90.79341 Y50.98266
G01 X90.77466 Y51.07687
G01 X90.75930 Y51.23293
G01 X90.75930 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.33313 Y51.24354 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.33313 Y51.24354
G01 X93.39775 Y51.21977
G01 X93.45706 Y51.20473
G01 X93.55853 Y51.19008
G01 X93.66082 Y51.19683
G01 X93.75949 Y51.22475
G01 X93.80646 Y51.24357
G01 X93.80730 Y51.24489
G01 X93.81342 Y51.25472
G01 X93.85767 Y51.32409
G01 X93.93475 Y51.47410
G01 X93.94702 Y51.50539
G01 X93.96277 Y51.54248
G01 X93.97174 Y51.56214
G01 X94.00595 Y51.65284
G01 X94.01939 Y51.68916
G01 X94.04639 Y51.75248
G01 X94.08327 Y51.82846
G01 X94.12023 Y51.89084
G01 X94.15817 Y51.94829
G01 X94.18703 Y51.98761
G01 X94.25799 Y52.06925
G01 X94.30572 Y52.11898
G01 X94.31522 Y52.12795
G01 X94.42756 Y52.21776
G01 X94.46475 Y52.24552
G01 X94.48451 Y52.25655
G01 X94.62264 Y52.33084
G01 X94.63221 Y52.33590
G01 X94.68687 Y52.35612
G01 X94.81240 Y52.39668
G01 X94.83673 Y52.40237
G01 X94.90448 Y52.41476
G01 X94.99990 Y52.42741
G01 X95.06053 Y52.43039
G01 X95.12934 Y52.43039
G01 X95.18995 Y52.42741
G01 X95.28537 Y52.41476
G01 X95.35312 Y52.40237
G01 X95.37745 Y52.39668
G01 X95.50298 Y52.35612
G01 X95.55764 Y52.33590
G01 X95.56721 Y52.33084
G01 X95.70534 Y52.25655
G01 X95.72507 Y52.24552
G01 X95.76228 Y52.21776
G01 X95.84344 Y52.15289
G01 X95.87465 Y52.12795
G01 X95.88413 Y52.11898
G01 X95.93185 Y52.06925
G01 X96.00282 Y51.98761
G01 X96.03168 Y51.94829
G01 X96.06962 Y51.89084
G01 X96.10658 Y51.82846
G01 X96.14346 Y51.75248
G01 X96.17046 Y51.68916
G01 X96.18392 Y51.65274
G01 X96.18631 Y51.64497
G01 X96.19022 Y51.63247
G01 X96.22558 Y51.54202
G01 X96.24293 Y51.50511
G01 X96.25664 Y51.47425
G01 X96.26823 Y51.44654
G01 X96.33152 Y51.32404
G01 X96.38113 Y51.24357
G01 X96.38113 Y51.24354
G01 X96.38258 Y51.24123
G01 X96.38258 Y51.23293
G01 X96.36721 Y51.07687
G01 X96.34847 Y50.98266
G01 X96.32263 Y50.89750
G01 X96.30295 Y50.83257
G01 X96.26619 Y50.74383
G01 X96.19226 Y50.60552
G01 X96.13889 Y50.52566
G01 X96.03940 Y50.40443
G01 X95.97148 Y50.33651
G01 X95.85024 Y50.23702
G01 X95.77039 Y50.18365
G01 X95.63206 Y50.10971
G01 X95.54334 Y50.07296
G01 X95.39325 Y50.02744
G01 X95.29904 Y50.00870
G01 X95.14296 Y49.99333
G01 X95.04692 Y49.99333
G01 X94.89084 Y50.00870
G01 X94.79663 Y50.02744
G01 X94.64654 Y50.07296
G01 X94.55782 Y50.10971
G01 X94.41949 Y50.18365
G01 X94.38992 Y50.20341
G01 X94.33963 Y50.23702
G01 X94.21840 Y50.33651
G01 X94.15048 Y50.40443
G01 X94.05098 Y50.52566
G01 X93.99762 Y50.60552
G01 X93.92368 Y50.74383
G01 X93.88693 Y50.83257
G01 X93.84141 Y50.98266
G01 X93.82266 Y51.07687
G01 X93.80730 Y51.23293
G01 X93.80730 Y51.24489
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.43313 Y48.70238 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.43313 Y48.70238
G01 X93.44961 Y48.78528
G01 X93.49513 Y48.93535
G01 X93.53188 Y49.02409
G01 X93.60582 Y49.16240
G01 X93.65919 Y49.24228
G01 X93.67811 Y49.26534
G01 X93.75868 Y49.36351
G01 X93.82660 Y49.43143
G01 X93.94784 Y49.53092
G01 X94.02769 Y49.58429
G01 X94.16600 Y49.65820
G01 X94.25474 Y49.69496
G01 X94.40483 Y49.74050
G01 X94.49904 Y49.75922
G01 X94.65510 Y49.77461
G01 X94.75116 Y49.77461
G01 X94.90724 Y49.75922
G01 X95.00145 Y49.74050
G01 X95.15152 Y49.69496
G01 X95.24026 Y49.65820
G01 X95.37857 Y49.58429
G01 X95.45845 Y49.53092
G01 X95.57968 Y49.43143
G01 X95.64760 Y49.36351
G01 X95.74710 Y49.24228
G01 X95.80046 Y49.16240
G01 X95.87437 Y49.02409
G01 X95.91115 Y48.93535
G01 X95.95311 Y48.79699
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X96.04306 Y47.68699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X96.04306 Y47.68699
G01 X95.95261 Y47.82966
G01 X95.94684 Y47.83189
G01 X95.88806 Y47.84886
G01 X95.82754 Y47.85966
G01 X95.82568 Y47.85874
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.95492 Y48.18925 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.95492 Y48.18925
G01 X95.95314 Y48.17716
G01 X95.95314 Y47.82882
G01 X96.04306 Y47.68699
G01 X96.07953 Y47.61620
G01 X96.10074 Y47.57782
G01 X96.13991 Y47.51160
G01 X96.16640 Y47.47020
G01 X96.22634 Y47.41025
G01 X96.29883 Y47.36641
G01 X96.38499 Y47.33995
G01 X96.40247 Y47.33789
G01 X96.44313 Y47.33672
G01 X98.04310 Y47.33672
G01 X98.08377 Y47.33789
G01 X98.10127 Y47.33995
G01 X98.18740 Y47.36641
G01 X98.25992 Y47.41025
G01 X98.31984 Y47.47017
G01 X98.36370 Y47.54271
G01 X98.39014 Y47.62879
G01 X98.39217 Y47.64627
G01 X98.39337 Y47.68699
G01 X98.39337 Y49.28698
G01 X98.39217 Y49.32767
G01 X98.39014 Y49.34515
G01 X98.36370 Y49.43123
G01 X98.32895 Y49.49023
G01 X98.29482 Y49.53778
G01 X98.29403 Y49.53880
G01 X98.21811 Y49.63517
G01 X98.17346 Y49.68757
G01 X98.09616 Y49.77174
G01 X98.09611 Y49.77174
G01 X98.04313 Y49.77697
G01 X96.44313 Y49.77697
G01 X96.34755 Y49.76755
G01 X96.25563 Y49.73966
G01 X96.17092 Y49.69437
G01 X96.09665 Y49.63344
G01 X96.03572 Y49.55919
G01 X96.03018 Y49.54881
G01 X95.99043 Y49.47449
G01 X95.96256 Y49.38256
G01 X95.95314 Y49.28696
G01 X95.95311 Y48.79699
G01 X95.95492 Y48.78475
G01 X95.96429 Y48.68998
G01 X95.97199 Y48.53314
G01 X95.97199 Y48.44081
G01 X95.96429 Y48.28399
G01 X95.95492 Y48.18925
G01 X95.95309 Y48.17688
G01 X95.91115 Y48.03857
G01 X95.87437 Y47.94983
G01 X95.82568 Y47.85874
G01 X95.82568 Y47.85872
G01 X95.76665 Y47.82956
G01 X95.68517 Y47.78249
G01 X95.62068 Y47.74124
G01 X95.56889 Y47.70461
G01 X95.54981 Y47.69067
G01 X95.49317 Y47.64792
G01 X95.47791 Y47.63608
G01 X95.46709 Y47.62742
G01 X95.46688 Y47.62727
G01 X95.37051 Y47.55021
G01 X95.33328 Y47.52242
G01 X95.31347 Y47.51135
G01 X95.17534 Y47.43708
G01 X95.16587 Y47.43207
G01 X95.11123 Y47.41188
G01 X94.98565 Y47.37129
G01 X94.96140 Y47.36560
G01 X94.89358 Y47.35320
G01 X94.79810 Y47.34053
G01 X94.73752 Y47.33756
G01 X94.66871 Y47.33756
G01 X94.60813 Y47.34053
G01 X94.51268 Y47.35320
G01 X94.44489 Y47.36560
G01 X94.42061 Y47.37129
G01 X94.29503 Y47.41188
G01 X94.24039 Y47.43207
G01 X94.23087 Y47.43710
G01 X94.09277 Y47.51137
G01 X94.07296 Y47.52244
G01 X94.03577 Y47.55018
G01 X93.92343 Y47.63997
G01 X93.91393 Y47.64896
G01 X93.86620 Y47.69870
G01 X93.78652 Y47.79036
G01 X93.76351 Y47.81731
G01 X93.71583 Y47.87037
G01 X93.71098 Y47.87573
G01 X93.66831 Y47.92234
G01 X93.60173 Y47.98721
G01 X93.53056 Y48.04929
G01 X93.47987 Y48.08894
G01 X93.43460 Y48.09140
G01 X93.38642 Y48.08899
G01 X93.37392 Y48.07924
G01 X93.33686 Y48.04901
G01 X93.26435 Y47.98724
G01 X93.16557 Y47.88757
G01 X93.15119 Y47.87022
G01 X93.15099 Y47.86999
G01 X93.10298 Y47.81711
G01 X93.00003 Y47.69870
G01 X92.95233 Y47.64896
G01 X92.94283 Y47.64000
G01 X92.83051 Y47.55021
G01 X92.79330 Y47.52244
G01 X92.77347 Y47.51135
G01 X92.63534 Y47.43708
G01 X92.62587 Y47.43207
G01 X92.57123 Y47.41188
G01 X92.44565 Y47.37129
G01 X92.42140 Y47.36560
G01 X92.35358 Y47.35320
G01 X92.25810 Y47.34053
G01 X92.19752 Y47.33756
G01 X92.12871 Y47.33756
G01 X92.06813 Y47.34053
G01 X91.97268 Y47.35320
G01 X91.90489 Y47.36560
G01 X91.88061 Y47.37129
G01 X91.75503 Y47.41188
G01 X91.70039 Y47.43207
G01 X91.69087 Y47.43710
G01 X91.55277 Y47.51137
G01 X91.53296 Y47.52244
G01 X91.49577 Y47.55018
G01 X91.38343 Y47.63997
G01 X91.37393 Y47.64896
G01 X91.32620 Y47.69870
G01 X91.24652 Y47.79036
G01 X91.22351 Y47.81731
G01 X91.17583 Y47.87037
G01 X91.17098 Y47.87573
G01 X91.12831 Y47.92234
G01 X91.06173 Y47.98721
G01 X90.99056 Y48.04929
G01 X90.93987 Y48.08894
G01 X90.89460 Y48.09140
G01 X90.84642 Y48.08899
G01 X90.83392 Y48.07924
G01 X90.79686 Y48.04901
G01 X90.72435 Y47.98724
G01 X90.62557 Y47.88757
G01 X90.61119 Y47.87022
G01 X90.61099 Y47.86999
G01 X90.56298 Y47.81711
G01 X90.46003 Y47.69870
G01 X90.41233 Y47.64896
G01 X90.40283 Y47.64000
G01 X90.29051 Y47.55021
G01 X90.25330 Y47.52244
G01 X90.23347 Y47.51135
G01 X90.09534 Y47.43708
G01 X90.08587 Y47.43207
G01 X90.03123 Y47.41188
G01 X89.90565 Y47.37129
G01 X89.88140 Y47.36560
G01 X89.81358 Y47.35320
G01 X89.71810 Y47.34053
G01 X89.65752 Y47.33756
G01 X89.58871 Y47.33756
G01 X89.52813 Y47.34053
G01 X89.43268 Y47.35320
G01 X89.36489 Y47.36560
G01 X89.34061 Y47.37129
G01 X89.21503 Y47.41188
G01 X89.16039 Y47.43207
G01 X89.15087 Y47.43710
G01 X89.01277 Y47.51137
G01 X88.99296 Y47.52244
G01 X88.95577 Y47.55018
G01 X88.84343 Y47.64000
G01 X88.83393 Y47.64896
G01 X88.78620 Y47.69870
G01 X88.71523 Y47.78033
G01 X88.68638 Y47.81965
G01 X88.64843 Y47.87711
G01 X88.61147 Y47.93949
G01 X88.57459 Y48.01546
G01 X88.54759 Y48.07873
G01 X88.53482 Y48.11335
G01 X88.50263 Y48.22900
G01 X88.49524 Y48.25798
G01 X88.48742 Y48.29636
G01 X88.48722 Y48.29748
G01 X88.47317 Y48.45252
G01 X88.47091 Y48.48698
G01 X88.47317 Y48.52143
G01 X88.48724 Y48.67652
G01 X88.48742 Y48.67761
G01 X88.50263 Y48.74497
G01 X88.53479 Y48.86054
G01 X88.54762 Y48.89521
G01 X88.57459 Y48.95848
G01 X88.61150 Y49.03448
G01 X88.64843 Y49.09684
G01 X88.68145 Y49.14751
G01 X88.68638 Y49.15429
G01 X88.71521 Y49.19359
G01 X88.78569 Y49.27464
G01 X88.78620 Y49.27525
G01 X88.83393 Y49.32498
G01 X88.84343 Y49.33395
G01 X88.88620 Y49.36814
G01 X88.93248 Y49.40857
G01 X88.95254 Y49.42767
G01 X88.95732 Y49.43219
G01 X89.00507 Y49.47685
G01 X89.09069 Y49.57075
G01 X89.11566 Y49.60265
G01 X89.13230 Y49.62333
G01 X89.17929 Y49.68005
G01 X89.19392 Y49.70077
G01 X89.19616 Y49.70395
G01 X89.19730 Y49.71198
G01 X89.19054 Y49.81424
G01 X89.16268 Y49.91284
G01 X89.13997 Y49.96966
G01 X89.12382 Y50.00034
G01 X89.12293 Y50.00080
G01 X89.20304 Y50.00870
G01 X89.29725 Y50.02744
G01 X89.44734 Y50.07296
G01 X89.53606 Y50.10971
G01 X89.67439 Y50.18365
G01 X89.75424 Y50.23702
G01 X89.87548 Y50.33651
G01 X89.94340 Y50.40443
G01 X90.04289 Y50.52566
G01 X90.09626 Y50.60552
G01 X90.17019 Y50.74383
G01 X90.20695 Y50.83257
G01 X90.22663 Y50.89750
G01 X90.25247 Y50.98266
G01 X90.27121 Y51.07687
G01 X90.28658 Y51.23293
G01 X90.28658 Y51.24123
G01 X90.28513 Y51.24354
G01 X90.28513 Y51.24357
G01 X90.23552 Y51.32404
G01 X90.17223 Y51.44654
G01 X90.16064 Y51.47425
G01 X90.14693 Y51.50511
G01 X90.12958 Y51.54202
G01 X90.09422 Y51.63247
G01 X90.09031 Y51.64497
G01 X90.08792 Y51.65274
G01 X90.07446 Y51.68916
G01 X90.04746 Y51.75248
G01 X90.01058 Y51.82846
G01 X89.97362 Y51.89084
G01 X89.93568 Y51.94829
G01 X89.90682 Y51.98761
G01 X89.83585 Y52.06925
G01 X89.78813 Y52.11898
G01 X89.77865 Y52.12795
G01 X89.74744 Y52.15289
G01 X89.66628 Y52.21776
G01 X89.62907 Y52.24552
G01 X89.60934 Y52.25655
G01 X89.47121 Y52.33084
G01 X89.46164 Y52.33590
G01 X89.40698 Y52.35612
G01 X89.28145 Y52.39668
G01 X89.25712 Y52.40237
G01 X89.18937 Y52.41476
G01 X89.09395 Y52.42741
G01 X89.03334 Y52.43039
G01 X88.96453 Y52.43039
G01 X88.90390 Y52.42741
G01 X88.80848 Y52.41476
G01 X88.74073 Y52.40237
G01 X88.71640 Y52.39668
G01 X88.59087 Y52.35612
G01 X88.53621 Y52.33590
G01 X88.52664 Y52.33084
G01 X88.38851 Y52.25655
G01 X88.36875 Y52.24552
G01 X88.33156 Y52.21776
G01 X88.21922 Y52.12795
G01 X88.20972 Y52.11898
G01 X88.16199 Y52.06925
G01 X88.09103 Y51.98761
G01 X88.06217 Y51.94829
G01 X88.02422 Y51.89084
G01 X87.98727 Y51.82846
G01 X87.95039 Y51.75248
G01 X87.92339 Y51.68916
G01 X87.91061 Y51.65457
G01 X87.90896 Y51.64862
G01 X87.87843 Y51.53892
G01 X87.86324 Y51.47166
G01 X87.86304 Y51.47052
G01 X87.84896 Y51.31548
G01 X87.84670 Y51.28098
G01 X87.84899 Y51.24647
G01 X87.86306 Y51.09142
G01 X87.86324 Y51.09028
G01 X87.87843 Y51.02305
G01 X87.87937 Y51.01975
G01 X87.91061 Y50.90735
G01 X87.92339 Y50.87278
G01 X87.95039 Y50.80946
G01 X87.98727 Y50.73349
G01 X88.02422 Y50.67111
G01 X88.06217 Y50.61365
G01 X88.09103 Y50.57433
G01 X88.16199 Y50.49270
G01 X88.20972 Y50.44296
G01 X88.21922 Y50.43400
G01 X88.33156 Y50.34418
G01 X88.36875 Y50.31644
G01 X88.38856 Y50.30537
G01 X88.47970 Y50.25635
G01 X88.52666 Y50.23110
G01 X88.53614 Y50.22610
G01 X88.59082 Y50.20588
G01 X88.73382 Y50.15965
G01 X88.74010 Y50.15772
G01 X88.80746 Y50.13684
G01 X88.82819 Y50.13009
G01 X88.88767 Y50.10969
G01 X88.95958 Y50.08111
G01 X89.04198 Y50.04378
G01 X89.12293 Y50.00080
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.19392 Y49.70077 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.19392 Y49.70077
G01 X89.32483 Y49.74050
G01 X89.41904 Y49.75922
G01 X89.57510 Y49.77461
G01 X89.67116 Y49.77461
G01 X89.82724 Y49.75922
G01 X89.92145 Y49.74050
G01 X90.07152 Y49.69496
G01 X90.16026 Y49.65820
G01 X90.29857 Y49.58429
G01 X90.37845 Y49.53092
G01 X90.49968 Y49.43143
G01 X90.56760 Y49.36351
G01 X90.66709 Y49.24228
G01 X90.72046 Y49.16240
G01 X90.79437 Y49.02409
G01 X90.83115 Y48.93535
G01 X90.87667 Y48.78528
G01 X90.89313 Y48.70238
G01 X90.89313 Y48.27136
G01 X90.87667 Y48.18866
G01 X90.84642 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.93987 Y48.08894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.93987 Y48.08894
G01 X90.90961 Y48.18866
G01 X90.89313 Y48.27136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.89313 Y48.70238 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.89313 Y48.70238
G01 X90.90961 Y48.78528
G01 X90.95513 Y48.93535
G01 X90.99188 Y49.02409
G01 X91.06582 Y49.16240
G01 X91.11919 Y49.24228
G01 X91.13811 Y49.26534
G01 X91.21868 Y49.36351
G01 X91.28660 Y49.43143
G01 X91.40784 Y49.53092
G01 X91.48769 Y49.58429
G01 X91.62600 Y49.65820
G01 X91.71474 Y49.69496
G01 X91.86483 Y49.74050
G01 X91.95904 Y49.75922
G01 X92.11510 Y49.77461
G01 X92.21116 Y49.77461
G01 X92.36724 Y49.75922
G01 X92.46145 Y49.74050
G01 X92.61152 Y49.69496
G01 X92.70026 Y49.65820
G01 X92.83857 Y49.58429
G01 X92.91845 Y49.53092
G01 X93.03968 Y49.43143
G01 X93.10760 Y49.36351
G01 X93.20709 Y49.24228
G01 X93.26046 Y49.16240
G01 X93.33437 Y49.02409
G01 X93.37115 Y48.93535
G01 X93.41667 Y48.78528
G01 X93.43313 Y48.70238
G01 X93.43313 Y48.27136
G01 X93.41667 Y48.18866
G01 X93.38642 Y48.08899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.43313 Y48.27136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.43313 Y48.27136
G01 X93.44961 Y48.18866
G01 X93.47987 Y48.08894
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.47984 Y41.26495 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.47984 Y41.26495
G01 X93.44961 Y41.16528
G01 X93.43313 Y41.08238
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.38634 Y41.26505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.38634 Y41.26505
G01 X93.41667 Y41.16528
G01 X93.43313 Y41.08238
G01 X93.43313 Y40.65136
G01 X93.41667 Y40.56866
G01 X93.38642 Y40.46899
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.47987 Y40.46894 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.47987 Y40.46894
G01 X93.44961 Y40.56866
G01 X93.43313 Y40.65136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.89313 Y41.08238 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.89313 Y41.08238
G01 X90.90961 Y41.16528
G01 X90.93984 Y41.26495
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X90.84634 Y41.26505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X90.84634 Y41.26505
G01 X90.87667 Y41.16528
G01 X90.89313 Y41.08238
G01 X90.89313 Y40.65136
G01 X90.87667 Y40.56866
G01 X90.83115 Y40.41857
G01 X90.79437 Y40.32983
G01 X90.72046 Y40.19152
G01 X90.66709 Y40.11166
G01 X90.56760 Y39.99043
G01 X90.49968 Y39.92251
G01 X90.37845 Y39.82302
G01 X90.29857 Y39.76965
G01 X90.16026 Y39.69571
G01 X90.07152 Y39.65896
G01 X89.92145 Y39.61344
G01 X89.82724 Y39.59470
G01 X89.70177 Y39.58233
G01 X89.67098 Y39.58083
G01 X89.57525 Y39.58083
G01 X89.54495 Y39.58230
G01 X88.82580 Y39.58230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.92554 Y39.78472 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.92554 Y39.78472
G01 X88.92572 Y39.78433
G01 X88.94769 Y39.76965
G01 X89.08600 Y39.69571
G01 X89.17474 Y39.65896
G01 X89.32483 Y39.61344
G01 X89.41904 Y39.59470
G01 X89.54454 Y39.58233
G01 X89.54495 Y39.58230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.70129 Y39.58230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.70129 Y39.58230
G01 X90.62455 Y39.58230
G01 X90.67256 Y39.57994
G01 X90.74086 Y39.57324
G01 X90.83507 Y39.55449
G01 X90.90072 Y39.53458
G01 X90.98947 Y39.49782
G01 X91.04997 Y39.46546
G01 X91.06067 Y39.45833
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.35401 Y39.86716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.35401 Y39.86716
G01 X91.28660 Y39.92251
G01 X91.21868 Y39.99043
G01 X91.11919 Y40.11166
G01 X91.06582 Y40.19152
G01 X90.99188 Y40.32983
G01 X90.95513 Y40.41857
G01 X90.90961 Y40.56866
G01 X90.89313 Y40.65136
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.67406 Y37.90232 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.67406 Y37.90232
G01 X90.27660 Y37.90232
G01 X91.65267 Y36.52625
G01 X91.58978 Y36.44962
G01 X91.53641 Y36.36976
G01 X91.46250 Y36.23143
G01 X91.42574 Y36.14271
G01 X91.38020 Y35.99262
G01 X91.36372 Y35.90977
G01 X91.36372 Y35.47876
G01 X91.34726 Y35.39600
G01 X91.31700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.96593 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.96593 Y33.57716
G01 X90.02242 Y33.53080
G01 X90.08335 Y33.45653
G01 X90.12864 Y33.37183
G01 X90.15653 Y33.27990
G01 X90.16593 Y33.18432
G01 X90.16593 Y33.12433
G01 X90.18592 Y33.12433
G01 X90.18592 Y33.22057
G01 X90.18137 Y33.27175
G01 X90.15198 Y33.37449
G01 X90.10398 Y33.46639
G01 X90.03839 Y33.54681
G01 X89.96593 Y33.60591
G01 X89.96593 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.96593 Y30.96274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.96593 Y30.96274
G01 X90.03839 Y31.02184
G01 X90.10398 Y31.10226
G01 X90.15198 Y31.19416
G01 X90.18137 Y31.29690
G01 X90.18592 Y31.34808
G01 X90.18592 Y31.44432
G01 X90.16593 Y31.44432
G01 X90.16593 Y31.38430
G01 X90.15653 Y31.28872
G01 X90.12864 Y31.19680
G01 X90.08335 Y31.11209
G01 X90.02242 Y31.03782
G01 X89.96593 Y30.99146
G01 X89.96593 Y30.96274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.08595 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.08595 Y31.60432
G01 X88.08595 Y33.18432
G01 X88.09534 Y33.27990
G01 X88.12323 Y33.37183
G01 X88.16852 Y33.45653
G01 X88.22946 Y33.53080
G01 X88.28592 Y33.57713
G01 X88.28592 Y33.60591
G01 X88.21343 Y33.54681
G01 X88.14790 Y33.46644
G01 X88.12334 Y33.41943
G01 X88.08247 Y33.35422
G01 X88.03192 Y33.29624
G01 X87.98821 Y33.25341
G01 X87.90797 Y33.18978
G01 X87.81628 Y33.14424
G01 X87.71709 Y33.11871
G01 X87.65656 Y33.10975
G01 X87.59705 Y33.10667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.37793 Y30.96274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.37793 Y30.96274
G01 X84.37793 Y30.99146
G01 X84.43442 Y31.03782
G01 X84.49535 Y31.11209
G01 X84.54064 Y31.19680
G01 X84.56853 Y31.28872
G01 X84.57793 Y31.38430
G01 X84.57793 Y31.44432
G01 X84.59792 Y31.44432
G01 X84.59792 Y31.34808
G01 X84.59337 Y31.29690
G01 X84.56398 Y31.19416
G01 X84.51598 Y31.10226
G01 X84.45039 Y31.02184
G01 X84.37793 Y30.96274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.09532 Y29.03991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.09532 Y29.03991
G01 X87.10764 Y28.99109
G01 X87.10807 Y28.98949
G01 X87.11729 Y28.98189
G01 X87.19718 Y28.92853
G01 X87.24472 Y28.90313
G01 X87.33347 Y28.86635
G01 X87.38506 Y28.85070
G01 X87.47927 Y28.83196
G01 X87.53291 Y28.82667
G01 X87.58094 Y28.82431
G01 X88.13093 Y28.82431
G01 X88.17896 Y28.82667
G01 X88.23261 Y28.83196
G01 X88.32682 Y28.85070
G01 X88.37840 Y28.86635
G01 X88.46715 Y28.90313
G01 X88.47129 Y28.90531
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.04945 Y28.89279 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.04945 Y28.89279
G01 X87.04945 Y28.89281
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.04262 Y28.89045 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.04262 Y28.89045
G01 X87.04945 Y28.89279
G01 X87.06964 Y28.88880
G01 X87.21973 Y28.84326
G01 X87.30848 Y28.80651
G01 X87.44678 Y28.73259
G01 X87.52664 Y28.67920
G01 X87.64787 Y28.57973
G01 X87.71579 Y28.51179
G01 X87.81528 Y28.39058
G01 X87.86865 Y28.31070
G01 X87.94259 Y28.17239
G01 X87.97934 Y28.08365
G01 X88.02486 Y27.93361
G01 X88.04134 Y27.85075
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.04134 Y27.41974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.04134 Y27.41974
G01 X88.05780 Y27.33696
G01 X88.10332 Y27.18687
G01 X88.14010 Y27.09813
G01 X88.21401 Y26.95982
G01 X88.26738 Y26.87994
G01 X88.36687 Y26.75873
G01 X88.43479 Y26.69081
G01 X88.47132 Y26.66084
G01 X88.47132 Y26.62764
G01 X88.32146 Y26.76673
G01 X88.23614 Y26.83016
G01 X88.19938 Y26.85170
G01 X88.12115 Y26.88873
G01 X88.03764 Y26.91144
G01 X87.95143 Y26.91908
G01 X87.89024 Y26.91908
G01 X87.83720 Y26.91349
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.95088 Y20.57584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.95088 Y20.57584
G01 X84.95037 Y20.57459
G01 X84.95222 Y20.55697
G01 X84.98387 Y20.45953
G01 X85.02967 Y20.38021
G01 X85.03017 Y20.37990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.88461 Y18.69992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.88461 Y18.69992
G01 X83.96853 Y18.67447
G01 X84.05728 Y18.63772
G01 X84.19558 Y18.56378
G01 X84.27544 Y18.51041
G01 X84.39667 Y18.41092
G01 X84.46459 Y18.34300
G01 X84.53520 Y18.25697
G01 X84.56408 Y18.22177
G01 X84.61745 Y18.14191
G01 X84.69139 Y18.00361
G01 X84.72814 Y17.91486
G01 X84.77366 Y17.76477
G01 X84.79241 Y17.67056
G01 X84.80777 Y17.51448
G01 X84.80777 Y17.41844
G01 X84.79241 Y17.26236
G01 X84.77366 Y17.16815
G01 X84.72814 Y17.01809
G01 X84.69139 Y16.92934
G01 X84.61745 Y16.79101
G01 X84.56408 Y16.71115
G01 X84.46459 Y16.58992
G01 X84.39667 Y16.52200
G01 X84.27544 Y16.42251
G01 X84.19558 Y16.36914
G01 X84.05728 Y16.29523
G01 X83.96853 Y16.25845
G01 X83.81844 Y16.21293
G01 X83.72423 Y16.19419
G01 X83.56818 Y16.17882
G01 X83.47211 Y16.17882
G01 X83.31603 Y16.19419
G01 X83.22182 Y16.21293
G01 X83.07176 Y16.25845
G01 X82.98301 Y16.29523
G01 X82.84471 Y16.36914
G01 X82.76482 Y16.42251
G01 X82.64359 Y16.52200
G01 X82.57567 Y16.58992
G01 X82.47618 Y16.71115
G01 X82.42281 Y16.79101
G01 X82.34890 Y16.92934
G01 X82.31212 Y17.01809
G01 X82.27013 Y17.15647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.15555 Y18.69992 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.15555 Y18.69992
G01 X83.07176 Y18.67447
G01 X82.98301 Y18.63772
G01 X82.84471 Y18.56378
G01 X82.76482 Y18.51041
G01 X82.64359 Y18.41092
G01 X82.57567 Y18.34300
G01 X82.47618 Y18.22177
G01 X82.42281 Y18.14191
G01 X82.34890 Y18.00361
G01 X82.31212 Y17.91486
G01 X82.27011 Y17.77635
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.31773 Y13.72355 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.31773 Y13.72355
G01 X85.31331 Y13.70989
G01 X85.30259 Y13.60801
G01 X85.30259 Y13.54682
G01 X85.31331 Y13.44497
G01 X85.34496 Y13.34753
G01 X85.38956 Y13.27029
G01 X85.39286 Y13.26790
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.37112 Y11.19940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.37112 Y11.19940
G01 X83.28004 Y11.17179
G01 X83.19721 Y11.15533
G01 X83.28004 Y11.13885
G01 X83.37158 Y11.11109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.13066 Y8.60761 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.13066 Y8.60761
G01 X83.12154 Y8.57365
G01 X83.10551 Y8.47241
G01 X83.11087 Y8.37005
G01 X83.13742 Y8.27101
G01 X83.15936 Y8.21389
G01 X83.17679 Y8.17970
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.49295 Y7.00337 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.49295 Y7.00337
G01 X81.46851 Y7.06235
G01 X81.33915 Y7.30439
G01 X81.28576 Y7.38427
G01 X81.11167 Y7.59641
G01 X81.04375 Y7.66433
G01 X80.83158 Y7.83845
G01 X80.75172 Y7.89182
G01 X80.50969 Y8.02118
G01 X80.42094 Y8.05796
G01 X80.15830 Y8.13761
G01 X80.06409 Y8.15636
G01 X79.79097 Y8.18326
G01 X79.69490 Y8.18326
G01 X79.42178 Y8.15636
G01 X79.32757 Y8.13761
G01 X79.06493 Y8.05796
G01 X78.97619 Y8.02118
G01 X78.73415 Y7.89182
G01 X78.65429 Y7.83845
G01 X78.44213 Y7.66433
G01 X78.37421 Y7.59641
G01 X78.23794 Y7.43035
G01 X78.20011 Y7.38427
G01 X78.14675 Y7.30439
G01 X78.01736 Y7.06235
G01 X77.99293 Y7.00335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.99293 Y4.88781 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.99293 Y4.88781
G01 X78.01027 Y4.84597
G01 X78.02795 Y4.83460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X77.97583 Y4.84653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X77.97583 Y4.84653
G01 X77.99293 Y4.88781
G01 X77.99293 Y7.00335
G01 X77.96852 Y7.06235
G01 X77.83913 Y7.30439
G01 X77.78576 Y7.38427
G01 X77.61167 Y7.59641
G01 X77.54373 Y7.66433
G01 X77.33159 Y7.83845
G01 X77.25173 Y7.89182
G01 X77.00967 Y8.02118
G01 X76.92095 Y8.05796
G01 X76.65831 Y8.13761
G01 X76.56410 Y8.15636
G01 X76.29097 Y8.18326
G01 X76.19491 Y8.18326
G01 X75.92179 Y8.15636
G01 X75.82758 Y8.13761
G01 X75.56494 Y8.05796
G01 X75.47619 Y8.02118
G01 X75.23416 Y7.89182
G01 X75.15427 Y7.83845
G01 X74.94213 Y7.66433
G01 X74.87421 Y7.59641
G01 X74.73794 Y7.43035
G01 X74.70010 Y7.38427
G01 X74.64673 Y7.30439
G01 X74.51737 Y7.06235
G01 X74.49293 Y7.00335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.51981 Y8.44602 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.51981 Y8.44602
G01 X72.59223 Y8.43164
G01 X72.74831 Y8.41627
G01 X72.84437 Y8.41627
G01 X73.00043 Y8.43164
G01 X73.09464 Y8.45039
G01 X73.24473 Y8.49590
G01 X73.33347 Y8.53266
G01 X73.47178 Y8.60660
G01 X73.55164 Y8.65996
G01 X73.67287 Y8.75945
G01 X73.74079 Y8.82737
G01 X73.84028 Y8.94861
G01 X73.89365 Y9.02847
G01 X73.96759 Y9.16679
G01 X74.00434 Y9.25552
G01 X74.04986 Y9.40560
G01 X74.06860 Y9.49981
G01 X74.08397 Y9.65590
G01 X74.08397 Y9.75193
G01 X74.06860 Y9.90802
G01 X74.04986 Y10.00223
G01 X74.00434 Y10.15229
G01 X73.96759 Y10.24104
G01 X73.89365 Y10.37936
G01 X73.84028 Y10.45922
G01 X73.74079 Y10.58046
G01 X73.67287 Y10.64838
G01 X73.55164 Y10.74787
G01 X73.47178 Y10.80123
G01 X73.33347 Y10.87515
G01 X73.24473 Y10.91193
G01 X73.09464 Y10.95744
G01 X73.01176 Y10.97393
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.58075 Y10.97393 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.58075 Y10.97393
G01 X72.49802 Y10.95744
G01 X72.40686 Y10.92978
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.40632 Y11.01835 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.40632 Y11.01835
G01 X72.40871 Y10.98513
G01 X72.40686 Y10.92978
G01 X72.40249 Y10.92409
G01 X72.36004 Y10.87205
G01 X72.29865 Y10.80126
G01 X72.21874 Y10.72092
G01 X72.18125 Y10.68825
G01 X72.17628 Y10.68391
G01 X72.12840 Y10.64142
G01 X72.10079 Y10.61818
G01 X72.01664 Y10.55089
G01 X72.00714 Y10.54195
G01 X71.95944 Y10.49222
G01 X71.93594 Y10.46522
G01 X71.88844 Y10.41058
G01 X71.85961 Y10.37129
G01 X71.82164 Y10.31383
G01 X71.78466 Y10.25140
G01 X71.74778 Y10.17545
G01 X71.72078 Y10.11211
G01 X71.71369 Y10.09290
G01 X71.70798 Y10.07749
G01 X71.67582 Y9.96186
G01 X71.66063 Y9.89455
G01 X71.66045 Y9.89349
G01 X71.64638 Y9.73837
G01 X71.64412 Y9.70393
G01 X71.64638 Y9.66946
G01 X71.66045 Y9.51439
G01 X71.66063 Y9.51330
G01 X71.66670 Y9.48267
G01 X71.67582 Y9.44599
G01 X71.70800 Y9.33029
G01 X71.72078 Y9.29572
G01 X71.74780 Y9.23235
G01 X71.78466 Y9.15646
G01 X71.82167 Y9.09400
G01 X71.85959 Y9.03662
G01 X71.88844 Y8.99730
G01 X71.95941 Y8.91564
G01 X72.00714 Y8.86591
G01 X72.01661 Y8.85694
G01 X72.12898 Y8.76715
G01 X72.16662 Y8.73906
G01 X72.18567 Y8.72775
G01 X72.25372 Y8.68186
G01 X72.30305 Y8.64432
G01 X72.31425 Y8.63563
G01 X72.37562 Y8.58709
G01 X72.50254 Y8.46535
G01 X72.51382 Y8.45247
G01 X72.51981 Y8.44604
G01 X72.51981 Y8.44602
G01 X72.52128 Y8.44447
G01 X72.52819 Y8.39265
G01 X72.53101 Y8.29019
G01 X72.51247 Y8.18938
G01 X72.50686 Y8.17581
G01 X72.49228 Y8.16329
G01 X72.43589 Y8.11493
G01 X72.42647 Y8.10866
G01 X72.37986 Y8.07569
G01 X72.35258 Y8.05514
G01 X72.21148 Y7.96984
G01 X72.17831 Y7.95440
G01 X72.11760 Y7.92946
G01 X72.10526 Y7.92504
G01 X72.04166 Y7.89870
G01 X71.96927 Y7.86443
G01 X71.79926 Y7.76997
G01 X71.76950 Y7.75247
G01 X71.74194 Y7.73167
G01 X71.58959 Y7.61076
G01 X71.53025 Y7.55699
G01 X71.48156 Y7.50830
G01 X71.42779 Y7.44897
G01 X71.35154 Y7.35288
G01 X71.30404 Y7.29893
G01 X71.27607 Y7.27025
G01 X71.25428 Y7.24688
G01 X71.23371 Y7.22387
G01 X71.02883 Y7.05621
G01 X71.00821 Y7.04363
G01 X71.00770 Y7.04330
G01 X70.97740 Y7.04409
G01 X70.97557 Y7.04526
G01 X70.95784 Y7.05669
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.99294 Y7.00335 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.99294 Y7.00335
G01 X71.01009 Y7.04478
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X72.49228 Y8.16329 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X72.49228 Y8.16329
G01 X72.69492 Y8.18326
G01 X72.79096 Y8.18326
G01 X73.06408 Y8.15636
G01 X73.15829 Y8.13761
G01 X73.40307 Y8.06337
G01 X73.42093 Y8.05796
G01 X73.50967 Y8.02118
G01 X73.75171 Y7.89182
G01 X73.83159 Y7.83845
G01 X74.04373 Y7.66433
G01 X74.11165 Y7.59641
G01 X74.28577 Y7.38427
G01 X74.33914 Y7.30439
G01 X74.46850 Y7.06235
G01 X74.49293 Y7.00335
G01 X74.49293 Y4.88781
G01 X74.51026 Y4.84597
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X74.49293 Y4.88781 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X74.49293 Y4.88781
G01 X74.47581 Y4.84653
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.99294 Y4.88783 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.99294 Y4.88783
G01 X70.97582 Y4.84651
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.02792 Y4.83460 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.02792 Y4.83460
G01 X71.01029 Y4.84597
G01 X70.99294 Y4.88783
G01 X70.99289 Y4.92139
G01 X70.99289 Y6.96985
G01 X70.99294 Y7.00335
G01 X70.97557 Y7.04526
G01 X70.97557 Y7.04528
G01 X70.95784 Y7.05669
G01 X70.94753 Y7.06306
G01 X70.74166 Y7.23454
G01 X70.73109 Y7.24668
G01 X70.70308 Y7.27711
G01 X70.68182 Y7.29893
G01 X70.63434 Y7.35285
G01 X70.55807 Y7.44894
G01 X70.50430 Y7.50828
G01 X70.45558 Y7.55699
G01 X70.39627 Y7.61076
G01 X70.29919 Y7.68778
G01 X70.24389 Y7.73167
G01 X70.21639 Y7.75245
G01 X70.18659 Y7.76997
G01 X70.01656 Y7.86446
G01 X69.94420 Y7.89870
G01 X69.88057 Y7.92504
G01 X69.80516 Y7.95201
G01 X69.68014 Y7.98773
G01 X69.66472 Y7.99212
G01 X69.61865 Y8.00700
G01 X69.55863 Y8.02872
G01 X69.55174 Y8.03116
G01 X69.49922 Y8.04957
G01 X69.28850 Y8.15852
G01 X69.25258 Y8.18326
G01 X69.19490 Y8.18326
G01 X68.92177 Y8.15636
G01 X68.82757 Y8.13761
G01 X68.56493 Y8.05796
G01 X68.47621 Y8.02118
G01 X68.23412 Y7.89182
G01 X68.15429 Y7.83845
G01 X67.94215 Y7.66433
G01 X67.87420 Y7.59641
G01 X67.73793 Y7.43035
G01 X67.70011 Y7.38427
G01 X67.64674 Y7.30439
G01 X67.51736 Y7.06235
G01 X67.49292 Y7.00335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.25258 Y8.18326 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.25258 Y8.18326
G01 X69.25017 Y8.18493
G01 X69.24733 Y8.19049
G01 X69.22541 Y8.24762
G01 X69.19891 Y8.34655
G01 X69.19355 Y8.44881
G01 X69.20956 Y8.54996
G01 X69.22396 Y8.60383
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.32881 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.32881 Y11.15533
G01 X69.41164 Y11.13885
G01 X69.50318 Y11.11109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.50270 Y11.19940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.50270 Y11.19940
G01 X69.50092 Y11.14393
G01 X69.50318 Y11.11109
G01 X69.54936 Y11.05279
G01 X69.61108 Y10.98282
G01 X69.67725 Y10.91576
G01 X69.72406 Y10.87357
G01 X69.72843 Y10.86969
G01 X69.78126 Y10.82282
G01 X69.80887 Y10.79953
G01 X69.89302 Y10.73230
G01 X69.90249 Y10.72333
G01 X69.95025 Y10.67360
G01 X70.02121 Y10.59196
G01 X70.05007 Y10.55264
G01 X70.08801 Y10.49519
G01 X70.12497 Y10.43281
G01 X70.16183 Y10.35683
G01 X70.18880 Y10.29356
G01 X70.20163 Y10.25894
G01 X70.23379 Y10.14332
G01 X70.24900 Y10.07596
G01 X70.24920 Y10.07487
G01 X70.26327 Y9.91978
G01 X70.26554 Y9.88531
G01 X70.26327 Y9.85087
G01 X70.24920 Y9.69577
G01 X70.24900 Y9.69471
G01 X70.23381 Y9.62735
G01 X70.20163 Y9.51170
G01 X70.18885 Y9.47708
G01 X70.16183 Y9.41381
G01 X70.12497 Y9.33784
G01 X70.08801 Y9.27546
G01 X70.05007 Y9.21800
G01 X70.02121 Y9.17868
G01 X69.95025 Y9.09705
G01 X69.90249 Y9.04731
G01 X69.89302 Y9.03835
G01 X69.78067 Y8.94853
G01 X69.74349 Y8.92079
G01 X69.72365 Y8.90972
G01 X69.58558 Y8.83545
G01 X69.56673 Y8.82567
G01 X69.52332 Y8.80398
G01 X69.48637 Y8.78419
G01 X69.44283 Y8.75925
G01 X69.38423 Y8.72219
G01 X69.31159 Y8.67177
G01 X69.22896 Y8.60807
G01 X69.22396 Y8.60383
G01 X69.16135 Y8.59768
G01 X69.06531 Y8.59768
G01 X68.90923 Y8.61305
G01 X68.83127 Y8.62854
G01 X68.81499 Y8.63179
G01 X68.66495 Y8.67731
G01 X68.57621 Y8.71406
G01 X68.43790 Y8.78800
G01 X68.35802 Y8.84137
G01 X68.23679 Y8.94086
G01 X68.16887 Y9.00878
G01 X68.06935 Y9.13001
G01 X68.01601 Y9.20987
G01 X67.94210 Y9.34818
G01 X67.90534 Y9.43692
G01 X67.85980 Y9.58701
G01 X67.84108 Y9.68122
G01 X67.82569 Y9.83728
G01 X67.82569 Y9.93334
G01 X67.84108 Y10.08942
G01 X67.85980 Y10.18363
G01 X67.90534 Y10.33370
G01 X67.94210 Y10.42244
G01 X68.01601 Y10.56075
G01 X68.06935 Y10.64063
G01 X68.16887 Y10.76186
G01 X68.23679 Y10.82978
G01 X68.35802 Y10.92927
G01 X68.43790 Y10.98264
G01 X68.57621 Y11.05655
G01 X68.66495 Y11.09331
G01 X68.81499 Y11.13885
G01 X68.89777 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X65.88655 Y16.77122 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X65.88655 Y16.77122
G01 X65.89384 Y16.76746
G01 X65.95500 Y16.73630
G01 X66.20789 Y16.65184
G01 X66.26907 Y16.64214
G01 X66.37995 Y16.63338
G01 X67.45970 Y16.63338
G01 X67.49417 Y16.63254
G01 X67.52841 Y16.63084
G01 X67.56244 Y16.62581
G01 X67.62985 Y16.61237
G01 X67.66323 Y16.60402
G01 X67.69554 Y16.59246
G01 X67.75911 Y16.56612
G01 X67.79020 Y16.55144
G01 X67.81964 Y16.53381
G01 X67.87692 Y16.49553
G01 X67.90448 Y16.47509
G01 X67.92995 Y16.45200
G01 X67.95485 Y16.42827
G01 X69.60846 Y14.77468
G01 X69.63219 Y14.74979
G01 X69.65528 Y14.72431
G01 X69.67570 Y14.69676
G01 X69.68222 Y14.68784
G01 X69.71395 Y14.63948
G01 X69.73165 Y14.61001
G01 X69.74618 Y14.57928
G01 X69.74633 Y14.57898
G01 X69.77265 Y14.51537
G01 X69.78418 Y14.48306
G01 X69.79256 Y14.44971
G01 X69.80597 Y14.38225
G01 X69.81103 Y14.34824
G01 X69.81273 Y14.31395
G01 X69.81354 Y14.27951
G01 X69.81354 Y13.53826
G01 X69.81385 Y13.51804
G01 X69.81418 Y13.50661
G01 X69.83061 Y13.37372
G01 X69.83694 Y13.34474
G01 X69.85713 Y13.31858
G01 X69.90328 Y13.26432
G01 X69.93201 Y13.23377
G01 X69.95025 Y13.21360
G01 X70.02121 Y13.13196
G01 X70.05007 Y13.09264
G01 X70.08801 Y13.03519
G01 X70.12497 Y12.97281
G01 X70.16183 Y12.89683
G01 X70.18880 Y12.83356
G01 X70.20163 Y12.79894
G01 X70.23379 Y12.68332
G01 X70.24900 Y12.61596
G01 X70.24920 Y12.61487
G01 X70.26327 Y12.45978
G01 X70.26554 Y12.42533
G01 X70.26327 Y12.39087
G01 X70.24920 Y12.23577
G01 X70.24900 Y12.23471
G01 X70.23381 Y12.16735
G01 X70.20163 Y12.05170
G01 X70.18885 Y12.01708
G01 X70.16183 Y11.95381
G01 X70.12497 Y11.87784
G01 X70.08801 Y11.81546
G01 X70.05007 Y11.75800
G01 X70.02121 Y11.71868
G01 X69.95025 Y11.63705
G01 X69.90249 Y11.58731
G01 X69.89302 Y11.57835
G01 X69.80887 Y11.51111
G01 X69.78126 Y11.48782
G01 X69.73330 Y11.44528
G01 X69.72838 Y11.44096
G01 X69.69081 Y11.40824
G01 X69.61095 Y11.32795
G01 X69.54964 Y11.25726
G01 X69.50696 Y11.20494
G01 X69.50270 Y11.19940
G01 X69.41164 Y11.17179
G01 X69.32881 Y11.15533
G01 X68.89777 Y11.15533
G01 X68.81499 Y11.17179
G01 X68.66495 Y11.21731
G01 X68.57621 Y11.25406
G01 X68.43790 Y11.32800
G01 X68.35802 Y11.38137
G01 X68.23679 Y11.48086
G01 X68.16887 Y11.54878
G01 X68.06935 Y11.67001
G01 X68.01601 Y11.74987
G01 X67.94210 Y11.88818
G01 X67.90534 Y11.97692
G01 X67.85980 Y12.12701
G01 X67.84108 Y12.22122
G01 X67.82569 Y12.37728
G01 X67.82569 Y12.47334
G01 X67.84108 Y12.62942
G01 X67.85980 Y12.72363
G01 X67.90534 Y12.87370
G01 X67.94210 Y12.96244
G01 X68.01601 Y13.10075
G01 X68.06935 Y13.18063
G01 X68.16887 Y13.30186
G01 X68.23679 Y13.36978
G01 X68.27334 Y13.39975
G01 X68.27334 Y13.93158
G01 X67.11174 Y15.09312
G01 X64.45846 Y15.09312
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.26756 Y11.02473 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.26756 Y11.02473
G01 X62.35044 Y11.00824
G01 X62.50053 Y10.96273
G01 X62.58927 Y10.92595
G01 X62.72758 Y10.85203
G01 X62.80744 Y10.79867
G01 X62.92867 Y10.69918
G01 X62.99659 Y10.63126
G01 X63.09608 Y10.51002
G01 X63.14945 Y10.43016
G01 X63.22339 Y10.29184
G01 X63.26014 Y10.20309
G01 X63.30566 Y10.05303
G01 X63.32440 Y9.95882
G01 X63.33977 Y9.80273
G01 X63.33977 Y9.70670
G01 X63.32440 Y9.55061
G01 X63.30566 Y9.45640
G01 X63.26014 Y9.30632
G01 X63.22339 Y9.21759
G01 X63.14945 Y9.07927
G01 X63.09608 Y8.99941
G01 X62.99659 Y8.87817
G01 X62.92867 Y8.81025
G01 X62.80744 Y8.71076
G01 X62.72758 Y8.65740
G01 X62.58927 Y8.58346
G01 X62.50053 Y8.54670
G01 X62.35044 Y8.50119
G01 X62.25623 Y8.48244
G01 X62.10017 Y8.46707
G01 X62.00411 Y8.46707
G01 X61.84803 Y8.48244
G01 X61.75382 Y8.50119
G01 X61.60375 Y8.54670
G01 X61.58801 Y8.55323
G01 X61.51501 Y8.58346
G01 X61.37670 Y8.65740
G01 X61.29682 Y8.71076
G01 X61.17559 Y8.81025
G01 X61.10767 Y8.87817
G01 X61.00818 Y8.99941
G01 X60.95481 Y9.07927
G01 X60.88090 Y9.21759
G01 X60.84414 Y9.30632
G01 X60.79860 Y9.45640
G01 X60.77988 Y9.55061
G01 X60.76449 Y9.70670
G01 X60.76449 Y9.80273
G01 X60.77988 Y9.95882
G01 X60.79860 Y10.05303
G01 X60.84414 Y10.20309
G01 X60.88090 Y10.29184
G01 X60.95481 Y10.43016
G01 X61.00818 Y10.51002
G01 X61.10767 Y10.63126
G01 X61.17559 Y10.69918
G01 X61.29682 Y10.79867
G01 X61.37670 Y10.85203
G01 X61.51501 Y10.92595
G01 X61.60375 Y10.96273
G01 X61.75382 Y11.00824
G01 X61.83655 Y11.02473
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.99293 Y7.00332 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.99293 Y7.00332
G01 X64.01736 Y7.06235
G01 X64.14673 Y7.30439
G01 X64.20012 Y7.38427
G01 X64.23794 Y7.43035
G01 X64.37421 Y7.59641
G01 X64.44213 Y7.66433
G01 X64.65429 Y7.83845
G01 X64.73415 Y7.89182
G01 X64.97619 Y8.02118
G01 X65.06494 Y8.05796
G01 X65.32757 Y8.13761
G01 X65.42178 Y8.15636
G01 X65.69491 Y8.18326
G01 X65.79097 Y8.18326
G01 X66.06410 Y8.15636
G01 X66.15830 Y8.13761
G01 X66.42094 Y8.05796
G01 X66.50969 Y8.02118
G01 X66.75170 Y7.89182
G01 X66.83158 Y7.83845
G01 X67.04375 Y7.66433
G01 X67.11167 Y7.59641
G01 X67.28573 Y7.38427
G01 X67.33913 Y7.30439
G01 X67.46851 Y7.06235
G01 X67.49292 Y7.00335
G01 X67.49292 Y4.88781
G01 X67.51022 Y4.84600
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.49292 Y4.88781 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.49292 Y4.88781
G01 X67.47583 Y4.84653
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X63.99293 Y4.88778 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X63.99293 Y4.88778
G01 X63.97584 Y4.84653
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.01025 Y4.84597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.01025 Y4.84597
G01 X63.99293 Y4.88778
G01 X63.99293 Y7.00332
G01 X63.96852 Y7.06235
G01 X63.83913 Y7.30439
G01 X63.78577 Y7.38427
G01 X63.61165 Y7.59641
G01 X63.54373 Y7.66433
G01 X63.33159 Y7.83845
G01 X63.25173 Y7.89182
G01 X63.00967 Y8.02118
G01 X62.92092 Y8.05796
G01 X62.69687 Y8.12593
G01 X62.65831 Y8.13761
G01 X62.56410 Y8.15636
G01 X62.29098 Y8.18326
G01 X62.19491 Y8.18326
G01 X61.92179 Y8.15636
G01 X61.82758 Y8.13761
G01 X61.56494 Y8.05796
G01 X61.47620 Y8.02118
G01 X61.23416 Y7.89182
G01 X61.15428 Y7.83845
G01 X60.94214 Y7.66433
G01 X60.87422 Y7.59641
G01 X60.73792 Y7.43035
G01 X60.70010 Y7.38427
G01 X60.64673 Y7.30439
G01 X60.51737 Y7.06235
G01 X60.49294 Y7.00335
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.49294 Y6.96985 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.49294 Y6.96985
G01 X60.49291 Y6.68306
G01 X60.49294 Y6.60589
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.49294 Y4.88781 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.49294 Y4.88781
G01 X60.47582 Y4.84653
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.51026 Y4.84597 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.51026 Y4.84597
G01 X60.49294 Y4.88781
G01 X60.49294 Y7.00335
G01 X60.46850 Y7.06235
G01 X60.33914 Y7.30439
G01 X60.28577 Y7.38427
G01 X60.11166 Y7.59641
G01 X60.04374 Y7.66433
G01 X59.83160 Y7.83845
G01 X59.75171 Y7.89182
G01 X59.50968 Y8.02118
G01 X59.42093 Y8.05796
G01 X59.15829 Y8.13761
G01 X59.06408 Y8.15636
G01 X58.99840 Y8.16283
G01 X58.79096 Y8.18326
G01 X58.69492 Y8.18326
G01 X58.62558 Y8.17642
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X58.62174 Y8.62349 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X58.62174 Y8.62349
G01 X58.63312 Y8.59674
G01 X58.65108 Y8.53825
G01 X58.67077 Y8.43769
G01 X58.66909 Y8.33525
G01 X58.64615 Y8.23540
G01 X58.62629 Y8.17751
G01 X58.62586 Y8.17660
G01 X58.62558 Y8.17642
G01 X58.43168 Y8.05567
G01 X58.37732 Y8.03068
G01 X58.36218 Y8.02351
G01 X58.32152 Y8.00373
G01 X58.21113 Y7.96078
G01 X58.20770 Y7.95976
G01 X58.20102 Y7.95783
G01 X58.18065 Y7.95201
G01 X58.10526 Y7.92504
G01 X58.04166 Y7.89870
G01 X57.96927 Y7.86446
G01 X57.79927 Y7.76997
G01 X57.76950 Y7.75247
G01 X57.74191 Y7.73167
G01 X57.58959 Y7.61076
G01 X57.53025 Y7.55699
G01 X57.48156 Y7.50830
G01 X57.42779 Y7.44897
G01 X57.30689 Y7.29662
G01 X57.28608 Y7.26906
G01 X57.26856 Y7.23926
G01 X57.17410 Y7.06929
G01 X57.13986 Y6.99687
G01 X57.11352 Y6.93330
G01 X57.08654 Y6.85788
G01 X57.05065 Y6.73228
G01 X57.03313 Y6.67089
G01 X57.02446 Y6.63744
G01 X57.01966 Y6.60322
G01 X56.99746 Y6.41006
G01 X56.99353 Y6.33002
G01 X56.99266 Y6.29560
G01 X56.99266 Y5.59560
G01 X56.99353 Y5.56121
G01 X56.99746 Y5.48118
G01 X57.00257 Y5.43668
G01 X57.01966 Y5.28801
G01 X57.02446 Y5.25380
G01 X57.03313 Y5.22035
G01 X57.05850 Y5.13155
G01 X57.08654 Y5.03335
G01 X57.11352 Y4.95794
G01 X57.13983 Y4.89439
G01 X57.17410 Y4.82197
G01 X57.26622 Y4.65619
G01 X57.26856 Y4.65199
G01 X57.28606 Y4.62220
G01 X57.30689 Y4.59459
G01 X57.42779 Y4.44227
G01 X57.48159 Y4.38293
G01 X57.53023 Y4.33429
G01 X57.58959 Y4.28049
G01 X57.74189 Y4.15959
G01 X57.76950 Y4.13879
G01 X57.79929 Y4.12126
G01 X57.96927 Y4.02680
G01 X58.04168 Y3.99256
G01 X58.10523 Y3.96622
G01 X58.10983 Y3.96459
G01 X58.18067 Y3.93922
G01 X58.36764 Y3.88583
G01 X58.40109 Y3.87717
G01 X58.43531 Y3.87237
G01 X58.62853 Y3.85014
G01 X58.70851 Y3.84621
G01 X58.77732 Y3.84621
G01 X58.85733 Y3.85014
G01 X59.05052 Y3.87237
G01 X59.08473 Y3.87717
G01 X59.11819 Y3.88583
G01 X59.30518 Y3.93922
G01 X59.38059 Y3.96622
G01 X59.44417 Y3.99256
G01 X59.51659 Y4.02680
G01 X59.68656 Y4.12126
G01 X59.71636 Y4.13879
G01 X59.74392 Y4.15959
G01 X59.89626 Y4.28049
G01 X59.95560 Y4.33427
G01 X60.00429 Y4.38296
G01 X60.05806 Y4.44227
G01 X60.13431 Y4.53836
G01 X60.18179 Y4.59230
G01 X60.20978 Y4.62103
G01 X60.23152 Y4.64435
G01 X60.25214 Y4.66739
G01 X60.45700 Y4.83503
G01 X60.47582 Y4.84653
G01 X60.47762 Y4.84763
G01 X60.47815 Y4.84796
G01 X60.50843 Y4.84717
G01 X60.51026 Y4.84597
G01 X60.51028 Y4.84595
G01 X60.52799 Y4.83457
G01 X60.53830 Y4.82819
G01 X60.74419 Y4.65672
G01 X60.75476 Y4.64458
G01 X60.78278 Y4.61415
G01 X60.80406 Y4.59230
G01 X60.85153 Y4.53836
G01 X60.92778 Y4.44227
G01 X60.98156 Y4.38296
G01 X61.03025 Y4.33427
G01 X61.08958 Y4.28049
G01 X61.24193 Y4.15959
G01 X61.26949 Y4.13879
G01 X61.29928 Y4.12126
G01 X61.46924 Y4.02680
G01 X61.54168 Y3.99256
G01 X61.60525 Y3.96622
G01 X61.60983 Y3.96459
G01 X61.68069 Y3.93922
G01 X61.86766 Y3.88583
G01 X61.90111 Y3.87717
G01 X61.93533 Y3.87237
G01 X62.12852 Y3.85014
G01 X62.20853 Y3.84621
G01 X62.27734 Y3.84621
G01 X62.35732 Y3.85014
G01 X62.55054 Y3.87237
G01 X62.58475 Y3.87717
G01 X62.61821 Y3.88583
G01 X62.80517 Y3.93922
G01 X62.88061 Y3.96622
G01 X62.94416 Y3.99253
G01 X63.01658 Y4.02680
G01 X63.18656 Y4.12126
G01 X63.21638 Y4.13879
G01 X63.24396 Y4.15959
G01 X63.39628 Y4.28049
G01 X63.45562 Y4.33429
G01 X63.50426 Y4.38293
G01 X63.55806 Y4.44227
G01 X63.63431 Y4.53833
G01 X63.68178 Y4.59228
G01 X63.70977 Y4.62101
G01 X63.73156 Y4.64437
G01 X63.75214 Y4.66739
G01 X63.95704 Y4.83505
G01 X63.97584 Y4.84653
G01 X63.97815 Y4.84796
G01 X64.00842 Y4.84717
G01 X64.01025 Y4.84597
G01 X64.01028 Y4.84595
G01 X64.02798 Y4.83457
G01 X64.03829 Y4.82819
G01 X64.24419 Y4.65672
G01 X64.25475 Y4.64458
G01 X64.28277 Y4.61415
G01 X64.30408 Y4.59228
G01 X64.35150 Y4.53838
G01 X64.42780 Y4.44229
G01 X64.48160 Y4.38293
G01 X64.53024 Y4.33429
G01 X64.58958 Y4.28049
G01 X64.74190 Y4.15959
G01 X64.76948 Y4.13879
G01 X64.79928 Y4.12126
G01 X64.96925 Y4.02680
G01 X65.04167 Y3.99256
G01 X65.10525 Y3.96622
G01 X65.10984 Y3.96457
G01 X65.18068 Y3.93922
G01 X65.36765 Y3.88583
G01 X65.40111 Y3.87717
G01 X65.43532 Y3.87237
G01 X65.62854 Y3.85014
G01 X65.70852 Y3.84621
G01 X65.77733 Y3.84621
G01 X65.85731 Y3.85014
G01 X66.05053 Y3.87237
G01 X66.08475 Y3.87717
G01 X66.11820 Y3.88583
G01 X66.30517 Y3.93922
G01 X66.38061 Y3.96622
G01 X66.44418 Y3.99256
G01 X66.51655 Y4.02680
G01 X66.68657 Y4.12126
G01 X66.71634 Y4.13879
G01 X66.74393 Y4.15959
G01 X66.89628 Y4.28049
G01 X66.95561 Y4.33429
G01 X67.00425 Y4.38293
G01 X67.05802 Y4.44227
G01 X67.13430 Y4.53833
G01 X67.18177 Y4.59228
G01 X67.20981 Y4.62108
G01 X67.23153 Y4.64435
G01 X67.25218 Y4.66746
G01 X67.45701 Y4.83505
G01 X67.47583 Y4.84653
G01 X67.47763 Y4.84763
G01 X67.47814 Y4.84796
G01 X67.50844 Y4.84717
G01 X67.51022 Y4.84600
G01 X67.51025 Y4.84597
G01 X67.52795 Y4.83460
G01 X67.53831 Y4.82819
G01 X67.74420 Y4.65669
G01 X67.75472 Y4.64460
G01 X67.78279 Y4.61415
G01 X67.80407 Y4.59228
G01 X67.85154 Y4.53833
G01 X67.92777 Y4.44227
G01 X67.98159 Y4.38293
G01 X68.03023 Y4.33429
G01 X68.08957 Y4.28049
G01 X68.24187 Y4.15959
G01 X68.26948 Y4.13879
G01 X68.29927 Y4.12126
G01 X68.46925 Y4.02680
G01 X68.54166 Y3.99256
G01 X68.60524 Y3.96622
G01 X68.60981 Y3.96459
G01 X68.68068 Y3.93922
G01 X68.86765 Y3.88583
G01 X68.90107 Y3.87717
G01 X68.93531 Y3.87237
G01 X69.12853 Y3.85014
G01 X69.20849 Y3.84621
G01 X69.27732 Y3.84621
G01 X69.35728 Y3.85014
G01 X69.55053 Y3.87237
G01 X69.58474 Y3.87717
G01 X69.61819 Y3.88583
G01 X69.80516 Y3.93922
G01 X69.88060 Y3.96622
G01 X69.94417 Y3.99256
G01 X70.01656 Y4.02680
G01 X70.18654 Y4.12126
G01 X70.21636 Y4.13879
G01 X70.24392 Y4.15959
G01 X70.39627 Y4.28049
G01 X70.45558 Y4.33427
G01 X70.50430 Y4.38296
G01 X70.55807 Y4.44229
G01 X70.63434 Y4.53838
G01 X70.68179 Y4.59230
G01 X70.70971 Y4.62096
G01 X70.73152 Y4.64435
G01 X70.75207 Y4.66731
G01 X70.95700 Y4.83503
G01 X70.97582 Y4.84651
G01 X70.97760 Y4.84760
G01 X70.97816 Y4.84796
G01 X71.00843 Y4.84717
G01 X71.02792 Y4.83460
G01 X71.03828 Y4.82822
G01 X71.24410 Y4.65680
G01 X71.25471 Y4.64460
G01 X71.28270 Y4.61420
G01 X71.30407 Y4.59228
G01 X71.35154 Y4.53833
G01 X71.42779 Y4.44227
G01 X71.48159 Y4.38293
G01 X71.53025 Y4.33427
G01 X71.58959 Y4.28049
G01 X71.74194 Y4.15959
G01 X71.76950 Y4.13879
G01 X71.79929 Y4.12126
G01 X71.96927 Y4.02680
G01 X72.04168 Y3.99256
G01 X72.10523 Y3.96622
G01 X72.10983 Y3.96459
G01 X72.18067 Y3.93922
G01 X72.36764 Y3.88583
G01 X72.40112 Y3.87714
G01 X72.43531 Y3.87237
G01 X72.62852 Y3.85014
G01 X72.70853 Y3.84621
G01 X72.77734 Y3.84621
G01 X72.85733 Y3.85014
G01 X73.05054 Y3.87237
G01 X73.08473 Y3.87714
G01 X73.11821 Y3.88583
G01 X73.30520 Y3.93925
G01 X73.38062 Y3.96622
G01 X73.44417 Y3.99256
G01 X73.51658 Y4.02680
G01 X73.68656 Y4.12126
G01 X73.71635 Y4.13879
G01 X73.74391 Y4.15959
G01 X73.89626 Y4.28049
G01 X73.95560 Y4.33427
G01 X74.00426 Y4.38293
G01 X74.05806 Y4.44227
G01 X74.13431 Y4.53833
G01 X74.18178 Y4.59228
G01 X74.20977 Y4.62101
G01 X74.23157 Y4.64437
G01 X74.25214 Y4.66739
G01 X74.45704 Y4.83505
G01 X74.47581 Y4.84653
G01 X74.47762 Y4.84763
G01 X74.47815 Y4.84796
G01 X74.50843 Y4.84717
G01 X74.51026 Y4.84597
G01 X74.51028 Y4.84595
G01 X74.52799 Y4.83457
G01 X74.53830 Y4.82819
G01 X74.74419 Y4.65672
G01 X74.75476 Y4.64458
G01 X74.78277 Y4.61415
G01 X74.80406 Y4.59230
G01 X74.85151 Y4.53838
G01 X74.92778 Y4.44229
G01 X74.98155 Y4.38296
G01 X75.03025 Y4.33427
G01 X75.08958 Y4.28049
G01 X75.24193 Y4.15959
G01 X75.26949 Y4.13879
G01 X75.29928 Y4.12126
G01 X75.46923 Y4.02680
G01 X75.54167 Y3.99256
G01 X75.60525 Y3.96622
G01 X75.60982 Y3.96459
G01 X75.68069 Y3.93922
G01 X75.86766 Y3.88583
G01 X75.90111 Y3.87717
G01 X75.93532 Y3.87237
G01 X76.12854 Y3.85014
G01 X76.20853 Y3.84621
G01 X76.27733 Y3.84621
G01 X76.35732 Y3.85014
G01 X76.55054 Y3.87237
G01 X76.58475 Y3.87717
G01 X76.61820 Y3.88583
G01 X76.80517 Y3.93922
G01 X76.88061 Y3.96622
G01 X76.94419 Y3.99256
G01 X77.01658 Y4.02680
G01 X77.18658 Y4.12126
G01 X77.21637 Y4.13879
G01 X77.24396 Y4.15959
G01 X77.39628 Y4.28049
G01 X77.45562 Y4.33429
G01 X77.50426 Y4.38293
G01 X77.55805 Y4.44227
G01 X77.63430 Y4.53833
G01 X77.68178 Y4.59228
G01 X77.70977 Y4.62101
G01 X77.73156 Y4.64437
G01 X77.75213 Y4.66739
G01 X77.95704 Y4.83505
G01 X77.97583 Y4.84653
G01 X77.97814 Y4.84796
G01 X78.00845 Y4.84714
G01 X78.02795 Y4.83460
G01 X78.03829 Y4.82822
G01 X78.24411 Y4.65680
G01 X78.25472 Y4.64460
G01 X78.28272 Y4.61420
G01 X78.30408 Y4.59228
G01 X78.35155 Y4.53833
G01 X78.42780 Y4.44227
G01 X78.48160 Y4.38293
G01 X78.53024 Y4.33429
G01 X78.58957 Y4.28049
G01 X78.74190 Y4.15959
G01 X78.76948 Y4.13879
G01 X78.79928 Y4.12126
G01 X78.96928 Y4.02680
G01 X79.04167 Y3.99256
G01 X79.10524 Y3.96622
G01 X79.10984 Y3.96457
G01 X79.18068 Y3.93922
G01 X79.36765 Y3.88583
G01 X79.40110 Y3.87717
G01 X79.43532 Y3.87237
G01 X79.62853 Y3.85014
G01 X79.70852 Y3.84621
G01 X79.77733 Y3.84621
G01 X79.85731 Y3.85014
G01 X80.05053 Y3.87237
G01 X80.08474 Y3.87717
G01 X80.11820 Y3.88583
G01 X80.30516 Y3.93922
G01 X80.38060 Y3.96622
G01 X80.44418 Y3.99256
G01 X80.51657 Y4.02680
G01 X80.68657 Y4.12126
G01 X80.71637 Y4.13879
G01 X80.74395 Y4.15959
G01 X80.89627 Y4.28049
G01 X80.95561 Y4.33429
G01 X81.00425 Y4.38293
G01 X81.05805 Y4.44229
G01 X81.13435 Y4.53838
G01 X81.18177 Y4.59228
G01 X81.20979 Y4.62103
G01 X81.23153 Y4.64435
G01 X81.25215 Y4.66739
G01 X81.45700 Y4.83503
G01 X81.47583 Y4.84651
G01 X81.47816 Y4.84796
G01 X81.50844 Y4.84717
G01 X81.52795 Y4.83460
G01 X81.53831 Y4.82819
G01 X81.74420 Y4.65669
G01 X81.75472 Y4.64460
G01 X81.78278 Y4.61415
G01 X81.80407 Y4.59228
G01 X81.85154 Y4.53833
G01 X81.92779 Y4.44227
G01 X81.98159 Y4.38293
G01 X82.03023 Y4.33429
G01 X82.08957 Y4.28049
G01 X82.24189 Y4.15959
G01 X82.26947 Y4.13879
G01 X82.29929 Y4.12126
G01 X82.46927 Y4.02680
G01 X82.54169 Y3.99256
G01 X82.60524 Y3.96622
G01 X82.60983 Y3.96459
G01 X82.68067 Y3.93922
G01 X82.86764 Y3.88583
G01 X82.90110 Y3.87717
G01 X82.93531 Y3.87237
G01 X83.12853 Y3.85014
G01 X83.20851 Y3.84621
G01 X83.27732 Y3.84621
G01 X83.35733 Y3.85014
G01 X83.55052 Y3.87237
G01 X83.58474 Y3.87717
G01 X83.61819 Y3.88583
G01 X83.80518 Y3.93922
G01 X83.88060 Y3.96622
G01 X83.94417 Y3.99256
G01 X84.01659 Y4.02680
G01 X84.18656 Y4.12126
G01 X84.21636 Y4.13879
G01 X84.24392 Y4.15959
G01 X84.39627 Y4.28049
G01 X84.45560 Y4.33427
G01 X84.50429 Y4.38296
G01 X84.55806 Y4.44227
G01 X84.67897 Y4.59462
G01 X84.69977 Y4.62220
G01 X84.71727 Y4.65197
G01 X84.81176 Y4.82197
G01 X84.84600 Y4.89436
G01 X84.87234 Y4.95796
G01 X84.89931 Y5.03335
G01 X84.95270 Y5.22037
G01 X84.96139 Y5.25382
G01 X84.96617 Y5.28801
G01 X84.98839 Y5.48120
G01 X84.99233 Y5.56121
G01 X84.99317 Y5.59560
G01 X84.99317 Y6.29560
G01 X84.99233 Y6.33002
G01 X84.98839 Y6.41003
G01 X84.96617 Y6.60322
G01 X84.96137 Y6.63744
G01 X84.95270 Y6.67086
G01 X84.89931 Y6.85788
G01 X84.87234 Y6.93327
G01 X84.84600 Y6.99690
G01 X84.81176 Y7.06929
G01 X84.71727 Y7.23929
G01 X84.69977 Y7.26903
G01 X84.68717 Y7.28605
G01 X84.68280 Y7.29174
G01 X84.67897 Y7.29659
G01 X84.55806 Y7.44897
G01 X84.50429 Y7.50830
G01 X84.45560 Y7.55699
G01 X84.39627 Y7.61076
G01 X84.29921 Y7.68778
G01 X84.24389 Y7.73167
G01 X84.21638 Y7.75245
G01 X84.18659 Y7.76997
G01 X84.01659 Y7.86446
G01 X83.94420 Y7.89870
G01 X83.88057 Y7.92504
G01 X83.80518 Y7.95201
G01 X83.61816 Y8.00540
G01 X83.57689 Y8.01587
G01 X83.55080 Y8.02163
G01 X83.46637 Y8.04571
G01 X83.40694 Y8.06654
G01 X83.28479 Y8.12077
G01 X83.19635 Y8.16840
G01 X83.17681 Y8.17970
G01 X83.17679 Y8.17970
G01 X83.17420 Y8.18122
G01 X82.92177 Y8.15636
G01 X82.82756 Y8.13761
G01 X82.56495 Y8.05796
G01 X82.47620 Y8.02118
G01 X82.23414 Y7.89182
G01 X82.15428 Y7.83845
G01 X81.94214 Y7.66433
G01 X81.87422 Y7.59641
G01 X81.73793 Y7.43035
G01 X81.70011 Y7.38427
G01 X81.64674 Y7.30439
G01 X81.51735 Y7.06235
G01 X81.49295 Y7.00337
G01 X81.49292 Y6.96985
G01 X81.49292 Y4.92139
G01 X81.49295 Y4.88783
G01 X81.51029 Y4.84597
G01 X81.52795 Y4.83460
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.47583 Y4.84651 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.47583 Y4.84651
G01 X81.49295 Y4.88783
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.37952 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.37952 Y5.75433
G01 X87.41122 Y5.75433
G01 X87.44203 Y5.81199
G01 X87.49540 Y5.89184
G01 X87.64462 Y6.07368
G01 X87.71257 Y6.14163
G01 X87.89441 Y6.29085
G01 X87.97426 Y6.34422
G01 X88.03192 Y6.37503
G01 X88.03192 Y6.40670
G01 X88.01508 Y6.39840
G01 X87.82870 Y6.27386
G01 X87.66014 Y6.12606
G01 X87.51236 Y5.95753
G01 X87.38783 Y5.77117
G01 X87.37952 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.37952 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.37952 Y4.07432
G01 X87.41120 Y4.07432
G01 X87.44203 Y4.01664
G01 X87.49540 Y3.93678
G01 X87.64462 Y3.75494
G01 X87.71257 Y3.68700
G01 X87.89441 Y3.53777
G01 X87.97426 Y3.48441
G01 X88.03192 Y3.45360
G01 X88.03192 Y3.42192
G01 X88.01508 Y3.43023
G01 X87.82872 Y3.55479
G01 X87.66014 Y3.70259
G01 X87.51236 Y3.87112
G01 X87.38783 Y4.05748
G01 X87.37952 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.71193 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.71193 Y3.42192
G01 X89.72877 Y3.43023
G01 X89.91513 Y3.55477
G01 X90.08366 Y3.70254
G01 X90.23146 Y3.87110
G01 X90.35600 Y4.05748
G01 X90.36430 Y4.07432
G01 X90.33268 Y4.07432
G01 X90.30184 Y4.01664
G01 X90.24848 Y3.93678
G01 X90.09925 Y3.75494
G01 X90.03131 Y3.68700
G01 X89.84947 Y3.53777
G01 X89.76961 Y3.48441
G01 X89.71193 Y3.45357
G01 X89.71193 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.57052 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.57052 Y4.07432
G01 X91.60220 Y4.07432
G01 X91.63303 Y4.01664
G01 X91.68640 Y3.93678
G01 X91.83562 Y3.75494
G01 X91.90357 Y3.68700
G01 X92.08541 Y3.53777
G01 X92.16526 Y3.48441
G01 X92.22292 Y3.45360
G01 X92.22292 Y3.42192
G01 X92.20608 Y3.43023
G01 X92.01972 Y3.55479
G01 X91.85114 Y3.70259
G01 X91.70336 Y3.87112
G01 X91.57883 Y4.05748
G01 X91.57052 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X89.71193 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X89.71193 Y6.37505
G01 X89.71193 Y6.40670
G01 X89.72877 Y6.39840
G01 X89.91515 Y6.27389
G01 X90.08366 Y6.12611
G01 X90.23146 Y5.95755
G01 X90.35600 Y5.77117
G01 X90.36430 Y5.75433
G01 X90.33265 Y5.75433
G01 X90.30184 Y5.81199
G01 X90.24848 Y5.89184
G01 X90.09925 Y6.07368
G01 X90.03131 Y6.14163
G01 X89.84947 Y6.29085
G01 X89.76961 Y6.34422
G01 X89.71193 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.57052 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.57052 Y5.75433
G01 X91.57883 Y5.77117
G01 X91.70336 Y5.95753
G01 X91.85114 Y6.12606
G01 X92.01970 Y6.27386
G01 X92.20608 Y6.39840
G01 X92.22292 Y6.40670
G01 X92.22292 Y6.37503
G01 X92.16526 Y6.34422
G01 X92.08541 Y6.29085
G01 X91.90357 Y6.14163
G01 X91.83562 Y6.07368
G01 X91.68640 Y5.89184
G01 X91.63303 Y5.81199
G01 X91.60222 Y5.75433
G01 X91.57052 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.90293 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.90293 Y3.42192
G01 X93.91977 Y3.43023
G01 X94.10613 Y3.55477
G01 X94.27466 Y3.70254
G01 X94.42246 Y3.87110
G01 X94.54700 Y4.05748
G01 X94.55530 Y4.07432
G01 X94.52368 Y4.07432
G01 X94.49284 Y4.01664
G01 X94.43948 Y3.93678
G01 X94.29025 Y3.75494
G01 X94.22231 Y3.68700
G01 X94.04047 Y3.53777
G01 X93.96061 Y3.48441
G01 X93.90293 Y3.45357
G01 X93.90293 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.76152 Y4.07432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.76152 Y4.07432
G01 X95.79320 Y4.07432
G01 X95.82403 Y4.01664
G01 X95.87740 Y3.93678
G01 X96.02662 Y3.75494
G01 X96.09457 Y3.68700
G01 X96.27641 Y3.53777
G01 X96.35626 Y3.48441
G01 X96.41392 Y3.45360
G01 X96.41392 Y3.42192
G01 X96.39708 Y3.43023
G01 X96.21072 Y3.55479
G01 X96.04214 Y3.70259
G01 X95.89436 Y3.87112
G01 X95.76983 Y4.05748
G01 X95.76152 Y4.07432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.76152 Y5.75433 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.76152 Y5.75433
G01 X95.79322 Y5.75433
G01 X95.82403 Y5.81199
G01 X95.87740 Y5.89184
G01 X96.02662 Y6.07368
G01 X96.09457 Y6.14163
G01 X96.27641 Y6.29085
G01 X96.35626 Y6.34422
G01 X96.41392 Y6.37503
G01 X96.41392 Y6.40670
G01 X96.39708 Y6.39840
G01 X96.21070 Y6.27386
G01 X96.04214 Y6.12606
G01 X95.89436 Y5.95753
G01 X95.76983 Y5.77117
G01 X95.76152 Y5.75433
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.09393 Y3.42192 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.09393 Y3.42192
G01 X98.09393 Y3.45357
G01 X98.15161 Y3.48441
G01 X98.23147 Y3.53777
G01 X98.41331 Y3.68700
G01 X98.48125 Y3.75494
G01 X98.63048 Y3.93678
G01 X98.68384 Y4.01664
G01 X98.71468 Y4.07432
G01 X98.74630 Y4.07432
G01 X98.73800 Y4.05748
G01 X98.61346 Y3.87110
G01 X98.46566 Y3.70254
G01 X98.29713 Y3.55477
G01 X98.11077 Y3.43023
G01 X98.09393 Y3.42192
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X98.09393 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X98.09393 Y6.37505
G01 X98.09393 Y6.40670
G01 X98.11077 Y6.39840
G01 X98.29715 Y6.27389
G01 X98.46566 Y6.12611
G01 X98.61346 Y5.95755
G01 X98.73800 Y5.77117
G01 X98.74630 Y5.75433
G01 X98.71465 Y5.75433
G01 X98.68384 Y5.81199
G01 X98.63048 Y5.89184
G01 X98.48125 Y6.07368
G01 X98.41331 Y6.14163
G01 X98.23147 Y6.29085
G01 X98.15161 Y6.34422
G01 X98.09393 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.70366 Y8.79430 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.70366 Y8.79430
G01 X95.70366 Y11.19432
G01 X95.70485 Y11.23504
G01 X95.70689 Y11.25249
G01 X95.73335 Y11.33860
G01 X95.77722 Y11.41114
G01 X95.83711 Y11.47103
G01 X95.90966 Y11.51490
G01 X95.99576 Y11.54136
G01 X96.01321 Y11.54340
G01 X96.05390 Y11.54456
G01 X98.45395 Y11.54456
G01 X98.49464 Y11.54340
G01 X98.51209 Y11.54136
G01 X98.59819 Y11.51490
G01 X98.66990 Y11.47162
G01 X98.67076 Y11.47103
G01 X98.73063 Y11.41116
G01 X98.77145 Y11.34434
G01 X98.77450 Y11.33857
G01 X98.80096 Y11.25249
G01 X98.80299 Y11.23504
G01 X98.80419 Y11.19432
G01 X98.80419 Y8.79430
G01 X98.80299 Y8.75361
G01 X98.80096 Y8.73616
G01 X98.77450 Y8.65006
G01 X98.73063 Y8.57751
G01 X98.67074 Y8.51762
G01 X98.59819 Y8.47376
G01 X98.51209 Y8.44729
G01 X98.49461 Y8.44526
G01 X98.45395 Y8.44406
G01 X96.05390 Y8.44406
G01 X96.01321 Y8.44526
G01 X95.99576 Y8.44729
G01 X95.90966 Y8.47376
G01 X95.83711 Y8.51762
G01 X95.77719 Y8.57751
G01 X95.76119 Y8.60175
G01 X95.73338 Y8.65003
G01 X95.70689 Y8.73616
G01 X95.70485 Y8.75361
G01 X95.70366 Y8.79430
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.90293 Y6.37505 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.90293 Y6.37505
G01 X93.96061 Y6.34422
G01 X94.04047 Y6.29085
G01 X94.22231 Y6.14163
G01 X94.29025 Y6.07368
G01 X94.43948 Y5.89184
G01 X94.49284 Y5.81199
G01 X94.52365 Y5.75433
G01 X94.55530 Y5.75433
G01 X94.54700 Y5.77117
G01 X94.42246 Y5.95755
G01 X94.27466 Y6.12611
G01 X94.10615 Y6.27389
G01 X93.91977 Y6.39840
G01 X93.90293 Y6.40670
G01 X93.90293 Y6.37505
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.51266 Y8.79430 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.51266 Y8.79430
G01 X91.51385 Y8.75361
G01 X91.51589 Y8.73616
G01 X91.54238 Y8.65003
G01 X91.57019 Y8.60175
G01 X91.58619 Y8.57751
G01 X91.64611 Y8.51762
G01 X91.71865 Y8.47376
G01 X91.80476 Y8.44729
G01 X91.82221 Y8.44526
G01 X91.86290 Y8.44406
G01 X94.26295 Y8.44406
G01 X94.30361 Y8.44526
G01 X94.32109 Y8.44729
G01 X94.40719 Y8.47376
G01 X94.47974 Y8.51762
G01 X94.53963 Y8.57751
G01 X94.58350 Y8.65006
G01 X94.60996 Y8.73616
G01 X94.61199 Y8.75361
G01 X94.61319 Y8.79430
G01 X94.61319 Y11.19432
G01 X94.61199 Y11.23504
G01 X94.60996 Y11.25249
G01 X94.58350 Y11.33857
G01 X94.58045 Y11.34434
G01 X94.53963 Y11.41116
G01 X94.47976 Y11.47103
G01 X94.47890 Y11.47162
G01 X94.40719 Y11.51490
G01 X94.32109 Y11.54136
G01 X94.30364 Y11.54340
G01 X94.26295 Y11.54456
G01 X91.86290 Y11.54456
G01 X91.82221 Y11.54340
G01 X91.80476 Y11.54136
G01 X91.71865 Y11.51490
G01 X91.64611 Y11.47103
G01 X91.58622 Y11.41114
G01 X91.54235 Y11.33860
G01 X91.51589 Y11.25249
G01 X91.51385 Y11.23504
G01 X91.51266 Y11.19432
G01 X91.51266 Y8.79430
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.24267 Y16.58197 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.24267 Y16.58197
G01 X97.24267 Y18.98196
G01 X97.24384 Y19.02263
G01 X97.24590 Y19.04013
G01 X97.27236 Y19.12626
G01 X97.31621 Y19.19875
G01 X97.37615 Y19.25870
G01 X97.44864 Y19.30254
G01 X97.53477 Y19.32900
G01 X97.55227 Y19.33106
G01 X97.59294 Y19.33223
G01 X99.99293 Y19.33223
G01 X100.03357 Y19.33106
G01 X100.05107 Y19.32900
G01 X100.13721 Y19.30254
G01 X100.20970 Y19.25870
G01 X100.26964 Y19.19875
G01 X100.31348 Y19.12626
G01 X100.33995 Y19.04013
G01 X100.34201 Y19.02263
G01 X100.34317 Y18.98196
G01 X100.34317 Y16.58197
G01 X100.34201 Y16.54133
G01 X100.33995 Y16.52383
G01 X100.31348 Y16.43770
G01 X100.26964 Y16.36520
G01 X100.20970 Y16.30526
G01 X100.13721 Y16.26142
G01 X100.05107 Y16.23495
G01 X100.03357 Y16.23290
G01 X99.99293 Y16.23173
G01 X97.59294 Y16.23173
G01 X97.55227 Y16.23290
G01 X97.53477 Y16.23495
G01 X97.44862 Y16.26142
G01 X97.40538 Y16.28611
G01 X97.37617 Y16.30524
G01 X97.31623 Y16.36515
G01 X97.31504 Y16.36691
G01 X97.27236 Y16.43772
G01 X97.24590 Y16.52383
G01 X97.24384 Y16.54133
G01 X97.24267 Y16.58197
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X94.01360 Y18.12829 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X94.01360 Y18.12829
G01 X93.95462 Y18.09916
G01 X93.90590 Y18.00800
G01 X93.86912 Y17.91925
G01 X93.82711 Y17.78075
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.82713 Y17.16086 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.82713 Y17.16086
G01 X93.82713 Y16.80638
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.95424 Y16.84331 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.95424 Y16.84331
G01 X93.94509 Y16.84252
G01 X93.84446 Y16.82327
G01 X93.83574 Y16.81959
G01 X93.82713 Y16.80638
G01 X93.73895 Y16.67089
G01 X93.72947 Y16.65146
G01 X93.69848 Y16.59378
G01 X93.64034 Y16.49551
G01 X93.61385 Y16.45410
G01 X93.55391 Y16.39416
G01 X93.45210 Y16.33579
G01 X93.38558 Y16.30470
G01 X93.34756 Y16.28814
G01 X93.33712 Y16.28392
G01 X93.29330 Y16.26470
G01 X93.25584 Y16.11999
G01 X93.24616 Y16.05880
G01 X93.23737 Y15.94791
G01 X93.23737 Y14.64532
G01 X93.23653 Y14.61088
G01 X93.23483 Y14.57659
G01 X93.22980 Y14.54260
G01 X93.21639 Y14.47517
G01 X93.20803 Y14.44182
G01 X93.19648 Y14.40951
G01 X93.17014 Y14.34590
G01 X93.15543 Y14.31484
G01 X93.13780 Y14.28540
G01 X93.09953 Y14.22812
G01 X93.07908 Y14.20057
G01 X93.05599 Y14.17509
G01 X93.03227 Y14.15020
G01 X92.95911 Y14.07702
G01 X90.81487 Y11.93278
G01 X90.78998 Y11.90905
G01 X90.76450 Y11.88597
G01 X90.73694 Y11.86552
G01 X90.67967 Y11.82727
G01 X90.67129 Y11.82224
G01 X90.64472 Y11.80631
G01 X90.63606 Y11.80169
G01 X90.62016 Y11.79303
G01 X90.55823 Y11.75980
G01 X90.49755 Y11.72346
G01 X90.47972 Y11.71165
G01 X90.42790 Y11.67992
G01 X90.42336 Y11.67736
G01 X90.36290 Y11.64007
G01 X90.31975 Y11.61121
G01 X90.30941 Y11.60423
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.67190 Y11.63613 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.67190 Y11.63613
G01 X87.38229 Y11.58744
G01 X87.37393 Y11.58058
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X87.36045 Y11.59366 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X87.36045 Y11.59366
G01 X87.37015 Y11.58861
G01 X87.37152 Y11.58792
G01 X87.38508 Y11.58792
G01 X87.67190 Y11.63613
G01 X90.07195 Y11.63613
G01 X90.30941 Y11.60423
G01 X90.36796 Y11.43758
G01 X90.38678 Y11.37616
G01 X90.41530 Y11.26717
G01 X90.41896 Y11.25251
G01 X90.42099 Y11.23504
G01 X90.42219 Y11.19432
G01 X90.42219 Y8.79430
G01 X90.42099 Y8.75361
G01 X90.41896 Y8.73616
G01 X90.39250 Y8.65006
G01 X90.34863 Y8.57751
G01 X90.28874 Y8.51762
G01 X90.21619 Y8.47376
G01 X90.13009 Y8.44729
G01 X90.11261 Y8.44526
G01 X90.07195 Y8.44406
G01 X87.67190 Y8.44406
G01 X87.63121 Y8.44526
G01 X87.61376 Y8.44729
G01 X87.52765 Y8.47376
G01 X87.45511 Y8.51762
G01 X87.39519 Y8.57751
G01 X87.37919 Y8.60175
G01 X87.35138 Y8.65003
G01 X87.32489 Y8.73616
G01 X87.32285 Y8.75361
G01 X87.32169 Y8.79430
G01 X87.32169 Y11.19432
G01 X87.32285 Y11.23507
G01 X87.32313 Y11.23778
G01 X87.33088 Y11.30969
G01 X87.33637 Y11.35036
G01 X87.37416 Y11.58198
G01 X87.37015 Y11.58861
G01 X87.37015 Y11.58863
G01 X87.36045 Y11.59366
G01 X87.29926 Y11.62483
G01 X87.04658 Y11.70921
G01 X86.98539 Y11.71888
G01 X86.87452 Y11.72767
G01 X84.10000 Y11.72767
G01 X84.06546 Y11.72681
G01 X84.04582 Y11.72584
G01 X83.90325 Y11.70436
G01 X83.89782 Y11.69983
G01 X83.85012 Y11.65980
G01 X83.82162 Y11.63461
G01 X83.77092 Y11.58729
G01 X83.76741 Y11.58398
G01 X83.76513 Y11.58185
G01 X83.76147 Y11.57837
G01 X83.67729 Y11.51111
G01 X83.64966 Y11.48782
G01 X83.60170 Y11.44528
G01 X83.59678 Y11.44096
G01 X83.55921 Y11.40824
G01 X83.47935 Y11.32795
G01 X83.41804 Y11.25726
G01 X83.37536 Y11.20494
G01 X83.37112 Y11.19940
G01 X83.36934 Y11.14393
G01 X83.37158 Y11.11109
G01 X83.41778 Y11.05279
G01 X83.47948 Y10.98282
G01 X83.54565 Y10.91576
G01 X83.59246 Y10.87357
G01 X83.59683 Y10.86969
G01 X83.64966 Y10.82282
G01 X83.67729 Y10.79953
G01 X83.76142 Y10.73230
G01 X83.77092 Y10.72333
G01 X83.81865 Y10.67360
G01 X83.88961 Y10.59196
G01 X83.91847 Y10.55264
G01 X83.95641 Y10.49519
G01 X83.99337 Y10.43281
G01 X84.03025 Y10.35683
G01 X84.05725 Y10.29356
G01 X84.07003 Y10.25894
G01 X84.10221 Y10.14332
G01 X84.11743 Y10.07596
G01 X84.11760 Y10.07487
G01 X84.13168 Y9.91978
G01 X84.13394 Y9.88533
G01 X84.13168 Y9.85087
G01 X84.11760 Y9.69577
G01 X84.11743 Y9.69468
G01 X84.10221 Y9.62735
G01 X84.07003 Y9.51170
G01 X84.05725 Y9.47708
G01 X84.03025 Y9.41381
G01 X83.99337 Y9.33784
G01 X83.95641 Y9.27546
G01 X83.91847 Y9.21800
G01 X83.88961 Y9.17868
G01 X83.81865 Y9.09705
G01 X83.77092 Y9.04731
G01 X83.76142 Y9.03835
G01 X83.64907 Y8.94853
G01 X83.61189 Y8.92079
G01 X83.59208 Y8.90972
G01 X83.47889 Y8.84884
G01 X83.45423 Y8.83494
G01 X83.40183 Y8.80398
G01 X83.39325 Y8.79898
G01 X83.35840 Y8.77904
G01 X83.25644 Y8.70962
G01 X83.18212 Y8.65054
G01 X83.15479 Y8.62809
G01 X83.13066 Y8.60761
G01 X83.02977 Y8.59768
G01 X82.93371 Y8.59768
G01 X82.77763 Y8.61305
G01 X82.68342 Y8.63179
G01 X82.53335 Y8.67731
G01 X82.44461 Y8.71406
G01 X82.30630 Y8.78800
G01 X82.22642 Y8.84137
G01 X82.10519 Y8.94086
G01 X82.03727 Y9.00878
G01 X81.93778 Y9.13001
G01 X81.88441 Y9.20987
G01 X81.81050 Y9.34818
G01 X81.77374 Y9.43692
G01 X81.72820 Y9.58701
G01 X81.70948 Y9.68122
G01 X81.69409 Y9.83728
G01 X81.69409 Y9.93334
G01 X81.70948 Y10.08942
G01 X81.72820 Y10.18363
G01 X81.77374 Y10.33370
G01 X81.81050 Y10.42244
G01 X81.88441 Y10.56075
G01 X81.93778 Y10.64063
G01 X82.03727 Y10.76186
G01 X82.10519 Y10.82978
G01 X82.22642 Y10.92927
G01 X82.30630 Y10.98264
G01 X82.44461 Y11.05655
G01 X82.53335 Y11.09331
G01 X82.68342 Y11.13885
G01 X82.76620 Y11.15533
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.19721 Y11.15533 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.19721 Y11.15533
G01 X82.76620 Y11.15533
G01 X82.68342 Y11.17179
G01 X82.53335 Y11.21731
G01 X82.44461 Y11.25406
G01 X82.30630 Y11.32800
G01 X82.22642 Y11.38137
G01 X82.10519 Y11.48086
G01 X82.03727 Y11.54878
G01 X81.93778 Y11.67001
G01 X81.88441 Y11.74987
G01 X81.81050 Y11.88818
G01 X81.77374 Y11.97692
G01 X81.72820 Y12.12701
G01 X81.70948 Y12.22122
G01 X81.69409 Y12.37728
G01 X81.69409 Y12.47334
G01 X81.70948 Y12.62942
G01 X81.72820 Y12.72363
G01 X81.77374 Y12.87370
G01 X81.81050 Y12.96244
G01 X81.88441 Y13.10075
G01 X81.93778 Y13.18063
G01 X82.03727 Y13.30186
G01 X82.10519 Y13.36978
G01 X82.22642 Y13.46927
G01 X82.30630 Y13.52264
G01 X82.44461 Y13.59655
G01 X82.53335 Y13.63331
G01 X82.68342 Y13.67885
G01 X82.77763 Y13.69757
G01 X82.93371 Y13.71296
G01 X83.02977 Y13.71296
G01 X83.18583 Y13.69757
G01 X83.28004 Y13.67885
G01 X83.43013 Y13.63331
G01 X83.51887 Y13.59655
G01 X83.65718 Y13.52264
G01 X83.73704 Y13.46927
G01 X83.85827 Y13.36978
G01 X83.92619 Y13.30186
G01 X83.94910 Y13.27395
G01 X83.95405 Y13.26790
G01 X85.39286 Y13.26790
G01 X85.40081 Y13.26219
G01 X85.46200 Y13.23102
G01 X85.71468 Y13.14664
G01 X85.77587 Y13.13697
G01 X85.88676 Y13.12818
G01 X89.84360 Y13.12818
G01 X89.87111 Y13.12871
G01 X89.88665 Y13.12932
G01 X90.02163 Y13.14761
G01 X90.02643 Y13.15109
G01 X90.07654 Y13.18749
G01 X90.16125 Y13.25975
G01 X91.70529 Y14.80379
G01 X91.72442 Y14.82368
G01 X91.73496 Y14.83511
G01 X91.81744 Y14.94344
G01 X91.81840 Y14.94938
G01 X91.82808 Y15.01057
G01 X91.83687 Y15.12144
G01 X91.83687 Y15.94791
G01 X91.83339 Y16.01783
G01 X91.82948 Y16.05703
G01 X91.78386 Y16.25017
G01 X91.77913 Y16.26289
G01 X91.73712 Y16.28207
G01 X91.73067 Y16.28507
G01 X91.62214 Y16.33579
G01 X91.52036 Y16.39414
G01 X91.46041 Y16.45408
G01 X91.44733 Y16.47371
G01 X91.41657 Y16.52662
G01 X91.39011 Y16.61270
G01 X91.38807 Y16.63018
G01 X91.38688 Y16.67089
G01 X91.38688 Y18.27087
G01 X91.38807 Y18.31158
G01 X91.39011 Y18.32906
G01 X91.41655 Y18.41514
G01 X91.46041 Y18.48768
G01 X91.52033 Y18.54760
G01 X91.59285 Y18.59144
G01 X91.67898 Y18.61791
G01 X91.69646 Y18.61996
G01 X91.73715 Y18.62113
G01 X93.33712 Y18.62113
G01 X93.37778 Y18.61996
G01 X93.39526 Y18.61791
G01 X93.48141 Y18.59144
G01 X93.53778 Y18.55842
G01 X93.55393 Y18.54760
G01 X93.61385 Y18.48765
G01 X93.64034 Y18.44625
G01 X93.67951 Y18.38003
G01 X93.70072 Y18.34165
G01 X93.73719 Y18.27087
G01 X93.82713 Y18.12898
G01 X93.82764 Y18.12819
G01 X93.83341 Y18.12596
G01 X93.89218 Y18.10899
G01 X93.95271 Y18.09820
G01 X93.95459 Y18.09911
G01 X94.01360 Y18.12829
G01 X94.09508 Y18.17536
G01 X94.15957 Y18.21661
G01 X94.21136 Y18.25324
G01 X94.23044 Y18.26718
G01 X94.28708 Y18.30993
G01 X94.30252 Y18.32192
G01 X94.40973 Y18.40764
G01 X94.44695 Y18.43541
G01 X94.46678 Y18.44651
G01 X94.60491 Y18.52078
G01 X94.61438 Y18.52578
G01 X94.66902 Y18.54597
G01 X94.79459 Y18.58656
G01 X94.81885 Y18.59225
G01 X94.88667 Y18.60465
G01 X94.98215 Y18.61732
G01 X95.04273 Y18.62029
G01 X95.11154 Y18.62029
G01 X95.17212 Y18.61732
G01 X95.26757 Y18.60465
G01 X95.33536 Y18.59225
G01 X95.35964 Y18.58656
G01 X95.48522 Y18.54597
G01 X95.53986 Y18.52578
G01 X95.54938 Y18.52075
G01 X95.68748 Y18.44648
G01 X95.70729 Y18.43541
G01 X95.74448 Y18.40764
G01 X95.85685 Y18.31786
G01 X95.86632 Y18.30889
G01 X95.91405 Y18.25916
G01 X95.98502 Y18.17752
G01 X96.01387 Y18.13820
G01 X96.05182 Y18.08075
G01 X96.08878 Y18.01836
G01 X96.12566 Y17.94239
G01 X96.15266 Y17.87912
G01 X96.16543 Y17.84450
G01 X96.19761 Y17.72885
G01 X96.21283 Y17.66152
G01 X96.21301 Y17.66043
G01 X96.22708 Y17.50533
G01 X96.22934 Y17.47087
G01 X96.22708 Y17.43642
G01 X96.21301 Y17.28133
G01 X96.21283 Y17.28024
G01 X96.19761 Y17.21288
G01 X96.16543 Y17.09726
G01 X96.15266 Y17.06264
G01 X96.12566 Y16.99937
G01 X96.08878 Y16.92340
G01 X96.05182 Y16.86101
G01 X96.01387 Y16.80356
G01 X95.98502 Y16.76424
G01 X95.91405 Y16.68260
G01 X95.86632 Y16.63287
G01 X95.85682 Y16.62390
G01 X95.74448 Y16.53409
G01 X95.70729 Y16.50633
G01 X95.68753 Y16.49530
G01 X95.54941 Y16.42101
G01 X95.53983 Y16.41595
G01 X95.48517 Y16.39574
G01 X95.35964 Y16.35517
G01 X95.33531 Y16.34948
G01 X95.26757 Y16.33709
G01 X95.17214 Y16.32444
G01 X95.11154 Y16.32147
G01 X95.04273 Y16.32147
G01 X94.98212 Y16.32444
G01 X94.88667 Y16.33709
G01 X94.81890 Y16.34948
G01 X94.79459 Y16.35517
G01 X94.66907 Y16.39574
G01 X94.61438 Y16.41595
G01 X94.60486 Y16.42098
G01 X94.52452 Y16.46421
G01 X94.46673 Y16.49528
G01 X94.44689 Y16.50638
G01 X94.40973 Y16.53411
G01 X94.30255 Y16.61981
G01 X94.28708 Y16.63183
G01 X94.24093 Y16.66668
G01 X94.23054 Y16.67465
G01 X94.20666 Y16.69335
G01 X94.09516 Y16.76645
G01 X94.01136 Y16.81227
G01 X94.00892 Y16.81359
G01 X93.95424 Y16.84331
G01 X93.90590 Y16.93373
G01 X93.86912 Y17.02248
G01 X93.82713 Y17.16086
G01 X93.82533 Y17.17310
G01 X93.81596 Y17.26787
G01 X93.80826 Y17.42472
G01 X93.80826 Y17.51704
G01 X93.81596 Y17.67386
G01 X93.82533 Y17.76861
G01 X93.82711 Y17.78075
G01 X93.82713 Y18.12898
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.30053 Y22.02196 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.30053 Y22.02196
G01 X97.33221 Y22.02196
G01 X97.36304 Y21.96430
G01 X97.41641 Y21.88442
G01 X97.56563 Y21.70258
G01 X97.63355 Y21.63466
G01 X97.81539 Y21.48541
G01 X97.89527 Y21.43205
G01 X97.95293 Y21.40124
G01 X97.95293 Y21.36959
G01 X97.93609 Y21.37789
G01 X97.74968 Y21.50243
G01 X97.58118 Y21.65021
G01 X97.43338 Y21.81876
G01 X97.30884 Y22.00515
G01 X97.30053 Y22.02196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X99.63294 Y21.36959 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X99.63294 Y21.36959
G01 X99.64975 Y21.37789
G01 X99.83614 Y21.50243
G01 X100.00469 Y21.65023
G01 X100.15247 Y21.81874
G01 X100.27701 Y22.00515
G01 X100.30967 Y22.07137
G01 X100.34897 Y22.13743
G01 X100.39809 Y22.19651
G01 X100.44079 Y22.24035
G01 X100.51955 Y22.30588
G01 X100.61023 Y22.35359
G01 X100.70883 Y22.38140
G01 X100.76913 Y22.39176
G01 X100.87137 Y22.39847
G01 X100.97276 Y22.38376
G01 X101.06890 Y22.34828
G01 X101.12379 Y22.32120
G01 X101.21041 Y22.26654
G01 X101.28376 Y22.19506
G01 X101.33593 Y22.11698
G01 X101.33593 Y23.60103
G01 X101.28214 Y23.52699
G01 X101.20601 Y23.45846
G01 X101.15651 Y23.42249
G01 X101.06781 Y23.37129
G01 X100.97038 Y23.33964
G01 X100.86852 Y23.32892
G01 X100.80733 Y23.32892
G01 X100.70540 Y23.33964
G01 X100.60794 Y23.37131
G01 X100.51922 Y23.42257
G01 X100.46974 Y23.45854
G01 X100.39702 Y23.52336
G01 X100.33858 Y23.60126
G01 X100.32986 Y23.61566
G01 X100.30965 Y23.65259
G01 X100.27698 Y23.71884
G01 X100.15247 Y23.90522
G01 X100.00469 Y24.07372
G01 X99.83614 Y24.22153
G01 X99.64975 Y24.34606
G01 X99.63294 Y24.35437
G01 X99.63294 Y24.32269
G01 X99.69060 Y24.29186
G01 X99.77048 Y24.23849
G01 X99.95232 Y24.08927
G01 X100.02024 Y24.02135
G01 X100.16946 Y23.83951
G01 X100.22285 Y23.75963
G01 X100.33373 Y23.55216
G01 X100.37050 Y23.46341
G01 X100.43878 Y23.23832
G01 X100.45752 Y23.14411
G01 X100.48059 Y22.91000
G01 X100.48059 Y22.81393
G01 X100.45752 Y22.57982
G01 X100.43878 Y22.48561
G01 X100.37050 Y22.26049
G01 X100.33373 Y22.17175
G01 X100.22285 Y21.96430
G01 X100.16946 Y21.88442
G01 X100.02024 Y21.70258
G01 X99.95232 Y21.63466
G01 X99.77048 Y21.48541
G01 X99.69060 Y21.43205
G01 X99.63294 Y21.40124
G01 X99.63294 Y21.36959
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X102.07815 Y24.41947 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X102.07815 Y24.41947
G01 X101.85712 Y24.50918
G01 X101.84810 Y24.50758
G01 X101.77360 Y24.48764
G01 X101.69339 Y24.45843
G01 X101.61945 Y24.41576
G01 X101.55404 Y24.36090
G01 X101.49948 Y24.30636
G01 X101.44452 Y24.24088
G01 X101.42694 Y24.21043
G01 X101.42694 Y24.94169
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X103.01805 Y26.85784 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X103.01805 Y26.85784
G01 X103.26753 Y26.60834
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X103.36537 Y26.85782 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X103.36537 Y26.85782
G01 X103.01805 Y26.85784
G01 X102.89994 Y26.90676
G01 X102.63372 Y27.08162
G01 X102.45887 Y27.34781
G01 X102.40995 Y27.46594
G01 X102.16430 Y27.71154
G01 X102.16430 Y27.71156
G01 X101.94721 Y27.79968
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X102.40995 Y27.81878 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X102.40995 Y27.81878
G01 X102.40995 Y27.46594
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X97.30053 Y23.70197 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X97.30053 Y23.70197
G01 X97.30884 Y23.71881
G01 X97.43338 Y23.90517
G01 X97.58118 Y24.07372
G01 X97.74971 Y24.22153
G01 X97.93609 Y24.34606
G01 X97.95293 Y24.35437
G01 X97.95293 Y24.32269
G01 X97.89527 Y24.29186
G01 X97.81539 Y24.23849
G01 X97.63355 Y24.08927
G01 X97.56563 Y24.02135
G01 X97.41641 Y23.83951
G01 X97.36304 Y23.75963
G01 X97.33221 Y23.70197
G01 X97.30053 Y23.70197
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.91712 Y26.62325 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.91712 Y26.62325
G01 X95.91712 Y26.65640
G01 X95.95367 Y26.68639
G01 X96.02159 Y26.75431
G01 X96.05159 Y26.79086
G01 X96.08281 Y26.79086
G01 X96.04011 Y26.73735
G01 X95.91712 Y26.62325
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.80714 Y27.41532 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.80714 Y27.41532
G01 X93.79066 Y27.33257
G01 X93.74514 Y27.18248
G01 X93.70839 Y27.09373
G01 X93.63445 Y26.95543
G01 X93.60384 Y26.90958
G01 X93.60308 Y26.90913
G01 X93.56663 Y26.88746
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.26687 Y27.50425 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.26687 Y27.50425
G01 X91.25630 Y27.51705
G01 X91.25592 Y27.51756
G01 X91.24949 Y27.58284
G01 X91.24949 Y27.67892
G01 X91.25622 Y27.74834
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.80714 Y27.84633 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.80714 Y27.84633
G01 X93.82360 Y27.92916
G01 X93.86912 Y28.07925
G01 X93.90590 Y28.16800
G01 X93.97981 Y28.30630
G01 X94.03318 Y28.38619
G01 X94.13267 Y28.50740
G01 X94.20059 Y28.57534
G01 X94.23712 Y28.60529
G01 X94.23712 Y28.87305
G01 X94.23732 Y28.87336
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.91712 Y28.60534 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.91712 Y28.60534
G01 X95.95367 Y28.57534
G01 X96.02159 Y28.50740
G01 X96.05159 Y28.47090
G01 X96.08281 Y28.47090
G01 X96.04011 Y28.52439
G01 X95.91712 Y28.63851
G01 X95.91712 Y28.60534
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X95.80793 Y30.96274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X95.80793 Y30.96274
G01 X95.80793 Y30.99146
G01 X95.86442 Y31.03782
G01 X95.92535 Y31.11209
G01 X95.97064 Y31.19680
G01 X95.99853 Y31.28872
G01 X96.00793 Y31.38430
G01 X96.00793 Y31.44432
G01 X96.02792 Y31.44432
G01 X96.02792 Y31.34808
G01 X96.02337 Y31.29690
G01 X95.99398 Y31.19416
G01 X95.94598 Y31.10226
G01 X95.88039 Y31.02184
G01 X95.80793 Y30.96274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X93.92795 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X93.92795 Y31.60432
G01 X93.46485 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X92.72648 Y30.95390 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X92.72648 Y30.95390
G01 X92.70293 Y30.96360
G01 X92.52066 Y31.01557
G01 X92.45947 Y31.02527
G01 X92.34845 Y31.03406
G01 X92.15292 Y31.03406
G01 X92.11853 Y31.03492
G01 X92.11192 Y31.03525
G01 X92.06483 Y31.03965
G01 X92.04451 Y31.04186
G01 X91.99734 Y31.05400
G01 X91.99016 Y31.05611
G01 X91.94563 Y31.06926
G01 X91.92041 Y31.07721
G01 X91.88241 Y31.09583
G01 X91.83473 Y31.12103
G01 X91.80796 Y31.13591
G01 X91.77753 Y31.15946
G01 X91.73580 Y31.19360
G01 X91.70969 Y31.21605
G01 X91.68718 Y31.24224
G01 X91.65305 Y31.28395
G01 X91.62950 Y31.31440
G01 X91.61469 Y31.34099
G01 X91.58950 Y31.38867
G01 X91.57901 Y31.40935
G01 X91.57080 Y31.42682
G01 X91.56280 Y31.45217
G01 X91.54756 Y31.50388
G01 X91.53547 Y31.55090
G01 X91.53326 Y31.57122
G01 X91.52884 Y31.61839
G01 X91.52851 Y31.62492
G01 X91.52767 Y31.65931
G01 X91.52767 Y32.90932
G01 X91.52851 Y32.94373
G01 X91.52884 Y32.95031
G01 X91.53326 Y32.99743
G01 X91.53544 Y33.01770
G01 X91.54756 Y33.06477
G01 X91.56280 Y33.11648
G01 X91.57080 Y33.14185
G01 X91.58950 Y33.17998
G01 X91.61469 Y33.22766
G01 X91.62953 Y33.25427
G01 X91.65300 Y33.28463
G01 X91.68711 Y33.32636
G01 X91.70966 Y33.35260
G01 X91.73590 Y33.37515
G01 X91.77763 Y33.40927
G01 X91.80799 Y33.43273
G01 X91.83473 Y33.44762
G01 X91.88241 Y33.47282
G01 X91.92041 Y33.49143
G01 X91.94563 Y33.49938
G01 X91.99734 Y33.51465
G01 X92.04454 Y33.52682
G01 X92.06483 Y33.52900
G01 X92.06925 Y33.52941
G01 X92.11187 Y33.53340
G01 X92.11853 Y33.53373
G01 X92.15292 Y33.53456
G01 X92.70293 Y33.53456
G01 X92.73732 Y33.53373
G01 X92.74395 Y33.53340
G01 X92.79087 Y33.52903
G01 X92.81131 Y33.52679
G01 X92.85851 Y33.51465
G01 X92.91022 Y33.49938
G01 X92.93547 Y33.49143
G01 X92.97344 Y33.47282
G01 X93.02112 Y33.44762
G01 X93.04786 Y33.43273
G01 X93.07456 Y33.41224
G01 X93.07822 Y33.40927
G01 X93.11995 Y33.37515
G01 X93.15774 Y33.34190
G01 X93.17166 Y33.32877
G01 X93.21276 Y33.29276
G01 X93.22853 Y33.27998
G01 X93.26836 Y33.24533
G01 X93.27049 Y33.24335
G01 X93.31411 Y33.20551
G01 X93.38832 Y33.14538
G01 X93.43905 Y33.10667
G01 X93.44116 Y33.10507
G01 X93.44164 Y33.10474
G01 X93.46028 Y33.01099
G01 X93.46557 Y32.95735
G01 X93.46793 Y32.90932
G01 X93.46793 Y31.65931
G01 X93.46557 Y31.61128
G01 X93.46485 Y31.60432
G01 X93.42294 Y31.56632
G01 X93.41799 Y31.56182
G01 X93.38210 Y31.52893
G01 X93.34161 Y31.49377
G01 X93.33216 Y31.48600
G01 X93.29325 Y31.45209
G01 X93.27126 Y31.43172
G01 X93.23879 Y31.40340
G01 X93.22658 Y31.39337
G01 X93.19498 Y31.36568
G01 X93.17982 Y31.35151
G01 X93.15109 Y31.32636
G01 X93.13791 Y31.31554
G01 X93.10961 Y31.29070
G01 X93.09704 Y31.27889
G01 X93.06973 Y31.25491
G01 X93.05612 Y31.24374
G01 X93.02881 Y31.21976
G01 X93.01624 Y31.20795
G01 X92.98794 Y31.18311
G01 X92.97476 Y31.17229
G01 X92.94603 Y31.14714
G01 X92.93087 Y31.13297
G01 X92.89927 Y31.10528
G01 X92.88705 Y31.09525
G01 X92.85459 Y31.06693
G01 X92.83260 Y31.04656
G01 X92.79368 Y31.01265
G01 X92.78424 Y31.00488
G01 X92.74375 Y30.96972
G01 X92.72648 Y30.95390
G01 X92.73242 Y30.93442
G01 X92.74027 Y30.90726
G01 X92.74802 Y30.87871
G01 X92.75805 Y30.84458
G01 X92.75970 Y30.83932
G01 X92.79305 Y30.67099
G01 X92.79549 Y30.64000
G01 X92.79767 Y30.58481
G01 X92.79767 Y29.58931
G01 X92.79851 Y29.55492
G01 X92.79884 Y29.54841
G01 X92.80044 Y29.53137
G01 X92.80326 Y29.50122
G01 X92.80547 Y29.48093
G01 X92.81756 Y29.43389
G01 X92.83280 Y29.38217
G01 X92.84161 Y29.35438
G01 X92.85467 Y29.31608
G01 X92.87042 Y29.26338
G01 X92.87532 Y29.24443
G01 X92.89198 Y29.18862
G01 X92.89404 Y29.18253
G01 X92.90913 Y29.13297
G01 X92.93521 Y29.03734
G01 X92.94581 Y28.99368
G01 X92.94578 Y28.99365
G01 X92.94133 Y28.98136
G01 X92.88698 Y28.89449
G01 X92.87070 Y28.87369
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X92.93521 Y29.03734 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X92.93521 Y29.03734
G01 X92.94578 Y28.99365
G01 X92.94601 Y28.99279
G01 X92.95929 Y28.98189
G01 X93.03918 Y28.92853
G01 X93.08672 Y28.90313
G01 X93.17547 Y28.86635
G01 X93.22706 Y28.85070
G01 X93.32127 Y28.83196
G01 X93.37491 Y28.82667
G01 X93.42294 Y28.82431
G01 X93.97293 Y28.82431
G01 X94.02096 Y28.82667
G01 X94.07461 Y28.83196
G01 X94.16882 Y28.85070
G01 X94.22040 Y28.86635
G01 X94.23732 Y28.87336
G01 X94.27943 Y28.93536
G01 X94.28604 Y28.94610
G01 X94.31982 Y28.99729
G01 X94.36038 Y29.05466
G01 X94.36787 Y29.06543
G01 X94.39955 Y29.11181
G01 X94.44049 Y29.17087
G01 X94.46754 Y29.20729
G01 X94.47097 Y29.21161
G01 X94.47288 Y29.21400
G01 X94.47745 Y29.21969
G01 X94.49630 Y29.24435
G01 X94.51116 Y29.27100
G01 X94.53635 Y29.31867
G01 X94.55505 Y29.35682
G01 X94.56305 Y29.38217
G01 X94.57829 Y29.43389
G01 X94.59040 Y29.48095
G01 X94.59259 Y29.50122
G01 X94.59701 Y29.54834
G01 X94.59734 Y29.55492
G01 X94.59818 Y29.58931
G01 X94.59818 Y30.83932
G01 X94.59734 Y30.87374
G01 X94.59701 Y30.88031
G01 X94.59259 Y30.92743
G01 X94.59040 Y30.94770
G01 X94.57829 Y30.99477
G01 X94.56693 Y31.03325
G01 X94.55314 Y31.04348
G01 X94.49053 Y31.08547
G01 X94.43661 Y31.11778
G01 X94.41794 Y31.12855
G01 X94.38794 Y31.14508
G01 X94.33983 Y31.17531
G01 X94.30437 Y31.20066
G01 X94.26254 Y31.23470
G01 X94.23056 Y31.26426
G01 X94.19127 Y31.30515
G01 X94.15525 Y31.34719
G01 X94.12574 Y31.38430
G01 X94.11471 Y31.39919
G01 X94.06150 Y31.46378
G01 X94.01263 Y31.51768
G01 X93.97290 Y31.55936
G01 X93.92795 Y31.60432
G01 X93.92795 Y33.18432
G01 X93.93734 Y33.27990
G01 X93.96523 Y33.37183
G01 X94.01052 Y33.45653
G01 X94.07146 Y33.53080
G01 X94.12792 Y33.57713
G01 X94.12792 Y33.60591
G01 X94.05543 Y33.54681
G01 X93.98990 Y33.46644
G01 X93.96534 Y33.41943
G01 X93.92447 Y33.35422
G01 X93.87392 Y33.29624
G01 X93.83021 Y33.25341
G01 X93.74997 Y33.18978
G01 X93.65828 Y33.14424
G01 X93.55909 Y33.11871
G01 X93.49856 Y33.10975
G01 X93.43905 Y33.10667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.41045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.41045 Y35.29628
G01 X91.38020 Y35.39600
G01 X91.36372 Y35.47876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X91.36372 Y35.90977 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X91.36372 Y35.90977
G01 X91.34726 Y35.99262
G01 X91.30174 Y36.14271
G01 X91.26499 Y36.23143
G01 X91.19105 Y36.36976
G01 X91.13768 Y36.44962
G01 X91.03819 Y36.57085
G01 X90.97027 Y36.63877
G01 X90.84904 Y36.73827
G01 X90.76918 Y36.79163
G01 X90.63087 Y36.86557
G01 X90.54213 Y36.90232
G01 X90.39204 Y36.94784
G01 X90.29783 Y36.96659
G01 X90.14177 Y36.98195
G01 X90.04571 Y36.98195
G01 X89.88963 Y36.96659
G01 X89.79542 Y36.94784
G01 X89.64535 Y36.90232
G01 X89.55661 Y36.86557
G01 X89.41830 Y36.79163
G01 X89.33842 Y36.73827
G01 X89.21719 Y36.63877
G01 X89.14927 Y36.57085
G01 X89.04978 Y36.44962
G01 X88.99641 Y36.36976
G01 X88.92250 Y36.23143
G01 X88.88574 Y36.14271
G01 X88.84020 Y35.99262
G01 X88.82374 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.82374 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.82374 Y35.47876
G01 X88.80726 Y35.39600
G01 X88.77700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X88.87045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X88.87045 Y35.29628
G01 X88.84020 Y35.39600
G01 X88.82374 Y35.47876
G01 X88.82374 Y35.90977
G01 X88.80726 Y35.99262
G01 X88.76174 Y36.14271
G01 X88.72499 Y36.23143
G01 X88.65105 Y36.36976
G01 X88.59768 Y36.44962
G01 X88.49819 Y36.57085
G01 X88.43027 Y36.63877
G01 X88.39372 Y36.66877
G01 X88.39372 Y36.83471
G01 X88.39136 Y36.88274
G01 X88.38465 Y36.95104
G01 X88.36591 Y37.04525
G01 X88.34599 Y37.11091
G01 X88.30924 Y37.19966
G01 X88.27688 Y37.26016
G01 X88.22351 Y37.34002
G01 X88.18000 Y37.39305
G01 X88.14769 Y37.42869
G01 X87.67406 Y37.90232
G01 X87.62735 Y37.92168
G01 X87.58290 Y37.94136
G01 X87.51701 Y37.97253
G01 X87.44183 Y38.01263
G01 X87.38117 Y38.04901
G01 X87.31813 Y38.09107
G01 X87.26243 Y38.13237
G01 X87.20784 Y38.17718
G01 X87.15694 Y38.22330
G01 X87.13202 Y38.24703
G01 X87.10662 Y38.27243
G01 X87.08171 Y38.29615
G01 X87.03081 Y38.34228
G01 X86.97622 Y38.38708
G01 X86.92052 Y38.42838
G01 X86.85748 Y38.47044
G01 X86.79682 Y38.50682
G01 X86.72166 Y38.54690
G01 X86.65580 Y38.57806
G01 X86.61135 Y38.59777
G01 X86.56459 Y38.61713
G01 X85.89248 Y38.61710
G01 X81.32993 Y43.17965
G01 X81.32993 Y43.86385
G01 X81.36648 Y43.89385
G01 X81.43440 Y43.96177
G01 X81.51492 Y44.05989
G01 X81.53389 Y44.08301
G01 X81.58726 Y44.16286
G01 X81.66119 Y44.30119
G01 X81.69795 Y44.38991
G01 X81.74347 Y44.54000
G01 X81.75992 Y44.62273
G01 X81.75992 Y45.05374
G01 X81.74347 Y45.13662
G01 X81.71316 Y45.23639
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.80664 Y45.23629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.80664 Y45.23629
G01 X81.77641 Y45.13662
G01 X81.75992 Y45.05374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.75992 Y44.62273 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.75992 Y44.62273
G01 X81.77641 Y44.54000
G01 X81.82193 Y44.38991
G01 X81.85868 Y44.30119
G01 X81.93262 Y44.16286
G01 X81.98598 Y44.08301
G01 X82.08548 Y43.96177
G01 X82.15340 Y43.89385
G01 X82.18995 Y43.86385
G01 X82.18995 Y43.33970
G01 X82.19231 Y43.29169
G01 X82.19901 Y43.22339
G01 X82.21776 Y43.12918
G01 X82.23767 Y43.06353
G01 X82.27443 Y42.97478
G01 X82.30679 Y42.91428
G01 X82.34743 Y42.85347
G01 X82.36015 Y42.83442
G01 X82.40366 Y42.78138
G01 X82.43597 Y42.74575
G01 X86.56459 Y38.61713
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.69700 Y35.29633 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.69700 Y35.29633
G01 X83.72726 Y35.39600
G01 X83.74374 Y35.47876
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.74374 Y35.90977 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.74374 Y35.90977
G01 X83.76020 Y35.99262
G01 X83.80574 Y36.14271
G01 X83.84250 Y36.23143
G01 X83.91641 Y36.36976
G01 X83.96978 Y36.44962
G01 X84.06927 Y36.57085
G01 X84.13719 Y36.63877
G01 X84.25842 Y36.73827
G01 X84.33830 Y36.79163
G01 X84.47661 Y36.86557
G01 X84.56535 Y36.90232
G01 X84.71542 Y36.94784
G01 X84.80963 Y36.96659
G01 X84.96571 Y36.98195
G01 X85.06177 Y36.98195
G01 X85.21783 Y36.96659
G01 X85.31204 Y36.94784
G01 X85.46213 Y36.90232
G01 X85.55087 Y36.86557
G01 X85.68918 Y36.79163
G01 X85.76904 Y36.73827
G01 X85.89027 Y36.63877
G01 X85.95819 Y36.57085
G01 X86.05768 Y36.44962
G01 X86.11105 Y36.36976
G01 X86.18499 Y36.23143
G01 X86.22174 Y36.14271
G01 X86.26726 Y35.99262
G01 X86.28374 Y35.90977
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.28374 Y35.47876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.28374 Y35.47876
G01 X86.26726 Y35.39600
G01 X86.23700 Y35.29633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X86.33045 Y35.29628 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X86.33045 Y35.29628
G01 X86.30020 Y35.39600
G01 X86.28374 Y35.47876
G01 X86.28374 Y35.90977
G01 X86.30020 Y35.99262
G01 X86.34574 Y36.14271
G01 X86.38250 Y36.23143
G01 X86.45641 Y36.36976
G01 X86.50978 Y36.44962
G01 X86.60927 Y36.57085
G01 X86.61948 Y36.58104
G01 X86.26340 Y36.93712
G01 X85.54455 Y36.93712
G01 X85.49652 Y36.93948
G01 X85.42822 Y36.94619
G01 X85.33401 Y36.96494
G01 X85.26835 Y36.98485
G01 X85.17960 Y37.02160
G01 X85.11910 Y37.05396
G01 X85.03924 Y37.10733
G01 X84.98621 Y37.15084
G01 X84.95057 Y37.18315
G01 X79.89597 Y42.23775
G01 X79.86366 Y42.27338
G01 X79.82015 Y42.32642
G01 X79.76679 Y42.40628
G01 X79.73443 Y42.46678
G01 X79.69767 Y42.55553
G01 X79.67776 Y42.62118
G01 X79.65901 Y42.71539
G01 X79.65231 Y42.78369
G01 X79.64995 Y42.83170
G01 X79.64995 Y43.86385
G01 X79.61340 Y43.89385
G01 X79.54548 Y43.96177
G01 X79.44598 Y44.08301
G01 X79.39262 Y44.16286
G01 X79.31868 Y44.30119
G01 X79.28193 Y44.38991
G01 X79.23641 Y44.54000
G01 X79.21992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.21992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.21992 Y45.05374
G01 X79.23641 Y45.13662
G01 X79.26664 Y45.23629
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.17316 Y45.23639 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.17316 Y45.23639
G01 X79.20347 Y45.13662
G01 X79.21992 Y45.05374
G01 X79.21992 Y44.62273
G01 X79.20347 Y44.54000
G01 X79.15795 Y44.38991
G01 X79.12119 Y44.30119
G01 X79.04726 Y44.16286
G01 X78.99389 Y44.08301
G01 X78.97492 Y44.05989
G01 X78.89440 Y43.96177
G01 X78.82648 Y43.89385
G01 X78.78993 Y43.86385
G01 X78.78993 Y43.07805
G01 X83.06769 Y38.80029
G01 X83.10000 Y38.76465
G01 X83.14351 Y38.71162
G01 X83.19688 Y38.63176
G01 X83.22924 Y38.57126
G01 X83.26599 Y38.48251
G01 X83.28591 Y38.41685
G01 X83.30465 Y38.32264
G01 X83.31136 Y38.25434
G01 X83.31372 Y38.20631
G01 X83.31372 Y36.66877
G01 X83.35027 Y36.63877
G01 X83.41819 Y36.57085
G01 X83.51768 Y36.44962
G01 X83.57105 Y36.36976
G01 X83.64499 Y36.23143
G01 X83.68174 Y36.14271
G01 X83.72726 Y35.99262
G01 X83.74374 Y35.90977
G01 X83.74374 Y35.47876
G01 X83.76020 Y35.39600
G01 X83.79045 Y35.29628
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X84.37793 Y33.57716 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X84.37793 Y33.57716
G01 X84.37793 Y33.60591
G01 X84.45039 Y33.54681
G01 X84.51598 Y33.46639
G01 X84.56398 Y33.37449
G01 X84.59337 Y33.27175
G01 X84.59792 Y33.22057
G01 X84.59792 Y33.12433
G01 X84.57793 Y33.12433
G01 X84.57793 Y33.18432
G01 X84.56853 Y33.27990
G01 X84.54064 Y33.37183
G01 X84.49535 Y33.45653
G01 X84.43442 Y33.53080
G01 X84.37793 Y33.57716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.73114 Y34.48496 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.73114 Y34.48496
G01 X82.74600 Y34.40921
G01 X82.76129 Y34.34470
G01 X82.76990 Y34.31391
G01 X82.78426 Y34.25272
G01 X82.80831 Y34.12544
G01 X82.82266 Y34.06423
G01 X82.82378 Y34.06032
G01 X82.78888 Y33.83880
G01 X82.77158 Y33.78287
G01 X82.72228 Y33.65719
G01 X82.69792 Y33.60591
G01 X82.62543 Y33.54681
G01 X82.55990 Y33.46644
G01 X82.53534 Y33.41943
G01 X82.49447 Y33.35422
G01 X82.44392 Y33.29624
G01 X82.40021 Y33.25341
G01 X82.31997 Y33.18978
G01 X82.22828 Y33.14424
G01 X82.12909 Y33.11871
G01 X82.06856 Y33.10975
G01 X82.00905 Y33.10667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.69792 Y33.60591 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.69792 Y33.60591
G01 X82.69792 Y33.57713
G01 X82.64146 Y33.53080
G01 X82.58052 Y33.45653
G01 X82.53523 Y33.37183
G01 X82.50734 Y33.27990
G01 X82.49795 Y33.18432
G01 X82.49795 Y31.60432
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.03485 Y31.60432 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.03485 Y31.60432
G01 X82.49795 Y31.60432
G01 X82.54291 Y31.55936
G01 X82.58263 Y31.51768
G01 X82.63150 Y31.46378
G01 X82.68471 Y31.39919
G01 X82.69574 Y31.38430
G01 X82.72525 Y31.34719
G01 X82.76127 Y31.30515
G01 X82.80056 Y31.26426
G01 X82.83254 Y31.23470
G01 X82.87438 Y31.20066
G01 X82.90983 Y31.17531
G01 X82.95794 Y31.14508
G01 X82.98794 Y31.12855
G01 X83.00661 Y31.11778
G01 X83.06053 Y31.08547
G01 X83.12314 Y31.04348
G01 X83.13693 Y31.03325
G01 X83.14829 Y30.99477
G01 X83.16040 Y30.94773
G01 X83.16259 Y30.92743
G01 X83.16701 Y30.88029
G01 X83.16734 Y30.87374
G01 X83.16818 Y30.83932
G01 X83.16818 Y29.58931
G01 X83.16734 Y29.55492
G01 X83.16655 Y29.53899
G01 X83.16526 Y29.50094
G01 X83.16503 Y29.46899
G01 X83.16434 Y29.45449
G01 X83.16289 Y29.42944
G01 X83.16173 Y29.37346
G01 X83.16300 Y29.28839
G01 X83.16523 Y29.23498
G01 X83.16589 Y29.22568
G01 X83.16841 Y29.16162
G01 X83.16851 Y29.15281
G01 X83.15037 Y29.12571
G01 X83.11616 Y29.08400
G01 X83.04824 Y29.01611
G01 X83.00658 Y28.98189
G01 X82.92670 Y28.92853
G01 X82.87915 Y28.90313
G01 X82.79040 Y28.86635
G01 X82.73882 Y28.85070
G01 X82.64461 Y28.83196
G01 X82.59096 Y28.82667
G01 X82.54293 Y28.82431
G01 X81.99294 Y28.82431
G01 X81.94491 Y28.82667
G01 X81.89127 Y28.83196
G01 X81.79706 Y28.85070
G01 X81.74547 Y28.86635
G01 X81.65672 Y28.90313
G01 X81.60918 Y28.92853
G01 X81.52929 Y28.98189
G01 X81.51842 Y28.99081
G01 X81.51807 Y28.99213
G01 X81.50648 Y29.03886
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X81.41634 Y28.83815 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X81.41634 Y28.83815
G01 X81.41702 Y28.83833
G01 X81.42053 Y28.84196
G01 X81.45822 Y28.89015
G01 X81.51258 Y28.97704
G01 X81.51807 Y28.99213
G01 X81.51809 Y28.99215
G01 X81.50648 Y29.03886
G01 X81.48002 Y29.13366
G01 X81.46630 Y29.17816
G01 X81.46259 Y29.18911
G01 X81.44723 Y29.24006
G01 X81.44095 Y29.26368
G01 X81.42487 Y29.31621
G01 X81.41309 Y29.35009
G01 X81.40280 Y29.38217
G01 X81.38756 Y29.43389
G01 X81.37547 Y29.48093
G01 X81.37326 Y29.50122
G01 X81.37044 Y29.53137
G01 X81.36884 Y29.54841
G01 X81.36851 Y29.55492
G01 X81.36767 Y29.58931
G01 X81.36767 Y30.58481
G01 X81.36549 Y30.64000
G01 X81.36305 Y30.67099
G01 X81.32970 Y30.83932
G01 X81.32805 Y30.84458
G01 X81.31802 Y30.87871
G01 X81.31027 Y30.90726
G01 X81.30242 Y30.93442
G01 X81.29648 Y30.95390
G01 X81.31375 Y30.96972
G01 X81.35424 Y31.00488
G01 X81.36368 Y31.01265
G01 X81.40260 Y31.04656
G01 X81.42459 Y31.06693
G01 X81.45705 Y31.09525
G01 X81.46927 Y31.10528
G01 X81.50087 Y31.13297
G01 X81.51603 Y31.14714
G01 X81.54476 Y31.17229
G01 X81.55794 Y31.18311
G01 X81.58624 Y31.20795
G01 X81.59881 Y31.21976
G01 X81.62612 Y31.24374
G01 X81.63973 Y31.25491
G01 X81.66704 Y31.27889
G01 X81.67961 Y31.29070
G01 X81.70791 Y31.31554
G01 X81.72109 Y31.32636
G01 X81.74982 Y31.35151
G01 X81.76498 Y31.36568
G01 X81.79658 Y31.39337
G01 X81.80879 Y31.40340
G01 X81.84126 Y31.43172
G01 X81.86325 Y31.45209
G01 X81.90216 Y31.48600
G01 X81.91161 Y31.49377
G01 X81.95210 Y31.52893
G01 X81.98799 Y31.56182
G01 X81.99294 Y31.56632
G01 X82.03485 Y31.60432
G01 X82.03557 Y31.61128
G01 X82.03793 Y31.65931
G01 X82.03793 Y32.90932
G01 X82.03557 Y32.95735
G01 X82.03028 Y33.01099
G01 X82.01164 Y33.10474
G01 X82.01116 Y33.10507
G01 X82.00905 Y33.10667
G01 X81.95832 Y33.14538
G01 X81.88411 Y33.20551
G01 X81.84049 Y33.24335
G01 X81.83836 Y33.24533
G01 X81.79853 Y33.27998
G01 X81.78276 Y33.29276
G01 X81.74166 Y33.32877
G01 X81.72774 Y33.34190
G01 X81.68995 Y33.37515
G01 X81.64822 Y33.40927
G01 X81.64456 Y33.41224
G01 X81.61786 Y33.43273
G01 X81.59112 Y33.44762
G01 X81.54344 Y33.47282
G01 X81.50547 Y33.49143
G01 X81.48022 Y33.49938
G01 X81.42851 Y33.51465
G01 X81.38131 Y33.52679
G01 X81.36087 Y33.52903
G01 X81.31395 Y33.53340
G01 X81.30732 Y33.53373
G01 X81.27293 Y33.53456
G01 X80.72294 Y33.53456
G01 X80.68853 Y33.53373
G01 X80.68187 Y33.53340
G01 X80.63925 Y33.52941
G01 X80.63483 Y33.52900
G01 X80.61454 Y33.52682
G01 X80.56734 Y33.51465
G01 X80.51563 Y33.49938
G01 X80.49041 Y33.49143
G01 X80.45241 Y33.47282
G01 X80.40473 Y33.44762
G01 X80.37799 Y33.43273
G01 X80.34763 Y33.40927
G01 X80.30590 Y33.37515
G01 X80.27966 Y33.35260
G01 X80.25711 Y33.32636
G01 X80.22300 Y33.28463
G01 X80.19953 Y33.25427
G01 X80.18469 Y33.22766
G01 X80.15950 Y33.17998
G01 X80.14080 Y33.14185
G01 X80.13280 Y33.11648
G01 X80.11756 Y33.06477
G01 X80.10544 Y33.01770
G01 X80.10326 Y32.99743
G01 X80.09884 Y32.95031
G01 X80.09851 Y32.94373
G01 X80.09767 Y32.90932
G01 X80.09767 Y31.65931
G01 X80.09851 Y31.62492
G01 X80.09884 Y31.61839
G01 X80.10326 Y31.57122
G01 X80.10547 Y31.55090
G01 X80.11756 Y31.50388
G01 X80.13280 Y31.45217
G01 X80.14080 Y31.42682
G01 X80.14901 Y31.40935
G01 X80.15950 Y31.38867
G01 X80.18469 Y31.34099
G01 X80.19950 Y31.31440
G01 X80.22305 Y31.28395
G01 X80.25718 Y31.24224
G01 X80.27969 Y31.21605
G01 X80.30580 Y31.19360
G01 X80.34753 Y31.15946
G01 X80.37796 Y31.13591
G01 X80.40473 Y31.12103
G01 X80.45241 Y31.09583
G01 X80.49041 Y31.07721
G01 X80.51563 Y31.06926
G01 X80.56016 Y31.05611
G01 X80.56734 Y31.05400
G01 X80.61451 Y31.04186
G01 X80.63483 Y31.03965
G01 X80.68192 Y31.03525
G01 X80.68853 Y31.03492
G01 X80.72294 Y31.03406
G01 X80.91842 Y31.03406
G01 X81.02947 Y31.02527
G01 X81.09066 Y31.01557
G01 X81.27293 Y30.96360
G01 X81.29648 Y30.95390
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X83.16851 Y29.15281 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X83.16851 Y29.15281
G01 X83.16853 Y29.15073
G01 X83.23112 Y29.08123
G01 X83.31400 Y29.02101
G01 X83.40762 Y28.97933
G01 X83.46581 Y28.96043
G01 X83.54054 Y28.94252
G01 X83.61717 Y28.93648
G01 X83.61832 Y28.93648
G01 X83.81245 Y28.90722
G01 X84.00008 Y28.84933
G01 X84.17694 Y28.76416
G01 X84.33919 Y28.65355
G01 X84.48311 Y28.51999
G01 X84.60554 Y28.36650
G01 X84.70371 Y28.19647
G01 X84.75718 Y28.06018
G01 X84.81128 Y27.95911
G01 X84.83759 Y27.92134
G01 X84.89530 Y27.85281
G01 X84.96452 Y27.79594
G01 X85.04293 Y27.75263
G01 X85.09896 Y27.72807
G01 X85.19644 Y27.69701
G01 X85.29830 Y27.68685
G01 X85.40000 Y27.69813
G01 X85.45979 Y27.71113
G01 X85.48562 Y27.71967
G01 X85.48750 Y27.72215
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X85.48834 Y27.54341 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X85.48834 Y27.54341
G01 X85.39535 Y27.56909
G01 X85.29309 Y27.57522
G01 X85.19182 Y27.56000
G01 X85.13259 Y27.54458
G01 X85.03665 Y27.50859
G01 X84.95029 Y27.45345
G01 X84.87732 Y27.38151
G01 X84.83846 Y27.33425
G01 X84.79441 Y27.27118
G01 X84.76081 Y27.20201
G01 X84.70368 Y27.05647
G01 X84.60554 Y26.88647
G01 X84.48311 Y26.73298
G01 X84.36012 Y26.61883
G01 X84.36012 Y26.65200
G01 X84.39667 Y26.68200
G01 X84.46459 Y26.74994
G01 X84.56408 Y26.87115
G01 X84.61745 Y26.95104
G01 X84.69139 Y27.08936
G01 X84.72814 Y27.17811
G01 X84.77366 Y27.32815
G01 X84.79241 Y27.42236
G01 X84.79502 Y27.44898
G01 X84.80777 Y27.57844
G01 X84.80777 Y27.67448
G01 X84.79241 Y27.83056
G01 X84.77366 Y27.92477
G01 X84.72814 Y28.07486
G01 X84.69139 Y28.16361
G01 X84.61745 Y28.30193
G01 X84.56408 Y28.38177
G01 X84.46459 Y28.50303
G01 X84.39667 Y28.57092
G01 X84.27544 Y28.67041
G01 X84.19558 Y28.72380
G01 X84.05728 Y28.79774
G01 X83.96853 Y28.83447
G01 X83.81844 Y28.87999
G01 X83.72423 Y28.89876
G01 X83.56818 Y28.91410
G01 X83.47211 Y28.91410
G01 X83.31603 Y28.89876
G01 X83.22182 Y28.87999
G01 X83.07176 Y28.83447
G01 X82.98301 Y28.79774
G01 X82.84471 Y28.72380
G01 X82.76482 Y28.67041
G01 X82.64359 Y28.57092
G01 X82.57567 Y28.50303
G01 X82.47618 Y28.38177
G01 X82.42281 Y28.30193
G01 X82.34890 Y28.16361
G01 X82.31212 Y28.07486
G01 X82.26660 Y27.92477
G01 X82.25012 Y27.84194
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X82.25012 Y27.41093 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X82.25012 Y27.41093
G01 X82.26660 Y27.32815
G01 X82.31212 Y27.17811
G01 X82.34890 Y27.08936
G01 X82.42281 Y26.95104
G01 X82.47618 Y26.87115
G01 X82.57567 Y26.74994
G01 X82.64359 Y26.68200
G01 X82.68012 Y26.65203
G01 X82.68012 Y26.61883
G01 X82.53026 Y26.75789
G01 X82.44517 Y26.82119
G01 X82.41324 Y26.83999
G01 X82.40841 Y26.84278
G01 X82.33010 Y26.87989
G01 X82.24651 Y26.90262
G01 X82.16023 Y26.91029
G01 X82.09904 Y26.91029
G01 X82.04606 Y26.90473
G01 X82.00958 Y26.88301
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X79.70593 Y27.57979 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X79.70593 Y27.57979
G01 X79.69249 Y27.59843
G01 X79.69249 Y27.67448
G01 X79.69597 Y27.71009
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.21305 Y27.03940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.21305 Y27.03940
G01 X76.28399 Y27.07537
G01 X76.28833 Y27.07758
G01 X76.35445 Y27.06579
G01 X76.41322 Y27.04883
G01 X76.51808 Y27.00481
G01 X76.58348 Y26.95716
G01 X76.60997 Y26.93780
G01 X76.63187 Y26.91756
G01 X76.68236 Y26.86323
G01 X76.73296 Y26.79980
G01 X76.85592 Y26.68571
G01 X76.85592 Y26.71888
G01 X76.81940 Y26.74885
G01 X76.75148 Y26.81677
G01 X76.65198 Y26.93801
G01 X76.59862 Y27.01786
G01 X76.52468 Y27.15619
G01 X76.48793 Y27.24494
G01 X76.44241 Y27.39503
G01 X76.42592 Y27.47773
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X76.42592 Y27.90877 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X76.42592 Y27.90877
G01 X76.44241 Y27.99162
G01 X76.48793 Y28.14171
G01 X76.52468 Y28.23043
G01 X76.59862 Y28.36876
G01 X76.65198 Y28.44865
G01 X76.75148 Y28.56985
G01 X76.81940 Y28.63780
G01 X76.94063 Y28.73727
G01 X77.02049 Y28.79063
G01 X77.15882 Y28.86457
G01 X77.24754 Y28.90135
G01 X77.39763 Y28.94687
G01 X77.49184 Y28.96559
G01 X77.64792 Y28.98095
G01 X77.74396 Y28.98095
G01 X77.90004 Y28.96559
G01 X77.99425 Y28.94687
G01 X78.14434 Y28.90135
G01 X78.23306 Y28.86457
G01 X78.37139 Y28.79063
G01 X78.45124 Y28.73727
G01 X78.57248 Y28.63780
G01 X78.64040 Y28.56985
G01 X78.73989 Y28.44865
G01 X78.79326 Y28.36876
G01 X78.86719 Y28.23043
G01 X78.90395 Y28.14171
G01 X78.94947 Y27.99162
G01 X78.96821 Y27.89741
G01 X78.98358 Y27.74133
G01 X78.98358 Y27.64529
G01 X78.96821 Y27.48921
G01 X78.96498 Y27.47308
G01 X78.94947 Y27.39503
G01 X78.90395 Y27.24494
G01 X78.86719 Y27.15619
G01 X78.79326 Y27.01786
G01 X78.73989 Y26.93801
G01 X78.64040 Y26.81677
G01 X78.57248 Y26.74885
G01 X78.53593 Y26.71885
G01 X78.53593 Y26.68571
G01 X78.65891 Y26.79980
G01 X78.78132 Y26.95330
G01 X78.87949 Y27.12332
G01 X78.93656 Y27.26874
G01 X78.97017 Y27.33785
G01 X79.01418 Y27.40087
G01 X79.05305 Y27.44814
G01 X79.12602 Y27.52002
G01 X79.21236 Y27.57519
G01 X79.30827 Y27.61118
G01 X79.36747 Y27.62657
G01 X79.46874 Y27.64184
G01 X79.57098 Y27.63574
G01 X79.66971 Y27.60849
G01 X79.69135 Y27.60001
G01 X79.70593 Y27.57979
G01 X79.71782 Y27.56406
G01 X79.80252 Y27.43171
G01 X79.83900 Y27.36229
G01 X79.84349 Y27.35357
G01 X79.86470 Y27.31192
G01 X79.89841 Y27.23498
G01 X79.90458 Y27.21832
G01 X79.93158 Y27.15495
G01 X79.96846 Y27.07903
G01 X80.00545 Y27.01657
G01 X80.04233 Y26.96061
G01 X80.04342 Y26.95911
G01 X80.07220 Y26.91990
G01 X80.14324 Y26.83821
G01 X80.15680 Y26.82305
G01 X80.16160 Y26.81789
G01 X80.19013 Y26.78754
G01 X80.23633 Y26.73323
G01 X80.25647 Y26.70707
G01 X80.26282 Y26.67811
G01 X80.27926 Y26.54517
G01 X80.27959 Y26.53369
G01 X80.27987 Y26.51352
G01 X80.27987 Y26.22124
G01 X80.27108 Y26.11032
G01 X80.26140 Y26.04916
G01 X80.26044 Y26.04324
G01 X80.17822 Y25.93521
G01 X80.16767 Y25.92376
G01 X80.14829 Y25.90359
G01 X78.89201 Y24.64733
G01 X78.80745 Y24.57517
G01 X78.75731 Y24.53875
G01 X78.75236 Y24.53517
G01 X78.61685 Y24.51685
G01 X78.60133 Y24.51624
G01 X78.57436 Y24.51573
G01 X71.11819 Y24.51573
G01 X71.00729 Y24.52452
G01 X70.94608 Y24.53420
G01 X70.92147 Y24.53852
G01 X70.84179 Y24.60588
G01 X70.82581 Y24.62150
G01 X70.81158 Y24.63501
G01 X70.79152 Y24.65355
G01 X70.78547 Y24.65919
G01 X70.78192 Y24.66257
G01 X70.69795 Y24.72963
G01 X70.67023 Y24.75297
G01 X70.61740 Y24.79981
G01 X70.61288 Y24.80387
G01 X70.56607 Y24.84611
G01 X70.50008 Y24.91297
G01 X70.43838 Y24.98297
G01 X70.39215 Y25.04124
G01 X70.38994 Y25.07408
G01 X70.39172 Y25.12955
G01 X70.39584 Y25.13494
G01 X70.43864 Y25.18746
G01 X70.49993 Y25.25815
G01 X70.57996 Y25.33857
G01 X70.61735 Y25.37113
G01 X70.62243 Y25.37555
G01 X70.67023 Y25.41799
G01 X70.69795 Y25.44134
G01 X70.77597 Y25.50367
G01 X70.79238 Y25.51639
G01 X70.84915 Y25.55907
G01 X70.86706 Y25.57212
G01 X70.87183 Y25.57552
G01 X70.92733 Y25.58528
G01 X71.04491 Y25.59602
G01 X71.04821 Y25.59605
G01 X71.05362 Y25.59610
G01 X73.75895 Y25.59610
G01 X73.79339 Y25.59691
G01 X73.82761 Y25.59861
G01 X73.86167 Y25.60369
G01 X73.92910 Y25.61710
G01 X73.96243 Y25.62546
G01 X73.99476 Y25.63699
G01 X74.05837 Y25.66333
G01 X74.08943 Y25.67801
G01 X74.11887 Y25.69569
G01 X74.13495 Y25.70560
G01 X74.17614 Y25.73394
G01 X74.20370 Y25.75437
G01 X74.22918 Y25.77745
G01 X74.25407 Y25.80118
G01 X74.86441 Y26.41149
G01 X74.94902 Y26.48370
G01 X74.99913 Y26.52010
G01 X75.01706 Y26.53275
G01 X75.12128 Y26.54189
G01 X75.13901 Y26.54212
G01 X75.15455 Y26.54255
G01 X75.18206 Y26.54357
G01 X75.19039 Y26.54392
G01 X75.25092 Y26.54690
G01 X75.34642 Y26.55957
G01 X75.41412 Y26.57194
G01 X75.43845 Y26.57766
G01 X75.56398 Y26.61822
G01 X75.61866 Y26.63841
G01 X75.62819 Y26.64344
G01 X75.76629 Y26.71771
G01 X75.78610 Y26.72879
G01 X75.82328 Y26.75655
G01 X75.94398 Y26.85307
G01 X75.94579 Y26.85447
G01 X76.00103 Y26.89833
G01 X76.03456 Y26.92345
G01 X76.08638 Y26.96008
G01 X76.13454 Y26.99165
G01 X76.21305 Y27.03940
G01 X76.28396 Y27.07532
G01 X76.32719 Y27.15619
G01 X76.36395 Y27.24494
G01 X76.40947 Y27.39503
G01 X76.42592 Y27.47773
G01 X76.42592 Y27.90877
G01 X76.40947 Y27.99162
G01 X76.36395 Y28.14171
G01 X76.32719 Y28.23043
G01 X76.25326 Y28.36876
G01 X76.19989 Y28.44865
G01 X76.10040 Y28.56985
G01 X76.03248 Y28.63780
G01 X75.91124 Y28.73727
G01 X75.83139 Y28.79063
G01 X75.69306 Y28.86457
G01 X75.60434 Y28.90135
G01 X75.45425 Y28.94687
G01 X75.36004 Y28.96559
G01 X75.20396 Y28.98095
G01 X75.10792 Y28.98095
G01 X74.95184 Y28.96559
G01 X74.85763 Y28.94687
G01 X74.70754 Y28.90135
G01 X74.61882 Y28.86457
G01 X74.48049 Y28.79063
G01 X74.40063 Y28.73727
G01 X74.27940 Y28.63780
G01 X74.21148 Y28.56985
G01 X74.11198 Y28.44865
G01 X74.05862 Y28.36876
G01 X73.98468 Y28.23043
G01 X73.94793 Y28.14171
G01 X73.90241 Y27.99162
G01 X73.88366 Y27.89741
G01 X73.86830 Y27.74133
G01 X73.86830 Y27.64529
G01 X73.87292 Y27.59825
G01 X73.41100 Y27.13633
G01 X71.02530 Y27.13633
G01 X70.94679 Y27.23204
G01 X70.87887 Y27.29996
G01 X70.78072 Y27.38050
G01 X70.75764 Y27.39942
G01 X70.67778 Y27.45281
G01 X70.53947 Y27.52673
G01 X70.45073 Y27.56346
G01 X70.30064 Y27.60900
G01 X70.21781 Y27.62546
G01 X69.78677 Y27.62551
G01 X69.70402 Y27.60900
G01 X69.55395 Y27.56346
G01 X69.46521 Y27.52673
G01 X69.32690 Y27.45281
G01 X69.24702 Y27.39942
G01 X69.12579 Y27.29996
G01 X69.11245 Y27.28662
G01 X69.08169 Y27.21250
G01 X69.02558 Y27.05568
G01 X69.00222 Y26.97895
G01 X68.96295 Y26.82211
G01 X68.94989 Y26.75665
G01 X68.92665 Y26.59983
G01 X68.92081 Y26.54077
G01 X68.91311 Y26.38396
G01 X68.91311 Y26.32698
G01 X68.92081 Y26.17019
G01 X68.92665 Y26.11113
G01 X68.94989 Y25.95431
G01 X68.96297 Y25.88881
G01 X68.97542 Y25.83910
G01 X68.98339 Y25.80354
G01 X68.99736 Y25.73321
G01 X68.99808 Y25.72975
G01 X69.01349 Y25.65020
G01 X69.01431 Y25.64609
G01 X69.02866 Y25.57390
G01 X69.03938 Y25.50169
G01 X69.02802 Y25.47420
G01 X68.99566 Y25.41368
G01 X68.94230 Y25.33384
G01 X68.89876 Y25.28078
G01 X68.86645 Y25.24515
G01 X68.68431 Y25.06295
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.08151 Y24.67266 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.08151 Y24.67266
G01 X69.09221 Y24.72635
G01 X69.12579 Y24.75993
G01 X69.24702 Y24.85942
G01 X69.32690 Y24.91279
G01 X69.46521 Y24.98670
G01 X69.55395 Y25.02348
G01 X69.70402 Y25.06900
G01 X69.78677 Y25.08548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.21781 Y25.08548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.21781 Y25.08548
G01 X70.30064 Y25.06900
G01 X70.39215 Y25.04124
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.39172 Y25.12955 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.39172 Y25.12955
G01 X70.30064 Y25.10194
G01 X70.21781 Y25.08548
G01 X69.78677 Y25.08548
G01 X69.70402 Y25.10194
G01 X69.55395 Y25.14746
G01 X69.46521 Y25.18424
G01 X69.32690 Y25.25815
G01 X69.24702 Y25.31152
G01 X69.12579 Y25.41101
G01 X69.05787 Y25.47893
G01 X69.03943 Y25.50141
G01 X69.03938 Y25.50169
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.11245 Y27.28662 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.11245 Y27.28662
G01 X69.11250 Y27.57397
G01 X69.33328 Y27.79475
G01 X69.46521 Y27.72421
G01 X69.55395 Y27.68748
G01 X69.70402 Y27.64197
G01 X69.78677 Y27.62551
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.21781 Y27.62546 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.21781 Y27.62546
G01 X70.30064 Y27.64197
G01 X70.45073 Y27.68748
G01 X70.53947 Y27.72421
G01 X70.67778 Y27.79815
G01 X70.75764 Y27.85152
G01 X70.87887 Y27.95103
G01 X70.94679 Y28.01893
G01 X71.04628 Y28.14019
G01 X71.09965 Y28.22002
G01 X71.17359 Y28.35832
G01 X71.21034 Y28.44707
G01 X71.25586 Y28.59716
G01 X71.27460 Y28.69139
G01 X71.28997 Y28.84745
G01 X71.28997 Y28.94349
G01 X71.27460 Y29.09957
G01 X71.25586 Y29.19380
G01 X71.21034 Y29.34384
G01 X71.17359 Y29.43259
G01 X71.09965 Y29.57089
G01 X71.04628 Y29.65078
G01 X70.94679 Y29.77201
G01 X70.87887 Y29.83993
G01 X70.75764 Y29.93942
G01 X70.67778 Y29.99279
G01 X70.53947 Y30.06670
G01 X70.45073 Y30.10346
G01 X70.30064 Y30.14900
G01 X70.21781 Y30.16548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.78677 Y30.16548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.78677 Y30.16548
G01 X69.70402 Y30.14900
G01 X69.55395 Y30.10346
G01 X69.46521 Y30.06670
G01 X69.32690 Y29.99279
G01 X69.24702 Y29.93942
G01 X69.12579 Y29.83993
G01 X69.05787 Y29.77201
G01 X68.99493 Y29.69533
G01 X68.96988 Y29.68773
G01 X68.88113 Y29.65098
G01 X68.82063 Y29.61862
G01 X68.74075 Y29.56525
G01 X68.68774 Y29.52174
G01 X68.65210 Y29.48944
G01 X68.60001 Y29.43734
G01 X68.14728 Y28.98466
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X67.18210 Y31.27064 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X67.18210 Y31.27064
G01 X67.94088 Y32.02944
G01 X67.97651 Y32.06172
G01 X68.02955 Y32.10525
G01 X68.10943 Y32.15862
G01 X68.16993 Y32.19095
G01 X68.25866 Y32.22773
G01 X68.32434 Y32.24765
G01 X68.41855 Y32.26639
G01 X68.48685 Y32.27310
G01 X68.53488 Y32.27546
G01 X69.02787 Y32.27546
G01 X69.05787 Y32.31201
G01 X69.12579 Y32.37993
G01 X69.24702 Y32.47942
G01 X69.32690 Y32.53279
G01 X69.46521 Y32.60670
G01 X69.55395 Y32.64346
G01 X69.70402 Y32.68900
G01 X69.78677 Y32.70548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.21781 Y32.70548 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.21781 Y32.70548
G01 X70.30064 Y32.72194
G01 X70.45073 Y32.76746
G01 X70.53947 Y32.80421
G01 X70.67778 Y32.87815
G01 X70.75764 Y32.93152
G01 X70.87887 Y33.03101
G01 X70.94679 Y33.09893
G01 X71.04628 Y33.22016
G01 X71.09965 Y33.30002
G01 X71.17359 Y33.43832
G01 X71.21034 Y33.52707
G01 X71.25586 Y33.67716
G01 X71.27460 Y33.77137
G01 X71.28997 Y33.92743
G01 X71.28997 Y34.02349
G01 X71.27460 Y34.17957
G01 X71.25586 Y34.27378
G01 X71.21034 Y34.42384
G01 X71.17359 Y34.51259
G01 X71.09965 Y34.65089
G01 X71.04628 Y34.73078
G01 X70.94679 Y34.85201
G01 X70.87887 Y34.91993
G01 X70.75764 Y35.01942
G01 X70.67778 Y35.07279
G01 X70.53947 Y35.14670
G01 X70.45073 Y35.18346
G01 X70.30064 Y35.22900
G01 X70.21781 Y35.24546
G01 X69.78677 Y35.24548
G01 X69.70402 Y35.26194
G01 X69.61230 Y35.28988
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.61283 Y35.20134 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.61283 Y35.20134
G01 X69.70402 Y35.22900
G01 X69.78677 Y35.24548
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X70.21781 Y35.24546 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X70.21781 Y35.24546
G01 X70.30064 Y35.26194
G01 X70.45073 Y35.30746
G01 X70.53947 Y35.34421
G01 X70.67778 Y35.41815
G01 X70.75764 Y35.47152
G01 X70.87887 Y35.57101
G01 X70.94679 Y35.63893
G01 X71.04628 Y35.76016
G01 X71.09965 Y35.84002
G01 X71.17359 Y35.97832
G01 X71.21034 Y36.06707
G01 X71.25586 Y36.21716
G01 X71.27460 Y36.31137
G01 X71.28997 Y36.46743
G01 X71.28997 Y36.56349
G01 X71.27460 Y36.71957
G01 X71.25586 Y36.81378
G01 X71.21034 Y36.96384
G01 X71.17359 Y37.05259
G01 X71.09965 Y37.19089
G01 X71.04628 Y37.27078
G01 X70.97204 Y37.36125
G01 X70.94679 Y37.39201
G01 X70.87887 Y37.45993
G01 X70.75764 Y37.55942
G01 X70.67778 Y37.61279
G01 X70.53947 Y37.68670
G01 X70.45073 Y37.72346
G01 X70.31225 Y37.76547
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.69231 Y37.76547 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.69231 Y37.76547
G01 X69.20234 Y37.76547
G01 X69.10674 Y37.77489
G01 X69.01479 Y37.80275
G01 X68.93003 Y37.84812
G01 X68.85584 Y37.90898
G01 X68.79493 Y37.98322
G01 X68.74961 Y38.06796
G01 X68.72175 Y38.15988
G01 X68.71629 Y38.21548
G01 X67.68924 Y38.21548
G01 X67.65922 Y38.17893
G01 X67.59132 Y38.11101
G01 X67.47006 Y38.01152
G01 X67.39023 Y37.95815
G01 X67.25193 Y37.88421
G01 X67.16318 Y37.84746
G01 X67.01309 Y37.80194
G01 X66.91888 Y37.78320
G01 X66.76282 Y37.76783
G01 X66.66676 Y37.76783
G01 X66.51068 Y37.78320
G01 X66.41647 Y37.80194
G01 X66.26638 Y37.84746
G01 X66.17766 Y37.88421
G01 X66.03936 Y37.95815
G01 X65.95947 Y38.01152
G01 X65.83824 Y38.11101
G01 X65.77032 Y38.17893
G01 X65.73377 Y38.22348
G01 X65.67083 Y38.30016
G01 X65.61746 Y38.38002
G01 X65.54355 Y38.51832
G01 X65.50679 Y38.60707
G01 X65.48508 Y38.67855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.64586 Y36.45119 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.64586 Y36.45119
G01 X64.64429 Y36.46743
G01 X64.64429 Y36.56349
G01 X64.65968 Y36.71957
G01 X64.67586 Y36.80090
G01 X64.67840 Y36.81378
G01 X64.72394 Y36.96384
G01 X64.76070 Y37.05259
G01 X64.83461 Y37.19089
G01 X64.88797 Y37.27078
G01 X64.98747 Y37.39201
G01 X65.05541 Y37.45993
G01 X65.17662 Y37.55942
G01 X65.25650 Y37.61279
G01 X65.39481 Y37.68670
G01 X65.48355 Y37.72346
G01 X65.63362 Y37.76900
G01 X65.72783 Y37.78774
G01 X65.88391 Y37.80311
G01 X65.97997 Y37.80311
G01 X66.13603 Y37.78774
G01 X66.23021 Y37.76900
G01 X66.38030 Y37.72346
G01 X66.46907 Y37.68670
G01 X66.60738 Y37.61279
G01 X66.68723 Y37.55942
G01 X66.80847 Y37.45993
G01 X66.87639 Y37.39201
G01 X66.90639 Y37.35546
G01 X69.02787 Y37.35546
G01 X69.05787 Y37.39201
G01 X69.12579 Y37.45993
G01 X69.24702 Y37.55942
G01 X69.32690 Y37.61279
G01 X69.46521 Y37.68670
G01 X69.55395 Y37.72346
G01 X69.69231 Y37.76547
G01 X69.70455 Y37.76727
G01 X69.79932 Y37.77664
G01 X69.95616 Y37.78434
G01 X70.04849 Y37.78434
G01 X70.20531 Y37.77664
G01 X70.30005 Y37.76727
G01 X70.31225 Y37.76547
G01 X70.80234 Y37.76547
G01 X70.89792 Y37.77489
G01 X70.98982 Y37.80275
G01 X71.07458 Y37.84804
G01 X71.14882 Y37.90898
G01 X71.20976 Y37.98322
G01 X71.25504 Y38.06796
G01 X71.28293 Y38.15988
G01 X71.29233 Y38.25546
G01 X71.29233 Y39.85545
G01 X71.28293 Y39.95106
G01 X71.25504 Y40.04298
G01 X71.20976 Y40.12769
G01 X71.14882 Y40.20194
G01 X71.07458 Y40.26287
G01 X70.98982 Y40.30816
G01 X70.89792 Y40.33605
G01 X70.80234 Y40.34547
G01 X69.20234 Y40.34547
G01 X69.10674 Y40.33605
G01 X69.01479 Y40.30816
G01 X68.93008 Y40.26287
G01 X68.85584 Y40.20194
G01 X68.79493 Y40.12769
G01 X68.74961 Y40.04298
G01 X68.72175 Y39.95106
G01 X68.71629 Y39.89546
G01 X67.68924 Y39.89546
G01 X67.65922 Y39.93201
G01 X67.59132 Y39.99993
G01 X67.47006 Y40.09942
G01 X67.45871 Y40.10702
G01 X67.39023 Y40.15279
G01 X67.25193 Y40.22670
G01 X67.16318 Y40.26346
G01 X67.09165 Y40.28517
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X68.27689 Y43.64630 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X68.27689 Y43.64630
G01 X69.34694 Y43.64630
G01 X69.48995 Y43.78925
G01 X69.48995 Y43.86385
G01 X69.45340 Y43.89385
G01 X69.38548 Y43.96177
G01 X69.28596 Y44.08301
G01 X69.23262 Y44.16286
G01 X69.15868 Y44.30119
G01 X69.12193 Y44.38991
G01 X69.07641 Y44.54000
G01 X69.05992 Y44.62273
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X69.05992 Y45.05374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X69.05992 Y45.05374
G01 X69.07641 Y45.13662
G01 X69.10664 Y45.23629
G01 X69.11888 Y45.24587
G01 X69.15619 Y45.27630
G01 X69.22866 Y45.33802
G01 X69.32749 Y45.43774
G01 X69.34194 Y45.45524
G01 X69.39005 Y45.50820
G01 X69.40973 Y45.53086
G01 X69.49299 Y45.62661
G01 X69.54072 Y45.67635
G01 X69.55020 Y45.68531
G01 X69.66256 Y45.77510
G01 X69.69973 Y45.80287
G01 X69.71956 Y45.81394
G01 X69.85766 Y45.88821
G01 X69.86714 Y45.89324
G01 X69.92185 Y45.91346
G01 X70.04740 Y45.95402
G01 X70.07173 Y45.95971
G01 X70.13940 Y45.97208
G01 X70.23488 Y45.98475
G01 X70.29548 Y45.98773
G01 X70.36439 Y45.98773
G01 X70.42492 Y45.98475
G01 X70.52042 Y45.97208
G01 X70.58809 Y45.95971
G01 X70.61245 Y45.95402
G01 X70.73798 Y45.91346
G01 X70.79264 Y45.89324
G01 X70.80219 Y45.88821
G01 X70.94026 Y45.81394
G01 X70.96010 Y45.80284
G01 X70.96990 Y45.79591
G01 X70.99728 Y45.77510
G01 X71.10963 Y45.68531
G01 X71.11910 Y45.67635
G01 X71.16685 Y45.62661
G01 X71.24636 Y45.53515
G01 X71.26955 Y45.50800
G01 X71.31722 Y45.45494
G01 X71.32205 Y45.44958
G01 X71.36472 Y45.40299
G01 X71.43132 Y45.33810
G01 X71.50254 Y45.27597
G01 X71.55316 Y45.23639
G01 X71.58347 Y45.13662
G01 X71.59992 Y45.05374
G01 X71.59992 Y44.62273
G01 X71.58347 Y44.54000
G01 X71.53795 Y44.38991
G01 X71.50119 Y44.30119
G01 X71.42726 Y44.16286
G01 X71.37389 Y44.08301
G01 X71.27440 Y43.96177
G01 X71.20648 Y43.89385
G01 X71.16993 Y43.86385
G01 X71.16993 Y43.44130
G01 X71.16757 Y43.39329
G01 X71.16086 Y43.32499
G01 X71.14211 Y43.23078
G01 X71.13137 Y43.19548
G01 X71.11458 Y43.16746
G01 X71.06211 Y43.08888
G01 X71.02078 Y43.03317
G01 X70.96465 Y42.96472
G01 X70.91852 Y42.91382
G01 X70.88872 Y42.88253
G01 X70.63759 Y42.63140
G01 X70.09470 Y42.40653
G01 X70.07397 Y42.39853
G01 X70.00536 Y42.37397
G01 X69.97054 Y42.36337
G01 X69.90193 Y42.34620
G01 X69.87214 Y42.34026
G01 X69.80351 Y42.33008
G01 X69.77656 Y42.32741
G01 X69.70795 Y42.32406
G01 X69.69490 Y42.32373
G01 X67.45970 Y42.32373
G01 X67.44664 Y42.32340
G01 X67.37804 Y42.32004
G01 X67.35109 Y42.31738
G01 X67.28246 Y42.30719
G01 X67.26773 Y42.30462
G01 X67.25546 Y42.29599
G01 X67.19973 Y42.25469
G01 X67.17875 Y42.23749
G01 X67.12787 Y42.19134
G01 X67.11845 Y42.18237
G01 X62.51366 Y37.57758
G01 X62.50469 Y37.56813
G01 X62.45857 Y37.51726
G01 X62.44134 Y37.49628
G01 X62.40004 Y37.44058
G01 X62.38318 Y37.41528
G01 X62.34681 Y37.35462
G01 X62.32969 Y37.32254
G01 X62.29852 Y37.25665
G01 X62.28953 Y37.23631
G01 X62.16382 Y36.93285
G01 X62.14866 Y36.89869
G01 X62.12692 Y36.85272
G01 X62.10942 Y36.83834
G01 X62.04950 Y36.79392
G01 X62.04693 Y36.79221
G01 X61.99352 Y36.75310
G01 X61.98524 Y36.74649
G01 X61.92837 Y36.70494
G01 X61.86875 Y36.66511
G01 X61.85115 Y36.65366
G01 X61.78917 Y36.61429
G01 X61.76852 Y36.60083
G01 X61.74660 Y36.58617
G01 X61.72319 Y36.58388
G01 X61.67518 Y36.58152
G01 X61.42573 Y36.58152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.74660 Y36.58617 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.74660 Y36.58617
G01 X61.68369 Y36.46839
G01 X61.64693 Y36.37964
G01 X61.60142 Y36.22958
G01 X61.58493 Y36.14667
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.58493 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.58493 Y35.71566
G01 X61.60142 Y35.63296
G01 X61.63164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.53822 Y35.53329 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.53822 Y35.53329
G01 X61.56847 Y35.63296
G01 X61.58493 Y35.71566
G01 X61.58493 Y36.14667
G01 X61.56847 Y36.22958
G01 X61.52293 Y36.37964
G01 X61.48618 Y36.46839
G01 X61.42573 Y36.58152
G01 X61.39713 Y36.59867
G01 X61.30914 Y36.64583
G01 X61.15232 Y36.71998
G01 X61.08618 Y36.74746
G01 X60.92936 Y36.80357
G01 X60.87838 Y36.81909
G01 X60.72156 Y36.85836
G01 X60.68057 Y36.86654
G01 X60.52375 Y36.88980
G01 X60.48847 Y36.89328
G01 X60.33162 Y36.90098
G01 X60.29822 Y36.90098
G01 X60.14140 Y36.89328
G01 X60.10612 Y36.88980
G01 X59.94927 Y36.86654
G01 X59.90828 Y36.85836
G01 X59.75146 Y36.81909
G01 X59.70048 Y36.80357
G01 X59.54427 Y36.74769
G01 X59.54381 Y36.74726
G01 X59.49893 Y36.70240
G01 X59.39350 Y36.58607
G01 X59.35164 Y36.53504
G01 X59.25720 Y36.40768
G01 X59.21636 Y36.34652
G01 X59.13325 Y36.20786
G01 X59.09197 Y36.13049
G01 X59.04491 Y36.03103
G01 X59.04491 Y35.71566
G01 X59.02847 Y35.63296
G01 X58.99822 Y35.53329
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.04491 Y36.03103 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.04491 Y36.03103
G01 X59.04493 Y35.97754
G01 X59.04493 Y35.88498
G01 X59.04491 Y35.72742
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.04491 Y35.71566 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.04491 Y35.71566
G01 X59.06142 Y35.63296
G01 X59.09164 Y35.53324
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.50048 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.50048 Y31.08090
G01 X62.47693 Y31.09060
G01 X62.29466 Y31.14257
G01 X62.23347 Y31.15227
G01 X62.12242 Y31.16106
G01 X61.92694 Y31.16106
G01 X61.89253 Y31.16192
G01 X61.88592 Y31.16225
G01 X61.83883 Y31.16665
G01 X61.81849 Y31.16886
G01 X61.78252 Y31.17780
G01 X61.77134 Y31.18100
G01 X61.71963 Y31.19626
G01 X61.69441 Y31.20421
G01 X61.65641 Y31.22283
G01 X61.60873 Y31.24803
G01 X61.58196 Y31.26291
G01 X61.55153 Y31.28646
G01 X61.50980 Y31.32060
G01 X61.48369 Y31.34305
G01 X61.46118 Y31.36924
G01 X61.42705 Y31.41095
G01 X61.40353 Y31.44137
G01 X61.38869 Y31.46799
G01 X61.36352 Y31.51567
G01 X61.36139 Y31.51973
G01 X61.34480 Y31.55382
G01 X61.33680 Y31.57917
G01 X61.32156 Y31.63088
G01 X61.30944 Y31.67792
G01 X61.30726 Y31.69822
G01 X61.30284 Y31.74536
G01 X61.30251 Y31.75192
G01 X61.30167 Y31.78633
G01 X61.30167 Y33.03634
G01 X61.30251 Y33.07073
G01 X61.30284 Y33.07731
G01 X61.30726 Y33.12443
G01 X61.30944 Y33.14470
G01 X61.32156 Y33.19176
G01 X61.33680 Y33.24348
G01 X61.34480 Y33.26885
G01 X61.36350 Y33.30698
G01 X61.38869 Y33.35466
G01 X61.40353 Y33.38127
G01 X61.42700 Y33.41163
G01 X61.46111 Y33.45336
G01 X61.47434 Y33.46906
G01 X61.52161 Y33.48785
G01 X61.57554 Y33.50713
G01 X61.63512 Y33.52524
G01 X61.68902 Y33.53875
G01 X61.74297 Y33.54950
G01 X61.79690 Y33.55753
G01 X61.84803 Y33.56258
G01 X61.90193 Y33.56522
G01 X61.92694 Y33.56583
G01 X62.47693 Y33.56583
G01 X62.50192 Y33.56522
G01 X62.55582 Y33.56258
G01 X62.60695 Y33.55753
G01 X62.66088 Y33.54950
G01 X62.71483 Y33.53875
G01 X62.76873 Y33.52524
G01 X62.82831 Y33.50713
G01 X62.88224 Y33.48785
G01 X62.93342 Y33.46733
G01 X62.94566 Y33.45577
G01 X62.98676 Y33.41976
G01 X63.00253 Y33.40698
G01 X63.04236 Y33.37233
G01 X63.04449 Y33.37035
G01 X63.08811 Y33.33251
G01 X63.16232 Y33.27238
G01 X63.21305 Y33.23368
G01 X63.21516 Y33.23207
G01 X63.21564 Y33.23174
G01 X63.23428 Y33.13799
G01 X63.23957 Y33.08435
G01 X63.24193 Y33.03632
G01 X63.24193 Y31.78631
G01 X63.23957 Y31.73828
G01 X63.23885 Y31.73132
G01 X63.19692 Y31.69332
G01 X63.19199 Y31.68882
G01 X63.15610 Y31.65593
G01 X63.11561 Y31.62077
G01 X63.10616 Y31.61300
G01 X63.06725 Y31.57909
G01 X63.04526 Y31.55872
G01 X63.01279 Y31.53040
G01 X63.00058 Y31.52037
G01 X62.96898 Y31.49268
G01 X62.95382 Y31.47851
G01 X62.92509 Y31.45336
G01 X62.91191 Y31.44254
G01 X62.88361 Y31.41770
G01 X62.87104 Y31.40589
G01 X62.84373 Y31.38191
G01 X62.83012 Y31.37074
G01 X62.80281 Y31.34676
G01 X62.79024 Y31.33495
G01 X62.76194 Y31.31011
G01 X62.74876 Y31.29929
G01 X62.72003 Y31.27414
G01 X62.70487 Y31.25997
G01 X62.67327 Y31.23228
G01 X62.66105 Y31.22225
G01 X62.62859 Y31.19393
G01 X62.60660 Y31.17356
G01 X62.56768 Y31.13965
G01 X62.55824 Y31.13188
G01 X62.51775 Y31.09672
G01 X62.50048 Y31.08090
G01 X62.50642 Y31.06142
G01 X62.51427 Y31.03426
G01 X62.52202 Y31.00571
G01 X62.53205 Y30.97158
G01 X62.53370 Y30.96634
G01 X62.56705 Y30.79799
G01 X62.56949 Y30.76700
G01 X62.57167 Y30.71181
G01 X62.57167 Y29.71633
G01 X62.57251 Y29.68192
G01 X62.57284 Y29.67534
G01 X62.57726 Y29.62822
G01 X62.57944 Y29.60795
G01 X62.59156 Y29.56089
G01 X62.60680 Y29.50917
G01 X62.61490 Y29.48354
G01 X62.63197 Y29.44486
G01 X62.65199 Y29.39441
G01 X62.65470 Y29.38679
G01 X62.67805 Y29.32873
G01 X62.67911 Y29.32634
G01 X62.70045 Y29.27412
G01 X62.73108 Y29.19099
G01 X62.75125 Y29.13056
G01 X62.76375 Y29.08906
G01 X62.76372 Y29.08903
G01 X62.74881 Y29.04887
G01 X62.72161 Y28.99403
G01 X62.67340 Y28.91809
G01 X62.66492 Y28.91532
G01 X62.66492 Y28.91534
G01 X62.58567 Y28.88961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.86693 Y31.08974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.86693 Y31.08974
G01 X59.86693 Y31.11846
G01 X59.92342 Y31.16482
G01 X59.98435 Y31.23909
G01 X60.02964 Y31.32380
G01 X60.05753 Y31.41572
G01 X60.06693 Y31.51130
G01 X60.06693 Y31.57132
G01 X60.08692 Y31.57132
G01 X60.08692 Y31.47508
G01 X60.08237 Y31.42390
G01 X60.05298 Y31.32116
G01 X60.00498 Y31.22926
G01 X59.93939 Y31.14884
G01 X59.86693 Y31.08974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.06507 Y33.33032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.06507 Y33.33032
G01 X60.08692 Y33.33032
G01 X60.08692 Y33.25133
G01 X60.06693 Y33.25133
G01 X60.06693 Y33.31132
G01 X60.06507 Y33.33032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.49805 Y33.23368 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.49805 Y33.23368
G01 X57.55756 Y33.23675
G01 X57.61809 Y33.24571
G01 X57.71728 Y33.27124
G01 X57.80897 Y33.31678
G01 X57.82601 Y33.33032
G01 X57.98880 Y33.33032
G01 X57.98695 Y33.31132
G01 X57.98695 Y31.73132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.52385 Y31.73132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.52385 Y31.73132
G01 X57.98695 Y31.73132
G01 X58.03190 Y31.68636
G01 X58.07163 Y31.64468
G01 X58.12050 Y31.59078
G01 X58.17371 Y31.52619
G01 X58.18474 Y31.51130
G01 X58.21425 Y31.47419
G01 X58.25027 Y31.43215
G01 X58.28956 Y31.39126
G01 X58.32154 Y31.36170
G01 X58.36337 Y31.32766
G01 X58.39883 Y31.30231
G01 X58.44694 Y31.27208
G01 X58.47694 Y31.25555
G01 X58.49561 Y31.24478
G01 X58.54953 Y31.21247
G01 X58.61214 Y31.17048
G01 X58.62593 Y31.16025
G01 X58.63729 Y31.12177
G01 X58.64940 Y31.07470
G01 X58.65159 Y31.05443
G01 X58.65601 Y31.00731
G01 X58.65634 Y31.00074
G01 X58.65718 Y30.96634
G01 X58.65718 Y29.71633
G01 X58.65634 Y29.68192
G01 X58.65601 Y29.67534
G01 X58.65159 Y29.62822
G01 X58.64940 Y29.60795
G01 X58.63729 Y29.56089
G01 X58.62205 Y29.50917
G01 X58.61405 Y29.48380
G01 X58.59535 Y29.44567
G01 X58.57016 Y29.39800
G01 X58.55532 Y29.37138
G01 X58.53185 Y29.34102
G01 X58.49774 Y29.29929
G01 X58.47486 Y29.27272
G01 X58.46856 Y29.26574
G01 X58.46485 Y29.26167
G01 X58.45161 Y29.24727
G01 X58.41611 Y29.20559
G01 X58.38291 Y29.16350
G01 X58.36779 Y29.14494
G01 X58.34090 Y29.11283
G01 X58.33056 Y29.10023
G01 X58.26995 Y29.02515
G01 X58.24112 Y28.98786
G01 X58.23531 Y28.97996
G01 X58.22782 Y28.97770
G01 X58.13361 Y28.95898
G01 X58.07996 Y28.95367
G01 X58.03193 Y28.95131
G01 X57.48194 Y28.95131
G01 X57.43391 Y28.95367
G01 X57.38027 Y28.95898
G01 X57.28606 Y28.97770
G01 X57.23447 Y28.99335
G01 X57.14572 Y29.03010
G01 X57.09818 Y29.05553
G01 X57.01900 Y29.10844
G01 X57.01878 Y29.10927
G01 X57.01804 Y29.11181
G01 X57.00110 Y29.17272
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.92386 Y28.95865 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.92386 Y28.95865
G01 X56.98372 Y28.94047
G01 X57.07247 Y28.90371
G01 X57.21077 Y28.82977
G01 X57.29066 Y28.77643
G01 X57.41187 Y28.67691
G01 X57.47979 Y28.60900
G01 X57.57928 Y28.48776
G01 X57.63264 Y28.40790
G01 X57.70658 Y28.26963
G01 X57.74334 Y28.18088
G01 X57.78888 Y28.03079
G01 X57.80531 Y27.94791
G01 X57.80534 Y27.63277
G01 X57.85238 Y27.53325
G01 X57.89363 Y27.45596
G01 X57.97674 Y27.31730
G01 X58.01763 Y27.25601
G01 X58.11209 Y27.12868
G01 X58.15388 Y27.07773
G01 X58.25934 Y26.96137
G01 X58.30422 Y26.91649
G01 X58.42058 Y26.81103
G01 X58.47153 Y26.76925
G01 X58.56856 Y26.69726
G01 X58.60587 Y26.68794
G01 X58.67249 Y26.67463
G01 X58.82931 Y26.65137
G01 X58.88946 Y26.64542
G01 X59.04630 Y26.63775
G01 X59.10434 Y26.63775
G01 X59.26119 Y26.64542
G01 X59.32134 Y26.65137
G01 X59.47816 Y26.67463
G01 X59.54478 Y26.68794
G01 X59.70160 Y26.72721
G01 X59.77945 Y26.75091
G01 X59.93627 Y26.80699
G01 X59.99535 Y26.83153
G01 X60.01979 Y26.85591
G01 X60.11928 Y26.97717
G01 X60.17264 Y27.05706
G01 X60.24658 Y27.19533
G01 X60.28334 Y27.28408
G01 X60.32888 Y27.43414
G01 X60.34760 Y27.52835
G01 X60.36299 Y27.68444
G01 X60.36299 Y27.78050
G01 X60.34760 Y27.93656
G01 X60.32888 Y28.03079
G01 X60.28334 Y28.18088
G01 X60.24658 Y28.26963
G01 X60.17264 Y28.40790
G01 X60.11928 Y28.48776
G01 X60.01979 Y28.60900
G01 X59.95187 Y28.67691
G01 X59.91534 Y28.70691
G01 X59.91534 Y28.74011
G01 X60.03830 Y28.62601
G01 X60.16073 Y28.47252
G01 X60.25890 Y28.30244
G01 X60.31275 Y28.16528
G01 X60.36683 Y28.06419
G01 X60.39314 Y28.02642
G01 X60.45085 Y27.95792
G01 X60.52006 Y27.90105
G01 X60.59847 Y27.85776
G01 X60.65451 Y27.83318
G01 X60.75199 Y27.80211
G01 X60.85384 Y27.79195
G01 X60.95555 Y27.80321
G01 X61.01534 Y27.81624
G01 X61.02237 Y27.81855
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.33500 Y26.83158 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.33500 Y26.83158
G01 X59.99535 Y26.83153
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.80534 Y27.63277 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.80534 Y27.63277
G01 X57.80534 Y27.77877
G01 X57.80531 Y27.92477
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X57.80531 Y27.94791 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X57.80531 Y27.94791
G01 X57.82180 Y28.03079
G01 X57.86734 Y28.18088
G01 X57.90409 Y28.26963
G01 X57.97803 Y28.40790
G01 X58.03140 Y28.48776
G01 X58.13089 Y28.60900
G01 X58.19881 Y28.67691
G01 X58.23531 Y28.70689
G01 X58.23531 Y28.97996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X56.78548 Y31.08090 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X56.78548 Y31.08090
G01 X56.80275 Y31.09672
G01 X56.84324 Y31.13188
G01 X56.85268 Y31.13965
G01 X56.89160 Y31.17356
G01 X56.91359 Y31.19393
G01 X56.94605 Y31.22225
G01 X56.95827 Y31.23228
G01 X56.98987 Y31.25997
G01 X57.00503 Y31.27414
G01 X57.03376 Y31.29929
G01 X57.04694 Y31.31011
G01 X57.07524 Y31.33495
G01 X57.08781 Y31.34676
G01 X57.11512 Y31.37074
G01 X57.12873 Y31.38191
G01 X57.15604 Y31.40589
G01 X57.16861 Y31.41770
G01 X57.19691 Y31.44254
G01 X57.21009 Y31.45336
G01 X57.23882 Y31.47851
G01 X57.25398 Y31.49268
G01 X57.28558 Y31.52037
G01 X57.29779 Y31.53040
G01 X57.33026 Y31.55872
G01 X57.35225 Y31.57909
G01 X57.39116 Y31.61300
G01 X57.40061 Y31.62077
G01 X57.44110 Y31.65593
G01 X57.47699 Y31.68882
G01 X57.48194 Y31.69332
G01 X57.52385 Y31.73132
G01 X57.52457 Y31.73828
G01 X57.52693 Y31.78631
G01 X57.52693 Y33.03632
G01 X57.52457 Y33.08435
G01 X57.51928 Y33.13799
G01 X57.50064 Y33.23174
G01 X57.50016 Y33.23207
G01 X57.49805 Y33.23368
G01 X57.44732 Y33.27238
G01 X57.37311 Y33.33251
G01 X57.32949 Y33.37035
G01 X57.32736 Y33.37233
G01 X57.28753 Y33.40698
G01 X57.27176 Y33.41976
G01 X57.23066 Y33.45577
G01 X57.21842 Y33.46733
G01 X57.16724 Y33.48785
G01 X57.11331 Y33.50713
G01 X57.05373 Y33.52524
G01 X56.99983 Y33.53875
G01 X56.94588 Y33.54950
G01 X56.89195 Y33.55753
G01 X56.84082 Y33.56258
G01 X56.78692 Y33.56522
G01 X56.76193 Y33.56583
G01 X56.21192 Y33.56583
G01 X56.18693 Y33.56522
G01 X56.13303 Y33.56258
G01 X56.08190 Y33.55753
G01 X56.02797 Y33.54950
G01 X55.97402 Y33.53875
G01 X55.92012 Y33.52524
G01 X55.86054 Y33.50713
G01 X55.80661 Y33.48785
G01 X55.75934 Y33.46906
G01 X55.74611 Y33.45336
G01 X55.71200 Y33.41163
G01 X55.68853 Y33.38127
G01 X55.67369 Y33.35466
G01 X55.64850 Y33.30698
G01 X55.62980 Y33.26885
G01 X55.62180 Y33.24348
G01 X55.60656 Y33.19176
G01 X55.59444 Y33.14470
G01 X55.59226 Y33.12443
G01 X55.58784 Y33.07731
G01 X55.58751 Y33.07073
G01 X55.58667 Y33.03634
G01 X55.58667 Y31.78633
G01 X55.58751 Y31.75192
G01 X55.58784 Y31.74536
G01 X55.59226 Y31.69822
G01 X55.59444 Y31.67792
G01 X55.60656 Y31.63088
G01 X55.62180 Y31.57917
G01 X55.62980 Y31.55382
G01 X55.64639 Y31.51973
G01 X55.64852 Y31.51567
G01 X55.67369 Y31.46799
G01 X55.68853 Y31.44137
G01 X55.71205 Y31.41095
G01 X55.74618 Y31.36924
G01 X55.76869 Y31.34305
G01 X55.79480 Y31.32060
G01 X55.83653 Y31.28646
G01 X55.86696 Y31.26291
G01 X55.89373 Y31.24803
G01 X55.94141 Y31.22283
G01 X55.97941 Y31.20421
G01 X56.00463 Y31.19626
G01 X56.05634 Y31.18100
G01 X56.06752 Y31.17780
G01 X56.10349 Y31.16886
G01 X56.12383 Y31.16665
G01 X56.17092 Y31.16225
G01 X56.17753 Y31.16192
G01 X56.21192 Y31.16106
G01 X56.40745 Y31.16106
G01 X56.51847 Y31.15227
G01 X56.57966 Y31.14257
G01 X56.76193 Y31.09060
G01 X56.78548 Y31.08090
G01 X56.79142 Y31.06142
G01 X56.79927 Y31.03426
G01 X56.80702 Y31.00571
G01 X56.81705 Y30.97158
G01 X56.81870 Y30.96634
G01 X56.85205 Y30.79799
G01 X56.85449 Y30.76700
G01 X56.85667 Y30.71181
G01 X56.85667 Y29.71633
G01 X56.85751 Y29.68192
G01 X56.85784 Y29.67534
G01 X56.86226 Y29.62822
G01 X56.86444 Y29.60793
G01 X56.87656 Y29.56089
G01 X56.87971 Y29.55024
G01 X56.89180 Y29.50917
G01 X56.90958 Y29.45657
G01 X56.91456 Y29.44356
G01 X56.93216 Y29.39182
G01 X56.94590 Y29.34577
G01 X56.95459 Y29.31857
G01 X56.96630 Y29.28385
G01 X56.97280 Y29.26376
G01 X57.00110 Y29.17272
G01 X57.01806 Y29.11184
G01 X57.01804 Y29.11181
G01 X57.00755 Y29.08296
G01 X56.95322 Y28.99614
G01 X56.92386 Y28.95865
G01 X56.90836 Y28.95372
G01 X56.81639 Y28.92896
G01 X56.73008 Y28.90991
G01 X56.63795 Y28.89510
G01 X56.57928 Y28.88928
G01 X56.57036 Y28.88845
G01 X56.50087 Y28.88240
G01 X56.47430 Y28.88057
G01 X56.44034 Y28.87892
G01 X56.34486 Y28.86625
G01 X56.27704 Y28.85385
G01 X56.25279 Y28.84816
G01 X56.12721 Y28.80760
G01 X56.07257 Y28.78740
G01 X56.06307 Y28.78235
G01 X55.92497 Y28.70808
G01 X55.90514 Y28.69703
G01 X55.86798 Y28.66927
G01 X55.75561 Y28.57946
G01 X55.74613 Y28.57051
G01 X55.69841 Y28.52078
G01 X55.69028 Y28.51143
G01 X55.62746 Y28.43915
G01 X55.59858 Y28.39980
G01 X55.56066 Y28.34242
G01 X55.52365 Y28.27996
G01 X55.48680 Y28.20404
G01 X55.48301 Y28.19614
G01 X55.45726 Y28.14141
G01 X55.43348 Y28.09520
G01 X55.40283 Y28.04057
G01 X55.37923 Y28.00122
G01 X55.33343 Y27.92962
G01 X55.25185 Y27.82276
G01 X55.25182 Y27.82274
G01 X55.24771 Y27.78050
G01 X55.24771 Y27.68444
G01 X55.26308 Y27.52835
G01 X55.28180 Y27.43414
G01 X55.32734 Y27.28408
G01 X55.36409 Y27.19533
G01 X55.43803 Y27.05706
G01 X55.49140 Y26.97717
G01 X55.59089 Y26.85591
G01 X55.65881 Y26.78802
G01 X55.78002 Y26.68850
G01 X55.85990 Y26.63516
G01 X55.99820 Y26.56125
G01 X56.08695 Y26.52447
G01 X56.23701 Y26.47895
G01 X56.33125 Y26.46023
G01 X56.48731 Y26.44481
G01 X56.58337 Y26.44481
G01 X56.63041 Y26.44946
G01 X57.19830 Y25.88157
G01 X57.88276 Y25.59805
G01 X57.90262 Y25.59038
G01 X57.97122 Y25.56582
G01 X58.00442 Y25.55576
G01 X58.07303 Y25.53857
G01 X58.10127 Y25.53293
G01 X58.16990 Y25.52274
G01 X58.19535 Y25.52025
G01 X58.26398 Y25.51688
G01 X58.27625 Y25.51657
G01 X65.68172 Y25.51657
G01 X65.69402 Y25.51688
G01 X65.76265 Y25.52025
G01 X65.78807 Y25.52274
G01 X65.85671 Y25.53293
G01 X65.87070 Y25.53534
G01 X65.88231 Y25.54352
G01 X65.93801 Y25.58485
G01 X65.95780 Y25.60110
G01 X66.00870 Y25.64725
G01 X66.01759 Y25.65569
G01 X66.67799 Y26.31609
G01 X66.68645 Y26.32498
G01 X66.73260 Y26.37585
G01 X66.74883 Y26.39566
G01 X66.79016 Y26.45137
G01 X66.80613 Y26.47532
G01 X66.80898 Y26.48009
G01 X66.81835 Y26.54334
G01 X66.82104 Y26.57029
G01 X66.82439 Y26.63890
G01 X66.82472 Y26.65190
G01 X66.82472 Y30.20793
G01 X66.82505 Y30.22096
G01 X66.82841 Y30.28959
G01 X66.83107 Y30.31654
G01 X66.84126 Y30.38517
G01 X66.84720 Y30.41496
G01 X66.86435 Y30.48357
G01 X66.87497 Y30.51839
G01 X66.89953 Y30.58700
G01 X66.90753 Y30.60772
G01 X67.18210 Y31.27064
G01 X67.18213 Y31.53637
G01 X68.78121 Y33.13548
G01 X69.02787 Y33.13548
G01 X69.05787 Y33.09893
G01 X69.12579 Y33.03101
G01 X69.24702 Y32.93152
G01 X69.32690 Y32.87815
G01 X69.46521 Y32.80421
G01 X69.55395 Y32.76746
G01 X69.70402 Y32.72194
G01 X69.78677 Y32.70548
G01 X70.21781 Y32.70548
G01 X70.30064 Y32.68900
G01 X70.45073 Y32.64346
G01 X70.53947 Y32.60670
G01 X70.67778 Y32.53279
G01 X70.75764 Y32.47942
G01 X70.87887 Y32.37993
G01 X70.94679 Y32.31201
G01 X71.04628 Y32.19078
G01 X71.09965 Y32.11089
G01 X71.17359 Y31.97259
G01 X71.21034 Y31.88384
G01 X71.25586 Y31.73378
G01 X71.27460 Y31.63957
G01 X71.28997 Y31.48349
G01 X71.28997 Y31.38743
G01 X71.27460 Y31.23137
G01 X71.25586 Y31.13716
G01 X71.21034 Y30.98707
G01 X71.17359 Y30.89832
G01 X71.09965 Y30.76002
G01 X71.04628 Y30.68016
G01 X70.94679 Y30.55893
G01 X70.87887 Y30.49101
G01 X70.75764 Y30.39152
G01 X70.67778 Y30.33815
G01 X70.53947 Y30.26421
G01 X70.45073 Y30.22746
G01 X70.30064 Y30.18194
G01 X70.21781 Y30.16548
G01 X69.78677 Y30.16548
G01 X69.70402 Y30.18194
G01 X69.55395 Y30.22746
G01 X69.46521 Y30.26421
G01 X69.32690 Y30.33815
G01 X69.24702 Y30.39152
G01 X69.12579 Y30.49101
G01 X69.05787 Y30.55893
G01 X69.02787 Y30.59548
G01 X68.88278 Y30.59548
G01 X68.14730 Y29.85997
G01 X68.14728 Y28.98466
G01 X67.87270 Y28.32172
G01 X67.86468 Y28.30099
G01 X67.84014 Y28.23239
G01 X67.82957 Y28.19757
G01 X67.81238 Y28.12896
G01 X67.80641 Y28.09914
G01 X67.79625 Y28.03054
G01 X67.79361 Y28.00359
G01 X67.79023 Y27.93496
G01 X67.78992 Y27.92190
G01 X67.78992 Y26.27367
G01 X67.78959 Y26.26061
G01 X67.78622 Y26.19201
G01 X67.78355 Y26.16506
G01 X67.77339 Y26.09645
G01 X67.76745 Y26.06663
G01 X67.76328 Y26.05005
G01 X67.73196 Y26.00783
G01 X67.71319 Y25.98495
G01 X67.66706 Y25.93407
G01 X67.65726 Y25.92376
G01 X66.42516 Y24.69165
G01 X66.41484 Y24.68183
G01 X66.36397 Y24.63567
G01 X66.34108 Y24.61693
G01 X66.28538 Y24.57560
G01 X66.28233 Y24.57339
G01 X66.25472 Y24.56803
G01 X66.18609 Y24.55787
G01 X66.15759 Y24.55508
G01 X66.08901 Y24.55170
G01 X66.07525 Y24.55137
G01 X53.43506 Y24.55137
G01 X53.42130 Y24.55170
G01 X53.35267 Y24.55508
G01 X53.32419 Y24.55787
G01 X53.25556 Y24.56803
G01 X53.22422 Y24.57431
G01 X53.15561 Y24.59148
G01 X53.11914 Y24.60258
G01 X53.05053 Y24.62711
G01 X53.02894 Y24.63547
G01 X52.38757 Y24.90113
G01 X49.09921 Y24.90113
G01 X47.89992 Y26.10039
G01 X47.50289 Y26.49742
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.29914 Y27.99871 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.29914 Y27.99871
G01 X46.31560 Y28.08156
G01 X46.36114 Y28.23165
G01 X46.39789 Y28.32040
G01 X46.47183 Y28.45870
G01 X46.52520 Y28.53856
G01 X46.62469 Y28.65980
G01 X46.69261 Y28.72771
G01 X46.81382 Y28.82721
G01 X46.89370 Y28.88057
G01 X47.03200 Y28.95451
G01 X47.12075 Y28.99127
G01 X47.27081 Y29.03678
G01 X47.36505 Y29.05553
G01 X47.52111 Y29.07089
G01 X47.61717 Y29.07089
G01 X47.77323 Y29.05553
G01 X47.86746 Y29.03678
G01 X48.01752 Y28.99127
G01 X48.10627 Y28.95451
G01 X48.24457 Y28.88057
G01 X48.32446 Y28.82721
G01 X48.44567 Y28.72771
G01 X48.51359 Y28.65980
G01 X48.61308 Y28.53856
G01 X48.66644 Y28.45870
G01 X48.74038 Y28.32040
G01 X48.77714 Y28.23165
G01 X48.82268 Y28.08156
G01 X48.84140 Y27.98736
G01 X48.85679 Y27.83130
G01 X48.85679 Y27.73526
G01 X48.84663 Y27.63229
G01 X48.84140 Y27.57918
G01 X48.82268 Y27.48494
G01 X48.77714 Y27.33488
G01 X48.74038 Y27.24613
G01 X48.66644 Y27.10783
G01 X48.61308 Y27.02795
G01 X48.51359 Y26.90671
G01 X48.44567 Y26.83879
G01 X48.32446 Y26.73930
G01 X48.24457 Y26.68594
G01 X48.10627 Y26.61202
G01 X48.01752 Y26.57529
G01 X47.86746 Y26.52973
G01 X47.77323 Y26.51101
G01 X47.61717 Y26.49561
G01 X47.52111 Y26.49561
G01 X47.50289 Y26.49742
G01 X47.36990 Y26.56033
G01 X47.29261 Y26.60161
G01 X47.15395 Y26.68472
G01 X47.09266 Y26.72559
G01 X46.96533 Y26.82005
G01 X46.91438 Y26.86183
G01 X46.79802 Y26.96732
G01 X46.75314 Y27.01220
G01 X46.64768 Y27.12856
G01 X46.60589 Y27.17948
G01 X46.51143 Y27.30681
G01 X46.47054 Y27.36810
G01 X46.38743 Y27.50676
G01 X46.34618 Y27.58405
G01 X46.29914 Y27.68355
G01 X46.29914 Y27.99871
G01 X46.28268 Y28.08156
G01 X46.23714 Y28.23165
G01 X46.20038 Y28.32040
G01 X46.12644 Y28.45870
G01 X46.07308 Y28.53856
G01 X45.97359 Y28.65980
G01 X45.90567 Y28.72771
G01 X45.78446 Y28.82721
G01 X45.70457 Y28.88057
G01 X45.56627 Y28.95451
G01 X45.47752 Y28.99127
G01 X45.44908 Y28.99990
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.37608 Y24.86674 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.37608 Y24.86674
G01 X41.35759 Y24.81820
G01 X41.35757 Y24.81817
G01 X41.31538 Y24.79000
G01 X41.17707 Y24.71606
G01 X41.08833 Y24.67931
G01 X40.93824 Y24.63379
G01 X40.84403 Y24.61505
G01 X40.68797 Y24.59968
G01 X40.59191 Y24.59968
G01 X40.43583 Y24.61505
G01 X40.36963 Y24.62818
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.38401 Y26.16841 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.38401 Y26.16841
G01 X39.38277 Y26.16732
G01 X39.36768 Y26.09145
G01 X39.35229 Y25.93537
G01 X39.35229 Y25.83928
G01 X39.36768 Y25.68325
G01 X39.38231 Y25.60966
G01 X39.38256 Y25.60941
G01 X39.40042 Y25.59330
G01 X39.51172 Y25.47558
G01 X39.51965 Y25.46559
G01 X39.55351 Y25.42556
G01 X39.57179 Y25.40532
G01 X39.64340 Y25.31208
G01 X39.65170 Y25.29922
G01 X39.66527 Y25.27740
G01 X39.66621 Y25.27580
G01 X39.70319 Y25.22000
G01 X39.73204 Y25.18068
G01 X39.80301 Y25.09905
G01 X39.85074 Y25.04931
G01 X39.86021 Y25.04035
G01 X39.97258 Y24.95053
G01 X40.00967 Y24.92285
G01 X40.01030 Y24.92249
G01 X40.02943 Y24.91144
G01 X40.10441 Y24.86143
G01 X40.15376 Y24.82389
G01 X40.15848 Y24.82028
G01 X40.21982 Y24.77281
G01 X40.34736 Y24.65292
G01 X40.36580 Y24.63224
G01 X40.36963 Y24.62821
G01 X40.36963 Y24.62818
G01 X40.37164 Y24.62612
G01 X40.37880 Y24.57225
G01 X40.38162 Y24.46979
G01 X40.36308 Y24.36897
G01 X40.32396 Y24.27423
G01 X40.29483 Y24.22043
G01 X40.25010 Y24.15211
G01 X40.19465 Y24.09219
G01 X40.19168 Y24.08947
G01 X40.18406 Y24.08266
G01 X40.03517 Y23.95206
G01 X39.88736 Y23.78353
G01 X39.76283 Y23.59717
G01 X39.75452 Y23.58033
G01 X39.78622 Y23.58033
G01 X39.81703 Y23.63799
G01 X39.87040 Y23.71784
G01 X40.01962 Y23.89968
G01 X40.08757 Y23.96763
G01 X40.26941 Y24.11685
G01 X40.34926 Y24.17022
G01 X40.55673 Y24.28111
G01 X40.64548 Y24.31787
G01 X40.87060 Y24.38614
G01 X40.96481 Y24.40489
G01 X41.19892 Y24.42795
G01 X41.29496 Y24.42795
G01 X41.44174 Y24.41350
G01 X41.52907 Y24.40489
G01 X41.62328 Y24.38614
G01 X41.84840 Y24.31787
G01 X41.93714 Y24.28111
G01 X42.14461 Y24.17022
G01 X42.22447 Y24.11685
G01 X42.40631 Y23.96763
G01 X42.47425 Y23.89968
G01 X42.62348 Y23.71784
G01 X42.67684 Y23.63799
G01 X42.70765 Y23.58033
G01 X42.73930 Y23.58033
G01 X42.73100 Y23.59717
G01 X42.60646 Y23.78355
G01 X42.45866 Y23.95211
G01 X42.29013 Y24.09989
G01 X42.10377 Y24.22442
G01 X41.90275 Y24.32353
G01 X41.74001 Y24.37878
G01 X41.66945 Y24.40911
G01 X41.60448 Y24.45008
G01 X41.55543 Y24.48668
G01 X41.48012 Y24.55625
G01 X41.42097 Y24.63999
G01 X41.38050 Y24.73415
G01 X41.36237 Y24.79259
G01 X41.35729 Y24.81744
G01 X41.37608 Y24.86674
G01 X41.45167 Y25.02180
G01 X41.46788 Y25.04819
G01 X41.49061 Y25.08774
G01 X41.49582 Y25.09747
G01 X41.55038 Y25.18424
G01 X41.57667 Y25.22005
G01 X41.61461 Y25.27746
G01 X41.65160 Y25.33986
G01 X41.68845 Y25.41583
G01 X41.71545 Y25.47911
G01 X41.72823 Y25.51370
G01 X41.76041 Y25.62935
G01 X41.77563 Y25.69671
G01 X41.77580 Y25.69780
G01 X41.78987 Y25.85289
G01 X41.79214 Y25.88733
G01 X41.78987 Y25.92180
G01 X41.77580 Y26.07692
G01 X41.77563 Y26.07796
G01 X41.76041 Y26.14535
G01 X41.72823 Y26.26094
G01 X41.71545 Y26.29559
G01 X41.68845 Y26.35886
G01 X41.65157 Y26.43481
G01 X41.61461 Y26.49719
G01 X41.57667 Y26.55464
G01 X41.54781 Y26.59396
G01 X41.47685 Y26.67560
G01 X41.42912 Y26.72538
G01 X41.41962 Y26.73432
G01 X41.30727 Y26.82411
G01 X41.27009 Y26.85185
G01 X41.25033 Y26.86292
G01 X41.11220 Y26.93719
G01 X41.10263 Y26.94230
G01 X41.04799 Y26.96249
G01 X40.92244 Y27.00303
G01 X40.89811 Y27.00872
G01 X40.83036 Y27.02111
G01 X40.73494 Y27.03376
G01 X40.67433 Y27.03674
G01 X40.60552 Y27.03674
G01 X40.54492 Y27.03376
G01 X40.44947 Y27.02111
G01 X40.38170 Y27.00872
G01 X40.35739 Y27.00303
G01 X40.23186 Y26.96249
G01 X40.17720 Y26.94225
G01 X40.16765 Y26.93719
G01 X40.02953 Y26.86292
G01 X40.00974 Y26.85185
G01 X39.97258 Y26.82411
G01 X39.86034 Y26.73442
G01 X39.85826 Y26.73242
G01 X39.85803 Y26.73221
G01 X39.85074 Y26.72538
G01 X39.80301 Y26.67560
G01 X39.73204 Y26.59396
G01 X39.70319 Y26.55464
G01 X39.66621 Y26.49881
G01 X39.66524 Y26.49724
G01 X39.60126 Y26.40671
G01 X39.57078 Y26.36991
G01 X39.56151 Y26.35853
G01 X39.52163 Y26.30849
G01 X39.39930 Y26.18172
G01 X39.38401 Y26.16841
G01 X39.34921 Y26.16298
G01 X39.28810 Y26.15993
G01 X39.18579 Y26.16557
G01 X39.08686 Y26.19234
G01 X39.08556 Y26.19302
G01 X38.87495 Y25.98241
G01 X38.87957 Y25.93537
G01 X38.87957 Y25.83928
G01 X38.87820 Y25.82536
G01 X38.87495 Y25.79224
G01 X39.08620 Y25.58099
G01 X39.09796 Y25.58624
G01 X39.19806 Y25.60750
G01 X39.25889 Y25.61390
G01 X39.36133 Y25.61390
G01 X39.38256 Y25.60941
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X42.08693 Y21.24795 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X42.08693 Y21.24795
G01 X42.08693 Y21.27957
G01 X42.14461 Y21.31041
G01 X42.22447 Y21.36377
G01 X42.40631 Y21.51300
G01 X42.47425 Y21.58094
G01 X42.62348 Y21.76278
G01 X42.67684 Y21.84264
G01 X42.70768 Y21.90032
G01 X42.73930 Y21.90032
G01 X42.73100 Y21.88348
G01 X42.60646 Y21.69710
G01 X42.45866 Y21.52854
G01 X42.29015 Y21.38076
G01 X42.10377 Y21.25625
G01 X42.08693 Y21.24795
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.75452 Y21.90032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.75452 Y21.90032
G01 X39.76283 Y21.88348
G01 X39.88736 Y21.69712
G01 X40.03514 Y21.52859
G01 X40.20370 Y21.38079
G01 X40.39008 Y21.25625
G01 X40.40692 Y21.24795
G01 X40.40692 Y21.27960
G01 X40.34926 Y21.31041
G01 X40.26941 Y21.36377
G01 X40.08757 Y21.51300
G01 X40.01962 Y21.58094
G01 X39.87040 Y21.76278
G01 X39.81703 Y21.84264
G01 X39.78620 Y21.90032
G01 X39.75452 Y21.90032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X37.47299 Y24.58045 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X37.47299 Y24.58045
G01 X37.49374 Y24.57736
G01 X37.69009 Y24.57736
G01 X37.71086 Y24.58045
G01 X37.68701 Y24.60433
G01 X37.63997 Y24.59968
G01 X37.54391 Y24.59968
G01 X37.49684 Y24.60433
G01 X37.47299 Y24.58045
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.42499 Y26.39846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.42499 Y26.39846
G01 X34.44884 Y26.42231
G01 X34.49591 Y26.41766
G01 X34.59197 Y26.41766
G01 X34.74803 Y26.43305
G01 X34.84224 Y26.45177
G01 X34.99233 Y26.49734
G01 X35.08107 Y26.53407
G01 X35.21938 Y26.60798
G01 X35.29924 Y26.66137
G01 X35.42047 Y26.76084
G01 X35.48839 Y26.82879
G01 X35.58788 Y26.94999
G01 X35.64125 Y27.02988
G01 X35.71519 Y27.16818
G01 X35.75194 Y27.25693
G01 X35.79746 Y27.40699
G01 X35.81620 Y27.50123
G01 X35.83157 Y27.65731
G01 X35.83157 Y27.75335
G01 X35.82695 Y27.80041
G01 X35.84884 Y27.82231
G01 X35.85760 Y27.70531
G01 X35.84018 Y27.47293
G01 X35.83256 Y27.39320
G01 X35.83406 Y27.34339
G01 X35.84559 Y27.25142
G01 X35.87424 Y27.16328
G01 X35.91900 Y27.08210
G01 X35.95346 Y27.03155
G01 X36.01971 Y26.95337
G01 X36.10076 Y26.89074
G01 X36.19306 Y26.84629
G01 X36.25064 Y26.82566
G01 X36.35011 Y26.80143
G01 X36.45242 Y26.79836
G01 X36.55316 Y26.81659
G01 X36.61191 Y26.83374
G01 X36.68387 Y26.86102
G01 X36.75064 Y26.89925
G01 X36.93512 Y27.02500
G01 X37.11198 Y27.11019
G01 X37.29959 Y27.16805
G01 X37.49374 Y27.19734
G01 X37.69011 Y27.19734
G01 X37.71086 Y27.19419
G01 X37.68699 Y27.17031
G01 X37.63997 Y27.17496
G01 X37.54391 Y27.17496
G01 X37.38783 Y27.15957
G01 X37.29362 Y27.14085
G01 X37.14355 Y27.09533
G01 X37.05481 Y27.05855
G01 X36.91650 Y26.98464
G01 X36.83662 Y26.93127
G01 X36.71539 Y26.83178
G01 X36.64747 Y26.76386
G01 X36.54798 Y26.64263
G01 X36.49461 Y26.56275
G01 X36.42070 Y26.42444
G01 X36.38394 Y26.33570
G01 X36.33840 Y26.18563
G01 X36.31968 Y26.09145
G01 X36.30429 Y25.93537
G01 X36.30429 Y25.83928
G01 X36.30894 Y25.79226
G01 X36.28702 Y25.77037
G01 X36.27825 Y25.88733
G01 X36.29552 Y26.11974
G01 X36.30330 Y26.19945
G01 X36.30180 Y26.24928
G01 X36.29027 Y26.34126
G01 X36.26162 Y26.42940
G01 X36.21686 Y26.51057
G01 X36.18239 Y26.56112
G01 X36.11618 Y26.63923
G01 X36.03515 Y26.70189
G01 X35.94290 Y26.74631
G01 X35.88529 Y26.76696
G01 X35.78572 Y26.79127
G01 X35.68328 Y26.79434
G01 X35.58245 Y26.77603
G01 X35.52372 Y26.75886
G01 X35.45189 Y26.73158
G01 X35.38521 Y26.69343
G01 X35.20076 Y26.56765
G01 X35.02387 Y26.48251
G01 X34.83624 Y26.42460
G01 X34.64209 Y26.39536
G01 X34.44574 Y26.39536
G01 X34.42499 Y26.39846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.81120 Y27.82873 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.81120 Y27.82873
G01 X32.87392 Y27.84560
G01 X32.87394 Y27.84562
G01 X32.93988 Y27.92604
G01 X32.99325 Y28.00587
G01 X33.06718 Y28.14418
G01 X33.10394 Y28.23292
G01 X33.14946 Y28.38301
G01 X33.16820 Y28.47722
G01 X33.18357 Y28.63328
G01 X33.18357 Y28.68410
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.28646 Y29.90650 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.28646 Y29.90650
G01 X32.28499 Y29.92073
G01 X32.28499 Y29.98192
G01 X32.28649 Y29.99617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.11141 Y29.95131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.11141 Y29.95131
G01 X32.19424 Y29.96779
G01 X32.28606 Y29.99563
G01 X32.33229 Y30.05314
G01 X32.39375 Y30.12355
G01 X32.47216 Y30.20206
G01 X32.51136 Y30.23622
G01 X32.51941 Y30.24333
G01 X32.56416 Y30.28346
G01 X32.60386 Y30.31651
G01 X32.64295 Y30.34671
G01 X32.68436 Y30.38423
G01 X32.73302 Y30.43289
G01 X32.77054 Y30.47432
G01 X32.83234 Y30.55428
G01 X32.87173 Y30.61085
G01 X32.87740 Y30.61986
G01 X32.94504 Y30.74948
G01 X32.96025 Y30.78047
G01 X32.97140 Y30.81311
G01 X33.01522 Y30.95260
G01 X33.01760 Y30.96299
G01 X33.02972 Y31.03089
G01 X33.04260 Y31.13109
G01 X33.04534 Y31.18692
G01 X33.04534 Y31.25573
G01 X33.04260 Y31.31158
G01 X33.02972 Y31.41178
G01 X33.02469 Y31.44485
G01 X33.01847 Y31.47996
G01 X33.00904 Y31.55707
G01 X33.00473 Y31.61973
G01 X33.00363 Y31.63934
G01 X32.99998 Y31.72250
G01 X33.00689 Y31.87122
G01 X32.99325 Y31.89675
G01 X32.93988 Y31.97663
G01 X32.84039 Y32.09786
G01 X32.77247 Y32.16578
G01 X32.65123 Y32.26527
G01 X32.57138 Y32.31864
G01 X32.43307 Y32.39255
G01 X32.34433 Y32.42931
G01 X32.19424 Y32.47485
G01 X32.11141 Y32.49131
G01 X30.88040 Y32.49133
G01 X30.79762 Y32.50779
G01 X30.64756 Y32.55331
G01 X30.55881 Y32.59006
G01 X30.42050 Y32.66400
G01 X30.34062 Y32.71737
G01 X30.32597 Y32.72941
G01 X29.84413 Y32.24757
G01 X29.84410 Y31.52522
G01 X29.84324 Y31.51938
G01 X29.83387 Y31.42441
G01 X29.82617 Y31.26756
G01 X29.82617 Y31.17506
G01 X29.83387 Y31.01826
G01 X29.84324 Y30.92332
G01 X29.84413 Y30.91725
G01 X29.88794 Y30.77292
G01 X29.92470 Y30.68418
G01 X29.99861 Y30.54587
G01 X30.05198 Y30.46601
G01 X30.15147 Y30.34478
G01 X30.21939 Y30.27686
G01 X30.34062 Y30.17737
G01 X30.42050 Y30.12400
G01 X30.55881 Y30.05006
G01 X30.64756 Y30.01331
G01 X30.79762 Y29.96779
G01 X30.88040 Y29.95133
G01 X32.11141 Y29.95131
G01 X32.19424 Y29.93485
G01 X32.28611 Y29.90699
G01 X32.28646 Y29.90650
G01 X32.28649 Y29.90650
G01 X32.33221 Y29.84958
G01 X32.39381 Y29.77907
G01 X32.47209 Y29.70066
G01 X32.51141 Y29.66640
G01 X32.51936 Y29.65936
G01 X32.56416 Y29.61918
G01 X32.60386 Y29.58613
G01 X32.64295 Y29.55593
G01 X32.68436 Y29.51842
G01 X32.73302 Y29.46975
G01 X32.77054 Y29.42832
G01 X32.83234 Y29.34836
G01 X32.87173 Y29.29180
G01 X32.87740 Y29.28278
G01 X32.94504 Y29.15316
G01 X32.96023 Y29.12223
G01 X32.97003 Y29.09381
G01 X32.97138 Y29.08956
G01 X32.97272 Y29.08535
G01 X33.01219 Y28.98641
G01 X33.03274 Y28.94430
G01 X33.03805 Y28.93323
G01 X33.06515 Y28.87526
G01 X33.15347 Y28.72639
G01 X33.17795 Y28.69241
G01 X33.18537 Y28.68144
G01 X33.23292 Y28.66442
G01 X33.33249 Y28.64008
G01 X33.43493 Y28.63701
G01 X33.53576 Y28.65533
G01 X33.59449 Y28.67250
G01 X33.66632 Y28.69977
G01 X33.73299 Y28.73795
G01 X33.88710 Y28.84301
G01 X34.06398 Y28.92817
G01 X34.25161 Y28.98608
G01 X34.44574 Y29.01532
G01 X34.64211 Y29.01532
G01 X34.66286 Y29.01222
G01 X34.63899 Y28.98834
G01 X34.59197 Y28.99294
G01 X34.49591 Y28.99294
G01 X34.33983 Y28.97757
G01 X34.24562 Y28.95883
G01 X34.09555 Y28.91331
G01 X34.00681 Y28.87656
G01 X33.86850 Y28.80262
G01 X33.78862 Y28.74925
G01 X33.66739 Y28.64976
G01 X33.59947 Y28.58184
G01 X33.56393 Y28.53854
G01 X33.49998 Y28.46063
G01 X33.44661 Y28.38075
G01 X33.37270 Y28.24245
G01 X33.33594 Y28.15370
G01 X33.29040 Y28.00361
G01 X33.27168 Y27.90940
G01 X33.25629 Y27.75335
G01 X33.25629 Y27.65731
G01 X33.26094 Y27.61027
G01 X33.21059 Y27.55998
G01 X33.18946 Y27.59823
G01 X33.14773 Y27.65863
G01 X33.13439 Y27.67796
G01 X33.06470 Y27.74534
G01 X32.98311 Y27.79767
G01 X32.92858 Y27.82548
G01 X32.87519 Y27.84598
G01 X32.87394 Y27.84562
G01 X32.81120 Y27.82873
G01 X32.72174 Y27.79863
G01 X32.64587 Y27.76899
G01 X32.58804 Y27.74301
G01 X32.57102 Y27.73511
G01 X32.50699 Y27.70443
G01 X32.48552 Y27.69368
G01 X32.36777 Y27.63221
G01 X32.33681 Y27.61700
G01 X32.30414 Y27.60587
G01 X32.16462 Y27.56203
G01 X32.15426 Y27.55967
G01 X32.08636 Y27.54755
G01 X31.98616 Y27.53465
G01 X31.93033 Y27.53191
G01 X31.89594 Y27.53110
G01 X31.09594 Y27.53110
G01 X31.06152 Y27.53191
G01 X31.00567 Y27.53465
G01 X30.90547 Y27.54755
G01 X30.83755 Y27.55967
G01 X30.82721 Y27.56203
G01 X30.68769 Y27.60587
G01 X30.65507 Y27.61700
G01 X30.62409 Y27.63221
G01 X30.49442 Y27.69993
G01 X30.48545 Y27.70549
G01 X30.42891 Y27.74494
G01 X30.41835 Y27.75309
G01 X30.37293 Y27.78540
G01 X30.34687 Y27.80244
G01 X30.29749 Y27.83201
G01 X30.22978 Y27.86907
G01 X30.18421 Y27.89223
G01 X30.12305 Y27.92119
G01 X30.07291 Y27.94321
G01 X30.02513 Y27.96272
G01 X30.02122 Y27.96234
G01 X29.92383 Y27.93071
G01 X29.84436 Y27.88482
G01 X29.84413 Y27.88446
G01 X29.83839 Y27.87481
G01 X29.80722 Y27.81362
G01 X29.72284 Y27.56097
G01 X29.71317 Y27.49978
G01 X29.70438 Y27.38886
G01 X29.70438 Y21.18445
G01 X29.70491 Y21.15694
G01 X29.70552 Y21.14140
G01 X29.72381 Y21.00642
G01 X29.72726 Y21.00162
G01 X29.76369 Y20.95151
G01 X29.83595 Y20.86680
G01 X30.37001 Y20.33274
G01 X30.39371 Y20.30784
G01 X30.40031 Y20.30055
G01 X30.44176 Y20.25849
G01 X30.47862 Y20.22405
G01 X30.49526 Y20.20807
G01 X30.52269 Y20.18087
G01 X30.54684 Y20.15786
G01 X30.61304 Y20.09735
G01 X30.67544 Y20.04457
G01 X30.69002 Y20.03312
G01 X30.70580 Y19.95389
G01 X30.71057 Y19.90490
G01 X30.70217 Y19.88460
G01 X30.68134 Y19.83756
G01 X30.65645 Y19.78493
G01 X30.62271 Y19.70370
G01 X30.56658 Y19.54686
G01 X30.54682 Y19.48189
G01 X30.50753 Y19.32504
G01 X30.49668 Y19.27066
G01 X30.47344 Y19.11384
G01 X30.46866 Y19.06558
G01 X30.46097 Y18.90876
G01 X30.46097 Y18.86251
G01 X30.46866 Y18.70566
G01 X30.47344 Y18.65740
G01 X30.49668 Y18.50058
G01 X30.50753 Y18.44623
G01 X30.54682 Y18.28938
G01 X30.56661 Y18.22433
G01 X30.62271 Y18.06751
G01 X30.65645 Y17.98633
G01 X30.71487 Y17.86279
G01 X30.74062 Y17.84166
G01 X30.82050 Y17.78829
G01 X30.95881 Y17.71438
G01 X31.04755 Y17.67760
G01 X31.19762 Y17.63208
G01 X31.29183 Y17.61334
G01 X31.44791 Y17.59797
G01 X31.54397 Y17.59797
G01 X31.59101 Y17.60262
G01 X31.61484 Y17.57877
G01 X31.59409 Y17.57564
G01 X31.39774 Y17.57564
G01 X31.20356 Y17.60490
G01 X31.19795 Y17.60663
G01 X31.12472 Y17.62319
G01 X31.04982 Y17.62837
G01 X31.04367 Y17.62832
G01 X30.99002 Y17.62792
G01 X30.88941 Y17.61669
G01 X30.79325 Y17.58504
G01 X30.71540 Y17.53993
G01 X30.71487 Y17.53907
G01 X30.70907 Y17.52959
G01 X30.67791 Y17.46843
G01 X30.59361 Y17.21600
G01 X30.58390 Y17.15481
G01 X30.57511 Y17.04377
G01 X30.57511 Y15.74174
G01 X30.57565 Y15.71420
G01 X30.57626 Y15.69866
G01 X30.59455 Y15.56368
G01 X30.59810 Y15.55878
G01 X30.63450 Y15.50867
G01 X30.70671 Y15.42406
G01 X31.99106 Y14.13968
G01 X32.01479 Y14.11479
G01 X32.03785 Y14.08931
G01 X32.05832 Y14.06175
G01 X32.06787 Y14.04852
G01 X32.09657 Y14.00448
G01 X32.11423 Y13.97501
G01 X32.12893 Y13.94398
G01 X32.15525 Y13.88037
G01 X32.16683 Y13.84804
G01 X32.17516 Y13.81471
G01 X32.18860 Y13.74725
G01 X32.19363 Y13.71327
G01 X32.19533 Y13.67895
G01 X32.19617 Y13.64453
G01 X32.19617 Y9.83857
G01 X32.19645 Y9.81835
G01 X32.19678 Y9.80692
G01 X32.21321 Y9.67408
G01 X32.21954 Y9.64505
G01 X32.23968 Y9.61891
G01 X32.28591 Y9.56461
G01 X32.31461 Y9.53405
G01 X32.33285 Y9.51391
G01 X32.40386 Y9.43220
G01 X32.43267 Y9.39296
G01 X32.47061 Y9.33550
G01 X32.50757 Y9.27312
G01 X32.54445 Y9.19715
G01 X32.57145 Y9.13388
G01 X32.58423 Y9.09926
G01 X32.61641 Y8.98361
G01 X32.63163 Y8.91625
G01 X32.63180 Y8.91516
G01 X32.64587 Y8.76009
G01 X32.64814 Y8.72562
G01 X32.64587 Y8.69118
G01 X32.63180 Y8.53609
G01 X32.63163 Y8.53499
G01 X32.61641 Y8.46763
G01 X32.58423 Y8.35199
G01 X32.57145 Y8.31739
G01 X32.55593 Y8.27891
G01 X32.54496 Y8.25387
G01 X32.54158 Y8.24609
G01 X32.53371 Y8.22748
G01 X32.49375 Y8.10340
G01 X32.48817 Y8.07896
G01 X32.47376 Y8.02451
G01 X32.47112 Y8.01567
G01 X32.45324 Y7.94630
G01 X32.46800 Y7.93131
G01 X32.52985 Y7.86984
G01 X32.59947 Y7.80827
G01 X32.64839 Y7.76997
G01 X32.74194 Y7.70784
G01 X32.75156 Y7.70248
G01 X32.78136 Y7.68496
G01 X32.80892 Y7.66416
G01 X32.96127 Y7.54325
G01 X33.02060 Y7.48948
G01 X33.06929 Y7.44079
G01 X33.12306 Y7.38148
G01 X33.24397 Y7.22913
G01 X33.26477 Y7.20155
G01 X33.28227 Y7.17180
G01 X33.35019 Y7.04960
G01 X33.37673 Y7.00180
G01 X33.41100 Y6.92941
G01 X33.43734 Y6.86578
G01 X33.45522 Y6.81585
G01 X33.46434 Y6.79037
G01 X33.51770 Y6.60338
G01 X33.52637 Y6.56997
G01 X33.53117 Y6.53574
G01 X33.55339 Y6.34252
G01 X33.55733 Y6.26253
G01 X33.55817 Y6.22812
G01 X33.55817 Y5.52812
G01 X33.55733 Y5.49373
G01 X33.55339 Y5.41374
G01 X33.53117 Y5.22052
G01 X33.52637 Y5.18628
G01 X33.51770 Y5.15288
G01 X33.46431 Y4.96586
G01 X33.43734 Y4.89048
G01 X33.41100 Y4.82685
G01 X33.37676 Y4.75446
G01 X33.30683 Y4.62863
G01 X33.28227 Y4.58446
G01 X33.26475 Y4.55469
G01 X33.24397 Y4.52713
G01 X33.12306 Y4.37480
G01 X33.06929 Y4.31544
G01 X33.02058 Y4.26675
G01 X32.96127 Y4.21298
G01 X32.80889 Y4.09208
G01 X32.78133 Y4.07127
G01 X32.75159 Y4.05377
G01 X32.58161 Y3.95931
G01 X32.50920 Y3.92505
G01 X32.44557 Y3.89871
G01 X32.37018 Y3.87173
G01 X32.18316 Y3.81834
G01 X32.14974 Y3.80968
G01 X32.11552 Y3.80488
G01 X31.92233 Y3.78265
G01 X31.84232 Y3.77872
G01 X31.77351 Y3.77872
G01 X31.69353 Y3.78265
G01 X31.50031 Y3.80488
G01 X31.46610 Y3.80968
G01 X31.43267 Y3.81834
G01 X31.24562 Y3.87176
G01 X31.17026 Y3.89871
G01 X31.10666 Y3.92505
G01 X31.03427 Y3.95929
G01 X30.86427 Y4.05377
G01 X30.83450 Y4.07127
G01 X30.80691 Y4.09208
G01 X30.65457 Y4.21301
G01 X30.59526 Y4.26675
G01 X30.54656 Y4.31544
G01 X30.49279 Y4.37478
G01 X30.41654 Y4.47084
G01 X30.36907 Y4.52482
G01 X30.34768 Y4.54674
G01 X30.31974 Y4.57709
G01 X30.30910 Y4.58928
G01 X30.10331 Y4.76068
G01 X30.09297 Y4.76708
G01 X30.07529 Y4.77846
G01 X30.07527 Y4.77846
G01 X30.07344 Y4.77966
G01 X30.04316 Y4.78044
G01 X30.04263 Y4.78011
G01 X30.04080 Y4.77899
G01 X30.02200 Y4.76751
G01 X29.81723 Y4.59998
G01 X29.79653 Y4.57684
G01 X29.77486 Y4.55362
G01 X29.74680 Y4.52482
G01 X29.69935 Y4.47089
G01 X29.62307 Y4.37480
G01 X29.56927 Y4.31544
G01 X29.52058 Y4.26675
G01 X29.46125 Y4.21298
G01 X29.30892 Y4.09208
G01 X29.28137 Y4.07127
G01 X29.25160 Y4.05377
G01 X29.08159 Y3.95929
G01 X29.00920 Y3.92507
G01 X28.94558 Y3.89871
G01 X28.87019 Y3.87173
G01 X28.68317 Y3.81834
G01 X28.64974 Y3.80968
G01 X28.61553 Y3.80488
G01 X28.42231 Y3.78265
G01 X28.34233 Y3.77872
G01 X28.27352 Y3.77872
G01 X28.19353 Y3.78265
G01 X28.00032 Y3.80488
G01 X27.96610 Y3.80968
G01 X27.93268 Y3.81834
G01 X27.74563 Y3.87173
G01 X27.67027 Y3.89871
G01 X27.60664 Y3.92505
G01 X27.53428 Y3.95929
G01 X27.36425 Y4.05377
G01 X27.33451 Y4.07127
G01 X27.30692 Y4.09208
G01 X27.15457 Y4.21301
G01 X27.09526 Y4.26675
G01 X27.04657 Y4.31544
G01 X26.99280 Y4.37478
G01 X26.91655 Y4.47084
G01 X26.86908 Y4.52482
G01 X26.84764 Y4.54681
G01 X26.81972 Y4.57709
G01 X26.80903 Y4.58938
G01 X26.60329 Y4.76071
G01 X26.59298 Y4.76708
G01 X26.57345 Y4.77963
G01 X26.54314 Y4.78044
G01 X26.54261 Y4.78011
G01 X26.54081 Y4.77902
G01 X26.52201 Y4.76754
G01 X26.31721 Y4.59998
G01 X26.29656 Y4.57686
G01 X26.27484 Y4.55362
G01 X26.24678 Y4.52482
G01 X26.19930 Y4.47084
G01 X26.12305 Y4.37478
G01 X26.06928 Y4.31544
G01 X26.02059 Y4.26675
G01 X25.96128 Y4.21301
G01 X25.80893 Y4.09208
G01 X25.78135 Y4.07127
G01 X25.75160 Y4.05377
G01 X25.58160 Y3.95929
G01 X25.50921 Y3.92507
G01 X25.44558 Y3.89871
G01 X25.37020 Y3.87173
G01 X25.18318 Y3.81834
G01 X25.14975 Y3.80968
G01 X25.11554 Y3.80488
G01 X24.92232 Y3.78265
G01 X24.84233 Y3.77872
G01 X24.77353 Y3.77872
G01 X24.69354 Y3.78265
G01 X24.50032 Y3.80488
G01 X24.46611 Y3.80968
G01 X24.43268 Y3.81834
G01 X24.24564 Y3.87173
G01 X24.17028 Y3.89871
G01 X24.10665 Y3.92505
G01 X24.03426 Y3.95929
G01 X23.86426 Y4.05377
G01 X23.83451 Y4.07127
G01 X23.80695 Y4.09208
G01 X23.65458 Y4.21298
G01 X23.59527 Y4.26675
G01 X23.54655 Y4.31547
G01 X23.49278 Y4.37478
G01 X23.41651 Y4.47089
G01 X23.36906 Y4.52482
G01 X23.34770 Y4.54676
G01 X23.31976 Y4.57706
G01 X23.30909 Y4.58931
G01 X23.10330 Y4.76068
G01 X23.09301 Y4.76706
G01 X23.07528 Y4.77844
G01 X23.07526 Y4.77846
G01 X23.07343 Y4.77966
G01 X23.04315 Y4.78044
G01 X23.04081 Y4.77899
G01 X23.02202 Y4.76754
G01 X22.81722 Y4.59998
G01 X22.79657 Y4.57686
G01 X22.77485 Y4.55362
G01 X22.74678 Y4.52482
G01 X22.69931 Y4.47084
G01 X22.62306 Y4.37478
G01 X22.56926 Y4.31544
G01 X22.52057 Y4.26675
G01 X22.46126 Y4.21298
G01 X22.30889 Y4.09208
G01 X22.28133 Y4.07127
G01 X22.25159 Y4.05377
G01 X22.08158 Y3.95931
G01 X22.00919 Y3.92505
G01 X21.94559 Y3.89871
G01 X21.87020 Y3.87173
G01 X21.68318 Y3.81834
G01 X21.64973 Y3.80965
G01 X21.61554 Y3.80488
G01 X21.42233 Y3.78265
G01 X21.34234 Y3.77872
G01 X21.27353 Y3.77872
G01 X21.19352 Y3.78265
G01 X21.00031 Y3.80488
G01 X20.96612 Y3.80965
G01 X20.93266 Y3.81834
G01 X20.74562 Y3.87176
G01 X20.67026 Y3.89871
G01 X20.60666 Y3.92505
G01 X20.53427 Y3.95929
G01 X20.36426 Y4.05377
G01 X20.33452 Y4.07127
G01 X20.30696 Y4.09208
G01 X20.15459 Y4.21298
G01 X20.09528 Y4.26675
G01 X20.04659 Y4.31544
G01 X19.99279 Y4.37478
G01 X19.91654 Y4.47084
G01 X19.86907 Y4.52482
G01 X19.84768 Y4.54674
G01 X19.81974 Y4.57709
G01 X19.80910 Y4.58928
G01 X19.60331 Y4.76068
G01 X19.59297 Y4.76708
G01 X19.57529 Y4.77844
G01 X19.57526 Y4.77846
G01 X19.57343 Y4.77966
G01 X19.54316 Y4.78044
G01 X19.54082 Y4.77899
G01 X19.52200 Y4.76751
G01 X19.31722 Y4.59998
G01 X19.29652 Y4.57684
G01 X19.27486 Y4.55362
G01 X19.24679 Y4.52482
G01 X19.19934 Y4.47089
G01 X19.12307 Y4.37478
G01 X19.06930 Y4.31547
G01 X19.02058 Y4.26675
G01 X18.96127 Y4.21298
G01 X18.80889 Y4.09208
G01 X18.78134 Y4.07127
G01 X18.75159 Y4.05377
G01 X18.58162 Y3.95931
G01 X18.50920 Y3.92505
G01 X18.44557 Y3.89871
G01 X18.37019 Y3.87173
G01 X18.18317 Y3.81834
G01 X18.14974 Y3.80968
G01 X18.11553 Y3.80488
G01 X17.92231 Y3.78265
G01 X17.84232 Y3.77872
G01 X17.77349 Y3.77872
G01 X17.69350 Y3.78265
G01 X17.50031 Y3.80488
G01 X17.46610 Y3.80968
G01 X17.43267 Y3.81834
G01 X17.24563 Y3.87173
G01 X17.17026 Y3.89871
G01 X17.10664 Y3.92505
G01 X17.03427 Y3.95929
G01 X16.86425 Y4.05377
G01 X16.83448 Y4.07127
G01 X16.80692 Y4.09208
G01 X16.65457 Y4.21301
G01 X16.59526 Y4.26675
G01 X16.54654 Y4.31544
G01 X16.49280 Y4.37478
G01 X16.41654 Y4.47082
G01 X16.36907 Y4.52482
G01 X16.34769 Y4.54674
G01 X16.31975 Y4.57709
G01 X16.30910 Y4.58928
G01 X16.10331 Y4.76068
G01 X16.09295 Y4.76708
G01 X16.07527 Y4.77846
G01 X16.07525 Y4.77846
G01 X16.07342 Y4.77966
G01 X16.04314 Y4.78044
G01 X16.04263 Y4.78011
G01 X16.02201 Y4.76754
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.07525 Y4.77846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.07525 Y4.77846
G01 X16.05792 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.57528 Y4.77844 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.57528 Y4.77844
G01 X12.55790 Y4.82030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.54081 Y4.77902 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.54081 Y4.77902
G01 X12.55790 Y4.82030
G01 X12.55790 Y4.85385
G01 X12.55793 Y5.14067
G01 X12.55793 Y6.61559
G01 X12.55790 Y6.90241
G01 X12.55790 Y6.93584
G01 X12.54058 Y6.97777
G01 X12.54058 Y6.97780
G01 X12.52288 Y6.98918
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X11.57795 Y7.89136 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X11.57795 Y7.89136
G01 X11.60853 Y7.99121
G01 X11.62677 Y8.04013
G01 X11.63103 Y8.05184
G01 X11.65196 Y8.11079
G01 X11.67670 Y8.17157
G01 X11.67972 Y8.17815
G01 X11.68569 Y8.19077
G01 X11.71648 Y8.25412
G01 X11.74345 Y8.31739
G01 X11.75623 Y8.35201
G01 X11.78841 Y8.46763
G01 X11.80363 Y8.53499
G01 X11.80380 Y8.53609
G01 X11.81787 Y8.69118
G01 X11.82014 Y8.72562
G01 X11.81787 Y8.76009
G01 X11.80380 Y8.91516
G01 X11.80363 Y8.91625
G01 X11.78841 Y8.98361
G01 X11.75623 Y9.09926
G01 X11.74345 Y9.13388
G01 X11.71645 Y9.19715
G01 X11.67957 Y9.27312
G01 X11.64261 Y9.33550
G01 X11.60467 Y9.39296
G01 X11.57584 Y9.43225
G01 X11.50485 Y9.51391
G01 X11.45709 Y9.56364
G01 X11.44762 Y9.57261
G01 X11.40439 Y9.60718
G01 X11.33527 Y9.66240
G01 X11.29809 Y9.69016
G01 X11.27828 Y9.70124
G01 X11.14018 Y9.77550
G01 X11.13065 Y9.78053
G01 X11.07602 Y9.80073
G01 X10.95044 Y9.84132
G01 X10.92616 Y9.84701
G01 X10.85836 Y9.85940
G01 X10.76294 Y9.87205
G01 X10.70233 Y9.87502
G01 X10.63352 Y9.87502
G01 X10.57292 Y9.87205
G01 X10.47747 Y9.85940
G01 X10.40965 Y9.84701
G01 X10.38539 Y9.84132
G01 X10.25981 Y9.80073
G01 X10.20518 Y9.78053
G01 X10.19568 Y9.77550
G01 X10.05758 Y9.70124
G01 X10.03777 Y9.69016
G01 X10.00058 Y9.66242
G01 X9.88826 Y9.57264
G01 X9.87876 Y9.56364
G01 X9.87648 Y9.56151
G01 X9.83101 Y9.51391
G01 X9.75997 Y9.43217
G01 X9.73119 Y9.39296
G01 X9.69327 Y9.33555
G01 X9.65626 Y9.27312
G01 X9.61940 Y9.19720
G01 X9.59238 Y9.13380
G01 X9.57960 Y9.09923
G01 X9.54742 Y8.98356
G01 X9.53223 Y8.91625
G01 X9.53205 Y8.91518
G01 X9.51798 Y8.76009
G01 X9.51572 Y8.72562
G01 X9.51798 Y8.69118
G01 X9.53205 Y8.53609
G01 X9.53223 Y8.53499
G01 X9.54745 Y8.46768
G01 X9.54821 Y8.46492
G01 X9.57960 Y8.35199
G01 X9.59238 Y8.31744
G01 X9.61938 Y8.25410
G01 X9.65626 Y8.17818
G01 X9.69324 Y8.11572
G01 X9.70160 Y8.10198
G01 X9.72966 Y8.05699
G01 X9.75908 Y8.00520
G01 X9.78775 Y7.94958
G01 X9.80432 Y7.91539
G01 X9.83901 Y7.83919
G01 X9.85763 Y7.79545
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.07506 Y6.97726 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.07506 Y6.97726
G01 X9.05794 Y6.93586
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.05794 Y6.90236 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.05794 Y6.90236
G01 X9.05791 Y6.61557
G01 X9.05794 Y6.53840
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.02283 Y6.98920 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.02283 Y6.98920
G01 X9.04056 Y6.97777
G01 X9.04242 Y6.97660
G01 X9.07269 Y6.97582
G01 X9.07323 Y6.97615
G01 X9.07506 Y6.97726
G01 X9.07508 Y6.97729
G01 X9.09385 Y6.98874
G01 X9.29863 Y7.15628
G01 X9.31933 Y7.17942
G01 X9.34099 Y7.20264
G01 X9.36906 Y7.23144
G01 X9.41653 Y7.28539
G01 X9.49278 Y7.38148
G01 X9.54656 Y7.44079
G01 X9.59525 Y7.48948
G01 X9.64600 Y7.53548
G01 X9.66012 Y7.54864
G01 X9.66782 Y7.55600
G01 X9.75715 Y7.65908
G01 X9.78234 Y7.69410
G01 X9.79438 Y7.71038
G01 X9.83289 Y7.76123
G01 X9.85763 Y7.79545
G01 X9.99489 Y7.78191
G01 X10.07246 Y7.77800
G01 X10.13510 Y7.77800
G01 X10.19525 Y7.77510
G01 X10.24607 Y7.77010
G01 X10.29540 Y7.76764
G01 X10.45925 Y7.76764
G01 X10.48407 Y7.76847
G01 X10.49494 Y7.76918
G01 X10.51818 Y7.76997
G01 X10.65260 Y7.77000
G01 X10.68310 Y7.77147
G01 X10.79276 Y7.78229
G01 X10.82326 Y7.78376
G01 X10.83947 Y7.78376
G01 X10.87119 Y7.78534
G01 X11.03032 Y7.80101
G01 X11.07007 Y7.80693
G01 X11.10195 Y7.81328
G01 X11.14744 Y7.81998
G01 X11.23627 Y7.82872
G01 X11.29530 Y7.83756
G01 X11.44881 Y7.86809
G01 X11.46992 Y7.87200
G01 X11.53715 Y7.88359
G01 X11.56418 Y7.88862
G01 X11.57795 Y7.89136
G01 X11.69230 Y7.76578
G01 X11.73924 Y7.72379
G01 X11.75544 Y7.70972
G01 X11.80916 Y7.66438
G01 X11.82552 Y7.65100
G01 X11.96128 Y7.54325
G01 X12.02062 Y7.48945
G01 X12.06926 Y7.44081
G01 X12.12306 Y7.38148
G01 X12.19931 Y7.28542
G01 X12.24678 Y7.23147
G01 X12.26817 Y7.20952
G01 X12.29611 Y7.17917
G01 X12.30675 Y7.16698
G01 X12.51254 Y6.99558
G01 X12.52288 Y6.98918
G01 X12.54058 Y6.97777
G01 X12.54241 Y6.97660
G01 X12.57269 Y6.97582
G01 X12.57322 Y6.97615
G01 X12.57510 Y6.97729
G01 X12.59384 Y6.98874
G01 X12.79854 Y7.15621
G01 X12.81932 Y7.17942
G01 X12.84094 Y7.20259
G01 X12.86908 Y7.23147
G01 X12.91653 Y7.28537
G01 X12.99280 Y7.38145
G01 X13.04660 Y7.44081
G01 X13.09524 Y7.48945
G01 X13.17042 Y7.55760
G01 X13.17116 Y7.55829
G01 X13.18610 Y7.57165
G01 X13.28922 Y7.68569
G01 X13.29344 Y7.69149
G01 X13.33347 Y7.74173
G01 X13.33954 Y7.74879
G01 X13.39044 Y7.81369
G01 X13.56301 Y7.79667
G01 X13.62707 Y7.79301
G01 X13.63644 Y7.79288
G01 X13.69074 Y7.78991
G01 X13.80657 Y7.77848
G01 X13.85396 Y7.77612
G01 X13.98173 Y7.77612
G01 X14.01731 Y7.77442
G01 X14.01774 Y7.77439
G01 X14.05127 Y7.77274
G01 X14.20888 Y7.77274
G01 X14.23885 Y7.77421
G01 X14.29300 Y7.77955
G01 X14.32298 Y7.78102
G01 X14.39575 Y7.78102
G01 X14.42803 Y7.78262
G01 X14.58716 Y7.79829
G01 X14.60062 Y7.79984
G01 X14.62795 Y7.80345
G01 X14.64294 Y7.80518
G01 X14.79676 Y7.82034
G01 X14.85792 Y7.82948
G01 X14.94220 Y7.84625
G01 X15.02361 Y7.85819
G01 X15.03623 Y7.85943
G01 X15.11721 Y7.87081
G01 X15.23786 Y7.73629
G01 X15.25937 Y7.71706
G01 X15.28416 Y7.69385
G01 X15.31139 Y7.66713
G01 X15.36689 Y7.61813
G01 X15.40588 Y7.58719
G01 X15.46128 Y7.54323
G01 X15.52061 Y7.48945
G01 X15.56925 Y7.44081
G01 X15.62302 Y7.38148
G01 X15.69930 Y7.28542
G01 X15.74675 Y7.23147
G01 X15.76821 Y7.20944
G01 X15.79612 Y7.17917
G01 X15.80679 Y7.16687
G01 X16.01256 Y6.99555
G01 X16.02287 Y6.98918
G01 X16.04057 Y6.97780
G01 X16.05792 Y6.93584
G01 X16.05792 Y4.82032
G01 X16.04080 Y4.77902
G01 X16.02201 Y4.76754
G01 X15.81728 Y4.60005
G01 X15.79653 Y4.57686
G01 X15.77492 Y4.55367
G01 X15.74675 Y4.52482
G01 X15.69930 Y4.47084
G01 X15.62302 Y4.37478
G01 X15.56928 Y4.31544
G01 X15.52059 Y4.26675
G01 X15.46128 Y4.21301
G01 X15.30893 Y4.09210
G01 X15.28132 Y4.07127
G01 X15.25160 Y4.05377
G01 X15.08157 Y3.95929
G01 X15.00921 Y3.92507
G01 X14.94558 Y3.89871
G01 X14.87019 Y3.87173
G01 X14.68317 Y3.81834
G01 X14.64975 Y3.80968
G01 X14.61553 Y3.80488
G01 X14.42231 Y3.78265
G01 X14.34233 Y3.77872
G01 X14.27352 Y3.77872
G01 X14.19354 Y3.78265
G01 X14.00032 Y3.80488
G01 X13.96611 Y3.80968
G01 X13.93268 Y3.81834
G01 X13.74563 Y3.87173
G01 X13.67027 Y3.89871
G01 X13.60664 Y3.92505
G01 X13.53428 Y3.95929
G01 X13.36425 Y4.05377
G01 X13.33448 Y4.07127
G01 X13.30692 Y4.09208
G01 X13.15460 Y4.21298
G01 X13.09527 Y4.26675
G01 X13.04657 Y4.31544
G01 X12.99278 Y4.37480
G01 X12.91650 Y4.47089
G01 X12.86905 Y4.52482
G01 X12.84769 Y4.54676
G01 X12.81975 Y4.57706
G01 X12.80908 Y4.58931
G01 X12.60329 Y4.76068
G01 X12.59301 Y4.76706
G01 X12.57530 Y4.77844
G01 X12.57528 Y4.77844
G01 X12.57342 Y4.77966
G01 X12.54315 Y4.78044
G01 X12.54261 Y4.78011
G01 X12.54081 Y4.77902
G01 X12.52201 Y4.76754
G01 X12.31721 Y4.59998
G01 X12.29656 Y4.57686
G01 X12.27485 Y4.55362
G01 X12.24678 Y4.52482
G01 X12.19931 Y4.47084
G01 X12.12306 Y4.37478
G01 X12.06928 Y4.31544
G01 X12.02059 Y4.26675
G01 X11.96128 Y4.21301
G01 X11.80893 Y4.09208
G01 X11.78135 Y4.07127
G01 X11.75158 Y4.05377
G01 X11.58158 Y3.95929
G01 X11.50919 Y3.92505
G01 X11.44559 Y3.89871
G01 X11.37020 Y3.87173
G01 X11.18318 Y3.81834
G01 X11.14975 Y3.80968
G01 X11.11554 Y3.80488
G01 X10.92232 Y3.78265
G01 X10.84234 Y3.77872
G01 X10.77353 Y3.77872
G01 X10.69352 Y3.78265
G01 X10.50033 Y3.80488
G01 X10.46611 Y3.80968
G01 X10.43269 Y3.81834
G01 X10.24561 Y3.87176
G01 X10.17996 Y3.89523
G01 X10.17028 Y3.89871
G01 X10.10665 Y3.92505
G01 X10.03426 Y3.95929
G01 X9.86426 Y4.05377
G01 X9.83452 Y4.07127
G01 X9.80696 Y4.09208
G01 X9.65458 Y4.21298
G01 X9.59527 Y4.26675
G01 X9.54656 Y4.31544
G01 X9.49278 Y4.37478
G01 X9.41653 Y4.47087
G01 X9.36906 Y4.52482
G01 X9.34770 Y4.54676
G01 X9.31976 Y4.57706
G01 X9.30909 Y4.58931
G01 X9.10330 Y4.76068
G01 X9.09301 Y4.76706
G01 X9.07528 Y4.77844
G01 X9.07526 Y4.77846
G01 X9.05794 Y4.82032
G01 X9.05794 Y6.93586
G01 X9.04056 Y6.97777
G01 X9.04056 Y6.97780
G01 X9.02283 Y6.98920
G01 X9.01255 Y6.99558
G01 X8.80676 Y7.16695
G01 X8.79609 Y7.17919
G01 X8.76815 Y7.20950
G01 X8.74679 Y7.23144
G01 X8.69931 Y7.28539
G01 X8.62306 Y7.38148
G01 X8.56929 Y7.44079
G01 X8.52060 Y7.48948
G01 X8.46126 Y7.54325
G01 X8.41461 Y7.58028
G01 X8.30892 Y7.66416
G01 X8.28369 Y7.68328
G01 X8.25311 Y7.70538
G01 X8.19357 Y7.75336
G01 X8.14664 Y7.79535
G01 X8.04689 Y7.90175
G01 X8.03874 Y7.91198
G01 X8.07193 Y8.02324
G01 X8.07648 Y8.03543
G01 X8.09281 Y8.08389
G01 X8.10023 Y8.10850
G01 X8.13625 Y8.20365
G01 X8.13927 Y8.21020
G01 X8.14503 Y8.22235
G01 X8.16048 Y8.25412
G01 X8.18745 Y8.31739
G01 X8.20023 Y8.35201
G01 X8.23241 Y8.46763
G01 X8.24763 Y8.53499
G01 X8.24780 Y8.53609
G01 X8.26187 Y8.69118
G01 X8.26414 Y8.72562
G01 X8.26187 Y8.76009
G01 X8.24780 Y8.91516
G01 X8.24763 Y8.91625
G01 X8.23241 Y8.98361
G01 X8.20023 Y9.09926
G01 X8.18745 Y9.13388
G01 X8.16045 Y9.19715
G01 X8.12357 Y9.27312
G01 X8.08661 Y9.33550
G01 X8.04867 Y9.39296
G01 X8.01984 Y9.43225
G01 X7.94885 Y9.51391
G01 X7.90109 Y9.56364
G01 X7.89162 Y9.57261
G01 X7.84839 Y9.60718
G01 X7.77927 Y9.66240
G01 X7.74209 Y9.69016
G01 X7.72228 Y9.70124
G01 X7.58418 Y9.77550
G01 X7.57465 Y9.78053
G01 X7.52002 Y9.80073
G01 X7.39444 Y9.84132
G01 X7.37016 Y9.84701
G01 X7.30236 Y9.85940
G01 X7.20694 Y9.87205
G01 X7.14633 Y9.87502
G01 X7.07752 Y9.87502
G01 X7.01692 Y9.87205
G01 X6.92147 Y9.85940
G01 X6.85365 Y9.84701
G01 X6.82939 Y9.84132
G01 X6.70381 Y9.80073
G01 X6.64918 Y9.78053
G01 X6.63968 Y9.77550
G01 X6.50158 Y9.70124
G01 X6.48177 Y9.69016
G01 X6.44458 Y9.66242
G01 X6.33226 Y9.57264
G01 X6.32276 Y9.56364
G01 X6.32048 Y9.56151
G01 X6.27501 Y9.51391
G01 X6.20397 Y9.43217
G01 X6.17519 Y9.39296
G01 X6.13727 Y9.33555
G01 X6.10026 Y9.27312
G01 X6.06340 Y9.19720
G01 X6.03638 Y9.13380
G01 X6.02360 Y9.09923
G01 X5.99142 Y8.98356
G01 X5.97623 Y8.91625
G01 X5.97605 Y8.91518
G01 X5.96198 Y8.76009
G01 X5.95972 Y8.72562
G01 X5.96198 Y8.69118
G01 X5.97605 Y8.53609
G01 X5.97623 Y8.53499
G01 X5.99145 Y8.46768
G01 X5.99221 Y8.46492
G01 X6.02360 Y8.35199
G01 X6.03638 Y8.31744
G01 X6.06338 Y8.25410
G01 X6.10026 Y8.17815
G01 X6.13724 Y8.11572
G01 X6.16803 Y8.06824
G01 X6.17514 Y8.05821
G01 X6.22736 Y7.97205
G01 X6.25411 Y7.92016
G01 X6.25604 Y7.91643
G01 X6.29119 Y7.84914
G01 X6.32485 Y7.77721
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.03874 Y7.91198 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.03874 Y7.91198
G01 X7.99289 Y7.90116
G01 X7.95593 Y7.89154
G01 X7.90709 Y7.88033
G01 X7.73267 Y7.84564
G01 X7.67577 Y7.83713
G01 X7.65189 Y7.83477
G01 X7.60333 Y7.82760
G01 X7.51268 Y7.80957
G01 X7.47351 Y7.80373
G01 X7.32375 Y7.78900
G01 X7.31440 Y7.78793
G01 X7.29246 Y7.78514
G01 X7.28344 Y7.78412
G01 X7.12738 Y7.76875
G01 X7.09632 Y7.76723
G01 X7.01844 Y7.76723
G01 X6.98492 Y7.76558
G01 X6.93813 Y7.76095
G01 X6.90069 Y7.75913
G01 X6.73681 Y7.75913
G01 X6.69967 Y7.76050
G01 X6.68550 Y7.76151
G01 X6.64313 Y7.76301
G01 X6.50846 Y7.76304
G01 X6.42678 Y7.76715
G01 X6.32485 Y7.77721
G01 X6.32457 Y7.77678
G01 X6.27529 Y7.70264
G01 X6.25787 Y7.67744
G01 X6.22091 Y7.62606
G01 X6.13216 Y7.52367
G01 X6.12444 Y7.51628
G01 X6.11047 Y7.50327
G01 X6.09523 Y7.48945
G01 X6.04659 Y7.44081
G01 X5.99279 Y7.38145
G01 X5.87189 Y7.22915
G01 X5.85108 Y7.20157
G01 X5.83356 Y7.17178
G01 X5.73910 Y7.00177
G01 X5.70486 Y6.92938
G01 X5.67852 Y6.86581
G01 X5.65154 Y6.79040
G01 X5.63435 Y6.73022
G01 X5.59813 Y6.60340
G01 X5.58946 Y6.56995
G01 X5.58466 Y6.53574
G01 X5.56246 Y6.34254
G01 X5.55853 Y6.26253
G01 X5.55769 Y6.22812
G01 X5.55769 Y5.52812
G01 X5.55853 Y5.49373
G01 X5.56246 Y5.41372
G01 X5.58466 Y5.22052
G01 X5.58946 Y5.18631
G01 X5.59813 Y5.15286
G01 X5.61476 Y5.09462
G01 X5.65152 Y4.96586
G01 X5.67852 Y4.89045
G01 X5.70486 Y4.82687
G01 X5.73910 Y4.75446
G01 X5.83356 Y4.58448
G01 X5.83772 Y4.57709
G01 X5.85106 Y4.55474
G01 X5.87189 Y4.52713
G01 X5.99279 Y4.37478
G01 X6.04659 Y4.31544
G01 X6.09525 Y4.26675
G01 X6.15459 Y4.21298
G01 X6.30691 Y4.09210
G01 X6.33450 Y4.07127
G01 X6.36427 Y4.05377
G01 X6.53427 Y3.95929
G01 X6.60666 Y3.92505
G01 X6.67026 Y3.89871
G01 X6.74562 Y3.87176
G01 X6.93267 Y3.81834
G01 X6.96609 Y3.80968
G01 X7.00031 Y3.80488
G01 X7.19353 Y3.78265
G01 X7.27351 Y3.77872
G01 X7.34232 Y3.77872
G01 X7.42233 Y3.78265
G01 X7.61552 Y3.80488
G01 X7.64973 Y3.80968
G01 X7.68316 Y3.81834
G01 X7.87018 Y3.87173
G01 X7.94557 Y3.89871
G01 X8.00920 Y3.92505
G01 X8.08161 Y3.95931
G01 X8.25159 Y4.05377
G01 X8.28133 Y4.07127
G01 X8.30889 Y4.09208
G01 X8.46126 Y4.21298
G01 X8.52057 Y4.26675
G01 X8.56929 Y4.31544
G01 X8.62306 Y4.37478
G01 X8.69931 Y4.47087
G01 X8.74679 Y4.52482
G01 X8.77485 Y4.55362
G01 X8.79652 Y4.57684
G01 X8.81722 Y4.59998
G01 X9.02200 Y4.76751
G01 X9.04082 Y4.77899
G01 X9.04315 Y4.78044
G01 X9.07343 Y4.77966
G01 X9.07526 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.04082 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.04082 Y4.77899
G01 X9.05794 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.55790 Y6.93584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.55790 Y6.93584
G01 X12.57510 Y6.97729
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.39044 Y7.81369 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.39044 Y7.81369
G01 X13.38521 Y7.82725
G01 X13.35287 Y7.90929
G01 X13.31985 Y7.98226
G01 X13.29118 Y8.03789
G01 X13.28244 Y8.05435
G01 X13.24891 Y8.11554
G01 X13.23725 Y8.13599
G01 X13.21462 Y8.17419
G01 X13.21226 Y8.17815
G01 X13.17538 Y8.25410
G01 X13.14838 Y8.31744
G01 X13.13560 Y8.35199
G01 X13.10421 Y8.46492
G01 X13.10345 Y8.46768
G01 X13.08823 Y8.53499
G01 X13.08805 Y8.53609
G01 X13.07398 Y8.69118
G01 X13.07172 Y8.72562
G01 X13.07398 Y8.76009
G01 X13.08805 Y8.91518
G01 X13.08823 Y8.91625
G01 X13.10342 Y8.98356
G01 X13.13560 Y9.09923
G01 X13.14838 Y9.13380
G01 X13.17540 Y9.19720
G01 X13.21226 Y9.27312
G01 X13.24927 Y9.33555
G01 X13.28719 Y9.39296
G01 X13.31597 Y9.43217
G01 X13.38701 Y9.51391
G01 X13.43248 Y9.56151
G01 X13.43476 Y9.56364
G01 X13.44426 Y9.57264
G01 X13.55658 Y9.66242
G01 X13.59377 Y9.69016
G01 X13.61358 Y9.70124
G01 X13.75168 Y9.77550
G01 X13.76118 Y9.78053
G01 X13.81581 Y9.80073
G01 X13.94139 Y9.84132
G01 X13.96565 Y9.84701
G01 X14.03347 Y9.85940
G01 X14.12892 Y9.87205
G01 X14.18952 Y9.87502
G01 X14.25833 Y9.87502
G01 X14.31894 Y9.87205
G01 X14.41436 Y9.85940
G01 X14.48216 Y9.84701
G01 X14.50644 Y9.84132
G01 X14.63202 Y9.80073
G01 X14.68665 Y9.78053
G01 X14.69618 Y9.77550
G01 X14.83428 Y9.70124
G01 X14.85409 Y9.69016
G01 X14.89127 Y9.66240
G01 X14.96039 Y9.60718
G01 X15.00362 Y9.57261
G01 X15.01309 Y9.56364
G01 X15.06085 Y9.51391
G01 X15.13184 Y9.43225
G01 X15.16067 Y9.39296
G01 X15.19861 Y9.33550
G01 X15.23557 Y9.27314
G01 X15.27245 Y9.19715
G01 X15.29943 Y9.13385
G01 X15.31223 Y9.09926
G01 X15.34439 Y8.98361
G01 X15.35963 Y8.91625
G01 X15.35980 Y8.91516
G01 X15.37385 Y8.76009
G01 X15.37614 Y8.72562
G01 X15.37385 Y8.69118
G01 X15.35980 Y8.53609
G01 X15.35963 Y8.53499
G01 X15.34439 Y8.46763
G01 X15.31223 Y8.35199
G01 X15.29943 Y8.31739
G01 X15.27248 Y8.25415
G01 X15.22633 Y8.15913
G01 X15.22104 Y8.14797
G01 X15.21800 Y8.14140
G01 X15.20524 Y8.11224
G01 X15.17738 Y8.04452
G01 X15.16770 Y8.01983
G01 X15.14512 Y7.95923
G01 X15.12181 Y7.88729
G01 X15.11721 Y7.87081
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.05792 Y6.93584 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.05792 Y6.93584
G01 X16.07507 Y6.97726
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.04057 Y6.97780 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.04057 Y6.97780
G01 X16.04240 Y6.97663
G01 X16.07268 Y6.97582
G01 X16.07324 Y6.97615
G01 X16.07507 Y6.97726
G01 X16.07509 Y6.97729
G01 X16.09384 Y6.98872
G01 X16.29864 Y7.15628
G01 X16.31929 Y7.17940
G01 X16.34101 Y7.20264
G01 X16.36907 Y7.23147
G01 X16.41654 Y7.28542
G01 X16.49277 Y7.38145
G01 X16.54659 Y7.44081
G01 X16.59521 Y7.48945
G01 X16.65467 Y7.54333
G01 X16.67334 Y7.55814
G01 X16.70517 Y7.58498
G01 X16.72272 Y7.60071
G01 X16.79635 Y7.67701
G01 X16.83191 Y7.71965
G01 X16.84619 Y7.73632
G01 X16.87479 Y7.76883
G01 X16.92541 Y7.83185
G01 X16.94342 Y7.82992
G01 X17.11644 Y7.81287
G01 X17.13102 Y7.81130
G01 X17.18622 Y7.80482
G01 X17.19810 Y7.80353
G01 X17.36706 Y7.78689
G01 X17.41253 Y7.78463
G01 X17.47915 Y7.78463
G01 X17.51692 Y7.78280
G01 X17.57415 Y7.77716
G01 X17.60755 Y7.77551
G01 X17.76516 Y7.77551
G01 X17.79325 Y7.77683
G01 X17.79455 Y7.77693
G01 X17.82271 Y7.77825
G01 X17.95200 Y7.77825
G01 X17.98484 Y7.77988
G01 X18.09975 Y7.79121
G01 X18.13925 Y7.79311
G01 X18.14474 Y7.79311
G01 X18.18832 Y7.79530
G01 X18.35726 Y7.81193
G01 X18.42055 Y7.82141
G01 X18.43557 Y7.82438
G01 X18.51149 Y7.83553
G01 X18.60435 Y7.84467
G01 X18.65474 Y7.85092
G01 X18.76338 Y7.72458
G01 X18.78055 Y7.70822
G01 X18.81573 Y7.67244
G01 X18.82378 Y7.66367
G01 X18.90587 Y7.58722
G01 X18.96129 Y7.54325
G01 X19.02060 Y7.48948
G01 X19.06930 Y7.44079
G01 X19.12307 Y7.38145
G01 X19.19934 Y7.28537
G01 X19.24679 Y7.23144
G01 X19.26815 Y7.20950
G01 X19.29609 Y7.17919
G01 X19.30676 Y7.16695
G01 X19.51255 Y6.99558
G01 X19.52284 Y6.98920
G01 X19.54057 Y6.97780
G01 X19.54057 Y6.97777
G01 X19.55794 Y6.93586
G01 X19.55792 Y6.90236
G01 X19.55792 Y4.85390
G01 X19.55794 Y4.82032
G01 X19.57526 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.54082 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.54082 Y4.77899
G01 X19.55794 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.92541 Y7.83185 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.92541 Y7.83185
G01 X16.90102 Y7.90284
G01 X16.85523 Y8.01054
G01 X16.83432 Y8.05100
G01 X16.82673 Y8.06621
G01 X16.80316 Y8.11460
G01 X16.77585 Y8.16532
G01 X16.76828 Y8.17812
G01 X16.73135 Y8.25410
G01 X16.70438 Y8.31744
G01 X16.69160 Y8.35199
G01 X16.66021 Y8.46492
G01 X16.65945 Y8.46768
G01 X16.64423 Y8.53499
G01 X16.64403 Y8.53609
G01 X16.62998 Y8.69118
G01 X16.62772 Y8.72562
G01 X16.62998 Y8.76009
G01 X16.64403 Y8.91518
G01 X16.64423 Y8.91625
G01 X16.65942 Y8.98356
G01 X16.69160 Y9.09923
G01 X16.70438 Y9.13380
G01 X16.73140 Y9.19720
G01 X16.76823 Y9.27312
G01 X16.80527 Y9.33555
G01 X16.84319 Y9.39296
G01 X16.87197 Y9.43217
G01 X16.94301 Y9.51391
G01 X16.98845 Y9.56151
G01 X16.99076 Y9.56364
G01 X17.00029 Y9.57266
G01 X17.11256 Y9.66242
G01 X17.14974 Y9.69016
G01 X17.16958 Y9.70124
G01 X17.30768 Y9.77550
G01 X17.31718 Y9.78053
G01 X17.37181 Y9.80073
G01 X17.49739 Y9.84132
G01 X17.52162 Y9.84701
G01 X17.58947 Y9.85940
G01 X17.68489 Y9.87205
G01 X17.74552 Y9.87502
G01 X17.81433 Y9.87502
G01 X17.87494 Y9.87205
G01 X17.97036 Y9.85940
G01 X18.03816 Y9.84701
G01 X18.06244 Y9.84132
G01 X18.18802 Y9.80073
G01 X18.24265 Y9.78053
G01 X18.25218 Y9.77550
G01 X18.39028 Y9.70124
G01 X18.41009 Y9.69016
G01 X18.44727 Y9.66240
G01 X18.51639 Y9.60718
G01 X18.55962 Y9.57261
G01 X18.56909 Y9.56364
G01 X18.61685 Y9.51391
G01 X18.68784 Y9.43225
G01 X18.71667 Y9.39296
G01 X18.75461 Y9.33550
G01 X18.79157 Y9.27312
G01 X18.82845 Y9.19715
G01 X18.85545 Y9.13388
G01 X18.86823 Y9.09926
G01 X18.90041 Y8.98361
G01 X18.91563 Y8.91625
G01 X18.91580 Y8.91516
G01 X18.92987 Y8.76009
G01 X18.93214 Y8.72562
G01 X18.92987 Y8.69118
G01 X18.91580 Y8.53609
G01 X18.91563 Y8.53499
G01 X18.90041 Y8.46763
G01 X18.86823 Y8.35199
G01 X18.85545 Y8.31739
G01 X18.82848 Y8.25412
G01 X18.78941 Y8.17368
G01 X18.78098 Y8.15780
G01 X18.77021 Y8.13685
G01 X18.75878 Y8.11356
G01 X18.72835 Y8.04866
G01 X18.70359 Y7.98966
G01 X18.68101 Y7.92903
G01 X18.66897 Y7.89453
G01 X18.65474 Y7.85092
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.55794 Y6.93586 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.55794 Y6.93586
G01 X19.57506 Y6.97726
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.52284 Y6.98920 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.52284 Y6.98920
G01 X19.54057 Y6.97777
G01 X19.54242 Y6.97660
G01 X19.57270 Y6.97582
G01 X19.57323 Y6.97615
G01 X19.57506 Y6.97726
G01 X19.57509 Y6.97729
G01 X19.59383 Y6.98872
G01 X19.79863 Y7.15628
G01 X19.81928 Y7.17940
G01 X19.84100 Y7.20264
G01 X19.86907 Y7.23147
G01 X19.91651 Y7.28537
G01 X19.99276 Y7.38145
G01 X20.04659 Y7.44081
G01 X20.09525 Y7.48948
G01 X20.15461 Y7.54328
G01 X20.21009 Y7.58729
G01 X20.24212 Y7.61435
G01 X20.25967 Y7.63004
G01 X20.30155 Y7.67073
G01 X20.35253 Y7.72448
G01 X20.37295 Y7.74681
G01 X20.41611 Y7.79583
G01 X20.46091 Y7.85095
G01 X20.44778 Y7.89527
G01 X20.39078 Y8.03835
G01 X20.38608 Y8.04749
G01 X20.36391 Y8.09446
G01 X20.35601 Y8.11292
G01 X20.32649 Y8.17358
G01 X20.28738 Y8.25410
G01 X20.26038 Y8.31744
G01 X20.24760 Y8.35199
G01 X20.21621 Y8.46492
G01 X20.21545 Y8.46768
G01 X20.20023 Y8.53499
G01 X20.20005 Y8.53609
G01 X20.18598 Y8.69118
G01 X20.18372 Y8.72562
G01 X20.18598 Y8.76009
G01 X20.20005 Y8.91518
G01 X20.20023 Y8.91625
G01 X20.21542 Y8.98356
G01 X20.24760 Y9.09923
G01 X20.26038 Y9.13380
G01 X20.28740 Y9.19720
G01 X20.32426 Y9.27312
G01 X20.36127 Y9.33555
G01 X20.39919 Y9.39296
G01 X20.42797 Y9.43217
G01 X20.49901 Y9.51391
G01 X20.54448 Y9.56151
G01 X20.54676 Y9.56364
G01 X20.55626 Y9.57264
G01 X20.66858 Y9.66242
G01 X20.70577 Y9.69016
G01 X20.72558 Y9.70124
G01 X20.86368 Y9.77550
G01 X20.87318 Y9.78053
G01 X20.92781 Y9.80073
G01 X21.05339 Y9.84132
G01 X21.07765 Y9.84701
G01 X21.14547 Y9.85940
G01 X21.24092 Y9.87205
G01 X21.30152 Y9.87502
G01 X21.37033 Y9.87502
G01 X21.43094 Y9.87205
G01 X21.52636 Y9.85940
G01 X21.59416 Y9.84701
G01 X21.61844 Y9.84132
G01 X21.74402 Y9.80073
G01 X21.79865 Y9.78053
G01 X21.80818 Y9.77550
G01 X21.94628 Y9.70124
G01 X21.96609 Y9.69016
G01 X22.00327 Y9.66240
G01 X22.07239 Y9.60718
G01 X22.11562 Y9.57261
G01 X22.12509 Y9.56364
G01 X22.17285 Y9.51391
G01 X22.24384 Y9.43225
G01 X22.27267 Y9.39296
G01 X22.31061 Y9.33550
G01 X22.34757 Y9.27312
G01 X22.38445 Y9.19715
G01 X22.41145 Y9.13388
G01 X22.42423 Y9.09926
G01 X22.45641 Y8.98361
G01 X22.47163 Y8.91625
G01 X22.47180 Y8.91516
G01 X22.48588 Y8.76009
G01 X22.48814 Y8.72562
G01 X22.48588 Y8.69118
G01 X22.47180 Y8.53609
G01 X22.47163 Y8.53499
G01 X22.45641 Y8.46763
G01 X22.42423 Y8.35199
G01 X22.41145 Y8.31739
G01 X22.38448 Y8.25412
G01 X22.34760 Y8.17818
G01 X22.34005 Y8.16545
G01 X22.31963 Y8.12852
G01 X22.31255 Y8.11473
G01 X22.30884 Y8.10759
G01 X22.27968 Y8.05250
G01 X22.23881 Y7.96108
G01 X22.21658 Y7.90142
G01 X22.21623 Y7.90045
G01 X22.19057 Y7.83187
G01 X22.26855 Y7.73428
G01 X22.31869 Y7.68006
G01 X22.36048 Y7.63456
G01 X22.44259 Y7.55808
G01 X22.46124 Y7.54328
G01 X22.52060 Y7.48948
G01 X22.56926 Y7.44081
G01 X22.62306 Y7.38148
G01 X22.69931 Y7.28542
G01 X22.74678 Y7.23147
G01 X22.76817 Y7.20952
G01 X22.79611 Y7.17917
G01 X22.80675 Y7.16698
G01 X23.01254 Y6.99558
G01 X23.02288 Y6.98918
G01 X23.04059 Y6.97780
G01 X23.04059 Y6.97777
G01 X23.05793 Y6.93584
G01 X23.05793 Y4.82030
G01 X23.07526 Y4.77846
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.04081 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.04081 Y4.77899
G01 X23.05793 Y4.82030
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.46091 Y7.85095 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.46091 Y7.85095
G01 X20.51151 Y7.84467
G01 X20.60437 Y7.83553
G01 X20.68029 Y7.82438
G01 X20.69530 Y7.82141
G01 X20.75862 Y7.81193
G01 X20.92756 Y7.79530
G01 X20.97112 Y7.79311
G01 X20.97656 Y7.79311
G01 X21.01608 Y7.79121
G01 X21.13096 Y7.77988
G01 X21.16383 Y7.77825
G01 X21.29314 Y7.77825
G01 X21.32128 Y7.77693
G01 X21.32258 Y7.77683
G01 X21.35072 Y7.77551
G01 X21.50828 Y7.77551
G01 X21.54168 Y7.77716
G01 X21.59893 Y7.78280
G01 X21.63670 Y7.78463
G01 X21.70330 Y7.78463
G01 X21.74879 Y7.78689
G01 X21.91773 Y7.80353
G01 X21.92961 Y7.80482
G01 X21.98486 Y7.81130
G01 X21.99939 Y7.81287
G01 X22.17246 Y7.82992
G01 X22.19057 Y7.83187
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.07505 Y6.97726 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.07505 Y6.97726
G01 X23.05793 Y6.93584
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.02288 Y6.98918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.02288 Y6.98918
G01 X23.04059 Y6.97777
G01 X23.04241 Y6.97660
G01 X23.07269 Y6.97582
G01 X23.07322 Y6.97615
G01 X23.07505 Y6.97726
G01 X23.07508 Y6.97729
G01 X23.09385 Y6.98874
G01 X23.29862 Y7.15628
G01 X23.31933 Y7.17942
G01 X23.34099 Y7.20264
G01 X23.36906 Y7.23144
G01 X23.41653 Y7.28537
G01 X23.49278 Y7.38145
G01 X23.54655 Y7.44079
G01 X23.59525 Y7.48948
G01 X23.65458 Y7.54325
G01 X23.74897 Y7.61816
G01 X23.75963 Y7.62679
G01 X23.76522 Y7.63141
G01 X23.80485 Y7.66672
G01 X23.85676 Y7.71658
G01 X23.85727 Y7.71706
G01 X23.90307 Y7.76116
G01 X23.99893 Y7.87076
G01 X23.99438 Y7.88755
G01 X23.95821 Y7.99418
G01 X23.93764 Y8.04383
G01 X23.93380 Y8.05323
G01 X23.91033 Y8.11201
G01 X23.88948 Y8.15918
G01 X23.84338 Y8.25410
G01 X23.81638 Y8.31744
G01 X23.80360 Y8.35201
G01 X23.77142 Y8.46768
G01 X23.75623 Y8.53499
G01 X23.75605 Y8.53606
G01 X23.74198 Y8.69118
G01 X23.73972 Y8.72562
G01 X23.74198 Y8.76009
G01 X23.75605 Y8.91518
G01 X23.75623 Y8.91625
G01 X23.77142 Y8.98356
G01 X23.80360 Y9.09923
G01 X23.81638 Y9.13380
G01 X23.84340 Y9.19720
G01 X23.88026 Y9.27312
G01 X23.91727 Y9.33555
G01 X23.95519 Y9.39296
G01 X23.98397 Y9.43217
G01 X24.05501 Y9.51391
G01 X24.10048 Y9.56151
G01 X24.10276 Y9.56364
G01 X24.11226 Y9.57264
G01 X24.22458 Y9.66242
G01 X24.26177 Y9.69016
G01 X24.28158 Y9.70124
G01 X24.41968 Y9.77550
G01 X24.42918 Y9.78053
G01 X24.48381 Y9.80073
G01 X24.60939 Y9.84132
G01 X24.63365 Y9.84701
G01 X24.70147 Y9.85940
G01 X24.79692 Y9.87205
G01 X24.85752 Y9.87502
G01 X24.92633 Y9.87502
G01 X24.98694 Y9.87205
G01 X25.08236 Y9.85940
G01 X25.15016 Y9.84701
G01 X25.17444 Y9.84132
G01 X25.30002 Y9.80073
G01 X25.35465 Y9.78053
G01 X25.36418 Y9.77550
G01 X25.50228 Y9.70124
G01 X25.52209 Y9.69016
G01 X25.55927 Y9.66240
G01 X25.62839 Y9.60718
G01 X25.67162 Y9.57261
G01 X25.68109 Y9.56364
G01 X25.72885 Y9.51391
G01 X25.79984 Y9.43225
G01 X25.82867 Y9.39296
G01 X25.86661 Y9.33550
G01 X25.90357 Y9.27312
G01 X25.94045 Y9.19715
G01 X25.96745 Y9.13388
G01 X25.98023 Y9.09926
G01 X26.01241 Y8.98361
G01 X26.02763 Y8.91625
G01 X26.02780 Y8.91516
G01 X26.04187 Y8.76009
G01 X26.04414 Y8.72562
G01 X26.04187 Y8.69118
G01 X26.02780 Y8.53609
G01 X26.02763 Y8.53499
G01 X26.01241 Y8.46763
G01 X25.98023 Y8.35199
G01 X25.96745 Y8.31739
G01 X25.94048 Y8.25412
G01 X25.90360 Y8.17818
G01 X25.87860 Y8.13596
G01 X25.86697 Y8.11559
G01 X25.85795 Y8.09916
G01 X25.84629 Y8.07868
G01 X25.83238 Y8.05519
G01 X25.77406 Y7.93251
G01 X25.76484 Y7.90777
G01 X25.75054 Y7.87193
G01 X25.73126 Y7.82651
G01 X25.72592 Y7.81374
G01 X25.77538 Y7.74704
G01 X25.82600 Y7.68493
G01 X25.85534 Y7.65100
G01 X25.87848 Y7.62583
G01 X25.95041 Y7.55308
G01 X26.02062 Y7.48945
G01 X26.06926 Y7.44081
G01 X26.12305 Y7.38148
G01 X26.19930 Y7.28542
G01 X26.24678 Y7.23147
G01 X26.26816 Y7.20952
G01 X26.29610 Y7.17917
G01 X26.30675 Y7.16698
G01 X26.51254 Y6.99558
G01 X26.52287 Y6.98918
G01 X26.54058 Y6.97780
G01 X26.54058 Y6.97777
G01 X26.55793 Y6.93586
G01 X26.55793 Y4.82032
G01 X26.54081 Y4.77902
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.55793 Y4.82032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.55793 Y4.82032
G01 X26.57530 Y4.77846
G01 X26.59298 Y4.76708
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.04080 Y4.77899 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.04080 Y4.77899
G01 X30.05795 Y4.82032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.07527 Y4.77846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.07527 Y4.77846
G01 X30.05795 Y4.82032
G01 X30.05792 Y4.85390
G01 X30.05792 Y6.90236
G01 X30.05795 Y6.93586
G01 X30.03351 Y6.99487
G01 X29.90415 Y7.23690
G01 X29.85076 Y7.31676
G01 X29.67667 Y7.52893
G01 X29.60875 Y7.59685
G01 X29.47001 Y7.71069
G01 X29.39658 Y7.77094
G01 X29.31672 Y7.82430
G01 X29.17862 Y7.89811
G01 X29.09810 Y7.88211
G01 X29.03039 Y7.87086
G01 X29.00011 Y7.86690
G01 X28.94576 Y7.85793
G01 X28.82439 Y7.83380
G01 X28.76435 Y7.82484
G01 X28.64532 Y7.81310
G01 X28.60128 Y7.80660
G01 X28.59673 Y7.80571
G01 X28.55673 Y7.79974
G01 X28.39757 Y7.78407
G01 X28.36559 Y7.78249
G01 X28.32313 Y7.78249
G01 X28.29287 Y7.78102
G01 X28.20898 Y7.77274
G01 X28.17873 Y7.77127
G01 X28.01805 Y7.77127
G01 X27.98645 Y7.77157
G01 X27.82259 Y7.77157
G01 X27.77415 Y7.77399
G01 X27.69315 Y7.78199
G01 X27.63138 Y7.78493
G01 X27.60217 Y7.78493
G01 X27.52650 Y7.78877
G01 X27.37273 Y7.80391
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.57507 Y6.97726 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.57507 Y6.97726
G01 X26.55793 Y6.93586
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.99893 Y7.87076 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.99893 Y7.87076
G01 X24.07962 Y7.85943
G01 X24.09225 Y7.85819
G01 X24.17365 Y7.84625
G01 X24.25793 Y7.82948
G01 X24.31909 Y7.82034
G01 X24.47292 Y7.80518
G01 X24.48790 Y7.80345
G01 X24.51523 Y7.79984
G01 X24.52870 Y7.79829
G01 X24.68780 Y7.78262
G01 X24.72008 Y7.78102
G01 X24.79288 Y7.78102
G01 X24.82285 Y7.77955
G01 X24.87703 Y7.77421
G01 X24.90698 Y7.77274
G01 X25.06456 Y7.77274
G01 X25.09811 Y7.77439
G01 X25.09849 Y7.77442
G01 X25.13413 Y7.77612
G01 X25.26189 Y7.77612
G01 X25.30929 Y7.77848
G01 X25.42511 Y7.78991
G01 X25.47942 Y7.79288
G01 X25.48879 Y7.79301
G01 X25.55285 Y7.79667
G01 X25.72592 Y7.81374
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X26.52287 Y6.98918 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X26.52287 Y6.98918
G01 X26.54058 Y6.97777
G01 X26.54241 Y6.97660
G01 X26.57271 Y6.97582
G01 X26.57322 Y6.97615
G01 X26.57507 Y6.97726
G01 X26.59384 Y6.98872
G01 X26.79854 Y7.15621
G01 X26.81929 Y7.17940
G01 X26.84093 Y7.20259
G01 X26.86908 Y7.23147
G01 X26.91655 Y7.28542
G01 X26.99280 Y7.38148
G01 X27.04660 Y7.44081
G01 X27.09524 Y7.48945
G01 X27.16252 Y7.55044
G01 X27.17662 Y7.56357
G01 X27.18434 Y7.57096
G01 X27.27395 Y7.67434
G01 X27.28543 Y7.69032
G01 X27.31208 Y7.72529
G01 X27.33611 Y7.75519
G01 X27.37273 Y7.80391
G01 X27.36059 Y7.83380
G01 X27.32701 Y7.91269
G01 X27.30238 Y7.96517
G01 X27.27370 Y8.02077
G01 X27.25434 Y8.05593
G01 X27.21924 Y8.11572
G01 X27.18226 Y8.17815
G01 X27.14538 Y8.25410
G01 X27.11838 Y8.31744
G01 X27.10560 Y8.35199
G01 X27.07421 Y8.46492
G01 X27.07345 Y8.46768
G01 X27.05823 Y8.53499
G01 X27.05805 Y8.53609
G01 X27.04398 Y8.69118
G01 X27.04172 Y8.72562
G01 X27.04398 Y8.76009
G01 X27.05805 Y8.91518
G01 X27.05823 Y8.91625
G01 X27.07342 Y8.98356
G01 X27.10560 Y9.09923
G01 X27.11838 Y9.13380
G01 X27.14540 Y9.19720
G01 X27.18226 Y9.27312
G01 X27.21927 Y9.33555
G01 X27.25719 Y9.39296
G01 X27.28602 Y9.43225
G01 X27.35701 Y9.51391
G01 X27.37522 Y9.53403
G01 X27.38950 Y9.54924
G01 X27.39742 Y9.55752
G01 X27.40413 Y9.56443
G01 X27.47139 Y9.64452
G01 X27.47517 Y9.66636
G01 X27.48487 Y9.72755
G01 X27.49369 Y9.83857
G01 X27.49369 Y12.66039
G01 X27.49313 Y12.68797
G01 X27.49252 Y12.70349
G01 X27.47423 Y12.83844
G01 X27.47075 Y12.84327
G01 X27.43433 Y12.89341
G01 X27.36209 Y12.97806
G01 X26.29877 Y14.04138
G01 X26.27507 Y14.06628
G01 X26.25198 Y14.09175
G01 X26.23154 Y14.11931
G01 X26.19326 Y14.17659
G01 X26.17561 Y14.20603
G01 X26.16092 Y14.23709
G01 X26.13459 Y14.30069
G01 X26.12303 Y14.33303
G01 X26.11467 Y14.36635
G01 X26.10123 Y14.43379
G01 X26.09621 Y14.46782
G01 X26.09450 Y14.50206
G01 X26.09367 Y14.53651
G01 X26.09367 Y17.47417
G01 X26.09295 Y17.50589
G01 X26.09214 Y17.52388
G01 X26.07037 Y17.66977
G01 X26.05488 Y17.73096
G01 X25.94784 Y17.97335
G01 X25.92422 Y17.98788
G01 X25.86903 Y18.01430
G01 X25.84551 Y18.02263
G01 X25.84551 Y18.02266
G01 X25.82570 Y18.01781
G01 X25.72717 Y17.99147
G01 X25.58945 Y17.94194
G01 X25.57170 Y17.93371
G01 X25.53192 Y17.91659
G01 X25.50461 Y17.90579
G01 X25.42968 Y17.87097
G01 X25.36420 Y17.83576
G01 X25.35465 Y17.83071
G01 X25.29997 Y17.81049
G01 X25.17446 Y17.76993
G01 X25.15011 Y17.76424
G01 X25.08236 Y17.75184
G01 X24.98694 Y17.73919
G01 X24.92633 Y17.73622
G01 X24.85752 Y17.73622
G01 X24.79692 Y17.73919
G01 X24.70147 Y17.75184
G01 X24.63370 Y17.76424
G01 X24.60939 Y17.76993
G01 X24.48386 Y17.81049
G01 X24.42920 Y17.83071
G01 X24.41965 Y17.83576
G01 X24.28153 Y17.91006
G01 X24.26177 Y17.92108
G01 X24.22458 Y17.94884
G01 X24.11221 Y18.03866
G01 X24.10274 Y18.04760
G01 X24.05504 Y18.09733
G01 X23.98404 Y18.17899
G01 X23.95521 Y18.21826
G01 X23.91724 Y18.27572
G01 X23.88026 Y18.33815
G01 X23.84338 Y18.41410
G01 X23.81638 Y18.47744
G01 X23.80360 Y18.51199
G01 X23.77145 Y18.62768
G01 X23.76593 Y18.64869
G01 X23.75623 Y18.69499
G01 X23.75605 Y18.69609
G01 X23.74198 Y18.85118
G01 X23.73972 Y18.88562
G01 X23.74198 Y18.92009
G01 X23.75605 Y19.07518
G01 X23.75623 Y19.07625
G01 X23.77142 Y19.14356
G01 X23.80358 Y19.25915
G01 X23.81638 Y19.29380
G01 X23.84340 Y19.35720
G01 X23.88028 Y19.43312
G01 X23.91727 Y19.49555
G01 X23.95519 Y19.55296
G01 X23.98404 Y19.59227
G01 X24.05044 Y19.66865
G01 X24.05499 Y19.67394
G01 X24.07683 Y19.69956
G01 X24.09202 Y19.71681
G01 X24.10060 Y19.72626
G01 X24.19044 Y19.84767
G01 X24.19611 Y19.85710
G01 X24.22567 Y19.90297
G01 X24.24460 Y19.93042
G01 X24.27266 Y19.97348
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X21.95517 Y19.97348 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X21.95517 Y19.97348
G01 X21.98326 Y20.01656
G01 X22.00223 Y20.04409
G01 X22.03175 Y20.08986
G01 X22.03749 Y20.09941
G01 X22.12725 Y20.22070
G01 X22.13584 Y20.23014
G01 X22.15103 Y20.24739
G01 X22.17287 Y20.27302
G01 X22.17742 Y20.27830
G01 X22.24381 Y20.35468
G01 X22.27267 Y20.39400
G01 X22.31061 Y20.45146
G01 X22.34757 Y20.51384
G01 X22.38445 Y20.58981
G01 X22.41145 Y20.65308
G01 X22.42423 Y20.68770
G01 X22.45641 Y20.80335
G01 X22.47163 Y20.87068
G01 X22.47180 Y20.87177
G01 X22.48588 Y21.02687
G01 X22.49222 Y21.09641
G01 X22.49741 Y21.13924
G01 X22.50035 Y21.15879
G01 X22.52423 Y21.19435
G01 X22.60315 Y21.29230
G01 X22.60825 Y21.29758
G01 X22.61724 Y21.30675
G01 X23.00388 Y21.69339
G01 X23.08859 Y21.76568
G01 X23.13871 Y21.80207
G01 X23.37698 Y21.92102
G01 X23.44229 Y21.94223
G01 X23.45524 Y21.94465
G01 X23.54206 Y21.92138
G01 X23.63329 Y21.87490
G01 X23.71287 Y21.81051
G01 X23.75615 Y21.76725
G01 X23.78973 Y21.72575
G01 X23.78976 Y21.72575
G01 X23.79314 Y21.55976
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X23.45224 Y21.94409 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X23.45224 Y21.94409
G01 X23.70530 Y22.19715
G01 X23.73759 Y22.23276
G01 X23.78112 Y22.28582
G01 X23.83449 Y22.36568
G01 X23.86685 Y22.42618
G01 X23.90360 Y22.51493
G01 X23.92351 Y22.58058
G01 X23.94226 Y22.67479
G01 X23.94719 Y22.72511
G01 X23.94155 Y22.74378
G01 X23.92590 Y22.79110
G01 X23.89303 Y22.88300
G01 X23.86807 Y22.96512
G01 X23.82877 Y23.12193
G01 X23.81468 Y23.19262
G01 X23.79141 Y23.34947
G01 X23.78508 Y23.41353
G01 X23.77739 Y23.57035
G01 X23.77739 Y23.63230
G01 X23.78508 Y23.78912
G01 X23.79141 Y23.85323
G01 X23.81468 Y24.01002
G01 X23.81671 Y24.02295
G01 X23.84876 Y24.07002
G01 X23.94323 Y24.19735
G01 X23.98298 Y24.24583
G01 X24.08841 Y24.36217
G01 X24.13108 Y24.40484
G01 X24.24742 Y24.51027
G01 X24.29590 Y24.55008
G01 X24.42323 Y24.64451
G01 X24.48171 Y24.68355
G01 X24.62039 Y24.76664
G01 X24.69448 Y24.80616
G01 X24.84505 Y24.87741
G01 X24.87304 Y24.88896
G01 X24.93997 Y24.88896
G01 X25.09603 Y24.87357
G01 X25.19024 Y24.85485
G01 X25.34033 Y24.80931
G01 X25.42907 Y24.77255
G01 X25.56738 Y24.69864
G01 X25.64724 Y24.64530
G01 X25.76847 Y24.54578
G01 X25.83639 Y24.47786
G01 X25.93588 Y24.35663
G01 X25.98925 Y24.27675
G01 X26.06319 Y24.13844
G01 X26.09994 Y24.04970
G01 X26.14546 Y23.89963
G01 X26.16420 Y23.80542
G01 X26.17957 Y23.64934
G01 X26.17957 Y23.55328
G01 X26.17279 Y23.48452
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.67640 Y22.33131 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.67640 Y22.33131
G01 X24.59362 Y22.34779
G01 X24.44355 Y22.39331
G01 X24.35481 Y22.43006
G01 X24.21650 Y22.50400
G01 X24.13662 Y22.55737
G01 X24.01539 Y22.65686
G01 X23.94747 Y22.72478
G01 X23.94719 Y22.72511
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.28740 Y24.46656 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.28740 Y24.46656
G01 X22.29916 Y24.52564
G01 X22.31907 Y24.59130
G01 X22.32834 Y24.61368
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.06295 Y23.50624 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.06295 Y23.50624
G01 X19.06757 Y23.55328
G01 X19.06757 Y23.64934
G01 X19.06295 Y23.69641
G01 X19.18339 Y23.81685
G01 X19.23323 Y23.77830
G01 X19.31590 Y23.73641
G01 X19.37288 Y23.71403
G01 X19.47173 Y23.68673
G01 X19.57410 Y23.68061
G01 X19.67549 Y23.69592
G01 X19.73470 Y23.71134
G01 X19.83051 Y23.74733
G01 X19.91674 Y23.80243
G01 X19.93190 Y23.81739
G01 X20.05294 Y23.69638
G01 X20.04829 Y23.64934
G01 X20.04829 Y23.55328
G01 X20.05294 Y23.50626
G01 X19.93246 Y23.38582
G01 X19.88253 Y23.42442
G01 X19.79982 Y23.46631
G01 X19.74288 Y23.48866
G01 X19.64412 Y23.51591
G01 X19.54186 Y23.52204
G01 X19.44057 Y23.50677
G01 X19.38136 Y23.49138
G01 X19.28545 Y23.45539
G01 X19.19911 Y23.40022
G01 X19.18393 Y23.38526
G01 X19.06295 Y23.50624
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.83928 Y24.48167 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.83928 Y24.48167
G01 X16.90339 Y24.54578
G01 X17.02460 Y24.64530
G01 X17.10450 Y24.69864
G01 X17.19180 Y24.74530
G01 X17.24281 Y24.77255
G01 X17.33155 Y24.80931
G01 X17.48159 Y24.85485
G01 X17.57583 Y24.87357
G01 X17.73191 Y24.88896
G01 X17.82797 Y24.88896
G01 X17.87499 Y24.88434
G01 X17.89886 Y24.90822
G01 X17.87811 Y24.91131
G01 X17.68174 Y24.91131
G01 X17.48756 Y24.88208
G01 X17.32244 Y24.83110
G01 X17.24740 Y24.81431
G01 X17.17067 Y24.80938
G01 X17.10951 Y24.81030
G01 X17.00783 Y24.82254
G01 X16.91091 Y24.85564
G01 X16.84085 Y24.89747
G01 X16.83930 Y24.89994
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.63872 Y27.58957 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.63872 Y27.58957
G01 X16.63450 Y27.65360
G01 X16.64558 Y27.66846
G01 X16.64560 Y27.66848
G01 X16.66933 Y27.67831
G01 X16.69818 Y27.68979
G01 X16.76206 Y27.71405
G01 X16.83277 Y27.73772
G01 X16.87192 Y27.74903
G01 X16.98639 Y27.77290
G01 X17.03643 Y27.77933
G01 X17.12627 Y27.78507
G01 X17.67194 Y27.78507
G01 X17.70633 Y27.78593
G01 X17.76216 Y27.78868
G01 X17.86236 Y27.80153
G01 X17.93026 Y27.81365
G01 X17.94065 Y27.81603
G01 X18.08014 Y27.85987
G01 X18.11278 Y27.87100
G01 X18.14377 Y27.88621
G01 X18.27339 Y27.95385
G01 X18.28240 Y27.95952
G01 X18.33897 Y27.99891
G01 X18.41893 Y28.06069
G01 X18.46033 Y28.09825
G01 X18.47887 Y28.11568
G01 X18.51006 Y28.14605
G01 X18.56170 Y28.19177
G01 X18.61039 Y28.23094
G01 X18.63275 Y28.24824
G01 X18.69884 Y28.29757
G01 X18.83351 Y28.38009
G01 X18.84318 Y28.39818
G01 X18.87994 Y28.48692
G01 X18.92546 Y28.63701
G01 X18.94420 Y28.73125
G01 X18.95957 Y28.88730
G01 X18.95957 Y28.89375
G01 X18.92401 Y28.97984
G01 X18.85279 Y29.13041
G01 X18.82421 Y29.18542
G01 X18.81568 Y29.20041
G01 X18.78327 Y29.26411
G01 X18.76417 Y29.30663
G01 X18.74865 Y29.34394
G01 X18.73661 Y29.37541
G01 X18.72104 Y29.40716
G01 X18.65337 Y29.53678
G01 X18.64773 Y29.54580
G01 X18.60834 Y29.60236
G01 X18.54656 Y29.68230
G01 X18.51720 Y29.71471
G01 X18.50902 Y29.72373
G01 X18.46033 Y29.77242
G01 X18.41893 Y29.80996
G01 X18.37986 Y29.84013
G01 X18.34016 Y29.87318
G01 X18.29536 Y29.91336
G01 X18.28741 Y29.92040
G01 X18.24809 Y29.95466
G01 X18.16981 Y30.03307
G01 X18.10821 Y30.10358
G01 X18.06249 Y30.16050
G01 X18.06246 Y30.16050
G01 X18.06211 Y30.16099
G01 X17.97024 Y30.18885
G01 X17.88741 Y30.20531
G01 X16.65637 Y30.20533
G01 X16.57362 Y30.18885
G01 X16.42356 Y30.14331
G01 X16.33481 Y30.10655
G01 X16.19648 Y30.03264
G01 X16.11662 Y29.97927
G01 X15.99539 Y29.87978
G01 X15.92747 Y29.81186
G01 X15.85891 Y29.72830
G01 X15.84146 Y29.67955
G01 X15.81413 Y29.58969
G01 X15.77484 Y29.43284
G01 X15.75924 Y29.35476
G01 X15.73600 Y29.19800
G01 X15.72897 Y29.12667
G01 X15.72125 Y28.96985
G01 X15.72125 Y28.90079
G01 X15.72897 Y28.74400
G01 X15.73600 Y28.67272
G01 X15.75924 Y28.51588
G01 X15.77484 Y28.43782
G01 X15.78281 Y28.40597
G01 X15.85810 Y28.30450
G01 X15.90700 Y28.24486
G01 X16.01241 Y28.12853
G01 X16.06514 Y28.07582
G01 X16.18147 Y27.97036
G01 X16.24111 Y27.92144
G01 X16.36844 Y27.82701
G01 X16.43935 Y27.77969
G01 X16.57801 Y27.69655
G01 X16.58350 Y27.69330
G01 X16.61789 Y27.67298
G01 X16.61789 Y27.67295
G01 X16.62366 Y27.66958
G01 X16.62559 Y27.66747
G01 X16.63427 Y27.65685
G01 X16.63872 Y27.58957
G01 X16.64807 Y27.49477
G01 X16.65838 Y27.42249
G01 X16.65848 Y27.42200
G01 X16.66765 Y27.35926
G01 X16.66882 Y27.34806
G01 X16.67926 Y27.27953
G01 X16.68558 Y27.24819
G01 X16.69196 Y27.21187
G01 X16.69704 Y27.17781
G01 X16.69871 Y27.14357
G01 X16.69955 Y27.10910
G01 X16.69955 Y25.39394
G01 X16.70786 Y25.28591
G01 X16.71710 Y25.22617
G01 X16.79856 Y24.97730
G01 X16.82922 Y24.91606
G01 X16.83930 Y24.89994
G01 X16.83928 Y24.48167
G01 X16.83714 Y24.47649
G01 X16.78103 Y24.31965
G01 X16.75604 Y24.23755
G01 X16.71675 Y24.08071
G01 X16.70263 Y24.01005
G01 X16.67938 Y23.85323
G01 X16.67309 Y23.78912
G01 X16.66534 Y23.63230
G01 X16.66534 Y23.57035
G01 X16.67309 Y23.41353
G01 X16.67938 Y23.34947
G01 X16.70263 Y23.19262
G01 X16.71301 Y23.13756
G01 X16.72223 Y23.12486
G01 X16.81665 Y22.99753
G01 X16.85845 Y22.94657
G01 X16.96391 Y22.83022
G01 X17.00882 Y22.78533
G01 X17.12515 Y22.67987
G01 X17.17616 Y22.63804
G01 X17.30351 Y22.54360
G01 X17.36468 Y22.50276
G01 X17.50336 Y22.41965
G01 X17.58070 Y22.37838
G01 X17.68019 Y22.33131
G01 X17.82622 Y22.33131
G01 X17.87966 Y22.33133
G01 X17.97915 Y22.28427
G01 X18.05642 Y22.24304
G01 X18.19510 Y22.15994
G01 X18.25236 Y22.12199
G01 X18.25639 Y22.11902
G01 X18.29538 Y22.09245
G01 X18.31954 Y22.07708
G01 X18.36361 Y22.05127
G01 X18.39033 Y22.03690
G01 X18.41006 Y22.02587
G01 X18.44727 Y21.99811
G01 X18.55962 Y21.90830
G01 X18.56912 Y21.89933
G01 X18.61685 Y21.84960
G01 X18.68781 Y21.76796
G01 X18.71667 Y21.72864
G01 X18.75461 Y21.67119
G01 X18.79157 Y21.60881
G01 X18.82845 Y21.53283
G01 X18.85545 Y21.46956
G01 X18.86823 Y21.43494
G01 X18.90041 Y21.31932
G01 X18.91563 Y21.25196
G01 X18.91580 Y21.25087
G01 X18.92987 Y21.09578
G01 X18.93214 Y21.06133
G01 X18.92987 Y21.02687
G01 X18.91580 Y20.87177
G01 X18.91563 Y20.87068
G01 X18.90041 Y20.80335
G01 X18.86823 Y20.68770
G01 X18.85545 Y20.65308
G01 X18.82845 Y20.58981
G01 X18.79157 Y20.51384
G01 X18.75461 Y20.45146
G01 X18.71667 Y20.39400
G01 X18.68781 Y20.35468
G01 X18.62142 Y20.27830
G01 X18.61687 Y20.27302
G01 X18.59503 Y20.24739
G01 X18.57984 Y20.23014
G01 X18.57125 Y20.22070
G01 X18.48149 Y20.09941
G01 X18.47575 Y20.08986
G01 X18.44623 Y20.04409
G01 X18.42726 Y20.01656
G01 X18.39917 Y19.97348
G01 X17.16066 Y19.97348
G01 X17.13331 Y20.01785
G01 X17.08533 Y20.09133
G01 X17.04921 Y20.14224
G01 X17.01088 Y20.19199
G01 X16.98810 Y20.22009
G01 X16.94299 Y20.27302
G01 X16.93841 Y20.27830
G01 X16.87204 Y20.35468
G01 X16.84319 Y20.39400
G01 X16.80527 Y20.45140
G01 X16.76823 Y20.51384
G01 X16.73140 Y20.58976
G01 X16.70438 Y20.65313
G01 X16.69160 Y20.68773
G01 X16.65942 Y20.80340
G01 X16.65541 Y20.81849
G01 X16.64423 Y20.87068
G01 X16.64403 Y20.87175
G01 X16.62998 Y21.02687
G01 X16.62724 Y21.07614
G01 X16.62696 Y21.08968
G01 X16.62683 Y21.09608
G01 X16.62683 Y21.09710
G01 X16.61837 Y21.19987
G01 X16.60318 Y21.22158
G01 X16.56679 Y21.27172
G01 X16.49447 Y21.35648
G01 X16.09648 Y21.75445
G01 X16.08548 Y21.76522
G01 X16.07898 Y21.77144
G01 X15.97771 Y21.85201
G01 X15.92556 Y21.88640
G01 X15.66750 Y22.00047
G01 X15.64723 Y22.00606
G01 X15.60565 Y21.99550
G01 X15.50954 Y21.96009
G01 X15.42287 Y21.90548
G01 X15.34947 Y21.83403
G01 X15.31035 Y21.78701
G01 X15.29938 Y21.77063
G01 X15.29933 Y21.76956
G01 X15.29750 Y21.72402
G01 X15.30588 Y21.55072
G01 X15.31358 Y21.49821
G01 X15.31665 Y21.47480
G01 X15.32104 Y21.43642
G01 X15.34246 Y21.32633
G01 X15.34439 Y21.31932
G01 X15.34911 Y21.30152
G01 X15.35963 Y21.25196
G01 X15.35980 Y21.25089
G01 X15.37385 Y21.09578
G01 X15.37614 Y21.06131
G01 X15.37385 Y21.02687
G01 X15.35980 Y20.87177
G01 X15.35963 Y20.87071
G01 X15.34439 Y20.80335
G01 X15.31223 Y20.68770
G01 X15.29943 Y20.65311
G01 X15.27245 Y20.58981
G01 X15.23557 Y20.51381
G01 X15.19861 Y20.45146
G01 X15.16067 Y20.39400
G01 X15.13181 Y20.35468
G01 X15.06542 Y20.27830
G01 X15.06087 Y20.27302
G01 X15.03903 Y20.24739
G01 X15.02384 Y20.23014
G01 X15.01525 Y20.22070
G01 X14.92549 Y20.09941
G01 X14.91975 Y20.08986
G01 X14.89023 Y20.04409
G01 X14.87126 Y20.01656
G01 X14.84317 Y19.97348
G01 X13.60466 Y19.97348
G01 X13.57731 Y20.01785
G01 X13.52933 Y20.09133
G01 X13.49321 Y20.14224
G01 X13.45488 Y20.19199
G01 X13.43210 Y20.22009
G01 X13.38699 Y20.27302
G01 X13.38244 Y20.27830
G01 X13.31604 Y20.35468
G01 X13.28719 Y20.39400
G01 X13.24927 Y20.45140
G01 X13.21226 Y20.51384
G01 X13.17540 Y20.58976
G01 X13.14838 Y20.65313
G01 X13.12542 Y20.71526
G01 X13.12435 Y20.71813
G01 X13.12399 Y20.71904
G01 X13.12224 Y20.72390
G01 X13.08981 Y20.79928
G01 X13.06341 Y20.85211
G01 X13.05595 Y20.86751
G01 X13.03553 Y20.91074
G01 X12.97604 Y21.01721
G01 X12.93629 Y21.07873
G01 X12.93517 Y21.08049
G01 X12.92722 Y21.08452
G01 X12.82816 Y21.11104
G01 X12.76773 Y21.12059
G01 X12.66552 Y21.12593
G01 X12.66245 Y21.12544
G01 X12.66006 Y21.12341
G01 X12.62775 Y21.09580
G01 X12.56923 Y21.04185
G01 X12.51328 Y20.98602
G01 X12.50812 Y20.98092
G01 X12.46751 Y20.94112
G01 X12.45689 Y20.93050
G01 X12.40629 Y20.87894
G01 X12.38706 Y20.85852
G01 X12.35973 Y20.82839
G01 X12.33603 Y20.80347
G01 X11.65824 Y20.12567
G01 X11.64541 Y20.11254
G01 X11.63809 Y20.10482
G01 X11.55618 Y20.00055
G01 X11.52217 Y19.94803
G01 X11.45382 Y19.81811
G01 X11.48486 Y19.75748
G01 X11.50965 Y19.71338
G01 X11.52293 Y19.68874
G01 X11.53881 Y19.65791
G01 X11.59847 Y19.56141
G01 X11.60467 Y19.55296
G01 X11.64261 Y19.49550
G01 X11.67957 Y19.43312
G01 X11.71645 Y19.35715
G01 X11.74345 Y19.29388
G01 X11.75623 Y19.25926
G01 X11.78841 Y19.14361
G01 X11.80363 Y19.07625
G01 X11.80380 Y19.07516
G01 X11.81787 Y18.92009
G01 X11.82014 Y18.88562
G01 X11.81787 Y18.85118
G01 X11.80380 Y18.69609
G01 X11.80363 Y18.69499
G01 X11.78841 Y18.62763
G01 X11.75623 Y18.51199
G01 X11.74345 Y18.47739
G01 X11.71648 Y18.41412
G01 X11.67957 Y18.33815
G01 X11.64264 Y18.27577
G01 X11.60464 Y18.21826
G01 X11.57581 Y18.17899
G01 X11.50482 Y18.09733
G01 X11.45712 Y18.04762
G01 X11.44762 Y18.03866
G01 X11.33527 Y17.94884
G01 X11.29809 Y17.92108
G01 X11.27833 Y17.91006
G01 X11.14020 Y17.83576
G01 X11.13063 Y17.83071
G01 X11.07597 Y17.81049
G01 X10.95046 Y17.76993
G01 X10.92611 Y17.76424
G01 X10.85836 Y17.75184
G01 X10.76294 Y17.73919
G01 X10.70233 Y17.73622
G01 X10.63352 Y17.73622
G01 X10.57292 Y17.73919
G01 X10.47747 Y17.75184
G01 X10.40970 Y17.76424
G01 X10.38539 Y17.76993
G01 X10.25986 Y17.81049
G01 X10.20520 Y17.83071
G01 X10.19565 Y17.83576
G01 X10.05753 Y17.91006
G01 X10.03777 Y17.92108
G01 X10.00058 Y17.94884
G01 X9.88821 Y18.03866
G01 X9.87874 Y18.04760
G01 X9.83104 Y18.09733
G01 X9.76004 Y18.17899
G01 X9.73121 Y18.21826
G01 X9.69324 Y18.27572
G01 X9.65626 Y18.33815
G01 X9.61938 Y18.41410
G01 X9.59238 Y18.47744
G01 X9.57960 Y18.51199
G01 X9.54745 Y18.62768
G01 X9.54193 Y18.64869
G01 X9.53223 Y18.69499
G01 X9.53205 Y18.69609
G01 X9.51798 Y18.85118
G01 X9.51572 Y18.88562
G01 X9.51798 Y18.92009
G01 X9.53205 Y19.07518
G01 X9.53223 Y19.07625
G01 X9.54742 Y19.14356
G01 X9.57958 Y19.25915
G01 X9.59238 Y19.29380
G01 X9.61940 Y19.35720
G01 X9.65628 Y19.43312
G01 X9.69327 Y19.49555
G01 X9.73119 Y19.55296
G01 X9.76002 Y19.59225
G01 X9.83101 Y19.67391
G01 X9.84922 Y19.69403
G01 X9.86350 Y19.70924
G01 X9.87142 Y19.71752
G01 X9.87813 Y19.72443
G01 X9.94539 Y19.80452
G01 X9.94917 Y19.82636
G01 X9.95887 Y19.88755
G01 X9.96769 Y19.99857
G01 X9.96769 Y20.12567
G01 X9.96853 Y20.16012
G01 X9.97020 Y20.19441
G01 X9.97526 Y20.22842
G01 X9.98867 Y20.29588
G01 X9.99700 Y20.32918
G01 X10.00858 Y20.36154
G01 X10.03492 Y20.42512
G01 X10.04960 Y20.45618
G01 X10.06726 Y20.48562
G01 X10.10553 Y20.54290
G01 X10.12598 Y20.57048
G01 X10.14907 Y20.59596
G01 X10.17277 Y20.62085
G01 X11.00904 Y21.45709
G01 X11.02816 Y21.47698
G01 X11.03870 Y21.48841
G01 X11.12118 Y21.59674
G01 X11.12212 Y21.60253
G01 X11.13182 Y21.66372
G01 X11.14063 Y21.77474
G01 X11.14063 Y21.80114
G01 X11.13571 Y21.88412
G01 X11.13025 Y21.93032
G01 X11.07421 Y22.14071
G01 X11.04886 Y22.20187
G01 X10.99197 Y22.30601
G01 X10.91193 Y22.34678
G01 X10.82311 Y22.37055
G01 X10.81209 Y22.36766
G01 X10.74676 Y22.34642
G01 X10.50853 Y22.22750
G01 X10.45842 Y22.19110
G01 X10.37371 Y22.11881
G01 X8.21074 Y19.95585
G01 X8.14478 Y19.87968
G01 X8.11105 Y19.83464
G01 X8.02126 Y19.68046
G01 X8.04338 Y19.62075
G01 X8.06571 Y19.56693
G01 X8.06784 Y19.56169
G01 X8.09330 Y19.49906
G01 X8.11255 Y19.45580
G01 X8.16045 Y19.35715
G01 X8.18745 Y19.29388
G01 X8.20023 Y19.25923
G01 X8.23241 Y19.14361
G01 X8.24763 Y19.07625
G01 X8.24780 Y19.07516
G01 X8.26187 Y18.92009
G01 X8.26414 Y18.88562
G01 X8.26187 Y18.85118
G01 X8.24780 Y18.69609
G01 X8.24763 Y18.69499
G01 X8.23241 Y18.62763
G01 X8.20023 Y18.51199
G01 X8.18745 Y18.47739
G01 X8.16048 Y18.41412
G01 X8.12357 Y18.33815
G01 X8.08664 Y18.27577
G01 X8.04864 Y18.21826
G01 X8.01981 Y18.17899
G01 X7.94882 Y18.09733
G01 X7.90112 Y18.04762
G01 X7.89162 Y18.03866
G01 X7.77927 Y17.94884
G01 X7.74209 Y17.92108
G01 X7.72233 Y17.91006
G01 X7.58420 Y17.83576
G01 X7.57463 Y17.83071
G01 X7.51997 Y17.81049
G01 X7.39446 Y17.76993
G01 X7.37011 Y17.76424
G01 X7.30236 Y17.75184
G01 X7.20694 Y17.73919
G01 X7.14633 Y17.73622
G01 X7.07752 Y17.73622
G01 X7.01692 Y17.73919
G01 X6.92147 Y17.75184
G01 X6.85370 Y17.76424
G01 X6.82939 Y17.76993
G01 X6.70386 Y17.81049
G01 X6.64920 Y17.83071
G01 X6.63965 Y17.83576
G01 X6.50153 Y17.91006
G01 X6.48177 Y17.92108
G01 X6.44458 Y17.94884
G01 X6.33221 Y18.03866
G01 X6.32274 Y18.04760
G01 X6.27504 Y18.09733
G01 X6.20404 Y18.17899
G01 X6.17521 Y18.21826
G01 X6.13724 Y18.27572
G01 X6.10026 Y18.33815
G01 X6.06338 Y18.41410
G01 X6.03638 Y18.47744
G01 X6.02360 Y18.51199
G01 X5.99145 Y18.62768
G01 X5.98593 Y18.64869
G01 X5.97623 Y18.69499
G01 X5.97605 Y18.69609
G01 X5.96198 Y18.85118
G01 X5.95972 Y18.88562
G01 X5.96198 Y18.92009
G01 X5.97605 Y19.07518
G01 X5.97623 Y19.07625
G01 X5.99142 Y19.14356
G01 X6.02358 Y19.25915
G01 X6.03638 Y19.29380
G01 X6.06340 Y19.35720
G01 X6.10028 Y19.43312
G01 X6.13727 Y19.49555
G01 X6.17519 Y19.55296
G01 X6.20404 Y19.59227
G01 X6.27501 Y19.67391
G01 X6.30308 Y19.70434
G01 X6.32241 Y19.72408
G01 X6.36942 Y19.77709
G01 X6.39089 Y19.80381
G01 X6.39569 Y19.82380
G01 X6.40092 Y19.84734
G01 X6.40808 Y19.88219
G01 X6.41494 Y19.92100
G01 X6.41926 Y19.95006
G01 X6.43267 Y20.01752
G01 X6.44103 Y20.05085
G01 X6.45258 Y20.08318
G01 X6.47892 Y20.14676
G01 X6.49360 Y20.17782
G01 X6.51126 Y20.20726
G01 X6.54953 Y20.26454
G01 X6.56998 Y20.29212
G01 X6.59307 Y20.31760
G01 X6.61677 Y20.34249
G01 X9.98590 Y23.71160
G01 X10.00503 Y23.73148
G01 X10.01557 Y23.74289
G01 X10.09804 Y23.85122
G01 X10.09901 Y23.85719
G01 X10.10868 Y23.91838
G01 X10.11747 Y24.02925
G01 X10.11747 Y27.33585
G01 X10.11529 Y27.39104
G01 X10.11285 Y27.42203
G01 X10.09502 Y27.53452
G01 X10.08605 Y27.57212
G01 X10.07975 Y27.59683
G01 X10.06726 Y27.64296
G01 X10.06279 Y27.66010
G01 X10.05237 Y27.70178
G01 X10.05194 Y27.70201
G01 X9.84031 Y27.76660
G01 X9.77912 Y27.77628
G01 X9.66822 Y27.78507
G01 X9.25194 Y27.78507
G01 X9.21752 Y27.78593
G01 X9.16167 Y27.78868
G01 X9.06147 Y27.80153
G01 X8.99355 Y27.81365
G01 X8.98321 Y27.81603
G01 X8.84369 Y27.85987
G01 X8.81107 Y27.87100
G01 X8.78009 Y27.88621
G01 X8.65047 Y27.95385
G01 X8.64145 Y27.95952
G01 X8.58489 Y27.99891
G01 X8.50493 Y28.06069
G01 X8.46353 Y28.09825
G01 X8.41483 Y28.14692
G01 X8.37732 Y28.18832
G01 X8.31552 Y28.26828
G01 X8.27615 Y28.32485
G01 X8.27049 Y28.33386
G01 X8.20282 Y28.46348
G01 X8.18758 Y28.49447
G01 X8.17643 Y28.52716
G01 X8.13264 Y28.66660
G01 X8.13025 Y28.67704
G01 X8.11814 Y28.74489
G01 X8.10526 Y28.84511
G01 X8.10252 Y28.90092
G01 X8.10252 Y28.96973
G01 X8.10526 Y29.02558
G01 X8.11814 Y29.12578
G01 X8.13025 Y29.19365
G01 X8.13264 Y29.20404
G01 X8.17643 Y29.34349
G01 X8.18761 Y29.37620
G01 X8.20282 Y29.40719
G01 X8.27046 Y29.53676
G01 X8.27612 Y29.54582
G01 X8.31552 Y29.60236
G01 X8.37729 Y29.68232
G01 X8.41483 Y29.72375
G01 X8.46350 Y29.77242
G01 X8.50490 Y29.80993
G01 X8.54399 Y29.84013
G01 X8.58369 Y29.87318
G01 X8.62850 Y29.91336
G01 X8.63645 Y29.92040
G01 X8.67577 Y29.95466
G01 X8.75405 Y30.03307
G01 X8.81562 Y30.10358
G01 X8.86137 Y30.16050
G01 X8.86286 Y30.17473
G01 X8.86286 Y30.23592
G01 X8.86137 Y30.25014
G01 X8.86137 Y30.25017
G01 X8.81557 Y30.30716
G01 X8.75410 Y30.37755
G01 X8.67569 Y30.45606
G01 X8.63650 Y30.49022
G01 X8.62845 Y30.49733
G01 X8.58369 Y30.53747
G01 X8.54399 Y30.57051
G01 X8.50490 Y30.60071
G01 X8.46350 Y30.63823
G01 X8.41483 Y30.68689
G01 X8.37737 Y30.72824
G01 X8.36223 Y30.74783
G01 X8.35057 Y30.76253
G01 X8.34402 Y30.77056
G01 X8.31293 Y30.80617
G01 X8.26416 Y30.85842
G01 X8.25469 Y30.86838
G01 X8.21044 Y30.91410
G01 X8.14666 Y30.97343
G01 X8.07257 Y31.03566
G01 X8.03216 Y31.06573
G01 X8.03213 Y31.06573
G01 X8.03142 Y31.06629
G01 X7.96576 Y31.06629
G01 X7.90617 Y31.06002
G01 X7.63295 Y31.33325
G01 X7.63757 Y31.38029
G01 X7.63757 Y31.47635
G01 X7.63295 Y31.52342
G01 X7.95225 Y31.84272
G01 X7.99678 Y31.84272
G01 X8.01986 Y31.84516
G01 X8.02017 Y31.84541
G01 X8.02019 Y31.84544
G01 X8.09556 Y31.90802
G01 X8.16116 Y31.96947
G01 X8.21798 Y32.02824
G01 X8.25923 Y32.07559
G01 X8.27051 Y32.08885
G01 X8.31519 Y32.14264
G01 X8.33071 Y32.16202
G01 X8.37729 Y32.22232
G01 X8.41483 Y32.26375
G01 X8.46350 Y32.31242
G01 X8.50490 Y32.34993
G01 X8.54399 Y32.38013
G01 X8.58369 Y32.41318
G01 X8.62850 Y32.45336
G01 X8.63645 Y32.46040
G01 X8.67577 Y32.49466
G01 X8.75405 Y32.57307
G01 X8.81562 Y32.64358
G01 X8.86137 Y32.70050
G01 X8.86286 Y32.71473
G01 X8.86286 Y32.77592
G01 X8.86137 Y32.79014
G01 X8.86137 Y32.79017
G01 X8.81557 Y32.84716
G01 X8.75410 Y32.91755
G01 X8.67569 Y32.99606
G01 X8.63650 Y33.03022
G01 X8.62845 Y33.03733
G01 X8.58369 Y33.07746
G01 X8.54399 Y33.11051
G01 X8.50490 Y33.14071
G01 X8.46350 Y33.17823
G01 X8.41483 Y33.22689
G01 X8.37732 Y33.26832
G01 X8.31552 Y33.34828
G01 X8.27615 Y33.40482
G01 X8.27046 Y33.41386
G01 X8.26038 Y33.43322
G01 X8.20282 Y33.54345
G01 X8.18758 Y33.57447
G01 X8.17643 Y33.60716
G01 X8.13264 Y33.74660
G01 X8.13025 Y33.75704
G01 X8.11814 Y33.82489
G01 X8.10526 Y33.92509
G01 X8.10252 Y33.98092
G01 X8.10252 Y34.04973
G01 X8.10526 Y34.10558
G01 X8.11814 Y34.20578
G01 X8.13025 Y34.27363
G01 X8.13264 Y34.28404
G01 X8.17643 Y34.42349
G01 X8.18761 Y34.45620
G01 X8.20282 Y34.48719
G01 X8.27046 Y34.61676
G01 X8.27612 Y34.62582
G01 X8.31552 Y34.68236
G01 X8.37729 Y34.76232
G01 X8.41483 Y34.80375
G01 X8.46350 Y34.85242
G01 X8.50490 Y34.88993
G01 X8.54399 Y34.92013
G01 X8.58369 Y34.95318
G01 X8.62850 Y34.99336
G01 X8.63645 Y35.00040
G01 X8.67577 Y35.03466
G01 X8.75405 Y35.11307
G01 X8.81562 Y35.18358
G01 X8.86137 Y35.24050
G01 X8.86286 Y35.25473
G01 X8.86286 Y35.31592
G01 X8.86137 Y35.33014
G01 X8.86137 Y35.33017
G01 X8.81557 Y35.38716
G01 X8.75410 Y35.45755
G01 X8.67569 Y35.53606
G01 X8.63650 Y35.57022
G01 X8.62845 Y35.57733
G01 X8.58369 Y35.61746
G01 X8.54399 Y35.65051
G01 X8.50493 Y35.68069
G01 X8.46353 Y35.71823
G01 X8.43762 Y35.74297
G01 X8.41425 Y35.76641
G01 X8.36076 Y35.81495
G01 X8.33470 Y35.83634
G01 X8.33114 Y35.83723
G01 X8.31044 Y35.84274
G01 X8.29581 Y35.84685
G01 X8.22837 Y35.86235
G01 X8.20752 Y35.86608
G01 X8.16094 Y35.87609
G01 X8.12759 Y35.88442
G01 X8.09528 Y35.89600
G01 X8.03167 Y35.92232
G01 X8.00064 Y35.93702
G01 X7.97117 Y35.95468
G01 X7.96078 Y35.96103
G01 X7.91240 Y35.99118
G01 X7.88499 Y36.00824
G01 X7.85309 Y36.02701
G01 X7.82073 Y36.04495
G01 X7.71638 Y36.09351
G01 X7.65393 Y36.11757
G01 X7.58583 Y36.14101
G01 X7.55850 Y36.23052
G01 X7.50008 Y36.39384
G01 X7.47270 Y36.46011
G01 X7.40148 Y36.61068
G01 X7.37635 Y36.65777
G01 X7.29322 Y36.79643
G01 X7.27003 Y36.83120
G01 X7.17559 Y36.95853
G01 X7.15306 Y36.98599
G01 X7.12088 Y37.02150
G01 X7.10963 Y37.03456
G01 X7.06609 Y37.08762
G01 X7.05202 Y37.10596
G01 X7.04527 Y37.11538
G01 X7.03074 Y37.13430
G01 X7.00160 Y37.16981
G01 X6.97811 Y37.20151
G01 X6.93828 Y37.26115
G01 X6.93546 Y37.26542
G01 X6.91174 Y37.30179
G01 X6.90841 Y37.30679
G01 X6.86856 Y37.36648
G01 X6.85144 Y37.39351
G01 X6.81207 Y37.45922
G01 X6.76559 Y37.52854
G01 X6.69805 Y37.61959
G01 X6.77417 Y37.85561
G01 X6.78387 Y37.91680
G01 X6.79269 Y38.02785
G01 X6.79269 Y47.99768
G01 X6.79213 Y48.02526
G01 X6.79152 Y48.04078
G01 X6.77323 Y48.17573
G01 X6.76975 Y48.18056
G01 X6.73333 Y48.23070
G01 X6.66107 Y48.31538
G01 X6.50087 Y48.47555
G01 X6.49165 Y48.48462
G01 X6.48606 Y48.49001
G01 X6.38692 Y48.56969
G01 X6.33506 Y48.60436
G01 X6.07981 Y48.71914
G01 X6.05174 Y48.72707
G01 X6.01697 Y48.71868
G01 X5.92053 Y48.68452
G01 X5.83328 Y48.63105
G01 X5.75904 Y48.56064
G01 X5.71928 Y48.51414
G01 X5.67405 Y48.45188
G01 X5.66434 Y48.43334
G01 X5.55914 Y48.25112
G01 X5.45063 Y48.10969
G01 X5.29955 Y47.95864
G01 X5.28543 Y47.94139
G01 X5.28439 Y47.94233
G01 X5.27265 Y47.92948
G01 X5.26826 Y47.92349
G01 X5.24720 Y47.89483
G01 X5.23861 Y47.88437
G01 X5.23620 Y47.87987
G01 X5.21100 Y47.84553
G01 X5.16846 Y47.75044
G01 X5.14956 Y47.69224
G01 X5.13828 Y47.63913
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X6.05174 Y48.72707 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X6.05174 Y48.72707
G01 X5.76356 Y49.01525
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.43072 Y50.34809 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.43072 Y50.34809
G01 X4.07098 Y50.70778
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X1.29199 Y53.49007 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X1.29199 Y53.49007
G01 X1.19458 Y53.45842
G01 X1.10588 Y53.40722
G01 X1.05638 Y53.37125
G01 X1.02498 Y53.34298
G01 X0.98023 Y53.30267
G01 X0.92000 Y53.21979
G01 X0.87832 Y53.12617
G01 X0.85943 Y53.06798
G01 X0.84149 Y52.99325
G01 X0.83547 Y52.91662
G01 X0.83547 Y1.42452
G01 X0.84152 Y1.34781
G01 X0.84637 Y1.31720
G01 X0.87766 Y1.20633
G01 X0.93397 Y1.10582
G01 X0.96994 Y1.05635
G01 X1.03845 Y0.98027
G01 X1.12125 Y0.92013
G01 X1.21477 Y0.87847
G01 X1.27296 Y0.85955
G01 X1.34777 Y0.84156
G01 X1.42450 Y0.83552
G01 X100.83794 Y0.83552
G01 X100.91470 Y0.84156
G01 X100.94528 Y0.84641
G01 X101.05608 Y0.87771
G01 X101.15651 Y0.93394
G01 X101.20601 Y0.96991
G01 X101.26723 Y1.02500
G01 X101.28214 Y1.03844
G01 X101.34233 Y1.12127
G01 X101.38399 Y1.21482
G01 X101.38864 Y1.22907
G01 X101.40177 Y1.19300
G01 X101.44452 Y1.11893
G01 X101.49948 Y1.05345
G01 X101.52793 Y1.02500
G01 X101.55404 Y0.99892
G01 X101.61945 Y0.94405
G01 X101.69339 Y0.90138
G01 X101.77360 Y0.87220
G01 X101.84810 Y0.85223
G01 X101.97495 Y0.83552
G01 X162.60749 Y0.83552
G01 X162.73431 Y0.85223
G01 X162.80881 Y0.87220
G01 X162.88907 Y0.90141
G01 X162.96304 Y0.94410
G01 X163.02847 Y0.99899
G01 X163.08300 Y1.05353
G01 X163.13789 Y1.11896
G01 X163.18059 Y1.19292
G01 X163.20980 Y1.27319
G01 X163.22976 Y1.34768
G01 X163.24648 Y1.47451
G01 X163.24648 Y103.24250
G01 X163.22979 Y103.36932
G01 X163.20983 Y103.44385
G01 X163.18062 Y103.52411
G01 X163.13789 Y103.59808
G01 X163.08300 Y103.66353
G01 X163.05450 Y103.69201
G01 X163.02847 Y103.71807
G01 X162.96304 Y103.77295
G01 X162.88907 Y103.81565
G01 X162.80881 Y103.84486
G01 X162.73431 Y103.86483
G01 X162.60749 Y103.88154
G01 X138.49456 Y103.88154
G01 X138.39385 Y103.87107
G01 X138.33398 Y103.85850
G01 X138.22552 Y103.82208
G01 X138.12847 Y103.76150
G01 X138.06827 Y103.71332
G01 X138.04597 Y103.69201
G01 X138.00650 Y103.65434
G01 X137.95588 Y103.58550
G01 X137.91800 Y103.50892
G01 X137.88996 Y103.43707
G01 X137.88790 Y103.43000
G01 X137.89700 Y103.39759
G01 X137.92562 Y103.30237
G01 X137.96339 Y103.20036
G01 X137.98620 Y103.14921
G01 X137.99558 Y103.12724
G01 X138.01419 Y103.08169
G01 X138.03284 Y103.04001
G01 X138.08148 Y102.93986
G01 X138.10845 Y102.87656
G01 X138.12123 Y102.84197
G01 X138.15341 Y102.72632
G01 X138.16863 Y102.65896
G01 X138.16880 Y102.65787
G01 X138.18287 Y102.50278
G01 X138.18514 Y102.46833
G01 X138.18287 Y102.43387
G01 X138.16880 Y102.27877
G01 X138.16863 Y102.27768
G01 X138.15341 Y102.21035
G01 X138.12123 Y102.09470
G01 X138.10845 Y102.06008
G01 X138.08145 Y101.99681
G01 X138.04457 Y101.92084
G01 X138.00761 Y101.85846
G01 X137.96967 Y101.80100
G01 X137.94081 Y101.76168
G01 X137.86985 Y101.68005
G01 X137.82212 Y101.63031
G01 X137.81262 Y101.62135
G01 X137.70028 Y101.53153
G01 X137.66309 Y101.50379
G01 X137.64328 Y101.49272
G01 X137.50518 Y101.41845
G01 X137.49565 Y101.41342
G01 X137.44102 Y101.39323
G01 X137.31544 Y101.35264
G01 X137.29116 Y101.34695
G01 X137.22336 Y101.33455
G01 X137.12791 Y101.32188
G01 X137.06733 Y101.31891
G01 X136.99852 Y101.31891
G01 X136.93794 Y101.32188
G01 X136.84247 Y101.33455
G01 X136.79108 Y101.34332
G01 X136.77465 Y101.34695
G01 X136.75037 Y101.35264
G01 X136.69974 Y101.36900
G01 X136.62481 Y101.39323
G01 X136.57015 Y101.41345
G01 X136.56068 Y101.41843
G01 X136.54813 Y101.42518
G01 X136.42258 Y101.49272
G01 X136.40277 Y101.50379
G01 X136.36558 Y101.53153
G01 X136.25329 Y101.62130
G01 X136.24374 Y101.63031
G01 X136.23673 Y101.63704
G01 X136.19601 Y101.68005
G01 X136.12504 Y101.76168
G01 X136.09619 Y101.80100
G01 X136.05827 Y101.85840
G01 X136.02128 Y101.92084
G01 X135.98440 Y101.99676
G01 X135.96639 Y102.03699
G01 X135.95695 Y102.06003
G01 X135.95148 Y102.07298
G01 X135.93838 Y102.10323
G01 X135.88608 Y102.20242
G01 X135.87087 Y102.22673
G01 X135.84420 Y102.27248
G01 X135.82984 Y102.29892
G01 X135.75138 Y102.42091
G01 X135.74602 Y102.42808
G01 X135.74600 Y102.42808
G01 X135.72578 Y102.43697
G01 X135.64285 Y102.45716
G01 X135.56662 Y102.46882
G01 X135.48136 Y102.47433
G01 X135.39642 Y102.46493
G01 X135.31440 Y102.44093
G01 X135.27280 Y102.42467
G01 X135.26983 Y102.42058
G01 X135.24984 Y102.39419
G01 X135.17077 Y102.27275
G01 X135.13223 Y102.20222
G01 X135.12667 Y102.19188
G01 X135.09007 Y102.12239
G01 X135.06086 Y102.05995
G01 X135.05146 Y102.03699
G01 X135.03345 Y101.99678
G01 X134.99657 Y101.92084
G01 X134.95961 Y101.85846
G01 X134.92167 Y101.80100
G01 X134.89281 Y101.76168
G01 X134.82185 Y101.68005
G01 X134.81694 Y101.67446
G01 X134.79098 Y101.64527
G01 X134.77559 Y101.62851
G01 X134.76856 Y101.62107
G01 X134.70849 Y101.54893
G01 X134.70140 Y101.50522
G01 X134.69124 Y101.42810
G01 X134.68517 Y101.33585
G01 X134.68517 Y96.30132
G01 X134.68433 Y96.26687
G01 X134.68263 Y96.23261
G01 X134.67760 Y96.19860
G01 X134.67572 Y96.18669
G01 X134.66416 Y96.13116
G01 X134.65583 Y96.09779
G01 X134.64427 Y96.06550
G01 X134.61793 Y96.00190
G01 X134.60323 Y95.97084
G01 X134.58560 Y95.94140
G01 X134.54732 Y95.88412
G01 X134.52688 Y95.85656
G01 X134.50379 Y95.83109
G01 X134.48006 Y95.80619
G01 X134.40694 Y95.73304
G01 X134.40653 Y95.73266
G01 X134.39822 Y95.72433
G01 X132.70077 Y94.02687
G01 X132.65363 Y93.97478
G01 X132.61601 Y93.92878
G01 X132.52309 Y93.78402
G01 X132.40780 Y93.71095
G01 X132.34608 Y93.66360
G01 X132.27654 Y93.60264
G01 X130.26107 Y91.58718
G01 X130.23618 Y91.56345
G01 X130.21070 Y91.54037
G01 X130.18314 Y91.51992
G01 X130.12587 Y91.48164
G01 X130.09643 Y91.46401
G01 X130.06537 Y91.44933
G01 X130.00176 Y91.42299
G01 X129.96943 Y91.41144
G01 X129.93610 Y91.40308
G01 X129.86867 Y91.38964
G01 X129.83463 Y91.38461
G01 X129.80039 Y91.38291
G01 X129.76595 Y91.38207
G01 X125.05577 Y91.38207
G01 X125.00988 Y91.38057
G01 X124.97096 Y91.37801
G01 X124.85750 Y91.36147
G01 X124.83396 Y91.34410
G01 X124.77226 Y91.29675
G01 X124.70276 Y91.23584
G01 X123.37340 Y89.90651
G01 X123.34196 Y89.87293
G01 X123.31628 Y89.84362
G01 X123.24778 Y89.75175
G01 X123.24341 Y89.72284
G01 X123.23325 Y89.64573
G01 X123.22718 Y89.55348
G01 X123.22718 Y88.38878
G01 X123.22824 Y88.35015
G01 X123.23005 Y88.31736
G01 X123.25027 Y88.18307
G01 X123.25192 Y88.17639
G01 X123.29726 Y88.12064
G01 X123.31783 Y88.09646
G01 X123.35877 Y88.05035
G01 X123.36385 Y88.04461
G01 X123.43482 Y87.96298
G01 X123.46368 Y87.92363
G01 X123.50162 Y87.86620
G01 X123.53858 Y87.80380
G01 X123.57546 Y87.72785
G01 X123.60246 Y87.66453
G01 X123.61524 Y87.62996
G01 X123.62080 Y87.60994
G01 X123.64986 Y87.52617
G01 X123.65402 Y87.51624
G01 X123.67602 Y87.45645
G01 X123.67854 Y87.44858
G01 X123.74470 Y87.29750
G01 X123.76525 Y87.26077
G01 X123.79157 Y87.21048
G01 X123.80612 Y87.18084
G01 X123.81102 Y87.17223
G01 X123.81130 Y87.17174
G01 X123.87912 Y87.13697
G01 X123.96078 Y87.11180
G01 X124.04559 Y87.10118
G01 X124.12265 Y87.09831
G01 X124.20787 Y87.10255
G01 X124.29106 Y87.12155
G01 X124.36969 Y87.15467
G01 X124.43789 Y87.19069
G01 X124.54239 Y87.26481
G01 X124.63091 Y87.34695
G01 X124.63091 Y87.31373
G01 X124.59441 Y87.28378
G01 X124.52649 Y87.21586
G01 X124.42700 Y87.09463
G01 X124.37363 Y87.01475
G01 X124.29969 Y86.87644
G01 X124.26294 Y86.78770
G01 X124.21740 Y86.63763
G01 X124.19868 Y86.54342
G01 X124.18331 Y86.38734
G01 X124.18331 Y86.29128
G01 X124.19868 Y86.13522
G01 X124.21740 Y86.04101
G01 X124.26294 Y85.89092
G01 X124.29969 Y85.80218
G01 X124.37363 Y85.66387
G01 X124.42700 Y85.58401
G01 X124.52649 Y85.46278
G01 X124.59441 Y85.39486
G01 X124.71562 Y85.29537
G01 X124.79550 Y85.24200
G01 X124.93380 Y85.16806
G01 X125.02255 Y85.13131
G01 X125.08018 Y85.11384
G01 X125.17261 Y85.08579
G01 X125.26685 Y85.06705
G01 X125.42291 Y85.05168
G01 X125.51897 Y85.05168
G01 X125.67503 Y85.06705
G01 X125.76926 Y85.08579
G01 X125.91932 Y85.13131
G01 X126.00807 Y85.16806
G01 X126.14637 Y85.24200
G01 X126.22626 Y85.29537
G01 X126.34747 Y85.39486
G01 X126.41539 Y85.46278
G01 X126.49593 Y85.56090
G01 X126.51488 Y85.58401
G01 X126.56824 Y85.66387
G01 X126.64218 Y85.80218
G01 X126.67894 Y85.89092
G01 X126.72448 Y86.04101
G01 X126.74091 Y86.12374
G01 X126.74091 Y86.55475
G01 X126.72448 Y86.63763
G01 X126.67894 Y86.78770
G01 X126.64218 Y86.87644
G01 X126.56824 Y87.01475
G01 X126.51488 Y87.09463
G01 X126.41539 Y87.21586
G01 X126.34747 Y87.28378
G01 X126.31094 Y87.31375
G01 X126.31094 Y87.34695
G01 X126.43393 Y87.23286
G01 X126.45374 Y87.20799
G01 X126.54350 Y87.12102
G01 X126.58617 Y87.08912
G01 X126.60393 Y87.07586
G01 X126.67571 Y87.03131
G01 X126.75409 Y86.99973
G01 X126.83675 Y86.98211
G01 X126.89245 Y86.97517
G01 X126.91505 Y86.98688
G01 X126.94045 Y87.00045
G01 X127.02496 Y87.04703
G01 X127.12148 Y87.10903
G01 X127.16082 Y87.13842
G01 X127.18536 Y87.15600
G01 X127.21985 Y87.17964
G01 X127.26148 Y87.21048
G01 X127.34358 Y87.27611
G01 X127.38076 Y87.30387
G01 X127.40052 Y87.31490
G01 X127.53865 Y87.38919
G01 X127.54820 Y87.39425
G01 X127.60286 Y87.41447
G01 X127.72839 Y87.45503
G01 X127.75270 Y87.46072
G01 X127.82046 Y87.47311
G01 X127.91592 Y87.48576
G01 X127.97652 Y87.48874
G01 X128.04533 Y87.48874
G01 X128.10593 Y87.48576
G01 X128.20139 Y87.47311
G01 X128.26915 Y87.46072
G01 X128.29346 Y87.45503
G01 X128.41899 Y87.41447
G01 X128.47362 Y87.39425
G01 X128.48320 Y87.38919
G01 X128.62132 Y87.31490
G01 X128.64116 Y87.30380
G01 X128.67827 Y87.27611
G01 X128.79062 Y87.18632
G01 X128.80011 Y87.17733
G01 X128.84784 Y87.12760
G01 X128.91881 Y87.04596
G01 X128.94766 Y87.00664
G01 X128.98559 Y86.94924
G01 X129.02257 Y86.88681
G01 X129.05945 Y86.81089
G01 X129.08647 Y86.74751
G01 X129.09925 Y86.71294
G01 X129.13141 Y86.59727
G01 X129.14662 Y86.52996
G01 X129.14682 Y86.52887
G01 X129.15914 Y86.39288
G01 X129.16087 Y86.37378
G01 X129.16313 Y86.33936
G01 X129.16087 Y86.30487
G01 X129.14680 Y86.14977
G01 X129.14662 Y86.14868
G01 X129.13143 Y86.08140
G01 X129.09925 Y85.96570
G01 X129.08647 Y85.93116
G01 X129.05945 Y85.86776
G01 X129.02257 Y85.79184
G01 X128.98559 Y85.72940
G01 X128.94766 Y85.67200
G01 X128.91881 Y85.63268
G01 X128.84784 Y85.55105
G01 X128.80011 Y85.50131
G01 X128.79062 Y85.49235
G01 X128.73590 Y85.44861
G01 X128.69440 Y85.41272
G01 X128.68056 Y85.39976
G01 X128.66024 Y85.38148
G01 X128.62712 Y85.35277
G01 X128.54391 Y85.26880
G01 X128.51330 Y85.23309
G01 X128.48932 Y85.20619
G01 X128.44965 Y85.16339
G01 X128.40931 Y85.11208
G01 X128.40527 Y85.05811
G01 X128.41376 Y84.97314
G01 X128.42808 Y84.89735
G01 X128.45122 Y84.81506
G01 X128.48830 Y84.73804
G01 X128.53822 Y84.66865
G01 X128.58853 Y84.61020
G01 X128.68381 Y84.52506
G01 X128.82996 Y84.42539
G01 X128.97390 Y84.29184
G01 X129.01660 Y84.23832
G01 X128.98538 Y84.23832
G01 X128.95539 Y84.27485
G01 X128.88747 Y84.34277
G01 X128.76626 Y84.44226
G01 X128.68637 Y84.49562
G01 X128.54807 Y84.56956
G01 X128.45932 Y84.60632
G01 X128.33001 Y84.64554
G01 X128.30926 Y84.65183
G01 X128.21503 Y84.67058
G01 X128.05897 Y84.68595
G01 X127.96291 Y84.68595
G01 X127.80685 Y84.67058
G01 X127.71261 Y84.65183
G01 X127.56255 Y84.60632
G01 X127.47380 Y84.56956
G01 X127.33550 Y84.49562
G01 X127.25562 Y84.44226
G01 X127.13441 Y84.34277
G01 X127.06649 Y84.27485
G01 X126.98592 Y84.17670
G01 X126.96700 Y84.15361
G01 X126.91363 Y84.07376
G01 X126.83969 Y83.93545
G01 X126.80294 Y83.84671
G01 X126.75740 Y83.69662
G01 X126.74091 Y83.61376
G01 X126.74091 Y83.18275
G01 X126.72448 Y83.10000
G01 X126.67894 Y82.94993
G01 X126.64218 Y82.86119
G01 X126.56824 Y82.72288
G01 X126.51488 Y82.64300
G01 X126.49593 Y82.61989
G01 X126.41539 Y82.52177
G01 X126.34747 Y82.45385
G01 X126.22626 Y82.35435
G01 X126.14637 Y82.30099
G01 X126.00807 Y82.22707
G01 X125.91932 Y82.19032
G01 X125.89448 Y82.18278
G01 X125.74648 Y82.21986
G01 X125.66332 Y82.24498
G01 X125.49997 Y82.30343
G01 X125.44417 Y82.32646
G01 X125.29357 Y82.39769
G01 X125.25549 Y82.41801
G01 X125.11684 Y82.50112
G01 X125.08989 Y82.51912
G01 X124.96253 Y82.61356
G01 X124.94208 Y82.63032
G01 X124.82575 Y82.73579
G01 X124.80838 Y82.75313
G01 X124.70294 Y82.86947
G01 X124.68615 Y82.88994
G01 X124.59169 Y83.01729
G01 X124.57371 Y83.04424
G01 X124.49060 Y83.18290
G01 X124.47028 Y83.22098
G01 X124.39906 Y83.37157
G01 X124.37602 Y83.42738
G01 X124.31757 Y83.59070
G01 X124.29248 Y83.67381
G01 X124.25537 Y83.82192
G01 X123.71953 Y84.35775
G01 X123.73495 Y84.39491
G01 X123.78047 Y84.54500
G01 X123.79921 Y84.63921
G01 X123.81458 Y84.79529
G01 X123.81458 Y84.89133
G01 X123.79921 Y85.04741
G01 X123.78047 Y85.14162
G01 X123.73495 Y85.29171
G01 X123.69819 Y85.38043
G01 X123.62426 Y85.51876
G01 X123.57089 Y85.59862
G01 X123.47140 Y85.71985
G01 X123.40348 Y85.78777
G01 X123.38270 Y85.80482
G01 X123.28224 Y85.88727
G01 X123.20239 Y85.94063
G01 X123.06406 Y86.01457
G01 X122.97892 Y86.04983
G01 X122.40447 Y86.04983
G01 X122.33261 Y86.01581
G01 X122.26429 Y85.97937
G01 X122.12560 Y85.89626
G01 X122.07211 Y85.86057
G01 X121.94478 Y85.76613
G01 X121.90071 Y85.72999
G01 X121.78438 Y85.62453
G01 X121.74572 Y85.58587
G01 X121.64026 Y85.46954
G01 X121.60412 Y85.42547
G01 X121.50968 Y85.29814
G01 X121.47399 Y85.24465
G01 X121.39088 Y85.10596
G01 X121.35444 Y85.03764
G01 X121.28746 Y84.89606
G01 X121.28700 Y84.88671
G01 X121.28700 Y84.79992
G01 X121.29469 Y84.64310
G01 X121.30348 Y84.55417
G01 X121.32675 Y84.39733
G01 X121.33490 Y84.35633
G01 X121.33490 Y82.79027
G01 X121.32675 Y82.74932
G01 X121.30348 Y82.59248
G01 X121.29469 Y82.50353
G01 X121.28700 Y82.34671
G01 X121.28700 Y82.25992
G01 X121.29469 Y82.10310
G01 X121.30348 Y82.01417
G01 X121.30501 Y82.00386
G01 X121.38268 Y81.87429
G01 X121.42876 Y81.80526
G01 X121.52317 Y81.67793
G01 X121.57069 Y81.62001
G01 X121.67613 Y81.50366
G01 X121.72726 Y81.45253
G01 X121.84361 Y81.34709
G01 X121.90153 Y81.29957
G01 X122.02886 Y81.20516
G01 X122.09789 Y81.15908
G01 X122.23658 Y81.07595
G01 X122.31946 Y81.03173
G01 X122.32284 Y81.03104
G01 X122.47892 Y81.01567
G01 X122.57496 Y81.01567
G01 X122.73104 Y81.03104
G01 X122.82525 Y81.04978
G01 X122.97534 Y81.09530
G01 X123.06406 Y81.13206
G01 X123.11697 Y81.16035
G01 X125.19799 Y79.07933
G01 X125.78910 Y78.83450
G01 X125.81267 Y78.82538
G01 X125.88127 Y78.80082
G01 X125.92156 Y78.78857
G01 X125.99016 Y78.77143
G01 X126.02517 Y78.76442
G01 X126.09377 Y78.75423
G01 X126.12577 Y78.75108
G01 X126.19441 Y78.74771
G01 X126.20992 Y78.74733
G01 X127.98795 Y78.74733
G01 X128.00347 Y78.74694
G01 X128.07207 Y78.74359
G01 X128.10225 Y78.74070
G01 X128.10388 Y78.73971
G01 X128.16453 Y78.70336
G01 X128.18851 Y78.68736
G01 X128.24421 Y78.64603
G01 X128.26402 Y78.62980
G01 X128.31490 Y78.58365
G01 X128.32379 Y78.57519
G01 X129.27878 Y77.62020
G01 X129.28726 Y77.61134
G01 X129.33339 Y77.56043
G01 X129.34964 Y77.54062
G01 X129.39094 Y77.48492
G01 X129.39912 Y77.47329
G01 X129.40156 Y77.45932
G01 X129.41172 Y77.39071
G01 X129.41424 Y77.36524
G01 X129.41761 Y77.29660
G01 X129.41792 Y77.28434
G01 X129.41792 Y74.68330
G01 X129.41822 Y74.67101
G01 X129.42160 Y74.60240
G01 X129.42412 Y74.57695
G01 X129.43428 Y74.50834
G01 X129.43672 Y74.49437
G01 X129.44489 Y74.48274
G01 X129.48619 Y74.42704
G01 X129.50245 Y74.40723
G01 X129.54858 Y74.35633
G01 X129.55706 Y74.34746
G01 X132.85906 Y71.04546
G01 X132.86792 Y71.03700
G01 X132.91883 Y70.99085
G01 X132.93864 Y70.97460
G01 X132.99434 Y70.93329
G01 X133.01832 Y70.91729
G01 X133.07897 Y70.88095
G01 X133.10956 Y70.86464
G01 X133.17544 Y70.83347
G01 X133.19495 Y70.82484
G01 X133.87938 Y70.54132
G01 X134.22665 Y70.54132
G01 X134.44252 Y70.63253
G01 X134.51964 Y70.65321
G01 X134.66246 Y70.67701
G01 X134.70137 Y70.67957
G01 X134.74730 Y70.68107
G01 X145.51695 Y70.68107
G01 X145.55139 Y70.68191
G01 X145.58565 Y70.68361
G01 X145.61966 Y70.68864
G01 X145.68710 Y70.70208
G01 X145.72045 Y70.71044
G01 X145.75276 Y70.72199
G01 X145.81636 Y70.74831
G01 X145.84748 Y70.76304
G01 X145.87687 Y70.78064
G01 X145.93414 Y70.81892
G01 X145.96170 Y70.83937
G01 X145.98718 Y70.86245
G01 X146.01207 Y70.88615
G01 X147.16312 Y72.03720
G01 X147.23267 Y72.09816
G01 X147.29439 Y72.14551
G01 X147.39891 Y72.21290
G01 X147.45896 Y72.20550
G01 X147.47757 Y72.20296
G01 X147.55474 Y72.19153
G01 X147.65794 Y72.16840
G01 X147.66723 Y72.16558
G01 X147.67640 Y72.16273
G01 X147.76688 Y72.14007
G01 X147.83434 Y72.12664
G01 X147.92652 Y72.11297
G01 X148.14641 Y72.09494
G01 X148.18092 Y72.09296
G01 X148.21547 Y72.09494
G01 X148.43533 Y72.11297
G01 X148.52751 Y72.12664
G01 X148.59497 Y72.14007
G01 X148.68537 Y72.16271
G01 X148.89540 Y72.23019
G01 X148.92804 Y72.24157
G01 X148.95918 Y72.25661
G01 X149.15542 Y72.35742
G01 X149.23533 Y72.40530
G01 X149.29256 Y72.44355
G01 X149.36741 Y72.49905
G01 X149.53563 Y72.64177
G01 X149.56144 Y72.66479
G01 X149.58445 Y72.69059
G01 X149.72717 Y72.85882
G01 X149.78267 Y72.93367
G01 X149.82093 Y72.99090
G01 X149.86881 Y73.07081
G01 X149.96962 Y73.26705
G01 X149.98465 Y73.29819
G01 X149.99603 Y73.33083
G01 X150.06352 Y73.54086
G01 X150.08615 Y73.63126
G01 X150.09959 Y73.69872
G01 X150.11325 Y73.79090
G01 X150.13129 Y74.01078
G01 X150.13327 Y74.04530
G01 X150.13129 Y74.07985
G01 X150.11325 Y74.29971
G01 X150.09959 Y74.39189
G01 X150.08615 Y74.45935
G01 X150.06352 Y74.54975
G01 X149.99603 Y74.75978
G01 X149.98465 Y74.79244
G01 X149.96962 Y74.82356
G01 X149.88211 Y74.99392
G01 X149.86883 Y75.01982
G01 X149.82093 Y75.09973
G01 X149.78270 Y75.15693
G01 X149.72717 Y75.23179
G01 X149.58445 Y75.40001
G01 X149.56144 Y75.42582
G01 X149.53563 Y75.44883
G01 X149.36738 Y75.59158
G01 X149.34463 Y75.60844
G01 X149.29256 Y75.64708
G01 X149.23535 Y75.68530
G01 X149.15542 Y75.73321
G01 X148.95918 Y75.83400
G01 X148.92807 Y75.84903
G01 X148.89540 Y75.86041
G01 X148.68537 Y75.92790
G01 X148.59497 Y75.95053
G01 X148.52751 Y75.96397
G01 X148.43533 Y75.97763
G01 X148.21547 Y75.99567
G01 X148.18092 Y75.99765
G01 X148.14641 Y75.99567
G01 X147.92652 Y75.97763
G01 X147.83434 Y75.96397
G01 X147.76688 Y75.95053
G01 X147.67648 Y75.92790
G01 X147.55931 Y75.89026
G01 X147.46645 Y75.86041
G01 X147.43378 Y75.84903
G01 X147.40267 Y75.83400
G01 X147.20643 Y75.73321
G01 X147.12649 Y75.68530
G01 X147.06929 Y75.64708
G01 X146.99444 Y75.59155
G01 X146.82622 Y75.44883
G01 X146.80041 Y75.42582
G01 X146.77740 Y75.40001
G01 X146.63465 Y75.23179
G01 X146.57915 Y75.15693
G01 X146.54092 Y75.09973
G01 X146.49302 Y75.01980
G01 X146.39223 Y74.82356
G01 X146.37719 Y74.79247
G01 X146.36582 Y74.75978
G01 X146.35413 Y74.72346
G01 X146.29833 Y74.54977
G01 X146.27570 Y74.45935
G01 X146.26226 Y74.39189
G01 X146.24859 Y74.29971
G01 X146.23056 Y74.07985
G01 X146.22858 Y74.04530
G01 X146.23056 Y74.01078
G01 X146.24560 Y73.82752
G01 X146.24859 Y73.79092
G01 X146.26226 Y73.69872
G01 X146.27570 Y73.63126
G01 X146.29833 Y73.54086
G01 X146.32045 Y73.45193
G01 X146.33434 Y73.37553
G01 X146.34191 Y73.32356
G01 X146.34859 Y73.26329
G01 X146.30018 Y73.18660
G01 X146.25464 Y73.12308
G01 X146.18819 Y73.04327
G01 X146.18141 Y73.03624
G01 X146.17283 Y73.02750
G01 X145.37311 Y72.22781
G01 X145.30361 Y72.16690
G01 X145.24192 Y72.11955
G01 X145.21834 Y72.10218
G01 X145.10491 Y72.08564
G01 X145.06600 Y72.08308
G01 X145.02007 Y72.08158
G01 X143.01045 Y72.08158
G01 X142.91822 Y72.08765
G01 X142.84108 Y72.09781
G01 X142.63748 Y72.15336
G01 X142.56036 Y72.18531
G01 X142.54522 Y72.19174
G01 X142.16095 Y72.08831
G01 X138.96093 Y72.08831
G01 X138.57663 Y72.19174
G01 X138.56149 Y72.18531
G01 X138.48437 Y72.15336
G01 X138.28077 Y72.09781
G01 X138.20363 Y72.08765
G01 X138.11142 Y72.08158
G01 X133.69177 Y72.08158
G01 X133.59952 Y72.08765
G01 X133.52241 Y72.09781
G01 X133.49350 Y72.10218
G01 X133.40163 Y72.17068
G01 X133.37232 Y72.19636
G01 X133.33874 Y72.22781
G01 X132.24956 Y73.31698
G01 X132.18863 Y73.38653
G01 X132.14126 Y73.44825
G01 X132.03663 Y73.63144
G01 X132.00468 Y73.70860
G01 X131.98322 Y73.78096
G01 X131.97771 Y73.79961
G01 X131.99823 Y73.87619
G01 X132.02807 Y73.94022
G01 X131.83399 Y74.13430
G01 X131.78698 Y74.12968
G01 X131.69091 Y74.12968
G01 X131.62835 Y74.13583
G01 X131.53813 Y74.17850
G01 X131.45800 Y74.22127
G01 X131.31934 Y74.30438
G01 X131.25571 Y74.34685
G01 X131.12836 Y74.44129
G01 X131.07514 Y74.48495
G01 X130.95881 Y74.59039
G01 X130.91197 Y74.63722
G01 X130.80654 Y74.75358
G01 X130.76295 Y74.80672
G01 X130.66849 Y74.93405
G01 X130.63120 Y74.98914
G01 X130.62970 Y74.99892
G01 X130.60644 Y75.15577
G01 X130.59948 Y75.22633
G01 X130.59178 Y75.38315
G01 X130.59178 Y75.45150
G01 X130.59948 Y75.60834
G01 X130.60644 Y75.67893
G01 X130.62970 Y75.83572
G01 X130.64512 Y75.91309
G01 X130.68441 Y76.06991
G01 X130.71152 Y76.15904
G01 X130.73293 Y76.21883
G01 X130.79447 Y76.29386
G01 X130.86239 Y76.36178
G01 X130.98363 Y76.46127
G01 X131.06351 Y76.51464
G01 X131.15579 Y76.56397
G01 X131.20181 Y76.58855
G01 X131.29056 Y76.62531
G01 X131.44062 Y76.67085
G01 X131.53483 Y76.68957
G01 X131.69091 Y76.70496
G01 X131.78698 Y76.70496
G01 X131.83399 Y76.70031
G01 X132.07499 Y76.94131
G01 X131.83399 Y77.18230
G01 X131.78698 Y77.17768
G01 X131.69091 Y77.17768
G01 X131.53483 Y77.19305
G01 X131.44062 Y77.21179
G01 X131.29056 Y77.25731
G01 X131.20181 Y77.29406
G01 X131.06351 Y77.36800
G01 X130.98363 Y77.42137
G01 X130.86239 Y77.52086
G01 X130.79447 Y77.58878
G01 X130.73293 Y77.66376
G01 X130.72790 Y77.67781
G01 X130.71058 Y77.72284
G01 X130.71014 Y77.72388
G01 X130.68551 Y77.79041
G01 X130.67913 Y77.80991
G01 X130.65564 Y77.87334
G01 X130.62925 Y77.93701
G01 X130.62086 Y77.95657
G01 X130.59526 Y78.01431
G01 X130.58685 Y78.03394
G01 X130.56867 Y78.07791
G01 X130.53107 Y78.15723
G01 X130.52020 Y78.17760
G01 X130.49904 Y78.21972
G01 X130.47888 Y78.26246
G01 X130.47845 Y78.26335
G01 X130.46328 Y78.29541
G01 X129.32737 Y79.43132
G01 X128.73623 Y79.67618
G01 X128.71266 Y79.68527
G01 X128.64406 Y79.70983
G01 X128.60377 Y79.72208
G01 X128.53517 Y79.73925
G01 X128.50017 Y79.74623
G01 X128.43156 Y79.75644
G01 X128.39956 Y79.75959
G01 X128.33095 Y79.76297
G01 X128.31543 Y79.76333
G01 X126.61803 Y79.76333
G01 X126.60248 Y79.76371
G01 X126.53385 Y79.76708
G01 X126.50185 Y79.77023
G01 X126.43324 Y79.78042
G01 X126.42778 Y79.78126
G01 X126.40370 Y79.79762
G01 X126.34800 Y79.83892
G01 X126.32379 Y79.85878
G01 X126.27289 Y79.90493
G01 X126.26197 Y79.91532
G01 X123.51796 Y82.65936
G01 X123.50703 Y82.66975
G01 X123.45613 Y82.71587
G01 X123.43193 Y82.73574
G01 X123.37622 Y82.77704
G01 X123.36855 Y82.78257
G01 X123.33696 Y82.82517
G01 X123.31661 Y82.84996
G01 X123.21118 Y82.96632
G01 X123.18992 Y82.98758
G01 X123.07356 Y83.09301
G01 X123.04879 Y83.11336
G01 X122.92146 Y83.20777
G01 X122.88966 Y83.22900
G01 X122.75098 Y83.31211
G01 X122.70739 Y83.33538
G01 X122.55685 Y83.40660
G01 X122.49449 Y83.43236
G01 X122.33112 Y83.49078
G01 X122.24039 Y83.51818
G01 X122.16411 Y83.53728
G01 X122.07854 Y83.51132
G01 X121.98982 Y83.47457
G01 X121.85149 Y83.40063
G01 X121.77163 Y83.34727
G01 X121.65040 Y83.24777
G01 X121.58248 Y83.17985
G01 X121.48298 Y83.05862
G01 X121.42962 Y82.97876
G01 X121.35568 Y82.84043
G01 X121.33490 Y82.79027
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.16411 Y83.53728 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.16411 Y83.53728
G01 X122.05730 Y83.64412
G01 X121.98982 Y83.67206
G01 X121.85149 Y83.74599
G01 X121.77163 Y83.79936
G01 X121.65040 Y83.89885
G01 X121.58248 Y83.96677
G01 X121.48298 Y84.08801
G01 X121.42962 Y84.16786
G01 X121.35568 Y84.30619
G01 X121.33490 Y84.35633
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.65492 Y83.31729 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.65492 Y83.31729
G01 X119.65490 Y83.69532
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.31956 Y83.50632 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.31956 Y83.50632
G01 X119.39820 Y83.47376
G01 X119.54517 Y83.39520
G01 X119.62503 Y83.34183
G01 X119.65492 Y83.31729
G01 X119.71545 Y83.18935
G01 X119.74900 Y83.10853
G01 X119.80864 Y82.94191
G01 X119.82810 Y82.87787
G01 X119.86983 Y82.71125
G01 X119.88037 Y82.65839
G01 X119.90509 Y82.49177
G01 X119.90968 Y82.44521
G01 X119.91786 Y82.27859
G01 X119.91786 Y82.23406
G01 X119.90968 Y82.06744
G01 X119.90509 Y82.02088
G01 X119.88037 Y81.85425
G01 X119.86983 Y81.80140
G01 X119.83651 Y81.66830
G01 X119.82955 Y81.63721
G01 X119.82896 Y81.63431
G01 X119.81222 Y81.56779
G01 X119.81187 Y81.56655
G01 X119.79310 Y81.49129
G01 X119.77791 Y81.41499
G01 X119.77242 Y81.38489
G01 X119.76848 Y81.36104
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X118.07052 Y83.48818 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X118.07052 Y83.48818
G01 X118.11426 Y83.50632
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X118.07052 Y83.52440 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X118.07052 Y83.52440
G01 X118.11426 Y83.50632
G01 X119.31956 Y83.50632
G01 X119.39820 Y83.53888
G01 X119.54517 Y83.61742
G01 X119.62503 Y83.67079
G01 X119.65490 Y83.69532
G01 X119.71542 Y83.82324
G01 X119.74900 Y83.90411
G01 X119.80864 Y84.07073
G01 X119.82810 Y84.13477
G01 X119.86983 Y84.30139
G01 X119.88037 Y84.35427
G01 X119.90509 Y84.52090
G01 X119.90968 Y84.56746
G01 X119.91786 Y84.73405
G01 X119.91786 Y84.77858
G01 X119.90968 Y84.94520
G01 X119.90509 Y84.99176
G01 X119.88037 Y85.15839
G01 X119.86983 Y85.21130
G01 X119.86658 Y85.22433
G01 X119.86028 Y85.25237
G01 X119.84628 Y85.32270
G01 X119.83719 Y85.38275
G01 X119.83661 Y85.38816
G01 X119.82617 Y85.45630
G01 X119.82475 Y85.46347
G01 X119.81197 Y85.55046
G01 X119.80387 Y85.63255
G01 X119.80211 Y85.65214
G01 X119.79902 Y85.69052
G01 X119.79899 Y85.69097
G01 X119.75383 Y85.73614
G01 X119.62503 Y85.84182
G01 X119.54517 Y85.89522
G01 X119.49945 Y85.91962
G01 X119.48964 Y85.92158
G01 X119.44194 Y85.93230
G01 X119.38383 Y85.94685
G01 X119.29543 Y85.96448
G01 X119.12881 Y85.98920
G01 X119.04786 Y85.99717
G01 X118.88124 Y86.00535
G01 X118.84194 Y86.00632
G01 X118.59193 Y86.00632
G01 X118.55261 Y86.00535
G01 X118.38599 Y85.99717
G01 X118.30504 Y85.98920
G01 X118.13841 Y85.96448
G01 X118.05002 Y85.94685
G01 X117.99193 Y85.93230
G01 X117.94421 Y85.92158
G01 X117.93433 Y85.91962
G01 X117.89653 Y85.92333
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X117.89882 Y85.90060 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X117.89882 Y85.90060
G01 X117.93433 Y85.91962
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.49945 Y85.91962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.49945 Y85.91962
G01 X119.53874 Y85.92349
G01 X119.63295 Y85.94221
G01 X119.67984 Y85.95643
G01 X119.76859 Y85.99321
G01 X119.81182 Y86.01630
G01 X119.89167 Y86.06966
G01 X119.92957 Y86.10075
G01 X119.99749 Y86.16867
G01 X120.02858 Y86.20657
G01 X120.08195 Y86.28643
G01 X120.10506 Y86.32966
G01 X120.14181 Y86.41840
G01 X120.15469 Y86.46090
G01 X120.15368 Y86.46362
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X119.79902 Y85.69052 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X119.79902 Y85.69052
G01 X119.82515 Y85.72961
G01 X119.86866 Y85.78264
G01 X119.90097 Y85.81828
G01 X120.43358 Y86.35089
G01 X120.50287 Y86.36926
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X122.97892 Y86.04983 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X122.97892 Y86.04983
G01 X123.06406 Y86.08506
G01 X123.20239 Y86.15899
G01 X123.28224 Y86.21236
G01 X123.40348 Y86.31185
G01 X123.47140 Y86.37977
G01 X123.57089 Y86.50101
G01 X123.62426 Y86.58086
G01 X123.69819 Y86.71919
G01 X123.73495 Y86.80791
G01 X123.73838 Y86.81927
G01 X123.78047 Y86.95800
G01 X123.79921 Y87.05221
G01 X123.81102 Y87.17223
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.74091 Y86.12374 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.74091 Y86.12374
G01 X126.75740 Y86.04101
G01 X126.80294 Y85.89092
G01 X126.83969 Y85.80218
G01 X126.91363 Y85.66387
G01 X126.96700 Y85.58401
G01 X127.06649 Y85.46278
G01 X127.13441 Y85.39486
G01 X127.25562 Y85.29537
G01 X127.33550 Y85.24200
G01 X127.47380 Y85.16806
G01 X127.56255 Y85.13131
G01 X127.62018 Y85.11384
G01 X127.71261 Y85.08579
G01 X127.80685 Y85.06705
G01 X127.96291 Y85.05168
G01 X128.05897 Y85.05168
G01 X128.21503 Y85.06705
G01 X128.30926 Y85.08579
G01 X128.41350 Y85.11742
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.74091 Y86.55475 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.74091 Y86.55475
G01 X126.75740 Y86.63763
G01 X126.80294 Y86.78770
G01 X126.83969 Y86.87644
G01 X126.89245 Y86.97517
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X131.15332 Y83.12832 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X131.15332 Y83.12832
G01 X131.25480 Y83.18255
G01 X131.34354 Y83.21933
G01 X131.49363 Y83.26484
G01 X131.57636 Y83.28133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.80176 Y81.19045 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.80176 Y81.19045
G01 X130.84748 Y81.13477
G01 X130.87093 Y81.11130
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.74682 Y81.11130 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.74682 Y81.11130
G01 X130.87093 Y81.11130
G01 X130.93130 Y81.08623
G01 X131.08812 Y81.03012
G01 X131.16592 Y81.00648
G01 X131.32274 Y80.96718
G01 X131.38924 Y80.95392
G01 X131.54608 Y80.93068
G01 X131.60608 Y80.92474
G01 X131.76290 Y80.91704
G01 X131.79193 Y80.91631
G01 X132.59190 Y80.91631
G01 X132.62094 Y80.91704
G01 X132.77778 Y80.92474
G01 X132.83780 Y80.93068
G01 X132.99459 Y80.95392
G01 X133.06107 Y80.96718
G01 X133.21789 Y81.00645
G01 X133.29576 Y81.03015
G01 X133.45258 Y81.08626
G01 X133.51288 Y81.11130
G01 X133.53640 Y81.13477
G01 X133.63589 Y81.25601
G01 X133.68926 Y81.33586
G01 X133.76317 Y81.47419
G01 X133.79995 Y81.56292
G01 X133.84547 Y81.71300
G01 X133.86421 Y81.80721
G01 X133.87958 Y81.96330
G01 X133.87958 Y82.05933
G01 X133.86421 Y82.21542
G01 X133.84547 Y82.30962
G01 X133.79995 Y82.45969
G01 X133.76317 Y82.54844
G01 X133.76099 Y82.55255
G01 X137.62689 Y86.41846
G01 X137.65918 Y86.45409
G01 X137.70271 Y86.50713
G01 X137.75105 Y86.57944
G01 X137.75608 Y86.58698
G01 X137.78844 Y86.64749
G01 X137.82519 Y86.73623
G01 X137.84511 Y86.80189
G01 X137.86385 Y86.89610
G01 X137.87056 Y86.96440
G01 X137.87292 Y87.01241
G01 X137.87292 Y90.26394
G01 X137.78171 Y90.47981
G01 X137.76103 Y90.55693
G01 X137.73723 Y90.69975
G01 X137.73467 Y90.73867
G01 X137.73317 Y90.78456
G01 X137.73317 Y91.17588
G01 X137.73924 Y91.26810
G01 X137.74940 Y91.34522
G01 X137.75649 Y91.38893
G01 X137.81656 Y91.46107
G01 X137.82359 Y91.46851
G01 X137.83898 Y91.48527
G01 X137.86484 Y91.51436
G01 X137.86985 Y91.52005
G01 X137.92882 Y91.58789
G01 X137.94079 Y91.60166
G01 X137.96967 Y91.64100
G01 X138.00761 Y91.69846
G01 X138.04457 Y91.76084
G01 X138.08145 Y91.83681
G01 X138.10845 Y91.90008
G01 X138.12123 Y91.93470
G01 X138.15341 Y92.05035
G01 X138.16863 Y92.11768
G01 X138.16880 Y92.11877
G01 X138.18287 Y92.27387
G01 X138.18514 Y92.30833
G01 X138.18287 Y92.34278
G01 X138.16880 Y92.49787
G01 X138.16863 Y92.49896
G01 X138.15341 Y92.56632
G01 X138.12123 Y92.68194
G01 X138.10845 Y92.71656
G01 X138.08145 Y92.77983
G01 X138.04457 Y92.85581
G01 X138.00761 Y92.91819
G01 X137.96967 Y92.97564
G01 X137.94081 Y93.01496
G01 X137.86985 Y93.09660
G01 X137.82212 Y93.14633
G01 X137.81262 Y93.15530
G01 X137.70028 Y93.24511
G01 X137.66309 Y93.27287
G01 X137.64333 Y93.28390
G01 X137.50520 Y93.35819
G01 X137.49563 Y93.36325
G01 X137.44097 Y93.38347
G01 X137.31544 Y93.42403
G01 X137.29111 Y93.42972
G01 X137.22336 Y93.44211
G01 X137.12794 Y93.45476
G01 X137.06733 Y93.45774
G01 X136.99852 Y93.45774
G01 X136.93792 Y93.45476
G01 X136.84247 Y93.44211
G01 X136.77470 Y93.42972
G01 X136.75039 Y93.42403
G01 X136.62486 Y93.38347
G01 X136.57020 Y93.36325
G01 X136.56065 Y93.35819
G01 X136.42253 Y93.28390
G01 X136.40277 Y93.27285
G01 X136.36558 Y93.24511
G01 X136.25321 Y93.15530
G01 X136.24374 Y93.14636
G01 X136.19601 Y93.09660
G01 X136.12504 Y93.01496
G01 X136.09619 Y92.97564
G01 X136.05827 Y92.91824
G01 X136.02126 Y92.85581
G01 X135.98440 Y92.77989
G01 X135.96639 Y92.73965
G01 X135.95695 Y92.71664
G01 X135.92784 Y92.65436
G01 X135.89121 Y92.58484
G01 X135.88562 Y92.57440
G01 X135.84709 Y92.50391
G01 X135.76792 Y92.38230
G01 X135.74801 Y92.35606
G01 X135.74529 Y92.35228
G01 X135.74508 Y92.35197
G01 X135.70330 Y92.33569
G01 X135.62139 Y92.31174
G01 X135.53658 Y92.30234
G01 X135.45141 Y92.30783
G01 X135.37516 Y92.31946
G01 X135.29213 Y92.33965
G01 X135.27183 Y92.34857
G01 X135.26647 Y92.35573
G01 X135.18796 Y92.47783
G01 X135.17366 Y92.50419
G01 X135.14697 Y92.54999
G01 X135.13173 Y92.57432
G01 X135.07943 Y92.67354
G01 X135.06629 Y92.70381
G01 X135.06086 Y92.71669
G01 X135.05146 Y92.73965
G01 X135.03348 Y92.77986
G01 X134.99657 Y92.85581
G01 X134.95961 Y92.91819
G01 X134.92167 Y92.97564
G01 X134.89281 Y93.01496
G01 X134.82185 Y93.09660
G01 X134.77412 Y93.14633
G01 X134.76462 Y93.15530
G01 X134.65228 Y93.24511
G01 X134.61509 Y93.27287
G01 X134.59533 Y93.28390
G01 X134.45720 Y93.35819
G01 X134.44763 Y93.36325
G01 X134.39297 Y93.38347
G01 X134.26744 Y93.42403
G01 X134.24311 Y93.42972
G01 X134.17536 Y93.44211
G01 X134.07994 Y93.45476
G01 X134.01933 Y93.45774
G01 X133.95052 Y93.45774
G01 X133.88992 Y93.45476
G01 X133.79447 Y93.44211
G01 X133.72670 Y93.42972
G01 X133.70239 Y93.42403
G01 X133.57686 Y93.38347
G01 X133.52220 Y93.36325
G01 X133.51265 Y93.35819
G01 X133.37453 Y93.28390
G01 X133.35403 Y93.27244
G01 X133.31621 Y93.24679
G01 X133.28464 Y93.22657
G01 X133.21794 Y93.18626
G01 X133.18040 Y93.16503
G01 X133.15263 Y93.15034
G01 X133.13160 Y93.11006
G01 X133.10488 Y93.06310
G01 X133.07994 Y93.02271
G01 X133.04842 Y92.97595
G01 X133.04819 Y92.97564
G01 X133.01027 Y92.91824
G01 X132.97326 Y92.85581
G01 X132.93640 Y92.77989
G01 X132.90938 Y92.71651
G01 X132.89660 Y92.68194
G01 X132.86442 Y92.56627
G01 X132.84923 Y92.49896
G01 X132.84905 Y92.49789
G01 X132.83498 Y92.34278
G01 X132.83272 Y92.30833
G01 X132.83498 Y92.27387
G01 X132.84905 Y92.11877
G01 X132.84923 Y92.11771
G01 X132.86442 Y92.05040
G01 X132.87196 Y92.02332
G01 X132.89660 Y91.93468
G01 X132.90938 Y91.90013
G01 X132.93640 Y91.83676
G01 X132.97326 Y91.76084
G01 X133.01027 Y91.69840
G01 X133.04819 Y91.64100
G01 X133.08591 Y91.58959
G01 X133.09033 Y91.58380
G01 X133.12810 Y91.52916
G01 X133.13902 Y91.51268
G01 X133.15931 Y91.48360
G01 X133.18167 Y91.45314
G01 X133.26632 Y91.30907
G01 X133.27272 Y91.29533
G01 X133.31309 Y91.21766
G01 X133.31377 Y91.21644
G01 X133.31870 Y91.20608
G01 X133.44781 Y91.13706
G01 X133.53655 Y91.10031
G01 X133.68662 Y91.05479
G01 X133.78083 Y91.03605
G01 X133.93691 Y91.02068
G01 X134.03297 Y91.02068
G01 X134.18903 Y91.03605
G01 X134.28324 Y91.05479
G01 X134.43333 Y91.10031
G01 X134.52207 Y91.13706
G01 X134.66038 Y91.21100
G01 X134.74024 Y91.26437
G01 X134.86147 Y91.36386
G01 X134.92939 Y91.43178
G01 X135.02888 Y91.55301
G01 X135.08225 Y91.63287
G01 X135.15619 Y91.77118
G01 X135.19294 Y91.85992
G01 X135.23366 Y91.99414
G01 X135.23846 Y92.01001
G01 X135.25720 Y92.10422
G01 X135.27257 Y92.26028
G01 X135.27257 Y92.34755
G01 X135.26647 Y92.35573
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X133.21146 Y90.92132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X133.21146 Y90.92132
G01 X133.24481 Y90.97392
G01 X133.28413 Y91.04982
G01 X133.30963 Y91.13140
G01 X133.31916 Y91.20511
G01 X133.31377 Y91.21644
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X133.15263 Y93.15034 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X133.15263 Y93.15034
G01 X133.08901 Y93.21105
G01 X133.04113 Y93.26066
G01 X133.01682 Y93.28816
G01 X132.97247 Y93.33333
G01 X132.92546 Y93.37590
G01 X132.89787 Y93.40379
G01 X132.87140 Y93.43376
G01 X132.84435 Y93.46089
G01 X132.81238 Y93.48918
G01 X132.78372 Y93.51793
G01 X132.75723 Y93.54793
G01 X132.72767 Y93.57798
G01 X132.66813 Y93.63254
G01 X132.61205 Y93.68997
G01 X132.59101 Y93.71379
G01 X132.52934 Y93.77800
G01 X132.52309 Y93.78402
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X135.74529 Y92.35228 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X135.74529 Y92.35228
G01 X135.74529 Y92.26028
G01 X135.76068 Y92.10422
G01 X135.77940 Y92.01001
G01 X135.82494 Y91.85992
G01 X135.86170 Y91.77118
G01 X135.93561 Y91.63287
G01 X135.98898 Y91.55301
G01 X136.08847 Y91.43178
G01 X136.15639 Y91.36386
G01 X136.19294 Y91.33386
G01 X136.19294 Y87.36036
G01 X133.80745 Y84.97490
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X138.49093 Y81.11130 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X138.49093 Y81.11130
G01 X138.46748 Y81.13477
G01 X138.36799 Y81.25601
G01 X138.31462 Y81.33586
G01 X138.24069 Y81.47419
G01 X138.21920 Y81.52609
G01 X138.20393 Y81.56292
G01 X138.15841 Y81.71300
G01 X138.13967 Y81.80721
G01 X138.12430 Y81.96330
G01 X138.12430 Y82.05933
G01 X138.13967 Y82.21542
G01 X138.15841 Y82.30962
G01 X138.20393 Y82.45969
G01 X138.24069 Y82.54844
G01 X138.31462 Y82.68676
G01 X138.36799 Y82.76662
G01 X138.46748 Y82.88786
G01 X138.53540 Y82.95578
G01 X138.65664 Y83.05527
G01 X138.73649 Y83.10863
G01 X138.87480 Y83.18255
G01 X138.96354 Y83.21933
G01 X139.11363 Y83.26484
G01 X139.19636 Y83.28133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.42737 Y83.28133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.42737 Y83.28133
G01 X140.51025 Y83.29779
G01 X140.66031 Y83.34330
G01 X140.74906 Y83.38006
G01 X140.88737 Y83.45400
G01 X140.96725 Y83.50736
G01 X141.08848 Y83.60685
G01 X141.15640 Y83.67477
G01 X141.25589 Y83.79601
G01 X141.28234 Y83.83558
G01 X141.30926 Y83.87586
G01 X141.38317 Y84.01419
G01 X141.41995 Y84.10292
G01 X141.46547 Y84.25300
G01 X141.48421 Y84.34721
G01 X141.49958 Y84.50330
G01 X141.49958 Y84.59933
G01 X141.48421 Y84.75542
G01 X141.46547 Y84.84962
G01 X141.41995 Y84.99969
G01 X141.38317 Y85.08844
G01 X141.30926 Y85.22676
G01 X141.25589 Y85.30662
G01 X141.15640 Y85.42786
G01 X141.08848 Y85.49578
G01 X140.96725 Y85.59527
G01 X140.88737 Y85.64863
G01 X140.74906 Y85.72255
G01 X140.66031 Y85.75933
G01 X140.51025 Y85.80484
G01 X140.42737 Y85.82133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X139.19636 Y85.82133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X139.19636 Y85.82133
G01 X139.11363 Y85.83779
G01 X138.96354 Y85.88330
G01 X138.87480 Y85.92006
G01 X138.73649 Y85.99400
G01 X138.65664 Y86.04736
G01 X138.53540 Y86.14685
G01 X138.46748 Y86.21477
G01 X138.36799 Y86.33601
G01 X138.31462 Y86.41586
G01 X138.24069 Y86.55419
G01 X138.20393 Y86.64292
G01 X138.15841 Y86.79300
G01 X138.13967 Y86.88721
G01 X138.12430 Y87.04330
G01 X138.12430 Y87.13933
G01 X138.13967 Y87.29542
G01 X138.15841 Y87.38962
G01 X138.20393 Y87.53969
G01 X138.24069 Y87.62844
G01 X138.31462 Y87.76676
G01 X138.36799 Y87.84662
G01 X138.46748 Y87.96786
G01 X138.53540 Y88.03578
G01 X138.65664 Y88.13527
G01 X138.73649 Y88.18863
G01 X138.87480 Y88.26255
G01 X138.96354 Y88.29933
G01 X139.11363 Y88.34484
G01 X139.19636 Y88.36133
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X137.87292 Y90.26394 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X137.87292 Y90.26394
G01 X137.87454 Y90.26010
G01 X137.88199 Y90.25490
G01 X137.94879 Y90.21631
G01 X138.02623 Y90.18020
G01 X138.10876 Y90.15807
G01 X138.19387 Y90.15063
G01 X138.23246 Y90.15063
G01 X138.23360 Y90.15137
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.63751 Y88.30623 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.63751 Y88.30623
G01 X140.63210 Y88.38543
G01 X140.63527 Y88.41594
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X140.42737 Y88.36133 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X140.42737 Y88.36133
G01 X140.51025 Y88.37779
G01 X140.63507 Y88.41566
G01 X140.63527 Y88.41594
G01 X140.63530 Y88.41596
G01 X140.65490 Y88.44103
G01 X140.71901 Y88.51614
G01 X140.72905 Y88.52770
G01 X140.78350 Y88.58942
G01 X140.83118 Y88.63900
G01 X140.88376 Y88.68914
G01 X140.89704 Y88.70151
G01 X140.93164 Y88.73285
G01 X140.95468 Y88.75287
G01 X141.00034 Y88.79424
G01 X141.04901 Y88.84291
G01 X141.08655 Y88.88434
G01 X141.14832 Y88.96427
G01 X141.18769 Y89.02081
G01 X141.19341 Y89.02988
G01 X141.26102 Y89.15945
G01 X141.27626 Y89.19048
G01 X141.28742 Y89.22315
G01 X141.33123 Y89.36262
G01 X141.33362 Y89.37303
G01 X141.34573 Y89.44088
G01 X141.35859 Y89.54106
G01 X141.36133 Y89.59691
G01 X141.36133 Y89.66572
G01 X141.35859 Y89.72160
G01 X141.34573 Y89.82178
G01 X141.33362 Y89.88965
G01 X141.33123 Y89.90003
G01 X141.28742 Y90.03948
G01 X141.27626 Y90.07217
G01 X141.26105 Y90.10316
G01 X141.19341 Y90.23277
G01 X141.18772 Y90.24182
G01 X141.14832 Y90.29838
G01 X141.08655 Y90.37832
G01 X141.04901 Y90.41974
G01 X141.00032 Y90.46843
G01 X140.95892 Y90.50595
G01 X140.87896 Y90.56772
G01 X140.82242 Y90.60712
G01 X140.81338 Y90.61281
G01 X140.68376 Y90.68045
G01 X140.65277 Y90.69566
G01 X140.62008 Y90.70681
G01 X140.48064 Y90.75063
G01 X140.47025 Y90.75302
G01 X140.40238 Y90.76513
G01 X140.30220 Y90.77798
G01 X140.24632 Y90.78073
G01 X140.21190 Y90.78157
G01 X139.41190 Y90.78157
G01 X139.37751 Y90.78073
G01 X139.32166 Y90.77798
G01 X139.22148 Y90.76513
G01 X139.15364 Y90.75302
G01 X139.14320 Y90.75063
G01 X139.00375 Y90.70681
G01 X138.97106 Y90.69566
G01 X138.94005 Y90.68042
G01 X138.81048 Y90.61281
G01 X138.80142 Y90.60712
G01 X138.74493 Y90.56775
G01 X138.66492 Y90.50595
G01 X138.62354 Y90.46846
G01 X138.58559 Y90.43135
G01 X138.57470 Y90.41987
G01 X138.51838 Y90.36663
G01 X138.45862 Y90.31591
G01 X138.45643 Y90.31403
G01 X138.39603 Y90.26318
G01 X138.27099 Y90.17451
G01 X138.25130 Y90.16269
G01 X138.23362 Y90.15139
G01 X138.23360 Y90.15137
G01 X138.20393 Y90.07969
G01 X138.15841 Y89.92962
G01 X138.13967 Y89.83542
G01 X138.12430 Y89.67933
G01 X138.12430 Y89.58330
G01 X138.13967 Y89.42721
G01 X138.15841 Y89.33300
G01 X138.20393 Y89.18292
G01 X138.24069 Y89.09419
G01 X138.31462 Y88.95586
G01 X138.36799 Y88.87601
G01 X138.46748 Y88.75477
G01 X138.53540 Y88.68685
G01 X138.65664 Y88.58736
G01 X138.73649 Y88.53400
G01 X138.87480 Y88.46006
G01 X138.96354 Y88.42330
G01 X139.11363 Y88.37779
G01 X139.19636 Y88.36133
G01 X139.36555 Y88.36133
G01 X139.41190 Y88.36130
G01 X140.25818 Y88.36130
G01 X140.42737 Y88.36133
G01 X140.51025 Y88.34484
G01 X140.63751 Y88.30623
G01 X140.64190 Y88.30085
G01 X140.65587 Y88.28480
G01 X140.69915 Y88.23181
G01 X140.71884 Y88.20603
G01 X140.83166 Y88.08439
G01 X140.84866 Y88.06948
G01 X140.88513 Y88.03522
G01 X140.90464 Y88.01558
G01 X140.95468 Y87.96979
G01 X141.00032 Y87.92843
G01 X141.04901 Y87.87974
G01 X141.08655 Y87.83832
G01 X141.14832 Y87.75838
G01 X141.18772 Y87.70182
G01 X141.19341 Y87.69277
G01 X141.26105 Y87.56316
G01 X141.27626 Y87.53217
G01 X141.28742 Y87.49948
G01 X141.33123 Y87.36003
G01 X141.33362 Y87.34964
G01 X141.34573 Y87.28178
G01 X141.35859 Y87.18160
G01 X141.36133 Y87.12572
G01 X141.36133 Y87.05691
G01 X141.35859 Y87.00106
G01 X141.34573 Y86.90088
G01 X141.34469 Y86.89311
G01 X141.33618 Y86.83225
G01 X141.33456 Y86.81970
G01 X141.32694 Y86.75727
G01 X141.32138 Y86.67286
G01 X141.32038 Y86.58770
G01 X141.32044 Y86.56049
G01 X141.32188 Y86.47223
G01 X141.32318 Y86.44360
G01 X141.32325 Y86.44208
G01 X141.30926 Y86.41586
G01 X141.25589 Y86.33601
G01 X141.15640 Y86.21477
G01 X141.08848 Y86.14685
G01 X140.96725 Y86.04736
G01 X140.88737 Y85.99400
G01 X140.74906 Y85.92006
G01 X140.66031 Y85.88330
G01 X140.51025 Y85.83779
G01 X140.42737 Y85.82133
G01 X139.19636 Y85.82133
G01 X139.11363 Y85.80484
G01 X138.96354 Y85.75933
G01 X138.87480 Y85.72255
G01 X138.73649 Y85.64863
G01 X138.65664 Y85.59527
G01 X138.53540 Y85.49578
G01 X138.46748 Y85.42786
G01 X138.36799 Y85.30662
G01 X138.31462 Y85.22676
G01 X138.24069 Y85.08844
G01 X138.20393 Y84.99969
G01 X138.15841 Y84.84962
G01 X138.13967 Y84.75542
G01 X138.12430 Y84.59933
G01 X138.12430 Y84.50330
G01 X138.13967 Y84.34721
G01 X138.15841 Y84.25300
G01 X138.20393 Y84.10292
G01 X138.24069 Y84.01419
G01 X138.31462 Y83.87586
G01 X138.36799 Y83.79601
G01 X138.46748 Y83.67477
G01 X138.53540 Y83.60685
G01 X138.65664 Y83.50736
G01 X138.73649 Y83.45400
G01 X138.87480 Y83.38006
G01 X138.96354 Y83.34330
G01 X139.11363 Y83.29779
G01 X139.19636 Y83.28133
G01 X139.36555 Y83.28133
G01 X139.41190 Y83.28130
G01 X140.25818 Y83.28130
G01 X140.42737 Y83.28133
G01 X140.51025 Y83.26484
G01 X140.66031 Y83.21933
G01 X140.74906 Y83.18255
G01 X140.88737 Y83.10863
G01 X140.96725 Y83.05527
G01 X141.08848 Y82.95578
G01 X141.15640 Y82.88786
G01 X141.25589 Y82.76662
G01 X141.30926 Y82.68676
G01 X141.38317 Y82.54844
G01 X141.41995 Y82.45969
G01 X141.46547 Y82.30962
G01 X141.48421 Y82.21542
G01 X141.49958 Y82.05933
G01 X141.49953 Y82.01686
G01 X141.47830 Y81.96538
G01 X141.40707 Y81.81483
G01 X141.36847 Y81.74247
G01 X141.28536 Y81.60378
G01 X141.24731 Y81.54679
G01 X141.15285 Y81.41943
G01 X141.11419 Y81.37229
G01 X141.00873 Y81.25596
G01 X140.96730 Y81.21453
G01 X140.85097 Y81.10907
G01 X140.80375 Y81.07036
G01 X140.67639 Y80.97590
G01 X140.65610 Y80.96142
G01 X140.61459 Y80.95392
G01 X140.45780 Y80.93068
G01 X140.39778 Y80.92474
G01 X140.24094 Y80.91704
G01 X140.21190 Y80.91631
G01 X139.41190 Y80.91631
G01 X139.38290 Y80.91704
G01 X139.22608 Y80.92474
G01 X139.16608 Y80.93068
G01 X139.00924 Y80.95392
G01 X138.94274 Y80.96718
G01 X138.78592 Y81.00648
G01 X138.70812 Y81.03012
G01 X138.55130 Y81.08623
G01 X138.49093 Y81.11130
G01 X133.51288 Y81.11130
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X133.08532 Y79.43132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X133.08532 Y79.43132
G01 X132.58921 Y79.43132
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.88860 Y79.43132 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.88860 Y79.43132
G01 X130.86239 Y79.40978
G01 X130.79447 Y79.34189
G01 X130.69498 Y79.22063
G01 X130.64162 Y79.14075
G01 X130.56770 Y79.00247
G01 X130.53092 Y78.91370
G01 X130.51101 Y78.84801
G01 X130.48540 Y78.76363
G01 X130.46666 Y78.66942
G01 X130.45129 Y78.51337
G01 X130.45129 Y78.41728
G01 X130.46328 Y78.29541
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X130.73293 Y77.66376 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X130.73293 Y77.66376
G01 X130.73293 Y76.21883
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X128.10294 Y74.64863 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X128.10294 Y74.64863
G01 X128.10294 Y74.52163
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X129.41627 Y72.63342 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X129.41627 Y72.63342
G01 X129.40956 Y72.63525
G01 X129.22729 Y72.81749
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X126.76090 Y72.92846 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X126.76090 Y72.92846
G01 X126.76093 Y72.43832
G01 X126.75496 Y72.37769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X121.08093 Y67.86233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X121.08093 Y67.86233
G01 X121.08093 Y67.88232
G01 X121.09094 Y67.88232
G01 X121.18654 Y67.89172
G01 X121.27846 Y67.91961
G01 X121.36317 Y67.96490
G01 X121.43742 Y68.02583
G01 X121.49835 Y68.10008
G01 X121.54364 Y68.18479
G01 X121.57153 Y68.27671
G01 X121.58093 Y68.37231
G01 X121.58093 Y68.38232
G01 X121.60092 Y68.38232
G01 X121.60092 Y68.33609
G01 X121.59637 Y68.28489
G01 X121.56698 Y68.18214
G01 X121.51898 Y68.09025
G01 X121.45339 Y68.00986
G01 X121.37300 Y67.94427
G01 X121.28111 Y67.89627
G01 X121.17836 Y67.86688
G01 X121.12716 Y67.86233
G01 X121.08093 Y67.86233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X118.88093 Y68.33609 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X118.88093 Y68.33609
G01 X118.88093 Y68.38232
G01 X118.90095 Y68.38232
G01 X118.90095 Y68.37231
G01 X118.91035 Y68.27671
G01 X118.93823 Y68.18479
G01 X118.98352 Y68.10008
G01 X119.04446 Y68.02583
G01 X119.11870 Y67.96490
G01 X119.20341 Y67.91961
G01 X119.29533 Y67.89172
G01 X119.39094 Y67.88232
G01 X119.40092 Y67.88232
G01 X119.40092 Y67.86233
G01 X119.35469 Y67.86233
G01 X119.30349 Y67.86688
G01 X119.20074 Y67.89627
G01 X119.10885 Y67.94427
G01 X119.02846 Y68.00986
G01 X118.96287 Y68.09025
G01 X118.91487 Y68.18214
G01 X118.88548 Y68.28489
G01 X118.88093 Y68.33609
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X118.88093 Y70.06233 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X118.88093 Y70.06233
G01 X118.88093 Y70.10856
G01 X118.88548 Y70.15976
G01 X118.91487 Y70.26251
G01 X118.96287 Y70.35440
G01 X119.02846 Y70.43479
G01 X119.10885 Y70.50038
G01 X119.20074 Y70.54838
G01 X119.30349 Y70.57777
G01 X119.35469 Y70.58232
G01 X119.40092 Y70.58232
G01 X119.40092 Y70.56230
G01 X119.39094 Y70.56230
G01 X119.29533 Y70.55290
G01 X119.20341 Y70.52502
G01 X119.11870 Y70.47973
G01 X119.04446 Y70.41879
G01 X118.98352 Y70.34455
G01 X118.93823 Y70.25984
G01 X118.91035 Y70.16792
G01 X118.90095 Y70.07231
G01 X118.90095 Y70.06233
G01 X118.88093 Y70.06233
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X121.08093 Y70.56230 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X121.08093 Y70.56230
G01 X121.08093 Y70.58232
G01 X121.12716 Y70.58232
G01 X121.17836 Y70.57777
G01 X121.28111 Y70.54838
G01 X121.37300 Y70.50038
G01 X121.45339 Y70.43479
G01 X121.51898 Y70.35440
G01 X121.56698 Y70.26251
G01 X121.59637 Y70.15976
G01 X121.60092 Y70.10856
G01 X121.60092 Y70.06233
G01 X121.58093 Y70.06233
G01 X121.58093 Y70.07231
G01 X121.57153 Y70.16792
G01 X121.54364 Y70.25984
G01 X121.49835 Y70.34455
G01 X121.43742 Y70.41879
G01 X121.36317 Y70.47973
G01 X121.27846 Y70.52502
G01 X121.18654 Y70.55290
G01 X121.09094 Y70.56230
G01 X121.08093 Y70.56230
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X120.81867 Y72.43631 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X120.81867 Y72.43631
G01 X120.81867 Y74.13631
G01 X120.81984 Y74.17698
G01 X120.82190 Y74.19448
G01 X120.84837 Y74.28061
G01 X120.89221 Y74.35310
G01 X120.95215 Y74.41307
G01 X121.02457 Y74.45686
G01 X121.11082 Y74.48338
G01 X121.12825 Y74.48541
G01 X121.16894 Y74.48658
G01 X122.86894 Y74.48658
G01 X122.90958 Y74.48541
G01 X122.92708 Y74.48335
G01 X123.01321 Y74.45688
G01 X123.06098 Y74.42935
G01 X123.08570 Y74.41307
G01 X123.14564 Y74.35310
G01 X123.18948 Y74.28061
G01 X123.21595 Y74.19448
G01 X123.21801 Y74.17698
G01 X123.21918 Y74.13631
G01 X123.21918 Y72.43631
G01 X123.21801 Y72.39567
G01 X123.21595 Y72.37817
G01 X123.18948 Y72.29204
G01 X123.14564 Y72.21955
G01 X123.08570 Y72.15961
G01 X123.01321 Y72.11577
G01 X122.92708 Y72.08930
G01 X122.90958 Y72.08724
G01 X122.86894 Y72.08607
G01 X121.16894 Y72.08607
G01 X121.12827 Y72.08724
G01 X121.11077 Y72.08930
G01 X121.02464 Y72.11577
G01 X120.95215 Y72.15961
G01 X120.89218 Y72.21958
G01 X120.88311 Y72.23304
G01 X120.84837 Y72.29207
G01 X120.82190 Y72.37815
G01 X120.81984 Y72.39567
G01 X120.81867 Y72.43631
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X125.19799 Y79.07933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.30000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X125.19799 Y79.07933
G01 X124.27188 Y79.07930
G01 X122.31946 Y81.03173

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )