( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F200.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to cutter diameter 1.00000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.98698 Y12.15020 ( rapid move to begin. )
G01 Z-0.47500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X60.98698 Y38.82023
G01 X60.99660 Y38.91779
G01 X61.02505 Y39.01159
G01 X61.07125 Y39.09803
G01 X61.13343 Y39.17379
G01 X61.20920 Y39.23597
G01 X61.29371 Y39.28113
G01 X61.29564 Y39.28218
G01 X61.38944 Y39.31062
G01 X61.48700 Y39.32025
G01 X65.44000 Y39.32025
G01 X67.44000 Y39.32025
G01 X71.39300 Y39.32025
G01 X71.49054 Y39.31062
G01 X71.58431 Y39.28218
G01 X71.67077 Y39.23597
G01 X71.74654 Y39.17379
G01 X71.80870 Y39.09803
G01 X71.85492 Y39.01159
G01 X71.88337 Y38.91779
G01 X71.89300 Y38.82023
G01 X71.89300 Y12.15020
G01 X71.88337 Y12.05266
G01 X71.85492 Y11.95886
G01 X71.80870 Y11.87243
G01 X71.74654 Y11.79666
G01 X71.67077 Y11.73448
G01 X71.58431 Y11.68828
G01 X71.49054 Y11.65983
G01 X71.39300 Y11.65020
G01 X67.44000 Y11.65020
G01 X65.44000 Y11.65020
G01 X61.48700 Y11.65020
G01 X61.38944 Y11.65983
G01 X61.29564 Y11.68828
G01 X61.20920 Y11.73448
G01 X61.13343 Y11.79666
G01 X61.07125 Y11.87243
G01 X61.02505 Y11.95886
G01 X60.99660 Y12.05266
G01 X60.98698 Y12.15020
G01 Z-0.95000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X60.98698 Y38.82023
G01 X60.99660 Y38.91779
G01 X61.02505 Y39.01159
G01 X61.07125 Y39.09803
G01 X61.13343 Y39.17379
G01 X61.20920 Y39.23597
G01 X61.29371 Y39.28113
G01 X61.29564 Y39.28218
G01 X61.38944 Y39.31062
G01 X61.48700 Y39.32025
G01 X65.44000 Y39.32025
G00 Z-0.90000
G01 X67.44000 Y39.32025
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X71.39300 Y39.32025
G01 X71.49054 Y39.31062
G01 X71.58431 Y39.28218
G01 X71.67077 Y39.23597
G01 X71.74654 Y39.17379
G01 X71.80870 Y39.09803
G01 X71.85492 Y39.01159
G01 X71.88337 Y38.91779
G01 X71.89300 Y38.82023
G01 X71.89300 Y12.15020
G01 X71.88337 Y12.05266
G01 X71.85492 Y11.95886
G01 X71.80870 Y11.87243
G01 X71.74654 Y11.79666
G01 X71.67077 Y11.73448
G01 X71.58431 Y11.68828
G01 X71.49054 Y11.65983
G01 X71.39300 Y11.65020
G01 X67.44000 Y11.65020
G00 Z-0.90000
G01 X65.44000 Y11.65020
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X61.48700 Y11.65020
G01 X61.38944 Y11.65983
G01 X61.29564 Y11.68828
G01 X61.20920 Y11.73448
G01 X61.13343 Y11.79666
G01 X61.07125 Y11.87243
G01 X61.02505 Y11.95886
G01 X60.99660 Y12.05266
G01 X60.98698 Y12.15020
G01 Z-1.42500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X60.98698 Y38.82023
G01 X60.99660 Y38.91779
G01 X61.02505 Y39.01159
G01 X61.07125 Y39.09803
G01 X61.13343 Y39.17379
G01 X61.20920 Y39.23597
G01 X61.29371 Y39.28113
G01 X61.29564 Y39.28218
G01 X61.38944 Y39.31062
G01 X61.48700 Y39.32025
G01 X65.44000 Y39.32025
G00 Z-0.90000
G01 X67.44000 Y39.32025
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X71.39300 Y39.32025
G01 X71.49054 Y39.31062
G01 X71.58431 Y39.28218
G01 X71.67077 Y39.23597
G01 X71.74654 Y39.17379
G01 X71.80870 Y39.09803
G01 X71.85492 Y39.01159
G01 X71.88337 Y38.91779
G01 X71.89300 Y38.82023
G01 X71.89300 Y12.15020
G01 X71.88337 Y12.05266
G01 X71.85492 Y11.95886
G01 X71.80870 Y11.87243
G01 X71.74654 Y11.79666
G01 X71.67077 Y11.73448
G01 X71.58431 Y11.68828
G01 X71.49054 Y11.65983
G01 X71.39300 Y11.65020
G01 X67.44000 Y11.65020
G00 Z-0.90000
G01 X65.44000 Y11.65020
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X61.48700 Y11.65020
G01 X61.38944 Y11.65983
G01 X61.29564 Y11.68828
G01 X61.20920 Y11.73448
G01 X61.13343 Y11.79666
G01 X61.07125 Y11.87243
G01 X61.02505 Y11.95886
G01 X60.99660 Y12.05266
G01 X60.98698 Y12.15020
G01 Z-1.90000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X60.98698 Y38.82023
G01 X60.99660 Y38.91779
G01 X61.02505 Y39.01159
G01 X61.07125 Y39.09803
G01 X61.13343 Y39.17379
G01 X61.20920 Y39.23597
G01 X61.29371 Y39.28113
G01 X61.29564 Y39.28218
G01 X61.38944 Y39.31062
G01 X61.48700 Y39.32025
G01 X65.44000 Y39.32025
G00 Z-0.90000
G01 X67.44000 Y39.32025
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X71.39300 Y39.32025
G01 X71.49054 Y39.31062
G01 X71.58431 Y39.28218
G01 X71.67077 Y39.23597
G01 X71.74654 Y39.17379
G01 X71.80870 Y39.09803
G01 X71.85492 Y39.01159
G01 X71.88337 Y38.91779
G01 X71.89300 Y38.82023
G01 X71.89300 Y12.15020
G01 X71.88337 Y12.05266
G01 X71.85492 Y11.95886
G01 X71.80870 Y11.87243
G01 X71.74654 Y11.79666
G01 X71.67077 Y11.73448
G01 X71.58431 Y11.68828
G01 X71.49054 Y11.65983
G01 X71.39300 Y11.65020
G01 X67.44000 Y11.65020
G00 Z-0.90000
G01 X65.44000 Y11.65020
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X61.48700 Y11.65020
G01 X61.38944 Y11.65983
G01 X61.29564 Y11.68828
G01 X61.20920 Y11.73448
G01 X61.13343 Y11.79666
G01 X61.07125 Y11.87243
G01 X61.02505 Y11.95886
G01 X60.99660 Y12.05266
G01 X60.98698 Y12.15020
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X49.71296 Y2.21723 ( rapid move to begin. )
G01 Z-0.47500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X49.71296 Y38.79323
G01 X49.72258 Y38.89079
G01 X49.75103 Y38.98461
G01 X49.79723 Y39.07102
G01 X49.85941 Y39.14682
G01 X49.93518 Y39.20897
G01 X50.02162 Y39.25517
G01 X50.11542 Y39.28362
G01 X50.21298 Y39.29327
G01 X54.16598 Y39.29327
G01 X56.16598 Y39.29327
G01 X60.11898 Y39.29327
G01 X60.21652 Y39.28362
G01 X60.31032 Y39.25517
G01 X60.39676 Y39.20897
G01 X60.47252 Y39.14682
G01 X60.53470 Y39.07102
G01 X60.58091 Y38.98461
G01 X60.60935 Y38.89079
G01 X60.61898 Y38.79323
G01 X60.61898 Y2.21723
G01 X60.60935 Y2.11969
G01 X60.58091 Y2.02589
G01 X60.53470 Y1.93945
G01 X60.47252 Y1.86368
G01 X60.39676 Y1.80150
G01 X60.31032 Y1.75530
G01 X60.21652 Y1.72685
G01 X60.11898 Y1.71723
G01 X56.16598 Y1.71723
G01 X54.16598 Y1.71723
G01 X50.21298 Y1.71723
G01 X50.11542 Y1.72685
G01 X50.02162 Y1.75530
G01 X49.93518 Y1.80150
G01 X49.85941 Y1.86368
G01 X49.79723 Y1.93945
G01 X49.75103 Y2.02589
G01 X49.72258 Y2.11969
G01 X49.71296 Y2.21723
G01 Z-0.95000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X49.71296 Y38.79323
G01 X49.72258 Y38.89079
G01 X49.75103 Y38.98461
G01 X49.79723 Y39.07102
G01 X49.85941 Y39.14682
G01 X49.93518 Y39.20897
G01 X50.02162 Y39.25517
G01 X50.11542 Y39.28362
G01 X50.21298 Y39.29327
G01 X54.16598 Y39.29327
G00 Z-0.90000
G01 X56.16598 Y39.29327
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X60.11898 Y39.29327
G01 X60.21652 Y39.28362
G01 X60.31032 Y39.25517
G01 X60.39676 Y39.20897
G01 X60.47252 Y39.14682
G01 X60.53470 Y39.07102
G01 X60.58091 Y38.98461
G01 X60.60935 Y38.89079
G01 X60.61898 Y38.79323
G01 X60.61898 Y2.21723
G01 X60.60935 Y2.11969
G01 X60.58091 Y2.02589
G01 X60.53470 Y1.93945
G01 X60.47252 Y1.86368
G01 X60.39676 Y1.80150
G01 X60.31032 Y1.75530
G01 X60.21652 Y1.72685
G01 X60.11898 Y1.71723
G01 X56.16598 Y1.71723
G00 Z-0.90000
G01 X54.16598 Y1.71723
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X50.21298 Y1.71723
G01 X50.11542 Y1.72685
G01 X50.02162 Y1.75530
G01 X49.93518 Y1.80150
G01 X49.85941 Y1.86368
G01 X49.79723 Y1.93945
G01 X49.75103 Y2.02589
G01 X49.72258 Y2.11969
G01 X49.71296 Y2.21723
G01 Z-1.42500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X49.71296 Y38.79323
G01 X49.72258 Y38.89079
G01 X49.75103 Y38.98461
G01 X49.79723 Y39.07102
G01 X49.85941 Y39.14682
G01 X49.93518 Y39.20897
G01 X50.02162 Y39.25517
G01 X50.11542 Y39.28362
G01 X50.21298 Y39.29327
G01 X54.16598 Y39.29327
G00 Z-0.90000
G01 X56.16598 Y39.29327
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X60.11898 Y39.29327
G01 X60.21652 Y39.28362
G01 X60.31032 Y39.25517
G01 X60.39676 Y39.20897
G01 X60.47252 Y39.14682
G01 X60.53470 Y39.07102
G01 X60.58091 Y38.98461
G01 X60.60935 Y38.89079
G01 X60.61898 Y38.79323
G01 X60.61898 Y2.21723
G01 X60.60935 Y2.11969
G01 X60.58091 Y2.02589
G01 X60.53470 Y1.93945
G01 X60.47252 Y1.86368
G01 X60.39676 Y1.80150
G01 X60.31032 Y1.75530
G01 X60.21652 Y1.72685
G01 X60.11898 Y1.71723
G01 X56.16598 Y1.71723
G00 Z-0.90000
G01 X54.16598 Y1.71723
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X50.21298 Y1.71723
G01 X50.11542 Y1.72685
G01 X50.02162 Y1.75530
G01 X49.93518 Y1.80150
G01 X49.85941 Y1.86368
G01 X49.79723 Y1.93945
G01 X49.75103 Y2.02589
G01 X49.72258 Y2.11969
G01 X49.71296 Y2.21723
G01 Z-1.90000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X49.71296 Y38.79323
G01 X49.72258 Y38.89079
G01 X49.75103 Y38.98461
G01 X49.79723 Y39.07102
G01 X49.85941 Y39.14682
G01 X49.93518 Y39.20897
G01 X50.02162 Y39.25517
G01 X50.11542 Y39.28362
G01 X50.21298 Y39.29327
G01 X54.16598 Y39.29327
G00 Z-0.90000
G01 X56.16598 Y39.29327
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X60.11898 Y39.29327
G01 X60.21652 Y39.28362
G01 X60.31032 Y39.25517
G01 X60.39676 Y39.20897
G01 X60.47252 Y39.14682
G01 X60.53470 Y39.07102
G01 X60.58091 Y38.98461
G01 X60.60935 Y38.89079
G01 X60.61898 Y38.79323
G01 X60.61898 Y2.21723
G01 X60.60935 Y2.11969
G01 X60.58091 Y2.02589
G01 X60.53470 Y1.93945
G01 X60.47252 Y1.86368
G01 X60.39676 Y1.80150
G01 X60.31032 Y1.75530
G01 X60.21652 Y1.72685
G01 X60.11898 Y1.71723
G01 X56.16598 Y1.71723
G00 Z-0.90000
G01 X54.16598 Y1.71723
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X50.21298 Y1.71723
G01 X50.11542 Y1.72685
G01 X50.02162 Y1.75530
G01 X49.93518 Y1.80150
G01 X49.85941 Y1.86368
G01 X49.79723 Y1.93945
G01 X49.75103 Y2.02589
G01 X49.72258 Y2.11969
G01 X49.71296 Y2.21723
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X0.55712 Y14.83937 ( rapid move to begin. )
G01 Z-0.47500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y19.99887
G01 X0.55712 Y21.99887
G01 X0.55712 Y27.15837
G01 X0.56675 Y27.25594
G01 X0.59520 Y27.34974
G01 X0.64140 Y27.43617
G01 X0.70358 Y27.51194
G01 X0.77935 Y27.57412
G01 X0.86579 Y27.62032
G01 X0.95959 Y27.64877
G01 X1.05715 Y27.65840
G01 X46.77715 Y27.65840
G01 X46.87468 Y27.64877
G01 X46.96849 Y27.62032
G01 X47.05492 Y27.57412
G01 X47.13069 Y27.51194
G01 X47.19287 Y27.43617
G01 X47.23907 Y27.34974
G01 X47.24700 Y27.32365
G01 X47.26752 Y27.25594
G01 X47.27715 Y27.15837
G01 X47.27715 Y21.99887
G01 X47.27715 Y19.99887
G01 X47.27715 Y14.83937
G01 X47.26752 Y14.74184
G01 X47.23907 Y14.64804
G01 X47.19287 Y14.56160
G01 X47.13069 Y14.48583
G01 X47.05492 Y14.42365
G01 X46.96849 Y14.37745
G01 X46.87468 Y14.34900
G01 X46.77715 Y14.33938
G01 X1.05715 Y14.33938
G01 X0.95959 Y14.34900
G01 X0.86579 Y14.37745
G01 X0.77935 Y14.42365
G01 X0.70358 Y14.48583
G01 X0.64140 Y14.56160
G01 X0.62042 Y14.60087
G01 X0.59520 Y14.64804
G01 X0.56675 Y14.74184
G01 X0.55712 Y14.83937
G01 Z-0.95000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y19.99887
G00 Z-0.90000
G01 X0.55712 Y21.99887
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X0.55712 Y27.15837
G01 X0.56675 Y27.25594
G01 X0.59520 Y27.34974
G01 X0.64140 Y27.43617
G01 X0.70358 Y27.51194
G01 X0.77935 Y27.57412
G01 X0.86579 Y27.62032
G01 X0.95959 Y27.64877
G01 X1.05715 Y27.65840
G01 X46.77715 Y27.65840
G01 X46.87468 Y27.64877
G01 X46.96849 Y27.62032
G01 X47.05492 Y27.57412
G01 X47.13069 Y27.51194
G01 X47.19287 Y27.43617
G01 X47.23907 Y27.34974
G01 X47.24700 Y27.32365
G01 X47.26752 Y27.25594
G01 X47.27715 Y27.15837
G01 X47.27715 Y21.99887
G00 Z-0.90000
G01 X47.27715 Y19.99887
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X47.27715 Y14.83937
G01 X47.26752 Y14.74184
G01 X47.23907 Y14.64804
G01 X47.19287 Y14.56160
G01 X47.13069 Y14.48583
G01 X47.05492 Y14.42365
G01 X46.96849 Y14.37745
G01 X46.87468 Y14.34900
G01 X46.77715 Y14.33938
G01 X1.05715 Y14.33938
G01 X0.95959 Y14.34900
G01 X0.86579 Y14.37745
G01 X0.77935 Y14.42365
G01 X0.70358 Y14.48583
G01 X0.64140 Y14.56160
G01 X0.62042 Y14.60087
G01 X0.59520 Y14.64804
G01 X0.56675 Y14.74184
G01 X0.55712 Y14.83937
G01 Z-1.42500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y19.99887
G00 Z-0.90000
G01 X0.55712 Y21.99887
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X0.55712 Y27.15837
G01 X0.56675 Y27.25594
G01 X0.59520 Y27.34974
G01 X0.64140 Y27.43617
G01 X0.70358 Y27.51194
G01 X0.77935 Y27.57412
G01 X0.86579 Y27.62032
G01 X0.95959 Y27.64877
G01 X1.05715 Y27.65840
G01 X46.77715 Y27.65840
G01 X46.87468 Y27.64877
G01 X46.96849 Y27.62032
G01 X47.05492 Y27.57412
G01 X47.13069 Y27.51194
G01 X47.19287 Y27.43617
G01 X47.23907 Y27.34974
G01 X47.24700 Y27.32365
G01 X47.26752 Y27.25594
G01 X47.27715 Y27.15837
G01 X47.27715 Y21.99887
G00 Z-0.90000
G01 X47.27715 Y19.99887
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X47.27715 Y14.83937
G01 X47.26752 Y14.74184
G01 X47.23907 Y14.64804
G01 X47.19287 Y14.56160
G01 X47.13069 Y14.48583
G01 X47.05492 Y14.42365
G01 X46.96849 Y14.37745
G01 X46.87468 Y14.34900
G01 X46.77715 Y14.33938
G01 X1.05715 Y14.33938
G01 X0.95959 Y14.34900
G01 X0.86579 Y14.37745
G01 X0.77935 Y14.42365
G01 X0.70358 Y14.48583
G01 X0.64140 Y14.56160
G01 X0.62042 Y14.60087
G01 X0.59520 Y14.64804
G01 X0.56675 Y14.74184
G01 X0.55712 Y14.83937
G01 Z-1.90000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y19.99887
G00 Z-0.90000
G01 X0.55712 Y21.99887
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X0.55712 Y27.15837
G01 X0.56675 Y27.25594
G01 X0.59520 Y27.34974
G01 X0.64140 Y27.43617
G01 X0.70358 Y27.51194
G01 X0.77935 Y27.57412
G01 X0.86579 Y27.62032
G01 X0.95959 Y27.64877
G01 X1.05715 Y27.65840
G01 X46.77715 Y27.65840
G01 X46.87468 Y27.64877
G01 X46.96849 Y27.62032
G01 X47.05492 Y27.57412
G01 X47.13069 Y27.51194
G01 X47.19287 Y27.43617
G01 X47.23907 Y27.34974
G01 X47.24700 Y27.32365
G01 X47.26752 Y27.25594
G01 X47.27715 Y27.15837
G01 X47.27715 Y21.99887
G00 Z-0.90000
G01 X47.27715 Y19.99887
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X47.27715 Y14.83937
G01 X47.26752 Y14.74184
G01 X47.23907 Y14.64804
G01 X47.19287 Y14.56160
G01 X47.13069 Y14.48583
G01 X47.05492 Y14.42365
G01 X46.96849 Y14.37745
G01 X46.87468 Y14.34900
G01 X46.77715 Y14.33938
G01 X1.05715 Y14.33938
G01 X0.95959 Y14.34900
G01 X0.86579 Y14.37745
G01 X0.77935 Y14.42365
G01 X0.70358 Y14.48583
G01 X0.64140 Y14.56160
G01 X0.62042 Y14.60087
G01 X0.59520 Y14.64804
G01 X0.56675 Y14.74184
G01 X0.55712 Y14.83937
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X0.55712 Y28.48890 ( rapid move to begin. )
G01 Z-0.47500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y33.71190
G01 X0.55712 Y35.71190
G01 X0.55712 Y40.93490
G01 X0.56675 Y41.03246
G01 X0.59520 Y41.12627
G01 X0.64140 Y41.21270
G01 X0.70358 Y41.28847
G01 X0.77935 Y41.35065
G01 X0.86579 Y41.39685
G01 X0.95959 Y41.42530
G01 X1.05715 Y41.43493
G01 X46.77715 Y41.43493
G01 X46.87468 Y41.42530
G01 X46.96849 Y41.39685
G01 X47.05492 Y41.35065
G01 X47.13069 Y41.28847
G01 X47.19287 Y41.21270
G01 X47.23907 Y41.12627
G01 X47.26752 Y41.03246
G01 X47.27715 Y40.93490
G01 X47.27715 Y35.71190
G01 X47.27715 Y33.71190
G01 X47.27715 Y28.48890
G01 X47.26752 Y28.39137
G01 X47.23907 Y28.29756
G01 X47.19287 Y28.21113
G01 X47.13069 Y28.13536
G01 X47.05492 Y28.07318
G01 X46.96849 Y28.02698
G01 X46.87468 Y27.99853
G01 X46.77715 Y27.98890
G01 X1.05715 Y27.98890
G01 X0.95959 Y27.99853
G01 X0.86579 Y28.02698
G01 X0.77935 Y28.07318
G01 X0.70358 Y28.13536
G01 X0.64140 Y28.21113
G01 X0.59520 Y28.29756
G01 X0.58727 Y28.32365
G01 X0.56675 Y28.39137
G01 X0.55712 Y28.48890
G01 Z-0.95000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y33.71190
G00 Z-0.90000
G01 X0.55712 Y35.71190
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X0.55712 Y40.93490
G01 X0.56675 Y41.03246
G01 X0.59520 Y41.12627
G01 X0.64140 Y41.21270
G01 X0.70358 Y41.28847
G01 X0.77935 Y41.35065
G01 X0.86579 Y41.39685
G01 X0.95959 Y41.42530
G01 X1.05715 Y41.43493
G01 X46.77715 Y41.43493
G01 X46.87468 Y41.42530
G01 X46.96849 Y41.39685
G01 X47.05492 Y41.35065
G01 X47.13069 Y41.28847
G01 X47.19287 Y41.21270
G01 X47.23907 Y41.12627
G01 X47.26752 Y41.03246
G01 X47.27715 Y40.93490
G01 X47.27715 Y35.71190
G00 Z-0.90000
G01 X47.27715 Y33.71190
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X47.27715 Y28.48890
G01 X47.26752 Y28.39137
G01 X47.23907 Y28.29756
G01 X47.19287 Y28.21113
G01 X47.13069 Y28.13536
G01 X47.05492 Y28.07318
G01 X46.96849 Y28.02698
G01 X46.87468 Y27.99853
G01 X46.77715 Y27.98890
G01 X1.05715 Y27.98890
G01 X0.95959 Y27.99853
G01 X0.86579 Y28.02698
G01 X0.77935 Y28.07318
G01 X0.70358 Y28.13536
G01 X0.64140 Y28.21113
G01 X0.59520 Y28.29756
G01 X0.58727 Y28.32365
G01 X0.56675 Y28.39137
G01 X0.55712 Y28.48890
G01 Z-1.42500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y33.71190
G00 Z-0.90000
G01 X0.55712 Y35.71190
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X0.55712 Y40.93490
G01 X0.56675 Y41.03246
G01 X0.59520 Y41.12627
G01 X0.64140 Y41.21270
G01 X0.70358 Y41.28847
G01 X0.77935 Y41.35065
G01 X0.86579 Y41.39685
G01 X0.95959 Y41.42530
G01 X1.05715 Y41.43493
G01 X46.77715 Y41.43493
G01 X46.87468 Y41.42530
G01 X46.96849 Y41.39685
G01 X47.05492 Y41.35065
G01 X47.13069 Y41.28847
G01 X47.19287 Y41.21270
G01 X47.23907 Y41.12627
G01 X47.26752 Y41.03246
G01 X47.27715 Y40.93490
G01 X47.27715 Y35.71190
G00 Z-0.90000
G01 X47.27715 Y33.71190
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X47.27715 Y28.48890
G01 X47.26752 Y28.39137
G01 X47.23907 Y28.29756
G01 X47.19287 Y28.21113
G01 X47.13069 Y28.13536
G01 X47.05492 Y28.07318
G01 X46.96849 Y28.02698
G01 X46.87468 Y27.99853
G01 X46.77715 Y27.98890
G01 X1.05715 Y27.98890
G01 X0.95959 Y27.99853
G01 X0.86579 Y28.02698
G01 X0.77935 Y28.07318
G01 X0.70358 Y28.13536
G01 X0.64140 Y28.21113
G01 X0.59520 Y28.29756
G01 X0.58727 Y28.32365
G01 X0.56675 Y28.39137
G01 X0.55712 Y28.48890
G01 Z-1.90000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.55712 Y33.71190
G00 Z-0.90000
G01 X0.55712 Y35.71190
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X0.55712 Y40.93490
G01 X0.56675 Y41.03246
G01 X0.59520 Y41.12627
G01 X0.64140 Y41.21270
G01 X0.70358 Y41.28847
G01 X0.77935 Y41.35065
G01 X0.86579 Y41.39685
G01 X0.95959 Y41.42530
G01 X1.05715 Y41.43493
G01 X46.77715 Y41.43493
G01 X46.87468 Y41.42530
G01 X46.96849 Y41.39685
G01 X47.05492 Y41.35065
G01 X47.13069 Y41.28847
G01 X47.19287 Y41.21270
G01 X47.23907 Y41.12627
G01 X47.26752 Y41.03246
G01 X47.27715 Y40.93490
G01 X47.27715 Y35.71190
G00 Z-0.90000
G01 X47.27715 Y33.71190
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X47.27715 Y28.48890
G01 X47.26752 Y28.39137
G01 X47.23907 Y28.29756
G01 X47.19287 Y28.21113
G01 X47.13069 Y28.13536
G01 X47.05492 Y28.07318
G01 X46.96849 Y28.02698
G01 X46.87468 Y27.99853
G01 X46.77715 Y27.98890
G01 X1.05715 Y27.98890
G01 X0.95959 Y27.99853
G01 X0.86579 Y28.02698
G01 X0.77935 Y28.07318
G01 X0.70358 Y28.13536
G01 X0.64140 Y28.21113
G01 X0.59520 Y28.29756
G01 X0.58727 Y28.32365
G01 X0.56675 Y28.39137
G01 X0.55712 Y28.48890
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X0.52497 Y1.02500 ( rapid move to begin. )
G01 Z-0.47500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.52497 Y6.18450
G01 X0.52497 Y8.18450
G01 X0.52497 Y13.34400
G01 X0.53459 Y13.44156
G01 X0.56304 Y13.53536
G01 X0.60925 Y13.62180
G01 X0.67142 Y13.69757
G01 X0.74719 Y13.75975
G01 X0.83363 Y13.80595
G01 X0.92743 Y13.83440
G01 X1.02499 Y13.84402
G01 X46.87199 Y13.84402
G01 X46.96953 Y13.83440
G01 X47.06333 Y13.80595
G01 X47.14977 Y13.75975
G01 X47.22553 Y13.69757
G01 X47.28771 Y13.62180
G01 X47.28860 Y13.62012
G01 X47.33392 Y13.53536
G01 X47.36236 Y13.44156
G01 X47.37199 Y13.34400
G01 X47.37199 Y8.18450
G01 X47.37199 Y6.18450
G01 X47.37199 Y1.02500
G01 X47.36236 Y0.92746
G01 X47.33392 Y0.83366
G01 X47.28771 Y0.74723
G01 X47.22553 Y0.67146
G01 X47.14977 Y0.60928
G01 X47.06333 Y0.56308
G01 X46.96953 Y0.53463
G01 X46.87199 Y0.52500
G01 X1.02499 Y0.52500
G01 X0.92743 Y0.53463
G01 X0.83363 Y0.56308
G01 X0.74719 Y0.60928
G01 X0.67142 Y0.67146
G01 X0.60925 Y0.74723
G01 X0.56304 Y0.83366
G01 X0.53459 Y0.92746
G01 X0.52497 Y1.02500
G01 Z-0.95000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.52497 Y6.18450
G00 Z-0.90000
G01 X0.52497 Y8.18450
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X0.52497 Y13.34400
G01 X0.53459 Y13.44156
G01 X0.56304 Y13.53536
G01 X0.60925 Y13.62180
G01 X0.67142 Y13.69757
G01 X0.74719 Y13.75975
G01 X0.83363 Y13.80595
G01 X0.92743 Y13.83440
G01 X1.02499 Y13.84402
G01 X46.87199 Y13.84402
G01 X46.96953 Y13.83440
G01 X47.06333 Y13.80595
G01 X47.14977 Y13.75975
G01 X47.22553 Y13.69757
G01 X47.28771 Y13.62180
G01 X47.28860 Y13.62012
G01 X47.33392 Y13.53536
G01 X47.36236 Y13.44156
G01 X47.37199 Y13.34400
G01 X47.37199 Y8.18450
G00 Z-0.90000
G01 X47.37199 Y6.18450
G01 Z-0.95000 F60.00000
G01 F200.00000
G01 X47.37199 Y1.02500
G01 X47.36236 Y0.92746
G01 X47.33392 Y0.83366
G01 X47.28771 Y0.74723
G01 X47.22553 Y0.67146
G01 X47.14977 Y0.60928
G01 X47.06333 Y0.56308
G01 X46.96953 Y0.53463
G01 X46.87199 Y0.52500
G01 X1.02499 Y0.52500
G01 X0.92743 Y0.53463
G01 X0.83363 Y0.56308
G01 X0.74719 Y0.60928
G01 X0.67142 Y0.67146
G01 X0.60925 Y0.74723
G01 X0.56304 Y0.83366
G01 X0.53459 Y0.92746
G01 X0.52497 Y1.02500
G01 Z-1.42500 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.52497 Y6.18450
G00 Z-0.90000
G01 X0.52497 Y8.18450
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X0.52497 Y13.34400
G01 X0.53459 Y13.44156
G01 X0.56304 Y13.53536
G01 X0.60925 Y13.62180
G01 X0.67142 Y13.69757
G01 X0.74719 Y13.75975
G01 X0.83363 Y13.80595
G01 X0.92743 Y13.83440
G01 X1.02499 Y13.84402
G01 X46.87199 Y13.84402
G01 X46.96953 Y13.83440
G01 X47.06333 Y13.80595
G01 X47.14977 Y13.75975
G01 X47.22553 Y13.69757
G01 X47.28771 Y13.62180
G01 X47.28860 Y13.62012
G01 X47.33392 Y13.53536
G01 X47.36236 Y13.44156
G01 X47.37199 Y13.34400
G01 X47.37199 Y8.18450
G00 Z-0.90000
G01 X47.37199 Y6.18450
G01 Z-1.42500 F60.00000
G01 F200.00000
G01 X47.37199 Y1.02500
G01 X47.36236 Y0.92746
G01 X47.33392 Y0.83366
G01 X47.28771 Y0.74723
G01 X47.22553 Y0.67146
G01 X47.14977 Y0.60928
G01 X47.06333 Y0.56308
G01 X46.96953 Y0.53463
G01 X46.87199 Y0.52500
G01 X1.02499 Y0.52500
G01 X0.92743 Y0.53463
G01 X0.83363 Y0.56308
G01 X0.74719 Y0.60928
G01 X0.67142 Y0.67146
G01 X0.60925 Y0.74723
G01 X0.56304 Y0.83366
G01 X0.53459 Y0.92746
G01 X0.52497 Y1.02500
G01 Z-1.90000 F60.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F200.00000
G01 X0.52497 Y6.18450
G00 Z-0.90000
G01 X0.52497 Y8.18450
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X0.52497 Y13.34400
G01 X0.53459 Y13.44156
G01 X0.56304 Y13.53536
G01 X0.60925 Y13.62180
G01 X0.67142 Y13.69757
G01 X0.74719 Y13.75975
G01 X0.83363 Y13.80595
G01 X0.92743 Y13.83440
G01 X1.02499 Y13.84402
G01 X46.87199 Y13.84402
G01 X46.96953 Y13.83440
G01 X47.06333 Y13.80595
G01 X47.14977 Y13.75975
G01 X47.22553 Y13.69757
G01 X47.28771 Y13.62180
G01 X47.28860 Y13.62012
G01 X47.33392 Y13.53536
G01 X47.36236 Y13.44156
G01 X47.37199 Y13.34400
G01 X47.37199 Y8.18450
G00 Z-0.90000
G01 X47.37199 Y6.18450
G01 Z-1.90000 F60.00000
G01 F200.00000
G01 X47.37199 Y1.02500
G01 X47.36236 Y0.92746
G01 X47.33392 Y0.83366
G01 X47.28771 Y0.74723
G01 X47.22553 Y0.67146
G01 X47.14977 Y0.60928
G01 X47.06333 Y0.56308
G01 X46.96953 Y0.53463
G01 X46.87199 Y0.52500
G01 X1.02499 Y0.52500
G01 X0.92743 Y0.53463
G01 X0.83363 Y0.56308
G01 X0.74719 Y0.60928
G01 X0.67142 Y0.67146
G01 X0.60925 Y0.74723
G01 X0.56304 Y0.83366
G01 X0.53459 Y0.92746
G01 X0.52497 Y1.02500

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )