Fix ADC scaling to voltages, GUI: chart autoscale, labels, units
This commit is contained in:
jonny
parent
ee55d4483f
commit
0e0f9e053c
@ -9,14 +9,15 @@ import time
|
||||
sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
|
||||
from interface_board_libs.adc_mcp3208 import MCP3208 # custom driver for ADC-IC
|
||||
from interface_board_pins import (
|
||||
ADC_CHANNELS,
|
||||
|
||||
# mapping of ADC channels to terminals + max value:
|
||||
ADC_TERMINALS,
|
||||
# mapping of ADC channels to terminals:
|
||||
ADC_CHANNEL_T0__0_TO_3V3,
|
||||
ADC_CHANNEL_T1__0_TO_3V3,
|
||||
ADC_CHANNEL_T2__0_TO_5V,
|
||||
ADC_CHANNEL_T3__0_TO_5V,
|
||||
ADC_CHANNEL_T4__0_TO_12V,
|
||||
ADC_CHANNEL_T5__0_TO_12V,
|
||||
ADC_CHANNEL_T5__0_TO_24V,
|
||||
ADC_CHANNEL_T6__0_TO_20MA,
|
||||
ADC_CHANNEL_T7__0_TO_20MA,
|
||||
) # mapping of ADC channels to terminals
|
||||
@ -36,13 +37,15 @@ def adc2value(adc_value, max_value):
|
||||
|
||||
|
||||
while True:
|
||||
print ("")
|
||||
print("-" * 40)
|
||||
|
||||
# Read all available channels in a loop according to terminal order / map
|
||||
values = []
|
||||
for terminal, adc_channel in ADC_CHANNELS.items():
|
||||
for terminal, config in ADC_TERMINALS.items():
|
||||
adc_channel = config["adc_channel"]
|
||||
max_value = config["max_value"]
|
||||
value = adc.read(adc_channel)
|
||||
print(f"T{terminal}: ADC={value:04d} => U_ADC = {adc2value(value, 3.3):5.3f}V")
|
||||
print(f"T{terminal}: ADC={value:04d} => U_ADC = {adc2value(value, max_value):5.3f}V")
|
||||
|
||||
|
||||
# Read channels one by one using defined constants (more intuitive)
|
||||
@ -62,8 +65,8 @@ while True:
|
||||
value = adc.read(ADC_CHANNEL_T4__0_TO_12V)
|
||||
print(f"Terminal 4 (0 to 12V): ADC={value:04d} => Terminal={adc2value(value, 12):05.2f}V")
|
||||
|
||||
value = adc.read(ADC_CHANNEL_T5__0_TO_12V)
|
||||
print(f"Terminal 5 (0 to 12V): ADC={value:04d} => Terminal={adc2value(value, 12):05.2f}V")
|
||||
value = adc.read(ADC_CHANNEL_T5__0_TO_24V)
|
||||
print(f"Terminal 5 (0 to 24V): ADC={value:04d} => Terminal={adc2value(value, 24):05.2f}V")
|
||||
|
||||
value = adc.read(ADC_CHANNEL_T6__0_TO_20MA)
|
||||
print(f"Terminal 6 (0 to 20mA): ADC={value:04d} => Terminal={adc2value(value, 20):05.2f}mA")
|
||||
|
||||
@ -19,10 +19,12 @@ from tab_digital_plot import create_digital_plot_tab
|
||||
from tab_digital_plot import set_updating_enabled as tab_digital_plot__set_updating_enabled
|
||||
from tab_exit import create_exit_tab
|
||||
|
||||
|
||||
# Initialize ADC & Shift Register
|
||||
adc = MCP3208()
|
||||
shift_reg = ShiftRegister(GPIO_SHIFT_REG_DATA, GPIO_SHIFT_REG_LATCH, GPIO_SHIFT_REG_CLOCK)
|
||||
|
||||
|
||||
# GPIO Setup
|
||||
GPIO.setmode(GPIO.BCM)
|
||||
for pin in GPIO_DIGITAL_INPUTS.values():
|
||||
@ -34,16 +36,19 @@ pwm2 = GPIO.PWM(GPIO_PWM2, 1000)
|
||||
pwm1.start(0)
|
||||
pwm2.start(0)
|
||||
|
||||
|
||||
# Tkinter GUI
|
||||
root = tk.Tk()
|
||||
root.title("Raspberry Pi Interface Board")
|
||||
root.attributes('-fullscreen', True)
|
||||
root.configure(bg="black")
|
||||
|
||||
|
||||
# Tabbed Interface
|
||||
notebook = ttk.Notebook(root)
|
||||
notebook.pack(expand=True, fill="both")
|
||||
|
||||
|
||||
# Track active tab
|
||||
def on_tab_change(event):
|
||||
active_tab = event.widget.tab(event.widget.index("current"), "text")
|
||||
@ -61,16 +66,25 @@ def on_tab_change(event):
|
||||
tab_control__set_updating_enabled(True)
|
||||
tab_analog_plot__set_updating_enabled(False)
|
||||
tab_digital_plot__set_updating_enabled(False)
|
||||
case "EXIT":
|
||||
pass
|
||||
case _:
|
||||
print(f"unhandled change to tab {active_tab}")
|
||||
|
||||
notebook.bind("<<NotebookTabChanged>>", on_tab_change)
|
||||
|
||||
|
||||
# Add tabs
|
||||
create_control_tab(notebook, adc, shift_reg, pwm1, pwm2)
|
||||
create_adc_plot_tab(notebook, adc)
|
||||
create_digital_plot_tab(notebook)
|
||||
create_exit_tab(notebook, root, pwm1, pwm2)
|
||||
|
||||
|
||||
# Run GUI
|
||||
try:
|
||||
root.mainloop()
|
||||
|
||||
except KeyboardInterrupt:
|
||||
print('Keyboard interrupt -> exiting')
|
||||
exit()
|
||||
@ -1,17 +1,30 @@
|
||||
import sys
|
||||
import os
|
||||
import tkinter as tk
|
||||
from tkinter import ttk
|
||||
from matplotlib.figure import Figure
|
||||
from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg
|
||||
import time
|
||||
|
||||
ADC_PLOT_UPDATE_INTERVAL = 50 # 20 FPS, smooth and efficient
|
||||
NOT_ACTIVE_CHECK_INTERVAL = 2000
|
||||
MAX_HISTORY = 100
|
||||
# Add the parent directory to the module search path
|
||||
sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
|
||||
from interface_board_pins import ADC_TERMINALS # Import pin assignments
|
||||
|
||||
|
||||
# CONFIG
|
||||
ADC_PLOT_UPDATE_DELAY_MS = 50 # note: delay is additional to time it takes to update the chart
|
||||
TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000
|
||||
MAX_X_HISTORY_VALUES = 150
|
||||
AUTO_SCALE_ENABLED = True
|
||||
DEBUG = False
|
||||
|
||||
|
||||
# Variables
|
||||
updating_enabled = False
|
||||
adc_channels = list(range(8))
|
||||
data = {ch: [0] * MAX_HISTORY for ch in adc_channels} # Preallocate lists
|
||||
time_data = list(range(-MAX_HISTORY, 0)) # Simulated time axis
|
||||
data = {ch: [0] * MAX_X_HISTORY_VALUES for ch in adc_channels} # Preallocate lists
|
||||
time_data = list(range(-MAX_X_HISTORY_VALUES, 0)) # Simulated time axis
|
||||
|
||||
|
||||
def create_adc_plot_tab(notebook, adc):
|
||||
frame = ttk.Frame(notebook)
|
||||
@ -19,34 +32,55 @@ def create_adc_plot_tab(notebook, adc):
|
||||
|
||||
figure = Figure(figsize=(8, 5), dpi=100)
|
||||
ax = figure.add_subplot(1, 1, 1)
|
||||
ax.set_ylim(0, 12)
|
||||
ax.set_xlim(-MAX_HISTORY, 0) # Keep time axis fixed
|
||||
|
||||
ax.set_title("ADC Inputs") # Set title
|
||||
ax.set_xlabel("Time (s)") # X-axis label
|
||||
ax.set_ylabel("Voltage / Current (V / mA)") # Y-axis label
|
||||
|
||||
ax.set_xlim(-MAX_X_HISTORY_VALUES, 0) # Keep time axis fixed
|
||||
canvas = FigureCanvasTkAgg(figure, master=frame)
|
||||
canvas.get_tk_widget().pack(fill=tk.BOTH, expand=True)
|
||||
|
||||
# Initialize lines for fast updates
|
||||
lines = {ch: ax.plot(time_data, data[ch], label=f"ADC {ch+1}")[0] for ch in adc_channels}
|
||||
lines = {}
|
||||
for terminal, config in ADC_TERMINALS.items():
|
||||
label = f"T{terminal} ({config['max_value']} {config['unit']})" # Format: T1 (3.3V)
|
||||
lines[terminal] = ax.plot(time_data, data[terminal], label=label)[0]
|
||||
|
||||
ax.legend() # Show legend
|
||||
|
||||
def update_plot():
|
||||
if not updating_enabled:
|
||||
frame.after(NOT_ACTIVE_CHECK_INTERVAL, update_plot)
|
||||
frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_plot)
|
||||
return
|
||||
|
||||
# Shift existing data left
|
||||
for ch in adc_channels:
|
||||
data[ch].pop(0)
|
||||
data[ch].append(round(adc.read(ch) * 12 / 4095, 2))
|
||||
for terminal, config in ADC_TERMINALS.items():
|
||||
adc_channel = config["adc_channel"]
|
||||
max_value = config["max_value"]
|
||||
# Shift existing data left and
|
||||
# read new data + scale based on the correct max voltage
|
||||
data[terminal].pop(0)
|
||||
data[terminal].append(round(adc.read(adc_channel) * max_value / 4095, 2))
|
||||
|
||||
# Update only the y-data for efficiency
|
||||
for ch in adc_channels:
|
||||
lines[ch].set_ydata(data[ch])
|
||||
# Recalculate limits (autoscale)
|
||||
if AUTO_SCALE_ENABLED:
|
||||
ax.set_ylim(bottom=0) # Lower limit always 0
|
||||
ax.autoscale(enable=True, axis='y', tight=False) # Enable autoscale for upper limit
|
||||
ax.relim() # Recalculate limits
|
||||
ax.autoscale_view(scalex=False, scaley=True) # Autoscale only y-axis
|
||||
else:
|
||||
ax.set_ylim(0, 24) # Fixed range if autoscale is disabled
|
||||
|
||||
for terminal in ADC_TERMINALS:
|
||||
lines[terminal].set_ydata(data[terminal])
|
||||
|
||||
canvas.draw_idle() # Efficient redraw
|
||||
frame.after(ADC_PLOT_UPDATE_INTERVAL, update_plot)
|
||||
frame.after(ADC_PLOT_UPDATE_DELAY_MS, update_plot)
|
||||
|
||||
update_plot()
|
||||
|
||||
|
||||
def set_updating_enabled(is_active):
|
||||
global updating_enabled
|
||||
updating_enabled = is_active
|
||||
print(f"adc_plot tab: set updating_enabled to {updating_enabled}")
|
||||
if DEBUG: print(f"adc_plot tab: set updating_enabled to {updating_enabled}")
|
||||
|
||||
@ -8,11 +8,17 @@ import RPi.GPIO as GPIO
|
||||
sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
|
||||
from interface_board_pins import * # Import pin assignments
|
||||
|
||||
|
||||
# CONFIG
|
||||
ADC_VALUES_UPDATE_INTERVAL_MS = 500
|
||||
DIGITAL_INPUTS_UPDATE_INTERVAL_MS = 200
|
||||
TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000
|
||||
DEBUG = False
|
||||
|
||||
|
||||
# Variables
|
||||
updating_enabled = False
|
||||
|
||||
ADC_VALUES_UPDATE_INTERVAL = 500
|
||||
DIGITAL_INPUTS_UPDATE_INTERVAL = 200
|
||||
NOT_ACTIVE_CHECK_INTERVAL = 2000
|
||||
|
||||
def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
frame = ttk.Frame(notebook)
|
||||
@ -20,26 +26,36 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
|
||||
digital_input_states = [tk.StringVar(value="LOW") for _ in range(8)]
|
||||
digital_output_states = [tk.BooleanVar(value=False) for _ in range(8)]
|
||||
adc_values = [tk.StringVar(value="0.00V") for _ in range(8)]
|
||||
adc_values = [tk.StringVar(value=" --- ") for _ in range(8)]
|
||||
pwm_values = [tk.IntVar(value=0), tk.IntVar(value=0)]
|
||||
output_buttons = {} # Store button references to change colors
|
||||
|
||||
|
||||
def update_inputs():
|
||||
if not updating_enabled:
|
||||
frame.after(NOT_ACTIVE_CHECK_INTERVAL, update_inputs)
|
||||
frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_inputs)
|
||||
return
|
||||
for i, pin in enumerate(GPIO_DIGITAL_INPUTS.values()):
|
||||
digital_input_states[i].set("HIGH" if GPIO.input(pin) else "LOW")
|
||||
frame.after(DIGITAL_INPUTS_UPDATE_INTERVAL, update_inputs)
|
||||
frame.after(DIGITAL_INPUTS_UPDATE_INTERVAL_MS, update_inputs)
|
||||
|
||||
|
||||
def update_adc():
|
||||
if not updating_enabled:
|
||||
frame.after(NOT_ACTIVE_CHECK_INTERVAL, update_adc)
|
||||
frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_adc)
|
||||
return
|
||||
for i, adc_channel in enumerate(ADC_CHANNELS.values()):
|
||||
|
||||
for terminal, config in ADC_TERMINALS.items():
|
||||
adc_channel = config["adc_channel"]
|
||||
max_value = config["max_value"]
|
||||
unit = config["unit"]
|
||||
|
||||
# Read ADC value and scale to the correct voltage
|
||||
value = adc.read(adc_channel)
|
||||
adc_values[i].set(f"{round(value * 12 / 4095, 2)}V")
|
||||
frame.after(ADC_VALUES_UPDATE_INTERVAL, update_adc)
|
||||
adc_values[terminal].set(f"{value * max_value / 4095:4.2f} {unit}")
|
||||
|
||||
frame.after(ADC_VALUES_UPDATE_INTERVAL_MS, update_adc)
|
||||
|
||||
|
||||
def toggle_output(index):
|
||||
""" Toggle shift register output and update button color. """
|
||||
@ -51,6 +67,7 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
for btn in output_buttons[index]:
|
||||
btn.configure(bg="green" if new_state else "red", activebackground="green" if new_state else "red")
|
||||
|
||||
|
||||
style = ttk.Style()
|
||||
style.configure("TScale", thickness=60)
|
||||
style.configure("TButton", font=("Arial", 18), padding=5)
|
||||
@ -63,12 +80,12 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
frame.grid_columnconfigure(0, weight=1)
|
||||
|
||||
for i in range(8):
|
||||
ttk.Label(control_frame, text=f"ADC {i}:", font=("Arial", 18)).grid(row=i, column=0, sticky="e")
|
||||
ttk.Label(control_frame, text=f"ADC-{i}: ", font=("Arial", 18)).grid(row=i, column=0, sticky="e")
|
||||
ttk.Label(control_frame, textvariable=adc_values[i], width=10, font=("Arial", 18)).grid(row=i, column=1, sticky="w")
|
||||
ttk.Label(control_frame, text=f"IN {i}:", font=("Arial", 18)).grid(row=i, column=2, sticky="e", padx=20)
|
||||
ttk.Label(control_frame, text=f"IN-{i}:", font=("Arial", 18)).grid(row=i, column=2, sticky="e", padx=20)
|
||||
ttk.Label(control_frame, textvariable=digital_input_states[i], width=6, font=("Arial", 18)).grid(row=i, column=3, sticky="w")
|
||||
|
||||
btn = tk.Button(control_frame, text=f"OUT {i}", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda i=i: toggle_output(i))
|
||||
btn = tk.Button(control_frame, text=f"OUT-{i}", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda i=i: toggle_output(i))
|
||||
btn.grid(row=i, column=4, sticky="w", padx=20)
|
||||
|
||||
output_buttons.setdefault(i, []).append(btn)
|
||||
@ -95,7 +112,7 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
pwm_frame.columnconfigure(1, weight=1)
|
||||
pwm_frame.columnconfigure(2, weight=0)
|
||||
|
||||
pwm1_label = ttk.Label(pwm_frame, text="PWM1:", font=("Arial", 18))
|
||||
pwm1_label = ttk.Label(pwm_frame, text="PWM-1:", font=("Arial", 18))
|
||||
pwm1_label.grid(row=0, column=0, padx=20, sticky="e")
|
||||
|
||||
pwm1_slider = ttk.Scale(
|
||||
@ -104,7 +121,7 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
)
|
||||
pwm1_slider.grid(row=0, column=1, columnspan=2, sticky="we", padx=10)
|
||||
|
||||
pwm2_label = ttk.Label(pwm_frame, text="PWM2:", font=("Arial", 18))
|
||||
pwm2_label = ttk.Label(pwm_frame, text="PWM-2:", font=("Arial", 18))
|
||||
pwm2_label.grid(row=1, column=0, padx=20, sticky="e")
|
||||
|
||||
pwm2_slider = ttk.Scale(
|
||||
@ -116,7 +133,9 @@ def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
|
||||
update_inputs()
|
||||
update_adc()
|
||||
|
||||
|
||||
|
||||
def set_updating_enabled(is_active):
|
||||
global updating_enabled
|
||||
updating_enabled = is_active
|
||||
print(f"control tab: set updating_enabled to {updating_enabled}")
|
||||
if DEBUG: print(f"control tab: set updating_enabled to {updating_enabled}")
|
||||
|
||||
@ -11,15 +11,19 @@ import time
|
||||
sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
|
||||
from interface_board_pins import * # Import pin assignments
|
||||
|
||||
# Adjusted Constants
|
||||
DIGITAL_PLOT_UPDATE_INTERVAL = 50 # 50ms (20 FPS) is smooth enough
|
||||
NOT_ACTIVE_CHECK_INTERVAL = 2000 # Check inactive tabs less frequently
|
||||
MAX_HISTORY = 100 # Keep last 100 values for scrolling
|
||||
|
||||
# CONFIG
|
||||
DIGITAL_PLOT_UPDATE_DELAY_MS = 50 # note: delay is additional to time it takes to update the chart
|
||||
TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000 # Check inactive tabs less frequently
|
||||
MAX_X_HISTORY_VALUES = 100 # Keep last 100 values for scrolling
|
||||
DEBUG = False
|
||||
|
||||
|
||||
# Variables
|
||||
updating_enabled = False # Track if the tab is active
|
||||
input_channels = list(range(8))
|
||||
data = {ch: [0] * MAX_HISTORY for ch in input_channels} # Preallocate data
|
||||
time_data = list(range(-MAX_HISTORY, 0)) # Simulated time axis
|
||||
data = {ch: [0] * MAX_X_HISTORY_VALUES for ch in input_channels} # Preallocate data
|
||||
time_data = list(range(-MAX_X_HISTORY_VALUES, 0)) # Simulated time axis
|
||||
|
||||
|
||||
def create_digital_plot_tab(notebook):
|
||||
@ -28,17 +32,27 @@ def create_digital_plot_tab(notebook):
|
||||
|
||||
figure = Figure(figsize=(8, 5), dpi=100)
|
||||
ax = figure.add_subplot(1, 1, 1)
|
||||
|
||||
ax.set_title("Digital Inputs") # Set title
|
||||
ax.set_xlabel("Time (s)") # X-axis label
|
||||
ax.set_ylabel("State (1=HIGH / 0=LOW)") # Y-axis label
|
||||
|
||||
ax.set_ylim(-0.2, 1.2)
|
||||
ax.set_xlim(-MAX_HISTORY, 0) # Keep time axis fixed
|
||||
ax.set_xlim(-MAX_X_HISTORY_VALUES, 0) # Keep time axis fixed
|
||||
canvas = FigureCanvasTkAgg(figure, master=frame)
|
||||
canvas.get_tk_widget().pack(fill=tk.BOTH, expand=True)
|
||||
|
||||
# Initialize lines for fast updates
|
||||
lines = {ch: ax.step(time_data, data[ch], where="post")[0] for ch in input_channels}
|
||||
lines = {}
|
||||
for ch in input_channels:
|
||||
label = f"Digital In {ch}"
|
||||
lines[ch] = ax.step(time_data, data[ch], where="post", label=label)[0]
|
||||
|
||||
ax.legend() # Show legend
|
||||
|
||||
def update_plot():
|
||||
if not updating_enabled:
|
||||
frame.after(NOT_ACTIVE_CHECK_INTERVAL, update_plot)
|
||||
frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_plot)
|
||||
return
|
||||
|
||||
# Shift existing data left
|
||||
@ -51,13 +65,14 @@ def create_digital_plot_tab(notebook):
|
||||
lines[ch].set_ydata(data[ch])
|
||||
|
||||
canvas.draw_idle() # More efficient than draw()
|
||||
frame.after(DIGITAL_PLOT_UPDATE_INTERVAL, update_plot)
|
||||
frame.after(DIGITAL_PLOT_UPDATE_DELAY_MS, update_plot)
|
||||
|
||||
update_plot()
|
||||
|
||||
|
||||
|
||||
def set_updating_enabled(is_active):
|
||||
global updating_enabled
|
||||
updating_enabled = is_active
|
||||
print(f"digital_plot tab: set updating_enabled to {updating_enabled}")
|
||||
if DEBUG: print(f"digital_plot tab: set updating_enabled to {updating_enabled}")
|
||||
|
||||
|
||||
@ -49,25 +49,26 @@ ADC_SPI_CS_PIN = 8 # SPI Chip Select for MCP3208
|
||||
# SCLK_0: GPIO_11
|
||||
# CE_0: GPIO# MCP3208 (ADC)
|
||||
|
||||
# Pin mappings for Terminal number to actual ADC channels (due to routing they do not match)
|
||||
ADC_CHANNELS = {
|
||||
0: 1, # Terminal 0 = ADC channel 1
|
||||
1: 0, # Terminal 1 = ADC channel 0
|
||||
2: 3, # ...
|
||||
3: 2,
|
||||
4: 5,
|
||||
5: 4,
|
||||
6: 7,
|
||||
7: 6
|
||||
# Pin mappings for Terminal number to actual ADC channels, including max voltage range
|
||||
ADC_TERMINALS = {
|
||||
0: {"adc_channel": 1, "max_value": 3.3, "unit": "V"}, # Terminal 0 -> ADC channel 1, max 3.3V
|
||||
1: {"adc_channel": 0, "max_value": 3.3, "unit": "V"}, # Terminal 1 -> ADC channel 0, max 3.3V
|
||||
2: {"adc_channel": 3, "max_value": 5, "unit": "V"}, # Terminal 2 -> ADC channel 3, max 5V
|
||||
3: {"adc_channel": 2, "max_value": 5, "unit": "V"},
|
||||
4: {"adc_channel": 5, "max_value": 12, "unit": "V"},
|
||||
5: {"adc_channel": 4, "max_value": 24, "unit": "V"},
|
||||
6: {"adc_channel": 7, "max_value": 20, "unit": "mA"}, # Terminal 6 -> ADC channel 7, max 20mA
|
||||
7: {"adc_channel": 6, "max_value": 20, "unit": "mA"},
|
||||
}
|
||||
|
||||
|
||||
# Alternative to ADC_CHANNELS list have separate constants for the channels (more intuitive)
|
||||
ADC_CHANNEL_T0__0_TO_3V3 = 1
|
||||
ADC_CHANNEL_T1__0_TO_3V3 = 0
|
||||
ADC_CHANNEL_T2__0_TO_5V = 3
|
||||
ADC_CHANNEL_T3__0_TO_5V = 2
|
||||
ADC_CHANNEL_T4__0_TO_12V = 5
|
||||
ADC_CHANNEL_T5__0_TO_12V = 4
|
||||
ADC_CHANNEL_T5__0_TO_24V = 4
|
||||
ADC_CHANNEL_T6__0_TO_20MA = 7
|
||||
ADC_CHANNEL_T7__0_TO_20MA = 6
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user