Update pcbs + exports: Add final notes, minor optimizations during testing

Merge branch 'dev/rpi-scripts' - python example scipts + GUI work on the RPI
Update Readme: Add photos of GUI, TOC
2025-02-04 09:09:06 +01:00 · 2025-02-04 09:03:26 +01:00 · 2025-02-04 08:57:15 +01:00 · 2025-02-03 16:27:32 +01:00 · 2025-02-03 12:49:52 +01:00 · 2025-01-31 11:36:07 +01:00
24 changed files with 223169 additions and 210844 deletions
--- a/.gitignore
+++ b/.gitignore
@ -23,3 +23,10 @@ fp-info-cache
 #freecad
 *.FCBak
 *.stl
+
+
+#vim
+*.swp
+
+#python
+__pycache__
--- a/README.md
+++ b/README.md
@ -1,4 +1,4 @@
-# Raspberry Pi Extension board
+# Raspberry Pi Extension Board

 A custom PLC-like system based on the Raspberry Pi.  
 With a custom interface board, a Raspberry Pi is extended with protected I/O, bus systems, analog inputs, and Relay or PWM outputs. All components, including a display, are housed in a custom-designed enclosure.  
@ -8,8 +8,32 @@ The project is intended for versatile use in prototyping and project development

 ---

+# TOC
+- [Photos](#photos)
+- [Repository Content](#repository-content)
+- [Features Overview](#features-overview)
+- [Designed PCBs](#designed-pcbs)
+  * [1. Raspberry Pi Interface Board](#1-raspberry-pi-interface-board)
+  * [2. **Power Supply Board**](#2---power-supply-board--)
+  * [3. **LED Boards**](#3---led-boards--)
+- [Raspberry Pi Usage](#raspberry-pi-usage)
+  * [Connectivity](#connectivity)
+    + [LAN Connection (Ethernet)](#lan-connection--ethernet-)
+    + [WiFi Connection](#wifi-connection)
+    + [SSH Access](#ssh-access)
+    + [Remote Desktop (RDP)](#remote-desktop--rdp-)
+    + [Mount Raspberry Pi Filesystem in Windows (SAMBA)](#mount-raspberry-pi-filesystem-in-windows--samba-)
+- [Python Scripting](#python-scripting)
+  * [Running Python Examples](#running-python-examples)
+  * [Starting a New Python Project with I/O Access](#starting-a-new-python-project-with-i-o-access)
+  * [GUI Interface](#gui-interface)
+- [Housing](#housing)
+- [Dropped Features](#dropped-features)

-### Photo of all hardware components
+
+
+# Photos
+### Photo of all Hardware Components
 <p align="center">
  <img src="doc/photos/all-components.jpg" alt="All Components (Disassembled)" width="75%"/>
 </p>
@ -21,7 +45,7 @@ The project is intended for versatile use in prototyping and project development
 # Repository Content
 - **KiCad Projects**: 3 KiCad projects with schematics and PCB layouts for the custom PCBs created.
 - **Housing**: Custom enclosure design for PCBs and Raspberry Pi created in FreeCAD.
- **Software/Firmware**: Python scripts for operating and testing the PCB features (WIP).
+- **Software/Firmware**: Python scripts run on the Raspberry Pi for operating and testing the PCB features and providing examples as base for future projects.


 ---
@ -42,7 +66,7 @@ Detailed features of each PCB are described in the respective sections below.

 # Designed PCBs

-## 1. **Raspberry Pi Interface Board**
+## 1. Raspberry Pi Interface Board
 This board connects to the Raspberry Pi via a 40-pin ribbon cable and provides protected GPIO extensions and versatile input/output features.

 ### Photo
@ -51,7 +75,7 @@ This board connects to the Raspberry Pi via a 40-pin ribbon cable and provides p
 ### Features
 **Inputs**:
 - **8x Digital Inputs**:
-  - Wide continuous voltage range (-1.7 V to 120 V), idea: compatible with 3 V and 24 V devices.
+  - Wide voltage range (-1.7 V to 120 V) → compatible with 3 V and 24 V devices.
  - TVS diodes for ESD and spike protection.
  - Reverse polarity protection.
  - Isolated with optocouplers.
@ -74,7 +98,7 @@ This board connects to the Raspberry Pi via a 40-pin ribbon cable and provides p
 - 8x digital outputs (via shift register):
  - Low-power (30 mA push-pull) and high-power (500 mA open-drain) outputs.
  - Buzzer and relays connected to channels 6-8, with enable/disable switches.
-  - Note: Outputs are **not short-circuit proof**.
+  - **Note**: Outputs are **not short-circuit proof**.

 **General**:
 - WAGO spring-loaded terminals for easy wiring.
@ -85,7 +109,7 @@ This board connects to the Raspberry Pi via a 40-pin ribbon cable and provides p
 - UART (unprotected).
 - I2C (TVS diodes, 2.2 kΩ pull-ups).
 - SPI (unprotected).
-Note: Either RS485 or UART can be used at the same time (select with jumpers).
+  - **Note**: RS485 and UART cannot be used simultaneously (select via jumpers).

 ### Schematic and Layout
 <p align="center">
@ -160,29 +184,190 @@ Small PCBs with LEDs, resistors, and mounting holes for housing indicators.
 </p>


---
-
-
-# Software/Firmware
-Python code for operating the extension PCBs (e.g., GPIO pins, shift registers, ADC, and bus communication). This section is a work in progress (WIP), and example scripts will be added as development continues.
-
+<br>

 ---

+<br>
+
+# Raspberry Pi Usage
+
+## Connectivity
+The Raspberry Pi can operate **standalone** with a connected keyboard, mouse, and HDMI monitor, or by using the integrated display in the housing.  
+
+However, for **development**, it is recommended to connect it to a network via **WiFi or LAN**, allowing easy remote access from a laptop. A direct **Ethernet connection** between the Raspberry Pi and a laptop is often the simplest method.
+
+### LAN Connection (Ethernet)
+- **Connection**: Connect cable directly between raspberry and PC
+- **Configure the PC interface**: Set a static ip address e.g. `192.168.1.1/24`  
+  Note: Optionally also enable network sharing to enable the RPI to use the internet connection the PC currently has.
+- **Configure the Raspberry Interface**: Set a static ip address e.g. `192.168.1.100/24`  
+  The Raspberry Pi can be configured for **Ethernet access** using different methods:
+  - **Boot Partition Configuration:** Modify `cmdline.txt` on the SD card.
+  - **GUI Setup:** Use the built-in network manager if a monitor is connected.
+  - **Command Line (`nmcli`)**: Configure networking via the terminal.  
+
+To check the assigned IP run:
+```bash
+ip a
+```
+
+### WiFi Connection
+Probably the **fastest and easiest** way to set up communication between the Raspberry Pi and a PC - while even maintaining internet access - is to **use a mobile phone as a WiFi hotspot**.  
+Simply **connect both the Raspberry Pi and the laptop** to the same hotspot.
+
+To connect to a WiFi network, use:
+```bash
+nmcli device wifi connect <SSID> password <password>
+```
+Replace `<SSID>` and `<password>` with the actual credentials.  
+The Raspberry Pi will **automatically reconnect** after a reboot.  
+ 
+Once connected, you can check the assigned IP on the Raspberry Pi using:
+ ```
+ ip a
+ ```
+
+### SSH Access
+For remote terminal access, connect via SSH from a laptop:
+```bash
+ssh pi@192.168.1.100
+```
+Replace the IP with the actual address of the Raspberry Pi.
+
+### Remote Desktop (RDP)
+To control the Raspberry Pi’s **GUI remotely**, RDP is pre-configured.
+
+#### Connect via Windows Remote Desktop:
+- Open **Remote Desktop Connection (mstsc)**.
+- Enter the Raspberry Pi’s IP address.
+- **Login:**  
+  - **User:** `root`  
+  - **Password:** (configured during setup)  
+  - **Note:** Logging in as `pi` may result in a black screen.
+
+#### Alternatively, use PowerShell:
+```powershell
+mstsc /v:192.168.1.100:3389
+```
+
+### Mount Raspberry Pi Filesystem in Windows (SAMBA)
+For convenient file access and editing (e.g., with **VS Code**), the Raspberry Pi’s `/home/pi` directory can be **mounted as a network drive** using Samba.
+
+#### Steps:
+1. Determine the Raspberry Pi’s IP address:
+   ```bash
+   ip a
+   ```
+2. Mount the `/home/pi` directory in Windows:
+   ```powershell
+   net use X: \\192.168.1.100\pi /user:pi
+   ```
+   Replace `192.168.1.100` with the actual IP address.
+
+**Note:**  
+Currently, only `/home/pi` is available for mounting. To share additional directories, edit the Samba configuration file:
+```bash
+# add a new `[share]` section with the desired folder path and permissions.
+sudo nano /etc/samba/smb.conf
+# then restart samba
+sudo systemctl restart smbd
+```
+
+
+<br>
+
+---
+
+<br>
+
+
+# Python Scripting
+All **terminal-to-pin assignments** are mapped in [`interface_board_pins.py`](rpi-scripts/interface_board_pins.py), allowing easy reference to terminal numbers labeled on the housing.  
+
+Example scripts demonstrating I/O control can be found in [`rpi-scripts/examples`](rpi-scripts/examples).
+
+---
+
+## Running Python Examples
+Pre-written **Python scripts** to control I/O terminals are located in:
+```
+rpi-scripts/examples
+```
+To run an example, execute:
+```bash
+cd /home/pi/git/rpi-interface-board/rpi-scripts/examples/
+python read_digital_inputs.py
+```
+
+---
+
+## Starting a New Python Project with I/O Access
+To create a custom Python project using the **interface board**, follow these steps:
+
+1. **Copy the entire `rpi-scripts/` folder** to your new project directory.
+2. **Remove unnecessary files**, keeping at least:
+   - `rpi-scripts/interface_board_libs/` → contains custom drivers.
+   - `rpi-scripts/interface_board_pins.py` → maps terminal numbers to GPIO/ADC channels.
+3. **Start coding** by modifying an existing example in `examples/`.
+
+---
+
+## GUI Interface
+A **Python GUI** is available for **real-time monitoring** and **control** of all I/O terminals for quick testing.  
+Currently it auto starts after boot and shows on the integrated display in fullscreen mode.
+
+### Run the GUI
+```bash
+cd rpi-scripts/gui
+python main.py
+```
+
+### Enable GUI Autostart on Boot
+The GUI is configured to start automatically on boot in **fullscreen mode**. To modify this behavior:
+
+#### Enable autostart:
+```bash
+sudo cp rpi-scripts/gui/gui-start.service /etc/systemd/system/
+sudo systemctl enable gui-start.service
+```
+
+#### Disable autostart:
+```bash
+sudo systemctl disable gui-start.service
+```
+
+### GUI Screenshots
+<p align="center">
+  <img src="doc\graphics\GUI_tab-control.png" width="70%" />
+  <img src="doc\graphics\GUI_tab-adc-plot.png" width="70%" />
+  <img src="doc\graphics\GUI_tab-digital-plot.png" width="70%" />
+</p>
+
+
+<br>
+
+---
+
+<br>
+

 # Housing
 Custom-designed enclosure includes:
- Ports for Raspberry Pi.
- Banana sockets for power outputs.
- Exposed screw terminals.
- Openings for buttons and LEDs.
- Mounts for all PCBs and wiring.
-
+- Cutouts for all Ports for Raspberry Pi.
+- Mounting screws for all pcbs and Raspberry
+- Fan mount + venting slots
+- Cutouts for all external pcb terminals
+- Cutout + mounting arms (M2.5) for Display
 <img src="doc/graphics/3d-model_housing.png" width="80%" alt="3D Model"/>


+<br>
+
 ---

+<br>
+

 # Dropped Features
 The following ideas were considered but not implemented:
--- a/doc/graphics/GUI_tab-adc-plot.png
+++ b/doc/graphics/GUI_tab-adc-plot.png
--- a/doc/graphics/GUI_tab-control.png
+++ b/doc/graphics/GUI_tab-control.png
--- a/doc/graphics/GUI_tab-digital-plot.png
+++ b/doc/graphics/GUI_tab-digital-plot.png
--- a/pi-interface-board_v1.0/export/schematic_interface-board.pdf
+++ b/pi-interface-board_v1.0/export/schematic_interface-board.pdf
--- a/pi-interface-board_v1.0/export/schematic_interface-board.svg
+++ b/pi-interface-board_v1.0/export/schematic_interface-board.svg
--- a/pi-interface-board_v1.0/pi-interface-board_v1.0.kicad_pcb
+++ b/pi-interface-board_v1.0/pi-interface-board_v1.0.kicad_pcb
--- a/pi-interface-board_v1.0/pi-interface-board_v1.0.kicad_sch
+++ b/pi-interface-board_v1.0/pi-interface-board_v1.0.kicad_sch
@ -20682,8 +20682,8 @@
 		(uuid ba9864a2-9440-440d-9e0e-185ff1944daf)
 	)
 	(rectangle
-		(start 185.674 21.59)
-		(end 340.614 62.23)
+		(start 185.42 19.304)
+		(end 327.66 71.628)
 		(stroke
 			(width 0)
 			(type default)
@ -20742,7 +20742,7 @@
 		(uuid dd1f625c-0b44-4a09-8c25-a317aedb9dff)
 	)
 	(rectangle
-		(start 265.43 377.19)
+		(start 265.43 374.904)
 		(end 419.1 401.32)
 		(stroke
 			(width 0)
@ -20881,7 +20881,7 @@
 	)
 	(text "TODO Next Version:"
 		(exclude_from_sim no)
-		(at 187.96 27.94 0)
+		(at 186.944 24.384 0)
 		(effects
 			(font
 				(size 3 3)
@ -21187,9 +21187,9 @@
 		)
 		(uuid "84ac86f1-ded3-4c76-9073-63fc3cf06f2f")
 	)
-	(text "\n- Digital inputs: Isolate GND (separate GND terminal for opamp diodes) \n- Fixed voltage digital inputs (24V) with voltage divider + protection diode,\n     since some 24V sensors might consider 5V as low\n- Pulldown R analog input (currently leds randomly on when input unused)\n- UART: Add RX TX leds\n- Add diode to prevent backfeeding when USB supply connected too\n- Pin Assignment: Swap PWM1 with DIG-IN_4  so pwm outputs are on \n  different RPI pwm-channels if thats an issue"
+	(text "\n- Digital inputs: Isolate GND (separate GND terminal for opamp diodes) \n- Fixed voltage digital inputs (24V) with voltage divider + protection diode,\n     since some 24V sensors might consider 5V as low\n- Pulldown R analog input (currently leds randomly on when input unused)\n- UART: Add RX TX leds\n- Add diode to prevent backfeeding when USB supply connected too\n- Pin Assignment: Swap PWM1 with DIG-IN_4  so pwm outputs are on \n  different RPI pwm-channels if thats an issue\n- Re-evaluate LED board open drain outputs (8x DO, 2x PWM): \n  When connecting large voltage e.g. 48V motor \n  the led reverse voltage might be too high in off state? \n  -> Add additional normal diode in series + use 5V?"
 		(exclude_from_sim no)
-		(at 188.214 43.688 0)
+		(at 188.468 47.498 0)
 		(effects
 			(font
 				(size 2.2 2.2)
@ -21199,7 +21199,7 @@
 		)
 		(uuid "8a94cde1-aaa6-43bd-af0b-e4bcab9cf597")
 	)
-	(text "- Footprint: Digital-in TVS diodes too large -> rotated footprint, increased drill dia\n- Footprint: Increased Pitch Buzzer\n- Footptint: Diodes PWM increased drill dia"
+	(text "- Footprint: Digital-in TVS diodes too large -> rotated footprint, increased drill dia\n- Footprint: Increased Pitch Buzzer\n- Footptint: Diodes PWM increased drill dia\n- Swap Labels for PWM1 <-> PWM2   and Relay1 <-> Relay2  \n   so order is from left to right in housing"
 		(exclude_from_sim no)
 		(at 268.732 391.414 0)
 		(effects
@ -21213,7 +21213,7 @@
 	)
 	(text "Changelog since V0.1_milled:"
 		(exclude_from_sim no)
-		(at 267.97 383.032 0)
+		(at 268.732 379.476 0)
 		(effects
 			(font
 				(size 3 3)
@ -21593,7 +21593,7 @@
 		)
 		(uuid "0331c16b-5758-473f-a67b-2e002ab8e3c2")
 	)
-	(label "LED_relay-2"
+	(label "LED_relay-1"
 		(at 93.98 151.13 270)
 		(fields_autoplaced yes)
 		(effects
@ -21637,7 +21637,7 @@
 		)
 		(uuid "0ab8b66b-4d17-4fd5-a38b-f83f08b2ec0a")
 	)
-	(label "OUT_PWM_1"
+	(label "OUT_PWM_2"
 		(at 349.25 162.56 180)
 		(fields_autoplaced yes)
 		(effects
@ -21648,7 +21648,7 @@
 		)
 		(uuid "0bd5742d-7ba4-4479-a80c-1ee5cea413f8")
 	)
-	(label "OUT_PWM_2"
+	(label "OUT_PWM_1"
 		(at 201.93 134.62 0)
 		(fields_autoplaced yes)
 		(effects
@ -21714,7 +21714,7 @@
 		)
 		(uuid "185f1f17-890a-4f10-9a7c-2f0767033a4c")
 	)
-	(label "OUT_Relay_2"
+	(label "OUT_Relay_1"
 		(at 81.28 176.53 0)
 		(fields_autoplaced yes)
 		(effects
@ -21736,7 +21736,7 @@
 		)
 		(uuid "19d2fdf1-c2eb-4766-8ad7-9a50b1939595")
 	)
-	(label "OUT_Relay_1"
+	(label "OUT_Relay_2"
 		(at 24.13 176.53 0)
 		(fields_autoplaced yes)
 		(effects
@ -21780,7 +21780,7 @@
 		)
 		(uuid "1ff60aa4-0d81-4339-b49d-3fd2ff5efbe0")
 	)
-	(label "LED_relay-1"
+	(label "LED_relay-2"
 		(at 36.83 151.13 270)
 		(fields_autoplaced yes)
 		(effects
@ -21824,7 +21824,7 @@
 		)
 		(uuid "275fa1ae-c507-47b7-8fa7-a3cc9eac96ba")
 	)
-	(label "OUT_PWM_1"
+	(label "OUT_PWM_2"
 		(at 22.86 241.3 0)
 		(fields_autoplaced yes)
 		(effects
@ -22044,7 +22044,7 @@
 		)
 		(uuid "4b9f7c68-4da1-4f54-825b-8a53798277d6")
 	)
-	(label "OUT_Relay_1"
+	(label "OUT_Relay_2"
 		(at 168.91 370.84 180)
 		(fields_autoplaced yes)
 		(effects
@ -22352,7 +22352,7 @@
 		)
 		(uuid "7ec43d3d-7313-4c06-bb36-68e6a49f56d3")
 	)
-	(label "OUT_Relay_2"
+	(label "OUT_Relay_1"
 		(at 168.91 375.92 180)
 		(fields_autoplaced yes)
 		(effects
@ -22836,7 +22836,7 @@
 		)
 		(uuid "c4bca113-1b1e-4671-b975-22570e208d4b")
 	)
-	(label "LED_relay-2"
+	(label "LED_relay-1"
 		(at 149.86 149.86 270)
 		(fields_autoplaced yes)
 		(effects
@ -23067,7 +23067,7 @@
 		)
 		(uuid "f741a6a5-d2bb-45d2-aea4-c5e8655f8408")
 	)
-	(label "LED_relay-1"
+	(label "LED_relay-2"
 		(at 152.4 149.86 270)
 		(fields_autoplaced yes)
 		(effects
@ -23111,7 +23111,7 @@
 		)
 		(uuid "fc1b143a-8bbf-4f06-bd8c-7ca0267ec646")
 	)
-	(label "OUT_PWM_2"
+	(label "OUT_PWM_1"
 		(at 22.86 251.46 0)
 		(fields_autoplaced yes)
 		(effects
@ -28773,7 +28773,7 @@
 				(justify right)
 			)
 		)
-		(property "Value" "Relay1"
+		(property "Value" "Relay2"
 			(at 70.866 143.51 90)
 			(effects
 				(font
@ -36917,7 +36917,7 @@
 				(justify right)
 			)
 		)
-		(property "Value" "PWM1"
+		(property "Value" "PWM2"
 			(at 169.164 226.314 90)
 			(effects
 				(font
@ -37123,7 +37123,7 @@
 				(justify right)
 			)
 		)
-		(property "Value" "PWM2"
+		(property "Value" "PWM1"
 			(at 169.164 261.874 90)
 			(effects
 				(font
@ -38202,7 +38202,7 @@
 				(justify right)
 			)
 		)
-		(property "Value" "Relay2"
+		(property "Value" "Relay1"
 			(at 128.016 143.256 90)
 			(effects
 				(font
--- a/power-supply-board_v1.0/power-supply-board_v1.0.kicad_pcb
+++ b/power-supply-board_v1.0/power-supply-board_v1.0.kicad_pcb
@ -43313,7 +43313,7 @@
 		)
 	)
 	(gr_text "FIXME: Power supply barrel connector wrong polarity -> reroute"
-		(at 94.05 133.4 0)
+		(at 94.91 137.52 0)
 		(layer "Cmts.User")
 		(uuid "d06dcb3d-61f7-46b5-ab9d-a35c29a9f224")
 		(effects
--- a/rpi-scripts/examples/pass_through_inputs_to_outputs.py
+++ b/rpi-scripts/examples/pass_through_inputs_to_outputs.py
@ -0,0 +1,64 @@
+import os
+import sys
+import time
+import RPi.GPIO as GPIO
+
+
+
+# Import pin assignments and custom libraries
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_pins import GPIO_DIGITAL_INPUTS  # Input GPIO mapping
+from interface_board_pins import (  # Shift register pin assignment
+    GPIO_SHIFT_REG_DATA,
+    GPIO_SHIFT_REG_LATCH,
+    GPIO_SHIFT_REG_CLOCK,
+)
+from interface_board_libs.shift_register import ShiftRegister  # Custom shift register class
+
+
+
+# Initialize GPIO for digital inputs
+GPIO.setmode(GPIO.BCM)
+for pin in GPIO_DIGITAL_INPUTS.values():
+    print(f"Configuring GPIO pin {pin} as input")
+    GPIO.setup(pin, GPIO.IN)
+
+
+
+# Initialize shift register
+sr = ShiftRegister(GPIO_SHIFT_REG_DATA, GPIO_SHIFT_REG_LATCH, GPIO_SHIFT_REG_CLOCK)
+
+
+
+# Main loop: Read inputs and write to shift register
+print("\nStarting passthrough mode: Digital inputs → Shift register outputs")
+try:
+    while True:
+        shift_register_value = 0  # Byte to be written to the shift register
+        print("\nReading inputs and updating shift register...")
+
+        for i, (label, pin) in enumerate(GPIO_DIGITAL_INPUTS.items()):
+            state = GPIO.input(pin)  # Read GPIO state
+            print(f"Input {label} (GPIO {pin}): {'HIGH' if state else 'LOW'}")
+
+            # Set corresponding bit in shift register byte
+            if state:
+                shift_register_value |= (1 << i)  # Set bit at position `i`
+            else:
+                shift_register_value &= ~(1 << i)  # Clear bit at position `i`
+
+        # Write the final byte to the shift register
+        sr.write_byte(shift_register_value)
+        print(f"Shift Register Output: {format(shift_register_value, '08b')[::-1]}") # Print binary representation (mirrored, lsb first = terminal order)
+
+        time.sleep(0.3)  # Small delay to prevent excessive polling
+
+except KeyboardInterrupt:
+    print("\nExiting...")
+
+finally:
+    sr.clear()  # Clear shift register before exiting
+    print("Shift register cleared.")
+    GPIO.cleanup()  # Cleanup GPIO settings
+
--- a/rpi-scripts/examples/read_analog_inputs.py
+++ b/rpi-scripts/examples/read_analog_inputs.py
@ -0,0 +1,79 @@
+# Include external libraries
+import os
+import sys
+import time
+
+
+# Include custom files
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_libs.adc_mcp3208 import MCP3208 # custom driver for ADC-IC
+from interface_board_pins import ( 
+    # mapping of ADC channels to terminals + max value:
+    ADC_TERMINALS,
+    # mapping of ADC channels to terminals:
+    ADC_CHANNEL_T0__0_TO_3V3,
+    ADC_CHANNEL_T1__0_TO_3V3,
+    ADC_CHANNEL_T2__0_TO_5V,
+    ADC_CHANNEL_T3__0_TO_5V,
+    ADC_CHANNEL_T4__0_TO_12V,
+    ADC_CHANNEL_T5__0_TO_24V,
+    ADC_CHANNEL_T6__0_TO_20MA,
+    ADC_CHANNEL_T7__0_TO_20MA,
+) # mapping of ADC channels to terminals
+
+
+# create ADC instance 
+adc = MCP3208()
+
+
+
+# local helper function to scale the adc value to an actual voltage
+def adc2value(adc_value, max_value):
+    max_adc = 4095
+    return adc_value * max_value / max_adc
+
+
+
+
+while True:
+        print("-" * 40)  
+
+        # Read all available channels in a loop according to terminal order / map
+        values = []
+        for terminal, config in ADC_TERMINALS.items():
+            adc_channel = config["adc_channel"]
+            max_value = config["max_value"]
+            value = adc.read(adc_channel)
+            print(f"T{terminal}: ADC={value:04d}  => U_ADC = {adc2value(value, max_value):5.3f}V")
+        
+
+        # Read channels one by one using defined constants (more intuitive)
+        print("-" * 40)  
+        value = adc.read(ADC_CHANNEL_T0__0_TO_3V3)  
+        print(f"Terminal 0 (0 to 3.3V): ADC={value:04d} => Terminal={adc2value(value, 3.3):4.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T1__0_TO_3V3)  
+        print(f"Terminal 1 (0 to 3.3V): ADC={value:04d} => Terminal={adc2value(value, 3.3):4.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T2__0_TO_5V)  
+        print(f"Terminal 2 (0 to 5V):   ADC={value:04d} => Terminal={adc2value(value, 5):4.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T3__0_TO_5V)  
+        print(f"Terminal 3 (0 to 5V):   ADC={value:04d} => Terminal={adc2value(value, 5):4.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T4__0_TO_12V)  
+        print(f"Terminal 4 (0 to 12V):  ADC={value:04d} => Terminal={adc2value(value, 12):05.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T5__0_TO_24V)  
+        print(f"Terminal 5 (0 to 24V):  ADC={value:04d} => Terminal={adc2value(value, 24):05.2f}V")  
+
+        value = adc.read(ADC_CHANNEL_T6__0_TO_20MA)  
+        print(f"Terminal 6 (0 to 20mA): ADC={value:04d} => Terminal={adc2value(value, 20):05.2f}mA")  
+
+        value = adc.read(ADC_CHANNEL_T7__0_TO_20MA)  
+        print(f"Terminal 7 (0 to 20mA): ADC={value:04d} => Terminal={adc2value(value, 20):05.2f}mA")  
+
+        print("-" * 40)  
+        time.sleep(1)  # Delay before next read cycle  
+
--- a/rpi-scripts/examples/read_digital_inputs.py
+++ b/rpi-scripts/examples/read_digital_inputs.py
@ -0,0 +1,37 @@
+import os
+import sys
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+# Include the common pin assignment (from parent folder)
+from interface_board_pins import GPIO_DIGITAL_INPUTS # map of which GPIO pins are associated with which input terminal (1-8)
+
+import RPi.GPIO as GPIO
+import time
+
+
+
+# Initialize GPIO
+GPIO.setmode(GPIO.BCM)
+for pin in GPIO_DIGITAL_INPUTS.values():
+    print(f"configuring pin {pin} as input")
+    GPIO.setup(pin, GPIO.IN)
+
+
+
+# Repeatedly read GPIOs
+print("Reading digital inputs:")
+try:
+    while True:
+        print("reading all gpio pins...")
+        for label, pin in GPIO_DIGITAL_INPUTS.items():
+            print(f"reading pin {pin}")
+            state = GPIO.input(pin)
+            print(f"Input {label} (GPIO {pin}): {'HIGH' if state else 'LOW'}")
+        print("-" * 40)
+        time.sleep(0.5)
+
+except KeyboardInterrupt:
+    print("Exiting...")
+
+finally:
+    GPIO.cleanup()
--- a/rpi-scripts/examples/write_digital_outputs_shift_reg.py
+++ b/rpi-scripts/examples/write_digital_outputs_shift_reg.py
@ -0,0 +1,82 @@
+# Include external libraries
+import os
+import sys
+import RPi.GPIO as GPIO
+from time import sleep
+
+
+# Include custom files
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_libs.shift_register import ShiftRegister # custom shift register class
+from interface_board_pins import ( # pin / channel assignment
+    GPIO_SHIFT_REG_DATA,
+    GPIO_SHIFT_REG_LATCH,
+    GPIO_SHIFT_REG_CLOCK,
+    SHIFT_REG_CHANNEL_BUZZER,
+    SHIFT_REG_CHANNEL_RELAY1,
+    SHIFT_REG_CHANNEL_RELAY2,
+)
+
+
+
+# Config
+COUNT_UP_TEST_ENABLED = False
+DELAY_COUNT_UP = 0.008
+DELAY_TOGGLE = 0.3
+
+
+# Initialize the shift register
+sr = ShiftRegister(GPIO_SHIFT_REG_DATA, GPIO_SHIFT_REG_LATCH, GPIO_SHIFT_REG_CLOCK)
+
+try:
+    print("Writing to shift register...")
+
+
+    # repeatedly write to shift register
+    while True:
+        # Cycle through all combinations of pin states (write entire byte)
+        if COUNT_UP_TEST_ENABLED:
+            print("Writing all byte values (0-255)...")
+            for value in range(256):
+                sr.write_byte(value)  # Write the current value
+                print(f"Output: {'{0:08b}'.format(value)}")  # Print binary representation
+                sleep(DELAY_COUNT_UP)  # Delay between each byte
+
+            sleep(0.5)
+            sr.clear()  # Clear the shift register
+
+
+        # Turn each pin on and off one by one
+        print("\nToggling each pin one by one...")
+        # channels 0-2 are connected to buzzer and relays:
+        print(f"Num {SHIFT_REG_CHANNEL_BUZZER}: Toggling buzzer...") # channel 0
+        sr.set_pin(SHIFT_REG_CHANNEL_BUZZER, True)  # Turn buzzer ON
+        sleep(DELAY_TOGGLE)
+        sr.set_pin(SHIFT_REG_CHANNEL_BUZZER, False)  # Turn buzzer OFF
+
+        print(f"Num {SHIFT_REG_CHANNEL_RELAY1}: Toggling Relay 1...") # channel 1
+        sr.toggle_pin(SHIFT_REG_CHANNEL_RELAY1)
+        sleep(DELAY_TOGGLE)
+        sr.toggle_pin(SHIFT_REG_CHANNEL_RELAY1)
+
+        print(f"Num {SHIFT_REG_CHANNEL_RELAY2}: Toggling Relay 2...") # channel 2
+        sr.set_pin(SHIFT_REG_CHANNEL_RELAY2, True)  # Turn relay ON
+        sleep(DELAY_TOGGLE)
+        sr.set_pin(SHIFT_REG_CHANNEL_RELAY2, False)  # Turn relay OFF
+
+
+        # channels 3-7 are connected to terminals only (no dedicated device on pcb):
+        for pin in range(3,8): # 3-7 are connected to terminal only
+            print(f"Num: {pin}: Toggling Terminal")
+            sr.set_pin(pin, True)  # Set the pin HIGH
+            sleep(DELAY_TOGGLE)
+            #print(f"Setting pin {pin} LOW.")
+            sr.set_pin(pin, False)  # Set the pin LOW
+            #sleep(0.5)
+
+
+finally:
+    sr.clear()  # Clear the shift register
+    print("Shift register cleared.")
+    GPIO.cleanup()  # Clean up GPIO settings
--- a/rpi-scripts/examples/write_pwm_outputs.py
+++ b/rpi-scripts/examples/write_pwm_outputs.py
@ -0,0 +1,76 @@
+# Include external libraries
+import os
+import sys
+import RPi.GPIO as GPIO
+from time import sleep
+
+
+# Include custom files
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_pins import ( # pin / channel assignment
+    GPIO_PWM1,  # RPI_PWM0
+    GPIO_PWM2  # RPI_PWM0 too
+)
+
+
+
+# Config
+BLINK_ONLY = False
+
+
+
+# PWM Settings
+FREQ = 1000  # PWM frequency in Hz
+STEP = 2     # Step size for fading
+DELAY = 0.03  # Delay between steps
+
+try:
+    print("Configuring PWM pins...")
+    GPIO.setmode(GPIO.BCM)
+    GPIO.setup(GPIO_PWM1, GPIO.OUT)
+    GPIO.setup(GPIO_PWM2, GPIO.OUT)
+
+
+    if BLINK_ONLY:
+        while True:
+            print(f"PWM1 ON (GPIO {GPIO_PWM1})")
+            GPIO.output(GPIO_PWM1, 1)
+            sleep(2)
+            print("PWM1 OFF")
+            GPIO.output(GPIO_PWM1, 0)
+            print(f"PWM2 ON (GPIO {GPIO_PWM2})")
+            GPIO.output(GPIO_PWM2, 1)
+            sleep(2)
+            print("PWM2 OFF")
+            GPIO.output(GPIO_PWM2, 0)
+
+
+    # Initialize PWM on both pins
+    pwm1 = GPIO.PWM(GPIO_PWM1, FREQ)
+    pwm2 = GPIO.PWM(GPIO_PWM2, FREQ)
+    
+    pwm1.start(0)  # Start with 0% duty cycle
+    pwm2.start(100)  # Start with 100% duty cycle
+
+    print("Starting PWM fade effect...")
+    while True:
+        # Fade up PWM1 and fade down PWM2
+        for duty in range(0, 101, STEP):  # Duty cycle from 0% to 100%
+            pwm1.ChangeDutyCycle(duty)
+            pwm2.ChangeDutyCycle(100 - duty)  # Opposite fade
+            print(f"PWM1: {duty}%  |  PWM2: {100 - duty}%")
+            sleep(DELAY)
+
+        # Fade down PWM1 and fade up PWM2
+        for duty in range(100, -1, -STEP):  # Duty cycle from 100% to 0%
+            pwm1.ChangeDutyCycle(duty)
+            pwm2.ChangeDutyCycle(100 - duty)  # Opposite fade
+            print(f"PWM1: {duty}%  |  PWM2: {100 - duty}%")
+            sleep(DELAY)
+
+finally:
+    print("Exiting, stopping PWM and cleaning up...")
+    pwm1.stop()
+    pwm2.stop()
+    GPIO.cleanup()  # Clean up GPIO settings
--- a/rpi-scripts/gui/gui-start.service
+++ b/rpi-scripts/gui/gui-start.service
@ -0,0 +1,24 @@
+# systemd service file for auto starting the python gui 
+# at the correct time after startup (when window manager finished starting)
+
+
+# Usage:
+#  - Install: `sudo cp rpi-scripts/gui/gui-start.service /etc/systemd/system/`
+#  - Enable autostart:  `sudo systemctl enable gui-start.service`
+#  - Disable autostart: `sudo systemctl disable gui-start.service`
+
+[Unit]
+Description=Start Python GUI for IO-control and monitoring after startup
+After=display-manager.service
+Wants=display-manager.service
+
+[Service]
+Environment=DISPLAY=:0
+ExecStart=/usr/bin/python3 /home/pi/git/rpi-interface-board/rpi-scripts/gui/main.py
+WorkingDirectory=/home/pi/git/rpi-interface-board/rpi-scripts/gui
+User=pi
+Group=pi
+Restart=always
+
+[Install]
+WantedBy=default.target
--- a/rpi-scripts/gui/main.py
+++ b/rpi-scripts/gui/main.py
@ -0,0 +1,90 @@
+import os
+import sys
+import time
+import tkinter as tk
+from tkinter import ttk
+from tkinter import messagebox
+import RPi.GPIO as GPIO
+
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_libs.adc_mcp3208 import MCP3208
+from interface_board_libs.shift_register import ShiftRegister
+from interface_board_pins import *  # Import pin assignments
+from tab_control import create_control_tab
+from tab_control import set_updating_enabled as tab_control__set_updating_enabled
+from tab_adc_plot import create_adc_plot_tab
+from tab_adc_plot import set_updating_enabled as tab_analog_plot__set_updating_enabled
+from tab_digital_plot import create_digital_plot_tab
+from tab_digital_plot import set_updating_enabled as tab_digital_plot__set_updating_enabled
+from tab_exit import create_exit_tab
+
+
+# Initialize ADC & Shift Register
+adc = MCP3208()
+shift_reg = ShiftRegister(GPIO_SHIFT_REG_DATA, GPIO_SHIFT_REG_LATCH, GPIO_SHIFT_REG_CLOCK)
+
+
+# GPIO Setup
+GPIO.setmode(GPIO.BCM)
+for pin in GPIO_DIGITAL_INPUTS.values():
+    GPIO.setup(pin, GPIO.IN)
+GPIO.setup(GPIO_PWM1, GPIO.OUT)
+GPIO.setup(GPIO_PWM2, GPIO.OUT)
+pwm1 = GPIO.PWM(GPIO_PWM1, 1000)
+pwm2 = GPIO.PWM(GPIO_PWM2, 1000)
+pwm1.start(0)
+pwm2.start(0)
+
+
+# Tkinter GUI
+root = tk.Tk()
+root.title("Raspberry Pi Interface Board")
+root.attributes('-fullscreen', True)
+root.configure(bg="black")
+
+
+# Tabbed Interface
+notebook = ttk.Notebook(root)
+notebook.pack(expand=True, fill="both")
+
+
+# Track active tab
+def on_tab_change(event):
+    active_tab = event.widget.tab(event.widget.index("current"), "text")
+    print (f"INFO: switched to tab {active_tab}")
+    match active_tab:
+        case "ADC Plot":
+            tab_control__set_updating_enabled(False)
+            tab_analog_plot__set_updating_enabled(True)
+            tab_digital_plot__set_updating_enabled(False)
+        case "Digital Inputs":
+            tab_control__set_updating_enabled(False)
+            tab_analog_plot__set_updating_enabled(False)
+            tab_digital_plot__set_updating_enabled(True)
+        case "Controls":
+            tab_control__set_updating_enabled(True)
+            tab_analog_plot__set_updating_enabled(False)
+            tab_digital_plot__set_updating_enabled(False)
+        case "EXIT":
+            pass
+        case _:
+            print(f"unhandled change to tab {active_tab}")
+
+notebook.bind("<<NotebookTabChanged>>", on_tab_change)
+
+
+# Add tabs
+create_control_tab(notebook, adc, shift_reg, pwm1, pwm2)
+create_adc_plot_tab(notebook, adc)
+create_digital_plot_tab(notebook)
+create_exit_tab(notebook, root, pwm1, pwm2)
+
+
+# Run GUI
+try:
+    root.mainloop()
+
+except KeyboardInterrupt:
+    print('Keyboard interrupt -> exiting')
+    exit()
--- a/rpi-scripts/gui/tab_adc_plot.py
+++ b/rpi-scripts/gui/tab_adc_plot.py
@ -0,0 +1,86 @@
+import sys
+import os
+import tkinter as tk
+from tkinter import ttk
+from matplotlib.figure import Figure
+from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg
+import time
+
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_pins import ADC_TERMINALS  # Import pin assignments
+
+
+# CONFIG
+ADC_PLOT_UPDATE_DELAY_MS = 50  # note: delay is additional to time it takes to update the chart
+TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000
+MAX_X_HISTORY_VALUES = 150
+AUTO_SCALE_ENABLED = True
+DEBUG = False
+
+
+# Variables
+updating_enabled = False
+adc_channels = list(range(8))
+data = {ch: [0] * MAX_X_HISTORY_VALUES for ch in adc_channels}  # Preallocate lists
+time_data = list(range(-MAX_X_HISTORY_VALUES, 0))  # Simulated time axis
+
+
+def create_adc_plot_tab(notebook, adc):
+    frame = ttk.Frame(notebook)
+    notebook.add(frame, text="ADC Plot")
+
+    figure = Figure(figsize=(8, 5), dpi=100)
+    ax = figure.add_subplot(1, 1, 1)
+
+    ax.set_title("ADC Inputs")  # Set title
+    ax.set_xlabel("Time (s)")  # X-axis label
+    ax.set_ylabel("Voltage / Current (V / mA)")  # Y-axis label
+
+    ax.set_xlim(-MAX_X_HISTORY_VALUES, 0)  # Keep time axis fixed
+    canvas = FigureCanvasTkAgg(figure, master=frame)
+    canvas.get_tk_widget().pack(fill=tk.BOTH, expand=True)
+
+    # Initialize lines for fast updates
+    lines = {}
+    for terminal, config in ADC_TERMINALS.items():
+        label = f"T{terminal} ({config['max_value']} {config['unit']})"  # Format: T1 (3.3V)
+        lines[terminal] = ax.plot(time_data, data[terminal], label=label)[0]
+
+    ax.legend()  # Show legend
+
+    def update_plot():
+        if not updating_enabled:
+            frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_plot)
+            return
+
+        for terminal, config in ADC_TERMINALS.items():
+            adc_channel = config["adc_channel"]
+            max_value = config["max_value"]
+            # Shift existing data left and
+            # read new data + scale based on the correct max voltage
+            data[terminal].pop(0)
+            data[terminal].append(round(adc.read(adc_channel) * max_value / 4095, 2))
+
+        # Recalculate limits (autoscale)
+        if AUTO_SCALE_ENABLED:
+            ax.set_ylim(bottom=0)  # Lower limit always 0
+            ax.autoscale(enable=True, axis='y', tight=False)  # Enable autoscale for upper limit
+            ax.relim()  # Recalculate limits
+            ax.autoscale_view(scalex=False, scaley=True)  # Autoscale only y-axis
+        else:
+            ax.set_ylim(0, 24)  # Fixed range if autoscale is disabled
+
+        for terminal in ADC_TERMINALS:
+            lines[terminal].set_ydata(data[terminal])
+
+        canvas.draw_idle()  # Efficient redraw
+        frame.after(ADC_PLOT_UPDATE_DELAY_MS, update_plot)
+
+    update_plot()
+
+
+def set_updating_enabled(is_active):
+    global updating_enabled
+    updating_enabled = is_active
+    if DEBUG: print(f"adc_plot tab: set updating_enabled to {updating_enabled}")
--- a/rpi-scripts/gui/tab_control.py
+++ b/rpi-scripts/gui/tab_control.py
@ -0,0 +1,141 @@
+import sys
+import os
+import tkinter as tk
+from tkinter import ttk
+import RPi.GPIO as GPIO
+
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_pins import *  # Import pin assignments
+
+
+# CONFIG
+ADC_VALUES_UPDATE_INTERVAL_MS = 500
+DIGITAL_INPUTS_UPDATE_INTERVAL_MS = 200
+TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000
+DEBUG = False
+
+
+# Variables
+updating_enabled = False
+
+
+def create_control_tab(notebook, adc, shift_reg, pwm1, pwm2):
+    frame = ttk.Frame(notebook)
+    notebook.add(frame, text="Controls")
+
+    digital_input_states = [tk.StringVar(value="LOW") for _ in range(8)]
+    digital_output_states = [tk.BooleanVar(value=False) for _ in range(8)]
+    adc_values = [tk.StringVar(value=" --- ") for _ in range(8)]
+    pwm_values = [tk.IntVar(value=0), tk.IntVar(value=0)]
+    output_buttons = {}  # Store button references to change colors
+
+
+    def update_inputs():
+        if not updating_enabled:
+            frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_inputs)
+            return
+        for i, pin in enumerate(GPIO_DIGITAL_INPUTS.values()):
+            digital_input_states[i].set("HIGH" if GPIO.input(pin) else "LOW")
+        frame.after(DIGITAL_INPUTS_UPDATE_INTERVAL_MS, update_inputs)
+
+
+    def update_adc():
+        if not updating_enabled:
+            frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_adc)
+            return
+
+        for terminal, config in ADC_TERMINALS.items():
+            adc_channel = config["adc_channel"]
+            max_value = config["max_value"]
+            unit = config["unit"]
+
+            # Read ADC value and scale to the correct voltage
+            value = adc.read(adc_channel)
+            adc_values[terminal].set(f"{value * max_value / 4095:4.2f} {unit}")
+
+        frame.after(ADC_VALUES_UPDATE_INTERVAL_MS, update_adc)
+
+
+    def toggle_output(index):
+        """ Toggle shift register output and update button color. """
+        new_state = not digital_output_states[index].get()
+        digital_output_states[index].set(new_state)
+        shift_reg.set_pin(index, new_state)
+
+        if index in output_buttons:
+            for btn in output_buttons[index]:
+                btn.configure(bg="green" if new_state else "red", activebackground="green" if new_state else "red")
+
+
+    style = ttk.Style()
+    style.configure("TScale", thickness=60)
+    style.configure("TButton", font=("Arial", 18), padding=5)
+
+    control_frame = ttk.Frame(frame, padding=40)
+    control_frame.grid(row=0, column=0, sticky="nsew")
+
+    frame.grid_rowconfigure(0, weight=1)
+    frame.grid_rowconfigure(1, weight=0)
+    frame.grid_columnconfigure(0, weight=1)
+
+    for i in range(8):
+        ttk.Label(control_frame, text=f"ADC-{i}: ", font=("Arial", 18)).grid(row=i, column=0, sticky="e")
+        ttk.Label(control_frame, textvariable=adc_values[i], width=10, font=("Arial", 18)).grid(row=i, column=1, sticky="w")
+        ttk.Label(control_frame, text=f"IN-{i}:", font=("Arial", 18)).grid(row=i, column=2, sticky="e", padx=20)
+        ttk.Label(control_frame, textvariable=digital_input_states[i], width=6, font=("Arial", 18)).grid(row=i, column=3, sticky="w")
+
+        btn = tk.Button(control_frame, text=f"OUT-{i}", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda i=i: toggle_output(i))
+        btn.grid(row=i, column=4, sticky="w", padx=20)
+
+        output_buttons.setdefault(i, []).append(btn)
+
+        if i == 0:
+            buzzer_btn = tk.Button(control_frame, text="BUZZER", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda: toggle_output(0))
+            buzzer_btn.grid(row=i, column=5, padx=20)
+            output_buttons[0].append(buzzer_btn)
+
+        if i == 1:
+            relay2_btn = tk.Button(control_frame, text="RELAY2", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda: toggle_output(1))
+            relay2_btn.grid(row=i, column=5, padx=20)
+            output_buttons[1].append(relay2_btn)
+
+        if i == 2:
+            relay1_btn = tk.Button(control_frame, text="RELAY1", font=("Arial", 16), width=10, bg="red", activebackground="red", command=lambda: toggle_output(2))
+            relay1_btn.grid(row=i, column=5, padx=20)
+            output_buttons[2].append(relay1_btn)
+
+    pwm_frame = ttk.Frame(frame, padding=20)
+    pwm_frame.grid(row=1, column=0, sticky="ew")
+
+    pwm_frame.columnconfigure(0, weight=0)
+    pwm_frame.columnconfigure(1, weight=1)
+    pwm_frame.columnconfigure(2, weight=0)
+    
+    pwm1_label = ttk.Label(pwm_frame, text="PWM-1:", font=("Arial", 18))
+    pwm1_label.grid(row=0, column=0, padx=20, sticky="e")
+    
+    pwm1_slider = ttk.Scale(
+        pwm_frame, from_=0, to=100, orient="horizontal", length=400, 
+        variable=pwm_values[0], command=lambda val: pwm1.ChangeDutyCycle(int(float(val)))
+    )
+    pwm1_slider.grid(row=0, column=1, columnspan=2, sticky="we", padx=10)
+    
+    pwm2_label = ttk.Label(pwm_frame, text="PWM-2:", font=("Arial", 18))
+    pwm2_label.grid(row=1, column=0, padx=20, sticky="e")
+    
+    pwm2_slider = ttk.Scale(
+        pwm_frame, from_=0, to=100, orient="horizontal", length=400, 
+        variable=pwm_values[1], command=lambda val: pwm2.ChangeDutyCycle(int(float(val)))
+    )
+    pwm2_slider.grid(row=1, column=1, columnspan=2, sticky="we", padx=10)
+
+    update_inputs()
+    update_adc()
+
+
+
+def set_updating_enabled(is_active):
+    global updating_enabled
+    updating_enabled = is_active
+    if DEBUG: print(f"control tab: set updating_enabled to {updating_enabled}")
--- a/rpi-scripts/gui/tab_digital_plot.py
+++ b/rpi-scripts/gui/tab_digital_plot.py
@ -0,0 +1,78 @@
+import sys
+import os
+import threading
+import tkinter as tk
+from tkinter import ttk
+import RPi.GPIO as GPIO
+from matplotlib.figure import Figure
+from matplotlib.backends.backend_tkagg import FigureCanvasTkAgg
+import time
+# Add the parent directory to the module search path
+sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), "..")))
+from interface_board_pins import *  # Import pin assignments
+
+
+# CONFIG
+DIGITAL_PLOT_UPDATE_DELAY_MS = 50  # note: delay is additional to time it takes to update the chart
+TAB_NOT_ACTIVE_CHECK_INTERVAL_MS = 2000   # Check inactive tabs less frequently
+MAX_X_HISTORY_VALUES = 100         # Keep last 100 values for scrolling
+DEBUG = False
+
+
+# Variables
+updating_enabled = False  # Track if the tab is active
+input_channels = list(range(8))
+data = {ch: [0] * MAX_X_HISTORY_VALUES for ch in input_channels}  # Preallocate data
+time_data = list(range(-MAX_X_HISTORY_VALUES, 0))  # Simulated time axis
+
+
+def create_digital_plot_tab(notebook):
+    frame = ttk.Frame(notebook)
+    notebook.add(frame, text="Digital Inputs")
+
+    figure = Figure(figsize=(8, 5), dpi=100)
+    ax = figure.add_subplot(1, 1, 1)
+
+    ax.set_title("Digital Inputs")  # Set title
+    ax.set_xlabel("Time (s)")  # X-axis label
+    ax.set_ylabel("State (1=HIGH / 0=LOW)")  # Y-axis label
+
+    ax.set_ylim(-0.2, 1.2)
+    ax.set_xlim(-MAX_X_HISTORY_VALUES, 0)  # Keep time axis fixed
+    canvas = FigureCanvasTkAgg(figure, master=frame)
+    canvas.get_tk_widget().pack(fill=tk.BOTH, expand=True)
+
+    # Initialize lines for fast updates
+    lines = {}
+    for ch in input_channels:
+        label = f"Digital In {ch}"
+        lines[ch] = ax.step(time_data, data[ch], where="post", label=label)[0]
+
+    ax.legend()  # Show legend
+
+    def update_plot():
+        if not updating_enabled:
+            frame.after(TAB_NOT_ACTIVE_CHECK_INTERVAL_MS, update_plot)
+            return
+        
+        # Shift existing data left
+        for ch in input_channels:
+            data[ch].pop(0)
+            data[ch].append(GPIO.input(GPIO_DIGITAL_INPUTS[ch]))
+
+        # Update only the y-data for efficiency
+        for ch in input_channels:
+            lines[ch].set_ydata(data[ch])
+
+        canvas.draw_idle()  # More efficient than draw()
+        frame.after(DIGITAL_PLOT_UPDATE_DELAY_MS, update_plot)
+
+    update_plot()
+
+
+
+def set_updating_enabled(is_active):
+    global updating_enabled
+    updating_enabled = is_active
+    if DEBUG: print(f"digital_plot tab: set updating_enabled to {updating_enabled}")
+
--- a/rpi-scripts/gui/tab_exit.py
+++ b/rpi-scripts/gui/tab_exit.py
@ -0,0 +1,21 @@
+
+import tkinter as tk
+from tkinter import ttk
+
+def create_exit_tab(notebook, root, pwm1, pwm2):
+    frame = ttk.Frame(notebook)
+    notebook.add(frame, text="EXIT")
+
+    ttk.Label(frame, text="Exit the GUI", font=("Arial", 20)).pack(pady=20)
+    
+    def exit_program():
+        pwm1.stop()
+        pwm2.stop()
+        root.quit()
+        root.destroy()
+
+    exit_button = ttk.Button(frame, text="Exit Application", command=exit_program, style="TButton")
+    exit_button.pack(pady=20)
+
+    style = ttk.Style()
+    style.configure("TButton", font=("Arial", 18), padding=10)
--- a/rpi-scripts/interface_board_libs/adc_mcp3208.py
+++ b/rpi-scripts/interface_board_libs/adc_mcp3208.py
@ -0,0 +1,74 @@
+import spidev
+import time
+
+DEBUG = False
+
+
+class MCP3208:
+    def __init__(self, bus=0, device=0):
+        # Initialize SPI bus and device
+        self.spi = spidev.SpiDev()
+        self.spi.open(bus, device)  # Default SPI bus 0, device 0 (you can change as needed)
+        self.spi.max_speed_hz = 1000000  # Adjust based on your needs (e.g., 1MHz)
+        self.spi.mode = 0b00  # Set SPI mode (Mode 0 for MCP3208)
+    
+
+    def read(self, channel):
+        """
+        Read the ADC value from the specified channel (0-7).
+        """
+
+        # MCP3208 is a 12-bit SPI ADC. Communication requires sending a 3-byte command and receiving a 3-byte response.
+        # The bits in the command sequence are structured as follows:
+    
+        # Command Byte (8 bits):  
+        # | Start (1) | Mode (1) | Channel (3) | Padding (3) |
+    
+        # The MCP3208 responds with 3 bytes:
+        # - Byte 1: Contains the highest bit (bit 11) of the 12-bit ADC result.
+        # - Byte 2: Contains bits 10-3 of the ADC result.
+        # - Byte 3: Contains bits 2-0 of the ADC result.
+
+        # Ensure the channel is valid (0-7)
+        if channel < 0 or channel > 7:
+            raise ValueError(f"Channel must be between 0 and 7. (current channel={channel})")
+
+        # Construct the command byte sequence:
+        # - Start bit (1)  -> 1000 0000 (0x80)
+        # - Single-ended (1) -> 1100 0000 (0xC0)
+        # - Channel (3 bits) shifted into position
+        cmd = 0x80  # Start bit: 1000 0000
+        cmd |= 0x40  # Single-ended mode: 1100 0000
+        cmd |= (channel & 0x07) << 3  # Move channel number to bits 5-3
+
+        # Send the command and receive the 3-byte response
+        ret = self.spi.xfer2([cmd, 0x00, 0x00])  # Send 3 bytes, receive 3 bytes
+
+        if DEBUG:
+            print(f"result[0]: {bin(ret[0])}, result[1]: {bin(ret[1])}, result[2]: {bin(ret[2])}")
+
+        # Extract the 12-bit ADC result from the received bytes:
+        val = (ret[0] & 0x01) << 11  # Extract bit 11 (MSB)
+        val |= ret[1] << 3  # Extract bits 10-3
+        val |= ret[2] >> 5  # Extract bits 2-0 (shift down)
+
+        return val & 0x0FFF  # Mask to ensure only the lower 12 bits are used
+    
+
+    def close(self):
+        """Close SPI connection."""
+        self.spi.close()
+
+
+
+# Example usage:
+if __name__ == "__main__":
+    adc = MCP3208()
+    try:
+        while True:
+            for i in range(8):
+                adc_value = adc.read(i)
+                print(f'ADC[{i}]: {adc_value}')
+            time.sleep(0.5)
+    finally:
+        adc.close()
--- a/rpi-scripts/interface_board_libs/shift_register.py
+++ b/rpi-scripts/interface_board_libs/shift_register.py
@ -0,0 +1,51 @@
+import RPi.GPIO as GPIO
+from time import sleep
+
+
+class ShiftRegister:
+    def __init__(self, data_pin, latch_pin, clock_pin):
+        self.data_pin = data_pin
+        self.latch_pin = latch_pin
+        self.clock_pin = clock_pin
+        self.current_byte = 0  # Tracks the current state of the shift register
+
+        GPIO.setmode(GPIO.BCM)
+        GPIO.setup(self.data_pin, GPIO.OUT)
+        GPIO.setup(self.latch_pin, GPIO.OUT)
+        GPIO.setup(self.clock_pin, GPIO.OUT)
+
+    def write_byte(self, byte):
+        """Writes an 8-bit value to the shift register."""
+        GPIO.output(self.latch_pin, 0)
+        for i in range(8):
+            GPIO.output(self.clock_pin, 0)
+            GPIO.output(self.data_pin, (byte >> (7 - i)) & 1)  # MSB first
+            GPIO.output(self.clock_pin, 1)
+        GPIO.output(self.latch_pin, 1)
+        self.current_byte = byte  # Update the internal state
+
+    def clear(self):
+        """Clears the shift register (sets all outputs to 0)."""
+        self.write_byte(0)
+
+    def set_pin(self, pin, state):
+        """
+        Sets an individual pin to HIGH (1) or LOW (0).
+        Pins are numbered 0-7, with 0 being the LSB (Q0) and 7 being the MSB (Q7).
+        """
+        if not 0 <= pin <= 7:
+            raise ValueError("Pin must be in range 0-7.")
+        if state:
+            self.current_byte |= (1 << pin)  # Set the bit to 1
+        else:
+            self.current_byte &= ~(1 << pin)  # Set the bit to 0
+        self.write_byte(self.current_byte)
+
+
+    def toggle_pin(self, pin):
+        """Toggles the state of an individual pin."""
+        if not 0 <= pin <= 7:
+            raise ValueError("Pin must be in range 0-7.")
+        self.current_byte ^= (1 << pin)  # Flip the bit
+        self.write_byte(self.current_byte)
+
--- a/rpi-scripts/interface_board_pins.py
+++ b/rpi-scripts/interface_board_pins.py
@ -0,0 +1,113 @@
+# Pin mappings for GPIOs and other components specifically for the pi-interface-board_v1.0
+
+
+
+
+# ======================
+# === Digital Inputs ===
+# ======================
+# Pin mappings for digital inputs (labeled on housing as 1-8)
+GPIO_DIGITAL_INPUTS = {
+    0: 25,  # Dig-IN_1 is connected to GPIO_25
+    1: 16,  # Dig-IN_2 is connected to GPIO_16
+    2: 26,  # Dig-IN_3 is connected to GPIO_26
+    3: 13,  # Dig-IN_4 is connected to GPIO_13
+    4: 6,   # Dig-IN_5 is connected to GPIO_6
+    5: 5,   # Dig-IN_6 is connected to GPIO_5
+    6: 22,  # Dig-IN_7 is connected to GPIO_22
+    7: 24,  # Dig-IN_8 is connected to GPIO_24
+}
+
+
+
+
+# ======================
+# === Shift Register ===
+# ======================
+GPIO_SHIFT_REG_DATA = 27
+GPIO_SHIFT_REG_LATCH = 17
+GPIO_SHIFT_REG_CLOCK = 4
+
+# FIXME: numbering in schematic is wrong (inverse) layout / terminal order matches the shift register though (left to right -> 0-7)
+# Shift Register Channel Assignments
+SHIFT_REG_CHANNEL_BUZZER = 0  # Buzzer connected to shift register channel 0
+SHIFT_REG_CHANNEL_RELAY1 = 2  # Relay 1 connected to shift register channel 2
+SHIFT_REG_CHANNEL_RELAY2 = 1  # Relay 2 connected to shift register channel 1
+
+
+
+
+# ===============
+# ===== ADC =====
+# ===============
+# ADC IC is connected to RPI SPI interface 0 (pins below)
+ADC_SPI_BUS_NUM = 0  
+ADC_SPI_DEVICE_NUM = 0
+ADC_SPI_CS_PIN = 8  # SPI Chip Select for MCP3208
+# MISO_0: GPIO_9
+# MOSI_0: GPIO_10
+# SCLK_0: GPIO_11
+# CE_0:   GPIO# MCP3208 (ADC)
+
+# Pin mappings for Terminal number to actual ADC channels, including max voltage range
+ADC_TERMINALS = {
+    0: {"adc_channel": 1, "max_value": 3.3, "unit": "V"},  # Terminal 0 -> ADC channel 1, max 3.3V
+    1: {"adc_channel": 0, "max_value": 3.3, "unit": "V"},  # Terminal 1 -> ADC channel 0, max 3.3V
+    2: {"adc_channel": 3, "max_value": 5,   "unit": "V"},  # Terminal 2 -> ADC channel 3, max 5V
+    3: {"adc_channel": 2, "max_value": 5,   "unit": "V"},
+    4: {"adc_channel": 5, "max_value": 12,  "unit": "V"},
+    5: {"adc_channel": 4, "max_value": 24,  "unit": "V"},
+    6: {"adc_channel": 7, "max_value": 20,  "unit": "mA"}, # Terminal 6 -> ADC channel 7, max 20mA
+    7: {"adc_channel": 6, "max_value": 20,  "unit": "mA"},
+}
+
+
+# Alternative to ADC_CHANNELS list have separate constants for the channels (more intuitive)
+ADC_CHANNEL_T0__0_TO_3V3  = 1
+ADC_CHANNEL_T1__0_TO_3V3  = 0
+ADC_CHANNEL_T2__0_TO_5V   = 3
+ADC_CHANNEL_T3__0_TO_5V   = 2
+ADC_CHANNEL_T4__0_TO_12V  = 5
+ADC_CHANNEL_T5__0_TO_24V  = 4
+ADC_CHANNEL_T6__0_TO_20MA = 7
+ADC_CHANNEL_T7__0_TO_20MA = 6
+
+
+
+
+# ====================
+# === SPI Terminal ===
+# ====================
+SPI_BUS_NUM = 1
+# MISO_1: GPIO_19
+# MOSI_1: GPIO_20
+# SCLK_1: GPIO_21
+# CE_1:   GPIO_7
+
+
+
+
+# ====================
+# === I2C Terminal ===
+# ====================
+GPIO_I2C_SDA = 2
+GPIO_I2C_SCL = 3
+
+
+
+
+# ===================
+# === PWM outputs ===
+# ===================
+GPIO_PWM1 = 18  # RPI_PWM0
+GPIO_PWM2 = 12  # RPI_PWM0 too
+
+
+
+
+# ====================
+# === UART / RS485 ===
+# ====================
+GPIO_UART_TX = 14 # RPI TXD
+GPIO_UART_RX = 15 # RPI RXD
+GPIO_UART_DIR = 23
Author	SHA1	Message	Date
jonny	bce19a3093	Update pcbs + exports: Add final notes, minor optimizations during testing	2025-02-04 09:09:06 +01:00
jonny	084f17b63e	Merge branch 'dev/rpi-scripts' - python example scipts + GUI work on the RPI	2025-02-04 09:03:26 +01:00
jonny	98fb8846fd	Update Readme: Add photos of GUI, TOC	2025-02-04 08:57:15 +01:00
jonny	385ef87eb0	Fix systemd service waiting for network (gui autostart)	2025-02-03 16:27:32 +01:00
jonny	0e0f9e053c	Fix ADC scaling to voltages, GUI: chart autoscale, labels, units	2025-02-03 12:49:52 +01:00
jonny	ee55d4483f	Update Readme: Add RPI + Python usage instructions	2025-01-31 11:36:07 +01:00
jonny	a96344f6b9	Add systemd service file for auto starting GUI, Update Readme (WIP)	2025-01-30 17:16:34 +01:00
jonny	7d83e354fa	GUI: Optimize performance, Layout, Add "EXIT" tab	2025-01-30 17:15:36 +01:00
jonny	bb84205531	GUI: Outsource tabs, Add tab digital_plot	2025-01-30 13:59:56 +01:00
jonny	48bfbb98ef	Add gui for control and visualizing inputs (basic functionality works)	2025-01-30 11:57:05 +01:00
jonny	cd0ebd8891	Add PWM test, Minor optimizations, Swap Relay + PWM assignment	2025-01-30 11:08:18 +01:00
jonny	1be9545cd1	Fix ADC-lib to use 12Bit, Rework read_analog example + channel mapping	2025-01-29 11:09:21 +01:00
jonny	1fa1149170	Add custom ADC lib - ADC test success	2025-01-28 16:32:57 +01:00
jonny	6bd766ee41	Fix shift-register, pin assignment - Digital in/out tests work	2025-01-28 16:32:17 +01:00
jonny	4abdc2f565	Add examples: ADC, Digital-out, Fix Digital-in; Add shift_register class	2025-01-24 11:27:03 +01:00
jonny	335490b185	Add rpi-scripts folder, Add global pin assignment in "interface_board_pins.py"	2025-01-23 17:31:03 +01:00