rpi-interface-board/led-boards_v0.1/pcb2gcode/out/front.ngc

( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S20000 ( RPM spindle speed. )
G64 P0.05000 ( set maximum deviation from commanded toolpath )
G01 F400.00000 ( Feedrate. )


G00 Z30.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.98000mm)
M6      (Tool change.)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X1.23188 Y31.48819 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X1.23188 Y31.48819
G01 X1.21425 Y31.44561
G01 X1.21140 Y31.43624
G01 X1.19266 Y31.34201
G01 X1.19172 Y31.33225
G01 X1.18936 Y31.28422
G01 X1.18936 Y29.28423
G01 X1.19172 Y29.23622
G01 X1.19266 Y29.22647
G01 X1.21140 Y29.13223
G01 X1.21425 Y29.12286
G01 X1.25100 Y29.03411
G01 X1.25562 Y29.02548
G01 X1.30899 Y28.94562
G01 X1.31521 Y28.93803
G01 X1.38313 Y28.87011
G01 X1.39073 Y28.86388
G01 X1.47058 Y28.81052
G01 X1.47922 Y28.80589
G01 X1.56797 Y28.76914
G01 X1.57734 Y28.76630
G01 X1.67157 Y28.74755
G01 X1.68133 Y28.74661
G01 X1.72936 Y28.74425
G01 X2.20556 Y28.74425
G01 X2.24490 Y28.74582
G01 X2.25293 Y28.74646
G01 X2.33063 Y28.75908
G01 X2.33843 Y28.76099
G01 X2.37627 Y28.77193
G01 X2.66200 Y28.86716
G01 X2.71475 Y28.88822
G01 X2.72522 Y28.89312
G01 X2.82166 Y28.95271
G01 X2.83073 Y28.95989
G01 X2.87312 Y28.99766
G01 X3.00198 Y29.12652
G01 X3.06360 Y29.18816
G01 X3.09032 Y29.21712
G01 X3.09552 Y29.22324
G01 X3.14157 Y29.28712
G01 X3.14571 Y29.29398
G01 X3.16474 Y29.32850
G01 X3.25996 Y29.51897
G01 X3.26522 Y29.53109
G01 X3.26868 Y29.57282
G01 X3.26929 Y29.58423
G01 X3.27073 Y29.63698
G01 X3.27076 Y29.83939
G01 X3.27228 Y29.88979
G01 X3.27302 Y29.90218
G01 X3.27752 Y29.95093
G01 X3.28816 Y30.03739
G01 X3.29240 Y30.08331
G01 X3.29314 Y30.09550
G01 X3.29456 Y30.14138
G01 X3.29456 Y30.42707
G01 X3.29316 Y30.47287
G01 X3.29240 Y30.48511
G01 X3.28816 Y30.53111
G01 X3.27752 Y30.61755
G01 X3.27304 Y30.66619
G01 X3.27228 Y30.67859
G01 X3.27076 Y30.72911
G01 X3.27073 Y30.93152
G01 X3.26929 Y30.98427
G01 X3.26868 Y30.99568
G01 X3.26522 Y31.03731
G01 X3.25996 Y31.04950
G01 X3.16474 Y31.23998
G01 X3.14571 Y31.27450
G01 X3.14157 Y31.28135
G01 X3.09552 Y31.34523
G01 X3.09032 Y31.35136
G01 X3.06360 Y31.38031
G01 X2.99047 Y31.45346
G01 X2.82451 Y31.52222
G01 X2.77653 Y31.54048
G01 X2.76494 Y31.54452
G01 X2.67602 Y31.56987
G01 X2.66446 Y31.57244
G01 X2.62179 Y31.58067
G01 X2.32060 Y31.62951
G01 X2.29593 Y31.63302
G01 X2.28791 Y31.63401
G01 X2.23772 Y31.63807
G01 X2.22969 Y31.63838
G01 X2.20556 Y31.63886
G01 X1.72933 Y31.63886
G01 X1.69936 Y31.63812
G01 X1.68953 Y31.63764
G01 X1.62900 Y31.63164
G01 X1.61920 Y31.63020
G01 X1.55644 Y31.61767
G01 X1.54666 Y31.61521
G01 X1.48026 Y31.59499
G01 X1.47046 Y31.59149
G01 X1.40663 Y31.56535
G01 X1.39921 Y31.56195
G01 X1.38928 Y31.55743
G01 X1.30195 Y31.51854
G01 X1.29055 Y31.51353
G01 X1.23190 Y31.48821
G01 X1.23188 Y31.48819
G01 X1.23010 Y31.48742
G01 X1.21910 Y31.49078
G01 X1.18445 Y31.50513
G01 X1.09974 Y31.55039
G01 X1.05715 Y31.58537
G01 X1.02547 Y31.61132
G01 X0.96454 Y31.68559
G01 X0.91928 Y31.77030
G01 X0.90493 Y31.80495
G01 X0.87704 Y31.89687
G01 X0.86761 Y31.99245
G01 X0.86761 Y37.74916
G01 X0.84323 Y37.82952
G01 X0.82451 Y37.92373
G01 X0.78415 Y38.33346
G01 X0.78415 Y38.42950
G01 X0.82451 Y38.83917
G01 X0.84323 Y38.93338
G01 X0.86761 Y39.01377
G01 X0.86761 Y40.58542
G01 X0.87704 Y40.68103
G01 X0.90493 Y40.77295
G01 X0.91928 Y40.80760
G01 X0.96454 Y40.89231
G01 X1.02547 Y40.96658
G01 X1.09974 Y41.02751
G01 X1.18445 Y41.07277
G01 X1.21910 Y41.08712
G01 X1.31102 Y41.11501
G01 X1.40663 Y41.12444
G01 X46.42764 Y41.12444
G01 X46.52322 Y41.11501
G01 X46.61515 Y41.08712
G01 X46.64979 Y41.07277
G01 X46.73450 Y41.02751
G01 X46.80877 Y40.96658
G01 X46.86971 Y40.89231
G01 X46.91497 Y40.80760
G01 X46.92932 Y40.77295
G01 X46.95721 Y40.68103
G01 X46.96663 Y40.58542
G01 X46.96663 Y35.58894
G01 X46.95721 Y35.49336
G01 X46.92932 Y35.40144
G01 X46.91497 Y35.36679
G01 X46.86971 Y35.28208
G01 X46.80877 Y35.20781
G01 X46.77715 Y35.18188
G01 X46.73450 Y35.14688
G01 X46.64979 Y35.10161
G01 X46.61515 Y35.08726
G01 X46.52322 Y35.05937
G01 X46.42762 Y35.04995
G01 X46.33204 Y35.05937
G01 X46.32795 Y35.06062
G01 X46.29915 Y35.08721
G01 X46.25645 Y35.12668
G01 X46.23138 Y35.16417
G01 X46.12800 Y35.37693
G01 X46.12556 Y35.38490
G01 X46.12208 Y35.39600
G01 X46.10316 Y35.45457
G01 X46.07024 Y35.53570
G01 X46.02234 Y35.59813
G01 X45.97796 Y35.63349
G01 X45.95985 Y35.64609
G01 X45.88718 Y35.67619
G01 X45.82881 Y35.68485
G01 X45.80910 Y35.68515
G01 X44.20913 Y35.68515
G01 X44.18940 Y35.68485
G01 X44.13108 Y35.67619
G01 X44.05836 Y35.64606
G01 X43.99590 Y35.59813
G01 X43.94797 Y35.53568
G01 X43.91701 Y35.46041
G01 X43.89966 Y35.38490
G01 X43.89407 Y35.36252
G01 X43.88404 Y35.32501
G01 X43.72717 Y35.02193
G01 X43.71912 Y35.01144
G01 X43.69303 Y35.00446
G01 X43.68587 Y35.00324
G01 X43.64894 Y35.02473
G01 X43.55993 Y35.07906
G01 X43.42288 Y35.18363
G01 X43.41670 Y35.18957
G01 X43.39118 Y35.21292
G01 X43.37500 Y35.22696
G01 X43.31376 Y35.28808
G01 X43.26733 Y35.34147
G01 X43.22646 Y35.38409
G01 X43.21485 Y35.39504
G01 X43.10479 Y35.48302
G01 X43.07190 Y35.50753
G01 X43.05595 Y35.51642
G01 X42.91782 Y35.59072
G01 X42.91173 Y35.59394
G01 X42.87241 Y35.60893
G01 X42.86268 Y35.61218
G01 X42.73936 Y35.65203
G01 X42.71277 Y35.65826
G01 X42.65468 Y35.66887
G01 X42.55999 Y35.68142
G01 X42.49862 Y35.68444
G01 X42.43962 Y35.68444
G01 X42.41813 Y35.68338
G01 X42.29702 Y35.68937
G01 X42.29583 Y35.69016
G01 X42.26405 Y35.71142
G01 X42.17119 Y35.78747
G01 X41.22166 Y36.73697
G01 X41.14561 Y36.82983
G01 X41.13497 Y36.84573
G01 X41.13126 Y36.86448
G01 X41.11937 Y36.98391
G01 X41.11937 Y38.01995
G01 X41.11904 Y38.03963
G01 X41.11038 Y38.09798
G01 X41.08028 Y38.17070
G01 X41.06040 Y38.19869
G01 X41.03233 Y38.23316
G01 X40.96987 Y38.28108
G01 X40.89720 Y38.31118
G01 X40.83881 Y38.31985
G01 X40.81915 Y38.32018
G01 X39.01910 Y38.32018
G01 X38.99931 Y38.31985
G01 X38.94107 Y38.31121
G01 X38.86838 Y38.28108
G01 X38.80592 Y38.23316
G01 X38.75796 Y38.17070
G01 X38.72786 Y38.09798
G01 X38.71920 Y38.03963
G01 X38.71887 Y38.01995
G01 X38.71887 Y36.21990
G01 X38.71920 Y36.20024
G01 X38.72786 Y36.14187
G01 X38.75796 Y36.06915
G01 X38.80589 Y36.00669
G01 X38.86835 Y35.95876
G01 X38.93381 Y35.93118
G01 X38.94341 Y35.92788
G01 X39.01910 Y35.91053
G01 X39.04214 Y35.90481
G01 X39.07965 Y35.89475
G01 X39.38064 Y35.73938
G01 X39.39852 Y35.74385
G01 X39.49012 Y35.76212
G01 X39.64696 Y35.78538
G01 X39.73129 Y35.79371
G01 X39.88811 Y35.80141
G01 X39.97013 Y35.80141
G01 X40.12697 Y35.79371
G01 X40.14711 Y35.79247
G01 X40.20401 Y35.76123
G01 X40.34267 Y35.67812
G01 X40.40299 Y35.63783
G01 X40.53037 Y35.54340
G01 X40.58054 Y35.50222
G01 X40.69687 Y35.39679
G01 X40.74099 Y35.35267
G01 X40.84643 Y35.23634
G01 X40.88760 Y35.18617
G01 X40.98204 Y35.05879
G01 X41.02232 Y34.99847
G01 X41.10543 Y34.85981
G01 X41.14610 Y34.78356
G01 X41.19911 Y34.67149
G01 X41.19913 Y34.63118
G01 X41.19911 Y34.53862
G01 X41.19911 Y34.36931
G01 X41.18267 Y34.28660
G01 X41.13713 Y34.13652
G01 X41.10038 Y34.04779
G01 X41.02646 Y33.90947
G01 X40.97310 Y33.82961
G01 X40.95412 Y33.80649
G01 X40.87360 Y33.70837
G01 X40.80568 Y33.64045
G01 X40.76911 Y33.61046
G01 X40.76911 Y33.30822
G01 X40.76675 Y33.26022
G01 X40.76004 Y33.19192
G01 X40.74130 Y33.09771
G01 X40.72138 Y33.03205
G01 X40.68463 Y32.94333
G01 X40.65227 Y32.88280
G01 X40.59890 Y32.80294
G01 X40.55539 Y32.74990
G01 X40.52308 Y32.71427
G01 X39.37010 Y31.56126
G01 X39.33449 Y31.52898
G01 X39.28146 Y31.48544
G01 X39.20157 Y31.43208
G01 X39.14107 Y31.39974
G01 X39.05232 Y31.36296
G01 X38.99042 Y31.34422
G01 X38.98646 Y31.34363
G01 X38.89152 Y31.33426
G01 X38.82291 Y31.33088
G01 X38.77615 Y31.32974
G01 X35.40262 Y31.32974
G01 X35.37814 Y31.35423
G01 X35.15264 Y31.52334
G01 X34.92713 Y31.57973
G01 X33.22714 Y31.57973
G01 X33.00161 Y31.52334
G01 X32.77608 Y31.35420
G01 X32.73712 Y31.31524
G01 X32.73712 Y31.09314
G01 X32.74639 Y31.05613
G01 X32.76483 Y30.96370
G01 X32.78955 Y30.79708
G01 X32.79793 Y30.71214
G01 X32.80611 Y30.54549
G01 X32.80611 Y30.46296
G01 X32.79793 Y30.29632
G01 X32.78955 Y30.21138
G01 X32.76483 Y30.04475
G01 X32.74809 Y29.95923
G01 X32.76483 Y29.93586
G01 X32.79102 Y29.89837
G01 X32.90484 Y29.67363
G01 X32.91093 Y29.65420
G01 X32.93217 Y29.58745
G01 X32.96597 Y29.50345
G01 X33.01390 Y29.44100
G01 X33.07636 Y29.39307
G01 X33.14906 Y29.36297
G01 X33.20743 Y29.35431
G01 X33.22714 Y29.35398
G01 X34.92713 Y29.35398
G01 X34.94682 Y29.35431
G01 X35.00519 Y29.36297
G01 X35.07788 Y29.39307
G01 X35.14034 Y29.44100
G01 X35.18825 Y29.50343
G01 X35.22053 Y29.58263
G01 X35.23798 Y29.65420
G01 X35.24159 Y29.66828
G01 X35.25164 Y29.70579
G01 X35.28334 Y29.79802
G01 X35.43186 Y29.84059
G01 X35.46338 Y29.84580
G01 X35.56257 Y29.85400
G01 X43.09415 Y29.85400
G01 X43.12366 Y29.85471
G01 X43.15793 Y29.85639
G01 X43.19194 Y29.86144
G01 X43.24977 Y29.87295
G01 X43.28312 Y29.88131
G01 X43.31543 Y29.89286
G01 X43.32803 Y29.89754
G01 X43.36994 Y29.91544
G01 X43.40098 Y29.93012
G01 X43.43044 Y29.94778
G01 X43.47954 Y29.98059
G01 X43.50710 Y30.00102
G01 X43.53258 Y30.02413
G01 X43.55391 Y30.04445
G01 X45.46892 Y31.95946
G01 X45.48924 Y31.98079
G01 X45.51233 Y32.00627
G01 X45.53278 Y32.03383
G01 X45.56559 Y32.08293
G01 X45.58322 Y32.11234
G01 X45.59922 Y32.14622
G01 X45.61581 Y32.18531
G01 X45.62048 Y32.19794
G01 X45.63207 Y32.23027
G01 X45.64040 Y32.26360
G01 X45.64845 Y32.30058
G01 X45.65190 Y32.32143
G01 X45.65696 Y32.35542
G01 X45.65863 Y32.38971
G01 X45.65937 Y32.41925
G01 X45.65937 Y33.16453
G01 X45.67126 Y33.28399
G01 X45.67870 Y33.32151
G01 X45.71101 Y33.43301
G01 X45.79618 Y33.46507
G01 X45.80913 Y33.46900
G01 X45.81525 Y33.47088
G01 X45.87408 Y33.48937
G01 X45.95988 Y33.52377
G01 X46.02234 Y33.57170
G01 X46.07024 Y33.63413
G01 X46.10316 Y33.71526
G01 X46.12566 Y33.78490
G01 X46.14492 Y33.83708
G01 X46.16044 Y33.87459
G01 X46.29915 Y34.07073
G01 X46.29915 Y35.08724
G01 X46.25645 Y35.12668
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.72092 Y34.28719 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.72092 Y34.28719
G01 X43.71909 Y34.27484
G01 X43.67713 Y34.13652
G01 X43.64038 Y34.04779
G01 X43.56646 Y33.90947
G01 X43.51310 Y33.82961
G01 X43.41360 Y33.70837
G01 X43.34568 Y33.64045
G01 X43.31487 Y33.61518
G01 X43.22445 Y33.54096
G01 X43.14457 Y33.48760
G01 X43.00626 Y33.41366
G01 X42.91752 Y33.37690
G01 X42.76745 Y33.33139
G01 X42.67325 Y33.31264
G01 X42.51716 Y33.29727
G01 X42.42110 Y33.29727
G01 X42.26504 Y33.31264
G01 X42.17083 Y33.33139
G01 X42.02074 Y33.37690
G01 X41.93200 Y33.41366
G01 X41.79369 Y33.48760
G01 X41.71384 Y33.54096
G01 X41.59260 Y33.64045
G01 X41.52468 Y33.70837
G01 X41.42519 Y33.82961
G01 X41.37183 Y33.90947
G01 X41.29789 Y34.04779
G01 X41.26113 Y34.13652
G01 X41.21562 Y34.28660
G01 X41.19911 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.19911 Y34.53862 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.19911 Y34.53862
G01 X41.19911 Y34.67149
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.38064 Y35.73938 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.38064 Y35.73938
G01 X39.37970 Y35.73717
G01 X39.36065 Y35.69323
G01 X39.30587 Y35.58454
G01 X39.26601 Y35.51652
G01 X39.21564 Y35.44195
G01 X39.19705 Y35.41800
G01 X39.17036 Y35.38587
G01 X39.13536 Y35.34655
G01 X39.13091 Y35.34147
G01 X39.06076 Y35.26080
G01 X39.03116 Y35.22046
G01 X38.99860 Y35.17119
G01 X38.95514 Y35.09780
G01 X38.91486 Y35.03809
G01 X38.88318 Y34.99653
G01 X38.87567 Y34.98648
G01 X38.85961 Y34.96458
G01 X38.76360 Y34.85658
G01 X38.68887 Y34.78587
G01 X38.65913 Y34.75861
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.65913 Y34.36931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.65913 Y34.36931
G01 X38.64267 Y34.28660
G01 X38.59713 Y34.13652
G01 X38.56038 Y34.04779
G01 X38.48646 Y33.90947
G01 X38.43310 Y33.82961
G01 X38.41412 Y33.80649
G01 X38.33360 Y33.70837
G01 X38.26568 Y33.64045
G01 X38.14445 Y33.54096
G01 X38.06457 Y33.48760
G01 X37.92626 Y33.41366
G01 X37.83752 Y33.37690
G01 X37.68745 Y33.33139
G01 X37.59325 Y33.31264
G01 X37.43716 Y33.29727
G01 X37.34110 Y33.29727
G01 X37.18504 Y33.31264
G01 X37.09083 Y33.33139
G01 X36.94074 Y33.37690
G01 X36.85200 Y33.41366
G01 X36.71369 Y33.48760
G01 X36.63384 Y33.54096
G01 X36.51260 Y33.64045
G01 X36.44468 Y33.70837
G01 X36.34519 Y33.82961
G01 X36.29183 Y33.90947
G01 X36.21789 Y34.04779
G01 X36.18113 Y34.13652
G01 X36.13562 Y34.28660
G01 X36.11913 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.99042 Y31.34422 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.99042 Y31.34422
G01 X42.74619 Y31.34422
G01 X44.16913 Y32.76718
G01 X44.16913 Y33.29885
G01 X44.11355 Y33.30434
G01 X44.02163 Y33.33220
G01 X43.93690 Y33.37749
G01 X43.86265 Y33.43842
G01 X43.80172 Y33.51269
G01 X43.75643 Y33.59740
G01 X43.72856 Y33.68932
G01 X43.71914 Y33.78490
G01 X43.71914 Y34.27510
G01 X43.72092 Y34.28719
G01 X43.73029 Y34.38193
G01 X43.73799 Y34.53875
G01 X43.73799 Y34.63108
G01 X43.73029 Y34.78792
G01 X43.72092 Y34.88269
G01 X43.71912 Y34.89496
G01 X43.71912 Y35.01144
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.68587 Y35.00324 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.68587 Y35.00324
G01 X43.68635 Y35.00296
G01 X43.71912 Y34.89496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.29915 Y34.07076 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.29915 Y34.07076
G01 X46.32546 Y34.10794
G01 X46.40887 Y34.11617
G01 X46.44639 Y34.11617
G01 X46.54197 Y34.10675
G01 X46.63389 Y34.07886
G01 X46.71860 Y34.03360
G01 X46.77715 Y33.98556
G01 X46.79287 Y33.97266
G01 X46.81939 Y33.94614
G01 X46.88030 Y33.87192
G01 X46.92556 Y33.78724
G01 X46.95345 Y33.69537
G01 X46.95718 Y33.67662
G01 X46.96663 Y33.58089
G01 X46.96663 Y28.83841
G01 X46.95721 Y28.74283
G01 X46.92932 Y28.65090
G01 X46.91497 Y28.61626
G01 X46.86971 Y28.53155
G01 X46.80877 Y28.45728
G01 X46.73450 Y28.39634
G01 X46.64979 Y28.35108
G01 X46.61515 Y28.33673
G01 X46.52322 Y28.30884
G01 X46.42764 Y28.29942
G01 X5.75813 Y28.29942
G01 X5.66252 Y28.30884
G01 X5.57060 Y28.33673
G01 X5.53596 Y28.35108
G01 X5.45125 Y28.39634
G01 X5.37698 Y28.45728
G01 X5.31604 Y28.53155
G01 X5.27078 Y28.61626
G01 X5.25643 Y28.65090
G01 X5.22854 Y28.74283
G01 X5.21912 Y28.83841
G01 X5.21912 Y29.07036
G01 X5.28810 Y29.23696
G01 X5.30286 Y29.27501
G01 X5.30611 Y29.28397
G01 X5.32773 Y29.35314
G01 X5.33011 Y29.36213
G01 X5.34474 Y29.42982
G01 X5.34627 Y29.43881
G01 X5.35097 Y29.47099
G01 X5.39930 Y29.86368
G01 X5.40276 Y29.90119
G01 X5.40352 Y29.91341
G01 X5.40466 Y29.95093
G01 X5.40466 Y30.61757
G01 X5.40352 Y30.65499
G01 X5.40278 Y30.66723
G01 X5.39930 Y30.70482
G01 X5.35097 Y31.09751
G01 X5.34627 Y31.12969
G01 X5.34474 Y31.13868
G01 X5.33011 Y31.20637
G01 X5.32773 Y31.21536
G01 X5.30611 Y31.28453
G01 X5.30286 Y31.29349
G01 X5.28810 Y31.33154
G01 X5.23220 Y31.46654
G01 X5.09778 Y31.52222
G01 X5.06438 Y31.53528
G01 X5.05633 Y31.53825
G01 X4.99298 Y31.55872
G01 X4.98493 Y31.56098
G01 X4.95442 Y31.56883
G01 X4.74147 Y31.61910
G01 X4.70426 Y31.62674
G01 X4.69270 Y31.62877
G01 X4.62123 Y31.63713
G01 X4.60967 Y31.63782
G01 X4.57408 Y31.63886
G01 X4.19308 Y31.63886
G01 X4.15757 Y31.63782
G01 X4.14599 Y31.63716
G01 X4.07444 Y31.62877
G01 X4.06288 Y31.62674
G01 X4.02567 Y31.61910
G01 X3.81272 Y31.56883
G01 X3.78221 Y31.56098
G01 X3.77416 Y31.55872
G01 X3.71081 Y31.53825
G01 X3.70276 Y31.53528
G01 X3.66936 Y31.52222
G01 X3.50340 Y31.45346
G01 X2.99047 Y31.45346
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X4.25691 Y30.01737 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X4.25691 Y30.01737
G01 X4.25691 Y30.55110
G01 X4.29976 Y30.72245
G01 X4.32153 Y30.74424
G01 X4.44564 Y30.74424
G01 X4.46740 Y30.72245
G01 X4.51025 Y30.55110
G01 X4.51025 Y30.01737
G01 X4.46740 Y29.84602
G01 X4.44564 Y29.82423
G01 X4.32153 Y29.82423
G01 X4.29976 Y29.84602
G01 X4.25691 Y30.01737
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X5.21912 Y29.07036 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X5.21912 Y29.07036
G01 X5.14640 Y28.99766
G01 X5.11744 Y28.97092
G01 X5.11132 Y28.96571
G01 X5.04741 Y28.91966
G01 X5.04053 Y28.91550
G01 X5.00601 Y28.89647
G01 X4.82438 Y28.80564
G01 X4.81554 Y28.80125
G01 X4.76339 Y28.77884
G01 X4.75252 Y28.77491
G01 X4.64223 Y28.74887
G01 X4.63073 Y28.74753
G01 X4.57408 Y28.74425
G01 X4.19311 Y28.74425
G01 X4.13644 Y28.74753
G01 X4.12494 Y28.74887
G01 X4.01465 Y28.77491
G01 X4.00378 Y28.77884
G01 X3.95163 Y28.80125
G01 X3.76116 Y28.89647
G01 X3.72664 Y28.91550
G01 X3.71975 Y28.91966
G01 X3.65585 Y28.96571
G01 X3.64973 Y28.97092
G01 X3.62077 Y28.99766
G01 X3.43030 Y29.18816
G01 X3.40053 Y29.22073
G01 X3.39476 Y29.22764
G01 X3.34462 Y29.30013
G01 X3.34018 Y29.30795
G01 X3.30383 Y29.38824
G01 X3.30088 Y29.39675
G01 X3.28826 Y29.43901
G01 X3.26522 Y29.53109
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X2.26934 Y29.95641 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X2.26934 Y29.95641
G01 X2.26934 Y30.61206
G01 X2.33223 Y30.36060
G01 X2.33223 Y30.20787
G01 X2.26934 Y29.95641
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.26522 Y31.03731 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.26522 Y31.03731
G01 X3.28826 Y31.12946
G01 X3.30088 Y31.17173
G01 X3.30383 Y31.18024
G01 X3.34018 Y31.26053
G01 X3.34462 Y31.26835
G01 X3.39476 Y31.34084
G01 X3.40053 Y31.34775
G01 X3.43030 Y31.38031
G01 X3.50340 Y31.45346
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.84687 Y35.72991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.84687 Y35.72991
G01 X7.75769 Y35.68223
G01 X7.67784 Y35.62887
G01 X7.55660 Y35.52938
G01 X7.48868 Y35.46146
G01 X7.38919 Y35.34022
G01 X7.33583 Y35.26036
G01 X7.26189 Y35.12204
G01 X7.22513 Y35.03329
G01 X7.17962 Y34.88323
G01 X7.16311 Y34.80032
G01 X7.16311 Y34.78091
G01 X7.16313 Y34.63118
G01 X7.16313 Y34.41124
G01 X7.13336 Y34.38399
G01 X7.05869 Y34.31333
G01 X6.96262 Y34.20527
G01 X6.94662 Y34.18343
G01 X6.93905 Y34.17330
G01 X6.90733 Y34.13169
G01 X6.86709 Y34.07205
G01 X6.82361 Y33.99862
G01 X6.79110 Y33.94942
G01 X6.78790 Y33.94508
G01 X6.76148 Y33.90903
G01 X6.69135 Y33.82839
G01 X6.65046 Y33.78574
G01 X6.63887 Y33.77482
G01 X6.52879 Y33.68681
G01 X6.49590 Y33.66232
G01 X6.47990 Y33.65341
G01 X6.34177 Y33.57911
G01 X6.33573 Y33.57591
G01 X6.28668 Y33.55768
G01 X6.16336 Y33.51782
G01 X6.13677 Y33.51160
G01 X6.07873 Y33.50098
G01 X5.98399 Y33.48841
G01 X5.92265 Y33.48541
G01 X5.86357 Y33.48541
G01 X5.80225 Y33.48841
G01 X5.70753 Y33.50098
G01 X5.64949 Y33.51160
G01 X5.62287 Y33.51782
G01 X5.49958 Y33.55768
G01 X5.45051 Y33.57591
G01 X5.44444 Y33.57914
G01 X5.30634 Y33.65341
G01 X5.29034 Y33.66232
G01 X5.25750 Y33.68678
G01 X5.14744 Y33.77477
G01 X5.13608 Y33.78551
G01 X5.13583 Y33.78574
G01 X5.09489 Y33.82839
G01 X5.02476 Y33.90906
G01 X4.99514 Y33.94942
G01 X4.96260 Y33.99867
G01 X4.92552 Y34.06128
G01 X4.88874 Y34.13700
G01 X4.86562 Y34.19125
G01 X4.85219 Y34.22758
G01 X4.82051 Y34.34147
G01 X4.80746 Y34.39923
G01 X4.80670 Y34.40365
G01 X4.79293 Y34.55536
G01 X4.79097 Y34.58493
G01 X4.79293 Y34.61447
G01 X4.80670 Y34.76621
G01 X4.80746 Y34.77063
G01 X4.82051 Y34.82839
G01 X4.85219 Y34.94228
G01 X4.86562 Y34.97860
G01 X4.88874 Y35.03281
G01 X4.92552 Y35.10855
G01 X4.96260 Y35.17116
G01 X4.99516 Y35.22046
G01 X5.02478 Y35.26080
G01 X5.09491 Y35.34147
G01 X5.13580 Y35.38409
G01 X5.14739 Y35.39504
G01 X5.25750 Y35.48305
G01 X5.29036 Y35.50753
G01 X5.30629 Y35.51640
G01 X5.44441 Y35.59069
G01 X5.45376 Y35.59562
G01 X5.47802 Y35.60814
G01 X5.49062 Y35.61873
G01 X5.50131 Y35.62798
G01 X5.53339 Y35.65780
G01 X6.61256 Y36.73697
G01 X6.68863 Y36.82983
G01 X6.69928 Y36.84576
G01 X6.70298 Y36.86448
G01 X6.71487 Y36.98391
G01 X6.71487 Y37.33831
G01 X6.72038 Y37.36968
G01 X6.73054 Y37.43829
G01 X6.73600 Y37.49348
G01 X6.73938 Y37.56209
G01 X6.74004 Y37.58914
G01 X6.74004 Y38.01995
G01 X6.76552 Y38.18738
G01 X6.80192 Y38.23316
G01 X6.86438 Y38.28108
G01 X6.93707 Y38.31121
G01 X6.99531 Y38.31985
G01 X7.01510 Y38.32018
G01 X8.81515 Y38.32018
G01 X8.83481 Y38.31985
G01 X8.89320 Y38.31118
G01 X8.96587 Y38.28108
G01 X9.02833 Y38.23316
G01 X9.07628 Y38.17070
G01 X9.10638 Y38.09798
G01 X9.11504 Y38.03963
G01 X9.11537 Y38.01995
G01 X9.11537 Y36.21990
G01 X9.11504 Y36.20024
G01 X9.10638 Y36.14187
G01 X9.07628 Y36.06915
G01 X9.00107 Y35.97758
G01 X8.99950 Y35.97601
G01 X8.90585 Y35.88261
G01 X8.87423 Y35.85267
G01 X8.81515 Y35.79953
G01 X8.78825 Y35.77456
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.70313 Y34.75861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.70313 Y34.75861
G01 X9.73287 Y34.78587
G01 X9.80760 Y34.85658
G01 X9.90361 Y34.96458
G01 X9.91967 Y34.98648
G01 X9.92718 Y34.99653
G01 X9.95886 Y35.03809
G01 X9.99914 Y35.09780
G01 X10.04260 Y35.17119
G01 X10.07516 Y35.22046
G01 X10.10476 Y35.26080
G01 X10.17491 Y35.34147
G01 X10.20003 Y35.36864
G01 X10.21580 Y35.38409
G01 X10.23318 Y35.40050
G01 X10.30318 Y35.47891
G01 X10.30552 Y35.49064
G01 X10.31222 Y35.52625
G01 X10.32193 Y35.60591
G01 X10.32358 Y35.63545
G01 X10.32378 Y35.63933
G01 X10.32528 Y35.66974
G01 X10.33033 Y35.70375
G01 X10.34181 Y35.76158
G01 X10.35017 Y35.79491
G01 X10.36173 Y35.82724
G01 X10.38431 Y35.88172
G01 X10.39901 Y35.91281
G01 X10.41664 Y35.94223
G01 X10.44946 Y35.99135
G01 X10.46991 Y36.01891
G01 X10.49299 Y36.04439
G01 X10.51331 Y36.06572
G01 X11.18456 Y36.73697
G01 X11.26063 Y36.82983
G01 X11.27128 Y36.84576
G01 X11.27498 Y36.86448
G01 X11.28687 Y36.98391
G01 X11.28687 Y38.01995
G01 X11.28720 Y38.03963
G01 X11.29586 Y38.09798
G01 X11.32596 Y38.17070
G01 X11.37392 Y38.23316
G01 X11.43638 Y38.28108
G01 X11.50907 Y38.31121
G01 X11.56731 Y38.31985
G01 X11.58713 Y38.32018
G01 X13.38715 Y38.32018
G01 X13.40681 Y38.31985
G01 X13.46520 Y38.31118
G01 X13.53787 Y38.28108
G01 X13.60033 Y38.23316
G01 X13.64828 Y38.17070
G01 X13.67838 Y38.09798
G01 X13.68704 Y38.03963
G01 X13.68737 Y38.01995
G01 X13.68737 Y36.21990
G01 X13.68704 Y36.20024
G01 X13.67841 Y36.14190
G01 X13.65829 Y36.09054
G01 X13.65352 Y36.07979
G01 X13.65227 Y36.07705
G01 X13.59571 Y35.95175
G01 X13.57696 Y35.91304
G01 X13.52560 Y35.81381
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.92687 Y35.72991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.92687 Y35.72991
G01 X12.83769 Y35.68223
G01 X12.75784 Y35.62887
G01 X12.63660 Y35.52938
G01 X12.56868 Y35.46146
G01 X12.46919 Y35.34022
G01 X12.41583 Y35.26036
G01 X12.34189 Y35.12204
G01 X12.30513 Y35.03329
G01 X12.25962 Y34.88323
G01 X12.24313 Y34.80032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.70313 Y34.36931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.70313 Y34.36931
G01 X9.71962 Y34.28660
G01 X9.76513 Y34.13652
G01 X9.80189 Y34.04779
G01 X9.87583 Y33.90947
G01 X9.92919 Y33.82961
G01 X10.02868 Y33.70837
G01 X10.09660 Y33.64045
G01 X10.21784 Y33.54096
G01 X10.29769 Y33.48760
G01 X10.43600 Y33.41366
G01 X10.52474 Y33.37690
G01 X10.67483 Y33.33139
G01 X10.76904 Y33.31264
G01 X10.92510 Y33.29727
G01 X11.02116 Y33.29727
G01 X11.17725 Y33.31264
G01 X11.27145 Y33.33139
G01 X11.42152 Y33.37690
G01 X11.51026 Y33.41366
G01 X11.64857 Y33.48760
G01 X11.72845 Y33.54096
G01 X11.84968 Y33.64045
G01 X11.91760 Y33.70837
G01 X11.99812 Y33.80649
G01 X12.01710 Y33.82961
G01 X12.07046 Y33.90947
G01 X12.14438 Y34.04779
G01 X12.18113 Y34.13652
G01 X12.22667 Y34.28660
G01 X12.24313 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.91488 Y32.99524 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.91488 Y32.99524
G01 X9.91408 Y32.99522
G01 X9.28723 Y33.62204
G01 X9.30968 Y33.64045
G01 X9.37760 Y33.70837
G01 X9.45812 Y33.80649
G01 X9.47710 Y33.82961
G01 X9.53046 Y33.90947
G01 X9.60438 Y34.04779
G01 X9.64113 Y34.13652
G01 X9.68667 Y34.28660
G01 X9.70313 Y34.36931
G01 X9.70313 Y34.75861
G01 X9.67448 Y34.78597
G01 X9.63455 Y34.82534
G01 X9.60214 Y34.85592
G01 X9.60074 Y34.85717
G01 X9.48469 Y34.98584
G01 X9.45444 Y35.02831
G01 X9.44730 Y35.03809
G01 X9.44240 Y35.04472
G01 X9.40709 Y35.09783
G01 X9.36361 Y35.17121
G01 X9.33107 Y35.22046
G01 X9.30148 Y35.26080
G01 X9.23135 Y35.34147
G01 X9.19046 Y35.38409
G01 X9.17885 Y35.39504
G01 X9.06879 Y35.48302
G01 X9.02193 Y35.52013
G01 X8.97247 Y35.56367
G01 X8.94451 Y35.59089
G01 X8.90450 Y35.63319
G01 X8.85147 Y35.69394
G01 X8.78825 Y35.77456
G01 X8.71532 Y35.78538
G01 X8.63097 Y35.79371
G01 X8.47413 Y35.80141
G01 X8.39211 Y35.80141
G01 X8.23529 Y35.79371
G01 X8.15096 Y35.78538
G01 X7.99412 Y35.76212
G01 X7.90252 Y35.74385
G01 X7.84687 Y35.72991
G01 X7.71304 Y35.72991
G01 X7.07634 Y35.09318
G01 X7.10113 Y35.03329
G01 X7.14667 Y34.88323
G01 X7.16311 Y34.80032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.16311 Y34.78091 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.16311 Y34.78091
G01 X7.16313 Y34.41124
G01 X7.19178 Y34.38389
G01 X7.23169 Y34.34452
G01 X7.26410 Y34.31394
G01 X7.26552 Y34.31267
G01 X7.38160 Y34.18396
G01 X7.41182 Y34.14157
G01 X7.41893 Y34.13174
G01 X7.42384 Y34.12514
G01 X7.45912 Y34.07205
G01 X7.50260 Y33.99867
G01 X7.53514 Y33.94942
G01 X7.56481 Y33.90898
G01 X7.63489 Y33.82839
G01 X7.67580 Y33.78574
G01 X7.69313 Y33.76938
G01 X7.76318 Y33.69092
G01 X7.76552 Y33.67921
G01 X7.77222 Y33.64360
G01 X7.78287 Y33.53050
G01 X7.78287 Y33.28821
G01 X7.78360 Y33.25869
G01 X7.78528 Y33.22445
G01 X7.79033 Y33.19042
G01 X7.80181 Y33.13261
G01 X7.81017 Y33.09923
G01 X7.82173 Y33.06692
G01 X7.84431 Y33.01244
G01 X7.85901 Y32.98135
G01 X7.87664 Y32.95194
G01 X7.88261 Y32.94216
G01 X7.90946 Y32.90281
G01 X7.92991 Y32.87528
G01 X7.95299 Y32.84978
G01 X7.97331 Y32.82844
G01 X9.10633 Y31.69545
G01 X9.12767 Y31.67513
G01 X9.15314 Y31.65202
G01 X9.18070 Y31.63159
G01 X9.22980 Y31.59878
G01 X9.25927 Y31.58112
G01 X9.29030 Y31.56644
G01 X9.33221 Y31.54854
G01 X9.34481 Y31.54386
G01 X9.37715 Y31.53231
G01 X9.41047 Y31.52395
G01 X9.42205 Y31.52118
G01 X9.46831 Y31.51244
G01 X9.50232 Y31.50739
G01 X9.53661 Y31.50571
G01 X9.56612 Y31.50497
G01 X13.19799 Y31.50497
G01 X13.30267 Y31.53121
G01 X13.35535 Y31.54170
G01 X13.52200 Y31.56642
G01 X13.56835 Y31.57099
G01 X13.73497 Y31.57919
G01 X13.77930 Y31.57919
G01 X13.94592 Y31.57099
G01 X13.99225 Y31.56642
G01 X14.15890 Y31.54170
G01 X14.21158 Y31.53121
G01 X14.31625 Y31.50497
G01 X14.94549 Y31.50497
G01 X15.06492 Y31.49311
G01 X15.10243 Y31.48565
G01 X15.29329 Y31.41806
G01 X15.34955 Y31.34368
G01 X15.35880 Y31.32987
G01 X15.35516 Y31.30541
G01 X15.32982 Y31.19032
G01 X15.31049 Y31.12608
G01 X15.29906 Y31.09169
G01 X15.29212 Y31.07259
G01 X15.26751 Y31.01448
G01 X15.24655 Y30.97130
G01 X15.22339 Y30.91699
G01 X15.20891 Y30.87780
G01 X15.17543 Y30.75743
G01 X15.16240 Y30.69972
G01 X15.16136 Y30.69377
G01 X15.14686 Y30.53381
G01 X15.14490 Y30.50421
G01 X15.14686 Y30.47465
G01 X15.16136 Y30.31468
G01 X15.16240 Y30.30874
G01 X15.17543 Y30.25103
G01 X15.20891 Y30.13066
G01 X15.22339 Y30.09146
G01 X15.24655 Y30.03716
G01 X15.28557 Y29.95679
G01 X15.32507 Y29.89014
G01 X15.35758 Y29.84092
G01 X15.38933 Y29.79766
G01 X15.46352 Y29.71232
G01 X15.50444 Y29.66967
G01 X15.51750 Y29.65733
G01 X15.60215 Y29.58969
G01 X15.63368 Y29.56449
G01 X15.66697 Y29.53970
G01 X15.68249 Y29.53104
G01 X15.82923 Y29.45212
G01 X15.83441 Y29.44938
G01 X15.88440 Y29.43073
G01 X16.01462 Y29.38865
G01 X16.04368 Y29.38184
G01 X16.10182 Y29.37120
G01 X16.20213 Y29.35791
G01 X16.26763 Y29.35471
G01 X16.32664 Y29.35471
G01 X16.39212 Y29.35791
G01 X16.49242 Y29.37120
G01 X16.55056 Y29.38184
G01 X16.57962 Y29.38865
G01 X16.70985 Y29.43073
G01 X16.75984 Y29.44938
G01 X16.76502 Y29.45212
G01 X16.91175 Y29.53104
G01 X16.92727 Y29.53970
G01 X16.96055 Y29.56447
G01 X17.07675 Y29.65733
G01 X17.08981 Y29.66967
G01 X17.13075 Y29.71234
G01 X17.20492 Y29.79766
G01 X17.23669 Y29.84094
G01 X17.26918 Y29.89014
G01 X17.27391 Y29.89812
G01 X17.34630 Y29.99649
G01 X17.37139 Y30.02448
G01 X17.37208 Y30.02522
G01 X17.41841 Y30.07704
G01 X17.56387 Y30.20701
G01 X17.56712 Y30.20940
G01 X17.56712 Y30.91961
G01 X17.55132 Y30.97173
G01 X17.51457 Y31.06047
G01 X17.43603 Y31.20744
G01 X17.38267 Y31.28730
G01 X17.27695 Y31.41610
G01 X17.20903 Y31.48402
G01 X17.13047 Y31.54851
G01 X17.12806 Y31.57305
G01 X17.10931 Y31.66726
G01 X17.08940 Y31.73291
G01 X17.05265 Y31.82166
G01 X17.02029 Y31.88216
G01 X17.01102 Y31.89606
G01 X16.96692 Y31.96202
G01 X16.92341 Y32.01506
G01 X16.89110 Y32.05069
G01 X16.61056 Y32.33124
G01 X16.01945 Y32.57607
G01 X15.99588 Y32.58519
G01 X15.92727 Y32.60975
G01 X15.88699 Y32.62199
G01 X15.81838 Y32.63916
G01 X15.78338 Y32.64615
G01 X15.71478 Y32.65633
G01 X15.68277 Y32.65948
G01 X15.61417 Y32.66286
G01 X15.59865 Y32.66324
G01 X14.92684 Y32.66324
G01 X14.91130 Y32.66362
G01 X14.84267 Y32.66700
G01 X14.81066 Y32.67015
G01 X14.74206 Y32.68033
G01 X14.70706 Y32.68732
G01 X14.63845 Y32.70449
G01 X14.59817 Y32.71673
G01 X14.52956 Y32.74129
G01 X14.50599 Y32.75039
G01 X13.91488 Y32.99524
G01 X13.60820 Y33.30190
G01 X13.56116 Y33.29727
G01 X13.46510 Y33.29727
G01 X13.30904 Y33.31264
G01 X13.21483 Y33.33139
G01 X13.06474 Y33.37690
G01 X12.97600 Y33.41366
G01 X12.83769 Y33.48760
G01 X12.75784 Y33.54096
G01 X12.63660 Y33.64045
G01 X12.56868 Y33.70837
G01 X12.46919 Y33.82961
G01 X12.41583 Y33.90947
G01 X12.34189 Y34.04779
G01 X12.30513 Y34.13652
G01 X12.25962 Y34.28660
G01 X12.24313 Y34.36931
G01 X12.24313 Y34.80032
G01 X12.22667 Y34.88323
G01 X12.18113 Y35.03329
G01 X12.14438 Y35.12204
G01 X12.07046 Y35.26036
G01 X12.01710 Y35.34022
G01 X11.96221 Y35.40707
G01 X12.28504 Y35.72991
G01 X12.92687 Y35.72991
G01 X12.98252 Y35.74385
G01 X13.07412 Y35.76212
G01 X13.23096 Y35.78538
G01 X13.31529 Y35.79371
G01 X13.38712 Y35.79724
G01 X13.47168 Y35.80568
G01 X13.52560 Y35.81381
G01 X13.55324 Y35.79249
G01 X13.70178 Y35.70042
G01 X13.72141 Y35.69112
G01 X13.75593 Y35.67352
G01 X13.76063 Y35.67096
G01 X13.86723 Y35.62493
G01 X13.90668 Y35.61218
G01 X13.95573 Y35.59394
G01 X13.96182 Y35.59072
G01 X14.09995 Y35.51642
G01 X14.11590 Y35.50753
G01 X14.14879 Y35.48302
G01 X14.25887 Y35.39504
G01 X14.27046 Y35.38409
G01 X14.31135 Y35.34147
G01 X14.38148 Y35.26080
G01 X14.41107 Y35.22046
G01 X14.44361 Y35.17121
G01 X14.48709 Y35.09783
G01 X14.52240 Y35.04472
G01 X14.52730 Y35.03809
G01 X14.53444 Y35.02831
G01 X14.56469 Y34.98584
G01 X14.68074 Y34.85717
G01 X14.68214 Y34.85592
G01 X14.71455 Y34.82534
G01 X14.75448 Y34.78597
G01 X14.78311 Y34.75861
G01 X14.78313 Y34.63118
G01 X14.78313 Y34.48521
G01 X14.83017 Y34.38569
G01 X14.87145 Y34.30837
G01 X14.95458 Y34.16969
G01 X14.99542 Y34.10850
G01 X15.08986 Y33.98117
G01 X15.13170 Y33.93017
G01 X15.20683 Y33.84726
G01 X15.25189 Y33.82592
G01 X15.30924 Y33.80210
G01 X15.46609 Y33.74599
G01 X15.50886 Y33.73299
G01 X15.66568 Y33.69372
G01 X15.69883 Y33.68711
G01 X15.85567 Y33.66385
G01 X15.88333 Y33.66110
G01 X16.04015 Y33.65341
G01 X16.06608 Y33.65341
G01 X16.22293 Y33.66110
G01 X16.25059 Y33.66385
G01 X16.40741 Y33.68711
G01 X16.44056 Y33.69372
G01 X16.59738 Y33.73299
G01 X16.64020 Y33.74602
G01 X16.79702 Y33.80213
G01 X16.85435 Y33.82592
G01 X17.01117 Y33.90012
G01 X17.08940 Y33.94205
G01 X17.20482 Y34.01122
G01 X17.44142 Y34.01124
G01 X17.55676 Y33.94210
G01 X17.63065 Y33.90223
G01 X17.63504 Y33.90009
G01 X17.66641 Y33.88422
G01 X17.73192 Y33.84919
G01 X17.78328 Y33.81886
G01 X17.78991 Y33.81455
G01 X17.83672 Y33.78686
G01 X17.85092 Y33.77927
G01 X17.90075 Y33.74942
G01 X17.95808 Y33.71112
G01 X17.97048 Y33.70261
G01 X17.99488 Y33.68534
G01 X18.00093 Y33.67647
G01 X18.00814 Y33.66565
G01 X18.04022 Y33.62232
G01 X18.04274 Y33.61927
G01 X18.05849 Y33.59910
G01 X18.08229 Y33.56702
G01 X18.11315 Y33.52938
G01 X18.15927 Y33.47848
G01 X18.17555 Y33.46138
G01 X19.25467 Y32.38229
G01 X19.27096 Y32.36520
G01 X19.31708 Y32.31429
G01 X19.34794 Y32.27665
G01 X19.38927 Y32.22095
G01 X19.41863 Y32.17698
G01 X19.45498 Y32.11630
G01 X19.48348 Y32.06289
G01 X19.51464 Y31.99700
G01 X19.52894 Y31.96471
G01 X19.67713 Y31.60696
G01 X19.67713 Y31.54302
G01 X19.74903 Y31.48402
G01 X19.81695 Y31.41610
G01 X19.92267 Y31.28730
G01 X19.97603 Y31.20744
G01 X20.05457 Y31.06047
G01 X20.09132 Y30.97173
G01 X20.10712 Y30.91961
G01 X20.10712 Y30.20940
G01 X20.11027 Y30.20698
G01 X20.17253 Y30.15550
G01 X20.20517 Y30.12621
G01 X20.25571 Y30.07701
G01 X20.30441 Y30.02532
G01 X20.35333 Y29.96695
G01 X20.36544 Y29.95062
G01 X20.40039 Y29.89807
G01 X20.40507 Y29.89017
G01 X20.43758 Y29.84092
G01 X20.46935 Y29.79764
G01 X20.54352 Y29.71232
G01 X20.58444 Y29.66967
G01 X20.59750 Y29.65733
G01 X20.68215 Y29.58969
G01 X20.71368 Y29.56449
G01 X20.74697 Y29.53970
G01 X20.76249 Y29.53104
G01 X20.90923 Y29.45212
G01 X20.91441 Y29.44938
G01 X20.96440 Y29.43073
G01 X21.09462 Y29.38865
G01 X21.12368 Y29.38184
G01 X21.18182 Y29.37120
G01 X21.28213 Y29.35791
G01 X21.34763 Y29.35471
G01 X21.40664 Y29.35471
G01 X21.47212 Y29.35791
G01 X21.57242 Y29.37120
G01 X21.63056 Y29.38184
G01 X21.65962 Y29.38865
G01 X21.78985 Y29.43073
G01 X21.83984 Y29.44938
G01 X21.84502 Y29.45212
G01 X21.99175 Y29.53104
G01 X22.00727 Y29.53970
G01 X22.04055 Y29.56447
G01 X22.15675 Y29.65733
G01 X22.16981 Y29.66967
G01 X22.21075 Y29.71234
G01 X22.28492 Y29.79766
G01 X22.31669 Y29.84094
G01 X22.34918 Y29.89014
G01 X22.35391 Y29.89812
G01 X22.42630 Y29.99649
G01 X22.45139 Y30.02448
G01 X22.45208 Y30.02522
G01 X22.49841 Y30.07704
G01 X22.64387 Y30.20701
G01 X22.64712 Y30.20940
G01 X22.64712 Y30.91961
G01 X22.63132 Y30.97173
G01 X22.59457 Y31.06047
G01 X22.51603 Y31.20744
G01 X22.46267 Y31.28730
G01 X22.35695 Y31.41610
G01 X22.28903 Y31.48402
G01 X22.16023 Y31.58973
G01 X22.08035 Y31.64310
G01 X21.94403 Y31.71597
G01 X19.71137 Y33.94861
G01 X19.76438 Y34.04779
G01 X19.80113 Y34.13652
G01 X19.84667 Y34.28660
G01 X19.86311 Y34.36931
G01 X19.86311 Y34.75861
G01 X19.83448 Y34.78597
G01 X19.79455 Y34.82534
G01 X19.76214 Y34.85592
G01 X19.76074 Y34.85717
G01 X19.64469 Y34.98584
G01 X19.61444 Y35.02831
G01 X19.60730 Y35.03809
G01 X19.60240 Y35.04472
G01 X19.56709 Y35.09783
G01 X19.52361 Y35.17121
G01 X19.49107 Y35.22046
G01 X19.46148 Y35.26080
G01 X19.39135 Y35.34147
G01 X19.35046 Y35.38409
G01 X19.33887 Y35.39504
G01 X19.22879 Y35.48302
G01 X19.19590 Y35.50753
G01 X19.17995 Y35.51642
G01 X19.04182 Y35.59072
G01 X19.03573 Y35.59394
G01 X18.99641 Y35.60893
G01 X18.98668 Y35.61218
G01 X18.86336 Y35.65203
G01 X18.83677 Y35.65826
G01 X18.77868 Y35.66887
G01 X18.68399 Y35.68142
G01 X18.62262 Y35.68444
G01 X18.58531 Y35.68510
G01 X18.56359 Y35.68482
G01 X18.46362 Y35.69166
G01 X18.42536 Y35.69735
G01 X18.40443 Y35.70078
G01 X18.33268 Y35.71370
G01 X18.15305 Y35.76560
G01 X18.13011 Y35.77456
G01 X18.05986 Y35.74886
G01 X18.01658 Y35.73557
G01 X17.95915 Y35.72991
G01 X16.89311 Y35.72991
G01 X16.89311 Y35.55937
G01 X16.92968 Y35.52938
G01 X16.99760 Y35.46146
G01 X17.09710 Y35.34022
G01 X17.15046 Y35.26036
G01 X17.22438 Y35.12204
G01 X17.26113 Y35.03329
G01 X17.30667 Y34.88323
G01 X17.32313 Y34.80032
G01 X17.32313 Y34.36931
G01 X17.30667 Y34.28660
G01 X17.26113 Y34.13652
G01 X17.22438 Y34.04779
G01 X17.20482 Y34.01122
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.44142 Y34.01124 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.44142 Y34.01124
G01 X17.42189 Y34.04779
G01 X17.38513 Y34.13652
G01 X17.33962 Y34.28660
G01 X17.32313 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.32313 Y34.80032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.32313 Y34.80032
G01 X17.33962 Y34.88323
G01 X17.38513 Y35.03329
G01 X17.42189 Y35.12204
G01 X17.49583 Y35.26036
G01 X17.54919 Y35.34022
G01 X17.64868 Y35.46146
G01 X17.71660 Y35.52938
G01 X17.83784 Y35.62887
G01 X17.91769 Y35.68223
G01 X18.01874 Y35.73623
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.13011 Y35.77456 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.13011 Y35.77456
G01 X18.15257 Y35.83486
G01 X18.16900 Y35.88228
G01 X18.23705 Y36.09394
G01 X18.24264 Y36.11236
G01 X18.24855 Y36.13296
G01 X18.25904 Y36.20024
G01 X18.25937 Y36.21990
G01 X18.25937 Y38.01995
G01 X18.25904 Y38.03963
G01 X18.25038 Y38.09798
G01 X18.22028 Y38.17070
G01 X18.17233 Y38.23316
G01 X18.10987 Y38.28108
G01 X18.03720 Y38.31118
G01 X17.97881 Y38.31985
G01 X17.95915 Y38.32018
G01 X16.15913 Y38.32018
G01 X16.13931 Y38.31985
G01 X16.08107 Y38.31121
G01 X16.00838 Y38.28108
G01 X15.94592 Y38.23316
G01 X15.89796 Y38.17070
G01 X15.86786 Y38.09798
G01 X15.85920 Y38.03963
G01 X15.85887 Y38.01995
G01 X15.85887 Y36.98391
G01 X15.84698 Y36.86448
G01 X15.84328 Y36.84576
G01 X15.83263 Y36.82983
G01 X15.75656 Y36.73697
G01 X15.59331 Y36.57372
G01 X15.57299 Y36.55239
G01 X15.54991 Y36.52691
G01 X15.52946 Y36.49935
G01 X15.49664 Y36.45023
G01 X15.47899 Y36.42079
G01 X15.46852 Y36.39864
G01 X15.46431 Y36.38972
G01 X15.44173 Y36.33524
G01 X15.43017 Y36.30291
G01 X15.42181 Y36.26958
G01 X15.41033 Y36.21175
G01 X15.40528 Y36.17774
G01 X15.40360 Y36.14345
G01 X15.40287 Y36.11391
G01 X15.40287 Y35.63936
G01 X15.39222 Y35.52625
G01 X15.38552 Y35.49064
G01 X15.38318 Y35.47891
G01 X15.31318 Y35.40050
G01 X15.29580 Y35.38409
G01 X15.28003 Y35.36864
G01 X15.25491 Y35.34147
G01 X15.18476 Y35.26080
G01 X15.15516 Y35.22046
G01 X15.12260 Y35.17119
G01 X15.07914 Y35.09780
G01 X15.03886 Y35.03809
G01 X15.00718 Y34.99653
G01 X14.99967 Y34.98648
G01 X14.98361 Y34.96458
G01 X14.88760 Y34.85658
G01 X14.81287 Y34.78587
G01 X14.78311 Y34.75861
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.61056 Y32.33124 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.61056 Y32.33124
G01 X17.28269 Y32.33124
G01 X17.99715 Y31.61679
G01 X17.99715 Y31.54302
G01 X17.92524 Y31.48402
G01 X17.85732 Y31.41610
G01 X17.81213 Y31.36103
G01 X17.75160 Y31.28730
G01 X17.69824 Y31.20744
G01 X17.61970 Y31.06047
G01 X17.58295 Y30.97173
G01 X17.56712 Y30.91961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.38312 Y34.89496 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.38312 Y34.89496
G01 X22.34113 Y35.03329
G01 X22.30438 Y35.12204
G01 X22.23046 Y35.26036
G01 X22.17710 Y35.34022
G01 X22.07760 Y35.46146
G01 X22.00968 Y35.52938
G01 X21.97311 Y35.55937
G01 X21.97311 Y35.72991
G01 X22.52693 Y35.72991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.71433 Y35.80740 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.71433 Y35.80740
G01 X22.72457 Y35.83486
G01 X22.74100 Y35.88228
G01 X22.80905 Y36.09394
G01 X22.81464 Y36.11236
G01 X22.82055 Y36.13296
G01 X22.83104 Y36.20024
G01 X22.83137 Y36.21990
G01 X22.83137 Y38.01995
G01 X22.83104 Y38.03963
G01 X22.82238 Y38.09798
G01 X22.79228 Y38.17070
G01 X22.74433 Y38.23316
G01 X22.68187 Y38.28108
G01 X22.60920 Y38.31118
G01 X22.55081 Y38.31985
G01 X22.53112 Y38.32018
G01 X20.73110 Y38.32018
G01 X20.71131 Y38.31985
G01 X20.65307 Y38.31121
G01 X20.58038 Y38.28108
G01 X20.51792 Y38.23316
G01 X20.46996 Y38.17070
G01 X20.43986 Y38.09798
G01 X20.43120 Y38.03963
G01 X20.43087 Y38.01995
G01 X20.43087 Y36.21990
G01 X20.43120 Y36.20024
G01 X20.43986 Y36.14187
G01 X20.44959 Y36.11528
G01 X20.45627 Y36.09895
G01 X20.47746 Y36.04939
G01 X20.47806 Y36.04355
G01 X20.47994 Y36.02442
G01 X20.48287 Y35.96521
G01 X20.48287 Y35.63936
G01 X20.47222 Y35.52625
G01 X20.46552 Y35.49064
G01 X20.46318 Y35.47891
G01 X20.39318 Y35.40050
G01 X20.37580 Y35.38409
G01 X20.36003 Y35.36864
G01 X20.33491 Y35.34147
G01 X20.26476 Y35.26080
G01 X20.23516 Y35.22046
G01 X20.20260 Y35.17119
G01 X20.15914 Y35.09780
G01 X20.11886 Y35.03809
G01 X20.08718 Y34.99653
G01 X20.07967 Y34.98648
G01 X20.06361 Y34.96458
G01 X19.96760 Y34.85658
G01 X19.89287 Y34.78587
G01 X19.86311 Y34.75861
G01 X19.86313 Y34.63118
G01 X19.86313 Y34.53862
G01 X19.86311 Y34.38107
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.86311 Y34.36931 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.86311 Y34.36931
G01 X19.87962 Y34.28660
G01 X19.92513 Y34.13652
G01 X19.96189 Y34.04779
G01 X20.03583 Y33.90947
G01 X20.08919 Y33.82961
G01 X20.18868 Y33.70837
G01 X20.25660 Y33.64045
G01 X20.37784 Y33.54096
G01 X20.45769 Y33.48760
G01 X20.59600 Y33.41366
G01 X20.68474 Y33.37690
G01 X20.83483 Y33.33139
G01 X20.92904 Y33.31264
G01 X21.08510 Y33.29727
G01 X21.18116 Y33.29727
G01 X21.33725 Y33.31264
G01 X21.43145 Y33.33139
G01 X21.58152 Y33.37690
G01 X21.67026 Y33.41366
G01 X21.80857 Y33.48760
G01 X21.88845 Y33.54096
G01 X21.97887 Y33.61518
G01 X22.00968 Y33.64045
G01 X22.07760 Y33.70837
G01 X22.17710 Y33.82961
G01 X22.23046 Y33.90947
G01 X22.30438 Y34.04779
G01 X22.34113 Y34.13652
G01 X22.38309 Y34.27484
G01 X22.38492 Y34.28719
G01 X22.39429 Y34.38193
G01 X22.40199 Y34.53875
G01 X22.40199 Y34.63108
G01 X22.39429 Y34.78792
G01 X22.38492 Y34.88269
G01 X22.38312 Y34.89496
G01 X22.38314 Y35.38490
G01 X22.39256 Y35.48051
G01 X22.42043 Y35.57243
G01 X22.46572 Y35.65714
G01 X22.52401 Y35.72818
G01 X22.52693 Y35.72991
G01 X22.52696 Y35.72991
G01 X22.53112 Y35.73237
G01 X22.71433 Y35.80740
G01 X22.87313 Y35.74296
G01 X23.00034 Y35.70451
G01 X23.03785 Y35.69704
G01 X23.15731 Y35.68515
G01 X24.47313 Y35.68515
G01 X24.49287 Y35.68485
G01 X24.50066 Y35.68404
G01 X24.55113 Y35.67619
G01 X24.55837 Y35.67367
G01 X24.67366 Y35.63291
G01 X24.71118 Y35.61840
G01 X24.94115 Y35.52183
G01 X24.95372 Y35.48051
G01 X24.96315 Y35.38490
G01 X24.96315 Y33.78490
G01 X24.95372 Y33.68932
G01 X24.92583 Y33.59740
G01 X24.88055 Y33.51269
G01 X24.81961 Y33.43842
G01 X24.74537 Y33.37749
G01 X24.66066 Y33.33220
G01 X24.63013 Y33.32295
G01 X24.63013 Y31.63657
G01 X24.70023 Y31.58973
G01 X24.82903 Y31.48402
G01 X24.89695 Y31.41610
G01 X25.00267 Y31.28730
G01 X25.05603 Y31.20744
G01 X25.13457 Y31.06047
G01 X25.17132 Y30.97173
G01 X25.18712 Y30.91961
G01 X25.18712 Y30.20940
G01 X25.19027 Y30.20698
G01 X25.25253 Y30.15550
G01 X25.28517 Y30.12621
G01 X25.33571 Y30.07701
G01 X25.38441 Y30.02532
G01 X25.43333 Y29.96695
G01 X25.44544 Y29.95062
G01 X25.48039 Y29.89807
G01 X25.48507 Y29.89017
G01 X25.51758 Y29.84092
G01 X25.54935 Y29.79764
G01 X25.62352 Y29.71232
G01 X25.66444 Y29.66967
G01 X25.67750 Y29.65733
G01 X25.76215 Y29.58969
G01 X25.79368 Y29.56449
G01 X25.82697 Y29.53970
G01 X25.84249 Y29.53104
G01 X25.98923 Y29.45212
G01 X25.99441 Y29.44938
G01 X26.04440 Y29.43073
G01 X26.17462 Y29.38865
G01 X26.20368 Y29.38184
G01 X26.26182 Y29.37120
G01 X26.36213 Y29.35791
G01 X26.42763 Y29.35471
G01 X26.48664 Y29.35471
G01 X26.55212 Y29.35791
G01 X26.65242 Y29.37120
G01 X26.71056 Y29.38184
G01 X26.73962 Y29.38865
G01 X26.86985 Y29.43073
G01 X26.91984 Y29.44938
G01 X26.92502 Y29.45212
G01 X27.07175 Y29.53104
G01 X27.08727 Y29.53970
G01 X27.12055 Y29.56447
G01 X27.23675 Y29.65733
G01 X27.24981 Y29.66967
G01 X27.29075 Y29.71234
G01 X27.36492 Y29.79766
G01 X27.39669 Y29.84094
G01 X27.42918 Y29.89014
G01 X27.43391 Y29.89812
G01 X27.50630 Y29.99649
G01 X27.53139 Y30.02448
G01 X27.53208 Y30.02522
G01 X27.57841 Y30.07704
G01 X27.72387 Y30.20701
G01 X27.72712 Y30.20940
G01 X27.72712 Y30.55423
G01 X27.79888 Y30.70597
G01 X27.83319 Y30.77025
G01 X27.92148 Y30.91757
G01 X27.95450 Y30.96705
G01 X28.05486 Y31.10236
G01 X28.08790 Y31.14264
G01 X28.19994 Y31.26624
G01 X28.23512 Y31.30142
G01 X28.35872 Y31.41346
G01 X28.39900 Y31.44650
G01 X28.53431 Y31.54683
G01 X28.58379 Y31.57985
G01 X28.73113 Y31.66817
G01 X28.79540 Y31.70246
G01 X28.95539 Y31.77813
G01 X29.04244 Y31.81409
G01 X29.10388 Y31.83606
G01 X29.13771 Y31.83274
G01 X31.00416 Y33.69918
G01 X31.03979 Y33.73149
G01 X31.09283 Y33.77500
G01 X31.17268 Y33.82836
G01 X31.23319 Y33.86072
G01 X31.24045 Y33.86372
G01 X31.29112 Y33.85092
G01 X31.34020 Y33.83730
G01 X31.41917 Y33.81335
G01 X31.47116 Y33.79580
G01 X31.49653 Y33.78630
G01 X31.54015 Y33.77152
G01 X31.56778 Y33.76314
G01 X31.59811 Y33.75313
G01 X31.69846 Y33.71721
G01 X31.74832 Y33.70205
G01 X31.90514 Y33.66278
G01 X31.94505 Y33.65483
G01 X32.10189 Y33.63156
G01 X32.13608 Y33.62819
G01 X32.29290 Y33.62046
G01 X32.32534 Y33.62046
G01 X32.48218 Y33.62819
G01 X32.51639 Y33.63156
G01 X32.67319 Y33.65483
G01 X32.71307 Y33.66278
G01 X32.86991 Y33.70205
G01 X32.91982 Y33.71721
G01 X33.07664 Y33.77335
G01 X33.09054 Y33.77848
G01 X33.12511 Y33.81381
G01 X33.23054 Y33.93017
G01 X33.27235 Y33.98112
G01 X33.36681 Y34.10845
G01 X33.40771 Y34.16974
G01 X33.49084 Y34.30845
G01 X33.53206 Y34.38569
G01 X33.57913 Y34.48521
G01 X33.57913 Y34.75861
G01 X33.55048 Y34.78597
G01 X33.51055 Y34.82534
G01 X33.47814 Y34.85592
G01 X33.47674 Y34.85717
G01 X33.36069 Y34.98584
G01 X33.33044 Y35.02831
G01 X33.32330 Y35.03809
G01 X33.31840 Y35.04472
G01 X33.28309 Y35.09783
G01 X33.23961 Y35.17121
G01 X33.20707 Y35.22046
G01 X33.17748 Y35.26080
G01 X33.10733 Y35.34147
G01 X33.06646 Y35.38409
G01 X33.04911 Y35.40045
G01 X32.97903 Y35.47893
G01 X32.97667 Y35.49084
G01 X32.96999 Y35.52645
G01 X32.96176 Y35.58592
G01 X32.95912 Y35.61551
G01 X32.95747 Y35.63936
G01 X32.95696 Y35.64970
G01 X32.95190 Y35.68376
G01 X32.94040 Y35.74159
G01 X32.93204 Y35.77499
G01 X32.92048 Y35.80725
G01 X32.91370 Y35.82529
G01 X32.89790 Y35.86176
G01 X32.88685 Y35.88515
G01 X32.88322 Y35.89282
G01 X32.86557 Y35.92226
G01 X32.83275 Y35.97136
G01 X32.81241 Y35.99882
G01 X32.78922 Y36.02440
G01 X32.76890 Y36.04573
G01 X32.07766 Y36.73697
G01 X32.00161 Y36.82983
G01 X31.99097 Y36.84573
G01 X31.98726 Y36.86448
G01 X31.97537 Y36.98391
G01 X31.97537 Y38.01995
G01 X31.97504 Y38.03963
G01 X31.96638 Y38.09798
G01 X31.93628 Y38.17070
G01 X31.88833 Y38.23316
G01 X31.82587 Y38.28108
G01 X31.75320 Y38.31118
G01 X31.69481 Y38.31985
G01 X31.67515 Y38.32018
G01 X29.87513 Y38.32018
G01 X29.85531 Y38.31985
G01 X29.79707 Y38.31121
G01 X29.72438 Y38.28108
G01 X29.66192 Y38.23316
G01 X29.61396 Y38.17070
G01 X29.58386 Y38.09798
G01 X29.57520 Y38.03963
G01 X29.57487 Y38.01995
G01 X29.57487 Y36.21990
G01 X29.57520 Y36.20024
G01 X29.58386 Y36.14187
G01 X29.60665 Y36.08457
G01 X29.65938 Y35.96951
G01 X29.67784 Y35.93204
G01 X29.74071 Y35.81274
G01 X29.81038 Y35.80390
G01 X29.87513 Y35.79821
G01 X29.96697 Y35.79371
G01 X30.05132 Y35.78538
G01 X30.20814 Y35.76212
G01 X30.29969 Y35.74385
G01 X30.35536 Y35.72991
G01 X30.97721 Y35.72991
G01 X31.31104 Y35.39608
G01 X31.28411 Y35.36329
G01 X31.26519 Y35.34022
G01 X31.21183 Y35.26036
G01 X31.13789 Y35.12204
G01 X31.10113 Y35.03329
G01 X31.05562 Y34.88323
G01 X31.03913 Y34.80032
G01 X31.03913 Y34.36931
G01 X31.02267 Y34.28660
G01 X30.97713 Y34.13652
G01 X30.94038 Y34.04779
G01 X30.86646 Y33.90947
G01 X30.81310 Y33.82961
G01 X30.71360 Y33.70837
G01 X30.64568 Y33.64045
G01 X30.60327 Y33.60563
G01 X30.60004 Y33.57292
G01 X30.58130 Y33.47871
G01 X30.56138 Y33.41305
G01 X30.52463 Y33.32430
G01 X30.49227 Y33.26380
G01 X30.43890 Y33.18394
G01 X30.39539 Y33.13090
G01 X30.36308 Y33.09527
G01 X29.10388 Y31.83606
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.26712 Y30.20940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.26712 Y30.20940
G01 X30.27027 Y30.20698
G01 X30.33253 Y30.15550
G01 X30.36517 Y30.12621
G01 X30.41571 Y30.07701
G01 X30.46441 Y30.02532
G01 X30.51333 Y29.96695
G01 X30.52544 Y29.95062
G01 X30.56039 Y29.89807
G01 X30.56507 Y29.89017
G01 X30.59758 Y29.84092
G01 X30.62935 Y29.79764
G01 X30.70352 Y29.71232
G01 X30.74444 Y29.66967
G01 X30.75750 Y29.65733
G01 X30.84215 Y29.58969
G01 X30.87368 Y29.56449
G01 X30.90697 Y29.53970
G01 X30.92249 Y29.53104
G01 X31.06923 Y29.45212
G01 X31.07441 Y29.44938
G01 X31.12440 Y29.43073
G01 X31.25462 Y29.38865
G01 X31.28368 Y29.38184
G01 X31.34182 Y29.37120
G01 X31.44213 Y29.35791
G01 X31.50763 Y29.35471
G01 X31.56664 Y29.35471
G01 X31.63212 Y29.35791
G01 X31.73242 Y29.37120
G01 X31.79056 Y29.38184
G01 X31.81962 Y29.38865
G01 X31.94985 Y29.43073
G01 X31.99984 Y29.44938
G01 X32.00502 Y29.45212
G01 X32.15175 Y29.53104
G01 X32.16727 Y29.53970
G01 X32.20055 Y29.56447
G01 X32.31670 Y29.65730
G01 X32.32981 Y29.66967
G01 X32.35010 Y29.68979
G01 X32.37136 Y29.71186
G01 X32.43880 Y29.77231
G01 X32.46923 Y29.79588
G01 X32.50232 Y29.81991
G01 X32.56305 Y29.86137
G01 X32.73989 Y29.95580
G01 X32.74809 Y29.95923
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.73712 Y31.09314 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.73712 Y31.09314
G01 X32.67603 Y31.20744
G01 X32.62267 Y31.28730
G01 X32.62107 Y31.28923
G01 X32.64708 Y31.31524
G01 X32.73712 Y31.31524
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.44733 Y32.99522 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.44733 Y32.99522
G01 X38.42819 Y32.99522
G01 X39.06403 Y33.63108
G01 X39.05260 Y33.64045
G01 X38.98468 Y33.70837
G01 X38.88519 Y33.82961
G01 X38.83183 Y33.90947
G01 X38.75789 Y34.04779
G01 X38.72113 Y34.13652
G01 X38.67562 Y34.28660
G01 X38.65913 Y34.36931
G01 X38.65913 Y34.75861
G01 X38.63048 Y34.78597
G01 X38.59055 Y34.82534
G01 X38.55814 Y34.85592
G01 X38.55674 Y34.85717
G01 X38.44069 Y34.98584
G01 X38.41044 Y35.02831
G01 X38.40330 Y35.03809
G01 X38.39840 Y35.04472
G01 X38.36309 Y35.09783
G01 X38.31961 Y35.17121
G01 X38.28707 Y35.22046
G01 X38.25748 Y35.26080
G01 X38.18735 Y35.34147
G01 X38.14646 Y35.38409
G01 X38.13487 Y35.39504
G01 X38.02479 Y35.48302
G01 X37.99190 Y35.50753
G01 X37.97595 Y35.51642
G01 X37.83782 Y35.59072
G01 X37.82941 Y35.59514
G01 X37.78372 Y35.61563
G01 X37.78105 Y35.61685
G01 X37.77521 Y35.61950
G01 X37.76279 Y35.62935
G01 X37.71163 Y35.67502
G01 X36.64966 Y36.73697
G01 X36.57361 Y36.82983
G01 X36.56297 Y36.84573
G01 X36.55926 Y36.86448
G01 X36.54737 Y36.98391
G01 X36.54737 Y38.01995
G01 X36.54704 Y38.03963
G01 X36.53838 Y38.09798
G01 X36.50828 Y38.17070
G01 X36.46033 Y38.23316
G01 X36.39787 Y38.28108
G01 X36.32520 Y38.31118
G01 X36.26681 Y38.31985
G01 X36.24712 Y38.32018
G01 X34.44713 Y38.32018
G01 X34.42731 Y38.31985
G01 X34.36907 Y38.31121
G01 X34.29638 Y38.28108
G01 X34.23392 Y38.23316
G01 X34.18596 Y38.17070
G01 X34.15586 Y38.09798
G01 X34.14720 Y38.03963
G01 X34.14687 Y38.01995
G01 X34.14687 Y36.21990
G01 X34.14720 Y36.20024
G01 X34.15586 Y36.14187
G01 X34.18596 Y36.06915
G01 X34.25218 Y35.98678
G01 X34.30824 Y35.93128
G01 X34.31916 Y35.92137
G01 X34.44713 Y35.80781
G01 X34.48446 Y35.77314
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.43536 Y35.72991 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.43536 Y35.72991
G01 X35.54921 Y35.72991
G01 X36.20008 Y35.07903
G01 X36.18113 Y35.03329
G01 X36.13562 Y34.88323
G01 X36.11913 Y34.80032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.57913 Y34.75861 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.57913 Y34.75861
G01 X33.60887 Y34.78587
G01 X33.68360 Y34.85658
G01 X33.77961 Y34.96458
G01 X33.79567 Y34.98648
G01 X33.80318 Y34.99653
G01 X33.83486 Y35.03809
G01 X33.87514 Y35.09780
G01 X33.91860 Y35.17119
G01 X33.95116 Y35.22046
G01 X33.98078 Y35.26080
G01 X34.05091 Y35.34147
G01 X34.09180 Y35.38411
G01 X34.10336 Y35.39501
G01 X34.17138 Y35.44937
G01 X34.20468 Y35.47599
G01 X34.21342 Y35.48312
G01 X34.23450 Y35.50065
G01 X34.24423 Y35.50855
G01 X34.25985 Y35.52099
G01 X34.36899 Y35.63118
G01 X34.37484 Y35.63852
G01 X34.39508 Y35.66301
G01 X34.42843 Y35.70171
G01 X34.48446 Y35.77314
G01 X34.56696 Y35.78538
G01 X34.65129 Y35.79371
G01 X34.80811 Y35.80141
G01 X34.89013 Y35.80141
G01 X35.04697 Y35.79371
G01 X35.13132 Y35.78538
G01 X35.28814 Y35.76212
G01 X35.37969 Y35.74385
G01 X35.43536 Y35.72991
G01 X35.52457 Y35.68223
G01 X35.60445 Y35.62887
G01 X35.72568 Y35.52938
G01 X35.79360 Y35.46146
G01 X35.89310 Y35.34022
G01 X35.94646 Y35.26036
G01 X36.02038 Y35.12204
G01 X36.05713 Y35.03329
G01 X36.10267 Y34.88323
G01 X36.11913 Y34.80032
G01 X36.11913 Y34.36931
G01 X36.10267 Y34.28660
G01 X36.05713 Y34.13652
G01 X36.02038 Y34.04779
G01 X35.94646 Y33.90947
G01 X35.89310 Y33.82961
G01 X35.87412 Y33.80649
G01 X35.79360 Y33.70837
G01 X35.72568 Y33.64045
G01 X35.60445 Y33.54096
G01 X35.52457 Y33.48760
G01 X35.38626 Y33.41366
G01 X35.29752 Y33.37690
G01 X35.14745 Y33.33139
G01 X35.05325 Y33.31264
G01 X34.89716 Y33.29727
G01 X34.80110 Y33.29727
G01 X34.75406 Y33.30190
G01 X34.44733 Y32.99522
G01 X33.76290 Y32.71173
G01 X33.74304 Y32.70406
G01 X33.67443 Y32.67950
G01 X33.64123 Y32.66941
G01 X33.57263 Y32.65224
G01 X33.54438 Y32.64660
G01 X33.47575 Y32.63642
G01 X33.45033 Y32.63390
G01 X33.38170 Y32.63052
G01 X33.36940 Y32.63022
G01 X32.29915 Y32.63022
G01 X32.28686 Y32.62994
G01 X32.21822 Y32.62656
G01 X32.19277 Y32.62405
G01 X32.12414 Y32.61386
G01 X32.09590 Y32.60822
G01 X32.02729 Y32.59105
G01 X31.99409 Y32.58097
G01 X31.92549 Y32.55641
G01 X31.90563 Y32.54874
G01 X31.83989 Y32.52151
G01 X31.12437 Y31.80599
G01 X31.10855 Y31.78938
G01 X31.06242 Y31.73848
G01 X31.03240 Y31.70190
G01 X30.99110 Y31.64620
G01 X30.96252 Y31.60337
G01 X30.92618 Y31.54272
G01 X30.89839 Y31.49065
G01 X30.88414 Y31.46052
G01 X30.87017 Y31.44823
G01 X30.74655 Y31.33619
G01 X30.70517 Y31.29481
G01 X30.59313 Y31.17119
G01 X30.55440 Y31.12400
G01 X30.45404 Y30.98867
G01 X30.41581 Y30.93142
G01 X30.32752 Y30.78410
G01 X30.28848 Y30.71092
G01 X30.26712 Y30.66576
G01 X30.26712 Y30.20940
G01 X30.26387 Y30.20701
G01 X30.11841 Y30.07704
G01 X30.07208 Y30.02522
G01 X30.07139 Y30.02448
G01 X30.04630 Y29.99649
G01 X29.97391 Y29.89812
G01 X29.96918 Y29.89014
G01 X29.93669 Y29.84094
G01 X29.90492 Y29.79766
G01 X29.83075 Y29.71234
G01 X29.78981 Y29.66967
G01 X29.77675 Y29.65733
G01 X29.66055 Y29.56447
G01 X29.62727 Y29.53970
G01 X29.61175 Y29.53104
G01 X29.46502 Y29.45212
G01 X29.45984 Y29.44938
G01 X29.40985 Y29.43073
G01 X29.27962 Y29.38865
G01 X29.25056 Y29.38184
G01 X29.19242 Y29.37120
G01 X29.09212 Y29.35791
G01 X29.02664 Y29.35471
G01 X28.96763 Y29.35471
G01 X28.90213 Y29.35791
G01 X28.80182 Y29.37120
G01 X28.74368 Y29.38184
G01 X28.71462 Y29.38865
G01 X28.58440 Y29.43073
G01 X28.53441 Y29.44938
G01 X28.52923 Y29.45212
G01 X28.38249 Y29.53104
G01 X28.36697 Y29.53970
G01 X28.33368 Y29.56449
G01 X28.30215 Y29.58969
G01 X28.21750 Y29.65733
G01 X28.20444 Y29.66967
G01 X28.16352 Y29.71232
G01 X28.08935 Y29.79764
G01 X28.05758 Y29.84092
G01 X28.02507 Y29.89017
G01 X28.02039 Y29.89807
G01 X27.98544 Y29.95062
G01 X27.97333 Y29.96695
G01 X27.92441 Y30.02532
G01 X27.87571 Y30.07701
G01 X27.82517 Y30.12621
G01 X27.79253 Y30.15550
G01 X27.73027 Y30.20698
G01 X27.72712 Y30.20940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.18712 Y30.91961 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.18712 Y30.91961
G01 X25.20295 Y30.97173
G01 X25.23970 Y31.06047
G01 X25.31824 Y31.20744
G01 X25.37160 Y31.28730
G01 X25.43213 Y31.36103
G01 X25.47732 Y31.41610
G01 X25.54524 Y31.48402
G01 X25.67404 Y31.58973
G01 X25.75392 Y31.64310
G01 X25.90086 Y31.72166
G01 X25.98961 Y31.75842
G01 X26.14907 Y31.80678
G01 X26.24328 Y31.82552
G01 X26.40912 Y31.84185
G01 X26.50515 Y31.84185
G01 X26.67099 Y31.82552
G01 X26.70978 Y31.81780
G01 X28.72372 Y33.83179
G01 X28.67183 Y33.90947
G01 X28.59789 Y34.04779
G01 X28.56113 Y34.13652
G01 X28.51562 Y34.28660
G01 X28.49911 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.29112 Y33.85092 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.29112 Y33.85092
G01 X31.24279 Y33.86314
G01 X31.21183 Y33.90947
G01 X31.13789 Y34.04779
G01 X31.10113 Y34.13652
G01 X31.05562 Y34.28660
G01 X31.03913 Y34.36931
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.03913 Y34.80032 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.03913 Y34.80032
G01 X31.02267 Y34.88323
G01 X30.97713 Y35.03329
G01 X30.94038 Y35.12204
G01 X30.86646 Y35.26036
G01 X30.81310 Y35.34022
G01 X30.71360 Y35.46146
G01 X30.64568 Y35.52938
G01 X30.52445 Y35.62887
G01 X30.44457 Y35.68223
G01 X30.35536 Y35.72991
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.74071 Y35.81274 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.74071 Y35.81274
G01 X29.72801 Y35.80253
G01 X29.57995 Y35.70586
G01 X29.56339 Y35.69750
G01 X29.52900 Y35.67885
G01 X29.52072 Y35.67405
G01 X29.40832 Y35.62287
G01 X29.40545 Y35.62191
G01 X29.39743 Y35.61927
G01 X29.37558 Y35.61218
G01 X29.32654 Y35.59394
G01 X29.32041 Y35.59069
G01 X29.18229 Y35.51640
G01 X29.16636 Y35.50753
G01 X29.13350 Y35.48305
G01 X29.02339 Y35.39504
G01 X29.01180 Y35.38409
G01 X28.97091 Y35.34147
G01 X28.90076 Y35.26080
G01 X28.87116 Y35.22046
G01 X28.83860 Y35.17119
G01 X28.79514 Y35.09780
G01 X28.75486 Y35.03809
G01 X28.72318 Y34.99653
G01 X28.71567 Y34.98648
G01 X28.69961 Y34.96458
G01 X28.60360 Y34.85658
G01 X28.52887 Y34.78587
G01 X28.49911 Y34.75861
G01 X28.49911 Y34.53862
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.16911 Y35.75104 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.16911 Y35.75104
G01 X25.20754 Y35.73933
G01 X25.30313 Y35.72991
G01 X26.38913 Y35.72991
G01 X26.38913 Y35.55935
G01 X26.35260 Y35.52938
G01 X26.28468 Y35.46146
G01 X26.18519 Y35.34022
G01 X26.13183 Y35.26036
G01 X26.05789 Y35.12204
G01 X26.02113 Y35.03329
G01 X25.97562 Y34.88323
G01 X25.95687 Y34.78902
G01 X25.94150 Y34.63293
G01 X25.94150 Y34.53690
G01 X25.95687 Y34.38081
G01 X25.97562 Y34.28660
G01 X26.02113 Y34.13652
G01 X26.05789 Y34.04779
G01 X26.13183 Y33.90947
G01 X26.18519 Y33.82961
G01 X26.28468 Y33.70837
G01 X26.35260 Y33.64045
G01 X26.47384 Y33.54096
G01 X26.55369 Y33.48760
G01 X26.69200 Y33.41366
G01 X26.78074 Y33.37690
G01 X26.93083 Y33.33139
G01 X27.02504 Y33.31264
G01 X27.18110 Y33.29727
G01 X27.27716 Y33.29727
G01 X27.43325 Y33.31264
G01 X27.52745 Y33.33139
G01 X27.67752 Y33.37690
G01 X27.76626 Y33.41366
G01 X27.90457 Y33.48760
G01 X27.98445 Y33.54096
G01 X28.10568 Y33.64045
G01 X28.17360 Y33.70837
G01 X28.27310 Y33.82961
G01 X28.32646 Y33.90947
G01 X28.40038 Y34.04779
G01 X28.43713 Y34.13652
G01 X28.48267 Y34.28660
G01 X28.49911 Y34.36931
G01 X28.49911 Y34.53862
G01 X28.49913 Y34.63118
G01 X28.49911 Y34.75861
G01 X28.47048 Y34.78597
G01 X28.43055 Y34.82534
G01 X28.39814 Y34.85592
G01 X28.39674 Y34.85717
G01 X28.28069 Y34.98584
G01 X28.25044 Y35.02831
G01 X28.24330 Y35.03809
G01 X28.23840 Y35.04472
G01 X28.20309 Y35.09783
G01 X28.15961 Y35.17121
G01 X28.12707 Y35.22046
G01 X28.09748 Y35.26080
G01 X28.02733 Y35.34147
G01 X27.98646 Y35.38409
G01 X27.96911 Y35.40045
G01 X27.89903 Y35.47893
G01 X27.89667 Y35.49084
G01 X27.88999 Y35.52645
G01 X27.87937 Y35.63936
G01 X27.87937 Y36.09392
G01 X27.87863 Y36.12346
G01 X27.87696 Y36.15770
G01 X27.87190 Y36.19176
G01 X27.86040 Y36.24959
G01 X27.85204 Y36.28292
G01 X27.84048 Y36.31525
G01 X27.81790 Y36.36976
G01 X27.80325 Y36.40077
G01 X27.78557 Y36.43026
G01 X27.75275 Y36.47936
G01 X27.73233 Y36.50690
G01 X27.70922 Y36.53240
G01 X27.68890 Y36.55373
G01 X27.62273 Y36.61992
G01 X27.50569 Y36.73694
G01 X27.42961 Y36.82983
G01 X27.41897 Y36.84573
G01 X27.41526 Y36.86448
G01 X27.40337 Y36.98391
G01 X27.40337 Y38.01995
G01 X27.40304 Y38.03963
G01 X27.39438 Y38.09798
G01 X27.36428 Y38.17070
G01 X27.31633 Y38.23316
G01 X27.25387 Y38.28108
G01 X27.18120 Y38.31118
G01 X27.12281 Y38.31985
G01 X27.10315 Y38.32018
G01 X25.30313 Y38.32018
G01 X25.28331 Y38.31985
G01 X25.22507 Y38.31121
G01 X25.15238 Y38.28108
G01 X25.08992 Y38.23316
G01 X25.04196 Y38.17070
G01 X25.01186 Y38.09798
G01 X25.00320 Y38.03963
G01 X25.00287 Y38.01995
G01 X25.00287 Y36.21990
G01 X25.00320 Y36.20024
G01 X25.01184 Y36.14192
G01 X25.01562 Y36.13110
G01 X25.05720 Y36.01589
G01 X25.07199 Y35.97837
G01 X25.16911 Y35.75104
G01 X25.14511 Y35.70613
G01 X25.08418 Y35.63186
G01 X25.05766 Y35.60535
G01 X24.98339 Y35.54441
G01 X24.94115 Y35.52183
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.38492 Y34.28719 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.38492 Y34.28719
G01 X22.38314 Y34.27510
G01 X22.38314 Y33.78490
G01 X22.39256 Y33.68932
G01 X22.42043 Y33.59740
G01 X22.46572 Y33.51269
G01 X22.52665 Y33.43842
G01 X22.60090 Y33.37749
G01 X22.68563 Y33.33220
G01 X22.77755 Y33.30434
G01 X22.87313 Y33.29491
G01 X22.95015 Y33.29491
G01 X22.95015 Y31.42893
G01 X22.93732 Y31.41610
G01 X22.89213 Y31.36103
G01 X22.83160 Y31.28730
G01 X22.77824 Y31.20744
G01 X22.69970 Y31.06047
G01 X22.66295 Y30.97173
G01 X22.64712 Y30.91961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.18712 Y30.20940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.18712 Y30.20940
G01 X25.18387 Y30.20701
G01 X25.03841 Y30.07704
G01 X24.99208 Y30.02522
G01 X24.99139 Y30.02448
G01 X24.96630 Y29.99649
G01 X24.89391 Y29.89812
G01 X24.88918 Y29.89014
G01 X24.85669 Y29.84094
G01 X24.82492 Y29.79766
G01 X24.75075 Y29.71234
G01 X24.70981 Y29.66967
G01 X24.69675 Y29.65733
G01 X24.58055 Y29.56447
G01 X24.54727 Y29.53970
G01 X24.53175 Y29.53104
G01 X24.38502 Y29.45212
G01 X24.37984 Y29.44938
G01 X24.32985 Y29.43073
G01 X24.19962 Y29.38865
G01 X24.17056 Y29.38184
G01 X24.11242 Y29.37120
G01 X24.01212 Y29.35791
G01 X23.94664 Y29.35471
G01 X23.88763 Y29.35471
G01 X23.82213 Y29.35791
G01 X23.72182 Y29.37120
G01 X23.66368 Y29.38184
G01 X23.63462 Y29.38865
G01 X23.50440 Y29.43073
G01 X23.45441 Y29.44938
G01 X23.44923 Y29.45212
G01 X23.30249 Y29.53104
G01 X23.28697 Y29.53970
G01 X23.25368 Y29.56449
G01 X23.22215 Y29.58969
G01 X23.13750 Y29.65733
G01 X23.12444 Y29.66967
G01 X23.08352 Y29.71232
G01 X23.00935 Y29.79764
G01 X22.97758 Y29.84092
G01 X22.94507 Y29.89017
G01 X22.94039 Y29.89807
G01 X22.90544 Y29.95062
G01 X22.89333 Y29.96695
G01 X22.84441 Y30.02532
G01 X22.79571 Y30.07701
G01 X22.74517 Y30.12621
G01 X22.71253 Y30.15550
G01 X22.65027 Y30.20698
G01 X22.64712 Y30.20940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.67713 Y31.60696 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.67713 Y31.60696
G01 X20.18198 Y31.10216
G01 X20.15970 Y31.06047
G01 X20.12295 Y30.97173
G01 X20.10712 Y30.91961
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.10712 Y30.20940 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.10712 Y30.20940
G01 X20.10387 Y30.20701
G01 X19.95841 Y30.07704
G01 X19.91208 Y30.02522
G01 X19.91139 Y30.02448
G01 X19.88630 Y29.99649
G01 X19.81391 Y29.89812
G01 X19.80918 Y29.89014
G01 X19.77669 Y29.84094
G01 X19.74492 Y29.79766
G01 X19.67075 Y29.71234
G01 X19.62981 Y29.66967
G01 X19.61675 Y29.65733
G01 X19.50055 Y29.56447
G01 X19.46727 Y29.53970
G01 X19.45175 Y29.53104
G01 X19.30502 Y29.45212
G01 X19.29984 Y29.44938
G01 X19.24985 Y29.43073
G01 X19.11962 Y29.38865
G01 X19.09056 Y29.38184
G01 X19.03242 Y29.37120
G01 X18.93212 Y29.35791
G01 X18.86664 Y29.35471
G01 X18.80763 Y29.35471
G01 X18.74213 Y29.35791
G01 X18.64182 Y29.37120
G01 X18.58368 Y29.38184
G01 X18.55462 Y29.38865
G01 X18.42440 Y29.43073
G01 X18.37441 Y29.44938
G01 X18.36923 Y29.45212
G01 X18.22249 Y29.53104
G01 X18.20697 Y29.53970
G01 X18.17368 Y29.56449
G01 X18.14215 Y29.58969
G01 X18.05750 Y29.65733
G01 X18.04444 Y29.66967
G01 X18.00352 Y29.71232
G01 X17.92935 Y29.79764
G01 X17.89758 Y29.84092
G01 X17.86507 Y29.89017
G01 X17.86039 Y29.89807
G01 X17.82544 Y29.95062
G01 X17.81333 Y29.96695
G01 X17.76441 Y30.02532
G01 X17.71571 Y30.07701
G01 X17.66517 Y30.12621
G01 X17.63253 Y30.15550
G01 X17.57027 Y30.20698
G01 X17.56712 Y30.20940
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.08181 Y22.09501 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.08181 Y22.09501
G01 X13.08077 Y22.09280
G01 X13.08766 Y22.07035
G01 X13.10201 Y22.03570
G01 X13.10424 Y22.03151
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.23312 Y21.02379 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.23312 Y21.02379
G01 X12.24961 Y21.10667
G01 X12.29512 Y21.25676
G01 X12.33190 Y21.34548
G01 X12.40582 Y21.48381
G01 X12.45918 Y21.56367
G01 X12.55868 Y21.68490
G01 X12.62659 Y21.75282
G01 X12.74783 Y21.85231
G01 X12.82769 Y21.90568
G01 X12.96601 Y21.97962
G01 X13.05476 Y22.01637
G01 X13.10424 Y22.03151
G01 X13.22934 Y21.98109
G01 X13.31145 Y21.95404
G01 X13.43129 Y21.92531
G01 X13.46954 Y21.91965
G01 X13.47249 Y21.91922
G01 X13.53294 Y21.91053
G01 X13.58936 Y21.90512
G01 X13.59398 Y21.90489
G01 X13.68872 Y21.89232
G01 X13.74676 Y21.88170
G01 X13.77338 Y21.87548
G01 X13.89667 Y21.83563
G01 X13.94572 Y21.81739
G01 X13.95181 Y21.81416
G01 X14.08991 Y21.73989
G01 X14.10589 Y21.73098
G01 X14.13876 Y21.70649
G01 X14.24887 Y21.61848
G01 X14.26042 Y21.60756
G01 X14.30137 Y21.56491
G01 X14.37150 Y21.48424
G01 X14.40111 Y21.44388
G01 X14.40157 Y21.44322
G01 X14.43365 Y21.39463
G01 X14.47714 Y21.32123
G01 X14.51224 Y21.26839
G01 X14.51732 Y21.26156
G01 X14.52425 Y21.25199
G01 X14.55468 Y21.20929
G01 X14.67076 Y21.08061
G01 X14.67213 Y21.07937
G01 X14.70454 Y21.04879
G01 X14.74440 Y21.00949
G01 X14.77312 Y20.98203
G01 X14.77312 Y20.66974
G01 X14.80264 Y20.60736
G01 X14.84549 Y20.52704
G01 X14.92860 Y20.38836
G01 X14.97129 Y20.32440
G01 X15.06576 Y20.19705
G01 X15.10952 Y20.14368
G01 X15.18128 Y20.06451
G01 X15.23136 Y20.04081
G01 X15.29136 Y20.01589
G01 X15.44818 Y19.95979
G01 X15.49329 Y19.94607
G01 X15.65013 Y19.90678
G01 X15.68557 Y19.89971
G01 X15.84239 Y19.87645
G01 X15.87223 Y19.87350
G01 X16.02908 Y19.86581
G01 X16.05719 Y19.86581
G01 X16.21401 Y19.87350
G01 X16.24386 Y19.87645
G01 X16.40070 Y19.89971
G01 X16.43616 Y19.90678
G01 X16.59298 Y19.94607
G01 X16.63807 Y19.95979
G01 X16.79489 Y20.01589
G01 X16.85483 Y20.04079
G01 X17.01168 Y20.11495
G01 X17.09280 Y20.15846
G01 X17.18297 Y20.21252
G01 X17.21439 Y20.27124
G01 X17.25115 Y20.35999
G01 X17.29666 Y20.51005
G01 X17.31312 Y20.59278
G01 X17.31312 Y21.02379
G01 X17.29666 Y21.10667
G01 X17.25115 Y21.25676
G01 X17.21439 Y21.34548
G01 X17.14045 Y21.48381
G01 X17.08709 Y21.56367
G01 X16.98760 Y21.68490
G01 X16.91968 Y21.75282
G01 X16.86098 Y21.80098
G01 X16.86098 Y21.96727
G01 X16.86847 Y21.97477
G01 X17.01112 Y21.96072
G01 X17.10715 Y21.96072
G01 X17.22013 Y21.97185
G01 X17.28274 Y21.97802
G01 X17.37695 Y21.99676
G01 X17.53073 Y22.04337
G01 X17.53075 Y22.04340
G01 X17.54104 Y22.06377
G01 X17.59717 Y22.15457
G01 X17.60593 Y22.16849
G01 X17.62915 Y22.20464
G01 X17.71259 Y22.31292
G01 X17.75623 Y22.35988
G01 X17.77088 Y22.37512
G01 X17.78653 Y22.39084
G01 X17.83801 Y22.43705
G01 X17.87263 Y22.46471
G01 X17.88719 Y22.47845
G01 X17.90393 Y22.49488
G01 X17.92813 Y22.52112
G01 X18.00637 Y22.61111
G01 X18.04025 Y22.65732
G01 X18.07279 Y22.70654
G01 X18.11459 Y22.77715
G01 X18.15590 Y22.86217
G01 X18.17903 Y22.91645
G01 X18.19460 Y22.95856
G01 X18.22989 Y23.08538
G01 X18.24292 Y23.14314
G01 X18.24424 Y23.15061
G01 X18.25948 Y23.31881
G01 X18.26143 Y23.34837
G01 X18.25948 Y23.37799
G01 X18.24424 Y23.54614
G01 X18.24292 Y23.55361
G01 X18.22989 Y23.61137
G01 X18.19460 Y23.73819
G01 X18.17903 Y23.78030
G01 X18.15590 Y23.83458
G01 X18.11459 Y23.91959
G01 X18.07279 Y23.99021
G01 X18.04027 Y24.03941
G01 X18.00637 Y24.08563
G01 X17.92813 Y24.17563
G01 X17.88716 Y24.21832
G01 X17.87261 Y24.23207
G01 X17.75036 Y24.32975
G01 X17.71665 Y24.35482
G01 X17.70157 Y24.36323
G01 X17.54619 Y24.44680
G01 X17.54190 Y24.44906
G01 X17.49100 Y24.46811
G01 X17.35389 Y24.51243
G01 X17.32232 Y24.51982
G01 X17.31780 Y24.52086
G01 X17.26420 Y24.53044
G01 X17.15826 Y24.54449
G01 X17.08864 Y24.54789
G01 X17.02963 Y24.54789
G01 X16.95999 Y24.54449
G01 X16.85404 Y24.53044
G01 X16.83708 Y24.52795
G01 X16.79593 Y24.51982
G01 X16.76438 Y24.51243
G01 X16.62725 Y24.46811
G01 X16.57632 Y24.44906
G01 X16.57205 Y24.44677
G01 X16.41668 Y24.36321
G01 X16.40157 Y24.35482
G01 X16.36786 Y24.32975
G01 X16.24564 Y24.23204
G01 X16.23108 Y24.21832
G01 X16.19016 Y24.17565
G01 X16.11188 Y24.08563
G01 X16.07800 Y24.03943
G01 X16.04546 Y23.99018
G01 X16.00363 Y23.91957
G01 X15.96235 Y23.83456
G01 X15.93921 Y23.78030
G01 X15.92364 Y23.73819
G01 X15.88836 Y23.61137
G01 X15.87533 Y23.55361
G01 X15.87401 Y23.54614
G01 X15.85877 Y23.37799
G01 X15.85681 Y23.34840
G01 X15.85877 Y23.31881
G01 X15.86487 Y23.25155
G01 X15.86494 Y23.14213
G01 X15.86390 Y23.13021
G01 X15.86222 Y23.10578
G01 X15.85486 Y23.09371
G01 X15.77289 Y22.98703
G01 X15.77010 Y22.98411
G01 X15.76169 Y22.97555
G01 X15.56118 Y22.77502
G01 X15.54086 Y22.75368
G01 X15.51775 Y22.72821
G01 X15.49733 Y22.70065
G01 X15.46451 Y22.65155
G01 X15.44688 Y22.62214
G01 X15.43637 Y22.59991
G01 X15.43218 Y22.59102
G01 X15.40960 Y22.53654
G01 X15.39801 Y22.50418
G01 X15.38968 Y22.47088
G01 X15.37818 Y22.41304
G01 X15.37312 Y22.37903
G01 X15.37145 Y22.34474
G01 X15.37073 Y22.31523
G01 X15.37073 Y21.83873
G01 X15.36007 Y21.72564
G01 X15.35336 Y21.69003
G01 X15.35214 Y21.68371
G01 X15.28577 Y21.60761
G01 X15.27935 Y21.60139
G01 X15.24485 Y21.56489
G01 X15.17477 Y21.48427
G01 X15.14513 Y21.44386
G01 X15.11265 Y21.39468
G01 X15.06916 Y21.32128
G01 X15.02893 Y21.26161
G01 X14.99713 Y21.21988
G01 X14.98963 Y21.20987
G01 X14.97353 Y21.18793
G01 X14.87754 Y21.07998
G01 X14.80297 Y21.00936
G01 X14.77312 Y20.98203
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X13.88273 Y19.19654 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X13.88273 Y19.19654
G01 X13.55789 Y19.52138
G01 X13.55115 Y19.52072
G01 X13.45512 Y19.52072
G01 X13.29903 Y19.53609
G01 X13.20483 Y19.55483
G01 X13.05476 Y19.60035
G01 X12.96601 Y19.63713
G01 X12.90099 Y19.67185
G01 X12.82769 Y19.71104
G01 X12.74783 Y19.76441
G01 X12.62659 Y19.86390
G01 X12.55868 Y19.93182
G01 X12.45918 Y20.05305
G01 X12.40582 Y20.13291
G01 X12.33190 Y20.27124
G01 X12.29512 Y20.35999
G01 X12.24961 Y20.51005
G01 X12.23312 Y20.59278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.69312 Y20.98203 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.69312 Y20.98203
G01 X9.72297 Y21.00936
G01 X9.79754 Y21.07998
G01 X9.89353 Y21.18793
G01 X9.90963 Y21.20987
G01 X9.91713 Y21.21988
G01 X9.94893 Y21.26161
G01 X9.98916 Y21.32128
G01 X10.03265 Y21.39468
G01 X10.06513 Y21.44386
G01 X10.09477 Y21.48427
G01 X10.16485 Y21.56489
G01 X10.19935 Y21.60139
G01 X10.20577 Y21.60761
G01 X10.27214 Y21.68371
G01 X10.27336 Y21.69003
G01 X10.28007 Y21.72564
G01 X10.28990 Y21.80723
G01 X10.29155 Y21.83873
G01 X10.29312 Y21.87101
G01 X10.29818 Y21.90504
G01 X10.30968 Y21.96288
G01 X10.31342 Y21.97776
G01 X10.31804 Y21.99623
G01 X10.32960 Y22.02854
G01 X10.35218 Y22.08305
G01 X10.36686 Y22.11409
G01 X10.38451 Y22.14355
G01 X10.41733 Y22.19265
G01 X10.43775 Y22.22021
G01 X10.46086 Y22.24568
G01 X10.48118 Y22.26702
G01 X11.18969 Y22.97555
G01 X11.19810 Y22.98411
G01 X11.20089 Y22.98703
G01 X11.28286 Y23.09371
G01 X11.29022 Y23.10578
G01 X11.29190 Y23.13021
G01 X11.29294 Y23.14213
G01 X11.29287 Y23.25155
G01 X11.28677 Y23.31881
G01 X11.28481 Y23.34840
G01 X11.28677 Y23.37799
G01 X11.30201 Y23.54614
G01 X11.30333 Y23.55361
G01 X11.31636 Y23.61137
G01 X11.35164 Y23.73819
G01 X11.36721 Y23.78030
G01 X11.39035 Y23.83456
G01 X11.43163 Y23.91957
G01 X11.47346 Y23.99018
G01 X11.50600 Y24.03943
G01 X11.53988 Y24.08563
G01 X11.61816 Y24.17565
G01 X11.65908 Y24.21832
G01 X11.67364 Y24.23204
G01 X11.79586 Y24.32975
G01 X11.82957 Y24.35482
G01 X11.84468 Y24.36321
G01 X12.00005 Y24.44677
G01 X12.00432 Y24.44906
G01 X12.05525 Y24.46811
G01 X12.19238 Y24.51243
G01 X12.22393 Y24.51982
G01 X12.26508 Y24.52795
G01 X12.28204 Y24.53044
G01 X12.38799 Y24.54449
G01 X12.45763 Y24.54789
G01 X12.51664 Y24.54789
G01 X12.58626 Y24.54449
G01 X12.69220 Y24.53044
G01 X12.74580 Y24.52086
G01 X12.75032 Y24.51982
G01 X12.78189 Y24.51243
G01 X12.91900 Y24.46811
G01 X12.96990 Y24.44906
G01 X12.97419 Y24.44680
G01 X13.12957 Y24.36323
G01 X13.14465 Y24.35482
G01 X13.17836 Y24.32975
G01 X13.30061 Y24.23207
G01 X13.31516 Y24.21832
G01 X13.35613 Y24.17563
G01 X13.43437 Y24.08563
G01 X13.46827 Y24.03941
G01 X13.50079 Y23.99021
G01 X13.54259 Y23.91959
G01 X13.58390 Y23.83458
G01 X13.60703 Y23.78030
G01 X13.62260 Y23.73819
G01 X13.65789 Y23.61137
G01 X13.67092 Y23.55361
G01 X13.67224 Y23.54614
G01 X13.68748 Y23.37799
G01 X13.68943 Y23.34837
G01 X13.68748 Y23.31881
G01 X13.67224 Y23.15061
G01 X13.67092 Y23.14314
G01 X13.65789 Y23.08538
G01 X13.62260 Y22.95856
G01 X13.60703 Y22.91645
G01 X13.58390 Y22.86217
G01 X13.54259 Y22.77715
G01 X13.50079 Y22.70654
G01 X13.46825 Y22.65732
G01 X13.43437 Y22.61111
G01 X13.35613 Y22.52112
G01 X13.33190 Y22.49486
G01 X13.31547 Y22.47809
G01 X13.25570 Y22.40718
G01 X13.23406 Y22.37738
G01 X13.20521 Y22.33433
G01 X13.16441 Y22.26837
G01 X13.08184 Y22.09504
G01 X13.08181 Y22.09501
G01 X13.06253 Y22.08472
G01 X12.97379 Y22.04797
G01 X12.80495 Y21.99676
G01 X12.71074 Y21.97802
G01 X12.53515 Y21.96072
G01 X12.43912 Y21.96072
G01 X12.29647 Y21.97477
G01 X11.95222 Y21.63052
G01 X12.00709 Y21.56367
G01 X12.06045 Y21.48381
G01 X12.13439 Y21.34548
G01 X12.17115 Y21.25676
G01 X12.21666 Y21.10667
G01 X12.23312 Y21.02379
G01 X12.23312 Y20.59278
G01 X12.21666 Y20.51005
G01 X12.17115 Y20.35999
G01 X12.13439 Y20.27124
G01 X12.06045 Y20.13291
G01 X12.00709 Y20.05305
G01 X11.90760 Y19.93182
G01 X11.83968 Y19.86390
G01 X11.71844 Y19.76441
G01 X11.63859 Y19.71104
G01 X11.50026 Y19.63713
G01 X11.41153 Y19.60035
G01 X11.26145 Y19.55483
G01 X11.16724 Y19.53609
G01 X11.01115 Y19.52072
G01 X10.91512 Y19.52072
G01 X10.75903 Y19.53609
G01 X10.66483 Y19.55483
G01 X10.51476 Y19.60035
G01 X10.42601 Y19.63713
G01 X10.36099 Y19.67185
G01 X10.28769 Y19.71104
G01 X10.20783 Y19.76441
G01 X10.08659 Y19.86390
G01 X10.01868 Y19.93182
G01 X9.91918 Y20.05305
G01 X9.86582 Y20.13291
G01 X9.79190 Y20.27124
G01 X9.75512 Y20.35999
G01 X9.70961 Y20.51005
G01 X9.69312 Y20.59278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.85320 Y21.96209 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.85320 Y21.96209
G01 X7.74769 Y21.90568
G01 X7.66783 Y21.85231
G01 X7.54659 Y21.75282
G01 X7.47868 Y21.68490
G01 X7.37918 Y21.56367
G01 X7.32582 Y21.48381
G01 X7.25190 Y21.34548
G01 X7.21512 Y21.25676
G01 X7.16961 Y21.10667
G01 X7.15312 Y21.02379
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X8.41662 Y22.07619 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X8.41662 Y22.07619
G01 X8.46524 Y22.03512
G01 X8.61276 Y21.93324
G01 X8.66480 Y21.90512
G01 X8.67255 Y21.90085
G01 X8.69836 Y21.88648
G01 X8.80923 Y21.83804
G01 X8.81667 Y21.83563
G01 X8.86569 Y21.81739
G01 X8.87181 Y21.81416
G01 X9.00991 Y21.73989
G01 X9.02589 Y21.73098
G01 X9.05876 Y21.70649
G01 X9.16887 Y21.61848
G01 X9.18042 Y21.60756
G01 X9.22137 Y21.56491
G01 X9.29150 Y21.48424
G01 X9.32111 Y21.44388
G01 X9.32157 Y21.44322
G01 X9.35365 Y21.39463
G01 X9.39714 Y21.32123
G01 X9.43224 Y21.26839
G01 X9.43732 Y21.26156
G01 X9.44425 Y21.25199
G01 X9.47468 Y21.20929
G01 X9.59076 Y21.08061
G01 X9.59213 Y21.07937
G01 X9.62454 Y21.04879
G01 X9.66440 Y21.00949
G01 X9.69312 Y20.98203
G01 X9.69312 Y20.59278
G01 X9.67666 Y20.51005
G01 X9.63115 Y20.35999
G01 X9.59439 Y20.27124
G01 X9.52045 Y20.13291
G01 X9.46709 Y20.05305
G01 X9.36760 Y19.93182
G01 X9.29968 Y19.86390
G01 X9.25292 Y19.82552
G01 X9.88192 Y19.19652
G01 X13.88273 Y19.19654
G01 X14.47384 Y18.95171
G01 X14.49741 Y18.94259
G01 X14.56601 Y18.91803
G01 X14.60630 Y18.90579
G01 X14.67490 Y18.88862
G01 X14.70990 Y18.88163
G01 X14.77851 Y18.87145
G01 X14.81051 Y18.86830
G01 X14.87914 Y18.86492
G01 X14.89466 Y18.86454
G01 X15.56649 Y18.86454
G01 X15.58201 Y18.86416
G01 X15.65062 Y18.86078
G01 X15.68262 Y18.85763
G01 X15.75123 Y18.84744
G01 X15.78623 Y18.84046
G01 X15.85483 Y18.82329
G01 X15.89512 Y18.81105
G01 X15.96372 Y18.78648
G01 X15.98729 Y18.77736
G01 X16.57840 Y18.53253
G01 X16.85895 Y18.25199
G01 X16.89125 Y18.21636
G01 X16.93476 Y18.16332
G01 X16.97886 Y18.09736
G01 X16.98813 Y18.08346
G01 X17.02049 Y18.02296
G01 X17.05724 Y17.93421
G01 X17.07716 Y17.86855
G01 X17.08574 Y17.82535
G01 X17.20903 Y17.72418
G01 X17.27695 Y17.65626
G01 X17.38267 Y17.52746
G01 X17.43603 Y17.44757
G01 X17.51457 Y17.30063
G01 X17.55132 Y17.21189
G01 X17.56712 Y17.15974
G01 X17.56712 Y16.44953
G01 X17.56392 Y16.44719
G01 X17.41841 Y16.31720
G01 X17.37208 Y16.26536
G01 X17.34630 Y16.23663
G01 X17.27391 Y16.13828
G01 X17.26918 Y16.13030
G01 X17.23669 Y16.08110
G01 X17.20492 Y16.03782
G01 X17.13075 Y15.95250
G01 X17.08981 Y15.90983
G01 X17.07673 Y15.89749
G01 X16.96055 Y15.80462
G01 X16.92727 Y15.77986
G01 X16.91178 Y15.77122
G01 X16.76504 Y15.69228
G01 X16.75984 Y15.68954
G01 X16.70982 Y15.67087
G01 X16.57962 Y15.62881
G01 X16.55051 Y15.62197
G01 X16.49242 Y15.61136
G01 X16.39209 Y15.59807
G01 X16.32664 Y15.59485
G01 X16.26763 Y15.59485
G01 X16.20215 Y15.59807
G01 X16.10182 Y15.61136
G01 X16.04373 Y15.62197
G01 X16.01462 Y15.62881
G01 X15.88442 Y15.67087
G01 X15.83441 Y15.68954
G01 X15.82920 Y15.69228
G01 X15.68247 Y15.77122
G01 X15.66697 Y15.77986
G01 X15.63368 Y15.80462
G01 X15.60218 Y15.82980
G01 X15.51752 Y15.89749
G01 X15.50444 Y15.90983
G01 X15.46352 Y15.95248
G01 X15.38933 Y16.03782
G01 X15.35758 Y16.08108
G01 X15.32507 Y16.13030
G01 X15.28557 Y16.19695
G01 X15.24655 Y16.27727
G01 X15.22339 Y16.33162
G01 X15.20891 Y16.37082
G01 X15.17543 Y16.49119
G01 X15.16240 Y16.54890
G01 X15.16136 Y16.55484
G01 X15.14686 Y16.71481
G01 X15.14490 Y16.74437
G01 X15.14686 Y16.77397
G01 X15.16136 Y16.93391
G01 X15.16240 Y16.93985
G01 X15.17543 Y16.99756
G01 X15.20891 Y17.11796
G01 X15.22339 Y17.15712
G01 X15.24655 Y17.21148
G01 X15.24897 Y17.21643
G01 X15.27343 Y17.27422
G01 X15.28039 Y17.29332
G01 X15.30302 Y17.37023
G01 X15.31887 Y17.43939
G01 X15.33088 Y17.50343
G01 X15.33505 Y17.53142
G01 X15.32753 Y17.54265
G01 X15.26372 Y17.62563
G01 X15.08531 Y17.68697
G01 X15.04780 Y17.69441
G01 X14.92844 Y17.70630
G01 X14.38760 Y17.70630
G01 X14.36850 Y17.71140
G01 X14.20188 Y17.75314
G01 X14.15313 Y17.76286
G01 X13.98649 Y17.78758
G01 X13.94399 Y17.79177
G01 X13.77739 Y17.79995
G01 X13.73688 Y17.79995
G01 X13.57026 Y17.79177
G01 X13.52776 Y17.78758
G01 X13.36111 Y17.76286
G01 X13.31237 Y17.75314
G01 X13.14575 Y17.71140
G01 X13.12664 Y17.70630
G01 X9.53399 Y17.70630
G01 X9.50445 Y17.70701
G01 X9.47016 Y17.70869
G01 X9.43615 Y17.71374
G01 X9.38990 Y17.72248
G01 X9.37832 Y17.72525
G01 X9.34499 Y17.73358
G01 X9.31266 Y17.74516
G01 X9.30008 Y17.74983
G01 X9.25815 Y17.76774
G01 X9.22711 Y17.78242
G01 X9.19765 Y17.80007
G01 X9.15693 Y17.82677
G01 X9.14855 Y17.83289
G01 X9.12099 Y17.85334
G01 X9.09551 Y17.87643
G01 X9.07418 Y17.89675
G01 X7.94118 Y19.02974
G01 X7.92086 Y19.05108
G01 X7.89778 Y19.07655
G01 X7.87733 Y19.10411
G01 X7.85048 Y19.14348
G01 X7.84451 Y19.15321
G01 X7.82686 Y19.18267
G01 X7.81218 Y19.21371
G01 X7.78960 Y19.26822
G01 X7.77804 Y19.30050
G01 X7.76968 Y19.33388
G01 X7.76265 Y19.36558
G01 X7.75818 Y19.39171
G01 X7.75472 Y19.41508
G01 X7.75312 Y19.42578
G01 X7.75145 Y19.45999
G01 X7.75073 Y19.48950
G01 X7.75073 Y19.77800
G01 X7.74009 Y19.89103
G01 X7.73339 Y19.92666
G01 X7.73214 Y19.93306
G01 X7.66580 Y20.00911
G01 X7.65932 Y20.01541
G01 X7.62485 Y20.05186
G01 X7.55477 Y20.13251
G01 X7.52513 Y20.17289
G01 X7.49265 Y20.22209
G01 X7.44916 Y20.29547
G01 X7.41385 Y20.34858
G01 X7.40895 Y20.35521
G01 X7.40181 Y20.36499
G01 X7.37156 Y20.40746
G01 X7.25551 Y20.53614
G01 X7.25411 Y20.53738
G01 X7.22170 Y20.56796
G01 X7.18185 Y20.60728
G01 X7.15312 Y20.63471
G01 X7.15312 Y21.02379
G01 X7.13666 Y21.10667
G01 X7.09115 Y21.25676
G01 X7.06633 Y21.31663
G01 X7.72447 Y21.97477
G01 X7.85320 Y21.96209
G01 X7.86752 Y21.96494
G01 X7.89125 Y21.96994
G01 X7.96074 Y21.98551
G01 X7.98271 Y21.99016
G01 X8.13725 Y22.02092
G01 X8.22056 Y22.03776
G01 X8.22315 Y22.03827
G01 X8.37771 Y22.06903
G01 X8.39447 Y22.07220
G01 X8.41662 Y22.07619
G01 X8.44324 Y22.12087
G01 X8.45774 Y22.14601
G01 X8.46547 Y22.15983
G01 X8.57070 Y22.30898
G01 X8.61426 Y22.35742
G01 X8.62269 Y22.36664
G01 X8.64194 Y22.38724
G01 X8.70669 Y22.44718
G01 X8.72861 Y22.46468
G01 X8.74319 Y22.47845
G01 X8.78411 Y22.52112
G01 X8.86237 Y22.61111
G01 X8.89625 Y22.65732
G01 X8.92879 Y22.70654
G01 X8.97059 Y22.77715
G01 X9.01190 Y22.86217
G01 X9.03503 Y22.91645
G01 X9.05060 Y22.95856
G01 X9.08589 Y23.08538
G01 X9.09892 Y23.14314
G01 X9.10024 Y23.15061
G01 X9.11548 Y23.31881
G01 X9.11743 Y23.34837
G01 X9.11548 Y23.37799
G01 X9.10024 Y23.54614
G01 X9.09892 Y23.55361
G01 X9.08589 Y23.61137
G01 X9.05060 Y23.73819
G01 X9.03503 Y23.78030
G01 X9.01190 Y23.83458
G01 X8.97059 Y23.91959
G01 X8.92879 Y23.99021
G01 X8.89627 Y24.03941
G01 X8.86237 Y24.08563
G01 X8.78413 Y24.17563
G01 X8.74316 Y24.21832
G01 X8.72861 Y24.23207
G01 X8.60636 Y24.32975
G01 X8.57265 Y24.35482
G01 X8.55757 Y24.36323
G01 X8.40219 Y24.44680
G01 X8.39790 Y24.44906
G01 X8.34700 Y24.46811
G01 X8.20989 Y24.51243
G01 X8.17832 Y24.51982
G01 X8.17380 Y24.52086
G01 X8.12020 Y24.53044
G01 X8.01426 Y24.54449
G01 X7.94464 Y24.54789
G01 X7.88563 Y24.54789
G01 X7.81599 Y24.54449
G01 X7.71004 Y24.53044
G01 X7.69308 Y24.52795
G01 X7.65193 Y24.51982
G01 X7.62038 Y24.51243
G01 X7.48325 Y24.46811
G01 X7.43232 Y24.44906
G01 X7.42805 Y24.44677
G01 X7.27268 Y24.36321
G01 X7.25757 Y24.35482
G01 X7.22386 Y24.32975
G01 X7.10164 Y24.23204
G01 X7.08708 Y24.21832
G01 X7.04616 Y24.17565
G01 X6.96788 Y24.08563
G01 X6.93400 Y24.03943
G01 X6.90146 Y23.99018
G01 X6.85963 Y23.91957
G01 X6.81835 Y23.83456
G01 X6.79521 Y23.78030
G01 X6.77964 Y23.73816
G01 X6.76806 Y23.69651
G01 X6.75493 Y23.60814
G01 X6.75147 Y23.58020
G01 X6.74870 Y23.55223
G01 X6.74868 Y23.55190
G01 X6.74197 Y23.48396
G01 X6.73372 Y23.42838
G01 X6.72353 Y23.37713
G01 X6.72051 Y23.36069
G01 X6.71431 Y23.32417
G01 X6.71477 Y23.31881
G01 X6.72087 Y23.25155
G01 X6.72094 Y23.14213
G01 X6.71990 Y23.13021
G01 X6.71822 Y23.10578
G01 X6.71086 Y23.09371
G01 X6.62889 Y22.98703
G01 X6.62610 Y22.98414
G01 X6.61769 Y22.97555
G01 X5.52341 Y21.88124
G01 X5.49133 Y21.85143
G01 X5.48063 Y21.84218
G01 X5.46804 Y21.83159
G01 X5.44375 Y21.81907
G01 X5.43448 Y21.81419
G01 X5.29636 Y21.73989
G01 X5.28033 Y21.73098
G01 X5.24749 Y21.70649
G01 X5.13738 Y21.61848
G01 X5.12582 Y21.60756
G01 X5.08485 Y21.56489
G01 X5.01477 Y21.48424
G01 X4.98513 Y21.44386
G01 X4.95265 Y21.39468
G01 X4.91551 Y21.33202
G01 X4.87876 Y21.25635
G01 X4.85559 Y21.20200
G01 X4.84221 Y21.16573
G01 X4.81051 Y21.05178
G01 X4.79748 Y20.99412
G01 X4.79669 Y20.98965
G01 X4.78295 Y20.83799
G01 X4.78099 Y20.80837
G01 X4.78295 Y20.77878
G01 X4.79669 Y20.62709
G01 X4.79748 Y20.62262
G01 X4.81051 Y20.56494
G01 X4.84221 Y20.45102
G01 X4.85559 Y20.41475
G01 X4.87876 Y20.36045
G01 X4.91554 Y20.28473
G01 X4.95262 Y20.22209
G01 X4.98513 Y20.17289
G01 X5.01477 Y20.13251
G01 X5.08485 Y20.05186
G01 X5.12585 Y20.00916
G01 X5.13738 Y19.99827
G01 X5.24751 Y19.91023
G01 X5.28036 Y19.88577
G01 X5.29631 Y19.87688
G01 X5.43443 Y19.80258
G01 X5.44053 Y19.79936
G01 X5.48958 Y19.78112
G01 X5.61289 Y19.74127
G01 X5.63949 Y19.73505
G01 X5.69753 Y19.72443
G01 X5.79227 Y19.71186
G01 X5.85361 Y19.70886
G01 X5.91269 Y19.70886
G01 X5.97398 Y19.71186
G01 X6.06872 Y19.72443
G01 X6.12676 Y19.73505
G01 X6.15335 Y19.74127
G01 X6.27667 Y19.78112
G01 X6.32572 Y19.79936
G01 X6.33184 Y19.80261
G01 X6.46996 Y19.87691
G01 X6.48589 Y19.88577
G01 X6.51873 Y19.91023
G01 X6.62887 Y19.99827
G01 X6.64040 Y20.00916
G01 X6.68137 Y20.05184
G01 X6.75147 Y20.13248
G01 X6.78109 Y20.17287
G01 X6.78619 Y20.17990
G01 X6.81365 Y20.22214
G01 X6.85714 Y20.29555
G01 X6.89740 Y20.35521
G01 X6.92907 Y20.39677
G01 X6.93661 Y20.40688
G01 X6.95264 Y20.42872
G01 X7.04868 Y20.53677
G01 X7.12330 Y20.60738
G01 X7.15312 Y20.63471
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.75747 Y17.71900 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.75747 Y17.71900
G01 X3.08028 Y17.71900
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X2.05468 Y17.71900 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X2.05468 Y17.71900
G01 X1.57904 Y16.29197
G01 X1.38857 Y15.72055
G01 X1.37561 Y15.67425
G01 X1.37343 Y15.66470
G01 X1.36142 Y15.56940
G01 X1.36116 Y15.55959
G01 X1.36797 Y15.46378
G01 X1.36962 Y15.45411
G01 X1.39499 Y15.36147
G01 X1.39850 Y15.35233
G01 X1.44145 Y15.26640
G01 X1.44666 Y15.25812
G01 X1.50556 Y15.18222
G01 X1.51229 Y15.17511
G01 X1.58486 Y15.11217
G01 X1.59286 Y15.10651
G01 X1.67632 Y15.05893
G01 X1.68527 Y15.05494
G01 X1.77640 Y15.02457
G01 X1.78595 Y15.02238
G01 X1.88125 Y15.01037
G01 X1.89106 Y15.01011
G01 X1.98686 Y15.01692
G01 X1.99654 Y15.01857
G01 X2.08918 Y15.04395
G01 X2.09832 Y15.04745
G01 X2.18425 Y15.09040
G01 X2.19253 Y15.09561
G01 X2.26842 Y15.15451
G01 X2.27554 Y15.16124
G01 X2.33848 Y15.23381
G01 X2.34414 Y15.24181
G01 X2.39172 Y15.32528
G01 X2.39570 Y15.33422
G01 X2.41313 Y15.37905
G01 X2.48054 Y15.58123
G01 X2.65448 Y15.58123
G01 X2.72189 Y15.37902
G01 X2.73931 Y15.33419
G01 X2.74330 Y15.32525
G01 X2.79088 Y15.24181
G01 X2.79654 Y15.23381
G01 X2.85948 Y15.16124
G01 X2.86662 Y15.15449
G01 X2.94249 Y15.09561
G01 X2.95079 Y15.09038
G01 X3.03670 Y15.04743
G01 X3.04587 Y15.04392
G01 X3.13850 Y15.01857
G01 X3.14818 Y15.01692
G01 X3.24399 Y15.01011
G01 X3.25379 Y15.01037
G01 X3.34909 Y15.02238
G01 X3.35864 Y15.02457
G01 X3.44978 Y15.05494
G01 X3.45872 Y15.05893
G01 X3.50672 Y15.08631
G01 X3.54216 Y15.10651
G01 X3.55016 Y15.11217
G01 X3.62273 Y15.17511
G01 X3.62948 Y15.18225
G01 X3.68836 Y15.25812
G01 X3.69359 Y15.26642
G01 X3.73654 Y15.35233
G01 X3.74005 Y15.36150
G01 X3.75181 Y15.40452
G01 X3.75163 Y15.45634
G01 X3.75166 Y15.46627
G01 X3.75183 Y15.49368
G01 X3.75186 Y15.50353
G01 X3.75168 Y15.54979
G01 X3.75161 Y15.55837
G01 X3.75148 Y15.56820
G01 X3.74559 Y15.66170
G01 X3.74449 Y15.67150
G01 X3.73812 Y15.71781
G01 X3.72933 Y15.77196
G01 X3.72936 Y17.54978
G01 X3.73172 Y17.59781
G01 X3.73266 Y17.60757
G01 X3.75140 Y17.70180
G01 X3.75425 Y17.71117
G01 X3.75747 Y17.71900
G01 X3.83977 Y17.77417
G01 X3.84957 Y17.78003
G01 X3.86161 Y17.78712
G01 X3.91742 Y17.81473
G01 X3.93121 Y17.82138
G01 X3.94101 Y17.82601
G01 X4.01180 Y17.85542
G01 X4.02158 Y17.85893
G01 X4.08757 Y17.87902
G01 X4.09738 Y17.88148
G01 X4.15976 Y17.89393
G01 X4.16956 Y17.89540
G01 X4.22971 Y17.90134
G01 X4.23954 Y17.90183
G01 X4.29923 Y17.90180
G01 X4.30903 Y17.90132
G01 X4.36911 Y17.89540
G01 X4.37891 Y17.89393
G01 X4.44129 Y17.88148
G01 X4.45110 Y17.87902
G01 X4.51709 Y17.85893
G01 X4.52686 Y17.85542
G01 X4.56156 Y17.84201
G01 X4.57495 Y17.80736
G01 X4.57845 Y17.79756
G01 X4.59857 Y17.73157
G01 X4.60101 Y17.72177
G01 X4.61348 Y17.65938
G01 X4.61493 Y17.64958
G01 X4.62087 Y17.58943
G01 X4.62135 Y17.57960
G01 X4.62209 Y17.54978
G01 X4.62209 Y15.54979
G01 X4.62135 Y15.51992
G01 X4.62087 Y15.51011
G01 X4.61493 Y15.45004
G01 X4.61348 Y15.44024
G01 X4.60101 Y15.37785
G01 X4.59857 Y15.36805
G01 X4.57845 Y15.30206
G01 X4.57495 Y15.29226
G01 X4.54556 Y15.22149
G01 X4.54094 Y15.21169
G01 X4.52974 Y15.18885
G01 X4.49969 Y15.12980
G01 X4.49430 Y15.11910
G01 X4.45844 Y15.04656
G01 X4.45844 Y15.04654
G01 X4.47215 Y15.00135
G01 X4.48650 Y14.96670
G01 X4.53177 Y14.88200
G01 X4.59270 Y14.80773
G01 X4.66697 Y14.74679
G01 X4.75168 Y14.70153
G01 X4.78633 Y14.68718
G01 X4.87825 Y14.65929
G01 X4.97385 Y14.64986
G01 X46.42764 Y14.64986
G01 X46.52322 Y14.65929
G01 X46.61515 Y14.68718
G01 X46.64979 Y14.70153
G01 X46.73450 Y14.74679
G01 X46.80877 Y14.80773
G01 X46.86971 Y14.88200
G01 X46.91497 Y14.96670
G01 X46.92932 Y15.00135
G01 X46.95721 Y15.09327
G01 X46.96663 Y15.18885
G01 X46.96663 Y19.80434
G01 X46.95718 Y19.90007
G01 X46.95345 Y19.91882
G01 X46.92556 Y20.01069
G01 X46.88030 Y20.09537
G01 X46.81939 Y20.16959
G01 X46.79287 Y20.19611
G01 X46.71860 Y20.25704
G01 X46.63389 Y20.30230
G01 X46.61505 Y20.30802
G01 X46.54197 Y20.33019
G01 X46.44639 Y20.33962
G01 X46.40887 Y20.33962
G01 X46.32546 Y20.33139
G01 X46.29915 Y20.29420
G01 X46.29915 Y20.29418
G01 X46.16044 Y20.09804
G01 X46.14492 Y20.06052
G01 X46.12566 Y20.00835
G01 X46.10316 Y19.93873
G01 X46.07027 Y19.85760
G01 X46.02234 Y19.79514
G01 X45.95988 Y19.74721
G01 X45.85960 Y19.70848
G01 X45.80700 Y19.69458
G01 X45.78165 Y19.68778
G01 X45.68238 Y19.65295
G01 X45.64657 Y19.53241
G01 X45.63910 Y19.49489
G01 X45.62721 Y19.37546
G01 X45.62721 Y18.62055
G01 X45.62650 Y18.59100
G01 X45.62483 Y18.55672
G01 X45.61977 Y18.52273
G01 X45.60827 Y18.46489
G01 X45.59993 Y18.43157
G01 X45.58835 Y18.39923
G01 X45.58370 Y18.38671
G01 X45.57822 Y18.37287
G01 X45.56577 Y18.34473
G01 X45.55107 Y18.31364
G01 X45.53344 Y18.28422
G01 X45.50065 Y18.23513
G01 X45.48017 Y18.20757
G01 X45.45711 Y18.18209
G01 X45.43677 Y18.16075
G01 X43.52176 Y16.24575
G01 X43.50042 Y16.22543
G01 X43.47495 Y16.20231
G01 X43.44739 Y16.18189
G01 X43.39829 Y16.14907
G01 X43.36882 Y16.13142
G01 X43.33779 Y16.11674
G01 X43.29588 Y16.09883
G01 X43.28328 Y16.09416
G01 X43.25097 Y16.08260
G01 X43.21762 Y16.07425
G01 X43.15978 Y16.06274
G01 X43.12580 Y16.05769
G01 X43.09151 Y16.05601
G01 X43.06197 Y16.05530
G01 X35.55213 Y16.05530
G01 X35.49289 Y16.05238
G01 X35.47377 Y16.05047
G01 X35.28309 Y16.00158
G01 X35.28167 Y16.00099
G01 X35.26671 Y15.96492
G01 X35.24179 Y15.89439
G01 X35.22619 Y15.84102
G01 X35.18827 Y15.74361
G01 X35.14034 Y15.68116
G01 X35.07791 Y15.63325
G01 X35.00516 Y15.60310
G01 X34.94677 Y15.59444
G01 X34.92713 Y15.59411
G01 X33.22714 Y15.59411
G01 X33.20748 Y15.59444
G01 X33.14908 Y15.60310
G01 X33.07634 Y15.63325
G01 X33.01390 Y15.68116
G01 X32.96600 Y15.74359
G01 X32.93217 Y15.82759
G01 X32.91093 Y15.89436
G01 X32.90484 Y15.91379
G01 X32.79082 Y16.13881
G01 X32.76463 Y16.17630
G01 X32.74809 Y16.19937
G01 X32.76483 Y16.28491
G01 X32.78955 Y16.45156
G01 X32.79793 Y16.53648
G01 X32.80611 Y16.70312
G01 X32.80611 Y16.78565
G01 X32.79793 Y16.95227
G01 X32.78955 Y17.03719
G01 X32.76483 Y17.20383
G01 X32.74639 Y17.29634
G01 X32.73712 Y17.33327
G01 X32.67603 Y17.44757
G01 X32.62996 Y17.51653
G01 X32.73712 Y17.51653
G01 X32.81495 Y17.59439
G01 X33.22714 Y17.80046
G01 X34.92713 Y17.80046
G01 X35.33927 Y17.59439
G01 X35.40262 Y17.53104
G01 X38.74397 Y17.53104
G01 X38.79075 Y17.53218
G01 X38.85936 Y17.53556
G01 X38.95430 Y17.54493
G01 X38.95827 Y17.54552
G01 X42.71404 Y17.54552
G01 X44.13700 Y18.96847
G01 X44.13700 Y19.52547
G01 X44.11355 Y19.52778
G01 X44.02163 Y19.55567
G01 X43.93690 Y19.60093
G01 X43.86265 Y19.66187
G01 X43.80172 Y19.73614
G01 X43.75643 Y19.82085
G01 X43.72856 Y19.91277
G01 X43.71914 Y20.00835
G01 X43.71914 Y20.49854
G01 X43.72092 Y20.51061
G01 X43.73029 Y20.60538
G01 X43.73799 Y20.76222
G01 X43.73799 Y20.85455
G01 X43.73029 Y21.01137
G01 X43.72092 Y21.10611
G01 X43.71912 Y21.11841
G01 X43.71912 Y21.23489
G01 X43.72717 Y21.24538
G01 X43.88404 Y21.54845
G01 X43.89407 Y21.58597
G01 X43.89966 Y21.60840
G01 X43.91698 Y21.68386
G01 X43.94797 Y21.75915
G01 X43.99592 Y21.82161
G01 X44.05836 Y21.86954
G01 X44.13105 Y21.89963
G01 X44.18940 Y21.90830
G01 X44.20913 Y21.90863
G01 X45.80910 Y21.90863
G01 X45.82881 Y21.90830
G01 X45.88718 Y21.89963
G01 X45.95988 Y21.86954
G01 X46.01776 Y21.82557
G01 X46.02239 Y21.82155
G01 X46.07024 Y21.75917
G01 X46.10316 Y21.67804
G01 X46.12208 Y21.61945
G01 X46.12556 Y21.60840
G01 X46.12800 Y21.60037
G01 X46.23138 Y21.38762
G01 X46.25645 Y21.35013
G01 X46.29915 Y21.31066
G01 X46.32795 Y21.28407
G01 X46.33204 Y21.28282
G01 X46.42762 Y21.27340
G01 X46.52322 Y21.28282
G01 X46.61515 Y21.31071
G01 X46.64979 Y21.32506
G01 X46.73450 Y21.37032
G01 X46.77715 Y21.40532
G01 X46.80877 Y21.43126
G01 X46.86971 Y21.50553
G01 X46.91497 Y21.59024
G01 X46.92932 Y21.62488
G01 X46.95721 Y21.71681
G01 X46.96663 Y21.81239
G01 X46.96663 Y23.94240
G01 X46.99754 Y24.04428
G01 X47.01626 Y24.13849
G01 X47.05662 Y24.54819
G01 X47.05662 Y24.64423
G01 X47.01626 Y25.05393
G01 X46.99754 Y25.14814
G01 X46.96663 Y25.25002
G01 X46.96663 Y26.80887
G01 X46.95721 Y26.90448
G01 X46.92932 Y26.99640
G01 X46.91497 Y27.03104
G01 X46.86971 Y27.11575
G01 X46.80877 Y27.19002
G01 X46.73450 Y27.25096
G01 X46.64979 Y27.29622
G01 X46.61515 Y27.31057
G01 X46.52322 Y27.33846
G01 X46.42764 Y27.34788
G01 X1.40663 Y27.34788
G01 X1.31102 Y27.33846
G01 X1.21910 Y27.31057
G01 X1.18445 Y27.29622
G01 X1.09974 Y27.25096
G01 X1.02547 Y27.19002
G01 X0.96454 Y27.11575
G01 X0.91928 Y27.03104
G01 X0.90493 Y26.99640
G01 X0.87704 Y26.90448
G01 X0.86761 Y26.80887
G01 X0.86761 Y25.39597
G01 X0.79243 Y25.14814
G01 X0.77371 Y25.05393
G01 X0.73335 Y24.64423
G01 X0.73335 Y24.54819
G01 X0.77371 Y24.13849
G01 X0.79243 Y24.04428
G01 X0.86761 Y23.79646
G01 X0.86761 Y18.25801
G01 X0.87704 Y18.16243
G01 X0.90493 Y18.07051
G01 X0.91928 Y18.03586
G01 X0.96451 Y17.95120
G01 X1.02537 Y17.87701
G01 X1.09954 Y17.81608
G01 X1.18417 Y17.77079
G01 X1.21882 Y17.75641
G01 X1.31087 Y17.72845
G01 X1.40663 Y17.71900
G01 X2.05468 Y17.71900
G01 X2.05631 Y17.72019
G01 X2.10157 Y17.75120
G01 X2.11115 Y17.75745
G01 X2.19352 Y17.80569
G01 X2.20312 Y17.81069
G01 X2.27602 Y17.84440
G01 X2.28559 Y17.84826
G01 X2.35255 Y17.87173
G01 X2.36215 Y17.87457
G01 X2.42441 Y17.88986
G01 X2.43401 Y17.89174
G01 X2.49451 Y17.90056
G01 X2.50411 Y17.90147
G01 X2.56271 Y17.90429
G01 X2.57228 Y17.90429
G01 X2.63086 Y17.90147
G01 X2.64046 Y17.90056
G01 X2.70096 Y17.89174
G01 X2.71056 Y17.88986
G01 X2.77282 Y17.87457
G01 X2.78242 Y17.87173
G01 X2.84937 Y17.84826
G01 X2.85895 Y17.84440
G01 X2.93185 Y17.81069
G01 X2.94145 Y17.80569
G01 X3.02382 Y17.75745
G01 X3.03340 Y17.75120
G01 X3.07866 Y17.72019
G01 X3.08028 Y17.71900
G01 X3.55595 Y16.29200
G01 X3.72933 Y15.77196
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.75163 Y15.45634 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.75163 Y15.45634
G01 X3.75183 Y15.40455
G01 X3.75181 Y15.40452
G01 X3.75186 Y15.39787
G01 X3.75186 Y15.39635
G01 X3.75425 Y15.38842
G01 X3.79100 Y15.29967
G01 X3.79562 Y15.29104
G01 X3.84899 Y15.21118
G01 X3.85521 Y15.20358
G01 X3.92313 Y15.13567
G01 X3.93073 Y15.12944
G01 X4.01058 Y15.07608
G01 X4.01922 Y15.07145
G01 X4.10797 Y15.03470
G01 X4.11734 Y15.03186
G01 X4.17157 Y15.02109
G01 X4.21157 Y15.01311
G01 X4.22133 Y15.01217
G01 X4.31737 Y15.01217
G01 X4.32712 Y15.01311
G01 X4.42135 Y15.03186
G01 X4.43073 Y15.03470
G01 X4.45821 Y15.04608
G01 X4.45844 Y15.04654
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.81464 Y8.13901 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.81464 Y8.13901
G01 X7.72554 Y8.09133
G01 X7.64568 Y8.03797
G01 X7.52445 Y7.93847
G01 X7.45653 Y7.87055
G01 X7.35703 Y7.74932
G01 X7.30367 Y7.66946
G01 X7.22973 Y7.53113
G01 X7.19298 Y7.44241
G01 X7.14746 Y7.29232
G01 X7.13097 Y7.20944
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.24447 Y4.00300 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.24447 Y4.00300
G01 X3.31757 Y3.92990
G01 X3.34432 Y3.90094
G01 X3.34952 Y3.89482
G01 X3.39557 Y3.83094
G01 X3.39971 Y3.82405
G01 X3.41874 Y3.78954
G01 X3.51396 Y3.59906
G01 X3.52613 Y3.57105
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X3.52610 Y2.09652 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X3.52610 Y2.09652
G01 X3.52616 Y1.83379
G01 X3.52852 Y1.78578
G01 X3.52946 Y1.77603
G01 X3.54820 Y1.68179
G01 X3.55105 Y1.67242
G01 X3.58780 Y1.58367
G01 X3.59242 Y1.57504
G01 X3.64579 Y1.49518
G01 X3.65201 Y1.48758
G01 X3.71993 Y1.41967
G01 X3.72753 Y1.41344
G01 X3.80738 Y1.36008
G01 X3.81602 Y1.35545
G01 X3.90477 Y1.31870
G01 X3.91414 Y1.31586
G01 X3.93792 Y1.31113
G01 X4.00837 Y1.29711
G01 X4.01813 Y1.29617
G01 X4.11417 Y1.29617
G01 X4.12392 Y1.29711
G01 X4.21815 Y1.31586
G01 X4.22753 Y1.31870
G01 X4.23522 Y1.32190
G01 X4.23662 Y1.32403
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X2.52334 Y2.50595 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X2.52334 Y2.50595
G01 X2.58623 Y2.75741
G01 X2.58623 Y2.91016
G01 X2.52334 Y3.16162
G01 X2.52334 Y2.50595
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X1.47147 Y4.00300 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X1.47147 Y4.00300
G01 X1.37450 Y4.00300
G01 X1.27874 Y4.01245
G01 X1.18669 Y4.04041
G01 X1.15204 Y4.05479
G01 X1.14892 Y4.05646
G01 X1.06741 Y4.10008
G01 X0.99324 Y4.16101
G01 X0.93238 Y4.23520
G01 X0.88715 Y4.31986
G01 X0.87280 Y4.35451
G01 X0.84491 Y4.44643
G01 X0.83548 Y4.54201
G01 X0.83548 Y10.82671
G01 X0.83495 Y10.83219
G01 X0.83495 Y10.92823
G01 X0.83548 Y10.93372
G01 X0.83548 Y12.99452
G01 X0.84491 Y13.09013
G01 X0.87280 Y13.18205
G01 X0.88715 Y13.21670
G01 X0.93241 Y13.30140
G01 X0.99334 Y13.37567
G01 X1.06761 Y13.43661
G01 X1.15232 Y13.48187
G01 X1.18697 Y13.49622
G01 X1.27889 Y13.52411
G01 X1.37450 Y13.53353
G01 X46.52249 Y13.53353
G01 X46.61807 Y13.52411
G01 X46.70999 Y13.49622
G01 X46.74464 Y13.48187
G01 X46.82935 Y13.43661
G01 X46.90362 Y13.37567
G01 X46.96455 Y13.30140
G01 X47.00981 Y13.21670
G01 X47.02416 Y13.18205
G01 X47.05205 Y13.09013
G01 X47.06148 Y12.99452
G01 X47.06148 Y1.37450
G01 X47.05205 Y1.27892
G01 X47.02416 Y1.18700
G01 X47.00981 Y1.15236
G01 X46.96455 Y1.06765
G01 X46.90362 Y0.99338
G01 X46.82935 Y0.93244
G01 X46.74464 Y0.88718
G01 X46.70999 Y0.87283
G01 X46.61807 Y0.84494
G01 X46.52249 Y0.83552
G01 X4.77065 Y0.83552
G01 X4.67505 Y0.84494
G01 X4.58313 Y0.87283
G01 X4.54848 Y0.88718
G01 X4.46377 Y0.93244
G01 X4.38950 Y0.99338
G01 X4.36357 Y1.02500
G01 X4.32857 Y1.06765
G01 X4.28330 Y1.15236
G01 X4.26895 Y1.18700
G01 X4.24106 Y1.27892
G01 X4.23662 Y1.32406
G01 X4.26939 Y1.37450
G01 X4.28930 Y1.40646
G01 X4.29517 Y1.41626
G01 X4.33774 Y1.49569
G01 X4.34236 Y1.50549
G01 X4.37175 Y1.57626
G01 X4.37525 Y1.58606
G01 X4.39537 Y1.65205
G01 X4.39781 Y1.66185
G01 X4.41028 Y1.72424
G01 X4.41173 Y1.73404
G01 X4.41767 Y1.79411
G01 X4.41815 Y1.80392
G01 X4.41889 Y1.83381
G01 X4.41889 Y3.83378
G01 X4.41815 Y3.86360
G01 X4.41767 Y3.87343
G01 X4.41173 Y3.93358
G01 X4.41028 Y3.94338
G01 X4.39781 Y4.00577
G01 X4.39537 Y4.01557
G01 X4.37525 Y4.08156
G01 X4.37175 Y4.09136
G01 X4.35836 Y4.12601
G01 X4.32366 Y4.13942
G01 X4.31389 Y4.14293
G01 X4.24790 Y4.16302
G01 X4.23809 Y4.16548
G01 X4.17571 Y4.17793
G01 X4.16591 Y4.17940
G01 X4.10583 Y4.18532
G01 X4.09603 Y4.18580
G01 X4.03634 Y4.18583
G01 X4.02651 Y4.18534
G01 X3.96636 Y4.17940
G01 X3.95656 Y4.17793
G01 X3.89418 Y4.16548
G01 X3.88437 Y4.16302
G01 X3.81838 Y4.14293
G01 X3.80911 Y4.13960
G01 X3.80860 Y4.13942
G01 X3.75671 Y4.12088
G01 X3.73606 Y4.11146
G01 X3.72626 Y4.10683
G01 X3.64637 Y4.06403
G01 X3.63657 Y4.05817
G01 X3.55427 Y4.00300
G01 X3.55105 Y3.99517
G01 X3.54820 Y3.98580
G01 X3.52946 Y3.89157
G01 X3.52852 Y3.88181
G01 X3.52616 Y3.83378
G01 X3.52613 Y3.57105
G01 X3.53085 Y3.54826
G01 X3.53281 Y3.53734
G01 X3.54068 Y3.48507
G01 X3.58905 Y3.09238
G01 X3.59382 Y3.04052
G01 X3.59458 Y3.02830
G01 X3.59618 Y2.97666
G01 X3.59618 Y2.69091
G01 X3.59458 Y2.63917
G01 X3.59382 Y2.62698
G01 X3.58905 Y2.57521
G01 X3.54068 Y2.18253
G01 X3.53281 Y2.13026
G01 X3.53085 Y2.11933
G01 X3.52610 Y2.09652
G01 X3.51396 Y2.06851
G01 X3.41874 Y1.87803
G01 X3.39971 Y1.84352
G01 X3.39557 Y1.83663
G01 X3.34952 Y1.77275
G01 X3.34432 Y1.76663
G01 X3.31757 Y1.73767
G01 X3.15247 Y1.57255
G01 X3.12710 Y1.54720
G01 X3.08470 Y1.50943
G01 X3.07564 Y1.50227
G01 X2.97922 Y1.44268
G01 X2.96873 Y1.43778
G01 X2.91600 Y1.41672
G01 X2.63027 Y1.32149
G01 X2.59243 Y1.31055
G01 X2.58463 Y1.30864
G01 X2.50693 Y1.29602
G01 X2.49890 Y1.29538
G01 X2.45956 Y1.29381
G01 X1.98336 Y1.29381
G01 X1.93533 Y1.29617
G01 X1.92557 Y1.29711
G01 X1.83134 Y1.31586
G01 X1.82197 Y1.31870
G01 X1.73322 Y1.35545
G01 X1.72458 Y1.36008
G01 X1.64473 Y1.41344
G01 X1.63713 Y1.41967
G01 X1.56921 Y1.48758
G01 X1.56299 Y1.49518
G01 X1.50962 Y1.57504
G01 X1.50500 Y1.58367
G01 X1.46825 Y1.67242
G01 X1.46540 Y1.68179
G01 X1.44666 Y1.77603
G01 X1.44572 Y1.78578
G01 X1.44336 Y1.83379
G01 X1.44336 Y3.83378
G01 X1.44572 Y3.88181
G01 X1.44666 Y3.89157
G01 X1.46540 Y3.98580
G01 X1.46825 Y3.99517
G01 X1.47147 Y4.00300
G01 X1.55377 Y4.05817
G01 X1.56357 Y4.06403
G01 X1.64346 Y4.10683
G01 X1.65326 Y4.11146
G01 X1.72446 Y4.14102
G01 X1.73426 Y4.14455
G01 X1.80066 Y4.16477
G01 X1.81044 Y4.16721
G01 X1.87323 Y4.17976
G01 X1.88300 Y4.18120
G01 X1.94353 Y4.18717
G01 X1.95336 Y4.18766
G01 X1.98336 Y4.18842
G01 X2.45956 Y4.18842
G01 X2.48369 Y4.18793
G01 X2.49172 Y4.18760
G01 X2.54191 Y4.18357
G01 X2.54993 Y4.18258
G01 X2.57462 Y4.17907
G01 X2.87581 Y4.13018
G01 X2.91846 Y4.12197
G01 X2.93002 Y4.11941
G01 X3.01948 Y4.09388
G01 X3.03106 Y4.08984
G01 X3.07846 Y4.07176
G01 X3.24447 Y4.00300
G01 X3.55427 Y4.00300
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X7.13097 Y6.82037 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X7.13097 Y6.82037
G01 X7.10113 Y6.79304
G01 X7.02656 Y6.72242
G01 X6.93049 Y6.61437
G01 X6.91446 Y6.59253
G01 X6.90692 Y6.58242
G01 X6.87522 Y6.54081
G01 X6.83499 Y6.48117
G01 X6.79150 Y6.40777
G01 X6.76430 Y6.36591
G01 X6.75897 Y6.35852
G01 X6.72935 Y6.31816
G01 X6.65922 Y6.23749
G01 X6.61828 Y6.19484
G01 X6.60672 Y6.18392
G01 X6.49661 Y6.09591
G01 X6.46374 Y6.07142
G01 X6.44777 Y6.06251
G01 X6.30967 Y5.98824
G01 X6.30357 Y5.98501
G01 X6.25452 Y5.96677
G01 X6.13121 Y5.92692
G01 X6.10461 Y5.92070
G01 X6.04657 Y5.91008
G01 X5.95183 Y5.89751
G01 X5.89054 Y5.89451
G01 X5.83146 Y5.89451
G01 X5.77012 Y5.89751
G01 X5.67538 Y5.91008
G01 X5.61734 Y5.92070
G01 X5.59074 Y5.92692
G01 X5.46743 Y5.96677
G01 X5.41838 Y5.98501
G01 X5.41228 Y5.98824
G01 X5.27418 Y6.06251
G01 X5.25821 Y6.07142
G01 X5.22534 Y6.09591
G01 X5.11523 Y6.18392
G01 X5.10367 Y6.19484
G01 X5.08953 Y6.20866
G01 X5.06273 Y6.23749
G01 X4.99260 Y6.31816
G01 X4.96298 Y6.35852
G01 X4.93045 Y6.40777
G01 X4.89336 Y6.47038
G01 X4.85658 Y6.54610
G01 X4.83344 Y6.60040
G01 X4.82003 Y6.63667
G01 X4.78836 Y6.75062
G01 X4.77533 Y6.80828
G01 X4.77454 Y6.81272
G01 X4.76080 Y6.96441
G01 X4.75884 Y6.99403
G01 X4.76080 Y7.02362
G01 X4.77454 Y7.17533
G01 X4.77533 Y7.17978
G01 X4.78836 Y7.23743
G01 X4.82003 Y7.35138
G01 X4.83344 Y7.38765
G01 X4.85658 Y7.44195
G01 X4.89336 Y7.51767
G01 X4.93045 Y7.58028
G01 X4.96298 Y7.62953
G01 X4.99260 Y7.66989
G01 X5.06273 Y7.75056
G01 X5.10367 Y7.79321
G01 X5.11523 Y7.80413
G01 X5.22534 Y7.89214
G01 X5.25818 Y7.91663
G01 X5.27418 Y7.92554
G01 X5.41228 Y7.99981
G01 X5.42161 Y8.00472
G01 X5.44584 Y8.01721
G01 X5.45846 Y8.02783
G01 X5.46918 Y8.03710
G01 X5.50126 Y8.06690
G01 X6.59044 Y9.15607
G01 X6.66648 Y9.24894
G01 X6.67713 Y9.26486
G01 X6.68084 Y9.28358
G01 X6.69272 Y9.40301
G01 X6.69272 Y9.57322
G01 X6.78647 Y9.79953
G01 X6.79412 Y9.81939
G01 X6.81868 Y9.88800
G01 X6.82877 Y9.92120
G01 X6.84596 Y9.98980
G01 X6.85160 Y10.01805
G01 X6.86176 Y10.08665
G01 X6.86427 Y10.11210
G01 X6.86765 Y10.18071
G01 X6.86796 Y10.19303
G01 X6.86796 Y10.42902
G01 X6.99298 Y10.67906
G01 X7.04319 Y10.72927
G01 X8.79300 Y10.72927
G01 X8.81266 Y10.72894
G01 X8.87103 Y10.72028
G01 X8.94375 Y10.69018
G01 X9.00621 Y10.64223
G01 X9.05414 Y10.57979
G01 X9.08423 Y10.50710
G01 X9.09290 Y10.44870
G01 X9.09323 Y10.42902
G01 X9.09323 Y8.62902
G01 X9.09290 Y8.60934
G01 X9.08423 Y8.55097
G01 X9.05414 Y8.47827
G01 X8.98642 Y8.39433
G01 X8.87867 Y8.28892
G01 X8.84634 Y8.25889
G01 X8.79300 Y8.21183
G01 X8.76138 Y8.18290
G01 X8.68317 Y8.19448
G01 X8.59889 Y8.20281
G01 X8.44207 Y8.21053
G01 X8.35990 Y8.21053
G01 X8.20308 Y8.20281
G01 X8.11878 Y8.19448
G01 X7.96196 Y8.17124
G01 X7.87042 Y8.15298
G01 X7.81464 Y8.13901
G01 X7.68091 Y8.13901
G01 X7.04418 Y7.50230
G01 X7.06900 Y7.44241
G01 X7.11452 Y7.29232
G01 X7.13097 Y7.20944
G01 X7.13097 Y6.82037
G01 X7.15970 Y6.79291
G01 X7.19955 Y6.75361
G01 X7.23196 Y6.72303
G01 X7.23334 Y6.72179
G01 X7.34941 Y6.59311
G01 X7.37967 Y6.55064
G01 X7.38678 Y6.54086
G01 X7.39171 Y6.53423
G01 X7.42701 Y6.48112
G01 X7.47045 Y6.40777
G01 X7.50298 Y6.35852
G01 X7.53262 Y6.31816
G01 X7.60273 Y6.23749
G01 X7.63717 Y6.20106
G01 X7.64362 Y6.19479
G01 X7.70997 Y6.11872
G01 X7.71121 Y6.11232
G01 X7.71792 Y6.07668
G01 X7.72856 Y5.96365
G01 X7.72856 Y5.67516
G01 X7.72930 Y5.64564
G01 X7.73097 Y5.61138
G01 X7.73603 Y5.57737
G01 X7.74047 Y5.55123
G01 X7.74751 Y5.51953
G01 X7.75587 Y5.48621
G01 X7.76742 Y5.45387
G01 X7.79000 Y5.39939
G01 X7.80468 Y5.36832
G01 X7.82234 Y5.33889
G01 X7.82831 Y5.32913
G01 X7.85515 Y5.28976
G01 X7.87560 Y5.26220
G01 X7.89869 Y5.23673
G01 X7.91901 Y5.21539
G01 X9.05203 Y4.08240
G01 X9.07336 Y4.06208
G01 X9.09884 Y4.03896
G01 X9.12640 Y4.01854
G01 X9.17550 Y3.98573
G01 X9.20496 Y3.96807
G01 X9.23600 Y3.95339
G01 X9.27791 Y3.93548
G01 X9.29051 Y3.93081
G01 X9.32284 Y3.91925
G01 X9.35617 Y3.91090
G01 X9.36775 Y3.90813
G01 X9.41400 Y3.89939
G01 X9.44801 Y3.89434
G01 X9.48230 Y3.89266
G01 X9.51184 Y3.89195
G01 X13.10450 Y3.89195
G01 X13.12360 Y3.89705
G01 X13.29022 Y3.93879
G01 X13.33896 Y3.94851
G01 X13.50561 Y3.97323
G01 X13.54811 Y3.97742
G01 X13.71473 Y3.98560
G01 X13.75524 Y3.98560
G01 X13.92184 Y3.97742
G01 X13.96434 Y3.97323
G01 X14.13099 Y3.94851
G01 X14.17973 Y3.93879
G01 X14.34635 Y3.89705
G01 X14.36545 Y3.89195
G01 X14.90627 Y3.89195
G01 X15.02565 Y3.88006
G01 X15.06317 Y3.87262
G01 X15.24158 Y3.81128
G01 X15.30538 Y3.72830
G01 X15.31287 Y3.71707
G01 X15.30873 Y3.68908
G01 X15.29672 Y3.62499
G01 X15.28087 Y3.55588
G01 X15.25824 Y3.47897
G01 X15.25128 Y3.45987
G01 X15.22682 Y3.40208
G01 X15.22441 Y3.39713
G01 X15.20124 Y3.34278
G01 X15.18676 Y3.30361
G01 X15.15329 Y3.18321
G01 X15.14025 Y3.12550
G01 X15.13921 Y3.11956
G01 X15.12471 Y2.95959
G01 X15.12275 Y2.93003
G01 X15.12471 Y2.90043
G01 X15.13921 Y2.74052
G01 X15.14025 Y2.73455
G01 X15.15329 Y2.67684
G01 X15.18676 Y2.55644
G01 X15.20124 Y2.51728
G01 X15.22441 Y2.46292
G01 X15.26342 Y2.38260
G01 X15.30292 Y2.31595
G01 X15.33540 Y2.26678
G01 X15.36718 Y2.22347
G01 X15.44132 Y2.13816
G01 X15.48232 Y2.09543
G01 X15.49537 Y2.08311
G01 X15.58003 Y2.01545
G01 X15.61158 Y1.99025
G01 X15.64483 Y1.96551
G01 X15.66032 Y1.95688
G01 X15.80706 Y1.87793
G01 X15.81226 Y1.87519
G01 X15.86228 Y1.85652
G01 X15.99248 Y1.81446
G01 X16.02158 Y1.80762
G01 X16.07967 Y1.79701
G01 X16.18000 Y1.78372
G01 X16.24549 Y1.78050
G01 X16.30449 Y1.78050
G01 X16.36995 Y1.78372
G01 X16.47028 Y1.79701
G01 X16.52836 Y1.80762
G01 X16.55747 Y1.81446
G01 X16.68767 Y1.85652
G01 X16.73769 Y1.87516
G01 X16.74289 Y1.87796
G01 X16.88963 Y1.95688
G01 X16.90515 Y1.96551
G01 X16.93837 Y1.99025
G01 X17.05460 Y2.08311
G01 X17.06763 Y2.09543
G01 X17.10863 Y2.13816
G01 X17.18277 Y2.22347
G01 X17.21455 Y2.26678
G01 X17.24703 Y2.31595
G01 X17.25176 Y2.32393
G01 X17.32415 Y2.42228
G01 X17.34993 Y2.45101
G01 X17.39626 Y2.50285
G01 X17.54177 Y2.63285
G01 X17.54497 Y2.63518
G01 X17.54497 Y3.34539
G01 X17.52918 Y3.39754
G01 X17.49242 Y3.48629
G01 X17.41389 Y3.63322
G01 X17.36052 Y3.71311
G01 X17.25480 Y3.84191
G01 X17.18689 Y3.90983
G01 X17.06359 Y4.01100
G01 X17.05501 Y4.05420
G01 X17.03509 Y4.11986
G01 X16.99834 Y4.20861
G01 X16.96598 Y4.26911
G01 X16.95671 Y4.28301
G01 X16.91262 Y4.34897
G01 X16.86911 Y4.40201
G01 X16.83680 Y4.43764
G01 X16.55625 Y4.71819
G01 X15.96515 Y4.96302
G01 X15.94157 Y4.97213
G01 X15.87297 Y4.99670
G01 X15.83268 Y5.00894
G01 X15.76408 Y5.02611
G01 X15.72908 Y5.03309
G01 X15.66047 Y5.04328
G01 X15.62847 Y5.04643
G01 X15.55986 Y5.04981
G01 X15.54434 Y5.05019
G01 X14.87251 Y5.05019
G01 X14.85699 Y5.05057
G01 X14.78836 Y5.05395
G01 X14.75636 Y5.05710
G01 X14.68775 Y5.06728
G01 X14.65275 Y5.07427
G01 X14.58415 Y5.09144
G01 X14.54386 Y5.10368
G01 X14.47526 Y5.12824
G01 X14.45169 Y5.13736
G01 X13.86055 Y5.38219
G01 X9.85977 Y5.38217
G01 X9.23077 Y6.01117
G01 X9.27753 Y6.04955
G01 X9.34545 Y6.11747
G01 X9.42597 Y6.21559
G01 X9.44494 Y6.23871
G01 X9.49831 Y6.31856
G01 X9.57224 Y6.45689
G01 X9.60900 Y6.54561
G01 X9.65452 Y6.69570
G01 X9.67097 Y6.77843
G01 X9.67097 Y7.16769
G01 X9.64225 Y7.19512
G01 X9.60239 Y7.23444
G01 X9.56998 Y7.26502
G01 X9.56861 Y7.26626
G01 X9.45253 Y7.39494
G01 X9.42211 Y7.43764
G01 X9.41517 Y7.44721
G01 X9.41009 Y7.45404
G01 X9.37496 Y7.50690
G01 X9.33150 Y7.58028
G01 X9.29897 Y7.62953
G01 X9.26935 Y7.66989
G01 X9.19922 Y7.75056
G01 X9.15828 Y7.79321
G01 X9.14672 Y7.80413
G01 X9.03661 Y7.89217
G01 X8.99013 Y7.92994
G01 X8.94664 Y7.96865
G01 X8.91870 Y7.99590
G01 X8.87344 Y8.04432
G01 X8.82038 Y8.10649
G01 X8.76138 Y8.18290
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X9.67097 Y7.16769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X9.67097 Y7.16769
G01 X9.70079 Y7.19502
G01 X9.77539 Y7.26563
G01 X9.87138 Y7.37358
G01 X9.88748 Y7.39552
G01 X9.89498 Y7.40553
G01 X9.92675 Y7.44721
G01 X9.96701 Y7.50693
G01 X10.01045 Y7.58028
G01 X10.04298 Y7.62953
G01 X10.07262 Y7.66992
G01 X10.14273 Y7.75056
G01 X10.17720 Y7.78704
G01 X10.18362 Y7.79326
G01 X10.24997 Y7.86933
G01 X10.25121 Y7.87568
G01 X10.25792 Y7.91130
G01 X10.26772 Y7.99288
G01 X10.26937 Y8.02438
G01 X10.27097 Y8.05666
G01 X10.27603 Y8.09070
G01 X10.28479 Y8.13708
G01 X10.28753 Y8.14851
G01 X10.29587 Y8.18188
G01 X10.30742 Y8.21419
G01 X10.33000 Y8.26867
G01 X10.34471 Y8.29976
G01 X10.36234 Y8.32918
G01 X10.39515 Y8.37830
G01 X10.41560 Y8.40586
G01 X10.43869 Y8.43134
G01 X10.45901 Y8.45267
G01 X11.16241 Y9.15607
G01 X11.23848 Y9.24894
G01 X11.24913 Y9.26486
G01 X11.25284 Y9.28358
G01 X11.26472 Y9.40301
G01 X11.26472 Y10.42902
G01 X11.26505 Y10.44870
G01 X11.27371 Y10.50707
G01 X11.30381 Y10.57979
G01 X11.35174 Y10.64225
G01 X11.41420 Y10.69018
G01 X11.48695 Y10.72031
G01 X11.54516 Y10.72894
G01 X11.56498 Y10.72927
G01 X13.36500 Y10.72927
G01 X13.38466 Y10.72894
G01 X13.44303 Y10.72028
G01 X13.51575 Y10.69018
G01 X13.57821 Y10.64223
G01 X13.62614 Y10.57979
G01 X13.65623 Y10.50710
G01 X13.66490 Y10.44870
G01 X13.66523 Y10.42902
G01 X13.66523 Y8.62902
G01 X13.66490 Y8.60934
G01 X13.65623 Y8.55097
G01 X13.63480 Y8.49661
G01 X13.62908 Y8.48401
G01 X13.57130 Y8.35780
G01 X13.55225 Y8.31904
G01 X13.50162 Y8.22247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X14.75097 Y7.16769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X14.75097 Y7.16769
G01 X14.78079 Y7.19502
G01 X14.85539 Y7.26563
G01 X14.95138 Y7.37358
G01 X14.96748 Y7.39552
G01 X14.97498 Y7.40553
G01 X15.00675 Y7.44721
G01 X15.04701 Y7.50693
G01 X15.09045 Y7.58028
G01 X15.12298 Y7.62953
G01 X15.15262 Y7.66992
G01 X15.22273 Y7.75056
G01 X15.25720 Y7.78704
G01 X15.26362 Y7.79326
G01 X15.32997 Y7.86933
G01 X15.33121 Y7.87568
G01 X15.33792 Y7.91130
G01 X15.34856 Y8.02438
G01 X15.34856 Y8.50088
G01 X15.34930 Y8.53040
G01 X15.35097 Y8.56466
G01 X15.35603 Y8.59870
G01 X15.36753 Y8.65651
G01 X15.37147 Y8.67225
G01 X15.37589 Y8.68988
G01 X15.38745 Y8.72217
G01 X15.39387 Y8.73936
G01 X15.41000 Y8.77667
G01 X15.42471 Y8.80776
G01 X15.44234 Y8.83718
G01 X15.47515 Y8.88630
G01 X15.49560 Y8.91386
G01 X15.51869 Y8.93934
G01 X15.53901 Y8.96067
G01 X15.73441 Y9.15607
G01 X15.81048 Y9.24894
G01 X15.82113 Y9.26486
G01 X15.82484 Y9.28358
G01 X15.83672 Y9.40301
G01 X15.83672 Y10.42902
G01 X15.83705 Y10.44870
G01 X15.84571 Y10.50707
G01 X15.87581 Y10.57979
G01 X15.92374 Y10.64225
G01 X15.98620 Y10.69018
G01 X16.05895 Y10.72031
G01 X16.11716 Y10.72894
G01 X16.13698 Y10.72927
G01 X17.93697 Y10.72927
G01 X17.95666 Y10.72894
G01 X18.01503 Y10.72028
G01 X18.08775 Y10.69018
G01 X18.15021 Y10.64223
G01 X18.19814 Y10.57979
G01 X18.22823 Y10.50710
G01 X18.23690 Y10.44870
G01 X18.23723 Y10.42902
G01 X18.23723 Y8.62902
G01 X18.23690 Y8.60934
G01 X18.22641 Y8.54205
G01 X18.22049 Y8.52145
G01 X18.21487 Y8.50304
G01 X18.14685 Y8.29138
G01 X18.13039 Y8.24396
G01 X18.10868 Y8.18562
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X18.02823 Y8.15709 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X18.02823 Y8.15709
G01 X17.98310 Y8.14348
G01 X17.88554 Y8.09133
G01 X17.80568 Y8.03797
G01 X17.68445 Y7.93847
G01 X17.61653 Y7.87055
G01 X17.51703 Y7.74932
G01 X17.46367 Y7.66946
G01 X17.38973 Y7.53113
G01 X17.35298 Y7.44241
G01 X17.30746 Y7.29232
G01 X17.29097 Y7.20944
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.29097 Y6.77843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.29097 Y6.77843
G01 X17.30746 Y6.69570
G01 X17.35298 Y6.54561
G01 X17.38973 Y6.45689
G01 X17.42112 Y6.39817
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.16082 Y6.39817 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.16082 Y6.39817
G01 X17.42112 Y6.39817
G01 X17.51134 Y6.34409
G01 X17.57634 Y6.30843
G01 X17.59227 Y6.30048
G01 X17.61391 Y6.28933
G01 X17.67939 Y6.25433
G01 X17.73951 Y6.21844
G01 X17.74053 Y6.21775
G01 X17.79547 Y6.18486
G01 X17.80131 Y6.18173
G01 X17.85386 Y6.15024
G01 X17.91119 Y6.11196
G01 X17.92859 Y6.09987
G01 X17.95872 Y6.07815
G01 X17.97401 Y6.06751
G01 X17.98942 Y6.04869
G01 X18.00675 Y6.02852
G01 X18.02564 Y6.00751
G01 X18.02724 Y6.00571
G01 X18.07340 Y5.95484
G01 X18.09242 Y5.93482
G01 X19.22920 Y4.79807
G01 X19.24822 Y4.77805
G01 X19.29437 Y4.72715
G01 X19.33039 Y4.68323
G01 X19.37169 Y4.62753
G01 X19.40578 Y4.57650
G01 X19.44213 Y4.51582
G01 X19.47494 Y4.45436
G01 X19.50611 Y4.38847
G01 X19.52239 Y4.35169
G01 X19.62282 Y4.10920
G01 X19.62282 Y3.99523
G01 X19.72689 Y3.90983
G01 X19.79480 Y3.84191
G01 X19.90052 Y3.71311
G01 X19.95389 Y3.63322
G01 X20.03242 Y3.48629
G01 X20.06918 Y3.39754
G01 X20.08497 Y3.34539
G01 X20.08497 Y2.63518
G01 X20.08807 Y2.63282
G01 X20.15038 Y2.58128
G01 X20.18302 Y2.55200
G01 X20.23354 Y2.50280
G01 X20.28228 Y2.45108
G01 X20.33135 Y2.39251
G01 X20.34344 Y2.37620
G01 X20.37819 Y2.32393
G01 X20.38292 Y2.31595
G01 X20.41540 Y2.26678
G01 X20.44718 Y2.22347
G01 X20.52132 Y2.13816
G01 X20.56232 Y2.09543
G01 X20.57537 Y2.08311
G01 X20.66003 Y2.01545
G01 X20.69158 Y1.99025
G01 X20.72483 Y1.96551
G01 X20.74032 Y1.95688
G01 X20.88706 Y1.87793
G01 X20.89226 Y1.87519
G01 X20.94228 Y1.85652
G01 X21.07248 Y1.81446
G01 X21.10158 Y1.80762
G01 X21.15967 Y1.79701
G01 X21.26000 Y1.78372
G01 X21.32549 Y1.78050
G01 X21.38449 Y1.78050
G01 X21.44995 Y1.78372
G01 X21.55028 Y1.79701
G01 X21.60836 Y1.80762
G01 X21.63747 Y1.81446
G01 X21.76767 Y1.85652
G01 X21.81769 Y1.87516
G01 X21.82289 Y1.87796
G01 X21.96963 Y1.95688
G01 X21.98515 Y1.96551
G01 X22.01837 Y1.99025
G01 X22.13460 Y2.08311
G01 X22.14763 Y2.09543
G01 X22.18863 Y2.13816
G01 X22.26277 Y2.22347
G01 X22.29455 Y2.26678
G01 X22.32703 Y2.31595
G01 X22.33176 Y2.32393
G01 X22.40415 Y2.42228
G01 X22.42993 Y2.45101
G01 X22.47626 Y2.50285
G01 X22.62177 Y2.63285
G01 X22.62497 Y2.63518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.62497 Y3.34539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.62497 Y3.34539
G01 X22.64080 Y3.39754
G01 X22.67755 Y3.48629
G01 X22.75609 Y3.63322
G01 X22.80945 Y3.71311
G01 X22.89584 Y3.81834
G01 X22.89584 Y5.70401
G01 X22.84098 Y5.70401
G01 X22.74540 Y5.71343
G01 X22.65347 Y5.74132
G01 X22.56876 Y5.78659
G01 X22.49449 Y5.84752
G01 X22.43356 Y5.92179
G01 X22.38830 Y6.00650
G01 X22.36041 Y6.09842
G01 X22.35098 Y6.19400
G01 X22.35098 Y6.68422
G01 X22.35276 Y6.69629
G01 X22.36211 Y6.79095
G01 X22.36983 Y6.94777
G01 X22.36983 Y7.04025
G01 X22.36211 Y7.19710
G01 X22.35276 Y7.29176
G01 X22.35098 Y7.30383
G01 X22.35098 Y7.79402
G01 X22.36041 Y7.88960
G01 X22.38830 Y7.98153
G01 X22.43356 Y8.06624
G01 X22.48444 Y8.12821
G01 X22.50900 Y8.14264
G01 X22.69764 Y8.21810
G01 X22.84098 Y8.15712
G01 X22.98030 Y8.11361
G01 X23.01779 Y8.10616
G01 X23.13724 Y8.09428
G01 X24.44097 Y8.09428
G01 X24.46071 Y8.09395
G01 X24.46853 Y8.09313
G01 X24.51900 Y8.08531
G01 X24.53602 Y8.07924
G01 X24.65108 Y8.03631
G01 X24.68860 Y8.02105
G01 X24.91130 Y7.92311
G01 X24.92157 Y7.88960
G01 X24.93099 Y7.79402
G01 X24.93099 Y6.19400
G01 X24.92157 Y6.09842
G01 X24.89368 Y6.00650
G01 X24.84841 Y5.92179
G01 X24.78748 Y5.84752
G01 X24.71321 Y5.78659
G01 X24.62850 Y5.74132
G01 X24.57582 Y5.72535
G01 X24.57582 Y4.08087
G01 X24.59820 Y4.06891
G01 X24.67808 Y4.01555
G01 X24.80689 Y3.90983
G01 X24.87480 Y3.84191
G01 X24.98052 Y3.71311
G01 X25.03389 Y3.63322
G01 X25.11242 Y3.48629
G01 X25.14918 Y3.39754
G01 X25.16497 Y3.34539
G01 X25.16497 Y2.63518
G01 X25.16177 Y2.63285
G01 X25.01626 Y2.50285
G01 X24.96993 Y2.45101
G01 X24.94415 Y2.42228
G01 X24.87176 Y2.32393
G01 X24.86703 Y2.31595
G01 X24.83455 Y2.26678
G01 X24.80277 Y2.22347
G01 X24.72863 Y2.13816
G01 X24.68763 Y2.09543
G01 X24.67460 Y2.08311
G01 X24.55837 Y1.99025
G01 X24.52515 Y1.96551
G01 X24.50963 Y1.95688
G01 X24.36289 Y1.87796
G01 X24.35769 Y1.87516
G01 X24.30767 Y1.85652
G01 X24.17747 Y1.81446
G01 X24.14836 Y1.80762
G01 X24.09028 Y1.79701
G01 X23.98995 Y1.78372
G01 X23.92449 Y1.78050
G01 X23.86549 Y1.78050
G01 X23.80000 Y1.78372
G01 X23.69967 Y1.79701
G01 X23.64158 Y1.80762
G01 X23.61248 Y1.81446
G01 X23.48228 Y1.85652
G01 X23.43226 Y1.87519
G01 X23.42706 Y1.87793
G01 X23.28032 Y1.95688
G01 X23.26483 Y1.96551
G01 X23.23158 Y1.99025
G01 X23.20003 Y2.01545
G01 X23.11537 Y2.08311
G01 X23.10232 Y2.09543
G01 X23.06132 Y2.13816
G01 X22.98718 Y2.22347
G01 X22.95540 Y2.26678
G01 X22.92292 Y2.31595
G01 X22.91819 Y2.32393
G01 X22.88344 Y2.37620
G01 X22.87135 Y2.39251
G01 X22.82228 Y2.45108
G01 X22.77354 Y2.50280
G01 X22.72302 Y2.55200
G01 X22.69038 Y2.58128
G01 X22.62807 Y2.63282
G01 X22.62497 Y2.63518
G01 X22.62497 Y3.34539
G01 X22.60918 Y3.39754
G01 X22.57242 Y3.48629
G01 X22.49389 Y3.63322
G01 X22.44052 Y3.71311
G01 X22.33480 Y3.84191
G01 X22.26689 Y3.90983
G01 X22.13808 Y4.01555
G01 X22.05820 Y4.06891
G01 X21.99043 Y4.10513
G01 X21.94911 Y4.15550
G01 X21.91680 Y4.19114
G01 X19.70395 Y6.40398
G01 X19.73224 Y6.45689
G01 X19.76900 Y6.54561
G01 X19.81452 Y6.69570
G01 X19.83097 Y6.77843
G01 X19.83097 Y7.16769
G01 X19.80225 Y7.19512
G01 X19.76239 Y7.23444
G01 X19.72998 Y7.26502
G01 X19.72861 Y7.26626
G01 X19.61253 Y7.39494
G01 X19.58211 Y7.43764
G01 X19.57517 Y7.44721
G01 X19.57009 Y7.45404
G01 X19.53496 Y7.50690
G01 X19.49150 Y7.58028
G01 X19.45897 Y7.62953
G01 X19.42935 Y7.66989
G01 X19.35922 Y7.75056
G01 X19.31828 Y7.79321
G01 X19.30672 Y7.80413
G01 X19.19661 Y7.89214
G01 X19.16374 Y7.91663
G01 X19.14777 Y7.92554
G01 X19.00967 Y7.99981
G01 X19.00357 Y8.00304
G01 X18.95452 Y8.02128
G01 X18.83121 Y8.06113
G01 X18.80461 Y8.06735
G01 X18.74657 Y8.07797
G01 X18.65183 Y8.09054
G01 X18.59054 Y8.09354
G01 X18.56316 Y8.09428
G01 X18.53136 Y8.09438
G01 X18.44167 Y8.10124
G01 X18.40342 Y8.10693
G01 X18.37200 Y8.11234
G01 X18.29938 Y8.12656
G01 X18.11884 Y8.18150
G01 X18.10868 Y8.18562
G01 X18.02823 Y8.15709
G01 X17.98348 Y8.14360
G01 X17.93700 Y8.13901
G01 X16.83880 Y8.13901
G01 X16.83880 Y7.98666
G01 X16.89753 Y7.93847
G01 X16.96545 Y7.87055
G01 X17.06494 Y7.74932
G01 X17.11831 Y7.66946
G01 X17.19224 Y7.53113
G01 X17.22900 Y7.44241
G01 X17.27452 Y7.29232
G01 X17.29097 Y7.20944
G01 X17.29097 Y6.77843
G01 X17.27452 Y6.69570
G01 X17.22900 Y6.54561
G01 X17.19224 Y6.45689
G01 X17.16082 Y6.39817
G01 X17.07060 Y6.34409
G01 X16.98953 Y6.30061
G01 X16.83268 Y6.22644
G01 X16.77279 Y6.20155
G01 X16.61594 Y6.14544
G01 X16.57078 Y6.13170
G01 X16.41396 Y6.09243
G01 X16.37856 Y6.08537
G01 X16.22171 Y6.06210
G01 X16.19187 Y6.05915
G01 X16.03505 Y6.05146
G01 X16.00693 Y6.05146
G01 X15.85008 Y6.05915
G01 X15.82024 Y6.06210
G01 X15.66339 Y6.08537
G01 X15.62799 Y6.09243
G01 X15.47117 Y6.13170
G01 X15.42600 Y6.14544
G01 X15.26916 Y6.20155
G01 X15.20927 Y6.22644
G01 X15.15913 Y6.25016
G01 X15.08740 Y6.32931
G01 X15.04358 Y6.38270
G01 X14.94915 Y6.51005
G01 X14.90645 Y6.57401
G01 X14.82334 Y6.71270
G01 X14.78049 Y6.79298
G01 X14.75097 Y6.85537
G01 X14.75097 Y7.16769
G01 X14.72225 Y7.19512
G01 X14.68239 Y7.23444
G01 X14.64998 Y7.26502
G01 X14.64861 Y7.26626
G01 X14.53253 Y7.39494
G01 X14.50211 Y7.43764
G01 X14.49517 Y7.44721
G01 X14.49009 Y7.45404
G01 X14.45496 Y7.50690
G01 X14.41150 Y7.58028
G01 X14.37897 Y7.62953
G01 X14.34935 Y7.66989
G01 X14.27922 Y7.75056
G01 X14.23828 Y7.79321
G01 X14.22672 Y7.80413
G01 X14.11661 Y7.89214
G01 X14.08374 Y7.91663
G01 X14.06777 Y7.92554
G01 X13.92967 Y7.99981
G01 X13.92357 Y8.00304
G01 X13.87452 Y8.02128
G01 X13.84386 Y8.03118
G01 X13.73282 Y8.07970
G01 X13.72898 Y8.08183
G01 X13.69870 Y8.09771
G01 X13.66990 Y8.11185
G01 X13.52169 Y8.20660
G01 X13.50162 Y8.22247
G01 X13.43960 Y8.21383
G01 X13.36497 Y8.20685
G01 X13.28308 Y8.20281
G01 X13.19878 Y8.19448
G01 X13.04196 Y8.17124
G01 X12.95042 Y8.15298
G01 X12.89464 Y8.13901
G01 X12.25291 Y8.13901
G01 X11.93008 Y7.81617
G01 X11.98494 Y7.74932
G01 X12.03831 Y7.66946
G01 X12.11224 Y7.53113
G01 X12.14900 Y7.44241
G01 X12.19452 Y7.29232
G01 X12.21097 Y7.20944
G01 X12.21097 Y6.77843
G01 X12.19452 Y6.69570
G01 X12.14900 Y6.54561
G01 X12.11224 Y6.45689
G01 X12.03831 Y6.31856
G01 X11.98494 Y6.23871
G01 X11.96597 Y6.21559
G01 X11.88545 Y6.11747
G01 X11.81753 Y6.04955
G01 X11.69629 Y5.95006
G01 X11.61644 Y5.89669
G01 X11.47811 Y5.82276
G01 X11.38939 Y5.78600
G01 X11.23930 Y5.74048
G01 X11.14509 Y5.72174
G01 X10.98901 Y5.70637
G01 X10.89297 Y5.70637
G01 X10.73689 Y5.72174
G01 X10.64268 Y5.74048
G01 X10.49259 Y5.78600
G01 X10.40387 Y5.82276
G01 X10.33887 Y5.85750
G01 X10.26554 Y5.89669
G01 X10.18568 Y5.95006
G01 X10.06445 Y6.04955
G01 X9.99653 Y6.11747
G01 X9.89703 Y6.23871
G01 X9.84367 Y6.31856
G01 X9.76973 Y6.45689
G01 X9.73298 Y6.54561
G01 X9.68746 Y6.69570
G01 X9.67097 Y6.77843
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.89464 Y8.13901 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.89464 Y8.13901
G01 X12.80554 Y8.09133
G01 X12.72568 Y8.03797
G01 X12.60445 Y7.93847
G01 X12.53653 Y7.87055
G01 X12.43703 Y7.74932
G01 X12.38367 Y7.66946
G01 X12.30973 Y7.53113
G01 X12.27298 Y7.44241
G01 X12.22746 Y7.29232
G01 X12.21097 Y7.20944
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X12.21097 Y6.77843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X12.21097 Y6.77843
G01 X12.22746 Y6.69570
G01 X12.27298 Y6.54561
G01 X12.30973 Y6.45689
G01 X12.38367 Y6.31856
G01 X12.43703 Y6.23871
G01 X12.53653 Y6.11747
G01 X12.60445 Y6.04955
G01 X12.72568 Y5.95006
G01 X12.80554 Y5.89669
G01 X12.87887 Y5.85750
G01 X12.94387 Y5.82276
G01 X13.03259 Y5.78600
G01 X13.18268 Y5.74048
G01 X13.27689 Y5.72174
G01 X13.43297 Y5.70637
G01 X13.52901 Y5.70637
G01 X13.53571 Y5.70703
G01 X13.86055 Y5.38219
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.55625 Y4.71819 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.55625 Y4.71819
G01 X17.22839 Y4.71819
G01 X17.94284 Y4.00373
G01 X17.94284 Y3.94244
G01 X17.90309 Y3.90983
G01 X17.83517 Y3.84191
G01 X17.78998 Y3.78684
G01 X17.72945 Y3.71311
G01 X17.67609 Y3.63322
G01 X17.59755 Y3.48629
G01 X17.56080 Y3.39754
G01 X17.54497 Y3.34539
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.54497 Y2.63518 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.54497 Y2.63518
G01 X17.54807 Y2.63282
G01 X17.61038 Y2.58128
G01 X17.64302 Y2.55200
G01 X17.69354 Y2.50280
G01 X17.74228 Y2.45108
G01 X17.79135 Y2.39251
G01 X17.80344 Y2.37620
G01 X17.83819 Y2.32393
G01 X17.84292 Y2.31595
G01 X17.87540 Y2.26678
G01 X17.90718 Y2.22347
G01 X17.98132 Y2.13816
G01 X18.02232 Y2.09543
G01 X18.03537 Y2.08311
G01 X18.12003 Y2.01545
G01 X18.15158 Y1.99025
G01 X18.18483 Y1.96551
G01 X18.20032 Y1.95688
G01 X18.34706 Y1.87793
G01 X18.35226 Y1.87519
G01 X18.40228 Y1.85652
G01 X18.53248 Y1.81446
G01 X18.56158 Y1.80762
G01 X18.61967 Y1.79701
G01 X18.72000 Y1.78372
G01 X18.78549 Y1.78050
G01 X18.84449 Y1.78050
G01 X18.90995 Y1.78372
G01 X19.01028 Y1.79701
G01 X19.06836 Y1.80762
G01 X19.09747 Y1.81446
G01 X19.22767 Y1.85652
G01 X19.27769 Y1.87516
G01 X19.28289 Y1.87796
G01 X19.42963 Y1.95688
G01 X19.44515 Y1.96551
G01 X19.47837 Y1.99025
G01 X19.59460 Y2.08311
G01 X19.60763 Y2.09543
G01 X19.64863 Y2.13816
G01 X19.72277 Y2.22347
G01 X19.75455 Y2.26678
G01 X19.78703 Y2.31595
G01 X19.79176 Y2.32393
G01 X19.86415 Y2.42228
G01 X19.88993 Y2.45101
G01 X19.93626 Y2.50285
G01 X20.08177 Y2.63285
G01 X20.08497 Y2.63518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.08497 Y3.34539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.08497 Y3.34539
G01 X20.10080 Y3.39754
G01 X20.13755 Y3.48629
G01 X20.17525 Y3.55682
G01 X19.62282 Y4.10920
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.49429 Y8.13400 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.49429 Y8.13400
G01 X21.91880 Y8.13400
G01 X21.91880 Y7.98666
G01 X21.97753 Y7.93847
G01 X22.04545 Y7.87055
G01 X22.14494 Y7.74932
G01 X22.19831 Y7.66946
G01 X22.27224 Y7.53113
G01 X22.30900 Y7.44241
G01 X22.35093 Y7.30408
G01 X22.35276 Y7.29176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.35276 Y6.69629 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.35276 Y6.69629
G01 X22.35093 Y6.68392
G01 X22.30900 Y6.54561
G01 X22.27224 Y6.45689
G01 X22.19831 Y6.31856
G01 X22.14494 Y6.23871
G01 X22.04545 Y6.11747
G01 X21.97753 Y6.04955
G01 X21.94674 Y6.02428
G01 X21.85629 Y5.95006
G01 X21.77644 Y5.89669
G01 X21.63811 Y5.82276
G01 X21.54939 Y5.78600
G01 X21.39930 Y5.74048
G01 X21.30509 Y5.72174
G01 X21.14901 Y5.70637
G01 X21.05297 Y5.70637
G01 X20.89689 Y5.72174
G01 X20.80268 Y5.74048
G01 X20.65259 Y5.78600
G01 X20.56387 Y5.82276
G01 X20.42554 Y5.89669
G01 X20.34568 Y5.95006
G01 X20.22445 Y6.04955
G01 X20.15653 Y6.11747
G01 X20.05703 Y6.23871
G01 X20.00367 Y6.31856
G01 X19.92973 Y6.45689
G01 X19.89298 Y6.54561
G01 X19.84746 Y6.69570
G01 X19.83097 Y6.77843
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.83097 Y7.16769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.83097 Y7.16769
G01 X19.86079 Y7.19502
G01 X19.93539 Y7.26563
G01 X20.03138 Y7.37358
G01 X20.04748 Y7.39552
G01 X20.05498 Y7.40553
G01 X20.08675 Y7.44721
G01 X20.12701 Y7.50693
G01 X20.17045 Y7.58028
G01 X20.20298 Y7.62953
G01 X20.23262 Y7.66992
G01 X20.30273 Y7.75056
G01 X20.33720 Y7.78704
G01 X20.34362 Y7.79326
G01 X20.40997 Y7.86933
G01 X20.41121 Y7.87568
G01 X20.41792 Y7.91130
G01 X20.42856 Y8.02438
G01 X20.42856 Y8.44691
G01 X20.42564 Y8.50614
G01 X20.42467 Y8.51599
G01 X20.42302 Y8.52186
G01 X20.41086 Y8.58823
G01 X20.40905 Y8.60431
G01 X20.40872 Y8.62402
G01 X20.40872 Y10.42402
G01 X20.40905 Y10.44370
G01 X20.41771 Y10.50210
G01 X20.44781 Y10.57479
G01 X20.49574 Y10.63722
G01 X20.55820 Y10.68518
G01 X20.63095 Y10.71530
G01 X20.68937 Y10.72396
G01 X20.70895 Y10.72427
G01 X22.50900 Y10.72427
G01 X22.52856 Y10.72396
G01 X22.54570 Y10.72203
G01 X22.58703 Y10.71528
G01 X22.65975 Y10.68518
G01 X22.71753 Y10.64129
G01 X22.72221 Y10.63725
G01 X22.77014 Y10.57479
G01 X22.80023 Y10.50210
G01 X22.80890 Y10.44370
G01 X22.80923 Y10.42402
G01 X22.80923 Y8.62402
G01 X22.80890 Y8.60433
G01 X22.79698 Y8.53057
G01 X22.79434 Y8.52107
G01 X22.78891 Y8.50266
G01 X22.72337 Y8.29240
G01 X22.70747 Y8.24520
G01 X22.69764 Y8.21810
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X24.91130 Y7.92311 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X24.91130 Y7.92311
G01 X24.96081 Y7.94955
G01 X25.03508 Y8.01048
G01 X25.06160 Y8.03700
G01 X25.12253 Y8.11127
G01 X25.14610 Y8.15542
G01 X25.04915 Y8.38348
G01 X25.03444 Y8.42100
G01 X24.99309 Y8.53626
G01 X24.98969 Y8.54604
G01 X24.98105 Y8.60426
G01 X24.98072 Y8.62402
G01 X24.98072 Y10.42402
G01 X24.98105 Y10.44370
G01 X24.98971 Y10.50210
G01 X25.01981 Y10.57479
G01 X25.06774 Y10.63722
G01 X25.13020 Y10.68518
G01 X25.20295 Y10.71530
G01 X25.26137 Y10.72396
G01 X25.28098 Y10.72427
G01 X27.08100 Y10.72427
G01 X27.10056 Y10.72396
G01 X27.11770 Y10.72203
G01 X27.15903 Y10.71528
G01 X27.23175 Y10.68518
G01 X27.28953 Y10.64129
G01 X27.29421 Y10.63725
G01 X27.34214 Y10.57479
G01 X27.37223 Y10.50210
G01 X27.38090 Y10.44370
G01 X27.38123 Y10.42402
G01 X27.38123 Y9.33875
G01 X27.39311 Y9.21929
G01 X27.39685 Y9.20052
G01 X27.40744 Y9.18465
G01 X27.48351 Y9.09179
G01 X27.63462 Y8.94068
G01 X27.65491 Y8.91935
G01 X27.67803 Y8.89384
G01 X27.69845 Y8.86631
G01 X27.73126 Y8.81721
G01 X27.74894 Y8.78775
G01 X27.76362 Y8.75671
G01 X27.78618 Y8.70220
G01 X27.79774 Y8.66989
G01 X27.80213 Y8.65239
G01 X27.80609 Y8.63654
G01 X27.81760 Y8.57871
G01 X27.82265 Y8.54464
G01 X27.82433 Y8.51041
G01 X27.82507 Y8.48087
G01 X27.82507 Y8.07012
G01 X27.82537 Y8.05130
G01 X27.82555 Y8.04523
G01 X27.84584 Y7.90677
G01 X27.84683 Y7.90561
G01 X27.87140 Y7.87645
G01 X27.93764 Y7.80893
G01 X27.95428 Y7.79321
G01 X27.99522 Y7.75056
G01 X28.06535 Y7.66989
G01 X28.09497 Y7.62953
G01 X28.12750 Y7.58028
G01 X28.17096 Y7.50690
G01 X28.20609 Y7.45404
G01 X28.21117 Y7.44721
G01 X28.21811 Y7.43764
G01 X28.24853 Y7.39494
G01 X28.36461 Y7.26626
G01 X28.36598 Y7.26502
G01 X28.39839 Y7.23444
G01 X28.43825 Y7.19512
G01 X28.46697 Y7.16769
G01 X28.46697 Y6.77843
G01 X28.45052 Y6.69570
G01 X28.40500 Y6.54561
G01 X28.36824 Y6.45689
G01 X28.29431 Y6.31856
G01 X28.24094 Y6.23871
G01 X28.14145 Y6.11747
G01 X28.07353 Y6.04955
G01 X27.95229 Y5.95006
G01 X27.87244 Y5.89669
G01 X27.73411 Y5.82276
G01 X27.64539 Y5.78600
G01 X27.49530 Y5.74048
G01 X27.40109 Y5.72174
G01 X27.24501 Y5.70637
G01 X27.14897 Y5.70637
G01 X26.99289 Y5.72174
G01 X26.89868 Y5.74048
G01 X26.74859 Y5.78600
G01 X26.65987 Y5.82276
G01 X26.52154 Y5.89669
G01 X26.44168 Y5.95006
G01 X26.32045 Y6.04955
G01 X26.25253 Y6.11747
G01 X26.15303 Y6.23871
G01 X26.09967 Y6.31856
G01 X26.02573 Y6.45689
G01 X25.98898 Y6.54561
G01 X25.94346 Y6.69570
G01 X25.92471 Y6.78991
G01 X25.90935 Y6.94599
G01 X25.90935 Y7.04203
G01 X25.92471 Y7.19811
G01 X25.94346 Y7.29232
G01 X25.98898 Y7.44241
G01 X26.02573 Y7.53113
G01 X26.09967 Y7.66946
G01 X26.15303 Y7.74932
G01 X26.25253 Y7.87055
G01 X26.32045 Y7.93847
G01 X26.33482 Y7.95026
G01 X26.33482 Y8.13294
G01 X26.33376 Y8.13400
G01 X25.28098 Y8.13400
G01 X25.18540 Y8.14343
G01 X25.14610 Y8.15542
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.46697 Y7.16769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.46697 Y7.16769
G01 X28.49679 Y7.19502
G01 X28.57139 Y7.26563
G01 X28.66738 Y7.37358
G01 X28.68348 Y7.39552
G01 X28.69098 Y7.40553
G01 X28.72275 Y7.44721
G01 X28.76301 Y7.50693
G01 X28.80645 Y7.58028
G01 X28.83898 Y7.62953
G01 X28.86862 Y7.66989
G01 X28.93873 Y7.75056
G01 X28.97967 Y7.79321
G01 X28.99123 Y7.80413
G01 X29.10134 Y7.89214
G01 X29.13418 Y7.91663
G01 X29.15018 Y7.92554
G01 X29.28828 Y7.99981
G01 X29.29440 Y8.00304
G01 X29.34343 Y8.02128
G01 X29.37231 Y8.03062
G01 X29.38031 Y8.03327
G01 X29.38318 Y8.03423
G01 X29.48902 Y8.08165
G01 X29.50401 Y8.09014
G01 X29.53875 Y8.10842
G01 X29.54795 Y8.11295
G01 X29.69621 Y8.20749
G01 X29.71274 Y8.22052
G01 X29.77815 Y8.21140
G01 X29.85298 Y8.20434
G01 X29.93464 Y8.20032
G01 X30.01841 Y8.19204
G01 X30.17525 Y8.16878
G01 X30.26626 Y8.15064
G01 X30.33250 Y8.13405
G01 X30.41244 Y8.09133
G01 X30.49229 Y8.03797
G01 X30.61353 Y7.93847
G01 X30.68145 Y7.87055
G01 X30.78094 Y7.74932
G01 X30.83431 Y7.66946
G01 X30.90824 Y7.53113
G01 X30.94500 Y7.44241
G01 X30.99052 Y7.29232
G01 X31.00697 Y7.20944
G01 X31.00697 Y6.77843
G01 X30.99052 Y6.69570
G01 X30.94500 Y6.54561
G01 X30.90824 Y6.45689
G01 X30.83431 Y6.31856
G01 X30.78094 Y6.23871
G01 X30.68145 Y6.11747
G01 X30.61353 Y6.04955
G01 X30.54866 Y5.99631
G01 X30.54574 Y5.96654
G01 X30.52699 Y5.87234
G01 X30.50708 Y5.80668
G01 X30.47032 Y5.71793
G01 X30.43796 Y5.65743
G01 X30.38460 Y5.57757
G01 X30.34109 Y5.52453
G01 X30.30878 Y5.48890
G01 X29.08173 Y4.26187
G01 X29.02029 Y4.23988
G01 X28.93324 Y4.20394
G01 X28.77325 Y4.12827
G01 X28.70899 Y4.09398
G01 X28.56164 Y4.00566
G01 X28.51214 Y3.97262
G01 X28.37683 Y3.87226
G01 X28.33662 Y3.83927
G01 X28.21300 Y3.72726
G01 X28.17774 Y3.69200
G01 X28.06573 Y3.56838
G01 X28.03274 Y3.52817
G01 X27.93238 Y3.39286
G01 X27.89934 Y3.34336
G01 X27.81102 Y3.19601
G01 X27.77673 Y3.13175
G01 X27.70497 Y2.98001
G01 X27.70497 Y2.63518
G01 X27.70177 Y2.63285
G01 X27.55626 Y2.50285
G01 X27.50993 Y2.45101
G01 X27.48415 Y2.42228
G01 X27.41176 Y2.32393
G01 X27.40703 Y2.31595
G01 X27.37455 Y2.26678
G01 X27.34277 Y2.22347
G01 X27.26863 Y2.13816
G01 X27.22763 Y2.09543
G01 X27.21460 Y2.08311
G01 X27.09837 Y1.99025
G01 X27.06515 Y1.96551
G01 X27.04963 Y1.95688
G01 X26.90289 Y1.87796
G01 X26.89769 Y1.87516
G01 X26.84767 Y1.85652
G01 X26.71747 Y1.81446
G01 X26.68836 Y1.80762
G01 X26.63028 Y1.79701
G01 X26.52995 Y1.78372
G01 X26.46449 Y1.78050
G01 X26.40549 Y1.78050
G01 X26.34000 Y1.78372
G01 X26.23967 Y1.79701
G01 X26.18158 Y1.80762
G01 X26.15248 Y1.81446
G01 X26.02228 Y1.85652
G01 X25.97226 Y1.87519
G01 X25.96706 Y1.87793
G01 X25.82032 Y1.95688
G01 X25.80483 Y1.96551
G01 X25.77158 Y1.99025
G01 X25.74003 Y2.01545
G01 X25.65537 Y2.08311
G01 X25.64232 Y2.09543
G01 X25.60132 Y2.13816
G01 X25.52718 Y2.22347
G01 X25.49540 Y2.26678
G01 X25.46292 Y2.31595
G01 X25.45819 Y2.32393
G01 X25.42344 Y2.37620
G01 X25.41135 Y2.39251
G01 X25.36228 Y2.45108
G01 X25.31354 Y2.50280
G01 X25.26302 Y2.55200
G01 X25.23038 Y2.58128
G01 X25.16807 Y2.63282
G01 X25.16497 Y2.63518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.16497 Y3.34539 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.16497 Y3.34539
G01 X25.18080 Y3.39754
G01 X25.21755 Y3.48629
G01 X25.29609 Y3.63322
G01 X25.34945 Y3.71311
G01 X25.40998 Y3.78684
G01 X25.45517 Y3.84191
G01 X25.52309 Y3.90983
G01 X25.65189 Y4.01555
G01 X25.73178 Y4.06891
G01 X25.87871 Y4.14745
G01 X25.96746 Y4.18420
G01 X26.12692 Y4.23259
G01 X26.22113 Y4.25133
G01 X26.38697 Y4.26767
G01 X26.48301 Y4.26767
G01 X26.64884 Y4.25133
G01 X26.68763 Y4.24361
G01 X28.68889 Y6.24490
G01 X28.63967 Y6.31856
G01 X28.56573 Y6.45689
G01 X28.52898 Y6.54561
G01 X28.48346 Y6.69570
G01 X28.46697 Y6.77843
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X29.08173 Y4.26187 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X29.08173 Y4.26187
G01 X29.12163 Y4.25794
G01 X30.94985 Y6.08615
G01 X30.98546 Y6.11844
G01 X31.03852 Y6.16197
G01 X31.11838 Y6.21534
G01 X31.17888 Y6.24770
G01 X31.21688 Y6.26342
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X33.54697 Y7.16769 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X33.54697 Y7.16769
G01 X33.51825 Y7.19512
G01 X33.47839 Y7.23444
G01 X33.44598 Y7.26502
G01 X33.44461 Y7.26626
G01 X33.32853 Y7.39494
G01 X33.29811 Y7.43764
G01 X33.29117 Y7.44721
G01 X33.28609 Y7.45404
G01 X33.25096 Y7.50690
G01 X33.20750 Y7.58028
G01 X33.17497 Y7.62953
G01 X33.14535 Y7.66989
G01 X33.07522 Y7.75056
G01 X33.03428 Y7.79321
G01 X33.01777 Y7.80883
G01 X32.95140 Y7.87640
G01 X32.92681 Y7.90556
G01 X32.92579 Y7.90675
G01 X32.91213 Y7.97287
G01 X32.90758 Y8.00271
G01 X32.90565 Y8.01648
G01 X32.89760 Y8.07071
G01 X32.88609 Y8.12854
G01 X32.87776 Y8.16184
G01 X32.86618 Y8.19420
G01 X32.84360 Y8.24871
G01 X32.82894 Y8.27972
G01 X32.81126 Y8.30921
G01 X32.77845 Y8.35831
G01 X32.75803 Y8.38584
G01 X32.73491 Y8.41135
G01 X32.71459 Y8.43268
G01 X32.05551 Y9.09179
G01 X31.97946 Y9.18465
G01 X31.96885 Y9.20052
G01 X31.96511 Y9.21929
G01 X31.95323 Y9.33875
G01 X31.95323 Y10.42402
G01 X31.95290 Y10.44370
G01 X31.94423 Y10.50210
G01 X31.91414 Y10.57479
G01 X31.86621 Y10.63725
G01 X31.86153 Y10.64129
G01 X31.80375 Y10.68518
G01 X31.73103 Y10.71528
G01 X31.68970 Y10.72203
G01 X31.67256 Y10.72396
G01 X31.65297 Y10.72427
G01 X29.85298 Y10.72427
G01 X29.83337 Y10.72396
G01 X29.77495 Y10.71530
G01 X29.70220 Y10.68518
G01 X29.63974 Y10.63722
G01 X29.59181 Y10.57479
G01 X29.56171 Y10.50210
G01 X29.55305 Y10.44370
G01 X29.55272 Y10.42402
G01 X29.55272 Y8.62402
G01 X29.55305 Y8.60426
G01 X29.56169 Y8.54599
G01 X29.58120 Y8.49600
G01 X29.63207 Y8.38099
G01 X29.64993 Y8.34350
G01 X29.71274 Y8.22052
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.33250 Y8.13405 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.33250 Y8.13405
G01 X30.90576 Y8.13400
G01 X31.25892 Y7.78084
G01 X31.23303 Y7.74932
G01 X31.17967 Y7.66946
G01 X31.10573 Y7.53113
G01 X31.06898 Y7.44241
G01 X31.02346 Y7.29232
G01 X31.00697 Y7.20944
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.00697 Y6.77843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.00697 Y6.77843
G01 X31.02346 Y6.69570
G01 X31.06898 Y6.54561
G01 X31.10573 Y6.45689
G01 X31.17967 Y6.31856
G01 X31.21645 Y6.26355
G01 X31.21688 Y6.26342
G01 X31.25150 Y6.25389
G01 X31.27936 Y6.24584
G01 X31.35831 Y6.22189
G01 X31.42950 Y6.19707
G01 X31.44030 Y6.19278
G01 X31.50062 Y6.17162
G01 X31.51167 Y6.16827
G01 X31.54383 Y6.15765
G01 X31.65838 Y6.11666
G01 X31.71063 Y6.10078
G01 X31.86745 Y6.06152
G01 X31.90961 Y6.05311
G01 X32.06646 Y6.02984
G01 X32.10283 Y6.02623
G01 X32.25968 Y6.01854
G01 X32.29430 Y6.01854
G01 X32.45112 Y6.02623
G01 X32.48749 Y6.02984
G01 X32.64433 Y6.05311
G01 X32.68650 Y6.06152
G01 X32.84332 Y6.10078
G01 X32.89557 Y6.11666
G01 X33.03570 Y6.16680
G01 X33.04807 Y6.17802
G01 X33.09297 Y6.22293
G01 X33.19841 Y6.33926
G01 X33.24024 Y6.39027
G01 X33.33468 Y6.51760
G01 X33.37555 Y6.57886
G01 X33.45866 Y6.71755
G01 X33.49986 Y6.79474
G01 X33.54697 Y6.89433
G01 X33.54697 Y7.16769
G01 X33.57679 Y7.19502
G01 X33.65139 Y7.26563
G01 X33.74738 Y7.37358
G01 X33.76348 Y7.39552
G01 X33.77098 Y7.40553
G01 X33.80275 Y7.44721
G01 X33.84301 Y7.50693
G01 X33.88645 Y7.58028
G01 X33.91898 Y7.62953
G01 X33.94862 Y7.66989
G01 X34.01873 Y7.75056
G01 X34.05967 Y7.79321
G01 X34.07123 Y7.80413
G01 X34.17489 Y7.88699
G01 X34.18131 Y7.89219
G01 X34.22764 Y7.93029
G01 X34.26739 Y7.96583
G01 X34.29516 Y7.99280
G01 X34.34400 Y8.04528
G01 X34.39709 Y8.10817
G01 X34.45203 Y8.17965
G01 X34.53554 Y8.19204
G01 X34.61931 Y8.20032
G01 X34.77616 Y8.20802
G01 X34.85782 Y8.20802
G01 X35.01464 Y8.20032
G01 X35.09841 Y8.19204
G01 X35.25525 Y8.16878
G01 X35.34626 Y8.15064
G01 X35.41250 Y8.13405
G01 X35.49244 Y8.09133
G01 X35.57229 Y8.03797
G01 X35.58068 Y8.03108
G01 X35.58088 Y8.03093
G01 X35.68896 Y7.93296
G01 X35.75591 Y7.86601
G01 X35.85395 Y7.75780
G01 X35.86094 Y7.74932
G01 X35.91431 Y7.66946
G01 X35.98824 Y7.53113
G01 X36.02500 Y7.44241
G01 X36.07052 Y7.29232
G01 X36.08697 Y7.20944
G01 X36.08697 Y6.77843
G01 X36.07052 Y6.69570
G01 X36.02500 Y6.54561
G01 X35.98824 Y6.45689
G01 X35.91431 Y6.31856
G01 X35.86094 Y6.23871
G01 X35.84197 Y6.21559
G01 X35.76145 Y6.11747
G01 X35.69353 Y6.04955
G01 X35.57229 Y5.95006
G01 X35.49244 Y5.89669
G01 X35.35411 Y5.82276
G01 X35.26539 Y5.78600
G01 X35.11530 Y5.74048
G01 X35.02109 Y5.72174
G01 X34.86501 Y5.70637
G01 X34.76897 Y5.70637
G01 X34.72190 Y5.71100
G01 X34.39302 Y5.38217
G01 X33.70862 Y5.09870
G01 X33.68876 Y5.09103
G01 X33.62015 Y5.06647
G01 X33.58695 Y5.05639
G01 X33.51835 Y5.03919
G01 X33.49010 Y5.03355
G01 X33.42150 Y5.02339
G01 X33.39605 Y5.02088
G01 X33.32744 Y5.01750
G01 X33.31515 Y5.01719
G01 X32.24482 Y5.01719
G01 X32.23255 Y5.01689
G01 X32.16392 Y5.01351
G01 X32.13844 Y5.01100
G01 X32.06984 Y5.00084
G01 X32.04159 Y4.99520
G01 X31.97299 Y4.97800
G01 X31.93979 Y4.96792
G01 X31.87118 Y4.94336
G01 X31.85132 Y4.93569
G01 X31.78559 Y4.90848
G01 X31.07007 Y4.19294
G01 X31.05424 Y4.17633
G01 X31.00812 Y4.12543
G01 X30.97809 Y4.08885
G01 X30.93679 Y4.03315
G01 X30.90822 Y3.99032
G01 X30.87185 Y3.92967
G01 X30.84408 Y3.87760
G01 X30.83552 Y3.85951
G01 X30.72595 Y3.76022
G01 X30.68478 Y3.71905
G01 X30.57276 Y3.59543
G01 X30.53438 Y3.54867
G01 X30.43405 Y3.41336
G01 X30.39608 Y3.35649
G01 X30.30776 Y3.20915
G01 X30.26898 Y3.13645
G01 X30.24497 Y3.08568
G01 X30.24497 Y2.63518
G01 X30.24177 Y2.63285
G01 X30.09626 Y2.50285
G01 X30.04993 Y2.45101
G01 X30.02415 Y2.42228
G01 X29.95176 Y2.32393
G01 X29.94703 Y2.31595
G01 X29.91455 Y2.26678
G01 X29.88277 Y2.22347
G01 X29.80863 Y2.13816
G01 X29.76763 Y2.09543
G01 X29.75460 Y2.08311
G01 X29.63837 Y1.99025
G01 X29.60515 Y1.96551
G01 X29.58963 Y1.95688
G01 X29.44289 Y1.87796
G01 X29.43769 Y1.87516
G01 X29.38767 Y1.85652
G01 X29.25747 Y1.81446
G01 X29.22836 Y1.80762
G01 X29.17028 Y1.79701
G01 X29.06995 Y1.78372
G01 X29.00449 Y1.78050
G01 X28.94549 Y1.78050
G01 X28.88000 Y1.78372
G01 X28.77967 Y1.79701
G01 X28.72158 Y1.80762
G01 X28.69248 Y1.81446
G01 X28.56228 Y1.85652
G01 X28.51226 Y1.87519
G01 X28.50706 Y1.87793
G01 X28.36032 Y1.95688
G01 X28.34483 Y1.96551
G01 X28.31158 Y1.99025
G01 X28.28003 Y2.01545
G01 X28.19537 Y2.08311
G01 X28.18232 Y2.09543
G01 X28.14132 Y2.13816
G01 X28.06718 Y2.22347
G01 X28.03540 Y2.26678
G01 X28.00292 Y2.31595
G01 X27.99819 Y2.32393
G01 X27.96344 Y2.37620
G01 X27.95135 Y2.39251
G01 X27.90228 Y2.45108
G01 X27.85354 Y2.50280
G01 X27.80302 Y2.55200
G01 X27.77038 Y2.58128
G01 X27.70807 Y2.63282
G01 X27.70497 Y2.63518
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.24497 Y2.63518 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.24497 Y2.63518
G01 X30.24807 Y2.63282
G01 X30.31038 Y2.58128
G01 X30.34302 Y2.55200
G01 X30.39354 Y2.50280
G01 X30.44228 Y2.45108
G01 X30.49135 Y2.39251
G01 X30.50344 Y2.37620
G01 X30.53819 Y2.32393
G01 X30.54292 Y2.31595
G01 X30.57540 Y2.26678
G01 X30.60718 Y2.22347
G01 X30.68132 Y2.13816
G01 X30.72232 Y2.09543
G01 X30.73537 Y2.08311
G01 X30.82003 Y2.01545
G01 X30.85158 Y1.99025
G01 X30.88483 Y1.96551
G01 X30.90032 Y1.95688
G01 X31.04706 Y1.87793
G01 X31.05226 Y1.87519
G01 X31.10228 Y1.85652
G01 X31.23248 Y1.81446
G01 X31.26158 Y1.80762
G01 X31.31967 Y1.79701
G01 X31.42000 Y1.78372
G01 X31.48549 Y1.78050
G01 X31.54449 Y1.78050
G01 X31.60995 Y1.78372
G01 X31.71028 Y1.79701
G01 X31.76836 Y1.80762
G01 X31.79747 Y1.81446
G01 X31.92767 Y1.85652
G01 X31.97769 Y1.87516
G01 X31.98289 Y1.87796
G01 X32.12963 Y1.95688
G01 X32.14515 Y1.96551
G01 X32.17837 Y1.99025
G01 X32.29458 Y2.08311
G01 X32.30763 Y2.09543
G01 X32.32800 Y2.11563
G01 X32.34921 Y2.13767
G01 X32.41665 Y2.19810
G01 X32.44708 Y2.22167
G01 X32.48020 Y2.24575
G01 X32.54091 Y2.28715
G01 X32.71769 Y2.38156
G01 X32.72594 Y2.38502
G01 X32.74268 Y2.47056
G01 X32.76740 Y2.63721
G01 X32.77578 Y2.72213
G01 X32.78396 Y2.88875
G01 X32.78396 Y2.97128
G01 X32.77578 Y3.13792
G01 X32.76740 Y3.22284
G01 X32.74268 Y3.38949
G01 X32.72424 Y3.48199
G01 X32.71497 Y3.51892
G01 X32.65389 Y3.63322
G01 X32.60781 Y3.70219
G01 X32.71497 Y3.70219
G01 X32.79282 Y3.78001
G01 X33.20496 Y3.98611
G01 X34.90496 Y3.98611
G01 X35.31715 Y3.78004
G01 X35.38047 Y3.71669
G01 X38.72182 Y3.71669
G01 X38.76860 Y3.71783
G01 X38.83721 Y3.72121
G01 X38.93216 Y3.73058
G01 X38.93612 Y3.73117
G01 X42.69189 Y3.73117
G01 X44.11482 Y5.15413
G01 X44.11482 Y5.71013
G01 X44.08140 Y5.71343
G01 X43.98947 Y5.74132
G01 X43.90476 Y5.78659
G01 X43.83049 Y5.84752
G01 X43.76956 Y5.92179
G01 X43.72430 Y6.00650
G01 X43.69641 Y6.09842
G01 X43.68698 Y6.19400
G01 X43.68698 Y6.68422
G01 X43.68876 Y6.69629
G01 X43.69811 Y6.79095
G01 X43.70583 Y6.94777
G01 X43.70583 Y7.04025
G01 X43.69811 Y7.19710
G01 X43.68876 Y7.29176
G01 X43.68698 Y7.30383
G01 X43.68696 Y7.42054
G01 X43.69501 Y7.43103
G01 X43.85183 Y7.73393
G01 X43.86189 Y7.77144
G01 X43.86753 Y7.79402
G01 X43.88488 Y7.86961
G01 X43.91581 Y7.94480
G01 X43.96374 Y8.00726
G01 X44.02620 Y8.05519
G01 X44.09895 Y8.08531
G01 X44.15716 Y8.09395
G01 X44.17698 Y8.09428
G01 X45.77697 Y8.09428
G01 X45.79666 Y8.09395
G01 X45.85503 Y8.08529
G01 X45.92775 Y8.05519
G01 X45.99021 Y8.00726
G01 X46.03814 Y7.94480
G01 X46.05828 Y7.89926
G01 X46.06823 Y7.87208
G01 X46.07690 Y7.81371
G01 X46.07723 Y7.79402
G01 X46.07723 Y6.19403
G01 X46.07690 Y6.17434
G01 X46.06823 Y6.11597
G01 X46.03814 Y6.04325
G01 X45.99021 Y5.98079
G01 X45.92775 Y5.93289
G01 X45.87354 Y5.90939
G01 X45.81871 Y5.89167
G01 X45.77697 Y5.88036
G01 X45.75843 Y5.87503
G01 X45.73933 Y5.86924
G01 X45.65924 Y5.83957
G01 X45.62440 Y5.72143
G01 X45.61695 Y5.68392
G01 X45.60507 Y5.56449
G01 X45.60507 Y4.80617
G01 X45.60433 Y4.77666
G01 X45.60265 Y4.74237
G01 X45.59760 Y4.70838
G01 X45.59414 Y4.68753
G01 X45.58609 Y4.65055
G01 X45.58363 Y4.64072
G01 X45.57776 Y4.61725
G01 X45.57332 Y4.60485
G01 X45.56618 Y4.58489
G01 X45.54362 Y4.53038
G01 X45.52892 Y4.49931
G01 X45.51129 Y4.46987
G01 X45.47847 Y4.42078
G01 X45.45803 Y4.39322
G01 X45.43494 Y4.36774
G01 X45.41462 Y4.34641
G01 X43.49961 Y2.43140
G01 X43.47827 Y2.41108
G01 X43.45280 Y2.38796
G01 X43.42524 Y2.36754
G01 X43.37614 Y2.33473
G01 X43.34668 Y2.31707
G01 X43.31564 Y2.30239
G01 X43.27373 Y2.28448
G01 X43.26113 Y2.27981
G01 X43.22882 Y2.26825
G01 X43.19547 Y2.25990
G01 X43.13763 Y2.24839
G01 X43.10362 Y2.24334
G01 X43.06936 Y2.24166
G01 X43.03982 Y2.24092
G01 X35.52998 Y2.24092
G01 X35.47075 Y2.23803
G01 X35.45162 Y2.23612
G01 X35.26094 Y2.18723
G01 X35.25952 Y2.18664
G01 X35.24456 Y2.15058
G01 X35.21964 Y2.08001
G01 X35.20405 Y2.02667
G01 X35.16612 Y1.92927
G01 X35.11819 Y1.86681
G01 X35.05576 Y1.81890
G01 X34.98301 Y1.78875
G01 X34.92462 Y1.78009
G01 X34.90496 Y1.77976
G01 X33.20496 Y1.77976
G01 X33.18533 Y1.78009
G01 X33.12693 Y1.78875
G01 X33.05419 Y1.81890
G01 X32.99176 Y1.86681
G01 X32.94385 Y1.92924
G01 X32.91002 Y2.01324
G01 X32.88878 Y2.08001
G01 X32.88269 Y2.09945
G01 X32.76867 Y2.32446
G01 X32.74248 Y2.36195
G01 X32.72594 Y2.38502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.71497 Y3.51892 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.71497 Y3.51892
G01 X32.71497 Y3.70219
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.39302 Y5.38217 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.39302 Y5.38217
G01 X38.37389 Y5.38217
G01 X39.03188 Y6.04018
G01 X39.02045 Y6.04955
G01 X38.95253 Y6.11747
G01 X38.85303 Y6.23871
G01 X38.79967 Y6.31856
G01 X38.72573 Y6.45689
G01 X38.68898 Y6.54561
G01 X38.64346 Y6.69570
G01 X38.62697 Y6.77843
G01 X38.62697 Y7.16769
G01 X38.59825 Y7.19512
G01 X38.55839 Y7.23444
G01 X38.52598 Y7.26502
G01 X38.52461 Y7.26626
G01 X38.40853 Y7.39494
G01 X38.37811 Y7.43764
G01 X38.37117 Y7.44721
G01 X38.36609 Y7.45404
G01 X38.33096 Y7.50690
G01 X38.28750 Y7.58028
G01 X38.25497 Y7.62953
G01 X38.22535 Y7.66989
G01 X38.15522 Y7.75056
G01 X38.11428 Y7.79321
G01 X38.10272 Y7.80413
G01 X37.99261 Y7.89214
G01 X37.95974 Y7.91663
G01 X37.94377 Y7.92554
G01 X37.80567 Y7.99981
G01 X37.79959 Y8.00304
G01 X37.75057 Y8.02128
G01 X37.74521 Y8.02300
G01 X37.68057 Y8.04807
G01 X37.67978 Y8.04843
G01 X37.66307 Y8.06174
G01 X37.61204 Y8.10728
G01 X36.62751 Y9.09179
G01 X36.55146 Y9.18465
G01 X36.54085 Y9.20052
G01 X36.53711 Y9.21929
G01 X36.52523 Y9.33875
G01 X36.52523 Y10.42402
G01 X36.52490 Y10.44370
G01 X36.51623 Y10.50210
G01 X36.48614 Y10.57479
G01 X36.43821 Y10.63725
G01 X36.43353 Y10.64129
G01 X36.37575 Y10.68518
G01 X36.30303 Y10.71528
G01 X36.26170 Y10.72203
G01 X36.24456 Y10.72396
G01 X36.22500 Y10.72427
G01 X34.42495 Y10.72427
G01 X34.40537 Y10.72396
G01 X34.34695 Y10.71530
G01 X34.27420 Y10.68518
G01 X34.21174 Y10.63722
G01 X34.16381 Y10.57479
G01 X34.13371 Y10.50210
G01 X34.12505 Y10.44370
G01 X34.12472 Y10.42402
G01 X34.12472 Y8.62402
G01 X34.12505 Y8.60426
G01 X34.13371 Y8.54599
G01 X34.16381 Y8.47327
G01 X34.24116 Y8.37960
G01 X34.33750 Y8.28419
G01 X34.36966 Y8.25397
G01 X34.42495 Y8.20461
G01 X34.45203 Y8.17965
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.41250 Y8.13405 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.41250 Y8.13405
G01 X35.47776 Y8.13400
G01 X35.58068 Y8.03108
G01 X35.68896 Y7.93296
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.75591 Y7.86601 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.75591 Y7.86601
G01 X35.85395 Y7.75783
G01 X35.85395 Y7.75780
G01 X36.15494 Y7.45681
G01 X36.14898 Y7.44241
G01 X36.10346 Y7.29232
G01 X36.08697 Y7.20944
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.08697 Y6.77843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.08697 Y6.77843
G01 X36.10346 Y6.69570
G01 X36.14898 Y6.54561
G01 X36.18573 Y6.45689
G01 X36.25967 Y6.31856
G01 X36.31303 Y6.23871
G01 X36.41253 Y6.11747
G01 X36.48045 Y6.04955
G01 X36.60168 Y5.95006
G01 X36.68154 Y5.89669
G01 X36.75487 Y5.85750
G01 X36.81987 Y5.82276
G01 X36.90859 Y5.78600
G01 X37.05868 Y5.74048
G01 X37.15289 Y5.72174
G01 X37.30897 Y5.70637
G01 X37.40501 Y5.70637
G01 X37.56109 Y5.72174
G01 X37.65530 Y5.74048
G01 X37.80539 Y5.78600
G01 X37.89411 Y5.82276
G01 X38.03244 Y5.89669
G01 X38.11229 Y5.95006
G01 X38.23353 Y6.04955
G01 X38.30145 Y6.11747
G01 X38.38197 Y6.21559
G01 X38.40094 Y6.23871
G01 X38.45431 Y6.31856
G01 X38.52824 Y6.45689
G01 X38.56500 Y6.54561
G01 X38.61052 Y6.69570
G01 X38.62697 Y6.77843
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.93612 Y3.73117 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.93612 Y3.73117
G01 X38.99802 Y3.74991
G01 X39.08677 Y3.78669
G01 X39.14727 Y3.81903
G01 X39.22715 Y3.87239
G01 X39.28019 Y3.91593
G01 X39.31580 Y3.94821
G01 X40.46878 Y5.10122
G01 X40.50109 Y5.13685
G01 X40.54460 Y5.18989
G01 X40.59796 Y5.26975
G01 X40.63032 Y5.33027
G01 X40.66708 Y5.41900
G01 X40.68699 Y5.48466
G01 X40.70574 Y5.57886
G01 X40.71244 Y5.64717
G01 X40.71480 Y5.69517
G01 X40.71480 Y6.00137
G01 X40.77353 Y6.04955
G01 X40.84145 Y6.11747
G01 X40.92197 Y6.21559
G01 X40.94094 Y6.23871
G01 X40.99431 Y6.31856
G01 X41.06824 Y6.45689
G01 X41.10500 Y6.54561
G01 X41.15052 Y6.69570
G01 X41.16697 Y6.77843
G01 X41.16697 Y7.04168
G01 X41.09634 Y7.19100
G01 X41.05735 Y7.26405
G01 X40.97424 Y7.40274
G01 X40.93578 Y7.46037
G01 X40.84135 Y7.58770
G01 X40.80218 Y7.63545
G01 X40.69672 Y7.75181
G01 X40.65476 Y7.79377
G01 X40.53840 Y7.89923
G01 X40.49065 Y7.93840
G01 X40.36332 Y8.03283
G01 X40.30569 Y8.07129
G01 X40.16700 Y8.15442
G01 X40.09395 Y8.19339
G01 X40.07162 Y8.20395
G01 X39.93807 Y8.21053
G01 X39.85590 Y8.21053
G01 X39.69908 Y8.20281
G01 X39.61478 Y8.19448
G01 X39.45796 Y8.17124
G01 X39.36642 Y8.15298
G01 X39.34958 Y8.14876
G01 X39.34902 Y8.14746
G01 X39.32994 Y8.10352
G01 X39.27409 Y7.99306
G01 X39.23416 Y7.92527
G01 X39.18461 Y7.85209
G01 X39.16601 Y7.82816
G01 X39.13830 Y7.79489
G01 X39.10429 Y7.75686
G01 X39.09873 Y7.75056
G01 X39.02862 Y7.66989
G01 X38.99898 Y7.62953
G01 X38.96645 Y7.58028
G01 X38.92301 Y7.50693
G01 X38.88275 Y7.44721
G01 X38.85098 Y7.40553
G01 X38.84348 Y7.39552
G01 X38.82738 Y7.37358
G01 X38.73139 Y7.26563
G01 X38.65679 Y7.19502
G01 X38.62697 Y7.16769
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.34958 Y8.14876 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.34958 Y8.14876
G01 X39.04808 Y8.30456
G01 X39.01059 Y8.31460
G01 X38.99698 Y8.31808
G01 X38.92560 Y8.33555
G01 X38.84620 Y8.36789
G01 X38.78372 Y8.41584
G01 X38.73584 Y8.47825
G01 X38.70569 Y8.55099
G01 X38.69705 Y8.60926
G01 X38.69672 Y8.62902
G01 X38.69672 Y10.42902
G01 X38.69705 Y10.44870
G01 X38.70571 Y10.50707
G01 X38.73581 Y10.57979
G01 X38.78374 Y10.64225
G01 X38.84620 Y10.69018
G01 X38.91895 Y10.72031
G01 X38.97716 Y10.72894
G01 X38.99698 Y10.72927
G01 X40.79700 Y10.72927
G01 X40.81666 Y10.72894
G01 X40.87503 Y10.72028
G01 X40.94775 Y10.69018
G01 X41.01018 Y10.64228
G01 X41.05814 Y10.57979
G01 X41.08823 Y10.50710
G01 X41.09690 Y10.44870
G01 X41.09723 Y10.42902
G01 X41.09723 Y9.33875
G01 X41.10911 Y9.21929
G01 X41.11285 Y9.20052
G01 X41.12346 Y9.18465
G01 X41.19951 Y9.09179
G01 X42.09473 Y8.19656
G01 X42.18760 Y8.12049
G01 X42.21937 Y8.09926
G01 X42.22580 Y8.09501
G01 X42.24993 Y8.09263
G01 X42.34167 Y8.09031
G01 X42.40746 Y8.09354
G01 X42.46654 Y8.09354
G01 X42.52783 Y8.09054
G01 X42.62257 Y8.07797
G01 X42.68061 Y8.06735
G01 X42.70721 Y8.06113
G01 X42.83052 Y8.02128
G01 X42.87957 Y8.00304
G01 X42.88567 Y7.99981
G01 X43.02377 Y7.92554
G01 X43.03974 Y7.91663
G01 X43.07261 Y7.89214
G01 X43.18272 Y7.80413
G01 X43.19428 Y7.79321
G01 X43.23522 Y7.75056
G01 X43.25772 Y7.72466
G01 X43.28163 Y7.69717
G01 X43.34289 Y7.63604
G01 X43.35897 Y7.62209
G01 X43.38447 Y7.59877
G01 X43.39074 Y7.59273
G01 X43.52778 Y7.48816
G01 X43.61678 Y7.43383
G01 X43.65419 Y7.41206
G01 X43.68693 Y7.30408
G01 X43.68876 Y7.29176
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.68696 Y7.42054 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.68696 Y7.42054
G01 X43.66087 Y7.41356
G01 X43.65371 Y7.41234
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.16697 Y6.77843 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.16697 Y6.77843
G01 X41.18346 Y6.69570
G01 X41.22898 Y6.54561
G01 X41.26573 Y6.45689
G01 X41.33967 Y6.31856
G01 X41.39303 Y6.23871
G01 X41.49253 Y6.11747
G01 X41.56045 Y6.04955
G01 X41.68168 Y5.95006
G01 X41.76154 Y5.89669
G01 X41.89987 Y5.82276
G01 X41.98859 Y5.78600
G01 X42.13868 Y5.74048
G01 X42.23289 Y5.72174
G01 X42.38897 Y5.70637
G01 X42.48501 Y5.70637
G01 X42.64109 Y5.72174
G01 X42.73530 Y5.74048
G01 X42.88539 Y5.78600
G01 X42.97411 Y5.82276
G01 X43.11244 Y5.89669
G01 X43.19229 Y5.95006
G01 X43.28274 Y6.02428
G01 X43.31353 Y6.04955
G01 X43.38145 Y6.11747
G01 X43.48094 Y6.23871
G01 X43.53431 Y6.31856
G01 X43.60824 Y6.45689
G01 X43.64500 Y6.54561
G01 X43.68693 Y6.68392
G01 X43.68876 Y6.69629
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.34651 Y11.44154 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.34651 Y11.44154
G01 X50.32464 Y11.44814
G01 X50.25560 Y11.41124
G01 X50.21298 Y11.37624
G01 X50.18133 Y11.35030
G01 X50.12040 Y11.27603
G01 X50.07514 Y11.19132
G01 X50.06078 Y11.15668
G01 X50.03290 Y11.06476
G01 X50.02347 Y10.96915
G01 X50.02347 Y5.29604
G01 X50.03290 Y5.20046
G01 X50.06078 Y5.10853
G01 X50.07514 Y5.07389
G01 X50.12040 Y4.98918
G01 X50.18133 Y4.91491
G01 X50.21298 Y4.88897
G01 X50.25560 Y4.85397
G01 X50.34031 Y4.80871
G01 X50.37496 Y4.79436
G01 X50.46688 Y4.76647
G01 X50.56249 Y4.75705
G01 X50.64252 Y4.75705
G01 X50.77483 Y4.81186
G01 X50.80846 Y4.82502
G01 X50.81649 Y4.82799
G01 X50.88280 Y4.84948
G01 X50.89086 Y4.85171
G01 X50.92238 Y4.85984
G01 X51.18857 Y4.92268
G01 X51.22581 Y4.93033
G01 X51.23736 Y4.93236
G01 X51.30892 Y4.94074
G01 X51.32050 Y4.94140
G01 X51.35603 Y4.94244
G01 X51.71313 Y4.94244
G01 X51.74874 Y4.94140
G01 X51.76030 Y4.94071
G01 X51.83177 Y4.93236
G01 X51.84333 Y4.93033
G01 X51.88057 Y4.92268
G01 X52.14676 Y4.85984
G01 X52.17828 Y4.85171
G01 X52.18633 Y4.84948
G01 X52.25265 Y4.82799
G01 X52.26068 Y4.82502
G01 X52.29431 Y4.81186
G01 X52.42662 Y4.75705
G01 X52.45212 Y4.73155
G01 X52.47884 Y4.70259
G01 X52.48405 Y4.69649
G01 X52.52072 Y4.64562
G01 X52.67991 Y4.75705
G01 X53.15626 Y4.90721
G01 X53.18918 Y4.91671
G01 X53.19898 Y4.91928
G01 X53.26192 Y4.93254
G01 X53.27173 Y4.93409
G01 X53.33167 Y4.94071
G01 X53.34147 Y4.94130
G01 X53.40243 Y4.94198
G01 X53.41224 Y4.94160
G01 X53.47239 Y4.93630
G01 X53.48216 Y4.93495
G01 X53.54404 Y4.92332
G01 X53.55384 Y4.92098
G01 X53.62019 Y4.90160
G01 X53.62999 Y4.89820
G01 X53.67289 Y4.88186
G01 X53.68359 Y4.85456
G01 X53.68722 Y4.84475
G01 X53.70825 Y4.77821
G01 X53.71082 Y4.76840
G01 X53.72405 Y4.70556
G01 X53.72560 Y4.69576
G01 X53.73220 Y4.63589
G01 X53.73281 Y4.62609
G01 X53.73347 Y4.56525
G01 X53.73309 Y4.55545
G01 X53.72781 Y4.49538
G01 X53.72646 Y4.48560
G01 X53.71483 Y4.42380
G01 X53.71252 Y4.41402
G01 X53.69314 Y4.34778
G01 X53.68976 Y4.33797
G01 X53.66113 Y4.26698
G01 X53.65664 Y4.25718
G01 X53.63794 Y4.21905
G01 X53.54805 Y4.04643
G01 X53.18539 Y3.79258
G01 X53.05207 Y3.69924
G01 X53.37983 Y3.69924
G01 X53.42783 Y3.69688
G01 X53.43759 Y3.69594
G01 X53.53182 Y3.67719
G01 X53.54119 Y3.67435
G01 X53.54808 Y3.67150
G01 X53.60386 Y3.58827
G01 X53.60972 Y3.57849
G01 X53.65247 Y3.49871
G01 X53.65709 Y3.48890
G01 X53.68663 Y3.41781
G01 X53.69014 Y3.40800
G01 X53.71033 Y3.34171
G01 X53.71280 Y3.33193
G01 X53.72529 Y3.26924
G01 X53.72674 Y3.25944
G01 X53.73271 Y3.19901
G01 X53.73319 Y3.18918
G01 X53.73319 Y3.12921
G01 X53.73271 Y3.11943
G01 X53.72674 Y3.05908
G01 X53.72529 Y3.04928
G01 X53.71280 Y2.98659
G01 X53.71033 Y2.97681
G01 X53.69014 Y2.91052
G01 X53.68663 Y2.90071
G01 X53.65709 Y2.82962
G01 X53.65247 Y2.81981
G01 X53.60972 Y2.74003
G01 X53.60386 Y2.73025
G01 X53.54808 Y2.64699
G01 X53.54119 Y2.64415
G01 X53.53182 Y2.64130
G01 X53.43759 Y2.62256
G01 X53.42783 Y2.62162
G01 X53.37983 Y2.61926
G01 X50.87983 Y2.61926
G01 X50.83180 Y2.62162
G01 X50.82205 Y2.62256
G01 X50.72781 Y2.64130
G01 X50.71844 Y2.64415
G01 X50.62969 Y2.68090
G01 X50.62106 Y2.68553
G01 X50.54120 Y2.73889
G01 X50.53361 Y2.74511
G01 X50.46569 Y2.81303
G01 X50.45946 Y2.82063
G01 X50.40610 Y2.90049
G01 X50.40147 Y2.90912
G01 X50.36472 Y2.99787
G01 X50.36188 Y3.00724
G01 X50.34313 Y3.10148
G01 X50.34219 Y3.11123
G01 X50.33983 Y3.15924
G01 X50.33983 Y4.11163
G01 X50.34311 Y4.16833
G01 X50.34445 Y4.17981
G01 X50.37049 Y4.29012
G01 X50.37442 Y4.30099
G01 X50.39685 Y4.35316
G01 X50.51590 Y4.59124
G01 X50.53490 Y4.62573
G01 X50.53907 Y4.63261
G01 X50.58512 Y4.69649
G01 X50.59032 Y4.70259
G01 X50.61704 Y4.73155
G01 X50.64252 Y4.75705
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X51.41981 Y3.69924 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X51.41981 Y3.69924
G01 X51.41981 Y3.98415
G01 X51.44105 Y4.02659
G01 X51.48349 Y4.04783
G01 X51.58567 Y4.04783
G01 X51.62812 Y4.02659
G01 X51.64935 Y3.98415
G01 X51.64935 Y3.69924
G01 X51.41981 Y3.69924
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X52.42662 Y4.75705 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X52.42662 Y4.75705
G01 X52.67991 Y4.75705
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X59.89780 Y11.33247 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X59.89780 Y11.33247
G01 X60.04215 Y11.36227
G01 X60.06894 Y11.39491
G01 X60.12231 Y11.47476
G01 X60.19622 Y11.61309
G01 X60.23300 Y11.70181
G01 X60.27852 Y11.85190
G01 X60.29726 Y11.94611
G01 X60.31263 Y12.10219
G01 X60.31263 Y12.19823
G01 X60.29726 Y12.35431
G01 X60.27852 Y12.44852
G01 X60.23300 Y12.59861
G01 X60.19622 Y12.68733
G01 X60.12231 Y12.82566
G01 X60.06894 Y12.90552
G01 X60.04385 Y12.93605
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.86752 Y14.79005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.86752 Y14.79005
G01 X61.84204 Y14.76455
G01 X61.81532 Y14.73559
G01 X61.81011 Y14.72949
G01 X61.76406 Y14.66561
G01 X61.75990 Y14.65873
G01 X61.74090 Y14.62424
G01 X61.62185 Y14.38616
G01 X61.59942 Y14.33399
G01 X61.59548 Y14.32312
G01 X61.56945 Y14.21281
G01 X61.56810 Y14.20133
G01 X61.56483 Y14.14463
G01 X61.56483 Y13.19223
G01 X61.56719 Y13.14423
G01 X61.56813 Y13.13448
G01 X61.58687 Y13.04024
G01 X61.58972 Y13.03087
G01 X61.62647 Y12.94212
G01 X61.63109 Y12.93349
G01 X61.68446 Y12.85363
G01 X61.69068 Y12.84603
G01 X61.75860 Y12.77811
G01 X61.76620 Y12.77189
G01 X61.84605 Y12.71853
G01 X61.85469 Y12.71390
G01 X61.94344 Y12.67715
G01 X61.95281 Y12.67430
G01 X62.04704 Y12.65556
G01 X62.05680 Y12.65462
G01 X62.10483 Y12.65226
G01 X64.60482 Y12.65226
G01 X64.65283 Y12.65462
G01 X64.66258 Y12.65556
G01 X64.75682 Y12.67430
G01 X64.76619 Y12.67715
G01 X64.77028 Y12.67882
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X64.82796 Y13.61962 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X64.82796 Y13.61962
G01 X64.77031 Y13.70562
G01 X64.76914 Y13.70740
G01 X64.76952 Y14.07953
G01 X64.77010 Y14.66417
G01 X64.64422 Y14.79005
G01 X63.65161 Y14.79005
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X62.64481 Y13.73224 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X62.64481 Y13.73224
G01 X62.64481 Y14.01715
G01 X62.66604 Y14.05959
G01 X62.70849 Y14.08083
G01 X62.81067 Y14.08083
G01 X62.85311 Y14.05959
G01 X62.87435 Y14.01715
G01 X62.87435 Y13.73224
G01 X62.64481 Y13.73224
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.54805 Y4.04643 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.54805 Y4.04643
G01 X53.54808 Y3.67150
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X53.54808 Y2.64699 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X53.54808 Y2.64699
G01 X53.54808 Y2.56670
G01 X53.55750 Y2.47112
G01 X53.58539 Y2.37920
G01 X53.59974 Y2.34456
G01 X53.64500 Y2.25985
G01 X53.67998 Y2.21723
G01 X53.70594 Y2.18558
G01 X53.78021 Y2.12464
G01 X53.86492 Y2.07938
G01 X53.89956 Y2.06503
G01 X53.99149 Y2.03714
G01 X54.08709 Y2.02772
G01 X59.76948 Y2.02772
G01 X59.86506 Y2.03714
G01 X59.95698 Y2.06503
G01 X59.99163 Y2.07938
G01 X60.07628 Y2.12462
G01 X60.15048 Y2.18548
G01 X60.21141 Y2.25964
G01 X60.25670 Y2.34428
G01 X60.27108 Y2.37892
G01 X60.29904 Y2.47097
G01 X60.30849 Y2.56670
G01 X60.30849 Y10.90496
G01 X60.29343 Y11.02551
G01 X60.28751 Y11.04883
G01 X60.25121 Y11.14667
G01 X60.19505 Y11.23458
G01 X60.12152 Y11.30862
G01 X60.09241 Y11.33227
G01 X60.04588 Y11.36303
G01 X59.89780 Y11.33247
G01 X59.81761 Y11.30804
G01 X59.74916 Y11.28345
G01 X59.71301 Y11.26836
G01 X59.66544 Y11.24626
G01 X59.61179 Y11.21863
G01 X59.60242 Y11.21368
G01 X59.47362 Y11.14441
G01 X59.46757 Y11.14121
G01 X59.41853 Y11.12297
G01 X59.29521 Y11.08312
G01 X59.26861 Y11.07690
G01 X59.21058 Y11.06628
G01 X59.11583 Y11.05371
G01 X59.05449 Y11.05071
G01 X58.99541 Y11.05071
G01 X58.93412 Y11.05371
G01 X58.83938 Y11.06628
G01 X58.78134 Y11.07690
G01 X58.75472 Y11.08312
G01 X58.63143 Y11.12297
G01 X58.58238 Y11.14121
G01 X58.57629 Y11.14444
G01 X58.43819 Y11.21871
G01 X58.42221 Y11.22762
G01 X58.38934 Y11.25211
G01 X58.27710 Y11.34182
G01 X58.26719 Y11.35048
G01 X58.22168 Y11.38952
G01 X58.18645 Y11.41761
G01 X58.15538 Y11.44065
G01 X58.12292 Y11.46331
G01 X57.96036 Y11.46603
G01 X57.90832 Y11.43461
G01 X57.87652 Y11.41335
G01 X57.78358 Y11.33725
G01 X57.56951 Y11.12318
G01 X57.49343 Y11.03031
G01 X57.48282 Y11.01441
G01 X57.47908 Y10.99567
G01 X57.46722 Y10.87624
G01 X57.46722 Y8.33123
G01 X57.47540 Y8.23197
G01 X57.48061 Y8.20047
G01 X57.52511 Y8.04739
G01 X57.61365 Y8.01726
G01 X57.65117 Y8.00723
G01 X57.71695 Y7.99326
G01 X57.77085 Y7.98480
G01 X57.79501 Y7.98051
G01 X57.86773 Y7.95039
G01 X57.93019 Y7.90246
G01 X57.97812 Y7.84000
G01 X58.00824 Y7.76725
G01 X58.01690 Y7.70891
G01 X58.01723 Y7.68922
G01 X58.01723 Y5.88923
G01 X58.01690 Y5.86954
G01 X58.00824 Y5.81120
G01 X57.97812 Y5.73845
G01 X57.93019 Y5.67599
G01 X57.86773 Y5.62806
G01 X57.79503 Y5.59797
G01 X57.73666 Y5.58930
G01 X57.71695 Y5.58897
G01 X55.91698 Y5.58897
G01 X55.89730 Y5.58930
G01 X55.83890 Y5.59797
G01 X55.76621 Y5.62806
G01 X55.70378 Y5.67599
G01 X55.65582 Y5.73845
G01 X55.62570 Y5.81120
G01 X55.61703 Y5.86959
G01 X55.61670 Y5.88923
G01 X55.61670 Y7.68922
G01 X55.61703 Y7.70886
G01 X55.62570 Y7.76725
G01 X55.65582 Y7.84000
G01 X55.70378 Y7.90246
G01 X55.76621 Y7.95039
G01 X55.83890 Y7.98049
G01 X55.86308 Y7.98480
G01 X55.91698 Y7.99324
G01 X55.96217 Y8.00205
G01 X55.99364 Y8.00939
G01 X56.10898 Y8.04721
G01 X56.14739 Y8.17429
G01 X56.15483 Y8.21178
G01 X56.16672 Y8.33123
G01 X56.16672 Y11.29021
G01 X56.16745 Y11.31975
G01 X56.16913 Y11.35404
G01 X56.17418 Y11.38805
G01 X56.18566 Y11.44588
G01 X56.19402 Y11.47921
G01 X56.20558 Y11.51154
G01 X56.22816 Y11.56603
G01 X56.23687 Y11.58444
G01 X56.24287 Y11.59709
G01 X56.26049 Y11.62653
G01 X56.29331 Y11.67565
G01 X56.31376 Y11.70321
G01 X56.33685 Y11.72869
G01 X56.35717 Y11.75002
G01 X57.21718 Y12.61002
G01 X57.23852 Y12.63034
G01 X57.26400 Y12.65345
G01 X57.29155 Y12.67387
G01 X57.34065 Y12.70669
G01 X57.37009 Y12.72434
G01 X57.40116 Y12.73902
G01 X57.44876 Y12.75906
G01 X57.45566 Y12.76160
G01 X57.48797 Y12.77316
G01 X57.50443 Y12.77728
G01 X57.52132 Y12.78152
G01 X57.57916 Y12.79302
G01 X57.61320 Y12.79808
G01 X57.64746 Y12.79975
G01 X57.67700 Y12.80049
G01 X57.98068 Y12.80049
G01 X58.10933 Y12.81510
G01 X58.13108 Y12.81987
G01 X58.14385 Y12.82978
G01 X58.22671 Y12.90679
G01 X58.23224 Y12.91299
G01 X58.26765 Y12.94941
G01 X58.27047 Y12.95208
G01 X58.27921 Y12.96031
G01 X58.38934 Y13.04834
G01 X58.42219 Y13.07283
G01 X58.43819 Y13.08175
G01 X58.57629 Y13.15601
G01 X58.58238 Y13.15924
G01 X58.63143 Y13.17748
G01 X58.75475 Y13.21733
G01 X58.78134 Y13.22355
G01 X58.82102 Y13.23145
G01 X58.83938 Y13.23417
G01 X58.93412 Y13.24674
G01 X58.99541 Y13.24974
G01 X59.05449 Y13.24974
G01 X59.11583 Y13.24674
G01 X59.21058 Y13.23417
G01 X59.26861 Y13.22355
G01 X59.29521 Y13.21733
G01 X59.41853 Y13.17748
G01 X59.46757 Y13.15924
G01 X59.47362 Y13.15604
G01 X59.60242 Y13.08677
G01 X59.61179 Y13.08182
G01 X59.66544 Y13.05419
G01 X59.67019 Y13.05177
G01 X59.69219 Y13.04067
G01 X59.81746 Y12.99224
G01 X59.89912 Y12.96907
G01 X59.92912 Y12.96107
G01 X59.97440 Y12.94974
G01 X60.04385 Y12.93605
G01 X60.07628 Y12.95337
G01 X60.11898 Y12.98837
G01 X60.15048 Y13.01423
G01 X60.21141 Y13.08840
G01 X60.25670 Y13.17303
G01 X60.27108 Y13.20768
G01 X60.29904 Y13.29973
G01 X60.30849 Y13.39546
G01 X60.30849 Y27.66897
G01 X60.29343 Y27.78951
G01 X60.28751 Y27.81283
G01 X60.25121 Y27.91067
G01 X60.19505 Y27.99858
G01 X60.12152 Y28.07262
G01 X60.09241 Y28.09627
G01 X60.04588 Y28.12703
G01 X59.89780 Y28.09647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.59228 Y30.83106 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.59228 Y30.83106
G01 X61.58299 Y30.83309
G01 X61.58090 Y30.83358
G01 X61.53267 Y30.90576
G01 X61.48700 Y30.99123
G01 X61.45873 Y31.04409
G01 X61.42198 Y31.13281
G01 X61.37646 Y31.28290
G01 X61.35771 Y31.37711
G01 X61.34235 Y31.53319
G01 X61.34235 Y31.62923
G01 X61.35771 Y31.78531
G01 X61.37646 Y31.87952
G01 X61.42198 Y32.02961
G01 X61.45873 Y32.11833
G01 X61.48700 Y32.17119
G01 X61.53267 Y32.25666
G01 X61.58037 Y32.32806
G01 X61.58088 Y32.32816
G01 X61.59327 Y32.33058
G01 X61.77626 Y32.38328
G01 X61.84712 Y32.41155
G01 X61.85741 Y32.41574
G01 X61.89355 Y32.43083
G01 X61.99208 Y32.48211
G01 X62.00425 Y32.48989
G01 X62.04318 Y32.51274
G01 X62.18128 Y32.58701
G01 X62.18738 Y32.59024
G01 X62.23643 Y32.60848
G01 X62.35974 Y32.64833
G01 X62.38634 Y32.65455
G01 X62.42601 Y32.66245
G01 X62.44438 Y32.66517
G01 X62.53912 Y32.67774
G01 X62.60046 Y32.68074
G01 X62.65954 Y32.68074
G01 X62.72083 Y32.67774
G01 X62.81557 Y32.66517
G01 X62.87361 Y32.65455
G01 X62.90021 Y32.64833
G01 X63.02352 Y32.60848
G01 X63.07257 Y32.59024
G01 X63.07867 Y32.58701
G01 X63.21677 Y32.51274
G01 X63.23274 Y32.50383
G01 X63.26561 Y32.47934
G01 X63.37572 Y32.39133
G01 X63.38728 Y32.38041
G01 X63.42822 Y32.33776
G01 X63.49835 Y32.25709
G01 X63.52797 Y32.21673
G01 X63.56050 Y32.16748
G01 X63.59759 Y32.10487
G01 X63.63437 Y32.02915
G01 X63.65751 Y31.97485
G01 X63.67092 Y31.93858
G01 X63.70259 Y31.82463
G01 X63.71562 Y31.76698
G01 X63.71641 Y31.76253
G01 X63.73015 Y31.61082
G01 X63.73211 Y31.58120
G01 X63.73167 Y31.57231
G01 X63.73104 Y31.56070
G01 X63.73079 Y31.55666
G01 X63.73045 Y31.55158
G01 X63.73589 Y31.42281
G01 X63.73716 Y31.42093
G01 X63.75842 Y31.38913
G01 X63.83437 Y31.29644
G01 X63.97877 Y31.15202
G01 X63.99909 Y31.13068
G01 X64.02220 Y31.10520
G01 X64.04262 Y31.07765
G01 X64.07544 Y31.02855
G01 X64.09309 Y30.99908
G01 X64.10777 Y30.96804
G01 X64.13035 Y30.91354
G01 X64.14191 Y30.88120
G01 X64.15027 Y30.84788
G01 X64.16177 Y30.79004
G01 X64.16683 Y30.75603
G01 X64.16850 Y30.72174
G01 X64.16924 Y30.69220
G01 X64.16924 Y29.51064
G01 X64.17737 Y29.41171
G01 X64.18257 Y29.38021
G01 X64.22520 Y29.23145
G01 X64.31740 Y29.19975
G01 X64.35491 Y29.18969
G01 X64.36899 Y29.18608
G01 X64.38572 Y29.18199
G01 X64.53096 Y28.87521
G01 X64.53096 Y27.17521
G01 X64.39251 Y26.87570
G01 X64.38862 Y26.87529
G01 X64.36899 Y26.87496
G01 X62.66899 Y26.87496
G01 X62.64933 Y26.87529
G01 X62.59093 Y26.88395
G01 X62.51819 Y26.91410
G01 X62.45576 Y26.96201
G01 X62.40785 Y27.02444
G01 X62.37770 Y27.09719
G01 X62.36904 Y27.15558
G01 X62.36871 Y27.17521
G01 X62.36871 Y28.87521
G01 X62.36904 Y28.89487
G01 X62.37770 Y28.95327
G01 X62.40785 Y29.02601
G01 X62.45576 Y29.08844
G01 X62.51819 Y29.13635
G01 X62.59734 Y29.16863
G01 X62.66287 Y29.18461
G01 X62.66899 Y29.18606
G01 X62.69434 Y29.19197
G01 X62.81285 Y29.23134
G01 X62.84938 Y29.35370
G01 X62.85685 Y29.39121
G01 X62.86873 Y29.51064
G01 X62.86873 Y30.13172
G01 X62.85685 Y30.25118
G01 X62.84938 Y30.28870
G01 X62.81666 Y30.40132
G01 X62.77610 Y30.44089
G01 X62.67704 Y30.46312
G01 X62.66114 Y30.46548
G01 X62.63894 Y30.46916
G01 X62.59993 Y30.47633
G01 X62.54618 Y30.48379
G01 X62.44438 Y30.49728
G01 X62.38634 Y30.50790
G01 X62.35974 Y30.51412
G01 X62.23643 Y30.55397
G01 X62.18738 Y30.57221
G01 X62.18128 Y30.57544
G01 X62.04318 Y30.64971
G01 X62.00425 Y30.67257
G01 X61.99208 Y30.68034
G01 X61.93711 Y30.71161
G01 X61.91512 Y30.72271
G01 X61.84809 Y30.75209
G01 X61.77628 Y30.77917
G01 X61.67059 Y30.81196
G01 X61.62530 Y30.82331
G01 X61.59228 Y30.83106
G01 X61.58301 Y30.83312
G01 X61.58299 Y30.83309
G01 X61.52960 Y30.80457
G01 X61.48700 Y30.76959
G01 X61.45533 Y30.74363
G01 X61.39439 Y30.66937
G01 X61.34913 Y30.58466
G01 X61.33478 Y30.55001
G01 X61.30689 Y30.45809
G01 X61.29747 Y30.36248
G01 X61.29747 Y20.60794
G01 X61.31253 Y20.48742
G01 X61.31845 Y20.46410
G01 X61.35474 Y20.36626
G01 X61.41090 Y20.27835
G01 X61.48443 Y20.20431
G01 X61.51354 Y20.18066
G01 X61.58088 Y20.13616
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X61.59228 Y18.63906 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X61.59228 Y18.63906
G01 X61.58299 Y18.64109
G01 X61.58090 Y18.64158
G01 X61.53267 Y18.71376
G01 X61.48700 Y18.79923
G01 X61.45873 Y18.85209
G01 X61.42198 Y18.94081
G01 X61.37646 Y19.09090
G01 X61.35771 Y19.18511
G01 X61.34235 Y19.34119
G01 X61.34235 Y19.43723
G01 X61.35771 Y19.59331
G01 X61.37646 Y19.68752
G01 X61.42198 Y19.83761
G01 X61.45873 Y19.92633
G01 X61.48700 Y19.97919
G01 X61.53267 Y20.06466
G01 X61.58037 Y20.13606
G01 X61.58088 Y20.13616
G01 X61.59327 Y20.13858
G01 X61.77626 Y20.19128
G01 X61.84712 Y20.21955
G01 X61.85741 Y20.22374
G01 X61.89355 Y20.23883
G01 X61.99208 Y20.29011
G01 X62.00425 Y20.29789
G01 X62.04318 Y20.32074
G01 X62.18128 Y20.39501
G01 X62.18738 Y20.39824
G01 X62.23643 Y20.41648
G01 X62.35974 Y20.45633
G01 X62.38634 Y20.46255
G01 X62.42601 Y20.47045
G01 X62.44438 Y20.47317
G01 X62.54615 Y20.48666
G01 X62.59993 Y20.49413
G01 X62.63894 Y20.50129
G01 X62.66114 Y20.50497
G01 X62.67704 Y20.50733
G01 X62.77610 Y20.52956
G01 X62.81666 Y20.56913
G01 X62.84938 Y20.68176
G01 X62.85685 Y20.71927
G01 X62.86873 Y20.83870
G01 X62.86873 Y21.82298
G01 X62.86843 Y21.84182
G01 X62.86823 Y21.84789
G01 X62.84793 Y21.98640
G01 X62.84387 Y21.99118
G01 X62.82246 Y22.01660
G01 X62.73947 Y22.09821
G01 X62.72632 Y22.11063
G01 X62.68532 Y22.15335
G01 X62.61118 Y22.23867
G01 X62.57940 Y22.28198
G01 X62.54692 Y22.33116
G01 X62.50742 Y22.39780
G01 X62.46841 Y22.47812
G01 X62.44524 Y22.53248
G01 X62.43076 Y22.57164
G01 X62.39729 Y22.69204
G01 X62.38425 Y22.74975
G01 X62.38321 Y22.75572
G01 X62.36871 Y22.91563
G01 X62.36675 Y22.94523
G01 X62.36871 Y22.97479
G01 X62.38321 Y23.13476
G01 X62.38425 Y23.14070
G01 X62.39729 Y23.19841
G01 X62.43076 Y23.31881
G01 X62.44524 Y23.35798
G01 X62.46841 Y23.41233
G01 X62.50742 Y23.49265
G01 X62.54692 Y23.55930
G01 X62.57940 Y23.60847
G01 X62.61118 Y23.65178
G01 X62.68532 Y23.73710
G01 X62.72632 Y23.77982
G01 X62.73935 Y23.79214
G01 X62.85558 Y23.88500
G01 X62.88883 Y23.90974
G01 X62.90432 Y23.91838
G01 X63.05106 Y23.99732
G01 X63.05626 Y24.00006
G01 X63.10628 Y24.01873
G01 X63.23648 Y24.06079
G01 X63.26558 Y24.06763
G01 X63.30597 Y24.07563
G01 X63.32367 Y24.07824
G01 X63.42400 Y24.09153
G01 X63.48949 Y24.09475
G01 X63.54849 Y24.09475
G01 X63.61395 Y24.09153
G01 X63.71428 Y24.07824
G01 X63.76736 Y24.06877
G01 X63.77236 Y24.06763
G01 X63.80142 Y24.06082
G01 X63.93167 Y24.01873
G01 X63.98169 Y24.00006
G01 X63.98689 Y23.99729
G01 X64.13363 Y23.91838
G01 X64.14912 Y23.90974
G01 X64.18237 Y23.88500
G01 X64.29860 Y23.79211
G01 X64.31163 Y23.77982
G01 X64.35263 Y23.73710
G01 X64.39047 Y23.69353
G01 X64.42946 Y23.58459
G01 X64.44468 Y23.53453
G01 X64.48644 Y23.36791
G01 X64.49436 Y23.32816
G01 X64.51907 Y23.16153
G01 X64.52240 Y23.12778
G01 X64.53058 Y22.96113
G01 X64.53058 Y22.92930
G01 X64.52240 Y22.76268
G01 X64.51907 Y22.72892
G01 X64.49436 Y22.56229
G01 X64.48644 Y22.52254
G01 X64.44468 Y22.35592
G01 X64.42946 Y22.30586
G01 X64.39047 Y22.19692
G01 X64.35263 Y22.15335
G01 X64.31163 Y22.11063
G01 X64.29848 Y22.09821
G01 X64.28687 Y22.08853
G01 X64.28224 Y22.08460
G01 X64.19380 Y21.99153
G01 X64.18989 Y21.98648
G01 X64.18857 Y21.97995
G01 X64.18110 Y21.94243
G01 X64.16924 Y21.82298
G01 X64.16924 Y20.27820
G01 X64.16850 Y20.24869
G01 X64.16683 Y20.21442
G01 X64.16177 Y20.18041
G01 X64.15027 Y20.12257
G01 X64.14193 Y20.08927
G01 X64.13035 Y20.05692
G01 X64.12565 Y20.04429
G01 X64.10777 Y20.00241
G01 X64.09309 Y19.97134
G01 X64.07544 Y19.94190
G01 X64.04262 Y19.89281
G01 X64.02220 Y19.86525
G01 X63.99909 Y19.83977
G01 X63.97877 Y19.81843
G01 X63.83434 Y19.67398
G01 X63.82586 Y19.66535
G01 X63.82309 Y19.66245
G01 X63.74120 Y19.55585
G01 X63.73614 Y19.54757
G01 X63.73310 Y19.51904
G01 X63.73051 Y19.41884
G01 X63.73167 Y19.39817
G01 X63.73211 Y19.38923
G01 X63.73015 Y19.35961
G01 X63.71641 Y19.20792
G01 X63.71562 Y19.20348
G01 X63.70259 Y19.14582
G01 X63.67092 Y19.03187
G01 X63.65751 Y18.99560
G01 X63.63437 Y18.94130
G01 X63.59759 Y18.86558
G01 X63.56050 Y18.80297
G01 X63.52797 Y18.75372
G01 X63.49835 Y18.71336
G01 X63.42822 Y18.63269
G01 X63.38728 Y18.59004
G01 X63.37572 Y18.57912
G01 X63.26561 Y18.49111
G01 X63.23274 Y18.46662
G01 X63.21677 Y18.45771
G01 X63.07867 Y18.38344
G01 X63.07257 Y18.38021
G01 X63.02352 Y18.36197
G01 X62.90021 Y18.32212
G01 X62.87361 Y18.31590
G01 X62.81557 Y18.30528
G01 X62.72083 Y18.29271
G01 X62.65954 Y18.28971
G01 X62.60046 Y18.28971
G01 X62.53912 Y18.29271
G01 X62.44438 Y18.30528
G01 X62.38634 Y18.31590
G01 X62.35974 Y18.32212
G01 X62.23643 Y18.36197
G01 X62.18738 Y18.38021
G01 X62.18128 Y18.38344
G01 X62.04318 Y18.45771
G01 X62.00425 Y18.48057
G01 X61.99208 Y18.48834
G01 X61.93711 Y18.51961
G01 X61.91512 Y18.53071
G01 X61.84809 Y18.56009
G01 X61.77628 Y18.58717
G01 X61.67059 Y18.61996
G01 X61.62530 Y18.63131
G01 X61.59228 Y18.63906
G01 X61.58301 Y18.64112
G01 X61.58299 Y18.64109
G01 X61.52960 Y18.61257
G01 X61.48700 Y18.57759
G01 X61.45533 Y18.55164
G01 X61.39439 Y18.47737
G01 X61.34913 Y18.39266
G01 X61.33478 Y18.35801
G01 X61.30689 Y18.26609
G01 X61.29747 Y18.17048
G01 X61.29747 Y15.32904
G01 X61.30689 Y15.23346
G01 X61.33478 Y15.14153
G01 X61.34913 Y15.10689
G01 X61.39439 Y15.02218
G01 X61.45533 Y14.94791
G01 X61.48700 Y14.92195
G01 X61.52960 Y14.88697
G01 X61.61430 Y14.84171
G01 X61.64895 Y14.82736
G01 X61.74087 Y14.79947
G01 X61.83648 Y14.79005
G01 X61.86752 Y14.79005
G01 X61.99983 Y14.84486
G01 X62.03346 Y14.85802
G01 X62.04148 Y14.86099
G01 X62.10780 Y14.88248
G01 X62.11585 Y14.88471
G01 X62.14737 Y14.89284
G01 X62.41357 Y14.95568
G01 X62.45080 Y14.96333
G01 X62.46236 Y14.96536
G01 X62.53391 Y14.97374
G01 X62.54549 Y14.97440
G01 X62.58103 Y14.97544
G01 X62.93815 Y14.97544
G01 X62.97376 Y14.97440
G01 X62.98532 Y14.97371
G01 X63.05680 Y14.96536
G01 X63.06835 Y14.96333
G01 X63.10559 Y14.95568
G01 X63.37178 Y14.89284
G01 X63.40328 Y14.88471
G01 X63.41133 Y14.88248
G01 X63.47765 Y14.86099
G01 X63.48568 Y14.85802
G01 X63.51930 Y14.84486
G01 X63.65161 Y14.79005
G01 X63.67711 Y14.76455
G01 X63.70384 Y14.73559
G01 X63.70904 Y14.72949
G01 X63.75509 Y14.66561
G01 X63.75926 Y14.65873
G01 X63.77826 Y14.62424
G01 X63.89731 Y14.38616
G01 X63.91974 Y14.33399
G01 X63.92367 Y14.32312
G01 X63.94971 Y14.21281
G01 X63.95105 Y14.20133
G01 X63.95433 Y14.14463
G01 X63.95433 Y13.73224
G01 X64.60482 Y13.73224
G01 X64.65283 Y13.72988
G01 X64.66258 Y13.72894
G01 X64.75682 Y13.71019
G01 X64.76619 Y13.70735
G01 X64.77031 Y13.70562
G01 X64.77033 Y13.70562
G01 X64.82796 Y13.61962
G01 X64.83383 Y13.60981
G01 X64.87640 Y13.53039
G01 X64.88102 Y13.52058
G01 X64.91041 Y13.44982
G01 X64.91392 Y13.44001
G01 X64.93403 Y13.37402
G01 X64.93647 Y13.36422
G01 X64.94894 Y13.30184
G01 X64.95039 Y13.29203
G01 X64.95634 Y13.23188
G01 X64.95682 Y13.22205
G01 X64.95682 Y13.16236
G01 X64.95634 Y13.15256
G01 X64.95039 Y13.09249
G01 X64.94894 Y13.08268
G01 X64.93647 Y13.02030
G01 X64.93403 Y13.01050
G01 X64.91392 Y12.94451
G01 X64.91041 Y12.93470
G01 X64.88102 Y12.86394
G01 X64.87640 Y12.85414
G01 X64.83383 Y12.77471
G01 X64.82796 Y12.76491
G01 X64.77031 Y12.67885
G01 X64.77028 Y12.67882
G01 X64.76810 Y12.67557
G01 X64.76802 Y12.61185
G01 X64.76302 Y12.59531
G01 X64.75359 Y12.49970
G01 X64.76302 Y12.40412
G01 X64.79090 Y12.31220
G01 X64.80526 Y12.27756
G01 X64.85052 Y12.19285
G01 X64.88552 Y12.15020
G01 X64.91145 Y12.11858
G01 X64.98572 Y12.05764
G01 X65.07043 Y12.01238
G01 X65.10508 Y11.99803
G01 X65.19700 Y11.97014
G01 X65.29261 Y11.96072
G01 X71.04347 Y11.96072
G01 X71.13908 Y11.97014
G01 X71.23100 Y11.99803
G01 X71.26564 Y12.01238
G01 X71.35033 Y12.05764
G01 X71.42462 Y12.11858
G01 X71.48556 Y12.19285
G01 X71.53082 Y12.27756
G01 X71.54517 Y12.31220
G01 X71.57304 Y12.40412
G01 X71.58248 Y12.49970
G01 X71.58248 Y18.17048
G01 X71.56742 Y18.29103
G01 X71.56150 Y18.31435
G01 X71.52521 Y18.41219
G01 X71.46905 Y18.50010
G01 X71.39549 Y18.57414
G01 X71.36641 Y18.59779
G01 X71.29907 Y18.64229
G01 X71.28668 Y18.63987
G01 X71.10369 Y18.58717
G01 X71.03280 Y18.55890
G01 X71.02254 Y18.55471
G01 X70.98637 Y18.53962
G01 X70.88787 Y18.48834
G01 X70.87573 Y18.48057
G01 X70.83674 Y18.45771
G01 X70.75279 Y18.41254
G01 X70.69867 Y18.38344
G01 X70.69257 Y18.38021
G01 X70.64352 Y18.36197
G01 X70.52018 Y18.32212
G01 X70.49359 Y18.31590
G01 X70.43557 Y18.30528
G01 X70.34083 Y18.29271
G01 X70.27954 Y18.28971
G01 X70.22046 Y18.28971
G01 X70.15912 Y18.29271
G01 X70.06438 Y18.30528
G01 X70.00634 Y18.31590
G01 X69.97969 Y18.32212
G01 X69.85640 Y18.36197
G01 X69.80738 Y18.38021
G01 X69.80128 Y18.38344
G01 X69.66318 Y18.45771
G01 X69.64721 Y18.46662
G01 X69.61434 Y18.49111
G01 X69.59275 Y18.50835
G01 X69.51396 Y18.57132
G01 X69.49140 Y18.58852
G01 X69.44175 Y18.62451
G01 X69.43088 Y18.63225
G01 X69.40367 Y18.65113
G01 X69.34185 Y18.68948
G01 X69.26943 Y18.69029
G01 X69.17540 Y18.63774
G01 X69.14363 Y18.61651
G01 X69.05089 Y18.54054
G01 X68.99778 Y18.48745
G01 X68.95788 Y18.44346
G01 X68.94568 Y18.42860
G01 X68.84543 Y18.25920
G01 X68.84469 Y18.25735
G01 X68.84469 Y18.22171
G01 X68.87660 Y18.00889
G01 X68.95112 Y17.97340
G01 X68.98861 Y17.95786
G01 X69.03999 Y17.93889
G01 X69.11028 Y17.91605
G01 X69.19072 Y17.88339
G01 X69.25320 Y17.83546
G01 X69.30113 Y17.77300
G01 X69.33123 Y17.70030
G01 X69.33989 Y17.64193
G01 X69.34022 Y17.62222
G01 X69.34022 Y15.82223
G01 X69.33989 Y15.80252
G01 X69.33123 Y15.74415
G01 X69.30113 Y15.67145
G01 X69.25320 Y15.60899
G01 X69.19074 Y15.56106
G01 X69.11800 Y15.53097
G01 X69.05963 Y15.52230
G01 X69.03999 Y15.52197
G01 X67.24000 Y15.52197
G01 X67.22029 Y15.52230
G01 X67.16192 Y15.53097
G01 X67.08922 Y15.56106
G01 X67.02674 Y15.60899
G01 X66.97884 Y15.67148
G01 X66.94871 Y15.74417
G01 X66.94005 Y15.80254
G01 X66.93974 Y15.82223
G01 X66.93974 Y17.62222
G01 X66.94005 Y17.64191
G01 X66.94871 Y17.70028
G01 X66.97884 Y17.77297
G01 X67.02674 Y17.83546
G01 X67.08922 Y17.88339
G01 X67.16194 Y17.91351
G01 X67.18610 Y17.91780
G01 X67.24000 Y17.92626
G01 X67.28516 Y17.93505
G01 X67.31663 Y17.94239
G01 X67.43197 Y17.98024
G01 X67.47038 Y18.10726
G01 X67.47784 Y18.14478
G01 X67.48971 Y18.26421
G01 X67.48971 Y18.54922
G01 X67.49044 Y18.57876
G01 X67.49212 Y18.61293
G01 X67.49720 Y18.64706
G01 X67.49956 Y18.66177
G01 X67.50868 Y18.70490
G01 X67.51704 Y18.73822
G01 X67.52859 Y18.77056
G01 X67.55117 Y18.82507
G01 X67.56585 Y18.85608
G01 X67.58351 Y18.88554
G01 X67.61632 Y18.93464
G01 X67.63675 Y18.96220
G01 X67.65986 Y18.98768
G01 X67.68018 Y19.00904
G01 X68.52018 Y19.84902
G01 X68.54152 Y19.86934
G01 X68.56700 Y19.89245
G01 X68.59455 Y19.91287
G01 X68.64365 Y19.94569
G01 X68.67312 Y19.96334
G01 X68.70416 Y19.97802
G01 X68.75866 Y20.00060
G01 X68.79092 Y20.01214
G01 X68.82432 Y20.02052
G01 X68.85315 Y20.02699
G01 X68.88216 Y20.03202
G01 X68.91614 Y20.03708
G01 X68.95046 Y20.03875
G01 X68.98000 Y20.03947
G01 X69.19991 Y20.03947
G01 X69.20370 Y20.03949
G01 X69.20570 Y20.03949
G01 X69.33420 Y20.05407
G01 X69.35607 Y20.05887
G01 X69.36880 Y20.06873
G01 X69.45170 Y20.14579
G01 X69.45724 Y20.15199
G01 X69.49262 Y20.18841
G01 X69.49547 Y20.19108
G01 X69.50421 Y20.19931
G01 X69.61434 Y20.28734
G01 X69.64718 Y20.31183
G01 X69.66318 Y20.32074
G01 X69.80128 Y20.39501
G01 X69.80738 Y20.39824
G01 X69.85640 Y20.41648
G01 X69.97974 Y20.45633
G01 X70.00634 Y20.46255
G01 X70.04601 Y20.47045
G01 X70.06438 Y20.47317
G01 X70.15912 Y20.48574
G01 X70.22046 Y20.48874
G01 X70.27954 Y20.48874
G01 X70.34083 Y20.48574
G01 X70.43557 Y20.47317
G01 X70.49359 Y20.46255
G01 X70.52018 Y20.45633
G01 X70.64352 Y20.41648
G01 X70.69259 Y20.39824
G01 X70.69867 Y20.39501
G01 X70.83674 Y20.32074
G01 X70.87570 Y20.29789
G01 X70.88787 Y20.29011
G01 X70.94276 Y20.25890
G01 X70.96473 Y20.24780
G01 X71.03184 Y20.21836
G01 X71.10367 Y20.19128
G01 X71.20921 Y20.15854
G01 X71.25452 Y20.14719
G01 X71.28764 Y20.13939
G01 X71.29691 Y20.13733
G01 X71.29905 Y20.13687
G01 X71.34731 Y20.06466
G01 X71.39300 Y19.97919
G01 X71.42124 Y19.92633
G01 X71.45800 Y19.83761
G01 X71.50352 Y19.68752
G01 X71.52226 Y19.59331
G01 X71.53763 Y19.43723
G01 X71.53763 Y19.34119
G01 X71.52226 Y19.18511
G01 X71.50352 Y19.09090
G01 X71.45800 Y18.94081
G01 X71.42124 Y18.85209
G01 X71.39300 Y18.79923
G01 X71.34731 Y18.71376
G01 X71.29963 Y18.64241
G01 X71.29907 Y18.64229
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.29691 Y20.13733 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.29691 Y20.13733
G01 X71.35033 Y20.16588
G01 X71.42462 Y20.22682
G01 X71.48556 Y20.30109
G01 X71.53082 Y20.38579
G01 X71.54517 Y20.42044
G01 X71.57304 Y20.51236
G01 X71.58248 Y20.60794
G01 X71.58248 Y30.36248
G01 X71.56742 Y30.48303
G01 X71.56150 Y30.50635
G01 X71.52521 Y30.60419
G01 X71.46905 Y30.69210
G01 X71.39549 Y30.76614
G01 X71.36641 Y30.78979
G01 X71.29907 Y30.83429
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X71.29691 Y32.32933 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X71.29691 Y32.32933
G01 X71.29905 Y32.32887
G01 X71.34731 Y32.25666
G01 X71.39300 Y32.17119
G01 X71.42124 Y32.11833
G01 X71.45800 Y32.02961
G01 X71.50352 Y31.87952
G01 X71.52226 Y31.78531
G01 X71.53763 Y31.62923
G01 X71.53763 Y31.53319
G01 X71.52226 Y31.37711
G01 X71.50352 Y31.28290
G01 X71.45800 Y31.13281
G01 X71.42124 Y31.04409
G01 X71.39300 Y30.99123
G01 X71.34731 Y30.90576
G01 X71.29963 Y30.83441
G01 X71.29907 Y30.83429
G01 X71.28668 Y30.83187
G01 X71.10369 Y30.77917
G01 X71.03280 Y30.75090
G01 X71.02254 Y30.74671
G01 X70.98637 Y30.73162
G01 X70.88787 Y30.68034
G01 X70.87570 Y30.67257
G01 X70.83674 Y30.64971
G01 X70.69867 Y30.57544
G01 X70.69259 Y30.57221
G01 X70.64352 Y30.55397
G01 X70.52018 Y30.51412
G01 X70.49359 Y30.50790
G01 X70.43557 Y30.49728
G01 X70.34083 Y30.48471
G01 X70.27954 Y30.48171
G01 X70.22046 Y30.48171
G01 X70.15912 Y30.48471
G01 X70.06438 Y30.49728
G01 X70.00634 Y30.50790
G01 X69.97969 Y30.51412
G01 X69.85640 Y30.55397
G01 X69.80738 Y30.57221
G01 X69.80128 Y30.57544
G01 X69.66318 Y30.64971
G01 X69.64718 Y30.65862
G01 X69.61434 Y30.68311
G01 X69.50421 Y30.77109
G01 X69.49267 Y30.78204
G01 X69.45716 Y30.81854
G01 X69.45170 Y30.82466
G01 X69.44883 Y30.82784
G01 X69.44746 Y30.82933
G01 X69.35678 Y30.91130
G01 X69.35617 Y30.91176
G01 X69.31942 Y30.91907
G01 X69.19991 Y30.93096
G01 X69.05597 Y30.93096
G01 X69.02646 Y30.93170
G01 X68.99217 Y30.93337
G01 X68.95816 Y30.93843
G01 X68.90029 Y30.94993
G01 X68.86702 Y30.95826
G01 X68.83464 Y30.96985
G01 X68.78015 Y30.99243
G01 X68.74904 Y31.00713
G01 X68.71965 Y31.02476
G01 X68.67055 Y31.05758
G01 X68.64299 Y31.07800
G01 X68.61749 Y31.10111
G01 X68.59618 Y31.12143
G01 X67.68018 Y32.03743
G01 X67.65986 Y32.05877
G01 X67.63677 Y32.08425
G01 X67.61632 Y32.11181
G01 X67.58351 Y32.16090
G01 X67.56585 Y32.19037
G01 X67.55117 Y32.22141
G01 X67.52859 Y32.27592
G01 X67.51701 Y32.30827
G01 X67.50868 Y32.34157
G01 X67.49717 Y32.39941
G01 X67.49212 Y32.43342
G01 X67.49044 Y32.46769
G01 X67.48971 Y32.49720
G01 X67.48971 Y32.73324
G01 X67.48155 Y32.83225
G01 X67.47637 Y32.86375
G01 X67.43182 Y33.01706
G01 X67.34330 Y33.04719
G01 X67.30578 Y33.05722
G01 X67.24000 Y33.07119
G01 X67.18610 Y33.07965
G01 X67.16194 Y33.08394
G01 X67.08922 Y33.11406
G01 X67.02674 Y33.16199
G01 X66.97884 Y33.22448
G01 X66.94871 Y33.29717
G01 X66.94005 Y33.35554
G01 X66.93974 Y33.37520
G01 X66.93974 Y35.17525
G01 X66.94005 Y35.19491
G01 X66.94871 Y35.25328
G01 X66.97884 Y35.32597
G01 X67.02674 Y35.38846
G01 X67.08922 Y35.43639
G01 X67.16194 Y35.46651
G01 X67.22016 Y35.47515
G01 X67.24000 Y35.47548
G01 X69.03999 Y35.47548
G01 X69.05963 Y35.47515
G01 X69.11800 Y35.46649
G01 X69.19074 Y35.43639
G01 X69.25320 Y35.38846
G01 X69.30113 Y35.32600
G01 X69.33123 Y35.25330
G01 X69.33989 Y35.19493
G01 X69.34022 Y35.17525
G01 X69.34022 Y33.37520
G01 X69.33989 Y33.35552
G01 X69.33123 Y33.29715
G01 X69.30113 Y33.22445
G01 X69.25320 Y33.16199
G01 X69.19074 Y33.11406
G01 X69.14561 Y33.09410
G01 X69.08952 Y33.07193
G01 X69.07119 Y33.06502
G01 X69.03999 Y33.05379
G01 X68.88699 Y32.97820
G01 X68.88226 Y32.95613
G01 X68.87479 Y32.91864
G01 X68.86057 Y32.79570
G01 X68.93509 Y32.64904
G01 X68.95630 Y32.61727
G01 X69.03232 Y32.52443
G01 X69.09346 Y32.46329
G01 X69.17030 Y32.39829
G01 X69.19659 Y32.37952
G01 X69.34279 Y32.30035
G01 X69.42178 Y32.34488
G01 X69.43367 Y32.35260
G01 X69.45483 Y32.36581
G01 X69.48823 Y32.38580
G01 X69.55622 Y32.43294
G01 X69.61434 Y32.47937
G01 X69.64718 Y32.50383
G01 X69.66318 Y32.51274
G01 X69.80128 Y32.58701
G01 X69.80738 Y32.59024
G01 X69.85640 Y32.60848
G01 X69.97974 Y32.64833
G01 X70.00634 Y32.65455
G01 X70.04601 Y32.66245
G01 X70.06438 Y32.66517
G01 X70.15912 Y32.67774
G01 X70.22046 Y32.68074
G01 X70.27954 Y32.68074
G01 X70.34083 Y32.67774
G01 X70.43557 Y32.66517
G01 X70.49359 Y32.65455
G01 X70.52018 Y32.64833
G01 X70.64352 Y32.60848
G01 X70.69259 Y32.59024
G01 X70.69867 Y32.58701
G01 X70.83674 Y32.51274
G01 X70.87570 Y32.48989
G01 X70.88787 Y32.48211
G01 X70.94276 Y32.45090
G01 X70.96473 Y32.43980
G01 X71.03184 Y32.41036
G01 X71.10367 Y32.38328
G01 X71.20921 Y32.35054
G01 X71.25452 Y32.33919
G01 X71.28764 Y32.33139
G01 X71.29691 Y32.32933
G01 X71.35033 Y32.35788
G01 X71.42462 Y32.41882
G01 X71.48556 Y32.49309
G01 X71.53082 Y32.57779
G01 X71.54517 Y32.61244
G01 X71.57304 Y32.70436
G01 X71.58248 Y32.79994
G01 X71.58248 Y38.47072
G01 X71.57304 Y38.56635
G01 X71.54517 Y38.65825
G01 X71.53082 Y38.69290
G01 X71.48556 Y38.77760
G01 X71.42462 Y38.85187
G01 X71.35033 Y38.91281
G01 X71.26564 Y38.95807
G01 X71.23100 Y38.97242
G01 X71.13908 Y39.00034
G01 X71.04347 Y39.00973
G01 X61.83648 Y39.00973
G01 X61.74087 Y39.00034
G01 X61.64895 Y38.97242
G01 X61.61430 Y38.95807
G01 X61.52960 Y38.91281
G01 X61.45533 Y38.85187
G01 X61.39439 Y38.77760
G01 X61.34913 Y38.69290
G01 X61.33478 Y38.65825
G01 X61.30689 Y38.56635
G01 X61.29747 Y38.47072
G01 X61.29747 Y32.79994
G01 X61.31253 Y32.67942
G01 X61.31845 Y32.65610
G01 X61.35474 Y32.55826
G01 X61.41090 Y32.47035
G01 X61.48443 Y32.39631
G01 X61.51354 Y32.37266
G01 X61.58088 Y32.32816
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X60.04385 Y29.70005 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X60.04385 Y29.70005
G01 X60.06894 Y29.66952
G01 X60.12231 Y29.58966
G01 X60.19622 Y29.45133
G01 X60.23300 Y29.36261
G01 X60.27852 Y29.21252
G01 X60.29726 Y29.11831
G01 X60.31263 Y28.96223
G01 X60.31263 Y28.86619
G01 X60.29726 Y28.71011
G01 X60.27852 Y28.61590
G01 X60.23300 Y28.46581
G01 X60.19622 Y28.37709
G01 X60.12231 Y28.23876
G01 X60.06894 Y28.15891
G01 X60.04215 Y28.12627
G01 X59.89780 Y28.09647
G01 X59.81761 Y28.07204
G01 X59.74916 Y28.04745
G01 X59.71301 Y28.03236
G01 X59.66544 Y28.01026
G01 X59.61179 Y27.98263
G01 X59.60242 Y27.97768
G01 X59.47362 Y27.90841
G01 X59.46757 Y27.90521
G01 X59.41853 Y27.88697
G01 X59.29521 Y27.84712
G01 X59.26861 Y27.84090
G01 X59.21058 Y27.83028
G01 X59.11583 Y27.81771
G01 X59.05449 Y27.81471
G01 X58.99541 Y27.81471
G01 X58.93412 Y27.81771
G01 X58.83938 Y27.83028
G01 X58.78134 Y27.84090
G01 X58.75472 Y27.84712
G01 X58.63143 Y27.88697
G01 X58.58238 Y27.90521
G01 X58.57629 Y27.90844
G01 X58.43819 Y27.98271
G01 X58.42221 Y27.99162
G01 X58.38934 Y28.01611
G01 X58.31926 Y28.07211
G01 X58.27921 Y28.10412
G01 X58.26765 Y28.11504
G01 X58.23209 Y28.15159
G01 X58.22747 Y28.15677
G01 X58.22668 Y28.15766
G01 X58.22617 Y28.15825
G01 X58.13174 Y28.24435
G01 X58.13118 Y28.24476
G01 X58.09435 Y28.25210
G01 X57.97489 Y28.26396
G01 X57.75498 Y28.26396
G01 X57.72544 Y28.26470
G01 X57.69117 Y28.26637
G01 X57.65714 Y28.27143
G01 X57.62813 Y28.27646
G01 X57.59930 Y28.28293
G01 X57.58244 Y28.28718
G01 X57.56598 Y28.29129
G01 X57.53364 Y28.30285
G01 X57.47913 Y28.32543
G01 X57.44812 Y28.34011
G01 X57.41866 Y28.35776
G01 X57.36953 Y28.39058
G01 X57.34200 Y28.41100
G01 X57.31650 Y28.43411
G01 X57.29516 Y28.45443
G01 X56.35717 Y29.39246
G01 X56.33685 Y29.41379
G01 X56.31376 Y29.43924
G01 X56.29331 Y29.46683
G01 X56.26049 Y29.51593
G01 X56.24287 Y29.54536
G01 X56.22816 Y29.57643
G01 X56.20558 Y29.63094
G01 X56.20398 Y29.63538
G01 X56.19405 Y29.66322
G01 X56.18594 Y29.69550
G01 X56.18566 Y29.69660
G01 X56.17416 Y29.75443
G01 X56.16913 Y29.78842
G01 X56.16745 Y29.82271
G01 X56.16672 Y29.85222
G01 X56.16672 Y32.67421
G01 X56.15851 Y32.77348
G01 X56.15330 Y32.80497
G01 X56.10880 Y32.95808
G01 X56.02041 Y32.98816
G01 X55.98292 Y32.99819
G01 X55.91698 Y33.01221
G01 X55.86308 Y33.02067
G01 X55.83893 Y33.02496
G01 X55.76621 Y33.05509
G01 X55.70375 Y33.10302
G01 X55.65582 Y33.16547
G01 X55.62570 Y33.23819
G01 X55.61703 Y33.29659
G01 X55.61670 Y33.31622
G01 X55.61670 Y35.11622
G01 X55.61703 Y35.13585
G01 X55.62570 Y35.19425
G01 X55.65582 Y35.26699
G01 X55.70378 Y35.32945
G01 X55.76621 Y35.37738
G01 X55.83893 Y35.40751
G01 X55.89717 Y35.41614
G01 X55.91698 Y35.41647
G01 X57.71695 Y35.41647
G01 X57.73666 Y35.41614
G01 X57.79503 Y35.40748
G01 X57.86773 Y35.37738
G01 X57.93019 Y35.32945
G01 X57.97812 Y35.26699
G01 X58.00824 Y35.19427
G01 X58.01690 Y35.13590
G01 X58.01723 Y35.11622
G01 X58.01723 Y33.31622
G01 X58.01690 Y33.29654
G01 X58.00824 Y33.23819
G01 X57.97812 Y33.16547
G01 X57.93019 Y33.10302
G01 X57.86773 Y33.05509
G01 X57.79498 Y33.02496
G01 X57.77085 Y33.02067
G01 X57.71695 Y33.01221
G01 X57.67179 Y33.00340
G01 X57.64030 Y32.99606
G01 X57.52496 Y32.95824
G01 X57.48660 Y32.83139
G01 X57.47913 Y32.79387
G01 X57.46722 Y32.67421
G01 X57.46722 Y30.26622
G01 X57.47913 Y30.14658
G01 X57.48282 Y30.12804
G01 X57.49359 Y30.11196
G01 X57.56953 Y30.01928
G01 X57.82584 Y29.76297
G01 X57.90260 Y29.69802
G01 X57.92884 Y29.67927
G01 X58.04444 Y29.61313
G01 X58.11657 Y29.61455
G01 X58.15566 Y29.63820
G01 X58.18868 Y29.65964
G01 X58.21678 Y29.67894
G01 X58.26641 Y29.71493
G01 X58.28901 Y29.73216
G01 X58.38934 Y29.81234
G01 X58.42219 Y29.83683
G01 X58.43819 Y29.84574
G01 X58.57629 Y29.92001
G01 X58.58238 Y29.92324
G01 X58.63143 Y29.94148
G01 X58.75475 Y29.98133
G01 X58.78134 Y29.98755
G01 X58.82102 Y29.99545
G01 X58.83938 Y29.99817
G01 X58.93412 Y30.01074
G01 X58.99541 Y30.01374
G01 X59.05449 Y30.01374
G01 X59.11583 Y30.01074
G01 X59.21058 Y29.99817
G01 X59.26861 Y29.98755
G01 X59.29526 Y29.98133
G01 X59.30148 Y29.97930
G01 X59.41853 Y29.94148
G01 X59.46757 Y29.92324
G01 X59.47362 Y29.92004
G01 X59.60242 Y29.85077
G01 X59.61179 Y29.84582
G01 X59.66544 Y29.81819
G01 X59.67019 Y29.81577
G01 X59.69219 Y29.80467
G01 X59.81746 Y29.75624
G01 X59.89912 Y29.73307
G01 X59.92912 Y29.72507
G01 X59.97440 Y29.71374
G01 X60.04385 Y29.70005
G01 X60.07628 Y29.71737
G01 X60.11898 Y29.75237
G01 X60.15048 Y29.77823
G01 X60.21141 Y29.85240
G01 X60.25670 Y29.93703
G01 X60.27108 Y29.97168
G01 X60.29904 Y30.06373
G01 X60.30849 Y30.15946
G01 X60.30849 Y38.44372
G01 X60.29904 Y38.53948
G01 X60.27108 Y38.63155
G01 X60.25670 Y38.66617
G01 X60.21141 Y38.75083
G01 X60.15048 Y38.82498
G01 X60.07628 Y38.88583
G01 X59.99163 Y38.93110
G01 X59.95698 Y38.94542
G01 X59.86506 Y38.97331
G01 X59.76948 Y38.98276
G01 X50.56249 Y38.98276
G01 X50.46688 Y38.97331
G01 X50.37496 Y38.94542
G01 X50.34031 Y38.93110
G01 X50.25560 Y38.88583
G01 X50.18133 Y38.82490
G01 X50.12040 Y38.75060
G01 X50.07514 Y38.66592
G01 X50.06078 Y38.63125
G01 X50.03290 Y38.53933
G01 X50.02347 Y38.44372
G01 X50.02347 Y30.09527
G01 X50.03015 Y30.01460
G01 X50.05004 Y29.93612
G01 X50.06038 Y29.90602
G01 X50.09657 Y29.82527
G01 X50.14666 Y29.75235
G01 X50.20907 Y29.68964
G01 X50.28174 Y29.63917
G01 X50.31433 Y29.62065
G01 X50.32408 Y29.61631
G01 X50.32576 Y29.61674
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X50.34651 Y28.20554 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X50.34651 Y28.20554
G01 X50.32568 Y28.21184
G01 X50.30767 Y28.23876
G01 X50.23373 Y28.37709
G01 X50.21298 Y28.42723
G01 X50.19698 Y28.46581
G01 X50.15146 Y28.61590
G01 X50.13272 Y28.71011
G01 X50.11735 Y28.86619
G01 X50.11735 Y28.96223
G01 X50.13272 Y29.11831
G01 X50.15146 Y29.21252
G01 X50.19698 Y29.36261
G01 X50.21298 Y29.40119
G01 X50.23373 Y29.45133
G01 X50.30767 Y29.58966
G01 X50.32576 Y29.61674
G01 X50.32578 Y29.61676
G01 X50.40092 Y29.63678
G01 X50.57107 Y29.70003
G01 X50.63320 Y29.73104
G01 X50.64206 Y29.73553
G01 X50.67610 Y29.75316
G01 X50.76929 Y29.81242
G01 X50.77762 Y29.81885
G01 X50.80219 Y29.83683
G01 X50.81819 Y29.84574
G01 X50.95629 Y29.92001
G01 X50.96238 Y29.92324
G01 X51.01143 Y29.94148
G01 X51.13475 Y29.98133
G01 X51.16134 Y29.98755
G01 X51.20102 Y29.99545
G01 X51.21938 Y29.99817
G01 X51.31412 Y30.01074
G01 X51.37541 Y30.01374
G01 X51.43449 Y30.01374
G01 X51.49583 Y30.01074
G01 X51.59058 Y29.99817
G01 X51.64861 Y29.98755
G01 X51.67526 Y29.98133
G01 X51.68148 Y29.97930
G01 X51.79853 Y29.94148
G01 X51.84757 Y29.92324
G01 X51.85362 Y29.92004
G01 X51.99174 Y29.84574
G01 X52.00775 Y29.83683
G01 X52.04064 Y29.81234
G01 X52.15072 Y29.72433
G01 X52.16230 Y29.71341
G01 X52.20320 Y29.67076
G01 X52.27333 Y29.59009
G01 X52.30294 Y29.54973
G01 X52.33546 Y29.50053
G01 X52.37257 Y29.43790
G01 X52.40934 Y29.36221
G01 X52.43251 Y29.30785
G01 X52.44590 Y29.27158
G01 X52.47759 Y29.15763
G01 X52.49062 Y29.09992
G01 X52.49141 Y29.09551
G01 X52.50515 Y28.94377
G01 X52.50711 Y28.91420
G01 X52.50515 Y28.88466
G01 X52.50348 Y28.86602
G01 X52.50287 Y28.76330
G01 X52.50411 Y28.74712
G01 X52.51168 Y28.73221
G01 X52.51938 Y28.71758
G01 X52.54793 Y28.66482
G01 X52.56101 Y28.64186
G01 X52.56510 Y28.63505
G01 X52.57975 Y28.60407
G01 X52.60233 Y28.54956
G01 X52.61244 Y28.52129
G01 X52.61389 Y28.51725
G01 X52.62225 Y28.48390
G01 X52.63375 Y28.42606
G01 X52.63777 Y28.39901
G01 X52.63878 Y28.39210
G01 X52.64048 Y28.35776
G01 X52.64120 Y28.32822
G01 X52.64120 Y24.52970
G01 X52.65313 Y24.41007
G01 X52.66060 Y24.37255
G01 X52.70114 Y24.24042
G01 X52.83355 Y24.19981
G01 X52.87104 Y24.19237
G01 X52.99047 Y24.18048
G01 X53.01699 Y24.18048
G01 X53.03672 Y24.18015
G01 X53.04051 Y24.17977
G01 X53.17896 Y23.88022
G01 X53.17896 Y22.18023
G01 X53.04051 Y21.88069
G01 X53.03667 Y21.88031
G01 X53.01699 Y21.87997
G01 X51.31699 Y21.87997
G01 X51.29728 Y21.88031
G01 X51.23891 Y21.88897
G01 X51.16622 Y21.91907
G01 X51.10376 Y21.96700
G01 X51.05585 Y22.02945
G01 X51.02571 Y22.10220
G01 X51.01704 Y22.16059
G01 X51.01671 Y22.18023
G01 X51.01671 Y23.88022
G01 X51.01704 Y23.89986
G01 X51.02571 Y23.95825
G01 X51.05585 Y24.03100
G01 X51.10376 Y24.09346
G01 X51.19055 Y24.15683
G01 X51.20196 Y24.16336
G01 X51.21323 Y24.16966
G01 X51.30254 Y24.21835
G01 X51.32139 Y24.29132
G01 X51.32883 Y24.32881
G01 X51.34072 Y24.44824
G01 X51.34072 Y27.52363
G01 X51.33680 Y27.59221
G01 X51.33429 Y27.61430
G01 X51.29401 Y27.77653
G01 X51.25583 Y27.79454
G01 X51.21968 Y27.81029
G01 X51.21750 Y27.81123
G01 X51.15989 Y27.83610
G01 X51.10574 Y27.85649
G01 X51.01143 Y27.88697
G01 X50.96238 Y27.90521
G01 X50.95629 Y27.90844
G01 X50.81819 Y27.98271
G01 X50.80213 Y27.99167
G01 X50.77762 Y28.00958
G01 X50.76929 Y28.01603
G01 X50.69357 Y28.06589
G01 X50.66533 Y28.08164
G01 X50.63378 Y28.09812
G01 X50.57135 Y28.12865
G01 X50.39982 Y28.19076
G01 X50.39243 Y28.19269
G01 X50.34651 Y28.20554
G01 X50.32464 Y28.21214
G01 X50.25560 Y28.17524
G01 X50.21298 Y28.14024
G01 X50.18133 Y28.11430
G01 X50.12040 Y28.04003
G01 X50.07514 Y27.95532
G01 X50.06078 Y27.92068
G01 X50.03290 Y27.82876
G01 X50.02347 Y27.73315
G01 X50.02347 Y13.33127
G01 X50.03015 Y13.25060
G01 X50.05004 Y13.17212
G01 X50.06038 Y13.14202
G01 X50.09657 Y13.06127
G01 X50.14666 Y12.98835
G01 X50.20907 Y12.92564
G01 X50.28174 Y12.87517
G01 X50.31433 Y12.85665
G01 X50.32408 Y12.85231
G01 X50.32576 Y12.85274
G01 X50.32578 Y12.85276
G01 X50.40092 Y12.87278
G01 X50.57107 Y12.93603
G01 X50.63320 Y12.96704
G01 X50.64206 Y12.97153
G01 X50.67610 Y12.98916
G01 X50.76929 Y13.04842
G01 X50.77762 Y13.05485
G01 X50.80219 Y13.07283
G01 X50.81819 Y13.08175
G01 X50.95629 Y13.15601
G01 X50.96238 Y13.15924
G01 X51.01143 Y13.17748
G01 X51.10574 Y13.20796
G01 X51.15989 Y13.22835
G01 X51.17069 Y13.23300
G01 X51.19144 Y13.24154
G01 X51.21765 Y13.25175
G01 X51.29461 Y13.28738
G01 X51.32139 Y13.38388
G01 X51.32883 Y13.42137
G01 X51.34072 Y13.54080
G01 X51.34072 Y17.01318
G01 X51.33007 Y17.12626
G01 X51.32647 Y17.14531
G01 X51.31798 Y17.15977
G01 X51.26027 Y17.24216
G01 X51.22741 Y17.28694
G01 X51.19492 Y17.33614
G01 X51.15542 Y17.40279
G01 X51.11641 Y17.48316
G01 X51.09324 Y17.53746
G01 X51.07877 Y17.57666
G01 X51.04529 Y17.69703
G01 X51.03226 Y17.75474
G01 X51.03122 Y17.76070
G01 X51.01671 Y17.92065
G01 X51.01476 Y17.95021
G01 X51.01671 Y17.97980
G01 X51.03122 Y18.13975
G01 X51.03226 Y18.14572
G01 X51.04529 Y18.20343
G01 X51.07877 Y18.32380
G01 X51.09324 Y18.36299
G01 X51.11641 Y18.41729
G01 X51.15542 Y18.49766
G01 X51.19492 Y18.56431
G01 X51.22741 Y18.61351
G01 X51.25918 Y18.65679
G01 X51.33335 Y18.74211
G01 X51.37427 Y18.78478
G01 X51.38735 Y18.79713
G01 X51.50350 Y18.88996
G01 X51.53680 Y18.91475
G01 X51.55235 Y18.92341
G01 X51.69911 Y19.00233
G01 X51.70427 Y19.00508
G01 X51.75425 Y19.02372
G01 X51.88445 Y19.06581
G01 X51.91354 Y19.07261
G01 X51.95395 Y19.08064
G01 X51.97168 Y19.08326
G01 X52.07196 Y19.09654
G01 X52.13746 Y19.09974
G01 X52.19647 Y19.09974
G01 X52.26195 Y19.09654
G01 X52.36228 Y19.08323
G01 X52.41539 Y19.07376
G01 X52.42042 Y19.07261
G01 X52.44950 Y19.06581
G01 X52.57970 Y19.02372
G01 X52.62969 Y19.00508
G01 X52.63487 Y19.00233
G01 X52.78161 Y18.92341
G01 X52.79713 Y18.91475
G01 X52.83043 Y18.88996
G01 X52.94658 Y18.79713
G01 X52.95966 Y18.78478
G01 X53.00058 Y18.74213
G01 X53.03845 Y18.69857
G01 X53.07742 Y18.58966
G01 X53.09268 Y18.53952
G01 X53.13441 Y18.37287
G01 X53.14234 Y18.33314
G01 X53.16705 Y18.16655
G01 X53.17038 Y18.13279
G01 X53.17858 Y17.96614
G01 X53.17858 Y17.93431
G01 X53.17038 Y17.76766
G01 X53.16705 Y17.73391
G01 X53.14234 Y17.56731
G01 X53.13441 Y17.52758
G01 X53.09268 Y17.36093
G01 X53.07742 Y17.31079
G01 X53.03845 Y17.20188
G01 X53.00058 Y17.15832
G01 X52.95966 Y17.11567
G01 X52.94661 Y17.10333
G01 X52.83043 Y17.01049
G01 X52.78229 Y16.97574
G01 X52.77452 Y16.97071
G01 X52.76477 Y16.96424
G01 X52.75865 Y16.96010
G01 X52.66957 Y16.88710
G01 X52.66060 Y16.84831
G01 X52.65313 Y16.81080
G01 X52.64120 Y16.69114
G01 X52.64120 Y12.73620
G01 X52.64048 Y12.70669
G01 X52.63881 Y12.67240
G01 X52.63685 Y12.65937
G01 X52.63375 Y12.63841
G01 X52.62225 Y12.58058
G01 X52.61392 Y12.54725
G01 X52.60233 Y12.51492
G01 X52.59537 Y12.49640
G01 X52.57975 Y12.46041
G01 X52.56510 Y12.42937
G01 X52.56101 Y12.42259
G01 X52.54793 Y12.39965
G01 X52.51938 Y12.34690
G01 X52.51168 Y12.33224
G01 X52.50411 Y12.31736
G01 X52.50287 Y12.30115
G01 X52.50345 Y12.19843
G01 X52.50515 Y12.17977
G01 X52.50711 Y12.15023
G01 X52.50515 Y12.12066
G01 X52.49141 Y11.96895
G01 X52.49062 Y11.96450
G01 X52.47759 Y11.90682
G01 X52.44590 Y11.79287
G01 X52.43251 Y11.75660
G01 X52.40934 Y11.70225
G01 X52.37259 Y11.62658
G01 X52.33546 Y11.56392
G01 X52.30294 Y11.51472
G01 X52.27333 Y11.47436
G01 X52.20320 Y11.39369
G01 X52.16230 Y11.35104
G01 X52.15072 Y11.34012
G01 X52.04064 Y11.25211
G01 X52.00775 Y11.22762
G01 X51.99174 Y11.21871
G01 X51.85362 Y11.14441
G01 X51.84757 Y11.14121
G01 X51.79853 Y11.12297
G01 X51.67521 Y11.08312
G01 X51.64861 Y11.07690
G01 X51.59058 Y11.06628
G01 X51.49583 Y11.05371
G01 X51.43449 Y11.05071
G01 X51.37541 Y11.05071
G01 X51.31412 Y11.05371
G01 X51.21938 Y11.06628
G01 X51.16134 Y11.07690
G01 X51.13472 Y11.08312
G01 X51.01143 Y11.12297
G01 X50.96238 Y11.14121
G01 X50.95629 Y11.14444
G01 X50.81819 Y11.21871
G01 X50.80213 Y11.22767
G01 X50.77762 Y11.24558
G01 X50.76929 Y11.25203
G01 X50.69357 Y11.30189
G01 X50.66533 Y11.31764
G01 X50.63378 Y11.33412
G01 X50.57135 Y11.36465
G01 X50.39982 Y11.42676
G01 X50.39243 Y11.42869
G01 X50.34651 Y11.44154
G01 X50.32568 Y11.44784
G01 X50.30767 Y11.47476
G01 X50.23373 Y11.61309
G01 X50.19698 Y11.70181
G01 X50.15146 Y11.85190
G01 X50.13272 Y11.94611
G01 X50.11735 Y12.10219
G01 X50.11735 Y12.19823
G01 X50.13272 Y12.35431
G01 X50.15146 Y12.44852
G01 X50.19698 Y12.59861
G01 X50.21298 Y12.63719
G01 X50.23373 Y12.68733
G01 X50.30767 Y12.82566
G01 X50.32576 Y12.85274
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X46.29915 Y20.29420 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X46.29915 Y20.29420
G01 X46.29915 Y21.31068
G01 X46.25645 Y21.35013
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.72092 Y20.51061 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.72092 Y20.51061
G01 X43.71909 Y20.49829
G01 X43.67713 Y20.35999
G01 X43.64038 Y20.27124
G01 X43.56646 Y20.13291
G01 X43.51310 Y20.05305
G01 X43.41360 Y19.93182
G01 X43.34568 Y19.86390
G01 X43.31490 Y19.83863
G01 X43.22445 Y19.76441
G01 X43.14457 Y19.71104
G01 X43.00626 Y19.63713
G01 X42.91752 Y19.60035
G01 X42.76745 Y19.55483
G01 X42.67325 Y19.53609
G01 X42.51716 Y19.52072
G01 X42.42110 Y19.52072
G01 X42.26504 Y19.53609
G01 X42.17083 Y19.55483
G01 X42.02074 Y19.60035
G01 X41.93200 Y19.63713
G01 X41.79369 Y19.71104
G01 X41.71384 Y19.76441
G01 X41.59260 Y19.86390
G01 X41.52468 Y19.93182
G01 X41.42519 Y20.05305
G01 X41.37183 Y20.13291
G01 X41.29789 Y20.27124
G01 X41.26113 Y20.35999
G01 X41.21562 Y20.51005
G01 X41.19911 Y20.59275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X41.19911 Y20.60451 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X41.19911 Y20.60451
G01 X41.19911 Y20.84716
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X39.62575 Y22.02498 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X39.62575 Y22.02498
G01 X39.61437 Y22.04002
G01 X39.47503 Y22.18838
G01 X39.41978 Y22.23448
G01 X39.39027 Y22.25882
G01 X39.28997 Y22.32638
G01 X39.27668 Y22.33352
G01 X39.26162 Y22.34190
G01 X39.22784 Y22.36702
G01 X39.10566 Y22.46468
G01 X39.09106 Y22.47847
G01 X39.09027 Y22.47924
G01 X39.05016 Y22.52110
G01 X38.97188 Y22.61114
G01 X38.93802 Y22.65729
G01 X38.90546 Y22.70657
G01 X38.86363 Y22.77718
G01 X38.82235 Y22.86219
G01 X38.79921 Y22.91645
G01 X38.78364 Y22.95856
G01 X38.74836 Y23.08538
G01 X38.73533 Y23.14314
G01 X38.73401 Y23.15061
G01 X38.71877 Y23.31881
G01 X38.71681 Y23.34837
G01 X38.71877 Y23.37799
G01 X38.73401 Y23.54614
G01 X38.73533 Y23.55361
G01 X38.74836 Y23.61137
G01 X38.78364 Y23.73819
G01 X38.79921 Y23.78030
G01 X38.82235 Y23.83456
G01 X38.86363 Y23.91957
G01 X38.90546 Y23.99018
G01 X38.93800 Y24.03943
G01 X38.97188 Y24.08563
G01 X39.05016 Y24.17565
G01 X39.09108 Y24.21832
G01 X39.10564 Y24.23204
G01 X39.22786 Y24.32975
G01 X39.26157 Y24.35482
G01 X39.27668 Y24.36321
G01 X39.43205 Y24.44677
G01 X39.43632 Y24.44906
G01 X39.48725 Y24.46811
G01 X39.62438 Y24.51243
G01 X39.65593 Y24.51982
G01 X39.69708 Y24.52795
G01 X39.71404 Y24.53044
G01 X39.81999 Y24.54449
G01 X39.88963 Y24.54789
G01 X39.94864 Y24.54789
G01 X40.01826 Y24.54449
G01 X40.12420 Y24.53044
G01 X40.17780 Y24.52086
G01 X40.18232 Y24.51982
G01 X40.21389 Y24.51243
G01 X40.35100 Y24.46811
G01 X40.40190 Y24.44906
G01 X40.40619 Y24.44680
G01 X40.56157 Y24.36323
G01 X40.57665 Y24.35482
G01 X40.61036 Y24.32975
G01 X40.73261 Y24.23207
G01 X40.74716 Y24.21832
G01 X40.78813 Y24.17563
G01 X40.86637 Y24.08563
G01 X40.90027 Y24.03941
G01 X40.93279 Y23.99021
G01 X40.97459 Y23.91959
G01 X41.01590 Y23.83458
G01 X41.03903 Y23.78030
G01 X41.05460 Y23.73819
G01 X41.08989 Y23.61137
G01 X41.10292 Y23.55361
G01 X41.10424 Y23.54614
G01 X41.11948 Y23.37799
G01 X41.12143 Y23.34837
G01 X41.11948 Y23.31881
G01 X41.10800 Y23.19216
G01 X41.10706 Y23.18048
G01 X41.10678 Y23.17644
G01 X41.10530 Y23.14291
G01 X41.10431 Y23.08101
G01 X41.10439 Y23.05615
G01 X41.11432 Y23.04081
G01 X41.13558 Y23.00903
G01 X41.21163 Y22.91617
G01 X42.11688 Y22.01091
G01 X42.20975 Y21.93484
G01 X42.24152 Y21.91360
G01 X42.24967 Y21.90824
G01 X42.28224 Y21.90555
G01 X42.36385 Y21.90418
G01 X42.43957 Y21.90789
G01 X42.49865 Y21.90789
G01 X42.55999 Y21.90489
G01 X42.65473 Y21.89232
G01 X42.71277 Y21.88170
G01 X42.73936 Y21.87548
G01 X42.86225 Y21.83575
G01 X42.86268 Y21.83563
G01 X42.91173 Y21.81739
G01 X42.91777 Y21.81419
G01 X43.05590 Y21.73989
G01 X43.07190 Y21.73098
G01 X43.10479 Y21.70649
G01 X43.21487 Y21.61848
G01 X43.22646 Y21.60753
G01 X43.26735 Y21.56491
G01 X43.31376 Y21.51152
G01 X43.37502 Y21.45038
G01 X43.39118 Y21.43636
G01 X43.41670 Y21.41302
G01 X43.42285 Y21.40710
G01 X43.55988 Y21.30253
G01 X43.64894 Y21.24818
G01 X43.68635 Y21.22641
G01 X43.71912 Y21.11841
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X43.71912 Y21.23489 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X43.71912 Y21.23489
G01 X43.69303 Y21.22791
G01 X43.68587 Y21.22669
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.95827 Y17.54552 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.95827 Y17.54552
G01 X39.02017 Y17.56426
G01 X39.10891 Y17.60101
G01 X39.16942 Y17.63337
G01 X39.24927 Y17.68674
G01 X39.30231 Y17.73025
G01 X39.33795 Y17.76256
G01 X40.49095 Y18.91557
G01 X40.52326 Y18.95120
G01 X40.56677 Y19.00424
G01 X40.62014 Y19.08410
G01 X40.65250 Y19.14460
G01 X40.68925 Y19.23335
G01 X40.70916 Y19.29900
G01 X40.72791 Y19.39321
G01 X40.73462 Y19.46151
G01 X40.73698 Y19.50952
G01 X40.73698 Y19.80754
G01 X40.80568 Y19.86390
G01 X40.87360 Y19.93182
G01 X40.95412 Y20.02994
G01 X40.97310 Y20.05305
G01 X41.02646 Y20.13291
G01 X41.10038 Y20.27124
G01 X41.13713 Y20.35999
G01 X41.18267 Y20.51005
G01 X41.19911 Y20.59275
G01 X41.19913 Y20.76212
G01 X41.19911 Y20.84716
G01 X41.19575 Y20.85435
G01 X41.12456 Y21.00489
G01 X41.08592 Y21.07731
G01 X41.00279 Y21.21599
G01 X40.96471 Y21.27304
G01 X40.87028 Y21.40037
G01 X40.83157 Y21.44757
G01 X40.72613 Y21.56390
G01 X40.68465 Y21.60538
G01 X40.56835 Y21.71081
G01 X40.52108 Y21.74957
G01 X40.39372 Y21.84403
G01 X40.33675 Y21.88206
G01 X40.19809 Y21.96517
G01 X40.12570 Y22.00377
G01 X40.07269 Y22.02887
G01 X39.97058 Y22.02887
G01 X39.96047 Y22.02882
G01 X39.88773 Y22.02793
G01 X39.87772 Y22.02788
G01 X39.73017 Y22.02788
G01 X39.70038 Y22.02737
G01 X39.64193 Y22.02539
G01 X39.62575 Y22.02498
G01 X39.59611 Y21.98734
G01 X39.56746 Y21.95262
G01 X39.51714 Y21.89646
G01 X39.46500 Y21.84309
G01 X39.40670 Y21.78998
G01 X39.39078 Y21.77713
G01 X39.34160 Y21.74124
G01 X39.33909 Y21.73959
G01 X39.29350 Y21.70652
G01 X39.18339 Y21.61851
G01 X39.17183 Y21.60756
G01 X39.13089 Y21.56491
G01 X39.06076 Y21.48424
G01 X39.03114 Y21.44388
G01 X38.99860 Y21.39463
G01 X38.95512 Y21.32125
G01 X38.91488 Y21.26159
G01 X38.88318 Y21.21998
G01 X38.87567 Y21.20992
G01 X38.85961 Y21.18803
G01 X38.76360 Y21.08003
G01 X38.68887 Y21.00931
G01 X38.65913 Y20.98206
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X38.65913 Y20.59275 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X38.65913 Y20.59275
G01 X38.64267 Y20.51005
G01 X38.59713 Y20.35999
G01 X38.56038 Y20.27124
G01 X38.48646 Y20.13291
G01 X38.43310 Y20.05305
G01 X38.41412 Y20.02994
G01 X38.33360 Y19.93182
G01 X38.26568 Y19.86390
G01 X38.14445 Y19.76441
G01 X38.06457 Y19.71104
G01 X37.92626 Y19.63713
G01 X37.83752 Y19.60035
G01 X37.68745 Y19.55483
G01 X37.59325 Y19.53609
G01 X37.43716 Y19.52072
G01 X37.34110 Y19.52072
G01 X37.18504 Y19.53609
G01 X37.09083 Y19.55483
G01 X36.94074 Y19.60035
G01 X36.85200 Y19.63713
G01 X36.71369 Y19.71104
G01 X36.63384 Y19.76441
G01 X36.51260 Y19.86390
G01 X36.44468 Y19.93182
G01 X36.34519 Y20.05305
G01 X36.29183 Y20.13291
G01 X36.21789 Y20.27124
G01 X36.18113 Y20.35999
G01 X36.13562 Y20.51005
G01 X36.11913 Y20.59275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X36.11913 Y21.02377 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X36.11913 Y21.02377
G01 X36.13562 Y21.10667
G01 X36.18113 Y21.25676
G01 X36.18418 Y21.26410
G01 X35.91017 Y21.53812
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X35.57882 Y21.86946 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X35.57882 Y21.86946
G01 X35.47928 Y21.96900
G01 X35.41748 Y21.96293
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X34.84811 Y22.07578 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X34.84811 Y22.07578
G01 X34.80651 Y22.14980
G01 X34.69157 Y22.30901
G01 X34.67039 Y22.33164
G01 X34.64773 Y22.35714
G01 X34.64502 Y22.36037
G01 X34.55858 Y22.44477
G01 X34.53366 Y22.46468
G01 X34.51906 Y22.47847
G01 X34.51827 Y22.47924
G01 X34.47816 Y22.52110
G01 X34.39988 Y22.61114
G01 X34.36602 Y22.65729
G01 X34.33346 Y22.70657
G01 X34.29163 Y22.77718
G01 X34.25035 Y22.86219
G01 X34.22721 Y22.91645
G01 X34.21164 Y22.95856
G01 X34.17636 Y23.08538
G01 X34.16333 Y23.14314
G01 X34.16201 Y23.15061
G01 X34.14677 Y23.31881
G01 X34.14481 Y23.34837
G01 X34.14677 Y23.37799
G01 X34.16201 Y23.54614
G01 X34.16333 Y23.55361
G01 X34.17636 Y23.61137
G01 X34.21164 Y23.73819
G01 X34.22721 Y23.78030
G01 X34.25035 Y23.83456
G01 X34.29163 Y23.91957
G01 X34.33346 Y23.99018
G01 X34.36600 Y24.03943
G01 X34.39988 Y24.08563
G01 X34.47816 Y24.17565
G01 X34.51908 Y24.21832
G01 X34.53364 Y24.23204
G01 X34.65586 Y24.32975
G01 X34.68957 Y24.35482
G01 X34.70468 Y24.36321
G01 X34.86005 Y24.44677
G01 X34.86432 Y24.44906
G01 X34.91525 Y24.46811
G01 X35.05238 Y24.51243
G01 X35.08393 Y24.51982
G01 X35.12508 Y24.52795
G01 X35.14204 Y24.53044
G01 X35.24799 Y24.54449
G01 X35.31763 Y24.54789
G01 X35.37664 Y24.54789
G01 X35.44626 Y24.54449
G01 X35.55220 Y24.53044
G01 X35.60580 Y24.52086
G01 X35.61032 Y24.51982
G01 X35.64189 Y24.51243
G01 X35.77900 Y24.46811
G01 X35.82990 Y24.44906
G01 X35.83419 Y24.44680
G01 X35.98957 Y24.36323
G01 X36.00465 Y24.35482
G01 X36.03836 Y24.32975
G01 X36.16061 Y24.23207
G01 X36.17516 Y24.21832
G01 X36.21613 Y24.17563
G01 X36.29437 Y24.08563
G01 X36.32827 Y24.03941
G01 X36.36079 Y23.99021
G01 X36.40259 Y23.91959
G01 X36.44390 Y23.83458
G01 X36.46703 Y23.78030
G01 X36.48260 Y23.73819
G01 X36.51789 Y23.61137
G01 X36.53092 Y23.55361
G01 X36.53224 Y23.54614
G01 X36.54748 Y23.37799
G01 X36.54943 Y23.34837
G01 X36.54748 Y23.31881
G01 X36.53600 Y23.19216
G01 X36.53506 Y23.18048
G01 X36.53478 Y23.17644
G01 X36.53330 Y23.14291
G01 X36.53231 Y23.08101
G01 X36.53239 Y23.05615
G01 X36.54232 Y23.04081
G01 X36.56358 Y23.00903
G01 X36.63963 Y22.91617
G01 X37.62896 Y21.92684
G01 X37.68021 Y21.88112
G01 X37.69761 Y21.86730
G01 X37.76205 Y21.84228
G01 X37.78268 Y21.83563
G01 X37.83173 Y21.81739
G01 X37.83777 Y21.81419
G01 X37.97590 Y21.73989
G01 X37.99190 Y21.73098
G01 X38.02479 Y21.70649
G01 X38.13487 Y21.61848
G01 X38.14646 Y21.60756
G01 X38.18735 Y21.56491
G01 X38.25748 Y21.48424
G01 X38.28710 Y21.44388
G01 X38.28758 Y21.44325
G01 X38.31961 Y21.39468
G01 X38.36309 Y21.32128
G01 X38.39840 Y21.26816
G01 X38.40328 Y21.26159
G01 X38.41044 Y21.25176
G01 X38.44069 Y21.20929
G01 X38.55677 Y21.08061
G01 X38.55814 Y21.07937
G01 X38.59055 Y21.04879
G01 X38.63045 Y21.00942
G01 X38.65913 Y20.98206
G01 X38.65913 Y20.59275
G01 X38.67562 Y20.51005
G01 X38.72113 Y20.35999
G01 X38.75789 Y20.27124
G01 X38.83183 Y20.13291
G01 X38.88519 Y20.05305
G01 X38.98468 Y19.93182
G01 X39.05260 Y19.86390
G01 X39.05700 Y19.86029
G01 X39.05700 Y19.85747
G01 X38.39604 Y19.19652
G01 X34.41517 Y19.19652
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.73712 Y17.51653 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.73712 Y17.51653
G01 X32.73712 Y17.33327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X32.74809 Y16.19937 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X32.74809 Y16.19937
G01 X32.73984 Y16.19591
G01 X32.56305 Y16.10150
G01 X32.50232 Y16.06007
G01 X32.46923 Y16.03602
G01 X32.43880 Y16.01247
G01 X32.37136 Y15.95202
G01 X32.35015 Y15.92997
G01 X32.32981 Y15.90983
G01 X32.31673 Y15.89749
G01 X32.20055 Y15.80462
G01 X32.16727 Y15.77986
G01 X32.15178 Y15.77122
G01 X32.00504 Y15.69228
G01 X31.99984 Y15.68954
G01 X31.94982 Y15.67087
G01 X31.81962 Y15.62881
G01 X31.79051 Y15.62197
G01 X31.73242 Y15.61136
G01 X31.63209 Y15.59807
G01 X31.56664 Y15.59485
G01 X31.50763 Y15.59485
G01 X31.44215 Y15.59807
G01 X31.34182 Y15.61136
G01 X31.28373 Y15.62197
G01 X31.25462 Y15.62881
G01 X31.12442 Y15.67087
G01 X31.07441 Y15.68954
G01 X31.06920 Y15.69228
G01 X30.92247 Y15.77122
G01 X30.90697 Y15.77986
G01 X30.87368 Y15.80462
G01 X30.84218 Y15.82980
G01 X30.75752 Y15.89749
G01 X30.74444 Y15.90983
G01 X30.70352 Y15.95248
G01 X30.62933 Y16.03782
G01 X30.59758 Y16.08108
G01 X30.56507 Y16.13030
G01 X30.56037 Y16.13823
G01 X30.52544 Y16.19076
G01 X30.51333 Y16.20709
G01 X30.46443 Y16.26543
G01 X30.41569 Y16.31715
G01 X30.36517 Y16.36635
G01 X30.33253 Y16.39563
G01 X30.27022 Y16.44717
G01 X30.26712 Y16.44953
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X27.72712 Y16.44953 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X27.72712 Y16.44953
G01 X27.73022 Y16.44717
G01 X27.79253 Y16.39563
G01 X27.82517 Y16.36635
G01 X27.87569 Y16.31715
G01 X27.92443 Y16.26543
G01 X27.97333 Y16.20709
G01 X27.98544 Y16.19076
G01 X28.02037 Y16.13823
G01 X28.02507 Y16.13030
G01 X28.05758 Y16.08108
G01 X28.08933 Y16.03782
G01 X28.16352 Y15.95248
G01 X28.20444 Y15.90983
G01 X28.21752 Y15.89749
G01 X28.30218 Y15.82980
G01 X28.33368 Y15.80462
G01 X28.36697 Y15.77986
G01 X28.38247 Y15.77122
G01 X28.52920 Y15.69228
G01 X28.53441 Y15.68954
G01 X28.58442 Y15.67087
G01 X28.71462 Y15.62881
G01 X28.74373 Y15.62197
G01 X28.80182 Y15.61136
G01 X28.90215 Y15.59807
G01 X28.96763 Y15.59485
G01 X29.02664 Y15.59485
G01 X29.09209 Y15.59807
G01 X29.19242 Y15.61136
G01 X29.25051 Y15.62197
G01 X29.27962 Y15.62881
G01 X29.40982 Y15.67087
G01 X29.45984 Y15.68954
G01 X29.46504 Y15.69228
G01 X29.61178 Y15.77122
G01 X29.62727 Y15.77986
G01 X29.66055 Y15.80462
G01 X29.77673 Y15.89749
G01 X29.78981 Y15.90983
G01 X29.83075 Y15.95250
G01 X29.90492 Y16.03782
G01 X29.93669 Y16.08110
G01 X29.96918 Y16.13030
G01 X29.97391 Y16.13828
G01 X30.04630 Y16.23663
G01 X30.07208 Y16.26536
G01 X30.11841 Y16.31720
G01 X30.26392 Y16.44719
G01 X30.26712 Y16.44953
G01 X30.26712 Y16.90003
G01 X30.29113 Y16.95080
G01 X30.32991 Y17.02349
G01 X30.41823 Y17.17084
G01 X30.45620 Y17.22771
G01 X30.55653 Y17.36302
G01 X30.59494 Y17.40980
G01 X30.70698 Y17.53343
G01 X30.74810 Y17.57455
G01 X30.85767 Y17.67386
G01 X30.86623 Y17.69195
G01 X30.89400 Y17.74402
G01 X30.93037 Y17.80467
G01 X30.95894 Y17.84750
G01 X31.00024 Y17.90320
G01 X31.03027 Y17.93977
G01 X31.07639 Y17.99068
G01 X31.09222 Y18.00729
G01 X31.80773 Y18.72283
G01 X31.87347 Y18.75003
G01 X31.89333 Y18.75771
G01 X31.96194 Y18.78227
G01 X31.99514 Y18.79235
G01 X32.06374 Y18.80955
G01 X32.09199 Y18.81519
G01 X32.16059 Y18.82535
G01 X32.18607 Y18.82786
G01 X32.25470 Y18.83124
G01 X32.26699 Y18.83154
G01 X33.33730 Y18.83154
G01 X33.34959 Y18.83185
G01 X33.41820 Y18.83523
G01 X33.44365 Y18.83774
G01 X33.51225 Y18.84790
G01 X33.54050 Y18.85354
G01 X33.60910 Y18.87074
G01 X33.64230 Y18.88082
G01 X33.71091 Y18.90538
G01 X33.73077 Y18.91305
G01 X34.41517 Y19.19652
G01 X34.74497 Y19.52626
G01 X34.80110 Y19.52072
G01 X34.89716 Y19.52072
G01 X35.05325 Y19.53609
G01 X35.14745 Y19.55483
G01 X35.29752 Y19.60035
G01 X35.38626 Y19.63713
G01 X35.52457 Y19.71104
G01 X35.60445 Y19.76441
G01 X35.72568 Y19.86390
G01 X35.79360 Y19.93182
G01 X35.87412 Y20.02994
G01 X35.89310 Y20.05305
G01 X35.94646 Y20.13291
G01 X36.02038 Y20.27124
G01 X36.05713 Y20.35999
G01 X36.10267 Y20.51005
G01 X36.11913 Y20.59275
G01 X36.11913 Y21.02377
G01 X36.10267 Y21.10667
G01 X36.05713 Y21.25676
G01 X36.02038 Y21.34548
G01 X35.94646 Y21.48381
G01 X35.91017 Y21.53812
G01 X35.89076 Y21.56179
G01 X35.78530 Y21.67812
G01 X35.71890 Y21.74454
G01 X35.60257 Y21.84998
G01 X35.57882 Y21.86946
G01 X35.52457 Y21.90568
G01 X35.41748 Y21.96293
G01 X35.39452 Y21.96750
G01 X35.38116 Y21.97025
G01 X35.30171 Y21.98716
G01 X35.28939 Y21.98970
G01 X35.13486 Y22.02044
G01 X35.12782 Y22.02181
G01 X35.04898 Y22.03685
G01 X35.04184 Y22.03822
G01 X34.89439 Y22.06758
G01 X34.86785 Y22.07246
G01 X34.84811 Y22.07578
G01 X34.82167 Y22.05432
G01 X34.80638 Y22.04170
G01 X34.78667 Y22.02508
G01 X34.65932 Y21.93509
G01 X34.59968 Y21.90088
G01 X34.56333 Y21.88152
G01 X34.53790 Y21.86900
G01 X34.45599 Y21.83578
G01 X34.40651 Y21.81739
G01 X34.40044 Y21.81416
G01 X34.26234 Y21.73989
G01 X34.24634 Y21.73098
G01 X34.21350 Y21.70649
G01 X34.10339 Y21.61848
G01 X34.09183 Y21.60756
G01 X34.05089 Y21.56491
G01 X33.98076 Y21.48424
G01 X33.95114 Y21.44388
G01 X33.91860 Y21.39463
G01 X33.87512 Y21.32125
G01 X33.83488 Y21.26159
G01 X33.80318 Y21.21998
G01 X33.79567 Y21.20992
G01 X33.77961 Y21.18803
G01 X33.68360 Y21.08003
G01 X33.60887 Y21.00931
G01 X33.57913 Y20.98206
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.28554 Y20.06979 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.28554 Y20.06979
G01 X31.24675 Y20.08097
G01 X31.24647 Y20.08107
G01 X31.21183 Y20.13291
G01 X31.13789 Y20.27124
G01 X31.10113 Y20.35999
G01 X31.05562 Y20.51005
G01 X31.03913 Y20.59275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X31.03913 Y21.02377 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X31.03913 Y21.02377
G01 X31.05562 Y21.10667
G01 X31.10113 Y21.25676
G01 X31.13789 Y21.34548
G01 X31.21183 Y21.48381
G01 X31.26519 Y21.56367
G01 X31.28221 Y21.58442
G01 X31.28655 Y21.58970
G01 X30.90728 Y21.96900
G01 X30.82315 Y21.96072
G01 X30.72712 Y21.96072
G01 X30.55153 Y21.97802
G01 X30.45732 Y21.99676
G01 X30.28848 Y22.04797
G01 X30.19974 Y22.08472
G01 X30.18107 Y22.09468
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X30.15915 Y22.03408 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X30.15915 Y22.03408
G01 X30.21752 Y22.01637
G01 X30.30626 Y21.97962
G01 X30.44457 Y21.90568
G01 X30.52445 Y21.85231
G01 X30.64568 Y21.75282
G01 X30.71360 Y21.68490
G01 X30.81310 Y21.56367
G01 X30.86646 Y21.48381
G01 X30.94038 Y21.34548
G01 X30.97713 Y21.25676
G01 X31.02267 Y21.10667
G01 X31.03913 Y21.02377
G01 X31.03913 Y20.59275
G01 X31.02267 Y20.51005
G01 X30.97713 Y20.35999
G01 X30.94038 Y20.27124
G01 X30.86646 Y20.13291
G01 X30.81310 Y20.05305
G01 X30.71360 Y19.93182
G01 X30.64568 Y19.86390
G01 X30.53746 Y19.77508
G01 X30.52925 Y19.74803
G01 X30.49250 Y19.65928
G01 X30.46014 Y19.59878
G01 X30.40677 Y19.51892
G01 X30.36324 Y19.46588
G01 X30.33095 Y19.43025
G01 X28.98267 Y18.08201
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.20871 Y19.68389 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.20871 Y19.68389
G01 X28.66692 Y20.14208
G01 X28.59789 Y20.27124
G01 X28.56113 Y20.35999
G01 X28.51562 Y20.51005
G01 X28.49911 Y20.59275
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.49911 Y20.60451 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.49911 Y20.60451
G01 X28.49913 Y20.76212
G01 X28.49911 Y20.85468
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X28.49911 Y20.98206 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X28.49911 Y20.98206
G01 X28.47045 Y21.00942
G01 X28.43055 Y21.04879
G01 X28.39814 Y21.07937
G01 X28.39677 Y21.08061
G01 X28.28069 Y21.20929
G01 X28.25044 Y21.25176
G01 X28.24328 Y21.26159
G01 X28.23840 Y21.26816
G01 X28.20309 Y21.32128
G01 X28.15961 Y21.39468
G01 X28.12758 Y21.44325
G01 X28.12710 Y21.44388
G01 X28.09748 Y21.48424
G01 X28.02735 Y21.56491
G01 X27.98646 Y21.60756
G01 X27.97452 Y21.61881
G01 X27.89362 Y21.69875
G01 X27.87579 Y21.71990
G01 X27.86898 Y21.72788
G01 X27.86797 Y21.72902
G01 X27.84772 Y21.86730
G01 X27.84752 Y21.87335
G01 X27.84721 Y21.89224
G01 X27.84721 Y22.29521
G01 X27.84650 Y22.32475
G01 X27.84483 Y22.35902
G01 X27.83977 Y22.39305
G01 X27.82827 Y22.45089
G01 X27.81991 Y22.48424
G01 X27.80835 Y22.51655
G01 X27.78577 Y22.57106
G01 X27.77109 Y22.60210
G01 X27.75344 Y22.63156
G01 X27.72062 Y22.68066
G01 X27.70020 Y22.70819
G01 X27.67709 Y22.73369
G01 X27.65677 Y22.75503
G01 X27.49563 Y22.91617
G01 X27.41958 Y23.00903
G01 X27.39832 Y23.04081
G01 X27.38839 Y23.05615
G01 X27.38831 Y23.08101
G01 X27.38930 Y23.14291
G01 X27.39078 Y23.17644
G01 X27.39106 Y23.18048
G01 X27.39200 Y23.19216
G01 X27.40348 Y23.31881
G01 X27.40543 Y23.34837
G01 X27.40348 Y23.37799
G01 X27.38824 Y23.54614
G01 X27.38692 Y23.55361
G01 X27.37389 Y23.61137
G01 X27.33860 Y23.73819
G01 X27.32303 Y23.78030
G01 X27.29990 Y23.83458
G01 X27.25859 Y23.91959
G01 X27.21679 Y23.99021
G01 X27.18427 Y24.03941
G01 X27.15037 Y24.08563
G01 X27.07213 Y24.17563
G01 X27.03116 Y24.21832
G01 X27.01661 Y24.23207
G01 X26.89436 Y24.32975
G01 X26.86065 Y24.35482
G01 X26.84557 Y24.36323
G01 X26.69019 Y24.44680
G01 X26.68590 Y24.44906
G01 X26.63500 Y24.46811
G01 X26.49789 Y24.51243
G01 X26.46632 Y24.51982
G01 X26.46180 Y24.52086
G01 X26.40820 Y24.53044
G01 X26.30226 Y24.54449
G01 X26.23264 Y24.54789
G01 X26.17363 Y24.54789
G01 X26.10399 Y24.54449
G01 X25.99804 Y24.53044
G01 X25.98108 Y24.52795
G01 X25.93993 Y24.51982
G01 X25.90838 Y24.51243
G01 X25.77125 Y24.46811
G01 X25.72032 Y24.44906
G01 X25.71605 Y24.44677
G01 X25.56068 Y24.36321
G01 X25.54557 Y24.35482
G01 X25.51186 Y24.32975
G01 X25.38964 Y24.23204
G01 X25.37508 Y24.21832
G01 X25.33416 Y24.17565
G01 X25.25588 Y24.08563
G01 X25.22200 Y24.03943
G01 X25.18946 Y23.99018
G01 X25.14763 Y23.91957
G01 X25.10635 Y23.83456
G01 X25.08321 Y23.78030
G01 X25.06764 Y23.73819
G01 X25.03236 Y23.61137
G01 X25.01933 Y23.55361
G01 X25.01801 Y23.54614
G01 X25.00277 Y23.37799
G01 X25.00081 Y23.34837
G01 X25.00277 Y23.31881
G01 X25.01801 Y23.15061
G01 X25.01933 Y23.14314
G01 X25.03236 Y23.08538
G01 X25.06764 Y22.95856
G01 X25.08321 Y22.91645
G01 X25.10635 Y22.86219
G01 X25.14763 Y22.77718
G01 X25.18946 Y22.70657
G01 X25.22202 Y22.65729
G01 X25.25588 Y22.61114
G01 X25.33416 Y22.52110
G01 X25.37427 Y22.47924
G01 X25.37506 Y22.47847
G01 X25.38966 Y22.46468
G01 X25.51184 Y22.36702
G01 X25.54557 Y22.34192
G01 X25.56068 Y22.33354
G01 X25.71605 Y22.24998
G01 X25.72032 Y22.24769
G01 X25.77125 Y22.22864
G01 X25.90836 Y22.18434
G01 X25.93993 Y22.17693
G01 X25.99807 Y22.16631
G01 X26.10399 Y22.15226
G01 X26.17076 Y22.14899
G01 X26.23297 Y22.14563
G01 X26.29164 Y22.13969
G01 X26.32989 Y22.13403
G01 X26.39012 Y22.12232
G01 X26.50259 Y22.00761
G01 X26.51351 Y21.96115
G01 X26.52095 Y21.92364
G01 X26.52227 Y21.68084
G01 X26.52182 Y21.67848
G01 X26.50162 Y21.65066
G01 X26.46967 Y21.61018
G01 X26.43089 Y21.56491
G01 X26.42926 Y21.56303
G01 X26.42723 Y21.56070
G01 X26.42621 Y21.55950
G01 X26.36076 Y21.48424
G01 X26.33114 Y21.44388
G01 X26.29860 Y21.39463
G01 X26.26152 Y21.33202
G01 X26.22474 Y21.25630
G01 X26.20162 Y21.20205
G01 X26.18819 Y21.16573
G01 X26.15651 Y21.05183
G01 X26.14346 Y20.99407
G01 X26.14270 Y20.98965
G01 X26.12893 Y20.83794
G01 X26.12697 Y20.80837
G01 X26.12893 Y20.77883
G01 X26.14270 Y20.62709
G01 X26.14346 Y20.62267
G01 X26.15651 Y20.56492
G01 X26.18819 Y20.45102
G01 X26.20162 Y20.41470
G01 X26.22474 Y20.36050
G01 X26.26152 Y20.28475
G01 X26.29860 Y20.22214
G01 X26.33114 Y20.17287
G01 X26.36076 Y20.13251
G01 X26.43089 Y20.05184
G01 X26.47186 Y20.00916
G01 X26.48339 Y19.99827
G01 X26.55141 Y19.94391
G01 X26.59352 Y19.91023
G01 X26.62636 Y19.88577
G01 X26.64229 Y19.87691
G01 X26.78041 Y19.80261
G01 X26.78651 Y19.79936
G01 X26.83558 Y19.78112
G01 X26.95887 Y19.74127
G01 X26.98549 Y19.73505
G01 X27.04353 Y19.72443
G01 X27.13825 Y19.71186
G01 X27.19957 Y19.70886
G01 X27.25865 Y19.70886
G01 X27.31999 Y19.71186
G01 X27.41473 Y19.72443
G01 X27.47277 Y19.73505
G01 X27.49936 Y19.74127
G01 X27.62268 Y19.78112
G01 X27.64231 Y19.78783
G01 X27.67866 Y19.80098
G01 X27.75989 Y19.82433
G01 X27.79796 Y19.83263
G01 X27.83578 Y19.83980
G01 X27.91242 Y19.85217
G01 X28.10279 Y19.86405
G01 X28.10535 Y19.86423
G01 X28.10599 Y19.86423
G01 X28.17360 Y19.93182
G01 X28.27310 Y20.05305
G01 X28.32646 Y20.13291
G01 X28.40038 Y20.27124
G01 X28.43713 Y20.35999
G01 X28.48267 Y20.51005
G01 X28.49911 Y20.59275
G01 X28.49911 Y20.98206
G01 X28.52887 Y21.00931
G01 X28.60360 Y21.08003
G01 X28.69961 Y21.18803
G01 X28.71567 Y21.20992
G01 X28.72318 Y21.21998
G01 X28.75488 Y21.26159
G01 X28.79512 Y21.32125
G01 X28.83860 Y21.39463
G01 X28.87114 Y21.44388
G01 X28.90076 Y21.48424
G01 X28.97089 Y21.56491
G01 X29.01183 Y21.60756
G01 X29.02339 Y21.61848
G01 X29.13350 Y21.70649
G01 X29.16634 Y21.73098
G01 X29.18234 Y21.73989
G01 X29.32044 Y21.81416
G01 X29.32651 Y21.81739
G01 X29.37558 Y21.83563
G01 X29.49890 Y21.87548
G01 X29.52549 Y21.88170
G01 X29.56519 Y21.88960
G01 X29.58353 Y21.89232
G01 X29.67855 Y21.90492
G01 X29.73921 Y21.91155
G01 X29.78600 Y21.91904
G01 X29.79997 Y21.92112
G01 X29.82224 Y21.92420
G01 X29.96121 Y21.95813
G01 X30.04477 Y21.98724
G01 X30.13479 Y22.02315
G01 X30.15915 Y22.03408
G01 X30.16646 Y22.04982
G01 X30.18168 Y22.09344
G01 X30.18107 Y22.09468
G01 X30.18107 Y22.09471
G01 X30.09781 Y22.26832
G01 X30.05686 Y22.33415
G01 X30.03306 Y22.36992
G01 X30.01058 Y22.40161
G01 X29.94678 Y22.47812
G01 X29.93037 Y22.49488
G01 X29.90616 Y22.52110
G01 X29.82788 Y22.61111
G01 X29.79402 Y22.65729
G01 X29.76146 Y22.70657
G01 X29.71963 Y22.77718
G01 X29.67835 Y22.86219
G01 X29.65521 Y22.91645
G01 X29.63964 Y22.95856
G01 X29.60436 Y23.08538
G01 X29.59133 Y23.14314
G01 X29.59001 Y23.15061
G01 X29.57477 Y23.31881
G01 X29.57281 Y23.34837
G01 X29.57477 Y23.37799
G01 X29.59001 Y23.54614
G01 X29.59133 Y23.55361
G01 X29.60436 Y23.61137
G01 X29.63964 Y23.73819
G01 X29.65521 Y23.78030
G01 X29.67835 Y23.83456
G01 X29.71963 Y23.91957
G01 X29.76146 Y23.99018
G01 X29.79400 Y24.03943
G01 X29.82788 Y24.08563
G01 X29.90616 Y24.17565
G01 X29.94708 Y24.21832
G01 X29.96164 Y24.23204
G01 X30.08386 Y24.32975
G01 X30.11757 Y24.35482
G01 X30.13268 Y24.36321
G01 X30.28805 Y24.44677
G01 X30.29232 Y24.44906
G01 X30.34325 Y24.46811
G01 X30.48038 Y24.51243
G01 X30.51193 Y24.51982
G01 X30.55308 Y24.52795
G01 X30.57004 Y24.53044
G01 X30.67599 Y24.54449
G01 X30.74563 Y24.54789
G01 X30.80464 Y24.54789
G01 X30.87426 Y24.54449
G01 X30.98020 Y24.53044
G01 X31.03380 Y24.52086
G01 X31.03832 Y24.51982
G01 X31.06989 Y24.51243
G01 X31.20700 Y24.46811
G01 X31.25790 Y24.44906
G01 X31.26219 Y24.44680
G01 X31.41757 Y24.36323
G01 X31.43265 Y24.35482
G01 X31.46636 Y24.32975
G01 X31.58861 Y24.23207
G01 X31.60316 Y24.21832
G01 X31.64413 Y24.17563
G01 X31.72237 Y24.08563
G01 X31.75627 Y24.03941
G01 X31.78879 Y23.99021
G01 X31.83059 Y23.91959
G01 X31.87190 Y23.83458
G01 X31.89503 Y23.78030
G01 X31.91060 Y23.73819
G01 X31.94589 Y23.61137
G01 X31.95892 Y23.55361
G01 X31.96024 Y23.54614
G01 X31.97548 Y23.37799
G01 X31.97743 Y23.34837
G01 X31.97548 Y23.31881
G01 X31.96400 Y23.19216
G01 X31.96306 Y23.18048
G01 X31.96278 Y23.17644
G01 X31.96130 Y23.14291
G01 X31.96031 Y23.08101
G01 X31.96039 Y23.05615
G01 X31.97032 Y23.04081
G01 X31.99158 Y23.00903
G01 X32.06763 Y22.91617
G01 X32.73677 Y22.24703
G01 X32.75709 Y22.22569
G01 X32.78015 Y22.20027
G01 X32.80062 Y22.17266
G01 X32.83344 Y22.12356
G01 X32.85109 Y22.09412
G01 X32.86577 Y22.06306
G01 X32.86920 Y22.05567
G01 X32.88835 Y22.00855
G01 X32.89993 Y21.97616
G01 X32.90827 Y21.94289
G01 X32.91977 Y21.88505
G01 X32.92874 Y21.82463
G01 X32.92991 Y21.81708
G01 X32.93471 Y21.78721
G01 X32.94705 Y21.72857
G01 X32.95518 Y21.71917
G01 X32.95681 Y21.71731
G01 X32.97961 Y21.69120
G01 X33.05467 Y21.61869
G01 X33.06646 Y21.60756
G01 X33.10735 Y21.56491
G01 X33.17748 Y21.48424
G01 X33.20710 Y21.44388
G01 X33.20758 Y21.44325
G01 X33.23961 Y21.39468
G01 X33.28309 Y21.32128
G01 X33.31840 Y21.26816
G01 X33.32328 Y21.26159
G01 X33.33044 Y21.25176
G01 X33.36069 Y21.20929
G01 X33.47677 Y21.08061
G01 X33.47814 Y21.07937
G01 X33.51055 Y21.04879
G01 X33.55045 Y21.00942
G01 X33.57913 Y20.98206
G01 X33.57913 Y20.76212
G01 X33.57911 Y20.71744
G01 X33.52810 Y20.60954
G01 X33.48723 Y20.53296
G01 X33.40412 Y20.39430
G01 X33.36364 Y20.33365
G01 X33.26917 Y20.20629
G01 X33.22782 Y20.15585
G01 X33.12236 Y20.03952
G01 X33.07796 Y19.99512
G01 X33.05914 Y19.97805
G01 X32.92772 Y19.93103
G01 X32.87550 Y19.91516
G01 X32.71866 Y19.87586
G01 X32.67649 Y19.86746
G01 X32.51967 Y19.84419
G01 X32.48327 Y19.84058
G01 X32.32643 Y19.83289
G01 X32.29181 Y19.83289
G01 X32.13499 Y19.84058
G01 X32.09862 Y19.84419
G01 X31.94177 Y19.86746
G01 X31.89958 Y19.87586
G01 X31.74274 Y19.91516
G01 X31.69056 Y19.93101
G01 X31.56595 Y19.97558
G01 X31.53347 Y19.98633
G01 X31.53319 Y19.98640
G01 X31.46222 Y20.01188
G01 X31.46196 Y20.01198
G01 X31.37883 Y20.04160
G01 X31.29989 Y20.06555
G01 X31.28554 Y20.06979
G01 X31.24680 Y20.08099
G01 X31.24675 Y20.08097
G01 X31.20103 Y20.06205
G01 X31.14053 Y20.02969
G01 X31.06067 Y19.97632
G01 X31.00761 Y19.93279
G01 X30.97200 Y19.90050
G01 X29.14381 Y18.07229
G01 X29.04515 Y18.08201
G01 X28.98267 Y18.08201
G01 X28.95041 Y18.06868
G01 X28.79044 Y17.99301
G01 X28.71729 Y17.95400
G01 X28.56995 Y17.86568
G01 X28.51264 Y17.82743
G01 X28.37734 Y17.72707
G01 X28.33020 Y17.68842
G01 X28.20657 Y17.57638
G01 X28.16515 Y17.53495
G01 X28.05311 Y17.41130
G01 X28.01442 Y17.36416
G01 X27.91407 Y17.22885
G01 X27.87581 Y17.17155
G01 X27.78750 Y17.02421
G01 X27.74848 Y16.95108
G01 X27.72712 Y16.90592
G01 X27.72712 Y16.44953
G01 X27.72392 Y16.44719
G01 X27.57841 Y16.31720
G01 X27.53208 Y16.26536
G01 X27.50630 Y16.23663
G01 X27.43391 Y16.13828
G01 X27.42918 Y16.13030
G01 X27.39669 Y16.08110
G01 X27.36492 Y16.03782
G01 X27.29075 Y15.95250
G01 X27.24981 Y15.90983
G01 X27.23673 Y15.89749
G01 X27.12055 Y15.80462
G01 X27.08727 Y15.77986
G01 X27.07178 Y15.77122
G01 X26.92504 Y15.69228
G01 X26.91984 Y15.68954
G01 X26.86982 Y15.67087
G01 X26.73962 Y15.62881
G01 X26.71051 Y15.62197
G01 X26.65242 Y15.61136
G01 X26.55209 Y15.59807
G01 X26.48664 Y15.59485
G01 X26.42763 Y15.59485
G01 X26.36215 Y15.59807
G01 X26.26182 Y15.61136
G01 X26.20373 Y15.62197
G01 X26.17462 Y15.62881
G01 X26.04442 Y15.67087
G01 X25.99441 Y15.68954
G01 X25.98920 Y15.69228
G01 X25.84247 Y15.77122
G01 X25.82697 Y15.77986
G01 X25.79368 Y15.80462
G01 X25.76218 Y15.82980
G01 X25.67752 Y15.89749
G01 X25.66444 Y15.90983
G01 X25.62352 Y15.95248
G01 X25.54933 Y16.03782
G01 X25.51758 Y16.08108
G01 X25.48507 Y16.13030
G01 X25.48037 Y16.13823
G01 X25.44544 Y16.19076
G01 X25.43333 Y16.20709
G01 X25.38443 Y16.26543
G01 X25.33569 Y16.31715
G01 X25.28517 Y16.36635
G01 X25.25253 Y16.39563
G01 X25.19022 Y16.44717
G01 X25.18712 Y16.44953
G01 X25.18712 Y17.03922
G01 X25.18402 Y17.04158
G01 X25.12172 Y17.09312
G01 X25.08908 Y17.12240
G01 X25.03856 Y17.17160
G01 X24.98982 Y17.22332
G01 X24.94074 Y17.28189
G01 X24.92865 Y17.29820
G01 X24.89391 Y17.35047
G01 X24.88918 Y17.35844
G01 X24.85669 Y17.40762
G01 X24.82492 Y17.45093
G01 X24.75078 Y17.53624
G01 X24.70978 Y17.57897
G01 X24.69675 Y17.59126
G01 X24.58052 Y17.68415
G01 X24.56335 Y17.69736
G01 X24.54135 Y17.71293
G01 X24.53251 Y17.71890
G01 X24.44420 Y17.79103
G01 X24.43655 Y17.79847
G01 X24.42937 Y17.82573
G01 X24.40871 Y17.96558
G01 X24.40851 Y17.97165
G01 X24.40821 Y17.99047
G01 X24.40821 Y19.42727
G01 X24.42009 Y19.54673
G01 X24.42756 Y19.58425
G01 X24.44953 Y19.66680
G01 X24.46315 Y19.67345
G01 X24.55306 Y19.71617
G01 X24.57034 Y19.72473
G01 X24.61324 Y19.74678
G01 X24.67635 Y19.79514
G01 X24.72428 Y19.85760
G01 X24.75438 Y19.93032
G01 X24.76304 Y19.98869
G01 X24.76338 Y20.00835
G01 X24.76338 Y21.60840
G01 X24.76304 Y21.62806
G01 X24.75438 Y21.68648
G01 X24.72431 Y21.75910
G01 X24.71745 Y21.76913
G01 X24.67635 Y21.82161
G01 X24.61390 Y21.86954
G01 X24.54118 Y21.89963
G01 X24.48281 Y21.90830
G01 X24.46315 Y21.90863
G01 X22.86312 Y21.90863
G01 X22.84334 Y21.90830
G01 X22.84060 Y21.90802
G01 X22.76734 Y21.89582
G01 X22.63910 Y21.86628
G01 X22.59736 Y21.85549
G01 X22.41560 Y21.80327
G01 X22.41558 Y21.80327
G01 X22.41418 Y21.80286
G01 X22.41045 Y21.79588
G01 X22.38256 Y21.70395
G01 X22.37313 Y21.60837
G01 X22.37313 Y21.11815
G01 X22.37491 Y21.10611
G01 X22.38426 Y21.01145
G01 X22.39198 Y20.85463
G01 X22.39198 Y20.76215
G01 X22.38426 Y20.60530
G01 X22.37491 Y20.51061
G01 X22.37308 Y20.49824
G01 X22.33115 Y20.35999
G01 X22.29439 Y20.27124
G01 X22.22045 Y20.13291
G01 X22.16709 Y20.05305
G01 X22.06760 Y19.93182
G01 X21.99968 Y19.86390
G01 X21.96889 Y19.83863
G01 X21.87844 Y19.76441
G01 X21.79859 Y19.71104
G01 X21.66026 Y19.63713
G01 X21.57153 Y19.60035
G01 X21.42145 Y19.55483
G01 X21.32724 Y19.53609
G01 X21.17115 Y19.52072
G01 X21.07512 Y19.52072
G01 X20.91903 Y19.53609
G01 X20.82483 Y19.55483
G01 X20.67476 Y19.60035
G01 X20.58601 Y19.63713
G01 X20.44769 Y19.71104
G01 X20.36783 Y19.76441
G01 X20.24659 Y19.86390
G01 X20.17868 Y19.93182
G01 X20.07918 Y20.05305
G01 X20.02582 Y20.13291
G01 X19.95190 Y20.27124
G01 X19.91512 Y20.35999
G01 X19.86961 Y20.51005
G01 X19.85312 Y20.59278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X19.85312 Y20.98203 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X19.85312 Y20.98203
G01 X19.88297 Y21.00936
G01 X19.95754 Y21.07998
G01 X20.05353 Y21.18793
G01 X20.06963 Y21.20987
G01 X20.07713 Y21.21988
G01 X20.10893 Y21.26161
G01 X20.14916 Y21.32128
G01 X20.19265 Y21.39468
G01 X20.22513 Y21.44386
G01 X20.25477 Y21.48427
G01 X20.32485 Y21.56489
G01 X20.35935 Y21.60139
G01 X20.36577 Y21.60761
G01 X20.43214 Y21.68371
G01 X20.43336 Y21.69003
G01 X20.44007 Y21.72564
G01 X20.45073 Y21.83873
G01 X20.45073 Y22.82323
G01 X20.45145 Y22.85274
G01 X20.45312 Y22.88701
G01 X20.45818 Y22.92104
G01 X20.46138 Y22.94037
G01 X20.46844 Y22.97924
G01 X20.47283 Y23.00692
G01 X20.47418 Y23.01685
G01 X20.47227 Y23.02851
G01 X20.46031 Y23.08538
G01 X20.45792 Y23.09445
G01 X20.44733 Y23.14314
G01 X20.44601 Y23.15061
G01 X20.43077 Y23.31881
G01 X20.42881 Y23.34837
G01 X20.43077 Y23.37799
G01 X20.44601 Y23.54614
G01 X20.44733 Y23.55361
G01 X20.46036 Y23.61137
G01 X20.49564 Y23.73819
G01 X20.51121 Y23.78030
G01 X20.53435 Y23.83456
G01 X20.57563 Y23.91957
G01 X20.61746 Y23.99018
G01 X20.65000 Y24.03943
G01 X20.68388 Y24.08563
G01 X20.76216 Y24.17565
G01 X20.80308 Y24.21832
G01 X20.81764 Y24.23204
G01 X20.93986 Y24.32975
G01 X20.97357 Y24.35482
G01 X20.98868 Y24.36321
G01 X21.14405 Y24.44677
G01 X21.14832 Y24.44906
G01 X21.19925 Y24.46811
G01 X21.33638 Y24.51243
G01 X21.36793 Y24.51982
G01 X21.40908 Y24.52795
G01 X21.42604 Y24.53044
G01 X21.53199 Y24.54449
G01 X21.60163 Y24.54789
G01 X21.66064 Y24.54789
G01 X21.73026 Y24.54449
G01 X21.83620 Y24.53044
G01 X21.88980 Y24.52086
G01 X21.89432 Y24.51982
G01 X21.92589 Y24.51243
G01 X22.06300 Y24.46811
G01 X22.11390 Y24.44906
G01 X22.11819 Y24.44680
G01 X22.27357 Y24.36323
G01 X22.28865 Y24.35482
G01 X22.32236 Y24.32975
G01 X22.44461 Y24.23207
G01 X22.45916 Y24.21832
G01 X22.50013 Y24.17563
G01 X22.57837 Y24.08563
G01 X22.61227 Y24.03941
G01 X22.64479 Y23.99021
G01 X22.68659 Y23.91959
G01 X22.72790 Y23.83458
G01 X22.75103 Y23.78030
G01 X22.76660 Y23.73819
G01 X22.80189 Y23.61137
G01 X22.81492 Y23.55361
G01 X22.81624 Y23.54614
G01 X22.83148 Y23.37799
G01 X22.83343 Y23.34837
G01 X22.83148 Y23.31881
G01 X22.81624 Y23.15061
G01 X22.81492 Y23.14314
G01 X22.80189 Y23.08538
G01 X22.76660 Y22.95856
G01 X22.75103 Y22.91645
G01 X22.72790 Y22.86219
G01 X22.68662 Y22.77718
G01 X22.64479 Y22.70657
G01 X22.61225 Y22.65732
G01 X22.57837 Y22.61111
G01 X22.50011 Y22.52112
G01 X22.47585 Y22.49483
G01 X22.46323 Y22.48234
G01 X22.45919 Y22.47845
G01 X22.45350 Y22.47289
G01 X22.45037 Y22.46979
G01 X22.36201 Y22.36042
G01 X22.34697 Y22.33707
G01 X22.34057 Y22.32732
G01 X22.30519 Y22.27436
G01 X22.20765 Y22.08559
G01 X22.20765 Y22.08556
G01 X22.20877 Y22.08084
G01 X22.24842 Y21.99336
G01 X22.26716 Y21.96090
G01 X22.32304 Y21.88290
G01 X22.39310 Y21.81729
G01 X22.41558 Y21.80327
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.20765 Y22.08556 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.20765 Y22.08556
G01 X22.20747 Y22.08523
G01 X22.20653 Y22.08472
G01 X22.11779 Y22.04797
G01 X21.94895 Y21.99676
G01 X21.94326 Y21.99562
G01 X21.94230 Y21.79991
G01 X21.99968 Y21.75282
G01 X22.06760 Y21.68490
G01 X22.16709 Y21.56367
G01 X22.22045 Y21.48381
G01 X22.29439 Y21.34548
G01 X22.33115 Y21.25676
G01 X22.37308 Y21.11846
G01 X22.37491 Y21.10611
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.37313 Y20.49860 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.37313 Y20.49860
G01 X22.37313 Y20.00835
G01 X22.38256 Y19.91277
G01 X22.41045 Y19.82085
G01 X22.45571 Y19.73614
G01 X22.51664 Y19.66187
G01 X22.59091 Y19.60093
G01 X22.67562 Y19.55567
G01 X22.76754 Y19.52778
G01 X22.86312 Y19.51836
G01 X22.91799 Y19.51836
G01 X22.91799 Y17.63269
G01 X22.83160 Y17.52746
G01 X22.77824 Y17.44757
G01 X22.69970 Y17.30063
G01 X22.66295 Y17.21189
G01 X22.64712 Y17.15974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.53073 Y22.04337 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.53073 Y22.04337
G01 X17.53050 Y22.04292
G01 X17.54431 Y21.98444
G01 X17.58424 Y21.89707
G01 X17.64045 Y21.81917
G01 X17.66527 Y21.79105
G01 X17.70794 Y21.75120
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.44327 Y20.21254 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.44327 Y20.21254
G01 X17.41190 Y20.27124
G01 X17.37512 Y20.35999
G01 X17.32961 Y20.51005
G01 X17.31312 Y20.59278
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.31312 Y21.02379 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.31312 Y21.02379
G01 X17.32961 Y21.10667
G01 X17.37512 Y21.25676
G01 X17.41190 Y21.34548
G01 X17.48582 Y21.48381
G01 X17.53918 Y21.56367
G01 X17.63868 Y21.68490
G01 X17.70502 Y21.75125
G01 X17.70794 Y21.75120
G01 X17.90045 Y21.76382
G01 X17.97683 Y21.77644
G01 X18.01213 Y21.78320
G01 X18.05023 Y21.79151
G01 X18.13370 Y21.81566
G01 X18.16783 Y21.82813
G01 X18.18958 Y21.83563
G01 X18.31292 Y21.87548
G01 X18.33949 Y21.88170
G01 X18.37919 Y21.88960
G01 X18.39753 Y21.89232
G01 X18.49227 Y21.90489
G01 X18.55361 Y21.90789
G01 X18.61269 Y21.90789
G01 X18.67398 Y21.90489
G01 X18.76872 Y21.89232
G01 X18.82676 Y21.88170
G01 X18.85338 Y21.87548
G01 X18.97667 Y21.83563
G01 X19.02572 Y21.81739
G01 X19.03181 Y21.81416
G01 X19.16991 Y21.73989
G01 X19.18589 Y21.73098
G01 X19.21876 Y21.70649
G01 X19.32887 Y21.61848
G01 X19.34042 Y21.60756
G01 X19.38137 Y21.56491
G01 X19.45150 Y21.48424
G01 X19.48111 Y21.44388
G01 X19.48157 Y21.44322
G01 X19.51365 Y21.39463
G01 X19.55714 Y21.32123
G01 X19.59224 Y21.26839
G01 X19.59732 Y21.26156
G01 X19.60425 Y21.25199
G01 X19.63468 Y21.20929
G01 X19.75076 Y21.08061
G01 X19.75213 Y21.07937
G01 X19.78454 Y21.04879
G01 X19.82440 Y21.00949
G01 X19.85312 Y20.98203
G01 X19.85312 Y20.59278
G01 X19.83666 Y20.51005
G01 X19.79115 Y20.35999
G01 X19.75483 Y20.27231
G01 X21.93895 Y18.08819
G01 X21.97125 Y18.05255
G01 X22.01476 Y17.99952
G01 X22.06813 Y17.91966
G01 X22.09160 Y17.87574
G01 X22.16023 Y17.82989
G01 X22.28903 Y17.72418
G01 X22.35695 Y17.65626
G01 X22.46267 Y17.52746
G01 X22.51603 Y17.44757
G01 X22.59457 Y17.30063
G01 X22.63132 Y17.21189
G01 X22.64712 Y17.15974
G01 X22.64712 Y16.44953
G01 X22.64392 Y16.44719
G01 X22.49841 Y16.31720
G01 X22.45208 Y16.26536
G01 X22.42630 Y16.23663
G01 X22.35391 Y16.13828
G01 X22.34918 Y16.13030
G01 X22.31669 Y16.08110
G01 X22.28492 Y16.03782
G01 X22.21075 Y15.95250
G01 X22.16981 Y15.90983
G01 X22.15673 Y15.89749
G01 X22.04055 Y15.80462
G01 X22.00727 Y15.77986
G01 X21.99178 Y15.77122
G01 X21.84504 Y15.69228
G01 X21.83984 Y15.68954
G01 X21.78982 Y15.67087
G01 X21.65962 Y15.62881
G01 X21.63051 Y15.62197
G01 X21.57242 Y15.61136
G01 X21.47209 Y15.59807
G01 X21.40664 Y15.59485
G01 X21.34763 Y15.59485
G01 X21.28215 Y15.59807
G01 X21.18182 Y15.61136
G01 X21.12373 Y15.62197
G01 X21.09462 Y15.62881
G01 X20.96442 Y15.67087
G01 X20.91441 Y15.68954
G01 X20.90920 Y15.69228
G01 X20.76247 Y15.77122
G01 X20.74697 Y15.77986
G01 X20.71368 Y15.80462
G01 X20.68218 Y15.82980
G01 X20.59752 Y15.89749
G01 X20.58444 Y15.90983
G01 X20.54352 Y15.95248
G01 X20.46933 Y16.03782
G01 X20.43758 Y16.08108
G01 X20.40507 Y16.13030
G01 X20.40037 Y16.13823
G01 X20.36544 Y16.19076
G01 X20.35333 Y16.20709
G01 X20.30443 Y16.26543
G01 X20.25569 Y16.31715
G01 X20.20517 Y16.36635
G01 X20.17253 Y16.39563
G01 X20.11022 Y16.44717
G01 X20.10712 Y16.44953
G01 X20.10712 Y17.15974
G01 X20.09132 Y17.21189
G01 X20.05457 Y17.30063
G01 X19.97603 Y17.44757
G01 X19.92267 Y17.52746
G01 X19.81695 Y17.65626
G01 X19.74903 Y17.72418
G01 X19.64497 Y17.80957
G01 X19.64497 Y18.00627
G01 X19.57880 Y18.16604
G01 X19.56107 Y18.20604
G01 X19.52991 Y18.27193
G01 X19.49402 Y18.33919
G01 X19.45767 Y18.39987
G01 X19.42021 Y18.45598
G01 X19.37891 Y18.51168
G01 X19.33918 Y18.56012
G01 X19.29303 Y18.61102
G01 X19.27202 Y18.63309
G01 X18.09392 Y19.81117
G01 X18.08617 Y19.81907
G01 X18.06252 Y19.83660
G01 X18.03796 Y19.85392
G01 X17.99821 Y19.88046
G01 X17.98086 Y19.89253
G01 X17.95076 Y19.91422
G01 X17.93334 Y19.92631
G01 X17.87601 Y19.96461
G01 X17.82346 Y19.99608
G01 X17.81764 Y19.99918
G01 X17.76268 Y20.03210
G01 X17.76161 Y20.03281
G01 X17.70154 Y20.06868
G01 X17.63606 Y20.10368
G01 X17.61442 Y20.11485
G01 X17.59849 Y20.12280
G01 X17.53354 Y20.15844
G01 X17.44327 Y20.21254
G01 X17.18297 Y20.21252
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X16.57840 Y18.53253 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X16.57840 Y18.53253
G01 X17.25054 Y18.53253
G01 X17.96499 Y17.81808
G01 X17.96499 Y17.75679
G01 X17.92524 Y17.72418
G01 X17.85732 Y17.65626
G01 X17.81213 Y17.60119
G01 X17.75160 Y17.52746
G01 X17.69824 Y17.44757
G01 X17.61970 Y17.30063
G01 X17.58295 Y17.21189
G01 X17.56712 Y17.15974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X17.56712 Y16.44953 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X17.56712 Y16.44953
G01 X17.57022 Y16.44717
G01 X17.63253 Y16.39563
G01 X17.66517 Y16.36635
G01 X17.71569 Y16.31715
G01 X17.76443 Y16.26543
G01 X17.81333 Y16.20709
G01 X17.82544 Y16.19076
G01 X17.86037 Y16.13823
G01 X17.86507 Y16.13030
G01 X17.89758 Y16.08108
G01 X17.92933 Y16.03782
G01 X18.00352 Y15.95248
G01 X18.04444 Y15.90983
G01 X18.05752 Y15.89749
G01 X18.14218 Y15.82980
G01 X18.17368 Y15.80462
G01 X18.20697 Y15.77986
G01 X18.22247 Y15.77122
G01 X18.36920 Y15.69228
G01 X18.37441 Y15.68954
G01 X18.42442 Y15.67087
G01 X18.55462 Y15.62881
G01 X18.58373 Y15.62197
G01 X18.64182 Y15.61136
G01 X18.74215 Y15.59807
G01 X18.80763 Y15.59485
G01 X18.86664 Y15.59485
G01 X18.93209 Y15.59807
G01 X19.03242 Y15.61136
G01 X19.09051 Y15.62197
G01 X19.11962 Y15.62881
G01 X19.24982 Y15.67087
G01 X19.29984 Y15.68954
G01 X19.30504 Y15.69228
G01 X19.45178 Y15.77122
G01 X19.46727 Y15.77986
G01 X19.50055 Y15.80462
G01 X19.61673 Y15.89749
G01 X19.62981 Y15.90983
G01 X19.67075 Y15.95250
G01 X19.74492 Y16.03782
G01 X19.77669 Y16.08110
G01 X19.80918 Y16.13030
G01 X19.81391 Y16.13828
G01 X19.88630 Y16.23663
G01 X19.91208 Y16.26536
G01 X19.95841 Y16.31720
G01 X20.10392 Y16.44719
G01 X20.10712 Y16.44953
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X20.10712 Y17.15974 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X20.10712 Y17.15974
G01 X20.12295 Y17.21189
G01 X20.15970 Y17.30063
G01 X20.22620 Y17.42504
G01 X19.64497 Y18.00627
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X22.64712 Y16.44953 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X22.64712 Y16.44953
G01 X22.65022 Y16.44717
G01 X22.71253 Y16.39563
G01 X22.74517 Y16.36635
G01 X22.79569 Y16.31715
G01 X22.84443 Y16.26543
G01 X22.89333 Y16.20709
G01 X22.90544 Y16.19076
G01 X22.94037 Y16.13823
G01 X22.94507 Y16.13030
G01 X22.97758 Y16.08108
G01 X23.00933 Y16.03782
G01 X23.08352 Y15.95248
G01 X23.12444 Y15.90983
G01 X23.13752 Y15.89749
G01 X23.22218 Y15.82980
G01 X23.25368 Y15.80462
G01 X23.28697 Y15.77986
G01 X23.30247 Y15.77122
G01 X23.44920 Y15.69228
G01 X23.45441 Y15.68954
G01 X23.50442 Y15.67087
G01 X23.63462 Y15.62881
G01 X23.66373 Y15.62197
G01 X23.72182 Y15.61136
G01 X23.82215 Y15.59807
G01 X23.88763 Y15.59485
G01 X23.94664 Y15.59485
G01 X24.01209 Y15.59807
G01 X24.11242 Y15.61136
G01 X24.17051 Y15.62197
G01 X24.19962 Y15.62881
G01 X24.32982 Y15.67087
G01 X24.37984 Y15.68954
G01 X24.38504 Y15.69228
G01 X24.53178 Y15.77122
G01 X24.54727 Y15.77986
G01 X24.58055 Y15.80462
G01 X24.69673 Y15.89749
G01 X24.70981 Y15.90983
G01 X24.75075 Y15.95250
G01 X24.82492 Y16.03782
G01 X24.85669 Y16.08110
G01 X24.88918 Y16.13030
G01 X24.89391 Y16.13828
G01 X24.96630 Y16.23663
G01 X24.99208 Y16.26536
G01 X25.03841 Y16.31720
G01 X25.18392 Y16.44719
G01 X25.18712 Y16.44953
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.60000 ( retract )

G00 X25.18712 Y17.03922 ( rapid move to begin. )
G01 F200.00000
( Mill infeed pass 1/1 )
G01 Z-0.20000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X25.18712 Y17.03922
G01 X25.19032 Y17.04155
G01 X25.33584 Y17.17155
G01 X25.38209 Y17.22329
G01 X25.38286 Y17.22415
G01 X25.40790 Y17.25204
G01 X25.48037 Y17.35052
G01 X25.48507 Y17.35844
G01 X25.51758 Y17.40764
G01 X25.54933 Y17.45095
G01 X25.62352 Y17.53627
G01 X25.66447 Y17.57897
G01 X25.67752 Y17.59126
G01 X25.79370 Y17.68412
G01 X25.82697 Y17.70889
G01 X25.84247 Y17.71752
G01 X25.98920 Y17.79647
G01 X25.99441 Y17.79921
G01 X26.04442 Y17.81788
G01 X26.17462 Y17.85994
G01 X26.20373 Y17.86677
G01 X26.24412 Y17.87478
G01 X26.26182 Y17.87739
G01 X26.36215 Y17.89068
G01 X26.42763 Y17.89390
G01 X26.48664 Y17.89390
G01 X26.54313 Y17.89113
G01 X26.65423 Y17.89568
G01 X26.66073 Y17.89652
G01 X26.66543 Y17.89962
G01 X26.69720 Y17.92088
G01 X26.79007 Y17.99692
G01 X28.00289 Y19.20975
G01 X28.03647 Y19.24622
G01 X28.04693 Y19.25854
G01 X28.14409 Y19.41391
G01 X28.16057 Y19.45049
G01 X28.20871 Y19.68389
G01 X28.21816 Y19.72964
G01 X28.16964 Y19.79684
G01 X28.14483 Y19.82496
G01 X28.10279 Y19.86405
G01 X28.10279 Y19.86408
G01 X27.91242 Y19.85217

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z30.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )