supply: Optimize pcb2gcode settings, Add G-code; Add G-code for flat milling
This commit is contained in:
jonny
parent
5cbfe96bff
commit
076bdc3cad
@ -7,17 +7,25 @@
|
|||||||
# https://ncviewer.com/
|
# https://ncviewer.com/
|
||||||
|
|
||||||
|
|
||||||
|
# notes about kicad export:
|
||||||
|
# - dont tick "use gerber X2 format (recommended)" to prevent many unsupported warnings
|
||||||
|
# - dont tick unnecessary plot xx options e.g. "plot footprint text" it might cause hangup
|
||||||
|
# - if oval holes are present select "Use alternative drill mode" option in generate drill files menu
|
||||||
|
|
||||||
|
|
||||||
# === CONFIG ===
|
# === CONFIG ===
|
||||||
# Configuration file generated by pcb2gcodeGUI version 0.1 on Wed Apr 6 15:40:16 2022
|
# Configuration file generated by pcb2gcodeGUI version 0.1 on Wed Apr 6 15:40:16 2022
|
||||||
# stopped using gui and customized parameters manually since then...
|
# stopped using gui and customized parameters manually since then...
|
||||||
back=../export/power-supply-board_v1.0-B_Cu.gbr
|
|
||||||
front=../export/power-supply-board_v1.0-F_Cu.gbr
|
|
||||||
outline=../export/power-supply-board_v1.0-Edge_Cuts.gbr
|
|
||||||
#note: running for each drill file separately and merging the gcode manually (4 mounting holes are in a separate gerber file)
|
|
||||||
drill=../export/power-supply-board_v1.0-PTH.drl
|
|
||||||
#drill=../export/power-supply-board_v1.0-NPTH.drl
|
|
||||||
|
|
||||||
output-dir=./out
|
|
||||||
|
#note: in/out filepaths are added by the run-pcb2gcode.sh script now, thus commented out here:
|
||||||
|
#back=../export/V2.1_board-ecar_isolated-B_Cu.gbr
|
||||||
|
#front=../export/V2.1_board-ecar_isolated-F_Cu.gbr
|
||||||
|
#outline=../export/V2.1_board-ecar_isolated-Edge_Cuts.gbr
|
||||||
|
##note: running for each drill file separately and merging the gcode manually (4 mounting holes are in a separate gerber file)
|
||||||
|
#drill=../export/V2.1_board-ecar_isolated-PTH.drl
|
||||||
|
##drill=../export/V2.1_board-ecar_isolated-NPTH.drl
|
||||||
|
#output-dir=./out
|
||||||
|
|
||||||
# Common options
|
# Common options
|
||||||
metric=true
|
metric=true
|
||||||
@ -39,9 +47,10 @@ zsafe=2.6000 #head mounting screw=1.8 #3mm to be able to cross mounting screws
|
|||||||
extra-passes=0
|
extra-passes=0
|
||||||
mill-feed=400 #default 600mm/min
|
mill-feed=400 #default 600mm/min
|
||||||
mill-speed=20000
|
mill-speed=20000
|
||||||
offset=0.500 #intentional bigger offset than necessary, using 0.4 there were almost no small strips beeing left over between insolation lines.
|
offset=0.49 #intentional bigger offset than necessary, using 0.4 there were almost no small strips beeing left over between insolation lines.
|
||||||
voronoi=false
|
voronoi=false
|
||||||
zwork=-0.2000 #usin 60degree cutter resulted in ~0.42mm line
|
#zwork=-0.2000 #using 60degree cutter resulted in ~0.42mm line
|
||||||
|
zwork=-0.3600 #using 45degree cutter calculates to ~0.3mm line
|
||||||
|
|
||||||
# Drill options
|
# Drill options
|
||||||
drill-feed=200
|
drill-feed=200
|
||||||
@ -53,19 +62,19 @@ nog81=false
|
|||||||
nog91-1=true
|
nog91-1=true
|
||||||
onedrill=false
|
onedrill=false
|
||||||
zdrill=-1.900 #1.75 slightly too short
|
zdrill=-1.900 #1.75 slightly too short
|
||||||
drills-available=0.8, 1, 1.2, 1.5, 2, 3
|
drills-available=0.8, 1, 1.5, 2, 3
|
||||||
|
|
||||||
# Outline options
|
# Outline options
|
||||||
bridges=1.0000
|
bridges=1.0000
|
||||||
bridgesnum=2
|
bridgesnum=3
|
||||||
cut-feed=200
|
cut-feed=200
|
||||||
cut-infeed=0.5000
|
cut-infeed=0.5000
|
||||||
cut-side=back
|
cut-side=back
|
||||||
cut-speed=10000
|
cut-speed=20000
|
||||||
cut-vertfeed=60
|
cut-vertfeed=60
|
||||||
cutter-diameter=1.0000
|
cutter-diameter=1.0000
|
||||||
fill-outline=true
|
fill-outline=true
|
||||||
zbridges=-0.6000
|
zbridges=-0.9000
|
||||||
zcut=-1.9000 #actual: 1.7
|
zcut=-1.9000 #actual: 1.7
|
||||||
|
|
||||||
# Autoleveller options
|
# Autoleveller options
|
||||||
|
|||||||
15332
power-supply-board_v1.0/pcb2gcode/out/back.ngc
Normal file
15332
power-supply-board_v1.0/pcb2gcode/out/back.ngc
Normal file
File diff suppressed because it is too large
Load Diff
280
power-supply-board_v1.0/pcb2gcode/out/drill.ngc
Normal file
280
power-supply-board_v1.0/pcb2gcode/out/drill.ngc
Normal file
@ -0,0 +1,280 @@
|
|||||||
|
( pcb2gcode 2.5.0 )
|
||||||
|
( Software-independent Gcode )
|
||||||
|
|
||||||
|
( This file uses 4 drill bit sizes. )
|
||||||
|
( Bit sizes: [0.8mm] [1mm] [1.5mm] [2mm] )
|
||||||
|
|
||||||
|
G94 (Millimeters per minute feed rate.)
|
||||||
|
G21 (Units == Millimeters.)
|
||||||
|
G90 (Absolute coordinates.)
|
||||||
|
G00 S20000 (RPM spindle speed.)
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract)
|
||||||
|
T1
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000
|
||||||
|
(MSG, Change tool bit to drill size 0.8mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 (Spindle on clockwise.)
|
||||||
|
G0 Z2.60000
|
||||||
|
G04 P1.00000
|
||||||
|
|
||||||
|
G81 R2.60000 Z-1.90000 F200.00000 X-81.32220 Y61.26596
|
||||||
|
X-81.32220 Y59.26596
|
||||||
|
X-78.19820 Y56.29396
|
||||||
|
X-76.93820 Y59.13996
|
||||||
|
X-76.93820 Y61.67996
|
||||||
|
X-76.93820 Y64.21996
|
||||||
|
X-76.93820 Y66.75996
|
||||||
|
X-76.62320 Y71.65096
|
||||||
|
X-60.79920 Y79.14396
|
||||||
|
X-56.81120 Y82.06496
|
||||||
|
X-60.79920 Y68.98396
|
||||||
|
X-56.68420 Y68.09496
|
||||||
|
X-37.25320 Y64.66596
|
||||||
|
X-21.09320 Y54.11696
|
||||||
|
X-16.81520 Y63.17596
|
||||||
|
X-7.41720 Y63.12396
|
||||||
|
X-7.41720 Y58.12396
|
||||||
|
X-16.81520 Y58.17596
|
||||||
|
X-16.09320 Y54.11696
|
||||||
|
X-8.68720 Y45.73496
|
||||||
|
X-6.68720 Y45.73496
|
||||||
|
X-6.94020 Y38.88496
|
||||||
|
X-9.44020 Y38.88496
|
||||||
|
X-13.76720 Y38.88496
|
||||||
|
X-16.26720 Y38.88496
|
||||||
|
X-13.76720 Y45.73496
|
||||||
|
X-16.26720 Y45.73496
|
||||||
|
X-28.99820 Y39.04596
|
||||||
|
X-28.99820 Y43.87196
|
||||||
|
X-46.84020 Y45.02896
|
||||||
|
X-51.35020 Y52.58696
|
||||||
|
X-55.41420 Y56.65096
|
||||||
|
X-64.85120 Y49.95596
|
||||||
|
X-67.43120 Y53.25796
|
||||||
|
X-65.06620 Y56.67596
|
||||||
|
X-65.06620 Y61.67596
|
||||||
|
X-69.31820 Y66.75996
|
||||||
|
X-69.31820 Y64.21996
|
||||||
|
X-69.31820 Y61.67996
|
||||||
|
X-69.31820 Y59.13996
|
||||||
|
X-68.03820 Y56.29396
|
||||||
|
X-72.43120 Y53.25796
|
||||||
|
X-75.01120 Y49.95596
|
||||||
|
X-78.05920 Y44.65096
|
||||||
|
X-80.81420 Y44.59996
|
||||||
|
X-83.35420 Y44.59996
|
||||||
|
X-83.22720 Y40.15496
|
||||||
|
X-81.22720 Y40.15496
|
||||||
|
X-78.05920 Y42.11096
|
||||||
|
X-78.02020 Y39.37896
|
||||||
|
X-78.04920 Y35.23896
|
||||||
|
X-80.58920 Y35.23896
|
||||||
|
X-83.12920 Y35.23896
|
||||||
|
X-85.66920 Y35.23896
|
||||||
|
X-88.47320 Y35.22396
|
||||||
|
X-88.72720 Y32.64396
|
||||||
|
X-88.72720 Y27.64396
|
||||||
|
X-85.66920 Y27.61896
|
||||||
|
X-83.12920 Y27.61896
|
||||||
|
X-83.39320 Y24.04796
|
||||||
|
X-91.48220 Y11.93596
|
||||||
|
X-80.58920 Y27.61896
|
||||||
|
X-78.04920 Y27.61896
|
||||||
|
X-73.23320 Y24.04796
|
||||||
|
X-74.31220 Y19.45396
|
||||||
|
X-65.82820 Y9.92896
|
||||||
|
G80
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract)
|
||||||
|
T3
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000
|
||||||
|
(MSG, Change tool bit to drill size 1mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 (Spindle on clockwise.)
|
||||||
|
G0 Z2.60000
|
||||||
|
G04 P1.00000
|
||||||
|
|
||||||
|
G81 R2.60000 Z-1.90000 F200.00000 X-90.44920 Y18.78496
|
||||||
|
X-90.44920 Y16.28496
|
||||||
|
X-82.57720 Y12.70896
|
||||||
|
X-80.03720 Y12.70896
|
||||||
|
X-77.49720 Y12.70896
|
||||||
|
X-78.31320 Y20.67496
|
||||||
|
X-80.85320 Y20.67496
|
||||||
|
X-83.39320 Y20.67496
|
||||||
|
X-88.94220 Y24.02596
|
||||||
|
X-89.19620 Y39.39296
|
||||||
|
X-89.83120 Y44.25896
|
||||||
|
X-89.83120 Y46.75896
|
||||||
|
X-89.83120 Y53.48996
|
||||||
|
X-89.83120 Y55.98996
|
||||||
|
X-81.44920 Y65.68196
|
||||||
|
X-81.59320 Y71.58396
|
||||||
|
X-81.59320 Y74.08396
|
||||||
|
X-81.59320 Y76.58396
|
||||||
|
X-81.59320 Y79.08396
|
||||||
|
X-70.60320 Y75.43596
|
||||||
|
X-68.06320 Y75.43596
|
||||||
|
X-44.49220 Y61.72996
|
||||||
|
X-44.49220 Y54.62996
|
||||||
|
X-55.06820 Y49.79296
|
||||||
|
X-60.06820 Y49.79296
|
||||||
|
X-61.63720 Y43.07596
|
||||||
|
X-54.65220 Y40.39496
|
||||||
|
X-49.65220 Y40.39496
|
||||||
|
X-42.89020 Y42.00996
|
||||||
|
X-39.49020 Y42.00996
|
||||||
|
X-33.31620 Y41.55196
|
||||||
|
X-37.79020 Y38.30996
|
||||||
|
X-41.19020 Y38.30996
|
||||||
|
X-44.59020 Y38.30996
|
||||||
|
X-49.37620 Y33.88496
|
||||||
|
X-52.77620 Y33.88496
|
||||||
|
X-56.17620 Y33.88496
|
||||||
|
X-54.47620 Y30.18496
|
||||||
|
X-51.07620 Y30.18496
|
||||||
|
X-42.46020 Y16.73796
|
||||||
|
X-42.46020 Y11.73796
|
||||||
|
X-56.43020 Y10.80496
|
||||||
|
X-69.89220 Y23.89896
|
||||||
|
X-59.47820 Y22.24796
|
||||||
|
X-56.43020 Y17.90496
|
||||||
|
X-44.58420 Y31.75896
|
||||||
|
X-39.58420 Y31.75896
|
||||||
|
X-33.18920 Y36.59896
|
||||||
|
X-26.88820 Y26.93296
|
||||||
|
X-33.31620 Y24.09696
|
||||||
|
X-33.31620 Y17.09696
|
||||||
|
X-24.17220 Y18.55096
|
||||||
|
X-16.67220 Y18.55096
|
||||||
|
X-9.18620 Y16.51696
|
||||||
|
X-9.18620 Y14.51696
|
||||||
|
X-9.18620 Y15.40585
|
||||||
|
X-9.18620 Y15.85030
|
||||||
|
X-9.18620 Y14.96141
|
||||||
|
X-9.18620 Y16.07252
|
||||||
|
X-9.18620 Y15.62807
|
||||||
|
X-9.18620 Y15.18363
|
||||||
|
X-9.18620 Y14.73918
|
||||||
|
X-9.18620 Y16.29474
|
||||||
|
X-7.18620 Y10.81696
|
||||||
|
X-5.18620 Y10.81696
|
||||||
|
X-6.07509 Y10.81696
|
||||||
|
X-6.51953 Y10.81696
|
||||||
|
X-5.63064 Y10.81696
|
||||||
|
X-6.74176 Y10.81696
|
||||||
|
X-6.29731 Y10.81696
|
||||||
|
X-5.85287 Y10.81696
|
||||||
|
X-5.40842 Y10.81696
|
||||||
|
X-6.96398 Y10.81696
|
||||||
|
X-3.18620 Y14.51696
|
||||||
|
X-3.18620 Y16.51696
|
||||||
|
X-3.18620 Y15.62807
|
||||||
|
X-3.18620 Y15.18363
|
||||||
|
X-3.18620 Y16.07252
|
||||||
|
X-3.18620 Y14.96141
|
||||||
|
X-3.18620 Y15.40585
|
||||||
|
X-3.18620 Y15.85030
|
||||||
|
X-3.18620 Y16.29474
|
||||||
|
X-3.18620 Y14.73918
|
||||||
|
X-14.18820 Y26.93296
|
||||||
|
X-4.61420 Y33.42396
|
||||||
|
X-6.90020 Y54.75996
|
||||||
|
X-11.98020 Y54.75996
|
||||||
|
X-3.59820 Y68.72996
|
||||||
|
X-27.90020 Y59.58596
|
||||||
|
X-32.90020 Y59.58596
|
||||||
|
G80
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract)
|
||||||
|
T8
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000
|
||||||
|
(MSG, Change tool bit to drill size 1.5mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 (Spindle on clockwise.)
|
||||||
|
G0 Z2.60000
|
||||||
|
G04 P1.00000
|
||||||
|
|
||||||
|
G81 R2.60000 Z-1.90000 F200.00000 X-86.06420 Y5.99196
|
||||||
|
X-82.56420 Y5.99196
|
||||||
|
X-79.06420 Y5.99196
|
||||||
|
X-75.56420 Y5.99196
|
||||||
|
X-68.03020 Y5.99196
|
||||||
|
X-64.53020 Y5.99196
|
||||||
|
X-61.03020 Y5.99196
|
||||||
|
X-57.53020 Y5.99196
|
||||||
|
X-50.02420 Y5.99196
|
||||||
|
X-46.52420 Y5.99196
|
||||||
|
X-43.02420 Y5.99196
|
||||||
|
X-35.54620 Y5.99196
|
||||||
|
X-32.04620 Y5.99196
|
||||||
|
X-28.54620 Y5.99196
|
||||||
|
X-6.46520 Y27.92096
|
||||||
|
X-6.46520 Y24.42096
|
||||||
|
X-12.91820 Y10.67696
|
||||||
|
X-10.54020 Y5.99196
|
||||||
|
X-14.04020 Y5.99196
|
||||||
|
X-17.54020 Y5.99196
|
||||||
|
X-21.04020 Y5.99196
|
||||||
|
X-28.15820 Y10.67696
|
||||||
|
X-39.92020 Y22.36096
|
||||||
|
X-55.16020 Y22.36096
|
||||||
|
X-64.93120 Y31.30996
|
||||||
|
X-74.93120 Y28.80996
|
||||||
|
X-74.93120 Y33.80996
|
||||||
|
X-74.93120 Y40.49396
|
||||||
|
X-74.93120 Y45.49396
|
||||||
|
X-64.93120 Y42.99396
|
||||||
|
X-49.57220 Y49.79296
|
||||||
|
X-34.33220 Y49.79296
|
||||||
|
X-41.75920 Y68.06796
|
||||||
|
X-45.25920 Y68.06796
|
||||||
|
X-48.75920 Y68.06796
|
||||||
|
X-52.25920 Y68.06796
|
||||||
|
X-41.75920 Y82.03796
|
||||||
|
X-45.25920 Y82.03796
|
||||||
|
X-48.75920 Y82.03796
|
||||||
|
X-52.25920 Y82.03796
|
||||||
|
G80
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract)
|
||||||
|
T11
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000
|
||||||
|
(MSG, Change tool bit to drill size 2mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 (Spindle on clockwise.)
|
||||||
|
G0 Z2.60000
|
||||||
|
G04 P1.00000
|
||||||
|
|
||||||
|
G81 R2.60000 Z-1.90000 F200.00000 X-24.83020 Y31.25096
|
||||||
|
X-23.33020 Y31.25096
|
||||||
|
X-23.93020 Y31.25096
|
||||||
|
X-24.23020 Y31.25096
|
||||||
|
X-23.63020 Y31.25096
|
||||||
|
X-24.53020 Y31.25096
|
||||||
|
X-16.83020 Y31.25096
|
||||||
|
X-15.33020 Y31.25096
|
||||||
|
X-15.93020 Y31.25096
|
||||||
|
X-16.23020 Y31.25096
|
||||||
|
X-15.63020 Y31.25096
|
||||||
|
X-16.53020 Y31.25096
|
||||||
|
X-21.63220 Y67.09896
|
||||||
|
X-21.63220 Y80.59896
|
||||||
|
G80
|
||||||
|
|
||||||
|
G00 Z30.000 ( All done -- retract )
|
||||||
|
|
||||||
|
M5 (Spindle off.)
|
||||||
|
G04 P1.000000
|
||||||
|
M9 (Coolant off.)
|
||||||
|
M2 (Program end.)
|
||||||
|
|
||||||
19344
power-supply-board_v1.0/pcb2gcode/out/front.ngc
Normal file
19344
power-supply-board_v1.0/pcb2gcode/out/front.ngc
Normal file
File diff suppressed because it is too large
Load Diff
39
power-supply-board_v1.0/pcb2gcode/out/npth.ngc
Normal file
39
power-supply-board_v1.0/pcb2gcode/out/npth.ngc
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
( pcb2gcode 2.5.0 )
|
||||||
|
( Software-independent Gcode )
|
||||||
|
|
||||||
|
( This file uses 1 drill bit sizes. )
|
||||||
|
( Bit sizes: [2mm] )
|
||||||
|
|
||||||
|
G94 (Millimeters per minute feed rate.)
|
||||||
|
G21 (Units == Millimeters.)
|
||||||
|
G90 (Absolute coordinates.)
|
||||||
|
G00 S20000 (RPM spindle speed.)
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract)
|
||||||
|
T1
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000
|
||||||
|
(MSG, Change tool bit to drill size 2mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 (Spindle on clockwise.)
|
||||||
|
G0 Z2.60000
|
||||||
|
G04 P1.00000
|
||||||
|
|
||||||
|
G81 R2.60000 Z-1.90000 F200.00000 X-92.11720 Y3.83296
|
||||||
|
X-66.20920 Y37.23396
|
||||||
|
X-92.11720 Y83.33496
|
||||||
|
X-58.05620 Y65.22496
|
||||||
|
X-29.96320 Y68.11996
|
||||||
|
X-3.97920 Y83.46196
|
||||||
|
X-21.63220 Y24.02596
|
||||||
|
X-3.97920 Y3.83296
|
||||||
|
G80
|
||||||
|
|
||||||
|
G00 Z30.000 ( All done -- retract )
|
||||||
|
|
||||||
|
M5 (Spindle off.)
|
||||||
|
G04 P1.000000
|
||||||
|
M9 (Coolant off.)
|
||||||
|
M2 (Program end.)
|
||||||
|
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
<?xml version="1.0" standalone="no"?>
|
||||||
|
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
|
||||||
|
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
|
||||||
|
<svg width="362.741" height="330.798" viewBox="0 0 7557.1 6891.63" version="1.1"
|
||||||
|
xmlns="http://www.w3.org/2000/svg"
|
||||||
|
xmlns:xlink="http://www.w3.org/1999/xlink">
|
||||||
|
<circle cx="7253.32" cy="6589.82" r="78.7402" style=""/>
|
||||||
|
<circle cx="5213.32" cy="3959.82" r="78.7402" style=""/>
|
||||||
|
<circle cx="7253.32" cy="329.822" r="78.7402" style=""/>
|
||||||
|
<circle cx="4571.35" cy="1755.81" r="78.7402" style=""/>
|
||||||
|
<circle cx="2359.31" cy="1527.85" r="78.7402" style=""/>
|
||||||
|
<circle cx="313.323" cy="319.822" r="78.7402" style=""/>
|
||||||
|
<circle cx="1703.32" cy="4999.82" r="78.7402" style=""/>
|
||||||
|
<circle cx="313.323" cy="6589.82" r="78.7402" style=""/>
|
||||||
|
</svg>
|
||||||
|
After Width: | Height: | Size: 760 B |
217
power-supply-board_v1.0/pcb2gcode/out/original_drill_normal.svg
Normal file
217
power-supply-board_v1.0/pcb2gcode/out/original_drill_normal.svg
Normal file
@ -0,0 +1,217 @@
|
|||||||
|
<?xml version="1.0" standalone="no"?>
|
||||||
|
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
|
||||||
|
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
|
||||||
|
<svg width="362.741" height="330.798" viewBox="0 0 7557.1 6891.63" version="1.1"
|
||||||
|
xmlns="http://www.w3.org/2000/svg"
|
||||||
|
xmlns:xlink="http://www.w3.org/1999/xlink">
|
||||||
|
<circle cx="6403.32" cy="2067.54" r="31.4961" style=""/>
|
||||||
|
<circle cx="6403.32" cy="2225.02" r="31.4961" style=""/>
|
||||||
|
<circle cx="6157.34" cy="2459.03" r="31.4961" style=""/>
|
||||||
|
<circle cx="6058.13" cy="2234.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="6058.13" cy="2034.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="6058.13" cy="1834.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="6058.13" cy="1634.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="6033.32" cy="1249.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="4787.34" cy="659.822" r="31.4961" style=""/>
|
||||||
|
<circle cx="4473.32" cy="429.822" r="31.4961" style=""/>
|
||||||
|
<circle cx="4787.34" cy="1459.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="4463.32" cy="1529.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="2933.32" cy="1799.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="1660.88" cy="2630.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="1324.03" cy="1917.14" r="31.4961" style=""/>
|
||||||
|
<circle cx="584.031" cy="1921.24" r="31.4961" style=""/>
|
||||||
|
<circle cx="584.031" cy="2314.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="1324.03" cy="2310.85" r="31.4961" style=""/>
|
||||||
|
<circle cx="1267.18" cy="2630.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="684.031" cy="3290.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="526.551" cy="3290.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="546.472" cy="3829.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="743.323" cy="3829.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="1084.03" cy="3829.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="1280.88" cy="3829.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="1084.03" cy="3290.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="1280.88" cy="3290.45" r="31.4961" style=""/>
|
||||||
|
<circle cx="2283.32" cy="3817.14" r="31.4961" style=""/>
|
||||||
|
<circle cx="2283.32" cy="3437.14" r="31.4961" style=""/>
|
||||||
|
<circle cx="3688.2" cy="3346.04" r="31.4961" style=""/>
|
||||||
|
<circle cx="4043.32" cy="2750.92" r="31.4961" style=""/>
|
||||||
|
<circle cx="4363.32" cy="2430.92" r="31.4961" style=""/>
|
||||||
|
<circle cx="5106.39" cy="2958.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="5309.54" cy="2698.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="5123.32" cy="2428.96" r="31.4961" style=""/>
|
||||||
|
<circle cx="5123.32" cy="2035.25" r="31.4961" style=""/>
|
||||||
|
<circle cx="5458.13" cy="1634.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="5458.13" cy="1834.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="5458.13" cy="2034.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="5458.13" cy="2234.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="5357.34" cy="2459.03" r="31.4961" style=""/>
|
||||||
|
<circle cx="5703.24" cy="2698.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="5906.39" cy="2958.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="6146.39" cy="3375.81" r="31.4961" style=""/>
|
||||||
|
<circle cx="6363.32" cy="3379.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="6563.32" cy="3379.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="6553.32" cy="3729.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="6395.84" cy="3729.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="6146.39" cy="3575.81" r="31.4961" style=""/>
|
||||||
|
<circle cx="6143.32" cy="3790.92" r="31.4961" style=""/>
|
||||||
|
<circle cx="6145.61" cy="4116.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6345.61" cy="4116.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6545.61" cy="4116.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6745.61" cy="4116.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6966.39" cy="4118.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="6986.39" cy="4321.24" r="31.4961" style=""/>
|
||||||
|
<circle cx="6986.39" cy="4714.94" r="31.4961" style=""/>
|
||||||
|
<circle cx="6745.61" cy="4716.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6545.61" cy="4716.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6566.39" cy="4998.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="7203.32" cy="5951.79" r="31.4961" style=""/>
|
||||||
|
<circle cx="6345.61" cy="4716.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="6145.61" cy="4716.91" r="31.4961" style=""/>
|
||||||
|
<circle cx="5766.39" cy="4998.09" r="31.4961" style=""/>
|
||||||
|
<circle cx="5851.35" cy="5359.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="5183.32" cy="6109.82" r="31.4961" style=""/>
|
||||||
|
<circle cx="7121.98" cy="5412.5" r="39.3701" style=""/>
|
||||||
|
<circle cx="7121.98" cy="5609.35" r="39.3701" style=""/>
|
||||||
|
<circle cx="6502.14" cy="5890.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="6302.14" cy="5890.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="6102.14" cy="5890.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="6166.39" cy="5263.68" r="39.3701" style=""/>
|
||||||
|
<circle cx="6366.39" cy="5263.68" r="39.3701" style=""/>
|
||||||
|
<circle cx="6566.39" cy="5263.68" r="39.3701" style=""/>
|
||||||
|
<circle cx="7003.32" cy="4999.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="7023.32" cy="3789.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="7073.32" cy="3406.67" r="39.3701" style=""/>
|
||||||
|
<circle cx="7073.32" cy="3209.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="7073.32" cy="2679.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="7073.32" cy="2482.97" r="39.3701" style=""/>
|
||||||
|
<circle cx="6413.32" cy="1719.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="6424.66" cy="1255.1" r="39.3701" style=""/>
|
||||||
|
<circle cx="6424.66" cy="1058.25" r="39.3701" style=""/>
|
||||||
|
<circle cx="6424.66" cy="861.397" r="39.3701" style=""/>
|
||||||
|
<circle cx="6424.66" cy="664.546" r="39.3701" style=""/>
|
||||||
|
<circle cx="5559.31" cy="951.79" r="39.3701" style=""/>
|
||||||
|
<circle cx="5359.31" cy="951.79" r="39.3701" style=""/>
|
||||||
|
<circle cx="3503.32" cy="2031" r="39.3701" style=""/>
|
||||||
|
<circle cx="3503.32" cy="2590.06" r="39.3701" style=""/>
|
||||||
|
<circle cx="4336.08" cy="2970.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="4729.78" cy="2970.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="4853.32" cy="3499.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="4303.32" cy="3710.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="3909.62" cy="3710.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="3377.18" cy="3583.76" r="39.3701" style=""/>
|
||||||
|
<circle cx="3109.46" cy="3583.76" r="39.3701" style=""/>
|
||||||
|
<circle cx="2623.32" cy="3619.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="2975.61" cy="3875.1" r="39.3701" style=""/>
|
||||||
|
<circle cx="3243.32" cy="3875.1" r="39.3701" style=""/>
|
||||||
|
<circle cx="3511.04" cy="3875.1" r="39.3701" style=""/>
|
||||||
|
<circle cx="3887.89" cy="4223.52" r="39.3701" style=""/>
|
||||||
|
<circle cx="4155.61" cy="4223.52" r="39.3701" style=""/>
|
||||||
|
<circle cx="4423.32" cy="4223.52" r="39.3701" style=""/>
|
||||||
|
<circle cx="4289.46" cy="4514.86" r="39.3701" style=""/>
|
||||||
|
<circle cx="4021.75" cy="4514.86" r="39.3701" style=""/>
|
||||||
|
<circle cx="3343.32" cy="5573.68" r="39.3701" style=""/>
|
||||||
|
<circle cx="3343.32" cy="5967.38" r="39.3701" style=""/>
|
||||||
|
<circle cx="4443.32" cy="6040.85" r="39.3701" style=""/>
|
||||||
|
<circle cx="5503.32" cy="5009.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="4683.32" cy="5139.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="4443.32" cy="5481.79" r="39.3701" style=""/>
|
||||||
|
<circle cx="3510.57" cy="4390.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="3116.87" cy="4390.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="2613.32" cy="4009.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="2117.18" cy="4770.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="2623.32" cy="4994.23" r="39.3701" style=""/>
|
||||||
|
<circle cx="2623.32" cy="5545.41" r="39.3701" style=""/>
|
||||||
|
<circle cx="1903.32" cy="5430.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="1312.77" cy="5430.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5591.08" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5748.56" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5678.57" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5643.58" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5713.57" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5626.08" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5661.07" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5696.07" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5731.06" r="39.3701" style=""/>
|
||||||
|
<circle cx="723.323" cy="5608.58" r="39.3701" style=""/>
|
||||||
|
<circle cx="565.843" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="408.362" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="478.353" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="513.349" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="443.358" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="530.847" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="495.851" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="460.856" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="425.86" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="548.345" cy="6039.9" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5748.56" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5591.08" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5661.07" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5696.07" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5626.08" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5713.57" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5678.57" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5643.58" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5608.58" r="39.3701" style=""/>
|
||||||
|
<circle cx="250.882" cy="5731.06" r="39.3701" style=""/>
|
||||||
|
<circle cx="1117.18" cy="4770.92" r="39.3701" style=""/>
|
||||||
|
<circle cx="363.323" cy="4259.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="543.323" cy="2579.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="943.323" cy="2579.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="283.323" cy="1479.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="2196.87" cy="2199.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="2590.57" cy="2199.82" r="39.3701" style=""/>
|
||||||
|
<circle cx="6776.71" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="6501.12" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="6225.53" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="5949.94" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="5356.71" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="5081.12" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="4805.53" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="4529.94" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="3938.91" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="3663.32" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="3387.73" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="2798.91" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="2523.32" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="2247.73" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="509.071" cy="4693.13" r="59.0551" style=""/>
|
||||||
|
<circle cx="509.071" cy="4968.72" r="59.0551" style=""/>
|
||||||
|
<circle cx="1017.18" cy="6050.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="829.937" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="1105.53" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="1381.12" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="1656.71" cy="6419.82" r="59.0551" style=""/>
|
||||||
|
<circle cx="2217.18" cy="6050.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="3143.32" cy="5130.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="4343.32" cy="5130.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="5112.69" cy="4426.28" r="59.0551" style=""/>
|
||||||
|
<circle cx="5900.09" cy="4623.13" r="59.0551" style=""/>
|
||||||
|
<circle cx="5900.09" cy="4229.43" r="59.0551" style=""/>
|
||||||
|
<circle cx="5900.09" cy="3703.13" r="59.0551" style=""/>
|
||||||
|
<circle cx="5900.09" cy="3309.43" r="59.0551" style=""/>
|
||||||
|
<circle cx="5112.69" cy="3506.28" r="59.0551" style=""/>
|
||||||
|
<circle cx="3903.32" cy="2970.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="2703.32" cy="2970.92" r="59.0551" style=""/>
|
||||||
|
<circle cx="3288.13" cy="1531.95" r="59.0551" style=""/>
|
||||||
|
<circle cx="3563.72" cy="1531.95" r="59.0551" style=""/>
|
||||||
|
<circle cx="3839.31" cy="1531.95" r="59.0551" style=""/>
|
||||||
|
<circle cx="4114.9" cy="1531.95" r="59.0551" style=""/>
|
||||||
|
<circle cx="3288.13" cy="431.948" r="59.0551" style=""/>
|
||||||
|
<circle cx="3563.72" cy="431.948" r="59.0551" style=""/>
|
||||||
|
<circle cx="3839.31" cy="431.948" r="59.0551" style=""/>
|
||||||
|
<circle cx="4114.9" cy="431.948" r="59.0551" style=""/>
|
||||||
|
<circle cx="1955.13" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1837.02" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1884.27" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1907.89" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1860.65" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1931.51" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1325.21" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1207.1" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1254.35" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1277.97" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1230.72" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1301.59" cy="4430.92" r="78.7402" style=""/>
|
||||||
|
<circle cx="1703.32" cy="1608.25" r="78.7402" style=""/>
|
||||||
|
<circle cx="1703.32" cy="545.255" r="78.7402" style=""/>
|
||||||
|
</svg>
|
||||||
|
After Width: | Height: | Size: 12 KiB |
241
power-supply-board_v1.0/pcb2gcode/out/outline.ngc
Normal file
241
power-supply-board_v1.0/pcb2gcode/out/outline.ngc
Normal file
@ -0,0 +1,241 @@
|
|||||||
|
( pcb2gcode 2.5.0 )
|
||||||
|
( Software-independent Gcode )
|
||||||
|
|
||||||
|
G94 ( Millimeters per minute feed rate. )
|
||||||
|
G21 ( Units == Millimeters. )
|
||||||
|
|
||||||
|
G90 ( Absolute coordinates. )
|
||||||
|
G00 S20000 ( RPM spindle speed. )
|
||||||
|
G64 P0.05000 ( set maximum deviation from commanded toolpath )
|
||||||
|
G01 F200.00000 ( Feedrate. )
|
||||||
|
|
||||||
|
|
||||||
|
G00 Z30.00000 (Retract to tool change height)
|
||||||
|
T1
|
||||||
|
M5 (Spindle stop.)
|
||||||
|
G04 P1.00000 (Wait for spindle to stop)
|
||||||
|
(MSG, Change tool bit to cutter diameter 1.00000mm)
|
||||||
|
M6 (Tool change.)
|
||||||
|
M0 (Temporary machine stop.)
|
||||||
|
M3 ( Spindle on clockwise. )
|
||||||
|
G04 P1.00000 (Wait for spindle to get up to speed)
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G00 Z2.60000 ( retract )
|
||||||
|
|
||||||
|
G00 X-0.52495 Y1.02502 ( rapid move to begin. )
|
||||||
|
G01 Z-0.47500 F60.00000 ( plunge. )
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y42.76186
|
||||||
|
G01 X-0.52495 Y44.76186
|
||||||
|
G01 X-0.52495 Y86.49871
|
||||||
|
G01 X-0.53458 Y86.59627
|
||||||
|
G01 X-0.56303 Y86.69007
|
||||||
|
G01 X-0.60923 Y86.77651
|
||||||
|
G01 X-0.67141 Y86.85228
|
||||||
|
G01 X-0.74718 Y86.91446
|
||||||
|
G01 X-0.83361 Y86.96066
|
||||||
|
G01 X-0.92742 Y86.98911
|
||||||
|
G01 X-1.02498 Y86.99873
|
||||||
|
G01 X-46.98758 Y86.99873
|
||||||
|
G01 X-48.98758 Y86.99873
|
||||||
|
G01 X-94.95019 Y86.99873
|
||||||
|
G01 X-95.04772 Y86.98911
|
||||||
|
G01 X-95.14153 Y86.96066
|
||||||
|
G01 X-95.22796 Y86.91446
|
||||||
|
G01 X-95.30373 Y86.85228
|
||||||
|
G01 X-95.36591 Y86.77651
|
||||||
|
G01 X-95.41211 Y86.69007
|
||||||
|
G01 X-95.44056 Y86.59627
|
||||||
|
G01 X-95.45019 Y86.49871
|
||||||
|
G01 X-95.45019 Y1.02502
|
||||||
|
G01 X-95.44056 Y0.92748
|
||||||
|
G01 X-95.41211 Y0.83368
|
||||||
|
G01 X-95.36591 Y0.74724
|
||||||
|
G01 X-95.30373 Y0.67147
|
||||||
|
G01 X-95.22796 Y0.60930
|
||||||
|
G01 X-95.14153 Y0.56309
|
||||||
|
G01 X-95.04772 Y0.53465
|
||||||
|
G01 X-94.95019 Y0.52502
|
||||||
|
G01 X-48.98758 Y0.52502
|
||||||
|
G01 X-46.98758 Y0.52502
|
||||||
|
G01 X-1.02498 Y0.52502
|
||||||
|
G01 X-0.92742 Y0.53465
|
||||||
|
G01 X-0.83361 Y0.56309
|
||||||
|
G01 X-0.74718 Y0.60930
|
||||||
|
G01 X-0.67141 Y0.67147
|
||||||
|
G01 X-0.60923 Y0.74724
|
||||||
|
G01 X-0.56303 Y0.83368
|
||||||
|
G01 X-0.53458 Y0.92748
|
||||||
|
G01 X-0.52495 Y1.02502
|
||||||
|
G01 Z-0.95000 F60.00000 ( plunge. )
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y42.76186
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-0.52495 Y44.76186
|
||||||
|
G01 Z-0.95000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y86.49871
|
||||||
|
G01 X-0.53458 Y86.59627
|
||||||
|
G01 X-0.56303 Y86.69007
|
||||||
|
G01 X-0.60923 Y86.77651
|
||||||
|
G01 X-0.67141 Y86.85228
|
||||||
|
G01 X-0.74718 Y86.91446
|
||||||
|
G01 X-0.83361 Y86.96066
|
||||||
|
G01 X-0.92742 Y86.98911
|
||||||
|
G01 X-1.02498 Y86.99873
|
||||||
|
G01 X-46.98758 Y86.99873
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-48.98758 Y86.99873
|
||||||
|
G01 Z-0.95000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-94.95019 Y86.99873
|
||||||
|
G01 X-95.04772 Y86.98911
|
||||||
|
G01 X-95.14153 Y86.96066
|
||||||
|
G01 X-95.22796 Y86.91446
|
||||||
|
G01 X-95.30373 Y86.85228
|
||||||
|
G01 X-95.36591 Y86.77651
|
||||||
|
G01 X-95.41211 Y86.69007
|
||||||
|
G01 X-95.44056 Y86.59627
|
||||||
|
G01 X-95.45019 Y86.49871
|
||||||
|
G01 X-95.45019 Y1.02502
|
||||||
|
G01 X-95.44056 Y0.92748
|
||||||
|
G01 X-95.41211 Y0.83368
|
||||||
|
G01 X-95.36591 Y0.74724
|
||||||
|
G01 X-95.30373 Y0.67147
|
||||||
|
G01 X-95.22796 Y0.60930
|
||||||
|
G01 X-95.14153 Y0.56309
|
||||||
|
G01 X-95.04772 Y0.53465
|
||||||
|
G01 X-94.95019 Y0.52502
|
||||||
|
G01 X-48.98758 Y0.52502
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-46.98758 Y0.52502
|
||||||
|
G01 Z-0.95000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-1.02498 Y0.52502
|
||||||
|
G01 X-0.92742 Y0.53465
|
||||||
|
G01 X-0.83361 Y0.56309
|
||||||
|
G01 X-0.74718 Y0.60930
|
||||||
|
G01 X-0.67141 Y0.67147
|
||||||
|
G01 X-0.60923 Y0.74724
|
||||||
|
G01 X-0.56303 Y0.83368
|
||||||
|
G01 X-0.53458 Y0.92748
|
||||||
|
G01 X-0.52495 Y1.02502
|
||||||
|
G01 Z-1.42500 F60.00000 ( plunge. )
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y42.76186
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-0.52495 Y44.76186
|
||||||
|
G01 Z-1.42500 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y86.49871
|
||||||
|
G01 X-0.53458 Y86.59627
|
||||||
|
G01 X-0.56303 Y86.69007
|
||||||
|
G01 X-0.60923 Y86.77651
|
||||||
|
G01 X-0.67141 Y86.85228
|
||||||
|
G01 X-0.74718 Y86.91446
|
||||||
|
G01 X-0.83361 Y86.96066
|
||||||
|
G01 X-0.92742 Y86.98911
|
||||||
|
G01 X-1.02498 Y86.99873
|
||||||
|
G01 X-46.98758 Y86.99873
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-48.98758 Y86.99873
|
||||||
|
G01 Z-1.42500 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-94.95019 Y86.99873
|
||||||
|
G01 X-95.04772 Y86.98911
|
||||||
|
G01 X-95.14153 Y86.96066
|
||||||
|
G01 X-95.22796 Y86.91446
|
||||||
|
G01 X-95.30373 Y86.85228
|
||||||
|
G01 X-95.36591 Y86.77651
|
||||||
|
G01 X-95.41211 Y86.69007
|
||||||
|
G01 X-95.44056 Y86.59627
|
||||||
|
G01 X-95.45019 Y86.49871
|
||||||
|
G01 X-95.45019 Y1.02502
|
||||||
|
G01 X-95.44056 Y0.92748
|
||||||
|
G01 X-95.41211 Y0.83368
|
||||||
|
G01 X-95.36591 Y0.74724
|
||||||
|
G01 X-95.30373 Y0.67147
|
||||||
|
G01 X-95.22796 Y0.60930
|
||||||
|
G01 X-95.14153 Y0.56309
|
||||||
|
G01 X-95.04772 Y0.53465
|
||||||
|
G01 X-94.95019 Y0.52502
|
||||||
|
G01 X-48.98758 Y0.52502
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-46.98758 Y0.52502
|
||||||
|
G01 Z-1.42500 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-1.02498 Y0.52502
|
||||||
|
G01 X-0.92742 Y0.53465
|
||||||
|
G01 X-0.83361 Y0.56309
|
||||||
|
G01 X-0.74718 Y0.60930
|
||||||
|
G01 X-0.67141 Y0.67147
|
||||||
|
G01 X-0.60923 Y0.74724
|
||||||
|
G01 X-0.56303 Y0.83368
|
||||||
|
G01 X-0.53458 Y0.92748
|
||||||
|
G01 X-0.52495 Y1.02502
|
||||||
|
G01 Z-1.90000 F60.00000 ( plunge. )
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y42.76186
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-0.52495 Y44.76186
|
||||||
|
G01 Z-1.90000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-0.52495 Y86.49871
|
||||||
|
G01 X-0.53458 Y86.59627
|
||||||
|
G01 X-0.56303 Y86.69007
|
||||||
|
G01 X-0.60923 Y86.77651
|
||||||
|
G01 X-0.67141 Y86.85228
|
||||||
|
G01 X-0.74718 Y86.91446
|
||||||
|
G01 X-0.83361 Y86.96066
|
||||||
|
G01 X-0.92742 Y86.98911
|
||||||
|
G01 X-1.02498 Y86.99873
|
||||||
|
G01 X-46.98758 Y86.99873
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-48.98758 Y86.99873
|
||||||
|
G01 Z-1.90000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-94.95019 Y86.99873
|
||||||
|
G01 X-95.04772 Y86.98911
|
||||||
|
G01 X-95.14153 Y86.96066
|
||||||
|
G01 X-95.22796 Y86.91446
|
||||||
|
G01 X-95.30373 Y86.85228
|
||||||
|
G01 X-95.36591 Y86.77651
|
||||||
|
G01 X-95.41211 Y86.69007
|
||||||
|
G01 X-95.44056 Y86.59627
|
||||||
|
G01 X-95.45019 Y86.49871
|
||||||
|
G01 X-95.45019 Y1.02502
|
||||||
|
G01 X-95.44056 Y0.92748
|
||||||
|
G01 X-95.41211 Y0.83368
|
||||||
|
G01 X-95.36591 Y0.74724
|
||||||
|
G01 X-95.30373 Y0.67147
|
||||||
|
G01 X-95.22796 Y0.60930
|
||||||
|
G01 X-95.14153 Y0.56309
|
||||||
|
G01 X-95.04772 Y0.53465
|
||||||
|
G01 X-94.95019 Y0.52502
|
||||||
|
G01 X-48.98758 Y0.52502
|
||||||
|
G00 Z-0.90000
|
||||||
|
G01 X-46.98758 Y0.52502
|
||||||
|
G01 Z-1.90000 F60.00000
|
||||||
|
G01 F200.00000
|
||||||
|
G01 X-1.02498 Y0.52502
|
||||||
|
G01 X-0.92742 Y0.53465
|
||||||
|
G01 X-0.83361 Y0.56309
|
||||||
|
G01 X-0.74718 Y0.60930
|
||||||
|
G01 X-0.67141 Y0.67147
|
||||||
|
G01 X-0.60923 Y0.74724
|
||||||
|
G01 X-0.56303 Y0.83368
|
||||||
|
G01 X-0.53458 Y0.92748
|
||||||
|
G01 X-0.52495 Y1.02502
|
||||||
|
|
||||||
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
||||||
|
G00 Z30.000000 ( retract )
|
||||||
|
|
||||||
|
M5 ( Spindle off. )
|
||||||
|
G04 P1.000000
|
||||||
|
M9 ( Coolant off. )
|
||||||
|
M2 ( Program end. )
|
||||||
|
|
||||||
569
power-supply-board_v1.0/pcb2gcode/out/processed_back_final.svg
Normal file
569
power-supply-board_v1.0/pcb2gcode/out/processed_back_final.svg
Normal file
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 995 KiB |
881
power-supply-board_v1.0/pcb2gcode/out/processed_front_final.svg
Normal file
881
power-supply-board_v1.0/pcb2gcode/out/processed_front_final.svg
Normal file
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 1.3 MiB |
1
power-supply-board_v1.0/pcb2gcode/run.sh
Executable file
1
power-supply-board_v1.0/pcb2gcode/run.sh
Executable file
@ -0,0 +1 @@
|
|||||||
|
../../utils/run-pcb2gcode.sh
|
||||||
808
utils/mill_flat_pcb-slot/205x120.dxf
Normal file
808
utils/mill_flat_pcb-slot/205x120.dxf
Normal file
@ -0,0 +1,808 @@
|
|||||||
|
999
|
||||||
|
FreeCAD v1.0 38806 (Git)
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
HEADER
|
||||||
|
9
|
||||||
|
$ACADVER
|
||||||
|
1
|
||||||
|
AC1014
|
||||||
|
9
|
||||||
|
$ACADMAINTVER
|
||||||
|
70
|
||||||
|
9
|
||||||
|
9
|
||||||
|
$DWGCODEPAGE
|
||||||
|
3
|
||||||
|
ANSI_1252
|
||||||
|
9
|
||||||
|
$TEXTSTYLE
|
||||||
|
7
|
||||||
|
STANDARD
|
||||||
|
9
|
||||||
|
$DIMSTYLE
|
||||||
|
2
|
||||||
|
STANDARD
|
||||||
|
9
|
||||||
|
$DIMTXSTY
|
||||||
|
7
|
||||||
|
STANDARD
|
||||||
|
9
|
||||||
|
$CMLSTYLE
|
||||||
|
2
|
||||||
|
STANDARD
|
||||||
|
9
|
||||||
|
$LUNITS
|
||||||
|
70
|
||||||
|
2
|
||||||
|
9
|
||||||
|
$INSUNITS
|
||||||
|
70
|
||||||
|
4
|
||||||
|
9
|
||||||
|
$PEXTMAX
|
||||||
|
10
|
||||||
|
50
|
||||||
|
20
|
||||||
|
50
|
||||||
|
30
|
||||||
|
50
|
||||||
|
9
|
||||||
|
$PEXTMIN
|
||||||
|
10
|
||||||
|
0
|
||||||
|
20
|
||||||
|
0
|
||||||
|
30
|
||||||
|
0
|
||||||
|
9
|
||||||
|
$HANDSEED
|
||||||
|
5
|
||||||
|
FFFF
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
CLASSES
|
||||||
|
0
|
||||||
|
CLASS
|
||||||
|
1
|
||||||
|
ACDBDICTIONARYWDFLT
|
||||||
|
2
|
||||||
|
AcDbDictionaryWithDefault
|
||||||
|
3
|
||||||
|
ObjectDBX Classes
|
||||||
|
90
|
||||||
|
0
|
||||||
|
280
|
||||||
|
0
|
||||||
|
281
|
||||||
|
0
|
||||||
|
0
|
||||||
|
CLASS
|
||||||
|
1
|
||||||
|
XRECORD
|
||||||
|
2
|
||||||
|
AcDbXrecord
|
||||||
|
3
|
||||||
|
ObjectDBX Classes
|
||||||
|
90
|
||||||
|
0
|
||||||
|
280
|
||||||
|
0
|
||||||
|
281
|
||||||
|
0
|
||||||
|
0
|
||||||
|
CLASS
|
||||||
|
1
|
||||||
|
LWPOLYLINE
|
||||||
|
2
|
||||||
|
AcDbPolyline
|
||||||
|
3
|
||||||
|
ObjectDBX Classes
|
||||||
|
90
|
||||||
|
0
|
||||||
|
280
|
||||||
|
0
|
||||||
|
281
|
||||||
|
1
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
TABLES
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
VPORT
|
||||||
|
5
|
||||||
|
20
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
1
|
||||||
|
0
|
||||||
|
VPORT
|
||||||
|
5
|
||||||
|
21
|
||||||
|
330
|
||||||
|
20
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbViewportTableRecord
|
||||||
|
2
|
||||||
|
*ACTIVE
|
||||||
|
70
|
||||||
|
0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
LTYPE
|
||||||
|
5
|
||||||
|
22
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
1
|
||||||
|
0
|
||||||
|
LTYPE
|
||||||
|
5
|
||||||
|
23
|
||||||
|
330
|
||||||
|
21
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbLinetypeTableRecord
|
||||||
|
2
|
||||||
|
BYBLOCK
|
||||||
|
70
|
||||||
|
0
|
||||||
|
3
|
||||||
|
|
||||||
|
72
|
||||||
|
65
|
||||||
|
73
|
||||||
|
0
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
0
|
||||||
|
LTYPE
|
||||||
|
5
|
||||||
|
24
|
||||||
|
330
|
||||||
|
21
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbLinetypeTableRecord
|
||||||
|
2
|
||||||
|
BYLAYER
|
||||||
|
70
|
||||||
|
0
|
||||||
|
3
|
||||||
|
|
||||||
|
72
|
||||||
|
65
|
||||||
|
73
|
||||||
|
0
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
0
|
||||||
|
LTYPE
|
||||||
|
5
|
||||||
|
25
|
||||||
|
330
|
||||||
|
21
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbLinetypeTableRecord
|
||||||
|
2
|
||||||
|
CONTINUOUS
|
||||||
|
70
|
||||||
|
0
|
||||||
|
3
|
||||||
|
Solid line
|
||||||
|
72
|
||||||
|
65
|
||||||
|
73
|
||||||
|
0
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
LAYER
|
||||||
|
5
|
||||||
|
A0C
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
2
|
||||||
|
0
|
||||||
|
LAYER
|
||||||
|
5
|
||||||
|
A0D
|
||||||
|
330
|
||||||
|
A0C
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbLayerTableRecord
|
||||||
|
2
|
||||||
|
0
|
||||||
|
70
|
||||||
|
0
|
||||||
|
62
|
||||||
|
7
|
||||||
|
6
|
||||||
|
CONTINUOUS
|
||||||
|
0
|
||||||
|
LAYER
|
||||||
|
5
|
||||||
|
A0E
|
||||||
|
330
|
||||||
|
A0C
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbLayerTableRecord
|
||||||
|
2
|
||||||
|
View
|
||||||
|
70
|
||||||
|
0
|
||||||
|
62
|
||||||
|
7
|
||||||
|
6
|
||||||
|
CONTINUOUS
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
STYLE
|
||||||
|
5
|
||||||
|
70
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
2
|
||||||
|
0
|
||||||
|
STYLE
|
||||||
|
5
|
||||||
|
71
|
||||||
|
330
|
||||||
|
70
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbTextStyleTableRecord
|
||||||
|
2
|
||||||
|
STANDARD
|
||||||
|
70
|
||||||
|
0
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
41
|
||||||
|
1.0
|
||||||
|
50
|
||||||
|
0.0
|
||||||
|
71
|
||||||
|
0
|
||||||
|
42
|
||||||
|
2.5
|
||||||
|
3
|
||||||
|
arial.ttf
|
||||||
|
4
|
||||||
|
|
||||||
|
0
|
||||||
|
STYLE
|
||||||
|
5
|
||||||
|
72
|
||||||
|
330
|
||||||
|
70
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbTextStyleTableRecord
|
||||||
|
2
|
||||||
|
ANNOTATIVE
|
||||||
|
70
|
||||||
|
0
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
41
|
||||||
|
1.0
|
||||||
|
50
|
||||||
|
0.0
|
||||||
|
71
|
||||||
|
0
|
||||||
|
42
|
||||||
|
2.5
|
||||||
|
3
|
||||||
|
arial.ttf
|
||||||
|
4
|
||||||
|
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
VIEW
|
||||||
|
5
|
||||||
|
73
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
UCS
|
||||||
|
5
|
||||||
|
74
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
APPID
|
||||||
|
5
|
||||||
|
75
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
2
|
||||||
|
0
|
||||||
|
APPID
|
||||||
|
5
|
||||||
|
76
|
||||||
|
330
|
||||||
|
75
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbRegAppTableRecord
|
||||||
|
2
|
||||||
|
ACAD
|
||||||
|
70
|
||||||
|
0
|
||||||
|
0
|
||||||
|
APPID
|
||||||
|
5
|
||||||
|
77
|
||||||
|
330
|
||||||
|
75
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbRegAppTableRecord
|
||||||
|
2
|
||||||
|
ACADANNOTATIVE
|
||||||
|
70
|
||||||
|
0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
DIMSTYLE
|
||||||
|
5
|
||||||
|
78
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
2
|
||||||
|
0
|
||||||
|
DIMSTYLE
|
||||||
|
105
|
||||||
|
79
|
||||||
|
330
|
||||||
|
78
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbDimStyleTableRecord
|
||||||
|
2
|
||||||
|
STANDARD
|
||||||
|
70
|
||||||
|
0
|
||||||
|
3
|
||||||
|
|
||||||
|
4
|
||||||
|
|
||||||
|
5
|
||||||
|
|
||||||
|
6
|
||||||
|
|
||||||
|
7
|
||||||
|
|
||||||
|
40
|
||||||
|
0.0
|
||||||
|
41
|
||||||
|
2.5
|
||||||
|
42
|
||||||
|
0.625
|
||||||
|
43
|
||||||
|
3.75
|
||||||
|
44
|
||||||
|
1.25
|
||||||
|
45
|
||||||
|
0.0
|
||||||
|
46
|
||||||
|
0.0
|
||||||
|
47
|
||||||
|
0.0
|
||||||
|
48
|
||||||
|
0.0
|
||||||
|
140
|
||||||
|
2.5
|
||||||
|
141
|
||||||
|
2.5
|
||||||
|
142
|
||||||
|
0.0
|
||||||
|
143
|
||||||
|
0.03937007874016
|
||||||
|
144
|
||||||
|
1.0
|
||||||
|
145
|
||||||
|
0.0
|
||||||
|
146
|
||||||
|
1.0
|
||||||
|
147
|
||||||
|
0.625
|
||||||
|
71
|
||||||
|
0
|
||||||
|
72
|
||||||
|
0
|
||||||
|
73
|
||||||
|
0
|
||||||
|
74
|
||||||
|
0
|
||||||
|
75
|
||||||
|
0
|
||||||
|
76
|
||||||
|
0
|
||||||
|
77
|
||||||
|
1
|
||||||
|
78
|
||||||
|
8
|
||||||
|
170
|
||||||
|
0
|
||||||
|
171
|
||||||
|
3
|
||||||
|
172
|
||||||
|
1
|
||||||
|
173
|
||||||
|
0
|
||||||
|
174
|
||||||
|
0
|
||||||
|
175
|
||||||
|
0
|
||||||
|
176
|
||||||
|
0
|
||||||
|
177
|
||||||
|
0
|
||||||
|
178
|
||||||
|
0
|
||||||
|
270
|
||||||
|
2
|
||||||
|
271
|
||||||
|
2
|
||||||
|
272
|
||||||
|
2
|
||||||
|
273
|
||||||
|
2
|
||||||
|
274
|
||||||
|
3
|
||||||
|
340
|
||||||
|
71
|
||||||
|
275
|
||||||
|
0
|
||||||
|
280
|
||||||
|
0
|
||||||
|
281
|
||||||
|
0
|
||||||
|
282
|
||||||
|
0
|
||||||
|
283
|
||||||
|
0
|
||||||
|
284
|
||||||
|
8
|
||||||
|
285
|
||||||
|
0
|
||||||
|
286
|
||||||
|
0
|
||||||
|
287
|
||||||
|
3
|
||||||
|
288
|
||||||
|
0
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
TABLE
|
||||||
|
2
|
||||||
|
BLOCK_RECORD
|
||||||
|
5
|
||||||
|
A01
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbSymbolTable
|
||||||
|
70
|
||||||
|
5
|
||||||
|
0
|
||||||
|
BLOCK_RECORD
|
||||||
|
5
|
||||||
|
A02
|
||||||
|
330
|
||||||
|
A01
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbBlockTableRecord
|
||||||
|
2
|
||||||
|
*MODEL_SPACE
|
||||||
|
0
|
||||||
|
BLOCK_RECORD
|
||||||
|
5
|
||||||
|
A03
|
||||||
|
330
|
||||||
|
A01
|
||||||
|
100
|
||||||
|
AcDbSymbolTableRecord
|
||||||
|
100
|
||||||
|
AcDbBlockTableRecord
|
||||||
|
2
|
||||||
|
*PAPER_SPACE
|
||||||
|
0
|
||||||
|
ENDTAB
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
BLOCKS
|
||||||
|
0
|
||||||
|
BLOCK
|
||||||
|
5
|
||||||
|
A04
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbBlockBegin
|
||||||
|
2
|
||||||
|
*MODEL_SPACE
|
||||||
|
70
|
||||||
|
0
|
||||||
|
10
|
||||||
|
0
|
||||||
|
20
|
||||||
|
0
|
||||||
|
30
|
||||||
|
0
|
||||||
|
3
|
||||||
|
*MODEL_SPACE
|
||||||
|
1
|
||||||
|
|
||||||
|
0
|
||||||
|
ENDBLK
|
||||||
|
5
|
||||||
|
A05
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbBlockEnd
|
||||||
|
0
|
||||||
|
BLOCK
|
||||||
|
5
|
||||||
|
A06
|
||||||
|
330
|
||||||
|
A03
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
67
|
||||||
|
1
|
||||||
|
8
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbBlockBegin
|
||||||
|
2
|
||||||
|
*PAPER_SPACE
|
||||||
|
70
|
||||||
|
0
|
||||||
|
10
|
||||||
|
0
|
||||||
|
20
|
||||||
|
0
|
||||||
|
30
|
||||||
|
0
|
||||||
|
3
|
||||||
|
*PAPER_SPACE
|
||||||
|
1
|
||||||
|
|
||||||
|
0
|
||||||
|
ENDBLK
|
||||||
|
5
|
||||||
|
A07
|
||||||
|
330
|
||||||
|
A03
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
67
|
||||||
|
1
|
||||||
|
8
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbBlockEnd
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
ENTITIES
|
||||||
|
0
|
||||||
|
LINE
|
||||||
|
5
|
||||||
|
A08
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
View
|
||||||
|
100
|
||||||
|
AcDbLine
|
||||||
|
10
|
||||||
|
107.500000000
|
||||||
|
20
|
||||||
|
88.500000000
|
||||||
|
30
|
||||||
|
0.000000000
|
||||||
|
11
|
||||||
|
107.500000000
|
||||||
|
21
|
||||||
|
208.500000000
|
||||||
|
31
|
||||||
|
0.000000000
|
||||||
|
0
|
||||||
|
LINE
|
||||||
|
5
|
||||||
|
A09
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
View
|
||||||
|
100
|
||||||
|
AcDbLine
|
||||||
|
10
|
||||||
|
107.500000000
|
||||||
|
20
|
||||||
|
208.500000000
|
||||||
|
30
|
||||||
|
0.000000000
|
||||||
|
11
|
||||||
|
312.500000000
|
||||||
|
21
|
||||||
|
208.500000000
|
||||||
|
31
|
||||||
|
0.000000000
|
||||||
|
0
|
||||||
|
LINE
|
||||||
|
5
|
||||||
|
A0A
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
View
|
||||||
|
100
|
||||||
|
AcDbLine
|
||||||
|
10
|
||||||
|
312.500000000
|
||||||
|
20
|
||||||
|
208.500000000
|
||||||
|
30
|
||||||
|
0.000000000
|
||||||
|
11
|
||||||
|
312.500000000
|
||||||
|
21
|
||||||
|
88.500000000
|
||||||
|
31
|
||||||
|
0.000000000
|
||||||
|
0
|
||||||
|
LINE
|
||||||
|
5
|
||||||
|
A0B
|
||||||
|
330
|
||||||
|
A02
|
||||||
|
100
|
||||||
|
AcDbEntity
|
||||||
|
8
|
||||||
|
View
|
||||||
|
100
|
||||||
|
AcDbLine
|
||||||
|
10
|
||||||
|
312.500000000
|
||||||
|
20
|
||||||
|
88.500000000
|
||||||
|
30
|
||||||
|
0.000000000
|
||||||
|
11
|
||||||
|
107.500000000
|
||||||
|
21
|
||||||
|
88.500000000
|
||||||
|
31
|
||||||
|
0.000000000
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
SECTION
|
||||||
|
2
|
||||||
|
OBJECTS
|
||||||
|
0
|
||||||
|
DICTIONARY
|
||||||
|
5
|
||||||
|
F000
|
||||||
|
330
|
||||||
|
0
|
||||||
|
100
|
||||||
|
AcDbDictionary
|
||||||
|
3
|
||||||
|
ACAD_GROUP
|
||||||
|
350
|
||||||
|
F001
|
||||||
|
0
|
||||||
|
DICTIONARY
|
||||||
|
5
|
||||||
|
F001
|
||||||
|
330
|
||||||
|
F000
|
||||||
|
100
|
||||||
|
AcDbDictionary
|
||||||
|
0
|
||||||
|
ENDSEC
|
||||||
|
0
|
||||||
|
EOF
|
||||||
BIN
utils/mill_flat_pcb-slot/205x120.e10
Normal file
BIN
utils/mill_flat_pcb-slot/205x120.e10
Normal file
Binary file not shown.
80
utils/mill_flat_pcb-slot/205x120x09.din
Normal file
80
utils/mill_flat_pcb-slot/205x120x09.din
Normal file
@ -0,0 +1,80 @@
|
|||||||
|
%
|
||||||
|
(Project 205x120)
|
||||||
|
(Created by Estlcam version 11 build 11.035)
|
||||||
|
(Machining time about 00:03:07 hours)
|
||||||
|
|
||||||
|
(Required tools:)
|
||||||
|
(Schaftfraeser 6mm)
|
||||||
|
|
||||||
|
G90
|
||||||
|
T4 M06 S20000
|
||||||
|
M03
|
||||||
|
G00 Z-5.0000
|
||||||
|
|
||||||
|
|
||||||
|
(No. 1: Ausschnitt 1)
|
||||||
|
G00 X3.6000 Y8.7000
|
||||||
|
G00 Z-0.5000
|
||||||
|
G01 Z0.9000 F6.000 S20000
|
||||||
|
G01 X201.4000 F30.000
|
||||||
|
G01 Y14.1000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y19.5000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y24.9000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y30.3000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y35.7000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y41.1000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y46.5000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y51.9000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y57.3000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y62.7000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y68.1000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y73.5000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y78.9000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y84.3000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y89.7000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y95.1000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y100.5000
|
||||||
|
G01 X3.6000
|
||||||
|
G01 Y105.9000
|
||||||
|
G01 X201.4000
|
||||||
|
G01 Y111.3000
|
||||||
|
G01 X3.6000
|
||||||
|
G00 Z-5.0000
|
||||||
|
G00 Z-0.5000
|
||||||
|
G01 Z0.9000 F6.000
|
||||||
|
G01 X3.0000 F30.000
|
||||||
|
G01 Y117.0000
|
||||||
|
G01 X2.1213 Y117.8787
|
||||||
|
G01 X3.0000 Y117.0000
|
||||||
|
G01 X202.0000
|
||||||
|
G01 X202.8787 Y117.8787
|
||||||
|
G01 X202.0000 Y117.0000
|
||||||
|
G01 Y3.0000
|
||||||
|
G01 X202.8787 Y2.1213
|
||||||
|
G01 X202.0000 Y3.0000
|
||||||
|
G01 X3.0000
|
||||||
|
G01 X2.1213 Y2.1213
|
||||||
|
G01 X3.0000 Y3.0000
|
||||||
|
G01 Y111.3000
|
||||||
|
G01 X3.6000
|
||||||
|
G00 Z-5.0000
|
||||||
|
G00 X0.0000 Y0.0000
|
||||||
|
|
||||||
|
M05
|
||||||
|
M30
|
||||||
@ -118,7 +118,9 @@ if check_file "$NPTH_DRILL_FILE"; then
|
|||||||
echo "==> run.sh: Appending NPTH drill file to config..."
|
echo "==> run.sh: Appending NPTH drill file to config..."
|
||||||
# rename original drill debug output image
|
# rename original drill debug output image
|
||||||
echo "drill=$NPTH_DRILL_FILE" >> "$TEMP_CONFIG"
|
echo "drill=$NPTH_DRILL_FILE" >> "$TEMP_CONFIG"
|
||||||
|
echo "outline=$OUTLINE_FILE" >> "$TEMP_CONFIG" #note: outline needed for matching gcode origin
|
||||||
echo "drill-output=$NPTH_DRILL_OUT_FILE" >> "$TEMP_CONFIG"
|
echo "drill-output=$NPTH_DRILL_OUT_FILE" >> "$TEMP_CONFIG"
|
||||||
|
echo "output-dir=$OUTPUT_DIR" >> "$TEMP_CONFIG"
|
||||||
echo "==> run.sh: Renaming drill debug image from previous run..."
|
echo "==> run.sh: Renaming drill debug image from previous run..."
|
||||||
mv "$OUTPUT_DIR"/original_drill.svg "$OUTPUT_DIR"/original_drill_normal.svg
|
mv "$OUTPUT_DIR"/original_drill.svg "$OUTPUT_DIR"/original_drill_normal.svg
|
||||||
pcb2gcode --config "$TEMP_CONFIG"
|
pcb2gcode --config "$TEMP_CONFIG"
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user