jonny
|
767fa1c9b3
|
interface-board: Optimize holes, Add text, Add G-code
|
2024-11-17 13:24:02 +01:00 |
|
jonny
|
caf302322b
|
interface-board: Move relays, Optimize for milling, Add pcb2gcode config
|
2024-11-14 13:41:48 +01:00 |
|
jonny
|
57e54e98d2
|
interface-board: Add notes about current limiting diode polarity (did tests)
|
2024-11-13 16:56:04 +01:00 |
|
jonny
|
327100b4f4
|
All boards: Switch to custom mount hole (NPTH with pads) -> no clearance around hole for milling
|
2024-11-12 16:50:19 +01:00 |
|
jonny
|
4390ca41da
|
interface-board: Fix conn routed on wrong side, mark solder other side
|
2024-11-12 13:58:41 +01:00 |
|
jonny
|
dad08d9fe0
|
interface-board: Add Mounting-holes, Optimize terminal pos and gnd plane
|
2024-11-11 13:31:52 +01:00 |
|
jonny
|
6209a9e8f5
|
interface-board: Optimize all tracks -> DRC Pass
|
2024-11-11 11:40:57 +01:00 |
|
jonny
|
e9ceed4b29
|
interface-board: Add testpoints, re-arrange schematic
|
2024-11-11 09:56:28 +01:00 |
|
jonny
|
660e67f9aa
|
interface-board: remove leds, separate supplies, add GND planes
|
2024-11-07 16:56:37 +01:00 |
|
jonny
|
756a329d91
|
Split power-supply-board to separate kicad project
|
2024-11-07 11:28:02 +01:00 |
|
jonny
|
7028ce5b21
|
Route 40pin connector, minor optimizations
|
2024-11-07 10:59:45 +01:00 |
|
jonny
|
5b18f4c926
|
Route supply board
|
2024-11-07 09:05:57 +01:00 |
|
jonny
|
9f26edd141
|
Layout: arrange supply board, fan control, CAD: update pcb, add fan
|
2024-11-06 16:40:37 +01:00 |
|
jonny
|
62bda72500
|
Add fan control schematic + graphs
|
2024-11-06 12:34:45 +01:00 |
|
jonny
|
809ed4212f
|
Assign shop links to parts ("Datasheet"), Validate footprints
|
2024-11-05 14:59:01 +01:00 |
|
jonny
|
d3a8e706cb
|
Change/Add power output termminals, Add FreeCAD assembly file
|
2024-11-04 16:54:53 +01:00 |
|
jonny
|
248b8905c4
|
Create more terminal footprints, Route voltage regulators
|
2024-11-04 14:17:18 +01:00 |
|
jonny
|
2cb07029d2
|
Add supply connectors, change to 10x2 con (din), Optimize/continue routing
|
2024-11-04 11:38:57 +01:00 |
|
jonny
|
6fc69b1d7f
|
Add dip-sw relay, buzzer; Route Relay; Start routing 40 pin connector (proof of concept)
|
2024-10-31 16:43:25 +01:00 |
|
jonny
|
a621766b2b
|
Add UART <> RS485 jumper, Re-assign header pins
|
2024-10-31 13:11:43 +01:00 |
|
jonny
|
55134e2d46
|
Create footprints for 2.5 WAGO + Add 3d models, Change arrangement connector
|
2024-10-31 10:46:31 +01:00 |
|
jonny
|
38fc5947ba
|
Optimize / compress layout (Analog, Digital in) -> vertical D, R
|
2024-10-30 15:39:33 +01:00 |
|
jonny
|
8dc3a19aea
|
8xDig-in: Add Dip-switches (EN-Filter), re-arrange groups on pcb
|
2024-10-30 12:56:57 +01:00 |
|
jonny
|
55d8794eea
|
8xDig-in: remove 2x gate R, use R networks, arrange + test-routing
|
2024-10-30 11:25:45 +01:00 |
|
jonny
|
d99aececc6
|
Adc: Add dip-sw, re-assign; Layout: Arrange+Route analog input (testing)
|
2024-10-29 14:46:57 +01:00 |
|
jonny
|
5c69293904
|
layout: Route 8x out, Arrange 2x PWM, Arrange 2x Relay
|
2024-10-29 10:07:24 +01:00 |
|
jonny
|
905ca617e3
|
Add 2xLED layout, test-route 8x out, Switch to DIP R-array
|
2024-10-28 16:38:46 +01:00 |
|
jonny
|
c6b66db295
|
Add external led-boards, Add custom R-network symbol
|
2024-10-28 13:34:58 +01:00 |
|
jonny
|
4f53fd26e5
|
Create custom terminal footprints, Add WAGO 3d-models
|
2024-10-25 13:34:23 +02:00 |
|
jonny
|
ab7c20787b
|
layout: place and group footprints as in schematic
|
2024-10-24 17:03:59 +02:00 |
|
jonny
|
4bffd07f62
|
Add optocouplers to PWM output, arrangement
|
2024-10-24 15:07:07 +02:00 |
|
jonny
|
b3455c31e7
|
Assign footprints (testing), Create pcb outline
|
2024-10-24 14:04:11 +02:00 |
|
jonny
|
8f1a55a689
|
Add Terminals, ADC leds, Outsource Digital-input protection
|
2024-10-24 12:24:19 +02:00 |
|
jonny
|
07f2e770ad
|
Add RS485, I2C protection, Optimize 24V Input protection
|
2024-10-23 16:50:03 +02:00 |
|
jonny
|
96cebc9e0a
|
Add LEDs, Assign adcs, Add darlingtion base-R
Add Leds to Analog inputs, Digital outputs, Relays and digital inputs
Select specific led (color, size) and define series resistor
|
2024-10-23 11:41:41 +02:00 |
|
jonny
|
38a31a8aa5
|
Optimize adc opamp schematic-layout
|
2024-10-22 16:54:57 +02:00 |
|
jonny
|
9689515195
|
Add 2x high-power output (pwm, mosfet driver), Relay, Darlington array, Assign pins
|
2024-10-22 16:21:53 +02:00 |
|
jonny
|
b60d5368fd
|
Add 1x Digital-Input (0-100V, optocoupler, LED)
|
2024-10-22 13:29:31 +02:00 |
|
jonny
|
a8211ad8a8
|
Add shift-register (placed)
|
2024-10-21 16:56:15 +02:00 |
|
jonny
|
a90e626594
|
Add 8x opamp ADC buffer + protection, -5V supply
|
2024-10-21 16:15:09 +02:00 |
|
jonny
|
f11d90e074
|
Assign some pins, Add available parts, ADC input divider
|
2024-10-18 14:11:18 +02:00 |
|
jonny
|
a5ceac9b7b
|
Create pcb project, Add power supplies
|
2024-10-17 17:00:14 +02:00 |
|