j/rpi-interface-board
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
rpi-interface-board/README.md
jonny 820e4af1a9 REWORK README WIP
2025-01-23 14:48:50 +01:00

5.7 KiB
Raw Blame History

Raspberry Pi Extension board

A custom PLC-like system based on the Raspberry Pi.
With a custom interface board a raspberry pi is extended with protected I/O, bus systems, analog inputs and Relay or PWM outputs. All components including a display are housed in a custom designed enclosure.

The project is intended for versatile use in prototyping and project development.

Photo of all hardware components

All Components (Disassembled)

Repository Content

  • KiCad Projects: 3 KiCad projects with schematics and PCB layouts for the custom pcbs created.
  • Housing: Custom enclosure design for PCBs and Raspberry Pi created in FreeCAD.
  • Software/Firmware: Python scripts for operating and testing the PCB features (WIP).

Features Overview

This project provides:

  • Protected GPIO I/O for Raspberry Pi.
  • Various analog inputs
  • Flexible power supply options. (3.3 V, 5 V, -5 V, 12 V, 24 V outputs)
  • Relay and MOSFET control.
  • Integrated LEDs for status indication.
  • RS485, I2C, SPI, and UART bus communication.

Detailed features of each PCB are described in the respective sections below.

Designed PCBs

1. Raspberry Pi Interface Board

This board connects to the Raspberry Pi via a 40-pin ribbon cable and provides protected GPIO extensions and versatile input/output features.

Photo

Raspberry Pi Interface Board

Features

Inputs:

  • 8x Digital Inputs:

    • Wide continous voltage range (-1.7V to 120V), idea: compatible with 3V and 24V devices.
    • TVS diodes for ESD and spike protection.
    • Reverse polarity protection
    • Isolated with optocouplers.
    • Optional low-pass filters (toggle via DIP switches).

  • **8x Analog Inputs

    • Different fixed range inputs:
      • 2x 0 - 3.3 V
      • 2x 0 - 5 V
      • 1x 0 - 12 V
      • 1x 0 - 24 V
      • 2x 0 - 20 mA
    • Overvoltage protection with clamping diodes.
    • Optional low-pass filters (toggle via DIP switches).

Outputs:

  • 1x onboard buzzer.
  • 2x 16A relays.
  • 2x high-power MOSFETs (N-channel, max 55V, 33A continuous, 160A pulsed).
  • 8x digital outputs (via shift register):
    • Low-power (30mA push-pull) and high-power (500mA open-drain) outputs.
    • Buzzer and relays connected to channels 6-8, with enable/disable switches.
    • Note: Outputs are not short-circuit proof.

General:

  • WAGO spring-loaded terminals for easy wiring.
  • JST connectors for external LEDs for all inputs and outputs indicate the current pin state.

Bus Communication:

  • RS485 (TVS protection, idle pullup/pulldown, 120Ω terminator).
  • UART (unprotected).
  • I2C (TVS diodes, 2.2k pullups).
  • SPI (unprotected). Note: Either RS485 or UART can be used at the same time (select with jumpers)

Schematic and Layout

Schematic PCB Layout

2. Power Supply Board

Creates different voltages from supplied 24V. Supply for the rpi interface board as well as several terminals for variable use (connect sensors, devices etc to the housing)

Photo

Power Supply Board

Features

Input:

  • 24V 5A barrel plug.
  • 5A self-resetting polyfuse.
  • Reverse polarity protection.

Output:

  • 3.3V, 3A (buck converter).
  • 5V, 5A (buck converter).
  • -5V, 20mA (charge pump).
  • 12V, 3A (buck converter).
  • 24V (supply voltage filtered).

Fan Control:

  • 2x connector for 10k NTC.
  • Threshold adjustable (trim poti).
  • Hysteresis adjustable (trim poti).
  • select between 5V or 12V Fan.

General:

  • Spring-loaded terminals for each voltage.
  • Combined internal terminals for all voltages.

Schematic and Layout

Schematic PCB Layout

3. LED Boards

Small PCBs with LEDs, resistors, and mounting holes for housing indicators.

Photo

LED Boards

Boards

  1. 2x 5mm LEDs for relays.
  2. 2x 5mm LEDs for PWM outputs.
  3. 8x 3mm yellow LEDs for analog inputs.
  4. 8x 3mm orange LEDs for digital inputs.
  5. 8x 3mm red LEDs for digital outputs.

Schematic and Layout

Schematic PCB Layout

Software/Firmware

Python code for operating the extension PCBs (e.g., GPIO pins, shift registers, ADC, and bus communication). This section is a work in progress (WIP), and example scripts will be added as development continues.

Housing

Custom-designed enclosure includes:

  • Ports for Raspberry Pi.
  • Banana sockets for power outputs.
  • Exposed screw terminals.
  • Openings for buttons and LEDs.
  • Mounts for all PCBs and wiring.
3d-model

Dropped Features

The following ideas were considered but not implemented:

  • UI Input Elements:
    • Buttons, DIP switches, temperature sensors, encoders, or potentiometers.
  • USB or battery-powered operation:
    • Battery packs with BMS and voltage measurement.
  • Li-ion cell holders.