j/rpi-interface-board
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
rpi-interface-board/pi-interface-board_v1.0/pcb2gcode/notes.md

662 B
Raw Blame History

Notes about milling pcb pi-interface-board_v1.0

2024.11.17:

  • used 30 degree bit - worked well at first
  • slightly milled screw due to accidential clerance around mounting screw (zone not connected) - fixed
  • needed second pass due to tip getting shorter at the end and only scratching the copper
    • re-started at about 70% of gcode (worked)

notes about kicad export (general)

  • dont tick "use gerber X2 format (recommended)" to prevent many unsupported warnings
  • dont tick unnecessary plot xx options e.g. "plot footprint text" it might cause hangup
  • if oval holes are present select "Use alternative drill mode" option in generate drill files menu